16 CFR 1500.91 - Determinations regarding lead content for certain materials or products under section 101 of the...

Code of Federal Regulations, 2012 CFR

2012-01-01

... paper which become part of the substrate. (6) CMYK process printing inks (excluding spot colors, other inks that are not used in CMYK process, inks that do not become part of the substrate under 16 CFR part 1303, and inks used in after-treatment applications, including screen prints, transfers, decals, or...

16 CFR 1500.91 - Determinations regarding lead content for certain materials or products under section 101 of the...

Code of Federal Regulations, 2014 CFR

2014-01-01

... paper which become part of the substrate. (6) CMYK process printing inks (excluding spot colors, other inks that are not used in CMYK process, inks that do not become part of the substrate under 16 CFR part 1303, and inks used in after-treatment applications, including screen prints, transfers, decals, or...

16 CFR § 1500.91 - Determinations regarding lead content for certain materials or products under section 101 of the...

Code of Federal Regulations, 2013 CFR

2013-01-01

... paper which become part of the substrate. (6) CMYK process printing inks (excluding spot colors, other inks that are not used in CMYK process, inks that do not become part of the substrate under 16 CFR part 1303, and inks used in after-treatment applications, including screen prints, transfers, decals, or...

16 CFR 1500.91 - Determinations regarding lead content for certain materials or products under section 101 of the...

Code of Federal Regulations, 2011 CFR

2011-01-01

... paper which become part of the substrate. (6) CMYK process printing inks (excluding spot colors, other inks that are not used in CMYK process, inks that do not become part of the substrate under 16 CFR part 1303, and inks used in after-treatment applications, including screen prints, transfers, decals, or...

Graduated driver licensing decal law: effect on young probationary drivers.

PubMed

Curry, Allison E; Pfeiffer, Melissa R; Localio, Russell; Durbin, Dennis R

2013-01-01

Decal laws have been implemented internationally to facilitate police enforcement of graduated driver licensing (GDL) restrictions (e.g., passenger limit, nighttime curfew) but have not been evaluated. New Jersey implemented the first decal law in the U.S. on May 1, 2010. The aim of this study was to evaluate the effect of New Jersey's law on the rate of citations issued for violation of GDL restrictions and police-reported crashes among probationary drivers aged <21 years and to estimate the number of probationary drivers whose crashes were prevented by the law. New Jersey's licensing and crash databases were linked from January 1, 2008 to May 31, 2011, and each driver's license status, age, and outcome status were ascertained for each month. Monthly rates were calculated as the proportion of probationary drivers who experienced the outcome in that month. The pre-law period was defined as January 2008-January 2010 and the post-law period as May 2010-May 2011. Negative binomial regression models with robust SEs were used to determine the law's effect on crash and citation rates (adjusted for gender, seasonal trends, and overall trends) and estimate prevented crashes. Analyses were conducted in 2012. In the first year post-law, there was a 14% increase in the GDL citation rate (adjusted rate ratio 1.14 [95% CI=1.05, 1.24]); a 9% reduction in the police-reported crash rate (adjusted rate ratio 0.91 [95% CI=0.86, 0.97]), and an estimated 1624 young probationary drivers for whom a crash was prevented. Findings suggest that the law is positively affecting probationary drivers' safety. Results contribute to building the evidence base for the effectiveness of decal laws and provide valuable information to U.S. and international policymakers who are considering adding decal laws to enhance existing GDL laws. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Spatially Targeted Activation of a Shape Memory, Polymer-Based, Reconfigurable Skin System

DTIC Science & Technology

2014-02-01

bone samples described in ASTM Standard D638 using a CNC router. Compression test samples were cured in an aluminum cylinder mold treated with mold...release with Teflon end plugs and cut to length with a small lathe . 2.2 Tensile/Compressive Tests Tensile tests were conducted on a MTS QTest/1L...fixture with a CNC mill and a decal applied to the front surface for tracking by the DIC system. Figure 10: Shear Test Sample with DIC Decal 10

STS-41 MS Melnick displays US Coast Guard decal on OV-103's middeck

NASA Image and Video Library

1990-10-10

STS041-06-029 (10 Oct 1990) --- STS-41 Mission Specialist (MS) Bruce E. Melnick, who is a graduate of the Coast Guard Academy and the first ever active Coast Guardsman to fly in space, draws attention to his branch of the service, while posing next to a banner from his Alma Mater (on locker MF57K) and a United States (U.S.) Coast Guard decal (on the Solid Surface Combustion Experiment (SSCE)). Behind Melnick are the starboard wall-mounted sleep restraints. Insignias belonging to other crewmembers are displayed on the lockers including University of Missouri Rolla and U.S. Marine Corps.

KSC-2013-2483

NASA Image and Video Library

2013-05-29

VANDENBERG AFB, Calif. - A mission logo decal for the launch of NASA's IRIS solar observatory aboard an Orbital Sciences Pegasus XL rocket. The decal is on the side of the Pegasus. Engineers are working inside a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

KSC-2013-2484

NASA Image and Video Library

2013-05-29

VANDENBERG AFB, Calif. - A mission logo decal for the launch of NASA's IRIS solar observatory aboard an Orbital Sciences Pegasus XL rocket. The decal is on the side of the Pegasus. Engineers are working inside a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

16 CFR 1210.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... visual effects, or that depicts (logos, decals, art work, etc.) or resembles in physical form or function... produce a flame; and produces an audible or visual signal that will be clearly discernible when the...

16 CFR 1210.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... visual effects, or that depicts (logos, decals, art work, etc.) or resembles in physical form or function... produce a flame; and produces an audible or visual signal that will be clearly discernible when the...

16 CFR § 1210.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... visual effects, or that depicts (logos, decals, art work, etc.) or resembles in physical form or function... produce a flame; and produces an audible or visual signal that will be clearly discernible when the...

77 FR 58354 - Foreign-Trade Zone 265-Conroe, TX; Notification of Proposed Production Activity, Bauer...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

..., packing crates, decals, textile straps, mirrors, insulation, articles of steel (shapes, angles, bars, rods...-conditioner components, heat exchangers, filters, fire extinguishers, hydraulic jacks/hoists, parts of boring...

29 CFR 1926.1412 - Inspections.

Code of Federal Regulations, 2013 CFR

2013-07-01

... conditions, and proper operation. (vii) Chains and chain drive sprockets for excessive wear of sprockets and excessive chain stretch. (viii) Travel steering, brakes, and locking devices, for proper operation. (ix... decals originally supplied with the equipment by the manufacturer or otherwise required under this...

29 CFR 1926.1412 - Inspections.

Code of Federal Regulations, 2014 CFR

2014-07-01

... conditions, and proper operation. (vii) Chains and chain drive sprockets for excessive wear of sprockets and excessive chain stretch. (viii) Travel steering, brakes, and locking devices, for proper operation. (ix... decals originally supplied with the equipment by the manufacturer or otherwise required under this...

29 CFR 1926.1412 - Inspections.

Code of Federal Regulations, 2012 CFR

2012-07-01

... conditions, and proper operation. (vii) Chains and chain drive sprockets for excessive wear of sprockets and excessive chain stretch. (viii) Travel steering, brakes, and locking devices, for proper operation. (ix... decals originally supplied with the equipment by the manufacturer or otherwise required under this...

29 CFR 1926.1412 - Inspections.

Code of Federal Regulations, 2011 CFR

2011-07-01

... conditions, and proper operation. (vii) Chains and chain drive sprockets for excessive wear of sprockets and excessive chain stretch. (viii) Travel steering, brakes, and locking devices, for proper operation. (ix... decals originally supplied with the equipment by the manufacturer or otherwise required under this...

Barratt signs mission decal in the JEM during Joint Operations

NASA Image and Video Library

2009-07-25

S127-E-008623 (25 July 2009) --- Flight day 11 activities for the joint shuttle-station crews included the traditional autographing of the station. Astronaut Mike Barratt, Expedition 20 flight engineer, has the pen in this frame. Photo credit: NASA

STS-106 Planning Flight Control Team in WFCR, building 30S

NASA Image and Video Library

2000-09-11

JSC2000-06242 (13 September 2000) --- Flight Director Kelly Beck (planning) is surrounded by the almost five dozen flight controllers who are supporting her shift during the current STS-106 mission. Beck is holding a large decal of the STS-106 insignia.

Astronauts Onizuka and Shriver pose in middeck

NASA Technical Reports Server (NTRS)

1985-01-01

Mission specialist Ellison S. Onizuka, wearing the Kamakze headband, appears to be keeping a sleeping Loren J. Shriver, pilot, from floating in his sleep restraints through the middeck of the Discovery during the 51-C mission. Behind them is a decal which reads 'Aim High, Air Force'.

16 CFR 1210.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... which this regulation applies. (d) Novelty lighter means a lighter that has entertaining audio or visual effects, or that depicts (logos, decals, art work, etc.) or resembles in physical form or function... produce a flame; and produces an audible or visual signal that will be clearly discernible when the...

78 FR 37785 - Foreign-Trade Zone (FTZ) 196-Fort Worth, Texas; Notification of Proposed Production Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... carrying cases, wrist straps, screws, power supplies, nickel/ cadmium batteries, lithium/ion batteries, other batteries, antenna assemblies, audio flex assemblies, bridge flex assemblies, interplex assembly... components and materials sourced from abroad include: labels, battery adhesives, decals, Kevlar protective...

41 CFR 102-34.100 - Where is motor vehicle identification displayed?

Code of Federal Regulations, 2014 CFR

2014-01-01

... MANAGEMENT Identifying and Registering Motor Vehicles Motor Vehicle Identification § 102-34.100 Where is motor vehicle identification displayed? Motor vehicle identification is displayed as follows: (a) For... Government motor vehicles may display motor vehicle identification on a decal in the rear window, or centered...

41 CFR 102-34.100 - Where is motor vehicle identification displayed?

Code of Federal Regulations, 2013 CFR

2013-07-01

... MANAGEMENT Identifying and Registering Motor Vehicles Motor Vehicle Identification § 102-34.100 Where is motor vehicle identification displayed? Motor vehicle identification is displayed as follows: (a) For... Government motor vehicles may display motor vehicle identification on a decal in the rear window, or centered...

41 CFR 102-34.100 - Where is motor vehicle identification displayed?

Code of Federal Regulations, 2011 CFR

2011-01-01

... MANAGEMENT Identifying and Registering Motor Vehicles Motor Vehicle Identification § 102-34.100 Where is motor vehicle identification displayed? Motor vehicle identification is displayed as follows: (a) For... Government motor vehicles may display motor vehicle identification on a decal in the rear window, or centered...

41 CFR 102-34.100 - Where is motor vehicle identification displayed?

Code of Federal Regulations, 2012 CFR

2012-01-01

... MANAGEMENT Identifying and Registering Motor Vehicles Motor Vehicle Identification § 102-34.100 Where is motor vehicle identification displayed? Motor vehicle identification is displayed as follows: (a) For... Government motor vehicles may display motor vehicle identification on a decal in the rear window, or centered...

10. PAYLOAD CONTROL CONSOLE NEAR SOUTH WALL OF SLC3W CONTROL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. PAYLOAD CONTROL CONSOLE NEAR SOUTH WALL OF SLC-3W CONTROL ROOM. DECALS ON CONSOLE IN FOREGROUND INDICATE PAYLOAD PROGRAMS LAUNCHED FROM SLC-3W. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

78 FR 66252 - Airworthiness Directives; Bell Helicopter Textron Canada Limited (Bell) Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-05

... actions are intended to alert pilots to avoid certain engine speeds during steady- state operations...%. The proposed requirements were intended to alert pilots to avoid certain engine speeds during steady... the RFMs, advising pilots of the change, and installing a decal as described in Bell Alert Service...

8 CFR 287.11 - Pre-enrolled Access Lane.

Code of Federal Regulations, 2011 CFR

2011-01-01

... prevent any person from passing through the checkpoint in the regular traffic lanes. (2) Only United... the Service for use in the PAL program. (5) Enrolled participants may be issued an identification... authorized persons and vehicles use the PAL. (7) All devices, decals, or other equipment, methodology, or...

8 CFR 287.11 - Pre-enrolled Access Lane.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., decals, devices, technology, or methodology it deems necessary on registered vehicles to ensure that only... technology used to identify persons or vehicles using a Pre-enrolled Access Lane remain the property of the..., methodology, or technology. If a vehicle is sold or otherwise disposed of, it is the responsibility of the...

Authentic Text Types and Corresponding Activities: A List for the Foreign Language Instructor.

ERIC Educational Resources Information Center

Geltrich-Ludgate, Brigitta; Tovar, Deanna

1987-01-01

The study of authentic texts gives students the opportunity to become functional in target-language situations. An exhaustive alphabetical list of authentic text types and corresponding learning activities are presented. Text types include: advertisements, bank materials, bills and receipts, calendars, captions, comics, commercials, decals, forms,…

Thin Film Catalyst Layers for Direct Methanol Fuel Cells

NASA Technical Reports Server (NTRS)

Witham, C. K.; Chun, W.; Ruiz, R.; Valdez, T. I.; Narayanan, S. R.

2000-01-01

One of the primary obstacles to the widespread use of the direct methanol fuel cell (DMFC) is the high cost of the catalyst. Therefore, reducing the catalyst loading well below the current level of 8-12 mg/cm 2 would be important to commercialization. The current methods for preparation of catalyst layers consisting of catalyst, ionomer and sometimes a hydrophobic additive are applied by either painting, spraying, decal transfer or screen printing processes. Sputter deposition is a coating technique widely used in manufacturing and therefore particularly attractive. In this study we have begun to explore sputtering as a method for catalyst deposition. Present experiments focus on Pt-Ru catalyst layers for the anode.

75 FR 12670 - Airworthiness Directives; The Boeing Company Model 767 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... joints, the skin at certain external approved repairs, the skin around external features such as antennas... antennas, and at locations where external decals had been cut. We are issuing this AD to detect and correct... skin at certain external approved repairs, the skin around external features such as antennas, and the...

Alternative Fuels Data Center

Science.gov Websites

, certain buses, or commercial vehicles that are powered by an alternative fuel, if the vehicles obtain an (GVW) Type of Vehicle Decal Fee 18,000 pounds (lbs.) or less Passenger, School Bus, or Commercial $75 vehicles, buses, or commercial motor vehicles that are powered by compressed natural gas (CNG), liquefied

78 FR 65206 - Airworthiness Directives; Bell Helicopter Textron Canada Limited (Bell) Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... engine speeds during steady- state operations. These actions are intended to alert pilots to avoid... intended to alert pilots to avoid certain engine speeds during steady- state operations, prevent failure of... decal as described in Bell Alert Service Bulletin (ASB) No. 430-05-34, dated June 10, 2005 (ASB 430-05...

78 FR 65202 - Airworthiness Directives; Bell Helicopter Textron Canada Limited (Bell) Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... engine speeds during steady-state operations. These actions are intended to alert pilots to avoid certain... operation between speeds of 71% and 92%. The proposed requirements were intended to alert pilots to avoid... amending the RFM, advising pilots of the change, and installing a decal as described in Bell Alert Service...

78 FR 65200 - Airworthiness Directives; Bell Helicopter Textron Canada Limited (Bell) Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... vibrations at certain engine speeds during steady- state operations. These actions are intended to alert... proposed requirements were intended to alert pilots to avoid certain engine speeds during steady-state... the change, and installing a decal as described in Bell Alert Service Bulletin (ASB) No. 407-05-67...

Decal transfer microfabrication

DOEpatents

Nuzzo, Ralph G.; Childs, William Robert

2004-10-19

A method of making a microstructure includes forming a pattern in a surface of a silicon-containing elastomer, oxidizing the pattern, contacting the pattern with a substrate; and bonding the oxidized pattern and the substrate such that the pattern and the substrate are irreversibly attached. The silicon-containing elastomer may be removably attached to a transfer pad.

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

First Discoveries of z > 6 Quasars with the DECam Legacy Survey and UKIRT Hemisphere Survey

NASA Astrophysics Data System (ADS)

Wang, Feige; Fan, Xiaohui; Yang, Jinyi; Wu, Xue-Bing; Yang, Qian; Bian, Fuyan; McGreer, Ian D.; Li, Jiang-Tao; Li, Zefeng; Ding, Jiani; Dey, Arjun; Dye, Simon; Findlay, Joseph R.; Green, Richard; James, David; Jiang, Linhua; Lang, Dustin; Lawrence, Andy; Myers, Adam D.; Ross, Nicholas P.; Schlegel, David J.; Shanks, Tom

2017-04-01

We present the first discoveries from a survey of z ≳ 6 quasars using imaging data from the DECam Legacy Survey (DECaLS) in the optical, the UKIRT Deep Infrared Sky Survey (UKIDSS) and a preliminary version of the UKIRT Hemisphere Survey (UHS) in the near-IR, and ALLWISE in the mid-IR. DECaLS will image 9000 deg2 of sky down to z AB ˜ 23.0, and UKIDSS and UHS will map the northern sky at 0 < decl. < +60°, reaching J VEGA ˜ 19.6 (5-σ). The combination of these data sets allows us to discover quasars at redshift z ≳ 7 and to conduct a complete census of the faint quasar population at z ≳ 6. In this paper, we report on the selection method of our search, and on the initial discoveries of two new, faint z ≳ 6 quasars and one new z = 6.63 quasar in our pilot spectroscopic observations. The two new z ˜ 6 quasars are at z = 6.07 and z = 6.17 with absolute magnitudes at rest-frame wavelength 1450 Å being M 1450 = -25.83 and M 1450 = -25.76, respectively. These discoveries suggest that we can find quasars close to or fainter than the break magnitude of the Quasar Luminosity Function (QLF) at z ≳ 6. The new z = 6.63 quasar has an absolute magnitude of M 1450 = -25.95. This demonstrates the potential of using the combined DECaLS and UKIDSS/UHS data sets to find z ≳ 7 quasars. Extrapolating from previous QLF measurements, we predict that these combined data sets will yield ˜200 z ˜ 6 quasars to z AB < 21.5, ˜1000 z ˜ 6 quasars to z AB < 23, and ˜30 quasars at z > 6.5 to J VEGA < 19.5.

First Discoveries of z > 6 Quasars with the DECam Legacy Survey and UKIRT Hemisphere Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Feige; Fan, Xiaohui; Yang, Jinyi

In this paper, we present the first discoveries from a survey of z ≳ 6 quasars using imaging data from the DECam Legacy Survey (DECaLS) in the optical, the UKIRT Deep Infrared Sky Survey (UKIDSS) and a preliminary version of the UKIRT Hemisphere Survey (UHS) in the near-IR, and ALLWISE in the mid-IR. DECaLS will image 9000 deg 2 of sky down to z AB ~ 23.0, and UKIDSS and UHS will map the northern sky at 0 < decl. < +60°, reaching J VEGA ~ 19.6 (5-σ). The combination of these data sets allows us to discover quasars atmore » redshift z ≳ 7 and to conduct a complete census of the faint quasar population at z ≳ 6. In this paper, we report on the selection method of our search, and on the initial discoveries of two new, faint z ≳ 6 quasars and one new z = 6.63 quasar in our pilot spectroscopic observations. The two new z ~ 6 quasars are at z = 6.07 and z = 6.17 with absolute magnitudes at rest-frame wavelength 1450 Å being M 1450 = -25.83 and M 1450 = -25.76, respectively. These discoveries suggest that we can find quasars close to or fainter than the break magnitude of the Quasar Luminosity Function (QLF) at z ≳ 6. The new z = 6.63 quasar has an absolute magnitude of M 1450 = -25.95. This demonstrates the potential of using the combined DECaLS and UKIDSS/UHS data sets to find z ≳ 7 quasars. Finally, extrapolating from previous QLF measurements, we predict that these combined data sets will yield ~200 z ~ 6 quasars to z AB < 21.5, ~1000 z ~ 6 quasars to z AB < 23, and ~30 quasars at z > 6.5 to J VEGA < 19.5.« less

First Discoveries of z > 6 Quasars with the DECam Legacy Survey and UKIRT Hemisphere Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Feige; Yang, Jinyi; Wu, Xue-Bing

We present the first discoveries from a survey of z ≳ 6 quasars using imaging data from the DECam Legacy Survey (DECaLS) in the optical, the UKIRT Deep Infrared Sky Survey (UKIDSS) and a preliminary version of the UKIRT Hemisphere Survey (UHS) in the near-IR, and ALLWISE in the mid-IR. DECaLS will image 9000 deg{sup 2} of sky down to z {sub AB} ∼ 23.0, and UKIDSS and UHS will map the northern sky at 0 < decl. < +60°, reaching J {sub VEGA} ∼ 19.6 (5- σ ). The combination of these data sets allows us to discover quasarsmore » at redshift z ≳ 7 and to conduct a complete census of the faint quasar population at z ≳ 6. In this paper, we report on the selection method of our search, and on the initial discoveries of two new, faint z ≳ 6 quasars and one new z = 6.63 quasar in our pilot spectroscopic observations. The two new z ∼ 6 quasars are at z = 6.07 and z = 6.17 with absolute magnitudes at rest-frame wavelength 1450 Å being M {sub 1450} = −25.83 and M {sub 1450} = −25.76, respectively. These discoveries suggest that we can find quasars close to or fainter than the break magnitude of the Quasar Luminosity Function (QLF) at z ≳ 6. The new z = 6.63 quasar has an absolute magnitude of M {sub 1450} = −25.95. This demonstrates the potential of using the combined DECaLS and UKIDSS/UHS data sets to find z ≳ 7 quasars. Extrapolating from previous QLF measurements, we predict that these combined data sets will yield ∼200 z ∼ 6 quasars to z {sub AB} < 21.5, ∼1000 z ∼ 6 quasars to z {sub AB} < 23, and ∼30 quasars at z > 6.5 to J {sub VEGA} < 19.5.« less

First Discoveries of z > 6 Quasars with the DECam Legacy Survey and UKIRT Hemisphere Survey

DOE PAGES

Wang, Feige; Fan, Xiaohui; Yang, Jinyi; ...

2017-04-11

In this paper, we present the first discoveries from a survey of z ≳ 6 quasars using imaging data from the DECam Legacy Survey (DECaLS) in the optical, the UKIRT Deep Infrared Sky Survey (UKIDSS) and a preliminary version of the UKIRT Hemisphere Survey (UHS) in the near-IR, and ALLWISE in the mid-IR. DECaLS will image 9000 deg 2 of sky down to z AB ~ 23.0, and UKIDSS and UHS will map the northern sky at 0 < decl. < +60°, reaching J VEGA ~ 19.6 (5-σ). The combination of these data sets allows us to discover quasars atmore » redshift z ≳ 7 and to conduct a complete census of the faint quasar population at z ≳ 6. In this paper, we report on the selection method of our search, and on the initial discoveries of two new, faint z ≳ 6 quasars and one new z = 6.63 quasar in our pilot spectroscopic observations. The two new z ~ 6 quasars are at z = 6.07 and z = 6.17 with absolute magnitudes at rest-frame wavelength 1450 Å being M 1450 = -25.83 and M 1450 = -25.76, respectively. These discoveries suggest that we can find quasars close to or fainter than the break magnitude of the Quasar Luminosity Function (QLF) at z ≳ 6. The new z = 6.63 quasar has an absolute magnitude of M 1450 = -25.95. This demonstrates the potential of using the combined DECaLS and UKIDSS/UHS data sets to find z ≳ 7 quasars. Finally, extrapolating from previous QLF measurements, we predict that these combined data sets will yield ~200 z ~ 6 quasars to z AB < 21.5, ~1000 z ~ 6 quasars to z AB < 23, and ~30 quasars at z > 6.5 to J VEGA < 19.5.« less

Georgia's Pre-K Professional Development Evaluation: Final Report. Publication #2015-02

ERIC Educational Resources Information Center

Early, Diane M.; Maxwell, Kelly L.; Skinner, Debra; Kraus, Syndee; Hume, Katie; Pan, Yi

2014-01-01

Georgia has been at the forefront of the pre-kindergarten movement since implementing its pre-k program in 1992 and creating the nation's first state-funded universal pre-k program in 1995. Georgia's Pre-K, administered by "Bright from the Start: Georgia Department of Early Care and Learning" (DECAL), aims to provide high-quality…

41 CFR 102-34.100 - Where is motor vehicle identification displayed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Government motor vehicles may display motor vehicle identification on a decal in the rear window, or centered on both front doors if the vehicle is without a rear window, or where identification on the rear window would not be easily seen. (b) For trailers, on both sides of the front quarter of the trailer in a...

STS-33 MS Musgrave and MS Carter perform balancing act on OV-103's middeck

NASA Technical Reports Server (NTRS)

1989-01-01

STS-33 Mission Specialist (MS) F. Story Musgrave demonstrates a microgravity trick by balancing MS Manley L. Carter, Jr on his index finger. During the performance on Discovery's, Orbiter Vehicle (OV) 103's, middeck, Carter freefloats at the middeck ceiling while Musgrave supports him from underneath. On the forward middeck lockers is a PURDUE Boilermakers decal.

KSC-2009-2323

NASA Image and Video Library

2009-03-18

CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility in Titusville, Fla., technicians apply the NOAA decal to the fairing that will encapsulate the GOES-O satellite during launch. The latest Geostationary Operational Environmental Satellite, GOES-O was developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. The GOES satellites continuously provide observations of 60 percent of the Earth including the continental United States, providing weather monitoring and forecast operations as well as a continuous and reliable stream of environmental information and severe weather warnings. Once in orbit, GOES-O will be designated GOES-14, and NASA will provide on-orbit checkout and then transfer operational responsibility to NOAA. The GOES-O satellite is targeted to launch April 28 onboard a United Launch Alliance Delta IV expendable launch vehicle. Photo credit: NASA/Kim Shiflett

STS-26 MS Nelson adjusts ADSF power cable on Discovery's middeck

NASA Technical Reports Server (NTRS)

1988-01-01

STS-26 Mission Specialist (MS) George D. Nelson adjusts power cable on automated directional solidification furnace (ADSF) support electronics package. ADSF is located in forward (starboard side) lockers on Discovery's, Orbiter Vehicle (OV) 103's, middeck. ADSF consists of the furnace container (left) and the control electronics container (right). An Air National Guard, Houston, Texas, decal appears on middeck locker above ADSF.

Some Consequences of Some Assumptions with Respect to the Physical Decal of a Chamber Aerosol Cloud

DTIC Science & Technology

1963-12-01

RESPECT TO THE PHYSICAL DECAY OF A CHAMBER AEROSOL CLOUD* Theodore W. Horner* Project Statistician, Booz-Allen Applied Research, Inc. 4815 Rugby Avenue...recovery percentage at time t is 0 Nf(r) h(r, t) ars (r, t) dr (1) B-(t) B1 r, t) S0 , where B’r, t) is the biological recovery percentage for

A method to transfer speckle patterns for digital image correlation

NASA Astrophysics Data System (ADS)

Chen, Zhenning; Quan, Chenggen; Zhu, Feipeng; He, Xiaoyuan

2015-09-01

A simple and repeatable speckle creation method based on water transfer printing (WTP) is proposed to reduce artificial measurement error for digital image correlation (DIC). This technique requires water, brush, and a piece of transfer paper that is made of prefabricated decal paper, a protected sheet, and printed speckle patterns. The speckle patterns are generated and optimized via computer simulations, and then printed on the decal paper. During the experiments, operators can moisten the basement with water and the brush, so that digital patterns can be simply transferred to the carriers’ surfaces. Tensile experiments with an extended three-dimensional (3D) DIC system are performed to test and verify the validity of WTP patterns. It is shown that by comparing with a strain gage, the strain error is less than 50μɛ in a uniform tensile test. From five carbon steel tensile experiments, Lüders bands in both WTP patterns and spray paint patterns are demonstrated to propagate symmetrically. In the necking part where the strain is up to 66%, WTP patterns are proved to adhere to the specimens well. Hence, WTP patterns are capable of maintaining coherence and adherence to the specimen surface. The transfer paper, working as the role of strain gage in the electrometric method, will contribute to speckle creation.

Decal transfer lithography

DOEpatents

Nuzzo, Ralph G.; Childs, William R.; Motala, Michael J.; Lee, Keon Jae

2010-02-16

A method of making a microstructure includes selectively activating a portion of a surface of a silicon-containing elastomer, contacting the activated portion with a substance, and bonding the activated portion and the substance, such that the activated portion of the surface and the substance in contact with the activated portion are irreversibly attached. The selective activation may be accomplished by positioning a mask on the surface of the silicon-containing elastomer, and irradiating the exposed portion with UV radiation.

Close-up locker scene of material belonging to Payload specialist Neri

NASA Technical Reports Server (NTRS)

1985-01-01

Close-up locker scene of materials belonging to Payload specialist Rodolfo Neri. Items include a Morelos satellite decal, the crest of the Universidad Nacional Autonoma de Mexico (Neri's alma mater), and one of the plant experiments he monitored during the flight. The experiment at bottom frame is the Transportation of Nutrients in a Weightless Environment (TRANSPORT). A pair of scissors are on the locker and a pen floats above it.

STS-38 Pilot Culbertson removes film from an OV-104 middeck stowage locker

NASA Technical Reports Server (NTRS)

1990-01-01

STS-38 Pilot Frank L. Culbertson removes photographic film from stowage locker MF43E located on the middeck of Atlantis, Orbiter Vehicle (OV) 104. Additional items fastened to the forward lockers include a doll, meal tray assemblies, a SONY Walkman, a camera lens, and a Department of Air Force insignia (decal). The crew escape pole (CEP) extends over Culbertson's head and the open airlock hatch appears behind him.

Laser-induced Forward Transfer of Ag Nanopaste.

PubMed

Breckenfeld, Eric; Kim, Heungsoo; Auyeung, Raymond C Y; Piqué, Alberto

2016-03-31

Over the past decade, there has been much development of non-lithographic methods(1-3) for printing metallic inks or other functional materials. Many of these processes such as inkjet(3) and laser-induced forward transfer (LIFT)(4) have become increasingly popular as interest in printable electronics and maskless patterning has grown. These additive manufacturing processes are inexpensive, environmentally friendly, and well suited for rapid prototyping, when compared to more traditional semiconductor processing techniques. While most direct-write processes are confined to two-dimensional structures and cannot handle materials with high viscosity (particularly inkjet), LIFT can transcend both constraints if performed properly. Congruent transfer of three dimensional pixels (called voxels), also referred to as laser decal transfer (LDT)(5-9), has recently been demonstrated with the LIFT technique using highly viscous Ag nanopastes to fabricate freestanding interconnects, complex voxel shapes, and high-aspect-ratio structures. In this paper, we demonstrate a simple yet versatile process for fabricating a variety of micro- and macroscale Ag structures. Structures include simple shapes for patterning electrical contacts, bridging and cantilever structures, high-aspect-ratio structures, and single-shot, large area transfers using a commercial digital micromirror device (DMD) chip.

Laser-induced Forward Transfer of Ag Nanopaste

PubMed Central

Breckenfeld, Eric; Kim, Heungsoo; Auyeung, Raymond C. Y.; Piqué, Alberto

2016-01-01

Over the past decade, there has been much development of non-lithographic methods1-3 for printing metallic inks or other functional materials. Many of these processes such as inkjet3 and laser-induced forward transfer (LIFT)4 have become increasingly popular as interest in printable electronics and maskless patterning has grown. These additive manufacturing processes are inexpensive, environmentally friendly, and well suited for rapid prototyping, when compared to more traditional semiconductor processing techniques. While most direct-write processes are confined to two-dimensional structures and cannot handle materials with high viscosity (particularly inkjet), LIFT can transcend both constraints if performed properly. Congruent transfer of three dimensional pixels (called voxels), also referred to as laser decal transfer (LDT)5-9, has recently been demonstrated with the LIFT technique using highly viscous Ag nanopastes to fabricate freestanding interconnects, complex voxel shapes, and high-aspect-ratio structures. In this paper, we demonstrate a simple yet versatile process for fabricating a variety of micro- and macroscale Ag structures. Structures include simple shapes for patterning electrical contacts, bridging and cantilever structures, high-aspect-ratio structures, and single-shot, large area transfers using a commercial digital micromirror device (DMD) chip. PMID:27077645

Expedition 42 Soyuz TMA-14M Landing

NASA Image and Video Library

2015-03-11

A Russian MI-8 Helicopter is seen through the airport bus decal a day before the Soyuz TMA-14M spacecraft landing with Expedition 42 commander Barry Wilmore of NASA, Alexander Samokutyaev of the Russian Federal Space Agency (Roscosmos) and Elena Serova of Roscosmos Wednesday, March 11, 2015 in Karaganda, Kazakhstan. NASA Astronaut Wilmore, Russian Cosmonauts Samokutyaev and Serova are returning after almost six months onboard the International Space Station where they served as members of the Expedition 41 and 42 crews. Photo Credit: (NASA/Bill Ingalls)

Pilot Fullerton reviews checklist on Aft Flight Deck Onorbit Station

NASA Technical Reports Server (NTRS)

1982-01-01

Pilot Fullerton, wearing communication kit assembly (assy) mini headset, reviews checklist and looks at remote manipulator system (RMS) closed circuit television (CCTV) views displayed on CCTV monitors at Aft Flight Deck Onorbit Station. Taken from the aft flight deck starboard side, Fullerton is seen in front of Panels A7 and A8 with remote manipulator syste (RMS) translation hand control (THC) and RMS rotation hand control (RHC) in the foreground and surrounded by University of Michigan (U of M) GO BLUE and United States Air Force - A Great Way of Life Decals.

KSC-2009-3795

NASA Image and Video Library

2009-06-16

CAPE CANAVERAL, Fla. – This decal will be placed on the Combined Operational Load Bearing External Resistance Treadmill, or C.O.L.B.E.R.T., that will be carried to the International Space Station aboard space shuttle Discovery on the STS-128 mission. The treadmill is in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida and will be placed in the Leonardo multi-purpose logistics module with science and storage racks. The treadmill is named after comedian Stephen Colbert, the host of Comedy Central’s “The Colbert Report.” Colbert urged his viewers to suggest the name “Colbert” as the name for the station’s Node 3 module. Although his name did receive the most entries in an Internet polling contest, NASA chose the name “Tranquility” to honor the accomplishments of the Apollo 11 mission. COLBERT will be installed in Tranquility after the node arrives at the station next year. Launch of STS-128 is targeted for Aug. 7, 2009. Photo credit: NASA/Jim Grossmann

KSC-2009-3796

NASA Image and Video Library

2009-06-16

CAPE CANAVERAL, Fla. – The C.O.L.B.E.R.T decal is placed on the Combined Operational Load Bearing External Resistance Treadmill. The treadmill shares space in the Leonardo multi-purpose logistics module in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. The module is part of the payload for the STS-128 mission to the International Space Station aboard space shuttle Discovery. The treadmill is named after comedian Stephen Colbert, the host of Comedy Central’s “The Colbert Report.” Colbert urged his viewers to suggest the name “Colbert” as the name for the station’s Node 3 module. Although his name did receive the most entries in an Internet polling contest, NASA chose the name “Tranquility” to honor the accomplishments of the Apollo 11 mission. COLBERT will be installed in Tranquility after the node arrives at the station next year. Launch of STS-128 is targeted for Aug. 7, 2009. Photo credit: NASA/Jim Grossmann

STS-40 crewmembers use inflight blood collection system (IBCS) kit on middeck

NASA Technical Reports Server (NTRS)

1991-01-01

STS-40 crewmembers follow procedures for Experiment No. 261, The Influence of Space Flight on Erythrokinetics in Man, while on the middeck of Columbia, Orbiter Vehicle (OV) 102. Payload Specialist F. Drew Gaffney (center) draws blood from Payload Specialist Millie Hughes-Fulford (left) as Mission Specialist (MS) James P. Bagian looks on. The crewmembers are using the inflight blood collection system (IBCS) kit in front of the forward lockers and the orbiter refrigerator freezer (ORF). Displayed on the forward lockers are decals representing the Air Force, the Air Force Reserves (AFRES), University of Tennessee, Colorado State, and Stanford University.

Quasar Photometric Redshifts and Candidate Selection: A New Algorithm Based on Optical and Mid-infrared Photometric Data

NASA Astrophysics Data System (ADS)

Yang, Qian; Wu, Xue-Bing; Fan, Xiaohui; Jiang, Linhua; McGreer, Ian; Green, Richard; Yang, Jinyi; Schindler, Jan-Torge; Wang, Feige; Zuo, Wenwen; Fu, Yuming

2017-12-01

We present a new algorithm to estimate quasar photometric redshifts (photo-zs), by considering the asymmetries in the relative flux distributions of quasars. The relative flux models are built with multivariate Skew-t distributions in the multidimensional space of relative fluxes as a function of redshift and magnitude. For 151,392 quasars in the SDSS, we achieve a photo-z accuracy, defined as the fraction of quasars with the difference between the photo-z z p and the spectroscopic redshift z s , | {{Δ }}z| =| {z}s-{z}p| /(1+{z}s) within 0.1, of 74%. Combining the WISE W1 and W2 infrared data with the SDSS data, the photo-z accuracy is enhanced to 87%. Using the Pan-STARRS1 or DECaLS photometry with WISE W1 and W2 data, the photo-z accuracies are 79% and 72%, respectively. The prior probabilities as a function of magnitude for quasars, stars, and galaxies are calculated, respectively, based on (1) the quasar luminosity function, (2) the Milky Way synthetic simulation with the Besançon model, and (3) the Bayesian Galaxy Photometric Redshift estimation. The relative fluxes of stars are obtained with the Padova isochrones, and the relative fluxes of galaxies are modeled through galaxy templates. We test our classification method to select quasars using the DECaLS g, r, z, and WISE W1 and W2 photometry. The quasar selection completeness is higher than 70% for a wide redshift range 0.5< z< 4.5, and a wide magnitude range 18< r< 21.5 mag. Our photo-z regression and classification method has the potential to extend to future surveys. The photo-z code will be publicly available.

KSC-2009-1529

NASA Image and Video Library

2009-02-10

CAPE CANAVERAL, Fla. – In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center, the Ares I-X mock-up crew module displays the newly applied window decals. Ares I-X is the test flight for the Ares I. The I-X flight will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I. The launch of full-scale Ares I-X, targeted for July 2009, will be the first in a series of unpiloted rocket launches from Kennedy. When fully developed, the 16-foot diameter crew module will furnish living space and reentry protection for the astronauts. Photo credit: NASA/Tim Jacobs

KSC-2009-1528

NASA Image and Video Library

2009-02-10

CAPE CANAVERAL, Fla. – In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center, a worker applies a window decal on the Ares I-X mock-up crew module. Ares I-X is the test flight for the Ares I. The I-X flight will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I. The launch of full-scale Ares I-X, targeted for July 2009, will be the first in a series of unpiloted rocket launches from Kennedy. When fully developed, the 16-foot diameter crew module will furnish living space and reentry protection for the astronauts. Photo credit: NASA/Tim Jacobs

KSC-2009-1527

NASA Image and Video Library

2009-02-10

CAPE CANAVERAL, Fla. – In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center, a worker applies a window decal on the Ares I-X mock-up crew module. Ares I-X is the test flight for the Ares I. The I-X flight will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I. The launch of full-scale Ares I-X, targeted for July 2009, will be the first in a series of unpiloted rocket launches from Kennedy. When fully developed, the 16-foot diameter crew module will furnish living space and reentry protection for the astronauts. Photo credit: NASA/Tim Jacobs

STS-40 crewmembers use inflight blood collection system (IBCS) kit on middeck

NASA Technical Reports Server (NTRS)

1991-01-01

STS-40 crewmembers follow procedures for Experiment No. 261, The Influence of Space Flight on Erythrokinetics in Man, while on the middeck of Columbia, Orbiter Vehicle (OV) 102. Mission Specialist (MS) James P. Bagian (right) draws blood from Payload Specialist F. Drew Gaffney (center) as the second Spacelab Life Sciences 1 (SLS-1) Payload Specialist Millie Hughes-Fulford looks on. The crewmembers are using the inflight blood collection system (IBCS) kit in front of the forward lockers and the orbiter refrigerator freezer (ORF). Displayed on the forward lockers are decals representing the University of Tennessee, Colorado State, and Stanford University and several drink containers.

Surface texturing of fluoropolymers

NASA Technical Reports Server (NTRS)

Banks, B. A.; Mirtich, M. J.; Sovey, J. S. (Inventor)

1982-01-01

A method is disclosed for improving surface texture for adhesive bonding, metal bonding, substrate plating, decal substrate preparation, and biomedical implant applications. The surface to be bonded is dusted in a controlled fashion to produce a disbursed layer of fine mesh particles which serve as masks. The surface texture is produced by impinging gas ions on the masked surface. The textured surface takes the form of pillars or cones. The bonding material, such as a liquid epoxy, flows between the pillars which results in a bond having increased strength. For bonding metals a thin film of metal is vapor or sputter deposited onto the textured surface. Electroplating or electroless plating is then used to increase the metal thickness in the desired amount.

NASA Metrology and Calibration, 1980

NASA Technical Reports Server (NTRS)

1981-01-01

The proceedings of the fourth annual NASA Metrology and Calibration Workshop are presented. This workshop covered (1) review and assessment of NASA metrology and calibration activities by NASA Headquarters, (2) results of audits by the Office of Inspector General, (3) review of a proposed NASA Equipment Management System, (4) current and planned field center activities, (5) National Bureau of Standards (NBS) calibration services for NASA, (6) review of NBS's Precision Measurement and Test Equipment Project activities, (7) NASA instrument loan pool operations at two centers, (8) mobile cart calibration systems at two centers, (9) calibration intervals and decals, (10) NASA Calibration Capabilities Catalog, and (11) development of plans and objectives for FY 1981. Several papers in this proceedings are slide presentations only.

STS-34 crewmembers eat meal on OV-104's middeck

NASA Technical Reports Server (NTRS)

1989-01-01

STS-34 crewmembers, on their first space flight, appear to enjoy mealtime in a zero-gravity environment. They are Pilot Michael J. McCulley and Mission Specialist (MS) Ellen S. Baker. The two, who were in the 1984 class of NASA astronauts, balance their meal trays and attempt to eat in an area of Atlantis', Orbiter Vehicle (OV) 104's, middeck that pays tribute to their astronaut roots. The 'maggot' decal or insignia has direct reference to the group. During the flight, the two made former Astronaut Paul J. Weitz, now JSC Deputy Director, an honorary member of the 1984 class. Weitz's flight suit portrait hangs on the galley facing.

STS-30 MS Cleave uses camcorder to record FEA-2 crystal growth

NASA Image and Video Library

1989-05-08

STS030-10-002 (8 May 1989) --- STS-30 Mission Specialist Mary L. Cleave operates 8mm video camcorder at Fluids Experiment Apparatus 2 (FEA-2) (SK73-000102) unit located in aft middeck locker onboard Atlantis, Orbiter Vehicle (OV) 103. Two 8mm video camcorders are positioned above FEA-2 unit to record experiment titled "Floating Zone Crystal Growth and Purification". Rockwell International (RI) through its Space Transportation Systems Division, Downey, California, is engaged in a joint endeavor agreement (JEA) with NASA's Office of Commercial Programs in the field for floating zone crystal growth research. Utah State University Aggies decal appears on aft bulkhead above FEA-2 unit.

Deep Full-sky Coadds from Three Years of WISE and NEOWISE Observations

DOE PAGES

Meisner, A. M.; Lang, D.; Schlegel, D. J.

2017-09-26

Here, we have reprocessed over 100 terabytes of single-exposure Wide-field Infrared Survey Explorer (WISE)/NEOWISE images to create the deepest ever full-sky maps at 3-5 microns. We include all publicly available W1 and W2 imaging - a total of ~8 million exposures in each band - from ~37 months of observations spanning 2010 January to 2015 December. Our coadds preserve the native WISE resolution and typically incorporate ~3× more input frames than those of the AllWISE Atlas stacks. Our coadds are designed to enable deep forced photometry, in particular for the Dark Energy Camera Legacy Survey (DECaLS) and Mayall z-Band Legacymore » Survey (MzLS), both of which are being used to select targets for the Dark Energy Spectroscopic Instrument. We describe newly introduced processing steps aimed at leveraging added redundancy to remove artifacts, with the intent of facilitating uniform target selection and searches for rare/exotic objects (e.g., high-redshift quasars and distant galaxy clusters). Forced photometry depths achieved with these coadds extend 0.56 (0.46) magnitudes deeper in W1 (W2) than is possible with only pre-hibernation WISE imaging.« less

Deep Full-sky Coadds from Three Years of WISE and NEOWISE Observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meisner, A. M.; Lang, D.; Schlegel, D. J., E-mail: ameisner@lbl.gov

We have reprocessed over 100 terabytes of single-exposure Wide-field Infrared Survey Explorer ( WISE )/NEOWISE images to create the deepest ever full-sky maps at 3–5 microns. We include all publicly available W1 and W2 imaging—a total of ∼8 million exposures in each band—from ∼37 months of observations spanning 2010 January to 2015 December. Our coadds preserve the native WISE resolution and typically incorporate ∼3× more input frames than those of the AllWISE Atlas stacks. Our coadds are designed to enable deep forced photometry, in particular for the Dark Energy Camera Legacy Survey (DECaLS) and Mayall z-Band Legacy Survey (MzLS), bothmore » of which are being used to select targets for the Dark Energy Spectroscopic Instrument. We describe newly introduced processing steps aimed at leveraging added redundancy to remove artifacts, with the intent of facilitating uniform target selection and searches for rare/exotic objects (e.g., high-redshift quasars and distant galaxy clusters). Forced photometry depths achieved with these coadds extend 0.56 (0.46) magnitudes deeper in W1 (W2) than is possible with only pre-hibernation WISE imaging.« less

Deep Full-sky Coadds from Three Years of WISE and NEOWISE Observations

NASA Astrophysics Data System (ADS)

Meisner, A. M.; Lang, D.; Schlegel, D. J.

2017-10-01

We have reprocessed over 100 terabytes of single-exposure Wide-field Infrared Survey Explorer (WISE)/NEOWISE images to create the deepest ever full-sky maps at 3-5 microns. We include all publicly available W1 and W2 imaging—a total of ˜8 million exposures in each band—from ˜37 months of observations spanning 2010 January to 2015 December. Our coadds preserve the native WISE resolution and typically incorporate ˜3× more input frames than those of the AllWISE Atlas stacks. Our coadds are designed to enable deep forced photometry, in particular for the Dark Energy Camera Legacy Survey (DECaLS) and Mayall z-Band Legacy Survey (MzLS), both of which are being used to select targets for the Dark Energy Spectroscopic Instrument. We describe newly introduced processing steps aimed at leveraging added redundancy to remove artifacts, with the intent of facilitating uniform target selection and searches for rare/exotic objects (e.g., high-redshift quasars and distant galaxy clusters). Forced photometry depths achieved with these coadds extend 0.56 (0.46) magnitudes deeper in W1 (W2) than is possible with only pre-hibernation WISE imaging.

Deep Full-sky Coadds from Three Years of WISE and NEOWISE Observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meisner, A. M.; Lang, D.; Schlegel, D. J.

Here, we have reprocessed over 100 terabytes of single-exposure Wide-field Infrared Survey Explorer (WISE)/NEOWISE images to create the deepest ever full-sky maps at 3-5 microns. We include all publicly available W1 and W2 imaging - a total of ~8 million exposures in each band - from ~37 months of observations spanning 2010 January to 2015 December. Our coadds preserve the native WISE resolution and typically incorporate ~3× more input frames than those of the AllWISE Atlas stacks. Our coadds are designed to enable deep forced photometry, in particular for the Dark Energy Camera Legacy Survey (DECaLS) and Mayall z-Band Legacymore » Survey (MzLS), both of which are being used to select targets for the Dark Energy Spectroscopic Instrument. We describe newly introduced processing steps aimed at leveraging added redundancy to remove artifacts, with the intent of facilitating uniform target selection and searches for rare/exotic objects (e.g., high-redshift quasars and distant galaxy clusters). Forced photometry depths achieved with these coadds extend 0.56 (0.46) magnitudes deeper in W1 (W2) than is possible with only pre-hibernation WISE imaging.« less

KSC-05pd2625

NASA Image and Video Library

2005-12-15

KENNEDY SPACE CENTER, FLA. - The mission decal for New Horizons is laid out in strips on the floor of the Payload Hazardous Servicing Facility before installation onto the spacecraft's fairing. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

In-plane structuring of proton exchange membrane fuel cell cathodes: Effect of ionomer equivalent weight structuring on performance and current density distribution

NASA Astrophysics Data System (ADS)

Herden, Susanne; Riewald, Felix; Hirschfeld, Julian A.; Perchthaler, Markus

2017-07-01

Within the active area of a fuel cell inhomogeneous operating conditions occur, however, state of the art electrodes are homogenous over the complete active area. This study uses current density distribution measurements to analyze which ionomer equivalent weight (EW) shows locally the highest current densities. With this information a segmented cathode electrode is manufactured by decal transfer. The segmented electrode shows better performance especially at high current densities compared to homogenous electrodes. Furthermore this segmented catalyst coated membrane (CCM) performs optimal in wet as well as dry conditions, both operating conditions arise in automotive fuel cell applications. Thus, cathode electrodes with an optimized ionomer EW distribution might have a significant impact on future automotive fuel cell development.

Certified safe farm: identifying and removing hazards on the farm.

PubMed

Rautiainen, R H; Grafft, L J; Kline, A K; Madsen, M D; Lange, J L; Donham, K J

2010-04-01

This article describes the development of the Certified Safe Farm (CSF) on-farm safety review tools, characterizes the safety improvements among participating farms during the study period, and evaluates differences in background variables between low and high scoring farms. Average farm review scores on 185 study farms improved from 82 to 96 during the five-year study (0-100 scale, 85 required for CSF certification). A total of 1292 safety improvements were reported at an estimated cost of $650 per farm. A wide range of improvements were made, including adding 9 rollover protective structures (ROPS), 59 power take-off (PTO) master shields, and 207 slow-moving vehicle (SMV) emblems; improving lighting on 72 machines: placing 171 warning decals on machinery; shielding 77 moving parts; locking up 17 chemical storage areas, adding 83 lockout/tagout improvements; and making general housekeeping upgrades in 62 farm buildings. The local, trained farm reviewers and the CSF review process overall were well received by participating farmers. In addition to our earlier findings where higher farm review scores were associated with lower self-reported health outcome costs, we found that those with higher farm work hours, younger age, pork production in confinement, beef production, poultry production, and reported exposure to agrichemicals had higher farm review scores than those who did not have these characteristics. Overall, the farm review process functioned as expected. encouraging physical improvements in the farm environment, and contributing to the multi-faceted CSF intervention program.

Analyzing the influence of high electrode potentials on intrinsic properties of catalyst coated membranes using impedance spectroscopy

NASA Astrophysics Data System (ADS)

Alink, Robert; Schüßler, Martina; Pospischil, Maximilian; Erath, Denis; Gerteisen, Dietmar

2016-09-01

Catalyst layers (CLs) with varying ionomer contents are produced using a stencil coating and screen printing technique. The optimum ionomer content of 31-34 wt% confirms the findings of other groups and performance is found to be independent of production technique. A new CL impedance transition line model is developed and fitted to in-situ data. The results indicate that the protonic contact resistance between CL and membrane is an important factor for the used transfer-decal process, especially for CLs with low ionomer loading. When subjected to potentials higher than 1.2 V, an increased performance is observed for low ionomer loading CLs. It is found that by applying the high potential to the electrode a significantly increased proton conductivity is counteracting and superimposing the loss of electrochemical surface area (ECSA) due to carbon corrosion. After aging, the performance of the 15 wt% CL is at the same level as the 31-34 wt% ionomer content CLs at the beginning of life, even though the ECSA is reduced due to carbon corrosion or platinum dissolution. The findings indicate that for the optimization of the ionomer loading, either the changing wetting properties or the redistribution of ionomer during lifetime have to be taken into account.

KSC-05pd2628

NASA Image and Video Library

2005-12-15

KENNEDY SPACE CENTER, FLA. - Technicians install strips of the New Horizons mission decal on the spacecraft fairing in the Payload Hazardous Servicing Facility. The last strip will be installed on the fairing after the spacecraft is delivered to Pad 41 on Dec. 17. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

KSC-05pd2629

NASA Image and Video Library

2005-12-15

KENNEDY SPACE CENTER, FLA. - Technicians install strips of the New Horizons mission decal on the spacecraft fairing in the Payload Hazardous Servicing Facility. The last strip will be installed on the fairing after the spacecraft is delivered to Pad 41 on Dec. 17. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

KSC-05pd2627

NASA Image and Video Library

2005-12-15

KENNEDY SPACE CENTER, FLA. - Technicians install strips of the New Horizons mission decal on the spacecraft fairing in the Payload Hazardous Servicing Facility. The last strip will be installed on the fairing after the spacecraft is delivered to Pad 41 on Dec. 17. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

KSC-05pd2631

NASA Image and Video Library

2005-12-16

KENNEDY SPACE CENTER, FLA. - In the Payload Hazardous Servicing Facility, technicians lift New Horizons toward a transporter for its move to Complex 41 on Cape Canaveral Air Force Station. The last strip of the mission decal will be installed on the fairing after the spacecraft is delivered to the pad. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

KSC-05pd2632

NASA Image and Video Library

2005-12-16

KENNEDY SPACE CENTER, FLA. - In the Payload Hazardous Servicing Facility, technicians lower New Horizons onto a transporter for its move to Complex 41 on Cape Canaveral Air Force Station. The last strip of the mission decal will be installed on the fairing after the spacecraft is delivered to the pad. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

KSC-05pd2626

NASA Image and Video Library

2005-12-15

KENNEDY SPACE CENTER, FLA. - A technician installs the first strip of the New Horizons mission decal on the spacecraft fairing in the Payload Hazardous Servicing Facility. The last strip will be installed on the fairing after the spacecraft is delivered to Pad 41 on Dec. 17. New Horizons carries seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015.

Rambutan-like CNT-Al2O3 scaffolds for high-performance cathode catalyst layers of polymer electrolyte fuel cells

NASA Astrophysics Data System (ADS)

Chang, KwangHyun; Cho, Seonghun; Lim, Eun Ja; Park, Seok-Hee; Yim, Sung-Dae

2018-03-01

Rambutan-like CNT-Al2O3 scaffolds are introduced as a potential candidate for CNT-based catalyst supports to overcome the CNT issues, such as the easy bundling in catalyst ink and the poor pore structure of the CNT-based catalyst layers, and to achieve high MEA performance in PEFCs. Non-porous α-phase Al2O3 balls are introduced to enable the growth of multiwalled CNTs, and Pt nanoparticles are loaded onto the CNT surfaces. In a half-cell, the Pt/CNT-Al2O3 catalyst shows much higher durability than those of a commercial Pt/C catalyst even though it shows lower oxygen reduction reaction (ORR) activity than Pt/C. After using the decal process for MEA formation, the Pt/CNT-Al2O3 shows comparable initial performance characteristics to Pt/C, overcoming the lower ORR activity, mainly due to the facile oxygen transport in the cathode catalyst layers fabricated with the CNT-Al2O3 scaffolds. The Pt/CNT-Al2O3 also exhibits much higher durability against carbon corrosion than Pt/C owing to the durable characteristics of CNTs. Systematic analysis of single cell performance for both initial and after degradation is provided to understand the origin of the high initial performance and durable behavior of Pt/CNT-Al2O3-based catalyst layers. This will provide insights into the design of electrocatalysts for high-performance MEAs in PEFCs.

STS-31 MS Sullivan and Pilot Bolden monitor SE 82-16 Ion Arc on OV-103 middeck

NASA Technical Reports Server (NTRS)

1990-01-01

STS-31 Mission Specialist (MS) Kathryn D. Sullivan monitors and advises ground controllers of the activity inside the Student Experiment (SE) 82-16, Ion arc - studies of the effects of microgravity and a magnetic field on an electric arc, mounted in front of the middeck lockers aboard Discovery, Orbiter Vehicle (OV) 103. Pilot Charles F. Bolden uses a video camera and an ARRIFLEX motion picture camera to record the activity inside the special chamber. A sign in front of the experiment reads 'SSIP 82-16 Greg's Experiment Happy Graduation from STS-31.' SSIP stands for Shuttle Student Involvement Program. Gregory S. Peterson who developed the experiment (Greg's Experiment) is a student at Utah State University and monitored the experiment's operation from JSC's Mission Control Center (MCC) during the flight. Decals displayed in the background on the orbiter galley represent the Hubble Space Telescope (HST), the United States (U.S.) Naval Reserve, Navy Oceanographers, U.S. Navy, and Univer

KSC-04pd1237

NASA Image and Video Library

2004-05-27

KENNEDY SPACE CENTER, FLA. -- EOS Aura: The Aura mission will study air quality, climate and stratospheric ozone depletion. Aura is the third of NASA’s major Earth Observing System (EOS) orbital platforms and has four instruments. The Microwave Limb Sounder (MLS) and the High Resolution Dynamics Limb Sounder (HIRDLS) will make complementary measurements of stratospheric ozone and the chemicals that destroy it. HIRDELS and MLS will also measure upper tropospheric water vapor and ozone - key gases that regulate climate. The Aura payload also includes the Tropospheric Emission Spectrometer (TES), which will make the first global measurements of lower atmospheric ozone, and the Ozone Monitoring Instrument (OMI), which will measure the total amount of atmospheric ozone as well as lower atmospheric dust, smoke and other aerosols. Aura is scheduled to launch in 2004. The flags on the decals represent the countries participating in the mission: United States, United Kingdom, Netherlands and Finland. The EOS Aura mission is being managed by NASA’s Goddard Space Flight Center.

Strategies and willingness of rural restaurateurs to promote healthy foods.

PubMed

Benson, W

1995-01-01

Nutritionists need to understand the willingness of restaurateurs to prepare and sell healthy foods, as Canadians frequently eat meals at food services. The lunch trade restaurants under the jurisdiction of a rural and semi-rural Alberta health unit were surveyed by telephone. Two thirds of the restaurants were family-style and had 100 seats or fewer. Five of 20 healthy foods were rated as difficult to serve, due to: lack of customer demand; lack of food availability; and the need to maintain the quality of fresh vegetables, fruits and milk products. Many restaurateurs are willing to change internally by training staff (88%) and by trying new recipes (84%). Staff education materials perceived to be helpful by 80% of restaurateurs included video/audio tapes, information sheets and posters. Restaurateurs were most willing to use menu inserts (76%), table tents (68%) and door decals (72%) to promote healthy foods. Nutrition services should focus on how restaurants can make changes to include healthy foods through food preparation and menu items.

Data visualization methods, data visualization devices, data visualization apparatuses, and articles of manufacture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, Alan E.; Crow, Vernon L.; Payne, Deborah A.

Data visualization methods, data visualization devices, data visualization apparatuses, and articles of manufacture are described according to some aspects. In one aspect, a data visualization method includes accessing a plurality of initial documents at a first moment in time, first processing the initial documents providing processed initial documents, first identifying a plurality of first associations of the initial documents using the processed initial documents, generating a first visualization depicting the first associations, accessing a plurality of additional documents at a second moment in time after the first moment in time, second processing the additional documents providing processed additional documents, secondmore » identifying a plurality of second associations of the additional documents and at least some of the initial documents, wherein the second identifying comprises identifying using the processed initial documents and the processed additional documents, and generating a second visualization depicting the second associations.« less

Improving the Product Documentation Process of a Small Software Company

NASA Astrophysics Data System (ADS)

Valtanen, Anu; Ahonen, Jarmo J.; Savolainen, Paula

Documentation is an important part of the software process, even though it is often neglected in software companies. The eternal question is how much documentation is enough. In this article, we present a practical implementation of lightweight product documentation process resulting from SPI efforts in a small company. Small companies’ financial and human resources are often limited. The documentation process described here, offers a template for creating adequate documentation consuming minimal amount of resources. The key element of the documentation process is an open source web-based bugtracking system that was customized to be used as a documentation tool. The use of the tool enables iterative and well structured documentation. The solution best serves the needs of a small company with off-the-shelf software products and striving for SPI.

Improving the Document Development Process: Integrating Relational Data and Statistical Process Control.

ERIC Educational Resources Information Center

Miller, John

1994-01-01

Presents an approach to document numbering, document titling, and process measurement which, when used with fundamental techniques of statistical process control, reveals meaningful process-element variation as well as nominal productivity models. (SR)

An overview of selected information storage and retrieval issues in computerized document processing

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Ihebuzor, Valentine U.

1984-01-01

The rapid development of computerized information storage and retrieval techniques has introduced the possibility of extending the word processing concept to document processing. A major advantage of computerized document processing is the relief of the tedious task of manual editing and composition usually encountered by traditional publishers through the immense speed and storage capacity of computers. Furthermore, computerized document processing provides an author with centralized control, the lack of which is a handicap of the traditional publishing operation. A survey of some computerized document processing techniques is presented with emphasis on related information storage and retrieval issues. String matching algorithms are considered central to document information storage and retrieval and are also discussed.

E-documentation as a process management tool for nursing care in hospitals.

PubMed

Rajkovic, Uros; Sustersic, Olga; Rajkovic, Vladislav

2009-01-01

Appropriate documentation plays a key role in process management in nursing care. It includes holistic data management based on patient's data along the clinical path with regard to nursing care. We developed an e-documentation model that follows the process method of work in nursing care. It assesses the patient's status on the basis of Henderson's theoretical model of 14 basic living activities and is aligned with internationally recognized nursing classifications. E-documentation development requires reengineering of existing documentation and facilitates process reengineering. A prototype solution of an e-nursing documentation, already being in testing process at University medical centres in Ljubljana and Maribor, will be described.

19 CFR 201.16 - Service of process and other documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Service of process and other documents. 201.16... APPLICATION Initiation and Conduct of Investigations § 201.16 Service of process and other documents. (a) By..., the service of a process or other document of the Commission shall be served by anyone duly authorized...

19 CFR 210.7 - Service of process and other documents; publication of notices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Service of process and other documents... § 210.7 Service of process and other documents; publication of notices. (a) Manner of service. (1) The service of process and all documents issued by or on behalf of the Commission or the administrative law...

Adaptive Algorithms for Automated Processing of Document Images

DTIC Science & Technology

2011-01-01

ABSTRACT Title of dissertation: ADAPTIVE ALGORITHMS FOR AUTOMATED PROCESSING OF DOCUMENT IMAGES Mudit Agrawal, Doctor of Philosophy, 2011...2011 4. TITLE AND SUBTITLE Adaptive Algorithms for Automated Processing of Document Images 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...ALGORITHMS FOR AUTOMATED PROCESSING OF DOCUMENT IMAGES by Mudit Agrawal Dissertation submitted to the Faculty of the Graduate School of the University

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Definition and documentation of engineering processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, G.W.

1997-11-01

This tutorial is an extract of a two-day workshop developed under the auspices of the Quality Engineering Department at Sandia National Laboratories. The presentation starts with basic definitions and addresses why processes should be defined and documented. It covers three primary topics: (1) process considerations and rationale, (2) approach to defining and documenting engineering processes, and (3) an IDEFO model of the process for defining engineering processes.

TOPEX SDR Processing, October 1998. Volume 4

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.; Lockwood, Dennis W.

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Animal-eyeball vs. road-sign retroreflectors.

PubMed

Greene, Nathaniel R; Filko, Brian J

2010-01-01

The retroreflective characteristics of ex-vitro cow and deer eyeballs were compared to those of man-made materials used in road signs and bicycle-style reflectors. Reflected intensities were measured using a goniometer that consists of a green He-Ne laser as the light source, and a photomultiplier tube as the detector. It was found that the best quality road-sign reflector, made from a 200-micron-scale, close-packed array of corner cubes, is approximately six times more efficient than a cow eyeball at returning light in the direction of the incoming beam. Less expensive man-made retroreflectors, utilizing 35-micron glass beads (as in mailbox decals) or millimeter-scale arrays of corner cubes (bicycle-style reflectors) are, however, less efficient than the cow eye. The high quality of animal eyeball optics is evidenced by their extremely tight angular spread (full width half maximum congruent with 1 degrees) of retroreflected intensity about the incident path. Moreover, as the reflector itself is rotated relative to the incident beam, the eyeballs preserve their efficiency of retroreflection better than the man-made materials. Interference-diffraction patterns were observed in the retroreflected beams from the small-scale corner cubes, but were not observed in eyeball retroreflection.

Fast title extraction method for business documents

NASA Astrophysics Data System (ADS)

Katsuyama, Yutaka; Naoi, Satoshi

1997-04-01

Conventional electronic document filing systems are inconvenient because the user must specify the keywords in each document for later searches. To solve this problem, automatic keyword extraction methods using natural language processing and character recognition have been developed. However, these methods are slow, especially for japanese documents. To develop a practical electronic document filing system, we focused on the extraction of keyword areas from a document by image processing. Our fast title extraction method can automatically extract titles as keywords from business documents. All character strings are evaluated for similarity by rating points associated with title similarity. We classified these points as four items: character sitting size, position of character strings, relative position among character strings, and string attribution. Finally, the character string that has the highest rating is selected as the title area. The character recognition process is carried out on the selected area. It is fast because this process must recognize a small number of patterns in the restricted area only, and not throughout the entire document. The mean performance of this method is an accuracy of about 91 percent and a 1.8 sec. processing time for an examination of 100 Japanese business documents.

Creation of structured documentation templates using Natural Language Processing techniques.

PubMed

Kashyap, Vipul; Turchin, Alexander; Morin, Laura; Chang, Frank; Li, Qi; Hongsermeier, Tonya

2006-01-01

Structured Clinical Documentation is a fundamental component of the healthcare enterprise, linking both clinical (e.g., electronic health record, clinical decision support) and administrative functions (e.g., evaluation and management coding, billing). One of the challenges in creating good quality documentation templates has been the inability to address specialized clinical disciplines and adapt to local clinical practices. A one-size-fits-all approach leads to poor adoption and inefficiencies in the documentation process. On the other hand, the cost associated with manual generation of documentation templates is significant. Consequently there is a need for at least partial automation of the template generation process. We propose an approach and methodology for the creation of structured documentation templates for diabetes using Natural Language Processing (NLP).

Document Image Processing: Going beyond the Black-and-White Barrier. Progress, Issues and Options with Greyscale and Colour Image Processing.

ERIC Educational Resources Information Center

Hendley, Tom

1995-01-01

Discussion of digital document image processing focuses on issues and options associated with greyscale and color image processing. Topics include speed; size of original document; scanning resolution; markets for different categories of scanners, including photographic libraries, publishing, and office applications; hybrid systems; data…

1 CFR 18.4 - Form of document.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.4 Form of document. (a) A printed or... processed data are urged to consult with the Office of the Federal Register staff about possible use of the...

1 CFR 18.4 - Form of document.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.4 Form of document. (a) A printed or... processed data are urged to consult with the Office of the Federal Register staff about possible use of the...

Application of process improvement principles to increase the frequency of complete airway management documentation.

PubMed

McCarty, L Kelsey; Saddawi-Konefka, Daniel; Gargan, Lauren M; Driscoll, William D; Walsh, John L; Peterfreund, Robert A

2014-12-01

Process improvement in healthcare delivery settings can be difficult, even when there is consensus among clinicians about a clinical practice or desired outcome. Airway management is a medical intervention fundamental to the delivery of anesthesia care. Like other medical interventions, a detailed description of the management methods should be documented. Despite this expectation, airway documentation is often insufficient. The authors hypothesized that formal adoption of process improvement methods could be used to increase the rate of "complete" airway management documentation. The authors defined a set of criteria as a local practice standard of "complete" airway management documentation. The authors then employed selected process improvement methodologies over 13 months in three iterative and escalating phases to increase the percentage of records with complete documentation. The criteria were applied retrospectively to determine the baseline frequency of complete records, and prospectively to measure the impact of process improvements efforts over the three phases of implementation. Immediately before the initial intervention, a retrospective review of 23,011 general anesthesia cases over 6 months showed that 13.2% of patient records included complete documentation. At the conclusion of the 13-month improvement effort, documentation improved to a completion rate of 91.6% (P<0.0001). During the subsequent 21 months, the completion rate was sustained at an average of 90.7% (SD, 0.9%) across 82,571 general anesthetic records. Systematic application of process improvement methodologies can improve airway documentation and may be similarly effective in improving other areas of anesthesia clinical practice.

Using Inspections to Improve the Quality of Product Documentation and Code.

ERIC Educational Resources Information Center

Zuchero, John

1995-01-01

Describes how, by adapting software inspections to assess documentation and code, technical writers can collaborate with development personnel, editors, and customers to dramatically improve both the quality of documentation and the very process of inspecting that documentation. Notes that the five steps involved in the inspection process are:…

Document boundary determination using structural and lexical analysis

NASA Astrophysics Data System (ADS)

Taghva, Kazem; Cartright, Marc-Allen

2009-01-01

The document boundary determination problem is the process of identifying individual documents in a stack of papers. In this paper, we report on a classification system for automation of this process. The system employs features based on document structure and lexical content. We also report on experimental results to support the effectiveness of this system.

The evolving story of information assurance at the DoD.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Philip LaRoche

2007-01-01

This document is a review of five documents on information assurance from the Department of Defense (DoD), namely 5200.40, 8510.1-M, 8500.1, 8500.2, and an ''interim'' document on DIACAP [9]. The five documents divide into three sets: (1) 5200.40 & 8510.1-M, (2) 8500.1 & 8500.2, and (3) the interim DIACAP document. The first two sets describe the certification and accreditation process known as ''DITSCAP''; the last two sets describe the certification and accreditation process known as ''DIACAP'' (the second set applies to both processes). Each set of documents describes (1) a process, (2) a systems classification, and (3) a measurement standard.more » Appendices in this report (a) list the Phases, Activities, and Tasks of DITSCAP, (b) note the discrepancies between 5200.40 and 8510.1-M concerning DITSCAP Tasks and the System Security Authorization Agreement (SSAA), (c) analyze the DIACAP constraints on role fusion and on reporting, (d) map terms shared across the documents, and (e) review three additional documents on information assurance, namely DCID 6/3, NIST 800-37, and COBIT{reg_sign}.« less

Selecting a Clinical Intervention Documentation System for an Academic Setting

PubMed Central

Andrus, Miranda; Hester, E. Kelly; Byrd, Debbie C.

2011-01-01

Pharmacists' clinical interventions have been the subject of a substantial body of literature that focuses on the process and outcomes of establishing an intervention documentation program within the acute care setting. Few reports describe intervention documentation as a component of doctor of pharmacy (PharmD) programs; none describe the process of selecting an intervention documentation application to support the complete array of pharmacy practice and experiential sites. The process that a school of pharmacy followed to select and implement a school-wide intervention system to document the clinical and financial impact of an experiential program is described. Goals included finding a tool that allowed documentation from all experiential sites and the ability to assign dollar savings (hard and soft) to all documented interventions. The paper provides guidance for other colleges and schools of pharmacy in selecting a clinical intervention documentation system for program-wide use. PMID:21519426

Selecting a clinical intervention documentation system for an academic setting.

PubMed

Fox, Brent I; Andrus, Miranda; Hester, E Kelly; Byrd, Debbie C

2011-03-10

Pharmacists' clinical interventions have been the subject of a substantial body of literature that focuses on the process and outcomes of establishing an intervention documentation program within the acute care setting. Few reports describe intervention documentation as a component of doctor of pharmacy (PharmD) programs; none describe the process of selecting an intervention documentation application to support the complete array of pharmacy practice and experiential sites. The process that a school of pharmacy followed to select and implement a school-wide intervention system to document the clinical and financial impact of an experiential program is described. Goals included finding a tool that allowed documentation from all experiential sites and the ability to assign dollar savings (hard and soft) to all documented interventions. The paper provides guidance for other colleges and schools of pharmacy in selecting a clinical intervention documentation system for program-wide use.

Script identification from images using cluster-based templates

DOEpatents

Hochberg, J.G.; Kelly, P.M.; Thomas, T.R.

1998-12-01

A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script. 17 figs.

Script identification from images using cluster-based templates

DOEpatents

Hochberg, Judith G.; Kelly, Patrick M.; Thomas, Timothy R.

1998-01-01

A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script.

Documentation Panels Enhance Teacher Education Programs

ERIC Educational Resources Information Center

Warash, Bobbie Gibson

2005-01-01

Documentation of children's projects is advantageous to their learning process and is also a good method for student teachers to observe the process of learning. Documentation panels are a unique way to help student teachers understand how children learn. Completing a panel requires a student teacher to think through a process. Teachers must learn…

Multi-decadal trend and space-time variability of sea level over the Indian Ocean since the 1950s: impact of decadal climate modes

NASA Astrophysics Data System (ADS)

Han, W.; Stammer, D.; Meehl, G. A.; Hu, A.; Sienz, F.

2016-12-01

Sea level varies on decadal and multi-decadal timescales over the Indian Ocean. The variations are not spatially uniform, and can deviate considerably from the global mean sea level rise (SLR) due to various geophysical processes. One of these processes is the change of ocean circulation, which can be partly attributed to natural internal modes of climate variability. Over the Indian Ocean, the most influential climate modes on decadal and multi-decadal timescales are the Interdecadal Pacific Oscillation (IPO) and decadal variability of the Indian Ocean dipole (IOD). Here, we first analyze observational datasets to investigate the impacts of IPO and IOD on spatial patterns of decadal and interdecadal (hereafter decal) sea level variability & multi-decadal trend over the Indian Ocean since the 1950s, using a new statistical approach of Bayesian Dynamical Linear regression Model (DLM). The Bayesian DLM overcomes the limitation of "time-constant (static)" regression coefficients in conventional multiple linear regression model, by allowing the coefficients to vary with time and therefore measuring "time-evolving (dynamical)" relationship between climate modes and sea level. For the multi-decadal sea level trend since the 1950s, our results show that climate modes and non-climate modes (the part that cannot be explained by climate modes) have comparable contributions in magnitudes but with different spatial patterns, with each dominating different regions of the Indian Ocean. For decadal variability, climate modes are the major contributors for sea level variations over most region of the tropical Indian Ocean. The relative importance of IPO and decadal variability of IOD, however, varies spatially. For example, while IOD decadal variability dominates IPO in the eastern equatorial basin (85E-100E, 5S-5N), IPO dominates IOD in causing sea level variations in the tropical southwest Indian Ocean (45E-65E, 12S-2S). To help decipher the possible contribution of external forcing to the multi-decadal sea level trend and decadal variability, we also analyze the model outputs from NCAR's Community Earth System Model (CESM) Large Ensemble Experiments, and compare the results with our observational analyses.

Methods and apparatuses for information analysis on shared and distributed computing systems

DOEpatents

Bohn, Shawn J [Richland, WA; Krishnan, Manoj Kumar [Richland, WA; Cowley, Wendy E [Richland, WA; Nieplocha, Jarek [Richland, WA

2011-02-22

Apparatuses and computer-implemented methods for analyzing, on shared and distributed computing systems, information comprising one or more documents are disclosed according to some aspects. In one embodiment, information analysis can comprise distributing one or more distinct sets of documents among each of a plurality of processes, wherein each process performs operations on a distinct set of documents substantially in parallel with other processes. Operations by each process can further comprise computing term statistics for terms contained in each distinct set of documents, thereby generating a local set of term statistics for each distinct set of documents. Still further, operations by each process can comprise contributing the local sets of term statistics to a global set of term statistics, and participating in generating a major term set from an assigned portion of a global vocabulary.

Content-based retrieval of historical Ottoman documents stored as textual images.

PubMed

Saykol, Ediz; Sinop, Ali Kemal; Güdükbay, Ugur; Ulusoy, Ozgür; Cetin, A Enis

2004-03-01

There is an accelerating demand to access the visual content of documents stored in historical and cultural archives. Availability of electronic imaging tools and effective image processing techniques makes it feasible to process the multimedia data in large databases. In this paper, a framework for content-based retrieval of historical documents in the Ottoman Empire archives is presented. The documents are stored as textual images, which are compressed by constructing a library of symbols occurring in a document, and the symbols in the original image are then replaced with pointers into the codebook to obtain a compressed representation of the image. The features in wavelet and spatial domain based on angular and distance span of shapes are used to extract the symbols. In order to make content-based retrieval in historical archives, a query is specified as a rectangular region in an input image and the same symbol-extraction process is applied to the query region. The queries are processed on the codebook of documents and the query images are identified in the resulting documents using the pointers in textual images. The querying process does not require decompression of images. The new content-based retrieval framework is also applicable to many other document archives using different scripts.

Documentation of pain care processes does not accurately reflect pain management delivered in primary care.

PubMed

Krebs, Erin E; Bair, Matthew J; Carey, Timothy S; Weinberger, Morris

2010-03-01

Researchers and quality improvement advocates sometimes use review of chart-documented pain care processes to assess the quality of pain management. Studies have found that primary care providers frequently fail to document pain assessment and management. To assess documentation of pain care processes in an academic primary care clinic and evaluate the validity of this documentation as a measure of pain care delivered. Prospective observational study. 237 adult patients at a university-affiliated internal medicine clinic who reported any pain in the last week. Immediately after a visit, we asked patients to report the pain treatment they received. Patients completed the Brief Pain Inventory (BPI) to assess pain severity at baseline and 1 month later. We extracted documentation of pain care processes from the medical record and used kappa statistics to assess agreement between documentation and patient report of pain treatment. Using multivariable linear regression, we modeled whether documented or patient-reported pain care predicted change in pain at 1 month. Participants' mean age was 53.7 years, 66% were female, and 74% had chronic pain. Physicians documented pain assessment for 83% of visits. Patients reported receiving pain treatment more often (67%) than was documented by physicians (54%). Agreement between documentation and patient report was moderate for receiving a new pain medication (k = 0.50) and slight for receiving pain management advice (k = 0.13). In multivariable models, documentation of new pain treatment was not associated with change in pain (p = 0.134). In contrast, patient-reported receipt of new pain treatment predicted pain improvement (p = 0.005). Chart documentation underestimated pain care delivered, compared with patient report. Documented pain care processes had no relationship with pain outcomes at 1 month, but patient report of receiving care predicted clinically significant improvement. Chart review measures may not accurately reflect the pain management patients receive in primary care.

Cross-reference identification within a PDF document

NASA Astrophysics Data System (ADS)

Li, Sida; Gao, Liangcai; Tang, Zhi; Yu, Yinyan

2015-01-01

Cross-references, such like footnotes, endnotes, figure/table captions, references, are a common and useful type of page elements to further explain their corresponding entities in the target document. In this paper, we focus on cross-reference identification in a PDF document, and present a robust method as a case study of identifying footnotes and figure references. The proposed method first extracts footnotes and figure captions, and then matches them with their corresponding references within a document. A number of novel features within a PDF document, i.e., page layout, font information, lexical and linguistic features of cross-references, are utilized for the task. Clustering is adopted to handle the features that are stable in one document but varied in different kinds of documents so that the process of identification is adaptive with document types. In addition, this method leverages results from the matching process to provide feedback to the identification process and further improve the algorithm accuracy. The primary experiments in real document sets show that the proposed method is promising to identify cross-reference in a PDF document.

Using color management in color document processing

NASA Astrophysics Data System (ADS)

Nehab, Smadar

1995-04-01

Color Management Systems have been used for several years in Desktop Publishing (DTP) environments. While this development hasn't matured yet, we are already experiencing the next generation of the color imaging revolution-Device Independent Color for the small office/home office (SOHO) environment. Though there are still open technical issues with device independent color matching, they are not the focal point of this paper. This paper discusses two new and crucial aspects in using color management in color document processing: the management of color objects and their associated color rendering methods; a proposal for a precedence order and handshaking protocol among the various software components involved in color document processing. As color peripherals become affordable to the SOHO market, color management also becomes a prerequisite for common document authoring applications such as word processors. The first color management solutions were oriented towards DTP environments whose requirements were largely different. For example, DTP documents are image-centric, as opposed to SOHO documents that are text and charts centric. To achieve optimal reproduction on low-cost SOHO peripherals, it is critical that different color rendering methods are used for the different document object types. The first challenge in using color management of color document processing is the association of rendering methods with object types. As a result of an evolutionary process, color matching solutions are now available as application software, as driver embedded software and as operating system extensions. Consequently, document processing faces a new challenge, the correct selection of the color matching solution while avoiding duplicate color corrections.

The TMIS life-cycle process document, revision A

NASA Technical Reports Server (NTRS)

1991-01-01

The Technical and Management Information System (TMIS) Life-Cycle Process Document describes the processes that shall be followed in the definition, design, development, test, deployment, and operation of all TMIS products and data base applications. This document is a roll out of TMIS Standards Document (SSP 30546). The purpose of this document is to define the life cycle methodology that the developers of all products and data base applications and any subsequent modifications shall follow. Included in this methodology are descriptions of the tasks, deliverables, reviews, and approvals that are required before a product or data base application is accepted in the TMIS environment.

Documenting an ISO 9000 Quality System.

ERIC Educational Resources Information Center

Fisher, Barry

1995-01-01

Discusses six steps to follow when documenting an ISO 9000 quality system: using ISO 9000 to develop a quality system, identifying a company's business processes, analyzing the business processes; describing the procedures, writing the quality manual, and working to the documented procedures. (SR)

Dynamic reduction of dimensions of a document vector in a document search and retrieval system

DOEpatents

Jiao, Yu; Potok, Thomas E.

2011-05-03

The method and system of the invention involves processing each new document (20) coming into the system into a document vector (16), and creating a document vector with reduced dimensionality (17) for comparison with the data model (15) without recomputing the data model (15). These operations are carried out by a first computer (11) while a second computer (12) updates the data model (18), which can be comprised of an initial large group of documents (19) and is premised on the computing an initial data model (13, 14, 15) to provide a reference point for determining document vectors from documents processed from the data stream (20).

18 CFR 5.8 - Notice of commencement of proceeding and scoping document, or of approval to use traditional...

Code of Federal Regulations, 2011 CFR

2011-04-01

... of proceeding and scoping document, or of approval to use traditional licensing process or... PROCESS § 5.8 Notice of commencement of proceeding and scoping document, or of approval to use traditional... required under § 5.5, filing of the pre-application document pursuant to § 5.6, and filing of any request...

Methods, media, and systems for detecting attack on a digital processing device

DOEpatents

Stolfo, Salvatore J.; Li, Wei-Jen; Keromylis, Angelos D.; Androulaki, Elli

2014-07-22

Methods, media, and systems for detecting attack are provided. In some embodiments, the methods include: comparing at least part of a document to a static detection model; determining whether attacking code is included in the document based on the comparison of the document to the static detection model; executing at least part of the document; determining whether attacking code is included in the document based on the execution of the at least part of the document; and if attacking code is determined to be included in the document based on at least one of the comparison of the document to the static detection model and the execution of the at least part of the document, reporting the presence of an attack. In some embodiments, the methods include: selecting a data segment in at least one portion of an electronic document; determining whether the arbitrarily selected data segment can be altered without causing the electronic document to result in an error when processed by a corresponding program; in response to determining that the arbitrarily selected data segment can be altered, arbitrarily altering the data segment in the at least one portion of the electronic document to produce an altered electronic document; and determining whether the corresponding program produces an error state when the altered electronic document is processed by the corresponding program.

Methods, media, and systems for detecting attack on a digital processing device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stolfo, Salvatore J.; Li, Wei-Jen; Keromytis, Angelos D.

Methods, media, and systems for detecting attack are provided. In some embodiments, the methods include: comparing at least part of a document to a static detection model; determining whether attacking code is included in the document based on the comparison of the document to the static detection model; executing at least part of the document; determining whether attacking code is included in the document based on the execution of the at least part of the document; and if attacking code is determined to be included in the document based on at least one of the comparison of the document tomore » the static detection model and the execution of the at least part of the document, reporting the presence of an attack. In some embodiments, the methods include: selecting a data segment in at least one portion of an electronic document; determining whether the arbitrarily selected data segment can be altered without causing the electronic document to result in an error when processed by a corresponding program; in response to determining that the arbitrarily selected data segment can be altered, arbitrarily altering the data segment in the at least one portion of the electronic document to produce an altered electronic document; and determining whether the corresponding program produces an error state when the altered electronic document is processed by the corresponding program.« less

Semi-Automated Methods for Refining a Domain-Specific Terminology Base

DTIC Science & Technology

2011-02-01

only as a resource for written and oral translation, but also for Natural Language Processing ( NLP ) applications, text retrieval, document indexing...Natural Language Processing ( NLP ) applications, text retrieval, document indexing, and other knowledge management tasks. The objective of this...also for Natural Language Processing ( NLP ) applications, text retrieval (1), document indexing, and other knowledge management tasks. The National

Ensuring Cross-Cultural Equivalence in Translation of Research Consents and Clinical Documents

PubMed Central

Lee, Cheng-Chih; Li, Denise; Arai, Shoshana; Puntillo, Kathleen

2010-01-01

The aim of this article is to describe a formal process used to translate research study materials from English into traditional Chinese characters. This process may be useful for translating documents for use by both research participants and clinical patients. A modified Brislin model was used as the systematic translation process. Four bilingual translators were involved, and a Flaherty 3-point scale was used to evaluate the translated documents. The linguistic discrepancies that arise in the process of ensuring cross-cultural congruency or equivalency between the two languages are presented to promote the development of patient-accessible cross-cultural documents. PMID:18948451

The Effects of a Web-Based Nursing Process Documentation Program on Stress and Anxiety of Nursing Students in South Korea.

PubMed

Lee, Eunjoo; Noh, Hyun Kyung

2016-01-01

To examine the effects of a web-based nursing process documentation system on the stress and anxiety of nursing students during their clinical practice. A quasi-experimental design was employed. The experimental group (n = 110) used a web-based nursing process documentation program for their case reports as part of assignments for a clinical practicum, whereas the control group (n = 106) used traditional paper-based case reports. Stress and anxiety levels were measured with a numeric rating scale before, 2 weeks after, and 4 weeks after using the web-based nursing process documentation program during a clinical practicum. The data were analyzed using descriptive statistics, t tests, chi-square tests, and repeated-measures analyses of variance. Nursing students who used the web-based nursing process documentation program showed significant lower levels of stress and anxiety than the control group. A web-based nursing process documentation program could be used to reduce the stress and anxiety of nursing students during clinical practicum, which ultimately would benefit nursing students by increasing satisfaction with and effectiveness of clinical practicum. © 2015 NANDA International, Inc.

Factors affecting and affected by user acceptance of computer-based nursing documentation: results of a two-year study.

PubMed

Ammenwerth, Elske; Mansmann, Ulrich; Iller, Carola; Eichstädter, Ronald

2003-01-01

The documentation of the nursing process is an important but often neglected part of clinical documentation. Paper-based systems have been introduced to support nursing process documentation. Frequently, however, problems such as low quality of documentation are reported. It is unclear whether computer-based documentation systems can reduce these problems and which factors influence their acceptance by users. We introduced a computer-based nursing documentation system on four wards of the University Hospitals of Heidelberg and systematically evaluated its preconditions and its effects in a pretest-posttest intervention study. For the analysis of user acceptance, we concentrated on subjective data drawn from questionnaires and interviews. A questionnaire was developed using items from published questionnaires and items that had to be developed for the special purpose of this study. The quantitative results point to two factors influencing the acceptance of a new computer-based documentation system: the previous acceptance of the nursing process and the previous amount of self-confidence when using computers. On one ward, the diverse acceptance scores heavily declined after the introduction of the nursing documentation system. Explorative qualitative analysis on this ward points to further success factors of computer-based nursing documentation systems. Our results can be used to assist the planning and introduction of computer-based nursing documentation systems. They demonstrate the importance of computer experience and acceptance of the nursing process on a ward but also point to other factors such as the fit between nursing workflow and the functionality of a nursing documentation system.

Applying language technology to nursing documents: pros and cons with a focus on ethics.

PubMed

Suominen, Hanna; Lehtikunnas, Tuija; Back, Barbro; Karsten, Helena; Salakoski, Tapio; Salanterä, Sanna

2007-10-01

The present study discusses ethics in building and using applications based on natural language processing in electronic nursing documentation. Specifically, we first focus on the question of how patient confidentiality can be ensured in developing language technology for the nursing documentation domain. Then, we identify and theoretically analyze the ethical outcomes which arise when using natural language processing to support clinical judgement and decision-making. In total, we put forward and justify 10 claims related to ethics in applying language technology to nursing documents. A review of recent scientific articles related to ethics in electronic patient records or in the utilization of large databases was conducted. Then, the results were compared with ethical guidelines for nurses and the Finnish legislation covering health care and processing of personal data. Finally, the practical experiences of the authors in applying the methods of natural language processing to nursing documents were appended. Patient records supplemented with natural language processing capabilities may help nurses give better, more efficient and more individualized care for their patients. In addition, language technology may facilitate patients' possibility to receive truthful information about their health and improve the nature of narratives. Because of these benefits, research about the use of language technology in narratives should be encouraged. In contrast, privacy-sensitive health care documentation brings specific ethical concerns and difficulties to the natural language processing of nursing documents. Therefore, when developing natural language processing tools, patient confidentiality must be ensured. While using the tools, health care personnel should always be responsible for the clinical judgement and decision-making. One should also consider that the use of language technology in nursing narratives may threaten patients' rights by using documentation collected for other purposes. Applying language technology to nursing documents may, on the one hand, contribute to the quality of care, but, on the other hand, threaten patient confidentiality. As an overall conclusion, natural language processing of nursing documents holds the promise of great benefits if the potential risks are taken into consideration.

U-10Mo Baseline Fuel Fabrication Process Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.

This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less

IDC Re-Engineering Phase 2 System Specification Document Version 1.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satpathi, Meara Allena; Burns, John F.; Harris, James M.

This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Re-Engineering Phase 2 project. This System Specification Document (SSD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide data but does include requirements for the dissemination of radionuclide datamore » and products.« less

33 CFR Appendix A to Part 230 - Processing Corps NEPA Documents

Code of Federal Regulations, 2010 CFR

2010-07-01

... Corps NEPA Documents NEFA documents for Civil Works activities other than permits will be processed in... Preconstruction Engineering, and Design, Construction, and Completed Projects in an Operations and Maintenance... reconnaissance phase, the district commander should undertake environmental studies along with engineering...

Cluster mislocation in kinematic Sunyaev-Zel'dovich (kSZ) effect extraction

NASA Astrophysics Data System (ADS)

Calafut, Victoria Rose; Bean, Rachel; Yu, Byeonghee

2018-01-01

We investigate the impact of a variety of analysis assumptions that influence cluster identification and location on the kSZ pairwise momentum signal and covariance estimation. Photometric and spectroscopic galaxy tracers from SDSS, WISE, and DECaLs, spanning redshifts 0.05

Mechanical Behavior of Free-Standing Fuel Cell Electrodes on Water Surface.

PubMed

Kim, Sanwi; Kim, Jae-Han; Oh, Jong-Gil; Jang, Kyung-Lim; Jeong, Byeong-Heon; Hong, Bo Ki; Kim, Taek-Soo

2016-06-22

Fundamental understanding of the mechanical behavior of polymer electrolyte fuel cell electrodes as free-standing materials is essential to develop mechanically robust fuel cells. However, this has been a significant challenge due to critical difficulties, such as separating the pristine electrode from the substrate without damage and precisely measuring the mechanical properties of the very fragile and thin electrodes. We report the mechanical behavior of free-standing fuel cell electrodes on the water surface through adopting an innovative ice-assisted separation method to separate the electrode from decal transfer film. It is found that doubling the ionomer content in electrodes increases not only the tensile stress at the break and the Young's modulus (E) of the electrodes by approximately 2.1-3.5 and 1.7-2.4 times, respectively, but also the elongation at the break by approximately 1.5-1.7 times, which indicates that stronger, stiffer, and tougher electrodes are attained with increasing ionomer content, which have been of significant interest in materials research fields. The scaling law relationship between Young's modulus and density (ρ) has been unveiled as E ∼ ρ(1.6), and it is compared with other materials. These findings can be used to develop mechanically robust electrodes for fuel cell applications.

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 2: Framework process description

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paula S.; Crump, John W.; Ackley, Keith A.

1992-01-01

In the second volume of the Demonstration Framework Document, the graphical representation of the demonstration framework is given. This second document was created to facilitate the reading and comprehension of the demonstration framework. It is designed to be viewed in parallel with Section 4.2 of the first volume to help give a picture of the relationships between the UOB's (Unit of Behavior) of the model. The model is quite large and the design team felt that this form of presentation would make it easier for the reader to get a feel for the processes described in this document. The IDEF3 (Process Description Capture Method) diagrams of the processes of an Information System Development are presented. Volume 1 describes the processes and the agents involved with each process, while this volume graphically shows the precedence relationships among the processes.

Risk Quantification of Systems Engineering Documents Improves Probability of DOD Project Success

DTIC Science & Technology

2009-09-01

comprehensive risk model for DoD milestone review documentation as well as recommended changes to the Capability Maturity Model Integration ( CMMI ) Project...Milestone Documentation, Project Planning, Rational Frame, Political Frame, CMMI Project Planning Process Area, CMMI Risk Management Process Area...well as recommended changes to the Capability Maturity Model Integration ( CMMI ) Project Planning and Risk Management process areas. The intent is to

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

GLASSCOCK, J.A.

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

Information system life-cycle and documentation standards, volume 1

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

The Software Management and Assurance Program (SMAP) Information System Life-Cycle and Documentation Standards Document describes the Version 4 standard information system life-cycle in terms of processes, products, and reviews. The description of the products includes detailed documentation standards. The standards in this document set can be applied to the life-cycle, i.e., to each phase in the system's development, and to the documentation of all NASA information systems. This provides consistency across the agency as well as visibility into the completeness of the information recorded. An information system is software-intensive, but consists of any combination of software, hardware, and operational procedures required to process, store, or transmit data. This document defines a standard life-cycle model and content for associated documentation.

Promoting evidence informed policy making in Nigeria: a review of the maternal, newborn and child health policy development process

PubMed Central

Uneke, Chigozie Jesse; Sombie, Issiaka; Keita, Namoudou; Lokossou, Virgil; Johnson, Ermel; Ongolo-Zogo, Pierre; Uro-Chukwu, Henry Chukwuemeka

2017-01-01

Background: There is increasing recognition worldwide that health policymaking process should be informed by best available evidence. The purpose of this study was to review the policy documents on maternal, newborn and child health (MNCH) in Nigeria to assess the extent evidence informed policymaking mechanism was employed in the policy formulation process. Methods: A comprehensive literature search of websites of the Federal Ministry of Health(FMOH) Nigeria and other related ministries and agencies for relevant health policy documents related to MNCH from year 2000 to 2015 was undertaken. The following terms were used interchangeably for the literature search: maternal, child, newborn, health, policy, strategy,framework, guidelines, Nigeria. Results: Of the 108 policy documents found, 19 (17.6%) of them fulfilled the study inclusion criteria. The policy documents focused on the major aspects of maternal health improvements in Nigeria such as reproductive health, anti-malaria treatment, development of adolescent and young people health, mid wives service scheme, prevention of mother to child transmission of HIV and family planning. All the policy documents indicated that a consultative process of collection of input involving multiple stakeholders was employed, but there was no rigorous scientific process of assessing, adapting, synthesizing and application of scientific evidence reported in the policy development process. Conclusion: It is recommended that future health policy development process on MNCH should follow evidence informed policy making process and clearly document the process of incorporating evidence in the policy development. PMID:29085794

49 CFR 1104.2 - Document specifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to facilitate automated processing in document sheet feeders, original documents of more than one... textual submissions. Use of color in filings is limited to images such as graphs, maps and photographs. To facilitate automated processing of color pages, color pages may not be inserted among pages containing text...

49 CFR 1104.2 - Document specifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to facilitate automated processing in document sheet feeders, original documents of more than one... textual submissions. Use of color in filings is limited to images such as graphs, maps and photographs. To facilitate automated processing of color pages, color pages may not be inserted among pages containing text...

49 CFR 1104.2 - Document specifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to facilitate automated processing in document sheet feeders, original documents of more than one... textual submissions. Use of color in filings is limited to images such as graphs, maps and photographs. To facilitate automated processing of color pages, color pages may not be inserted among pages containing text...

49 CFR 1104.2 - Document specifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to facilitate automated processing in document sheet feeders, original documents of more than one... textual submissions. Use of color in filings is limited to images such as graphs, maps and photographs. To facilitate automated processing of color pages, color pages may not be inserted among pages containing text...

49 CFR 1104.2 - Document specifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to facilitate automated processing in document sheet feeders, original documents of more than one... textual submissions. Use of color in filings is limited to images such as graphs, maps and photographs. To facilitate automated processing of color pages, color pages may not be inserted among pages containing text...

Gaia DR2 documentation Chapter 8: Astrophysical Parameters

NASA Astrophysics Data System (ADS)

Manteiga, M.; Andrae, R.; Fouesneau, M.; Creevey, O.; Ordenovic, C.; Mary, N.; Jean-Antoine-Piccolo, A.; Bailer-Jones, C. A. L.

2018-04-01

This chapter of the Gaia DR2 documentation describes Apsis, the Astrophysical Parameters Inference System used for processing Gaia DR2 data. Beyond this documentation, a complete description of the processing and the results, as well as additional validations, have been published in Andrae et al. (2018).

Documenting the Engineering Design Process

ERIC Educational Resources Information Center

Hollers, Brent

2017-01-01

Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

1 CFR 18.1 - Original and copies required.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Original and copies required. 18.1 Section 18.1... PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.1 Original and copies... two duplicate originals or certified copies. 1 However, if the document is printed or processed on...

1 CFR 18.1 - Original and copies required.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Original and copies required. 18.1 Section 18.1... PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.1 Original and copies... two duplicate originals or certified copies. 1 However, if the document is printed or processed on...

1 CFR 18.1 - Original and copies required.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Original and copies required. 18.1 Section 18.1... PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.1 Original and copies... two duplicate originals or certified copies. 1 However, if the document is printed or processed on...

Representing Information in Patient Reports Using Natural Language Processing and the Extensible Markup Language

PubMed Central

Friedman, Carol; Hripcsak, George; Shagina, Lyuda; Liu, Hongfang

1999-01-01

Objective: To design a document model that provides reliable and efficient access to clinical information in patient reports for a broad range of clinical applications, and to implement an automated method using natural language processing that maps textual reports to a form consistent with the model. Methods: A document model that encodes structured clinical information in patient reports while retaining the original contents was designed using the extensible markup language (XML), and a document type definition (DTD) was created. An existing natural language processor (NLP) was modified to generate output consistent with the model. Two hundred reports were processed using the modified NLP system, and the XML output that was generated was validated using an XML validating parser. Results: The modified NLP system successfully processed all 200 reports. The output of one report was invalid, and 199 reports were valid XML forms consistent with the DTD. Conclusions: Natural language processing can be used to automatically create an enriched document that contains a structured component whose elements are linked to portions of the original textual report. This integrated document model provides a representation where documents containing specific information can be accurately and efficiently retrieved by querying the structured components. If manual review of the documents is desired, the salient information in the original reports can also be identified and highlighted. Using an XML model of tagging provides an additional benefit in that software tools that manipulate XML documents are readily available. PMID:9925230

Optimizing the electronic health record to standardize administration and documentation of nutritional supplements

PubMed Central

Citty, Sandra W.; Kamel, Amir; Garvan, Cynthia; Marlowe, Lee; Westhoff, Lynn

2017-01-01

Malnutrition in hospitalized patients is a major cause for hospital re-admission, pressure ulcers and increased hospital costs. Methods to improve the administration and documentation of nutritional supplements for hospitalized patients are needed to improve patient care, outcomes and resource utilization. Staff at a medium-sized academic health science center hospital in the southeastern United States noted that nutritional supplements ordered for patients at high risk for malnutrition were not offered or administered to patients in a standardized manner and/or not documented clearly in the electronic health record as per prescription. This paper reports on a process improvement project that redesigned the ordering, administration and documentation process of oral nutritional supplements in the electronic health record. By adding nutritional products to the medication order sets and adding an electronic nutrition administration record (ENAR) tab, the multidisciplinary team sought to standardize nutritional supplement ordering, documentation and administration at prescribed intervals. This process improvement project used a triangulated approach to evaluating pre- and post-process change including: medical record reviews, patient interviews, and nutrition formula room log reports. Staff education and training was carried out prior to initiation of the system changes. This process change resulted in an average decrease in the return of unused nutritional formula from 76% returned at baseline to 54% post-process change. The process change resulted in 100% of nutritional supplement orders having documentation about nutritional medication administration and/or reason for non-administration. Documentation in the ENAR showed that 41% of ONS orders were given and 59% were not given. Significantly more patients reported being offered the ONS product (p=0.0001) after process redesign and more patients (5% before ENAR and 86% after ENAR reported being offered the correct type, amount and frequency of nutritional products (p=0.0001). ENAR represented an effective strategy to improve administration and documentation of nutritional supplements for hospitalized patients. PMID:28243439

Optimizing the electronic health record to standardize administration and documentation of nutritional supplements.

PubMed

Citty, Sandra W; Kamel, Amir; Garvan, Cynthia; Marlowe, Lee; Westhoff, Lynn

2017-01-01

Malnutrition in hospitalized patients is a major cause for hospital re-admission, pressure ulcers and increased hospital costs. Methods to improve the administration and documentation of nutritional supplements for hospitalized patients are needed to improve patient care, outcomes and resource utilization. Staff at a medium-sized academic health science center hospital in the southeastern United States noted that nutritional supplements ordered for patients at high risk for malnutrition were not offered or administered to patients in a standardized manner and/or not documented clearly in the electronic health record as per prescription. This paper reports on a process improvement project that redesigned the ordering, administration and documentation process of oral nutritional supplements in the electronic health record. By adding nutritional products to the medication order sets and adding an electronic nutrition administration record (ENAR) tab, the multidisciplinary team sought to standardize nutritional supplement ordering, documentation and administration at prescribed intervals. This process improvement project used a triangulated approach to evaluating pre- and post-process change including: medical record reviews, patient interviews, and nutrition formula room log reports. Staff education and training was carried out prior to initiation of the system changes. This process change resulted in an average decrease in the return of unused nutritional formula from 76% returned at baseline to 54% post-process change. The process change resulted in 100% of nutritional supplement orders having documentation about nutritional medication administration and/or reason for non-administration. Documentation in the ENAR showed that 41% of ONS orders were given and 59% were not given. Significantly more patients reported being offered the ONS product (p=0.0001) after process redesign and more patients (5% before ENAR and 86% after ENAR reported being offered the correct type, amount and frequency of nutritional products (p=0.0001). ENAR represented an effective strategy to improve administration and documentation of nutritional supplements for hospitalized patients.

An automatically updateable web publishing solution: taking document sharing and conversion to enterprise level

NASA Astrophysics Data System (ADS)

Rahman, Fuad; Tarnikova, Yuliya; Hartono, Rachmat; Alam, Hassan

2006-01-01

This paper presents a novel automatic web publishing solution, Pageview (R). PageView (R) is a complete working solution for document processing and management. The principal aim of this tool is to allow workgroups to share, access and publish documents on-line on a regular basis. For example, assuming that a person is working on some documents. The user will, in some fashion, organize his work either in his own local directory or in a shared network drive. Now extend that concept to a workgroup. Within a workgroup, some users are working together on some documents, and they are saving them in a directory structure somewhere on a document repository. The next stage of this reasoning is that a workgroup is working on some documents, and they want to publish them routinely on-line. Now it may happen that they are using different editing tools, different software, and different graphics tools. The resultant documents may be in PDF, Microsoft Office (R), HTML, or Word Perfect format, just to name a few. In general, this process needs the documents to be processed in a fashion so that they are in the HTML format, and then a web designer needs to work on that collection to make them available on-line. PageView (R) takes care of this whole process automatically, making the document workflow clean and easy to follow. PageView (R) Server publishes documents, complete with the directory structure, for online use. The documents are automatically converted to HTML and PDF so that users can view the content without downloading the original files, or having to download browser plug-ins. Once published, other users can access the documents as if they are accessing them from their local folders. The paper will describe the complete working system and will discuss possible applications within the document management research.

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

Document segmentation for high-quality printing

NASA Astrophysics Data System (ADS)

Ancin, Hakan

1997-04-01

A technique to segment dark texts on light background of mixed mode color documents is presented. This process does not perceptually change graphics and photo regions. Color documents are scanned and printed from various media which usually do not have clean background. This is especially the case for the printouts generated from thin magazine samples, these printouts usually include text and figures form the back of the page, which is called bleeding. Removal of bleeding artifacts improves the perceptual quality of the printed document and reduces the color ink usage. By detecting the light background of the document, these artifacts are removed from background regions. Also detection of dark text regions enables the halftoning algorithms to use true black ink for the black text pixels instead of composite black. The processed document contains sharp black text on white background, resulting improved perceptual quality and better ink utilization. The described method is memory efficient and requires a small number of scan lines of high resolution color documents during processing.

Software for Better Documentation of Other Software

NASA Technical Reports Server (NTRS)

Pinedo, John

2003-01-01

The Literate Programming Extraction Engine is a Practical Extraction and Reporting Language- (PERL-)based computer program that facilitates and simplifies the implementation of a concept of self-documented literate programming in a fashion tailored to the typical needs of scientists. The advantage for the programmer is that documentation and source code are written side-by-side in the same file, reducing the likelihood that the documentation will be inconsistent with the code and improving the verification that the code performs its intended functions. The advantage for the user is the knowledge that the documentation matches the software because they come from the same file. This program unifies the documentation process for a variety of programming languages, including C, C++, and several versions of FORTRAN. This program can process the documentation in any markup language, and incorporates the LaTeX typesetting software. The program includes sample Makefile scripts for automating both the code-compilation (when appropriate) and documentation-generation processes into a single command-line statement. Also included are macro instructions for the Emacs display-editor software, making it easy for a programmer to toggle between editing in a code or a documentation mode.

Intelligent Document Gateway: A Service System Case Study and Analysis

NASA Astrophysics Data System (ADS)

Krishna, Vikas; Lelescu, Ana

In today's fast paced world, it is necessary to process business ­documents expediently, accurately, and diligently. In other words, processing has to be fast, errors must be prevented (or caught and corrected quickly), and documents cannot be lost or misplaced. The failure to meet these criteria, depending on the type and purpose of the documents, can have serious business, legal, or safety consequences. In this paper, we evaluated a B2B order placement service system that allows clients to place orders for products and services over a network. We describe the order placement service before and after deploying the Intelligent Document Gateway (IDG), a document-centric business process automation technology from IBM Research. Using service science perspective and service systems frameworks, we provide an analysis of how IDG improved the value proposition for both the service providers and service clients.

18 CFR 5.25 - Applications requiring a draft NEPA document.

Code of Federal Regulations, 2012 CFR

2012-04-01

... a draft NEPA document. 5.25 Section 5.25 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.25 Applications requiring a draft NEPA document. (a) If the Commission determines that a license application will be processed with an environmental impact statement, or a draft and final...

18 CFR 5.25 - Applications requiring a draft NEPA document.

Code of Federal Regulations, 2013 CFR

2013-04-01

... a draft NEPA document. 5.25 Section 5.25 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.25 Applications requiring a draft NEPA document. (a) If the Commission determines that a license application will be processed with an environmental impact statement, or a draft and final...

18 CFR 5.25 - Applications requiring a draft NEPA document.

Code of Federal Regulations, 2014 CFR

2014-04-01

... a draft NEPA document. 5.25 Section 5.25 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.25 Applications requiring a draft NEPA document. (a) If the Commission determines that a license application will be processed with an environmental impact statement, or a draft and final...

Cognitive Process as a Basis for Intelligent Retrieval Systems Design.

ERIC Educational Resources Information Center

Chen, Hsinchun; Dhar, Vasant

1991-01-01

Two studies of the cognitive processes involved in online document-based information retrieval were conducted. These studies led to the development of five computational models of online document retrieval which were incorporated into the design of an "intelligent" document-based retrieval system. Both the system and the broader implications of…

75 FR 35510 - License Renewal Interim Staff Guidance Process, Revision 2 Notice of Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-22

... Related Regulatory Functions.'' An electronic copy of the revised LR-ISG process is available in the NRC's Agencywide Documents Access and Management System (ADAMS) under Accession No. ML100920158. The revised LR-ISG... interim changes to certain NRC license renewal guidance documents. These guidance documents facilitate the...

Comparing Latent Dirichlet Allocation and Latent Semantic Analysis as Classifiers

ERIC Educational Resources Information Center

Anaya, Leticia H.

2011-01-01

In the Information Age, a proliferation of unstructured text electronic documents exists. Processing these documents by humans is a daunting task as humans have limited cognitive abilities for processing large volumes of documents that can often be extremely lengthy. To address this problem, text data computer algorithms are being developed.…

Three-dimensional measurement system for crime scene documentation

NASA Astrophysics Data System (ADS)

Adamczyk, Marcin; Hołowko, Elwira; Lech, Krzysztof; Michoński, Jakub; MÄ czkowski, Grzegorz; Bolewicki, Paweł; Januszkiewicz, Kamil; Sitnik, Robert

2017-10-01

Three dimensional measurements (such as photogrammetry, Time of Flight, Structure from Motion or Structured Light techniques) are becoming a standard in the crime scene documentation process. The usage of 3D measurement techniques provide an opportunity to prepare more insightful investigation and helps to show every trace in the context of the entire crime scene. In this paper we would like to present a hierarchical, three-dimensional measurement system that is designed for crime scenes documentation process. Our system reflects the actual standards in crime scene documentation process - it is designed to perform measurement in two stages. First stage of documentation, the most general, is prepared with a scanner with relatively low spatial resolution but also big measuring volume - it is used for the whole scene documentation. Second stage is much more detailed: high resolution but smaller size of measuring volume for areas that required more detailed approach. The documentation process is supervised by a specialised application CrimeView3D, that is a software platform for measurements management (connecting with scanners and carrying out measurements, automatic or semi-automatic data registration in the real time) and data visualisation (3D visualisation of documented scenes). It also provides a series of useful tools for forensic technicians: virtual measuring tape, searching for sources of blood spatter, virtual walk on the crime scene and many others. In this paper we present our measuring system and the developed software. We also provide an outcome from research on metrological validation of scanners that was performed according to VDI/VDE standard. We present a CrimeView3D - a software-platform that was developed to manage the crime scene documentation process. We also present an outcome from measurement sessions that were conducted on real crime scenes with cooperation with Technicians from Central Forensic Laboratory of Police.

Document Concurrence System

NASA Technical Reports Server (NTRS)

Muhsin, Mansour; Walters, Ian

2004-01-01

The Document Concurrence System is a combination of software modules for routing users expressions of concurrence with documents. This system enables determination of the current status of concurrences and eliminates the need for the prior practice of manually delivering paper documents to all persons whose approvals were required. This system runs on a server, and participants gain access via personal computers equipped with Web-browser and electronic-mail software. A user can begin a concurrence routing process by logging onto an administration module, naming the approvers and stating the sequence for routing among them, and attaching documents. The server then sends a message to the first person on the list. Upon concurrence by the first person, the system sends a message to the second person, and so forth. A person on the list indicates approval, places the documents on hold, or indicates disapproval, via a Web-based module. When the last person on the list has concurred, a message is sent to the initiator, who can then finalize the process through the administration module. A background process running on the server identifies concurrence processes that are overdue and sends reminders to the appropriate persons.

PROCESS DOCUMENTATION: A MODEL FOR KNOWLEDGE MANAGEMENT IN ORGANIZATIONS.

PubMed

Haddadpoor, Asefeh; Taheri, Behjat; Nasri, Mehran; Heydari, Kamal; Bahrami, Gholamreza

2015-10-01

Continuous and interconnected processes are a chain of activities that turn the inputs of an organization to its outputs and help achieve partial and overall goals of the organization. These activates are carried out by two types of knowledge in the organization called explicit and implicit knowledge. Among these, implicit knowledge is the knowledge that controls a major part of the activities of an organization, controls these activities internally and will not be transferred to the process owners unless they are present during the organization's work. Therefore the goal of this study is identification of implicit knowledge and its integration with explicit knowledge in order to improve human resources management, physical resource management, information resource management, training of new employees and other activities of Isfahan University of Medical Science. The project for documentation of activities in department of health of Isfahan University of Medical Science was carried out in several stages. First the main processes and related sub processes were identified and categorized with the help of planning expert. The categorization was carried out from smaller processes to larger ones. In this stage the experts of each process wrote down all their daily activities and organized them into general categories based on logical and physical relations between different activities. Then each activity was assigned a specific code. The computer software was designed after understanding the different parts of the processes, including main and sup processes, and categorization, which will be explained in the following sections. The findings of this study showed that documentation of activities can help expose implicit knowledge because all of inputs and outputs of a process along with the length, location, tools and different stages of the process, exchanged information, storage location of the information and information flow can be identified using proper documentation. A documentation program can create a complete identifier for every process of an organization and also acts as the main tool for establishment of information technology as the basis of the organization and helps achieve the goal of having electronic and information technology based organizations. In other words documentation is the starting step in creating an organizational architecture. Afterwards, in order to reach the desired goal of documentation, computer software containing all tools, methods, instructions and guidelines and implicit knowledge of the organization was designed. This software links all relevant knowledge to the main text of the documentation and identification of a process and provides the users with electronic versions of all documentations and helps use the explicit and implicit knowledge of the organization to facilitate the reengineering of the processes in the organization.

Using formal methods for content validation of medical procedure documents.

PubMed

Cota, Érika; Ribeiro, Leila; Bezerra, Jonas Santos; Costa, Andrei; da Silva, Rosiana Estefane; Cota, Gláucia

2017-08-01

We propose the use of a formal approach to support content validation of a standard operating procedure (SOP) for a therapeutic intervention. Such an approach provides a useful tool to identify ambiguities, omissions and inconsistencies, and improves the applicability and efficacy of documents in the health settings. We apply and evaluate a methodology originally proposed for the verification of software specification documents to a specific SOP. The verification methodology uses the graph formalism to model the document. Semi-automatic analysis identifies possible problems in the model and in the original document. The verification is an iterative process that identifies possible faults in the original text that should be revised by its authors and/or specialists. The proposed method was able to identify 23 possible issues in the original document (ambiguities, omissions, redundant information, and inaccuracies, among others). The formal verification process aided the specialists to consider a wider range of usage scenarios and to identify which instructions form the kernel of the proposed SOP and which ones represent additional or required knowledge that are mandatory for the correct application of the medical document. By using the proposed verification process, a simpler and yet more complete SOP could be produced. As consequence, during the validation process the experts received a more mature document and could focus on the technical aspects of the procedure itself. Copyright © 2017 Elsevier B.V. All rights reserved.

Handwritten document age classification based on handwriting styles

NASA Astrophysics Data System (ADS)

Ramaiah, Chetan; Kumar, Gaurav; Govindaraju, Venu

2012-01-01

Handwriting styles are constantly changing over time. We approach the novel problem of estimating the approximate age of Historical Handwritten Documents using Handwriting styles. This system will have many applications in handwritten document processing engines where specialized processing techniques can be applied based on the estimated age of the document. We propose to learn a distribution over styles across centuries using Topic Models and to apply a classifier over weights learned in order to estimate the approximate age of the documents. We present a comparison of different distance metrics such as Euclidean Distance and Hellinger Distance within this application.

[Law courts and clinical documentation].

PubMed

Jiménez Carnicero, M P; Magallón, A I; Gordillo, A

2006-01-01

Background. Until 2004, requests for clinical documentation proceeding from the Judicial Administration on Specialist Care of Pamplona were received in six different centres and were processed independently, with different procedures, and documents were even sent in duplicate, with the resulting work load. This article describes the procedure for processing requests for documentation proceeding from the Law Courts and analyses the requests received. Methods. A circuit was set up to channel the judicial requests that arrived at the Specialist Health Care Centres of Pamplona and at the Juridical Regime Service of the Health System of Navarra-Osasunbidea, and a Higher Technician in Health Documentation was contracted to centralise these requests. A proceedings protocol was established to unify criteria and speed up the process, and a database was designed to register the proceedings. Results. In the course of 2004, 210 requests for documentation by legal requirement were received. Of these, 24 were claims of patrimonial responsibility and 13 were requested by lawyers with the patient's authorisation. The most frequent jurisdictional order was penal (43.33%). Ninety-three point one five percent (93.15%) of the requests proceeded from law courts in the autonomous community of Navarra. The centre that received the greatest number of requests was the "Príncipe de Viana" Consultation Centre (33.73%).The most frequently requested documentation was a copy of reports (109) and a copy of the complete clinical record (39). On two occasions the original clinical record was required. The average time of response was 6.6 days. Conclusions. The centralisation of administration has brought greater agility to the process and homogeneity in the criteria of processing. Less time is involved in preparing and dispatching the documentation, the dispatch of duplicate documents is avoided, the work load has been reduced and the dispersal of documentation is avoided, a situation that guarantees greater privacy for the patient.

Does Documenting the Regulation Process on a Blog Enhance Pre-Service Teachers' Self- and Co-Regulation in a Collaborative Project?

ERIC Educational Resources Information Center

Cho, Moon-Heum; Lim, Seongmi; Lee, Kyeonghwa

2017-01-01

Students often complain about unsatisfactory experiences resulting from disproportionate contributions to collaborative projects. To improve the experience, we applied regulation theory to design a process to document regulation on a blog and examined whether such documentation enhanced students' self-regulation and co-regulation skills while…

78 FR 56811 - National Organic Program-Sunset Process

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-16

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 205 [Document Number AMS-NOP-13-0057; NOP-13-03] National Organic Program--Sunset Process AGENCY: Agricultural Marketing Service, USDA. ACTION: Notification of sunset process. SUMMARY: This document describes the sunset review and...

[Support of the nursing process through electronic nursing documentation systems (UEPD) – Initial validation of an instrument].

PubMed

Hediger, Hannele; Müller-Staub, Maria; Petry, Heidi

2016-01-01

Electronic nursing documentation systems, with standardized nursing terminology, are IT-based systems for recording the nursing processes. These systems have the potential to improve the documentation of the nursing process and to support nurses in care delivery. This article describes the development and initial validation of an instrument (known by its German acronym UEPD) to measure the subjectively-perceived benefits of an electronic nursing documentation system in care delivery. The validity of the UEPD was examined by means of an evaluation study carried out in an acute care hospital (n = 94 nurses) in German-speaking Switzerland. Construct validity was analyzed by principal components analysis. Initial references of validity of the UEPD could be verified. The analysis showed a stable four factor model (FS = 0.89) scoring in 25 items. All factors loaded ≥ 0.50 and the scales demonstrated high internal consistency (Cronbach's α = 0.73 – 0.90). Principal component analysis revealed four dimensions of support: establishing nursing diagnosis and goals; recording a case history/an assessment and documenting the nursing process; implementation and evaluation as well as information exchange. Further testing with larger control samples and with different electronic documentation systems are needed. Another potential direction would be to employ the UEPD in a comparison of various electronic documentation systems.

Implementation of nursing process in clinical settings: the case of three governmental hospitals in Ethiopia, 2017.

PubMed

Semachew, Ayele

2018-03-13

The purpose of this survey was to evaluate the implementation of the nursing process at three randomly selected governmental hospitals found in Amhara Region North West Ethiopia. From the total 338 reviewed documents, 264 (78.1%) have a nursing process format attached with the patient's profile/file, 107 (31.7%) had no nursing diagnosis, 185 (54.7%) of nurses stated their plan of care based on priority, 173 (51.2%) of nurses did not document their interventions based on plan and 179 (53.0%) of nurses did not evaluate their interventions. The overall implementation of nursing process among Felege Hiwot Referal hospital, Debretabor general hospital and Finoteselam general hospitals were 49.12, 68.18, and 69.42% respectively. Nursing professionals shall improve documentation required in implementing the nursing process. Nursing managers (matron, ward heads) shall supervise the overall implementation of nursing process. Hospital nursing services managers (matrons) shall arrange and facilitate case presentations by the nursing staffs which focus on documentation and updates on nursing process. Hospitals need to establish and support nursing process coordinating staff in their institution.

The Algorithm Theoretical Basis Document for Level 1A Processing

NASA Technical Reports Server (NTRS)

Jester, Peggy L.; Hancock, David W., III

2012-01-01

The first process of the Geoscience Laser Altimeter System (GLAS) Science Algorithm Software converts the Level 0 data into the Level 1A Data Products. The Level 1A Data Products are the time ordered instrument data converted from counts to engineering units. This document defines the equations that convert the raw instrument data into engineering units. Required scale factors, bias values, and coefficients are defined in this document. Additionally, required quality assurance and browse products are defined in this document.

36 CFR 219.54 - Filing an objection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or regulation. (2) Forest Service Directive System documents and land management plans or other... the objection process. (b) Including documents by reference is not allowed, except for the following... relevant section of the cited document. All other documents or Web links to those documents, or both must...

36 CFR 219.54 - Filing an objection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or regulation. (2) Forest Service Directive System documents and land management plans or other... the objection process. (b) Including documents by reference is not allowed, except for the following... relevant section of the cited document. All other documents or Web links to those documents, or both must...

GUI-Based Document Access via SATCOMMS: Online Electronic Document Retrieval at the European Telecommunications Satellite Organization EUTELSAT.

ERIC Educational Resources Information Center

Burton, Adrian P.

1995-01-01

Discusses accessing online electronic documents at the European Telecommunications Satellite Organization (EUTELSAT). Highlights include off-site paper document storage, the document management system, benefits, the EUTELSAT Standard IBM Access software, implementation, the development process, and future enhancements. (AEF)

How Analysts Cognitively “Connect the Dots”

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradel, Lauren; Self, Jessica S.; Endert, Alexander

2013-06-04

As analysts attempt to make sense of a collection of documents, such as intelligence analysis reports, they may wish to “connect the dots” between pieces of information that may initially seem unrelated. This process of synthesizing information between information requires users to make connections between pairs of documents, creating a conceptual story. We conducted a user study to analyze the process by which users connect pairs of documents and how they spatially arrange information. Users created conceptual stories that connected the dots using organizational strategies that ranged in complexity. We propose taxonomies for cognitive connections and physical structures used whenmore » trying to “connect the dots” between two documents. We compared the user-created stories with a data-mining algorithm that constructs chains of documents using co-occurrence metrics. Using the insight gained into the storytelling process, we offer design considerations for the existing data mining algorithm and corresponding tools to combine the power of data mining and the complex cognitive processing of analysts.« less

Web-based document image processing

NASA Astrophysics Data System (ADS)

Walker, Frank L.; Thoma, George R.

1999-12-01

Increasing numbers of research libraries are turning to the Internet for electron interlibrary loan and for document delivery to patrons. This has been made possible through the widespread adoption of software such as Ariel and DocView. Ariel, a product of the Research Libraries Group, converts paper-based documents to monochrome bitmapped images, and delivers them over the Internet. The National Library of Medicine's DocView is primarily designed for library patrons are beginning to reap the benefits of this new technology, barriers exist, e.g., differences in image file format, that lead to difficulties in the use of library document information. To research how to overcome such barriers, the Communications Engineering Branch of the Lister Hill National Center for Biomedical Communications, an R and D division of NLM, has developed a web site called the DocMorph Server. This is part of an ongoing intramural R and D program in document imaging that has spanned many aspects of electronic document conversion and preservation, Internet document transmission and document usage. The DocMorph Server Web site is designed to fill two roles. First, in a role that will benefit both libraries and their patrons, it allows Internet users to upload scanned image files for conversion to alternative formats, thereby enabling wider delivery and easier usage of library document information. Second, the DocMorph Server provides the design team an active test bed for evaluating the effectiveness and utility of new document image processing algorithms and functions, so that they may be evaluated for possible inclusion in other image processing software products being developed at NLM or elsewhere. This paper describes the design of the prototype DocMorph Server and the image processing functions being implemented on it.

Improving program documentation quality through the application of continuous improvement processes.

PubMed

Lovlien, Cheryl A; Johansen, Martha; Timm, Sandra; Eversman, Shari; Gusa, Dorothy; Twedell, Diane

2007-01-01

Maintaining the integrity of record keeping and retrievable information related to the provision of continuing education credit creates challenges for a large organization. Accurate educational program documentation is vital to support the knowledge and professional development of nursing staff. Quality review and accurate documentation of programs for nursing staff development occurred at one institution through the use of continuous improvement principles. Integration of the new process into the current system maintains the process of providing quality record keeping.

Means of storage and automated monitoring of versions of text technical documentation

NASA Astrophysics Data System (ADS)

Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

Monotone Increasing Binary Similarity and Its Application to Automatic Document-Acquisition of a Category

NASA Astrophysics Data System (ADS)

Suzuki, Izumi; Mikami, Yoshiki; Ohsato, Ario

A technique that acquires documents in the same category with a given short text is introduced. Regarding the given text as a training document, the system marks up the most similar document, or sufficiently similar documents, from among the document domain (or entire Web). The system then adds the marked documents to the training set to learn the set, and this process is repeated until no more documents are marked. Setting a monotone increasing property to the similarity as it learns enables the system to 1) detect the correct timing so that no more documents remain to be marked and to 2) decide the threshold value that the classifier uses. In addition, under the condition that the normalization process is limited to what term weights are divided by a p-norm of the weights, the linear classifier in which training documents are indexed in a binary manner is the only instance that satisfies the monotone increasing property. The feasibility of the proposed technique was confirmed through an examination of binary similarity and using English and German documents randomly selected from the Web.

Research Notes - Openness and Evolvability - Documentation Quality Assessment

DTIC Science & Technology

2016-08-01

UNCLASSIFIED UNCLASSIFIED Notes – Openness and Evolvability – Documentation Quality Assessment Michael Haddy* and Adam Sbrana...Methods and Processes. This set of Research Notes focusses on Documentation Quality Assessment. This work was undertaken from the late 1990s to 2007...1 2. DOCUMENTATION QUALITY ASSESSMENT ......................................................... 1 2.1 Documentation Quality Assessment

19 CFR 142.16 - Entry summary documentation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Entry summary documentation. 142.16 Section 142.16... TREASURY (CONTINUED) ENTRY PROCESS Entry Summary Documentation § 142.16 Entry summary documentation. (a) Entry summary not filed at time of entry. When the entry documentation is filed before the entry summary...

CrossTalk. The Journal of Defense Software Engineering. Volume 25, Number 3

DTIC Science & Technology

2012-06-01

OMG) standard Business Process Modeling and Nota- tion ( BPMN ) [6] graphical notation. I will address each of these: identify and document steps...to a value stream map using BPMN and textual process narratives. The resulting process narratives or process metadata includes key information...objectives. Once the processes are identified we can graphically document them capturing the process using BPMN (see Figure 1). The BPMN models

12 CFR 225.28 - List of permissible nonbanking activities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... financial nature and other business records and documents used in processing such media. 14 14 See also the... selling checks and related documents, including corporate image checks, cash tickets, voucher checks... checks. (14) Data processing. (i) Providing data processing, data storage and data transmission services...

12 CFR 225.28 - List of permissible nonbanking activities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... financial nature and other business records and documents used in processing such media. 13 13 See also the... selling checks and related documents, including corporate image checks, cash tickets, voucher checks... checks. (14) Data processing. (i) Providing data processing, data storage and data transmission services...

12 CFR 225.28 - List of permissible nonbanking activities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... financial nature and other business records and documents used in processing such media. 13 13 See also the... selling checks and related documents, including corporate image checks, cash tickets, voucher checks... checks. (14) Data processing. (i) Providing data processing, data storage and data transmission services...

12 CFR 225.28 - List of permissible nonbanking activities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... financial nature and other business records and documents used in processing such media. 13 13 See also the... selling checks and related documents, including corporate image checks, cash tickets, voucher checks... checks. (14) Data processing. (i) Providing data processing, data storage and data transmission services...

Preliminary guidelines and recommendations for the development of material and process specifications for carbon fiber-reinforced liquid resin molded materials.

DOT National Transportation Integrated Search

2007-05-01

This document recommends guidance and criteria for the development of material and process specifications and material acceptance documents for liquid resins and continuous carbon fiber reinforcement materials used in liquid molding processes to manu...

Text Mining in Biomedical Domain with Emphasis on Document Clustering.

PubMed

Renganathan, Vinaitheerthan

2017-07-01

With the exponential increase in the number of articles published every year in the biomedical domain, there is a need to build automated systems to extract unknown information from the articles published. Text mining techniques enable the extraction of unknown knowledge from unstructured documents. This paper reviews text mining processes in detail and the software tools available to carry out text mining. It also reviews the roles and applications of text mining in the biomedical domain. Text mining processes, such as search and retrieval of documents, pre-processing of documents, natural language processing, methods for text clustering, and methods for text classification are described in detail. Text mining techniques can facilitate the mining of vast amounts of knowledge on a given topic from published biomedical research articles and draw meaningful conclusions that are not possible otherwise.

System Architecture for Anti-Ship Ballistic Missile Defense (ASBMD)

DTIC Science & Technology

2009-12-01

this threat. This thesis documents the process that was used to select and integrate the proposed ASBMD architecture. 15. NUMBER OF PAGES 232...thesis documents the process that was used to select and integrate the proposed ASBMD architecture. vi This page is intentionally left blank...39 B. Process

Quality of nursing documentation: Paper-based health records versus electronic-based health records.

PubMed

Akhu-Zaheya, Laila; Al-Maaitah, Rowaida; Bany Hani, Salam

2018-02-01

To assess and compare the quality of paper-based and electronic-based health records. The comparison examined three criteria: content, documentation process and structure. Nursing documentation is a significant indicator of the quality of patient care delivery. It can be either paper-based or organised within the system known as the electronic health records. Nursing documentation must be completed at the highest standards, to ensure the safety and quality of healthcare services. However, the evidence is not clear on which one of the two forms of documentation (paper-based versus electronic health records is more qualified. A retrospective, descriptive, comparative design was used to address the study's purposes. A convenient number of patients' records, from two public hospitals, were audited using the Cat-ch-Ing audit instrument. The sample size consisted of 434 records for both paper-based health records and electronic health records from medical and surgical wards. Electronic health records were better than paper-based health records in terms of process and structure. In terms of quantity and quality content, paper-based records were better than electronic health records. The study affirmed the poor quality of nursing documentation and lack of nurses' knowledge and skills in the nursing process and its application in both paper-based and electronic-based systems. Both forms of documentation revealed drawbacks in terms of content, process and structure. This study provided important information, which can guide policymakers and administrators in identifying effective strategies aimed at enhancing the quality of nursing documentation. Policies and actions to ensure quality nursing documentation at the national level should focus on improving nursing knowledge, competencies, practice in nursing process, enhancing the work environment and nursing workload, as well as strengthening the capacity building of nursing practice to improve the quality of nursing care and patients' outcomes. © 2017 John Wiley & Sons Ltd.

Data Quality Objectives for Tank Farms Waste Compatibility Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

BANNING, D.L.

1999-07-02

There are 177 waste storage tanks containing over 210,000 m{sup 3} (55 million gal) of mixed waste at the Hanford Site. The River Protection Project (RPP) has adopted the data quality objective (DQO) process used by the U.S. Environmental Protection Agency (EPA) (EPA 1994a) and implemented by RPP internal procedure (Banning 1999a) to identify the information and data needed to address safety issues. This DQO document is based on several documents that provide the technical basis for inputs and decision/action levels used to develop the decision rules that evaluate the transfer of wastes. A number of these documents are presentlymore » in the process of being revised. This document will need to be revised if there are changes to the technical criteria in these supporting documents. This DQO process supports various documents, such as sampling and analysis plans and double-shell tank (DST) waste analysis plans. This document identifies the type, quality, and quantity of data needed to determine whether transfer of supernatant can be performed safely. The requirements in this document are designed to prevent the mixing of incompatible waste as defined in Washington Administrative Code (WAC) 173-303-040. Waste transfers which meet the requirements contained in this document and the Double-Shell Tank Waste Analysis Plan (Mulkey 1998) are considered to be compatible, and prevent the mixing of incompatible waste.« less

Query Expansion for Noisy Legal Documents

DTIC Science & Technology

2008-11-01

9] G. Salton (ed). The SMART retrieval system experiments in automatic document processing. 1971. [10] H. Schutze and J . Pedersen. A cooccurrence...Language Modeling and Information Retrieval. http://www.lemurproject.org. [2] J . Baron, D. Lewis, and D. Oard. TREC 2006 legal track overview. In...Retrieval, 1993. [8] J . Rocchio. Relevance feedback in information retrieval. In The SMART retrieval system experiments in automatic document processing, 1971

You're a What? Process Server

ERIC Educational Resources Information Center

Torpey, Elka

2012-01-01

In this article, the author talks about the role and functions of a process server. The job of a process server is to hand deliver legal documents to the people involved in court cases. These legal documents range from a summons to appear in court to a subpoena for producing evidence. Process serving can involve risk, as some people take out their…

Software Process Automation: Experiences from the Trenches.

DTIC Science & Technology

1996-07-01

Integration of problem database Weaver tions) J Process WordPerfect, All-in-One, Oracle, CM Integration of tools Weaver System K Process Framemaker , CM...handle change requests and problem reports. * Autoplan, a project management tool * Framemaker , a document processing system * Worldview, a document...Cadre, Team Work, FrameMaker , some- thing for requirements traceability, their own homegrown scheduling tool, and their own homegrown tool integrator

Issues in Commercial Document Delivery.

ERIC Educational Resources Information Center

Marcinko, Randall Wayne

1997-01-01

Discusses (1) the history of document delivery; (2) the delivery process--end-user request, intermediary request, vendor reference, citation verification, obtaining document and source relations, quality control, transferring document to client, customer service and status, invoicing and billing, research and development, and copyright; and (3)…

The Ensemble Photometric Variability of Over 105 Quasars in the Dark Energy Camera Legacy Survey and the Sloan Digital Sky Survey

NASA Astrophysics Data System (ADS)

Li, Zefeng; McGreer, Ian D.; Wu, Xue-Bing; Fan, Xiaohui; Yang, Qian

2018-07-01

We present the ensemble variability analysis results of quasars using the Dark Energy Camera Legacy Survey (DECaLS) and the Sloan Digital Sky Survey (SDSS) quasar catalogs. Our data set includes 119,305 quasars with redshifts up to 4.89. Combining the two data sets provides a 15 year baseline and permits the analysis of the long timescale variability. Adopting a power-law form for the variability structure function, V=A{(t/1{years})}γ , we use the multidimensional parametric fitting to explore the relationships between the quasar variability amplitude and a wide variety of quasar properties, including redshift (positive), bolometric luminosity (negative), rest-frame wavelength (negative), and black hole mass (uncertain). We also find that γ can be also expressed as a function of redshift (negative), bolometric luminosity (positive), rest-frame wavelength (positive), and black hole mass (positive). Tests of the fitting significance with the bootstrap method show that, even with such a large quasar sample, some correlations are marginally significant. The typical value of γ for the entire data set is ≳0.25, consistent with the results in previous studies on both the quasar ensemble variability and the structure function. A significantly negative correlation between the variability amplitude and the Eddington ratio is found, which may be explained as an effect of accretion disk instability.

Correlates of avian building strikes at a glass façade museum surrounded by avian habitat

NASA Astrophysics Data System (ADS)

Kahle, L.; Flannery, M.; Dumbacher, J. P.

2013-12-01

Bird window collisions are the second largest anthropogenic cause of bird deaths in the world. Effective mitigation requires an understanding of which birds are most likely to strike, when, and why. Here, we examine five years of avian window strike data from the California Academy of Sciences - a relatively new museum with significant glass façade situated in Golden Gate Park, San Francisco. We examine correlates of window-killed birds, including age, sex, season, and migratory or sedentary tendencies of the birds. We also examine correlates of window kills such as presence of habitat surrounding the building and overall window area. We found that males are almost three times more likely than females to mortally strike windows, and immature birds are three times more abundant than adults in our window kill dataset. Among seasons, strikes were not notably different in spring, summer, and fall; however they were notably reduced in winter. There was no statistical effect of building orientation (north, south, east, or west), and the presence of avian habitat directly adjacent to windows had a minor effect. We also report ongoing studies examining various efforts to reduce window kill (primarily external decals and large electronic window blinds.) We hope that improving our understanding of the causes of the window strikes will help us strategically reduce window strikes.

Exp 38 Patch Design - decal file allpath Replacement Pantones 4-

NASA Image and Video Library

2013-04-30

ISS038-S-001 (April 2013) --- As the International Space Station (ISS) has become a stepping stone to future space exploration, the Expedition 38 mission patch design paints a visual roadmap of exploration beyond low Earth orbit, most prominently represented by the design?s flowing Expedition 38 mission numbers that wrap around Earth, the moon and Mars. Just as the sun is a guiding light in the galaxy, the ISS illuminates the bottom of the design as it is a shining beacon of the advancement of science, knowledge, and technology carried out aboard the Space Station. To visually capture the idea of the ISS being a foundation for infinite discovery, the space station?s iconic solar arrays span upwards, providing the number 38 and its exploration roadmap a symbolic pedestal to rest on. Finally, the overall use of red, white, and blue in the design acknowledges the flags of the countries of origin for Expedition 38?s crew ? the United States, Russia, and Japan. The NASA insignia design for space shuttle flights is reserved for use by the astronauts and for other official use as the NASA Administrator may authorize. Public availability has been approved only in the forms of illustrations by the various news media. When and if there is any change in this policy, which is not anticipated, the change will be publicly announced. Photo credit: NASA

E-nursing documentation as a tool for quality assurance.

PubMed

Rajkovic, Vladislav; Sustersic, Olga; Rajkovic, Uros

2006-01-01

The article presents the results of a project with which we describe the reengineering of nursing documentation. Documentation in nursing is an efficient tool for ensuring quality health care and consequently quality patient treatment along the whole clinical path. We have taken into account the nursing process and patient treatment based on Henderson theoretical model of nursing that consists of 14 basic living activities. The model of new documentation enables tracing, transparency, selectivity, monitoring and analyses. All these factors lead to improvements of a health system as well as to improved safety of patients and members of nursing teams. Thus the documentation was developed for three health care segments: secondary and tertiary level, dispensaries and community health care. The new quality introduced to the documentation process by information and communication technology is presented by a database model and a software prototype for managing documentation.

75 FR 32858 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Control of Nitrogen...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... Boilers and Process Heaters at Petroleum Refineries Correction In rule document 2010-13377 beginning on... limitations for Control [Insert page number any industrial boiler or Requirements. where the document process...

Text Mining in Biomedical Domain with Emphasis on Document Clustering

PubMed Central

2017-01-01

Objectives With the exponential increase in the number of articles published every year in the biomedical domain, there is a need to build automated systems to extract unknown information from the articles published. Text mining techniques enable the extraction of unknown knowledge from unstructured documents. Methods This paper reviews text mining processes in detail and the software tools available to carry out text mining. It also reviews the roles and applications of text mining in the biomedical domain. Results Text mining processes, such as search and retrieval of documents, pre-processing of documents, natural language processing, methods for text clustering, and methods for text classification are described in detail. Conclusions Text mining techniques can facilitate the mining of vast amounts of knowledge on a given topic from published biomedical research articles and draw meaningful conclusions that are not possible otherwise. PMID:28875048

32 CFR 239.12 - Tax documentation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 2 2011-07-01 2011-07-01 false Tax documentation. 239.12 Section 239.12...) MISCELLANEOUS HOMEOWNERS ASSISTANCE PROGRAM-APPLICATION PROCESSING § 239.12 Tax documentation. For disbursed funds, tax documents (if necessary) will be certified by HQUSACE Finance Center and distributed to...

32 CFR 239.12 - Tax Documentation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Tax Documentation. 239.12 Section 239.12...) MISCELLANEOUS HOMEOWNERS ASSISTANCE PROGRAM-APPLICATION PROCESSING § 239.12 Tax Documentation. For disbursed funds, tax documents will be certified by HQUSACE Finance Center, and distributed to applicants and the...

50 CFR 221.12 - Where and how must documents be filed?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Hearing Process Document Filing and Service § 221.12 Where and how must documents be filed? (a) Place of... facsimile if: (A) The document is 20 pages or less, including all attachments; (B) The sending facsimile..., any document received after 5 p.m. at the place where the filing is due is considered filed on the...

Electronic health record interventions at the point of care improve documentation of care processes and decrease orders for genetic tests commonly ordered by nongeneticists.

PubMed

Scheuner, Maren T; Peredo, Jane; Tangney, Kelly; Schoeff, Diane; Sale, Taylor; Lubick-Goldzweig, Caroline; Hamilton, Alison; Hilborne, Lee; Lee, Martin; Mittman, Brian; Yano, Elizabeth M; Lubin, Ira M

2017-01-01

To determine whether electronic health record (EHR) tools improve documentation of pre- and postanalytic care processes for genetic tests ordered by nongeneticists. We conducted a nonrandomized, controlled, pre-/postintervention study of EHR point-of-care tools (informational messages and template report) for three genetic tests. Chart review assessed documentation of genetic testing processes of care, with points assigned for each documented item. Multiple linear and logistic regressions assessed factors associated with documentation. Preimplementation, there were no significant site differences (P > 0.05). Postimplementation, mean documentation scores increased (5.9 (2.1) vs. 5.0 (2.2); P = 0.0001) and records with clinically meaningful documentation increased (score >5: 59 vs. 47%; P = 0.02) at the intervention versus the control site. Pre- and postimplementation, a score >5 was positively associated with abnormal test results (OR = 4.0; 95% CI: 1.8-9.2) and trainee provider (OR = 2.3; 95% CI: 1.2-4.6). Postimplementation, a score >5 was also positively associated with intervention site (OR = 2.3; 95% CI: 1.1-5.1) and specialty clinic (OR = 2.0; 95% CI: 1.1-3.6). There were also significantly fewer tests ordered after implementation (264/100,000 vs. 204/100,000; P = 0.03), with no significant change at the control site (280/100,000 vs. 257/100,000; P = 0.50). EHR point-of-care tools improved documentation of genetic testing processes and decreased utilization of genetic tests commonly ordered by nongeneticists.Genet Med 19 1, 112-120.

Tank waste remediation system privatization infrastructure program requirements and document management process guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

ROOT, R.W.

1999-05-18

This guide provides the Tank Waste Remediation System Privatization Infrastructure Program management with processes and requirements to appropriately control information and documents in accordance with the Tank Waste Remediation System Configuration Management Plan (Vann 1998b). This includes documents and information created by the program, as well as non-program generated materials submitted to the project. It provides appropriate approval/control, distribution and filing systems.

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

Operational Control Procedures for the Activated Sludge Process, Part III-B: Calculation Procedures for Step-Feed Process Responses and Addendum No. 1.

ERIC Educational Resources Information Center

West, Alfred W.

This is the third in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. This document deals with the calculation procedures associated with a step-feed process. Illustrations and examples are included to…

A KPI framework for process-based benchmarking of hospital information systems.

PubMed

Jahn, Franziska; Winter, Alfred

2011-01-01

Benchmarking is a major topic for monitoring, directing and elucidating the performance of hospital information systems (HIS). Current approaches neglect the outcome of the processes that are supported by the HIS and their contribution to the hospital's strategic goals. We suggest to benchmark HIS based on clinical documentation processes and their outcome. A framework consisting of a general process model and outcome criteria for clinical documentation processes is introduced.

32 CFR 989.23 - Contractor prepared documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Contractor prepared documents. 989.23 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.23 Contractor prepared documents. All Air Force... should reflect on the cover sheet they are an Air Force document. Contractor preparation information...

Data Provenance in Photogrammetry Through Documentation Protocols

NASA Astrophysics Data System (ADS)

Carboni, N.; Bruseker, G.; Guillem, A.; Bellido Castañeda, D.; Coughenour, C.; Domajnko, M.; de Kramer, M.; Ramos Calles, M. M.; Stathopoulou, E. K.; Suma, R.

2016-06-01

Documenting the relevant aspects in digitisation processes such as photogrammetry in order to provide a robust provenance for their products continues to present a challenge. The creation of a product that can be re-used scientifically requires a framework for consistent, standardised documentation of the entire digitisation pipeline. This article provides an analysis of the problems inherent to such goals and presents a series of protocols to document the various steps of a photogrammetric workflow. We propose this pipeline, with descriptors to track all phases of digital product creation in order to assure data provenance and enable the validation of the operations from an analytic and production perspective. The approach aims to support adopters of the workflow to define procedures with a long term perspective. The conceptual schema we present is founded on an analysis of information and actor exchanges in the digitisation process. The metadata were defined through the synthesis of previous proposals in this area and were tested on a case study. We performed the digitisation of a set of cultural heritage artefacts from an Iron Age burial in Ilmendorf, Germany. The objects were captured and processed using different techniques, including a comparison of different imaging tools and algorithms. This augmented the complexity of the process allowing us to test the flexibility of the schema for documenting complex scenarios. Although we have only presented a photogrammetry digitisation scenario, we claim that our schema is easily applicable to a multitude of 3D documentation processes.

Automated Generation of Technical Documentation and Provenance for Reproducible Research

NASA Astrophysics Data System (ADS)

Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

2017-12-01

Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

Designing the Horizons of Your Small Business.

ERIC Educational Resources Information Center

Helgemo, Robert R.

This manual outlines the planning process for developing a feasibility study for a small business. The material is composed of three parts: the planning documents filled out for an imaginary campground; a business plan summarized from the planning documents; and blank planning documents with introductions and instructions. The documents can be…

14 CFR 302.3 - Filing of documents.

Code of Federal Regulations, 2013 CFR

2013-01-01

... in Washington, DC. Documents may be filed either on paper or by electronic means using the process set at the DOT Dockets Management System (DMS) internet website. (2) Such documents will be deemed to... below the space provided for signature. Electronic filers need only submit one copy of the document...

14 CFR 302.3 - Filing of documents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... in Washington, DC. Documents may be filed either on paper or by electronic means using the process set at the DOT Dockets Management System (DMS) internet website. (2) Such documents will be deemed to... below the space provided for signature. Electronic filers need only submit one copy of the document...

5 CFR 850.303 - Return of personal documents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REGULATIONS (CONTINUED) ELECTRONIC RETIREMENT PROCESSING Records § 850.303 Return of personal documents. An..., OPM may provide the individual with a copy of the document that is derived from electronic records. ... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Return of personal documents. 850.303...

14 CFR 302.3 - Filing of documents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... in Washington, DC. Documents may be filed either on paper or by electronic means using the process set at the DOT Dockets Management System (DMS) internet website. (2) Such documents will be deemed to... below the space provided for signature. Electronic filers need only submit one copy of the document...

14 CFR 302.3 - Filing of documents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... in Washington, DC. Documents may be filed either on paper or by electronic means using the process set at the DOT Dockets Management System (DMS) internet website. (2) Such documents will be deemed to... below the space provided for signature. Electronic filers need only submit one copy of the document...

Automatic Classification Using Supervised Learning in a Medical Document Filtering Application.

ERIC Educational Resources Information Center

Mostafa, J.; Lam, W.

2000-01-01

Presents a multilevel model of the information filtering process that permits document classification. Evaluates a document classification approach based on a supervised learning algorithm, measures the accuracy of the algorithm in a neural network that was trained to classify medical documents on cell biology, and discusses filtering…

38 CFR 26.7 - VA environmental decision making and documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... environmental decision making and documents. (a) Relevant environmental documents shall accompany other decision documents as they proceed through the decision-making process. (b) The major decision points for VA actions... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false VA environmental decision...

A Review of Literature: Training and the Change Process.

ERIC Educational Resources Information Center

Olivier, Maurice

This document is a review of literature on the educational change process; it is designed to detail the role of training in the process of dissemination in a changing climate of education. To do this, it gives attention to defining educational change. The document is divided into five chapters. Chapter one, entitled "Defining the Change…

Orbiter data reduction complex data processing requirements for the OFT mission evaluation team (level C)

NASA Technical Reports Server (NTRS)

1979-01-01

This document addresses requirements for post-test data reduction in support of the Orbital Flight Tests (OFT) mission evaluation team, specifically those which are planned to be implemented in the ODRC (Orbiter Data Reduction Complex). Only those requirements which have been previously baselined by the Data Systems and Analysis Directorate configuration control board are included. This document serves as the control document between Institutional Data Systems Division and the Integration Division for OFT mission evaluation data processing requirements, and shall be the basis for detailed design of ODRC data processing systems.

Red Plague Control Plan (RPCP)

NASA Technical Reports Server (NTRS)

Cooke, Robert W.

2010-01-01

SCOPE: Prescribes the minimum requirements for the control of cuprous / cupric oxide corrosion (a.k.a. Red Plague) of silver-coated copper wire, cable, and harness assemblies. PURPOSE: Targeted for applications where exposure to assembly processes, environmental conditions, and contamination may promote the development of cuprous / cupric oxide corrosion (a.k.a. Red Plague) in silver-coated copper wire, cable, and harness assemblies. Does not exclude any alternate or contractor-proprietary documents or processes that meet or exceed the baseline of requirements established by this document. Use of alternate or contractor-proprietary documents or processes shall require review and prior approval of the procuring NASA activity.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendonsa, D; Nekoogar, F; Martz, H

This document describes the functionality of every component in the DHS/IDD archival and storage hardware system shown in Fig. 1. The document describes steps by step process of image data being received at LLNL then being processed and made available to authorized personnel and collaborators. Throughout this document references will be made to one of two figures, Fig. 1 describing the elements of the architecture and the Fig. 2 describing the workflow and how the project utilizes the available hardware.

ASTP experiment support data processing

NASA Technical Reports Server (NTRS)

Osburn, R. K.; Barnett, E. L.; Moore, H. L.; Moore, J. B.; Ball, J. R.

1975-01-01

Activities associated with the generation of ASTP experiment support data in the areas of spacecraft ephemeris and orientation and instrument pointing and field-of-view are documented. It is intended that this document represent a cradle-to-grave chronicle of these activities. To satisfy this intent while facilitating the ready dissemination of information, the document is being published twice. The first publication, scheduled for release prior to ASTP liftoff, includes all preflight phases of the experiment support activity in addition to those appendixes that do not pertain to any mission-specific data. The second publication will provide any required updates to the original documentation and will add all mission-specific data, including documentation of all postflight data processing activities and data archiving information.

Process Engineering with the Evolutionary Spiral Process Model. Version 01.00.06

DTIC Science & Technology

1994-01-01

program . Process Definition and SPC-92041-CMC Provides methods for defining and Modeling Guidebook documenting processes so they can be analyzed, modified...and Program Evaluation and Review Technique (PERT) support the activity of developing a project schedule. A variety of automated tools, such as...keep the organiza- tion from becoming disoriented during the improvement program (Curtis, Kellner, and Over 1992). Analyzing and documenting how

Digital Documentation: Using Computers to Create Multimedia Reports.

ERIC Educational Resources Information Center

Speitel, Tom; And Others

1996-01-01

Describes methods for creating integrated multimedia documents using recent advances in print, audio, and video digitization that bring added usefulness to computers as data acquisition, processing, and presentation tools. Discusses advantages of digital documentation. (JRH)

Draft federal GHG accounting and reporting : technical support document

DOT National Transportation Integrated Search

2010-07-01

This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

78 FR 52776 - Documents to Support Submission of an Electronic Common Technical Document; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

... obtain the documents at either http://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmission...BloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm . Dated: August 20, 2013...

78 FR 10181 - Documents To Support Submission of an Electronic Common Technical Document; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

... obtain the documents at either http://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmission...BloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm . Dated: February 8, 2013...

Development of the Quality of Australian Nursing Documentation in Aged Care (QANDAC) instrument to assess paper-based and electronic resident records.

PubMed

Wang, Ning; Björvell, Catrin; Hailey, David; Yu, Ping

2014-12-01

To develop an Australian nursing documentation in aged care (Quality of Australian Nursing Documentation in Aged Care (QANDAC)) instrument to measure the quality of paper-based and electronic resident records. The instrument was based on the nursing process model and on three attributes of documentation quality identified in a systematic review. The development process involved five phases following approaches to designing criterion-referenced measures. The face and content validities and the inter-rater reliability of the instrument were estimated using a focus group approach and consensus model. The instrument contains 34 questions in three sections: completion of nursing history and assessment, description of care process and meeting the requirements of data entry. Estimates of the validity and inter-rater reliability of the instrument gave satisfactory results. The QANDAC instrument may be a useful audit tool for quality improvement and research in aged care documentation. © 2013 ACOTA.

Development of Innovative Design Processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Y.S.; Park, C.O.

2004-07-01

The nuclear design analysis requires time-consuming and erroneous model-input preparation, code run, output analysis and quality assurance process. To reduce human effort and improve design quality and productivity, Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented design and the web-based design. The document-oriented design is that, if the designer writes a design document called active document and feeds it to a special program, the final document with complete analysis, table and plots is made automatically. The active documents can be written with ordinary HTML editors or created automatically on the web, which ismore » another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment, the design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R and D tasks of KNFC. (authors)« less

Information Pre-Processing using Domain Meta-Ontology and Rule Learning System

NASA Astrophysics Data System (ADS)

Ranganathan, Girish R.; Biletskiy, Yevgen

Around the globe, extraordinary amounts of documents are being created by Enterprises and by users outside these Enterprises. The documents created in the Enterprises constitute the main focus of the present chapter. These documents are used to perform numerous amounts of machine processing. While using thesedocuments for machine processing, lack of semantics of the information in these documents may cause misinterpretation of the information, thereby inhibiting the productiveness of computer assisted analytical work. Hence, it would be profitable to the Enterprises if they use well defined domain ontologies which will serve as rich source(s) of semantics for the information in the documents. These domain ontologies can be created manually, semi-automatically or fully automatically. The focus of this chapter is to propose an intermediate solution which will enable relatively easy creation of these domain ontologies. The process of extracting and capturing domain ontologies from these voluminous documents requires extensive involvement of domain experts and application of methods of ontology learning that are substantially labor intensive; therefore, some intermediate solutions which would assist in capturing domain ontologies must be developed. This chapter proposes a solution in this direction which involves building a meta-ontology that will serve as an intermediate information source for the main domain ontology. This chapter proposes a solution in this direction which involves building a meta-ontology as a rapid approach in conceptualizing a domain of interest from huge amount of source documents. This meta-ontology can be populated by ontological concepts, attributes and relations from documents, and then refined in order to form better domain ontology either through automatic ontology learning methods or some other relevant ontology building approach.

1 CFR 18.1 - Original and copies required.

Code of Federal Regulations, 2011 CFR

2011-01-01

... General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.1 Original and copies... computer processed data are urged to consult with the Office of the Federal Register staff about possible...

1 CFR 18.1 - Original and copies required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.1 Original and copies... computer processed data are urged to consult with the Office of the Federal Register staff about possible...

Modern Corneal Eye-Banking Using a Software-Based IT Management Solution.

PubMed

Kern, C; Kortuem, K; Wertheimer, C; Nilmayer, O; Dirisamer, M; Priglinger, S; Mayer, W J

2018-01-01

Increasing government legislation and regulations in manufacturing have led to additional documentation regarding the pharmaceutical product requirements of corneal grafts in the European Union. The aim of this project was to develop a software within a hospital information system (HIS) to support the documentation process, to improve the management of the patient waiting list and to increase informational flow between the clinic and eye bank. After an analysis of the current documentation process, a new workflow and software were implemented in our electronic health record (EHR) system. The software takes over most of the documentation and reduces the time required for record keeping. It guarantees real-time tracing of all steps during human corneal tissue processing from the start of production until allocation during surgery and includes follow-up within the HIS. Moreover, listing of the patient for surgery as well as waiting list management takes place in the same system. The new software for corneal eye banking supports the whole process chain by taking over both most of the required documentation and the management of the transplant waiting list. It may provide a standardized IT-based solution for German eye banks working within the same HIS.

Strategic Mobility 21 Initial Capabilities Document (ICD)

DTIC Science & Technology

2006-07-28

MANDATORY ARCHITECTURE FRAMWORK DOCUMENT .......................................A-1 APPENDIX B: REFERENCES...Document July 27, 2006 JPPSP ICD Version 1.0 A-1 APPENDIX A: MANDATORY ARCHITECTURE FRAMWORK DOCUMENT Legend next page. Initial Capabilities...SM21 will combine several end-to-end Force Projection Process enablers. Some of the enablers described below are at the conceptual stage while others

Changing School Culture: Using Documentation to Support Collaborative Inquiry

ERIC Educational Resources Information Center

Given, Heidi; Kuh, Lisa; LeeKeenan, Debbie; Mardell, Ben; Redditt, Susan; Twombly, Susan

2010-01-01

This article considers how documentation as a professional development tool acts as a change agent for teachers and how collective engagement in the documentation process mediates the inherent tensions of working and learning in a group. Three groups of educators, at three distinct schools, used Reggio Emilia-inspired documentation as the…

Information Scanning and Processing at the Nuclear Safety Information Center.

ERIC Educational Resources Information Center

Parks, Celia; Julian, Carol

This report is a detailed manual of the information specialist's duties at the Nuclear Safety Information Center. Information specialists scan the literature for documents to be reviewed, procure the documents (books, journal articles, reports, etc.), keep the document location records, and return the documents to the plant library or other…

78 FR 22554 - Document to Support Submission of an Electronic Common Technical Document-Specifications for File...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... documents at either http://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmissionRequirements...Vaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm . Dated: April 10, 2013. Leslie Kux...

Textual blocks rectification method based on fast Hough transform analysis in identity documents recognition

NASA Astrophysics Data System (ADS)

Bezmaternykh, P. V.; Nikolaev, D. P.; Arlazarov, V. L.

2018-04-01

Textual blocks rectification or slant correction is an important stage of document image processing in OCR systems. This paper considers existing methods and introduces an approach for the construction of such algorithms based on Fast Hough Transform analysis. A quality measurement technique is proposed and obtained results are shown for both printed and handwritten textual blocks processing as a part of an industrial system of identity documents recognition on mobile devices.

Implementation of a School-wide Clinical Intervention Documentation System

PubMed Central

Stevenson, T. Lynn; Fox, Brent I.; Andrus, Miranda; Carroll, Dana

2011-01-01

Objective. To evaluate the effectiveness and impact of a customized Web-based software program implemented in 2006 for school-wide documentation of clinical interventions by pharmacy practice faculty members, pharmacy residents, and student pharmacists. Methods. The implementation process, directed by a committee of faculty members and school administrators, included preparation and refinement of the software, user training, development of forms and reports, and integration of the documentation process within the curriculum. Results. Use of the documentation tool consistently increased from May 2007 to December 2010. Over 187,000 interventions were documented with over $6.2 million in associated cost avoidance. Conclusions. Successful implementation of a school-wide documentation tool required considerable time from the oversight committee and a comprehensive training program for all users, with ongoing monitoring of data collection practices. Data collected proved to be useful to show the impact of faculty members, residents, and student pharmacists at affiliated training sites. PMID:21829264

NASA Construction of Facilities Validation Processes - Total Building Commissioning (TBCx)

NASA Technical Reports Server (NTRS)

Hoover, Jay C.

2004-01-01

Key Atributes include: Total Quality Management (TQM) System that looks at all phases of a project. A team process that spans boundaries. A Commissioning Authority to lead the process. Commissioning requirements in contracts. Independent design review to verify compliance with Facility Project Requirements (FPR). Formal written Commissioning Plan with Documented Results. Functional performance testing (FPT) against the requirements document.

22 CFR 92.94 - Replying to inquiries regarding service of process or other documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... regarding the service of legal process or documents of like nature, and should render such assistance as...)). If the person upon whom the process is intended to be served is known to be willing to accept service... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Replying to inquiries regarding service of...

Wang OIS glossary package for reformatting documents telecommunicated to the OIS system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markow, S.R.

1983-12-09

Documents that are composed on a computer and then transmitted by telecommunications into a Wang Office Information System (OIS) word processing system need to be reformatted and cleaned up before they can be used properly as word processing documents suitable for further revisions or additions. This report describes a group of glossary entries created for the Wang OIS which simplifies the job of cleaning up telecommunicated documents. This glossary is a semi-automated process designed to eliminate most of the tedious work needed to be performed in removing extra spaces and returns, adjusting formats, moving material, repagination, using tabs or indents,more » and similar problems. The report briefly discusses the problems, describes the glossary approach to solving them, and gives instructions for actually using the glossary entries.« less

Using 3D range cameras for crime scene documentation and legal medicine

NASA Astrophysics Data System (ADS)

Cavagnini, Gianluca; Sansoni, Giovanna; Trebeschi, Marco

2009-01-01

Crime scene documentation and legal medicine analysis are part of a very complex process which is aimed at identifying the offender starting from the collection of the evidences on the scene. This part of the investigation is very critical, since the crime scene is extremely volatile, and once it is removed, it can not be precisely created again. For this reason, the documentation process should be as complete as possible, with minimum invasiveness. The use of optical 3D imaging sensors has been considered as a possible aid to perform the documentation step, since (i) the measurement is contactless and (ii) the process required to editing and modeling the 3D data is quite similar to the reverse engineering procedures originally developed for the manufacturing field. In this paper we show the most important results obtained in the experimentation.

7 CFR 372.9 - Processing and use of environmental documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to environmental assessments and findings of no significant impact that are prompted by comments, new... Section 372.9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH....9 Processing and use of environmental documents. (a) Environmental assessments will be forwarded...

7 CFR 372.9 - Processing and use of environmental documents.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to environmental assessments and findings of no significant impact that are prompted by comments, new... Section 372.9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH....9 Processing and use of environmental documents. (a) Environmental assessments will be forwarded...

IDC Re-Engineering Phase 2 System Requirements Document Version 1.4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, James M.; Burns, John F.; Satpathi, Meara Allena

This System Requirements Document (SRD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The IDC applies, on a routine basis, automatic processing methods and interactive analysis to raw International Monitoring System (IMS) data in order to produce, archive, and distribute standard IDC products on behalf of all States Parties. The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide data,more » but includes requirements for the dissemination of radionuclide data and products.« less

IDC Re-Engineering Phase 2 System Requirements Document V1.3.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, James M.; Burns, John F.; Satpathi, Meara Allena

2015-12-01

This System Requirements Document (SRD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The IDC applies, on a routine basis, automatic processing methods and interactive analysis to raw International Monitoring System (IMS) data in order to produce, archive, and distribute standard IDC products on behalf of all States Parties. The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide datamore » but includes requirements for the dissemination of radionuclide data and products.« less

Knowledge enabled plan of care and documentation prototype.

PubMed

DaDamio, Rebecca; Gugerty, Brian; Kennedy, Rosemary

2006-01-01

There exist significant challenges in integrating the plan of care into documentation and point of care operational processes. A plan of care is often a static artifact that meets regulatory standards with limited influence on supporting goal-directed care delivery processes. Although this prototype is applicable to many clinical disciplines, we will highlight nursing processes in demonstrating a knowledge-driven computerized solution that fully integrates the plan of care within documentation. The knowledge-driven solution reflects evidenced-based practice; is an effective tool for managing problems, orders/interventions, and the patient's progress towards expected outcomes; meets regulatory standards; and drives quality and process improvement. The knowledge infrastructure consists of fully represented terminology, structured clinical expressions utilizing the controlled terminology and clinical knowledge representing evidence-based practice.

Crew Transportation Technical Management Processes

NASA Technical Reports Server (NTRS)

Mckinnie, John M. (Compiler); Lueders, Kathryn L. (Compiler)

2013-01-01

Under the guidance of processes provided by Crew Transportation Plan (CCT-PLN-1100), this document, with its sister documents, International Space Station (ISS) Crew Transportation and Services Requirements Document (CCT-REQ-1130), Crew Transportation Technical Standards and Design Evaluation Criteria (CCT-STD-1140), Crew Transportation Operations Standards (CCT STD-1150), and ISS to Commercial Orbital Transportation Services Interface Requirements Document (SSP 50808), provides the basis for a National Aeronautics and Space Administration (NASA) certification for services to the ISS for the Commercial Provider. When NASA Crew Transportation System (CTS) certification is achieved for ISS transportation, the Commercial Provider will be eligible to provide services to and from the ISS during the services phase.

Discharge documentation of patients discharged to subacute facilities: a three-year quality improvement process across an integrated health care system.

PubMed

Gandara, Esteban; Ungar, Jonathan; Lee, Jason; Chan-Macrae, Myrna; O'Malley, Terrence; Schnipper, Jeffrey L

2010-06-01

Effective communication among physicians during hospital discharge is critical to patient care. Partners Healthcare (Boston) has been engaged in a multi-year process to measure and improve the quality of documentation of all patients discharged from its five acute care hospitals to subacute facilities. Partners first engaged stakeholders to develop a consensus set of 12 required data elements for all discharges to subacute facilities. A measurement process was established and later refined. Quality improvement interventions were then initiated to address measured deficiencies and included education of physicians and nurses, improvements in information technology, creation of or improvements in discharge documentation templates, training of hospitalists to serve as role models, feedback to physicians and their service chiefs regarding reviewed cases, and case manager review of documentation before discharge. To measure improvement in quality as a result of these efforts, rates of simultaneous inclusion of all 12 applicable data elements ("defect-free rate") were analyzed over time. Some 3,101 discharge documentation packets of patients discharged to subacute facilities from January 1, 2006, through September 2008 were retrospectively studied. During the 11 monitored quarters, the defect-free rate increased from 65% to 96% (p < .001 for trend). The largest improvements were seen in documentation of preadmission medication lists, allergies, follow-up, and warfarin information. Institution of rigorous measurement, feedback, and multidisciplinary, multimodal quality improvement processes improved the inclusion of data elements in discharge documentation required for safe hospital discharge across a large integrated health care system.

An index-based algorithm for fast on-line query processing of latent semantic analysis

PubMed Central

Li, Pohan; Wang, Wei

2017-01-01

Latent Semantic Analysis (LSA) is widely used for finding the documents whose semantic is similar to the query of keywords. Although LSA yield promising similar results, the existing LSA algorithms involve lots of unnecessary operations in similarity computation and candidate check during on-line query processing, which is expensive in terms of time cost and cannot efficiently response the query request especially when the dataset becomes large. In this paper, we study the efficiency problem of on-line query processing for LSA towards efficiently searching the similar documents to a given query. We rewrite the similarity equation of LSA combined with an intermediate value called partial similarity that is stored in a designed index called partial index. For reducing the searching space, we give an approximate form of similarity equation, and then develop an efficient algorithm for building partial index, which skips the partial similarities lower than a given threshold θ. Based on partial index, we develop an efficient algorithm called ILSA for supporting fast on-line query processing. The given query is transformed into a pseudo document vector, and the similarities between query and candidate documents are computed by accumulating the partial similarities obtained from the index nodes corresponds to non-zero entries in the pseudo document vector. Compared to the LSA algorithm, ILSA reduces the time cost of on-line query processing by pruning the candidate documents that are not promising and skipping the operations that make little contribution to similarity scores. Extensive experiments through comparison with LSA have been done, which demonstrate the efficiency and effectiveness of our proposed algorithm. PMID:28520747

An index-based algorithm for fast on-line query processing of latent semantic analysis.

PubMed

Zhang, Mingxi; Li, Pohan; Wang, Wei

2017-01-01

Latent Semantic Analysis (LSA) is widely used for finding the documents whose semantic is similar to the query of keywords. Although LSA yield promising similar results, the existing LSA algorithms involve lots of unnecessary operations in similarity computation and candidate check during on-line query processing, which is expensive in terms of time cost and cannot efficiently response the query request especially when the dataset becomes large. In this paper, we study the efficiency problem of on-line query processing for LSA towards efficiently searching the similar documents to a given query. We rewrite the similarity equation of LSA combined with an intermediate value called partial similarity that is stored in a designed index called partial index. For reducing the searching space, we give an approximate form of similarity equation, and then develop an efficient algorithm for building partial index, which skips the partial similarities lower than a given threshold θ. Based on partial index, we develop an efficient algorithm called ILSA for supporting fast on-line query processing. The given query is transformed into a pseudo document vector, and the similarities between query and candidate documents are computed by accumulating the partial similarities obtained from the index nodes corresponds to non-zero entries in the pseudo document vector. Compared to the LSA algorithm, ILSA reduces the time cost of on-line query processing by pruning the candidate documents that are not promising and skipping the operations that make little contribution to similarity scores. Extensive experiments through comparison with LSA have been done, which demonstrate the efficiency and effectiveness of our proposed algorithm.

Comparison of approaches for mobile document image analysis using server supported smartphones

NASA Astrophysics Data System (ADS)

Ozarslan, Suleyman; Eren, P. Erhan

2014-03-01

With the recent advances in mobile technologies, new capabilities are emerging, such as mobile document image analysis. However, mobile phones are still less powerful than servers, and they have some resource limitations. One approach to overcome these limitations is performing resource-intensive processes of the application on remote servers. In mobile document image analysis, the most resource consuming process is the Optical Character Recognition (OCR) process, which is used to extract text in mobile phone captured images. In this study, our goal is to compare the in-phone and the remote server processing approaches for mobile document image analysis in order to explore their trade-offs. For the inphone approach, all processes required for mobile document image analysis run on the mobile phone. On the other hand, in the remote-server approach, core OCR process runs on the remote server and other processes run on the mobile phone. Results of the experiments show that the remote server approach is considerably faster than the in-phone approach in terms of OCR time, but adds extra delays such as network delay. Since compression and downscaling of images significantly reduce file sizes and extra delays, the remote server approach overall outperforms the in-phone approach in terms of selected speed and correct recognition metrics, if the gain in OCR time compensates for the extra delays. According to the results of the experiments, using the most preferable settings, the remote server approach performs better than the in-phone approach in terms of speed and acceptable correct recognition metrics.

Medical devices; hematology and pathology devices; classification of cord blood processing system and storage container. Final rule.

PubMed

2007-02-01

The Food and Drug Administration (FDA) is classifying a cord blood processing system and storage container into class II (special controls). The special control that will apply to this device is the guidance document entitled "Class II Special Controls Guidance Document: Cord Blood Processing System and Storage Container." FDA is classifying this device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of this device. Elsewhere in this issue of the Federal Register, FDA is announcing the availability of the guidance document that will serve as the special control for this device.

JSC document index

NASA Technical Reports Server (NTRS)

1988-01-01

The Johnson Space Center (JSC) document index is intended to provide a single source listing of all published JSC-numbered documents their authors, and the designated offices of prime responsibility (OPR's) by mail code at the time of publication. The index contains documents which have been received and processed by the JSC Technical Library as of January 13, 1988. Other JSC-numbered documents which are controlled but not available through the JSC Library are also listed.

Laying the Groundwork for Enterprise-Wide Medical Language Processing Services: Architecture and Process

PubMed Central

Chen, Elizabeth S.; Maloney, Francine L.; Shilmayster, Eugene; Goldberg, Howard S.

2009-01-01

A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs. PMID:20351830

Laying the groundwork for enterprise-wide medical language processing services: architecture and process.

PubMed

Chen, Elizabeth S; Maloney, Francine L; Shilmayster, Eugene; Goldberg, Howard S

2009-11-14

A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs.

44 CFR 10.12 - Pre-implementation actions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... integrated into the decision-making process. Because of the diversity of FEMA, it is not feasible to describe..., for integration of environmental considerations into the decision-making process. The Regional... document for the purpose of justifying the decision. Rather it is a concise document that sets forth the...

44 CFR 10.12 - Pre-implementation actions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... integrated into the decision-making process. Because of the diversity of FEMA, it is not feasible to describe..., for integration of environmental considerations into the decision-making process. The Regional... document for the purpose of justifying the decision. Rather it is a concise document that sets forth the...

44 CFR 10.12 - Pre-implementation actions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... integrated into the decision-making process. Because of the diversity of FEMA, it is not feasible to describe..., for integration of environmental considerations into the decision-making process. The Regional... document for the purpose of justifying the decision. Rather it is a concise document that sets forth the...

Illinois Occupational Skill Standards: Chemical Process Technical Operators.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as chemical process technical operators. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process…

Operational Control Procedures for the Activated Sludge Process: Appendix.

ERIC Educational Resources Information Center

West, Alfred W.

This document is the appendix for a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Categories discussed include: control test data, trend charts, moving averages, semi-logarithmic plots, probability…

Study of parameters of the nearest neighbour shared algorithm on clustering documents

NASA Astrophysics Data System (ADS)

Mustika Rukmi, Alvida; Budi Utomo, Daryono; Imro’atus Sholikhah, Neni

2018-03-01

Document clustering is one way of automatically managing documents, extracting of document topics and fastly filtering information. Preprocess of clustering documents processed by textmining consists of: keyword extraction using Rapid Automatic Keyphrase Extraction (RAKE) and making the document as concept vector using Latent Semantic Analysis (LSA). Furthermore, the clustering process is done so that the documents with the similarity of the topic are in the same cluster, based on the preprocesing by textmining performed. Shared Nearest Neighbour (SNN) algorithm is a clustering method based on the number of "nearest neighbors" shared. The parameters in the SNN Algorithm consist of: k nearest neighbor documents, ɛ shared nearest neighbor documents and MinT minimum number of similar documents, which can form a cluster. Characteristics The SNN algorithm is based on shared ‘neighbor’ properties. Each cluster is formed by keywords that are shared by the documents. SNN algorithm allows a cluster can be built more than one keyword, if the value of the frequency of appearing keywords in document is also high. Determination of parameter values on SNN algorithm affects document clustering results. The higher parameter value k, will increase the number of neighbor documents from each document, cause similarity of neighboring documents are lower. The accuracy of each cluster is also low. The higher parameter value ε, caused each document catch only neighbor documents that have a high similarity to build a cluster. It also causes more unclassified documents (noise). The higher the MinT parameter value cause the number of clusters will decrease, since the number of similar documents can not form clusters if less than MinT. Parameter in the SNN Algorithm determine performance of clustering result and the amount of noise (unclustered documents ). The Silhouette coeffisient shows almost the same result in many experiments, above 0.9, which means that SNN algorithm works well with different parameter values.

Evaluation of a System of Electronic Documentation for the Nursing Process

PubMed Central

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2012-01-01

The objective of this study is to evaluate the functional performance and the technical quality of an electronic documentation system designed to document the data of the Nursing Process. The Model of Quality will be the one established by the ISO/IEC 25010. Such research will allow the spreading of the knowledge of an emerging area, thus adding a further initiative to the growing efforts made in the information technology area for health and nursing. PMID:24199110

Cold Vacuum Drying facility civil structural system design description (SYS 06)

DOE Office of Scientific and Technical Information (OSTI.GOV)

PITKOFF, C.C.

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

Preliminary application of Structure from Motion and GIS to document decomposition and taphonomic processes.

PubMed

Carlton, Connor D; Mitchell, Samantha; Lewis, Patrick

2018-01-01

Over the past decade, Structure from Motion (SfM) has increasingly been used as a means of digital preservation and for documenting archaeological excavations, architecture, and cultural material. However, few studies have tapped the potential of using SfM to document and analyze taphonomic processes affecting burials for forensic sciences purposes. This project utilizes SfM models to elucidate specific post-depositional events that affected a series of three human cadavers deposited at the South East Texas Applied Forensic Science Facility (STAFS). The aim of this research was to test the ability for untrained researchers to employ spatial software and photogrammetry for data collection purposes. For a series of three months a single lens reflex (SLR) camera was used to capture a series of overlapping images at periodic stages in the decomposition process of each cadaver. These images are processed through photogrammetric software that creates a 3D model that can be measured, manipulated, and viewed. This project used photogrammetric and geospatial software to map changes in decomposition and movement of the body from original deposition points. Project results indicate SfM and GIS as a useful tool for documenting decomposition and taphonomic processes. Results indicate photogrammetry is an efficient, relatively simple, and affordable tool for the documentation of decomposition. Copyright © 2017 Elsevier B.V. All rights reserved.

Defining Uniform Processes for Remediation, Probation and Termination in Residency Training.

PubMed

Smith, Jessica L; Lypson, Monica; Silverberg, Mark; Weizberg, Moshe; Murano, Tiffany; Lukela, Michael; Santen, Sally A

2017-01-01

It is important that residency programs identify trainees who progress appropriately, as well as identify residents who fail to achieve educational milestones as expected so they may be remediated. The process of remediation varies greatly across training programs, due in part to the lack of standardized definitions for good standing, remediation, probation, and termination . The purpose of this educational advancement is to propose a clear remediation framework including definitions, management processes, documentation expectations and appropriate notifications. Informal remediation is initiated when a resident's performance is deficient in one or more of the outcomes-based milestones established by the Accreditation Council for Graduate Medical Education, but not significant enough to trigger formal remediation. Formal remediation occurs when deficiencies are significant enough to warrant formal documentation because informal remediation failed or because issues are substantial. The process includes documentation in the resident's file and notification of the graduate medical education office; however, the documentation is not disclosed if the resident successfully remediates. Probation is initiated when a resident is unsuccessful in meeting the terms of formal remediation or if initial problems are significant enough to warrant immediate probation. The process is similar to formal remediation but also includes documentation extending to the final verification of training and employment letters. Termination involves other stakeholders and occurs when a resident is unsuccessful in meeting the terms of probation or if initial problems are significant enough to warrant immediate termination.

Accidental Government Documents Librarian: A Review of Experiences and Training Needs of Interim Documents Librarians

ERIC Educational Resources Information Center

Yelinek, Kathryn; Hinchcliff, Marilou

2009-01-01

The results of a survey to determine the training needs and normative experiences of temporary government documents librarians are presented. The results indicate that temporary librarians tend to work in academia, have been in librarianship for a shorter time period, and have fewer technical processing skills than permanent documents librarians.…

Phase II Report: Design Study for Automated Document Location and Control System.

ERIC Educational Resources Information Center

Booz, Allen Applied Research, Inc., Bethesda, MD.

The scope of Phase II is the design of a system for document control within the National Agricultural Library (NAL) that will facilitate the processing of the documents selected, ordered, or received; that will avoid backlogs; and that will provide rapid document location reports. The results are set forth as follows: Chapter I, Introduction,…

Procedures and Policies Manual

ERIC Educational Resources Information Center

Davis, Jane M.

2006-01-01

This document was developed by the Middle Tennessee State University James E. Walker Library Collection Management Department to provide policies and procedural guidelines for the cataloging and processing of bibliographic materials. This document includes policies for cataloging monographs, serials, government documents, machine-readable data…

Natural Language Processing-Enabled and Conventional Data Capture Methods for Input to Electronic Health Records: A Comparative Usability Study.

PubMed

Kaufman, David R; Sheehan, Barbara; Stetson, Peter; Bhatt, Ashish R; Field, Adele I; Patel, Chirag; Maisel, James Mark

2016-10-28

The process of documentation in electronic health records (EHRs) is known to be time consuming, inefficient, and cumbersome. The use of dictation coupled with manual transcription has become an increasingly common practice. In recent years, natural language processing (NLP)-enabled data capture has become a viable alternative for data entry. It enables the clinician to maintain control of the process and potentially reduce the documentation burden. The question remains how this NLP-enabled workflow will impact EHR usability and whether it can meet the structured data and other EHR requirements while enhancing the user's experience. The objective of this study is evaluate the comparative effectiveness of an NLP-enabled data capture method using dictation and data extraction from transcribed documents (NLP Entry) in terms of documentation time, documentation quality, and usability versus standard EHR keyboard-and-mouse data entry. This formative study investigated the results of using 4 combinations of NLP Entry and Standard Entry methods ("protocols") of EHR data capture. We compared a novel dictation-based protocol using MediSapien NLP (NLP-NLP) for structured data capture against a standard structured data capture protocol (Standard-Standard) as well as 2 novel hybrid protocols (NLP-Standard and Standard-NLP). The 31 participants included neurologists, cardiologists, and nephrologists. Participants generated 4 consultation or admission notes using 4 documentation protocols. We recorded the time on task, documentation quality (using the Physician Documentation Quality Instrument, PDQI-9), and usability of the documentation processes. A total of 118 notes were documented across the 3 subject areas. The NLP-NLP protocol required a median of 5.2 minutes per cardiology note, 7.3 minutes per nephrology note, and 8.5 minutes per neurology note compared with 16.9, 20.7, and 21.2 minutes, respectively, using the Standard-Standard protocol and 13.8, 21.3, and 18.7 minutes using the Standard-NLP protocol (1 of 2 hybrid methods). Using 8 out of 9 characteristics measured by the PDQI-9 instrument, the NLP-NLP protocol received a median quality score sum of 24.5; the Standard-Standard protocol received a median sum of 29; and the Standard-NLP protocol received a median sum of 29.5. The mean total score of the usability measure was 36.7 when the participants used the NLP-NLP protocol compared with 30.3 when they used the Standard-Standard protocol. In this study, the feasibility of an approach to EHR data capture involving the application of NLP to transcribed dictation was demonstrated. This novel dictation-based approach has the potential to reduce the time required for documentation and improve usability while maintaining documentation quality. Future research will evaluate the NLP-based EHR data capture approach in a clinical setting. It is reasonable to assert that EHRs will increasingly use NLP-enabled data entry tools such as MediSapien NLP because they hold promise for enhancing the documentation process and end-user experience. ©David R. Kaufman, Barbara Sheehan, Peter Stetson, Ashish R. Bhatt, Adele I. Field, Chirag Patel, James Mark Maisel. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 28.10.2016.

7 CFR 372.9 - Processing and use of environmental documents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Processing and use of environmental documents. 372.9 Section 372.9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES § 372...

7 CFR 372.9 - Processing and use of environmental documents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Processing and use of environmental documents. 372.9 Section 372.9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES § 372...

7 CFR 372.9 - Processing and use of environmental documents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false Processing and use of environmental documents. 372.9 Section 372.9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES § 372...

Laboratory Biosafety and Biosecurity Risk Assessment Technical Guidance Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Astuto-Gribble, Lisa M; Caskey, Susan Adele

2014-07-01

The purpose of this document is threefold: 1) to describe the laboratory bio safety and biosecurity risk assessment process and its conceptual framework; 2) provide detailed guidance and suggested methodologies on how to conduct a risk assessment; and 3) present some practical risk assessment process strategies using realistic laboratory scenarios.

BASIC Language Flow Charting Program (BASCHART). Technical Note 3-82.

ERIC Educational Resources Information Center

Johnson, Charles C.; And Others

This document describes BASCHART, a computer aid designed to decipher and automatically flow chart computer program logic; it also provides the computer code necessary for this process. Developed to reduce the labor intensive manual process of producing a flow chart for an undocumented or inadequately documented program, BASCHART will…

48 CFR 801.602-79 - Processing solicitations and contract documents for legal or technical review-Veterans Benefits...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Processing solicitations and contract documents for legal or technical review-Veterans Benefits Administration. 801.602-79 Section 801.602-79 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL...

Operational Control Procedures for the Activated Sludge Process, Part III-A: Calculation Procedures.

ERIC Educational Resources Information Center

West, Alfred W.

This is the second in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. This document deals exclusively with the calculation procedures, including simplified mixing formulas, aeration tank…

System-Inspection Guidelines for Minnesota PK-12 School Construction Projects.

ERIC Educational Resources Information Center

Minnesota State Dept. of Children, Families, and Learning, St. Paul.

This document describes a 1998 commissioning statute passed by the Minnesota legislature requiring that mechanical HVAC systems undergo an inspection process to uncover and rectify problems before or shortly after a school building is occupied. The document presents the statute, describes the commissioning/system-inspection process and optional…

The Effects of Structured Health Policy Education on Connecticut Registered Nurses' Clinical Documentation

ERIC Educational Resources Information Center

Lobo, Rosale Constance

2017-01-01

Registered Nurses use clinical documentation to describe care planning processes, measure quality outcomes, support reimbursement, and defend litigation. The Connecticut Department of Health, guided by federal Conditions of Participation, defines state-level healthcare policy to include required care planning processes. Nurses are educated in care…

Offshore Wind Guidance Document: Oceanography and Sediment Stability (Version 1) Development of a Conceptual Site Model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Jason Magalen; Craig Jones

This guidance document provide s the reader with an overview of the key environmental considerations for a typical offshore wind coastal location and the tools to help guide the reader through a thoro ugh planning process. It will enable readers to identify the key coastal processes relevant to their offshore wind site and perform pertinent analysis to guide siting and layout design, with the goal of minimizing costs associated with planning, permitting , and long - ter m maintenance. The document highlight s site characterization and assessment techniques for evaluating spatial patterns of sediment dynamics in the vicinity of amore » wind farm under typical, extreme, and storm conditions. Finally, the document des cribe s the assimilation of all of this information into the conceptual site model (CSM) to aid the decision - making processes.« less

Inferring Group Processes from Computer-Mediated Affective Text Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schryver, Jack C; Begoli, Edmon; Jose, Ajith

2011-02-01

Political communications in the form of unstructured text convey rich connotative meaning that can reveal underlying group social processes. Previous research has focused on sentiment analysis at the document level, but we extend this analysis to sub-document levels through a detailed analysis of affective relationships between entities extracted from a document. Instead of pure sentiment analysis, which is just positive or negative, we explore nuances of affective meaning in 22 affect categories. Our affect propagation algorithm automatically calculates and displays extracted affective relationships among entities in graphical form in our prototype (TEAMSTER), starting with seed lists of affect terms. Severalmore » useful metrics are defined to infer underlying group processes by aggregating affective relationships discovered in a text. Our approach has been validated with annotated documents from the MPQA corpus, achieving a performance gain of 74% over comparable random guessers.« less

High-Quality 3d Models and Their Use in a Cultural Heritage Conservation Project

NASA Astrophysics Data System (ADS)

Tucci, G.; Bonora, V.; Conti, A.; Fiorini, L.

2017-08-01

Cultural heritage digitization and 3D modelling processes are mainly based on laser scanning and digital photogrammetry techniques to produce complete, detailed and photorealistic three-dimensional surveys: geometric as well as chromatic aspects, in turn testimony of materials, work techniques, state of preservation, etc., are documented using digitization processes. The paper explores the topic of 3D documentation for conservation purposes; it analyses how geomatics contributes in different steps of a restoration process and it presents an overview of different uses of 3D models for the conservation and enhancement of the cultural heritage. The paper reports on the project to digitize the earthenware frieze of the Ospedale del Ceppo in Pistoia (Italy) for 3D documentation, restoration work support, and digital and physical reconstruction and integration purposes. The intent to design an exhibition area suggests new ways to take advantage of 3D data originally acquired for documentation and scientific purposes.

Information Retrieval: A Sequential Learning Process.

ERIC Educational Resources Information Center

Bookstein, Abraham

1983-01-01

Presents decision-theoretic models which intrinsically include retrieval of multiple documents whereby system responds to request by presenting documents to patron in sequence, gathering feedback, and using information to modify future retrievals. Document independence model, set retrieval model, sequential retrieval model, learning model,…

8 CFR 223.2 - Processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS REENTRY PERMITS, REFUGEE TRAVEL DOCUMENTS..., refugee travel document, or advance parole document must be filed on Form I-131, with the fee required in... resident or conditional permanent resident. (2) Refugee travel document—(i) General. Except as otherwise...

Electronic Document Supply Systems.

ERIC Educational Resources Information Center

Cawkell, A. E.

1991-01-01

Describes electronic document delivery systems used by libraries and document image processing systems used for business purposes. Topics discussed include technical specifications; analogue read-only laser videodiscs; compact discs and CD-ROM; WORM; facsimile; ADONIS (Article Delivery over Network Information System); DOCDEL; and systems at the…

ISS Crew Transportation and Services Requirements Document

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L. (Compiler)

2015-01-01

Under the guidance of processes provided by Crew Transportation Plan (CCT-PLN-1100), this document with its sister documents, Crew Transportation Technical Management Processes (CCT-PLN-1120), Crew Transportation Technical Standards and Design Evaluation Criteria (CCT-STD-1140), and Crew Transportation Operations Standards (CCT-STD-1150), and International Space Station (ISS) to Commercial Orbital Transportation Services Interface Requirements Document (SSP 50808), provides the basis for a National Aeronautics and Space Administration (NASA) certification for services to the ISS for the Commercial Provider. When NASA Crew Transportation System (CTS) certification is achieved for ISS transportation, the Commercial Provider will be eligible to provide services to and from the ISS during the services phase of the NASA Commercial Crew Program (CCP).

10 CFR 1045.42 - Mandatory and Freedom of Information Act reviews for declassification of restricted data and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... documents. (a) General. (1) Agencies with documents containing RD and FRD shall respond to mandatory review... nonexistence is itself classified as RD or FRD. (b) Processing Requests. (1) Agencies shall forward documents containing RD to DOE for review. (2) Agencies shall forward documents containing FRD to the DOE or to the DoD...

10 CFR 1045.42 - Mandatory and Freedom of Information Act reviews for declassification of restricted data and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... documents. (a) General. (1) Agencies with documents containing RD and FRD shall respond to mandatory review... nonexistence is itself classified as RD or FRD. (b) Processing Requests. (1) Agencies shall forward documents containing RD to DOE for review. (2) Agencies shall forward documents containing FRD to the DOE or to the DoD...

10 CFR 1045.42 - Mandatory and Freedom of Information Act reviews for declassification of restricted data and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... documents. (a) General. (1) Agencies with documents containing RD and FRD shall respond to mandatory review... nonexistence is itself classified as RD or FRD. (b) Processing Requests. (1) Agencies shall forward documents containing RD to DOE for review. (2) Agencies shall forward documents containing FRD to the DOE or to the DoD...

10 CFR 1045.42 - Mandatory and Freedom of Information Act reviews for declassification of restricted data and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... documents. (a) General. (1) Agencies with documents containing RD and FRD shall respond to mandatory review... nonexistence is itself classified as RD or FRD. (b) Processing Requests. (1) Agencies shall forward documents containing RD to DOE for review. (2) Agencies shall forward documents containing FRD to the DOE or to the DoD...

On Training in Language Documentation and Capacity Building in Papua New Guinea: A Response to Bird et al.

ERIC Educational Resources Information Center

Brooks, Joseph D.

2015-01-01

In a recent article, Bird et al. (2013) discuss a workshop held at the University of Goroka in Papua New Guinea (PNG) in 2012. The workshop was intended to offer a new methodological framework for language documentation and capacity building that streamlines the documentation process and accelerates the global effort to document endangered…

Engaging staff to improve quality and safety in an austere medical environment: a case-control study in two Sierra Leonean hospitals.

PubMed

Rosen, Michael A; Chima, Adaora M; Sampson, John B; Jackson, Eric V; Koka, Rahul; Marx, Megan K; Kamara, Thaim B; Ogbuagu, Onyebuchi U; Lee, Benjamin H

2015-08-01

Inadequate observance of basic processes in patient care such as patient monitoring and documentation practices are potential impediments to the timely diagnoses and management of patients. These gaps exist in low resource settings such as Sierra Leone and can be attributed to a myriad of factors such as workforce and technology deficiencies. In the study site, only 12.4% of four critical vital signs were documented in the pre-intervention period. Implement a failure mode and effects analysis (FMEA) to improve documentation of four patient vital signs: temperature, blood pressure, pulse rate and respiratory rate. FMEA was implemented among a subpopulation of health workers who are involved in monitoring and documenting patient vital signs. Pre- and post-FMEA monitoring and documentation practice were compared with a control site. Participants identified a four-step process to monitoring and documenting vital signs, three categories of failure modes and four potential solutions. Based on 2100 patient days of documentation compliance data from 147 patients between July and November 2012, staff members at the study site were 1.79 times more likely to document all four patient vital signs in the post-implementation period (95% CI [1.35, 2.38]). FMEA is a feasible and effective strategy for improving quality and safety in an austere medical environment. Documentation compliance improved at the intervention facility. To evaluate the scalability and sustainability of this approach, programs targeting the development of these types of process improvement skills in local staff should be evaluated. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Mental Status Documentation: Information Quality and Data Processes

PubMed Central

Weir, Charlene; Gibson, Bryan; Taft, Teresa; Slager, Stacey; Lewis, Lacey; Staggers, Nancy

2016-01-01

Delirium is a fluctuating disturbance of cognition and/or consciousness associated with poor outcomes. Caring for patients with delirium requires integration of disparate information across clinicians, settings and time. The goal of this project was to characterize the information processes involved in nurses’ assessment, documentation, decisionmaking and communication regarding patients’ mental status in the inpatient setting. VA nurse managers of medical wards (n=18) were systematically selected across the US. A semi-structured telephone interview focused on current assessment, documentation, and communication processes, as well as clinical and administrative decision-making was conducted, audio-recorded and transcribed. A thematic analytic approach was used. Five themes emerged: 1) Fuzzy Concepts, 2) Grey Data, 3) Process Variability 4) Context is Critical and 5) Goal Conflict. This project describes the vague and variable information processes related to delirium and mental status that undermine effective risk, prevention, identification, communication and mitigation of harm. PMID:28269919

Mental Status Documentation: Information Quality and Data Processes.

PubMed

Weir, Charlene; Gibson, Bryan; Taft, Teresa; Slager, Stacey; Lewis, Lacey; Staggers, Nancy

2016-01-01

Delirium is a fluctuating disturbance of cognition and/or consciousness associated with poor outcomes. Caring for patients with delirium requires integration of disparate information across clinicians, settings and time. The goal of this project was to characterize the information processes involved in nurses' assessment, documentation, decisionmaking and communication regarding patients' mental status in the inpatient setting. VA nurse managers of medical wards (n=18) were systematically selected across the US. A semi-structured telephone interview focused on current assessment, documentation, and communication processes, as well as clinical and administrative decision-making was conducted, audio-recorded and transcribed. A thematic analytic approach was used. Five themes emerged: 1) Fuzzy Concepts, 2) Grey Data, 3) Process Variability 4) Context is Critical and 5) Goal Conflict. This project describes the vague and variable information processes related to delirium and mental status that undermine effective risk, prevention, identification, communication and mitigation of harm.

NASAwide electronic publishing system: Prototype STI electronic document distribution, stage-4 evaluation report

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Collins, Mary; Caswell, Pamela; Haynes, Bob; Nelson, Michael L.; Holm, Jeanne; Buquo, Lynn; Tingle, Annette; Cooper, Bill; Stiltner, Roy

1996-01-01

This evaluation report contains an introduction, seven chapters, and five appendices. The Introduction describes the purpose, conceptual frame work, functional description, and technical report server of the STI Electronic Document Distribution (EDD) project. Chapter 1 documents the results of the prototype STI EDD in actual operation. Chapter 2 documents each NASA center's post processing publication processes. Chapter 3 documents each center's STI software, hardware, and communications configurations. Chapter 7 documents STI EDD policy, practices, and procedures. The appendices, which arc contained in Part 2 of this document, consist of (1) STI EDD Project Plan, (2) Team members, (3) Phasing Schedules, (4) Accessing On-line Reports, and (5) Creating an HTML File and Setting Up an xTRS. In summary, Stage 4 of the NASAwide Electronic Publishing System is the final phase of its implementation through the prototyping and gradual integration of each NASA center's electronic printing systems, desktop publishing systems, and technical report servers to be able to provide to NASA's engineers, researchers, scientists, and external users the widest practicable and appropriate dissemination of information concerning its activities and the result thereof to their work stations.

Research subject privacy protection in otolaryngology.

PubMed

Noone, Michael C; Walters, K Christian; Gillespie, M Boyd

2004-03-01

Health Insurance Portability and Accountability Act regulations, which took effect on April 14, 2003, placed new constraints on the use of protected health information for research purposes. To review practices of research subject privacy protection in otolaryngology in order to determine steps necessary to achieve compliance with Health Insurance Portability and Accountability Act regulations. Literature review. Articles appearing in 2001 in 3 widely circulated otolaryngology journals were classified according to study design. The "Methods" section of each article was reviewed to determine whether the informed consent and institutional review board processes were clearly documented. Descriptive studies involving case reports and case series were more common than observational studies that include a control group (66% vs 11%). Few case series documented the consent process (18%) and institutional review board process (19%). Observational designs demonstrated better documentation of the consent process (P<.001) and the institutional review board exemption and approval process (P<.001). Methods used to protect subject privacy are not commonly documented in case series in otolaryngology. More attention needs to be given to research subject privacy concerns in the otolaryngology literature in order to comply with Health Insurance Portability and Accountability Act regulations.

A Japanese New Altimetry Mission, COMPIRA - Towards High Temporal and Spatial Sampling of Sea Surface Height Measurement

NASA Astrophysics Data System (ADS)

Ito, N.; Uematsu, A.; Yajima, Y.; Isoguchi, O.

2014-12-01

Japan Aerospace Exploration Agency (JAXA) is working on a conceptual study of altimeter mission named Coastal and Ocean measurement Mission with Precise and Innovative Radar Altimeter (COMPIRA), which will carry a wide-swath altimeter named Synthetic aperture radar (SAR) Height Imaging Oceanic Sensor with Advanced Interferometry (SHIOSAI). Capturing meso/submeso-scale phenomena is one of important objectives of the COMPIRA mission, as well as operational oceanography and fishery. For operational oceanography including coastal forecast, swath of SHIOSAI is selected to be 80 km in left and right sides to maximize temporal and spatial sampling of the sea surface height. Orbit specifications are also designed to be better sampling especially for mid-latitude region. That is, a spatial grid sampling is 5 km and an observation times per revisit period (about 10 days) is 2 to 3 times. In order to meet both sampling frequency and spatial coverage requirements as much as possible, orbit inclination was set relatively low, 51 degrees. Although this sampling frequency is, of course, not enough high to capture time evolution of coastal phenomena, an assimilation process would compensate its time evolution if 2D SSH fields was observed at least once within decal time scale of phenomena. JAXA has launched a framework called "Coastal forecast core team" to aim at developing coastal forecast system through pre-launch activities toward COMPIRA. Assimilation segment as well as satellite and in situ data provision will play an important role on these activities. As a first step, we evaluated effects of ocean current forecast improvement with COMPIRA-simulated wide-swath and high sampling sea surface heights (SSH) data. Simulated SSH data are generated from regional ocean numerical models and the COMPIRA orbit and error specifications. Then, identical twin experiments are conducted to investigate the effect of wide-swath SSH measurements on coastal forecast in the Tohoku Pacific coast region. The experiment shows that simulated sea surface current using COMPIRA data as an input data for assimilation well represents vortical feature, which cannot be reproduced by conventional nadir altimeters.

Environmental Controls and Eco-geomorphic Interactions of the Barchan-to-parabolic Dune Stabilisation and the Parabolic-to-barchan Dune Reactivation

NASA Astrophysics Data System (ADS)

Yan, Na; Baas, Andreas

2015-04-01

Parabolic dunes are one of a few common aeolian landforms which are highly controlled by eco-geomorphic interactions. Parabolic dunes, on the one hand, can be developed from highly mobile dune landforms, barchans for instance, in an ameliorated vegetation condition; or on the other hand, they can be reactivated and transformed back into mobile dunes due to vegetation deterioration. The fundamental mechanisms and eco-geomorphic interactions controlling both dune transformations remain poorly understood. To bridge the gap between complex processes involved in dune transformations on a relatively long temporal scale and real world monitoring records on a very limited temporal scale, this research has extended the DECAL model to incorporate 'dynamic' growth functions and the different 'growth' of perennial shrubs between growing and non-growing seasons, informed by field measurements and remote sensing analysis, to explore environmental controls and eco-geomorphic interactions of both types of dune transformation. A non-dimensional 'dune stabilising index' is proposed to capture the interactions between environmental controls (i.e. the capabilities of vegetation to withstand wind erosion and sand burial, the sandy substratum thickness, the height of the initial dune, and the sand transport potential), and establish the linkage between these controls and the geometry of a stabilising dune. An example demonstrates how to use the power-law relationship between the dune stabilising index and the normalised migration distance to assist in extrapolating the historical trajectories of transforming dunes. The modelling results also show that a slight increase in vegetation cover of an initial parabolic dune can significantly increase the reactivation threshold of climatic impact (both drought stress and wind strength) required to reactivate a stabilising parabolic dune into a barchan. Four eco-geomorphic interaction zones that govern a barchan-to-parabolic dune transformation and a parabolic-to-barchan dune transformation have been identified. These zones exhibit different characteristics and dynamics that are sensitive to changes in environmental forces, and can be potentially used as a proxy to monitor the mobility of a dune system.

ERIC Processing Manual. Rules and Guidelines for the Acquisition, Selection, and Technical Processing of Documents and Journal Articles by the Various Components of the ERIC Network.

ERIC Educational Resources Information Center

Brandhorst, Ted, Ed.; And Others

This loose-leaf manual provides the detailed rules, guidelines, and examples to be used by the components of the Educational Resources Information Center (ERIC) Network in acquiring and selecting documents and in processing them (i.e., cataloging, indexing, abstracting) for input to the ERIC computer system and subsequent announcement in…

The revised APTA code of ethics for the physical therapist and standards of ethical conduct for the physical therapist assistant: theory, purpose, process, and significance.

PubMed

Swisher, Laura Lee; Hiller, Peggy

2010-05-01

In June 2009, the House of Delegates (HOD) of the American Physical Therapy Association (APTA) passed a major revision of the APTA Code of Ethics for physical therapists and the Standards of Ethical Conduct for the Physical Therapist Assistant. The revised documents will be effective July 1, 2010. The purposes of this article are: (1) to provide a historical, professional, and theoretical context for this important revision; (2) to describe the 4-year revision process; (3) to examine major features of the documents; and (4) to discuss the significance of the revisions from the perspective of the maturation of physical therapy as a doctoring profession. PROCESS OF REVISION: The process for revision is delineated within the context of history and the Bylaws of APTA. FORMAT, STRUCTURE, AND CONTENT OF REVISED CORE ETHICS DOCUMENTS: The revised documents represent a significant change in format, level of detail, and scope of application. Previous APTA Codes of Ethics and Standards of Ethical Conduct for the Physical Therapist Assistant have delineated very broad general principles, with specific obligations spelled out in the Ethics and Judicial Committee's Guide for Professional Conduct and Guide for Conduct of the Physical Therapist Assistant. In contrast to the current documents, the revised documents address all 5 roles of the physical therapist, delineate ethical obligations in organizational and business contexts, and align with the tenets of Vision 2020. The significance of this revision is discussed within historical parameters, the implications for physical therapists and physical therapist assistants, the maturation of the profession, societal accountability and moral community, potential regulatory implications, and the inclusive and deliberative process of moral dialogue by which changes were developed, revised, and approved.

Development of Souvenir Production Transaction Processing System

NASA Astrophysics Data System (ADS)

Rumambi, H.; Kaparang, R.; Lintong, J.

2018-01-01

This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

Transforming the back office with a single keystroke.

PubMed

Kaplan, Charles

2011-09-01

Intelligent data capture is an application that can provide electronic access to data contained in any type of document, including clinical records and financial documents, thereby reducing or eliminating the need for manual data entry. Before implementing this technology, however, healthcare leaders should: Evaluate technology in the context of a business case to ensure a measurable ROI. Communicate with employees throughout the process so they are prepared for and embrace the inevitable changes that will come with automation. Implement the solution in phases, focusing on those document types that can deliver for a safer, less disruptive approach. Achieve maximum benefit to the organization by reengineering business processes to fully leverage technology rather than simply automating existing manual processes.

The potential of artificial aging for modelling of natural aging processes of ballpoint ink.

PubMed

Weyermann, Céline; Spengler, Bernhard

2008-08-25

Artificial aging has been used to reproduce natural aging processes in an accelerated pace. Questioned documents were exposed to light or high temperature in a well-defined manner in order to simulate an increased age. This may be used to study the aging processes or to date documents by reproducing their aging curve. Ink was studied especially because it is deposited on the paper when a document, such as a contract, is produced. Once on the paper, aging processes start through degradation of dyes, solvents drying and resins polymerisation. Modelling of dye's and solvent's aging was attempted. These processes, however, follow complex pathways, influenced by many factors which can be classified as three major groups: ink composition, paper type and storage conditions. The influence of these factors is such that different aging states can be obtained for an identical point in time. Storage conditions in particular are difficult to simulate, as they are dependent on environmental conditions (e.g. intensity and dose of light, temperature, air flow, humidity) and cannot be controlled in the natural aging of questioned documents. The problem therefore lies more in the variety of different conditions a questioned document might be exposed to during its natural aging, rather than in the simulation of such conditions in the laboratory. Nevertheless, a precise modelling of natural aging curves based on artificial aging curves is obtained when performed on the same paper and ink. A standard model for aging processes of ink on paper is therefore presented that is based on a fit of aging curves to a power law of solvent concentrations as a function of time. A mathematical transformation of artificial aging curves into modelled natural aging curves results in excellent overlap with data from real natural aging processes.

Biotea: RDFizing PubMed Central in support for the paper as an interface to the Web of Data

PubMed Central

2013-01-01

Background The World Wide Web has become a dissemination platform for scientific and non-scientific publications. However, most of the information remains locked up in discrete documents that are not always interconnected or machine-readable. The connectivity tissue provided by RDF technology has not yet been widely used to support the generation of self-describing, machine-readable documents. Results In this paper, we present our approach to the generation of self-describing machine-readable scholarly documents. We understand the scientific document as an entry point and interface to the Web of Data. We have semantically processed the full-text, open-access subset of PubMed Central. Our RDF model and resulting dataset make extensive use of existing ontologies and semantic enrichment services. We expose our model, services, prototype, and datasets at http://biotea.idiginfo.org/ Conclusions The semantic processing of biomedical literature presented in this paper embeds documents within the Web of Data and facilitates the execution of concept-based queries against the entire digital library. Our approach delivers a flexible and adaptable set of tools for metadata enrichment and semantic processing of biomedical documents. Our model delivers a semantically rich and highly interconnected dataset with self-describing content so that software can make effective use of it. PMID:23734622

Operating Permits Program Review Process

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Consideration of Fugitive Emissions at Oilseed Processing Plants

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

ICESat (GLAS) Science Processing Software Document Series. Volume 3; GLAS Science Software Requirements Document; Ver 2.1

NASA Technical Reports Server (NTRS)

Jester, Peggy L.; Lee, Jeffrey; Zukor, Dorothy J. (Technical Monitor)

2001-01-01

This document addresses the software requirements of the Geoscience Laser Altimeter System (GLAS) Standard Data Software (SDS) supporting the GLAS instrument on the EOS ICESat Spacecraft. This Software Requirements Document represents the initial collection of the technical engineering information for the GLAS SDS. This information is detailed within the second of four main volumes of the Standard documentation, the Product Specification volume. This document is a "roll-out" from the governing volume outline containing the Concept and Requirements sections.

To Image...or Not to Image?

ERIC Educational Resources Information Center

Bruley, Karina

1996-01-01

Provides a checklist of considerations for installing document image processing with an electronic document management system. Other topics include scanning; indexing; the image file life cycle; benefits of imaging; document-driven workflow; and planning for workplace changes like postsorting, creating a scanning room, redeveloping job tasks and…

20 CFR 405.333 - Submitting documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... digits of the claimant's social security number. All such documents must be clear and legible to the... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Submitting documents. 405.333 Section 405.333 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL...

Memory Efficient Ranking.

ERIC Educational Resources Information Center

Moffat, Alistair; And Others

1994-01-01

Describes an approximate document ranking process that uses a compact array of in-memory, low-precision approximations for document length. Combined with another rule for reducing the memory required by partial similarity accumulators, the approximation heuristic allows the ranking of large document collections using less than one byte of memory…

Guideline for Software Documentation Management.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

Designed as a basic reference for federal personnel concerned with the development, maintenance, enhancement, control, and management of computer-based systems, this manual provides a general overview of the software development process and software documentation issues so that managers can assess their own documentation requirements. Reference is…

A Systematic Process to Facilitate Evidence-Informed Decisionmaking Regarding Program Expansion. The RAND Toolkit, Volume 3

DTIC Science & Technology

2014-01-01

provided for non - commercial use only. Unauthorized posting of RAND electronic documents to a non -RAND website is prohibited. RAND electronic documents...documents to a non -RAND website is prohibited. RAND documents are protected under copyright law. Permission is given to duplicate this document for...the DoD-wide decisionmaking board to focus their review efforts on larger programs or those that function in multiple branches of service, as well as

7 CFR 3575.52 - Processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable); (iii) Supporting documentation necessary to make an eligibility determination such as financial statements, audits, copies of organizational documents, existing debt instruments, etc.; and (iv...

Deadwood Community Center and Firehall, Deadwood, Oregon. Phase I. Design documentation report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, G. Z.; Kellett, R.; Reynolds, J. S.

1980-01-01

The energy related portions of an architectural design process for a passive solar heating system that directly incorporated the needs, values, and aspirations of the people who will construct and use the buildings are described. The design process and the documentation and evaluation of the final design are presented. (MHR)

A Survey of Selected Document Processing Systems.

ERIC Educational Resources Information Center

Fong, Elizabeth

In addition to reviewing the characteristics of document processing systems, this paper pays considerable attention to the description of a system via a feature list approach. The purpose of this report is to present features of the systems in parallel fashion to facilitate comparison so that a potential user may have a basis for evaluation in…

48 CFR 801.602-77 - Processing solicitations and contract documents for legal or technical review-general.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Processing solicitations and contract documents for legal or technical review-general. 801.602-77 Section 801.602-77 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS...

Winning performance improvement strategies--linking documentation and accounts receivable.

PubMed

Braden, J H; Swadley, D

1996-01-01

When the HIM department at The University of Texas Medical Branch set out to improve documentation and accounts receivable management, it established a plan that encompassed a broad spectrum of data management process changes. The department examined and acknowledged the deficiencies in data management processes and used performance improvement tools to achieve successful results.

A User-Centered View of Document Delivery and Interlibrary Loan.

ERIC Educational Resources Information Center

Martin, Harry S., III; Kendrick, Curtis L.

1994-01-01

Discusses reasons why libraries are being forced to seek new forms of information storage. A hypothetical scenario of user-initiated document delivery alternatives integrated with a search process used by a professor using the Harvard OnLine Library Information System is presented. Extensive notes elaborate on the process and the technology…

77 FR 67340 - National Fire Codes: Request for Comments on NFPA's Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... the process. The Code Revision Process contains four basic steps that are followed for developing new documents as well as revising existing documents. Step 1: Public Input Stage, which results in the First Draft Report (formerly ROP); Step 2: Comment Stage, which results in the Second Draft Report (formerly...

20 CFR 10.13 - What process is used by a person who wants to correct FECA-related documents?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false What process is used by a person who wants to correct FECA-related documents? 10.13 Section 10.13 Employees' Benefits OFFICE OF WORKERS' COMPENSATION... to OWCP for review and decision. Rights and Penalties ...

Gaia DR2 documentation Chapter 6: Spectroscopy

NASA Astrophysics Data System (ADS)

Sartoretti, P.; Blomme, R.; David, M.; Seabroke, G.

2018-04-01

This chapter of the Gaia DR2 documentation describes the processing and validation of the Radial Velocity Spectrometer (RVS) data. A more detailed description of the processing is provided in Sartoretti et al. (2018) and of the validation in Katz et al. (2018). A description of the RVS instrument is provided in Cropper et al. (2018).

High Performance Sustainable School Design: Roy Lee Walker Elementary, McKinney, Texas.

ERIC Educational Resources Information Center

SHW Group, Inc., Dallas, TX.

This document describes the sustainable features of the Roy Lee Walker Elementary School (Texas), a prototype "Eco Education" school that blends the physical environment with the student learning process while protecting the site. The document also presents the process of integrating sustainability criteria in all phases of the school's…

6 CFR 37.13 - Document verification requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... required under § 37.11 with the issuer of the document. States shall use systems for electronic validation... process is not warranted in the situation, the DMV must not issue a REAL ID driver's license or... authentic upon inspection or the data does not match and the use of an exceptions process is not warranted...

6 CFR 37.13 - Document verification requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... required under § 37.11 with the issuer of the document. States shall use systems for electronic validation... process is not warranted in the situation, the DMV must not issue a REAL ID driver's license or... authentic upon inspection or the data does not match and the use of an exceptions process is not warranted...

Quantity and unit extraction for scientific and technical intelligence analysis

NASA Astrophysics Data System (ADS)

David, Peter; Hawes, Timothy

2017-05-01

Scientific and Technical (S and T) intelligence analysts consume huge amounts of data to understand how scientific progress and engineering efforts affect current and future military capabilities. One of the most important types of information S and T analysts exploit is the quantities discussed in their source material. Frequencies, ranges, size, weight, power, and numerous other properties and measurements describing the performance characteristics of systems and the engineering constraints that define them must be culled from source documents before quantified analysis can begin. Automating the process of finding and extracting the relevant quantities from a wide range of S and T documents is difficult because information about quantities and their units is often contained in unstructured text with ad hoc conventions used to convey their meaning. Currently, even simple tasks, such as searching for documents discussing RF frequencies in a band of interest, is a labor intensive and error prone process. This research addresses the challenges facing development of a document processing capability that extracts quantities and units from S and T data, and how Natural Language Processing algorithms can be used to overcome these challenges.

Cluster mislocation in kinematic Sunyaev-Zel'dovich effect extraction

NASA Astrophysics Data System (ADS)

Calafut, Victoria; Bean, Rachel; Yu, Byeonghee

2017-12-01

We investigate the impact of a variety of analysis assumptions that influence cluster identification and location on the kinematic Sunyaev-Zel'dovich (kSZ) pairwise momentum signal and covariance estimation. Photometric and spectroscopic galaxy tracers from SDSS, WISE, and DECaLs, spanning redshifts 0.05

Speeding in highway work zone: An Evaluation of methods of speed control.

PubMed

Ravani, Bahram; Wang, Chao

2018-04-01

Highway workers frequently work in close proximity of live traffic in highway work zones, traffic accidents therefore have devastating effects on worker safety. In order to reduce the potential for such accidents, methods involving use of advisory signs and police presence have been used to mitigate accident risks and improve safety for highway workers. This research evaluates the magnitude of the speeding problem in highway work zones and the effects of four levels of police presence on improving work zone safety. Speed data were collected in six different work zone locations in northern and southern California and used to determine the magnitude and nature of speeding problem in highway work zones. In addition data were collected over 11 test-days in four work zones with four levels of police presence: radar speed display with police decal and lighting, passive use of a police vehicle with radar speed display, passive use of a police vehicle without radar speed display, and active police speed enforcement near work zones. This paper analyzes this data using statistical methods to evaluate the effectiveness of these different methods of speed control on the safety of the work zone. Four Measures of Effectiveness (MOE) were used in this evaluation consisting of average speed reduction, speed variance, 85th percentile speed, and proportion of high speed vehicles. The results indicate that all levels of police presence provided statistically significant improvements in one or more of the MOEs. Copyright © 2018 Elsevier Ltd. All rights reserved.

Using IT to improve quality at NewYork-Presybterian Hospital: a requirements-driven strategic planning process.

PubMed

Kuperman, Gilad J; Boyer, Aurelia; Cole, Curt; Forman, Bruce; Stetson, Peter D; Cooper, Mary

2006-01-01

At NewYork-Presbyterian Hospital, we are committed to the delivery of high quality care. We have implemented a strategic planning process to determine the information technology initiatives that will best help us improve quality. The process began with the creation of a Clinical Quality and IT Committee. The Committee identified 2 high priority goals that would enable demonstrably high quality care: 1) excellence at data warehousing, and 2) optimal use of automated clinical documentation to capture encounter-related quality and safety data. For each high priority goal, a working group was created to develop specific recommendations. The Data Warehousing subgroup has recommended the implementation of an architecture management process and an improved ability for users to get access to aggregate data. The Structured Documentation subgroup is establishing recommendations for a documentation template creation process. The strategic planning process at times is slow, but assures that the organization is focusing on the information technology activities most likely to lead to improved quality.

Using IT to Improve Quality at NewYork-Presybterian Hospital: A Requirements-Driven Strategic Planning Process

PubMed Central

Kuperman, Gilad J.; Boyer, Aurelia; Cole, Curt; Forman, Bruce; Stetson, Peter D.; Cooper, Mary

2006-01-01

At NewYork-Presbyterian Hospital, we are committed to the delivery of high quality care. We have implemented a strategic planning process to determine the information technology initiatives that will best help us improve quality. The process began with the creation of a Clinical Quality and IT Committee. The Committee identified 2 high priority goals that would enable demonstrably high quality care: 1) excellence at data warehousing, and 2) optimal use of automated clinical documentation to capture encounter-related quality and safety data. For each high priority goal, a working group was created to develop specific recommendations. The Data Warehousing subgroup has recommended the implementation of an architecture management process and an improved ability for users to get access to aggregate data. The Structured Documentation subgroup is establishing recommendations for a documentation template creation process. The strategic planning process at times is slow, but assures that the organization is focusing on the information technology activities most likely to lead to improved quality. PMID:17238381

Defining Uniform Processes for Remediation, Probation and Termination in Residency Training

PubMed Central

Smith, Jessica L.; Lypson, Monica; Silverberg, Mark; Weizberg, Moshe; Murano, Tiffany; Lukela, Michael; Santen, Sally A.

2017-01-01

It is important that residency programs identify trainees who progress appropriately, as well as identify residents who fail to achieve educational milestones as expected so they may be remediated. The process of remediation varies greatly across training programs, due in part to the lack of standardized definitions for good standing, remediation, probation, and termination. The purpose of this educational advancement is to propose a clear remediation framework including definitions, management processes, documentation expectations and appropriate notifications. Informal remediation is initiated when a resident’s performance is deficient in one or more of the outcomes-based milestones established by the Accreditation Council for Graduate Medical Education, but not significant enough to trigger formal remediation. Formal remediation occurs when deficiencies are significant enough to warrant formal documentation because informal remediation failed or because issues are substantial. The process includes documentation in the resident’s file and notification of the graduate medical education office; however, the documentation is not disclosed if the resident successfully remediates. Probation is initiated when a resident is unsuccessful in meeting the terms of formal remediation or if initial problems are significant enough to warrant immediate probation. The process is similar to formal remediation but also includes documentation extending to the final verification of training and employment letters. Termination involves other stakeholders and occurs when a resident is unsuccessful in meeting the terms of probation or if initial problems are significant enough to warrant immediate termination. PMID:28116019

1 CFR 18.8 - Seal.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Seal. 18.8 Section 18.8 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.8 Seal. Use of a seal on an original document or...

1 CFR 18.8 - Seal.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Seal. 18.8 Section 18.8 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.8 Seal. Use of a seal on an original document or...

27 CFR 41.193 - Corporate documents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Corporate documents. 41..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.193 Corporate documents. Every corporation... permit, required by § 41.191, a true copy of the corporate charter or a certificate of corporate...

Restoration Planning: Guidance Document for Natural Resource Damage Assessment Under the Oil Pollution Act of 1990

DOT National Transportation Integrated Search

1996-08-01

The purpose of this document is to provide trustees with general guidance to develop restoration plans under OPA that comply with NEPA's procedural requirements. The focus of this document is to more fully describe the processes and products required...

Enhancement of Text Representations Using Related Document Titles.

ERIC Educational Resources Information Center

Salton, G.; Zhang, Y.

1986-01-01

Briefly reviews various methodologies for constructing enhanced document representations, discusses their general lack of usefulness, and describes a method of document indexing which uses title words taken from bibliographically related items. Evaluation of this process indicates that it is not sufficiently reliable to warrant incorporation into…

Digital document imaging systems: An overview and guide

NASA Technical Reports Server (NTRS)

1990-01-01

This is an aid to NASA managers in planning the selection of a Digital Document Imaging System (DDIS) as a possible solution for document information processing and storage. Intended to serve as a manager's guide, this document contains basic information on digital imaging systems, technology, equipment standards, issues of interoperability and interconnectivity, and issues related to selecting appropriate imaging equipment based upon well defined needs.

E-Portfolio Web-based for Students’ Internship Program Activities

NASA Astrophysics Data System (ADS)

Juhana, A.; Abdullah, A. G.; Somantri, M.; Aryadi, S.; Zakaria, D.; Amelia, N.; Arasid, W.

2018-02-01

Internship program is an important part in vocational education process to improve the quality of competent graduates. The complete work documentation process in electronic portfolio (e-Portfolio) platform will facilitate students in reporting the results of their work to both university and industry supervisor. The purpose of this research is to create a more easily accessed e-Portfolio which is appropriate for students and supervisors’ need in documenting their work and monitoring process. The method used in this research is fundamental research. This research is focused on the implementation of internship e-Portfolio features by demonstrating them to students who have conducted internship program. The result of this research is to create a proper web-based e-Portfolio which can be used to facilitate students in documenting the results of their work and aid supervisors in monitoring process during internship.

Document analysis with neural net circuits

NASA Technical Reports Server (NTRS)

Graf, Hans Peter

1994-01-01

Document analysis is one of the main applications of machine vision today and offers great opportunities for neural net circuits. Despite more and more data processing with computers, the number of paper documents is still increasing rapidly. A fast translation of data from paper into electronic format is needed almost everywhere, and when done manually, this is a time consuming process. Markets range from small scanners for personal use to high-volume document analysis systems, such as address readers for the postal service or check processing systems for banks. A major concern with present systems is the accuracy of the automatic interpretation. Today's algorithms fail miserably when noise is present, when print quality is poor, or when the layout is complex. A common approach to circumvent these problems is to restrict the variations of the documents handled by a system. In our laboratory, we had the best luck with circuits implementing basic functions, such as convolutions, that can be used in many different algorithms. To illustrate the flexibility of this approach, three applications of the NET32K circuit are described in this short viewgraph presentation: locating address blocks, cleaning document images by removing noise, and locating areas of interest in personal checks to improve image compression. Several of the ideas realized in this circuit that were inspired by neural nets, such as analog computation with a low resolution, resulted in a chip that is well suited for real-world document analysis applications and that compares favorably with alternative, 'conventional' circuits.

Requirements for a documentation of the image manipulation processes within PACS

NASA Astrophysics Data System (ADS)

Retter, Klaus; Rienhoff, Otto; Karsten, Ch.; Prince, Hazel E.

1990-08-01

This paper discusses to which extent manipulation functions which have been applied to images handled in PACS should be documented. After postulating an increasing amount of postprocessing features on PACS-consoles, legal, educational and medical reasons for a documentation of image manipulation processes are presented. Besides legal necessities, aspects of storage capacity, response time, and potential uses determine the extent of this documentation. Is there a specific kind of manipulation functions which has to be documented generally? Should the physician decide which parts of the various pathways he tries are recorded by the system? To distinguish, for example, between reversible and irreversible functions or between interactive and non-interactive functions is one step towards a solution. Another step is to establish definitions for terms like "raw" and "final" image. The paper systematizes these questions and offers strategic help. The answers will have an important impact on PACS design and functionality.

Integrated system for automated financial document processing

NASA Astrophysics Data System (ADS)

Hassanein, Khaled S.; Wesolkowski, Slawo; Higgins, Ray; Crabtree, Ralph; Peng, Antai

1997-02-01

A system was developed that integrates intelligent document analysis with multiple character/numeral recognition engines in order to achieve high accuracy automated financial document processing. In this system, images are accepted in both their grayscale and binary formats. A document analysis module starts by extracting essential features from the document to help identify its type (e.g. personal check, business check, etc.). These features are also utilized to conduct a full analysis of the image to determine the location of interesting zones such as the courtesy amount and the legal amount. These fields are then made available to several recognition knowledge sources such as courtesy amount recognition engines and legal amount recognition engines through a blackboard architecture. This architecture allows all the available knowledge sources to contribute incrementally and opportunistically to the solution of the given recognition query. Performance results on a test set of machine printed business checks using the integrated system are also reported.

Do Glass Manufacturing Plants Belong Under the Chemical Processing Plant Category

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Clarification of the Term Glass Fiber Processing Plant

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Is a Solvent Reclamation Facility Considered a Chemical Process Plant

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

PSD Applicability: Industrial Scrap Processing Company

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Processing of SIP Submittals

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Consideration of Fugitive Emissions at Oilseed Processing Plants

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Expediting the Process of a PSD for a Power-Generating Facility

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

78 FR 40745 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

.... Description: The Advance Planning Document (APD) process, established in the rules at 45 CFR part 95, subpart F, is the procedure by which States request and obtain approval for Federal financial participation... Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning Document 20 1 30 600 Estimated...

Information Model for Reusability in Clinical Trial Documentation

ERIC Educational Resources Information Center

Bahl, Bhanu

2013-01-01

In clinical research, New Drug Application (NDA) to health agencies requires generation of a large number of documents throughout the clinical development life cycle, many of which are also submitted to public databases and external partners. Current processes to assemble the information, author, review and approve the clinical research documents,…

22 CFR 172.4 - Testimony and production of documents prohibited unless approved by appropriate Department...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Testimony and production of documents... DEPARTMENT OF STATE ACCESS TO INFORMATION SERVICE OF PROCESS; PRODUCTION OR DISCLOSURE OF OFFICIAL... § 172.4 Testimony and production of documents prohibited unless approved by appropriate Department...

27 CFR 40.494 - Corporate documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Corporate documents. 40... Processed Tobacco § 40.494 Corporate documents. Every corporation that files an application for a permit as... § 40.492 a true copy of the corporate charter or a certificate of corporate existence or incorporation...

27 CFR 41.193 - Corporate documents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Corporate documents. 41..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.193 Corporate documents. Every corporation that... for the permit required by § 41.191 a true copy of the corporate charter or a certificate of corporate...

27 CFR 40.494 - Corporate documents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Corporate documents. 40... Processed Tobacco § 40.494 Corporate documents. Every corporation that files an application for a permit as... § 40.492 a true copy of the corporate charter or a certificate of corporate existence or incorporation...

27 CFR 41.193 - Corporate documents.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Corporate documents. 41.193... PROCESSED TOBACCO Tobacco Products Importers § 41.193 Corporate documents. Every corporation, before..., required by § 41.191, a true copy of the corporate charter or a certificate of corporate existence or...

27 CFR 40.494 - Corporate documents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Corporate documents. 40... Processed Tobacco § 40.494 Corporate documents. Every corporation that files an application for a permit as... § 40.492 a true copy of the corporate charter or a certificate of corporate existence or incorporation...

27 CFR 41.234 - Corporate documents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Corporate documents. 41... Processed Tobacco § 41.234 Corporate documents. Every corporation that files an application for a permit as....231 a true copy of the corporate charter or a certificate of corporate existence or incorporation...

27 CFR 41.234 - Corporate documents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Corporate documents. 41... Processed Tobacco § 41.234 Corporate documents. Every corporation that files an application for a permit as....231 a true copy of the corporate charter or a certificate of corporate existence or incorporation...

27 CFR 40.494 - Corporate documents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Corporate documents. 40... Processed Tobacco § 40.494 Corporate documents. Every corporation that files an application for a permit as... § 40.492 a true copy of the corporate charter or a certificate of corporate existence or incorporation...

22 CFR 401.22 - Attendance of witnesses and production of documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... documents. 401.22 Section 401.22 Foreign Relations INTERNATIONAL JOINT COMMISSION, UNITED STATES AND CANADA RULES OF PROCEDURE Applications § 401.22 Attendance of witnesses and production of documents. (a... authorized by the Chairman of that section. (b) All applications for subpoena or other process to compel the...

78 FR 16279 - HUD Healthcare Facility Documents: Notice Announcing Final Approved Documents and Assignment of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5623-N-03] HUD Healthcare Facility... notice announces that the healthcare facility documents have completed the notice and comment processes... of Healthcare Programs, Office of Housing, Department of Housing and Urban Development, 451 7th...

36 CFR 218.8 - Filing an objection.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Forest Service directives and land management plans, (3) Documents referenced by the Forest Service in... objection process. (b) Incorporation of documents by reference is not allowed, except for the following list of items which may be provided by including date, page, and section of the cited document. All other...

36 CFR 218.8 - Filing an objection.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Forest Service directives and land management plans, (3) Documents referenced by the Forest Service in... objection process. (b) Incorporation of documents by reference is not allowed, except for the following list of items which may be provided by including date, page, and section of the cited document. All other...

36 CFR 218.8 - Filing an objection.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Forest Service directives and land management plans, (3) Documents referenced by the Forest Service in... objection process. (b) Incorporation of documents by reference is not allowed, except for the following list of items which may be provided by including date, page, and section of the cited document. All other...

Knowledge Construction and Knowledge Representation in High School Students' Design of Hypermedia Documents

ERIC Educational Resources Information Center

Chen, Pearl; McGrath, Diane

2003-01-01

This study documented the processes of knowledge construction and knowledge representation in high school students' hypermedia design projects. Analysis of knowledge construction in linking and structural building yielded distinct types and subtypes of hypermedia documents, which were characterized by four features of knowledge representation: (a)…

HATS: A Design Procedure for Routine Business Documents.

ERIC Educational Resources Information Center

Baker, William H.

2001-01-01

Describes an approach to teaching students a basic design process for routine business documents like memos, letters, and reports. Outlines the design principles of HATS (Headings, Access, Typography, and Spacing), how they apply in before-and-after fashion to various documents, and discusses an assignment in which students redesign an existing…

The Use of Documentation in a Participatory System of Evaluation

ERIC Educational Resources Information Center

Picchio, Mariacristina; Di Giandomenico, Isabella; Musatti, Tullia

2014-01-01

Pedagogical documentation is a practice currently used in Italian early childhood education and care (ECEC) services to make visible children's learning processes in ECEC, to promote parents' participation and to support professionals' reflexive competences. These functions of pedagogical documentation have been enhanced within a system of…

Collaborative Documentation in Mental Health: Applications to Rehabilitation Counseling

ERIC Educational Resources Information Center

Sheehan, Lindsay; Lewicki, Todd

2016-01-01

Purpose: In this article, the emerging practice of collaborative documentation (CD) in community mental health care and its applications to rehabilitation counseling were explored. CD has the potential to promote greater client empowerment, clinical transparency, and documentation efficiency and quality; however, the CD process is not well…

77 FR 22316 - Notification of a Public Teleconference of the Science Advisory Board Ecological Processes and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

...) document, ``Integrating Ecological Assessment and Decision-Making at EPA, 2011 RAF Ecological Assessment... document, ``Integrating Ecological Assessment and Decision- Making at EPA, 2011 RAF Ecological Assessment... review comments on the EPA RAF draft document ``Integrating Ecological Assessment and Decision-Making at...

17 CFR 3.2 - Registration processing by the National Futures Association; notification and duration of...

Code of Federal Regulations, 2012 CFR

2012-04-01

... any registration form, any schedule or supplement thereto, any fingerprint card or other document... complete photocopy of that form, schedule, supplement, fingerprint card, or other document is filed... original form, schedule, supplement, fingerprint card, or other document. (c) The National Futures...

41 CFR 51-7.3 - Ensuring environmental documents are actually considered in agency determinations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... contains requirements to ensure adequate consideration of environmental documents in agency decision-making... environmental documents as a part of their decision-making: (1) Action: Request. (2) Start of NEPA process: Upon... Property Management Other Provisions Relating to Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO...

Milestones of mathematical model for business process management related to cost estimate documentation in petroleum industry

NASA Astrophysics Data System (ADS)

Khamidullin, R. I.

2018-05-01

The paper is devoted to milestones of the optimal mathematical model for a business process related to cost estimate documentation compiled during construction and reconstruction of oil and gas facilities. It describes the study and analysis of fundamental issues in petroleum industry, which are caused by economic instability and deterioration of a business strategy. Business process management is presented as business process modeling aimed at the improvement of the studied business process, namely main criteria of optimization and recommendations for the improvement of the above-mentioned business model.

Software Formal Inspections Guidebook

NASA Technical Reports Server (NTRS)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

Document Preparation (for Filming). ERIC Processing Manual, Appendix B.

ERIC Educational Resources Information Center

Brandhorst, Ted, Ed.; And Others

The technical report or "fugitive" literature collected by ERIC is produced using a wide variety of printing techniques, many formats, and variable degrees of quality control. Since the documents processed by ERIC go on to be microfilmed and reproduced in microfiche and paper copy for sale to users, it is essential that the ERIC document…

Operational Control Procedures for the Activated Sludge Process, Part I - Observations, Part II - Control Tests.

ERIC Educational Resources Information Center

West, Alfred W.

This is the first in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Part I of this document deals with physical observations which should be performed during each routine control test. Part II…

Extensible Markup Language: How Might It Alter the Software Documentation Process and the Role of the Technical Communicator?

ERIC Educational Resources Information Center

Battalio, John T.

2002-01-01

Describes the influence that Extensible Markup Language (XML) will have on the software documentation process and subsequently on the curricula of advanced undergraduate and master's programs in technical communication. Recommends how curricula of advanced undergraduate and master's programs in technical communication ought to change in order to…

33 CFR Appendix A to Part 230 - Processing Corps NEPA Documents

Code of Federal Regulations, 2012 CFR

2012-07-01

... Appendix A to Part 230 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROCEDURES FOR IMPLEMENTING NEPA Pt. 230, App. A Appendix A to Part 230—Processing... integrating the draft EIS or EA and draft FONSI (as appropriate), or a separate NEPA document and circulate it...

33 CFR Appendix A to Part 230 - Processing Corps NEPA Documents

Code of Federal Regulations, 2011 CFR

2011-07-01

... Appendix A to Part 230 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROCEDURES FOR IMPLEMENTING NEPA Pt. 230, App. A Appendix A to Part 230—Processing... integrating the draft EIS or EA and draft FONSI (as appropriate), or a separate NEPA document and circulate it...

33 CFR Appendix A to Part 230 - Processing Corps NEPA Documents

Code of Federal Regulations, 2013 CFR

2013-07-01

... Appendix A to Part 230 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROCEDURES FOR IMPLEMENTING NEPA Pt. 230, App. A Appendix A to Part 230—Processing... integrating the draft EIS or EA and draft FONSI (as appropriate), or a separate NEPA document and circulate it...

33 CFR Appendix A to Part 230 - Processing Corps NEPA Documents

Code of Federal Regulations, 2014 CFR

2014-07-01

... Appendix A to Part 230 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROCEDURES FOR IMPLEMENTING NEPA Pt. 230, App. A Appendix A to Part 230—Processing... integrating the draft EIS or EA and draft FONSI (as appropriate), or a separate NEPA document and circulate it...

Disclosure of Sexual Abuse in Sport Organizations: A Case Study

ERIC Educational Resources Information Center

Parent, Sylvie

2011-01-01

The disclosure of sexual abuse in the world of sports is a process that has not been widely documented. This article presents the results of a document analysis of sport organization policies and interviews conducted with 27 sport stakeholders. The interviews focus on these stakeholders' perceptions of how the disclosure process would unfold if a…

77 FR 61585 - FPL Energy Maine Hydro LLC; Notice of Intent To File License Application, Filing of Pre...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

... Hydro LLC; Notice of Intent To File License Application, Filing of Pre-Application Document (PAD... Application for a New License and Commencing Pre-filing Process. b. Project No.: 2531-067. c. Dated Filed... Commission a Pre-Application Document (PAD; including a proposed process plan and schedule), pursuant to 18...

77 FR 61584 - FFP Missouri 12, LLC; Notice of Intent To File License Application, Filing of Pre-Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

..., LLC; Notice of Intent To File License Application, Filing of Pre-Application Document, and Approving... Application and Request to Use the Traditional Licensing Process. b. Project No.: 13755-001. c. Date Filed.... m. Free Flow Power filed a Pre-Application Document (PAD; including a proposed process plan and...

Short Serious Games Creation under the Paradigm of Software Process and Competencies as Software Requirements. Case Study: Elementary Math Competencies

ERIC Educational Resources Information Center

Barajas-Saavedra, Arturo; Álvarez-Rodriguez, Francisco J.; Mendoza-González, Ricardo; Oviedo-De-Luna, Ana C.

2015-01-01

Development of digital resources is difficult due to their particular complexity relying on pedagogical aspects. Another aspect is the lack of well-defined development processes, experiences documented, and standard methodologies to guide and organize game development. Added to this, there is no documented technique to ensure correct…

Experience Documentation in Assessing Professional Practice or Work Experience: Lessons from Granting Advanced Certification to Health Education Specialists

ERIC Educational Resources Information Center

Gambescia, Stephen F.; Lysoby, Linda; Perko, Michael; Sheu, Jiunn-Jye

2016-01-01

The purpose of this article is to demonstrate how one profession used an "experience documentation process" to grant advanced certification to qualified certified health education specialists. The competency validation process approved by the certifying organization serves as an example of an additional method, aside from traditional…

Improved compliance by BPM-driven workflow automation.

PubMed

Holzmüller-Laue, Silke; Göde, Bernd; Fleischer, Heidi; Thurow, Kerstin

2014-12-01

Using methods and technologies of business process management (BPM) for the laboratory automation has important benefits (i.e., the agility of high-level automation processes, rapid interdisciplinary prototyping and implementation of laboratory tasks and procedures, and efficient real-time process documentation). A principal goal of the model-driven development is the improved transparency of processes and the alignment of process diagrams and technical code. First experiences of using the business process model and notation (BPMN) show that easy-to-read graphical process models can achieve and provide standardization of laboratory workflows. The model-based development allows one to change processes quickly and an easy adaption to changing requirements. The process models are able to host work procedures and their scheduling in compliance with predefined guidelines and policies. Finally, the process-controlled documentation of complex workflow results addresses modern laboratory needs of quality assurance. BPMN 2.0 as an automation language to control every kind of activity or subprocess is directed to complete workflows in end-to-end relationships. BPMN is applicable as a system-independent and cross-disciplinary graphical language to document all methods in laboratories (i.e., screening procedures or analytical processes). That means, with the BPM standard, a communication method of sharing process knowledge of laboratories is also available. © 2014 Society for Laboratory Automation and Screening.

Basic Hitchhiker Payload Requirements

NASA Technical Reports Server (NTRS)

Horan, Stephen

1999-01-01

This document lists the requirements for the NMSU Hitchhiker experiment payload that were developed as part of the EE 498/499 Capstone Design class during the 1999-2000 academic year. This document is used to describe the system needs as described in the mission document. The requirements listed here are those primarily used to generate the basic electronic and data processing requirements developed in the class design document. The needs of the experiment components are more fully described in the draft NASA hitchhiker customer requirements document. Many of the details for the overall payload are given in full detail in the NASA hitchhiker documentation.

Paper trails. Document management is no silver bullet, but it can patch holes as hospitals transition to paperless.

PubMed

Gamble, Kate Huvane

2009-10-01

Hospitals are leveraging content management to ease the transition from a paper-based to electronic environment. Document management is used to scan, index and archive medical records and financial documents. Even fully integrated health systems receive outside documents such as lab results and referrals that must be incorporated into the patient record. The data in scanned documents cannot be used for trending purposes without manual work. The market for natural language processing, a tool used to extract data elements from scanned documents, could ramp up significantly in the near future.

Is a Solvent Reclamation Facility Considered a Chemical Process Plant

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

One-click scanning of large-size documents using mobile phone camera

NASA Astrophysics Data System (ADS)

Liu, Sijiang; Jiang, Bo; Yang, Yuanjie

2016-07-01

Currently mobile apps for document scanning do not provide convenient operations to tackle large-size documents. In this paper, we present a one-click scanning approach for large-size documents using mobile phone camera. After capturing a continuous video of documents, our approach automatically extracts several key frames by optical flow analysis. Then based on key frames, a mobile GPU based image stitching method is adopted to generate a completed document image with high details. There are no extra manual intervention in the process and experimental results show that our app performs well, showing convenience and practicability for daily life.

Automated documentation generator for advanced protein crystal growth

NASA Technical Reports Server (NTRS)

Maddux, Gary A.; Provancha, Anna; Chattam, David

1994-01-01

To achieve an environment less dependent on the flow of paper, automated techniques of data storage and retrieval must be utilized. This software system, 'Automated Payload Experiment Tool,' seeks to provide a knowledge-based, hypertext environment for the development of NASA documentation. Once developed, the final system should be able to guide a Principal Investigator through the documentation process in a more timely and efficient manner, while supplying more accurate information to the NASA payload developer. The current system is designed for the development of the Science Requirements Document (SRD), the Experiment Requirements Document (ERD), the Project Plan, and the Safety Requirements Document.

Hierarchical, Three-Dimensional Measurement System for Crime Scene Scanning.

PubMed

Marcin, Adamczyk; Maciej, Sieniło; Robert, Sitnik; Adam, Woźniak

2017-07-01

We present a new generation of three-dimensional (3D) measuring systems, developed for the process of crime scene documentation. This measuring system facilitates the preparation of more insightful, complete, and objective documentation for crime scenes. Our system reflects the actual requirements for hierarchical documentation, and it consists of three independent 3D scanners: a laser scanner for overall measurements, a situational structured light scanner for more minute measurements, and a detailed structured light scanner for the most detailed parts of tscene. Each scanner has its own spatial resolution, of 2.0, 0.3, and 0.05 mm, respectively. The results of interviews we have conducted with technicians indicate that our developed 3D measuring system has significant potential to become a useful tool for forensic technicians. To ensure the maximum compatibility of our measuring system with the standards that regulate the documentation process, we have also performed a metrological validation and designated the maximum permissible length measurement error E MPE for each structured light scanner. In this study, we present additional results regarding documentation processes conducted during crime scene inspections and a training session. © 2017 American Academy of Forensic Sciences.

Assurance specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 4

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fourth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for assurance documentation for information systems and software, hardware, and operational procedures components, and related processes. The specifications are developed in conjunction with the corresponding management plans specifying the assurance activities to be performed.

Enhancing healthcare process design with human factors engineering and reliability science, part 2: applying the knowledge to clinical documentation systems.

PubMed

Boston-Fleischhauer, Carol

2008-02-01

The demand to redesign healthcare processes that achieve efficient, effective, and safe results is never-ending. Part 1 of this 2-part series introduced human factors engineering and reliability science as important knowledge to enhance existing operational and clinical process design methods in healthcare organizations. In part 2, the author applies this knowledge to one of the most common operational processes in healthcare: clinical documentation. Specific implementation strategies and anticipated results are discussed, along with organizational challenges and recommended executive responses.

End-of-fabrication CMOS process monitor

NASA Technical Reports Server (NTRS)

Buehler, M. G.; Allen, R. A.; Blaes, B. R.; Hannaman, D. J.; Lieneweg, U.; Lin, Y.-S.; Sayah, H. R.

1990-01-01

A set of test 'modules' for verifying the quality of a complementary metal oxide semiconductor (CMOS) process at the end of the wafer fabrication is documented. By electrical testing of specific structures, over thirty parameters are collected characterizing interconnects, dielectrics, contacts, transistors, and inverters. Each test module contains a specification of its purpose, the layout of the test structure, the test procedures, the data reduction algorithms, and exemplary results obtained from 3-, 2-, or 1.6-micrometer CMOS/bulk processes. The document is intended to establish standard process qualification procedures for Application Specific Integrated Circuits (ASIC's).

Staff experiences within the implementation of computer-based nursing records in residential aged care facilities: a systematic review and synthesis of qualitative research.

PubMed

Meißner, Anne; Schnepp, Wilfried

2014-06-20

Since the introduction of electronic nursing documentation systems, its implementation in recent years has increased rapidly in Germany. The objectives of such systems are to save time, to improve information handling and to improve quality. To integrate IT in the daily working processes, the employee is the pivotal element. Therefore it is important to understand nurses' experience with IT implementation. At present the literature shows a lack of understanding exploring staff experiences within the implementation process. A systematic review and meta-ethnographic synthesis of primary studies using qualitative methods was conducted in PubMed, CINAHL, and Cochrane. It adheres to the principles of the PRISMA statement. The studies were original, peer-reviewed articles from 2000 to 2013, focusing on computer-based nursing documentation in Residential Aged Care Facilities. The use of IT requires a different form of information processing. Some experience this new form of information processing as a benefit while others do not. The latter find it more difficult to enter data and this result in poor clinical documentation. Improvement in the quality of residents' records leads to an overall improvement in the quality of care. However, if the quality of those records is poor, some residents do not receive the necessary care. Furthermore, the length of time necessary to complete the documentation is a prominent theme within that process. Those who are more efficient with the electronic documentation demonstrate improved time management. For those who are less efficient with electronic documentation the information processing is perceived as time consuming. Normally, it is possible to experience benefits when using IT, but this depends on either promoting or hindering factors, e.g. ease of use and ability to use it, equipment availability and technical functionality, as well as attitude. In summary, the findings showed that members of staff experience IT as a benefit when it simplifies their daily working routines and as a burden when it complicates their working processes. Whether IT complicates or simplifies their routines depends on influencing factors. The line between benefit and burden is semipermeable. The experiences differ according to duties and responsibilities.

The potential for advanced computerized aids for comprehensible writing of technical documents

NASA Astrophysics Data System (ADS)

Kieras, D. E.

1985-01-01

It is widely agreed that technical documents for equipment are poorly written and hard to comprehend. This has been a long-standing problem because the information-processing demands of editing and revision are so high that many comprehensibility problems go undetected. However, many of these problems can be detected by computerized systems that scan a document and point out where the writing can be improved. Existing systems of this type are based on conventional writing customs, rather than on the research literature on comprehension, and give poor advice or miss important problems. They also do not process the input document to any depth. An approach to advanced writing aids is described; such a system would base its criticisms on what is known about the cognition psychology of comprehension, and would make use of techniques from artificial intelligence for processing the language. Some examples of the relevant research results are presented, and a demonstration system of this type is briefly described.

Nanomaterial Case Study: Nanoscale Silver in Disinfectant ...

EPA Pesticide Factsheets

This draft document presents a case study of engineered nanoscale silver (nano-Ag), focusing on the specific example of nano-Ag as possibly used in disinfectant sprays. This case study is organized around a comprehensive environmental assessment (CEA) framework, which combines a product life-cycle perspective with the risk assessment paradigm. The document does not draw conclusions about potential risks. Instead, it is intended to be used as part of a process to identify what is known and unknown about nano-Ag in a selected application and can be used as a starting point to identify and prioritize possible research directions to support future assessments of nanomaterials. The information presented in the case study and the questions raised in this document are a foundation for a process to determine priorities among various research topics and directions. After that process has been completed, a final chapter will be added to this document to summarize highlights from preceding chapters and the major research issues that have emerged.

Audit of nuclear medicine scientific and technical standards.

PubMed

Jarritt, Peter H; Perkins, Alan C; Woods, Sandra D

2004-08-01

The British Nuclear Medicine Society has developed a process for the service-specific organizational audit of nuclear medicine departments. This process identified the need for a scheme suitable for the audit of the scientific and technical standards of a department providing such a service. This document has evolved following audit visits of a number of UK departments. It is intended to be used as a written document to facilitate the audit procedure and may be used for both external and self-audit purposes. Scientific and technical standards have been derived from a number of sources, including regulatory documents, notes for guidance and peer-reviewed publications. The audit scheme is presented as a series of questions with responses graded according to legal and safety obligations (A), good practice (B) and desirable aspects of service delivery (C). This document should be regarded as part of an audit framework and should be kept under review as the process evolves to meet the future demands of this high-technology-based clinical service.

Implementation of the common phrase index method on the phrase query for information retrieval

NASA Astrophysics Data System (ADS)

Fatmawati, Triyah; Zaman, Badrus; Werdiningsih, Indah

2017-08-01

As the development of technology, the process of finding information on the news text is easy, because the text of the news is not only distributed in print media, such as newspapers, but also in electronic media that can be accessed using the search engine. In the process of finding relevant documents on the search engine, a phrase often used as a query. The number of words that make up the phrase query and their position obviously affect the relevance of the document produced. As a result, the accuracy of the information obtained will be affected. Based on the outlined problem, the purpose of this research was to analyze the implementation of the common phrase index method on information retrieval. This research will be conducted in English news text and implemented on a prototype to determine the relevance level of the documents produced. The system is built with the stages of pre-processing, indexing, term weighting calculation, and cosine similarity calculation. Then the system will display the document search results in a sequence, based on the cosine similarity. Furthermore, system testing will be conducted using 100 documents and 20 queries. That result is then used for the evaluation stage. First, determine the relevant documents using kappa statistic calculation. Second, determine the system success rate using precision, recall, and F-measure calculation. In this research, the result of kappa statistic calculation was 0.71, so that the relevant documents are eligible for the system evaluation. Then the calculation of precision, recall, and F-measure produces precision of 0.37, recall of 0.50, and F-measure of 0.43. From this result can be said that the success rate of the system to produce relevant documents is low.

Development of integrated programs for Aerospace-vehicle Design (IPAD): Product program management systems

NASA Technical Reports Server (NTRS)

Isenberg, J. M.; Southall, J. W.

1979-01-01

The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.

Validation Process Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, John E.; English, Christine M.; Gesick, Joshua C.

This report documents the validation process as applied to projects awarded through Funding Opportunity Announcements (FOAs) within the U.S. Department of Energy Bioenergy Technologies Office (DOE-BETO). It describes the procedures used to protect and verify project data, as well as the systematic framework used to evaluate and track performance metrics throughout the life of the project. This report also describes the procedures used to validate the proposed process design, cost data, analysis methodologies, and supporting documentation provided by the recipients.

Patterns for Effectively Documenting Frameworks

NASA Astrophysics Data System (ADS)

Aguiar, Ademar; David, Gabriel

Good design and implementation are necessary but not sufficient pre-requisites for successfully reusing object-oriented frameworks. Although not always recognized, good documentation is crucial for effective framework reuse, and often hard, costly, and tiresome, coming with many issues, especially when we are not aware of the key problems and respective ways of addressing them. Based on existing literature, case studies and lessons learned, the authors have been mining proven solutions to recurrent problems of documenting object-oriented frameworks, and writing them in pattern form, as patterns are a very effective way of communicating expertise and best practices. This paper presents a small set of patterns addressing problems related to the framework documentation itself, here seen as an autonomous and tangible product independent of the process used to create it. The patterns aim at helping non-experts on cost-effectively documenting object-oriented frameworks. In concrete, these patterns provide guidance on choosing the kinds of documents to produce, how to relate them, and which contents to include. Although the focus is more on the documents themselves, rather than on the process and tools to produce them, some guidelines are also presented in the paper to help on applying the patterns to a specific framework.

Natural Language Processing–Enabled and Conventional Data Capture Methods for Input to Electronic Health Records: A Comparative Usability Study

PubMed Central

Sheehan, Barbara; Stetson, Peter; Bhatt, Ashish R; Field, Adele I; Patel, Chirag; Maisel, James Mark

2016-01-01

Background The process of documentation in electronic health records (EHRs) is known to be time consuming, inefficient, and cumbersome. The use of dictation coupled with manual transcription has become an increasingly common practice. In recent years, natural language processing (NLP)–enabled data capture has become a viable alternative for data entry. It enables the clinician to maintain control of the process and potentially reduce the documentation burden. The question remains how this NLP-enabled workflow will impact EHR usability and whether it can meet the structured data and other EHR requirements while enhancing the user’s experience. Objective The objective of this study is evaluate the comparative effectiveness of an NLP-enabled data capture method using dictation and data extraction from transcribed documents (NLP Entry) in terms of documentation time, documentation quality, and usability versus standard EHR keyboard-and-mouse data entry. Methods This formative study investigated the results of using 4 combinations of NLP Entry and Standard Entry methods (“protocols”) of EHR data capture. We compared a novel dictation-based protocol using MediSapien NLP (NLP-NLP) for structured data capture against a standard structured data capture protocol (Standard-Standard) as well as 2 novel hybrid protocols (NLP-Standard and Standard-NLP). The 31 participants included neurologists, cardiologists, and nephrologists. Participants generated 4 consultation or admission notes using 4 documentation protocols. We recorded the time on task, documentation quality (using the Physician Documentation Quality Instrument, PDQI-9), and usability of the documentation processes. Results A total of 118 notes were documented across the 3 subject areas. The NLP-NLP protocol required a median of 5.2 minutes per cardiology note, 7.3 minutes per nephrology note, and 8.5 minutes per neurology note compared with 16.9, 20.7, and 21.2 minutes, respectively, using the Standard-Standard protocol and 13.8, 21.3, and 18.7 minutes using the Standard-NLP protocol (1 of 2 hybrid methods). Using 8 out of 9 characteristics measured by the PDQI-9 instrument, the NLP-NLP protocol received a median quality score sum of 24.5; the Standard-Standard protocol received a median sum of 29; and the Standard-NLP protocol received a median sum of 29.5. The mean total score of the usability measure was 36.7 when the participants used the NLP-NLP protocol compared with 30.3 when they used the Standard-Standard protocol. Conclusions In this study, the feasibility of an approach to EHR data capture involving the application of NLP to transcribed dictation was demonstrated. This novel dictation-based approach has the potential to reduce the time required for documentation and improve usability while maintaining documentation quality. Future research will evaluate the NLP-based EHR data capture approach in a clinical setting. It is reasonable to assert that EHRs will increasingly use NLP-enabled data entry tools such as MediSapien NLP because they hold promise for enhancing the documentation process and end-user experience. PMID:27793791

Interactive degraded document enhancement and ground truth generation

NASA Astrophysics Data System (ADS)

Bal, G.; Agam, G.; Frieder, O.; Frieder, G.

2008-01-01

Degraded documents are frequently obtained in various situations. Examples of degraded document collections include historical document depositories, document obtained in legal and security investigations, and legal and medical archives. Degraded document images are hard to to read and are hard to analyze using computerized techniques. There is hence a need for systems that are capable of enhancing such images. We describe a language-independent semi-automated system for enhancing degraded document images that is capable of exploiting inter- and intra-document coherence. The system is capable of processing document images with high levels of degradations and can be used for ground truthing of degraded document images. Ground truthing of degraded document images is extremely important in several aspects: it enables quantitative performance measurements of enhancement systems and facilitates model estimation that can be used to improve performance. Performance evaluation is provided using the historical Frieder diaries collection.1

An updated look at document security: from initiation to storage or shredder.

PubMed

McConnell, Charles R

2014-01-01

In these days of close attention to security of information handled electronically, there is often a tendency to overlook the security of hard-copy documents. Document security can involve many areas of business, but the health care department manager's concerns are primarily for patient records and employee documentation. Document security is closely related to growing concerns for individual privacy; guidelines are furnished for protecting employee privacy by separating retention practices for business information from personal information. Sensitive documentation requires rules and procedures for processing, retaining, accessing, storing, and eventually destroying. Also, documents that are missing or incomplete at times present unique problems for the organization. The department manager is provided with some simple rules for safeguarding employee and patient documentation.

Kidney transplantation process in Brazil represented in business process modeling notation.

PubMed

Peres Penteado, A; Molina Cohrs, F; Diniz Hummel, A; Erbs, J; Maciel, R F; Feijó Ortolani, C L; de Aguiar Roza, B; Torres Pisa, I

2015-05-01

Kidney transplantation is considered to be the best treatment for people with chronic kidney failure, because it improves the patients' quality of life and increases their length of survival compared with patients undergoing dialysis. The kidney transplantation process in Brazil is defined through laws, decrees, ordinances, and resolutions, but there is no visual representation of this process. The aim of this study was to analyze official documents to construct a representation of the kidney transplantation process in Brazil with the use of business process modeling notation (BPMN). The methodology for this study was based on an exploratory observational study, document analysis, and construction of process diagrams with the use of BPMN. Two rounds of validations by specialists were conducted. The result includes the kidney transplantation process in Brazil representation with the use of BPMN. We analyzed 2 digital documents that resulted in 2 processes with 45 total of activities and events, 6 organizations involved, and 6 different stages of the process. The constructed representation makes it easier to understand the rules for the business of kidney transplantation and can be used by the health care professionals involved in the various activities within this process. Construction of a representation with language appropriate for the Brazilian lay public is underway. Copyright © 2015 Elsevier Inc. All rights reserved.

Speech Recognition as a Transcription Aid: A Randomized Comparison With Standard Transcription

PubMed Central

Mohr, David N.; Turner, David W.; Pond, Gregory R.; Kamath, Joseph S.; De Vos, Cathy B.; Carpenter, Paul C.

2003-01-01

Objective. Speech recognition promises to reduce information entry costs for clinical information systems. It is most likely to be accepted across an organization if physicians can dictate without concerning themselves with real-time recognition and editing; assistants can then edit and process the computer-generated document. Our objective was to evaluate the use of speech-recognition technology in a randomized controlled trial using our institutional infrastructure. Design. Clinical note dictations from physicians in two specialty divisions were randomized to either a standard transcription process or a speech-recognition process. Secretaries and transcriptionists also were assigned randomly to each of these processes. Measurements. The duration of each dictation was measured. The amount of time spent processing a dictation to yield a finished document also was measured. Secretarial and transcriptionist productivity, defined as hours of secretary work per minute of dictation processed, was determined for speech recognition and standard transcription. Results. Secretaries in the endocrinology division were 87.3% (confidence interval, 83.3%, 92.3%) as productive with the speech-recognition technology as implemented in this study as they were using standard transcription. Psychiatry transcriptionists and secretaries were similarly less productive. Author, secretary, and type of clinical note were significant (p < 0.05) predictors of productivity. Conclusion. When implemented in an organization with an existing document-processing infrastructure (which included training and interfaces of the speech-recognition editor with the existing document entry application), speech recognition did not improve the productivity of secretaries or transcriptionists. PMID:12509359

Requirements Specification Document

DOT National Transportation Integrated Search

1996-04-26

The System Definition Document identifies the top level processes, data flows, : and system controls for the Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center (C-TIC). This Requirements Specification establishes the requirements...

A Semantic Approach for Geospatial Information Extraction from Unstructured Documents

NASA Astrophysics Data System (ADS)

Sallaberry, Christian; Gaio, Mauro; Lesbegueries, Julien; Loustau, Pierre

Local cultural heritage document collections are characterized by their content, which is strongly attached to a territory and its land history (i.e., geographical references). Our contribution aims at making the content retrieval process more efficient whenever a query includes geographic criteria. We propose a core model for a formal representation of geographic information. It takes into account characteristics of different modes of expression, such as written language, captures of drawings, maps, photographs, etc. We have developed a prototype that fully implements geographic information extraction (IE) and geographic information retrieval (IR) processes. All PIV prototype processing resources are designed as Web Services. We propose a geographic IE process based on semantic treatment as a supplement to classical IE approaches. We implement geographic IR by using intersection computing algorithms that seek out any intersection between formal geocoded representations of geographic information in a user query and similar representations in document collection indexes.

Peer Review of EPA's Draft BMDS Document: Exponential ...

EPA Pesticide Factsheets

BMDS is one of the Agency's premier tools for estimating risk assessments, therefore the validity and reliability of its statistical models are of paramount importance. This page provides links to peer review of the BMDS applications and its models as they were developed and eventually released documenting the rigorous review process taken to provide the best science tools available for statistical modeling. This page provides links to peer review of the BMDS applications and its models as they were developed and eventually released documenting the rigorous review process taken to provide the best science tools available for statistical modeling.

The Precise and Efficient Identification of Medical Order Forms Using Shape Trees

NASA Astrophysics Data System (ADS)

Henker, Uwe; Petersohn, Uwe; Ultsch, Alfred

A powerful and flexible technique to identify, classify and process documents using images from a scanning process is presented. The types of documents can be described to the system as a set of differentiating features in a case base using shape trees. The features are filtered and abstracted from an extremely reduced scanner image of the document. Classification rules are stored with the cases to enable precise recognition and further mark reading and Optical Character Recognition (OCR) process. The method is implemented in a system which actually processes the majority of requests for medical lab procedures in Germany. A large practical experiment with data from practitioners was performed. An average of 97% of the forms were correctly identified; none were identified incorrectly. This meets the quality requirements for most medical applications. The modular description of the recognition process allows for a flexible adaptation of future changes to the form and content of the document’s structures.

The Place of Problem Solving in Contemporary Mathematics Curriculum Documents

ERIC Educational Resources Information Center

Stacey, Kaye

2005-01-01

This paper reviews the presentation of problem solving and process aspects of mathematics in curriculum documents from Australia, UK, USA and Singapore. The place of problem solving in the documents is reviewed and contrasted, and illustrative problems from teachers' support materials are used to demonstrate how problem solving is now more often…

78 FR 37819 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

.... Description: The Advance Planning Document (APD) process, established in the rules at 45 CFR Part 95, Subpart F, is the procedure by which States request and obtain approval for Federal financial participation... Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning Document 20 1 30 600 [[Page 37820...

Statistical Techniques for Efficient Indexing and Retrieval of Document Images

ERIC Educational Resources Information Center

Bhardwaj, Anurag

2010-01-01

We have developed statistical techniques to improve the performance of document image search systems where the intermediate step of OCR based transcription is not used. Previous research in this area has largely focused on challenges pertaining to generation of small lexicons for processing handwritten documents and enhancement of poor quality…

18 CFR 5.24 - Applications not requiring a draft NEPA document.

Code of Federal Regulations, 2013 CFR

2013-04-01

... requiring a draft NEPA document. 5.24 Section 5.24 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.24 Applications not requiring a draft NEPA document. (a) If the Commission determines... environmental impact statement and that a draft environmental assessment will not be required, the Commission...

18 CFR 5.24 - Applications not requiring a draft NEPA document.

Code of Federal Regulations, 2012 CFR

2012-04-01

... requiring a draft NEPA document. 5.24 Section 5.24 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.24 Applications not requiring a draft NEPA document. (a) If the Commission determines... environmental impact statement and that a draft environmental assessment will not be required, the Commission...

18 CFR 5.24 - Applications not requiring a draft NEPA document.

Code of Federal Regulations, 2014 CFR

2014-04-01

... requiring a draft NEPA document. 5.24 Section 5.24 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.24 Applications not requiring a draft NEPA document. (a) If the Commission determines... environmental impact statement and that a draft environmental assessment will not be required, the Commission...

20 CFR 668.710 - What planning documents must an INA grantee submit?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning documents must an INA grantee... Planning/Funding Process § 668.710 What planning documents must an INA grantee submit? Each grantee... participant services and expenditures covering the two-year planning cycle. We will, in consultation with the...

Designing Better Camels: Developing Effective Documentation for Computer Software.

ERIC Educational Resources Information Center

Zacher, Candace M.

This guide to the development of effective documentation for users of computer software begins by identifying five types of documentation, i.e., training manuals, user guides, tutorials, on-screen help comments, and troubleshooting manuals. Six steps in the development process are then outlined and briefly described: (1) planning and preparation;…

1 CFR 15.4 - Reproduction and certification of copies of acts and documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Reproduction and certification of copies of acts and documents. 15.4 Section 15.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS SERVICES TO FEDERAL AGENCIES General § 15.4...

Gender Differences in Reading Performance on Documents across Countries.

ERIC Educational Resources Information Center

Rosen, Monica

2001-01-01

Notes how females are known to excel over males in most reading tasks, but not consistently so in tasks that require processing information from maps, tables, charts and diagrams, so called "Documents." Describes and analyzes gender differences on Document tasks, and investigates if and how the pattern of differences varies over countries. (SG)

Processing United Nations Documents in the University of Michigan Library.

ERIC Educational Resources Information Center

Stolper, Gertrude

This guide provides detailed instructions for recording documents in the United Nations (UN) card catalog which provides access to the UN depository collection in the Harlan Hatcher Graduate Library at the University of Michigan. Procedures for handling documents when they are received include stamping, counting, and sorting into five categories:…

NASAwide electronic publishing system-prototype STI electronic document distribution: Stage-4 evaluation report. Part 2; Appendices

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Collins, Mary; Caswell, Pamela; Haynes, Bob; Nelson, Michael L.; Holm, Jeanne; Buquo, Lynn; Tingle, Annette; Cooper, Bill; Stiltner, Roy

1996-01-01

This evaluation report contains an introduction, seven chapters, and five appendices. The Introduction describes the purpose, conceptual framework, functional description, and technical report server of the Scientific and Technical Information (STI) Electronic Document Distribution (EDD) project. Chapter 1 documents the results of the prototype STI EDD in actual operation. Chapter 2 documents each NASA center's post processing publication processes. Chapter 3 documents each center's STI software, hardware. and communications configurations. Chapter 7 documents STI EDD policy, practices, and procedures. The appendices consist of (A) the STI EDD Project Plan, (B) Team members, (C) Phasing Schedules, (D) Accessing On-line Reports, and (E) Creating an HTML File and Setting Up an xTRS. In summary, Stage 4 of the NASAwide Electronic Publishing System is the final phase of its implementation through the prototyping and gradual integration of each NASA center's electronic printing systems, desk top publishing systems, and technical report servers, to be able to provide to NASA's engineers, researchers, scientists, and external users, the widest practicable and appropriate dissemination of information concerning its activities and the result thereof to their work stations.

Using CASE tools to write engineering specifications

NASA Astrophysics Data System (ADS)

Henry, James E.; Howard, Robert W.; Iveland, Scott T.

1993-08-01

There are always a wide variety of obstacles to writing and maintaining engineering documentation. To combat these problems, documentation generation can be linked to the process of engineering development. The same graphics and communication tools used for structured system analysis and design (SSA/SSD) also form the basis for the documentation. The goal is to build a living document, such that as an engineering design changes, the documentation will `automatically' revise. `Automatic' is qualified by the need to maintain textual descriptions associated with the SSA/SSD graphics, and the need to generate new documents. This paper describes a methodology and a computer aided system engineering toolset that enables a relatively seamless transition into document generation for the development engineering team.

Parallel processing considerations for image recognition tasks

NASA Astrophysics Data System (ADS)

Simske, Steven J.

2011-01-01

Many image recognition tasks are well-suited to parallel processing. The most obvious example is that many imaging tasks require the analysis of multiple images. From this standpoint, then, parallel processing need be no more complicated than assigning individual images to individual processors. However, there are three less trivial categories of parallel processing that will be considered in this paper: parallel processing (1) by task; (2) by image region; and (3) by meta-algorithm. Parallel processing by task allows the assignment of multiple workflows-as diverse as optical character recognition [OCR], document classification and barcode reading-to parallel pipelines. This can substantially decrease time to completion for the document tasks. For this approach, each parallel pipeline is generally performing a different task. Parallel processing by image region allows a larger imaging task to be sub-divided into a set of parallel pipelines, each performing the same task but on a different data set. This type of image analysis is readily addressed by a map-reduce approach. Examples include document skew detection and multiple face detection and tracking. Finally, parallel processing by meta-algorithm allows different algorithms to be deployed on the same image simultaneously. This approach may result in improved accuracy.

'A major lobbying effort to change and unify the excise structure in six Central American countries': How British American Tobacco influenced tax and tariff rates in the Central American Common Market.

PubMed

Holden, Chris; Lee, Kelley

2011-05-19

Transnational tobacco companies (TTCs) may respond to processes of regional trade integration both by acting politically to influence policy and by reorganising their own operations. The Central American Common Market (CACM) was reinvigorated in the 1990s, reflecting processes of regional trade liberalisation in Latin America and globally. This study aimed to ascertain how British American Tobacco (BAT), which dominated the markets of the CACM, sought to influence policy towards it by member country governments and how the CACM process impacted upon BAT's operations. The study analysed internal tobacco industry documents released as a result of litigation in the US and available from the online Legacy Tobacco Documents Library at http://legacy.library.ucsf.edu/. Documents were retrieved by searching the BAT collection using key terms in an iterative process. Analysis was based on an interpretive approach involving a process of attempting to understand the meanings of individual documents and relating these to other documents in the set, identifying the central themes of documents and clusters of documents, contextualising the documentary data, and choosing representative material in order to present findings. Utilising its multinational character, BAT was able to act in a coordinated way across the member countries of the CACM to influence tariffs and taxes to its advantage. Documents demonstrate a high degree of access to governments and officials. The company conducted a coordinated, and largely successful, attempt to keep external tariff rates for cigarettes high and to reduce external tariffs for key inputs, whilst also influencing the harmonisation of excise taxes between countries. Protected by these high external tariffs, it reorganised its own operations to take advantage of regional economies of scale. In direct contradiction to arguments presented to CACM governments that affording the tobacco industry protection via high cigarette tariffs would safeguard employment, the company's regional reorganisation involved the loss of hundreds of jobs. Regional integration organisations and their member states should be aware of the capacity of TTCs to act in a coordinated transnational manner to influence policy in their own interests, and coordinate their own public health and tax policies in a similarly effective way.

'A major lobbying effort to change and unify the excise structure in six Central American countries': How British American Tobacco influenced tax and tariff rates in the Central American Common Market

PubMed Central

2011-01-01

Background Transnational tobacco companies (TTCs) may respond to processes of regional trade integration both by acting politically to influence policy and by reorganising their own operations. The Central American Common Market (CACM) was reinvigorated in the 1990s, reflecting processes of regional trade liberalisation in Latin America and globally. This study aimed to ascertain how British American Tobacco (BAT), which dominated the markets of the CACM, sought to influence policy towards it by member country governments and how the CACM process impacted upon BAT's operations. Methods The study analysed internal tobacco industry documents released as a result of litigation in the US and available from the online Legacy Tobacco Documents Library at http://legacy.library.ucsf.edu/. Documents were retrieved by searching the BAT collection using key terms in an iterative process. Analysis was based on an interpretive approach involving a process of attempting to understand the meanings of individual documents and relating these to other documents in the set, identifying the central themes of documents and clusters of documents, contextualising the documentary data, and choosing representative material in order to present findings. Results Utilising its multinational character, BAT was able to act in a coordinated way across the member countries of the CACM to influence tariffs and taxes to its advantage. Documents demonstrate a high degree of access to governments and officials. The company conducted a coordinated, and largely successful, attempt to keep external tariff rates for cigarettes high and to reduce external tariffs for key inputs, whilst also influencing the harmonisation of excise taxes between countries. Protected by these high external tariffs, it reorganised its own operations to take advantage of regional economies of scale. In direct contradiction to arguments presented to CACM governments that affording the tobacco industry protection via high cigarette tariffs would safeguard employment, the company's regional reorganisation involved the loss of hundreds of jobs. Conclusions Regional integration organisations and their member states should be aware of the capacity of TTCs to act in a coordinated transnational manner to influence policy in their own interests, and coordinate their own public health and tax policies in a similarly effective way. PMID:21595921

Process of Converting Military Training Materials to Competency-Based Modules for Civilian Use. A Documentation.

ERIC Educational Resources Information Center

Organization and Human Resources Development Associates, Inc., Austin, TX.

This document outlines the steps in the process of converting military training materials in physician and dental assistant education to competency-based learning modules for use in the civilian sector. Subsections discuss the activity and any problems or issues involved for 14 steps. The 14 steps are as follow: establish liaison to obtain…

Global Grid Telemedicine System: Expert Consult Manager

DTIC Science & Technology

2000-10-01

Department of the Army position, policy or decision unless so designated by other documentation. DTIC QUALITY iw^^rxi 20010122 014 REPORT DOCUMENTATION...processes and personnel for collecting, processing, storing, disseminating and managing information on demand to warfighters, policy makers, and...to be responsive to and incorporate current and future policy decisions. (7) Be continuously aware, along with Network and Bandwidth managers, of

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

Gaia DR2 documentation Chapter 1: Introduction

NASA Astrophysics Data System (ADS)

de Bruijne, J. H. J.; Abreu, A.; Brown, A. G. A.; Castañeda, J.; Cheek, N.; Crowley, C.; De Angeli, F.; Drimmel, R.; Fabricius, C.; Fleitas, J.; Gracia-Abril, G.; Guerra, R.; Hutton, A.; Messineo, R.; Mora, A.; Nienartowicz, K.; Panem, C.; Siddiqui, H.

2018-04-01

This chapter of the Gaia DR2 documentation describes the Gaia mission, the Gaia spacecraft, and the organisation of the Gaia Data Processing and Analysis Consortium (DPAC), which is responsible for the processing and analysis of the Gaia data. Furthermore, various properties of the data release are summarised, including statistical properties, object statistics, completeness, selection and filtering criteria, and limitations of the data.

Forest Service National Visitor Use Monitoring Process: Research Method Documentation

Treesearch

Donald B.K. English; Susan M. Kocis; Stanley J. Zarnoch; J. Ross Arnold

2002-01-01

In response to the need for improved information on recreational use of National Forest System lands, the authors have developed a nationwide, systematic monitoring process. This report documents the methods they used in estimating recreational use on an annual basis. The basic unit of measure is exiting volume of visitors from a recreation site on a given day. Sites...

Women's, midwives' and obstetricians' experiences of a structured process to document refusal of recommended maternity care.

PubMed

Jenkinson, Bec; Kruske, Sue; Stapleton, Helen; Beckmann, Michael; Reynolds, Maree; Kildea, Sue

2016-12-01

Ethical and professional guidance for midwives and obstetricians emphasises informed consent and respect for patient autonomy; the right to refuse care is well established. However, the existing literature is largely silent on the appropriate clinical responses when pregnant women refuse recommended care, and accounts of disrespectful interactions and conflict are numerous. Policies and processes to support women and maternity care providers are rare and unstudied. To document the perspectives of women, midwives and obstetricians following the introduction of a structured process (Maternity Care Plan; MCP) to document refusal of recommended maternity care in a large tertiary maternity unit. A qualitative, interpretive study involved thematic analysis of in-depth semi-structured interviews with women (n=9), midwives (n=12) and obstetricians (n=9). Four major themes were identified including: 'Reassuring and supporting clinicians'; 'Keeping the door open'; 'Varied awareness, criteria and use of the MCP process' and 'No guarantees'. Clinicians felt protected and reassured by the structured documentation and communication process and valued keeping women engaged in hospital care. This, in turn, protected women's access to maternity care. However, the process could not guarantee favourable responses from other clinicians subsequently involved in the woman's care. Ongoing discussions of risk, perceived by women and some midwives to be pressure to consent to recommended care, were still evident. These limitations may have been attributable to the absence of agreed criteria for initiating the MCP process and fragmented care. Varying awareness and use of the process also diminished women's access to it. Copyright © 2016 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

US/UK Loan Account Project Status PMOD477

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, Patrice A.

2012-07-12

The viewgraphs describe the status of PMOD477 for LANL. The meeting will occur at DOE-HQ with NA-11 and Military Applications personnel in attendance. Serves to repatriate material with a balance to zero by December 2012. Phase 1 -- Establish formality of operations for War Reserve (WR): Complete surrogate taskings to A90 through a Materials Channel and perform US/UK lessons learned; Complete the US/UK agreed Quality Acceptance Plan, Materials Plan, Shipping procedure, and establish the formal UK/US point of contacts. Phase 2 -- Metal Manufacture (WR): Process material and store material as electrorefined metal (ER) rings, with initial assay and isotopicmore » analysis, prior to manufacturing. Material is cast into accepted configuration and appropriate acceptance document for each aliquot will be generated. Phase 3 -- Intermediate Material Manufacture, Packaging and Shipping (WR): Continue processing of the material in accepted configuration with appropriate acceptance documentation for each aliquot. Provide an initial tasking of the material owed to UK including appropriate quality acceptance documentation. Phase 4 -- Complete Tasking (WR). Phase 5 -- Residue Processing (Non-WR): Complete processing of residue material and waste into accepted configuration with appropriate acceptance document for disposal.« less

Criteria for Determining whether Equipment is Air Pollution Control Equipment or Process Equipment

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Evaluating Process Changes and the Impact on Emissions at Holcim's Ada, Oklahoma Plant

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Equity in public health standards: a qualitative document analysis of policies from two Canadian provinces

PubMed Central

2012-01-01

Introduction Promoting health equity is a key goal of many public health systems. However, little is known about how equity is conceptualized in such systems, particularly as standards of public health practice are established. As part of a larger study examining the renewal of public health in two Canadian provinces, Ontario and British Columbia (BC), we undertook an analysis of relevant public health documents related to equity. The aim of this paper is to discuss how equity is considered within documents that outline standards for public health. Methods A research team consisting of policymakers and academics identified key documents related to the public health renewal process in each province. The documents were analyzed using constant comparative analysis to identify key themes related to the conceptualization and integration of health equity as part of public health renewal in Ontario and BC. Documents were coded inductively with higher levels of abstraction achieved through multiple readings. Sets of questions were developed to guide the analysis throughout the process. Results In both sets of provincial documents health inequities were defined in a similar fashion, as the consequence of unfair or unjust structural conditions. Reducing health inequities was an explicit goal of the public health renewal process. In Ontario, addressing “priority populations” was used as a proxy term for health equity and the focus was on existing programs. In BC, the incorporation of an equity lens enhanced the identification of health inequities, with a particular emphasis on the social determinants of health. In both, priority was given to reducing barriers to public health services and to forming partnerships with other sectors to reduce health inequities. Limits to the accountability of public health to reduce health inequities were identified in both provinces. Conclusion This study contributes to understanding how health equity is conceptualized and incorporated into standards for local public health. As reflected in their policies, both provinces have embraced the importance of reducing health inequities. Both concepualized this process as rooted in structural injustices and the social determinants of health. Differences in the conceptualization of health equity likely reflect contextual influences on the public health renewal processes in each jurisdiction. PMID:22632097

Baseline Description and Analysis of the Operations Related to Warehouse Controlled Documents at the Navy Publications and Forms Center, Philadelphia, Pennsylvania. Volume I. Phase I.

DTIC Science & Technology

1980-03-06

performing the present NPFC tasks. Potential automation technologies may include order processing mechanization, demand printing from micrographic or...effort and documented in this volume included the following: a. Functional description of the order processing activities as they currently operate. b...covered under each analysis area. i It is obvious from the exhibit that the functional description of order processing operations was to include COG I

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

Guidance Documents for Inert Ingredients

EPA Pesticide Factsheets

These guidance documents provide information on various inert ingredient issues, including the general process for submitting petitions or requests, adding trade names to our database, and doing searches related to inert ingredients.

System Definition Document

DOT National Transportation Integrated Search

1996-06-12

The Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center : (C-TIC) System Definition Document describes the C-TIC concept and defines the : high level processes and dataflows. The Requirements Specification together : with the Inte...

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-05-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

[Development of a medical equipment support information system based on PDF portable document].

PubMed

Cheng, Jiangbo; Wang, Weidong

2010-07-01

According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-02-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

Degraded document image enhancement

NASA Astrophysics Data System (ADS)

Agam, G.; Bal, G.; Frieder, G.; Frieder, O.

2007-01-01

Poor quality documents are obtained in various situations such as historical document collections, legal archives, security investigations, and documents found in clandestine locations. Such documents are often scanned for automated analysis, further processing, and archiving. Due to the nature of such documents, degraded document images are often hard to read, have low contrast, and are corrupted by various artifacts. We describe a novel approach for the enhancement of such documents based on probabilistic models which increases the contrast, and thus, readability of such documents under various degradations. The enhancement produced by the proposed approach can be viewed under different viewing conditions if desired. The proposed approach was evaluated qualitatively and compared to standard enhancement techniques on a subset of historical documents obtained from the Yad Vashem Holocaust museum. In addition, quantitative performance was evaluated based on synthetically generated data corrupted under various degradation models. Preliminary results demonstrate the effectiveness of the proposed approach.

Cross-mapping clinical notes between hospitals: an application of the LOINC Document Ontology.

PubMed

Li, Li; Morrey, C Paul; Baorto, David

2011-01-01

Standardization of document titles is essential for management as the volume of electronic clinical notes increases. The two campuses of the New York Presbyterian Hospital have over 2,700 distinct document titles. The LOINC Document Ontology (DO) provides a standard for the naming of clinical documents in a multi-axis structure. We have represented the latest LOINC DO structure in the MED, and developed an automated process mapping the clinical documents from both the West (Columbia) and East (Cornell) campuses to the LOINC DO. We find that the LOINC DO can represent the majority of our documents, and about half of the documents map between campuses using the LOINC DO as a reference. We evaluated the possibility of using current LOINC codes in document exchange between different institutions. While there is clear success in the ability of the LOINC DO to represent documents and facilitate exchange we find there are granularity issues.

Automated document analysis system

NASA Astrophysics Data System (ADS)

Black, Jeffrey D.; Dietzel, Robert; Hartnett, David

2002-08-01

A software application has been developed to aid law enforcement and government intelligence gathering organizations in the translation and analysis of foreign language documents with potential intelligence content. The Automated Document Analysis System (ADAS) provides the capability to search (data or text mine) documents in English and the most commonly encountered foreign languages, including Arabic. Hardcopy documents are scanned by a high-speed scanner and are optical character recognized (OCR). Documents obtained in an electronic format bypass the OCR and are copied directly to a working directory. For translation and analysis, the script and the language of the documents are first determined. If the document is not in English, the document is machine translated to English. The documents are searched for keywords and key features in either the native language or translated English. The user can quickly review the document to determine if it has any intelligence content and whether detailed, verbatim human translation is required. The documents and document content are cataloged for potential future analysis. The system allows non-linguists to evaluate foreign language documents and allows for the quick analysis of a large quantity of documents. All document processing can be performed manually or automatically on a single document or a batch of documents.

Categorizing document by fuzzy C-Means and K-nearest neighbors approach

NASA Astrophysics Data System (ADS)

Priandini, Novita; Zaman, Badrus; Purwanti, Endah

2017-08-01

Increasing of technology had made categorizing documents become important. It caused by increasing of number of documents itself. Managing some documents by categorizing is one of Information Retrieval application, because it involve text mining on its process. Whereas, categorization technique could be done both Fuzzy C-Means (FCM) and K-Nearest Neighbors (KNN) method. This experiment would consolidate both methods. The aim of the experiment is increasing performance of document categorize. First, FCM is in order to clustering training documents. Second, KNN is in order to categorize testing document until the output of categorization is shown. Result of the experiment is 14 testing documents retrieve relevantly to its category. Meanwhile 6 of 20 testing documents retrieve irrelevant to its category. Result of system evaluation shows that both precision and recall are 0,7.

Software to Manage the Unmanageable

NASA Technical Reports Server (NTRS)

2005-01-01

In 1995, NASA s Jet Propulsion Laboratory (JPL) contracted Redmond, Washington-based Lucidoc Corporation, to design a technology infrastructure to automate the intersection between policy management and operations management with advanced software that automates document workflow, document status, and uniformity of document layout. JPL had very specific parameters for the software. It expected to store and catalog over 8,000 technical and procedural documents integrated with hundreds of processes. The project ended in 2000, but NASA still uses the resulting highly secure document management system, and Lucidoc has managed to help other organizations, large and small, with integrating document flow and operations management to ensure a compliance-ready culture.

7 CFR 274.5 - Record retention and forms security.

Code of Federal Regulations, 2014 CFR

2014-01-01

... reconciliation process. (c) Accountable documents. (1) EBT cards shall be considered accountable documents. The... validation of inventory controls and records by parties not otherwise involved in maintaining control records...

7 CFR 274.5 - Record retention and forms security.

Code of Federal Regulations, 2013 CFR

2013-01-01

... reconciliation process. (c) Accountable documents. (1) EBT cards shall be considered accountable documents. The... validation of inventory controls and records by parties not otherwise involved in maintaining control records...

7 CFR 274.5 - Record retention and forms security.

Code of Federal Regulations, 2012 CFR

2012-01-01

... reconciliation process. (c) Accountable documents. (1) EBT cards shall be considered accountable documents. The... validation of inventory controls and records by parties not otherwise involved in maintaining control records...

Multibeam Sonar Backscatter Data Acquisition and Processing: Guidelines and Recommendations from the GEOHAB Backscatter Working Group

NASA Astrophysics Data System (ADS)

Heffron, E.; Lurton, X.; Lamarche, G.; Brown, C.; Lucieer, V.; Rice, G.; Schimel, A.; Weber, T.

2015-12-01

Backscatter data acquired with multibeam sonars are now commonly used for the remote geological interpretation of the seabed. The systems hardware, software, and processing methods and tools have grown in numbers and improved over the years, yet many issues linger: there are no standard procedures for acquisition, poor or absent calibration, limited understanding and documentation of processing methods, etc. A workshop organized at the GeoHab (a community of geoscientists and biologists around the topic of marine habitat mapping) annual meeting in 2013 was dedicated to seafloor backscatter data from multibeam sonars and concluded that there was an overwhelming need for better coherence and agreement on the topics of acquisition, processing and interpretation of data. The GeoHab Backscatter Working Group (BSWG) was subsequently created with the purpose of documenting and synthetizing the state-of-the-art in sensors and techniques available today and proposing methods for best practice in the acquisition and processing of backscatter data. Two years later, the resulting document "Backscatter measurements by seafloor-mapping sonars: Guidelines and Recommendations" was completed1. The document provides: An introduction to backscatter measurements by seafloor-mapping sonars; A background on the physical principles of sonar backscatter; A discussion on users' needs from a wide spectrum of community end-users; A review on backscatter measurement; An analysis of best practices in data acquisition; A review of data processing principles with details on present software implementation; and finally A synthesis and key recommendations. This presentation reviews the BSWG mandate, structure, and development of this document. It details the various chapter contents, its recommendations to sonar manufacturers, operators, data processing software developers and end-users and its implication for the marine geology community. 1: Downloadable at https://www.niwa.co.nz/coasts-and-oceans/research-projects/backscatter-measurement-guidelines

The quality of paper-based versus electronic nursing care plan in Australian aged care homes: A documentation audit study.

PubMed

Wang, Ning; Yu, Ping; Hailey, David

2015-08-01

The nursing care plan plays an essential role in supporting care provision in Australian aged care. The implementation of electronic systems in aged care homes was anticipated to improve documentation quality. Standardized nursing terminologies, developed to improve communication and advance the nursing profession, are not required in aged care practice. The language used by nurses in the nursing care plan and the effect of the electronic system on documentation quality in residential aged care need to be investigated. To describe documentation practice for the nursing care plan in Australian residential aged care homes and to compare the quantity and quality of documentation in paper-based and electronic nursing care plans. A nursing documentation audit was conducted in seven residential aged care homes in Australia. One hundred and eleven paper-based and 194 electronic nursing care plans, conveniently selected, were reviewed. The quantity of documentation in a care plan was determined by the number of phrases describing a resident problem and the number of goals and interventions. The quality of documentation was measured using 16 relevant questions in an instrument developed for the study. There was a tendency to omit 'nursing problem' or 'nursing diagnosis' in the nursing process by changing these terms (used in the paper-based care plan) to 'observation' in the electronic version. The electronic nursing care plan documented more signs and symptoms of resident problems and evaluation of care than the paper-based format (48.30 vs. 47.34 out of 60, P<0.01), but had a lower total mean quality score. The electronic care plan contained fewer problem or diagnosis statements, contributing factors and resident outcomes than the paper-based system (P<0.01). Both types of nursing care plan were weak in documenting measurable and concrete resident outcomes. The overall quality of documentation content for the nursing process was no better in the electronic system than in the paper-based system. Omission of the nursing problem or diagnosis from the nursing process may reflect a range of factors behind the practice that need to be understood. Further work is also needed on qualitative aspects of the nurse care plan, nurses' attitudes towards standardized terminologies and the effect of different documentation practice on care quality and resident outcomes. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

NASA-STD-(I)-6016, Standard Materials and Processes Requirements for Spacecraft

NASA Technical Reports Server (NTRS)

Pedley, Michael; Griffin, Dennis

2006-01-01

This document is directed toward Materials and Processes (M&P) used in the design, fabrication, and testing of flight components for all NASA manned, unmanned, robotic, launch vehicle, lander, in-space and surface systems, and spacecraft program/project hardware elements. All flight hardware is covered by the M&P requirements of this document, including vendor designed, off-the-shelf, and vendor furnished items. Materials and processes used in interfacing ground support equipment (GSE); test equipment; hardware processing equipment; hardware packaging; and hardware shipment shall be controlled to prevent damage to or contamination of flight hardware.

Apollo 16 photographic standards documentation

NASA Technical Reports Server (NTRS)

Bourque, P. F.

1972-01-01

The activities of the Photographic Technology Division, and particularly the Photo Science Office, the Precision Processing Laboratory, and the Motion Picture Laboratory, in connection with the scientific photography of the Apollo 16 manned space mission are documented. Described are the preflight activities involved in establishing a standard process for each of the flight films, the manned in which flight films were handled upon arrival at the Manned Spacecraft Center in Houston, Texas, and how the flight films were processed and duplicated. The tone reproduction method of duplication is described. The specific sensitometric and chemical process controls are not included.

Universal donor education and consent: what we know and where we should go.

PubMed

Wehrli, Gay; Sazama, Kathleen

2010-11-01

Each day thousands of blood donors across the country are given educational materials and sign a consent form, thus fulfilling two blood collection accreditation requirements. Very few donors will experience a documented adverse event, although a disproportionate number of these events occur in the youngest donor cohort. The literature reflects this disproportion and suggests mitigation strategies. Studies describe subjective, undocumented donor reactions and decreased donor return rates after a documented or subjective reaction. Additionally, studies have shown donor consent form variability among blood collection facilities and that donor comprehension of the educational materials and consent is limited. There are few standardized donor education materials or consent documents. Current accreditation standards for educational materials are limited to aspects of transfusion-transmitted diseases and for donor consent process and documentation are vague and nonspecific. Recent experiences with young donors and current research compel our community to engage in creating standardized, expanded donor educational materials and standardized donor consent processes and documents. © 2010 American Association of Blood Banks.

Software Tools for In-Situ Documentation of Built Heritage

NASA Astrophysics Data System (ADS)

Smars, P.

2013-07-01

The paper presents open source software tools developed by the author to facilitate in-situ documentation of architectural and archæological heritage. The design choices are exposed and related to a general issue in conservation and documentation: taking decisions about a valuable object under threat . The questions of level of objectivity is central to the three steps of this process. It is our belief that in-situ documentation has to be favoured in this demanding context, full of potential discoveries. The very powerful surveying techniques in rapid development nowadays enhance our vision but often tend to bring back a critical part of the documentation process to the office. The software presented facilitate a direct treatment of the data on the site. Emphasis is given to flexibility, interoperability and simplicity. Key features of the software are listed and illustrated with examples (3D model of Gothic vaults, analysis of the shape of a column, deformation of a wall, direct interaction with AutoCAD).

Multisource data fusion for documenting archaeological sites

NASA Astrophysics Data System (ADS)

Knyaz, Vladimir; Chibunichev, Alexander; Zhuravlev, Denis

2017-10-01

The quality of archaeological sites documenting is of great importance for cultural heritage preserving and investigating. The progress in developing new techniques and systems for data acquisition and processing creates an excellent basis for achieving a new quality of archaeological sites documenting and visualization. archaeological data has some specific features which have to be taken into account when acquiring, processing and managing. First of all, it is a needed to gather as full as possible information about findings providing no loss of information and no damage to artifacts. Remote sensing technologies are the most adequate and powerful means which satisfy this requirement. An approach to archaeological data acquiring and fusion based on remote sensing is proposed. It combines a set of photogrammetric techniques for obtaining geometrical and visual information at different scales and detailing and a pipeline for archaeological data documenting, structuring, fusion, and analysis. The proposed approach is applied for documenting of Bosporus archaeological expedition of Russian State Historical Museum.

Method and apparatus for filtering visual documents

NASA Technical Reports Server (NTRS)

Rorvig, Mark E. (Inventor); Shelton, Robert O. (Inventor)

1993-01-01

A method and apparatus for producing an abstract or condensed version of a visual document is presented. The frames comprising the visual document are first sampled to reduce the number of frames required for processing. The frames are then subjected to a structural decomposition process that reduces all information in each frame to a set of values. These values are in turn normalized and further combined to produce only one information content value per frame. The information content values of these frames are then compared to a selected distribution cutoff point. This effectively selects those values at the tails of a normal distribution, thus filtering key frames from their surrounding frames. The value for each frame is then compared with the value from the previous frame, and the respective frame is finally stored only if the values are significantly different. The method filters or compresses a visual document with a reduction in digital storage on the ratio of up to 700 to 1 or more, depending on the content of the visual document being filtered.

Feature extraction for document text using Latent Dirichlet Allocation

NASA Astrophysics Data System (ADS)

Prihatini, P. M.; Suryawan, I. K.; Mandia, IN

2018-01-01

Feature extraction is one of stages in the information retrieval system that used to extract the unique feature values of a text document. The process of feature extraction can be done by several methods, one of which is Latent Dirichlet Allocation. However, researches related to text feature extraction using Latent Dirichlet Allocation method are rarely found for Indonesian text. Therefore, through this research, a text feature extraction will be implemented for Indonesian text. The research method consists of data acquisition, text pre-processing, initialization, topic sampling and evaluation. The evaluation is done by comparing Precision, Recall and F-Measure value between Latent Dirichlet Allocation and Term Frequency Inverse Document Frequency KMeans which commonly used for feature extraction. The evaluation results show that Precision, Recall and F-Measure value of Latent Dirichlet Allocation method is higher than Term Frequency Inverse Document Frequency KMeans method. This shows that Latent Dirichlet Allocation method is able to extract features and cluster Indonesian text better than Term Frequency Inverse Document Frequency KMeans method.

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ermi, A.M.

1997-05-01

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less

Waste receiving and processing plant control system; system design description

DOE Office of Scientific and Technical Information (OSTI.GOV)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed asmore » separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.« less

Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

Operational excellence (six sigma) philosophy: Application to software quality assurance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lackner, M.

1997-11-01

This report contains viewgraphs on operational excellence philosophy of six sigma applied to software quality assurance. This report outlines the following: goal of six sigma; six sigma tools; manufacturing vs administrative processes; Software quality assurance document inspections; map software quality assurance requirements document; failure mode effects analysis for requirements document; measuring the right response variables; and questions.