Sample records for decamethylytterbocene additional examples

  1. Example-based learning: comparing the effects of additionally providing three different integrative learning activities on physiotherapy intervention knowledge.

    PubMed

    Dyer, Joseph-Omer; Hudon, Anne; Montpetit-Tourangeau, Katherine; Charlin, Bernard; Mamede, Sílvia; van Gog, Tamara

    2015-03-07

    Example-based learning using worked examples can foster clinical reasoning. Worked examples are instructional tools that learners can use to study the steps needed to solve a problem. Studying worked examples paired with completion examples promotes acquisition of problem-solving skills more than studying worked examples alone. Completion examples are worked examples in which some of the solution steps remain unsolved for learners to complete. Providing learners engaged in example-based learning with self-explanation prompts has been shown to foster increased meaningful learning compared to providing no self-explanation prompts. Concept mapping and concept map study are other instructional activities known to promote meaningful learning. This study compares the effects of self-explaining, completing a concept map and studying a concept map on conceptual knowledge and problem-solving skills among novice learners engaged in example-based learning. Ninety-one physiotherapy students were randomized into three conditions. They performed a pre-test and a post-test to evaluate their gains in conceptual knowledge and problem-solving skills (transfer performance) in intervention selection. They studied three pairs of worked/completion examples in a digital learning environment. Worked examples consisted of a written reasoning process for selecting an optimal physiotherapy intervention for a patient. The completion examples were partially worked out, with the last few problem-solving steps left blank for students to complete. The students then had to engage in additional self-explanation, concept map completion or model concept map study in order to synthesize and deepen their knowledge of the key concepts and problem-solving steps. Pre-test performance did not differ among conditions. Post-test conceptual knowledge was higher (P < .001) in the concept map study condition (68.8 ± 21.8%) compared to the concept map completion (52.8 ± 17.0%) and self

  2. Taxonomic reassessment of the ichnogenus Beaconichnus and additional examples from the Carboniferous of Kansas, U.S.A.

    USGS Publications Warehouse

    Buatois, Luis A.; Mángano, M. Gabriela; Maples, Christopher G.; Lanier, William P.

    1996-01-01

    The ichnogenus Beaconichnus (Gevers 1973), an arthropod trace fossil, includes very different forms that comprise five ichnospecies, namely B. darwi‐nunt (Gevers 1971), B. gouldi (Gevers 1971), B. ahtarcticum(Gevers 1971), B. giganteum Gevers and Twomey 1982, and B. wrrighti Gevers and Twomey 1982. The original diagnosis of Beaconichnus is rather vague and potentially may accomodate virtually every arthropod trackway described from the fossil record. In view of these problems, the validity of Beaconichnus is reassessed and each of its ichnospecies is reviewed. We conclude that B. darwinum is a junior synonym of Diplopodichnus biformis Brady 1947; B. antarcticum should be regarded as Palmich‐niunt antarcticum; and B. wrighti is a nomen nudum. Additionally, we agree with previous proposals in considering B. gouldi as the senior synonym of B. giganteum, and including it in Diplichnites Dawson 1873. Therefore, we suggest that the ichnogenus Beaconichnus is best disregarded. Additionally, we describe specimens collected from the Late Carboniferous Tonganoxie Sandstone Member (Stranger Formation) of eastern Kansas, ascribed herein to Diplopodichnus biformis and Diplichnites gouldi, which include examples of intergradations between both ichnotaxa, and provide synonymy lists for both ichnospecies.

  3. Kleptothermy: an additional category of thermoregulation, and a possible example in sea kraits (Laticauda laticaudata, Serpentes).

    PubMed

    Brischoux, François; Bonnet, Xavier; Shine, Richard

    2009-12-23

    Lacking the capacity for thermogenesis, most ectotherms inhabiting thermally heterogeneous environments rely instead upon exploiting that ambient heterogeneity. In many cases they maintain body temperatures within a narrow range despite massive spatial and temporal variation in ambient conditions. Reliance on diverse thermal opportunities is reflected in specific terms for organisms that bask in sunlight to regulate their temperature (heliotherms), or that press their bodies against warm substrates to facilitate heat flow (thigmotherms), or that rely on large body mass to maintain thermal constancy (gigantothermy). We propose an additional category of thermoregulators: kleptotherms, which regulate their own temperature by 'stealing' heat from other organisms. This concept involves two major conditions: the thermal heterogeneity created by the presence of a warm organism in a cool environment and the selective use of that heterogeneity by another animal to maintain body temperatures at higher (and more stable) levels than would be possible elsewhere in the local area. Kleptothermy occurs in endotherms also, but is usually reciprocal (rather than unilateral as in ectotherms). Thermal monitoring on a small tropical island documents a possible example of kleptothermy, based on high stable temperatures of a sea snake (Laticauda laticaudata) inside a burrow occupied by seabirds.

  4. More examples of chimpanzees teaching.

    PubMed

    Scheel, Matthew H; Shaw, Heidi L; Gardner, R Allen

    2015-01-01

    Darwinism is a principle of biological continuity. This commentary argues against any claim of discontinuity between humans and other animals that must be based on absence of evidence. Instead, we offer additional examples of active teaching by chimpanzees.

  5. Kleptothermy: an additional category of thermoregulation, and a possible example in sea kraits (Laticauda laticaudata, Serpentes)

    PubMed Central

    Brischoux, François; Bonnet, Xavier; Shine, Richard

    2009-01-01

    Lacking the capacity for thermogenesis, most ectotherms inhabiting thermally heterogeneous environments rely instead upon exploiting that ambient heterogeneity. In many cases they maintain body temperatures within a narrow range despite massive spatial and temporal variation in ambient conditions. Reliance on diverse thermal opportunities is reflected in specific terms for organisms that bask in sunlight to regulate their temperature (heliotherms), or that press their bodies against warm substrates to facilitate heat flow (thigmotherms), or that rely on large body mass to maintain thermal constancy (gigantothermy). We propose an additional category of thermoregulators: kleptotherms, which regulate their own temperature by ‘stealing’ heat from other organisms. This concept involves two major conditions: the thermal heterogeneity created by the presence of a warm organism in a cool environment and the selective use of that heterogeneity by another animal to maintain body temperatures at higher (and more stable) levels than would be possible elsewhere in the local area. Kleptothermy occurs in endotherms also, but is usually reciprocal (rather than unilateral as in ectotherms). Thermal monitoring on a small tropical island documents a possible example of kleptothermy, based on high stable temperatures of a sea snake (Laticauda laticaudata) inside a burrow occupied by seabirds. PMID:19656862

  6. WalkThrough Example Procedures for MAMA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ruggiero, Christy E.; Gaschen, Brian Keith; Bloch, Jeffrey Joseph

    This documentation is a growing set of walk through examples of analyses using the MAMA V2.0 software. It does not cover all the features or possibilities with the MAMA software, but will address using many of the basic analysis tools to quantify particle size and shape in an image. This document will continue to evolve as additional procedures and examples are added. The starting assumption is that the MAMA software has been successfully installed.

  7. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  8. 29 CFR 784.141 - Examples of nonexempt employees.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Examples of nonexempt employees. 784.141 Section 784.141... Examples of nonexempt employees. An employer who engaged in operations specified in section 13(b)(4) which... business there will ordinarily be, in addition to the employees employed in such named operations, other...

  9. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  10. The use and generation of illustrative examples in computer-based instructional systems

    NASA Technical Reports Server (NTRS)

    Selig, William John; Johannes, James D.

    1987-01-01

    A method is proposed whereby the underlying domain knowledge is represented such that illustrative examples may be generated on demand. This method has the advantage that the generated example can follow changes in the domain in addition to allowing automatic customization of the example to the individual.

  11. Building a Competitive Edge with Additive Manufacturing

    DTIC Science & Technology

    2013-02-14

    construct ceramic molds for complex metal parts using a 3D printing technique. They estimate the new 6 technique could eliminate all of the...processes. They include 3D printing and Additive Beam Techniques.15 Most Additive Manufacturing techniques are specific to certain classes of materials...9 Example Additive Manufacturing Techniques16 3D Printing Additive Beam Stereolithography (SLA) Direct Metal Laser Sintering (DMLS

  12. The Evolution of Children's Mental Addition.

    ERIC Educational Resources Information Center

    Ashcraft, Mark H.; Hamann, Mary Sue

    Students in grades 1, 4, 7, and 10 were tested in a two-part investigation of simple and complex mental addition (with college students as a reference point). One session involved a normal reaction time task in which children made true/false judgments about a series of addition examples. The other session involved a verbal protocol interview, the…

  13. Additive schemes for certain operator-differential equations

    NASA Astrophysics Data System (ADS)

    Vabishchevich, P. N.

    2010-12-01

    Unconditionally stable finite difference schemes for the time approximation of first-order operator-differential systems with self-adjoint operators are constructed. Such systems arise in many applied problems, for example, in connection with nonstationary problems for the system of Stokes (Navier-Stokes) equations. Stability conditions in the corresponding Hilbert spaces for two-level weighted operator-difference schemes are obtained. Additive (splitting) schemes are proposed that involve the solution of simple problems at each time step. The results are used to construct splitting schemes with respect to spatial variables for nonstationary Navier-Stokes equations for incompressible fluid. The capabilities of additive schemes are illustrated using a two-dimensional model problem as an example.

  14. Global concentration additivity and prediction of mixture toxicities, taking nitrobenzene derivatives as an example.

    PubMed

    Li, Tong; Liu, Shu-Shen; Qu, Rui; Liu, Hai-Ling

    2017-10-01

    The toxicity of a mixture depends not only on the mixture concentration level but also on the mixture ratio. For a multiple-component mixture (MCM) system with a definite chemical composition, the mixture toxicity can be predicted only if the global concentration additivity (GCA) is validated. The so-called GCA means that the toxicity of any mixture in the MCM system is the concentration additive, regardless of what its mixture ratio and concentration level. However, many mixture toxicity reports have usually employed one mixture ratio (such as the EC 50 ratio), the equivalent effect concentration ratio (EECR) design, to specify several mixtures. EECR mixtures cannot simulate the concentration diversity and mixture ratio diversity of mixtures in the real environment, and it is impossible to validate the GCA. Therefore, in this paper, the uniform design ray (UD-Ray) was used to select nine mixture ratios (rays) in the mixture system of five nitrobenzene derivatives (NBDs). The representative UD-Ray mixtures can effectively and rationally describe the diversity in the NBD mixture system. The toxicities of the mixtures to Vibrio qinghaiensis sp.-Q67 were determined by the microplate toxicity analysis (MTA). For each UD-Ray mixture, the concentration addition (CA) model was used to validate whether the mixture toxicity is additive. All of the UD-Ray mixtures of five NBDs are global concentration additive. Afterwards, the CA is employed to predict the toxicities of the external mixtures from three EECR mixture rays with the NOEC, EC 30 , and EC 70 ratios. The predictive toxicities are in good agreement with the experimental toxicities, which testifies to the predictability of the mixture toxicity of the NBDs. Copyright © 2017. Published by Elsevier Inc.

  15. Chemical Mixture Risk Assessment Additivity-Based Approaches

    EPA Science Inventory

    Powerpoint presentation includes additivity-based chemical mixture risk assessment methods. Basic concepts, theory and example calculations are included. Several slides discuss the use of "common adverse outcomes" in analyzing phthalate mixtures.

  16. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F { X ( t ), t } where F (·,·) is an unknown regression function and X ( t ) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F (·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X ( t ) is a signal from diffusion tensor imaging at position, t , along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  17. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  18. Additional Guidance for Evaluating and Calculating Degradation Kinetics in Environmental Media

    EPA Pesticide Factsheets

    EFED compiled examples where the PestDF (version 0.8.4), the tool used most commonly by USEPA to conduct kinetic analysis following the NAFTA guidance, results required additional interpretation. Here are some of these examples.

  19. 26 CFR 1.860-3 - Interest and additions to tax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... (CONTINUED) INCOME TAXES (CONTINUED) Real Estate Investment Trusts § 1.860-3 Interest and additions to tax... examples: Example 1. Corporation X is a real estate investment trust that files its income tax return on a... 1977, X reports real estate investment trust taxable income (computed without the dividends paid...

  20. 26 CFR 1.860-3 - Interest and additions to tax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... (CONTINUED) INCOME TAXES (CONTINUED) Real Estate Investment Trusts § 1.860-3 Interest and additions to tax... examples: Example 1. Corporation X is a real estate investment trust that files its income tax return on a... 1977, X reports real estate investment trust taxable income (computed without the dividends paid...

  1. 26 CFR 1.860-3 - Interest and additions to tax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... (CONTINUED) INCOME TAXES (CONTINUED) Real Estate Investment Trusts § 1.860-3 Interest and additions to tax... examples: Example 1. Corporation X is a real estate investment trust that files its income tax return on a... 1977, X reports real estate investment trust taxable income (computed without the dividends paid...

  2. 26 CFR 1.860-3 - Interest and additions to tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... (CONTINUED) INCOME TAXES Real Estate Investment Trusts § 1.860-3 Interest and additions to tax. (a) In... examples: Example 1. Corporation X is a real estate investment trust that files its income tax return on a... 1977, X reports real estate investment trust taxable income (computed without the dividends paid...

  3. 26 CFR 1.860-3 - Interest and additions to tax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... (CONTINUED) INCOME TAXES (CONTINUED) Real Estate Investment Trusts § 1.860-3 Interest and additions to tax... examples: Example 1. Corporation X is a real estate investment trust that files its income tax return on a... 1977, X reports real estate investment trust taxable income (computed without the dividends paid...

  4. 48 CFR 22.1003-5 - Some examples of contracts covered.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CFR 4.130 for additional examples): (a) Motor pool operation, parking, taxicab, and ambulance services...) Certain specialized services requiring specific skills, such as drafting, illustrating, graphic arts..., engines, electrical motors, vehicles, and electronic, office and related business and construction...

  5. Learning communication from erroneous video-based examples: A double-blind randomised controlled trial.

    PubMed

    Schmitz, Felix Michael; Schnabel, Kai Philipp; Stricker, Daniel; Fischer, Martin Rudolf; Guttormsen, Sissel

    2017-06-01

    Appropriate training strategies are required to equip undergraduate healthcare students to benefit from communication training with simulated patients. This study examines the learning effects of different formats of video-based worked examples on initial communication skills. First-year nursing students (N=36) were randomly assigned to one of two experimental groups (correct v. erroneous examples) or to the control group (no examples). All the groups were provided an identical introduction to learning materials on breaking bad news; the experimental groups also received a set of video-based worked examples. Each example was accompanied by a self-explanation prompt (considering the example's correctness) and elaborated feedback (the true explanation). Participants presented with erroneous examples broke bad news to a simulated patient significantly more appropriately than students in the control group. Additionally, they tended to outperform participants who had correct examples, while participants presented with correct examples tended to outperform the control group. The worked example effect was successfully adapted for learning in the provider-patient communication domain. Implementing video-based worked examples with self-explanation prompts and feedback can be an effective strategy to prepare students for their training with simulated patients, especially when examples are erroneous. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. 51. BF corridor, (example of older building meeting with new ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. BF corridor, (example of older building meeting with new building addition) from outside room BF-6, basement level, building 500, looking south - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  7. Scenarios for Motivating the Learning of Variability: An Example in Finances

    ERIC Educational Resources Information Center

    Cordani, Lisbeth K.

    2013-01-01

    This article explores an example in finances in order to motivate the random variable learning to the very beginners in statistics. In addition, it offers a relationship between standard deviation and range in a very specific situation.

  8. 12 CFR 222.2 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Examples. 222.2 Section 222.2 Banks and Banking... (REGULATION V) General Provisions § 222.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a...

  9. 12 CFR 334.2 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Examples. 334.2 Section 334.2 Banks and Banking... General Provisions § 334.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph...

  10. 12 CFR 41.2 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Examples. 41.2 Section 41.2 Banks and Banking... Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph illustrate only the issue described in the...

  11. 12 CFR 571.2 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Examples. 571.2 Section 571.2 Banks and Banking... Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph illustrate only the issue described in the...

  12. 12 CFR 717.2 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Examples. 717.2 Section 717.2 Banks and Banking... Provisions § 717.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph illustrate only the...

  13. An Example of Using History of Mathematics in Classes

    ERIC Educational Resources Information Center

    Goktepe, Sevda; Ozdemir, Ahmet Sukru

    2013-01-01

    In recent years, the topic of integrating history to mathematics lessons in teaching-learning processes has been frequently discussed among researchers. The main aim of this study is to present an example activity which enriched with history of mathematics and to take the views of students about teaching course in this way. In addition, to create…

  14. Observational evidence and strength of evidence domains: case examples

    PubMed Central

    2014-01-01

    Background Systematic reviews of healthcare interventions most often focus on randomized controlled trials (RCTs). However, certain circumstances warrant consideration of observational evidence, and such studies are increasingly being included as evidence in systematic reviews. Methods To illustrate the use of observational evidence, we present case examples of systematic reviews in which observational evidence was considered as well as case examples of individual observational studies, and how they demonstrate various strength of evidence domains in accordance with current Agency for Healthcare Research and Quality (AHRQ) Evidence-based Practice Center (EPC) methods guidance. Results In the presented examples, observational evidence is used when RCTs are infeasible or raise ethical concerns, lack generalizability, or provide insufficient data. Individual study case examples highlight how observational evidence may fulfill required strength of evidence domains, such as study limitations (reduced risk of selection, detection, performance, and attrition); directness; consistency; precision; and reporting bias (publication, selective outcome reporting, and selective analysis reporting), as well as additional domains of dose-response association, plausible confounding that would decrease the observed effect, and strength of association (magnitude of effect). Conclusions The cases highlighted in this paper demonstrate how observational studies may provide moderate to (rarely) high strength evidence in systematic reviews. PMID:24758494

  15. 17 CFR 248.102 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Examples. 248.102 Section 248... AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this subpart are not exclusive. The examples in this subpart provide guidance concerning the rules' application...

  16. 29 CFR 4022.104 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Examples. 4022.104 Section 4022.104 Labor Regulations... Future Periods After Death § 4022.104 Examples. The following examples show how the rules in §§ 4022.101.... (1) Example 1: where surviving beneficiary predeceases participant. Ellen died before Charlie. As...

  17. 16 CFR 680.2 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

  18. 16 CFR 680.2 - Examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

  19. 16 CFR 680.2 - Examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

  20. 16 CFR 680.2 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

  1. 16 CFR 680.2 - Examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

  2. Additive Manufacturing in the Marine Corps

    DTIC Science & Technology

    2015-06-01

    commonly referred to as 3D printing. This thesis answers the question of how additive manufacturing can improve the effectiveness of Marine Corps...analysis of current and future 3D -printing processes, examination of several civilian and military examples, and examination of the impact across...fully integrating 3D printers, such as the lack of certification and qualification standards, unreliable end product results, and determining ownership

  3. 29 CFR 4022.95 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Examples. 4022.95 Section 4022.95 Labor Regulations... IN TERMINATED SINGLE-EMPLOYER PLANS Certain Payments Owed Upon Death § 4022.95 Examples. The following examples show how the rules in §§ 4022.91 through 4022.94 apply. For examples on how these rules...

  4. 42 CFR 408.26 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Examples. 408.26 Section 408.26 Public Health... PREMIUMS FOR SUPPLEMENTARY MEDICAL INSURANCE Amount of Monthly Premiums § 408.26 Examples. Example 1. Mr. J... 10 percent greater than if he had enrolled in his initial enrollment period. Example 2. Mr. V, who...

  5. CADDIS Volume 3. Examples and Applications: Analytical Examples

    EPA Pesticide Factsheets

    Examples illustrating the use of statistical analysis to support different types of evidence, stream temperature, temperature inferred from macroinverterbate, macroinvertebrate responses, zinc concentrations, observed trait characteristics.

  6. Multilevel Modeling and School Psychology: A Review and Practical Example

    ERIC Educational Resources Information Center

    Graves, Scott L., Jr.; Frohwerk, April

    2009-01-01

    The purpose of this article is to provide an overview of the state of multilevel modeling in the field of school psychology. The authors provide a systematic assessment of published research of multilevel modeling studies in 5 journals devoted to the research and practice of school psychology. In addition, a practical example from the nationally…

  7. Coding Teaching for Simultaneity and Connections: Examining Teachers' Part-Whole Additive Relations Instruction

    ERIC Educational Resources Information Center

    Ekdahl, Anna-Lena; Venkat, Hamsa; Runesson, Ulla

    2016-01-01

    In this article, we present a coding framework based on simultaneity and connections. The coding focuses on microlevel attention to three aspects of simultaneity and connections: between representations, within examples, and between examples. Criteria for coding that we viewed as mathematically important within part-whole additive relations…

  8. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; ...

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  9. Aristotle's Example: The Rhetorical Induction.

    ERIC Educational Resources Information Center

    Benoit, William Lyon

    1980-01-01

    Examines the concept of example in Aristotle's inventional theory. Rejects recent claims that the example reasons from part to part, without a mediating generalization, and then explicates Aristotle's view of the example. (JMF)

  10. Generic Example Proving Criteria for All

    ERIC Educational Resources Information Center

    Yopp, David; Ely, Rob; Johnson­-Leung, Jennifer

    2015-01-01

    We review literature that discusses generic example proving and highlight ambiguities that pervade our research community's discourse about generic example arguments. We distinguish between pedagogical advice for choosing good examples that can serve as generic examples when teaching and advice for developing generic example arguments. We provide…

  11. Friction Stir Additive Manufacturing: Route to High Structural Performance

    NASA Astrophysics Data System (ADS)

    Palanivel, S.; Sidhar, H.; Mishra, R. S.

    2015-03-01

    Aerospace and automotive industries provide the next big opportunities for additive manufacturing. Currently, the additive industry is confronted with four major challenges that have been identified in this article. These challenges need to be addressed for the additive technologies to march into new frontiers and create additional markets. Specific potential success in the transportation sectors is dependent on the ability to manufacture complicated structures with high performance. Most of the techniques used for metal-based additive manufacturing are fusion based because of their ability to fulfill the computer-aided design to component vision. Although these techniques aid in fabrication of complex shapes, achieving high structural performance is a key problem due to the liquid-solid phase transformation. In this article, friction stir additive manufacturing (FSAM) is shown as a potential solid-state process for attaining high-performance lightweight alloys for simpler geometrical applications. To illustrate FSAM as a high-performance route, manufactured builds of Mg-4Y-3Nd and AA5083 are shown as examples. In the Mg-based alloy, an average hardness of 120 HV was achieved in the built structure and was significantly higher than that of the base material (97 HV). Similarly for the Al-based alloy, compared with the base hardness of 88 HV, the average built hardness was 104 HV. A potential application of FSAM is illustrated by taking an example of a simple stiffener assembly.

  12. 26 CFR 1.826-7 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Examples. 1.826-7 Section 1.826-7 Internal....826-7 Examples. The application of section 826 may be illustrated by the following examples: Example 1... percent of 8 exceeds 25 percent of 0), may remain in such account beyond the taxable year 1968. Example 2...

  13. The Columbia Debris Loan Program; Examples of Microscopic Analysis

    NASA Technical Reports Server (NTRS)

    Russell, Rick; Thurston, Scott; Smith, Stephen; Marder, Arnold; Steckel, Gary

    2006-01-01

    Following the tragic loss of the Space Shuttle Columbia NASA formed The Columbia Recovery Office (CRO). The CRO was initially formed at the Johnson Space Center after the conclusion of recovery operations on May 1,2003 and then transferred .to the Kennedy Space Center on October 6,2003 and renamed The Columbia Recovery Office and Preservation. An integral part of the preservation project was the development of a process to loan Columbia debris to qualified researchers and technical educators. The purposes of this program include aiding in the advancement of advanced spacecraft design and flight safety development, the advancement of the study of hypersonic re-entry to enhance ground safety, to train and instruct accident investigators and to establish an enduring legacy for Space Shuttle Columbia and her crew. Along with a summary of the debris loan process examples of microscopic analysis of Columbia debris items will be presented. The first example will be from the reconstruction following the STS- 107 accident and how the Materials and Proessteesa m used microscopic analysis to confirm the accident scenario. Additionally, three examples of microstructural results from the debris loan process from NASA internal, academia and private industry will be presented.

  14. 48 CFR 9.508 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Examples. 9.508 Section 9... CONTRACTOR QUALIFICATIONS Organizational and Consultant Conflicts of Interest 9.508 Examples. The examples in... officer apply the general rules in 9.505 to individual contract situations. (a) Company A agrees to...

  15. 17 CFR 248.102 - Examples.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P, S-AM, AND S-ID Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples...

  16. 17 CFR 248.102 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this...

  17. 17 CFR 248.102 - Examples.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this...

  18. 17 CFR 248.102 - Examples.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this...

  19. VARIABLE SELECTION IN NONPARAMETRIC ADDITIVE MODELS

    PubMed Central

    Huang, Jian; Horowitz, Joel L.; Wei, Fengrong

    2010-01-01

    We consider a nonparametric additive model of a conditional mean function in which the number of variables and additive components may be larger than the sample size but the number of nonzero additive components is “small” relative to the sample size. The statistical problem is to determine which additive components are nonzero. The additive components are approximated by truncated series expansions with B-spline bases. With this approximation, the problem of component selection becomes that of selecting the groups of coefficients in the expansion. We apply the adaptive group Lasso to select nonzero components, using the group Lasso to obtain an initial estimator and reduce the dimension of the problem. We give conditions under which the group Lasso selects a model whose number of components is comparable with the underlying model, and the adaptive group Lasso selects the nonzero components correctly with probability approaching one as the sample size increases and achieves the optimal rate of convergence. The results of Monte Carlo experiments show that the adaptive group Lasso procedure works well with samples of moderate size. A data example is used to illustrate the application of the proposed method. PMID:21127739

  20. An Overview on Additive Manufacturing of Polymers

    NASA Astrophysics Data System (ADS)

    Jasiuk, Iwona; Abueidda, Diab W.; Kozuch, Christopher; Pang, Siyuan; Su, Frances Y.; McKittrick, Joanna

    2018-03-01

    We present an overview on additive manufacturing (AM), also called three-dimensional printing, with a focus on polymers. First, we introduce the AM concept. Next, we outline several AM processes, including their advantages and limitations, and list common polymers that are used in commercial printers. Then, we state various AM applications and present two examples. We conclude with a global view of the AM field, its challenges, and future directions.

  1. Executive Functions as Moderators of the Worked Example Effect: When Shifting Is More Important than Working Memory Capacity

    ERIC Educational Resources Information Center

    Schwaighofer, Matthias; Bühner, Markus; Fischer, Frank

    2016-01-01

    Worked examples have proven to be effective for knowledge acquisition compared with problem solving, particularly when prior knowledge is low (e.g., Kalyuga, 2007). However, in addition to prior knowledge, executive functions and fluid intelligence might be potential moderators of the effectiveness of worked examples. The present study examines…

  2. Bioinformatics by Example: From Sequence to Target

    NASA Astrophysics Data System (ADS)

    Kossida, Sophia; Tahri, Nadia; Daizadeh, Iraj

    2002-12-01

    With the completion of the human genome, and the imminent completion of other large-scale sequencing and structure-determination projects, computer-assisted bioscience is aimed to become the new paradigm for conducting basic and applied research. The presence of these additional bioinformatics tools stirs great anxiety for experimental researchers (as well as for pedagogues), since they are now faced with a wider and deeper knowledge of differing disciplines (biology, chemistry, physics, mathematics, and computer science). This review targets those individuals who are interested in using computational methods in their teaching or research. By analyzing a real-life, pharmaceutical, multicomponent, target-based example the reader will experience this fascinating new discipline.

  3. 26 CFR 20.2013-6 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 14 2011-04-01 2010-04-01 true Examples. 20.2013-6 Section 20.2013-6 Internal...; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Credits Against Tax § 20.2013-6 Examples. The application of §§ 20.2013-1 to 20.2013-5 may be further illustrated by the following examples: Example (1). (a) A...

  4. 26 CFR 20.2013-6 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Examples. 20.2013-6 Section 20.2013-6 Internal...; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Credits Against Tax § 20.2013-6 Examples. The application of §§ 20.2013-1 to 20.2013-5 may be further illustrated by the following examples: Example (1). (a) A...

  5. 26 CFR 7.465-5 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Examples. 7.465-5 Section 7.465-5 Internal... INCOME TAX REGULATIONS UNDER THE TAX REFORM ACT OF 1976 § 7.465-5 Examples. The provisions of § 7.465-1 and § 7.465-2 may be illustrated by the following examples: Example (1). J and K, as equal partners...

  6. Phosphorus-containing food additives and the accuracy of nutrient databases: implications for renal patients.

    PubMed

    Sullivan, Catherine M; Leon, Janeen B; Sehgal, Ashwini R

    2007-09-01

    Phosphorus-containing additives are increasingly being added to food products. We sought to determine the potential impact of these additives. We focused on chicken products as an example. We purchased a variety of chicken products, prepared them according to package directions, and performed laboratory analyses to determine their actual phosphorus content. We used ESHA Food Processor SQL Software (version 9.8, ESHA Research, Salem, OR) to determine the expected phosphorus content of each product. Of 38 chicken products, 35 (92%) had phosphorus-containing additives listed among their ingredients. For every category of chicken products containing additives, the actual phosphorus content was greater than the content expected from nutrient database. For example, actual phosphorus content exceeded expected phosphorus content by an average of 84 mg/100 g for breaded breast strips. There was also a great deal of variation within each category. For example, the difference between actual and expected phosphorus content ranged from 59-165 mg/100 g for breast patties. Two 100-g servings of additive-containing products contained, on average, 440 mg of phosphorus, or about half the total daily recommended intake for dialysis patients. Phosphorus-containing additives significantly increase the amount of phosphorus in chicken products. Available nutrient databases do not reflect this higher phosphorus content, and the variation between similar products makes it impossible for patients and dietitians to accurately estimate phosphorus content. We recommend that dialysis patients limit their intake of additive-containing products, and that the phosphorus content of food products be included on nutrition facts labels.

  7. PHOSPHORUS CONTAINING FOOD ADDITIVES AND THE ACCURACY OF NUTRIENT DATABASES: IMPLICATIONS FOR RENAL PATIENTS

    PubMed Central

    Sullivan, Catherine M.; Leon, Janeen B.; Sehgal, Ashwini R.

    2007-01-01

    Objective Phosphorus containing additives are increasingly added to food products. We sought to determine the potential impact of these additives. We focused on chicken products as an example. Methods We purchased a variety of chicken products, prepared them according to package directions, and performed laboratory analyses to determine their actual phosphorus content. We used ESHA Food Processor SQL Software to determine the expected phosphorus content of each product. Results Of 38 chicken products, 35 (92%) had phosphorus containing additives listed among their ingredients. For every category of chicken products containing additives, the actual phosphorus content was greater than the content expected from nutrient database. For example, actual phosphorus content exceeded expected phosphorus content by an average of 84 mg/100g for breaded breast strips. There was also a great deal of variation within each category. For example, the difference between actual and expected phosphorus content ranged from 59 to 165 mg/100g for breast patties. Two 100 g servings of additive containing products contain an average of 440 mg of phosphorus, or about half the total daily recommended intake for dialysis patients. Conclusion Phosphorus containing additives significantly increase the amount of phosphorus in chicken products. Available nutrient databases do not reflect this higher phosphorus content, and the variation between similar products makes it impossible for patients and dietitians to accurately estimate phosphorus content. We recommend that dialysis patients limit their intake of additive containing products and that the phosphorus content of food products be included on nutrition facts labels. PMID:17720105

  8. Example Elaboration as a Neglected Instructional Strategy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Girill, T R

    Over the last decade an unfolding cognitive-psychology research program on how learners use examples to develop effective problem solving expertise has yielded well-established empirical findings. Chi et al., Renkl, Reimann, and Neubert (in various papers) have confirmed statistically significant differences in how good and poor learners inferentially elaborate (self explain) example steps as they study. Such example elaboration is highly relevant to software documentation and training, yet largely neglected in the current literature. This paper summarizes the neglected research on example use and puts its neglect in a disciplinary perspective. The author then shows that differences in support for examplemore » elaboration in commercial software documentation reveal previously over looked usability issues. These issues involve example summaries, using goals and goal structures to reinforce example elaborations, and prompting readers to recognize the role of example parts. Secondly, I show how these same example elaboration techniques can build cognitive maturity among underperforming high school students who study technical writing. Principle based elaborations, condition elaborations, and role recognition of example steps all have their place in innovative, high school level, technical writing exercises, and all promote far transfer problem solving. Finally, I use these studies to clarify the constructivist debate over what writers and readers contribute to text meaning. I argue that writers can influence how readers elaborate on examples, and that because of the great empirical differences in example study effectiveness (and reader choices) writers should do what they can (through within text design features) to encourage readers to elaborate examples in the most successful ways. Example elaboration is a uniquely effective way to learn from worked technical examples. This paper summarizes years of research that clarifies example elaboration. I then show how

  9. 48 CFR 25.504 - Evaluation Examples.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Evaluation Examples. 25... PROGRAMS FOREIGN ACQUISITION Evaluating Foreign Offers-Supply Contracts 25.504 Evaluation Examples. The following examples illustrate the application of the evaluation procedures in 25.502 and 25.503. The...

  10. 48 CFR 225.504 - Evaluation examples.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Evaluation examples. 225.504 Section 225.504 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... 225.504 Evaluation examples. For examples that illustrate the evaluation procedures in 225.502(c)(ii...

  11. 26 CFR 1.851-5 - Examples.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

  12. 26 CFR 1.851-5 - Examples.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

  13. 26 CFR 1.851-5 - Examples.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

  14. 26 CFR 1.851-5 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

  15. 48 CFR 225.504 - Evaluation examples.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Evaluation examples. 225..., DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Evaluating Foreign Offers-Supply Contracts 225.504 Evaluation examples. For examples that illustrate the evaluation procedures in 225.502(c)(ii...

  16. 48 CFR 25.504 - Evaluation Examples.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... PROGRAMS FOREIGN ACQUISITION Evaluating Foreign Offers-Supply Contracts 25.504 Evaluation Examples. The... examples assume that the contracting officer has eliminated all offers that are unacceptable for reasons... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Evaluation Examples. 25...

  17. Differentiating Literacy Instruction for Digital Learners: The Effect of Multimedia Think-Aloud Worked Examples on Adolescent Analytical Reading Comprehension

    ERIC Educational Resources Information Center

    Neebe, Diana Combs

    2017-01-01

    Learning by example is nothing new to the education landscape. Research into think-aloud protocols, though often used as a form of assessment rather than instruction, provided practical, content-specific literacy strategies for crafting the instructional intervention in this study. Additionally, research into worked examples--from the earliest…

  18. Covariate adjustment of event histories estimated from Markov chains: the additive approach.

    PubMed

    Aalen, O O; Borgan, O; Fekjaer, H

    2001-12-01

    Markov chain models are frequently used for studying event histories that include transitions between several states. An empirical transition matrix for nonhomogeneous Markov chains has previously been developed, including a detailed statistical theory based on counting processes and martingales. In this article, we show how to estimate transition probabilities dependent on covariates. This technique may, e.g., be used for making estimates of individual prognosis in epidemiological or clinical studies. The covariates are included through nonparametric additive models on the transition intensities of the Markov chain. The additive model allows for estimation of covariate-dependent transition intensities, and again a detailed theory exists based on counting processes. The martingale setting now allows for a very natural combination of the empirical transition matrix and the additive model, resulting in estimates that can be expressed as stochastic integrals, and hence their properties are easily evaluated. Two medical examples will be given. In the first example, we study how the lung cancer mortality of uranium miners depends on smoking and radon exposure. In the second example, we study how the probability of being in response depends on patient group and prophylactic treatment for leukemia patients who have had a bone marrow transplantation. A program in R and S-PLUS that can carry out the analyses described here has been developed and is freely available on the Internet.

  19. 26 CFR 1.851-5 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Example 5. Investment Company Z, which keeps its books and makes its returns on the basis of the calendar... solely as a result of such distributions. Example 6. Investment Company Q, which keeps its books and... TAXES Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The...

  20. Asymmetric Michael Addition Mediated by Chiral Ionic Liquids.

    PubMed

    Suzuki, Yumiko

    2018-06-01

    Chiral ionic liquids with a focus on their applications in asymmetric Michael additions and related reactions were reviewed. The examples were classified on the basis of the mode of asymmetric induction (e.g., external induction/non-covalent interaction or internal induction/covalent bond formation), the roles in reactions (as a solvent or catalyst), and their structural features (e.g., imidazolium-based chiral cations, other chiral oniums; proline derivatives). Most of the reactions with high chiral induction are Michael addition of ketones or aldehydes to chalcones or nitrostyrenes where proline-derived chiral ionic liquids catalyze the reaction through enamine/ iminium formation. Many reports demonstrate the recyclability of ionic liquid-tagged pyrrolidines.

  1. What works with worked examples: Extending self-explanation and analogical comparison to synthesis problems

    NASA Astrophysics Data System (ADS)

    Badeau, Ryan; White, Daniel R.; Ibrahim, Bashirah; Ding, Lin; Heckler, Andrew F.

    2017-12-01

    The ability to solve physics problems that require multiple concepts from across the physics curriculum—"synthesis" problems—is often a goal of physics instruction. Three experiments were designed to evaluate the effectiveness of two instructional methods employing worked examples on student performance with synthesis problems; these instructional techniques, analogical comparison and self-explanation, have previously been studied primarily in the context of single-concept problems. Across three experiments with students from introductory calculus-based physics courses, both self-explanation and certain kinds of analogical comparison of worked examples significantly improved student performance on a target synthesis problem, with distinct improvements in recognition of the relevant concepts. More specifically, analogical comparison significantly improved student performance when the comparisons were invoked between worked synthesis examples. In contrast, similar comparisons between corresponding pairs of worked single-concept examples did not significantly improve performance. On a more complicated synthesis problem, self-explanation was significantly more effective than analogical comparison, potentially due to differences in how successfully students encoded the full structure of the worked examples. Finally, we find that the two techniques can be combined for additional benefit, with the trade-off of slightly more time on task.

  2. [Palliative care: an example of Comparative Effectiveness Research?].

    PubMed

    Schmacke, Norbert

    2012-01-01

    Comparative Effectiveness Research (CER) seeks to establish treatment objectives and concepts striving to achieve patient relevant progress in therapy on the basis of published evidence. Using the example of palliative medicine and palliative care, respectively, it will be demonstrated that these two are under-researched areas of care. In addition, it will become clear that the success of this interdisciplinary treatment concept for the seriously ill must be weighed in the light of traditional clinical research - far beyond the cancer diagnosis. The current distinction between curative and palliative research and care urgently needs to be reconsidered. Copyright © 2012. Published by Elsevier GmbH.

  3. 26 CFR 1.663(c)-5 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Examples. 1.663(c)-5 Section 1.663(c)-5 Internal... TAXES Estates and Trusts Which May Accumulate Income Or Which Distribute Corpus § 1.663(c)-5 Examples. Section 663(c) may be illustrated by the following examples: Example 1. (i) A single trust was created in...

  4. 10 CFR 1706.9 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... FACILITIES SAFETY BOARD ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTERESTS § 1706.9 Examples. The examples... work being performed for DOE to ensure no potential or actual conflict of interest would be created through award of the Board contract. Should the Board determine that no potential or actual conflict of...

  5. Additive manufacturing: From implants to organs.

    PubMed

    Douglas, Tania S

    2014-05-12

    Additive manufacturing (AM) constructs 3D objects layer by layer under computer control from 3D models. 3D printing is one example of this kind of technology. AM offers geometric flexibility in its products and therefore allows customisation to suit individual needs. Clinical success has been shown with models for surgical planning, implants, assistive devices and scaffold-based tissue engineering. The use of AM to print tissues and organs that mimic nature in structure and function remains an elusive goal, but has the potential to transform personalised medicine, drug development and scientific understanding of the mechanisms of disease. 

  6. Code query by example

    NASA Astrophysics Data System (ADS)

    Vaucouleur, Sebastien

    2011-02-01

    We introduce code query by example for customisation of evolvable software products in general and of enterprise resource planning systems (ERPs) in particular. The concept is based on an initial empirical study on practices around ERP systems. We motivate our design choices based on those empirical results, and we show how the proposed solution helps with respect to the infamous upgrade problem: the conflict between the need for customisation and the need for upgrade of ERP systems. We further show how code query by example can be used as a form of lightweight static analysis, to detect automatically potential defects in large software products. Code query by example as a form of lightweight static analysis is particularly interesting in the context of ERP systems: it is often the case that programmers working in this field are not computer science specialists but more of domain experts. Hence, they require a simple language to express custom rules.

  7. The Effects of Segmented Multimedia Worked Examples and Self-Explanations on Acquisition of Conceptual Knowledge and Problem-Solving Performance in an Undergraduate Engineering Course

    ERIC Educational Resources Information Center

    Kapli, Natalia V.

    2010-01-01

    The study investigated the effects of non-segmented multimedia worked examples (NS-MWE), segmented multimedia worked examples (S-MWE), and segmented multimedia worked examples enhanced with self-explanation prompts (S-MWE-SE) on acquisition of conceptual knowledge and problem solving performance in an undergraduate engineering course. In addition,…

  8. Example Problems in LES Combustion

    DTIC Science & Technology

    2016-09-26

    AFRL-RW-EG-TP-2016-002 Example Problems in LES Combustion Douglas V. Nance Air Force Research Laboratory Munitions...AIR FORCE RESEARCH LABORATORY MUNITIONS DIRECTORATE  Air Force...4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Example Problem in LES Combustion 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER

  9. Rent Seeking: A Textbook Example

    ERIC Educational Resources Information Center

    Pecorino, Paul

    2007-01-01

    The author argues that the college textbook market provides a clear example of monopoly seeking as described by Tullock (1967, 1980). This behavior is also known as rent seeking. Because this market is important to students, this example of rent seeking will be of particular interest to them. (Contains 24 notes.)

  10. Asymmetric Michael Addition Mediated by Chiral Ionic Liquids

    PubMed Central

    Suzuki, Yumiko

    2018-01-01

    Chiral ionic liquids with a focus on their applications in asymmetric Michael additions and related reactions were reviewed. The examples were classified on the basis of the mode of asymmetric induction (e.g., external induction/non-covalent interaction or internal induction/covalent bond formation), the roles in reactions (as a solvent or catalyst), and their structural features (e.g., imidazolium-based chiral cations, other chiral oniums; proline derivatives). Most of the reactions with high chiral induction are Michael addition of ketones or aldehydes to chalcones or nitrostyrenes where proline-derived chiral ionic liquids catalyze the reaction through enamine/ iminium formation. Many reports demonstrate the recyclability of ionic liquid-tagged pyrrolidines. PMID:29861702

  11. Changes of scaling relationships in an evolving population: The example of "sedimentary" stylolites

    NASA Astrophysics Data System (ADS)

    Peacock, D. C. P.; Korneva, I.; Nixon, C. W.; Rotevatn, A.

    2017-03-01

    Bed-parallel (;sedimentary;) stylolites are used as an example of a population that evolves by the addition of new components, their growth and their merger. It is shown that this style of growth controls the changes in the scaling relationships of the population. Stylolites tend to evolve in carbonate rocks through time, for example by compaction during progressive burial. The evolution of a population of stylolites, and their likely effects on porosity, are demonstrated using simple numerical models. Starting with a power-law distribution, the adding of new stylolites, the increase in their amplitudes and their merger decrease the slope of magnitude versus cumulative frequency of the population. The population changes to a non-power-law distribution as smaller stylolites merge to form larger stylolites. The results suggest that other populations can be forward- or backward-modelled, such as fault lengths, which also evolve by the addition of components, their growth and merger. Consideration of the ways in which populations change improves understanding of scaling relationships and vice versa, and would assist in the management of geofluid reservoirs.

  12. Polymer X-ray refractive nano-lenses fabricated by additive technology.

    PubMed

    Petrov, A K; Bessonov, V O; Abrashitova, K A; Kokareva, N G; Safronov, K R; Barannikov, A A; Ershov, P A; Klimova, N B; Lyatun, I I; Yunkin, V A; Polikarpov, M; Snigireva, I; Fedyanin, A A; Snigirev, A

    2017-06-26

    The present work demonstrates the potential applicability of additive manufacturing to X-Ray refractive nano-lenses. A compound refractive lens with a radius of 5 µm was produced by the two-photon polymerization induced lithography. It was successfully tested at the X-ray microfocus laboratory source and a focal spot of 5 μm was measured. An amorphous nature of polymer material combined with the potential of additive technologies may result in a significantly enhanced focusing performance compared to the best examples of modern X-ray compound refractive lenses.

  13. Active Learning with Irrelevant Examples

    NASA Technical Reports Server (NTRS)

    Wagstaff, Kiri; Mazzoni, Dominic

    2009-01-01

    An improved active learning method has been devised for training data classifiers. One example of a data classifier is the algorithm used by the United States Postal Service since the 1960s to recognize scans of handwritten digits for processing zip codes. Active learning algorithms enable rapid training with minimal investment of time on the part of human experts to provide training examples consisting of correctly classified (labeled) input data. They function by identifying which examples would be most profitable for a human expert to label. The goal is to maximize classifier accuracy while minimizing the number of examples the expert must label. Although there are several well-established methods for active learning, they may not operate well when irrelevant examples are present in the data set. That is, they may select an item for labeling that the expert simply cannot assign to any of the valid classes. In the context of classifying handwritten digits, the irrelevant items may include stray marks, smudges, and mis-scans. Querying the expert about these items results in wasted time or erroneous labels, if the expert is forced to assign the item to one of the valid classes. In contrast, the new algorithm provides a specific mechanism for avoiding querying the irrelevant items. This algorithm has two components: an active learner (which could be a conventional active learning algorithm) and a relevance classifier. The combination of these components yields a method, denoted Relevance Bias, that enables the active learner to avoid querying irrelevant data so as to increase its learning rate and efficiency when irrelevant items are present. The algorithm collects irrelevant data in a set of rejected examples, then trains the relevance classifier to distinguish between labeled (relevant) training examples and the rejected ones. The active learner combines its ranking of the items with the probability that they are relevant to yield a final decision about which item

  14. Analog Computer Laboratory with Biological Examples.

    ERIC Educational Resources Information Center

    Strebel, Donald E.

    1979-01-01

    The use of biological examples in teaching applications of the analog computer is discussed and several examples from mathematical ecology, enzyme kinetics, and tracer dynamics are described. (Author/GA)

  15. "Anti-Michael addition" of Grignard reagents to sulfonylacetylenes: synthesis of alkynes.

    PubMed

    Esteban, Francisco; Boughani, Lazhar; García Ruano, José L; Fraile, Alberto; Alemán, José

    2017-05-10

    In this work, the addition of Grignard reagents to arylsulfonylacetylenes, which undergoes an "anti-Michael addition", resulting in their alkynylation under very mild conditions is described. The simplicity of the experimental procedure and the functional group tolerance are the main features of this methodology. This is an important advantage over the use of organolithium at -78 °C that we previously reported. Moreover, the synthesis of diynes and other examples showing functional group tolerance in this anti-Michael reaction is also presented.

  16. [Problem areas and examples of best practice in intersectoral medication treatment--a literature review].

    PubMed

    Mehrmann, Lena; Ollenschläger, Günter

    2014-01-01

    Transitions between the outpatient and inpatient sector are a critical phase in medication treatment. This article provides an overview of published problem areas and examples of best practice in the intersectoral medication treatment. Data with regard to related problem areas and examples of best practice was collected in August 2011 by a systematic literature research. The relevant literature was identified using the following databases and search engines: MEDLINE, The Cochrane Library, EMBASE, Google, and Google Scholar. Additionally, a hand search was done on the websites of SpringerLink and Thieme Connect. The initial search yielded a total of 4,409 records which were further selected in two screening steps and analysed according to their relevance. Of the remaining 63 records, 3 exclusively described problem areas, 11 of them examples of best practice, and 49 provided information on both problem areas and examples of best practice with regard to intersectoral medication treatment. Among other things, problem areas include varying legal regulations in inpatient and outpatient medication treatment, drug therapy interruptions after hospital discharge, or deficits in communication and continuity of care. Examples of best practice are projects, programmes, initiatives, recommendations, and points to consider with respect to medication reconciliation, pharmaceutical support, or transitions of care. Problem areas as well as examples of best practice are mainly focused on the transition from inpatient to outpatient care. Copyright © 2013. Published by Elsevier GmbH.

  17. Fundamental Travel Demand Model Example

    NASA Technical Reports Server (NTRS)

    Hanssen, Joel

    2010-01-01

    Instances of transportation models are abundant and detailed "how to" instruction is available in the form of transportation software help documentation. The purpose of this paper is to look at the fundamental inputs required to build a transportation model by developing an example passenger travel demand model. The example model reduces the scale to a manageable size for the purpose of illustrating the data collection and analysis required before the first step of the model begins. This aspect of the model development would not reasonably be discussed in software help documentation (it is assumed the model developer comes prepared). Recommendations are derived from the example passenger travel demand model to suggest future work regarding the data collection and analysis required for a freight travel demand model.

  18. The interplay between customer participation and difficulty of design examples in the online designing process and its effect on customer satisfaction: mediational analyses.

    PubMed

    Chang, Chia-Chi; Chen, Hui-Yun; Huang, I-Chiang

    2009-04-01

    In the current consumer-centric economy, consumers increasingly desire the opportunity to design their own products in order to express more effectively their self-image. Mass customization, based on efficient and flexible modulization designs, has provided individualized products to satisfy this desire. This work presents an experiment employed to demonstrate that customer participation leads to higher satisfaction. Specifically, the increment in customer satisfaction due to participation is greater when an easy example is provided than when either no example or a difficult one is provided. Additionally, self-congruity plays a mediating role on the customer participation-satisfaction relationship, and this mediating effect varies across different levels of the design example provided in the design process. When an easy design example is present, customer participation has a direct effect on satisfaction, in addition to the indirect effect of self-congruity. When a difficult example is provided, customer participation does not have incremental effects on either self-congruity or customer satisfaction. Finally, when no design example is shown to customers, contrary to our expectation, participation still enhances customer satisfaction due to an increased sense of self-congruity.

  19. 15 CFR 700.52 - Examples of assistance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Examples of assistance. 700.52 Section... DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Special Priorities Assistance § 700.52 Examples of assistance... an item needed to fill a rated order. (b) Other examples of special priorities assistance include: (1...

  20. Dosage and duration effects of nitrogen additions on ectomycorrhizal sporocarp production and functioning: an example from two N-limited boreal forests.

    PubMed

    Hasselquist, Niles J; Högberg, Peter

    2014-08-01

    Although it is well known that nitrogen (N) additions strongly affect ectomycorrhizal (EM) fungal community composition, less is known about how different N application rates and duration of N additions affect the functional role EM fungi play in the forest N cycle.We measured EM sporocarp abundance and species richness as well as determined the δ (15)N in EM sporocarps and tree foliage in two Pinus sylvestris forests characterized by short- and long-term N addition histories and multiple N addition treatments. After 20 and 39 years of N additions, two of the long-term N addition treatments were terminated, thereby providing a unique opportunity to examine the temporal recovery of EM sporocarps after cessation of high N loading.In general, increasing N availability significantly reduced EM sporocarp production, species richness, and the amount of N retained in EM sporocarps. However, these general responses were strongly dependent on the application rate and duration of N additions. The annual addition of 20 kg·N·ha(-1) for the past 6 years resulted in a slight increase in the production and retention of N in EM sporocarps, whereas the addition of 100 kg·N·ha(-1)·yr(-1) during the same period nearly eliminated EM sporocarps. In contrast, long-term additions of N at rates of ca. 35 or 70 kg·N·ha(-1)·yr(-1) for the past 40 years did not eliminate tree carbon allocation to EM sporocarps, although there was a decrease in the abundance and a shift in the dominant EM sporocarp taxa. Despite no immediate recovery, EM sporocarp abundance and species richness approached those of the control 20 years after terminating N additions in the most heavily fertilized treatment, suggesting a recovery of carbon allocation to EM sporocarps after cessation of high N loading.Our results provide evidence for a tight coupling between tree carbon allocation to and N retention in EM sporocarps and moreover highlight the potential use of δ (15)N in EM sporocarps as a

  1. [History of "special therapeutic directions": the example of homeopathy].

    PubMed

    Hopff, W H

    1996-04-01

    As for generally accepted therapeutic methods, the "special methods" may appear to be effective due to spontaneous recovery provided by nature. A great number of sceptical physicians are aware of this fact. The pharmacologist works continuously to differentiate effects directly caused by medical treatments - mainly drugs - from effects resulting from spontaneous recovery. This is one of the most difficult problems in medical treatment. As a representative example of all "special methods", we concentrate here on the history of homeopathy. As is generally known, there is no conformity in homeopathy, for example monotherapy versus therapy with complex homeopathic products; refusing the simile-rule; treatment with high potencies versus treatment with low potencies; classic versus scholastic homeopathy. The number of homeopathies really equals the number of homeopathic physicians. For this reason, instruction in homeopathy on the academic level is impossible. In addition, we have to forget all natural laws only to prove that "potentiation" may be true. Therapeutic success due purely to chance may be explained rationally and is occasionally seen in all other "special methods". The theories of homeopaths for the action with homeopathic products are neither in accordance with our natural laws nor comply with a rational philosophy.

  2. Simpson's Paradox: Examples.

    PubMed

    Wang, Bokai; Wu, Pan; Kwan, Brian; Tu, Xin M; Feng, Changyong

    2018-04-25

    Simpson's paradox is very prevalent in many areas. It characterizes the inconsistency between the conditional and marginal interpretations of the data. In this paper, we illustrate through some examples how the Simpson's paradox can happen in continuous, categorical, and time-to-event data.

  3. Simple Perturbation Example for Quantum Chemistry.

    ERIC Educational Resources Information Center

    Goodfriend, P. L.

    1985-01-01

    Presents a simple example that illustrates various aspects of the Rayleigh-Schrodinger perturbation theory. The example is a particularly good one because it is straightforward and can be compared with both the exact solution and with experimental data. (JN)

  4. 25 CFR 309.10 - What are some sample categories and examples of Indian products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... products? 309.10 Section 309.10 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.10 What are some sample categories and examples of Indian.... Additionally, although the Indian Arts and Crafts Act of 1990 and the Indian Arts and Crafts Enforcement Act of...

  5. 25 CFR 309.10 - What are some sample categories and examples of Indian products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... products? 309.10 Section 309.10 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.10 What are some sample categories and examples of Indian.... Additionally, although the Indian Arts and Crafts Act of 1990 and the Indian Arts and Crafts Enforcement Act of...

  6. Development and Applications of Benchmark Examples for Static Delamination Propagation Predictions

    NASA Technical Reports Server (NTRS)

    Krueger, Ronald

    2013-01-01

    The development and application of benchmark examples for the assessment of quasistatic delamination propagation capabilities was demonstrated for ANSYS (TradeMark) and Abaqus/Standard (TradeMark). The examples selected were based on finite element models of Double Cantilever Beam (DCB) and Mixed-Mode Bending (MMB) specimens. First, quasi-static benchmark results were created based on an approach developed previously. Second, the delamination was allowed to propagate under quasi-static loading from its initial location using the automated procedure implemented in ANSYS (TradeMark) and Abaqus/Standard (TradeMark). Input control parameters were varied to study the effect on the computed delamination propagation. Overall, the benchmarking procedure proved valuable by highlighting the issues associated with choosing the appropriate input parameters for the VCCT implementations in ANSYS® and Abaqus/Standard®. However, further assessment for mixed-mode delamination fatigue onset and growth is required. Additionally studies should include the assessment of the propagation capabilities in more complex specimens and on a structural level.

  7. When Does an Argument Use a Generic Example?

    ERIC Educational Resources Information Center

    Yopp, David A.; Ely, Rob

    2016-01-01

    We offer criteria that an observer can use to determine whether an argument that uses an example to argue for a general claim appeals to that example generically. We review existing literature on generic example and note the strengths of each contribution, as well as inconsistencies among uses of the term. We offer several examples from the…

  8. Additive Biotech-Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology.

    PubMed

    Krujatz, Felix; Lode, Anja; Seidel, Julia; Bley, Thomas; Gelinsky, Michael; Steingroewer, Juliane

    2017-10-25

    The diversity and complexity of biotechnological applications are constantly increasing, with ever expanding ranges of production hosts, cultivation conditions and measurement tasks. Consequently, many analytical and cultivation systems for biotechnology and bioprocess engineering, such as microfluidic devices or bioreactors, are tailor-made to precisely satisfy the requirements of specific measurements or cultivation tasks. Additive manufacturing (AM) technologies offer the possibility of fabricating tailor-made 3D laboratory equipment directly from CAD designs with previously inaccessible levels of freedom in terms of structural complexity. This review discusses the historical background of these technologies, their most promising current implementations and the associated workflows, fabrication processes and material specifications, together with some of the major challenges associated with using AM in biotechnology/bioprocess engineering. To illustrate the great potential of AM, selected examples in microfluidic devices, 3D-bioprinting/biofabrication and bioprocess engineering are highlighted. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Comparing Examples: WebAssign versus Textbook

    NASA Astrophysics Data System (ADS)

    Richards, Evan; Polak, Jeff; Hardin, Ashley; Risley, John, , Dr.

    2005-11-01

    Research shows students can learn from worked examples.^1 This pilot study compared two groups of students' performance (10 each) in solving physics problems. One group had access to interactive examples^2 released in WebAssign^3, while the other group had access to the counterpart textbook examples. Verbal data from students in problem solving sessions was collected using a think aloud protocol^4 and the data was analyzed using Chi's procedures.^5 An explanation of the methodology and results will be presented. Future phases of this pilot study based upon these results will also be discussed. ^1Atkinson, R.K., Derry, S.J., Renkl A., Wortham, D. (2000). ``Learning from Examples: Instructional Principles from the Worked Examples Research'', Review of Educational Research, vol. 70, n. 2, pp. 181-214. ^2Serway, R.A. & Faughn, J.S. (2006). College Physics (7^th ed.). Belmont, CA: Thomson Brooks/Cole. ^3 see www.webassign.net ^4 Ericsson, K.A. & Simon, H.A. (1984). Protocol Analysis: Verbal Reports as Data. Cambridge, Massachusetts: The MIT Press. ^5 Chi, Michelene T.H. (1997). ``Quantifying Qualitative Analyses of Verbal Data: A Practical Guide,'' The Journal of the Learning Sciences, vol. 6, n. 3, pp. 271-315.

  10. Estimating interaction on an additive scale between continuous determinants in a logistic regression model.

    PubMed

    Knol, Mirjam J; van der Tweel, Ingeborg; Grobbee, Diederick E; Numans, Mattijs E; Geerlings, Mirjam I

    2007-10-01

    To determine the presence of interaction in epidemiologic research, typically a product term is added to the regression model. In linear regression, the regression coefficient of the product term reflects interaction as departure from additivity. However, in logistic regression it refers to interaction as departure from multiplicativity. Rothman has argued that interaction estimated as departure from additivity better reflects biologic interaction. So far, literature on estimating interaction on an additive scale using logistic regression only focused on dichotomous determinants. The objective of the present study was to provide the methods to estimate interaction between continuous determinants and to illustrate these methods with a clinical example. and results From the existing literature we derived the formulas to quantify interaction as departure from additivity between one continuous and one dichotomous determinant and between two continuous determinants using logistic regression. Bootstrapping was used to calculate the corresponding confidence intervals. To illustrate the theory with an empirical example, data from the Utrecht Health Project were used, with age and body mass index as risk factors for elevated diastolic blood pressure. The methods and formulas presented in this article are intended to assist epidemiologists to calculate interaction on an additive scale between two variables on a certain outcome. The proposed methods are included in a spreadsheet which is freely available at: http://www.juliuscenter.nl/additive-interaction.xls.

  11. Evaluating suggestibility to additive and contradictory misinformation following explicit error detection in younger and older adults.

    PubMed

    Huff, Mark J; Umanath, Sharda

    2018-06-01

    In 2 experiments, we assessed age-related suggestibility to additive and contradictory misinformation (i.e., remembering of false details from an external source). After reading a fictional story, participants answered questions containing misleading details that were either additive (misleading details that supplemented an original event) or contradictory (errors that changed original details). On a final test, suggestibility was greater for additive than contradictory misinformation, and older adults endorsed fewer false contradictory details than younger adults. To mitigate suggestibility in Experiment 2, participants were warned about potential errors, instructed to detect errors, or instructed to detect errors after exposure to examples of additive and contradictory details. Again, suggestibility to additive misinformation was greater than contradictory, and older adults endorsed less contradictory misinformation. Only after detection instructions with misinformation examples were younger adults able to reduce contradictory misinformation effects and reduced these effects to the level of older adults. Additive misinformation however, was immune to all warning and detection instructions. Thus, older adults were less susceptible to contradictory misinformation errors, and younger adults could match this misinformation rate when warning/detection instructions were strong. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  12. An additional "R": remembering the animals.

    PubMed

    Iliff, Susan A

    2002-01-01

    Relationships inevitably develop between humans and animals, regardless of the function or use of the animal partners. The need to recognize the existence of these human-animal bonds, as well as acknowledge the use of the animals, is widespread. Religious memorial services for animals in certain areas of the world provide an historical basis for such acknowledgment activities. The diversity of sacred and secular approaches to memorializing or acknowledging animals is illustrated by representative examples of such events. The need to establish such events, particularly in academic and research settings, is emphasized. The pros and cons of developing and establishing acknowledgment activities in addition to the benefits of implementing such events are discussed.

  13. Polymerization of ethylene through reversible addition-fragmentation chain transfer (RAFT).

    PubMed

    Dommanget, Cédric; D'Agosto, Franck; Monteil, Vincent

    2014-06-23

    The present paper reports the first example of a controlled radical polymerization of ethylene using reversible addition-fragmentation chain transfer (RAFT) in the presence of xanthates (Alkyl-OC(=S)S-R) as controlling agents under relative mild conditions (70 °C, <200 bars). The specific reactivity of the produced alkyl-type propagating radicals induces a side fragmentation reaction of the stabilizing O-alkyl Z group of the controlling agents. This fragmentation, rarely observed in RAFT, was proven by NMR analyses. In addition, semicrystalline copolymers of ethylene and vinyl acetate were also prepared with a similar level of control. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Contract Example: Monrovia, CA

    EPA Pesticide Factsheets

    Example Residential and Commercial Solid Waste Franchise Agreement designed to advance zero waste goals between the city of Monrovia and Arakelian Enterprises, Inc. dba Athens Services, a California corporation.

  15. Dynamic Programming: An Introduction by Example

    ERIC Educational Resources Information Center

    Zietz, Joachim

    2007-01-01

    The author introduces some basic dynamic programming techniques, using examples, with the help of the computer algebra system "Maple". The emphasis is on building confidence and intuition for the solution of dynamic problems in economics. To integrate the material better, the same examples are used to introduce different techniques. One covers the…

  16. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  17. Estimation in SEM: A Concrete Example

    ERIC Educational Resources Information Center

    Ferron, John M.; Hess, Melinda R.

    2007-01-01

    A concrete example is used to illustrate maximum likelihood estimation of a structural equation model with two unknown parameters. The fitting function is found for the example, as are the vector of first-order partial derivatives, the matrix of second-order partial derivatives, and the estimates obtained from each iteration of the Newton-Raphson…

  18. Example-Based Learning: Effects of Different Types of Examples on Student Performance, Cognitive Load and Self-Efficacy in a Statistical Learning Task

    ERIC Educational Resources Information Center

    Huang, Xiaoxia

    2017-01-01

    Previous research has indicated the disconnect between example-based research focusing on worked examples (WEs) and that focusing on modeling examples. The purpose of this study was to examine and compare the effect of four different types of examples from the two separate lines of research, including standard WEs, erroneous WEs, expert (masterly)…

  19. Rebuilding DEMATEL threshold value: an example of a food and beverage information system.

    PubMed

    Hsieh, Yi-Fang; Lee, Yu-Cheng; Lin, Shao-Bin

    2016-01-01

    This study demonstrates how a decision-making trial and evaluation laboratory (DEMATEL) threshold value can be quickly and reasonably determined in the process of combining DEMATEL and decomposed theory of planned behavior (DTPB) models. Models are combined to identify the key factors of a complex problem. This paper presents a case study of a food and beverage information system as an example. The analysis of the example indicates that, given direct and indirect relationships among variables, if a traditional DTPB model only simulates the effects of the variables without considering that the variables will affect the original cause-and-effect relationships among the variables, then the original DTPB model variables cannot represent a complete relationship. For the food and beverage example, a DEMATEL method was employed to reconstruct a DTPB model and, more importantly, to calculate reasonable DEMATEL threshold value for determining additional relationships of variables in the original DTPB model. This study is method-oriented, and the depth of investigation into any individual case is limited. Therefore, the methods proposed in various fields of study should ideally be used to identify deeper and more practical implications.

  20. 32 CFR 644.102 - Examples of involuntary acquisitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Examples of involuntary acquisitions. 644.102... PROPERTY REAL ESTATE HANDBOOK Acquisition Involuntary Acquisition by the United States § 644.102 Examples... property, as prescribed by Pub. L. 91-646. Examples of involuntary acquisition are: (a) Damage to real...

  1. Using Learner Generated Examples to Introduce New Concepts

    ERIC Educational Resources Information Center

    Watson, Anne; Shipman, Steve

    2008-01-01

    In this paper we describe learners being asked to generate examples of new mathematical concepts, thus developing and exploring example spaces. First we elaborate the theoretical background for learner generated examples (LGEs) in learning new concepts. The data we then present provides evidence of the possibility of learning new concepts through…

  2. Learning Probabilistic Logic Models from Probabilistic Examples

    PubMed Central

    Chen, Jianzhong; Muggleton, Stephen; Santos, José

    2009-01-01

    Abstract We revisit an application developed originally using abductive Inductive Logic Programming (ILP) for modeling inhibition in metabolic networks. The example data was derived from studies of the effects of toxins on rats using Nuclear Magnetic Resonance (NMR) time-trace analysis of their biofluids together with background knowledge representing a subset of the Kyoto Encyclopedia of Genes and Genomes (KEGG). We now apply two Probabilistic ILP (PILP) approaches - abductive Stochastic Logic Programs (SLPs) and PRogramming In Statistical modeling (PRISM) to the application. Both approaches support abductive learning and probability predictions. Abductive SLPs are a PILP framework that provides possible worlds semantics to SLPs through abduction. Instead of learning logic models from non-probabilistic examples as done in ILP, the PILP approach applied in this paper is based on a general technique for introducing probability labels within a standard scientific experimental setting involving control and treated data. Our results demonstrate that the PILP approach provides a way of learning probabilistic logic models from probabilistic examples, and the PILP models learned from probabilistic examples lead to a significant decrease in error accompanied by improved insight from the learned results compared with the PILP models learned from non-probabilistic examples. PMID:19888348

  3. Learning Probabilistic Logic Models from Probabilistic Examples.

    PubMed

    Chen, Jianzhong; Muggleton, Stephen; Santos, José

    2008-10-01

    We revisit an application developed originally using abductive Inductive Logic Programming (ILP) for modeling inhibition in metabolic networks. The example data was derived from studies of the effects of toxins on rats using Nuclear Magnetic Resonance (NMR) time-trace analysis of their biofluids together with background knowledge representing a subset of the Kyoto Encyclopedia of Genes and Genomes (KEGG). We now apply two Probabilistic ILP (PILP) approaches - abductive Stochastic Logic Programs (SLPs) and PRogramming In Statistical modeling (PRISM) to the application. Both approaches support abductive learning and probability predictions. Abductive SLPs are a PILP framework that provides possible worlds semantics to SLPs through abduction. Instead of learning logic models from non-probabilistic examples as done in ILP, the PILP approach applied in this paper is based on a general technique for introducing probability labels within a standard scientific experimental setting involving control and treated data. Our results demonstrate that the PILP approach provides a way of learning probabilistic logic models from probabilistic examples, and the PILP models learned from probabilistic examples lead to a significant decrease in error accompanied by improved insight from the learned results compared with the PILP models learned from non-probabilistic examples.

  4. Examples from Astronomy for High School Physics

    NASA Astrophysics Data System (ADS)

    Dieterich, Sergio

    2016-01-01

    A formal course in physics is increasingly becoming a standard requirement in the high school curriculum. With that dissemination comes the challenge of reaching and motivating a population that is more diverse in their academic abilities and intrinsic motivation. The abstract nature of pure physics is often made more accessible when motivated by examples from everyday life, and providing copious mathematical as well as conceptual examples has become standard practice in high school physics textbooks. Astronomy is a naturally captivating subject and astronomical examples are often successful in capturing the curiosity of high school students as well as the general population. This project seeks to diversify the range of pedagogical materials available to the high school physics instructor by compiling and publishing specific examples where an astronomical concept can be used to motivate the physics curriculum. This collection of examples will consist of both short problems suitable for daily homework assignments as well as longer project style activities. Collaborations are encouraged and inquiries should be directed to sdieterich at carnegiescience dot edu.This work is funded by the NSF Astronomy and Astrophysics Postdoctoral Fellowship Program through NSF grant AST-1400680.

  5. 31 CFR Appendix A to Subpart C of... - Examples

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Examples A Appendix A to Subpart C of... A to Subpart C of Part 29—Examples This appendix contains sample calculations of Federal Benefit Payments in a variety of situations. Optional Retirement Examples Example 1: No Unused Sick Leave A. In...

  6. Examples in the Teaching of Mathematics: Teachers' Perceptions

    ERIC Educational Resources Information Center

    Ng, Lay Keow; Dindyal, Jaguthsing

    2015-01-01

    As part of a study examining how teachers in Singapore select and use examples for teaching mathematics, 121 teachers from 24 secondary schools responded to three open-ended questions about the use of examples in teaching. The results show that students' abilities and the difficulty level of the examples were among the topmost considerations…

  7. TargetMiner: microRNA target prediction with systematic identification of tissue-specific negative examples.

    PubMed

    Bandyopadhyay, Sanghamitra; Mitra, Ramkrishna

    2009-10-15

    Prediction of microRNA (miRNA) target mRNAs using machine learning approaches is an important area of research. However, most of the methods suffer from either high false positive or false negative rates. One reason for this is the marked deficiency of negative examples or miRNA non-target pairs. Systematic identification of non-target mRNAs is still not addressed properly, and therefore, current machine learning approaches are compelled to rely on artificially generated negative examples for training. In this article, we have identified approximately 300 tissue-specific negative examples using a novel approach that involves expression profiling of both miRNAs and mRNAs, miRNA-mRNA structural interactions and seed-site conservation. The newly generated negative examples are validated with pSILAC dataset, which elucidate the fact that the identified non-targets are indeed non-targets.These high-throughput tissue-specific negative examples and a set of experimentally verified positive examples are then used to build a system called TargetMiner, a support vector machine (SVM)-based classifier. In addition to assessing the prediction accuracy on cross-validation experiments, TargetMiner has been validated with a completely independent experimental test dataset. Our method outperforms 10 existing target prediction algorithms and provides a good balance between sensitivity and specificity that is not reflected in the existing methods. We achieve a significantly higher sensitivity and specificity of 69% and 67.8% based on a pool of 90 feature set and 76.5% and 66.1% using a set of 30 selected feature set on the completely independent test dataset. In order to establish the effectiveness of the systematically generated negative examples, the SVM is trained using a different set of negative data generated using the method in Yousef et al. A significantly higher false positive rate (70.6%) is observed when tested on the independent set, while all other factors are kept the

  8. Surface-specific additive manufacturing test artefacts

    NASA Astrophysics Data System (ADS)

    Townsend, Andrew; Racasan, Radu; Blunt, Liam

    2018-06-01

    Many test artefact designs have been proposed for use with additive manufacturing (AM) systems. These test artefacts have primarily been designed for the evaluation of AM form and dimensional performance. A series of surface-specific measurement test artefacts designed for use in the verification of AM manufacturing processes are proposed here. Surface-specific test artefacts can be made more compact because they do not require the large dimensions needed for accurate dimensional and form measurements. The series of three test artefacts are designed to provide comprehensive information pertaining to the manufactured surface. Measurement possibilities include deviation analysis, surface texture parameter data generation, sub-surface analysis, layer step analysis and build resolution comparison. The test artefacts are designed to provide easy access for measurement using conventional surface measurement techniques, for example, focus variation microscopy, stylus profilometry, confocal microscopy and scanning electron microscopy. Additionally, the test artefacts may be simply visually inspected as a comparative tool, giving a fast indication of process variation between builds. The three test artefacts are small enough to be included in every build and include built-in manufacturing traceability information, making them a convenient physical record of the build.

  9. Examples of S1 coverage intervals with very good and very bad long-run success rate

    NASA Astrophysics Data System (ADS)

    Giaquinto, Nicola; Fabbiano, Laura

    2016-04-01

    The paper illustrates, by means of selected examples, the merits and the limits of the method for computing coverage intervals described in the Supplement 1 to the GUM. The assessment of coverage intervals is done by evaluating their long-run success rate. Three pairs of examples are presented, relative to three different ways of generating incomplete knowledge about quantities: toss of dice, presence of additive noise, quantization. In all the pairs of examples, the first one results in a coverage interval with a long-run success rate equal to the coverage probability (set to 95%); the second one, instead, yields an interval with a success rate near to zero. The paper shows that the propagation mechanism of the Supplement 1, while working well in certain special cases, yields unacceptable results in others, and that the problematic issues cannot be neglected. The conclusion is that, if a Bayesian approach to uncertainty evaluation is adopted, the propagation is a particularly delicate issue.

  10. Additive Manufactured Superconducting Cavities

    NASA Astrophysics Data System (ADS)

    Holland, Eric; Rosen, Yaniv; Woolleet, Nathan; Materise, Nicholas; Voisin, Thomas; Wang, Morris; Mireles, Jorge; Carosi, Gianpaolo; Dubois, Jonathan

    Superconducting radio frequency cavities provide an ultra-low dissipative environment, which has enabled fundamental investigations in quantum mechanics, materials properties, and the search for new particles in and beyond the standard model. However, resonator designs are constrained by limitations in conventional machining techniques. For example, current through a seam is a limiting factor in performance for many waveguide cavities. Development of highly reproducible methods for metallic parts through additive manufacturing, referred to colloquially as 3D printing\\x9D, opens the possibility for novel cavity designs which cannot be implemented through conventional methods. We present preliminary investigations of superconducting cavities made through a selective laser melting process, which compacts a granular powder via a high-power laser according to a digitally defined geometry. Initial work suggests that assuming a loss model and numerically optimizing a geometry to minimize dissipation results in modest improvements in device performance. Furthermore, a subset of titanium alloys, particularly, a titanium, aluminum, vanadium alloy (Ti - 6Al - 4V) exhibits properties indicative of a high kinetic inductance material. This work is supported by LDRD 16-SI-004.

  11. Child-Specific Exposure Scenarios Examples (Final Report)

    EPA Science Inventory

    EPA announced the availability of the final report, Child-Specific Exposure Scenarios Examples. This report is intended to be a companion document to the Exposure Factors Handbook (U.S. EPA 2011). The example scenarios were compiled from questions and inquiries r...

  12. Vector Addition and the Speeding Ticket.

    ERIC Educational Resources Information Center

    Brown, Nathan

    1993-01-01

    Discusses the teaching of vectors and the inadequate and inappropriate examples given in many textbooks. Suggests using the motion of a sailboat or the motion of a car moving on the Earth's surface as possible examples. Details a proper vector teaching example. (MVL)

  13. Some Addition and Complexation Reactions of a Silylated Amino(Methylene)Phosphine.

    DTIC Science & Technology

    1984-12-12

    0 ., . % , ’ - - o= . *.- . ° , % , - . -° , .° ..% . . . -= •% .°• - " . = . 4 reagents to the P=C bond 3 , and possible cycloaddition reactions...example, the reaction of 1 with alkyllithium reagents occurs with both nucleophilic substitution and addition leading to trialkylphosphines or P-C-P...such °" as 1 as synthetic reagents in organophosphorus and organometallic chemistry. A secondary objective of this study was to more closely compare

  14. The Power of Examples: Illustrative Examples Enhance Conceptual Learning of Declarative Concepts

    ERIC Educational Resources Information Center

    Rawson, Katherine A.; Thomas, Ruthann C.; Jacoby, Larry L.

    2015-01-01

    Declarative concepts (i.e., key terms with short definitions of the abstract concepts denoted by those terms) are a common kind of information that students are expected to learn in many domains. A common pedagogical approach for supporting learning of declarative concepts involves presenting students with concrete examples that illustrate how the…

  15. Novel active driven drop tower facility for microgravity experiments investigating production technologies on the example of substrate-free additive manufacturing

    NASA Astrophysics Data System (ADS)

    Lotz, Christoph; Wessarges, Yvonne; Hermsdorf, Jörg; Ertmer, Wolfgang; Overmeyer, Ludger

    2018-04-01

    Through the striving of humanity into space, new production processes and technologies for the use under microgravity will be essential in the future. Production of objects in space demands for new processes, like additive manufacturing. This paper presents the concept and the realization for a new machine to investigate microgravity production processes on earth. The machine is based on linear long stator drives and a vacuum chamber carrying up to 1000 kg. For the first time high repetition rate and associated low experimental costs can provide basic research. The paper also introduces the substrate-free additive manufacturing as a future research topic and one of our primary application.

  16. Learning about Functions through Learner-Generated Examples

    ERIC Educational Resources Information Center

    Dinkelman, Martha O.; Cavey, Laurie O.

    2015-01-01

    In many mathematics classrooms, the teacher provides "worked examples" to demonstrate how students should perform certain algorithms or processes. Some students find it difficult to generalize from the examples that teachers provide and cannot apply what they have learned in new situations (Watson and Mason 2002). Instead, teachers might…

  17. Current use and potential of additive manufacturing for optical applications

    NASA Astrophysics Data System (ADS)

    Brunelle, Matthew; Ferralli, Ian; Whitsitt, Rebecca; Medicus, Kate

    2017-10-01

    Additive manufacturing, or 3D printing, has become widely used in recent years for the creation of both prototype and end-use parts. Because the parts are created in a layer-by-layer manner, the flexibility of additive manufacturing is unparalleled and has opened the design space to enable features like undercuts and internal channels which cannot exist on traditional, subtractively manufactured parts. This flexibility can also be leveraged for optical applications. This paper outlines some of the current uses of 3D printing in the optical manufacturing process at Optimax. Several materials and additive technologies are utilized, including polymer printing through fused deposition modeling, which creates parts by depositing a softened thermoplastic filament in a layerwise fashion. Stereolithography, which uses light to cure layers of a photopolymer resin, will also be discussed. These technologies are used to manufacture functional prototypes, fixtures, sealed housings, and other components. Additionally, metal printing through selective laser melting, which uses a laser to melt metal powder layers into a dense solid, will be discussed due to the potential to manufacture thermally stable opticalmechanical assembly frameworks and functional optics. Examples of several additively manufactured optical components will be shown.

  18. Transfer of Solutions to Conditional Probability Problems: Effects of Example Problem Format, Solution Format, and Problem Context

    ERIC Educational Resources Information Center

    Chow, Alan F.; Van Haneghan, James P.

    2016-01-01

    This study reports the results of a study examining how easily students are able to transfer frequency solutions to conditional probability problems to novel situations. University students studied either a problem solved using the traditional Bayes formula format or using a natural frequency (tree diagram) format. In addition, the example problem…

  19. Neutral insulin solutions physically stabilized by addition of Zn2+.

    PubMed

    Brange, J; Havelund, S; Hommel, E; Sørensen, E; Kühl, C

    1986-01-01

    Commercial neutral insulin solutions, all of which contain 2-3 zinc atoms per hexameric unit of insulin, have a relatively limited physical stability when exposed to heat and movement, as for example in insulin infusion pumps. Physical stabilization of neutral insulin solutions has been obtained by addition of two extra Zn2+ per hexamer of insulin. This addition stabilizes porcine and human neutral solutions equally well and does not affect the chemical stability of the insulin. The stabilization is probably obtained by a further strengthening of the hexameric structure of insulin, so that the formation of insoluble insulin fibrils (via the dissociation into the insulin monomer or dimer) is impeded or prevented. The addition of an extra 2 Zn2+ has been shown to be without influence on the insulin immunogenicity in rabbits or on the rate of absorption after subcutaneous injection in diabetic patients. It is concluded that neutral insulin solution can be physically stabilized by addition of extra Zn2+ without affecting other qualities of the insulin preparation including chemical stability, immunogenicity, and duration of action after injection.

  20. Toward an instructionally oriented theory of example-based learning.

    PubMed

    Renkl, Alexander

    2014-01-01

    Learning from examples is a very effective means of initial cognitive skill acquisition. There is an enormous body of research on the specifics of this learning method. This article presents an instructionally oriented theory of example-based learning that integrates theoretical assumptions and findings from three research areas: learning from worked examples, observational learning, and analogical reasoning. This theory has descriptive and prescriptive elements. The descriptive subtheory deals with (a) the relevance and effectiveness of examples, (b) phases of skill acquisition, and (c) learning processes. The prescriptive subtheory proposes instructional principles that make full exploitation of the potential of example-based learning possible. Copyright © 2013 Cognitive Science Society, Inc.

  1. Some examples of geomorphodiversity in Italy

    NASA Astrophysics Data System (ADS)

    Panizza, Mario

    2014-05-01

    The concept of geomorphodiversity (Panizza, 2009) is presented: "the critical and specific assessment of the geomorphological features of a territory, by comparing them in a way both extrinsic (comparison of the geomorphological characteristics with those from other territories) and intrinsic (comparison of the geomorphological characteristics with other areas within the territory itself) and taking into account the level of their scientific quality, the scale of investigation and the purpose of the research". A first example concerns the Dolomites: they have been included in the UNESCO World Heritage List because of their exceptional beauty and unique landscape, together with their scientific importance from the geological and geomorphological point of view. They are of international significance for geomorphodiversity, as the classic site for the development of mountains in dolomite limestone and present a wide range of landforms related to erosion, tectonics and glaciation. They represent a kind of high altitude, open air laboratory of geomorphological heritage of exceptional global value, among the most extraordinary and accessible in the world and ideal for researching, teaching, understanding and developing Earth Science theories. The second example concerns the Emilia-Romagna Apennines, candidate for enrolment in the List of European Geoparks: they show a multifaceted and complex image from the international and regional geomorphological (extrinsic and intrinsic geomorphodiversity) point of view and are an educational example for illustrating morphotectonic evolution, stratigraphic and sedimentological sequences and morpholithological peculiarities connected with gypsum karst and clay mass wasting phenomena. The third example concerns the Vesuvius, one of the National Italian Parks: it shows an extrinsic geomorphodiversity mainly referred to the type of eruptions, with some exemplary processes inserted in international volcanic nomenclature; it makes up an

  2. Cleaning Process Development for Metallic Additively Manufactured Parts

    NASA Technical Reports Server (NTRS)

    Tramel, Terri L.; Welker, Roger; Lowery, Niki; Mitchell, Mark

    2014-01-01

    Additive Manufacturing of metallic components for aerospace applications offers many advantages over traditional manufacturing techniques. As a new technology, many aspects of its widespread utilization remain open to investigation. Among these are the cleaning processes that can be used for post finishing of parts and measurements to verify effectiveness of the cleaning processes. Many cleaning and drying processes and measurement methods that have been used for parts manufactured using conventional techniques are candidates that may be considered for cleaning and verification of additively manufactured parts. Among these are vapor degreasing, ultrasonic immersion and spray cleaning, followed by hot air drying, vacuum baking and solvent displacement drying. Differences in porosity, density, and surface finish of additively manufactured versus conventionally manufactured parts may introduce new considerations in the selection of cleaning and drying processes or the method used to verify their effectiveness. This presentation will review the relative strengths and weaknesses of different candidate cleaning and drying processes as they may apply to additively manufactured metal parts for aerospace applications. An ultrasonic cleaning technique for exploring the cleanability of parts will be presented along with an example using additively manufactured Inconel 718 test specimens to illustrate its use. The data analysis shows that this ultrasonic cleaning approach results in a well-behaved ultrasonic cleaning/extraction behavior. That is, it does not show signs of accelerated cavitation erosion of the base material, which was later confirmed by neutron imaging. In addition, the analysis indicated that complete cleaning would be achieved by ultrasonic immersion cleaning at approximately 5 minutes, which was verified by subsequent cleaning of additional parts.

  3. 28 CFR 51.13 - Examples of changes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... THE VOTING RIGHTS ACT OF 1965, AS AMENDED General Provisions § 51.13 Examples of changes. Changes affecting voting include, but are not limited to, the following examples: (a) Any change in qualifications... in the constituency of an official or the boundaries of a voting unit (e.g., through redistricting...

  4. 28 CFR 51.13 - Examples of changes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... THE VOTING RIGHTS ACT OF 1965, AS AMENDED General Provisions § 51.13 Examples of changes. Changes affecting voting include, but are not limited to, the following examples: (a) Any change in qualifications... in the constituency of an official or the boundaries of a voting unit (e.g., through redistricting...

  5. Blackhole formula and example relativity

    NASA Astrophysics Data System (ADS)

    Shin, Philip

    Black hole formula 1) Second dimension (x,y) f(x)=y Energy E=m*c2 2) Third dimension (x,y,z) really x=y=z Black hole formula Root(c2)=c=Root(E/m) As mass go the velocity of light, mass become black hole so there are energy as multiply by mass. Example relativity When E=m*c2 1) Root(c2)=c=Root(E/m) 2) 3*c*Root(c2)=3*c*Root(E/m)=3*c2 From 1) to 2) as an example, As velocity is faster, mass increased. It means when velocity is increased, sec(time) is slower, and m(distance) is increased. The number is good to study physics.

  6. Emotional expression in music: contribution, linearity, and additivity of primary musical cues.

    PubMed

    Eerola, Tuomas; Friberg, Anders; Bresin, Roberto

    2013-01-01

    The aim of this study is to manipulate musical cues systematically to determine the aspects of music that contribute to emotional expression, and whether these cues operate in additive or interactive fashion, and whether the cue levels can be characterized as linear or non-linear. An optimized factorial design was used with six primary musical cues (mode, tempo, dynamics, articulation, timbre, and register) across four different music examples. Listeners rated 200 musical examples according to four perceived emotional characters (happy, sad, peaceful, and scary). The results exhibited robust effects for all cues and the ranked importance of these was established by multiple regression. The most important cue was mode followed by tempo, register, dynamics, articulation, and timbre, although the ranking varied across the emotions. The second main result suggested that most cue levels contributed to the emotions in a linear fashion, explaining 77-89% of variance in ratings. Quadratic encoding of cues did lead to minor but significant increases of the models (0-8%). Finally, the interactions between the cues were non-existent suggesting that the cues operate mostly in an additive fashion, corroborating recent findings on emotional expression in music (Juslin and Lindström, 2010).

  7. [Infections after bite wounds : For example rat bite fever due to Streptobacillus moniliformis].

    PubMed

    Hof, Herbert; Binder, Rudolf; Schäfer, Christian; Stuber, Madeleine; Licht, Andreas; Bozenhardt-Stavrakidis, Iris; Bode, Konrad

    2018-04-11

    Rat bite fever due to Streptobacillus moniliformis induces typical but not pathognomonic clinical signs, such as local purulent wound infection followed by maculopapular exanthema, myalgia as well as purulent joint infections. Severe complications, such as osteomyelitis and endocarditis are possible. it seems that this infection is rarely diagnosed but this infection could be much more common because the final diagnostic proof is difficult to achieve. Firstly, the culture of these bacteria is critical because the bacteria are fastidious and secondly the exact differentiation of the isolates is hardly possible by standard laboratory methods. Modern techniques such as mass spectroscopy (MALDI-TOF) and molecular biology allow a precise clarification. Surgical cleansing of infection sites in combination with a rational antibiotic therapy, for example with beta-lactam antibiotics, are generally able to cure the infection if treatment is started early enough. In addition, vaccinations, for example against tetanus and rabies have to be considered in this situation as for all other bite wound infections.

  8. Using Worked Examples Assignments in Classroom Instruction

    ERIC Educational Resources Information Center

    Paré-Blagoev, Juliana; Booth, Julie; Elliot, Andrew; Koedinger, Ken

    2013-01-01

    As highlighted by the National Math Panel Report (2008), consistent results from laboratory studies have demonstrated that interleaving worked examples with problems to solve improves learning for novices. The purpose of this work is to create materials and tests that can be used flexibly in classrooms and which employ worked examples interleaved…

  9. Inspiring Examples in Rearrangements of Infinite Series

    ERIC Educational Resources Information Center

    Ramasinghe, W.

    2002-01-01

    Simple examples are really encouraging in the understanding of rearrangements of infinite series, since many texts and teachers provide only existence theorems. In the absence of examples, an existence theorem is just a statement and lends little confidence to understanding. Iterated sums of double series seem to have a similar spirit of…

  10. From Concrete Examples to Abstract Relations: The Rostrolateral Prefrontal Cortex Integrates Novel Examples into Relational Categories.

    PubMed

    Davis, Tyler; Goldwater, Micah; Giron, Josue

    2017-04-01

    The ability to form relational categories for objects that share few features in common is a hallmark of human cognition. For example, anything that can play a preventative role, from a boulder to poverty, can be a "barrier." However, neurobiological research has focused solely on how people acquire categories defined by features. The present functional magnetic resonance imaging study examines how relational and feature-based category learning compare in well-matched learning tasks. Using a computational model-based approach, we observed a cluster in left rostrolateral prefrontal cortex (rlPFC) that tracked quantitative predictions for the representational distance between test and training examples during relational categorization. Contrastingly, medial and dorsal PFC exhibited graded activation that tracked decision evidence during both feature-based and relational categorization. The results suggest that rlPFC computes an alignment signal that is critical for integrating novel examples during relational categorization whereas other PFC regions support more general decision functions. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  11. Examples of geomorphic reclamation on mined lands in Spain by using the GeoFluv method

    NASA Astrophysics Data System (ADS)

    Martín Duque, José F.; Bugosh, Nicholas; de Francisco, Cristina; Hernando, Néstor; Martín, Cristina; Nicolau, José M.; Nyssen, Sara; Tejedor, María; Zapico, Ignacio

    2015-04-01

    This paper describes seven examples of geomorphic reclamation on mined lands of Spain, as solutions for complex environmental problems, by using the GeoFluv method through the Natural Regrade software (Carlson). Of these seven examples, four of them have been partially or totally constructed. Each of them has its own particularities and contributions, becoming innovative geomorphic solutions to existing environmental (ecological, social and economic) problems. The Quebraderos de la Serrana example (Toledo province) allowed a local company to get permission for slate quarrying in a highly ecologically vulnerable area; before that, the permission for extracting rocks had been rejected with a conventional reclamation approach. The Somolinos case is, to this date, the most complete geomorphic reclamation in Spain, and the first one in Europe to have been built by using the GeoFluv method. This restoration has healed a degraded area of about six hectares at the outskirts of the Somolinos hamlet, in a valuable rural landscape of the Guadalajara province. The Arlanza example (Leon province) shows a design which proposes to restore the hydrological connectivity of a coal mine dump which blocked a valley. The Machorro and María Jose examples (Guadalajara province) are allowing kaolin mining to be compatible with the preservation of protected areas at the edge of the Upper Tagus Natural Park (UTNP), in highly vulnerable conditions for water erosion. The Campredó case (Tarragona province) shows an agreement between a mining company, the academia, and the Catalonian Agency of Water, to combine a high standard of geomorphic reclamation with solving problems caused by flooding downstream of a clay mining area. Finally, the Nuria example is also located at the UTNP area; the goals here are to stabilize a large landslide in a waste dump and to minimize the risk of occurrence of flash floods from mining ponds. Additional information on these examples and about the state of art of

  12. Inverse temperature dependence in the diastereoselective addition of Grignard reagents to a tetrahydrofurfural.

    PubMed

    Mowat, Jeffrey; Kang, Baldip; Fonovic, Branden; Dudding, Travis; Britton, Robert

    2009-05-21

    A remarkable example of inverse-temperature-dependent diastereoselectivity was uncovered while investigating the addition of Grignard reagents to a 3-hydroxytetrahydrofurfural. The free hydroxyl group in the tetrahydrofurfural was found to play a key role in these processes, a result corroborated through a series of DFT calculations that also highlighted an entropic preference for the formation of one diastereomer.

  13. POEM: Identifying Joint Additive Effects on Regulatory Circuits.

    PubMed

    Botzman, Maya; Nachshon, Aharon; Brodt, Avital; Gat-Viks, Irit

    2016-01-01

    Expression Quantitative Trait Locus (eQTL) mapping tackles the problem of identifying variation in DNA sequence that have an effect on the transcriptional regulatory network. Major computational efforts are aimed at characterizing the joint effects of several eQTLs acting in concert to govern the expression of the same genes. Yet, progress toward a comprehensive prediction of such joint effects is limited. For example, existing eQTL methods commonly discover interacting loci affecting the expression levels of a module of co-regulated genes. Such "modularization" approaches, however, are focused on epistatic relations and thus have limited utility for the case of additive (non-epistatic) effects. Here we present POEM (Pairwise effect On Expression Modules), a methodology for identifying pairwise eQTL effects on gene modules. POEM is specifically designed to achieve high performance in the case of additive joint effects. We applied POEM to transcription profiles measured in bone marrow-derived dendritic cells across a population of genotyped mice. Our study reveals widespread additive, trans-acting pairwise effects on gene modules, characterizes their organizational principles, and highlights high-order interconnections between modules within the immune signaling network. These analyses elucidate the central role of additive pairwise effect in regulatory circuits, and provide computational tools for future investigations into the interplay between eQTLs. The software described in this article is available at csgi.tau.ac.il/POEM/.

  14. [Results from biomedical aging research. Trends and current examples from immunology].

    PubMed

    Pfister, G; Herndler-Brandstetter, D; Grubeck-Loebenstein, B

    2006-06-01

    The public health of our society is challenged by a continuous increase in life expectancy. Hence, biomedical aging research is enjoying a steadily increasing popularity but also enlightens our understanding of age-related diseases by a number of striking results from basic research. One of the most striking changes that occurs during normal human aging is an overall diminution of immune functions, a phenomenon often termed immunosenescence. Starting from some highly exciting examples from basic immunological research, this article sheds light on which impact normal human aging has on several immune defence mechanisms. In addition, clinical consequences in view of Alzheimer's disease, immunogenicity of vaccines and autoimmune diseases are discussed.

  15. Examples of Complete Solvability of 2D Classical Superintegrable Systems

    NASA Astrophysics Data System (ADS)

    Chen, Yuxuan; Kalnins, Ernie G.; Li, Qiushi; Miller, Willard, Jr.

    2015-11-01

    Classical (maximal) superintegrable systems in n dimensions are Hamiltonian systems with 2n-1 independent constants of the motion, globally defined, the maximum number possible. They are very special because they can be solved algebraically. In this paper we show explicitly, mostly through examples of 2nd order superintegrable systems in 2 dimensions, how the trajectories can be determined in detail using rather elementary algebraic, geometric and analytic methods applied to the closed quadratic algebra of symmetries of the system, without resorting to separation of variables techniques or trying to integrate Hamilton's equations. We treat a family of 2nd order degenerate systems: oscillator analogies on Darboux, nonzero constant curvature, and flat spaces, related to one another via contractions, and obeying Kepler's laws. Then we treat two 2nd order nondegenerate systems, an analogy of a caged Coulomb problem on the 2-sphere and its contraction to a Euclidean space caged Coulomb problem. In all cases the symmetry algebra structure provides detailed information about the trajectories, some of which are rather complicated. An interesting example is the occurrence of ''metronome orbits'', trajectories confined to an arc rather than a loop, which are indicated clearly from the structure equations but might be overlooked using more traditional methods. We also treat the Post-Winternitz system, an example of a classical 4th order superintegrable system that cannot be solved using separation of variables. Finally we treat a superintegrable system, related to the addition theorem for elliptic functions, whose constants of the motion are only rational in the momenta. It is a system of special interest because its constants of the motion generate a closed polynomial algebra. This paper contains many new results but we have tried to present most of the materials in a fashion that is easily accessible to nonexperts, in order to provide entrée to superintegrablity theory.

  16. Inspiring Examples in Rearrangements of Infinite Products

    ERIC Educational Resources Information Center

    Ramasinghe, W.

    2007-01-01

    It is well known that simple examples are really encouraging in the understanding of rearrangements of infinite series. In this paper a similar role is played by simple examples in the case of infinite products. Iterated products of double products seem to have a similar spirit of rearrangements of products, although they are not the same.…

  17. A New Paradigm for Intelligent Tutoring Systems: Example-Tracing Tutors

    ERIC Educational Resources Information Center

    Aleven, Vincent; McLaren, Bruce M.; Sewall, Jonathan; Koedinger, Kenneth R.

    2009-01-01

    The Cognitive Tutor Authoring Tools (CTAT) support creation of a novel type of tutors called example-tracing tutors. Unlike other types of ITSs (e.g., model-tracing tutors, constraint-based tutors), example-tracing tutors evaluate student behavior by flexibly comparing it against generalized examples of problem-solving behavior. Example-tracing…

  18. An example of complex modelling in dentistry using Markov chain Monte Carlo (MCMC) simulation.

    PubMed

    Helfenstein, Ulrich; Menghini, Giorgio; Steiner, Marcel; Murati, Francesca

    2002-09-01

    In the usual regression setting one regression line is computed for a whole data set. In a more complex situation, each person may be observed for example at several points in time and thus a regression line might be calculated for each person. Additional complexities, such as various forms of errors in covariables may make a straightforward statistical evaluation difficult or even impossible. During recent years methods have been developed allowing convenient analysis of problems where the data and the corresponding models show these and many other forms of complexity. The methodology makes use of a Bayesian approach and Markov chain Monte Carlo (MCMC) simulations. The methods allow the construction of increasingly elaborate models by building them up from local sub-models. The essential structure of the models can be represented visually by directed acyclic graphs (DAG). This attractive property allows communication and discussion of the essential structure and the substantial meaning of a complex model without needing algebra. After presentation of the statistical methods an example from dentistry is presented in order to demonstrate their application and use. The dataset of the example had a complex structure; each of a set of children was followed up over several years. The number of new fillings in permanent teeth had been recorded at several ages. The dependent variables were markedly different from the normal distribution and could not be transformed to normality. In addition, explanatory variables were assumed to be measured with different forms of error. Illustration of how the corresponding models can be estimated conveniently via MCMC simulation, in particular, 'Gibbs sampling', using the freely available software BUGS is presented. In addition, how the measurement error may influence the estimates of the corresponding coefficients is explored. It is demonstrated that the effect of the independent variable on the dependent variable may be markedly

  19. 31 CFR Appendix A to Subpart C of... - Examples

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... this example, an individual covered by the Police and Firefighters Plan hired before 1980 retires in... the Police and Firefighters Plan was hired earlier than in example 1A and thus performed more service... this example, an individual covered by the Police and Firefighters Plan and hired before 1980 retires...

  20. TOXIC EQUIVALENCY APPROACH FOR DIOXINS: AN EXAMPLE OF DOSE ADDITIVITY

    EPA Science Inventory

    2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD; dioxin) is often called the most toxic man-made compound. However, it is but the prototype for a family of structurally related compounds which have a common mechanism of action, induce a common spectrum of biological responses, and are...

  1. Tutorial examples for uncertainty quantification methods.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    De Bord, Sarah

    2015-08-01

    This report details the work accomplished during my 2015 SULI summer internship at Sandia National Laboratories in Livermore, CA. During this internship, I worked on multiple tasks with the common goal of making uncertainty quantification (UQ) methods more accessible to the general scientific community. As part of my work, I created a comprehensive numerical integration example to incorporate into the user manual of a UQ software package. Further, I developed examples involving heat transfer through a window to incorporate into tutorial lectures that serve as an introduction to UQ methods.

  2. 26 CFR 1.642(h)-5 - Example.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Example. 1.642(h)-5 Section 1.642(h)-5 Internal... TAXES Estates, Trusts, and Beneficiaries § 1.642(h)-5 Example. The application of section 642(h) may be... deductions 14,800 It also has a capital loss of $5,000. (b) Under section 642(h)(1), an unused net operating...

  3. Giving Personal Examples and Telling Stories in Academic Essays.

    ERIC Educational Resources Information Center

    Hinkel, Eli

    2001-01-01

    Analyzes the extensive use of personal examples and stories in the academic essays of students who are nonnative speakers of English. Draws on a large database of college examination essays to compare the use of personal examples in essays written by native and nonnative speakers. Finds nonnative students not only use examples more often than…

  4. A Unifying Probability Example.

    ERIC Educational Resources Information Center

    Maruszewski, Richard F., Jr.

    2002-01-01

    Presents an example from probability and statistics that ties together several topics including the mean and variance of a discrete random variable, the binomial distribution and its particular mean and variance, the sum of independent random variables, the mean and variance of the sum, and the central limit theorem. Uses Excel to illustrate these…

  5. Augmenting Phase Space Quantization to Introduce Additional Physical Effects

    NASA Astrophysics Data System (ADS)

    Robbins, Matthew P. G.

    Quantum mechanics can be done using classical phase space functions and a star product. The state of the system is described by a quasi-probability distribution. A classical system can be quantized in phase space in different ways with different quasi-probability distributions and star products. A transition differential operator relates different phase space quantizations. The objective of this thesis is to introduce additional physical effects into the process of quantization by using the transition operator. As prototypical examples, we first look at the coarse-graining of the Wigner function and the damped simple harmonic oscillator. By generalizing the transition operator and star product to also be functions of the position and momentum, we show that additional physical features beyond damping and coarse-graining can be introduced into a quantum system, including the generalized uncertainty principle of quantum gravity phenomenology, driving forces, and decoherence.

  6. On the Quality of Examples in Introductory Java Textbooks

    ERIC Educational Resources Information Center

    Borstler, Jurgen; Nordstrom, Marie; Paterson, James H.

    2011-01-01

    Example programs play an important role in the teaching and learning of programming. Students as well as teachers rank examples as the most important resources for learning to program. Example programs work as role models and must therefore always be consistent with the principles and rules we are teaching. However, it is difficult to find or…

  7. Cellular Automata with Anticipation: Examples and Presumable Applications

    NASA Astrophysics Data System (ADS)

    Krushinsky, Dmitry; Makarenko, Alexander

    2010-11-01

    One of the most prospective new methodologies for modelling is the so-called cellular automata (CA) approach. According to this paradigm, the models are built from simple elements connected into regular structures with local interaction between neighbours. The patterns of connections usually have a simple geometry (lattices). As one of the classical examples of CA we mention the game `Life' by J. Conway. This paper presents two examples of CA with anticipation property. These examples include a modification of the game `Life' and a cellular model of crowd movement.

  8. Hinduism and death with dignity: historic and contemporary case examples.

    PubMed

    Dewar, Rajan; Cahners, Nancy; Mitchell, Christine; Forrow, Lachlan

    2015-01-01

    An estimated 1.2 to 2.3 million Hindus live in the United States. End-of-life care choices for a subset of these patients may be driven by religious beliefs. In this article, we present Hindu beliefs that could strongly influence a devout person's decisions about medical care, including end-of-life care. We provide four case examples (one sacred epic, one historical example, and two cases from current practice) that illustrate Hindu notions surrounding pain and suffering at the end of life. Chief among those is the principle of karma, through which one reaps the benefits and penalties for past deeds. Deference to one's spouse or family is another important Hindu value, especially among Hindu women, which can impact the decision-making process and challenge the Western emphasis on autonomy. In addition, the Hindu embrace of astrology can lead to a desire to control the exact time of death. Confounding any generalizations, a Hindu patient may reject or accept treatments based on the individual patient's or family's interpretation of any given tradition. Through an awareness of some of the fundamental practices in Hinduism and the role of individual interpretation within the tradition, clinicians will be better able to support their Hindu patients and families at the end of life. Copyright 2015 The Journal of Clinical Ethics. All rights reserved.

  9. Relevant, irredundant feature selection and noisy example elimination.

    PubMed

    Lashkia, George V; Anthony, Laurence

    2004-04-01

    In many real-world situations, the method for computing the desired output from a set of inputs is unknown. One strategy for solving these types of problems is to learn the input-output functionality from examples in a training set. However, in many situations it is difficult to know what information is relevant to the task at hand. Subsequently, researchers have investigated ways to deal with the so-called problem of consistency of attributes, i.e., attributes that can distinguish examples from different classes. In this paper, we first prove that the notion of relevance of attributes is directly related to the consistency of attributes, and show how relevant, irredundant attributes can be selected. We then compare different relevant attribute selection algorithms, and show the superiority of algorithms that select irredundant attributes over those that select relevant attributes. We also show that searching for an "optimal" subset of attributes, which is considered to be the main purpose of attribute selection, is not the best way to improve the accuracy of classifiers. Employing sets of relevant, irredundant attributes improves classification accuracy in many more cases. Finally, we propose a new method for selecting relevant examples, which is based on filtering the so-called pattern frequency domain. By identifying examples that are nontypical in the determination of relevant, irredundant attributes, irrelevant examples can be eliminated prior to the learning process. Empirical results using artificial and real databases show the effectiveness of the proposed method in selecting relevant examples leading to improved performance even on greatly reduced training sets.

  10. Emotional expression in music: contribution, linearity, and additivity of primary musical cues

    PubMed Central

    Eerola, Tuomas; Friberg, Anders; Bresin, Roberto

    2013-01-01

    The aim of this study is to manipulate musical cues systematically to determine the aspects of music that contribute to emotional expression, and whether these cues operate in additive or interactive fashion, and whether the cue levels can be characterized as linear or non-linear. An optimized factorial design was used with six primary musical cues (mode, tempo, dynamics, articulation, timbre, and register) across four different music examples. Listeners rated 200 musical examples according to four perceived emotional characters (happy, sad, peaceful, and scary). The results exhibited robust effects for all cues and the ranked importance of these was established by multiple regression. The most important cue was mode followed by tempo, register, dynamics, articulation, and timbre, although the ranking varied across the emotions. The second main result suggested that most cue levels contributed to the emotions in a linear fashion, explaining 77–89% of variance in ratings. Quadratic encoding of cues did lead to minor but significant increases of the models (0–8%). Finally, the interactions between the cues were non-existent suggesting that the cues operate mostly in an additive fashion, corroborating recent findings on emotional expression in music (Juslin and Lindström, 2010). PMID:23908642

  11. POEM: Identifying Joint Additive Effects on Regulatory Circuits

    PubMed Central

    Botzman, Maya; Nachshon, Aharon; Brodt, Avital; Gat-Viks, Irit

    2016-01-01

    Motivation: Expression Quantitative Trait Locus (eQTL) mapping tackles the problem of identifying variation in DNA sequence that have an effect on the transcriptional regulatory network. Major computational efforts are aimed at characterizing the joint effects of several eQTLs acting in concert to govern the expression of the same genes. Yet, progress toward a comprehensive prediction of such joint effects is limited. For example, existing eQTL methods commonly discover interacting loci affecting the expression levels of a module of co-regulated genes. Such “modularization” approaches, however, are focused on epistatic relations and thus have limited utility for the case of additive (non-epistatic) effects. Results: Here we present POEM (Pairwise effect On Expression Modules), a methodology for identifying pairwise eQTL effects on gene modules. POEM is specifically designed to achieve high performance in the case of additive joint effects. We applied POEM to transcription profiles measured in bone marrow-derived dendritic cells across a population of genotyped mice. Our study reveals widespread additive, trans-acting pairwise effects on gene modules, characterizes their organizational principles, and highlights high-order interconnections between modules within the immune signaling network. These analyses elucidate the central role of additive pairwise effect in regulatory circuits, and provide computational tools for future investigations into the interplay between eQTLs. Availability: The software described in this article is available at csgi.tau.ac.il/POEM/. PMID:27148351

  12. Leading by Example: The Case of Leader OCB

    ERIC Educational Resources Information Center

    Yaffe, Tal; Kark, Ronit

    2011-01-01

    The importance of leading by personal example or role modeling for effective leadership has been recognized in many leadership theories. However, leaders' ability to influence group behavior through exemplary behavior has received little attention in empirical work. This study explores leading by example through theoretical development and…

  13. Exact example of backreaction of small scale inhomogeneities in cosmology

    NASA Astrophysics Data System (ADS)

    Green, Stephen; Wald, Robert

    2013-04-01

    We construct a one-parameter family of polarized vacuum Gowdy spacetimes on a torus. In the limit as the parameter N goes to infinity, the metric uniformly approaches a smooth ``background metric.'' However, spacetime derivatives of the metric do not approach a limit. As a result, we find that the background metric itself is not a solution of the vacuum Einstein equation. Rather, it is a solution of the Einstein equation with an ``effective stress-energy tensor,'' which is traceless and satisfies the weak energy condition. This is an explicit example of backreaction due to small scale inhomogeneities. We comment on the non-vacuum case, where we have proven in previous work that, provided the matter stress-energy tensor satisfies the weak energy condition, no additional backreaction is possible.

  14. How Can Students Generalize Examples? Focusing on the Generalizing Geometric Properties

    ERIC Educational Resources Information Center

    Park, JinHyeong; Kim, Dong-Won

    2017-01-01

    The purpose of this study is to determine the progression of exemplifying and example generalization by students. We investigated whether example generalization occurs by analyzing collected data by identifying whether students recognize, describe, and define general features of geometric examples. We also investigate how example generalization…

  15. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  16. Dynamic Network-Based Epistasis Analysis: Boolean Examples

    PubMed Central

    Azpeitia, Eugenio; Benítez, Mariana; Padilla-Longoria, Pablo; Espinosa-Soto, Carlos; Alvarez-Buylla, Elena R.

    2011-01-01

    In this article we focus on how the hierarchical and single-path assumptions of epistasis analysis can bias the inference of gene regulatory networks. Here we emphasize the critical importance of dynamic analyses, and specifically illustrate the use of Boolean network models. Epistasis in a broad sense refers to gene interactions, however, as originally proposed by Bateson, epistasis is defined as the blocking of a particular allelic effect due to the effect of another allele at a different locus (herein, classical epistasis). Classical epistasis analysis has proven powerful and useful, allowing researchers to infer and assign directionality to gene interactions. As larger data sets are becoming available, the analysis of classical epistasis is being complemented with computer science tools and system biology approaches. We show that when the hierarchical and single-path assumptions are not met in classical epistasis analysis, the access to relevant information and the correct inference of gene interaction topologies is hindered, and it becomes necessary to consider the temporal dynamics of gene interactions. The use of dynamical networks can overcome these limitations. We particularly focus on the use of Boolean networks that, like classical epistasis analysis, relies on logical formalisms, and hence can complement classical epistasis analysis and relax its assumptions. We develop a couple of theoretical examples and analyze them from a dynamic Boolean network model perspective. Boolean networks could help to guide additional experiments and discern among alternative regulatory schemes that would be impossible or difficult to infer without the elimination of these assumption from the classical epistasis analysis. We also use examples from the literature to show how a Boolean network-based approach has resolved ambiguities and guided epistasis analysis. Our article complements previous accounts, not only by focusing on the implications of the hierarchical and

  17. 29 CFR 4022.104 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) surviving Charlie in the following order: spouse, children, parents, estate and next of kin. (2) Example 2... following order: spouse, children, parents, estate, next of kin. (b) C&C annuity with underpayment. At the... order: spouse, children, parents, estate and next of kin. ...

  18. 29 CFR 4022.104 - Examples.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) surviving Charlie in the following order: spouse, children, parents, estate and next of kin. (2) Example 2... following order: spouse, children, parents, estate, next of kin. (b) C&C annuity with underpayment. At the... order: spouse, children, parents, estate and next of kin. ...

  19. 29 CFR 4022.104 - Examples.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) surviving Charlie in the following order: spouse, children, parents, estate and next of kin. (2) Example 2... following order: spouse, children, parents, estate, next of kin. (b) C&C annuity with underpayment. At the... order: spouse, children, parents, estate and next of kin. ...

  20. 29 CFR 4022.104 - Examples.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) surviving Charlie in the following order: spouse, children, parents, estate and next of kin. (2) Example 2... following order: spouse, children, parents, estate, next of kin. (b) C&C annuity with underpayment. At the... order: spouse, children, parents, estate and next of kin. ...

  1. Encouraging Example Generation: A Teaching Experiment in First-Semester Calculus

    ERIC Educational Resources Information Center

    Wagner, Elaine Rumsey; Orme, Susan Marla; Turner, Heidi Jean; Yopp, David

    2017-01-01

    Mathematicians use example generation to test and verify mathematical ideas; however, the processes through which undergraduates learn to productively generate examples are not well understood. We engaged calculus students in a teaching experiment designed to develop skills in productively generating examples to learn novel concepts. This article…

  2. Do Example Sentences Work in Direct Vocabulary Learning?

    ERIC Educational Resources Information Center

    Baicheng, Zhang

    2009-01-01

    In the present study of language learning, three presentation modes (varying from providing or not providing example sentences by the teacher and by the students themselves) have been utilised to examine the effectiveness of using example sentences in vocabulary presentation and learning activities. The study is of 58 English majors as the…

  3. Preparing Students in Online Debates with Worked Examples

    ERIC Educational Resources Information Center

    Tollison, Scott; Xie, Kui

    2012-01-01

    The current study investigates the effects of preparing students for an online debate through a worked example in terms of student perception, participation, and level of cognitive skills. The study found that students prepared for online debate through a worked example participated more frequently, wrote more words or phrases that encouraged the…

  4. Using generalized additive (mixed) models to analyze single case designs.

    PubMed

    Shadish, William R; Zuur, Alain F; Sullivan, Kristynn J

    2014-04-01

    This article shows how to apply generalized additive models and generalized additive mixed models to single-case design data. These models excel at detecting the functional form between two variables (often called trend), that is, whether trend exists, and if it does, what its shape is (e.g., linear and nonlinear). In many respects, however, these models are also an ideal vehicle for analyzing single-case designs because they can consider level, trend, variability, overlap, immediacy of effect, and phase consistency that single-case design researchers examine when interpreting a functional relation. We show how these models can be implemented in a wide variety of ways to test whether treatment is effective, whether cases differ from each other, whether treatment effects vary over cases, and whether trend varies over cases. We illustrate diagnostic statistics and graphs, and we discuss overdispersion of data in detail, with examples of quasibinomial models for overdispersed data, including how to compute dispersion and quasi-AIC fit indices in generalized additive models. We show how generalized additive mixed models can be used to estimate autoregressive models and random effects and discuss the limitations of the mixed models compared to generalized additive models. We provide extensive annotated syntax for doing all these analyses in the free computer program R. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

  5. Child-Specific Exposure Scenarios Examples (Final Report) ...

    EPA Pesticide Factsheets

    EPA announced the availability of the final report, Child-Specific Exposure Scenarios Examples. This report is intended to be a companion document to the Exposure Factors Handbook (U.S. EPA 2011). The example scenarios were compiled from questions and inquiries received from users of the Exposure Factors Handbook (EFH) on how to select data from the EFH to assess childhood exposures. The scenarios presented in this report promote the use of the standard set of age groups recommended by the U.S. EPA in the report entitled Guidance on Selecting Age Groups for Monitoring and Assessing Childhood Exposures to Environmental Contaminants (U.S. EPA 2005). The purpose of the Child-Specific Exposure Scenarios Examples Report is to outline scenarios for various child-specific exposure pathways and to demonstrate how data from the Exposure Factors Handbook (U.S. EPA, 2011) may be applied for estimating exposures. The handbook provides data on drinking water consumption, soil ingestion, mouthing behavior, inhalation rates, dermal factors including skin area and soil adherence factors, consumption of fruits and vegetables, fish, meats, dairy products, homegrown foods, human milk, activity patterns, body weight, and consumer products. The example scenarios presented here have been selected to best demonstrate the use of the various key data sets in the Child-Specific Exposure Factors Handbook (U.S. EPA, 2008a), and represent commonly encountered exposure pathways. An exhausti

  6. 48 CFR 22.1003-5 - Some examples of contracts covered.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Some examples of contracts... SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Service Contract Act of 1965, as Amended 22.1003-5 Some examples of contracts covered. The following examples, while not definitive or...

  7. Process-Oriented Worked Examples: Improving Transfer Performance through Enhanced Understanding

    ERIC Educational Resources Information Center

    van Gog, Tamara; Paas, Fred; van Merrienboer, Jeroen J. G.

    2004-01-01

    The research on worked examples has shown that for novices, studying worked examples is often a more effective and efficient way of learning than solving conventional problems. This theoretical paper argues that adding process-oriented information to worked examples can further enhance transfer performance, especially for complex cognitive skills…

  8. Arctic Forecasts Available from Polar Bear Exhibit as an Example of Formal/Informal Collaboration

    NASA Astrophysics Data System (ADS)

    Landis, C. E.; Cervenec, J.

    2012-12-01

    A subset of the general population enjoys and frequents informal education venues, offering an opportunity for lifelong learning that also enhances and supports formal education efforts. The Byrd Polar Research Center (BPRC) at The Ohio State University collaborated with the Columbus Zoo & Aquarium (CZA) in the development of their Polar Frontier exhibit, from its initial planning to the Grand Opening of the exhibit, through the present. Of course, the addition to the Zoo of polar bears and Arctic fox in the Polar Frontier has been very popular, with almost a 7% increase in visitors in 2010 when the exhibit opened. The CZA and BPRC are now investigating ways to increase the climate literacy impact of the exhibit, and to increase engagement with the topics through follow-on activities. For example, individuals or classes anywhere in the world can check forecasts from the Polar Weather and Research Forecasting model and compare them to observed conditions-- allowing deep investigation into changes in the Arctic. In addition, opportunities exist to adapt the Zoo School experience (affecting several Central Ohio school districts) and/or to enable regular participation through social media such as Facebook, Twitter, and other forms of digital communication. BPRC's sustained engagement with the CZA is an example of a trusted and meaningful partnership where open dialogue exists about providing the best learning experience for visitors. This presentation will share some of the lessons learned from this unique partnership, and strategies that are adopted to move it forward.

  9. A Qualitative Research on Example Generation Capabilities of University Students

    ERIC Educational Resources Information Center

    Saglam, Yasemin; Dost, Senol

    2016-01-01

    Examples which are used in exploring a procedure or comprehending/concretizing a mathematical concept are powerful teaching tools. Generating examples other than conventional ones is both a means for research and a pedagogical method. The aim of this study is to determine the transition process between example generation strategies, and the…

  10. Formal oxidative addition of a C-H bond by a 16e iridium(i) complex involves metal-ligand cooperation.

    PubMed

    Kumar, Amit; Feller, Moran; Ben-David, Yehoshoa; Diskin-Posner, Yael; Milstein, David

    2018-05-10

    The first example of oxidative addition of a C-H bond to a square planar d8-Iridium complex, without any external additive, such as an acid, is described. Our mechanistic investigations show that metal-ligand cooperation through aromatization-dearomatization of the lutidine backbone is involved in this process, and that the actual C-H activation step occurs through an Ir(iii) intermediate.

  11. Decontamination formulation with additive for enhanced mold remediation

    DOEpatents

    Tucker, Mark D [Albuquerque, NM; Irvine, Kevin [Huntsville, AL; Berger, Paul [Rome, NY; Comstock, Robert [Bel Air, MD

    2010-02-16

    Decontamination formulations with an additive for enhancing mold remediation. The formulations include a solubilizing agent (e.g., a cationic surfactant), a reactive compound (e.g., hydrogen peroxide), a carbonate or bicarbonate salt, a water-soluble bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate), a mold remediation enhancer containing Fe or Mn, and water. The concentration of Fe.sup.2+ or Mn.sup.2+ ions in the aqueous mixture is in the range of about 0.0001% to about 0.001%. The enhanced formulations can be delivered, for example, as a foam, spray, liquid, fog, mist, or aerosol for neutralization of chemical compounds, and for killing certain biological compounds or agents and mold spores, on contaminated surfaces and materials.

  12. 26 CFR 801.7 - Examples.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Examples. 801.7 Section 801.7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INTERNAL REVENUE PRACTICE BALANCED SYSTEM FOR MEASURING ORGANIZATIONAL AND EMPLOYEE PERFORMANCE WITHIN THE INTERNAL REVENUE SERVICE § 801.7...

  13. A Modular Aerospike Engine Design Using Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Peugeot, John; Garcia, Chance; Burkhardt, Wendel

    2014-01-01

    A modular aerospike engine concept has been developed with the objective of demonstrating the viability of the aerospike design using additive manufacturing techniques. The aerospike system is a self-compensating design that allows for optimal performance over the entire flight regime and allows for the lowest possible mass vehicle designs. At low altitudes, improvements in Isp can be traded against chamber pressure, staging, and payload. In upper stage applications, expansion ratio and engine envelope can be traded against nozzle efficiency. These features provide flexibility to the System Designer optimizing a complete vehicle stage. The aerospike concept is a good example of a component that has demonstrated improved performance capability, but traditionally has manufacturing requirements that are too expensive and complex to use in a production vehicle. In recent years, additive manufacturing has emerged as a potential method for improving the speed and cost of building geometrically complex components in rocket engines. It offers a reduction in tooling overhead and significant improvements in the integration of the designer and manufacturing method. In addition, the modularity of the engine design provides the ability to perform full scale testing on the combustion devices outside of the full engine configuration. The proposed design uses a hydrocarbon based gas-generator cycle, with plans to take advantage of existing powerhead hardware while focusing DDT&E resources on manufacturing and sub-system testing of the combustion devices. The major risks for the modular aerospike concept lie in the performance of the propellant feed system, the structural integrity of the additive manufactured components, and the aerodynamic efficiency of the exhaust flow.

  14. Supplier Selection Using Weighted Utility Additive Method

    NASA Astrophysics Data System (ADS)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  15. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  16. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  17. Ideals into Reality: Some Examples.

    ERIC Educational Resources Information Center

    Capuzzi, Dave; And Others

    Examples of innovations in college and adult reading reading programs in five states are described. At Maricopa Technical College (Arizona) adult students have access to a special reading program emphasizing the language experience approach, capitalizing on students' life experiences and oral language facility. Otero Junior College (Colorado)…

  18. Toxicogenomics concepts and applications to study hepatic effects of food additives and chemicals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stierum, Rob; Heijne, Wilbert; Kienhuis, Anne

    2005-09-01

    Transcriptomics, proteomics and metabolomics are genomics technologies with great potential in toxicological sciences. Toxicogenomics involves the integration of conventional toxicological examinations with gene, protein or metabolite expression profiles. An overview together with selected examples of the possibilities of genomics in toxicology is given. The expectations raised by toxicogenomics are earlier and more sensitive detection of toxicity. Furthermore, toxicogenomics will provide a better understanding of the mechanism of toxicity and may facilitate the prediction of toxicity of unknown compounds. Mechanism-based markers of toxicity can be discovered and improved interspecies and in vitro-in vivo extrapolations will drive model developments in toxicology. Toxicologicalmore » assessment of chemical mixtures will benefit from the new molecular biological tools. In our laboratory, toxicogenomics is predominantly applied for elucidation of mechanisms of action and discovery of novel pathway-supported mechanism-based markers of liver toxicity. In addition, we aim to integrate transcriptome, proteome and metabolome data, supported by bioinformatics to develop a systems biology approach for toxicology. Transcriptomics and proteomics studies on bromobenzene-mediated hepatotoxicity in the rat are discussed. Finally, an example is shown in which gene expression profiling together with conventional biochemistry led to the discovery of novel markers for the hepatic effects of the food additives butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole.« less

  19. Sierra/SolidMechanics 4.46 Example Problems Manual.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose

    Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

  20. Active learning in the presence of unlabelable examples

    NASA Technical Reports Server (NTRS)

    Mazzoni, Dominic; Wagstaff, Kiri

    2004-01-01

    We propose a new active learning framework where the expert labeler is allowed to decline to label any example. This may be necessary because the true label is unknown or because the example belongs to a class that is not part of the real training problem. We show that within this framework, popular active learning algorithms (such as Simple) may perform worse than random selection because they make so many queries to the unlabelable class. We present a method by which any active learning algorithm can be modified to avoid unlabelable examples by training a second classifier to distinguish between the labelable and unlabelable classes. We also demonstrate the effectiveness of the method on two benchmark data sets and a real-world problem.

  1. Tribal Green Building Administrative Code Example

    EPA Pesticide Factsheets

    This Tribal Green Building Administrative Code Example can be used as a template for technical code selection (i.e., building, electrical, plumbing, etc.) to be adopted as a comprehensive building code.

  2. Colloidal-based additive manufacturing of bio-inspired composites

    NASA Astrophysics Data System (ADS)

    Studart, Andre R.

    Composite materials in nature exhibit heterogeneous architectures that are tuned to fulfill the functional demands of the surrounding environment. Examples range from the cellulose-based organic structure of plants to highly mineralized collagen-based skeletal parts like bone and teeth. Because they are often utilized to combine opposing properties such as strength and low-density or stiffness and wear resistance, the heterogeneous architecture of natural materials can potentially address several of the technical limitations of artificial homogeneous composites. However, current man-made manufacturing technologies do not allow for the level of composition and fiber orientation control found in natural heterogeneous systems. In this talk, I will present two additive manufacturing technologies recently developed in our group to build composites with exquisite architectures only rivaled by structures made by living organisms in nature. Since the proposed techniques utilize colloidal suspensions as feedstock, understanding the physics underlying the stability, assembly and rheology of the printing inks is key to predict and control the architecture of manufactured parts. Our results will show that additive manufacturing routes offer a new exciting pathway for the fabrication of biologically-inspired composite materials with unprecedented architectures and functionalities.

  3. Novel view synthesis by interpolation over sparse examples

    NASA Astrophysics Data System (ADS)

    Liang, Bodong; Chung, Ronald C.

    2006-01-01

    Novel view synthesis (NVS) is an important problem in image rendering. It involves synthesizing an image of a scene at any specified (novel) viewpoint, given some images of the scene at a few sample viewpoints. The general understanding is that the solution should bypass explicit 3-D reconstruction of the scene. As it is, the problem has a natural tie to interpolation, despite that mainstream efforts on the problem have been adopting formulations otherwise. Interpolation is about finding the output of a function f(x) for any specified input x, given a few input-output pairs {(xi,fi):i=1,2,3,...,n} of the function. If the input x is the viewpoint, and f(x) is the image, the interpolation problem becomes exactly NVS. We treat the NVS problem using the interpolation formulation. In particular, we adopt the example-based everything or interpolation (EBI) mechanism-an established mechanism for interpolating or learning functions from examples. EBI has all the desirable properties of a good interpolation: all given input-output examples are satisfied exactly, and the interpolation is smooth with minimum oscillations between the examples. We point out that EBI, however, has difficulty in interpolating certain classes of functions, including the image function in the NVS problem. We propose an extension of the mechanism for overcoming the limitation. We also present how the extended interpolation mechanism could be used to synthesize images at novel viewpoints. Real image results show that the mechanism has promising performance, even with very few example images.

  4. Space physics education via examples in the undergraduate physics curriculum

    NASA Astrophysics Data System (ADS)

    Martin, R.; Holland, D. L.

    2011-12-01

    The field of space physics is rich with examples of basic physics and analysis techniques, yet it is rarely seen in physics courses or textbooks. As space physicists in an undergraduate physics department we like to use research to inform teaching, and we find that students respond well to examples from magnetospheric science. While we integrate examples into general education courses as well, this talk will focus on physics major courses. Space physics examples are typically selected to illustrate a particular concept or method taught in the course. Four examples will be discussed, from an introductory electricity and magnetism course, a mechanics/nonlinear dynamics course, a computational physics course, and a plasma physics course. Space physics provides examples of many concepts from introductory E&M, including the application of Faraday's law to terrestrial magnetic storm effects and the use of the basic motion of charged particles as a springboard to discussion of the inner magnetosphere and the aurora. In the mechanics and nonlinear dynamics courses, the motion of charged particles in a magnetotail current sheet magnetic field is treated as a Newtonian dynamical system, illustrating the Poincaré surface-of-section technique, the partitioning of phase space, and the KAM theorem. Neural network time series analysis of AE data is used as an example in the computational physics course. Finally, among several examples, current sheet particle dynamics is utilized in the plasma physics course to illustrate the notion of adiabatic/guiding center motion and the breakdown of the adiabatic approximation. We will present short descriptions of our pedagogy and student assignments in this "backdoor" method of space physics education.

  5. Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting

    PubMed Central

    Murr, Lawrence E.; Gaytan, Sara M.; Martinez, Edwin; Medina, Frank; Wicker, Ryan B.

    2012-01-01

    This paper presents some examples of knee and hip implant components containing porous structures and fabricated in monolithic forms utilizing electron beam melting (EBM). In addition, utilizing stiffness or relative stiffness versus relative density design plots for open-cellular structures (mesh and foam components) of Ti-6Al-4V and Co-29Cr-6Mo alloy fabricated by EBM, it is demonstrated that stiffness-compatible implants can be fabricated for optimal stress shielding for bone regimes as well as bone cell ingrowth. Implications for the fabrication of patient-specific, monolithic, multifunctional orthopaedic implants using EBM are described along with microstructures and mechanical properties characteristic of both Ti-6Al-4V and Co-29Cr-6Mo alloy prototypes, including both solid and open-cellular prototypes manufactured by additive manufacturing (AM) using EBM. PMID:22956957

  6. Learning Algebra from Worked Examples

    ERIC Educational Resources Information Center

    Lange, Karin E.; Booth, Julie L.; Newton, Kristie J.

    2014-01-01

    For students to be successful in algebra, they must have a truly conceptual understanding of key algebraic features as well as the procedural skills to complete a problem. One strategy to correct students' misconceptions combines the use of worked example problems in the classroom with student self-explanation. "Self-explanation" is the…

  7. A study of concept-based similarity approaches for recommending program examples

    NASA Astrophysics Data System (ADS)

    Hosseini, Roya; Brusilovsky, Peter

    2017-07-01

    This paper investigates a range of concept-based example recommendation approaches that we developed to provide example-based problem-solving support in the domain of programming. The goal of these approaches is to offer students a set of most relevant remedial examples when they have trouble solving a code comprehension problem where students examine a program code to determine its output or the final value of a variable. In this paper, we use the ideas of semantic-level similarity-based linking developed in the area of intelligent hypertext to generate examples for the given problem. To determine the best-performing approach, we explored two groups of similarity approaches for selecting examples: non-structural approaches focusing on examples that are similar to the problem in terms of concept coverage and structural approaches focusing on examples that are similar to the problem by the structure of the content. We also explored the value of personalized example recommendation based on student's knowledge levels and learning goal of the exercise. The paper presents concept-based similarity approaches that we developed, explains the data collection studies and reports the result of comparative analysis. The results of our analysis showed better ranking performance of the personalized structural variant of cosine similarity approach.

  8. The Use of Learning Study in Designing Examples for Teaching Physics

    NASA Astrophysics Data System (ADS)

    Guo, Jian-Peng; Yang, Ling-Yan; Ding, Yi

    2017-07-01

    Researchers have consistently demonstrated that studying multiple examples is more effective than studying one example because comparing multiple examples can promote schema construction and facilitate discernment of critical aspects. Teachers, however, are usually absent from those self-led text-based studies. In this experimental study, a learning study approach based on variation theory was adopted to examine the effectiveness of teachers' different ways of designing multiple examples in helping students learn a physics principle. Three hundred and fifty-one tenth-grade students learned to distinguish action-reaction from equilibrium (a) by comparing examples that varied critical aspects first separately and then simultaneously, or (b) by comparing examples that separately varied critical aspects only. Results showed that students with average academic attainment benefited more from comparing examples in the first condition. Students with higher academic attainment learned equally within both conditions. This finding supports the advantage of simultaneous variation. The characteristics of students and instructional support should be taken into account when considering the effectiveness of patterns of variation.

  9. Using Example Problems to Improve Student Learning in Algebra: Differentiating between Correct and Incorrect Examples

    ERIC Educational Resources Information Center

    Booth, Julie L.; Lange, Karin E.; Koedinger, Kenneth R.; Newton, Kristie J.

    2013-01-01

    In a series of two "in vivo" experiments, we examine whether correct and incorrect examples with prompts for self-explanation can be effective for improving students' conceptual understanding and procedural skill in Algebra when combined with guided practice. In Experiment 1, students working with the Algebra I Cognitive Tutor were randomly…

  10. Solid polymer electrolyte electrochemical storage cell containing a redox shuttle additive for overcharge protection

    DOEpatents

    Richardson, Thomas J.; Ross, Philip N.

    1999-01-01

    A class of organic redox shuttle additives is described, preferably comprising nitrogen-containing aromatics compounds, which can be used in a high temperature (85.degree. C. or higher) electrochemical storage cell comprising a positive electrode, a negative electrode, and a solid polymer electrolyte to provide overcharge protection to the cell. The organic redox additives or shuttles are characterized by a high diffusion coefficient of at least 2.1.times.10.sup.-8 cm.sup.2 /second and a high onset potential of 2.5 volts or higher. Examples of such organic redox shuttle additives include an alkali metal salt of 1,2,4-triazole, an alkali metal salt of imidazole, 2,3,5,6-tetramethylpyrazine, 1,3,5-tricyanobenzene, and a dialkali metal salt of 3-4-dihydroxy-3-cyclobutene-1,2-dione.

  11. Topology optimization and laser additive manufacturing in design process of efficiency lightweight aerospace parts

    NASA Astrophysics Data System (ADS)

    Fetisov, K. V.; Maksimov, P. V.

    2018-05-01

    The paper presents the application of topology optimization and laser additive manufacturing in the design of lightweight aerospace parts. At the beginning a brief overview of the topology optimization algorithm SIMP is given, one of the most commonly used algorithm in FEA software. After that, methodology of parts design with using topology optimization is discussed as well as issues related to designing for additive manufacturing. In conclusion, the practical application of the proposed methodologies is presented using the example of one complex assembly unit. As a result of the new design approach, the mass of product was reduced five times, and twenty parts were replaced by one.

  12. Response of non-added solutes during nutrient addition experiments in streams

    NASA Astrophysics Data System (ADS)

    Rodriguez-Cardona, B.; Wymore, A.; Koenig, L.; Coble, A. A.; McDowell, W. H.

    2015-12-01

    Nutrient addition experiments, such as Tracer Additions for Spiraling Curve Characterization (TASCC), have become widely popular as a means to study nutrient uptake dynamics in stream ecosystems. However, the impact of these additions on ambient concentrations of non-added solutes is often overlooked. TASCC addition experiments are ideal for assessing interactions among solutes because it allows for the characterization of multiple solute concentrations across a broad range of added nutrient concentrations. TASCC additions also require the addition of a conservative tracer (NaCl) to track changes in conductivity during the experimental manipulation. Despite its use as a conservative tracer, chloride (Cl) and its associated sodium (Na) might change the concentrations of other ions and non-added nutrients through ion exchange or other processes. Similarly, additions of biologically active solutes might change the concentrations of other non-added solutes. These methodological issues in nutrient addition experiments have been poorly addressed in the literature. Here we examine the response of non-added solutes to pulse additions (i.e. TASCC) of NaCl plus nitrate (NO3-), ammonium, and phosphate across biomes including temperate and tropical forests, and arctic taiga. Preliminary results demonstrate that non-added solutes respond to changes in the concentration of these added nutrients. For example, concentrations of dissolved organic nitrogen (DON) in suburban headwater streams of New Hampshire both increase and decrease in response to NO3- additions, apparently due to biotic processes. Similarly, cations such as potassium, magnesium, and calcium also increase during TASCC experiments, likely due to cation exchange processes associated with Na addition. The response of non-added solutes to short-term pulses of added nutrients and tracers needs to be carefully assessed to ensure that nutrient uptake metrics are accurate, and to detect biotic interactions that may

  13. 10 CFR 1706.9 - Examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

  14. 10 CFR 1706.9 - Examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

  15. 10 CFR 1706.9 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

  16. 10 CFR 1706.9 - Examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

  17. Using Example Problems to Improve Student Learning in Algebra: Differentiating between Correct and Incorrect Examples

    ERIC Educational Resources Information Center

    Booth, Julie L.; Lange, Karin E.; Koedinger, Kenneth R.; Newton, Kristie J.

    2013-01-01

    In a series of two in vivo experiments, we examine whether correct and incorrect examples with prompts for self-explanation can be effective for improving students' conceptual understanding and procedural skill in Algebra when combined with guided practice. In Experiment 1, students working with the Algebra I Cognitive Tutor were randomly assigned…

  18. Negative Example Selection for Protein Function Prediction: The NoGO Database

    PubMed Central

    Youngs, Noah; Penfold-Brown, Duncan; Bonneau, Richard; Shasha, Dennis

    2014-01-01

    Negative examples – genes that are known not to carry out a given protein function – are rarely recorded in genome and proteome annotation databases, such as the Gene Ontology database. Negative examples are required, however, for several of the most powerful machine learning methods for integrative protein function prediction. Most protein function prediction efforts have relied on a variety of heuristics for the choice of negative examples. Determining the accuracy of methods for negative example prediction is itself a non-trivial task, given that the Open World Assumption as applied to gene annotations rules out many traditional validation metrics. We present a rigorous comparison of these heuristics, utilizing a temporal holdout, and a novel evaluation strategy for negative examples. We add to this comparison several algorithms adapted from Positive-Unlabeled learning scenarios in text-classification, which are the current state of the art methods for generating negative examples in low-density annotation contexts. Lastly, we present two novel algorithms of our own construction, one based on empirical conditional probability, and the other using topic modeling applied to genes and annotations. We demonstrate that our algorithms achieve significantly fewer incorrect negative example predictions than the current state of the art, using multiple benchmarks covering multiple organisms. Our methods may be applied to generate negative examples for any type of method that deals with protein function, and to this end we provide a database of negative examples in several well-studied organisms, for general use (The NoGO database, available at: bonneaulab.bio.nyu.edu/nogo.html). PMID:24922051

  19. Learning from Comparing Multiple Examples: On the Dilemma of "Similar" or "Different"

    ERIC Educational Resources Information Center

    Guo, Jian-Peng; Pang, Ming Fai; Yang, Ling-Yan; Ding, Yi

    2012-01-01

    Although researchers have demonstrated that studying multiple examples is more effective than studying one example to facilitate learning, the principles found in the literature for designing multiple examples remain ambiguous. This paper reviews variation theory research on example design which sheds light on unclear issues regarding the effects…

  20. The Reduced Basis Method in Geosciences: Practical examples for numerical forward simulations

    NASA Astrophysics Data System (ADS)

    Degen, D.; Veroy, K.; Wellmann, F.

    2017-12-01

    Due to the highly heterogeneous character of the earth's subsurface, the complex coupling of thermal, hydrological, mechanical, and chemical processes, and the limited accessibility we have to face high-dimensional problems associated with high uncertainties in geosciences. Performing the obviously necessary uncertainty quantifications with a reasonable number of parameters is often not possible due to the high-dimensional character of the problem. Therefore, we are presenting the reduced basis (RB) method, being a model order reduction (MOR) technique, that constructs low-order approximations to, for instance, the finite element (FE) space. We use the RB method to address this computationally challenging simulations because this method significantly reduces the degrees of freedom. The RB method is decomposed into an offline and online stage, allowing to make the expensive pre-computations beforehand to get real-time results during field campaigns. Generally, the RB approach is most beneficial in the many-query and real-time context.We will illustrate the advantages of the RB method for the field of geosciences through two examples of numerical forward simulations.The first example is a geothermal conduction problem demonstrating the implementation of the RB method for a steady-state case. The second examples, a Darcy flow problem, shows the benefits for transient scenarios. In both cases, a quality evaluation of the approximations is given. Additionally, the runtimes for both the FE and the RB simulations are compared. We will emphasize the advantages of this method for repetitive simulations by showing the speed-up for the RB solution in contrast to the FE solution. Finally, we will demonstrate how the used implementation is usable in high-performance computing (HPC) infrastructures and evaluate its performance for such infrastructures. Hence, we will especially point out its scalability, yielding in an optimal usage on HPC infrastructures and normal working

  1. Example-based learning: effects of model expertise in relation to student expertise.

    PubMed

    Boekhout, Paul; van Gog, Tamara; van de Wiel, Margje W J; Gerards-Last, Dorien; Geraets, Jacques

    2010-12-01

    Worked examples are very effective for novice learners. They typically present a written-out ideal (didactical) solution for learners to study. This study used worked examples of patient history taking in physiotherapy that presented a non-didactical solution (i.e., based on actual performance). The effects of model expertise (i.e., worked example based on advanced, third-year student model or expert physiotherapist model) in relation to students' expertise (i.e., first- or second-year) were investigated. One hundred and thirty-four physiotherapy students (61 first-year and 73 second-year). Design was 2 × 2 factorial with factors 'Student Expertise' (first-year vs. second-year) and 'Model Expertise' (expert vs. advanced student). Within expertise levels, students were randomly assigned to the Expert Example or the Advanced Student Example condition. All students studied two examples (content depending on their assigned condition) and then completed a retention and test task. They rated their invested mental effort after each example and test task. Second-year students invested less mental effort in studying the examples, and in performing the retention and transfer tasks than first-year students. They also performed better on the retention test, but not on the transfer test. In contrast to our hypothesis, there was no interaction between student expertise and model expertise: all students who had studied the Expert examples performed better on the transfer test than students who had studied Advanced Student Examples. This study suggests that when worked examples are based on actual performance, rather than an ideal procedure, expert models are to be preferred over advanced student models.

  2. Pedagogies in Action: A Community Resource Linking Teaching Methods to Examples of their Use

    NASA Astrophysics Data System (ADS)

    Manduca, C. A.; Fox, S. P.; Iverson, E. A.; Kirk, K.; Ormand, C. J.

    2009-12-01

    The Pedagogies in Action portal (http://serc.carleton.edu/sp) provides access to information on more than 40 teaching methods with examples of their use in geoscience and beyond. Each method is described with pages addressing what the method is, why or when it is useful, and how it can be implemented. New methods added this year include Teaching with Google Earth, Jigsaw, Teaching the Process of Science, Guided Discovery Problems, Teaching Urban Students, and Using ConceptTests. Examples then show specifically how the method has been used to teach concepts in a variety of disciplines. The example collection now includes 775 teaching activities of which more than 550 are drawn from the geosciences. Geoscience faculty are invited to add their own examples to this collection or to test examples in the collection and provide a review. Evaluation results show that the combination of modules and activities inspires teachers at all levels to use a new pedagogy and increases their confidence that they can use it successfully. In addition, submitting activities to the collection, including writing summary information for other instructors, helps them think more carefully about the design of their activity. The activity collections are used both for ready to use activities and to find ideas for new activities. The portal provides overarching access to materials developed by a wide variety of collaborating partners each of which uses the service to create a customized pedagogic portal addressing a more specific audience. Of interest to AGU members are pedagogic portals on Starting Point: Teaching Introductory Geoscience (http://serc.carleton.edu/introgeo); On the Cutting Edge (http://serc.carleton.edu/NAGTWorkshops); Enduring Resources for Earth System Education (http://earthref.org/ERESE) Microbial Life Educational Resources (http://serc.carleton.edu/microbe_life); the National Numeracy Network (http://serc.carleton.edu/nnn/index.html); CAUSE: The Consortium for

  3. Support for Struggling Students in Algebra: Contributions of Incorrect Worked Examples

    ERIC Educational Resources Information Center

    Barbieri, Christina; Booth, Julie L.

    2016-01-01

    Middle school algebra students (N = 125) randomly assigned within classroom to a Problem-solving control group, a Correct worked examples control group, or an Incorrect worked examples group, completed an experimental classroom study to assess the differential effects of incorrect examples versus the two control groups on students' algebra…

  4. Design Principles of Worked Examples: A Review of the Empirical Studies

    ERIC Educational Resources Information Center

    Shen, Chun-Yi; Tsai, Hui-Chun

    2009-01-01

    Many researchers investigated the efficacy of using worked examples in classroom instruction and provided evidence in the effectiveness of worked example instruction in mathematics, computer programming, physics, and etc. However, there are limited studies in worked example design. The purpose of this study is to generate the instructional design…

  5. Examples in College Algebra Textbooks: Opportunities for Students' Learning

    ERIC Educational Resources Information Center

    Mesa, Vilma; Suh, Heejoo; Blake, Tyler; Whittemore, Timothy

    2012-01-01

    We present an analysis of several characteristics of examples in 10 college algebra textbooks used in community colleges or 4-year institutions. We analyzed the examples along four dimensions: cognitive demand, the responses expected, the use of representations, and the strategies available for verifying the correctness of the solutions. We found…

  6. Toward an Instructionally Oriented Theory of Example-Based Learning

    ERIC Educational Resources Information Center

    Renkl, Alexander

    2014-01-01

    Learning from examples is a very effective means of initial cognitive skill acquisition. There is an enormous body of research on the specifics of this learning method. This article presents an instructionally oriented theory of example-based learning that integrates theoretical assumptions and findings from three research areas: learning from…

  7. 16 CFR 313.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Model privacy form and examples. 313.2... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 313.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions in appendix...

  8. 16 CFR 313.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Model privacy form and examples. 313.2... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 313.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions in appendix...

  9. 12 CFR 1016.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Model privacy form and examples. 1016.2 Section 1016.2 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 1016.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  10. 16 CFR 313.2 - Model privacy form and examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Model privacy form and examples. 313.2... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 313.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions in appendix...

  11. 12 CFR 1016.2 - Model privacy form and examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Model privacy form and examples. 1016.2 Section 1016.2 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 1016.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  12. 16 CFR 313.2 - Model privacy form and examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Model privacy form and examples. 313.2... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 313.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions in appendix...

  13. 12 CFR 1016.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Model privacy form and examples. 1016.2 Section 1016.2 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 1016.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  14. 16 CFR 313.2 - Model privacy form and examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Model privacy form and examples. 313.2... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 313.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions in appendix...

  15. The Effects of Examples on the Comprehension of Textbooks.

    ERIC Educational Resources Information Center

    Twohig, Paul T.

    A study was conducted to examine learning from textbook sentences that provide examples. It was predicted that an example written succinctly and with a word order that emphasized its parallel semantic relations with the exemplified principle, such as "animals have parasites; dogs have fleas," would have a positive effect on idea comprehension. It…

  16. Using protistan examples to dispel the myths of intelligent design.

    PubMed

    Farmer, Mark A; Habura, Andrea

    2010-01-01

    In recent years the teaching of the religiously based philosophy of intelligent design (ID) has been proposed as an alternative to modern evolutionary theory. Advocates of ID are largely motivated by their opposition to naturalistic explanations of biological diversity, in accordance with their goal of challenging the philosophy of scientific materialism. Intelligent design has been embraced by a wide variety of creationists who promote highly questionable claims that purport to show the inadequacy of evolutionary theory, which they consider to be a threat to a theistic worldview. We find that examples from protistan biology are well suited for providing evidence of many key evolutionary concepts, and have often been misrepresented or roundly ignored by ID advocates. These include examples of adaptations and radiations that are said to be statistically impossible, as well as examples of speciation both in the laboratory and as documented in the fossil record. Because many biologists may not be familiar with the richness of the protist evolution dataset or with ID-based criticisms of evolution, we provide examples of current ID arguments and specific protistan counter-examples.

  17. Interesting examples of supervised continuous variable systems

    NASA Technical Reports Server (NTRS)

    Chase, Christopher; Serrano, Joe; Ramadge, Peter

    1990-01-01

    The authors analyze two simple deterministic flow models for multiple buffer servers which are examples of the supervision of continuous variable systems by a discrete controller. These systems exhibit what may be regarded as the two extremes of complexity of the closed loop behavior: one is eventually periodic, the other is chaotic. The first example exhibits chaotic behavior that could be characterized statistically. The dual system, the switched server system, exhibits very predictable behavior, which is modeled by a finite state automaton. This research has application to multimodal discrete time systems where the controller can choose from a set of transition maps to implement.

  18. Examples of digital activites in tomorrow's Science classroom

    NASA Astrophysics Data System (ADS)

    Lardé, Arnaud

    2017-04-01

    Nowadays, Digital skills are very important for several reasons; First, almost any studies or works will need to master these skills; then, they are a new way to stimulate and motivate the pupils; You will find here examples of apps, ideas with tablets to use in your class keeping in mind that the most important is not to teach FOR the digital but BY the digital. Examples that will be exposed: - plickers - anatomy 4d - QR cod - edmodo - skitch

  19. Learning from Worked-Examples in Mathematics: Students Relate Procedures to Principles

    ERIC Educational Resources Information Center

    Renkl, Alexander

    2017-01-01

    This article discusses the relevance of the worked-example effect for mathematics education. This effect refers to the finding that, in initial cognitive skill acquisition, students profit more from studying worked examples as compared to solving problems. One reason for the effectiveness of worked examples is that the students get the opportunity…

  20. Testing the Model-Observer Similarity Hypothesis with Text-Based Worked Examples

    ERIC Educational Resources Information Center

    Hoogerheide, Vincent; Loyens, Sofie M. M.; Jadi, Fedora; Vrins, Anna; van Gog, Tamara

    2017-01-01

    Example-based learning is a very effective and efficient instructional strategy for novices. It can be implemented using text-based worked examples that provide a written demonstration of how to perform a task, or (video) modelling examples in which an instructor (the "model") provides a demonstration. The model-observer similarity (MOS)…

  1. Example-Tracing Tutors: Intelligent Tutor Development for Non-Programmers

    ERIC Educational Resources Information Center

    Aleven, Vincent; McLaren, Bruce M.; Sewall, Jonathan; van Velsen, Martin; Popescu, Octav; Demi, Sandra; Ringenberg, Michael; Koedinger, Kenneth R.

    2016-01-01

    In 2009, we reported on a new Intelligent Tutoring Systems (ITS) technology, example-tracing tutors, that can be built without programming using the Cognitive Tutor Authoring Tools (CTAT). Creating example-tracing tutors was shown to be 4-8 times as cost-effective as estimates for ITS development from the literature. Since 2009, CTAT and its…

  2. 12 CFR 573.2 - Model privacy form and examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  3. 12 CFR 332.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions...

  4. 12 CFR 216.2 - Model privacy form and examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

  5. 12 CFR 40.2 - Model privacy form and examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  6. 12 CFR 332.2 - Model privacy form and examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions...

  7. 12 CFR 573.2 - Model privacy form and examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  8. 12 CFR 40.2 - Model privacy form and examples.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  9. 12 CFR 216.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 2 2012-01-01 2012-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

  10. 12 CFR 40.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  11. 12 CFR 716.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions in Appendix...

  12. 12 CFR 216.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 2 2013-01-01 2013-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

  13. 12 CFR 573.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 6 2012-01-01 2012-01-01 false Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  14. 12 CFR 573.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  15. 12 CFR 332.2 - Model privacy form and examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions...

  16. 12 CFR 716.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions in Appendix...

  17. 12 CFR 332.2 - Model privacy form and examples.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions...

  18. 12 CFR 216.2 - Model privacy form and examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

  19. 12 CFR 40.2 - Model privacy form and examples.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  20. 12 CFR 216.2 - Model privacy form and examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

  1. 12 CFR 40.2 - Model privacy form and examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  2. 12 CFR 332.2 - Model privacy form and examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions...

  3. 12 CFR 573.2 - Model privacy form and examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

  4. 12 CFR 716.2 - Model privacy form and examples.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions in Appendix...

  5. Designing worked examples for learning tangent lines to circles

    NASA Astrophysics Data System (ADS)

    Retnowati, E.; Marissa

    2018-03-01

    Geometry is a branch of mathematics that deals with shape and space, including the circle. A difficult topic in the circle may be the tangent line to circle. This is considered a complex material since students have to simultaneously apply several principles to solve the problems, these are the property of circle, definition of the tangent, measurement and Pythagorean theorem. This paper discusses designs of worked examples for learning tangent line to circles and how to apply this design to an effective and efficient instructional activity. When students do not have sufficient prior knowledge, solving tangent problems might be clumsy, and as a consequence, the problem-solving activity hinders learning. According to a Cognitive Load Theory, learning occurs when students can construct new knowledge based on the relevant knowledge previously learned. When the relevant knowledge is unavailable, providing students with the worked example is suggested. Worked example may reduce unproductive process during learning that causes extraneous cognitive load. Nevertheless, worked examples must be created in such a way facilitate learning.

  6. 29 CFR 778.205 - Premiums for weekend and holiday work-example.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Premiums for weekend and holiday work-example. 778.205....205 Premiums for weekend and holiday work—example. The application of section 7(e)(6) may be illustrated by the following example: Suppose an agreement of employment calls for the payment of $7.50 an...

  7. Finding Feasible Abstract Counter-Examples

    NASA Technical Reports Server (NTRS)

    Pasareanu, Corina S.; Dwyer, Matthew B.; Visser, Willem; Clancy, Daniel (Technical Monitor)

    2002-01-01

    A strength of model checking is its ability to automate the detection of subtle system errors and produce traces that exhibit those errors. Given the high computational cost of model checking most researchers advocate the use of aggressive property-preserving abstractions. Unfortunately, the more aggressively a system is abstracted the more infeasible behavior it will have. Thus, while abstraction enables efficient model checking it also threatens the usefulness of model checking as a defect detection tool, since it may be difficult to determine whether a counter-example is feasible and hence worth developer time to analyze. We have explored several strategies for addressing this problem by extending an explicit-state model checker, Java PathFinder (JPF), to search for and analyze counter-examples in the presence of abstractions. We demonstrate that these techniques effectively preserve the defect detection ability of model checking in the presence of aggressive abstraction by applying them to check properties of several abstracted multi-threaded Java programs. These new capabilities are not specific to JPF and can be easily adapted to other model checking frameworks; we describe how this was done for the Bandera toolset.

  8. Planetary Protection: Two Relevant Terrestrial Examples

    NASA Astrophysics Data System (ADS)

    Chyba, C.

    2002-09-01

    Concerns about potential pathogens in returned samples from Mars ("Mars Sample Return: Issues and Recommendations", National Research Council, 1997) or planetary satellites ("Evaluating the Biological Potential in Samples Returned from Planetary Satellites and Small Solar System Bodies", National Research Council, 1998) focus on two potential types of pathogenesis, toxic and infectious. The National Research Council reports cited above state that the chances of extraterrestrial organisms proving either toxic or infectious to humans are extremely low, but cannot be entirely ruled out. Here I discuss recently discovered terrestrial examples relevant to each possibility, in order to make these concerns concrete. The first example concerns the production of hepatotoxins (toxins affecting the liver) and neurotoxins by cyanobacteria in glacial lakes on alpine pastures in Switzerland. In this example, mat-forming benthic cyanobacteria are implicated in a hundred cattle poisonings that have been reported from alpine pasteurs in southeastern Switzerland over the past twenty-five years (e.g. K. Mez et al, Hydrobiologia 368, 1-15 (1998)). It is unlikely that these cyanobacteria evolved the toxins in response to dairy cows; rather the susceptibility of cattle to these toxins seems simply to be an unfortunate coincidence of a toxin working across a large evolutionary distance. The second example concerns the recent demonstration that the decimation of shallow-water Caribbean elkhorn coral is due to infection by a common fecal enterobacterium associated with the human gut (K. L. Patterson et al., PNAS 99, 8725-8730 (2002)). The bacterium, Serratia marcenscens, is also a free-living microbe in water and soil, as well as an opportunistic pathogen in a variety of animal species. The distance between humans and corals emphasizes the possibility that certain organisms may prove pathogenic across a wide evolutionary divide. Of course, in neither of these cases are the evolutionary

  9. Quality Document Examples (Record of Decision of the Year Contest)

    EPA Pesticide Factsheets

    This page provides document examples with clear documentation that are consistent with the Superfund Program's policy and regulations. The examples provided here are the winners of the Superfund ROD of the Year Contest (1999-2004)

  10. 12 CFR 716.2 - Model privacy form and examples.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendixA of this part, consistent with the instructions in appendixA...

  11. Phosphate additives in food--a health risk.

    PubMed

    Ritz, Eberhard; Hahn, Kai; Ketteler, Markus; Kuhlmann, Martin K; Mann, Johannes

    2012-01-01

    Hyperphosphatemia has been identified in the past decade as a strong predictor of mortality in advanced chronic kidney disease (CKD). For example, a study of patients in stage CKD 5 (with an annual mortality of about 20%) revealed that 12% of all deaths in this group were attributable to an elevated serum phosphate concentration. Recently, a high-normal serum phosphate concentration has also been found to be an independent predictor of cardiovascular events and mortality in the general population. Therefore, phosphate additives in food are a matter of concern, and their potential impact on health may well have been underappreciated. We reviewed pertinent literature retrieved by a selective search of the PubMed and EU databases (www.zusatzstoffe-online.de, www.codexalimentarius.de), with the search terms "phosphate additives" and "hyperphosphatemia." There is no need to lower the content of natural phosphate, i.e. organic esters, in food, because this type of phosphate is incompletely absorbed; restricting its intake might even lead to protein malnutrition. On the other hand, inorganic phosphate in food additives is effectively absorbed and can measurably elevate the serum phosphate concentration in patients with advanced CKD. Foods with added phosphate tend to be eaten by persons at the lower end of the socioeconomic scale, who consume more processed and "fast" food. The main pathophysiological effect of phosphate is vascular damage, e.g. endothelial dysfunction and vascular calcification. Aside from the quality of phosphate in the diet (which also requires attention), the quantity of phosphate consumed by patients with advanced renal failure should not exceed 1000 mg per day, according to the guidelines. Prospective controlled trials are currently unavailable. In view of the high prevalence of CKD and the potential harm caused by phosphate additives to food, the public should be informed that added phosphate is damaging to health. Furthermore, calls for labeling

  12. Incorporating physical activity measures into environmental monitoring of national parks: an example from Yosemite.

    PubMed

    Walden-Schreiner, Chelsey; Leung, Yu-Fai; Floyd, Myron F

    2014-09-01

    To address increasing prevalence of obesity and associated chronic disease, recent national initiatives have called upon federal agencies to promote healthy lifestyles and provide opportunities for physical activity. In response, the U.S. National Park Service has developed strategies promoting health through physical activity in addition to its well-established biodiversity and landscape conservation mission. Incorporating physical activity measures with routine environmental monitoring would help identify areas where parks can promote active pursuits with minimal environmental impact. This study provides one example of how protocols developed for visitor and environmental monitoring can generate data to evaluate physical activity. Researchers implemented an observational study in high-use meadows of Yosemite National Park during the summer of 2011. Variables measured include the spatial location of visitors and activity type. Metabolic equivalents (METs) were assigned to activity categories and analyzed for average energy expenditure. Mean METs values indicated sedentary to light physical activity across the meadows, with greater means in areas with boardwalks or paved pathways. Data leveraged in this study provide park managers an example of adapting existing monitoring programs to incorporate indicators relevant to physical activity evaluation and how physical activity may impact resource conditions in national parks.

  13. Activation of carbon-hydrogen bonds and dihydrogen by 1,2-CH-addition across metal-heteroatom bonds.

    PubMed

    Webb, Joanna R; Burgess, Samantha A; Cundari, Thomas R; Gunnoe, T Brent

    2013-12-28

    The controlled conversion of hydrocarbons to functionalized products requires selective C-H bond cleavage. This perspective provides an overview of 1,2-CH-addition of hydrocarbons across d(0) transition metal imido complexes and compares and contrasts these to examples of analogous reactions that involve later transition metal amide, hydroxide and alkoxide complexes with d(6) and d(8) metals.

  14. USEPA EXAMPLE EXIT LEVEL ANALYSIS RESULTS

    EPA Science Inventory

    Developed by NERL/ERD for the Office of Solid Waste, the enclosed product provides an example uncertainty analysis (UA) and initial process-based sensitivity analysis (SA) of hazardous waste "exit" concentrations for 7 chemicals and metals using the 3MRA Version 1.0 Modeling Syst...

  15. 45 CFR 1170.13 - Illustrative examples.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... handicapped persons are not subjected to discrimination on the basis of handicap either by sub-grantees or by... HUMANITIES NATIONAL ENDOWMENT FOR THE HUMANITIES NONDISCRIMINATION ON THE BASIS OF HANDICAP IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES Discrimination Prohibited § 1170.13 Illustrative examples. (a) The...

  16. 45 CFR 1170.13 - Illustrative examples.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... handicapped persons are not subjected to discrimination on the basis of handicap either by sub-grantees or by... HUMANITIES NATIONAL ENDOWMENT FOR THE HUMANITIES NONDISCRIMINATION ON THE BASIS OF HANDICAP IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES Discrimination Prohibited § 1170.13 Illustrative examples. (a) The...

  17. 45 CFR 1170.13 - Illustrative examples.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... handicapped persons are not subjected to discrimination on the basis of handicap either by sub-grantees or by... HUMANITIES NATIONAL ENDOWMENT FOR THE HUMANITIES NONDISCRIMINATION ON THE BASIS OF HANDICAP IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES Discrimination Prohibited § 1170.13 Illustrative examples. (a) The...

  18. 45 CFR 1170.13 - Illustrative examples.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... handicapped persons are not subjected to discrimination on the basis of handicap either by sub-grantees or by... HUMANITIES NATIONAL ENDOWMENT FOR THE HUMANITIES NONDISCRIMINATION ON THE BASIS OF HANDICAP IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES Discrimination Prohibited § 1170.13 Illustrative examples. (a) The...

  19. 45 CFR 1170.13 - Illustrative examples.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... handicapped persons are not subjected to discrimination on the basis of handicap either by sub-grantees or by... HUMANITIES NATIONAL ENDOWMENT FOR THE HUMANITIES NONDISCRIMINATION ON THE BASIS OF HANDICAP IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES Discrimination Prohibited § 1170.13 Illustrative examples. (a) The...

  20. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  1. Quantitative benefit-harm assessment for setting research priorities: the example of roflumilast for patients with COPD.

    PubMed

    Puhan, Milo A; Yu, Tsung; Boyd, Cynthia M; Ter Riet, Gerben

    2015-07-02

    When faced with uncertainties about the effects of medical interventions regulatory agencies, guideline developers, clinicians, and researchers commonly ask for more research, and in particular for more randomized trials. The conduct of additional randomized trials is, however, sometimes not the most efficient way to reduce uncertainty. Instead, approaches such as value of information analysis or other approaches should be used to prioritize research that will most likely reduce uncertainty and inform decisions. In situations where additional research for specific interventions needs to be prioritized, we propose the use of quantitative benefit-harm assessments that illustrate how the benefit-harm balance may change as a consequence of additional research. The example of roflumilast for patients with chronic obstructive pulmonary disease shows that additional research on patient preferences (e.g., how important are exacerbations relative to psychiatric harms?) or outcome risks (e.g., what is the incidence of psychiatric outcomes in patients with chronic obstructive pulmonary disease without treatment?) is sometimes more valuable than additional randomized trials. We propose that quantitative benefit-harm assessments have the potential to explore the impact of additional research and to identify research priorities Our approach may be seen as another type of value of information analysis and as a useful approach to stimulate specific new research that has the potential to change current estimates of the benefit-harm balance and decision making.

  2. One corner of the third floor has examples of Edison ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    One corner of the third floor has examples of Edison motion picture projectors in rather poor condition. Better preserved examples are in storage in Vault #12. - Thomas A. Edison Laboratories, Building No. 5, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

  3. 26 CFR 1.825-3 - Examples.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

  4. 26 CFR 1.825-3 - Examples.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

  5. 26 CFR 1.825-3 - Examples.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

  6. 26 CFR 1.825-3 - Examples.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

  7. 12 CFR 24.6 - Examples of qualifying public welfare investments.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Examples of qualifying public welfare... COMMUNITY AND ECONOMIC DEVELOPMENT ENTITIES, COMMUNITY DEVELOPMENT PROJECTS, AND OTHER PUBLIC WELFARE INVESTMENTS § 24.6 Examples of qualifying public welfare investments. Investments that primarily support the...

  8. 12 CFR 24.6 - Examples of qualifying public welfare investments.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Examples of qualifying public welfare... COMMUNITY AND ECONOMIC DEVELOPMENT ENTITIES, COMMUNITY DEVELOPMENT PROJECTS, AND OTHER PUBLIC WELFARE INVESTMENTS § 24.6 Examples of qualifying public welfare investments. Investments that primarily support the...

  9. 26 CFR 1.312-4 - Examples of adjustments provided in section 312(c).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Examples of adjustments provided in section 312... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Effects on Corporation § 1.312-4 Examples of adjustments... examples: Example 1. On December 2, 1954, Corporation X distributed to its sole shareholder, A, an...

  10. Addition of flexible body option to the TOLA computer program, part 1

    NASA Technical Reports Server (NTRS)

    Dick, J. W.; Benda, B. J.

    1975-01-01

    This report describes a flexible body option that was developed and added to the Takeoff and Landing Analysis (TOLA) computer program. The addition of the flexible body option to TOLA allows it to be used to study essentially any conventional type airplane in the ground operating environment. It provides the capability to predict the total motion of selected points on the analytical methods incorporated in the program and operating instructions for the option are described. A program listing is included along with several example problems to aid in interpretation of the operating instructions and to illustrate program usage.

  11. The Effectiveness of Using Incorrect Examples to Support Learning about Decimal Magnitude

    ERIC Educational Resources Information Center

    Durkin, Kelley; Rittle-Johnson, Bethany

    2012-01-01

    Comparing common mathematical errors to correct examples may facilitate learning, even for students with limited prior domain knowledge. We examined whether studying incorrect and correct examples was more effective than studying two correct examples across prior knowledge levels. Fourth- and fifth-grade students (N = 74) learned about decimal…

  12. [Depopulation and aging: the example of Gers].

    PubMed

    Le Gleau, J P; Pradel De Lamaze, F

    1980-01-01

    The authors examine the process of depopulation and aging in a rural French community using the example of the department of Gers. Some projections of future population trends up to 1985 are included.

  13. Example Postings' Effects on Online Discussion and Cognitive Load

    ERIC Educational Resources Information Center

    Jin, Li

    2012-01-01

    This study investigated the effects of example-postings on students' cognitive load and performance in online discussions. Cognitive overload was assumed had caused the problem of the lack of reflective and thoughtful contributions in student discussions. The theoretical foundation supporting the use of example-postings aiming at reduce…

  14. The effect of additive geometry on the integration of secondary elements during Friction Stir Processing

    NASA Astrophysics Data System (ADS)

    Zens, A.; Gnedel, M.; Zaeh, M. F.; Haider, F.

    2018-06-01

    Friction Stir Processing (FSP) can be used to locally modify properties in materials such as aluminium. This may be used, for example, to produce a fine microstructure or to integrate secondary elements into the base material. The purpose of this work is to examine the effect of the properties of the metal additives on the resulting material distribution in the processed region. For this, commercially pure iron and copper were integrated into an EN AW-1050 aluminium base material using FSP. Iron in the form of powder, wire and foil as well as copper in powder form were assessed. The various additive forms represent materials with differing surface-to-volume ratios as well as varying dispersion characteristics in the processing zone. The processing parameters for each additive form remained constant; however, two- and four-pass FSP processes were conducted. The results of CT analysis proved especially insightful regarding the spatial distribution of the various additive form within the workpiece. As expected, the powder additive was most widely distributed within the welding zone. Micro-hardness mappings showed that the powder additive contributed to the hardness within the weld nugget in comparison to the processed material without secondary elements.

  15. Computer-Based Information Networks: Selected Examples.

    ERIC Educational Resources Information Center

    Hardesty, Larry

    The history, purpose, and operation of six computer-based information networks are described in general and nontechnical terms. In the introduction the many definitions of an information network are explored. Ohio College Library Center's network (OCLC) is the first example. OCLC began in 1963, and since early 1973 has been extending its services…

  16. 40 CFR Appendix X to Part 51 - Examples of Economic Incentive Programs

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 2 2010-07-01 2010-07-01 false Examples of Economic Incentive Programs... Appendix X to Part 51—Examples of Economic Incentive Programs I. Introduction and Purpose This appendix.... Examples of Stationary and Mobile Source Economic Incentive Strategies There is a wide variety of programs...

  17. Differentiating Instruction: Providing the Right Kinds of Worked Examples for Individual Students

    ERIC Educational Resources Information Center

    Booth, Julie L.; Koedinger, Kenneth R.; Newton, Kristie J.; Lange, Karin E.

    2013-01-01

    A plethora of laboratory studies have shown that including the study of worked examples during problem-solving practice improves learning (Sweller, 1999; Sweller & Cooper, 1985). While most worked-example research focuses on the use of correct examples, recent work suggests that asking children to explain a combination of correct and incorrect…

  18. 40 CFR Appendix X to Part 51 - Examples of Economic Incentive Programs

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 2 2014-07-01 2014-07-01 false Examples of Economic Incentive Programs... Appendix X to Part 51—Examples of Economic Incentive Programs I. Introduction and Purpose This appendix.... Examples of Stationary and Mobile Source Economic Incentive Strategies There is a wide variety of programs...

  19. 40 CFR Appendix X to Part 51 - Examples of Economic Incentive Programs

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 2 2011-07-01 2011-07-01 false Examples of Economic Incentive Programs... Appendix X to Part 51—Examples of Economic Incentive Programs I. Introduction and Purpose This appendix.... Examples of Stationary and Mobile Source Economic Incentive Strategies There is a wide variety of programs...

  20. 40 CFR Appendix X to Part 51 - Examples of Economic Incentive Programs

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 2 2012-07-01 2012-07-01 false Examples of Economic Incentive Programs... Appendix X to Part 51—Examples of Economic Incentive Programs I. Introduction and Purpose This appendix.... Examples of Stationary and Mobile Source Economic Incentive Strategies There is a wide variety of programs...

  1. 40 CFR Appendix X to Part 51 - Examples of Economic Incentive Programs

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 2 2013-07-01 2013-07-01 false Examples of Economic Incentive Programs... Appendix X to Part 51—Examples of Economic Incentive Programs I. Introduction and Purpose This appendix.... Examples of Stationary and Mobile Source Economic Incentive Strategies There is a wide variety of programs...

  2. Evaluation of the FIR Example using Xilinx Vivado High-Level Synthesis Compiler

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jin, Zheming; Finkel, Hal; Yoshii, Kazutomo

    Compared to central processing units (CPUs) and graphics processing units (GPUs), field programmable gate arrays (FPGAs) have major advantages in reconfigurability and performance achieved per watt. This development flow has been augmented with high-level synthesis (HLS) flow that can convert programs written in a high-level programming language to Hardware Description Language (HDL). Using high-level programming languages such as C, C++, and OpenCL for FPGA-based development could allow software developers, who have little FPGA knowledge, to take advantage of the FPGA-based application acceleration. This improves developer productivity and makes the FPGA-based acceleration accessible to hardware and software developers. Xilinx Vivado HLSmore » compiler is a high-level synthesis tool that enables C, C++ and System C specification to be directly targeted into Xilinx FPGAs without the need to create RTL manually. The white paper [1] published recently by Xilinx uses a finite impulse response (FIR) example to demonstrate the variable-precision features in the Vivado HLS compiler and the resource and power benefits of converting floating point to fixed point for a design. To get a better understanding of variable-precision features in terms of resource usage and performance, this report presents the experimental results of evaluating the FIR example using Vivado HLS 2017.1 and a Kintex Ultrascale FPGA. In addition, we evaluated the half-precision floating-point data type against the double-precision and single-precision data type and present the detailed results.« less

  3. 29 CFR 780.1008 - Examples of places not considered homes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Examples of places not considered homes. 780.1008 Section... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... considered homes. The following are examples of workplaces which, on examination, have been considered not to...

  4. 29 CFR 780.1008 - Examples of places not considered homes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Examples of places not considered homes. 780.1008 Section... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... considered homes. The following are examples of workplaces which, on examination, have been considered not to...

  5. Experimental and statistical post-validation of positive example EST sequences carrying peroxisome targeting signals type 1 (PTS1).

    PubMed

    Lingner, Thomas; Kataya, Amr R A; Reumann, Sigrun

    2012-02-01

    We recently developed the first algorithms specifically for plants to predict proteins carrying peroxisome targeting signals type 1 (PTS1) from genome sequences. As validated experimentally, the prediction methods are able to correctly predict unknown peroxisomal Arabidopsis proteins and to infer novel PTS1 tripeptides. The high prediction performance is primarily determined by the large number and sequence diversity of the underlying positive example sequences, which mainly derived from EST databases. However, a few constructs remained cytosolic in experimental validation studies, indicating sequencing errors in some ESTs. To identify erroneous sequences, we validated subcellular targeting of additional positive example sequences in the present study. Moreover, we analyzed the distribution of prediction scores separately for each orthologous group of PTS1 proteins, which generally resembled normal distributions with group-specific mean values. The cytosolic sequences commonly represented outliers of low prediction scores and were located at the very tail of a fitted normal distribution. Three statistical methods for identifying outliers were compared in terms of sensitivity and specificity." Their combined application allows elimination of erroneous ESTs from positive example data sets. This new post-validation method will further improve the prediction accuracy of both PTS1 and PTS2 protein prediction models for plants, fungi, and mammals.

  6. Experimental and statistical post-validation of positive example EST sequences carrying peroxisome targeting signals type 1 (PTS1)

    PubMed Central

    Lingner, Thomas; Kataya, Amr R. A.; Reumann, Sigrun

    2012-01-01

    We recently developed the first algorithms specifically for plants to predict proteins carrying peroxisome targeting signals type 1 (PTS1) from genome sequences.1 As validated experimentally, the prediction methods are able to correctly predict unknown peroxisomal Arabidopsis proteins and to infer novel PTS1 tripeptides. The high prediction performance is primarily determined by the large number and sequence diversity of the underlying positive example sequences, which mainly derived from EST databases. However, a few constructs remained cytosolic in experimental validation studies, indicating sequencing errors in some ESTs. To identify erroneous sequences, we validated subcellular targeting of additional positive example sequences in the present study. Moreover, we analyzed the distribution of prediction scores separately for each orthologous group of PTS1 proteins, which generally resembled normal distributions with group-specific mean values. The cytosolic sequences commonly represented outliers of low prediction scores and were located at the very tail of a fitted normal distribution. Three statistical methods for identifying outliers were compared in terms of sensitivity and specificity.” Their combined application allows elimination of erroneous ESTs from positive example data sets. This new post-validation method will further improve the prediction accuracy of both PTS1 and PTS2 protein prediction models for plants, fungi, and mammals. PMID:22415050

  7. Examples as an Instructional Tool in Mathematics and Science Classrooms: Teachers' Perceptions and Attitudes

    ERIC Educational Resources Information Center

    Huang, Xiaoxia; Cribbs, Jennifer

    2017-01-01

    This study examined mathematics and science teachers' perceptions and use of four types of examples, including typical textbook examples (standard worked examples) and erroneous worked examples in the written form as well as mastery modelling examples and peer modelling examples involving the verbalization of the problem-solving process. Data…

  8. Students' Views of Example Generation Tasks

    ERIC Educational Resources Information Center

    Breen, Sinead; O'Shea, Ann; Pfeiffer, Kirsten

    2016-01-01

    We report here on students' views of example generation tasks assigned to them in two first year undergraduate Calculus courses. The design and use of such tasks was undertaken as part of a project which aimed to afford students opportunities to develop their thinking skills and their conceptual understanding. In interviews with 10 students, we…

  9. Example-Based Super-Resolution Fluorescence Microscopy.

    PubMed

    Jia, Shu; Han, Boran; Kutz, J Nathan

    2018-04-23

    Capturing biological dynamics with high spatiotemporal resolution demands the advancement in imaging technologies. Super-resolution fluorescence microscopy offers spatial resolution surpassing the diffraction limit to resolve near-molecular-level details. While various strategies have been reported to improve the temporal resolution of super-resolution imaging, all super-resolution techniques are still fundamentally limited by the trade-off associated with the longer image acquisition time that is needed to achieve higher spatial information. Here, we demonstrated an example-based, computational method that aims to obtain super-resolution images using conventional imaging without increasing the imaging time. With a low-resolution image input, the method provides an estimate of its super-resolution image based on an example database that contains super- and low-resolution image pairs of biological structures of interest. The computational imaging of cellular microtubules agrees approximately with the experimental super-resolution STORM results. This new approach may offer potential improvements in temporal resolution for experimental super-resolution fluorescence microscopy and provide a new path for large-data aided biomedical imaging.

  10. 26 CFR 1.263(a)-2 - Examples of capital expenditures.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the capital of the corporation for any corporate purpose. Such amounts are capital investments and are... 26 Internal Revenue 3 2010-04-01 2010-04-01 false Examples of capital expenditures. 1.263(a)-2...) INCOME TAX (CONTINUED) INCOME TAXES Items Not Deductible § 1.263(a)-2 Examples of capital expenditures...

  11. 26 CFR 49.4261-8 - Examples of payments not subject to tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Examples of payments not subject to tax. 49.4261...) MISCELLANEOUS EXCISE TAXES FACILITIES AND SERVICES EXCISE TAXES Transportation of Persons § 49.4261-8 Examples..., 4293, or 4294 the following are examples of payments not subject to tax: (a) Exchange of prepaid order...

  12. 26 CFR 1.482-8 - Examples of the best method rule.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... illustrate the comparative analysis required to apply this rule. As with all of the examples in these... case. Example 10. Cost of services plus method preferred to other methods. (i) FP designs and...

  13. 26 CFR 1.482-8 - Examples of the best method rule.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... illustrate the comparative analysis required to apply this rule. As with all of the examples in these... case. Example 10. Cost of services plus method preferred to other methods. (i) FP designs and...

  14. 26 CFR 1.482-8 - Examples of the best method rule.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... illustrate the comparative analysis required to apply this rule. As with all of the examples in these... case. Example 10. Cost of services plus method preferred to other methods. (i) FP designs and...

  15. 26 CFR 1.482-8 - Examples of the best method rule.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... illustrate the comparative analysis required to apply this rule. As with all of the examples in these... case. Example 10. Cost of services plus method preferred to other methods. (i) FP designs and...

  16. Toasted vine-shoot chips as enological additive.

    PubMed

    Cebrián-Tarancón, Cristina; Sánchez-Gómez, Rosario; Salinas, M Rosario; Alonso, Gonzalo L; Oliva, José; Zalacain, Amaya

    2018-10-15

    Different ways of vine-shoots revalorization have been proposed, but not in wine yet, as for example in the same way as oak chips are being used. In this work, vine-shoot samples were submitted to a thermogravimetric analysis to establish the temperature range for its lignin structure decomposition, resulting between 160 and 180 °C. Then, vine-shoot chips from Airén and Cencibel cultivars, with a particle size around 2.5-3.5 cm, were submitted to six toasting conditions: 160 °C and 180 °C for 45, 60 and 75 min. Their volatile composition was very similar to oak chips, being vanillin the most important compound. Moreover, such vine-shoots have an interesting content of prodelphinidins that together with the stilbenes may contribute to wine antioxidant activity. The toasting conditions at 180 °C/45 min were the most suitable one for releasing the mentioned valuable compounds in order to propose vine-shoots as new enological additive similar to oak chips. Copyright © 2018. Published by Elsevier Ltd.

  17. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  18. Chemical stabilization of polymers: Implications for dermal exposure to additives.

    PubMed

    Bartsch, N; Girard, M; Schneider, L; Weijgert, V Van De; Wilde, A; Kappenstein, O; Vieth, B; Hutzler, C; Luch, A

    2018-04-16

    Technical benefits of additives in polymers stand in marked contrast to their associated health risks. Here, a multi-analyte method based on gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) was developed to quantify polymer additives in complex matrices such as low-density polyethylene (LDPE) and isolated human skin layers after dermal exposure ex vivo. That way both technical aspects and dermal exposure were investigated. The effects of polymer additivation on the material were studied using the example of LDPE. To this end, a tailor-made polymer was applied in aging studies that had been furnished with two different mixtures of phenol- and diarylamine-based antioxidants, plasticizers and processing aids. Upon accelerated thermo-oxidative aging of the material, the formation of LDPE degradation products was monitored with attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) spectroscopy. Compared to pure LDPE, a protective effect of added antioxidants could be observed on the integrity of the polymer. Further, thermo-oxidative degradation of the additives and its kinetics were investigated using LDPE or squalane as matrix. The half-lives of additives in both matrices revealed significant differences between the tested additives as well as between LDPE and squalane. For instance, 2-tert-butyl-6-[(3-tert-butyl-2-hydroxy-5-methylphenyl)methyl]-4-methylphenol (Antioxidant 2246) showed a half-life 12 times lower when incorporated in LDPE as compared to squalane. As a model for dermal exposure of consumers, human skin was brought into contact with the tailor-made LDPE containing additives ex vivo in static Franz diffusion cells. The skin was then analyzed for additives and decomposition products. This study proved 10 polymer additives of diverse pysicochemical properties and functionalities to migrate out of the polymer and eventually overcome the intact human skin barrier during contact. Moreover, their individual distribution within

  19. Examples and Case Studies for the 2012 Chemical Data Reporting

    EPA Pesticide Factsheets

    This document presents examples and case studies to help you in reporting for 2012 Chemical Data Reporting (CDR), formerly known as Inventory Update Reporting (IUR).EPA designed these examples to illustrate the new reporting requirements, which were published as part of the CDR Rule (published August 16, 2011), and to address general reporting issues from the 2006 IUR.

  20. Largest Ever Wind Power Commitments Sets Clean Energy Example for Nation

    Science.gov Websites

    'Largest Ever' Wind Power Commitments Sets Clean Energy Example for Nation NEWS MEDIA CONTACTS ;Federal agencies in Colorado are setting an example for the rest of the nation and the leaders of business

  1. Examples for Non-Ideal Solution Thermodynamics Study

    ERIC Educational Resources Information Center

    David, Carl W.

    2004-01-01

    A mathematical model of a non-ideal solution is presented, where it is shown how and where the non-ideality manifests itself in the standard thermodynamics tableau. Examples related to the non-ideal solution thermodynamics study are also included.

  2. Effects of Example Variability and Prior Knowledge in How Students Learn to Solve Equations

    ERIC Educational Resources Information Center

    Guo, Jian-Peng; Yang, Ling-Yan; Ding, Yi

    2014-01-01

    Researchers have consistently demonstrated that multiple examples are better than one example in facilitating learning because the comparison evoked by multiple examples supports learning and transfer. However, research outcomes are unclear regarding the effects of example variability and prior knowledge on learning from comparing multiple…

  3. Teaching the First Law of Thermodynamics via Real-Life Examples

    NASA Astrophysics Data System (ADS)

    Chang, Wheijen

    2011-04-01

    The literature has revealed that many students encounter substantial difficulties in applying the first law of thermodynamics. For example, university students sometimes fail to recognize that heat and work are independent means of energy transfer. When discussing adiabatic processes for an ideal gas, few students can correctly refer to the concept of "work" to justify a change in temperature. Some students adopt the notion that "collisions between molecules produce heat" to explain the rise in temperature for an adiabatic compression process.2 When explaining processes entailing temperature variation, students tend to adopt the ideal-gas law.1,2 Although most university students have acquired a reasonable grasp of the state-function concept, which is valid for variation of internal energy, they fail to grasp the concept that work depends not only on the states but also the processes. Thus, they are unable to use the first law effectively.3 In order to help students comprehend the meaning, usages, and value of the first law, and to realize that the ideal-gas law itself is insufficient to analyze many real-life examples, this paper introduces four examples, some of which can be demonstrated in the classroom. The examples have been devised and gradually modified over a period of several years based on implementation in a calculus-based introductory physics course. Details of when, how, and why each example is adopted, along with the students' pitfalls, are described below.

  4. Hydrogen addition reactions of aliphatic hydrocarbons in comets

    NASA Astrophysics Data System (ADS)

    Kobayashi, Hitomi; Watanabe, N.; Watanabe, Y.; Fukushima, T.; Kawakita, H.

    2013-10-01

    Comets are thought as remnants of early solar nebula. Their chemical compositions are precious clue to chemical and physical evolution of the proto-planetary disk. Some hydrocarbons such as C2H6, C2H2 and CH4 in comets have been observed by using near-infrared spectroscopy. Although the compositions of C2H6 were about 1% relative to the water in normal comets, there are few reports on the detection of C2H6 in ISM. Some formation mechanisms of C2H6 in ISM have been proposed, and there are two leading hypotheses; one is the dimerizations of CH3 and another is the hydrogen addition reactions of C2H2 on cold icy grains. To evaluate these formation mechanisms for cometary C2H6 quantitatively, it is important to search the C2H4 in comets, which is the intermediate product of the hydrogen addition reactions toward C2H6. However, it is very difficult to detect the C2H4 in comets in NIR (3 microns) regions because of observing circumstances. The hydrogen addition reactions of C2H2 at low temperature conditions are not well characterized both theoretically and experimentally. For example, there are no reports on the reaction rate coefficients of those reaction system. To determine the production rates of those hydrogen addition reactions, we performed the laboratory experiments of the hydrogenation of C2H2 and C2H4. We used four types of the initial composition of the ices: pure C2H4, pure C2H2, C2H2 on amorphous solid water (ASW) and C2H4 on ASW at three different temperatures of 10, 20, and 30K. We found 1) reactions are more efficient when there are ASW in the initial compositions of the ice; 2) hydrogenation of C2H4 occur more rapid than that of C2H2.

  5. Surprise! Infants consider possible bases of generalization for a single input example.

    PubMed

    Gerken, LouAnn; Dawson, Colin; Chatila, Razanne; Tenenbaum, Josh

    2015-01-01

    Infants have been shown to generalize from a small number of input examples. However, existing studies allow two possible means of generalization. One is via a process of noting similarities shared by several examples. Alternatively, generalization may reflect an implicit desire to explain the input. The latter view suggests that generalization might occur when even a single input example is surprising, given the learner's current model of the domain. To test the possibility that infants are able to generalize based on a single example, we familiarized 9-month-olds with a single three-syllable input example that contained either one surprising feature (syllable repetition, Experiment 1) or two features (repetition and a rare syllable, Experiment 2). In both experiments, infants generalized only to new strings that maintained all of the surprising features from familiarization. This research suggests that surprise can promote very rapid generalization. © 2014 John Wiley & Sons Ltd.

  6. Equivalence of time and aperture domain additive noise in ultrasound coherence.

    PubMed

    Bottenus, Nick B; Trahey, Gregg E

    2015-01-01

    Ultrasonic echoes backscattered from diffuse media, recorded by an array transducer and appropriately focused, demonstrate coherence predicted by the van Cittert-Zernike theorem. Additive noise signals from off-axis scattering, reverberation, phase aberration, and electronic (thermal) noise can all superimpose incoherent or partially coherent signals onto the recorded echoes, altering the measured coherence. An expression is derived to describe the effect of uncorrelated random channel noise in terms of the noise-to-signal ratio. Equivalent descriptions are made in the aperture dimension to describe uncorrelated magnitude and phase apodizations of the array. Binary apodization is specifically described as an example of magnitude apodization and adjustments are presented to minimize the artifacts caused by finite signal length. The effects of additive noise are explored in short-lag spatial coherence imaging, an image formation technique that integrates the calculated coherence curve of acquired signals up to a small fraction of the array length for each lateral and axial location. A derivation of the expected contrast as a function of noise-to-signal ratio is provided and validation is performed in simulation.

  7. Exploiting Carvone to Demonstrate Both Stereocontrol and Regiocontrol: 1,2- vs 1,4-Addition of Grignard Reagents and Organocuprates

    ERIC Educational Resources Information Center

    Truong, Thai Phat; Bailey, Sophia J.; Golliher, Alexandra E.; Monroy, Erika Y.; Shrestha, Uttar K.; Maio, William A.

    2018-01-01

    The ability of certain organometallic reagents to react via 1,2- or 1,4-addition to an a,ß-unsaturated ketone is a fundamental example of regioselectivity at the second-year undergraduate organic level. The following two experiments were designed to demonstrate this preference by exploiting carvone as an inexpensive chiral, nonracemic substrate.…

  8. The contribution of additive genetic variation to personality variation: heritability of personality.

    PubMed

    Dochtermann, Ned A; Schwab, Tori; Sih, Andrew

    2015-01-07

    Individual animals frequently exhibit repeatable differences from other members of their population, differences now commonly referred to as 'animal personality'. Personality differences can arise, for example, from differences in permanent environmental effects--including parental and epigenetic contributors--and the effect of additive genetic variation. Although several studies have evaluated the heritability of behaviour, less is known about general patterns of heritability and additive genetic variation in animal personality. As overall variation in behaviour includes both the among-individual differences that reflect different personalities and temporary environmental effects, it is possible for personality to be largely genetically influenced even when heritability of behaviour per se is quite low. The relative contribution of additive genetic variation to personality variation can be estimated whenever both repeatability and heritability are estimated for the same data. Using published estimates to address this issue, we found that approximately 52% of animal personality variation was attributable to additive genetic variation. Thus, while the heritability of behaviour is often moderate or low, the heritability of personality is much higher. Our results therefore (i) demonstrate that genetic differences are likely to be a major contributor to variation in animal personality and (ii) support the phenotypic gambit: that evolutionary inferences drawn from repeatability estimates may often be justified. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  9. Regression Analysis by Example. 5th Edition

    ERIC Educational Resources Information Center

    Chatterjee, Samprit; Hadi, Ali S.

    2012-01-01

    Regression analysis is a conceptually simple method for investigating relationships among variables. Carrying out a successful application of regression analysis, however, requires a balance of theoretical results, empirical rules, and subjective judgment. "Regression Analysis by Example, Fifth Edition" has been expanded and thoroughly…

  10. Adaptive Markov Random Fields for Example-Based Super-resolution of Faces

    NASA Astrophysics Data System (ADS)

    Stephenson, Todd A.; Chen, Tsuhan

    2006-12-01

    Image enhancement of low-resolution images can be done through methods such as interpolation, super-resolution using multiple video frames, and example-based super-resolution. Example-based super-resolution, in particular, is suited to images that have a strong prior (for those frameworks that work on only a single image, it is more like image restoration than traditional, multiframe super-resolution). For example, hallucination and Markov random field (MRF) methods use examples drawn from the same domain as the image being enhanced to determine what the missing high-frequency information is likely to be. We propose to use even stronger prior information by extending MRF-based super-resolution to use adaptive observation and transition functions, that is, to make these functions region-dependent. We show with face images how we can adapt the modeling for each image patch so as to improve the resolution.

  11. Interpretations of family size distributions: The Datura example

    NASA Astrophysics Data System (ADS)

    Henych, Tomáš; Holsapple, Keith A.

    2018-04-01

    Young asteroid families are unique sources of information about fragmentation physics and the structure of their parent bodies, since their physical properties have not changed much since their birth. Families have different properties such as age, size, taxonomy, collision severity and others, and understanding the effect of those properties on our observations of the size-frequency distribution (SFD) of family fragments can give us important insights into the hypervelocity collision processes at scales we cannot achieve in our laboratories. Here we take as an example the very young Datura family, with a small 8-km parent body, and compare its size distribution to other families, with both large and small parent bodies, and created by both catastrophic and cratering formation events. We conclude that most likely explanation for the shallower size distribution compared to larger families is a more pronounced observational bias because of its small size. Its size distribution is perfectly normal when its parent body size is taken into account. We also discuss some other possibilities. In addition, we study another common feature: an offset or "bump" in the distribution occurring for a few of the larger elements. We hypothesize that it can be explained by a newly described regime of cratering, "spall cratering", which controls the majority of impact craters on the surface of small asteroids like Datura.

  12. Simplification of multiple Fourier series - An example of algorithmic approach

    NASA Technical Reports Server (NTRS)

    Ng, E. W.

    1981-01-01

    This paper describes one example of multiple Fourier series which originate from a problem of spectral analysis of time series data. The example is exercised here with an algorithmic approach which can be generalized for other series manipulation on a computer. The generalized approach is presently pursued towards applications to a variety of multiple series and towards a general purpose algorithm for computer algebra implementation.

  13. Eliciting Mathematics Interest: New Directions for Context Personalization and Example Choice

    ERIC Educational Resources Information Center

    Høgheim, Sigve; Reber, Rolf

    2017-01-01

    Building on common assumptions in theories of interest and mathematics education, this experimental study examined the effect of context personalization based on individual preferences, group personalization, and example choice with preselected popular examples on middle school students' situational interest and performance in mathematics.…

  14. Examples of Sports-Based Youth Development Programs

    ERIC Educational Resources Information Center

    Berlin, Richard A.; Dworkin, Aaron; Eames, Ned; Menconi, Arn; Perkins, Daniel F.

    2007-01-01

    The authors provide examples of sports-based youth development programs and offer information about program mission and vision, program design and content, evaluation results, and program sustainability. The four sports-based youth development programs presented are Harlem RBI, Tenacity, Snowsports Outreach Society, and Hoops & Leaders…

  15. Faded-example as a Tool to Acquire and Automate Mathematics Knowledge

    NASA Astrophysics Data System (ADS)

    Retnowati, E.

    2017-04-01

    Students themselves accomplish Knowledge acquisition and automation. The teacher plays a role as the facilitator by creating mathematics tasks that assist students in building knowledge efficiently and effectively. Cognitive load caused by learning material presented by teachers should be considered as a critical factor. While the intrinsic cognitive load is related to the degree of complexity of the material learning ones can handle, the extraneous cognitive load is directly caused by how the material is presented. Strategies to present a learning material in computational learning domains like mathematics are a namely worked example (fully-guided task) or problem-solving (discovery task with no guidance). According to the empirical evidence, learning based on problem-solving may cause high-extraneous cognitive load for students who have limited prior knowledge, conversely learn based on worked example may cause high-extraneous cognitive load for students who have mastered the knowledge base. An alternative is a faded example consisting of the partly-completed task. Learning from faded-example can facilitate students who already acquire some knowledge about the to-be-learned material but still need more practice to automate the knowledge further. This instructional strategy provides a smooth transition from a fully-guided into an independent problem solver. Designs of faded examples for learning trigonometry are discussed.

  16. Ozone Pollution, Transport and Variability: Examples from Satellite and In-Situ Observations

    NASA Technical Reports Server (NTRS)

    Thompson, Anne

    2003-01-01

    Regional and intercontinental transport of ozone has been observed from satellite, aircraft and sounding data. Over the past several years, we have developed new tropospheric ozone retrieval techniques from the TOMS (Total Ozone Mapping Spectrometer) satellite instrument that are of sufficient resolution to follow pollution episodes. The modified-residual technique uses Level 2 total ozone and was used to follow the 1997 fires in the wake of the El-Nino-related fires in southeast Asia and the Indonesian maritime continent. The TOMS-direct method ('TDOT' = TOMS Direct Ozone in the Troposphere) is a newer algorithm that uses TOMS radiances directly to extract tropospheric ozone. Ozonesonde data that have been taken in campaigns (e.g. TRACE-P) and more consistently in the SHADOZ (Southern Hemisphere Additional Ozonesondes) project, reveal layers of pollution traceable with trajectories. Examples will be shown of long-range transport and recirculation over Africa during SAFARI-2000.

  17. On the Difference Between Additive and Subtractive QM/MM Calculations

    PubMed Central

    Cao, Lili; Ryde, Ulf

    2018-01-01

    The combined quantum mechanical (QM) and molecular mechanical (MM) approach (QM/MM) is a popular method to study reactions in biochemical macromolecules. Even if the general procedure of using QM for a small, but interesting part of the system and MM for the rest is common to all approaches, the details of the implementations vary extensively, especially the treatment of the interface between the two systems. For example, QM/MM can use either additive or subtractive schemes, of which the former is often said to be preferable, although the two schemes are often mixed up with mechanical and electrostatic embedding. In this article, we clarify the similarities and differences of the two approaches. We show that inherently, the two approaches should be identical and in practice require the same sets of parameters. However, the subtractive scheme provides an opportunity to correct errors introduced by the truncation of the QM system, i.e., the link atoms, but such corrections require additional MM parameters for the QM system. We describe and test three types of link-atom correction, viz. for van der Waals, electrostatic, and bonded interactions. The calculations show that electrostatic and bonded link-atom corrections often give rise to problems in the geometries and energies. The van der Waals link-atom corrections are quite small and give results similar to a pure additive QM/MM scheme. Therefore, both approaches can be recommended. PMID:29666794

  18. On the difference between additive and subtractive QM/MM calculations

    NASA Astrophysics Data System (ADS)

    Cao, Lili; Ryde, Ulf

    2018-04-01

    The combined quantum mechanical (QM) and molecular mechanical (MM) approach (QM/MM) is a popular method to study reactions in biochemical macromolecules. Even if the general procedure of using QM for a small, but interesting part of the system and MM for the rest is common to all approaches, the details of the implementations vary extensively, especially the treatment of the interface between the two systems. For example, QM/MM can use either additive or subtractive schemes, of which the former is often said to be preferable, although the two schemes are often mixed up with mechanical and electrostatic embedding. In this article, we clarify the similarities and differences of the two approaches. We show that inherently, the two approaches should be identical and in practice require the same sets of parameters. However, the subtractive scheme provides an opportunity to correct errors introduced by the truncation of the QM system, i.e. the link atoms, but such corrections require additional MM parameters for the QM system. We describe and test three types of link-atom correction, viz. for van der Waals, electrostatic and bonded interactions. The calculations show that electrostatic and bonded link-atom corrections often give rise to problems in the geometries and energies. The van der Waals link-atom corrections are quite small and give results similar to a pure additive QM/MM scheme. Therefore, both approaches can be recommended.

  19. Confronting Space Debris: Strategies and Warnings from Comparable Examples Including Deepwater Horizon

    DTIC Science & Technology

    2010-01-01

    Horizon (DH) was an ultra deepwater , semisubmers- ible offshore drilling rig contracted to BP by its owner, Transocean. The rig was capable of...Warnings from Comparable Examples Including Deepwater Horizon 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...research quality and objectivity. StrategieS and WarningS from Comparable exampleS inCluding deepWater Horizon Confronting SpaCe DebriS dave baiocchi

  20. Simulations with Elaborated Worked Example Modeling: Beneficial Effects on Schema Acquisition

    ERIC Educational Resources Information Center

    Meier, Debra K.; Reinhard, Karl J.; Carter, David O.; Brooks, David W.

    2008-01-01

    Worked examples have been effective in enhancing learning outcomes, especially with novice learners. Most of this research has been conducted in laboratory settings. This study examined the impact of embedding elaborated worked example modeling in a computer simulation practice activity on learning achievement among 39 undergraduate students…

  1. The Advantage of Mixing Examples in Inductive Learning: A Comparison of Three Hypotheses

    ERIC Educational Resources Information Center

    Guzman-Munoz, Francisco Javier

    2017-01-01

    Mixing examples of different categories (interleaving) has been shown to promote inductive learning as compared with presenting examples of the same category together (massing). In three studies, we tested whether the advantage of interleaving is exclusively due to the mixing of examples from different categories or to the temporal gap introduced…

  2. Scaffolding Meta-Cognitive Skills for Effective Analogical Problem Solving via Tailored Example Selection

    ERIC Educational Resources Information Center

    Muldner, Kasia; Conati, Cristina

    2010-01-01

    Although worked-out examples play a key role in cognitive skill acquisition, research demonstrates that students have various levels of meta-cognitive abilities for using examples effectively. The Example Analogy (EA)-Coach is an Intelligent Tutoring System that provides adaptive support to foster meta-cognitive behaviors relevant to a specific…

  3. Effect of Worked Examples and Cognitive Tutor Training on Constructing Equations

    ERIC Educational Resources Information Center

    Reed, Stephen K.; Corbett, Albert; Hoffman, Bob; Wagner, Angela; MacLaren, Ben

    2013-01-01

    Algebra students studied either static-table, static-graphics, or interactive-graphics instructional worked examples that alternated with Algebra Cognitive Tutor practice problems. A control group did not study worked examples but solved both the instructional and practice problems on the Cognitive Tutor (CT). Students in the control group…

  4. 42 CFR 409.33 - Examples of skilled nursing and rehabilitation services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 2 2012-10-01 2012-10-01 false Examples of skilled nursing and rehabilitation... Posthospital SNF Care § 409.33 Examples of skilled nursing and rehabilitation services. (a) Services that could qualify as either skilled nursing or skilled rehabilitation services—(1) Overall management and evaluation...

  5. 42 CFR 409.33 - Examples of skilled nursing and rehabilitation services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 2 2014-10-01 2014-10-01 false Examples of skilled nursing and rehabilitation... Posthospital SNF Care § 409.33 Examples of skilled nursing and rehabilitation services. (a) Services that could qualify as either skilled nursing or skilled rehabilitation services—(1) Overall management and evaluation...

  6. 42 CFR 409.33 - Examples of skilled nursing and rehabilitation services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 2 2013-10-01 2013-10-01 false Examples of skilled nursing and rehabilitation... Posthospital SNF Care § 409.33 Examples of skilled nursing and rehabilitation services. (a) Services that could qualify as either skilled nursing or skilled rehabilitation services—(1) Overall management and evaluation...

  7. An Example-Based Multi-Atlas Approach to Automatic Labeling of White Matter Tracts

    PubMed Central

    Yoo, Sang Wook; Guevara, Pamela; Jeong, Yong; Yoo, Kwangsun; Shin, Joseph S.; Mangin, Jean-Francois; Seong, Joon-Kyung

    2015-01-01

    We present an example-based multi-atlas approach for classifying white matter (WM) tracts into anatomic bundles. Our approach exploits expert-provided example data to automatically classify the WM tracts of a subject. Multiple atlases are constructed to model the example data from multiple subjects in order to reflect the individual variability of bundle shapes and trajectories over subjects. For each example subject, an atlas is maintained to allow the example data of a subject to be added or deleted flexibly. A voting scheme is proposed to facilitate the multi-atlas exploitation of example data. For conceptual simplicity, we adopt the same metrics in both example data construction and WM tract labeling. Due to the huge number of WM tracts in a subject, it is time-consuming to label each WM tract individually. Thus, the WM tracts are grouped according to their shape similarity, and WM tracts within each group are labeled simultaneously. To further enhance the computational efficiency, we implemented our approach on the graphics processing unit (GPU). Through nested cross-validation we demonstrated that our approach yielded high classification performance. The average sensitivities for bundles in the left and right hemispheres were 89.5% and 91.0%, respectively, and their average false discovery rates were 14.9% and 14.2%, respectively. PMID:26225419

  8. An Example-Based Multi-Atlas Approach to Automatic Labeling of White Matter Tracts.

    PubMed

    Yoo, Sang Wook; Guevara, Pamela; Jeong, Yong; Yoo, Kwangsun; Shin, Joseph S; Mangin, Jean-Francois; Seong, Joon-Kyung

    2015-01-01

    We present an example-based multi-atlas approach for classifying white matter (WM) tracts into anatomic bundles. Our approach exploits expert-provided example data to automatically classify the WM tracts of a subject. Multiple atlases are constructed to model the example data from multiple subjects in order to reflect the individual variability of bundle shapes and trajectories over subjects. For each example subject, an atlas is maintained to allow the example data of a subject to be added or deleted flexibly. A voting scheme is proposed to facilitate the multi-atlas exploitation of example data. For conceptual simplicity, we adopt the same metrics in both example data construction and WM tract labeling. Due to the huge number of WM tracts in a subject, it is time-consuming to label each WM tract individually. Thus, the WM tracts are grouped according to their shape similarity, and WM tracts within each group are labeled simultaneously. To further enhance the computational efficiency, we implemented our approach on the graphics processing unit (GPU). Through nested cross-validation we demonstrated that our approach yielded high classification performance. The average sensitivities for bundles in the left and right hemispheres were 89.5% and 91.0%, respectively, and their average false discovery rates were 14.9% and 14.2%, respectively.

  9. ATK Launch Systems Engineering NASA Programs Engineering Examples

    NASA Technical Reports Server (NTRS)

    Richardson, David

    2007-01-01

    This presentation provides an overview of the work done at ATK Launch Systems with and indication of how engineering knowledge can be applied to several real world problems. All material in the presentation has been screened to meet ITAR restrictions. The information provided is a compilation of general engineering knowledge and material available in the public domain. The presentation provides an overview of ATK Launch Systems and NASA programs. Some discussion is provided about the types of engineering conducted at the Promontory plant with added detail about RSRM nozzle engineering. Some brief examples of examples of nozzle technical issues with regard to adhesives and phenolics are shared. These technical issue discussions are based on material available in the public domain.

  10. Opportunities and Examples for Integration of Socio-environmental Approaches to Support Climate-informed Decisions

    NASA Astrophysics Data System (ADS)

    Kenney, M. A.

    2014-12-01

    Climate and environmental decisions require science that couples human and natural systems to quantify or articulate the observed physical, natural, and societal changes or likely consequences of different decision options. Despite the need for such policy-relevant research, multidisciplinary collaborations can be wrought with challenges of data integration, model interoperability, and communication across disciplinary divides. In this talk, I will present several examples where I have collaborated with colleagues from the physical, natural, and social sciences to develop novel, actionable science to inform decision-making. Specifically, I will discuss a cost analysis of water and sediment diversions to optimize land building in the Mississippi River delta (winner of American Geophysical Union Water Resources Research Editor's Choice Award 2014) and the development of a National Climate Indicator System that uses knowledge across the physical, natural, and social sciences to establish an end-to-end indicator system of climate changes, impacts, vulnerabilities, and responses. The latter project is in the process of moving from research to operations, an additional challenge and opportunity, as we work with the U.S. Global Change Research Program and their affiliated Federal agencies to establish it beyond the research prototype. Using these examples, I will provide some lessons learned that would have general applicability to socio-environmental research collaborations and integration of data, models, and information systems to support climate and environmental decision-making.

  11. Magnetic Force and Work: An Accessible Example

    ERIC Educational Resources Information Center

    Gates, Joshua

    2014-01-01

    Despite their physics instructors' arguments to the contrary, introductory students can observe situations in which there seems to be compelling evidence for magnetic force doing work. The counterarguments are often highly technical and require physics knowledge beyond the experience of novice students, however. A simple example is presented…

  12. Example-Based Learning in Heuristic Domains: A Cognitive Load Theory Account

    ERIC Educational Resources Information Center

    Renkl, Alexander; Hilbert, Tatjana; Schworm, Silke

    2009-01-01

    One classical instructional effect of cognitive load theory (CLT) is the worked-example effect. Although the vast majority of studies have focused on well-structured and algorithmic sub-domains of mathematics or physics, more recent studies have also analyzed learning with examples from complex domains in which only heuristic solution strategies…

  13. Example-Based Learning: Exploring the Use of Matrices and Problem Variability

    ERIC Educational Resources Information Center

    Hancock-Niemic, Mary A.; Lin, Lijia; Atkinson, Robert K.; Renkl, Alexander; Wittwer, Joerg

    2016-01-01

    The purpose of the study was to investigate the efficacy of using faded worked examples presented in matrices with problem structure variability to enhance learners' ability to recognize the underlying structure of the problems. Specifically, this study compared the effects of matrix-format versus linear-format faded worked examples combined with…

  14. 7 CFR Exhibit C to Subpart B of... - Cooperative Agreement (Example)

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Cooperative Agreement (Example) C Exhibit C to Subpart B of Part 1955 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING... Exhibit C to Subpart B of Part 1955—Cooperative Agreement (Example) Editorial Note: Exhibit C is not...

  15. Qualitative case study data analysis: an example from practice.

    PubMed

    Houghton, Catherine; Murphy, Kathy; Shaw, David; Casey, Dympna

    2015-05-01

    To illustrate an approach to data analysis in qualitative case study methodology. There is often little detail in case study research about how data were analysed. However, it is important that comprehensive analysis procedures are used because there are often large sets of data from multiple sources of evidence. Furthermore, the ability to describe in detail how the analysis was conducted ensures rigour in reporting qualitative research. The research example used is a multiple case study that explored the role of the clinical skills laboratory in preparing students for the real world of practice. Data analysis was conducted using a framework guided by the four stages of analysis outlined by Morse ( 1994 ): comprehending, synthesising, theorising and recontextualising. The specific strategies for analysis in these stages centred on the work of Miles and Huberman ( 1994 ), which has been successfully used in case study research. The data were managed using NVivo software. Literature examining qualitative data analysis was reviewed and strategies illustrated by the case study example provided. Discussion Each stage of the analysis framework is described with illustration from the research example for the purpose of highlighting the benefits of a systematic approach to handling large data sets from multiple sources. By providing an example of how each stage of the analysis was conducted, it is hoped that researchers will be able to consider the benefits of such an approach to their own case study analysis. This paper illustrates specific strategies that can be employed when conducting data analysis in case study research and other qualitative research designs.

  16. [Transference in the treatment of dissociative identity disorder: A review of literature and a case example].

    PubMed

    Lambert, Ann Marie; Gagnon, Lise; Fontaine, Francine S

    2014-01-01

    A literature review about transference in the treatment of dissociative identity disorder (DID) is presented. Common transference reactions resulting from serious traumas are explored, considering that those kind of trauma are higly present in the pathways of DID patients. Post traumatic transference aspects specific to DID are also presented. In addition, common transference patterns and dissociative aspects of transference in the treatment of DID are explained. Transference is also discussed in relationship to the possible impact of disorganized attachment, which is a main component in the development of DID. The clinical implications of this proposition will be discussed and supported by a case example.

  17. Implementing ethics in the professions: examples from environmental epidemiology.

    PubMed

    Soskolne, Colin L; Sieswerda, Lee E

    2003-04-01

    The need to integrate ethics into professional life, from the grassroots up, has been recognized, and a comprehensive ethics program has been proposed as a model. The model includes the four dimensions of: consensus building, ethics guidelines development and review, education, and implementation. The activities of the International Society for Environmental Epidemiology (ISEE) are presented as examples and compared with the proposed model. Several innovative activities are described and incentives for ethical professional conduct are highlighted. The examples are provided for emulation by other professional organizations in the hope that, thereby, greater protection of the public interest will be achieved.

  18. Catalytic diastereo- and enantioselective additions of versatile allyl groups to N-H ketimines

    NASA Astrophysics Data System (ADS)

    Jang, Hwanjong; Romiti, Filippo; Torker, Sebastian; Hoveyda, Amir H.

    2017-12-01

    There are many biologically active organic molecules that contain one or more nitrogen-containing moieties, and broadly applicable and efficient catalytic transformations that deliver them diastereoselectively and/or enantioselectively are much sought after. Various methods for enantioselective synthesis of α-secondary amines are available (for example, from additions to protected/activated aldimines), but those involving ketimines are much less common. There are no reported additions of carbon-based nucleophiles to unprotected/unactivated (or N-H) ketimines. Here, we report a catalytic, diastereo- and enantioselective three-component strategy for merging an N-H ketimine, a monosubstituted allene and B2(pin)2, affording products in up to 95% yield, >98% diastereoselectivity and >99:1 enantiomeric ratio. The utility of the approach is highlighted by synthesis of the tricyclic core of a class of compounds that have been shown to possess anti-Alzheimer activity. Stereochemical models developed with the aid of density functional theory calculations, which account for the observed trends and levels of enantioselectivity, are presented.

  19. Additive effects in high-voltage layered-oxide cells: A statistics of mixtures approach

    DOE PAGES

    Sahore, Ritu; Peebles, Cameron; Abraham, Daniel P.; ...

    2017-07-20

    Li 1.03(Ni 0.5Mn 0.3Co 0.2) 0.97O 2 (NMC)-based coin cells containing the electrolyte additives vinylene carbonate (VC) and tris(trimethylsilyl)phosphite (TMSPi) in the range of 0-2 wt% were cycled between 3.0 and 4.4 V. The changes in capacity at rates of C/10 and C/1 and resistance at 60% state of charge were found to follow linear-with-time kinetic rate laws. Further, the C/10 capacity and resistance data were amenable to modeling by a statistics of mixtures approach. Applying physical meaning to the terms in the empirical models indicated that the interactions between the electrolyte and additives were not simple. For example, theremore » were strong, synergistic interactions between VC and TMSPi affecting C/10 capacity loss, as expected, but there were other, more subtle interactions between the electrolyte components. In conclusion, the interactions between these components controlled the C/10 capacity decline and resistance increase.« less

  20. 7 CFR Exhibit C to Subpart B of... - Cooperative Agreement (Example)

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 14 2012-01-01 2012-01-01 false Cooperative Agreement (Example) C Exhibit C to... Pt. 1955, Subpt. B, Note Exhibit C to Subpart B of Part 1955—Cooperative Agreement (Example) Editorial Note: Exhibit C is not published in the Code of Federal Regulations. It is available in any FmHA...

  1. 7 CFR Exhibit C to Subpart B of... - Cooperative Agreement (Example)

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 14 2011-01-01 2011-01-01 false Cooperative Agreement (Example) C Exhibit C to... Pt. 1955, Subpt. B, Note Exhibit C to Subpart B of Part 1955—Cooperative Agreement (Example) Editorial Note: Exhibit C is not published in the Code of Federal Regulations. It is available in any FmHA...

  2. 7 CFR Exhibit C to Subpart B of... - Cooperative Agreement (Example)

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 14 2014-01-01 2014-01-01 false Cooperative Agreement (Example) C Exhibit C to... Pt. 1955, Subpt. B, Note Exhibit C to Subpart B of Part 1955—Cooperative Agreement (Example) Editorial Note: Exhibit C is not published in the Code of Federal Regulations. It is available in any FmHA...

  3. 14 CFR Appendix - Example of SIFL Adjustment

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Example of SIFL Adjustment Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS STATEMENTS OF GENERAL POLICY Policies Relating to Rates and Tariffs Treatment of deferred Federal income taxes for rate purposes. Pt. 399, Subpt. C,...

  4. 14 CFR Appendix - Example of SIFL Adjustment

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Example of SIFL Adjustment Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS STATEMENTS OF GENERAL POLICY Policies Relating to Rates and Tariffs Treatment of deferred Federal income taxes for rate purposes. Pt. 399, Subpt. C,...

  5. 14 CFR Appendix - Example of SIFL Adjustment

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Example of SIFL Adjustment Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS STATEMENTS OF GENERAL POLICY Policies Relating to Rates and Tariffs Treatment of deferred Federal income taxes for rate purposes. Pt. 399, Subpt. C,...

  6. Coumarin Compounds in Medicinal Chemistry: Some Important Examples from the Last Years.

    PubMed

    Pereira, Thiago Moreira; Franco, Daiana Portella; Vitorio, Felipe; Kummerle, Arthur Eugen

    2018-01-01

    Coumarins are natural products characterized as 1,2 benzopyrones widely distributed in plants, as well as, in many species of fungi and bacteria. Nowadays, many synthetic procedures allow the discovery of coumarins with expanded chemical space. The ability to exert noncovalent interactions with many enzymes and receptors in live organisms lead the coumarins to exhibit a wide range of biological activities and applications. Then, this manuscript provides an overview of the use of coumarins compounds in medicinal chemistry in treating many diseases. Important examples of the last years have been selected concerning the activities of coumarins as anticoagulant, anticancer, antioxidant, antiviral, anti-diabetics, anti-inflammatory, antibacterial, antifungal and anti-neurodegerative agents. Additionally, it also includes applications of coumarins as fluorescent sensors for biological systems. Thus, this work aims to contribute to the development of new rational research projects for the treatment and diagnosis of pathologies using coumarin derivatives. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  7. Selection of examples in case-based computer-aided decision systems

    PubMed Central

    Mazurowski, Maciej A.; Zurada, Jacek M.; Tourassi, Georgia D.

    2013-01-01

    Case-based computer-aided decision (CB-CAD) systems rely on a database of previously stored, known examples when classifying new, incoming queries. Such systems can be particularly useful since they do not need retraining every time a new example is deposited in the case base. The adaptive nature of case-based systems is well suited to the current trend of continuously expanding digital databases in the medical domain. To maintain efficiency, however, such systems need sophisticated strategies to effectively manage the available evidence database. In this paper, we discuss the general problem of building an evidence database by selecting the most useful examples to store while satisfying existing storage requirements. We evaluate three intelligent techniques for this purpose: genetic algorithm-based selection, greedy selection and random mutation hill climbing. These techniques are compared to a random selection strategy used as the baseline. The study is performed with a previously presented CB-CAD system applied for false positive reduction in screening mammograms. The experimental evaluation shows that when the development goal is to maximize the system’s diagnostic performance, the intelligent techniques are able to reduce the size of the evidence database to 37% of the original database by eliminating superfluous and/or detrimental examples while at the same time significantly improving the CAD system’s performance. Furthermore, if the case-base size is a main concern, the total number of examples stored in the system can be reduced to only 2–4% of the original database without a decrease in the diagnostic performance. Comparison of the techniques shows that random mutation hill climbing provides the best balance between the diagnostic performance and computational efficiency when building the evidence database of the CB-CAD system. PMID:18854606

  8. From an animal model to human patients: An example of a translational study on obsessive compulsive disorder (OCD).

    PubMed

    Eilam, David

    2017-05-01

    The application of similar analyses enables a direct projection from translational research in animals to human studies. Following is an example of how the methodology of a specific animal model of obsessive-compulsive disorder (OCD) was applied to study human patients. Specifically, the quinpirole rat model for OCD was based on analyzing the trajectories of travel among different locales, and scoring the set of acts performed at each locale. Applying this analytic approach in human patients unveiled various aspects of OCD, such as the repetition and addition of acts, incompleteness, and the link between behavior and specific locations. It is also illustrated how the same analytical approach could be applicable to studying other mental disorders. Finally, it is suggested that the development of OCD could be explained by the four-phase sequence of Repetition, Addition, Condensation, and Elimination, as outlined in the study of ontogeny and phylogeny and applied to normal development of behavior. In OCD, this sequence is curtailed, resulting in the abundant repetition and addition of acts. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Synthesis of nanometer-sized sodalite without adding organic additives.

    PubMed

    Fan, Wei; Morozumi, Kazumasa; Kimura, Riichiro; Yokoi, Toshiyuki; Okubo, Tatsuya

    2008-06-01

    Aggregates (80 nm) of sodalite nanocrystals with crystallite sizes ranging from 20 to 40 nm have been synthesized from a sodium aluminosilicate solution at low temperature, without adding any organic additives, while paying attention to the key factors for the synthesis of nanosized zeolite crystals. The physical properties of nanosized sodalite crystals were characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, 29Si solid-state magic-angle spinning (MAS) NMR, and N2 adsorption. As expected, the external surface area of nanosized sodalite crystals is significantly increased compared with that of microsized sodalite crystals. The size of synthesized sodalite crystals can be controlled from 20 nm to 10 microm. It is found that the preparation of a homogeneous aluminosilicate solution followed by the formation of an aluminosilicate hard gel by adjusting the initial composition, for example, SiO2/Al2O3 and Na2O/H2O ratios, is critical for synthesis.

  10. Oxidative Addition and Reductive Elimination at Main-Group Element Centers.

    PubMed

    Chu, Terry; Nikonov, Georgii I

    2018-04-11

    Oxidative addition and reductive elimination are key steps in a wide variety of catalytic reactions mediated by transition-metal complexes. Historically, this reactivity has been considered to be the exclusive domain of d-block elements. However, this paradigm has changed in recent years with the demonstration of transition-metal-like reactivity by main-group compounds. This Review highlights the substantial progress achieved in the past decade for the activation of robust single bonds by main-group compounds and the more recently realized activation of multiple bonds by these elements. We also discuss the significant discovery of reversible activation of single bonds and distinct examples of reductive elimination at main-group element centers. The review consists of three major parts, starting with oxidative addition of single bonds, proceeding to cleavage of multiple bonds, and culminated by the discussion of reversible bond activation and reductive elimination. Within each subsection, the discussion is arranged according to the type of bond being cleaved or formed and considers elements from the left to the right of each period and down each group of the periodic table. The majority of results discussed in this Review come from the past decade; however, earlier reports are also included to ensure completeness.

  11. Nontargeted Screening Method for Illegal Additives Based on Ultrahigh-Performance Liquid Chromatography-High-Resolution Mass Spectrometry.

    PubMed

    Fu, Yanqing; Zhou, Zhihui; Kong, Hongwei; Lu, Xin; Zhao, Xinjie; Chen, Yihui; Chen, Jia; Wu, Zeming; Xu, Zhiliang; Zhao, Chunxia; Xu, Guowang

    2016-09-06

    Identification of illegal additives in complex matrixes is important in the food safety field. In this study a nontargeted screening strategy was developed to find illegal additives based on ultrahigh-performance liquid chromatography-high-resolution mass spectrometry (UHPLC-HRMS). First, an analytical method for possible illegal additives in complex matrixes was established including fast sample pretreatment, accurate UHPLC separation, and HRMS detection. Second, efficient data processing and differential analysis workflow were suggested and applied to find potential risk compounds. Third, structure elucidation of risk compounds was performed by (1) searching online databases [Metlin and the Human Metabolome Database (HMDB)] and an in-house database which was established at the above-defined conditions of UHPLC-HRMS analysis and contains information on retention time, mass spectra (MS), and tandem mass spectra (MS/MS) of 475 illegal additives, (2) analyzing fragment ions, and (3) referring to fragmentation rules. Fish was taken as an example to show the usefulness of the nontargeted screening strategy, and six additives were found in suspected fish samples. Quantitative analysis was further carried out to determine the contents of these compounds. The satisfactory application of this strategy in fish samples means that it can also be used in the screening of illegal additives in other kinds of food samples.

  12. Development of Benchmark Examples for Static Delamination Propagation and Fatigue Growth Predictions

    NASA Technical Reports Server (NTRS)

    Kruger, Ronald

    2011-01-01

    The development of benchmark examples for static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of an End-Notched Flexure (ENF) specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, static benchmark examples were created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during stable delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall, the results are encouraging but further assessment for mixed-mode delamination is required.

  13. Additive Manufacturing of Multifunctional Components Using High Density Carbon Nanotube Yarn Filaments

    NASA Technical Reports Server (NTRS)

    Gardner, John M.; Sauti, Godfrey; Kim, Jae-Woo; Cano, Roberto J.; Wincheski, Russell A.; Stelter, Christopher J.; Grimsley, Brian W.; Working, Dennis C.; Siochi, Emilie J.

    2016-01-01

    Additive manufacturing allows for design freedom and part complexity not currently attainable using traditional manufacturing technologies. Fused Filament Fabrication (FFF), for example, can yield novel component geometries and functionalities because the method provides a high level of control over material placement and processing conditions. This is achievable by extrusion of a preprocessed filament feedstock material along a predetermined path. However if fabrication of a multifunctional part relies only on conventional filament materials, it will require a different material for each unique functionality printed into the part. Carbon nanotubes (CNTs) are an attractive material for many applications due to their high specific strength as well as good electrical and thermal conductivity. The presence of this set of properties in a single material presents an opportunity to use one material to achieve multifunctionality in an additively manufactured part. This paper describes a recently developed method for processing continuous CNT yarn filaments into three-dimensional articles, and summarizes the mechanical, electrical, and sensing performance of the components fabricated in this way.

  14. CeRuPO: A rare example of a ferromagnetic Kondo lattice

    NASA Astrophysics Data System (ADS)

    Krellner, C.; Kini, N. S.; Brüning, E. M.; Koch, K.; Rosner, H.; Nicklas, M.; Baenitz, M.; Geibel, C.

    2007-09-01

    We have determined the physical ground state properties of the compounds CeRuPO and CeOsPO by means of magnetic susceptibility χ(T) , specific heat C(T) , electrical resistivity ρ(T) , and thermopower S(T) measurements. χ(T) reveals a trivalent 4f1 cerium state in both compounds. For CeRuPO a pronounced decrease of ρ(T) below 50K indicates the onset of coherent Kondo scattering, which is confirmed by enhanced S(T) . The temperature and magnetic field dependence of χ(T) and C(T) evidence ferromagnetic (FM) order at TC=15K . Thus, CeRuPO seems to be one of the rare examples of a FM Kondo lattice. In contrast, CeOsPO shows antiferromagnetic order at TN=4.5K despite only minor changes in lattice parameters and electronic configuration. Additional P31 NMR results support these scenarios. LSDA+U calculations evidence a quasi-two-dimensional electronic band structure, reflecting a strong covalent bonding within the CeO and RuP layers and a weak ioniclike bonding between the layers.

  15. Hybrid Residual Flexibility/Mass-Additive Method for Structural Dynamic Testing

    NASA Technical Reports Server (NTRS)

    Tinker, M. L.

    2003-01-01

    A large fixture was designed and constructed for modal vibration testing of International Space Station elements. This fixed-base test fixture, which weighs thousands of pounds and is anchored to a massive concrete floor, initially utilized spherical bearings and pendulum mechanisms to simulate Shuttle orbiter boundary constraints for launch of the hardware. Many difficulties were encountered during a checkout test of the common module prototype structure, mainly due to undesirable friction and excessive clearances in the test-article-to-fixture interface bearings. Measured mode shapes and frequencies were not representative of orbiter-constrained modes due to the friction and clearance effects in the bearings. As a result, a major redesign effort for the interface mechanisms was undertaken. The total cost of the fixture design, construction and checkout, and redesign was over $2 million. Because of the problems experienced with fixed-base testing, alternative free-suspension methods were studied, including the residual flexibility and mass-additive approaches. Free-suspension structural dynamics test methods utilize soft elastic bungee cords and overhead frame suspension systems that are less complex and much less expensive than fixed-base systems. The cost of free-suspension fixturing is on the order of tens of thousands of dollars as opposed to millions, for large fixed-base fixturing. In addition, free-suspension test configurations are portable, allowing modal tests to be done at sites without modal test facilities. For example, a mass-additive modal test of the ASTRO-1 Shuttle payload was done at the Kennedy Space Center launch site. In this Technical Memorandum, the mass-additive and residual flexibility test methods are described in detail. A discussion of a hybrid approach that combines the best characteristics of each method follows and is the focus of the study.

  16. Additive manufacturing.

    PubMed

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  17. Combining Qualitative and Quantitative Data: An Example.

    ERIC Educational Resources Information Center

    Sikka, Anjoo; And Others

    Methodology from an ongoing research study to validate teaching techniques for deaf and blind students provides an example of the ways that several types of quantitative and qualitative data can be combined in analysis. Four teacher and student pairs were selected. The students were between 14 and 21 years old, had both auditory and visual…

  18. Advances in Additive Manufacturing

    DTIC Science & Technology

    2016-07-14

    of 3D - printed structures. Analysis examples will include quantification of tolerance differences between the designed and manufactured parts, void...15. SUBJECT TERMS 3-D printing , validation and verification, nondestructive inspection, print -on-the-move, prototyping 16. SECURITY CLASSIFICATION...researching the formation of AM-grade metal powder from battlefield scrap and operating base waste, 2) potential of 3-D printing with sand to make

  19. Embitterment and bereavement: The Sewol ferry accident example.

    PubMed

    Chae, Jeong-Ho; Huh, Hyu Jung; Choi, Won Joon

    2018-01-01

    On Wednesday, April 16, 2014, 261 high school students on a field trip died in the sinking of the Sewol ferry. The bereaved family of the Sewol ferry accident experienced one of the most painful traumatic losses such as the sudden death of one's child through an accident. This article reviewed and discussed embitterment related to traumatic loss through the example of the Sewol ferry accident. Embitterment-related issues and problems in coping with the accident that is caused by societal factors were described. In addition, embitterment-related findings of several previous studies based on bereaved families' mental health cohort study were reviewed. Traumatic loss of the human-made ferry accident was accompanied with feelings of being cheated, injustice, incompetence, wrongdoing by a perpetrator, and the destruction of one's belief and value system, causing severe embitterment. Embitterment was related to other mental health problems including depression, anxiety, and complicated grief. Social support and positive individual resource including optimism and wisdom can be helpful for recovery from posttraumatic embitterment. The goal of grief is to remember the decedent, understand the changes created by the loss, and determine how to reinvest in life. Embitterment may disturb the process of grief. Without the management of the embitterment, true grief may not be possible. The breakdown of value systems and severe embitterment should get more attention in future research. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. 78 FR 70354 - Conceptual Example of a Proposed Risk Management Regulatory Framework Policy Statement

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-25

    ... NUCLEAR REGULATORY COMMISSION [NRC-2013-0254] Conceptual Example of a Proposed Risk Management... issuing a document entitled: ``White Paper on a Conceptual Example of a Proposed Risk Management... ``openness,'' a white paper on a Conceptual Example of a Proposed Risk Management Regulatory Framework (RMRF...

  1. Unlikely Fluctuations and Non-Equilibrium Work Theorems-A Simple Example.

    PubMed

    Muzikar, Paul

    2016-06-30

    An exciting development in statistical mechanics has been the elucidation of a series of surprising equalities involving the work done during a nonequilibrium process. Astumian has presented an elegant example of such an equality, involving a colloidal particle undergoing Brownian motion in the presence of gravity. We analyze this example; its simplicity, and its link to geometric Brownian motion, allows us to clarify the inner workings of the equality. Our analysis explicitly shows the important role played by large, unlikely fluctuations.

  2. Effects of Process-Oriented and Product-Oriented Worked Examples and Prior Knowledge on Learner Problem Solving and Attitude: A Study in the Domain of Microeconomics

    ERIC Educational Resources Information Center

    Brooks, Christopher Darren

    2009-01-01

    The purpose of this study was to investigate the effectiveness of process-oriented and product-oriented worked example strategies and the mediating effect of prior knowledge (high versus low) on problem solving and learner attitude in the domain of microeconomics. In addition, the effect of these variables on learning efficiency as well as the…

  3. An intelligent computer tutor to guide self-explanation while learning from examples

    NASA Astrophysics Data System (ADS)

    Conati, Cristina

    1999-11-01

    Many studies in cognitive science show that self-explanation---the process of clarifying and making more complete to oneself the solution of an example---improves learning, and that guiding self-explanation extends these benefits. This thesis presents an intelligent computer tutor that aims to improve learning from examples by supporting self-explanation. The tutor, known as the SE (self-explanation) Coach, is innovative in two ways. First, it represents the first attempt to develop a computer tutor that supports example studying instead of problem solving. Second, it explicitly guides a domain-general, meta-cognitive skill: self-explanation. The SE-Coach is part of the Andes tutoring system for college physics and is meant to be used in conjunction with the problem solving tasks that Andes supports. In order to maximize the system capability to trigger the same beneficial cognitive processes, every element of the SE-Coach embeds existing hypotheses about the features that make self-explanation effective for learning. Designing the SE-Coach involved finding solutions for three main challenges: (1) To design an interface that effectively monitors and supports self-explanation. (2) To devise a student model that allows the assessment of example understanding from reading and self-examination actions. (3) To effectively elicit further self-explanation that improves student's example understanding. In this work we present our solutions to these challenges: (1) An interface including principled, interactive tools to explore examples and build self-explanations under the SECoach's supervision. (2) A probabilistic student model based on a Bayesian network, which integrates a model of correct self-explanation and information on the student's knowledge and studying actions to generate a probabilistic assessment of the student's example understanding. (3) Tutorial interventions that rely on the student model to detect deficits in the student's example understanding and

  4. "Upbuilding Examples" for Adults Close to Children

    ERIC Educational Resources Information Center

    Wivestad, Stein M.

    2013-01-01

    Both in formal situations (as school teachers, football trainers, etc.) and in many, often unpredictable informal situations (both inside and outside institutions)--adults come close to children. Whether we intend it or not, we continually give them examples of what it is to live as a human being, and thereby we have a pedagogical responsibility.…

  5. Sparse Additive Ordinary Differential Equations for Dynamic Gene Regulatory Network Modeling.

    PubMed

    Wu, Hulin; Lu, Tao; Xue, Hongqi; Liang, Hua

    2014-04-02

    The gene regulation network (GRN) is a high-dimensional complex system, which can be represented by various mathematical or statistical models. The ordinary differential equation (ODE) model is one of the popular dynamic GRN models. High-dimensional linear ODE models have been proposed to identify GRNs, but with a limitation of the linear regulation effect assumption. In this article, we propose a sparse additive ODE (SA-ODE) model, coupled with ODE estimation methods and adaptive group LASSO techniques, to model dynamic GRNs that could flexibly deal with nonlinear regulation effects. The asymptotic properties of the proposed method are established and simulation studies are performed to validate the proposed approach. An application example for identifying the nonlinear dynamic GRN of T-cell activation is used to illustrate the usefulness of the proposed method.

  6. Examples of successful pollution prevention programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Natan, T.E. Jr.

    1995-09-01

    Motivation for implementing a pollution prevention program can come from many sources: federal, state, or local mandates; community involvement; cost analyses; or companies` own desires for superior environmental management. However, the decision to apply pollution prevention techniques is often part of a larger process of reducing environmental releases and transfers of toxic chemicals. When corporations are given the opportunity to choose pollution prevention as a part of total environmental management, the result can be an extremely successful program. The US Environmental Protection Agency`s (EPA`s) 33/50 program, begun in 1991, provides an example of a diverse population of companies in variousmore » industries creating pollution prevention opportunities in response to an invitation to reduce their environmental releases and transfers of 17 priority chemicals 33% by 1992 and 50% by 1995, using 1988 Toxic Release Inventory (TRI) data as a baseline. This chapter profiles three companies participating in the 33/50 Program that have provided details of interesting and successful pollution prevention programs resulting in varying degrees of reduction of environmental releases and transfers. The companies, Grumman Corporation of Bethpage, New York; Panel Processing of Alpena, Michigan; and Avondale Industries of New Orleans, Louisiana, were chosen for the range of industries represented: manufacture of transportation equipment, coating and lamination of wood products, and shipbuilding. Examples of other interesting pollution prevention plans will also be discussed.« less

  7. Harnessing and Guiding the Power of Policy: Examples from One State's Experiences

    ERIC Educational Resources Information Center

    Swanson, Julie Dingle; Lord, E. Wayne

    2013-01-01

    This article links research and practice through discussion of policy's conceptual aspects illustrated through real-world examples. Gifted education policy essentials, identification, curriculum and services, personnel preparation, and program management, assessment, and evaluation are described. Examples from studies of one state help the reader…

  8. Using qualitative comparative analysis (QCA) in systematic reviews of complex interventions: a worked example.

    PubMed

    Thomas, James; O'Mara-Eves, Alison; Brunton, Ginny

    2014-06-20

    Systematic reviews that address policy and practice questions in relation to complex interventions frequently need not only to assess the efficacy of a given intervention but to identify which intervention - and which intervention components - might be most effective in particular situations. Here, intervention replication is rare, and commonly used synthesis methods are less useful when the focus of analysis is the identification of those components of an intervention that are critical to its success. Having identified initial theories of change in a previous analysis, we explore the potential of qualitative comparative analysis (QCA) to assist with complex syntheses through a worked example. Developed originally in the area of political science and historical sociology, a QCA aims to identify those configurations of participant, intervention and contextual characteristics that may be associated with a given outcome. Analysing studies in these terms facilitates the identification of necessary and sufficient conditions for the outcome to be obtained. Since QCA is predicated on the assumption that multiple pathways might lead to the same outcome and does not assume a linear additive model in terms of changes to a particular condition (that is, it can cope with 'tipping points' in complex interventions), it appears not to suffer from some of the limitations of the statistical methods often used in meta-analysis. The worked example shows how the QCA reveals that our initial theories of change were unable to distinguish between 'effective' and 'highly effective' interventions. Through the iterative QCA process, other intervention characteristics are identified that better explain the observed results. QCA is a promising alternative (or adjunct), particularly to the standard fall-back of a 'narrative synthesis' when a quantitative synthesis is impossible, and should be considered when reviews are broad and heterogeneity is significant. There are very few examples of its

  9. Using qualitative comparative analysis (QCA) in systematic reviews of complex interventions: a worked example

    PubMed Central

    2014-01-01

    Background Systematic reviews that address policy and practice questions in relation to complex interventions frequently need not only to assess the efficacy of a given intervention but to identify which intervention - and which intervention components - might be most effective in particular situations. Here, intervention replication is rare, and commonly used synthesis methods are less useful when the focus of analysis is the identification of those components of an intervention that are critical to its success. Methods Having identified initial theories of change in a previous analysis, we explore the potential of qualitative comparative analysis (QCA) to assist with complex syntheses through a worked example. Developed originally in the area of political science and historical sociology, a QCA aims to identify those configurations of participant, intervention and contextual characteristics that may be associated with a given outcome. Analysing studies in these terms facilitates the identification of necessary and sufficient conditions for the outcome to be obtained. Since QCA is predicated on the assumption that multiple pathways might lead to the same outcome and does not assume a linear additive model in terms of changes to a particular condition (that is, it can cope with ‘tipping points’ in complex interventions), it appears not to suffer from some of the limitations of the statistical methods often used in meta-analysis. Results The worked example shows how the QCA reveals that our initial theories of change were unable to distinguish between ‘effective’ and ‘highly effective’ interventions. Through the iterative QCA process, other intervention characteristics are identified that better explain the observed results. Conclusions QCA is a promising alternative (or adjunct), particularly to the standard fall-back of a ‘narrative synthesis’ when a quantitative synthesis is impossible, and should be considered when reviews are broad and

  10. Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

    NASA Astrophysics Data System (ADS)

    Grzonka, Aleksandra

    2015-12-01

    Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.

  11. Generalized concentration addition: a method for examining mixtures containing partial agonists.

    PubMed

    Howard, Gregory J; Webster, Thomas F

    2009-08-07

    Environmentally relevant toxic exposures often consist of simultaneous exposure to multiple agents. Methods to predict the expected outcome of such combinations are critical both to risk assessment and to an accurate judgment of whether combinations are synergistic or antagonistic. Concentration addition (CA) has commonly been used to assess the presence of synergy or antagonism in combinations of similarly acting chemicals, and to predict effects of combinations of such agents. CA has the advantage of clear graphical interpretation: Curves of constant joint effect (isoboles) must be negatively sloped straight lines if the mixture is concentration additive. However, CA cannot be directly used to assess combinations that include partial agonists, although such agents are of considerable interest. Here, we propose a natural extension of CA to a functional form that may be applied to mixtures including full agonists and partial agonists. This extended definition, for which we suggest the term "generalized concentration addition," encompasses linear isoboles with slopes of any sign. We apply this approach to the simple example of agents with dose-response relationships described by Hill functions with slope parameter n=1. The resulting isoboles are in all cases linear, with negative, zero and positive slopes. Using simple mechanistic models of ligand-receptor systems, we show that the same isobole pattern and joint effects are generated by modeled combinations of full and partial agonists. Special cases include combinations of two full agonists and a full agonist plus a competitive antagonist.

  12. Teaching Exponential Growth and Decay: Examples from Medicine

    ERIC Educational Resources Information Center

    Hobbie, Russell K.

    1973-01-01

    A treatment of exponential growth and decay is sketched which does not require knowledge of calculus, and hence, it can be applied to many cases in the biological and medical sciences. Some examples are bacterial growth, sterilization, clearance, and drug absorption. (DF)

  13. Surface modification of additive manufactured metal products by an intense electron beam

    NASA Astrophysics Data System (ADS)

    Teresov, A. D.; Koval, N. N.; Ivanov, Yu F.; Petrikova, E. A.; Krysina, O. V.

    2017-11-01

    On the example of VT6 titanium alloy it is shown that successive surface modification of additive manufactured metal specimens in vacuum at an argon pressure of 3.5·10-2 by ten pulses with 200 μs, 45 J/cm2 and then by three pulses with 50 μm, 20 J/cm2 provides a considerable decrease in their porosity and surface roughness (20 times for Ra) while their surface microhardness, friction coefficient, and wear level remain almost unchanged. After electron beam irradiation, the ultimate tensile strength of the material increases 1.33 times, and its tensile strain 1.18 times. For specimens obtained by conventional metallurgy and irradiated in the same modes, no such effects are observed.

  14. What Would Buffy Do? The Use of Popular Culture Examples in Undergraduate Library Instruction.

    ERIC Educational Resources Information Center

    Marshall, Jerilyn

    This paper presents results of a survey that gathered information on the use of popular culture examples in college library instruction sessions, including the types of popular culture materials currently being used as examples, the types of courses in which they are used, the librarians' purposes in using the examples, and the librarians'…

  15. Generalized neurofuzzy network modeling algorithms using Bézier-Bernstein polynomial functions and additive decomposition.

    PubMed

    Hong, X; Harris, C J

    2000-01-01

    This paper introduces a new neurofuzzy model construction algorithm for nonlinear dynamic systems based upon basis functions that are Bézier-Bernstein polynomial functions. This paper is generalized in that it copes with n-dimensional inputs by utilising an additive decomposition construction to overcome the curse of dimensionality associated with high n. This new construction algorithm also introduces univariate Bézier-Bernstein polynomial functions for the completeness of the generalized procedure. Like the B-spline expansion based neurofuzzy systems, Bézier-Bernstein polynomial function based neurofuzzy networks hold desirable properties such as nonnegativity of the basis functions, unity of support, and interpretability of basis function as fuzzy membership functions, moreover with the additional advantages of structural parsimony and Delaunay input space partition, essentially overcoming the curse of dimensionality associated with conventional fuzzy and RBF networks. This new modeling network is based on additive decomposition approach together with two separate basis function formation approaches for both univariate and bivariate Bézier-Bernstein polynomial functions used in model construction. The overall network weights are then learnt using conventional least squares methods. Numerical examples are included to demonstrate the effectiveness of this new data based modeling approach.

  16. 30 CFR 285.543 - Example of how the inverse distance formula works.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Example of how the inverse distance formula works. 285.543 Section 285.543 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR... Financial Assurance Requirements Revenue Sharing with States § 285.543 Example of how the inverse distance...

  17. Integrating Worked Examples into Problem Posing in a Web-Based Learning Environment

    ERIC Educational Resources Information Center

    Hsiao, Ju-Yuan; Hung, Chun-Ling; Lan, Yu-Feng; Jeng, Yoau-Chau

    2013-01-01

    Most students always lack of experience and perceive difficult regarding problem posing. The study hypothesized that worked examples may have benefits for supporting students' problem posing activities. A quasi-experiment was conducted in the context of a business mathematics course for examining the effects of integrating worked examples into…

  18. Dancing with data: an example of acquiring theoretical sensitivity in a grounded theory study.

    PubMed

    Hoare, Karen J; Mills, Jane; Francis, Karen

    2012-06-01

    Glaser suggested that the conceptual route from data collection to a grounded theory is a set of double back steps. The route forward inevitably results in the analyst stepping back. Additionally sidestepping through, leading participants down lines of inquiry and following data threads with other participants, is also characteristic of acquiring theoretical sensitivity, a key concept in grounded theory. Other ways of acquiring theoretical sensitivity comprise: reading the literature, open coding, category building, reflecting in memos followed by doubling back on data collection once further lines of inquiry are opened up. This paper describes how we 'danced with data' in pursuit of heightened theoretical sensitivity in a grounded theory study of information use by nurses working in general practice in New Zealand. Providing an example of how analytical tools are employed to theoretically sample emerging concepts. © 2012 Blackwell Publishing Asia Pty Ltd.

  19. Migration of fluorochemical paper additives from food-contact paper into foods and food simulants.

    PubMed

    Begley, T H; Hsu, W; Noonan, G; Diachenko, G

    2008-03-01

    Fluorochemical-treated paper was tested to determine the amount of migration that occurs into foods and food-simulating liquids and the characteristics of the migration. Migration characteristics of fluorochemicals from paper were examined in Miglyol, butter, water, vinegar, water-ethanol solutions, emulsions and pure oil containing small amounts of emulsifiers. Additionally, microwave popcorn and chocolate spread were used to investigate migration. Results indicate that fluorochemicals paper additives do migrate to food during actual package use. For example, we found that microwave popcorn contained 3.2 fluorochemical mg kg(-1) popcorn after popping and butter contained 0.1 mg kg(-1) after 40 days at 4 degrees C. Tests also indicate that common food-simulating liquids for migration testing and package material evaluation might not provide an accurate indication of the amount of fluorochemical that actually migrates to food. Tests show that oil containing small amounts of an emulsifier can significantly enhance migration of a fluorochemical from paper.

  20. Why Downside Beta Is Better: An Educational Example

    ERIC Educational Resources Information Center

    Chong, James T.; Jennings, William P.; Phillips, G. Michael

    2013-01-01

    An educational example is presented that is an effective teaching illustration to help students understand the difference between traditional CAPM beta and downside (or down-market) beta and why downside beta is a superior measure for use in personal financial planning investment policy statements.

  1. Example-Based Learning: Effects of Model Expertise in Relation to Student Expertise

    ERIC Educational Resources Information Center

    Boekhout, Paul; van Gog, Tamara; van de Wiel, Margje W. J.; Gerards-Last, Dorien; Geraets, Jacques

    2010-01-01

    Background: Worked examples are very effective for novice learners. They typically present a written-out ideal (didactical) solution for learners to study. Aims: This study used worked examples of patient history taking in physiotherapy that presented a "non"-didactical solution (i.e., based on actual performance). The effects of model expertise…

  2. Surprise! Infants Consider Possible Bases of Generalization for a Single Input Example

    ERIC Educational Resources Information Center

    Gerken, LouAnn; Dawson, Colin; Chatila, Razanne; Tenenbaum, Josh

    2015-01-01

    Infants have been shown to generalize from a small number of input examples. However, existing studies allow two possible means of generalization. One is via a process of noting similarities shared by several examples. Alternatively, generalization may reflect an implicit desire to explain the input. The latter view suggests that generalization…

  3. Working Examples (WEx): A Vehicle for Building Radical Innovations to Change Education

    ERIC Educational Resources Information Center

    Zywica, Jolene; Roberts, Anna; Davidson, Drew

    2013-01-01

    Working Examples (WEx) is described by the authors as a vehicle for ideating and building radical innovations to change education. It is a community of researchers, designers, and educators working at the intersection of education and technology. "Examples" (ideas, work, and projects) allow people to explore new ideas, learn from each…

  4. A Comparison of Inquiry and Worked Example Web-Based Instruction Using Physlets

    ERIC Educational Resources Information Center

    Lee, Kevin M.; Nicoll, Gayle; Brooks, David W.

    2004-01-01

    This paper compares two protocols for web-based instruction using simulations in an introductory physics class. The Inquiry protocol allowed students to control input parameters while the Worked Example protocol did not. Students in the Worked Example group performed significantly higher on a common assessment. The ramifications of this study are…

  5. Be a Healthy Role Model for Children: 10 Tips for Setting Good Examples

    MedlinePlus

    ... model for children 10 tips for setting good examples You are the most important influence on your ... make mealtime a family time! 1 show by example Eat vegetables, fruits, and whole grains with meals ...

  6. Illustrated Examples of the Effects of Risk Preferences and Expectations on Bargaining Outcomes.

    ERIC Educational Resources Information Center

    Dickinson, David L.

    2003-01-01

    Describes bargaining examples that use expected utility theory. Provides example results that are intuitive, shown graphically and algebraically, and offer upper-level student samples that illustrate the usefulness of the expected utility theory. (JEH)

  7. A holistic approach to food safety risks: Food fraud as an example.

    PubMed

    Marvin, Hans J P; Bouzembrak, Yamine; Janssen, Esmée M; van der Fels-Klerx, H J; van Asselt, Esther D; Kleter, Gijs A

    2016-11-01

    Production of sufficient, safe and nutritious food is a global challenge faced by the actors operating in the food production chain. The performance of food-producing systems from farm to fork is directly and indirectly influenced by major changes in, for example, climate, demographics, and the economy. Many of these major trends will also drive the development of food safety risks and thus will have an effect on human health, local societies and economies. It is advocated that a holistic or system approach taking into account the influence of multiple "drivers" on food safety is followed to predict the increased likelihood of occurrence of safety incidents so as to be better prepared to prevent, mitigate and manage associated risks. The value of using a Bayesian Network (BN) modelling approach for this purpose is demonstrated in this paper using food fraud as an example. Possible links between food fraud cases retrieved from the RASFF (EU) and EMA (USA) databases and features of these cases provided by both the records themselves and additional data obtained from other sources are demonstrated. The BN model was developed from 1393 food fraud cases and 15 different data sources. With this model applied to these collected data on food fraud cases, the product categories that thus showed the highest probabilities of being fraudulent were "fish and seafood" (20.6%), "meat" (13.4%) and "fruits and vegetables" (10.4%). Features of the country of origin appeared to be important factors in identifying the possible hazards associated with a product. The model had a predictive accuracy of 91.5% for the fraud type and demonstrates how expert knowledge and data can be combined within a model to assist risk managers to better understand the factors and their interrelationships. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Implications of sedimentological studies for environmental pollution assessment and management: Examples from fluvial systems in North Queensland and Western Australia

    NASA Astrophysics Data System (ADS)

    Eyre, Bradley; McConchie, David

    1993-05-01

    Sedimentology is of increasing importance in environmental research, particularly environmental pollution studies, where past trends in environmental processes need to be combined with data on present conditions to predict likely future changes—the past and present as a key to the future. Two examples are used to illustrate the role of sedimentology in assessing the influence of major processes on the transport, accumulation, deposition and modification of contaminants in fluvial/estuarine systems and in developing environmental management plans. Example 1 shows that when assessing nutrient behaviour in fluvial/estuarine depositional settings, it is important to examine the partitioning of phosphorus between grain size fractions to evaluate the sedimentological processes which control the dispersion and trapping of these contaminants. Example 2 shows that in studies of anthropogenic metal inputs to modern depositional settings, lateral and stratigraphic trends in sediment texture and mineralogy should be examined, in addition to trends in metal loads and evaluation of the prevailing physical, chemical and biological processes that may influence metal mobility and dispersion. Clearly, basic sedimentological data should form part of any assessment of potentially contaminated sites and part of investigations into the dispersion and trapping of contaminants in fluvial systems. These data are also required for rational environmental management to ensure that planning decisions are compatible with natural environmental constraints.

  9. Multiple-solution problems in a statistics classroom: an example

    NASA Astrophysics Data System (ADS)

    Chu, Chi Wing; Chan, Kevin L. T.; Chan, Wai-Sum; Kwong, Koon-Shing

    2017-11-01

    The mathematics education literature shows that encouraging students to develop multiple solutions for given problems has a positive effect on students' understanding and creativity. In this paper, we present an example of multiple-solution problems in statistics involving a set of non-traditional dice. In particular, we consider the exact probability mass distribution for the sum of face values. Four different ways of solving the problem are discussed. The solutions span various basic concepts in different mathematical disciplines (sample space in probability theory, the probability generating function in statistics, integer partition in basic combinatorics and individual risk model in actuarial science) and thus promotes upper undergraduate students' awareness of knowledge connections between their courses. All solutions of the example are implemented using the R statistical software package.

  10. Passive and active adaptive management: Approaches and an example

    USGS Publications Warehouse

    Williams, B.K.

    2011-01-01

    Adaptive management is a framework for resource conservation that promotes iterative learning-based decision making. Yet there remains considerable confusion about what adaptive management entails, and how to actually make resource decisions adaptively. A key but somewhat ambiguous distinction in adaptive management is between active and passive forms of adaptive decision making. The objective of this paper is to illustrate some approaches to active and passive adaptive management with a simple example involving the drawdown of water impoundments on a wildlife refuge. The approaches are illustrated for the drawdown example, and contrasted in terms of objectives, costs, and potential learning rates. Some key challenges to the actual practice of AM are discussed, and tradeoffs between implementation costs and long-term benefits are highlighted. ?? 2010 Elsevier Ltd.

  11. 32 CFR 806.30 - FOIA exempt information examples.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 806.30 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION AIR FORCE FREEDOM OF INFORMATION ACT PROGRAM § 806.30 FOIA exempt information examples. (a) Certain responsive records may contain parts that are releasable, along with other parts that the Air Force must...

  12. Developing Transferable Skills: Some Examples from Geomorphology Teaching.

    ERIC Educational Resources Information Center

    Mottershead, Derek; Suggitt, Steve

    1996-01-01

    Demonstrates how the development of transferable skills can be promoted as a matter of policy in undergraduate geography programs and implemented throughout individual classes. Defines transferable skills as skills of a widely applicable nature independent of the disciplinary context. Presents two examples of transferable skill development in…

  13. LED's in Physics Demos: A Handful of Examples.

    ERIC Educational Resources Information Center

    Lottis, Dan; Jaeger, Herbert

    1996-01-01

    Describes the use of light-emitting diodes (LED) instead of incandescent bulbs in experiments that generally use battery and bulbs to enable students to explore and understand fundamental electrical phenomena. Presents the following examples: Faraday's Law demonstration, conductors and insulators, and rectifying action of a diode. (JRH)

  14. Rhodium-Catalyzed Asymmetric 1,4-Additions, in Water at Room Temperature, with In-Flask Catalyst Recycling

    PubMed Central

    Lipshutz, Bruce H.; Isley, Nicholas A.; Moser, Ralph; Ghorai, Subir; Leuser, Helena; Taft, Benjamin R.

    2013-01-01

    Using the newly introduced designer surfactant polyethyleneglycol ubiquinol sebacate (PQS), as the platform for micellar catalysis, nonracemic BINAP has been covalently attached and rhodium(I) inserted to form PQS-BINAP-Rh. This species, the first example of a nonracemically-ligated transition metal catalyst-tethered amphiphile, can be utilized for Rh-catalyzed asymmetric conjugate addition reactions of arylboronic acids to acyclic and cyclic enones. These are performed in water at room temperature, while the catalyst can be recycled without its removal from water in the reaction vessel. PMID:24659941

  15. Example based lesion segmentation

    NASA Astrophysics Data System (ADS)

    Roy, Snehashis; He, Qing; Carass, Aaron; Jog, Amod; Cuzzocreo, Jennifer L.; Reich, Daniel S.; Prince, Jerry; Pham, Dzung

    2014-03-01

    Automatic and accurate detection of white matter lesions is a significant step toward understanding the progression of many diseases, like Alzheimer's disease or multiple sclerosis. Multi-modal MR images are often used to segment T2 white matter lesions that can represent regions of demyelination or ischemia. Some automated lesion segmentation methods describe the lesion intensities using generative models, and then classify the lesions with some combination of heuristics and cost minimization. In contrast, we propose a patch-based method, in which lesions are found using examples from an atlas containing multi-modal MR images and corresponding manual delineations of lesions. Patches from subject MR images are matched to patches from the atlas and lesion memberships are found based on patch similarity weights. We experiment on 43 subjects with MS, whose scans show various levels of lesion-load. We demonstrate significant improvement in Dice coefficient and total lesion volume compared to a state of the art model-based lesion segmentation method, indicating more accurate delineation of lesions.

  16. Anti-Wear Performance and Mechanism of an Oil-Miscible Ionic Liquid as a Lubricant Additive

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Qu, Jun; Bansal, Dinesh G; Yu, Bo

    2012-01-01

    An ionic liquid (IL) trihexyltetradecylphosphonium bis(2-ethylhexyl) phosphate has been investigated as a potential anti-wear lubricant additive. Unlike most other ILs that have very low solubility in non-polar fluids, this IL is fully miscible with various hydrocarbon oils. In addition, it is thermally stable up to 347 oC, showed no corrosive attack to cast iron in ambient environment, and has excellent wettability on solid surfaces (e.g., contact angle on cast iron <8o). Most importantly, this phosphonium-based IL has demonstrated effective anti-scuffing and anti-wear characteristics when blended with lubricating oils. For example, a 5 wt.% addition into a synthetic base oil eliminatedmore » the scuffing failure experienced by the neat oil and, as a result, reduced the friction coefficient by 60% and the wear rate by three orders of magnitude. A synergistic effect on wear protection was observed with the current anti-wear additive when added into a fully-formulated engine oil. Nanostructure examination and composition analysis revealed a tribo-boundary film and subsurface plastic deformation zone for the metallic surface lubricated by the IL-containing lubricants. This protective boundary film is believed to be responsible for the IL s anti-scuffing and anti-wear functionality.« less

  17. Tracking down the origins of Advanced LIGO noise: 2 examples

    NASA Astrophysics Data System (ADS)

    Berger, Beverly K.; LIGO Scientific Collaboration Collaboration

    2016-03-01

    For Advanced LIGO to reach design sensitivity various sources of instrumental and environmental noise must be identified and ameliorated. We discuss 2 efforts to search for the origin of noise bursts (glitches) at LIGO Hanford. Advanced LIGO monitors thousands of channels in addition to the gravitational wave channel. These can be studied to find correlations between the gravitational wave channel and other sensor signals. The first type of glitch had a frequency of 50 Hz and a rate of 1 per minute. It was found that the glitches were correlated with ground motion in the end station of the X-arm where the offending air compressor was tracked down and turned off. The second example manifests itself as a sudden, but brief, drop in the range occurring, typically, several times per day at LIGO Hanford and less frequently at LIGO Livingston. These range-drop glitches appear in the gravitational-wave channel. Although correlations with these glitches can be seen in many channels, it cannot be easily determined whether these channels are responding as an effect of this type of very strong glitch or whether they might be related to their cause or causes. To date, the cause of the range-drop glitches is not known.

  18. PUMAS: The On-line journal of Math and Science Examples for Pre-College Education

    NASA Astrophysics Data System (ADS)

    Trainer, Melissa G.; Kahn, Ralph A.

    2015-11-01

    PUMAS - “Practical Uses of Math And Science” - is an on-line collection of brief examples showing how math and science topics taught in K-12 classes can be used in interesting settings, including every day life. The examples are written primarily by scientists, engineers, and other content experts having practical experience with the material. They are aimed mainly at classroom teachers to enrich their presentation of math and science topics. The goal of PUMAS is to capture, for the benefit of pre-college education, the flavor of the vast experience that working scientists have with interesting and practical uses of math and science. There are currently over 80 examples in the PUMAS collection, and they are organized by curriculum topics and tagged with relevant grade levels and curriculum topic benchmarks. The published examples cover a wide range of subject matter: from demonstrating why summer is hot, to describing the fluid dynamics of a lava lamp, to calculating the best age to collect Social Security Benefits. The examples are available to all interested parties via the PUMAS web site: http://pumas.nasa.gov/.We invite the community to participate in the PUMAS collection. We seek scientists and scientific thinkers to provide innovative examples of practical uses for teachers to use to enrich the classroom experience, and content experts to participate in peer-review. We also seek teachers to review examples for originality, accuracy of content, clarity of presentation, and grade-level appropriateness. Finally, we encourage teachers to mine this rich repository for real-world examples to demonstrate the value of math in science in everyday life.

  19. Case-Based Learning with Worked Examples in Complex Domains: Two Experimental Studies in Undergraduate Medical Education

    ERIC Educational Resources Information Center

    Stark, Robin; Kopp, Veronika; Fischer, Martin R.

    2011-01-01

    To investigate the effects of example format (erroneous examples vs. correct examples) and feedback format (elaborated feedback vs. knowledge of results feedback) on medical students' diagnostic competence in the context of a web-based learning environment containing case-based worked examples, two studies with a 2 x 2 design were conducted in the…

  20. Development of Benchmark Examples for Quasi-Static Delamination Propagation and Fatigue Growth Predictions

    NASA Technical Reports Server (NTRS)

    Krueger, Ronald

    2012-01-01

    The development of benchmark examples for quasi-static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for Abaqus/Standard. The example is based on a finite element model of a Double-Cantilever Beam specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, a quasi-static benchmark example was created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall the results are encouraging, but further assessment for mixed-mode delamination is required.

  1. Computerized Adaptive Testing: An Overview and an Example.

    ERIC Educational Resources Information Center

    McBride, James R.

    The advantages of computerized adaptive testing are discussed, and an example illustrates its use in sixth grade mathematics. These tests are administered at a computer terminal, and the test items to be administered are selected according to the difficulty level appropriate to the individual's ability. Tailoring increases the psychometric…

  2. Transformative Learning in Practice: Examples from Extension Education

    ERIC Educational Resources Information Center

    Reichenbach, Michael R.; Muth, Allyson B.; Smith, Sanford S.

    2013-01-01

    Transformative learning can lead to great awareness of one's own and others' personal perspectives and result in changes in how participants understand important social issues and how they choose to take action or not. Three examples of Extension teaching that embrace transformative learning are presented: a phenomenological approach to…

  3. Using a Sequence of Number Pairs as an Example in Teaching Mathematics

    ERIC Educational Resources Information Center

    Mauch, Elizabeth; Shi, Yixun

    2005-01-01

    A sequence of number pairs can be used to generate many interesting examples in teaching mathematics subjects at various levels. It is often used in elementary or middle school mathematics classes to illustrate the concept of "patterns." In this paper the authors present a few interesting ways of using this sequence to form examples for high…

  4. Actuation for simultaneous motions and constraining efforts: an open chain example

    NASA Astrophysics Data System (ADS)

    Perreira, N. Duke

    1997-06-01

    A brief discussion on systems where simultaneous control of forces and velocities are desirable is given and an example linkage with revolute and prismatic joint is selected for further analysis. The Newton-Euler approach for dynamic system analysis is applied to the example to provide a basis of comparison. Gauge invariant transformations are used to convert the dynamic equations into invariant form suitable for use in a new dynamic system analysis method known as the motion-effort approach. This approach uses constraint elimination techniques based on singular value decompositions to recast the invariant form of dynamic system equations into orthogonal sets of motion and effort equations. Desired motions and constraining efforts are partitioned into ideally obtainable and unobtainable portions which are then used to determine the required actuation. The method is applied to the example system and an analytic estimate to its success is made.

  5. Constant-Pressure Combustion Charts Including Effects of Diluent Addition

    NASA Technical Reports Server (NTRS)

    Turner, L Richard; Bogart, Donald

    1949-01-01

    Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

  6. Ordering Elements and Subsets: Examples for Student Understanding

    ERIC Educational Resources Information Center

    Mellinger, Keith E.

    2004-01-01

    Teaching the art of counting can be quite difficult. Many undergraduate students have difficulty separating the ideas of permutation, combination, repetition, etc. This article develops some examples to help explain some of the underlying theory while looking carefully at the selection of various subsets of objects from a larger collection. The…

  7. Learning from Video Modeling Examples: Does Gender Matter?

    ERIC Educational Resources Information Center

    Hoogerheide, Vincent; Loyens, Sofie M. M.; van Gog, Tamara

    2016-01-01

    Online learning from video modeling examples, in which a human model demonstrates and explains how to perform a learning task, is an effective instructional method that is increasingly used nowadays. However, model characteristics such as gender tend to differ across videos, and the model-observer similarity hypothesis suggests that such…

  8. Solid sand particle addition can enhance the production of resting cysts in dinoflagellates

    NASA Astrophysics Data System (ADS)

    Yang, Aoao; Hu, Zhangxi; Tang, Yingzhong

    2018-03-01

    Resting cysts are an important part of the life cycle for many harmful algal bloom-forming dinoflagellates, and play vital roles in the recurrence and geographical spread of harmful algal blooms. Numerous factors have been suggested to regulate the formation of resting cysts, although only a few have been proven to be significant. Cyst formation can be induced by adverse environmental conditions such as drastic changes in temperature, light, salinity, and nutrient levels, and by biological interactions. In this study, we evaluated the ability of an artificial factor (fine sand particles) to enhance the formation of resting cysts. Fine sand particles were added to cultures of dinoflagellates that are known to produce cysts. The addition of fine sand particles significantly increased both the production rate and final yield of cysts in cultures of Scrippsiella trochoidea, Biecheleria brevisulcata, and Levanderina fissa (= Gymnodinium fissum, Gyrodinium instriatum, Gyrodinium uncatenum). The largest increase in the final yield (107-fold) of cysts as a result of sand addition was in S. trochoidea. However, addition of fine sand particles did not induce cyst formation, or barely affected cyst formation, in Akashiwo sanguinea, Cochlodinium polykrikoides and Pheopolykrikos hartmannii, which are also known to be cyst-producing species. We speculated that addition of sand significantly increased the chances of cell collision, which triggered cyst formation. However, further research is required to test this idea. Importantly, our findings indicate that the addition of fine sand particles is a useful method to obtain a large quantity of cysts in a short time for laboratory studies or tests; for example, if a cyst viability test is being used to assess the effectiveness of ships' ballast water treatment.

  9. Wise Additions Bridge the Gap between Social Psychology and Clinical Practice: Cognitive-Behavioral Therapy as an Exemplar

    PubMed Central

    Folk, Johanna B.; Disabato, David J.; Goodman, Fallon R.; Carter, Sarah P.; DiMauro, Jennifer C.; Riskind, John H.

    2017-01-01

    Progress in clinical science, theory, and practice requires the integration of advances from multiple fields of psychology, but much integration remains to be done. The current article seeks to address the specific gap that exists between basic social psychological theories and the implementation of related therapeutic techniques. We propose several “wise additions,” based upon the principles outlined by Walton (2014), intended to bridge current social psychological research with clinical psychological therapeutic practice using cognitive behavioral therapy as an example. We consider how recent advances in social psychological theories can inform the development and implementation of wise additions in clinical case conceptualization and interventions. We specifically focus on self and identity, self-affirmation, transference, social identity, and embodied cognition, five dominant areas of interest in the field that have clear clinical applications. PMID:28919701

  10. Hyperspectral Sulfur Detection Using an SVM with Extreme Minority Positive Examples Onboard EO-1

    NASA Astrophysics Data System (ADS)

    Mandrake, Lukas; Wagstaff, Kiri L.; Gleeson, Damhnait; Rebbapragada, Umaa; Tran, Daniel; Castano, Rebecca; Chien, Steven; Pappalardo, Robert T.

    2009-09-01

    Onboard classification of remote sensing data is of general interest given that it can be used as a trigger to initiate alarms, data download, additional higher- resolution scans, or more frequent scans of an area without ground interaction. In our case, we study the sulfur-rich Borup-Fiord glacial springs in Canada utilizing the Hyperion instrument aboard the EO-1 spacecraft. This system consists of naturally occurring sulfur-rich springs emerging from glacial ice, which are a known environment for microbial life. The biological activity of the spring is associated with sulfur compounds that can be detected remotely via spectral analysis. This system may offer an analog to far more exotic locales such as Europa where remote sensing of biogenic indicators is of considerable interest. Unfortunately, spacecraft processing power and memory is severely limited which places strong constraints on the algorithms available. Previous work has been performed in the generation and execution of an onboard SVM (support vector machine) classifier to autonomously identify the presence of sulfur compounds associated with the activity of microbial life. However, those results were limited in the number of positive examples available to be labeled. In this paper we extend the sample size from 1 to 7 example scenes between 2006 and 2008, corresponding to a change from 18 to 235 positive labels. Of key interest is our assessment of the classifier's behavior on non-sulfur-bearing imagery far from the training region. Selection of the most relevant spectral bands and parameters for the SVM are also explored.

  11. Application Examples for Handle System Usage

    NASA Astrophysics Data System (ADS)

    Toussaint, F.; Weigel, T.; Thiemann, H.; Höck, H.; Stockhause, M.; Lautenschlager, M.

    2012-12-01

    Besides the well-known DOI (Digital Object Identifiers) as a special form of Handles that resolve to scientific publications there are various other applications in use. Others perhaps are just not yet. We present some examples for the existing ones and some ideas for the future. The national German project C3-Grid provides a framework to implement a first solution for provenance tracing and explore unforeseen implications. Though project-specific, the high-level architecture is generic and represents well a common notion of data derivation. Users select one or many input datasets and a workflow software module (an agent in this context) to execute on the data. The output data is deposited in a repository to be delivered to the user. All data is accompanied by an XML metadata document. All input and output data, metadata and the workflow module receive Handles and are linked together to establish a directed acyclic graph of derived data objects and involved agents. Data that has been modified by a workflow module is linked to its predecessor data and the workflow module involved. Version control systems such as svn or git provide Internet access to software repositories using URLs. To refer to a specific state of the source code of for instance a C3 workflow module, it is sufficient to reference the URL to the svn revision or git hash. In consequence, individual revisions and the repository as a whole receive PIDs. Moreover, the revision specific PIDs are linked to their respective predecessors and become part of the provenance graph. Another example for usage of PIDs in a current major project is given in EUDAT (European Data Infrastructure) which will link scientific data of several research communities together. In many fields it is necessary to provide data objects at multiple locations for a variety of applications. To ensure consistency, not only the master of a data object but also its copies shall be provided with a PID. To verify transaction safety and to

  12. An Example-Based Brain MRI Simulation Framework.

    PubMed

    He, Qing; Roy, Snehashis; Jog, Amod; Pham, Dzung L

    2015-02-21

    The simulation of magnetic resonance (MR) images plays an important role in the validation of image analysis algorithms such as image segmentation, due to lack of sufficient ground truth in real MR images. Previous work on MRI simulation has focused on explicitly modeling the MR image formation process. However, because of the overwhelming complexity of MR acquisition these simulations must involve simplifications and approximations that can result in visually unrealistic simulated images. In this work, we describe an example-based simulation framework, which uses an "atlas" consisting of an MR image and its anatomical models derived from the hard segmentation. The relationships between the MR image intensities and its anatomical models are learned using a patch-based regression that implicitly models the physics of the MR image formation. Given the anatomical models of a new brain, a new MR image can be simulated using the learned regression. This approach has been extended to also simulate intensity inhomogeneity artifacts based on the statistical model of training data. Results show that the example based MRI simulation method is capable of simulating different image contrasts and is robust to different choices of atlas. The simulated images resemble real MR images more than simulations produced by a physics-based model.

  13. Wallet Neuritis - An Example of Peripheral Sensitization.

    PubMed

    Siddiq, Md Abu Bakar; Jahan, Israt; Masihuzzaman, Sam

    2017-03-09

    Wallet neuritis is an example of extra-spinal tunnel neuropathy concerning sciatic nerve. Its clinical appearance often gets confused with sciatica of lumbar spine origin. Wallet-induced chronic sciatic nerve constriction produces gluteal and ipsilateral lower extremity pain, tingling, and burning sensation. It was Lutz, first describing credit-card wallet sciatica in an Attorney, surfaced on Journal of American Medical Association (JAMA), 1978; however, the condition has not been well-studied in various other occupations. In this write-up, I take the privilege of demonstrating wallet neuritis as an example of peripheral sensitization in three different professionals namely specialist doctor, driver, and banker first time in Bangladesh. All the three patients demonstrated about aggravated gluteal pain with radiation on the ipsilateral lower extremity while remained seated on heavy wallet for a while, fortunately improved discontinuing such stuff with. Alongside, radical wallectomy, piriformis stretching exercise on the affected side had also been recommended and found worthy in terms of pain relief. long-standing use of rear pocket wallet may compress and sensitize ipsilateral sciatic nerve, generating features resembling lumbago sciatica; thereby, remains a source of patients' misery and diagnostic illusion for pain physicians as well. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  14. Regional Morphology Analysis Package (RMAP): Empirical Orthogonal Function Analysis, Background and Examples

    DTIC Science & Technology

    2007-10-01

    1984. Complex principal component analysis : Theory and examples. Journal of Climate and Applied Meteorology 23: 1660-1673. Hotelling, H. 1933...Sediments 99. ASCE: 2,566-2,581. Von Storch, H., and A. Navarra. 1995. Analysis of climate variability. Applications of statistical techniques. Berlin...ERDC TN-SWWRP-07-9 October 2007 Regional Morphology Empirical Analysis Package (RMAP): Orthogonal Function Analysis , Background and Examples by

  15. Index cost estimate based BIM method - Computational example for sports fields

    NASA Astrophysics Data System (ADS)

    Zima, Krzysztof

    2017-07-01

    The paper presents an example ofcost estimation in the early phase of the project. The fragment of relative database containing solution, descriptions, geometry of construction object and unit cost of sports facilities was shown. The Index Cost Estimate Based BIM method calculationswith use of Case Based Reasoning were presented, too. The article presentslocal and global similarity measurement and example of BIM based quantity takeoff process. The outcome of cost calculations based on CBR method was presented as a final result of calculations.

  16. A rational account of pedagogical reasoning: teaching by, and learning from, examples.

    PubMed

    Shafto, Patrick; Goodman, Noah D; Griffiths, Thomas L

    2014-06-01

    Much of learning and reasoning occurs in pedagogical situations--situations in which a person who knows a concept chooses examples for the purpose of helping a learner acquire the concept. We introduce a model of teaching and learning in pedagogical settings that predicts which examples teachers should choose and what learners should infer given a teacher's examples. We present three experiments testing the model predictions for rule-based, prototype, and causally structured concepts. The model shows good quantitative and qualitative fits to the data across all three experiments, predicting novel qualitative phenomena in each case. We conclude by discussing implications for understanding concept learning and implications for theoretical claims about the role of pedagogy in human learning. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. 21 CFR 25.32 - Foods, food additives, and color additives.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... use in food, drugs, devices, or cosmetics. (d) Testing and certification of batches of a color... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Foods, food additives, and color additives. 25.32 Section 25.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL...

  18. 21 CFR 25.32 - Foods, food additives, and color additives.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... use in food, drugs, devices, or cosmetics. (d) Testing and certification of batches of a color... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Foods, food additives, and color additives. 25.32 Section 25.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL...

  19. 21 CFR 25.32 - Foods, food additives, and color additives.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... use in food, drugs, devices, or cosmetics. (d) Testing and certification of batches of a color... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Foods, food additives, and color additives. 25.32 Section 25.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL...

  20. 21 CFR 25.32 - Foods, food additives, and color additives.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... use in food, drugs, devices, or cosmetics. (d) Testing and certification of batches of a color... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Foods, food additives, and color additives. 25.32 Section 25.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL...

  1. 21 CFR 25.32 - Foods, food additives, and color additives.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... use in food, drugs, devices, or cosmetics. (d) Testing and certification of batches of a color... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Foods, food additives, and color additives. 25.32 Section 25.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL...

  2. How Children Use Examples to Make Conditional Predictions

    ERIC Educational Resources Information Center

    Kalish, Charles W.

    2010-01-01

    Two experiments explored children's and adults' use of examples to make conditional predictions. In Experiment 1 adults (N = 20) but not 4-year-olds (N = 21) or 8-year-olds (N =1 8) distinguished predictable from unpredictable features when features were partially correlated (e.g., necessary but not sufficient). Children did make reliable…

  3. Quantification of Treatment Effect Modification on Both an Additive and Multiplicative Scale

    PubMed Central

    Girerd, Nicolas; Rabilloud, Muriel; Pibarot, Philippe; Mathieu, Patrick; Roy, Pascal

    2016-01-01

    Background In both observational and randomized studies, associations with overall survival are by and large assessed on a multiplicative scale using the Cox model. However, clinicians and clinical researchers have an ardent interest in assessing absolute benefit associated with treatments. In older patients, some studies have reported lower relative treatment effect, which might translate into similar or even greater absolute treatment effect given their high baseline hazard for clinical events. Methods The effect of treatment and the effect modification of treatment were respectively assessed using a multiplicative and an additive hazard model in an analysis adjusted for propensity score in the context of coronary surgery. Results The multiplicative model yielded a lower relative hazard reduction with bilateral internal thoracic artery grafting in older patients (Hazard ratio for interaction/year = 1.03, 95%CI: 1.00 to 1.06, p = 0.05) whereas the additive model reported a similar absolute hazard reduction with increasing age (Delta for interaction/year = 0.10, 95%CI: -0.27 to 0.46, p = 0.61). The number needed to treat derived from the propensity score-adjusted multiplicative model was remarkably similar at the end of the follow-up in patients aged < = 60 and in patients >70. Conclusions The present example demonstrates that a lower treatment effect in older patients on a relative scale can conversely translate into a similar treatment effect on an additive scale due to large baseline hazard differences. Importantly, absolute risk reduction, either crude or adjusted, can be calculated from multiplicative survival models. We advocate for a wider use of the absolute scale, especially using additive hazard models, to assess treatment effect and treatment effect modification. PMID:27045168

  4. smwrData—An R package of example hydrologic data, version 1.1.1

    USGS Publications Warehouse

    Lorenz, David L.

    2015-11-06

    A collection of 24 datasets, including streamflow, well characteristics, groundwater elevations, and discrete water-quality concentrations, is provided to produce a consistent set of example data to demonstrate typical data manipulations or statistical analysis of hydrologic data. These example data are provided in an R package called smwrData. The data in the package have been collected by the U.S. Geological Survey or published in its reports, for example Helsel and Hirsch (2002). The R package provides a convenient mechanism for distributing the data to users of R within the U.S. Geological Survey and other users in the R community.

  5. SmaggIce 2.0: Additional Capabilities for Interactive Grid Generation of Iced Airfoils

    NASA Technical Reports Server (NTRS)

    Kreeger, Richard E.; Baez, Marivell; Braun, Donald C.; Schilling, Herbert W.; Vickerman, Mary B.

    2008-01-01

    The Surface Modeling and Grid Generation for Iced Airfoils (SmaggIce) software toolkit has been extended to allow interactive grid generation for multi-element iced airfoils. The essential phases of an icing effects study include geometry preparation, block creation and grid generation. SmaggIce Version 2.0 now includes these main capabilities for both single and multi-element airfoils, plus an improved flow solver interface and a variety of additional tools to enhance the efficiency and accuracy of icing effects studies. An overview of these features is given, especially the new multi-element blocking strategy using the multiple wakes method. Examples are given which illustrate the capabilities of SmaggIce for conducting an icing effects study for both single and multi-element airfoils.

  6. Limitations and Functions: Four Examples of Integrating Thermodynamics

    ERIC Educational Resources Information Center

    Chang, Wheijen

    2011-01-01

    Physics students are usually unaware of the limitations and functions of related principles, and they tend to adopt "hot formulas" inappropriately. This paper introduces four real-life examples for bridging five principles, from fluids to thermodynamics, including (1) buoyant force, (2) thermal expansion, (3) the ideal-gas law, (4) the 1st law,…

  7. Language Policies as Virtual Realities: Two Australian Examples.

    ERIC Educational Resources Information Center

    Moore, Helen

    This chapter uses the insights of Dorothy Smith and Anna Yeatman, both feminist scholars, to explore the nature of policy formation through two examples from Australia. Smith and Yeatman argue that all description is both biased and interested. The article documents how the values of pluralism and equity were not served well by Australian policy…

  8. Learning Algebra by Example in Real-World Classrooms

    ERIC Educational Resources Information Center

    Booth, Julie L.; Oyer, Melissa H.; Paré-Blagoev, E. Juliana; Elliot, Andrew J.; Barbieri, Christina; Augustine, Adam; Koedinger, Kenneth R.

    2015-01-01

    Math and science textbook chapters invariably supply students with sets of problems to solve, but this widely used approach is not optimal for learning; instead, more effective learning can be achieved when many problems to solve are replaced with correct and incorrect worked examples for students to study and explain. In the present study, the…

  9. Stopping Distances: An Excellent Example of Empirical Modelling.

    ERIC Educational Resources Information Center

    Lawson, D. A.; Tabor, J. H.

    2001-01-01

    Explores the derivation of empirical models for the stopping distance of a car being driven at a range of speeds. Indicates that the calculation of stopping distances makes an excellent example of empirical modeling because it is a situation that is readily understood and particularly relevant to many first-year undergraduates who are learning or…

  10. 15 CFR 710.4 - Overview of scheduled chemicals and examples of affected industries.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... examples of affected industries. 710.4 Section 710.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL... REGULATIONS (CWCR) § 710.4 Overview of scheduled chemicals and examples of affected industries. The following...

  11. Using Framework Analysis in nursing research: a worked example.

    PubMed

    Ward, Deborah J; Furber, Christine; Tierney, Stephanie; Swallow, Veronica

    2013-11-01

    To demonstrate Framework Analysis using a worked example and to illustrate how criticisms of qualitative data analysis including issues of clarity and transparency can be addressed. Critics of the analysis of qualitative data sometimes cite lack of clarity and transparency about analytical procedures; this can deter nurse researchers from undertaking qualitative studies. Framework Analysis is flexible, systematic, and rigorous, offering clarity, transparency, an audit trail, an option for theme-based and case-based analysis and for readily retrievable data. This paper offers further explanation of the process undertaken which is illustrated with a worked example. Data were collected from 31 nursing students in 2009 using semi-structured interviews. The data collected are not reported directly here but used as a worked example for the five steps of Framework Analysis. Suggestions are provided to guide researchers through essential steps in undertaking Framework Analysis. The benefits and limitations of Framework Analysis are discussed. Nurses increasingly use qualitative research methods and need to use an analysis approach that offers transparency and rigour which Framework Analysis can provide. Nurse researchers may find the detailed critique of Framework Analysis presented in this paper a useful resource when designing and conducting qualitative studies. Qualitative data analysis presents challenges in relation to the volume and complexity of data obtained and the need to present an 'audit trail' for those using the research findings. Framework Analysis is an appropriate, rigorous and systematic method for undertaking qualitative analysis. © 2013 Blackwell Publishing Ltd.

  12. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  13. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  14. Establishing Ripe Moments for Negotiated Settlement in Counterinsurgency: An Example from Colombia

    DTIC Science & Technology

    2017-05-25

    Rickmeyer Monograph Title : Establishing Ripe Moments for Negotiated Settlement in Counterinsurgency: An Example from Colombia Approved by...Establishing Ripe Moments for Negotiated Settlement in Counterinsurgency: An Example from Colombia A Monograph by MAJ Paul F. Rickmeyer US Army...05-2017 2. REPORT TYPE Mater’s Thesis 3. DATES COVERED (From - To) JUN 2016 – MAY 2017 4. TITLE AND SUBTITLE Establishing Ripe Moments for

  15. Seeking instructional specificity: An example from analogical instruction

    NASA Astrophysics Data System (ADS)

    Kuo, Eric; Wieman, Carl E.

    2015-12-01

    Broad instructional methods like "interactive engagement" have been shown to be effective, but such general characterization provides little guidance on the details of how to structure instructional materials. In this study, we seek instructional specificity by comparing two ways of using an analogy to learn a target physical principle: (i) applying the analogy to the target physical domain on a case-by-case basis and (ii) using the analogy to create a general rule in the target physical domain. In the discussion sections of a large, introductory physics course (N =2 3 1 ), students who sought a general rule were better able to discover and apply a correct physics principle than students who analyzed the examples case by case. The difference persisted at a reduced level after subsequent direct instruction. We argue that students who performed case-by-case analyses were more likely to focus on idiosyncratic problem-specific features rather than the deep structural features. This study provides an example of investigations into how the specific structure of instructional materials can be consequential for what is learned.

  16. [Effects decomposition in mediation analysis: a numerical example].

    PubMed

    Zugna, Daniela; Richiardi, Lorenzo

    2018-01-01

    Mediation analysis aims to decompose the total effect of the exposure on the outcome into a direct effect (unmediated) and an indirect effect (mediated by a mediator). When the interest also lies on understanding whether the exposure effect differs in different sub-groups of study population or under different scenarios, the mediation analysis needs to be integrated with interaction analysis. In this setting it is necessary to decompose the total effect not only into two components, the direct and indirect effects, but other two components linked to interaction. The interaction between the exposure and the mediator in their effect on the outcome could indeed act through the effect of the exposure on the mediator or through the mediator when the mediator is not totally explained by the exposure. We describe options for decomposition, proposed in literature, of the total effect and we illustrate them through a hypothetical example of the effect of age at diagnosis of cancer on survival, mediated and unmediated by the therapeutical approach, and a numerical example.

  17. Inter-disciplinarity in sport sciences: The neuroscience example.

    PubMed

    Fargier, Patrick; Collet, Christian; Moran, Aidan; Massarelli, Raphaël

    2017-02-01

    Sport science is a relatively recent domain of research born from the interactions of different disciplines related to sport. According to the European College of sport science ( http://sport-science.org ): "scientific excellence in sport science is based on disciplinary competence embedded in the understanding that its essence lies in its multi- and interdisciplinary character". In this respect, the scientific domain of neuroscience has been developed within such a framework. Influenced by the apparent homogeneity of this scientific domain, the present paper reviews three important research topics in sport from a neuroscientific perspective. These topics concern the relationship between mind and motor action, the effects of cognition on motor performance, and the study of certain mental states (such as the "flow" effect, see below) and motor control issues to understand, for example, the neural substrates of the vertical squat jump. Based on the few extensive examples shown in this review, we argue that by adopting an interdisciplinary paradigm, sport science can emulate neuroscience in becoming a mono-discipline.

  18. Effectively identifying compound-protein interactions by learning from positive and unlabeled examples.

    PubMed

    Cheng, Zhanzhan; Zhou, Shuigeng; Wang, Yang; Liu, Hui; Guan, Jihong; Chen, Yi-Ping Phoebe

    2016-05-18

    Prediction of compound-protein interactions (CPIs) is to find new compound-protein pairs where a protein is targeted by at least a compound, which is a crucial step in new drug design. Currently, a number of machine learning based methods have been developed to predict new CPIs in the literature. However, as there is not yet any publicly available set of validated negative CPIs, most existing machine learning based approaches use the unknown interactions (not validated CPIs) selected randomly as the negative examples to train classifiers for predicting new CPIs. Obviously, this is not quite reasonable and unavoidably impacts the CPI prediction performance. In this paper, we simply take the unknown CPIs as unlabeled examples, and propose a new method called PUCPI (the abbreviation of PU learning for Compound-Protein Interaction identification) that employs biased-SVM (Support Vector Machine) to predict CPIs using only positive and unlabeled examples. PU learning is a class of learning methods that leans from positive and unlabeled (PU) samples. To the best of our knowledge, this is the first work that identifies CPIs using only positive and unlabeled examples. We first collect known CPIs as positive examples and then randomly select compound-protein pairs not in the positive set as unlabeled examples. For each CPI/compound-protein pair, we extract protein domains as protein features and compound substructures as chemical features, then take the tensor product of the corresponding compound features and protein features as the feature vector of the CPI/compound-protein pair. After that, biased-SVM is employed to train classifiers on different datasets of CPIs and compound-protein pairs. Experiments over various datasets show that our method outperforms six typical classifiers, including random forest, L1- and L2-regularized logistic regression, naive Bayes, SVM and k-nearest neighbor (kNN), and three types of existing CPI prediction models. Source code, datasets and

  19. Grain-Size Based Additivity Models for Scaling Multi-rate Uranyl Surface Complexation in Subsurface Sediments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Xiaoying; Liu, Chongxuan; Hu, Bill X.

    This study statistically analyzed a grain-size based additivity model that has been proposed to scale reaction rates and parameters from laboratory to field. The additivity model assumed that reaction properties in a sediment including surface area, reactive site concentration, reaction rate, and extent can be predicted from field-scale grain size distribution by linearly adding reaction properties for individual grain size fractions. This study focused on the statistical analysis of the additivity model with respect to reaction rate constants using multi-rate uranyl (U(VI)) surface complexation reactions in a contaminated sediment as an example. Experimental data of rate-limited U(VI) desorption in amore » stirred flow-cell reactor were used to estimate the statistical properties of multi-rate parameters for individual grain size fractions. The statistical properties of the rate constants for the individual grain size fractions were then used to analyze the statistical properties of the additivity model to predict rate-limited U(VI) desorption in the composite sediment, and to evaluate the relative importance of individual grain size fractions to the overall U(VI) desorption. The result indicated that the additivity model provided a good prediction of the U(VI) desorption in the composite sediment. However, the rate constants were not directly scalable using the additivity model, and U(VI) desorption in individual grain size fractions have to be simulated in order to apply the additivity model. An approximate additivity model for directly scaling rate constants was subsequently proposed and evaluated. The result found that the approximate model provided a good prediction of the experimental results within statistical uncertainty. This study also found that a gravel size fraction (2-8mm), which is often ignored in modeling U(VI) sorption and desorption, is statistically significant to the U(VI) desorption in the sediment.« less

  20. The mechanical problems on additive manufacturing of viscoelastic solids with integral conditions on a surface increasing in the growth process

    NASA Astrophysics Data System (ADS)

    Parshin, D. A.; Manzhirov, A. V.

    2018-04-01

    Quasistatic mechanical problems on additive manufacturing aging viscoelastic solids are investigated. The processes of piecewise-continuous accretion of such solids are considered. The consideration is carried out in the framework of linear mechanics of growing solids. A theorem about commutativity of the integration over an arbitrary surface increasing in the solid growing process and the time-derived integral operator of viscoelasticity with a limit depending on the solid point is proved. This theorem provides an efficient way to construct on the basis of Saint-Venant principle solutions of nonclassical boundary-value problems for describing the mechanical behaviour of additively formed solids with integral satisfaction of boundary conditions on the surfaces expanding due to the additional material influx to the formed solid. The constructed solutions will retrace the evolution of the stress-strain state of the solids under consideration during and after the processes of their additive formation. An example of applying the proved theorem is given.

  1. Examples of Mathematical Modeling

    PubMed Central

    Johnston, Matthew D.; Edwards, Carina M.; Bodmer, Walter F.; Maini, Philip K.; Chapman, S. Jonathan

    2008-01-01

    Mathematical modeling is being increasingly recognized within the biomedical sciences as an important tool that can aid the understanding of biological systems. The heavily regulated cell renewal cycle in the colonic crypt provides a good example of how modeling can be used to find out key features of the system kinetics, and help to explain both the breakdown of homeostasis and the initiation of tumorigenesis. We use the cell population model by Johnston et al.5 to illustrate the power of mathematical modeling by considering two key questions about the cell population dynamics in the colonic crypt. We ask: how can a model describe both homeostasis and unregulated growth in tumorigenesis; and to which parameters in the system is the model most sensitive? In order to address these questions, we discuss what type of modeling approach is most appropriate in the crypt. We use the model to argue why tumorigenesis is observed to occur in stages with long lag phases between periods of rapid growth, and we identify the key parameters. PMID:17873520

  2. 55. VIEW OF ROASTER ADDITION FROM NORTH. ELEVATOR/ORE BIN ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    55. VIEW OF ROASTER ADDITION FROM NORTH. ELEVATOR/ORE BIN ADDITION TO RIGHT (WEST) WITH BAKER COOLER IN FRONT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  3. Nanostructures in n-Octanol Equilibrated with Additives and/or Water.

    PubMed

    Cevc, Gregor; Berts, Ida; Fischer, Stefan F; Rädler, Joachim O; Nickel, Bert

    2018-05-29

    Fluid fatty alcohols are believed to be nanostructured but broadly amorphous (i.e., noncrystalline) fluids and solvents, including the most popular fatty tissue mimetic, hydrated n-octanol (i.e., hydro-octanol). To check this premise, we studied dry octanol and hydro-octanol as a model of relatively short fluid n-alkanols with small-angle X-ray scattering (SAXS). We also combined this alkanol with the matching alkane (i.e., octane) and with a common anti-inflammatory pain killer (ketoprofen). This revealed that (hydro-)octanol and arguably any other short fatty alcohol form a mesophase. Its basic structural motif are regularly packed polar nanoclusters, reflected in the inner peak in the SAXS diffractogram of (hydro-)octanol and other fluid n-alkanols. The nanoclusters arguably resemble tiny, (inverse) hydrated bilayer fragments, located on a thermally smeared para-crystalline lattice. Additives to hydro-octanol can change the nanoclusters only moderately, if at all. For example, octane and the drug ketoprofen added to hydro-octanol enlarge the nanoclusters only little because of the mixture's packing frustration. To associate with and to bring more water into hydro-octanol, an additive must hence transform the nanoclusters: it expands them into irregularly distributed aqueous lacunae that form a proto-microemulsion, reflected in the previously unknown Guinier's SAXS signal. A "weak" (i.e., a weakly polar or nonpolar) additive can moreover create only size-limited lacunae. Coexistence of nanoclusters and lacunae as well as size variability of the latter in hydro-octanol subvert the concept of octanol-water partition coefficient, which relies on the studied compartment homogeneity. In turn, it opens new possibilities for interfacial catalysis. Reinterpreting "octanol-water partition coefficient" data in terms of octanol-water association or binding constant(s) could furthermore diminish the variability of molecular lipophilicity description and pave the ground

  4. Polylactides in additive biomanufacturing.

    PubMed

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Acquisition of Visual Perceptual Skills from Worked Examples: Learning to Interpret Electrocardiograms (ECGs)

    ERIC Educational Resources Information Center

    van den Berge, Kees; van Gog, Tamara; Mamede, Silvia; Schmidt, Henk G.; van Saase, Jan L. C. M.; Rikers, Remy M. J. P.

    2013-01-01

    Research has shown that for acquiring problem-solving skills, instruction consisting of studying worked examples is more effective and efficient for novice learners than instruction consisting of problem-solving. This study investigated whether worked examples would also be a useful instructional format for the acquisition of visual perceptual…

  6. Microfluidics-Enabled Diagnostic Systems: Markets, Challenges, and Examples.

    PubMed

    Becker, Holger; Gärtner, Claudia

    2017-01-01

    Microfluidics has become an important tool for the commercial product development in diagnostics. This article will focus on current technical demands during the development process such as material and integration challenges. Furthermore, we present data on the diagnostics market as well as examples of microfluidics-enabled systems currently under commercial development or already on the market.

  7. Generating and Using Examples in the Proving Process

    ERIC Educational Resources Information Center

    Sandefur, J.; Mason, J.; Stylianides, G. J.; Watson, A.

    2013-01-01

    We report on our analysis of data from a dataset of 26 videotapes of university students working in groups of 2 and 3 on different proving problems. Our aim is to understand the role of example generation in the proving process, focusing on deliberate changes in representation and symbol manipulation. We suggest and illustrate four aspects of…

  8. Paradigms: examples from the bacterium Xylella fastidiosa.

    PubMed

    Purcell, Alexander

    2013-01-01

    The history of advances in research on Xylella fastidiosa provides excellent examples of how paradigms both advance and limit our scientific understanding of plant pathogens and the plant diseases they cause. I describe this from a personal perspective, having been directly involved with many persons who made paradigm-changing discoveries, beginning with the discovery that a bacterium, not a virus, causes Pierce's disease of grape and other plant diseases in numerous plant species, including important crop and forest species.

  9. Magnetic force and work: an accessible example

    NASA Astrophysics Data System (ADS)

    Gates, Joshua

    2014-05-01

    Despite their physics instructors’ arguments to the contrary, introductory students can observe situations in which there seems to be compelling evidence for magnetic force doing work. The counterarguments are often highly technical and require physics knowledge beyond the experience of novice students, however. A simple example is presented which can illustrate that all may not be what it seems when energy transfer and the magnetic force are involved. Excel and Python simulations of the process are also provided.

  10. Periodicity and chaos from switched flow systems - Contrasting examples of discretely controlled continuous systems

    NASA Technical Reports Server (NTRS)

    Chase, Christopher; Serrano, Joseph; Ramadge, Peter J.

    1993-01-01

    We analyze two examples of the discrete control of a continuous variable system. These examples exhibit what may be regarded as the two extremes of complexity of the closed-loop behavior: one is eventually periodic, the other is chaotic. Our examples are derived from sampled deterministic flow models. These are of interest in their own right but have also been used as models for certain aspects of manufacturing systems. In each case, we give a precise characterization of the closed-loop behavior.

  11. Example of a Bayes network of relations among visual features

    NASA Astrophysics Data System (ADS)

    Agosta, John M.

    1991-10-01

    Bayes probability networks, also termed `influence diagrams,' promise to be a versatile, rigorous, and expressive uncertainty reasoning tool. This paper presents an example of how a Bayes network can express constraints among visual hypotheses. An example is presented of a model composed of cylindric primitives, inferred from a line drawing of a plumbing fixture. Conflict between interpretations of candidate cylinders is expressed by two parameters, one for the presence and one for the absence of visual evidence of their intersection. It is shown how `partial exclusion' relations are so generated and how they determine the degree of competition among the set of hypotheses. Solving this network obtains the assemblies of cylinders most likely to form an object.

  12. Compound flooding: examples, methods, and challenges

    NASA Astrophysics Data System (ADS)

    Wahl, T.

    2017-12-01

    When different climatic extremes occur simultaneously or in close succession, the impacts to the environment, built infrastructure and society at large are often significantly escalated. These events are collectively referred to as "compound" events. Although they are typically regarded as highly "surprising" when they occur, the dependencies and multi-scale nature of many climate phenomena mean that such events occur much more likely than might be expected by random chance alone. However, despite their high impacts, compound extremes are not, or only poorly covered in current risk analysis frameworks and policy agendas. Floods in particular, which are among the most dangerous and costly natural hazards, are rarely a function of just one driver. Rather, they often arise through the joint occurrence of different source mechanisms. This can include oceanographic drivers such as tides, storm surges, or waves, as well as hydrologic drivers such as rainfall runoff (pluvial) or river discharge (fluvial). Often, two or more of these flood drivers affect the same region and are correlated with each other, which needs to be accounted for in flood risk assessments. This presentation will briefly introduce the different types of compound flooding along with recent examples from around the globe where those high impact events led to substantial damages and loss of lives. A broad overview will be provided of existing statistical modelling tools to identify and simulate dependencies between flood drivers, for example when calculating joint probabilities. Finally, some of the most pressing challenges in developing improved strategies to assess and mitigate the risks of climatic compound extremes, and compound flooding in particular, will be discussed.

  13. Enhancing current-induced torques by abutting additional spin polarizer layer to nonmagnetic metal layer

    NASA Astrophysics Data System (ADS)

    Go, Gyungchoon; Lee, Kyung-Jin; Kim, Young Keun

    2017-04-01

    Recently, the switching of a perpendicularly magnetized ferromagnet (FM) by injecting an in-plane current into an attached non-magnet (NM) has become of emerging technological interest. This magnetization switching is attributed to the spin-orbit torque (SOT) originating from the strong spin-orbit coupling of the NM layer. However, the switching efficiency of the NM/FM structure itself may be insufficient for practical use, as for example, in spin transfer torque (STT)-based magnetic random access memory (MRAM) devices. Here we investigate spin torque in an NM/FM structure with an additional spin polarizer (SP) layer abutted to the NM layer. In addition to the SOT contribution, a spin-polarized current from the SP layer creates an extra spin chemical potential difference at the NM/FM interface and gives rise to a STT on the FM layer. We show that, using typical parameters including device width, thickness, spin diffusion length, and the spin Hall angle, the spin torque from the SP layer can be much larger than that from the spin Hall effect (SHE) of the NM.

  14. New Caledonia a classic example of an arc continent collision

    NASA Astrophysics Data System (ADS)

    Aitchison, J.

    2011-12-01

    The SW Pacific island of New Caledonia presents a classic example of an arc-continent collision. This event occurred in the Late Eocene when elements of an intra-oceanic island arc system, the Loyalty-D'Entrecasteaux arc, which stretched SSE from near Papua New Guinea east of New Caledonia to offshore New Zealand, collided with micro-continental fragments that had rifted off eastern Gondwana (Australia) in the late Cretaceous. Intervening Late Cretaceous to Paleogene oceanic crust of the South Loyalty Basin was eliminated through eastward subduction beneath this west-facing intra-oceanic island arc. As with many arc-continent collisions elsewhere collision was accompanied by ophiolite emplacement. The erosional remnants of which are extensive in New Caledonia. Collision led to subduction flip, followed by extensive rollback in front of the newly established east-facing Vitiaz arc. Post-collisional magmatism occurred after slab break-off and is represented by small-scale granitoid intrusions. Additional important features of New Caledonia include the presence of a regionally extensive UHP metamorphic terrain consisting of blueschists and eclogites that formed during the subduction process and were rapidly exhumed as a result of the collision Not only was collision and associated orogeny short-lived this collision system has not been overprinted by any major subsequent collision. New Caledonia thus provides an exceptional location for the study of processes related to arc-continent collision in general.

  15. Task-oriented display design - Concept and example

    NASA Technical Reports Server (NTRS)

    Abbott, Terence S.

    1989-01-01

    The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

  16. Task-oriented display design: Concept and example

    NASA Technical Reports Server (NTRS)

    Abbott, Terence S.

    1989-01-01

    The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

  17. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  18. 47 CFR Figure 3 to Subpart N of... - Example of Ideal EPIRB Spectrum

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Example of Ideal EPIRB Spectrum 3 Figure 3 to Subpart N of Part 2 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND... Position Indicating Radiobeacons (EPIRBs) Pt. 2, Subpt. N, Fig. 3 Figure 3 to Subpart N of Part 2—Example...

  19. 47 CFR Figure 3 to Subpart N of... - Example of Ideal EPIRB Spectrum

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Example of Ideal EPIRB Spectrum 3 Figure 3 to Subpart N of Part 2 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND... Position Indicating Radiobeacons (EPIRBs) Pt. 2, Subpt. N, Fig. 3 Figure 3 to Subpart N of Part 2—Example...

  20. Performance Assessment Examples from the Quality Performance Assessment Network

    ERIC Educational Resources Information Center

    Kuriacose, Christina

    2017-01-01

    In this brief article, Christina Kuriacose provides four sample performance assessments. Spanning grade levels, these assessments are strong examples of teacher-developed performance assessments from schools within the Center for Collaborative Education's Quality Performance Assessment network. These performance tasks demonstrate the pedagogical…

  1. Estimating the Economic Value of Information for Screening in Disseminating and Targeting Effective School-based Preventive Interventions: An Illustrative Example.

    PubMed

    Johnston, Stephen S; Salkever, David S; Ialongo, Nicholas S; Slade, Eric P; Stuart, Elizabeth A

    2017-11-01

    When candidates for school-based preventive interventions are heterogeneous in their risk of poor outcomes, an intervention's expected economic net benefits may be maximized by targeting candidates for whom the intervention is most likely to yield benefits, such as those at high risk of poor outcomes. Although increasing amounts of information about candidates may facilitate more accurate targeting, collecting information can be costly. We present an illustrative example to show how cost-benefit analysis results from effective intervention demonstrations can help us to assess whether improved targeting accuracy justifies the cost of collecting additional information needed to make this improvement.

  2. Episodic Memory Does Not Add Up: Verbatim-Gist Superposition Predicts Violations of the Additive Law of Probability

    PubMed Central

    Brainerd, C. J.; Wang, Zheng; Reyna, Valerie. F.; Nakamura, K.

    2015-01-01

    Fuzzy-trace theory’s assumptions about memory representation are cognitive examples of the familiar superposition property of physical quantum systems. When those assumptions are implemented in a formal quantum model (QEMc), they predict that episodic memory will violate the additive law of probability: If memory is tested for a partition of an item’s possible episodic states, the individual probabilities of remembering the item as belonging to each state must sum to more than 1. We detected this phenomenon using two standard designs, item false memory and source false memory. The quantum implementation of fuzzy-trace theory also predicts that violations of the additive law will vary in strength as a function of reliance on gist memory. That prediction, too, was confirmed via a series of manipulations (e.g., semantic relatedness, testing delay) that are thought to increase gist reliance. Surprisingly, an analysis of the underlying structure of violations of the additive law revealed that as a general rule, increases in remembering correct episodic states do not produce commensurate reductions in remembering incorrect states. PMID:26236091

  3. Additional support for the TDK/MABL computer program

    NASA Technical Reports Server (NTRS)

    Nickerson, G. R.; Dunn, Stuart S.

    1993-01-01

    An advanced version of the Two-Dimensional Kinetics (TDK) computer program was developed under contract and released to the propulsion community in early 1989. Exposure of the code to this community indicated a need for improvements in certain areas. In particular, the TDK code needed to be adapted to the special requirements imposed by the Space Transportation Main Engine (STME) development program. This engine utilizes injection of the gas generator exhaust into the primary nozzle by means of a set of slots. The subsequent mixing of this secondary stream with the primary stream with finite rate chemical reaction can have a major impact on the engine performance and the thermal protection of the nozzle wall. In attempting to calculate this reacting boundary layer problem, the Mass Addition Boundary Layer (MABL) module of TDK was found to be deficient in several respects. For example, when finite rate chemistry was used to determine gas properties, (MABL-K option) the program run times became excessive because extremely small step sizes were required to maintain numerical stability. A robust solution algorithm was required so that the MABL-K option could be viable as a rocket propulsion industry design tool. Solving this problem was a primary goal of the phase 1 work effort.

  4. 25 CFR 309.16 - What are examples of regalia that are Indian products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of regalia that are Indian products? 309.16 Section 309.16 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.16 What are examples of regalia that are Indian products? (a...

  5. 25 CFR 309.11 - What are examples of jewelry that are Indian products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of jewelry that are Indian products? 309.11 Section 309.11 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.11 What are examples of jewelry that are Indian products? (a...

  6. 25 CFR 309.15 - What are examples of apparel that are Indian products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of apparel that are Indian products? 309.15 Section 309.15 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.15 What are examples of apparel that are Indian products? (a...

  7. 25 CFR 309.17 - What are examples of woodwork that are Indian products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of woodwork that are Indian products? 309.17 Section 309.17 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.17 What are examples of woodwork that are Indian products? (a...

  8. 25 CFR 309.15 - What are examples of apparel that are Indian products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of apparel that are Indian products? 309.15 Section 309.15 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.15 What are examples of apparel that are Indian products? (a...

  9. 25 CFR 309.11 - What are examples of jewelry that are Indian products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of jewelry that are Indian products? 309.11 Section 309.11 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.11 What are examples of jewelry that are Indian products? (a...

  10. 25 CFR 309.17 - What are examples of woodwork that are Indian products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of woodwork that are Indian products? 309.17 Section 309.17 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.17 What are examples of woodwork that are Indian products? (a...

  11. 25 CFR 309.16 - What are examples of regalia that are Indian products?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of regalia that are Indian products? 309.16 Section 309.16 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.16 What are examples of regalia that are Indian products? (a...

  12. Defence reactions of plants to fungal pathogens: principles and perspectives, using powdery mildew on cereals as an example

    NASA Astrophysics Data System (ADS)

    Heitefuss, Rudolf

    2001-06-01

    Diseases of crop plants may lead to considerable yield losses. To control fungal diseases, fungicides are used extensively in present-day agricultural production. In order to reduce such external inputs, cultivars with natural resistance to important fungal pathogens are recommended in systems of integrated plant protection. Basic research, including genetics and molecular methods, is required to elucidate the mechanisms by which plants react to an attack by fungal pathogens and successfully defend themselves. This review examines our knowledge with respect to the multicomponent systems of resistance in plants, using powdery mildew on barley as an example. In addition, the question is adressed whether systemic acquired resistance and plants with transgenic resistance may be utilized in future plant protection strategies.

  13. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

  14. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

  15. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

  16. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

  17. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Additives. 79.31 Section 79.31... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives... persons or property on a street or highway. For purposes of this registration, however, additives...

  18. How Effective Is Example Generation for Learning Declarative Concepts?

    ERIC Educational Resources Information Center

    Rawson, Katherine A.; Dunlosky, John

    2016-01-01

    Declarative concepts (i.e., key terms and corresponding definitions for abstract concepts) represent foundational knowledge that students learn in many content domains. Thus, investigating techniques to enhance concept learning is of critical importance. Various theoretical accounts support the expectation that example generation will serve this…

  19. 78 FR 68779 - Controlled Group Regulation Examples; Hearing Cancellation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-15

    ..., no one has requested to speak. Therefore, the public hearing scheduled for December 9, 2013, is.... ACTION: Cancellation of a notice of public hearing on proposed rulemaking. SUMMARY: This document cancels a public hearing on proposed regulations that propose revisions to examples that illustrate the...

  20. Example MODIS Global Cloud Optical and Microphysical Properties: Comparisons between Terra and Aqua

    NASA Technical Reports Server (NTRS)

    Hubanks, P. A.; Platnick, S.; King, M. D.; Ackerman, S. A.; Frey, R. A.

    2003-01-01

    MODIS observations from the NASA EOS Terra spacecraft (launched in December 1999, 1030 local time equatorial crossing) have provided a unique data set of Earth observations. With the launch of the NASA Aqua spacecraft in May 2002 (1330 local time), two MODIS daytime (sunlit) and nighttime observations are now available in a 24 hour period, allowing for some measure of diurnal variability. We report on an initial analysis of several operational global (Level-3) cloud products from the two platforms. The MODIS atmosphere Level-3 products, which include clear-sky and aerosol products in addition to cloud products, are available as three separate files providing daily, eight-day, and monthly aggregations; each temporal aggregation is spatially aggregated to a 1 degree grid. The files contain approximately 600 statisitical datasets (from simple means and standard deviations to 1 - and 2-dimensional histograms). Operational cloud products include detection (cloud fraction), cloud-top properties, and daytimeonly cloud optical thickness and particle effective radius for both water and ice clouds. We will compare example global Terra and Aqua cloud fraction, optical thickness, and effective radius aggregations.