Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature

NASA Astrophysics Data System (ADS)

Panicker, Sudhy S.; Singh, Har Govind; Panda, Sushanta Kumar; Dashwood, Richard

2015-11-01

Automotive industries are very much interested in characterization of formability improvement of aluminum alloys at elevated temperatures before designing tools, heating systems, and processing sequences for fabrication of auto-body panels by warm forming technology. In this study, tensile tests of AA5754-H22 aluminum alloy were carried out at five different temperatures and three different strain rates to investigate the deformation behavior correlating with Cowper-Symonds constitutive equation. Laboratory scale warm forming facilities were designed and fabricated to perform limiting dome height and deep drawing tests to evaluate forming limit strains and drawability of sheet metal at different tool temperatures. The forming limit strain and dome height improved significantly when both the die and punch were heated to 200 °C. Remarkable improvement in deep drawn cup depth was observed when die and punch temperatures were maintained at 200 and 30 °C, respectively, producing a non-isothermal temperature gradient of approximately 93 °C across the blank from flange to center. The forming behavior at different isothermal and non-isothermal conditions were predicted successfully using a thermo-mechanical FE model incorporating temperature-dependent properties in Barlat-89 yield criterion coupled with Cowper-Symonds hardening model, and the thinning/failure location in deformed cups were validated implementing the experimental limiting strains as damage model.

Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys

NASA Astrophysics Data System (ADS)

Bae, Jae Wung; Moon, Jongun; Jang, Min Ji; Ahn, Dong-Hyun; Joo, Soo-Hyun; Jung, Jaimyun; Yim, Dami; Kim, Hyoung Seop

2017-09-01

Herein, the deep drawability and deep drawing behavior of an equiatomic CoCrFeMnNi HEA and its microstructure and texture evolution are first studied for future applications. The CoCrFeMnNi HEA is successfully drawn to a limit drawing ratio (LDR) of 2.14, while the planar anisotropy of the drawn cup specimen is negligible. The moderate combination of strain hardening exponent and strain rate sensitivity and the formation of deformation twins in the edge region play important roles in successful deep drawing. In the meanwhile, the texture evolution of CoCrFeMnNi HEA has similarities with conventional fcc metals.

Assessing the Linguistic Productivity of Unsupervised Deep Neural Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, Lawrence A.; Hodas, Nathan O.

Increasingly, cognitive scientists have demonstrated interest in applying tools from deep learning. One use for deep learning is in language acquisition where it is useful to know if a linguistic phenomenon can be learned through domain-general means. To assess whether unsupervised deep learning is appropriate, we first pose a smaller question: Can unsupervised neural networks apply linguistic rules productively, using them in novel situations. We draw from the literature on determiner/noun productivity by training an unsupervised, autoencoder network measuring its ability to combine nouns with determiners. Our simple autoencoder creates combinations it has not previously encountered, displaying a degree ofmore » overlap similar to actual children. While this preliminary work does not provide conclusive evidence for productivity, it warrants further investigation with more complex models. Further, this work helps lay the foundations for future collaboration between the deep learning and cognitive science communities.« less

Enhancing observation by drawing: Alveolinids models by Manfred Reichel (1896-1984)

NASA Astrophysics Data System (ADS)

Leria, Maria

2017-04-01

Graphic representation is a fundamental tool in morphological studies, as paleontology. A paradigmatic example is the alveolinid drawings of Prof. Manfred Reichel (1896-1984). Thanks to these drawings his research on foraminifera, had an important impact on micropaleontology. Manfred Reichel studied Fine Arts, but later he began a scientific career on biological sciences and becoming a professor in micropaleontology, at the Geological and Paleontological Institute of the University of Basel, Switzerland. His background in art had a benefit in his scientific production, especially with the extremely complex foraminiferal structures. By means of illustrations, inspired by the French naturalists, he was able to solve the most complex internal architecture of forams. His drawings display foraminifera's internal 3D structure in such a comprehensible way that has not been improved using modern techniques. His work has been used by different generations of paleontologist to understand the internal architecture of forams and are still used today. The aim of this study is to analyze the process that Reichel followed to create some of his most representative drawings. This study is based on the examination of a selection of Reichel's drawings (n>40) held at the Natural History Museum in Basel. In addition, his family and students have been interviewed supplying useful information to understand how he applied his artistic skills to teach and research. This study illustrates the steps followed by Reichel in the creation of a drawing of alveolinid. The process represents the transformation of the morphological data from 2D images (polished rock sections) into a comprehensible 3D image. A description of the process of observation, comparison, sketches and studies, concluding with the final three-dimensional drawing is shown. The results show that that the classical convention in drawing is still and irreplaceable tool in natural sciences, because it allows to define aspects that cannot be equally appreciated shown by other means (text or photography). Drawing it can also be a scientific analytical tool with an artistic identity, we present an example where rigor is intrinsically linked to a high sensibility, and a deep knowledge of drawing that brings as a result a beautiful piece of art.

Determination of Process Parameters in Multi-Stage Hydro-Mechanical Deep Drawing by FE Simulation

NASA Astrophysics Data System (ADS)

Kumar, D. Ravi; Manohar, M.

2017-09-01

In this work, analysis has been carried to simulate manufacturing of a near hemispherical bottom part with large depth by hydro-mechanical deep drawing with an aim to reduce the number of forming steps and to reduce the extent of thinning in the dome region. Inconel 718 has been considered as the material due to its importance in aerospace industry. It is a Ni-based super alloy and it is one of the most widely used of all super alloys primarily due to large-scale applications in aircraft engines. Using Finite Element Method (FEM), numerical simulations have been carried out for multi-stage hydro-mechanical deep drawing by using the same draw ratios and design parameters as in the case of conventional deep drawing in four stages. The results showed that the minimum thickness in the final part can be increased significantly when compared to conventional deep drawing. It has been found that the part could be deep drawn to the desired height (after trimming at the final stage) without any severe wrinkling. Blank holding force (BHF) and peak counter pressure have been found to have a strong influence on thinning in the component. Decreasing the coefficient of friction has marginally increased the minimum thickness in the final component. By increasing the draw ratio and optimizing BHF, counter pressure and die corner radius in the simulations, it has been found that it is possible to draw the final part in three stages. It has been found that thinning can be further reduced by decreasing the initial blank size without any reduction in the final height. This reduced the draw ratio at every stage and optimum combination of BHF and counter pressure have been found for the 3-stage process also.

Sunspot drawings handwritten character recognition method based on deep learning

NASA Astrophysics Data System (ADS)

Zheng, Sheng; Zeng, Xiangyun; Lin, Ganghua; Zhao, Cui; Feng, Yongli; Tao, Jinping; Zhu, Daoyuan; Xiong, Li

2016-05-01

High accuracy scanned sunspot drawings handwritten characters recognition is an issue of critical importance to analyze sunspots movement and store them in the database. This paper presents a robust deep learning method for scanned sunspot drawings handwritten characters recognition. The convolution neural network (CNN) is one algorithm of deep learning which is truly successful in training of multi-layer network structure. CNN is used to train recognition model of handwritten character images which are extracted from the original sunspot drawings. We demonstrate the advantages of the proposed method on sunspot drawings provided by Chinese Academy Yunnan Observatory and obtain the daily full-disc sunspot numbers and sunspot areas from the sunspot drawings. The experimental results show that the proposed method achieves a high recognition accurate rate.

In-situ-measurement of the friction coefficient in the deep drawing process

NASA Astrophysics Data System (ADS)

Recklin, V.; Dietrich, F.; Groche, P.

2017-09-01

The surface texture plays an important role in the tribological behaviour of deep drawn components. It influences both the process of sheet metal forming as well as the properties for post processing, such as paint appearance, bonding, or corrosion tendency. During the forming process, the texture of the sheet metal and therefore its friction coefficient, changes due to process related strains. This contribution focuses on the development and validation of a tool to investigate the friction coefficient of the flange region of deep drawn components. The influence of biaxial strain on the friction coefficient will be quantified through a comparison of the experimental results with a conventional friction test (stand). The presented method will be applied on a cup drawing test, using a segmented and sensor-monitored blankholder. This setup allows the measurement of the friction coefficient in-situ without simplification of the real process. The experiments were carried out using DX 56D+Z as sheet metal and PL61 as lubricant. The results show a characteristic change in the friction coefficient over the displacement of the punch, which is assumed to be caused by strain induced change of the surface texture.

Google DeepMind and healthcare in an age of algorithms.

PubMed

Powles, Julia; Hodson, Hal

2017-01-01

Data-driven tools and techniques, particularly machine learning methods that underpin artificial intelligence, offer promise in improving healthcare systems and services. One of the companies aspiring to pioneer these advances is DeepMind Technologies Limited, a wholly-owned subsidiary of the Google conglomerate, Alphabet Inc. In 2016, DeepMind announced its first major health project: a collaboration with the Royal Free London NHS Foundation Trust, to assist in the management of acute kidney injury. Initially received with great enthusiasm, the collaboration has suffered from a lack of clarity and openness, with issues of privacy and power emerging as potent challenges as the project has unfolded. Taking the DeepMind-Royal Free case study as its pivot, this article draws a number of lessons on the transfer of population-derived datasets to large private prospectors, identifying critical questions for policy-makers, industry and individuals as healthcare moves into an algorithmic age.

Study the effect of elevated dies temperature on aluminium and steel round deep drawing

NASA Astrophysics Data System (ADS)

Lean, Yeong Wei; Azuddin, M.

2016-02-01

Round deep drawing operation can only be realized by expensive multi-step production processes. To reduce the cost of processes while expecting an acceptable result, round deep drawing can be done at elevated temperature. There are 3 common problems which are fracture, wrinkling and earing of deep drawing a round cup. The main objective is to investigate the effect of dies temperature on aluminium and steel round deep drawing; with a sub-objective of eliminate fracture and reducing wrinkling effect. Experimental method is conducted with 3 different techniques on heating the die. The techniques are heating both upper and lower dies, heating only the upper dies, and heating only the lower dies. 4 different temperatures has been chosen throughout the experiment. The experimental result then will be compared with finite element analysis software. There is a positive result from steel material on heating both upper and lower dies, where the simulation result shows comparable as experimental result. Heating both upper and lower dies will be the best among 3 types of heating techniques.

Investigation of holder pressure and size effects in micro deep drawing of rectangular work pieces driven by piezoelectric actuator.

PubMed

Aminzahed, Iman; Mashhadi, Mahmoud Mosavi; Sereshk, Mohammad Reza Vaziri

2017-02-01

Micro forming is a manufacturing process to fabricate micro parts with high quality and a cost effective manner. Deep drawing could be a favorable method for production of complicated parts in macro and micro sizes. In this paper piezoelectric actuator is used as a novel approach in the field of micro manufacturing. Also, in current work, investigations are conducted with four rectangular punches and blanks with various thicknesses. Blank holder pressure effects on thickness distributions, punch force, and springback are studied. According to the results of this work, increasing of blank holder pressure in scaled deep drawing, in contrast to thickness of drawn part, leads to decrease in the punch forces and springback. Furthermore, it is shown that in micro deep drawing, the effects of holder pressure on mentioned parameters can be ignored. Copyright © 2016 Elsevier B.V. All rights reserved.

Modeling of the minimum variable blank holder force based on forming limit diagram (FLD) in deep drawing process

NASA Astrophysics Data System (ADS)

Candra, S.; Batan, I. M. L.; Berata, W.; Pramono, A. S.

2017-11-01

This paper presents the mathematical approach of minimum blank holder force to prevent wrinkling in deep drawing process of the cylindrical cup. Based on the maximum of minor-major strain ratio, the slab method was applied to determine the modeling of minimum variable blank holder force (VBHF) and it compared to FE simulation. The Tin steel sheet of T4-CA grade, with the thickness of 0.2 mm was used in this study. The modeling of minimum VBHF can be used as a simple reference to prevent wrinkling in deep drawing.

Process Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winklhofer, Johannes; Trattnig, Gernot; Lind, Christoph

Lightweight design is essential for an economic and environmentally friendly vehicle. Aluminium sheet metal is well known for its ability to improve the strength to weight ratio of lightweight structures. One disadvantage of aluminium is that it is less formable than steel. Therefore complex part geometries can only be realized by expensive multi-step production processes. One method for overcoming this disadvantage is deep drawing at elevated temperatures. In this way the formability of aluminium sheet metal can be improved significantly, and the number of necessary production steps can thereby be reduced. This paper introduces deep drawing of aluminium sheet metalmore » at elevated temperatures, a corresponding simulation method, a characteristic process and its optimization. The temperature and strain rate dependent material properties of a 5xxx series alloy and their modelling are discussed. A three dimensional thermomechanically coupled finite element deep drawing simulation model and its validation are presented. Based on the validated simulation model an optimised process strategy regarding formability, time and cost is introduced.« less

Numerical Simulation of Hydro-mechanical Deep Drawing — A Study on the Effect of Process Parameters on Drawability and Thickness Variation

NASA Astrophysics Data System (ADS)

Singh, Swadesh Kumar; Kumar, D. Ravi

2005-08-01

Hydro-mechanical deep drawing is a process for producing cup shaped parts with the assistance of a pressurized fluid. In the present work, numerical simulation of the conventional and counter pressure deep drawing processes has been done with the help of a finite element method based software. Simulation results were analyzed to study the improvement in drawability by using hydro-mechanical processes. The thickness variations in the drawn cups were analyzed and also the effect of counter pressure and oil gap on the thickness distribution was studied. Numerical simulations were also used for the die design, which combines both drawing and ironing processes in a single operation. This modification in the die provides high drawability, facilitates smooth material flow, gives more uniform thickness distribution and corrects the shape distortion.

5. INTERIOR VIEW OF BASEMENT, LOOKING WEST. DEEP DRAW, HEAVY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INTERIOR VIEW OF BASEMENT, LOOKING WEST. DEEP DRAW, HEAVY PRESS MANUFACTURED BY E. W. BLISS CO., BROOKLYN, NEW YORK. PRESS #3-3/4 S, PATENTED BY E. W. BLISS CO., AUGUST 16, 1892, AND JANUARY 31, 1893. THIS PRESS DATES FROM CA. 1920. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Studies in Cup Drawing Behavior of Polymer Laminated Sheet Metal

NASA Astrophysics Data System (ADS)

Elnagmi, M.; Jain, M.; Bruhis, M.; Nielsen, K.

2011-08-01

Axisymmetric deep drawing behavior of a polymer laminated sheet metal (PLSM) is investigated using an axisymmetric cup drawing test. PLSMs are of interest as a replacement for painted finishes for automotive applications as they have the potential to achieve good quality long lasting and aesthetically appealing surfaces on stamped parts. However, there is limited understanding of PLSMs in automotive deep drawing situations to produce complex 3-D parts. The tests are carried out using well-controlled, laboratory-based, dual-action, servo-hydraulic forming presses under blank-holder force and punch displacement control conditions. An optical strain mapping system is used to measure the surface strains (and to construct 3D strain maps) from the film side of the deformed samples for a range of forming conditions. Deep drawing characteristics such as punch load versus punch displacement traces, strain distribution along the cup profile, flange wrinkling and fracture characteristics are experimentally assessed for stainless steel-plastic film laminated sheet materials. Also the effect of lamination pressure on wrinkling and delamination is investigated for a decorative pressure sensitive adhesive film affixed to the stainless steel sheet.

A Fundamental Study of Stretch-Drawing Process of Sheet Metals : Single and Double Operations

NASA Astrophysics Data System (ADS)

Gotoh, Manabu; Kim, Young-soo; Yamashita, Minoru

1998-05-01

Fundamental and informative data of axisymmetric stretch-drawing of several sheet metals with thichness of 0.7 1.0 mm are presented especially for single and double operations. Very small radius is applied to the die-profile (or -shoulder) in all operations to induce wall-thinning by the effect of bending-under-tension, from which the name `stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by the single and double stretch-drawings from smaller cirlcular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks. From this fact, it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional LDR (=limiting drawing ratio), but the depth of the drawn cup should also be taken into account. Many experimental data about various metals and thicknesses given in this paper offer a valueable information on this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing, it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation. Fracturing is found to occur at the middle section of the wall part or at the die-profile other than at the punch profile common in the usual deep-drawing process. Numerical simulation of the single stretch-drawing process is also performed by use of DYNA-3D code to confirm that a satisfactory prediction especially in the depth of the drawn-cup can be done at least in a practical sense, although this kind of numerical analysis is very difficult because of the severity or localization of deformation around the die profile. The drawn cup of SUS304 among others fractures in a couple of weeks after the operation due to the residual circumferential tensile stress, whereas that of SUS304L does not. In the double stretch-drawing, it is confirmed that very deeper cups can be produced when compared to the usual re-drawing process, which assures typically the usefulness of this operation as a practical process. Fracture often takes place circumferentially or, very peculiarly, even in a spiral mode for SUS304 at the middle of the wall part of the cup.

Tribology and Tool Wear of Hot Dip Galvanized Zinc Magnesium Alloys on Cold Rolled Steel Sheets

NASA Astrophysics Data System (ADS)

Raab, A. E.; Berger, E.; Freudenthaler, J.; Leomann, F.; Walch, C.

2011-05-01

Recently zinc based coatings on cold rolled steel with improved functionality in terms of forming and/or corrosion behaviour have been intensively investigated in the steel industry1,2,3. One of the most promising products are zinc magnesium alloys produced in hot dip galvanizing process. These coatings were already introduced in construction industry a few years ago1. With some modifications the improved properties of the coating are also interesting for automotive industry. In the present work the tribological potential of hot dip galvanized zinc magnesium coatings (HDG/ZM) produced at an industrial line under regular production, was studied in terms of sliding properties, adhesive and abrasive tool wear. First a short introduction into surface morphology of HDG/ZM will be given. For the tribological characterization of the material, which is the main topic of the contribution, different tests were performed on hot dip galvanised zinc magnesium material and results were compared with classic hot dip galvanized zinc coating (HDG/Z). The investigations are mainly based on the strip draw test which allows the determination of the friction coefficient directly by using a constant contact pressure. Deep drawing property was tested by forming model cups. The abrasive tool wear was tested using a standard test for material used in automotive industry. The adhesive tool wear was investigated by characterizing the coating material transferred to the tool in the strip draw test. All performed tests show an improved drawability of HDG/ZM compared to classical HDG/Z reference material. However the most promising difference between HDG/ZM and HDG/Z is that galling was found to be less for HDG/ZM than for HDG/Z. Therefore HDG/ZM is an interesting system not only with respect to corrosion protection but also in terms of tribology and provides clear advantages in formability.

Tribology and Tool Wear of Hot Dip Galvanized Zinc Magnesium Alloys on Cold Rolled Steel Sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raab, A. E.; Berger, E.; Freudenthaler, J.

Recently zinc based coatings on cold rolled steel with improved functionality in terms of forming and/or corrosion behaviour have been intensively investigated in the steel industry. One of the most promising products are zinc magnesium alloys produced in hot dip galvanizing process. These coatings were already introduced in construction industry a few years ago. With some modifications the improved properties of the coating are also interesting for automotive industry. In the present work the tribological potential of hot dip galvanized zinc magnesium coatings (HDG/ZM) produced at an industrial line under regular production, was studied in terms of sliding properties, adhesivemore » and abrasive tool wear.First a short introduction into surface morphology of HDG/ZM will be given. For the tribological characterization of the material, which is the main topic of the contribution, different tests were performed on hot dip galvanised zinc magnesium material and results were compared with classic hot dip galvanized zinc coating (HDG/Z). The investigations are mainly based on the strip draw test which allows the determination of the friction coefficient directly by using a constant contact pressure. Deep drawing property was tested by forming model cups. The abrasive tool wear was tested using a standard test for material used in automotive industry. The adhesive tool wear was investigated by characterizing the coating material transferred to the tool in the strip draw test.All performed tests show an improved drawability of HDG/ZM compared to classical HDG/Z reference material. However the most promising difference between HDG/ZM and HDG/Z is that galling was found to be less for HDG/ZM than for HDG/Z. Therefore HDG/ZM is an interesting system not only with respect to corrosion protection but also in terms of tribology and provides clear advantages in formability.« less

Analysis of earing behaviour in deep drawing of ASS 304 at elevated temperature

NASA Astrophysics Data System (ADS)

Gupta, Amit Kumar; Deole, Aditya; Kotkunde, Nitin; Singh, Swadesh Kumar; jella, Gangadhar

2016-08-01

Earing tendency in a deep drawn cup of circular blanks is one the most prominent characteristics observed due to anisotropy in a metal sheet. Such formation of uneven rim is mainly due to dissimilarity in yield stress as well as Lankford parameter (r- value) in different orientations. In this paper, an analytical function coupled with different yield functions viz., Hill 1948, Barlat 1989 and Barlat Yld 2000-2d has been used to provide an approximation of earing profile. In order to validate the results, material parameters for yield functions and hardening rule have been calibrated for ASS 304 at 250°C and deep drawing experiment is conducted to measure the earing profile. The predicted earing profiles based on analytical results have been validated using experimental earing profile. Based on this analysis, Barlat Yld 2000-2d has been observed to be a well suited yield model for deep drawing of ASS 304, which also confirms the reliability of analytical function for earing profile estimation.

Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test

NASA Astrophysics Data System (ADS)

Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz

2018-05-01

Fuel efficiency requirements demand lightweight construction of vehicle body parts. The usage of advanced high strength steels permits a reduction of sheet thickness while still maintaining the overall strength required for crash safety. However, damage, internal defects (voids, inclusions, micro fractures), microstructural defects (varying grain size distribution, precipitates on grain boundaries, anisotropy) and surface defects (micro fractures, grooves) act as a concentration point for stress and consequently as an initiation point for failure both during deep drawing and in service. Considering damage evolution in the design of car body deep drawing processes allows for a further reduction in material usage and therefore body weight. Preliminary research has shown that a modification of load paths in forming processes can help mitigate the effects of damage on the material. This paper investigates the load paths in Nakajima tests of a DP800 dual phase steel to research damage in deep drawing processes. Investigation is done via a finite element model using experimentally validated material data for a DP800 dual phase steel. Numerical simulation allows for the investigation of load paths with respect to stress states, strain rates and temperature evolution, which cannot be easily observed in physical experiments. Stress triaxiality and the Lode parameter are used to describe the stress states. Their evolution during the Nakajima tests serves as an indicator for damage evolution. The large variety of sheet metal forming specific load paths in Nakajima tests allows a comprehensive evaluation of damage for deep drawing. The results of the numerical simulation conducted in this project and further physical experiments will later be used to calibrate a damage model for simulation of deep drawing processes.

Through the eyes of children: Drawings as an evaluation tool for children's understanding about endangered Mexican primates.

PubMed

Franquesa-Soler, Montserrat; Serio-Silva, Juan Carlos

2017-12-01

This study seeks to understand children's perceptions and knowledge of endangered Mexican primates. The black howler monkey (Alouatta pigra) is a charismatic species endemic to Southern Mexico, Northern Belize, and Guatemala and is a symbol of the region that fosters a sense of local pride. Therefore, it can be considered a flagship species for the forests of Southern Mexico. We evaluated the perception and knowledge that 297 Mexican elementary school children (8-10 years old) have about black howler monkeys. Specifically, we analyzed and categorized drawings made by these children based on gender, geographic context (rural or urban), and residence within or outside of Protected Areas (PAs). Student drawings were categorized into three levels of knowledge (no familiarity, basic knowledge, and sophisticated knowledge). Common misconceptions and important landscape elements for black howler conservation were gathered from these visual representations. Children were largely unfamiliar with black howlers, despite sharing the same geographical location. Knowledge was affected by context and residence, with students living within PAs more aware of black howlers than students living outside of PAs. However, overall the children showed a deep understanding of the current forest conservation situation in Southern Mexico; meaning they could be presenting a shifting baseline syndrome. The study highlights the value of assessing children's drawings as a tool that can be used to help policy makers and educational practitioners in fine-tuning educational, environmental, and marketing programs. More importantly, it is a methodology that can be applied in future research for understanding children's perceptions and knowledge about endangered species and environmental change in deciding how to improve the effectiveness of conservation messaging. © 2017 Wiley Periodicals, Inc.

Using Drawing Technology to Assess Students' Visualizations of Chemical Reaction Processes

ERIC Educational Resources Information Center

Chang, Hsin-Yi; Quintana, Chris; Krajcik, Joseph

2014-01-01

In this study, we investigated how students used a drawing tool to visualize their ideas of chemical reaction processes. We interviewed 30 students using thinking-aloud and retrospective methods and provided them with a drawing tool. We identified four types of connections the students made as they used the tool: drawing on existing knowledge,…

Effects of hypnosis and level of processing on repeated recall of line drawings.

PubMed

McKelvie, S J; Pullara, M

1988-07-01

Moderately susceptible subjects (N = 30) initially judged 30 line drawings of objects for pleasantness (deep processing) and 30 line drawings for visual complexity (shallow processing), after which they were given two immediate recall tests. Following a 48-hr delay, subjects were allocated randomly to hypnosis, simulation, or neutral control conditions and were tested four more times. Subjects produced more correct and incorrect responses over the six trials and gave a higher number of correct responses for deep items than for shallow items. Over the last four trials, hypnosis had no general facilitative effect relative to the other two treatments, but the effect of depth was strongest for hypnotized subjects, who recalled more deep items than did the controls. Finally, both hypnotized and simulating subjects rated their recall as more involuntary and their experimental treatment as more helpful than did the controls. Caution is urged in the forensic use of hypnosis as a retrieval device.

Experimental and Numerical Studies on Isothermal and Non-isothermal Deep Drawing of IS 513 CR3 Steel Sheets

NASA Astrophysics Data System (ADS)

Mayavan, T.; Karthikeyan, L.; Senthilkumar, V. S.

2016-11-01

The present work aims to investigate the effects of the temperature gradient developed within the tool profiles on the formability of IS 513 CR3-grade steel sheets using the cup drawing test. The deformation characteristics of steel sheets were analyzed by comparing the thicknesses in various regions of the formed cup and also the limiting drawing ratios (LDR). Finite element simulations were carried out to predict the behavior of the steel sheets in isothermal and non-isothermal forming using Abaqus/Standard 6.12-1. An analytical model created by Kim was used to validate the experimental and finite element analysis (FEA) results on identical process parameters. Both the FEA and analytical modeling results showed that formability improvement is possible in warm forming; the findings are in good agreement with the experimental results in determining the locations and values of excessive thinning. The results also indicated that formability improvement cannot be achieved by keeping the tooling temperature at the same level. The LDR increased by around 9.5% in isothermal forming and by 19% in non-isothermal forming (with the punch maintained at a lower temperature compared with the die and blank holder). In addition, the fractured surfaces of unsuccessfully formed samples were analyzed using scanning electron microscopy. Metallographic investigations confirmed that the fracture mechanism during the forming of IS 513 CR3-grade steel sheets depends on the brittleness, strain hardening value, forming temperature, and magnitude of stresses developed.

The drawing effect: Evidence for reliable and robust memory benefits in free recall.

PubMed

Wammes, Jeffrey D; Meade, Melissa E; Fernandes, Myra A

2016-01-01

In 7 free-recall experiments, the benefit of creating drawings of to-be-remembered information relative to writing was examined as a mnemonic strategy. In Experiments 1 and 2, participants were presented with a list of words and were asked to either draw or write out each. Drawn words were better recalled than written. Experiments 3-5 showed that the memory boost provided by drawing could not be explained by elaborative encoding (deep level of processing, LoP), visual imagery, or picture superiority, respectively. In Experiment 6, we explored potential limitations of the drawing effect, by reducing encoding time and increasing list length. Drawing, relative to writing, still benefited memory despite these constraints. In Experiment 7, the drawing effect was significant even when encoding trial types were compared in pure lists between participants, inconsistent with a distinctiveness account. Together these experiments indicate that drawing enhances memory relative to writing, across settings, instructions, and alternate encoding strategies, both within- and between-participants, and that a deep LoP, visual imagery, or picture superiority, alone or collectively, are not sufficient to explain the observed effect. We propose that drawing improves memory by encouraging a seamless integration of semantic, visual, and motor aspects of a memory trace.

Bottom-up and top-down triggers of diversification: A new look at the evolutionary ecology of scavenging amphipods in the deep sea

NASA Astrophysics Data System (ADS)

Havermans, Charlotte; Smetacek, Victor

2018-05-01

The initial, anthropocentric view of the deep ocean was that of a hostile environment inhabited by organisms rendered lethargic by constant high pressure, low temperature and sparse food supply, hence evolving slowly. This conceptual framework of a spatially and temporally homogeneous, connected, strongly bottom-up controlled habitat implied a strong constraint on, or poor incentive for, speciation. Hence, the discovery in the late 1960s of high species diversity of abyssal benthic invertebrates came as a surprise. Since then, the slow-motion view of deep-sea ecology and evolution has speeded up and diversified in the light of increasing evidence accumulating from in situ visual observations complemented by molecular and other tools. The emerging picture is that of a much livelier, highly diversified and more complex deep-sea fauna than previously assumed. In this review we examine the consequences of the incoming information for developing a broader view of evolutionary ecology in the deep sea, and for scavenging amphipods in particular. We revisit the food supply to the deep-sea floor and hypothesize that the dead bodies of animals, ranging from zooplankton to large fish are likely to be a more important source of food than their friable faeces. Camera observations of baited traps indicate that amphipod carrion-feeders arrive within hours at the bait which continues to draw new individuals for days to months later, presumably by scent trails in tidal currents. We explore the different stages of food acquisition upon which natural selection may have acted, from detection to ingestion, and discuss the possibility of a broader range of food acquisition strategies, including predation and specializations. Although currently neglected in deep-sea ecology, top-down factors are likely to play a more important role in the evolution of deep-sea organisms. Predation on amphipods at baits by bathyal and abyssal fishes, and large predatory crustaceans in the hadal zone, is often observed. Finally, we develop hypotheses regarding the effects of past, present and imminent anthropogenic activities on scavenger biomass and how these can be tested with the most modern tools.

Micro-hydromechanical deep drawing of metal cups with hydraulic pressure effects

NASA Astrophysics Data System (ADS)

Luo, Liang; Jiang, Zhengyi; Wei, Dongbin; Wang, Xiaogang; Zhou, Cunlong; Huang, Qingxue

2018-03-01

Micro-metal products have recently enjoyed high demand. In addition, metal microforming has drawn increasing attention due to its net-forming capability, batch manufacturing potential, high product quality, and relatively low equipment cost. Micro-hydromechanical deep drawing (MHDD), a typical microforming method, has been developed to take advantage of hydraulic force. With reduced dimensions, the hydraulic pressure development changes; accordingly, the lubrication condition changes from the macroscale to the microscale. A Voronoi-based finite element model is proposed in this paper to consider the change in lubrication in MHDD according to open and closed lubricant pocket theory. Simulation results agree with experimental results concerning drawing force. Changes in friction significantly affect the drawing process and the drawn cups. Moreover, defined wrinkle indexes have been shown to have a complex relationship with hydraulic pressure. High hydraulic pressure can increase the maximum drawing ratio (drawn cup height), whereas the surface finish represented by the wear is not linearly dependent on the hydraulic pressure due to the wrinkles.

Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function

NASA Astrophysics Data System (ADS)

Lou, Yanshan; Bae, Gihyun; Lee, Changsoo; Huh, Hoon

2010-06-01

This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET'2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the r-value distribution.

Experimental Investigations on Formability of Aluminum Tailor Friction Stir Welded Blanks in Deep Drawing Process

NASA Astrophysics Data System (ADS)

Kesharwani, R. K.; Panda, S. K.; Pal, S. K.

2015-02-01

In the present work, tailor friction stir welded blanks (TFSWBs) were fabricated successfully using 2.0-mm-thick AA5754-H22 and AA5052-H32 sheet metals with optimized tool design and process parameters. Taguchi L9 orthogonal array has been used to design the friction stir welding experiments, and the Grey relational analysis has been applied for the multi objective optimization in order to maximize the weld strength and total elongation reducing the surface roughness and energy consumption. The formability of the TFSWBs and parent materials was evaluated and compared in terms of limiting drawing ratio (LDR) using a conventional circular die. It was found that the formability of the TFSWBs was comparable with that of both the parent materials without failure in the weldment. A modified conical tractrix die (MCTD) was proposed to enhance the LDR of the TFSWBs. It was found that the formability was improved by 27% using the MCTD.

Deep drawing of 304 L Steel Sheet using Vegetable oils as Forming Lubricants

NASA Astrophysics Data System (ADS)

Shashidhara, Y. M.; Jayaram, S. R.

2012-12-01

The study involves the evaluation of deep drawing process using two non edible oils, Pongam (Pongammia pinnata) and Jatropha (Jatropha carcass) as metal forming lubricants. Experiments are conducted on 304L steel sheets under the raw and modified oils with suitable punch and die on a hydraulic press of 200 ton capacity. The punch load, draw-in-length and wall thickness distribution for deep drawn cups are observed. The drawn cups are scanned using laser scanning technique and 3D models are generated using modeling package. The wall thickness profiles of cups at different sections (or height) are measured using CAD package. Among the two raw oils, the drawn cups under Jatropha oil, have uniform wall thickness profile compared to Pongam oil. Uneven flow of material and cup rupturing is observed under methyl esters of Pongam and Jatropha oil lubricated conditions. However, the results are observed under epoxidised Jatropha oil with uniform metal flow and wall thicknesses compared to mineral and other versions of vegetable oils.

Prediction of forming limit in hydro-mechanical deep drawing of steel sheets using ductile fracture criterion

NASA Astrophysics Data System (ADS)

Oh, S.-T.; Chang, H.-J.; Oh, K. H.; Han, H. N.

2006-04-01

It has been observed that the forming limit curve at fracture (FLCF) of steel sheets, with a relatively higher ductility limit have linear shapes, similar to those of a bulk forming process. In contrast, the FLCF of sheets with a relatively lower ductility limit have rather complex shapes approaching the forming limit curve at neck (FLCN) towards the equi-biaxial strain paths. In this study, the FLCFs of steel sheets were measured and compared with the fracture strains predicted from specific ductile fracture criteria, including a criterion suggested by the authors, which can accurately describe FLCFs with both linear and complex shapes. To predict the forming limit for hydro-mechanical deep drawing of steel sheets, the ductile fracture criteria were integrated into a finite element simulation. The simulation, results based on the criterion suggested by authors accurately predicted the experimetal, fracture limits of steel sheets for the hydro-mechanical deep drawing process.

Forming Limit Diagram of Titanium and Stainless Steel Alloys to Study the Formability of Hydro-Mechanical Deep Drawing Parts

NASA Astrophysics Data System (ADS)

Shirizly, A.

2005-08-01

The increase demand for stronger, lighter and economic sheet metal products, make the Hydromecanical deep drawing process lately more and more popular. The Hydromecanical process is used in almost all types of sheet metal parts from home appliances and kitchenware to automotive and aviation industries. Therefore, many common materials were tested and characterized by their ability to sustain large strains via the well known Forming Limit Diagram (FLD). The aim of this work is to examine the forming capability if the Hydromecanical process in production of hemisphere parts made of materials commonly used in the aviation and aerospace industries. Experimental procedures were carried out to assess their ductility through FLD and the Forming Limit Carve (FLC).Two type of material sheets were tested herewith for demonstrating the procedure: commercial pure titanium and stainless steel 316L. A numerical simulation of the Hydromecanical process was examined and compared to self made Hydromecanical deep drawing of hemispherical parts.

Proposing a new iterative learning control algorithm based on a non-linear least square formulation - Minimising draw-in errors

NASA Astrophysics Data System (ADS)

Endelt, B.

2017-09-01

Forming operation are subject to external disturbances and changing operating conditions e.g. new material batch, increasing tool temperature due to plastic work, material properties and lubrication is sensitive to tool temperature. It is generally accepted that forming operations are not stable over time and it is not uncommon to adjust the process parameters during the first half hour production, indicating that process instability is gradually developing over time. Thus, in-process feedback control scheme might not-be necessary to stabilize the process and an alternative approach is to apply an iterative learning algorithm, which can learn from previously produced parts i.e. a self learning system which gradually reduces error based on historical process information. What is proposed in the paper is a simple algorithm which can be applied to a wide range of sheet-metal forming processes. The input to the algorithm is the final flange edge geometry and the basic idea is to reduce the least-square error between the current flange geometry and a reference geometry using a non-linear least square algorithm. The ILC scheme is applied to a square deep-drawing and the Numisheet’08 S-rail benchmark problem, the numerical tests shows that the proposed control scheme is able control and stabilise both processes.

Drawing as a Unique Mental Development Tool for Young Children: Interpersonal and Intrapersonal Dialogues

ERIC Educational Resources Information Center

Brooks, Margaret

2005-01-01

Using examples from children drawing in a year one classroom, this article examines firstly, how drawing operates as a unique mental tool, and secondly, the role of drawing in the construction and development of knowledge. Young children utilize prior knowledge and experience to negotiate and construct meaning through their interactions with…

An introduction to using children's drawings as an assessment tool.

PubMed

Wilson, D; Ratekin, C

1990-03-01

This article is intended to familiarize the ambulatory care provider with possible uses of children's drawings as assessment tools. Drawings can be a useful adjunct in detecting perceptual-motor difficulties and developmental delay, and can provide clues to self-image and family dynamics. Piaget's theory of cognitive development provides a framework to evaluate the child's intellectual development as reflected in drawings. The developmental scales of Koppitz are presented as a practical screening tool. The Koppitz scales include both developmental norms and items that might indicate emotional problems. Observing the child's drawing of the family provides clues to family dynamics. Becoming highly skilled in the evaluation of children's drawings requires a familiarity with neurophysiology, education, psychology, and psychoanalytic and developmental theory, along with intuition and practice. This article presents an introduction to evaluating children's drawings.

Comprehensive survey of deep learning in remote sensing: theories, tools, and challenges for the community

NASA Astrophysics Data System (ADS)

Ball, John E.; Anderson, Derek T.; Chan, Chee Seng

2017-10-01

In recent years, deep learning (DL), a rebranding of neural networks (NNs), has risen to the top in numerous areas, namely computer vision (CV), speech recognition, and natural language processing. Whereas remote sensing (RS) possesses a number of unique challenges, primarily related to sensors and applications, inevitably RS draws from many of the same theories as CV, e.g., statistics, fusion, and machine learning, to name a few. This means that the RS community should not only be aware of advancements such as DL, but also be leading researchers in this area. Herein, we provide the most comprehensive survey of state-of-the-art RS DL research. We also review recent new developments in the DL field that can be used in DL for RS. Namely, we focus on theories, tools, and challenges for the RS community. Specifically, we focus on unsolved challenges and opportunities as they relate to (i) inadequate data sets, (ii) human-understandable solutions for modeling physical phenomena, (iii) big data, (iv) nontraditional heterogeneous data sources, (v) DL architectures and learning algorithms for spectral, spatial, and temporal data, (vi) transfer learning, (vii) an improved theoretical understanding of DL systems, (viii) high barriers to entry, and (ix) training and optimizing the DL.

Electro-thermo-mechanical coupling analysis of deep drawing with resistance heating for aluminum matrix composites sheet

NASA Astrophysics Data System (ADS)

Zhang, Kaifeng; Zhang, Tuoda; Wang, Bo

2013-05-01

Recently, electro-plastic forming to be a focus of attention in materials hot processing research area, because it is a sort of energy-saving, high efficient and green manufacturing technology. An electro-thermo-mechanical model can be adopted to carry out the sequence simulation of aluminum matrix composites sheet deep drawing via electro-thermal coupling and thermal-mechanical coupling method. The first step of process is resistance heating of sheet, then turn off the power, and the second step is deep drawing. Temperature distribution of SiCp/2024Al composite sheet by resistance heating and sheet deep drawing deformation were analyzed. During the simulation, effect of contact resistances, temperature coefficient of resistance for electrode material and SiCp/2024Al composite on temperature distribution were integrally considered. The simulation results demonstrate that Sicp/2024Al composite sheet can be rapidly heated to 400° in 30s using resistances heating and the sheet temperature can be controlled by adjusting the current density. Physical properties of the electrode materials can significantly affect the composite sheet temperature distribution. The temperature difference between the center and the side of the sheet is proportional to the thermal conductivity of the electrode, the principal cause of which is that the heat transfers from the sheet to the electrode. SiCp/2024Al thin-wall part can be intactly manufactured at strain rate of 0.08s-1 and the sheet thickness thinning rate is limited within 20%, which corresponds well to the experimental result.

Using Drawings in Play Therapy: A Jungian Approach

ERIC Educational Resources Information Center

Birch, Jennifer; Carmichael, Karla D.

2009-01-01

Counselors working with children employ a variety of therapeutic techniques and tools from various theoretical models. One of these tools, drawing, is increasingly being implemented into play therapy. The purpose of this paper is to briefly review Jungian theoretical approaches as they pertain to drawing techniques within the counseling session.

Parametric analysis of plastic strain and force distribution in single pass metal spinning

NASA Astrophysics Data System (ADS)

Choudhary, Shashank; Tejesh, Chiruvolu Mohan; Regalla, Srinivasa Prakash; Suresh, Kurra

2013-12-01

Metal spinning also known as spin forming is one of the sheet metal working processes by which an axis-symmetric part can be formed from a flat sheet metal blank. Parts are produced by pressing a blunt edged tool or roller on to the blank which in turn is mounted on a rotating mandrel. This paper discusses about the setting up a 3-D finite element simulation of single pass metal spinning in LS-Dyna. Four parameters were considered namely blank thickness, roller nose radius, feed ratio and mandrel speed and the variation in forces and plastic strain were analysed using the full-factorial design of experiments (DOE) method of simulation experiments. For some of these DOE runs, physical experiments on extra deep drawing (EDD) sheet metal were carried out using En31 tool on a lathe machine. Simulation results are able to predict the zone of unsafe thinning in the sheet and high forming forces that are hint to the necessity for less-expensive and semi-automated machine tools to help the household and small scale spinning workers widely prevalent in India.

Constitutive Behavior and Deep Drawability of Three Aluminum Alloys Under Different Temperatures and Deformation Speeds

NASA Astrophysics Data System (ADS)

Panicker, Sudhy S.; Prasad, K. Sajun; Basak, Shamik; Panda, Sushanta Kumar

2017-08-01

In the present work, uniaxial tensile tests were carried out to evaluate the stress-strain response of AA2014, AA5052 and AA6082 aluminum alloys at four temperatures: 303, 423, 523 and 623 K, and three strain rates: 0.0022, 0.022 and 0.22 s-1. It was found that the Cowper-Symonds model was not a robust constitutive model, and it failed to predict the flow behavior, particularly the thermal softening at higher temperatures. Subsequently, a comparative study was made on the capability of Johnson-Cook (JC), modified Zerilli-Armstrong (m-ZA), modified Arrhenius (m-ARR) and artificial neural network (ANN) for modeling the constitutive behavior of all the three aluminum alloys under the mentioned strain rates and temperatures. Also, the improvement in formability of the materials was evaluated at an elevated temperature of 623 K in terms of cup height and maximum safe strains by conducting cylindrical cup deep drawing experiments under two different punch speeds of 4 and 400 mm/min. The cup heights increased during warm deep drawing due to thermal softening and increase in failure strains. Also, a small reduction in cup height was observed when the punch speed increased from 4 to 400 mm/min at 623 K. Hence, it was suggested to use high-speed deformation at elevated temperature to reduce both punch load and cycle time during the deep drawing process.

Development of a Hybrid Deep Drawing Process to Reduce Springback of AHSS

NASA Astrophysics Data System (ADS)

Boskovic, Vladimir; Sommitsch, Christoph; Kicin, Mustafa

2017-09-01

In future, the steel manufacturers will strive for the implementation of Advanced High Strength Steels (AHSS) in the automotive industry to reduce mass and improve structural performance. A key challenge is the definition of optimal and cost effective processes as well as solutions to introduce complex steel products in cold forming. However, the application of these AHSS often leads to formability problems such as springback. One promising approach in order to minimize springback is the relaxation of stress through the targeted heating of materials in the radius area after the deep drawing process. In this study, experiments are conducted on a Dual Phase (DP) and TWining Induced Plasticity (TWIP) steel for the process feasibility study. This work analyses the influence of various heat treatment temperatures on the springback reduction of deep drawn AHSS.

deepTools2: a next generation web server for deep-sequencing data analysis.

PubMed

Ramírez, Fidel; Ryan, Devon P; Grüning, Björn; Bhardwaj, Vivek; Kilpert, Fabian; Richter, Andreas S; Heyne, Steffen; Dündar, Friederike; Manke, Thomas

2016-07-08

We present an update to our Galaxy-based web server for processing and visualizing deeply sequenced data. Its core tool set, deepTools, allows users to perform complete bioinformatic workflows ranging from quality controls and normalizations of aligned reads to integrative analyses, including clustering and visualization approaches. Since we first described our deepTools Galaxy server in 2014, we have implemented new solutions for many requests from the community and our users. Here, we introduce significant enhancements and new tools to further improve data visualization and interpretation. deepTools continue to be open to all users and freely available as a web service at deeptools.ie-freiburg.mpg.de The new deepTools2 suite can be easily deployed within any Galaxy framework via the toolshed repository, and we also provide source code for command line usage under Linux and Mac OS X. A public and documented API for access to deepTools functionality is also available. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Dynamic analysis of six-bar mechanical press for deep drawing

NASA Astrophysics Data System (ADS)

Mitsi, S.; Tsiafis, I.; Bouzakis, K. D.

2017-02-01

This paper analyzes the dynamical behavior of a six-bar linkage used in mechanical presses for metal forming such as deep drawing. In the under study mechanism, a four-bar linkage is connected to a slider through an articulated binary link. The motion of the six-bar linkage is studied by kinematic analysis developing an analytical method. Furthermore, using an iterative method and d’ Alembert’s principle, the joint forces and drive moment are evaluated considering joint frictions. The simulation results obtained with a MATLAB program are validated by comparing the theoretical values of the input moment with the ones obtained from the conservation of energy law.

Effect of Hydraulic Pressure on Warm Hydro Mechanical Deep Drawing of Magnesium Alloy Sheet

NASA Astrophysics Data System (ADS)

Liu, Wei; Wu, Linzhi; Yuan, Shijian

The uniaxial tensile test and hydraulic bulging test of AZ31 magnesium alloy sheets were applied to study the influence of temperature on the material properties and obtain the forming limit curves at different temperatures. Numerical simulations of warm hydro mechanical deep drawing were carried out to investigate the effect of hydraulic pressure on the formability of a cylindrical cup, and the simplified hydraulic pressure profiles were used to simulate the loading procedure of hydraulic pressure. The optimal hydraulic pressure at different temperatures were given and verified by experimental studies at temperature 100°C and 170V.

Source and transport of human enteric viruses in deep municipal water supply wells

USGS Publications Warehouse

Bradbury, Kenneth R.; Borchardt, Mark A.; Gotkowitz, Madeline; Spencer, Susan K.; Zhu, Jun; Hunt, Randall J.

2013-01-01

Until recently, few water utilities or researchers were aware of possible virus presence in deep aquifers and wells. During 2008 and 2009 we collected a time series of virus samples from six deep municipal water-supply wells. The wells range in depth from approximately 220 to 300 m and draw water from a sandstone aquifer. Three of these wells draw water from beneath a regional aquitard, and three draw water from both above and below the aquitard. We also sampled a local lake and untreated sewage as potential virus sources. Viruses were detected up to 61% of the time in each well sampled, and many groundwater samples were positive for virus infectivity. Lake samples contained viruses over 75% of the time. Virus concentrations and serotypes observed varied markedly with time in all samples. Sewage samples were all extremely high in virus concentration. Virus serotypes detected in sewage and groundwater were temporally correlated, suggesting very rapid virus transport, on the order of weeks, from the source(s) to wells. Adenovirus and enterovirus levels in the wells were associated with precipitation events. The most likely source of the viruses in the wells was leakage of untreated sewage from sanitary sewer pipes.

An incremental analysis of a deep drawing steel’s material behaviour undergoing the predeformation using drawbeads

NASA Astrophysics Data System (ADS)

Schmid, H.; Suttner, S.; Merklein, M.

2017-09-01

Nowadays lightweight design in metal forming processes leads to complex deep drawing geometries, which can cause multiple damages. Therefore, drawbeads are one way to regulate and control material flow during the forming process. Not only in research, but also in industrial practice, it could be determined that material is work hardened passing drawbead geometries. It particularly means when material is pre-deformed with tensile and alternating bending loads. This incident also gives the opportunity to utilize it in a reasonable way if examined properly. To investigate these findings, a process oriented and comprehensive analysis of the material behaviour during these forming operations is needed. In this paper, sheet metal strips are linearly drawn through a drawbead and stopped after passing the drawbead. Within this forming operation, the material undergoes non-linear straining before reaching the in-plane position again. Here, the process will be stopped to investigate a permanent strengthening local along the sheet thickness. Therefore, microhardness measurements are realized before and after passing the drawbead. Because of its common use and its wide known material data, a deep drawing steel DC will be used for these studies. Additionally, the strategy is applied to advanced high strength steel.

"Thinking about Drinking": Exploring Children's Perceptions of Alcohol Using the Draw and Write Tool

ERIC Educational Resources Information Center

Farmer, Siobhan; Porcellato, Lorna

2016-01-01

Purpose: The purpose of this paper is to explore perceptions of alcohol held by schoolchildren using the "Draw and Write" tool, to inform the planning of alcohol education in the classroom setting. Design/methodology/approach: A specifically designed "Draw and Write" booklet was used with 169 children aged nine to ten years…

DEEP SPACE: High Resolution VR Platform for Multi-user Interactive Narratives

NASA Astrophysics Data System (ADS)

Kuka, Daniela; Elias, Oliver; Martins, Ronald; Lindinger, Christopher; Pramböck, Andreas; Jalsovec, Andreas; Maresch, Pascal; Hörtner, Horst; Brandl, Peter

DEEP SPACE is a large-scale platform for interactive, stereoscopic and high resolution content. The spatial and the system design of DEEP SPACE are facing constraints of CAVETM-like systems in respect to multi-user interactive storytelling. To be used as research platform and as public exhibition space for many people, DEEP SPACE is capable to process interactive, stereoscopic applications on two projection walls with a size of 16 by 9 meters and a resolution of four times 1080p (4K) each. The processed applications are ranging from Virtual Reality (VR)-environments to 3D-movies to computationally intensive 2D-productions. In this paper, we are describing DEEP SPACE as an experimental VR platform for multi-user interactive storytelling. We are focusing on the system design relevant for the platform, including the integration of the Apple iPod Touch technology as VR control, and a special case study that is demonstrating the research efforts in the field of multi-user interactive storytelling. The described case study, entitled "Papyrate's Island", provides a prototypical scenario of how physical drawings may impact on digital narratives. In this special case, DEEP SPACE helps us to explore the hypothesis that drawing, a primordial human creative skill, gives us access to entirely new creative possibilities in the domain of interactive storytelling.

A clinical tool for evaluating emotional well-being: self-drawings of hospitalized children.

PubMed

Dolidze, Khatuna; Smith, Emma L; Tchanturia, Kate

2013-01-01

This study investigated how the emotional wellbeing of children with congenital heart defect (CHD) hospitalized for heart surgery was expressed in self-drawings before and after their surgical treatment. A sample of 293 children produced self-drawings (hospitalized n=168, non-hospitalized n=125). The results indicate significant differences between drawings by hospitalized compared to non-hospitalized children, including size, color and omission of body parts. These differences were interpreted in line with previous analyses of projective drawing. We conclude that self-drawing evaluation is a useful tool to reveal insights into emotional wellbeing, promoting safe and easy communication. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

The Road Less Travelled: The Deep Challenges of Social Transformations

NASA Astrophysics Data System (ADS)

O'Brien, K. L.; Moser, S. C.

2016-12-01

How do we create the societal transformations necessary to stabilize the global climate and address other global goals? The roadmap metaphor guiding this session reflects a managerial approach to deep decarbonization, one that can be planned, charted, guided and implemented with the tools already known. Transformations and systems change involve far more than technical innovations, policy instruments and behavioral change. Drawing on a wide range of research on transformation processes from the social sciences and humanities and systems science, we argue that current approaches to decarbonization are likely to fail if they ignore theories of social change, including insights on the dynamics of social, cultural, economic and political transformations. Climate stabilization also calls for attention to the relationships between human values, political agency, power, and institutional change. It is precisely these deeper dynamics - which are typically ignored - that stall transformative change. Rather than developing a carbon road map, we suggest both a wider and deeper exploration of the territory of social transformation is needed, and suggest both different metaphors and methods to engage individual change agents and communities of actors, who together can create pathways to sustainability.

deepTools: a flexible platform for exploring deep-sequencing data.

PubMed

Ramírez, Fidel; Dündar, Friederike; Diehl, Sarah; Grüning, Björn A; Manke, Thomas

2014-07-01

We present a Galaxy based web server for processing and visualizing deeply sequenced data. The web server's core functionality consists of a suite of newly developed tools, called deepTools, that enable users with little bioinformatic background to explore the results of their sequencing experiments in a standardized setting. Users can upload pre-processed files with continuous data in standard formats and generate heatmaps and summary plots in a straight-forward, yet highly customizable manner. In addition, we offer several tools for the analysis of files containing aligned reads and enable efficient and reproducible generation of normalized coverage files. As a modular and open-source platform, deepTools can easily be expanded and customized to future demands and developments. The deepTools webserver is freely available at http://deeptools.ie-freiburg.mpg.de and is accompanied by extensive documentation and tutorials aimed at conveying the principles of deep-sequencing data analysis. The web server can be used without registration. deepTools can be installed locally either stand-alone or as part of Galaxy. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Enhancing Deep Learning: Lessons from the Introduction of Learning Teams in Management Education in France

ERIC Educational Resources Information Center

Borredon, Liz; Deffayet, Sylvie; Baker, Ann C.; Kolb, David

2011-01-01

Drawing from the reflective teaching and learning practices recommended in influential publications on learning styles, experiential learning, deep learning, and dialogue, the authors tested the concept of "learning teams" in the framework of a leadership program implemented for the first time in a top French management school…

Local laser-strengthening: Customizing the forming behavior of car body steel sheets

NASA Astrophysics Data System (ADS)

Wagner, M.; Jahn, A.; Beyer, E.; Balzani, D.

2018-05-01

Future trends in designing lightweight components especially for automotive applications increasingly require complex and delicate structures with highest possible level of capacity [1]. The manufacturing of metallic car body components is primarily realized by deep or stretch drawing. The forming process of especially cold rolled and large-sized components is typically characterized by inhomogeneous stress and strain distributions. As a result, the avoidance of undesirable deep drawing effects like earing and local necking is among the greatest challenges in forming complex car body structures [2]. Hence, a novel local laser-treatment approach with the objective of customizing the forming behavior of car body steel sheets is currently explored.

Thinking Drawing

ERIC Educational Resources Information Center

Adams, Eileen

2017-01-01

This article draws heavily on the author's critical autobiography: "Eileen Adams: Agent of Change." It presents evidence of the value of drawing as a medium for learning, particularly in art and design, and argues that drawing is a useful educational tool. The premise is that drawing makes you think. This article explains various…

Children's Drawings.

ERIC Educational Resources Information Center

Burgess, Ann W.; Hartman, Carol R.

1993-01-01

This paper reviews the literature on projective drawing tests and child sexual abuse, focusing on children's drawings as an associative tool for memory. The use of the event drawing series, which is a series of seven drawings by a child that graphically present the child's thinking about a specific event, is discussed. (JDD)

A Comparative Study on Formability of the Third-Generation Automotive Medium-Mn Steel and 22MnB5 Steel

NASA Astrophysics Data System (ADS)

Zheng, Guojun; Li, Xiaodong; Chang, Ying; Wang, Cunyu; Dong, Han

2018-02-01

Third-generation advanced automotive medium-Mn steel, which can replace 22MnB5 steel, was newly developed to improve the lightweight and crashworthiness of automobile. Studies on the formability and simulation method of medium-Mn steel have just been initiated. In this study, finite element simulation models of square-cup deep drawing were established based on various material property experiments and validated by experiments. The effects of blank holder force (BHF), fillet radii of tools (die and punch) on the maximum drawing depth (MDD), thickness distribution of the formed products, and the microstructure before and after forming were investigated and compared with those on 22MnB5 steel. Results show that the MDD of the two steels decreased with increased BHF but increased with the fillet radius of punch; however, the fillet radius of die showed no significant effect on the MDD for both steels. Compared with hot-formed 22MnB5 steel, the martensitic transformation of the hot-formed medium-Mn steel is rarely influenced by the process parameters; thus, it holds the complete, fine-grained, and uniform martensitic microstructure. Moreover, the medium-Mn has better formability, lower initial blank temperature, and smaller impact of BHF and fillet radius of tools on the hot-formed product. Thus, a theoretical basis for the replacement of 22MnB5 steel by medium-Mn steel in hot forming process is provided.

Research on AutoCAD secondary development and function expansion based on VBA technology

NASA Astrophysics Data System (ADS)

Zhang, Runmei; Gu, Yehuan

2017-06-01

AutoCAD is the most widely used drawing tool among the similar design drawing products. In the process of drawing different types of design drawings of the same product, there are a lot of repetitive and single work contents. The traditional manual method uses a drawing software AutoCAD drawing graphics with low efficiency, high error rate and high input cost shortcomings and many more. In order to solve these problems, the design of the parametric drawing system of the hot-rolled I-beam (steel beam) cross-section is completed by using the VBA secondary development tool and the Access database software with large-capacity storage data, and the analysis of the functional extension of the plane drawing and the parametric drawing design in this paper. For the secondary development of AutoCAD functions, the system drawing work will be simplified and work efficiency also has been greatly improved. This introduction of parametric design of AutoCAD drawing system to promote the industrial mass production and related industries economic growth rate similar to the standard I-beam hot-rolled products.

Metaphors and Drawings as Research Tools of Head Teachers' Perceptions on Their Management and Leadership Roles and Responsibilities

ERIC Educational Resources Information Center

Argyropoulou, Eleftheria; Hatira, Kalliopi

2014-01-01

This article introduces an alternative qualitative research tool: metaphor and drawing, as projections of personality features, to explore underlying concepts and values, thoughts and beliefs, fears and hesitations, aspirations and ambitions of the research subjects. These two projective tools are used to explore Greek state kindergarten head…

Prediction of thinning of the sheet metal in the program AutoForm and its experimental verification

NASA Astrophysics Data System (ADS)

Fedorko, M.; Urbánek, M.; Rund, M.

2017-02-01

The manufacture of press-formed parts often involves deep-drawing operations. Deep drawing, however, can be deemed an industrial branch in its own right. Today, many experimental as well as numerical methods are available for designing and optimizing deep drawing operations. The best option, however, is to combine both approaches. The present paper describes one such investigation. Here, measurements and numerical simulation were used for mapping the impact of anisotropy on thickness variation in a spherical-shaped drawn part of DC01 steel. Variation in sheet thickness was measured on spherical-shaped drawn parts of various geometries by means of two cameras, and evaluated with digital image correlation using the ARAMIS software from the company GOM. The forming experiment was carried out on an INOVA 200 kN servohydraulic testing machine in which the force vs. piston displacement curve was recorded. The same experiment was then numerically simulated and analyzed using the AUTOFORM software. Various parameters were monitored, such as thinning, strain magnitude, formability, and others. For the purpose of this simulation, a series of mechanical tests was conducted to obtain descriptions of the experimental material of 1.5 mm thickness. A material model was constructed from the tests data involving the work-hardening curve, the impact of anisotropy, and the forming limit diagram. Specifically, these tests included tensile tests, the Nakajima test, and the stacked test, which were carried out to determine materials data for the model. The actual sheet thickness was measured on a sectioned spherical-shaped drawn part using a NIKON optical microscope. The variations in thickness along defined lines on the sectioned drawn part were compared with the numerical simulations data using digital image correlation. The above-described experimental programme is suitable for calibrating a material model for any computational software and can correctly solve deep-drawing problems.

Combining the pressure effect with local heat treatment for improving the sheet metal forming process

NASA Astrophysics Data System (ADS)

Palumbo, G.; Piccininni, A.; Guglielmi, P.; Sorgente, D.; Tricarico, L.

2016-08-01

The present work deals with the advantages in the Hydromechanical Deep Drawing (HDD) when AA5754 Tailored Heat Treated Blanks (THTBs) are adopted. It is well known that the creation of a suitable distribution of material properties increases the process performance. When non heat-treatable alloys are considered, the THTB approach can be successfully applied to increase the Limit Drawing Ratio (LDR) by changing the peripheral zone into the annealed state starting from a cold-worked blank. If this approach is combined with the advantages of a counterpressure, even more remarkable improvements can be achieved. Due to the large number of involved parameters, the optimized design of both the local treatment and the pressure profile were investigated coupling an axial symmetric Finite Element model with the integration platform modeFRONTIER. Results confirmed the possibility of increasing the LDR from 2.0 (Deep Drawing using a blank in the annealed state) up to about 3.0 if combining the adoption of a THTB with the optimal pressure profile.

SPECIAL ACTIVITIES SUPPLEMENTAL TO AND RELATED TO THE ART PROGRAM AT DEEP RIVER OUTDOOR EDUCATION CENTER.

ERIC Educational Resources Information Center

Gary City Public School System, IN.

A CURRICULUM GUIDE DEALING WITH VARIOUS SUBJECT AREAS WAS PREPARED FOR POSSIBLE STUDY ACTIVITIES THAT WOULD USE THE LEARNING RESOURCES AVAILABLE AT THE DEEP RIVER OUTDOOR EDUCATION CENTER IN GARY, INDIANA. ACTIVITIES GUIDES ARE PRESENTED FOR (1) ART ACTITIVIES RELATED TO DESIGN, COLOR, LANDSCAPE REPRESENTATION, PAPER CONSTRUCTION, DRAWING, PRINT…

Make a Drawing. Effects of Strategic Knowledge, Drawing Accuracy, and Type of Drawing on Students' Mathematical Modelling Performance

ERIC Educational Resources Information Center

Rellensmann, Johanna; Schukajlow, Stanislaw; Leopold, Claudia

2017-01-01

Drawing strategies are widely used as a powerful tool for promoting students' learning and problem solving. In this article, we report the results of an inferential mediation analysis that was applied to investigate the roles that strategic knowledge about drawing and the accuracy of different types of drawings play in mathematical modelling…

Try This: Draw Like a Scientist

ERIC Educational Resources Information Center

Preston, Christine

2016-01-01

Young children love to draw, and should be encouraged to explore drawing as a communication tool. Drawing is a means by which children can express their thoughts, interests and feelings, long before they learn to write. We know that: "children's drawings are vehicles for expression and communication" (Chang, 2012, p. 187). This form of…

Iterating between Tools to Create and Edit Visualizations.

PubMed

Bigelow, Alex; Drucker, Steven; Fisher, Danyel; Meyer, Miriah

2017-01-01

A common workflow for visualization designers begins with a generative tool, like D3 or Processing, to create the initial visualization; and proceeds to a drawing tool, like Adobe Illustrator or Inkscape, for editing and cleaning. Unfortunately, this is typically a one-way process: once a visualization is exported from the generative tool into a drawing tool, it is difficult to make further, data-driven changes. In this paper, we propose a bridge model to allow designers to bring their work back from the drawing tool to re-edit in the generative tool. Our key insight is to recast this iteration challenge as a merge problem - similar to when two people are editing a document and changes between them need to reconciled. We also present a specific instantiation of this model, a tool called Hanpuku, which bridges between D3 scripts and Illustrator. We show several examples of visualizations that are iteratively created using Hanpuku in order to illustrate the flexibility of the approach. We further describe several hypothetical tools that bridge between other visualization tools to emphasize the generality of the model.

Formability analysis of austenitic stainless steel-304 under warm conditions

NASA Astrophysics Data System (ADS)

Lade, Jayahari; Singh, Swadesh Kumar; Banoth, Balu Naik; Gupta, Amit Kumar

2013-12-01

A warm deep drawing process of austenitic stainless steel-304 (ASS-304) of circular blanks with coupled ther mal analysis is studied in this article. 65 mm blanks were deep drawn at different temperatures and thickness distribution is experimentally measured after cutting the drawn component into two halves. The process is simulated using explicit fin ite element code LS-DYNA. A Barlat 3 parameter model is used in the simulation, as the material is anisotropic up to 30 0°C. Material properties for the simulation are determined at different temperatures using a 5 T UTM coupled with a furn ace. In this analysis constant punch speed and variable blank holder force (BHF) is applied to draw cups without wrinkle.

Generative Processes: Thick Drawing

ERIC Educational Resources Information Center

Wallick, Karl

2012-01-01

This article presents techniques and theories of generative drawing as a means for developing complex content in architecture design studios. Appending the word "generative" to drawing adds specificity to the most common representation tool and clarifies that such drawings are not singularly about communication or documentation but are…

A Beginner's Sequence of Programming Activities.

ERIC Educational Resources Information Center

Slesnick, Twila

1984-01-01

Presents various programing activities using the BASIC and LOGO programing languages. Activities are included in separate sections with a title indicating the nature of the activities and the "tools" (commands) needed. For example, "Old-fashioned drawing" requires several tools (PRINT, LIST, RUN, GOTO) to make drawings using…

Imitation, Inspiration, and Creation: Cognitive Process of Creative Drawing by Copying Others' Artworks.

PubMed

Okada, Takeshi; Ishibashi, Kentaro

2017-09-01

To investigate the cognitive processes underlying creative inspiration, we tested the extent to which viewing or copying prior examples impacted creative output in art. In Experiment 1, undergraduates made drawings under three conditions: (a) copying an artist's drawing, then producing an original drawing; (b) producing an original drawing without having seen another's work; and (c) copying another artist's work, then reproducing that artist's style independently. We discovered that through copying unfamiliar abstract drawings, participants were able to produce creative drawings qualitatively different from the model drawings. Process analyses suggested that participants' cognitive constraints became relaxed, and new perspectives were formed from copying another's artwork. Experiment 2 showed that exposure to styles of artwork considered unfamiliar facilitated creativity in drawing, while styles considered familiar did not do so. Experiment 3 showed that both copying and thoroughly viewing artwork executed using an unfamiliar style facilitated creativity in drawing, whereas merely thinking about alternative styles of artistic representation did not do so. These experiments revealed that deep encounters with unfamiliar artworks-whether through copying or prolonged observation-change people's cognitive representations of the act of drawing to produce novel artwork. Copyright © 2016 Cognitive Science Society, Inc.

The use of drawing as an alternative assessment tool in biology teaching

NASA Astrophysics Data System (ADS)

Nugraha, I.

2018-05-01

Science required the recording of data to build knowledge. The act of drawing an illustration is one of the oldest methods to record the data in science. Illustration in science provides information that the written word cannot, hence the old adage “A picture is worth a thousand words” is very important for studying science. Drawings an illustration is not only valuable for artists but also for scientists because some aspects of science process skills can also be developed through drawing. In terms of science teaching, applying the act of drawing can also be used as an assessment tool. In this study, we assessed drawing of human internal organs of 38 student teachers who enrolled human physiology course and its correlation to their final exam achievement. Guidance of biological drawing was employed to assess the quality, labelling, and annotations of the drawing. The finding of this study showed that there was a positive correlation between the quality of drawing and final exam achievement. It is suggested that using the method of drawing in combination with written responses assessment would provide a more complete information about student’s understanding of human internal organs.

Archaeological Investigation at El Dorado Lake, Butler County, Kansas. Phase III.

DTIC Science & Technology

1982-01-01

time during which deep disturbance predominated is estimated to be roughly equal to the number of years surface and shallow techniques have been... during excavation, but sampled. Measurements are therefore estimated from scale drawings of feature plans. However, the drawing of Feature 3 consists... roasting features with the limestones and/or deposited as refuse during separate disposal episodes. Fauna and Flora A total of 862 bones and bone

Thin film system with integrated load and temperature sensors for the technical application in deep drawing process

NASA Astrophysics Data System (ADS)

Biehl, Saskia; Paetsch, Nancy; Meyer-Kornblum, Eike

2017-05-01

In these days industry 4.0 resounded throughout the land and means the fourth industrial revolution. The industry has to tackle the task of a flexible and customer-oriented production. Therefor the need of sensor systems for the measurement of temperature and load, the two most important categories in production, is rising. For getting the real specification during the production process the integration of sensor elements in high load regions of machinery is very important. Thus wear resistant thin film sensor systems directly applied onto the surface of plant components are in development. These multilayer systems combine excellent wear resistance with sensory behaviour. The sensor data will lead to a deeper process understanding, to optimization of simulation tools, to reduction of rejects and to an improvement of flexibility in production.

Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

NASA Astrophysics Data System (ADS)

Hall, Roger W.; Foster, Alistair; Herrmann Praturlon, Anja

2017-09-01

The Hot Forming and in-tool Quenching (HFQ®) process is a proven technique to enable complex shaped stampings to be manufactured from high strength aluminium. Its widespread uptake for high volume production will be maximised if it is able to wholly amortise the additional investment cost of this process compared to conventional deep drawing techniques. This paper discusses the use of three techniques to guide some of the development decisions taken during upscaling of the HFQ® process. Modelling of Process timing, Cost and Life-cycle impact were found to be effective tools to identify where development budget could be focused in order to be able to manufacture low cost panels of different sizes from many different alloys in a sustainable way. The results confirm that raw material cost, panel trimming, and artificial ageing were some of the highest contributing factors to final component cost. Additionally, heat treatment and lubricant removal stages played a significant role in the overall life-cycle assessment of the final products. These findings confirmed development priorities as novel furnace design, fast artificial ageing and low-cost alloy development.

Models in palaeontological functional analysis

PubMed Central

Anderson, Philip S. L.; Bright, Jen A.; Gill, Pamela G.; Palmer, Colin; Rayfield, Emily J.

2012-01-01

Models are a principal tool of modern science. By definition, and in practice, models are not literal representations of reality but provide simplifications or substitutes of the events, scenarios or behaviours that are being studied or predicted. All models make assumptions, and palaeontological models in particular require additional assumptions to study unobservable events in deep time. In the case of functional analysis, the degree of missing data associated with reconstructing musculoskeletal anatomy and neuronal control in extinct organisms has, in the eyes of some scientists, rendered detailed functional analysis of fossils intractable. Such a prognosis may indeed be realized if palaeontologists attempt to recreate elaborate biomechanical models based on missing data and loosely justified assumptions. Yet multiple enabling methodologies and techniques now exist: tools for bracketing boundaries of reality; more rigorous consideration of soft tissues and missing data and methods drawing on physical principles that all organisms must adhere to. As with many aspects of science, the utility of such biomechanical models depends on the questions they seek to address, and the accuracy and validity of the models themselves. PMID:21865242

Psychological Distress and Drawing Tests among Women with Breast Cancer.

PubMed

Kim, Jiyeon; Youn, Soyoung; Choi, Byeongil; Jung, Kyung Hae; Ahn, Seung Do; Hwang, Sook Yeon; Chung, Seockhoon; Lee, Jaedam

2018-04-23

The aim of this study was to evaluate the use of the Diagnostic Drawing Series (DDS) as a screening tool for the breast cancer patients with psychological distress. All of 64 patients with breast cancer participated in this study. Patients' depressive and anxiety symptoms were assessed using Patient Health Questionnaire-9 (PHQ-9) and Generalized Anxiety Disorder-7 (GAD-7) when the DDS was applied to the partipicants. Depressed patients used more enclosure in the Feeling drawings ( P = 0.002) and tilt in Free drawings ( P = 0.048). Patients with anxiety drew a picture over 67% of the paper ( P = 0.015) in Tree drawing and more medium pressure ( P = 0.049) in Feeling drawings. Thirty four subjects (77.3%) of unstable emotion group used over 67% of the space ( P = 0.002). More Landscapes were observed in the Feeling drawings of unstable patients ( P = 0.042). These results suggested that DDS could be used as a supplemental screening tool for psychological distress in breast cancer patients.

Psychological Distress and Drawing Tests among Women with Breast Cancer

PubMed Central

2018-01-01

Background The aim of this study was to evaluate the use of the Diagnostic Drawing Series (DDS) as a screening tool for the breast cancer patients with psychological distress. Methods All of 64 patients with breast cancer participated in this study. Patients' depressive and anxiety symptoms were assessed using Patient Health Questionnaire-9 (PHQ-9) and Generalized Anxiety Disorder-7 (GAD-7) when the DDS was applied to the partipicants. Results Depressed patients used more enclosure in the Feeling drawings (P = 0.002) and tilt in Free drawings (P = 0.048). Patients with anxiety drew a picture over 67% of the paper (P = 0.015) in Tree drawing and more medium pressure (P = 0.049) in Feeling drawings. Thirty four subjects (77.3%) of unstable emotion group used over 67% of the space (P = 0.002). More Landscapes were observed in the Feeling drawings of unstable patients (P = 0.042). Conclusion These results suggested that DDS could be used as a supplemental screening tool for psychological distress in breast cancer patients. PMID:29686600

Implementation of a graphical user interface for the virtual multifrequency spectrometer: The VMS-Draw tool.

PubMed

Licari, Daniele; Baiardi, Alberto; Biczysko, Malgorzata; Egidi, Franco; Latouche, Camille; Barone, Vincenzo

2015-02-15

This article presents the setup and implementation of a graphical user interface (VMS-Draw) for a virtual multifrequency spectrometer. Special attention is paid to ease of use, generality and robustness for a panel of spectroscopic techniques and quantum mechanical approaches. Depending on the kind of data to be analyzed, VMS-Draw produces different types of graphical representations, including two-dimensional or three-dimesional (3D) plots, bar charts, or heat maps. Among other integrated features, one may quote the convolution of stick spectra to obtain realistic line-shapes. It is also possible to analyze and visualize, together with the structure, the molecular orbitals and/or the vibrational motions of molecular systems thanks to 3D interactive tools. On these grounds, VMS-Draw could represent a useful additional tool for spectroscopic studies integrating measurements and computer simulations. Copyright © 2014 Wiley Periodicals, Inc.

The Simpsons: Public Choice in the Tradition of Swift and Orwell

ERIC Educational Resources Information Center

Considine, John

2006-01-01

The author disagrees with Homer Simpson who claims that "...cartoons don't have any deep meaning. They're just stupid drawings that give you a cheap laugh." He argues that The Simpsons have a deep meaning in the same way as the works of Jonathan Swift and George Orwell. The message in The Simpsons, Swift, and Orwell is that those in charge do not…

Assessing attachment in school-aged children: Do the School-Age Assessment of Attachment and Family Drawings work together as complementary tools?

PubMed

Carr-Hopkins, Rebecca; De Burca, Calem; Aldridge, Felicity A

2017-07-01

Our goal was to identify an assessment package that could improve treatment planning for troubled children and their families. To assess the validity of our tools, we tested the relations among the School-Age Assessment of Attachment, the Family Drawing and children's risk status. We used the Dynamic-Maturational Model of Attachment and Adaptation to interpret the assessments in the hope of identifying a gradient of risk, and explore whether a new coding method improved the validity of Family Drawings and their utility as a tool to complement the School-Age Assessment of Attachment. The participants were 89 children, aged between 5 and 12 years; 32 children were involved with mental health services or child protection. Each child completed a School-Age Assessment of Attachment and a Family Drawing. Both assessments differentiated between clinical and normative referrals with moderate effect sizes when dichotomizing risk versus non-risk attachment. When the analysis incorporated a gradient of six attachment classifications, the effect sizes decreased, but specificity of risk increased. The School-Age Assessment of Attachment had greater validity for discriminating risk, and type of risk, than the Family Drawings. With a School-Age Assessment of Attachment and family history, the Family Drawing can provide information about distress that some children do not provide verbally. Integration of the two assessment tools alongside information about parental and family functioning appears to be the key to formulating children's problems.

Feasibility model of a high reliability five-year tape transport. Volume 3: Appendices. [detailed drawing and analytical tools used in analyses

NASA Technical Reports Server (NTRS)

Meyers, A. P.; Davidson, W. A.; Gortowski, R. C.

1973-01-01

Detailed drawings of the five year tape transport are presented. Analytical tools used in the various analyses are described. These analyses include: tape guidance, tape stress over crowned rollers, tape pack stress program, response (computer) program, and control system electronics description.

Stimulating Scientific Reasoning with Drawing-Based Modeling

NASA Astrophysics Data System (ADS)

Heijnes, Dewi; van Joolingen, Wouter; Leenaars, Frank

2018-02-01

We investigate the way students' reasoning about evolution can be supported by drawing-based modeling. We modified the drawing-based modeling tool SimSketch to allow for modeling evolutionary processes. In three iterations of development and testing, students in lower secondary education worked on creating an evolutionary model. After each iteration, the user interface and instructions were adjusted based on students' remarks and the teacher's observations. Students' conversations were analyzed on reasoning complexity as a measurement of efficacy of the modeling tool and the instructions. These findings were also used to compose a set of recommendations for teachers and curriculum designers for using and constructing models in the classroom. Our findings suggest that to stimulate scientific reasoning in students working with a drawing-based modeling, tool instruction about the tool and the domain should be integrated. In creating models, a sufficient level of scaffolding is necessary. Without appropriate scaffolds, students are not able to create the model. With scaffolding that is too high, students may show reasoning that incorrectly assigns external causes to behavior in the model.

Art in Paleontology: The Example of Manfred Reichel

NASA Astrophysics Data System (ADS)

Leria, M.; Ferràndez-Cañadell, C.

2013-12-01

Scientific illustration is a fundamental tool to communicate information through a form of nonverbal language with its own grammar and syntax. Contrary to the idea of scientific illustration as a simple scientific analytic tool, without a personal identity, we present an example where rigor is intrinsically linked to a high sensibility, and a deep knowledge of drawing that brings as a result a beautiful piece of art. In 1918 Manfred Reichel left his studies in Fine Arts (École des Beaux-Arts in Geneva, Switzerland) and began his career as a scientist, obtaining a degree in biological sciences from University of Neuchâtel. Humble by nature, he assumed he would not become a great artist, as he would tell his students. His point of view in micropaleontology, focused in foraminifera, protozoa with a complex shell, had an impact on his students and other specialists. His background in art benefited him in the research of the more complex foraminiferal structures, which he clarified by means of rich illustrations, with a high degree of beauty, inspired by the French naturalists. His research on the study of the shell of some foraminiferal groups, such as alveolinids, orbitolinids and fusulinids, produced some superb illustrations, which display their complex structure in such a comprehensible way that they could not be improved by modern techniques and are still used today. Reichel started teaching micropaleontology in 1935 at the Geologisch-Paläontologisches Institut of the University of Basel. As a professor of paleontology, he trained his students in drawing to enhance the level of description of their illustrations. When the interpretation turned out to be too difficult, he would encourage them to reconstruct the architecture of foraminifera, creating a 3D model, in order to visualize how the drawing should be. Due to his interest on ornithology and the mechanics of flight, he also created pictorial illustrations of birds, published in magazines and books. He used this ability to elaborate vivid restorations of pterosaurus and extinct birds, such as Archaeopteryx. This study is based on a revision of the scientific papers by Manfred Reichel, along with some of the work done by his students related to the foraminiferal research. In addition, the examination of the collection of Reichel's drawings and casts held by the Natural History Museum in Basel, as well as interviews with his family and students were highly helpful to understand how he applied his artistic skills to teaching and research. From this study, we can assess the significance of visual education on micropaleontologists, arguing that classical convention in drawing is still and irreplaceable tool in natural sciences. Illustration of the test, scale 1:50, of Praealveolina cretacea tenuis. (Manfred Reichel, 1937. Étude sur les Alvéolines, Mémoires de la Société paléontologique Suisse, Vol. LIX, plate XI, fig. IIa)

Drawing Dynamic Geometry Figures Online with Natural Language for Junior High School Geometry

ERIC Educational Resources Information Center

Wong, Wing-Kwong; Yin, Sheng-Kai; Yang, Chang-Zhe

2012-01-01

This paper presents a tool for drawing dynamic geometric figures by understanding the texts of geometry problems. With the tool, teachers and students can construct dynamic geometric figures on a web page by inputting a geometry problem in natural language. First we need to build the knowledge base for understanding geometry problems. With the…

Mechanical Behaviour of Conventional Materials at Experimental Conditions of Deep Drawing Technological Process

NASA Astrophysics Data System (ADS)

Nikolov, N.; Pashkouleva, D.; Kavardzhikov, V.

2012-09-01

The paper deals with experimental investigations on the mechanical behaviour of body-centred-cubic (BCC) and face-centred-cubic (FCC)-conventionally structured sheet metalic-metalic materials under stress-strain conditions of a deep drawing process determined by a coefficient close to the limiting one for Steel 08 and punch diameter of 50 mm. The mechanical characteristics of the investigated materials are identified by one-dimensional tension tests. The materials' responses, as results of identical loading conditions, are described by the change of blank sizes and characteristics of the forming processes. The chosen deformation path ensures obtaining a qualitative steel piece and leads to failures of aluminium and brass blanks. The reported results could be useful for investigations and predictions of the mechanical responses of such type metallic structures applying microscopic instrumented observations and numerical simulations.

Deep level transient spectroscopy (DLTS) on colloidal-synthesized nanocrystal solids.

PubMed

Bozyigit, Deniz; Jakob, Michael; Yarema, Olesya; Wood, Vanessa

2013-04-24

We demonstrate current-based, deep level transient spectroscopy (DLTS) on semiconductor nanocrystal solids to obtain quantitative information on deep-lying trap states, which play an important role in the electronic transport properties of these novel solids and impact optoelectronic device performance. Here, we apply this purely electrical measurement to an ethanedithiol-treated, PbS nanocrystal solid and find a deep trap with an activation energy of 0.40 eV and a density of NT = 1.7 × 10(17) cm(-3). We use these findings to draw and interpret band structure models to gain insight into charge transport in PbS nanocrystal solids and the operation of PbS nanocrystal-based solar cells.

Using Tablets as Tools for Learner-Generated Drawings in the Context of Teaching the Kinetic Theory of Gases

ERIC Educational Resources Information Center

Lehtinen, A.; Viiri, J.

2014-01-01

Even though research suggests that the use of drawings could be an important part of learning science, learner-generated drawings have not received much attention in physics classrooms. This paper presents a method for recording students' drawings and group discussions using tablets. Compared to pen and paper, tablets offer unique benefits, which…

Metabolic network visualization eliminating node redundance and preserving metabolic pathways

PubMed Central

Bourqui, Romain; Cottret, Ludovic; Lacroix, Vincent; Auber, David; Mary, Patrick; Sagot, Marie-France; Jourdan, Fabien

2007-01-01

Background The tools that are available to draw and to manipulate the representations of metabolism are usually restricted to metabolic pathways. This limitation becomes problematic when studying processes that span several pathways. The various attempts that have been made to draw genome-scale metabolic networks are confronted with two shortcomings: 1- they do not use contextual information which leads to dense, hard to interpret drawings, 2- they impose to fit to very constrained standards, which implies, in particular, duplicating nodes making topological analysis considerably more difficult. Results We propose a method, called MetaViz, which enables to draw a genome-scale metabolic network and that also takes into account its structuration into pathways. This method consists in two steps: a clustering step which addresses the pathway overlapping problem and a drawing step which consists in drawing the clustered graph and each cluster. Conclusion The method we propose is original and addresses new drawing issues arising from the no-duplication constraint. We do not propose a single drawing but rather several alternative ways of presenting metabolism depending on the pathway on which one wishes to focus. We believe that this provides a valuable tool to explore the pathway structure of metabolism. PMID:17608928

Picturing academic learning: salutogenic and health promoting perspectives on drawings.

PubMed

Garista, Patrizia; Pocetta, Giancarlo; Lindström, Bengt

2018-05-25

More than 20 years ago an article about the use of drawings in higher education appeared in a medical journal. After that, other papers explored the possible contribution of drawings in adult education, while only very few in the field of health promotion and education. This article aims to introduce the use of drawing in this field using the salutogenic lens to think, plan and reflect on academic learning. Reflections on what salutogenesis is and what we can consider a clear application of salutogenic principles to the learning process answer a hypothetical question for the reader concerning the relationship between drawings and health promotion theories. They appear as communication tools capable of exploring meaning-making processes, capturing data that is flexible to dynamic systems, power relations, as well as emotional and latent aspects of human experience. This article proposes a connection between salutogenesis and drawings through: a theoretical framework on salutogenic learning and drawings; a teacher practice and its tools focusing the critical point on visual data analysis in a learning environment; a learner case example for knowledge and capacity building through the drawing process; and a health promotion competency-based analysis. Our case example illustrates how drawings were introduced in a post-graduate course in Health Promotion and Education and argues their strengths and weaknesses.

The dispositions of things: the non-human dimension of power and ethics in patient-centred medicine.

PubMed

Gardner, John; Cribb, Alan

2016-09-01

This article explores power relations between clinicians, patients and families as clinicians engage in patient-centred ethical work. Specifically, we draw on actor-network theory to interrogate the role of non-human elements in distributing power relations in clinical settings, as clinicians attempt to manage the expectations of patients and families. Using the activities of a multidisciplinary team providing deep brain stimulation to children with severe movement disorders as an example, we illustrate how a patient-centred tool is implicated in establishing relations that constitute four modes of power: 'power over', 'power to', "power storage" and "power/discretion". We argue that understanding the role of non-human elements in structuring power relations can guide and inform bioethical discussions on the suitability of patient-centred approaches in clinical settings. © 2016 The Authors. Sociology of Health & Illness published by John Wiley & Sons Ltd on behalf of Foundation for SHIL.

Mechnical Drawing/Drafting Curriculum Guide.

ERIC Educational Resources Information Center

Gregory, Margaret R.; Benson, Robert T.

This curriculum guide consists of materials for teaching a course in mechanical drawing and drafting. Addressed in the individual units of the guide are the following topics: the nature and scope of drawing and drafting, visualization and spatial relationships, drafting tools and materials, linework, freehand lettering, geometric construction,…

Melted Ice

NASA Image and Video Library

2009-06-24

These drawings depict explanations for the source of intense heat that has been measured coming from Enceladus south polar region. These models predict that water could exist in a deep layer as an ocean or sea and also near the surface.

Methods, Theory, and the Practice of Feminist Research: A Response to Janet Chafetz

ERIC Educational Resources Information Center

Walker, Alexis J.

2004-01-01

Janet Chafetz dismisses Audre Lorde's dictum that you cannot dismantle the master's house using the master's tools. Instead, she argues compellingly that feminists draw from the same tool kit from which all social scientists draw and not from feminist theory and feminist methodology. It is perhaps an indication of how far we have come that four…

Reflective Drawing as a Tool for Reflection in Design Research

ERIC Educational Resources Information Center

Calvo, Mirian

2017-01-01

This article explores the role of drawing as a tool for reflection. It reports on a PhD research project that aims to identify and analyse the value that co-design processes can bring to participants and their communities. The research is associated with Leapfrog, a three-year project funded by the UK Arts and Humanities Research Council (AHRC).…

Visual Literacy Skills of Students in College-Level Biology: Learning Outcomes Following Digital or Hand-Drawing Activities

ERIC Educational Resources Information Center

Bell, Justine C.

2014-01-01

To test the claim that digital learning tools enhance the acquisition of visual literacy in this generation of biology students, a learning intervention was carried out with 33 students enrolled in an introductory college biology course. This study compared learning outcomes following two types of learning tools: a traditional drawing activity, or…

Drawing-Voice as a Methodological Tool for Understanding Teachers' Concerns in a Pilot Hmong-Vietnamese Bilingual Education Programme in Vietnam

ERIC Educational Resources Information Center

Lavoie, Constance; Benson, Carol

2011-01-01

This paper illustrates how a methodological tool called "drawing-voice" can be used to demonstrate qualitatively what statistical and policy data are not able to reveal regarding the educational realities of Hmong minority communities in northern Vietnam, particularly with regard to the role of local language and culture in school. This…

Effectiveness and Adoption of a Drawing-to-Learn Study Tool for Recall and Problem Solving: Minute Sketches with Folded Lists

ERIC Educational Resources Information Center

Heideman, Paul D.; Flores, K. Adryan; Sevier, Lu M.; Trouton, Kelsey E.

2017-01-01

Drawing by learners can be an effective way to develop memory and generate visual models for higher-order skills in biology, but students are often reluctant to adopt drawing as a study method. We designed a nonclassroom intervention that instructed introductory biology college students in a drawing method, minute sketches in folded lists (MSFL),…

The Mediation of Tools in the Development of Formal Mathematical Concepts: The Compass and the Circle as an Example.

ERIC Educational Resources Information Center

Chassapis, Dimitris

1999-01-01

Focuses on the process by which children develop a formal mathematical concept of the circle by using various instruments to draw circles within the context of a goal-directed drawing task. Concludes that the use of the compass in circle drawing structures the circle-drawing operation in a radically different fashion than circle tracers and…

Stimulating Scientific Reasoning with Drawing-Based Modeling

ERIC Educational Resources Information Center

Heijnes, Dewi; van Joolingen, Wouter; Leenaars, Frank

2018-01-01

We investigate the way students' reasoning about evolution can be supported by drawing-based modeling. We modified the drawing-based modeling tool SimSketch to allow for modeling evolutionary processes. In three iterations of development and testing, students in lower secondary education worked on creating an evolutionary model. After each…

Deep Drawing Simulations With Different Polycrystalline Models

NASA Astrophysics Data System (ADS)

Duchêne, Laurent; de Montleau, Pierre; Bouvier, Salima; Habraken, Anne Marie

2004-06-01

The goal of this research is to study the anisotropic material behavior during forming processes, represented by both complex yield loci and kinematic-isotropic hardening models. A first part of this paper describes the main concepts of the `Stress-strain interpolation' model that has been implemented in the non-linear finite element code Lagamine. This model consists of a local description of the yield locus based on the texture of the material through the full constraints Taylor's model. The texture evolution due to plastic deformations is computed throughout the FEM simulations. This `local yield locus' approach was initially linked to the classical isotropic Swift hardening law. Recently, a more complex hardening model was implemented: the physically-based microstructural model of Teodosiu. It takes into account intergranular heterogeneity due to the evolution of dislocation structures, that affects isotropic and kinematic hardening. The influence of the hardening model is compared to the influence of the texture evolution thanks to deep drawing simulations.

Analysis of Square Cup Deep-Drawing Test of Pure Titanium

NASA Astrophysics Data System (ADS)

Ogawa, Takaki; Ma, Ninshu; Ueyama, Minoru; Harada, Yasunori

2016-08-01

The prediction of formability of titunium is more difficult than steels since its strong anisotropy. If computer simulation can estimate the formability of titanium, we can select the optimal forming conditions. The purpose of this study was to acquire knowledge for the formability prediction by the computer simulation of the square cup deep-drawing of pure titanium. In this paper, the results of FEM analsis of pure titanium were compared with the experimental results to examine the analysis validity. We analyzed the formability of deepdrawing square cup of titanium by the FEM using solid elements. Compared the analysis results with the experimental results such as the forming shape, the punch load, and the thickness, the validity was confirmed. Further, through analyzing the change of the thickness around the forming corner, it was confirmed that the thickness increased to its maximum value during forming process at the stroke of 35mm more than the maximum stroke.

Identification of inelastic parameters based on deep drawing forming operations using a global-local hybrid Particle Swarm approach

NASA Astrophysics Data System (ADS)

Vaz, Miguel; Luersen, Marco A.; Muñoz-Rojas, Pablo A.; Trentin, Robson G.

2016-04-01

Application of optimization techniques to the identification of inelastic material parameters has substantially increased in recent years. The complex stress-strain paths and high nonlinearity, typical of this class of problems, require the development of robust and efficient techniques for inverse problems able to account for an irregular topography of the fitness surface. Within this framework, this work investigates the application of the gradient-based Sequential Quadratic Programming method, of the Nelder-Mead downhill simplex algorithm, of Particle Swarm Optimization (PSO), and of a global-local PSO-Nelder-Mead hybrid scheme to the identification of inelastic parameters based on a deep drawing operation. The hybrid technique has shown to be the best strategy by combining the good PSO performance to approach the global minimum basin of attraction with the efficiency demonstrated by the Nelder-Mead algorithm to obtain the minimum itself.

New Techniques for Deep Learning with Geospatial Data using TensorFlow, Earth Engine, and Google Cloud Platform

NASA Astrophysics Data System (ADS)

Hancher, M.

2017-12-01

Recent years have seen promising results from many research teams applying deep learning techniques to geospatial data processing. In that same timeframe, TensorFlow has emerged as the most popular framework for deep learning in general, and Google has assembled petabytes of Earth observation data from a wide variety of sources and made them available in analysis-ready form in the cloud through Google Earth Engine. Nevertheless, developing and applying deep learning to geospatial data at scale has been somewhat cumbersome to date. We present a new set of tools and techniques that simplify this process. Our approach combines the strengths of several underlying tools: TensorFlow for its expressive deep learning framework; Earth Engine for data management, preprocessing, postprocessing, and visualization; and other tools in Google Cloud Platform to train TensorFlow models at scale, perform additional custom parallel data processing, and drive the entire process from a single familiar Python development environment. These tools can be used to easily apply standard deep neural networks, convolutional neural networks, and other custom model architectures to a variety of geospatial data structures. We discuss our experiences applying these and related tools to a range of machine learning problems, including classic problems like cloud detection, building detection, land cover classification, as well as more novel problems like illegal fishing detection. Our improved tools will make it easier for geospatial data scientists to apply modern deep learning techniques to their own problems, and will also make it easier for machine learning researchers to advance the state of the art of those techniques.

Using tablets as tools for learner-generated drawings in the context of teaching the kinetic theory of gases

NASA Astrophysics Data System (ADS)

Lehtinen, A.; Viiri, J.

2014-05-01

Even though research suggests that the use of drawings could be an important part of learning science, learner-generated drawings have not received much attention in physics classrooms. This paper presents a method for recording students’ drawings and group discussions using tablets. Compared to pen and paper, tablets offer unique benefits, which include the recording of the whole drawing process and of the discussion associated with the drawing. A study, which investigated the use of drawings and the need for guidance among Finnish upper secondary school students, is presented alongside ideas for teachers on how to see drawing in a new light.

House-Tree-Person Drawings and Sex Offenders: A Pilot Study.

ERIC Educational Resources Information Center

Lopez, Jennifer R.; Carolan, Richard

2001-01-01

Investigates whether or not specific indicators appear more frequently in the House-Tree-Person drawings of sex offenders when compared to drawings of a control group. The goal of the research is to explore the use of an art-based assessment as a tool for the early identification of sex offenders. (BF)

FDDS: A Cross Validation Study.

ERIC Educational Resources Information Center

Sawyer, Judy Parsons

The Family Drawing Depression Scale (FDDS) was created by Wright and McIntyre to provide a clear and reliable scoring method for the Kinetic Family Drawing as a procedure for detecting depression. A study was conducted to confirm the value of the FDDS as a systematic tool for interpreting family drawings with populations of depressed individuals.…

Online Working Drawing Review and Assessment

ERIC Educational Resources Information Center

McInnis, Jennifer; Sobin, Alexandra; Bertozzi, Nicholas; Planchard, Marie

2010-01-01

This paper describes the development and implementation of an online working drawing review video and online assessment tool. Particular attention was paid to dimensioning and ASME ANSI Y14 standards with the goal of improving the quality of the working drawings required in final design project reports. All members of freshmen design teams in the…

Nitrate Contamination of Deep Aquifers in the Salinas Valley, California

NASA Astrophysics Data System (ADS)

Moran, J. E.; Esser, B. K.; Hillegonds, D. J.; Holtz, M.; Roberts, S. K.; Singleton, M. J.; Visser, A.; Kulongoski, J. T.; Belitz, K.

2011-12-01

The Salinas Valley, known as 'the salad bowl of the world', has been an agricultural center for more than 100 years. Irrigated row crops such as lettuce and strawberries dominate both land use and water use. Groundwater is the exclusive supply for both irrigation and drinking water. Some irrigation wells and most public water supply wells in the Salinas Valley are constructed to draw water from deep portions of the aquifer system, where contamination by nitrate is less likely than in the shallow portions of the aquifer system. However, a number of wells with top perforations greater than 75 m deep, screened below confining or semi-confining units, have nitrate concentrations greater than the Maximum Contaminant Limit (MCL) of 45 mg/L as NO3-. This study uses nitrate concentrations from several hundred irrigation, drinking water, and monitoring wells (Monterey County Water Resources Agency, 1997), along with tritium-helium groundwater ages acquired at Lawrence Livermore National Laboratory through the State of California Groundwater Monitoring and Assessment (GAMA) program (reported in Kulongoski et al., 2007 and in Moran et al., in press), to identify nitrate 'hot spots' in the deep aquifer and to examine possible modes of nitrate transport to the deep aquifer. In addition, observed apparent groundwater ages are compared with the results of transport simulations that use particle tracking and a stochastic-geostatistical framework to incorporate aquifer heterogeneity to determine the distribution of travel times from the water table to each well (Fogg et al., 1999). The combined evidence from nitrate, tritium, tritiogenic 3He, and radiogenic 4He concentrations, reveals complex recharge and flow to the capture zone of the deep drinking water wells. Widespread groundwater pumping for irrigation accelerates vertical groundwater flow such that high nitrate groundwater reaches some deep drinking water wells. Deeper portions of the wells often draw in water that recharged before agricultural activity began in the valley, while some shallower intervals draw in recycled irrigation water which can have a low tritium concentration but high nitrate concentration. The irrigation return water may take a decade or more to reach the water table, given that the vadose zone in some affected areas is more than 30 m deep, but downward migration is likely enhanced by preferential flow paths, plowing, crop removal, and sprinkler irrigation in surrounding fields. This work was performed under the auspices of the U.S. DOE by LLNL under Contract DE-AC52-07NA27344. Fogg et al., 1999, in AGU Geophysical Monograph 108. Kulongoski et al., 2007. USGS Data Series Report 167 Monterey County Water Agency, 1997. Water Resources Data Report (Water Year 1994-1995) Moran et al., 2011. California GAMA Special Study: Nitrate Fate and Transport in the Salinas Valley. LLNL, in press.

A training tool for visual aids. Using tracing techniques to create visual aids.

PubMed

Clark, M; Walters, J E; Wileman, R

1982-01-01

This training tool explains the use of tracing techniques to create visuals requiring few materials and no training of special skills in drawing. Magazines, books, posters, and many other materials contain photographs and drawings which can be used to create visual aids for health training and public health education. The materials required are pencils, an eraser, crayons or colored marking pens, paper clips, tracing and drawing paper, carbon paper, and sources of visual images. The procedure is described. The material was prepared by INTRAH staff members. Other materials include how to evaluate teaching, how to create a family health case study and training in group dynamics.

Application of ChemDraw NMR Tool: Correlation of Program-Generated 13C Chemical Shifts and pKa Values of para-Substituted Benzoic Acids

NASA Astrophysics Data System (ADS)

Wang, Hongyi

2005-09-01

An application of ChemDraw NMR Tool was demonstrated by correlation of program-generated 13 C NMR chemical shifts and p K a values of para-substituted benzoic acids. Experimental 13 C NMR chemical shifts were analyzed in the same way for comparison. The project can be used as an assignment at the end of the first-year organic chemistry course to review topics or explore new techniques: Hammett equation, acid base equilibrium theory, electronic nature of functional groups, inductive and resonance effects, structure reactivity relationship, NMR spectroscopy, literature search, database search, and ChemDraw software.

Slide shows vs graphic tablet live drawing for anatomy teaching.

PubMed

Alsaid, B

2016-12-01

Blackboard drawing is the traditional and still widely learned method for anatomy teachers. However, for practical reasons, more and more lessons are done using slide shows. New digital learning tools are developed to create a more attractive teaching method. The objective of this study was to compare the use of graphic tablet live drawing versus slide shows. Sixty-five second-year students of the Faculty of Medicine participated in this study during their first semester of 2013-2014 academic year. The selected lecture dealt about neuroanatomy; two brain sections were taught: median sagittal and transverse. The sagittal section was presented via a slide show. The transverse section was taught using a graphics tablet using drawing software. Students were evaluated three times: before the lecture, immediately after the lecture and 8 weeks later. Means were compared using a t-test. Scores were significantly higher immediately after the lecture and 8 weeks later tests in comparing the transverse section (using the graphics tablet) versus the sagittal section (using PowerPoint ® ). Student satisfaction regarding the use of the tablet was high. The graphics tablet is a usable and efficient drawing tool in anatomy teaching. This tool requires a specific teacher training and preparation. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

25. VIEW OF THE MACHINE TOOL LAYOUT IN ROOMS 244 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. VIEW OF THE MACHINE TOOL LAYOUT IN ROOMS 244 AND 296. MACHINES WERE USED FOR STAINLESS STEEL FABRICATION (THE J-LINE). THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

The Effects of Cryogenic Treatment on Cutting Tools

NASA Astrophysics Data System (ADS)

Kumar, Satish; Khedkar, Nitin K.; Jagtap, Bhushan; Singh, T. P.

2017-08-01

Enhancing the cutting tool life is important and economic factor to reduce the tooling as well as manufacturing cost. The tool life is improved considerably by 92 % after cryogenic treatment. The cryogenic treatment is a one-time permanent, sub-zero heat treatment that entirely changes cross-section of cutting tool. The cryogenic treatment is carried out with deep freezing of cutting tool materials to enhance physical and mechanical properties. The cryogenic treatment improves mechanical such as hardness, toughness and tribological properties such as wear resistance, coefficient of friction, surface finish, dimensional stability and stress relief. The deep cryogenic treatment is the most beneficial treatment applied on cutting tools. The cryogenic treatment is the most advanced heat treatment and popular to improve performance of the cutting tool. The optimization of cryogenic treatment variables is necessary to improve tool life. This study reviews the effects of cryogenic treatment on microstructure, tribological properties of tool steels and machining applications of cutting tool by investigating the surface and performing the surface characterization test like SEM. The economy of cutting tool can be achieved by deep cryogenic treatment.

Using Instruments as Applied Science, Multipurpose Tools During Human Exploration: An XRD/XRF Demonstration Strategy for the Deep Space Gateway

NASA Astrophysics Data System (ADS)

Bleacher, J. E.; Gendreau, K.; Arzoumanian, Z.; Young, K. E.; McAdam, A.

2018-02-01

Science instruments to be used during human exploration should be designed to serve as multipurpose tools that are of use throughout a mission. Here we discuss a multipurpose tool approach to using contact XRD/XRF onboard the Deep Space Gateway.

Drawing Students out: Using Sketching Exercises to Hone Observation Skills

ERIC Educational Resources Information Center

Weekes, Harry

2005-01-01

In this article, the author discusses how drawing exercise can be an invaluable tool in teaching Biology classes. The author uses drawing exercises and requires students to sketch everything from prepared slides of mitosis and plant anatomy to field sightings of birds and protists. His primary goal in integrating art into science is to hone…

8-Step Model Drawing: Singapore's Best Problem-Solving MATH Strategies

ERIC Educational Resources Information Center

Hogan, Bob; Forsten, Char

2007-01-01

In this book, Bob Hogan and Char Forsten introduce American mathematics educators to the model drawing process adapted from the much-acclaimed Singapore approach. They explain what model drawing is and why it's such an effective problem-solving tool. They show exactly how teachers can guide their students through the process, tell which key points…

NETIMIS: Dynamic Simulation of Health Economics Outcomes Using Big Data.

PubMed

Johnson, Owen A; Hall, Peter S; Hulme, Claire

2016-02-01

Many healthcare organizations are now making good use of electronic health record (EHR) systems to record clinical information about their patients and the details of their healthcare. Electronic data in EHRs is generated by people engaged in complex processes within complex environments, and their human input, albeit shaped by computer systems, is compromised by many human factors. These data are potentially valuable to health economists and outcomes researchers but are sufficiently large and complex enough to be considered part of the new frontier of 'big data'. This paper describes emerging methods that draw together data mining, process modelling, activity-based costing and dynamic simulation models. Our research infrastructure includes safe links to Leeds hospital's EHRs with 3 million secondary and tertiary care patients. We created a multidisciplinary team of health economists, clinical specialists, and data and computer scientists, and developed a dynamic simulation tool called NETIMIS (Network Tools for Intervention Modelling with Intelligent Simulation; http://www.netimis.com ) suitable for visualization of both human-designed and data-mined processes which can then be used for 'what-if' analysis by stakeholders interested in costing, designing and evaluating healthcare interventions. We present two examples of model development to illustrate how dynamic simulation can be informed by big data from an EHR. We found the tool provided a focal point for multidisciplinary team work to help them iteratively and collaboratively 'deep dive' into big data.

MusiteDeep: a deep-learning framework for general and kinase-specific phosphorylation site prediction.

PubMed

Wang, Duolin; Zeng, Shuai; Xu, Chunhui; Qiu, Wangren; Liang, Yanchun; Joshi, Trupti; Xu, Dong

2017-12-15

Computational methods for phosphorylation site prediction play important roles in protein function studies and experimental design. Most existing methods are based on feature extraction, which may result in incomplete or biased features. Deep learning as the cutting-edge machine learning method has the ability to automatically discover complex representations of phosphorylation patterns from the raw sequences, and hence it provides a powerful tool for improvement of phosphorylation site prediction. We present MusiteDeep, the first deep-learning framework for predicting general and kinase-specific phosphorylation sites. MusiteDeep takes raw sequence data as input and uses convolutional neural networks with a novel two-dimensional attention mechanism. It achieves over a 50% relative improvement in the area under the precision-recall curve in general phosphorylation site prediction and obtains competitive results in kinase-specific prediction compared to other well-known tools on the benchmark data. MusiteDeep is provided as an open-source tool available at https://github.com/duolinwang/MusiteDeep. xudong@missouri.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Perceptual Drawing as a Learning Tool in a College Biology Laboratory

ERIC Educational Resources Information Center

Landin, Jennifer

2011-01-01

The use of drawing in the classroom has a contentious history in the U.S. education system. While most instructors and students agree that the activity helps students focus and observe more details, there is a lack of empirical data to support these positions. This study examines the use of three treatments (writing a description, drawing a…

Do Computers Improve the Drawing of a Geometrical Figure for 10 Year-Old Children?

ERIC Educational Resources Information Center

Martin, Perrine; Velay, Jean-Luc

2012-01-01

Nowadays, computer aided design (CAD) is widely used by designers. Would children learn to draw more easily and more efficiently if they were taught with computerised tools? To answer this question, we made an experiment designed to compare two methods for children to do the same drawing: the classical "pen and paper" method and a CAD…

Patient Safety—Incorporating Drawing Software into Root Cause Analysis Software

PubMed Central

Williams, Linda; Grayson, Diana; Gosbee, John

2001-01-01

Drawing software from Lassalle Technologies1 (France) designed for Visual Basic is the tool we used to standardize the creation, storage, and retrieval of flow diagrams containing information about adverse events and close calls.

Patient Safety—Incorporating Drawing Software into Root Cause Analysis Software

PubMed Central

Williams, Linda; Grayson, Diana; Gosbee, John

2002-01-01

Drawing software from Lassalle Technologies1 (France) designed for Visual Basic is the tool we used to standardize the creation, storage, and retrieval of flow diagrams containing information about adverse events and close calls.

Geometric Form Drawing: A Perceptual-Motor Approach to Preventive Remediation (The Steiner Approach)

ERIC Educational Resources Information Center

Ogletree, Earl J.

1975-01-01

Provided is a rationale for geometric form drawing developed by Rudolf Steiner as a tool to develop motor coordination, perceptual skills, and cognition for mentally retarded and perceptually handicapped children. (Author/CL)

STOPDVTs: Development and testing of a clinical assessment tool to guide nursing assessment of postoperative patients for Deep Vein Thrombosis.

PubMed

O'Brien, Alanna; Redley, Bernice; Wood, Beverley; Botti, Mari; Hutchinson, Anastasia F

2018-03-01

To develop and test a clinical tool to guide nurses' assessment of postoperative patients for Deep Vein Thrombosis. Preventing venous thromboembolism in hospitalised patients is an international patient safety priority. Despite high-level evidence for optimal venous thromboembolism prophylaxis, implementation is inconsistent and the incidence of Deep Vein Thrombosis remains high. A two-stage sequential multi-method design was used. In stage 1, the STOPDVTs tool was developed using a review of the literature and focus groups with local clinical experts. Stage 2 involved pilot testing the tool with 38 surgical nurses who conducted repeated assessments on a prospective sample of 50 postoperative orthopaedic patients. Stage 1: The focus group members who were members of the nursing leadership team agreed on eight local and systemic signs and symptoms that should be included in a nursing patient assessment tool for early Deep Vein Thrombosis. Local symptoms were pain in the limbs, calf swelling and tightness, changes in the affected limb's skin temperature. Systemic signs included in the tool were as follows: increased shortness of breath, increased respiratory and heart rates, and decreased oxygen saturation. Stage 2: The STOPDVTs tool had acceptable face and content validity, the agreement between the expert nurse and surgical nurses on assessments of individual signs and symptoms varied between 44%-94%. Surgical nurses were less likely than the expert nurse to identify signs indicative of Deep Vein Thrombosis. Despite finding the STOPDVTs clinical assessment tool was a useful guide for nursing assessment, surgical nurses often underestimated the potential importance of clinical signs. The findings reveal a gap in nursing knowledge and skill in assessing for Deep Vein Thrombosis in postoperative orthopaedic patients. This study identified a possible risk to patient safety related to under-recognition of the signs and symptoms of possible Deep Vein Thrombosis (DVT) in postoperative orthopaedic patients. The findings demonstrate the feasibility of developing and implementing a protocol for consistent screening by nurses for possible DVT in the postoperative period. © 2018 John Wiley & Sons Ltd.

Rising to the challenge: Deep acting is more beneficial when tasks are appraised as challenging.

PubMed

Huang, Jason L; Chiaburu, Dan S; Zhang, Xin-an; Li, Ning; Grandey, Alicia A

2015-09-01

Cumulative research indicates that deep acting has a nonsignificant relationship with employee exhaustion, despite arguments that deep acting can be beneficial. To illuminate when deep acting leads to more positive employee outcomes, we draw on the resource conservation perspective to propose a within-individual model of deep acting that focuses on service employees' daily fluctuation of emotional labor and emotional exhaustion. Specifically, we propose that the ongoing experience of felt challenge is a within-person boundary condition that moderates deep acting's relationship with emotional exhaustion, and model emotional exhaustion as a mediating mechanism that subsequently predicts momentary job satisfaction and daily customer conflict handling. Using an experience sampling design, we collected data from 84 service employees over a 3-week period. Deep acting was less emotionally exhausting for service providers when they saw their tasks as more challenging. Furthermore, emotional exhaustion mediated the deep acting by felt challenge interaction effect on momentary job satisfaction and daily customer conflict handling. The findings contribute to a better understanding of the deep acting experience at work, while highlighting customer conflict handling as a key behavioral outcome of emotional labor. (c) 2015 APA, all rights reserved).

Alignment Pins for Assembling and Disassembling Structures

NASA Technical Reports Server (NTRS)

Campbell, Oliver C.

2008-01-01

Simple, easy-to-use, highly effective tooling has been devised for maintaining alignment of bolt holes in mating structures during assembly and disassembly of the structures. The tooling was originally used during removal of a body flap from the space shuttle Atlantis, in which misalignments during removal of the last few bolts could cause the bolts to bind in their holes. By suitably modifying the dimensions of the tooling components, the basic design of the tooling can readily be adapted to other structures that must be maintained in alignment. The tooling includes tapered, internally threaded alignment pins designed to fit in the bolt holes in one of the mating structures, plus a draw bolt and a cup that are used to install or remove each alignment pin. In preparation for disassembly of two mating structures, external supports are provided to prevent unintended movement of the structures. During disassembly of the structures, as each bolt that joins the structures is removed, an alignment pin is installed in its place. Once all the bolts have been removed and replaced with pins, the pins maintain alignment as the structures are gently pushed or pulled apart on the supports. In assembling the two structures, one reverses the procedure described above: pins are installed in the bolt holes, the structures are pulled or pushed together on the supports, then the pins are removed and replaced with bolts. The figure depicts the tooling and its use. To install an alignment pin in a bolt hole in a structural panel, the tapered end of the pin is inserted from one side of the panel, the cup is placed over the pin on the opposite side of the panel, the draw bolt is inserted through the cup and threaded into the pin, the draw bolt is tightened to pull the pin until the pin is seated firmly in the hole, then the draw bolt and cup are removed, leaving the pin in place. To remove an alignment pin, the cup is placed over the pin on the first-mentioned side of the panel, the draw bolt is inserted through the cup and threaded into the pin, then the draw bolt is tightened to pull the pin out of the hole.

Formability of dual-phase steels in deep drawing of rectangular parts: Influence of blank thickness and die radius

NASA Astrophysics Data System (ADS)

López, Ana María Camacho; Regueras, José María Gutiérrez

2017-10-01

The new goals of automotive industry related with environment concerns, the reduction of fuel emissions and the security requirements have driven up to new designs which main objective is reducing weight. It can be achieved through new materials such as nano-structured materials, fibre-reinforced composites or steels with higher strength, among others. Into the last group, the Advance High Strength Steels (AHSS) and particularly, dual-phase steels are in a predominant situation. However, despite of their special characteristics, they present issues related to their manufacturability such as springback, splits and cracks, among others. This work is focused on the deep drawing processof rectangular shapes, a very usual forming operation that allows manufacturing several automotive parts like oil pans, cases, etc. Two of the main parameters in this process which affect directly to the characteristics of final product are blank thickness (t) and die radius (Rd). Influence of t and Rd on the formability of dual-phase steels has been analysed considering values typically used in industrial manufacturing for a wide range of dual-phase steels using finite element modelling and simulation; concretely, the influence of these parameters in the percentage of thickness reduction pt(%), a quite important value for manufactured parts by deep drawing operations, which affects to its integrity and its service behaviour. Modified Morh Coulomb criteria (MMC) has been used in order to obtain Fracture Forming Limit Diagrams (FFLD) which take into account an important failure mode in dual-phase steels: shear fracture. Finally, a relation between thickness reduction percentage and studied parameters has been established fordual-phase steels, obtaining a collection of equations based on Design of Experiments (D.O.E) technique, which can be useful in order to predict approximate results.

Collaborative Aerial-Drawing System for Supporting Co-Creative Communication

NASA Astrophysics Data System (ADS)

Osaki, Akihiro; Taniguchi, Hiroyuki; Miwa, Yoshiyuki

This paper describes the collaborative augmented reality (AR) system with which multiple users can handwrite 3D lines in the air simultaneously and manipulate the lines directly in the real world. In addition, we propose a new technique for co-creative communication utilizing the 3D drawing activity. Up to now, the various 3D user interfaces have been proposed. Although most of them aim to solve the specific problems in the virtual environments, the possibility of the 3D drawing expression has not been explored yet. Accordingly, we paid special attention to the interaction with the real objects in daily life, and considered to manipulate real objects and 3D lines without any distinctions by the same action. The developed AR system consists of a stereoscopic head-mounted display, a drawing tool, 6DOF sensors measuring three-dimensional position and Euler angles, and the 3D user interface, which enables to push, grasp and pitch 3D lines directly by use of the drawing tool. Additionally users can pick up desired color from either a landscape or a virtual line through the direct interaction with this tool. For sharing 3D lines among multiple users at the same place, the distributed-type AR system has been developed that mutually sends and receives drawn data between systems. With the developed system, users can proceed to design jointly in the real space through arranging each 3D drawing by direct manipulation. Moreover, a new application to the entertainment has become possible to play sports like catch, fencing match, or the like.

A study with ESI PAM-STAMP® on the influence of tool deformation on final part quality during a forming process

NASA Astrophysics Data System (ADS)

Vrolijk, Mark; Ogawa, Takayuki; Camanho, Arthur; Biasutti, Manfredi; Lorenz, David

2018-05-01

As a result from the ever increasing demand to produce lighter vehicles, more and more advanced high-strength materials are used in automotive industry. Focusing on sheet metal cold forming processes, these materials require high pressing forces and exhibit large springback after forming. Due to the high pressing forces deformations occur in the tooling geometry, introducing dimensional inaccuracies in the blank and potentially impact the final springback behavior. As a result the tool deformations can have an impact on the final assembly or introduce cosmetic defects. Often several iterations are required in try-out to obtain the required tolerances, with costs going up to as much as 30% of the entire product development cost. To investigate the sheet metal part feasibility and quality, in automotive industry CAE tools are widely used. However, in current practice the influence of the tool deformations on the final part quality is generally neglected and simulations are carried out with rigid tools to avoid drastically increased calculation times. If the tool deformation is analyzed through simulation it is normally done at the end of the drawing prosses, when contact conditions are mapped on the die structure and a static analysis is performed to check the deflections of the tool. But this method does not predict the influence of these deflections on the final quality of the part. In order to take tool deformations into account during drawing simulations, ESI has developed the ability to couple solvers efficiently in a way the tool deformations can be real-time included in the drawing simulation without high increase in simulation time compared to simulations with rigid tools. In this paper a study will be presented which demonstrates the effect of tool deformations on the final part quality.

Study on Ultra-deep Azimuthal Electromagnetic Resistivity LWD Tool by Influence Quantification on Azimuthal Depth of Investigation and Real Signal

NASA Astrophysics Data System (ADS)

Li, Kesai; Gao, Jie; Ju, Xiaodong; Zhu, Jun; Xiong, Yanchun; Liu, Shuai

2018-05-01

This paper proposes a new tool design of ultra-deep azimuthal electromagnetic (EM) resistivity logging while drilling (LWD) for deeper geosteering and formation evaluation, which can benefit hydrocarbon exploration and development. First, a forward numerical simulation of azimuthal EM resistivity LWD is created based on the fast Hankel transform (FHT) method, and its accuracy is confirmed under classic formation conditions. Then, a reasonable range of tool parameters is designed by analyzing the logging response. However, modern technological limitations pose challenges to selecting appropriate tool parameters for ultra-deep azimuthal detection under detectable signal conditions. Therefore, this paper uses grey relational analysis (GRA) to quantify the influence of tool parameters on voltage and azimuthal investigation depth. After analyzing thousands of simulation data under different environmental conditions, the random forest is used to fit data and identify an optimal combination of tool parameters due to its high efficiency and accuracy. Finally, the structure of the ultra-deep azimuthal EM resistivity LWD tool is designed with a theoretical azimuthal investigation depth of 27.42-29.89 m in classic different isotropic and anisotropic formations. This design serves as a reliable theoretical foundation for efficient geosteering and formation evaluation in high-angle and horizontal (HA/HZ) wells in the future.

Authenticity and autonomy in deep-brain stimulation.

PubMed

Wardrope, Alistair

2014-08-01

Felicitas Kraemer draws on the experiences of patients undergoing deep-brain stimulation (DBS) to propose two distinct and potentially conflicting principles of respect: for an individual's autonomy (interpreted as mental competence), and for their authenticity. I argue instead that, according to commonly-invoked justifications of respect for autonomy, authenticity is itself in part constitutive of an analysis of autonomy worthy of respect; Kraemer's argument thus highlights the shortcomings of practical applications of respect for autonomy that emphasise competence while neglecting other important dimensions of autonomy such as authenticity, since it shows that competence alone cannot be interpreted as a reliable indicator of an individual's capacity for exercising autonomy. I draw from relational accounts to suggest how respect for a more expansive conception of autonomy might be interpreted for individuals undergoing DBS and in general. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

In-Situ-measurement of restraining forces during forming of rectangular cups

NASA Astrophysics Data System (ADS)

Singer, M.; Liewald, M.

2016-11-01

This contribution introduces a new method for evaluating the restraining forces during forming of rectangular cups with the goal of eliminating the disadvantages of the currently used scientifically established measurement procedures. With this method forming forces are measured indirectly by the elastic deformation of die structure caused by locally varying tribological system. Therefore, two sensors were integrated into the punch, which measure the restraining forces during the forming process. Furthermore, it was possible to evaluate the effects of different lubricants showing the time dependent trend as a function of stroke during the forming of the materials DP600 and DC04. A main advantage of this testing method is to get real friction corresponding data out of the physical deep drawing process as well as the measurement of real acting restraining forces at different areas of the deep drawing part by one single test. Measurement results gained by both sensors have been integrated into LS-Dyna simulation in which the coefficient of friction was regarded as a function of time. The simulated and deep drawn parts afterwards are analysed and compared to specific areas with regard to locally measured thickness of part. Results show an improvement of simulation quality when using locally varying, time dependent coefficients of friction compared to commonly used constant values.

Actual drawing of histological images improves knowledge retention.

PubMed

Balemans, Monique C M; Kooloos, Jan G M; Donders, A Rogier T; Van der Zee, Catharina E E M

2016-01-01

Medical students have to process a large amount of information during the first years of their study, which has to be retained over long periods of nonuse. Therefore, it would be beneficial when knowledge is gained in a way that promotes long-term retention. Paper-and-pencil drawings for the uptake of form-function relationships of basic tissues has been a teaching tool for a long time, but now seems to be redundant with virtual microscopy on computer-screens and printers everywhere. Several studies claimed that, apart from learning from pictures, actual drawing of images significantly improved knowledge retention. However, these studies applied only immediate post-tests. We investigated the effects of actual drawing of histological images, using randomized cross-over design and different retention periods. The first part of the study concerned esophageal and tracheal epithelium, with 384 medical and biomedical sciences students randomly assigned to either the drawing or the nondrawing group. For the second part of the study, concerning heart muscle cells, students from the previous drawing group were now assigned to the nondrawing group and vice versa. One, four, and six weeks after the experimental intervention, the students were given a free recall test and a questionnaire or drawing exercise, to determine the amount of knowledge retention. The data from this study showed that knowledge retention was significantly improved in the drawing groups compared with the nondrawing groups, even after four or six weeks. This suggests that actual drawing of histological images can be used as a tool to improve long-term knowledge retention. © 2015 American Association of Anatomists.

Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

NASA Astrophysics Data System (ADS)

Gil, Imanol; Galdos, Lander; Mendiguren, Joseba; Mugarra, Endika; Sáenz de Argandoña, Eneko

2016-10-01

This research studies the effect of considering an advanced variable friction coefficient on the springback prediction of stamping processes. Traditional constant coefficient of friction considerations are being replaced by more advanced friction coefficient definitions. The aim of this work is to show the influence of defining a pressure dependent friction coefficient on numerical springback predictions of a DX54D mild steel, a HSLA380 and a DP780 high strength steel. The pressure dependent friction model of each material was fitted to the experimental data obtained by Strip Drawing tests. Then, these friction models were implemented in a numerical simulation of a drawing process of an industrial automotive part. The results showed important differences between defining a pressure dependent friction coefficient or a constant friction coefficient.

Experimental analysis of the sheet metal forming behavior of newly developed press hardening steels

NASA Astrophysics Data System (ADS)

Meza-García, Enrique; Kräusel, Verena; Landgrebe, Dirk

2018-05-01

The aim of this work was the characterization of the newly developed press hardening sheet alloys 1800 PHS and 2000 PHS developed by SSAB with regard to their hot forming behavior on the basis of the experimental determination of relevant mechanical and technological properties. For this purpose conventional and non-conventional sheet metal testing methods were used. To determine the friction coefficient, the strip drawing test was applied, while the deep drawing cup test was used to determine the maximum draw depth. Finally, a V-bending test was carried out to evaluate the springback behavior of the investigated alloys by varying the blank temperature and quenching media. This work provides a technological guideline for the production of press hardened sheet parts made of these investigated sheet metals.

Paper Tools and Periodic Tables: Newlands and Mendeleev Draw Grids.

PubMed

Gordin, Michael D

2018-02-01

This essay elaborates on Ursula Klein's methodological concept of "paper tools" by drawing on several examples from the history of the periodic table. Moving from John A. R. Newlands's "Law of Octaves," to Dmitrii Mendeleev's first drafts of his periodic system in 1869, to Mendeleev's chemical speculations on the place of the ether within his classification, one sees that the ways in which the scientists presented the balance between empirical data and theoretical manipulation proved crucial for the chemical community's acceptance or rejection of their proposed innovations. This negotiated balance illustrates an underemphasised feature of Klein's conceptualisation of the ways in which a paper tool generates new knowledge.

Fishing tool retrieves MWD nuclear source from deep well

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

A new wire line tool has successfully retrieved the nuclear sources and formation data from a measurement-while-drilling (MWD) tool stuck in a deep, highly deviated well in the Gulf of Mexico. On Nov. 8, 1993, Schlumberger Wireline and Testing and Anadrill ran a logging-while-drilling inductive coupling (LINC) tool on conventional wire line to fish the gamma ray and neutron sources from a compensated density neutron (CDN) tool stuck in a well at 19,855 ft with an inclination greater than 80[degree]. The paper briefly describes the operation and equipment.

Facial expression drawings and the full cup test: valid tools for the measurement of swelling after dental surgery.

PubMed

Al-Samman, A A; Othman, H A

2017-01-01

Assessment of postoperative swelling is subjective and depends on the patient's opinion. The aim of this study was to evaluate the validity of facial expression drawings and the full cup test and to compare their performance with that of other scales in measuring postoperative swelling. Fifty patients who had one of several procedures were included. All patients were asked to fill in a form for six days postoperatively (including the day of operation) that contained four scales to rate the amount of swelling: facial expression drawings, the full cup test, the visual analogue scale (VAS), and the verbal rating scale (VRS). Seven patients did not know how to use some of the scales. However, all patients successfully used the facial expression drawings. There was a significant difference between the scale that patients found easiest to use and the others (p<0.008). Fourteen patients selected facial expression drawings and five the VRS. The results showed that the correlations between the scales were good (p<0.01). Facial expression drawings and the full cup test are valid tools and could be used to assess postoperative swelling interchangeably with other scales for rating swelling, and some patients found facial expression drawings were the easiest to use. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Surface EMG signals based motion intent recognition using multi-layer ELM

NASA Astrophysics Data System (ADS)

Wang, Jianhui; Qi, Lin; Wang, Xiao

2017-11-01

The upper-limb rehabilitation robot is regard as a useful tool to help patients with hemiplegic to do repetitive exercise. The surface electromyography (sEMG) contains motion information as the electric signals are generated and related to nerve-muscle motion. These sEMG signals, representing human's intentions of active motions, are introduced into the rehabilitation robot system to recognize upper-limb movements. Traditionally, the feature extraction is an indispensable part of drawing significant information from original signals, which is a tedious task requiring rich and related experience. This paper employs a deep learning scheme to extract the internal features of the sEMG signals using an advanced Extreme Learning Machine based auto-encoder (ELMAE). The mathematical information contained in the multi-layer structure of the ELM-AE is used as the high-level representation of the internal features of the sEMG signals, and thus a simple ELM can post-process the extracted features, formulating the entire multi-layer ELM (ML-ELM) algorithm. The method is employed for the sEMG based neural intentions recognition afterwards. The case studies show the adopted deep learning algorithm (ELM-AE) is capable of yielding higher classification accuracy compared to the Principle Component Analysis (PCA) scheme in 5 different types of upper-limb motions. This indicates the effectiveness and the learning capability of the ML-ELM in such motion intent recognition applications.

[Drawing, a tool to use with unaccompanied foreign minors].

PubMed

Touhami, Fatima; Minassian, Sevan; Radjack, Rahmeth; Moro, Marie Rose

Supporting unaccompanied foreign minors requires a different clinical approach. These youngsters must be given individualised support to help them make the transition from exile and loss, to an existence as an individual, yet still a son or daughter. The drawing, as a transcultural and atemporal imprint, constitutes a tool enabling these young people to bring to the surface their unconscious thought processes, to exist and to come into being with dignity. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon

NASA Astrophysics Data System (ADS)

Kühn, R.; Berger, T.; Prieske, M.; Börner, R.; Hackert-Oschätzchen, M.; Zeidler, H.; Schubert, A.

2017-10-01

In metal forming, lubricants have to be used to prevent corrosion or to reduce friction and tool wear. From an economical and ecological point of view, the aim is to avoid the usage of lubricants. For dry deep drawing of aluminum sheets it is intended to apply locally micro-structured wear-resistant carbon based coatings onto steel tools. One type of these coatings are diamond layers prepared by chemical vapor deposition (CVD). Due to the high strength of diamond, milling processes are unsuitable for micro-structuring of these layers. In contrast to this, micro electrical discharge machining (micro EDM) is a suitable process for micro-structuring CVD-diamond layers. Due to its non-contact nature and its process principle of ablating material by melting and evaporating, it is independent of the hardness, brittleness or toughness of the workpiece material. In this study the deposition and micro electrical discharge machining of silicon incorporated CVD-diamond (Si-CVD-diamond) layers were presented. For this, 10 µm thick layers were deposited on molybdenum plates by a laser-induced plasma CVD process (LaPlas-CVD). For the characterization of the coatings RAMAN- and EDX-analyses were conducted. Experiments in EDM were carried out with a tungsten carbide tool electrode with a diameter of 90 µm to investigate the micro-structuring of Si-CVD-diamond. The impact of voltage, discharge energy and tool polarity on process speed and resulting erosion geometry were analyzed. The results show that micro EDM is a suitable technology for micro-structuring of silicon incorporated CVD-diamond layers.

Innovation & evaluation of tangible direct manipulation digital drawing pens for children.

PubMed

Lee, Tai-Hua; Wu, Fong-Gong; Chen, Huei-Tsz

2017-04-01

Focusing on the theme of direct manipulation, in this study, we proposed a new and innovative tangible user interface (TUI) design concept for a manipulative digital drawing pen. Based on interviews with focus groups brainstorming and experts and the results of a field survey, we selected the most suitable tangible user interface for children between 4 and 7 years of age. Using the new tangible user interface, children could choose between the brush tools after touching and feeling the various patterns. The thickness of the brush could be adjusted by changing the tilt angle. In a subsequent experimental process we compared the differences in performance and subjective user satisfaction. A total of sixteen children, aged 4-7 years participated in the experiment. Two operating system experiments (the new designed tangible digital drawing pen and traditional visual interface-icon-clicking digital drawing pens) were performed at random and in turns. We assessed their manipulation performance, accuracy, brush stroke richness and subjective evaluations. During the experimental process we found that operating functions using the direct manipulation method, and adding shapes and semantic models to explain the purpose of each function, enabled the children to perform stroke switches relatively smoothly. By using direct manipulation digital pens, the children could improve their stroke-switching performance for digital drawing. Additionally, by using various patterns to represent different brushes or tools, the children were able to make selections using their sense of touch, thereby reducing the time required to move along the drawing pens and select icons (The significant differences (p = 0.000, p < 0.01) existed in the manipulation times for drawing thick lines using the crayon function of the two (new and old) drawing pens (new 5.8750 < old 10.7500)). The addition of direct manipulation movements to drawing operations enhanced the drawing results, thereby increasing the children's enjoyment of drawing with tangible digital drawing pens. Copyright © 2016 Elsevier Ltd. All rights reserved.

The synaptic pharmacology underlying sensory processing in the superior colliculus.

PubMed

Binns, K E

1999-10-01

The superior colliculus (SC) is one of the most ancient regions of the vertebrate central sensory system. In this hub afferents from several sensory pathways converge, and an extensive range of neural circuits enable primary sensory processing, multi-sensory integration and the generation of motor commands for orientation behaviours. The SC has a laminar structure and is usually considered in two parts; the superficial visual layers and the deep multi-modal/motor layers. Neurones in the superficial layers integrate visual information from the retina, cortex and other sources, while the deep layers draw together data from many cortical and sub-cortical sensory areas, including the superficial layers, to generate motor commands. Functional studies in anaesthetized subjects and in slice preparations have used pharmacological tools to probe some of the SC's interacting circuits. The studies reviewed here reveal important roles for ionotropic glutamate receptors in the mediation of sensory inputs to the SC and in transmission between the superficial and deep layers. N-methyl-D-aspartate receptors appear to have special responsibility for the temporal matching of retinal and cortical activity in the superficial layers and for the integration of multiple sensory data-streams in the deep layers. Sensory responses are shaped by intrinsic inhibitory mechanisms mediated by GABA(A) and GABA(B) receptors and influenced by nicotinic acetylcholine receptors. These sensory and motor-command activities of SC neurones are modulated by levels of arousal through extrinsic connections containing GABA, serotonin and other transmitters. It is possible to naturally stimulate many of the SC's sensory and non-sensory inputs either independently or simultaneously and this brain area is an ideal location in which to study: (a) interactions between inputs from the same sensory system; (b) the integration of inputs from several sensory systems; and (c) the influence of non-sensory systems on sensory processing.

Teaching Flowers: A Photo Essay

ERIC Educational Resources Information Center

Hewson, Federico

2017-01-01

"Teaching Flowers" reflects on humanity's deep connections to horticulture by gathering varied thoughts from seminal writers in the field. In addition, this visual article draws attention to labor issues within the U.S. floral industry by documenting the author's exploration of flowers as social sculpture in New York City.

Phonetics and Other Disciplines: Then and Now.

ERIC Educational Resources Information Center

Bronstein, Arthur J.; Raphael, Lawrence J.

Phonetic science is becoming increasingly interdisciplinary. Phoneticians rely on, or at least collaborate with, sociologists, psychologists, biologists, poets, physicists, anthropologists, neurologists and others. A look at the history of phonetics reveals that this seemingly recent trend has deep roots. In fact, it is possible to draw parallels…

Thinking big

NASA Astrophysics Data System (ADS)

Collins, Harry

2008-02-01

Physicists are often quick to discount social research based on qualitative techniques such as ethnography and "deep case studies" - where a researcher draws conclusions about a community based on immersion in the field - thinking that only quantitative research backed up by statistical analysis is sound. The balance is not so clear, however.

Finding Meaning: Sense Inventories for Improved Word Sense Disambiguation

ERIC Educational Resources Information Center

Brown, Susan Windisch

2010-01-01

The deep semantic understanding necessary for complex natural language processing tasks, such as automatic question-answering or text summarization, would benefit from highly accurate word sense disambiguation (WSD). This dissertation investigates what makes an appropriate and effective sense inventory for WSD. Drawing on theories and…

The Impact of Data Fragmentation on High-Throughput Clinical Phenotyping

ERIC Educational Resources Information Center

Wei, Weiqi

2012-01-01

Subject selection is essential and has become the rate-limiting step for harvesting knowledge to advance healthcare through clinical research. Present manual approaches inhibit researchers from conducting deep and broad studies and drawing confident conclusions. High-throughput clinical phenotyping (HTCP), a recently proposed approach, leverages…

Wilderness Vision Quest: A Journey of Transformation.

ERIC Educational Resources Information Center

Brown, Michael H.

The Wilderness Vision Quest is an outdoor retreat which helps participants touch, explore, and develop important latent human resources such as imagination, intuition, creativity, inspiration, and insight. Through the careful and focused use of techniques such as deep relaxation, reflective writing, visualization, guided imagery, symbolic drawing,…

Catholic Education: From and for Faith

ERIC Educational Resources Information Center

Groome, Thomas

2014-01-01

Catholic education arises from the deep structures and earliest traditions of Christian faith. Its commitments throughout the centuries have been to educate both "from" and "for" faith. It educates from a faith perspective by drawing upon the universal values of Catholicism to provide a distinctive philosophy, perhaps even more…

DEVELOPMENT OF IMPROVED FABRICATION METHODS, PROCESS AND TECHNIQUES FOR PRODUCING TYPICAL AIRCRAFT SHAPES FROM BERYLLIUM. Interim Technical Documentary Progress Report for the Period ending October 31, 1962

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, R.G.; Siergiej, J.M.

1962-12-28

In a program to develop a complete manufacturing process for ihe production of beryllium channels, techniques are being sought for drawing to obtain a flnal product meeting specifications more rigorous than are obtainable by direct extrusion. Progress in designing and procuring the special tooling required to draw complex shapes at elevated temperature is described, and the flrst set of draw dies is evaluated with respect to design and quality. Three experimental draw attempts have been made on U-channels, in addition to draw tests on flats. (auth)

Application of shell elements in simulation of cans ironing

NASA Astrophysics Data System (ADS)

Andrianov, A. V.; Erisov, Y. A.; Aryshensky, E. V.; Aryshensky, V. Y.

2017-01-01

In the present study, the special shell finite elements are used to simulate the drawing with high ironing ratio of aluminum beverage cans. These elements are implemented in commercial software complex PAM-STAMP 2G by means of T.T.S. normal stress option, which is used for ironing to describe well normal stress. By comparison of simulation and experimental data, it is shown that shell elements with T.T.S. option are capable to provide accurate simulation of deep drawing and ironing. The error of can thickness and height computation agrees with the engineering computation accuracy.

a Walk Through Earth's Time

NASA Astrophysics Data System (ADS)

Turrin, B. D.; Turrin, M.

2012-12-01

After "What is this rock?" the most common questions that is asked of Geologists is "How old is this rock/fossil?" For geologists considering ages back to millions of years is routine. Sorting and cataloguing events into temporal sequences is a natural tendency for all humans. In fact, it is an everyday activity for humans, i.e., keeping track of birthdays, anniversaries, appointments, meetings, AGU abstract deadlines etc… However, the time frames that are most familiar to the non scientist (seconds, minutes, hours, days, years) generally extend to only a few decades or at most centuries. Yet the vast length of time covered by Earth's history, 4.56 billion years, greatly exceeds these timeframes and thus is commonly referred to as "Deep Time". This is a challenging concept for most students to comprehend as it involves temporal and abstract thinking, yet it is key to their successful understanding of numerous geologic principles. We have developed an outdoor learning activity for general Introductory Earth Science courses that incorporates several scientific and geologic concepts such as: linear distance or stratigraphic thickness representing time, learning about major events in Earth's history and locating them in a scaled temporal framework, field mapping, abstract thinking, scaling and dimensional analysis, and the principles of radio isotopic dating. The only supplies needed are readily available in local hardware stores i.e. a 300 ft. surveyor's tape marked in feet, and tenths and hundredths of a foot, and the student's own introductory geology textbook. The exercise employs a variety of pedagogical learning modalities, including traditional lecture-based, the use of Art/Drawing, use of Visualization, Collaborative learning, and Kinesthetic and Experiential learning. Initially the students are exposed to the concept of "Deep Time" in a short conventional introductory lecture; this is followed by a 'field day'. Prior to the field exercise, students work with their textbook selecting events is Earth History that they find interesting. Using the textbook and online resources they then draw figures that represent these events. The drawing exercise reinforces the learning by having students visualize (imprinting an image) of these geologic events. Once the students have produced their drawings, the outdoor field exercise follows. Working collaboratively, the students measure and lay out a scaled linear model representing 4.56 billion years of geologic time. They then organize and place their drawings in the proper sequence on the temporal model that they have created. Once all the drawings are in place they are able to visualize the expanse of time in Earth's history. Through comparing results from a pre-test to those from a post-test we can show the gains in student understanding of Deep Time, a concept that is central to many of our geologic understandings.

Rock Abrasion Tool Exhibits the Deep Red Pigment of Mars

NASA Image and Video Library

2006-07-21

This image shows the round, metallic working end of the rock abrasion tool at the end of a metallic cylinder. The flat grinding face, attached brush, and much of the smooth, metallic exterior of cylinder are covered with a deep reddish-brown layer of dust

Existential anxiety and growth: an exploration of computerized drawings and perspectives of children and adolescents with cancer.

PubMed

Woodgate, Roberta L; West, Christina H; Tailor, Ketan

2014-01-01

Until now, most existentially focused cancer research has been conducted within adult populations. Only a handful of qualitative investigations have captured the experiences of children with cancer relative to themes such as existential fear and finitude, meaning/meaninglessness, uncertainty, authenticity, and inauthenticity. This article aimed to provide a deeper understanding of the existential challenges faced by children living with cancer. An interpretive, descriptive qualitative research approach was used. Thirteen children (8-17 years) undergoing treatment for cancer participated. Children participated in individual open-ended interviews and also had the opportunity to journal their experiences in a computerized drawing tool. The 4 main themes that emerged in relation to the existential challenges experienced by children with cancer included (1) existential worry, (2) existential vacuum, (3) existential longing, and (4) existential growth. The drawing tool within the computer diary was found to be particularly beneficial in assisting children to express the existential challenges that they had previously been unable to articulate in words. Children moved between existential anxiety and existential growth within the cancer world. The expressive means of drawing pictures gave children a therapeutic space to explore and work at understanding the existential challenges experienced. This research provides evidence that the active engagement of children's imaginations through the use of a computer-drawing tool may have significant therapeutic value for children with cancer. As well, the findings support the importance of nurses "being there" for young patients with cancer in their time of despair.

Estimating surface hardening profile of blank for obtaining high drawing ratio in deep drawing process using FE analysis

NASA Astrophysics Data System (ADS)

Tan, C. J.; Aslian, A.; Honarvar, B.; Puborlaksono, J.; Yau, Y. H.; Chong, W. T.

2015-12-01

We constructed an FE axisymmetric model to simulate the effect of partially hardened blanks on increasing the limiting drawing ratio (LDR) of cylindrical cups. We partitioned an arc-shaped hard layer into the cross section of a DP590 blank. We assumed the mechanical property of the layer is equivalent to either DP980 or DP780. We verified the accuracy of the model by comparing the calculated LDR for DP590 with the one reported in the literature. The LDR for the partially hardened blank increased from 2.11 to 2.50 with a 1 mm depth of DP980 ring-shaped hard layer on the top surface of the blank. The position of the layer changed with drawing ratios. We proposed equations for estimating the inner and outer diameters of the layer, and tested its accuracy in the simulation. Although the outer diameters fitted in well with the estimated line, the inner diameters are slightly less than the estimated ones.

Situation Awareness and Workload Measures for SAFOR

NASA Technical Reports Server (NTRS)

DeMaio, Joe; Hart, Sandra G.; Allen, Ed (Technical Monitor)

1999-01-01

The present research was conducted in support of the NASA Safe All-Weather Flight Operations for Rotorcraft (SAFOR) program. The purpose of the work was to investigate the utility of two measurement tools developed by the British Defense Evaluation Research Agency. These tools were a subjective workload assessment scale, the DRA Workload Scale (DRAWS), and a situation awareness measurement tool in which the crews self-evaluation of performance is compared against actual performance. These two measurement tools were evaluated in the context of a test of an innovative approach to alerting the crew by way of a helmet mounted display. The DRAWS was found to be usable, but it offered no advantages over extant scales, and it had only limited resolution. The performance self-evaluation metric of situation awareness was found to be highly effective.

Data Literacy: Real-World Learning through Problem-Solving with Data Sets

ERIC Educational Resources Information Center

Erwin, Robin W., Jr.

2015-01-01

The achievement of deep learning by secondary students requires teaching approaches that draw students into task commitment, integrated curricula, and analytical thinking. By using real-world data sets in project based instructional units, teachers can guide students in analyzing, interpreting, and reporting quantitative data. Working with…

Helping Disadvantaged Students: Findings from the Thuthuka Programme

ERIC Educational Resources Information Center

Barac, Karin

2015-01-01

Drawing on social closure theory, this study achieved a deep understanding of the perceptions and experiences of the first cohort of candidates passing through the Thuthuka support programme. Using semi-structured interviews as part of a qualitative approach, currently prevalent modes of professional closure were considered by taking the…

A Study of Undergraduate Students' Alternative Conceptions of Earth's Interior Using Drawing Tasks

ERIC Educational Resources Information Center

McAllister, Meredith L.

2014-01-01

Learning fundamental geoscience topics such as plate tectonics, earthquakes, and volcanoes requires students to develop a deep understanding of the conceptual models geologists use when describing the structure and dynamics of Earth's interior. Despite the importance of these mental models underlying much of the undergraduate geoscience…

Dance Like a Butterfly

ERIC Educational Resources Information Center

Stapp, Alicia; Chessin, Debby; Deason, Rebecca

2018-01-01

The authors represent the life cycle of the butterfly through writing, drawing, dance, and math. The Next Generation Science Standards (NGSS) (NGSS Lead States 2013) emphasize college and career readiness as well as critical thinking and problem-solving skills. Students must develop a deep understanding of science concepts and engage in scientific…

Intimacy and Ethical Action in Adult Education

ERIC Educational Resources Information Center

Plumb, Donovan

2009-01-01

This article suggests that thinking about the nature of intimacy, especially sexual intimacy, is a good way of deepening our understanding of how deep-seated psychic vulnerabilities play an important role in adult education contexts. Drawing on psychoanalytic accounts of human development, the paper outlines how the capacity for ethical action in…

Into the Deep: Mindful Music Learning

ERIC Educational Resources Information Center

Lind, Vicki R.

2014-01-01

This article outlines strategies for using thinking routines in the general music classroom to foster deeper learning. Based on the Artful Thinking program, a model developed by Harvard's Project Zero in collaboration with Traverse City [Michigan] Area Public Schools, thinking routines were developed to draw students into a more meaningful…

Apache Clinical Text and Knowledge Extraction System (cTAKES) | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

The tool extracts deep phenotypic information from the clinical narrative at the document-, episode-, and patient-level. The final output is FHIR compliant patient-level phenotypic summary which can be consumed by research warehouses or the DeepPhe native visualization tool.

Architectural Drafting.

ERIC Educational Resources Information Center

Davis, Ronald; Yancey, Bruce

Designed to be used as a supplement to a two-book course in basic drafting, these instructional materials consisting of 14 units cover the process of drawing all working drawings necessary for residential buildings. The following topics are covered in the individual units: introduction to architectural drafting, lettering and tools, site…

Schematic drawings of facial expressions for emotion recognition and interpretation by preschool-aged children.

PubMed

MacDonald, P M; Kirkpatrick, S W; Sullivan, L A

1996-11-01

Schematic drawings of facial expressions were evaluated as a possible assessment tool for research on emotion recognition and interpretation involving young children. A subset of Ekman and Friesen's (1976) Pictures of Facial Affect was used as the standard for comparison. Preschool children (N = 138) were shown drawing and photographs in two context conditions for six emotions (anger, disgust, fear, happiness, sadness, and surprise). The overall correlation between accuracy for the photographs and drawings was .677. A significant difference was found for the stimulus condition (photographs vs. drawings) but not for the administration condition (label-based vs. context-based). Children were significantly more accurate in interpreting drawings than photographs and tended to be more accurate in identifying facial expressions in the label-based administration condition for both photographs and drawings than in the context-based administration condition.

Validating the Modified Drug Adherence Work-Up (M-DRAW) Tool to Identify and Address Barriers to Medication Adherence.

PubMed

Lee, Sun; Bae, Yuna H; Worley, Marcia; Law, Anandi

2017-09-08

Barriers to medication adherence stem from multiple factors. An effective and convenient tool is needed to identify these barriers so that clinicians can provide a tailored, patient-centered consultation with patients. The Modified Drug Adherence Work-up Tool (M-DRAW) was developed as a 13-item checklist questionnaire to identify barriers to medication adherence. The response scale was a 4-point Likert scale of frequency of occurrence (1 = never to 4 = often). The checklist was accompanied by a GUIDE that provided corresponding motivational interview-based intervention strategies for each identified barrier. The current pilot study examined the psychometric properties of the M-DRAW checklist (reliability, responsiveness and discriminant validity) in patients taking one or more prescription medication(s) for chronic conditions. A cross-sectional sample of 26 patients was recruited between December 2015 and March 2016 at an academic medical center pharmacy in Southern California. A priming question that assessed self-reported adherence was used to separate participants into the control group of 17 "adherers" (65.4%), and into the intervention group of nine "unintentional and intentional non-adherers" (34.6%). Comparable baseline characteristics were observed between the two groups. The M-DRAW checklist showed acceptable reliability (13 item; alpha = 0.74) for identifying factors and barriers leading to medication non-adherence. Discriminant validity of the tool and the priming question was established by the four-fold number of barriers to adherence identified within the self-selected intervention group compared to the control group (4.4 versus 1.2 barriers, p < 0.05). The current study did not investigate construct validity due to small sample size and challenges on follow-up with patients. Future testing of the tool will include construct validation.

HullBUG Technology Development for Underwater Hull Cleaning

DTIC Science & Technology

2013-08-23

drawings of the Grooming Tool would be generated. These drawings would be vended out to approved vendors for quoting. Quotes would be obtained for...quantity purchased determined, parts would be vended out and manufactured. These parts would then be assembled at SRC. A test program would then follow...tolerances added to enable quoting by commercial machine shops. A top assembly drawing was created that identified all machined parts as well as all

Drawing as Instrument, Drawings as Evidence: Capturing Mental Processes with Pencil and Paper

PubMed Central

Puglionesi, Alicia

2016-01-01

Researchers in the mind sciences often look to the production and analysis of drawings to reveal the mental processes of their subjects. This essay presents three episodes that trace the emergence of drawing as an instrumental practice in the study of the mind. Between 1880 and 1930, drawings gained currency as a form of scientific evidence – as stable, reproducible signals from a hidden interior. I begin with the use of drawings as data in the child study movement, move to the telepathic transmission of drawings in psychical research and conclude with the development of drawing as an experimental and diagnostic tool for studying neurological impairment. Despite significant shifts in the theoretical and disciplinary organisation of the mind sciences in the early twentieth century, researchers attempted to stabilise the use of subject-generated drawings as evidence by controlling the contexts in which drawings were produced and reproduced, and crafting subjects whose interiority could be effectively circumscribed. While movements such as psychoanalysis and art therapy would embrace the narrative interpretation of patient art, neuropsychology continued to utilise drawings as material traces of cognitive functions. PMID:27292325

Drawing as Instrument, Drawings as Evidence: Capturing Mental Processes with Pencil and Paper.

PubMed

Puglionesi, Alicia

2016-07-01

Researchers in the mind sciences often look to the production and analysis of drawings to reveal the mental processes of their subjects. This essay presents three episodes that trace the emergence of drawing as an instrumental practice in the study of the mind. Between 1880 and 1930, drawings gained currency as a form of scientific evidence - as stable, reproducible signals from a hidden interior. I begin with the use of drawings as data in the child study movement, move to the telepathic transmission of drawings in psychical research and conclude with the development of drawing as an experimental and diagnostic tool for studying neurological impairment. Despite significant shifts in the theoretical and disciplinary organisation of the mind sciences in the early twentieth century, researchers attempted to stabilise the use of subject-generated drawings as evidence by controlling the contexts in which drawings were produced and reproduced, and crafting subjects whose interiority could be effectively circumscribed. While movements such as psychoanalysis and art therapy would embrace the narrative interpretation of patient art, neuropsychology continued to utilise drawings as material traces of cognitive functions.

Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel

NASA Astrophysics Data System (ADS)

Amini, Kamran; Akhbarizadeh, Amin; Javadpour, Sirus

2012-09-01

The effect of deep cryogenic treatment on the microstructure, hardness, and wear behavior of D2 tool steel was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), hardness test, pin-on-disk wear test, and the reciprocating pin-on-flat wear test. The results show that deep cryogenic treatment eliminates retained austenite, makes a better carbide distribution, and increases the carbide content. Furthermore, some new nano-sized carbides form during the deep cryogenic treatment, thereby increasing the hardness and improving the wear behavior of the samples.

Testing for Controlled Rapid Pressurization

DOE Data Explorer

Steven Knudsen

2014-09-03

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the holes we cored around the central borehole after the test. The brown colored core holes showed dye when we filled W1 with water and slightly pressurized it. This indicates there was some path between W1 and the colored core hole. The core holes are shown to their TD in the drawing. The green plane is a fracture plane which we believe is the result of the explosions of the gas mixture in W1. Data resource is a 2D .pdf Solid Works Drawing of borehole w-1

Drawing-to-Learn: A Framework for Using Drawings to Promote Model-Based Reasoning in Biology

PubMed Central

Quillin, Kim; Thomas, Stephen

2015-01-01

The drawing of visual representations is important for learners and scientists alike, such as the drawing of models to enable visual model-based reasoning. Yet few biology instructors recognize drawing as a teachable science process skill, as reflected by its absence in the Vision and Change report’s Modeling and Simulation core competency. Further, the diffuse research on drawing can be difficult to access, synthesize, and apply to classroom practice. We have created a framework of drawing-to-learn that defines drawing, categorizes the reasons for using drawing in the biology classroom, and outlines a number of interventions that can help instructors create an environment conducive to student drawing in general and visual model-based reasoning in particular. The suggested interventions are organized to address elements of affect, visual literacy, and visual model-based reasoning, with specific examples cited for each. Further, a Blooming tool for drawing exercises is provided, as are suggestions to help instructors address possible barriers to implementing and assessing drawing-to-learn in the classroom. Overall, the goal of the framework is to increase the visibility of drawing as a skill in biology and to promote the research and implementation of best practices. PMID:25713094

[The child's voice through drawings in cross-cultural psychotherapy].

PubMed

Bouaziz, Nora

2016-01-01

The drawing is a valuable mediation tool to encourage the active participation of the child in the cross-cultural group psychotherapeutic process. It enables the therapists and, ultimately, the family, to take into account their psychological movements. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Deep Impact Sequence Planning Using Multi-Mission Adaptable Planning Tools With Integrated Spacecraft Models

NASA Technical Reports Server (NTRS)

Wissler, Steven S.; Maldague, Pierre; Rocca, Jennifer; Seybold, Calina

2006-01-01

The Deep Impact mission was ambitious and challenging. JPL's well proven, easily adaptable multi-mission sequence planning tools combined with integrated spacecraft subsystem models enabled a small operations team to develop, validate, and execute extremely complex sequence-based activities within very short development times. This paper focuses on the core planning tool used in the mission, APGEN. It shows how the multi-mission design and adaptability of APGEN made it possible to model spacecraft subsystems as well as ground assets throughout the lifecycle of the Deep Impact project, starting with models of initial, high-level mission objectives, and culminating in detailed predictions of spacecraft behavior during mission-critical activities.

Drawings of the Modular Equipment Transporter and Hand Tool Carrier

NASA Image and Video Library

1970-10-12

S70-50762 (November 1970) --- A line drawing illustrating layout view of the modular equipment transporter (MET) and its equipment. A MET (or Rickshaw, as it has been nicknamed) will be used on the lunar surface for the first time during the Apollo 14 lunar landing mission. The Rickshaw will serve as a portable workbench with a place for the Apollo lunar hand tools (ALHT) and their carrier, three cameras, two sample container bags, a special environment sample container (SESC), a lunar portable magnetometer (LPM) and spare film magazines.

Emissions Scenario Portal for Visualization of Low Carbon Pathways

NASA Astrophysics Data System (ADS)

Friedrich, J.; Hennig, R. J.; Mountford, H.; Altamirano, J. C.; Ge, M.; Fransen, T.

2016-12-01

This proposal for a presentation is centered around a new project which is developed collaboratively by the World Resources Institute (WRI), Google Inc., and Deep Decarbonization Pathways Project (DDPP). The project aims to develop an online, open portal, the Emissions Scenario Portal (ESP),to enable users to easily visualize a range of future greenhouse gas emission pathways linked to different scenarios of economic and energy developments, drawing from a variety of modeling tools. It is targeted to users who are not modelling experts, but instead policy analysts or advisors, investment analysts, and similar who draw on modelled scenarios to inform their work, and who can benefit from better access to, and transparency around, the wide range of emerging scenarios on ambitious climate action. The ESP will provide information from scenarios in a visually appealing and easy-to-understand manner that enable these users to recognize the opportunities to reduce GHG emissions, the implications of the different scenarios, and the underlying assumptions. To facilitate the application of the portal and tools in policy dialogues, a series of country-specific and potentially sector-specific workshops with key decision-makers and analysts, supported by relevant analysis, will be organized by the key partners and also in broader collaboration with others who might wish to convene relevant groups around the information. This project will provide opportunities for modelers to increase their outreach and visibility in the public space and to directly interact with key audiences of emissions scenarios, such as policy analysts and advisors. The information displayed on the portal will cover a wide range of indicators, sectors and important scenario characteristics such as macroeconomic information, emission factors and policy as well as technology assumptions in order to facilitate comparison. These indicators have been selected based on existing standards (such as the IIASA AR5 database, the Greenhouse Gas Protocol and accounting literature) and stakeholder consultations. Examples for use cases include: technical advisers for governments NGO/Civil Society advocates Investors and bankers Modelers and academics Business sustainability officers

Deep nursing: a thoughtful, co-created nursing process.

PubMed

Griffiths, Colin

2017-03-30

This article examines some of the challenges in nursing practice experienced by patients and nurses in the UK and Ireland, and considers some of the associated stressors in the system. Nurses must respond to these challenges by crafting their own practice, and the article offers a blueprint for developing personal nursing practice through acceptance, paying detailed attention to patients, taking time with patients and personal reflection. It draws on innovations in learning disability practice to suggest that care should be jointly thought through and co-created by patients and nurses, and that this process of thoughtful engagement constitutes 'deep nursing'.

The effects of running in place in a limited area with abdominal drawing-in maneuvers on abdominal muscle thickness in chronic low back pain patients.

PubMed

Gong, Wontae

2016-11-21

Based on previous studies indicating that core stabilization exercises accompanied by abdominal drawing-in maneuvers increase the thickness of the transversus abdominis muscle. The purpose of this study was to compare the measurements of abdominal muscle thicknesses during running in place in a limited area with the abdominal drawing-in maneuver. The study classified the subjects into two experimental groups: the training group (M = 2, F = 13), and the control group (M = 2, F = 13). The training group performed three sets of running in place in a limited area with abdominal drawing-in maneuvers each time, three times a week for six weeks. The abdominal muscle thicknesses of the subjects were measured using ultrasonography. Comparing the training group's abdominal muscle thickness before and after this study, there was a statistical significance in all of the external obliquus abdominis, the internal obliquus abdominis, and the transversus abdominis. In particular, thicknesses of external obliquus abdominis and internal obliquus increased remarkably. Running in place in a limited area accompanied by abdominal drawing-in maneuvers increased the thickness of the deep abdominal muscles that are the basis of trunk stabilization.

Electrical and Electronic Drafting, Drafting 3: 9257.01.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course covers the standards used in the electronic field, electrical drawings, electronic drafting, and parts of functional drafting. The student will become familiar with symbols used in these fields and become proficient with tools and reference material used in drawing schematics and mechanical details and in electrical and electronic…

Art Instruction in the Botany Lab: A Collaborative Approach

ERIC Educational Resources Information Center

Baldwin, Lyn; Crawford, Ila

2010-01-01

Good observations are often fundamental to good science, and drawing has long been recognized as a tool to develop students' observation skills. Yet when drawing in illustrated journals was introduced into botany laboratories in an undergraduate, teaching-focused university, students reported feeling uncomfortable and intimidated by the required…

Psychometric Properties of the Deep Muscle Contraction Scale for Assessment of the Drawing-in Maneuver in Patients With Chronic Nonspecific Low Back Pain.

PubMed

Oliveira, Crystian B; Negrão Filho, Ruben F; Franco, Márcia R; Morelhão, Priscila K; Araujo, Amanda C; Pinto, Rafael Z

2017-06-01

Study Design A prospective cohort study. Background Motor control dysfunctions have been commonly reported in patients with chronic nonspecific low back pain (LBP). Physical therapists need clinical tools with adequate psychometric properties to assess such patients in clinical practice. The deep muscle contraction (DMC) scale is a clinical rating scale for assessing patients' ability to voluntarily contract deep abdominal muscles. Objectives To investigate the intrarater reliability, floor and ceiling effects, internal and external responsiveness, and correlation analysis (with ultrasound measures) of the DMC scale in patients with chronic nonspecific LBP undergoing a lumbar stabilization exercise program. Methods Sixty-two patients with chronic nonspecific LBP were included. At baseline, self-report questionnaires were administered to patients and a trained assessor evaluated abdominal muscle recruitment with the DMC scale and ultrasound imaging. Four ratios of the change in abdominal muscle thickness between the resting and contracted states were calculated through the ultrasound measures. After 1 week, the same ultrasound measures and DMC scale were collected again for the reliability analysis. The proportions of patients with the lowest and highest scores on the DMC scale were calculated to investigate floor and ceiling effects. All patients underwent a lumbar stabilization program, administered twice a week for 8 weeks. After the treatment period, all measures were collected again, with the addition of the global perceived effect scale, to assess the internal and external responsiveness of the measures. Correlation coefficients between ultrasound ratios and DMC scale total and subscale scores were also calculated. Results The intrarater reliability of the DMC scale and the 4 ratios of abdominal muscle thickness varied from moderate to excellent. The DMC scale showed no floor or ceiling effects. Results for internal responsiveness of the DMC scale showed large effect sizes (2.26; 84% confidence interval [CI]: 2.06, 2.45), whereas the external responsiveness was below the proposed threshold (area under the curve = 0.54; 95% CI: 0.39, 0.68). Fair and significant correlations between some ultrasound ratios and DMC subscales were found. Conclusion The DMC scale was demonstrated to be a reliable tool, with no ceiling and floor effects, and to detect change in the ability to contract the deep abdominal muscles after a lumbar stabilization exercise program, but with low accuracy for estimating patient-perceived clinical outcome. J Orthop Sports Phys Ther 2017;47(6):432-441. doi:10.2519/jospt.2017.7140.

Evaluation of mechanisms that might control transport of wastewater contaminants in bedrock multi-aquifer systems

USDA-ARS?s Scientific Manuscript database

Ongoing research has identified infectious human enteric viruses in the Madison, Wisconsin, public supply wells that draw water from a deep, confined sandstone aquifer. These viruses most likely originate from leaking sanitary sewers and are a potential human health risk. Due to a relatively short (...

Digital Storytelling: Emotions in Higher Education

ERIC Educational Resources Information Center

Ribeiro, Sandra; Moreira, António; da Silva, Cristina Pinto

2014-01-01

In tandem with the deep structural changes that have taken place in society, education must also shift towards a teaching approach focused on learning and the overall development of the student. The integration of technology may be the drive to foster the needed changes. We draw on the literature of pertaining to the role of emotions and…

Drawing on Popular Culture: Using Tattooing to Introduce Biological Concepts

ERIC Educational Resources Information Center

Poli, DorothyBelle; Fleenor, Matthew; Rearick, Matthew

2012-01-01

Collaboration between two biologists and a physicist resulted in the example of tattooing being used as a motivator to support discussion across several scientific fields (cell biology, microbiology, human health, and physics). Although often viewed as self-destructive and rebellious in the Western world, tattooing has a deep and rich history full…

Learning Styles: Fashion Fad or Lever for Change? The Application of Learning Style Theory to Inclusive Curriculum Delivery.

ERIC Educational Resources Information Center

Smith, Jan

2002-01-01

Examines how four classifications of learning styles--field dependence/independence, holistic/sequential, styles linked to the experiential learning cycle, and "deep" and "surface" learning--relate to curriculum values. Draws on research at Sheffield Hallam University into the learning styles of General National Vocational…

Lumbo-pelvic joint protection against antigravity forces: motor control and segmental stiffness assessed with magnetic resonance imaging.

PubMed

Richardson, C A; Hides, J A; Wilson, S; Stanton, W; Snijders, C J

2004-07-01

The antigravity muscles of the lumbo-pelvic region, especially transversus abdominis (TrA), are important for the protection and support of the weightbearing joints. Measures of TrA function (the response to the postural cue of drawing in the abdominal wall) have been developed and quantified using magnetic resonance imaging (MRI). Cross-sections through the trunk allowed muscle contraction as well as the large fascial attachments of the TrA to be visualized. The cross sectional area (CSA) of the deep musculo-fascial system was measured at rest and in the contracted state, using static images as well as a cine sequence. In this developmental study, MRI measures were undertaken on a small sample of low back pain (LBP) and non LBP subjects. Results demonstrated that, in non LBP subjects, the draw in action produced a symmetrical deep musculo-fascial "corset" which encircles the abdomen. This study demonstrated a difference in this "corset" measure between subjects with and without LBP. These measures may also prove useful to quantify the effect of unloading in bedrest and microgravity exposure.

Japanese children's family drawings and their link to attachment.

PubMed

Behrens, Kazuko Y; Kaplan, Nancy

2011-09-01

This study explored the applicability of family drawings as a tool to estimate attachment security in a sample of Japanese six-year-olds (N = 47), applying Kaplan and Main's ( 1986 ) Family Drawing system. Maternal secure/insecure attachment status judged by the Adult Attachment Interview predicted family drawings' secure/insecure distinction produced by Japanese six-year-olds. However, insecure Japanese drawings took forms not seen in the original Berkeley drawings, such as a lineup of faces alone. Further examination of the Japanese children's drawings using global rating scales (Fury, Carlson, & Sroufe, 1997 ) yielded significant gender differences, rarely reported in the attachment literature, with girls scoring higher in scales that predict attachment security and boys scoring higher in scales that predict attachment insecurity. However, attachment security, as captured in the drawings, was not related to attachment security, observed behaviorally using Main and Cassidy's ( 1988 ) sixth-year reunion system. Implications of the findings are discussed in light of measurements, gender, and culture.

Curiosity Robotic Arm

NASA Image and Video Library

2012-09-06

This engineering drawing shows the location of the arm on NASA Curiosity rover, in addition to the arm turret, which holds two instruments and three tools. The arm places and holds turret-mounted tools on rock and soil targets.

BioTapestry now provides a web application and improved drawing and layout tools

PubMed Central

Paquette, Suzanne M.; Leinonen, Kalle; Longabaugh, William J.R.

2016-01-01

Gene regulatory networks (GRNs) control embryonic development, and to understand this process in depth, researchers need to have a detailed understanding of both the network architecture and its dynamic evolution over time and space. Interactive visualization tools better enable researchers to conceptualize, understand, and share GRN models. BioTapestry is an established application designed to fill this role, and recent enhancements released in Versions 6 and 7 have targeted two major facets of the program. First, we introduced significant improvements for network drawing and automatic layout that have now made it much easier for the user to create larger, more organized network drawings. Second, we revised the program architecture so it could continue to support the current Java desktop Editor program, while introducing a new BioTapestry GRN Viewer that runs as a JavaScript web application in a browser. We have deployed a number of GRN models using this new web application. These improvements will ensure that BioTapestry remains viable as a research tool in the face of the continuing evolution of web technologies, and as our understanding of GRN models grows. PMID:27134726

BioTapestry now provides a web application and improved drawing and layout tools.

PubMed

Paquette, Suzanne M; Leinonen, Kalle; Longabaugh, William J R

2016-01-01

Gene regulatory networks (GRNs) control embryonic development, and to understand this process in depth, researchers need to have a detailed understanding of both the network architecture and its dynamic evolution over time and space. Interactive visualization tools better enable researchers to conceptualize, understand, and share GRN models. BioTapestry is an established application designed to fill this role, and recent enhancements released in Versions 6 and 7 have targeted two major facets of the program. First, we introduced significant improvements for network drawing and automatic layout that have now made it much easier for the user to create larger, more organized network drawings. Second, we revised the program architecture so it could continue to support the current Java desktop Editor program, while introducing a new BioTapestry GRN Viewer that runs as a JavaScript web application in a browser. We have deployed a number of GRN models using this new web application. These improvements will ensure that BioTapestry remains viable as a research tool in the face of the continuing evolution of web technologies, and as our understanding of GRN models grows.

Assessing emotional well-being of children in a Honduran orphanage: feasibility of two screening tools.

PubMed

Debiasi, Laura B; Reynolds, Annette; Buckner, Ellen B

2012-01-01

The World Health Organization (WHO) has determined mental health in children to be a priority area for evidence-based interventions. Effective and efficient screening methods are needed to assess emotional well-being of children from diverse cultures. This descriptive study examined two tools for feasibility, sensitivity, cultural appropriateness, and cost/time effectiveness. Emotional well-being was conceptualized using the Roy Adaptation Model as part of the self-concept adaptive mode. Emotional indicators were measured from Human Figure Drawings. Anxiety was measured using a modification of the Revised Children's Manifest Anxiety Survey (RCMAS). The sample included 11 girls who were 7 to 12 years of age and recruited from a girls' orphanage in Honduras. Results indicated the Human Figure Drawings identified more children possibly at risk than the RCMAS. Human Figure Drawings were found to be a time/cost-effective, sensitive, and culturally appropriate means for measuring emotional well-being in the setting. This study contributes to nursing knowledge by demonstrating feasibility of the screening tools for measuring emotional well-being of children in varied cultures.

Multipurpose Scribing and Drawing Tool

NASA Technical Reports Server (NTRS)

Ellis, J. M.

1986-01-01

Two-part tool reconfigured for variety of jobs. Tool performs several functions useful in layout. Lines, curves, and angles made visible as either bright scribe marks or as dark pencil (or ink) marks. Multipurpose tool speeds up laying out of patterns on sheet metal, wood, plastic, or paper. Tool is carried in pocket, then quickly assembled for service as height gauge, pair of dividers, protractor, surface gauge, or square.

Human figure drawings by children with Duchenne's muscular dystrophy.

PubMed

Pope-Grattan, M M; Burnett, C N; Wolfe, C V

1976-02-01

Seventy-two human figure drawings by forty-three patients who had a diagnosis of Duchenne's muscular dystrophy were examined. The study includes a description of these human figure drawings according to eleven emotional indicators and according to directionality quadrants. When the human figure drawings were used as a projective tool, four personality traits of some of the children were identified: physical inadequacy, immaturity, body anxiety, and insecurity. Both the emotional indicators and the quadrant in which the figures appeared were examined in relation to stages of the disease process to see if the human figure drawings of the children might reflect more stress and anxiety at a particular stage of the disease. Suggestions for improvements and recommendations for future study are given.

Deep smarts.

PubMed

Leonard, Dorothy; Swap, Walter

2004-09-01

When a person sizes up a complex situation and rapidly comes to a decision that proves to be not just good but brilliant, you think, "That was smart." After you watch him do this a few times, you realize you're in the presence of something special. It's not raw brainpower, though that helps. It's not emotional intelligence, either, though that, too, is often involved. It's deep smarts. Deep smarts are not philosophical--they're not"wisdom" in that sense, but they're as close to wisdom as business gets. You see them in the manager who understands when and how to move into a new international market, in the executive who knows just what kind of talk to give when her organization is in crisis, in the technician who can track a product failure back to an interaction between independently produced elements. These are people whose knowledge would be hard to purchase on the open market. Their insight is based on know-how more than on know-what; it comprises a system view as well as expertise in individual areas. Because deep smarts are experienced based and often context specific, they can't be produced overnight or readily imported into an organization. It takes years for an individual to develop them--and no time at all for an organization to lose them when a valued veteran walks out the door. They can be taught, however, with the right techniques. Drawing on their forthcoming book Deep Smarts, Dorothy Leonard and Walter Swap say the best way to transfer such expertise to novices--and, on a larger scale, to make individual knowledge institutional--isn't through PowerPoint slides, a Web site of best practices, online training, project reports, or lectures. Rather, the sage needs to teach the neophyte individually how to draw wisdom from experience. Companies have to be willing to dedicate time and effort to such extensive training, but the investment more than pays for itself.

Experimental formability analysis of bondal sandwich sheet

NASA Astrophysics Data System (ADS)

Kami, Abdolvahed; Banabic, Dorel

2018-05-01

Metal/polymer/metal sandwich sheets have recently attracted the interests of industries like automotive industry. These sandwich sheets have superior properties over single-layer metallic sheets including good sound and vibration damping and light weight. However, the formability of these sandwich sheets should be enhanced which requires more research. In this paper, the formability of Bondal sheet (DC06/viscoelastic polymer/DC06 sandwich sheet) was studied through different types of experiments. The mechanical properties of Bondal were determined by uniaxial tensile tests. Hemispherical punch stretching and hydraulic bulge tests were carried out to determine the forming limit diagram (FLD) of Bondal. Furthermore, cylindrical and square cup drawing tests were performed in dry and oil lubricated conditions. These tests were conducted at different blank holding forces (BHFs). An interesting observation about Bondal sheet deep drawing was obtaining of higher drawing depths at dry condition in comparison with oil-lubricated condition.

Undercuts by Laser Shock Forming

NASA Astrophysics Data System (ADS)

Wielage, Hanna; Vollertsen, Frank

2011-05-01

In laser shock forming TEA-CO2-laser induced shock waves are used to form metal foils, such as aluminum or copper. The process utilizes an initiated plasma shock wave on the target surface, which leads to a forming of the foil. A challenge in forming technologies is the manufacturing of undercuts. By conventional forming methods these special forms are not feasible. In this article, it is presented that undercuts in the micro range can be produced by laser shock deep drawing. Different drawing die diameters, drawing die depths and the material aluminum in the thicknesses 20 and 50 μm were investigated. It will be presented that smaller die diameters facilitate undercuts compared to bigger die diameters. The phenomena can be explained by Barlow's formula. Furthermore, it is shown which maximum undercut depth at different die diameters can be reached. To this end, cross-sections of the different parameter combinations are displayed.

Drawing on Stereotypes: Using Undergraduates' Sketches of Elders as a Teaching Tool

ERIC Educational Resources Information Center

Barrett, Anne E.; Cantwell, Laura E.

2007-01-01

Using data collected from undergraduates at two large, public universities (N = 183), we examined features of student drawings (e.g., facial expressions) as reflections of dominant views of the elderly. Sketches depicted both negative (e.g., frailty) and positive stereotypes (e.g., kindness). They also illustrate gender inequality; for example,…

Students' Illustrations of the Human Nervous System as a Formative Assessment Tool

ERIC Educational Resources Information Center

Ranaweera, Sisika Priyani Nelum; Montplaisir, Lisa Marie

2010-01-01

The purpose of this study was to explore students' knowledge and learning of the human nervous system (HNS) in an introductory undergraduate Human Anatomy and Physiology course. Classroom observations, demographic data, a preinstructional unit test with drawings, and a postinstructional unit test with drawings were used to identify students'…

The Constructed Relief: Put the Carving Tools Away and Build a Sculpture.

ERIC Educational Resources Information Center

Kostyniuk, Ron

1990-01-01

Describes origins of the constructed relief and shows some examples of contemporary artists' work. Suggests using this history to motivate students to construct their own reliefs. Outlines a four-step lesson: preliminary drawing, finished drawing, mock-up relief, and finished construction using durable materials, such as wood, acrylic sheet, or…

Lost in Translation: Reconsidering Reflective Practice and Design Studio Pedagogy

ERIC Educational Resources Information Center

Mewburn, Inger

2012-01-01

Drawing on empirical research done in the early 1980s, Donald Schon developed the theory of "reflective practice", putting forward the idea that the design studio teacher is a "coach" who helps students align with disciplinary norms and start to "think like an architect". Drawing on actor-network theory as a tool of…

Language Policy as a Sociocultural Tool: Insights from the University of Cape Town

ERIC Educational Resources Information Center

Karjalainen, Magda

2016-01-01

This theoretically oriented article draws on the author's previous research, which examined language policy and planning (LPP) of the University of Cape Town within the context of post-apartheid transformation driven by need to redress inequalities of the past, and demands of globalization. Drawing on critical linguistics, but indicating…

"Drawing in the Sand" as a Tool for Teaching Coastal Geography

ERIC Educational Resources Information Center

Fagan, Joseph B.; Sturm, Sean

2015-01-01

Field trips are recognized as an essential component of the study of geography. They are popular with learners and teachers, but their value as learning experiences is largely assumed. What is needed are interactive and relevant learning activities like "drawing in the sand," a participatory learning activity that has been introduced…

What Does Knowledge Look Like? Drawing as a Means of Knowledge Representation and Knowledge Construction

ERIC Educational Resources Information Center

Bowen, Tracey; Evans, M. Max

2015-01-01

The most common tools individuals use to articulate complex and abstract concepts are writing and spoken language, long privileged as primary forms of communication. However, our, explanations of these concepts may be more aptly communicated through visual means, such as drawings. Interpreting and analyzing abstract graphic representations is…

Document Analyses of Student Use of a Blogging-Mapping Tool to Explore Evidence of Deep and Reflective Learning

ERIC Educational Resources Information Center

Xie, Ying

2008-01-01

Theories about reflective thinking and deep-surface learning abound. In order to arrive at the definition for "reflective thinking toward deep learning," this study establishes that reflective thinking toward deep learning refers to a learner's purposeful and conscious activity of manipulating ideas toward meaningful learning and knowledge…

THE REGRESSION MODEL OF IRAN LIBRARIES ORGANIZATIONAL CLIMATE

PubMed Central

Jahani, Mohammad Ali; Yaminfirooz, Mousa; Siamian, Hasan

2015-01-01

Background: The purpose of this study was to drawing a regression model of organizational climate of central libraries of Iran’s universities. Methods: This study is an applied research. The statistical population of this study consisted of 96 employees of the central libraries of Iran’s public universities selected among the 117 universities affiliated to the Ministry of Health by Stratified Sampling method (510 people). Climate Qual localized questionnaire was used as research tools. For predicting the organizational climate pattern of the libraries is used from the multivariate linear regression and track diagram. Results: of the 9 variables affecting organizational climate, 5 variables of innovation, teamwork, customer service, psychological safety and deep diversity play a major role in prediction of the organizational climate of Iran’s libraries. The results also indicate that each of these variables with different coefficient have the power to predict organizational climate but the climate score of psychological safety (0.94) plays a very crucial role in predicting the organizational climate. Track diagram showed that five variables of teamwork, customer service, psychological safety, deep diversity and innovation directly effects on the organizational climate variable that contribution of the team work from this influence is more than any other variables. Conclusions: Of the indicator of the organizational climate of climateQual, the contribution of the team work from this influence is more than any other variables that reinforcement of teamwork in academic libraries can be more effective in improving the organizational climate of this type libraries. PMID:26622203

THE REGRESSION MODEL OF IRAN LIBRARIES ORGANIZATIONAL CLIMATE.

PubMed

Jahani, Mohammad Ali; Yaminfirooz, Mousa; Siamian, Hasan

2015-10-01

The purpose of this study was to drawing a regression model of organizational climate of central libraries of Iran's universities. This study is an applied research. The statistical population of this study consisted of 96 employees of the central libraries of Iran's public universities selected among the 117 universities affiliated to the Ministry of Health by Stratified Sampling method (510 people). Climate Qual localized questionnaire was used as research tools. For predicting the organizational climate pattern of the libraries is used from the multivariate linear regression and track diagram. of the 9 variables affecting organizational climate, 5 variables of innovation, teamwork, customer service, psychological safety and deep diversity play a major role in prediction of the organizational climate of Iran's libraries. The results also indicate that each of these variables with different coefficient have the power to predict organizational climate but the climate score of psychological safety (0.94) plays a very crucial role in predicting the organizational climate. Track diagram showed that five variables of teamwork, customer service, psychological safety, deep diversity and innovation directly effects on the organizational climate variable that contribution of the team work from this influence is more than any other variables. Of the indicator of the organizational climate of climateQual, the contribution of the team work from this influence is more than any other variables that reinforcement of teamwork in academic libraries can be more effective in improving the organizational climate of this type libraries.

The "Face" of Diabetes: Insight Into Youths' Experiences as Expressed Through Drawing.

PubMed

Elertson, Kathleen M; Liesch, Shari K; Babler, Elizabeth K

2016-06-01

The purpose of this descriptive pilot study was to assess the ability of youth to create a meaningful drawing related to living with type 1 diabetes and explore the benefits of expressing emotion through drawing in future interventional work. Youth aged 4 to 19 years (N = 242) with type I diabetes attending routine follow-up appointments within a pediatric specialty clinic were asked to draw: "If diabetes had a face what would it look like?" Drawings reflected many emotions and ranged from simple to complex in detail. Drawings reflected multiple experiences of living with diabetes including emotions, tools used for management, and effects of self-care. Youth were able to create drawings reflecting their experience of living with diabetes. Youth conveyed a variety of emotions, attitudes, and experiences in drawing the "face" of diabetes. Drawing during clinic visits provides opportunity to explore the unspoken experiences of living with a chronic health condition, which may not be obtained during routine clinical information gathering. Deeper understanding of patient's lived experience may assist providers in therapeutic management.

Children's illness drawings and asthma symptom awareness.

PubMed

Gabriels, R L; Wamboldt, M Z; McCormick, D R; Adams, T L; McTaggart, S R

2000-01-01

This study examines the relationship between children's abilities to perceive their symptoms of asthma via several previously researched subjective and objective procedures compared with their performance on a standardized children's drawing task and scale criteria. Results indicated that girls verbalized significantly more emotions about their drawings and were better able to detect airflow changes in their small airways than boys. The Gabriels Asthma Perception Drawing Scales (GAPDS) is a promising clinical tool for assessing children's perceptions and emotions about asthma via nonverbal methods. Varying methods of measuring asthma symptom awareness are not highly correlated; thus, more than one methodology is appropriate for use with children.

Open Space: Nurturing Reflection, Dialogue, and Radical Listening in Higher Education

ERIC Educational Resources Information Center

Bach, Dorothe J.; Cook-Sather, Alison

2016-01-01

This article is about and for teachers wishing to open space at the intersection of the affective and the cognitive-space, we argue, that is particularly conducive to deep learning and within which students can empower themselves as learners and knowers. Drawing on written and spoken reflections of three faculty members, the authors explore how…

A Study of Secondary School English Teachers' Beliefs in the Context of Curriculum Reform in China

ERIC Educational Resources Information Center

Zhang, Fengjuan; Liu, Yongbing

2014-01-01

This study examines the beliefs of Chinese junior high school English teachers about foreign language teaching and influencing contextual factors in a time when curriculum innovation is confronting deep-rooted cultural traditions and complex teaching realities. Drawing upon data collected by means of questionnaires and interviews, this study…

Preservice Elementary Teachers Use Drawings and Make Sets of Materials to Explain Multiplication and Division by Fractions

ERIC Educational Resources Information Center

Rule, Audrey C., Ed.; Hallagan, Jean E., Ed.

2006-01-01

Background: Multiplication and division by fractions are among the most troublesome concepts in the elementary mathematics curriculum. Recent studies have shown that preservice elementary teachers in the United States do not have deep understandings of these concepts. Effective ways to improve preservice teachers' conceptual understanding of these…

America's Forgotten Children: Child Poverty in Rural America.

ERIC Educational Resources Information Center

Nadel, Wendy; Sagawa, Shirley

This report draws on research, statistics, and the voices of rural young people to document the extent and causes of rural child poverty, and related problems and reasons for hope in specific focus areas. About 2.5 million rural children are chronically poor. Rural poverty is concentrated in central Appalachia, the deep South, the U.S.-Mexican…

Ethnography as Method, Methodology, and "Deep Theorizing" Closing the Gap between Text and Context in Academic Writing Research

ERIC Educational Resources Information Center

Lillis, Theresa

2008-01-01

This article critically explores the value of ethnography for enhancing context-sensitive approaches to the study of academic writing. Drawing on data from two longitudinal studies, student writing in the United Kingdom and professional academic writing in Hungary, Slovakia, Spain, and Portugal, the author illustrates the different contributions…

Tilting at Windmills: School Reform, San Diego, and America?s Race to Renew Public Education

ERIC Educational Resources Information Center

Colvin, Richard Lee

2013-01-01

A book that draws equally on Richard Lee Colvin's deep acquaintance with contemporary education reform and the unique circumstances of the San Diego experience, "Tilting at Windmills" is a penetrating and invaluable account of Alan Bersin's contentious superintendency. Between 1998, when Alan Bersin became superintendent of the San Diego…

"Most Learn Almost Nothing": Building Democratic Citizenship by Engaging Controversial History through Inquiry in Post-Communist Europe

ERIC Educational Resources Information Center

Misco, Thomas

2011-01-01

This article addresses the challenges and pathways of Holocaust education in post-communist countries through two case studies. I first examine historiographical, institutional and cultural obstacles to deep and meaningful treatments of the Holocaust within Latvian and Romanian schools. Drawing upon the unique experiences both countries had with…

Hydrostatic collapse research in support of the Oman India gas pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stark, P.R.; McKeehan, D.S.

1995-12-01

This paper provides a summary of the collapse test program conducted as part of the technical development for the Ultra Deep Oman to India Pipeline. The paper describes the motivation for conducting the collapse test program, outlines the test objectives and procedures, presents the results obtained, and draws conclusions on the factors affecting collapse resistance.

Instrumental Appropriation of a Collaborative, Dynamic-Geometry Environment and Geometrical Understanding

ERIC Educational Resources Information Center

Alqahtani, Muteb M.; Powell, Arthur B.

2016-01-01

To understand learners' appropriation of technological tools and geometrical understanding, we draw on the theory of instrumental genesis (Lonchamp, 2012; Rabardel & Beguin, 2005), which seeks to explain how learners accomplish tasks interacting with tools. To appropriate a tool, learners develop their own knowledge of how to use it, which…

District Self-Assessment Tool. College Readiness Indicator Systems Resource Series

ERIC Educational Resources Information Center

Annenberg Institute for School Reform at Brown University, 2014

2014-01-01

The purpose of the "District Self-Assessment Tool" is to provide school district and community stakeholders with an approach for assessing district capacity to support a college readiness indicator system and track progress over time. The tool draws on lessons from the collective implementation experiences of the four College Readiness…

A Framework for the Evaluation of CASE Tool Learnability in Educational Environments

ERIC Educational Resources Information Center

Senapathi, Mali

2005-01-01

The aim of the research is to derive a framework for the evaluation of Computer Aided Software Engineering (CASE) tool learnability in educational environments. Drawing from the literature of Human Computer Interaction and educational research, a framework for evaluating CASE tool learnability in educational environments is derived. The two main…

TRANSPORTATION RESEARCH IMPLEMENTATION MANAGEMENT : DEVELOPMENT OF PERFORMANCE BASED PROCESSES, METRICS, AND TOOLS

DOT National Transportation Integrated Search

2018-02-02

The objective of this study is to develop an evidencebased research implementation database and tool to support research implementation at the Georgia Department of Transportation (GDOT).A review was conducted drawing from the (1) implementati...

78 FR 45598 - Industry Forums on the Next ITS Strategic Plan; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... of critical thinking tools designed to draw out information to identify and validate focus areas for... inputs through an online tool, IdeaScale at http://itsstrategicplan.ideascale.com . The first facilitated...

Listen to them draw: screening children in primary care through the use of human figure drawings.

PubMed

Tielsch, Anna H; Allen, Patricia Jackson

2005-01-01

This literature review focuses on the Human Figure Drawing (HFD) methods put forth by Elizabeth Koppitz as a screening instrument. Children's drawings have potential as a mental health screening aide for health care practitioners in the primary care setting. This paper focuses on self-portrait drawings as a screening technique for emotional well-being, anxiety, and depression in school-aged children (6-12 years old). Using Koppitz's emotional indicators checklist for mental health, practitioners can use the child's HFD as a quick screening tool. Although the HFD is not diagnostic and can not be used as the sole indicator for anxiety or depression, two or more emotional indicators may signal to the clinician that further psychiatric assessment and referral is needed.

Drawings as a Tool for Understanding Geology in the Environment

ERIC Educational Resources Information Center

Martínez-Peña, Maria Begoña; Gil-Quílez, Maria José

2014-01-01

This study analyses graphic representations of landscapes, produced by 46 Spanish 10th-grade secondary students and 92 teacher-training students in the last year of their course at the Faculty of Education, and the descriptive power of these drawings in connection with questions posed on the systems being represented. The constituent parts of a…

The Pedagogical Potential of Drawing and Writing in a Primary Science Multimodal Unit

ERIC Educational Resources Information Center

Wilson, Rachel E.; Bradbury, Leslie U.

2016-01-01

In consideration of the potential of drawing and writing as assessment and learning tools, we explored how early primary students used these modes to communicate their science understandings. The context for this study was a curricular unit that incorporated multiple modes of representation in both the presentation of information and production of…

A Qualitative Analysis of School Concept on Primary School Students

ERIC Educational Resources Information Center

Yildiz, S. Armagan

2012-01-01

Child drawing, known as language of thinking, is as an effective tool of expression as written language. The use of paper, composition, and colors are meaningful for professionals. In this research, it is intended to determine the primary school students' perception of the school and schemas with their drawings of school. Case study which is one…

Obtaining manufactured geometries of deep-drawn components through a model updating procedure using geometric shape parameters

NASA Astrophysics Data System (ADS)

Balla, Vamsi Krishna; Coox, Laurens; Deckers, Elke; Plyumers, Bert; Desmet, Wim; Marudachalam, Kannan

2018-01-01

The vibration response of a component or system can be predicted using the finite element method after ensuring numerical models represent realistic behaviour of the actual system under study. One of the methods to build high-fidelity finite element models is through a model updating procedure. In this work, a novel model updating method of deep-drawn components is demonstrated. Since the component is manufactured with a high draw ratio, significant deviations in both profile and thickness distributions occurred in the manufacturing process. A conventional model updating, involving Young's modulus, density and damping ratios, does not lead to a satisfactory match between simulated and experimental results. Hence a new model updating process is proposed, where geometry shape variables are incorporated, by carrying out morphing of the finite element model. This morphing process imitates the changes that occurred during the deep drawing process. An optimization procedure that uses the Global Response Surface Method (GRSM) algorithm to maximize diagonal terms of the Modal Assurance Criterion (MAC) matrix is presented. This optimization results in a more accurate finite element model. The advantage of the proposed methodology is that the CAD surface of the updated finite element model can be readily obtained after optimization. This CAD model can be used for carrying out analysis, as it represents the manufactured part more accurately. Hence, simulations performed using this updated model with an accurate geometry, will therefore yield more reliable results.

Deep tissue massage: What are we talking about?

PubMed

Koren, Yogev; Kalichman, Leonid

2018-04-01

Massage is a common treatment in complementary and integrative medicine. Deep tissue massage, a form of therapeutic massage, has become more and more popular in recent years. Hence, the use of massage generally and deep tissue massage specifically, should be evaluated as any other modality of therapy to establish its efficacy and safety. To determine the definitions used for deep tissue massage in the scientific literature and to review the current scientific evidence for its efficacy and safety. Narrative review. There is no commonly accepted definition of deep tissue massage in the literature. The definition most frequently used is the intention of the therapist. We suggest separating the definitions of deep massage and deep tissue massage as follows: deep massage should be used to describe the intention of the therapist to treat deep tissue by using any form of massage and deep tissue massage should be used to describe a specific and independent method of massage therapy, utilizing the specific set of principles and techniques as defined by Riggs: "The understanding of the layers of the body, and the ability to work with tissue in these layers to relax, lengthen, and release holding patterns in the most effective and energy efficient way possible within the client's parameters of comfort". Heterogeneity of techniques and protocols used in published studies have made it difficult to draw any clear conclusions. Favorable outcomes may result from deep tissue massage in pain populations and patients with decreased range of motion. In addition, several rare serious adverse events were found related to deep tissue massage, probably as a result of the forceful application of massage therapy. Future research of deep tissue massage should be based on a common definition, classification system and the use of common comparators as controls. Copyright © 2017 Elsevier Ltd. All rights reserved.

The “Face” of Diabetes

PubMed Central

Liesch, Shari K; Babler, Elizabeth K

2016-01-01

Objective: The purpose of this descriptive pilot study was to assess the ability of youth to create a meaningful drawing related to living with type 1 diabetes and explore the benefits of expressing emotion through drawing in future interventional work. Methods: Youth aged 4 to 19 years (N = 242) with type I diabetes attending routine follow-up appointments within a pediatric specialty clinic were asked to draw: “If diabetes had a face what would it look like?” Results: Drawings reflected many emotions and ranged from simple to complex in detail. Drawings reflected multiple experiences of living with diabetes including emotions, tools used for management, and effects of self-care. Conclusions: Youth were able to create drawings reflecting their experience of living with diabetes. Youth conveyed a variety of emotions, attitudes, and experiences in drawing the “face” of diabetes. Drawing during clinic visits provides opportunity to explore the unspoken experiences of living with a chronic health condition, which may not be obtained during routine clinical information gathering. Deeper understanding of patient’s lived experience may assist providers in therapeutic management. PMID:28725833

Investigating Children's Perception of Nurses Through Their Drawings.

PubMed

Çakirer Çalbayram, Nazan; Altundağ, Sebahat; Aydin, Bahise

2017-09-01

Hospitalized children can have various fantasies about hospital, health staff, and related tools and equipment. They need to develop new coping strategies for compliance with hospitalization.This study aimed to investigate the perception of nurses by children with acute and chronic illness through their drawings. The study was carried out using a descriptive research model. "Nurses through the eyes of sick children data collection form" was used in data collection procedure. The instruction "draw a picture of a nurse, please" was used to get the children to draw a picture. The majority of the children portrayed nurses as a smiling face. The children with chronic diseases featured nurses more in their drawings and they mentioned more nurse duties. The most important sign of the progression of nursing is that the mentioning of the modern roles of nursing by the children in their drawings and expressions. As children are influenced by their emotions, thoughts, observations, and experiences while drawing pictures, nurses can determine their thoughts about the disease, hospitals, physicians, and nurses by having sick children draw pictures.

What Does the DAP:IQ Measure?: Drawing Comparisons between Drawing Performance and Developmental Assessments.

PubMed

Rehrig, Gwendolyn; Stromswold, Karin

2018-01-01

Human figure drawing tasks such as the Draw-a-Person test have long been used to assess intelligence (F. Goodenough, 1926). The authors investigate the skills tapped by drawing and the risk factors associated with poor drawing. Self-portraits of 345 preschool children were scored by raters trained in using the Draw-a-Person Intellectual Ability test (DAP:IQ) rubric (C. R. Reynolds & J. A. Hickman, 2004). Analyses of children's fine motor, gross motor, social, cognitive, and language skills revealed that only fine motor skill was an independent predictor of DAP:IQ scores. Being a boy and having a low birth weight were associated with lower DAP:IQ scores. These findings suggest that although the DAP:IQ may not be a valid measure of cognitive ability, it may be a useful screening tool for fine motor disturbances in at-risk children, such as boys who were born at low birth weights. Furthermore, researchers who use human figure drawing tasks to measure intelligence should measure fine motor skill in addition to intelligence.

A magnetic resonance imaging investigation of the transversus abdominis muscle during drawing-in of the abdominal wall in elite Australian Football League players with and without low back pain.

PubMed

Hides, Julie A; Boughen, Carly L; Stanton, Warren R; Strudwick, Mark W; Wilson, Stephen J

2010-01-01

Single-blinded quasi-experimental study. To investigate the ability of elite football players with and without low back pain (LBP) to voluntarily draw-in the abdominal wall. While there has been considerable debate regarding the contribution of the transversus abdominis (TrA) muscle to control the lumbar spine and pelvis, there is evidence that retraining motor control of the deep trunk muscles is commensurate with decreases in LBP. Magnetic resonance imaging (MRI) has been used to assess the TrA muscle during the draw-in maneuver, with the contraction of the TrA muscle reducing the circumference of the trunk. Impairments in performance of the draw-in maneuver have been shown in people with LBP. Forty-three elite players from a team in the Australian Football League were allocated to 3 groups: those with "no LBP," "a history of LBP but no current LBP," or "current LBP." MRI was used to image the cross-sectional area (CSA) of the trunk at the level of the L3-4 disc at the start and end of the draw-in maneuver. There was a significant decrease in the CSA of the trunk with the performance of the draw-in maneuver (P<.001). Subjects in the "no LBP" group were better able to "draw-in" the abdominal wall than subjects with current LBP (P = .015). This study provides evidence of an altered ability to draw-in the abdominal wall in footballers with current LBP. Retraining contraction of the TrA muscle may constitute one part of an exercise-therapy approach for athletes with current LBP.

Helping School Leaders Help New Teachers: A Tool for Transforming School-Based Induction

ERIC Educational Resources Information Center

Birkeland, Sarah; Feiman-Nemser, Sharon

2012-01-01

Ample research demonstrates the power of comprehensive induction to develop and retain new teachers. Education scholars generally agree on what powerful systems of induction include, yet few tools exist for guiding schools in creating such systems. Drawing on theory and practice, we have created such a tool. This article introduces the "Continuum…

A Tale of Two Doctoral Students: Social Media Tools and Hybridised Identities

ERIC Educational Resources Information Center

Bennett, Liz; Folley, Sue

2014-01-01

This paper explores the experiences of two doctoral students who embraced Web 2.0 tools in their digital scholarship practices. The paper gives an insider perspective of the challenges and potential of working with online tools, such as blogs, and participating in online communities, such as Twitter's #phdchat. We explore by drawing on our…

Drawing cure: children's drawings as a psychoanalytic instrument.

PubMed

Wittmann, Barbara

2010-01-01

This essay deals with the special case of drawings as psychoanalytical instruments. It aims at a theoretical understanding of the specific contribution made by children's drawings as a medium of the psychical. In the influential play technique developed by Melanie Klein, drawing continuously interacts with other symptomatic (play) actions. Nonetheless, specific functions of drawing within the play technique can be identified. The essay will discuss four crucial aspects in-depth: 1) the strengthening of the analysis's recursivity associated with the graphic artifact; 2) the opening of the analytic process facilitated by drawing; 3) the creation of a genuinely graphic mode of producing meaning that allows the child to develop a "theory" of the workings of his own psychic apparatus; and 4) the new possibilities of symbolization associated with the latter. In contrast to classical definitions of the psychological instrument, the child's drawing is a weakly structured tool that does not serve to reproduce psychic processes in an artificial, controlled setting. The introduction of drawing into the psychoanalytic cure is by no means interested in replaying past events, but in producing events suited to effecting a transformation of the synchronic structures of the unconscious.

But How Do We Learn? Talking to Vietnamese Children about How They Learn in and out of School

ERIC Educational Resources Information Center

Phelps, Renata; Nhung, Ha Thi Tuyet; Graham, Anne; Geeves, Richard

2012-01-01

Vietnam is currently striving to introduce more child-centred approaches to pedagogy. From a Western perspective, child-centred education requires teachers to perceive children as capable, active partners in learning and to develop deep understandings of their students, including the variety of ways in which they learn. This paper draws from a…

Lifelong Learning Theory and Pre-Service Teachers' Development of Knowledge and Dispositions to Work with Australian Aboriginal Students

ERIC Educational Resources Information Center

Bennet, Maria; Moriarty, Beverley

2016-01-01

This article draws on previous research by the authors and others as well as lifelong learning theory to argue the case for providing pre-service teachers with deep and meaningful experiences over time that help them to build their personal capacity for developing knowledge and dispositions to work with Australian Aboriginal students, their…

Policy Critics and Policy Survivors: Who Are They and How Do They Contribute to a Department Policy Role Typology?

ERIC Educational Resources Information Center

Golding, Jennie

2017-01-01

This paper considers the policy "roles" adopted by teachers enacting policy in a department. It draws on a longitudinal study of two secondary mathematics departments endeavouring to make deep change aligned with a demanding curriculum policy. The study validates aspects of an existing typology, demonstrates the existence of a variety of…

Including Families and Communities in Urban Education. Issues in the Research, Theory, Policy, and Practice of Urban Education

ERIC Educational Resources Information Center

Hands, Catherine, Ed.; Hubbard, Lea, Ed.

2011-01-01

The work of school, family and community partnerships is complex and messy and demands a thoughtful and deep investigation. Currently, parent and community involvement does not draw on school reform and educational change literature and conversely the school change literature often ignores the crucial role that communities play in educational…

Embedding Learning How to Learn in School Policy: The Challenge for Leadership

ERIC Educational Resources Information Center

Swaffield, Sue; MacBeath, John

2006-01-01

Achieving lasting and deep-seated change in schools through the embedding of a new set of practices with associated values is a familiar goal. This paper draws upon interviews with school coordinators and head teachers participating in the Learning How to Learn Project to explore the nature of embedding and the related challenges for leadership.…

Social Capital, Team Efficacy and Team Potency: The Mediating Role of Team Learning Behaviors

ERIC Educational Resources Information Center

van Emmerik, Hetty; Jawahar, I. M.; Schreurs, Bert; de Cuyper, Nele

2011-01-01

Purpose: Drawing on social capital theory and self-identification theory, this study aims to examine the associations of two indicators of social capital, personal networks and deep-level similarity, with team capability measures of team efficacy and team potency. The central focus of the study is to be the hypothesized mediating role of team…

"Anti-American Studies" in the Deep South: Dissenting Rhetorics, the Practice of Democracy, and Academic Freedom in Wartime Universities

ERIC Educational Resources Information Center

Powers, M. Karen; Chaput, Catherine

2007-01-01

Using Frederic Jameson, we outline concentric circles of the political unconscious structuring debates about academic freedom at the national and state levels. By drawing parallels between the World War I university and the contemporary university, we suggest that such circles function historically, always bearing traces of an earlier time. To…

Making Hope and History Rhyme: Reflections on Popular Education and Leadership Following a Visit to Highlander

ERIC Educational Resources Information Center

Connolly, Bríd; Finnegan, Fergal

2016-01-01

This article draws on our backgrounds as adult educators in Ireland and our experience at Highlander in 2014. We review our development as critical educators, exposed to deep inequalities in Irish society. We explore role of popular education in fostering social change, beginning with the commitment to equality and freedom, whereby, we produce…

Deep listening: towards an imaginative reframing of health and well-being practices in international development

PubMed Central

Pavlicevic, Mercédès; Impey, Angela

2014-01-01

This paper challenges the “intervention-as-solution” approach to health and well-being as commonly practised in the international development sector, and draws on the disciplinary intersections between Community Music Therapy and ethnomusicology in seeking a more negotiated and situationally apposite framework for health engagement. Drawing inspiration from music-based health applications in conflict or post-conflict environments in particular, and focusing on case studies from Lebanon and South Sudan respectively, the paper argues for a re-imagined international development health and well-being framework based on the concept of deep listening. Defined by composer Pauline Oliveros as listening which “digs below the surface of what is heard … unlocking layer after layer of imagination, meaning, and memory down to the cellular level of human experience” (Oliveros, 2005), the paper explores the methodological applications of such a dialogic, discursive approach with reference to a range of related listening stances – cultural, social and therapeutic. In so doing, it explores opportunities for multi-levelled and culturally inclusive health and well-being practices relevant to different localities in the world and aimed at the re-integration of self, place and community. PMID:25729413

Can Interactive Web-Based CAD Tools Improve the Learning of Engineering Drawing? A Case Study

ERIC Educational Resources Information Center

Pando Cerra, Pablo; Suárez González, Jesús M.; Busto Parra, Bernardo; Rodríguez Ortiz, Diana; Álvarez Peñín, Pedro I.

2014-01-01

Many current Web-based learning environments facilitate the theoretical teaching of a subject but this may not be sufficient for those disciplines that require a significant use of graphic mechanisms to resolve problems. This research study looks at the use of an environment that can help students learn engineering drawing with Web-based CAD…

Picturing a Classroom Community: Student Drawings as a Pedagogical Tool to Assess Features of Community in the Classroom

ERIC Educational Resources Information Center

Farmer, Jennie L.; Leonard, Alison E.; Spearman, Mindy; Qian, Meihua; Rosenblith, Suzanne

2016-01-01

Community in the classroom remains critical for a successful classroom climate. However, assessing classroom community features can be challenging, and P-12 students' voices are often left out of the discussion. One way to examine student perceptions of classroom community is through the use of student drawings. In this Pedagogical Implications…

Robotic Form-Finding and Construction Based on the Architectural Projection Logic

NASA Astrophysics Data System (ADS)

Zexin, Sun; Mei, Hongyuan

2017-06-01

In this article we analyze the relationship between the architectural drawings and form-finding, indicate that architects should reuse and redefine the traditional architectural drawings as a from-finding tool. Explain the projection systems and analyze how these systems affected the architectural design. Use robotic arm to do the experiment and establish a cylindrical projection form-finding system.

What Is the Teacher Doing? What Are the Students Doing? An Application of the Draw-a-Science-Teacher-Test

ERIC Educational Resources Information Center

Minogue, James

2010-01-01

This study documents the use of the Draw-a-Science-Teacher-Test as diagnostic tool for both preservice teacher beliefs about science teaching and science methods course effectiveness. Direct comparison of pre-course to post-course images from 50 preservice elementary teachers was undertaken using McNemar's test. Results indicated statistically…

Using the Draw-a-Scientist Test for Inquiry and Evaluation

ERIC Educational Resources Information Center

Miele, Eleanor

2014-01-01

The Draw-a-Scientist Test (DAST) is a tool to assess stereotypical imagery of scientists. This paper describes the use of the DAST as both a model for inquiry and as a method of assessing the affective domain. The DAST was administered in a science education methods course for undergraduate students of elementary education, a methods course for…

Response simulation and theoretical calibration of a dual-induction resistivity LWD tool

NASA Astrophysics Data System (ADS)

Xu, Wei; Ke, Shi-Zhen; Li, An-Zong; Chen, Peng; Zhu, Jun; Zhang, Wei

2014-03-01

In this paper, responses of a new dual-induction resistivity logging-while-drilling (LWD) tool in 3D inhomogeneous formation models are simulated by the vector finite element method (VFEM), the influences of the borehole, invaded zone, surrounding strata, and tool eccentricity are analyzed, and calibration loop parameters and calibration coefficients of the LWD tool are discussed. The results show that the tool has a greater depth of investigation than that of the existing electromagnetic propagation LWD tools and is more sensitive to azimuthal conductivity. Both deep and medium induction responses have linear relationships with the formation conductivity, considering optimal calibration loop parameters and calibration coefficients. Due to the different depths of investigation and resolution, deep induction and medium induction are affected differently by the formation model parameters, thereby having different correction factors. The simulation results can provide theoretical references for the research and interpretation of the dual-induction resistivity LWD tools.

Automation of review/approval cycle of MCAUTO CAD/CAM generated drawings and documents

NASA Technical Reports Server (NTRS)

Minn, H. S.

1986-01-01

The review/approval of MCAUTO/UNIGRAPHICS CAD/CAM generated drawings and documents is done through routing of hard copies of drawings and memos via mail, a process both time consuming and expensive. It is proposed that a set of procedures and the required software tools be designed for transmission, revision, and signing-off of such documents via electronic data transfer, while maintaining a sufficient degree of data integrity and individual security. A main resistance to such a technique will be the limited size of the display screen (19 inch class) and infrequent layer switching with the attendant time delay during the process of reviewing the drawing. Such opposition should diminish as the users become familiar with the hardwares and its operation. It is suggested that user profiles be set so that the protection class list of the originator of the drawing include at least one common class with each of the individuals who will be involved in the Revision/Approval cycle. In this way the originator will be able to tranfer a file for their review and also be able to copy back the file to make the necessary permanent changes. Individual security is maintained by restricted access to signature files and by restricting the list of individuals who will be authorized to sign off. This is accomplished through two software tools:LAYCOPY and SIGN. It is felt that these proposed procedures and techniques will adequately maintain both the file integrity and individual security during Review/Approval Cycle of MCAUTO generated drawings without the need for hardcopy routing.

Comparisons among tools, surface orientation, and pencil grasp for children 23 months of age.

PubMed

Yakimishyn, Janet E; Magill-Evans, Joyce

2002-01-01

The purpose of this study was to determine whether writing tool type and angle of writing surface affect grasp. Fifty-one children 23 to 24 months of age who were typically developing drew with a primary marker, colored pencil, and small piece of crayon on a table and an easel. The marker and pencil were presented pointing left, right, and toward the child. The order of writing tool presentation was counterbalanced. Grasps were scored with a 5-point rating system and analyzed with dependent t tests. Children used a more mature grasp when drawing with a piece of crayon than with a pencil. No difference in grasp maturity was found when using a pencil compared with a marker. A more mature grasp when drawing on the easel compared with the table was used with the crayon but not with the marker or pencil. Results imply that a short writing tool combined with a vertical surface can influence the grasp of young children.

CoCoFolio: A Web-Based Electronic Portfolio for Enriching Students' Learning by Collaboration.

ERIC Educational Resources Information Center

Sugiyama, Takeshi; Kakehi, Naoyuki; Kura, Tsuneko; Takahashi Tokiichiro

A Web-based electronic portfolio, CoCoFolio, was developed for enriching students' learning by collaboration. CoCoFolio consists of two collaboration tools: a multi-layer drawing tool, CoCoBoard, and a small bulletin board, Discussion Board, for each student's submission. These tools support a series of expression activities: expression, sharing,…

ARBOOK: Development and Assessment of a Tool Based on Augmented Reality for Anatomy

ERIC Educational Resources Information Center

Ferrer-Torregrosa, J.; Torralba, J.; Jimenez, M. A.; García, S.; Barcia, J. M.

2015-01-01

The evolution of technologies and the development of new tools with educational purposes are growing up. This work presents the experience of a new tool based on augmented reality (AR) focusing on the anatomy of the lower limb. ARBOOK was constructed and developed based on TC and MRN images, dissections and drawings. For ARBOOK evaluation, a…

The Development of an Open-Ended Drawing Tool: An Alternative Diagnostic Tool for Assessing Students' Understanding of the Particulate Nature of Matter

ERIC Educational Resources Information Center

Nyachwaya, James M.; Mohamed, Abdi-Rizak; Roehrig, Gillian H.; Wood, Nathan B.; Kern, Anne L.; Schneider, Jamie L.

2011-01-01

Many studies in the chemical education literature report students' alternative conceptions in chemistry and the difficulty they present for future learning. In this paper, we review existing diagnostic tools used to uncover students' alternative conceptions in chemistry and suggest that there are two fundamental issues with such instruments,…

Radio Science from an Optical Communications Signal

NASA Technical Reports Server (NTRS)

Moision, Bruce; Asmar, Sami; Oudrhiri, Kamal

2013-01-01

NASA is currently developing the capability to deploy deep space optical communications links. This creates the opportunity to utilize the optical link to obtain range, doppler, and signal intensity estimates. These may, in turn, be used to complement or extend the capabilities of current radio science. In this paper we illustrate the achievable precision in estimating range, doppler, and received signal intensity of an non-coherent optical link (the current state-of-the-art for a deep-space link). We provide a joint estimation algorithm with performance close to the bound. We draw comparisons to estimates based on a coherent radio frequency signal, illustrating that large gains in either precision or observation time are possible with an optical link.

The ‘French exception’: the right to continuous deep sedation at the end of life

PubMed Central

Horn, Ruth

2018-01-01

In 2016, a law came into force in France granting terminally ill patients the right to continuous deep sedation (CDS) until death. This right was proposed as an alternative to euthanasia and presented as the ‘French response’ to problems at the end of life. The law draws a distinction between CDS and euthanasia and other forms of sympton control at the end of life. France is the first country in the world to legislate on CDS. This short report describes the particular context and underlying social values that led to this piece of legislation, and explores its meaning in the wider French context. PMID:29056584

Drawings vs. narratives: drawing as a tool to encourage verbalization in children whose fathers are drug abusers.

PubMed

Lev-Wiesel, Rachel; Liraz, Revital

2007-01-01

The study aimed to examine the extent to which the use of drawing prior to narrative description increases the richness of the narrative given by children who are exposed to a succession of negative life events. The sample consisted of study and comparison groups (60 children: 27 boys, 33 girls), ranging in age from 9 to 14, whose fathers were addicted to drugs. The study group was asked to first 'draw your life in the shadow of your father's addiction to drugs', then verbally describes 'your life under the shadow of an addicted father'; the comparison group was asked only the latter. Following evaluation of drawings and narratives by two judges, analysis of variance between the groups' narratives revealed that when children were first asked to draw, their narratives were more detailed and more revealing of emotions compared to children who were asked only to verbally describe their lives, whereas expressions of resistance and splitting were more apparent in the comparison group.

School-age children's fears, anxiety, and human figure drawings.

PubMed

Carroll, M K; Ryan-Wenger, N A

1999-01-01

The purpose of this study was to identify the fears of school-age children and determine the relationship between fear and anxiety. A descriptive, correlational, secondary analysis study was conducted using a convenience sample of 90 children between the ages of 8 and 12 years. Each child was instructed to complete the Revised Children's Anxiety Scale and then answer questions from a structured interview. On completion, each child was instructed to draw a human figure drawing. Frequency charts and correlational statistics were used to analyze the data. Findings indicated that the most significant fears of the boys were in the categories of animals, safety, school, and supernatural phenomena, whereas girls were more fearful of natural phenomena. High correlations existed between anxiety scores and the number of fears and emotional indicators on human figure drawings. Because human figure drawings are reliable tools for assessing anxiety and fears in children, practitioners should incorporate these drawings as part of their routine assessments of fearful children.

Neuro-impressions: interpreting the nature of human creativity

PubMed Central

Siler, Todd Lael

2012-01-01

Understanding the creative process is essential for realizing human potential. Over the past four decades, the author has explored this subject through his brain-inspired drawings, paintings, symbolic sculptures, and experimental art installations that present myriad impressions of human creativity. These impressionistic artworks interpret rather than illustrate the complexities of the creative process. They draw insights from empirical studies that correlate how human beings create, learn, remember, innovate, and communicate. In addition to offering fresh aesthetic experiences, this metaphorical art raises fundamental questions concerning the deep connections between the brain and its creations. The author describes his artworks as embodiments of everyday observations about the neuropsychology of creativity, and its all-purpose applications for stimulating and accelerating innovation. PMID:23091455

"How Do You Draw Freedom?" Transmediation as a Tool for Thinking in a Third-Grade Classroom

ERIC Educational Resources Information Center

Leland, Christine H.; Ociepka, Anne; Wackerly, Amy

2015-01-01

Children and their teacher participated in a project that explored the question of how engaging in transmediation after hearing a story might affect children's meaning construction. In this article we share our work with a teacher and her third graders as they were challenged to move from the traditional activity of drawing a picture about a story…

The Case for an Open Data Model

DTIC Science & Technology

1998-08-01

Microsoft Word, Pagemaker, and Framemaker , and the drawing programs MacDraw, Adobe Illustrator, and Microsoft PowerPoint, use their own proprietary...needs a custom word counting tool, since no utility could work in Word and other word processors. Framemaker for Windows does not have a word counting...supplied in 2 At least none that I could find in Framemaker 5.5 for Windows. Another problem with

Assessing a Couple's Relationship and Compatibility Using the MARI[R] Card Test and Mandala Drawings

ERIC Educational Resources Information Center

Frame, Phyllis G.

2006-01-01

This paper illustrates the use of the MARI[R] Card Test, a transpersonal assessment tool which includes archetypal designs and color choices, as well as the drawing of a white and black mandala, or circle picture, for assessing the compatibility of two people in a committed relationship. In an informal pilot research study, 22 couples were given…

Automated Pathogenesis-Based Diagnosis of Lumbar Neural Foraminal Stenosis via Deep Multiscale Multitask Learning.

PubMed

Han, Zhongyi; Wei, Benzheng; Leung, Stephanie; Nachum, Ilanit Ben; Laidley, David; Li, Shuo

2018-02-15

Pathogenesis-based diagnosis is a key step to prevent and control lumbar neural foraminal stenosis (LNFS). It conducts both early diagnosis and comprehensive assessment by drawing crucial pathological links between pathogenic factors and LNFS. Automated pathogenesis-based diagnosis would simultaneously localize and grade multiple spinal organs (neural foramina, vertebrae, intervertebral discs) to diagnose LNFS and discover pathogenic factors. The automated way facilitates planning optimal therapeutic schedules and relieving clinicians from laborious workloads. However, no successful work has been achieved yet due to its extreme challenges since 1) multiple targets: each lumbar spine has at least 17 target organs, 2) multiple scales: each type of target organ has structural complexity and various scales across subjects, and 3) multiple tasks, i.e., simultaneous localization and diagnosis of all lumbar organs, are extremely difficult than individual tasks. To address these huge challenges, we propose a deep multiscale multitask learning network (DMML-Net) integrating a multiscale multi-output learning and a multitask regression learning into a fully convolutional network. 1) DMML-Net merges semantic representations to reinforce the salience of numerous target organs. 2) DMML-Net extends multiscale convolutional layers as multiple output layers to boost the scale-invariance for various organs. 3) DMML-Net joins a multitask regression module and a multitask loss module to prompt the mutual benefit between tasks. Extensive experimental results demonstrate that DMML-Net achieves high performance (0.845 mean average precision) on T1/T2-weighted MRI scans from 200 subjects. This endows our method an efficient tool for clinical LNFS diagnosis.

Cold pool organization and the merging of convective updrafts in a Large Eddy Simulation

NASA Astrophysics Data System (ADS)

Glenn, I. B.; Krueger, S. K.

2016-12-01

Cold pool organization is a process that accelerates the transition from shallow to deep cumulus convection, and leads to higher deep convective cloud top heights. The mechanism by which cold pool organization enhances convection remains not well understood, but the basic idea is that since precipitation evaporation and a low equivalent potential temperature in the mid-troposphere lead to strong cold pools, the net cold pool effect can be accounted for in a cumulus parameterization as a relationship involving those factors. Understanding the actual physical mechanism at work will help quantify the strength of the relationship between cold pools and enhanced deep convection. One proposed mechanism of enhancement is that cold pool organization leads to reduced distances between updrafts, creating a local environment more conducive to convection as updrafts entrain parcels of air recently detrained by their neighbors. We take this hypothesis one step further and propose that convective updrafts actually merge, not just exchange recently processed air. Because entrainment and detrainment around an updraft draws nearby air in or pushes it out, respectively, they act like dynamic flow sources and sinks, drawing each other in or pushing each other away. The acceleration is proportional to the inverse square of the distance between two updrafts, so a small reduction in distance can make a big difference in the rate of merging. We have shown in previous research how merging can be seen as collisions between different updraft air parcels using Lagrangian Parcel Trajectories (LPTs) released in a Large Eddy Simulation (LES) during a period with organized deep convection. Now we use a Eulerian frame of reference to examine the updraft merging process during the transition from shallow to organized deep convection. We use a case based on the Large-Scale Biosphere-Atmosphere Experiment in Amazonia (LBA) for our LES. We directly measure the rate of entrainment and the properties of the entrained air for all convective updrafts in the simulation. We use a tracking algorithm to define merging between convective updrafts. We will show the rate of merging as the transition between shallow and deep convection occurs and the different distributions of entrainment rate and ultimate detrainment height of merged and non-merged updrafts.

How Secondary History Teachers Use and Think about Museums: Current Practices and Untapped Promise for Promoting Historical Understanding

ERIC Educational Resources Information Center

Marcus, Alan S.; Levine, Thomas H.; Grenier, Robin S.

2012-01-01

Museums have great potential to help secondary students develop a deep understanding of the past; however, we know little about what history teachers actually do or want to accomplish when they utilize museums. In this study, the authors draw on questionnaire and interview data from 94 secondary history teachers in Connecticut in an effort to…

'Not-Being-At-Home': Subject, Freedom and Transcending in Heideggerian Educational Philosophy

ERIC Educational Resources Information Center

d'Agnese, Vasco

2018-01-01

In my paper, by drawing on the writings Heidegger developed in the late 1920s, I wish to display what we may refer to as the thorough educational nature of Heideggerian reflection. It is my argument that the analysis of Dasein we find in the early Heidegger displays an extraordinary deep and dense reflection on selfhood and subjectivity, a…

Exploring the Use of Supplemental Instruction: Supporting Deep Understanding and Higher-Order Thinking in Chemistry

ERIC Educational Resources Information Center

Paideya, V.; Sookrajh, R.

2010-01-01

Many under-prepared university students do not know how to study (Martin and Arendale 1993) because they have not yet developed the abstract reasoning skills that allow them to learn new ideas simply by reading a text or listening to a lecture. This article draws from selected findings from a PhD study currently being undertaken at a university in…

A Critical Co-Constructed Autoethnography of a Gendered Cross-Cultural Mentoring between Two Early Career Latin@ Scholars Working in the Deep South

ERIC Educational Resources Information Center

Suriel, Regina L.; Martinez, James; Evans-Winters, Venus

2018-01-01

Multicultural mentoring has been suggested to support Latin@ faculty success in their careers, yet current literature on effective mentorships of Latin@ faculty is limited. This critical co-constructed autoethnography draws on critical race theory (CRT) and latin@ critical race theory (LatCrit) frameworks to highlight the lived experiences and key…

Slime mould biotechnology

NASA Astrophysics Data System (ADS)

Mayne, Richard

2015-03-01

Slime mould computing is an inherently multi-disciplinary subfield of unconventional computing that draws upon aspects of not only theoretical computer science and electronics, but also the natural sciences. This chapter focuses on the biology of slime moulds and expounds the viewpoint that a deep, intuitive understanding of slime mould life processes is a fundamental requirement for understanding -- and, hence, harnessing -- the incredible behaviour patterns we may characterise as "computation"...

Digitally Inspired Thinking: Can Social Media Lead to Deep Learning in Higher Education?

ERIC Educational Resources Information Center

Samuels-Peretz, Debbie; Dvorkin Camiel, Lana; Teeley, Karen; Banerjee, Gouri

2017-01-01

In this study, students from a variety of disciplines, who were enrolled in six courses that incorporate the use of social media, were surveyed to evaluate their perception of how the integration of social-media tools supports deep approaches to learning. Students reported that social media supports deep learning both directly and indirectly,…

Data augmentation-assisted deep learning of hand-drawn partially colored sketches for visual search

PubMed Central

Muhammad, Khan; Baik, Sung Wook

2017-01-01

In recent years, image databases are growing at exponential rates, making their management, indexing, and retrieval, very challenging. Typical image retrieval systems rely on sample images as queries. However, in the absence of sample query images, hand-drawn sketches are also used. The recent adoption of touch screen input devices makes it very convenient to quickly draw shaded sketches of objects to be used for querying image databases. This paper presents a mechanism to provide access to visual information based on users’ hand-drawn partially colored sketches using touch screen devices. A key challenge for sketch-based image retrieval systems is to cope with the inherent ambiguity in sketches due to the lack of colors, textures, shading, and drawing imperfections. To cope with these issues, we propose to fine-tune a deep convolutional neural network (CNN) using augmented dataset to extract features from partially colored hand-drawn sketches for query specification in a sketch-based image retrieval framework. The large augmented dataset contains natural images, edge maps, hand-drawn sketches, de-colorized, and de-texturized images which allow CNN to effectively model visual contents presented to it in a variety of forms. The deep features extracted from CNN allow retrieval of images using both sketches and full color images as queries. We also evaluated the role of partial coloring or shading in sketches to improve the retrieval performance. The proposed method is tested on two large datasets for sketch recognition and sketch-based image retrieval and achieved better classification and retrieval performance than many existing methods. PMID:28859140

Drawing-to-learn: a framework for using drawings to promote model-based reasoning in biology.

PubMed

Quillin, Kim; Thomas, Stephen

2015-03-02

The drawing of visual representations is important for learners and scientists alike, such as the drawing of models to enable visual model-based reasoning. Yet few biology instructors recognize drawing as a teachable science process skill, as reflected by its absence in the Vision and Change report's Modeling and Simulation core competency. Further, the diffuse research on drawing can be difficult to access, synthesize, and apply to classroom practice. We have created a framework of drawing-to-learn that defines drawing, categorizes the reasons for using drawing in the biology classroom, and outlines a number of interventions that can help instructors create an environment conducive to student drawing in general and visual model-based reasoning in particular. The suggested interventions are organized to address elements of affect, visual literacy, and visual model-based reasoning, with specific examples cited for each. Further, a Blooming tool for drawing exercises is provided, as are suggestions to help instructors address possible barriers to implementing and assessing drawing-to-learn in the classroom. Overall, the goal of the framework is to increase the visibility of drawing as a skill in biology and to promote the research and implementation of best practices. © 2015 K. Quillin and S. Thomas. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Drawing on student knowledge of neuroanatomy and neurophysiology.

PubMed

Slominski, Tara N; Momsen, Jennifer L; Montplaisir, Lisa M

2017-06-01

Drawings are an underutilized assessment format in Human Anatomy and Physiology (HA&P), despite their potential to reveal student content understanding and alternative conceptions. This study used student-generated drawings to explore student knowledge in a HA&P course. The drawing tasks in this study focused on chemical synapses between neurons, an abstract concept in HA&P. Using two preinstruction drawing tasks, students were asked to depict synaptic transmission and summation. In response to the first drawing task, 20% of students ( n = 352) created accurate representations of neuron anatomy. The remaining students created drawings suggesting an inaccurate or incomplete understanding of synaptic transmission. Of the 208 inaccurate student-generated drawings, 21% depicted the neurons as touching. When asked to illustrate summation, only 10 students (roughly 4%) were able to produce an accurate drawing. Overall, students were more successful at drawing anatomy (synapse) than physiology (summation) before formal instruction. The common errors observed in student-generated drawings indicate students do not enter the classroom as blank slates. The error of "touching" neurons in a chemical synapse suggests that students may be using intuitive or experiential knowledge when reasoning about physiological concepts. These results 1 ) support the utility of drawing tasks as a tool to reveal student content knowledge about neuroanatomy and neurophysiology; and 2 ) suggest students enter the classroom with better knowledge of anatomy than physiology. Collectively, the findings from this study inform both practitioners and researchers about the prevalence and nature of student difficulties in HA&P, while also demonstrating the utility of drawing in revealing student knowledge. Copyright © 2017 the American Physiological Society.

Visual Tools as Mediational Means: A Methodological Investigation

ERIC Educational Resources Information Center

Hilppö, Jaakko; Lipponen, Lasse; Kumpulainen, Kristiina; Rajala, Antti

2017-01-01

In this study, we investigated how Finnish children used photographs and drawings to discuss their preschool day experiences in focus groups. Building on sociocultural perspectives on mediated action, we specifically focused on how these visual tools were used as mediational means in sharing experiences. The results of our embodied interaction…

Visual Reasoning Tools in Action: Double Number Lines, Area Models, and Other Diagrams Power Up Students' Ability to Solve and Make Sense of Various Problems

ERIC Educational Resources Information Center

Watanabe, Tad

2015-01-01

The Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) identifies the strategic use of appropriate tools as one of the mathematical practices and emphasizes the use of pictures and diagrams as reasoning tools. Starting with the early elementary grades, CCSSM discusses students' solving of problems "by drawing." In later…

SMC: SCENIC Model Control

NASA Technical Reports Server (NTRS)

Srivastava, Priyaka; Kraus, Jeff; Murawski, Robert; Golden, Bertsel, Jr.

2015-01-01

NASAs Space Communications and Navigation (SCaN) program manages three active networks: the Near Earth Network, the Space Network, and the Deep Space Network. These networks simultaneously support NASA missions and provide communications services to customers worldwide. To efficiently manage these resources and their capabilities, a team of student interns at the NASA Glenn Research Center is developing a distributed system to model the SCaN networks. Once complete, the system shall provide a platform that enables users to perform capacity modeling of current and prospective missions with finer-grained control of information between several simulation and modeling tools. This will enable the SCaN program to access a holistic view of its networks and simulate the effects of modifications in order to provide NASA with decisional information. The development of this capacity modeling system is managed by NASAs Strategic Center for Education, Networking, Integration, and Communication (SCENIC). Three primary third-party software tools offer their unique abilities in different stages of the simulation process. MagicDraw provides UMLSysML modeling, AGIs Systems Tool Kit simulates the physical transmission parameters and de-conflicts scheduled communication, and Riverbed Modeler (formerly OPNET) simulates communication protocols and packet-based networking. SCENIC developers are building custom software extensions to integrate these components in an end-to-end space communications modeling platform. A central control module acts as the hub for report-based messaging between client wrappers. Backend databases provide information related to mission parameters and ground station configurations, while the end user defines scenario-specific attributes for the model. The eight SCENIC interns are working under the direction of their mentors to complete an initial version of this capacity modeling system during the summer of 2015. The intern team is composed of four students in Computer Science, two in Computer Engineering, one in Electrical Engineering, and one studying Space Systems Engineering.

Impact Of The Material Variability On The Stamping Process: Numerical And Analytical Analysis

NASA Astrophysics Data System (ADS)

Ledoux, Yann; Sergent, Alain; Arrieux, Robert

2007-05-01

The finite element simulation is a very useful tool in the deep drawing industry. It is used more particularly for the development and the validation of new stamping tools. It allows to decrease cost and time for the tooling design and set up. But one of the most important difficulties to have a good agreement between the simulation and the real process comes from the definition of the numerical conditions (mesh, punch travel speed, limit conditions,…) and the parameters which model the material behavior. Indeed, in press shop, when the sheet set changes, often a variation of the formed part geometry is observed according to the variability of the material properties between these different sets. This last parameter represents probably one of the main source of process deviation when the process is set up. That's why it is important to study the influence of material data variation on the geometry of a classical stamped part. The chosen geometry is an omega shaped part because of its simplicity and it is representative one in the automotive industry (car body reinforcement). Moreover, it shows important springback deviations. An isotropic behaviour law is assumed. The impact of the statistical deviation of the three law coefficients characterizing the material and the friction coefficient around their nominal values is tested. A Gaussian distribution is supposed and their impact on the geometry variation is studied by FE simulation. An other approach is envisaged consisting in modeling the process variability by a mathematical model and then, in function of the input parameters variability, it is proposed to define an analytical model which leads to find the part geometry variability around the nominal shape. These two approaches allow to predict the process capability as a function of the material parameter variability.

Preliminary design review package on air flat plate collector for solar heating and cooling system

NASA Technical Reports Server (NTRS)

1977-01-01

Guidelines to be used in the development and fabrication of a prototype air flat plate collector subsystem containing 320 square feet (10-4 ft x 8 ft panels) of collector area are presented. Topics discussed include: (1) verification plan; (2) thermal analysis; (3) safety hazard analysis; (4) drawing list; (5) special handling, installation and maintenance tools; (6) structural analysis; and (7) selected drawings.

The Transition from Spacecraft Development Ot Flight Operation: Human Factor Considerations

NASA Technical Reports Server (NTRS)

Basilio, Ralph R.

2000-01-01

In the field of aeronautics and astronautics, a paradigm shift has been witnessed by those in academia, research and development, and private industry. Long development life cycles and the budgets to support such programs and projects has given way to aggressive task schedules and leaner resources to draw from all the while challenging assigned individuals to create and produce improved products of processes. however, this "faster, better, cheaper" concept cannot merely be applied to the design, development, and test of complex systems such as earth-orbiting of interplanetary robotic spacecraft. Full advantage is not possible without due consideration and application to mission operations planning and flight operations, Equally as important as the flight system, the mission operations system consisting of qualified personnel, ground hardware and software tools, and verified and validated operational processes, should also be regarded as a complex system requiring personnel to draw upon formal education, training, related experiences, and heuristic reasoning in engineering an effective and efficient system. Unquestionably, qualified personnel are the most important elements of a mission operations system. This paper examines the experiences of the Deep Space I Project, the first in a series of new technology in-flight validation missions sponsored by the United States National Aeronautics and Space Administration (NASA), specifically, in developing a subsystems analysis and technology validation team comprised of former spacecraft development personnel. Human factor considerations are investigated from initial concept/vision formulation; through operational process development; personnel test and training; to initial uplink product development and test support. Emphasis has been placed on challenges and applied or recommended solutions, so as to provide opportunities for future programs and projects to address and disposition potential issues and concerns as early as possible to reap the benefits associated with learning from other's past experiences.

Investigation of the influence of process parameters on adhesive wear under hot stamping conditions

NASA Astrophysics Data System (ADS)

Schwingenschlögl, P.; Weldi, M.; Merklein, M.

2017-09-01

Current challenges like increasing safety standards and reducing fuel consumption motivate lightweight construction in modern car bodies. Besides using lightweight workpiece materials like aluminum, hot stamping has been established as a key technology for producing safety relevant components. Producing hot stamped parts out of ultra-high strength steels offers the possibility to improve the crash performance. At the same time the weight of car structure is reduced by using thinner sheet thicknesses. In order to avoid oxide scale formation and ensure corrosion protection, AlSi coatings are commonly deposited on the sheet surfaces used for direct hot stamping. This workpiece coating has a critical impact on the tribological conditions within the forming process and, as a consequence, influences the quality of hot stamped parts as well as tool wear. AlSi coatings have been identified as major reason for adhesive wear, which represents the main wear mechanism in hot stamping. Within this study, the influence of the process parameters on adhesive wear are investigated in dependency of workpiece and tool temperatures, drawing velocities and contact pressures. The tribological behavior is analyzed based on strip drawing experiments under direct hot stamping conditions. The experiments are performed with AlSi coated 22MnB5 in contact with the hot working tool steel 1.2367. For analyzing the amount of adhesion on the friction jaws, the surfaces are characterized by optical measurements. The experiments indicate that higher workpiece temperatures cause severe adhesive wear on the tool surface, while an increase of drawing velocity or contact pressure led to reduced adhesion. The measured friction coefficients decreased with rising amount of adhesion and remained at a constant level after a certain adhesive layer was built up on the tool surface.

Emotional indicators in children's human figure drawings.

PubMed

Catte, M; Cox, M V

1999-06-01

The human figure drawings of a group of emotionally-disturbed boys were compared with those of a group of well-adjusted boys closely matched for chronological age and another for mental age. A comparison based on Koppitz's (1968) original emotional indicators and another, based on new UK norms, showed that the emotionally-disturbed children included significantly more indicators in their drawings than their well-adjusted peers. Although this difference was statistically significant it is actually quite small. In addition, there were no differences among the groups in the kinds of indicators they exhibited. The usefulness of the Koppitz test as a tool for clinical use is questioned.

6. INTERIOR VIEW OF BASEMENT OF CA. 1948 FACTORY ADDITION, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR VIEW OF BASEMENT OF CA. 1948 FACTORY ADDITION, WITH REINFORCED CONCRETE FRAME AND FLOOR OF REINFORCED CONCRETE TEE-BEAMS, LOOKING NORTH. AT LEFT IS DEEP DRAW, HEAVY PRESS MANUFACTURED BY E. W. BLISS CO., BROOKLYN, NEW YORK. PRESS #3-1/2 B, PATENTED BY E. W. BLISS CO., 1893. MANUFACTURERS PLATE INDICATES PRESS DATES FROM 1920. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dong, Futao, E-mail: dongft@sina.com; Du, Linxiu; Liu, Xianghua

2013-10-15

The influence of Mn,S and B contents on microstructural characteristics, mechanical properties and hydrogen trapping ability of low-carbon Al-killed enamel steel was investigated. The materials were produced and processed in a laboratory and the ultra-fast continuous annealing processing was performed using a continuous annealing simulator. It was found that increasing Mn,S contents in steel can improve its hydrogen trapping ability which is attributed by refined ferrite grains, more dispersed cementite and added MnS inclusions. Nevertheless, it deteriorates mechanical properties of steel sheet. Addition of trace boron results in both good mechanical properties and significantly improved hydrogen trapping ability. The boronmore » combined with nitrogen segregating at grain boundaries, cementite and MnS inclusions, provides higher amount of attractive hydrogen trapping sites and raises the activation energy for hydrogen desorption from them. - Highlights: • We study microstructures and properties in low-carbon Al-killed enamel steel. • Hydrogen diffusion coefficients are measured to reflect fish-scale resistance. • Manganese improves hydrogen trapping ability but decrease deep-drawing ability. • Boron improves both hydrogen trapping ability and deep-drawing ability. • Both excellent mechanical properties and fish-scale resistance can be matched.« less

The Neural Basis of Mark Making: A Functional MRI Study of Drawing

PubMed Central

Yuan, Ye; Brown, Steven

2014-01-01

Compared to most other forms of visually-guided motor activity, drawing is unique in that it “leaves a trail behind” in the form of the emanating image. We took advantage of an MRI-compatible drawing tablet in order to examine both the motor production and perceptual emanation of images. Subjects participated in a series of mark making tasks in which they were cued to draw geometric patterns on the tablet's surface. The critical comparison was between when visual feedback was displayed (image generation) versus when it was not (no image generation). This contrast revealed an occipito-parietal stream involved in motion-based perception of the emerging image, including areas V5/MT+, LO, V3A, and the posterior part of the intraparietal sulcus. Interestingly, when subjects passively viewed animations of visual patterns emerging on the projected surface, all of the sensorimotor network involved in drawing was strongly activated, with the exception of the primary motor cortex. These results argue that the origin of the human capacity to draw and write involves not only motor skills for tool use but also motor-sensory links between drawing movements and the visual images that emanate from them in real time. PMID:25271440

Can drawing be considered a projective measure for children's distress in paediatric dentistry?

PubMed

Aminabadi, Naser Asl; Ghoreishizadeh, Arezoo; Ghoreishizadeh, Mohammadali; Oskouei, Sina Ghertasi

2011-01-01

Several tools have been developed for the measurement of emotional status of the child in paediatric dental clinics including nonverbal self-report techniques. Subjective methods like drawing and Child Drawing: Hospital (CD:H) score have recently been applied in hospitalized children. Studies, however, have not attempted to analyse children's drawings as an aid to investigate the subjective feelings of children in paediatric dental settings. To assess drawing as a measure for child's distress in paediatric dental settings. Fifty-four children, aged 4-11 years, participated in this study. After finishing the first therapeutic session, the child was instructed to draw a picture of a person in a dental clinic. The pictures were scored using CD:H score sheet and the findings were compared with SEM and Frankl scores. CD:H was correlated with both Frankl (correlation coefficient = -0.550) and SEM (correlation coefficient = +0.483) scales (P < 0.001). Drawing is a useful measure of children's emotional status in dental settings in a way that is easier, familiar and more enjoyable for the child patient. © 2010 The Authors. International Journal of Paediatric Dentistry © 2010 BSPD, IAPD and Blackwell Publishing Ltd.

Methodological Foundations for Designing Intelligent Computer-Based Training

DTIC Science & Technology

1991-09-03

student models, graphic forms, version control data structures, flowcharts , etc. Circuit simulations are an obvious case. A circuit, after all, can... flowcharts as a basic data structure, and we were able to generalize our tools to create a flowchart drawing tool for inputting both the appearance and...the meaning of flowcharts efficiently. For the Sherlock work, we built a tool that permitted inputting of information about front panels and

"I'm Not Here to Learn How to Mark Someone Else's Stuff": An Investigation of an Online Peer-to-Peer Review Workshop Tool

ERIC Educational Resources Information Center

Wilson, Michael John; Diao, Ming Ming; Huang, Leon

2015-01-01

In this article, we explore the intersecting concepts of fairness, trust and temporality in relation to the implementation of an online peer-to-peer review Moodle Workshop tool at a Sydney metropolitan university. Drawing on qualitative interviews with unit convenors and online surveys of students using the Workshop tool, we seek to highlight a…

Overcoming the Critical Shortage of STEM - Prepared Secondary Students Through Modeling and Simulation

NASA Technical Reports Server (NTRS)

Spencer, Thomas; Berry, Brandon

2012-01-01

In developing understanding of technological systems - modeling and simulation tools aid significantly in the learning and visualization processes. In design courses we sketch , extrude, shape, refine and animate with virtual tools in 3D. Final designs are built using a 3D printer. Aspiring architects create spaces with realistic materials and lighting schemes rendered on model surfaces to create breathtaking walk-throughs of virtual spaces. Digital Electronics students design systems that address real-world needs. Designs are simulated in virtual circuits to provide proof of concept before physical construction. This vastly increases students' ability to design and build complex systems. We find students using modeling and simulation in the learning process, assimilate information at a much faster pace and engage more deeply in learning. As Pre-Engineering educators within the Career and Technical Education program at our school division's Technology Academy our task is to help learners in their quest to develop deep understanding of complex technological systems in a variety of engineering disciplines. Today's young learners have vast opportunities to learn with tools that many of us only dreamed about a decade or so ago when we were engaged in engineering and other technical studies. Today's learner paints with a virtual brush - scenes that can aid significantly in the learning and visualization processes. Modeling and simulation systems have become the new standard tool set in the technical classroom [1-5]. Modeling and simulation systems are now applied as feedback loops in the learning environment. Much of the study of behavior change through the use of feedback loops can be attributed to Stanford Psychologist Alfred Bandura. "Drawing on several education experiments involving children, Bandura observed that giving individuals a clear goal and a means to evaluate their progress toward that goal greatly increased the likelihood that they would achieve it."

"Will I Learn What I Want to Learn?" Usable Representations, "Students" and OECD Assessment Production

ERIC Educational Resources Information Center

Shahjahan, Riyad A.; Morgan, Clara; Nguyen, David J.

2015-01-01

Amid growing debates around international assessment tools in educational policy, few have critically examined how students themselves are cast in policy tool production processes and discourse. Drawing on Stuart Hall's concept of representation, we show how higher education (HE) "students" are constructed, fixed and normalized by the…

Jazzing up the Psychological Contract

ERIC Educational Resources Information Center

Hartley, Nell Tabor

2010-01-01

Helping students and practitioners to understand and utilize the Psychological Contract is often a difficult task. Unlike fault-finding research, this paper presents the PC as a positive, vibrant and valuable tool. In an effort to make the concept less elusive, the paper draws upon the metaphor of jazz. The metaphor is an accepted tool of…

Perceptual Drawing as a Learning Tool in a College Biology Laboratory

NASA Astrophysics Data System (ADS)

Landin, Jennifer

2011-12-01

The use of drawing in the classroom has a contentious history in the U.S. education system. While most instructors and students agree that the activity helps students focus and observe more details, there is a lack of empirical data to support these positions. This study examines the use of three treatments (writing a description, drawing a perceptual image, or drawing a perceptual image after participating in a short instructional lesson on perceptual drawing) each week over the course of a semester. The students in the "Drawing with Instruction" group exhibit a small but significantly higher level of content knowledge by the end of the semester. When comparing Attitude Toward Biology and Observational Skills among the three groups, inconclusive results restrict making any conclusions. Student perceptions of the task are positive, although not as strong as indicated by other studies. A student behavior observed during the first study led to another question regarding student cognitive processes, and demonstrated cognitive change in student-rendered drawings. The data from the second study indicate that hemispheric dominance or visual/verbal learning do not impact learning from perceptual drawing activities. However, conservatism and need for closure are inversely proportional to the change seen in student drawings over the course of a lesson. Further research is needed to verify these conclusions, as the second study has a small number of participants.

The effect of elevated die temperature on deformation of deep drawn round metal cup

NASA Astrophysics Data System (ADS)

Basril, M. A. M.; Hafsyam, Y. M.; Azuddin, M.; Choudhury, I. A.

2017-06-01

One of the major considerations in the current deep drawing practice is the product quality. In this research, the effect of heating temperature on the drawability of the round metal cup has been investigated. Firstly, round metal cups of aluminium and mild steel were drawn from the blank diameters of 60 mm, 65 mm and 70 mm. The experiment conducted at room temperature first, then at 50°C and 100°C. The elongation of the major and minor strains along the cup profile after the process is measured and analysed. On the other hand, the defects from the experiment output and ABAQUS/CAE simulation are compared. The result from experiment shows that the highest major elongation is 11.64 mm and it is happened to a deep drawn aluminium round cup with LDR of 1.69 at temperature of 100°C. On the other hand, for deep drawn mild steel round cup, shows highest major elongation of 12.44 mm for a cup with LDR of 1.56 at 100°C. Both of these statements indicates that the higher temperature could improve the formability of the deep drawn parts besides reducing the probability of the defect to be happened.

An advanced constitutive model in the sheet metal forming simulation: the Teodosiu microstructural model and the Cazacu Barlat yield criterion

NASA Astrophysics Data System (ADS)

Alves, J. L.; Oliveira, M. C.; Menezes, L. F.

2004-06-01

Two constitutive models used to describe the plastic behavior of sheet metals in the numerical simulation of sheet metal forming process are studied: a recently proposed advanced constitutive model based on the Teodosiu microstructural model and the Cazacu Barlat yield criterion is compared with a more classical one, based on the Swift law and the Hill 1948 yield criterion. These constitutive models are implemented into DD3IMP, a finite element home code specifically developed to simulate sheet metal forming processes, which generically is a 3-D elastoplastic finite element code with an updated Lagrangian formulation, following a fully implicit time integration scheme, large elastoplastic strains and rotations. Solid finite elements and parametric surfaces are used to model the blank sheet and tool surfaces, respectively. Some details of the numerical implementation of the constitutive models are given. Finally, the theory is illustrated with the numerical simulation of the deep drawing of a cylindrical cup. The results show that the proposed advanced constitutive model predicts with more exactness the final shape (medium height and ears profile) of the formed part, as one can conclude from the comparison with the experimental results.

Calculation and validation of heat transfer coefficient for warm forming operations

NASA Astrophysics Data System (ADS)

Omer, Kaab; Butcher, Clifford; Worswick, Michael

2017-10-01

In an effort to reduce the weight of their products, the automotive industry is exploring various hot forming and warm forming technologies. One critical aspect in these technologies is understanding and quantifying the heat transfer between the blank and the tooling. The purpose of the current study is twofold. First, an experimental procedure to obtain the heat transfer coefficient (HTC) as a function of pressure for the purposes of a metal forming simulation is devised. The experimental approach was used in conjunction with finite element models to obtain HTC values as a function of die pressure. The materials that were characterized were AA5182-O and AA7075-T6. Both the heating operation and warm forming deep draw were modelled using the LS-DYNA commercial finite element code. Temperature-time measurements were obtained from both applications. The results of the finite element model showed that the experimentally derived HTC values were able to predict the temperature-time history to within a 2% of the measured response. It is intended that the HTC values presented herein can be used in warm forming models in order to accurately capture the heat transfer characteristics of the operation.

Skeletal changes during and after spaceflight.

PubMed

Vico, Laurence; Hargens, Alan

2018-03-21

Space sojourns are challenging for life. The ability of the human body to adapt to these extreme conditions has been noted since the beginning of human space travel. Skeletal alterations that occur during spaceflight are now better understood owing to tools such as dual-energy X-ray densitometry and high-resolution peripheral quantitative CT, and murine models help researchers to understand cellular and matrix changes that occur in bone and that are difficult to measure in humans. However, questions remain with regard to bone adaptation and osteocyte fate, as well as to interactions of the skeleton with fluid shifts towards the head and with the vascular system. Further investigations into the relationships between the musculoskeletal system, energy metabolism and sensory motor acclimatisation are needed. In this regard, an integrated intervention is required that will address multiple systems simultaneously. Importantly, radiation and isolation-related stresses are gaining increased attention as the prospect of human exploration into deep space draws nearer. Although space is a unique environment, clear parallels exist between the effects of spaceflight, periods of immobilization and ageing, with possibly irreversible features. Space travel offers an opportunity to establish integrated deconditioning and ageing interventions that combine nutritional, physical and pharmaceutical strategies.

Relationship between clock and star drawing and the degree of hepatic encephalopathy.

PubMed

Edwin, Natasha; Peter, John Victor; John, George; Eapen, C E; Graham, Petra L

2011-09-01

PURPOSE OF THE STUDY Current hepatic encephalopathy grading tools are limited because of complexity or subjectivity. The degree of constructional apraxia could serve as a simple, objective and reproducible tool to grade encephalopathy. STUDY DESIGN In this cross-sectional study of patients with chronic liver disease, the degree of constructional apraxia was judged by their ability to copy a star and clock face and compared with conventional encephalopathy grading by the West Haven Criteria (WHC) and the Porto Systemic Encephalopathy Index (PSEI). Three blinded observers independently graded the figures. Sensitivity, specificity and positive predictive value (PPV) of clock and star scores (score 0 implying no encephalopathy and >0 hepatic encephalopathy) were assessed against conventional scoring systems (WHC grade >0 or PSEI ≥0.33 indicating encephalopathy). Mosaic and box plots were generated to assess if the degree of constructional apraxia correlated with the severity of encephalopathy. RESULTS 71 patients were studied between October 2008 and July 2009; 11 (15.4%) had WHC grade 0, 32 (45%) grade 1, and 28 (39.4%) grades 2 and 3 encephalopathy. The sensitivity, specificity and PPV of the clock drawing for the diagnosis of encephalopathy was 85%, 80%, and 96%, respectively, and 77%, 70%, and 94%, respectively, for the star drawing. Box plots and intervals on mean PSEI showed an increasing relationship between clock/star scores and PSEI. There was substantial agreement between WHC and clock (weighted κ 0.61) and star scores (weighted κ 0.71). Inter-observer reliability was at least 0.70 for star and at least 0.79 for the clock score. CONCLUSION Clock and star drawing may serve as reproducible, inexpensive bedside tools for diagnosing and grading the severity of hepatic encephalopathy.

Drawing method can improve musculoskeletal anatomy comprehension in medical faculty student.

PubMed

Joewono, Muliani; Karmaya, I Nyoman Mangku; Wirata, Gede; Yuliana; Widianti, I Gusti Ayu; Wardana, I Nyoman Gede

2018-03-01

The Chinese philosophy of Confucianism said "What I heard I forgot, what I see, I remember, what I do, I understand." During this time, most of the teaching and learning process relies on viewing and listening modalities only. As a result, much information does not last long in memory as well as the material understanding achieves became less deep. In studying anatomy science, drawing is one of effective important methods because it is an integration of ideas and knowledge of vision thereby increasing comprehension and learning motivation of college students. The purpose of this research is to know the musculoskeletal anatomy comprehension by drawing learning method in Medical Faculty student. This research uses observational analytic design with the cross-sectional design. Total sampling was done to the entire student of Physiotherapy Study Program in 2012, 2013, and 2014, Medical Faculty of Udayana University. The average value of musculoskeletal anatomy of the student in 2012, 2013, and 2014 sequentially are 31.67, 33.57, and 45.00, respectively. Normality test with Shapiro-Wilk and homogeneity with Levene's test showed normal results and homogeneous. One-way ANOVA test between groups showed a significant result that is 11.00 ( P <0.05). It is concluded that the drawing method can improve the musculoskeletal anatomy comprehension in Medical Faculty student.

Deep Learning in Radiology.

PubMed

McBee, Morgan P; Awan, Omer A; Colucci, Andrew T; Ghobadi, Comeron W; Kadom, Nadja; Kansagra, Akash P; Tridandapani, Srini; Auffermann, William F

2018-03-29

As radiology is inherently a data-driven specialty, it is especially conducive to utilizing data processing techniques. One such technique, deep learning (DL), has become a remarkably powerful tool for image processing in recent years. In this work, the Association of University Radiologists Radiology Research Alliance Task Force on Deep Learning provides an overview of DL for the radiologist. This article aims to present an overview of DL in a manner that is understandable to radiologists; to examine past, present, and future applications; as well as to evaluate how radiologists may benefit from this remarkable new tool. We describe several areas within radiology in which DL techniques are having the most significant impact: lesion or disease detection, classification, quantification, and segmentation. The legal and ethical hurdles to implementation are also discussed. By taking advantage of this powerful tool, radiologists can become increasingly more accurate in their interpretations with fewer errors and spend more time to focus on patient care. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond, David W.; Blankenship, Douglas A.; Buerger, Stephen

The dynamic stability of deep drillstrings is challenged by an inability to impart controllability with ever-changing conditions introduced by geology, depth, structural dynamic properties and operating conditions. A multi-organizational LDRD project team at Sandia National Laboratories successfully demonstrated advanced technologies for mitigating drillstring vibrations to improve the reliability of drilling systems used for construction of deep, high-value wells. Using computational modeling and dynamic substructuring techniques, the benefit of controllable actuators at discrete locations in the drillstring is determined. Prototype downhole tools were developed and evaluated in laboratory test fixtures simulating the structural dynamic response of a deep drillstring. A laboratory-basedmore » drilling applicability demonstration was conducted to demonstrate the benefit available from deployment of an autonomous, downhole tool with self-actuation capabilities in response to the dynamic response of the host drillstring. A concept is presented for a prototype drilling tool based upon the technical advances. The technology described herein is the subject of U.S. Patent Application No. 62219481, entitled "DRILLING SYSTEM VIBRATION SUPPRESSION SYSTEMS AND METHODS", filed September 16, 2015.« less

Tools for Observation: Art and the Scientific Process

NASA Astrophysics Data System (ADS)

Pettit, E. C.; Coryell-Martin, M.; Maisch, K.

2015-12-01

Art can support the scientific process during different phases of a scientific discovery. Art can help explain and extend the scientific concepts for the general public; in this way art is a powerful tool for communication. Art can aid the scientist in processing and interpreting the data towards an understanding of the concepts and processes; in this way art is powerful - if often subconscious - tool to inform the process of discovery. Less often acknowledged, art can help engage students and inspire scientists during the initial development of ideas, observations, and questions; in this way art is a powerful tool to develop scientific questions and hypotheses. When we use art as a tool for communication of scientific discoveries, it helps break down barriers and makes science concepts less intimidating and more accessible and understandable for the learner. Scientists themselves use artistic concepts and processes - directly or indirectly - to help deepen their understanding. Teachers are following suit by using art more to stimulate students' creative thinking and problem solving. We show the value of teaching students to use the artistic "way of seeing" to develop their skills in observation, questioning, and critical thinking. In this way, art can be a powerful tool to engage students (from elementary to graduate) in the beginning phase of a scientific discovery, which is catalyzed by inquiry and curiosity. Through qualitative assessment of the Girls on Ice program, we show that many of the specific techniques taught by art teachers are valuable for science students to develop their observation skills. In particular, the concepts of contour drawing, squinting, gesture drawing, inverted drawing, and others can provide valuable training for student scientists. These art techniques encourage students to let go of preconceptions and "see" the world (the "data") in new ways they help students focus on both large-scale patterns and small-scale details.

Development of a stereoscopic three-dimensional drawing application

NASA Astrophysics Data System (ADS)

Carver, Donald E.; McAllister, David F.

1991-08-01

With recent advances in 3-D technology, computer users have the opportunity to work within a natural 3-D environment; a flat panel LCD computer display of this type, the DTI-100M made by Dimension Technologies, Inc., recently went on the market. In a joint venture between DTI and NCSU, an object-oriented 3-D drawing application, 3-D Draw, was developed to address some issues of human interface design for interactive stereo drawing applications. The focus of this paper is to determine some of the procedures a user would naturally expect to follow while working within a true 3-D environment. The paper discusses (1) the interface between the Macintosh II and DTI-100M during implementation of 3-D Draw, including stereo cursor development and presentation of current 2-D systems, with an additional `depth'' parameter, in the 3-D world, (2) problems in general for human interface into the 3-D environment, and (3) necessary functions and/or problems in developing future stereoscopic 3-D operating systems/tools.

Can surgical simulation be used to train detection and classification of neural networks?

PubMed

Zisimopoulos, Odysseas; Flouty, Evangello; Stacey, Mark; Muscroft, Sam; Giataganas, Petros; Nehme, Jean; Chow, Andre; Stoyanov, Danail

2017-10-01

Computer-assisted interventions (CAI) aim to increase the effectiveness, precision and repeatability of procedures to improve surgical outcomes. The presence and motion of surgical tools is a key information input for CAI surgical phase recognition algorithms. Vision-based tool detection and recognition approaches are an attractive solution and can be designed to take advantage of the powerful deep learning paradigm that is rapidly advancing image recognition and classification. The challenge for such algorithms is the availability and quality of labelled data used for training. In this Letter, surgical simulation is used to train tool detection and segmentation based on deep convolutional neural networks and generative adversarial networks. The authors experiment with two network architectures for image segmentation in tool classes commonly encountered during cataract surgery. A commercially-available simulator is used to create a simulated cataract dataset for training models prior to performing transfer learning on real surgical data. To the best of authors' knowledge, this is the first attempt to train deep learning models for surgical instrument detection on simulated data while demonstrating promising results to generalise on real data. Results indicate that simulated data does have some potential for training advanced classification methods for CAI systems.

Data fusion for CD metrology: heterogeneous hybridization of scatterometry, CDSEM, and AFM data

NASA Astrophysics Data System (ADS)

Hazart, J.; Chesneau, N.; Evin, G.; Largent, A.; Derville, A.; Thérèse, R.; Bos, S.; Bouyssou, R.; Dezauzier, C.; Foucher, J.

2014-04-01

The manufacturing of next generation semiconductor devices forces metrology tool providers for an exceptional effort in order to meet the requirements for precision, accuracy and throughput stated in the ITRS. In the past years hybrid metrology (based on data fusion theories) has been investigated as a new methodology for advanced metrology [1][2][3]. This paper provides a new point of view of data fusion for metrology through some experiments and simulations. The techniques are presented concretely in terms of equations to be solved. The first point of view is High Level Fusion which is the use of simple numbers with their associated uncertainty postprocessed by tools. In this paper, it is divided into two stages: one for calibration to reach accuracy, the second to reach precision thanks to Bayesian Fusion. From our perspective, the first stage is mandatory before applying the second stage which is commonly presented [1]. However a reference metrology system is necessary for this fusion. So, precision can be improved if and only if the tools to be fused are perfectly matched at least for some parameters. We provide a methodology similar to a multidimensional TMU able to perform this matching exercise. It is demonstrated on a 28 nm node backend lithography case. The second point of view is Deep Level Fusion which works on the contrary with raw data and their combination. In the approach presented here, the analysis of each raw data is based on a parametric model and connections between the parameters of each tool. In order to allow OCD/SEM Deep Level Fusion, a SEM Compact Model derived from [4] has been developed and compared to AFM. As far as we know, this is the first time such techniques have been coupled at Deep Level. A numerical study on the case of a simple stack for lithography is performed. We show strict equivalence of Deep Level Fusion and High Level Fusion when tools are sensitive and models are perfect. When one of the tools can be considered as a reference and the second is biased, High Level Fusion is far superior to standard Deep Level Fusion. Otherwise, only the second stage of High Level Fusion is possible (Bayesian Fusion) and do not provide substantial advantage. Finally, when OCD is equipped with methods for bias detection [5], Deep Level Fusion outclasses the two-stage High Level Fusion and will benefit to the industry for most advanced nodes production.

Associations between pain drawing and psychological characteristics of different body region pains.

PubMed

Hayashi, Kazuhiro; Arai, Young-Chang P; Morimoto, Atsuko; Aono, Shuichi; Yoshimoto, Takahiko; Nishihara, Makoto; Osuga, Tomoaki; Inoue, Shinsuke; Ushida, Takahiro

2015-04-01

Pain drawings have frequently been used for documentation of pain and a convenient diagnosis tool. Pain drawings were found to be associated with psychological states in chronic patients with low back pain. Few researchers have investigated pain drawings except in low back pain. The aim of this study was to investigate the pain, pain drawings, psychological characteristics, and pain interference in the head, neck-shoulder (NS), and low-back/lower-limb (LB-LL) regions among patients with chronic pain. We included a total of 291 patients with new chronic pain (headache, 62; NS pain, 87; LB-LL pain, 142). The pain drawings and scores of 10-cm Visual Analogue Scale (VAS), Hospital Anxiety and Depression Scale (HADS), Pain Catastrophizing Scale (PCS), Short-Form McGill Pain Questionnaire (SF-MPQ), and Pain Disability Assessment Scale (PDAS) were extracted from medical records. A subset of 60 pain drawings was scored by senior and junior evaluators to assess inter-rater agreement. We investigated the correlation between pain drawings and VAS, HADS, PCS, SF-MPQ, and PDAS in each body region group at the initial visit. Moreover, almost all patients received nonsurgical treatment as a follow-up and were investigated using VAS after treatment. The reliability of pain drawings was substantial with an interevaluator reliability in headache, NS, and LB-LL pain. Nonorganic pain drawings were associated with psychological disturbances in NS and LB-LL pain, but not headache. Poor outcomes were associated with nonorganic drawings in LB-LL pain, but not in the case of headache or NS pain. Our results suggest that the characteristics of patients with nonorganic drawings differ according to body regions. © 2014 World Institute of Pain.

High power laser downhole cutting tools and systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zediker, Mark S; Rinzler, Charles C; Faircloth, Brian O

Downhole cutting systems, devices and methods for utilizing 10 kW or more laser energy transmitted deep into the earth with the suppression of associated nonlinear phenomena. Systems and devices for the laser cutting operations within a borehole in the earth. These systems and devices can deliver high power laser energy down a deep borehole, while maintaining the high power to perform cutting operations in such boreholes deep within the earth.

Advances in deep-UV processing using cluster tools

NASA Astrophysics Data System (ADS)

Escher, Gary C.; Tepolt, Gary; Mohondro, Robert D.

1993-09-01

Deep-UV laser lithography has shown the capability of supporting the manufacture of multiple generations of integrated circuits (ICs) due to its wide process latitude and depth of focus (DOF) for 0.2 micrometers to 0.5 micrometers feature sizes. This capability has been attained through improvements in deep-UV wide field lens technology, excimer lasers, steppers and chemically amplified, positive deep-UV resists. Chemically amplified deep-UV resists are required for 248 nm lithography due to the poor absorption and sensitivity of conventional novolac resists. The acid catalyzation processes of the new resists requires control of the thermal history and environmental conditions of the lithographic process. Work is currently underway at several resist vendors to reduce the need for these controls, but practical manufacturing solutions exist today. One of these solutions is the integration of steppers and resist tracks into a `cluster tool' or `Lithocell' to insure a consistent thermal profile for the resist process and reduce the time the resist is exposed to atmospheric contamination. The work here reports processing and system integration results with a Machine Technology, Inc (MTI) post-exposure bake (PEB) track interfaced with an advanced GCA XLS 7800 deep-UV stepper [31 mm diameter, variable NA (0.35 - 0.53) and variable sigma (0.3 - 0.74)].

Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel

NASA Astrophysics Data System (ADS)

Çiçek, Adem; Kara, Fuat; Kıvak, Turgay; Ekici, Ergün; Uygur, İlyas

2015-11-01

In this study, a number of wear and tensile tests were performed to elucidate the effects of deep cryogenic treatment on the wear behavior and mechanical properties (hardness and tensile strength) of AISI H13 tool steel. In accordance with this purpose, three different heat treatments (conventional heat treatment (CHT), deep cryogenic treatment (DCT), and deep cryogenic treatment and tempering (DCTT)) were applied to tool steel samples. DCT and DCTT samples were held in nitrogen gas at -145 °C for 24 h. Wear tests were conducted on a dry pin-on-disk device using two loads of 60 and 80 N, two sliding velocities of 0.8 and 1 m/s, and a wear distance of 1000 m. All test results showed that DCT improved the adhesive wear resistance and mechanical properties of AISI H13 steel. The formation of small-sized and uniformly distributed carbide particles and the transformation of retained austenite to martensite played an important role in the improvements in the wear resistance and mechanical properties. After cleavage fracture, the surfaces of all samples were characterized by the cracking of primary carbides, while the DCT and DCTT samples displayed microvoid formation by decohesion of the fine carbides precipitated during the cryo-tempering process.

In situ Detection of Microbial Life in the Deep Biosphere in Igneous Ocean Crust.

PubMed

Salas, Everett C; Bhartia, Rohit; Anderson, Louise; Hug, William F; Reid, Ray D; Iturrino, Gerardo; Edwards, Katrina J

2015-01-01

The deep biosphere is a major frontier to science. Recent studies have shown the presence and activity of cells in deep marine sediments and in the continental deep biosphere. Volcanic lavas in the deep ocean subsurface, through which substantial fluid flow occurs, present another potentially massive deep biosphere. We present results from the deployment of a novel in situ logging tool designed to detect microbial life harbored in a deep, native, borehole environment within igneous oceanic crust, using deep ultraviolet native fluorescence spectroscopy. Results demonstrate the predominance of microbial-like signatures within the borehole environment, with densities in the range of 10(5) cells/mL. Based on transport and flux models, we estimate that such a concentration of microbial cells could not be supported by transport through the crust, suggesting in situ growth of these communities.

Transmission, Transformation and Ritual: An Investigation of Students' and Researchers' Digitally Mediated Communications and Collaborative Work

ERIC Educational Resources Information Center

Timmis, Sue; Joubert, Marie; Manuel, Anne; Barnes, Sally

2010-01-01

This article explores the use of multiple digital tools for mediating communications, drawing on two recent empirical studies in which students and researchers in UK higher education worked on collaborative activities: how different tools were used and the quality of the communications and their contributions to collaborative working and knowledge…

Metaphor as a Methodological Tool: Identifying Teachers' Social Justice Dispositions across Diverse Secondary School Settings

ERIC Educational Resources Information Center

Mills, Carmen; Molla, Tebeje; Gale, Trevor; Cross, Russell; Parker, Stephen; Smith, Catherine

2017-01-01

This article investigates the social justice dispositions of teachers and principals in secondary schools as inferred from their metaphoric expressions. Drawing on a Bourdieuian account of disposition, our focus is the use of metaphor as a methodological tool to identify and reveal these otherwise latent forces within our data. Our analysis shows…

Thriving as a New Teacher: Tools and Strategies for Your First Year

ERIC Educational Resources Information Center

Eller, John F.; Eller, Sheila A.

2016-01-01

Discover strategies and tools for new teacher success. In this user-friendly guide, the authors draw from best practice and their extensive experience to identify the necessary skills and characteristics to thrive as a new educator. Explore the six critical areas related to teaching that most impact new teachers and their students, from…

The Complexity of Learning: Exploring the Interplay of Different Mediational Means in Group Learning with Digital Tools

ERIC Educational Resources Information Center

Engeness, Irina; Edwards, Anne

2017-01-01

The relationship between the different mediational means for supporting students' learning with digital tools in science group work in a Norwegian lower-secondary school is examined. Analyses of teacher-student and student-student interactions are located in cultural-historical theory and draw on Galperin's conceptualisation of learning processes.…

Parents' Past Experiences as a Mediational Tool for Understanding Their Child's Current Mathematical Learning

ERIC Educational Resources Information Center

O'Toole, Sarah; de Abreu, Guida

2005-01-01

This article explores the ways in which parents use their own past experiences as a mediational tool for understanding their child's current school learning. Following a sociocultural approach parents' past experiences were examined drawing on the notions of (1) heterochronicity, which looks at the partially overlapping histories of the individual…

An Experiment in Mind-Mapping and Argument-Mapping: Tools for Assessing Outcomes in the Business Curriculum

ERIC Educational Resources Information Center

Gargouri, Chanaz; Naatus, Mary Kate

2017-01-01

Distinguished from other teaching-learning tools, such as mind and concept mapping in which students draw pictures and concepts and show relationships and correlation between them to demonstrate their own understanding of complex concepts, argument mapping is used to demonstrate clarity of reasoning, based on supporting evidence, and come to a…

Connecting Research to Teaching: Evaluating and Writing Dynamic Geometry Tasks

ERIC Educational Resources Information Center

Trocki, Aaron

2014-01-01

The advent of dynamic geometry software has changed the way students draw, construct, and measure by using virtual tools instead of or along with physical tools. Use of technology in general and of dynamic geometry in particular has gained traction in mathematics education, as evidenced in the Common Core State Standards for Mathematics (CCSSI…

The Adoption of Mark-Up Tools in an Interactive e-Textbook Reader

ERIC Educational Resources Information Center

Van Horne, Sam; Russell, Jae-eun; Schuh, Kathy L.

2016-01-01

Researchers have more often examined whether students prefer using an e-textbook over a paper textbook or whether e-textbooks provide a better resource for learning than paper textbooks, but students' adoption of mark-up tools has remained relatively unexamined. Drawing on the concept of Innovation Diffusion Theory, we used educational data mining…

Bridging the Design-Science Gap with Tools: Science Learning and Design Behaviors in a Simulated Environment for Engineering Design

ERIC Educational Resources Information Center

Chao, Jie; Xie, Charles; Nourian, Saeid; Chen, Guanhua; Bailey, Siobhan; Goldstein, Molly H.; Purzer, Senay; Adams, Robin S.; Tutwiler, M. Shane

2017-01-01

Many pedagogical innovations aim to integrate engineering design and science learning. However, students frequently show little attempt or have difficulties in connecting their design projects with the underlying science. Drawing upon the Cultural-Historical Activity Theory, we argue that the design tools available in a learning environment…

Digital Doctorates? An Exploratory Study of PhD Candidates' Use of Online Tools

ERIC Educational Resources Information Center

Dowling, Robyn; Wilson, Michael

2017-01-01

Online environments are transforming learning, including doctoral education. Yet the ways in which the PhD experience is shaped and transformed through these digital modes of engagement is seldom addressed, and not systematically understood. In this article, we explore PhD students' perceptions and use of digital tools. Drawing on the results of…

GEsture: an online hand-drawing tool for gene expression pattern search.

PubMed

Wang, Chunyan; Xu, Yiqing; Wang, Xuelin; Zhang, Li; Wei, Suyun; Ye, Qiaolin; Zhu, Youxiang; Yin, Hengfu; Nainwal, Manoj; Tanon-Reyes, Luis; Cheng, Feng; Yin, Tongming; Ye, Ning

2018-01-01

Gene expression profiling data provide useful information for the investigation of biological function and process. However, identifying a specific expression pattern from extensive time series gene expression data is not an easy task. Clustering, a popular method, is often used to classify similar expression genes, however, genes with a 'desirable' or 'user-defined' pattern cannot be efficiently detected by clustering methods. To address these limitations, we developed an online tool called GEsture. Users can draw, or graph a curve using a mouse instead of inputting abstract parameters of clustering methods. GEsture explores genes showing similar, opposite and time-delay expression patterns with a gene expression curve as input from time series datasets. We presented three examples that illustrate the capacity of GEsture in gene hunting while following users' requirements. GEsture also provides visualization tools (such as expression pattern figure, heat map and correlation network) to display the searching results. The result outputs may provide useful information for researchers to understand the targets, function and biological processes of the involved genes.

Engaging Middle School Students with Google Earth Technology to Analyze Ocean Cores as Evidence for Sea Floor Spreading

NASA Astrophysics Data System (ADS)

Prouhet, T.; Cook, J.

2006-12-01

Google Earth's ability to captivate students' attention, its ease of use, and its high quality images give it the potential to be an extremely effective tool for earth science educators. The unique properties of Google Earth satisfy a growing demand to incorporate technology in science instruction. Google Earth is free and relatively easy to use unlike some other visualization software. Students often have difficulty conceptualizing and visualizing earth systems, such as deep-ocean basins, because of the complexity and dynamic nature of the processes associated with them (e.g. plate tectonics). Google Earth's combination of aerial photography, satellite images and remote sensing data brings a sense of realism to science concepts. The unobstructed view of the ocean floor provided by this technology illustrates three-dimensional subsurface features such as rift valleys, subduction zones, and sea-mounts enabling students to better understand the seafloor's dynamic nature. Students will use Google Earth to navigate the sea floor, and examine Deep Sea Drilling Project (DSDP) core locations the from the Glomar Challenger Leg 3 expedition. The lesson to be implemented was expanded upon and derived from the Joint Oceanographic Insitute (JOI) Learning exercise, Nannofossils Reveal Seafloor Spreading. In addition, students take on the role of scientists as they graph and analyze paleontological data against the distance from the Mid Ocean Ridge. The integration of ocean core data in this three-dimensional view aids students' ability to draw and communicate valid conclusions about their scientific observations. A pre and post survey will be given to examine attitudes, self-efficacy, achievement and content mastery to a sample of approximately 300 eighth grade science students. The hypothesis is that the integration of Google Earth will significantly improve all areas of focus as mentioned above.

Computations in the deep vs superficial layers of the cerebral cortex.

PubMed

Rolls, Edmund T; Mills, W Patrick C

2017-11-01

A fundamental question is how the cerebral neocortex operates functionally, computationally. The cerebral neocortex with its superficial and deep layers and highly developed recurrent collateral systems that provide a basis for memory-related processing might perform somewhat different computations in the superficial and deep layers. Here we take into account the quantitative connectivity within and between laminae. Using integrate-and-fire neuronal network simulations that incorporate this connectivity, we first show that attractor networks implemented in the deep layers that are activated by the superficial layers could be partly independent in that the deep layers might have a different time course, which might because of adaptation be more transient and useful for outputs from the neocortex. In contrast the superficial layers could implement more prolonged firing, useful for slow learning and for short-term memory. Second, we show that a different type of computation could in principle be performed in the superficial and deep layers, by showing that the superficial layers could operate as a discrete attractor network useful for categorisation and feeding information forward up a cortical hierarchy, whereas the deep layers could operate as a continuous attractor network useful for providing a spatially and temporally smooth output to output systems in the brain. A key advance is that we draw attention to the functions of the recurrent collateral connections between cortical pyramidal cells, often omitted in canonical models of the neocortex, and address principles of operation of the neocortex by which the superficial and deep layers might be specialized for different types of attractor-related memory functions implemented by the recurrent collaterals. Copyright © 2017 Elsevier Inc. All rights reserved.

Precise Electrochemical Drilling of Repeated Deep Holes

NASA Technical Reports Server (NTRS)

Kincheloe, J. P.

1985-01-01

Tooling enables maintenance of close tolerances. Tooling includes guide that holds electrochemical drilling electrodes in proper relative alinement and guide-positioning fixture clamps directly on reference surfaces of strut. High precision achieved by positioning tooling anew on each strut before drilling: Tolerances of (0.008 mm) maintained in some details.

The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures.

PubMed

Ceroni, Alessio; Dell, Anne; Haslam, Stuart M

2007-08-07

Carbohydrates play a critical role in human diseases and their potential utility as biomarkers for pathological conditions is a major driver for characterization of the glycome. However, the additional complexity of glycans compared to proteins and nucleic acids has slowed the advancement of glycomics in comparison to genomics and proteomics. The branched nature of carbohydrates, the great diversity of their constituents and the numerous alternative symbolic notations, make the input and display of glycans not as straightforward as for example the amino-acid sequence of a protein. Every glycoinformatic tool providing a user interface would benefit from a fast, intuitive, appealing mechanism for input and output of glycan structures in a computer readable format. A software tool for building and displaying glycan structures using a chosen symbolic notation is described here. The "GlycanBuilder" uses an automatic rendering algorithm to draw the saccharide symbols and to place them on the drawing board. The information about the symbolic notation is derived from a configurable graphical model as a set of rules governing the aspect and placement of residues and linkages. The algorithm is able to represent a structure using only few traversals of the tree and is inherently fast. The tool uses an XML format for import and export of encoded structures. The rendering algorithm described here is able to produce high-quality representations of glycan structures in a chosen symbolic notation. The automated rendering process enables the "GlycanBuilder" to be used both as a user-independent component for displaying glycans and as an easy-to-use drawing tool. The "GlycanBuilder" can be integrated in web pages as a Java applet for the visual editing of glycans. The same component is available as a web service to render an encoded structure into a graphical format. Finally, the "GlycanBuilder" can be integrated into other applications to create intuitive and appealing user interfaces: an example is the "GlycoWorkbench", a software tool for assisted annotation of glycan mass spectra. The "GlycanBuilder" represent a flexible, reliable and efficient solution to the problem of input and output of glycan structures in any glycomic tool or database.

Learning terms and definitions: Drawing and the role of elaborative encoding.

PubMed

Wammes, Jeffrey D; Meade, Melissa E; Fernandes, Myra A

2017-09-01

Traditionally, students adopt the strategy of taking written notes when attending a class or learning from a textbook in educational settings. Informed by previous work showing that learning by doing improves memory performance, we examined whether drawing to-be-remembered definitions from university textbooks would improve later memory, relative to a more typical strategy of rote transcription. Participants were asked to either write out the definition, or to draw a picture representative of the definition. Results indicated that drawing, relative to verbatim writing, conferred a reliable memorial benefit that was robust, even when participants' preexisting familiarity with the terms was included as a covariate (in Experiment 1) or when the to-be-remembered terms and definitions were fictitious, thus removing the influence of familiarity (in Experiment 2). We reasoned that drawing likely facilitates retention at least in part because at encoding, participants must retain and elaborate upon information regarding the meaning of the definition, to translate it into a new form (a picture). This is not the case when participants write out the definitions verbatim. In Experiment 3 we showed that paraphrasing during encoding, which, like drawing and in contrast with verbatim writing, requires self-generated elaboration, led to memory performance that was comparable to drawing. Taken together, results suggest that drawing is a powerful tool which improves memory, and that drawing produces a similar level of retention as does paraphrasing. This suggests that elaborative encoding plays a critical role in the memorial benefit that drawing confers to memory for definitions of academic terms. Copyright © 2017 Elsevier B.V. All rights reserved.

Surface temperatures and temperature gradient features of the US Gulf Coast waters

NASA Technical Reports Server (NTRS)

Huh, O. K.; Rouse, L. J., Jr.; Smith, G. W.

1977-01-01

Satellite thermal infrared data on the Gulf of Mexico show that a seasonal cycle exists in the horizontal surface temperature structure. In the fall, the surface temperatures of both coastal and deep waters are nearly uniform. With the onset of winter, atmospheric cold fronts, which are accompanied by dry, low temperature air and strong winds, draw heat from the sea. A band of cooler water forming on the inner shelf expands, until a thermal front develops seaward along the shelf break between the cold shelf waters and the warmer deep waters of the Gulf. Digital analysis of the satellite data was carried out in an interactive mode using a minicomputer and software. A time series of temperature profiles illustrates the temporal and spatial changes in the sea-surface temperature field.

Regulatory sequence analysis tools.

PubMed

van Helden, Jacques

2003-07-01

The web resource Regulatory Sequence Analysis Tools (RSAT) (http://rsat.ulb.ac.be/rsat) offers a collection of software tools dedicated to the prediction of regulatory sites in non-coding DNA sequences. These tools include sequence retrieval, pattern discovery, pattern matching, genome-scale pattern matching, feature-map drawing, random sequence generation and other utilities. Alternative formats are supported for the representation of regulatory motifs (strings or position-specific scoring matrices) and several algorithms are proposed for pattern discovery. RSAT currently holds >100 fully sequenced genomes and these data are regularly updated from GenBank.

New Era of Scientific Ocean Drilling

NASA Astrophysics Data System (ADS)

Eguchi, N.; Toczko, S.; Sanada, Y.; Igarashi, C.; Kubo, Y.; Maeda, L.; Sawada, I.; Takase, K.; Kyo, N.

2014-12-01

The D/V Chikyu, committed to scientific ocean drilling since 2007, has completed thirteen IODP expeditions, and Chikyu's enhanced drilling technology gives us the means to reach deep targets, enhanced well logging, deep water riserless drilling, and state of the art laboratory. Chikyu recovered core samples from 2466 meters below sea floor (mbsf) in IODP Exp. 337, and drilled to 3058.5 mbsf in IODP Exp. 348, but these are still not the limit of Chikyu's capability. As deep as these depths are, they are just halfway to the 5200 mbsf plate boundary target for the NanTroSEIZE deep riser borehole. There are several active IODP proposals in the pipeline. Each has scientific targets requiring several thousand meters of penetration below the sea floor. Riser technology is the only way to collect samples and data from that depth. Well logging has been enhanced with the adoption of riser drilling, especially for logging-while-drilling (LWD). LWD has several advantages over wireline logging, and provides more opportunities for continuous measurements even in unstable boreholes. Because of the larger diameter of riser pipes and enhanced borehole stability, Chikyu can use several state-of-the-art downhole tools, e.g. fracture tester, fluid sampling tool, wider borehole imaging, and the latest sonic tools. These new technologies and tools can potentially expand the envelope of scientific ocean drilling. Chikyu gives us access to ultra-deep water riserless drilling. IODP Exp. 343/343T investigating the March 2011 Tohoku Oki Earthquake, explored the toe of the landward slope of the Japan Trench. This expedition reached the plate boundary fault target at more than 800 mbsf in water depths over 6900 m for logging-while-drilling, coring, and observatory installation. This deep-water drilling capability also expands the scientific ocean drilling envelope and provides access to previously unreachable targets. On top of these operational capabilities, Chikyu's onboard laboratory is equipped with state-of-the-art instruments to analyze all science samples. X-ray CT creates non-destructive 3D images of core samples providing high resolution structural detail. The microbiology laboratory offers clean and contamination-free work environments required for microbiological samples.

Effect of cryogenic treatment on microstructure, mechanical and wear behaviors of AISI H13 hot work tool steel

NASA Astrophysics Data System (ADS)

Koneshlou, Mahdi; Meshinchi Asl, Kaveh; Khomamizadeh, Farzad

2011-01-01

This paper focuses on the effects of low temperature (subzero) treatments on microstructure and mechanical properties of H13 hot work tool steel. Cryogenic treatment at -72 °C and deep cryogenic treatment at -196 °C were applied and it was found that by applying the subzero treatments, the retained austenite was transformed to martensite. As the temperature was decreased more retained austenite was transformed to martensite and it also led to smaller and more uniform martensite laths distributed in the microstructure. The deep cryogenic treatment also resulted in precipitation of more uniform and very fine carbide particles. The microstructural modification resulted in a significant improvement on the mechanical properties of the H13 tool steel.

Deep machine learning based Image classification in hard disk drive manufacturing (Conference Presentation)

NASA Astrophysics Data System (ADS)

Rana, Narender; Chien, Chester

2018-03-01

A key sensor element in a Hard Disk Drive (HDD) is the read-write head device. The device is complex 3D shape and its fabrication requires over thousand process steps with many of them being various types of image inspection and critical dimension (CD) metrology steps. In order to have high yield of devices across a wafer, very tight inspection and metrology specifications are implemented. Many images are collected on a wafer and inspected for various types of defects and in CD metrology the quality of image impacts the CD measurements. Metrology noise need to be minimized in CD metrology to get better estimate of the process related variations for implementing robust process controls. Though there are specialized tools available for defect inspection and review allowing classification and statistics. However, due to unavailability of such advanced tools or other reasons, many times images need to be manually inspected. SEM Image inspection and CD-SEM metrology tools are different tools differing in software as well. SEM Image inspection and CD-SEM metrology tools are separate tools differing in software and purpose. There have been cases where a significant numbers of CD-SEM images are blurred or have some artefact and there is a need for image inspection along with the CD measurement. Tool may not report a practical metric highlighting the quality of image. Not filtering CD from these blurred images will add metrology noise to the CD measurement. An image classifier can be helpful here for filtering such data. This paper presents the use of artificial intelligence in classifying the SEM images. Deep machine learning is used to train a neural network which is then used to classify the new images as blurred and not blurred. Figure 1 shows the image blur artefact and contingency table of classification results from the trained deep neural network. Prediction accuracy of 94.9 % was achieved in the first model. Paper covers other such applications of the deep neural network in image classification for inspection, review and metrology.

In situ Detection of Microbial Life in the Deep Biosphere in Igneous Ocean Crust

PubMed Central

Salas, Everett C.; Bhartia, Rohit; Anderson, Louise; Hug, William F.; Reid, Ray D.; Iturrino, Gerardo; Edwards, Katrina J.

2015-01-01

The deep biosphere is a major frontier to science. Recent studies have shown the presence and activity of cells in deep marine sediments and in the continental deep biosphere. Volcanic lavas in the deep ocean subsurface, through which substantial fluid flow occurs, present another potentially massive deep biosphere. We present results from the deployment of a novel in situ logging tool designed to detect microbial life harbored in a deep, native, borehole environment within igneous oceanic crust, using deep ultraviolet native fluorescence spectroscopy. Results demonstrate the predominance of microbial-like signatures within the borehole environment, with densities in the range of 105 cells/mL. Based on transport and flux models, we estimate that such a concentration of microbial cells could not be supported by transport through the crust, suggesting in situ growth of these communities. PMID:26617595

MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Cognitive Bargaining Model: An Analysis Tool for Third Party Incentives?

DTIC Science & Technology

2009-12-01

catalytic by reducing any rally-around-the-flag effect in the target state, bolstering the business class (“commercial bourgeoisie ”), which typically is...9. 136 “Donors Drawing Up Plans for CIS Aid,” Agence France Presse, May 23, 1992. 137 RusData Dialine, “USA—Ukraine: Buy Anytime You Like,” BizEkon...2009). Agence France Presse. “Donors Drawing Up Plans for CIS Aid.” May 23, 1992. Aslund, Anders. How Ukraine Became a Market Economy and

The Photonovel: A Tool for Development. Program and Training Journal Manual Series Number 4.

ERIC Educational Resources Information Center

Weaks, Daniel

Designed as a working and teaching tool for development workers, this manual includes the step-by-step process for preparing a photonovel. Chapter 1 introduces the photonovel, a blend of comic book and motion picture that substitutes photographs for the stylized drawings. It lists its advantages and disadvantages as an educational medium and tool…

Understanding Emotions as Situated, Embodied, and Fissured: Thinking with Theory to Create an Analytical Tool

ERIC Educational Resources Information Center

Kuby, Candace R.

2014-01-01

An emerging theoretical perspective is that emotions are a verb or something we do in relation to others. Studies that demonstrate ways to analyze emotions from a performative stance are scarce. In this article, a new analytical tool is introduced; a critical performative analysis of emotion (CPAE) that draws upon three theoretical perspectives:…

Open Educational Resources: Tools to Help 21st Century Students Achieve Their Postsecondary Education Goals and Keep America Competitive

ERIC Educational Resources Information Center

Center for American Progress, 2012

2012-01-01

Open courseware and other open educational resources are beginning to draw the attention of higher education policymakers and other leaders. These web-based educational tools hold the promise of both reducing the cost of higher education and helping learners to complete their degrees by providing access to top quality course materials and…

[Sustainable development finds its place in the hospital].

PubMed

Fraleux, Dorothée

2012-01-01

Driven by the Committee of Sustainable Development in Healthcare, an association founded in 2006, a real momentum of sustainable development in hospitals has been instigated. Drawing on a variety of approaches, sustainable development in hospitals goes hand in hand with modernity and is based on practical tools such as the self-diagnosis tool used as an indicator of sustainable development in healthcare.

Teach Students to Dig for Understanding Using an Unexpected Technological Shovel

ERIC Educational Resources Information Center

Lake, Susan E. L.

2004-01-01

Online genealogy tools is an unexpected resource as these tools not only serve valuable for genealogy research, but also can be used by students to learn about their country's past and learn to use primary materials to draw conclusions. Some of these Online sources like the 1880 census available at www.ancestry.com, www.thepastwhispers.com, which…

The problem of resonance in technology usage

NASA Technical Reports Server (NTRS)

Sayani, H. H.; Svoboda, C. P.

1981-01-01

Various information system tools and techniques are analyzed. A case study is presented which draws together the issues raised in three distinct cases. This case study shows a typical progression from the selection of an analysis methodology, to the adoption of an automated tool for specification and documentation, and the difficulty of fitting these into an existing life cycle development methodology.

Development of a Virtual Tool for Learning Basic Organisation and Planning in Rural Engineering Projects

ERIC Educational Resources Information Center

Redel-Macías, María Dolores; Castillo, Carlos; Aguilar Porro, Cristina; Polo, María; Taguas, Encarnación V.

2014-01-01

This paper presents a virtual lab for the contents of an Engineering project, for designing an agro-industrial building, which is also useful for a range of different transversal courses in Engineering sciences. The aims of this tool are to analyse the most important contents of a project-document (calculation, regulations, drawings and budgets),…

Building Bridges: The Use of Reflective Oral Diaries as a Qualitative Research Tool

ERIC Educational Resources Information Center

Hewitt, Elizabeth

2017-01-01

The article is a reflection on the use of an oral diary as a qualitative research tool, the role that it played during fieldwork and the methodological issues that emerged. It draws on a small-scale empirical study into primary school teachers' use of group discussion, during which oral diaries were used to explore and document teacher reflective…

Mediated Authentic Video: A Flexible Tool Supporting a Developmental Approach to Teacher Education

ERIC Educational Resources Information Center

Stutchbury, Kris; Woodward, Clare

2017-01-01

YouTube now has more searches than Google, indicating that video is a motivating and, potentially, powerful learning tool. This paper investigates how we can embrace video to support improvements in teacher education. It will draw on innovative approaches to teacher education, developed by the Open University UK, in order to explore in more depth…

HANDBOOK: ASSESSING THE FATE OF DEEP-WELL-INJECTED HAZARDOUS WASTE. Summaries of Recent Research

EPA Science Inventory

This handbook has been developed for use as a reference tool in evaluating the suitability of disposing of specific hazardous wastes in deep injection wells. sers of the document will get a better understanding of the factors that affect 1) geochemical waste-reservoir reactions o...

A Whale of a Tale: Creating Spacecraft Telemetry Data Analysis Products for the Deep Impact Mission

NASA Technical Reports Server (NTRS)

Sturdevant, Kathryn F.; Wright, Jesse J.; Lighty, Roger A.; Nakamura, Lori L.

2006-01-01

This paper describes some of the challenges and lessons learned from the Deep Impact (DI) Mission Ground Data System's (GDS) telemetry data processing and product generation tool, nicknamed 'Whale.' One of the challenges of any mission is to analyze testbed and operational telemetry data. Methods to retrieve this data to date have required spacecraft subsystem members to become experts in the use of a myriad of query and plot tools. As budgets shrink, and the GDS teams grow smaller, more of the burden to understand these tools falls on the users. The user base also varies from novice to expert, and requiring them to become GDS tool experts in addition to spacecraft domain experts is an undue burden. The "Whale" approach is to process all of the data for a given spacecraft test, and provide each subsystem with plots and data products 'automagically.'.

Chlorine condenser-evaporator simulation

NASA Astrophysics Data System (ADS)

Muraveva, E. A.

2017-10-01

Refrigeration machines are an integral part of chemical engineering. Coldness in mechanical engineering is used to improve the properties of steels, to stabilize the shape and size of steel parts, to restore the dimensions of worn steel hardened parts, to fasten the parts to be machined during cutting and grinding, to ensure fixed planting during assembly, bending pipelines, deep drawing and stamping parts from sheet materials, in the manufacture and processing of rubber parts, with solid anodizing of aluminum alloy parts.

Metal flow of a tailor-welded blank in deep drawing process

NASA Astrophysics Data System (ADS)

Yan, Qi; Guo, Ruiquan

2005-01-01

Tailor welded blanks were used in the automotive industry to consolidate parts, reduce weight, and increase safety. In recent years, this technology was developing rapidly in China. In Chinese car models, tailor welded blanks had been applied in a lot of automobile parts such as rail, door inner, bumper, floor panel, etc. Concerns on the properties of tailor welded blanks had become more and more important for automobile industry. A lot of research had shown that the strength of the welded seam was higher than that of the base metal, such that the weld failure in the aspect of strength was not a critical issue. However, formability of tailor welded blanks in the stamping process was complex. Among them, the metal flow of tailor welded blanks in the stamping process must be investigated thoroughly in order to reduce the scrap rate during the stamping process in automobile factories. In this paper, the behavior of metal flow for tailor welded blanks made by the laser welding process with two types of different thickness combinations were studied in the deep drawing process. Simulations and experiment verification of the movement of weld line for tailor welded blanks were discussed in detail. Results showed that the control on the movement of welded seam during stamping process by taking some measures in the aspect of blank holder was effective.

Drawing rocks at primary school: a tool for emerging misconceptions and promoting conceptual change

NASA Astrophysics Data System (ADS)

Benciolini, L.; Muscio, G.

2012-04-01

Drawing rocks at primary school: a tool for emerging misconceptions and promoting conceptual change Luca Benciolini Dipartimento di Fisica, Chimica e Ambiente, Università di Udine (Italy) and Giuseppe Muscio Museo Friulano di Storia Naturale (Udine, Italy) In order to investigate spontaneous ideas of children about rock samples, the Museo Friulano di Storia Naturale in collaboration with the Università di Udine submitted six classrooms of fifth and fourth grade-students to a specific test. One hundred thirty-three students without a specific background in Earth Sciences were asked to give a) a written description of a rock sample; b) a drawing of the sample; c) a written short story about the sample. The selected thirty-five samples in the opinion of the researchers contain 255 geologically relevant self-evident characters such as fossils, clastic textures, planar discontinuities and so on. Childs spontaneously described 209 geological characters. Forty-seven fifth-grade students (group A) have been previously followed specific training in multisensory description of objects and observed the 90% of the geologically relevant characters. Group B (forty-three fifth-grade) and group C (forty-three fourth-grade) on the contrary, without any previous instructions discovered the 77%. In order to follow childs building their knowledge through experience we found that the main problem was the lack of consistency between written and drawing description. Heterogeneities as evident as a magmatic contact have been correctly represented by the drawing but it has not been worth of any attention in the written description. On the contrary, written description may sometimes contain careful description of the clastic sedimentary process but these criteria are applied for example to a travertine, without any relations with observed characters. Descriptions and drawing of rock outcrops performed by university students demonstrate the persistence of this attitude. Thus, groups B and C were then asked to describe their drawings. We found encouraging progress stimulated by thinking on their own work. We suggest that drawing activities and laboratory book notes could represent useful strategies in order to stimulate specific skill in observing reality, and to understand complex and heterogeneous natural objects. Conceptual change is promoted by comparing children experiences with their previous ideas.

A Participative Tool for Sharing, Annotating and Archiving Submarine Video Data

NASA Astrophysics Data System (ADS)

Marcon, Y.; Kottmann, R.; Ratmeyer, V.; Boetius, A.

2016-02-01

Oceans cover more than 70 percent of the Earth's surface and are known to play an essential role on all of the Earth systems and cycles. However, less than 5 percent of the ocean bottom has been explored and many aspects of the deep-sea world remain poorly understood. Increasing our ocean literacy is a necessity in order for specialists and non-specialists to better grasp the roles of the ocean on the Earth's system, its resources, and the impact of human activities on it. Due to technological advances, deep-sea research produces ever-increasing amounts of scientific video data. However, using such data for science communication and public outreach purposes remains difficult as tools for accessing/sharing such scientific data are often lacking. Indeed, there is no common solution for the management and analysis of marine video data, which are often scattered across multiple research institutes or working groups and it is difficult to get an overview of the whereabouts of those data. The VIDLIB Deep-Sea Video Platform is a web-based tool for sharing/annotating time-coded deep-sea video data. VIDLIB provides a participatory way to share and analyze video data. Scientists can share expert knowledge for video analysis without the need to upload/download large video files. Also, VIDLIB offers streaming capabilities and has potential for participatory science and science communication in that non-specialists can ask questions on what they see and get answers from scientists. Such a tool is highly valuable in terms of scientific public outreach and popular science. Video data are by far the most efficient way to communicate scientific findings to a non-expert public. VIDLIB is being used for studying the impact of deep-sea mining on benthic communities as well as for exploration in polar regions. We will present the structure and workflow of VIDLIB as well as an example of video analysis. VIDLIB (http://vidlib.marum.de) is funded by the EU EUROFLEET project and the Helmholtz Alliance ROBEX.

The use of natural language processing on pediatric diagnostic radiology reports in the electronic health record to identify deep venous thrombosis in children.

PubMed

Gálvez, Jorge A; Pappas, Janine M; Ahumada, Luis; Martin, John N; Simpao, Allan F; Rehman, Mohamed A; Witmer, Char

2017-10-01

Venous thromboembolism (VTE) is a potentially life-threatening condition that includes both deep vein thrombosis (DVT) and pulmonary embolism. We sought to improve detection and reporting of children with a new diagnosis of VTE by applying natural language processing (NLP) tools to radiologists' reports. We validated an NLP tool, Reveal NLP (Health Fidelity Inc, San Mateo, CA) and inference rules engine's performance in identifying reports with deep venous thrombosis using a curated set of ultrasound reports. We then configured the NLP tool to scan all available radiology reports on a daily basis for studies that met criteria for VTE between July 1, 2015, and March 31, 2016. The NLP tool and inference rules engine correctly identified 140 out of 144 reports with positive DVT findings and 98 out of 106 negative reports in the validation set. The tool's sensitivity was 97.2% (95% CI 93-99.2%), specificity was 92.5% (95% CI 85.7-96.7%). Subsequently, the NLP tool and inference rules engine processed 6373 radiology reports from 3371 hospital encounters. The NLP tool and inference rules engine identified 178 positive reports and 3193 negative reports with a sensitivity of 82.9% (95% CI 74.8-89.2) and specificity of 97.5% (95% CI 96.9-98). The system functions well as a safety net to screen patients for HA-VTE on a daily basis and offers value as an automated, redundant system. To our knowledge, this is the first pediatric study to apply NLP technology in a prospective manner for HA-VTE identification.

Experimental study on deep hole drilling of 17-4PH material

NASA Astrophysics Data System (ADS)

Uzhanfeng, LI; Uquantai, LI

2018-02-01

This paper uses 17-4PH material as the research object, according to the material characteristics of 17-4PH, designed and carried out deep hole drilling test. The purpose of the experiment is to study and discuss the three major problems of tool wear, chip shape and axial deviation of the hole in the process of deep hole drilling of 17-4PH materials. Through the deep hole drilling test of 17-4PH material, the variation of the chip shape and the deflection of the hole axis was obtained under different wear conditions.

High power laser workover and completion tools and systems

DOEpatents

Zediker, Mark S; Rinzler, Charles C; Faircloth, Brian O; Koblick, Yeshaya; Moxley, Joel F

2014-10-28

Workover and completion systems, devices and methods for utilizing 10 kW or more laser energy transmitted deep into the earth with the suppression of associated nonlinear phenomena. Systems and devices for the laser workover and completion of a borehole in the earth. These systems and devices can deliver high power laser energy down a deep borehole, while maintaining the high power to perform laser workover and completion operations in such boreholes deep within the earth.

DEM modeling of ball mills with experimental validation: influence of contact parameters on charge motion and power draw

NASA Astrophysics Data System (ADS)

Boemer, Dominik; Ponthot, Jean-Philippe

2017-01-01

Discrete element method simulations of a 1:5-scale laboratory ball mill are presented in this paper to study the influence of the contact parameters on the charge motion and the power draw. The position density limit is introduced as an efficient mathematical tool to describe and to compare the macroscopic charge motion in different scenarios, i.a. with different values of the contact parameters. While the charge motion and the power draw are relatively insensitive to the stiffness and the damping coefficient of the linear spring-slider-damper contact law, the coefficient of friction has a strong influence since it controls the sliding propensity of the charge. Based on the experimental calibration and validation by charge motion photographs and power draw measurements, the descriptive and predictive capabilities of the position density limit and the discrete element method are demonstrated, i.e. the real position of the charge is precisely delimited by the respective position density limit and the power draw can be predicted with an accuracy of about 5 %.

Children's human figure drawings do not measure intellectual ability.

PubMed

Willcock, Emma; Imuta, Kana; Hayne, Harlene

2011-11-01

Children typically follow a well-defined series of stages as they learn to draw, but the rate at which they progress through these stages varies from child to child. Some experts have argued that these individual differences in drawing development reflect individual differences in intelligence. Here we assessed the validity of a drawing test that is commonly used to assess children's intellectual abilities. In a single study, 125 5- and 6-year-olds completed the Draw-A-Person: A Quantitative Scoring System (DAP:QSS) and the Wechsler Preschool and Primary Scale of Intelligence-Revised (WPPSI-R) or the Wechsler Abbreviated Scale of Intelligence (WASI). Although there was a statistically significant correlation between scores on the DAP:QSS and scores on the Wechsler tests, when the scores of individual children were examined, the DAP:QSS yielded a high number of false positives and false negatives for low intellectual functioning. We conclude that the DAP:QSS is not a valid measure of intellectual ability and should not be used as a screening tool. Copyright © 2011 Elsevier Inc. All rights reserved.

Patient's Guide to Recovery After Deep Vein Thrombosis or Pulmonary Embolism

MedlinePlus

... Information Disclosures Footnotes Figures & Tables Info & Metrics eLetters Article Tools Print Citation Tools A Patient’s Guide to ... Remember my user name & password. Submit Share this Article Email Thank you for your interest in spreading ...

A Tool for Adopting a Different Perspective on Classroom Observation and Feedback on Science Lessons

ERIC Educational Resources Information Center

Haynes, Lyn

2014-01-01

This article outlines the development of a tool designed to take forward the practice of science teachers through subject-specific guidance and discourse that promotes dialogue and deep critical reflection on practice.

Characteristics of the tree-drawing test in chronic schizophrenia.

PubMed

Kaneda, Ayako; Yasui-Furukori, Norio; Saito, Manabu; Sugawara, Norio; Nakagami, Taku; Furukori, Hanako; Kaneko, Sunao

2010-04-01

A tree-drawing test acts as both a projective psychological examination as well as a supplementary psychodiagnostic tool. There is little information relating the characteristics of schizophrenia and the tree-drawing test. The present study compared the structural and morphological differences in the results of the tree-drawing test between schizophrenic patients and healthy individuals, as well as between schizophrenic patients who responded well to treatment and those who responded poorly. The subjects included 202 chronic schizophrenic patients and 113 healthy individuals. The schizophrenic patients were categorized as 'good responders' or 'poor responders' based on their response to medical treatments. The tree-drawing test was performed on all subjects. The tree drawn by each subject was analyzed structurally and morphologically. There were significant differences between the trunk and branches drawn by schizophrenic patients and those drawn by healthy controls. There were no significant differences between the good responders and the poor responders in any aspect of the tree drawings. Multiple regression models showed that the ratio of the tree area to the total area of the drawing paper, the width of the trunk, the trunk base opening, and the size of the branch ends were significantly associated with schizophrenia. The present study suggests that the trees drawn by schizophrenic patients are significantly different from those drawn by healthy individuals, but among schizophrenic patients, it is difficult to distinguish between good responders and poor responders using the tree-drawing test.

[Effect of the media on the drawings of 14-16 years old adolescents].

PubMed

Hortoványi, Jidit

2015-01-01

Due to the pervasive presence of the Internet, the popularity of social networking sites and the general use of electronic tools in our age, the different idols and celebrities of media, film heroes or fictional characters have become an everyday part of a teenager's communication and cogitation. These themes often appear on adolescent drawings and they are often full of individual content and thus become the forms of self-expression. In my study I draw the attention to this phenomenon by presenting some examples. One characteristic area of it is when teenagers fill the schematic signs, icons and emoticons of the media with individual denotations, which can express anxiety or aggressive feelings hidden into these symbols. Identifying with movie characters or scenes often has a function to accomplish wishes. Similarly to role models, the identification with an idealised character may mean that the adolescent lives through the characteristic he longs for. The fictional characters of a film can be the tool of self-irony or self-taunting too, which can also refer to anxiety or aggressive feelings. In other cases pupils reveal very complex contents about selfknowledge through the scenes or characters of a film, which are difficult to get into shape in a verbal way. Finally, the frequent appearance of some famous trademarks in drawings could be an indication of matter of prestige and these emblems could be interpreted as a way of self-expression in peer groups.

Ultrasonic Low-Friction Containment Plate for Thermal and Ultrasonic Stir Weld Processes

NASA Technical Reports Server (NTRS)

Graff, Karl; Short, Matt

2013-01-01

The thermal stir welding (TSW) process is finding applications in fabrication of space vehicles. In this process, workpieces to be joined by TSW are drawn, by heavy forces, between "containment plates," past the TSW tool that then causes joining of the separate plates. It is believed that the TSW process would be significantly improved by reducing the draw force, and that this could be achieved by reducing the friction forces between the workpieces and containment plates. Based on use of high-power ultrasonics in metal forming processes, where friction reduction in drawing dies has been achieved, it is believed that ultrasonic vibrations of the containment plates could achieve similar friction reduction in the TSW process. By applying ultrasonic vibrations to the containment plates in a longitudinal vibration mode, as well as by mounting and holding the containment plates in a specific manner such as to permit the plates to acoustically float, friction between the metal parts and the containment plates is greatly reduced, and so is the drawing force. The concept was to bring in the ultrasonics from the sides of the plates, permitting the ultrasonic hardware to be placed to the side, away from the equipment that contains the thermal stir tooling and that applies clamping forces to the plates. Tests demonstrated that one of the major objectives of applying ultrasonics to the thermal stir system, that of reducing draw force friction, should be achievable on a scaled-up system.

Is Multitask Deep Learning Practical for Pharma?

PubMed

Ramsundar, Bharath; Liu, Bowen; Wu, Zhenqin; Verras, Andreas; Tudor, Matthew; Sheridan, Robert P; Pande, Vijay

2017-08-28

Multitask deep learning has emerged as a powerful tool for computational drug discovery. However, despite a number of preliminary studies, multitask deep networks have yet to be widely deployed in the pharmaceutical and biotech industries. This lack of acceptance stems from both software difficulties and lack of understanding of the robustness of multitask deep networks. Our work aims to resolve both of these barriers to adoption. We introduce a high-quality open-source implementation of multitask deep networks as part of the DeepChem open-source platform. Our implementation enables simple python scripts to construct, fit, and evaluate sophisticated deep models. We use our implementation to analyze the performance of multitask deep networks and related deep models on four collections of pharmaceutical data (three of which have not previously been analyzed in the literature). We split these data sets into train/valid/test using time and neighbor splits to test multitask deep learning performance under challenging conditions. Our results demonstrate that multitask deep networks are surprisingly robust and can offer strong improvement over random forests. Our analysis and open-source implementation in DeepChem provide an argument that multitask deep networks are ready for widespread use in commercial drug discovery.

Persistent negative illness perceptions despite long-term biochemical control of acromegaly: novel application of the drawing test.

PubMed

Tiemensma, Jitske; Pereira, Alberto M; Romijn, Johannes A; Broadbent, Elizabeth; Biermasz, Nienke R; Kaptein, Adrian A

2015-05-01

Patients with acromegaly have persistent complaints despite long-term biochemical control. Drawings can be used to assess patients' perceptions about their disease. We aimed to explore the utility of the drawing test and its relation to illness perceptions and quality of life (QoL) in patients after long-term remission of acromegaly. A cross-sectional study was conducted to evaluate the utility of the drawing test. A total of 50 patients after long-term remission (mean±s.e.m., 16±1.2 years) of acromegaly were included in this study. Patients completed the drawing test (two retrospective drawings of their body perception before acromegaly and during the active phase of acromegaly, and one drawing on the current condition after long-term remission), Illness Perception Questionnaire-Revised, Physical Symptom Checklist, EuroQoL-5D, and AcroQoL. Patients perceived a dramatic change in body size during the active state of the disease compared with the healthy state before the awareness of acromegaly. Patients reported that their body did not completely return to the original proportions after long-term remission. In addition, larger drawings indicated more negative consequences (P<0.05), a higher score on emotional representations (P<0.05), and more perceived symptoms that were attributed to acromegaly (P<0.01). Larger drawings also indicated more impaired QoL, especially disease-specific QoL (all P<0.05). There are strong correlations among the drawing test, illness perceptions, and QoL. The drawing test appears to be a novel and relatively easy tool to assess the perception of patients after long-term remission of acromegaly. The assessment of drawings may enable health care providers to appreciate the perceptions of patients with long-term remission of acromegaly, and enable discussion of symptoms and remission. © 2015 European Society of Endocrinology.

VirusDetect: An automated pipeline for efficient virus discovery using deep sequencing of small RNAs

USDA-ARS?s Scientific Manuscript database

Accurate detection of viruses in plants and animals is critical for agriculture production and human health. Deep sequencing and assembly of virus-derived siRNAs has proven to be a highly efficient approach for virus discovery. However, to date no computational tools specifically designed for both k...

Conflict Resolution and Children's Behaviour: Observing and Understanding Social and Cooperative Play in Early Years Educational Settings

ERIC Educational Resources Information Center

Broadhead, Pat

2009-01-01

This paper draws from continuing research into the growth of sociability and cooperation in young children. It began in the mid-1980s and has continued periodically in a range of early years educational settings across the 3-6 age range. The research has underpinned the development of an observational tool. This tool--the Social Play Continuum or…

In Search of Samoan Research Approaches to Education: Tofa'a'Anolasi and the Foucauldian Tool Box

ERIC Educational Resources Information Center

Galuvao, Akata Sisigafu'aapulematumua

2018-01-01

This article introduces Tofa'a'anolasi, a novel Samoan research framework created by drawing on the work of other Samoan and Pacific education researchers, in combination with adapting the 'Foucauldian tool box' to use for research carried out from a Samoan perspective. The article starts with an account and explanation of the process of…

Study of the influence of selected anisotropic parameter in the Barlat's model on the drawpiece shape

NASA Astrophysics Data System (ADS)

Kaldunski, Pawel; Kukielka, Leon; Patyk, Radoslaw; Kulakowska, Agnieszka; Bohdal, Lukasz; Chodor, Jaroslaw; Kukielka, Krzysztof

2018-05-01

In this paper, the numerical analysis and computer simulation of deep drawing process has been presented. The incremental model of the process in updated Lagrangian formulation with the regard of the geometrical and physical nonlinearity has been evaluated by variational and the finite element methods. The Frederic Barlat's model taking into consideration the anisotropy of materials in three main and six tangents directions has been used. The work out application in Ansys/Ls-Dyna program allows complex step by step analysis and prognoses: the shape, dimensions and state stress and strains of drawpiece. The paper presents the influence of selected anisotropic parameter in the Barlat's model on the drawpiece shape, which includes: height, sheet thickness and maximum drawing force. The important factors determining the proper formation of drawpiece and the ways of their determination have been described.

Optimizing Chemical Reactions with Deep Reinforcement Learning.

PubMed

Zhou, Zhenpeng; Li, Xiaocheng; Zare, Richard N

2017-12-27

Deep reinforcement learning was employed to optimize chemical reactions. Our model iteratively records the results of a chemical reaction and chooses new experimental conditions to improve the reaction outcome. This model outperformed a state-of-the-art blackbox optimization algorithm by using 71% fewer steps on both simulations and real reactions. Furthermore, we introduced an efficient exploration strategy by drawing the reaction conditions from certain probability distributions, which resulted in an improvement on regret from 0.062 to 0.039 compared with a deterministic policy. Combining the efficient exploration policy with accelerated microdroplet reactions, optimal reaction conditions were determined in 30 min for the four reactions considered, and a better understanding of the factors that control microdroplet reactions was reached. Moreover, our model showed a better performance after training on reactions with similar or even dissimilar underlying mechanisms, which demonstrates its learning ability.

Multi-component lightweight gearwheels with deep-drawn wheel body for automotive applications

NASA Astrophysics Data System (ADS)

Benkert, Tim; Hiller, Maria; Volk, Wolfram

2017-09-01

Multi-component gearwheels offer great lightweight opportunities for automotive applications. An assembly of a gear ring and a wheel body joined by press fit replaces the monolithic gearwheel. To save weight, the wheel body uses lightweight design. This lightweight design influences the assembled gearwheel’s mechanical properties like stiffness, weight and torque capacity. Further, the wheel body material influences the mentioned properties as well. In this paper, the effects of the lightweight wheel body manufactured by deep-drawing on the mechanical properties of the assembled gearwheel are investigated. Three different wheel body designs are examined regarding their stiffness and weight compared to a reference gearwheel. Using the best design, the influence of five materials with increasing yield strength on the maximum torque the gearwheel can transmit is studied. All research is done virtually using Abaqus 6.12-3.

The 'French exception': the right to continuous deep sedation at the end of life.

PubMed

Horn, Ruth

2018-03-01

In 2016, a law came into force in France granting terminally ill patients the right to continuous deep sedation (CDS) until death. This right was proposed as an alternative to euthanasia and presented as the 'French response' to problems at the end of life. The law draws a distinction between CDS and euthanasia and other forms of sympton control at the end of life. France is the first country in the world to legislate on CDS . This short report describes the particular context and underlying social values that led to this piece of legislation, and explores its meaning in the wider French context. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Light sleep versus slow wave sleep in memory consolidation: a question of global versus local processes?

PubMed

Genzel, Lisa; Kroes, Marijn C W; Dresler, Martin; Battaglia, Francesco P

2014-01-01

Sleep is strongly involved in memory consolidation, but its role remains unclear. 'Sleep replay', the active potentiation of relevant synaptic connections via reactivation of patterns of network activity that occurred during previous experience, has received considerable attention. Alternatively, sleep has been suggested to regulate synaptic weights homeostatically and nonspecifically, thereby improving the signal:noise ratio of memory traces. Here, we reconcile these theories by highlighting the distinction between light and deep nonrapid eye movement (NREM) sleep. Specifically, we draw on recent studies to suggest a link between light NREM and active potentiation, and between deep NREM and homeostatic regulation. This framework could serve as a key for interpreting the physiology of sleep stages and reconciling inconsistencies in terminology in this field. Copyright © 2013 Elsevier Ltd. All rights reserved.

Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming

NASA Astrophysics Data System (ADS)

Chen, Yi-Zhe; Liu, Wei; Yuan, Shi-Jian

2015-05-01

Normally, the strength and formability of aluminum alloys can be increased largely by severe plastic deformation and heat treatment. However, many plastic deformation processes are more suitable for making raw material, not for formed parts. In this article, an experimental study of the thermomechanical treatment by using the sheet hydroforming process was developed to improve both mechanical strength and formability for aluminum alloys in forming complex parts. The limiting drawing ratio, thickness, and strain distribution of complex parts formed by sheet hydroforming were investigated to study the formability and sheet-deformation behavior. Based on the optimal formed parts, the tensile strength, microhardness, grain structure, and strengthening precipitates were analyzed to identify the strengthening effect of thermomechanical treatment. The results show that in the solution state, the limiting drawing ratio of cylindrical parts could be increased for 10.9% compared with traditional deep drawing process. The peak values of tensile stress and microhardness of formed parts are 18.0% and 12.5% higher than that in T6 state. This investigation shows that the thermomechanical treatment by sheet hydroforming is a potential method for the products manufacturing of aluminum alloy with high strength and good formability.

Serious Learning with Science Comics: "Antarctic Log" as a Tool for Understanding Climate Research in AntarcticaScience comics open doors, providing multiple entry points for diverse learners. Karen Romano Young, award-winning author, presents "Antarctic Log", a comic about her spring 2018 Palmer Station tour, a tool for teaching and inspiration.

NASA Astrophysics Data System (ADS)

Young, K. R.

2017-12-01

Graphic nonfiction: what is it? Some call these books and articles science comics, but they're no joke: created through research and direct experience by artists invested in creating multiple entry points for new learners, comics can open doors for discovery as introduction, enrichment, or as a vital center point to teaching. Find out what educational pedagogists, scientists, and - yes! - students themselves think about reading, viewing, learning from, and creating science comics in the classroom. Karen Romano Young is the award-winning author of traditional and graphic fiction and nonfiction for children, including Doodlebug, the forthcoming Diving for Deep-Sea Dragons, and the Odyssey/Muse magazine comics feature Humanimal Doodles. In spring 2018 (Antarctic autumn) Young will work as part of a Bigelow Laboratory team studying the production of DMSP by phytoplankton, and the resulting cloud formation. This is invisible stuff, difficult for lay audiences to envision and comprehend. But the audience is already forming around "Antarctic Log," a science comic that tells the story of the science and the experience of doing climate research at Palmer Station as winter draws near. Science comics aren't just for enrichment. They're an invitation, providing multiple entry points for diverse learners. I have received unanticipated support from education groups (including NSTA and IRA), parenting groups, and special educators because these highly visual presentations of middle grade and middle school level material makes the stories and concepts accessible to atypical fiction- and science-reading audiences. As a result, I've learned a great deal about the underlying differences between my material and traditional, text-oriented materials in which visuals may be highly coordinated but are still ancillary. An article that might seem forbidding as text appears open to interpretation in my format, so that readers can pick where to begin reading and how to proceed through the story. This presentation is intended to inspire discussion of why visual text is effective and how to use it in formal and informal learning. It will draw on criticism of such works as well as case studies of ways they have been used with children.

Evaluating the Usability of a Professional Modeling Tool Repurposed for Middle School Learning

ERIC Educational Resources Information Center

Peters, Vanessa L.; Songer, Nancy Butler

2013-01-01

This paper reports the results of a three-stage usability test of a modeling tool designed to support learners' deep understanding of the impacts of climate change on ecosystems. The design process involved repurposing an existing modeling technology used by professional scientists into a learning tool specifically designed for middle school…

Leadership styles, emotion regulation, and burnout.

PubMed

Arnold, Kara A; Connelly, Catherine E; Walsh, Megan M; Martin Ginis, Kathleen A

2015-10-01

This study investigated the potential impact of leadership style on leaders' emotional regulation strategies and burnout. Drawing on the full-range model of leadership and Conservation of Resources (COR) theory, we tested whether transformational, contingent reward, management by exception-active and -passive, or laissez-faire leadership exert direct effects on leaders' reported use of surface acting, deep acting, and genuine emotion. In turn, we hypothesized and tested the indirect effect of leadership on burnout through surface acting. Three waves of data from 205 leaders were analyzed using OLS regression. Transformational leadership predicted deep acting and genuine emotion. Contingent reward predicted both surface and deep acting. Management by exception-active and -passive predicted surface acting, and laissez faire predicted genuine emotion. The indirect effects of management by exception-active and -passive on burnout through surface acting were not significant. Indirect effects of transformational leadership and laissez-faire on burnout through genuine emotion, however, were significant. This study provides empirical evidence for the hypothesized relationships between leadership style, emotion regulation, and burnout, and provides the basis for future research and theory building on this topic. (c) 2015 APA, all rights reserved).

Design Principles for Nickel/Hydrogen Cells and Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Manzo, Michelle A.; Gonzalez-Sanabria, Olga D.

1987-01-01

Individual-pressure-vessel (IPV) nickel/hydrogen cells and bipolar batteries developed for use as energy-storage subsystems for satelite applications. Design principles applied draw upon extensive background in separator technology, alkaline-fuel-cell technology and several alkaline-cell technology areas. Principals are rather straightforward applications of capillary-force formalisms, coupled with slowly developing data base resulting from careful post-test analyses. Based on preconceived assumptions relative to how devices work and how to be designed so they display longer cycle lives at deep discharge.

Metropolitan Washington Area Water Supply Study. Appendix I. Outlying Service Areas.

DTIC Science & Technology

1983-09-01

wells listed in Table 1-21. All are deep well turbine pump systems which draw their water supply from the Magothy Aquifer (200-300 feet). The water...When the sixth well is placed on line, the Department will have the ability to produce a maximum of 4.0 mpply from the Magothy Aquifer (200-300 feet...1-42 MAL. FICUR! 1-12 ORC91IZATIONAL STRUCTURE OF MAJOR PUBLIC WATER SUPPLY SYSTEMS CHARLES COUMITY Surface GroundwaterWae ataWater Magothy Ratanso

Yoga Therapy: Building a Holding Environment for Somatic and Psyche Change.

PubMed

McClure, Bud

2015-01-01

Drawing on ideas from D.W. Winnicott and the work of Quaker theologian Parker Palmer, this article discusses the concept of a holding environment, its refined understanding in the literature over the years, and how it can be optimally used in yoga therapy. The evidence shows that effectively establishing a holding environment can facilitate both somatic and deep structural change in a client, facilitating healing from primal wounding as well as the potential reconnection to the true self.

An introduction to deep learning on biological sequence data: examples and solutions.

PubMed

Jurtz, Vanessa Isabell; Johansen, Alexander Rosenberg; Nielsen, Morten; Almagro Armenteros, Jose Juan; Nielsen, Henrik; Sønderby, Casper Kaae; Winther, Ole; Sønderby, Søren Kaae

2017-11-15

Deep neural network architectures such as convolutional and long short-term memory networks have become increasingly popular as machine learning tools during the recent years. The availability of greater computational resources, more data, new algorithms for training deep models and easy to use libraries for implementation and training of neural networks are the drivers of this development. The use of deep learning has been especially successful in image recognition; and the development of tools, applications and code examples are in most cases centered within this field rather than within biology. Here, we aim to further the development of deep learning methods within biology by providing application examples and ready to apply and adapt code templates. Given such examples, we illustrate how architectures consisting of convolutional and long short-term memory neural networks can relatively easily be designed and trained to state-of-the-art performance on three biological sequence problems: prediction of subcellular localization, protein secondary structure and the binding of peptides to MHC Class II molecules. All implementations and datasets are available online to the scientific community at https://github.com/vanessajurtz/lasagne4bio. skaaesonderby@gmail.com. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 3: HARP Graphics Oriented (GO) input user's guide

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.; Rothmann, Elizabeth; Mittal, Nitin; Koppen, Sandra Howell

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems, and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical preprocessor Graphics Oriented (GO) program. GO is a graphical user interface for the HARP engine that enables the drawing of reliability/availability models on a monitor. A mouse is used to select fault tree gates or Markov graphical symbols from a menu for drawing.

Efficient RNA structure comparison algorithms.

PubMed

Arslan, Abdullah N; Anandan, Jithendar; Fry, Eric; Monschke, Keith; Ganneboina, Nitin; Bowerman, Jason

2017-12-01

Recently proposed relative addressing-based ([Formula: see text]) RNA secondary structure representation has important features by which an RNA structure database can be stored into a suffix array. A fast substructure search algorithm has been proposed based on binary search on this suffix array. Using this substructure search algorithm, we present a fast algorithm that finds the largest common substructure of given multiple RNA structures in [Formula: see text] format. The multiple RNA structure comparison problem is NP-hard in its general formulation. We introduced a new problem for comparing multiple RNA structures. This problem has more strict similarity definition and objective, and we propose an algorithm that solves this problem efficiently. We also develop another comparison algorithm that iteratively calls this algorithm to locate nonoverlapping large common substructures in compared RNAs. With the new resulting tools, we improved the RNASSAC website (linked from http://faculty.tamuc.edu/aarslan ). This website now also includes two drawing tools: one specialized for preparing RNA substructures that can be used as input by the search tool, and another one for automatically drawing the entire RNA structure from a given structure sequence.

Chemometric tool for identification of iron-gall inks by use of visible-near infrared fibre optic reflection spectroscopy.

PubMed

Gál, Lukáš; Čeppan, Michal; Reháková, Milena; Dvonka, Vladimír; Tarajčáková, Jarmila; Hanus, Jozef

2013-11-01

A method has been developed for identification of corrosive iron-gall inks in historical drawings and documents. The method is based on target-factor analysis of visible-near infrared fibre optic reflection spectra (VIS-NIR FORS). A set of reference spectra was obtained from model samples of laboratory-prepared inks covering a wide range of mixing ratios of basic ink components deposited on substrates and artificially aged. As criteria for correspondence of a studied spectrum with a reference spectrum, the apparent error in target (AET) and the empirical function SPOIL according to Malinowski were used. The capability of the proposed tool to distinguish corrosive iron-gall inks from bistre and sepia inks was evaluated by use of a set of control samples of bistre, sepia, and iron-gall inks. Examples are presented of analysis of historical drawings from the 15th and 16th centuries and written documents from the 19th century. The results of analysis based on the tool were confirmed by XRF analysis and colorimetric spot analysis.

Deep learning guided stroke management: a review of clinical applications.

PubMed

Feng, Rui; Badgeley, Marcus; Mocco, J; Oermann, Eric K

2018-04-01

Stroke is a leading cause of long-term disability, and outcome is directly related to timely intervention. Not all patients benefit from rapid intervention, however. Thus a significant amount of attention has been paid to using neuroimaging to assess potential benefit by identifying areas of ischemia that have not yet experienced cellular death. The perfusion-diffusion mismatch, is used as a simple metric for potential benefit with timely intervention, yet penumbral patterns provide an inaccurate predictor of clinical outcome. Machine learning research in the form of deep learning (artificial intelligence) techniques using deep neural networks (DNNs) excel at working with complex inputs. The key areas where deep learning may be imminently applied to stroke management are image segmentation, automated featurization (radiomics), and multimodal prognostication. The application of convolutional neural networks, the family of DNN architectures designed to work with images, to stroke imaging data is a perfect match between a mature deep learning technique and a data type that is naturally suited to benefit from deep learning's strengths. These powerful tools have opened up exciting opportunities for data-driven stroke management for acute intervention and for guiding prognosis. Deep learning techniques are useful for the speed and power of results they can deliver and will become an increasingly standard tool in the modern stroke specialist's arsenal for delivering personalized medicine to patients with ischemic stroke. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Toolkits and Libraries for Deep Learning.

PubMed

Erickson, Bradley J; Korfiatis, Panagiotis; Akkus, Zeynettin; Kline, Timothy; Philbrick, Kenneth

2017-08-01

Deep learning is an important new area of machine learning which encompasses a wide range of neural network architectures designed to complete various tasks. In the medical imaging domain, example tasks include organ segmentation, lesion detection, and tumor classification. The most popular network architecture for deep learning for images is the convolutional neural network (CNN). Whereas traditional machine learning requires determination and calculation of features from which the algorithm learns, deep learning approaches learn the important features as well as the proper weighting of those features to make predictions for new data. In this paper, we will describe some of the libraries and tools that are available to aid in the construction and efficient execution of deep learning as applied to medical images.

Clinical usefulness of the clock drawing test applying rasch analysis in predicting of cognitive impairment.

PubMed

Yoo, Doo Han; Lee, Jae Shin

2016-07-01

[Purpose] This study examined the clinical usefulness of the clock drawing test applying Rasch analysis for predicting the level of cognitive impairment. [Subjects and Methods] A total of 187 stroke patients with cognitive impairment were enrolled in this study. The 187 patients were evaluated by the clock drawing test developed through Rasch analysis along with the mini-mental state examination of cognitive evaluation tool. An analysis of the variance was performed to examine the significance of the mini-mental state examination and the clock drawing test according to the general characteristics of the subjects. Receiver operating characteristic analysis was performed to determine the cutoff point for cognitive impairment and to calculate the sensitivity and specificity values. [Results] The results of comparison of the clock drawing test with the mini-mental state showed significant differences in according to gender, age, education, and affected side. A total CDT of 10.5, which was selected as the cutoff point to identify cognitive impairement, showed a sensitivity, specificity, Youden index, positive predictive, and negative predicive values of 86.4%, 91.5%, 0.8, 95%, and 88.2%. [Conclusion] The clock drawing test is believed to be useful in assessments and interventions based on its excellent ability to identify cognitive disorders.

Meeting People "Where They Are": Case Managers Empower and Motivate Clients to Pursue Their Health Goals.

PubMed

Harkey, Jane; Sortedahl, Charlotte; Crook, Michelle M; Sminkey, Patrice V

The propose of this discussion is to explore the role of the case manager to empower and motivate clients, especially those who appear "stuck" or resistant to change. Drawing upon the experiences of case managers across many different practice settings, the article addresses how case managers can tap into the individual's underlying and sometimes deep-seated desires in order to foster buy-in for making even small steps toward achieving their health goals. The article also addresses how motivational interviewing can be an effective tool used by case managers to uncover blocks and barriers that prevent clients from making changes in their health or lifestyle habits. This discussion applies to case management practices and work settings across the full continuum of health care. The implication for case managers is deeper understanding of the importance of motivation to help clients make positive steps toward achieving their health goals. This understanding is especially important in advocating for clients who appear to be unmotivated or ambivalent, but who are actually "stuck" in engrained behaviors and habits because of a variety of factors, including past failures. Without judgment and by establishing rapport, case managers can tap into clients' desires, to help them make incremental progress toward their health goals.

Impact of a community-based intervention on serving and intake of vegetables among low-income, rural Appalachian families.

PubMed

Wenrich, Tionni R; Brown, J Lynne; Wilson, Robin Taylor; Lengerich, Eugene J

2012-01-01

To evaluate the effectiveness of a community-based intervention promoting the serving and eating of deep-orange, cruciferous, and dark-green leafy vegetables. Randomized, parallel-group, community-based intervention with a baseline/postintervention/3-month follow-up design. Low-income food preparers (n = 50) and their partners (n = 50) in rural Appalachia Pennsylvania. Experimental food preparers attended 8 weekly interactive lessons; control food preparers received 8 weekly mailings that included similar recipes and handouts. Target vegetable intake and frequency of serving by experimental and control treatment groups and by high and low meal diary scores, a measure of recipe acceptability. Linear mixed-model analysis with repeated measures. No significant differences resulted between the original experimental and control treatment groups. When grouped by high and low meal diary scores, more experimental families had high scores than in controls. High scores were associated with significant changes in frequency of serving and intake of the target vegetables. Meal diary use may foster food preparer negotiation with partners and children to become involved in vegetable dish evaluation. Tools to help the trained food preparer draw family members into recipe evaluation, such as the meal diary, are useful and needed. Copyright © 2012 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Study on super-long deep-hole drilling of titanium alloy.

PubMed

Liu, Zhanfeng; Liu, Yanshu; Han, Xiaolan; Zheng, Wencui

2018-01-01

In this study, the super-long deep-hole drilling of a titanium alloy was investigated. According to material properties of the titanium alloy, an experimental approach was designed to study three issues discovered during the drilling process: the hole-axis deflection, chip morphology, and tool wear. Based on the results of drilling experiments, crucial parameters for the super-long deep-hole drilling of titanium alloys were obtained, and the influences of these parameters on quality of the alloy's machining were also evaluated. Our results suggest that the developed drilling process is an effective method to overcome the challenge of super-long deep-hole drilling on difficult-to-cut materials.

The effect of some heat treatment parameters on the dimensional stability of AISI D2

NASA Astrophysics Data System (ADS)

Surberg, Cord Henrik; Stratton, Paul; Lingenhöle, Klaus

2008-01-01

The tool steel AISI D2 is usually processed by vacuum hardening followed by multiple tempering cycles. It has been suggested that a deep cold treatment in between the hardening and tempering processes could reduce processing time and improve the final properties and dimensional stability. Hardened blocks were then subjected to various combinations of single and multiple tempering steps (520 and 540 °C) and deep cold treatments (-90, -120 and -150 °C). The greatest dimensional stability was achieved by deep cold treatments at the lowest temperature used and was independent of the deep cold treatment time.

Government Draw Bentonite Beds: a newly identified stratigraphic marker in the Virgin Creek Member of the Pierre Shale, central South Dakota ( USA).

USGS Publications Warehouse

Nichols, T.C.; Chleborad, A.F.; Collins, D.S.

1987-01-01

A grouping of four bentonite beds, herein named the Government Draw Bentonite Beds, is identified as a stratigraphic marker within the Virgin Creek Member of the Pierre Shale. The beds are found west of Pierre, South Dakota, over an area of at least 130 mi2 (210 km2) where no other markers within the Virgin Creek Member have been identified. In this area, the Government Draw is a potential tool needed to determine the stratigraphic and structural relationships within the upper part of the Pierre Shale, heretofore little known. A better understanding of structural elements found in the Pierre Shale is needed to unravel the Late Cretaceous and younger geologic history of the area. -Authors

An investigation of the clinical use of the house-tree-person projective drawings in the psychological evaluation of child sexual abuse.

PubMed

Palmer, L; Farrar, A R; Valle, M; Ghahary, N; Panella, M; DeGraw, D

2000-05-01

Identification and evaluation of child sexual abuse is an integral task for clinicians. To aid these processes, it is necessary to have reliable and valid psychological measures. This is an investigation of the clinical validity and use of the House-Tree-Person (HTP) projective drawing, a widely used diagnostic tool, in the assessment of child sexual abuse. HTP drawings were collected archivally from a sample of sexually abused children (n = 47) and a nonabused comparison sample (n = 82). The two samples were grossly matched for gender, ethnicity, age, and socioeconomic status. The protocols were scored using a quantitative scoring system. The data were analyzed using a discriminant function analysis. Group membership could not be predicted based on a total HTP score.

Student conceptions about the DNA structure within a hierarchical organizational level: Improvement by experiment- and computer-based outreach learning.

PubMed

Langheinrich, Jessica; Bogner, Franz X

2015-01-01

As non-scientific conceptions interfere with learning processes, teachers need both, to know about them and to address them in their classrooms. For our study, based on 182 eleventh graders, we analyzed the level of conceptual understanding by implementing the "draw and write" technique during a computer-supported gene technology module. To give participants the hierarchical organizational level which they have to draw, was a specific feature of our study. We introduced two objective category systems for analyzing drawings and inscriptions. Our results indicated a long- as well as a short-term increase in the level of conceptual understanding and in the number of drawn elements and their grades concerning the DNA structure. Consequently, we regard the "draw and write" technique as a tool for a teacher to get to know students' alternative conceptions. Furthermore, our study points the modification potential of hands-on and computer-supported learning modules. © 2015 The International Union of Biochemistry and Molecular Biology.

P-Hint-Hunt: a deep parallelized whole genome DNA methylation detection tool.

PubMed

Peng, Shaoliang; Yang, Shunyun; Gao, Ming; Liao, Xiangke; Liu, Jie; Yang, Canqun; Wu, Chengkun; Yu, Wenqiang

2017-03-14

The increasing studies have been conducted using whole genome DNA methylation detection as one of the most important part of epigenetics research to find the significant relationships among DNA methylation and several typical diseases, such as cancers and diabetes. In many of those studies, mapping the bisulfite treated sequence to the whole genome has been the main method to study DNA cytosine methylation. However, today's relative tools almost suffer from inaccuracies and time-consuming problems. In our study, we designed a new DNA methylation prediction tool ("Hint-Hunt") to solve the problem. By having an optimal complex alignment computation and Smith-Waterman matrix dynamic programming, Hint-Hunt could analyze and predict the DNA methylation status. But when Hint-Hunt tried to predict DNA methylation status with large-scale dataset, there are still slow speed and low temporal-spatial efficiency problems. In order to solve the problems of Smith-Waterman dynamic programming and low temporal-spatial efficiency, we further design a deep parallelized whole genome DNA methylation detection tool ("P-Hint-Hunt") on Tianhe-2 (TH-2) supercomputer. To the best of our knowledge, P-Hint-Hunt is the first parallel DNA methylation detection tool with a high speed-up to process large-scale dataset, and could run both on CPU and Intel Xeon Phi coprocessors. Moreover, we deploy and evaluate Hint-Hunt and P-Hint-Hunt on TH-2 supercomputer in different scales. The experimental results illuminate our tools eliminate the deviation caused by bisulfite treatment in mapping procedure and the multi-level parallel program yields a 48 times speed-up with 64 threads. P-Hint-Hunt gain a deep acceleration on CPU and Intel Xeon Phi heterogeneous platform, which gives full play of the advantages of multi-cores (CPU) and many-cores (Phi).

Graphics Software Packages as Instructional Tools.

ERIC Educational Resources Information Center

Chiavaroli, Julius J.; Till, Ronald J.

1985-01-01

Graphics software can assist hearing-impaired students in visualizing and comparing ideas and can also demonstrate spatial relations and encourage creativity. Teachers and students can create and present data, diagrams, drawings, or charts quickly and accurately. (Author/CL)

Load-resistant coaxial transmission line

DOEpatents

Hall, David R.; Fox, Joe

2006-01-03

A transmission line for downhole tools that make up all or part of a tool string for drilling and production of oil, gas, and geothermal wells that can withstand the dynamic gravitational forces and other accelerations associated with downhole excavations. The transmission line has a metal tube, or outer conductor, that houses a coaxial wire inner conductor. A non-metallic dielectric material is interposed between the inner and outer conductors. The outer and inner conductors and the dielectric are sufficiently compressed together so that independent motion between them is abated. Compression of the components of the transmission line may be achieved by drawing the transmission through one or more dies in order to draw down the outer conductor onto the dielectric, or by expanding the inner conductor against the dielectric using a mandrel or hydraulic pressure. Non-metallic bead segments may be used in aid of the compression necessary to resist the dynamic forces and accelerations of drilling.

Robust Deep Semantics for Language Understanding

DTIC Science & Technology

focus on five areas: deep learning, textual inferential relations, relation and event extraction by distant supervision , semantic parsing and...ontology expansion, and coreference resolution. As time went by, the program focus converged towards emphasizing technologies for knowledge base...natural logic methods for text understanding, improved mention coreference algorithms, and the further development of multilingual tools in CoreNLP.

Collective Landmarks for Deep Time: A New Tool for Evolution Education

ERIC Educational Resources Information Center

Delgado, Cesar

2014-01-01

Evolution is a fundamental, organising concept in biology, yet there is widespread resistance to evolution among US students and there are rising creationist challenges in Europe. Resistance to evolution is linked to lack of understanding of the age of the Earth. An understanding of deep time is thus essential for effective biology education.…

GenomeGems: evaluation of genetic variability from deep sequencing data

PubMed Central

2012-01-01

Background Detection of disease-causing mutations using Deep Sequencing technologies possesses great challenges. In particular, organizing the great amount of sequences generated so that mutations, which might possibly be biologically relevant, are easily identified is a difficult task. Yet, for this assignment only limited automatic accessible tools exist. Findings We developed GenomeGems to gap this need by enabling the user to view and compare Single Nucleotide Polymorphisms (SNPs) from multiple datasets and to load the data onto the UCSC Genome Browser for an expanded and familiar visualization. As such, via automatic, clear and accessible presentation of processed Deep Sequencing data, our tool aims to facilitate ranking of genomic SNP calling. GenomeGems runs on a local Personal Computer (PC) and is freely available at http://www.tau.ac.il/~nshomron/GenomeGems. Conclusions GenomeGems enables researchers to identify potential disease-causing SNPs in an efficient manner. This enables rapid turnover of information and leads to further experimental SNP validation. The tool allows the user to compare and visualize SNPs from multiple experiments and to easily load SNP data onto the UCSC Genome browser for further detailed information. PMID:22748151

Developing a Tool to Evaluate Differences in Beliefs about Science Teaching and Learning among Freshman Science Student Teachers from Different Science Teaching Domains: A Case Study

ERIC Educational Resources Information Center

Markic, Silvija; Eilks, Ingo; Valanides, Nicos

2008-01-01

This paper presents a pilot case study on developing a qualitative tool to evaluate science student teachers' beliefs concerning science teaching and learning. The study is based on student teachers' drawings of themselves in a typical classroom situation and four open questions. Data was collected from 104 freshman science student teachers, and…

Comparison of deep and superficial abdominal muscle activity between experienced Pilates and resistance exercise instructors and controls during stabilization exercise.

PubMed

Moon, Ji-Hyun; Hong, Sang-Min; Kim, Chang-Won; Shin, Yun-A

2015-06-01

Pilates and resistance exercises are used for lumbar stabilization training. However, it is unclear which exercise is more effective for lumbar stabilization. In our study, we aimed to compare surface muscle activity and deep muscle thickness during relaxation and spinal stabilization exercise in experienced Pilates and resistance exercise instructors. This study is a retrospective case control study set in the Exercise Prescription Laboratory and Sports Medicine Center. The participants included Pilates instructors (mean years of experience, 3.20±1.76; n=10), resistance exercise instructors (mean years of experience, 2.53±0.63; n=10), and controls (n=10). The participants performed 4 different stabilization exercises: abdominal drawing-in maneuver, bridging, roll-up, and one-leg raise. During the stabilization exercises, surface muscle activity was measured with electromyography, whereas deep muscle thickness was measured by ultrasound imaging. During the 4 stabilization exercises, the thickness of the transverse abdominis (TrA) was significantly greater in the Pilates-trained group than the other 2 other groups. The internal oblique (IO) thickness was significantly greater in the Pilates- and resistance-trained group than the control group, during the 4 exercises. However, the surface muscle activities were similar between the groups. Both Pilates and resistance exercise instructors had greater activation of deep muscles, such as the TrA and IO, than the control subjects. Pilates and resistance exercise are both effective for increasing abdominal deep muscle thickness.

Comparison of deep and superficial abdominal muscle activity between experienced Pilates and resistance exercise instructors and controls during stabilization exercise

PubMed Central

Moon, Ji-Hyun; Hong, Sang-Min; Kim, Chang-Won; Shin, Yun-A

2015-01-01

Pilates and resistance exercises are used for lumbar stabilization training. However, it is unclear which exercise is more effective for lumbar stabilization. In our study, we aimed to compare surface muscle activity and deep muscle thickness during relaxation and spinal stabilization exercise in experienced Pilates and resistance exercise instructors. This study is a retrospective case control study set in the Exercise Prescription Laboratory and Sports Medicine Center. The participants included Pilates instructors (mean years of experience, 3.20±1.76; n=10), resistance exercise instructors (mean years of experience, 2.53±0.63; n=10), and controls (n=10). The participants performed 4 different stabilization exercises: abdominal drawing-in maneuver, bridging, roll-up, and one-leg raise. During the stabilization exercises, surface muscle activity was measured with electromyography, whereas deep muscle thickness was measured by ultrasound imaging. During the 4 stabilization exercises, the thickness of the transverse abdominis (TrA) was significantly greater in the Pilates-trained group than the other 2 other groups. The internal oblique (IO) thickness was significantly greater in the Pilates- and resistance-trained group than the control group, during the 4 exercises. However, the surface muscle activities were similar between the groups. Both Pilates and resistance exercise instructors had greater activation of deep muscles, such as the TrA and IO, than the control subjects. Pilates and resistance exercise are both effective for increasing abdominal deep muscle thickness. PMID:26171383

Validation of a Low-Thrust Mission Design Tool Using Operational Navigation Software

NASA Technical Reports Server (NTRS)

Englander, Jacob A.; Knittel, Jeremy M.; Williams, Ken; Stanbridge, Dale; Ellison, Donald H.

2017-01-01

Design of flight trajectories for missions employing solar electric propulsion requires a suitably high-fidelity design tool. In this work, the Evolutionary Mission Trajectory Generator (EMTG) is presented as a medium-high fidelity design tool that is suitable for mission proposals. EMTG is validated against the high-heritage deep-space navigation tool MIRAGE, demonstrating both the accuracy of EMTG's model and an operational mission design and navigation procedure using both tools. The validation is performed using a benchmark mission to the Jupiter Trojans.

Comparison of Hydrodynamic Load Predictions Between Engineering Models and Computational Fluid Dynamics for the OC4-DeepCwind Semi-Submersible: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benitz, M. A.; Schmidt, D. P.; Lackner, M. A.

Hydrodynamic loads on the platforms of floating offshore wind turbines are often predicted with computer-aided engineering tools that employ Morison's equation and/or potential-flow theory. This work compares results from one such tool, FAST, NREL's wind turbine computer-aided engineering tool, and the computational fluid dynamics package, OpenFOAM, for the OC4-DeepCwind semi-submersible analyzed in the International Energy Agency Wind Task 30 project. Load predictions from HydroDyn, the offshore hydrodynamics module of FAST, are compared with high-fidelity results from OpenFOAM. HydroDyn uses a combination of Morison's equations and potential flow to predict the hydrodynamic forces on the structure. The implications of the assumptionsmore » in HydroDyn are evaluated based on this code-to-code comparison.« less

Problem-solving tools for analyzing system problems. The affinity map and the relationship diagram.

PubMed

Lepley, C J

1998-12-01

The author describes how to use two management tools, an affinity map and a relationship diagram, to define and analyze aspects of a complex problem in a system. The affinity map identifies the key influencing elements of the problem, whereas the relationship diagram helps to identify the area that is the most important element of the issue. Managers can use the tools to draw a map of problem drivers, graphically display the drivers in a diagram, and use the diagram to develop a cause-and-effect relationship.

Stable architectures for deep neural networks

NASA Astrophysics Data System (ADS)

Haber, Eldad; Ruthotto, Lars

2018-01-01

Deep neural networks have become invaluable tools for supervised machine learning, e.g. classification of text or images. While often offering superior results over traditional techniques and successfully expressing complicated patterns in data, deep architectures are known to be challenging to design and train such that they generalize well to new data. Critical issues with deep architectures are numerical instabilities in derivative-based learning algorithms commonly called exploding or vanishing gradients. In this paper, we propose new forward propagation techniques inspired by systems of ordinary differential equations (ODE) that overcome this challenge and lead to well-posed learning problems for arbitrarily deep networks. The backbone of our approach is our interpretation of deep learning as a parameter estimation problem of nonlinear dynamical systems. Given this formulation, we analyze stability and well-posedness of deep learning and use this new understanding to develop new network architectures. We relate the exploding and vanishing gradient phenomenon to the stability of the discrete ODE and present several strategies for stabilizing deep learning for very deep networks. While our new architectures restrict the solution space, several numerical experiments show their competitiveness with state-of-the-art networks.

A Study Of Undergraduate Students' Alternative Conceptions Of Earth's Interior Using Drawing Tasks

NASA Astrophysics Data System (ADS)

McAllister, Meredith L.

2014-12-01

Learning fundamental geoscience topics such as plate tectonics, earthquakes, and volcanoes requires students to develop a deep understanding of the conceptual models geologists use when describing the structure and dynamics of Earth's interior. Despite the importance of these mental models underlying much of the undergraduate geoscience curriculum, surprisingly little research related to this complex idea exists in the discipline-based science education research literature. To better understand non-science-majoring undergraduates' conceptual models of Earth's interior, student-generated drawings and interviews were used to probe student understanding of the Earth. Ninety-two semi-structured interviews were conducted with non-science-major college students at the beginning of an entry-level geology course at a large Midwestern university. Students were asked to draw a picture of Earth's interior and provide think-aloud explanations of their drawings. The results reveal that students hold a wide range of alternative conceptions about Earth, with only a small fraction having scientifically accurate ideas. Students' understandings ranged from conceptualizing Earth's interior as consisting of horizontal layers of rock and dirt, to more sophisticated views with Earth's interior being composed of concentric layers with unique physical and chemical characteristics. Processes occurring within Earth, such as "convection," were rarely mentioned or explained. These results provide a first-steps basis from which to further explore college students' thinking and contribute to the growing body of knowledge on earth science teaching and geoscience education research.

Learner-generated drawing for phonological and orthographic dyslexic readers.

PubMed

Wang, Li-Chih; Yang, Hsien-Ming; Tasi, Hung-Ju; Chan, Shih-Yi

2013-01-01

This study presents an examination of learner-generated drawing for different reading comprehension subtypes of dyslexic students and control students. The participants were 22 phonological dyslexic students, 20 orthographic dyslexic students, 21 double-deficit dyslexic students, and 45 age-, gender-, and IQ-matched control students. The major evaluation tools included word recognition task, orthographic task, phonological awareness task, and scenery texts and questions. Comparisons of the four groups of students showed differences among phonological dyslexia, orthographic dyslexia, double-deficit dyslexia, and the chronological age control groups in pre- and posttest performance of scenery texts. Differences also existed in relevant questions and the effect of the learner-generated drawing method. The pretest performance showed problems in the dyslexic samples in reading the scenery texts and answering relevant questions. The posttest performance revealed certain differences among phonological dyslexia, orthographic dyslexia, double-deficit dyslexia, and the chronological age control group. Finally, all dyslexic groups obtained a great effect from using the learner-generated drawing, particularly orthographic dyslexia. These results suggest that the learner-generated drawing was also useful for dyslexic students, with the potential for use in the classroom for teaching text reading to dyslexic students. Copyright © 2012 Elsevier Ltd. All rights reserved.

Detection and Localization of Robotic Tools in Robot-Assisted Surgery Videos Using Deep Neural Networks for Region Proposal and Detection.

PubMed

Sarikaya, Duygu; Corso, Jason J; Guru, Khurshid A

2017-07-01

Video understanding of robot-assisted surgery (RAS) videos is an active research area. Modeling the gestures and skill level of surgeons presents an interesting problem. The insights drawn may be applied in effective skill acquisition, objective skill assessment, real-time feedback, and human-robot collaborative surgeries. We propose a solution to the tool detection and localization open problem in RAS video understanding, using a strictly computer vision approach and the recent advances of deep learning. We propose an architecture using multimodal convolutional neural networks for fast detection and localization of tools in RAS videos. To the best of our knowledge, this approach will be the first to incorporate deep neural networks for tool detection and localization in RAS videos. Our architecture applies a region proposal network (RPN) and a multimodal two stream convolutional network for object detection to jointly predict objectness and localization on a fusion of image and temporal motion cues. Our results with an average precision of 91% and a mean computation time of 0.1 s per test frame detection indicate that our study is superior to conventionally used methods for medical imaging while also emphasizing the benefits of using RPN for precision and efficiency. We also introduce a new data set, ATLAS Dione, for RAS video understanding. Our data set provides video data of ten surgeons from Roswell Park Cancer Institute, Buffalo, NY, USA, performing six different surgical tasks on the daVinci Surgical System (dVSS) with annotations of robotic tools per frame.

Application programs written by using customizing tools of a computer-aided design system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, X.; Huang, R.; Juricic, D.

1995-12-31

Customizing tools of Computer-Aided Design Systems have been developed to such a degree as to become equivalent to powerful higher-level programming languages that are especially suitable for graphics applications. Two examples of application programs written by using AutoCAD`s customizing tools are given in some detail to illustrate their power. One tool uses AutoLISP list-processing language to develop an application program that produces four views of a given solid model. The other uses AutoCAD Developmental System, based on program modules written in C, to produce an application program that renders a freehand sketch from a given CAD drawing.

"Both Answers Make Sense!"

ERIC Educational Resources Information Center

Lockwood, Elise

2014-01-01

Formulas, problem types, keywords, and tricky techniques can certainly be valuable tools for successful counters. However, they can easily become substitutes for critical thinking about counting problems and for deep consideration of the set of outcomes. Formulas and techniques should serve as tools for students as they think critically about…

The Fate and Impact of Internal Waves in Nearshore Ecosystems

NASA Astrophysics Data System (ADS)

Woodson, C. B.

2018-01-01

Internal waves are widespread features of global oceans that play critical roles in mixing and thermohaline circulation. Similarly to surface waves, internal waves can travel long distances, ultimately breaking along continental margins. These breaking waves can transport deep ocean water and associated constituents (nutrients, larvae, and acidic low-oxygen waters) onto the shelf and locally enhance turbulence and mixing, with important effects on nearshore ecosystems. We are only beginning to understand the role internal waves play in shaping nearshore ecosystems. Here, I review the physics of internal waves in shallow waters and identify two commonalities among internal waves in the nearshore: exposure to deep offshore waters and enhanced turbulence and mixing. I relate these phenomena to important ecosystem processes ranging from extreme events to fertilization success to draw general conclusions about the influence of internal waves on ecosystems and the effects of internal waves in a changing climate.

Volcano seismicity and ground deformation unveil the gravity-driven magma discharge dynamics of a volcanic eruption.

PubMed

Ripepe, Maurizio; Donne, Dario Delle; Genco, Riccardo; Maggio, Giuseppe; Pistolesi, Marco; Marchetti, Emanuele; Lacanna, Giorgio; Ulivieri, Giacomo; Poggi, Pasquale

2015-05-18

Effusive eruptions are explained as the mechanism by which volcanoes restore the equilibrium perturbed by magma rising in a chamber deep in the crust. Seismic, ground deformation and topographic measurements are compared with effusion rate during the 2007 Stromboli eruption, drawing an eruptive scenario that shifts our attention from the interior of the crust to the surface. The eruption is modelled as a gravity-driven drainage of magma stored in the volcanic edifice with a minor contribution of magma supplied at a steady rate from a deep reservoir. Here we show that the discharge rate can be predicted by the contraction of the volcano edifice and that the very-long-period seismicity migrates downwards, tracking the residual volume of magma in the shallow reservoir. Gravity-driven magma discharge dynamics explain the initially high discharge rates observed during eruptive crises and greatly influence our ability to predict the evolution of effusive eruptions.

Hope for health and health care.

PubMed

Stempsey, William E

2015-02-01

Virtually all activities of health care are motivated at some level by hope. Patients hope for a cure; for relief from pain; for a return home. Physicians hope to prevent illness in their patients; to make the correct diagnosis when illness presents itself; that their prescribed treatments will be effective. Researchers hope to learn more about the causes of illness; to discover new and more effective treatments; to understand how treatments work. Ultimately, all who work in health care hope to offer their patients hope. In this paper, I offer a brief analysis of hope, considering the definitions of Hobbes, Locke, Hume and Thomas Aquinas. I then differentiate shallow and deep hope and show how hope in health care can remain shallow. Next, I explore what a philosophy of deep hope in health care might look like, drawing important points from Ernst Bloch and Gabriel Marcel. Finally, I suggest some implications of this philosophy of hope for patients, physicians, and researchers.

Optimizing Chemical Reactions with Deep Reinforcement Learning

PubMed Central

2017-01-01

Deep reinforcement learning was employed to optimize chemical reactions. Our model iteratively records the results of a chemical reaction and chooses new experimental conditions to improve the reaction outcome. This model outperformed a state-of-the-art blackbox optimization algorithm by using 71% fewer steps on both simulations and real reactions. Furthermore, we introduced an efficient exploration strategy by drawing the reaction conditions from certain probability distributions, which resulted in an improvement on regret from 0.062 to 0.039 compared with a deterministic policy. Combining the efficient exploration policy with accelerated microdroplet reactions, optimal reaction conditions were determined in 30 min for the four reactions considered, and a better understanding of the factors that control microdroplet reactions was reached. Moreover, our model showed a better performance after training on reactions with similar or even dissimilar underlying mechanisms, which demonstrates its learning ability. PMID:29296675

The Fate and Impact of Internal Waves in Nearshore Ecosystems.

PubMed

Woodson, C B

2018-01-03

Internal waves are widespread features of global oceans that play critical roles in mixing and thermohaline circulation. Similarly to surface waves, internal waves can travel long distances, ultimately breaking along continental margins. These breaking waves can transport deep ocean water and associated constituents (nutrients, larvae, and acidic low-oxygen waters) onto the shelf and locally enhance turbulence and mixing, with important effects on nearshore ecosystems. We are only beginning to understand the role internal waves play in shaping nearshore ecosystems. Here, I review the physics of internal waves in shallow waters and identify two commonalities among internal waves in the nearshore: exposure to deep offshore waters and enhanced turbulence and mixing. I relate these phenomena to important ecosystem processes ranging from extreme events to fertilization success to draw general conclusions about the influence of internal waves on ecosystems and the effects of internal waves in a changing climate.

High power laser perforating tools and systems

DOEpatents

Zediker, Mark S; Rinzler, Charles C; Faircloth, Brian O; Koblick, Yeshaya; Moxley, Joel F

2014-04-22

ystems devices and methods for the transmission of 1 kW or more of laser energy deep into the earth and for the suppression of associated nonlinear phenomena. Systems, devices and methods for the laser perforation of a borehole in the earth. These systems can deliver high power laser energy down a deep borehole, while maintaining the high power to perforate such boreholes.

Automated analysis of high-content microscopy data with deep learning.

PubMed

Kraus, Oren Z; Grys, Ben T; Ba, Jimmy; Chong, Yolanda; Frey, Brendan J; Boone, Charles; Andrews, Brenda J

2017-04-18

Existing computational pipelines for quantitative analysis of high-content microscopy data rely on traditional machine learning approaches that fail to accurately classify more than a single dataset without substantial tuning and training, requiring extensive analysis. Here, we demonstrate that the application of deep learning to biological image data can overcome the pitfalls associated with conventional machine learning classifiers. Using a deep convolutional neural network (DeepLoc) to analyze yeast cell images, we show improved performance over traditional approaches in the automated classification of protein subcellular localization. We also demonstrate the ability of DeepLoc to classify highly divergent image sets, including images of pheromone-arrested cells with abnormal cellular morphology, as well as images generated in different genetic backgrounds and in different laboratories. We offer an open-source implementation that enables updating DeepLoc on new microscopy datasets. This study highlights deep learning as an important tool for the expedited analysis of high-content microscopy data. © 2017 The Authors. Published under the terms of the CC BY 4.0 license.

Visualization of the Invisible, Explanation of the Unknown, Ruggedization of the Unstable: Sensitivity Analysis, Virtual Tryout and Robust Design through Systematic Stochastic Simulation

NASA Astrophysics Data System (ADS)

Zwickl, Titus; Carleer, Bart; Kubli, Waldemar

2005-08-01

In the past decade, sheet metal forming simulation became a well established tool to predict the formability of parts. In the automotive industry, this has enabled significant reduction in the cost and time for vehicle design and development, and has helped to improve the quality and performance of vehicle parts. However, production stoppages for troubleshooting and unplanned die maintenance, as well as production quality fluctuations continue to plague manufacturing cost and time. The focus therefore has shifted in recent times beyond mere feasibility to robustness of the product and process being engineered. Ensuring robustness is the next big challenge for the virtual tryout / simulation technology. We introduce new methods, based on systematic stochastic simulations, to visualize the behavior of the part during the whole forming process — in simulation as well as in production. Sensitivity analysis explains the response of the part to changes in influencing parameters. Virtual tryout allows quick exploration of changed designs and conditions. Robust design and manufacturing guarantees quality and process capability for the production process. While conventional simulations helped to reduce development time and cost by ensuring feasible processes, robustness engineering tools have the potential for far greater cost and time savings. Through examples we illustrate how expected and unexpected behavior of deep drawing parts may be tracked down, identified and assigned to the influential parameters. With this knowledge, defects can be eliminated or springback can be compensated e.g.; the response of the part to uncontrollable noise can be predicted and minimized. The newly introduced methods enable more reliable and predictable stamping processes in general.

Finite element simulation of thickness changes in laminate during thermoforming

NASA Astrophysics Data System (ADS)

White, K. D.; Sherwood, J. A.

2017-10-01

This paper discusses a numerical investigation of thickness changes of Dyneema HB80, a cross-ply thermoplastic lamina, during a helmet thermoforming process. The main mode of deformation during the preform phase of manufacture is in-plane shearing of the fabric. A laminate undergoes varying degrees of shear to conform to the geometric variations over the surface of the preform shape. Decreases in areal coverage that occur with increases in the local shear angle will lead to a resulting increase in local thickness. During the consolidation phase, multiple preform layers are compressed in a set of matched tools, and the compounding of the thickness variations can adversely affect the uniformity of pressure distribution between matched die tooling. Pressure variations over the surface of the part can lead to incomplete consolidation of the ply stack, as well as weakened, resin-rich areas. Because wrinkling of the composite reinforcement, incomplete consolidation and resin-rich areas can result in a compromised structural performance, it is important that the manufacturing process be well understood so it can be designed to mitigate formation of such defects. In the current work, the material properties derived from shear, bending and tensile tests are implemented in a finite element model of the cross-ply lamina. The finite element model uses a hybrid discrete mesoscopic approach, and deep-draw forming of the material is simulated to investigate its formability to a hemispherical geometry. Thickening of the lamina resulting from shear deformation is investigated and incorporated into models single-layer preform simulations. The simulation results are used to inform the design of multiple-layer preforms to mitigate the development of thin regions and out-of-plane waves to ensure complete, uniform consolidation.

VisIt: An End-User Tool for Visualizing and Analyzing Very Large Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Childs, Hank; Brugger, Eric; Whitlock, Brad

2012-11-01

VisIt is a popular open source tool for visualizing and analyzing big data. It owes its success to its foci of increasing data understanding, large data support, and providing a robust and usable product, as well as its underlying design that fits today's supercomputing landscape. This report, which draws heavily from an earlier publication at the SciDAC Conference in 2011 describes the VisIt project and its accomplishments.

HullBUG Technology Development for Underwater Hull Cleaning

DTIC Science & Technology

2014-01-15

Grooming Tool would be generated. These drawings would be vended out to approved vendors for quoting. Quotes would be obtained for different levels...determined, parts would be vended out and manufactured. These parts would then be assembled at SRC. A test program would then follow to fully...identified all machined parts as well as all purchased hardware Top Assembly Based on total cost, a decision was made to make 1 grooming tool and 1

Physician-reported practices on continuous deep sedation until death: A descriptive and comparative study.

PubMed

Papavasiliou, Evangelia Evie; Chambaere, Kenneth; Deliens, Luc; Brearley, Sarah; Payne, Sheila; Rietjens, Judith; Vander Stichele, Robert; Van den Block, Lieve

2014-06-01

Research on continuous deep sedation until death has focused on estimating prevalence and describing clinical practice across care settings. However, evidence on sedation practices by physician specialty is scarce. To compare and contrast physician-reported practices on continuous deep sedation until death between general practitioners and medical specialists. A secondary analysis drawing upon data from a large-scale, population-based, retrospective survey among physicians in Flanders, Belgium in 2007. Symptom prevalence and characteristics of sedation (drugs used, artificial nutrition and hydration administered, intentions, and decision-making) were measured. Response rate was 58.4%. The frequency of continuous deep sedation until death among all deaths was 11.3% for general practitioners and 18.4% for medical specialists. General practitioners reported significantly higher rates of severity and mean intensity of pain, delirium, dyspnea, and nausea in the last 24 h of life for sedated patients and a higher number of severe symptoms than medical specialists. No differences were found between groups in the drugs used, except in propofol, reported only by medical specialists (in 15.8% of all cases). Artificial nutrition and hydration was withheld or withdrawn in 97.2% of general practitioner and 36.2% of medical specialist cases. Explicit life-shortening intentions were reported by both groups (for 3%-4% of all cases). Continuous deep sedation until death was initiated without consent or request of either the patient or the family in 27.9% (medical specialists) and 4.7% (general practitioners) of the cases reported. Considerable variation, often largely deviating from professional guidelines, was observed in physician-reported performance and decision-making, highlighting the importance of providing clearer guidance on the specific needs of the context in which continuous deep sedation until death is to be performed. © The Author(s) 2014.

The relationship between the deep-level structure in crust and brewing of strong earthquakes in Xingtai area

NASA Astrophysics Data System (ADS)

Xiao, Lan-Xi; Zhu, Yuan-Qing; Zhang, Shao-Quan; Liu, Xu; Guo, Yu

1999-11-01

In this paper, crust medium is treated as Maxwell medium, and crust model includes hard inclusion, soft inclusion, deep-level fault. The stress concentration and its evolution with time are obtained by using three-dimensional finite element method and differential method. The conclusions are draw as follows: (1) The average stress concentration and maximum shear stress concentration caused by non-heterogeneous of crust are very high in hard inclusion and around the deep fault. With the time passing by, the concentration of average stress in the model gradually trends to uniform. At the same time, the concentration of maximum shear stress in hard inclusion increases gradually. This character is favorable to transfer shear strain energy from soft inclusion to hard inclusion. (2) When the upper mantle beneath the inclusion upheave at a certain velocity of 1 cm/a, the changes of average stress concentration with time become complex, and the boundary of the hard and soft inclusion become unconspicuous, but the maximum shear stress concentration increases much more in the hard inclusion with time at a higher velocity. This feature make for transformation of energy from the soft inclusion to the hard inclusion. (3) The changes of average stress concentration and maximum shear stress concentration with time around the deep-level fault result in further accumulation of maximum shear stress concentration and finally cause the deep-level fault instable and accelerated creep along fault direction. (4) The changes of vertical displacement on the surface of the model, which is caused by the accelerated creep of the deep-level fault, is similar to that of the observation data before Xingtai strong earthquake.

JaxoDraw: A graphical user interface for drawing Feynman diagrams

NASA Astrophysics Data System (ADS)

Binosi, D.; Theußl, L.

2004-08-01

JaxoDraw is a Feynman graph plotting tool written in Java. It has a complete graphical user interface that allows all actions to be carried out via mouse click-and-drag operations in a WYSIWYG fashion. Graphs may be exported to postscript/EPS format and can be saved in XML files to be used for later sessions. One of JaxoDraw's main features is the possibility to create ? code that may be used to generate graphics output, thus combining the powers of ? with those of a modern day drawing program. With JaxoDraw it becomes possible to draw even complicated Feynman diagrams with just a few mouse clicks, without the knowledge of any programming language. Program summaryTitle of program: JaxoDraw Catalogue identifier: ADUA Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar gzip file Operating system: Any Java-enabled platform, tested on Linux, Windows ME, XP, Mac OS X Programming language used: Java License: GPL Nature of problem: Existing methods for drawing Feynman diagrams usually require some 'hard-coding' in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Method of solution: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Number of bytes in distributed program, including test data: 2 117 863 Number of lines in distributed program, including test data: 60 000 Restrictions: Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Typical running time: As an interactive program, the running time depends on the complexity of the diagram to be drawn.

Probing stereotypes through students' drawings of scientists

NASA Astrophysics Data System (ADS)

Rahm, Jrène; Charbonneau, Paul

1997-08-01

The Draw-A-Scientist Test is an assessment tool devised to explore and measure children's stereotypical views of scientists. We administered this test to a group of 49 undergraduate and postgraduate students enrolled in a teacher certification program. While this was originally intended as a purely pedagogical exercise, we were struck by the degree to which the drawings so produced resembled, in stereotypical content, those usually produced by children. This suggests that stereotypes of science and scientists formed during childhood, presumably via the influence of the media, remain largely unaffected by the subsequent passage through high school and college, despite the fact that numerous real-life figures of science teachers and scientists are presumably encountered throughout those formative years. We argue that this state of affairs has subtle and far reaching consequences, and is worthy of our collective attention.

Incorporating travel-time reliability into the congestion management process : a primer.

DOT National Transportation Integrated Search

2015-02-01

This primer explains the value of incorporating travel-time reliability into the Congestion Management Process (CMP) : and identifies the most current tools available to assist with this effort. It draws from applied research and best practices : fro...

A primer on safety performance measures for the transportation planning process

DOT National Transportation Integrated Search

2009-09-01

This Primer is a tool to help State and local practitioners, transportation planners, and decision-makers identify, select, and use safety performance measures as a part of the transportation planning process. The Primer draws from current literature...

The Entrepreneurial Mind.

ERIC Educational Resources Information Center

Timmons, Jeffry A.

Focusing on the knowledge and tools necessary for starting new entrepreneurial ventures, this book draws on information from the venture capital industry to describe the characteristics of entrepreneurs and entrepreneurial managers and includes self-assessment and management competency inventories. Following an introduction describing the elements…

Polygon Pictures in QuarkXPress.

ERIC Educational Resources Information Center

Osterer, Irv

1999-01-01

Describes an activity where students draw and fill simple and complex shapes by utilizing the polygon tool in QuarkXPress to create graphics. Explains that this activity enables students to learn how to use a variety of functions in the QuarkXPress program. (CMK)

Modeling light

NASA Astrophysics Data System (ADS)

Dawson, P.; Gage, J.; Takatsuka, M.; Goyette, S.

2009-02-01

To compete with other digital images, holograms must go beyond the current range of source-image types, such as sequences of photographs, laser scans, and 3D computer graphics (CG) scenes made with software designed for other applications. This project develops a set of innovative techniques for creating 3D digital content specifically for digital holograms, with virtual tools which enable the direct hand-crafting of subjects, mark by mark, analogous to Michelangelo's practice in drawing, painting and sculpture. The haptic device, the Phantom Premium 1.5 is used to draw against three-dimensional laser- scan templates of Michelangelo's sculpture placed within the holographic viewing volume.

Analyzing prospective teachers' images of scientists using positive, negative and stereotypical images of scientists

NASA Astrophysics Data System (ADS)

Subramaniam, Karthigeyan; Esprívalo Harrell, Pamela; Wojnowski, David

2013-04-01

Background and purpose : This study details the use of a conceptual framework to analyze prospective teachers' images of scientists to reveal their context-specific conceptions of scientists. The conceptual framework consists of context-specific conceptions related to positive, stereotypical and negative images of scientists as detailed in the literature on the images, role and work of scientists. Sample, design and method : One hundred and ninety-six drawings of scientists, generated by prospective teachers, were analyzed using the Draw-A-Scientist-Test Checklist (DAST-C), a binary linear regression and the conceptual framework. Results : The results of the binary linear regression analysis revealed a statistically significant difference for two DAST-C elements: ethnicity differences with regard to drawing a scientist who was Caucasian and gender differences for indications of danger. Analysis using the conceptual framework helped to categorize the same drawings into positive, stereotypical, negative and composite images of a scientist. Conclusions : The conceptual framework revealed that drawings were focused on the physical appearance of the scientist, and to a lesser extent on the equipment, location and science-related practices that provided the context of a scientist's role and work. Implications for teacher educators include the need to understand that there is a need to provide tools, like the conceptual framework used in this study, to help prospective teachers to confront and engage with their multidimensional perspectives of scientists in light of the current trends on perceiving and valuing scientists. In addition, teacher educators need to use the conceptual framework, which yields qualitative perspectives about drawings, together with the DAST-C, which yields quantitative measure for drawings, to help prospective teachers to gain a holistic outlook on their drawings of scientists.

Screening for cognitive dysfunction in Huntington's disease with the clock drawing test.

PubMed

Terwindt, Paul W; Hubers, Anna A M; Giltay, Erik J; van der Mast, Rose C; van Duijn, Erik

2016-09-01

The aim of the study is to investigate the performance of the clock drawing test as a screening tool for cognitive impairment in Huntington's disease (HD) mutation carriers. The performance of the clock drawing test was assessed in 65 mutation carriers using the Shulman and the Freund scoring systems. The mini-mental state examination, the Symbol Digit Modalities Test, the Verbal Fluency Test, and the Stroop tests were used as comparisons for the evaluation of cognitive functioning. Correlations of the clock drawing test with various cognitive tests (convergent validity), neuropsychiatric characteristics (divergent validity) and clinical characteristics were analysed using the Spearman's rank correlation coefficient. Receiver-operator characteristic analyses were performed for the clock drawing test against both the mini-mental state examination and against a composite variable for executive cognitive functioning to assess optimal cut-off scores. Inter-rater reliability was high for both the Shulman and Freund scoring systems (ICC = 0.95 and ICC = 0.90 respectively). The clock drawing tests showed moderate to high correlations with the composite variable for executive cognitive functioning (mean ρ = 0.75) and weaker correlations with the mini-mental state examination (mean ρ = 0.62). Mean sensitivity of the clock drawing tests was 0.82 and mean specificity was 0.79, whereas the mean positive predictive value was 0.66 and the mean negative predictive value was 0.87. The clock drawing test is a suitable screening instrument for cognitive dysfunction in HD, because it was shown to be accurate, particularly so with respect to executive cognitive functioning, and is easy and quick to use. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Using FMRI brain activation to identify cognitive states associated with perception of tools and dwellings.

PubMed

Shinkareva, Svetlana V; Mason, Robert A; Malave, Vicente L; Wang, Wei; Mitchell, Tom M; Just, Marcel Adam

2008-01-02

Previous studies have succeeded in identifying the cognitive state corresponding to the perception of a set of depicted categories, such as tools, by analyzing the accompanying pattern of brain activity, measured with fMRI. The current research focused on identifying the cognitive state associated with a 4s viewing of an individual line drawing (1 of 10 familiar objects, 5 tools and 5 dwellings, such as a hammer or a castle). Here we demonstrate the ability to reliably (1) identify which of the 10 drawings a participant was viewing, based on that participant's characteristic whole-brain neural activation patterns, excluding visual areas; (2) identify the category of the object with even higher accuracy, based on that participant's activation; and (3) identify, for the first time, both individual objects and the category of the object the participant was viewing, based only on other participants' activation patterns. The voxels important for category identification were located similarly across participants, and distributed throughout the cortex, focused in ventral temporal perceptual areas but also including more frontal association areas (and somewhat left-lateralized). These findings indicate the presence of stable, distributed, communal, and identifiable neural states corresponding to object concepts.

Are all "research fields" equal? Rethinking practice for the use of data from crowdsourcing market places.

PubMed

Gleibs, Ilka H

2017-08-01

New technologies like large-scale social media sites (e.g., Facebook and Twitter) and crowdsourcing services (e.g., Amazon Mechanical Turk, Crowdflower, Clickworker) are impacting social science research and providing many new and interesting avenues for research. The use of these new technologies for research has not been without challenges, and a recently published psychological study on Facebook has led to a widespread discussion of the ethics of conducting large-scale experiments online. Surprisingly little has been said about the ethics of conducting research using commercial crowdsourcing marketplaces. In this article, I focus on the question of which ethical questions are raised by data collection with crowdsourcing tools. I briefly draw on the implications of Internet research more generally, and then focus on the specific challenges that research with crowdsourcing tools faces. I identify fair pay and the related issue of respect for autonomy, as well as problems with the power dynamic between researcher and participant, which has implications for withdrawal without prejudice, as the major ethical challenges of crowdsourced data. Furthermore, I wish to draw attention to how we can develop a "best practice" for researchers using crowdsourcing tools.

Environmental philosophy: from theory to practice.

PubMed

Sarkar, Sahotra

2014-03-01

Environmental philosophy is a hybrid discipline drawing extensively from epistemology, ethics, and philosophy of science and analyzing disciplines such as conservation biology, restoration ecology, sustainability studies, and political ecology. The book being discussed both provides an overview of environmental philosophy and develops an anthropocentric framework for it. That framework treats natural values as deep cultural values. Tradeoffs between natural values are analyzed using decision theory to the extent possible, leaving many interesting question for philosophical deliberation. This framework is supposed to be applicable in practical contexts. Copyright © 2013 Elsevier Ltd. All rights reserved.

Advances in the application of holography for NDE

NASA Astrophysics Data System (ADS)

Sciammarella, C. A.

1985-01-01

The basic methodology of holographic interferometry in nondestructive testing (NDT) applications are described. Applications to crack detection in ceramic materials, including a crack 50 microns deep in a turbine blade, are discussed in detail. The theoretical principles of holographic interferometry are explained, and a general description of a holographic interferometric recording system is given. A nondestructive interferometric technique for measuring the gradual erosion of calcareous stones exposed to acid rain is also presented. Detailed line drawings illustrating the hologram recording and interferometric fringe pattern analysis elements in an interferometric holographic NDT device are provided.

Corporal diagnostic work and diagnostic spaces: clinicians' use of space and bodies during diagnosis.

PubMed

Gardner, John; Williams, Clare

2015-06-01

An emerging body of literature in sociology has demonstrated that diagnosis is a useful focal point for understanding the social dimensions of health and illness. This article contributes to this work by drawing attention to the relationship between diagnostic spaces and the way in which clinicians use their own bodies during the diagnostic process. As a case study, we draw upon fieldwork conducted with a multidisciplinary clinical team providing deep brain stimulation (DBS) to treat children with a movement disorder called dystonia. Interviews were conducted with team members and diagnostic examinations were observed. We illustrate that clinicians use communicative body work and verbal communication to transform a material terrain into diagnostic space, and we illustrate how this diagnostic space configures forms of embodied 'sensing-and-acting' within. We argue that a 'diagnosis' can be conceptualised as emerging from an interaction in which space, the clinician-body, and the patient-body (or body-part) mutually configure one another. By conceptualising diagnosis in this way, this article draws attention to the corporal bases of diagnostic power and counters Cartesian-like accounts of clinical work in which the patient-body is objectified by a disembodied medical discourse. © 2015 The Authors. Sociology of Health & Illness © 2015 Foundation for the Sociology of Health & Illness.

A Deep Space Orbit Determination Software: Overview and Event Prediction Capability

NASA Astrophysics Data System (ADS)

Kim, Youngkwang; Park, Sang-Young; Lee, Eunji; Kim, Minsik

2017-06-01

This paper presents an overview of deep space orbit determination software (DSODS), as well as validation and verification results on its event prediction capabilities. DSODS was developed in the MATLAB object-oriented programming environment to support the Korea Pathfinder Lunar Orbiter (KPLO) mission. DSODS has three major capabilities: celestial event prediction for spacecraft, orbit determination with deep space network (DSN) tracking data, and DSN tracking data simulation. To achieve its functionality requirements, DSODS consists of four modules: orbit propagation (OP), event prediction (EP), data simulation (DS), and orbit determination (OD) modules. This paper explains the highest-level data flows between modules in event prediction, orbit determination, and tracking data simulation processes. Furthermore, to address the event prediction capability of DSODS, this paper introduces OP and EP modules. The role of the OP module is to handle time and coordinate system conversions, to propagate spacecraft trajectories, and to handle the ephemerides of spacecraft and celestial bodies. Currently, the OP module utilizes the General Mission Analysis Tool (GMAT) as a third-party software component for highfidelity deep space propagation, as well as time and coordinate system conversions. The role of the EP module is to predict celestial events, including eclipses, and ground station visibilities, and this paper presents the functionality requirements of the EP module. The validation and verification results show that, for most cases, event prediction errors were less than 10 millisec when compared with flight proven mission analysis tools such as GMAT and Systems Tool Kit (STK). Thus, we conclude that DSODS is capable of predicting events for the KPLO in real mission applications.

Assessment of deep dynamic mechanical sensitivity in individuals with tension-type headache: The dynamic pressure algometry.

PubMed

Palacios-Ceña, M; Wang, K; Castaldo, M; Guerrero-Peral, Á; Caminero, A B; Fernández-de-Las-Peñas, C; Arendt-Nielsen, L

2017-09-01

To explore the validity of dynamic pressure algometry for evaluating deep dynamic mechanical sensitivity by assessing its association with headache features and widespread pressure sensitivity in tension-type headache (TTH). One hundred and eighty-eight subjects with TTH (70% women) participated. Deep dynamic sensitivity was assessed with a dynamic pressure algometry set (Aalborg University, Denmark © ) consisting of 11 different rollers including fixed levels from 500 g to 5300 g. Each roller was moved at a speed of 0.5 cm/s over a 60-mm horizontal line covering the temporalis muscle. Dynamic pain threshold (DPT-level of the first painful roller) was determined and pain intensity during DPT was rated on a numerical pain rate scale (NPRS, 0-10). Headache clinical features were collected on a headache diary. As gold standard, static pressure pain thresholds (PPT) were assessed over temporalis, C5/C6 joint, second metacarpal, and tibialis anterior muscle. Side-to-side consistency between DPT (r = 0.843, p < 0.001) and pain evoked (r = 0.712; p < 0.001) by dynamic algometer was observed. DPT was moderately associated with widespread PPTs (0.526 > r > 0.656, all p < 0.001). Furthermore, pain during DPT was negatively associated with widespread PPTs (-0.370 < r < -0.162, all p < 0.05). Dynamic pressure algometry was a valid tool for assessing deep dynamic mechanical sensitivity in TTH. DPT was associated with widespread pressure sensitivity independently of the frequency of headaches supporting that deep dynamic pressure sensitivity within the trigeminal area is consistent with widespread pressure sensitivity. Assessing deep static and dynamic somatic tissue pain sensitivity may provide new opportunities for differentiated diagnostics and possibly a new tool for assessing treatment effects. The current study found that dynamic pressure algometry in the temporalis muscle was associated with widespread pressure pain sensitivity in individuals with tension-type headache. The association was independent of the frequency of headaches. Assessing deep static and dynamic somatic tissue pain sensitivity may provide new opportunities for differentiated diagnostics and possibly a tool for assessing treatment effects. © 2017 European Pain Federation - EFIC®.

DeepPicker: A deep learning approach for fully automated particle picking in cryo-EM.

PubMed

Wang, Feng; Gong, Huichao; Liu, Gaochao; Li, Meijing; Yan, Chuangye; Xia, Tian; Li, Xueming; Zeng, Jianyang

2016-09-01

Particle picking is a time-consuming step in single-particle analysis and often requires significant interventions from users, which has become a bottleneck for future automated electron cryo-microscopy (cryo-EM). Here we report a deep learning framework, called DeepPicker, to address this problem and fill the current gaps toward a fully automated cryo-EM pipeline. DeepPicker employs a novel cross-molecule training strategy to capture common features of particles from previously-analyzed micrographs, and thus does not require any human intervention during particle picking. Tests on the recently-published cryo-EM data of three complexes have demonstrated that our deep learning based scheme can successfully accomplish the human-level particle picking process and identify a sufficient number of particles that are comparable to those picked manually by human experts. These results indicate that DeepPicker can provide a practically useful tool to significantly reduce the time and manual effort spent in single-particle analysis and thus greatly facilitate high-resolution cryo-EM structure determination. DeepPicker is released as an open-source program, which can be downloaded from https://github.com/nejyeah/DeepPicker-python. Copyright © 2016 Elsevier Inc. All rights reserved.

Estimated smoldering probability: a new tool for predicting ground fire in the organic soils on the North Carolina Coastal Plain

Treesearch

James Reardon; Gary Curcio

2011-01-01

In the Southeastern United States, fires in pocosin wetlands and other similar vegetation communities with deep organic soils are a serious concern to fire managers. Highly flammable shrubs, such as gallberry and fetterbush, and small evergreen trees, such as red and loblolly bay, create the potential for extreme surface fire behavior. Moreover, deep organic soils...

Jazz Up Your Curriculum

ERIC Educational Resources Information Center

Lim, Janine

2010-01-01

In this article, the author describes the Jazz Workshop, a unique blend of collaboration and constructivist learning using videoconferencing and Web 2.0 tools. Each summer it draws about 400 participants--mostly teachers, technology facilitators, teacher librarians, and videoconferencing coordinators--who convene in 20 locations across three…

Diagnosis, Dogmatism, and Rationality.

ERIC Educational Resources Information Center

Rabinowitz, Jonathan; Efron, Noah J.

1997-01-01

Presents findings suggesting that misdiagnoses frequently stem from flaws in human information processing, particularly in collecting and using information. Claims that improved diagnostic tools will not remedy the problem. Drawing on the work of Karl Popper and Robin Collingwood, proposes operational principles to ensure a rational diagnostic…

Young Children's Playfully Complex Communication: Distributed Imagination

ERIC Educational Resources Information Center

Alcock, Sophie

2010-01-01

This paper draws on research exploring young children's playful and humorous communication. It explores how playful activity mediates and connects children in complex activity systems where imagination, cognition, and consciousness become distributed across individuals. Children's playfulness is mediated and distributed via artefacts (tools, signs…

Service Oriented Architecture for Coast Guard Command and Control

DTIC Science & Technology

2007-03-01

Operations BPEL4WS The Business Process Execution Language for Web Services BPMN Business Process Modeling Notation CASP Computer Aided Search Planning...Business Process Modeling Notation ( BPMN ) provides a standardized graphical notation for drawing business processes in a workflow. Software tools

The designer of the 90's: A live demonstration

NASA Technical Reports Server (NTRS)

Green, Tommy L.; Jordan, Basil M., Jr.; Oglesby, Timothy L.

1989-01-01

A survey of design tools to be used by the aircraft designer is given. Structural reliability, maintainability, cost and predictability, and acoustics expert systems are discussed, as well as scheduling, drawing, engineering systems, sizing functions, and standard parts and materials data bases.

O, Canada: NREL Partnership Produces New Take on Alternative Fueling

Science.gov Websites

Fueling Station Locator. The tool, which is part of a significant investment by the Canadian government to to develop a modern, bilingual web tool that makes it easier for drivers of alternative fuel vehicles Locator Tool March 5, 2018 Word of the National Renewable Energy Laboratory's (NREL) deep transportation

A Study on Micro-Machining Technology for the Machining of NiTi: Five-Axis Micro-Milling and Micro Deep-Hole Drilling

NASA Astrophysics Data System (ADS)

Biermann, D.; Kahleyss, F.; Krebs, E.; Upmeier, T.

2011-07-01

Micro-sized applications are gaining more and more relevance for NiTi-based shape memory alloys (SMA). Different types of micro-machining offer unique possibilities for the manufacturing of NiTi components. The advantage of machining is the low thermal influence on the workpiece. This is important, because the phase transformation temperatures of NiTi SMAs can be changed and the components may need extensive post manufacturing. The article offers a simulation-based approach to optimize five-axis micro-milling processes with respect to the special material properties of NiTi SMA. Especially, the influence of the various tool inclination angles is considered for introducing an intelligent tool inclination optimization algorithm. Furthermore, aspects of micro deep-hole drilling of SMAs are discussed. Tools with diameters as small as 0.5 mm are used. The possible length-to-diameter ratio reaches up to 50. This process offers new possibilities in the manufacturing of microstents. The study concentrates on the influence of the cutting speed, the feed and the tool design on the tool wear and the quality of the drilled holes.

On-Line Tool for the Assessment of Radiation in Space - Deep Space Mission Enhancements

NASA Technical Reports Server (NTRS)

Sandridge, Chris a.; Blattnig, Steve R.; Norman, Ryan B.; Slaba, Tony C.; Walker, Steve A.; Spangler, Jan L.

2011-01-01

The On-Line Tool for the Assessment of Radiation in Space (OLTARIS, https://oltaris.nasa.gov) is a web-based set of tools and models that allows engineers and scientists to assess the effects of space radiation on spacecraft, habitats, rovers, and spacesuits. The site is intended to be a design tool for those studying the effects of space radiation for current and future missions as well as a research tool for those developing advanced material and shielding concepts. The tools and models are built around the HZETRN radiation transport code and are primarily focused on human- and electronic-related responses. The focus of this paper is to highlight new capabilities that have been added to support deep space (outside Low Earth Orbit) missions. Specifically, the electron, proton, and heavy ion design environments for the Europa mission have been incorporated along with an efficient coupled electron-photon transport capability to enable the analysis of complicated geometries and slabs exposed to these environments. In addition, a neutron albedo lunar surface environment was also added, that will be of value for the analysis of surface habitats. These updates will be discussed in terms of their implementation and on how OLTARIS can be used by instrument vendors, mission designers, and researchers to analyze their specific requirements.12

The possible contribution of student drawings to evaluation in a new problem-based learning medical programme: a pilot study.

PubMed

McLean, Michelle; Henson, Quanta; Hiles, Linda

2003-10-01

In January 2001, the Nelson R. Mandela School of Medicine in Durban, South Africa implemented Year 1 of a problem-based learning (PBL) curriculum. In attempting to comprehensively evaluate the first year, every aspect was investigated. Problem-based learning requires that, in addition to skills competency and knowledge acquisition, students undergo personal development on their journey towards becoming reflective professionals. Suitable methods of evaluation are therefore necessary to measure some of the new objectives. This discussion appraises the possible use of student drawings as a qualitative evaluation tool. At the end of the first academic year, students were asked to reflect on their experiences during the year by drawing (with brief explanations) how they saw themselves at the beginning (retrospective) and then at the end of the year. Drawings were interpreted in terms of reference to the new programme, and were categorised as disparaging, ambivalent or affirming. The results far exceeded expectations, providing a rich data source regarding student perceptions of their experiences in their first year. In response to the drawings, immediate remedial action was taken: for example, continuous assessment was introduced for the objective structured clinical examination (OSCE) and orientation was extended to 3 weeks to provide students with a better understanding of the PBL process. From this pilot study, there can be no doubt that student drawings can give us valuable insight into the world of the learner, providing us with information that cannot be gleaned from any other evaluation. We will continue to use drawings formatively, perhaps extending their use into portfolios.

Investigation on the Residual Stress State of Drawn Tubes by Numerical Simulation and Neutron Diffraction Analysis

PubMed Central

Palkowski, Heinz; Brück, Sebastian; Pirling, Thilo; Carradò, Adele

2013-01-01

Cold drawing is widely applied in the industrial production of seamless tubes, employed for various mechanical applications. During pre-processing, deviations in tools and their adjustment lead to inhomogeneities in the geometry of the tubes and cause a gradient in residuals. In this paper a three dimensional finite element (3D-FE)-model is presented which was developed to calculate the change in wall thickness, eccentricity, ovality and residual macro-stress state of the tubes, produced by cold drawing. The model simulates the drawing process of tubes, drawn with and without a plug. For finite element modelling, the commercial software package Abaqus was used. To validate the model, neutron strain imaging measurements were performed on the strain imaging instrument SALSA at the Institute Laue Langevin (ILL, Grenoble, France) on a series of SF-copper tubes, drawn under controlled laboratory conditions, varying the drawing angle and the plug geometry. It can be stated that there is sufficient agreement between the finite element method (FEM)-calculation and the neutron stress determination. PMID:28788380

Technological Innovation: Roles and Implications in Army Aviations Special Operations

DTIC Science & Technology

2008-12-01

factor in winning a war comes down to the individual soldier, not having the correct tools and equipment to efficiently complete the mission can...years later by the Army’s Signal Corps. The balloon was used as an effective tool for not only conducting aerial observation but also in...known air platform was also being developed, the helicopter. The concept of the helicopter has roots that go as far back as DaVinci with his drawings

Domain-specific languages and diagram customization for a concurrent engineering environment

NASA Astrophysics Data System (ADS)

Cole, B.; Dubos, G.; Banazadeh, P.; Reh, J.; Case, K.; Wang, Y.; Jones, S.; Picha, F.

A major open question for advocates of Model-Based Systems Engineering (MBSE) is the question of how system and subsystem engineers will work together. The Systems Modeling Language (SysML), like any language intended for a large audience, is in tension between the desires for simplicity and for expressiveness. In order to be more expressive, many specialized language elements may be introduced, which will unfortunately make a complete understanding of the language a more daunting task. While this may be acceptable for systems modelers, it will increase the challenge of including subsystem engineers in the modeling effort. One possible answer to this situation is the use of Domain-Specific Languages (DSL), which are fully supported by the Unified Modeling Language (UML). SysML is in fact a DSL for systems engineering. The expressive power of a DSL can be enhanced through the use of diagram customization. Various domains have already developed their own schematic vocabularies. Within the space engineering community, two excellent examples are the propulsion and telecommunication subsystems. A return to simple box-and-line diagrams (e.g., the SysML Internal Block Diagram) are in many ways a step backward. In order allow subsystem engineers to contribute directly to the model, it is necessary to make a system modeling tool at least approximate in accessibility to drawing tools like Microsoft PowerPoint and Visio. The challenge is made more extreme in a concurrent engineering environment, where designs must often be drafted in an hour or two. In the case of the Jet Propulsion Laboratory's Team X concurrent design team, a subsystem is specified using a combination of PowerPoint for drawing and Excel for calculation. A pilot has been undertaken in order to meld the drawing portion and the production of master equipment lists (MELs) via a SysML authoring tool, MagicDraw. Team X currently interacts with its customers in a process of sharing presentations. There are severa- inefficiencies that arise from this situation. The first is that a customer team must wait two weeks to a month (which is 2-4 times the duration of most Team X studies themselves) for a finalized, detailed design description. Another is that this information must be re-entered by hand into the set of engineering artifacts and design tools that the mission concept team uses after a study is complete. Further, there is no persistent connection to Team X or institutionally shared formulation design tools and data after a given study, again reducing the direct reuse of designs created in a Team X study. This paper presents the underpinnings of subsystem DSLs as they were developed for this pilot. This includes specialized semantics for different domains as well as the process by which major categories of objects were derived in support of defining the DSLs. The feedback given to us by the domain experts on usability, along with a pilot study with the partial inclusion of these tools is also discussed.

Domain-Specific Languages and Diagram Customization for a Concurrent Engineering Environment

NASA Technical Reports Server (NTRS)

Cole, Bjorn; Dubos, Greg; Banazadeh, Payam; Reh, Jonathan; Case, Kelley; Wang, Yeou-Fang; Jones, Susan; Picha, Frank

2013-01-01

A major open question for advocates of Model-Based Systems Engineering (MBSE) is the question of how system and subsystem engineers will work together. The Systems Modeling Language (SysML), like any language intended for a large audience, is in tension between the desires for simplicity and for expressiveness. In order to be more expressive, many specialized language elements may be introduced, which will unfortunately make a complete understanding of the language a more daunting task. While this may be acceptable for systems modelers, it will increase the challenge of including subsystem engineers in the modeling effort. One possible answer to this situation is the use of Domain-Specific Languages (DSL), which are fully supported by the Unified Modeling Language (UML). SysML is in fact a DSL for systems engineering. The expressive power of a DSL can be enhanced through the use of diagram customization. Various domains have already developed their own schematic vocabularies. Within the space engineering community, two excellent examples are the propulsion and telecommunication subsystems. A return to simple box-and-line diagrams (e.g., the SysML Internal Block Diagram) are in many ways a step backward. In order allow subsystem engineers to contribute directly to the model, it is necessary to make a system modeling tool at least approximate in accessibility to drawing tools like Microsoft PowerPoint and Visio. The challenge is made more extreme in a concurrent engineering environment, where designs must often be drafted in an hour or two. In the case of the Jet Propulsion Laboratory's Team X concurrent design team, a subsystem is specified using a combination of PowerPoint for drawing and Excel for calculation. A pilot has been undertaken in order to meld the drawing portion and the production of master equipment lists (MELs) via a SysML authoring tool, MagicDraw. Team X currently interacts with its customers in a process of sharing presentations. There are several inefficiencies that arise from this situation. The first is that a customer team must wait two weeks to a month (which is 2-4 times the duration of most Team X studies themselves) for a finalized, detailed design description. Another is that this information must be re-entered by hand into the set of engineering artifacts and design tools that the mission concept team uses after a study is complete. Further, there is no persistent connection to Team X or institutionally shared formulation design tools and data after a given study, again reducing the direct reuse of designs created in a Team X study. This paper presents the underpinnings of subsystem DSLs as they were developed for this pilot. This includes specialized semantics for different domains as well as the process by which major categories of objects were derived in support of defining the DSLs. The feedback given to us by the domain experts on usability, along with a pilot study with the partial inclusion of these tools is also discussed.

The effect of abdominal drawing-in exercise and myofascial release on pain, flexibility, and balance of elderly females.

PubMed

Yu, Seong Hun; Sim, Yong Hyeon; Kim, Myung Hoon; Bang, Ju Hee; Son, Kyung Hyun; Kim, Jae Woong; Kim, Hyun Jin

2016-10-01

[Purpose] This study is designed to compare the effects of abdominal drawing-in exercise and myofascial release on pain, flexibility, and balance of elderly females. [Subjects and Methods] Forty elderly females aged 65 or older who had complained of low back pain for three months or longer were selected as the subjects. They were randomly and equally assigned to either an abdominal drawing-in group or a myofascial release group. The subjects conducted exercise three times per week, 40 minutes each time, for eight weeks. As evaluation tools, visual analogue scale for pain, remodified schober test for flexibility, and upright posture with eye opening on hard platform, upright posture with eye closing on hard platform, upright posture with eye opening on soft platform, upright posture with eye closing on soft platform using tetrax for balance were used. [Results] The abdominal drawing-in exercise group saw significant difference in pain and balance after the exercise compared to before the exercise. The myofascial release group saw significant difference in pain and flexibility after exercise compared to before the exercise. [Conclusion] The above study showed that abdominal drawing-in exercise affected elderly females regarding pain and balance and myofascial release influenced their pain and flexibility.

Effectiveness and Adoption of a Drawing-to-Learn Study Tool for Recall and Problem Solving: Minute Sketches with Folded Lists

PubMed Central

Heideman, Paul D.; Flores, K. Adryan; Sevier, Lu M.; Trouton, Kelsey E.

2017-01-01

Drawing by learners can be an effective way to develop memory and generate visual models for higher-order skills in biology, but students are often reluctant to adopt drawing as a study method. We designed a nonclassroom intervention that instructed introductory biology college students in a drawing method, minute sketches in folded lists (MSFL), and allowed them to self-assess their recall and problem solving, first in a simple recall task involving non-European alphabets and later using unfamiliar biology content. In two preliminary ex situ experiments, students had greater recall on the simple learning task, non-European alphabets with associated phonetic sounds, using MSFL in comparison with a preferred method, visual review (VR). In the intervention, students studying using MSFL and VR had ∼50–80% greater recall of content studied with MSFL and, in a subset of trials, better performance on problem-solving tasks on biology content. Eight months after beginning the intervention, participants had shifted self-reported use of drawing from 2% to 20% of study time. For a small subset of participants, MSFL had become a preferred study method, and 70% of participants reported continued use of MSFL. This brief, low-cost intervention resulted in enduring changes in study behavior. PMID:28495932

Data assimilation for the investigation of deep temperature and geothermal energy in the Netherlands.

NASA Astrophysics Data System (ADS)

Bonté, Damien; Limberger, Jon; Lipsey, Lindsey; Cloetingh, Sierd; van Wees, Jan-Diederik

2016-04-01

Deep geothermal energy systems, mostly for the direct use of heat, have been attracting more and more interest in the past 10 years in Western Europe. In the Netherlands, where the sector took off with the first system in 2005, geothermal energy is seen has a key player for a sustainable future. To support the development of deep geothermal energy system, the scientific community has been working on tools that could be used to highlight area of potential interest for geothermal exploration. In the Netherlands, ThermoGIS is one such tool that has been developed to inform the general public, policy makers, and developers in the energy sector of the possibility of geothermal energy development. One major component incorporated in this tool is the temperature model. For the Netherlands, we created a thermal model at the lithospheric scale that focus on the sedimentary deposits for deep geothermal exploration. This regional thermal modelling concentrates on the variations of geological thermal conductivity and heat production both in the sediments and in the crust. In addition, we carried out special modelling in order to specifically understand convectivity in the basin, focusing on variations at a regional scale. These works, as well as recent improved of geological knowledge in the deeper part of the basin, show interesting evidence for geothermal energy development. At this scale, the aim of this work is to build on these models and, using data assimilation, to discriminate in the actual causes of the observed anomalies. The temperature results obtained for the Netherlands show some thermal patterns that relate to the variation of the thermal conductivity and the geometry of the sediments. There is also strong evidence to indicate that deep convective flows are responsible for thermal anomalies. The combination of conductive and local convective thermal patterns makes the deeper part of the Dutch sedimentary basin of great interest for the development of geothermal energy.

The deep-sea under global change.

PubMed

Danovaro, Roberto; Corinaldesi, Cinzia; Dell'Anno, Antonio; Snelgrove, Paul V R

2017-06-05

The deep ocean encompasses 95% of the oceans' volume and is the largest and least explored biome of Earth's Biosphere. New life forms are continuously being discovered. The physiological mechanisms allowing organisms to adapt to extreme conditions of the deep ocean (high pressures, from very low to very high temperatures, food shortage, lack of solar light) are still largely unknown. Some deep-sea species have very long life-spans, whereas others can tolerate toxic compounds at high concentrations; these characteristics offer an opportunity to explore the specialized biochemical and physiological mechanisms associated with these responses. Widespread symbiotic relationships play fundamental roles in driving host functions, nutrition, health, and evolution. Deep-sea organisms communicate and interact through sound emissions, chemical signals and bioluminescence. Several giants of the oceans hunt exclusively at depth, and new studies reveal a tight connection between processes in the shallow water and some deep-sea species. Limited biological knowledge of the deep-sea limits our capacity to predict future response of deep-sea organisms subject to increasing human pressure and changing global environmental conditions. Molecular tools, sensor-tagged animals, in situ and laboratory experiments, and new technologies can enable unprecedented advancement of deep-sea biology, and facilitate the sustainable management of deep ocean use under global change. Copyright © 2017. Published by Elsevier Ltd.

High Temperature Logging and Monitoring Instruments to Explore and Drill Deep into Hot Oceanic Crust.

NASA Astrophysics Data System (ADS)

Denchik, N.; Pezard, P. A.; Ragnar, A.; Jean-Luc, D.; Jan, H.

2014-12-01

Drilling an entire section of the oceanic crust and through the Moho has been a goal of the scientific community for more than half of a century. On the basis of ODP and IODP experience and data, this will require instruments and strategies working at temperature far above 200°C (reached, for example, at the bottom of DSDP/ODP Hole 504B), and possibly beyond 300°C. Concerning logging and monitoring instruments, progress were made over the past ten years in the context of the HiTI ("High Temperature Instruments") project funded by the european community for deep drilling in hot Icelandic geothermal holes where supercritical conditions and a highly corrosive environment are expected at depth (with temperatures above 374 °C and pressures exceeding 22 MPa). For example, a slickline tool (memory tool) tolerating up to 400°C and wireline tools up to 300°C were developed and tested in Icelandic high-temperature geothermal fields. The temperature limitation of logging tools was defined to comply with the present limitation in wireline cables (320°C). As part of this new set of downhole tools, temperature, pressure, fluid flow and casing collar location might be measured up to 400°C from a single multisensor tool. Natural gamma radiation spectrum, borehole wall ultrasonic images signal, and fiber optic cables (using distributed temperature sensing methods) were also developed for wireline deployment up to 300°C and tested in the field. A wireline, dual laterolog electrical resistivity tool was also developed but could not be field tested as part of HiTI. This new set of tools constitutes a basis for the deep exploration of the oceanic crust in the future. In addition, new strategies including the real-time integration of drilling parameters with modeling of the thermo-mechanical status of the borehole could be developed, using time-lapse logging of temperature (for heat flow determination) and borehole wall images (for hole stability and in-situ stress determination) as boundary conditions for the models. In all, and with limited integration of existing tools, to deployment of high-temperature downhole tools could contribute largely to the success of the long awaited Mohole project.

A Sociocultural Approach to Children's Perceptions of Death and Loss.

PubMed

Yang, Sungeun; Park, Soyeon

2017-11-01

By employing the phenomenographic approach, the present study explored children's cognitive understanding of and emotional responses to death and bereavement. Participants included 52 Korean, 16 Chinese, and 16 Chinese American children ages 5-6. Thematic analysis of children's drawings and open-ended interviews revealed that most children associated death with negative emotions such as fear, anxiety, and sadness. The majority of children used realistic expressions to narrate death. The core themes from their drawings included causes for death, attempts to stop the dying, and situations after death. This study contributes to the literature by targeting young children who have been relatively excluded in death studies and provides evidence in the usefulness of drawings as a developmentally appropriate data collection tool. The findings also enrich our knowledge about children's understanding of death and bereavement, rooted in the inductive analysis of empirical data with children from culturally diverse backgrounds.

Drawing the PDB: Protein-Ligand Complexes in Two Dimensions.

PubMed

Stierand, Katrin; Rarey, Matthias

2010-12-09

The two-dimensional representation of molecules is a popular communication medium in chemistry and the associated scientific fields. Computational methods for drawing small molecules with and without manual investigation are well-established and widely spread in terms of numerous software tools. Concerning the planar depiction of molecular complexes, there is considerably less choice. We developed the software PoseView, which automatically generates two-dimensional diagrams of macromolecular complexes, showing the ligand, the interactions, and the interacting residues. All depicted molecules are drawn on an atomic level as structure diagrams; thus, the output plots are clearly structured and easily readable for the scientist. We tested the performance of PoseView in a large-scale application on nearly all druglike complexes of the PDB (approximately 200000 complexes); for more than 92% of the complexes considered for drawing, a layout could be computed. In the following, we will present the results of this application study.

Frictional interactions in forming processes: New studies with transparent sapphire strip-drawing dies

NASA Astrophysics Data System (ADS)

Rao, R. S.; Lu, C. Y.; Wright, P. K.; Devenpeck, M. L.; Richmond, O.; Appleby, E. J.

1982-05-01

This research is concerned with the frictional interactions at the toolwork interfaces in the machining and strip-drawing processes. A novel feature is that transparent sapphire (single crystal Al2O3) is being used as the tool and die material. This allows the tribological features of the interface to be directly observed and recorded on movie-film. These qualitative studies provide information on the role of lubricants. In addition, techniques are being developed to quantify the velocity gradient along the interface. For example, in the drawing work it has been found that tracer markings (e.g. dye-spots), applied to the undrawn strip, remain intact during drawing and can be tracked along the sapphire/strip interface. Such data will be used as input to a finite-element, elasto-plastic-workhardening model of the deformation process. The latter can compute strip deformation characteristics, drawing forces and local coefficients of friction at the interface. Introductory results will be presented in this paper, obtained from drawing tin-plated mild steel with sapphire and cemented carbide dies. Drawing loads and die-separating forces will be presented and movie-films of the action of tracer markings at the interface shown. In order to demonstrate how this data can be used in an analysis of a large strain deformation process with friction, initial results from running the FIPDEF elasto-plastic code will be discussed. From a commercial viewpoint research on strip-drawing is of special interest to the can-making industry. From a physical viewpoint stripdrawing is of particular interest because it is a symmetrical, plane strain deformation and, in comparison with other metal processing operations, it is more readily modeled. However, until now the elasto-plastic codes that have been developed to predictively model drawing have had limitations: the most notable being that of quantifying the friction conditions at the die-work interface. Hence the specification of the latter is the ultimate goal of this research program.

Supporting Positive Behaviour in Alberta Schools: A School-Wide Approach

ERIC Educational Resources Information Center

Mackenzie, Nancy

2008-01-01

Drawing on current research and best practices, this three-part resource, "Supporting Positive Behaviour in Alberta Schools," provides information, strategies, stories from schools and sample tools for systematically teaching, supporting and reinforcing positive behaviour. This integrated system of school-wide, classroom management, and…

Adaptation of a commercial robot for genome library replication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uber, D.C.; Searles, W.L.

1994-01-01

This report describes tools and fixtures developed at the Human Genome Center at Lawrence Berkeley Laboratory for the Hewlett-Packard ORCA{trademark} (Optimized Robot for Chemical Analysis) to replicate large genome libraries. Photographs and engineering drawings of the various custom-designed components are included.

Basic Drafting. Revised.

ERIC Educational Resources Information Center

Schertz, Karen

This introductory module on drafting includes the technical content and tasks necessary for a student to be employed in an entry-level drafting occupation. The module contains 18 instructional units that cover the following topics: introduction to drafting; tools and equipment; supplies and materials; sketching; scales; drawing format; lettering;…

The Joint Accomplishment of Identity

ERIC Educational Resources Information Center

Hand, Victoria; Gresalfi, Melissa

2015-01-01

Identity has become a central concept in the analysis of learning from social perspectives. In this article, we draw on a situative perspective to conceptualize identity as a "joint accomplishment" between individuals and their interactions with norms, practices, cultural tools, relationships, and institutional and cultural contexts.…

Standardized Curriculum for Carpentry.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: carpentry I and II. The seven units in carpentry I are as follows: introduction and orientation; safety; measurement; tools and equipment; basic concepts in carpentry; reading blueprints and working drawings; and foundations.…

An interactive tool for gamut masking

NASA Astrophysics Data System (ADS)

Song, Ying; Lau, Cheryl; Süsstrunk, Sabine

2014-02-01

Artists often want to change the colors of an image to achieve a particular aesthetic goal. For example, they might limit colors to a warm or cool color scheme to create an image with a certain mood or feeling. Gamut masking is a technique that artists use to limit the set of colors they can paint with. They draw a mask over a color wheel and only use the hues within the mask. However, creating the color palette from the mask and applying the colors to the image requires skill. We propose an interactive tool for gamut masking that allows amateur artists to create an image with a desired mood or feeling. Our system extracts a 3D color gamut from the 2D user-drawn mask and maps the image to this gamut. The user can draw a different gamut mask or locally refine the image colors. Our voxel grid gamut representation allows us to represent gamuts of any shape, and our cluster-based image representation allows the user to change colors locally.

The t-test: An Influential Inferential Tool in Chaplaincy and Other Healthcare Research.

PubMed

Jankowski, Katherine R B; Flannelly, Kevin J; Flannelly, Laura T

2018-01-01

The t-test developed by William S. Gosset (also known as Student's t-test and the two-sample t-test) is commonly used to compare one sample mean on a measure with another sample mean on the same measure. The outcome of the t-test is used to draw inferences about how different the samples are from each other. It is probably one of the most frequently relied upon statistics in inferential research. It is easy to use: a researcher can calculate the statistic with three simple tools: paper, pen, and a calculator. A computer program can quickly calculate the t-test for large samples. The ease of use can result in the misuse of the t-test. This article discusses the development of the original t-test, basic principles of the t-test, two additional types of t-tests (the one-sample t-test and the paired t-test), and recommendations about what to consider when using the t-test to draw inferences in research.

Incorporating deep learning with convolutional neural networks and position specific scoring matrices for identifying electron transport proteins.

PubMed

Le, Nguyen-Quoc-Khanh; Ho, Quang-Thai; Ou, Yu-Yen

2017-09-05

In several years, deep learning is a modern machine learning technique using in a variety of fields with state-of-the-art performance. Therefore, utilization of deep learning to enhance performance is also an important solution for current bioinformatics field. In this study, we try to use deep learning via convolutional neural networks and position specific scoring matrices to identify electron transport proteins, which is an important molecular function in transmembrane proteins. Our deep learning method can approach a precise model for identifying of electron transport proteins with achieved sensitivity of 80.3%, specificity of 94.4%, and accuracy of 92.3%, with MCC of 0.71 for independent dataset. The proposed technique can serve as a powerful tool for identifying electron transport proteins and can help biologists understand the function of the electron transport proteins. Moreover, this study provides a basis for further research that can enrich a field of applying deep learning in bioinformatics. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Atelocollagen sponge and recombinant basic fibroblast growth factor combination therapy for resistant wounds with deep cavities.

PubMed

Nakanishi, Asako; Hakamada, Arata; Isoda, Ken-ichi; Mizutani, Hitoshi

2005-05-01

Recent advances in bioengineering have introduced materials that enhance wound healing. Even with such new tools, some deep ulcers surrounded by avascular tissues, including bone, tendon, and fascia, are resistant to various therapies and easily form deep cavities with loss of subcutaneous tissue. Atelocollagen sponges have been used as an artificial dermis to cover full-thickness skin defects. Topical recombinant human basic fibroblast growth factor has been introduced as a growth factor to induce fibroblast proliferation in skin ulcers. We applied these materials in combination in two patients with deep resistant wounds: one with a cavity reaching the mediastinum through a divided sternum and one with deep necrotic wounds caused by electric burns. These wounds did not respond to the topical basic fibroblast growth factor alone. In contrast, the combination therapy closed the wounds rapidly without further surgical treatment. This combination therapy is a potent treatment for resistant wounds with deep cavities.

Extracting Databases from Dark Data with DeepDive.

PubMed

Zhang, Ce; Shin, Jaeho; Ré, Christopher; Cafarella, Michael; Niu, Feng

2016-01-01

DeepDive is a system for extracting relational databases from dark data : the mass of text, tables, and images that are widely collected and stored but which cannot be exploited by standard relational tools. If the information in dark data - scientific papers, Web classified ads, customer service notes, and so on - were instead in a relational database, it would give analysts a massive and valuable new set of "big data." DeepDive is distinctive when compared to previous information extraction systems in its ability to obtain very high precision and recall at reasonable engineering cost; in a number of applications, we have used DeepDive to create databases with accuracy that meets that of human annotators. To date we have successfully deployed DeepDive to create data-centric applications for insurance, materials science, genomics, paleontologists, law enforcement, and others. The data unlocked by DeepDive represents a massive opportunity for industry, government, and scientific researchers. DeepDive is enabled by an unusual design that combines large-scale probabilistic inference with a novel developer interaction cycle. This design is enabled by several core innovations around probabilistic training and inference.

Surgical tool alignment guidance by drawing two cross-sectional laser-beam planes.

PubMed

Nakajima, Yoshikazu; Dohi, Takeyoshi; Sasama, Toshihiko; Momoi, Yasuyuki; Sugano, Nobuhiko; Tamura, Yuichi; Lim, Sung-hwan; Sakuma, Ichiro; Mitsuishi, Mamoru; Koyama, Tsuyoshi; Yonenobu, Kazuo; Ohashi, Satoru; Bessho, Masahiko; Ohnishi, Isao

2013-06-01

Conventional surgical navigation requires for surgeons to move their sight and conscious off the surgical field when checking surgical tool's positions shown on the display panel. Since that takes high risks of surgical exposure possibilities to the patient's body, we propose a novel method for guiding surgical tool position and orientation directly in the surgical field by a laser beam. In our navigation procedure, two cross-sectional planar laser beams are emitted from the two laser devices attached onto both sides of an optical localizer, and show surgical tool's entry position on the patient's body surface and its orientation on the side face of the surgical tool. In the experiments, our method gave the surgeons precise and accurate surgical tool adjusting and showed the feasibility to apply to both of open and percutaneous surgeries.

Simulation in the Service of Design - Asking the Right Questions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donn, Michael; Selkowitz, Stephen; Bordass, Bill

2009-03-01

This paper proposes an approach to the creation of design tools that address the real information needs of designers in the early stages of design of nonresidential buildings. Traditional simplified design tools are typically too limited to be of much use, even in conceptual design. The proposal is to provide access to the power of detailed simulation tools, at a stage in design when little is known about the final building, but at a stage also when the freedom to explore options is greatest. The proposed approach to tool design has been derived from consultation with design analysis teams asmore » part of the COMFEN tool development. The paper explores how tools like COMFEN have been shaped by this consultation and how requests from these teams for real-world relevance might shape such tools in the future, drawing into the simulation process the lessons from Post Occupancy Evaluation (POE) of buildings.« less

Analysis of the Lankford coefficient evolution at different strain rates for AA6016-T4, DP800 and DC06

NASA Astrophysics Data System (ADS)

Lenzen, Matthias; Merklein, Marion

2017-10-01

In the automotive sector, a major challenge is the deep-drawing of modern lightweight sheet metals with limited formability. Thus, conventional material models lack in accuracy due to the complex material behavior. A current field of research takes into account the evolution of the Lankford coefficient. Today, changes in anisotropy under increasing degree of deformation are not considered. Only a consolidated average value of the Lankford coefficient is included in conventional material models. This leads to an increasing error in prediction of the flow behavior and therefore to an inaccurate prognosis of the forming behavior. To increase the accuracy of the prediction quality, the strain dependent Lankford coefficient should be respected, because the R-value has a direct effect on the contour of the associated flow rule. Further, the investigated materials show a more or less extinct rate dependency of the yield stress. For this reason, the rate dependency of the Lankford coefficient during uniaxial tension is focused within this contribution. To quantify the influence of strain rate on the Lankford coefficient, tensile tests are performed for three commonly used materials, the aluminum alloy AA6016-T4, the advanced high strength steel DP800 and the deep drawing steel DC06 at three different strain rates. The strain measurement is carried out by an optical strain measurement system. An evolution of the Lankford coefficient was observed for all investigated materials. Also, an influence of the deformation velocity on the anisotropy could be detected.

Application Of A New Semi-Empirical Model For Forming Limit Prediction Of Sheet Material Including Superposed Loads Of Bending And Shearing

NASA Astrophysics Data System (ADS)

Held, Christian; Liewald, Mathias; Schleich, Ralf; Sindel, Manfred

2010-06-01

The use of lightweight materials offers substantial strength and weight advantages in car body design. Unfortunately such kinds of sheet material are more susceptible to wrinkling, spring back and fracture during press shop operations. For characterization of capability of sheet material dedicated to deep drawing processes in the automotive industry, mainly Forming Limit Diagrams (FLD) are used. However, new investigations at the Institute for Metal Forming Technology have shown that High Strength Steel Sheet Material and Aluminum Alloys show increased formability in case of bending loads are superposed to stretching loads. Likewise, by superposing shearing on in plane uniaxial or biaxial tension formability changes because of materials crystallographic texture. Such mixed stress and strain conditions including bending and shearing effects can occur in deep-drawing processes of complex car body parts as well as subsequent forming operations like flanging. But changes in formability cannot be described by using the conventional FLC. Hence, for purpose of improvement of failure prediction in numerical simulation codes significant failure criteria for these strain conditions are missing. Considering such aspects in defining suitable failure criteria which is easy to implement into FEA a new semi-empirical model has been developed considering the effect of bending and shearing in sheet metals formability. This failure criterion consists of the combination of the so called cFLC (combined Forming Limit Curve), which considers superposed bending load conditions and the SFLC (Shear Forming Limit Curve), which again includes the effect of shearing on sheet metal's formability.

Affective cognition: Exploring lay theories of emotion.

PubMed

Ong, Desmond C; Zaki, Jamil; Goodman, Noah D

2015-10-01

Humans skillfully reason about others' emotions, a phenomenon we term affective cognition. Despite its importance, few formal, quantitative theories have described the mechanisms supporting this phenomenon. We propose that affective cognition involves applying domain-general reasoning processes to domain-specific content knowledge. Observers' knowledge about emotions is represented in rich and coherent lay theories, which comprise consistent relationships between situations, emotions, and behaviors. Observers utilize this knowledge in deciphering social agents' behavior and signals (e.g., facial expressions), in a manner similar to rational inference in other domains. We construct a computational model of a lay theory of emotion, drawing on tools from Bayesian statistics, and test this model across four experiments in which observers drew inferences about others' emotions in a simple gambling paradigm. This work makes two main contributions. First, the model accurately captures observers' flexible but consistent reasoning about the ways that events and others' emotional responses to those events relate to each other. Second, our work models the problem of emotional cue integration-reasoning about others' emotion from multiple emotional cues-as rational inference via Bayes' rule, and we show that this model tightly tracks human observers' empirical judgments. Our results reveal a deep structural relationship between affective cognition and other forms of inference, and suggest wide-ranging applications to basic psychological theory and psychiatry. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

Skill components of task analysis

PubMed Central

Rogers, Wendy A.; Fisk, Arthur D.

2017-01-01

Some task analysis methods break down a task into a hierarchy of subgoals. Although an important tool of many fields of study, learning to create such a hierarchy (redescription) is not trivial. To further the understanding of what makes task analysis a skill, the present research examined novices’ problems with learning Hierarchical Task Analysis and captured practitioners’ performance. All participants received a task description and analyzed three cooking and three communication tasks by drawing on their knowledge of those tasks. Thirty six younger adults (18–28 years) in Study 1 analyzed one task before training and five afterwards. Training consisted of a general handout that all participants received and an additional handout that differed between three conditions: a list of steps, a flow-diagram, and concept map. In Study 2, eight experienced task analysts received the same task descriptions as in Study 1 and demonstrated their understanding of task analysis while thinking aloud. Novices’ initial task analysis scored low on all coding criteria. Performance improved on some criteria but was well below 100 % on others. Practitioners’ task analyses were 2–3 levels deep but also scored low on some criteria. A task analyst’s purpose of analysis may be the reason for higher specificity of analysis. This research furthers the understanding of Hierarchical Task Analysis and provides insights into the varying nature of task analyses as a function of experience. The derived skill components can inform training objectives. PMID:29075044

Concept Map Value Propagation for Tactical Intelligence

DTIC Science & Technology

2007-06-01

meaningful diagrams: KMap, SmartDraw , MindGenius, and so on. However, CmapTools is the package we are using for this project. The software , produced by the...Cmap, driven by expected variability in the value of a datum and cost to get a new value. We use the CmapTools software developed with DoD support at... software developed with DoD support at the Institute of Human and Machine Cognition as a structural basis for creating and assessing tactical Cmaps. The

Source Selection Simulation: Intact Team Training on Picking a Provider

DTIC Science & Technology

2015-06-01

seat of a new $100 million stealth fighter before giving her flight simulation time. The ar- gument for source-selection simulation ( SSS ) training is...dynamic is the creation of the SSS Tool. Drawing on his success in using a similar tool in contingency contracting, Long decided we should use a Web...of SSS intact team training. On Sept. 30–Oct. 3, 2014, Professors Long and Elsesser de- livered DAU’s first-ever Intact Team SSS Training to Eglin’s

Fracture - An Unforgiving Failure Mode

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

During the 2005 Conference for the Advancement for Space Safety, after a typical presentation of safety tools, a Russian in the audience simply asked, "How does that affect the hardware?" Having participated in several International System Safety Conferences, I recalled that most attention is dedicated to safety tools and little, if any, to hardware. The intent of this paper on the hazard of fracture and failure modes associated with fracture is my attempt to draw attention to the grass roots of system safety - improving hardware robustness and resilience.

Children's experiences of living with asthma: fear of exacerbations and being ostracized.

PubMed

Trollvik, Anne; Nordbach, Reidun; Silén, Charlotte; Ringsberg, Karin C

2011-08-01

The aim of the study was to explore children's experiences of asthma to tailor a learning program based on their perspectives. Fifteen children (7-10 years) were interviewed, and they narrated the meaning behind their drawings; a phenomenological hermeneutical approach was used in the analysis. The findings are described in two themes with five subthemes: fear of exacerbation (bodily sensations, frightening experiences, and loss of control) and fear of being ostracized (experiences of being excluded and dilemma of keeping the asthma secret or being open about it). Drawings are a good tool for initiating a dialogue with children. Copyright © 2011 Elsevier Inc. All rights reserved.

Research and Development for Technology Evolution Potential Forecasting System

NASA Astrophysics Data System (ADS)

Gao, Changqing; Cao, Shukun; Wang, Yuzeng; Ai, Changsheng; Ze, Xiangbo

Technology forecasting is a powerful weapon for many enterprises to gain an animate future. Evolutionary potential radar plot is a necessary step of some valuable methods to help the technology managers with right technical strategy. A software system for Technology Evolution Potential Forecasting (TEPF) with automatic radar plot drawing is introduced in this paper. The framework of the system and the date structure describing the concrete evolution pattern are illustrated in details. And the algorithm for radar plot drawing is researched. It is proved that the TEPF system is an effective tool during the technology strategy analyzing process with a referenced case study.

Targeting Instruction with Formative Assessment Probes

ERIC Educational Resources Information Center

Fagan, Emily R.; Tobey, Cheryl Rose; Brodesky, Amy R.

2016-01-01

This article introduces the formative assessment probe--a powerful tool for collecting focused, actionable information about student thinking and potential misconceptions--along with a process for targeting instruction in response to probe results. Drawing on research about common student mathematical misconceptions as well as the former work of…

Teaching Science through Pictorial Models during Read-Alouds

ERIC Educational Resources Information Center

Oliveira, Alandeom W.; Rivera, Seema; Glass, Rory; Mastroianni, Michael; Wizner, Francine; Amodeo, Vincent

2013-01-01

This study examines how three elementary teachers refer to pictorial models (photographs, drawings, and cartoons) during science read-alouds. While one teacher used realistic photographs for the purpose of visually verifying facts about crystals, another employed analytical diagrams as heuristic tools to help students visualize complex target…