16 CFR Appendix A6 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service...

16 CFR Appendix A8 to Part 305 - Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...

16 CFR Appendix A8 to Part 305 - Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...

16 CFR Appendix A4 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service...

16 CFR Appendix A7 to Part 305 - Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service Range...

16 CFR Appendix A4 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service...

16 CFR Appendix A8 to Part 305 - Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...

16 CFR Appendix A5 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service...

16 CFR Appendix A7 to Part 305 - Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service Range...

16 CFR Appendix A6 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service...

16 CFR Appendix A8 to Part 305 - Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boreyko, Jonathan B.; Srijanto, Bernadeta R.; Nguyen, Trung Dac

Water suspended on chilled superhydrophobic surfaces exhibits delayed freezing; however, the interdrop growth of frost through subcooled condensate forming on the surface seems unavoidable in humid environments. It is therefore of great practical importance to determine whether facile defrosting is possible on superhydrophobic surfaces. Here in this paper, we report that nanostructured superhydrophobic surfaces promote the growth of frost in a suspended Cassie state, enabling its dynamic removal upon partial melting at low tilt angles (<15°). The dynamic removal of the melting frost occurred in two stages: spontaneous dewetting followed by gravitational mobilization. This dynamic defrosting phenomenon is driven bymore » the low contact angle hysteresis of the defrosted meltwater relative to frost on microstructured superhydrophobic surfaces, which forms in the impaled Wenzel state. Dynamic defrosting on nanostructured superhydrophobic surfaces minimizes the time, heat, and gravitational energy required to remove frost from the surface, and is of interest for a variety of systems in cold and humid environments.« less

Meltwater Evolution during Defrosting on Superhydrophobic Surfaces.

PubMed

Chu, Fuqiang; Wu, Xiaomin; Wang, Lingli

2018-01-10

Defrosting is essential for removing frost from engineering surfaces, but some fundamental issues are still unclear, especially for defrosting on superhydrophobic surfaces. Here, defrosting experiments on prepared superhydrophobic surfaces were conducted along with the investigation on meltwater evolution characteristics. According to the experiments, the typical meltwater evolution process on superhydrophobic surfaces can be divided into two stages: dewetting by edge curling and dewetting by shrinkage. The edge curling of a meltwater film is a distinct phenomenon and has been first reported in this work. Profiting from the ultralow adhesion of the superhydrophobic surface, edge curling is mainly attributed to two unbalanced forces (one at the interface between the ice slurry layer and pure water layer and the other in the triple phase line area) acting on the layered meltwater film. During the multi-meltwater evolution process, the nonbreaking of chained droplets on superhydrophobic surfaces is also an interesting phenomenon, which is controlled by the interaction between the surface tension and the retentive force because of contact angle hysteresis. An approximate criterion was then developed to explain and determine the status of chained droplets, and experimental data from various surfaces have validated the effectiveness of this criterion. This work may deepen the understanding of defrosting on superhydrophobic surfaces and promote antifrosting/icing applications in engineering.

Heat pump having improved defrost system

DOEpatents

Chen, Fang C.; Mei, Viung C.; Murphy, Richard W.

1998-01-01

A heat pump system includes, in an operable relationship for transferring heat between an exterior atmosphere and an interior atmosphere via a fluid refrigerant: a compressor; an interior heat exchanger; an exterior heat exchanger; an accumulator; and means for heating the accumulator in order to defrost the exterior heat exchanger.

Heat pump having improved defrost system

DOEpatents

Chen, F.C.; Mei, V.C.; Murphy, R.W.

1998-12-08

A heat pump system includes, in an operable relationship for transferring heat between an exterior atmosphere and an interior atmosphere via a fluid refrigerant: a compressor; an interior heat exchanger; an exterior heat exchanger; an accumulator; and means for heating the accumulator in order to defrost the exterior heat exchanger. 2 figs.

78 FR 41609 - Energy Conservation Program for Consumer Products: Test Procedures for Refrigerators...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

.... Incomplete Cycling 6. Mechanical Temperature Controls 7. Ambient Temperature Gradient 8. Definitions.... at 29846-29847. A broad group of stakeholders \\1\\ submitted a joint comment supporting DOE's proposal... for variable defrost control (a control type in which the time interval between successive defrost...

9 CFR 590.539 - Defrosting operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 590.539 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG... objectionable odors and are unfit for human food (e.g., sour, musty, fermented, or decomposed odors) shall be.... Defrosted liquid shall not be held more than 16 hours prior to processing or drying. (e) Sanitary methods...

16 CFR Appendix A7 to Part 305 - Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial... With Through-the-door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...

16 CFR Appendix A4 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial... Without Through-the-Door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...

16 CFR Appendix A5 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial... Without Through-the-Door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...

16 CFR Appendix A6 to Part 305 - Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial... Freezer Without Through-the-Door Ice Service Range Information Manufacturer's Rated Total Refrigerated...

16 CFR Appendix A8 to Part 305 - Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial... With Through-the-door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...

The Defrosting South

NASA Technical Reports Server (NTRS)

2005-01-01

20 August 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows varied springtime patterns formed in defrosting, seasonal carbon dioxide frost in the south polar region of Mars. The feature sporting an outline of dark spots and an interior of smaller, closely-spaced dark spots and dark-outlined polygons is a patch of windblown or wind-eroded sand that was covered by carbon dioxide frost during the previous autumn and winter. The fainter, larger polygon pattern on either side of the patch of defrosting sand is formed in the substrate upon which the sand patch is sitting. Polygonal forms such as these might indicate the presence of ice below the surface.

Location near: 79.6oS, 125.0oW Image width: width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Spring

Frost sensor for use in defrost controls for refrigeration

DOEpatents

French, Patrick D.; Butz, James R.; Veatch, Bradley D.; O'Connor, Michael W.

2002-01-01

An apparatus and method for measuring the total thermal resistance to heat flow from the air to the evaporative cooler fins of a refrigeration system. The apparatus is a frost sensor that measures the reduction in heat flow due to the added thermal resistance of ice (reduced conduction) as well as the reduction in heat flow due to the blockage of airflow (reduced convection) from excessive ice formation. The sensor triggers a defrost cycle when needed, instead of on a timed interval. The invention is also a method for control of frost in a system that transfers heat from air to a refrigerant along a thermal path. The method involves measuring the thermal conductivity of the thermal path from the air to the refrigerant, recognizing a reduction in thermal conductivity due to the thermal insulation effect of the frost and due to the loss of airflow from excessive ice formation; and controlling the defrosting of the system.

Bio-inspired, colorful, flexible, defrostable light-scattering hybrid films for the effective distribution of LED light.

PubMed

An, Seongpil; Jo, Hong Seok; Kim, Yong Il; Song, Kyo Yong; Kim, Min-Woo; Lee, Kyu Bum; Yarin, Alexander L; Yoon, Sam S

2017-07-06

Bioluminescent jellyfish has a unique structure derived from fiber/polymer interfaces that is advantageous for effective light scattering in the dark, deep sea water. Herein, we demonstrate the fabrication of bio-inspired hybrid films by mimicry of the jellyfish's structure, leading to excellent light-scattering performance and defrosting capability. A haze value reaching 59.3% and a heating temperature of up to 292 °C were achieved with the films. Accordingly, the developed surface constitutes an attractive optical device for lighting applications, especially for street or vehicle luminaries for freezing Arctic-climate countries. The morphological details of the hybrid films were revealed by scanning electron microscopy. The light-scattering properties of these films were examined by ultraviolet-visible-infrared spectrophotometry and anti-glare effect analyses. The defrosting performance of the hybrid films was evaluated via heating tests and infra-red observations.

Defrosting Polar Dunes -- "The Snow Leopard"

NASA Image and Video Library

2000-05-16

The patterns created by dark spots on defrosting south polar dunes are often strange and beautiful. This picture, which the Mars Orbiter Camera team has dubbed, "the snow leopard," shows a dune field located at 61.5°S, 18.9°W, as it appeared on July 1, 1999. The spots are areas where dark sand has been exposed from beneath bright frost as the south polar winter cap begins to retreat. Many of the spots have a diffuse, bright ring around them this is thought to be fresh frost that was re-precipitated after being removed from the dark spot. The spots seen on defrosting polar dunes are a new phenomenon that was not observed by previous spacecraft missions to Mars. Thus, there is much about these features that remains unknown. For example, no one yet knows why the dunes become defrosted by forming small spots that grow and grow over time. No one knows for sure if the bright rings around the dark spots are actually composed of re-precipitated frost. And no one knows for sure why some dune show spots that appear to be "lined-up" (as they do in the picture shown here). This Mars Global Surveyor Mars Orbiter Camera image is illuminated from the upper left. North is toward the upper right. The scale bar indicates a distance of 200 meters (656 feet). http://photojournal.jpl.nasa.gov/catalog/PIA02301

Activating the Microscale Edge Effect in a Hierarchical Surface for Frosting Suppression and Defrosting Promotion

PubMed Central

Chen, Xuemei; Ma, Ruiyuan; Zhou, Hongbo; Zhou, Xiaofeng; Che, Lufeng; Yao, Shuhuai; Wang, Zuankai

2013-01-01

Despite extensive progress, current icephobic materials are limited by the breakdown of their icephobicity in the condensation frosting environment. In particular, the frost formation over the entire surface is inevitable as a result of undesired inter-droplet freezing wave propagation initiated by the sample edges. Moreover, the frost formation directly results in an increased frost adhesion, posing severe challenges for the subsequent defrosting process. Here, we report a hierarchical surface which allows for interdroplet freezing wave propagation suppression and efficient frost removal. The enhanced performances are mainly owing to the activation of the microscale edge effect in the hierarchical surface, which increases the energy barrier for ice bridging as well as engendering the liquid lubrication during the defrosting process. We believe the concept of harnessing the surface morphology to achieve superior performances in two opposite phase transition processes might shed new light on the development of novel materials for various applications. PMID:23981909

Observations of the north polar water ice annulus on Mars using THEMIS and TES

USGS Publications Warehouse

Wagstaff, K.L.; Titus, T.N.; Ivanov, A.B.; Castano, R.; Bandfield, J.L.

2008-01-01

The Martian seasonal CO2 ice caps advance and retreat each year. In the spring, as the CO2 cap gradually retreats, it leaves behind an extensive defrosting zone from the solid CO2 cap to the location where all CO2 frost has sublimated. We have been studying this phenomenon in the north polar region using data from the THermal EMission Imaging System (THEMIS), a visible and infra-red (IR) camera on the Mars Odyssey spacecraft, and the Thermal Emission Spectrometer (TES) on Mars Global Surveyor. Recently, we discovered that some THEMIS images of the CO2 defrosting zone contain evidence for a distinct defrosting phenomenon: some areas just south of the CO2 cap edge are too bright in visible wavelengths to be defrosted terrain, but too warm in the IR to be CO2 ice. We hypothesize that we are seeing evidence for a seasonal annulus of water ice (frost) that recedes with the seasonal CO2 cap, as predicted by previous workers. In this paper, we describe our observations with THEMIS and compare them to simultaneous observations by TES and OMEGA. All three instruments find that this phenomenon is distinct from the CO2 cap and most likely composed of water ice. We also find strong evidence that the annulus widens as it recedes. Finally, we show that this annulus can be detected in the raw THEMIS data as it is collected, enabling future long-term onboard monitoring. ?? 2007.

Measured impacts of supermarket humidity level on defrost performance and refrigerating system energy use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, H.I.; Khattar, M.

This paper presents field-monitor data from two supermarkets where the impact of space humidity on refrigerating system energy use was evaluated. Direct digital control (DDC) systems were used at both stores to collect 15-minute monitored data. At Store A in Minneapolis, the DDC system was used to monitor system performance as well as to implement temperature-terminated control in place of time-terminated control on 16 refrigerated zones using hot gas defrost. At Store B in Indianapolis, the DDC system was used to quantify the performance trends for the single compressor rack system with electric defrost. The results at Store B showedmore » that refrigerating system energy use decreases by nearly 10 kWh/day for each 1% drop in space relative humidity, or about 0.4% of average annual system energy use. This value includes the impact of reduced latent loads, the reduction in direct energy use and imposed load from reduced electric defrost heater operation, and the smaller imposed load from reduced anti-sweat heater energy use. The measured reductions agree well with the impact predicted using the calculation methods developed by Howell (1933b) in ASHRAE Research Project 596. At Store A, the measured data show that implementing temperature-terminated defrost reduced refrigerating system energy use by nearly 70 kWh/day over the winter period when the average space humidity was 22% RH. The savings from temperature-terminated defrost increase by 4 kWh/day per each 1% drop in relative humidity. At both stores, the same type of mechanical controls were used to duty cycle the anti-sweat heaters based on store dew point. Anti-sweat heater electricity use was observed to decrease by 4.6 kWh/day at Store B and 3.4 kWh/day at Store A for each 1% drop in relative humidity. At Store A, a more aggressive control scheme was implemented with the DDC system that reduced anti-sweat heater energy use by 7.8 kWh/day per % RH. The more aggressive control approach was reported to properly control fogging and condensation on display case surfaces. The overall energy reduction factor at the two stores was 12 kWh/day per % RH at Store A and 15 kWh/day per % RH at Store B. With more aggressive anti-sweat heater control, reduction factors as high as 20 kWh/day per % RH appear to be possible.« less

Airflow reduction during cold weather operation of residential heat recovery ventilators

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGugan, C.A.; Edwards, P.F.; Riley, M.A.

1987-06-01

Laboratory measurements of the performance of residential heat recovery ventilators have been carried out for the R-2000 Energy Efficient Home Program. This work was based on a preliminary test procedure developed by the Canadian Standards Association, part of which calls for testing the HRV under cold weather conditions. An environmental chamber was used to simulate outdoor conditions. Initial tests were carried out with an outdoor temperature of -20/sup 0/C; subsequent tests were carried out at a temperature of -25/sup 0/C. During the tests, airflows, temperatures, and relative humidities of airstreams entering and leaving the HRV, along with electric power inputs,more » were monitored. Frost buildup in the heat exchangers and defrost mechanisms, such as fan shutoff or recirculation, led to reductions in airflows. The magnitude of the reductions is dependent on the design of the heat exchanger and the defrost mechanism used. This paper presents the results of tests performed on a number of HRVs commercially available in Canada at the time of the testing. The flow reductions for the various defrost mechanisms are discussed.« less

Defrosting Spots

NASA Technical Reports Server (NTRS)

2005-01-01

3 October 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows dark, defrosting spots formed on a polygon-cracked plain in the south polar region of Mars. The surface was covered with carbon dioxide frost during the previous winter. In spring, the material begins to sublime away, creating a pattern of dark spots that sometimes have wind streaks emanating from them, as wind carries away or erodes the frost.

Location near: 87.2oS, 28.4oW Image width: width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Spring

Defrosting Polar Dunes--'The Snow Leopard'

NASA Technical Reports Server (NTRS)

1999-01-01

The patterns created by dark spots on defrosting south polar dunes are often strange and beautiful. This picture, which the Mars Orbiter Camera team has dubbed, 'the snow leopard,' shows a dune field located at 61.5oS, 18.9oW, as it appeared on July 1, 1999. The spots are areas where dark sand has been exposed from beneath bright frost as the south polar winter cap begins to retreat. Many of the spots have a diffuse, bright ring around them this is thought to be fresh frost that was re-precipitated after being removed from the dark spot. The spots seen on defrosting polar dunes are a new phenomenon that was not observed by previous spacecraft missions to Mars. Thus, there is much about these features that remains unknown. For example, no one yet knows why the dunes become defrosted by forming small spots that grow and grow over time. No one knows for sure if the bright rings around the dark spots are actually composed of re-precipitated frost. And no one knows for sure why some dune show spots that appear to be 'lined-up' (as they do in the picture shown here).

This Mars Global Surveyor Mars Orbiter Camera image is illuminated from the upper left. North is toward the upper right. The scale bar indicates a distance of 200 meters (656 feet).

Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

“Sapsan”-carriages defrosting station of Nizhniy Novgorod railway service enterprise and its surface waste water purification

NASA Astrophysics Data System (ADS)

Strelkov, Alexander; Teplykh, Svetlana; Gorshkalev, Pavel; Bystranova, Anastasia

2017-10-01

Surface water disposal is one of the most relevant problems for Nizhniy Novgorod railway service enterprises. Waste water must be quickly removed with special drainage devices and water drainage facilities (culverts, slope drains, pipes, ditches, etc.). During “Sapsan”-carriages defrosting watse water is aggregated on railroad tracks. It leads to track bed structure sagging, roadbed washaway and damages to point switches. In this paper the authors describe a concrete system of waste water disposal from railway service enterprises. This system is realized through culverts readjusted at the foot of ballast section. Thereafter, the collected water is pumped into a water collector and to local sewage waste-disposal plants. For railway stations with three or more tracks surface runoff diversion scheme depends on topography, railway tracks types, flow discharge and is compiled individually for each object. This paper examines “Sapsan”-carriages defrosting station of Nizhniy Novgorod railway service enterprise. It presents a technology scheme and equipment consisting of Sand catcher LOS-P, Oil catcher LOS-N, pressure-tight flotation unit; drain feed pump; solution-consuming tank of the coagulant, the solution-consuming tank of flocculant. The proposed technology has been introduced into the project practice.

[Contamination with Sphingomonas paucimobilis: about seven cases isolated in conservation and transport mediums of corneal grafts].

PubMed

Bourigault, C; Daniel, L; Jourdain, S; Hardy, E; Heriaud, K; Virmaux, M; Eniafe-Eveillard, B; Lejeune, B

2007-03-01

From September to December 2004, contaminations were found in fifteen conservation and transport mediums of corneal grafts at the tissue bank of Brest, including seven by Sphingomonas paucimobilis. The pulsed-field gel electrophoresis made it possible to establish the genotypic profiles of each strain and to compare them. Similarities were found between certain strains of the contaminated mediums and those of the thermostated double boiler of the tissue bank. The link between the contamination and the defrosting of the mediums in the double boiler was thus established. Measures of prevention are currently proposed to defrost the bottles like the use of a dry bath to replace the current one.

Defrosting Polar Dunes--"They Look Like Bushes!"

NASA Image and Video Library

2000-05-26

"They look like bushes!" That's what almost everyone says when they see the dark features found in pictures taken of sand dunes in the polar regions as they are beginning to defrost after a long, cold winter. It is hard to escape the fact that, at first glance, these images acquired by the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) over both polar regions during the spring and summer seasons, do indeed resemble aerial photographs of sand dune fields on Earth -- complete with vegetation growing on and around them! Of course, this is not what the features are, as we describe below and in related picture captions. Still, don't they look like vegetation to you? Shown here are two views of the same MGS MOC image. On the left is the full scene, on the right is an expanded view of a portion of the scene on the left. The bright, smooth surfaces that are dotted with occasional, nearly triangular dark spots are sand dunes covered by winter frost. The MGS MOC has been used over the past several months (April-August 1999) to monitor dark spots as they form and evolve on polar dune surfaces. The dark spots typically appear first along the lower margins of a dune -- similar to the position of bushes and tufts of grass that occur in and among some sand dunes on Earth. Because the martian air pressure is very low -- 100 times lower than at Sea Level on Earth -- ice on Mars does not melt and become liquid when it warms up. Instead, ice sublimes -- that is, it changes directly from solid to gas, just as "dry ice" does on Earth. As polar dunes emerge from the months-long winter night, and first become exposed to sunlight, the bright winter frost and snow begins to sublime. This process is not uniform everywhere on a dune, but begins in small spots and then over several months it spreads until the entire dune is spotted like a leopard. The early stages of the defrosting process -- as in the picture shown here -- give the impression that something is "growing" on the dunes. The sand underneath the frost is dark, just like basalt beach sand in Hawaii. Once it is exposed to sunlight, the dark sand probably absorbs sunlight and helps speed the defrosting of each sand dune. This picture was taken by MGS MOC on July 21, 1999. The dunes are located in the south polar region and are expected to be completely defrosted by November or December 1999. North is approximately up, and sunlight illuminates the scene from the upper left. The 500 meter scale bar equals 547 yards; the 300 meter scale is also 328 yards. http://photojournal.jpl.nasa.gov/catalog/PIA02300

16 CFR 1750.5 - Detailed requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... effects from spillage, cleaning, defrosting, and condensation. Devices shall be designed so that spillage... normal condensation will not so adversely affect the operation of the device as to result in its failure...

16 CFR 1750.5 - Detailed requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... effects from spillage, cleaning, defrosting, and condensation. Devices shall be designed so that spillage... normal condensation will not so adversely affect the operation of the device as to result in its failure...

16 CFR 1750.5 - Detailed requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... effects from spillage, cleaning, defrosting, and condensation. Devices shall be designed so that spillage... normal condensation will not so adversely affect the operation of the device as to result in its failure...

16 CFR § 1750.5 - Detailed requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... effects from spillage, cleaning, defrosting, and condensation. Devices shall be designed so that spillage... normal condensation will not so adversely affect the operation of the device as to result in its failure...

Alemtuzumab Injection

MedlinePlus

... poultry that has been allowed to defrost at room temperature on a counter; and meat, poultry, fish, or eggs that have not been cooked thoroughly.If you develop anemia (low red blood cell count) during your treatment, your doctor ...

Russell Crater Dunes, Defrosted

NASA Image and Video Library

2010-10-27

The Russell Crater dune field is covered seasonally by carbon dioxide frost; this image from NASA Mars Reconnaissance Orbiter shows the dune field after the frost has sublimated. There are just a few patches left of the bright seasonal frost.

Defrosting Polar Dunes--'They Look Like Bushes!'

NASA Technical Reports Server (NTRS)

1999-01-01

'They look like bushes!' That's what almost everyone says when they see the dark features found in pictures taken of sand dunes in the polar regions as they are beginning to defrost after a long, cold winter. It is hard to escape the fact that, at first glance, these images acquired by the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) over both polar regions during the spring and summer seasons, do indeed resemble aerial photographs of sand dune fields on Earth--complete with vegetation growing on and around them! Of course, this is not what the features are, as we describe below and in related picture captions. Still, don't they look like vegetation to you? Shown here are two views of the same MGS MOC image. On the left is the full scene, on the right is an expanded view of a portion of the scene on the left. The bright, smooth surfaces that are dotted with occasional, nearly triangular dark spots are sand dunes covered by winter frost.

The MGS MOC has been used over the past several months (April-August 1999) to monitor dark spots as they form and evolve on polar dune surfaces. The dark spots typically appear first along the lower margins of a dune--similar to the position of bushes and tufts of grass that occur in and among some sand dunes on Earth.

Because the martian air pressure is very low--100 times lower than at Sea Level on Earth--ice on Mars does not melt and become liquid when it warms up. Instead, ice sublimes--that is, it changes directly from solid to gas, just as 'dry ice' does on Earth. As polar dunes emerge from the months-long winter night, and first become exposed to sunlight, the bright winter frost and snow begins to sublime. This process is not uniform everywhere on a dune, but begins in small spots and then over several months it spreads until the entire dune is spotted like a leopard.

The early stages of the defrosting process--as in the picture shown here--give the impression that something is 'growing' on the dunes. The sand underneath the frost is dark, just like basalt beach sand in Hawaii. Once it is exposed to sunlight, the dark sand probably absorbs sunlight and helps speed the defrosting of each sand dune.

This picture was taken by MGS MOC on July 21, 1999. The dunes are located in the south polar region and are expected to be completely defrosted by November or December 1999. North is approximately up, and sunlight illuminates the scene from the upper left. The 500 meter scale bar equals 547 yards; the 300 meter scale is also 328 yards.

Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

Hydrophobic durability characteristics of butterfly wing surface after freezing cycles towards the design of nature inspired anti-icing surfaces

PubMed Central

Choy, Kwang-Leong

2018-01-01

The hydrophobicity and anti-icing performance of the surfaces of some artificial hydrophobic coatings degraded after several icing and de-icing cycles. In this paper, the frost formation on the surfaces of butterfly wings from ten different species was observed, and the contact angles were measured after 0 to 6 frosting/defrosting cycles. The results show that no obvious changes in contact angle for the butterfly wing specimens were not obvious during the frosting/defrosting process. Further, the conclusion was inferred that the topography of the butterfly wing surface forms a special space structure which has a larger space inside that can accommodate more frozen droplets; this behavior prevents destruction of the structure. The findings of this study may provide a basis and new concepts for the design of novel industrially important surfaces to inhibit frost/ice growth, such as durable anti-icing coatings, which may decrease or prevent the socio-economic loss. PMID:29385390

Hydrophobic durability characteristics of butterfly wing surface after freezing cycles towards the design of nature inspired anti-icing surfaces.

PubMed

Chen, Tingkun; Cong, Qian; Qi, Yingchun; Jin, Jingfu; Choy, Kwang-Leong

2018-01-01

The hydrophobicity and anti-icing performance of the surfaces of some artificial hydrophobic coatings degraded after several icing and de-icing cycles. In this paper, the frost formation on the surfaces of butterfly wings from ten different species was observed, and the contact angles were measured after 0 to 6 frosting/defrosting cycles. The results show that no obvious changes in contact angle for the butterfly wing specimens were not obvious during the frosting/defrosting process. Further, the conclusion was inferred that the topography of the butterfly wing surface forms a special space structure which has a larger space inside that can accommodate more frozen droplets; this behavior prevents destruction of the structure. The findings of this study may provide a basis and new concepts for the design of novel industrially important surfaces to inhibit frost/ice growth, such as durable anti-icing coatings, which may decrease or prevent the socio-economic loss.

Olive oil enriched in lycopene from tomato by-product through a co-milling process.

PubMed

Bendini, Alessandra; Di Lecce, Giuseppe; Valli, Enrico; Barbieri, Sara; Tesini, Federica; Toschi, Tullia Gallina

2015-01-01

The aim of this investigation was to produce an olive oil (OO) naturally enriched with antioxidants, recovering carotenoids, in particular lycopene, using an industrial by-product of tomato seeds and skin. For this purpose, a technological process in a low-scale industrial plant to co-mill olives and tomato by-product in de-frosted or freeze-dried forms was applied and studied with respect to control samples. Preliminary results obtained from two different experiments were carried out by 40 kg of cultivar Correggiolo olives and 60 kg of olive blends from different cultivars. In both the experiments, the co-milling showed significant enrichment in carotenoids, especially in lycopene (mean values of 5.4 and 7.2 mg/kg oil from defrosted and freeze-dried by-products, respectively). The experimental results demonstrated the possibility to obtain a new functional food naturally enriched in antioxidant compounds, which might be marketed as "OO dressing enriched in lycopene" or "condiment produced using olives and tomato by-product".

EXPERIMENTAL INVESTIGATION OF DEFROST USING WARM LIQUID REFRIGERANT

EPA Science Inventory

This paper reports the results from laboratory tests of a low-temperature supermarket refrigeration system with two open and two reach-in display cases. Tests were performed at condensing temperatures ranging from 10 to 40 C and at an evaporating temperature of -34 C. The perfo...

16 CFR Appendix B1 to Part 305 - Upright Freezers With Manual Defrost

Code of Federal Regulations, 2012 CFR

2012-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix A1 to Part 305 - Refrigerators With Automatic Defrost

Code of Federal Regulations, 2010 CFR

2010-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B2 to Part 305 - Upright Freezers With Automatic Defrost

Code of Federal Regulations, 2012 CFR

2012-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix A1 to Part 305 - Refrigerators With Automatic Defrost

Code of Federal Regulations, 2012 CFR

2012-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix A1 to Part 305 - Refrigerators With Automatic Defrost

Code of Federal Regulations, 2011 CFR

2011-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B2 to Part 305 - Upright Freezers With Automatic Defrost

Code of Federal Regulations, 2013 CFR

2013-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B1 to Part 305 - Upright Freezers With Manual Defrost

Code of Federal Regulations, 2013 CFR

2013-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B2 to Part 305 - Upright Freezers With Automatic Defrost

Code of Federal Regulations, 2011 CFR

2011-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B1 to Part 305 - Upright Freezers With Manual Defrost

Code of Federal Regulations, 2010 CFR

2010-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B1 to Part 305 - Upright Freezers With Manual Defrost

Code of Federal Regulations, 2011 CFR

2011-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix A1 to Part 305 - Refrigerators With Automatic Defrost

Code of Federal Regulations, 2013 CFR

2013-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

16 CFR Appendix B2 to Part 305 - Upright Freezers With Automatic Defrost

Code of Federal Regulations, 2010 CFR

2010-01-01

... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... (*) (*) (*) No data submitted for units meeting the Department of Energy's Energy Conservation Standards...

7 CFR 70.105 - Procedures for appeal gradings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conducting the appeal grading. Whether defrosting poultry or rabbit carcasses for other types of appeals will... 7 Agriculture 3 2010-01-01 2010-01-01 false Procedures for appeal gradings. 70.105 Section 70.105... PRODUCTS AND RABBIT PRODUCTS Grading of Poultry Products and Rabbit Products Appeal of A Grading Or...

40 CFR 449.2 - General definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... aircraft. This includes deicing and anti-icing fluids. Airfield pavement means all paved surfaces on the... defrosting or deicing for safe taxiing. Centralized deicing pad means a facility on an airfield designed for... remove or prevent any accumulation of snow or ice on: (1) An aircraft; or (2) Airfield pavement. Deicing...

40 CFR 449.2 - General definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... aircraft. This includes deicing and anti-icing fluids. Airfield pavement means all paved surfaces on the... defrosting or deicing for safe taxiing. Centralized deicing pad means a facility on an airfield designed for... remove or prevent any accumulation of snow or ice on: (1) An aircraft; or (2) Airfield pavement. Deicing...

40 CFR 449.2 - General definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... aircraft. This includes deicing and anti-icing fluids. Airfield pavement means all paved surfaces on the... defrosting or deicing for safe taxiing. Centralized deicing pad means a facility on an airfield designed for... remove or prevent any accumulation of snow or ice on: (1) An aircraft; or (2) Airfield pavement. Deicing...

16 CFR Appendix A2 to Part 305 - Refrigerators and Refrigerators-Freezers With Manual Defrost

Code of Federal Regulations, 2012 CFR

2012-01-01

... REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION... for units meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72...

16 CFR Appendix A2 to Part 305 - Refrigerators and Refrigerators-Freezers With Manual Defrost

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION... for units meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72...

16 CFR Appendix A2 to Part 305 - Refrigerators and Refrigerators-Freezers With Manual Defrost

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION... for units meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72...

16 CFR Appendix A2 to Part 305 - Refrigerators and Refrigerators-Freezers With Manual Defrost

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION... for units meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72...

9 CFR 590.539 - Defrosting operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 590.539 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG... objectionable odors and are unfit for human food (e.g., sour, musty, fermented, or decomposed odors) shall be... container. (1) Frozen eggs packed in metal or plastic containers may be placed in running tap water (70 F...

9 CFR 590.539 - Defrosting operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 590.539 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG... objectionable odors and are unfit for human food (e.g., sour, musty, fermented, or decomposed odors) shall be... container. (1) Frozen eggs packed in metal or plastic containers may be placed in running tap water (70 F...

9 CFR 590.539 - Defrosting operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 590.539 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG... objectionable odors and are unfit for human food (e.g., sour, musty, fermented, or decomposed odors) shall be... container. (1) Frozen eggs packed in metal or plastic containers may be placed in running tap water (70 F...

9 CFR 590.539 - Defrosting operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 590.539 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG... objectionable odors and are unfit for human food (e.g., sour, musty, fermented, or decomposed odors) shall be... container. (1) Frozen eggs packed in metal or plastic containers may be placed in running tap water (70 F...

Sustainability Logistics Basing Science and Technology Objective. Demonstration #1 - 1000 Person Camp Demo

DTIC Science & Technology

2016-09-01

DP2 Solar Array .............................................................................................................. 7  Figure 6: Current...Internal Temperatures During Defrost ........................................................ 80  Figure 97: Solar Measurements Above and Underneath the DP2...with renewable energy sources such as solar photovoltaics. It includes an on- board generator set for backup power or for operation while mobile

16 CFR Appendix A3 to Part 305 - Refrigerator-Freezers With Partial Automatic Defrost

Code of Federal Regulations, 2010 CFR

2010-01-01

... SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE... meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72 FR 49975, Aug...

16 CFR Appendix A3 to Part 305 - Refrigerator-Freezers With Partial Automatic Defrost

Code of Federal Regulations, 2011 CFR

2011-01-01

... SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE... meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72 FR 49975, Aug...

16 CFR Appendix A3 to Part 305 - Refrigerator-Freezers With Partial Automatic Defrost

Code of Federal Regulations, 2013 CFR

2013-01-01

... SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE... meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72 FR 49975, Aug...

16 CFR Appendix A3 to Part 305 - Refrigerator-Freezers With Partial Automatic Defrost

Code of Federal Regulations, 2012 CFR

2012-01-01

... SPECIFIC ACTS OF CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE... meeting the Department of Energy's Energy Conservation Standards effective July 1, 2001. [72 FR 49975, Aug...

77 FR 46803 - Notice of Receipt of Petition for Decision That Nonconforming 2005 Chevrolet Suburban Multi...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-06

... Transmission Braking Effect, 103 Windshield Defrosting and Defogging Systems, 104 Windshield Wiping and Washing..., 113 Hood Latch System, 114 Theft Protection, 116 Motor Vehicle Brake Fluids, Standard No. 118 Power-Operated Window, Partition, and Roof Panel Systems, 119 New Pneumatic Tires for Vehicles other than...

49 CFR 571.103 - Standard No. 103; Windshield defrosting and defogging systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... concrete pavement (or other surface with equivalent coefficient of surface friction) at a specified speed... defogging system which operates either by applying heat to the windshield or by dehumidifying the air inside... equipped with a heating system other than a heat exchanger type that uses the engine's coolant as a means...

49 CFR 571.103 - Standard No. 103; Windshield defrosting and defogging systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... concrete pavement (or other surface with equivalent coefficient of surface friction) at a specified speed... defogging system which operates either by applying heat to the windshield or by dehumidifying the air inside... equipped with a heating system other than a heat exchanger type that uses the engine's coolant as a means...

49 CFR 571.103 - Standard No. 103; Windshield defrosting and defogging systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... concrete pavement (or other surface with equivalent coefficient of surface friction) at a specified speed... defogging system which operates either by applying heat to the windshield or by dehumidifying the air inside... equipped with a heating system other than a heat exchanger type that uses the engine's coolant as a means...

Joule-Thomson valves for long term service in space cryocoolers

NASA Technical Reports Server (NTRS)

Lester, J. M.; Benedict, B.

1985-01-01

Joule-Thomson valves for small cryocoolers have throttling passages on the order of 0.1 millimeter in diameter. Consequently, they can become plugged easily and stop the operation of the cooler. Plugging can be caused by solid particles, liquids or gases. Plugging is usually caused by the freezing of contaminant gases from the process stream. In small open loop coolers and in closed loop coolers where periodic maintenance is allowed, the problem is overcome by using careful assembly techniques, pure process gases, warm filters and cold adsorbers. A more thorough approach is required for closed loop cryocoolers which must operate unattended for long periods. This paper presents the results of an effort to solve this problem. The causes of plugging are examined, and various ways to eliminate plugging are discussed. Finally, the development of a J-T defroster is explained. It is concluded that a combination of preventive measures and a defroster will reduce the chance of cooler failure by plugging to such a degree that J-T coolers can be used for long term space missions.

[The effect of long-term preservation of microbial cells immobilized in poly(vinyl alcohol) cryogel on their viability and biosynthesis of target metabolites].

PubMed

Efremenko, E N; Tatarinova, N Iu

2007-01-01

The effect of cell storage at -18 degrees C for 18-24 months on reproductive capacity was investigated for various microorganisms (gram-positive and gram-negative bacteria, yeasts, and filamentous fungi) immobilized in poly(vinyl alcohol) cryogel. To examine the viability of immobilized cells after defrosting, the bioluminescent method of intracellular ATP determination was used. A high level of metabolic activity of immobilized cells after various periods of storage was recorded for Streptomyces anulatus, Rhizopus orvzae, and Escherichia coli, which are producers of the antibiotic aurantin, L(+)-lactic acid, and the recombinant enzyme organophosphate hydrolase, respectively. It was shown that the initial concentration of immobilized cells in cryogel granules plays an important role in the survival of Str. anulatus and Pseudomonas putida after 1.5 years of storage. It was found that, after slow defrosting in the storage medium at 50C for 18 h of immobilized cells of the yeast Saccharomvces cerevisiae that had been stored for nine months, the number of reproductive cells increased due to the formation of ascospores.

Microwave heating inactivates Shiga Toxin (Stx2) in reconstituted fat-free Milk and adversely affects the nutritional value of cell culture medium

USDA-ARS?s Scientific Manuscript database

Microwave exposure is a convenient and widely used method for defrosting, heating, and cooking numerous foods. Microwave cooking is also reported to kill pathogenic microorganisms that often contaminate food. Microwaves act by causing polar molecules in food, such as water, to rapidly rotate, thus...

49 CFR 571.103 - Standard No. 103; Windshield defrosting and defogging systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... concrete pavement (or other surface with equivalent coefficient of surface friction) at a specified speed... defogging system which operates either by applying heat to the windshield or by dehumidifying the air inside... system other than a heat exchanger type that uses the engine's coolant as a means to supply the heat to...

49 CFR 571.103 - Standard No. 103; Windshield defrosting and defogging systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... concrete pavement (or other surface with equivalent coefficient of surface friction) at a specified speed... defogging system which operates either by applying heat to the windshield or by dehumidifying the air inside... system other than a heat exchanger type that uses the engine's coolant as a means to supply the heat to...

10 CFR Appendix B1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Freezers

Code of Federal Regulations, 2011 CFR

2011-01-01

... defrost control. The energy consumption in kilowatt-hours per day shall be calculated equivalent to: ET... though the consumer-activated compartment temperature controls were preset so that the desired... calculated effect of operating a freezer for a period of 24 hours with the consumer-activated controls other...

40 CFR 1066.710 - Cold temperature testing procedures for measuring CO and NMHC emissions and determining fuel...

Code of Federal Regulations, 2014 CFR

2014-07-01

... climate control system with the heat on and set to primarily defrost the front window. Turn air.... (i) Prior to the first acceleration, 20 seconds after the start of the UDDS, set the climate control... climate control system): (A) Temperature. Set controls to maximum heat. (B) Fan speed. Set the fan speed...

Comparison of freezing control strategies for residential air-to-air heat recovery ventilators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, E.G.; Bradley, L.C.; Chant, R.E.

1989-01-01

A comparison of the energy performance of defrost and frost control strategies for residential air-to-air heat recovery ventilators (HRV) has been carried out by using computer simulations for various climatic conditions. This paper discusses the results and conclusions from the comparisons and their implications for the heat recovery ventilator manufacturers and system designers.

Liquid-Nitrogen Test for Blocked Tubes

NASA Technical Reports Server (NTRS)

Wagner, W. R.

1984-01-01

Nondestructive test identifies obstructed tube in array of parallel tubes. Trickle of liquid nitrogen allowed to flow through tube array until array accumulates substantial formation of frost from moisture in air. Flow stopped and warm air introduced into inlet manifold to heat tubes in array. Tubes still frosted after others defrosted identified as obstructed tubes. Applications include inspection of flow systems having parallel legs.

10 CFR Appendix A to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Electric Refrigerators and Electric...

Code of Federal Regulations, 2011 CFR

2011-01-01

... the test for a unit having no defrost provisions (section 4.1). The second part is designed to capture... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption... Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test...

77 FR 75426 - Decision and Order Granting a Waiver to GE Appliances From the Department of Energy Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-20

... alternate test procedures. 10 CFR 430.27(l). Waivers remain in effect pursuant to the provisions of 10 CFR... for products that employ these long-time or variable defrost control strategies, DOE is granting GE's... representations about the energy use of its refrigerator-freezer products for compliance, marketing, or other...

Automotive Airbag Safety Enhancement Final Report CRADA No. TSB-1165-95

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cutting, Jack; Durrell, Robert

The Vehicle Safety systems (VSS) Division of Quantic Industries, Inc. (QII) manufactured automotive airbag components. When both the driver and the passenger side airbags inflated in a tightly sealed passenger compartment, the compression of the surrounding air could and, in some instances, would cause damage to the eardrums of the occupants. The Aerospace and Division (ADD) of QII had partially developed the technology to fracture the canopy of a jet aircraft at the time of pilot ejection. The technical problem was how to adapt the canopy fracturing technology to the rear window of a motor vehicle in a safe andmore » cost effective manner. The existing approach was to replace the embedded rear window defroster with a series-parallel network of exploding bridge wires (EBWs). This would still provide the defrost function at low voltage/ current, but would cause fracturing of the window when a high current/voltage pulse was applied without pyrotechnics or explosives. The elements of this system were the embedded EBW network and a trunk-mounted fireset. The fireset would store the required energy to fire the network upon the receipt of a trigger signal from the existing air bag crash sensor.« less

Defrosting the digital library: bibliographic tools for the next generation web.

PubMed

Hull, Duncan; Pettifer, Steve R; Kell, Douglas B

2008-10-01

Many scientists now manage the bulk of their bibliographic information electronically, thereby organizing their publications and citation material from digital libraries. However, a library has been described as "thought in cold storage," and unfortunately many digital libraries can be cold, impersonal, isolated, and inaccessible places. In this Review, we discuss the current chilly state of digital libraries for the computational biologist, including PubMed, IEEE Xplore, the ACM digital library, ISI Web of Knowledge, Scopus, Citeseer, arXiv, DBLP, and Google Scholar. We illustrate the current process of using these libraries with a typical workflow, and highlight problems with managing data and metadata using URIs. We then examine a range of new applications such as Zotero, Mendeley, Mekentosj Papers, MyNCBI, CiteULike, Connotea, and HubMed that exploit the Web to make these digital libraries more personal, sociable, integrated, and accessible places. We conclude with how these applications may begin to help achieve a digital defrost, and discuss some of the issues that will help or hinder this in terms of making libraries on the Web warmer places in the future, becoming resources that are considerably more useful to both humans and machines.

Defrosting the Digital Library: Bibliographic Tools for the Next Generation Web

PubMed Central

Hull, Duncan; Pettifer, Steve R.; Kell, Douglas B.

2008-01-01

Many scientists now manage the bulk of their bibliographic information electronically, thereby organizing their publications and citation material from digital libraries. However, a library has been described as “thought in cold storage,” and unfortunately many digital libraries can be cold, impersonal, isolated, and inaccessible places. In this Review, we discuss the current chilly state of digital libraries for the computational biologist, including PubMed, IEEE Xplore, the ACM digital library, ISI Web of Knowledge, Scopus, Citeseer, arXiv, DBLP, and Google Scholar. We illustrate the current process of using these libraries with a typical workflow, and highlight problems with managing data and metadata using URIs. We then examine a range of new applications such as Zotero, Mendeley, Mekentosj Papers, MyNCBI, CiteULike, Connotea, and HubMed that exploit the Web to make these digital libraries more personal, sociable, integrated, and accessible places. We conclude with how these applications may begin to help achieve a digital defrost, and discuss some of the issues that will help or hinder this in terms of making libraries on the Web warmer places in the future, becoming resources that are considerably more useful to both humans and machines. PMID:18974831

Defrosting Polar Dunes--Dark Spots and Wind Streaks

NASA Technical Reports Server (NTRS)

1999-01-01

The first time that the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC)team saw dark spots on defrosting dune surfaces was in August and September of 1998. At that time, it was the north polar seasonal frost cap that was subliming away (more recent images from 1999 have shown the south polar frosts). This picture (above) shows a small portion of the giant dune field that surrounds the north polar region, as it appeared on August 23, 1998. At the time, it was early northern spring and the dunes were still covered with winter frost.

Dark spots had appeared on the north polar dunes, and many of them exhibited a radial or semi-radial pattern of dark streaks and streamers. At first, there was speculation that the streaks indicated that the defrosting process might somehow involve explosions! The dark spots seemed to resemble small craters with dark, radial ejecta. It seemed possible that frozen carbon dioxide trapped beneath water ice might somehow heat up, turn to gas, expand, and then 'explode' in either a small blast or at least a 'puff' of air similar to that which comes from the blowhole of a surfacing whale or seal.

The image shown here changed the earlier impression. The dark spots and streaks do not result from explosions. The spots--though not well understood--represent the earliest stages of defrosting on the sand dunes. The streaks, instead of being caused by small explosions, are instead the result of wind. In this picture, the fine, dark streaks show essentially identical orientations from spot to spot (e.g., compare the spots seen in boxes (a) and (b)). Each ray of dark material must result from wind blowing from a particular direction--for example, all of the spots in this picture exhibit a ray that points toward the upper left corner of the image, and each of these rays indicates the same wind regime. Each spot also has a ray pointing toward the lower right and top/upper-right. These, too, must indicate periods when the wind was strong enough to move materials, consistently, in only one direction.

The sand that makes up the north polar dunes is dark. Each spot and streak is composed of the dune sand. The bright surfaces are all covered with frost. This picture is located near 76.9oN, 271.2oW, in the north polar sand sea. Illumination is from the lower left. The 200 meter scale also indicates a distance of 656 feet.

Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

Temperature-controlled transparent-film heater based on silver nanowire-PMMA composite film

NASA Astrophysics Data System (ADS)

He, Xin; Liu, A.'lei; Hu, Xuyang; Song, Mingxia; Duan, Feng; Lan, Qiuming; Xiao, Jundong; Liu, Junyan; Zhang, Mei; Chen, Yeqing; Zeng, Qingguang

2016-11-01

We fabricated a high-performance film heater based on a silver nanowire and polymethyl methacrylate (Ag NW-PMMA) composite film, which was synthesized with the assistance of mechanical lamination and an in situ transfer method. The films exhibit excellent conductivity, high figure of merit, and strong adhesion of percolation network to substrate. By controlling NW density, we prepared the films with a transmittance of 44.9-85.0% at 550 nm and a sheet resistance of 0.13-1.40 Ω sq-1. A stable temperature ranging from 130 °C-40 °C was generated at 3.0 V within 10-30 s, indicating that the resulting film heaters show a rapid thermal response, low driving voltage and stable temperature recoverability. Furthermore, we demonstrated the applications of the film heater in defrosting and a physical therapeutic instrument. A fast defrosting on the composite film with a transmittance of 88% was observed by applying a 9 V driving voltage for 20 s. Meanwhile, we developed a physical therapeutic instrument with two modes of thermotherapy and electronic-pulse massage by using the composite films as two electrodes, greatly decreasing the weight and power consumption compared to a traditional instrument. Therefore, Ag NW-PMMA film can be a promising candidate for diversified heating applications.

10 CFR Appendix A1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Electric Refrigerators and Electric...

Code of Federal Regulations, 2010 CFR

2010-01-01

... freezer compartment volume as defined in HRF-1-1979, in cubic feet. 1.3“Anti-sweat heater” means a device... operating characteristics. 1.7“Standard cycle” means the cycle type in which the anti-sweat heater control... unit under test. Defrost controls are to be operative and the anti-sweat heater switch is to be “on...

Self-defrosting recuperative air-to-air heat exchanger

DOEpatents

Drake, Richard L.

1993-01-01

A heat exchanger includes a stationary spirally or concentrically wound heat exchanger core with rotating baffles on upper and lower ends thereof. The rotating baffles include rotating inlets and outlets which are in communication with respective fixed inlets and outlets via annuli. The rotation of the baffles causes a concurrent rotation of the temperature distribution within the stationary exchanger core, thereby preventing frost build-up in some applications and preventing the formation of hot spots in other applications.

Effect of filtered wood smoke treatment on chemical and microbial changes in mahi mahi fillets.

PubMed

Kristinsson, Hordur G; Danyali, Nineveh; Ua-Angkoon, Siriporn

2007-01-01

A study was performed to investigate the effect of filtered wood smoke processing on quality and safety of mahi mahi compared to no treatment. Skinless mahi mahi fillet portions were either treated with filtered smoke (FS) or left untreated for 24 h, followed by either (a) aerobic storage at 4 degrees C for 8 d or (b) freezing for 30 d (-25 degrees C) followed by thawing and aerobic storage at 4 degrees C for 8 d. Results show that treating mahi mahi fillets with FS increased (P < 0.05) a* values (redness) of the muscle and stabilized it during frozen storage. The redness did, however, decay (P < 0.05) rapidly on cold storage for both defrosted and fresh filtered-smoke-treated products, and reached initial (presmoking) redness levels in 2 d. The FS process overall significantly (P < 0.05) improved microbial stability of the product. Stability toward lipid oxidation was also significantly (P < 0.05) increased for the FS products compared to untreated products, particularly after defrosting. Sensory studies supported the microbial and lipid oxidation findings, showing that products treated with FS were better accepted and had increased (P < 0.05) shelf life over the untreated products. The shelf life was, however, compromised when microbial levels increased; that is, the process did not mask microbial spoilage; the spoilage did become evident in the sensory trials.

Self-defrosting recuperative air-to-air heat exchanger

DOEpatents

Drake, R.L.

1993-12-28

A heat exchanger is described which includes a stationary spirally or concentrically wound heat exchanger core with rotating baffles on upper and lower ends thereof. The rotating baffles include rotating inlets and outlets which are in communication with respective fixed inlets and outlets via annuli. The rotation of the baffles causes a concurrent rotation of the temperature distribution within the stationary exchanger core, thereby preventing frost build-up in some applications and preventing the formation of hot spots in other applications. 3 figures.

Humidification of unwrapped chilled meat on retail display using an ultrasonic fogging system.

PubMed

Brown, Tim; Corry, Janet E L; Evans, Judith A

2007-12-01

The effects of an ultrasonic humidification system on unwrapped meat in a chilled retail display cabinet were assessed. Humidification raised the relative humidity of the cabinet air from a mean of 76.7% to just below saturation at 98.8%. This reduced the mean evaporative weight loss from whole samples of meat after 14h from 1.68% to 0.62% of their initial weight. The rate of deterioration in the appearance of the meat due to dehydration was reduced to the extent that while the unhumidified trial was terminated after 14h because all samples were judged to be unacceptable, the humidified trial was continued for 24h without any major changes in appearance. Levels of presumptive pseudomonas bacteria were relatively high in water samples taken from the humidification system and defrost water during the humidified trial, but Legionella spp. were not isolated. Significant increases in the numbers of bacteria on the meat during either trial were only found in one case, that of humidified minced beef. However, some of the samples had high counts even before display, and this may have masked any effect due to humidification. Differences in levels of air-borne contamination were small and inconsistent. Air temperatures were raised by humidification by between 1 and 2°C and this was reflected in similarly raised product temperatures. Temperatures of air leaving the evaporator indicated that this was due to icing of the evaporator in the periods leading up to defrosts.

Analysis of the energy efficiency of the implementation power electric generated modules in the CHS

NASA Astrophysics Data System (ADS)

Sukhikh, A. A.; Milyutin, V. A.; Lvova, A. M.

2017-11-01

Application on the Central heat source (CHS) local generation of electricity is primarily aimed at solving problems of own needs of electric energy that not only guarantees the independence of the work of the CHS from external electrical networks, but will prevent the stop of heat supply of consumers and defrosting heating networks in case of accidents in electrical networks caused by natural or anthropogenic factors. Open the prospects of electric power supply stand-alone objects, such commercial or industrial objects on the territory of a particular neighborhood.

Combating Frosting with Joule-Heated Liquid-Infused Superhydrophobic Coatings.

PubMed

Elsharkawy, Mohamed; Tortorella, Domenico; Kapatral, Shreyas; Megaridis, Constantine M

2016-05-03

Frost formation is omnipresent when suitable environmental conditions are met. A good portion of research on combating frost formation has revolved around the passive properties of superhydrophobic (SHPO) and slippery lubricant-impregnated porous (SLIP) surfaces. Despite much progress, the need for surfaces that can effectively combat frost formation over prolonged periods still remains. In this work, we report, for the first time, the use of electrically conductive SHPO/SLIP surfaces for active mitigation of frost formation. First, we demonstrate the failure of these surfaces to passively avert prolonged (several hours) frosting. Next, we make use of their electroconductive property for active Joule heating, which results in the removal of any formed frost. We study the role of the impregnating lubricant in the heat transfer across the interface, the surface, and the ambient. We show that, even though the thermal properties of the impregnating lubricant may vary drastically, the lubricant type does not noticeably affect the defrosting behavior of the surface. We attribute this outcome to the dominant thermal resistance of the thick frost layer formed on the cooled surface. We support this claim by drawing parallels between the present system and heat transfer through a one-dimensional (1D) composite medium, and solving the appropriate transient transport equations. Lastly, we propose periodic thermal defrosting for averting frost formation altogether. This methodology utilizes the coating's passive repellent capabilities, while eliminating the dominant effect of thick deposited frost layers. The periodic heating approach takes advantage of lubricants with higher thermal conductivities, which effectively enhance heat transfer through the porous multiphase surface that forms the first line of defense against frosting.

Tunical Outer Layer Plays an Essential Role in Penile Veno-occlusive Mechanism Evidenced from Electrocautery Effects to the Corpora Cavernosa in Defrosted Human Cadavers.

PubMed

Hsieh, Cheng-Hsing; Huang, Yi-Ping; Tsai, Mang-Hung; Chen, Heng-Shen; Huang, Po-Cheng; Lin, Chung-Wu; Hsu, Geng-Long

2015-12-01

To determine the exact anatomical structure for establishing penile veno-occlusive function, we sought to conduct a hemodynamic study on defrosted human cadavers. Thirteen penises were used for this experiment, and 11 intact penises were allocated into the electrocautery group (EG, n = 6) and the ligation group (LG, n = 5). A circumcision was made on the penis to access the veins. Two #19 scalp needles were fixed in the 3 and 9 o'clock positions in the distal penis for colloid infusion and intracavernous pressure (ICP) monitoring, respectively. For the EG, the deep dorsal vein and cavernosal vein trunks were freed for 3-5 cm where at least 3 emissary veins were identified via opening Buck's fascia; these veins underwent electrocautery at 45 watts, while the ICP was maintained at 0, 50, 75, 100, 125, and 150 mmHg, respectively. For control, venous ligation was made but at the ICP of 150 mmHg. A tissue block including the emissary vein was then obtained for histological analysis. Except all in the EG and those whose ICP exceed 125 mmHg in the EG, the sinusoids of the corpora cavernosa sustained varied fulgurated fibrosis in every specimen and the severity appeared reversely commensurate with the ICP regarding sinusoidal clumping and darkish bands (P <.02 and .01 respectively). We conclude that the tunica albuginea can prevent the electrocautery damage to intracavernous sinusoids once the ICP reached a level corresponding to a rigid erection. The outer tunica plays an essential role in fulfilling the veno-occlusive mechanism. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Refrigerated Warehouse Demand Response Strategy Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scott, Doug; Castillo, Rafael; Larson, Kyle

This guide summarizes demand response measures that can be implemented in refrigerated warehouses. In an appendix, it also addresses related energy efficiency opportunities. Reducing overall grid demand during peak periods and energy consumption has benefits for facility operators, grid operators, utility companies, and society. State wide demand response potential for the refrigerated warehouse sector in California is estimated to be over 22.1 Megawatts. Two categories of demand response strategies are described in this guide: load shifting and load shedding. Load shifting can be accomplished via pre-cooling, capacity limiting, and battery charger load management. Load shedding can be achieved by lightingmore » reduction, demand defrost and defrost termination, infiltration reduction, and shutting down miscellaneous equipment. Estimation of the costs and benefits of demand response participation yields simple payback periods of 2-4 years. To improve demand response performance, it’s suggested to install air curtains and another form of infiltration barrier, such as a rollup door, for the passageways. Further modifications to increase efficiency of the refrigeration unit are also analyzed. A larger condenser can maintain the minimum saturated condensing temperature (SCT) for more hours of the day. Lowering the SCT reduces the compressor lift, which results in an overall increase in refrigeration system capacity and energy efficiency. Another way of saving energy in refrigerated warehouses is eliminating the use of under-floor resistance heaters. A more energy efficient alternative to resistance heaters is to utilize the heat that is being rejected from the condenser through a heat exchanger. These energy efficiency measures improve efficiency either by reducing the required electric energy input for the refrigeration system, by helping to curtail the refrigeration load on the system, or by reducing both the load and required energy input.« less

Polygons in Seasonal Frost

NASA Technical Reports Server (NTRS)

2004-01-01

8 February 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a summertime scene in the south polar region of the red planet. A patch of bright frost--possibly water ice--is seen in the lower third of the image. Polygon patterns that have developed in the ice as it sublimes away can be seen; these are not evident in the defrosted surfaces, so they are thought to have formed in the frost. This image is located near 82.6oS, 352.5oW. Sunlight illuminates this scene from the upper left; the image covers an area 3 km (1.9 mi) wide.

Transparent and flexible heaters based on Al:ZnO degenerate semiconductor

NASA Astrophysics Data System (ADS)

Roul, Monee K.; Obasogie, Brandon; Kogo, Gilbert; Skuza, J. R.; Mundle, R. M.; Pradhan, A. K.

2017-10-01

We report on high performance transparent Al:ZnO (AZO) thin film heaters on flexible polymer (polyethylene terephthalate) and glass substrates which demonstrate low sheet resistivity. AZO thin films were grown by radio-frequency magnetron sputtering at low Ts (below 200 °C) on flexible, transparent polyethylene terephthalate substrates that show stable and reproducible results by applying low (<10 V) voltages. This study also examined identical AZO thin films on glass substrates that showed highly reproducible heating effects due to the Joule heating effect. The potential applications are foldable and wearable electronics, pain/injury therapy smart windows, automobile window defrosters, and low-cost power electronics.

Proposal for mars express: detailed dds-test in the "inca city" and "csontváry" areas

NASA Astrophysics Data System (ADS)

Horvath, A.; Manrubia, S. C.; Ganti, T.; Berczi, S.; Gesztesi, A.; Fernandez-Remolar, D.; Prieto Ballesteros, O.; Szathmary, E.

2003-04-01

Analyis of Mars Global Surveyor MOC images taken in Martian winter and spring has revealed a peculiar spotting phenomenon on the dark dunes in the polar region of Mars [1]. These spots are named Dark Dune Spots (DDSs) and various hypotheses have been put forward for their origin and formation process, which fall into two main groups: geophysical and biological [2, 3, 4, 5 and 6]. Because the high-resolution images by MGS-MOC have shown well-developed and recurrent DDSs on some dark dune fields since the Southern winter of 1999 [5, 6 and 7], we have selected two areas of them. They are many dozen kilometers in size in the Southern polar region. Namely: the "Inca City" area (λ=295.3^oE, ϕ=81.5^oS) and the Northern part of Pityusa Patera (λ=37^oE, ϕ=66^oS), which we call "Csontváry" area. These two areas could be excellent test areas for Mars Express in order to reveal the mechanism of the formation, development and annual recurrence of the DDSs. For this we propose, that different instruments (HRSC, spectrometers, etc.) of the orbiter of the ESA Mars Express Mission should produce high-resolution images and spectral measurements of the frosted surface of the dark dunes of the "Inca City" and the Pityusa Patera from the second half of the Southern winter till the end of spring, with weekly regularity, because this may be sufficient to choose between the abiogenic and the biogenic origin of DDSs. Referenes [1] Malin, M. C. and Edgett, K. S.: 2000, Frosting and defrosting of Martian polar dunes, LPS XXXI, #1056, Houston-CD. [2] Horváth, A., Gánti, T., Gesztesi, A., Bérczi, Sz., Szathmáry, E., 2001, Probable evidences of recent biological activity on Mars: appearance and growing of dark dune spots in the south polar region. LPS XXXII, # 1543, Houston-CD. [3] Malin, M. C. and Edgett, K. S.: 2001, The Mars Global Surveyor Mars Orbiter Camera: Interplanetary Cruise through Primary Mission. J. Geophys. Res. 106 E10, p. 23,429-23,570. [4] Gánti, T., Horváth, A., Gesztesi, A., Bérczi, Sz., Szathmáry E.: 2002, Defrosting and Melting, not Defrosting Alone, Lunar Planetary Science XXXIII, #1221, Houston-CD. [5] Horváth, A., Bérczi, Sz., Gánti, T., Gesztesi, A., Szathmáry E.: 2002, The “Inca City” Region of Mars: Test field for Dark Dune Spots Origin, LPS XXXIII, #1109, Houston-CD. [6] Gánti, T., Horváth, A., Gesztesi, A., Bérczi, Sz., Szathmáry, E., 2003, Dark dune spots: possible biomarkers on Mars? OLEB in print. [7] Horváth, A., Gánti, T., Bérczi, Sz., Gesztesi, A., Szathmáry, E., 2003, Morphological analysis of annual recurrence of dark dune spots on Southern Polar Region, LPS XXXIV.

High Latitude Polygons

NASA Technical Reports Server (NTRS)

2004-01-01

21 September 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows polygon patterned ground in the south polar region near 82.0oS, 90.8oW. Polygons are fairly common at high latitudes in both martian hemispheres, but they do not occur everywhere. On Earth, features such as these would be good indicators of the presence and freeze-thaw cycles of ground ice. On Mars, the same might (emphasis on might) also be true. This image covers an area approximately 3 km (1.9 mi) across and is illuminated by sunlight from the upper left. Seasonal frost enhances the contrast in the scene; the darkest areas have advanced the farthest in the springtime defrosting process.

Active High-Latitude Dune-Gullies

NASA Image and Video Library

2015-06-17

Gully and defrosting activity have been visible here along the edge of a dune field, along with blocks of frost. Observations from NASA Mars Reconnaissance Orbiter of the same area help check for repeat activity, as well as measuring those meter-scale blocks that we've seen prior. In this case, we want to compare any possible changes with a previous observation, which we acquired in 2011. We've also seen images where carbon dioxide frost was the driving process in creating new gullies, so we know their formation is occurring to this day. Tracking for changes, especially when we look at the 1-kilometer enhanced color swath, can help us find more. http://photojournal.jpl.nasa.gov/catalog/PIA19843

Defrosting Gully Aprons

NASA Technical Reports Server (NTRS)

2003-01-01

MGS MOC Release No. MOC2-398, 21 June 2003

This is a late winter Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) picture of frost-covered gullies in a crater in the martian southern hemisphere. The dark spots are areas where the frost has begun to change or sublime away. The gullies are formed by a combination of mass movement (landsliding) and possibly fluid flow through the channels--whether the fluid was liquid water or some other material is unknown. Today, the surfaces are dry and subjected to the seasonal coming-and-going of carbon dioxide frost. The image is located near 71.0oS, 95.5oW. Sunlight illuminates the scene from the upper left.

Dunes with Frost

NASA Technical Reports Server (NTRS)

2004-01-01

31 May 2004 Springtime for the martian northern hemisphere brings defrosting spots and patterns to the north polar dune fields. This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows an example located near 76.7oN, 250.4oW. In summer, these dunes would be darker than their surroundings. However, while they are still covered by frost, they are not any darker than the substrate across which the sand is slowly traveling. Dune movement in this case is dominated by winds that blow from the southwest (lower left) toward the northeast (upper right). The picure covers an area about 3 km (1.9 mi) across and is illuminated by sunlight from the lower left.

Consumer Attitudes Toward Storing and Thawing Chicken and Effects of the Common Thawing Practices on Some Quality Characteristics of Frozen Chicken

PubMed Central

Benli, Hakan

2016-01-01

In this study, a survey was conducted to both evaluate the consumers’ general attitudes for purchasing and storing the raw chicken and determine the thawing practices used for defrosting frozen chicken at home. About 75% of the consumers indicated purchasing chicken meat at least once a week or more. Furthermore, the majority (82.16%) of those who stored at least a portion of the raw chicken stated freezing the raw chicken meat at home. Freezing the chicken meat was considered to have no effect on the quality by 43.49% of the consumers while 56.51% thought that freezing had either negative or positive effects on the quality. The survey study indicated that top five most commonly used thawing practices included thawing on the kitchen counter, thawing in the refrigerator, thawing in the warm water, thawing in the microwave, and thawing under tap water. In addition, an experimental study was conducted to determine the effects of these most commonly used thawing practices on some quality characteristics of the chicken meat including pH, drip loss, cooking loss, color analysis and textural profile analysis. Although, L* value for thawing on the kitchen counter was the lowest, after cooking, none of the thawing treatments have a significant effect on the color values. Thawing in the microwave produced the highest drip loss of 3.47% while the lowest drip loss of 0.62% was observed with thawing in the refrigerator. On the other hand, thawing in the microwave and refrigerator caused the lowest cooking loss values of 18.29% and 18.53%, respectively. Nevertheless, there were no significant differences among textural parameter values of the defrosted and then cooked samples using the home based thawing practices, indicating similar quality characteristics among the samples. PMID:26732333

A technique for magnetic resonance imaging of equine cadaver specimens.

PubMed

Widmer, W R; Buckwalter, K A; Hill, M A; Fessler, J F; Ivancevich, S

1999-01-01

We tested an adaptation of a technique for performing magnetic resonance (MR) imaging of human cadaver limbs in the horse. The forelimbs from a normal horse were collected, frozen, and sealed with a paraffin-polymer combination prior to imaging with either a high- or midfield magnetic resonance scanner. Each forelimb was defrosted, scanned, and refrozen on two separate occasions. A five-point scale was used to evaluate the quality of each set of sagittal and transverse, T1-weighted images of each digit. There was no difference in image quality between first and second scans of either specimen (p > 0.05). We conclude that this technique allows investigators to bank tissue specimens for future magnetic resonance imaging without significant loss of image quality.

Frostless heat pump having thermal expansion valves

DOEpatents

Chen, Fang C [Knoxville, TN; Mei, Viung C [Oak Ridge, TN

2002-10-22

A heat pump system having an operable relationship for transferring heat between an exterior atmosphere and an interior atmosphere via a fluid refrigerant and further having a compressor, an interior heat exchanger, an exterior heat exchanger, a heat pump reversing valve, an accumulator, a thermal expansion valve having a remote sensing bulb disposed in heat transferable contact with the refrigerant piping section between said accumulator and said reversing valve, an outdoor temperature sensor, and a first means for heating said remote sensing bulb in response to said outdoor temperature sensor thereby opening said thermal expansion valve to raise suction pressure in order to mitigate defrosting of said exterior heat exchanger wherein said heat pump continues to operate in a heating mode.

Comparative analysis of geological features and seasonal processes in "Inca City" and "Pityusa Patera" regions on Mars

NASA Astrophysics Data System (ADS)

Manrubia, S. C.; Prieto Ballesteros, O.; González Kessler, C.; Fernández Remolar, D.; Córdoba-Jabonero, C.; Selsis, F.; Bérczi, S.; Gánti, T.; Horváth, A.; Sik, A.; Szathmáry, E.

2004-03-01

We carry out a comparative analysis of the morphological and seasonal features of two regions in the Martian Southern Polar Region: the Inca City (82S 65W) and the Pityusa Patera zone (66S 37E). These two sites are representative of a large number of areas which are subjected to dynamical, seasonal processes that deeply modify the local conditions of those regions. Due to varitions in sunlight, seasonal CO2 accumulates during autumn and winter and starts defrosting in spring. By mid summer the seasonal ice has disappeared. Despite a number of relevant differences in the morphology of the seasonal features observed, they seem to result from similar processes.

Highly Transparent and Conductive Metallized Nanofibers by Electrospinning and Electroplating

NASA Astrophysics Data System (ADS)

Yoon, Sam S.; Yarin, Alexander L.

2017-11-01

Transparent conducting films (TCFs) and transparent heaters (THs) are of interest for a wide variety of applications, from displays to window defrosters. Here, we demonstrate production of highly flexible, conducting, and transparent copper (Cu), nickel (Ni), platinum (Pt), and silver (Ag) nanofibers suitable for use not only in TCFs and THs but also in some other engineering applications. The merging of fibers at their intersections (i.e. self-junctioning) minimizes contact resistance in these films. These metallized nanofibers exhibited a remarkably low sheet resistance at a high optical transmittance. This low sheet resistance allows them to serve as low-voltage heaters, achieving a high heating temperature at a relatively low applied voltage. These nanofibers are free-standing, flexible, stretchable, and their mechanical reliability was confirmed through various mechanical endurance tests.

Research on curing behavior of concrete with anti-frost admixtures at subzero temperature

NASA Astrophysics Data System (ADS)

Ionov, Yulian; Kramar, Ludmila; Kirsanova, Alena; Kolegova, Irina

2017-01-01

The purpose of this paper is research on curing behavior of cold-weather concrete with anti-frost admixtures. During the study derivative thermal and X-ray phase analyses were performed and tests were carried out according to the standard GOST technique. The research results obtained reveal the peculiarities of cement hydration and concrete curing at subzero temperatures. The influence of subzero temperatures and anti-frost admixtures on hydrated phases of hardened cement paste and concrete strength formation was studied. It is found that cold-weather concrete does not cure at subzero temperatures, but when defrosting it attains 80 to 85% of its grade strength by the 28th day. Concrete achieves its grade strength when curing in normal conditions in 60 days only. Freezing concrete with anti-frost admixtures results in increase of calcium hydroxide content in hardened cement paste immediately when produced and has increased tendency of concrete to carbonation.

Resurrection of a bull by cloning from organs frozen without cryoprotectant in a -80 degrees c freezer for a decade.

PubMed

Hoshino, Yoichiro; Hayashi, Noboru; Taniguchi, Shunji; Kobayashi, Naohiko; Sakai, Kenji; Otani, Tsuyoshi; Iritani, Akira; Saeki, Kazuhiro

2009-01-01

Frozen animal tissues without cryoprotectant have been thought to be inappropriate for use as a nuclear donor for somatic cell nuclear transfer (SCNT). We report the cloning of a bull using cells retrieved from testicles that had been taken from a dead animal and frozen without cryoprotectant in a -80 degrees C freezer for 10 years. We obtained live cells from defrosted pieces of the spermatic cords of frozen testicles. The cells proliferated actively in culture and were apparently normal. We transferred 16 SCNT embryos from these cells into 16 synchronized recipient animals. We obtained five pregnancies and four cloned calves developed to term. Our results indicate that complete genome sets are maintained in mammalian organs even after long-term frozen-storage without cryoprotectant, and that live clones can be produced from the recovered cells.

Dual source heat pump

DOEpatents

Ecker, Amir L.; Pietsch, Joseph A.

1982-01-01

What is disclosed is a heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating the fluid in heat exchange relationship with a refrigerant fluid; at least two refrigerant heat exchangers, one for effecting heat exchange with the fluid and a second for effecting heat exchange between refrigerant and a heat exchange fluid and the ambient air; a compressor for efficiently compressing the refrigerant; at least one throttling valve for throttling liquid refrigerant; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circulating device and heat exchange fluid circuit for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and direction of flow of the refrigerant therethrough for selecting a particular mode of operation. The heat exchange fluid provides energy for defrosting the second heat exchanger when operating in the air source mode and also provides a alternate source of heat.

The value of frozen cartilage tissues without cryoprotection for genetic conservation.

PubMed

Cetinkaya, Gaye; Hatipoglu, Ibrahim; Arat, Sezen

2014-02-01

Animal tissues frozen without cryoprotection are thought to be inappropriate for use as a donor for somatic cell nuclear transfer (SCNT) studies. Cells in tissues that have been frozen without a cryoprotectant are commonly thought to be dead or to have lost genomic integrity. However, in this study we show that the frozen auricular cartilage tissues of anatolian buffalo contain a considerable number of viable healthy cells. The cells in auricular cartilage tissues are resistant to cryo-injury at -80°C. Primary cell cultures were established from defrosted ear tissues which were frozen without cryoprotectant. The growth and functional characteristics of primary cell cultures are characterized according to cell growth curve, cell cycle analysis, karyotype and GAG synthesis. The results indicate that frozen cartilage tissues could be valuable materials for the conservation of species and SCNT technology. Copyright © 2013 Elsevier Inc. All rights reserved.

Frost Growth CFD Model of an Integrated Active Desiccant Rooftop Unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geoghegan, Patrick J; Petrov, Andrei Y; Vineyard, Edward Allan

2008-01-01

A frost growth model is incorporated into a Computational Fluid Dynamics (CFD) simulation of a heat pump by means of a user-defined function in FLUENT, a commercial CFD code. The transient model is applied to the outdoor section of an Integrated Active Desiccant Rooftop (IADR) unit in heating mode. IADR is a hybrid vapor compression and active desiccant unit capable of handling 100% outdoor air (dedicated outdoor air system) or as a total conditioning system, handling both outdoor air and space cooling or heating loads. The predicted increase in flow resistance and loss in heat transfer capacity due to frostmore » build-up are compared to experimental pressure drop readings and thermal imaging. The purpose of this work is to develop a CFD model that is capable of predicting frost growth, an invaluable tool in evaluating the effectiveness of defrost-on-demand cycles.« less

IR Imaging Study on Heater Performamnce of Outside Rearview Mirrors for Automobiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hsin; England, Todd W

Adhesive bonded electrical heaters have been used in outside rearview mirrors of automobiles in order to act as defrosters. Entrapment of air pockets between the heater and the mirror can affects the performance and structural integrity of the mirror assembly. Since painting over the mirror is not an option in the production environment, the biggest challenge for IR imaging is to minimize surface reflection. Looking through a smooth, highly reflective first-surface mirror and a 2 mm thick glass without picking up other heat sources in the room, such as people, electronics equipment and the camera itself, requires careful planning andmore » effective shielding. In this paper, we present our method of avoiding mirror reflection and IR images of the heated mirror in operation. Production heaters and heaters with artificial defect were studied. The IR imaging method has shown to be an effective tool for heater quality control and performance studies.« less

Resurrection of a Bull by Cloning from Organs Frozen without Cryoprotectant in a −80°C Freezer for a Decade

PubMed Central

Hoshino, Yoichiro; Hayashi, Noboru; Taniguchi, Shunji; Kobayashi, Naohiko; Sakai, Kenji; Otani, Tsuyoshi; Iritani, Akira; Saeki, Kazuhiro

2009-01-01

Frozen animal tissues without cryoprotectant have been thought to be inappropriate for use as a nuclear donor for somatic cell nuclear transfer (SCNT). We report the cloning of a bull using cells retrieved from testicles that had been taken from a dead animal and frozen without cryoprotectant in a −80°C freezer for 10 years. We obtained live cells from defrosted pieces of the spermatic cords of frozen testicles. The cells proliferated actively in culture and were apparently normal. We transferred 16 SCNT embryos from these cells into 16 synchronized recipient animals. We obtained five pregnancies and four cloned calves developed to term. Our results indicate that complete genome sets are maintained in mammalian organs even after long-term frozen-storage without cryoprotectant, and that live clones can be produced from the recovered cells. PMID:19129919

Sprayable superhydrophobic nano-chains coating with continuous self-jumping of dew and melting frost

PubMed Central

Wang, Shanlin; Zhang, Wenwen; Yu, Xinquan; Liang, Caihua; Zhang, Youfa

2017-01-01

Spontaneous movement of condensed matter provides a new insight to efficiently improve condensation heat transfer on superhydrophobic surface. However, very few reports have shown the jumping behaviors on the sprayable superhydrophobic coatings. Here, we developed a sprayable silica nano-porous coating assembled by fluorinated nano-chains to survey the condensates’ dynamics. The dewdrops were continuously removed by self- and/or trigger-propelling motion due to abundant nano-pores from random multilayer stacking of nano-chains. In comparison, the dewdrops just could be slipped under the gravity effect on lack of nano-pores coatings stacked by silica nano-spheres and nano-aggregates. More interestingly, the spontaneous jumping effect also occurred on micro-scale frost crystals under the defrosting process on nano-chains coating surfaces. Different from self-jumping of dewdrops motion, the propelling force of frost crystals were provided by a sudden increase of the pressure under the frost crystal. PMID:28074938

Acetylated adipate of retrograded starch as RS 3/4 type resistant starch.

PubMed

Kapelko-Żeberska, M; Zięba, T; Spychaj, R; Gryszkin, A

2015-12-01

This study was aimed at producing acetylated adipate of retrograded starch (ADA-R) with various degrees of substitution with functional groups and at determining the effect of esterification degree on resistance and pasting characteristics of the produced preparations. Paste was prepared from native potato starch, and afterwards frozen and defrosted. After drying and disintegration, the paste was acetylated and crosslinked using various doses of reagents. An increase in the total degree of esterification of the produced ADA-R-preparation caused an increase in its resistance to the action of amyloglucosidase. Viscosity of the paste produced from ADA-R-preparation in a wide range of acetylation degrees was increasing along with increasing crosslinking of starch. The study demonstrated that acetylated adipate of retrograded starch may be classified as a preparation of RS 3/4 type resistant starch (retrograded starch/chemically-modified starch) with good texture-forming properties. The conducted modification offers the possibility of modeling the level of resistance of the produced preparation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Photoelastic stress investigation in underground large hole in permafrost soil (statics, thermoelasticity, dynamics, photoelastic strain-gauges)

NASA Astrophysics Data System (ADS)

Savostjanov, V. N.; Dvalishvili, V. V.; Sakharov, V. N.; Isajkin, A. S.; Frishter, L.; Starchevsky, A. V.

1991-12-01

The development of many-year-frost rock (MYFR) region hydrotechnic construction, the MYFR being quite a reliable construction based provided it is situated outside the seasonal temperature fluctuation layer, requires the rock stress-deformed state evaluating criteria working out with maximal possible account of static, dynamic, blast-hole drilling, and temperature effect on their properties. In estimating the hydroelectrical power station (HPS) underground building stress-deformed state the present work refers to experimental data and calculations, received by solving a linear task with further account of the building profile changing effect in the process of construction and the concrete and rock mechanic properties heterogeneity. The proposed order is justified, provided the rock mass defrosting depth value is small as compared to the rock separate block dimensions and it corresponds to the building construction period. The results are given for the Kolymskaya Hydroelectrical Power Station building cross-section, considered under flat deformation conditions.

10 Weeks of Change

NASA Technical Reports Server (NTRS)

2004-01-01

11 June 2004 These four Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) images show north polar sand dunes as they appeared on four different days over the past ten weeks. In summer, the dunes would be darker than the substrate on which they occur. However, it is currently spring in the northern hemisphere, and the dunes are still covered with frost from the previous winter. The MGS MOC has been busy over the past several months, documenting the changes in frost patterns that occur on dunes and interdune substrates all over the north polar region. The site shown here was imaged on 30 March, 23 April, 16 May, and 9 June 2004. The bright frost that covers the dunes progressively changes from one image to the next, as dark spots develop and frost sublimes away. This defrosting dune monitor site is located near 80.0oN, 237.5oW. Each strip is about 1.1 km (0.7 mi) wide and illuminated by sunlight from the lower left.

Commercial Absorption Heat Pump Water Heater: Beta Prototype Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geoghegan, Patrick; Ally, Moonis; Sharma, Vishaldeep

2016-10-14

The Beta version of the Commercial Absorption Heat Pump (CAHP) water heater was evaluated in the environmental chambers at Oak Ridge National Laboratory. Ambient air conditions ranged from 17 to 75 oF and inlet water temperatures ranged from 100 to 120oF in order to capture trends in performance. The unit was operated under full fire (100%) and partial fire (55%). The unit was found to perform at 90% of the project goal at the design conditions of 47oF ambient and 100oF water temperatures. The trends across the full range of environmental conditions were as expected for ambient air temperatures abovemore » 32oF. Below this temperature and for the full fire condition, frost accumulated on the evaporator coil. In future work a defrost strategy will be enabled, the unit will be thoroughly cleaned of an oil contamination and the rectifier will be reconfigured in order to meet the design goals and have a field test unit ready in early 2017.« less

Penetration of ASM 981 in canine skin: a comparative study.

PubMed

Gutzwiller, Meret E Ricklin; Reist, Martin; Persohn, Elke; Peel, John E; Roosje, Petra J

2006-01-01

ASM 981 has been developed for topical treatment of inflammatory skin diseases. It specifically inhibits the production and release of pro-inflammatory cytokines. We measured the skin penetration of ASM 981 in canine skin and compared penetration in living and frozen skin. To make penetration of ASM 981 visible in dog skin, tritium labelled ASM 981 was applied to a living dog and to defrosted skin of the same dog. Using qualitative autoradiography the radioactive molecules were detected in the lumen of the hair follicles until the infundibulum, around the superficial parts of the hair follicles and into a depth of the dermis of 200 to 500 microm. Activity could not be found in deeper parts of the hair follicles, the dermis or in the sebaceous glands. Penetration of ASM 981 is low in canine skin and is only equally spread in the upper third of the dermis 24 hours after application. Penetration in frozen skin takes even longer than in living canine skin but shows the same distribution.

Analysis of household refrigerators for different testing standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bansal, P.K.; McGill, I.

This study highlights the salient differences among various testing standards for household refrigerator-freezers and proposes a methodology for predicting the performance of a single evaporator-based vapor-compression refrigeration system (either refrigerator or freezer) from one test standard (where the test data are available-the reference case) to another (the alternative case). The standards studied during this investigation include the Australian-New Zealand Standard (ANZS), the International Standard (ISO), the American National Standard (ANSI), the Japanese Industrial Standard (JIS), and the Chinese National Standard (CNS). A simple analysis in conjunction with the BICYCLE model (Bansal and Rice 1993) is used to calculate the energymore » consumption of two refrigerator cabinets from the reference case to the alternative cases. The proposed analysis includes the effect of door openings (as required by the JIS) as well as defrost heaters. The analytical results are found to agree reasonably well with the experimental observations for translating energy consumption information from one standard to another.« less

Return to "Giant's Footprint" 3 Decades After Mariner 7 Flyby

NASA Image and Video Library

2000-04-24

As we head into the 21st Century, it seems hard to believe that human beings have been sending spacecraft toward Mars for more than 3 decades already. The first spacecraft to reach Mars was Mariner 4 in 1965. This success was followed by two spacecraft in 1969, Mariners 6 and 7. Now the wonders and alien beauty of Mars continue to unfold with each day that the Mars Global Surveyor -- which arrived in September 1997 -- continues to radio its data to Earth. Mars exploration was always difficult and each bit of data returned from the planet is a marvel. On August 5, 1969, the Mariner 7 spacecraft flew past Mars at a minimum altitude of about 4200 km. It acquired 14 wide/narrow angle image pairs during the few minutes of the "near encounter" flyby. One of these image pairs, 7N19/7N20, shows the south polar region and contains a feature that at the time was nicknamed "the Giant's Footprint." Shown in the first two pictures, above, the feature consists of two adjoining craters, one about 80 km (50 mi) in diameter and the other about 50 km (31 mi) across near latitude 76°S, longitude 276°W. The oblique geometry of the Mariner 7 image enhances the impression of a footprint. The "Giant's Footprint" was almost missed when Mariner 7 suffered a near-catastrophic battery failure just a few days before the encounter -- on July 30 -- that put the spacecraft sporadically out of contact with Earth for two days. Ground controllers at the Jet Propulsion Laboratory (JPL)recovered the spacecraft, re-planned its imaging sequence based on results from the Mariner 6 flyby on July 31, and salvaged all of the mission's science goals in under a week! In the 1970's, the larger crater in "giant's footprint" was named "Vishniac" in honor of Wolf Vishniac, an American microbiologist of the University of Rochester who was instrumental in the development of methods to search for life on Mars. Vishniac was tragically killed in a fall in Antarctica in 1973 while retrieving a life detection experiment, and the crater was named in honor of this "giant" in the search for life on Mars. More than three decades after the Mariner 7 flyby, Mars Global Surveyor's Mars Orbiter Camera (MOC) acquired a commemorative view of the interior of Vishniac Crater on October 25, 1999. The context image and the 3-meters (9.8 feet)-per-pixel narrow angle view are shown above (in the lower image pair). Mariner 7's 7N20 has a nominal resolution of about 180 meters (591 feet) per pixel, while the MOC high resolution view is about 60 times higher (in actuality, the lower quality of the Mariner 7 images makes the resolution gain even more dramatic). The MOC high resolution view (lower right, above) shows a 1.5 kilometer-(0.9 mile)-wide portion of the floor of Vishniac in the process of defrosting during southern spring. The bright areas are still frost-covered, while the darker areas are either defrosted or composed of darkened or "dirty" frost. The dark patches in the image seem to serve as sources for dark streaks of material that has either been blown across the landscape by wind, or has somehow caused the erosion of frost to create the streaks. Dark streaks follow the local topography, as might the wind that blew across this landscape. This pattern of spots and streaks was quite common on the defrosting south polar cap during the spring that lasted from early August 1999 to late December 1999. All images shown here are illuminated by sunlight from the lower right. Image orientation with north toward the bottom was selected in order to show the "footprint" visible in Mariner 7 image 7N20. The Mariner 7 images were recovered at Malin Space Science Systems from the original 7-track magnetic tapes, archived on CD-ROM by the JPL Data Preservation activity. More images relating to the release can be viewed at http://photojournal.jpl.nasa.gov/catalog/PIA02365

Creating micro-scale surface topology to achieve anisotropic wettability on an aluminum surface

NASA Astrophysics Data System (ADS)

Sommers, Andrew D.; Jacobi, Anthony M.

2006-08-01

A technique for fabricating micropatterned aluminum surfaces with parallel grooves 30 µm wide and tens of microns in depth is described. Standard photolithographic techniques are used to obtain this precise surface-feature patterning. Positive photoresists, S1813 and AZ4620, are selected to mask the surface, and a mixture of BCl3 and Cl2 gases is used to perform the etching. Experimental data show that a droplet placed on the micro-grooved aluminum surface using a micro-syringe exhibits an increased apparent contact angle, and for droplets condensed on these etched surfaces, more than a 50% reduction in the volume needed for the onset of droplet sliding is manifest. No chemical surface treatment is necessary to achieve this water repellency; it is accomplished solely by an anisotropic surface morphology that manipulates droplet geometry and creates and exploits discontinuities in the three-phase contact line. These micro-structured surfaces are proposed for use in a broad range of air-cooling applications, where the management of condensate and defrost liquid on the heat transfer surface is essential to the energy-efficient operation of the machine.

Improving resistance of high strength concrete (HSC) bridge beams to frost and defrosting salt attack by application of hydrophobic agent

NASA Astrophysics Data System (ADS)

Kolisko, Jiri; Balík, Lukáš; Kostelecka, Michaela; Pokorný, Petr

2017-09-01

HSC (High Strength Concrete) is increasingly used for bearing bridge structures nowadays. Bridge structures in the Czech Republic are exposed to severe conditions in winter time and durability of the concrete is therefore a crucial requirement. The high strength and low water absorption of HSC suggests that the material will have high durability. However, the situation may not be so straightforward. We carried out a study of the very poor durability of HSC concrete C70/85 used to produce prestresed beams 37.1 m in length to build a 6-span highway bridge. After the beams were cast, a production control test indicated some problems with the durability of the concrete. There was a danger that 42 of the beams would not be suitable for use. All participants in the bridge project finally decided, after extensive discussions, to attempt to improve the durability of the concrete by applying a hydrophobic agent. Paper will present the results of comparative tests of four hydrophobic agents in order to choose one for real application and describes this application on construction site.

Fin-and-tube heat exchanger material and inlet velocity effect under frosting conditions

NASA Astrophysics Data System (ADS)

Keryakos, Elie; Toubassy, Joseph; Danlos, Amélie; Clodic, Denis; Descombes, Georges

2017-02-01

The frosting fin-and-tube heat exchanger used in this study is implemented in the dehydration process of a biogas upgrading pilot. Water is separated from the biogas by frosting it at very low temperatures on the cold surfaces of the fin-and-tube heat exchanger. Once frosted, a defrosting system is used to remove water from the process. The main interest of this study is the frosting system. The effects of the biogas velocity, fin material, tube material and frost layer thickness on the performance of the fin-and-tube heat exchanger are investigated. Increasing the biogas velocity tends to increase the frosting layer thickness and the external pressure drop. This will lead to decrease the heat exchanger performance and the frosting cycle duration. The thermal conductivity of the fins and tubes has a major effect on the performance of the heat exchanger. Higher thermal conductivity decreases the heat exchanged surface. A numerical model has been developed, then numerical and experimental results extracted from a biogas upgrading pilot are compared.

Estimates of Refrigerator Loads in Public Housing Based on Metered Consumption Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, JD; Pratt, RG

1998-09-11

The New York Power Authority (NYPA), the New York City Housing Authority (NYCHA), and the U.S. Departments of Housing and Urban Development (HUD) and Energy (DOE) have joined in a project to replace refrigerators in New York City public housing with new, highly energy-efficient models. This project laid the ground work for the Consortium for Energy Efficiency (CEE) and DOE to enable housing authorities throughout the United States to bulk-purchase energy-efficient appliances. DOE helped develop and plan the program through the ENERGY STAR@ Partnerships program conducted by its Pacific Nofiwest National Laboratory (PNNL). PNNL was subsequently asked to conduct themore » savings evahations for 1996 and 1997. PNNL designed the metering protocol and occupant survey, supplied and calibrated the metering equipment, and managed and analyzed the data. The 1996 metering study of refrigerator energy usage in New York City public housing (Pratt and Miller 1997) established the need and justification for a regression-model-based approach to an energy savings estimate. The need originated in logistical difficulties associated with sampling the population and pen?orming a stratified analysis. Commonly, refrigerators[a) with high representation in the population were missed in the sampling schedule, leaving significant holes in the sample and difficulties for the stratified anrdysis. The just{jfcation was found in the fact that strata (distinct groups of identical refrigerators) were not statistically distinct in terms of their label ratio (ratio of metered consumption to label rating). This finding suggested a general regression model could be used to represent the consumption of all refrigerators in the population. In 1996 a simple two-coefficient regression model, a function of only the refrigerator label rating, was developed and used to represent the existing population of refrigerators. A key concept used in the 1997 study grew from findings in a small number of apartments metered in 1996 with a detailed protocol. Fifteen-minute time-series data of ambient and compartment temperatures and refrigerator power were analyzed and demonstrated the potential for reducing power records into three components. This motivated the development of an analysis process to divide the metered consumption into baseline load, occupant-associated load, and defrosting load. The baseline load is the consumption that would occur if the refrigerator were on but had no occupant usage load (no door-opening events) and the defrosting mechanism was disabled. The motivation behind this component reduction process was the hope that components could be more effectively modeled than the total. We reasoned that the components would lead to abetter (more general and more significant) understanding of the relationships between consumption, the characteristics of the refrigerator, and its operating environment.« less

Salmonellae Associated with Further-processed Turkey Products1

PubMed Central

Bryan, Frank L.; Ayres, John C.; Kraft, Allen A.

1968-01-01

“Further-processed” turkey products, prepared from chilled, eviscerated, and thawed carcasses at two commercial turkey-processing plants, were evaluated, for the presence of salmonellae. These organisms were isolated from swab samples from 12% of chilled, eviscerated turkey carcasses, 27% of finished products, and 24% of processing equipment. The same serotypes as those found throughout a plant on any one visit were recovered from 31% of rinse-samples taken from hands and gloves of processing personnel. Salmonellae were found in samples taken on 37 of 48 visits; a greater number of recoveries were made on days when freshly killed turkeys were processed (87%) than when frozen-defrosted carcasses were processed (59%). The predominant serotype isolated from meat and environment usually changed from visit to visit. Salmonella sandiego and Salmonella anatum were the most frequent among 23 serotypes recovered. Most of the isolated serotypes are commonly associated with turkeys and have been incriminated as causative agents of human salmonellosis. The implication is that further-processed turkey products, if inadequately cooked by the consumer and if improperly refrigerated between the time of manufacture and consumption, could directly transmit salmonellae. These same products might also contaminate other foods by introducing salmonellae into food-preparation areas. PMID:5688832

The proliferation potential of promastigotes of the main Leishmania species of the old world in NNN culture medium prepared using blood of four different mammals.

PubMed

Ladopoulos, Theodoros; Ntais, Pantelis; Tsirigotakis, Nikolaos; Dokianakis, Emmanouil; Antoniou, Maria

2015-10-01

The efficacy of the in vitro cultivation of promastigotes of four Leishmania spp. was tested in the biphasic Novy-MacNeal-Nicolle (NNN) medium prepared using blood from different animals (horse, donkey, goat and sheep). The aim was to test which NNN preparation gave the best yield in the shortest time for different parasite species, in order to obtain a large crop of promastigotes for experimental work and for antigen preparation. Promastigotes of Leishmania infantum, Leishmania donovani, Leishmania tropica and Leishmania major, the four main parasite species occurring in the old world, were defrosted from -80 °C and placed, at equal numbers, in the 4 different NNN preparations. At the end of the 7th day, the NNN medium using horse blood produced the greatest number of promastigotes for all Leishmania spp. tested, whilst goat blood proved the poorest medium, providing culture results only for L. infantum. This finding may be explained by the fact that Leishmania is a nicotinamide adenine dinucleotide (NAD) auxotroph and horse erythrocytes support NAD-dependent microorganisms. Copyright © 2015 Elsevier Inc. All rights reserved.

Low Temperature Synthesis of Fluorine-Doped Tin Oxide Transparent Conducting Thin Film by Spray Pyrolysis Deposition.

PubMed

Ko, Eun-Byul; Choi, Jae-Seok; Jung, Hyunsung; Choi, Sung-Churl; Kim, Chang-Yeoul

2016-02-01

Transparent conducting oxide (TCO) is widely used for the application of flat panel display like liquid crystal displays and plasma display panel. It is also applied in the field of touch panel, solar cell electrode, low-emissivity glass, defrost window, and anti-static material. Fluorine-doped tin oxide (FTO) thin films were fabricated by spray pyrolysis of ethanol-added FTO precursor solutions. FTO thin film by spray pyrolysis is very much investigated and normally formed at high temperature, about 500 degrees C. However, these days, flexible electronics draw many attentions in the field of IT industry and the research for flexible transparent conducting thin film is also required. In the industrial field, indium-tin oxide (ITO) film on polymer substrate is widely used for touch panel and displays. In this study, we investigated the possibility of FTO thin film formation at relatively low temperature of 250 degrees C. We found out that the control of volume of input precursor and exhaust gases could make it possible to form FTO thin film with a relatively low electrical resistance, less than 100 Ohm/sq and high optical transmittance about 88%.

Seasonal activity and morphological changes in martian gullies

USGS Publications Warehouse

Dundas, Colin M.; Diniega, Serina; Hansen, Candice J.; Byrne, Shane; McEwen, Alfred S.

2012-01-01

Recent studies of martian dune and non-dune gullies have suggested a seasonal control on present-day gully activity. The timing of current gully activity, especially activity involving the formation or modification of channels (which commonly have been taken as evidence of fluvial processes), has important implications regarding likely gully formation processes and necessary environmental conditions. In this study, we describe the results of frequent meter-scale monitoring of several active gully sites by the High Resolution Imaging Science Experiment (HiRISE) on the Mars Reconnaissance Orbiter (MRO). The aim is to better assess the scope and nature of current morphological changes and to provide improved constraints on timing of gully activity on both dune and non-dune slopes. Our observations indicate that (1) gully formation on Mars is ongoing today and (2) the most significant morphological changes are strongly associated with seasonal frost and defrosting activity. Observed changes include formation of all major components of typical gully landforms, although we have not observed alcove formation in coherent bedrock. These results reduce the need to invoke recent climate change or present-day groundwater seepage to explain the many martian gullies with pristine appearance.

Return to 'Giant's Footprint' 3 Decades After Mariner 7 Flyby

NASA Technical Reports Server (NTRS)

2000-01-01

[figure removed for brevity, see original site] Click for full-resolution image.

[figure removed for brevity, see original site] Click for full-resolution image.

[figure removed for brevity, see original site] Click for full-resolution image.

[figure removed for brevity, see original site] Click for full-resolution image.

As we head into the 21st Century, it seems hard to believe that human beings have been sending spacecraft toward Mars for more than 3 decades already. The first spacecraft to reach Mars was Mariner 4 in 1965. This success was followed by two spacecraft in 1969, Mariners 6 and 7. Now the wonders and alien beauty of Mars continue to unfold with each day that the Mars Global Surveyor--which arrived in September 1997--continues to radio its data to Earth.

Mars exploration was always difficult and each bit of data returned from the planet is a marvel. On August 5, 1969, the Mariner 7 spacecraft flew past Mars at a minimum altitude of about 4200 km. It acquired 14 wide/narrow angle image pairs during the few minutes of the 'near encounter' flyby. One of these image pairs, 7N19/7N20, shows the south polar region and contains a feature that at the time was nicknamed 'the Giant's Footprint.' Shown in the first two pictures, above, the feature consists of two adjoining craters, one about 80 km (50 mi) in diameter and the other about 50 km (31 mi) across near latitude 76oS, longitude 276oW. The oblique geometry of the Mariner 7 image enhances the impression of a footprint.

The 'Giant's Footprint' was almost missed when Mariner 7 suffered a near-catastrophic battery failure just a few days before the encounter--on July 30--that put the spacecraft sporadically out of contact with Earth for two days. Ground controllers at the Jet Propulsion Laboratory (JPL)recovered the spacecraft, re-planned its imaging sequence based on results from the Mariner 6 flyby on July 31, and salvaged all of the mission's science goals in under a week!

In the 1970's, the larger crater in 'giant's footprint' was named 'Vishniac' in honor of Wolf Vishniac, an American microbiologist of the University of Rochester who was instrumental in the development of methods to search for life on Mars. Vishniac was tragically killed in a fall in Antarctica in 1973 while retrieving a life detection experiment, and the crater was named in honor of this 'giant' in the search for life on Mars.

More than three decades after the Mariner 7 flyby, Mars Global Surveyor's Mars Orbiter Camera (MOC) acquired a commemorative view of the interior of Vishniac Crater on October 25, 1999. The context image and the 3-meters (9.8 feet)-per-pixel narrow angle view are shown above (in the lower image pair). Mariner 7's 7N20 has a nominal resolution of about 180 meters (591 feet) per pixel, while the MOC high resolution view is about 60 times higher (in actuality, the lower quality of the Mariner 7 images makes the resolution gain even more dramatic).

The MOC high resolution view (lower right, above) shows a 1.5 kilometer-(0.9 mile)-wide portion of the floor of Vishniac in the process of defrosting during southern spring. The bright areas are still frost-covered, while the darker areas are either defrosted or composed of darkened or 'dirty' frost. The dark patches in the image seem to serve as sources for dark streaks of material that has either been blown across the landscape by wind, or has somehow caused the erosion of frost to create the streaks. Dark streaks follow the local topography, as might the wind that blew across this landscape. This pattern of spots and streaks was quite common on the defrosting south polar cap during the spring that lasted from early August 1999 to late December 1999.

All images shown here are illuminated by sunlight from the lower right. Image orientation with north toward the bottom was selected in order to show the 'footprint' visible in Mariner 7 image 7N20. The Mariner 7 images were recovered at Malin Space Science Systems from the original 7-track magnetic tapes, archived on CD-ROM by the JPL Data Preservation activity.

Advances in understanding of mammalian penile evolution, human penile anatomy and human erection physiology: Clinical implications for physicians and surgeons

PubMed Central

Hsieh, Cheng-Hsing; Liu, Shih-Ping; Hsu, Geng-Long; Chen, Heng-Shuen; Molodysky, Eugen; Chen, Ying-Hui; Yu, Hong-Jeng

2012-01-01

Summary Recent studies substantiate a model of the tunica albuginea of the corpora cavernosa as a bi-layered structure with a 360° complete inner circular layer and a 300° incomplete outer longitudinal coat spanning from the bulbospongiosus and ischiocavernosus proximally and extending continuously into the distal ligament within the glans penis. The anatomical location and histology of the distal ligament invites convincing parallels with the quadrupedal os penis and therefore constitutes potential evidence of the evolutionary process. In the corpora cavernosa, a chamber design is responsible for facilitating rigid erections. For investigating its venous factors exclusively, hemodynamic studies have been performed on both fresh and defrosted human male cadavers. In each case, a rigid erection was unequivocally attainable following venous removal. This clearly has significant ramifications in relation to penile venous surgery and its role in treating impotent patients. One deep dorsal vein, 2 cavernosal veins and 2 pairs of para-arterial veins (as opposed to 1 single vein) are situated between Buck’s fascia and the tunica albuginea. These newfound insights into penile tunical, venous anatomy and erection physiology were inspired by and, in turn, enhance clinical applications routinely encountered by physicians and surgeons, such as penile morphological reconstruction, penile implantation and penile venous surgery. PMID:22739749

A Full-Visible-Spectrum Invisibility Cloak for Mesoscopic Metal Wires.

PubMed

Kim, Sang-Woo; An, Byeong Wan; Cho, Eunjin; Hyun, Byung Gwan; Moon, Yoon-Jong; Kim, Sun-Kyung; Park, Jang-Ung

2018-06-13

Structured metals can sustain a very large scattering cross-section that is induced by localized surface plasmons, which often has an adverse effect on their use as transparent electrodes in displays, touch screens, and smart windows due to an issue of low clarity. Here, we report a broadband optical cloaking strategy for the network of mesoscopic metal wires with submicrometer to micrometer diameters, which is exploited for manufacturing and application of high-clarity metal-wires-based transparent electrodes. We prepare electrospun Ag wires with 300-1800 nm in diameter and perform a facile surface oxidation process to form Ag/Ag 2 O core/shell heterogeneous structures. The absorptive Ag 2 O shell, together with the coating of a dielectric cover, leads to the cancellation of electric multipole moments in Ag wires, thereby drastically suppressing plasmon-mediated scattering over the full visible spectrum and rendering Ag wires to be invisible. Simultaneously with the effect of invisibility, the transmittance of Ag/Ag 2 O wires is significantly improved compared to bare Ag wires, despite the formation of an absorptive Ag 2 O shell. As an application example, we demonstrate that these invisible Ag wires serve as a high-clarity, high-transmittance, and high-speed defroster for automotive windshields.

A transient analysis of frost formation on a parallel plate evaporator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinez-Frias, J.; Aceves, S.M.; Hernandez-Guerrero, A.

1996-12-31

This paper presents the development of a transient model for evaluating frost formation on a parallel plate evaporator for heat pump applications. The model treats the frost layer as a porous substance, and applies the equations of conservation of mass, momentum and energy to calculate the growth and densification of the frost layer. Empirical correlations for thermal conductivity and tortuosity as a function of density are incorporated from previous studies. Frost growth is calculated as a function of time, Reynolds number, longitudinal location, plate temperature, and ambient air temperature and humidity. The main assumptions are: ideal gas behavior for airmore » and water vapor, uniform frost density and thermal conductivity across the thickness of the frost layer; and quasi-steady conditions during the whole process. The mathematical model is validated by comparing the predicted values of frost thickness and frost density with results obtained in recent experimental studies. A good agreement was obtained in the comparison. The frost formation model calculates pressure drop and heat transfer resistance that result from the existence of the frost layer, and it can therefore be incorporated into a heat pump model to evaluate performance losses due to frosting as a function of weather conditions and time of operation since the last evaporator defrost.« less

Characteristics of the new AtriCure cryoFORM® cryoablation probe for the surgical treatment of cardiac arrhythmias.

PubMed

Schroeter, Thomas; Misfeld, Martin

2017-04-01

Atrial fibrillation has a significant impact on patient mortality and morbidity. In particular, stroke is a frequent complication associated with atrial fibrillation. In recent years, various treatment options have been developed that are based on the elimination of atypical electrically active atrial areas. Areas covered: This manuscript presents a new cryoablation probe from AtriCure Inc. In addition to describing the characteristics of the probe, we also discuss atrial fibrillation and its surgical therapy options as well as the basics of cryosurgery. The cryoFORM® cryoablation probe is an ablation system developed for cardiothoracic surgeons that utilizes nitrous oxide (N 2 O) to create continuous transmural lesions that block propagation of atrial activation. The main features of the probe are an excellent working capacity due to the use of N 2 O, high flexibility, and, in combination with the cryoICE® Box V6, an active defrost mode for quick detachment. Expert commentary: The cryoFORM® ablation probe is a new device for the treatment of atrial fibrillation using N 2 O as an energy source. The probe is made from stainless steel and has a corrugated surface, a design that provides a higher flexibility than the cryoICE probe.

Supermarket refrigeration assessment for the Commonwealth Electric Company

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsaros, T.L.; Walker, D.H.

The Commonwealth Electric Company (COM/Electric) has initiated an incentive program to promote electric energy conservation within its service territory. The Electric Power Research Institute (EPRI) has assisted COM/Electric in assessing the impact on the utility and its customers of implementing energy efficient supermarket refrigeration in retrofit applications. The primary task of this assessment was to contact the supermarket chains and refrigeration contractors and suppliers in the COM/Electric service territory to determine the type of refrigeration employed and standard or novel retrofit equipment implemented in supermarkets. With this information, estimates were made of the potential energy savings that COM/Electric and themore » supermarkets could realize if supermarkets were retrofitted with energy efficient refrigeration equipment. It was determined that the refrigerated display case features offering the greatest potential for savings through retrofit installations include doors for medium temperature multideck cases, high-efficiency fan motors, anti-sweat heater controls, and vinyl strip curtains for walk-in coolers. The retrofit components associated with the compressor machine room that offer the greatest potential for savings include the use of low heat pressure control, hot gas defrost, and external liquid-suction heat exchangers and remote evaporative subcoolers for low temperature refrigeration. 6 refs., 14 figs., 26 tabs.« less

Tallow amphopolycarboxyglycinate-stabilized silver nanoparticles: new frontiers in development of plant protection products with a broad spectrum of action against phytopathogens

NASA Astrophysics Data System (ADS)

Krutyakov, Yurii A.; Kudrinskiy, Alexey A.; Zherebin, Pavel M.; Yapryntsev, Alexey D.; Pobedinskaya, Marina A.; Elansky, Sergey N.; Denisov, Albert N.; Mikhaylov, Dmitry M.; Lisichkin, Georgii V.

2016-07-01

Sustainable agriculture calls for minimal use of agrochemicals in order to protect the environment. It has caused an increase in the rate of nanoparticles use, in particular silver nanoparticles (AgNPs) due to their safety for mammals, unique biological activity and a broad spectrum of action against fungal and bacterial pathogens. Until now the use of AgNPs dispersions in the agricultural sector has been essentially limited due to many factors decreased their stability (mixing with other pesticides, presence of electrolytes). We present a versatile synthesis of polyampholyte surfactant (tallow amphopolycarboxyglycinate) stabilized AgNPs. We took a close look at unique aggregation behavior (via dynamic light scattering and UV-vis spectroscopy) and biocidal activity of obtained silver colloids. AgNPs are characterized by exclusively high aggregative stability in the presence of coagulating agents NaNO3 and NaSO4 (up to 1 M), during drying/redispergation, and frost/defrost cycles. The dispersion of AgNPs shows high biocidal activity (EC50 is ten times lower than commercial species ones) with respect to Phytophthora infestans and phytopathogenic fungi. This points to the possibility of successful application of silver preparations within agriculture with the goal of partial reduction of the use of toxic and expensive synthetic antibiotics and pesticides.

Effect of frozen storage, different thawing methods and cooking processes on the survival of Salmonella spp. and Escherichia coli O157:H7 in commercially shaped beef patties.

PubMed

Manios, Stavros G; Skandamis, Panagiotis N

2015-03-01

The effect of common handling practices (i.e., freezing, thawing and cooking) of beef patties on the survival of Salmonella spp. and Escherichia coli O157:H7, was evaluated. Inoculated ground beef was stored at -22 °C for 5 and 75 days. After thawing at 4 °C/16 h, 20 °C/12 h, in microwave/22-24 min, or without prior thawing, beef patties (90 g) were shaped and cooked in oven-broiler or in pan-grill to internal temperatures of 60 °C or 71 °C. Cooking in oven-broiler was more effective compared to pan-grill, especially when cooked to 71 °C. Defrosting methods did not affect significantly (P ≥ 0.05) the survival of the pathogens during subsequent cooking. Frozen storage for 75 days enhanced the survival of E. coli O157:H7, as the pathogen survived 3.1 logCFU/g when cooked in oven-broiler at 71 °C. Results may supplement the existing guidelines for the appropriate practices, associated with freezing, thawing and cooking of patties in households or catering services. Copyright © 2014 Elsevier Ltd. All rights reserved.

Improved Flexible Transparent Conductive Electrodes based on Silver Nanowire Networks by a Simple Sunlight Illumination Approach

PubMed Central

Kou, Pengfei; Yang, Liu; Chang, Cheng; He, Sailing

2017-01-01

Silver nanowire (Ag NW) networks have attracted wide attention as transparent electrodes for emerging flexible optoelectronics. However, the sheet resistance is greatly limited by large wire-to-wire contact resistances. Here, we propose a simple sunlight illumination approach to remarkably improve their electrical conductivity without any significant degradation of the light transmittance. Because the power density is extremely low (0.1 W/cm2, 1-Sun), only slight welding between Ag NWs has been observed. Despite this, a sheet resistance of <20 Ω/sq and transmittance of ~87% at wavelength of 550 nm as well as excellent mechanical flexibility have still been achieved for Ag NW networks after sunlight illumination for 1 hour or longer, which are significant upgrades over those of ITO. Slight plasmonic welding together with the associated self-limiting effect has been investigated by numerical simulations and further verified experimentally through varied solar concentrations. Due to the reduced resistance, high-performance transparent film heaters as well as efficient defrosters have been demonstrated, which are superior to the previously-reported Ag NW based film heaters. Since the sunlight is environmentally friendly and easily available, sophisticated or expensive facilities are not necessary. Our findings are particularly meaningful and show enormous potential for outdoor applications. PMID:28169343

Delayed condensation and frost formation on superhydrophobic carbon soot coatings by controlling the presence of hydrophilic active sites

NASA Astrophysics Data System (ADS)

Esmeryan, Karekin D.; Castano, Carlos E.; Mohammadi, Reza; Lazarov, Yuliyan; Radeva, Ekaterina I.

2018-02-01

Condensation frosting is an undesired natural phenomenon that could be impeded efficiently using appropriate wettability and morphologically patterned surfaces. The icephobic properties of carbon soot and the fabrication scalability of its synthesis method are a good foundation for anti-frosting applications; however, the fundamentals of frost growth and spreading on sooted surfaces have not been examined yet. In this study, we investigate the anti-frosting performance of three groups of superhydrophobic soot coatings by means of 16 MHz quartz crystal microbalances (QCMs). The analysis of the real-time sensor signal of each soot coated QCM pattern shows that frost formation and its propagation velocity depend on the quantity of oxygen functionalities and structural defects in the material. In turn, the reduction of both parameters shifts the onset of frost growth to temperatures below  -20 °C, whereas the interdroplet ice bridging is slowed by a factor of four. Moreover, high-resolution scanning electron micrographs of the samples imply delamination upon defrosting of the soot with spherical-like morphology via polar interactions driven mechanism. These results reveal an opportunity for control of frost incipiency on sooted surfaces by adjusting the synthesis conditions and depositing soot coatings with as low as possible content of hydrophilic active sites.

CO2 jets formed by sublimation beneath translucent slab ice in Mars' seasonal south polar ice cap

USGS Publications Warehouse

Kieffer, H.H.; Christensen, P.R.; Titus, T.N.

2006-01-01

The martian polar caps are among the most dynamic regions on Mars, growing substantially in winter as a significant fraction of the atmosphere freezes out in the form of CO2 ice. Unusual dark spots, fans and blotches form as the south-polar seasonal CO2 ice cap retreats during spring and summer. Small radial channel networks are often associated with the location of spots once the ice disappears. The spots have been proposed to be simply bare, defrosted ground; the formation of the channels has remained uncertain. Here we report infrared and visible observations that show that the spots and fans remain at CO2 ice temperatures well into summer, and must be granular materials that have been brought up to the surface of the ice, requiring a complex suite of processes to get them there. We propose that the seasonal ice cap forms an impermeable, translucent slab of CO2 ice that sublimates from the base, building up high-pressure gas beneath the slab. This gas levitates the ice, which eventually ruptures, producing high-velocity CO 2 vents that erupt sand-sized grains in jets to form the spots and erode the channels. These processes are unlike any observed on Earth. ?? 2006 Nature Publishing Group.

Rehydration properties of hybrid method dried fruit enriched by natural components

NASA Astrophysics Data System (ADS)

Kowalska, Hanna; Marzec, Agata; Kowalska, Jolanta; Ciurzyńska, Agnieszka; Samborska, Kinga; Bialik, Michał; Lenart, Andrzej

2018-04-01

The aim of the study was to determine the impact of osmotic pre-dehydration and drying of fruit on the rehydration properties of dried fruit. Herein, the effect of fruit juice, applied as a natural enriching substance was very important. In addition, the properties of dried fruits obtained through combined air-drying and subsequent microwave-vacuum drying with `puffing' effect were similar to the freeze-dried fruits, but showed other rehydration properties. As raw material, frozen strawberry (Honeoye variety) and fresh apples (Idared variety) were used in the study. The apples and partially defrosted strawberries were prior dehydrated in solutions of sucrose and a mixture of sucrose with chokeberry juice concentrate at 50°C for 2 h. Next, the fruit samples were dried by one of two ways: air-drying (50°C, 5 h) and microwavevacuum drying for about 360 s; and freeze-drying (30°C, 63 Pa, 24 h). The rehydration was carried out in distilled water (20°C, 5 h). The osmotic pre-dehydration hindered fruit drying process. The impact of drying method became particularly evident while examining the kinetics of rehydration. During the rehydration of the pre-dehydrated dried fruit a slower hydration could be observed. Freeze-dried strawberries absorbed 2-3 times more water than those dried by the `puffing' effect.

Frost-free Dunes

NASA Technical Reports Server (NTRS)

2006-01-01

[figure removed for brevity, see original site] Context image for PIA03291 Frost-free Dunes

These dark dunes are frost covered for most of the year. As southern summer draws to a close, the dunes have been completely defrosted.

Image information: VIS instrument. Latitude -66.6N, Longitude 37.0E. 34 meter/pixel resolution.

Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

Influence of carbon monoxide on the colour stability of defrosted yellowfin tuna (Thunnus albacares) muscle stored under aerobic and anaerobic conditions.

PubMed

Neethling, Nikki E; Hoffman, Louwrens C; Britz, Trevor J; O'Neill, Bernadette

2015-06-01

The use of carbon monoxide (CO) and various packaging types has been suggested to improve/stabilise the colour and oxidative processes of red meats, thereby improving the retail value and revenue. The main aim of this study was to investigate the influence of packaging type and CO treatment on the colour and oxidative stability of tuna. The addition of CO significantly increased the redness (a(*) ) of the tuna steaks but the redness was not equally stable for all treatments. The aerobically packaged steaks showed a temporal decrease in redness while the redness of anaerobically packaged steaks remained relatively stable. The addition of CO did not significantly affect (P >0.05) the brownness (b(*) ) (with one exception) and lightness (L(*) ) of the steaks. The anaerobically packaged steaks showed a significant difference (P <0.05) in the b(*) values. No significant differences (P >0.05) in lipid or protein oxidation were observed between treatments. The aerobically packaged steaks had a significant temporal increase (P <0.05) in lipid oxidation while no such trend was apparent in the anaerobically packaged steaks. Protein oxidation remained relatively stable over time for both aerobically and anaerobically packaged steaks. Storing CO treated tuna steaks in anaerobic packaging can improve the oxidative and colour stability of tuna. Such treatment can reduce spoilage and wastage thereby potentially increasing revenue. © 2014 Society of Chemical Industry.

Effect of gamma-irradiation on frozen shrimps for decontamination of pathogenic bacteria

NASA Astrophysics Data System (ADS)

Ito, Hitoshi; Rashid, Harun Or; Sangthong, Naruemon; Adulyatham, Pitaya; Rattagool, Pongpen; Ishigaki, Isao

1993-07-01

Twelve samples of imported frozen shrimps were used in this study. The total aerobic bacteria were at 2 × 10 4 to 6 × 10 6 per gram. A few of Vibrio parahaemolyticus, V. mimicus, V. alginolyticus, V. vulnificus, V. fluvialis and Listeria monocytogenes were isolated from many samples. However, Salmonella was not detected in any of the samples. After exposure to 4-5 kGy of gamma-rays, the total aerobic bacteria in frozen shrimps were reduced by approximately 2-3 log cycles. The dose necessary to reduce the vibrio isolates and Aeromonas hydrophila at a level of below 10 -4 per gram was about 3 kGy in frozen shrimps, whereas about 3.5 kGy was required for L. monocytogenes and Salmonella typhimurium. In this study, unpleasant off-odor was clearly detected in the non-frozen shrimps irradiated at 2.5 kGy. On the other hand, off-odor was negligible in the frozen product below 5 kGy irradiation. No remarkable changes of peroxide values were also obtained up to 9 kGy of irradiation in the frozen shrimps. However peroxide values of non-frozen shrimps were clearly increased even irradiated at 4 kGy. Trimethylamine content was not changed at doses below 10 kGy in both of frozen and non-frozen shrimps. Shelf-life of defrosted shrimps were extended ca. 2 times under non-frozen market conditions.

Valorization of functional properties of extract and powder of olive leaves in raw and cooked minced beef meat.

PubMed

Aouidi, Fathia; Okba, Aicha; Hamdi, Moktar

2017-08-01

Olive leaves (OL), available in huge amounts from pruning, are known to be a useful source of biologically active compounds. This study investigated the potential application of OL as a supplement to minced beef meat in order to develop a functional product. The effect of OL extract or powder (100 and 150 µg phenols g -1 meat) on the quality and stability of raw and cooked meat during refrigerated storage was examined. Microwave drying at 600 W gave OL with the highest antioxidant quality (evaluated by TEAC/[phenols] (mg mg -1 ) and DPPH/[phenols] (mg mg -1 )) compared with other methods. OL showed an ability to inhibit (P < 0.05) lipid oxidation (TBARS values (mg MDA kg -1 ) were reduced by 25-65%) and myoglobin oxidation (metmyoglobin production was 43-65% in control samples and 14-35% in treated samples). OL also improved the technological quality of the meat, decreasing (P < 0.05) storage loss (%) and defrosting loss (%) without affecting cooking loss (%) and Napole yield (%). Sensory properties were not modified by the added ingredient at the tested levels (P < 0.05). OL (extract or powder) may have applications in the development of functional meat products of good technological quality that remain stable during storage. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Association of Vitamin E with Rapid Thawing on Goat Semen

PubMed Central

Penitente-Filho, Jurandy Mauro; Oliveira, Fabrício Albani; Jimenez, Carolina Rodriguez; Dias, Júlio César Oliveira; Oliveira, Gisele Dias; Silveira, Renata Gomes; Silveira, Camila Oliveira; Torres, Ciro Alexandre Alves

2014-01-01

The aim of this study was to evaluate the effects of vitamin E associated with rapid thawing on cryopreserved goat semen. Two bucks were used and eight ejaculates per animal were collected using artificial vagina. Semen was diluted with the following treatments: BIOXCELL (control), BIOXCELL + Equex (sodium lauryl sulphate) and BIOXCELL + vitamin E 100 μM. Semen was packaged into 0.25 mL straws and cooled at 5°C for 1 hour. Freezing was performed in liquid nitrogen vapor (−155°C) during 15 minutes. Then, the straws were immersed in liquid nitrogen (−196°C). Straws were thawed at 38°C/60 seconds or at 60°C/7 seconds with immediate sperm analysis. Hypoosmotic swelling test was performed adding a 20 μL aliquot of thawed semen to 1 mL of hypoosmotic solution (100 mOsm·Kg−1) followed by incubation during 60 minutes in water bath (38°C). Vitamin E did not affect any studied parameters (P > 0.05). Nevertheless, defrosting rate of 60°C/7 seconds improved sperm membrane functional integrity (P < 0.05). Current knowledge about goat semen cryopreservation is not sufficient to ensure high post-thawing recovery rates; thus, this study brings important data about using antioxidants and different thawing rates on cryopreservation process. PMID:24955428

A high-response transparent heater based on a CuS nanosheet film with superior mechanical flexibility and chemical stability.

PubMed

Xie, Shuyao; Li, Teng; Xu, Zijie; Wang, Yanan; Liu, Xiangyang; Guo, Wenxi

2018-04-05

Transparent heaters are widely used in technologies such as window defrosting/defogging, displays, gas sensing, and medical equipment. Apart from mechanical robustness and electrical and optical reliabilities, outstanding chemical stability is also critical to the application of transparent heaters. In this regard, we first present a highly flexible and large-area CuS transparent heater fabricated by a colloidal crackle pattern method with an optimized sheet resistance (Rs) as low as 21.5 Ω sq-1 at a ∼80% transmittance. The CuS transparent heater exhibits remarkable mechanical robustness during bending tests as well as high chemical stability against acid and alkali environments. In the application as a transparent heater, the CuS heater demonstrates a high thermal resistance of 197 °C W-1 cm2 with a fast switching time (<30 s), requiring low input voltages (<4.5 V) to achieve uniform temperatures of ∼110 °C across large areas. The temperature of the wearable CuS heater, which is stuck on the skin, can be real-time controlled through a Bluetooth device in a cell phone wirelessly. Based on the wireless control system, we demonstrated an application of the CuS heater in snow removal for solar panels. These CuS network TCEs with high flexibility, transparency, conductivity, and chemical stability could be widely used in wearable electronic products.

In vitro cultivation and cryopreservation of Babesia bigemina sporokinetes in hemocytes of Rhipicephalus microplus.

PubMed

de Rezende, Jania; Rangel, Charles P; McIntosh, Douglas; Silveira, Júlia A G; Cunha, Nathalie C; Ramos, Carlos A N; Fonseca, Adivaldo H

2015-09-15

Cultures of tick hemocytes represent alternative cell lines for the isolation and cultivation of a variety of hemoparasites. The present study reports the development and evaluation of methods for the in vitro culture and maintenance of sporokinetes of Babesia bigemina in association with hemocytes of the tick Rhipicephalus microplus. Hemolymph, from engorged females infected with B. bigemina sporokinetes, was incubated at 28 °C in L15 culture medium supplemented with 40% fetal bovine serum. Adherence of hemocytes to flask surfaces and the development of B. bigemina sporokinetes commenced on the first day of cultivation. The protozoa demonstrated clear motility and the capacity to adhere to hemocyte membranes for up to 25 days, at which time the hemocytes began to show signs of degeneration. Examination of Giemsa stained hemocyte cultures, revealed the presence of pyriformis forms, as well as mature and immature sporokinetes with dark red nuclei, centralized or near the apical extremities. Sporokinetes harvested from culture supernatants were cryopreserved in liquid nitrogen. Inoculation of parasite-free hemocyte cultures with defrosted sporokinetes, demonstrated the viability and interaction of the protozoa with the hemocytes over 21 days. Cultured hemocytes of R. microplus hold potential for development as a tool in the study of host parasite interactions and as a substrate for the in vitro maintenance of B. bigemina sporokinetes. Copyright © 2015 Elsevier B.V. All rights reserved.

Analysis of dark albedo features on a southern polar dune field of Mars.

PubMed

Horváth, András; Kereszturi, Akos; Bérczi, Szaniszló; Sik, András; Pócs, Tamás; Gánti, Tibor; Szathmáry, Eörs

2009-01-01

We observed 20-200 m sized low-albedo seepage-like streaks and their annual change on defrosting polar dunes in the southern hemisphere of Mars, based on the Mars Orbiter Camera (MOC), High Resolution Stereo Camera (HRSC), and High Resolution Imaging Science Experiment (HiRISE) images. The structures originate from dark spots and can be described as elongated or flowlike and, at places, branching streaks. They frequently have another spotlike structure at their end. Their overall appearance and the correlation between their morphometric parameters suggest that some material is transported downward from the spots and accumulates at the bottom of the dune's slopes. Here, we present possible scenarios for the origin of such streaks, including dry avalanche, liquid CO(2), liquid H(2)O, and gas-phase CO(2). Based on their morphology and the currently known surface conditions of Mars, no model interprets the streaks satisfactorily. The best interpretation of only the morphology and morphometric characteristics is only given by the model that implies some liquid water. The latest HiRISE images are also promising and suggest liquid flow. We suggest, with better knowledge of sub-ice temperatures that result from extended polar solar insolation and the heat insulator capacity of water vapor and water ice, future models and measurements may show that ephemeral water could appear and flow under the surface ice layer on the dunes today.

Anatomical study of minor alterations in neonate vocal folds.

PubMed

Silva, Adriano Rezende; Machado, Almiro José; Crespo, Agrício Nubiato

2014-01-01

Minor structural alterations of the vocal fold cover are frequent causes of voice abnormalities. They may be difficult to diagnose, and are expressed in different manners. Cases of intracordal cysts, sulcus vocalis, mucosal bridge, and laryngeal micro-diaphragm form the group of minor structural alterations of the vocal fold cover investigated in the present study. The etiopathogenesis and epidemiology of these alterations are poorly known. To evaluate the existence and anatomical characterization of minor structural alterations in the vocal folds of newborns. 56 larynxes excised from neonates of both genders were studied. They were examined fresh, or defrosted after conservation via freezing, under a microscope at magnifications of 25× and 40×. The vocal folds were inspected and palpated by two examiners, with the aim of finding minor structural alterations similar to those described classically, and other undetermined minor structural alterations. Larynges presenting abnormalities were submitted to histological examination. Six cases of abnormalities were found in different larynges: one (1.79%) compatible with a sulcus vocalis and five (8.93%) compatible with a laryngeal micro-diaphragm. No cases of cysts or mucosal bridges were found. The observed abnormalities had characteristics similar to those described in other age groups. Abnormalities similar to sulcus vocalis or micro-diaphragm may be present at birth. Copyright © 2014 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Sensitivity of Regional Climate to Deforestation in the Amazon Basin

NASA Technical Reports Server (NTRS)

Eltahir, Elfatih A. B.; Bras, Rafael L.

1994-01-01

The deforestation results in several adverse effect on the natural environment. The focus of this paper is on the effects of deforestation on land-surface processes and regional climate of the Amazon basin. In general, the effect of deforestation on climate are likely to depend on the scale of the defrosted area. In this study, we are interested in the effects due to deforestation of areas with a scale of about 250 km. Hence, a meso-scale climate model is used in performing numerical experiments on the sensitivity of regional climate to deforestation of areas with that size. It is found that deforestation results in less net surface radiation, less evaporation, less rainfall, and warmer surface temperature. The magnitude of the of the change in temperature is of the order 0.5 C, the magnitudes of the changes in the other variables are of the order of IO%. In order to verify some of he results of the numerical experiments, the model simulations of net surface radiation are compared to recent observations of net radiation over cleared and undisturbed forest in the Amazon. The results of the model and the observations agree in the following conclusion: the difference in net surface radiation between cleared and undisturbed forest is, almost, equally partioned between net solar radiation and net long-wave radiation. This finding contributes to our understanding of the basic physics in the deforestation problem.

Field Investigation of an Air-Source Cold Climate Heat Pump

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Bo; Abdelaziz, Omar; Rice, C Keith

In the U.S., there are approximately 2.6 million dwellings that use electricity for heating in cold and very cold regions with an annual energy consumption of 0.16 quads (0.17 EJ). A high performance cold climate heat pump (CCHP) would result in significant savings over current technologies (greater than 60% compared to electric resistance heating). We developed an air-source cold climate heat pump, which uses tandem compressors, with a single compressor rated for the building design cooling load, and running two compressors to provide, at -13 F (-25 C), 75% of rated heating capacity. The tandem compressors were optimized for heatingmore » operation and are able to tolerate discharge temperatures up to 280 F (138 C). A field investigation was conducted in the winter of 2015, in an occupied home in Ohio, USA. During the heating season, the seasonal COP was measured at 3.16, and the heat pump was able to operate down to -13 F (-25 C) and eliminate resistance heat use. The heat pump maintained an acceptable comfort level throughout the heating season. In comparison to a previous single-speed heat pump in the home, the CCHP demonstrated more than 40% energy savings in the peak heating load month. This paper illustrates the measured field performance, including compressor run time, frost/defrosting operations, distributions of building heating load and capacity delivery, comfort level, field measured COPs, etc.« less

Development and Evaluation of Photoprotective O/W Emulsions Containing Hydroalcoholic Extract of Neoglaziovia variegata (Bromeliaceae)

PubMed Central

Souza, Grasielly Rocha; Ferraz, Christiane Adrielly Alves; de Oliveira, Ana Paula; Araújo, Camila de Souza; de Lima-Saraiva, Sarah Raquel Gomes; Gonçalves, Talita Mota; Rolim-Neto, Pedro José; César, Francine Celise Siqueira

2017-01-01

Neoglaziovia variegata is a Bromeliaceae plant species widely found in Brazil with several pharmacological properties, including photoprotective activity. Although herbal-based active ingredients have been applied in cosmetic products, especially for skin treatment, its application in sunscreen formulations remains unexplored. The aim of this work is to evaluate the photoprotective effect of cosmetic formulations containing hydroalcoholic extract of N. variegata (Nv-HA). Initially, the phenolic and flavonoid total content of Nv-HA were determined. The photoprotective activity of Nv-HA was subsequently assessed using a spectrophotometric method. Nv-HA was incorporated in O/W emulsions in the presence or absence of synthetic filters and their photoprotective efficacy was evaluated by spectrophotometric SPF determination. Finally, the stability study of the formulations was performed through the freezing/defrosting method. Nv-HA showed significant phenolic and flavonoids content (61.66 ± 5.14 mg GAE/g and 90.27 ± 5.03 mg CE/g, resp.). Nv-HA showed SPF values of 5.43 ± 0.07 and 11.73 ± 0.04 for the concentrations of 0.5 and 1.0% (v/v), respectively. It was verified that Nv-HA potentiated the photoprotective effect of formulations containing only synthetic filters. Furthermore, the formulations have remained stable at the end of the preliminary stability study. According to the results, it was concluded that Nv-HA can be used as a chemical filter in cosmetic formulations. PMID:28680948

Development and Evaluation of Photoprotective O/W Emulsions Containing Hydroalcoholic Extract of Neoglaziovia variegata (Bromeliaceae).

PubMed

de Oliveira-Júnior, Raimundo Gonçalves; Souza, Grasielly Rocha; Ferraz, Christiane Adrielly Alves; de Oliveira, Ana Paula; Araújo, Camila de Souza; de Lima-Saraiva, Sarah Raquel Gomes; Reis, Silvio Alan Gonçalves Bomfim; Gonçalves, Talita Mota; Rolim, Larissa Araújo; Rolim-Neto, Pedro José; César, Francine Celise Siqueira; Almeida, Jackson Roberto Guedes da Silva

2017-01-01

Neoglaziovia variegata is a Bromeliaceae plant species widely found in Brazil with several pharmacological properties, including photoprotective activity. Although herbal-based active ingredients have been applied in cosmetic products, especially for skin treatment, its application in sunscreen formulations remains unexplored. The aim of this work is to evaluate the photoprotective effect of cosmetic formulations containing hydroalcoholic extract of N. variegata (Nv-HA). Initially, the phenolic and flavonoid total content of Nv-HA were determined. The photoprotective activity of Nv-HA was subsequently assessed using a spectrophotometric method. Nv-HA was incorporated in O/W emulsions in the presence or absence of synthetic filters and their photoprotective efficacy was evaluated by spectrophotometric SPF determination. Finally, the stability study of the formulations was performed through the freezing/defrosting method. Nv-HA showed significant phenolic and flavonoids content (61.66 ± 5.14 mg GAE/g and 90.27 ± 5.03 mg CE/g, resp.). Nv-HA showed SPF values of 5.43 ± 0.07 and 11.73 ± 0.04 for the concentrations of 0.5 and 1.0% (v/v), respectively. It was verified that Nv-HA potentiated the photoprotective effect of formulations containing only synthetic filters. Furthermore, the formulations have remained stable at the end of the preliminary stability study. According to the results, it was concluded that Nv-HA can be used as a chemical filter in cosmetic formulations.

Influence of the Fight BAC! food safety campaign on an urban Latino population in Connecticut.

PubMed

Dharod, Jigna Morarji; Perez-Escamilla, Rafael; Bermudez-Millan, Angela; Segura-Perez, Sofia; Damio, Grace

2004-01-01

To assess the coverage and consumer satisfaction with the Fight BAC! campaign and to evaluate the influence of the campaign on food safety knowledge, attitudes, and behaviors among a predominantly Latino population living in inner-city Hartford, Connecticut. A cross-sectional pre- and post-survey was administered to 500 Latino consumers in either English or Spanish. It included 30 food safety-related questions and information on the socioeconomic and demographic characteristics of participants. Respondents were selected from Latino households, with at least one child 12 years old or under, located in 5 predominantly Latino neighborhoods in inner-city Hartford. Fight BAC! media campaign. Seventy-three percent of respondents were exposed to at least one campaign media item and were highly satisfied with it. Recognition of the Fight BAC! logo increased from 10% to 42% between surveys (P <.001). Individuals exposed to the campaign were more likely to have a food safety knowledge score of at least 2 of a possible 4 compared with unexposed counterparts (odds ratio = 3.54; 95% CI 1.74-7.18; P <.001). They were also more likely to report defrosting meats in the refrigerator (14% vs 7%; P =.01). There was a dose-response association between the degree of campaign exposure and awareness of the term "cross-contamination." Social marketing campaigns that take advantage of multiple culturally relevant media channels are likely to improve food safety awareness and bring about changes in food safety knowledge and attitudes among Latino consumers.

Serum levels of iron in Sør-Varanger, Northern Norway--an iron mining municipality.

PubMed

Broderstad, Ann R; Smith-Sivertsen, Tone; Dahl, Inger Marie S; Ingebretsen, Ole Christian; Lund, Eiliv

2006-12-01

The purpose of this study was to investigate iron status in a population with a high proportion of miners in the northernmost part of Norway. Cross-sectional, population-based study performed in order to investigate possible health effects of pollution in the population living on both sides of the Norwegian-Russian border. All individuals living in the community of Sør-Varanger were invited for screening in 1994. In 2000, blood samples from 2949 participants (response rate 66.8 %), age range 30-69 years, were defrosted. S-ferritin and transferrin saturation were analysed in samples from 1548 women and 1401 men. About 30 % (n = 893) were employed in the iron mining industry, 476 of whom were miners and 417 had other tasks in the company. Type and duration of employment and time since last day of work at the company were used as indicators of exposure. Both s-ferritin levels and transferrin saturation were higher in men than in women. S-ferritin increased with increasing age in women, while the opposite was true for men. Iron deficiency occurred with higher frequencies in women (16 %) than in men (4 %). Iron overload was uncommon in both sexes. Adjustment for smoking and self-reported pulmonary diseases did not show any effect on iron levels. Miners had non-significant higher mean s-ferritin and transferrin saturation than non-miners. Neither duration, nor time since employment in the mine, had any impact on iron status. Our analyses did not show any associations between being a miner in the iron mining industry and serum iron levels compared to the general population.

TreeRipper web application: towards a fully automated optical tree recognition software.

PubMed

Hughes, Joseph

2011-05-20

Relationships between species, genes and genomes have been printed as trees for over a century. Whilst this may have been the best format for exchanging and sharing phylogenetic hypotheses during the 20th century, the worldwide web now provides faster and automated ways of transferring and sharing phylogenetic knowledge. However, novel software is needed to defrost these published phylogenies for the 21st century. TreeRipper is a simple website for the fully-automated recognition of multifurcating phylogenetic trees (http://linnaeus.zoology.gla.ac.uk/~jhughes/treeripper/). The program accepts a range of input image formats (PNG, JPG/JPEG or GIF). The underlying command line c++ program follows a number of cleaning steps to detect lines, remove node labels, patch-up broken lines and corners and detect line edges. The edge contour is then determined to detect the branch length, tip label positions and the topology of the tree. Optical Character Recognition (OCR) is used to convert the tip labels into text with the freely available tesseract-ocr software. 32% of images meeting the prerequisites for TreeRipper were successfully recognised, the largest tree had 115 leaves. Despite the diversity of ways phylogenies have been illustrated making the design of a fully automated tree recognition software difficult, TreeRipper is a step towards automating the digitization of past phylogenies. We also provide a dataset of 100 tree images and associated tree files for training and/or benchmarking future software. TreeRipper is an open source project licensed under the GNU General Public Licence v3.

Finding your innovation sweet spot.

PubMed

Goldenberg, Jacob; Horowitz, Roni; Levav, Amnon; Mazursky, David

2003-03-01

Most new product ideas are either uninspired or impractical. So how can developers hit the innovation sweet spot--far enough from existing products to attract real interest but close enough that they are feasible to make and market? They can apply five innovation patterns that manipulate existing components of a product and its immediate environment to come up with something both ingenious and viable, say the authors. The subtraction pattern works by removing product components, particularly those that seem desirable or indispensable. Think of the legless high chair that attaches to the kitchen table. The multiplication pattern makes one or more copies of an existing component, then alters those copies in some important way. For example, the Gillette double-bladed razor features a second blade that cuts whiskers at a slightly different angle. By dividing an existing product into its component parts--the division pattern--you can see something that was an integrated whole in an entirely different light. Think of the modern home stereo--it has modular speakers, tuners, and CD and tape players, which allow users to customize their sound systems. The task unification pattern involves assigning a new task to an existing product element or environmental attribute, thereby unifying two tasks in a single component. An example is the defrosting filament in an automobile windshield that also serves as a radio antenna. Finally, the attribute dependency pattern alters or creates the dependent relationships between a product and its environment. For example, by creating a dependent relationship between lens color and external lighting conditions, eyeglass developers came up with a lens that changes color when exposed to sunlight.

Effectiveness of a worker-worn electric-field sensor to detect power-line proximity and electrical-contact.

PubMed

Zeng, Shengke; Powers, John R; Newbraugh, Bradley H

2010-06-01

Construction workers suffer the most electrocutions among all industries. Currently, there are no electrical contact warning devices on the market to protect workers. This paper proposes a worker-worn electric-field sensor. As the worker is in proximity to, or in contact with, a live power-circuit, the sensor sets off an audible/visual warning alarm. The sensor also has the potential to wirelessly trip a wireless-capable circuit breaker, and to trigger a wireless transmitter to notify emergency response of an electrical contact. An experiment was conducted to measure electric-field variation on simulated human-wrists (10 defrosted hog-legs) in various proximities and in electrical-contact to a simulated power-circuit. The purpose of these tests was to determine the feasibility of developing a worker-worn electric-field detection sensor for use in protecting workers from contact with energized electrical conductors. This study observed a significant electric-field-magnitude increase as a hog-leg approaches the live-circuit, and the distinct electric-field-magnitude jump as the leg contacts with the live-circuit. The observation indicates that this sensor can be an effective device to warn the workers of electrical hazards. Additionally, the sensor has the potential to wirelessly trip a wireless-capable circuit-breaker and trigger a wireless transmitter (such as a cell phone) to notify an emergency response. The prompt notification prevents the worker from further injury caused by postponed medical-care. Widespread use of this sensor could lower electrocution and electrically related injury rates in the construction industry. (c) 2010 Elsevier Ltd. All rights reserved.

Hydronic Heating Coil Versus Propane Furnace, Rehoboth Beach, Delaware (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-01-01

Insight Homes constructed two houses in Rehoboth Beach, Delaware, with identical floor plans and thermal envelopes but different heating and domestic hot water (DHW) systems. Each house is 1,715-ft 2 with a single story, three bedrooms, two bathrooms, and the heating, ventilation, and air conditioning (HVAC) systems and ductwork located in conditioned crawlspaces. The standard house, which the builder offers as its standard production house, uses an air source heat pump (ASHP) with supplemental propane furnace heating. The Building America test house uses the same ASHP unit with supplemental heat provided by the DHW heater (a combined DHW and hydronicmore » heating system, where the hydronic heating element is in the air handler). Both houses were occupied during the test period. Results indicate that efficiency of the two heating systems was not significantly different. Three issues dominate these results; lower system design performance resulting from the indoor refrigerant coil selected for the standard house, an incorrectly functioning defrost cycle in the standard house, and the low resolution of the natural gas monitoring equipment. The thermal comfort of both houses fell outside the ASHRAE Standard 55 heating range but was within the ACCA room-to-room temperature range when compared to the thermostat temperature. The monitored DHW draw schedules were input into EnergyPlus to evaluate the efficiency of the tankless hot water heater model using the two monitored profiles and the Building America House Simulation Protocols. The results indicate that the simulation is not significantly impacted by the draw profiles.« less

Experimental investigation of the effect of air velocity on a unit cooler under frosting condition: a case study

NASA Astrophysics Data System (ADS)

Bayrak, Ergin; Çağlayan, Akın; Konukman, Alp Er S.

2017-10-01

Finned tube evaporators are used in a wide range of applications such as commercial and industrial cold/freezed storage rooms with high traffic loading under frosting conditions. In this case study, an evaporator with an integrated fan was manufactured and tested under frosting conditions by only changing the air flow rate in an ambient balanced type test laboratory compared to testing in a wind tunnel with a more uniform flow distribution in order to detect the effect of air flow rate on frosting. During the test, operation was performed separately based on three different air flow rates. The parameters concerning test operation such as the changes of air temperature, air relative humidity, surface temperature, air-side pressure drop and refrigerant side capacity etc. were followed in detail for each air flow rate. At the same time, digital images were captured in front of the evaporator; thus, frost thicknesses and blockage ratios at the course of fan stall were determined by using an image-processing technique. Consequently, the test and visual results showed that the trendline of air-side pressure drop increased slowly at the first stage of test operations, then increased linearly up to a top point and then the linearity was disrupted instantly. This point speculated the beginning of defrost operation for each case. In addition, despite detecting a velocity that needs to be avoided, a test applied at minimum air velocity is superior to providing minimum capacity in terms of loss of capacity during test operations.

Spring Defrosting of Mass-Movement Material at South High Latitudes

NASA Technical Reports Server (NTRS)

2003-01-01

Southern hemisphere spring on Mars will begin this year around May 6, 2003. During the spring, the MOC operations team will be documenting changes as the seasonal carbon dioxide frost cap retreats southward. In preparation for this year's southern spring, the team has been examining images obtained during the last southern spring, which occurred in 2001.

This pair of images shows gullies and associated scars formed by mass-movement down a slope in the south polar region. The first view, in mid-spring, was acquired in August 2001; it shows a terrain that is largely devoid of the frost that covered everything during winter. However, the aprons of debris from the mass-movements (landslides) are still frosted. By late spring, in the second picture (right), the frost on the aprons had finally sublimed away, and the debris was seen to be not much brighter than their surroundings. The second picture was taken in November 2001, about a week before the first day of summer.

The fact that the aprons of debris retained frost in mid-spring, whereas the surrounding terrain did not, probably indicates that the debris underlying the frost has different thermal properties than the surroundings. The debris might be more coarse-grained (sand or gravel, perhaps), and remained cooler in the daytime than the surrounding, dust-mantled surfaces.

The images are both illuminated from the bottom/lower right. North is toward the bottom, and the area imaged is located near 70.9oS, 339.3oW.

Physical state and temporal evolution of icy surfaces in the Mars South Pole

NASA Astrophysics Data System (ADS)

Douté, S.; Pilorget, C.

2017-09-01

On Mars H2O and CO2 ices can be found as seasonal or perennial deposits notably in the polar regions. Their bidirectional reflectance factor (BRF) is a tracer of their evolution which is still not completely understood. It is a key parameter for characterizing the composition and the physical state, as well as for calculating the bolometric albedo, the energy balance of the icy surfaces, and thus their impact on the martian climate. The BRF is potentially accessible thanks to the near-simultaneous multi-angle, hyperspectral observations of the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) implying 11 viewing angles in visible and infrared ranges. In previous research (Ceamanos2013, Doute2015) we put forward the Multi-angle Approach for Retrieval of Surface Reflectance from CRISM Observations (MARS-ReCO), an algorithm that characterizes and corrects the aerosol scattering effects. The aerosol optical depth (AOD) and the BRF of surface materials are retrieved conjointly and coherently as a function of wavelength. In this work, we apply MARS-ReCO on time series of CRISM sequences over different regions of interest in the outskirts of the south permanent polar cap. The time series span from mid-spring to late summer (Ls=210-320*) during which the CO2 ice sublimates sometimes revealing H2O frost and defrosted terrains. Thanks to the atmospheric correction, we are able to identify various classes of spectrophotometric behavior. We also note a regular increase of the directional-hemispherical surface albedo during the period of the time.

Modeling of Camembert-type cheese mass loss in a ripening chamber: main biological and physical phenomena.

PubMed

Hélias, A; Mirade, P-S; Corrieu, G

2007-11-01

A model of the mass loss of Camembert-type cheese was established with data obtained from 2 experimental ripening trials carried out in 2 pilot ripening chambers. During these experiments, a cheese was continuously weighed and the relative humidity, temperature, oxygen, and carbon dioxide concentrations in the ripening chamber were recorded online. The aim was to establish a simple but accurate model that would predict cheese mass changes according to available online measurements. The main hypotheses were that 1) the cheese water activity was constant during ripening, 2) the respiratory activity of the microflora played a major role by inducing heat production, combined with important water evaporation, 3) the temperature gradient existing inside the cheese was negligible, and the limiting phenomenon was the convective transfer. The water activity and the specific heat of the cheeses were assessed by offline measurements. The others parameters in the model were obtained from the literature. This dynamic model was built with 2 state variables: the cheese mass and the surface temperature of the cheese. In this way, only the heat transfer coefficient had to be fitted, and it was strongly determined by the airflow characteristics close to the cheeses. Model efficiency was illustrated by comparing the estimated and measured mass and the mass loss rate for the 2 studied runs; the relative errors were less than 1.9 and 3.2% for the mass loss and the mass loss rate, respectively. The dynamic effects of special events, such as room defrosting or changes in chamber relative humidity, were well described by the model, especially in terms of kinetics (mass loss rates).

The snowmaker: nature identical snow production in the laboratory

NASA Astrophysics Data System (ADS)

Schleef, S.; Jaggi, M.; Loewe, H.; Schneebeli, M.

2013-12-01

Using natural snow for laboratory experiments can be tricky due to shortage of winter periods and snowfall, difficulties of sample casting and transport, and the great variability of natural snow due to the varying conditions of crystal growth in the clouds. This hinders repeatable laboratory experiments with reproducible specimen and microstructural characteristics. To minimize experimental uncertainties we designed an improved machine called snowmaker, which enables us to produce nature-identical snow in a cold laboratory under well defined conditions. The snowmaker is based on well-known principles: warm humid air from a heated water basin is advected into a cold nucleation chamber where the vapor resublimates on stretched Nylon wires. Crystals are automatically harvested by a motor driven brush rack and collected in a box, thereby several kilograms of snow can be produced per day with minimum maintenance. The excess vapor is collected in a moisture trap to avoid frost in the laboratory. The entire construction is designed as a rolling, modular assembly system which can easily carried out of the laboratory for defrosting. In addition to previous attempts we focus on the reproducibility of the samples and the comparison to natural snow down to the microscale. We show that the settings of water temperature and cold laboratory temperature facilitates the production of different crystal shapes like dendrites and needles in a reproducible way. Besides photography, we analyzed the microstructure of snowmaker crystals in aggregated specimen by X-ray microtomography. Depending on the settings we can create reproducible samples with density of 50-170 kg/m3 and specific surface areas of 50-80 mm-1. We briefly touch similarities between artificial and natural snow samples with respect to crystal habit, microstructural parameters and short-time metamorphism.

Mars Polar Lander Site Surface Details

NASA Technical Reports Server (NTRS)

1999-01-01

This picture is an enlargement of a portion of a MOC image taken in late July 1999, showing the onset of defrosting of the seasonal carbon dioxide frost cap (small, occasionally fan-shaped dark spots seen throughout this image). Two craters are seen in this image, a very rare occurrence on the south polar layered deposits. Shown for comparison at the same scale is a picture of Jack Murphy (now Qualcomm) Stadium in San Diego, California. Clearly visible in the inset is the baseball diamond and pitcher's mound; less clear but certainly visible are a number of automobiles (small light dots) in the parking lot west (to the left) of the stadium. The elevation of the sun in the Mars image is about 10o; the sunlight is coming from the bottom (north) in this image. The shadow of the rims of the craters can be used to determine their depths. The smaller crater in the bottom right corner is about 60 m (197 feet) across and 7 m (23 feet) deep; the large crater just below the inset is 175 m (574 feet) across and 17 m (56 feet) deep. Similar calculations for other features in the images indicate that much of the surface is smooth and flat. Relief is typically much less than 1-2 meters (3-7 feet) in height over areas of 10-15 meters across (33-49 feet).

Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

The effect of Arabic gum on frozen dough properties and the sensory assessments of the bread produced.

PubMed

Tavakoli, Hamid Reza; Jonaidi Jafari, Nematollah; Hamedi, Hassan

2017-04-01

The use of hydrocolloids in frozen dough has become frequent as bread improvers due to their anti-staling effect. Nevertheless, the impact of both different frozen storage and Arabic gum level in non-prefermented flat dough with following thawing procedure have not been studied. This work intended to study the effect of three different ratio of Arabic gum on rheological properties of 1, 7, and 30 days of frozen storage and the quality of the bread made from. In order to gain the least detrimental effects on gluten network, we used rapid rate freezing and microwave heating in thawing stage. Rheological results showed that the unfrozen samples to which Arabic gum had been added rendered the highest resistance to extension. The resistance of gum fortified samples were less than fresh dough, however the decline was not significant in 3.0% Arabic gum dough kept in a month storage (p > .05). The similar findings were obtained for extensibility and adhesiveness; in which the maximum incorporation of Arabic gum lessen the destructive impact of long freezing storage. Addition of 3% gum could be able to retard staling through an increment in hydrophilic bonds between water molecules and amylose during thawing (p < .05). The overall rating of Arabic gum enriched samples was similar with bread made from non-frozen dough, even after 30 days of storage as indicated by the sensory evaluation of breads. Producing a chapatti-like fermented bread without long fermentation period. Formulation a frozen dough without using chemical additives. Introducing a proper use of a new defrosting method with the aim of achieving a better texture. Improvement in retarding staling by the use of Gum Arabic after 7 days. © 2016 Wiley Periodicals, Inc.

Evaluation of vaccine cold chain in urban health centers of municipal corporation of surat city, Western India.

PubMed

Naik, Ashish K; Rupani, Mihir P; Bansal, R K

2013-12-01

The success of immunization depends highly on the level of cold chain maintenance. The aim of the study was to assess the condition of cold chain equipment, practices adopted for cold chain maintenance and knowledge of the vaccinators. It was a cross-sectional study conducted in 20 UHCs of Surat Municipal Corporation (SMC). Cold chain equipment were observed with regards to their condition, along with the practices adopted by vaccinators for cold chain maintenance. A pre-designed and pre-tested questionnaire was used to interview the vaccinators regarding their knowledge and awareness regarding cold chain practices, management and handling. Data were entered and analyzed using Epi Info v 3.5.1. Simple proportions were calculated. Absence of separate stabilizer for deep freezers and ILRs (85%), ill-maintained temperature-record register, lack of criss-cross pattern of ice packs in deep freezer (65%), presence of things other than ice packs in deep freezer (10%) and things other than vaccines in ILR (10%) indicate poor cold chain maintenance. In addition to this, expired vaccines in ILR (5%), vaccines in the "unusable" stages of VVM (15%), lack of emergency contact number nearby in case of cold chain failure (85%), lack of inverter (85%), lack of generator (85%) and failure to note time of reconstitution on the vaccine vial at the time of vaccination (25%) indicate poor cold chain practices. Lack of knowledge of defrosting of ILR and deep freezer (45%), lack of knowledge about Shake test (40%), lack of knowledge of temperature range to be maintained in deep freezer (70%) and in ILR (15%) indicate poor knowledge of vaccinators. Cold chain maintenance and practices need improvement. Knowledge of vaccinators was overall unsatisfactory.

Dalmatian Terrain

NASA Technical Reports Server (NTRS)

2003-01-01

[figure removed for brevity, see original site]

Released 1 July 2003

An example of dalmatian terrain near the south pole. The bright material is polar ice and the dark spots dark sands that are appearing in depressions where the ice has defrosted to reveal underlying material. Interestingly, there is an almost continuous dark band around the edges of many of the depressions. This could be a clue to the nature of the sand deposits in polar regions. The sand forms dunes in a range of sizes and shapes. Near the top of the image the dunes shrink until they are smaller than the 18 m pixels of the THEMIS camera and seem to disappear into the surrounding ice.

Image information: VIS instrument. Latitude -66.6, Longitude 36 East (324 West). 19 meter/pixel resolution.

Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

Modelling transport phenomena in a multi-physics context

NASA Astrophysics Data System (ADS)

Marra, Francesco

2015-01-01

Innovative heating research on cooking, pasteurization/sterilization, defrosting, thawing and drying, often focuses on areas which include the assessment of processing time, evaluation of heating uniformity, studying the impact on quality attributes of the final product as well as considering the energy efficiency of these heating processes. During the last twenty years, so-called electro-heating-processes (radio-frequency - RF, microwaves - MW and ohmic - OH) gained a wide interest in industrial food processing and many applications using the above mentioned technologies have been developed with the aim of reducing processing time, improving process efficiency and, in many cases, the heating uniformity. In the area of innovative heating, electro-heating accounts for a considerable portion of both the scientific literature and commercial applications, which can be subdivided into either direct electro-heating (as in the case of OH heating) where electrical current is applied directly to the food or indirect electro-heating (e.g. MW and RF heating) where the electrical energy is firstly converted to electromagnetic radiation which subsequently generates heat within a product. New software packages, which make easier solution of PDEs based mathematical models, and new computers, capable of larger RAM and more efficient CPU performances, allowed an increasing interest about modelling transport phenomena in systems and processes - as the ones encountered in food processing - that can be complex in terms of geometry, composition, boundary conditions but also - as in the case of electro-heating assisted applications - in terms of interaction with other physical phenomena such as displacement of electric or magnetic field. This paper deals with the description of approaches used in modelling transport phenomena in a multi-physics context such as RF, MW and OH assisted heating.

Modelling transport phenomena in a multi-physics context

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marra, Francesco

2015-01-22

Innovative heating research on cooking, pasteurization/sterilization, defrosting, thawing and drying, often focuses on areas which include the assessment of processing time, evaluation of heating uniformity, studying the impact on quality attributes of the final product as well as considering the energy efficiency of these heating processes. During the last twenty years, so-called electro-heating-processes (radio-frequency - RF, microwaves - MW and ohmic - OH) gained a wide interest in industrial food processing and many applications using the above mentioned technologies have been developed with the aim of reducing processing time, improving process efficiency and, in many cases, the heating uniformity. Inmore » the area of innovative heating, electro-heating accounts for a considerable portion of both the scientific literature and commercial applications, which can be subdivided into either direct electro-heating (as in the case of OH heating) where electrical current is applied directly to the food or indirect electro-heating (e.g. MW and RF heating) where the electrical energy is firstly converted to electromagnetic radiation which subsequently generates heat within a product. New software packages, which make easier solution of PDEs based mathematical models, and new computers, capable of larger RAM and more efficient CPU performances, allowed an increasing interest about modelling transport phenomena in systems and processes - as the ones encountered in food processing - that can be complex in terms of geometry, composition, boundary conditions but also - as in the case of electro-heating assisted applications - in terms of interaction with other physical phenomena such as displacement of electric or magnetic field. This paper deals with the description of approaches used in modelling transport phenomena in a multi-physics context such as RF, MW and OH assisted heating.« less

  Ultrasonic monitoring of fish thawing process optimal time of thawing and effect of freezing/thawing.

PubMed

El Kadi, Youssef Ait; Moudden, Ali; Faiz, Bouazza; Maze, Gerard; Decultot, Dominique

2013-01-01

Fish quality is traditionally controlled by chemical and microbiological analysis. The non-destructive control presents an enormous professional interest thanks to the technical contribution and precision of the analysis to which it leads. This paper presents the results obtained from a characterisation of fish thaw-ing process by the ultrasonic technique, with monitoring thermal processing from frozen to defrosted states. The study was carried out on fish type red drum and salmon cut into fillets of 15 mm thickness. After being frozen at -20°C, the sample is enclosed in a plexiglas vessel with parallel walls at the ambient temperature 30°C and excited in perpendicular incidence at 0.5 MHz by an ultrasonic pulser-receiver Sofranel 5052PR. the technique of measurement consists to study the signals reflected by fish during its thawing, the specific techniques of signal processing are implemented to deduce informations characterizing the state of fish and its thawing process by examining the evolution of the position echoes reflected by the sample and the viscoelastic parameters of fish during its thawing. The obtained results show a relationship between the thermal state of fish and its acoustic properties, which allowed to deduce the optimal time of the first thawing in order to restrict the growth of microbial flora. For salmon, the results show a decrease of 36% of the time of the second thawing and an increase of 10.88% of the phase velocity, with a decrease of 65.5% of the peak-to-peak voltage of the signal reflected, thus a decrease of the acoustic impedance. This study shows an optimal time and an evolution rate of thawing specific to each type offish and a correlation between the acoustic behavior of fish and its thermal state which approves that this technique of ultrasonic monitoring can substitute the control using the destructive chemical analysis in order to monitor the thawing process and to know whether a fish has suffered an accidental thawing.

Meandering and material accumulation in the alcove on present day gully evolution

NASA Astrophysics Data System (ADS)

Pasquon, K.; Gargani, J.; Masse, M.; Vincendon, M.; Conway, S. J.; Séjourné, A.

2016-12-01

Since their first observation by Malin and Edgett (2000) [1], martian gullies have been abundantly studied, but their formation mechanism is still under debate [e.g. 2, 3, 4, 5, 6]. Gullies are generally composed of an alcove, a channel and an apron [1, 7] and some of them are active today [8]. Here, we show for the first time active martian meanders. This study was performed using HiRISE images at 25-30 cm/pix and 1 m/pix HiRISE elevation data. We found that this gully has been extremely active over the last 4 martian years. Each year, we observe an accumulation of material in the alcove and then its subsequent mobilisation - causing meander growth, extension of the channel, and growth of the debris apron. Over one martian year the debris apron expanded by almost 150 meters from an initial size of 900 meters. Two different pulses of activity are observed: 1) in the middle of winter when CO2 frost is still present and 2) at the beginning of spring when the seasonal defrosting is coming to an end. This phenomenon is observed on a moderate east-facing slope ( 13°). A correlation between seasonal frost and this gully could be consistent with its development timing. Laboratory experiments have been performed at low pressure to better constrain the potential range of processes involved in such seasonal mobilisation of material on Mars. [1] Malin and Edgett, 2000 Science 288, 2330-2335 ; [2] Costard et al.; 2002. Science 295, 110-113 ; [3] Treiman, 2003. J. Geophys. Res. Planets, 108 (E4), 8031; [4] Heldmann et al., 2005. J. Geophys. Res. Planets, 110 (E5), 004; [5] Hugenholtz et al., 2008. Icarus 197, 65-72 ; [6] Cedillo-Flores et al., 2011. Geophys. Res. Lett. 38, L21202; [7] Harrison et al., 2015. Icarus 252, 236-254; [8] Diniega et al., 2010. Geology 38, 1047-1050.

Seasonal evolution of the Martian cryptic region: influence of the atmospheric opacity

NASA Astrophysics Data System (ADS)

Portyankina, G.; Markiewicz, W. J.; Kossacki, K. J.

2005-08-01

Mars Orbiter Camera (MOC) performed repeated observations of chosen areas in polar regions to monitor seasonal and/or annual changes. Images E09-00028 and R08-01730 centered at 82.5°S, 41°E were taken in years 2001 and 2003 respectively. They show the same morphological features, however differ significantly in surface albedo, the image from 2001 shows a lower albedo than the one from 2003. Imaged areas lie inside the cryptic region and show spider patterns. The observed interannual variability may be related to the global dust storm that happened in 2001 and finished around Ls=230°, i.e. just before image E09-00028 was taken. Here we model the seasonal ice sublimation/condensation cycle to show that the evolution of this particular area of the cryptic region was affected by the dust storm during year 2001. The model used for the present work has been described in Kossacki and Markiewicz, (2004). It includes self-consistent treatment of the sublimation and condensation of CO2 and H2O ices, and was used to calculate surface temperatures and thicknesses of CO2 and H2O ice layers for the corresponding conditions of these two years. Our modelling shows that the dust storm lowered surface temperatures, and thus caused later than usual seasonal sublimation of both CO2 and water ices. It also considerably decreased surface albedo and these two important effects almost cancel: the solar flux is reduced during a dust storm but at the same time the dust that precipitates onto the surface reduces the albedo and thus allows a bigger fraction of the solar radiation to be absorbed. The surface temperature stays at about 146K for almost half of the Martian year, both during 2001 and 2003. We also considered impact of the surface roughness: it results in some smoothing of the average temperature rise that is associated with the defrosting of the surface.

The Demand Reduction Potential of Smart Appliances in U.S. Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makhmalbaf, Atefe; Srivastava, Viraj; Parker, Graham B.

The widespread deployment of demand respond (DR) enabled home appliances is expected to have significant reduction in the demand of electricity during peak hours. The work documented in this paper focuses on estimating the energy shift resulting from the installation of DR enabled smart appliances in the U.S. This estimation is based on analyzing the market for smart appliances and calculating the total energy demand that can potentially be shifted by DR control in appliances. Appliance operation is examined by considering their sub components individually to identify their energy consumptions and savings resulting from interrupting and shifting their load, e.g.,more » by delaying the refrigerator defrost cycle. In addition to major residential appliances, residential pool pumps are also included in this study given their energy consumption profiles that make them favorable for DR applications. In the market analysis study documented in this paper, the U.S. Energy Information Administration's (EIA) Residential Energy Consumption Survey (RECS) and National Association of Home Builders (NAHB) databases are used to examine the expected life of an appliance, the number of appliances installed in homes constructed in 10 year intervals after 1940 and home owner income. Conclusions about the effectiveness of the smart appliances in reducing electrical demand have been drawn and a ranking of appliances in terms of their contribution to load shift is presented. E.g., it was concluded that DR enabled water heaters result in the maximum load shift; whereas, dishwashers have the highest user elasticity and hence the highest potential for load shifting through DR. This work is part of a larger effort to bring novel home energy management concepts and technologies to reduce energy consumption, reduce peak electricity demand, integrate renewables and storage technology, and change homeowner behavior to manage and consume less energy and potentially save consumer energy costs.« less

Roche/BIOTECON Diagnostics LightCycler foodproof L. monocytogenes detection kit in combination with ShortPrep foodproof II Kit. Performance-Tested Method 070401.

PubMed

Junge, Benjamin; Berghof-Jäger, Kornelia

2006-01-01

A method was developed for the detection of L. monocytogenes in food based on real-time polymerase chain reaction (PCR). This advanced PCR method was designed to reduce the time needed to achieve results from PCR reactions and to enable the user to monitor the amplification of the PCR product simultaneously, in real-time. After DNA isolation using the Roche/BIOTECON Diagnostics ShortPrep foodproof II Kit (formerly called Listeria ShortPrep Kit) designed for the rapid preparation of L. monocytogenes DNA for direct use in PCR, the real-time detection of L. monocytogenes DNA is performed by using the Roche/BIOTECON Diagnostics LightCycler foodproof L. monocytogenes Detection Kit. This kit provides primers and hybridization probes for sequence-specific detection, convenient premixed reagents, and different controls for reliable interpretation of results. For repeatability studies, 20 different foods, covering the 15 food groups recommended from the AOAC Research Institute (AOAC RI) for L. monocytogenes detection were analyzed: raw meats, fresh produce/vegetables, processed meats, seafood, egg and egg products, dairy (cultured/noncultured), spices, dry foods, fruit/juices, uncooked pasta, nuts, confectionery, pet food, food dyes and colorings, and miscellaneous. From each food 20, samples were inoculated with a low level (1-10 colony-forming units (CFU)/25 g) and 20 samples with a high level (10-50 CFU/25 g) of L. monocytogenes. Additionally, 5 uninoculated samples were prepared from each food. The food samples were examined with the test kits and in correlation with the cultural methods according to U.S. Food and Drug Administration (FDA) Bacteriological Analytical Manual (BAM) or U.S. Department of Agriculture (USDA)/Food Safety and Inspection Service (FSIS) Microbiology Laboratory Guidebook. After 48 h of incubation, the PCR method in all cases showed equal or better results than the reference cultural FDA/BAM or USDA/FSIS methods. Fifteen out of 20 tested food types gave exactly the same amount of positive samples for both methods in both inoculation levels. For 5 out of 20 foodstuffs, the PCR method resulted in more positives than the reference method after 48 h of incubation. Following AOAC RI definition, these were false positives because they were not confirmed by the reference method (false-positive rate for low inoculated foodstuffs: 5.4%; for high inoculated foodstuffs: 7.1%). Without calculating these unconfirmed positives, the PCR method showed equal sensitivity results compared to the alternative method. With the unconfirmed PCR-positives included into the calculations, the alternative PCR method showed a higher sensitivity than the microbiological methods (low inoculation level: 100 vs 98.0%; sensitivity rate: 1; high inoculation level: 99.7 vs 97.7%; sensitivity rate, 1). All in-house and independently tested uninoculated food samples were negative for L. monocytogenes. The ruggedness testing of both ShortPrep foodproof II Kit and Roche/BIOTECON LightCycler foodproof L. monocytogenes Detection Kit showed no noteworthy influences to any variation of the parameters component concentration, apparatus comparison, tester comparison, and sample volumes. In total, 102 L. monocytogenes isolates (cultures and pure DNA) were tested and detected for the inclusivity study, including all isolates claimed by the AOAC RI. The exclusivity study included 60 non-L. monocytogenes bacteria. None of the tested isolates gave a false-positive result; specificity was 100%. Three different lots were tested in the lot-to-lot study. All 3 lots gave equal results. The stability study was subdivided into 3 parts: long-term study, stress test, and freeze-defrost test. Three lots were tested in 4 time intervals within a period of 13 months. They all gave comparable results for all test intervals. For the stress test, LightCycler L. monocytogenes detection mixes were stored at different temperatures and tested at different time points during 1 month. Stable results were produced at all storage temperatures. The freeze-defrost analysis showed no noteworthy aggravation of test results. The independent validation study examined by Campden and Chorleywood Food Research Association Group (CCFRA) demonstrated again that the LightCycler L. monocytogenes detection system shows a comparable sensitivity to reference methods. With both the LightCycler PCR and BAM methods, 19 out of 20 inoculated food samples were detected. The 24 h PCR results generated by the LightCycler system corresponded directly with the FDA/BAM culture results. However, the 48 h PCR results did not relate exactly to the FDA/BAM results, as one sample found to be positive by the 48 h PCR could not be culturally confirmed and another sample which was negative by the 48 h PCR was culturally positive.

Age of the Lava Creek supereruption and magma chamber assembly at Yellowstone based on 40Ar/39Ar and U-Pb dating of sanidine and zircon crystals

NASA Astrophysics Data System (ADS)

Vazquez, J. A.; Matthews, N. E.; Calvert, A. T.

2015-12-01

The last supereruption from the Yellowstone Plateau formed Yellowstone caldera and ejected the >1000 km3 of rhyolite that composes the Lava Creek Tuff (LCT). Tephra from the eruption blanketed much of the western United States, and is a key Quaternary chronostratigraphic marker, in particular for dating deposition of mid-Pleistocene glacial and pluvial deposits in western North America. We performed 40Ar/39Ar dating of single sanidines to delimit eruption age, and ion microprobe U-Pb and trace-element analyses of crystal faces on single zircons to characterize magmatic evolution and date near-eruption crystallization, as well as analyses of crystal interiors to date the interval of zircon crystallization. Sanidines from the two LCT members A and B yield an 40Ar/39Ar isochron date of 631 ± 4 ka (2σ). Crystal faces on zircons from both members yield a weighted mean 206Pb/238U date of 627 ± 6 ka (2σ) and have trace element concentrations that vary with eruptive stratigraphy. Zircon interiors yield a weighted mean 206Pb/238U date of 660 ± 6 ka, and reveal reverse and/or oscillatory zoning of trace element concentrations, with many crystals containing high-U concentrations and dark cathodoluminescence (CL) cores. These crystals with high-U cores are possibly sourced from 'defrosting' of melt-impregnated margins of the growing subvolcanic reservoir. LCT sanidines mirror the variation of zircon composition within the eruptive stratigraphy, with crystals from upper LCT-A and basal LCT-B having bright-CL rims with high Ba concentrations, suggesting late crystallization after addition of less evolved silicic magma. The occurrence of distal LCT in stratigraphic sequences marking the Marine Isotope Stage 16-15 transition supports the apparent eruption age of ca. 631 ka. These results reveal that Lava Creek zircons record episodic heating, renewed crystallization, and an overall up-temperature evolution for Yellowstone's subvolcanic reservoir in the 103-104 year interval before eruption.

The effects of residual platelets in plasma on plasminogen activator inhibitor-1 and plasminogen activator inhibitor-1-related assays.

PubMed

Pieters, Marlien; Barnard, Sunelle A; Loots, Du Toit; Rijken, Dingeman C

2017-01-01

Due to controversial evidence in the literature pertaining to the activity of plasminogen activator inhibitor-1 in platelets, we examined the effects of residual platelets present in plasma (a potential pre-analytical variable) on various plasminogen activator inhibitor-1 and plasminogen activator inhibitor-1-related assays. Blood samples were collected from 151 individuals and centrifuged at 352 and 1500 g to obtain plasma with varying numbers of platelet. In a follow-up study, blood samples were collected from an additional 23 individuals, from whom platelet-poor (2000 g), platelet-containing (352 g) and platelet-rich plasma (200 g) were prepared and analysed as fresh-frozen and after five defrost-refreeze cycles (to determine the contribution of in vitro platelet degradation). Plasminogen activator inhibitor-1 activity, plasminogen activator inhibitor-1 antigen, tissue plasminogen activator/plasminogen activator inhibitor-1 complex, plasma clot lysis time, β-thromboglobulin and plasma platelet count were analysed. Platelet α-granule release (plasma β-thromboglobulin) showed a significant association with plasminogen activator inhibitor-1 antigen levels but weak associations with plasminogen activator inhibitor-1 activity and a functional marker of fibrinolysis, clot lysis time. Upon dividing the study population into quartiles based on β-thromboglobulin levels, plasminogen activator inhibitor-1 antigen increased significantly across the quartiles while plasminogen activator inhibitor-1 activity and clot lysis time tended to increase in the 4th quartile only. In the follow-up study, plasma plasminogen activator inhibitor-1 antigen was also significantly influenced by platelet count in a concentration-dependent manner. Plasma plasminogen activator inhibitor-1 antigen levels increased further after complete platelet degradation. Residual platelets in plasma significantly influence plasma plasminogen activator inhibitor-1 antigen levels mainly through release of latent plasminogen activator inhibitor-1 with limited effects on plasminogen activator inhibitor-1 activity, tissue plasminogen activator/plasminogen activator inhibitor-1 complex or plasma clot lysis time. Platelets may however also have functional effects on plasma fibrinolytic potential in the presence of high platelet counts, such as in platelet-rich plasma.

Summer season variability of the north residual cap of Mars as observed by the Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES)

USGS Publications Warehouse

Calvin, W.M.; Titus, T.N.

2008-01-01

Previous observations have noted the change in albedo in a number of North Pole bright outliers and in the distribution of bright ice deposits between Mariner 9, Viking, and Mars Global Surveyor (MGS) data sets. Changes over the summer season as well as between regions at the same season (Ls) in different years have been observed. We used the bolometric albedo and brightness temperature channels of the Thermal Emission Spectrometer (TES) on the MGS spacecraft to monitor north polar residual ice cap variations between Mars years and within the summer season for three northern Martian summers between July 1999 and April 2003. Large-scale brightness variations are observed in four general areas: (1) the patchy outlying frost deposits from 90 to 270??E, 75 to 80??N; (2) the large "tail" below the Chasma Boreale and its associated plateau from 315 to 45??E, 80 to 85??N, that we call the "Boreale Tongue" and in Hyperboreae Undae; (3) the troughed terrain in the region from 0 to 120??E longitude (the lower right on a polar stereographic projection) we have called "Shackleton's Grooves" and (4) the unit mapped as residual ice in Olympia Planitia. We also note two areas which seem to persist as cool and bright throughout the summer and between Mars years. One is at the "source" of Chasma Boreale (???15??E, 85??N) dubbed "McMurdo", and the "Cool and Bright Anomaly (CABA)" noted by Kieffer and Titus 2001. TES Mapping of Mars' north seasonal cap. Icarus 154, 162-180] at ???330??E, 87??N called here "Vostok". Overall defrosting occurs early in the summer as the temperatures rise and then after the peak temperatures are reached (Ls???110) higher elevations and outlier bright deposits cold trap and re-accumulate new frost. Persistent bright areas are associated with either higher elevations or higher background albedos suggesting complex feedback mechanisms including cold-trapping of frost due to albedo and elevation effects, as well as influence of mesoscale atmospheric dynamics. ?? 2007 Elsevier Ltd. All rights reserved.

Solid-phase microextraction set-up for the analysis of liver volatolome to detect livestock exposure to micropollutants.

PubMed

Bouhlel, Jihéne; Ratel, Jérémy; Abouelkaram, Said; Mercier, Frédéric; Travel, Angelique; Baéza, Elisabeth; Jondreville, Catherine; Dervilly-Pinel, Gaud; Marchand, Philippe; Le Bizec, Bruno; Dubreil, Estelle; Mompelat, Sophie; Verdon, Eric; Inthavong, Chanthadary; Guérin, Thierry; Rutledge, Douglas N; Engel, Erwan

2017-05-12

Starting from a critical analysis of a first "proof of concept" study on the utility of the liver volatolome for detecting livestock exposure to environmental micropollutants (Berge et al., 2011), the primary aim of this paper is to improve extraction conditions so as to obtain more representative extracts by using an extraction temperature closer to livestock physiological conditions while minimizing analytical variability and maximizing Volatile Organic Compound (VOC) abundancies. Levers related to extraction conditions and sample preparation were assessed in the light of both abundance and coefficient of variation of 22 candidate VOC markers identified in earlier volatolomic studies. Starting with a CAR/PDMS fiber and a 30min extraction, the reduction of SPME temperature to 40°C resulted in a significant decrease in the area of 14 candidate VOC markers (p<0.05), mainly carbonyls and alcohols but also a reduction in the coefficient of variation for 17 of them. In order to restore VOC abundances and to minimize variability, two approaches dealing with sample preparation were investigated. By increasing sample defrosting time at 4°C from 0 to 24h yielded higher abundances and lower variabilities for 15 and 13 compounds, respectively. Lastly, by using additives favouring the release of VOCs (1.2g of NaCl) the sensitivity of the analysis was improved with a significant increase in VOC abundances of more than 50% for 13 out of the 22 candidate markers. The modified SPME parameters significantly enhanced the abundances while decreasing the analytical variability for most candidate VOC markers. The second step was to validate the ability of the revised SPME protocol to discriminate intentionally contaminated broiler chickens from controls, under case/control animal testing conditions. After verification of the contamination levels of the animals by national reference laboratories, data analysis by a multivariate chemometric method (Common Components and Specific Weights Analysis - ComDim) showed that the liver volatolome could reveal dietary exposure of broilers to a group of environmental pollutants (PCBs), a veterinary treatment (monensin), and a pesticide (deltamethrin), thus confirming the usefulness of this analytical set-up. Copyright © 2017 Elsevier B.V. All rights reserved.

Recycling and recharge processes at the Hasandağ Stratovolcano, Central Anatolia: Insights on magma chamber systematics from plagioclase textures and zoning patterns

NASA Astrophysics Data System (ADS)

Gall, H. D.; Cipar, J. H.; Crispin, K. L.; Kürkçüoğlu, B.; Furman, T.

2017-12-01

We elucidate crystal recycling and magma recharge processes at Hasandağ by investigating compositional zoning patterns and textural variation in plagioclase crystals from Quaternary basaltic andesite through dacite lavas. Previous work on Hasandağ intermediate compositions identified thermochemical disequilibrium features and showed abundant evidence for magma mixing1,2. We expand on this work through detailed micro-texture and mineral diffusion analysis to explore the mechanisms and timescales of crystal transport and mixing processes. Thermobarometric calculations constrain the plumbing system to 1.2-2 kbar and 850-950°C, corresponding to a felsic magma chamber at 4.5 km. Electron microprobe results reveal plagioclase phenocrysts from all lava types have common core (An33-46) and rim (An36-64) compositions, with groundmass laths (An57-67) resembling the phenocryst rims. Low An cores are ubiquitous, regardless of bulk rock chemistry, and suggest a consistent composition within the magma reservoir prior to high An rim growth. High An rims are regularly enriched in Mg, Fe, Ti and Sr, which we attribute to mafic recharge and magma mixing. We assess mixing timescales by inverse diffusion modeling of Mg profiles across the core-rim boundaries. Initial results suggest mixing to eruption processes occur on the order of days to months. Heterogeneous calculated timescales within thin sections indicate crystal populations with different growth histories. Crystals often display prominent sieve-textured zones just inside the rim, as well as other disequilibrium features such as oscillatory zoning or resorbed and patchy-zoned cores. We interpret these textures to indicate mobilization of a homogeneous dacitic reservoir with abundant An35 plagioclase crystals by frequent injection of mafic magma. Variability in observed textures and calculated timescales manifests during defrosting of a highly crystalline felsic mush, through different degrees of magma mixing. This process results in distinct crystal populations, some of which record punctuated ascent and storage, while others are erupted rapidly after the influx of new magma. Aydar, E., & Gourgaud, A. (1998). J. Volcanol. Geotherm. Res., 85(1), 129-152. Ustunisik, G., & Kilinc, A. (2011). Lithos, 125(3), 984-993.

Cellular bone matrices: viable stem cell-containing bone graft substitutes

PubMed Central

Skovrlj, Branko; Guzman, Javier Z.; Al Maaieh, Motasem; Cho, Samuel K.; Iatridis, James C.; Qureshi, Sheeraz A.

2015-01-01

BACKGROUND CONTEXT Advances in the field of stem cell technology have stimulated the development and increased use of allogenic bone grafts containing live mesenchymal stem cells (MSCs), also known as cellular bone matrices (CBMs). It is estimated that CBMs comprise greater than 17% of all bone grafts and bone graft substitutes used. PURPOSE To critically evaluate CBMs, specifically their technical specifications, existing published data supporting their use, US Food and Drug Administration (FDA) regulation, cost, potential pitfalls, and other aspects pertaining to their use. STUDY DESIGN Areview of literature. METHODS A series of Ovid, Medline, and Pubmed-National Library of Medicine/National Institutes of Health (www.ncbi.nlm.nih.gov) searches were performed. Only articles in English journals or published with English language translations were included. Level of evidence of the selected articles was assessed. Specific technical information on each CBM was obtained by direct communication from the companies marketing the individual products. RESULTS Five different CBMs are currently available for use in spinal fusion surgery. There is a wide variation between the products with regard to the average donor age at harvest, total cellular concentration, percentage of MSCs, shelf life, and cell viability after defrosting. Three retrospective studies evaluating CBMs and fusion have shown fusion rates ranging from 90.2% to 92.3%, and multiple industry-sponsored trials are underway. No independent studies evaluating spinal fusion rates with the use of CBMs exist. All the commercially available CBMs claim to meet the FDA criteria under Section 361, 21 CFR Part 1271, and are not undergoing FDA premarket review. The CBMs claim to provide viable MSCs and are offered at a premium cost. Numerous challenges exist in regard to MSCs’ survival, function, osteoblastic potential, and cytokine production once implanted into the intended host. CONCLUSIONS Cellular bone matrices may be a promising bone augmentation technology in spinal fusion surgery. Although CBMs appear to be safe for use as bone graft substitutes, their efficacy in spinal fusion surgery remains highly inconclusive. Large, nonindustry sponsored studies evaluating the efficacy of CBMs are required. Without results from such studies, surgeons must be made aware of the potential pitfalls of CBMs in spinal fusion surgery. With the currently available data, there is insufficient evidence to support the use of CBMs as bone graft substitutes in spinal fusion surgery. PMID:24929059

Cellular bone matrices: viable stem cell-containing bone graft substitutes.

PubMed

Skovrlj, Branko; Guzman, Javier Z; Al Maaieh, Motasem; Cho, Samuel K; Iatridis, James C; Qureshi, Sheeraz A

2014-11-01

Advances in the field of stem cell technology have stimulated the development and increased use of allogenic bone grafts containing live mesenchymal stem cells (MSCs), also known as cellular bone matrices (CBMs). It is estimated that CBMs comprise greater than 17% of all bone grafts and bone graft substitutes used. To critically evaluate CBMs, specifically their technical specifications, existing published data supporting their use, US Food and Drug Administration (FDA) regulation, cost, potential pitfalls, and other aspects pertaining to their use. Areview of literature. A series of Ovid, Medline, and Pubmed-National Library of Medicine/National Institutes of Health (www.ncbi.nlm.nih.gov) searches were performed. Only articles in English journals or published with English language translations were included. Level of evidence of the selected articles was assessed. Specific technical information on each CBM was obtained by direct communication from the companies marketing the individual products. Five different CBMs are currently available for use in spinal fusion surgery. There is a wide variation between the products with regard to the average donor age at harvest, total cellular concentration, percentage of MSCs, shelf life, and cell viability after defrosting. Three retrospective studies evaluating CBMs and fusion have shown fusion rates ranging from 90.2% to 92.3%, and multiple industry-sponsored trials are underway. No independent studies evaluating spinal fusion rates with the use of CBMs exist. All the commercially available CBMs claim to meet the FDA criteria under Section 361, 21 CFR Part 1271, and are not undergoing FDA premarket review. The CBMs claim to provide viable MSCs and are offered at a premium cost. Numerous challenges exist in regard to MSCs' survival, function, osteoblastic potential, and cytokine production once implanted into the intended host. Cellular bone matrices may be a promising bone augmentation technology in spinal fusion surgery. Although CBMs appear to be safe for use as bone graft substitutes, their efficacy in spinal fusion surgery remains highly inconclusive. Large, nonindustry sponsored studies evaluating the efficacy of CBMs are required. Without results from such studies, surgeons must be made aware of the potential pitfalls of CBMs in spinal fusion surgery. With the currently available data, there is insufficient evidence to support the use of CBMs as bone graft substitutes in spinal fusion surgery. Copyright © 2014 Elsevier Inc. All rights reserved.

Variability of the martian seasonal CO2 cap extent over eight Mars Years

NASA Astrophysics Data System (ADS)

Piqueux, Sylvain; Kleinböhl, Armin; Hayne, Paul O.; Kass, David M.; Schofield, John T.; McCleese, Daniel J.

2015-05-01

We present eight Mars Years of nearly continuous tracking of the CO2 seasonal cap edges from Mars Year (MY) 24 to 31 using Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES) and Mars Reconnaissance Orbiter (MRO) Mars Climate Sounder (MCS) thermal infrared data. Spatial and temporal resolutions are 1 pixel per degree and 10°Ls (aerocentric longitude of the Sun). The seasonal caps are defined as the regions where the diurnal radiometric temperature variations at ∼32 μm wavelength do not exceed 5 K. With this definition, terrains with small areal fraction of defrosted regolith able to experience measurable diurnal temperature cycles are not mapped as part of the cap. This technique is adequate to distinguish CO2 from H2O ices, and effective during the polar night or under low illumination conditions. The present analysis answers outstanding questions stemming from fragmented observations at visible wavelengths: (1) the previously sparsely documented growth of the North seasonal caps (160° < Ls < 270°) is shown to be repeatable within 1-2° equivalent latitude, and monotonic over the MY 24-31 time period; high repeatability is observed during the retreat of the caps in non-dusty years (∼1° or less equivalent latitude); (2) the MY 25 storm does not seem to have impacted the growth rate, maximal extents, or recession rate of the North seasonal caps, whereas the MY 28 dust storm clearly sped up the recession of the cap (∼2° smaller on average after the storm, during the recession, compared to other years); (3) during non-dusty years, the growth of the South seasonal cap (350° < Ls < 100°) presents noticeable variability (up to ∼4° equivalent latitude near Ls = 20°) with a maximum extent reached near Ls = 90°; (4) the retreat of the Southern seasonal cap (100° < Ls < 310°) exhibits large inter-annual variability, especially near 190° < Ls < 220°; (5) the recession of the MY 25 South seasonal cap is significantly accelerated during the equinox global dust storm, with surface temperatures suggesting increased patchiness or enhanced dust mantling on the CO2 ice. These results suggest that atmospheric temperatures and dust loading are the primary source of variability in an otherwise remarkably repeatable cycle of seasonal cap growth and recession.

Investigation of the Active layer thickness and ground subsidence in Taimyr

NASA Astrophysics Data System (ADS)

Grebenets, V. I.; Tolmanov, V. A.; Streletskiy, D. A.

2017-12-01

The active layer of permafrost (ALT) is highly unstable and dynamic in space and time. Soil undergoes frost heave during the freezing process, and ground subsidence during the thawing. The problem of the development of soil sediments' deformations in ALT is relevant as for natural objects (influence on runoff, changing of landscape and vegetation, etc.), so for industrial infrastructure (pipelines, roads, buildings and structures). The observations in the frame of the CALM program in Taimyr were carried out since 2005 (site R-32) with the measurements of the geodetic level of soil surface since 2007. The results of these measurements were processed and the maps of thawing and changes in meso- and micro-relief were constructed. The differentiation of seasonally thawed layer and ground subsidence in different micro-landscape conditions was investigated. The depth of seasonal thawing and the changes of surface movements were found to be determined by three main systems: a) the weather conditions and the climate trends; b) the permafrost-lithological conditions and drainage; c) the micro-landscape characteristics. It was established that for the Norilsk region (Taimyr) the trend in increasing ALT was 0.3 cm / year (for the period of observations 2005-2016) with a certain slowdown in the last 3 to 4 years. Increase in the depth of the ALT was related to the rising Summer temperatures and reduction of the cold period. A strong high impact of the summer precipitation conditions was revealed: in rather cold summer of 2012, with large amount of precipitation mainly in the warmest month (July), the defrosting was the highest. In the year with the record-breaking number of positive degree days (from all the 85 years of regular meteorological observations) but anomalously dry year 2013 (in July - less than 10 mm atmospheric precipitation), the thawing was minimal at the R-32 site. It is interesting that the ground subsidence in 2012 was 30-40% less, than in 2013. This is due to the water saturation of the system, since water is practically incompressible. The maximum thawing and the ground subsidence are found in negative forms of relief. Differences in depths of the seasonally thawed layer and in change of the surface level within different landscapes can reach 50-70%.

Species detection using HyBeacon(®) probe technology: Working towards rapid onsite testing in non-human forensic and food authentication applications.

PubMed

Dawnay, Nick; Hughes, Rebecca; Court, Denise Syndercombe; Duxbury, Nicola

2016-01-01

Identifying individual species or determining species' composition in an unknown sample is important for a variety of forensic applications. Food authentication, monitoring illegal trade in endangered species, forensic entomology, sexual assault case work and counter terrorism are just some of the fields that can require the detection of the biological species present. Traditional laboratory based approaches employ a wide variety of tools and technologies and exploit a number of different species specific traits including morphology, molecular differences and immuno-chemical analyses. A large number of these approaches require laboratory based apparatus and results can take a number of days to be returned to investigating authorities. Having a presumptive test for rapid identification could lead to savings in terms of cost and time and allow sample prioritisation if confirmatory testing in a laboratory is required later. This model study describes the development of an assay using a single HyBeacon(®) probe and melt curve analyses allowing rapid screening and authentication of food products labelled as Atlantic cod (Gadus morhua). Exploiting melt curve detection of species specific SNP sites on the COI gene the test allows detection of a target species (Atlantic cod) and closely related species which may be used as substitutes. The assay has been designed for use with the Field Portable ParaDNA system, a molecular detection platform for non-expert users. The entire process from sampling to result takes approximately 75min. Validation studies were performed on both single source genomic DNA, mixed genomic DNA and commercial samples. Data suggests the assay has a lower limit of detection of 31 pg DNA. The specificity of the assay to Atlantic cod was measured by testing highly processed food samples including frozen, defrosted and cooked fish fillets as well as fish fingers, battered fish fillet and fish pie. Ninety-six (92.7%) of all Atlantic cod food products, tested, provided a correct single species result with the remaining samples erroneously identified as containing non-target species. The data shows that the assay was quick to design and characterise and is also capable of yielding results that would be beneficial in a variety of fields, not least the authentication of food. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Laboratory experimental investigation of heat transport in fractured media

NASA Astrophysics Data System (ADS)

Cherubini, Claudia; Pastore, Nicola; Giasi, Concetta I.; Allegretti, Nicoletta Maria

2017-01-01

Low enthalpy geothermal energy is a renewable resource that is still underexploited nowadays in relation to its potential for development in society worldwide. Most of its applications have already been investigated, such as heating and cooling of private and public buildings, road defrosting, cooling of industrial processes, food drying systems or desalination. Geothermal power development is a long, risky and expensive process. It basically consists of successive development stages aimed at locating the resources (exploration), confirming the power generating capacity of the reservoir (confirmation) and building the power plant and associated structures (site development). Different factors intervene in influencing the length, difficulty and materials required for these phases, thereby affecting their cost. One of the major limitations related to the installation of low enthalpy geothermal power plants regards the initial development steps that are risky and the upfront capital costs that are huge. Most of the total cost of geothermal power is related to the reimbursement of invested capital and associated returns. In order to increase the optimal efficiency of installations which use groundwater as a geothermal resource, flow and heat transport dynamics in aquifers need to be well characterized. Especially in fractured rock aquifers these processes represent critical elements that are not well known. Therefore there is a tendency to oversize geothermal plants. In the literature there are very few studies on heat transport, especially on fractured media. This study is aimed at deepening the understanding of this topic through heat transport experiments in fractured networks and their interpretation. Heat transfer tests have been carried out on the experimental apparatus previously employed to perform flow and tracer transport experiments, which has been modified in order to analyze heat transport dynamics in a network of fractures. In order to model the obtained thermal breakthrough curves, the Explicit Network Model (ENM) has been used, which is based on an adaptation of Tang's solution for the transport of the solutes in a semi-infinite single fracture embedded in a porous matrix. Parameter estimation, time moment analysis, tailing character and other dimensionless parameters have permitted a better understanding of the dynamics of heat transport and the efficiency of heat exchange between the fractures and the matrix. The results have been compared with the previous experimental studies on solute transport.

Tuning Wettability and Adhesion of Structured Surfaces

NASA Astrophysics Data System (ADS)

Badge, Ila

Structured surfaces with feature size ranging from a few micrometers down to nanometers are of great interest in the applications such as design of anti-wetting surfaces, tissue engineering, microfluidics, filtration, microelectronic devices, anti-reflective coatings and reversible adhesives. A specific surface property demands particular roughness geometry along with suitable surface chemistry. Plasma Enhanced Chemical Vapor Deposition (PECVD) is a technique that offers control over surface chemistry without significantly affecting the roughness and thus, provides a flexibility to alter surface chemistry selectively for a given structured surface. In this study, we have used PECVD to fine tune wetting and adhesion properties. The research presented focuses on material design aspects as well as the fundamental understanding of wetting and adhesion phenomena of structured surfaces. In order to study the effect of surface roughness and surface chemistry on the surface wettability independently, we developed a model surface by combination of colloidal lithography and PECVD. A systematically controlled hierarchical roughness using spherical colloidal particles and surface chemistry allowed for quantitative prediction of contact angles corresponding to metastable and stable wetting states. A well-defined roughness and chemical composition of the surface enabled establishing a correlation between theory predictions and experimental measurements. We developed an extremely robust superhydrophobic surface based on Carbon-Nanotubes (CNT) mats. The surface of CNTs forming a nano-porous mesh was modified using PECVD to deposit a layer of hydrophobic coating (PCNT). The PCNT surface thus formed is superhydrophobic with almost zero contact angle hysteresis. We demonstrated that the PCNT surface is not wetted under steam condensation even after prolonged exposure and also continues to retain its superhydrophobicity after multiple frosting-defrosting cycles. The anti-wetting behavior of PCNT surface is consistent with our model predictions, derived based on thermodynamic theory of wetting. The surface of gecko feet is a very unique natural structured surface. The hierarchical surface structure of a Gecko toe pad is responsible for its reversible adhesive properties and superhydrophobicity. van der Waals interactions is known to be the key mechanism behind Gecko adhesion. However, we found that the wettability, thus the surface chemistry plays a significant role in Gecko adhesion mechanism, especially in the case of underwater adhesion. We used PECVD process to deposit a layer of coating with known chemistry on the surface of sheds of gecko toes to study the effect that wettability of the toe surface has on its adhesion. In summary, we demonstrated that PECVD can be effectively used as means of surface chemistry control for tunable structure-property relationship of three types of structured surfaces; each having unique surface features.

Optimized autonomous operations of a 20 K space hydrogen sorption cryocooler

NASA Astrophysics Data System (ADS)

Borders, J.; Morgante, G.; Prina, M.; Pearson, D.; Bhandari, P.

2004-06-01

A fully redundant hydrogen sorption cryocooler is being developed for the European Space Agency Planck mission, dedicated to the measurement of the temperature anisotropies of the cosmic microwave background radiation with unprecedented sensitivity and resolution [Advances in Cryogenic Engineering 45A (2000) 499]. In order to achieve this ambitious scientific task, this cooler is required to provide a stable temperature reference (˜20 K) and appropriate cooling (˜1 W) to the two instruments on-board, with a flight operational lifetime of 18 months. During mission operations, communication with the spacecraft will be possible in a restricted time-window, not longer than 2 h/day. This implies the need for an operations control structure with the required robustness to safely perform autonomous procedures. The cooler performance depends on many operating parameters (such as the temperatures of the pre-cooling stages and the warm radiator), therefore the operation control system needs the capability to adapt to variations of these boundary conditions, while maintaining safe operating procedures. An engineering bread board (EBB) cooler was assembled and tested to evaluate the behavior of the system under conditions simulating flight operations and the test data were used to refine and improve the operation control software. In order to minimize scientific data loss, the cooler is required to detect all possible failure modes and to autonomously react to them by taking the appropriate action in a rapid fashion. Various procedures and schemes both general and specific in nature were developed, tested and implemented to achieve these goals. In general, the robustness to malfunctions was increased by implementing an automatic classification of anomalies in different levels relative to the seriousness of the error. The response is therefore proportional to the failure level. Specifically, the start-up sequence duration was significantly reduced, allowing a much faster activation of the system, particularly useful in case of restarts after inadvertent shutdowns arising from malfunctions in the spacecraft. The capacity of the system to detect J-T plugs was increased to the point that the cooler is able to autonomously identify actual contaminants clogging from gas flow reductions due to off-nominal operating conditions. Once a plug is confirmed, the software autonomously energizes, and subsequently turns off, a J-T defrost heater until the clog is removed, bringing the system back to normal operating conditions. In this paper, all the cooler Operational Modes are presented, together with the description of the logic structure of the procedures and the advantages they produce for the operations.

Present-Day Surface Changes on Mars: Implications for Recent Climate Variability and Habitability

NASA Astrophysics Data System (ADS)

McEwen, A. S.; Dundas, C. M.; Diniega, S.; Byrne, S.; Bridges, N. T.; Hansen, C. J.

2012-12-01

With the high-resolution and repeat-image capability of MRO/HiRISE, we have been documenting present-day surface activity. This activity includes seasonal defrosting (spots, fans, etc.), changes in polar deposits, new impacts, migrating sand dunes, enlargement of gullies, and a variety of slope flows. What does this tell us about possible environmental change and habitability? Perhaps the key result is that previous suggestions of recent climate change on Mars may have been somewhat exaggerated. One such suggestion is that the enlargement of pits in the south polar residual cap indicates present-day global warming. However, recent models of continuous sublimation and redeposition of the CO2 predict a suite of landforms that have been observed to exist today (Byrne, 2009, AREPS 37, 535). Another suggestion is that mid-latitude gullies formed by melting snow or shallow ice after a recent period of high obliquity, but HiRISE observations have shown rapid and widespread gully activity in the present climate (Diniega et al., 2010, Geology 38, 1047; Dundas et al., 2012, Icarus 220, 124; Dundas et al., this conference). Likewise, suggestions that Mars needed a significantly higher atmospheric density to explain the presence of well-preserved sand dunes have been countered by observations of widespread current activity (Bridges et al., 2012, Geology 40, 31; Bridges et al., 2012, Nature 485, 339). These observations do not rule out significantly different past climate conditions but do suggest that their effects were less pronounced, at least in recent times. There are features that do not appear active today; one example is the transverse aeolian ridges. Also, the mid-latitude icy lobate flows and ice-rich mantles have not shown current activity, appear to have partially sublimated, and are likely remnants of recent past climates. Ground ice excavated by new craters is observed closer to the equator than predicted for the present atmospheric water vapor content, but consistent with expected conditions from the recent past (Byrne et al., 2009, Science 325, 1674). This clean subsurface ice (also found by the Phoenix mission) may require thin films of liquid water to form; this habitable niche may abruptly appear and disappear (as ice comes and goes) in response to climate change if microbes could survive the dry oxidizing periods. Another form of activity that might be linked to present-day habitability is the Recurring Slope Lineae (RSL; McEwen et al., 2011, Science 333, 740), but we have not yet been able to assess how this activity may have varied over time.

Assessment of Continuous Resistivity Profiling for the Characterization of Paved Roads

NASA Astrophysics Data System (ADS)

Chouteau, M.; Vallieres, S.; Miralles, M.

2004-05-01

We have assessed the continuous resistivity profiling method using towed arrays as a diagnostic NDT method for the evaluation of pavements. Whether the pavement consists of a sequence of asphalt, concrete slab and subgrade layer (rigid pavement) or a layer of asphalt overlying a subgrade and grade base layers (flexible pavement) defects within those different layers can cause pavement deterioration that must be identified. We first examine the response of the method to the various problems using numerical modeling. It is shown that with an optimally designed system the method allows the determination of the thickness and the location of cracks in the asphalt cover. It is also sensitive to the presence of cracks, internal defects and chloride ions (de-icing salt) within the concrete slab below. For reinforced concrete it is possible to estimate the concrete resistivity related directly to its composition (quality) and the thickness of the top coating over the level of rebars. A low resistivity of concrete will usually be diagnostic of advanced stage of rebar corrosion and delamination could occur. However it is shown that the rebars cause current channeling and the depth of investigation is limited then to the depth of the first row of rebars. Finally heterogeneities within the foundation reflecting subsidence, bad drainage, frost-defrost cycles or cavities can be mapped. The optimal design is based on a system with 10 to 20 receiver dipoles and one transmitter dipole (first or last of the array) with a dipole length typically of 10 cm that can be used in equatorial or in-line mode. Static resistivity measurements have been carried out at the laboratory scale over concrete slabs built to verify results obtained from the numerical modeling. Observed data fit very well the modeled data and validate the overall conclusions. Tests have been performed in December 2003 in some selected streets (6 visited, 3 re-visited) of Montreal using a CORIM system (Iris Instruments, France), a capacitively-coupled resistivity towed equatorial array that continuously record data collected with six receiver dipoles and one transmitter dipole. Typical acquisition sampling and velocity were 0,20-0,50 m and 1 to 2 km/h respectively. Although the system is not optimally designed for the applications described above it provides useful diagnostic information about the state of deterioration of pavement. Data have been imaged using 2D resistivity inversion. In general it shows a high resistivity for the shallow depth related to the asphalt layer and a decreasing resistivity with depth related to the concrete slab first and the granular foundation below. Lateral variations appear to be correlated with degradation of the concrete slab.

The Assembly and Emplacement of the Mushy Magma Model: A Historical Perspective

NASA Astrophysics Data System (ADS)

Bergantz, G. W.

2012-12-01

The "mush model" for magmatic systems has emerged as an alternative to the classic notion of a silicate liquid dominated reservoir, the so-called big tank model. The mush model is motivated by a concurrence of geochemical, geophysical and geological observations and new ideas on multiphase fluid dynamics. This presentation will review the historical development and remaining open questions about the mush model as it pertains to silicic systems. The observation that rhyolites have extreme depletions in Sr, Ba and Eu, as well as depletions in Zr and LREE, precluded an origin by direct crustal melting, instead requiring crystallization differentiation. This initially motivated the sidewall crystallization model, where less dense, evolved liquid originated and percolated upwards through a crystal-rich boundary zone, adjacent to a liquid dominated reservoir. The 'defrosting' or remobilization of this sidewall was proposed as a mechanism for producing complex temporal signatures in erupted suites, and this notion later found additional support in the recognition of so-called 'antecrysts.' Lab bench scale tank models of crystallizing salt solutions were offered as analogs for these boundary layer driven magmatic systems. However, it was recognized that features of this boundary layer model that did not agree with seismic, gravity and magnetotelluric, and geological observations. Seismic studies of silicic systems typically indicate P-wave velocity anomalies of 15% or greater for both shallow and deeper systems. But they do not show velocity anomalies that would indicate substantial regions of pure liquid in the core. Rather, the geophysical anomalies, are consistent with a with a spatially extensive crystal mush with an overlying thin melt lens. In addition the observation that erupted crystal poor liquids abruptly transition into crystal rich magmas with interstitial liquid compositions that are nearly identical to the crystal poor ones, provides evidence of a geometrical and source relationship between crystal poor and subjacent crystal rich mush. Lastly, it was appreciated that the boundary layer fluid dynamic models lacked geological verisimilitude, and invoked assumptions on heat transfer rates that were not in accord with geological conditions. Taken together this required a new conceptual model that could honor a broader range of constraints, and led to the 'full chamber' mush model as described by Hildreth (2001, 2004, 2007) and subsequently Bachmann and Bergantz (2004, 2008). However there are many open questions about this model, particularly how they are assembled, the physics of melt movement and mixing, and the way they respond to open system events. For example it is now recognized that crystal mushes can be remobilized rapidly and mineral isotopic and trace element zoning requires that the mush can go through some re-melting, consistent with the unzipping model of Burgisser and Bergantz (2011).

Validating a refractometer to evaluate immunoglobulin G concentration in Jersey colostrum and the effect of multiple freeze-thaw cycles on evaluating colostrum quality.

PubMed

Morrill, K M; Robertson, K E; Spring, M M; Robinson, A L; Tyler, H D

2015-01-01

The objectives of this study were to (1) validate a method using refractometry to rapidly and accurately determine immunoglobulin (IgG) concentration in Jersey colostrum, (2) determine whether there should be different refractive index (nD) and %Brix cut points for Jersey colostrum, and (3) evaluate the effect of multiple freeze-thaw (FT) cycles on radial immunodiffusion (RID) and a digital refractometer to determine IgG concentration in Jersey colostrum. Samples (n=58; 3L) of colostrum were collected from a dairy in northwestern Iowa. Samples were analyzed within 2h of collection for IgG concentration by RID, %Brix, and nD by refractometer and an estimate of IgG by colostrometer. Samples were frozen, placed on dry ice, and transported to the laboratory at Iowa State University (Ames). Samples arrived frozen and were placed in a -20°C manual-defrost freezer until further analysis. On d 7 (1FT), d 14 (2FT), and 1yr (3FT) all samples were thawed, analyzed for IgG by RID, %Brix, nD by refractometer, and IgG estimate by colostrometer, and frozen until reanalysis at the next time point. Fresh colostrum had a mean (±SD) IgG concentration of 72.91 (±33.53) mg/mL, 21.24% (±4.43) Brix, and nD 1.3669 (±0.0074). Multiple FT cycles did affect IgG as determined by RID and colostrometer reading. The IgG concentrations were greater in fresh and 1FT samples as compared with 2FT and 3FT samples (72.91, 75.38, 67.20, and 67.31mg of IgG/mL, respectively). The colostrometer reading was lower in 1FT samples compared with fresh and 2FT samples. Multiple FT cycles had no effect on nD or %Brix reading. In fresh samples, IgG concentration was moderately correlated with nD (r=0.79), %Brix (r=0.79), and colostrometer reading (r=0.79). Diagnostic test characteristics using the recommended cut point of 1.35966 nD resulted in similar sensitivities for 1FT and 2 FT samples (94.87 and 94.74%, respectively). Cut points of 18 and 19% Brix resulted in the greatest sensitivities (92.31 and 84.62%) and specificity (94.74 and 94.74%, respectively). The 18% Brix cut point resulted in 94.83% of the samples being correctly classified based on IgG concentration. These data support the use of digital refractometer to accurately and rapidly determine IgG concentration in fresh Jersey colostrum. Additionally, these data suggest that IgG concentration determined by RID is affected by multiple FT cycles, whereas estimates obtained by refractometer are not affected by multiple FT cycles. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

"You were a star once, weren't you?": Nonlinear steps into the re-enchantment of science education

NASA Astrophysics Data System (ADS)

Laroche, Lyubov

This thesis opens rather than closes the black box, evokes rather than answers questions, and invites rather than leads. It invites the reader to imagine how science education could be, if defrosted from a disenchanting spell of the mechanistic worldview. The modern "Machine" has collapsed the entire world into static, sterile, and meaningless kingdom of plain passive matter, bringing the human race into a state far from ecological, political, social, educational, and spiritual equilibriums. According to the science of complexity, a state-far-from-equilibrium is the edge of chaos, the dynamic space of possibilities, from which a new world might be born. Departing from rigid certainties of modernity and entering the eclectic and vague bricollage of postmodern visions, we do not know yet which possibility might actualize and what kind of world might leap into existence. Will it be a technological paradise, the world of sophisticated scientific and technical rationality? Perhaps. Will it be a ruined, dead world where humanity committed ecological or military suicide? There exists a real omnipotent danger of this scenario. Or...will we eventually invent a better world that evolves not only along technological and virtual dimensions but also along our inner spiritual dimensions? Will it be a re-enchanted world where meaning, purpose, values, beauty, freedom, wisdom, divinity, compassion, awe, mystery, creativity, and the ultimate unity of everything---all qualities "stolen" by modernity---are restored? New developments in science open a space for such possibilities. State-of-the-art science provides us not only with technological miracles, but also with a conceptual framework for re-enchantment of our worldview and of education, respectively. In this manuscript I synthesize and articulate insights emerging from leading edge developments in science in a language accessible to individuals without science background. While attending to the voices of contemporary scientists, philosophers, and educators, such as Illia Prigogine, Isabelle Stengers, David Bohm, David Griffin, Gregory Bateson, Rupert Sheldrake, Alfred North Whitehead, Frijof Capra, Bill Doll, David Orr, Jack Miller, and Ken Wilber, I identify re-enchanting dimensions within new scientific visions, conceptualize holonomic inquiry for exploring these dimensions, and discuss possibilities for re-imagining school science curriculum by moving it deeper and deeper into the re-enchanted world, step by step, nonlinearly. The deeper is the re-enchantment, the more radically it will change the rationale, purpose, structure, content, skills, and metaphoric language of science education. I brought my visions of re-enchanted science curriculum to pedagogical practice, when teaching an elementary science education course. The reoccurring leitmotif throughout the entire manuscript, a soap opera "Days of Physical Science in an Elementary Schools Course," is the narrative describing and analyzing my attempts. The conclusion of my thesis is open-ended and as such, inconclusive. How could it be otherwise in the re-enchanted, creative, ever-evolving, and ever-becoming world?

Colmenar limestone as a resource for built heritage

NASA Astrophysics Data System (ADS)

Fort, Rafael; Álvarez de Buergo, Mónica; Varas-Muriel, MªJosé; Mercedes Pérez-Monserrat, Elena

2013-04-01

The Colmenar stone (or Colmenar limestone) has been used in the construction of significant builidings of the Central area of Spain, such as the Royal Palace of Aranjuez (16th -18th centuries) or the Royal Palace of Madrid (18th century). Nowadays this building stone is still widely used, both for new construction and restoration works, as well as for the indoor ornamentation of emblematic buildings such as the Royal Theater of Madrid (20th century). There are many quarries from where this stone was exploited, being the most prestigious ones those located in Colmenar de Oreja, at 50 km Southeast the city of Madrid. The high quality of the stone in these quarries, its whiteness and pureness, made this locality the most relevant in these stonés extractive activities, concentrating the most relevant exploitations and providing the stone the denomination of the municipality (Colmenar). It was an underground mining extraction until the 20th century in order to reach the highest quality level of the mine, the so called "Banco Gordo" (Thick Bank). Generically known as moorland limestone, this rock belongs to the fluvial-lacustrine carbonates of the Upper Miocene Unit of the Tertiary Madrid's Basin. Its tonality mainly ranges from white to cream and even light grey. Under a petrographic point of view, this limestone is constituted by 40% of bioclasts (characea, ostracods and gasteropods), 20-30% of micritic matrix and 30-40% of sparitic cement. Therefore, it can be classified as a biomicrite/biosparite limestone or as a bioclastic packstone. Some particularities of these limestones regarding their appearance are related to some karstic processes they underwent linked to some dissolution phenomena during the Pliocene. All of this resulted on an abundance of cavities with terra rossa fillings, a non-soluble clayey residue, iron enriched, which is the responsible for the reddish and pinkish color that the Colmenar stone sometimes shows. These petrographic characteristics define the petrophysical properties that make this rock a high quality building material. Its bulk density is 2580 ± 30 kg/m3 and its anisotropy grade is low (dM 3.1%). Its open porosity (accessible to water) is 3.8%, its water absorption is 0.8% and the ultrasound propagation velocity (Vp) is 5941 ± 111 m/s. Regarding mechanical strength, compression and flexural resistances are 78 ± 34 MPa and 9.1 ± 3.1 MPa, respectively. Microporosity is significant in this stone, with an 80% of the pores (accessible to mercury) with a diameter ranging from 0.01 to 0.1 µm. The particularities of this stone pore system, with scarce capillar porosity, makes difficult the entry of water towards its interior. Therefore the material shows a good hydric behavior, with a high durability against frost-defrost processes and thermal shock cycles, as well to salt crystallisation phenomena. Acknowledgments: Special thanks are given to the Geomaterials (S2009/MAT 1629) and CONSOLIDER-TCP (CSD2007-0058) Programmes, as well as the Complutense University of Madrid's research group on the alteration and conservation of heritage stone (921349).

Identification of protein markers for the occurrence of defrosted material in milk through a MALDI-TOF-MS profiling approach.

PubMed

Arena, Simona; Salzano, Anna Maria; Scaloni, Andrea

2016-09-16

Mozzarella di Bufala Campana is a soft, stretched curd Italian cheese made from fresh buffalo milk that obtained the Protected Designation of Origin (PDO) registration in EU legislation. Seasonality of buffalo milk production, rapid cheese decay and transport of its preserving liquid have relevant practical/economic consequences for mozzarella production; consequently, a progressive diffusion of cheese products realized with frozen curd or frozen milk has recently been observed. In order to meet the demand of the dairy producers and consumers for a reduction of starting material adulterations and for the certification of the raw milk used for cheese manufacturing, we have developed a rapid/robust MALDI-TOF-MS polypeptide profiling procedure that assays material quality through the identification of specific markers of its freshness. Massive analysis of fresh and frozen buffalo milks (stored for different times) was realized to this purpose; a tough statistical evaluation of the resulting data ultimately permitted the typing of milk samples. We identified 28 polypeptide markers of the milk freezing storage, among which 13 and 15 showed down- and over-representation, respectively. Quantitative data were confirmed by an independent analytical approach on selected markers. GLYCAM1-derived phosphopeptides (1-53), β-casein-derived phosphopeptides (1-68), β-casein-derived γ2-, γ3- and γ4-fragments, α-lactalbumin and β-lactoglobulin were components showing the highest significance. The occurrence of the first compounds in buffalo milk is here described for the first time; their formation in the frozen material was ascribed to the activity of plasmin or of unknown bacterial proteases/peptidases stable at low temperatures. In conclusion, data reported here suggest the application of this MALDI-TOF-MS polypeptide profiling platform to other high-quality dairy productions, in which milk freshness has important consequences on final product organoleptic properties. In the last decades, several studies have provided the molecular basis underlying the relation between food quality and human wellness/health. In this context, Foodomics emerged as a novel scientific discipline studying food and nutrition domains through the application of advanced omics technologies, including genomics, transcriptomics, proteomics and/or metabolomics. Above-mentioned technologies have been used in an integrated, holistic way to study foods for: i) compound profiling, authenticity, and/or biomarker-detection related to product quality or safety; ii) contaminants and their whole toxicity; iii) bioactivity and general effects on human health; iv) their digestion and assumption in human body; v) development of new transgenic products; and vi) evaluation of their modifications within the digestive tract. In the first context, a highly reproducible MALDI-TOF-MS polypeptide profiling procedure is here presented, which provides information on buffalo milk quality through the identification of specific markers of its freshness. Among identified markers, some were indicative of the action of various proteolytic enzymes and the resulting occurrence of specific defense components in buffalo milk having the physiological role to limit bacterial/virus content in this biological fluid. Data suggest the possible application of similar MALDI-TOF-based platforms to other high-quality food productions, where storage conditions of the starting materials may have important consequences on final product characteristics. Copyright © 2016 Elsevier B.V. All rights reserved.

Investigation of Energy-Efficient Supermarket Display Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, D.H.

Supermarkets represent one of the largest energy-intensive building groups in the commercial sector, consuming 2 to 3 million kWh/yr per store (ES-1). Over half of this energy use is for the refrigeration of food display cases and storage coolers. Display cases are used throughout a supermarket for the merchandising of perishable food products. The cases are maintained at air temperatures ranging from -10 to 35 F, depending upon the type of product stored. The operating characteristics and energy requirements of the refrigeration system are directly related to the refrigeration load. The sources of the display case refrigeration load consist of:more » (1) Moist and warm air infiltration through the open front of the case--air curtains are employed to inhibit this infiltration, but some ambient air is entrained, which adds a substantial portion to the refrigeration load. (2) Heat conduction through case panels and walls. (3) Thermal radiation from the ambient to the product and display case interior. (4) Internal thermal loads--the use of lights, evaporator fans, periodic defrosts, and antisweat heaters adds to the refrigeration load of the display case as well as directly consuming electric energy. The impact of each of these elements on the refrigeration load is very dependent upon case type (Figure ES-1). For example, air infiltration is the most significant portion of the refrigeration load for open, multi-deck cases, while radiation is the largest part of the load for tub-type cases. The door anti-sweat heaters represent a major share of the refrigeration load for frozen food door reach-in cases. Figure ES-2 shows the distribution of display cases in a typical supermarket (ES-2). Open, multi-deck, medium temperature display cases typically comprise about half of the refrigerated fixtures in a store (ES-3). In addition, medium temperature fixtures and storage coolers account for roughly 70 to 75 percent of the total store refrigeration load with open, multi-deck cases contributing about 3/4 of that fraction. Consequently, the focus of this investigation has tilted toward the open, vertical, multi-deck medium temperature case type. Various technologies and control methods are energy efficiency measures (EEMs) that could be applied to display cases and result in the reduction of the refrigeration load and of the energy consumption of the supermarket refrigeration system. An extensive evaluation of the EEMs was conducted in order to select those that met the following criteria: (1) Near-term implementation--All EEMs considered could be implemented with existing refrigeration hardware and technology. (2) Potential for energy-efficiency improvements--Energy savings and/or refrigeration load reduction must be obtained by the implementation of the EEM. (3) Enhancement of the ability to maintain target product temperature--Proper operation of the display case and maintenance of the stored product temperature could not be compromised by the use of the EEM. The energy impact of a number of viable display case EEMs was quantified by performing whole building hourly simulations. A special version of the U.S. Department of Energy's (DOE-2.3) program was used to develop a model of a supermarket. The model was then calibrated using available end-use monitored data to increase confidence in simulation results.« less

DFOT as tool for landslide monitoring

NASA Astrophysics Data System (ADS)

Kapeller, G.; Goltz, M.; Perzlmaier, S.; Aufleger, M.

2009-04-01

The increasing number of landslides during the last decade, especially nowadays in combination with the defrosting of permafrost due to climate change, is a growing challenge for engineers. Complex interactions of hydrological, subsoil hydraulic and soil mechanical processes are the reason for the collapse of slopes. An early detection of potential landslides and a reliable assessment of the resulting risk can be considered as a supreme task in alpine engineering. Therefore the closer understanding of hydraulic and geotechnical subsurface processes in hillslopes are eligible. Up to now, the actual condition of endangered hillslopes, e.g. pore water pressure, degree of saturation and deformation, is measured punctually by a single gauge or by a series of single gauges, respectively. The number of required gauges is directly connected with a time and cost consuming installation of the instruments, the measurements as well as analysis of the results. In addition, depending on the number of gauges there is a lack of information considering the entirety of the hillslope. Thus, a more promising approach would be the monitoring of the entirely of the hillslope in a distributed way. During the last decade the technology of Distributed Fibre Optic Temperature (DFOT) measurements was adopted for several engineering applications. By means of the heat-pulse method some of the parameters possible triggering potential landslides, i.e. the local filter velocity as well as degree of saturation can be obtained in a distributed way based on the temperature measurement along a fibre optic cable. For this derivation a calibration curve developed in a pressure tank has to be investigated. The main advantages are the cheap, robust fibre cables and the high information density along the fibre with a high spatial resolution within a range of some kilometres. Because of its features DFOT is serviceable for long time monitoring. Thus, this approach has to be considered as a clear quality step ahead, particular in alpine hillslopes. In the first part of the paper the basics of DFOT as an instrument for long-time-monitoring will be described in more detail. The second part will deal with the project "Distributed Saturation and Flow Velocity Measurement in Alpine Hillslopes" funded by the Austrian Academy of Sciences and regards the behaviour of shallow landslides. The primary goal of the project is the introduction and verification of suitability of distributed saturation and velocity measurement for monitoring subsurface flow in hillslopes as well as the optimisation of the specific application in hillslopes. For this purpose the fibre will be installed lamellar in different levels within the natural slope. The installation procedure as well as the refilling of the ditches will be investigated. To take care of water deflection in ditches different types of refill material have to be considered, e.g. trench refilling, artificial surroundings, etc. Short heavy rainfall as well as long time rainfall will be simulated by using a sprinkler irrigation system. The approach of graduated rain intensities along the slopes width will show different, comparable results within a single irrigation. To ensure fibre optic temperature deliverables also some conventional instruments, e.g. TDR-probes, temperature sensor, rain gauge, etc. get installed. Based on the high information density and the knowledge of the main triggering parameters the processes within hillslopes, e.g subsoil hydraulic failure mechanism due to water-flow in soil, will be more understandable. Moreover, the actual condition of hillslopes will be pre-estimated by long-time-monitoring.

Geologic Map of the MTM-85000 Quadrangle, Planum Australe Region of Mars

USGS Publications Warehouse

Herkenhoff, Ken E.

2001-01-01

Introduction The polar deposits on Mars probably record martian climate history over the last 107 to 109 years (for example, Thomas and others, 1992). The area shown on this map includes layered polar deposits and residual polar ice, as well as some exposures of older terrain. Howard and others (1982) noted that an area (at lat 84.8 S., long 356 W.) near a 23-km diameter impact crater (Plaut and others, 1988) appears to have undergone recent deposition, as evidenced by the partial burial of secondary craters. Herkenhoff and Murray (1990a) mapped this area as a mixture of frost and defrosted ground and suggested that the presence of frost throughout the year stabilizes dust deposited in this area. This quadrangle was mapped using high-resolution Mariner 9 (table 1) and Viking Orbiter images in order to study the relations among erosional, cratering, and depositional processes on the polar layered deposits and to search for further evidence of recent deposition. Published geologic maps of the south polar region of Mars are based on images acquired by Mariner 9 (Condit and Soderblom, 1978; Scott and Carr, 1978) and the Viking Orbiters (Tanaka and Scott, 1987). The extent of the layered deposits mapped previously from Mariner 9 data is different from that mapped using Viking Orbiter images, and the present map agrees with the map by Tanaka and Scott (1987): the layered deposits extend to the northern boundary of the map area. However, the oldest unit in this area is mapped as undivided material (unit HNu) rather than the hilly unit in the plateau sequence (unit Nplh; Tanaka and Scott, 1987). The residual polar ice cap, areas of partial frost cover, the layered deposits, and two nonvolatile surface units-the dust mantle and the dark material-were mapped by Herkenhoff and Murray (1990a) at 1:2,000,000 scale using a color mosaic of Viking Orbiter images. This mosaic was used to confirm the identification of the non-volatile Amazonian units for this map and to test hypotheses for their origin and evolution. The colors and albedos of these units, as measured in places both within and outside of this map area, are presented in table 2 and figure 1. The red/violet ratio image was particularly useful in distinguishing the various low-albedo materials, as brightness variations due to topography are essentially removed in such ratio images and color variations are easily seen. Because the resolution of the color mosaics is not sufficient to map these units in detail at 1:500,000 scale, contacts between them were recognized and mapped using higher resolution black and white Viking and Mariner 9 images. The largest impact crater in the layered deposits, 23 km in diameter at lat 84.5 S., long 359 W., now named 'McMurdo,' was recognized by Plaut and others (1988). The northern rim of this crater is missing, perhaps due to erosion of the layered deposits in which it was formed (fig. 2). Secondary craters from this impact are not observed north of the crater but are abundant to the south. Although the crater statistics are poor (only 16 likely impact craters found in Viking Orbiter images of the south polar layered deposits), these observations generally support the conclusions that the south polar layered deposits are Late Amazonian in age and that some areas have been exposed for about 120 million years (Plaut and others, 1988; Herkenhoff and Murray, 1992, 1994; Herkenhoff, 1998). However, the recent cratering flux on Mars is poorly constrained, so inferred ages of surface units are uncertain. The Viking Orbiter 2 images used to construct the base were taken during the southern summer of 1977, with resolutions no better than 130 m/pixel. A digital mosaic of Mariner 9 images also was constructed to aid in mapping. The Mariner 9 images were taken during the southern summer of 1971 and 1972 and have resolutions as high as 85 m/pixel (table 1). However, the usefulness of the Mariner 9 mosaic image is limited by incomplete coverag