48 CFR 25.302-3 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... functions as a primary deliverable or the provision of private security functions is ancillary to the stated... entered into on a non-DoD contract for the performance of private security functions by individual... the Secretary of State. (b) Non-DoD agencies: This section applies to acquisitions by non-DoD agencies...

48 CFR 25.302-3 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... functions as a primary deliverable or the provision of private security functions is ancillary to the stated... entered into on a non-DoD contract for the performance of private security functions by individual... the Secretary of State. (b) Non-DoD agencies: This section applies to acquisitions by non-DoD agencies...

The National Shipbuilding Research Program. Application of Industrial Engineering Techniques to Reduce Worker’s Compensation and Environmental Costs - Deliverable A

DTIC Science & Technology

1999-10-01

N8-96-3 Application of Industrial Engineering Techniques to Reduce Workers ’ Compensation and Environmental Costs - Deliverable A U.S. DEPARTMENT OF...disclosed in the report. As used in the above, “Persons acting on behalf of the United States Navy” includes any employee , contractor, or subcontractor to...the contractor of the United States Navy to the extent that such employee , contractor, or subcontractor to the contractor prepares, handles, or

Advantages and limitations of navigation-based multicriteria optimization (MCO) for localized prostate cancer IMRT planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGarry, Conor K., E-mail: conor.mcgarry@belfasttrust.hscni.net; Bokrantz, Rasmus; RaySearch Laboratories, Stockholm

2014-10-01

Efficacy of inverse planning is becoming increasingly important for advanced radiotherapy techniques. This study’s aims were to validate multicriteria optimization (MCO) in RayStation (v2.4, RaySearch Laboratories, Sweden) against standard intensity-modulated radiation therapy (IMRT) optimization in Oncentra (v4.1, Nucletron BV, the Netherlands) and characterize dose differences due to conversion of navigated MCO plans into deliverable multileaf collimator apertures. Step-and-shoot IMRT plans were created for 10 patients with localized prostate cancer using both standard optimization and MCO. Acceptable standard IMRT plans with minimal average rectal dose were chosen for comparison with deliverable MCO plans. The trade-off was, for the MCO plans, managedmore » through a user interface that permits continuous navigation between fluence-based plans. Navigated MCO plans were made deliverable at incremental steps along a trajectory between maximal target homogeneity and maximal rectal sparing. Dosimetric differences between navigated and deliverable MCO plans were also quantified. MCO plans, chosen as acceptable under navigated and deliverable conditions resulted in similar rectal sparing compared with standard optimization (33.7 ± 1.8 Gy vs 35.5 ± 4.2 Gy, p = 0.117). The dose differences between navigated and deliverable MCO plans increased as higher priority was placed on rectal avoidance. If the best possible deliverable MCO was chosen, a significant reduction in rectal dose was observed in comparison with standard optimization (30.6 ± 1.4 Gy vs 35.5 ± 4.2 Gy, p = 0.047). Improvements were, however, to some extent, at the expense of less conformal dose distributions, which resulted in significantly higher doses to the bladder for 2 of the 3 tolerance levels. In conclusion, similar IMRT plans can be created for patients with prostate cancer using MCO compared with standard optimization. Limitations exist within MCO regarding conversion of navigated plans to deliverable apertures, particularly for plans that emphasize avoidance of critical structures. Minimizing these differences would result in better quality treatments for patients with prostate cancer who were treated with radiotherapy using MCO plans.« less

SNAP-8 electrical generating system development program

NASA Technical Reports Server (NTRS)

1971-01-01

The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology was demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.

Synthetic Report of Research and Development of Professional Knowledge Practices

ERIC Educational Resources Information Center

Toiviainen, Hanna; Hoynalanmaa, Mikko; Lallimo, Jiri; Moen, Anne; Smordal, Ole; Morch, Anders; Toikka, Seppo

2006-01-01

This deliverable has been produced in the context of the Knowledge-Practice Laboratory (KP-Lab) project, which is aimed at facilitating innovative practices of working with knowledge in higher education, teacher training, and professional networks. This deliverable is a synopsis of the first experiences encountered during the first 6 months of the…

Texture analysis on the fluence map to evaluate the degree of modulation for volumetric modulated arc therapy.

PubMed

Park, So-Yeon; Kim, Il Han; Ye, Sung-Joon; Carlson, Joel; Park, Jong Min

2014-11-01

Texture analysis on fluence maps was performed to evaluate the degree of modulation for volumetric modulated arc therapy (VMAT) plans. A total of six textural features including angular second moment, inverse difference moment, contrast, variance, correlation, and entropy were calculated for fluence maps generated from 20 prostate and 20 head and neck VMAT plans. For each of the textural features, particular displacement distances (d) of 1, 5, and 10 were adopted. To investigate the deliverability of each VMAT plan, gamma passing rates of pretreatment quality assurance, and differences in modulating parameters such as multileaf collimator (MLC) positions, gantry angles, and monitor units at each control point between VMAT plans and dynamic log files registered by the Linac control system during delivery were acquired. Furthermore, differences between the original VMAT plan and the plan reconstructed from the dynamic log files were also investigated. To test the performance of the textural features as indicators for the modulation degree of VMAT plans, Spearman's rank correlation coefficients (rs) with the plan deliverability were calculated. For comparison purposes, conventional modulation indices for VMAT including the modulation complexity score for VMAT, leaf travel modulation complexity score, and modulation index supporting station parameter optimized radiation therapy (MISPORT) were calculated, and their correlations were analyzed in the same way. There was no particular textural feature which always showed superior correlations with every type of plan deliverability. Considering the results comprehensively, contrast (d = 1) and variance (d = 1) generally showed considerable correlations with every type of plan deliverability. These textural features always showed higher correlations to the plan deliverability than did the conventional modulation indices, except in the case of modulating parameter differences. The rs values of contrast to the global gamma passing rates with criteria of 2%/2 mm, 2%/1 mm, and 1%/2 mm were 0.536, 0.473, and 0.718, respectively. The respective values for variance were 0.551, 0.481, and 0.688. In the case of local gamma passing rates, the rs values of contrast were 0.547, 0.578, and 0.620, respectively, and those of variance were 0.519, 0.527, and 0.569. All of the rs values in those cases were statistically significant (p < 0.003). In the cases of global and local gamma passing rates, MISPORT showed the highest correlations among the conventional modulation indices. For global passing rates, rs values of MISPORT were -0.420, -0.330, and -0.632, respectively, and those for local passing rates were -0.455, -0.490 and -0.502. The values of rs of contrast, variance, and MISPORT with the MLC errors were -0.863, -0.828, and 0.795, respectively, all with statistical significances (p < 0.001). The correlations with statistical significances between variance and dose-volumetric differences were observed more frequently than the others. The contrast (d = 1) and variance (d = 1) calculated from fluence maps of VMAT plans showed considerable correlations with the plan deliverability, indicating their potential use as indicators for assessing the degree of modulation of VMAT plans. Both contrast and variance consistently showed better performance than the conventional modulation indices for VMAT.

SNAP-8 electrical generating system development program

NASA Technical Reports Server (NTRS)

1971-01-01

The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology has been demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.

Engineering and management experience at Texas A&M Transportation Institute

NASA Astrophysics Data System (ADS)

Chowdhury, Arif Tahjibul

This manuscript presents the author's engineering and management experience during his internship in the Materials and Pavements (M&P) Division at the Texas A&M Transportation Institute (TTI), and is a record of study for the Doctor of Engineering at Texas A&M University. Through this internship, he met his established internship objectives of gaining technical knowledge as well as knowledge and skills in project management, organizational communication, and quality management of pavement condition data, and of attaining professional development. In meeting these objectives, the author describes the history, mission, and organizational structure of his workplace. He also presents his experience of developing and delivering a two-week training course on pavement design and construction in Kosovo. Participating in a number of professional development training courses and other activities prepared him for working as an engineering manager. These activities include Delta-T leadership training, an instructor development course, a time management and organizational skills course, and the M&P Division lecture series. Leadership and skills learned through the Delta-T program were beneficial for the employee as well as the employer. For the class project, the author and his teammates performed a study dealing with improving TTI's deliverables. The Delta-T team composed a report summarizing their efforts of examining the current state of TTI's project deliverables, the deliverables' shortcomings, and potential enhancements to expand the deliverables' appeal to additional types of potential users outside the traditional research community. The team also developed a prototype web-based model of deliverables and presented some implementation recommendations. Participating in the Texas Department of Transportation's (TxDOT's) pavement surface distress data collection program enabled the author to become familiar with pavement distress data quality management and thus attain the technical and nontechnical skills required for project management. He noticed some areas for improvement in TxDOT's rater's manual, rater's training class, and acceptance criteria for visual distress data.

Innovative Techniques for the Production of Low Cost 2D Laser Diode Arrays. Supplies or Services and Prices/Costs

DTIC Science & Technology

1991-12-31

continue on facet coatings, PL correlation to device performance, and CVD diamond. All global issues mentioned in Section 2.0 will be addresses and...The CVD diamond submounts will be hermetically sealed, electrically isolated and liquid cooled. (Deliverables: 5 5-bar arrays.) The following global ... issues not mentioned above will be investigated continuously throughout all four phases of this program: (1) design and development of a mask set to

SU-F-P-64: The Impact of Plan Complexity Parameters On the Plan Quality and Deliverability of Volumetric Modulated Arc Therapy with Canonical Correlation Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, X; Yi, J; Xie, C

Purpose: To evaluate the impact of complexity indices on the plan quality and deliverability of volumetric modulated arc therapy (VMAT), and to determine the most significant parameters in the generation of an ideal VMAT plan. Methods: A multi-dimensional exploratory statistical method, canonical correlation analysis (CCA) was adopted to study the correlations between VMAT parameters of complexity, quality and deliverability, as well as their contribution weights with 32 two-arc VMAT nasopharyngeal cancer (NPC) patients and 31 one-arc VMAT prostate cancer patients. Results: The MU per arc (MU/Arc) and MU per control point (MU/CP) of NPC were 337.8±25.2 and 3.7±0.3, respectively, whichmore » were significantly lower than those of prostate cancer patients (MU/Arc : 506.9±95.4, MU/CP : 5.6±1.1). The plan complexity indices indicated that two-arc VMAT plans were more complex than one-arc VMAT plans. Plan quality comparison confirmed that one-arc VMAT plans had a high quality than two-arc VMAT plans. CCA results implied that plan complexity parameters were highly correlated with plan quality with the first two canonical correlations of 0.96, 0.88 (both p<0.001) and significantly correlated with deliverability with the first canonical correlation of 0.79 (p<0.001), plan quality and deliverability was also correlated with the first canonical correlation of 0.71 (p=0.02). Complexity parameters of MU/CP, segment area (SA) per CP, percent of MU/CP less 3 and planning target volume (PTV) were weighted heavily in correlation with plan quality and deliveability . Similar results obtained from individual NPC and prostate CCA analysis. Conclusion: Relationship between complexity, quality, and deliverability parameters were investigated with CCA. MU, SA related parameters and PTV volume were found to have strong effect on the plan quality and deliverability. The presented correlation among different quantified parameters could be used to improve the plan quality and the efficiency of the radiotherapy process when creating a complex VMAT plan.« less

Performance Testing of the Vapor Phase Catalytic Ammonia Removal Engineering Development Unit

NASA Technical Reports Server (NTRS)

Flynn, Michael; Tleimat, Maher; Nalette, Tim; Quinn, Gregory

2005-01-01

This paper describes the results of performance testing of the Vapor Phase Catalytic Ammonia Removal (VPCAR) technology. The VPCAR technology is currently being developed by NASA as a Mars transit vehicle water recycling system. NASA has recently completed-a grant-to develop a next generation VPCAR system. This grant concluded with the shipment of the final deliverable to NASA on 8/31/03. This paper presents the results of mass, power, volume, and acoustic measurements for the delivered system. Product water purity analysis for a Mars transit mission and a simulated planetary base wastewater ersatz are also provided.

Radiation Hardened Telerobotic Dismantling System Development Final Report CRADA No. TC-1340-96

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, C.; Lightman, A.

This project was a collaborative effort between the University of California, LLNL and RedZone Robotics, Inc. for the development of radiation-hardened telerobotic dismantling systems for use in applications such as nuclear facility remediation, nuclear accident response, and Chemobyltype remediation. The project supported the design, development, fabrication and testing of a Ukrainian robotic systems. The project was completed on time and within budget. All deliverables were completed. The final project deliverables were consistent with the plans developed in the original project with the exception that the fabricated systems remained in Ukraine.

SU-F-BRB-12: A Novel Haar Wavelet Based Approach to Deliver Non-Coplanar Intensity Modulated Radiotherapy Using Sparse Orthogonal Collimators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, D; Ruan, D; Low, D

2015-06-15

Purpose: Existing efforts to replace complex multileaf collimator (MLC) by simple jaws for intensity modulated radiation therapy (IMRT) resulted in unacceptable compromise in plan quality and delivery efficiency. We introduce a novel fluence map segmentation method based on compressed sensing for plan delivery using a simplified sparse orthogonal collimator (SOC) on the 4π non-coplanar radiotherapy platform. Methods: 4π plans with varying prescription doses were first created by automatically selecting and optimizing 20 non-coplanar beams for 2 GBM, 2 head & neck, and 2 lung patients. To create deliverable 4π plans using SOC, which are two pairs of orthogonal collimators withmore » 1 to 4 leaves in each collimator bank, a Haar Fluence Optimization (HFO) method was used to regulate the number of Haar wavelet coefficients while maximizing the dose fidelity to the ideal prescription. The plans were directly stratified utilizing the optimized Haar wavelet rectangular basis. A matching number of deliverable segments were stratified for the MLC-based plans. Results: Compared to the MLC-based 4π plans, the SOC-based 4π plans increased the average PTV dose homogeneity from 0.811 to 0.913. PTV D98 and D99 were improved by 3.53% and 5.60% of the corresponding prescription doses. The average mean and maximal OAR doses slightly increased by 0.57% and 2.57% of the prescription doses. The average number of segments ranged between 5 and 30 per beam. The collimator travel time to create the segments decreased with increasing leaf numbers in the SOC. The two and four leaf designs were 1.71 and 1.93 times more efficient, on average, than the single leaf design. Conclusion: The innovative dose domain optimization based on compressed sensing enables uncompromised 4π non-coplanar IMRT dose delivery using simple rectangular segments that are deliverable using a sparse orthogonal collimator, which only requires 8 to 16 leaves yet is unlimited in modulation resolution. This work is supported in part by Varian Medical Systems, Inc. and NIH R43 CA18339.« less

Load Composition Model Workflow (BPA TIP-371 Deliverable 1A)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chassin, David P.; Cezar, Gustavo V.

This project is funded under Bonneville Power Administration (BPA) Strategic Partnership Project (SPP) 17-005 between BPA and SLAC National Accelerator Laboratory. The project in a BPA Technology Improvement Project (TIP) that builds on and validates the Composite Load Model developed by the Western Electric Coordinating Council's (WECC) Load Modeling Task Force (LMTF). The composite load model is used by the WECC Modeling and Validation Work Group to study the stability and security of the western electricity interconnection. The work includes development of load composition data sets, collection of load disturbance data, and model development and validation. This work supports reliablemore » and economic operation of the power system. This report was produced for Deliverable 1A of the BPA TIP-371 Project entitled \\TIP 371: Advancing the Load Composition Model". The deliverable documents the proposed work ow for the Composite Load Model, which provides the basis for the instrumentation, data acquisition, analysis and data dissemination activities addressed by later phases of the project.« less

Texture analysis on the fluence map to evaluate the degree of modulation for volumetric modulated arc therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, So-Yeon; Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744; Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744

Purpose: Texture analysis on fluence maps was performed to evaluate the degree of modulation for volumetric modulated arc therapy (VMAT) plans. Methods: A total of six textural features including angular second moment, inverse difference moment, contrast, variance, correlation, and entropy were calculated for fluence maps generated from 20 prostate and 20 head and neck VMAT plans. For each of the textural features, particular displacement distances (d) of 1, 5, and 10 were adopted. To investigate the deliverability of each VMAT plan, gamma passing rates of pretreatment quality assurance, and differences in modulating parameters such as multileaf collimator (MLC) positions, gantrymore » angles, and monitor units at each control point between VMAT plans and dynamic log files registered by the Linac control system during delivery were acquired. Furthermore, differences between the original VMAT plan and the plan reconstructed from the dynamic log files were also investigated. To test the performance of the textural features as indicators for the modulation degree of VMAT plans, Spearman’s rank correlation coefficients (r{sub s}) with the plan deliverability were calculated. For comparison purposes, conventional modulation indices for VMAT including the modulation complexity score for VMAT, leaf travel modulation complexity score, and modulation index supporting station parameter optimized radiation therapy (MI{sub SPORT}) were calculated, and their correlations were analyzed in the same way. Results: There was no particular textural feature which always showed superior correlations with every type of plan deliverability. Considering the results comprehensively, contrast (d = 1) and variance (d = 1) generally showed considerable correlations with every type of plan deliverability. These textural features always showed higher correlations to the plan deliverability than did the conventional modulation indices, except in the case of modulating parameter differences. The r{sub s} values of contrast to the global gamma passing rates with criteria of 2%/2 mm, 2%/1 mm, and 1%/2 mm were 0.536, 0.473, and 0.718, respectively. The respective values for variance were 0.551, 0.481, and 0.688. In the case of local gamma passing rates, the r{sub s} values of contrast were 0.547, 0.578, and 0.620, respectively, and those of variance were 0.519, 0.527, and 0.569. All of the r{sub s} values in those cases were statistically significant (p < 0.003). In the cases of global and local gamma passing rates, MI{sub SPORT} showed the highest correlations among the conventional modulation indices. For global passing rates, r{sub s} values of MI{sub SPORT} were −0.420, −0.330, and −0.632, respectively, and those for local passing rates were −0.455, −0.490 and −0.502. The values of r{sub s} of contrast, variance, and MI{sub SPORT} with the MLC errors were −0.863, −0.828, and 0.795, respectively, all with statistical significances (p < 0.001). The correlations with statistical significances between variance and dose-volumetric differences were observed more frequently than the others. Conclusions: The contrast (d = 1) and variance (d = 1) calculated from fluence maps of VMAT plans showed considerable correlations with the plan deliverability, indicating their potential use as indicators for assessing the degree of modulation of VMAT plans. Both contrast and variance consistently showed better performance than the conventional modulation indices for VMAT.« less

A Systems Analysis and Design Case Study for a Business Modeling Learning Experience for a Capstone CIS/IS Systems Development Class

ERIC Educational Resources Information Center

Russell, Jack; Russell, Barbara

2015-01-01

The goal is to provide a robust and challenging problem statement for a capstone, advanced systems analysis and design course for CIS/MIS/CS majors. In addition to the problem narrative, a representative solution for much of the business modeling deliverables is presented using the UML paradigm. A structured analysis deliverable will be the topic…

Ultrafast treatment plan optimization for volumetric modulated arc therapy (VMAT)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Men Chunhua; Romeijn, H. Edwin; Jia Xun

2010-11-15

Purpose: To develop a novel aperture-based algorithm for volumetric modulated arc therapy (VMAT) treatment plan optimization with high quality and high efficiency. Methods: The VMAT optimization problem is formulated as a large-scale convex programming problem solved by a column generation approach. The authors consider a cost function consisting two terms, the first enforcing a desired dose distribution and the second guaranteeing a smooth dose rate variation between successive gantry angles. A gantry rotation is discretized into 180 beam angles and for each beam angle, only one MLC aperture is allowed. The apertures are generated one by one in a sequentialmore » way. At each iteration of the column generation method, a deliverable MLC aperture is generated for one of the unoccupied beam angles by solving a subproblem with the consideration of MLC mechanic constraints. A subsequent master problem is then solved to determine the dose rate at all currently generated apertures by minimizing the cost function. When all 180 beam angles are occupied, the optimization completes, yielding a set of deliverable apertures and associated dose rates that produce a high quality plan. Results: The algorithm was preliminarily tested on five prostate and five head-and-neck clinical cases, each with one full gantry rotation without any couch/collimator rotations. High quality VMAT plans have been generated for all ten cases with extremely high efficiency. It takes only 5-8 min on CPU (MATLAB code on an Intel Xeon 2.27 GHz CPU) and 18-31 s on GPU (CUDA code on an NVIDIA Tesla C1060 GPU card) to generate such plans. Conclusions: The authors have developed an aperture-based VMAT optimization algorithm which can generate clinically deliverable high quality treatment plans at very high efficiency.« less

Ultrafast treatment plan optimization for volumetric modulated arc therapy (VMAT).

PubMed

Men, Chunhua; Romeijn, H Edwin; Jia, Xun; Jiang, Steve B

2010-11-01

To develop a novel aperture-based algorithm for volumetric modulated are therapy (VMAT) treatment plan optimization with high quality and high efficiency. The VMAT optimization problem is formulated as a large-scale convex programming problem solved by a column generation approach. The authors consider a cost function consisting two terms, the first enforcing a desired dose distribution and the second guaranteeing a smooth dose rate variation between successive gantry angles. A gantry rotation is discretized into 180 beam angles and for each beam angle, only one MLC aperture is allowed. The apertures are generated one by one in a sequential way. At each iteration of the column generation method, a deliverable MLC aperture is generated for one of the unoccupied beam angles by solving a subproblem with the consideration of MLC mechanic constraints. A subsequent master problem is then solved to determine the dose rate at all currently generated apertures by minimizing the cost function. When all 180 beam angles are occupied, the optimization completes, yielding a set of deliverable apertures and associated dose rates that produce a high quality plan. The algorithm was preliminarily tested on five prostate and five head-and-neck clinical cases, each with one full gantry rotation without any couch/collimator rotations. High quality VMAT plans have been generated for all ten cases with extremely high efficiency. It takes only 5-8 min on CPU (MATLAB code on an Intel Xeon 2.27 GHz CPU) and 18-31 s on GPU (CUDA code on an NVIDIA Tesla C1060 GPU card) to generate such plans. The authors have developed an aperture-based VMAT optimization algorithm which can generate clinically deliverable high quality treatment plans at very high efficiency.

Contribution of 3D printing to mandibular reconstruction after cancer.

PubMed

Dupret-Bories, A; Vergez, S; Meresse, T; Brouillet, F; Bertrand, G

2018-04-01

Three-dimensional (3D) printing is booming in the medical field. This technology increases the possibilities of personalized treatment for patients, while lowering manufacturing costs. To facilitate mandibular reconstruction with fibula free flap, some companies propose cutting guides obtained by CT-guided moulding. However, these guides are prohibitively expensive (€2,000 to €6,000). Based on a partnership with the CNRS, engineering students and a biomedical company, the authors have developed cutting guides and 3D-printed mandible templates, deliverable in 7days and at a lower cost. The novelty of this project is the speed of product development at a significantly lower price. In this technical note, the authors describe the logistic chain of production of mandible templates and cutting guides, as well as the results obtained. The goal is to allow access to this technology to all patients in the near future. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Application of fuzzy logic-neural network based reinforcement learning to proximity and docking operations: Special approach/docking testcase results

NASA Technical Reports Server (NTRS)

Jani, Yashvant

1993-01-01

As part of the RICIS project, the reinforcement learning techniques developed at Ames Research Center are being applied to proximity and docking operations using the Shuttle and Solar Maximum Mission (SMM) satellite simulation. In utilizing these fuzzy learning techniques, we use the Approximate Reasoning based Intelligent Control (ARIC) architecture, and so we use these two terms interchangeably to imply the same. This activity is carried out in the Software Technology Laboratory utilizing the Orbital Operations Simulator (OOS) and programming/testing support from other contractor personnel. This report is the final deliverable D4 in our milestones and project activity. It provides the test results for the special testcase of approach/docking scenario for the shuttle and SMM satellite. Based on our experience and analysis with the attitude and translational controllers, we have modified the basic configuration of the reinforcement learning algorithm in ARIC. The shuttle translational controller and its implementation in ARIC is described in our deliverable D3. In order to simulate the final approach and docking operations, we have set-up this special testcase as described in section 2. The ARIC performance results for these operations are discussed in section 3 and conclusions are provided in section 4 along with the summary for the project.

Cost and Schedule Analytical Techniques Development

NASA Technical Reports Server (NTRS)

1998-01-01

This Final Report summarizes the activities performed by Science Applications International Corporation (SAIC) under contract NAS 8-40431 "Cost and Schedule Analytical Techniques Development Contract" (CSATD) during Option Year 3 (December 1, 1997 through November 30, 1998). This Final Report is in compliance with Paragraph 5 of Section F of the contract. This CSATD contract provides technical products and deliverables in the form of parametric models, databases, methodologies, studies, and analyses to the NASA Marshall Space Flight Center's (MSFC) Engineering Cost Office (PP03) and the Program Plans and Requirements Office (PP02) and other user organizations. Detailed Monthly Reports were submitted to MSFC in accordance with the contract's Statement of Work, Section IV "Reporting and Documentation". These reports spelled out each month's specific work performed, deliverables submitted, major meetings conducted, and other pertinent information. Therefore, this Final Report will summarize these activities at a higher level. During this contract Option Year, SAIC expended 25,745 hours in the performance of tasks called out in the Statement of Work. This represents approximately 14 full-time EPs. Included are the Huntsville-based team, plus SAIC specialists in San Diego, Ames Research Center, Tampa, and Colorado Springs performing specific tasks for which they are uniquely qualified.

Pilot Aircraft Interface Objectives/Rationale

NASA Technical Reports Server (NTRS)

Shively, Jay

2010-01-01

Objective: Database and proof of concept for guidelines for GCS compliance a) Rationale: 1) Provide research test-bed to develop guidelines. 2) Modify GCS for NAS Compliance to provide proof of concept. b) Approach: 1) Assess current state of GCS technology. 2) Information Requirements Definition. 3) SME Workshop. 4) Modify an Existing GCS for NAS Compliance. 5) Define exemplar UAS (choose system to develop prototype). 6) Define Candidate Displays & Controls. 7) Evaluate/ refine in Simulations. 8) Demonstrate in flight. c) Deliverables: 1) Information Requirements Report. 2) Workshop Proceedings. 3) Technical Reports/ papers on Simulations & Flight Demo. 4) Database for guidelines.

Mechanics Methodology for Textile Preform Composite Materials

NASA Technical Reports Server (NTRS)

Poe, Clarence C., Jr.

1996-01-01

NASA and its contractors have completed a program to develop a basic mechanics underpinning for textile composites. Three major deliverables were produced by the program: 1. A set of test methods for measuring material properties and design allowables; 2. Mechanics models to predict the effects of the fiber preform architecture and constituent properties on engineering moduli, strength, damage resistance, and fatigue life; and 3. An electronic data base of coupon type test data. This report describes these three deliverables.

Final Report Extreme Computing and U.S. Competitiveness DOE Award. DE-FG02-11ER26087/DE-SC0008764

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mustain, Christopher J.

The Council has acted on each of the grant deliverables during the funding period. The deliverables are: (1) convening the Council’s High Performance Computing Advisory Committee (HPCAC) on a bi-annual basis; (2) broadening public awareness of high performance computing (HPC) and exascale developments; (3) assessing the industrial applications of extreme computing; and (4) establishing a policy and business case for an exascale economy.

Computational assessment of deep-seated tumor treatment capability of the 9Be(d,n)10B reaction for accelerator-based boron neutron capture therapy (AB-BNCT).

PubMed

Capoulat, M E; Minsky, D M; Kreiner, A J

2014-03-01

The 9Be(d,n)10B reaction was studied as an epithermal neutron source for brain tumor treatment through Boron Neutron Capture Therapy (BNCT). In BNCT, neutrons are classified according to their energies as thermal (<0.5 eV), epithermal (from 0.5 eV to 10 keV) or fast (>10 keV). For deep-seated tumors epithermal neutrons are needed. Since a fraction of the neutrons produced by this reaction are quite fast (up to 5-6 MeV, even for low-bombarding energies), an efficient beam shaping design is required. This task was carried out (1) by selecting the combinations of bombarding energy and target thickness that minimize the highest-energy neutron production; and (2) by the appropriate choice of the Beam Shaping Assembly (BSA) geometry, for each of the combinations found in (1). The BSA geometry was determined as the configuration that maximized the dose deliverable to the tumor in a 1 h treatment, within the constraints imposed by the healthy tissue dose adopted tolerance. Doses were calculated through the MCNP code. The highest dose deliverable to the tumor was found for an 8 μm target and a deuteron beam of 1.45 MeV. Tumor weighted doses ≥40 Gy can be delivered up to about 5 cm in depth, with a maximum value of 51 Gy at a depth of about 2 cm. This dose performance can be improved by relaxing the treatment time constraint and splitting the treatment into two 1-h sessions. These good treatment capabilities strengthen the prospects for a potential use of this reaction in BNCT. Copyright © 2013 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The multi-agent system (MAS) approach has been applied with promising results for enhancing an electric power distribution circuit, such as the Circuit of the Future as developed by Southern California Edison. These next generation power system results include better ability to reconfigure the circuit as well as the increased capability to improve the protection and enhance the reliability of the circuit. There were four main tasks in this project. The specific results for each of these four tasks and their related topics are presented in main sections of this report. Also, there were seven deliverables for this project. The mainmore » conclusions for these deliverables are summarized in the identified subtask section of this report. The specific details for each of these deliverables are included in the “Project Deliverables” section at the end of this Final Report.« less

Gram-scale, high-yield synthesis of a robust metal-organic framework for storing methane and other gases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilmer, CE; Farha, OK; Yildirim, T

We have synthesized and characterized a new metal-organic framework (MOF) material, NU-125, that, in the single-crystal limit, achieves a methane storage density at 58 bar (840 psi) and 298 K corresponding to 86% of that obtained with compressed natural gas tanks (CNG) used in vehicles today, when the latter are pressurized to 248 bar (3600 psi). More importantly, the deliverable capacity (58 bar to 5.8 bar) for NU-125 is 67% of the deliverable capacity of a CNG tank that starts at 248 bar. (For crystalline granules or powders, particle packing inefficiencies will yield densities and deliverable capacities lower than 86%more » and 67% of high-pressure CNG.) This material was synthesized in high yield on a gram-scale in a single-batch synthesis. Methane adsorption isotherms were measured over a wide pressure range (0.1-58 bar) and repeated over twelve cycles on the same sample, which showed no detectable degradation. Adsorption of CO2 and H-2 over a broad range of pressures and temperatures are also reported and agree with our computational findings.« less

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

Hagerty, J. J.

1981-01-01

Progress in the development of automated solar cell and module production is reported. The unimate robot is programmed for the final 35 cell pattern to be used in the fabrication of the deliverable modules. The mechanical construction of the automated lamination station and final assembly station phases are completed and the first operational testing is underway. The final controlling program is written and optimized. The glass reinforced concrete (GRC) panels to be used for testing and deliverables are in production. Test routines are grouped together and defined to produce the final control program.

20 CFR 638.300 - Eligibility for funds and eligible deliverers.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., and Facilities Management § 638.300 Eligibility for funds and eligible deliverers. (a) Funds shall be... provision of Job Corps operational support services. (b) Eligible deliverers for the operation of centers and for the operational support services necessary to center operation shall be units of Federal...

Proposed Requirements-driven User-scenario Development Protocol for the Belmont Forum E-Infrastructure and Data Management Cooperative Research Agreement

NASA Astrophysics Data System (ADS)

Wee, B.; Car, N.; Percivall, G.; Allen, D.; Fitch, P. G.; Baumann, P.; Waldmann, H. C.

2014-12-01

The Belmont Forum E-Infrastructure and Data Management Cooperative Research Agreement (CRA) is designed to foster a global community to collaborate on e-infrastructure challenges. One of the deliverables is an implementation plan to address global data infrastructure interoperability challenges and align existing domestic and international capabilities. Work package three (WP3) of the CRA focuses on the harmonization of global data infrastructure for sharing environmental data. One of the subtasks under WP3 is the development of user scenarios that guide the development of applicable deliverables. This paper describes the proposed protocol for user scenario development. It enables the solicitation of user scenarios from a broad constituency, and exposes the mechanisms by which those solicitations are evaluated against requirements that map to the Belmont Challenge. The underlying principle of traceability forms the basis for a structured, requirements-driven approach resulting in work products amenable to trade-off analyses and objective prioritization. The protocol adopts the ISO Reference Model for Open Distributed Processing (RM-ODP) as a top level framework. User scenarios are developed within RM-ODP's "Enterprise Viewpoint". To harmonize with existing frameworks, the protocol utilizes the conceptual constructs of "scenarios", "use cases", "use case categories", and use case templates as adopted by recent GEOSS Architecture Implementation Project (AIP) deliverables and CSIRO's eReefs project. These constructs are encapsulated under the larger construct of "user scenarios". Once user scenarios are ranked by goodness-of-fit to the Belmont Challenge, secondary scoring metrics may be generated, like goodness-of-fit to FutureEarth science themes. The protocol also facilitates an assessment of the ease of implementing given user scenario using existing GEOSS AIP deliverables. In summary, the protocol results in a traceability graph that can be extended to coordinate across research programmes. If implemented using appropriate technologies and harmonized with existing ontologies, this approach enables queries, sensitivity analyses, and visualization of complex relationships.

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

Hagerty, J. J.

1981-01-01

The Unimate robot was programmed for the final 35 cell pattern to be used in the fabrication of the deliverable modules. Mechanical construction of the Automated Lamination Station and Final Assembly Station were completed on schedule. All final wiring and interconnect cables were also completed and the first operational testing began. The final controlling program was written. A local fabricator was contracted to produce the glass reinforced concrete panels to be used for testing and deliverables. A video tape showing all three stations in operation was produced.

Synthesis of geological, structural, and geochronologic data (phase V, deliverable 53): Chapter A in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Bradley, Dwight C.; O'Sullivan, Paul; Cosca, Michael A.; Motts, Holly; Horton, John D.; Taylor, Cliff D.; Beaudoin, Georges; Lee, Gregory K.; Ramezani, Jahan; Bradley, Daniel N.; Jones, James V.; Bowring, Samuel

2015-01-01

This report is a companion to the new Geologic Map of Mauritania (Bradley and others, 2015; referred to herein as “Deliverable 51”) and the new Structural Geologic Map of Mauritania (Bradley and others, 2015a; referred to herein as “Deliverable 52”). Section 1 contains explanatory information for these two digital maps. Section 2 covers the analytical methods used in obtaining new U-Pb ages from 9 igneous rock samples, new detrital zircon ages from 40 sedimentary or metasedimentary rock samples, and new 40Ar/39Ar ages from 12 samples of metamorphic rocks and veins. Sections 3 through 6 present the new geochronological results, organized by region. In Section 7, we discuss implications of the new ages for the regional geology and discuss problematic results. Finally, in Section 8, we summarize the geology and tectonic evolution of Mauritania in narrative form, drawing on new and published information, in the context of global tectonics. The report is being released in both English and French. In both versions, we use the French-language names for formal stratigraphic units.

A new DoD initiative: the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program

NASA Astrophysics Data System (ADS)

Arevalo, S.; Atwood, C.; Bell, P.; Blacker, T. D.; Dey, S.; Fisher, D.; Fisher, D. A.; Genalis, P.; Gorski, J.; Harris, A.; Hill, K.; Hurwitz, M.; Kendall, R. P.; Meakin, R. L.; Morton, S.; Moyer, E. T.; Post, D. E.; Strawn, R.; Veldhuizen, D. v.; Votta, L. G.; Wynn, S.; Zelinski, G.

2008-07-01

In FY2008, the U.S. Department of Defense (DoD) initiated the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program, a 360M program with a two-year planning phase and a ten-year execution phase. CREATE will develop and deploy three computational engineering tool sets for DoD acquisition programs to use to design aircraft, ships and radio-frequency antennas. The planning and execution of CREATE are based on the 'lessons learned' from case studies of large-scale computational science and engineering projects. The case studies stress the importance of a stable, close-knit development team; a focus on customer needs and requirements; verification and validation; flexible and agile planning, management, and development processes; risk management; realistic schedules and resource levels; balanced short- and long-term goals and deliverables; and stable, long-term support by the program sponsor. Since it began in FY2008, the CREATE program has built a team and project structure, developed requirements and begun validating them, identified candidate products, established initial connections with the acquisition programs, begun detailed project planning and development, and generated the initial collaboration infrastructure necessary for success by its multi-institutional, multidisciplinary teams.

Earth Observing System (EOS)/Advanced Microwave Sounding Unit A (AMSU-A) configuration management plan

NASA Technical Reports Server (NTRS)

Cavanaugh, J.

1994-01-01

This plan describes methods and procedures Aerojet will follow in the implementation of configuration control for each established baseline. The plan is written in response to the GSFC EOS CM Plan 420-02-02, dated January 1990, and also meets he requirements specified in DOD-STD-480, DOD-D 1000B, MIL-STD-483A, and MIL-STD-490B. The plan establishes the configuration management process to be used for the deliverable hardware, software, and firmware of the EOS/AMSU-A during development, design, fabrication, test, and delivery. This revision includes minor updates to reflect Aerojet's CM policies.

Innovative Techniques for the Production of Low Cost 2D Laser Diode Arrays

DTIC Science & Technology

1991-11-26

electrically isolated and liquid cooled. (Deliverables: 5 5-bar arrays.) The following global issues not mentioned above will be investigated...house facet coating station. All global issues mentioned in Section 2.0 will be addressed and continuously investigated during this program. Very

Project Turnover Deliverables for the SY Farm Enraf Annulus Leak Detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

SCAIEF, C.C.

2000-09-19

This document identifies the deliverables that ensure the end user of the SY Farm Enraf Annulus Leak Detectors (ALD) has all the documentation and training required for operating and maintaining the new system. All deliverable items checked on the Acceptance For Beneficial Use (ABU) form have been completed and are available to the end user. This document was written as required by HNF-IP-0842, Volume IV section 3.12 Acceptance of Structures, Systems, and Components for Beneficial Use. This document applies to the deliverable documentation required to operate and maintain the SY Farm Enraf ALD System. Appendix A provides a copy ofmore » the ABU form as listed in the appendix of TWR-4092, Engineering Task Plan for the New SY Farm Annulus Leak Detectors. This document attests that all required deliverable items checked on the ABU have been completed and are available to the end user.« less

49 CFR 22.25 - Lender deliverables and delivery schedule.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Lender deliverables and delivery schedule. 22.25 Section 22.25 Transportation Office of the Secretary of Transportation SHORT-TERM LENDING PROGRAM (STLP) Participating Lenders § 22.25 Lender deliverables and delivery schedule. All Participating Lenders must adhere...

30 CFR 250.115 - How do I determine well producibility?

Code of Federal Regulations, 2010 CFR

2010-07-01

... well is an oil well, you must conduct a production test that lasts at least 2 hours after flow stabilizes. (d) If the well is a gas well, you must conduct a deliverability test that lasts at least 2 hours... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I determine well producibility? 250.115...

Teachers' Views of Inclusion: "I'd Rather Pump Gas."

ERIC Educational Resources Information Center

Vaughn, Sharon; And Others

The issue of inclusion has been at the forefront of attention in education, and has been widely discussed and debated. Since teachers will be the primary service deliverers of whatever inclusion practices are adopted, this study was conducted in an attempt better to understand teachers' understanding and perceptions of inclusion. Focus group…

Simultaneous optimization of photons and electrons for mixed beam radiotherapy

NASA Astrophysics Data System (ADS)

Mueller, S.; Fix, M. K.; Joosten, A.; Henzen, D.; Frei, D.; Volken, W.; Kueng, R.; Aebersold, D. M.; Stampanoni, M. F. M.; Manser, P.

2017-07-01

The aim of this work is to develop and investigate an inverse treatment planning process (TPP) for mixed beam radiotherapy (MBRT) capable of performing simultaneous optimization of photon and electron apertures. A simulated annealing based direct aperture optimization (DAO) is implemented to perform simultaneous optimization of photon and electron apertures, both shaped with the photon multileaf collimator (pMLC). Validated beam models are used as input for Monte Carlo dose calculations. Consideration of photon pMLC transmission during DAO and a weight re-optimization of the apertures after deliverable dose calculation are utilized to efficiently reduce the differences between optimized and deliverable dose distributions. The TPP for MBRT is evaluated for an academic situation with a superficial and an enlarged PTV in the depth, a left chest wall case including the internal mammary chain and a squamous cell carcinoma case. Deliverable dose distributions of MBRT plans are compared to those of modulated electron radiotherapy (MERT), photon IMRT and if available to those of clinical VMAT plans. The generated MBRT plans dosimetrically outperform the MERT, photon IMRT and VMAT plans for all investigated situations. For the clinical cases of the left chest wall and the squamous cell carcinoma, the MBRT plans cover the PTV similarly or more homogeneously than the VMAT plans, while OARs are spared considerably better with average reductions of the mean dose to parallel OARs and D 2% to serial OARs by 54% and 26%, respectively. Moreover, the low dose bath expressed as V 10% to normal tissue is substantially reduced by up to 45% compared to the VMAT plans. A TPP for MBRT including simultaneous optimization is successfully implemented and the dosimetric superiority of MBRT plans over MERT, photon IMRT and VMAT plans is demonstrated for academic and clinical situations including superficial targets with and without deep-seated part.

Simultaneous optimization of photons and electrons for mixed beam radiotherapy.

PubMed

Mueller, S; Fix, M K; Joosten, A; Henzen, D; Frei, D; Volken, W; Kueng, R; Aebersold, D M; Stampanoni, M F M; Manser, P

2017-06-26

The aim of this work is to develop and investigate an inverse treatment planning process (TPP) for mixed beam radiotherapy (MBRT) capable of performing simultaneous optimization of photon and electron apertures. A simulated annealing based direct aperture optimization (DAO) is implemented to perform simultaneous optimization of photon and electron apertures, both shaped with the photon multileaf collimator (pMLC). Validated beam models are used as input for Monte Carlo dose calculations. Consideration of photon pMLC transmission during DAO and a weight re-optimization of the apertures after deliverable dose calculation are utilized to efficiently reduce the differences between optimized and deliverable dose distributions. The TPP for MBRT is evaluated for an academic situation with a superficial and an enlarged PTV in the depth, a left chest wall case including the internal mammary chain and a squamous cell carcinoma case. Deliverable dose distributions of MBRT plans are compared to those of modulated electron radiotherapy (MERT), photon IMRT and if available to those of clinical VMAT plans. The generated MBRT plans dosimetrically outperform the MERT, photon IMRT and VMAT plans for all investigated situations. For the clinical cases of the left chest wall and the squamous cell carcinoma, the MBRT plans cover the PTV similarly or more homogeneously than the VMAT plans, while OARs are spared considerably better with average reductions of the mean dose to parallel OARs and D 2% to serial OARs by 54% and 26%, respectively. Moreover, the low dose bath expressed as V 10% to normal tissue is substantially reduced by up to 45% compared to the VMAT plans. A TPP for MBRT including simultaneous optimization is successfully implemented and the dosimetric superiority of MBRT plans over MERT, photon IMRT and VMAT plans is demonstrated for academic and clinical situations including superficial targets with and without deep-seated part.

76 FR 63916 - Transcontinental Gas Pipe Line Company, LLC; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... associated storage deliverability and capacity at the Eminence Storage Field (Eminence) in Covington County... Caverns 1, 2, 3, and 4, and reduce deliverability and capacity from 20.5 Bcf to 15.025 Bcf in Caverns 5, 6, and 7. Transco also seeks to partially abandon the total storage capacity and deliverability...

20 CFR 638.812 - State and local taxation of Job Corps deliverers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false State and local taxation of Job Corps deliverers. 638.812 Section 638.812 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF... § 638.812 State and local taxation of Job Corps deliverers. The Act provides that transactions conducted...

20 CFR 638.812 - State and local taxation of Job Corps deliverers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false State and local taxation of Job Corps deliverers. 638.812 Section 638.812 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF... § 638.812 State and local taxation of Job Corps deliverers. The Act provides that transactions conducted...

Reliability Modeling Development and Its Applications for Ceramic Capacitors with Base-Metal Electrodes (BMEs)

NASA Technical Reports Server (NTRS)

Liu, Donhang

2014-01-01

This presentation includes a summary of NEPP-funded deliverables for the Base-Metal Electrodes (BMEs) capacitor task, development of a general reliability model for BME capacitors, and a summary and future work.

Development of a Carbon Management Geographic Information System (GIS) for the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howard Herzog; Holly Javedan

In this project a Carbon Management Geographical Information System (GIS) for the US was developed. The GIS stored, integrated, and manipulated information relating to the components of carbon management systems. Additionally, the GIS was used to interpret and analyze the effect of developing these systems. This report documents the key deliverables from the project: (1) Carbon Management Geographical Information System (GIS) Documentation; (2) Stationary CO{sub 2} Source Database; (3) Regulatory Data for CCS in United States; (4) CO{sub 2} Capture Cost Estimation; (5) CO{sub 2} Storage Capacity Tools; (6) CO{sub 2} Injection Cost Modeling; (7) CO{sub 2} Pipeline Transport Costmore » Estimation; (8) CO{sub 2} Source-Sink Matching Algorithm; and (9) CO{sub 2} Pipeline Transport and Cost Model.« less

The Effect of Underwater Imagery Radiometry on 3d Reconstruction and Orthoimagery

NASA Astrophysics Data System (ADS)

Agrafiotis, P.; Drakonakis, G. I.; Georgopoulos, A.; Skarlatos, D.

2017-02-01

The work presented in this paper investigates the effect of the radiometry of the underwater imagery on automating the 3D reconstruction and the produced orthoimagery. Main aim is to investigate whether pre-processing of the underwater imagery improves the 3D reconstruction using automated SfM - MVS software or not. Since the processing of images either separately or in batch is a time-consuming procedure, it is critical to determine the necessity of implementing colour correction and enhancement before the SfM - MVS procedure or directly to the final orthoimage when the orthoimagery is the deliverable. Two different test sites were used to capture imagery ensuring different environmental conditions, depth and complexity. Three different image correction methods are applied: A very simple automated method using Adobe Photoshop, a developed colour correction algorithm using the CLAHE (Zuiderveld, 1994) method and an implementation of the algorithm described in Bianco et al., (2015). The produced point clouds using the initial and the corrected imagery are then being compared and evaluated.

The effect of statistical noise on IMRT plan quality and convergence for MC-based and MC-correction-based optimized treatment plans.

PubMed

Siebers, Jeffrey V

2008-04-04

Monte Carlo (MC) is rarely used for IMRT plan optimization outside of research centres due to the extensive computational resources or long computation times required to complete the process. Time can be reduced by degrading the statistical precision of the MC dose calculation used within the optimization loop. However, this eventually introduces optimization convergence errors (OCEs). This study determines the statistical noise levels tolerated during MC-IMRT optimization under the condition that the optimized plan has OCEs <100 cGy (1.5% of the prescription dose) for MC-optimized IMRT treatment plans.Seven-field prostate IMRT treatment plans for 10 prostate patients are used in this study. Pre-optimization is performed for deliverable beams with a pencil-beam (PB) dose algorithm. Further deliverable-based optimization proceeds using: (1) MC-based optimization, where dose is recomputed with MC after each intensity update or (2) a once-corrected (OC) MC-hybrid optimization, where a MC dose computation defines beam-by-beam dose correction matrices that are used during a PB-based optimization. Optimizations are performed with nominal per beam MC statistical precisions of 2, 5, 8, 10, 15, and 20%. Following optimizer convergence, beams are re-computed with MC using 2% per beam nominal statistical precision and the 2 PTV and 10 OAR dose indices used in the optimization objective function are tallied. For both the MC-optimization and OC-optimization methods, statistical equivalence tests found that OCEs are less than 1.5% of the prescription dose for plans optimized with nominal statistical uncertainties of up to 10% per beam. The achieved statistical uncertainty in the patient for the 10% per beam simulations from the combination of the 7 beams is ~3% with respect to maximum dose for voxels with D>0.5D(max). The MC dose computation time for the OC-optimization is only 6.2 minutes on a single 3 Ghz processor with results clinically equivalent to high precision MC computations.

Recording Cultural Heritage Using Terrestrial Laserscanning - Dealing with the System, the Huge Datasets they Create and Ways to Extract the Necessary Deliverables you can Work with

NASA Astrophysics Data System (ADS)

Christofori, E.; Bierwagen, J.

2013-07-01

Recording Cultural Heritage objects using terrestrial laserscanning becomes more and more popular over the last years. Since terrestrial Laserscanning System (TLS) Manufacturers have strongly increased the amount and speed of data captured with a single scan at each system upgrade and cutting down system costs the use of TLS Systems for recording cultural heritage is an option for recording worth to think about beside traditional methods like Photogrammetric. TLS Systems can be a great tool for capturing complex cultural heritage object within a short amount of time beside the traditional methods but can be a nightmare to handle for further process if not used right while capturing. Furthermore TLS Systems still have to be recognized as survey equipment, even though some of the manufactures promote them as everyday tool. They have to be used in an intelligent way having in mind the clients and the individual cultural objects needs. Thus the efficient way to use TLS Systems for data recording becomes a relevant topic to deal with the huge Amount of data the Systems collect while recording. Already small projects can turn into huge Pointcloud Datasets that End user, like Architects or Archaeologist neither can't deal with as their technical equipment doesn't fit the requirements of the Dataset nor do they have the software tools to use the Data as the current software tools still are high prized. Even the necessary interpretation of the Dataset can be a tough task if the people who have to work on with the Pointcloud aren't educated right in order to understand TLS and the results it creates. The use of TLS Systems has to have in mind the project requirements of the individual Heritage Object, like the required accuracy, standards for Levels of Details (e.g. "Empfehlungen für die Baudokumentation, Günther Eckstein, Germany"), the required kind of Deliverables (Visualization, 2D Drawings, True Deformation Drawings, 3D Models, BIM or 4D - Animations) as well as the Projects budget, restrictions and special conditions of the object. And if it's used in the right way TLS will fulfil all request and furthermore create additional recording, deliverable and financial benefit. Christofori und Partner is working with TLS Systems on cultural heritage Objects since 2005 trying to optimize the use of these systems (even in combining different systems like TLS, photogrammetric or new techniques) as well as creating useable deliverables for the Clients (Owner, Conservator, Designers and the Public) they can work on with.

Geographic information system development in the CARETS project

USGS Publications Warehouse

Mitchell, William B.; Fegeas, Robin G.; Fitzpatrick, Katherine A.; Hallam, Cheryl A.

1977-01-01

Experience in the development of a geographic information system to support the CARETS project has confirmed the considerable advantages that may accrue by paralleling the system development with a rational and balanced system production effort which permits the integration of the education and training of users with interim deliverable products to them. Those advantages include support for a long-term staff plan that recognizes substantial staff changes through system development and implementation, a fiscal plan that provides continuity in resources necessary for total system development, and a feedback system which allows the user to communicate his experiences in using the system. Thus far balance between system development and system production has not been achieved because of continuing large-scale spatial data processing requirements coupled with strong and insistent demands from users for immediately deliverable products from the system. That imbalance has refocussed staffing and fiscal plans from long-term system development to short- and near-term production requirements, continuously extends total system development time, and increases the possibility that later system development may reduce the usefulness of current interim products.

USDOT guidance summary for connected vehicle deployments performance measurement.

DOT National Transportation Integrated Search

2016-07-01

The document provides guidance to Pilot Deployers in the timely and successful completion of the Connected VehiclePilot Concept Development Phase deliverables, specifically in the area of performance measurement. Guidance isprovided in developing the...

USDOT guidance summary for connected vehicle deployments evaluation support.

DOT National Transportation Integrated Search

2016-07-01

The document provides guidance to Pilot Deployers in the timely and successful completion of Concept DevelopmentPhase deliverables, specifically in developing the Performance Measurement and Evaluation Support Plan in Task 5,identifying evaluation-su...

USDOT guidance summary for connected vehicle deployments : data sharing.

DOT National Transportation Integrated Search

2016-07-01

AbstractThe document provides guidance to Pilot Deployers in the timely and successful completion of Concept Development Phase deliverables, specifically in developing the Data Sharing Framework portion of the Performance Measurement and Evaluation S...

Incorporating deliverable monitor unit constraints into spot intensity optimization in intensity modulated proton therapy treatment planning

PubMed Central

Cao, Wenhua; Lim, Gino; Li, Xiaoqiang; Li, Yupeng; Zhu, X. Ronald; Zhang, Xiaodong

2014-01-01

The purpose of this study is to investigate the feasibility and impact of incorporating deliverable monitor unit (MU) constraints into spot intensity optimization in intensity modulated proton therapy (IMPT) treatment planning. The current treatment planning system (TPS) for IMPT disregards deliverable MU constraints in the spot intensity optimization (SIO) routine. It performs a post-processing procedure on an optimized plan to enforce deliverable MU values that are required by the spot scanning proton delivery system. This procedure can create a significant dose distribution deviation between the optimized and post-processed deliverable plans, especially when small spot spacings are used. In this study, we introduce a two-stage linear programming (LP) approach to optimize spot intensities and constrain deliverable MU values simultaneously, i.e., a deliverable spot intensity optimization (DSIO) model. Thus, the post-processing procedure is eliminated and the associated optimized plan deterioration can be avoided. Four prostate cancer cases at our institution were selected for study and two parallel opposed beam angles were planned for all cases. A quadratic programming (QP) based model without MU constraints, i.e., a conventional spot intensity optimization (CSIO) model, was also implemented to emulate the commercial TPS. Plans optimized by both the DSIO and CSIO models were evaluated for five different settings of spot spacing from 3 mm to 7 mm. For all spot spacings, the DSIO-optimized plans yielded better uniformity for the target dose coverage and critical structure sparing than did the CSIO-optimized plans. With reduced spot spacings, more significant improvements in target dose uniformity and critical structure sparing were observed in the DSIO- than in the CSIO-optimized plans. Additionally, better sparing of the rectum and bladder was achieved when reduced spacings were used for the DSIO-optimized plans. The proposed DSIO approach ensures the deliverability of optimized IMPT plans that take into account MU constraints. This eliminates the post-processing procedure required by the TPS as well as the resultant deteriorating effect on ultimate dose distributions. This approach therefore allows IMPT plans to adopt all possible spot spacings optimally. Moreover, dosimetric benefits can be achieved using smaller spot spacings. PMID:23835656

Automated Neuropsychological Assessment Metrics, Version 4 (ANAM4): Examination of Select Psychometric Properties and Administration Procedures

DTIC Science & Technology

2016-12-01

2017 was approved in August 2016. The supplemental project has 2 primary objectives: • Recommend cognitive assessment tools/approaches ( toolkit ) from...strategies for use in future military-relevant environments The supplemental project has two primary deliverables: • Proposed Toolkit of cognitive...6 Vet Final Report and Cognitive performance recommendations through Steering Committee Task 7 Provide Toolkit Report 16 Months 8-12 Task 8

Development of a Commercial Prototype of the Autonomous Pathogen Detection System Final Report CRADA No. TC-02077-04

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dzenitis, J. M.; Haigh, P.

This was a collaborative effort between The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL), and GE Ion Track, Inc. (GEIT) to develop a commercial prototype of the Autonomous Pathogen Detection System (APDS), an instrument that monitors the air for all three biological threat agents (bacteria, viruses and toxins). This was originally a one year CRADA project, with the cost of the work at LLNL being funded by the Department of Homeland Security's Office of National Laboratories. The original project consisted of five major tasks and deliverables. The CRADA was then amended, converting the CRADA from amore » programmatically funded CRADA to a funds-in CRADA, extending the project for an additional 14 months, and adding four new tasks and deliverable to the project.« less

Methane Hydrate Field Program: Development of a Scientific Plan for a Methane Hydrate-Focused Marine Drilling, Logging and Coring Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, Greg

This final report document summarizes the activities undertaken and the output from three primary deliverables generated during this project. This fifteen month effort comprised numerous key steps including the creation of an international methane hydrate science team, determining and reporting the current state of marine methane hydrate research, convening an international workshop to collect the ideas needed to write a comprehensive Marine Methane Hydrate Field Research Plan and the development and publication of that plan. The following documents represent the primary deliverables of this project and are discussed in summary level detail in this final report: Historical Methane Hydrate Projectmore » Review Report; Methane Hydrate Workshop Report; Topical Report: Marine Methane Hydrate Field Research Plan; and Final Scientific/Technical Report.« less

Preparing project managers for faster-better-cheaper robotic planetary missions

NASA Technical Reports Server (NTRS)

Gowler, P.; Atkins, K.

2003-01-01

The authors have developed and implemented a week-long workshop for Jet Propulsion Laboratory Project Managers, designed around the development phases of the JPL Project Life Cycle. The workshop emphasizes the specific activities and deliverables that pertain to JPL managers of NASA robotic space exploration and instrument development projects.

NASA RECON: Course development, administration, and evaluation. A research and development proposal

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Roquemore, Leroy

1984-01-01

This proposal addresses the development, administration, and evaluation of a set of transportable, college-level courses to educate science and engineering students in the effective use of automated scientific and technical information storage and retrieval systems, and, in particular, in the use of the NASA RECON system. Chapter 1 presents a brief introduction. Chapter 2 identifies general and specific objectives, i.e., needs analysis, course development, course administration, and course evaluation. Chapter 3 proposes the methodology to be used in successfully accomplishing these objectives. Chapter 4 highlights expected results and product deliverables, and Chapter 5 presents the project evaluation plan to be followed. Chapter 6 is a brief overview of the institutional resources available at the proposing institutions, i.e., at the University of Southwestern Louisiana and at Southern University to support the project. Chapter 7 proposes a budget, time schedule, and management plan. Chapter 8 is a summary of the foregoing.

Managers Handbook for Software Development

NASA Technical Reports Server (NTRS)

Agresti, W.; Mcgarry, F.; Card, D.; Page, J.; Church, V.; Werking, R.

1984-01-01

Methods and aids for the management of software development projects are presented. The recommendations are based on analyses and experiences with flight dynamics software development. The management aspects of organizing the project, producing a development plan, estimation costs, scheduling, staffing, preparing deliverable documents, using management tools, monitoring the project, conducting reviews, auditing, testing, and certifying are described.

Collaborative Undergraduate HBCU Student Summer Prostate Cancer Training Program

DTIC Science & Technology

2012-09-01

University Dr. Harry S. Clarke Hormone Supplementation and Risk for Prostate Cancer 16 Task 1 Deliverables: Twelve Student Fellows were...Addiction & Alcohol Dr. Corrigan Smothers July 17 H - Aspirin & NSAIDS Dr. Halushka July 20 C – Herbals & Cancer...M) Powerpoint Presentation Workshop July 20 (M) Alternative Careers in Science (12-1pm) Dr. Craig Plante, PhD July 21 (C) Herbals & Cancer

SU-E-T-106: Development of a Collision Prediction Algorithm for Determining Problematic Geometry for SBRT Treatments Using a Stereotactic Body Frame

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagar, M; Friesen, S; Mannarino, E

2014-06-01

Purpose: Collision between the gantry and the couch or patient during Radiotherapy is not a common concern for conventional RT (static fields or arc). With the increase in the application of stereotactic planning techniques to the body, collisions have become a greater concern. Non-coplanar beam geometry is desirable in stereotatic treatments in order to achieve sharp gradients and a high conformality. Non-coplanar geometry is less intuitive in the body and often requires an iterative process of planning and dry runs to guarantee deliverability. Methods: Purpose written software was developed in order to predict the likelihood of collision between the headmore » of the gantry and the couch, patient or stereotatic body frame. Using the DICOM plan and structures set, exported by the treatment planning system, this software is able to predict the possibility of a collision. Given the plan's isocenter, treatment geometry and exterior contours, the software is able to determine if a particular beam/arc is clinically deliverable or if collision is imminent. Results: The software was tested on real world treatment plans with untreatable beam geometry. Both static non-coplanar and VMAT plans were tested. Of these, the collision prediction software could identify all as having potentially problematic geometry. Re-plans of the same cases were also tested and validated as deliverable. Conclusion: This software is capable of giving good initial indication of deliverability for treatment plans that utilize complex geometry (SBRT) or have lateral isocenters. This software is not intended to replace the standard pre-treatment QA dry run. The effectiveness is limited to those portions of the patient and immobilization devices that have been included in the simulation CT and contoured in the planning system. It will however aid the planner in reducing the iterations required to create complex treatment geometries necessary to achieve ideal conformality and organ sparing.« less

Advanced bridge safety initiative : FRP flexural retrofit for concrete slab bridges - task 4 deliverables.

DOT National Transportation Integrated Search

2014-06-01

Concrete slab bridges are being examined as part of the MaineDOT Advanced Bridge Safety Initiative. Under Tasks : 1 3 a finite element analysis program is developed, validated and applied to twenty bridges. : Task 4 investigates and develops a no...

Landsat maps (phase V, deliverable 60), ASTER maps (phase V, deliverable 62), ASTER_DEM maps (phase V, deliverable 63), and spectral remote sensing in support of PRISM-II mineral resource assessment project, Islamic Republic of Mauritania (phase V, deliverables 61 and 64): Chapter E in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Rockwell, Barnaby W.; Knepper, Daniel H.; Horton, John D.

2015-01-01

The image products derived from Landsat TM and ASTER data enable the delineation of mineral groups across wide areas based on color response. Guides are provided that allow users to interpret these colors as to mineral group occurrence over lithologic units and known deposits. This information can be extrapolated to other geologically permissive tracts for various deposit types in the search for similar mineralogic responses that may be indicative of concealed deposits.

Developers and Deliverers: The Potential Dichotomy.

ERIC Educational Resources Information Center

Luoma-Overstreet, Kristine

1993-01-01

Examines the relationship between course developers and instructors in large corporations. Highlights include hiring practices for training department personnel; qualifications sought by the organization; self-report of competencies; separation of responsibilities; job frustrations; role of technology; and management's role in facilitating…

Beam commissioning and measurements validating the beam model in a new TPS that converts helical tomotherapy plans to step-and-shoot IMRT plans.

PubMed

Petersson, Kristoffer; Ceberg, Crister; Engström, Per; Knöös, Tommy

2011-01-01

A new type of treatment planning system called SHAREPLAN has been studied, which enables the transfer of treatment plans generated for helical tomotherapy delivery to plans that can be delivered on C-arm linacs. The purpose is to ensure continuous patient treatment during periods of unscheduled downtime for the TomoTherapy unit, particularly in clinics without a backup unit. The purpose of this work was to verify that the plans generated in this novel planning system are deliverable and accurate. The work consists primarily of beam commissioning, verification of the beam model, and measurements verifying that generated plans are deliverable with sufficient accuracy. The beam commissioning process involves input of general geometric properties of the modeled linac, profiles and depth dose curves for a specific photon nominal energy (6 MV), and the automated modeling of other beam properties. Some manual tuning of the beam model is required. To evaluate its accuracy, the confidence limit concept [J. Venselaar et al., "Tolerances for the accuracy of photon beam dose calculations of treatment planning systems," Radiother. Oncol. 60, 191-201 (2001)] was used, which is a method supported by ESTRO. Measurements were conducted with a 2D diode array at the commissioned linac as a final check of the beam model and to evaluate whether the generated plans were deliverable and accurate. The comparison and evaluation of calculated data points and measured data according to the method applied confirmed the accuracy of the beam model. The profiles had a confidence limit of 1.1% and the depth dose curves had a confidence limit of 1.7%, both of which were well below the tolerance limit of 2%. Plan specific QC measurements and evaluation verified that different plans generated in the TPS were deliverable with sufficient accuracy at the commissioned linac, as none of the 160 beams for the 20 different plans evaluated had a fraction of approved data points below 90%, the local clinical approval criterion for delivery QA measurements. This study is a validation of the new TPS as it verifies that the generated plans are deliverable at a commissioned linac with adequate accuracy. A thorough investigation of the treatment plan quality will require a separate study. The TPS is proving to be a useful and time-saving complement, especially for clinics having a single unit for helical delivery among its conventional linacs.

Feasibility of Nanoparticle-Guided Radiation Therapy (NGRT) Using a Conventional CT Scanner

DTIC Science & Technology

2010-10-01

deliverability of plan on CT scanner 2c. Calibrate dosimeters ( TLDs ) in phantom material 2d. Deliver dose distribution to phantom with TLDs in...phantom (SOW 2a). Next, small thermoluminescent dosimeters ( TLDs ) are placed within the tumor cavity. The TLDs are irradiated both with and without...nuclear data files. Electron interaction data is taken from the RSICC-EL03 library. The tumor volume was simulated as a small cavity containing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Temple, Brian Allen; Armstrong, Jerawan Chudoung

This document is a mid-year report on a deliverable for the PYTHON Radiography Analysis Tool (PyRAT) for project LANL12-RS-107J in FY15. The deliverable is deliverable number 2 in the work package and is titled “Add the ability to read in more types of image file formats in PyRAT”. Right now PyRAT can only read in uncompressed TIF files (tiff files). It is planned to expand the file formats that can be read by PyRAT, making it easier to use in more situations. A summary of the file formats added include jpeg, jpg, png and formatted ASCII files.

Linking secondary school physical education with community sport and recreation for girls: a process evaluation.

PubMed

Casey, Meghan M; Telford, Amanda; Mooney, Amanda; Harvey, Jack T; Eime, Rochelle M; Payne, Warren R

2014-10-06

The purpose of this study was to undertake a process evaluation to examine the reach, adoption and implementation of a school-community linked physical activity (PA) program for girls aged 12 - 15 years (School Years 7 - 9) using the RE-AIM framework. Various approaches were used to assess 'reach', 'adoption' and implementation: (a) a school environment survey of intervention schools (n = 6); (b) teacher feedback regarding the professional development component (91.1% response rate) and lesson implementation (60.8% response rate); and (c) post-intervention focus group interviews with physical education (PE) teachers (n = 29), students (n = 125), coaches (n = 13) and instructors (n = 8) regarding program experiences. Reach and Adoption: Seven schools (n = 1491 Year 7-9 female student enrolment; 70% adoption rate), five tennis clubs, eight football clubs and five leisure centres participated in the program during 2011. Program design and professional development opportunities (training, resource manual and opportunities to work with coaches and instructors during PE classes) supported implementation and student engagement in PA. However, there was a lack of individual and organisational readiness to adopt program principles. For some deliverers there were deeply embedded ideologies that were not aligned with the Game Sense teaching approach upon which the program was based. Further, cognitive components of the program such as self-management were not widely adopted as other components of the program tended to be prioritised. The program design and resources supported the success of the program, however, some aspects were not implemented as intended, which may have affected the likelihood of achieving further positive outcomes. Barriers to program implementation were identified and should be considered when designing school-community linked interventions. In particular, future programs should seek to assess and adjust for organizational readiness within the study design. For example, shared commitment and abilities of program deliverers to implement the program needs to be determined to support program implementation. ACTRN12614000446662. April 30th 2014.

Final report for tank 241-AP-108, grab samples 8AP-96-1, 8AP-96-2 and 8AP-96-FB

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esch, R.A.

1996-04-19

This document is the final report deliverable for the tank 241-AP-108 grab samples. The samples were subsampled and analyzed in accordance with the TSAP. Included in this report are the results for the Waste Compatibility analyses, with the exception of DSC and thermogravimetric analysis (TGA) results which were presented in the 45 Day report (Part 2 of this document). The raw data for all analyses, with the exception of DSC and TGA, are also included in this report.

A 3-D seismic investigation of the Ray gas storage reef, Macomb County, Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaefer, S.F.; Dixon, R.A.

1994-08-01

A 4.2 mi[sup 2] 3-D seismic survey was acquired over the Ray Niagaran reef gas storage field in southeast Michigan as part of a program to maximize storage capacity and gas deliverability of the storage reservoir. Goals of the survey were to (1) determine if additional storage capacity could be found either as extensions to the Ray reef or as undiscovered satellite reefs, (2) investigate the relationship between the main body and a low-relief gas well east of the reef, and (3) determine if seismic data can be used to quantify reservoir parameters to maximize the productive capacity of infillmore » wells. Interpretation of the 3-D seismic data resulted in a detailed image of the reef, using several interpretive techniques. A seismic reflection within the reef was correlated with a known porosity zone, and a possible relationship between porosity and seismic amplitude was investigated. A potential connection between the main reef and the low-relief gas well was identified. This project illustrates the economic value of investigating an existing storage reef with 3-D seismic data, and underscores the necessity of such a survey prior to developing a new storage reservoir.« less

The National Shipbuilding Research Program. Application of Industrial Engineering Techniques to Reduce Workers’ Compensation and Environmental Costs - Deliverable D

DTIC Science & Technology

1999-10-01

Electrostatic guns provide opportunities for exterior application of topcoats such as urethanes, acrylics , alkyds and epoxies. Most shipbuilding...A hybrid of airless spray and conventional air-atomized spray, this kind of gun uses fluid pressures higher than those used in conventional air...voltage) by simply flipping a switch. All essential controls are located right at the back of the gun. Other electrostatic systems require constant

17 CFR 36.2 - Exempt boards of trade.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Section 36.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION EXEMPT MARKETS § 36.2... deliverable supply; (ii) A deliverable supply that is sufficiently large, and a cash market sufficiently... manipulation; or (iii)No cash market. (2) The commodities that meet the criteria of paragraph (a)(1) of this...

17 CFR 36.2 - Exempt boards of trade.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 36.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION EXEMPT MARKETS § 36.2... deliverable supply; (ii) A deliverable supply that is sufficiently large, and a cash market sufficiently... manipulation; or (iii)No cash market. (2) The commodities that meet the criteria of paragraph (a)(1) of this...

17 CFR 36.2 - Exempt boards of trade.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Section 36.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION EXEMPT MARKETS § 36.2... deliverable supply; (ii) A deliverable supply that is sufficiently large, and a cash market sufficiently... manipulation; or (iii)No cash market. (2) The commodities that meet the criteria of paragraph (a)(1) of this...

Early Identification of SE-Related Program Risks

DTIC Science & Technology

2009-09-30

development of feasibility evidence for a 100-KSLOC project . It is good to note that the “sweet spots” are... models , or experiments with planned technologies and increasingly detailed analysis of development approaches and project productivity rates. The ...incomplete without the FED, it becomes a first-class project deliverable. This implies that it needs a plan for its development , and that each task

The Creative Deliverable: A Short Communication

ERIC Educational Resources Information Center

Hartel, Jenna; Noone, Rebecca; Oh, Christie

2017-01-01

This paper encourages educators in library and information science (LIS) to adopt the "creative deliverable," that is, an assignment that gives students the freedom to display their understanding of course material in an almost unrestricted range of alternative formats and genres, while retaining some key features of traditional…

Application of fuzzy logic-neural network based reinforcement learning to proximity and docking operations: Attitude control results

NASA Technical Reports Server (NTRS)

Jani, Yashvant

1992-01-01

As part of the RICIS activity, the reinforcement learning techniques developed at Ames Research Center are being applied to proximity and docking operations using the Shuttle and Solar Max satellite simulation. This activity is carried out in the software technology laboratory utilizing the Orbital Operations Simulator (OOS). This report is deliverable D2 Altitude Control Results and provides the status of the project after four months of activities and outlines the future plans. In section 2 we describe the Fuzzy-Learner system for the attitude control functions. In section 3, we provide the description of test cases and results in a chronological order. In section 4, we have summarized our results and conclusions. Our future plans and recommendations are provided in section 5.

Feasibility Study for Low Drag Acoustic Liners Final Report

NASA Technical Reports Server (NTRS)

Riedel, Brian; Wu, Jackie

2017-01-01

This report documents the design and structural analysis as a final deliverable for the Phase 1 contract activity. Also included is a community noise test plan, which is a key deliverable for Phase 2. Finally, a high-level estimate (Phase 3 deliverable) is provided for the work statement of Phases 2-4, which covers the build of two inlet test articles, planning and execution of a flight test with the test inlets, as well as data analysis and final documentation. The two test inlets will be compared to the production baseline inlet configuration. There is also a plan to test one of the inlets "hardwalled" using speed tape or some other similar tape to block the acoustic perforations.

A 3D seismic investigation of the Ray Gas Storage Reef in Macomb County, Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaefer, S.F.; Dixon, R.A.

1995-09-01

A 4.2 square mile 3D seismic survey was acquired over the Ray Niagaran Reef Gas Storage Field in southeast Michigan as part of a program to maximize storage capacity and gas deliverability of the field. Goals of the survey were: (1) to determine if additional storage capacity could be found, either as extensions to the main reef or as undiscovered satellite reefs, (2) to determine if 3D seismic data can be utilized to quantify reservoir parameters in order to maximize the productive capacity of infill wells, and (3) to investigate the relationship between the main reef body and a lowmore » relief/flow volume gas well east of the reef. Interpretation of the 3D seismic data resulted in a detailed image of the reef, using several interpretive techniques. A seismic reflection within the reef was correlated with a known porosity zone, and the relationship between porosity and seismic amplitude was investigated. A possible connection between the main reef and the low relief gas well was identified. This project illustrates the economic value of investigating an existing storage reef with 3D seismic data, and underscores the necessity of acquiring such a survey prior to developing a new storage reservoir.« less

Development and testing of the Solar Control Corporation modular controller and Solarstat subsystem

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1979-01-01

Results of development work on an existing controller and solarstat subsystem for use with solar heating and cooling systems are presented. The deliverable end items, program objectives, and how they were accomplished are described. It is shown that the products developed are marketable and suitable for public use.

Heuristic knowledge-based planning for single-isocenter stereotactic radiosurgery to multiple brain metastases.

PubMed

Ziemer, Benjamin P; Sanghvi, Parag; Hattangadi-Gluth, Jona; Moore, Kevin L

2017-10-01

Single-isocenter, volumetric-modulated arc therapy (VMAT) stereotactic radiosurgery (SRS) for multiple brain metastases (multimets) can deliver highly conformal dose distributions and reduce overall patient treatment time compared to other techniques. However, treatment planning for multimet cases is highly complex due to variability in numbers and sizes of brain metastases, as well as their relative proximity to organs-at-risk (OARs). The purpose of this study was to automate the VMAT planning of multimet cases through a knowledge-based planning (KBP) approach that adapts single-target SRS dose predictions to multiple target predictions. Using a previously published artificial neural network (ANN) KBP system trained on single-target, linac-based SRS plans, 3D dose distribution predictions for multimet patients were obtained by treating each brain lesion as a solitary target and subsequently combining individual dose predictions into a single distribution. Spatial dose distributions di(r→) for each of the i = 1…N lesions were merged using the combination function d(r→)=∑iNdin(r→)1/n. The optimal value of n was determined by minimizing root-mean squared (RMS) difference between clinical multimet plans and predicted dose per unit length along the line profile joining each lesion in the clinical cohort. The gradient measure GM=[3/4π]1/3V50%1/3-V100%1/3 is the primary quality metric for SRS plan evaluation at our institution and served as the main comparative metric between clinical plans and the KBP results. A total of 41 previously treated multimet plans, with target numbers ranging from N = 2-10, were used to validate the ANN predictions and subsequent KBP auto-planning routine. Fully deliverable KBP plans were developed by converting predicted dose distribution into patient-specific optimization objectives for the clinical treatment planning system (TPS). Plan parity was maintained through identical arc configuration and target normalization. Overall plan quality improvements were quantified by calculating the difference between SRS quality metrics (QMs): ΔQM = QM clinical  - QM KBP . In addition to GM, investigated QMs were: volume of brain receiving ≥ 10 Gy (V 10 Gy ), volume of brain receiving ≥ 5 Gy (ΔV 5 Gy ), heterogeneity index (HI), dose to 0.1 cc of the brainstem (D 0.1 cc ), dose to 1% of the optic chiasm (D 1% ), and interlesion dose (D IL ). In addition to this quantitative analysis, overall plan quality was assessed via blinded plan comparison of the manual and KBP treatment plans by SRS-specializing physicians. A dose combination factor of n = 8 yielded an integrated dose profile RMS difference of 2.9% across the 41-patient cohort. Multimet dose predictions exhibited ΔGM = 0.07 ± 0.10 cm against the clinical sample, implying either further normal tissue sparing was possible or that dose predictions were slightly overestimating achievable dose gradients. The latter is the more likely explanation, as this bias vanished when dose predictions were converted to deliverable KBP plans ΔGM = 0.00 ± 0.08 cm. Remaining QMs were nearly identical or showed modest improvements in the KBP sample. Equivalent QMs included: ΔV 10 Gy  = 0.37 ± 3.78 cc, ΔHI = 0.02 ± 0.08 and ΔD IL  = -2.22 ± 171.4 cGy. The KBP plans showed a greater degree of normal tissue sparing as indicated by brain ΔV 5 Gy  = 4.11± 24.05 cc, brainstem ΔD 0.1 cc  = 42.8 ± 121.4 cGy, and chiasm ΔD 1%  = 50.8 ± 83.0 cGy. In blinded review by SRS-specializing physicians, KBP-generated plans were deemed equivalent or superior in 32/41(78.1%) of the cases. Heuristic KBP-driven automated planning in linac-based, single-isocenter treatments for multiple brain metastases maintained or exceeded overall plan quality. © 2017 American Association of Physicists in Medicine.

Altarum restricted use technology study : interim report, deliverable 3.1 : list of invitees for the focus group

DOT National Transportation Integrated Search

2005-09-01

This study, an 18-month effort, seeks to apply restricted use technology to the mandates of MDOT. For Deliverable 3.1 described in the Work Plan governing the Altarum Restricted Use Technology Study, the Altarum project team is required to provide a ...

Los Angeles congestion reduction demonstration (Metro ExpressLanes). National evaluation : cost benefit analysis test plan.

DOT National Transportation Integrated Search

2002-04-01

The Theory of Operations document is one of a series of deliverables documenting the National Intelligent Transportation System (ITS) Architecture developed under contract to the U.S. Department of Transportation (DOT). The Theory of Operations Docum...

Design and Evaluation of Scour for Bridges Using HEC-18 : technical brief.

DOT National Transportation Integrated Search

2017-07-01

This project developed a new approach for evaluating erosive scour at New Jersey bridges over non-tidal waterways. The main deliverable was the Scour Evaluation Model (SEM), which offers new analysis procedures, while still retaining the applicable p...

Manager's handbook for software development, revision 1

NASA Technical Reports Server (NTRS)

1990-01-01

Methods and aids for the management of software development projects are presented. The recommendations are based on analyses and experiences of the Software Engineering Laboratory (SEL) with flight dynamics software development. The management aspects of the following subjects are described: organizing the project, producing a development plan, estimating costs, scheduling, staffing, preparing deliverable documents, using management tools, monitoring the project, conducting reviews, auditing, testing, and certifying.

SU-F-T-344: Commissioning Constant Dose Rate VMAT in the Raystation Treatment Planning System for a Varian Clinac IX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pursley, J; Gueorguiev, G; Prichard, H

Purpose: To demonstrate the commissioning of constant dose rate volumetric modulated arc therapy (VMAT) in the Raystation treatment planning system for a Varian Clinac iX with Exact couch. Methods: Constant dose rate (CDR) VMAT is an option in the Raystation treatment planning system, enabling VMAT delivery on Varian linacs without a RapidArc upgrade. Raystation 4.7 was used to commission CDR-VMAT for a Varian Clinac iX. Raystation arc model parameters were selected to match machine deliverability characteristics. A Varian Exact couch model was added to Raystation 4.7 and commissioned for use in VMAT optimization. CDR-VMAT commissioning checks were performed on themore » linac, including patient-specific QA measurements for 10 test patients using both the ArcCHECK from Sun Nuclear Corporation and COMPASS from IBA Dosimetry. Multi-criteria optimization (MCO) in Raystation was used for CDR-VMAT planning. Results: Raystation 4.7 generated clinically acceptable and deliverable CDR-VMAT plans for the Varian Clinac. VMAT plans were optimized including a model of the Exact couch with both rails in the out positions. CDR-VMAT plans generated with MCO in Raystation were dosimetrically comparable to Raystation MCO-generated IMRT plans. Patient-specific QA measurements with the ArcCHECK on the couch showed good agreement with the treatment planning system prediction. Patient-specific, structure-specific, multi-statistical parameter 3D QA measurements with gantry-mounted COMPASS also showed good agreement. Conclusion: Constant dose rate VMAT was successfully modeled in Raystation 4.7 for a Varian Clinac iX, and Raystation’s multicriteria optimization generated constant dose rate VMAT plans which were deliverable and dosimetrically comparable to IMRT plans.« less

48 CFR 246.370 - Material inspection and receiving report.

Code of Federal Regulations, 2012 CFR

2012-10-01

... deliverable is a scientific or technical report; (5) Research and development contracts not requiring the... receiving report. 246.370 Section 246.370 Federal Acquisition Regulations System DEFENSE ACQUISITION... Material inspection and receiving report. (a) Use the clause at 252.246-7000, Material Inspection and...

48 CFR 246.370 - Material inspection and receiving report.

Code of Federal Regulations, 2014 CFR

2014-10-01

... deliverable is a scientific or technical report; (5) Research and development contracts not requiring the... receiving report. 246.370 Section 246.370 Federal Acquisition Regulations System DEFENSE ACQUISITION... Material inspection and receiving report. (a) Use the clause at 252.246-7000, Material Inspection and...

A Report on Deliverable Five: Evaluate Current Commercially Available Suction Pump Devices for Use in Prehospital Combat Care

DTIC Science & Technology

Develop a consumer-style report for currently available suction pump devices on the market . List parameters such as suction flow rate, pressure...evaluate whether suction devices that are currently on the market meet these requirements.

Surface electrical properties experiment, part 1. [for measuring lunar surface electrical properties

NASA Technical Reports Server (NTRS)

Kupfer, W. S. (Compiler)

1973-01-01

The design evolution, hardware development, and production history of the surface electrical properties (SEP) experiment are discussed. The SEP transmitter and receiver were designed to be used on the lunar surface during the Apollo 17 mission. The equipment was used to measure lunar surface electrical properties over traverses totalling more than 8 kilometers, for a duration of more than 100 minutes. A comprehensive outline of the techniques, is given along with a simplified detailed breakdown of equipment description and function to outline the principles of operation. A history of the design evolution with trade-off criteria and emphasis on changes caused by decisions reached in solving problems inherent in a fast-paced development program are presented from the viewpoint of overall design concept and in detail for each item of deliverable hardware. There is a brief account of lunar operations.

Applied statistical training to strengthen analysis and health research capacity in Rwanda.

PubMed

Thomson, Dana R; Semakula, Muhammed; Hirschhorn, Lisa R; Murray, Megan; Ndahindwa, Vedaste; Manzi, Anatole; Mukabutera, Assumpta; Karema, Corine; Condo, Jeanine; Hedt-Gauthier, Bethany

2016-09-29

To guide efficient investment of limited health resources in sub-Saharan Africa, local researchers need to be involved in, and guide, health system and policy research. While extensive survey and census data are available to health researchers and program officers in resource-limited countries, local involvement and leadership in research is limited due to inadequate experience, lack of dedicated research time and weak interagency connections, among other challenges. Many research-strengthening initiatives host prolonged fellowships out-of-country, yet their approaches have not been evaluated for effectiveness in involvement and development of local leadership in research. We developed, implemented and evaluated a multi-month, deliverable-driven, survey analysis training based in Rwanda to strengthen skills of five local research leaders, 15 statisticians, and a PhD candidate. Research leaders applied with a specific research question relevant to country challenges and committed to leading an analysis to publication. Statisticians with prerequisite statistical training and experience with a statistical software applied to participate in class-based trainings and complete an assigned analysis. Both statisticians and research leaders were provided ongoing in-country mentoring for analysis and manuscript writing. Participants reported a high level of skill, knowledge and collaborator development from class-based trainings and out-of-class mentorship that were sustained 1 year later. Five of six manuscripts were authored by multi-institution teams and submitted to international peer-reviewed scientific journals, and three-quarters of the participants mentored others in survey data analysis or conducted an additional survey analysis in the year following the training. Our model was effective in utilizing existing survey data and strengthening skills among full-time working professionals without disrupting ongoing work commitments and using few resources. Critical to our success were a transparent, robust application process and time limited training supplemented by ongoing, in-country mentoring toward manuscript deliverables that were led by Rwanda's health research leaders.

Inhibition of tumor angiogenesis and tumor growth by the DSL domain of human Delta-like 1 targeted to vascular endothelial cells.

PubMed

Zhao, Xing-Cheng; Dou, Guo-Rui; Wang, Li; Liang, Liang; Tian, Deng-Mei; Cao, Xiu-Li; Qin, Hong-Yan; Wang, Chun-Mei; Zhang, Ping; Han, Hua

2013-07-01

The growth of solid tumors depends on neovascularization. Several therapies targeting tumor angiogenesis have been developed. However, poor response in some tumors and emerging resistance necessitate further investigations of new drug targets. Notch signal pathway plays a pivotal role in vascular development and tumor angiogenesis. Either blockade or forced activation of this pathway can inhibit angiogenesis. As blocking Notch pathway results in the formation of vascular neoplasm, activation of Notch pathway to prevent tumor angiogenesis might be an alternative choice. However, an in vivo deliverable reagent with highly efficient Notch-activating capacity has not been developed. Here, we generated a polypeptide, hD1R, which consists of the Delta-Serrate-Lag-2 fragment of the human Notch ligand Delta-like 1 and an arginine-glycine-aspartate (RGD) motif targeting endothelial cells (ECs). We showed that hD1R could bind to ECs specifically through its RGD motif and effectively triggered Notch signaling in ECs. We demonstrated both in vitro and in vivo that hD1R inhibited angiogenic sprouting and EC proliferation. In tumor-bearing mice, the injection of hD1R effectively repressed tumor growth, most likely through increasing tumor hypoxia and tissue necrosis. The amount and width of vessels reduced remarkably in tumors of mice treated with hD1R. Moreover, vessels in tumors of mice treated with hD1R recruited more NG2(+) perivascular cells and were better perfused. Combined application of hD1R and chemotherapy with cisplatin and teniposide revealed that these two treatments had additive antitumor effects. Our study provided a new strategy for antiangiogenic tumor therapy.

Evaluation and Validation (E&V) Team Public Report Volume 4

DTIC Science & Technology

1989-01-01

group’s accomplishments include: a proposal for developing new technology including enhancements to ACEC (from a prioritized list of requirements) and...SEVWG) Status Report SEVWG reported no deliverables due. The group’s accomplishments include: the Guidebook entry for CAIS/CAIS-A; interchange meeting

Assessment of the Adequacy of East Coast and Gulf Mexico Port Infrastructure to Accommodate Trade with Mexico

DOT National Transportation Integrated Search

2002-06-01

This Market Packages document is one of a series of deliverables documenting the National Intelligent Transportation System (ITS) Architecture developed under contract to the U.S. Department of Transportation (DOT). This document defines the Market P...

Competent Systems: Effective, Efficient, Deliverable.

ERIC Educational Resources Information Center

Abramson, Bruce

Recent developments in artificial intelligence and decision analysis suggest reassessing the approaches commonly taken to the design of knowledge-based systems. Competent systems are based on models known as influence diagrams, which graphically capture a domain's basic objects and their interrelationships. Among the benefits offered by influence…

78 FR 35338 - Self-Regulatory Organizations; BOX Options Exchange LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... trading option contracts overlying 1,000 SPDR[supreg] S&P 500[supreg] exchange-traded fund shares (``SPY''),\\3\\ or (``Jumbo SPY Options'').\\4\\ Whereas standard options contracts represent a deliverable of 100... the number of deliverable shares, Jumbo SPY Options have the same terms and contract characteristics...

A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

ERIC Educational Resources Information Center

Yu, Wei

2013-01-01

This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

Agile Learning: Sprinting through the Semester

ERIC Educational Resources Information Center

Lang, Guido

2017-01-01

This paper introduces agile learning, a novel pedagogical approach that applies the processes and principles of agile software development to the context of learning. Agile learning is characterized by short project cycles, called sprints, in which a usable deliverable is fully planned, designed, built, tested, reviewed, and launched. An…

Deliverable P1 study 0-6132.

DOT National Transportation Integrated Search

2012-09-01

Study 0-6132 has promoted the development and implementation of the balanced mix design (BMD) approach for selecting the optimal asphalt content for all of TxDOTs hot mix asphalts (HMA), including Item 341. In this approach the engineering propert...

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

Guidance for improving foundation layers to increase pavement performance on local roads.

DOT National Transportation Integrated Search

2014-11-01

This document is the second of two deliverables for the project Optimizing Pavement Base, Subbase, and Subgrade Layers : for Cost and Performance on Local Roads (TR-640). The first deliverable is the 454-page Final Field Data Report. The field : data...

Elementary Principals as Developers vs. Deliverers of District Instructional Decisions

ERIC Educational Resources Information Center

Fields, Joshua Paul

2012-01-01

The purpose of this heuristic case study, also informed through the tradition of critical systems theory was to explore elementary principals' "voices" in instructional decisions made by central office administrators at a large suburban school district in a Midwestern State. Six elementary principals were interviewed for this study.…

TH-EF-BRB-04: 4π Dynamic Conformal Arc Therapy Dynamic Conformal Arc Therapy (DCAT) for SBRT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiu, T; Long, T; Tian, Z.

2016-06-15

Purpose: To develop an efficient and effective trajectory optimization methodology for 4π dynamic conformal arc treatment (4π DCAT) with synchronized gantry and couch motion; and to investigate potential clinical benefits for stereotactic body radiation therapy (SBRT) to breast, lung, liver and spine tumors. Methods: The entire optimization framework for 4π DCAT inverse planning consists of two parts: 1) integer programming algorithm and 2) particle swarm optimization (PSO) algorithm. The integer programming is designed to find an optimal solution for arc delivery trajectory with both couch and gantry rotation, while PSO minimize a non-convex objective function based on the selected trajectorymore » and dose-volume constraints. In this study, control point interaction is explicitly taken into account. Beam trajectory was modeled as a series of control points connected together to form a deliverable path. With linear treatment planning objectives, a mixed-integer program (MIP) was formulated. Under mild assumptions, the MIP is tractable. Assigning monitor units to control points along the path can be integrated into the model and done by PSO. The developed 4π DCAT inverse planning strategy is evaluated on SBRT cases and compared to clinically treated plans. Results: The resultant dose distribution of this technique was evaluated between 3D conformal treatment plan generated by Pinnacle treatment planning system and 4π DCAT on a lung SBRT patient case. Both plans share the same scale of MU, 3038 and 2822 correspondingly to 3D conformal plan and 4π DCAT. The mean doses for most of OARs were greatly reduced at 32% (cord), 70% (esophagus), 2.8% (lung) and 42.4% (stomach). Conclusion: Initial results in this study show the proposed 4π DCAT treatment technique can achieve better OAR sparing and lower MUs, which indicates that the developed technique is promising for high dose SBRT to reduce the risk of secondary cancer.« less

Interim report deliverable 1.1 : RADAR sensors for transportation applications of the restricted use technology study

DOT National Transportation Integrated Search

2005-09-30

Under Deliverable 1.1 of the Work Plan governing the Altarum Restricted Use Technology Study, the Altarum project team is required to produce an unclassified summary and comprehensive written report of RADAR systems that can potentially address trans...

Interim report deliverable 2.1 : electro-optical sensors for transportation applications of the restricted use technology study

DOT National Transportation Integrated Search

2005-09-30

Under Deliverable 2.1 of the Work Plan governing the Altarum Restricted Use Technology Study, the Altarum project team is required to produce an unclassified summary and comprehensive written report of Electro-Optical (EO) systems that can potentiall...

Finite Element Development and Specifications of a Patched, Recessed Nomex Core Honeycomb Panel for Increased Sound Transmission Loss

NASA Technical Reports Server (NTRS)

Grosveld, Ferdinand W.

2007-01-01

This informal report summarizes the development and the design specifications of a recessed nomex core honeycomb panel in fulfillment of the deliverable in Task Order 13RBE, Revision 10, Subtask 17. The honeycomb panel, with 0.020-inch thick aluminum face sheets, has 0.016-inch thick aluminum patches applied to twenty-five, 6 by 6 inch, quarter inch thick recessed cores. A 10 dB higher transmission loss over the frequency range 250 - 1000 Hz was predicted by a MSC/NASTRAN finite element model when compared with the transmission loss of the base nomex core honeycomb panel. The static displacement, due to a unit force applied at either the core or recessed core area, was of the same order of magnitude as the static displacement of the base honeycomb panel when exposed to the same unit force. The mass of the new honeycomb design is 5.1% more than the base honeycomb panel. A physical model was constructed and is being tested.

TH-CD-209-01: A Greedy Reassignment Algorithm for the PBS Minimum Monitor Unit Constraint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Y; Kooy, H; Craft, D

2016-06-15

Purpose: To investigate a Greedy Reassignment algorithm in order to mitigate the effects of low weight spots in proton pencil beam scanning (PBS) treatment plans. Methods: To convert a plan from the treatment planning system’s (TPS) to a deliverable plan, post processing methods can be used to adjust the spot maps to meets the minimum MU constraint. Existing methods include: deleting low weight spots (Cut method), or rounding spots with weight above/below half the limit up/down to the limit/zero (Round method). An alternative method called Greedy Reassignment was developed in this work in which the lowest weight spot in themore » field was removed and its weight reassigned equally among its nearest neighbors. The process was repeated with the next lowest weight spot until all spots in the field were above the MU constraint. The algorithm performance was evaluated using plans collected from 190 patients (496 fields) treated at our facility. The evaluation criteria were the γ-index pass rate comparing the pre-processed and post-processed dose distributions. A planning metric was further developed to predict the impact of post-processing on treatment plans for various treatment planning, machine, and dose tolerance parameters. Results: For fields with a gamma pass rate of 90±1%, the metric has a standard deviation equal to 18% of the centroid value. This showed that the metric and γ-index pass rate are correlated for the Greedy Reassignment algorithm. Using a 3rd order polynomial fit to the data, the Greedy Reassignment method had 1.8 times better metric at 90% pass rate compared to other post-processing methods. Conclusion: We showed that the Greedy Reassignment method yields deliverable plans that are closest to the optimized-without-MU-constraint plan from the TPS. The metric developed in this work could help design the minimum MU threshold with the goal of keeping the γ-index pass rate above an acceptable value.« less

Bio-fuels energy policy and grain transportation flows : implications for inland waterways and short sea shipping.

DOT National Transportation Integrated Search

2010-09-15

This project develops a foundation for analysis of the effects of U.S. biofuel energy policy on domestic : and international grain flows and patterns. The primary deliverable of this project is an updated and : expanded spatial equilibrium model of w...

Preliminary Analysis of Double Shell Tomography Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pascucci, V

2009-01-16

In this project we have collaborated with LLNL scientists Dr. Peer-Timo Bremer while performing our research work on algorithmic solutions for geometric processing, image segmentation and data streaming. The main deliverable has been a 3D viewer for high-resolution imaging data with particular focus on the presentation of orthogonal slices of the double shell tomography dataset. Basic probing capabilities allow querying single voxels in the data to study in detail the information presented to the user and compensate for the intrinsic filtering and imprecision due to visualization based on colormaps. On the algorithmic front we have studied the possibility of usingmore » of non-local means filtering algorithm to achieve noise removal from tomography data. In particular we have developed a prototype that implements an accelerated version of the algorithm that may be able to take advantage of the multi-resolution sub-sampling of the ViSUS format. We have achieved promising results. Future plans include the full integration of the non-local means algorithm in the ViSUS frameworks and testing if the accelerated method will scale properly from 2D images to 3D tomography data.« less

3D animation in three dimensions: the rocky road to the obvious

NASA Astrophysics Data System (ADS)

Murray, Hugh

2006-02-01

That animation created using CG modeling and animation tools is inherently three-dimensional is well known. In the middle to late nineties IMAX Corporation began actively exploring CG animated features as a possible source of economically viable content for its rapidly growing network of stereoscopic IMAX® 3D theatres. The journey from there to the spectacular success of the IMAX® 3D version of The Polar Express is an interesting mix of technical, creative and production challenges. For example 3D animations often have 2D elements and include many sequences that have framing, composition and lens choices that a stereographer would have avoided had 3D been part of the recipe at the outset. And of course the decision to ask for a second set of deliverables from an already stressed production takes nerve. The talk will cover several of these issues and explain why the unique viewing experience enabled by the wideangle geometry of IMAX® 3D theatres makes it worth all the pain.

Community-deliverable exercise and anxiety in adults with arthritis and other rheumatic diseases: a protocol for a systematic review and meta-analysis of randomised controlled trials.

PubMed

Kelley, George A; Kelley, Kristi S; Callahan, Leigh F

2017-03-06

While anxiety is a major public health problem in adults with arthritis and other rheumatic diseases (AORD), the effects of exercise on anxiety in adults are not well established despite numerous studies on this topic. The purpose of this study is to conduct a systematic review with an aggregate data meta-analysis to determine the effects of community-deliverable exercise interventions (aerobic, strength training or both) on anxiety in adults with AORD. Randomised controlled exercise intervention trials ≥4 weeks and published in any language up to 31 December 2016 will be included. Studies will be retrieved by searching 8 electronic databases, cross-referencing and expert review. Dual selection and abstraction of data will occur. The primary outcome will be changes in anxiety. Risk of bias will be assessed using the Cochrane risk of bias assessment instrument while confidence in the cumulative evidence will be assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) instrument. Standardised effect sizes for anxiety will be calculated from each study and then pooled using the inverse variance heterogeneity (IVhet) model. Meta-regression based on the IVhet model will be used to examine the relationship between changes in anxiety and selected covariates. The results of this study will be presented at a professional conference and published in a peer-reviewed journal. CRD42016048728. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

A Report on Deliverable Four: Develop a specifications list for a portable, lightweight prehospital suction device

DTIC Science & Technology

reflect it. There are commercially available manual and powered suction devices on the market , and several are specifically advertised for use in...combine to suggest that no device on the market meets even the most basic requirements of being small, lightweight, rugged, and demonstrating adequate

A Report on Deliverable Six: Develop a Concept Design for a Ruggedized, Lightweight, Portable, Powered Handheld Suction Device

DTIC Science & Technology

reflect it. There are commercially available manual and powered suction devices on the market , and several are specifically advertised for use in...combine to suggest that no device on the market meets even the most basic requirements of being small, lightweight, rugged, and demonstrating adequate

The M-Integral for Computing Stress Intensity Factors in Generally Anisotropic Materials

NASA Technical Reports Server (NTRS)

Warzynek, P. A.; Carter, B. J.; Banks-Sills, L.

2005-01-01

The objective of this project is to develop and demonstrate a capability for computing stress intensity factors in generally anisotropic materials. These objectives have been met. The primary deliverable of this project is this report and the information it contains. In addition, we have delivered the source code for a subroutine that will compute stress intensity factors for anisotropic materials encoded in both the C and Python programming languages and made available a version of the FRANC3D program that incorporates this subroutine. Single crystal super alloys are commonly used for components in the hot sections of contemporary jet and rocket engines. Because these components have a uniform atomic lattice orientation throughout, they exhibit anisotropic material behavior. This means that stress intensity solutions developed for isotropic materials are not appropriate for the analysis of crack growth in these materials. Until now, a general numerical technique did not exist for computing stress intensity factors of cracks in anisotropic materials and cubic materials in particular. Such a capability was developed during the project and is described and demonstrated herein.

Conservation paleobiology: Leveraging knowledge of the past to inform conservation and restoration

USGS Publications Warehouse

Dietl, Gregory P.; Kidwell, Susan M.; Brenner, Mark; Burney, David A.; Flessa, Karl W.; Jackson, Stephen T.; Koch, Paul L.

2015-01-01

Humans now play a major role in altering Earth and its biota. Finding ways to ameliorate human impacts on biodiversity and to sustain and restore the ecosystem services on which we depend is a grand scientific and societal challenge. Conservation paleobiology is an emerging discipline that uses geohistorical data to meet these challenges by developing and testing models of how biota respond to environmental stressors. Here we (a) describe how the discipline has already provided insights about biotic responses to key environmental stressors, (b) outline research aimed at disentangling the effects of multiple stressors, (c) provide examples of deliverables for managers and policy makers, and (d) identify methodological advances in geohistorical analysis that will foster the next major breakthroughs in conservation outcomes. We highlight cases for which exclusive reliance on observations of living biota may lead researchers to erroneous conclusions about the nature and magnitude of biotic change, vulnerability, and resilience.

Conservation Paleobiology: Leveraging Knowledge of the Past to Inform Conservation and Restoration

NASA Astrophysics Data System (ADS)

Dietl, Gregory P.; Kidwell, Susan M.; Brenner, Mark; Burney, David A.; Flessa, Karl W.; Jackson, Stephen T.; Koch, Paul L.

2015-05-01

Humans now play a major role in altering Earth and its biota. Finding ways to ameliorate human impacts on biodiversity and to sustain and restore the ecosystem services on which we depend is a grand scientific and societal challenge. Conservation paleobiology is an emerging discipline that uses geohistorical data to meet these challenges by developing and testing models of how biota respond to environmental stressors. Here we (a) describe how the discipline has already provided insights about biotic responses to key environmental stressors, (b) outline research aimed at disentangling the effects of multiple stressors, (c) provide examples of deliverables for managers and policy makers, and (d) identify methodological advances in geohistorical analysis that will foster the next major breakthroughs in conservation outcomes. We highlight cases for which exclusive reliance on observations of living biota may lead researchers to erroneous conclusions about the nature and magnitude of biotic change, vulnerability, and resilience.

STATS SRS v11.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piscotty, M A; Nazario, O L

2007-06-20

The objective of this project is the delivery of an application that will provide a unified, web-based system for collecting, verifying and analyzing the achievements for Laboratory employees. The application will enable individual Directorates to manage and report achievement record data for their employees using an LLNL standard web browser. In addition, cross directorate data reporting and analysis will be available for such organizations as LSTO and programmatic directorates. This system is intended to store reference data and metadata for employee achievements. Abstracts and entire publications will not be stored in this system.Directorates are expected to use this system atmore » all levels of management in preparing for Annual Self-Assessments, peer reviews, LDRD reviews, work force reviews, performance appraisals, and requests from sponsors. This document represents the primary deliverable for the Requirements Definition stage of system development. As part of a successful Requirements Definition, this document provides the development staff, the project sponsor, and the user community with a clear understanding of the product's operational, data, and other requirements. With this understanding, the development staff will take the opportunity to refine estimates regarding the cost, schedule, and deliverables reflected in it.« less

SU-F-BRB-07: A Plan Comparison Tool to Ensure Robustness and Deliverability in Online-Adaptive Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, P; Labby, Z; Bayliss, R A

Purpose: To develop a plan comparison tool that will ensure robustness and deliverability through analysis of baseline and online-adaptive radiotherapy plans using similarity metrics. Methods: The ViewRay MRIdian treatment planning system allows export of a plan file that contains plan and delivery information. A software tool was developed to read and compare two plans, providing information and metrics to assess their similarity. In addition to performing direct comparisons (e.g. demographics, ROI volumes, number of segments, total beam-on time), the tool computes and presents histograms of derived metrics (e.g. step-and-shoot segment field sizes, segment average leaf gaps). Such metrics were investigatedmore » for their ability to predict that an online-adapted plan reasonably similar to a baseline plan where deliverability has already been established. Results: In the realm of online-adaptive planning, comparing ROI volumes offers a sanity check to verify observations found during contouring. Beyond ROI analysis, it has been found that simply editing contours and re-optimizing to adapt treatment can produce a delivery that is substantially different than the baseline plan (e.g. number of segments increased by 31%), with no changes in optimization parameters and only minor changes in anatomy. Currently the tool can quickly identify large omissions or deviations from baseline expectations. As our online-adaptive patient population increases, we will continue to develop and refine quantitative acceptance criteria for adapted plans and relate them historical delivery QA measurements. Conclusion: The plan comparison tool is in clinical use and reports a wide range of comparison metrics, illustrating key differences between two plans. This independent check is accomplished in seconds and can be performed in parallel to other tasks in the online-adaptive workflow. Current use prevents large planning or delivery errors from occurring, and ongoing refinements will lead to increased assurance of plan quality.« less

78 FR 7835 - Self-Regulatory Organizations; BOX Options Exchange LLC; Notice of Filing of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... at $145 per share would carry a total deliverable value of $145,000, and the strike price would be... Jumbo option strike price of $145 was trading at $146 per share, the intrinsic $1 per share value would... Shares Deliverable Upon Exercise 100 shares........ 1,000 shares Strike Price if underlying is 45 45 $45...

The Additive Impact of Group and Individual Publicly Displayed Feedback: Examining Individual Response Patterns and Response Generalization in a Safe-Driving Occupational Intervention

ERIC Educational Resources Information Center

Ludwig, Timothy D.; Geller, E. Scott; Clarke, Steven W.

2010-01-01

Additive effects of publicly posting individual feedback following group goal-setting and feedback were evaluated. The turn-signal use of pizza deliverers was studied in a multiple baseline design across two pizza stores. After baseline observations, pizza deliverers voted on a group turn-signal goal and then received 4 weeks of group feedback on…

Natural gas: It's headed from surplus to shortage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parent, L.V.

1988-02-01

Reserve additions in the lower 48 states are not keeping up with the current rate of production, and deliverability surplus will soon become deliverability shortfall during periods of extended peak demand. Surplus deliverability will likely fade away, inasmuch as gas well completions are less than half of what they were when additions exceeded the current production rate of 16 tcf/year, and the outlook for a sharp increase in completions is bleak. Demand, lackluster before the recent cold weather, is likely to suffer some loss in markets where lower resid prices can switch loads back to oil. Year-end '87 price spikesmore » were a welcome relief to spot gas sellers, but low reside prices have already put a lid on what industrial users and power plants will pay. As an immature market struggles to develop structure in a quasi-deregulated environment, the Ferc is reduced to tinkering with the minutiae of Order 500, as it seeks to create a compromise that would be equally unsatisfactory to all. Canada is increasing its stake in the game. Canadian producers demonstrated their willingness to accept 1987's low price levels and be players. It will be another problem year for U.S. producers, as price relief for spot gas is more than offset by the Order 500 dilemma and drilling cost increases exceed wellhead price increases. Canadian gas will take a bigger piece of a desultory market. But pending shortfalls promise a better day for those with patience, stamina and deep pockets.« less

Omid Early Intervention Resource Kit for Children with Autism Spectrum Disorders and Their Families

ERIC Educational Resources Information Center

Samadi, Sayyed Ali; Mahmoodizadeh, Ameneh

2014-01-01

Omid early intervention resource kit containing information booklets on autism spectrum disorders (ASD) and related issues, five packs of tangible selected playthings and communication facilitating aids was developed and evaluated with 65 Iranian parents. Beside a pretest before the resource kit deliverance, parents in the control group took part…

System Engineering Processes at Kennedy Space Center for Development of the SLS and Orion Launch Systems

NASA Technical Reports Server (NTRS)

Schafer, Eric J.

2012-01-01

There are over 40 subsystems being developed for the future SLS and Orion Launch Systems at Kennedy Space Center. These subsystems developed at the Kennedy Space Center Engineering Directorate follow a comprehensive design process which requires several different product deliverables during each phase of each of the subsystems. This Paper describes this process and gives an example of where the process has been applied.

Smart Grid Demonstration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Craig; Carroll, Paul; Bell, Abigail

The National Rural Electric Cooperative Association (NRECA) organized the NRECA-U.S. Department of Energy (DOE) Smart Grid Demonstration Project (DE-OE0000222) to install and study a broad range of advanced smart grid technologies in a demonstration that spanned 23 electric cooperatives in 12 states. More than 205,444 pieces of electronic equipment and more than 100,000 minor items (bracket, labels, mounting hardware, fiber optic cable, etc.) were installed to upgrade and enhance the efficiency, reliability, and resiliency of the power networks at the participating co-ops. The objective of this project was to build a path for other electric utilities, and particularly electrical cooperatives,more » to adopt emerging smart grid technology when it can improve utility operations, thus advancing the co-ops’ familiarity and comfort with such technology. Specifically, the project executed multiple subprojects employing a range of emerging smart grid technologies to test their cost-effectiveness and, where the technology demonstrated value, provided case studies that will enable other electric utilities—particularly electric cooperatives— to use these technologies. NRECA structured the project according to the following three areas: Demonstration of smart grid technology; Advancement of standards to enable the interoperability of components; and Improvement of grid cyber security. We termed these three areas Technology Deployment Study, Interoperability, and Cyber Security. Although the deployment of technology and studying the demonstration projects at coops accounted for the largest portion of the project budget by far, we see our accomplishments in each of the areas as critical to advancing the smart grid. All project deliverables have been published. Technology Deployment Study: The deliverable was a set of 11 single-topic technical reports in areas related to the listed technologies. Each of these reports has already been submitted to DOE, distributed to co-ops, and posted for universal access at www.nreca.coop/smartgrid. This research is available for widespread distribution to both cooperative members and non-members. These reports are listed in Table 1.2. Interoperability: The deliverable in this area was the advancement of the MultiSpeak™ interoperability standard from version 4.0 to version 5.0, and improvement in the MultiSpeak™ documentation to include more than 100 use cases. This deliverable substantially expanded the scope and usability of MultiSpeak, ™ the most widely deployed utility interoperability standard, now in use by more than 900 utilities. MultiSpeak™ documentation can be accessed only at www.multispeak.org. Cyber Security: NRECA’s starting point was to develop cyber security tools that incorporated succinct guidance on best practices. The deliverables were: cyber security extensions to MultiSpeak,™ which allow more security message exchanges; a Guide to Developing a Cyber Security and Risk Mitigation Plan; a Cyber Security Risk Mitigation Checklist; a Cyber Security Plan Template that co-ops can use to create their own cyber security plans; and Security Questions for Smart Grid Vendors.« less

Acceptance Testing of the Vapor Phase Catalytic Ammonia Removal Engineering Development Unit

NASA Technical Reports Server (NTRS)

Flynn, Michael; Fisher, John; Kliss, Mark; Tleimat, Maher; Quinn, Gregory; Fort, James; Nalette, Tim; Baker, Gale

2005-01-01

This paper describes the results of acceptance testing of the Vapor Phase Catalytic Ammonia Removal (VPCAR) technology. The VPCAR technology is currently being developed by NASA as a Mars transit vehicle water recycling system. NASA has recently completed a grant to develop a next generation VPCAR system. This grant was peer reviewed and funded through the Advanced Life Support (ALS) National Research Announcement (NRA). The grant funded a contract with Water Reuse Technology Inc. to construct an engineering development unit. This contract concluded with the shipment of the final deliverable to NASA on 8/31/03. The objective of the acceptance testing was to characterize the performance of this new system. This paper presents the results of mass power, and volume measurements for the delivered system. In addition, product water purity analysis for a Mars transit mission and a planetary base wastewater ersatz are provided. Acoustic noise levels, interface specifications and system reliability results are also discussed. An assessment of the readiness of the technology for human testing and recommendations for future improvements are provided.

Managing Research in a Risk World

NASA Technical Reports Server (NTRS)

Anton, W.; Havenhill, M.

2014-01-01

The Office of Chief Medical Officer (OCHMO) owns all human health and performance risks managed by the Human System Risk Board (HSRB). While the HSRB manages the risks, the Human Research Program (HRP) manages the research portion of the overall risk mitigation strategy for these risks. The HSRB manages risks according to a process that identifies and analyzes risks, plans risk mitigation and tracks and reviews the implementation of these strategies according to its decisions pertaining to the OCHMO risk posture. HRP manages risk research work using an architecture that describes evidence-based risks, gaps in our knowledge about characterizing or mitigating the risk, and the tasks needed to produce deliverables to fill the gaps and reduce the risk. A planning schedule reflecting expected research milestones is developed, and as deliverables and new evidence are generated, research progress is tracked via the Path to Risk Reduction (PRR) that reflects a risk's research plan for a design reference mission. HRP's risk research process closely interfaces with the HSRB risk management process. As research progresses, new deliverables and evidence are used by the HSRB in conjunction with other operational and non-research evidence to inform decisions pertaining to the likelihood and consequence of the risk and risk posture. Those decisions in turn guide forward work for research as it contributes to overall risk mitigation strategies. As HRP tracks its research work, it aligns its priorities by assessing the effectiveness of its contributions and maintaining specific core competencies that would be invaluable for future work for exploration missions.

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... private expense). Do not use the clause when the only deliverable items are computer software or computer software documentation (see 227.72), commercial items developed exclusively at private expense (see 227... the clause in architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013...

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... private expense). Do not use the clause when the only deliverable items are computer software or computer software documentation (see 227.72), commercial items developed exclusively at private expense (see 227... the clause in architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013...

32 CFR 22.205 - Distinguishing assistance from procurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... research and development, the appropriate use of grants and cooperative agreements therefore is almost... principal purpose is the acquisition of specific deliverable items (e.g., prototypes or other hardware) for... benefit or use of the United States Government, rather than an activity whose principal purpose is...

SafeLand guidelines for landslide monitoring and early warning systems in Europe - Design and required technology

NASA Astrophysics Data System (ADS)

Bazin, S.

2012-04-01

Landslide monitoring means the comparison of landslide characteristics like areal extent, speed of movement, surface topography and soil humidity from different periods in order to assess landslide activity. An ultimate "universal" methodology for this purpose does not exist; every technology has its own advantages and disadvantages. End-users should carefully consider each one to select the methodologies that represent the best compromise between pros and cons, and are best suited for their needs. Besides monitoring technology, there are many factors governing the choice of an Early Warning System (EWS). A people-centred EWS necessarily comprises five key elements: (1) knowledge of the risks; (2) identification, monitoring, analysis and forecasting of the hazards; (3) operational centre; (4) communication or dissemination of alerts and warnings; and (5) local capabilities to respond to the warnings received. The expression "end-to-end warning system" is also used to emphasize that EWSs need to span all steps from hazard detection through to community response. The aim of the present work is to provide guidelines for establishing the different components for landslide EWSs. One of the main deliverables of the EC-FP7 SafeLand project addresses the technical and practical issues related to monitoring and early warning for landslides, and identifies the best technologies available in the context of both hazard assessment and design of EWSs. This deliverable targets the end-users and aims to facilitate the decision process by providing guidelines. For the purpose of sharing the globally accumulated expertise, a screening study was done on 14 EWSs from 8 different countries. On these bases, the report presents a synoptic view of existing monitoring methodologies and early-warning strategies and their applicability for different landslide types, scales and risk management steps. Several comprehensive checklists and toolboxes are also included to support informed decisions. The deliverable was compiled with contributions from experts on landslides, monitoring technologies, remote sensing, and social researchers from 16 European institutions. The deliverable addresses one of the main objectives of the SafeLand project, namely to merge experience and expert judgment and create synergies on European level towards guidelines for early warning and to make these results available to end-users and local stakeholders.

Expert system verification and validation guidelines/workshop task. Deliverable no. 1: ES V/V guidelines

NASA Technical Reports Server (NTRS)

French, Scott W.

1991-01-01

The goals are to show that verifying and validating a software system is a required part of software development and has a direct impact on the software's design and structure. Workshop tasks are given in the areas of statistics, integration/system test, unit and architectural testing, and a traffic controller problem.

Educating through Sport? Examining HIV/AIDS Education and Sport-for-Development through the Perspectives of Zambian Young People

ERIC Educational Resources Information Center

Jeanes, Ruth

2013-01-01

The sport-for-development movement has grown exponentially in the last decade generating increasing academic attention. However, existing research has rarely sought the views of young people despite them being both the main target audience of initiatives and frequently the deliverers. This paper seeks to address young people's absence within…

Foothills Parkway Section 8B Final Environmental Report, Volume 3, Appendix D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blasing, T.J.; Cada, G.F.; Carer, M.

1999-07-01

In 1994, Oak Ridge National Laboratory (ORNL) was tasked by the National Park Service (NPS) to prepare an Environmental Report (ER) for Section 8B of the Foothills Parkway in the Great Smoky Mountains National Park (GSMNP). Section 8B represents 27.7 km (14.2 miles) of a total of 115 km (72 miles) of the planned Foothills Parkway and would connect the Cosby community on the east to the incorporated town of Pittman Center to the west. The major deliverables for the project are listed. From August 1995 through October 1996, NPS, GSMNP, and ORNL staff interacted with Federal Highway Administration staffmore » to develop a conceptual design plan for Section 8B with the intent of protecting critical resources identified during the ER process to the extent possible. In addition, ORNL arranged for bioengineering experts to discuss techniques that might be employed on Section 8B with NPS, GSMNP, and ORNL staff during September 1996. For the purposes of this ER, there are two basic alternatives under consideration: (1) a build alternative and (2) a no-build alternative. Within the build alternative are a number of options including constructing Section 8B with no interchanges, constructing Section 8B with an interchange at SR416 or U.S. 321, constructing Section 8B with a spur road on Webb Mountain, and considering operation of Section 8B both before and after the operation of Section 8C. The no-build alternative is considered the no-action alternative and is not to construct Section 8B. This volume of the ER inventories the fishes and benthic macroinvertebrates inhabiting the aquatic ecosystems potentially affected by the proposed construction of Section 8B. Stream biological surveys were completed at 31 stream sites during the Fall of 1994. The sampling strategy for both invertebrates and fish was to survey the different taxa from all available habitats. For benthic invertebrates, a standardized qualitative manual collection technique was employed for all 31 stations. For fish, all streams of sufficient water were sampled using various methods of electroshocking. Two listed species were identified during the surveys: the Allegheny snaketail dragonfly (formerly a C2 federal candidate species found at six of the stream survey sites) and the tangerine darter (a Tennessee state special concern species found at two of the stream survey sites).« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael Ebert

This is the final report for the DOE-NETL grant entitled 'Creating New Incentives for Risk Identification & Insurance Processes for the Electric Utility Industry' and later, 'Energy & Risk Transfer Assessment'. It reflects work done on projects from 15 August 2004 to 29 February 2008. Projects were on a variety of topics, including commercial insurance for electrical utilities, the Electrical Reliability Organization, cost recovery by Gulf State electrical utilities after major hurricanes, and review of state energy emergency plans. This Final Technical Report documents and summarizes all work performed during the award period, which in this case is from 15more » August 2004 (date of notification of original award) through 29 February 2008. This report presents this information in a comprehensive, integrated fashion that clearly shows a logical and synergistic research trajectory, and is augmented with findings and conclusions drawn from the research as a whole. Four major research projects were undertaken and completed during the 42 month period of activities conducted and funded by the award; these are: (1) Creating New Incentives for Risk Identification and Insurance Process for the Electric Utility Industry (also referred to as the 'commercial insurance' research). Three major deliverables were produced: a pre-conference white paper, a two-day facilitated stakeholders workshop conducted at George Mason University, and a post-workshop report with findings and recommendations. All deliverables from this work are published on the CIP website at http://cipp.gmu.edu/projects/DoE-NETL-2005.php. (2) The New Electric Reliability Organization (ERO): an examination of critical issues associated with governance, standards development and implementation, and jurisdiction (also referred to as the 'ERO study'). Four major deliverables were produced: a series of preliminary memoranda for the staff of the Office of Electricity Delivery and Energy Reliability ('OE'), an ERO interview protocol and stakeholder/experts interviews, a formal research paper, and a data quality and availability study of North American Electric Reliability Corporation/ERO's disturbances and outages working group ('DAWG') databases. (3) Critical Electric Power Infrastructure Recovery and Reconstruction: Issues & New Policy Initiatives in Four Gulf Coast States After 2005's Catastrophic Hurricanes (also referred to as the 'Gulf Coast cost recovery study'). Four deliverables were produced: the original research paper providing preliminary findings and recommendations (29 September 2006), a formal presentation of that report to officials, staff and invited guests at OE's Washington, DC headquarters, a series of update memoranda and quarterly activity updates (1 November 2006 through Q3-2007), and a final cumulative update of the original research report (February 2008). Documentation and information on these research activities can be found on the CIP website at http://cipp.gmu.edu/projects/DoE-NETL-2006.php. (4) Evaluation of State Energy Emergency Response Plans (also referred to as the 'SEERP project'). Two major deliverables were produced: an evaluation of 47 SEERPs with findings, statistical analyses, geospatial renderings (mappings of the States whose plans were evaluated with statistical analysis underpinnings) and recommendations (17 September 2007), and a major revision to the original deliverable to include one additional plan (Missouri), with fully updated findings, statistical analyses, geospatial renderings, and recommendations (Revision 1, 29 February 2008).« less

An evaluation of the emerging interventions against Respiratory Syncytial Virus (RSV)-associated acute lower respiratory infections in children.

PubMed

Nair, Harish; Verma, Vasundhara R; Theodoratou, Evropi; Zgaga, Lina; Huda, Tanvir; Simões, Eric A F; Wright, Peter F; Rudan, Igor; Campbell, Harry

2011-04-13

Respiratory Syncytial Virus (RSV) is the leading cause of acute lower respiratory infections (ALRI) in children. It is estimated to cause approximately 33.8 million new episodes of ALRI in children annually, 96% of these occurring in developing countries. It is also estimated to result in about 53,000 to 199,000 deaths annually in young children. Currently there are several vaccine and immunoprophylaxis candidates against RSV in the developmental phase targeting active and passive immunization. We used a modified CHNRI methodology for setting priorities in health research investments. This was done in two stages. In Stage I, we systematically reviewed the literature related to emerging vaccines against RSV relevant to 12 criteria of interest. In Stage II, we conducted an expert opinion exercise by inviting 20 experts (leading basic scientists, international public health researchers, international policy makers and representatives of pharmaceutical companies). The policy makers and industry representatives accepted our invitation on the condition of anonymity, due to the sensitive nature of their involvement in such exercises. They answered questions from the CHNRI framework and their "collective optimism" towards each criterion was documented on a scale from 0 to 100%. In the case of candidate vaccines for active immunization of infants against RSV, the experts expressed very low levels of optimism for low product cost, affordability and low cost of development; moderate levels of optimism regarding the criteria of answerability, likelihood of efficacy, deliverability, sustainability and acceptance to end users for the interventions; and high levels of optimism regarding impact on equity and acceptance to health workers. While considering the candidate vaccines targeting pregnant women, the panel expressed low levels of optimism for low product cost, affordability, answerability and low development cost; moderate levels of optimism for likelihood of efficacy, deliverability, sustainability and impact on equity; high levels of optimism regarding acceptance to end users and health workers. The group also evaluated immunoprophylaxis against RSV using monoclonal antibodies and expressed no optimism towards low product cost; very low levels of optimism regarding deliverability, affordability, sustainability, low implementation cost and impact on equity; moderate levels of optimism against the criteria of answerability, likelihood of efficacy, acceptance to end-users and health workers; and high levels of optimism regarding low development cost. They felt that either of these vaccines would have a high impact on reducing burden of childhood ALRI due to RSV and reduce the overall childhood ALRI burden by a maximum of about 10%. Although monoclonal antibodies have proven to be effective in providing protection to high-risk infants, their introduction in resource poor settings might be limited by high cost associated with them. Candidate vaccines for active immunization of infants against RSV hold greatest promise. Introduction of a low cost vaccine against RSV would reduce the inequitable distribution of burden due to childhood ALRI and will most likely have a high impact on morbidity and mortality due to severe ALRI.

Big Sky Carbon Sequestration Partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

Susan M. Capalbo

2005-11-01

The Big Sky Carbon Sequestration Partnership, led by Montana State University, is comprised of research institutions, public entities and private sectors organizations, and the Confederated Salish and Kootenai Tribes and the Nez Perce Tribe. Efforts under this Partnership in Phase I fall into four areas: evaluation of sources and carbon sequestration sinks that will be used to determine the location of pilot demonstrations in Phase II; development of GIS-based reporting framework that links with national networks; designing an integrated suite of monitoring, measuring, and verification technologies and assessment frameworks; and initiating a comprehensive education and outreach program. The groundwork ismore » in place to provide an assessment of storage capabilities for CO2 utilizing the resources found in the Partnership region (both geological and terrestrial sinks), that would complement the ongoing DOE research agenda in Carbon Sequestration. The region has a diverse array of geological formations that could provide storage options for carbon in one or more of its three states. Likewise, initial estimates of terrestrial sinks indicate a vast potential for increasing and maintaining soil C on forested, agricultural, and reclaimed lands. Both options include the potential for offsetting economic benefits to industry and society. Steps have been taken to assure that the GIS-based framework is consistent among types of sinks within the Big Sky Partnership area and with the efforts of other DOE regional partnerships. The Partnership recognizes the critical importance of measurement, monitoring, and verification technologies to support not only carbon trading but all policies and programs that DOE and other agencies may want to pursue in support of GHG mitigation. The efforts in developing and implementing MMV technologies for geological sequestration reflect this concern. Research is also underway to identify and validate best management practices for soil C in the Partnership region, and to design a risk/cost effectiveness framework to make comparative assessments of each viable sink, taking into account economic costs, offsetting benefits, scale of sequestration opportunities, spatial and time dimensions, environmental risks, and long-term viability. Scientifically sound MMV is critical for public acceptance of these technologies. Deliverables for the 7th Quarter reporting period include (1) for the geological efforts: Reports on Technology Needs and Action Plan on the Evaluation of Geological Sinks and Pilot Project Deployment (Deliverables 2 and 3), and Report on the Feasibility of Mineralization Trapping in the Snake River Plain Basin (Deliverable 14); (2) for the terrestrial efforts: Report on the Evaluation of Terrestrial Sinks and a Report of the Best Production Practices for Soil C Sequestration (Deliverables 8 and 15). In addition, the 7th Quarter activities for the Partnership included further development of the proposed activities for the deployment and demonstration phase of the carbon sequestration pilots including geological and terrestrial pilots, expansion of the Partnership to encompass regions and institutions that are complimentary to the steps we have identified, building greater collaborations with industry and stakeholders in the region, contributed to outreach efforts that spanned all partnerships, co-authorship on the Carbon Capture and Separation report, and developed a regional basis to address future energy opportunities in the region. The deliverables and activities are discussed in the following sections and appended to this report. The education and outreach efforts have resulted in a comprehensive plan which serves as a guide for implementing the outreach activities under Phase I. The public website has been expanded and integrated with the GIS carbon atlas. We have made presentations to stakeholders and policy makers including two tribal sequestration workshops, and made connections to other federal and state agencies concerned with GHG emissions, climate change, and efficient and environmentally-friendly energy production. In addition, the Partnership has plans for integration of our outreach efforts with students, especially at the tribal colleges and at the universities involved in our Partnership. This includes collaboration with MSU and with the U.S.-Norway Summer School, extended outreach efforts at LANL and INEEL, and with the student section of the ASME. Finally, the Big Sky Partnership was involved in key meetings and symposium in the 7th quarter including the USDOE Wye Institute Conference on Carbon Sequestration and Capture (April, 2005); the DOE/NETL Fourth Annual Conference on Carbon Capture and Sequestration (May 2005); Coal Power Development Conference (Denver, June 2005) and meetings with our Phase II industry partners and Governor's staff.« less

The milk delivery chain and presence of Brucella spp. antibodies in bulk milk in Uganda.

PubMed

Rock, Kim Toeroek; Mugizi, Denis Rwabiita; Ståhl, Karl; Magnusson, Ulf; Boqvist, Sofia

2016-06-01

This study examined the influence of informal milk delivery chains on the risk of human exposure to Brucella spp. through milk consumption in two regions of Uganda (Gulu and Soroti Districts). The work involved describing milk delivery chains, investigating brucellosis awareness amongst milk deliverers and determining the presence of Brucella spp. antibodies in cattle milk on delivery to primary collection points (boiling points and dairies). Milk samples (n = 331) were collected from deliverers at primary collection points and from street vendors at point of sale and analysed using indirect enzyme-linked immunosorbent assay (I-ELISA). A written questionnaire was used to collect data from deliverers (n = 279) on their milk delivery chains and their brucellosis awareness. The most common delivery points in Gulu District were small dairies and in Soroti District boiling points. The presence of Brucella spp. antibodies in milk samples was higher in Soroti (40 %) than in Gulu (11 %) (P < 0.0001). There are possible public health risk consequences of this finding as 42 % of deliverers in Soroti District reported drinking raw milk, compared with 15 % in Gulu District (P < 0.0001). Awareness of brucellosis was low, with 70 % of all milk deliverers reporting not having heard of the disease or the bacterium. Application of quality controls for milk (colour and odour) along the delivery chain varied depending upon supply and demand. This study provides evidence of the diversity of informal milk markets in low-income countries and of the potential public health risks of consuming unpasteurised milk. These results can be useful to those planning interventions to reduce brucellosis.

Development, testing, and certification of the Northrup, Inc., ML series concentrating solar collector model NSC-01-0732

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

A summary is presented of the additional development work on the existing ML Series concentrating solar collector for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the development hardware, lists deliverable end items, deals with problems encountered during fabrication and testing, and includes certification statements of performance. This report shows that the products developed are marketable and suitable for public use.

Integrated Advanced Sounding Unit-A (AMSU-A). Configuration Management Plan

NASA Technical Reports Server (NTRS)

Cavanaugh, J.

1996-01-01

The purpose of this plan is to identify the baseline to be established during the development life cycle of the integrated AMSU-A, and define the methods and procedures which Aerojet will follow in the implementation of configuration control for each established baseline. Also this plan establishes the Configuration Management process to be used for the deliverable hardware, software, and firmware of the Integrated AMSU-A during development, design, fabrication, test, and delivery.

System Engineering Processes at Kennedy Space Center for Development of SLS and Orion Launch Systems

NASA Technical Reports Server (NTRS)

Schafer, Eric; Stambolian, Damon; Henderson, Gena

2013-01-01

There are over 40 subsystems being developed for the future SLS and Orion Launch Systems at Kennedy Space Center. These subsystems are developed at the Kennedy Space Center Engineering Directorate. The Engineering Directorate at Kennedy Space Center follows a comprehensive design process which requires several different product deliverables during each phase of each of the subsystems. This Presentation describes this process with examples of where the process has been applied.

Countrywide digital elevation models for the Islamic Republic of Mauritania—SRTM and ASTER (phase V, deliverable 65): Chapter F in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Lee, Gregory K.

2015-01-01

A digital elevation model (DEM) of the entire country of the Islamic Republic of Mauritania was produced using Shuttle Radar Topography Mission (SRTM) data as required for deliverable 65 of the contract. In addition, because of significant recent advancements of availability, seamlessness, and validity of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) global elevation data, the U.S. Geological Survey (USGS) extended its efforts to include a higher resolution countrywide ASTER DEM as value added to the required Deliverable 63, which was limited to five areas within the country. Both SRTM and ASTER countrywide DEMs have been provided in ERDAS Imagine (.img) format that is also directly compatible with ESRI ArcMap, ArcGIS Explorer, and other GIS applications.

Phase 2 design study of the electronic assembly for the HRUV spectrometer/polarimeter intended for the solar maximum mission. Implementation phase program plan, revision A

NASA Technical Reports Server (NTRS)

1977-01-01

The primary function of the implementation phase is to convert the ERA design of the design study phase into deliverable flight hardware. The development aspects of the experiment logic unit, the dual power converter, the junction box and the cables are considered.

Classroom Thoughtfulness and Students' Higher Order Thinking: Common Indicators and Diverse Social Studies Courses. Final Deliverable.

ERIC Educational Resources Information Center

Newmann, Fred M.

This project developed a conceptualization of higher order thinking, dimensions of classroom thoughtfulness, and an assessment exercise applicable to diverse topics taught in more than 70 classes in 11 high schools. Generic qualities of classroom thoughtfulness were not generally associated with the persuasiveness of student writing on a…

Exploiting Synthetic Lethal Relationships: Chemical Inhibition of Recombinational Repair as a Strategy to Selectively Target Tumor Cells

DTIC Science & Technology

2010-03-01

on track to achieve this goal. Task 3 (Months 3-6): Development of malachite green ATPase assay for RAD51/RAD54 Deliverable: HTS assay for...RAD51/RAD54 Dr. Kirk Ehmsen, the postdoctoral fellow working on this project, has succeeded to develop and optimize the malachite green ATPase...up to 20 minutes reaction time, at which point the malachite green reagent is added to stop the reaction and begin color development as a function

A Survey On Management Of Software Engineering In Japan

NASA Astrophysics Data System (ADS)

Kadono, Yasuo; Tsubaki, Hiroe; Tsuruho, Seishiro

2008-05-01

The purpose of this study is to clarity the mechanism of how software engineering capabilities relate to the business performance of IT vendors in Japan. To do this, we developed a structural model using factors related to software engineering, business performance and competitive environment. By analyzing the data collected from 78 major IT vendors in Japan, we found that superior deliverables and business performance were correlated with the effort expended particularly on human resource development, quality assurance, research and development and process improvement.

Integrating software architectures for distributed simulations and simulation analysis communities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldsby, Michael E.; Fellig, Daniel; Linebarger, John Michael

2005-10-01

The one-year Software Architecture LDRD (No.79819) was a cross-site effort between Sandia California and Sandia New Mexico. The purpose of this research was to further develop and demonstrate integrating software architecture frameworks for distributed simulation and distributed collaboration in the homeland security domain. The integrated frameworks were initially developed through the Weapons of Mass Destruction Decision Analysis Center (WMD-DAC), sited at SNL/CA, and the National Infrastructure Simulation & Analysis Center (NISAC), sited at SNL/NM. The primary deliverable was a demonstration of both a federation of distributed simulations and a federation of distributed collaborative simulation analysis communities in the context ofmore » the same integrated scenario, which was the release of smallpox in San Diego, California. To our knowledge this was the first time such a combination of federations under a single scenario has ever been demonstrated. A secondary deliverable was the creation of the standalone GroupMeld{trademark} collaboration client, which uses the GroupMeld{trademark} synchronous collaboration framework. In addition, a small pilot experiment that used both integrating frameworks allowed a greater range of crisis management options to be performed and evaluated than would have been possible without the use of the frameworks.« less

Development of a Dynamic Time Sharing Scheduled Environment Final Report CRADA No. TC-824-94E

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jette, M.; Caliga, D.

Massively parallel computers, such as the Cray T3D, have historically supported resource sharing solely with space sharing. In that method, multiple problems are solved by executing them on distinct processors. This project developed a dynamic time- and space-sharing scheduler to achieve greater interactivity and throughput than could be achieved with space-sharing alone. CRI and LLNL worked together on the design, testing, and review aspects of this project. There were separate software deliverables. CFU implemented a general purpose scheduling system as per the design specifications. LLNL ported the local gang scheduler software to the LLNL Cray T3D. In this approach, processorsmore » are allocated simultaneously to aU components of a parallel program (in a “gang”). Program execution is preempted as needed to provide for interactivity. Programs are also reIocated to different processors as needed to efficiently pack the computer’s torus of processors. In phase one, CRI developed an interface specification after discussions with LLNL for systemlevel software supporting a time- and space-sharing environment on the LLNL T3D. The two parties also discussed interface specifications for external control tools (such as scheduling policy tools, system administration tools) and applications programs. CRI assumed responsibility for the writing and implementation of all the necessary system software in this phase. In phase two, CRI implemented job-rolling on the Cray T3D, a mechanism for preempting a program, saving its state to disk, and later restoring its state to memory for continued execution. LLNL ported its gang scheduler to the LLNL T3D utilizing the CRI interface implemented in phases one and two. During phase three, the functionality and effectiveness of the LLNL gang scheduler was assessed to provide input to CRI time- and space-sharing, efforts. CRI will utilize this information in the development of general schedulers suitable for other sites and future architectures.« less

Deliverable 2.4.4 -- Evaluation and single-well models for the demonstration wells, Class 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deo, Milind; Morgan Craig D.

2000-07-12

Two single-well models were developed for Michelle Ute and Malnar Pike wells. The perforated intervals span thousands of feet in both the wells. Geological properties were calculated for all the perforated beds. The information was used to develop models for these two wells. These were comprehensive models since they took into account all the perforated beds.

Initial Experience and Feasibility of the New Low-Profile Stingray Catheter as Part of the Antegrade Dissection and Re-Entry Revascularization Strategy for Coronary Chronic Total Occlusions.

PubMed

Maeremans, Joren; Palmers, Pieter-Jan; Dens, Joseph

2017-01-31

BACKGROUND During antegrade dissection re-entry (ADR) of chronic total occlusions (CTO), the first-generation Stingray catheter requires the use of large-bore guides (sheathless 7.5 Fr or 8 Fr), which increases the risk for access site-related complications and compromises radial approaches. Smaller guiding sizes necessitate long guidewires (e.g., 300 cm) or guidewire extensions for catheter advancement or removal. However, friction between guides and the Stingray catheter can result in unstable guidewire position or unintentional removal. Furthermore, failure to deliver the catheter at the distal re-entry zone is a common problem. To overcome issues of deliverability and reduce the need for pre-dilatations, with its inherent risk of creating subintimal hematomas, the Stingray low-profile (LP) balloon catheter was developed. CASE REPORT We describe 3 cases of successful application of the novel Stingray LP catheter during ADR. In all cases, 7 Fr guiding catheters were successfully used in combination with the device. The lower profile facilitated a good exchange and delivery of the device, without the need for balloon pre-dilatations in 2 cases. This resulted in a limited subintimal plane, enabling a smooth puncture into the true lumen. One case presented with extreme levels of calcification and tortuosity, resulting in a high degree of friction, despite the lower catheter profile. No in-hospital coronary or access site-related complications occurred. CONCLUSIONS This case report illustrates the feasibility of the Stingray LP catheter for the treatment of CTOs via the ADR technique. The lower profile of the catheter potentially increases the deliverability, safety, and exchangeability of the device.

Summary of FY 17 Assessments Sandia National Laboratories: Evaluation of FY16 SNL FCT M2 Milestone Deliverables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John

This report is the milestone deliverable M4FT-17SN111102091 “Summary of Assessments Performed FY17 by SNL QA POC” for work package FT-17SN11110209 titled “Quality Assurance – SNL”. This report summarizes the FY17 assessment performed on Fuel Cycle Technologies / Spent Fuel and Waste Disposition efforts.

Development, testing, and certification of Owens-Illinois model SEC-601 solar energy collector system

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

The final results are presented of the additional development work on the existing air-cooled solar energy collector subsystem for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the deliverable end items, lists program objectives, relates how they were accomplished, deals with problems encountered during fabrication and testing, and includes a certification statement of performance. The report shows that the products developed are marketable and suitable for public use.

Hawaii Energy Sustainable Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rocheleau, Richard; Turn, Scott; Griffin, James

The objective of HESP was to support the development and deployment of distributed energy resource (DER) technologies to facilitate increased penetration of renewable energy resources and reduced use of fossil fuels in Hawaii’s power grids. All deliverables, publications and other public releases have been submitted to the DOE in accordance with the award and subsequent award modifications.

1996--1997 TEMA/DOE oversight annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-06-01

The Tennessee Emergency Management Agency (TEMA) has entered into a five-year agreement with the Department of Energy (DOE) to provide emergency response activities associated with the Oak Ridge Reservation (ORR). The Agreement in Principle (AIP) delineates the duties and responsibilities of the parties. The agreement tasked TEMA with the following responsibilities: develop offsite emergency plans; conduct emergency management training; develop offsite emergency organizations; develop emergency communications; develop emergency facilities; conduct exercises and drills; provide detection and protection equipment; and develop an emergency staff. This report describes progress on the 14 deliverables connected with this contract.

Research, development and demonstration of lead-acid batteries for electric vehicle propulsion

NASA Astrophysics Data System (ADS)

Bowman, D. E.

1983-08-01

Research programs on lead-acid batteries are reported that cover active materials utilization, active material integrity, and some technical support projects. Processing problems were encountered and corrected. Components and materials, a lead-plastic composite grid, cell designs, and deliverables are described. Cell testing is discussed, as well as battery subsystems, including fuel gage, thermal management, and electrolyte circulation.

Software Cost Estimating,

DTIC Science & Technology

1982-05-13

Size Of The Software. A favourite measure for software system size is linos of operational code, or deliverable code (operational code plus...regression models, these conversions are either derived from productivity measures using the "cost per instruction" type of equation or they are...appropriate to different development organisattons, differert project types, different sets of units for measuring e and s, and different items

An Introduction to the Development of a Product Brand: An Evidence-Based Template for Use with First Year Undergraduate Industrial Designers

ERIC Educational Resources Information Center

Torrens, George Edward; Badni, Kevin; Hurn, Karl; Storer, Ian James

2015-01-01

The manipulation of colour, form and texture within a commercial design activity is a core competency for an industrial designer. The job of the Industrial designer is to use colour, form, texture, temperature and movement to deliver a sensory experience that evokes a desired response. The core deliverables of an industrial designer are embedded…

IMPGSS - International Medical Program Global Satellite System

DTIC Science & Technology

2004-02-01

additional comments regarding the significance of working with Tachyon and NASK under this Contract). 5.2.5 Requirements - Country/Region Assessments...services on a tentative exploratory basis by Tachyon ]. 5.2.7 Program Development Deliverable A 007 This is currently summarized in the Program Content...based satellite transmissions and transmission pricing based on segmented, limited use data volumes via Tachyon . " A more involved use of evaluation

Water Processor and Oxygen Generation Assembly

NASA Technical Reports Server (NTRS)

Bedard, John

1997-01-01

This report documents the results of the tasks which initiated efforts on design issues relating to the Water Processor (WP) and the Oxygen Generation Assembly (OGA) Flight Hardware for the International Space Station. This report fulfills the Statement of Work deliverables requirement for contract H-29387D. The following lists the tasks required by contract H-29387D: (1) HSSSI shall coordinate a detailed review of WP/OGA Flight Hardware program requirements with personnel from MSFC to identify requirements that can be eliminated without affecting the technical integrity of the WP/OGA Hardware; (2) HSSSI shall conduct the technical interchanges with personnel from MSFC to resolve design issues related to WP/OGA Flight Hardware; (3) HSSSI will initiate discussions with Zellwegger Analytics, Inc. to address design issues related to WP and PCWQM interfaces.

Research into the Specific Aspects of Internal Conflict Displays in the Course of Professional Identification

ERIC Educational Resources Information Center

Rensh, Marina A.; Kosyakova, Inessa V.; Agafonova, Anna N.

2016-01-01

The applicability of the researched issue is preconditioned by the need for detecting key determinants which define the process of the person's professional development, identification with the professional environment, and sources of professional self-efficacy. The purpose of the article is to provide the deliverables of the empiric research for…

Traffic Aware Strategic Aircrew Requests (TASAR) Analysis and Development

NASA Technical Reports Server (NTRS)

Woods, Sharon E.

2016-01-01

This document is the final report and deliverable 30 of Contract No. NNL12AA06C, the Traffic Aware Strategic Aircrew Requests (TASAR) contract awarded via the NASA Research Announcement (NRA). It documents the accomplishments of the contract, the evolution of its role in the overall TASAR project, and lessons learned from its execution.

Potential for reduced toxicity and dose escalation in the treatment of inoperable non-small-cell lung cancer: a comparison of intensity-modulated radiation therapy (IMRT), 3D conformal radiation, and elective nodal irradiation.

PubMed

Grills, Inga S; Yan, Di; Martinez, Alvaro A; Vicini, Frank A; Wong, John W; Kestin, Larry L

2003-11-01

To systematically evaluate four different techniques of radiation therapy (RT) used to treat non-small-cell lung cancer and to determine their efficacy in meeting multiple normal-tissue constraints while maximizing tumor coverage and achieving dose escalation. Treatment planning was performed for 18 patients with Stage I to IIIB inoperable non-small-cell lung cancer using four different RT techniques to treat the primary lung tumor +/- the hilar/mediastinal lymph nodes: (1) Intensity-modulated radiation therapy (IMRT), (2) Optimized three-dimensional conformal RT (3D-CRT) using multiple beam angles, (3) Limited 3D-CRT using only 2 to 3 beams, and (4) Traditional RT using elective nodal irradiation (ENI) to treat the mediastinum. All patients underwent virtual simulation, including a CT scan and (18)fluorodeoxyglucose positron emission tomography scan, fused to the CT to create a composite tumor volume. For IMRT and 3D-CRT, the target included the primary tumor and regional nodes either > or =1.0 cm in short-axis dimension on CT or with increased uptake on PET. For ENI, the target included the primary tumor plus the ipsilateral hilum and mediastinum from the inferior head of the clavicle to at least 5.0 cm below the carina. The goal was to deliver 70 Gy to > or =99% of the planning target volume (PTV) in 35 daily fractions (46 Gy to electively treated mediastinum) while meeting multiple normal-tissue dose constraints. Heterogeneity correction was applied to all dose calculations (maximum allowable heterogeneity within PTV 30%). Pulmonary and esophageal constraints were as follows: lung V(20) < or =25%, mean lung dose < or =15 Gy, esophagus V(50) < or =25%, mean esophageal dose < or =25 Gy. At the completion of all planning, the four techniques were contrasted for their ability to achieve the set dose constraints and deliver tumoricidal RT doses. Requiring a minimum dose of 70 Gy within the PTV, we found that IMRT was associated with a greater degree of heterogeneity within the target and, correspondingly, higher mean doses and tumor control probabilities (TCPs), 7%-8% greater than 3D-CRT and 14%-16% greater than ENI. Comparing the treatment techniques in this manner, we found only minor differences between 3D-CRT and IMRT, but clearly greater risks of pulmonary and esophageal toxicity with ENI. The mean lung V(20) was 36% with ENI vs. 23%-25% with the three other techniques, whereas the average mean lung dose was approximately 21.5 Gy (ENI) vs. 15.5 Gy (others). Similarly, the mean esophagus V(50) was doubled with ENI, to 34% rather than 15%-18%. To account for differences in heterogeneity, we also compared the techniques giving each plan a tumor control probability equivalent to that of the optimized 3D-CRT plan delivering 70 Gy. Using this method, IMRT and 3D-CRT offered similar results in node-negative cases (mean lung and esophageal normal-tissue complication probability [NTCP] of approximately 10% and 2%-7%, respectively), but ENI was distinctly worse (mean NTCPs of 29% and 20%). In node-positive cases, however, IMRT reduced the lung V(20) and mean dose by approximately 15% and lung NTCP by 30%, compared to 3D-CRT. Compared to ENI, the reductions were 50% and >100%. Again, for node-positive cases, especially where the gross tumor volume was close to the esophagus, IMRT reduced the mean esophagus V(50) by 40% (vs. 3D-CRT) to 145% (vs. ENI). The esophageal NTCP was at least doubled converting from IMRT to 3D-CRT and tripled converting from IMRT to ENI. Finally, the total number of fractions for each plan was increased or decreased until all outlined normal-tissue constraints were reached/satisfied. While meeting all constraints, IMRT or 3D-CRT increased the deliverable dose in node-negative patients by >200% over ENI. In node-positive patients, IMRT increased the deliverable dose 25%-30% over 3D-CRT and 130%-140% over ENI. The use of 3D-CRT without IMRT increased the deliverable RT dose >80% over ENI. Using a limited number of 3D-CRT beams decreased the lung V(20), mean dose, and NTCP in node-positive patients. The use of 3D-CRT, particul mean dose, and NTCP in node-positive patients. The use of 3D-CRT, particularly with only 3 to 4 beam angles, has the ability to reduce normal-tissue toxicity, but has limited potential for dose escalation beyond the current standard in node-positive patients. IMRT is of limited additional value (compared to 3D-CRT) in node-negative cases, but is beneficial in node-positive cases and in cases with target volumes close to the esophagus. When meeting all normal-tissue constraints in node-positive patients, IMRT can deliver RT doses 25%-30% greater than 3D-CRT and 130%-140% greater than ENI. Whereas the possibility of dose escalation is severely limited with ENI, the potential for pulmonary and esophageal toxicity is clearly increased.

Diabetes Care and Treatment Project: A Diabetes Institute of the Walter Reed Health Care System and Joslin Telemedicine Initiative

DTIC Science & Technology

2009-04-09

detecting proliferative diabetic retinopathy . Telemedicine and e-Health. 2005;11: 641-651. MILESTONES AND DELIVERABLES: Completion of data...telemedicine system for comprehensive diabetes management and assessment of diabetic retinopathy that provides increased access for diabetic patients to...CDMP developed under this collaborative effort. 15. SUBJECT TERMS Joslin Vision Network, telemedicine, diabetes mellitus, diabetic retinopathy

Shuttle orbiter Ku-band radar/communications system design evaluation. Deliverable test equipment evaluation

NASA Technical Reports Server (NTRS)

Maronde, R. G.

1980-01-01

The Ku-band test equipment, known as the Deliverable System Test equipment (DSTE), is reviewed and evaluated. The DSTE is semiautomated and computer programs were generated for 14 communication mode tests and 17 radar mode tests. The 31 test modules provide a good cross section of tests with which to exercise the Ku-band system; however, it is very limited when being used to verify Ku-band system performance. More detailed test descriptions are needed, and a major area of concern is the DSTE sell-off procedure which is inadequate.

Overview of 3D Documentation Data and Tools available for Archaeological Researches: case study of the Romanesque Church of Dugny-sur-Meuse (France)

NASA Astrophysics Data System (ADS)

Macher, H.; Grussenmeyer, P.; Kraemer, C.; Guillemin, S.

2015-08-01

In this paper, the 3D documentation of the full structure of the Romanesque church of Dugny-sur-Meuse is discussed. In 2012 and 2013, a 3D recording project was carried out under the supervision of the Photogrammetry and Geomatics Research Group from INSA Strasbourg (France) in cooperation with C. Kraemer, archaeologist from Nancy (France). The goal of the project was on one hand to propose new solutions and tools to the archaeologists in charge of the project especially for stone by stone measurements. On the other hand, a simplified 3D model was required by the local authorities for communication purposes. To achieve these goals several techniques were applied namely GNSS measurements and accurate traverse networks, photogrammetric recordings and terrestrial laser scanning acquisitions. The various acquired data are presented in this paper. Based on these data, several deliverables are also proposed. The generation of orthoimages from plane as well as cylindrical surfaces is considered. Moreover, the workflow for the creation of a 3D simplified model is also presented.

A survey of music therapists' work with speech-language pathologists and experiences with augmentative and alternative communication.

PubMed

McCarthy, John; Geist, Kamile; Zojwala, Rashida; Schock, Molly Z

2008-01-01

Although music therapists may work with a variety of professionals in interdisciplinary teams, there is a lack of information about the specific nature of their work with speech-language pathologists (SLPs). Using an Internet-based tool, Board Certified Music Therapists (n = 1834, 1675 deliverable) were surveyed regarding their work with speech-language pathologists and experiences with augmentative and alternative communication (AAC). Specifically, participants were asked about: (a) demographics; (b) populations worked with professionally; (c) past and present work with speech-language pathologists; (d) goals addressed; (e) benefits and challenges encountered; and (f) work with AAC. Responses (N = 847) indicated the majority of participants (73.6%) had worked with SLPs at some point in various roles and in various settings. Fewer participants reported currently working with SLPs (42.8%), although 50.1% reported currently working with someone requiring some form of AAC. Participants reported a mean level of expertise with AAC of 3.9 on a scale of 1-7. Sharing knowledge was noted as a top benefit of working with SLPs, while scheduling was reported as the most frequent challenge. Other benefits and challenges as well as future research directions are discussed.

Deliberately Designed Atomic-Level Silver-Containing Interface Results in Improved Rate Capability and Utilization of Silver Hollandite for Lithium-Ion Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Paul F.; Brady, Alexander B.; Lee, Seung-Yong

α-MnO 2-structured materials are generally classified as semiconductors, thus we present a strategy to increase electrochemical utilization through design of a conductive material interface. Surface treatment of silver hollandite (Ag xMn 8O 16) with Ag + (Ag 2O) provides significant benefit to the resultant electrochemistry, including a decreased charge transfer resistance, and a 2-fold increase in deliverable energy density at high rate. The improved function of this designed interface relative to conventional electrode fabrication strategies is further highlighted.

Deliberately Designed Atomic-Level Silver-Containing Interface Results in Improved Rate Capability and Utilization of Silver Hollandite for Lithium-Ion Storage

DOE PAGES

Smith, Paul F.; Brady, Alexander B.; Lee, Seung-Yong; ...

2017-12-11

α-MnO 2-structured materials are generally classified as semiconductors, thus we present a strategy to increase electrochemical utilization through design of a conductive material interface. Surface treatment of silver hollandite (Ag xMn 8O 16) with Ag + (Ag 2O) provides significant benefit to the resultant electrochemistry, including a decreased charge transfer resistance, and a 2-fold increase in deliverable energy density at high rate. The improved function of this designed interface relative to conventional electrode fabrication strategies is further highlighted.

Assessment of MSFCs Process for the Development and Activation of Space Act Agreement

NASA Technical Reports Server (NTRS)

Daugherty, Rachel

2014-01-01

Space Act Agreements (SAAs) are contractual agreements that NASA utilizes to form partnerships with researchers, industry, and academia to stimulate cutting-edge innovation within the science and technology communities. center dot This study assessed the current SAA development and activation process at Marshall Space Flight Center (MSFC) to determine if improvements could be implemented to increase productivity, decrease time to activation, and improve the quality of deliverables.

Thermo-hydrological and chemical (THC) modeling to support Field Test Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stauffer, Philip H.; Jordan, Amy B.; Harp, Dylan Robert

This report summarizes ongoing efforts to simulate coupled thermal-hydrological-chemical (THC) processes occurring within a hypothetical high-level waste (HLW) repository in bedded salt. The report includes work completed since the last project deliverable, “Coupled model for heat and water transport in a high level waste repository in salt”, a Level 2 milestone submitted to DOE in September 2013 (Stauffer et al., 2013). Since the last deliverable, there have been code updates to improve the integration of the salt module with the pre-existing code and development of quality assurance (QA) tests of constitutive functions and precipitation/dissolution reactions. Simulations of bench-scale experiments, bothmore » historical and currently in the planning stages have been performed. Additional simulations have also been performed on the drift-scale model that incorporate new processes, such as an evaporation function to estimate water vapor removal from the crushed salt backfill and isotopic fractionation of water isotopes. Finally, a draft of a journal paper on the importance of clay dehydration on water availability is included as Appendix I.« less

Measurement and Analysis Plan for Investigation of Spent-Fuel Assay Using Lead Slowing-Down Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Leon E.; Haas, Derek A.; Gavron, Victor A.

2009-09-25

Under funding from the Department of Energy Office of Nuclear Energy’s Materials, Protection, Accounting, and Control for Transmutation (MPACT) program (formerly the Advanced Fuel Cycle Initiative Safeguards Campaign), Pacific Northwest National Laboratory (PNNL) and Los Alamos National Laboratory (LANL) are collaborating to study the viability of lead slowing-down spectroscopy (LSDS) for spent-fuel assay. Based on the results of previous simulation studies conducted by PNNL and LANL to estimate potential LSDS performance, a more comprehensive study of LSDS viability has been defined. That study includes benchmarking measurements, development and testing of key enabling instrumentation, and continued study of time-spectra analysis methods.more » This report satisfies the requirements for a PNNL/LANL deliverable that describes the objectives, plans and contributing organizations for a comprehensive three-year study of LSDS for spent-fuel assay. This deliverable was generated largely during the LSDS workshop held on August 25-26, 2009 at Rensselaer Polytechnic Institute (RPI). The workshop itself was a prominent milestone in the FY09 MPACT project and is also described within this report.« less

A new metric for assessing IMRT modulation complexity and plan deliverability.

PubMed

McNiven, Andrea L; Sharpe, Michael B; Purdie, Thomas G

2010-02-01

To evaluate the utility of a new complexity metric, the modulation complexity score (MCS), in the treatment planning and quality assurance processes and to evaluate the relationship of the metric with deliverability. A multisite (breast, rectum, prostate, prostate bed, lung, and head and neck) and site-specific (lung) dosimetric evaluation has been completed. The MCS was calculated for each beam and the overall treatment plan. A 2D diode array (MapCHECK, Sun Nuclear, Melbourne, FL) was used to acquire measurements for each beam. The measured and planned dose (PINNACLE3, Phillips, Madison, WI) was evaluated using different percent differences and distance to agreement (DTA) criteria (3%/ 3 mm and 2%/ 1 mm) and the relationship between the dosimetric results and complexity (as measured by the MCS or simple beam parameters) assessed. For the multisite analysis (243 plans total), the mean MCS scores for each treatment site were breast (0.92), rectum (0.858), prostate (0.837), prostate bed (0.652), lung (0.631), and head and neck (0.356). The MCS allowed for compilation of treatment site-specific statistics, which is useful for comparing different techniques, as well as for comparison of individual treatment plans with the typical complexity levels. For the six plans selected for dosimetry, the average diode percent pass rate was 98.7% (minimum of 96%) for 3%/3 mm evaluation criteria. The average difference in absolute dose measurement between the planned and measured dose was 1.7 cGy. The detailed lung analysis also showed excellent agreement between the measured and planned dose, as all beams had a diode percentage pass rate for 3%/3 mm criteria of greater than 95.9%, with an average pass rate of 99.0%. The average absolute maximum dose difference for the lung plans was 0.7 cGy. There was no direct correlation between the MCS and simple beam parameters which could be used as a surrogate for complexity level (i.e., number of segments or MU). An evaluation criterion of 2%/ 1 mm reliably allowed for the identification of beams that are dosimetrically robust. In this study we defined a robust beam or plan as one that maintained a diode percentage pass rate greater than 90% at 2%/ 1 mm, indicating delivery that was deemed accurate when compared to the planned dose, even under stricter evaluation criterion. MCS and MU threshold criteria were determined by defining a required specificity of 1.0. A MCS threshold of 0.8 allowed for identification of robust deliverability with a sensitivity of 0.36. In contrast, MU had a lower sensitivity of 0.23 for a threshold of 50 MU. The MCS allows for a quantitative assessment of plan complexity, on a fixed scale, that can be applied to all treatment sites and can provide more information related to dose delivery than simple beam parameters. This could prove useful throughout the entire treatment planning and QA process.

Higher-Order Mixed Finite Element Methods for Time Domain Electromagnetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, D; Stowell, M; Koning, J

This is the final report for LDRD 01-ERD-005. The Principal Investigator was Niel Madsen of the Defense Sciences Engineering Division (DSED). Collaborators included Daniel White, Joe Koning and Nathan Champagne of DSED, Mark Stowell of Center for Applications Development and Software Engineering (CADSE), and Ph.D. students Rob Rieben and Aaron Fisher at the UC Davis Department of Applied Science. It should be noted that the students were partially supported by the LLNL Student-Employee Graduate Research Fellow program. We begin with an Introduction which provides background and motivation for this research effort. Section II contains high-level description of our Approach, andmore » Section III summarizes our key research Accomplishments. A description of the Software deliverables is provided in Section IV, and Section V includes simulation Validation and Results. It should be noted we do not get into the mathematical details in this report, rather these can be found in our publications which are listed in Section III.« less

Development of a pest risk analysis for Phytophthora ramorum for the European Union; the key deliverable from the EU-Funded project RAPRA

Treesearch

Claire Sansford; Alan Inman; Joan Webber

2010-01-01

Pest Risk Analysis (PRA) is an internationally recognized, structured process of determining whether plant pests and pathogens that are absent from a country or area could enter, establish, and cause an economic or environmental risk that is deemed unacceptable. PRA is also used to help identify phytosanitary measures to reduce risks to an acceptable level. United...

US-UK Collaboration on Fossil Energy Advanced Materials: Task 1—Steam Oxidation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, Gordon R.; Tylczak, Joseph; Carney, Casey

This presentation goes over the following from the US-UK collaboration on Fossil Energy Advanced Materials: Task 1, Steam Oxidation: US-led or co-led deliverables, Phase II products (US), 2011-present, Phase III products, Phase III Plan, an explanation of sCO 2 compared with sH 2O, an explanation of Ni-base Alloys, an explanation of 300 Series (18Cr-8Ni)/E-Brite, an explanation of the typical Microchannel HX Fabrication process, and an explanation of diffusion bonded Ni-base superalloys.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, S; Guerrero, M; Zhang, B

Purpose: To implement a comprehensive non-measurement-based verification program for patient-specific IMRT QA Methods: Based on published guidelines, a robust IMRT QA program should assess the following components: 1) accuracy of dose calculation, 2) accuracy of data transfer from the treatment planning system (TPS) to the record-and-verify (RV) system, 3) treatment plan deliverability, and 4) accuracy of plan delivery. Results: We have implemented an IMRT QA program that consist of four components: 1) an independent re-calculation of the dose distribution in the patient anatomy with a commercial secondary dose calculation program: Mobius3D (Mobius Medical Systems, Houston, TX), with dose accuracy evaluationmore » using gamma analysis, PTV mean dose, PTV coverage to 95%, and organ-at-risk mean dose; 2) an automated in-house-developed plan comparison system that compares all relevant plan parameters such as MU, MLC position, beam iso-center position, collimator, gantry, couch, field size settings, and bolus placement, etc. between the plan and the RV system; 3) use of the RV system to check the plan deliverability and further confirm using “mode-up” function on treatment console for plans receiving warning; and 4) implementation of a comprehensive weekly MLC QA, in addition to routine accelerator monthly and daily QA. Among 1200 verifications, there were 9 cases of suspicious calculations, 5 cases of delivery failure, no data transfer errors, and no failure of weekly MLC QA. These 9 suspicious cases were due to the PTV extending to the skin or to heterogeneity correction effects, which would not have been caught using phantom measurement-based QA. The delivery failure was due to the rounding variation of MLC position between the planning system and RV system. Conclusion: A very efficient, yet comprehensive, non-measurement-based patient-specific QA program has been implemented and used clinically for about 18 months with excellent results.« less

The K-8 Aeronautics Internet Testbook: Project Plan-Year 3

NASA Technical Reports Server (NTRS)

Pallis, Jani Macari

1997-01-01

The Project Plan - Year 3 includes: the major tasks and milestones, the assignment of tasks, and the key personnel assigned to each task, a description of the milestone and major task, and the deliverables for the project. Milestones have project numbers ending in "0.0", such as "25.0.0 Phase III Development". Major tasks under that milestone begin with the same first number such as, "25.0.1 Develop Future Of Aeronautics". The assignment of tasks included in the Year 3 project plan contains the names of the key personnel responsible for the task and others participating on the task. Although the PI has the overall and ultimately responsible for all the tasks and milestones, the name of the first individual on a task or milestone is the person responsible for that task. Other names listed under that task will be participating on the task. Since there are two individuals at Cislunar Aerospace, Inc. with the name "J. Pallis", the principal investigator, Jani Macari Pallis is designated as PI in the Project Plan and James Pallis is designated as J. Pallis.

Crystalline basement map of Mauritania derived from filtered aeromagnetic data (deliverable 54_1), Aeromagnetic and geological structure map of Mauritania (phase V, deliverable 54_2), Maximum depth to basement map of Mauritania derived from Euler analysis of Aeromagnetic data (phase V, deliverable 54_3), and color composite image of radioelement data (added value): Chapter B1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Finn, Carol A.; Horton, John D.

2015-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Deliverability on the interstate natural gas pipeline system

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

Deliverability on the Interstate Natural Gas Pipeline System examines the capability of the national pipeline grid to transport natural gas to various US markets. The report quantifies the capacity levels and utilization rates of major interstate pipeline companies in 1996 and the changes since 1990, as well as changes in markets and end-use consumption patterns. It also discusses the effects of proposed capacity expansions on capacity levels. The report consists of five chapters, several appendices, and a glossary. Chapter 1 discusses some of the operational and regulatory features of the US interstate pipeline system and how they affect overall systemmore » design, system utilization, and capacity expansions. Chapter 2 looks at how the exploration, development, and production of natural gas within North America is linked to the national pipeline grid. Chapter 3 examines the capability of the interstate natural gas pipeline network to link production areas to market areas, on the basis of capacity and usage levels along 10 corridors. The chapter also examines capacity expansions that have occurred since 1990 along each corridor and the potential impact of proposed new capacity. Chapter 4 discusses the last step in the transportation chain, that is, deliverability to the ultimate end user. Flow patterns into and out of each market region are discussed, as well as the movement of natural gas between States in each region. Chapter 5 examines how shippers reserve interstate pipeline capacity in the current transportation marketplace and how pipeline companies are handling the secondary market for short-term unused capacity. Four appendices provide supporting data and additional detail on the methodology used to estimate capacity. 32 figs., 15 tabs.« less

Evaluation of Micronutrient Sensors for Food Matrices in Resource-Limited Settings: A Systematic Narrative Review.

PubMed

Waller, Anna W; Lotton, Jennifer L; Gaur, Shashank; Andrade, Jeanette M; Andrade, Juan E

2018-06-21

In resource-limited settings, mass food fortification is a common strategy to ensure the population consumes appropriate quantities of essential micronutrients. Food and government organizations in these settings, however, lack tools to monitor the quality and compliance of fortified products and their efficacy to enhance nutrient status. The World Health Organization has developed general guidelines known as ASSURED (Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment-free, and Deliverable to end-users) to aid the development of useful diagnostic tools for these settings. These guidelines assume performance aspects such as sufficient accuracy, reliability, and validity. The purpose of this systematic narrative review is to examine the micronutrient sensor literature on its adherence towards the ASSURED criteria along with accuracy, reliability, and validation when developing micronutrient sensors for resource-limited settings. Keyword searches were conducted in three databases: Web of Science, PubMed, and Scopus and were based on 6-point inclusion criteria. A 16-question quality assessment tool was developed to determine the adherence towards quality and performance criteria. Of the 2,365 retrieved studies, 42 sensors were included based on inclusion/exclusion criteria. Results showed that improvements to the current sensor design are necessary, especially their affordability, user-friendliness, robustness, equipment-free, and deliverability within the ASSURED criteria, and accuracy and validity of the additional criteria to be useful in resource-limited settings. Although it requires further validation, the 16-question quality assessment tool can be used as a guide in the development of sensors for resource-limited settings. © 2018 Institute of Food Technologists®.

Training Methods to Build Human Terrain Mapping Skills

DTIC Science & Technology

2010-10-01

confidence in making friends, and talking to strangers. • Language – a few key phrases. • Language training with Arabic teacher (not computer -based...session to evaluate the lesson content and delivery method. Based on your feedback we will make changes and corrections to the content and the computer ...requirement, exemplar training materials were developed. The training materials took the form of a modular computer /web-based and web-deliverable course of

Students with Disabilities in Juvenile Justice Programs: Directions for Federal Support. Policy Forum. Proceedings Document (Alexandria, Virginia, October 26-27, 1998). Final Report, Deliverable-Task 2-3.1a.

ERIC Educational Resources Information Center

National Association of State Directors of Special Education, Alexandria, VA.

This proceedings discusses the role for federal policy in achieving the best possible short and long-term educational results for youth with disabilities in juvenile justice programs. Participants identified the 11 issues regarding students with disabilities in juvenile justice programs and developed a set of recommendations as to how the federal…

Improving Deterministic Reserve Requirements for Security Constrained Unit Commitment and Scheduling Problems in Power Systems

NASA Astrophysics Data System (ADS)

Wang, Fengyu

Traditional deterministic reserve requirements rely on ad-hoc, rule of thumb methods to determine adequate reserve in order to ensure a reliable unit commitment. Since congestion and uncertainties exist in the system, both the quantity and the location of reserves are essential to ensure system reliability and market efficiency. The modeling of operating reserves in the existing deterministic reserve requirements acquire the operating reserves on a zonal basis and do not fully capture the impact of congestion. The purpose of a reserve zone is to ensure that operating reserves are spread across the network. Operating reserves are shared inside each reserve zone, but intra-zonal congestion may block the deliverability of operating reserves within a zone. Thus, improving reserve policies such as reserve zones may improve the location and deliverability of reserve. As more non-dispatchable renewable resources are integrated into the grid, it will become increasingly difficult to predict the transfer capabilities and the network congestion. At the same time, renewable resources require operators to acquire more operating reserves. With existing deterministic reserve requirements unable to ensure optimal reserve locations, the importance of reserve location and reserve deliverability will increase. While stochastic programming can be used to determine reserve by explicitly modelling uncertainties, there are still scalability as well as pricing issues. Therefore, new methods to improve existing deterministic reserve requirements are desired. One key barrier of improving existing deterministic reserve requirements is its potential market impacts. A metric, quality of service, is proposed in this thesis to evaluate the price signal and market impacts of proposed hourly reserve zones. Three main goals of this thesis are: 1) to develop a theoretical and mathematical model to better locate reserve while maintaining the deterministic unit commitment and economic dispatch structure, especially with the consideration of renewables, 2) to develop a market settlement scheme of proposed dynamic reserve policies such that the market efficiency is improved, 3) to evaluate the market impacts and price signal of the proposed dynamic reserve policies.

Dynamic Metabolic Model Building Based on the Ensemble Modeling Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, James C.

2016-10-01

Ensemble modeling of kinetic systems addresses the challenges of kinetic model construction, with respect to parameter value selection, and still allows for the rich insights possible from kinetic models. This project aimed to show that constructing, implementing, and analyzing such models is a useful tool for the metabolic engineering toolkit, and that they can result in actionable insights from models. Key concepts are developed and deliverable publications and results are presented.

DEVELOPMENT OF A GEOCHEMICAL MODEL FOR URANIUM TRANSPORT IN THE UNSATURATED AND SATURATED SEDIMENTS AT THE 200 WEST AREA OF THE US DEPARTMENT OF ENERGY HANFORD SITE WASHINGTON (SEPTEMBER 2004)

DOE Office of Scientific and Technical Information (OSTI.GOV)

ADAMS SC; PETERSEN SW

2010-03-24

Final Deliverable under GWP-HQ-LMT-02 contract for Hanford Sci. & Tech. Gp. to BHI. The scope of work covered laboratory analyses and gephysical logging for 299-W19-43 near the 200 West U Plant. Other isotopic analyses were conducted for holes around 216-U-1&2, including U-236.

Project Summary Report

NASA Technical Reports Server (NTRS)

Upchurch, Christopher

2011-01-01

The project, being the development of resource management applications, consisted entirely of my own effort. From deliverable requirements provided by my mentor, and some functional requirement additions generated through design reviews, It was my responsibility to implement the requested features as well as possible, given the resources available. For the most part development work consisted of database programming and functional testing using real resource data. Additional projects I worked on included some firing room console training, configuring the new NE-A microcontroller development lab network, mentoring high school CubeSat students, and managing the NE interns' component of the mentor appreciation ceremony.

Exposing Underrepresented Groups to Climate Change and Atmospheric Science Through Service Learning and Community-Based Participatory Research

NASA Astrophysics Data System (ADS)

Padgett, D.

2016-12-01

Tennessee State University (TSU) is among seven partner institutions in the NASA-funded project "Mission Earth: Fusing Global Learning and Observations to Benefit the Environment (GLOBE) with NASA Assets to Build Systemic Innovation in STEM Education." The primary objective at the TSU site is to expose high school students from racial and ethnic groups traditionally underrepresented in STEM to atmospheric science and physical systems associated with climate change. Currently, undergraduate students enrolled in TSU's urban and physical courses develop lessons for high school students focused upon the analysis of global warming phenomena and related extreme weather events. The GLOBE Atmosphere Protocols are emphasized in exercises focused upon the urban heat island (UHI) phenomenon and air quality measurements. Pre-service teachers at TSU, and in-service teachers at four local high schools are being certified in the Atmosphere Protocols. Precipitation, ambient air temperature, surface temperature and other data are collected at the schools through a collaborative learning effort among the high school students, TSU undergraduates, and high school teachers. Data collected and recorded manually in the field are compared to each school's automated Weatherbug station measurements. Students and teachers engage in analysis of NASA imagery as part of the GLOBE Surface Temperature Protocol. At off-campus locations, US Clean Air Act (CAA) criteria air pollutant and Toxic Release Inventory (TRI) air pollutant sampling is being conducted in community-based participatory research (CBPR) format. Students partner with non-profit environmental organizations. Data collected using low-cost air sampling devices is being compared with readings from government air monitors. The GLOBE Aerosols Protocol is used in comparative assessments with air sampling results. Project deliverables include four new GLOBE schools, the enrollment of which is nearly entirely comprised of students underrepresented in STEM. A model for service learning activities with GLOBE to increase underrepresented groups participation in STEM is a second deliverable. A third deliverable, a comprehensive citizen science guidebook for grassroots level air quality assessment, is being developed for wide distribution.

Exploiting Synthetic Lethal Relationships: Chemical Inhibition of Recombinational Repair as a Strategy to Selectively Target Tumor Cells

DTIC Science & Technology

2011-03-01

with Dr. Arkin to address compound selectivity for human RAD54 by testing the 
 5
 lead candidate compounds identified in the HTS in malachite green...Mukherjee is on track to achieve this goal. Task 3 (Months 3-6): Development of malachite green ATPase assay for RAD51/RAD54 Deliverable: HTS...assay for RAD51/RAD54 Dr. Kirk Ehmsen successfully developed and optimized the malachite green ATPase assay (7) for human RAD54 in year 1 of the

Developments in Radiation-Hardened Electronics Applicable to the Vision for Space Exploration

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Frazier, Donald O.; Patrick , Marshall C.; Watson, Michael D.; Johnson, Michael A.; Cressler, John D.; Kolawa, Elizabeth A.

2007-01-01

The Radiation Hardened Electronics for Space Exploration (RHESE) project develops the advanced technologies required to produce radiation hardened electronics, processors, and devices in support of the anticipated requirements of NASA's Constellation program. Methods of protecting and hardening electronics against the encountered space environment are discussed. Critical stages of a spaceflight mission that are vulnerable to radiation-induced interruptions or failures are identified. Solutions to mitigating the risk of radiation events are proposed through the infusion of RHESE technology products and deliverables into the Constellation program's spacecraft designs.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2014 First Quarterly Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Sanborn, Scott E.; Simmons, Kevin L.

2014-02-19

The CRADA between PNNL, Autodesk, Toyota and Magna has been effective since October 28th, 2013. The whole team including CRADA and subcontract partners kicked off the project technically on November 1st, 2013. This report describes work performed during the first quarter of FY 2014. The following technical progresses have been made toward project milestones: 1) The project kickoff meeting was organized at PlastiComp, Inc. in Winona on November 13th, 2013 involving all the project partners. During this meeting the research plan and Gantt chart were discussed and refined. The coordination of the research activities among the partners was also discussedmore » to ensure that the deliverables and timeline will be met. 2) Autodesk delivered a research version of ASMI to PNNL for process modeling using this tool under the project. PNNL installed this research version on a PNNL computer and tested it. Currently, PNNL is using ASMI to prepare the models for PlastiComp plaques. 3) PlastiComp has compounded long carbon-fiber reinforced polypropylene and polyamide 6,6 compounds for rheological and thermal characterization tests by the Autodesk laboratories in Melbourne, Australia. 4) Initial mold flow analysis was carried out by PlastiComp to confirm that the 3D complex part selected by Toyota as a representative automotive part is moldable. 5) Toyota, Magna, PlastiComp and PNNL finalized the planning for molding the Toyota 3D complex part. 6) Purdue University worked with PNNL to update and specify the test matrix for characterization of fiber length/orientation. 7) Purdue University developed tools to automate the data collection and analysis of fiber length and orientation measurements. 8) Purdue University designed and specified equipment to replace the need for equipment using the technology established by the University of Leeds at General Motors.« less

Initial Experience and Feasibility of the New Low-Profile Stingray Catheter as Part of the Antegrade Dissection and Re-Entry Revascularization Strategy for Coronary Chronic Total Occlusions

PubMed Central

Maeremans, Joren; Palmers, Pieter-Jan; Dens, Joseph

2017-01-01

Case series Patient: Male, 77 • Male, 57 • Male, 73 Final Diagnosis: Coronary chronic total occlusion Symptoms: Angina pectoris Medication: — Clinical Procedure: Percutaneous coronary intervention of coronary chronic total occlusions Specialty: Cardiology Objective: Unusual setting of medical care Background: During antegrade dissection re-entry (ADR) of chronic total occlusions (CTO), the first-generation Stingray catheter requires the use of large-bore guides (sheathless 7.5 Fr or 8 Fr), which increases the risk for access site-related complications and compromises radial approaches. Smaller guiding sizes necessitate long guidewires (e.g., 300 cm) or guidewire extensions for catheter advancement or removal. However, friction between guides and the Stingray catheter can result in unstable guidewire position or unintentional removal. Furthermore, failure to deliver the catheter at the distal re-entry zone is a common problem. To overcome issues of deliverability and reduce the need for pre-dilatations, with its inherent risk of creating subintimal hematomas, the Stingray low-profile (LP) balloon catheter was developed. Case Report: We describe 3 cases of successful application of the novel Stingray LP catheter during ADR. In all cases, 7 Fr guiding catheters were successfully used in combination with the device. The lower profile facilitated a good exchange and delivery of the device, without the need for balloon pre-dilatations in 2 cases. This resulted in a limited subintimal plane, enabling a smooth puncture into the true lumen. One case presented with extreme levels of calcification and tortuosity, resulting in a high degree of friction, despite the lower catheter profile. No in-hospital coronary or access site-related complications occurred. Conclusions: This case report illustrates the feasibility of the Stingray LP catheter for the treatment of CTOs via the ADR technique. The lower profile of the catheter potentially increases the deliverability, safety, and exchangeability of the device. PMID:28138123

Vision for the Future of Lws TR&T

NASA Astrophysics Data System (ADS)

Schwadron, N.; Mannucci, A. J.; Antiochos, S. K.; Bhattacharjee, A.; Gombosi, T. I.; Gopalswamy, N.; Kamalabadi, F.; Linker, J.; Pilewskie, P.; Pulkkinen, A. A.; Spence, H. E.; Tobiska, W. K.; Weimer, D. R.; Withers, P.; Bisi, M. M.; Kuznetsova, M. M.; Miller, K. L.; Moretto, T.; Onsager, T. G.; Roussev, I. I.; Viereck, R. A.

2014-12-01

The Living With a Star (LWS) program addresses acute societal needs for understanding the effects of space weather and developing scientific knowledge to support predictive capabilities. Our society's heavy reliance on technologies affected by the space environment, an enormous number of airline customers, interest in space tourism, and the developing plans for long-duration human exploration space missions are clear examples that demonstrate urgent needs for space weather models and detailed understanding of space weather effects and risks. Since its inception, the LWS program has provided a vehicle to innovate new mechanisms for conducting research, building highly effective interdisciplinary teams, and ultimately in developing the scientific understanding needed to transition research tools into operational models that support the predictive needs of our increasingly space-reliant society. The advances needed require broad-based observations that cannot be obtained by large missions alone. The Decadal Survey (HDS, 2012) outlines the nation's needs for scientific development that will build the foundation for tomorrow's space weather services. Addressing these goals, LWS must develop flexible pathways to space utilizing smaller, more diverse and rapid development of observational platforms. Expanding utilization of ground-based assets and shared launches will also significantly enhance opportunities to fulfill the growing LWS data needs. Partnerships between NASA divisions, national/international agencies, and with industry will be essential for leveraging resources to address increasing societal demand for space weather advances. Strengthened connections to user communities will enhance the quality and impact of deliverables from LWS programs. Thus, we outline the developing vision for the future of LWS, stressing the need for deeper scientific understanding to improve forecasting capabilities, for more diverse data resources, and for project deliverables that address the growing needs of user communities.

Panoramic imaging and virtual reality — filling the gaps between the lines

NASA Astrophysics Data System (ADS)

Chapman, David; Deacon, Andrew

Close range photogrammetry projects rely upon a clear and unambiguous specification of end-user requirements to inform decisions relating to the format, coverage, accuracy and complexity of the final deliverable. Invariably such deliverables will be a partial and incomplete abstraction of the real world where the benefits of higher accuracy and increased complexity must be traded against the cost of the project. As photogrammetric technologies move into the digital era, computerisation offers opportunities for the photogrammetrist to revisit established mapping traditions in order to explore new markets. One such market is that for three-dimensional Virtual Reality (VR) models for clients who have previously had little exposure to the capabilities, and limitations, of photogrammetry and may have radically different views on the cost/benefit trade-offs in producing geometric models. This paper will present some examples of the authors' recent experience of such markets, drawn from a number of research and commercial projects directed towards the modelling of complex man-made objects. This experience seems to indicate that suitably configured digital image archives may form an important deliverable for a wide range of photogrammetric projects and supplement, or even replace, more traditional CAD models.

The effect of stent coating on stent deliverability: direct randomised comparison of drug eluting and bare metal stents using the same stent platform.

PubMed

Siminiak, Tomasz; Link, Rafał; Wołoszyn, Maciej; Kałmucki, Piotr; Baszko, Artur

2012-01-01

There is certain experimental and clinical evidence indicating that the covering of bare metal stents (BMS) with drug eluting polymers to produce drug eluting stents (DES) results in increased stent stiffness and modifies the mechanical properties of the stent platform. In addition, it has been speculated that the mechanical performance of DES, compared to BMS, may be related to the type of polymer used to cover stents. We aimed at evaluating the deliverability of DES with a lactate based biodegradable polymer and BMS in patients with stable coronary artery disease in a prospective randomised study. One hundred eleven consecutive patients (age: 36-77, mean 58.8 years) scheduled for routine angioplasty due to stable coronary disease were randomised to receive BMS (Chopin II(TM), Balton, Poland) or paclitaxel eluting stent (Chopin Luc(TM), Balton, Poland) using the same metal platform. Only patients scheduled for angioplasty using the direct implantation technique of a single stent were randomised. The exclusion criteria included patients 〉 80 years, multivessel disease and reference diameter of the target vessel 〉 3.5 mm. In the BMS group (n = 55; 35 males and 20 females), the mean diameter of implanted stents was 3.09 ± 0.40 and the mean length was 11.37 ± 2.80, whereas in the DES group (n = 56; 34 males and 22 females) the mean stent sizes were 3.02 ± 0.34 and 17.90 ± 7.38 mm, respectively (p 〉 0.05 for length). The groups did not significantly differ regarding the frequency of stent implantation to particular coronary vessels. The direct stenting technique was attempted and failed, leading to the stents' implantation after predilatation in five patients in the BMS group and six patients in the DES group. Failure of stent implantation and subsequent implantation of another stent type was observed in no BMS patients and in one DES patient (NS). Although stent covering with lactate based drug eluting polymer may increase its stiffness, it does not affect its deliverability in patients with stable coronary disease.

A Case Study Optimizing Human Resources in Rwanda's First Dental School: Three Innovative Management Tools.

PubMed

Hackley, Donna M; Mumena, Chrispinus H; Gatarayiha, Agnes; Cancedda, Corrado; Barrow, Jane R

2018-06-01

Harvard School of Dental Medicine, University of Maryland School of Dentistry, and the University of Rwanda (UR) are collaborating to create Rwanda's first School of Dentistry as part of the Human Resources for Health (HRH) Rwanda initiative that aims to strengthen the health care system of Rwanda. The HRH oral health team developed three management tools to measure progress in systems-strengthening efforts: 1) the road map is an operations plan for the entire dental school and facilitates delivery of the curriculum and management of human and material resources; 2) each HRH U.S. faculty member develops a work plan with targeted deliverables for his or her rotation, which is facilitated with biweekly flash reports that measure progress and keep the faculty member focused on his or her specific deliverables; and 3) the redesigned HRH twinning model, changed from twinning of an HRH faculty member with a single Rwandan faculty member to twinning with multiple Rwandan faculty members based on shared academic interests and goals, has improved efficiency, heightened engagement of the UR dental faculty, and increased the impact of HRH U.S. faculty members. These new tools enable the team to measure its progress toward the collaborative's goals and understand the successes and challenges in moving toward the planned targets. The tools have been valuable instruments in fostering discussion around priorities and deployment of resources as well as in developing strong relationships, enabling two-way exchange of knowledge, and promoting sustainability.

Preclinical development of a non-toxic oral formulation of monoethanolamine, a lipid precursor, for prostate cancer treatment

PubMed Central

Saxena, Roopali; Yang, Chunhua; Rao, Mukkavilli; Turaga, Ravi Chakra; Garlapati, Chakravarthy; Gundala, Sushma Reddy; Myers, Kimberly; Ghareeb, Ahmed; Bhattarai, Shristi; Kamilinia, Golnaz; Bristi, Sangina; Su, Dan; Gadda, Giovanni; Rida, Padmashree C. G.; Cantuaria, Guilherme H.; Aneja, Ritu

2018-01-01

Purpose Most currently-available chemotherapeutic agents target rampant cell division in cancer cells, thereby affecting rapidly-dividing normal cells resulting in toxic side-effects. This non-specificity necessitates identification of novel cellular pathways that are reprogrammed selectively in cancer cells and can be exploited to develop pharmacologically superior and less-toxic therapeutics. Despite growing awareness on dysregulation of lipid metabolism in cancer cells, targeting lipid biosynthesis is still largely uncharted territory. Herein, we report development of a novel non-toxic orally-deliverable anticancer formulation of monoethanolamine (Etn), for prostate cancer by targeting the Kennedy pathway of phosphatidylethanolamine (PE) lipid biosynthesis. Experimental Design We first evaluated GI-tract stability, drug-drug interaction liability, pharmacokinetic and toxicokinetic properties of Etn to evaluate its suitability as a non-toxic orally-deliverable agent. We next performed in vitro and in vivo experiments to investigate efficacy and mechanism of action. Results Our data demonstrate that Etn exhibits excellent bioavailability, GI-tract stability, and no drug-drug interaction liability. Remarkably, orally-fed Etn inhibited tumor growth in four weeks by ~67% in mice bearing human prostate cancer PC-3 xenografts without any apparent toxicity. Mechanistically, Etn exploits selective overexpression of choline kinase in cancer cells, resulting in accumulation of phosphoethanolamine (PhosE), accompanied by downregulation of HIF-1α that induces metabolic stress culminating into cell death. Conclusions Our study provides first evidence for the superior anticancer activity of Etn, a simple lipid precursor formulation, whose non-toxicity conforms to FDA-approved standards, compelling its clinical development for prostate cancer management. PMID:28167510

Deliverability and efficacy of R-CHOP chemotherapy in very elderly patients with diffuse large B-cell lymphoma: an Australian retrospective analysis.

PubMed

Millar, A; Ellis, M; Mollee, P; Cochrane, T; Fletcher, J; Caudron, A; Webster, B; Trotman, J

2015-11-01

Elderly patients with diffuse large B-cell lymphoma (DLBCL) have an inferior prognosis, due in part to advanced age and pre-existing comorbidities, with reduced tolerability and deliverability of standard R-CHOP chemotherapy. To examine the deliverability, toxicity and efficacy of R-CHOP and the prevalence of the germinal and non-germinal phenotype DLBCL in an elderly Australian cohort. This retrospective analysis included patients ≥75 years diagnosed with DLBCL. Comprehensive chemotherapy and toxicity data were collected for patients treated with R-CHOP. Baseline demographics and chemotherapy characteristics were compared with progression-free (PFS) and overall survival (OS). Immunohistochemical staining identified the prevalence of the non-germinal centre (non-GCB) phenotype. Of the 111 patients, 92 (83%) commenced R-CHOP with 26/92 (28%) receiving ≤4 cycles. Median average relative dose (ARD) was 0.80 (0.07-1.17). Median average relative dose intensity (ARDI) was 0.89 (0.33-1.18). Serious adverse events occurred in 77% of patients with ≥Gd3 adverse events in 74%. Overall response rate was 85%. Two-year PFS was 63% and OS 74%. ARD and performance status ≥2 were significant prognostic factors for PFS and OS but not ARDI. Non-GCB-phenotype was identified in 44/72 (61%) of patients with immunohistochemical data. Despite high response rates and respectable survival estimates, the absence of standard therapy in 17% of patients, and dose reductions and serious toxicity of R-CHOP in this Australian cohort highlights the need for the development of less toxic yet efficacious treatments for very elderly patients with DLBCL. The high prevalence of the non-GCB phenotype highlights the potential value of targeted biological therapy for this demographic. © 2015 Royal Australasian College of Physicians.

Multi-centre audit of VMAT planning and pre-treatment verification.

PubMed

Jurado-Bruggeman, Diego; Hernández, Victor; Sáez, Jordi; Navarro, David; Pino, Francisco; Martínez, Tatiana; Alayrach, Maria-Elena; Ailleres, Norbert; Melero, Alejandro; Jornet, Núria

2017-08-01

We performed a multi-centre intercomparison of VMAT dose planning and pre-treatment verification. The aims were to analyse the dose plans in terms of dosimetric quality and deliverability, and to validate whether in-house pre-treatment verification results agreed with those of an external audit. The nine participating centres encompassed different machines, equipment, and methodologies. Two mock cases (prostate and head and neck) were planned using one and two arcs. A plan quality index was defined to compare the plans and different complexity indices were calculated to check their deliverability. We compared gamma index pass rates using the centre's equipment and methodology to those of an external audit (global 3D gamma, absolute dose differences, 10% of maximum dose threshold). Log-file analysis was performed to look for delivery errors. All centres fulfilled the dosimetric goals but plan quality and delivery complexity were heterogeneous and uncorrelated, depending on the manufacturer and the planner's methodology. Pre-treatment verifications results were within tolerance in all cases for gamma 3%-3mm evaluation. Nevertheless, differences between the external audit and in-house measurements arose due to different equipment or methodology, especially for 2%-2mm criteria with differences up to 20%. No correlation was found between complexity indices and verification results amongst centres. All plans fulfilled dosimetric constraints, but plan quality and complexity did not correlate and were strongly dependent on the planner and the vendor. In-house measurements cannot completely replace external audits for credentialing. Copyright © 2017 Elsevier B.V. All rights reserved.

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and US. Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US. Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date.

Contingency Contracting Officer Proficiency Assessment Test Development for Construction, Architect-Engineer, and Contingency Contracting

DTIC Science & Technology

2013-03-01

of written questions and answers to the USACE upon completion of test production . E. POTENTIAL BENEFITS The use of a proficiency test by the USACE...the USACE, the sponsoring agency, to determine an end- product deliverable that would assist the agency with its mission needs. Because this project...as well as the production of and feedback from 11 the pilot PAT. In Chapter V, the researchers summarize the project and present the conclusion

BIG SKY CARBON SEQUESTRATION PARTNERSHIP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Susan M. Capalbo

2004-10-31

The Big Sky Carbon Sequestration Partnership, led by Montana State University, is comprised of research institutions, public entities and private sectors organizations, and the Confederated Salish and Kootenai Tribes and the Nez Perce Tribe. Efforts under this Partnership fall into four areas: evaluation of sources and carbon sequestration sinks; development of GIS-based reporting framework; designing an integrated suite of monitoring, measuring, and verification technologies; and initiating a comprehensive education and outreach program. At the first two Partnership meetings the groundwork was put in place to provide an assessment of capture and storage capabilities for CO{sub 2} utilizing the resources foundmore » in the Partnership region (both geological and terrestrial sinks), that would complement the ongoing DOE research. During the third quarter, planning efforts are underway for the next Partnership meeting which will showcase the architecture of the GIS framework and initial results for sources and sinks, discuss the methods and analysis underway for assessing geological and terrestrial sequestration potentials. The meeting will conclude with an ASME workshop. The region has a diverse array of geological formations that could provide storage options for carbon in one or more of its three states. Likewise, initial estimates of terrestrial sinks indicate a vast potential for increasing and maintaining soil C on forested, agricultural, and reclaimed lands. Both options include the potential for offsetting economic benefits to industry and society. Steps have been taken to assure that the GIS-based framework is consistent among types of sinks within the Big Sky Partnership area and with the efforts of other western DOE partnerships. Efforts are also being made to find funding to include Wyoming in the coverage areas for both geological and terrestrial sinks and sources. The Partnership recognizes the critical importance of measurement, monitoring, and verification technologies to support not only carbon trading but all policies and programs that DOE and other agencies may want to pursue in support of GHG mitigation. The efforts begun in developing and implementing MMV technologies for geological sequestration reflect this concern. Research is also underway to identify and validate best management practices for soil C in the Partnership region, and to design a risk/cost effectiveness framework to make comparative assessments of each viable sink, taking into account economic costs, offsetting benefits, scale of sequestration opportunities, spatial and time dimensions, environmental risks, and long-term viability. Scientifically sound information on MMV is critical for public acceptance of these technologies. Two key deliverables were completed in the second quarter--a literature review/database to assess the soil carbon on rangelands, and the draft protocols, contracting options for soil carbon trading. The protocols developed for soil carbon trading are unique and provide a key component of the mechanisms that might be used to efficiently sequester GHG and reduce CO{sub 2} concentrations. While no key deliverables were due during the third quarter, progress on other deliverables is noted in the PowerPoint presentations and in this report. A series of meetings held during the second and third quarters have laid the foundations for assessing the issues surrounding carbon sequestration in this region, the need for a holistic approach to meeting energy demands and economic development potential, and the implementation of government programs or a market-based setting for soil C credits. These meetings provide a connection to stakeholders in the region and a basis on which to draw for the DOE PEIS hearings. In the fourth quarter, three deliverables have been completed, some in draft form to be revised and updated to include Wyoming. This is due primarily to some delays in funding to LANL and INEEL and the approval of a supplemental proposal to include Wyoming in much of the GIS data sets, analysis, and related materials. The deliverables are discussed in the following sections and greater details are provided in the materials that are attached to this report. In August 2004, a presentation was made to Pioneer Hi-Bred, discussing the Partnership and the synergies with terrestrial sequestration, agricultural industries, and ongoing, complimentary USDA efforts. The Partnership organized a Carbon session at the INRA 2004 Environmental and Subsurface Science Symposium in September 2004; also in September, a presentation was made to the Wyoming Carbon Sequestration Advisory Committee, followed up with a roundtable discussion.« less

DCS: A Case Study of Identification of Knowledge and Disposition Gaps Using Principles of Continuous Risk Management

NASA Technical Reports Server (NTRS)

Norcross, Jason; Steinberg, Susan; Kundrot, Craig; Charles, John

2011-01-01

The Human Research Program (HRP) is formulated around the program architecture of Evidence-Risk-Gap-Task-Deliverable. Review of accumulated evidence forms the basis for identification of high priority risks to human health and performance in space exploration. Gaps in knowledge or disposition are identified for each risk, and a portfolio of research tasks is developed to fill them. Deliverables from the tasks inform the evidence base with the ultimate goal of defining the level of risk and reducing it to an acceptable level. A comprehensive framework for gap identification, focus, and metrics has been developed based on principles of continuous risk management and clinical care. Research towards knowledge gaps improves understanding of the likelihood, consequence or timeframe of the risk. Disposition gaps include development of standards or requirements for risk acceptance, development of countermeasures or technology to mitigate the risk, and yearly technology assessment related to watching developments related to the risk. Standard concepts from clinical care: prevention, diagnosis, treatment, monitoring, rehabilitation, and surveillance, can be used to focus gaps dealing with risk mitigation. The research plan for the new HRP Risk of Decompression Sickness (DCS) used the framework to identify one disposition gap related to establishment of a DCS standard for acceptable risk, two knowledge gaps related to DCS phenomenon and mission attributes, and three mitigation gaps focused on prediction, prevention, and new technology watch. These gaps were organized in this manner primarily based on target for closure and ease of organizing interim metrics so that gap status could be quantified. Additional considerations for the knowledge gaps were that one was highly design reference mission specific and the other gap was focused on DCS phenomenon.

New bomb, no mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mello, G.

1997-05-01

The cold war may be over, but the nuclear arms race has not quite ended. The United States is fielding a new nuclear weapon-a bomb that was used to threaten Libya, a non-nuclear nation, even before it was deployed. The B61 {open_quotes}mod-11{close_quotes} gravity bomb is the first nuclear capability added to the US arsenal since 1989. It was developed and deployed secretly, without public or congressional debate, and in apparent contradiction to official domestic and international assurances that no new nuclear weapons were being developed in the United States. The B61-11`s unique earth-penetrating characteristic and wide range of yields allowmore » it to threaten otherwide indestructible targets from the air-or, in Pentagonese, to hold such targets {open_quotes}at risk.{close_quotes} That makes the B61-11 a uniquely useful warfighting tool. The 1,200-pound B61-11 replaces the B53, a 8,900-pound, nine-megaton bomb that was developed as a {open_quotes}city buster{close_quotes} and was later designated as a substitute for an earth-penetrating weapon. The B53 was deliverable only by vulnerable B-52s; in contrast, the smaller and lighter B61-11 can be delivered the the stealthier B-2A bomber, or even by F16 fighters.« less

Immobilization of mercury in field soil and sediment using carboxymethyl cellulose stabilized iron sulfide nanoparticles

NASA Astrophysics Data System (ADS)

Gong, Yanyan; Liu, Yuanyuan; Xiong, Zhong; Kaback, Dawn; Zhao, Dongye

2012-07-01

Mercury (Hg) is one of the most pervasive and bio-accumulative metals in the environment. Yet, effective in situ remediation technologies have been lacking. This study investigated the effectiveness of a class of soil-deliverable FeS nanoparticles for in situ immobilization of Hg in two field-contaminated soils from a New Jersey site and one sediment from an Alabama site. The nanoparticles were prepared using sodium carboxymethyl cellulose (CMC) as a stabilizer. Transmission electron microscopy measurements revealed a particle size of 34.3 ± 8.3 nm (standard deviation), whereas dynamic light scattering gave a hydrodynamic diameter of 222.5 ± 3.2 nm. Batch tests showed that at an FeS-to-Hg molar ratio of 28:1-118:1, the nanoparticles reduced water-leachable Hg by 79%-96% and the TCLP (toxicity characteristic leaching procedure) based leachability by 26%-96%. Column breakthrough tests indicated that the nanoparticles were deliverable in the sediment/soil columns under moderate injection pressure. However, once the external pressure was removed, the delivered nanoparticles remained virtually mobile under typical groundwater flow conditions. When the Hg-contaminated soil and sediment were treated with 52-95 pore volumes of a 500 mg l-1 FeS nanoparticle suspension, water-leachable Hg was reduced by 90%-93% and TCLP-leachable Hg was reduced by 65%-91%. The results warrant further field demonstration of this promising in situ remediation technology.

Delivering bad news in emergency care medicine.

PubMed

Maynard, Douglas W

2017-01-01

Forecasting is a strategy for delivering bad news and is compared to two other strategies, stalling and being blunt. Forecasting provides some warning that bad news is forthcoming without keeping the recipient in a state of indefinite suspense (stalling) or conveying the news abruptly (being blunt). Forecasting appears to be more effective than stalling or being blunt in helping a recipient to "realize" the bad news because it involves the deliverer and recipient in a particular social relation. The deliverer of bad news initiates the telling by giving an advance indication of the bad news to come; this allows the recipient to calculate the news in advance of its final presentation, when the deliverer confirms what the recipient has been led to anticipate. Thus, realization of bad news emerges from intimate collaboration, whereas stalling and being blunt require recipients to apprehend the news in a social vacuum. Exacerbating disruption to recipients' everyday world, stalling and being blunt increase the probability of misapprehension (denying, blaming, taking the situation as a joke, etc.) and thereby inhibit rather than facilitate realization. Particular attention is paid to the "perspective display sequence", a particular forecasting strategy that enables both confirming the recipient's perspective and using that perspective to affirm the clinical news. An example from acute or emergency medicine is examined at the close of the paper.

Specifications and Prototype of the Knowledge Repository (V.3.0) and the Knowledge Mediator (V.3.0)

ERIC Educational Resources Information Center

Andreou, Dimitris; Christophides, Vassilis; Flouris, Giorgos; Kotzinos, Dimitris; Pediaditis, Panagiotis; Tsialiamanis, Petros

2009-01-01

This deliverable reports the technical and research development performed until M36 (January 2009) within tasks T5.2 and T5.4 of WP5 in the KP-Lab project, per the latest Description of Work (DoW) 3.2 [DoW3.2]. The described components are included in the KP-Lab Semantic Web Knowledge Middleware (SWKM) Prototype Release 3.0 software that takes…

Naval Remote Ocean Sensing System (NROSS) study

NASA Technical Reports Server (NTRS)

1983-01-01

A set of hardware similar to the SEASAT A configuration requirement, suitable for installation and operation aboard a NOAA-D bus and a budgetary cost for one (1) protoflight model was provided. The scatterometer sensor is conceived as one of several sensors for the Navy Remote Ocean Sensing System (NROSS) Satellite Program. Deliverables requested were to include a final report with appropriate sketches and block diagrams showing the scatterometer design/configuration and a budgetary cost for all labor and materials to design, fabricate, test, and integrate this hardware into a NOAA-D satellite bus. This configuration consists of two (2) hardware assembles - a transmitter/receiver (T/R) assembly and an integrated electronics assembly (IEA). The T/R assembly as conceived is best located at the extreme opposite end of the satellite away from the solar array assembly and oriented in position to enable one surface of the assembly to have unobstructed exposure to space. The IEA is planned to be located at the bottom (Earth viewing) side of the satellite and requires a radiating plate.

Computational Approach for Improving Three-Dimensional Sub-Surface Earth Structure for Regional Earthquake Hazard Simulations in the San Francisco Bay Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodgers, A. J.

In our Exascale Computing Project (ECP) we seek to simulate earthquake ground motions at much higher frequency than is currently possible. Previous simulations in the SFBA were limited to 0.5-1 Hz or lower (Aagaard et al. 2008, 2010), while we have recently simulated the response to 5 Hz. In order to improve confidence in simulated ground motions, we must accurately represent the three-dimensional (3D) sub-surface material properties that govern seismic wave propagation over a broad region. We are currently focusing on the San Francisco Bay Area (SFBA) with a Cartesian domain of size 120 x 80 x 35 km, butmore » this area will be expanded to cover a larger domain. Currently, the United States Geologic Survey (USGS) has a 3D model of the SFBA for seismic simulations. However, this model suffers from two serious shortcomings relative to our application: 1) it does not fit most of the available low frequency (< 1 Hz) seismic waveforms from moderate (magnitude M 3.5-5.0) earthquakes; and 2) it is represented with much lower resolution than necessary for the high frequency simulations (> 5 Hz) we seek to perform. The current model will serve as a starting model for full waveform tomography based on 3D sensitivity kernels. This report serves as the deliverable for our ECP FY2017 Quarter 4 milestone to FY 2018 “Computational approach to developing model updates”. We summarize the current state of 3D seismic simulations in the SFBA and demonstrate the performance of the USGS 3D model for a few selected paths. We show the available open-source waveform data sets for model updates, based on moderate earthquakes recorded in the region. We present a plan for improving the 3D model utilizing the available data and further development of our SW4 application. We project how the model could be improved and present options for further improvements focused on the shallow geotechnical layers using dense passive recordings of ambient and human-induced noise.« less

Randomized comparison of deliverability and in-hospital complications in implantation of BxSonic(R), Express(R), and Flexmaster(R) coronary stents.

PubMed

Thuesen, Leif; Galløe, Anders; Thayssen, Per; Rasmussen, Klaus; Kelbæk, Henning; Lassen, Jens Flensted; Hansen, Peter Riis; Pedersen, Knud Erik; Ravkilde, Jan; Helquist, Steffen; Abildgaard, Ulrik; Andersen, Henning Rud; Bøtker, Hans Erik; Kristensen, Steen Dalby; Hjort, Jacob; Krusell, Lars Romer

2005-11-01

To compare deliverability and in-hospital complications in implantation of BxSonic(R), Express(R), and Flexmaster(R) coronary stents in a randomized multicenter trial in five Danish interventional centres. Patients with planned stenting of at least one stenotic lesion in a native coronary artery were included in the study. There were 494 (664) patients (treated lesions) in the BxSonic(R), 499 (657) in the Express(R) and 500 (658) in the Flexmaster(R) groups. The groups were well matched with regard to age, sex, diabetes, smoking, hypercholesterolemia, hypertension, indication for PCI and coronary artery lesion complexity. The study stents were implanted with or without predilatation according to ordinary -clinical practice.Rates of successful stent implantation and in-hospital stent thrombosis, re-intervention, non-fatal myocardial infarction or death. The BxSonic(R), Express(R) and Flexmaster(R) stents were successfully implanted in 92,2%, 89,3% and 91,6% of all lesions (ns). There were no in-hospital deaths and the rates of in-hospital complications were similar in the three stent groups. We found similar deliverability and in-hospital complication rates of the BxSonic(R), Express(R) and Flexmaster(R) stents.

Influences Determining European Coal Seam Gas Deliverability

NASA Astrophysics Data System (ADS)

Clark, G.

2009-04-01

Technically the coal basins of Europe have generated significant Gas In Place figures that has historically generated investor's interest in the development of this potential coal seam gas (CSG) resource. In the early 1980's, a wave of international, principally American, companies arrived, established themselves, drilled and then left with a poor record of success and disappointed investors. Recently a second wave of investment started after 2002, with the smaller companies leading the charge but have the lesson been learned from the past failures? To select a CSG investment project the common European approach has been to: 1. Find an old mining region; 2. Look to see if it had a coal mine methane gas problem; 3. Look for the non-mined coal seams; and 4. Peg the land. This method is perhaps the reason why the history of CSG exploration in Europe is such a disappointment as generally the coal mining regions of Europe do not have commercial CSG reservoir attributes. As a result, investors and governments have lost confidence that CSG will be a commercial success in Europe. New European specific principles for the determination of commercial CSG prospects have had to be delineated that allow for the selection of coal basins that have a strong technical case for deliverability. This will result in the return of investor confidence.

Analysis of Performance of Selected AFC, ATF Fuels, and Lanthanide Transport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unal, Cetin; Galloway, Jack D.

2015-09-29

We started to look at the performance of ATF concept in LWRs late in FY14 and finish our studies in FY15. The work has been presented in AFC review meetings, ICAPP and TOPFUEL conferences. The final version of the work is accepted for publication in Nuclear Engineering and Science Journal (NES). The copy of ICAPP and NES papers are attached separately to this document as our milestone deliverables. We made an important progress in the modeling of lanthanide transport in FY15. This work produced an ANS Winter Meeting paper and GLOBAL 2015 paper. GLOBAL 2015 paper is also attached asmore » deliverable of FY15. The work on the lanthanide transport is preliminary. We are exploring other potential mechanisms, in addition to “liquid-like” diffusion mechanisms, proposed by Robert Mariani [1] before we analyze data that will be taken by Ohio State University. This year, we concentrate on developing diffusion kernels and principles of modeling. Next year, this work will continue and analyze the Ohio State data and develop approaches to solve multicomponent diffusion. In addition to three papers we attached to this report, we have done some research on coupling and the development of gas release model for metallic fuels in FY15. They are also preliminary in nature; therefore, we give the summary of what we found rather than an extended report that will be done in FY16.« less

SU-G-BRC-02: A Novel Multi-Criteria Optimization Approach to Generate Deliverable Intensity-Modulated Radiation Therapy (IMRT) Treatment Plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirlik, G; D’Souza, W; Zhang, H

2016-06-15

Purpose: To present a novel multi-criteria optimization (MCO) solution approach that generates treatment plans with deliverable apertures using column generation. Methods: We demonstrate our method with 10 locally advanced head-and-neck cancer cases retrospectively. In our MCO formulation, we defined an objective function for each structure in the treatment volume. This resulted in 9 objective functions, including 3 distinct objectives for primary target volume, high-risk and low-risk target volumes, 5 objectives for each of the organs-at-risk (OARs) (two parotid glands, spinal cord, brain stem and oral cavity), and one for the non-target non-OAR normal tissue. Conditional value-at-risk (CVaR) constraints were utilizedmore » to ensure at least certain fraction of the target volumes receiving the prescription doses. To directly generate deliverable plans, column generation algorithm was embedded within our MCO approach for aperture shape generation. Final dose distributions for all plans were generated using a Monte Carlo kernel-superposition dose calculation. We compared the MCO plans with the clinical plans, which were created by clinicians. Results: At least 95% target coverage was achieved by both MCO plans and clinical plans. However, the average conformity indices of clinical plans and the MCO plans were 1.95 and 1.35, respectively (31% reduction, p<0.01). Compared to the conventional clinical plan, the proposed MCO method achieved average reductions in left parotid mean dose of 5% (p=0.06), right parotid mean dose of 18% (p<0.01), oral cavity mean dose of 21% (p=0.03), spinal cord maximum dose of 20% (p<0.01), brain stem maximum dose of 61% (p<0.01), and normal tissue maximum dose of 5% (p<0.01), respectively. Conclusion: We demonstrated that the proposed MCO method was able to obtain deliverable IMRT treatment plans while achieving significant improvements in dosimetric plan quality.« less

Virtual environments from panoramic images

NASA Astrophysics Data System (ADS)

Chapman, David P.; Deacon, Andrew

1998-12-01

A number of recent projects have demonstrated the utility of Internet-enabled image databases for the documentation of complex, inaccessible and potentially hazardous environments typically encountered in the petrochemical and nuclear industries. Unfortunately machine vision and image processing techniques have not, to date, enabled the automatic extraction geometrical data from such images and thus 3D CAD modeling remains an expensive and laborious manual activity. Recent developments in panoramic image capture and presentation offer an alternative intermediate deliverable which, in turn, offers some of the benefits of a 3D model at a fraction of the cost. Panoramic image display tools such as Apple's QuickTime VR (QTVR) and Live Spaces RealVR provide compelling and accessible digital representations of the real world and justifiably claim to 'put the reality in Virtual Reality.' This paper will demonstrate how such technologies can be customized, extended and linked to facility management systems delivered over a corporate intra-net to enable end users to become familiar with remote sites and extract simple dimensional data. In addition strategies for the integration of such images with documents gathered from 2D or 3D CAD and Process and Instrumentation Diagrams (P&IDs) will be described as will techniques for precise 'As-Built' modeling using the calibrated images from which panoramas have been derived and the use of textures from these images to increase the realism of rendered scenes. A number of case studies relating to both nuclear and process engineering will demonstrate the extent to which such solution are scaleable in order to deal with the very large volumes of image data required to fully document the large, complex facilities typical of these industry sectors.

Natural Stream Channel Design Techniques and Review

EPA Pesticide Factsheets

Need for a Review Checklist: Stream restoration problems include; design complexity, many different design methodologies, inconsistency in design deliverables, communication difficulties, many failed projects

Definition, aims, and implementation of GA(2) LEN Urticaria Centers of Reference and Excellence.

PubMed

Maurer, M; Metz, M; Bindslev-Jensen, C; Bousquet, J; Canonica, G W; Church, M K; Godse, K V; Grattan, C E; Hide, M; Kocatürk, E; Magerl, M; Makris, M; Meshkova, R; Saini, S S; Sussman, G; Toubi, E; Zhao, Z; Zuberbier, T; Gimenez-Arnau, A

2016-08-01

GA²LEN, the Global Allergy and Asthma European Network, has recently launched a program for the development, interaction, and accreditation of centers of reference and excellence in special areas of allergy embedded in its overall quality management of allergy centers of excellence. The first area chosen is urticaria. Urticaria is a common and debilitating condition and can be a challenge for both patients and treating physicians, especially when chronic. Centers of reference and excellence in urticaria (UCAREs) can help to improve the management of hard-to-treat conditions such as urticaria. Here, we describe the aims, the requirements and deliverables, the application process, and the audit and accreditation protocol for GA²LEN UCAREs. The main aims of GA²LEN UCAREs are to provide excellence in urticaria management, to increase the knowledge of urticaria by research and education, and to promote the awareness of urticaria by advocacy activities. To become a certified GA²LEN UCARE, urticaria centers have to apply and fulfill 32 requirements, defined by specific deliverables that are assessed during an audit visit. The GA²LEN UCARE program will result in a strong network of urticaria specialists, promote urticaria research, and harmonize and improve urticaria management globally. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Engineering parameters used in geopressured geothermal Fairway evaluation and test-well site location, Frio formation, Texas Gulf Coast

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gregory, A.R.; Meriwether, J.

1977-01-01

Adequate deliverability of fluids from reservoirs with temperatures higher than 300/sup 0/F is a key factor in evaluating geopressured geothermal resources. In the Austin Bayou Prospect, Brazoria County, Texas, permeability is difficult to evaluate before wells are drilled and tested. However, this report discusses how reservoir pressure decline and high temperature reduce permeability. The history of gas-condensate production from geopressured reservoirs in the Chocolate Bayou field, located near the Austin Bayou Prospect, shows that deliverability of hydrocarbons is high in the early life of the reservoirs but drops sharply as pressure declines. Average geothermal gradient is 1.8/sup 0/F per hundredmore » feet and reservoir pressure gradients lie between 0.465 and 0.98 psia per foot for depths below 10,000 feet. Salinities vary from 40,000 to 80,000 ppM and methane content may range from 25 to 45 cubic feet per barrel for formation waters commonly found in the Chocolate Bayou field. The effective gas permeabilities determined from production flow tests are estimated to range from 1 to 6 millidarcys and absolute permeabilities lie between 2 and 10 millidarcys. More than 10 billion barrels of water inferred to occur in place in the prospective sandstone reservoirs of the Austin Bayou prospect contain potentially 1,733 MW-years of electrical energy and 400 billion cubic feet of methane in solution.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khan, S; Chin, E; Xing, L

Purpose: The integration of couch motion during arc delivery is necessitated to enable irradiation trajectories such as coronal arcs, and to enhance the geometrical sampling for dynamic deliveries to the highest extent. To enable such capability, a platform of Trajectory Modulated Arc Therapy (TMAT) is developed in conjunction with standardized noncollisional dynamic path-set for irradiation of intracranial lesions. Methods: A generalized path-set was constructed through the combination of sagittal arcs (45 degrees from the CAX), axial arcs, and coronal arcs produced through modulation of the dynamic rotation of couch. The standardized path was implemented in a contiguous manner enabling themore » formation of fully automated sub-trajectories to provide maximal geometrical convergence with minimal number of arcs. Progressive sampling technique is used for direct aperture optimization of the MLCs and the selection of couch positions across the control points. Dosimetry of the resulting plans was assessed relative to clinically delivered plans. Using the TrueBeam Developer Mode, plan deliverability was tested. Results: Treatment planning of TMAT sub-trajectories for central, anterior and posterior tumor sites with volumes ranging from 4.75cc to 107cc demonstrated radically reduced doses to the critical OARs when compared to the clinically treated VMAT. Specifically, percentage reduction in mean dose for critical organs such as brainstem, cochlea, and optic nerve are found to be as low as 74±15%, 50±26% and 74±30% respectively as compared to VMAT. Conformity Index, defined as the ratio of tumor volume (VPTV) and 100% dose volume (V(D100%)), was reduced up to 12% while the Gradient Index, defined as V(D100%)/V(D50%), was concurrently improved by up to 14%. Conclusion: An automated standardized trajectory with dynamically modulated couch-gantry arcs has been developed for intracranial radiotherapy. Through the incorporation of coronal arcs, it is demonstrated that significantly reduced OAR doses can be achieved relative to clinically treated patient plans via VMAT. Research Grant Funding Support by Varian Medical Systems.« less

Human Health Countermeasures (HHC) Element Management Plan: Human Research Program. Revision B

NASA Technical Reports Server (NTRS)

Norsk, Peter; Baumann, David

2012-01-01

NASA s Human Research Program (HRP) is an applied research and technology program within the Human Exploration and Operations Mission Directorate (HEOMD) that addresses human health and performance risk mitigation strategies in support of exploration missions. The HRP research and technology development is focused on the highest priority risks to crew health and safety with the goal of ensuring mission success and maintaining long-term crew health. Crew health and performance standards, defined by the NASA Chief Health and Medical Officer (CHMO), set the acceptable risk level for exploration missions. The HRP conducts research to inform these standards as well as provide deliverables, such as countermeasures, that ensure standards can be met to maximize human performance and mission success. The Human Health Countermeasures (HHC) Element was formed as part of the HRP to develop a scientifically-based, integrated approach to understanding and mitigating the health risks associated with human spaceflight. These health risks have been organized into four research portfolios that group similar or related risks. A fifth portfolio exists for managing technology developments and infrastructure projects. The HHC Element portfolios consist of: a) Vision and Cardiovascular; b) Exercise and Performance; c) Multisystem; d) Bone; and e) Technology and Infrastructure. The HHC identifies gaps associated with the health risks and plans human physiology research that will result in knowledge required to more fully understand risks and will result in validated countermeasures to mitigate risks.

OpenMDAO Framework Status

NASA Technical Reports Server (NTRS)

Naiman, Cynthia Gutierrez

2010-01-01

Advancing and exploring the science of Multidisciplinary Analysis & Optimization (MDAO) capabilities are high-level goals in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project. The OpenMDAO team has made significant progress toward completing the Alpha OpenMDAO deliverable due in September 2010. Included in the presentation are: details of progress on developing the OpenMDAO framework, example usage of OpenMDAO, technology transfer plans, near term plans, progress toward establishing partnerships with external parties, and discussion of additional potential collaborations.

Tri-Lab Co-Design Milestone: In-Depth Performance Portability Analysis of Improved Integrated Codes on Advanced Architecture.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert J.; Hammond, Simon David; Richards, David

2017-09-01

This milestone is a tri-lab deliverable supporting ongoing Co-Design efforts impacting applications in the Integrated Codes (IC) program element Advanced Technology Development and Mitigation (ATDM) program element. In FY14, the trilabs looked at porting proxy application to technologies of interest for ATS procurements. In FY15, a milestone was completed evaluating proxy applications in multiple programming models and in FY16, a milestone was completed focusing on the migration of lessons learned back into production code development. This year, the co-design milestone focuses on extracting the knowledge gained and/or code revisions back into production applications.

The TMIS life-cycle process document, revision A

NASA Technical Reports Server (NTRS)

1991-01-01

The Technical and Management Information System (TMIS) Life-Cycle Process Document describes the processes that shall be followed in the definition, design, development, test, deployment, and operation of all TMIS products and data base applications. This document is a roll out of TMIS Standards Document (SSP 30546). The purpose of this document is to define the life cycle methodology that the developers of all products and data base applications and any subsequent modifications shall follow. Included in this methodology are descriptions of the tasks, deliverables, reviews, and approvals that are required before a product or data base application is accepted in the TMIS environment.

GCS component development cycle

NASA Astrophysics Data System (ADS)

Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

2012-09-01

The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

MO-G-201-04: Knowledge-Based Planning for Single-Isocenter Stereotactic Radiosurgery to Multiple Brain Metastases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ziemer, B; Shiraishi, S; Hattangadi-Gluth, J

Purpose: Single-isocenter, linac-based SRS for multiple brain metastases (multi-mets) can deliver highly conformal radiation doses and reduce overall patient treatment time compared to other therapy techniques. This study aims to quantify the dosimetric benefits of knowledge-based planning (KBP) for multi-met treatments. Methods: Using a previously-published KBP methodology (an artificial neural network (ANN) trained on single-target linac-based SRS plans), 3D dose distribution predictions for multi-met patients were obtained by treating each brain lesion as a solitary target and subsequently combining individual predictions into a single distribution using a dose-weighted geometric averaging to obtain the best results in the inter-target space. 17more » previously-treated multi-met plans, with target numbers ranging from N=2–5, were used to validate the ANN predictions and subsequent KBP auto-planning routine. The fully-deliverable KBP plans were developed by converting dose distribution predictions into patient-specific optimization objectives while maintaining identical target normalizations (typically PTV V100%=D98%). Plan quality improvements were quantified by the difference between SRS quality metrics (QMs): δdQM=QM(clinical)-QM(KBP). QMs of interest were: gradient measure (GM), conformity index (CI), brain V10 and V5, brainstem D0.1cc and heterogeneity index (HI). Finally, overall plan quality was judged via blinded plan comparison by SRS-specializing physicians. Results: Two clinical plans were found to be significant outliers wherein plan quality was dramatically worse than KBP. Despite indicating KBP superiority, these were removed from the QM analysis to prevent skewing the results. In the remaining cases, clinical and KBP QMs were nearly identical with modest improvements in the KBP sample: δGM=0.12±0.56mm, δCI=−0.01±0.04, Brain δV10=0.8±2.6cc, brain δV5=6.3 ±10.7cc, brainstem δD0.1cc=0.06±1.19Gy and δHI= −0.04±0.05. Ultimately, 13/17 KBP plans were deemed superior to the manual plans in blinded physician review. Conclusion: The results demonstrate that KBP-driven automated planning in linac-based single-isocenter treatments for multiple brain metastases is indistinguishable from, or even better than, traditional manual planning. J. Hattangadi: Research Grant; Varian Medical Systems; K.L. Moore: Research Grant: Varian Medical Systems.« less

Cost and Schedule Analytical Techniques Development: Option 2 Year

NASA Technical Reports Server (NTRS)

1997-01-01

This Final Report summarizes the activities performed by Science Applications International Corporation (SAIC) for the Option 2 Year from December 1, 1996 through November 30, 1997. The Final Report is in compliance with Paragraph 5 of Section F of the contract. This CSATD contract provides products and deliverable in the form of models, data bases, methodologies, studies and analyses for the NASA Marshall Space Flight Center's (MSFC) Engineering Cost Office (PPO3) the Program Plans and Requirements Officer (PP02), and other user organizations. Detailed Monthly Progress reports were submitted to MSFC in accordance with the contract's Statement of Work, Section TV "Reporting and Documentation". These reports spelled out each month's specific work accomplishments, deliverables submitted, major meetings held, and other pertinent information. This Final Report will summarize these activities at higher level. During this contract Option Year, SAIC expended 29,830 man-hours in tile performance of tasks called out in the Statement of Work and reported oil in this yearly Final Report. This represents approximately 16 full-time EPs. Included are the basis Huntsville-based team, plus SAIC specialists in San Diego, Ames Research Center, Chicago, and Colorado Springs performing specific tasks for which they are uniquely qualified.

An optimal system design process for a Mars roving vehicle

NASA Technical Reports Server (NTRS)

Pavarini, C.; Baker, J.; Goldberg, A.

1971-01-01

The problem of determining the optimal design for a Mars roving vehicle is considered. A system model is generated by consideration of the physical constraints on the design parameters and the requirement that the system be deliverable to the Mars surface. An expression which evaluates system performance relative to mission goals as a function of the design parameters only is developed. The use of nonlinear programming techniques to optimize the design is proposed and an example considering only two of the vehicle subsystems is formulated and solved.

Application of fuzzy logic-neural network based reinforcement learning to proximity and docking operations: Translational controller results

NASA Technical Reports Server (NTRS)

Jani, Yashvant

1992-01-01

The reinforcement learning techniques developed at Ames Research Center are being applied to proximity and docking operations using the Shuttle and Solar Maximum Mission (SMM) satellite simulation. In utilizing these fuzzy learning techniques, we also use the Approximate Reasoning based Intelligent Control (ARIC) architecture, and so we use two terms interchangeable to imply the same. This activity is carried out in the Software Technology Laboratory utilizing the Orbital Operations Simulator (OOS). This report is the deliverable D3 in our project activity and provides the test results of the fuzzy learning translational controller. This report is organized in six sections. Based on our experience and analysis with the attitude controller, we have modified the basic configuration of the reinforcement learning algorithm in ARIC as described in section 2. The shuttle translational controller and its implementation in fuzzy learning architecture is described in section 3. Two test cases that we have performed are described in section 4. Our results and conclusions are discussed in section 5, and section 6 provides future plans and summary for the project.

Repository-Based Software Engineering (RBSE) program

NASA Technical Reports Server (NTRS)

1992-01-01

Support of a software engineering program was provided in the following areas: client/customer liaison; research representation/outreach; and program support management. Additionally, a list of deliverables is presented.

Optimal position of the transmitter coil for wireless power transfer to the implantable device.

PubMed

Jinghui Jian; Stanaćević, Milutin

2014-01-01

The maximum deliverable power through inductive link to the implantable device is limited by the tissue exposure to the electromagnetic field radiation. By moving away the transmitter coil from the body, the maximum deliverable power is increased as the magnitude of the electrical field at the interface with the body is kept constant. We demonstrate that the optimal distance between the transmitter coil and the body is on the order of 1 cm when the current of the transmitter coil is limited to 1 A. We also confirm that the conditions on the optimal frequency of the power transmission and the topology of the transmission coil remain the same as if the coil was directly adjacent to the body.

Stability, Transient Response, Control, and Safety of a High-Power Electric Grid for Turboelectric Propulsion of Aircraft

NASA Technical Reports Server (NTRS)

Armstrong, Michael; Ross, Christine; Phillips, Danny; Blackwelder, Mark

2013-01-01

This document contains the deliverables for the NASA Research and Technology for Aerospace Propulsion Systems (RTAPS) regarding the stability, transient response, control, and safety study for a high power cryogenic turboelectric distributed propulsion (TeDP) system. The objective of this research effort is to enumerate, characterize, and evaluate the critical issues facing the development of the N3-X concept aircraft. This includes the proposal of electrical grid architecture concepts and an evaluation of any needs for energy storage.

Mars Science Laboratory Focused Technology Program Overview

NASA Technical Reports Server (NTRS)

Udomkesmalee, Gabriel Souraphol; Hayati, Samad A.

2005-01-01

This paper describes how the MSL-FT program functions to ensure that the needed technology is identified, developed, matured to TRL 6, and infused in the MSL mission, in a systematic fashion that will meet the mission's objectives innovatively and within budget. The paper describes the mission's technical and project challenges, and outlines the process, procedures, tools and people involved in meeting those challenges. The paper also discusses the technology certification process required to demonstrate that technology deliverables perform adequately and in a predictable fashion to successful infusion into the MSL Flight System.

Towards developing Kentucky's landscape change maps

USGS Publications Warehouse

Zourarakis, D.P.; Lambert, S.C.; Palmer, M.

2003-01-01

The Kentucky Landscape Snapshot Project, a NASA-funded project, was established to provide a first baseline land cover/land use map for Kentucky. Through this endeavor, change detection will be institutionalized, thus aiding in decision-making at the local, state, and federal planning levels. 2002 Landsat 7 imaginery was classified following and Anderson Level III scheme, providing an enhancement over the 1992 USGS National Land Cover Data Set. Also as part of the deliverables, imperviousness and canopy closure layers were produced with the aid of IKONOS high resolution, multispectral imagery.

Audio Development Laboratory (ADL) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Romero, Andy

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ADL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

4D dose calculation and delivery with interplay effects between respiratory motion and uniform scanning proton beam

NASA Astrophysics Data System (ADS)

Zhao, Qingya

2011-12-01

Proton radiotherapy has advantages to deliver accurate high conformal radiation dose to the tumor while sparing the surrounding healthy tissue and critical structures. However, the treatment effectiveness is degraded greatly due to patient free breathing during treatment delivery. Motion compensation for proton radiotherapy is especially challenging as proton beam is more sensitive to the density change along the beam path. Tumor respiratory motion during treatment delivery will affect the proton dose distribution and the selection of optimized parameters for treatment planning, which has not been fully addressed yet in the existing approaches for proton dose calculation. The purpose of this dissertation is to develop an approach for more accurate dose delivery to a moving tumor in proton radiotherapy, i.e., 4D proton dose calculation and delivery, for the uniform scanning proton beam. A three-step approach has been carried out to achieve this goal. First, a solution for the proton output factor calculation which will convert the prescribed dose to machine deliverable monitor unit for proton dose delivery has been proposed and implemented. The novel sector integration method is accurate and time saving, which considers the various beam scanning patterns and treatment field parameters, such as aperture shape, aperture size, measuring position, beam range, and beam modulation. Second, tumor respiratory motion behavior has been statistically characterized and the results have been applied to advanced image guided radiation treatment. Different statistical analysis and correlation discovery approaches have been investigated. The internal / external motion correlation patterns have been simulated, analyzed, and applied in a new hybrid gated treatment to improve the target coverage. Third, a dose calculation method has been developed for 4D proton treatment planning which integrates the interplay effects of tumor respiratory motion patterns and proton beam delivery mechanism. These three steps provide an innovative integrated framework for accurate 4D proton dose calculation and treatment planning for a moving tumor, which extends the functionalities of existing 3D planning systems. In short, this dissertation work addresses a few important problems for effective proton radiotherapy to a moving target. The outcomes of the dissertation are very useful for motion compensation with advanced image guided proton treatment.

Preliminary Airspace Operations Simulations Findings Report

NASA Technical Reports Server (NTRS)

2005-01-01

Provides preliminary findings of the initial series (normal operations and contingency management) of airspace operations simulations. The key elements of this report discuss feedback from controller subjects for UAS flight above FL430. Findings provide initial evaluation of routine UAS operations above dense ARTCC airspace (ZOB), and identify areas of further research, policy direction and procedural development. This document further serves as an addendum to the detailed AOS simulation plan (Deliverable SIM001), incorporating feedback from FAA air traffic personnel and Access 5 IPTs.

Technology Maturation in Preparation for the Cryogenic Propellant Storage and Transfer (CPST) Technology Demonstration Mission (TDM)

NASA Technical Reports Server (NTRS)

Meyer, Michael L.; Doherty, Michael P.; Moder, Jeffrey P.

2014-01-01

In support of its goal to find an innovative path for human space exploration, NASA embarked on the Cryogenic Propellant Storage and Transfer (CPST) Project, a Technology Demonstration Mission (TDM) to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large in-space cryogenic propulsion stages and propellant depots. Recognizing that key Cryogenic Fluid Management (CFM) technologies anticipated for on-orbit (flight) demonstration would benefit from additional maturation to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate (STMD) authorized funding for a one-year technology maturation phase of the CPST project. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, concept studies, and ground tests of the storage and fluid transfer of CFM technology sub-elements and components that were lower than a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. The specific technologies selected were grouped into five major categories: thick multilayer insulation, tank applied active thermal control, cryogenic fluid transfer, propellant gauging, and analytical tool development. Based on the success of the technology maturation efforts, the CPST project was approved to proceed to flight system development.

Hanford Site Beryllium Program: Past, Present, and Future - 12428

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, Mark; Garcia, Pete; Goeckner, Julie

2012-07-01

The U.S. Department of Energy (DOE) has a long history of beryllium use because of the element's broad application to many nuclear operations and processes. At the Hanford Site beryllium alloy was used to fabricate parts for reactors, including fuel rods for the N-Reactor during plutonium production. Because of continued confirmed cases of chronic beryllium disease (CBD), and data suggesting CBD occurs at exposures to low-level concentrations, the DOE decided to issue a rule to further protect federal and contractor workers from hazards associated with exposure to beryllium. When the beryllium rule was issued in 1999, each of the Hanfordmore » Site contractors developed a Chronic Beryllium Disease Prevention Program (CBDPP) and initial site wide beryllium inventories. A new site-wide CBDPP, applicable to all Hanford contractors, was issued in May, 2009. In the spring of 2010 the DOE Headquarters Office of Health, Safety, and Security (HSS) conducted an independent inspection to evaluate the status of implementation of the Hanford Site Chronic Beryllium Disease Prevention Program (CBDPP). The report identified four Findings and 12 cross-cutting Opportunities for Improvement (OFIs). A corrective action plan (CAP) was developed to address the Findings and crosscutting OFIs. The DOE directed affected site contractors to identify dedicated resources to participate in development of the CAP, along with involving stakeholders. The CAP included general and contractor-specific recommendations. Following initiation of actions to implement the approved CAP, it became apparent that additional definition of product deliverables was necessary to assure that expectations were adequately addressed and CAP actions could be closed. Consequently, a supplement to the original CAP was prepared and transmitted to DOE-HQ for approval. Development of the supplemental CAP was an eight month effort. From the onset a core group of CAP development members were identified to develop a mechanism for assuring that consensus was achieved on products developed as part of the CAP and the closure process. The original CAP was developed based on a large number of actions developed from the HSS report. This was essentially a 'bottoms up' approach. The revised CAP development team concluded that a more holistic, process-based approach was appropriate to assure that the resulting deliverable resulted in a best-in-class product. Consequently, issues and recommendations contained in the HSS report were grouped into 11 program areas, specific product deliverables were identified within each of the program areas, and a work breakdown structure (WBS) was logically applied to number the groupings. While the revised approach to product development utilizes a more holistic, 'top down' approach, the intent was still to incorporate specific recommendations and address specific issues contained in the HSS report. Through implementation of this new approach, a collaborative team has been established that works together using a consensus process for ensuring product completion. Benefits of the new approach include building a level of trust amongst all parties, quality of the products have improved, and acceptance by all parties of what action will truly meet the intent of the deficiency and make the beryllium program stronger. Open dialogue occurs amongst the core Be CAP team members, Hanford contractors, and DOE. It has been a learning process and will continue to be one, but everyone shares the common goal of reducing worker exposure to beryllium. (authors)« less

Incubation lighting schedules and their interaction with matched or mismatched post hatch lighting schedules: Effects on broiler bone development and leg health at slaughter age.

PubMed

van der Pol, Carla W; van Roovert-Reijrink, Inge A M; Aalbers, Gerald; Kemp, Bas; van den Brand, Henry

2017-10-01

The incidence of leg pathologies in broiler chickens with a developmental origin may be decreased by stimulating embryonic bone development through lighting schedules during incubation, but this may depend on post hatch lighting conditions. Aim was to investigate how lighting schedules during incubation and their interactions with matched or mismatched lighting schedules post hatch affected bone development and leg health at slaughter age. In a 3×2 factorial designed experiment, eggs were incubated under continuous cool white LED light (Inc 24L ), 16h of light, 8h of darkness (Inc 16L:8D ), or continuous darkness (Inc 24D ) from set till hatch. After hatch, broilers were housed under continuous light (PH 24L , to match Inc 24L and Inc 24D ) or 16h of light, 8h of darkness (PH 16L:8D , to match Inc 16L:8D ). Gait scores were determined on D21, D28, and D34. After slaughter on D35, legs were scored for varus-valgus deformities, rotated tibia, tibial dyschondroplasia, bacterial chondronecrosis with osteomyelitis (BCO), epiphyseolysis, and epiphyseal plate abnormalities from 1=absent to 4=severe. Femur and tibia dimensions and mineral density were determined. Inc 24L led to more epiphyseal plate abnormalities than Inc 16L:8D or Inc 24D . Inc 24D led to more BCO than Inc 16L:8D . Gait scores on D21, D28, and D34, and bone dimensions did not differ between treatments. Inc 24L led to higher femur mineral density than Inc 24D with Inc 16L:8D intermediate. Providing a chicken with a matched post hatch lighting schedule did not affect most measurements of bone development and health. It can be concluded that a circadian incubation lighting schedule may improve leg health in broilers. Copyright © 2017 Elsevier Ltd. All rights reserved.

48 CFR 223.7303 - Prohibition.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Hexavalent Chromium 223.7303 Prohibition. (a) Except as provided in 223.7304 and 223.7305, no contract may... than 0.1 percent hexavalent chromium by weight in any homogeneous material in the deliverable or...

Colorimetric detection for paper-based biosensing applications

NASA Astrophysics Data System (ADS)

Brink, C.; Joubert, T.-H.

2016-02-01

Research on affordable point-of-care health diagnostics is rapidly advancing1. Colorimetric biosensor applications are typically qualitative, but recently the focus has been shifted to quantitative measurements2,3. Although numerous qualitative point-of-care (POC) health diagnostic devices are available, the challenge exists of developing a quantitative colorimetric array reader system that complies with the ASSURED (Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment-free, Deliverable to end-users) principles of the World Health Organization4. This paper presents a battery powered 8-bit tonal resolution colorimetric sensor circuit for paper microfluidic assays using low cost photo-detection circuitry and a low-power LED light source. A colorimetric 3×3-pixel array reader was developed for rural environments where resources and personnel are limited. The device sports an ultralow-power E-ink paper display. The colorimetric device includes integrated GPS functionality and EEPROM memory to log measurements with geo-tags for possible analysis of regional trends. The device competes with colour intensity measurement techniques using smartphone cameras, but proves to be a cheaper solution, compensating for the typical performance variations between cameras of different brands of smartphones. Inexpensive methods for quantifying bacterial assays have been shown using desktop scanners, which are not portable, and cameras, which suffer severely from changes in ambient light in different environments. Promising colorimetric detection results have been demonstrated using devices such as video cameras5, digital colour analysers6, flatbed scanners7 or custom portable readers8. The major drawback of most of these methods is the need for specialized instrumentation and for image analysis on a computer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, Brian David; Houchins, Cassidy; Huya-Kouadio, Jennie Moton

The Fuel Cell Technologies Office (FCTO) has identified hydrogen storage as a key enabling technology for advancing hydrogen and fuel cell power technologies in transportation, stationary, and portable applications. Consequently, FCTO has established targets to chart the progress of developing and demonstrating viable hydrogen storage technologies for transportation and stationary applications. This cost assessment project supports the overall FCTO goals by identifying the current technology system components, performance levels, and manufacturing/assembly techniques most likely to lead to the lowest system storage cost. Furthermore, the project forecasts the cost of these systems at a variety of annual manufacturing rates to allowmore » comparison to the overall 2017 and “Ultimate” DOE cost targets. The cost breakdown of the system components and manufacturing steps can then be used to guide future research and development (R&D) decisions. The project was led by Strategic Analysis Inc. (SA) and aided by Rajesh Ahluwalia and Thanh Hua from Argonne National Laboratory (ANL) and Lin Simpson at the National Renewable Energy Laboratory (NREL). Since SA coordinated the project activities of all three organizations, this report includes a technical description of all project activity. This report represents a summary of contract activities and findings under SA’s five year contract to the US Department of Energy (Award No. DE-EE0005253) and constitutes the “Final Scientific Report” deliverable. Project publications and presentations are listed in the Appendix.« less

An Essential Physiological Role for MCT8 in Bone in Male Mice

PubMed Central

Leitch, Victoria D.; Di Cosmo, Caterina; Liao, Xiao-Hui; O’Boy, Sam; Galliford, Thomas M.; Evans, Holly; Croucher, Peter I.; Boyde, Alan; Dumitrescu, Alexandra; Weiss, Roy E.; Refetoff, Samuel; Williams, Graham R.

2017-01-01

T3 is an important regulator of skeletal development and adult bone maintenance. Thyroid hormone action requires efficient transport of T4 and T3 into target cells. We hypothesized that monocarboxylate transporter (MCT) 8, encoded by Mct8 on the X-chromosome, is an essential thyroid hormone transporter in bone. To test this hypothesis, we determined the juvenile and adult skeletal phenotypes of male Mct8 knockout mice (Mct8KO) and Mct8D1D2KO compound mutants, which additionally lack the ability to convert the prohormone T4 to the active hormone T3. Prenatal skeletal development was normal in both Mct8KO and Mct8D1D2KO mice, whereas postnatal endochondral ossification and linear growth were delayed in both Mct8KO and Mct8D1D2KO mice. Furthermore, bone mass and mineralization were decreased in adult Mct8KO and Mct8D1D2KO mice, and compound mutants also had reduced bone strength. Delayed bone development and maturation in Mct8KO and Mct8D1D2KO mice is consistent with decreased thyroid hormone action in growth plate chondrocytes despite elevated serum T3 concentrations, whereas low bone mass and osteoporosis reflects increased thyroid hormone action in adult bone due to elevated systemic T3 levels. These studies identify an essential physiological requirement for MCT8 in chondrocytes, and demonstrate a role for additional transporters in other skeletal cells during adult bone maintenance. PMID:28637283

Artificial intelligence applications in logistics information systems : final report

DOT National Transportation Integrated Search

1990-04-01

This report is the principal deliverable from the LIMSS-AI project. It summarizes the results of a survey of existing applications and discusses the feasibility and benefits of specific candidate logistics applications.

Appendix 4 : listing of deliverables.

DOT National Transportation Integrated Search

2004-07-01

In 1994, the U.S. Department of Transportation (DOT) and Mexicos Secretariat of Communications and Transportation (Secretara de Comunicaciones y Transportes (SCT)) signed a Memorandum of Understanding (MOU) outlining the creation of the Joint Wo...

Anomalous D-Log E curve with high contrast developer Kodak D8 on ultra fine grain emulsion BB640.

PubMed

Ulibarrena, M; Mendez, M; Blaya, S; Fimia, A

2001-12-03

D-Log E curves, also known as H-D curves, are used since the XIX century as a tool for describing the characteristics of silver halide emulsions. This curve has a very standard shape, with a linear region, a toe, a shoulder and a solarization region. In this work we present a distortion of the usual curve due to the action of a high contrast developer, Kodak D8, on an ultra fine grain emulsion, BB640\\cite{ov04}. The solarization effect is replaced by a linear zone where developed densities increase with increasing exposures, until all silver halide present in the emulsion is reduced by developer D8 to metallic silver. Densities higher than 11 have been obtained.

20 CFR 638.809 - Audit.

Code of Federal Regulations, 2011 CFR

2011-04-01

... duly authorized representatives, shall have access to any books, documents, papers, and records of the... Corps deliverers, or their subcontractors using Federal auditors or independent public accountants. Such...

20 CFR 638.809 - Audit.

Code of Federal Regulations, 2012 CFR

2012-04-01

... duly authorized representatives, shall have access to any books, documents, papers, and records of the... Corps deliverers, or their subcontractors using Federal auditors or independent public accountants. Such...

Evaluation of Aeroservoelastic Effects on Flutter

NASA Technical Reports Server (NTRS)

Nagaraja, K. S.; Felt, Larry R.; Kraft, Raymond

1998-01-01

This report presents work performed by The Boeing Company to satisfy the deliverable "Evaluation of aeroservoelastic Effects on Symmetric Flutter" for Subtask 7 of Reference 1. The objective of this report is to incorporate the improved methods for studying the effects of a closed-loop control system on the aeroservoelastic behavior of the airplane planned under NASA HSR technical Integration Task 20 work. Also, a preliminary evaluation of the existing pitch control laws on symmetric flutter of the TCA configuration was addressed."The goal is to develop an improved modeling methodology and perform design studies that account for the aero-structures-systems interaction effects.

Learn about effective collaboration processes, tools and outcomes for science education professionals and scientists: NASA's Heliophysics Science Education and Public Outreach Forum

NASA Astrophysics Data System (ADS)

Peticolas, L. M.; Bartolone, L. M.; Cobabe-Ammann, E. A.; Paglierani, R.; Mendez, B. J.; Nichols, M.; Davis, H.; Ali, N. A.

2012-12-01

NASA has funded four Science Education and Public Outreach Forums (SEPOFs) that work closely with NASA's Science Mission Directorate (SMD) and with each other to support and coordinate NASA's science education and public outreach activities. The Heliophysics E/PO Forum is one of these forums. The currently funded program has been operating for 3 years. The work of the Heliophysics E/PO Forum has resulted in several deliverables. 1) We have continued and further developed a 'community of practice' for Heliophysics E/PO professionals, which includes an on-line workspace for the heliophysics community (and other NASA SEPOF communities), monthly features of Heliophysics educational programs and products and the people who run the programs and develop the products, monthly tag-ups for Heliophysics E/PO professionals funded by NASA, an annual 'internal' workshop for this community, professional development opportunities, a structure for reporting information to NASA, and a weekly newsletter; 2) We have created tools for scientists interested in doing education and public outreach; 3) We have created workshops for faculty teaching Heliophysics topics; 4) We have analyzed heliophysics educational products in order to classify them both for 'gap analysis' as well as for use in a digital catalogue of science educational resources; and 5) We have worked on several cross-forum initiatives including professional development opportunities, working groups, a digital library of science educational resources, reporting support for NASA SMD, and the on-line workspace infrastructure and design. We present evaluation data on the impact of these deliverables in meeting our goals and objectives specifically for the Heliophysics E/PO Forum. We also discuss our perspectives on the benefits of working closely with the other NASA science E/PO Forums. We share how the Heliophysics E/PO Forum can benefit scientists in their E/PO efforts as well.

Identification of mitochondrial DNA sequence variation and development of single nucleotide polymorphic markers for CMS-D8 in cotton.

PubMed

Suzuki, Hideaki; Yu, Jiwen; Wang, Fei; Zhang, Jinfa

2013-06-01

Cytoplasmic male sterility (CMS), which is a maternally inherited trait and controlled by novel chimeric genes in the mitochondrial genome, plays a pivotal role in the production of hybrid seed. In cotton, no PCR-based marker has been developed to discriminate CMS-D8 (from Gossypium trilobum) from its normal Upland cotton (AD1, Gossypium hirsutum) cytoplasm. The objective of the current study was to develop PCR-based single nucleotide polymorphic (SNP) markers from mitochondrial genes for the CMS-D8 cytoplasm. DNA sequence variation in mitochondrial genes involved in the oxidative phosphorylation chain including ATP synthase subunit 1, 4, 6, 8 and 9, and cytochrome c oxidase 1, 2 and 3 subunits were identified by comparing CMS-D8, its isogenic maintainer and restorer lines on the same nuclear genetic background. An allelic specific PCR (AS-PCR) was utilized for SNP typing by incorporating artificial mismatched nucleotides into the third or fourth base from the 3' terminus in both the specific and nonspecific primers. The result indicated that the method modifying allele-specific primers was successful in obtaining eight SNP markers out of eight SNPs using eight primer pairs to discriminate two alleles between AD1 and CMS-D8 cytoplasms. Two of the SNPs for atp1 and cox1 could also be used in combination to discriminate between CMS-D8 and CMS-D2 cytoplasms. Additionally, a PCR-based marker from a nine nucleotide insertion-deletion (InDel) sequence (AATTGTTTT) at the 59-67 bp positions from the start codon of atp6, which is present in the CMS and restorer lines with the D8 cytoplasm but absent in the maintainer line with the AD1 cytoplasm, was also developed. A SNP marker for two nucleotide substitutions (AA in AD1 cytoplasm to CT in CMS-D8 cytoplasm) in the intron (1,506 bp) of cox2 gene was also developed. These PCR-based SNP markers should be useful in discriminating CMS-D8 and AD1 cytoplasms, or those with CMS-D2 cytoplasm as a rapid, simple, inexpensive, and reliable genotyping tool to assist hybrid cotton breeding.

MO-FG-BRA-08: Swarm Intelligence-Based Personalized Respiratory Gating in Lung SAbR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Modiri, A; Sabouri, P; Sawant, A

Purpose: Respiratory gating is widely deployed as a clinical motion-management strategy in lung radiotherapy. In conventional gating, the beam is turned on during a pre-determined phase window; typically, around end-exhalation. In this work, we challenge the notion that end-exhalation is always the optimal gating phase. Specifically, we use a swarm-intelligence-based, inverse planning approach to determine the optimal respiratory phase and MU for each beam with respect to (i) the state of the anatomy at each phase and (ii) the time spent in that state, estimated from long-term monitoring of the patient’s breathing motion. Methods: In a retrospective study of fivemore » lung cancer patients, we compared the dosimetric performance of our proposed personalized gating (PG) with that of conventional end-of-exhale gating (CEG) and a previously-developed, fully 4D-optimized plan (combined with MLC tracking delivery). For each patient, respiratory phase probabilities (indicative of the time duration of the phase) were estimated over 2 minutes from lung tumor motion traces recorded previously using the Synchrony system (Accuray Inc.). Based on this information, inverse planning optimization was performed to calculate the optimal respiratory gating phase and MU for each beam. To ensure practical deliverability, each PG beam was constrained to deliver the assigned MU over a time duration comparable to that of CEG delivery. Results: Maximum OAR sparing for the five patients achieved by the PG and the 4D plans compared to CEG plans was: Esophagus Dmax [PG:57%, 4D:37%], Heart Dmax [PG:71%, 4D:87%], Spinal cord Dmax [PG:18%, 4D:68%] and Lung V13 [PG:16%, 4D:31%]. While patients spent the most time in exhalation, the PG-optimization chose end-exhale only for 28% of beams. Conclusion: Our novel gating strategy achieved significant dosimetric improvements over conventional gating, and approached the upper limit represented by fully 4D optimized planning while being significantly simpler and more clinically translatable. This work was partially supported through research funding from National Institutes of Health (R01CA169102) and Varian Medical Systems, Palo Alto, CA, USA.« less

Comparative Packaging Study

NASA Technical Reports Server (NTRS)

Perchonok, Michele; Antonini, David

2008-01-01

This viewgraph presentation describes a comparative packaging study for use on long duration space missions. The topics include: 1) Purpose; 2) Deliverables; 3) Food Sample Selection; 4) Experimental Design Matrix; 5) Permeation Rate Comparison; and 6) Packaging Material Information.

Observations, Ideas, and Opinions: Systems Engineering and Integration for Return to Flight

NASA Technical Reports Server (NTRS)

Gafka, George K.

2006-01-01

This presentation addresses project management and systems engineering and integration challenges for return to flight, focusing on the Thermal Protection System Tile Repair Project (TRP). The program documentation philosophy, communication with program requirements flow and philosophy and planned deliverables and documentation are outlined. The development of TRP 'use-as-is' analytical tools is also highlighted and emphasis is placed on the use flight history to assess pre-flight and real-time risk. Additionally, an overview is provided of the repair procedure, including an outline of the logistics deployment chart.

Cartridge output testing - Methods to overcome closed-bomb shortcomings

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Schimmel, Morry L.

1991-01-01

Although the closed-bomb test has achieved virtually universal acceptance for measuring the output performance of pyrotechnic cartridges, there are serious shortcomings in its ability to quantify the performance of cartridges used as energy sources for pyrotechnic-activated mechanical devices. This paper presents several examples of cartridges (including the NASA Standard Initiator NSI) that successfully met closed-bomb performance requirements, but resulted in functional failures in mechanisms. To resolve these failures, test methods were developed to demonstrate a functional margin, based on comparing energy required to accomplish the function to energy deliverable by the cartridge.

Manufacturing Planning Guide

NASA Technical Reports Server (NTRS)

Waid, Michael

2011-01-01

Manufacturing process, milestones and inputs are unknowns to first-time users of the manufacturing facilities. The Manufacturing Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their project engineering personnel in manufacturing planning and execution. Material covered includes a roadmap of the manufacturing process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Feasibility study on the modernization and expansion of the Tema Oil Refinery: Final report. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

The study was undertaken in order to serve the Ministry of Energy of Ghana under the terms of the contract with respect to deliverables, cost and schedule. The objectives of the study were: to evaluate the ability of the proposed refinery configuration to meet the demands for petroleum products through the year 2005; to demonstrate sound economics in order to attract financing from leading international agencies such as the World Bank, African Development Bank and Export-Import Bank; and to serve as a basis for meaningful future work by the Ministry.

Shuttle orbiter Ku-band radar/communications system design evaluation

NASA Technical Reports Server (NTRS)

Dodds, J.; Holmes, J.; Huth, G. K.; Iwasaki, R.; Maronde, R.; Polydoros, A.; Weber, C.; Broad, P.

1980-01-01

Tasks performed in an examination and critique of a Ku-band radar communications system for the shuttle orbiter are reported. Topics cover: (1) Ku-band high gain antenna/widebeam horn design evaluation; (2) evaluation of the Ku-band SPA and EA-1 LRU software; (3) system test evaluation; (4) critical design review and development test evaluation; (5) Ku-band bent pipe channel performance evaluation; (6) Ku-band LRU interchangeability analysis; and (7) deliverable test equipment evaluation. Where discrepancies were found, modifications and improvements to the Ku-band system and the associated test procedures are suggested.

Increasing Research Productivity and Professional Development in Psychology With a Writing Retreat.

PubMed

Stanley, Ian H; Hom, Melanie A; Chu, Carol; Joiner, Thomas E

2017-09-01

Writing is a core feature of the training requirements and career demands of psychology faculty members and graduate students. Within academic psychology, specifically, writing is vital for the generation of scientific knowledge through manuscripts and grant applications. Although resources exist regarding how to improve one's writing skills, few models have been described regarding how to promote a culture of writing productivity that realizes tangible deliverables, such as manuscripts and grant applications. In this article, we discuss the rationale, model, and initial outcome data of a writing retreat developed and implemented to increase research productivity among psychology faculty and trainees. We also review best practices for conducting writing retreats and identify key areas for future SoTL on advancing writing.

European network for Health Technology Assessment Joint Action (EUnetHTA JA): a process evaluation performed by questionnaires and documentary analysis.

PubMed

Woodford Guegan, Eleanor; Cook, Andrew

2014-06-01

The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health Technology Assessment Joint Action 2 (EUnetHTA JA2). Most work packages produced their planned deliverables. Networking emerged as one of the main benefits of the project and face-to-face meetings were important. However, the overarching objective did not appear to have been met because there will be a follow-up EUnetHTA JA2 project (reliant on project funding) before the establishment of any permanent network. Twelve organisations from three continents participated in the Delphi exercise to develop the data set. It was demonstrated that a registry for matching pragmatic clinical studies under consideration by funders could be built on a very small data set. This would include 10 unique items, of which five are required to describe a study and the rest are metadata. In the test sample the data set with an appropriate matching rule was able to deliver a sensitivity of between 50% and 100% and a specificity of between 43% and 86% for matching different elements. A number of recommendations have been made for the next EUnetHTA JA2 project and its evaluation. This included that the evaluation of the EUnetHTA JA2 project should extend beyond the end of the project to allow assessment of its impact; that the quality, usability and cost-effectiveness of tools in 'real-world HTA practice' should be assessed and tangible benefits of international networking should be evaluated. It is worth proceeding to develop a database registry aimed at identifying trials in development based on the data set developed. The study was funded by the National Institute for Health Research Health Technology Assessment programme (50%) and the European Union Commission (50%).

European network for Health Technology Assessment Joint Action (EUnetHTA JA): a process evaluation performed by questionnaires and documentary analysis.

PubMed Central

Woodford Guegan, Eleanor; Cook, Andrew

2014-01-01

BACKGROUND The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. METHODS Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. RESULTS AND DISCUSSION High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health Technology Assessment Joint Action 2 (EUnetHTA JA2). Most work packages produced their planned deliverables. Networking emerged as one of the main benefits of the project and face-to-face meetings were important. However, the overarching objective did not appear to have been met because there will be a follow-up EUnetHTA JA2 project (reliant on project funding) before the establishment of any permanent network. Twelve organisations from three continents participated in the Delphi exercise to develop the data set. It was demonstrated that a registry for matching pragmatic clinical studies under consideration by funders could be built on a very small data set. This would include 10 unique items, of which five are required to describe a study and the rest are metadata. In the test sample the data set with an appropriate matching rule was able to deliver a sensitivity of between 50% and 100% and a specificity of between 43% and 86% for matching different elements. CONCLUSIONS A number of recommendations have been made for the next EUnetHTA JA2 project and its evaluation. This included that the evaluation of the EUnetHTA JA2 project should extend beyond the end of the project to allow assessment of its impact; that the quality, usability and cost-effectiveness of tools in 'real-world HTA practice' should be assessed and tangible benefits of international networking should be evaluated. It is worth proceeding to develop a database registry aimed at identifying trials in development based on the data set developed. FUNDING The study was funded by the National Institute for Health Research Health Technology Assessment programme (50%) and the European Union Commission (50%). PMID:24913263

Ionic Liquid Hybrid Electrolytes for Lithium-Ion Batteries: A Key Role of the Separator-Electrolyte Interface in Battery Electrochemistry.

PubMed

Huie, Matthew M; DiLeo, Roberta A; Marschilok, Amy C; Takeuchi, Kenneth J; Takeuchi, Esther S

2015-06-10

Batteries are multicomponent systems where the theoretical voltage and stoichiometric electron transfer are defined by the electrochemically active anode and cathode materials. While the electrolyte may not be considered in stoichiometric electron-transfer calculations, it can be a critical factor determining the deliverable energy content of a battery, depending also on the use conditions. The development of ionic liquid (IL)-based electrolytes has been a research area of recent reports by other researchers, due, in part, to opportunities for an expanded high-voltage operating window and improved safety through the reduction of flammable solvent content. The study reported here encompasses a systematic investigation of the physical properties of IL-based hybrid electrolytes including quantitative characterization of the electrolyte-separator interface via contact-angle measurements. An inverse trend in the conductivity and wetting properties was observed for a series of IL-based electrolyte candidates. Test-cell measurements were undertaken to evaluate the electrolyte performance in the presence of functioning anode and cathode materials, where several promising IL-based hybrid electrolytes with performance comparable to that of conventional carbonate electrolytes were identified. The study revealed that the contact angle influenced the performance more significantly than the conductivity because the cells containing IL-tetrafluoroborate-based electrolytes with higher conductivity but poorer wetting showed significantly decreased performance relative to the cells containing IL-bis(trifluoromethanesulfonyl)imide electrolytes with lower conductivity but improved wetting properties. This work contributes to the development of new IL battery-based electrolyte systems with the potential to improve the deliverable energy content as well as safety of lithium-ion battery systems.

The integration of system specifications and program coding

NASA Technical Reports Server (NTRS)

Luebke, W. R.

1970-01-01

Experience in maintaining up-to-date documentation for one module of the large-scale Medical Literature Analysis and Retrieval System 2 (MEDLARS 2) is described. Several innovative techniques were explored in the development of this system's data management environment, particularly those that use PL/I as an automatic documenter. The PL/I data description section can provide automatic documentation by means of a master description of data elements that has long and highly meaningful mnemonic names and a formalized technique for the production of descriptive commentary. The techniques discussed are practical methods that employ the computer during system development in a manner that assists system implementation, provides interim documentation for customer review, and satisfies some of the deliverable documentation requirements.

IMPLEMENTING PRACTICAL PICO-HYDROPOWER

EPA Science Inventory

Deliverables for this proposal will be energy output data modeled from experimental testing of the hydropower unit and monitoring of the stormwater handling infrastructure in the GIS building; along with a design and engineering plan for implementation and building integrat...

Strategies for improving transportation project delivery performance.

DOT National Transportation Integrated Search

2016-09-01

project delivery performance for the various contracting methods that are : applicable for CTDOTs use. The report is structured in two parts. Part A covers overall : project deliverability and Part B is focused on environmental review processes an...

Hydrogeologic map of the Islamic Republic of Mauritania (phase V, deliverable 56), Synthesis of hydrologic data (phase V, deliverable 57), and chemical hydrologic map of the Islamic Republic of Mauritania (added value): Chapter C in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Friedel, Michael J.; Finn, Carol A.; Horton, John D.

2015-01-01

A hydrogeologic study was conducted to support mineral-resource assessment activities in Mauritania, Africa. Airborne magnetic depth estimates reveal two primary groundwater basins: the porous coastal Continental Terminal Basin (fill deposits); and the interior, fractured interior Taoudeni Basin. In the Continental Terminal Basin, there is uniform vertical recharge and localized discharge that is coincident with groundwater pumping at Nouakchott. This pumping center induces eastward flow of groundwater from the Atlantic Ocean resulting in a salinity gradient that diminishes quality over 100 km. Groundwater also flows southward into the basin from Western Sahara. By contrast, an interbasin exchange occurs as fresh groundwater flows westward from the Taoudeni Basin. In the Taoudeni Basin, zones of local recharge occur in three areas: northwest at the edge of the Rgueïbat Shield; at the city of Tidjikja; and near the center of the basin. Groundwater also flows across international boundaries: northward into Western Sahara and westward into Mali. At the southern country boundary, the Senegal River serves as both a source and sink of fresh groundwater to the Continental Terminal and Taoudeni basins. Using a geographical information system, thirteen hydrogeologic units are identified based on lateral extent and distinct hydraulic properties for future groundwater model development. Combining this information with drilling productivity, groundwaterquality, and geophysical interpretations (fracturing and absence of subsurface dikes) three potential water-resource development targets were identified: sedimentary rocks of the Jurassic, Cretaceous, and Quaternary Periods; sedimentary rocks of Cambrian and Ordovician Periods; and sedimentary rocks of Neoproterozoic age.

Evaluating topologically diverse metal–organic frameworks for cryo-adsorbed hydrogen storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gómez-Gualdrón, Diego A.; Colón, Yamil J.; Zhang, Xu

Metal–organic frameworks (MOFs) are porous materials synthesized by combining inorganic and organic molecular building blocks into crystalline networks of distinct topologies. Due to the combinatorial possibilities, there are millions of possible MOF structures. Aiming to exploit their exceptional tunability, surface areas and pore volumes, researchers have investigated MOFs for storage of gaseous fuels such as hydrogen for over a decade, but a suitable MOF to store hydrogen at ambient conditions has not yet been found. Here, we sought to rapidly determine the viability of using MOFs for hydrogen storage at recently proposed, cryogenic operating conditions. We constructed a large andmore » structurally diverse set of 13 512 potential MOF structures based on 41 different topologies and used molecular simulation to determine MOF hydrogen deliverable capacities between 100 bar/77 K and 5 bar/160 K. The highest volumetric deliverable capacity was 57 g L-1 of MOF, which surpasses the 37 g L-1 of tank of the incumbent technology (compressing hydrogen to 700 bar at ambient temperature). To validate our in silico MOF construction method, we synthesized a new isoreticular family of MOFs (she-MOF-x series) based on the she topology, which is extremely rare among MOFs. To validate our hydrogen storage predictions, we activated and measured hydrogen adsorption on she-MOF-1 and NU-1103. The latter MOF showed outstanding stability and a good combination of volumetric and gravimetric performance, presenting 43.2 g L-1 of MOF and 12.6 wt% volumetric and gravimetric deliverable capacities, respectively.« less

WINCADRE (COMPUTER-AIDED DATA REVIEW AND EVALUATION)

EPA Science Inventory

WinCADRE (Computer-Aided Data Review and Evaluation) is a Windows -based program designed for computer-assisted data validation. WinCADRE is a powerful tool which significantly decreases data validation turnaround time. The electronic-data-deliverable format has been designed ...

Improving the driving practices of pizza deliverers: Response generalization and moderating effects of driving history

PubMed Central

Ludwig, Timothy D.; Geller, E. Scott

1991-01-01

A practical intervention program, targeting the safety belt use of pizza deliverers at two stores, increased significantly the use of both safety belts (143% above baseline) and turn signals (25% above baseline). Control subjects (i.e., pizza deliverers at a third no-intervention store and patrons driving to the pizza stores) showed no changes in belt or turn signal use over the course of 7-month study. The intervention program was staggered across two pizza stores and consisted of a group meeting wherein employees discussed the value of safety belts, received feedback regarding their low safety belt use, offered suggestions for increasing their belt use, and made a personal commitment to buckle up by signing buckle-up promise cards. Subsequently, employee-designed buckle-up reminder signs were placed in the pizza stores. By linking license plate numbers to individual driving records, we examined certain aspects of driving history as moderators of pre- and postintervention belt use. Although baseline belt use was significantly lower for drivers with one or more driving demerits or accidents in the previous 5 years, after the intervention these risk groups increased their belt use significantly and at the same rate as drivers with no demerits or accidents. Whereas baseline belt use was similar for younger (under 25) and older (25 or older) drivers, younger drivers were markedly more influenced by the intervention than were older drivers. Individual variation in belt use during baseline, intervention, and follow-up phases indicated that some drivers require more effective and costly intervention programs to motivate their safe driving practices. PMID:16795743

Highway project cost estimating and management.

DOT National Transportation Integrated Search

2009-02-01

"This report provides detailed information about the project objectives, deliverables, and findings. The project team : thoroughly reviewed the Montana Department of Transportation (MDT) structure, operations, and current procedures as : related to M...

Cold Vacuum Drying (CVD) Facility Acceptance for Beneficial Use

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRISBIN, S.A.

2000-01-05

This document provides a checklist of the items required for turnover of the Cold Vacuum Drying Facility from the Construction Projects organization to the Operations organization. This document will be updated periodically to document completion of additional deliverables.

Environmental Response Laboratory Network (ERLN) WebEDR Quick Reference Guide

EPA Pesticide Factsheets

The Web Electronic Data Review is a web-based system that performs automated data processing on laboratory-submitted Electronic Data Deliverables (EDDs). Enables users to perform technical audits on data, and against Measurement Quality Objectives (MQOs).

ITS Texas/Texite, Architecture Feedback Forum

DOT National Transportation Integrated Search

1995-05-11

THIS MEETING WAS A FOLLOW-UP TO ITS TEXAS'/TEXITE'S ARCHITECTURE STAKEHOLDER WORKSHOP THAT WAS HELD IN RICHARDSON, TX ON MARCH 30. AT THAT WORKSHOP, THE ARCHITECTURE TEAMS (ROCKWELL AND LORAL) HAD INDICATED THAT THEY WERE FACING MAJOR DELIVERABLES ON...

National Radiation Hardness Assurance (RHA) Planning For NASA Missions: Updated Guidance

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Pellish, Jonathan Allen

2014-01-01

Radiation Hardness Assurance (RHA) is the process of ensuring space system performance in the presence of a space radiation environment. Herein, we present an updated NASA methodology for RHA focusing on content, deliverables and timeframes.

Notional Radiation Hardness Assurance (RHA) Planning For NASA Missions: Updated Guidance

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Pellish, Jonathan A.

2014-01-01

Radiation Hardness Assurance (RHA) is the process of ensuring space system performance in the presence of a space radiation environment. Herein, we present an updated NASA methodology for RHA focusing on content, deliverables and timeframes.

Assessment of Offshore Wind System Design, Safety, and Operation Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sirnivas, Senu; Musial, Walt; Bailey, Bruce

This report is a deliverable for a project sponsored by the U.S. Department of Energy (DOE) entitled National Offshore Wind Energy Resource and Design Data Campaign -- Analysis and Collaboration (contract number DE-EE0005372; prime contractor -- AWS Truepower). The project objective is to supplement, facilitate, and enhance ongoing multiagency efforts to develop an integrated national offshore wind energy data network. The results of this initiative are intended to 1) produce a comprehensive definition of relevant met-ocean resource assets and needs and design standards, and 2) provide a basis for recommendations for meeting offshore wind energy industry data and design certificationmore » requirements.« less

AMIGAS: Building a Cervical Cancer Screening Intervention for Public Health Practice

PubMed Central

Smith, Judith Lee; Wilson, Katherine M.; Orians, Carlyn E.; Byrd, Theresa L.

2015-01-01

Background Many barriers to cervical cancer screening for Hispanic women have been documented, but few effective interventions exist. The Community Preventive Services Task Force recommends increasing cervical cancer screening through various methods. Building on this evidence, the Centers for Disease Control and Prevention funded the research and testing phases for an evidence-based and theoretically grounded intervention designed to increase cervical cancer screening among never and rarely screened Hispanic women of Mexican descent. In this article, we describe the development process of the AMIGAS (Ayudando a las Mujeres con Información, Guía, y Amor para su Salud) intervention, highlight the integration of scientific evidence and community-based participatory research principles, and identify opportunities for dissemination, adaptation, and implementation of this intervention. Methods The AMIGAS team was a collaboration among researchers, promotoras (community health workers), and program administrators. The multiyear, multiphase project was conducted in Houston, Texas; El Paso, Texas; and Yakima, Washington. The team completed several rounds of formative research, designed intervention materials and methodology, conducted a randomized controlled trial, created a guide for program administrators, and developed an intervention dissemination plan. Results Trial results demonstrated that AMIGAS was successful in increasing cervical cancer screening among Hispanic women. Adaptation of AMIGAS showed minimal reduction of outcomes. Dissemination efforts are underway to make AMIGAS available in a downloadable format via the Internet. Conclusions Developing a community-based intervention that is evidence-based and theoretically grounded is challenging, time-intensive, and requires collaboration among multiple disciplines. Inclusion of key stakeholders—in particular program deliverers and administrators—and planning for dissemination and translation to practice are integral components of successful intervention design. By providing explicit directions for adaptation for program deliverers, relevant information for program administrators, and access to the intervention via the Internet, AMIGAS is available to help increase cervical cancer screening among Hispanic women and other women disproportionately affected by cervical cancer. PMID:23930983

A model of systems integration to facilitate ITS deployment : FAST-TRAC phase IV deliverable

DOT National Transportation Integrated Search

2003-04-01

The FAST-TRAC (Faster and Safer Travel through Traffic Routing and Advanced Controls) Intelligent Transportation Systems (ITS) Field Test in Oakland County, an urbanized county in metropolitan Detroit, represents a large and successful systems integr...

Advanced technology needs for a global change science program: Perspective of the Langley Research Center

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Swissler, Thomas J.

1991-01-01

The focus of the NASA program in remote sensing is primarily the Earth system science and the monitoring of the Earth global changes. One of NASA's roles is the identification and development of advanced sensing techniques, operational spacecraft, and the many supporting technologies necessary to meet the stringent science requirements. Langley Research Center has identified the elements of its current and proposed advanced technology development program that are relevant to global change science according to three categories: sensors, spacecraft, and information system technologies. These technology proposals are presented as one-page synopses covering scope, objective, approach, readiness timeline, deliverables, and estimated funding. In addition, the global change science requirements and their measurement histories are briefly discussed.

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

NASA Technical Reports Server (NTRS)

New, S. R.

1981-01-01

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

NASA Astrophysics Data System (ADS)

New, S. R.

1981-06-01

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

The role of mitochondrial DNA damage at skeletal muscle oxidative stress on the development of type 2 diabetes.

PubMed

Dos Santos, Julia Matzenbacher; de Oliveira, Denise Silva; Moreli, Marcos Lazaro; Benite-Ribeiro, Sandra Aparecida

2018-04-20

Reduced cellular response to insulin in skeletal muscle is one of the major components of the development of type 2 diabetes (T2D). Mitochondrial dysfunction involves in the accumulation of toxic reactive oxygen species (ROS) that leads to insulin resistance. The aim of this study was to verify the involvement of mitochondrial DNA damage at ROS generation in skeletal muscle during development of T2D. Wistar rats were fed a diet containing 60% fat over 8 weeks and at day 14 a single injection of STZ (25 mg/kg) was administered (T2D-induced). Control rats received standard food and an injection of citrate buffer. Blood and soleus muscle were collected. Abdominal fat was quantified as well as glucose, triglyceride, LDL, HDL, and total cholesterol in plasma and mtDNA copy number, cytochrome b (cytb) mRNA, 8-hydroxyguanosine, and 8-isoprostane (a marker of ROS) in soleus muscle. T2D-induced animal presented similar characteristics to humans that develop T2D such as changes in blood glucose, abdominal fat, LDL, HDL and cholesterol total. In soleus muscle 8-isoprostane, mtDNA copy number and 8-hydroxyguanosine were increased, while cytb mRNA was decreased in T2D. Our results suggest that in the development of T2D, when risks factors of T2D are present, intracellular oxidative stress increases in skeletal muscle and is associated with a decrease in cytb transcription. To overcome this process mtDNA increased but due to the proximity of ROS generation, mtDNA remains damaged by oxidation leading to an increase in ROS in a vicious cycle accounting to the development of insulin resistance and further T2D.

ERLN WebEDR Fact Sheet

EPA Pesticide Factsheets

The Web-based Electronic Data Review (WebEDR) application performs automated data evaluation on ERLN electronic data deliverables (EDDs). It uses test derived from the National Functional Guidelines combined with method-defined limits to measure data.

NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

NASA Technical Reports Server (NTRS)

Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

2010-01-01

Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

Integrated Imaging Approaches Supporting the Excavation Activities. Multi-Scale Geospatial Documentation in Hierapolis (tk)

NASA Astrophysics Data System (ADS)

Spanò, A.; Chiabrando, F.; Sammartano, G.; Teppati Losè, L.

2018-05-01

The paper focuses on the exploration of the suitability and the discretization of applicability issues about advanced surveying integrated techniques, mainly based on image-based approaches compared and integrated to range-based ones that have been developed with the use of the cutting-edge solutions tested on field. The investigated techniques integrate both technological devices for 3D data acquisition and thus editing and management systems to handle metric models and multi-dimensional data in a geospatial perspective, in order to innovate and speed up the extraction of information during the archaeological excavation activities. These factors, have been experienced in the outstanding site of the Hierapolis of Phrygia ancient city (Turkey), downstream the 2017 surveying missions, in order to produce high-scale metric deliverables in terms of high-detailed Digital Surface Models (DSM), 3D continuous surface models and high-resolution orthoimages products. In particular, the potentialities in the use of UAV platforms for low altitude acquisitions in aerial photogrammetric approach, together with terrestrial panoramic acquisitions (Trimble V10 imaging rover), have been investigated with a comparison toward consolidated Terrestrial Laser Scanning (TLS) measurements. One of the main purposes of the paper is to evaluate the results offered by the technologies used independently and using integrated approaches. A section of the study in fact, is specifically dedicated to experimenting the union of different sensor dense clouds: both dense clouds derived from UAV have been integrated with terrestrial Lidar clouds, to evaluate their fusion. Different test cases have been considered, representing typical situations that can be encountered in archaeological sites.

Truck size and weight enforcement technologies : state of the practice

DOT National Transportation Integrated Search

2009-05-01

This report is a deliverable of Task 2 of FHWAs Truck Size and Weight Enforcement Technology Project. The primary project objective was to recommend strategies to encourage the deployment of roadside technologies to improve truck size and weight e...

Development and Application of a Decision Support System for Water Management Investigations in the Upper Yakima River, Washington

USGS Publications Warehouse

Bovee, Ken D.; Waddle, Terry J.; Talbert, Colin; Hatten, James R.; Batt, Thomas R.

2008-01-01

The Yakima River Decision Support System (YRDSS) was designed to quantify and display the consequences of different water management scenarios for a variety of state variables in the upper Yakima River Basin, located in central Washington. The impetus for the YRDSS was the Yakima River Basin Water Storage Feasibility Study, which investigated alternatives for providing additional water in the basin for threatened and endangered fish, irrigated agriculture, and municipal water supply. The additional water supplies would be provided by combinations of water exchanges, pumping stations, and off-channel storage facilities, each of which could affect the operations of the Bureau of Reclamation's (BOR) five headwaters reservoirs in the basin. The driver for the YRDSS is RiverWare, a systems-operations model used by BOR to calculate reservoir storage, irrigation deliveries, and streamflow at downstream locations resulting from changes in water supply and reservoir operations. The YRDSS uses output from RiverWare to calculate and summarize changes at 5 important flood plain reaches in the basin to 14 state variables: (1) habitat availability for selected life stages of four salmonid species, (2) spawning-incubation habitat persistence, (3) potential redd scour, (4) maximum water temperatures, (5) outmigration for bull trout (Salvelinus confluentus) from headwaters reservoirs, (6) outmigration of salmon smolts from Cle Elum Reservoir, (7) frequency of beneficial overbank flooding, (8) frequency of damaging flood events, (9) total deliverable water supply, (10) total water supply deliverable to junior water rights holders, (11) end-of-year reservoir carryover, (12) potential fine sediment transport rates, (13) frequency of events capable of armor layer disruption, and (14) geomorphic work performed during each water year. Output of the YRDSS consists of a series of conditionally formatted scoring tables, wherein the changes to a state variable resulting from an operational scenario are compiled and summarized. Increases in the values for state variables result in their respective backgrounds to turn green in the scoring matrix, whereas decreases in the values for state variables result in their respective backgrounds turning red. This convention was designed to provide decision makers with a quick visual assessment of the overall results of an operating scenario. An evaluation matrix and a variety of weighting strategies to reflect the relative importance of different state variables are also presented as options for further distillation of YRDSS results during the decision-making process.

HPT Clearance Control: Intelligent Engine Systems-Phase 1

NASA Technical Reports Server (NTRS)

2005-01-01

The following work has been completed to satisfy the Phase I Deliverables for the "HPT Clearance Control" project under NASA GRC's "Intelligent Engine Systems" program: (1) Need for the development of an advanced HPT ACC system has been very clearly laid out, (2) Several existing and potential clearance control systems have been reviewed, (3) A scorecard has been developed to document the system, performance (fuel burn, range, payload, etc.), thermal, and mechanical characteristics of the existing clearance control systems, (4) Engine size and flight cycle selection for the advanced HPT ACC system has been reviewed with "large engine"/"long range mission" combination showing the most benefit, (5) A scoring criteria has been developed to tie together performance parameters for an objective, data driven comparison of competing systems, and (6) The existing HPT ACC systems have been scored based on this scoring system.

WINCADRE INORGANIC (WINDOWS COMPUTER-AIDED DATA REVIEW AND EVALUATION)

EPA Science Inventory

WinCADRE (Computer-Aided Data Review and Evaluation) is a Windows -based program designed for computer-assisted data validation. WinCADRE is a powerful tool which significantly decreases data validation turnaround time. The electronic-data-deliverable format has been designed in...

Trip Report, Europe - November/December 1994

DOT National Transportation Integrated Search

1995-01-12

THIS TRIP REPORT IS PREPARED AS A DELIVERABLE UNDER THE FHWA CONTRACT NO. DTFH61-93-C-00064. THE REPORT WILL BEGIN WITH A BRIEF DESCRIPTION OF THE PURPOSES AND DESTINATIONS OF THE TWO-WEEK EUROPEAN TRIP TAKEN BY THE CONSULTANT IN NOVEMBER/DECEMBER 19...

System integration case study : FAST-TRAC : preliminary IV deliverable : #2-systems integration case study

DOT National Transportation Integrated Search

1999-02-12

This report focuses on the system integration aspect of the Transportation Information Management System (TIMS), a component of the FAST-TRAC project. The TIMS functions as the center of a communications network which integrates advanced traffic cont...

Structural reliability methods: Code development status

NASA Astrophysics Data System (ADS)

Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

1991-05-01

The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

Structural reliability methods: Code development status

NASA Technical Reports Server (NTRS)

Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

1991-01-01

The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

SU-E-J-174: Adaptive PET-Based Dose Painting with Tomotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darwish, N; Mackie, T; Thomadsen, B

2014-06-01

Purpose: PET imaging can be converted into dose prescription directly. Due to the variability of the intensity of PET the image, PET prescription maybe superior over uniform dose prescription. Furthermore, unlike the case in image reconstruction of not knowing the image solution in advance, the prescribed dose is known from a PET image a priori. Therefore, optimum beam orientations are derivable. Methods: We can assume the PET image to be the prescribed dose and invert it to determine the energy fluence. The same method used to reconstruct tissue images from projections could be used to solve the inverse problem ofmore » determining beam orientations and modulation patterns from a dose prescription [10]. Unlike standard tomographic reconstruction of images from measured projection profiles, the inversion of the prescribed dose results in photon fluence which may be negative and therefore unphysical. Two-dimensional modulated beams can be modelled in terms of the attenuated or exponential radon transform of the prescribed dose function (assumed to be the PET image in this case), an application of a Ram-Lak filter, and inversion by backprojection. Unlike the case in PET processing, however, the filtered beam obtained from the inversion represents a physical photon fluence. Therefore, a positivity constraint for the fluence (setting negative fluence to zero) must be applied (Brahme et al 1982, Bortfeld et al 1990) Results: Truncating the negative profiles from the PET data results in an approximation of the derivable energy fluence. Backprojection of the deliverable fluence is an approximation of the dose delivered. The deliverable dose is comparable to the original PET image and is similar to the PET image. Conclusion: It is possible to use the PET data or image as a direct indicator of deliverable fluence for cylindrical radiotherapy systems such as TomoTherapy.« less

Deficiency in DGCR8-dependent canonical microRNAs causes infertility due to multiple abnormalities during uterine development in mice.

PubMed

Kim, Yeon Sun; Kim, Hye-Ryun; Kim, Hyongbum; Yang, Seung Chel; Park, Mira; Yoon, Jung Ah; Lim, Hyunjung J; Hong, Seok-Ho; DeMayo, Francesco J; Lydon, John P; Choi, Youngsok; Lee, Dong Ryul; Song, Haengseok

2016-02-02

DGCR8 is an RNA-binding protein that interacts with DROSHA to produce pre-microRNA in the nucleus, while DICER generates not only mature microRNA, but also endogenous small interfering RNAs in the cytoplasm. Here, we produced Dgcr8 conditional knock-out mice using progesterone receptor (PR)-Cre (Dgcr8(d/d)) and demonstrated that canonical microRNAs dependent on the DROSHA-DGCR8 complex are required for uterine development as well as female fertility in mice. Adult Dgcr8(d/d) females neither underwent regular reproductive cycles nor produced pups, whereas administration of exogenous gonadotropins induced normal ovulation in these mice. Interestingly, immune cells associated with acute inflammation aberrantly infiltrated into reproductive organs of pregnant Dgcr8(d/d) mice. Regarding uterine development, multiple uterine abnormalities were noticeable at 4 weeks of age when PR is significantly increased, and the severity of these deformities increased over time. Gland formation and myometrial layers were significantly reduced, and the stromal cell compartment did not expand and became atrophic during uterine development in these mice. These results were consistent with aberrantly reduced stromal cell proliferation and completely failed decidualization. Collectively, we suggest that DGCR8-dependent canonical microRNAs are essential for uterine development and physiological processes such as proper immune modulation, reproductive cycle, and steroid hormone responsiveness in mice.

Development of adaptive IWRM options for climate change mitigation and adaptation

NASA Astrophysics Data System (ADS)

Flügel, W.-A.

2011-04-01

Adaptive Integrated Water Resources Management (IWRM) options related to the impacts of climate change in the twinning basins of the Upper Danube River Basin (UDRB) and the Upper Brahmaputra River Basin (UBRB) are developed based on the results obtained in the different work packages of the BRAHMATWINN project. They have been described and discussed in Chapter 2 till Chapter 9 and the paper is referring to and is integrating these findings with respect to their application and interpretation for the development of adaptive IWRM options addressing impacts of climate change in river basins. The data and information related to the results discussed in Chapter 2 till 8 have been input to the RBIS as a central component of the IWRMS (Chapter 9). Meanwhile the UDRB has been analysed with respect to IWRM and climate change impacts by various projects, i.e. the GLOWA-Danube BMBF funded project (GLOWA Danube, 2009; Mauser and Ludwig, 2002) the UBRB has not been studied so far in a similar way as it was done in the BRAHMATWINN project. Therefore the IWRM option development is focussing on the UBRB but the methodology presented can be applied for the UDRB and other river basins as well. Data presented and analysed in this chapter have been elaborated by the BRAHMATWINN project partners and are published in the project deliverable reports available from the project homepage http://www.brahmatwinn.uni-jena.de/index.php?id=5311&L=2.

Antenna Test Facility (ATF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

Lin, Greg

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ATF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Chamber B Thermal/Vacuum Chamber: User Test Planning Guide

NASA Technical Reports Server (NTRS)

Montz, Mike E.

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of Chamber B. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Radiant Heat Test Facility (RHTF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

DelPapa, Steven

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the RHTF. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Electronic Systems Test Laboratory (ESTL) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Robinson, Neil

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Using Education Technology as a Proactive Approach to Healthy Ageing.

PubMed

Rodger, Daragh; Spencer, Anne; Hussey, Pamela

2016-01-01

Bone Health in the Park was created in Ireland and is an online health promotion education resource focussing on bone health, healthy ageing and falls prevention. The programme was designed by an Advanced Nurse Practitioner in collaboration with an Education Technologist and primarily uses storytelling to promote education specifically on bone health and falls risk prevention for health care professionals, clients, families and informal carers. This paper reports on core deliverables from this programme from 2010 to 2015, and provides insight into their development, in addition to details on its clinical effectiveness by using technology enhanced learning to underpin health promotion initiatives.

Communication Systems Simulation Laboratory (CSSL): Simulation Planning Guide

NASA Technical Reports Server (NTRS)

Schlesinger, Adam

2012-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the CSSL. The Simulation Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Advanced Materials Laboratory User Test Planning Guide

NASA Technical Reports Server (NTRS)

Orndoff, Evelyne

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the Advanced Materials Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Structures Test Laboratory (STL). User Test Planning Guide

NASA Technical Reports Server (NTRS)

Zipay, John J.

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the STL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Systems Engineering Simulator (SES) Simulator Planning Guide

NASA Technical Reports Server (NTRS)

McFarlane, Michael

2011-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the SES. The Simulator Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Computational Electromagnetics (CEM) Laboratory: Simulation Planning Guide

NASA Technical Reports Server (NTRS)

Khayat, Michael A.

2011-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the CEM Laboratory. The Simulation Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Development of data representation standards by the human proteome organization proteomics standards initiative

PubMed Central

Albar, Juan Pablo; Binz, Pierre-Alain; Eisenacher, Martin; Jones, Andrew R; Mayer, Gerhard; Omenn, Gilbert S; Orchard, Sandra; Vizcaíno, Juan Antonio; Hermjakob, Henning

2015-01-01

Objective To describe the goals of the Proteomics Standards Initiative (PSI) of the Human Proteome Organization, the methods that the PSI has employed to create data standards, the resulting output of the PSI, lessons learned from the PSI’s evolution, and future directions and synergies for the group. Materials and Methods The PSI has 5 categories of deliverables that have guided the group. These are minimum information guidelines, data formats, controlled vocabularies, resources and software tools, and dissemination activities. These deliverables are produced via the leadership and working group organization of the initiative, driven by frequent workshops and ongoing communication within the working groups. Official standards are subjected to a rigorous document process that includes several levels of peer review prior to release. Results We have produced and published minimum information guidelines describing what information should be provided when making data public, either via public repositories or other means. The PSI has produced a series of standard formats covering mass spectrometer input, mass spectrometer output, results of informatics analysis (both qualitative and quantitative analyses), reports of molecular interaction data, and gel electrophoresis analyses. We have produced controlled vocabularies that ensure that concepts are uniformly annotated in the formats and engaged in extensive software development and dissemination efforts so that the standards can efficiently be used by the community. Conclusion In its first dozen years of operation, the PSI has produced many standards that have accelerated the field of proteomics by facilitating data exchange and deposition to data repositories. We look to the future to continue developing standards for new proteomics technologies and workflows and mechanisms for integration with other omics data types. Our products facilitate the translation of genomics and proteomics findings to clinical and biological phenotypes. The PSI website can be accessed at http://www.psidev.info. PMID:25726569

48 CFR 252.208-7000 - Intent to furnish precious metals as Government-furnished material.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Offeror shall cite the type (silver, gold, platinum, palladium, iridium, rhodium, and ruthenium) and... metal* Quantity Deliverable item (NSN and nomenclature)!!rs *If platinum or palladium, specify whether...

48 CFR 252.208-7000 - Intent to furnish precious metals as Government-furnished material.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Offeror shall cite the type (silver, gold, platinum, palladium, iridium, rhodium, and ruthenium) and... metal* Quantity Deliverable item (NSN and nomenclature)!!rs *If platinum or palladium, specify whether...

48 CFR 252.208-7000 - Intent to furnish precious metals as Government-furnished material.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Offeror shall cite the type (silver, gold, platinum, palladium, iridium, rhodium, and ruthenium) and... metal* Quantity Deliverable item (NSN and nomenclature)!!rs *If platinum or palladium, specify whether...

48 CFR 252.208-7000 - Intent to furnish precious metals as Government-furnished material.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Offeror shall cite the type (silver, gold, platinum, palladium, iridium, rhodium, and ruthenium) and... metal* Quantity Deliverable item (NSN and nomenclature)!!rs *If platinum or palladium, specify whether...

Analytical Assessment of the Reciprocating Feed System

NASA Technical Reports Server (NTRS)

Eddleman, David E.; Blackmon, James B.; Morton, Christopher D.

2006-01-01

A preliminary analysis tool has been created in Microsoft Excel to determine deliverable payload mass, total system mass, and performance of spacecraft systems using various types of propellant feed systems. These mass estimates are conducted by inserting into the user interface the basic mission parameters (e.g., thrust, burn time, specific impulse, mixture ratio, etc.), system architecture (e.g., propulsion system type and characteristics, propellants, pressurization system type, etc.), and design properties (e.g., material properties, safety factors, etc.). Different propellant feed and pressurization systems are available for comparison in the program. This gives the user the ability to compare conventional pressure fed, reciprocating feed system (RFS), autogenous pressurization thrust augmentation (APTA RFS), and turbopump systems with the deliverable payload, inert mass, and total system mass being the primary comparison metrics. Analyses of several types of missions and spacecraft were conducted and it was found that the RFS offers a performance improvement, especially in terms of delivered payload, over conventional pressure fed systems. Furthermore, it is competitive with a turbopump system at low to moderate chamber pressures, up to approximately 1,500 psi. Various example cases estimating the system mass and deliverable payload of several types of spacecraft are presented that illustrate the potential system performance advantages of the RFS. In addition, a reliability assessment of the RFS was conducted, comparing it to simplified conventional pressure fed and turbopump systems, based on MIL-STD 756B; these results showed that the RFS offers higher reliability, and thus substantially longer periods between system refurbishment, than turbopump systems, and is competitive with conventional pressure fed systems. This is primarily the result of the intrinsic RFS fail-operational capability with three run tanks, since the system can operate with just two run tanks.

PRRSV and the pregnant female

USDA-ARS?s Scientific Manuscript database

The Pregnant Gilt Model (PGM) is substantially complete and has provided substantive deliverables for the swine industry in Canada and beyond. The success of the PGM was largely dependent on a team of more than 30 researchers, students and technicians, along with external collaborators and instituti...

Analysis of corridor delay under SCATS control : FAST-TRAC Phase III deliverable

DOT National Transportation Integrated Search

1998-04-01

The study was designed to determine the change in travel time following the implementation of the Sydney Coordinated Adaptive Traffic System (SCATS) in Oakland County, Michigan. A before/after comparison was used to examine the change in travel time ...

45 CFR 95.610 - Submission of advance planning documents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and implementation; (v) A commitment to conduct/prepare the problem(s) needs assessment, feasibility... statement of the problem/need that the existing capabilities can not resolve, new or changed program..., planning activities/deliverables, State and contractor resource needs, planning project procurement...

45 CFR 95.610 - Submission of advance planning documents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and implementation; (v) A commitment to conduct/prepare the problem(s) needs assessment, feasibility... statement of the problem/need that the existing capabilities can not resolve, new or changed program..., planning activities/deliverables, State and contractor resource needs, planning project procurement...

45 CFR 95.610 - Submission of advance planning documents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and implementation; (v) A commitment to conduct/prepare the problem(s) needs assessment, feasibility... statement of the problem/need that the existing capabilities can not resolve, new or changed program..., planning activities/deliverables, State and contractor resource needs, planning project procurement...

Aglycone Ebselen and β-d-Xyloside Primed Glycosaminoglycans Co-contribute to Ebselen β-d-Xyloside-Induced Cytotoxicity.

PubMed

Tang, Yang; Zhang, Siqi; Chang, Yajing; Fan, Dacheng; Agostini, Ariane De; Zhang, Lijuan; Jiang, Tao

2018-04-12

Most β-d-xylosides with hydrophobic aglycones are nontoxic primers for glycosaminoglycan assembly in animal cells. However, when Ebselen was conjugated to d-xylose, d-glucose, d-galactose, and d-lactose (8A-D), only Ebselen β-d-xyloside (8A) showed significant cytotoxicity in human cancer cells. The following facts indicated that the aglycone Ebselen and β-d-xyloside primed glycosaminoglycans co-contributed to the observed cytotoxicity: 1. Ebselen induced S phase cell cycle arrest, whereas 8A induced G2/M cell cycle arrest; 2. 8A augmented early and late phase cancer cell apoptosis significantly compared to that of Ebselen and 8B-D; 3. Both 8A and phenyl-β-d-xyloside primed glycosaminoglycans with similar disaccharide compositions in CHO-pgsA745 cells; 4. Glycosaminoglycans could be detected inside of cells only when treated with 8A, indicating Ebselen contributed to the unique property of intracellular localization of the primed glycosaminoglycans. Thus, 8A represents a lead compound for the development of novel antitumor strategy by targeting glycosaminoglycans.

Age 60 study, part IV : experimental evaluation of pilot performance.

DOT National Transportation Integrated Search

1994-10-01

This document is one of four products completed as a part of the Age 60 Rule Research Contract monitored by Pam Della Rocco, Civil Aerospace Medical Institute. This report was a deliverable from the research contract with Hilton Systems, Inc. on the ...

School Planning, Evaluation and Communication System (SPECS).

ERIC Educational Resources Information Center

Flocco, Edward C.

A comprehensive school planning tool is available from General Learning Corporation and the Center for the Advanced Study of Educational Administration at the University of Oregon. This School Planning, Evaluation and Communication System (SPECS) provides a deliverable system of training, implementation strategies and materials and technical…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halsey, W

This report provides a summary for FY-2008 of activities, analyses and products from the Material Transportation, Storage and Disposal (M-TSD) sub-task of Systems Analysis within the Advanced Fuel Cycle Research & Development area of the Global Nuclear Energy Partnership. The objective of this work is to evaluate near-term material management requirements for initial GNEP facilities and activities, long-term requirements for large-scale GNEP technology deployment, and alternatives and paths forward to meet these needs. For FY-08, the work expanded to include the Integrated Waste Management Strategy as well as integration with the newly formed Waste Forms Campaign. The M-TSD team wasmore » expanded with the addition of support from Savannah River National Lab (SRNL) to the existing team of Lawrence Livermore National Lab (LLNL), Argonne National Lab (ANL), Idaho National Lab (INL), Sandia National Lab (SNL) and University of Nevada - Reno (UN-R). During the first half of the year, analysis was focused on providing supporting technical analysis and documentation to support anticipated high-level decisions on program direction. A number of analyses were conducted and reports prepared as program deliverables. This work is briefly summarized in this report. Analyses provided informally to other program efforts are included in this report to provide documentation. This year-end summary was planned primarily as a compilation of activities following the anticipated programmatic decisions. These decisions were deferred beyond the end of the year, and funds were reallocated in a number of areas, thus reducing the M-TSD activities. This report summarizes the miscellaneous 'ad-hoc' work conducted during the later part of the year, such as support to the draft Programmatic Environmental Impact Statement (PEIS), and support to other program studies. Major programmatic contributions from the M-TSD team during the year included: (1) Completion of the IWMS in March 2008 as the baseline for waste management calculations for the GNEP Programmatic Environmental Impact Statement (PEIS). The IWMS represents a collaborative effort between the Systems Analysis, Waste Forms, and Separations Campaigns with contributing authors from multiple laboratories. The IWMS reference is: 'Global Nuclear Energy Partnership Integrated Waste Management Strategy, D. Gombert, INL, et al, GNEP-WAST-WAST-AI-RT-2008-000214, March 2008'. (2) As input to the IWMS and support for program decisions, an evaluation of the current regulatory framework in the U.S. pertaining to the disposal of radioactive wastes under an advanced nuclear fuel cycle was completed by ANL. This evaluation also investigated potential disposal pathways for these wastes. The entire evaluation is provided in Appendix A of this report. (3) Support was provided to the development of the GNEP Programmatic Environmental Impact Statement from INL, SNL and ANL M-TSD staff. (4) M-TSD staff prepared input for DSARR (Dynamic Systems Analysis Report for Nuclear Fuel Recycle) report. The DSARR is an INL led report to examine the time-dependent dynamics for a transition from the current open fuel cycle to either a 1-tier or 2-tier closed fuel cycle. Section 5.3 Waste Management Impacts was provided to INL for incorporation into the DSARR. (5) SNL M-TSD staff prepared a M2 milestone report 'Material Transportation, Storage and Disposal Contribution for Secretarial Decision Package'. The report purpose was to comprehensively evaluate and discuss packaging, storage, and transportation for all potential nuclear and radioactive materials in the process and waste streams being considered by the GNEP program. In particular, a systems view was used to capture all packaging, storage, and transport operations needed to link the various functional aspects of the fuel cycle. (6) SRNL M-TSD staff developed a deliverable report 'Management of Decay Heat from Spent Nuclear Fuel'. This report evaluated a range of options for managing the near-term decay heat associated with Cs and Sr in spent nuclear fuel (SNF) reprocessing wastes. (7) M-TSD staff participated in a series of meetings of the US-Japan GNEP Working Group on Waste Management, developing the content for the first deliverable of the working group.« less

Structures-propulsion interactions and requirements. [large space structures

NASA Technical Reports Server (NTRS)

Coyner, J. V.

1982-01-01

The effects of low-thrust primary propulsion system characteristics on the mass, area, and orbit transfer characteristics of large space systems (LSS) were determined. Three general structural classes of LSS were considered, each with a broad range of diameters and nonstructural surface densities. While transferring the deployed structure from LEO and to GEO, an acceleration range of 0.02 to 0.1 g's was found to maximize deliverable payload based on structural mass impact. After propulsion system parametric analyses considering four propellant combinations produced values for available payload mass, length and volume, a thrust level range which maximizes deliverable LSS diameter was determined corresponding to a structure and propulsion vehicle. The engine start and/or shutdown thrust transients on the last orbit transfer (apogee) burn can impose transient loads which would be greater than the steady-state loads at the burnout acceleration. The effect of the engine thrust transients on the LSS was determined from the dynamic models upon which various engine ramps were imposed.

Sand-control completion design, installation, and performance in high-rate gas wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, R.C.; Boggan, S.A.

1998-09-01

The Jupiter fields consist of a number of separate Rotliegendes gas reservoirs located approximately 90 miles off the Lincolnshire coast of the UK. The fields that make up Jupiter are Ganymede, Calisto, Europa, Sinope, and Thebe. Originally discovered in 1970, initial appraisal wells indicated poor reservoir properties and low deliverabilities. Development was postponed until a reappraisal of the area in the 1990`s indicated significant upside potential. The initial phase of the Jupiter development plan called for development of Ganymede and Calisto fields, with subsequent phases tying in Europa and Thebe. Initial development planning indicated a need for high field deliverabilitymore » at low capital cost to meet economic targets. A small number of high-rate-potential wells were to be used to deplete the reservoir. Ganymede would be developed by use of a 10-slot platform and Calisto would be developed subsea and tied back to the Ganymede platform. The paper discusses the reservoir, formation assessment, productivity design, drilling design, screen installation, and completion performance.« less

Developing Capture Mechanisms and High-Fidelity Dynamic Models for the MXER Tether System

NASA Technical Reports Server (NTRS)

Canfield, Steven L.

2007-01-01

A team consisting of collaborators from Tennessee Technological University (TTU), Marshall Space Flight Center, BD Systems, and the University of Delaware (herein called the TTU team) conducted specific research and development activities in MXER tether systems during the base period of May 15, 2004 through September 30, 2006 under contract number NNM04AB13C. The team addressed two primary topics related to the MXER tether system: 1) Development of validated high-fidelity dynamic models of an elastic rotating tether and 2) development of feasible mechanisms to enable reliable rendezvous and capture. This contractor report will describe in detail the activities that were performed during the base period of this cycle-2 MXER tether activity and will summarize the results of this funded activity. The primary deliverables of this project were the quad trap, a robust capture mechanism proposed, developed, tested, and demonstrated with a high degree of feasibility and the detailed development of a validated high-fidelity elastic tether dynamic model provided through multiple formulations.

Destination Entry And Retrieval With The Ali-Scout Navigation System Fast-Trac Phase Iib Deliverable

DOT National Transportation Integrated Search

1996-12-01

AFTER TRAINING, 36 DRIVERS RETRIEVED AND ENTERED A TOTAL OF 20 DESTINATIONS USING AN ALI-SCOUT NAVIGATION COMPUTER AND 10 DESTINATIONS USING A TOUCHSCREEN SIMULATION WHILE SITTING IN A VEHICLE MOCKUP. RETRIEVAL INVOLVED KEYING IN PART OF THE DESTINAT...

Knowledge and beliefs about breastfeeding are not determinants for successful breastfeeding.

PubMed

Ishak, Shareena; Adzan, Nur Azeanny M; Quan, Lee K; Shafie, M Hasli; Rani, Nor Azila; Ramli, Kazzoma G

2014-01-01

A cross-sectional prospective study was performed to assess knowledge and attitude toward breastfeeding among mothers in a tertiary hospital in Malaysia and its influence on their breastfeeding practices. Two hundred thirteen women who had delivered healthy babies at term were enrolled. A structured questionnaire containing demographic data and the Iowa Infant Feeding Attitude Score were used, followed by a telephone interview after 8 weeks to determine the feeding outcome. Women of Malay ethnicity with higher education level who had received breastfeeding counseling had a significantly more favorable attitude toward breastfeeding. Ethnicity was found to be a significant determinant in the success of breastfeeding, whereas returning to work was a major reason for discontinuing breastfeeding. In ensuring a successful breastfeeding practice, apart from knowledge and attitude, issues surrounding culture and traditions as well as improving deliverance of readily available support should be addressed.

Knowledge and Beliefs About Breastfeeding Are Not Determinants for Successful Breastfeeding

PubMed Central

Adzan, Nur Azeanny M.; Quan, Lee K.; Shafie, M. Hasli; Rani, Nor Azila; Ramli, Kazzoma G.

2014-01-01

Abstract A cross-sectional prospective study was performed to assess knowledge and attitude toward breastfeeding among mothers in a tertiary hospital in Malaysia and its influence on their breastfeeding practices. Two hundred thirteen women who had delivered healthy babies at term were enrolled. A structured questionnaire containing demographic data and the Iowa Infant Feeding Attitude Score were used, followed by a telephone interview after 8 weeks to determine the feeding outcome. Women of Malay ethnicity with higher education level who had received breastfeeding counseling had a significantly more favorable attitude toward breastfeeding. Ethnicity was found to be a significant determinant in the success of breastfeeding, whereas returning to work was a major reason for discontinuing breastfeeding. In ensuring a successful breastfeeding practice, apart from knowledge and attitude, issues surrounding culture and traditions as well as improving deliverance of readily available support should be addressed. PMID:24893127

Teaching the Healthcare Economics Milestones to Radiology Residents: Our Pilot Curriculum Experience.

PubMed

Prober, Allen S; Mehan, William A; Bedi, Harprit S

2016-07-01

Since July 2013, the Accreditation Council for Graduate Medical Education (ACGME) has required radiology residency programs to implement a set of educational milestones to track residents' educational advancement in six core competencies, including Systems-based Practice. The healthcare economics subcompetency of Systems-based Practice has traditionally been relatively neglected, and given the new increased ACGME oversight, will specifically require greater focused attention. A multi-institutional health-care economics pilot curriculum combining didactic and practical components was implemented across five residency programs. The didactic portion included a package of online recorded presentations, reading, and testing materials developed by the American College of Radiology (ACR's) Radiology Leadership Institute. The practical component involved a series of local meetings led by program faculty with the production of a deliverable based on research of local reimbursement for a noncontrast head computed tomography. The capstone entailed the presentation of each program's deliverable during a live teleconference webcast with a Radiology Leadership Institute content expert acting as moderator and discussion leader. The pilot curriculum was well received by residents and faculty moderators, with 100% of survey respondents agreeing that the pilot met its objective of introducing how reimbursement works in American radiology in 2015 and how business terminology applies to their particular institutions. A health-care economics curriculum in the style of a Massive Open Online Course has strong potential to serve as many residency programs' method of choice in meeting the health-care economics milestones. Copyright © 2016 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

RANT Building Upgrade Pre-Proposal Meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, Melinda Ann; Meadows, Darren W.; Rodriguez, Roger R.

This presentation is designed to provide an overview of the project scope and RFP; discuss interfaces for the construction project; highlight key expectations and deliverables from the subcontractor; and address questions and provide clarification of the project scope.

Aliso Canyon facility is giant among gas storage projects. [Underground

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magruder, P.S.

1975-11-01

Alison Canyon, the largest and newest of the Southern California Gas Company's underground storage fields, has the capacity to provide nearly 50 percent of the company's firm peak day deliverability from systemwide storage. (LK)

20 CFR 638.801 - Staff training.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 3 2012-04-01 2012-04-01 false Staff training. 638.801 Section 638.801... TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.801 Staff training. The... office, and deliverer staff. ...

20 CFR 638.801 - Staff training.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Staff training. 638.801 Section 638.801... TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.801 Staff training. The... office, and deliverer staff. ...

20 CFR 638.801 - Staff training.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Staff training. 638.801 Section 638.801... TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.801 Staff training. The... office, and deliverer staff. ...

Advanced engineering environment pilot project.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwegel, Jill; Pomplun, Alan R.; Abernathy, Rusty

2006-10-01

The Advanced Engineering Environment (AEE) is a concurrent engineering concept that enables real-time process tooling design and analysis, collaborative process flow development, automated document creation, and full process traceability throughout a product's life cycle. The AEE will enable NNSA's Design and Production Agencies to collaborate through a singular integrated process. Sandia National Laboratories and Parametric Technology Corporation (PTC) are working together on a prototype AEE pilot project to evaluate PTC's product collaboration tools relative to the needs of the NWC. The primary deliverable for the project is a set of validated criteria for defining a complete commercial off-the-shelf (COTS) solutionmore » to deploy the AEE across the NWC.« less

48 CFR 2011.104-70 - NRC Clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Technical Reports, when deliverables include a technical report. (b) The contracting officer shall insert the clause at 2052.211-71 Technical Progress Report, in all solicitations and contracts except— (1...) The contracting officer shall insert the clause at 2052.211-72 Financial Status Report, in applicable...

48 CFR 2011.104-70 - NRC Clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Technical Reports, when deliverables include a technical report. (b) The contracting officer shall insert the clause at 2052.211-71 Technical Progress Report, in all solicitations and contracts except— (1...) The contracting officer shall insert the clause at 2052.211-72 Financial Status Report, in applicable...

48 CFR 2011.104-70 - NRC Clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Technical Reports, when deliverables include a technical report. (b) The contracting officer shall insert the clause at 2052.211-71 Technical Progress Report, in all solicitations and contracts except— (1...) The contracting officer shall insert the clause at 2052.211-72 Financial Status Report, in applicable...

48 CFR 2011.104-70 - NRC Clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Technical Reports, when deliverables include a technical report. (b) The contracting officer shall insert the clause at 2052.211-71 Technical Progress Report, in all solicitations and contracts except— (1...) The contracting officer shall insert the clause at 2052.211-72 Financial Status Report, in applicable...

48 CFR 2011.104-70 - NRC Clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Technical Reports, when deliverables include a technical report. (b) The contracting officer shall insert the clause at 2052.211-71 Technical Progress Report, in all solicitations and contracts except— (1...) The contracting officer shall insert the clause at 2052.211-72 Financial Status Report, in applicable...

20 CFR 638.539 - Complaints and disputes.

Code of Federal Regulations, 2010 CFR

2010-04-01

....539 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Center Operations § 638.539 Complaints and disputes. (a) Center and other deliverer grievance procedures. Each center operator or other Job Corps...

Interim report deliverable 3.2 : focus group management process of the restricted use technology study

DOT National Transportation Integrated Search

2005-09-30

The Altarum Institute, under contract to the Michigan Department of Transportation (MDOT), currently is engaged in a project called the Altarum Restricted Use Technology Study. This study, an 18-month effort, seeks to apply restricted use techn...

From Field Work to Deliverables. Experiences on the Tin House Courtyard Documentation

NASA Astrophysics Data System (ADS)

Bello Caballero, L.; Mezzino, D.; Federman, A.; Santana Quintero, M.

2017-08-01

The Tin House Courtyard is a property of the National Capital Commission (NCC) in Ottawa, Canada. The site is located within the `Mile of History', a historical route running from Parliament Hill to the Governor General's residence. Currently, existing assets are under intervention works that include several preservation and renewal actions. Within the broader project, one of the tasks before construction works started was the documentation of the set of facades. The Carleton Immersive Media Studio (CIMS) at Carleton University in Ottawa was commissioned by NCC to conduct the recording of the area. This paper describes the process undertaken from field work to the final deliverable to the client, as well as the issues faced in between. Nowadays, up to date surveying technologies have revolutionized the methodologies for cultural heritage documentation. In this regard, the recording strategy employed encompassed the use of photogrammetry, laser scanner, total station, as well as different pre and post processing software in order to generate the desired outcomes.

Piloting a Nationally Disseminated, Interactive Human Subjects Protection Program for Community Partners: Design, Content, and Evaluation

PubMed Central

Eakin, Brenda; Kirk, Rosalind; Piechowski, Patricia; Thomas, Barbara

2014-01-01

Abstract Funders, institutions, and research organizations are increasingly recognizing the need for human subjects protections training programs for those engaged in academic research. Current programs tend to be online and directed toward an audience of academic researchers. Research teams now include many nonacademic members, such as community partners, who are less likely to respond to either the method or the content of current online trainings. A team at the CTSA‐supported Michigan Institute for Clinical and Health Research at the University of Michigan developed a pilot human subjects protection training program for community partners that is both locally implemented and adaptable to local contexts, yet nationally consistent and deliverable from a central administrative source. Here, the developers and the analysts of this program discuss its development, its content, and the results of its evaluation. PMID:24720288

Piloting a nationally disseminated, interactive human subjects protection program for community partners: design, content, and evaluation.

PubMed

Solomon, Stephanie; Eakin, Brenda; Kirk, Rosalind; Piechowski, Patricia; Thomas, Barbara

2014-04-01

Funders, institutions, and research organizations are increasingly recognizing the need for human subjects protections training programs for those engaged in academic research. Current programs tend to be online and directed toward an audience of academic researchers. Research teams now include many nonacademic members, such as community partners, who are less likely to respond to either the method or the content of current online trainings. A team at the CTSA-supported Michigan Institute for Clinical and Health Research at the University of Michigan developed a pilot human subjects protection training program for community partners that is both locally implemented and adaptable to local contexts, yet nationally consistent and deliverable from a central administrative source. Here, the developers and the analysts of this program discuss its development, its content, and the results of its evaluation. © 2014 Wiley Periodicals, Inc.

Automated Procurement System (APS) revised project management plan (DS-03)

NASA Technical Reports Server (NTRS)

Murphy, Diane R.

1995-01-01

The Project Plan is the governing document for the implementation of the Automated Procurement System (APS). It includes a description of the proposed system, describes the work to be done, establishes a schedule of deliverables, and discusses the major standards and procedures to be followed.

Establishment of Center for Diagnostic Nanosystems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maher, John

Funding from this project was used to develop several “mini-cores” that contained shared equipment that could be used by researchers at Marshall University. Equipment purchased during this project included: a fluorescencent microplate reader, FTIR system, UV-Vis spectrophotometer, and DNA/RNA analyzer. Other deliverables included the funding of several graduate and undergraduate students, postdoctoral fellows and two research assistant professors. Projects supported by this funding included studies performed at the whole animal, organ, cellular and nano level. Several different types of researchers were supported including undergraduates, graduates, postdoctoral fellows and research assistant professors. The main outcomes of this work was the developmentmore » of new types of nanoparticles that could be used for the treatment of pulmonary arterial hypertension and sepsis. Additional efforts to develop these projects are ongoing.« less

A component-based problem list subsystem for the HOLON testbed. Health Object Library Online.

PubMed Central

Law, V.; Goldberg, H. S.; Jones, P.; Safran, C.

1998-01-01

One of the deliverables of the HOLON (Health Object Library Online) project is the specification of a reference architecture for clinical information systems that facilitates the development of a variety of discrete, reusable software components. One of the challenges facing the HOLON consortium is determining what kinds of components can be made available in a library for developers of clinical information systems. To further explore the use of component architectures in the development of reusable clinical subsystems, we have incorporated ongoing work in the development of enterprise terminology services into a Problem List subsystem for the HOLON testbed. We have successfully implemented a set of components using CORBA (Common Object Request Broker Architecture) and Java distributed object technologies that provide a functional problem list application and UMLS-based "Problem Picker." Through this development, we have overcome a variety of obstacles characteristic of rapidly emerging technologies, and have identified architectural issues necessary to scale these components for use and reuse within an enterprise clinical information system. PMID:9929252

A component-based problem list subsystem for the HOLON testbed. Health Object Library Online.

PubMed

Law, V; Goldberg, H S; Jones, P; Safran, C

1998-01-01

One of the deliverables of the HOLON (Health Object Library Online) project is the specification of a reference architecture for clinical information systems that facilitates the development of a variety of discrete, reusable software components. One of the challenges facing the HOLON consortium is determining what kinds of components can be made available in a library for developers of clinical information systems. To further explore the use of component architectures in the development of reusable clinical subsystems, we have incorporated ongoing work in the development of enterprise terminology services into a Problem List subsystem for the HOLON testbed. We have successfully implemented a set of components using CORBA (Common Object Request Broker Architecture) and Java distributed object technologies that provide a functional problem list application and UMLS-based "Problem Picker." Through this development, we have overcome a variety of obstacles characteristic of rapidly emerging technologies, and have identified architectural issues necessary to scale these components for use and reuse within an enterprise clinical information system.

Updated workshop materials for preserving and enhancing the functionality of highways in Texas

DOT National Transportation Integrated Search

2010-01-01

The workshop material is based off of TxDOT research project 0-6208 conducted in 2009. The project included three deliverables. These included a final report, a guidebook, and a summary report. A copy of the guidebook is included in the back of the p...

Northwood High School: A Good Place To Work? Final Deliverable.

ERIC Educational Resources Information Center

Louis, Karen Seashore

Prepared to assist teachers who are using the case in class discussion, this case study describes a suburban, college-preparatory high school located in the pseudonymously named "Northwood," a midwestern "rust belt" city characterized by rapidly shifting demographics and a growing commercial tax base. Although the city is now…

Measuring Nursing Value from the Electronic Health Record.

PubMed

Welton, John M; Harper, Ellen M

2016-01-01

We report the findings of a big data nursing value expert group made up of 14 members of the nursing informatics, leadership, academic and research communities within the United States tasked with 1. Defining nursing value, 2. Developing a common data model and metrics for nursing care value, and 3. Developing nursing business intelligence tools using the nursing value data set. This work is a component of the Big Data and Nursing Knowledge Development conference series sponsored by the University Of Minnesota School Of Nursing. The panel met by conference calls for fourteen 1.5 hour sessions for a total of 21 total hours of interaction from August 2014 through May 2015. Primary deliverables from the bit data expert group were: development and publication of definitions and metrics for nursing value; construction of a common data model to extract key data from electronic health records; and measures of nursing costs and finance to provide a basis for developing nursing business intelligence and analysis systems.

Development of the Russian matrix sentence test.

PubMed

Warzybok, Anna; Zokoll, Melanie; Wardenga, Nina; Ozimek, Edward; Boboshko, Maria; Kollmeier, Birger

2015-01-01

To develop the Russian matrix sentence test for speech intelligibility measurements in noise. Test development included recordings, optimization of speech material, and evaluation to investigate the equivalency of the test lists and training. For each of the 500 test items, the speech intelligibility function, speech reception threshold (SRT: signal-to-noise ratio, SNR, that provides 50% speech intelligibility), and slope was obtained. The speech material was homogenized by applying level corrections. In evaluation measurements, speech intelligibility was measured at two fixed SNRs to compare list-specific intelligibility functions. To investigate the training effect and establish reference data, speech intelligibility was measured adaptively. Overall, 77 normal-hearing native Russian listeners. The optimization procedure decreased the spread in SRTs across words from 2.8 to 0.6 dB. Evaluation measurements confirmed that the 16 test lists were equivalent, with a mean SRT of -9.5 ± 0.2 dB and a slope of 13.8 ± 1.6%/dB. The reference SRT, -8.8 ± 0.8 dB for the open-set and -9.4 ± 0.8 dB for the closed-set format, increased slightly for noise levels above 75 dB SPL. The Russian matrix sentence test is suitable for accurate and reliable speech intelligibility measurements in noise.

Project: Toward a National Educational Testing Network. Final Report.

ERIC Educational Resources Information Center

Bock, Darrell R.

Three fiscal year 1987 deliverables due for the "Toward a National Educational Testing Network: Feasibility Study of Duplex Design" are presented. The study is concerned with implementation of statewide and interstate testing of student attainment. The report includes: (1) a duplex design (DD) review paper discussing the means by which…

Investigating the Nature of Dark Energy using Type Ia Supernovae with WFIRST-AFTA Space Mission

NASA Astrophysics Data System (ADS)

Perlmutter, Saul

Scientifically, the WFIRST supernova program is unique: it makes possible a dark energy measurement that no other space mission or ground-based project is addressing, a measurement that will set the standard in determining the expansion history of the universe continuously from low to high redshifts (0.1 < z < 1.7). In the context of the WFIRST Science Definition Team several participants in this proposal have developed a first version of a supernova program, described in the WFIRST SDT Report. While this program was judged to be a robust one, and the estimates of the sensitivity to the cosmological parameters were felt to be reliable, due to limitations of time the analysis was clearly limited in depth on a number of issues. The objective of this proposal is to further develop this program. Technically this is the WFIRST measurement that arguably requires the most advanced project development, since it requires near-real-time analysis and follow-up with WFIRST, and since it is using the IFU spectrograph in the WFI package, the IFU being the WFIRST instrument that does not yet have a completely consistent set of specifications in the design iteration of the SDT report. In this proposal for the WFIRST Scientific Investigation Team, focused primarily on the supernova dark energy measurements, we address these crucial technical needs by bringing the larger supernova community's expertise on the science elements together with a smaller focused team that can produce the specific deliverables. Thus the objectives of this 5 year proposal are the following: 1. Development of scientific performance requirements for the study of Dark Energy using Type Ia supernovae 2. Design an observing strategy using the Wide Field Instrument (WFI) and the Integral Field Spectrometer Unit (IFU) 3. Development of science data analysis techniques and data analysis software 4. Development of ground and space calibration requirements and estimating realistic correlated errors, both statistical and systematic 5. Development of simulations and data challenges to validate the above 6. Development of complete plans in coordination with WFIRST project, for all aspects of science simulations, precursor observations, ground calibration, observational needs, data processing, anciliary data collection/incorporation, analysis, dissemination and documentation of the proposed science investigation. The 5 year program also intends to provide the following deliverables: 1. Documentation describing detailed scientific performance requirements 2. Documentation describing a design of an observing program 3. Documentation of science data analysis techniques 4. Simulations and data challenges to validate the above items 5. Algorithms used to perform processing of science data to serve as a basis for the WFIRST pipeline To achieve these objectives the plan is to set up a Supernova Project Office, seven Supernova Working Groups, and two Supernova Software Deliverables Teams. During the recent years of work with the Science Definition Team, it has been clear that the WFIRST Project Office requires a continuous series of scientific answers to the stream of design and requirements questions that arise in the development of the mission. One of the highest priorities of the Supernova Project Office will be to coordinate with the WFIRST Project Office and be the one-stop-shopping source of answers to such questions. The second topic of this proposal is Weak Lensing (WL). The intrinsic broad wavelength coverage and excellent flux calibration of the IFU spectra will provide an important training for the photometric redshift measurements, beyond what is possible from the ground, required for the WL survey. At this time the IFU design details are not fully developed, and our studies will ensure that the WL photo-z requirements are folded into a realistic final IFU design.

The ODDI Odyssey: Developing and Integrating Operations for the International Space Station

NASA Astrophysics Data System (ADS)

Deal, Ryan W.

2002-01-01

International Space Station (ISS) comprise the deliverable products (OP-01 Reports) of the Boeing Operations Data Development and Integration (ODDI) Integrated Product Team (IPT) to the NASA customer. The ODDI IPT's mission is to exceed the customer's expectations by providing high-quality data and sound techniques for assembling and operating the ISS. strategies in order to streamline the generation of operations products that the Mission Operations Directorate (MOD) utilizes for its crew and ground operations procedures development. Just as for other business practices, operations is a transformation process, converting inputs (resources) into outputs (products) based on a strategy that works best for the established competitive priorities of the operations organization. product reviews, and supporting other ISS operations duties (such as Mission Evaluation Room support) must be balanced with meeting schedules for delivery of the ODDI IPT's OP-01 Reports in accordance with the ISS assembly sequence timeline.

Medical exemption program study : preliminary report of findings

DOT National Transportation Integrated Search

2006-10-13

This Preliminary Report of Findings is the third deliverable in the Medical Exemption Program Study, being performed by Cambridge Systematics on behalf of the Federal Motor Carrier Safety Administration (FMCSA). The primary mission of the FMCSA is to...

Information Placement and Retrieval Through NHIN (InfoPRN)

DTIC Science & Technology

2011-05-01

and FISMA.  Dr. Steffensen will contact NMDS (Captain Bensic), JTF CapMed , and perhaps Kaiser Permanente to ascertain their interest in...activities, project stakeholders, critical project deliverables and milestones were defined and agreed upon. Therefore, the Integrated Master

Instructional Implications of Inquiry in Reading Comprehension.

ERIC Educational Resources Information Center

Snow, David

A contract deliverable on the NIE Communication Skills Project, this report consists of three separate documents describing the instructional implications of the analytic and empirical work carried out for the "Classroom Instruction in Reading Comprehension" part of the project: (1) Guidelines for Phrasal Segmentation; (2) Parsing Tasks…

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Technical Data 227.7103-6 Contract clauses. (a) Use the clause at 252.227-7013, Rights in Technical Data... technical data to the Government. Do not use the clause when the only deliverable items are computer...

Market Assessment For Traveler Services, A Choice Modeling Study Phase Iii, Fast-Trac Deliverable, #16B: Final Choice Modeling Report

DOT National Transportation Integrated Search

1999-02-12

FAST-TRAC : THIS REPORT DESCRIBES THE CHOICE MODEL STUDY OF THE FAST-TRAC (FASTER AND SAFER TRAVEL THROUGH TRAFFIC ROUTING AND ADVANCED CONTROLS) OPERATIONAL TEST IN SOUTHEAST MICHIGAN. CHOICE MODELING IS A STATED-PREFERENCE APPROACH IN WHICH RESP...

An evaluation of the emerging vaccines against influenza in children

PubMed Central

2013-01-01

Background Influenza is an under-appreciated cause of acute lower respiratory infections (ALRI) in children. It is estimated to cause approximately 20 million new episodes of ALRI in children annually, 97% of these occurring in developing countries. It is also estimated to result in 28000 to 112000 deaths annually in young children. Apart from hospitalisations and deaths, influenza has significant economic consequences. The current egg-based inactivated influenza vaccines have several limitations: annual vaccination, high production costs, and cannot respond adequately to meet the demand during pandemics. Methods We used a modified CHNRI methodology for setting priorities in health research investments. This was done in two stages. In Stage I, we systematically reviewed the literature related to emerging cross-protective vaccines against influenza relevant to several criteria of interest: answerability; cost of development, production and implementation; efficacy and effectiveness; deliverability, affordability and sustainability; maximum potential impact on disease burden reduction; acceptability to the end users and health workers; and effect on equity. In Stage II, we conducted an expert opinion exercise by inviting 20 experts (leading basic scientists, international public health researchers, international policy makers and representatives of pharmaceutical companies). They answered questions from the CHNRI framework and their “collective optimism” towards each criterion was documented on a scale from 0 to 100%. Results The experts expressed very high level of optimism for deliverability, impact on equity, and acceptability to health workers and end users. However, they expressed concerns over the criteria of answerability, low development cost, low product cost, low implementation cost, affordability and, to a lesser extent sustainability. In addition they felt that the vaccine would have higher efficacy and impact on disease burden reduction on overall influenza-associated disease rather than specifically influenza-associated pneumonia. Conclusion Although the landscape of emerging influenza vaccines shows several promising candidates, it is unlikely that the advancements in the newer vaccine technologies will be able to progress through to large scale production in the near future. The combined effects of continued investments in researching new vaccines and improvements of available vaccines will hopefully shorten the time needed to the development of an effective seasonal and pandemic influenza vaccine suitable for large scale production. PMID:24564565

An evaluation of the emerging vaccines against influenza in children.

PubMed

Nair, Harish; Lau, Eva; Brooks, W; Seong, Ang; Theodoratou, Evropi; Zgaga, Lina; Huda, Tanvir; Jadhav, Suresh S; Rudan, Igor; Campbell, Harry

2013-01-01

Influenza is an under-appreciated cause of acute lower respiratory infections (ALRI) in children. It is estimated to cause approximately 20 million new episodes of ALRI in children annually, 97% of these occurring in developing countries. It is also estimated to result in 28000 to 112000 deaths annually in young children. Apart from hospitalisations and deaths, influenza has significant economic consequences. The current egg-based inactivated influenza vaccines have several limitations: annual vaccination, high production costs, and cannot respond adequately to meet the demand during pandemics. We used a modified CHNRI methodology for setting priorities in health research investments. This was done in two stages. In Stage I, we systematically reviewed the literature related to emerging cross-protective vaccines against influenza relevant to several criteria of interest: answerability; cost of development, production and implementation; efficacy and effectiveness; deliverability, affordability and sustainability; maximum potential impact on disease burden reduction; acceptability to the end users and health workers; and effect on equity. In Stage II, we conducted an expert opinion exercise by inviting 20 experts (leading basic scientists, international public health researchers, international policy makers and representatives of pharmaceutical companies). They answered questions from the CHNRI framework and their "collective optimism" towards each criterion was documented on a scale from 0 to 100%. The experts expressed very high level of optimism for deliverability, impact on equity, and acceptability to health workers and end users. However, they expressed concerns over the criteria of answerability, low development cost, low product cost, low implementation cost, affordability and, to a lesser extent sustainability. In addition they felt that the vaccine would have higher efficacy and impact on disease burden reduction on overall influenza-associated disease rather than specifically influenza-associated pneumonia. Although the landscape of emerging influenza vaccines shows several promising candidates, it is unlikely that the advancements in the newer vaccine technologies will be able to progress through to large scale production in the near future. The combined effects of continued investments in researching new vaccines and improvements of available vaccines will hopefully shorten the time needed to the development of an effective seasonal and pandemic influenza vaccine suitable for large scale production.

Guide to conducting state recycling economic development finance workshops

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-12-31

The objective of this project was to demonstrate a two-pronged program for educating economic development and recycling officials about recycling business development opportunities. The project consisted of conducting a stat recycling finance workshop in each of three Northeastern states, as well as recycling economic development finance training program for the region`s economic development and recycling officials. The goal of the project is to facilitate the expansion of recycling businesses in the Northeast. The guide details seven steps to conducting a recycling economic development finance workshop: (1) establish a workshop planning committee, (2) select the target audience, (3) develop the workshopmore » message, (4) identify the message deliverer, (5) choose workshop topics and structure the workshop, (6) attract the audience, and (7) Conduct follow-up. In the process of planning and conducting the three state workshops for this project, NERC learned several important lessons: (1) Conduct workshops that are specific to the recycling and economic development programs in the state. (2) Include recycling business case studies on the workshop agenda. (3) Enhance the workshop with recycling economic development finance training. Develop a comprehensive marketing strategy.« less

Dosimetric quality, accuracy, and deliverability of modulated radiotherapy treatments for spinal metastases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kairn, Tanya, E-mail: t.kairn@gmail.com; School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane; Papworth, Daniel

2016-10-01

Cancer often metastasizes to the vertebra, and such metastases can be treated successfully using simple, static posterior or opposed-pair radiation fields. However, in some cases, including when re-irradiation is required, spinal cord avoidance becomes necessary and more complex treatment plans must be used. This study evaluated 16 sample intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) treatment plans designed to treat 6 typical vertebral and paraspinal volumes using a standard prescription, with the aim of investigating the advantages and limitations of these treatment techniques and providing recommendations for their optimal use in vertebral treatments. Treatment plan quality and beammore » complexity metrics were evaluated using the Treatment And Dose Assessor (TADA) code. A portal-imaging–based quality assurance (QA) system was used to evaluate treatment delivery accuracy, and radiochromic film measurements were used to provide high-resolution verification of treatment plan dose accuracy, especially in the steep dose gradient regions between each vertebral target and spinal cord. All treatment modalities delivered approximately the same doses and the same levels of dose heterogeneity to each planning target volume (PTV), although the minimum PTV doses in the vertebral plans were substantially lower than the prescription, because of the requirement that the plans meet a strict constraint on the dose to the spinal cord and cord planning risk volume (PRV). All plans met required dose constraints on all organs at risk, and all measured PTV-cord dose gradients were steeper than planned. Beam complexity analysis suggested that the IMRT treatment plans were more deliverable (less complex, leading to greater QA success) than the VMAT treatment plans, although the IMRT plans also took more time to deliver. The accuracy and deliverability of VMAT treatment plans were found to be substantially increased by limiting the number of monitor units (MU) per beam at the optimization stage, and thereby limiting beam modulation complexity. The VMAT arcs that were optimized with MU limitation had higher QA pass rates as well as higher modulation complexity scores (less complexity), lower modulation indices (less modulation), lower MU per beam, larger beam segments, and fewer small apertures than the VMAT arcs that were optimized without MU limitation. It is recommended that VMAT treatments for vertebral volumes, where the PTV abuts or surrounds the spinal cord, should be optimized with MU limitation. IMRT treatments may be preferable to the VMAT treatments, for dosimetry and deliverability reasons, but may be inappropriate for some patients because of their increased treatment delivery time.« less

SU-E-T-492: Influence of Clipping PTV in Build-Up Region On IMRT Plan Quality and Deliverability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, S; Manigandan, D; Sahai, P

2015-06-15

Purpose: To study the influence of clipping PTV from body contour on plan quality and deliverability in build-up region for superficial target. Methods: Five previously treated patients of post-operative carcinoma of parotid were re-planned for IMRT (6MV X-rays, sliding window technique, five fields and 60Gy/30 fractions) using eclipse treatment planning system (TPS) by keeping dose volume constraints and all other parameters constant, only PTV was clipped from body contour by 0mm, 1mm, 2mm and 3mm respectively. Planned fluence was transferred to previously scanned solid water phantom by placing I’matriXX array at 0.5cm depth (2mm slab+3mm inherent). Fluence was delivered bymore » Varian CL2300C/D linac at 99.5cm source to detector distance. Measured fluence was compared with TPS dose plane using 2D gamma evaluation using 3%/3mm DTA criteria. Total MU (monitor unit) required to deliver a plan was also noted. For plan quality, PTV, maximum-dose, minimum-dose, coverage index (CI=PTV volume covered by prescription dose/PTV) and heterogeneity index HI=D5/D95 were analyzed using dose volume histogram (DVH). Results: The Result of gamma function analysis for I’matriXX and TPS were 97.63±1.79%, 97.48±0.99, 98.08±0.89% and 98.01±0.78% at 0.5cm build-up depth for 0, 1, 2 and 3mm PTV clipping, respectively. I’matriXX measured dose was higher compared to TPS. Total MU required for delivering a plan were 552±61, 503±47, 436±24 and 407±22. Maximum-dose to PTV was 6635.80±62.01cGy, 6635.80±40.60cGy, 6608.43±51.07cGy and 6564.20±28.51cGy. Similarly, minimum-dose to PTV was 3306.23±458.56cGy, 3546.57±721.01cGy, 4591.43±298.81cGy and 4861.90±412.40cGy. CI was 0.9347±0.020, 0.9398±0.021, 0.9448±0.022 and 0.9481±0.021. Similarly, HI was 1.089±0.015, 1.084±0.014, 1.078±0.009 and 1.074±0.008 for 0, 1, 2 and 3mm PTV clipping, respectively. Conclusion: Gamma function analysis resulted in almost similar results. However, I’matriXX was overestimating the dose compared to TPS. MU required to deliver a plan decreases with increase in PTV clipping. CI, PTV minimum-dose and plan homogeneity increases with increase in PTV clipping from skin.« less

Identification and Analysis of National Airspace System Resource Constraints

NASA Technical Reports Server (NTRS)

Smith, Jeremy C.; Marien, Ty V.; Viken, Jeffery K.; Neitzke, Kurt W.; Kwa, Tech-Seng; Dollyhigh, Samuel M.; Fenbert, James W.; Hinze, Nicolas K.

2015-01-01

This analysis is the deliverable for the Airspace Systems Program, Systems Analysis Integration and Evaluation Project Milestone for the Systems and Portfolio Analysis (SPA) focus area SPA.4.06 Identification and Analysis of National Airspace System (NAS) Resource Constraints and Mitigation Strategies. "Identify choke points in the current and future NAS. Choke points refer to any areas in the en route, terminal, oceanic, airport, and surface operations that constrain actual demand in current and projected future operations. Use the Common Scenarios based on Transportation Systems Analysis Model (TSAM) projections of future demand developed under SPA.4.04 Tools, Methods and Scenarios Development. Analyze causes, including operational and physical constraints." The NASA analysis is complementary to a NASA Research Announcement (NRA) "Development of Tools and Analysis to Evaluate Choke Points in the National Airspace System" Contract # NNA3AB95C awarded to Logistics Management Institute, Sept 2013.

Simulation/Emulation Techniques: Compressing Schedules With Parallel (HW/SW) Development

NASA Technical Reports Server (NTRS)

Mangieri, Mark L.; Hoang, June

2014-01-01

NASA has always been in the business of balancing new technologies and techniques to achieve human space travel objectives. NASA's Kedalion engineering analysis lab has been validating and using many contemporary avionics HW/SW development and integration techniques, which represent new paradigms to NASA's heritage culture. Kedalion has validated many of the Orion HW/SW engineering techniques borrowed from the adjacent commercial aircraft avionics solution space, inserting new techniques and skills into the Multi - Purpose Crew Vehicle (MPCV) Orion program. Using contemporary agile techniques, Commercial-off-the-shelf (COTS) products, early rapid prototyping, in-house expertise and tools, and extensive use of simulators and emulators, NASA has achieved cost effective paradigms that are currently serving the Orion program effectively. Elements of long lead custom hardware on the Orion program have necessitated early use of simulators and emulators in advance of deliverable hardware to achieve parallel design and development on a compressed schedule.

Advanced Thermally Stable Jet Fuels Development Program Annual Report. Volume 1. Model and Experiment System Development

DTIC Science & Technology

1990-09-01

like to acknowledge R. J. Kottenstette, H. P. Stephens, D . M. Haaland, A . S. Geller, W. M. Trott, S. J. Martin, A . J. Lammie, B. J. Lammie, D . S. Blair...be expressed as F - D q?, where D is the diffusion coefficient, and q the scattering wave vector q- 4wnsin(8/2)/ A i, with n the liquid refractive...tubes C and D were generated using 11.4 mg/L JFA-5 added to the JP-8 fuel. The IR spectrum from tube A contained primarily a carbonate deposit with a

Updates to RDD control systems and rolling sensors.

DOT National Transportation Integrated Search

2016-07-01

TxDOT Project No. 5-6005-01, Statewide Implementation of Total Pavement Acceptance Device (TPAD), was completed on August 31, 2014. This deliverable discusses the improvements made to the RDD system on the TPAD. This work was performed from January 2...

IDC Reengineering Iteration I2 Architectural Prototype Reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamlet, Benjamin R.

To fulfill the inception phase deliverable “Demonstration of architectural prototype“ the SNL IDC Reengineering project team is providing seven reports describing system prototyping work completed between October 2012 and October 2014as part of the SNL US NDC Modernization project.

UAS Integration in the NAS Project Test Site Kick-off Meeting

NASA Technical Reports Server (NTRS)

Kopardekar, Parimal; Witzberger, Kevin; Hackenberg, Davis L.; Murphy, Jim

2015-01-01

This briefing was presented during the Test Site Kick Off Meeting to discuss the contract awards for Task 1 and Task 2. This briefing covered a high level overview for contract deliverables, Task 1 - UAS Traffic Management and Task 2, Live Virtual Constructive Distributed Environment.

Service Learning Projects in Online Courses: Delivery Strategies

ERIC Educational Resources Information Center

Hervani, Aref Agahei; Helms, Marilyn M.; Rutti, Raina M.; LaBonte, Joanne; Sarkarat, Sy

2015-01-01

As more college courses are taught online, maintaining course deliverables and learning to mirror face-to-face offerings is important to faculty, students, and accrediting agencies. Offering experiential and service learning is an increasingly important way to connect students to their local communities. This article presents a case study…

Incident Management, Fast-Trac, Phase Iib Deliverables, #20. The Model Analysis Report On The Benefits Of Scats In Alleviating The Impacts Of Incidents

DOT National Transportation Integrated Search

1996-01-01

FAST-TRAC : SELECTING THE MOST APPROPRIATE TRAFFIC CONTROL STRATEGY FOR INCIDENT CONGESTION MANAGEMENT CAN HAVE A MAJOR IMPACT ON THE EXTENT AND DURATION OF THE RESULTING CONGESTION. THIS RESEARCH INVESTIGATED THE EFFECTIVENESSES OF SEVERAL CONTRO...

An improved method for detection of Shiga toxin 2 in human serum

USDA-ARS?s Scientific Manuscript database

Shiga toxins (Stx) produced by Stx-producing Escherichia coli (STEC) are virulence factors that is most closely associated with hemolytic uremic syndrome (HUS), a life-threatening complication of intestinal infections by STEC. Stx have to enter into the circulation system before they can be delivere...

Highlights of X-Stack ExM Deliverable: MosaStore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ripeanu, Matei

2016-07-20

This brief report highlights the experience gained with MosaStore, an exploratory part of the X-Stack project “ExM: System support for extreme-scale, many-task applications”. The ExM project proposed to use concurrent workflows supported by the Swift language and runtime as an innovative programming model to exploit parallelism in exascale computers. MosaStore aims to support this endeavor by improving storage support for workflow-based applications, more precisely by exploring the gains that can be obtained from co-designing the storage system and the workflow runtime engine. MosaStore has been developed primarily at the University of British Columbia.

Vibration and Acoustic Test Facility (VATF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

Fantasia, Peter M.

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the VATF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Six-Degree-of-Freedom Dynamic Test System (SDTS) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Stokes, LeBarian

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the SDTS. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Materials and Nondestructive Evaluation Laboratoriers: User Test Planning Guide

NASA Technical Reports Server (NTRS)

Schaschl, Leslie

2011-01-01

The Materials and Nondestructive Evaluation Laboratory process, milestones and inputs are unknowns to first-time users. The Materials and Nondestructive Evaluation Laboratory Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware developers. It is intended to assist their project engineering personnel in materials analysis planning and execution. Material covered includes a roadmap of the analysis process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define scope of analysis, cost, and schedule are included as an appendix to the guide.

Specialized Environmental Chamber Test Complex: User Test Planning Guide

NASA Technical Reports Server (NTRS)

Montz, Michael E.

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the Specialized Environmental Test Complex. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Atmospheric Reentry Materials and Structures Evaluation Facility (ARMSEF). User Test Planning Guide

NASA Technical Reports Server (NTRS)

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ARMSEF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Energy Systems Test Area (ESTA) Battery Test Operations User Test Planning Guide

NASA Technical Reports Server (NTRS)

Salinas, Michael

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Battery Test Operations. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Electromagnetic Interference/Compatibility (EMI/EMC) Control Test and Measurement Facility: User Test Planning Guide

NASA Technical Reports Server (NTRS)

Scully, Robert C.

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the EMI/EMC Test Facility. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Cost and Schedule Analytical Techniques Development

NASA Technical Reports Server (NTRS)

1996-01-01

This Final Report summarizes the activities performed by Science Applications International Corporation (SAIC) for the base contract year from December 1, 1994 through November 30, 1995. The Final Report is in compliance with Paragraph 5 of Section F of the contract. This CSATD contract provides technical services and products to the NASA Marshall Space Flight Center's (MSFC) Engineering Cost Office (PP03) and the Program Plans and Requirements Office (PP02). Detailed Monthly Progress Reports were submitted to MSFC in accordance with the contract's Statement of Work Section IV "Reporting and Documentation". These reports spelled out each month's specific work accomplishments, deliverables submitted, major meetings held, and other pertinent information. This Final Report will summarize these activities at a higher level.

The Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2002-01-01

Future Mars missions require new capabilities that currently are not available. The Mars Technology Program (MTP) is an integral part of the Mars Exploration Program (MEP). Its sole purpose is to assure that required technologies are developed in time to enable the baselined and future missions. The MTP is a NASA-wide technology development program managed by JPL. It is divided into a Focused Program and a Base Program. The Focused Program is tightly tied to the proposed Mars Program mission milestones. It involves time-critical deliverables that must be developed in time for infusion into the proposed Mars 2005, and, 2009 missions. In addition a technology demonstration mission by AFRL will test a LIDAR as part of a joint NASNAFRL experiment. This program bridges the gap between technology and projects by vertically integrating the technology work with pre-project development in a project-like environment with critical dates for technology infusion. A Base Technology Program attacks higher riskhigher payoff technologies not in the critical path of missions.

Reservoir model for Hillsboro gas storage field management

USGS Publications Warehouse

Udegbunam, Emmanuel O.; Kemppainen, Curt; Morgan, Jim; ,

1995-01-01

A 3-dimensional reservoir model is used to understand the behavior of the Hillsboro Gas Storage Field and to investigate the field's performance under various future development. Twenty-two years of the gas storage reservoir history, comprising the initial gas bubble development and seasonal gas injection and production cycles, are examined with a full-field, gas water, reservoir simulation model. The results suggest that the gas-water front is already in the vicinity of the west observation well that increasing the field's total gas-in-place volume would cause gas to migrate beyond the east, north and west observation well. They also suggest that storage enlargement through gas injection into the lower layers may not prevent gas migration. Moreover, the results suggest that the addition of strategically-located new wells would boost the simulated gas deliverabilities.

Gap Analysis of Material Properties Data for Ferritic/Martensitic HT-9 Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Neil R.; Serrano De Caro, Magdalena; Rodriguez, Edward A.

2012-08-28

The US Department of Energy (DOE), Office of Nuclear Energy (NE), is supporting the development of an ASME Code Case for adoption of 12Cr-1Mo-VW ferritic/martensitic (F/M) steel, commonly known as HT-9, primarily for use in elevated temperature design of liquid-metal fast reactors (LMFR) and components. In 2011, Los Alamos National Laboratory (LANL) nuclear engineering staff began assisting in the development of a small modular reactor (SMR) design concept, previously known as the Hyperion Module, now called the Gen4 Module. LANL staff immediately proposed HT-9 for the reactor vessel and components, as well as fuel clad and ducting, due to itsmore » superior thermal qualities. Although the ASME material Code Case, for adoption of HT-9 as an approved elevated temperature material for LMFR service, is the ultimate goal of this project, there are several key deliverables that must first be successfully accomplished. The most important key deliverable is the research, accumulation, and documentation of specific material parameters; physical, mechanical, and environmental, which becomes the basis for an ASME Code Case. Time-independent tensile and ductility data and time-dependent creep and creep-rupture behavior are some of the material properties required for a successful ASME Code case. Although this report provides a cursory review of the available data, a much more comprehensive study of open-source data would be necessary. This report serves three purposes: (a) provides a list of already existing material data information that could ultimately be made available to the ASME Code, (b) determines the HT-9 material properties data missing from available sources that would be required and (c) estimates the necessary material testing required to close the gap. Ultimately, the gap analysis demonstrates that certain material properties testing will be required to fulfill the necessary information package for an ASME Code Case.« less

Evaluation of Used Fuel Disposition in Clay-Bearing Rock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jove-Colon, Carlos F.; Weck, Philippe F.; Hammond, Glenn Edward

Deep geological disposal of nuclear waste in clay/shale/argillaceous rock formations has received much consideration given its desirable attributes such as isolation properties (low permeability), geochemically reduced conditions, slow diffusion, sorbtive mineralogy, and geologically widespread (Jové Colón et al., 2014). There is a wealth of gained scientific expertise on the behavior of clay/shale/ argillaceous rock given its focus in international nuclear waste repository programs that includes underground research laboratories (URLs) in Switzerland, France, Belgium, and Japan. Jové Colón et al. (2014) have described some of these investigative efforts in clay rock ranging from site characterization to research on the engineered barriermore » system (EBS). Evaluations of disposal options that include nuclear waste disposition in clay/shale/argillaceous rock have determined that this host media can accommodate a wide range of waste types. R&D work within the Used Fuel Disposition Campaign (UFDC) assessing thermal effects and fluid-mineral interactions for the disposition of heat-generating waste have so far demonstrated the feasibility for the EBS and clay host rock to withstand high thermal loads. This report represents the continuation of disposal R&D efforts on the advancement and refinement of coupled Thermal-Hydrological-Mechanical-Chemical (THMC), hydrothermal experiments on clay interactions, used fuel degradation (source term), and thermodynamic modeling and database development. The development and implementation of a clay/shale/argillite reference case described in Jové Colón et al. (2014) for FY15 will be documented in another report (Mariner et al. 2015) – only a brief description will be given here. This clay reference case implementation is the result of integration efforts between the GDSA PA and disposal in argillite work packages. The assessment of sacrificial zones in the EBS is being addressed through experimental work along with 1D reactive-transport and reaction path modeling. The focus of these investigations into the nature of sacrificial zones is to evaluate the chemical effects of heterogeneous chemical reactions at EBS interfaces. The difference in barrier material types and the extent of chemical reactions within these interfacial domains generates changes in mineral abundances. These mineralogical alterations also result in volume changes that, although small, could affect the interface bulk porosity. As in previous deliverables, this report is structured according to various national laboratory contributions describing R&D activities applicable to clay/shale/argillite media.« less

Impact of Low Blood Lead Concentrations on IQ and School Performance in Chinese Children

PubMed Central

Liu, Jianghong; Li, Linda; Wang, Yingjie; Yan, Chonghuai; Liu, Xianchen

2013-01-01

Objectives Examine the relationships between blood lead concentrations and children's intelligence quotient (IQ) and school performance. Participants and Methods Participants were 1341 children (738 boys and 603 girls) from Jintan, China. Blood lead concentrations were measured when children were 3–5 years old. IQ was assessed using the Chinese version and norms of the Wechsler Preschool and Primary Scale of Intelligence – Revised when children were 6 years old. School performance was assessed by standardized city tests on 3 major subjects (Chinese, Math, and English [as a foreign language]) when children were age 8–10 years. Results Mean blood lead concentration was 6.43 µg/dL (SD = 2.64). For blood lead concentrations, 7.8% of children (n = 105) had ≥10.0 µg/dL, 13.8% (n = 185) had 8.0 to <10.0 µg/dL, and 78.4% (n = 1051) had <8.0 µg/dL. Compared to children with blood lead concentrations <8 µg/dL, those with blood lead concentrations ≥8 µg/dL scored 2–3 points lower in IQ and 5–6 points lower in school tests. There were no significant differences in IQ or school tests between children with blood lead concentrations groups 8–10 and ≥10 µg/dL. After adjustment for child and family characteristics and IQ, blood lead concentrations ≥10 µg/dL vs <8 µg/dL at ages 3–5 years was associated with reduced scores on school tests at age 8–10 years (Chinese, β = −3.54, 95%CI = −6.46, −0.63; Math, β = −4.63, 95%CI = −7.86, −1.40; English, β = −4.66, 95%CI = −8.09, −1.23). IQ partially mediated the relationship between elevated blood lead concentrations and later school performance. Conclusions Findings support that blood lead concentrations in early childhood, even <10 µg/dL, have a long-term negative impact on cognitive development. The association between blood lead concentrations 8–10 µg/dL and cognitive development needs further study in Chinese children and children from other developing countries. PMID:23734241

A novel system for constructing a recombinant highly-attenuated vaccinia virus strain (LC16m8) expressing foreign genes and its application for the generation of LC16m8-based vaccines against herpes simplex virus 2.

PubMed

Omura, Natsumi; Yoshikawa, Tomoki; Fujii, Hikaru; Shibamura, Miho; Inagaki, Takuya; Kato, Hirofumi; Egawa, Kazutaka; Harada, Shizuko; Yamada, Souichi; Takeyama, Haruko; Saijo, Masayuki

2018-04-27

A novel system was developed for generating a highly-attenuated vaccinia virus LC16m8 (m8, third generation smallpox vaccine) that expresses foreign genes. The innovations in this system are its excisable selection marker, specificity of the integration site of a gene of interest, and easy identification of clones with the fluorescent signal. Using this system, recombinant m8s, which expressed either herpes simplex virus 2 (HSV-2) glycoprotein B (gB)-, gD-, or both gB and gD (gB+gD) were developed, and their efficacy was evaluated. First, the induction of a specific IgG against these HSV-2 glycoproteins in mice infected with each of these recombinant m8s was confirmed with an immunofluorescence assay. Next, mice pre-infected with each of the recombinant m8s were infected with HSV-2 at the lethal dose to examine the vaccine efficacy. The fatality rate in mice pre-infected with either of the recombinant gB+gD- or gD-expressing m8s significantly decreased in comparison with that of the control. The survival rate in both male and female mice pre-infected with either of the recombinant gB+gD- and gD-expressing m8s increased to 100 % and 60 %, respectively, while most of the control mice died. In summary, this new system might be applicable for generating a novel m8-based vaccine.

How All Globalization is Local: Countervailing Forces and Their Influence on Higher Education Markets

ERIC Educational Resources Information Center

Douglass, John Aubrey

2005-01-01

Globalization trends and innovations in the instructional technologies are widely believed to be creating new markets and forcing a revolution in higher education. Much of the rhetoric of "globalists" provides a simplistic analysis of a paradigm shift in higher education (HE) markets and deliverables "(educational services)." This essay provides…

Tracking state deployments of commercial vehicle information systems and networks : 1998 Washington State report

DOT National Transportation Integrated Search

1999-12-01

Volume III of the Logical Architecture contract deliverable documents the Data Dictionary. This formatted version of the Teamwork model data dictionary is mechanically produced from the Teamwork CDIF (Case Data Interchange Format) output file. It is ...

TRMM Solar Array Panels

NASA Technical Reports Server (NTRS)

1998-01-01

This final report presents conclusions/recommendations concerning the TRMM Solar Array; deliverable list and schedule summary; waivers and deviations; as-shipped performance data, including flight panel verification matrix, panel output detail, shadow test summary, humidity test summary, reverse bias test panel; and finally, quality assurance summary.

Before And After Videotapes And Special Events Data, Preliminary Iib

DOT National Transportation Integrated Search

1994-08-25

TWO OF THE DELIVERABLES UNDER OUR SUB-CONTRACT WITH THE UNIVERSITY OF MICHIGAN WERE VIDEOTAPES OF THE BEFORE AND AFTER CONDITIONS AT SELECTED INTERSECTIONS, AND DATA FOR THE SPECIAL EVENT ANALYSIS. THESE DATA HAVE BEEN COLLECTED AND ARE MAINTAINED IN...

Consumer-Directed Goal Planning in the Delivery of Assistive Technology Services for People Who Are Ageing with Intellectual Disabilities

ERIC Educational Resources Information Center

Mirza, Mansha; Hammel, Joy

2009-01-01

Background: A consumer-directed service-delivery approach to assistive technology and environmental modification intervention was examined with people who were ageing with intellectual disabilities. Material and Methods: The intervention was based on a collaborative approach involving consumers, their social supports and service deliverers. Thirty…

Skynet Junior Scholars- Sharing the Universe with Blind/Low Vision Youth

NASA Astrophysics Data System (ADS)

Hoette, Vivian L.; Kron, R. G.; Meredith, K.; Heatherly, S.; Williamson, K.; Gurton, S.; Reichart, D.; Haislip, J.

2014-01-01

Skynet Junior Scholars, a new project funded by the National Science Foundation, aims to engage middle school youth including youth with visual and hearing impairments, in investigating the universe with the same tools professionals use. Project deliverables include: 1) Online access to optical and radio telescopes, data analysis tools, and professional astronomers, 2) An age-appropriate web-based interface for controlling remote telescopes, 3) Inquiry-based standards-aligned instructional modules. From an accessibility perspective, the goal of the Skynet Junior Scholars project is to facilitate independent access to the project deliverables to the greatest extent possible given existing accessibility technologies. In this paper we describe our experience in field-testing SJS activities with 29 blind/low vision youth attending a Lion’s Club summer camp. From our observations and preliminary results from pre/post surveys and interviews, we learned that rather than creating a new interest in STEM for these youth, we were instead helping the students satisfy an interest that they already had in these subjects, with our techniques allowing a first direct experience in observational astronomy.

The design and fabrication of a prototype trash compacting unit. [for long duration space missions

NASA Technical Reports Server (NTRS)

1973-01-01

A prototype trash compactor, that is compatible with the anticipated requirements of future long-term space missions, is described. Preliminary problem definition studies were conducted to identify typical types and quantities of waste materials to be expected from a typical mission. Bench-scale compaction tests were then conducted on typical waste materials to determine force/compaction curves. These data were used to design a boilerplate compactor that was fabricated to prove the feasibility of the basic design concept. A final design was then prepared from which the deliverable unit was fabricated. Design concepts are presented for suggested further development of the compactor, including a version that is capable of handling wet biodegradable wastes.

Natural gas storage in bedded salt formations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macha, G.

1996-09-01

In 1990 Western Resources Inc. (WRI) identified the need for additional natural gas storage capacity for its intrastate natural gas system operated in the state of Kansas. Western Resources primary need was identified as peak day deliverability with annual storage balancing a secondary objective. Consequently, an underground bedded salt storage facility, Yaggy Storage Field, was developed and placed in operation in November 1993. The current working capacity of the new field is 2.1 BCF. Seventy individual caverns are in service on the 300 acre site. The caverns vary in size from 310,000 CF to 2,600,000 CF. Additional capacity can bemore » added on the existing acreage by increasing the size of some of the smaller existing caverns by further solution mining and by development of an additional 30 potential well sites on the property.« less

Delivering a quality-assured fracture liaison service in a UK teaching hospital-is it achievable?

PubMed

Shipman, K E; Stammers, J; Doyle, A; Gittoes, N

2016-10-01

To determine whether new national guidance on the specifications of a fracture liaison service are realistically deliverable, 1 year of data on the performance of such a service were audited. Audit targets were mostly met. This audit demonstrates that these standards are deliverable in a real world setting. UK service specifications for a fracture liaison service (FLS) have been produced (National Osteoporosis Society, NOS) to promote effective commissioning and delivery of the highest quality care to patients with fragility fractures. How deliverable these standards are has not as yet been methodically reported. Our FLS was modelled on the ten NOS standards; performance was audited after 1 year to determine whether these standards could be delivered and to describe the lessons learnt. Performance was audited against the NOS FLS Service Standards, with management based on the Fracture Risk Assessment Tool (FRAX®), the four-item Falls Risk Assessment Tool (FRAT), National Institute for Health and Care Excellence (NICE) and the National Osteoporosis Guideline Groups (NOGG) guidance. Data were recorded prospectively on a database. The FLS commenced in May 2014, was fully operational in August 2014 and data were captured from 1 September 2014 to 1 September 2015. The FLS detected 1773 patients and standards were largely achieved. Most, 94 %, patients were seen within 6 weeks, 533 DXA requests were generated, 804 outpatient FRAT assessments were recorded (134 required falls intervention) and 773 patients had bone treatments started. On follow-up at 3 months, between 78-79 % were still taking medication. Preliminary evaluation of a FLS implemented according to UK NOS standards demonstrates that the model is practical to apply to a large teaching hospital population. Collection and review of outcome and cost effectiveness data is required to determine the performance of this model in comparison with existing models.

Skynet Junior Scholars- Sharing the Universe with Blind/Low Vision Youth

NASA Astrophysics Data System (ADS)

Meredith, Kate K.; Hoette, Vivian; Kron, Richard; Heatherly, Sue Ann; Williamson, Kathryn; Gurton, Suzanne; Haislip, Josh; Reichart, Dan

2015-08-01

Skynet Junior Scholars, a project funded by the National Science Foundation, aims to engage middle school youth including youth with visual and hearing impairments in investigating the universe with the same tools professionals use. Project deliverables include: 1) Online access to optical and radio telescopes, data analysis tools, and professional astronomers, 2) An age-appropriate web-based interface for controlling remote telescopes, 3) Inquiry-based standards-aligned instructional modules. From an accessibility perspective, the goal of the Skynet Junior Scholars project is to facilitate independent access to the project deliverables to the greatest extent possible given existing accessibility technologies. In this poster we describe our experience in field-testing SJS activities with 29 blind/low vision youth attending a Lion’s Club summer camp. From our observations and preliminary results from pre and post surveys and interviews, we learned that rather than creating a new interest in STEM, we were instead nourishing pre-existing interest giving students their first direct experience in observational astronomy. Additional accessibility features have been added to the SJS program since the initial pilot testing. Full testing is scheduled for July 2015.

Vitamin D(2) supplementation induces the development of aortic stenosis in rabbits: interactions with endothelial function and thioredoxin-interacting protein.

PubMed

Ngo, Doan T M; Stafford, Irene; Kelly, Darren J; Sverdlov, Aaron L; Wuttke, Ronald D; Weedon, Helen; Nightingale, Angus K; Rosenkranz, Anke C; Smith, Malcolm D; Chirkov, Yuliy Y; Kennedy, Jennifer A; Horowitz, John D

2008-08-20

Understanding of the pathophysiology of aortic valve stenosis (AVS) and finding potentially effective treatments are impeded by the lack of suitable AVS animal models. A previous study demonstrated the development of AVS in rabbits with vitamin D(2) and cholesterol supplementation without any hemodynamic changes in the cholesterol supplemented group alone. The current study aimed to determine whether AVS develops in an animal model with vitamin D(2) supplementation alone, and to explore pathophysiological mechanisms underlying this process. The effects of 8 weeks' treatment with vitamin D(2) alone (n=8) at 25,000 IU/4 days weekly on aortic valve structure and function were examined in male New Zealand white rabbits. Echocardiographic aortic valve backscatter (AV(BS)), transvalvular velocity, and transvalvular pressure gradient were utilized to quantitate changes in valve structure and function. Valvular histology/immunochemistry and function were examined after 8 weeks. Changes in valves were compared with those in endothelial function and in valvular measurement of thioredoxin-interacting protein (TXNIP), a marker/mediator of reactive oxygen species-induced oxidative stress. Vitamin D(2) treated rabbits developed AVS with increased AV(BS) (17.6+/-1.4 dB vs 6.7+/-0.8 dB, P<0.0001), increased transvalvular velocity and transvalvular pressure gradient (both P<0.01 via 2-way ANOVA) compared to the control group. There was associated valve calcification, lipid deposition and macrophage infiltration. Endothelial function was markedly impaired, and intravalvular TXNIP concentration increased. In this model, vitamin D(2) induces the development of AVS with histological features similar to those of early AVS in humans and associated endothelial dysfunction/redox stress. AVS development may result from the loss of nitric oxide suppression of TXNIP expression.

A Novel Inherently Radiopaque Bead for Transarterial Embolization to Treat Liver Cancer - A Pre-clinical Study.

PubMed

Duran, Rafael; Sharma, Karun; Dreher, Matthew R; Ashrafi, Koorosh; Mirpour, Sahar; Lin, MingDe; Schernthaner, Ruediger E; Schlachter, Todd R; Tacher, Vania; Lewis, Andrew L; Willis, Sean; den Hartog, Mark; Radaelli, Alessandro; Negussie, Ayele H; Wood, Bradford J; Geschwind, Jean-François H

2016-01-01

Embolotherapy using microshperes is currently performed with soluble contrast to aid in visualization. However, administered payload visibility dimishes soon after delivery due to soluble contrast washout, leaving the radiolucent bead's location unknown. The objective of our study was to characterize inherently radiopaque beads (RO Beads) in terms of physicomechanical properties, deliverability and imaging visibility in a rabbit VX2 liver tumor model. RO Beads, which are based on LC Bead® platform, were compared to LC Bead. Bead size (light microscopy), equilibrium water content (EWC), density, X-ray attenuation and iodine distribution (micro-CT), suspension (settling times), deliverability and in vitro penetration were investigated. Fifteen rabbits were embolized with either LC Bead or RO Beads + soluble contrast (iodixanol-320), or RO Beads+dextrose. Appearance was evaluated with fluoroscopy, X-ray single shot, cone-beam CT (CBCT). Both bead types had a similar size distribution. RO Beads had lower EWC (60-72%) and higher density (1.21-1.36 g/cc) with a homogeneous iodine distribution within the bead's interior. RO Beads suspension time was shorter than LC Bead, with durable suspension (>5 min) in 100% iodixanol. RO Beads ≤300 µm were deliverable through a 2.3-Fr microcatheter. Both bead types showed similar penetration. Soluble contrast could identify target and non-target embolization on fluoroscopy during administration. However, the imaging appearance vanished quickly for LC Bead as contrast washed-out. RO Beads+contrast significantly increased visibility on X-ray single shot compared to LC Bead+contrast in target and non-target arteries (P=0.0043). Similarly, RO beads demonstrated better visibility on CBCT in target arteries (P=0.0238) with a trend in non-target arteries (P=0.0519). RO Beads+dextrose were not sufficiently visible to monitor embolization using fluoroscopy. RO Beads provide better conspicuity to determine target and non-target embolization compared to LC Bead which may improve intra-procedural monitoring and post-procedural evaluation of transarterial embolization.

Fabrication of Co3O4 mesoporous thin films by using cobalt/chitosan precursor on fluorine-doped tin oxide glass

NASA Astrophysics Data System (ADS)

Yang, Hui-Chia; Tsai, Jung-Che

2017-06-01

For the development of high-performance and low-cost electrode materials, many alternative materials have been fabricated by various groups. Among these materials, Co3O4 has been demonstrated to be a promising candidate for pseudocapacitors because of its low potential environmental pollution, low cost, and extremely high theoretical specific capacitance. Chitosan, a linear polysaccharide produced by the deacetylation of chitin, is a nontoxic, tissue-compatible polymeric biomaterial. It is usually used to eliminate or filter the heavy metals in wastewater. That is, chitosan can act as a deliverer of metal ions and a nanostructure constructer of metals (or metal oxides). In this study, a facile approach is developed to synthesize mesoporous cobalt oxide thin films on fluorine-doped tin oxide (FTO)-coated glass with environmentally friendly chitosan, which chelates cobalt ions.

Enhancing user acceptance of mandated mobile health information systems: the ePOC (electronic point-of-care project) experience.

PubMed

Burgess, Lois; Sargent, Jason

2007-01-01

From a clinical perspective, the use of mobile technologies, such as Personal Digital Assistants (PDAs) within hospital environments is not new. A paradigm shift however is underway towards the acceptance and utility of these systems within mobile-based healthcare environments. Introducing new technologies and associated work practices has intrinsic risks which must be addressed. This paper contends that intervening to address user concerns as they arise throughout the system development lifecycle will lead to greater levels of user acceptance, while ultimately enhancing the deliverability of a system that provides a best fit with end user needs. It is envisaged this research will lead to the development of a formalised user acceptance framework based on an agile approach to user acceptance measurement. The results of an ongoing study of user perceptions towards a mandated electronic point-of-care information system in the Northern Illawarra Ambulatory Care Team (TACT) are presented.

Use of Life Cycle Costing in the Development of Standards

DTIC Science & Technology

1988-12-01

Bringhurst, Mountain Fuel Supply 6. T. Joseph Cardenas, McGraw Hill 7. Sally A. Hooks, EEI 8. Merle F. McBride, Owens - Corning Fiberglas 9. Kenneth D...Stanonik, GAMA 23. Clifford D. Smith, Owens - Corning Fiberglas 24. Chris Thomaidis, Department of Housing & Urban Development 25. Adrian Tuluca, Steven...Professionals, McGraw-Hill Book Company, 1981. 8. Stewart, Rodney D., Cost EstimatinQ, John Wiley & Sons, Inc., 1982. 9. Owens Corning , Telephone

The National Shipbuilding Research Program. Application of Industrial Engineering Techniques to Reduce Workers’ Compensation and Environmental Costs - Deliverable F

DTIC Science & Technology

1999-10-01

body size, pre-existing medical conditions, medication and sedentary lifestyle . Team members learned from professional speakers and other training...for the retired military employee who may lead a more " sedentary lifestyle ". Smoking and overeating are also negative factors that increase the

Interventions Provided by Parents for Children with Intellectual Disabilities in Low and Middle Income Countries

ERIC Educational Resources Information Center

Einfeld, Stewart L.; Stancliffe, Roger J.; Gray, Kylie M.; Sofronoff, Kate; Rice, Lauren; Emerson, Eric; Yasamy, M. T.

2012-01-01

Background: In low- and middle-income (LAMI) countries, there is a lack of well-trained therapists to provide specialist interventions for children with intellectual disabilities and their families. We sought to identify strategies deliverable by families or non-specialist workers. Materials and Methods: After searches of appropriate scientific…

76 FR 13612 - Freebird Gas Storage, LLC; Notice of Request Under Blanket Authorization

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... Storage, LLC; Notice of Request Under Blanket Authorization Take notice that on March 1, 2011, Freebird Gas Storage, LLC (Freebird) filed a Prior Notice Request pursuant to sections 157.205 and 157.208 of... blanket certificate for authorization to increase the storage capacity and deliverability at its East...

Demonstrating a Situated Learning Approach for In-Service Teacher Education in Rural India: The Quality Education Programme in Rajasthan

ERIC Educational Resources Information Center

Saigal, Anju

2012-01-01

Recent educational policy in India has repositioned elementary school teachers as active, reflective practitioners, not just "deliverers" of syllabus material. This article examines innovations in teacher support in Rajasthan's government schools through the "Quality Education Program." Drawing on qualitative research of…

Inservice Education and the 6 O'Clock News. OSSC Bulletin Vol. 21, No. 7.

ERIC Educational Resources Information Center

Arends, Richard; And Others

Several assumptions currently held by many inservice planners and deliverers are presented and challenged. A new model of inservice programs is outlined that pays attention to the characteristics of maturing and growing professional educators and that demands new forms for delivering inservice to individuals and school clients. Inservice delivery…

Dynamics explorer: Interface definition study, volume 1

NASA Technical Reports Server (NTRS)

1978-01-01

Work done in response to the work statement wherein a specific deliverable was not identified but where design and analysis tasks were identified is reported. The summary and baseline change list is included along with design notes for the spacecraft system, thermal subsystem, power subsystem, communications subsystem, plasma wave instrument interface definition, and the structure.

Data Acquisition System(DAS) Sustaining Engineering

NASA Technical Reports Server (NTRS)

1998-01-01

This paper presents general information describing the Data Acquisition System contract, a summary of objectives, tasks performed and completed. The hardware deliverables which are comprised of: 1) Two ground DAS units; 2) Two flight DAS units; 3) Logistic spares; and 4) Shipping containers are described. Also included are the data requirements and scope of the contract.

Plug-in hybrid electric vehicle value proposition study. Phase 1, task 2, select value proposition/business model for further study

DOT National Transportation Integrated Search

2008-04-01

The objective of Task 2 is to identify the combination of value propositions that is : believed to be achievable by 2030 and collectively hold promise for a sustainable : PHEV market by 2030. This deliverable outlines what the project team (with inpu...

76 FR 66685 - President's Export Council Subcommittee on Export Administration; Notice of Open Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... public. 4. Review of Deliverables for the PEC. 5. Discussion of 2012 Workplan. 6. Subcommittee Breakout... which the United States has diplomatic or trading relations and of controlling trade for national....gov , no later than, November 7, 2011. A limited number of seats will be available for the public...

Visualizing the Future of Research on Post Secondary Correctional Education: Designs, Data, and Deliverables

ERIC Educational Resources Information Center

Wheeldon, J.

2011-01-01

Providing post-secondary education in correctional settings has emerged as one of the best ways to reduce recidivism, save taxpayer dollars, and promote post release employment and community reintegration. While a number of studies exist, this paper argues persistent challenges connected to research design, data collection, and the communication…

EBR-II Data Digitization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoon, Su-Jong; Rabiti, Cristian; Sackett, John

2014-08-01

1. Objectives To produce a validation database out of those recorded signals it will be necessary also to identify the documents need to reconstruct the status of reactor at the time of the beginning of the recordings. This should comprehends the core loading specification (assemblies type and location and burn-up) along with this data the assemblies drawings and the core drawings will be identified. The first task of the project will be identify the location of the sensors, with respect the reactor plant layout, and the physical quantities recorded by the Experimental Breeder Reactor-II (EBR-II) data acquisition system. This firstmore » task will allow guiding and prioritizing the selection of drawings needed to numerically reproduce those signals. 1.1 Scopes and Deliverables The deliverables of this project are the list of sensors in EBR-II system, the identification of storing location of those sensors, identification of a core isotopic composition at the moment of the start of system recording. Information of the sensors in EBR-II reactor system was summarized from the EBR-II system design descriptions listed in Section 1.2.« less

Student Self-Efficacy in Introductory Project-Based Learning Courses

NASA Astrophysics Data System (ADS)

Pleiss, Geoffrey; Zastavker, Yevgeniya V.

2012-02-01

This study investigates first-year engineering students' self-efficacy in two introductory Project-Based Learning (PjBL) courses -- Physics (Mechanics) Laboratory and Engineering Design -- taught at a small technical institution. Twelve students participated in semi-structured open-ended interviews about their experiences in both courses. Analysis was performed using grounded theory. Results indicate that students had lower self-efficacy in Physics Lab than in Engineering Design. In Physics Lab, students reported high levels of faculty-supported scaffolding related to final project deliverables, which in turn established perceptions of an outcome-based course emphasis. Conversely, in Engineering Design, students observed high levels of scaffolding related to the intermediate project deliverables, highlighting process-centered aspects of the course. Our analyses indicate that this difference in student perceptions of course emphases -- resulting from the differences in scaffolding -- is a primary factor for the discrepancy in self-efficacy between Physics Lab and Engineering Design. Future work will examine how other variables (e.g., academic background, perception of community, gender) affect students' self-efficacy and perception of scaffolding in these PjBL courses.

Electromagnetic compatibility (EMC) assurance of automotive signal/data transmission for vehicle transportation systems.

DOT National Transportation Integrated Search

2012-03-31

This report is the final report of the Center for Transportation & Materials Engineering (CTME) research project funded by the grant (Grant Number: G00000245). The report is submitted to Director of CTME for partial fulfillment for the deliverables o...

48 CFR 314.103 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACT TYPES SEALED BIDDING Use of Sealed Bidding 314.103 Policy. EIT products and services, including EIT deliverables such as electronic documents and reports, acquired using sealed-bid procedures shall... determinations for EIT products and services that do not meet some or all of the applicable Section 508...

48 CFR 211.274-6 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Contract clauses. 211.274-6 Section 211.274-6 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... subassemblies, components, or parts embedded within deliverable items. (4) Use the clause with its Alternate I...

48 CFR 211.274-6 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Contract clauses. 211.274-6 Section 211.274-6 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... subassemblies, components, or parts embedded within deliverable items. (4) Use the clause with its Alternate I...

48 CFR 3452.224-70 - Release of information under the Freedom of Information Act.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: (1) Unit prices, including labor rates; (2) Statements of Work/Performance Work Statements generated by the contractor; (3) Performance requirements, including incentives, performance standards, quality levels, and service level agreements; (4) Reports, deliverables, and work products delivered in...

48 CFR 3452.224-70 - Release of information under the Freedom of Information Act.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: (1) Unit prices, including labor rates; (2) Statements of Work/Performance Work Statements generated by the contractor; (3) Performance requirements, including incentives, performance standards, quality levels, and service level agreements; (4) Reports, deliverables, and work products delivered in...

48 CFR 3452.224-70 - Release of information under the Freedom of Information Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: (1) Unit prices, including labor rates; (2) Statements of Work/Performance Work Statements generated by the contractor; (3) Performance requirements, including incentives, performance standards, quality levels, and service level agreements; (4) Reports, deliverables, and work products delivered in...

Program for refan JT8D engine design, fabrication and test, phase 2

NASA Technical Reports Server (NTRS)

Glass, J. A.; Zimmerman, E. S.; Scaramella, V. M.

1975-01-01

The objective of the JT8D refan program was to design, fabricate, and test certifiable modifications of the JT8D engine which would reduce noise generated by JT8D powered aircraft. This was to be accomplished without affecting reliability and maintainability, at minimum retrofit cost, and with no performance penalty. The mechanical design, engine performance and stability characteristics at sea-level and altitude, and the engine noise characteristics of the test engines are documented. Results confirmed the structural integrity of the JT8D-109. Engine operation was stable throughout the airplane flight envelope. Fuel consumption of the test engines was higher than that required to meet the goal of no airplane performance penalty, but the causes were identified and corrected during a normal pre-certification engine development program. Compared to the baseline JT8D-109 engine, the acoustically treated JT8D-109 engine showed noise reductions of 6 PNdB at takeoff and 11 PNdB at a typical approach power setting.

A Learning Style Comparison between Synchronous Online and Face-to-Face Engineering Graphics Instruction

ERIC Educational Resources Information Center

Goodridge, Wade H.; Lawanto, Oenardi; Santoso, Harry B.

2017-01-01

The implementation of a successful engineering program to a synchronous online curriculum is subject to many impacting factors. One such factor, that has not seen much investigation, concerns learning styles. Student learning styles may have a dramatic influence on the success of a synchronous online deliverable engineering graphics curriculum.…

The Benefits of Early Book Sharing (BEBS) for child cognitive and socio-emotional development in South Africa: study protocol for a randomised controlled trial.

PubMed

Dowdall, Nicholas; Cooper, Peter J; Tomlinson, Mark; Skeen, Sarah; Gardner, Frances; Murray, Lynne

2017-03-09

Children in low and middle-income countries (LMICs) are at risk for problems in their cognitive, social and behavioural development. Factors such as a lack of cognitive stimulation, harsh parenting practices, and severe and persistent aggression in early childhood are central to the genesis of these problems. Interventions that target the intersection between early childhood development, parenting, and early violence prevention are required in order to meaningfully address these problems. We are conducting a randomised controlled trial to evaluate a parenting intervention for caregivers of children aged between 23 and 27 months, designed to promote child cognitive and socioemotional development in Khayelitsha, a low-income peri-urban township in South Africa. Families are randomly allocated to a book-sharing intervention group or to a wait-list control group. In the intervention, we train caregivers in supportive book-sharing with young children. Training is carried out in small groups over a period of 8 weeks. Data are collected at baseline, post intervention and at 6 months post intervention. In addition to targeting child cognitive development, the intervention aims to improve child socioemotional functioning. The Benefits of Early Book Sharing (BEBS) trial aims to evaluate the impact of an early parenting intervention on several key risk factors for the development of violence, including aspects of parenting and child cognition, prosocial behaviour, aggression, and socioemotional functioning. The study is being carried out in a LMIC where violence constitutes a major social and health burden. Since the intervention is brief and, with modest levels of training, readily deliverable in LMIC contexts, a demonstration that it is of benefit to both child cognitive and socioemotional development would be of significance. The BEBS trial is registered on the International Standard Randomised Controlled Trial Number database, registration number ISRCTN71109104 . Registered on 9 February 2016. This is version 1 of the protocol for the BEBS trial.

a Novel Method for Automation of 3d Hydro Break Line Generation from LIDAR Data Using Matlab

NASA Astrophysics Data System (ADS)

Toscano, G. J.; Gopalam, U.; Devarajan, V.

2013-08-01

Water body detection is necessary to generate hydro break lines, which are in turn useful in creating deliverables such as TINs, contours, DEMs from LiDAR data. Hydro flattening follows the detection and delineation of water bodies (lakes, rivers, ponds, reservoirs, streams etc.) with hydro break lines. Manual hydro break line generation is time consuming and expensive. Accuracy and processing time depend on the number of vertices marked for delineation of break lines. Automation with minimal human intervention is desired for this operation. This paper proposes using a novel histogram analysis of LiDAR elevation data and LiDAR intensity data to automatically detect water bodies. Detection of water bodies using elevation information was verified by checking against LiDAR intensity data since the spectral reflectance of water bodies is very small compared with that of land and vegetation in near infra-red wavelength range. Detection of water bodies using LiDAR intensity data was also verified by checking against LiDAR elevation data. False detections were removed using morphological operations and 3D break lines were generated. Finally, a comparison of automatically generated break lines with their semi-automated/manual counterparts was performed to assess the accuracy of the proposed method and the results were discussed.

Feasibility study from a randomized controlled trial of standard closure of a stoma site vs biological mesh reinforcement.

PubMed

2016-09-01

Hernia formation occurs at closed stoma sites in up to 30% of patients. The Reinforcement of Closure of Stoma Site (ROCSS) randomized controlled trial is evaluating whether placement of biological mesh during stoma closure safely reduces hernia rates compared with closure without mesh, without increasing surgical or wound complications. This paper aims to report recruitment, deliverability and safety from the internal feasibility study. A multicentre, patient and assessor blinded, randomized controlled trial, delivered through surgical trainee research networks. A 90-patient internal feasibility study assessed recruitment, randomization, deliverability and early (30 day) safety of the novel surgical technique (ClinicalTrials.gov registration number NCT02238964). The feasibility study recruited 90 patients from the 104 considered for entry (45 to mesh, 45 to no mesh). Seven of eight participating centres randomized patients within 30 days of opening. Overall, 41% of stomas were created for malignant disease and 73% were ileostomies. No mesh-specific complications occurred. Thirty-one postoperative adverse events were experienced by 31 patients, including surgical site infection (9%) and postoperative ileus (6%). One mesh was removed for re-access to the abdominal cavity, for reasons unrelated to the mesh. Independent review by the Data Monitoring and Ethics Committee of adverse event data by treatment allocation found no safety concerns. Multicentre randomization to this trial of biological mesh is feasible, with no early safety concerns. Progression to the full Phase III trial has continued. ROCSS shows that trainee research networks can efficiently develop and deliver complex interventional surgical trials. Colorectal Disease © 2016 The Association of Coloproctology of Great Britain and Ireland.

Flexible long-chain-linker constructed Ni-based metal-organic frameworks with 1D helical channel and their pseudo-capacitor behavior studies

NASA Astrophysics Data System (ADS)

Wang, Kuaibing; Wang, Zikai; Wang, Xin; Zhou, Xueqin; Tao, Yuehong; Wu, Hua

2018-02-01

Two novel and isostructural Ni-based MOFs with topological symbol of 422·54·62, namely [Ni2(TATB)2(L)2(H2O)], have successfully synthesized, where L is the flexibly N-donor bid (1,10-bisimidazoledecane) or btd (1,10-bistriazoledecane) linker and TATB is the deprotonation mode from 4,4‧,4″-s-triazine-2,4,6-triyl-tribenzoic acid (H3TATB). Two types of left- and right-handed helical channels with mean diameter of 11 Å results in large void space in 3D network. When directly use as electrode materials, the as-synthesized Ni-MOFs single-crystal electrodes behave as pseudo-capacitor and deliver high gravimetric capacitance with superior energy deliverable ability and cycling stability. For example, the maximum gravimetric capacitance is 705 F g-1 with the energy density of 29.6 Wh kg-1 at a current density of 1 A g-1. Even after 5000 continuous cycles, the capacitance retention maintains at 92.1%. The good electrochemical performance should be ascribed to the 1D helical channels facilitating the diffusion of OH-. Furthermore, the low bulk solution (0.46 and 0.50 Ω) and charge-transfer resistances accelerate the contact between OH- and active species in the electrode, and consequently result in efficiency Faradaic reaction. This work opens a new way for the directly application of 3D topological MOFs single-crystal with novel interior structures especially porous and channel-like architectures in electronic energy storage field.

360-Degree Rhetorical Analysis of Job Hunting: A Four-Part, Multimodal Project

ERIC Educational Resources Information Center

Ding, Huiling; Ding, Xin

2013-01-01

This article proposes the use of a four-component multimodal employment project that offers students a 360-degree understanding of the rhetorical situations surrounding job searches. More specifically, we argue for the use of the four deliverables of written resumes and cover letters, mock oral onsite interview, video resume analysis, and peer…

MED-SUV final strategic issues

NASA Astrophysics Data System (ADS)

Spampinato, Letizia; Puglisi, Giuseppe; Sangianantoni, Agata

2016-04-01

Aside the scientific, technical and financial aspects managed by the "Project Management" Work Package (WP1), the great challenge and more time consuming task of this WP has surely been the definition and application of some strategic guidelines crucial to trace the project right path to its final success and for the project outcome sustainability after month 36. In particular, given that one of the main objectives of MED-SUV is that to be compliant with the GEO initiative, particularly concerning the data sharing, great efforts have been made by WP1 at first to define the MED-SUV Data Policy Guidelines, and currently to make it suitable for the EU Supersites. At present, WP1 is also dealing with the exploitation of the achieved foreground among the project's participant and to define a Memorandum of Understanding to sustain the monitoring systems and e-infrastructure developed in the project framework. Whilst the Data Policy guidelines document was implemented in the first year of MED-SUV, WP1 is now focused on the last deliverable 'Strategic and Legal deliverables', which includes the remaining issues. To the aim, WP1 has strategically separated the Exploitation of Foreground document preparation from the Memorandum of Understanding definition. The Exploitation of Foreground process has regarded the identification of Foreground, the exploitable results, the purpose of such Foreground, the collection of information from either the scientific community of MED-SUV or industrial participants; to this aim WP1 circulated an ad hoc questionnaire to put together information on (the) every kind of MED-SUV outcome, on their owners, on the kind of ownership (single/joint), on the outcome exploitation, and on proposals for its sustainability. While the first information will allow us to prepare the final Exploitation Agreement among the project's participant, the information on the exploitation of the outcome and likely sustainability proposals will contribute to the definition of the project Memorandum of Understanding for the maintenance of the developed instrumentation and of the MED-SUV e-infrastructure following the project end.

Pollution reduction technology program for class T4(JT8D) engines

NASA Technical Reports Server (NTRS)

Roberts, R.; Fiorentino, A. J.; Diehl, L. A.

1977-01-01

The technology required to develop commercial gas turbine engines with reduced exhaust emissions was demonstrated. Can-annular combustor systems for the JT8D engine family (EPA class T4) were investigated. The JT8D turbofan engine is an axial-flow, dual-spool, moderate-bypass-ratio design. It has a two-stage fan, a four-stage low-pressure compressor driven by a three-stage low-pressure turbine, and a seven-stage high-pressure compressor driven by a single-stage high-pressure turbine. A cross section of the JT8D-17 showing the mechanical configuration is given. Key specifications for this engine are listed.

Incident management under SCAT adaptive control system : FAST-TRAC phase III deliverable. #11, Final report on incident management under SCATS adaptive control system

DOT National Transportation Integrated Search

1998-04-01

The report documents the results of a study designed to test the effectiveness of ATMS and ATIS strategies to reduce delay resulting from an incident. The study had two main sections: a simulation study to test the effectiveness of several control st...

Deliverance from the "Dark Night of the Soul"

ERIC Educational Resources Information Center

Kinnier, Richard T.; Dixon, Andrea L.; Scheidegger, Corey; Lindberg, Brent

2009-01-01

For many individuals, spiritual inspiration, clarity, or epiphany is often preceded by a "dark night of the soul". St. John of the Cross, a Spanish mystic of the 16th century, first described the concept. Today, the phrase "dark night of the soul" is usually associated with the crisis part of the journey to enlightenment. This article defines and…

Formation and Assessment of a Tool to Evaluate STEM Literacy in Service-Learning Projects

ERIC Educational Resources Information Center

Hayford, Barbara; Blomstrom, Sally; Mumpower, Lori

2015-01-01

The purpose of the authors' research was to create a tool to evaluate science, technology, engineering, and mathematics (STEM) literacy in service-learning projects. The researchers posited that components of service-learning, which in this case included the deliverable and reflections, are examples of fundamental STEM literacy and thus can be…

Final report on the analyses of traffic accidents : Fast-Trac--phase 3, deliverable. Semi-annual reports on total accidents : trends, types and analysis of before and after studies

DOT National Transportation Integrated Search

1996-12-01

This report contains the results of an analysis of : traffic accidents in the City of Troy, Michigan, where : the Sydney Coordinated Adaptive Traffic System : (SCATS) was deployed as part of a federal demonstration : program. The analyses includes a ...

Enhancing Project-Based Learning in Software Engineering Lab Teaching through an E-Portfolio Approach

ERIC Educational Resources Information Center

Macias, J. A.

2012-01-01

Project-based learning is one of the main successful student-centered pedagogies broadly used in computing science courses. However, this approach can be insufficient when dealing with practical subjects that implicitly require many deliverables and a great deal of feedback and organizational resources. In this paper, a worked e-portfolio is…

The Challenge of Connecting the Dots in the B.R.A.I.N

PubMed Central

Devor, Anna; Bandettini, Peter A.; Boas, David A.; Bower, James M.; Buxton, Richard B.; Cohen, Lawrence B.; Dale, Anders M.; Einevoll, Gaute T.; Fox, Peter T.; Franceschini, Maria Angela; Friston, Karl J.; Fujimoto, James G.; Geyer, Marc A.; Greenberg, Joel H.; Halgren, Eric; Hämäläinen, Matti S.; Helmchen, Fritjof; Hyman, Bradley T.; Jasanoff, Alan; Jernigan, Terry L.; Judd, Lewis L.; Kim, Seong-Gi; Kleinfeld, David; Kopell, Nancy J.; Kutas, Marta; Kwong, Kenneth K.; Larkum, Matthew E.; Lo, Eng H.; Magistretti, Pierre J.; Mandeville, Joseph B.; Masliah, Eliezer; Mitra, Partha P.; Mobley, William C.; Moskowitz, Michael A.; Nimmerjahn, Axel; Reynolds, John H.; Rosen, Bruce R.; Salzberg, Brian M.; Schaffer, Chris B.; Silva, Gabriel A.; So, Peter T. C.; Spitzer, Nicholas C.; Tootell, Roger B.; Van Essen, David C.; Vanduffel, Wim; Vinogradov, Sergei A.; Wald, Larry L.; Wang, Lihong V.; Weber, Bruno; Yodh, Arjun G.

2013-01-01

The Brain Research through Advancing Innovative Neurotechnologies (BRAIN) Initiative has focused scientific attention on the necessary tools to understand the human brain and mind. Here, we outline our collective vision for what we can achieve within a decade with properly targeted efforts, and discuss likely technological deliverables and neuroscience progress. PMID:24139032

Benchmarking Peer Production Mechanisms, Processes & Practices

ERIC Educational Resources Information Center

Fischer, Thomas; Kretschmer, Thomas

2008-01-01

This deliverable identifies key approaches for quality management in peer production by benchmarking peer production practices and processes in other areas. (Contains 29 footnotes, 13 figures and 2 tables.)[This report has been authored with contributions of: Kaisa Honkonen-Ratinen, Matti Auvinen, David Riley, Jose Pinzon, Thomas Fischer, Thomas…

Connected Vehicle Pilot Deployment Program phase 1 : application deployment plan : New York City : final application deployment plan.

DOT National Transportation Integrated Search

2016-08-04

This document is the Task 7 Application Deployment Plan deliverable for the New York City Connected Vehicle Pilot Deployment. It describes the process that the deployment team will follow to acquire and test the connected vehicle safety applications....

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.; Bannochie, C. J.

Savannah River National Laboratory (SRNL) analyzed samples from Tank 21H in support of verification of Macrobatch (Salt Batch) 11 for the Interim Salt Disposition Program (ISDP) for processing. This document reports characterization data on the samples of Tank 21H and fulfills the requirements of Deliverable 3 of the Technical Task Request (TTR).

Connected Vehicle Pilot Deployment Program phase 1 : deployment readiness summary : New York City : final report.

DOT National Transportation Integrated Search

2016-09-09

This document describes the Deployment Readiness Summary for the New York City (NYC) Connected Vehicle Pilot Deployment (CVPD) Project. It demonstrates the completion of Task 1-12 deliverables of Phase 1 by the NYC team. The document also addresses h...

JTPA Recruitment Made (Much) Easier. Employment and Training Issues.

ERIC Educational Resources Information Center

Kelly, Jodie Sue

Intended for Job Training Partnership Act (JTPA) administrators and service deliverers, this publication provides those programs that are experiencing recruitment difficulties with new and innovative approaches to attracting eligible clients into their programs. It begins by listing the 10 most common recruitment marketing errors. Marketing is…

Silver deposited carboxymethyl chitosan-grafted magnetic nanoparticles as dual action deliverable antimicrobial materials.

PubMed

Vo, Duc-Thang; Sabrina, Sabrina; Lee, Cheng-Kang

2017-04-01

Carboxymethyl chitosan (CMCS) was known to have a much better antimicrobial activity than chitosan due to the increased cationic -NH 3 + groups resulted from the intra- and intermolecular interactions between the carboxyl and amino groups. CMCS was grafted onto the surface of silica coated magnetic nanoparticles (MNPs) to obtain magnetically retrievable and deliverable antimicrobial nanoparticles (MNPs@CMCS). The presence of carboxylate groups in CMCS not only enhanced antimicrobial activity but also enabled Ag ions chelating ability to induce the in situ formation of Ag nanoparticles (AgNPs). The deposition of AgNPs on the surface of MNPs@CMCS could significantly increase its antimicrobial activity against planktonic cells due to the dual action of CMCS and AgNPs. Due to its high magnetism, the as-prepared MNPs@CMCS-Ag could be efficiently delivered into an existing biofilm under the guidance of an applied magnetic field. Without direct contact, the Ag ions and/or radical oxygen species (ROS) released from the deposited Ag nanoparticles could effectively kill the bacteria embedded in the extracellular polymeric substances (EPS) matrix of biofilm. Copyright © 2016 Elsevier B.V. All rights reserved.

Setting priorities for EU healthcare workforce IT skills competence improvement.

PubMed

Li, Sisi; Bamidis, Panagiotis D; Konstantinidis, Stathis Th; Traver, Vicente; Car, Josip; Zary, Nabil

2017-04-01

A major challenge for healthcare quality improvement is the lack of IT skills and knowledge of healthcare workforce, as well as their ambivalent attitudes toward IT. This article identifies and prioritizes actions needed to improve the IT skills of healthcare workforce across the EU. A total of 46 experts, representing different fields of expertise in healthcare and geolocations, systematically listed and scored actions that would improve IT skills among healthcare workforce. The Child Health and Nutrition Research Initiative methodology was used for research priority-setting. The participants evaluated the actions using the following criteria: feasibility, effectiveness, deliverability, and maximum impact on IT skills improvement. The leading priority actions were related to appropriate training, integrating eHealth in curricula, involving healthcare workforce in the eHealth solution development, improving awareness of eHealth, and learning arrangement. As the different professionals' needs are prioritized, healthcare workforce should be actively and continuously included in the development of eHealth solutions.

Environmental Hazards Assessment Program. Quarterly report, January 1994--March 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-04

The objectives of the EHAP program are to: Develop a holistic, national basis for risk assessment, risk management and risk communication; Develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects, and; Identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health oriented aspects of environmental restoration and waste management. This report describes activities and reports on progress for the third quarter of year two (January-March, 1994) of the grant. To better accomplish objectives, grant efforts are organized into three major elements: The Crossroadsmore » of Humanity Series; Research, Science and Education Programs; and Program Management. The Crossroads of Humanity Series charted a new course, incorporating lessons learned during previous quarters into a series of programs designed to address environmental issues in a real world setting. Reports are included on the various research programs with milestones and deliverables from the third quarter.« less

Structure–function characterization of three human antibodies targeting the vaccinia virus adhesion molecule D8

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matho, Michael H.; Schlossman, Andrew; Gilchuk, Iuliia M.

Vaccinia virus (VACV) envelope protein D8 is one of three glycosaminoglycan adhesion molecules and binds to the linear polysaccharide chondroitin sulfate (CS). D8 is also a target for neutralizing antibody responses that are elicited by the smallpox vaccine, which has enabled the first eradication of a human viral pathogen and is a useful model for studying antibody responses. However, to date, VACV epitopes targeted by human antibodies have not been characterized at atomic resolution. Here in this paper, we characterized the binding properties of several human anti-D8 antibodies and determined the crystal structures of three VACV-mAb variants, VACV-66, VACV-138, andmore » VACV-304, separately bound to D8. Although all these antibodies bound D8 with high affinity and were moderately neutralizing in the presence of complement, VACV-138 and VACV-304 also fully blocked D8 binding to CS-A, the low affinity ligand for D8. VACV-138 also abrogated D8 binding to the high-affinity ligand CS-E, but we observed residual CS-E binding was observed in the presence of VACV-304. Analysis of the VACV-138– and VACV-304–binding sites along the CS-binding crevice of D8, combined with different efficiencies of blocking D8 adhesion to CS-A and CS-E allowed us to propose that D8 has a high- and low-affinity CS-binding region within its central crevice. The crevice is amenable to protein engineering to further enhance both specificity and affinity of binding to CS-E. Finally, a wild-type D8 tetramer specifically bound to structures within the developing glomeruli of the kidney, which express CS-E. We propose that through structure-based protein engineering, an improved D8 tetramer could be used as a potential diagnostic tool to detect expression of CS-E, which is a possible biomarker for ovarian cancer.« less

Structure–function characterization of three human antibodies targeting the vaccinia virus adhesion molecule D8

DOE PAGES

Matho, Michael H.; Schlossman, Andrew; Gilchuk, Iuliia M.; ...

2017-11-09

Vaccinia virus (VACV) envelope protein D8 is one of three glycosaminoglycan adhesion molecules and binds to the linear polysaccharide chondroitin sulfate (CS). D8 is also a target for neutralizing antibody responses that are elicited by the smallpox vaccine, which has enabled the first eradication of a human viral pathogen and is a useful model for studying antibody responses. However, to date, VACV epitopes targeted by human antibodies have not been characterized at atomic resolution. Here in this paper, we characterized the binding properties of several human anti-D8 antibodies and determined the crystal structures of three VACV-mAb variants, VACV-66, VACV-138, andmore » VACV-304, separately bound to D8. Although all these antibodies bound D8 with high affinity and were moderately neutralizing in the presence of complement, VACV-138 and VACV-304 also fully blocked D8 binding to CS-A, the low affinity ligand for D8. VACV-138 also abrogated D8 binding to the high-affinity ligand CS-E, but we observed residual CS-E binding was observed in the presence of VACV-304. Analysis of the VACV-138– and VACV-304–binding sites along the CS-binding crevice of D8, combined with different efficiencies of blocking D8 adhesion to CS-A and CS-E allowed us to propose that D8 has a high- and low-affinity CS-binding region within its central crevice. The crevice is amenable to protein engineering to further enhance both specificity and affinity of binding to CS-E. Finally, a wild-type D8 tetramer specifically bound to structures within the developing glomeruli of the kidney, which express CS-E. We propose that through structure-based protein engineering, an improved D8 tetramer could be used as a potential diagnostic tool to detect expression of CS-E, which is a possible biomarker for ovarian cancer.« less

Energy Systems Test Area (ESTA) Electrical Power Systems Test Operations: User Test Planning Guide

NASA Technical Reports Server (NTRS)

Salinas, Michael J.

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Electrical Power Systems Test Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Cost and Schedule Analytical Techniques Development: Option 1

NASA Technical Reports Server (NTRS)

1996-01-01

This Final Report summarizes the activities performed by Science Applications International Corporation (SAIC) for the base contract year from December 1, 1995 through November 30, 1996. The Final Report is in compliance with Paragraph 5 of Section F of the contract. This CSATD contract provides technical services and products to the NASA Marshall Space Flight Center's (MSFC) Engineering Cost Office (PPO3) and the Program Plans and Requirements Officer (PPO2). Detailed Monthly Progress Reports were submitted to MSFC in accordance with the contract's Statement of Work Section IV "Reporting and Documentation". These reports spelled out each month's specific work accomplishments, deliverables submitted, major meetings held, and other pertinent information. This Final Report will summarize these activities at a higher level.

Using a formal requirements management tool for system engineering: first results at ESO

NASA Astrophysics Data System (ADS)

Zamparelli, Michele

2006-06-01

The attention to proper requirement analysis and maintenance is growing in modern astronomical undertakings. The increasing degree of complexity that current and future generations of projects have reached requires substantial system engineering efforts and the usage of all available technology to keep project development under control. One such technology is a tool which helps managing relationships between deliverables at various development stages, and across functional subsystems and disciplines as different as software, mechanics, optics and electronics. The immediate benefits are traceability and the possibility to do impact analysis. An industrially proven tool for requirements management is presented together with the first results across some projects at ESO and a cost/benefit analysis of its usage. Experience gathered so far shows that the extensibility and configurability of the tool from one hand, and integration with common documentation formats and standards on the other, make it appear as a promising solution for even small scale system development.

Converting Parkinson-Specific Scores into Health State Utilities to Assess Cost-Utility Analysis.

PubMed

Chen, Gang; Garcia-Gordillo, Miguel A; Collado-Mateo, Daniel; Del Pozo-Cruz, Borja; Adsuar, José C; Cordero-Ferrera, José Manuel; Abellán-Perpiñán, José María; Sánchez-Martínez, Fernando Ignacio

2018-06-07

The aim of this study was to compare the Parkinson's Disease Questionnaire-8 (PDQ-8) with three multi-attribute utility (MAU) instruments (EQ-5D-3L, EQ-5D-5L, and 15D) and to develop mapping algorithms that could be used to transform PDQ-8 scores into MAU scores. A cross-sectional study was conducted. A final sample of 228 evaluable patients was included in the analyses. Sociodemographic and clinical data were also collected. Two EQ-5D questionnaires were scored using Spanish tariffs. Two models and three statistical techniques were used to estimate each model in the direct mapping framework for all three MAU instruments, including the most widely used ordinary least squares (OLS), the robust MM-estimator, and the generalized linear model (GLM). For both EQ-5D-3L and EQ-5D-5L, indirect response mapping based on an ordered logit model was also conducted. Three goodness-of-fit tests were employed to compare the models: the mean absolute error (MAE), the root-mean-square error (RMSE), and the intra-class correlation coefficient (ICC) between the predicted and observed utilities. Health state utility scores ranged from 0.61 (EQ-5D-3L) to 0.74 (15D). The mean PDQ-8 score was 27.51. The correlation between overall PDQ-8 score and each MAU instrument ranged from - 0.729 (EQ-5D-5L) to - 0.752 (EQ-5D-3L). A mapping algorithm based on PDQ-8 items had better performance than using the overall score. For the two EQ-5D questionnaires, in general, the indirect mapping approach had comparable or even better performance than direct mapping based on MAE. Mapping algorithms developed in this study enable the estimation of utility values from the PDQ-8. The indirect mapping equations reported for two EQ-5D questionnaires will further facilitate the calculation of EQ-5D utility scores using other country-specific tariffs.

Paperless Transaction for Publication Incentive System

NASA Astrophysics Data System (ADS)

Ibrahim, Rosziati; Madon, Hamiza Diana; Nazri, Nurul Hashida Amira Mohd; Saarani, Norhafizah; Mustapha, Aida

2017-08-01

Within the Malaysian context, incentive system in scientific publishing rewards authors for publishing journal articles or conference papers that are indexed by Scopus. At Universiti Tun Hussein Onn Malaysia, the incentive system is going into its third year in operational. The main challenge lies in preparing the evidences as required by the application guideline. This paper presents an online module for publication incentive within the University Publication Information System (SMPU). The module was developed using the Scrum methodology based on the existing workflow of paper-based application. The module is hoped to increase the quality of the system deliverables of SMPU as well as having the ability to cope with change of university requirements in the future.

Foothills Parkway Section 8B Final Environmental Report, Volume 6, Appendix N

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blasing, T.J.; Cada, G.F.; Carer, M.

1999-07-01

In 1994, Oak Ridge National Laboratory (ORNL) was tasked by the National Park Service (NPS) to prepare an Environmental Report (ER) for Section 8B of the Foothills Parkway in the Great Smoky Mountains National Park (GSMNP). Section 8B represents 27.7 km (14.2 miles) of a total of 115 km (72 miles) of the planned Foothills Parkway and would connect the Cosby community on the east to the incorporated town of Pittman Center to the west. The major deliverables for the project are listed. From August 1995 through October 1996, NPS, GSMNP, and ORNL staff interacted with Federal Highway Administration staffmore » to develop a conceptual design plan for Section 8B with the intent of protecting critical resources identified during the ER process to the extent possible. In addition, ORNL arranged for bioengineering experts to discuss techniques that might be employed on Section 8B with NPS, GSMNP, and ORNL staff during September 1996. For the purposes of this ER, there are two basic alternatives under consideration: (1) a build alternative and (2) a no-build alternative. Within the build alternative are a number of options including constructing Section 8B with no interchanges, constructing Section 8B with an interchange at SR 416 or U.S. 321, constructing Section 8B with a spur road on Webb Mountain, and considering operation of Section 8B both before and after the operation of Section 8C. The no-build alternative is considered the no-action alternative and is not to construct Section 8B. This volume of the ER documents the results of the architectural, historical, and cultural resources assessment for the entire Section 8B ROW that was completed in May 1995 to document the architectural, historical, and cultural resources located within the project area. The assessment included evaluation of the potential for cultural (i.e., rural historic) landscapes in the area of the ROW. The assessment showed that one National Register-listed property is located 0.3 mile south of the ROW, and seven properties appear to meet National Register criteria. For six of these seven sites, no audible or visual effects were predicted to result from the construction and operation of the build alternatives of Section 8B. Three areas were evaluated to determine if they could be considered rural historic landscapes: the Cosby Valley, Pittman Center, and Rocky Flats. None of these landscapes met National Register criteria for rural historic landscapes.« less

Combat Service Support Model Development: BRASS - TRANSLOG - Army 21

DTIC Science & Technology

1984-07-01

throughout’the system. Transitional problems may address specific hardware and related software , such as the Standard Army Ammunition System ( SAAS ...FILE. 00 Cabat Service Support Model Development .,PASS TRANSLOG -- ARMY 21 0 Contract Number DAAK11-84-D-0004 Task Order #1 DRAFT REPOkT July 1984 D...Armament Systems, Inc. 211 West Bel Air Avenue P.O. Box 158 Aberdeen, MD 21001 8 8 8 2 1 S CORMIT SERVICE SUPPORT MODEL DEVELOPMENT BRASS -- TRANSLOG

Discrete return lidar in natural resources: Recommendations for project planning, data processing, and deliverables

Treesearch

Jeffrey S. Evans; Andrew T. Hudak; Russ Faux; Alistair M. S. Smith

2009-01-01

Recent years have seen the progression of light detection and ranging (lidar) from the realm of research to operational use in natural resource management. Numerous government agencies, private industries, and public/private stakeholder consortiums are planning or have recently acquired large-scale acquisitions, and a national U.S. lidar acquisition is likely before...

Overcoming Language and Cultural Barriers in School: Helping Hispanic Students Acquire Success in Elementary School

ERIC Educational Resources Information Center

Ivey, Pauline S.

2011-01-01

Research shows that Hispanic second language students are not as successful as their English-speaking peers in school. The problem is in part due to several factors: curriculum deliverance in a foreign language, cultural differences, and family/school disconnect. Current census reports reveal that Hispanic populations in the United States, and…

A Report on Deliverable One: Determine Required Performance Characteristics [of Suction] for Management Of Prehospital Combat Casualty Care Injuries

DTIC Science & Technology

reflect it. There are commercially available manual and powered suction devices on the market , and several are specifically advertised for use in...combine to suggest that no device on the market meets even the most basic requirements of being small, lightweight, rugged, and demonstrating adequate

Final Design Report for the RH LLW Disposal Facility (RDF) Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Austad, Stephanie Lee

2015-09-01

The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.

Final Design Report for the RH LLW Disposal Facility (RDF) Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Austad, S. L.

2015-05-01

The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.

SmaggIce 2D Version 1.8: Software Toolkit Developed for Aerodynamic Simulation Over Iced Airfoils

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Vickerman, Mary B.

2005-01-01

SmaggIce 2D version 1.8 is a software toolkit developed at the NASA Glenn Research Center that consists of tools for modeling the geometry of and generating the grids for clean and iced airfoils. Plans call for the completed SmaggIce 2D version 2.0 to streamline the entire aerodynamic simulation process--the characterization and modeling of ice shapes, grid generation, and flow simulation--and to be closely coupled with the public-domain application flow solver, WIND. Grid generated using version 1.8, however, can be used by other flow solvers. SmaggIce 2D will help researchers and engineers study the effects of ice accretion on airfoil performance, which is difficult to do with existing software tools because of complex ice shapes. Using SmaggIce 2D, when fully developed, to simulate flow over an iced airfoil will help to reduce the cost of performing flight and wind-tunnel tests for certifying aircraft in natural and simulated icing conditions.

Human Systems Integration: Requirements and Functional Decomposition

NASA Technical Reports Server (NTRS)

Berson, Barry; Gershzohn, Gary; Boltz, Laura; Wolf, Russ; Schultz, Mike

2005-01-01

This deliverable was intended as an input to the Access 5 Policy and Simulation Integrated Product Teams. This document contains high-level pilot functionality for operations in the National Airspace System above FL430. Based on the derived pilot functions the associated pilot information and control requirements are given.

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... expense). Do not use the clause when the only deliverable items are computer software or computer software... architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013 with its Alternate I in... Software Previously Delivered to the Government, in solicitations when the resulting contract will require...

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... expense). Do not use the clause when the only deliverable items are computer software or computer software... architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013 with its Alternate I in... Software Previously Delivered to the Government, in solicitations when the resulting contract will require...

48 CFR 227.7103-2 - Acquisition of technical data.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Identify the type and quantity of the technical data to be delivered under the contract and the format and...-price type contract; (4) Include delivery schedules and acceptance criteria for each deliverable data... data. 227.7103-2 Section 227.7103-2 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7103-2 - Acquisition of technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Identify the type and quantity of the technical data to be delivered under the contract and the format and...-price type contract; (4) Include delivery schedules and acceptance criteria for each deliverable data... data. 227.7103-2 Section 227.7103-2 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7103-2 - Acquisition of technical data.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Identify the type and quantity of the technical data to be delivered under the contract and the format and...-price type contract; (4) Include delivery schedules and acceptance criteria for each deliverable data... data. 227.7103-2 Section 227.7103-2 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7103-2 - Acquisition of technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Identify the type and quantity of the technical data to be delivered under the contract and the format and...-price type contract; (4) Include delivery schedules and acceptance criteria for each deliverable data... data. 227.7103-2 Section 227.7103-2 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7103-2 - Acquisition of technical data.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Identify the type and quantity of the technical data to be delivered under the contract and the format and...-price type contract; (4) Include delivery schedules and acceptance criteria for each deliverable data... data. 227.7103-2 Section 227.7103-2 Federal Acquisition Regulations System DEFENSE ACQUISITION...

Report on Outcomes of Empirical Studies

ERIC Educational Resources Information Center

Morch, Anders; Nygard, Kathrine; Andersen, Renate; Mushtaq, Shazia; Nedic, Damir; Olsen, Espen; Hauge, Trond Eiliv; Vedoy, Gunn; Norenes, Svein Olav; Moen, Anne; Nes, Sturle; Olsen, Dorothy S.; Ludvigsen, Sten; Toiviainen, Hanna; Lallimo, Jiri; Toikka, Seppo; Paavola, Sami; Pohjola, Pasi; Hakkarainen, Kai

2009-01-01

This deliverable has been produced in the context of the Knowledge-Practice Laboratory (KP-Lab) project. KP-Lab focuses on innovative practices of working with knowledge in higher education, teacher training, and workplaces. Participants of WP10 are University of Helsinki, University of Oslo and Poyry Forest Industry representing both researchers…

77 FR 427 - EPAAR Clause for Compliance With EPA Policies for Information Resources Management

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-05

... the IRM policies, standards, and procedures set forth on the Office of Environmental Information..., standards, and procedures. (c) Section 508 requirements. Contract deliverables are required to be compliant... contracts. This revision incorporates to the EPAAR, administrative changes to update terminology and Web...

76 FR 12095 - Monroe Gas Storage Company, LLC; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Storage Company, LLC; Notice of Application Take notice that on February 18, 2011, Monroe Gas Storage... Monroe Gas Storage Project. Specifically, through this Application, Monroe seeks authorization to (1...) of high-deliverability working gas storage capacity, with about 4.46 Bcf of base gas. Nor is any...

Review of Rifle Marksmanship Training Research. CRESST Report 783

ERIC Educational Resources Information Center

Chung, Gregory K. W. K.; Nagashima, Sam O.; Delacruz, Girlie C.; Lee, John J.; Wainess, Richard; Baker, Eva L.

2011-01-01

The UCLA National Center for Research on Evaluation, Standards, and Student Testing (CRESST) is under contract from the Naval Postgraduate School (NPS) to conduct research on assessment models and tools designed to support Marine Corps rifle marksmanship. In this deliverable, we first review the literature on known-distance rifle marksmanship…

48 CFR 52.232-30 - Installment Payments for Commercial Items.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with this contract; the supplies deliverable or services due under the contract will be delivered or... paid to the Contractor when requested for each separately priced unit of supply (but not for services... Contractor shall, on demand, repay to the Government the amount of unliquidated installment payments. The...

Autonomous Systems, Robotics, and Computing Systems Capability Roadmap: NRC Dialogue

NASA Technical Reports Server (NTRS)

Zornetzer, Steve; Gage, Douglas

2005-01-01

Contents include the following: Introduction. Process, Mission Drivers, Deliverables, and Interfaces. Autonomy. Crew-Centered and Remote Operations. Integrated Systems Health Management. Autonomous Vehicle Control. Autonomous Process Control. Robotics. Robotics for Solar System Exploration. Robotics for Lunar and Planetary Habitation. Robotics for In-Space Operations. Computing Systems. Conclusion.

Central State University: Phase III Report

ERIC Educational Resources Information Center

Ohio Board of Regents, 2013

2013-01-01

This document is the final report on Central State University's implementation of Section 371 of Ohio Amended Substitute House Bill 153. Implementation of Phase I action items required that deliverables and timelines be shifted to give Central State the best opportunity for early success. In Phase II, Central State responded aggressively to a…

AdaNET research plan

NASA Technical Reports Server (NTRS)

Mcbride, John G.

1990-01-01

The mission of the AdaNET research effort is to determine how to increase the availability of reusable Ada components and associated software engineering technology to both private and Federal sectors. The effort is structured to define the requirements for transfer of Federally developed software technology, study feasible approaches to meeting the requirements, and to gain experience in applying various technologies and practices. The overall approach to the development of the AdaNET System Specification is presented. A work breakdown structure is presented with each research activity described in detail. The deliverables for each work area are summarized. The overall organization and responsibilities for each research area are described. The schedule and necessary resources are presented for each research activity. The estimated cost is summarized for each activity. The project plan is fully described in the Super Project Expert data file contained on the floppy disk attached to the back cover of this plan.

R&D for a Soft X-Ray Free Electron Laser Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corlett, John; Attwood, David; Byrd, John

2009-06-08

Several recent reports have identified the scientific requirements for a future soft x-ray light source, and a high-repetition-rate free-electron laser (FEL) facility that is responsive to these requirements is now on the horizon. R&D in some critical areas is needed, however, to demonstrate technical performance, thus reducing technical risks and construction costs. Such a facility most likely will be based on a CW superconducting linear accelerator with beam supplied by a high-brightness, high-repetition-rate photocathode electron gun operating in CW mode, and on an array of FELs to which the accelerated beam is distributed, each operating at high repetition rate andmore » with even pulse spacing. Dependent on experimental requirements, the individual FELs can be configured for either self-amplified spontaneous emission (SASE), seeded, or oscillator mode of operation, including the use of high-gain harmonic generation (HGHG), echo-enhanced harmonic generation (EEHG), harmonic cascade, or other configurations. In this White Paper we identify the overall accelerator R&D needs, and highlight the most important pre-construction R&D tasks required to value-engineer the design configuration and deliverables for such a facility. In Section 1.4 we identify the comprehensive R&D ultimately needed. We identify below the highest-priority requirements for understanding machine performance and reduce risk and costs at this pre-conceptual design stage. Details of implementing the required tasks will be the subject of future evaluation. Our highest-priority R&D program is the injector, which must be capable of delivering a beam with bunches up to a nanocoulomb at MHz repetition rate and with normalized emittance {le} 1 mm {center_dot} mrad. This will require integrated accelerating structure, cathode, and laser systems development. Cathode materials will impact the choice of laser technology in wavelength and energy per pulse, as well as vacuum requirements in the accelerating structure. Demonstration experiments in advanced seeding techniques, such as EEHG, and other optical manipulations to enhance the FEL process are required to reduce technical risk in producing temporally coherent and ultrashort x-ray output using optical seed lasers. Success of EEHG in particular would result in reduced development and cost of laser systems and accelerator hardware for seeded FELs. With a 1.5-2.5 GeV linac, FELs could operate in the VUV-soft x-ray range, where the actual beam energy will be determined by undulator technology; for example, to use the lower energy would require the use of advanced designs for which undulator R&D is needed. Significant reductions in both unit costs and accelerator costs resulting from the lower electron beam energy required to achieve lasing at a particular wavelength could be obtained with undulator development. Characterization of the wakefields of the vacuum chambers in narrow-gap undulators will be needed to minimize risk in ability to deliver close to transform limited pulses. CW superconducting RF technology for an FEL facility with short bunches at MHz rate and up to mA average current will require selection of design choices in cavity frequency and geometry, higher order mode suppression and power dissipation, RF power supply and distribution, accelerating gradient, and cryogenics systems. R&D is needed to define a cost and performance optimum. Developments in laser technology are proceeding at rapid pace, and progress in high-power lasers, harmonic generation, and tunable sources will need to be tracked.« less

Predicting preference-based SF-6D index scores from the SF-8 health survey.

PubMed

Wang, P; Fu, A Z; Wee, H L; Lee, J; Tai, E S; Thumboo, J; Luo, N

2013-09-01

To develop and test functions for predicting the preference-based SF-6D index scores from the SF-8 health survey. This study was a secondary analysis of data collected in a population health survey in which respondents (n = 7,529) completed both the SF-36 and the SF-8 questionnaires. We examined seven ordinary least-square estimators for their performance in predicting SF-6D scores from the SF-8 at both the individual and the group levels. In general, all functions performed similarly well in predicting SF-6D scores, and the predictions at the group level were better than predictions at the individual level. At the individual level, 42.5-51.5% of prediction errors were smaller than the minimally important difference (MID) of the SF-6D scores, depending on the function specifications, while almost all prediction errors of the tested functions were smaller than the MID of SF-6D at the group level. At both individual and group levels, the tested functions predicted lower than actual scores at the higher end of the SF-6D scale. Our study developed functions to generate preference-based SF-6D index scores from the SF-8 health survey, the first of its kind. Further research is needed to evaluate the performance and validity of the prediction functions.

GIS-and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Wei; Minnick, Matthew; Geza, Mengistu

2012-09-30

The Colorado School of Mines (CSM) was awarded a grant by the National Energy Technology Laboratory (NETL), Department of Energy (DOE) to conduct a research project en- titled GIS- and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development in October of 2008. The ultimate goal of this research project is to develop a water resource geo-spatial infrastructure that serves as “baseline data” for creating solutions on water resource management and for supporting decisions making on oil shale resource development. The project came to the end on September 30, 2012. This final project report will report the key findings frommore » the project activity, major accomplishments, and expected impacts of the research. At meantime, the gamma version (also known as Version 4.0) of the geodatabase as well as other various deliverables stored on digital storage media will be send to the program manager at NETL, DOE via express mail. The key findings from the project activity include the quantitative spatial and temporal distribution of the water resource throughout the Piceance Basin, water consumption with respect to oil shale production, and data gaps identified. Major accomplishments of this project include the creation of a relational geodatabase, automated data processing scripts (Matlab) for database link with surface water and geological model, ArcGIS Model for hydrogeologic data processing for groundwater model input, a 3D geological model, surface water/groundwater models, energy resource development systems model, as well as a web-based geo-spatial infrastructure for data exploration, visualization and dissemination. This research will have broad impacts of the devel- opment of the oil shale resources in the US. The geodatabase provides a “baseline” data for fur- ther study of the oil shale development and identification of further data collection needs. The 3D geological model provides better understanding through data interpolation and visualization techniques of the Piceance Basin structure spatial distribution of the oil shale resources. The sur- face water/groundwater models quantify the water shortage and better understanding the spatial distribution of the available water resources. The energy resource development systems model reveals the phase shift of water usage and the oil shale production, which will facilitate better planning for oil shale development. Detailed descriptions about the key findings from the project activity, major accomplishments, and expected impacts of the research will be given in the sec- tion of “ACCOMPLISHMENTS, RESULTS, AND DISCUSSION” of this report.« less

Solid state television camera (CCD-buried channel)

NASA Technical Reports Server (NTRS)

1976-01-01

The development of an all solid state television camera, which uses a buried channel charge coupled device (CCD) as the image sensor, was undertaken. A 380 x 488 element CCD array is utilized to ensure compatibility with 525 line transmission and display monitor equipment. Specific camera design approaches selected for study and analysis included (a) optional clocking modes for either fast (1/60 second) or normal (1/30 second) frame readout, (b) techniques for the elimination or suppression of CCD blemish effects, and (c) automatic light control and video gain control (i.e., ALC and AGC) techniques to eliminate or minimize sensor overload due to bright objects in the scene. Preferred approaches were determined and integrated into a deliverable solid state TV camera which addressed the program requirements for a prototype qualifiable to space environment conditions.