75 FR 16513 - Delphi Packard Electrical/Electronic Architecture, a Subsidiary of Delphi Corporation, Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

.../Electronic Architecture, a Subsidiary of Delphi Corporation, Including On-Site Leased Workers From Bartech... Assistance on December 8th, 2009, applicable to workers of Delphi Packard Electrical/Electronic Architecture... location of Delphi Packard Electrical/Electronic Architecture, a subsidiary of Delphi Corporation. The...

Nanocrystalline cerium oxide materials for solid fuel cell systems

DOEpatents

Brinkman, Kyle S

2015-05-05

Disclosed are solid fuel cells, including solid oxide fuel cells and PEM fuel cells that include nanocrystalline cerium oxide materials as a component of the fuel cells. A solid oxide fuel cell can include nanocrystalline cerium oxide as a cathode component and microcrystalline cerium oxide as an electrolyte component, which can prevent mechanical failure and interdiffusion common in other fuel cells. A solid oxide fuel cell can also include nanocrystalline cerium oxide in the anode. A PEM fuel cell can include cerium oxide as a catalyst support in the cathode and optionally also in the anode.

Development of a novel wet oxidation process for hazardous and mixed wastes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dhooge, P.M.

1994-11-01

This article describes and evaluates the DETOX{sup sm} process for processing of mixed wastes. Many DOE waste streams and remediates contain complex and variable mixtures of organic compounds, toxic metals, and radionuclides, often dispersed in organic or inorganic matrices, such as personal protective equipment, various sludges, soils, and water. The DETOX{sup sm} process, patented by Delphi Research, uses a unique combination of metal catalysts to increase the rate of oxidation of organic materials. Included are the following subject areas: project description (phases I-IV); results of all phases; and future work. 5 figs., 1 tab.

[Handover between home and respite care facilities : Delphi survey within the context of continuity of care for people with dementia].

PubMed

Kuske, S; Roes, M; Bartholomeyczik, S

2016-07-01

Criteria for the handover between healthcare settings were identified based on a review and on results of empirical data. This study was carried out to select the most relevant criteria for defining the quality of continuity of care of people with dementia (PwD) in the context of the handover between care at home and respite care facilities. A modified classical two-step Delphi design was used in combination with a group Delphi design. A total of 28 core criteria with a consensus strength of > 60 % are presented. Safety-relevant information, especially the personal habits of PwD and the role of informal caregivers in the handover between care settings are important. Furthermore, the following general principles to ensure the quality of continuity of the care of PwD were deduced: completeness, verification, multipath communication, timeliness and topicality, accessibility and defined responsibilities, roles and standardization. A successful transition of PwD to respite care facilities relies on the provision of relevant information, considering personal habits, before the day of transition. Furthermore, a timely preparation for discharge is important. The individual needs of the informal caregivers with regard to their support should be considered. Professionals who are responsible in handover processes should have solid communication competence in order to collect relevant information from informal caregivers, who have a strong individual care experience with the PwD.

75 FR 28655 - Delphi Packard Electrical/Electronic Architecture, a Subsidiary of Delphi Corporation, Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

.../Electronic Architecture, a Subsidiary of Delphi Corporation, Including On-Site Leased Workers From Bartech... Assistance on December 8, 2009, applicable to workers of Delphi Packard Electrical/Electronic Architecture, a.../Electronic Architecture, a subsidiary of Delphi Corporation, including on-site leased [[Page 28656

Building sustainability indicators in the health dimension for solid waste management.

PubMed

Veiga, Tatiane Bonametti; Coutinho, Silvano da Silva; Andre, Silvia Carla Silva; Mendes, Adriana Aparecida; Takayanagui, Angela Maria Magosso

2016-08-08

to prepare a list of sustainability indicators in the health dimension, for urban solid waste management. a descriptive and exploratory study performed jointly with 52 solid waste specialists, using a three-steps Delphi technique, and a scale measuring the degree of importance for agreement among the researchers in this area. the subjects under study were 92,3% PhD's concentrated in the age group from 30 to 40 years old (32,7%) and 51% were men. At the end of the 3rd step of the Delphi process, the average and standard deviation of all the proposed indicators varied from 4,22 (±0,79) to 4,72 (±0,64), in a scale of scores for each indicator from 1 to 5 (from "dispensable" to "very important"). Results showed the level of correspondence among the participants ranging from 82% to 94% related to those indicators. the proposed indicators may be helpful not only for the identification of data that is updated in this area, but also to enlarge the field of debates of the environmental health policies, directed not only for urban solid waste but for the achievement of better health conditions for the Brazilian context. elaborar uma lista de indicadores de sustentabilidade na dimensão da saúde para gestão de resíduos sólidos urbanos. estudo descritivo e exploratório, realizado com 52 especialistas na área de resíduos sólidos, utilizando a técnica Delphi em três etapas, com o uso da escala de mensuração do grau de importância para obtenção de consenso entre pesquisadores da área da investigação. dos sujeitos estudados , 92,3% eram doutores, com maior concentração na faixa etária entre 30 e 40 anos (32,7%) e 51,0% do sexo masculino. Ao final da 3ª etapa de aplicação da técnica Delphi, a média e o desvio-padrão de todos os indicadores propostos variaram de 4,22 (±0,79) a 4,72 (±0,64), em uma escala de pontuação atribuída para cada indicador de 1 a 5 (Respectivamente, de "dispensável" a "muito importante"). Os resultados demonstraram nível de concordância entre os sujeitos participantes que variou de 82% a 94% em relação a esses indicadores. os indicadores propostos podem auxiliar, tanto na identificação de dados atualizados no setor, quanto na ampliação das discussões das políticas de saúde ambiental, voltadas não apenas para resíduos sólidos urbanos, mas objetivando também o alcance de melhores condições de saúde no contexto da atual realidade brasileira. elaborar una lista de indicadores de sostenibilidad en la dimensión salud para la gestión de residuos sólidos urbanos. estudio descriptivo y exploratorio realizado con 52 especialistas en el área de residuos sólidos, utilizando la técnica Delphi en tres etapas, con uso de escala de medida de grado de importancia para obtención de consenso entre investigadores de esta área. de los sujetos estudiados , 92,3% tenían doctorado con mayor concentración en el grupo etario entre 30 y 40 años (32,7%) y 51% del sexo masculino. Al final de la 3ª. Etapa de aplicación de la técnica Delphi, el promedio y el desvío estándar de todos los indicadores propuestos variaron de 4,22 (±0,79) a 4,72 (±0,64), en una escala de puntos atribuida a cada indicador de 1 a 5 (Respectivamente de "dispensable" a "muy importante"). Los resultados mostraron un nivel de acuerdo entre los sujetos participantes que varió de 82% a 94% en relación a estos indicadores. los indicadores propuestos pueden ayudar tanto en la identificación de datos actualizados en este sector, como también para ampliar las discusiones de las políticas de salud ambiental, dirigidas no solamente para residuos sólidos urbanos pero también para alcanzar mejores condiciones de salud en el contexto de la realidad brasileña actual.

Practical Considerations for Conducting Delphi Studies: The Oracle Enters a New Age.

ERIC Educational Resources Information Center

Eggers, Renee M.; Jones, Charles M.

1998-01-01

In addition to giving an overview of Delphi methodology and describing the methodology used by the researchers in two Delphi studies, the authors provide information about electronic communication in Delphi studies. Also provided are suggestions that can be used in a Delphi study involving any form of communication. (SLD)

46 CFR 194.05-11 - Flammable solids and oxidizing materials-Detail requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Flammable solids and oxidizing materials-Detail... and Marking § 194.05-11 Flammable solids and oxidizing materials—Detail requirements. (a) Flammable solids and oxidizing materials used as chemical stores and reagents are governed by subparts 194.15 and...

46 CFR 194.05-11 - Flammable solids and oxidizing materials-Detail requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Flammable solids and oxidizing materials-Detail... and Marking § 194.05-11 Flammable solids and oxidizing materials—Detail requirements. (a) Flammable solids and oxidizing materials used as chemical stores and reagents are governed by subparts 194.15 and...

Regenerative process and system for the simultaneous removal of particulates and the oxides of sulfur and nitrogen from a gas stream

DOEpatents

Cohen, M.R.; Gal, E.

1993-04-13

A process and system are described for simultaneously removing from a gaseous mixture, sulfur oxides by means of a solid sulfur oxide acceptor on a porous carrier, nitrogen oxides by means of ammonia gas and particulate matter by means of filtration and for the regeneration of loaded solid sulfur oxide acceptor. Finely-divided solid sulfur oxide acceptor is entrained in a gaseous mixture to deplete sulfur oxides from the gaseous mixture, the finely-divided solid sulfur oxide acceptor being dispersed on a porous carrier material having a particle size up to about 200 microns. In the process, the gaseous mixture is optionally pre-filtered to remove particulate matter and thereafter finely-divided solid sulfur oxide acceptor is injected into the gaseous mixture.

Engineered glass seals for solid-oxide fuel cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Surdoval, Wayne; Lara-Curzio, Edgar; Stevenson, Jeffry

2017-02-07

A seal for a solid oxide fuel cell includes a glass matrix having glass percolation therethrough and having a glass transition temperature below 650.degree. C. A deformable second phase material is dispersed in the glass matrix. The second phase material can be a compliant material. The second phase material can be a crushable material. A solid oxide fuel cell, a precursor for forming a seal for a solid oxide fuel cell, and a method of making a seal for a solid oxide fuel cell are also disclosed.

Solid lithium ion conducting electrolytes and methods of preparation

DOEpatents

Narula, Chaitanya K; Daniel, Claus

2013-05-28

A composition comprised of nanoparticles of lithium ion conducting solid oxide material, wherein the solid oxide material is comprised of lithium ions, and at least one type of metal ion selected from pentavalent metal ions and trivalent lanthanide metal ions. Solution methods useful for synthesizing these solid oxide materials, as well as precursor solutions and components thereof, are also described. The solid oxide materials are incorporated as electrolytes into lithium ion batteries.

Solid lithium ion conducting electrolytes and methods of preparation

DOEpatents

Narula, Chaitanya K.; Daniel, Claus

2015-11-19

A composition comprised of nanoparticles of lithium ion conducting solid oxide material, wherein the solid oxide material is comprised of lithium ions, and at least one type of metal ion selected from pentavalent metal ions and trivalent lanthanide metal ions. Solution methods useful for synthesizing these solid oxide materials, as well as precursor solutions and components thereof, are also described. The solid oxide materials are incorporated as electrolytes into lithium ion batteries.

Web-based dynamic Delphi: a new survey instrument

NASA Astrophysics Data System (ADS)

Yao, JingTao; Liu, Wei-Ning

2006-04-01

We present a mathematical model for a dynamic Delphi survey method which takes advantages of Web technology. A comparative study on the performance of the conventional Delphi method and the dynamic Delphi instrument is conducted. It is suggested that a dynamic Delphi survey may form a consensus quickly. However, the result may not be robust due to the judgement leaking issues.

Considerations when conducting e-Delphi research: a case study.

PubMed

Toronto, Coleen

2017-06-22

Background E-Delphi is a way to access a geographically dispersed group of experts. It is similar to other Delphi methods but conducted online. E-research methodologies, such as the e-Delphi method, have yet to undergo significant critical discussion. Aim To highlight some of the challenges nurse researchers may wish to consider when using e-Delphi in their research. Discussion This paper provides details about the author's approach to conducting an e-Delphi study in which a group of health literacy nurse experts (n=41) used an online survey platform to identify and prioritise essential health literacy competencies for registered nurses. Conclusion This paper advances methodological discourse about e-Delphi by critically assessing an e-Delphi case study. The online survey platform used in this study was advantageous for the researcher and the experts: the experts could participate at any time and place where the internet was available; the researcher could efficiently access a national group of experts, track responses and analyse data in each round. Implications for practice E-Delphi studies create opportunities for nurse researchers to conduct research nationally and internationally. Before conducting an e-Delphi study, researchers should carefully consider the design and methods for collecting data, to avoid challenges that could potentially compromise the quality of the findings. Researchers are encouraged to publish details about their approaches to e-Delphi studies, to advance the state of the science.

Electrode design for low temperature direct-hydrocarbon solid oxide fuel cells

DOEpatents

Chen, Fanglin; Zhao, Fei; Liu, Qiang

2015-10-06

In certain embodiments of the present disclosure, a solid oxide fuel cell is described. The solid oxide fuel cell includes a hierarchically porous cathode support having an impregnated cobaltite cathode deposited thereon, an electrolyte, and an anode support. The anode support includes hydrocarbon oxidation catalyst deposited thereon, wherein the cathode support, electrolyte, and anode support are joined together and wherein the solid oxide fuel cell operates a temperature of 600.degree. C. or less.

Electrode Design for Low Temperature Direct-Hydrocarbon Solid Oxide Fuel Cells

NASA Technical Reports Server (NTRS)

Liu, Qiang (Inventor); Chen, Fanglin (Inventor); Zhao, Fei (Inventor)

2015-01-01

In certain embodiments of the present disclosure, a solid oxide fuel cell is described. The solid oxide fuel cell includes a hierarchically porous cathode support having an impregnated cobaltite cathode deposited thereon, an electrolyte, and an anode support. The anode support includes hydrocarbon oxidation catalyst deposited thereon, wherein the cathode support, electrolyte, and anode support are joined together and wherein the solid oxide fuel cell operates a temperature of 600.degree. C. or less.

Partial oxidation of methane (POM) assisted solid oxide co-electrolysis

DOEpatents

Chen, Fanglin; Wang, Yao

2017-02-21

Methods for simultaneous syngas generation by opposite sides of a solid oxide co-electrolysis cell are provided. The method can comprise exposing a cathode side of the solid oxide co-electrolysis cell to a cathode-side feed stream; supplying electricity to the solid oxide co-electrolysis cell such that the cathode side produces a product stream comprising hydrogen gas and carbon monoxide gas while supplying oxygen ions to an anode side of the solid oxide co-electrolysis cell; and exposing the anode side of the solid oxide co-electrolysis cell to an anode-side feed stream. The cathode-side feed stream comprises water and carbon dioxide, and the anode-side feed stream comprises methane gas such that the methane gas reacts with the oxygen ions to produce hydrogen and carbon monoxide. The cathode-side feed stream can further comprise nitrogen, hydrogen, or a mixture thereof.

Mixed oxide solid solutions

DOEpatents

Magno, Scott; Wang, Ruiping; Derouane, Eric

2003-01-01

The present invention is a mixed oxide solid solution containing a tetravalent and a pentavalent cation that can be used as a support for a metal combustion catalyst. The invention is furthermore a combustion catalyst containing the mixed oxide solid solution and a method of making the mixed oxide solid solution. The tetravalent cation is zirconium(+4), hafnium(+4) or thorium(+4). In one embodiment, the pentavalent cation is tantalum(+5), niobium(+5) or bismuth(+5). Mixed oxide solid solutions of the present invention exhibit enhanced thermal stability, maintaining relatively high surface areas at high temperatures in the presence of water vapor.

Staged heating by oxidation of carbonaceous material

DOEpatents

Knell, Everett W.; Green, Norman W.

1978-01-31

A carbonaceous material is pyrolyzed in the presence of a particulate source of heat obtained by the partial oxidation of a carbon containing solid residue of the carbonaceous material. The heat obtained from the oxidation of the carbon containing solid residue is maximized by preheating the carbon containing solid residue with a hot gas stream obtained by oxidizing the gaseous combustion products of the carbon containing solid residue.

Solid-state rechargeable magnesium battery

DOEpatents

Shao, Yuyan; Liu, Jun; Liu, Tianbiao; Li, Guosheng

2016-09-06

Embodiments of a solid-state electrolyte comprising magnesium borohydride, polyethylene oxide, and optionally a Group IIA or transition metal oxide are disclosed. The solid-state electrolyte may be a thin film comprising a dispersion of magnesium borohydride and magnesium oxide nanoparticles in polyethylene oxide. Rechargeable magnesium batteries including the disclosed solid-state electrolyte may have a coulombic efficiency .gtoreq.95% and exhibit cycling stability for at least 50 cycles.

Theoretical Design and Experimental Evaluation of Molten Carbonate Modified LSM Cathode for Low Temperature Solid Oxide Fuel Cells

DTIC Science & Technology

2015-01-07

Min Lee, Kevin Huang. Mixed Oxide-Ion and Carbonate-Ion Conductors (MOCCs) as Electrolyte Materials for Solid Oxide Fuel Cells, 218th ECS Meeting... Solid Oxide Fuel Cells The views, opinions and/or findings contained in this report are those of the author(s) and should not contrued as an official...ES) U.S. Army Research Office P.O. Box 12211 Research Triangle Park, NC 27709-2211 Solid Oxide Fuel Cell, Oxygen Reduction, Molten Carbonate

Method of electrode fabrication for solid oxide electrochemical cells

DOEpatents

Jensen, R.R.

1990-11-20

A process for fabricating cermet electrodes for solid oxide electrochemical cells by sintering is disclosed. First, a porous metal electrode is fabricated on a solid oxide cell, such as a fuel cell by, for example, sintering, and is then infiltrated with a high volume fraction stabilized zirconia suspension. A second sintering step is used to sinter the infiltrated zirconia to a high density in order to more securely attach the electrode to the solid oxide electrolyte of the cell. High performance fuel electrodes can be obtained with this process. Further electrode performance enhancement may be achieved if stabilized zirconia doped with cerium oxide, chromium oxide, titanium oxide, and/or praseodymium oxide for electronic conduction is used. 5 figs.

Method of electrode fabrication for solid oxide electrochemical cells

DOEpatents

Jensen, Russell R.

1990-01-01

A process for fabricating cermet electrodes for solid oxide electrochemical cells by sintering is disclosed. First, a porous metal electrode is fabricated on a solid oxide cell, such as a fuel cell by, for example, sintering, and is then infiltrated with a high volume fraction stabilized zirconia suspension. A second sintering step is used to sinter the infiltrated zirconia to a high density in order to more securely attach the electrode to the solid oxide electrolyte of the cell. High performance fuel electrodes can be obtained with this process. Further electrode performance enhancement may be achieved if stabilized zirconia doped with cerium oxide, chromium oxide, titanium oxide, and/or praseodymium oxide for electronic conduction is used.

Internet-Based Delphi Research: Case Based Discussion

PubMed Central

Donohoe, Holly M.; Stellefson, Michael L.

2013-01-01

The interactive capacity of the Internet offers benefits that are intimately linked with contemporary research innovation in the natural resource and environmental studies domains. However, e-research methodologies, such as the e-Delphi technique, have yet to undergo critical review. This study advances methodological discourse on the e-Delphi technique by critically assessing an e-Delphi case study. The analysis suggests that the benefits of using e-Delphi are noteworthy but the authors acknowledge that researchers are likely to face challenges that could potentially compromise research validity and reliability. To ensure that these issues are sufficiently considered when planning and designing an e-Delphi, important facets of the technique are discussed and recommendations are offered to help the environmental researcher avoid potential pitfalls associated with coordinating e-Delphi research. PMID:23288149

The Delphi Method Online: Medical Expert Consensus Via the Internet

PubMed Central

Cam, Kenneth M.; McKnight, Patrick E.; Doctor, Jason N.

2002-01-01

Delphi is an expert consensus method. The theory behind the Delphi method is that the interaction of experts may lead to a reduction in individual bias. We have developed software that carries out all aspects of the Delphi method via the Internet. The Delphi method online consists of three components: 1) authorship, 2) interactive polling, and 3) reporting/results. We hope that researchers use this tool in future medical expert systems.

46 CFR 194.05-11 - Flammable solids and oxidizing materials-Detail requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Flammable solids and oxidizing materials-Detail... and Marking § 194.05-11 Flammable solids and oxidizing materials—Detail requirements. (a) Flammable... 194.20. (b) Oxidizing materials used as blasting agents are regulated by the appropriate portions of...

46 CFR 194.05-11 - Flammable solids and oxidizing materials-Detail requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Flammable solids and oxidizing materials-Detail... and Marking § 194.05-11 Flammable solids and oxidizing materials—Detail requirements. (a) Flammable... 194.20. (b) Oxidizing materials used as blasting agents are regulated by the appropriate portions of...

46 CFR 194.05-11 - Flammable solids and oxidizing materials-Detail requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Flammable solids and oxidizing materials-Detail... and Marking § 194.05-11 Flammable solids and oxidizing materials—Detail requirements. (a) Flammable... 194.20. (b) Oxidizing materials used as blasting agents are regulated by the appropriate portions of...

Preliminary Electrochemical Characterization of Anode Supported Solid Oxide Cell (AS-SOC) Produced in the Institute of Power Engineering Operated in Electrolysis Mode (SOEC)

NASA Astrophysics Data System (ADS)

Kupecki, Jakub; Motyliński, Konrad; Skrzypkiewicz, Marek; Wierzbicki, Michał; Naumovich, Yevgeniy

2017-12-01

The article discusses the operation of solid oxide electrochemical cells (SOC) developed in the Institute of Power Engineering as prospective key components of power-to-gas systems. The fundamentals of the solid oxide cells operated as fuel cells (SOFC - solid oxide fuel cells) and electrolysers (SOEC - solid oxide fuel cells) are given. The experimental technique used for electrochemical characterization of cells is presented. The results obtained for planar cell with anodic support are given and discussed. Based on the results, the applicability of the cells in power-to-gas systems (P2G) is evaluated.

Regenerative process and system for the simultaneous removal of particulates and the oxides of sulfur and nitrogen from a gas stream

DOEpatents

Cohen, Mitchell R.; Gal, Eli

1993-01-01

A process and system for simultaneously removing from a gaseous mixture, sulfur oxides by means of a solid sulfur oxide acceptor on a porous carrier, nitrogen oxides by means of ammonia gas and particulate matter by means of filtration and for the regeneration of loaded solid sulfur oxide acceptor. Finely-divided solid sulfur oxide acceptor is entrained in a gaseous mixture to deplete sulfur oxides from the gaseous mixture, the finely-divided solid sulfur oxide acceptor being dispersed on a porous carrier material having a particle size up to about 200 microns. In the process, the gaseous mixture is optionally pre-filtered to remove particulate matter and thereafter finely-divided solid sulfur oxide acceptor is injected into the gaseous The government of the United States of America has rights in this invention pursuant to Contract No. DE-AC21-88MC 23174 awarded by the U.S. Department of Energy.

Developing the E-Delphi System: A Web-Based Forecasting Tool for Educational Research.

ERIC Educational Resources Information Center

Chou, Chien

2002-01-01

Discusses use of the Delphi technique and describes the development of an electronic version, called e-Delphi, in which questionnaire construction and communication with panel members was accomplished using the Web. Explains system function and interface and discusses evaluation of the e-Delphi system. (Author/LRW)

Cerium-modified doped strontium titanate compositions for solid oxide fuel cell anodes and electrodes for other electrochemical devices

DOEpatents

Marina, Olga A [Richland, WA; Stevenson, Jeffry W [Richland, WA

2010-03-02

The present invention provides novel compositions that find advantageous use in making electrodes for electrochemical cells and electrochemical devices such as solid oxide fuel cells, electrolyzers, sensors, pumps and the like, the compositions comprising cerium-modified doped strontium titanate. The invention also provides novel methods for making and using anode material compositions and solid oxide fuel cells and solid oxide fuel cell assemblies having anodes comprising the compositions.

Cerium-modified doped strontium titanate compositions for solid oxide fuel cell anodes and electrodes for other electrochemical devices

DOEpatents

Marina, Olga A [Richland, WA; Stevenson, Jeffry W [Richland, WA

2010-11-23

The present invention provides novel compositions that find advantageous use in making electrodes for electrochemical cells and electrochemical devices such as solid oxide fuel cells, electrolyzers, sensors, pumps and the like, the compositions comprising cerium-modified doped strontium titanate. The invention also provides novel methods for making and using anode material compositions and solid oxide fuel cells and solid oxide fuel cell assemblies having anodes comprising the compositions.

Development Studies for a Novel Wet Oxidation Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delphi Research

1999-09-30

DETOX is a catalyzed wet oxidation process that destroys organic materials in an acidic water solution of iron at 373 to 473 K. The solution can be used repeatedly to destroy great amounts of organic materials. Since the process is conducted in a contained vessel, air emissions from the process can be well controlled. The solution is also capable of dissolving and concentrating many heavy and radioactive metals for eventual stabilization and disposal. The Phase III effort for this project is fabrication, assembly, and installation of the DETOX demonstration unit, preparation of documentation and training to meet site requirements formore » operation, followed by system run-in and shakedown testing of the unit prior to demonstration testing. The Title III design was completed and the unit was fabricated according to standards set forth by OSHA, EPA, the American Petroleum Institute (i.e., chemical and petroleum industry standards), and the ASME B-313 Piping Code requirements as agreed to in preliminary design meetings with primary stakeholders. The unit was assembled in three modules and two trailers and then shipped to the TNX facility at the Savannah River Site in September and october of 1996. On-going site integration tasks were address while delays in installation arose due to funding sources and costs. In March of 1997, Delphi was authorized to proceed with the installation of the unit, making electrical and mechanical connections necessary to operate the unit. All installation tasks were completed in August of 1997. Results of an Operational Readiness Review conducted in August 1997 verified that Delphi's procedures and documentation met the necessary requirements to operate the unit at SRS. Completion of the final checklist of WSRC requirements was then addressed including the Owner's Independent Inspection Report, verifying all components of the unit met B-31.3 standards. Final hydraulic and pneumatic tests were completed in November to satisfy the B-31.3 requirement. During the month of December, the control system and heating and cooling systems were then prepared to initiate system startup and conduct the run-in tests. Shakedown tests were combined with the Phase IV tasks due to DOE funding constraints, i.e., tests formerly planned to be conducted with oil and solid materials were deferred to Phase IV and combined with similar testing. Once run-in testing has been completed, the primary objectives of Phase III will have been achieved and the project will be ready to proceed to demonstration testing (Phase IV).« less

Assessment of mastication in healthy children and children with cerebral palsy: a validity and consistency study.

PubMed

Remijn, L; Speyer, R; Groen, B E; Holtus, P C M; van Limbeek, J; Nijhuis-van der Sanden, M W G

2013-05-01

The aim of this study was to develop the Mastication Observation and Evaluation instrument for observing and assessing the chewing ability of children eating solid and lumpy foods. This study describes the process of item definition and item selection and reports the content validity, reproducibility and consistency of the instrument. In the developmental phase, 15 experienced speech therapists assessed item relevance and descriptions over three Delphi rounds. Potential items were selected based on the results from a literature review. At the initial Delphi round, 17 potential items were included. After three Delphi rounds, 14 items that regarded as providing distinctive value in assessment of mastication (consensus >75%) were included in the Mastication Observation and Evaluation instrument. To test item reproducibility and consistency, two experts and five students evaluated video recordings of 20 children (10 children with cerebral palsy aged 29-65 months and 10 healthy children aged 11-42 months) eating bread and a biscuit. Reproducibility was estimated by means of the intraclass correlation coefficient (ICC). With the exception of one item concerning chewing duration, all items showed good to excellent intra-observer agreement (ICC students: 0.73-1.0). With the exception of chewing duration and number of swallows, inter-observer agreement was fair to excellent for all items (ICC experts: 0.68-1.0 and ICC students: 0.42-1.0). Results indicate that this tool is a feasible instrument and could be used in clinical practice after further research is completed on the reliability of the tool. © 2013 Blackwell Publishing Ltd.

Delphi Survey of Clinical Nursing and Midwifery Research Priorities in the Eastern Mediterranean Region.

PubMed

Sun, Carolyn; Dohrn, Jennifer; Oweis, Arwa; Huijer, Huda Abu-Saad; Abu-Moghli, Fathieh; Dawani, Hania; Ghazi, Cheherezade; Larson, Elaine

2017-03-01

As the shortage of nurses and midwives is expected to worsen in the Eastern Mediterranean region concomitantly with a growing focus on achievement of universal health coverage, nurses and midwives are expected to fill major gaps in health care. Hence, the need for a solid evidence base for nursing practice and a clear direction for clinical nursing research are paramount. Therefore, a Delphi survey was conducted to determine clinical (research focused on patient outcomes) nursing and midwifery priorities for research within this region. A Delphi survey, using iterative rounds of an online survey of regional clinical nursing and midwifery research experts, was conducted between January and April 2016. Consensus was determined by percentage agreement on level of priority for topics as determined by participants. Additionally, results were compared between countries within the region by income and mortality levels using Kendall's tau. Critical research topics were focused on public/community/primary care as well as emergency preparedness for disasters, and these priorities are well aligned with gaps in the literature for this region. There were statistically significant differences between priority level and country mortality group for geriatrics, self-management of disease, and sexually transmitted infections. Critical research priorities should focus on population-based health topics. Between-country differences should be analyzed further. A clinical research database for the region may help improve research access for nurses and midwives. Practicing nurses and midwives lack extensive evidence (including culturally relevant evidence) on which to practice. Increasing research in areas identified in this survey may improve patient outcomes and quality of care regionally. © 2017 Sigma Theta Tau International.

Development of criteria for evaluating clinical response in thyroid eye disease using a modified Delphi technique.

PubMed

Douglas, Raymond S; Tsirbas, Angelo; Gordon, Mark; Lee, Diana; Khadavi, Nicole; Garneau, Helene Chokron; Goldberg, Robert A; Cahill, Kenneth; Dolman, Peter J; Elner, Victor; Feldon, Steve; Lucarelli, Mark; Uddin, Jimmy; Kazim, Michael; Smith, Terry J; Khanna, Dinesh

2009-09-01

To identify components of a provisional clinical response index for thyroid eye disease using a modified Delphi technique. The International Thyroid Eye Disease Society conducted a structured, 3-round Delphi exercise establishing consensus for a core set of measures for clinical trials in thyroid eye disease. The steering committee discussed the results in a face-to-face meeting (nominal group technique) and evaluated each criterion with respect to its feasibility, reliability, redundancy, and validity. Redundant measures were consolidated or excluded. Criteria were parsed into 11 domains for the Delphi surveys. Eighty-four respondents participated in the Delphi 1 survey, providing 220 unique items. Ninety-two members (100% of the respondents from Delphi 1 plus 8 new participants) responded in Delphi 2 and rated the same 220 items. Sixty-four members (76% of participants) rated 153 criteria in Delphi 3 (67 criteria were excluded because of redundancy). Criteria with a mean greater than 6 (1 = least appropriate to 9 = most appropriate) were further evaluated by the nominal group technique and provisional core measures were chosen. Using a Delphi exercise, we developed provisional core measures for assessing disease activity and severity in clinical trials of therapies for thyroid eye disease. These measures will be iteratively refined for use in multicenter clinical trials.

Development of criteria for evaluating clinical response in thyroid eye disease (CRI-TED) using a modified Delphi technique

PubMed Central

Douglas, Raymond S.; Tsirbas, Angelo; Gordon, Mark; Lee, Diana; Khadavi, Nicole; Garneau, Helene Chokron; Goldberg, Robert A.; Cahill, Kenneth; Dolman, Peter J.; Elner, Victor; Feldon, Steve; Lucarelli, Mark; Uddin, Jimmy; Kazim, Michael; Smith, Terry J.; Khanna, Dinesh

2014-01-01

To identify components of a provisional clinical response index for thyroid eye disease (CRI-TED) using a modified Delphi technique. The International Thyroid Eye Disease Society (ITEDS) conducted a structured, 3-round Delphi exercise establishing consensus for a core set of measures for clinical trials in TED. The steering committee discussed the results in a face-to-face meeting (nominal group technique) and evaluated each criterion with respect to its feasibility, reliability, redundancy, and validity. Redundant measures were consolidated or excluded. Criteria were parsed into 11 domains for the Delphi surveys. Eighty four respondents participated in the Delphi-1 survey, providing 220 unique items. Ninety- two members (100% of the respondents from Delphi 1 plus eight new participants) responded in Delphi-2 and rated the same 220 items. Sixty-four members (76% of participants) rated 153 criteria in Delphi-3 (67 criteria were excluded due to redundancy). Criteria with a mean greater than 6 (1 least appropriate to 9 most appropriate) were further evaluated by the nominal group technique and provisional core measures were chosen. Using a Delphi exercise, we developed provisional core measures for assessing disease activity and severity in clinical trials of therapies for TED. These measures will be iteratively refined for use in multicenter clinical trials. PMID:19752424

The use of advanced web-based survey design in Delphi research.

PubMed

Helms, Christopher; Gardner, Anne; McInnes, Elizabeth

2017-12-01

A discussion of the application of metadata, paradata and embedded data in web-based survey research, using two completed Delphi surveys as examples. Metadata, paradata and embedded data use in web-based Delphi surveys has not been described in the literature. The rapid evolution and widespread use of online survey methods imply that paper-based Delphi methods will likely become obsolete. Commercially available web-based survey tools offer a convenient and affordable means of conducting Delphi research. Researchers and ethics committees may be unaware of the benefits and risks of using metadata in web-based surveys. Discussion paper. Two web-based, three-round Delphi surveys were conducted sequentially between August 2014 - January 2015 and April - May 2016. Their aims were to validate the Australian nurse practitioner metaspecialties and their respective clinical practice standards. Our discussion paper is supported by researcher experience and data obtained from conducting both web-based Delphi surveys. Researchers and ethics committees should consider the benefits and risks of metadata use in web-based survey methods. Web-based Delphi research using paradata and embedded data may introduce efficiencies that improve individual participant survey experiences and reduce attrition across iterations. Use of embedded data allows the efficient conduct of multiple simultaneous Delphi surveys across a shorter timeframe than traditional survey methods. The use of metadata, paradata and embedded data appears to improve response rates, identify bias and give possible explanation for apparent outlier responses, providing an efficient method of conducting web-based Delphi surveys. © 2017 John Wiley & Sons Ltd.

Three dimensional CFD modeling and experimental validation of a single chamber solid oxide fuel cell fed by methane

NASA Astrophysics Data System (ADS)

Nguyen, H. T.; Le, M. V.; Nguyen, T. A.; Nguyen, T. A. N.

2017-06-01

The solid oxide fuel cell is one of the promising technologies for future energy demand. Solid oxide fuel cell operated in the single-chamber mode exhibits several advantages over conventional single oxide fuel cell due to the simplified, compact, sealing-free cell structure. There are some studies on simulating the behavior of this type of fuel cell but they mainly focus on the 2D model. In the present study, a three-dimensional numerical model of a single chamber solid oxide fuel cell (SOFC) is reported and solved using COMSOL Multiphysics software. Experiments of a planar button solid oxide fuel cell were used to verify the simulation results. The system is fed by methane and oxygen and operated at 700°C. The cathode is LSCF6482, the anode is GDC-Ni, the electrolyte is LDM and the operating pressure is 1 atm. There was a good agreement between the cell temperature and current voltage estimated from the model and measured from the experiment. The results indicate that the model is applicable for the single chamber solid oxide fuel cell and it can provide a basic for the design, scale up of single chamber solid oxide fuel cell system.

Solid oxide fuel cell with single material for electrodes and interconnect

DOEpatents

McPheeters, Charles C.; Nelson, Paul A.; Dees, Dennis W.

1994-01-01

A solid oxide fuel cell having a plurality of individual cells. A solid oxide fuel cell has an anode and a cathode with electrolyte disposed therebetween, and the anode, cathode and interconnect elements are comprised of substantially one material.

Copper-substituted perovskite compositions for solid oxide fuel cell cathodes and oxygen reduction electrodes in other electrochemical devices

DOEpatents

Rieke, Peter C [Pasco, WA; Coffey, Gregory W [Richland, WA; Pederson, Larry R [Kennewick, WA; Marina, Olga A [Richland, WA; Hardy, John S [Richland, WA; Singh, Prabhaker [Richland, WA; Thomsen, Edwin C [Richland, WA

2010-07-20

The present invention provides novel compositions that find advantageous use in making electrodes for electrochemical cells. Also provided are electrochemical devices that include active oxygen reduction electrodes, such as solid oxide fuel cells, sensors, pumps and the like. The compositions comprises a copper-substituted ferrite perovskite material. The invention also provides novel methods for making and using the electrode compositions and solid oxide fuel cells and solid oxide fuel cell assemblies having cathodes comprising the compositions.

49 CFR 176.400 - Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Stowage of Division 1.5, Class 4 (flammable solids... Solids), Class 5 (Oxidizers and Organic Peroxides), and Division 1.5 Materials § 176.400 Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides) materials. (a) Class...

Solid oxide fuel cell with single material for electrodes and interconnect

DOEpatents

McPheeters, C.C.; Nelson, P.A.; Dees, D.W.

1994-07-19

A solid oxide fuel cell is described having a plurality of individual cells. A solid oxide fuel cell has an anode and a cathode with electrolyte disposed there between, and the anode, cathode and interconnect elements are comprised of substantially one material. 9 figs.

Emerging Technologies Program Integration Report. Volume 2. Background, Delphi and Workshop Data. Appendices

DTIC Science & Technology

1987-05-04

FTIILE COP’ AD-A196 840 EMERGING TECHNOLOGIES PROGRAM INTEGRATION REPORT VOLUME II BACKGROUND, DELPHI AND WORKSHOP DATA, APPENDICES . -- PREPARED...Security Classification) Emerging Technologies Program Integration Report Volume II: Background, Delphi and Workshop Data; Appendices (U) 12 PERSONAL...volumes of this integration report assess and synthesize information gathered through a Delphi survey, defense needs prioritization workshops, and

Using the Delphi technique in economic evaluation: time to revisit the oracle?

PubMed

Simoens, S

2006-12-01

Although the Delphi technique has been commonly used as a data source in medical and health services research, its application in economic evaluation of medicines has been more limited. The aim of this study was to describe the methodology of the Delphi technique, to present a case for using the technique in economic evaluation, and to provide recommendations to improve such use. The literature was accessed through MEDLINE focusing on studies discussing the methodology of the Delphi technique and economic evaluations of medicines using the Delphi technique. The Delphi technique can be used to provide estimates of health care resources required and to modify such estimates when making inter-country comparisons. The Delphi technique can also contribute to mapping the treatment process under investigation, to identifying the appropriate comparator to be used, and to ensuring that the economic evaluation estimates cost-effectiveness rather than cost-efficacy. Ideally, economic evaluations of medicines should be based on real-patient data. In the absence of such data, evaluations need to incorporate the best evidence available by employing approaches such as the Delphi technique. Evaluations based on this approach should state the limitations, and explore the impact of the associated uncertainty in the results.

DelPhi Web Server: A comprehensive online suite for electrostatic calculations of biological macromolecules and their complexes

PubMed Central

Sarkar, Subhra; Witham, Shawn; Zhang, Jie; Zhenirovskyy, Maxim; Rocchia, Walter; Alexov, Emil

2011-01-01

Here we report a web server, the DelPhi web server, which utilizes DelPhi program to calculate electrostatic energies and the corresponding electrostatic potential and ionic distributions, and dielectric map. The server provides extra services to fix structural defects, as missing atoms in the structural file and allows for generation of missing hydrogen atoms. The hydrogen placement and the corresponding DelPhi calculations can be done with user selected force field parameters being either Charmm22, Amber98 or OPLS. Upon completion of the calculations, the user is given option to download fixed and protonated structural file, together with the parameter and Delphi output files for further analysis. Utilizing Jmol viewer, the user can see the corresponding structural file, to manipulate it and to change the presentation. In addition, if the potential map is requested to be calculated, the potential can be mapped onto the molecule surface. The DelPhi web server is available from http://compbio.clemson.edu/delphi_webserver. PMID:24683424

[Application of Delphi method in traditional Chinese medicine clinical research].

PubMed

Bi, Ying-fei; Mao, Jing-yuan

2012-03-01

In recent years, Delphi method has been widely applied in traditional Chinese medicine (TCM) clinical research. This article analyzed the present application situation of Delphi method in TCM clinical research, and discussed some problems presented in the choice of evaluation method, classification of observation indexes and selection of survey items. On the basis of present application of Delphi method, the author analyzed the method on questionnaire making, selection of experts, evaluation of observation indexes and selection of survey items. Furthermore, the author summarized the steps of application of Delphi method in TCM clinical research.

Application of the Delphi technique in healthcare maintenance.

PubMed

Njuangang, Stanley; Liyanage, Champika; Akintoye, Akintola

2017-10-09

Purpose The purpose of this paper is to examine the research design, issues and considerations in the application of the Delphi technique to identify, refine and rate the critical success factors and performance measures in maintenance-associated infections. Design/methodology/approach In-depth literature review through the application of open and axial coding were applied to formulate the interview and research questions. These were used to conduct an exploratory case study of two healthcare maintenance managers, randomly selected from two National Health Service Foundation Trusts in England. The results of exploratory case study provided the rationale for the application of the Delphi technique in this research. The different processes in the application of the Delphi technique in healthcare research are examined thoroughly. Findings This research demonstrates the need to apply and integrate different research methods to enhance the validity of the Delphi technique. The rationale for the application of the Delphi technique in this research is because some healthcare maintenance managers lack knowledge about basic infection control (IC) principles to make hospitals safe for patient care. The result of first round of the Delphi exercise is a useful contribution in its own rights. It identified a number of salient issues and differences in the opinions of the Delphi participants, noticeably between healthcare maintenance managers and members of the infection control team. It also resulted in useful suggestions and comments to improve the quality and presentation of the second- and third-round Delphi instruments. Practical implications This research provides a research methodology that can be adopted by researchers investigating new and emerging issues in the healthcare sector. As this research demonstrates, the Delphi technique is relevant in soliciting expert knowledge and opinion to identify performance measures to control maintenance-associated infections in hospitals. The methodology provided here could be applied by other researchers elsewhere to probe, investigate and generate rich information about new and emerging healthcare research topics. Originality/value The authors demonstrate how different research methods can be integrated to enhance the validity of the Delphi technique. For example, the results of an exploratory case study provided the rationale for the application of the Delphi technique investigating the key performance measures in maintenance-associated infections. The different processes involved in the application of the Delphi technique are also carefully explored and discussed in depth.

Gadamerian philosophical hermeneutics as a useful methodological framework for the Delphi technique.

PubMed

Guzys, Diana; Dickson-Swift, Virginia; Kenny, Amanda; Threlkeld, Guinever

2015-01-01

In this article we aim to demonstrate how Gadamerian philosophical hermeneutics may provide a sound methodological framework for researchers using the Delphi Technique (Delphi) in studies exploring health and well-being. Reporting of the use of Delphi in health and well-being research is increasing, but less attention has been given to covering its methodological underpinnings. In Delphi, a structured anonymous conversation between participants is facilitated, via an iterative survey process. Participants are specifically selected for their knowledge and experience with the topic of interest. The purpose of structuring conversation in this manner is to cultivate collective opinion and highlight areas of disagreement, using a process that minimizes the influence of group dynamics. The underlying premise is that the opinion of a collective is more useful than that of an individual. In designing our study into health literacy, Delphi aligned well with our research focus and would enable us to capture collective views. However, we were interested in the methodology that would inform our study. As researchers, we believe that methodology provides the framework and principles for a study and is integral to research integrity. In assessing the suitability of Delphi for our research purpose, we found little information about underpinning methodology. The absence of a universally recognized or consistent methodology associated with Delphi was highlighted through a scoping review we undertook to assist us in our methodological thinking. This led us to consider alternative methodologies, which might be congruent with the key principles of Delphi. We identified Gadamerian philosophical hermeneutics as a methodology that could provide a supportive framework and principles. We suggest that this methodology may be useful in health and well-being studies utilizing the Delphi method.

Gadamerian philosophical hermeneutics as a useful methodological framework for the Delphi technique

PubMed Central

Guzys, Diana; Dickson-Swift, Virginia; Kenny, Amanda; Threlkeld, Guinever

2015-01-01

In this article we aim to demonstrate how Gadamerian philosophical hermeneutics may provide a sound methodological framework for researchers using the Delphi Technique (Delphi) in studies exploring health and well-being. Reporting of the use of Delphi in health and well-being research is increasing, but less attention has been given to covering its methodological underpinnings. In Delphi, a structured anonymous conversation between participants is facilitated, via an iterative survey process. Participants are specifically selected for their knowledge and experience with the topic of interest. The purpose of structuring conversation in this manner is to cultivate collective opinion and highlight areas of disagreement, using a process that minimizes the influence of group dynamics. The underlying premise is that the opinion of a collective is more useful than that of an individual. In designing our study into health literacy, Delphi aligned well with our research focus and would enable us to capture collective views. However, we were interested in the methodology that would inform our study. As researchers, we believe that methodology provides the framework and principles for a study and is integral to research integrity. In assessing the suitability of Delphi for our research purpose, we found little information about underpinning methodology. The absence of a universally recognized or consistent methodology associated with Delphi was highlighted through a scoping review we undertook to assist us in our methodological thinking. This led us to consider alternative methodologies, which might be congruent with the key principles of Delphi. We identified Gadamerian philosophical hermeneutics as a methodology that could provide a supportive framework and principles. We suggest that this methodology may be useful in health and well-being studies utilizing the Delphi method. PMID:25948132

Solid oxide fuel cell operable over wide temperature range

DOEpatents

Baozhen, Li; Ruka, Roswell J.; Singhal, Subhash C.

2001-01-01

Solid oxide fuel cells having improved low-temperature operation are disclosed. In one embodiment, an interfacial layer of terbia-stabilized zirconia is located between the air electrode and electrolyte of the solid oxide fuel cell. The interfacial layer provides a barrier which controls interaction between the air electrode and electrolyte. The interfacial layer also reduces polarization loss through the reduction of the air electrode/electrolyte interfacial electrical resistance. In another embodiment, the solid oxide fuel cell comprises a scandia-stabilized zirconia electrolyte having high electrical conductivity. The scandia-stabilized zirconia electrolyte may be provided as a very thin layer in order to reduce resistance. The scandia-stabilized electrolyte is preferably used in combination with the terbia-stabilized interfacial layer. The solid oxide fuel cells are operable over wider temperature ranges and wider temperature gradients in comparison with conventional fuel cells.

Interfacial material for solid oxide fuel cell

DOEpatents

Baozhen, Li; Ruka, Roswell J.; Singhal, Subhash C.

1999-01-01

Solid oxide fuel cells having improved low-temperature operation are disclosed. In one embodiment, an interfacial layer of terbia-stabilized zirconia is located between the air electrode and electrolyte of the solid oxide fuel cell. The interfacial layer provides a barrier which controls interaction between the air electrode and electrolyte. The interfacial layer also reduces polarization loss through the reduction of the air electrode/electrolyte interfacial electrical resistance. In another embodiment, the solid oxide fuel cell comprises a scandia-stabilized zirconia electrolyte having high electrical conductivity. The scandia-stabilized zirconia electrolyte may be provided as a very thin layer in order to reduce resistance. The scandia-stabilized electrolyte is preferably used in combination with the terbia-stabilized interfacial layer. The solid oxide fuel cells are operable over wider temperature ranges and wider temperature gradients in comparison with conventional fuel cells.

Alternative oxidation technologies for organic mixed waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borduin, L.C.; Fewell, T.

1998-07-01

The Mixed Waste Focus Area (MWFA) is currently supporting the development and demonstration of several alternative oxidation technology (AOT) processes for treatment of combustible mixed low-level wastes. AOTs have been defined as technologies that destroy organic material without using open-flame reactions. AOTs include both thermal and nonthermal processes that oxidize organic wastes but operate under significantly different physical and chemical conditions than incinerators. Nonthermal processes currently being studied include Delphi DETOX and acid digestion at the Savannah River Site (SRS), and direct chemical oxidation at Lawrence Livermore National Laboratory (LLNL). All three technologies are at advanced stages of development ormore » are entering the demonstration phase. Nonflame thermal processes include catalytic chemical oxidation, which is being developed and deployed at Lawrence Berkeley National Laboratory (LBNL), and steam reforming, a commercial process being supported by the Department of Energy (DOE). Although testing is complete on some AOT technologies, most require additional support to complete some or all of the identified development objectives. Brief descriptions, status, and planned paths forward for each of the technologies are presented.« less

Fluidized-bed catalytic coal-gasification process. [US patent; pretreatment to minimize agglomeration

DOEpatents

Euker, C.A. Jr.; Wesselhoft, R.D.; Dunkleman, J.J.; Aquino, D.C.; Gouker, T.R.

1981-09-14

Coal or similar carbonaceous solids impregnated with gasification catalyst constituents are oxidized by contact with a gas containing between 2 vol % and 21 vol % oxygen at a temperature between 50 and 250/sup 0/C in an oxidation zone and the resultant oxidized, catalyst impregnated solids are then gasified in a fluidized bed gasification zone at an elevated pressure. The oxidation of the catalyst impregnated solids under these conditions insures that the bed density in the fluidized bed gasification zone will be relatively high even though the solids are gasified at elevated pressure and temperature.

Detailed Multi-dimensional Modeling of Direct Internal Reforming Solid Oxide Fuel Cells.

PubMed

Tseronis, K; Fragkopoulos, I S; Bonis, I; Theodoropoulos, C

2016-06-01

Fuel flexibility is a significant advantage of solid oxide fuel cells (SOFCs) and can be attributed to their high operating temperature. Here we consider a direct internal reforming solid oxide fuel cell setup in which a separate fuel reformer is not required. We construct a multidimensional, detailed model of a planar solid oxide fuel cell, where mass transport in the fuel channel is modeled using the Stefan-Maxwell model, whereas the mass transport within the porous electrodes is simulated using the Dusty-Gas model. The resulting highly nonlinear model is built into COMSOL Multiphysics, a commercial computational fluid dynamics software, and is validated against experimental data from the literature. A number of parametric studies is performed to obtain insights on the direct internal reforming solid oxide fuel cell system behavior and efficiency, to aid the design procedure. It is shown that internal reforming results in temperature drop close to the inlet and that the direct internal reforming solid oxide fuel cell performance can be enhanced by increasing the operating temperature. It is also observed that decreases in the inlet temperature result in smoother temperature profiles and in the formation of reduced thermal gradients. Furthermore, the direct internal reforming solid oxide fuel cell performance was found to be affected by the thickness of the electrochemically-active anode catalyst layer, although not always substantially, due to the counter-balancing behavior of the activation and ohmic overpotentials.

Academic Primer Series: Key Papers About Competency-Based Medical Education.

PubMed

Cooney, Robert; Chan, Teresa M; Gottlieb, Michael; Abraham, Michael; Alden, Sylvia; Mongelluzzo, Jillian; Pasirstein, Michael; Sherbino, Jonathan

2017-06-01

Competency-based medical education (CBME) presents a paradigm shift in medical training. This outcome-based education movement has triggered substantive changes across the globe. Since this transition is only beginning, many faculty members may not have experience with CBME nor a solid foundation in the grounding literature. We identify and summarize key papers to help faculty members learn more about CBME. Based on the online discussions of the 2016-2017 ALiEM Faculty Incubator program, a series of papers on the topic of CBME was developed. Augmenting this list with suggestions by a guest expert and by an open call on Twitter for other important papers, we were able to generate a list of 21 papers in total. Subsequently, we used a modified Delphi study methodology to narrow the list to key papers that describe the importance and significance for educators interested in learning about CBME. To determine the most impactful papers, the mixed junior and senior faculty authorship group used three-round voting methodology based upon the Delphi method. Summaries of the five most highly rated papers on the topic of CBME, as determined by this modified Delphi approach, are presented in this paper. Major themes include a definition of core CBME themes, CBME principles to consider in the design of curricula, a history of the development of the CBME movement, and a rationale for changes to accreditation with CBME. The application of the study findings to junior faculty and faculty developers is discussed. We present five key papers on CBME that junior faculty members and faculty experts identified as essential to faculty development. These papers are a mix of foundational and explanatory papers that may provide a basis from which junior faculty members may build upon as they help to implement CBME programs.

DelPhi web server v2: incorporating atomic-style geometrical figures into the computational protocol.

PubMed

Smith, Nicholas; Witham, Shawn; Sarkar, Subhra; Zhang, Jie; Li, Lin; Li, Chuan; Alexov, Emil

2012-06-15

A new edition of the DelPhi web server, DelPhi web server v2, is released to include atomic presentation of geometrical figures. These geometrical objects can be used to model nano-size objects together with real biological macromolecules. The position and size of the object can be manipulated by the user in real time until desired results are achieved. The server fixes structural defects, adds hydrogen atoms and calculates electrostatic energies and the corresponding electrostatic potential and ionic distributions. The web server follows a client-server architecture built on PHP and HTML and utilizes DelPhi software. The computation is carried out on supercomputer cluster and results are given back to the user via http protocol, including the ability to visualize the structure and corresponding electrostatic potential via Jmol implementation. The DelPhi web server is available from http://compbio.clemson.edu/delphi_webserver.

Enhanced reversibility and durability of a solid oxide Fe-air redox battery by carbothermic reaction derived energy storage materials.

PubMed

Zhao, Xuan; Li, Xue; Gong, Yunhui; Huang, Kevin

2014-01-18

The recently developed solid oxide metal-air redox battery is a new technology capable of high-rate chemistry. Here we report that the performance, reversibility and stability of a solid oxide iron-air redox battery can be significantly improved by nanostructuring energy storage materials from a carbothermic reaction.

Roles of Cationic and Elemental Calcium in the Electro-Reduction of Solid Metal Oxides in Molten Calcium Chloride

NASA Astrophysics Data System (ADS)

Qiu, Guohong; Jiang, Kai; Ma, Meng; Wang, Dihua; Jin, Xianbo; Chen, George Z.

2007-06-01

Previous work, mainly from this research group, is re-visited on electrochemical reduction of solid metal oxides, in the form of compacted powder, in molten CaCl2, aiming at further understanding of the roles of cationic and elemental calcium. The discussion focuses on six aspects: 1.) debate on two mechanisms proposed in the literature, i. e. electro-metallothermic reduction and electro-reduction (or electro-deoxidation), for the electrolytic removal of oxygen from solid metals or metal oxides in molten CaCl2; 2.) novel metallic cavity working electrodes for electrochemical investigations of compacted metal oxide powders in high temperature molten salts assisted by a quartz sealed Ag/AgCl reference electrode (650 ºC- 950 ºC); 3.) influence of elemental calcium on the background current observed during electrolysis of solid metal oxides in molten CaCl2; 4.) electrochemical insertion/ inclusion of cationic calcium into solid metal oxides; 5.) typical features of cyclic voltammetry and chronoamperometry (potentiostatic electrolysis) of metal oxide powders in molten CaCl2; and 6.) some kinetic considerations on the electrolytic removal of oxygen.

Liquid-phase and solid-phase microwave irradiations for reduction of graphite oxide

NASA Astrophysics Data System (ADS)

Zhao, Na; Wen, Chen-Yu; Zhang, David Wei; Wu, Dong-Ping; Zhang, Zhi-Bin; Zhang, Shi-Li

2014-12-01

In this paper, two microwave irradiation methods: (i) liquid-phase microwave irradiation (MWI) reduction of graphite oxide suspension dissolved in de-ionized water and N, N-dimethylformamide, respectively, and (ii) solid-phase MWI reduction of graphite oxide powder have been successfully carried out to reduce graphite oxide. The reduced graphene oxide products are thoroughly characterized by scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectral analysis, Raman spectroscopy, UV-Vis absorption spectral analysis, and four-point probe conductivity measurements. The results show that both methods can efficiently remove the oxygen-containing functional groups attached to the graphite layers, though the solid-phase MWI reduction method can obtain far more efficiently a higher quality-reduced graphene oxide with fewer defects. The I(D)/I(G) ratio of the solid-phase MWI sample is as low as 0.46, which is only half of that of the liquid-phase MWI samples. The electrical conductivity of the reduced graphene oxide by the solid method reaches 747.9 S/m, which is about 25 times higher than that made by the liquid-phase method.

Rating scale for the assessment of competence in ultrasound-guided peripheral vascular access - a Delphi Consensus Study.

PubMed

Primdahl, Stine C; Todsen, Tobias; Clemmesen, Louise; Knudsen, Lars; Weile, Jesper

2016-09-21

Peripheral vascular access is vital for treatment and diagnostics of hospitalized patients. Ultrasound-guided vascular access (UGVA) is superior to the landmark technique. To ensure competence-based education, an assessment tool of UGVA competence is needed. We aimed to develop a global rating scale (RS) for assessment of UGVA competence based on opinions on the content from ultrasound experts in a modified Delphi consensus study. We included experts from anesthesiology, emergency medicine and radiology across university hospitals in Denmark. Nine elements were drafted based on existing literature and recommendations from international societies. In a multi-round survey, the experts rated the elements on a five-point Likert scale according to importance, and suggested missing elements. The final Delphi round occurred when >80% of the experts rated all elements ≥4 on the Likert scale. Sixteen experts consented to participate in the study, one withdrew consent prior to the first Delphi round, and 14 completed all three Delphi rounds. In the first Delphi round the experts excluded one element from the scale and changed the content of two elements. In the second Delphi round, the experts excluded one element from the scale. In the third Delphi round, consensus was obtained on the eight elements: preparation of utensils, ergonomics, preparation of the ultrasound device, identification of blood vessels, anatomy, hygiene, coordination of the needle, and completion of the procedure. We developed an RS for assessment of UGVA competence based on opinions of ultrasound experts through a modified Delphi consensus study.

Small Systems Use of a Solid Arsenic Oxidizing Media in Place of Chemical Oxidation to Enhance Arsenic Removal

EPA Science Inventory

Presentation provides information on the need to oxidize As III to As V to increase arsenic removal followed by information on the results of an arsenic demonstration project (Plainview CDS) using a solid oxidizing media (Filox) to oxidize As III. The presentation includes a sho...

Remediation System Evaluation, Delphi Corporation Site in Vandalia, Ohio

EPA Pesticide Factsheets

This RSE pertains to aspects of the corrective action underway at two neighboring plants, the Delphi Energy and Chassis Systems Plant and Delphi Safety and Interior Systems Plant, collectively referred to as the “facility” in this report.

Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation.

PubMed

Birko, Stanislav; Dove, Edward S; Özdemir, Vural

2015-01-01

The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger's Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss' Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts' opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0.087 and 0.083, respectively). Scholars in technology design, foresight research and future(s) studies might consider these new findings in strategic planning of Delphi studies, for example, in rational choice of consensus indices and sample size, or accounting for confounding factors such as experts' variable degrees of conformity (stubbornness/flexibility) in modifying their opinions.

Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation

PubMed Central

Birko, Stanislav; Dove, Edward S.; Özdemir, Vural

2015-01-01

The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger’s Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss’ Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts’ opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0.087 and 0.083, respectively). Scholars in technology design, foresight research and future(s) studies might consider these new findings in strategic planning of Delphi studies, for example, in rational choice of consensus indices and sample size, or accounting for confounding factors such as experts’ variable degrees of conformity (stubbornness/flexibility) in modifying their opinions. PMID:26270647

Sustainable synthesis of aldehydes, ketones or acids from neat alcohols using nitrogen dioxide gas, and related reactions.

PubMed

Naimi-Jamal, M Reza; Hamzeali, Hamideh; Mokhtari, Javad; Boy, Jürgen; Kaupp, Gerd

2009-01-01

Benzylic alcohols are quantitatively oxidized by gaseous nitrogen dioxide to give pure aromatic aldehydes. The reaction gas mixtures are transformed to nitric acid, which renders the processes free of waste. The exothermic gas-liquid or gas-solid reactions profit from the solubility of nitrogen dioxide in the neat benzylic alcohols. The acid formed impedes further oxidation of the benzaldehydes. The neat isolated benzaldehydes and nitrogen dioxide quantitatively give the benzoic acids. Solid long-chain primary alcohols are directly and quantitatively oxidized with nitrogen dioxide gas to give the fatty acids in the solid state. The oxidations with ubiquitous nitrogen dioxide are extended to solid heterocyclic thioamides, which gives disulfides, and to diphenylamine, which gives tetraphenylhydrazine. These sustainable (green) specific oxidation procedures produce no dangerous residues from the oxidizing agent or from auxiliaries.

Tailoring gadolinium-doped ceria-based solid oxide fuel cells to achieve 2 W cm(-2) at 550 °C.

PubMed

Lee, Jin Goo; Park, Jeong Ho; Shul, Yong Gun

2014-06-04

Low-temperature operation is necessary for next-generation solid oxide fuel cells due to the wide variety of their applications. However, significant increases in the fuel cell losses appear in the low-temperature solid oxide fuel cells, which reduce the cell performance. To overcome this problem, here we report Gd0.1Ce0.9O1.95-based low-temperature solid oxide fuel cells with nanocomposite anode functional layers, thin electrolytes and core/shell fibre-structured Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Gd0.1Ce0.9O1.95 cathodes. In particular, the report describes the use of the advanced electrospinning and Pechini process in the preparation of the core/shell-fibre-structured cathodes. The fuel cells show a very high performance of 2 W cm(-2) at 550 °C in hydrogen, and are stable for 300 h even under the high current density of 1 A cm(-2). Hence, the results suggest that stable and high-performance solid oxide fuel cells at low temperatures can be achieved by modifying the microstructures of solid oxide fuel cell components.

Electrolytes for solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Fergus, Jeffrey W.

The high operating temperature of solid oxide fuel cells (SOFCs), as compared to polymer electrolyte membrane fuel cells (PEMFCs), improves tolerance to impurities in the fuel, but also creates challenges in the development of suitable materials for the various fuel cell components. In response to these challenges, intermediate temperature solid oxide fuel cells (IT-SOFCs) are being developed to reduce high-temperature material requirements, which will extend useful lifetime, improve durability and reduce cost, while maintaining good fuel flexibility. A major challenge in reducing the operating temperature of SOFCs is the development of solid electrolyte materials with sufficient conductivity to maintain acceptably low ohmic losses during operation. In this paper, solid electrolytes being developed for solid oxide fuel cells, including zirconia-, ceria- and lanthanum gallate-based materials, are reviewed and compared. The focus is on the conductivity, but other issues, such as compatibility with electrode materials, are also discussed.

Detailed Multi‐dimensional Modeling of Direct Internal Reforming Solid Oxide Fuel Cells

PubMed Central

Tseronis, K.; Fragkopoulos, I.S.; Bonis, I.

2016-01-01

Abstract Fuel flexibility is a significant advantage of solid oxide fuel cells (SOFCs) and can be attributed to their high operating temperature. Here we consider a direct internal reforming solid oxide fuel cell setup in which a separate fuel reformer is not required. We construct a multidimensional, detailed model of a planar solid oxide fuel cell, where mass transport in the fuel channel is modeled using the Stefan‐Maxwell model, whereas the mass transport within the porous electrodes is simulated using the Dusty‐Gas model. The resulting highly nonlinear model is built into COMSOL Multiphysics, a commercial computational fluid dynamics software, and is validated against experimental data from the literature. A number of parametric studies is performed to obtain insights on the direct internal reforming solid oxide fuel cell system behavior and efficiency, to aid the design procedure. It is shown that internal reforming results in temperature drop close to the inlet and that the direct internal reforming solid oxide fuel cell performance can be enhanced by increasing the operating temperature. It is also observed that decreases in the inlet temperature result in smoother temperature profiles and in the formation of reduced thermal gradients. Furthermore, the direct internal reforming solid oxide fuel cell performance was found to be affected by the thickness of the electrochemically‐active anode catalyst layer, although not always substantially, due to the counter‐balancing behavior of the activation and ohmic overpotentials. PMID:27570502

Expert Consensus for Discharge Referral Decisions Using Online Delphi

PubMed Central

Bowles, Kathy H.; Holmes, John H.; Naylor, Mary D.; Liberatore, Matthew; Nydick, Robert

2003-01-01

This paper describes the results of using a modified Delphi approach designed to achieve consensus from eight discharge planning experts regarding the decision to refer hospitalized older adults for post-discharge follow-up. Experts reviewed 150 cases using an online website designed to facilitate their interaction and efforts to reach agreement on the need for a referral for post-discharge care and the appropriate site for such care. In contrast to an average of eight weeks to complete just 50 cases using the traditional mail method, the first online Delphi round for 150 cases were completed in six weeks. Data provided by experts suggest that online Delphi is a time efficient and acceptable methodology for reaching group consensus. Other benefits include instant access to Delphi decision results, live knowledge of the time requirements and progress of each expert, and cost savings in postage, paper, copying, and storage of paper documents. This online Delphi methodology is highly recommended. PMID:14728143

Using the Delphi expert consensus method in mental health research.

PubMed

Jorm, Anthony F

2015-10-01

The article gives an introductory overview of the use of the Delphi expert consensus method in mental health research. It explains the rationale for using the method, examines the range of uses to which it has been put in mental health research, and describes the stages of carrying out a Delphi study using examples from the literature. To ascertain the range of uses, a systematic search was carried out in PubMed. The article also examines the implications of 'wisdom of crowds' research for how to conduct Delphi studies. The Delphi method is a systematic way of determining expert consensus that is useful for answering questions that are not amenable to experimental and epidemiological methods. The validity of the approach is supported by 'wisdom of crowds' research showing that groups can make good judgements under certain conditions. In mental health research, the Delphi method has been used for making estimations where there is incomplete evidence (e.g. What is the global prevalence of dementia?), making predictions (e.g. What types of interactions with a person who is suicidal will reduce their chance of suicide?), determining collective values (e.g. What areas of research should be given greatest priority?) and defining foundational concepts (e.g. How should we define 'relapse'?). A range of experts have been used in Delphi research, including clinicians, researchers, consumers and caregivers. The Delphi method has a wide range of potential uses in mental health research. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Nanocrystal-polymer nanocomposite electrochromic device

DOEpatents

Milliron, Delia; Runnerstrom, Evan; Helms, Brett; Llordes, Anna; Buonsanti, Raffaella; Garcia, Guillermo

2015-12-08

Described is an electrochromic nanocomposite film comprising a solid matrix of an oxide based material, the solid matrix comprising a plurality of transparent conducting oxide (TCO) nanostructures dispersed in the solid matrix and a lithium salt dispersed in the solid matrix. Also described is a near infrared nanostructured electrochromic device having a functional layer comprising the electrochromic nanocomposite film.

Electrical Generation for More-Electric Aircraft Using Solid Oxide Fuel Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whyatt, Greg A.; Chick, Lawrence A.

This report examines the potential for Solid-Oxide Fuel Cells (SOFC) to provide electrical generation on-board commercial aircraft. Unlike a turbine-based auxiliary power unit (APU) a solid oxide fuel cell power unit (SOFCPU) would be more efficient than using the main engine generators to generate electricity and would operate continuously during flight. The focus of this study is on more-electric aircraft which minimize bleed air extraction from the engines and instead use electrical power obtained from generators driven by the main engines to satisfy all major loads. The increased electrical generation increases the potential fuel savings obtainable through more efficient electricalmore » generation using a SOFCPU. However, the weight added to the aircraft by the SOFCPU impacts the main engine fuel consumption which reduces the potential fuel savings. To investigate these relationships the Boeing 787­8 was used as a case study. The potential performance of the SOFCPU was determined by coupling flowsheet modeling using ChemCAD software with a stack performance algorithm. For a given stack operating condition (cell voltage, anode utilization, stack pressure, target cell exit temperature), ChemCAD software was used to determine the cathode air rate to provide stack thermal balance, the heat exchanger duties, the gross power output for a given fuel rate, the parasitic power for the anode recycle blower and net power obtained from (or required by) the compressor/expander. The SOFC is based on the Gen4 Delphi planar SOFC with assumed modifications to tailor it to this application. The size of the stack needed to satisfy the specified condition was assessed using an empirically-based algorithm. The algorithm predicts stack power density based on the pressure, inlet temperature, cell voltage and anode and cathode inlet flows and compositions. The algorithm was developed by enhancing a model for a well-established material set operating at atmospheric pressure to reflect the effect of elevated pressure and to represent the expected enhancement obtained using a promising cell material set which has been tested in button cells but not yet used to produce full-scale stacks. The predictions for the effect of pressure on stack performance were based on literature. As part of this study, additional data were obtained on button cells at elevated pressure to confirm the validity of the predictions. The impact of adding weight to the 787-8 fuel consumption was determined as a function of flight distance using a PianoX model. A conceptual design for a SOFC power system for the Boeing 787 is developed and the weight estimated. The results indicate that the power density of the stacks must increase by at least a factor of 2 to begin saving fuel on the 787 aircraft. However, the conceptual design of the power system may still be useful for other applications which are less weight sensitive.« less

78 FR 48468 - Delphi Corporation, Electronics and Safety Division, Including On-Site Leased Workers From...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

..., Electronics and Safety Division, Including On-Site Leased Workers From Securitas, Bartech, Flint Janitorial... Adjustment Assistance on May 20, 2013, applicable to workers of Delphi Corporation, Electronics and Safety... on- site at the Flint, Michigan location of Delphi Corporation, Electronics and Safety Division. The...

Delphi: An Overview, An Application, Some Lessons.

ERIC Educational Resources Information Center

Moore, Carl M.; Coke, James G.

This paper discusses Delphi-a method of utilizing individuals' knowledge, judgment, and opinions to address complex questions and applies the method to a community planning project in Stow, Ohio. There are four phases of any Delphi: (1) exploring the subject under discussion, with each individual contributing pertinent information, (2) reaching an…

75 FR 20383 - Delphi Thermal Systems Currently Known as General Motors Components Holdings LLC, Lockport...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-63,818] Delphi Thermal Systems... 25, 2008, applicable to workers of Delphi Thermal Systems, Lockport Operations, Lockport, New York... workers are engaged in activities related to the production of automotive heat exchanger products and HVAC...

Defining consensus: a systematic review recommends methodologic criteria for reporting of Delphi studies.

PubMed

Diamond, Ivan R; Grant, Robert C; Feldman, Brian M; Pencharz, Paul B; Ling, Simon C; Moore, Aideen M; Wales, Paul W

2014-04-01

To investigate how consensus is operationalized in Delphi studies and to explore the role of consensus in determining the results of these studies. Systematic review of a random sample of 100 English language Delphi studies, from two large multidisciplinary databases [ISI Web of Science (Thompson Reuters, New York, NY) and Scopus (Elsevier, Amsterdam, NL)], published between 2000 and 2009. About 98 of the Delphi studies purported to assess consensus, although a definition for consensus was only provided in 72 of the studies (64 a priori). The most common definition for consensus was percent agreement (25 studies), with 75% being the median threshold to define consensus. Although the authors concluded in 86 of the studies that consensus was achieved, consensus was only specified a priori (with a threshold value) in 42 of these studies. Achievement of consensus was related to the decision to stop the Delphi study in only 23 studies, with 70 studies terminating after a specified number of rounds. Although consensus generally is felt to be of primary importance to the Delphi process, definitions of consensus vary widely and are poorly reported. Improved criteria for reporting of methods of Delphi studies are required. Copyright © 2014 Elsevier Inc. All rights reserved.

Use of a Computer-Mediated Delphi Process to Validate a Mass Casualty Conceptual Model

PubMed Central

CULLEY, JOAN M.

2012-01-01

Since the original work on the Delphi technique, multiple versions have been developed and used in research and industry; however, very little empirical research has been conducted that evaluates the efficacy of using online computer, Internet, and e-mail applications to facilitate a Delphi method that can be used to validate theoretical models. The purpose of this research was to develop computer, Internet, and e-mail applications to facilitate a modified Delphi technique through which experts provide validation for a proposed conceptual model that describes the information needs for a mass-casualty continuum of care. Extant literature and existing theoretical models provided the basis for model development. Two rounds of the Delphi process were needed to satisfy the criteria for consensus and/or stability related to the constructs, relationships, and indicators in the model. The majority of experts rated the online processes favorably (mean of 6.1 on a seven-point scale). Using online Internet and computer applications to facilitate a modified Delphi process offers much promise for future research involving model building or validation. The online Delphi process provided an effective methodology for identifying and describing the complex series of events and contextual factors that influence the way we respond to disasters. PMID:21076283

Use of a computer-mediated Delphi process to validate a mass casualty conceptual model.

PubMed

Culley, Joan M

2011-05-01

Since the original work on the Delphi technique, multiple versions have been developed and used in research and industry; however, very little empirical research has been conducted that evaluates the efficacy of using online computer, Internet, and e-mail applications to facilitate a Delphi method that can be used to validate theoretical models. The purpose of this research was to develop computer, Internet, and e-mail applications to facilitate a modified Delphi technique through which experts provide validation for a proposed conceptual model that describes the information needs for a mass-casualty continuum of care. Extant literature and existing theoretical models provided the basis for model development. Two rounds of the Delphi process were needed to satisfy the criteria for consensus and/or stability related to the constructs, relationships, and indicators in the model. The majority of experts rated the online processes favorably (mean of 6.1 on a seven-point scale). Using online Internet and computer applications to facilitate a modified Delphi process offers much promise for future research involving model building or validation. The online Delphi process provided an effective methodology for identifying and describing the complex series of events and contextual factors that influence the way we respond to disasters.

Delivery system for molten salt oxidation of solid waste

DOEpatents

Brummond, William A.; Squire, Dwight V.; Robinson, Jeffrey A.; House, Palmer A.

2002-01-01

The present invention is a delivery system for safety injecting solid waste particles, including mixed wastes, into a molten salt bath for destruction by the process of molten salt oxidation. The delivery system includes a feeder system and an injector that allow the solid waste stream to be accurately metered, evenly dispersed in the oxidant gas, and maintained at a temperature below incineration temperature while entering the molten salt reactor.

Oxygen potential of uranium--plutonium oxide as determined by controlled- atmosphere thermogravimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swanson, Gerald C.

1975-10-01

The oxygen-to-metal atom ratio, or O/M, of solid solution uranium- plutonium oxide reactor fuel is a measure of the concentration of crystal defects in the oxide which affect many fuel properties, particularly, fuel oxygen potential. Fabrication of a high-temperature oxygen electrode, employing an electro-active tip of oxygen-deficient solid-state electrolyte, intended to confirm gaseous oxygen potentials is described. Uranium oxide and plutonium oxide O/M reference materials were prepared by in situ oxidation of high purity metals in the thermobalance. A solid solution uranium-plutonium oxide O/M reference material was prepared by alloying the uranium and plutonium metals in a yttrium oxide cruciblemore » at 1200°C and oxidizing with moist He at 250°C. The individual and solid solution oxides were isothermally equilibrated with controlled oxygen potentials between 800 and 1300°C and the equilibrated O/ M ratios calculated with corrections for impurities and buoyancy effects. Use of a reference oxygen potential of -100 kcal/mol to produce an O/M of 2.000 is confirmed by these results. However, because of the lengthy equilibration times required for all oxides, use of the O/M reference materials rather than a reference oxygen potential is recommended for O/M analysis methods calibrations.« less

Colossal super saturation of oxygen at the iron-aluminum interfaces fabricated using solid state welding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sridharan, Niyanth; Isheim, D.; Seidman, David N.

Solid state joining is achieved in three steps, (i) interface asperity deformation, (ii) oxide dispersion, followed by (iii) atomic contact and bonding. Atomically clean metallic surfaces without an oxide layer bond spontaneously. Despite its importance the oxide dispersion mechanism is not well studied. In this work the first ever atom probe study of iron-aluminum solid state welds show that the oxygen concentration at the interface is 20 at.%. This is significantly lower than any equilibrium oxide concentration. Here, we therefore propose that the high-strain rate deformation at the interfaces renders the oxide unstable resulting in the observed concentration of oxygen.

Colossal super saturation of oxygen at the iron-aluminum interfaces fabricated using solid state welding

DOE PAGES

Sridharan, Niyanth; Isheim, D.; Seidman, David N.; ...

2016-12-14

Solid state joining is achieved in three steps, (i) interface asperity deformation, (ii) oxide dispersion, followed by (iii) atomic contact and bonding. Atomically clean metallic surfaces without an oxide layer bond spontaneously. Despite its importance the oxide dispersion mechanism is not well studied. In this work the first ever atom probe study of iron-aluminum solid state welds show that the oxygen concentration at the interface is 20 at.%. This is significantly lower than any equilibrium oxide concentration. Here, we therefore propose that the high-strain rate deformation at the interfaces renders the oxide unstable resulting in the observed concentration of oxygen.

Guidance on Conducting and REporting DElphi Studies (CREDES) in palliative care: Recommendations based on a methodological systematic review.

PubMed

Jünger, Saskia; Payne, Sheila A; Brine, Jenny; Radbruch, Lukas; Brearley, Sarah G

2017-09-01

The Delphi technique is widely used for the development of guidance in palliative care, having impact on decisions with relevance for patient care. To systematically examine the application of the Delphi technique for the development of best practice guidelines in palliative care. A methodological systematic review was undertaken using the databases PubMed, CINAHL, Web of Science, Academic Search Complete and EMBASE. Original articles (English language) were included when reporting on empirical studies that had used the Delphi technique to develop guidance for good clinical practice in palliative care. Data extraction included a quality appraisal on the rigour in conduct of the studies and the quality of reporting. A total of 30 empirical studies (1997-2015) were considered for full-text analysis. Considerable differences were identified regarding the rigour of the design and the reporting of essential process and outcome parameters. Furthermore, discrepancies regarding the use of terms for describing the method were observed, for example, concerning the understanding of a 'round' or a 'modified Delphi study'. Substantial variation was found concerning the quality of the study conduct and the transparency of reporting of Delphi studies used for the development of best practice guidance in palliative care. Since credibility of the resulting recommendations depends on the rigorous use of the Delphi technique, there is a need for consistency and quality both in the conduct and reporting of studies. To allow a critical appraisal of the methodology and the resulting guidance, a reporting standard for Conducting and REporting of DElphi Studies (CREDES) is proposed.

Experience of Delphi technique in the process of establishing consensus on core competencies.

PubMed

Raghav, Pankaja Ravi; Kumar, Dewesh; Bhardwaj, Pankaj

2016-01-01

The Department of Community Medicine and Family Medicine (CMFM) has been started as a new model for imparting the components of family medicine and delivering health-care services at primary and secondary levels in all six newly established All India Institute of Medical Sciences (AIIMS), but there is no competency-based curriculum for it. The paper aims to share the experience of Delphi method in the process of developing consensus on core competencies of the new model of CMFM in AIIMS for undergraduate medical students in India. The study adopted different approaches and methods, but Delphi was the most critical method used in this research. In Delphi, the experts were contacted by e-mail and their feedback on the same was analyzed. Two rounds of Delphi were conducted in which 150 participants were contacted in Delphi-I but only 46 responded. In Delphi-II, 26 participants responded whose responses were finally considered for analysis. Three of the core competencies namely clinician, primary-care physician, and professionalism were agreed by all the participants, and the least agreement was observed in the competencies of epidemiologist and medical teacher. The experts having more experience were less consistent as responses were changed from agree to disagree in more than 15% of participants and 6% changed from disagree to agree. Within the given constraints, the final list of competencies and skills for the discipline of CMFM compiled after the Delphi process will provide a useful insight into the development of competency-based curriculum of the subject.

DELPHI: An introduction to output layout and data content

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, C.F.

1994-08-16

DELPHI was the data summary and interpretation code used by gas diagnostics personnel during the period from 1968 through 1986. It was written by Floyd Momyer, and went through several revisions during its period of use. Described here is the final version, which provided the most extensive set of summary tables. Earlier versions of the code lacked some of the capabilities of the final version, but what they did include was of substantially the same format. DELPHI was run against most available input decks in the mid 1980s. Microfiche and hardcopy output were generated. Both now reside in our archives.more » These reruns used modified input decks, which may not have had the proper {open_quotes}trigger{close_quotes} to instruct DELPHI to output some tables. These tables could, therefore be missing from a printout even though the necessary data was present. Also, modifications to DELPHI did, in some instances, eliminate DELPHIs` capability to correctly output some of the earlier optional tables. This monologue is intended to compliment the archived printout, and to provide enough insight so that someone unfamiliar with the techniques of Gas Diagnostics can retrieve the results at some future date. DELPHI last ran on the CDC-7600 machines, and was not converted to run on the Crays when the CDC-7600`s were decommissioned. DELPHI accepted data from various analytical systems, set up data summary tables, and combined preshot tracer and detector data with these results to calculate the total production of measured species and the indicated fission yields and detector conversions.« less

49 CFR 177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic...

Code of Federal Regulations, 2014 CFR

2014-10-01

... (flammable solid) or Class 5 (oxidizing) materials shall be contained entirely within the body of the motor.... Special care shall also be taken in the loading of any motor vehicle with Class 4 (flammable solid) or... 49 Transportation 2 2014-10-01 2014-10-01 false Class 4 (flammable solid) materials, Class 5...

49 CFR 177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic...

Code of Federal Regulations, 2013 CFR

2013-10-01

... (flammable solid) or Class 5 (oxidizing) materials shall be contained entirely within the body of the motor.... Special care shall also be taken in the loading of any motor vehicle with Class 4 (flammable solid) or... 49 Transportation 2 2013-10-01 2013-10-01 false Class 4 (flammable solid) materials, Class 5...

49 CFR 177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic...

Code of Federal Regulations, 2012 CFR

2012-10-01

... (flammable solid) or Class 5 (oxidizing) materials shall be contained entirely within the body of the motor.... Special care shall also be taken in the loading of any motor vehicle with Class 4 (flammable solid) or... 49 Transportation 2 2012-10-01 2012-10-01 false Class 4 (flammable solid) materials, Class 5...

Using the Delphi Technique to Support Curriculum Development

ERIC Educational Resources Information Center

Sitlington, Helen Barbara; Coetzer, Alan John

2015-01-01

Purpose: The purpose of this paper is to present an analysis of the use of the Delphi technique to support curriculum development with a view to enhancing existing literature on use of the technique for renewal of business course curricula. Design/methodology/approach: The authors outline the Delphi process for obtaining consensus amongst a…

The Delphi Predictions of Pathology Chairmen: A Six-Year Retrospective View.

ERIC Educational Resources Information Center

Hill, Rolla B.; Goodale, Fairfield

1981-01-01

A retrospective review is reported of progress in academic pathology since 1974, when the Association of Pathology Chairmen undertook a Delphi study of pathology chairmen's expectations and desires for the future. The Delphi study was useful in alerting academic pathologists to opportunities and in coalescing activities toward achievement of…

The Delphi Method for Graduate Research

ERIC Educational Resources Information Center

Skulmoski, Gregory J.; Hartman, Francis T.; Krahn, Jennifer

2007-01-01

The Delphi method is an attractive method for graduate students completing masters and PhD level research. It is a flexible research technique that has been successfully used in our program at the University of Calgary to explore new concepts within and outside of the information systems body of knowledge. The Delphi method is an iterative process…

Personal Learning Environments and University Teacher Roles Explored Using Delphi

ERIC Educational Resources Information Center

Shaikh, Zaffar Ahmed; Khoja, Shakeel Ahmed

2014-01-01

This paper presents the results of research using an online Delphi method, which aimed to explore university teacher roles and readiness for learner-centred pedagogy, driven by personal learning environments (PLEs). Using a modified Policy Delphi technique, a group of researchers worked with 34 international experts who are university teachers by…

Exploration to Identify Professional Dispositions of School Librarians: A Delphi Study

ERIC Educational Resources Information Center

Bush, Gail; Jones, Jami L.

2010-01-01

This article reports the findings of an exploratory study to identify professional dispositions of school librarians. The authors employed the Delphi method, a qualitative research method that emphasizes expert knowledge and consensus within a particular field. The Delphi panel consisted of members of the editorial boards of nationally recognized…

Identifying Core Concepts of Cybersecurity: Results of Two Delphi Processes

ERIC Educational Resources Information Center

Parekh, Geet; DeLatte, David; Herman, Geoffrey L.; Oliva, Linda; Phatak, Dhananjay; Scheponik, Travis; Sherman, Alan T.

2018-01-01

This paper presents and analyzes results of two Delphi processes that polled cybersecurity experts to rate cybersecurity topics based on importance, difficulty, and timelessness. These ratings can be used to identify core concepts--cross-cutting ideas that connect knowledge in the discipline. The first Delphi process identified core concepts that…

Setting Priorities for Gerontological Social Work Research: A National Delphi Study

ERIC Educational Resources Information Center

Burnette, Denise; Morrow-Howell, Nancy; Chen, Li-Mei

2003-01-01

Purpose: An increasingly important task for all disciplines involved in aging research is to identify and prioritize areas for investigation. This article reports the results of a national Delphi study on setting research priorities for gerontological social work. Design and Methods: Delphi methodology, a structured process for eliciting and…

Terminating Sequential Delphi Survey Data Collection

ERIC Educational Resources Information Center

Kalaian, Sema A.; Kasim, Rafa M.

2012-01-01

The Delphi survey technique is an iterative mail or electronic (e-mail or web-based) survey method used to obtain agreement or consensus among a group of experts in a specific field on a particular issue through a well-designed and systematic multiple sequential rounds of survey administrations. Each of the multiple rounds of the Delphi survey…

Solid waste treatment processes for space station

NASA Technical Reports Server (NTRS)

Marrero, T. R.

1983-01-01

The purpose of this study was to evaluate the state-of-the-art of solid waste(s) treatment processes applicable to a Space Station. From the review of available information a source term model for solid wastes was determined. An overall system is proposed to treat solid wastes under constraints of zero-gravity and zero-leakage. This study contains discussion of more promising potential treatment processes, including supercritical water oxidation, wet air (oxygen) oxidation, and chemical oxidation. A low pressure, batch-type treament process is recommended. Processes needed for pretreatment and post-treatment are hardware already developed for space operations. The overall solid waste management system should minimize transfer of wastes from their collection point to treatment vessel.

Symmetrical, bi-electrode supported solid oxide fuel cell

NASA Technical Reports Server (NTRS)

Sofie, Stephen W. (Inventor); Cable, Thomas L. (Inventor)

2009-01-01

The present invention is a symmetrical bi-electrode supported solid oxide fuel cell comprising a sintered monolithic framework having graded pore electrode scaffolds that, upon treatment with metal solutions and heat subsequent to sintering, acquire respective anodic and cathodic catalytic activity. The invention is also a method for making such a solid oxide fuel cell. The graded pore structure of the graded pore electrode scaffolds in achieved by a novel freeze casting for YSZ tape.

Process for treating effluent from a supercritical water oxidation reactor

DOEpatents

Barnes, Charles M.; Shapiro, Carolyn

1997-01-01

A method for treating a gaseous effluent from a supercritical water oxidation reactor containing entrained solids is provided comprising the steps of expanding the gas/solids effluent from a first to a second lower pressure at a temperature at which no liquid condenses; separating the solids from the gas effluent; neutralizing the effluent to remove any acid gases; condensing the effluent; and retaining the purified effluent to the supercritical water oxidation reactor.

Oxygen partial pressure sensor

DOEpatents

Dees, D.W.

1994-09-06

A method for detecting oxygen partial pressure and an oxygen partial pressure sensor are provided. The method for measuring oxygen partial pressure includes contacting oxygen to a solid oxide electrolyte and measuring the subsequent change in electrical conductivity of the solid oxide electrolyte. A solid oxide electrolyte is utilized that contacts both a porous electrode and a nonporous electrode. The electrical conductivity of the solid oxide electrolyte is affected when oxygen from an exhaust stream permeates through the porous electrode to establish an equilibrium of oxygen anions in the electrolyte, thereby displacing electrons throughout the electrolyte to form an electron gradient. By adapting the two electrodes to sense a voltage potential between them, the change in electrolyte conductivity due to oxygen presence can be measured. 1 fig.

Oxygen partial pressure sensor

DOEpatents

Dees, Dennis W.

1994-01-01

A method for detecting oxygen partial pressure and an oxygen partial pressure sensor are provided. The method for measuring oxygen partial pressure includes contacting oxygen to a solid oxide electrolyte and measuring the subsequent change in electrical conductivity of the solid oxide electrolyte. A solid oxide electrolyte is utilized that contacts both a porous electrode and a nonporous electrode. The electrical conductivity of the solid oxide electrolyte is affected when oxygen from an exhaust stream permeates through the porous electrode to establish an equilibrium of oxygen anions in the electrolyte, thereby displacing electrons throughout the electrolyte to form an electron gradient. By adapting the two electrodes to sense a voltage potential between them, the change in electrolyte conductivity due to oxygen presence can be measured.

Using and Reporting the Delphi Method for Selecting Healthcare Quality Indicators: A Systematic Review

PubMed Central

Boulkedid, Rym; Abdoul, Hendy; Loustau, Marine; Sibony, Olivier; Alberti, Corinne

2011-01-01

Objective Delphi technique is a structured process commonly used to developed healthcare quality indicators, but there is a little recommendation for researchers who wish to use it. This study aimed 1) to describe reporting of the Delphi method to develop quality indicators, 2) to discuss specific methodological skills for quality indicators selection 3) to give guidance about this practice. Methodology and Main Finding Three electronic data bases were searched over a 30 years period (1978–2009). All articles that used the Delphi method to select quality indicators were identified. A standardized data extraction form was developed. Four domains (questionnaire preparation, expert panel, progress of the survey and Delphi results) were assessed. Of 80 included studies, quality of reporting varied significantly between items (9% for year's number of experience of the experts to 98% for the type of Delphi used). Reporting of methodological aspects needed to evaluate the reliability of the survey was insufficient: only 39% (31/80) of studies reported response rates for all rounds, 60% (48/80) that feedback was given between rounds, 77% (62/80) the method used to achieve consensus and 57% (48/80) listed quality indicators selected at the end of the survey. A modified Delphi procedure was used in 49/78 (63%) with a physical meeting of the panel members, usually between Delphi rounds. Median number of panel members was 17(Q1:11; Q3:31). In 40/70 (57%) studies, the panel included multiple stakeholders, who were healthcare professionals in 95% (38/40) of cases. Among 75 studies describing criteria to select quality indicators, 28 (37%) used validity and 17(23%) feasibility. Conclusion The use and reporting of the Delphi method for quality indicators selection need to be improved. We provide some guidance to the investigators to improve the using and reporting of the method in future surveys. PMID:21694759

Using and reporting the Delphi method for selecting healthcare quality indicators: a systematic review.

PubMed

Boulkedid, Rym; Abdoul, Hendy; Loustau, Marine; Sibony, Olivier; Alberti, Corinne

2011-01-01

Delphi technique is a structured process commonly used to developed healthcare quality indicators, but there is a little recommendation for researchers who wish to use it. This study aimed 1) to describe reporting of the Delphi method to develop quality indicators, 2) to discuss specific methodological skills for quality indicators selection 3) to give guidance about this practice. Three electronic data bases were searched over a 30 years period (1978-2009). All articles that used the Delphi method to select quality indicators were identified. A standardized data extraction form was developed. Four domains (questionnaire preparation, expert panel, progress of the survey and Delphi results) were assessed. Of 80 included studies, quality of reporting varied significantly between items (9% for year's number of experience of the experts to 98% for the type of Delphi used). Reporting of methodological aspects needed to evaluate the reliability of the survey was insufficient: only 39% (31/80) of studies reported response rates for all rounds, 60% (48/80) that feedback was given between rounds, 77% (62/80) the method used to achieve consensus and 57% (48/80) listed quality indicators selected at the end of the survey. A modified Delphi procedure was used in 49/78 (63%) with a physical meeting of the panel members, usually between Delphi rounds. Median number of panel members was 17(Q1:11; Q3:31). In 40/70 (57%) studies, the panel included multiple stakeholders, who were healthcare professionals in 95% (38/40) of cases. Among 75 studies describing criteria to select quality indicators, 28 (37%) used validity and 17(23%) feasibility. The use and reporting of the Delphi method for quality indicators selection need to be improved. We provide some guidance to the investigators to improve the using and reporting of the method in future surveys.

Cover and startup gas supply system for solid oxide fuel cell generator

DOEpatents

Singh, P.; George, R.A.

1999-07-27

A cover and startup gas supply system for a solid oxide fuel cell power generator is disclosed. Hydrocarbon fuel, such as natural gas or diesel fuel, and oxygen-containing gas are supplied to a burner. Combustion gas exiting the burner is cooled prior to delivery to the solid oxide fuel cell. The system mixes the combusted hydrocarbon fuel constituents with hydrogen which is preferably stored in solid form to obtain a non-explosive gas mixture. The system may be used to provide both non-explosive cover gas and hydrogen-rich startup gas to the fuel cell. 4 figs.

Cover and startup gas supply system for solid oxide fuel cell generator

DOEpatents

Singh, Prabhakar; George, Raymond A.

1999-01-01

A cover and startup gas supply system for a solid oxide fuel cell power generator is disclosed. Hydrocarbon fuel, such as natural gas or diesel fuel, and oxygen-containing gas are supplied to a burner. Combustion gas exiting the burner is cooled prior to delivery to the solid oxide fuel cell. The system mixes the combusted hydrocarbon fuel constituents with hydrogen which is preferably stored in solid form to obtain a non-explosive gas mixture. The system may be used to provide both non-explosive cover gas and hydrogen-rich startup gas to the fuel cell.

Study plan to identify long term national telecommunications need and priorities applying Delphi techniques (handbook). [technological forecasting - United States of America

NASA Technical Reports Server (NTRS)

1974-01-01

A handbook that explains the basic Delphi methodology and discusses modified Delphi techniques is presented. The selection of communications experts to participate in a study, the construction of questionnaires on potential communications developments, and requisite technology is treated. No two modified Delphi studies were the same, which reflects the flexibility and adaptability of the technique. Each study must be specifically tailored to a particular case, and consists of seeking a consensus of opinion among experts about a particular subject and attendant conditions that may prevail in the future.

Solid lubricant materials for high temperatures: A review

NASA Technical Reports Server (NTRS)

Sliney, Harold E.

1985-01-01

Solid lubricants that can be used above 300 C in air are discussed, including coatings and self-lubricating composite bearing materials. The lubricants considered are representative dichalcogenides, graphite, graphite fluoride, polyimides, soft oxides, oxidatively stable fluorides, and hard coating materials. A few general design considerations revelant to solid lubrication are interspersed.

Catalysts compositions for use in fuel cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chuang, Steven S.C.

2015-12-01

The present invention generally relates to the generation of electrical energy from a solid-state fuel. In one embodiment, the present invention relates to a solid-oxide fuel cell for generating electrical energy from a carbon-based fuel, and to catalysts for use in a solid-oxide fuel cell.

76 FR 46852 - Workers From Kelly Services, Working On-Site at Delphi Automotive Systems, LLC, Powertrain...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-03

... Services, Working On-Site at Delphi Automotive Systems, LLC, Powertrain Division, El Paso, TX; Amended..., 2011, applicable to leased workers from Kelly Services working on-site at Delphi Automotive Systems... automotive components. The notice will be published soon in the Federal Register. At the request of the State...

Lessons Learned from Teaching Scratch as an Introduction to Object-Oriented Programming in Delphi

ERIC Educational Resources Information Center

van Zyl, Sukie; Mentz, Elsa; Havenga, Marietjie

2016-01-01

As part of curriculum changes in South Africa, an introductory programming language, Scratch, must first be taught before switching to the well-established teaching of Delphi. The nature of programming in Scratch is considerably different from that in Delphi. It was assumed that the teaching of Scratch as introductory programming language could…

Reference Materials in LIS Instruction: A Delphi Study

ERIC Educational Resources Information Center

Rabina, Debbie

2013-01-01

This paper presents the results of a Delphi study conducted over a two-month period in 2011. The purpose of the study was to identify reference sources that should be covered in basic reference courses taught in LIS programs in the United States. The Delphi method was selected for its appropriateness in soliciting expert opinions and assessing the…

A Delphi Study: Exploring Faculty Perceptions of the Best Practices Influencing Student Persistence in Blended Courses

ERIC Educational Resources Information Center

Manning, Kim Elise

2010-01-01

This Delphi study explored the instructional practices of community college faculty who were teaching blended or Web-assisted courses and how these practices influenced student persistence. The Delphi method provided qualitative data in the form of expert advice through consensus building on the instructional practices most likely to influence…

What Is Next for Functional Requirements for Bibliographic Records? A Delphi Study

ERIC Educational Resources Information Center

Zhang, Yin; Salaba, Athena

2009-01-01

This article reports on a Delphi study conducted to determine key issues and challenges facing Functional Requirements for Bibliographic Records (FRBR) research and practice. The Delphi panel consisted of thirty-three experts in the field who participated in a three-round issue-raising and consensus-building process via a Web-based survey…

Career and Technical Education at a Crossroads: A Delphi Study

ERIC Educational Resources Information Center

Cutright, Michael W.

2011-01-01

Career and technical education in the United States has reached a critical juncture. A three round Delphi method was used to determine a consensus on the future events of career and technical education to better inform educational decision makers. Forty-one individual experts in the field were invited to serve as panelists for the Delphi study and…

Advantages and Limitations of the e-Delphi Technique: Implications for Health Education Researchers

ERIC Educational Resources Information Center

Donohoe, Holly; Stellefson, Michael; Tennant, Bethany

2012-01-01

In the last 30 years, the application of the Delphi technique has been increasing. With the recent availability and established popularity of Internet-based research tools, the Internet has been identified as a means for mitigating Delphi limitations, maximizing its advantages, and expanding the breadth of its application. The discourse on the…

A Delphi Study on Staff Bereavement Training in the Intellectual and Developmental Disabilities Field

ERIC Educational Resources Information Center

Gray, Jennifer A.; Truesdale, Jesslyn

2015-01-01

The Delphi technique was used to obtain expert panel consensus to prioritize content areas and delivery methods for developing staff grief and bereavement curriculum training in the intellectual and developmental disabilities (IDD) field. The Delphi technique was conducted with a panel of 18 experts from formal and informal disability caregiving,…

75 FR 41521 - Delphi Corporation, Automotive Holding Group, Plant 6, Currently Known as General Motors...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-62,069; TA-W-62,069A] Delphi Corporation, Automotive Holding Group, Plant 6, Currently Known as General Motors Corporation Including On-Site Leased Workers From Securitas, EDS, Bartech, Mays Chemicals, Interim Physicians, LLC and HSS Material Management, Flint, MI; Delphi...

Solid oxide fuel cell steam reforming power system

DOEpatents

Chick, Lawrence A.; Sprenkle, Vincent L.; Powell, Michael R.; Meinhardt, Kerry D.; Whyatt, Greg A.

2013-03-12

The present invention is a Solid Oxide Fuel Cell Reforming Power System that utilizes adiabatic reforming of reformate within this system. By utilizing adiabatic reforming of reformate within the system the system operates at a significantly higher efficiency than other Solid Oxide Reforming Power Systems that exist in the prior art. This is because energy is not lost while materials are cooled and reheated, instead the device operates at a higher temperature. This allows efficiencies higher than 65%.

Process for treating effluent from a supercritical water oxidation reactor

DOEpatents

Barnes, C.M.; Shapiro, C.

1997-11-25

A method for treating a gaseous effluent from a supercritical water oxidation reactor containing entrained solids is provided comprising the steps of expanding the gas/solids effluent from a first to a second lower pressure at a temperature at which no liquid condenses; separating the solids from the gas effluent; neutralizing the effluent to remove any acid gases; condensing the effluent; and retaining the purified effluent to the supercritical water oxidation reactor. 6 figs.

Why solid oxide cells can be reversibly operated in solid oxide electrolysis cell and fuel cell modes?

PubMed

Chen, Kongfa; Liu, Shu-Sheng; Ai, Na; Koyama, Michihisa; Jiang, San Ping

2015-12-14

High temperature solid oxide cells (SOCs) are attractive for storage and regeneration of renewable energy by operating reversibly in solid oxide electrolysis cell (SOEC) and solid oxide fuel cell (SOFC) modes. However, the stability of SOCs, particularly the deterioration of the performance of oxygen electrodes in the SOEC operation mode, is the most critical issue in the development of high performance and durable SOCs. In this study, we investigate in detail the electrochemical activity and stability of La0.8Sr0.2MnO3 (LSM) oxygen electrodes in cyclic SOEC and SOFC modes. The results show that the deterioration of LSM oxygen electrodes caused by anodic polarization can be partially or completely recovered by subsequent cathodic polarization. Using in situ assembled LSM electrodes without pre-sintering, we demonstrate that the deteriorated LSM/YSZ interface can be repaired and regenerated by operating the cells under cathodic polarization conditions. This study for the first time establishes the foundation for the development of truly reversible and stable SOCs for hydrogen fuel production and electricity generation in cyclic SOEC and SOFC operation modes.

Hybrid propulsion technology program: Phase 1, volume 4

NASA Technical Reports Server (NTRS)

Claflin, S. E.; Beckman, A. W.

1989-01-01

The use of a liquid oxidizer-solid fuel hybrid propellant combination in booster rocket motors appears extremely attractive due to the integration of the best features of liquid and solid propulsion systems. The hybrid rocket combines the high performance, clean exhaust, and safety of liquid propellant engines with the low cost and simplicity of solid propellant motors. Additionally, the hybrid rocket has unique advantages such as an inert fuel grain and a relative insensitivity to fuel grain and oxidizer injection anomalies. The advantages mark the hybrid rocket as a potential replacement or alternative for current and future solid propellant booster systems. The issues are addressed and recommendations are made concerning oxidizer feed systems, injectors, and ignition systems as related to hybrid rocket propulsion. Early in the program a baseline hybrid configuration was established in which liquid oxygen would be injected through ports in a solid fuel whose composition is based on hydroxyl terminated polybutadiene (HTPB). Liquid oxygen remained the recommended oxidizer and thus all of the injector concepts which were evaluated assumed only liquid would be used as the oxidizer.

Current issues and areas for improvement in the Korean Dental Hygienist National Licensing Examination: an expert Delphi survey among dental hygienists

PubMed Central

2017-01-01

Purpose This study aimed to investigate current issues and areas for improvement in the Korean Dental Hygienist National Licensing Examination (KDHNLE) through an expert Delphi survey. Methods A Delphi survey was conducted from May through August 2016 in Korea. This Delphi survey included 20 persons representing the field of dental hygiene (7 groups from various dental hygiene-related organizations). The Delphi survey was administered through e-mail as 3 rounds of questionnaire surveys regarding the issues facing the KDHNLE and potential solutions to those challenges. The primary Delphi survey was an open questionnaire. In each round, subjects’ responses were categorized according to the detailed themes of their responses. The minimum value of the content validity ratio of the survey results was determined by the number of panels participating in the Delphi survey. Results Issues facing the KDHNLE were identified from the results of the Delphi survey. The following 4 items had an average importance score of 4.0 or higher and were considered as important by over 85% of the panels: the failure of the practical test to reflect actual clinical settings, the focus of the practical test on dental scaling, the gap between the items evaluated on the national examination and actual practical work, and insufficiency in strengthening the expertise of licensed dental hygienists. The following items were suggested for improvement: more rigorous rater training, adjustment of the difficulty of the licensing examination, the introduction of a specialized dental hygienist system, and more rigorous refresher training for licensed dental hygienists. Conclusion Based on the above results, the KDHNLE should be improved according to the core competencies of dental hygienists, including on-site clinical practice experience. PMID:28900069

Development of an antibiotic spectrum score based on veterans affairs culture and susceptibility data for the purpose of measuring antibiotic de-escalation: a modified Delphi approach.

PubMed

Madaras-Kelly, Karl; Jones, Makoto; Remington, Richard; Hill, Nicole; Huttner, Benedikt; Samore, Matthew

2014-09-01

Development of a numerical score to measure the microbial spectrum of antibiotic regimens (spectrum score) and method to identify antibiotic de-escalation events based on application of the score. Web-based modified Delphi method. Physician and pharmacist antimicrobial stewards practicing in the United States recruited through infectious diseases-focused listservs. Three Delphi rounds investigated: organisms and antibiotics to include in the spectrum score, operationalization of rules for the score, and de-escalation measurement. A 4-point ordinal scale was used to score antibiotic susceptibility for organism-antibiotic domain pairs. Antibiotic regimen scores, which represented combined activity of antibiotics in a regimen across all organism domains, were used to compare antibiotic spectrum administered early (day 2) and later (day 4) in therapy. Changes in spectrum score were calculated and compared with Delphi participants' judgments on de-escalation with 20 antibiotic regimen vignettes and with non-Delphi steward judgments on de-escalation of 300 pneumonia regimen vignettes. Method sensitivity and specificity to predict expert de-escalation status were calculated. Twenty-four participants completed all Delphi rounds. Expert support for concepts utilized in metric development was identified. For vignettes presented in the Delphi, the sign of change in score correctly classified de-escalation in all vignettes except those involving substitution of oral antibiotics. The sensitivity and specificity of the method to identify de-escalation events as judged by non-Delphi stewards were 86.3% and 96.0%, respectively. Identification of de-escalation events based on an algorithm that measures microbial spectrum of antibiotic regimens generally agreed with steward judgments of de-escalation status.

Current issues and areas for improvement in the Korean Dental Hygienist National Licensing Examination: an expert Delphi survey among dental hygienists.

PubMed

Hwang, Yoon-Sook; Kang, Hyun-Sook; Kim, Soo-Hwa; Moon, Hee-Jung; Lee, Sun-Mi; Jung, Jae-Yeon; Hwang, Su-Jeong; Ha, Jung-Eun

2017-01-01

This study aimed to investigate current issues and areas for improvement in the Korean Dental Hygienist National Licensing Examination (KDHNLE) through an expert Delphi survey. A Delphi survey was conducted from May through August 2016 in Korea. This Delphi survey included 20 persons representing the field of dental hygiene (7 groups from various dental hygiene-related organizations). The Delphi survey was administered through e-mail as 3 rounds of questionnaire surveys regarding the issues facing the KDHNLE and potential solutions to those challenges. The primary Delphi survey was an open questionnaire. In each round, subjects' responses were categorized according to the detailed themes of their responses. The minimum value of the content validity ratio of the survey results was determined by the number of panels participating in the Delphi survey. Issues facing the KDHNLE were identified from the results of the Delphi survey. The following 4 items had an average importance score of 4.0 or higher and were considered as important by over 85% of the panels: the failure of the practical test to reflect actual clinical settings, the focus of the practical test on dental scaling, the gap between the items evaluated on the national examination and actual practical work, and insufficiency in strengthening the expertise of licensed dental hygienists. The following items were suggested for improvement: more rigorous rater training, adjustment of the difficulty of the licensing examination, the introduction of a specialized dental hygienist system, and more rigorous refresher training for licensed dental hygienists. Based on the above results, the KDHNLE should be improved according to the core competencies of dental hygienists, including on-site clinical practice experience.

Solid oxide fuel cells, and air electrode and electrical interconnection materials therefor

DOEpatents

Bates, J. Lambert

1992-01-01

In one aspect of the invention, an air electrode material for a solid oxide fuel cell comprises Y.sub.1-a Q.sub.a MnO.sub.3, where "Q" is selected from the group consisting of Ca and Sr or mixtures thereof and "a" is from 0.1 to 0.8. Preferably, "a" is from 0.4 to 0.7. In another aspect of the invention, an electrical interconnection material for a solid oxide fuel cell comprises Y.sub.1-b Ca.sub.b Cr.sub.1-c Al.sub.c O.sub.3, where "b" is from 0.1 to 0.6 and "c" is from 0 to 9.3. Preferably, "b" is from 0.3 to 0.5 and "c" is from 0.05 to 0.1. A composite solid oxide electrochemical fuel cell incorporating these materials comprises: a solid oxide air electrode and an adjacent solid oxide electrical interconnection which commonly include the cation Y, the air electrode comprising Y.sub.1-a Q.sub.a MnO.sub.3, where "Q" is selected from the group consisting of Ca and Sr or mixtures thereof and "a" is from 0.1 to 0.8, the electrical interconnection comprising Y.sub.1-b Ca.sub.b Cr.sub.1-c Al.sub.c O.sub.3, where "b" is from 0.1 to 0.6 and "c" is from 0.0 to 0.3; a yttrium stabilized solid electrolyte comprising (1-d)ZrO.sub.2 -(d)Y.sub.2 O.sub.3 where "d" is from 0.06 to 0.5; and a solid fuel electrode comprising X-ZrO.sub.2, where "X" is an elemental metal.

Solid oxide fuel cells, and air electrode and electrical interconnection materials therefor

DOEpatents

Bates, J.L.

1992-09-01

In one aspect of the invention, an air electrode material for a solid oxide fuel cell comprises Y[sub 1[minus]a]Q[sub a]MnO[sub 3], where Q is selected from the group consisting of Ca and Sr or mixtures thereof and a' is from 0.1 to 0.8. Preferably, a' is from 0.4 to 0.7. In another aspect of the invention, an electrical interconnection material for a solid oxide fuel cell comprises Y[sub 1[minus]b]Ca[sub b]Cr[sub 1[minus]c]Al[sub c]O[sub 3], where b' is from 0.1 to 0.6 and c' is from 0 to 9.3. Preferably, b' is from 0.3 to 0.5 and c' is from 0.05 to 0.1. A composite solid oxide electrochemical fuel cell incorporating these materials comprises: a solid oxide air electrode and an adjacent solid oxide electrical interconnection which commonly include the cation Y, the air electrode comprising Y[sub 1[minus]a]Q[sub a]MnO[sub 3], where Q is selected from the group consisting of Ca and Sr or mixtures thereof and a' is from 0.1 to 0.8, the electrical interconnection comprising Y[sub 1[minus]b]Ca[sub b]Cr[sub 1[minus]c]Al[sub c]O[sub 3], where b' is from 0.1 to 0.6 and c' is from 0.0 to 0.3; a yttrium stabilized solid electrolyte comprising (1[minus]d)ZrO[sub 2]-(d)Y[sub 2]O[sub 3] where d' is from 0.06 to 0.5; and a solid fuel electrode comprising X-ZrO[sub 2], where X' is an elemental metal. 5 figs.

Magnetic graphene oxide modified by imidazole-based ionic liquids for the magnetic-based solid-phase extraction of polysaccharides from brown alga.

PubMed

Wang, Xiaoqin; Li, Guizhen; Row, Kyung Ho

2017-08-01

Magnetic graphene oxide was modified by four imidazole-based ionic liquids to synthesize materials for the extraction of polysaccharides by magnetic solid-phase extraction. Fucoidan and laminarin were chosen as the representative polysaccharides owing to their excellent pharmaceutical value and availability. Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, and thermogravimetric analysis were applied to characterize the synthesized materials. Single-factor experiments showed that the extraction efficiency of polysaccharides was affected by the amount of ionic liquids for modification, solid-liquid ratio of brown alga and ethanol, the stirring time of brown alga and ionic liquid-modified magnetic graphene oxide materials, and amount of 1-(3-aminopropyl)imidazole chloride modified magnetic graphene oxide materials added to the brown alga sample solution. The results indicated that 1-(3-aminopropyl)imidazole chloride modified magnetic graphene oxide possessed better extraction ability than graphene oxide, magnetic graphene oxide, and other three ionic-liquid-modified magnetic graphene oxide materials. The highest extraction recoveries of fucoidan and laminarin extracted by 1-(3-aminopropyl)imidazole chloride modified magnetic graphene oxide were 93.3 and 87.2%, respectively. In addition, solid materials could be separated and reused easily owing to their magnetic properties. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Process for removing copper in a recoverable form from solid scrap metal

DOEpatents

Hartman, Alan D.; Oden, Laurance L.; White, Jack C.

1995-01-01

A process for removing copper in a recoverable form from a copper/solid ferrous scrap metal mix is disclosed. The process begins by placing a copper/solid ferrous scrap metal mix into a reactor vessel. The atmosphere within the reactor vessel is purged with an inert gas or oxidizing while the reactor vessel is heated in the area of the copper/solid ferrous scrap metal mix to raise the temperature within the reactor vessel to a selected elevated temperature. Air is introduced into the reactor vessel and thereafter hydrogen chloride is introduced into the reactor vessel to obtain a desired air-hydrogen chloride mix. The air-hydrogen chloride mix is operable to form an oxidizing and chloridizing atmosphere which provides a protective oxide coating on the surface of the solid ferrous scrap metal in the mix and simultaneously oxidizes/chloridizes the copper in the mix to convert the copper to a copper monochloride gas for transport away from the solid ferrous scrap metal. After the copper is completely removed from the copper/solid ferrous scrap metal mix, the flows of air and hydrogen chloride are stopped and the copper monochloride gas is collected for conversion to a recoverable copper species.

Reducing Energy Cost and Greenhouse Gas Emission in the Corporate Sector, a Delphi Study

ERIC Educational Resources Information Center

Kramer, Maxim L.

2013-01-01

The study is titled "Reducing energy cost and GreenHouse Gas emission in the corporate sector, A Delphi Study". The study applied the Delphi methodology and focused on the Green IT solutions that can help the modern corporate organizations with less than 1000 employees to decrease their energy costs and GHG emissions. The study presents…

Projecting Agricultural Education Programs for the 21st Century Using a Modified Delphi Technique.

ERIC Educational Resources Information Center

Iverson, Maynard J.

A modified three-step Delphi procedure was used to conduct a series of national studies of futurists regarded by their peers as top experts in agricultural education. The primary objective was to project enrollments in agricultural education programs for the 21st century. Other study objectives were to ascertain whether the Delphi technique could…

Examining the Roles of Blended Learning Approaches in Computer-Supported Collaborative Learning (CSCL) Environments: A Delphi Study

ERIC Educational Resources Information Center

So, Hyo-Jeong; Bonk, Curtis J.

2010-01-01

In this study, a Delphi method was used to identify and predict the roles of blended learning approaches in computer-supported collaborative learning (CSCL) environments. The Delphi panel consisted of experts in online learning from different geographic regions of the world. This study discusses findings related to (a) pros and cons of blended…

Fabrication of copper-based anodes via atmosphoric plasma spraying techniques

DOEpatents

Lu, Chun [Monroeville, PA

2012-04-24

A fuel electrode anode (18) for a solid oxide fuel cell is made by presenting a solid oxide fuel cell having an electrolyte surface (15), mixing copper powder with solid oxide electrolyte in a mixing step (24, 44) to provide a spray feedstock (30,50) which is fed into a plasma jet (32, 52) of a plasma torch to melt the spray feed stock and propel it onto an electrolyte surface (34, 54) where the spray feed stock flattens into lamellae layer upon solidification, where the layer (38, 59) is an anode coating with greater than 35 vol. % based on solids volume.

Method of burning sulfur-containing fuels in a fluidized bed boiler

DOEpatents

Jones, Brian C.

1982-01-01

A method of burning a sulfur-containing fuel in a fluidized bed of sulfur oxide sorbent wherein the overall utilization of sulfur oxide sorbent is increased by comminuting the bed drain solids to a smaller average particle size, preferably on the order of 50 microns, and reinjecting the comminuted bed drain solids into the bed. In comminuting the bed drain solids, particles of spent sulfur sorbent contained therein are fractured thereby exposing unreacted sorbent surface. Upon reinjecting the comminuted bed drain solids into the bed, the newly-exposed unreacted sorbent surface is available for sulfur oxide sorption, thereby increasing overall sorbent utilization.

Calorimetric determination of energetics of solid solutions of UO 2+ x with CaO and Y 2O 3

NASA Astrophysics Data System (ADS)

Mazeina, Lena; Navrotsky, Alexandra; Greenblatt, Martha

2008-02-01

Quantitative study of thermodynamic properties of solid solutions of UO 2+ x with divalent and trivalent oxides is important for predicting the behavior of oxide fuel. Although early literature work measured vapor pressure in some of these solid solutions, direct calorimetric measurements of enthalpies of formation have been hampered by the refractory nature of such oxides. First measurements of the enthalpies of formation in the systems UO 2+ x-CaO and UO 2+ x-YO 1.5, obtained by high-temperature oxide melt solution calorimetry, are reported. Both systems show significantly negative (exothermic) heats of formation from binary oxides (UO 2, plus O 2 and CaO or YO 1.5, as well as from UO 2 plus UO 3 and CaO or YO 1.5), consistent with reported free energy measurements in the urania-yttria system. The energetic contributions of oxygen content (oxidation of U 4+) and of charge balanced ionic substitution as well as defect clustering are discussed. Behavior of urania-yttria is compared to that of corresponding systems in which the tetravalent ion is Ce, Zr, or Hf. The substantial additional stability in the solid solutions compared to pure UO 2+ x may retard, in both thermodynamic and kinetic sense, the oxidation and leaching of spent fuel to form aqueous U 6+ and solid uranyl phases.

Methods and systems for producing syngas

DOEpatents

Hawkes, Grant L; O& #x27; Brien, James E; Stoots, Carl M; Herring, J. Stephen; McKellar, Michael G; Wood, Richard A; Carrington, Robert A; Boardman, Richard D

2013-02-05

Methods and systems are provided for producing syngas utilizing heat from thermochemical conversion of a carbonaceous fuel to support decomposition of at least one of water and carbon dioxide using one or more solid-oxide electrolysis cells. Simultaneous decomposition of carbon dioxide and water or steam by one or more solid-oxide electrolysis cells may be employed to produce hydrogen and carbon monoxide. A portion of oxygen produced from at least one of water and carbon dioxide using one or more solid-oxide electrolysis cells is fed at a controlled flow rate in a gasifier or combustor to oxidize the carbonaceous fuel to control the carbon dioxide to carbon monoxide ratio produced.

High temperature resistant cermet and ceramic compositions

NASA Technical Reports Server (NTRS)

Phillips, W. M. (Inventor)

1978-01-01

Cermet compositions having high temperature oxidation resistance, high hardness and high abrasion and wear resistance, and particularly adapted for production of high temperature resistant cermet insulator bodies are presented. The compositions are comprised of a sintered body of particles of a high temperature resistant metal or metal alloy, preferably molybdenum or tungsten particles, dispersed in and bonded to a solid solution formed of aluminum oxide and silicon nitride, and particularly a ternary solid solution formed of a mixture of aluminum oxide, silicon nitride and aluminum nitride. Also disclosed are novel ceramic compositions comprising a sintered solid solution of aluminum oxide, silicon nitride and aluminum nitride.

Solid-to-solid oxidation of a vanadium(IV) to a vanadium(V) compound: chemisty of a sulfur-containing siderophore.

PubMed

Chatterjee, Pabitra B; Crans, Debbie C

2012-09-03

Visible light facilitates a solid-to-solid photochemical aerobic oxidation of a hunter-green microcrystalline oxidovanadium(IV) compound (1) to form a black powder of cis-dioxidovanadium(V) (2) at ambient temperature. The siderophore ligand pyridine-2,6-bis(thiocarboxylic acid), H(2)L, is secreted by a microorganism from the Pseudomonas genus. This irreversible transformation of a metal monooxo to a metal dioxo complex in the solid state in the absence of solvent is unprecedented. It serves as a proof-of-concept reaction for green chemistry occurring in solid matrixes.

Combinatorial synthesis of phosphors using arc-imaging furnace

PubMed Central

Ishigaki, Tadashi; Toda, Kenji; Yoshimura, Masahiro; Uematsu, Kazuyoshi; Sato, Mineo

2011-01-01

We have applied a novel ‘melt synthesis technique’ rather than a conventional solid-state reaction to rapidly synthesize phosphor materials. During a synthesis, the mixture of oxides or their precursors is melted by light pulses (10–60 s) in an arc-imaging furnace on a water-cooled copper hearth to form a globule of 1–5 mm diameter, which is then rapidly cooled by turning off the light. Using this method, we synthesized several phosphor compounds including Y3Al5O12:Ce(YAG) and SrAl2O4:Eu,Dy. Complex phosphor oxides are difficult to produce by conventional solid-state reaction techniques because of the slow reaction rates among solid oxides; as a result, the oxides form homogeneous compounds or solid solutions. On the other hand, melt reactions are very fast (10–60 s) and result in homogeneous compounds owing to rapid diffusion and mixing in the liquid phase. Therefore, melt synthesis techniques are suitable for preparing multi component homogeneous compounds and solid solutions. PMID:27877432

Combinatorial synthesis of phosphors using arc-imaging furnace

NASA Astrophysics Data System (ADS)

Ishigaki, Tadashi; Toda, Kenji; Yoshimura, Masahiro; Uematsu, Kazuyoshi; Sato, Mineo

2011-10-01

We have applied a novel 'melt synthesis technique' rather than a conventional solid-state reaction to rapidly synthesize phosphor materials. During a synthesis, the mixture of oxides or their precursors is melted by light pulses (10-60 s) in an arc-imaging furnace on a water-cooled copper hearth to form a globule of 1-5 mm diameter, which is then rapidly cooled by turning off the light. Using this method, we synthesized several phosphor compounds including Y3Al5O12:Ce(YAG) and SrAl2O4:Eu,Dy. Complex phosphor oxides are difficult to produce by conventional solid-state reaction techniques because of the slow reaction rates among solid oxides; as a result, the oxides form homogeneous compounds or solid solutions. On the other hand, melt reactions are very fast (10-60 s) and result in homogeneous compounds owing to rapid diffusion and mixing in the liquid phase. Therefore, melt synthesis techniques are suitable for preparing multi component homogeneous compounds and solid solutions.

Low temperature ozone oxidation of solid waste surrogates

NASA Astrophysics Data System (ADS)

Nabity, James A.; Lee, Jeffrey M.

2015-09-01

Solid waste management presents a significant challenge to human spaceflight and especially, long-term missions beyond Earth orbit. A six-month mission will generate over 300 kg of solid wastes per crewmember that must be dealt with to eliminate the need for storage and prevent it from becoming a biological hazard to the crew. There are several methods for the treatment of wastes that include oxidation via ozone, incineration, microbial oxidation or pyrolysis and physical methods such as microwave drying and compaction. In recent years, a low temperature oxidation process using ozonated water has been developed for the chemical conversion of organic wastes to CO2 and H2O. Experiments were conducted to evaluate the rate and effectiveness with which ozone oxidized several different waste materials. Increasing the surface area by chopping or shredding the solids into small pieces more than doubled the rate of oxidation. A greater flow of ozone and agitation of the ozonated water system also increased processing rates. Of the materials investigated, plastics have proven the most difficult to oxidize. The processing of plastics above the glass transition temperatures caused the plastics to clump together which reduced the exposed surface area, while processing at lower temperatures reduced surface reaction kinetics.

Concepts and Contexts in Engineering and Technology Education: An International and Interdisciplinary Delphi Study

ERIC Educational Resources Information Center

Rossouw, Ammeret; Hacker, Michael; de Vries, Marc J.

2011-01-01

Inspired by a similar study by Osborne et al. we have conducted a Delphi study among experts to identify key concepts to be taught in engineering and technology education and relevant and meaningful contexts through which these concepts can be taught and learnt. By submitting the outcomes of the Delphi study to a panel of experts in a two-day…

Supercritical water oxidation - Microgravity solids separation

NASA Technical Reports Server (NTRS)

Killilea, William R.; Hong, Glenn T.; Swallow, Kathleen C.; Thomason, Terry B.

1988-01-01

This paper discusses the application of supercritical water oxidation (SCWO) waste treatment and water recycling technology to the problem of waste disposal in-long term manned space missions. As inorganic constituents present in the waste are not soluble in supercritical water, they must be removed from the organic-free supercritical fluid reactor effluent. Supercritical water reactor/solids separator designs capable of removing precipitated solids from the process' supercritical fluid in zero- and low- gravity environments are developed and evaluated. Preliminary experiments are then conducted to test the concepts. Feed materials for the experiments are urine, feces, and wipes with the addition of reverse osmosis brine, the rejected portion of processed hygiene water. The solid properties and their influence on the design of several oxidation-reactor/solids-separator configurations under study are presented.

Academic Primer Series: Key Papers About Competency-Based Medical Education

PubMed Central

Cooney, Robert; Chan, Teresa M.; Gottlieb, Michael; Abraham, Michael; Alden, Sylvia; Mongelluzzo, Jillian; Pasirstein, Michael; Sherbino, Jonathan

2017-01-01

Introduction Competency-based medical education (CBME) presents a paradigm shift in medical training. This outcome-based education movement has triggered substantive changes across the globe. Since this transition is only beginning, many faculty members may not have experience with CBME nor a solid foundation in the grounding literature. We identify and summarize key papers to help faculty members learn more about CBME. Methods Based on the online discussions of the 2016–2017 ALiEM Faculty Incubator program, a series of papers on the topic of CBME was developed. Augmenting this list with suggestions by a guest expert and by an open call on Twitter for other important papers, we were able to generate a list of 21 papers in total. Subsequently, we used a modified Delphi study methodology to narrow the list to key papers that describe the importance and significance for educators interested in learning about CBME. To determine the most impactful papers, the mixed junior and senior faculty authorship group used three-round voting methodology based upon the Delphi method. Results Summaries of the five most highly rated papers on the topic of CBME, as determined by this modified Delphi approach, are presented in this paper. Major themes include a definition of core CBME themes, CBME principles to consider in the design of curricula, a history of the development of the CBME movement, and a rationale for changes to accreditation with CBME. The application of the study findings to junior faculty and faculty developers is discussed. Conclusion We present five key papers on CBME that junior faculty members and faculty experts identified as essential to faculty development. These papers are a mix of foundational and explanatory papers that may provide a basis from which junior faculty members may build upon as they help to implement CBME programs. PMID:28611893

Low voltage solid-state lateral coloration electrochromic device

DOEpatents

Tracy, C.E.; Benson, D.K.; Ruth, M.R.

1984-12-21

A solid-state transition metal oxide device comprising a plurality of layers having a predisposed orientation including an electrochromic oxide layer. Conductive material including anode and cathode contacts is secured to the device. Coloration is actuated within the electrochromic oxide layer after the application of a predetermined potential between the contacts. The coloration action is adapted to sweep or dynamically extend across the length of the electrochromic oxide layer.

Low voltage solid-state lateral coloration electrochromic device

DOEpatents

Tracy, C. Edwin; Benson, David K.; Ruth, Marta R.

1987-01-01

A solid-state transition metal oxide device comprising a plurality of lay having a predisposed orientation including an electrochromic oxide layer. Conductive material including anode and cathode contacts is secured to the device. Coloration is actuated within the electrochromic oxide layer after the application of a predetermined potential between the contacts. The coloration action is adapted to sweep or dynamically extend across the length of the electrochromic oxide layer.

Actinide recovery process

DOEpatents

Muscatello, Anthony C.; Navratil, James D.; Saba, Mark T.

1987-07-28

Process for the removal of plutonium polymer and ionic actinides from aqueous solutions by absorption onto a solid extractant loaded on a solid inert support such as polystyrenedivinylbenzene. The absorbed actinides can then be recovered by incineration, by stripping with organic solvents, or by acid digestion. Preferred solid extractants are trioctylphosphine oxide and octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and the like.

Actinide recovery process

DOEpatents

Muscatello, A.C.; Navratil, J.D.; Saba, M.T.

1985-06-13

Process for the removal of plutonium polymer and ionic actinides from aqueous solutions by absorption onto a solid extractant loaded on a solid inert support such as polystyrene-divinylbenzene. The absorbed actinides can then be recovered by incineration, by stripping with organic solvents, or by acid digestion. Preferred solid extractants are trioctylphosphine oxide and octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and the like. 2 tabs.

Glass/BNNT Composite for Sealing Solid Oxide Fuel Cells

NASA Technical Reports Server (NTRS)

Bansal, Narottam P.; Hurst, Janet B.; Choi, Sung R.

2007-01-01

A material consisting of a barium calcium aluminosilicate glass reinforced with 4 weight percent of boron nitride nanotubes (BNNTs) has shown promise for use as a sealant in planar solid oxide fuel cells (SOFCs).

EPICO 3.0. Antifungal prophylaxis in solid organ transplant recipients.

PubMed

Zaragoza, Rafael; Aguado, José María; Ferrer, Ricard; Rodríguez, Alejandro H; Maseda, Emilio; Llinares, Pedro; Grau, Santiago; Muñoz, Patricia; Fortún, Jesús; Bouzada, Mercedes; Pozo, Juan Carlos Del; León, Rafael

Although over the past decade the management of invasive fungal infection has improved, considerable controversy persists regarding antifungal prophylaxis in solid organ transplant recipients. To identify the key clinical knowledge and make by consensus the high level recommendations required for antifungal prophylaxis in solid organ transplant recipients. Spanish prospective questionnaire, which measures consensus through the Delphi technique, was conducted anonymously and by e-mail with 30 national multidisciplinary experts, specialists in invasive fungal infections from six national scientific societies, including intensivists, anesthetists, microbiologists, pharmacologists and specialists in infectious diseases that responded to 12 questions prepared by the coordination group, after an exhaustive review of the literature in the last few years. The level of agreement achieved among experts in each of the categories should be equal to or greater than 70% in order to make a clinical recommendation. In a second term, after extracting the recommendations of the selected topics, a face-to-face meeting was held with more than 60 specialists who were asked to validate the pre-selected recommendations and derived algorithm. Echinocandin antifungal prophylaxis should be considered in liver transplant with major risk factors (retransplantation, renal failure requiring dialysis after transplantation, pretransplant liver failure, not early reoperation, or MELD>30); heart transplant with hemodialysis, and surgical re-exploration after transplantation; environmental colonization by Aspergillus, or cytomegalovirus (CMV) infection; and pancreas and intestinal transplant in case of acute graft rejection, hemodialysis, initial graft dysfunction, post-perfusion pancreatitis with anastomotic problems or need for laparotomy after transplantation. Antifungal fluconazole prophylaxis should be considered in liver transplant without major risk factors and MELD 20-30, split or living donor, choledochojejunostomy, increased transfusion requirements, renal failure without replacement therapy, early reoperation, or multifocal colonization or infection with Candida; intestinal and pancreas transplant with no risk factors for echinocandin treatment. Liposomal amphotericin B antifungal prophylaxis should be considered in lung transplant (inhalant form) and liver transplant with major risk factors. Antifungal prophylaxis with voriconazole should be considered in lung transplant, and heart transplant with hemodialysis, surgical re-exploration after transplantation, environmental colonization by Aspergillus, or CMV infection. The management of antifungal prophylaxis in solid organ transplant recipients requires the application of knowledge and skills that are detailed in our recommendations and the algorithm developed therein. These recommendations, based on the DELPHI methodology, may help to identify potential patients, standardize their management and improve overall prognosis. Copyright © 2016 Asociación Española de Micología. Publicado por Elsevier España, S.L.U. All rights reserved.

Solid oxide fuel cell with transitioned cross-section for improved anode gas management at the open end

DOEpatents

Zafred, Paolo R [Murrysville, PA; Draper, Robert [Pittsburgh, PA

2012-01-17

A solid oxide fuel cell (400) is made having a tubular, elongated, hollow, active section (445) which has a cross-section containing an air electrode (452) a fuel electrode (454) and solid oxide electrolyte (456) between them, where the fuel cell transitions into at least one inactive section (460) with a flattened parallel sided cross-section (462, 468) each cross-section having channels (472, 474, 476) in them which smoothly communicate with each other at an interface section (458).

Simple Electrolyzer Model Development for High-Temperature Electrolysis System Analysis Using Solid Oxide Electrolysis Cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

JaeHwa Koh; DuckJoo Yoon; Chang H. Oh

2010-07-01

An electrolyzer model for the analysis of a hydrogen-production system using a solid oxide electrolysis cell (SOEC) has been developed, and the effects for principal parameters have been estimated by sensitivity studies based on the developed model. The main parameters considered are current density, area specific resistance, temperature, pressure, and molar fraction and flow rates in the inlet and outlet. Finally, a simple model for a high-temperature hydrogen-production system using the solid oxide electrolysis cell integrated with very high temperature reactors is estimated.

A Research Study Using the Delphi Method to Define Essential Competencies for a High School Game Art and Design Course Framework at the National Level

ERIC Educational Resources Information Center

Mack, Nayo Corenus-Geneva

2011-01-01

This research study reports the findings of a Delphi study conducted to determine the essential competencies and objectives for a high school Game Art and Design course framework at the national level. The Delphi panel consisted of gaming, industry and educational experts from all over the world who were members of the International Game…

Using the Internet to Improve HRD Research: The Case of the Web-Based Delphi Research Technique to Achieve Content Validity of an HRD-Oriented Measurement

ERIC Educational Resources Information Center

Hatcher, Tim; Colton, Sharon

2007-01-01

Purpose: The purpose of this article is to highlight the results of the online Delphi research project; in particular the procedures used to establish an online and innovative process of content validation and obtaining "rich" and descriptive information using the internet and current e-learning technologies. The online Delphi was proven to be an…

Using a Delphi process to establish consensus on emergency medicine clerkship competencies.

PubMed

Penciner, Rick; Langhan, Trevor; Lee, Richard; McEwen, Jill; Woods, Robert A; Bandiera, Glen

2011-01-01

Currently, there is no consensus on the core competencies required for emergency medicine (EM) clerkships in Canada. Existing EM curricula have been developed through informal consensus or local efforts. The Delphi process has been used extensively as a means for establishing consensus. The purpose of this project was to define core competencies for EM clerkships in Canada, to validate a Delphi process in the context of national curriculum development, and to demonstrate the adoption of the CanMEDS physician competency paradigm in the undergraduate medical education realm. Using a modified Delphi process, we developed a consensus amongst a panel of expert emergency physicians from across Canada utilizing the CanMEDS 2005 Physician Competency Framework. Thirty experts from nine different medical schools across Canada participated on the panel. The initial list consisted of 152 competencies organized in the seven domains of the CanMEDS 2005 Physician Competency Framework. After the second round of the Delphi process, the list of competencies was reduced to 62 (59% reduction). This study demonstrated that a modified Delphi process can result in a strong consensus around a realistic number of core competencies for EM clerkships. We propose that such a method could be used by other medical specialties and health professions to develop rotation-specific core competencies.

Application of Delphi expert panel in joint venture projects

NASA Astrophysics Data System (ADS)

Adnan, H.; Rosman, M. R.; Rashid, Z. Z. Ahmad; Mohamad Yusuwan, N.; Bakhary, N. A.

2018-02-01

This study was conducted with the aim to identify the application of the Delphi Technique in validating findings obtained from questionnaire surveys and interviews done in- depth on the subject of joint venture projects in Malaysia. The Delphi technique aims to achieve a consensus of opinion amongst expert panellist that were selected on the primary factors in JV projects. To achieve research objectives, a progressive series of questions was designed where a selected panel of expert to confirm and validate the final findings. The rationale, benefits, limitations and recommendations for the use of Delphi were given in this study. From the literature review done, twenty-one factors were identified as critical factors to the making any joint venture project successful. Detail information from contractors were obtained by using the questionnaire survey method and forty-three in-depth interviews were carried out. Trust between partners, mutual understanding, partner selection criteria, agreement of contract, objective compatibility, conflict, and commitment were confirmed by the Delphi panel to be the critical success factors besides another fourteen factors which were found to be the Failure Reduction Criteria. Delphi techniques has proven to successfully assist in recognising the main factors and would be beneficial in supplementing the success of joint venture arrangements application for construction projects in Malaysia.

Protective interlayer for high temperature solid electrolyte electrochemical cells

DOEpatents

Singh, P.; Vasilow, T.R.; Richards, V.L.

1996-05-14

The invention is comprised of an electrically conducting doped or admixed cerium oxide composition with niobium oxide and/or tantalum oxide for electrochemical devices, characterized by the general formula: Nb{sub x}Ta{sub y}Ce{sub 1{minus}x{minus}y}O{sub 2} where x is about 0.0 to 0.05, y is about 0.0 to 0.05, and x+y is about 0.02 to 0.05, and where x is preferably about 0.02 to 0.05 and y is 0, and a method of making the same is also described. This novel composition is particularly applicable in forming a protective interlayer of a high temperature, solid electrolyte electrochemical cell, characterized by a first electrode; an electrically conductive interlayer of niobium and/or tantalum doped cerium oxide deposited over at least a first portion of the first electrode; an interconnect deposited over the interlayer; a solid electrolyte deposited over a second portion of the first electrode, the first portion being discontinuous from the second portion; and, a second electrode deposited over the solid electrolyte. The interlayer is characterized as being porous and selected from the group consisting of niobium doped cerium oxide, tantalum doped cerium oxide, and niobium and tantalum doped cerium oxide or admixtures of the same. The first electrode, an air electrode, is a porous layer of doped lanthanum manganite, the solid electrolyte layer is a dense yttria stabilized zirconium oxide, the interconnect layer is a dense, doped lanthanum chromite, and the second electrode, a fuel electrode, is a porous layer of nickel-zirconium oxide cermet. The electrochemical cell can take on a plurality of shapes such as annular, planar, etc. and can be connected to a plurality of electrochemical cells in series and/or in parallel to generate electrical energy. 5 figs.

Methods for using novel cathode and electrolyte materials for solid oxide fuel cells and ion transport membranes

DOEpatents

Jacobson, Allan J.; Wang, Shuangyan; Kim, Gun Tae

2016-01-12

Methods using novel cathode, electrolyte and oxygen separation materials operating at intermediate temperatures for use in solid oxide fuel cells and ion transport membranes include oxides with perovskite related structures and an ordered arrangement of A site cations. The materials have significantly faster oxygen kinetics than in corresponding disordered perovskites.

Cathode and electrolyte materials for solid oxide fuel cells and ion transport membranes

DOEpatents

Jacobson, Allan J; Wang, Shuangyan; Kim, Gun Tae

2014-01-28

Novel cathode, electrolyte and oxygen separation materials are disclosed that operate at intermediate temperatures for use in solid oxide fuel cells and ion transport membranes based on oxides with perovskite related structures and an ordered arrangement of A site cations. The materials have significantly faster oxygen kinetics than in corresponding disordered perovskites.

The electrochemical reduction processes of solid compounds in high temperature molten salts.

PubMed

Xiao, Wei; Wang, Dihua

2014-05-21

Solid electrode processes fall in the central focus of electrochemistry due to their broad-based applications in electrochemical energy storage/conversion devices, sensors and electrochemical preparation. The electrolytic production of metals, alloys, semiconductors and oxides via the electrochemical reduction of solid compounds (especially solid oxides) in high temperature molten salts has been well demonstrated to be an effective and environmentally friendly process for refractory metal extraction, functional materials preparation as well as spent fuel reprocessing. The (electro)chemical reduction of solid compounds under cathodic polarizations generally accompanies a variety of changes at the cathode/melt electrochemical interface which result in diverse electrolytic products with different compositions, morphologies and microstructures. This report summarizes various (electro)chemical reactions taking place at the compound cathode/melt interface during the electrochemical reduction of solid compounds in molten salts, which mainly include: (1) the direct electro-deoxidation of solid oxides; (2) the deposition of the active metal together with the electrochemical reduction of solid oxides; (3) the electro-inclusion of cations from molten salts; (4) the dissolution-electrodeposition process, and (5) the electron hopping process and carbon deposition with the utilization of carbon-based anodes. The implications of the forenamed cathodic reactions on the energy efficiency, chemical compositions and microstructures of the electrolytic products are also discussed. We hope that a comprehensive understanding of the cathodic processes during the electrochemical reduction of solid compounds in molten salts could form a basis for developing a clean, energy efficient and affordable production process for advanced/engineering materials.

Designing a Standardized Laparoscopy Curriculum for Gynecology Residents: A Delphi Approach

PubMed Central

Shore, Eliane M.; Lefebvre, Guylaine G.; Husslein, Heinrich; Bjerrum, Flemming; Sorensen, Jette Led; Grantcharov, Teodor P.

2015-01-01

Background Evidence suggests that simulation leads to improved operative skill, shorter operating room time, and better patient outcomes. Currently, no standardized laparoscopy curriculum exists for gynecology residents. Objective To design a structured laparoscopy curriculum for gynecology residents using Delphi consensus methodology. Methods This study began with Delphi methodology to determine expert consensus on the components of a gynecology laparoscopic skills curriculum. We generated a list of cognitive content, technical skills, and nontechnical skills for training in laparoscopic surgery, and asked 39 experts in gynecologic education to rate the items on a Likert scale (1–5) for inclusion in the curriculum. Consensus was predefined as Cronbach α of ≥ 0.80. We then conducted another Delphi survey with 9 experienced users of laparoscopic virtual reality simulators to delineate relevant curricular tasks. Finally, a cross-sectional design defined benchmark scores for all identified tasks, with 10 experienced gynecologic surgeons performing the identified tasks at basic, intermediate, and advanced levels. Results Consensus (Cronbach α = 0.85) was achieved in the first round of the curriculum Delphi, and after 2 rounds (Cronbach α = 0.80) in the virtual reality curriculum Delphi. Consensus was reached for cognitive, technical, and nontechnical skills as well as for 6 virtual reality tasks. Median time and economy of movement scores defined benchmarks for all tasks. Conclusions This study used Delphi consensus to develop a comprehensive curriculum for teaching gynecologic laparoscopy. The curriculum conforms to current educational standards of proficiency-based training, and is suggested as a standard in residency programs. PMID:26221434

Seeking an oracle: using the Delphi process to develop practice guidelines for the treatment of endometriosis with Chinese herbal medicine.

PubMed

Flower, Andrew; Lewith, George T; Little, Paul

2007-11-01

For most complementary and alternative medicine interventions, the absence of a high-quality evidence base to define good practice presents a serious problem for clinicians, educators, and researchers. The Delphi process may offer a pragmatic way to establish good practice guidelines until more rigorous forms of assessment can be undertaken. To use a modified Delphi to develop good practice guidelines for a feasibility study exploring the role of Chinese herbal medicine (CHM) in the treatment of endometriosis. To compare the outcomes from Delphi with data derived from a systematic review of the Chinese language database. An expert group was convened for a three-round Delphi that initially produced key statements relating to the CHM diagnosis and treatment of endometriosis (round 1) and then anonymously rated these on a 1-7 Likert scale (rounds 2 and 3). Statements with a median score of 5 and above were regarded as demonstrating positive group consensus. The differential diagnoses within Chinese Medicine and rating of the clinical value of individual herbs were then contrasted with comparable data from a review of Chinese language reports in the Chinese Biomedical Retrieval System (1978-2002), and China Academy of Traditional Chinese Medicine (1985-2002) databases and the Chinese TCM and magazine literature (1984-2004) databases. Consensus (good practice) guidelines for the CHM treatment of endometriosis relating to common diagnostic patterns, herb selection, dosage, and patient management were produced. The Delphi guidelines demonstrated a high degree of congruence with the information from the Chinese language databases. In the absence of rigorous evidence, Delphi offers a way to synthesize expert knowledge relating to diagnosis, patient management, and herbal selection in the treatment of endometriosis. The limitations of the expert group and the inability of Delphi to capture the subtle nuances of individualized clinical decision-making limit the usefulness of this approach.

What works for wellbeing in culture and sport? Report of a DELPHI process to support coproduction and establish principles and parameters of an evidence review.

PubMed

Daykin, Norma; Mansfield, Louise; Payne, Annette; Kay, Tess; Meads, Catherine; D'Innocenzo, Giorgia; Burnett, Adele; Dolan, Paul; Julier, Guy; Longworth, Louise; Tomlinson, Alan; Testoni, Stefano; Victor, Christina

2017-09-01

There is a growing recognition of the ways in which culture and sport can contribute to wellbeing. A strong evidence base is needed to support innovative service development and a 3-year research programme is being undertaken to capture best evidence of wellbeing impacts and outcomes of cultural and sporting activities in order to inform UK policy and practice. This article provides an overview of methods and findings from an initial coproduction process with key stakeholders that sought to explore and agree principles and parameters of the evidence review for culture, sport and wellbeing (CSW). A two-stage DELPHI process was conducted with a purposeful sample of 57 stakeholders between August and December 2015. Participants were drawn from a range of culture and sport organisations and included commissioners and managers, policy makers, representatives of service delivery organisations (SDOs) and scholars. The DELPHI 1 questionnaire was developed from extensive consultation in July and August 2015. It explored definitions of wellbeing, the role of evidence, quality assessment, and the culture and sport populations, settings and interventions that are most likely to deliver wellbeing outcomes. Following further consultation, the results, presented as a series of ranked statements, were sent back to participants (DELPHI 2), which allowed them to reflect on and, if they wished, express agreement or disagreement with the emerging consensus. A total of 40 stakeholders (70.02%) responded to the DELPHI questionnaires. DELPHI 1 mapped areas of agreement and disagreement, confirmed in DELPHI 2. The exercise drew together the key priorities for the CSW evidence review. The DELPHI process, in combination with face-to-face deliberation, enabled stakeholders to engage in complex discussion and express nuanced priorities while also allowing the group to come to an overall consensus and agree outcomes. The results will inform the CSW evidence review programme until its completion in March 2018.

What works for wellbeing in culture and sport? Report of a DELPHI process to support coproduction and establish principles and parameters of an evidence review

PubMed Central

Daykin, Norma; Mansfield, Louise; Payne, Annette; Kay, Tess; Meads, Catherine; D’Innocenzo, Giorgia; Burnett, Adele; Dolan, Paul; Julier, Guy; Longworth, Louise; Tomlinson, Alan; Testoni, Stefano; Victor, Christina

2016-01-01

Aims: There is a growing recognition of the ways in which culture and sport can contribute to wellbeing. A strong evidence base is needed to support innovative service development and a 3-year research programme is being undertaken to capture best evidence of wellbeing impacts and outcomes of cultural and sporting activities in order to inform UK policy and practice. This article provides an overview of methods and findings from an initial coproduction process with key stakeholders that sought to explore and agree principles and parameters of the evidence review for culture, sport and wellbeing (CSW). Methods: A two-stage DELPHI process was conducted with a purposeful sample of 57 stakeholders between August and December 2015. Participants were drawn from a range of culture and sport organisations and included commissioners and managers, policy makers, representatives of service delivery organisations (SDOs) and scholars. The DELPHI 1 questionnaire was developed from extensive consultation in July and August 2015. It explored definitions of wellbeing, the role of evidence, quality assessment, and the culture and sport populations, settings and interventions that are most likely to deliver wellbeing outcomes. Following further consultation, the results, presented as a series of ranked statements, were sent back to participants (DELPHI 2), which allowed them to reflect on and, if they wished, express agreement or disagreement with the emerging consensus. Results: A total of 40 stakeholders (70.02%) responded to the DELPHI questionnaires. DELPHI 1 mapped areas of agreement and disagreement, confirmed in DELPHI 2. The exercise drew together the key priorities for the CSW evidence review. Conclusion: The DELPHI process, in combination with face-to-face deliberation, enabled stakeholders to engage in complex discussion and express nuanced priorities while also allowing the group to come to an overall consensus and agree outcomes. The results will inform the CSW evidence review programme until its completion in March 2018. PMID:27789779

High temperature resistant cermet and ceramic compositions. [for thermal resistant insulators and refractory coatings

NASA Technical Reports Server (NTRS)

Phillips, W. M. (Inventor)

1978-01-01

High temperature oxidation resistance, high hardness and high abrasion and wear resistance are properties of cermet compositions particularly to provide high temperature resistant refractory coatings on metal substrates, for use as electrical insulation seals for thermionic converters. The compositions comprise a sintered body of particles of a high temperature resistant metal or metal alloy, preferably molybdenum or tungsten particles, dispersed in and bonded to a solid solution formed of aluminum oxide and silicon nitride, and particularly a ternary solid solution formed of a mixture of aluminum oxide, silicon nitride and aluminum nitride. Ceramic compositions comprising a sintered solid solution of aluminum oxide, silicon nitride and aluminum nitride are also described.

Cellulose nanofibril/reduced graphene oxide/carbon nanotube hybrid aerogels for highly flexible and all-solid-state supercapacitors

Treesearch

Qifeng Zheng; Zhiyong Cai; Zhenqiang Ma; Shaoqin Gong

2015-01-01

A novel type of highly flexible and all-solid-state supercapacitor that uses cellulose nanofibril (CNF)/reduced graphene oxide (RGO)/carbon nanotube (CNT) hybrid aerogels as electrodes and H2SO4 poly (vinyl alcohol) PVA gel as the electrolyte was developed and is reported here. These flexible solid-state supercapacitors...

Chemical and thermal stability of core-shelled magnetite nanoparticles and solid silica

NASA Astrophysics Data System (ADS)

Cendrowski, Krzysztof; Sikora, Pawel; Zielinska, Beata; Horszczaruk, Elzbieta; Mijowska, Ewa

2017-06-01

Pristine nanoparticles of magnetite were coated by solid silica shell forming core/shell structure. 20 nm thick silica coating significantly enhanced the chemical and thermal stability of the iron oxide. Chemical and thermal stability of this structure has been compared to the magnetite coated by mesoporous shell and pristine magnetite nanoparticles. It is assumed that six-membered silica rings in a solid silica shell limit the rate of oxygen diffusion during thermal treatment in air and prevent the access of HCl molecules to the core during chemical etching. Therefore, the core/shell structure with a solid shell requires a longer time to induce the oxidation of iron oxide to a higher oxidation state and, basically, even strong concentrated acid such as HCl is not able to dissolve it totally in one month. This leads to the desired performance of the material in potential applications such as catalysis and environmental protection.

Proposal of an environmental performance index to assess solid waste treatment technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goulart Coelho, Hosmanny Mauro, E-mail: hosmanny@hotmail.com; Lange, Lisete Celina; Coelho, Lineker Max Goulart

2012-07-15

Highlights: Black-Right-Pointing-Pointer Proposal of a new concept in waste management: Cleaner Treatment. Black-Right-Pointing-Pointer Development of an index to assess quantitatively waste treatment technologies. Black-Right-Pointing-Pointer Delphi Method was carried out so as to define environmental indicators. Black-Right-Pointing-Pointer Environmental performance evaluation of waste-to-energy plants. - Abstract: Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond wastemore » energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different treatment plants being an excellent quantitative tool to support Cleaner Treatment implementation.« less

Modeling of thermal expansion coefficient of perovskite oxide for solid oxide fuel cell cathode

NASA Astrophysics Data System (ADS)

Heydari, F.; Maghsoudipour, A.; Alizadeh, M.; Khakpour, Z.; Javaheri, M.

2015-09-01

Artificial intelligence models have the capacity to eliminate the need for expensive experimental investigation in various areas of manufacturing processes, including the material science. This study investigates the applicability of adaptive neuro-fuzzy inference system (ANFIS) approach for modeling the performance parameters of thermal expansion coefficient (TEC) of perovskite oxide for solid oxide fuel cell cathode. Oxides (Ln = La, Nd, Sm and M = Fe, Ni, Mn) have been prepared and characterized to study the influence of the different cations on TEC. Experimental results have shown TEC decreases favorably with substitution of Nd3+ and Mn3+ ions in the lattice. Structural parameters of compounds have been determined by X-ray diffraction, and field emission scanning electron microscopy has been used for the morphological study. Comparison results indicated that the ANFIS technique could be employed successfully in modeling thermal expansion coefficient of perovskite oxide for solid oxide fuel cell cathode, and considerable savings in terms of cost and time could be obtained by using ANFIS technique.

Thin-Film Solid Oxide Fuel Cells

NASA Technical Reports Server (NTRS)

Chen, Xin; Wu, Nai-Juan; Ignatiev, Alex

2009-01-01

The development of thin-film solid oxide fuel cells (TFSOFCs) and a method of fabricating them have progressed to the prototype stage. This can result in the reduction of mass, volume, and the cost of materials for a given power level.

Removal of sulfur and nitrogen containing pollutants from discharge gases

DOEpatents

Joubert, James I.

1986-01-01

Oxides of sulfur and of nitrogen are removed from waste gases by reaction with an unsupported copper oxide powder to form copper sulfate. The resulting copper sulfate is dissolved in water to effect separation from insoluble mineral ash and dried to form solid copper sulfate pentahydrate. This solid sulfate is thermally decomposed to finely divided copper oxide powder with high specific surface area. The copper oxide powder is recycled into contact with the waste gases requiring cleanup. A reducing gas can be introduced to convert the oxide of nitrogen pollutants to nitrogen.

Do different stakeholder groups share mental health research priorities? A four-arm Delphi study.

PubMed

Owens, Christabel; Ley, Ann; Aitken, Peter

2008-12-01

Despite considerable investment in research priority setting within diverse fields of healthcare, little is known about the extent to which different stakeholder groups share research priorities. Conflicting priorities may jeopardize stakeholder engagement in research. To identify the research priorities of different stakeholder groups within mental health care and examine the extent and nature of agreement between them. Using a Delphi technique, we conducted parallel consultation processes within four different stakeholder groups. Each group process consisted of three rounds. The study was carried out within a mental health and learning disabilities trust in southern England. Participants were recruited from the following groups: mental health service users (34), informal carers (26), mental health practitioners (35) and service managers (23). There were striking differences between the four groups in respect of their ability and willingness to make priority decisions. These differences notwithstanding, there was considerable overlap in respect of their research interests. All groups identified and attached high importance to issues relating to the promotion of independence, self-esteem and recovery. The quality of in-patient care, the place of psychological therapies and the relationship between physical and mental health also emerged across the board. The confluence of four different stakeholder groups around a number of clear themes is highly encouraging, providing a framework within which to construct a research agenda and suggesting that mental health research can be built on solid partnerships.

Stability of solid oxide fuel cell materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, T.R.; Bates, J.L.; Chick, L.A.

1996-04-01

Interconnection materials in a solid oxide fuel cell are exposed to both highly oxidizing conditions at the cathode and to highly reducing conditions at the anode. The thermal expansion characteristics of substituted lanthanum and yttrium chromite interconnect materials were evaluated by dilatometry as a function of oxygen partial pressures from 1 atm to 10{sup -18} atm, controlled using a carbon dioxide/hydrogen buffer.

Monoclinic Sr(1-x)Na(x)SiO(3-0.5x): new superior oxide ion electrolytes.

PubMed

Singh, Preetam; Goodenough, John B

2013-07-10

Oxide ion electrolytes determine the temperature of operation of solid oxide fuel cells, oxygen separation membranes, and oxygen sensors. There is a strong incentive to lower their operating temperatures, in a solid oxide fuel cell, for example, from Top > 800 °C to Top ≈ 500 °C. The use of low-cost Na(+) rather than K(+) as the dopant in monoclinic SrSiO3 (C12/C1) is shown to provide a larger solid solution range (0 < x ≤ 0.45) in Sr1-xNaxSiO3-0.5x and to achieve an oxide ion conductivity σo ≥ 10(-2) S·cm(-1) by 525 °C as a result of lowering the temperature of a smooth transition to full disorder of the mobile oxide ions. The Sr1-xNaxSiO3-0.5x electrolytes are much less hygroscopic than Sr1-xKxSiO3-0.5x and are stable with a nickel composite anode in 5% H2/Ar as well as with cathodes such as La1-xSrxMnO3-δ and Sr0.7Y0.3CoO3-δ in air, which makes them candidate electrolytes for intermediate-temperature solid oxide fuel cells or for other applications of oxide ion electrolytes.

Solid oxide MEMS-based fuel cells

DOEpatents

Jankowksi, Alan F.; Morse, Jeffrey D.

2007-03-13

A micro-electro-mechanical systems (MEMS) based thin-film fuel cells for electrical power applications. The MEMS-based fuel cell may be of a solid oxide type (SOFC), a solid polymer type (SPFC), or a proton exchange membrane type (PEMFC), and each fuel cell basically consists of an anode and a cathode separated by an electrolyte layer. The electrolyte layer can consist of either a solid oxide or solid polymer material, or proton exchange membrane electrolyte materials may be used. Additionally catalyst layers can also separate the electrodes (cathode and anode) from the electrolyte. Gas manifolds are utilized to transport the fuel and oxidant to each cell and provide a path for exhaust gases. The electrical current generated from each cell is drawn away with an interconnect and support structure integrated with the gas manifold. The fuel cells utilize integrated resistive heaters for efficient heating of the materials. By combining MEMS technology with thin-film deposition technology, thin-film fuel cells having microflow channels and full-integrated circuitry can be produced that will lower the operating temperature an will yield an order of magnitude greater power density than the currently known fuel cells.

Determining the Release of Radionuclides from Tank 18F Waste Residual Solids: FY2016 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, William D.; Hobbs, David T.

Pore water leaching studies were conducted on actual Savannah River Site (SRS) Tank 18F residual waste solids to support Liquid Waste tank closure efforts. A test methodology was developed during previous simulant testing to produce slurries of tank residual solids and grout-representative solids in grout pore water solutions (based on SRS groundwater compositions) with pH and E h values expected during the aging of the closed waste tank. The target conditions are provided below where the initial pore water has a reducing potential and a relatively high pH (Reducing Region II). The pore water is expected to become increasingly oxidizingmore » with time (Oxidizing Region II) and during the latter stages of aging (Oxidizing Region III) the pH is expected to decrease. For the reducing case, tests were conducted with both unwashed and washed Tank 18F residual solids. For the oxidizing cases (Oxidizing Regions II and III), all samples were washed with simulated grout pore water solutions prior to testing, since it is expected that these conditions will occur after considerable pore water solution has passed through the system. For the reducing case, separate tests were conducted with representative ground grout solids and with calcium carbonate reagent, which is the grout phase believed to be controlling the pH. Ferrous sulfide (FeS) solids were also added to the reducing samples to lower the slurry E h value. Calcium carbonate solids were used as the grout-representative solid phase for each of the oxidizing cases. Air purge-gas with and without CO 2 removed was transferred through the oxidizing test samples and nitrogen purge-gas was transferred through the reducing test samples during leach testing. The target pH values were achieved to within 0.5 pH units for all samples. Leaching studies were conducted over an E h range of approximately 0.7 V. However, the highest and lowest E h values achieved of ~+0.5 V and ~-0.2 V were significantly less positive and less negative, respectively, than the target values. Achievement of more positive and more negative E h values is believed to require the addition of non-representative oxidants and reductants, respectively.« less

Laser surface treatment of porous ceramic substrate for application in solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Mahmod, D. S. A.; Khan, A. A.; Munot, M. A.; Glandut, N.; Labbe, J. C.

2016-08-01

Laser has offered a large number of benefits for surface treatment of ceramics due to possibility of localized heating, very high heating/cooling rates and possibility of growth of structural configurations only produced under non-equilibrium high temperature conditions. The present work investigates oxidation of porous ZrB2-SiC sintered ceramic substrates through treatment by a 1072 ± 10 nm ytterbium fiber laser. A multi-layer structure is hence produced showing successively oxygen rich distinct layers. The porous bulk beneath these layers remained unaffected as this laser-formed oxide scale and protected the substrate from oxidation. A glassy SiO2 structure thus obtained on the surface of the substrate becomes subject of interest for further research, specifically for its utilization as solid protonic conductor in Solid Oxide Fuel Cells (SOFCs).

Three-phase boundary length in solid-oxide fuel cells: A mathematical model

NASA Astrophysics Data System (ADS)

Janardhanan, Vinod M.; Heuveline, Vincent; Deutschmann, Olaf

A mathematical model to calculate the volume specific three-phase boundary length in the porous composite electrodes of solid-oxide fuel cell is presented. The model is exclusively based on geometrical considerations accounting for porosity, particle diameter, particle size distribution, and solids phase distribution. Results are presented for uniform particle size distribution as well as for non-uniform particle size distribution.

Solid-State Reaction Between Fe-Al-Ca Alloy and Al2O3-CaO-FeO Oxide During Heat Treatment at 1473 K (1200 °C)

NASA Astrophysics Data System (ADS)

Liu, Chengsong; Yang, Shufeng; Li, Jingshe; Ni, Hongwei; Zhang, Xueliang

2017-04-01

The aim of this study was to control the physicochemical characteristics of inclusions in steel through appropriate heat treatment. Using a confocal scanning laser microscope (CSLM) and pipe furnace, the solid-state reactions between Fe-Al-Ca alloy and Al2O3-CaO-FeO oxide during heat treatment at 1473 K (1200 °C) and the influence of these reactions on the compositions of and phases in the alloy and oxide were investigated by the diffusion couple method. Suitable pretreatment of the oxide using a CSLM and production of the diffusion couple of Fe-Al-Ca alloy and Al2O3-CaO-FeO oxide gave good contact between the alloy and oxide. The diffusion couple was then sealed in a quartz tube with a piece of Ti foil to lower oxygen partial pressure and a block of Fe-Al-Ca alloy was introduced to conduct heat treatment experiments. Solid-state reactions between the alloy and oxide during heat treatment at 1473 K (1200 °C) were analyzed and discussed. A dynamic model to calculate the width of the particle precipitation zone based on the Wagner model of internal oxidation of metal was proposed. This model was helpful to understand the solid-state reaction mechanism between Fe-Al-Ca alloy and Al2O3-CaO-FeO oxide.

Propulsion and Power Rapid Response R&D Support Delivery Order 0041: Power Dense Solid Oxide Fuel Cell Systems: High Performance, High Power Density Solid Oxide Fuel Cells - Materials and Load Control

DTIC Science & Technology

2008-12-01

respectively. 2.3.1.2 Brushless DC Motor Brushless direct current ( BLDC ) motors feature high efficiency, ease of control , and astonishingly high power...modeling purposes, we ignore the modeling complexity of the BLDC controller and treat the motor and controller “as commutated”, i.e. we assume the...High Performance, High Power Density Solid Oxide Fuel Cells− Materials and Load Control Stephen W. Sofie, Steven R. Shaw, Peter A. Lindahl, and Lee H

Regeneration of sulfated metal oxides and carbonates

DOEpatents

Hubble, Bill R.; Siegel, Stanley; Cunningham, Paul T.

1978-03-28

Alkali metal or alkaline earth metal carbonates such as calcium carbonate and magnesium carbonate found in dolomite or limestone are employed for removal of sulfur dioxide from combustion exhaust gases. The sulfated carbonates are regenerated to oxides through use of a solid-solid reaction, particularly calcium sulfide with calcium sulfate to form calcium oxide and sulfur dioxide gas. The regeneration is performed by contacting the sulfated material with a reductant gas such as hydrogen within an inert diluent to produce calcium sulfide in mixture with the sulfate under process conditions selected to permit the sulfide-sulfate, solid-state reaction to occur.

Zinc-aluminum oxide solid solution nanosheets obtained by pyrolysis of layered double hydroxide as the photoanodes for dye-sensitized solar cells.

PubMed

Xu, Zhiyuan; Shi, Jingjing; Haroone, Muhammad Sohail; Chen, Wenpeng; Zheng, Shufang; Lu, Jun

2018-04-01

Due to the superiority of metal-doped ZnO compared to TiO 2 , the Zn-M (M = Al 3+ , Ga 3+ , Cr 3+ , Ti 4+ , Ce 4+ ) mixed metal oxide solid solutions have been extensively studied for photocatalytic and photovoltaic applications. In this work, a systematic research has proceeded for the preparation of a zinc-aluminum oxide semiconductor as a photoanode for the dye-sensitized solar cells (DSSCs) by a simple pyrolysis route with the Zn-Al layered double hydroxide (LDH) as a precursor. The Zn-Al oxide solid solution has been applied for DSSCs as an electron acceptor, which is used to study the influence of different Al content and sintering temperature on the device efficiency. Finally, the Zn-Al oxide solid solution with calcination temperature 600 °C and Al 27 at.% content exhibits the best performance. The photoelectric efficiency improved 100 times when the Al 3+ content decreased from 44 to 27 at.%. The Zn x Al y O solid solution show a reasonable efficiency as photoanode materials in DSSCs, with the best preliminary performance reported so far, and shows its potential application for the photovoltaic devices. Copyright © 2018 Elsevier Inc. All rights reserved.

Infiltrated La0.4Sr0.4Fe0.03Ni0.03Ti0.94O3 based anodes for all ceramic and metal supported solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Nielsen, Jimmi; Persson, Åsa H.; Sudireddy, Bhaskar R.; Irvine, John T. S.; Thydén, Karl

2017-12-01

For improved robustness, durability and to avoid severe processing challenges alternatives to the Ni:YSZ composite electrode is highly desirable. The Ni:YSZ composite electrode is conventionally used for solid oxide fuel cell and solid oxide electrolysis cell. In the present study we report on high performing nanostructured Ni:CGO electrocatalyst coated A site deficient Lanthanum doped Strontium Titanate (La0.4Sr0.4Fe0.03Ni0.03Ti0.94O3) based anodes. The anodes were incorporated into the co-sintered DTU metal supported solid oxide fuel cell design and large sized 12 cm × 12 cm cells were fabricated. The titanate material showed good processing characteristics and surface wetting properties towards the Ni:CGO electrocatalyst coating. The cell performances were evaluated on single cell level (active area 16 cm2) and a power density at 0.7 V and 700 °C of 0.650 Wcm-2 with a fuel utilization of 31% was achieved. Taking the temperature into account the performances of the studied anodes are among the best reported for redox stable and corrosion resistant alternatives to the conventional Ni:YSZ composite solid oxide cell electrode.

Three decision-making aids: brainstorming, nominal group, and Delphi technique.

PubMed

McMurray, A R

1994-01-01

The methods of brainstorming, Nominal Group Technique, and the Delphi technique can be important resources for nursing staff development educators who wish to expand their decision-making skills. Staff development educators may find opportunities to use these methods for such tasks as developing courses, setting departmental goals, and forecasting trends for planning purposes. Brainstorming, Nominal Group Technique, and the Delphi technique provide a structured format that helps increase the quantity and quality of participant responses.

Determining the Essential Components of State and Institution Dual Credit Program Policy in New Mexico: A Delphi Study with High School and College Experts

ERIC Educational Resources Information Center

Carlson, Gregory Dean

2013-01-01

The purpose of this Delphi study was to determine the essential components of dual credit in New Mexico. Dual credit experts from colleges and high schools in New Mexico were asked to participate in a three-round Delphi study to determine what the future policy of dual credit should be, and why it should be that way. Definitions of dual credit may…

Final Report of the AMC Committee-Armament. Armament Development Center Concept Plan. Volume 2

DTIC Science & Technology

1974-12-01

Considerations 111-22 Section C Operational Considerations 111-26 Section D Community Economic Impact 111-35 Statements Section E Delphi Benefit Analysis 111-37...Cost Analysis 111-3 B Personnel Considerations III-22 C Operational Considerations 111-26 D Community Economic Impact Statements 111-35 E Delphi ...sidered to be minimal. 111-36 S SECTION E. Delphi Benefit Analysis 1. Introduction. The assessment and comparison of the relative benefits of the various

Development of a nationwide consensus syllabus of palliative medicine for undergraduate medical education in Japan: a modified Delphi method.

PubMed

Kizawa, Yoshiyuki; Tsuneto, Satoru; Tamba, Kaichiro; Takamiya, Yusuke; Morita, Tatsuya; Bito, Seiji; Otaki, Junji

2012-07-01

There is currently no consensus syllabus of palliative medicine for undergraduate medical education in Japan, although the Cancer Control Act proposed in 2007 covers the dissemination of palliative care. To develop a nationwide consensus syllabus of palliative medicine for undergraduate medical education in Japan using a modified Delphi method. We adopted the following three-step method: (1) a workshop to produce the draft syllabus; (2) a survey-based provisional syllabus; (3) Delphi rounds and a panel meeting (modified Delphi method) to produce the working syllabus. Educators in charge of palliative medicine from 63% of the medical schools in Japan collaborated to develop a survey-based provisional syllabus before the Delphi rounds. A panel of 32 people was then formed for the modified Delphi rounds comprising 28 educators and experts in palliative medicine, one cancer survivor, one bereaved family member, and two medical students. The final consensus syllabus consists of 115 learning objectives across seven sections as follows: basic principles; disease process and comprehensive assessment; symptom management; psychosocial care; cultural, religious, and spiritual issues; ethical issues; and legal frameworks. Learning objectives were categorized as essential or desirable (essential: 66; desirable: 49). A consensus syllabus of palliative medicine for undergraduate medical education was developed using a clear and innovative methodology. The final consensus syllabus will be made available for further dissemination of palliative care education throughout the country.

Jet fuel based high pressure solid oxide fuel cell system

NASA Technical Reports Server (NTRS)

Gummalla, Mallika (Inventor); Yamanis, Jean (Inventor); Olsommer, Benoit (Inventor); Dardas, Zissis (Inventor); Bayt, Robert (Inventor); Srinivasan, Hari (Inventor); Dasgupta, Arindam (Inventor); Hardin, Larry (Inventor)

2013-01-01

A power system for an aircraft includes a solid oxide fuel cell system which generates electric power for the aircraft and an exhaust stream; and a heat exchanger for transferring heat from the exhaust stream of the solid oxide fuel cell to a heat requiring system or component of the aircraft. The heat can be transferred to fuel for the primary engine of the aircraft. Further, the same fuel can be used to power both the primary engine and the SOFC. A heat exchanger is positioned to cool reformate before feeding to the fuel cell. SOFC exhaust is treated and used as inerting gas. Finally, oxidant to the SOFC can be obtained from the aircraft cabin, or exterior, or both.

Jet Fuel Based High Pressure Solid Oxide Fuel Cell System

NASA Technical Reports Server (NTRS)

Srinivasan, Hari (Inventor); Hardin, Larry (Inventor); Gummalla, Mallika (Inventor); Yamanis, Jean (Inventor); Olsommer, Benoit (Inventor); Dardas, Zissis (Inventor); Dasgupta, Arindam (Inventor); Bayt, Robert (Inventor)

2015-01-01

A power system for an aircraft includes a solid oxide fuel cell system which generates electric power for the aircraft and an exhaust stream; and a heat exchanger for transferring heat from the exhaust stream of the solid oxide fuel cell to a heat requiring system or component of the aircraft. The heat can be transferred to fuel for the primary engine of the aircraft. Further, the same fuel can be used to power both the primary engine and the SOFC. A heat exchanger is positioned to cool reformate before feeding to the fuel cell. SOFC exhaust is treated and used as inerting gas. Finally, oxidant to the SOFC can be obtained from the aircraft cabin, or exterior, or both.

A novel accelerated oxidative stability screening method for pharmaceutical solids.

PubMed

Zhu, Donghua Alan; Zhang, Geoff G Z; George, Karen L S T; Zhou, Deliang

2011-08-01

Despite the fact that oxidation is the second most frequent degradation pathway for pharmaceuticals, means of evaluating the oxidative stability of pharmaceutical solids, especially effective stress testing, are still lacking. This paper describes a novel experimental method for peroxide-mediated oxidative stress testing on pharmaceutical solids. The method utilizes urea-hydrogen peroxide, a molecular complex that undergoes solid-state decomposition and releases hydrogen peroxide vapor at elevated temperatures (e.g., 30°C), as a source of peroxide. The experimental setting for this method is simple, convenient, and can be operated routinely in most laboratories. The fundamental parameter of the system, that is, hydrogen peroxide vapor pressure, was determined using a modified spectrophotometric method. The feasibility and utility of the proposed method in solid form selection have been demonstrated using various solid forms of ephedrine. No degradation was detected for ephedrine hydrochloride after exposure to the hydrogen peroxide vapor for 2 weeks, whereas both anhydrate and hemihydrate free base forms degraded rapidly under the test conditions. In addition, both the anhydrate and the hemihydrate free base degraded faster when exposed to hydrogen peroxide vapor at 30°C under dry condition than at 30°C/75% relative humidity (RH). A new degradation product was also observed under the drier condition. The proposed method provides more relevant screening conditions for solid dosage forms, and is useful in selecting optimal solid form(s), determining potential degradation products, and formulation screening during development. Copyright © 2011 Wiley-Liss, Inc.

Delphi based consensus study into planning for chemical incidents.

PubMed

Crawford, I W F; Mackway-Jones, K; Russell, D R; Carley, S D

2004-01-01

To achieve consensus in all phases of chemical incident planning and response. A three round Delphi study was conducted using a panel of 39 experts from specialties involved in the management of chemical incidents. Areas that did not reach consensus in the Delphi study were presented as synopsis statements for discussion in four syndicate groups at a conference hosted by the Department of Health Emergency Planning Co-ordination Unit. A total of 183 of 322 statements had reached consensus upon completion of the Delphi study. This represented 56.8% of the total number of statements. Of these, 148 reached consensus at >94% and 35 reached consensus at >89%. The results of the process are presented as a series of synopsis consensus statements that cover all phases of chemical incident planning and response. The use of a Delphi study and subsequent syndicate group discussions achieved consensus in aspects of all phases of chemical incident planning and response that can be translated into practical guidance for use at regional prehospital and hospital level. Additionally, areas of non-consensus have been identified where further work is required.

Taxonomy of the common dolphins of the Eastern Pacific Ocean

USGS Publications Warehouse

Banks, R.C.; Brownell, R.

1969-01-01

Delphinus bairdii Dall is a species of dolphin distinct from D. delphis Linnaeus, with which it has usually been synonymized. D. bairdii has a longer rostrum relative to the zygomatic width of the skull; the ratio of these measurements falls at 1.55 or above for bairdii and 1.53 and below for delphis. In the eastern Pacific Ocean, D. bairdii is found in the Gulf of California and along the west coast of Baja California, Mexico; D. delphis is presently found in the waters off California. Until approximately the beginning of the present century, bairdii occurred farther north in the eastern Pacific Ocean, at least to the Monterey Bay area of California. Restriction of bairdii to more southerly waters, probably as an indirect result of a change in water temperature, may have permitted delphis to move into inshore Californian waters. The Pacific population of D. delphis has a somewhat shorter rostrum than the Atlantic population, and is perhaps subspecifically different. A thorough analysis of the entire genus Delphinus is needed before the relationship of all the populations can be understood and names properly applied.

Development of quality indicators for physiotherapy for patients with PAOD in the Netherlands: a Delphi study.

PubMed

Gijsbers, H J H; Lauret, G J; van Hofwegen, A; van Dockum, T A; Teijink, J A W; Hendriks, H J M

2016-06-01

The aim of the study was to develop quality indicators (QIs) for physiotherapy management of patients with intermittent claudication (IC) in the Netherlands. As part of an international six-step method to develop QIs, an online survey Delphi-procedure was completed. After two Delphi-rounds a validation round was performed. Twenty-six experts were recruited to participate in this study. Twenty-four experts completed two Delphi-rounds. A third round was conducted inviting 1200 qualified and registered physiotherapists of the Dutch integrated care network 'Claudicationet' to validate a draft set of quality indicators. Out of 83 potential QIs in the Dutch physiotherapy guideline on 'Intermittent claudication', consensus among the experts selected nine indicators. All nine quality indicators were validated by 300 physiotherapists. A final set of nine indicators was derived from (1) a Dutch evidence-based physiotherapy guideline, (2) an expert Delphi procedure and (3) a validation by 300 physiotherapists. This set of indicators should be validated in clinical practice. Copyright © 2015 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Delphi based consensus study into planning for chemical incidents

PubMed Central

Crawford, I; Mackway-Jones, K; Russell, D; Carley, S

2004-01-01

Objective: To achieve consensus in all phases of chemical incident planning and response. Design: A three round Delphi study was conducted using a panel of 39 experts from specialties involved in the management of chemical incidents. Areas that did not reach consensus in the Delphi study were presented as synopsis statements for discussion in four syndicate groups at a conference hosted by the Department of Health Emergency Planning Co-ordination Unit. Results: A total of 183 of 322 statements had reached consensus upon completion of the Delphi study. This represented 56.8% of the total number of statements. Of these, 148 reached consensus at >94% and 35 reached consensus at >89%. The results of the process are presented as a series of synopsis consensus statements that cover all phases of chemical incident planning and response. Conclusions: The use of a Delphi study and subsequent syndicate group discussions achieved consensus in aspects of all phases of chemical incident planning and response that can be translated into practical guidance for use at regional prehospital and hospital level. Additionally, areas of non-consensus have been identified where further work is required. PMID:14734369

Method for producing metal oxide nanoparticles

DOEpatents

Phillips, Jonathan [Santa Fe, NM; Mendoza, Daniel [Santa Fe, NM; Chen, Chun-Ku [Albuquerque, NM

2008-04-15

Method for producing metal oxide nanoparticles. The method includes generating an aerosol of solid metallic microparticles, generating plasma with a plasma hot zone at a temperature sufficiently high to vaporize the microparticles into metal vapor, and directing the aerosol into the hot zone of the plasma. The microparticles vaporize in the hot zone into metal vapor. The metal vapor is directed away from the hot zone and into the cooler plasma afterglow where it oxidizes, cools and condenses to form solid metal oxide nanoparticles.

Direct hydrocarbon fuel cells

DOEpatents

Barnett, Scott A.; Lai, Tammy; Liu, Jiang

2010-05-04

The direct electrochemical oxidation of hydrocarbons in solid oxide fuel cells, to generate greater power densities at lower temperatures without carbon deposition. The performance obtained is comparable to that of fuel cells used for hydrogen, and is achieved by using novel anode composites at low operating temperatures. Such solid oxide fuel cells, regardless of fuel source or operation, can be configured advantageously using the structural geometries of this invention.

Effects of a reactive barrier and aquifer geology on metal distribution and mobility in a mine drainage impacted aquifer.

PubMed

Doerr, Nora A; Ptacek, Carol J; Blowes, David W

2005-06-01

The Nickel Rim aquifer has been impacted for five decades by a metal-rich plume generated from the Nickel Rim mine tailings impoundment. Metals released by the oxidation of pyrrhotite in the unsaturated zone of the tailings migrate into the downgradient aquifer, affecting both the groundwater and the aquifer solids. A reactive barrier has been installed in the aquifer to remove sulfate and metals from the groundwater. The effect of the reactive barrier on metal concentrations in the aquifer solids has not previously been studied. In this study, a series of selective extraction procedures was applied to cores of aquifer sediment, to ascertain the distribution of metals among various solid phases present in the aquifer. Extraction results were combined with groundwater chemistry, geochemical modelling and solid-phase microanalyses, to assess the potential mobility of metals under changing geochemical conditions. Reactions within the reactive barrier caused an increase in the solid-phase carbonate content downgradient from the barrier. The concentrations of poorly crystalline, oxidized phases of Mn and Fe, as well as concentrations of Cr(III) associated with oxidized Fe, and poorly crystalline Zn, are lower downgradient from the barrier, whereas total solid-phase metal concentrations remain constant. Iron and Mn accumulate as oxidized, easily extractable forms in a peat layer overlying the aquifer. Although these oxides may buffer reducing plumes, they also have the potential to release metals to the groundwater, should a reduced condition be imposed on the aquifer by remedial actions.

Air feed tube support system for a solid oxide fuel cell generator

DOEpatents

Doshi, Vinod B.; Ruka, Roswell J.; Hager, Charles A.

2002-01-01

A solid oxide fuel cell generator (12), containing tubular fuel cells (36) with interior air electrodes (18), where a supporting member (82) containing a plurality of holes (26) supports oxidant feed tubes (51), which pass from an oxidant plenum (52") into the center of the fuel cells, through the holes (26) in the supporting member (82), where a compliant gasket (86) around the top of the oxidant feed tubes and on top (28) of the supporting member (82) helps support the oxidant feed tubes and center them within the fuel cells, and loosen the tolerance for centering the air feed tubes.

Biomineralization associated with microbial reduction of Fe3+ and oxidation of Fe2+ in solid minerals

USGS Publications Warehouse

Zhang, G.; Dong, H.; Jiang, H.; Kukkadapu, R.K.; Kim, J.; Eberl, D.; Xu, Z.

2009-01-01

Iron-reducing and oxidizing microorganisms gain energy through reduction or oxidation of iron, and by doing so play an important role in the geochemical cycling of iron. This study was undertaken to investigate mineral transformations associated with microbial reduction of Fe3+ and oxidation of Fe2+ in solid minerals. A fluid sample from the 2450 m depth of the Chinese Continental Scientific Drilling project was collected, and Fe3+-reducing and Fe2+-oxidizing microorganisms were enriched. The enrichment cultures displayed reduction of Fe3+ in nontronite and ferric citrate, and oxidation of Fe2+ in vivianite, siderite, and monosulfide (FeS). Additional experiments verified that the iron reduction and oxidation was biological. Oxidation of FeS resulted in the formation of goethite, lepidocrocite, and ferrihydrite as products. Although our molecular microbiological analyses detected Thermoan-aerobacter ethanolicus as a predominant organism in the enrichment culture, Fe3+ reduction and Fe2+ oxidation may be accomplished by a consortia of organisms. Our results have important environmental and ecological implications for iron redox cycling in solid minerals in natural environments, where iron mineral transformations may be related to the mobility and solubility of inorganic and organic contaminants.

Program of scientific investigations and development of solid-oxide fuel cells (SOFC) in VIITF proposals on scientific and technical collaboration and SOFC commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kleschev, Yu.N.; Chulharev, V.F.

1996-04-01

Investigations being performed at VNIITF covers the whole cycle of solid oxide fuel cell manufacturing. This report describes the main directions of investigations in materials, technologies, and commercialization.

Solid state oxygen anion and electron mediating membrane and catalytic membrane reactors containing them

DOEpatents

Schwartz, Michael; White, James H.; Sammells, Anthony F.

2005-09-27

This invention relates to gas-impermeable, solid state materials fabricated into membranes for use in catalytic membrane reactors. This invention particularly relates to solid state oxygen anion- and electron-mediating membranes for use in catalytic membrane reactors for promoting partial or full oxidation of different chemical species, for decomposition of oxygen-containing species, and for separation of oxygen from other gases. Solid state materials for use in the membranes of this invention include mixed metal oxide compounds having the brownmillerite crystal structure.

Solid state oxygen anion and electron mediating membrane and catalytic membrane reactors containing them

DOEpatents

Schwartz, Michael; White, James H.; Sammels, Anthony F.

2000-01-01

This invention relates to gas-impermeable, solid state materials fabricated into membranes for use in catalytic membrane reactors. This invention particularly relates to solid state oxygen anion- and electron-mediating membranes for use in catalytic membrane reactors for promoting partial or full oxidation of different chemical species, for decomposition of oxygen-containing species, and for separation of oxygen from other gases. Solid state materials for use in the membranes of this invention include mixed metal oxide compounds having the brownmillerite crystal structure.

The Structure and Properties of Plasma Sprayed Iron Oxide Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors

NASA Astrophysics Data System (ADS)

Puranen, Jouni; Lagerbom, Juha; Hyvärinen, Leo; Kylmälahti, Mikko; Himanen, Olli; Pihlatie, Mikko; Kiviaho, Jari; Vuoristo, Petri

2011-01-01

Manganese cobalt oxide spinel doped with Fe2O3 was studied as a protective coating on ferritic stainless steel interconnects. Chromium alloying causes problems at high operation temperatures in such oxidizing conditions where chromium compounds evaporate and poison the cathode active area, causing the degradation of the solid oxide fuel cell. In order to prevent chromium evaporation, these interconnectors need a protective coating to block the chromium evaporation and to maintain an adequate electrical conductivity. Thermal spraying is regarded as a promising way to produce dense and protective layers. In the present work, the ceramic Mn-Co-Fe oxide spinel coatings were produced by using the atmospheric plasma spray process. Coatings with low thickness and low amount of porosity were produced by optimizing deposition conditions. The original spinel structure decomposed because of the fast transformation of solid-liquid-solid states but was partially restored by using post-annealing treatment.

Alchemy of the Oracle: The Delphi Technique.

ERIC Educational Resources Information Center

Wilhelm, William J.

2001-01-01

Discusses the origins and foundations of the Delphi technique. Outlines procedures for using it in research to obtain the insights of experts. Addresses limitations of the technique. (Contains 44 references.) (SK)

A Delphi study and ranking exercise to support commissioning services: future delivery of Thrombectomy services in England.

PubMed

Halvorsrud, Kristoffer; Flynn, Darren; Ford, Gary A; McMeekin, Peter; Bhalla, Ajay; Balami, Joyce; Craig, Dawn; White, Phil

2018-02-22

Intra-arterial thrombectomy is the gold standard treatment for large artery occlusive stroke. However, the evidence of its benefits is almost entirely based on trials delivered by experienced neurointerventionists working in established teams in neuroscience centres. Those responsible for the design and prospective reconfiguration of services need access to a comprehensive and complementary array of information on which to base their decisions. This will help to ensure the demonstrated effects from trials may be realised in practice and account for regional/local variations in resources and skill-sets. One approach to elucidate the implementation preferences and considerations of key experts is a Delphi survey. In order to support commissioning decisions, we aimed using an electronic Delphi survey to establish consensus on the options for future organisation of thrombectomy services among physicians with clinical experience in managing large artery occlusive stroke. A Delphi survey was developed with 12 options for future organisation of thrombectomy services in England. A purposive sampling strategy established an expert panel of stroke physicians from the British Association of Stroke Physicians (BASP) Clinical Standards and/or Executive Membership that deliver 24/7 intravenous thrombolysis. Options with aggregate scores falling within the lowest quartile were removed from the subsequent Delphi round. Options reaching consensus following the two Delphi rounds were then ranked in a final exercise by both the wider BASP membership and the British Society of Neuroradiologists (BSNR). Eleven stroke physicians from BASP completed the initial two Delphi rounds. Three options achieved consensus, with subsequently wider BASP (97%, n = 43) and BSNR members (86%, n = 21) assigning the highest approval rankings in the final exercise for transferring large artery occlusive stroke patients to nearest neuroscience centre for thrombectomy based on local CT/CT Angiography. The initial Delphi rounds ensured optimal reduction of options by an expert panel of stroke physicians, while subsequent ranking exercises allowed remaining options to be ranked by a wider group of experts within stroke to reach consensus. The preferred implementation option for thrombectomy is investigating suspected acute stroke patients by CT/CT Angiography and secondary transfer of large artery occlusive stroke patients to the nearest neuroscience (thrombectomy) centre.

Tilts, dopants, vacancies and non-stoichiometry: Understanding and designing the properties of complex solid oxide perovskites from first principles

NASA Astrophysics Data System (ADS)

Bennett, Joseph W.

Perovskite oxides of formula ABO3 have a wide range of structural, electrical and mechanical properties, making them vital materials for many applications, such as catalysis, ultrasound machines and communication devices. Perovskite solid solutions with high piezoelectric response, such as ferroelectrics, are of particular interest as they can be employed as sensors in SONAR devices. Ferroelectric materials are unique in that their chemical and electrical properties can be non-invasively and reversibly changed, by switching the bulk polarization. This makes ferroelectrics useful for applications in non-volatile random access memory (NVRAM) devices. Perovskite solid solutions with a lower piezoelectric response than ferroelectrics are important for communication technology, as they function well as electroceramic capacitors. Also of interest is how these materials act as a component in a solid oxide fuel cell, as they can function as an efficient source of energy. Altering the chemical composition of these solid oxide materials offers an opportunity to change the desired properties of the final ceramic, adding a degree of flexibility that is advantageous for a variety of applications. These solid oxides are complex, sometimes disordered systems that are a challenge to study experimentally. However, as it is their complexity which produces favorable properties, highly accurate modeling which captures the essential features of the disordered structure is necessary to explain the behavior of current materials and predict favorable compositions for new materials. Methodological improvements and faster computer speeds have made first-principles and atomistic calculations a viable tool for understanding these complex systems. Offering a combination of accuracy and computational speed, the density functional theory (DFT) approach can reveal details about the microscopic structure and interactions of complex systems. Using DFT and a combination of principles from both inorganic chemistry and materials science, I have been able to gain insights into solid oxide perovskite-based systems.

Solid polymer electrolyte compositions

DOEpatents

Garbe, James E.; Atanasoski, Radoslav; Hamrock, Steven J.; Le, Dinh Ba

2001-01-01

An electrolyte composition is featured that includes a solid, ionically conductive polymer, organically modified oxide particles that include organic groups covalently bonded to the oxide particles, and an alkali metal salt. The electrolyte composition is free of lithiated zeolite. The invention also features cells that incorporate the electrolyte composition.

Facile solid-state synthesis of oxidation-resistant metal nanoparticles at ambient conditions

NASA Astrophysics Data System (ADS)

Lee, Kyu Hyung; Jung, Hyuk Joon; Lee, Ju Hee; Kim, Kyungtae; Lee, Byeongno; Nam, Dohyun; Kim, Chung Man; Jung, Myung-Hwa; Hur, Nam Hwi

2018-05-01

A simple and scalable method for the synthesis of metal nanoparticles in the solid-state was developed, which can produce nanoparticles in the absence of solvents. Nanoparticles of coinage metals were synthesized by grinding solid hydrazine and the metal precursors in their acetates and oxides at 25 °C. The silver and gold acetates converted completely within 6 min into Ag and Au nanoparticles, respectively, while complete conversion of the copper acetate to the Cu sub-micrometer particles took about 2 h. Metal oxide precursors were also converted into metal nanoparticles by grinding alone. The resulting particles exhibit distinctive crystalline lattice fringes, indicating the formation of highly crystalline phases. The Cu sub-micrometer particles are better resistant to oxidation and exhibit higher conductivity compared to conventional Cu nanoparticles. This solid-state method was also applied for the synthesis of platinum group metals and intermetallic Cu3Au, which can be further extended to synthesize other metal nanoparticles.

Robust, functional nanocrystal solids by infilling with atomic layer deposition.

PubMed

Liu, Yao; Gibbs, Markelle; Perkins, Craig L; Tolentino, Jason; Zarghami, Mohammad H; Bustamante, Jorge; Law, Matt

2011-12-14

Thin films of colloidal semiconductor nanocrystals (NCs) are inherently metatstable materials prone to oxidative and photothermal degradation driven by their large surface-to-volume ratios and high surface energies. (1) The fabrication of practical electronic devices based on NC solids hinges on preventing oxidation, surface diffusion, ripening, sintering, and other unwanted physicochemical changes that can plague these materials. Here we use low-temperature atomic layer deposition (ALD) to infill conductive PbSe NC solids with metal oxides to produce inorganic nanocomposites in which the NCs are locked in place and protected against oxidative and photothermal damage. Infilling NC field-effect transistors and solar cells with amorphous alumina yields devices that operate with enhanced and stable performance for at least months in air. Furthermore, ALD infilling with ZnO lowers the height of the inter-NC tunnel barrier for electron transport, yielding PbSe NC films with electron mobilities of 1 cm2 V(-1) s(-1). Our ALD technique is a versatile means to fabricate robust NC solids for optoelectronic devices.

Thermodynamic analysis of Direct Urea Solid Oxide Fuel Cell in combined heat and power applications

NASA Astrophysics Data System (ADS)

Abraham, F.; Dincer, I.

2015-12-01

This paper presents a comprehensive steady state modelling and thermodynamic analysis of Direct Urea Solid Oxide Fuel Cell integrated with Gas Turbine power cycle (DU-SOFC/GT). The use of urea as direct fuel mitigates public health and safety risks associated with the use of hydrogen and ammonia. The integration scheme in this study covers both oxygen ion-conducting solid oxide fuel cells (SOFC-O) and hydrogen proton-conducting solid oxide fuel cells (SOFC-H). Parametric case studies are carried out to investigate the effects of design and operating parameters on the overall performance of the system. The results reveal that the fuel cell exhibited the highest level of exergy destruction among other system components. Furthermore, the SOFC-O based system offers better overall performance than that with the SOFC-H option mainly due to the detrimental reverse water-gas shift reaction at the SOFC anode as well as the unique configuration of the system.

Protective interlayer for high temperature solid electrolyte electrochemical cells

DOEpatents

Singh, Prabhakar; Vasilow, Theodore R.; Richards, Von L.

1996-01-01

The invention comprises of an electrically conducting doped or admixed cerium oxide composition with niobium oxide and/or tantalum oxide for electrochemical devices, characterized by the general formula: Nb.sub.x Ta.sub.y Ce.sub.1-x-y O.sub.2 where x is about 0.0 to 0.05, y is about 0.0 to 0.05, and x+y is about 0.02 to 0.05, and where x is preferably about 0.02 to 0.05 and y is 0, and a method of making the same. This novel composition is particularly applicable in forming a protective interlayer of a high temperature, solid electrolyte electrochemical cell (10), characterized by a first electrode (12); an electrically conductive interlayer (14) of niobium and/or tantalum doped cerium oxide deposited over at least a first portion (R) of the first electrode; an interconnect (16) deposited over the interlayer; a solid electrolyte (18) deposited over a second portion of the first electrode, the first portion being discontinuous from the second portion; and, a second electrode (20) deposited over the solid electrolyte. The interlayer (14) is characterized as being porous and selected from the group consisting of niobium doped cerium oxide, tantalum doped cerium oxide, and niobium and tantalum doped cerium oxide or admixtures of the same. The first electrode (12), an air electrode, is a porous layer of doped lanthanum manganite, the solid electrolyte layer (18) is a dense yttria stabilized zirconium oxide, the interconnect layer (16) is a dense, doped lanthanum chromite, and the second electrode (20), a fuel electrode, is a porous layer of nickel-zirconium oxide cermet. The electrochemical cell (10) can take on a plurality of shapes such as annular, planar, etc. and can be connected to a plurality of electrochemical cells in series and/or in parallel to generate electrical energy.

Silicon Nanostructures, Excitonic Interactions, Laser Consequences

DTIC Science & Technology

2008-07-11

etching using an anodized aluminum oxide membrane as mask. The results described here lay a solid foundation for the next phase of development aimed at...achieved though reactive-ion-etching using an anodized aluminum oxide membrane as mask. The results described here lay a solid foundation for the next...Materials, April 4, 2006 issue). 6. Aijun Yin, Marian Tzolov, David Cardimona and Jimmy Xu, "Fabrication of Highly Ordered Anodic Aluminum Oxide

Effect of proton-conduction in electrolyte on electric efficiency of multi-stage solid oxide fuel cells

PubMed Central

Matsuzaki, Yoshio; Tachikawa, Yuya; Somekawa, Takaaki; Hatae, Toru; Matsumoto, Hiroshige; Taniguchi, Shunsuke; Sasaki, Kazunari

2015-01-01

Solid oxide fuel cells (SOFCs) are promising electrochemical devices that enable the highest fuel-to-electricity conversion efficiencies under high operating temperatures. The concept of multi-stage electrochemical oxidation using SOFCs has been proposed and studied over the past several decades for further improving the electrical efficiency. However, the improvement is limited by fuel dilution downstream of the fuel flow. Therefore, evolved technologies are required to achieve considerably higher electrical efficiencies. Here we present an innovative concept for a critically-high fuel-to-electricity conversion efficiency of up to 85% based on the lower heating value (LHV), in which a high-temperature multi-stage electrochemical oxidation is combined with a proton-conducting solid electrolyte. Switching a solid electrolyte material from a conventional oxide-ion conducting material to a proton-conducting material under the high-temperature multi-stage electrochemical oxidation mechanism has proven to be highly advantageous for the electrical efficiency. The DC efficiency of 85% (LHV) corresponds to a net AC efficiency of approximately 76% (LHV), where the net AC efficiency refers to the transmission-end AC efficiency. This evolved concept will yield a considerably higher efficiency with a much smaller generation capacity than the state-of-the-art several tens-of-MW-class most advanced combined cycle (MACC). PMID:26218470

Effect of proton-conduction in electrolyte on electric efficiency of multi-stage solid oxide fuel cells.

PubMed

Matsuzaki, Yoshio; Tachikawa, Yuya; Somekawa, Takaaki; Hatae, Toru; Matsumoto, Hiroshige; Taniguchi, Shunsuke; Sasaki, Kazunari

2015-07-28

Solid oxide fuel cells (SOFCs) are promising electrochemical devices that enable the highest fuel-to-electricity conversion efficiencies under high operating temperatures. The concept of multi-stage electrochemical oxidation using SOFCs has been proposed and studied over the past several decades for further improving the electrical efficiency. However, the improvement is limited by fuel dilution downstream of the fuel flow. Therefore, evolved technologies are required to achieve considerably higher electrical efficiencies. Here we present an innovative concept for a critically-high fuel-to-electricity conversion efficiency of up to 85% based on the lower heating value (LHV), in which a high-temperature multi-stage electrochemical oxidation is combined with a proton-conducting solid electrolyte. Switching a solid electrolyte material from a conventional oxide-ion conducting material to a proton-conducting material under the high-temperature multi-stage electrochemical oxidation mechanism has proven to be highly advantageous for the electrical efficiency. The DC efficiency of 85% (LHV) corresponds to a net AC efficiency of approximately 76% (LHV), where the net AC efficiency refers to the transmission-end AC efficiency. This evolved concept will yield a considerably higher efficiency with a much smaller generation capacity than the state-of-the-art several tens-of-MW-class most advanced combined cycle (MACC).

Stack configurations for tubular solid oxide fuel cells

DOEpatents

Armstrong, Timothy R.; Trammell, Michael P.; Marasco, Joseph A.

2010-08-31

A fuel cell unit includes an array of solid oxide fuel cell tubes having porous metallic exterior surfaces, interior fuel cell layers, and interior surfaces, each of the tubes having at least one open end; and, at least one header in operable communication with the array of solid oxide fuel cell tubes for directing a first reactive gas into contact with the porous metallic exterior surfaces and for directing a second reactive gas into contact with the interior surfaces, the header further including at least one busbar disposed in electrical contact with at least one surface selected from the group consisting of the porous metallic exterior surfaces and the interior surfaces.

Communication—Electrolysis at High Efficiency with Remarkable Hydrogen Production Rates

DOE PAGES

Wood, Anthony; He, Hongpeng; Joia, Tahir; ...

2016-01-20

Solid Oxide Electrolysis (SOE) can be used to produce hydrogen with very high efficiencies at remarkable hydrogen production rates. Through microstructural and compositional modification, conventional low cost Solid Oxide Fuel Cell (SOFC) materials have been used to create a Solid Oxide Electrolysis Cell (SOEC) that can achieve remarkable current density at cell voltages allowing higher conversion efficiency than current commercial electrolysers. Current densities in excess of 6 A/cm2 have been achieved at 800°C with a cell voltage of < 1.67 V. This cell shows a more than 3-fold increase in hydrogen production rate at higher efficiency than established commercial electrolysers.

Solid polymer electrolyte composite membrane comprising a porous support and a solid polymer electrolyte including a dispersed reduced noble metal or noble metal oxide

DOEpatents

Liu, Han; Mittelsteadt, Cortney K; Norman, Timothy J; Griffith, Arthur E; LaConti, Anthony B

2015-02-24

A solid polymer electrolyte composite membrane and method of manufacturing the same. According to one embodiment, the composite membrane comprises a thin, rigid, dimensionally-stable, non-electrically-conducting support, the support having a plurality of cylindrical, straight-through pores extending perpendicularly between opposing top and bottom surfaces of the support. The pores are unevenly distributed, with some or no pores located along the periphery and more pores located centrally. The pores are completely filled with a solid polymer electrolyte, the solid polymer electrolyte including a dispersed reduced noble metal or noble metal oxide. The solid polymer electrolyte may also be deposited over the top and/or bottom surfaces of the support.

How to use the nominal group and Delphi techniques.

PubMed

McMillan, Sara S; King, Michelle; Tully, Mary P

2016-06-01

Introduction The Nominal Group Technique (NGT) and Delphi Technique are consensus methods used in research that is directed at problem-solving, idea-generation, or determining priorities. While consensus methods are commonly used in health services literature, few studies in pharmacy practice use these methods. This paper provides an overview of the NGT and Delphi technique, including the steps involved and the types of research questions best suited to each method, with examples from the pharmacy literature. Methodology The NGT entails face-to-face discussion in small groups, and provides a prompt result for researchers. The classic NGT involves four key stages: silent generation, round robin, clarification and voting (ranking). Variations have occurred in relation to generating ideas, and how 'consensus' is obtained from participants. The Delphi technique uses a multistage self-completed questionnaire with individual feedback, to determine consensus from a larger group of 'experts.' Questionnaires have been mailed, or more recently, e-mailed to participants. When to use The NGT has been used to explore consumer and stakeholder views, while the Delphi technique is commonly used to develop guidelines with health professionals. Method choice is influenced by various factors, including the research question, the perception of consensus required, and associated practicalities such as time and geography. Limitations The NGT requires participants to personally attend a meeting. This may prove difficult to organise and geography may limit attendance. The Delphi technique can take weeks or months to conclude, especially if multiple rounds are required, and may be complex for lay people to complete.

Oxidation of Haynes 230 alloy in reduced temperature solid oxide fuel cell environments

NASA Astrophysics Data System (ADS)

Jian, Li; Jian, Pu; Jianzhong, Xiao; Xiaoliang, Qian

Haynes 230 alloy was exposed to reducing and oxidizing environments at 750 °C for 1000 h, simulating the conditions in a reduced temperature solid oxide fuel cell (SOFC). The oxidized specimens were characterized in terms of the oxide morphology, composition and crystal structure. The oxide scale in each environment was identified as Cr 2O 3 with the existence of Cr 2MnO 4. Ni remained metallic in the reducing atmosphere, and NiO was detected in the sample exposed to air. The oxide scale is around 1 μm thick after 1000 h of oxidation in both situations. The area specific resistance (ASR) contributed by the oxide scale is expected less than 0.1 Ω cm 2 after 40,000 h of exposure when a parabolic oxide growth rate is assumed, demonstrating the suitability of the interconnect application of this alloy in the reduced temperature SOFCs.

PA Discussion Topics

DTIC Science & Technology

2011-02-04

Solid Oxide fuel cell and Lithium Ion battery (~150 watts) • Enables extended mission durations • 12 hours of full power; 30 hours of silent watch...Hybrid fuel cell system is designed to replace the existing lead-acid batteries with an upgraded Solid Oxide fuel cell and Lithium Ion battery (~250

Reduction in the Band Gap of Manganese-Doped Zinc Oxide: Role of the Oxidation State

NASA Astrophysics Data System (ADS)

Sharma, Sonia; Ramesh, Pranith; Swaminathan, P.

2015-12-01

Manganese-doped zinc oxide powders were synthesized by solid state reaction of the respective oxides. The high-temperature conditions were chosen such that multiple valence states of manganese were doped in the host zinc oxide lattice. Structural characterization was carried out to confirm the doping and to find the maximum amount of manganese that can be incorporated. Diffuse reflectance spectroscopy was used to measure the optical band gap of the doped sample and the lowering with respect to pure ZnO was attributed to the presence of higher oxidation states of manganese. The presence of these oxidation states was confirmed using x-ray photoelectron spectroscopy. The study shows that a solid state reaction is a viable route for synthesizing doped metal oxides with desired optical properties.

Modified cermet fuel electrodes for solid oxide electrochemical cells

DOEpatents

Ruka, Roswell J.; Spengler, Charles J.

1991-01-01

An exterior porous electrode (10), bonded to a solid oxygen ion conducting electrolyte (13) which is in contact with an interior electrode (14), contains coarse metal particles (12) of nickel and/or cobalt, having diameters from 3 micrometers to 35 micrometers, where the coarse particles are coated with a separate, porous, multiphase layer (17) containing fine metal particles of nickel and/or cobalt (18), having diameters from 0.05 micrometers to 1.75 micrometers and conductive oxide (19) selected from cerium oxide, doped cerium oxide, strontium titanate, doped strontium titanate and mixtures thereof.

Defining a Bobath clinical framework - A modified e-Delphi study.

PubMed

Vaughan-Graham, Julie; Cott, Cheryl

2016-11-01

To gain consensus within the expert International Bobath Instructors Training Association (IBITA) on a Bobath clinical framework on which future efficacy studies can be based. A three-round modified e-Delphi approach was used with 204 full members of the IBITA. Twenty-one initial statements were generated from the literature. Consensus was defined a priori as at least 80% of the respondents with a level of agreement on a Likert scale of 4 or 5. The Delphi questionnaire for each round was available online for two weeks. Summary reports and subsequent questionnaires were posted within four weeks. Ninety-four IBITA members responded, forming the Delphi panel, of which 68 and 66 responded to Rounds Two and Three, respectively. The 21 initial statements were revised to 17 statements and five new statements in Round Two in which eight statements were accepted and two statements were eliminated. Round Three presented 12 revised statements, all reaching consensus. The Delphi was successful in gaining consensus on a Bobath clinical framework in a geographically diverse expert association, identifying the unique components of Bobath clinical practice. Discussion throughout all three Rounds revolved primarily around the terminology of atypical and compensatory motor behavior and balance.

Polypyrrole-polyoxometalate/reduced graphene oxide ternary nanohybrids for flexible, all-solid-state supercapacitors.

PubMed

Chen, Yuyun; Han, Min; Tang, Yujia; Bao, Jianchun; Li, Shunli; Lan, Yaqian; Dai, Zhihui

2015-08-11

Novel polypyrrole-polyoxometalate/reduced graphene oxide ternary nanohybrids (TNHs) are synthesized via a one-pot redox relay strategy. The TNHs exhibit high areal specific capacitance (2.61 mF cm(-2)), and the fabricated solid device also exhibits good rate capability, excellent flexibility and mechanical stability.

Chemical compositions, methods of making the chemical compositions, and structures made from the chemical compositions

DOEpatents

Yang, Lei; Cheng, Zhe; Liu, Ze; Liu, Meilin

2015-01-13

Embodiments of the present disclosure include chemical compositions, structures, anodes, cathodes, electrolytes for solid oxide fuel cells, solid oxide fuel cells, fuel cells, fuel cell membranes, separation membranes, catalytic membranes, sensors, coatings for electrolytes, electrodes, membranes, and catalysts, and the like, are disclosed.

Metal current collect protected by oxide film

DOEpatents

Jacobson, Craig P.; Visco, Steven J.; DeJonghe, Lutgard C.

2004-05-25

Provided are low-cost, mechanically strong, highly electronically conductive current collects and associated structures for solid-state electrochemical devices, techniques for forming these structures, and devices incorporating the structures. The invention provides solid state electrochemical devices having as current interconnects a ferritic steel felt or screen coated with a protective oxide film.

Method of fabricating a monolithic solid oxide fuel cell

DOEpatents

Minh, N.Q.; Horne, C.R.

1994-03-01

In a two-step densifying process of making a monolithic solid oxide fuel cell, a limited number of anode-electrolyte-cathode cells separated by an interconnect layer are formed and partially densified. Subsequently, the partially densified cells are stacked and further densified to form a monolithic array. 10 figures.

Method of fabricating a monolithic solid oxide fuel cell

DOEpatents

Minh, Nguyen Q.; Horne, Craig R.

1994-01-01

In a two-step densifying process of making a monolithic solid oxide fuel cell, a limited number of anode-electrolyte-cathode cells separated by an interconnect layer are formed and partially densified. Subsequently, the partially densified cells are stacked and further densified to form a monolithic array.

Study of low-temperature active rare-earth oxide catalysts for automotive exhaust clean-up.

DOT National Transportation Integrated Search

2014-02-01

We report a facile onepot synthesis of CexZr1-xO2 (0x1) solid solution nanocrystals using hydrothermal reactions. A direct formation of oxide solid solutions in aqueous solution under pressure at low temperatures was clearly revealed by X-ra...

Analysis of the Hazardous Material Reutilization Facilities at SUBASE Bangor and NS San Diego

DTIC Science & Technology

1990-12-01

soprene * styrene methyl acrylate methyl methacrylate *turpentine? varnish 9 GROUP IV: OXIDES AND PEROXIDE -rORKING COMPOUNDS a) Gases b) Liquids...lead fluorine GROUP XV: POISON a GROUP XVI: OXIDIZERS .a) Solid a) Solid phosphorus red ammonium nitrate phosphorus white/, ammonium perchlorate yellow

In operando spectroscopic studies of high temperature electrocatalysts used for energy conversion

NASA Astrophysics Data System (ADS)

McIntyre, Melissa Dawn

Solid-state electrochemical cells are efficient energy conversion devices that can be used for clean energy production or for removing air pollutants from exhaust gas emitted by combustion processes. For example, solid oxide fuel cells generate electricity with low emissions from a variety of fuel sources; solid oxide electrolysis cells produce zero-emission H2 fuel; and solid-state DeNOx cells remove NOx gases from diesel exhaust. In order to maintain high conversion efficiencies, these systems typically operate at temperatures ≥ 500°C. The high operating temperatures, however, accelerate chemical and mechanical cell degradation. To improve device durability, a mechanistic understanding of the surface chemistry occurring at the cell electrodes (anode and cathode) is critical in terms of refining cell design, material selection and operation protocols. The studies presented herein utilized in operando Raman spectroscopy coupled with electrochemical measurements to directly correlate molecular/material changes with device performance in solid oxide cells under various operating conditions. Because excessive carbon accumulation with carbon-based fuels destroys anodes, the first three studies investigated strategies for mitigating carbon accumulation on Ni cermet anodes. Results from the first two studies showed that low amounts of solid carbon stabilized the electrical output and improved performance of solid oxide fuel cells operating with syn-gas (H 2/CO fuel mixture). The third study revealed that infiltrating anodes with Sn or BaO suppressed carbon accumulation with CH4 fuel and that H2O was the most effective reforming agent facilitating carbon removal. The last two studies explored how secondary phases formed in traditional solid oxide cell materials doped with metal oxides improve electrochemical performance. Results from the fourth study suggest that the mixed ion-electron conducting Zr5Ti7O24 secondary phase can expand the electrochemically active region and increase electrochemical activity in cermet electrodes. The final study of lanthanum strontium manganite cathodes infiltrated with BaO revealed the reversible decomposition/formation of a Ba3Mn2O8 secondary phase under applied potentials and proposed mechanisms for the enhanced electrocatalytic oxygen reduction associated with this compound under polarizing conditions. Collectively, these studies demonstrate that mechanistic information obtained from molecular/material specific techniques coupled with electrochemical measurements can be used to help optimize materials and operating conditions in solid-state electrochemical cells.

CoxFe1-x oxide coatings on metallic interconnects for solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Shen, Fengyu; Lu, Kathy

2016-10-01

In order to improve the performance of Cr-containing steel as an interconnect material for solid oxide fuel cells, CoFe alloy coatings with Co:Fe ratios of 9:1, 8:2, 7:3, 6:4, and 5:5 are deposited by electrodeposition and then oxidized to CoxFe1-x oxide coatings with a thickness of ∼6 μm as protective layers on the interconnect. The area specific resistance of the coated interconnect increases with the Fe content. Higher Co content oxide coatings are more effective in limiting the growth of the chromia scale while all coatings are effective in inhibiting Cr diffusion and evaporation. With the Co0.8Fe0.2 oxide coated interconnect, the electrochemical performance of the Sm0.5Sr0.5Co0.2Fe0.8O3 cathode is improved. Only 1.54 atomic percentage of Cr is detected on the surface of the Sm0.5Sr0.5Co0.2Fe0.8O3 cathode while no Cr is detected 0.66 μm or more into the cathode. CoxFe1-x oxide coatings are promising candidates for solid oxide fuel cell interconnects with the advantage of using existing cathode species for compatibility and performance enhancement.

Development of a household waste treatment subsystem, volume 1. [with water conservation features

NASA Technical Reports Server (NTRS)

Gresko, T. M.; Murray, R. W.

1973-01-01

The domestic waste treatment subsystem was developed to process the daily liquid and non-metallic solid wastes provided by a family of four people. The subsystem was designed to be connected to the sewer line of a household which contained water conservation features. The system consisted of an evaporation technique to separate liquids from solids, an incineration technique for solids reduction, and a catalytic oxidizer for eliminating noxious gases from evaporation and incineration processes. All wastes were passed through a grinder which masticated the solids and deposited them in a settling tank. The liquids were transferred through a cleanable filter into a holding tank. From here the liquids were sprayed into an evaporator and a spray chamber where evaporation occurred. The resulting vapors were processed by catalytic oxidation. Water and latent energy were recovered in a combination evaporator/condenser heat exchanger. The solids were conveyed into an incinerator and reduced to ash while the incineration gases were passed through the catalytic oxidizer along with the processed water vapor.

Sintered Cathodes for All-Solid-State Structural Lithium-Ion Batteries

NASA Technical Reports Server (NTRS)

Huddleston, William; Dynys, Frederick; Sehirlioglu, Alp

2017-01-01

All-solid-state structural lithium ion batteries serve as both structural load-bearing components and as electrical energy storage devices to achieve system level weight savings in aerospace and other transportation applications. This multifunctional design goal is critical for the realization of next generation hybrid or all-electric propulsion systems. Additionally, transitioning to solid state technology improves upon battery safety from previous volatile architectures. This research established baseline solid state processing conditions and performance benchmarks for intercalation-type layered oxide materials for multifunctional application. Under consideration were lithium cobalt oxide and lithium nickel manganese cobalt oxide. Pertinent characteristics such as electrical conductivity, strength, chemical stability, and microstructure were characterized for future application in all-solid-state structural battery cathodes. The study includes characterization by XRD, ICP, SEM, ring-on-ring mechanical testing, and electrical impedance spectroscopy to elucidate optimal processing parameters, material characteristics, and multifunctional performance benchmarks. These findings provide initial conditions for implementing existing cathode materials in load bearing applications.

Multidisciplinary Delphi Development of a Scale to Evaluate Team Function in Obstetric Emergencies: The PETRA Scale.

PubMed

Balki, Mrinalini; Hoppe, David; Monks, David; Cooke, Mary Ellen; Sharples, Lynn; Windrim, Rory

2017-06-01

The objective of this study was to develop a new interdisciplinary teamwork scale, the Perinatal Emergency: Team Response Assessment (PETRA), for the management of obstetric crises, through consensus agreement of obstetric caregivers. This prospective study was performed using expert consensus, based on a Delphi method. The study investigators developed a new PETRA tool, specifically related to obstetric crisis management, based on the existing literature and discussions among themselves. The scale was distributed to a selected panel of experts in the field for the Delphi process. After each round of Delphi, every component of the scale was analyzed quantitatively by the percentage of agreement ratings and each comment reviewed by the blinded investigators. The assessment scale was then modified, with components of less than 80% agreement removed from the scale. The process was repeated on three occasions to reach a consensus and final PETRA scale. Fourteen of 24 invited experts participated in the Delphi process. The original PETRA scale included six categories and 48 items, one global scale item, and a 3-point rubric for rating. The overall percentage agreement by experts in the first, second, and third rounds was 95.0%, 93.2%, and 98.5%, respectively. The final scale after the third round of Delphi consisted of the following seven categories: shared mental model, communication, situational awareness, leadership, followership, workload management, and positive/effective behaviours and attitudes. There were 34 individual items within these categories, each with a 5-point rating rubric (1 = unacceptable to 5 = perfect). Using a structured Delphi method, we established the face and content validity of this assessment scale that focuses on important aspects of interdisciplinary teamwork in the management of obstetric crises. Copyright © 2017 The Society of Obstetricians and Gynaecologists of Canada/La Société des obstétriciens et gynécologues du Canada. Published by Elsevier Inc. All rights reserved.

Feasibility of multi-sector policy measures that create activity-friendly environments for children: results of a Delphi study.

PubMed

Aarts, Marie-Jeanne; Schuit, Albertine J; van de Goor, Ien Am; van Oers, Hans Am

2011-12-15

Although multi-sector policy is a promising strategy to create environments that stimulate physical activity among children, little is known about the feasibility of such a multi-sector policy approach. The aims of this study were: to identify a set of tangible (multi-sector) policy measures at the local level that address environmental characteristics related to physical activity among children; and to assess the feasibility of these measures, as perceived by local policy makers. In four Dutch municipalities, a Delphi study was conducted among local policy makers of different policy sectors (public health, sports, youth and education, spatial planning/public space, traffic and transportation, and safety). In the first Delphi round, respondents generated a list of possible policy measures addressing three environmental correlates of physical activity among children (social cohesion, accessibility of facilities, and traffic safety). In the second Delphi round, policy makers weighted different feasibility aspects (political feasibility, cultural/community acceptability, technical feasibility, cost feasibility, and legal feasibility) and assessed the feasibility of the policy measures derived from the first round. The third Delphi round was aimed at reaching consensus by feedback of group results. Finally, one overall feasibility score was calculated for each policy measure. Cultural/community acceptability, political feasibility, and cost feasibility were considered most important feasibility aspects. The Delphi studies yielded 16 feasible policy measures aimed at physical and social environmental correlates of physical activity among children. Less drastic policy measures were considered more feasible, whereas environmental policy measures were considered less feasible. This study showed that the Delphi technique can be a useful tool in reaching consensus about feasible multi-sector policy measures. The study yielded several feasible policy measures aimed at physical and social environmental correlates of physical activity among children and can assist local policy makers in designing multi-sector policies aimed at an activity-friendly environment for children.

Effect of Antifoam Agent on Oxidative Leaching of Hanford Tank Sludge Simulants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapko, Brian M.; Jones, Susan A.; Lumetta, Gregg J.

2010-02-26

Oxidative leaching of simulant tank waste containing an antifoam agent (AFA) to reduce the chromium content of the sludge was tested using permanganate as the oxidant in 0.25 M NaOH solutions. AFA is added to the waste treatment process to prevent foaming. The AFA, Dow Corning Q2-3183A, is a surface-active polymer that consists of polypropylene glycol, polydimethylsiloxane, octylphenoxy polyethoxy ethanol, treated silica, and polyether polyol. Some of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste slurries contain high concentrations of undissolved solids that would exhibit undesirable behavior without AFA addition. These tests were conducted to determine the effectmore » of the AFA on oxidative leaching of Cr(III) in waste by permanganate. It has not previously been determined what effect AFA has on the permanganate reaction. This study was conducted to determine the effect AFA has on the oxidation of the chromium, plus plutonium and other criticality-related elements, specifically Fe, Ni and Mn. During the oxidative leaching process, Mn is added as liquid permanganate solution and is converted to an insoluble solid that precipitates as MnO2 and becomes part of the solid waste. Caustic leaching was performed followed by an oxidative leach at either 25°C or 45°C. Samples of the leachate and solids were collected at each step of the process. Initially, Battelle-Pacific Northwest Division (PNWD) was contracted by Bechtel National, Inc. to perform these further scoping studies on oxidative alkaline leaching. The data obtained from the testing will be used by the WTP operations to develop procedures for permanganate dosing of Hanford tank sludge solids during oxidative leaching. Work was initially conducted under contract number 24590-101-TSA-W000-00004. In February 2007, the contract mechanism was switched to Pacific Northwest National Laboratory (PNNL) operating Contract DE-AC05-76RL01830. In summary, this report describes work focused on determining the effect of AFA on chromium oxidation by permanganate with Hanford sludge simulant.« less

Complete oxidation of solid phase sulfides by manganese and bacteria in anoxic marine sediments

NASA Astrophysics Data System (ADS)

Aller, Robert C.; Rude, Peter D.

1988-03-01

During the physical or biological reworking of surficial marine sediments, metal oxides are often brought into contact with both solid and dissolved sulfides. Experiments simulating these mixing processes demonstrate that in natural sediments Mn-oxides can completely oxidize solid phase sulfides to SO 4- under anoxic conditions. The major source of sulfur is probably acid volatile sulfide. Minerals containing Mn +4 are apparently more effective than Mn +3 in driving the oxidation. There is slight or no evidence for complete sulfide oxidation by Fe-oxides under similar conditions. The reaction is inhibited by DNP (dinitrophenol) and azide, implying biological mediation by a group of chemolithotrophic bacteria such as the thiobacilli, having a well-organized cytochrome system, oxidative phosphorylation coupled with sulfide oxidation, and possibly aulolrophic CO 2 fixation. Lack of sensitivity to chlorate suggests that a No 3- reductase complex is not involved. Because of metal reduction and the overall stoichiometry of reaction, this sulfide oxidation causes a rise in pH in contrast to oxidation by O 2. Alkalinity is also simultaneously depeleted by Mn, Ca carbonate precipitation. Both manganoan kutnahorite and manganoan calcite are observed to form rapidly (days) during Mn reduction. The oxidation of sulfides by Mn-oxides is likely to be important, but highly variable, in organic-rich shelf sediments and environments such as hydrothermal vents where sulfidic plumes contact oxidized metals. A substantial Proportion of sedimentary sulfide may be oxidized and Mn reduced by this pathway, particularly in bioturbated sediments. The relative roles of lithotrophic (S) and heterotrophic (C) Mn-reduction in marine sediments are presently unknown.

Oxygen scrubbing and sensing in plant growth chambers using solid oxide electrolyzers

NASA Technical Reports Server (NTRS)

Sridhar, K. R.; MacElroy, Robert D.

1997-01-01

The maintenance of optimal levels of oxygen in the gaseous environment of a plant growth chamber during light and dark periods is an essential criterion for the correct growth of plants. The use of solid oxide electrolyzers to control the oxygen levels by removing the excess gaseous oxygen during periods of illumination and full-scale photosynthesis is described. A part of the oxygen removed can be stored and supplied back to the plants during dark periods. The excess oxygen can be used by the crew. The electrolizer can be additionally used in its open circuit mode, to sense the oxygen concentrations in the plant chamber. The solid oxide electrolysis process is described.

Tubular solid oxide fuel cells with porous metal supports and ceramic interconnections

DOEpatents

Huang, Kevin [Export, PA; Ruka, Roswell J [Pittsburgh, PA

2012-05-08

An intermediate temperature solid oxide fuel cell structure capable of operating at from 600.degree. C. to 800.degree. C. having a very thin porous hollow elongated metallic support tube having a thickness from 0.10 mm to 1.0 mm, preferably 0.10 mm to 0.35 mm, a porosity of from 25 vol. % to 50 vol. % and a tensile strength from 700 GPa to 900 GPa, which metallic tube supports a reduced thickness air electrode having a thickness from 0.010 mm to 0.2 mm, a solid oxide electrolyte, a cermet fuel electrode, a ceramic interconnection and an electrically conductive cell to cell contact layer.

Tuneable diode laser gas analyser for methane measurements on a large scale solid oxide fuel cell

NASA Astrophysics Data System (ADS)

Lengden, Michael; Cunningham, Robert; Johnstone, Walter

2011-10-01

A new in-line, real time gas analyser is described that uses tuneable diode laser spectroscopy (TDLS) for the measurement of methane in solid oxide fuel cells. The sensor has been tested on an operating solid oxide fuel cell (SOFC) in order to prove the fast response and accuracy of the technology as compared to a gas chromatograph. The advantages of using a TDLS system for process control in a large-scale, distributed power SOFC unit are described. In future work, the addition of new laser sources and wavelength modulation will allow the simultaneous measurement of methane, water vapour, carbon-dioxide and carbon-monoxide concentrations.

Solid oxide fuel cell power plant with an anode recycle loop turbocharger

DOEpatents

Saito, Kazuo; Skiba, Tommy; Patel, Kirtikumar H.

2015-07-14

An anode exhaust recycle turbocharger (100) has a turbocharger turbine (102) secured in fluid communication with a compressed oxidant stream within an oxidant inlet line (218) downstream from a compressed oxidant supply (104), and the anode exhaust recycle turbocharger (100) also includes a turbocharger compressor (106) mechanically linked to the turbocharger turbine (102) and secured in fluid communication with a flow of anode exhaust passing through an anode exhaust recycle loop (238) of the solid oxide fuel cell power plant (200). All or a portion of compressed oxidant within an oxidant inlet line (218) drives the turbocharger turbine (102) to thereby compress the anode exhaust stream in the recycle loop (238). A high-temperature, automotive-type turbocharger (100) replaces a recycle loop blower-compressor (52).

Solid oxide fuel cell power plant with an anode recycle loop turbocharger

DOEpatents

Saito, Kazuo; Skiba, Tommy; Patel, Kirtikumar H.

2016-09-27

An anode exhaust recycle turbocharger (100) has a turbocharger turbine (102) secured in fluid communication with a compressed oxidant stream within an oxidant inlet line (218) downstream from a compressed oxidant supply (104), and the anode exhaust recycle turbocharger (100) also includes a turbocharger compressor (106) mechanically linked to the turbocharger turbine (102) and secured in fluid communication with a flow of anode exhaust passing through an anode exhaust recycle loop (238) of the solid oxide fuel cell power plant (200). All or a portion of compressed oxidant within an oxidant inlet line (218) drives the turbocharger turbine (102) to thereby compress the anode exhaust stream in the recycle loop (238). A high-temperature, automotive-type turbocharger (100) replaces a recycle loop blower-compressor (52).

Curriculum development for a national cardiotocography education program: a Delphi survey to obtain consensus on learning objectives.

PubMed

Thellesen, Line; Hedegaard, Morten; Bergholt, Thomas; Colov, Nina P; Hoegh, Stinne; Sorensen, Jette L

2015-08-01

To define learning objectives for a national cardiotocography (CTG) education program based on expert consensus. A three-round Delphi survey. One midwife and one obstetrician from each maternity unit in Denmark were appointed based on CTG teaching experience and clinical obstetric experience. Following national and international guidelines, the research group determined six topics as important when using CTG: fetal physiology, equipment, indication, interpretation, clinical management, and communication/responsibility. In the first Delphi round, participants listed one to five learning objectives within the predefined topics. Responses were analyzed by a directed approach to content analysis. Phrasing was modified in accordance with Bloom's taxonomy. In the second and third Delphi rounds, participants rated each objective on a five-point relevance scale. Consensus was predefined as objectives with a mean rating value of ≥ 3. A prioritized list of CTG learning objectives. A total of 42 midwives and obstetricians from 21 maternity units were invited to participate, of whom 26 completed all three Delphi rounds, representing 18 maternity units. The final prioritized list included 40 objectives. The highest ranked objectives emphasized CTG interpretation and clinical management. The lowest ranked objectives emphasized fetal physiology. Mean ratings of relevance ranged from 3.15 to 5.00. National consensus on CTG learning objectives was achieved using the Delphi methodology. This was an initial step in developing a valid CTG education program. A prioritized list of objectives will clarify which topics to emphasize in a CTG education program. © 2015 Nordic Federation of Societies of Obstetrics and Gynecology.

Determining content for a simulation-based curriculum in pediatric emergency medicine: results from a national Delphi process.

PubMed

Bank, Ilana; Cheng, Adam; McLeod, Peter; Bhanji, Farhan

2015-11-01

By the end of residency training, pediatric emergency medicine (PEM) residents are expected to have developed the confidence and abilities required to manage acutely ill children. Acquisition of competence requires exposure and/or supplemental formal education for critical and noncritical medical clinical presentations. Simulation can provide experiential learning and can improve trainees' knowledge, skills, and attitudes. The primary objective of this project was to identify the content for a simulation-based national curriculum for PEM training. We recruited participants for the Delphi study by contacting current PEM program directors and immediate past program directors as well as simulation experts at all of the Canadian PEM fellowship sites. We determined the appropriate core content for the Delphi study by combining the PEM core content requirements of the Royal College of Physicians and Surgeons of Canada (RCPSC) and the American Board of Pediatrics (ABP). Using the Delphi method, we achieved consensus amongst the national group of PEM and simulation experts. The participants completed a three-round Delphi (using a four-point Likert scale). Response rates for the Delphi were 85% for the first round and 77% for second and third rounds. From the initial 224 topics, 53 were eliminated (scored <2). Eighty-five topics scored between 2 and 3, and 87 scored between 3 and 4. The 48 topics, which were scored between 3.5 and 4.0, were labeled as "key curriculum topics." We have iteratively identified a consensus for the content of a national simulation-based curriculum.

Intimate Partner Violence Programs in a Children's Hospital: Comprehensive Assessment Utilizing a Delphi Instrument.

PubMed

Randell, Kimberly A; Evans, Sarah E; O'Malley, Donna; Dowd, M Denise

2015-03-01

The purpose of this study was to conduct a baseline assessment of intimate partner violence (IPV) practices in a pediatric hospital system. The Delphi Instrument for Hospital-based Domestic Violence Programs was used to assess the structure and components of the hospital system's IPV practices. Through key stakeholder interviews, we also assessed IPV practices in individual patient care areas. Qualitative analysis of interview data used a grounded theory approach. The hospital scored 17 of 100 points on the Delphi instrument assessment. Key areas of weakness identified by the Delphi instrument and interviews included lack of coordinated provider training and evaluation of IPV-related processes and no standards for IPV screening, safety assessment, and documentation. Most interviewees supported addressing IPV; all identified barriers to IPV screening at individual provider and institutional levels. Institutional barriers included lack of a standardized response to IPV disclosure, need for individualized screening protocols for different patient care settings, lack of standardized provider training, concerns about overextending social work resources, and lack of resources for hospital staff experiencing vicarious trauma. Individual barriers included concern that screening may harm physician-patient-family relationships and the perception that physicians are unwilling to address psychosocial issues. The Delphi Instrument for Hospital-based Domestic Violence Programs identified weaknesses and key areas for improvement in IPV practices. Deficiencies revealed by the Delphi instrument were affirmed by individual interview results. Institutional and individual provider level barriers must be addressed to optimize IPV practices in a pediatric hospital system. Copyright © 2015 by the American Academy of Pediatrics.

Conversion of organic solids to hydrocarbons

DOEpatents

Greenbaum, E.

1995-05-23

A method of converting organic solids to liquid and gaseous hydrocarbons includes impregnating an organic solid with photosensitizing ions and exposing the impregnated solid to light in a non-oxidizing atmosphere for a time sufficient to photocatalytically reduce the solid to at least one of a liquid and a gaseous hydrocarbon. 5 Figs.

Conversion of organic solids to hydrocarbons

DOEpatents

Greenbaum, Elias

1995-01-01

A method of converting organic solids to liquid and gaseous hydrocarbons includes impregnating an organic solid with photosensitizing ions and exposing the impregnated solid to light in a non-oxidizing atmosphere for a time sufficient to photocatalytically reduce the solid to at least one of a liquid and a gaseous hydrocarbon.

Electrochemical catalyst recovery method

DOEpatents

Silva, L.J.; Bray, L.A.

1995-05-30

A method of recovering catalyst material from latent catalyst material solids includes: (a) combining latent catalyst material solids with a liquid acid anolyte solution and a redox material which is soluble in the acid anolyte solution to form a mixture; (b) electrochemically oxidizing the redox material within the mixture into a dissolved oxidant, the oxidant having a potential for oxidation which is effectively higher than that of the latent catalyst material; (c) reacting the oxidant with the latent catalyst material to oxidize the latent catalyst material into at least one oxidized catalyst species which is soluble within the mixture and to reduce the oxidant back into dissolved redox material; and (d) recovering catalyst material from the oxidized catalyst species of the mixture. The invention is expected to be particularly useful in recovering spent catalyst material from petroleum hydroprocessing reaction waste products having adhered sulfides, carbon, hydrocarbons, and undesired metals, and as well as in other industrial applications. 3 figs.

Electrochemical catalyst recovery method

DOEpatents

Silva, Laura J.; Bray, Lane A.

1995-01-01

A method of recovering catalyst material from latent catalyst material solids includes: a) combining latent catalyst material solids with a liquid acid anolyte solution and a redox material which is soluble in the acid anolyte solution to form a mixture; b) electrochemically oxidizing the redox material within the mixture into a dissolved oxidant, the oxidant having a potential for oxidation which is effectively higher than that of the latent catalyst material; c) reacting the oxidant with the latent catalyst material to oxidize the latent catalyst material into at least one oxidized catalyst species which is soluble within the mixture and to reduce the oxidant back into dissolved redox material; and d) recovering catalyst material from the oxidized catalyst species of the mixture. The invention is expected to be particularly useful in recovering spent catalyst material from petroleum hydroprocessing reaction waste products having adhered sulfides, carbon, hydrocarbons, and undesired metals, and as well as in other industrial applications.

Biomass torrefaction characteristics in inert and oxidative atmospheres at various superficial velocities.

PubMed

Chen, Wei-Hsin; Lu, Ke-Miao; Liu, Shih-Hsien; Tsai, Chi-Ming; Lee, Wen-Jhy; Lin, Ta-Chang

2013-10-01

The reaction characteristics of four biomass materials (i.e. oil palm fiber, coconut fiber, eucalyptus, and Cryptomeria japonica) with non-oxidative and oxidative torrefaction at various superficial velocities are investigated where nitrogen and air are used as carrier gases. Three torrefaction temperatures of 250, 300, and 350 °C are considered. At a given temperature, the solid yield of biomass is not affected by N2 superficial velocity, revealing that the thermal degradation is controlled by heat and mass transfer in biomass. Increasing air superficial velocity decreases the solid yield, especially in oil palm fiber and coconut fiber, implying that the torrefaction reaction of biomass is dominated by surface oxidation. There exists an upper limit of air superficial velocity in the decrement of solid yield, suggesting that beyond this limit the thermal degradation of biomass is no longer governed by surface oxidation, but rather is controlled by internal mass transport. Copyright © 2013 Elsevier Ltd. All rights reserved.

Short review of high-pressure crystal growth and magnetic and electrical properties of solid-state osmium oxides

NASA Astrophysics Data System (ADS)

Yamaura, Kazunari

2016-04-01

High-pressure crystal growth and synthesis of selected solid-state osmium oxides, many of which are perovskite-related types, are briefly reviewed, and their magnetic and electrical properties are introduced. Crystals of the osmium oxides, including NaOsO3, LiOsO3, and Na2OsO4, were successfully grown under high-pressure and high-temperature conditions at 6 GPa in the presence of an appropriate amount of flux in a belt-type apparatus. The unexpected discovery of a magnetic metal-insulator transition in NaOsO3, a ferroelectric-like transition in LiOsO3, and high-temperature ferrimagnetism driven by a local structural distortion in Ca2FeOsO6 may represent unique features of the osmium oxides. The high-pressure and high-temperature synthesis and crystal growth has played a central role in the development of solid-state osmium oxides and the elucidation of their magnetic and electronic properties toward possible use in multifunctional devices.

Process for forming a homogeneous oxide solid phase of catalytically active material

DOEpatents

Perry, Dale L.; Russo, Richard E.; Mao, Xianglei

1995-01-01

A process is disclosed for forming a homogeneous oxide solid phase reaction product of catalytically active material comprising one or more alkali metals, one or more alkaline earth metals, and one or more Group VIII transition metals. The process comprises reacting together one or more alkali metal oxides and/or salts, one or more alkaline earth metal oxides and/or salts, one or more Group VIII transition metal oxides and/or salts, capable of forming a catalytically active reaction product, in the optional presence of an additional source of oxygen, using a laser beam to ablate from a target such metal compound reactants in the form of a vapor in a deposition chamber, resulting in the deposition, on a heated substrate in the chamber, of the desired oxide phase reaction product. The resulting product may be formed in variable, but reproducible, stoichiometric ratios. The homogeneous oxide solid phase product is useful as a catalyst, and can be produced in many physical forms, including thin films, particulate forms, coatings on catalyst support structures, and coatings on structures used in reaction apparatus in which the reaction product of the invention will serve as a catalyst.

A Delphi survey to determine how educational interventions for evidence-based practice should be reported: Stage 2 of the development of a reporting guideline

PubMed Central

2014-01-01

Background Undertaking a Delphi exercise is recommended during the second stage in the development process for a reporting guideline. To continue the development for the Guideline for Reporting Evidence-based practice Educational interventions and Teaching (GREET) a Delphi survey was undertaken to determine the consensus opinion of researchers, journal editors and educators in evidence-based practice (EBP) regarding the information items that should be reported when describing an educational intervention for EBP. Methods A four round online Delphi survey was conducted from October 2012 to March 2013. The Delphi panel comprised international researchers, educators and journal editors in EBP. Commencing with an open-ended question, participants were invited to volunteer information considered important when reporting educational interventions for EBP. Over three subsequent rounds participants were invited to rate the importance of each of the Delphi items using an 11 point Likert rating scale (low 0 to 4, moderate 5 to 6, high 7 to 8 and very high >8). Consensus agreement was set a priori as at least 80 per cent participant agreement. Consensus agreement was initially calculated within the four categories of importance (low to very high), prior to these four categories being merged into two (<7 and ≥7). Descriptive statistics for each item were computed including the mean Likert scores, standard deviation (SD), range and median participant scores. Mean absolute deviation from the median (MAD-M) was also calculated as a measure of participant disagreement. Results Thirty-six experts agreed to participate and 27 (79%) participants completed all four rounds. A total of 76 information items were generated across the four survey rounds. Thirty-nine items (51%) were specific to describing the intervention (as opposed to other elements of study design) and consensus agreement was achieved for two of these items (5%). When the four rating categories were merged into two (<7 and ≥7), 18 intervention items achieved consensus agreement. Conclusion This Delphi survey has identified 39 items for describing an educational intervention for EBP. These Delphi intervention items will provide the groundwork for the subsequent consensus discussion to determine the final inclusion of items in the GREET, the first reporting guideline for educational interventions in EBP. PMID:25081371

Solid oxide fuel cell generator

DOEpatents

Di Croce, A. Michael; Draper, Robert

1993-11-02

A solid oxide fuel cell generator has a plenum containing at least two rows of spaced apart, annular, axially elongated fuel cells. An electrical conductor extending between adjacent rows of fuel cells connects the fuel cells of one row in parallel with each other and in series with the fuel cells of the adjacent row.

Design of Hybrid Solid Polymer Electrolytes: Structure and Properties

NASA Technical Reports Server (NTRS)

Bronstein, Lyudmila M.; Karlinsey, Robert L.; Ritter, Kyle; Joo, Chan Gyu; Stein, Barry; Zwanziger, Josef W.

2003-01-01

This paper reports synthesis, structure, and properties of novel hybrid solid polymer electrolytes (SPE's) consisting of organically modified aluminosilica (OM-ALSi), formed within a poly(ethylene oxide)-in-salt (Li triflate) phase. To alter the structure and properties we fused functionalized silanes containing poly(ethylene oxide) (PEO) tails or CN groups.

Program of scientific investigations and development of solid-oxide fuel cells (SOFC) in VNIITF. Proposals on scientific and technical collaboration and SOFC commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kleschev, Yu.N.; Chukharev, V.F.

1996-04-01

This paper describes proposals on scientific and technical collaborations pertaining to solid oxide fuel cell commercialization. Topics included for discussion are: materials research and manufacture; market estimation and cost; directions of collaboration; and project of proposals on joint enterprise creation.

Review of Fuel Cell Technologies for Military Land Vehicles

DTIC Science & Technology

2014-09-01

fuel cell technologies for APUs are Proton Exchange Membrane Fuel Cells ( PEMFC ), direct methanol fuel cells and Solid Oxide Fuel Cells (SOFC). The...6 4.2 Proton Exchange Membrane Fuel Cells ( PEMFC ...OEM Original Equipment Manufacturer PEM Proton Exchange Membrane PEMFC Proton Exchange Membrane Fuel Cell SOFC Solid Oxide Fuel Cell TRL Technical

Formation of Green Rust and Immobilization of Nickel in Response to Bacterial Reduction of Hydrous Ferric Oxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parmar, N.; Gorby, Yuri A.; Beveridge, Terrance J.

This investigation documents the formation of Green Rust (GR) and immobilization of Ni2+ in response to bacterial reduction of hydrous ferric oxide (HFO) reduction experiments provided evidence that the solid-phase partitioning of Ni2+ in GR extended from equilibrium solid-solution behavior.

Solid oxide fuel cell generator

DOEpatents

Di Croce, A.M.; Draper, R.

1993-11-02

A solid oxide fuel cell generator has a plenum containing at least two rows of spaced apart, annular, axially elongated fuel cells. An electrical conductor extending between adjacent rows of fuel cells connects the fuel cells of one row in parallel with each other and in series with the fuel cells of the adjacent row. 5 figures.

Robust, functional nanocrystal solids by infilling with atomic layer deposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Yao; Gibbs, Markelle; Perkins, Craig L.

2011-12-14

Thin films of colloidal semiconductor nanocrystals (NCs) are inherently metatstable materials prone to oxidative and photothermal degradation driven by their large surface-to-volume ratios and high surface energies. The fabrication of practical electronic devices based on NC solids hinges on preventing oxidation, surface diffusion, ripening, sintering, and other unwanted physicochemical changes that can plague these materials. Here we use low-temperature atomic layer deposition (ALD) to infill conductive PbSe NC solids with metal oxides to produce inorganic nanocomposites in which the NCs are locked in place and protected against oxidative and photothermal damage. Infilling NC field-effect transistors and solar cells with amorphousmore » alumina yields devices that operate with enhanced and stable performance for at least months in air. Furthermore, ALD infilling with ZnO lowers the height of the inter-NC tunnel barrier for electron transport, yielding PbSe NC films with electron mobilities of 1 cm² V -1 s -1. Our ALD technique is a versatile means to fabricate robust NC solids for optoelectronic devices.« less

Hybrid Solid Oxide Fuel Cell/Gas Turbine System Design for High Altitude Long Endurance Aerospace Missions

NASA Technical Reports Server (NTRS)

Himansu, Ananda; Freeh, Joshua E.; Steffen, Christopher J., Jr.; Tornabene, Robert T.; Wang, Xiao-Yen J.

2006-01-01

A system level analysis, inclusive of mass, is carried out for a cryogenic hydrogen fueled hybrid solid oxide fuel cell and bottoming gas turbine (SOFC/GT) power system. The system is designed to provide primary or secondary electrical power for an unmanned aerial vehicle (UAV) over a high altitude, long endurance mission. The net power level and altitude are parametrically varied to examine their effect on total system mass. Some of the more important technology parameters, including turbomachinery efficiencies and the SOFC area specific resistance, are also studied for their effect on total system mass. Finally, two different solid oxide cell designs are compared to show the importance of the individual solid oxide cell design on the overall system. We show that for long mission durations of 10 days or more, the fuel mass savings resulting from the high efficiency of a SOFC/GT system more than offset the larger powerplant mass resulting from the low specific power of the SOFC/GT system. These missions therefore favor high efficiency, low power density systems, characteristics typical of fuel cell systems in general.

Method and apparatus for assembling solid oxide fuel cells

DOEpatents

Szreders, B.E.; Campanella, N.

1988-05-11

This invention relates generally to solid oxide fuel power generators and is particularly directed to improvements in the assembly and coupling of solid oxide fuel cell modules. A plurality of jet air tubes are supported and maintained in a spaced matrix array by a positioning/insertion assembly for insertion in respective tubes of a solid oxide fuel cell (SOFC) in the assembly of an SOFC module. The positioning/insertion assembly includes a plurality of generally planar, elongated, linear vanes which are pivotally mounted at each end thereof to a support frame. A rectangular compression assembly of adjustable size is adapted to receive and squeeze a matrix of SOFC tubes so as to compress the inter-tube nickel felt conductive pads which provide series/parallel electrical connection between adjacent SOFCs, with a series of increasingly larger retainer frames used to maintain larger matrices of SOFC tubes in position. Expansion of the SOFC module housing at the high operating temperatures of the SOFC is accommodated by conductive, flexible, resilient expansion, connector bars which provide support and electrical coupling at the top and bottom of the SOFC module housing. 17 figs.

Charging a Li-O₂ battery using a redox mediator.

PubMed

Chen, Yuhui; Freunberger, Stefan A; Peng, Zhangquan; Fontaine, Olivier; Bruce, Peter G

2013-06-01

The non-aqueous Li-air (O2) battery is receiving intense interest because its theoretical specific energy exceeds that of Li-ion batteries. Recharging the Li-O2 battery depends on oxidizing solid lithium peroxide (Li2O2), which is formed on discharge within the porous cathode. However, transporting charge between Li2O2 particles and the solid electrode surface is at best very difficult and leads to voltage polarization on charging, even at modest rates. This is a significant problem facing the non-aqueous Li-O2 battery. Here we show that incorporation of a redox mediator, tetrathiafulvalene (TTF), enables recharging at rates that are impossible for the cell in the absence of the mediator. On charging, TTF is oxidized to TTF(+) at the cathode surface; TTF(+) in turn oxidizes the solid Li2O2, which results in the regeneration of TTF. The mediator acts as an electron-hole transfer agent that permits efficient oxidation of solid Li2O2. The cell with the mediator demonstrated 100 charge/discharge cycles.

Lowering the temperature of solid oxide fuel cells.

PubMed

Wachsman, Eric D; Lee, Kang Taek

2011-11-18

Fuel cells are uniquely capable of overcoming combustion efficiency limitations (e.g., the Carnot cycle). However, the linking of fuel cells (an energy conversion device) and hydrogen (an energy carrier) has emphasized investment in proton-exchange membrane fuel cells as part of a larger hydrogen economy and thus relegated fuel cells to a future technology. In contrast, solid oxide fuel cells are capable of operating on conventional fuels (as well as hydrogen) today. The main issue for solid oxide fuel cells is high operating temperature (about 800°C) and the resulting materials and cost limitations and operating complexities (e.g., thermal cycling). Recent solid oxide fuel cells results have demonstrated extremely high power densities of about 2 watts per square centimeter at 650°C along with flexible fueling, thus enabling higher efficiency within the current fuel infrastructure. Newly developed, high-conductivity electrolytes and nanostructured electrode designs provide a path for further performance improvement at much lower temperatures, down to ~350°C, thus providing opportunity to transform the way we convert and store energy.

Rapid, cool sintering of wet processed yttria-stabilized zirconia ceramic electrolyte thin films.

PubMed

Park, Jun-Sik; Kim, Dug-Joong; Chung, Wan-Ho; Lim, Yonghyun; Kim, Hak-Sung; Kim, Young-Beom

2017-09-29

Here we report a photonic annealing process for yttria-stabilized zirconia films, which are one of the most well-known solid-state electrolytes for solid oxide fuel cells (SOFCs). Precursor films were coated using a wet-chemical method with a simple metal-organic precursor solution and directly annealed at standard pressure and temperature by two cycles of xenon flash lamp irradiation. The residual organics were almost completely decomposed in the first pre-annealing step, and the fluorite crystalline phases and good ionic conductivity were developed during the second annealing step. These films showed properties comparable to those of thermally annealed films. This process is much faster than conventional annealing processes (e.g. halogen furnaces); a few seconds compared to tens of hours, respectively. The significance of this work includes the treatment of solid-state electrolyte oxides for SOFCs and the demonstration of the feasibility of other oxide components for solid-state energy devices.

In situ remediation process using divalent metal cations

DOEpatents

Brady, Patrick V.; Khandaker, Nadim R.; Krumhansl, James L.; Teter, David M.

2004-12-14

An in situ process for treating ambient solid materials (e.g., soils, aquifer solids, sludges) by adding one or more divalent metal cations to the ambient solid material. The added divalent metal cations, such as Cu.sup.2+ or Zn.sup.2+, combine with metal oxide/hydroxides (e.g., ferric oxide/hydroxide or aluminum oxide/hydroxide) already present in the ambient solid material to form an effective sorbent material having a large number of positively-charged surface complexes that binds and immobilizes anionic contaminant species (e.g., arsenic or chromate). Divalent metal cations can be added, for example, by injecting an aqueous solution of CuSO.sub.4 into an aquifer contaminated with arsenic or chromate. Also, sludges can be stabilized against leaching of anionic contaminants through the addition of divalent metal cations. Also, an inexpensive sorbent material can be easily formed by mixing divalent metal cations with soil that has been removed from the ground.

The main directions in technology investigation of soid oxide fuel cell in Russian Federal Research Center Institute of Physics & Power Engineering (IPPE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ievleva, J.I.; Kolesnikov, V.P.; Mezhertisky, G.S.

1996-04-01

The main direction of science investigations for creation of efficient solid oxide fuel cells (SOFC) in IPPE are considered in this work. The development program of planar SOFC with thin-film electrolyte is shown. General design schemes of experimental SOFC units are presented. The flow design schemes of processes for initial materials and electrodes fabrication are shown. The results of investigations for creation thin-film solid oxide electrolyte at porous cathode by magnetron sputtering from complex metal target in oxidative environment are presented.

5. A PHOTO IMAGE FROM THE WEST SIDEWALK LOOKING EAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. A PHOTO IMAGE FROM THE WEST SIDEWALK LOOKING EAST TOWARD THE ENTRY GATES AND PORTIONS OF RILEY PARK - Delphi Bridge on U.S. Route 421, Spanning Deer Creek at U.S. Route 421, Delphi, Carroll County, IN

Identification of Response Options to Artisanal and Small-Scale Gold Mining (ASGM) in Ghana via the Delphi Process.

PubMed

Basu, Avik; Phipps, Sean; Long, Rachel; Essegbey, George; Basu, Niladri

2015-09-10

The Delphi technique is a means of facilitating discussion among experts in order to develop consensus, and can be used for policy formulation. This article describes a modified Delphi approach in which 27 multi-disciplinary academics and 22 stakeholders from Ghana and North America were polled about ways to address negative effects of small-scale gold mining (ASGM) in Ghana. In early 2014, the academics, working in disciplinary groups, synthesized 17 response options based on data aggregated during an Integrated Assessment of ASGM in Ghana. The researchers participated in two rounds of Delphi polling in March and April 2014, during which 17 options were condensed into 12. Response options were rated via a 4-point Likert scale in terms of benefit (economic, environmental, and benefit to people) and feasibility (economic, social/cultural, political, and implementation). The six highest-scoring options populated a third Delphi poll, which 22 stakeholders from diverse sectors completed in April 2015. The academics and stakeholders also prioritized the response options using ranking exercises. The technique successfully gauged expert opinion on ASGM, and helped identify potential responses, policies and solutions for the sector. This is timely given that improvement to the ASGM sector is an important component within the UN Minamata Convention.

Identification of Response Options to Artisanal and Small-Scale Gold Mining (ASGM) in Ghana via the Delphi Process

PubMed Central

Basu, Avik; Phipps, Sean; Long, Rachel; Essegbey, George; Basu, Niladri

2015-01-01

The Delphi technique is a means of facilitating discussion among experts in order to develop consensus, and can be used for policy formulation. This article describes a modified Delphi approach in which 27 multi-disciplinary academics and 22 stakeholders from Ghana and North America were polled about ways to address negative effects of small-scale gold mining (ASGM) in Ghana. In early 2014, the academics, working in disciplinary groups, synthesized 17 response options based on data aggregated during an Integrated Assessment of ASGM in Ghana. The researchers participated in two rounds of Delphi polling in March and April 2014, during which 17 options were condensed into 12. Response options were rated via a 4-point Likert scale in terms of benefit (economic, environmental, and benefit to people) and feasibility (economic, social/cultural, political, and implementation). The six highest-scoring options populated a third Delphi poll, which 22 stakeholders from diverse sectors completed in April 2015. The academics and stakeholders also prioritized the response options using ranking exercises. The technique successfully gauged expert opinion on ASGM, and helped identify potential responses, policies and solutions for the sector. This is timely given that improvement to the ASGM sector is an important component within the UN Minamata Convention. PMID:26378557

Towards an international taxonomy of integrated primary care: a Delphi consensus approach.

PubMed

Valentijn, Pim P; Vrijhoef, Hubertus J M; Ruwaard, Dirk; Boesveld, Inge; Arends, Rosa Y; Bruijnzeels, Marc A

2015-05-22

Developing integrated service models in a primary care setting is considered an essential strategy for establishing a sustainable and affordable health care system. The Rainbow Model of Integrated Care (RMIC) describes the theoretical foundations of integrated primary care. The aim of this study is to refine the RMIC by developing a consensus-based taxonomy of key features. First, the appropriateness of previously identified key features was retested by conducting an international Delphi study that was built on the results of a previous national Delphi study. Second, categorisation of the features among the RMIC integrated care domains was assessed in a second international Delphi study. Finally, a taxonomy was constructed by the researchers based on the results of the three Delphi studies. The final taxonomy consists of 21 key features distributed over eight integration domains which are organised into three main categories: scope (person-focused vs. population-based), type (clinical, professional, organisational and system) and enablers (functional vs. normative) of an integrated primary care service model. The taxonomy provides a crucial differentiation that clarifies and supports implementation, policy formulation and research regarding the organisation of integrated primary care. Further research is needed to develop instruments based on the taxonomy that can reveal the realm of integrated primary care in practice.

DIET@NET: Best Practice Guidelines for dietary assessment in health research.

PubMed

Cade, Janet E; Warthon-Medina, Marisol; Albar, Salwa; Alwan, Nisreen A; Ness, Andrew; Roe, Mark; Wark, Petra A; Greathead, Katharine; Burley, Victoria J; Finglas, Paul; Johnson, Laura; Page, Polly; Roberts, Katharine; Steer, Toni; Hooson, Jozef; Greenwood, Darren C; Robinson, Sian

2017-11-15

Dietary assessment is complex, and strategies to select the most appropriate dietary assessment tool (DAT) in epidemiological research are needed. The DIETary Assessment Tool NETwork (DIET@NET) aimed to establish expert consensus on Best Practice Guidelines (BPGs) for dietary assessment using self-report. The BPGs were developed using the Delphi technique. Two Delphi rounds were conducted. A total of 131 experts were invited, and of these 65 accepted, with 48 completing Delphi round I and 51 completing Delphi round II. In all, a total of 57 experts from North America, Europe, Asia and Australia commented on the 47 suggested guidelines. Forty-three guidelines were generated, grouped into the following four stages: Stage I. Define what is to be measured in terms of dietary intake (what? who? and when?); Stage II. Investigate different types of DATs; Stage III. Evaluate existing tools to select the most appropriate DAT by evaluating published validation studies; Stage IV. Think through the implementation of the chosen DAT and consider sources of potential biases. The Delphi technique consolidated expert views on best practice in assessing dietary intake. The BPGs provide a valuable guide for health researchers to choose the most appropriate dietary assessment method for their studies. These guidelines will be accessible through the Nutritools website, www.nutritools.org .

Development of a clinical definition for acute respiratory distress syndrome using the Delphi technique.

PubMed

Ferguson, Niall D; Davis, Aileen M; Slutsky, Arthur S; Stewart, Thomas E

2005-06-01

The objective of this study is to describe the implementation of formal consensus techniques in the development of a clinical definition for acute respiratory distress syndrome. A Delphi consensus process was conducted using e-mail. Sixteen panelists who were both researchers and opinion leaders were systematically recruited. The Delphi technique was performed over 4 rounds on the background of an explicit definition framework. Item generation was performed in round 1, item reduction in rounds 2 and 3, and definition evaluation in round 4. Explicit consensus thresholds were used throughout. Of the 16 panelists, 11 actually participated in developing a definition that met a priori consensus rules on the third iteration. New incorporations in the Delphi definition include the use of a standardized oxygenation assessment and the documentation of either a predisposing factor or decreased thoracic compliance. The panelists rated the Delphi definition as acceptable to highly acceptable (median score, 6; range, 5-7 on a 7-point Likert scale). We conclude that it is feasible to consider using formal consensus in the development of future definitions of acute respiratory distress syndrome. Testing of sensibility, reliability, and validity are needed for this preliminary definition; these test results should be incorporated into future iterations of this definition.

METHOD OF COMBINING HYDROGEN AND OXYGEN

DOEpatents

McBride, J.P.

1962-02-27

A method is given for the catalytic recombination of radiolytic hydrogen and/or deulerium and oxygen resulting from the subjection or an aqueous thorium oxide or thorium oxide-uranium oxide slurry to ionizing radiation. An improved catalyst is prepared by providing paliadium nitrate in an aqueous thorium oxide sol at a concentration of at least 0.05 grams per gram of thorium oxide and contacting the sol with gaseous hydrogen to form flocculated solids. The solids are then recovered and added to the slurry to provide a palladium concentration of 100 to 1000 parts per million. Recombination is effected by the calalyst at a rate sufficient to support high nuclear reactor power densities. (AEC)

Hybrid deposition of thin film solid oxide fuel cells and electrolyzers

DOEpatents

Jankowski, A.F.; Makowiecki, D.M.; Rambach, G.D.; Randich, E.

1998-05-19

The use of vapor deposition techniques enables synthesis of the basic components of a solid oxide fuel cell (SOFC); namely, the electrolyte layer, the two electrodes, and the electrolyte-electrode interfaces. Such vapor deposition techniques provide solutions to each of the three critical steps of material synthesis to produce a thin film solid oxide fuel cell (TFSOFC). The electrolyte is formed by reactive deposition of essentially any ion conducting oxide, such as defect free, yttria stabilized zirconia (YSZ) by planar magnetron sputtering. The electrodes are formed from ceramic powders sputter coated with an appropriate metal and sintered to a porous compact. The electrolyte-electrode interface is formed by chemical vapor deposition of zirconia compounds onto the porous electrodes to provide a dense, smooth surface on which to continue the growth of the defect-free electrolyte, whereby a single fuel cell or multiple cells may be fabricated. 8 figs.

Selective deposition of nanostructured ruthenium oxide using Tobacco mosaic virus for micro-supercapacitors in solid Nafion electrolyte

NASA Astrophysics Data System (ADS)

Gnerlich, Markus; Ben-Yoav, Hadar; Culver, James N.; Ketchum, Douglas R.; Ghodssi, Reza

2015-10-01

A three-dimensional micro-supercapacitor has been developed using a novel bottom-up assembly method combining genetically modified Tobacco mosaic virus (TMV-1Cys), photolithographically defined micropillars and selective deposition of ruthenium oxide on multi-metallic microelectrodes. The three-dimensional microelectrodes consist of a titanium nitride current collector with two functionalized areas: (1) gold coating on the active electrode area promotes TMV-1Cys adhesion, and (2) sacrificial nickel pads dissolve in ruthenium tetroxide plating solution to produce ruthenium oxide on all electrically connected areas. The microfabricated electrodes are arranged in an interdigitated pattern, and the capacitance per electrode has been measured as high as 203 mF cm-2 with solid Nafion electrolyte. The process integration of bio-templated ruthenium oxide with microfabricated electrodes and solid electrolyte is an important advance towards the energy storage needs of mass produced self-sufficient micro-devices.

Effect of trace metals and sulfite oxidation of adipic acid degradation in FGD systems. Final report Dec 81-May 82

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jarvis, J.B.; Terry, J.C.; Schubert, S.A.

The report gives results of the measurement of the adipic acid degradation rate in a bench-scale flue gas desulfurization (FGD) system, designed to simulate many of the important aspects of full-scale FGD systems. Results show that the adipic acid degradation rate depends on the sulfite oxidation rate, the adipic acid concentration, the presence of manganese in solution, and temperature. The degradation rate is also affected by pH, but only when manganese is present. Adipic acid degradation products identified in the liquid phase include valeric, butyric, propionic, succinic, and glutaric acids. When manganese was present, the predominant degradation products were succinicmore » and glutaric acids. Analysis of solids from the bench scale tests shows large concentrations of coprecipitated adipic acid in low oxidation sulfite solids. By contrast, low quantities of coprecipitated adipic acid were found in high oxidation gypsum solids.« less

One-step electrolytic preparation of Si-Fe alloys as anodes for lithium ion batteries

NASA Astrophysics Data System (ADS)

Wang, Hailong; Sun, Diankun; Song, Qiqi; Xie, Wenqi; Jiang, Xu; Zhang, Bo

2016-06-01

One-step electrolytic formation of uniform crystalline Si-Fe alloy particles was successfully demonstrated in direct electro-reduction of solid mixed oxides of SiO2 and Fe2O3 in molten CaCl2 at 900∘C. Upon constant voltage electrolysis of solid mixed oxides at 2.8V between solid oxide cathode and graphite anode for 5h, electrolytic Si-Fe with the same Si/Fe stoichimetry of the precursory oxides was generated. The firstly generated Fe could function as depolarizers to enhance reduction rate of SiO2, resulting in the enhanced reduction kinetics to the electrolysis of individual SiO2. When evaluated as anode for lithium ion batteries, the prepared SiFe electrode showed a reversible lithium storage capacity as high as 470mAh g-1 after 100 cycles at 200mA g-1, promising application in high-performance lithium ion batteries.

Scaling-Up Solid Oxide Membrane Electrolysis Technology for Magnesium Production

NASA Astrophysics Data System (ADS)

Pati, Soobhankar; Powell, Adam; Tucker, Steve; Derezinski, Steve

Metal Oxygen Separation Technologies, Inc. (MOxST) is actively developing Solid Oxide Membrane (SOM) electrolysis technology for production of magnesium directly from its oxide. The vital component of this technology is the oxygen ion-conducting solid zirconia electrolyte separating the molten flux (a mixture of salts and oxide) and the inert anode. The zirconia not only protects the anode from the flux but also prevents anode gas back-reaction, increasing the efficiency. This makes it possible to produce low-cost high-purity magnesium and high-purity oxygen as a byproduct with no direct greenhouse gas emissions. In this paper we discuss the design modifications made to address the scaling-up challenges, particularly for producing magnesium in liquid form. The key accomplishment to date is the successful development of a prototype capable of producing few kilograms of magnesium per day. We will also describe the prerequisite properties of an inert anode and suitable materials for the same.

Hybrid deposition of thin film solid oxide fuel cells and electrolyzers

DOEpatents

Jankowski, Alan F.; Makowiecki, Daniel M.; Rambach, Glenn D.; Randich, Erik

1999-01-01

The use of vapor deposition techniques enables synthesis of the basic components of a solid oxide fuel cell (SOFC); namely, the electrolyte layer, the two electrodes, and the electrolyte-electrode interfaces. Such vapor deposition techniques provide solutions to each of the three critical steps of material synthesis to produce a thin film solid oxide fuel cell (TFSOFC). The electrolyte is formed by reactive deposition of essentially any ion conducting oxide, such as defect free, yttria stabilized zirconia (YSZ) by planar magnetron sputtering. The electrodes are formed from ceramic powders sputter coated with an appropriate metal and sintered to a porous compact. The electrolyte-electrode interface is formed by chemical vapor deposition of zirconia compounds onto the porous electrodes to provide a dense, smooth surface on which to continue the growth of the defect-free electrolyte, whereby a single fuel cell or multiple cells may be fabricated.

Hybrid deposition of thin film solid oxide fuel cells and electrolyzers

DOEpatents

Jankowski, Alan F.; Makowiecki, Daniel M.; Rambach, Glenn D.; Randich, Erik

1998-01-01

The use of vapor deposition techniques enables synthesis of the basic components of a solid oxide fuel cell (SOFC); namely, the electrolyte layer, the two electrodes, and the electrolyte-electrode interfaces. Such vapor deposition techniques provide solutions to each of the three critical steps of material synthesis to produce a thin film solid oxide fuel cell (TFSOFC). The electrolyte is formed by reactive deposition of essentially any ion conducting oxide, such as defect free, yttria stabilized zirconia (YSZ) by planar magnetron sputtering. The electrodes are formed from ceramic powders sputter coated with an appropriate metal and sintered to a porous compact. The electrolyte-electrode interface is formed by chemical vapor deposition of zirconia compounds onto the porous electrodes to provide a dense, smooth surface on which to continue the growth of the defect-free electrolyte, whereby a single fuel cell or multiple cells may be fabricated.

Application of the monolithic solid oxide fuel cell to space power systems

NASA Astrophysics Data System (ADS)

Myles, Kevin M.; Bhattacharyya, Samit K.

1991-01-01

The monolithic solid-oxide fuel cell (MSOFC) is a promising electrochemical power generation device that is currently under development at Argonne National Laboratory. The extremely high power density of the MSOFC leads to MSOFC systems that have sufficiently high energy densities that they are excellent candidates for a number of space missions. The fuel cell can also be operated in reverse, if it can be coupled to an external power source, to regenerate the fuel and oxidant from the water product. This feature further enhances the potential mission applications of the MSOFC. In this paper, the current status of the fuel cell development is presented—the focus being on fabrication and currently achievable performance. In addition, a specific example of a space power system, featuring a liquid metal cooled fast spectrum nuclear reactor and a monolithic solid oxide fuel cell, is presented to demonstrate the features of an integrated system.

Selective deposition of nanostructured ruthenium oxide using Tobacco mosaic virus for micro-supercapacitors in solid Nafion electrolyte

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gnerlich, Markus; Ben-Yoav, Hadar; Culver, James N.

A three-dimensional micro-supercapacitor has been developed using a novel bottom-up assembly method combining genetically modified Tobacco mosaic virus (TMV-1Cys), photolithographically defined micropillars and selective deposition of ruthenium oxide on multi-metallic microelectrodes. The three-dimensional microelectrodes consist of a titanium nitride current collector with two functionalized areas: (1) gold coating on the active electrode area promotes TMV-1Cys adhesion, and (2) sacrificial nickel pads dissolve in ruthenium tetroxide plating solution to produce ruthenium oxide on all electrically connected areas. The microfabricated electrodes are arranged in an interdigitated pattern, and the capacitance per electrode has been measured as high as 203 mF cm-2 withmore » solid Nafion electrolyte. The process integration of bio-templated ruthenium oxide with microfabricated electrodes and solid electrolyte is an important advance towards the energy storage needs of mass produced self-sufficient micro-devices.« less

Dramatically different kinetics and mechanism at solid/liquid and solid/gas interfaces for catalytic isopropanol oxidation over size-controlled platinum nanoparticles.

PubMed

Wang, Hailiang; Sapi, Andras; Thompson, Christopher M; Liu, Fudong; Zherebetskyy, Danylo; Krier, James M; Carl, Lindsay M; Cai, Xiaojun; Wang, Lin-Wang; Somorjai, Gabor A

2014-07-23

We synthesize platinum nanoparticles with controlled average sizes of 2, 4, 6, and 8 nm and use them as model catalysts to study isopropanol oxidation to acetone in both the liquid and gas phases at 60 °C. The reaction at the solid/liquid interface is 2 orders of magnitude slower than that at the solid/gas interface, while catalytic activity increases with the size of platinum nanoparticles for both the liquid-phase and gas-phase reactions. The activation energy of the gas-phase reaction decreases with the platinum nanoparticle size and is in general much higher than that of the liquid-phase reaction which is largely insensitive to the size of catalyst nanoparticles. Water substantially promotes isopropanol oxidation in the liquid phase. However, it inhibits the reaction in the gas phase. The kinetic results suggest different mechanisms between the liquid-phase and gas-phase reactions, correlating well with different orientations of IPA species at the solid/liquid interface vs the solid/gas interface as probed by sum frequency generation vibrational spectroscopy under reaction conditions and simulated by computational calculations.

Electrode-Impregnable and Cross-Linkable Poly(ethylene oxide)-Poly(propylene oxide)-Poly(ethylene oxide) Triblock Polymer Electrolytes with High Ionic Conductivity and a Large Voltage Window for Flexible Solid-State Supercapacitors.

PubMed

Han, Jae Hee; Lee, Jang Yong; Suh, Dong Hack; Hong, Young Taik; Kim, Tae-Ho

2017-10-04

We present cross-linkable precursor-type gel polymer electrolytes (GPEs) that have large ionic liquid uptake capability, can easily penetrate electrodes, have high ion conductivity, and are mechanically strong as high-performance, flexible all-solid-state supercapacitors (SC). Our polymer precursors feature a hydrophilic-hydrophobic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock main-chain structure and trifunctional silane end groups that can be multi-cross-linked with each other through a sol-gel process. The cross-linked solid-state electrolyte film with moderate IL content (200 wt %) shows a well-balanced combination of excellent ionic conductivity (5.0 × 10 -3 S cm -1 ) and good mechanical stability (maximum strain = 194%). Moreover, our polymer electrolytes have various advantages including high thermal stability (decomposition temperature > 330 °C) and the capability to impregnate electrodes to form an excellent electrode-electrolyte interface due to the very low viscosity of the precursors. By assembling our GPE-impregnated electrodes and solid-state GPE film, we demonstrate an all-solid-state SC that can operate at 3 V and provides an improved specific capacitance (112.3 F g -1 at 0.1 A g -1 ), better rate capability (64% capacity retention until 20 A g -1 ), and excellent cycle stability (95% capacitance decay over 10 000 charge/discharge cycles) compared with those of a reference SC using a conventional PEO electrolyte. Finally, flexible SCs with a high energy density (22.6 W h kg -1 at 1 A g -1 ) and an excellent flexibility (>93% capacitance retention after 5000 bending cycles) can successfully be obtained.

High conducting oxide--sulfide composite lithium superionic conductor

DOEpatents

Liang, Chengdu; Rangasamy, Ezhiylmurugan; Dudney, Nancy J.; Keum, Jong Kahk; Rondinone, Adam Justin

2017-01-17

A solid electrolyte for a lithium-sulfur battery includes particles of a lithium ion conducting oxide composition embedded within a lithium ion conducting sulfide composition. The lithium ion conducting oxide composition can be Li.sub.7La.sub.3Zr.sub.2O.sub.12 (LLZO). The lithium ion conducting sulfide composition can be .beta.-Li.sub.3PS.sub.4 (LPS). A lithium ion battery and a method of making a solid electrolyte for a lithium ion battery are also disclosed.

Identification of a Methane Oxidation Intermediate on Solid Oxide Fuel Cell Anode Surfaces with Fourier Transform Infrared Emission.

PubMed

Pomfret, Michael B; Steinhurst, Daniel A; Owrutsky, Jeffrey C

2013-04-18

Fuel interactions on solid oxide fuel cell (SOFC) anodes are studied with in situ Fourier transform infrared emission spectroscopy (FTIRES). SOFCs are operated at 800 °C with CH4 as a representative hydrocarbon fuel. IR signatures of gas-phase oxidation products, CO2(g) and CO(g), are observed while cells are under load. A broad feature at 2295 cm(-1) is assigned to CO2 adsorbed on Ni as a CH4 oxidation intermediate during cell operation and while carbon deposits are electrochemically oxidized after CH4 operation. Electrochemical control provides confirmation of the assignment of adsorbed CO2. FTIRES has been demonstrated as a viable technique for the identification of fuel oxidation intermediates and products in working SOFCs, allowing for the elucidation of the mechanisms of fuel chemistry.

Composite anode La0.8Sr0.2MnO3 impregnated with cobalt oxide for steam electrolysis

NASA Astrophysics Data System (ADS)

Li, Shisong; Cheng, Jigui; Xie, Kui; Li, Peipei; Wu, Yucheng

2013-12-01

Oxygen-ion conducting solid oxide electrolyzer (SOE) has attracted a great deal of interest because it converts electrical energy into chemical energy directly. The oxygen evolution reaction (OER) is occurred at the anode of solid oxide electrolyzer as the O2- being oxidized and form O2 gas, which is considered as one of the major cause of overpotentials in steam electrolyzers. This paper investigates the electrolysis of steam based on cobalt oxide impregnated La0.8Sr0.2MnO3 (LSM) composite anode in an oxide-ion-conducting solid oxide electrolyzer. The conductivity of LSM is studied versus temperature and oxygen partial pressure and correlated to the electrochemical properties of the composite electrodes in symmetric cells at 800 °C. Different contents of Co3O4 (wt.1%, 2%, 4%, 6%, 8%, 10%) were impregnated into LSM electrode and it was found that the polarization resistance (Rp) of symmetric cells gradually improved from 1.16 Ω•cm2 (LSM) to 0.24 Ω•cm2 (wt.10%Co3O4-LSM). Steam electrolysis based on LSM and wt.6%Co3O4-LSM anode electrolyzers are tested at 800°C and the AC impedance spectroscopy results indicated that the Rp of high frequency process significantly decreased from1.1 Ω•cm2 (LSM) to 0.5 Ω•cm2 (wt.6%Co3O4-LSM) under 1.8V electrolysis voltage and the Rp of low frequency process decreased from 14.9 Ω•cm2 to 5.7 Ω•cm2. Electrochemical catalyst Co3O4 can efficiently improve the electrode and enhance the performance of high temperature solid oxide electrolyzer.

Successful and Unsuccessful Multicultural Supervisory Behaviors: A Delphi Poll

ERIC Educational Resources Information Center

Dressel, Jeana L.; Consoli, Andres J.; Kim, Bryan S.K.; Atkinson, Donald R.

2007-01-01

Using the Delphi method, university counseling center supervisors with significant experience in multicultural supervision generated and ranked elements of successful and unsuccessful multicultural supervision. Twenty-seven of 35 successful elements and 24 of 33 unsuccessful elements involved cultural considerations. Multicultural supervision was…

Highlights from Faraday Discussion 182: Solid Oxide Electrolysis: Fuels and Feedstocks from Water and Air, York, UK, July 2015.

PubMed

Stefan, Elena; Norby, Truls

2016-01-31

The rising importance of converting high peak electricity from renewables to fuels has urged field specialists to organize this Faraday Discussion on Solid Oxide Electrolysis. The topic is of essential interest in order to achieve a greater utilization of renewable energy and storage at higher densities.

Solid Oxide Fuel Cell Seal Development at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.; Bansal, Narottam P.; Dynys, Fred W.; Lang, Jerry; Daniels, Christopher C.; Palko, Joeseph L.; Choi, S. R.

2004-01-01

Researchers at NASA GRC are confronting the seal durability challenges of Solid Oxide Fuel Cells by pursuing an integrated and multidisciplinary development effort incorporating thermo-structural analyses, advanced materials, experimentation, and novel seal design concepts. The successful development of durable hermetic SOFC seals is essential to reliably producing the high power densities required for aerospace applications.

Viscous sealing glass compositions for solid oxide fuel cells

DOEpatents

Kim, Cheol Woon; Brow, Richard K.

2016-12-27

A sealant for forming a seal between at least two solid oxide fuel cell components wherein the sealant comprises a glass material comprising B.sub.2O.sub.3 as a principal glass former, BaO, and other components and wherein the glass material is substantially alkali-free and contains less than 30% crystalline material.

Ni modified ceramic anodes for direct-methane solid oxide fuel cells

DOEpatents

Xiao, Guoliang; Chen, Fanglin

2016-01-19

In accordance with certain embodiments of the present disclosure, a method for fabricating a solid oxide fuel cell is described. The method includes synthesizing a composition having a perovskite present therein. The method further includes applying the composition on an electrolyte support to form an anode and applying Ni to the composition on the anode.

Co-flow anode/cathode supply heat exchanger for a solid-oxide fuel cell assembly

DOEpatents

Haltiner, Jr., Karl J.; Kelly, Sean M.

2005-11-22

In a solid-oxide fuel cell assembly, a co-flow heat exchanger is provided in the flow paths of the reformate gas and the cathode air ahead of the fuel cell stack, the reformate gas being on one side of the exchanger and the cathode air being on the other. The reformate gas is at a substantially higher temperature than is desired in the stack, and the cathode gas is substantially cooler than desired. In the co-flow heat exchanger, the temperatures of the reformate and cathode streams converge to nearly the same temperature at the outlet of the exchanger. Preferably, the heat exchanger is formed within an integrated component manifold (ICM) for a solid-oxide fuel cell assembly.

Brazing of Stainless Steel to Yttria-Stabilized Zirconia Using Gold-Based Brazes for Solid Oxide Fuel Cell Applications

NASA Technical Reports Server (NTRS)

Singh, M.; Shpargel, T. P.; Asthana, R.

2007-01-01

Two gold-base active metal brazes (gold-ABA and gold-ABA-V) were evaluated for oxidation resistance to 850 C, and used to join yttria-stabilized zirconia (YSZ) to a corrosion-resistant ferritic stainless steel for possible use in solid oxide fuel cells. Thermogravimetric analysis and optical microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy were used to evaluate the braze oxidation behavior, and microstructure and composition of the YSZ/braze/steel joints. Both gold-ABA and gold-ABA-V exhibited nearly linear oxidation kinetics at 850 C, with gold-ABA-V showing faster oxidation than gold-ABA. Both brazes produced metallurgically sound YSZ/steel joints due to chemical interactions of Ti and V with the YSZ and steel substrates.

An international delphi survey for the definition of the variables for the development of new classification criteria for periodic fever aphtous stomatitis pharingitis cervical adenitis (PFAPA).

PubMed

Vanoni, Federica; Federici, Silvia; Antón, Jordi; Barron, Karyl S; Brogan, Paul; De Benedetti, Fabrizio; Dedeoglu, Fatma; Demirkaya, Erkan; Hentgen, Veronique; Kallinich, Tilmann; Laxer, Ronald; Russo, Ricardo; Toplak, Natasa; Uziel, Yosef; Martini, Alberto; Ruperto, Nicolino; Gattorno, Marco; Hofer, Michael

2018-04-18

Diagnosis of Periodic fever, aphthous stomatitis, pharyngitis and cervical adenitis (PFAPA) is currently based on a set of criteria proposed in 1999 modified from Marshall's criteria. Nevertheless no validated evidence based set of classification criteria for PFAPA has been established so far. The aim of this study was to identify candidate classification criteria PFAPA syndrome using international consensus formation through a Delphi questionnaire survey. A first open-ended questionnaire was sent to adult and pediatric clinicians/researchers, asking to identify the variables thought most likely to be helpful and relevant for the diagnosis of PFAPA. In a second survey, respondents were asked to select, from the list of variables coming from the first survey, the 10 features that they felt were most important, and to rank them in descending order from most important to least important. The response rate to the first and second Delphi was respectively 109/124 (88%) and 141/162 (87%). The number of participants that completed the first and second Delphi was 69/124 (56%) and 110/162 (68%). From the first Delphi we obtained a list of 92 variables, of which 62 were selected in the second Delphi. Variables reaching the top five position of the rank were regular periodicity, aphthous stomatitis, response to corticosteroids, cervical adenitis, and well-being between flares. Our process led to identification of features that were felt to be the most important as candidate classification criteria for PFAPA by a large sample of international rheumatologists. The performance of these items will be tested further in the next phase of the study, through analysis of real patient data.

Gaining consensus on family carer needs when caring for someone dying at home to develop the Carers' Alert Thermometer (CAT): a modified Delphi study.

PubMed

Knighting, Katherine; O'Brien, Mary R; Roe, Brenda; Gandy, Rob; Lloyd-Williams, Mari; Nolan, Mike; Jack, Barbara A

2016-01-01

To report a multi-phase modified Delphi study conducted with carers and professionals to identify the priority areas for inclusion in an alert screening tool for carers providing support to someone dying at home. Internationally, there is a growing emphasis on increasing choice for patients who wish to die at home which relies heavily on care provided by the unpaid family carers. Family carers can have high levels of unmet needs comprising their psychological and physical health and their ability to provide effective care and support. Development of an alert tool to identify carers' needs in everyday practice required identification and consensus of the priority areas of need for inclusion. Multi-phase modified Delphi study and instrument development. Qualitative and quantitative data collection took place between 2011-2013 with 111 carers and 93 professionals to identify carers' needs and gain consensus on the priority areas for inclusion in the alert tool. An expert panel stage and final evidence review post-Delphi were used. The Delphi panels had high levels of agreement and consensus. Ten areas of carer need across two themes of 'the current caring situation' and 'the carer's own health and well-being' were prioritized for inclusion in the alert tool. An optional end-of-life planning question was included following the final stages. The results provide evidence of carers' needs to be assessed, areas for consideration in the education of those who support carers and someone dying at home and targeting of services, while demonstrating the usefulness and adaptability of the Delphi method. © 2015 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.

BCQ+: a body constitution questionnaire to assess Yang-Xu. Part I: establishment of a first final version through a Delphi process.

PubMed

Su, Yi-Chang; Chen, Li-Li; Lin, Jun-Dai; Lin, Jui-Shan; Huang, Yi-Chia; Lai, Jim-Shoung

2008-12-01

Assessing an individual's level of Yang deficiency (Yang-Xu) by its manifestations is a frequent issue in traditional Chinese medicine (TCM) clinical trials. To this end, an objective, reliable and rigorous diagnostic tool is required. This study aimed to develop a first final version of the Yang-Xu Constitution Questionnaire. We conducted 3 steps to develop such an objective measurement tool: 1) the research team was formed and a panel of 26 experts was selected for the Delphi process; 2) items for the questionnaire were generated by literature review and a Delphi process; items were reworded into colloquial questions; face and content validity of the items were evaluated through a Delphi process again; 3) the difficulty of the questionnaire was evaluated in a pilot study with 81 subjects aged 20-60 years. The literature review retrieved 35 relevant items which matched the definition of 'constitution' and 'Yang-Xu'. After a first Delphi process, 22 items were retained and translated into colloquial questions. According to the second part of the Delphi process, the content validity index of each of the 22 questions ranged between 0.85-1. These 22 questions were evaluated by 81 subjects, 2 questions that were hard to tell the difference were combined; 3 questions were modified after the research team had discussed the participants' feedback. Finally, the questionnaire was established with 21 questions. This first final version of a questionnaire to assess Yang-Xu constitution with considerable face and content validity may serve as a basis to develop an advanced Yang-Xu questionnaire. 2008 S. Karger AG, Basel.

Quality of care for cancer patients on home parenteral nutrition: development of key interventions and outcome indicators using a two-round Delphi approach.

PubMed

Dreesen, Mira; Foulon, Veerle; Hiele, Martin; Vanhaecht, Kris; De Pourcq, Lutgart; Pironi, Loris; Van Gossum, André; Arends, Jann; Cuerda, Cristina; Thul, Paul; Bozzetti, Frederico; Willems, Ludo

2013-05-01

Clear recommendations on how to guide patients with cancer on home parenteral nutrition (HPN) are lacking as the use of HPN in this population remains a controversial issue. Therefore, the aims of this study were to rank treatment recommendations and main outcome indicators to ensure high-quality care and to indicate differences in care concerning benign versus malignant patients. Treatment recommendations, identified from published guidelines, were used as a starting point for a two-round Delphi approach. Comments and additional interventions proposed in the first round were reevaluated in the second round. Ordinal logistic regression with SPSS 2.0 was used to identify differences in care concerning benign versus malignant patients. Twenty-seven experts from five European countries completed two Delphi rounds. After the second Delphi round, the top three most important outcome indicators were (1) quality of life (QoL), (2) incidence of hospital readmission and (3) incidence of catheter-related infections. Forty-two interventions were considered as important for quality of care (28/42 based on published guidelines; 14/42 newly suggested by Delphi panel). The topics 'Liver disease' and 'Metabolic bone disease' were considered less important for cancer patients, together with use of infusion pumps (p = 0.004) and monitoring of vitamins and trace elements (p = 0.000). Monitoring of QoL is considered more important for cancer patients (p = 0.03). Using a two-round Delphi approach, we developed a minimal set of 42 interventions that may be used to determine quality of care in HPN patients with malignancies. This set of interventions differs from a similar set developed for benign patients.

Solid polymer MEMS-based fuel cells

DOEpatents

Jankowski, Alan F [Livermore, CA; Morse, Jeffrey D [Pleasant Hill, CA

2008-04-22

A micro-electro-mechanical systems (MEMS) based thin-film fuel cells for electrical power applications. The MEMS-based fuel cell may be of a solid oxide type (SOFC), a solid polymer type (SPFC), or a proton exchange membrane type (PEMFC), and each fuel cell basically consists of an anode and a cathode separated by an electrolyte layer. The electrolyte layer can consist of either a solid oxide or solid polymer material, or proton exchange membrane electrolyte materials may be used. Additionally catalyst layers can also separate the electrodes (cathode and anode) from the electrolyte. Gas manifolds are utilized to transport the fuel and oxidant to each cell and provide a path for exhaust gases. The electrical current generated from each cell is drawn away with an interconnect and support structure integrated with the gas manifold. The fuel cells utilize integrated resistive heaters for efficient heating of the materials. By combining MEMS technology with thin-film deposition technology, thin-film fuel cells having microflow channels and full-integrated circuitry can be produced that will lower the operating temperature an will yield an order of magnitude greater power density than the currently known fuel cells.

Selenium Speciation and Management in Wet FGD Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Searcy, K; Richardson, M; Blythe, G

2012-02-29

This report discusses results from bench- and pilot-scale simulation tests conducted to determine the factors that impact selenium speciation and phase partitioning in wet FGD systems. The selenium chemistry in wet FGD systems is highly complex and not completely understood, thus extrapolation and scale-up of these results may be uncertain. Control of operating parameters and application of scrubber additives have successfully demonstrated the avoidance or decrease of selenite oxidation at the bench and pilot scale. Ongoing efforts to improve sample handling methods for selenium speciation measurements are also discussed. Bench-scale scrubber tests explored the impacts of oxidation air rate, tracemore » metals, scrubber additives, and natural limestone on selenium speciation in synthetic and field-generated full-scale FGD liquors. The presence and concentration of redox-active chemical species as well as the oxidation air rate contribute to the oxidation-reduction potential (ORP) conditions in FGD scrubbers. Selenite oxidation to the undesirable selenate form increases with increasing ORP conditions, and decreases with decreasing ORP conditions. Solid-phase manganese [Mn(IV)] appeared to be the significant metal impacting the oxidation of selenite to selenate. Scrubber additives were tested for their ability to inhibit selenite oxidation. Although dibasic acid and other scrubber additives showed promise in early clear liquor (sodium based and without calcium solids) bench-scale tests, these additives did not show strong inhibition of selenite oxidation in tests with higher manganese concentrations and with slurries from full-scale wet FGD systems. In bench-tests with field liquors, addition of ferric chloride at a 250:1 iron-to-selenium mass ratio sorbed all incoming selenite to the solid phase, although addition of ferric salts had no impact on native selenate that already existed in the field slurry liquor sample. As ORP increases, selenite may oxidize to selenate more rapidly than it sorbs to ferric solids. Though it was not possible to demonstrate a decrease in selenium concentrations to levels below the project'ale testing were evident at the pilot scale. Specifically, reducing oxidation air rate and ORP tends to either retain selenium as selenite in the liquor or shift selenium phase partitioning to the solid phase. Oxidation air flow rate control may be one option for managing selenium behavior in FGD scrubbers. Units that cycle load widely may find it more difficult to impact ORP conditions with oxidation air flow rate control alone. Because decreasing oxidation air rates to the reaction tank showed that all new selenium reported to the solids, the addition of ferric chloride to the pilot scrubber could not show further improvements in selenium behavior. Ferric chloride addition did shift mercury to the slurry solids, specifically to the fine particles. Several competing pathways may govern the reporting of selenium to the slurry solids: co-precipitation with gypsum into the bulk solids and sorption or co-precipitation with iron into the fine particles. Simultaneous measurement of selenium and mercury behavior suggests a holistic management strategy is best to optimize the fate of both of these elements in FGD waters. Work conducted under this project evaluated sample handling and analytical methods for selenium speciation in FGD waters. Three analytical techniques and several preservation methods were employed. Measurements of selenium speciation over time indicated that for accurate selenium speciation, it is best to conduct measurements on unpreserved, filtered samples as soon after sampling as possible. The capital and operating costs for two selenium management strategies were considered: ferric chloride addition and oxidation air flow rate control. For ferric chloride addition, as might be expected the reagent makeup costs dominate the overall costs, and range from 0.22 to 0.29 mills/kWh. For oxidation air flow rate control, a cursory comparison of capital costs and turndown capabilities for multi-stage and single-stage centrifugal blowers and several flow control methods was completed. For greenfield systems, changing the selection of blower type and flow control method may have payback periods of 4 to 5 years or more if based on energy savings alone. However, the benefits to managing redox chemistry in the scrubber could far outweigh the savings in electricity costs under some circumstances.« less

Controlled growth of semiconductor crystals

DOEpatents

Bourret-Courchesne, Edith D.

1992-01-01

A method for growth of III-V, II-VI and related semiconductor single crystals that suppresses random nucleation and sticking of the semiconductor melt at the crucible walls. Small pieces of an oxide of boron B.sub.x O.sub.y are dispersed throughout the comminuted solid semiconductor charge in the crucible, with the oxide of boron preferably having water content of at least 600 ppm. The crucible temperature is first raised to a temperature greater than the melt temperature T.sub.m1 of the oxide of boron (T.sub.m1 =723.degree. K. for boron oxide B.sub.2 O.sub.3), and the oxide of boron is allowed to melt and form a reasonably uniform liquid layer between the crucible walls and bottom surfaces and the still-solid semiconductor charge. The temperature is then raised to approximately the melt temperature T.sub.m2 of the semiconductor charge material, and crystal growth proceeds by a liquid encapsulated, vertical gradient freeze process. About half of the crystals grown have a dislocation density of less than 1000/cm.sup.2. If the oxide of boron has water content less than 600 ppm, the crucible material should include boron nitride, a layer of the inner surface of the crucible should be oxidized before the oxide of boron in the crucible charge is melted, and the sum of thicknesses of the solid boron oxide layer and liquid boron oxide layer should be at least 50 .mu.m.

Controlled growth of semiconductor crystals

DOEpatents

Bourret-Courchesne, E.D.

1992-07-21

A method is disclosed for growth of III-V, II-VI and related semiconductor single crystals that suppresses random nucleation and sticking of the semiconductor melt at the crucible walls. Small pieces of an oxide of boron B[sub x]O[sub y] are dispersed throughout the comminuted solid semiconductor charge in the crucible, with the oxide of boron preferably having water content of at least 600 ppm. The crucible temperature is first raised to a temperature greater than the melt temperature T[sub m1] of the oxide of boron (T[sub m1]=723 K for boron oxide B[sub 2]O[sub 3]), and the oxide of boron is allowed to melt and form a reasonably uniform liquid layer between the crucible walls and bottom surfaces and the still-solid semiconductor charge. The temperature is then raised to approximately the melt temperature T[sub m2] of the semiconductor charge material, and crystal growth proceeds by a liquid encapsulated, vertical gradient freeze process. About half of the crystals grown have a dislocation density of less than 1000/cm[sup 2]. If the oxide of boron has water content less than 600 ppm, the crucible material should include boron nitride, a layer of the inner surface of the crucible should be oxidized before the oxide of boron in the crucible charge is melted, and the sum of thicknesses of the solid boron oxide layer and liquid boron oxide layer should be at least 50 [mu]m. 7 figs.

75 FR 41521 - Delphi Corporation, Automotive Holding Group, Instrument Cluster Plant, Currently Known as...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

..., Automotive Holding Group, Instrument Cluster Plant, Currently Known as General Motors Corporation, Including... Corporation, Automotive Holding Group, Instrument Cluster Plant, including on-site leased workers from... Material Management working on-site at Delphi Corporation, Automotive Holding Group, Instrument Cluster...

14 CFR Special Federal Aviation... - Rules for use of portable oxygen concentrator systems on board aircraft

Code of Federal Regulations, 2011 CFR

2011-01-01

... Concentrator: means the AirSep FreeStyle, AirSep LifeStyle, Delphi RS-00400, DeVilbiss Healthcare iGo, Inogen... LifeStyle, Delphi RS-00400, DeVilbiss Healthcare iGo, Inogen One, Inogen One G2, International...

14 CFR Special Federal Aviation... - Rules for use of portable oxygen concentrator systems on board aircraft

Code of Federal Regulations, 2012 CFR

2012-01-01

... Concentrator: means the AirSep FreeStyle, AirSep LifeStyle, Delphi RS-00400, DeVilbiss Healthcare iGo, Inogen... LifeStyle, Delphi RS-00400, DeVilbiss Healthcare iGo, Inogen One, Inogen One G2, International...

The impact of the internet on community pharmacy practice: a comparison of a Delphi panel's forecast with emerging trends.

PubMed

Holmes, Erin R; Tipton, David J; Desselle, Shane P

2002-01-01

The purpose of this study was to forecast the impact of Internet pharmacy commerce on various stakeholders. A panel of experts assembled from a list of academicians in the social and administrative pharmaceutical sciences participated in a three-iteration Delphi procedure. Feedback from the aggregate responses of the panel was used to construct questionnaires employed in subsequent iterations of the Delphi. The panel converged to form a consensus upon a variety of issues. They forecasted the attainment of a 10-15% share in the market of prescription and over-the-counter pharmaceuticals through on-line purchases, the formation of strategic alliances among stakeholders in the drug distribution process, a shift in marketing strategies by brick-and-mortar stores, an increase in the prevalence of niching among pharmacy service providers and a subsequent growth in the implementation of cognitive services throughout the industry. With few exceptions, the forecast produced by the Delphi panel appears to be coming to fruition.

Using Delphi technique in a consensual curriculum for periodontics.

PubMed

Fried, Hana; Leao, Anna Thereza

2007-11-01

Periodontics has experienced several important conceptual changes in the last few decades. As such, it is important to have a periodontics curriculum built upon the expertise of specialists in that discipline and reflecting those changes. The main goal of this study was to attain a consensus, through the use of the Delphi technique, on the topics that should be included in a periodontics curriculum for undergraduate dental students. A sample of periodontics lecturers from nine dental schools in two Brazilian cities was used, and a Delphi technique approach was followed to investigate sample member perceptions on the subject. Participants received four postal mail questionnaires asking them to rate and rerate eighty-nine topics for possible inclusion in the curriculum. A descriptive analysis was conducted, and topic frequencies were calculated. Topics rated as highly important for inclusion were the following: health, ailment, prevention, etiology, epidemiology, diagnosis, and treatment. The Delphi technique approach proved successful in involving periodontics lecturers in the design of a periodontics curriculum for undergraduate dental students.

Interfacial Tension in the CaO-Al2O3-SiO2-(MgO) Liquid Slag-Solid Oxide Systems

NASA Astrophysics Data System (ADS)

Abdeyazdan, Hamed; Monaghan, Brian J.; Longbottom, Raymond J.; Rhamdhani, M. Akbar; Dogan, Neslihan; Chapman, Michael W.

2017-08-01

Interfacial phenomenon is critical in metal processing and refining. While it is known to be important, there are little data available for key oxide systems in the literature. In this study, the interfacial tension ( σ LS) of liquid slag on solid oxides (alumina, spinel, and calcium aluminate), for a range of slags in the CaO-Al2O3-SiO2-(MgO) system at 1773 K (1500 °C), has been evaluated. The results show that basic ladle-type slags exhibit lower σ LS with oxide phases examined compared to that of acid tundish-type slags. Also, within the slag types (acid and base), σ LS was observed to decrease with increasing slag basicity. A correlation between σ LS and slag structure was observed, i.e., σ LS was found to decrease linearly with increasing of slag optical basicity (Λ) and decrease logarithmically with decreasing of slag viscosity from acid to base slags. This indicated a higher σ LS as the ions in the slag become larger and more complex. Through a work of adhesion ( W) analysis, it was shown that basic ladle slags with lower σ LS result in a greater W, i.e., form a stronger bond with the solid oxide phases examined. This indicates that all other factors being equal, the efficiency of inclusion removal from steel of inclusions of similar phase to these solid oxides would be greater.

Creation and Delphi-method refinement of pediatric disaster triage simulations.

PubMed

Cicero, Mark X; Brown, Linda; Overly, Frank; Yarzebski, Jorge; Meckler, Garth; Fuchs, Susan; Tomassoni, Anthony; Aghababian, Richard; Chung, Sarita; Garrett, Andrew; Fagbuyi, Daniel; Adelgais, Kathleen; Goldman, Ran; Parker, James; Auerbach, Marc; Riera, Antonio; Cone, David; Baum, Carl R

2014-01-01

There is a need for rigorously designed pediatric disaster triage (PDT) training simulations for paramedics. First, we sought to design three multiple patient incidents for EMS provider training simulations. Our second objective was to determine the appropriate interventions and triage level for each victim in each of the simulations and develop evaluation instruments for each simulation. The final objective was to ensure that each simulation and evaluation tool was free of bias toward any specific PDT strategy. We created mixed-methods disaster simulation scenarios with pediatric victims: a school shooting, a school bus crash, and a multiple-victim house fire. Standardized patients, high-fidelity manikins, and low-fidelity manikins were used to portray the victims. Each simulation had similar acuity of injuries and 10 victims. Examples include children with special health-care needs, gunshot wounds, and smoke inhalation. Checklist-based evaluation tools and behaviorally anchored global assessments of function were created for each simulation. Eight physicians and paramedics from areas with differing PDT strategies were recruited as Subject Matter Experts (SMEs) for a modified Delphi iterative critique of the simulations and evaluation tools. The modified Delphi was managed with an online survey tool. The SMEs provided an expected triage category for each patient. The target for modified Delphi consensus was ≥85%. Using Likert scales and free text, the SMEs assessed the validity of the simulations, including instances of bias toward a specific PDT strategy, clarity of learning objectives, and the correlation of the evaluation tools to the learning objectives and scenarios. After two rounds of the modified Delphi, consensus for expected triage level was >85% for 28 of 30 victims, with the remaining two achieving >85% consensus after three Delphi iterations. To achieve consensus, we amended 11 instances of bias toward a specific PDT strategy and corrected 10 instances of noncorrelation between evaluations and simulation. The modified Delphi process, used to derive novel PDT simulation and evaluation tools, yielded a high degree of consensus among the SMEs, and eliminated biases toward specific PDT strategies in the evaluations. The simulations and evaluation tools may now be tested for reliability and validity as part of a prehospital PDT curriculum.

Cross-cultural adaptation of the delphi definitions of low back pain prevalence (German DOLBaPP).

PubMed

Leonhardt, Marja; Liebers, Falk; Dionne, Clermont E; Latza, Ute

2014-11-25

Assessed dimensions of low back pain (LBP) vary in prevalence studies. This may explain the heterogeneity in frequency estimates. To standardize definitions of LBP, an English consensus with 28 experts from 12 countries developed the "Delphi Definitions of Low Back Pain Prevalence" (DOLBaPP). The optimal definition and the shorter minimal definition with the related questionnaires for online, paper, and face-to-face use and telephone surveys are suitable for population-based studies. The definitions have to be adapted to different languages and cultures to provide comparable frequency estimates. The objective was to culturally adapt and pre-test the English definitions and corresponding Delphi DOLBaPP questionnaire forms into German. The German DOLBaPP adaptation was conducted using the systematic approach suggested by Beaton et al. A pre-test of the Delphi DOLBaPP optimal paper questionnaire including an additional evaluation form was conducted in a sample of 121 employees (mainly office workers). In order to evaluate the comprehensibility, usability, applicability, and completeness of the adapted questionnaire, response to the questionnaire and 6 closed evaluation questions were analyzed descriptively. Qualitative methods were used for the 3 open questions of the evaluation form. The cultural adaptation of the DOLBaPP for a German-speaking audience required little linguistic adaptation. Conceptual equivalence was difficult for the expression "low back pain". The expert committee considered the face validity of the pre-final version of the related Delphi DOLBaPP questionnaires as good. In the pre-test, most participants (95%) needed less than 5 minutes to fill in the optimal Delphi DOLBaPP questionnaire. They were generally positive regarding length, wording, diagram, and composition. All subjects with LBP (n=61 out of 121 - 50.4%) answered the questions on functional limitation, sciatic pain, frequency and duration of symptoms as well as pain severity. The results indicate that the cross-cultural German adaptation of the DOLBaPP Definitions and the corresponding questionnaires was successful. The definitions can be used in epidemiological studies to measure the prevalence of LBP. Some critical issues were raised regarding the general features of the Delphi DOLBaPP questionnaires. Future research is needed to evaluate these instruments.

Medication administration errors from a nursing viewpoint: a formal consensus of definition and scenarios using a Delphi technique.

PubMed

Shawahna, Ramzi; Masri, Dina; Al-Gharabeh, Rawan; Deek, Rawan; Al-Thayba, Lama; Halaweh, Masa

2016-02-01

To develop and achieve formal consensus on a definition of medication administration errors and scenarios that should or should not be considered as medication administration errors in hospitalised patient settings. Medication administration errors occur frequently in hospitalised patient settings. Currently, there is no formal consensus on a definition of medication administration errors or scenarios that should or should not be considered as medication administration errors. This was a descriptive study using Delphi technique. A panel of experts (n = 50) recruited from major hospitals, nursing schools and universities in Palestine took part in the study. Three Delphi rounds were followed to achieve consensus on a proposed definition of medication administration errors and a series of 61 scenarios representing potential medication administration error situations formulated into a questionnaire. In the first Delphi round, key contact nurses' views on medication administration errors were explored. In the second Delphi round, consensus was achieved to accept the proposed definition of medication administration errors and to include 36 (59%) scenarios and exclude 1 (1·6%) as medication administration errors. In the third Delphi round, consensus was achieved to consider further 14 (23%) and exclude 2 (3·3%) as medication administration errors while the remaining eight (13·1%) were considered equivocal. Of the 61 scenarios included in the Delphi process, experts decided to include 50 scenarios as medication administration errors, exclude three scenarios and include or exclude eight scenarios depending on the individual clinical situation. Consensus on a definition and scenarios representing medication administration errors can be achieved using formal consensus techniques. Researchers should be aware that using different definitions of medication administration errors, inclusion or exclusion of medication administration error situations could significantly affect the rate of medication administration errors reported in their studies. Consensual definitions and medication administration error situations can be used in future epidemiology studies investigating medication administration errors in hospitalised patient settings which may permit and promote direct comparisons of different studies. © 2015 John Wiley & Sons Ltd.

Sandblasting nozzle

NASA Technical Reports Server (NTRS)

Perkins, G. S.; Pawlik, E. V.; Phillips, W. M. (Inventor)

1981-01-01

A nozzle for use with abrasive and/or corrosive materials is formed of sintered ceramic compositions having high temperature oxidation resistance, high hardness and high abrasion and corrosion resistance. The ceramic may be a binary solid solution of a ceramic oxide and silicon nitride, and preferably a ternary solid solution of a ceramic oxide, silicon nitride and aluminum nitride. The ceramic oxide is selected from a group consisting of Al2O3, Y2O3 and Cr2O3, or mixtures of those compounds. Titanium carbide particles are dispersed in the ceramic mixture before sintering. The nozzles are encased for protection from external forces while in use by a metal or plastic casing.

Direct electrochemical reduction of solid uranium oxide in molten fluoride salts

NASA Astrophysics Data System (ADS)

Gibilaro, Mathieu; Cassayre, Laurent; Lemoine, Olivier; Massot, Laurent; Dugne, Olivier; Malmbeck, Rikard; Chamelot, Pierre

2011-07-01

The direct electrochemical reduction of UO 2 solid pellets was carried out in LiF-CaF 2 (+2 mass.% Li 2O) at 850 °C. An inert gold anode was used instead of the usual reactive sacrificial carbon anode. In this case, oxidation of oxide ions present in the melt yields O 2 gas evolution on the anode. Electrochemical characterisations of UO 2 pellets were performed by linear sweep voltammetry at 10 mV/s and reduction waves associated to oxide direct reduction were observed at a potential 150 mV more positive in comparison to the solvent reduction. Subsequent, galvanostatic electrolyses runs were carried out and products were characterised by SEM-EDX, EPMA/WDS, XRD and microhardness measurements. In one of the runs, uranium oxide was partially reduced and three phases were observed: nonreduced UO 2 in the centre, pure metallic uranium on the external layer and an intermediate phase representing the initial stage of reduction taking place at the grain boundaries. In another run, the UO 2 sample was fully reduced. Due to oxygen removal, the U matrix had a typical coral-like structure which is characteristic of the pattern observed after the electroreduction of solid oxides.

Solid oxide fuel cell generator with removable modular fuel cell stack configurations

DOEpatents

Gillett, J.E.; Dederer, J.T.; Zafred, P.R.; Collie, J.C.

1998-04-21

A high temperature solid oxide fuel cell generator produces electrical power from oxidation of hydrocarbon fuel gases such as natural gas, or conditioned fuel gases, such as carbon monoxide or hydrogen, with oxidant gases, such as air or oxygen. This electrochemical reaction occurs in a plurality of electrically connected solid oxide fuel cells bundled and arrayed in a unitary modular fuel cell stack disposed in a compartment in the generator container. The use of a unitary modular fuel cell stack in a generator is similar in concept to that of a removable battery. The fuel cell stack is provided in a pre-assembled self-supporting configuration where the fuel cells are mounted to a common structural base having surrounding side walls defining a chamber. Associated generator equipment may also be mounted to the fuel cell stack configuration to be integral therewith, such as a fuel and oxidant supply and distribution systems, fuel reformation systems, fuel cell support systems, combustion, exhaust and spent fuel recirculation systems, and the like. The pre-assembled self-supporting fuel cell stack arrangement allows for easier assembly, installation, maintenance, better structural support and longer life of the fuel cells contained in the fuel cell stack. 8 figs.

Solid oxide fuel cell generator with removable modular fuel cell stack configurations

DOEpatents

Gillett, James E.; Dederer, Jeffrey T.; Zafred, Paolo R.; Collie, Jeffrey C.

1998-01-01

A high temperature solid oxide fuel cell generator produces electrical power from oxidation of hydrocarbon fuel gases such as natural gas, or conditioned fuel gases, such as carbon monoxide or hydrogen, with oxidant gases, such as air or oxygen. This electrochemical reaction occurs in a plurality of electrically connected solid oxide fuel cells bundled and arrayed in a unitary modular fuel cell stack disposed in a compartment in the generator container. The use of a unitary modular fuel cell stack in a generator is similar in concept to that of a removable battery. The fuel cell stack is provided in a pre-assembled self-supporting configuration where the fuel cells are mounted to a common structural base having surrounding side walls defining a chamber. Associated generator equipment may also be mounted to the fuel cell stack configuration to be integral therewith, such as a fuel and oxidant supply and distribution systems, fuel reformation systems, fuel cell support systems, combustion, exhaust and spent fuel recirculation systems, and the like. The pre-assembled self-supporting fuel cell stack arrangement allows for easier assembly, installation, maintenance, better structural support and longer life of the fuel cells contained in the fuel cell stack.

Oxidation reactions of solid carbonaceous and resinous substances in supercritical water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koda, S.

Recent kinetic studies, particularly those by means of shadowgraphy and X-ray radiography, for supercritical water oxidation of solid carbonaceous and resinous substances have revealed the importance of the O{sub 2} mass transfer process over the intrinsic surface reaction at higher temperatures. The mass transfer processes, internal and external one, should be incorporated in designing SCWO processes for solid substances and related processes such as catalytic SCWO. Some model calculation efforts of late are briefly described. Finally, fundamental information required for future development is itemed.

Hybrid rockets - Combining the best of liquids and solids

NASA Technical Reports Server (NTRS)

Cook, Jerry R.; Goldberg, Ben E.; Estey, Paul N.; Wiley, Dan R.

1992-01-01

Hybrid rockets employing liquid oxidizer and solid fuel grain answers to cost, safety, reliability, and environmental impact concerns that have become as prominent as performance in recent years. The oxidizer-free grain has limited sensitivity to grain anomalies, such as bond-line separations, which can cause catastrophic failures in solid rocket motors. An account is presently given of the development effort associated with the AMROC commercial hybrid booster and component testing efforts at NASA-Marshall. These hybrid rockets can be fired, terminated, inspected, evaluated, and restarted for additional testing.

Application of advanced oxidation processes for cleaning of industrial water generated in wet dedusting of shaft furnace gases.

PubMed

Czaplicka, Marianna; Kurowski, Ryszard; Jaworek, Katarzyna; Bratek, Łukasz

2013-01-01

The paper presents results of studies into advanced oxidation processes in 03 and 03/UV systems. An advanced oxidation process (AOP) was conducted to reduce the load of impurities in circulating waters from wet de-dusting of shaft furnace gases. Besides inorganic impurities, i.e. mainly arsenic compounds (16 g As L(-1) on average), lead, zinc, chlorides and sulphates, the waters also contain some organic material. The organic material is composed of a complex mixture that contains, amongst others, aliphatic compounds, phenol and its derivatives, pyridine bases, including pyridine, and its derivatives. The test results show degradation of organic and inorganic compounds during ozonation and photo-oxidation processes. Analysis of the solutions from the processes demonstrated that the complex organic material in the industrial water was oxidized in ozonation and in photo-oxidation, which resulted in formation of aldehydes and carboxylic acids. Kinetic degradation of selected pollutants is presented. Obtained results indicated that the O3/UV process is more effective in degradation of organic matter than ozonation. Depending on the process type, precipitation of the solid phase was observed. The efficiency of solid-phase formation was higher in photo-oxidation with ozone. It was found that the precipitated solid phase is composed mainly of arsenic, iron and oxygen.

Cost estimation: An expert-opinion approach. [cost analysis of research projects using the Delphi method (forecasting)

NASA Technical Reports Server (NTRS)

Buffalano, C.; Fogleman, S.; Gielecki, M.

1976-01-01

A methodology is outlined which can be used to estimate the costs of research and development projects. The approach uses the Delphi technique a method developed by the Rand Corporation for systematically eliciting and evaluating group judgments in an objective manner. The use of the Delphi allows for the integration of expert opinion into the cost-estimating process in a consistent and rigorous fashion. This approach can also signal potential cost-problem areas. This result can be a useful tool in planning additional cost analysis or in estimating contingency funds. A Monte Carlo approach is also examined.

Assessment of critical thinking: a Delphi study.

PubMed

Paul, Sheila A

2014-11-01

Nurse educators are responsible for preparing nurses who critically analyze patient information and provide meaningful interventions in today's complex health care system. By using the Delphi research method, this study, utilized the specialized and experiential knowledge of Certified Nurse Educators. This original Delphi research study asked Certified Nurse Educators how to assess the critical-thinking ability of nursing students in the clinical setting. The results showed that nurse educators need time, during the clinical experience, to accurately assess each individual nursing student. This study demonstrated the need for extended student clinical time, and a variety of clinical learning assessment tools. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of advanced test methods for the improvement of production standards for ceramic powders used in solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Ward, Brian

Solid oxide fuel cells (SOFCs) are energy conversion devices that use ceramic powders as a precursor material for their electrodes. Presently, powder manufacturers are encountering complications producing consistent precursor powders. Through various thermal, chemical and physical tests, such as DSC and XRD, a preliminary production standard will be developed.

Solid oxide fuel cell systems with hot zones having improved reactant distribution

DOEpatents

Poshusta, Joseph C.; Booten, Charles W.; Martin, Jerry L.

2012-11-06

A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

Solid oxide fuel cell systems with hot zones having improved reactant distribution

DOEpatents

Poshusta, Joseph C; Booten, Charles W; Martin, Jerry L

2013-12-24

A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

Solid oxide fuel cell systems with hot zones having improved reactant distribution

DOEpatents

Poshusta, Joseph C.; Booten, Charles W.; Martin, Jerry L.

2016-05-17

A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

Reducing mode circulating fluid bed combustion

DOEpatents

Lin, Yung-Yi; Sadhukhan, Pasupati; Fraley, Lowell D.; Hsiao, Keh-Hsien

1986-01-01

A method for combustion of sulfur-containing fuel in a circulating fluid bed combustion system wherein the fuel is burned in a primary combustion zone under reducing conditions and sulfur captured as alkaline sulfide. The reducing gas formed is oxidized to combustion gas which is then separated from solids containing alkaline sulfide. The separated solids are then oxidized and recycled to the primary combustion zone.

Strain-tolerant ceramic coated seal

DOEpatents

Schienle, James L.; Strangman, Thomas E.

1994-01-01

A metallic regenerator seal is provided having multi-layer coating comprising a NiCrAlY bond layer, a yttria stabilized zirconia (YSZ) intermediate layer, and a ceramic high temperature solid lubricant surface layer comprising zinc oxide, calcium fluoride, and tin oxide. An array of discontinuous grooves is laser machined into the outer surface of the solid lubricant surface layer making the coating strain tolerant.

The Delphi: Education and Assessment in Institutional Goal Setting.

ERIC Educational Resources Information Center

Fazio, Linda S.

1985-01-01

The use of delphi techniques in a school of osteopathic medicine is described to assess and change faculty perceptions of institutional goals and needs such as curriculum orientation, campus design and location, faculty personnel policy, teaching and instructional evaluation, student characteristics and admission policies, and administrative…

Identifying Critical Issues and Problems in Technology Education Using a Modified-Delphi Technique.

ERIC Educational Resources Information Center

Wicklein, Robert C.

1993-01-01

Critical issues for technology education (TE) identified by a 25-member Delphi panel were identification of the knowledge base, curriculum development approaches, interdisciplinary approaches, and teacher education reform. Problems identified included inadequate marketing/public relations, teacher shortage, lack of content consensus, and…

Health Professionals' Perceptions of Sexual Assault Management: A Delphi Study

ERIC Educational Resources Information Center

Jancey, Jonine; Meuleners, Lynn; Phillips, Maureen

2011-01-01

Objective: To explore health professionals' perceptions of sexual assault management practices and identify issues related to these practices across Western Australia (WA). Design: A two-round electronic Delphi study was undertaken with health professionals (medical doctors, registered nurses, social workers and managers). Setting: Healthcare…

Legislative priorities for transportation safety in Virginia : a pilot application of a modified delphi technique : final report.

DOT National Transportation Integrated Search

1985-01-01

Using a modified version of the Delphi technique, a panel of transportation safety experts developed the following list of legislative priorities for submission to the Department of Motor Vehicles (DMV) Legislative Package for the 1986 session of the...

System for operating solid oxide fuel cell generator on diesel fuel

NASA Technical Reports Server (NTRS)

Singh, Prabhu (Inventor); George, Raymond A. (Inventor)

1997-01-01

A system is provided for operating a solid oxide fuel cell generator on diesel fuel. The system includes a hydrodesulfurizer which reduces the sulfur content of commercial and military grade diesel fuel to an acceptable level. Hydrogen which has been previously separated from the process stream is mixed with diesel fuel at low pressure. The diesel/hydrogen mixture is then pressurized and introduced into the hydrodesulfurizer. The hydrodesulfurizer comprises a metal oxide such as ZnO which reacts with hydrogen sulfide in the presence of a metal catalyst to form a metal sulfide and water. After desulfurization, the diesel fuel is reformed and delivered to a hydrogen separator which removes most of the hydrogen from the reformed fuel prior to introduction into a solid oxide fuel cell generator. The separated hydrogen is then selectively delivered to the diesel/hydrogen mixer or to a hydrogen storage unit. The hydrogen storage unit preferably comprises a metal hydride which stores hydrogen in solid form at low pressure. Hydrogen may be discharged from the metal hydride to the diesel/hydrogen mixture at low pressure upon demand, particularly during start-up and shut-down of the system.

Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Deangelis; Rich Depuy; Debashis Dey

2004-09-30

This report summarizes the work performed by Hybrid Power Generation Systems, LLC (HPGS) during the April to October 2004 reporting period in Task 2.3 (SOFC Scaleup for Hybrid and Fuel Cell Systems) under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL), entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. This study analyzes the performance and economics of power generation systems for central power generation application based on Solid Oxide Fuel Cell (SOFC) technology and fueled by natural gas. The main objective of this task is to develop credible scale upmore » strategies for large solid oxide fuel cell-gas turbine systems. System concepts that integrate a SOFC with a gas turbine were developed and analyzed for plant sizes in excess of 20 MW. A 25 MW plant configuration was selected with projected system efficiency of over 65% and a factory cost of under $400/kW. The plant design is modular and can be scaled to both higher and lower plant power ratings. Technology gaps and required engineering development efforts were identified and evaluated.« less

Ionic Fluorine Chemistry.

DTIC Science & Technology

SOLID ROCKET OXIDIZERS, *LIQUID ROCKET OXIDIZERS, CHLORATES, FLUORIDES, ACETONES, CHLORINE COMPOUNDS, NITROSO COMPOUNDS, *HALOGEN COMPOUNDS, ADDITION REACTIONS, CESIUM COMPOUNDS, CHLORIDES, COMPLEX COMPOUNDS

Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap through Combined Refining and Solid Oxide Membrane Electrolysis Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiaofei Guan; Peter A. Zink; Uday B. Pal

2012-01-01

Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.% Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the magnesium content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapor. The solid oxide membrane (SOM) electrolysis process is employed in themore » refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium.« less

Consulting the oracle: ten lessons from using the Delphi technique in nursing research.

PubMed

Keeney, Sinead; Hasson, Felicity; McKenna, Hugh

2006-01-01

The aim of this paper was to provide insight into the Delphi technique by outlining our personal experiences during its use over a 10-year period in a variety of applications. As a means of achieving consensus on an issue, the Delphi research method has become widely used in healthcare research generally and nursing research in particular. The literature on this technique is expanding, mainly addressing what it is and how it should be used. However, there is still much confusion and uncertainty surrounding it, particularly about issues such as modifications, consensus, anonymity, definition of experts, how 'experts' are selected and how non-respondents are pursued. This issues that arise when planning and carrying out a Delphi study include the definition of consensus; the issue of anonymity vs. quasi-anonymity for participants; how to estimate the time needed to collect the data, analyse each 'round', feed back results to participants, and gain their responses to this feedback; how to define and select the 'experts' who will be asked to participate; how to enhance response rates; and how many 'rounds' to conduct. Many challenges and questions are raised when using the Delphi technique, but there is no doubt that it is an important method for achieving consensus on issues where none previously existed. Researchers need to adapt the method to suit their particular study.

A delphi study on health in future India.

PubMed

Rohatgi, K; Rohatgi, P K

1980-07-01

A delphi study was conducted to identify or envision health scenarios in India by the year 2000. Questionnaires consisting of 48 questions on 5 areas (diagnosis and therapy; family planning; pharmaceuticals and drugs; biochemical and biomedical research; health services) were mailed to 250 experts in India. 36 responded. Results were compiled and mailed back to the respondents for changes and comments. 17 people responded. Results of the delphi study shows that policy decisions with respect to compulsory family planning as well as health education at secondary school level will precede further breakthroughs in birth control technology. Non operation reversible sterilization procedures, immunological birth control, Ayurvedic medicines for contraception and abortion, and selection of baby's sex are all possible by 2000 thereafter. Complete eradication of infectious diseases, malnutrition and associated diseases is considered unlikely before 2000, as are advances in biomedical research. Changes in health services (e.g., significant increases in hospital beds and doctors, cheap bulk drugs), particularly in rural areas, are imminent, leading to prolonging of life expectancy to 70 years. Genetic engineering may provide significant breakthroughs in the prevention of malignancies and cardiac disorders. The India delphi study is patterned after a similar delphi study conducted in the U.S. by Smith, Kline and French (SKF) Laboratories in 1968. The SKF study was able to predict some breakthroughs with basic research which have been realized.

[Delphi study to identify the management skills of nursing executives].

PubMed

Yañez, M R; Avila, J A; Bermudez, M I; De Miguel, I; Bellver, V; Guilabert, M; Mira, J J

2016-01-01

To determine and update the skills map for the position of Nurse Administrator in hospitals and Primary Care. An observational, descriptive, cross-sectional study based on a Delphi technique was conducted in hospital and Primary Care settings. Two nominal groups with 15 nurses each were used to define the contents of the questionnaire 0 in the Delphi technique. All nurses registered in the professional associations of Alicante, Castellón and Valencia were invited to participate. The results of the Delphi study was submitted to factor analysis to identify the set of skills and, subsequently, compare them with the offer of post-graduate course in colleges and universities during the 2014-15 academic year. Forty-five competences were extracted during the Nominal groups. In total, 705 nurses replied to the first wave in the Delphi Technique, and 394 in the second (response rate of 56%). Factorial analysis grouped the skills chosen into 10 factors: managing people, conflict management, independent learning, ethics, emotional balance, commitment, self-discipline, continuous improvement, critical-thinking, and innovation. Four skills groups identified in this study (emotional balancing, commitment, self-discipline and courage) were not usually included in the post-graduate courses The nurse administrator skills should be related to relational and ethical behaviour. The training offer of the post-graduate courses must be reoriented. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

The transculturality of 'gut feelings'. Results from a French Delphi consensus survey.

PubMed

Le Reste, Jean-Yves; Coppens, Magali; Barais, Marie; Nabbe, Patrice; Le Floch, Bernard; Chiron, Benoît; Dinant, Geert Jan; Berkhout, Christophe; Stolper, Erik; Barraine, Pierre

2013-12-01

General Practitioners (GPs) sometimes base their clinical decisions on 'gut feelings.' Research into the significance of this phenomenon with focus groups and a Delphi consensus procedure in the Netherlands provided a concept of 'gut feelings:' a sense of alarm, a sense of reassurance and several determinants. The transculturality of 'gut feelings' has been examined briefly until now as the issue is complex. To determine whether a consensus on 'gut feelings' in general practice in France could be obtained. Using a similar Delphi consensus procedure and the same six initial statements as in the Netherlands, and compare the French results with the seven final Dutch consensual statements. Qualitative research, including a Delphi consensus procedure after a forward-backward translation (FBT) of the initial Dutch statements of 'gut feelings.' A heterogeneous sample of 34 French expert GPs participated. FBT of the final French statements was undertaken for a content comparison with the Dutch. After three Delphi rounds, French GPs reached agreement on nine statements. Many similarities have been found between the Dutch and the French defining statements, with reservations concerning the 'sense of reassurance,' which French GPs seemed to feel more cautious about. 'Gut feelings' are a well-defined concept in France too. The Dutch and the French consensual statements seem very close. The transculturality of the concept is confirmed, which is a new indicator that 'gut feelings' are a self-contained concept.

Generator configuration for solid oxide fuel cells

DOEpatents

Reichner, Philip

1989-01-01

Disclosed are improvements in a solid oxide fuel cell generator 1 having a multiplicity of electrically connected solid oxide fuel cells 2, where a fuel gas is passed over one side of said cells and an oxygen-containing gas is passed over the other side of said cells resulting in the generation of heat and electricity. The improvements comprise arranging the cells in the configuration of a circle, a spiral, or folded rows within a cylindrical generator, and modifying the flow rate, oxygen concentration, and/or temperature of the oxygen-containing gases that flow to those cells that are at the periphery of the generator relative to those cells that are at the center of the generator. In these ways, a more uniform temperature is obtained throughout the generator.

An afterburner-powered methane/steam reformer for a solid oxide fuel cells application

NASA Astrophysics Data System (ADS)

Mozdzierz, Marcin; Chalusiak, Maciej; Kimijima, Shinji; Szmyd, Janusz S.; Brus, Grzegorz

2018-04-01

Solid oxide fuel cell (SOFC) systems can be fueled by natural gas when the reforming reaction is conducted in a stack. Due to its maturity and safety, indirect internal reforming is usually used. A strong endothermic methane/steam reforming process needs a large amount of heat, and it is convenient to provide thermal energy by burning the remainders of fuel from a cell. In this work, the mathematical model of afterburner-powered methane/steam reformer is proposed. To analyze the effect of a fuel composition on SOFC performance, the zero-dimensional model of a fuel cell connected with a reformer is formulated. It is shown that the highest efficiency of a solid oxide fuel cell is achieved when the steam-to-methane ratio at the reforming reactor inlet is high.

Direct ethanol solid oxide fuel cell operating in gradual internal reforming

NASA Astrophysics Data System (ADS)

Nobrega, S. D.; Galesco, M. V.; Girona, K.; de Florio, D. Z.; Steil, M. C.; Georges, S.; Fonseca, F. C.

2012-09-01

An electrolyte supported solid oxide fuel cell (SOFC) using standard electrodes, doped-lanthanum manganite cathode and Ni-cermet anode, was operated with direct (anhydrous) ethanol for more than 100 h, delivering essentially the same power output as running on hydrogen. A ceria-based layer provides the catalytic activity for the gradual internal reforming, which uses the steam formed by the electrochemical oxidation of hydrogen for the decomposition of ethanol. Such a concept opens up the way for multi-fuel SOFCs using standard components and a catalytic layer.

Method of making sulfur tolerant composite cermet electrodes for solid oxide electrochemical cells

DOEpatents

Isenberg, Arnold O.

1989-01-01

An electrochemical apparatus is made containing an exterior electorde bonded to the exterior of a tubular, solid, oxygen ion conducting electrolyte where the electrolyte is also in contact with an interior electrode, said exterior electrode comprising particles of an electronic conductor contacting the electrolyte, where a ceramic metal oxide coating partially surrounds the particles and is bonded to the electrolyte, and where a coating of an ionic-electronic conductive material is attached to the ceramic metal oxide coating and to the exposed portions of the particles.

Sulfur tolerant composite cermet electrodes for solid oxide electrochemical cells

DOEpatents

Isenberg, Arnold O.

1987-01-01

An electrochemical apparatus is made containing an exterior electrode bonded to the exterior of a tubular, solid, oxygen ion conducting electrolyte where the electrolyte is also in contact with an interior electrode, said exterior electrode comprising particles of an electronic conductor contacting the electrolyte, where a ceramic metal oxide coating partially surrounds the particles and is bonded to the electrolyte, and where a coating of an ionic-electronic conductive material is attached to the ceramic metal oxide coating and to the exposed portions of the particles.

Investigation of solid organic waste processing by oxidative pyrolysis

NASA Astrophysics Data System (ADS)

Kolibaba, O. B.; Sokolsky, A. I.; Gabitov, R. N.

2017-11-01

A thermal analysis of a mixture of municipal solid waste (MSW) of the average morphological composition and its individual components was carried out in order to develop ways to improve the efficiency of its utilization for energy production in thermal reactors. Experimental studies were performed on a synchronous thermal analyzer NETZSCH STA 449 F3 Jupiter combined with a quadrupole mass spectrometer QMC 403. Based on the results of the experiments, the temperature ranges of the pyrolysis process were determined as well as the rate of decrease of the mass of the sample of solid waste during the drying and oxidative pyrolysis processes, the thermal effects accompanying these processes, as well as the composition and volumes of gases produced during oxidative pyrolysis of solid waste and its components in an atmosphere with oxygen content of 1%, 5%, and 10%. On the basis of experimental data the dependences of the yield of gas on the moisture content of MSW were obtained under different pyrolysis conditions under which a gas of various calorific values was produced.

Study of ceria-carbonate nanocomposite electrolytes for low-temperature solid oxide fuel cells.

PubMed

Fan, L; Wang, C; Di, J; Chen, M; Zheng, J; Zhu, B

2012-06-01

Composite and nanocomposite samarium doped ceria-carbonates powders were prepared by solid-state reaction, citric acid-nitrate combustion and modified nanocomposite approaches and used as electrolytes for low temperature solid oxide fuel cells. X-ray Diffraction, Scanning Electron Microscope, low-temperature Nitrogen Adsorption/desorption Experiments, Electrochemical Impedance Spectroscopy and fuel cell performance test were employed in characterization of these materials. All powders are nano-size particles with slight aggregation and carbonates are amorphous in composites. Nanocomposite electrolyte exhibits much lower impedance resistance and higher ionic conductivity than those of the other electrolytes at lower temperature. Fuel cell using the electrolyte prepared by modified nanocomposite approach exhibits the best performance in the whole operation temperature range and achieves a maximum power density of 839 mW cm(-2) at 600 degrees C with H2 as fuel. The excellent physical and electrochemical performances of nanocomposite electrolyte make it a promising candidate for low-temperature solid oxide fuel cells.

Computer Technology and Education: A Policy Delphi.

ERIC Educational Resources Information Center

Steier, Lloyd P.

Realizing the educational potential of computer technology largely depends on developing appropriate policies related to the technology. A Policy Delphi method was used to identify changes in education that are both probable and possible on account of the introduction of computers, and to explore potential patterns for arriving at a desired…

Electronic-Imen-Delphi (EID): An Online Conferencing Procedure.

ERIC Educational Resources Information Center

Passig, David; Sharbat, Aviva

2000-01-01

Examines the efficiency of the Imen-Delphi (ID) technique as an electronic procedure for conferencing that helps participants clarify their opinions and expectations regarding preferable and possible futures. Describes an electronic version of the original ID procedure and tested its efficiency among a group of experts on virtual reality and…

Identifying Dispositions That Matter: Reaching for Consensus Using a Delphi Study

ERIC Educational Resources Information Center

Bair, Mary Antony

2017-01-01

This article describes how one institution used the Delphi technique to identify and operationalize key professional dispositions to be addressed in its teacher education program. Participants included teacher educators, methods course instructors, and school administrators. Data collection occurred in three phases, with the results of each phase…

A Delphi Survey on Citizenship Education in Asean Countries: Findings for Brunei

ERIC Educational Resources Information Center

Salleh, Hajah Sallimah Haji Mohammed; Laxman, Kumar; Jawawi, Rosmawijah

2015-01-01

The aim of the Delphi Survey was to elucidate Bruneian Education experts' responses to five questions regarding their knowledge and understanding of the charateristics of citizenship education viz. Environment, Coexistence, Culture, Social Justice and Equity, Democracy, Sustainable Development, Interdependence, Foreign Language, Social Welfare,…

Delphi Research Methodology Applied to Place-Based Watershed Education

ERIC Educational Resources Information Center

Vallor, Rosanna R.; Yates, Kimberly A.; Brody, Michael

2016-01-01

This research focuses on the results of the Flathead Watershed Delphi survey, a consensus-building methodology used to establish foundational knowledge, skills and dispositions for the Flathead Watershed Educators Guide, a place-based watershed curriculum for middle school grades based on the Flathead Watershed Sourcebook. Survey participants (n =…

Factors Influencing Continuing Professional Development: A Delphi Study among Nursing Experts

ERIC Educational Resources Information Center

Brekelmans, Gerard; Poell, Rob F.; van Wijk, Kees

2013-01-01

Purpose: The aim of this paper is to present an inventory of expert opinions on the factors that influence the participation of registered nurses in continuing professional development (CPD) activities. Design/methodology/approach: A Delphi study was conducted among 38 Dutch experts (nursing employers, managers, education institutions, and…

Using Delphi Methodology to Design Assessments of Teachers' Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Manizade, Agida Gabil; Mason, Marguerite M.

2011-01-01

Descriptions of methodologies that can be used to create items for assessing teachers' "professionally situated" knowledge are lacking in mathematics education research literature. In this study, researchers described and used the Delphi method to design an instrument to measure teachers' pedagogical content knowledge. The instrument focused on a…

The Delphi Method in Rehabilitation Counseling Research

ERIC Educational Resources Information Center

Vazquez-Ramos, Robinson; Leahy, Michael; Estrada Hernandez, Noel

2007-01-01

Rehabilitation researchers have found in the application of the Delphi method a more sophisticated way of obtaining consensus from experts in the field on certain matters. The application of this research methodology has affected and certainly advanced the body of knowledge of the rehabilitation counseling practice. However, the rehabilitation…

Competencies for Leaders of Volunteers During the Next Decade: A National Delphi Study.

ERIC Educational Resources Information Center

Boyd, Barry L.

Using the Delphi technique, a nationwide panel of experts identified 33 competencies that volunteer administrators (VAs) will need during the next decade and categorized them into these five constructs: organizational leadership; systems leadership; organizational culture; personal skills; and management skills. Twelve barriers to acquiring the…

Updating the School Counseling Research Agenda: A Delphi Study

ERIC Educational Resources Information Center

Villares, Elizabeth; Dimmitt, Carey

2017-01-01

The authors updated an earlier Delphi study identifying the research priorities for school counseling (Dimmitt et al., 2005). A 29-member expert panel selected research questions from the prior study, generated new questions, and rank ordered the combined set. The results provide guidance for prioritizing dissertation topics, targeting future…

A Delphi Study of Agriculture Teacher Perceptions of Problems in Student Retention.

ERIC Educational Resources Information Center

Dyer, James E.; Breja, Lisa M.; Ball, Anna L.

2003-01-01

A four-round Delphi study of secondary agriculture teachers (17, 17, 22, and 21 responses) identified and rated student retention problems. Consensus was reached on these items: scheduling difficulties, lack of counselor support, image, increased graduation requirements, college entrance requirements, competition from other activities, block…

78 FR 48467 - Delphi Automotive Systems, LLC, Products and Service Solutions Division, Including On-Site Leased...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... amending this certification to include all workers of Delphi Automotive Systems, LLC, Product and Service..., LLC, Products and Service Solutions Division, Including On-Site Leased Workers From Bartech Workforce Management, Kokomo, Indiana; Amended Certification Regarding Eligibility To Apply for Worker Adjustment...

Co-Creating Nano-Imaginaries: Report of a Delphi-Exercise

ERIC Educational Resources Information Center

Deblonde, Marian; Van Oudheusden, Michiel; Evers, Johan; Goorden, Lieve

2008-01-01

In the first phase of the research project Nanotechnologies for Tomorrow's Society (www.nanosoc.be), the research consortium explored a variety of futuristic visions or technoscientific imaginaries. This exploration took the form of a Policy Delphi, adapted to the particular objective of jointly constructing nano-imaginaries, taking participants'…

Assessment Leaders' Perspectives of Institutional Cultures of Assessment: A Delphi Study

ERIC Educational Resources Information Center

Fuller, Matthew; Henderson, Susan; Bustamante, Rebecca

2015-01-01

Institutional cultures of assessment are praised as beneficial to student learning. Yet, extant studies have not explored the theoretical foundations and pragmatic approaches to shaping cultures of assessment. The researchers used the Delphi method to explore 10 higher education assessment leaders' attitudes and theoretical perspectives regarding…

Cross platform development using Delphi and Kylix

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, J.L.; Nishimura, H.; Timossi, C.

2002-10-08

A cross platform component for EPICS Simple Channel Access (SCA) has been developed for the use with Delphi on Windows and Kylix on Linux. An EPICS controls GUI application developed on Windows runs on Linux by simply rebuilding it, and vice versa. This paper describes the technical details of the component.

Single-Parent Nontraditional Students: Faculty Support within the Classroom Environment

ERIC Educational Resources Information Center

Allen-Drewry, Lisa M.

2017-01-01

Purpose: The purpose of this Delphi study was to explore single-parent nontraditional student experiences within nontraditional university classroom environments and to determine methods for providing better support within the classroom setting. Methodology: The Delphi technique was conducted through 3 survey rounds to explore ways professors and…

Identifying Competencies for Volunteer Administrators for the Coming Decade: A National Delphi Study.

ERIC Educational Resources Information Center

Boyd, Barry L.

2003-01-01

A Delphi panel of 13 experts categorized 33 competencies for volunteer administration into 5 constructs: organizational leadership, systems leadership, organizational culture, personal skills, and management skills. Twelve barriers to acquiring competencies and 21 methods to address them were identified. (Contains 24 references.) (SK)

Use of the Delphi method for determining community growth goals inventory: the Nashville experience

Treesearch

Vishwa K. Varma

1977-01-01

The author discusses the growth-inducing pressures on Nashville, Tennessee, describes the application of the Delphi technique to develop an inventory of the community's growth goals, and suggests that the development of a list of community goals is a necessary first step toward growth management.

A Delphi Study and Initial Validation of Counselor Supervision Competencies

ERIC Educational Resources Information Center

Neuer Colburn, Anita A.; Grothaus, Tim; Hays, Danica G.; Milliken, Tammi

2016-01-01

The authors addressed the lack of supervision training standards for doctoral counseling graduates by developing and validating an initial list of supervision competencies. They used content analysis, Delphi polling, and content validity methods to generate a list, vetted by 2 different panels of supervision experts, of 33 competencies grouped…

Oxidation behaviour and electrical properties of cobalt/cerium oxide composite coatings for solid oxide fuel cell interconnects

NASA Astrophysics Data System (ADS)

Harthøj, Anders; Holt, Tobias; Møller, Per

2015-05-01

This work evaluates the performance of cobalt/cerium oxide (Co/CeO2) composite coatings and pure Co coatings to be used for solid oxide fuel cell (SOFC) interconnects. The coatings are electroplated on the ferritic stainless steels Crofer 22 APU and Crofer 22H. Coated and uncoated samples are exposed in air at 800 °C for 3000 h and oxidation rates are measured and oxide scale microstructures are investigated. Area-specific resistances (ASR) in air at 850 °C of coated and uncoated samples are also measured. A dual layered oxide scale formed on all coated samples. The outer layer consisted of Co, Mn, Fe and Cr oxide and the inner layer consisted of Cr oxide. The CeO2 was present as discrete particles in the outer oxide layer after exposure. The Cr oxide layer thicknesses and oxidations rates were significantly reduced for Co/CeO2 coated samples compared to for Co coated and uncoated samples. The ASR of all Crofer 22H samples increased significantly faster than of Crofer 22 APU samples which was likely due to the presence of SiO2 in the oxide/metal interface of Crofer 22H.

Charge and discharge characteristics of lithium-ion graphite electrodes in solid-state cells

NASA Astrophysics Data System (ADS)

Lemont, S.; Billaud, D.

Lithium ions have been electrochemically intercalated into graphite in solid-state cells operating with solid polymer electrolytes based on poly(ethylene oxide) (PEO) complexed with lithium perchlorate (LiClO 4). The working composite electrode is composed of active-divided natural graphite associated with P(EO) 8-LiClO 4 acting as a binder and a Li + ionic conductor. Intercalation and de-intercalation of Li + were performed using galvanostatic or voltammetry techniques. The curves obtained in our solid-state cells were compared with those performed in liquid ethylene carbonate-LiClO 4 electrolyte. It is shown that in solid-state cells, side reactions occur both in the reduction and in the oxidation processes which leads to some uncertainty in the determination of the maximum reversible capacity of the graphite material.

LABORATORY STUDY ON THE OXIDATION OF ARSENIC III TO ARSENIC V

EPA Science Inventory

A one-year laboratory study was performed to determine the ability of seven oxidants to oxidize As(III) to As(V). These included chlorine, permanganate, ozone, chlorine dioxide, monochloramine, a solid-phase oxidizing media, and 254 nm ultraviolet light. Chlorine and permanganate...

Polymer blends for use in photoelectrochemical cells for conversion of solar energy to electricity

DOEpatents

Skotheim, Terje

1986-01-01

There is disclosed a polymer blend of a highly conductive polymer and a solid polymer electrolyte that is designed to achieve better charge transfer across the conductive film/polymer electrolyte interface of the electrochemical photovoltaic cell. The highly conductive polymer is preferably polypyrrole or poly-N-p-nitrophenylpyrrole and the solid polymer electrolyte is preferably polyethylene oxide or polypropylene oxide.

Polymer blends for use in photoelectrochemical cells for conversion of solar energy to electricity

DOEpatents

Skotheim, T.

1984-09-28

There is disclosed a polymer blend of a highly conductive polymer and a solid polymer electrolyte that is designed to achieve better charge transfer across the conductive film/polymer electrolyte interface of the electrochemical photovoltaic cell. The highly conductive polymer is preferably polypyrrole or poly-N-p-nitrophenylpyrrole and the solid polymer electrolyte is preferably polyethylene oxide or polypropylene oxide.

Nanoscale science and engineering forum (706c) design of solid lipid particles with iron oxide quantum dots for the delivery of therapeutic agents

USDA-ARS?s Scientific Manuscript database

Solid lipid particles provide a method to encapsulate and control the release of drugs in vivo but lack the imaging capability provided by CdS quantum dots. This shortcoming was addressed by combining these two technologies into a model system that uses iron oxide as a non-toxic imaging component in...

An Aurivillius Oxide Based Cathode with Excellent CO2 Tolerance for Intermediate-Temperature Solid Oxide Fuel Cells.

PubMed

Zhu, Yinlong; Zhou, Wei; Chen, Yubo; Shao, Zongping

2016-07-25

The Aurivillius oxide Bi2 Sr2 Nb2 MnO12-δ (BSNM) was used as a cobalt-free cathode for intermediate-temperature solid oxide fuel cells (IT-SOFCs). To the best of our knowledge, the BSNM oxide is the only alkaline-earth-containing cathode material with complete CO2 tolerance that has been reported thus far. BSNM not only shows favorable activity in the oxygen reduction reaction (ORR) at intermediate temperatures but also exhibits a low thermal expansion coefficient, excellent structural stability, and good chemical compatibility with the electrolyte. These features highlight the potential of the new BSNM material as a highly promising cathode material for IT-SOFCs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Method and system for the removal of oxides of nitrogen and sulfur from combustion processes

DOEpatents

Walsh, John V.

1987-12-15

A process for removing oxide contaminants from combustion gas, and employing a solid electrolyte reactor, includes: (a) flowing the combustion gas into a zone containing a solid electrolyte and applying a voltage and at elevated temperature to thereby separate oxygen via the solid electrolyte, (b) removing oxygen from that zone in a first stream and removing hot effluent gas from that zone in a second stream, the effluent gas containing contaminant, (c) and pre-heating the combustion gas flowing to that zone by passing it in heat exchange relation with the hot effluent gas.

Ion irradiation of the native oxide/silicon surface increases the thermal boundary conductance across aluminum/silicon interfaces

NASA Astrophysics Data System (ADS)

Gorham, Caroline S.; Hattar, Khalid; Cheaito, Ramez; Duda, John C.; Gaskins, John T.; Beechem, Thomas E.; Ihlefeld, Jon F.; Biedermann, Laura B.; Piekos, Edward S.; Medlin, Douglas L.; Hopkins, Patrick E.

2014-07-01

The thermal boundary conductance across solid-solid interfaces can be affected by the physical properties of the solid boundary. Atomic composition, disorder, and bonding between materials can result in large deviations in the phonon scattering mechanisms contributing to thermal boundary conductance. Theoretical and computational studies have suggested that the mixing of atoms around an interface can lead to an increase in thermal boundary conductance by creating a region with an average vibrational spectra of the two materials forming the interface. In this paper, we experimentally demonstrate that ion irradiation and subsequent modification of atoms at solid surfaces can increase the thermal boundary conductance across solid interfaces due to a change in the acoustic impedance of the surface. We measure the thermal boundary conductance between thin aluminum films and silicon substrates with native silicon dioxide layers that have been subjected to proton irradiation and post-irradiation surface cleaning procedures. The thermal boundary conductance across the Al/native oxide/Si interfacial region increases with an increase in proton dose. Supported with statistical simulations, we hypothesize that ion beam mixing of the native oxide and silicon substrate within ˜2.2nm of the silicon surface results in the observed increase in thermal boundary conductance. This ion mixing leads to the spatial gradation of the silicon native oxide into the silicon substrate, which alters the acoustic impedance and vibrational characteristics at the interface of the aluminum film and native oxide/silicon substrate. We confirm this assertion with picosecond acoustic analyses. Our results demonstrate that under specific conditions, a "more disordered and defected" interfacial region can have a lower resistance than a more "perfect" interface.

Formation of self-organized nanoporous anodic oxide from metallic gallium.

PubMed

Pandey, Bipin; Thapa, Prem S; Higgins, Daniel A; Ito, Takashi

2012-09-25

This paper reports the formation of self-organized nanoporous gallium oxide by anodization of solid gallium metal. Because of its low melting point (ca. 30 °C), metallic gallium can be shaped into flexible structures, permitting the fabrication of nanoporous anodic oxide monoliths within confined spaces like the inside of a microchannel. Here, solid gallium films prepared on planar substrates were employed to investigate the effects of anodization voltage (1, 5, 10, 15 V) and H(2)SO(4) concentration (1, 2, 4, 6 M) on anodic oxide morphology. Self-organized nanopores aligned perpendicular to the film surface were obtained upon anodization of gallium films in ice-cooled 4 and 6 M aqueous H(2)SO(4) at 10 and 15 V. Nanopore formation could be recognized by an increase in anodic current after a current decrease reflecting barrier oxide formation. The average pore diameter was in the range of 18-40 nm with a narrow diameter distribution (relative standard deviation ca. 10-20%), and was larger at lower H(2)SO(4) concentration and higher applied voltage. The maximum thickness of nanoporous anodic oxide was ca. 2 μm. In addition, anodic formation of self-organized nanopores was demonstrated for a solid gallium monolith incorporated at the end of a glass capillary. Nanoporous anodic oxide monoliths formed from a fusible metal will lead to future development of unique devices for chemical sensing and catalysis.

Zinc oxide crystal whiskers as a novel sorbent for solid-phase extraction of flavonoids.

PubMed

Wang, Licheng; Shangguan, Yangnan; Hou, Xiudan; Jia, Yong; Liu, Shujuan; Sun, Yingxin; Guo, Yong

2017-08-15

As a novel solid-phase extraction material, zinc oxide crystal whiskers were used to extract flavonoid compounds and showed good extraction abilities. X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy and surface area/pore volume characterized the sorbent. The zinc oxide was packed into a solid-phase extraction micro-column and its extraction ability was evaluated by four model flavonoid compounds. The sample loading and elution parameters were optimized and the zinc oxide based analytical method for flavonoids was established. It showed that the method has wide linearities from 1 to 150μg/L and low limits of detection at 0.25μg/L. The relative standard deviations of a single column repeatability and column to column reproducibility were less than 6.8% and 10.6%. Several real samples were analyzed by the established method and satisfactory results were obtained. The interactions between flavonoids and zinc oxide were calculated and proved to be from the Van der Waals' forces between the 4p and 5d orbitals from zinc atom and the neighboring π orbitals from flavonoid phenyl groups. Moreover, the zinc oxide crystal whiskers showed good stability and could be reused more than 50 times under the operation conditions. This work proves that the zinc oxide crystal whiskers are a good candidate for flavonoids enrichment. Copyright © 2017. Published by Elsevier B.V.

Respiration of metal (hydr)oxides by Shewanella and Geobacter: a key role for multihaem c-type cytochromes

PubMed Central

Shi, Liang; Squier, Thomas C; Zachara, John M; Fredrickson, James K

2007-01-01

Dissimilatory reduction of metal (e.g. Fe, Mn) (hydr)oxides represents a challenge for microorganisms, as their cell envelopes are impermeable to metal (hydr)oxides that are poorly soluble in water. To overcome this physical barrier, the Gram-negative bacteria Shewanella oneidensis MR-1 and Geobacter sulfurreducens have developed electron transfer (ET) strategies that require multihaem c-type cytochromes (c-Cyts). In S. oneidensis MR-1, multihaem c-Cyts CymA and MtrA are believed to transfer electrons from the inner membrane quinone/quinol pool through the periplasm to the outer membrane. The type II secretion system of S. oneidensis MR-1 has been implicated in the reduction of metal (hydr)oxides, most likely by translocating decahaem c-Cyts MtrC and OmcA across outer membrane to the surface of bacterial cells where they form a protein complex. The extracellular MtrC and OmcA can directly reduce solid metal (hydr)oxides. Likewise, outer membrane multihaem c-Cyts OmcE and OmcS of G. sulfurreducens are suggested to transfer electrons from outer membrane to type IV pili that are hypothesized to relay the electrons to solid metal (hydr)oxides. Thus, multihaem c-Cyts play critical roles in S. oneidensis MR-1- and G. sulfurreducens-mediated dissimilatory reduction of solid metal (hydr)oxides by facilitating ET across the bacterial cell envelope. PMID:17581116

Current and Emerging Ethical Issues in Counseling: A Delphi Study of Expert Opinions

ERIC Educational Resources Information Center

Herlihy, Barbara; Dufrene, Roxane L.

2011-01-01

A Delphi study was conducted to ascertain the opinions of panel experts regarding the most important current and emerging ethical issues facing the counseling profession. Expert opinions on ethical issues in counselor preparation also were sought. Eighteen panelists responded to 3 rounds of data collection interspersed with feedback. Themes that…

Workplace Issues in Extension--A Delphi Study of Extension Educators

ERIC Educational Resources Information Center

Kroth, Michael; Peutz, Joey

2011-01-01

Using the Delphi technique, expert Extension educators identified and prioritized those workplace issues they believe will be the most important to attract, motivate, and retain Extension educators/agents over the next 5 to 7 years. Obtaining and then utilizing a talented, highly motivated workforce during a period when many will be retiring will…

Supervising Counsellors and Psychotherapists Who Work with Trauma: A Delphi Study

ERIC Educational Resources Information Center

West, Angela

2010-01-01

In this study the Delphi technique was used to identify the main supervision issues that require attention and consideration when supervising counsellors and psychotherapists working with trauma. A panel of supervisors, who were additionally experienced in working with trauma in adulthood, completed a series of three questionnaires comprising two…

Future Directions for Business Education: A Delphi Study

ERIC Educational Resources Information Center

Kesten, Cyril A.; Lambrecht, Judith J.

2010-01-01

Purpose: The purpose of this study was to synthesize perceptions from the field about current issues and to propose future directions for the field of business education. Method: A modified three-stage Delphi study was carried out with business educators who attended national conferences and/or belonged to national professional organizations.…

Towards an Understanding of Instructional Design Heuristics: An Exploratory Delphi Study

ERIC Educational Resources Information Center

York, Cindy S.; Ertmer, Peggy A.

2011-01-01

Evidence suggests that experienced instructional designers often use heuristics and adapted models when engaged in the instructional design problem-solving process. This study used the Delphi technique to identify a core set of heuristics designers reported as being important to the success of the design process. The overarching purpose of the…

The Conduct of Socially Valid Investigation by Culturally Diverse Researchers: A Delphi Study

ERIC Educational Resources Information Center

Dutta, Alo; Kundu, Madan; Chan, Fong

2010-01-01

Minority researchers have traditionally exhibited a need for and interest in investigating non-mainstream issues involving diverse communities. Since faculty at colleges and universities within the United States are largely Caucasian, research on issues relevant to marginalized groups is lacking. This three-stage Delphi study was designed to…

Development of a School Nursing Research Agenda in Florida: A Delphi Study

ERIC Educational Resources Information Center

Gordon, Shirley C.; Barry, Charlotte D.

2006-01-01

Research is important to the image, visibility, and viability of school nursing. Each state school nursing association should evaluate member commitment to school nursing research based on their unique set of financial, educational, and organizational resources. A 3-round Delphi study was conducted in which Florida school nurses identified…

Identifying the Professional Development Needs of Adjunct Faculty Using an Online Delphi

ERIC Educational Resources Information Center

Cuddie, Stephani B.

2016-01-01

The purpose of this online Delphi was to explore the professional development needs and preferences of adjunct faculty, specifically those who teach online. The study involved adjunct faculty who were categorized by their self-selected type of adjunct faculty member: specialist, aspiring academic, professional/freelancer, and career-ender. Through…

Helping Competencies of Student Affairs Professionals: A Delphi Study

ERIC Educational Resources Information Center

Reynolds, Amy L.

2011-01-01

The purpose of this study was to gather student affairs professionals' perceptions of the knowledge and skills needed to effectively help students. Using the Delphi method, 159 entry-level and mid-level student affairs administrators from institutions across the United States were surveyed regarding their perceptions of the helping skills they use…

The Policy Delphi: A Method for Identifying Intended and Unintended Consequences of Educational Policy

ERIC Educational Resources Information Center

Manley, R. Adam

2013-01-01

This article highlights a rarely utilized but effective technique for identifying intended and unintended consequences of past or current policy or policy change. The author guides the reader through the process of identifying potential participants, contacting participants, developing the policy Delphi instrument, and analyzing the findings by…

Achieving Next Generation Science Standards through Agricultural Contexts: A Delphi Study of Outdoor Education Experts

ERIC Educational Resources Information Center

Meals, Anthony; Washburn, Shannon

2015-01-01

A Delphi survey was conducted with 30 outdoor education experts in Kansas. Participant responses helped frame a Kansas definition of outdoor education and identified essential educational goals and outcomes, critical components for effective outdoor education programming, and barriers facing outdoor education in Kansas. The study highlights…

Rehabilitation Counselor Competencies When Working With Hispanic/Latino Immigrant Injured Workers: A Delphi Study

ERIC Educational Resources Information Center

Santos Román, Leslie M.; Estrada-Hernández, Noel

2017-01-01

Purpose: To explore and identify attitudes, knowledge, and skills rehabilitation practitioners in the private sector need when working with Hispanic/Latino immigrant injured workers. Methods: This study employed a 3-round Delphi study to obtain a consensus of 8 rehabilitation practitioners who had experience and expertise working with…

Incorporating Nonparametric Statistics into Delphi Studies in Library and Information Science

ERIC Educational Resources Information Center

Ju, Boryung; Jin, Tao

2013-01-01

Introduction: The Delphi technique is widely used in library and information science research. However, many researchers in the field fail to employ standard statistical tests when using this technique. This makes the technique vulnerable to criticisms of its reliability and validity. The general goal of this article is to explore how…

Determining e-Portfolio Elements in Learning Process Using Fuzzy Delphi Analysis

ERIC Educational Resources Information Center

Mohamad, Syamsul Nor Azlan; Embi, Mohamad Amin; Nordin, Norazah

2015-01-01

The present article introduces the Fuzzy Delphi method results obtained in the study on determining e-Portfolio elements in learning process for art and design context. This method bases on qualified experts that assure the validity of the collected information. In particular, the confirmation of elements is based on experts' opinion and…

Reinforcement of Science Learning through Local Culture: A Delphi Study

ERIC Educational Resources Information Center

Nuangchalerm, Prasart

2008-01-01

This study aims to explore the ways to reinforce science learning through local culture by using Delphi technique. Twenty four participants in various fields of study were selected. The result of study provides a framework for reinforcement of science learning through local culture on the theme life and environment. (Contains 1 table.)

The Stammering Information Programme: A Delphi Study

ERIC Educational Resources Information Center

Berquez, Ali E.; Cook, Frances M.; Millard, Sharon K.; Jarvis, Effie

2011-01-01

Purpose: To find out what information children, parents and education staff feel would be important to know to support a child who stutters in the educational environment, in order to develop appropriate resources. Method: A Delphi study was carried out to seek the opinions of experts about the information to include. A structured six stage…

The Delphi Process: Some Assumptions and Some Realities.

ERIC Educational Resources Information Center

Waldron, James S.

The effectiveness of the Delphi Technique is evaluated in terms of immediate and delayed controlled information feedback (feedback within 5 seconds as compared with a 24-hour delay); and the relationships that exist among measures of integrative complexity, estimations about the time of occurrence of future events, and time delay between task…

Expert Consensus on Characteristics of Wisdom: A Delphi Method Study

ERIC Educational Resources Information Center

Jeste, Dilip V.; Ardelt, Monika; Blazer, Dan; Kraemer, Helena C.; Vaillant, George; Meeks, Thomas W.

2010-01-01

Purpose: Wisdom has received increasing attention in empirical research in recent years, especially in gerontology and psychology, but consistent definitions of wisdom remain elusive. We sought to better characterize this concept via an expert consensus panel using a 2-phase Delphi method. Design and Methods: A survey questionnaire comprised 53…

The Future of Information Literacy in Academic Libraries: A Delphi Study

ERIC Educational Resources Information Center

Saunders, Laura

2009-01-01

Information literacy is a central tenet of academic librarianship. However, technological advancements coupled with drastic changes in users' information needs and expectations are having a great impact on this service, leading practitioners to wonder how programs may evolve. Based on a Delphi study, this article surveyed 13 information literacy…

Qualitative Delphi Study of Factors Influencing Data Center Investment in Eco-Innovations

ERIC Educational Resources Information Center

Stewart, M. Bennett

2016-01-01

This qualitative investigation explored the diffusion of eco-innovations within the U.S. data center industry from 2007 to 2015 whose adoption was intended to decouple digital economy growth from environmental impact. Using diffusion of innovation theory to inform the study, and synthesizing subject matter expert input from a Delphi panel…

Quality Characteristics of a Graduate Teacher Education Program in Graphic Communications: Results from a Delphi Research Study.

ERIC Educational Resources Information Center

Clark, Aaron C.; Scales, Alice Y.

2000-01-01

Investigates characteristics of a quality program in graphic communications teacher education with involvement of professionals in the field. Uses the Delphi technique to achieve consensus on the characteristics that they felt compromised a good educational program for future graphics teachers. (Contains 27 references.) (Author/YDS)

[Modified Delphi method in the constitution of school sanitation standard].

PubMed

Yin, Xunqiang; Liang, Ying; Tan, Hongzhuan; Gong, Wenjie; Deng, Jing; Luo, Jiayou; Di, Xiaokang; Wu, Yue

2012-11-01

To constitute school sanitation standard using modified Delphi method, and to explore the feasibility and the predominance of Delphi method in the constitution of school sanitation standard. Two rounds of expert consultations were adopted in this study. The data were analyzed with SPSS15.0 to screen indices of school sanitation standard. Thirty-two experts accomplished the 2 rounds of consultations. The average length of expert service was (24.69 ±8.53) years. The authority coefficient was 0.729 ±0.172. The expert positive coefficient was 94.12% (32/34) in the first round and 100% (32/32) in the second round. The harmonious coefficients of importance, feasibility and rationality in the second round were 0.493 (P<0.05), 0.527 (P<0.01), and 0.535 (P<0.01), respectively, suggesting unanimous expert opinions. According to the second round of consultation, 38 indices were included in the framework. Theoretical analysis, literature review, investigation and so on are generally used in health standard constitution currently. Delphi method is a rapid, effective and feasible method in this field.

Exploring health literacy competencies towards patient education programme for Chinese-speaking healthcare professionals: a Delphi study

PubMed Central

Chang, Li-Chun; Chen, Yu-Chi; Wu, Fei Ling; Liao, Li-Ling

2017-01-01

Objectives To achieve consensus on a set of competencies in health literacy practice based on a literature review and expert consultation. Setting Hospitals and community health centres in Taiwan. Method A 2-stage modified Delphi study involving a literature review was conducted, followed by qualitative interviews and 3 rounds of email-based data collection over a 3-month period in 2011. Participants 15 Chinese healthcare practitioners with more than 6 months’ experience in patient education were interviewed to collect data on health literacy practice. 24 experts (12 academic scholars in health literacy and 12 professionals with training related to health literacy practice) were invited to participate in the Delphi process. Results Qualitative data from the interviews were analysed and summarised to form 99 competency items for health literacy practice, which were categorised into 5 domains of health literacy practice including those pertaining to knowledge and skills. Consensus was reached on 92 of 99 competencies, using a modified Delphi technique. Conclusions The 92 competencies in health literacy practice embraced core components of patient education in the Chinese healthcare profession. PMID:28093428

Molecular beam epitaxy growth of niobium oxides by solid/liquid state oxygen source and lithium assisted metal-halide chemistry

NASA Astrophysics Data System (ADS)

Tellekamp, M. Brooks; Greenlee, Jordan D.; Shank, Joshua C.; Doolittle, W. Alan

2015-09-01

In order to consistently grow high quality niobium oxides and lithium niobium oxides, a novel solid/liquid state oxygen source, LiClO4, has been implemented in a molecular beam epitaxy (MBE) system. LiClO4 is shown to decompose into both molecular and atomic oxygen upon heating. This allows oxidation rates similar to that of molecular oxygen but at a reduced overall beam flux, quantified by in situ Auger analysis. LiClO4 operation is decomposition limited to less than 400 °C, and other material limitations are identified. The design of a custom near-ambient NbCl5 effusion cell is presented, which improves both short and long term stability. Films of Nb oxidation state +2, +3, and +5 are grown using these new tools, including the multi-functional sub-oxide LiNbO2.

Ceramification: A plutonium immobilization process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rask, W.C.; Phillips, A.G.

1996-05-01

This paper describes a low temperature technique for stabilizing and immobilizing actinide compounds using a combination process/storage vessel of stainless steel, in which measured amounts of actinide nitrate solutions and actinide oxides (and/or residues) are systematically treated to yield a solid article. The chemical ceramic process is based on a coating technology that produces rare earth oxide coatings for defense applications involving plutonium. The final product of this application is a solid, coherent actinide oxide with process-generated encapsulation that has long-term environmental stability. Actinide compounds can be stabilized as pure materials for ease of re-use or as intimate mixtures withmore » additives such as rare earth oxides to increase their degree of proliferation resistance. Starting materials for the process can include nitrate solutions, powders, aggregates, sludges, incinerator ashes, and others. Agents such as cerium oxide or zirconium oxide may be added as powders or precursors to enhance the properties of the resulting solid product. Additives may be included to produce a final product suitable for use in nuclear fuel pellet production. The process is simple and reduces the time and expense for stabilizing plutonium compounds. It requires a very low equipment expenditure and can be readily implemented into existing gloveboxes. The process is easily conducted with less associated risk than proposed alternative technologies.« less

Nitrous Oxide/Paraffin Hybrid Rocket Engines

NASA Technical Reports Server (NTRS)

Zubrin, Robert; Snyder, Gary

2010-01-01

Nitrous oxide/paraffin (N2OP) hybrid rocket engines have been invented as alternatives to other rocket engines especially those that burn granular, rubbery solid fuels consisting largely of hydroxyl- terminated polybutadiene (HTPB). Originally intended for use in launching spacecraft, these engines would also be suitable for terrestrial use in rocket-assisted takeoff of small airplanes. The main novel features of these engines are (1) the use of reinforced paraffin as the fuel and (2) the use of nitrous oxide as the oxidizer. Hybrid (solid-fuel/fluid-oxidizer) rocket engines offer advantages of safety and simplicity over fluid-bipropellant (fluid-fuel/fluid-oxidizer) rocket en - gines, but the thrusts of HTPB-based hybrid rocket engines are limited by the low regression rates of the fuel grains. Paraffin used as a solid fuel has a regression rate about 4 times that of HTPB, but pure paraffin fuel grains soften when heated; hence, paraffin fuel grains can, potentially, slump during firing. In a hybrid engine of the present type, the paraffin is molded into a 3-volume-percent graphite sponge or similar carbon matrix, which supports the paraffin against slumping during firing. In addition, because the carbon matrix material burns along with the paraffin, engine performance is not appreciably degraded by use of the matrix.

Room-Temperature Performance of Poly(Ethylene Ether Carbonate)-Based Solid Polymer Electrolytes for All-Solid-State Lithium Batteries.

PubMed

Jung, Yun-Chae; Park, Myung-Soo; Kim, Duck-Hyun; Ue, Makoto; Eftekhari, Ali; Kim, Dong-Won

2017-12-13

Amorphous poly(ethylene ether carbonate) (PEEC), which is a copolymer of ethylene oxide and ethylene carbonate, was synthesized by ring-opening polymerization of ethylene carbonate. This route overcame the common issue of low conductivity of poly(ethylene oxide)(PEO)-based solid polymer electrolytes at low temperatures, and thus the solid polymer electrolyte could be successfully employed at the room temperature. Introducing the ethylene carbonate units into PEEC improved the ionic conductivity, electrochemical stability and lithium transference number compared with PEO. A cross-linked solid polymer electrolyte was synthesized by photo cross-linking reaction using PEEC and tetraethyleneglycol diacrylate as a cross-linking agent, in the form of a flexible thin film. The solid-state Li/LiNi 0.6 Co 0.2 Mn 0.2 O 2 cell assembled with solid polymer electrolyte based on cross-linked PEEC delivered a high initial discharge capacity of 141.4 mAh g -1 and exhibited good capacity retention at room temperature. These results demonstrate the feasibility of using this solid polymer electrolyte in all-solid-state lithium batteries that can operate at ambient temperatures.

Development of a Solid-Oxide Fuel Cell/Gas Turbine Hybrid System Model for Aerospace Applications

NASA Technical Reports Server (NTRS)

Freeh, Joshua E.; Pratt, Joseph W.; Brouwer, Jacob

2004-01-01

Recent interest in fuel cell-gas turbine hybrid applications for the aerospace industry has led to the need for accurate computer simulation models to aid in system design and performance evaluation. To meet this requirement, solid oxide fuel cell (SOFC) and fuel processor models have been developed and incorporated into the Numerical Propulsion Systems Simulation (NPSS) software package. The SOFC and reformer models solve systems of equations governing steady-state performance using common theoretical and semi-empirical terms. An example hybrid configuration is presented that demonstrates the new capability as well as the interaction with pre-existing gas turbine and heat exchanger models. Finally, a comparison of calculated SOFC performance with experimental data is presented to demonstrate model validity. Keywords: Solid Oxide Fuel Cell, Reformer, System Model, Aerospace, Hybrid System, NPSS

Core Outcomes in Ventilation Trials (COVenT): protocol for a core outcome set using a Delphi survey with a nested randomised trial and observational cohort study.

PubMed

Blackwood, Bronagh; Ringrow, Suzanne; Clarke, Mike; Marshall, John; Rose, Louise; Williamson, Paula; McAuley, Danny

2015-08-20

Among clinical trials of interventions that aim to modify time spent on mechanical ventilation for critically ill patients there is considerable inconsistency in chosen outcomes and how they are measured. The Core Outcomes in Ventilation Trials (COVenT) study aims to develop a set of core outcomes for use in future ventilation trials in mechanically ventilated adults and children. We will use a mixed methods approach that incorporates a randomised trial nested within a Delphi study and a consensus meeting. Additionally, we will conduct an observational cohort study to evaluate uptake of the core outcome set in published studies at 5 and 10 years following core outcome set publication. The three-round online Delphi study will use a list of outcomes that have been reported previously in a review of ventilation trials. The Delphi panel will include a range of stakeholder groups including patient support groups. The panel will be randomised to one of three feedback methods to assess the impact of the feedback mechanism on subsequent ranking of outcomes. A final consensus meeting will be held with stakeholder representatives to review outcomes. The COVenT study aims to develop a core outcome set for ventilation trials in critical care, explore the best Delphi feedback mechanism for achieving consensus and determine if participation increases use of the core outcome set in the long term.

A modified Delphi method toward multidisciplinary consensus on functional convalescence recommendations after abdominal surgery.

PubMed

van Vliet, Daphne C R; van der Meij, Eva; Bouwsma, Esther V A; Vonk Noordegraaf, Antonie; van den Heuvel, Baukje; Meijerink, Wilhelmus J H J; van Baal, W Marchien; Huirne, Judith A F; Anema, Johannes R

2016-12-01

Evidence-based information on the resumption of daily activities following uncomplicated abdominal surgery is scarce and not yet standardized in medical guidelines. As a consequence, convalescence recommendations are generally not provided after surgery, leading to patients' insecurity, needlessly delayed recovery and prolonged sick leave. The aim of this study was to generate consensus-based multidisciplinary convalescence recommendations, including advice on return to work, applicable for both patients and physicians. Using a modified Delphi method among a multidisciplinary panel of 13 experts consisting of surgeons, occupational physicians and general practitioners, detailed recommendations were developed for graded resumption of 34 activities after uncomplicated laparoscopic cholecystectomy, laparoscopic and open appendectomy, laparoscopic and open colectomy and laparoscopic and open inguinal hernia repair. A sample of occupational physicians, general practitioners and surgeons assessed the recommendations on feasibility in daily practice. The response of this group of care providers was discussed with the experts in the final Delphi questionnaire round. Out of initially 56 activities, the expert panel selected 34 relevant activities for which convalescence recommendations were developed. After four Delphi rounds, consensus was reached for all of the 34 activities for all the surgical procedures. A sample of occupational physicians, general practitioners and surgeons regarded the recommendations as feasible in daily practice. Multidisciplinary convalescence recommendations regarding uncomplicated laparoscopic cholecystectomy, appendectomy (laparoscopic, open), colectomy (laparoscopic, open) and inguinal hernia repair (laparoscopic, open) were developed by a modified Delphi procedure. Further research is required to evaluate whether these recommendations are realistic and effective in daily practice.

Standardizing hysteroscopy teaching: development of a curriculum using the Delphi method.

PubMed

Neveu, Marie-Emmanuelle; Debras, Elodie; Niro, Julien; Fernandez, Hervé; Panel, Pierre

2017-12-01

Hysteroscopy is performed often and in many indications but is challenging to learn. Hands-on training in live patients faces ethical, legal, and economic obstacles. Virtual reality simulation may hold promise as a hysteroscopy training tool. No validated curriculum specific in hysteroscopy exists. The aim of this study was to develop a hysteroscopy curriculum, using the Delphi method to identify skill requirements. Based on a literature review using the key words "curriculum," "simulation," and "hysteroscopy," we identified five technical and non-technical areas in which skills were required. Twenty hysteroscopy experts from different French hospital departments participated in Delphi rounds to select items in these five areas. The rounds were to be continued until 80-100% agreement was obtained for at least 60% of items. A curriculum was built based on the selected items and was evaluated in residents. From November 2014 to April 2015, 18 of 20 invited experts participated in three Delphi rounds. Of the 51 items selected during the first round, only 25 (49%) had 80-100% agreement during the second round, and a third round was therefore conducted. During this last round, 80-100% agreement was achieved for 31 (61%) items, which were used to create the curriculum. All 14 residents tested felt that a simulator training session was acceptable and helped them to improve their skills. We describe a simulation-based hysteroscopy curriculum focusing on skill requirements identified by a Delphi procedure. Its development allows standardization of training programs offered to residents.

Thermographic imaging in sports and exercise medicine: A Delphi study and consensus statement on the measurement of human skin temperature.

PubMed

Moreira, Danilo Gomes; Costello, Joseph T; Brito, Ciro J; Adamczyk, Jakub G; Ammer, Kurt; Bach, Aaron J E; Costa, Carlos M A; Eglin, Clare; Fernandes, Alex A; Fernández-Cuevas, Ismael; Ferreira, José J A; Formenti, Damiano; Fournet, Damien; Havenith, George; Howell, Kevin; Jung, Anna; Kenny, Glen P; Kolosovas-Machuca, Eleazar S; Maley, Matthew J; Merla, Arcangelo; Pascoe, David D; Priego Quesada, Jose I; Schwartz, Robert G; Seixas, Adérito R D; Selfe, James; Vainer, Boris G; Sillero-Quintana, Manuel

2017-10-01

The importance of using infrared thermography (IRT) to assess skin temperature (t sk ) is increasing in clinical settings. Recently, its use has been increasing in sports and exercise medicine; however, no consensus guideline exists to address the methods for collecting data in such situations. The aim of this study was to develop a checklist for the collection of t sk using IRT in sports and exercise medicine. We carried out a Delphi study to set a checklist based on consensus agreement from leading experts in the field. Panelists (n = 24) representing the areas of sport science (n = 8; 33%), physiology (n = 7; 29%), physiotherapy (n = 3; 13%) and medicine (n = 6; 25%), from 13 different countries completed the Delphi process. An initial list of 16 points was proposed which was rated and commented on by panelists in three rounds of anonymous surveys following a standard Delphi procedure. The panel reached consensus on 15 items which encompassed the participants' demographic information, camera/room or environment setup and recording/analysis of t sk using IRT. The results of the Delphi produced the checklist entitled "Thermographic Imaging in Sports and Exercise Medicine (TISEM)" which is a proposal to standardize the collection and analysis of t sk data using IRT. It is intended that the TISEM can also be applied to evaluate bias in thermographic studies and to guide practitioners in the use of this technique. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hydrolysis of ferric chloride in solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lussiez, G.; Beckstead, L.

1996-11-01

The Detox{trademark} process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves amore » two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200{degrees}C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl{sub 3 liquid} + H{sub 2}O {r_arrow} FeOCl{sub solid} + 2 HCl{sub gas} During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOCl{sub solid} + H{sub 2}O {r_arrow} Fe{sub 2}O{sub 3 solid} + 2 HCl{sub gas}. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way.« less

Properties of solid solutions, doped film, and nanocomposite structures based on zinc oxide

NASA Astrophysics Data System (ADS)

Lashkarev, G. V.; Shtepliuk, I. I.; Ievtushenko, A. I.; Khyzhun, O. Y.; Kartuzov, V. V.; Ovsiannikova, L. I.; Karpyna, V. A.; Myroniuk, D. V.; Khomyak, V. V.; Tkach, V. N.; Timofeeva, I. I.; Popovich, V. I.; Dranchuk, N. V.; Khranovskyy, V. D.; Demydiuk, P. V.

2015-02-01

A study of the properties of materials based on the wide bandgap zinc oxide semiconductor, which are promising for application in optoelectronics, photovoltaics and nanoplasmonics. The structural and optical properties of solid solution Zn1-xCdxO films with different cadmium content, are studied. The samples are grown using magnetron sputtering on sapphire backing. Low-temperature photoluminescence spectra revealed emission peaks associated with radiative recombination processes in those areas of the film that have varying amounts of cadmium. X-ray phase analysis showed the presence of a cadmium oxide cubic phase in these films. Theoretical studies of the solid solution thermodynamic properties allowed for a qualitative interpretation of the observed experimental phenomena. It is established that the growth of the homogeneous solid solution film is possible only at high temperatures, whereas regions of inhomogeneous composition can be narrowed through elastic deformation, caused by the mismatch of the film-backing lattice constants. The driving forces of the spinodal decomposition of the Zn1-xCdxO system are identified. Fullerene-like clusters of Znn-xCdxOn are used to calculate the bandgap and the cohesive energy of ZnCdO solid solutions. The properties of transparent conductive ZnO films, doped with Group III donor impurities (Al, Ga, In), are examined. It is shown that oxygen vacancies are responsible for the hole trap centers in the zinc oxide photoconductivity process. We also examine the photoluminescence properties of metal-ZnO nanocomposite structures, caused by surface plasmons.

Fabrication and characterization of solid oxide cells for energy conversion and storage

NASA Astrophysics Data System (ADS)

Yang, Chenghao

2011-12-01

There has been an increasing interest in clean and renewable energy generation for highlighted energy and environmental concerns. Solid oxide cells (SOCs) have been considered as one of the promising technologies, since they can be operated efficiently both in electrolysis mode by generating hydrogen through steam electrolysis and fuel cell mode by electrochemically combining fuel with oxidant. The present work is devoted to performing a fundamental study of SOC in both fuel cell mode for power generation and electrolysis mode for fuel production. The research work on SOCs that can be operated reversibly for power generation and fuel production has been conducted in the following six projects: (1) High performance solid oxide electrolysis cell (SOEC) Fabrication of novel structured SOEC oxygen electrode with the conventional and commercial solid oxide fuel cell materials by screen-printing and infiltration fabrication methods. The microstructure, electrochemical properties and durability of SOECs has been investigated. It was found that the LSM infiltrated cell has an area specific resistance (ASR) of 0.20 Ω cm2 at 900°C at open circuit voltage with 50% absolute humidity (AH), which is relatively lower than that of the cell with LSM-YSZ oxygen electrode made by a conventional mixing method. Electrolysis cell with LSM infiltrated oxygen electrode has demonstrated stable performance under electrolysis operation with 0.33 A/cm2 and 50 vol.% AH at 800°C. (2) Advanced performance high temperature micro-tubular solid oxide fuel cell (MT-SOFC) Phase-inversion, dip-coating, high temperature co-sintering process and impregnation method were used to fabricate micro-tubular solid oxide fuel cell. The micro-structure of the micro-tubular fuel cell will be investigated and the power output and thermal robustness has been evaluated. High performance and rapid start-up behavior have been achieved, indicates that the MT-SOFC developed in this work can be a promising technology for portable applications. (3) Promising intermediate temperature micro-tubular solid oxide fuel cells for portable power supply applications Maximum power densities of 0.5, 0.38 and 0.27 W/cm2 have been obtained using H2-15% H2O as fuel at 550, 600 and 650°C, respectively. Quick thermal cycles performed on the intermediate temperature MT-SOFC stability demonstrate that the cell has robust performance stability for portable applications. (4) Micro-tubular solid oxide cell (MT-SOC) for steam electrolysis The electrochemical properties of MT-SOC will be investigated in detail in electrolysis mode. The mechanism of the novel hydrogen electrode structure benefiting the cell performance will be demonstrated systematically. The high electrochemical performance of the MT-SOC in electrolysis mode indicates that MT-SOC can provide an efficient hydrogen generation process. (5) Micro-tubular solid oxide cell (MT-SOC) for steam and CO2 co-electrolysis The MT-SOC will be operated in co-electrolysis mode for steam and CO 2, which will provide an efficient approach to generate syngas (H2+CO) without consuming fossil fuels. This can potentially provide an alternative superior approach for carbon sequestration which has been a critical issue facing the sustainability of our society. (6) Steam and CO2 co-electrolysis using solid oxide cells fabricated by freeze-drying tape-casting Tri-layer scaffolds have been prepared by freeze-drying tape casting process and the electrode catalysts are obtained by infiltrating the porous electrode substrates. Button cells will be tested for co-electrolysis of steam and CO2. The mechanism and efficiency of steam and CO2 co-electrolysis will be systemically investigated. In conclusion, SOCs have been fabricated with conventional materials and evaluated, but their performance has been found to be limited in either SOFC or SOEC mode. The cell performance has been significantly improved by employing an infiltrated LSM-YSZ electrode, due to dramatically decreased polarization resistance. However, mass transport limitation has been observed, particularly in electrolysis mode. By utilizing micro-tubular SOCs with novel hydrogen electrode produced via a phase inversion method, mass transport limitation has been mitigated. Finally, mass transport has been further improved by using cells with electrodes fabricated through a freeze-drying tape-casting method. (Abstract shortened by UMI.)

A Study of Oxides for Solid Oxide Cells

NASA Astrophysics Data System (ADS)

Comets, Olivier

As the world energy consumption increases, it is a question of global health to increase energy production efficiency and to reduce CO2 emissions. In that respect, solid oxide cells are solid state devices that convert directly fuel into electricity, or vice versa. In fact, when run in fuel cell mode, such devices produce electricity with efficiency up to twice that of current natural gas power plants. However, systems equipped with them have only seen limited commercialization owing to issues of cost, durability, and performance. In this thesis, three different aspects of solid oxide cells are studied. First, the effects of stress on the properties of mixed ionic electronic conducting oxides are considered. Such oxides can be used as electrode materials, where they are often subject to large stresses, which can, in turn, affect their performance. Hence, understanding the relationship between stress and properties in such materials is crucial. Non-stoichiometry in strontium substituted lanthanum cobaltite is found to increase under tension and to decrease under compression. Then, degradation taking place when the cell is run in electrolysis mode is discussed. A high current allows for a high production rate of hydrogen gas. However, this can also lead to oxygen bubble nucleating in the electrolyte and subsequent degradation of the cell. The analysis conducted here shows that such nucleation phenomenon can be avoided by keeping the overpotential at the oxygen electrode below a critical value. Finally, the growth and coarsening of catalyst nanoparticles at the surface of an oxide is studied. Scientists have developed new oxides for anodes in which a catalyst material is dissolved and exsolves under operating conditions. As the performance of the cell is controlled by the surface area of the catalyst phase, understanding the kinetics of the growth is critical to predict the performance of the cell. An approach is developed to study the growth of one particle, in the limiting case where only bulk transport is allowed.

PIPc study: development of indicators of potentially inappropriate prescribing in children (PIPc) in primary care using a modified Delphi technique

PubMed Central

Barry, Emma; O'Brien, Kirsty; Cooper, Janine; Redmond, Patrick; Hughes, Carmel M; Bennett, Kathleen; Fahey, Tom; Smith, Susan M

2016-01-01

Objective There is limited evidence regarding the quality of prescribing for children in primary care. Several prescribing criteria (indicators) have been developed to assess the appropriateness of prescribing in older and middle-aged adults but few are relevant to children. The objective of this study was to develop a set of prescribing indicators that can be applied to prescribing or dispensing data sets to determine the prevalence of potentially inappropriate prescribing in children (PIPc) in primary care settings. Design Two-round modified Delphi consensus method. Setting Irish and UK general practice. Participants A project steering group consisting of academic and clinical general practitioners (GPs) and pharmacists was formed to develop a list of indicators from literature review and clinical expertise. 15 experts consisting of GPs, pharmacists and paediatricians from the Republic of Ireland and the UK formed the Delphi panel. Results 47 indicators were reviewed by the project steering group and 16 were presented to the Delphi panel. In the first round of this exercise, consensus was achieved on nine of these indicators. Of the remaining seven indicators, two were removed following review of expert panel comments and discussion of the project steering group. The second round of the Delphi process focused on the remaining five indicators, which were amended based on first round feedback. Three indicators were accepted following the second round of the Delphi process and the remaining two indicators were removed. The final list consisted of 12 indicators categorised by respiratory system (n=6), gastrointestinal system (n=2), neurological system (n=2) and dermatological system (n=2). Conclusions The PIPc indicators are a set of prescribing criteria developed for use in children in primary care in the absence of clinical information. The utility of these criteria will be tested in further studies using prescribing databases. PMID:27601499

Medication dispensing errors in Palestinian community pharmacy practice: a formal consensus using the Delphi technique.

PubMed

Shawahna, Ramzi; Haddad, Aseel; Khawaja, Baraa; Raie, Rand; Zaneen, Sireen; Edais, Tasneem

2016-10-01

Background Medication dispensing errors (MDEs) are frequent in community pharmacy practice. A definition of MDEs and scenarios representing MDE situations in Palestinian community pharmacy practice were not previously approached using formal consensus techniques. Objective This study was conducted to achieve consensus on a definition of MDEs and a wide range of scenarios that should or should not be considered as MDEs in Palestinian community pharmacy practice by a panel of community pharmacists. Setting Community pharmacy practice in Palestine. Method This was a descriptive study using the Delphi technique. A panel of fifty community pharmacists was recruited from different geographical locations of the West Bank of Palestine. A three round Delphi technique was followed to achieve consensus on a proposed definition of MDEs and 83 different scenarios representing potential MDEs using a nine-point scale. Main outcome measure Agreement or disagreement of a panel of community pharmacists on a proposed definition of MDEs and a series of scenarios representing potential MDEs. Results In the first Delphi round, views of key contact community pharmacists on MDEs were explored and situations representing potential MDEs were collected. In the second Delphi round, consensus was achieved to accept the proposed definition and to include 49 (59 %) of the 83 proposed scenarios as MDEs. In the third Delphi round, consensus was achieved to include further 13 (15.7 %) scenarios as MDEs, exclude 9 (10.8 %) scenarios and the rest of 12 (14.5 %) scenarios were considered equivocal based on the opinions of the panelists. Conclusion Consensus on a definition of MDEs and scenarios representing MDE situations in Palestinian community pharmacy practice was achieved using a formal consensus technique. The use of consensual definitions and scenarios representing MDE situations in community pharmacy practice might minimize methodological variations and their significant effects on the number and rate of MDEs reported in different studies.

PIPc study: development of indicators of potentially inappropriate prescribing in children (PIPc) in primary care using a modified Delphi technique.

PubMed

Barry, Emma; O'Brien, Kirsty; Moriarty, Frank; Cooper, Janine; Redmond, Patrick; Hughes, Carmel M; Bennett, Kathleen; Fahey, Tom; Smith, Susan M

2016-09-06

There is limited evidence regarding the quality of prescribing for children in primary care. Several prescribing criteria (indicators) have been developed to assess the appropriateness of prescribing in older and middle-aged adults but few are relevant to children. The objective of this study was to develop a set of prescribing indicators that can be applied to prescribing or dispensing data sets to determine the prevalence of potentially inappropriate prescribing in children (PIPc) in primary care settings. Two-round modified Delphi consensus method. Irish and UK general practice. A project steering group consisting of academic and clinical general practitioners (GPs) and pharmacists was formed to develop a list of indicators from literature review and clinical expertise. 15 experts consisting of GPs, pharmacists and paediatricians from the Republic of Ireland and the UK formed the Delphi panel. 47 indicators were reviewed by the project steering group and 16 were presented to the Delphi panel. In the first round of this exercise, consensus was achieved on nine of these indicators. Of the remaining seven indicators, two were removed following review of expert panel comments and discussion of the project steering group. The second round of the Delphi process focused on the remaining five indicators, which were amended based on first round feedback. Three indicators were accepted following the second round of the Delphi process and the remaining two indicators were removed. The final list consisted of 12 indicators categorised by respiratory system (n=6), gastrointestinal system (n=2), neurological system (n=2) and dermatological system (n=2). The PIPc indicators are a set of prescribing criteria developed for use in children in primary care in the absence of clinical information. The utility of these criteria will be tested in further studies using prescribing databases. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A core outcome set for localised prostate cancer effectiveness trials: protocol for a systematic review of the literature and stakeholder involvement through interviews and a Delphi survey.

PubMed

MacLennan, Steven; Bekema, Hendrika J; Williamson, Paula R; Campbell, Marion K; Stewart, Fiona; MacLennan, Sara J; N'Dow, James M O; Lam, Thomas B L

2015-03-04

Prostate cancer is a growing health problem worldwide. The management of localised prostate cancer is controversial. It is unclear which of several surgical, radiotherapeutic, ablative, and surveillance treatments is the most effective. All have cost, process and recovery, and morbidity implications which add to treatment decision-making complexity for patients and healthcare professionals. Evidence from randomised controlled trials (RCTs) is not optimal because of uncertainty as to what constitutes important outcomes. Another issue hampering evidence synthesis is heterogeneity of outcome definition, measurement, and reporting. This project aims to determine which outcomes are the most important to patients and healthcare professionals, and use these findings to recommend a standardised core outcome set for comparative effectiveness trials of treatments for localised prostate cancer, to optimise decision-making. The range of potentially important outcomes and measures will be identified through systematic reviews of the literature and semi-structured interviews with patients. A consultation exercise involving representatives from two key stakeholder groups (patients and healthcare professionals) will ratify the list of outcomes to be entered into a three round Delphi study. The Delphi process will refine and prioritise the list of identified outcomes. A methodological substudy (nested RCT design) will also be undertaken. Participants will be randomised after round one of the Delphi study to one of three feedback groups, based on different feedback strategies, in order to explore the potential impact of feedback strategies on participant responses. This may assist the design of a future core outcome set and Delphi studies. Following the Delphi study, a final consensus meeting attended by representatives from both stakeholder groups will determine the final recommended core outcome set. This study will inform clinical practice and future trials of interventions of localised prostate cancer by standardising a core outcome set which should be considered in comparative effectiveness studies for localised prostate cancer.

Establishment of a dental license regulation authority is required in Korea: results of the Delphi technique.

PubMed

Choi, Jin-Woo; Kim, Kack-Kyun; Lee, Jihyun; Choi, Dong-Ju; Kim, Kyung-Nyun

2017-01-01

In addition to dental education, a system for the evaluation and management of dental licensing and certification is required to meet the growing societal demand for more competent dentists. In this study, the Delphi technique was used to gather opinions from a variety of professionals on the problems of and remedies for the dental license management system in Korea. Delphi surveys were conducted from April 2016 to October 2016 in South Korea. A variety of dental professionals were included and categorized into 3 groups according to their expertise as follows: the basic dentistry group, the clinical dentistry group, and the policy group. The Delphi technique was conducted in 3 rounds of e-mail surveys, each with different questions that probed with increasing depth on the dental license management system. In each successive round, the responses were categorized, scored on a Likert scale, and statistically analyzed. After categorizing the results of the first survey and ranking the results of the second survey using the Delphi technique, regulation by a licensing authority was found to be the most critical issue. This was followed by the license renewal system, continuing education, a tiered licensure system, improvement of foreign license approval, and utilization of retirees, in decreasing order of importance. The third Delphi survey showed a similar ranking, with regulation by a licensing authority being the major concern. Opinions regarding the dental license management system were provided as open-ended responses. The responses of the 3 groups showed statistically significant differences in the scores for the issue of regulation by a licensing authority. After re-grouping into the dentistry group and the policy group, the issue received a significantly higher score in the dentistry group. The quality of dental treatment should be managed to protect patients and dental professionals. For this purpose, the establishment of an independent license regulation authority along with legislative changes is required.

Electrode property of single-walled carbon nanotubes in all-solid-state lithium ion battery using polymer electrolyte

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sakamoto, Y.; Ishii, Y.; Kawasaki, S., E-mail: kawasaki.shinji@nitech.ac.jp

2016-07-06

Electrode properties of single-walled carbon nanotubes (SWCNTs) in an all-solid-state lithium ion battery were investigated using poly-ethylene oxide (PEO) solid electrolyte. Charge-discharge curves of SWCNTs in the solid electrolyte cell were successfully observed. It was found that PEO electrolyte decomposes on the surface of SWCNTs.

Polymer blends for use in photoelectrochemical cells for conversion of solar energy to electricity and methods for manufacturing such blends

DOEpatents

Skotheim, T.

A polymer blend is disclosed of a highly conductive polymer and a solid polymer electrolyte that is designed to achieve better charge transfer across the conductive film/polymer electrolyte interface of the electrochemical photovoltaic cell. The highly conductive polymer is preferably polypyrrole or poly-N-p-nitrophenylpyrrole and the solid polymer electrolyte is preferably polyethylene oxide or polypropylene oxide.

High temperature solid oxide regenerative fuel cell for solar photovoltaic energy storage

NASA Technical Reports Server (NTRS)

Bents, David J.

1987-01-01

A hydrogen-oxygen regenerative fuel cell (RFC) energy storage system based on high temperature solid oxide fuel cell (SOFC) technology is described. The reactants are stored as gases in lightweight insulated pressure vessels. The product water is stored as a liquid in saturated equilibrium with the fuel gas. The system functions as a secondary battery and is applicable to darkside energy storage for solar photovoltaics.

Monolithic solid oxide fuel cell development

NASA Technical Reports Server (NTRS)

Myles, K. M.; Mcpheeters, C. C.

1989-01-01

The feasibility of the monolithic solid oxide fuel cell (MSOFC) concept has been proven, and the performance has been dramatically improved. The differences in thermal expansion coefficients and firing shrinkages among the fuel cell materials have been minimized, thus allowing successful fabrication of the MSOFC with few defects. The MSOFC shows excellent promise for development into a practical power source for many applications from stationary power, to automobile propulsion, to space pulsed power.

Fuel electrode containing pre-sintered nickel/zirconia for a solid oxide fuel cell

DOEpatents

Ruka, Roswell J.; Vora, Shailesh D.

2001-01-01

A fuel cell structure (2) is provided, having a pre-sintered nickel-zirconia fuel electrode (6) and an air electrode (4), with a ceramic electrolyte (5) disposed between the electrodes, where the pre-sintered fuel electrode (6) contains particles selected from the group consisting of nickel oxide, cobalt and cerium dioxide particles and mixtures thereof, and titanium dioxide particles, within a matrix of yttria-stabilized zirconia and spaced-apart filamentary nickel strings having a chain structure, and where the fuel electrode can be sintered to provide an active solid oxide fuel cell.

Mössbauer study of modified iron-molybdenum catalysts for methanol oxidation

NASA Astrophysics Data System (ADS)

Ivanov, K. I.; Mitov, I. G.; Krustev, St. V.; Boyanov, B. S.

2010-03-01

The preparation and catalytic properties of mixed Fe-Mo-W catalysts toward methanol oxidation are investigated. Mössbauer spectroscopy, X-ray diffraction and chemical studies revealed the formation of two types of solid solutions with compositions Fe2(MoxW1-xO4)3 and (MoxW1-x)O3. The solid solutions formed are characterized by high activity and selectivity upon methanol oxidation and are of interest in view of their practical application. Sodium-doped iron-molybdenum catalysts are also investigated and the NaFe(MoO4)2 formation was established.

Recovery of iron oxide from coal fly ash

DOEpatents

Dobbins, Michael S.; Murtha, Marlyn J.

1983-05-31

A high quality iron oxide concentrate, suitable as a feed for blast and electric reduction furnaces is recovered from pulverized coal fly ash. The magnetic portion of the fly ash is separated and treated with a hot strong alkali solution which dissolves most of the silica and alumina in the fly ash, leaving a solid residue and forming a precipitate which is an acid soluble salt of aluminosilicate hydrate. The residue and precipitate are then treated with a strong mineral acid to dissolve the precipitate leaving a solid residue containing at least 90 weight percent iron oxide.

The analysis of magnesium oxide hydration in three-phase reaction system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Xiaojia; Guo, Lin; Chen, Chen

In order to investigate the magnesium oxide hydration process in gas–liquid–solid (three-phase) reaction system, magnesium hydroxide was prepared by magnesium oxide hydration in liquid–solid (two-phase) and three-phase reaction systems. A semi-empirical model and the classical shrinking core model were used to fit the experimental data. The fitting result shows that both models describe well the hydration process of three-phase system, while only the semi-empirical model right for the hydration process of two-phase system. The characterization of the hydration product using X-Ray diffraction (XRD) and scanning electron microscope (SEM) was performed. The XRD and SEM show hydration process in the two-phasemore » system follows common dissolution/precipitation mechanism. While in the three-phase system, the hydration process undergo MgO dissolution, Mg(OH){sub 2} precipitation, Mg(OH){sub 2} peeling off from MgO particle and leaving behind fresh MgO surface. - Graphical abstract: There was existence of a peeling-off process in the gas–liquid–solid (three-phase) MgO hydration system. - Highlights: • Magnesium oxide hydration in gas–liquid–solid system was investigated. • The experimental data in three-phase system could be fitted well by two models. • The morphology analysis suggested that there was existence of a peel-off process.« less

Electrochemical investigation of mixed metal oxide nanocomposite electrode for low temperature solid oxide fuel cell

NASA Astrophysics Data System (ADS)

Abbas, Ghazanfar; Raza, Rizwan; Ashfaq Ahmad, M.; Ajmal Khan, M.; Jafar Hussain, M.; Ahmad, Mukhtar; Aziz, Hammad; Ahmad, Imran; Batool, Rida; Altaf, Faizah; Zhu, Bin

2017-10-01

Zinc-based nanostructured nickel (Ni) free metal oxide electrode material Zn0.60/Cu0.20Mn0.20 oxide (CMZO) was synthesized by solid state reaction and investigated for low temperature solid oxide fuel cell (LTSOFC) applications. The crystal structure and surface morphology of the synthesized electrode material were examined by XRD and SEM techniques respectively. The particle size of ZnO phase estimated by Scherer’s equation was 31.50 nm. The maximum electrical conductivity was found to be 12.567 S/cm and 5.846 S/cm in hydrogen and air atmosphere, respectively at 600∘C. The activation energy of the CMZO material was also calculated from the DC conductivity data using Arrhenius plots and it was found to be 0.060 and 0.075 eV in hydrogen and air atmosphere, respectively. The CMZO electrode-based fuel cell was tested using carbonated samarium doped ceria composite (NSDC) electrolyte. The three layers 13 mm in diameter and 1 mm thickness of the symmetric fuel cell were fabricated by dry pressing. The maximum power density of 728.86 mW/cm2 was measured at 550∘C.

Evidence-based algorithm for diagnosis and assessment in psoriatic arthritis: results by Italian DElphi in psoriatic Arthritis (IDEA).

PubMed

Lapadula, G; Marchesoni, A; Salaffi, F; Ramonda, R; Salvarani, C; Punzi, L; Costa, L; Caso, F; Simone, D; Baiocchi, G; Scioscia, C; Di Carlo, M; Scarpa, R; Ferraccioli, G

2016-12-16

Psoriatic arthritis (PsA) is a chronic inflammatory disease involving skin, peripheral joints, entheses, and axial skeleton. The disease is frequently associated with extrarticular manifestations (EAMs) and comorbidities. In order to create a protocol for PsA diagnosis and global assessment of patients with an algorithm based on anamnestic, clinical, laboratory and imaging procedures, we established a DElphi study on a national scale, named Italian DElphi in psoriatic Arthritis (IDEA). After a literature search, a Delphi poll, involving 52 rheumatologists, was performed. On the basis of the literature search, 202 potential items were identified. The steering committee planned at least two Delphi rounds. In the first Delphi round, the experts judged each of the 202 items using a score ranging from 1 to 9 based on its increasing clinical relevance. The questions posed to experts were How relevant is this procedure/observation/sign/symptom for assessment of a psoriatic arthritis patient? Proposals of additional items, not included in the questionnaire, were also encouraged. The results of the poll were discussed by the Steering Committee, which evaluated the necessity for removing selected procedures or adding additional ones, according to criteria of clinical appropriateness and sustainability. A total of 43 recommended diagnosis and assessment procedures, recognized as items, were derived by combination of the Delphi survey and two National Expert Meetings, and grouped in different areas. Favourable opinion was reached in 100% of cases for several aspects covering the following areas: medical (familial and personal) history, physical evaluation, imaging tool, second level laboratory tests, disease activity measurement and extrarticular manifestations. After performing PsA diagnosis, identification of specific disease activity scores and clinimetric approaches were suggested for assessing the different clinical subsets. Further, results showed the need for investigation on the presence of several EAMs and risk factors. In the context of any area, a rank was assigned for each item by Expert Committee members, in order to create the logical sequence of the algorithm. The final list of recommended diagnosis and assessment procedures, by the Delphi survey and the two National Expert Meetings, was also reported as an algorithm. This study shows results obtained by the combination of a DElphi survey of a group of Italian rheumatologists and two National Expert Meetings, created with the aim of establishing a clinical procedure and algorithm for the diagnosis and the assessment of PsA patients. In order to find accurate and practical diagnostic and assessment items in clinical practice, we have focused our attention on evaluating the different PsA domains. Hence, we conceived the IDEA algorithm in order to address PsA diagnosis and assessment in the context of daily clinical practice. The IDEA algorithm might eventually lead to a multidimensional approach and could represent a useful and practical tool for addressing diagnosis and for assessing the disease appropriately. However, the elaborated algorithm needs to be further investigated in daily practice, for evidencing and proving its eventual efficacy in detecting and staging PsA and its heterogeneous spectrum appropriately.

Toward ambient temperature operation with all-solid-state lithium metal batteries with a sp3 boron-based solid single ion conducting polymer electrolyte

NASA Astrophysics Data System (ADS)

Zhang, Yunfeng; Cai, Weiwei; Rohan, Rupesh; Pan, Meize; Liu, Yuan; Liu, Xupo; Li, Cuicui; Sun, Yubao; Cheng, Hansong

2016-02-01

The ionic conductivity decay problem of poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) when increase the lithium salt of the SPEs up to high concentration is here functionally overcome by the incorporation of a charge delocalized sp3 boron based single ion conducting polymer electrolyte (SIPE) with poly(ethylene oxide) to fabricate solid-state sp3 boron based SIPE membranes (S-BSMs). By characterizations, particularly differential scanning calorimeter (DSC) and ionic conductivity studies, the fabricated S-BSMs showed decreased melting points and increased ionic conductivity as steadily increase the content of sp3 boron based SIPE, which significantly improved the low temperature performance of the all-solid-state lithium batteries. The fabricated Li | S-BSMs | LiFePO4 cells exhibit highly electrochemical stability and excellent cycling at temperature below melting point of PEO, which has never been reported so far for SIPEs based all-solid-state lithium batteries.

Multilayer heterostructures and their manufacture

DOEpatents

Hammond, Scott R; Reese, Matthew; Rupert, Benjamin; Miedaner, Alexander; Curtis, Clavin; Olson, Dana; Ginley, David S

2015-11-04

A method of synthesizing multilayer heterostructures including an inorganic oxide layer residing on a solid substrate is described. Exemplary embodiments include producing an inorganic oxide layer on a solid substrate by a liquid coating process under relatively mild conditions. The relatively mild conditions include temperatures below 225.degree. C. and pressures above 9.4 mb. In an exemplary embodiment, a solution of diethyl aluminum ethoxide in anhydrous diglyme is applied to a flexible solid substrate by slot-die coating at ambient atmospheric pressure, and the diglyme removed by evaporation. An AlO.sub.x layer is formed by subjecting material remaining on the solid substrate to a relatively mild oven temperature of approximately 150.degree. C. The resulting AlO.sub.x layer exhibits relatively high light transmittance and relatively low vapor transmission rates for water. An exemplary embodiment of a flexible solid substrate is polyethylene napthalate (PEN). The PEN is not substantially adversely affected by exposure to 150.degree. C

Na3.4Zr1.8Mg0.2Si2PO12 filled poly(ethylene oxide)/Na(CF3SO2)2N as flexible composite polymer electrolyte for solid-state sodium batteries

NASA Astrophysics Data System (ADS)

Zhang, Zhizhen; Xu, Kaiqi; Rong, Xiaohui; Hu, Yong-Sheng; Li, Hong; Huang, Xuejie; Chen, Liquan

2017-12-01

Solid electrolytes with high ionic conductivity and excellent electrochemical stability are of prime significance to enable the application of solid-state batteries in energy storage and conversion. In this study, solid composite polymer electrolytes (CPEs) based on sodium bis(trifluorosulfonyl) imide (NaTFSI) and poly (ethylene oxide) (PEO) incorporated with active ceramic filler (NASICON) are reported for the first time. With the addition of NASICON fillers, the thermal stability and electrochemical stability of the CPEs are improved. A high conductivity of 2.8 mS/cm (at 80 °C) is readily achieved when the content of the NASICON filler in the composite polymer reaches 50 wt%. Furthermore, Na3V2(PO4)3/CPE/Na solid-state batteries using this composite electrolyte display good rate and excellent cycle performance.

Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap Through Combined Refining and Solid Oxide Membrane (SOM) Electrolysis Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guan, Xiaofei; Zink, Peter; Pal, Uday

2012-03-11

Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.%Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the Mg content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapors in a separate condenser. The solid oxide membrane (SOM) electrolysis process ismore » employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium; could not collect and weigh all of the magnesium recovered.« less

Barium oxide, calcium oxide, magnesia, and alkali oxide free glass

DOEpatents

Lu, Peizhen Kathy; Mahapatra, Manoj Kumar

2013-09-24

A glass composition consisting essentially of about 10-45 mole percent of SrO; about 35-75 mole percent SiO.sub.2; one or more compounds from the group of compounds consisting of La.sub.2O.sub.3, Al.sub.2O.sub.3, B.sub.2O.sub.3, and Ni; the La.sub.2O.sub.3 less than about 20 mole percent; the Al.sub.2O.sub.3 less than about 25 mole percent; the B.sub.2O.sub.3 less than about 15 mole percent; and the Ni less than about 5 mole percent. Preferably, the glass is substantially free of barium oxide, calcium oxide, magnesia, and alkali oxide. Preferably, the glass is used as a seal in a solid oxide fuel/electrolyzer cell (SOFC) stack. The SOFC stack comprises a plurality of SOFCs connected by one or more interconnect and manifold materials and sealed by the glass. Preferably, each SOFC comprises an anode, a cathode, and a solid electrolyte.

Methods for the preparation and analysis of solids and suspended solids for total mercury

USGS Publications Warehouse

Olund, Shane D.; DeWild, John F.; Olson, Mark L.; Tate, Michael T.

2004-01-01

The methods documented in this report are utilized by the Wisconsin District Mercury Lab for analysis of total mercury in solids (soils and sediments) and suspended solids (isolated on filters). Separate procedures are required for the different sample types. For solids, samples are prepared by room-temperature acid digestion and oxidation with aqua regia. The samples are brought up to volume with a 5 percent bromine monochloride solution to ensure complete oxidation and heated at 50?C in an oven overnight. Samples are then analyzed with an automated flow injection system incorporating a cold vapor atomic fluorescence spectrometer. A method detection limit of 0.3 ng of mercury per digestion bomb was established using multiple analyses of an environmental sample. Based on the range of masses processed, the minimum sample reporting limit varies from 0.6 ng/g to 6 ng/g. Suspended solids samples are oxidized with a 5 percent bromine monochloride solution and held at 50?C in an oven for 5 days. The samples are then analyzed with an automated flow injection system incorporating a cold vapor atomic fluorescence spectrometer. Using a certified reference material as a surrogate for an environmental sample, a method detection limit of 0.059 ng of mercury per filter was established. The minimum sample reporting limit varies from 0.059 ng/L to 1.18 ng/L, depending on the volume of water filtered.

Effect of the introduction of oxide ion vacancies into cubic fluorite-type rare earth oxides on the NO decomposition catalysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masui, Toshiyuki; Nagai, Ryosuke; Imanaka, Nobuhito, E-mail: imanaka@chem.eng.osaka-u.ac.jp

2014-12-15

Cubic fluorite-type solid solutions based on Pr{sub 6}O{sub 11} and CeO{sub 2} were synthesized and oxide anion vacancies were intentionally introduced into the cubic fluorite-type lattice through the charge compensating mechanism by Mg{sup 2+} and/or Ca{sup 2+} doping into their lattices. The oxide anion vacancies bring about positive effect on NO decomposition catalysis. The reason for the increase in the catalytic activity was attributed to defect fluorite-type structures close to the C-type cubic one, because C-type cubic rare earth oxides, in which one-quarter of the oxygen atoms in the fluorite-type structure are removed, show high NO decomposition activity. In particular,more » the positive effect of the formation of oxide anion vacancies was significant for Pr{sub 6}O{sub 11} and its solid solutions, because the molar volume of Pr{sub 6}O{sub 11} is larger than that of CeO{sub 2}, and Pr{sub 6}O{sub 11} contains Pr{sup 3+} as well as Pr{sup 4+} and thereby a small amount of oxide anion vacancies exist inherently in the lattice. - Graphical abstract: Oxide anion vacancies intentionally introduced into the cubic fluorite-type lattice bring about positive effect on NO decomposition catalysis. - Highlights: • Cubic fluorite-type solid solutions were synthesized. • Oxide anion vacancies were intentionally introduced into the cubic fluorite-type lattice. • The oxide anion vacancies bring about positive effect on NO decomposition catalysis. • The activity was enhanced by making the structure close to the C-type cubic one.« less

Micro solid oxide fuel cell fabricated on porous stainless steel: a new strategy for enhanced thermal cycling ability

PubMed Central

Kim, Kun Joong; Park, Byung Hyun; Kim, Sun Jae; Lee, Younki; Bae, Hongyeul; Choi, Gyeong Man

2016-01-01

Miniaturized solid oxide fuel cells (micro-SOFCs) are being extensively studied as a promising alternative to Li batteries for next generation portable power. A new micro-SOFC is designed and fabricated which shows enhanced thermal robustness by employing oxide-based thin-film electrode and porous stainless steel (STS) substrate. To deposit gas-tight thin-film electrolyte on STS, nano-porous composite oxide is proposed and applied as a new contact layer on STS. The micro-SOFC fabricated on composite oxide- STS dual layer substrate shows the peak power density of 560 mW cm−2 at 550 °C and maintains this power density during rapid thermal cycles. This cell may be suitable for portable electronic device that requires high power-density and fast thermal cycling. PMID:26928921

Micro solid oxide fuel cell fabricated on porous stainless steel: a new strategy for enhanced thermal cycling ability.

PubMed

Kim, Kun Joong; Park, Byung Hyun; Kim, Sun Jae; Lee, Younki; Bae, Hongyeul; Choi, Gyeong Man

2016-03-01

Miniaturized solid oxide fuel cells (micro-SOFCs) are being extensively studied as a promising alternative to Li batteries for next generation portable power. A new micro-SOFC is designed and fabricated which shows enhanced thermal robustness by employing oxide-based thin-film electrode and porous stainless steel (STS) substrate. To deposit gas-tight thin-film electrolyte on STS, nano-porous composite oxide is proposed and applied as a new contact layer on STS. The micro-SOFC fabricated on composite oxide- STS dual layer substrate shows the peak power density of 560 mW cm(-2) at 550 °C and maintains this power density during rapid thermal cycles. This cell may be suitable for portable electronic device that requires high power-density and fast thermal cycling.

Calcium-Iron Oxide as Energy Storage Medium in Rechargeable Oxide Batteries

DOE PAGES

Berger, Cornelius M.; Mahmoud, Abdelfattah; Hermann, Raphaël P.; ...

2016-08-08

Rechargeable oxide batteries (ROB) comprise a regenerative solid oxide cell (rSOC) and a storage medium for oxygen ions. A sealed ROB avoids pumping loss, heat loss, and gas purity expenses in comparison with conventional rSOC. However, the iron oxide base storage medium degrades during charging–discharging cycles. In comparison, CaFe 3O 5 has improved cyclability and a high reversible oxygen storage capacity of 22.3 mol%. In this paper, we analyzed the redox mechanism of this compound. After a solid-state synthesis of CaFe 3O 5, we verified the phase composition and studied the redox reaction by means of X-ray diffraction, Mössbauer spectrometry,more » and scanning electron microscopy. Finally, results show a great potential to operate the battery with this storage material during multiple charging–discharging cycles.« less

A Delphi Investigation into Future Trends in E-Learning in Israel

ERIC Educational Resources Information Center

Aharony, Noa; Bronstein, Jenny

2014-01-01

The purpose of this study is to investigate the views and opinions of e-learning experts regarding future trends in the e-learning arena. The Delphi technique was chosen as a method of study. This technique is an efficient and effective group communication process designed to systematically elicit judgments from experts in their selected area of…

Views and Dreams: A Delphi Investigation into Library 2.0 Applications

ERIC Educational Resources Information Center

Bronstein, Jenny; Aharony, Noa

2009-01-01

The study's purpose was to investigate the views and opinions of librarians about the implementation of Web 2.0 technologies into library operations and services. The Delphi technique was chosen as the method of inquiry in this study, in which a group of panelists graded the desirability and probability of a list of statements. Thirty-nine…

A Delphi Investigation into the Research Needs in Swedish Librarianship

ERIC Educational Resources Information Center

Maceviciute, Elena; Wilson, T. D.

2009-01-01

Introduction: Reports the conduct of a national survey in Sweden to establish the desired research priorities for libraries. The research sought to establish what evidence-base is needed for evidence-based practice. Method: The Delphi method was employed to solicit opinions on the kinds of research needed by libraries of all kinds in Sweden.…

Increasing Activeness and Learning Outcomes by Developing Borland Delphi 7.0 Application as Instructional Media

ERIC Educational Resources Information Center

Setyorini, Dyna; Churiyah, Madziatul

2016-01-01

This study aims to produce instructional media of petty cash fund with Borland Delphi 7.0 application in the Finance Administration subject, Managing Petty Cash Fund material in class XII APK in Vocational High School (SMK) Negeri 1 Pasuruan, East Java, Indonesia. This study used "Research and Development" (R&D) design procedures…

Designing Graduate-Level Plant Breeding Curriculum: A Delphi Study of Private Sector Stakeholder Opinions

ERIC Educational Resources Information Center

Miller, Jane K.; Repinski, Shelby L.; Hayes, Kathryn N.; Bliss, Frederick A.; Trexler, Cary J.

2011-01-01

A broad-based survey using the Delphi method was conducted to garner current information from private sector stakeholders and build consensus opinions supporting key ideas for enhancing plant breeder education and training. This study asked respondents to suggest and rate topics and content they deemed most important to plant breeding graduate…

An Empirical Investigation of Entrepreneurship Intensity in Iranian State Universities

ERIC Educational Resources Information Center

Mazdeh, Mohammad Mahdavi; Razavi, Seyed-Mostafa; Hesamamiri, Roozbeh; Zahedi, Mohammad-Reza; Elahi, Behin

2013-01-01

The purpose of this study is to propose a framework to evaluate the entrepreneurship intensity (EI) of Iranian state universities. In order to determine EI, a hybrid multi-method framework consisting of Delphi, Analytic Network Process (ANP), and VIKOR is proposed. The Delphi method is used to localize and reduce the number of criteria extracted…

Identifying Areas of Tension in the Field of Technology-Enhanced Learning: Results of an International Delphi Study

ERIC Educational Resources Information Center

Plesch, Christine; Kaendler, Celia; Rummel, Nikol; Wiedmann, Michael; Spada, Hans

2013-01-01

Despite steady progress in research in technology-enhanced learning (TEL), the translation of research findings and technology into educational practices falls short of expectations. We present five Areas of Tension which were identified and evaluated in an international Delphi study on TEL. These tensions might impede a more comprehensive…

Identification of Core Competencies for an Undergraduate Food Safety Curriculum Using a Modified Delphi Approach

ERIC Educational Resources Information Center

Johnston, Lynette M.; Wiedmann, Martin; Orta-Ramirez, Alicia; Oliver, Haley F.; Nightingale, Kendra K.; Moore, Christina M.; Stevenson, Clinton D.; Jaykus, Lee-Ann

2014-01-01

Identification of core competencies for undergraduates in food safety is critical to assure courses and curricula are appropriate in maintaining a well-qualified food safety workforce. The purpose of this study was to identify and refine core competencies relevant to postsecondary food safety education using a modified Delphi method. Twenty-nine…

The Underutilization of Information and Communication Technology-Assisted Collaborative Project-Based Learning among International Educators: A Delphi Study

ERIC Educational Resources Information Center

Kramer, Barry S.; Walker, Andrew E.; Brill, Jennifer M.

2007-01-01

This study explores the barriers associated with teachers implementing information and communication technology-assisted collaborative project-based learning (ICTCPrjBL) as a classroom teaching methodology with students. We used a Web-based Delphi method to engage experienced educators in anonymous consensus building consisting of three rounds of…

Greenhouse Facility Management Experts Identification of Competencies and Teaching Methods to Support Secondary Agricultural Education Instructors: A Modified Delphi Study

ERIC Educational Resources Information Center

Franklin, Edward A.

2011-01-01

In this study the Delphi technique has been used to develop a list of educational competencies for preparing secondary agricultural education instructors to effectively manage their school greenhouse facilities. The use of specialized facilities in agricultural education requires appropriate preparation of agricultural education teachers. The…

A Classical Delphi Study to Identify the Barriers of Pursuing Green Information and Communication Technologies

ERIC Educational Resources Information Center

Gotay, Jose Antonio

2013-01-01

This qualitative, classical Delphi study served to explore the apparent lack of corporate commitment to prioritized Green Information Communication Technologies (ICTs), which could delay the economic and social benefits for maximizing the use of natural energy resources in a weak economy. The purpose of this study was to examine the leadership…

A Delphi Study on Technology Enhanced Learning (TEL) Applied on Computer Science (CS) Skills

ERIC Educational Resources Information Center

Porta, Marcela; Mas-Machuca, Marta; Martinez-Costa, Carme; Maillet, Katherine

2012-01-01

Technology Enhanced Learning (TEL) is a new pedagogical domain aiming to study the usage of information and communication technologies to support teaching and learning. The following study investigated how this domain is used to increase technical skills in Computer Science (CS). A Delphi method was applied, using three-rounds of online survey…

Idea Generation and Exploration: Benefits and Limitations of the Policy Delphi Research Method

ERIC Educational Resources Information Center

Franklin, Kathy K.; Hart, Jan K.

2007-01-01

Researchers use the policy Delphi method to explore a complex topic with little historical context that requires expert opinion to fully understand underlying issues. The benefit of this research technique is the use of experts who have more timely information than can be gleamed from extant literature. Additionally, those experts place…

77 FR 2773 - Proposed Information Collection Request; Notice of New Requirements and Procedures for Grant...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

... the Office of Management and Budget (OMB). You may submit comments by the following methods: Email... required to have electronic Internet access to register in the Delphi eInvoicing system. Grantees will be.... The identities of system users must be verified prior to receiving access to the Delphi eInvoicing...

Identifying Threshold Concepts for Information Literacy: A Delphi Study

ERIC Educational Resources Information Center

Townsend, Lori; Hofer, Amy R.; Hanick, Silvia Lin; Brunetti, Korey

2016-01-01

This study used the Delphi method to engage expert practitioners on the topic of threshold concepts--core ideas and processes in a discipline that students need to grasp in order to progress in their learning, but that are often unspoken or unrecognized by expert practitioners--for information literacy. A panel of experts considered two questions:…

Emerging Issues in the Utilization of Weblogs in Higher Education Classrooms

ERIC Educational Resources Information Center

Ayao-ao, Shirley

2014-01-01

This paper examines the emerging issues in the utilization of weblogs in Philippine higher education and how these issues affect the performance of students. This study used a modified Delphi method. The Delphi panel consisted of 12 experts in the integration of technology, particularly blogs, in their teaching. The study yielded the following…

Trends that FCS Education Should Address: A Delphi Study Reveals Top 16

ERIC Educational Resources Information Center

Alexander, Karen L.; Davis, Kimberlee

2011-01-01

This study used the Delphi method to identify trends of importance to family and consumer sciences (FCS) education. A panel of 21 FCS education experts identified 16 trends and evaluated them by importance, desirability, feasibility, and confidence in validity of the trend. Nutrition appeared as a top priority, followed by consumer economics. The…

Trails research: where do we go from here?

Treesearch

Michael A. Schuett; Patricia Seiser

2002-01-01

This paper describes a recent study focusing on trails research needs. This study was supported by American Trails. Using a Delphi technique, 86 trails experts representing a variety of federal, state and local agencies, nonprofits, and trail uses were queried by email on trails research needs. A Delphi technique is a prognostic tool for dealing with complex problems...

Delphi in Criminal Justice Policy: A Case Study on Judgmental Forecasting

ERIC Educational Resources Information Center

Loyens, Kim; Maesschalck, Jeroen; Bouckaert, Geert

2011-01-01

This article provides an in-depth case study analysis of a pilot project organized by the section "Strategic Analysis" of the Belgian Federal Police. Using the Delphi method, which is a judgmental forecasting technique, a panel of experts was questioned about future developments of crime, based on their expertise in criminal or social…

Knowledge as an Aspect of Scientific Competence for Citizenship: Results of a Delphi Study in Spain

ERIC Educational Resources Information Center

España-Ramos, Enrique; González-García, Francisco José; Blanco-López, Ángel; Franco-Mariscal, Antonio Joaquín

2016-01-01

This article focuses on scientific knowledge as one aspect of the scientific competencies that citizens should ideally possess. The analysis is based on a Delphi study we conducted with Spanish experts from different science-related fields. The results showed that although the experts proposed several examples of scientific knowledge, the degree…

African American Parental Beliefs about Resiliency: A Delphi Study

ERIC Educational Resources Information Center

Jones, Vita; Higgins, Kyle; Boone, Randall; Miller, Susan P.; Sileo, Nancy

2014-01-01

This study involved a Delphi inquiry concerning the characteristics of resiliency specific to African American children/youth. The study was conducted with a large group of African American parents who were considered experts in resiliency because they had graduated from high school and had at least one child who had graduated from high school.…

Research Priorities for YouTube and Video-Sharing Technologies: A Delphi Study

ERIC Educational Resources Information Center

Snelson, Chareen; Rice, Kerry; Wyzard, Constance

2012-01-01

Online video-sharing services, particularly YouTube, have gained an audience of billions of users including educators and scholars. While the academic literature provides some evidence that YouTube has been studied and written about, little is known about priorities for YouTube research. The study employed the Delphi method to obtain a consensus…

The Essential Components of Coach Training for Mental Health Professionals: A Delphi Study

ERIC Educational Resources Information Center

Moriarity, Marlene Therese

2010-01-01

Purpose. The purpose of this study was to discover how coach training experts define coaching and what they would identify to be the essential components of a coach training program for mental health professionals. Methods. A panel of nine experts, through an iterative Delphi process of responding to three rounds of questionnaires, provided…

Financial Leadership Competencies for Public College and University Presidential Leaders in Georgia: A Delphi Study

ERIC Educational Resources Information Center

Jones, Susan M.

2011-01-01

The purpose of the mixed-method Delphi study is to identify the financial leadership competencies considered most important in operating public higher education institutions. The current study also determined whether differences existed in the perceptions of participants' age, level of education, years of service as a president, the number of…

Critical Guidelines for U.S.-Based Counselor Educators When Working Transnationally: A Delphi Study

ERIC Educational Resources Information Center

Smith, Paul H.; Benshoff, James M.; Gonzalez, Laura M.

2018-01-01

U.S.-based counselor education faculty increasingly are participating in transnational experiences, such as global research and study abroad. The purpose of this study was to develop guidelines for U.S.-based counselor educators when working transnationally. Using Delphi methodology, 69 consensus guidelines were developed from an expert panel.…

A Delphi Study: The Characteristics of Democratic Schools

ERIC Educational Resources Information Center

Korkmaz, H. Eylem; Erden, Münire

2014-01-01

The authors aim to identify characteristics of democratic schools. The Delphi technique used in this study is based on attaining a consensus among a group of experts over 3 rounds with 22 experts from 9 countries participating in the first round. By the end of the third round, 339 items referring to democratic school characteristics were…

A Delphi Study to Understand Relational Bonds in Supervision and Their Effect on Rehabilitation Counselor Disclosure in the Public Rehabilitation Program

ERIC Educational Resources Information Center

Magnuson, Lori Anne

2012-01-01

The scholarly literature surrounding counselor supervision suggests that relational bonds built on liking, trusting, and caring between supervisors and counselors positively impact counselor willingness to disclose practice errors and ethical issues in supervision. This Delphi study explored the opinions of expert public rehabilitation supervisors…

Issues Facing Urban Agriscience Teachers: A Delphi Study

ERIC Educational Resources Information Center

Warner, Wendy J.; Washburn, Shannon G.

2009-01-01

This national study used the Delphi technique to identify the issues facing urban agriscience teachers. The first round of the study used a questionnaire with one open-ended question to generate responses from the expert panel. In the second round, respondents were asked to rate their level of agreement with 72 issues identified in round one using…

The Semiconductor Industry and Emerging Technologies: A Study Using a Modified Delphi Method

ERIC Educational Resources Information Center

Jordan, Edgar A.

2010-01-01

The purpose of this qualitative descriptive study was to determine what leaders in the semiconductor industry thought the future of computing would look like and what emerging materials showed the most promise to overcome the current theoretical limit of 10 nanometers for silicon dioxide. The researcher used a modified Delphi technique in two…

Exploring Research Themes in Public Engagement within a Natural History Museum: A Modified Delphi Approach

ERIC Educational Resources Information Center

Seakins, Amy; Dillon, Justin

2013-01-01

The primacy of the research question in designing studies affords an opportunity for enhancing collaborations between researchers and "practitioners". This paper describes the use of a modified Delphi technique to co-generate research questions for a collaborative research study co-funded by a university and a natural history museum.…

Identifying Core Mobile Learning Faculty Competencies Based Integrated Approach: A Delphi Study

ERIC Educational Resources Information Center

Elbarbary, Rafik Said

2015-01-01

This study is based on the integrated approach as a concept framework to identify, categorize, and rank a key component of mobile learning core competencies for Egyptian faculty members in higher education. The field investigation framework used four rounds Delphi technique to determine the importance rate of each component of core competencies…

Characteristics of Viable and Sustainable Workers for the Year 2015.

ERIC Educational Resources Information Center

Dean, Brenda Pennington; West, Russell

A two-round Delphi study was conducted to identify the characteristics of viable and sustainable employees in northeastern Tennessee in 2015. The Delphi panel selected for the study consisted of 25 experts who represented a cross-section of the businesses and communities in the 10-county area of northeastern Tennessee served by Walters State…

Habitat suitability index curves for paddlefish, developed by the delphi technique

USGS Publications Warehouse

Crance, John H.

1987-01-01

A Delphi exercise conducted with a panel of 11 experts on paddlefish (Polyodon spathula) and an evaluator resulted in 14 riverine habitat suitability index curves associating various life stages or activities of paddlefish with four variables: velocity, depth, substrate type, and temperature. The panel reached a consensus on six of the curves and eight to 10 panelists agreed on the others. Several panelists reported that they found the Delphi exercise to be a good learning experience, and they believed the technique is an appropriate interim method for developing suitability index curves when available data are inadequate for more conventional statistical analyses. Documentation of good paddlefish spawning habitat was the data need most commonly identified by the panelists.

Electrode materials: a challenge for the exploitation of protonic solid oxide fuel cells

PubMed Central

Fabbri, Emiliana; Pergolesi, Daniele; Traversa, Enrico

2010-01-01

High temperature proton conductor (HTPC) oxides are attracting extensive attention as electrolyte materials alternative to oxygen-ion conductors for use in solid oxide fuel cells (SOFCs) operating at intermediate temperatures (400–700 °C). The need to lower the operating temperature is dictated by cost reduction for SOFC pervasive use. The major stake for the deployment of this technology is the availability of electrodes able to limit polarization losses at the reduced operation temperature. This review aims to comprehensively describe the state-of-the-art anode and cathode materials that have so far been tested with HTPC oxide electrolytes, offering guidelines and possible strategies to speed up the development of protonic SOFCs. PMID:27877342

Strengthening of metallic alloys with nanometer-size oxide dispersions

DOEpatents

Flinn, John E.; Kelly, Thomas F.

1999-01-01

Austenitic stainless steels and nickel-base alloys containing, by wt. %, 0.1 to 3.0% V, 0.01 to 0.08% C, 0.01 to 0.5% N, 0.05% max. each of Al and Ti, and 0.005 to 0.10% O, are strengthened and ductility retained by atomization of a metal melt under cover of an inert gas with added oxygen to form approximately 8 nanometer-size hollow oxides within the alloy grains and, when the alloy is aged, strengthened by precipitation of carbides and nitrides nucleated by the hollow oxides. Added strengthening is achieved by nitrogen solid solution strengthening and by the effect of solid oxides precipitated along and pinning grain boundaries to provide temperature-stabilization and refinement of the alloy grains.

High strength porous support tubes for high temperature solid electrolyte electrochemical cells

DOEpatents

Rossing, Barry R.; Zymboly, Gregory E.

1986-01-01

A high temperature, solid electrolyte electrochemical cell is made, having an electrode and a solid electrolyte disposed on a porous, sintered support material containing thermally stabilized zirconia powder particles and from about 3 wt. % to about 45 wt. % of thermally stable oxide fibers.

Evaluation of biochars by temperature programmed oxidation/mass spectroscopy

USDA-ARS?s Scientific Manuscript database

Biochar from the thermochemical conversion of biomass was evaluated by Temperature Programmed Oxidation (TPO) coupled with mass spectroscopy. This technique can be used to assess the oxidative reactivity of carbonaceous solids where higher temperature reactivity indicates greater structural order. ...

Synthesis, structure, and catalytic performance in cyclooctene epoxidation of a molybdenum oxide/bipyridine hybrid material: {[MoO3(bipy)][MoO3(H2O)]}n.

PubMed

Abrantes, Marta; Amarante, Tatiana R; Antunes, Margarida M; Gago, Sandra; Paz, Filipe A Almeida; Margiolaki, Irene; Rodrigues, Alírio E; Pillinger, Martyn; Valente, Anabela A; Gonçalves, Isabel S

2010-08-02

The reaction of [MoO(2)Cl(2)(bipy)] (1) (bipy = 2,2'-bipyridine) with water in a Teflon-lined stainless steel autoclave (100 degrees C, 19 h), in an open reflux system with oil bath heating (12 h) or in a microwave synthesis system (120 degrees C, 4 h), gave the molybdenum oxide/bipyridine hybrid material {[MoO(3)(bipy)][MoO(3)(H(2)O)]}(n) (2) as a microcrystalline powder in yields of 72-92%. The crystal structure of 2 determined from synchrotron X-ray powder diffraction data is composed of two distinct neutral one-dimensional polymers: an organic-inorganic polymer, [MoO(3)(bipy)](n), and a purely inorganic chain, [MoO(3)(H(2)O)](n), which are interconnected by O-H...O hydrogen bonding interactions. Compound 2 is a moderately active, stable, and selective catalyst for the epoxidation of cis-cyclooctene at 55 degrees C with tert-butylhydroperoxide (tBuOOH, 5.5 M in decane or 70% aqueous) as the oxidant. Biphasic solid-liquid or triphasic solid-organic-aqueous mixtures are formed, and 1,2-epoxycyclooctane is the only reaction product. When n-hexane is employed as a cosolvent and tBuOOH(decane) is the oxidant, the catalytic reaction is heterogeneous in nature, and the solid catalyst can be recycled and reused without a loss of activity. For comparison, the catalytic performance of the precursor 1 was also investigated. The IR spectra of solids recovered after catalysis indicate that 1 transforms into the organic-inorganic polymer [MoO(3)(bipy)] when the oxidant is tBuOOH(decane) and compound 2 when the oxidant is 70% aqueous tBuOOH.

Solid-state membrane module

DOEpatents

Gordon, John Howard [Salt Lake City, UT; Taylor, Dale M [Murray, UT

2011-06-07

Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.