Science.gov

Sample records for demand multipath distance

  1. Receiver-Based Ad Hoc On Demand Multipath Routing Protocol for Mobile Ad Hoc Networks

    PubMed Central

    Al-Nahari, Abdulaziz; Mohamad, Mohd Murtadha

    2016-01-01

    Decreasing the route rediscovery time process in reactive routing protocols is challenging in mobile ad hoc networks. Links between nodes are continuously established and broken because of the characteristics of the network. Finding multiple routes to increase the reliability is also important but requires a fast update, especially in high traffic load and high mobility where paths can be broken as well. The sender node keeps re-establishing path discovery to find new paths, which makes for long time delay. In this paper we propose an improved multipath routing protocol, called Receiver-based ad hoc on demand multipath routing protocol (RB-AOMDV), which takes advantage of the reliability of the state of the art ad hoc on demand multipath distance vector (AOMDV) protocol with less re-established discovery time. The receiver node assumes the role of discovering paths when finding data packets that have not been received after a period of time. Simulation results show the delay and delivery ratio performances are improved compared with AOMDV. PMID:27258013

  2. Demanding Need of Growing Technologies in Distance Learning System

    ERIC Educational Resources Information Center

    Hafeez, Amtul; Ahmed, Aiijaz; Zubia, Noreen

    2014-01-01

    In distance education system use of different media enable the learners to start the course of study independently. The appearance of the internet and the expansion of web have now changed distance learning from a broadcasting way to an interactive way, and allowed connecting the learners and instructors who are geographically divided.…

  3. Multipath Measurements

    DTIC Science & Technology

    1974-08-01

    JJHAXBUO OtGcnN«»Pi/l80. . ABl./ SOHT (2.) I EUBPI"«.«P1 ’ P1D21PI/2, READ 1NP1 PHlNT INPI IM.NOT.THACK) GH Tu b READ INPO PRINT INPO PHI«1,/PRF...XI.AM IF(C,GT.220)BtTuPN GAlNSsExP(-G) B»»T»2C8CUUNT)«6*IN8 COMPUTE DISTANCE FPU" SPFCUL»« POINT TO TABCET OT» SOHT ((XTP-XSPFC)*«2*(VTP-VSPEC

  4. Effect of travel distance on household demand for typhoid vaccines: implications for planning.

    PubMed

    Kim, Dohyeong; Lauria, Donald T; Poulos, Christine; Dong, Baiqing; Whittington, Dale

    2014-01-01

    Typhoid fever causes millions of illnesses and hundreds of thousands of deaths yearly. Vaccinations would mitigate this problem, but the users would probably have to pay some or most of the cost. Several willingness-to-pay studies have assessed the effect of price on private demand to provide a basis for financial planning of campaigns, but the effect of travel distance, which is a potentially important determinant of demand, has not been studied. This paper thus has two objectives: (i) conduct a willingness-to-pay survey to assess the effects of distance, price and other variables on the private demand for typhoid vaccinations in a rural township of China where a campaign is under consideration; and (ii) embed the demand function in a mathematical model to address three planning questions; should each village have its own clinic, would one clinic be best or should the number of clinics be something in-between? Private vaccine demand was found to depend on and be inelastic with respect to both price and travel distance. A 1-km increase in distance caused the number of vaccinations demanded to decrease the same as a $0.5 increase in price. Thus, the marginal rate of substitution was $0.5 per km. A single clinic would be best for the township only if diseconomies of scale in supplying vaccinations exceeded the marginal rate of substitution. Otherwise, multiple clinics close to users would be optimal. Thus, deciding the number, location and capacities of clinics for vaccination planning is as important as deciding what price(s) to charge. Copyright © 2013 John Wiley & Sons, Ltd.

  5. Eigenvalues and troposcatter multipath analysis

    NASA Astrophysics Data System (ADS)

    Matthews, James W.

    1992-04-01

    Performance predictions for troposcatter channels with multipath are developed using the eigenvalues in the Karhunen-Loeve representation of the tropo signal. Flat Rayleigh fading predictions, in the presence of jamming, are easily extended to multipath channels with this technique.

  6. Multipath signal model development

    NASA Technical Reports Server (NTRS)

    Ghais, A. F.; Wachsman, R. H.

    1970-01-01

    The development and use of mathematical models of signals received through the multipath environmental of a TDRS-to-user spacecraft link and vice versa are discussed. The TDRS (tracking and data relay satellite) will be in synchronous orbit. The user spacecraft will be in a low altitude orbit between 200 and 4000 km.

  7. Multipath analysis diffraction calculations

    NASA Technical Reports Server (NTRS)

    Statham, Richard B.

    1996-01-01

    This report describes extensions of the Kirchhoff diffraction equation to higher edge terms and discusses their suitability to model diffraction multipath effects of a small satellite structure. When receiving signals, at a satellite, from the Global Positioning System (GPS), reflected signals from the satellite structure result in multipath errors in the determination of the satellite position. Multipath error can be caused by diffraction of the reflected signals and a method of calculating this diffraction is required when using a facet model of the satellite. Several aspects of the Kirchhoff equation are discussed and numerical examples, in the near and far fields, are shown. The vector form of the extended Kirchhoff equation, by adding the Larmor-Tedone and Kottler edge terms, is given as a mathematical model in an appendix. The Kirchhoff equation was investigated as being easily implemented and of good accuracy in the basic form, especially in phase determination. The basic Kirchhoff can be extended for higher accuracy if desired. A brief discussion of the method of moments and the geometric theory of diffraction is included, but seems to offer no clear advantage in implementation over the Kirchhoff for facet models.

  8. GPS antenna multipath rejection performance

    NASA Astrophysics Data System (ADS)

    Dinius, A. M.

    1995-08-01

    A GPS antenna multipath rejection performance evaluation was conducted. Ground reference station antennas and aviation patches were tested for their ability to reject a multipath signal. Different types of ground plane structures were used such as choke rings, ground planes, and mock sections of fuselage. Frequencies transmitted were L1 (1575 MHz), L2 (1227 MHz), and the median GLONASS frequency (1609 MHz). Receive amplitude and phase were measured on each antenna. Subsequently, these data were converted to absolute gain for a right hand and left hand circularly polarized signal as a function of satellite elevation angle. Two types of multipath signals were considered: ground bounce multipath and building or structure bounce multipath. Ground bounce multipath typically occurs at low satellite elevation angles while structure bounce multipath can occur at any satellite elevation angle. Separate analysis methods were used to assess an antenna's ability to reject either type of multipath. This report describes the data collection methods, data reduction and analysis, and the results.

  9. Can informal social distancing interventions minimize demand for antiviral treatment during a severe pandemic?

    PubMed Central

    2013-01-01

    Background In the case of a pandemic, individuals may alter their behaviour. A dynamic model incorporating social distancing can provide a mechanism to consider complex scenarios to support decisions regarding antiviral stockpile size while considering uncertainty around behavioural interventions. We have examined the impact of social distancing measures on the demand for limited healthcare resources such as antiviral drugs from a central stockpile during a severe pandemic. Methods We used an existing age-structured model for pandemic influenza in Canada and biologically plausible scenarios for severe influenza transmission within the population. We incorporated data from published reports regarding stated intentions to change behaviour during a pandemic as well as the magnitude and duration of time that individuals expected to maintain the behavioural change. We ran simulations for all combinations of parameter values to identify the projected antiviral requirements in each scenario. Results With 12 weeks of distancing, the effect is relatively small for the lowest R0 of 1.6 with a projected stockpile to treat 25.6% being required (IQR = 21.7 – 28.7%) unless the proportion of people involved (81%) and magnitude of the behaviour change is large (69% reduction in contacts). If 24 weeks of distancing occurs, with only a low to moderate reduction in contacts (38% or less), it is not possible to bring treatment requirements below 20% regardless of what proportion of the population engages in distancing measures when transmissibility is high (R0 = 2.0; stockpile size = 31%, IQR = 29.2 – 33.5%). Conclusions Our results demonstrate that the magnitude and duration of social distancing behaviours during a severe pandemic have an impact on the need for antiviral drugs. However, significant investments over a long period of time (>16 weeks) are required to decrease the need for antiviral treatment to below 10% of the total population for a highly

  10. Physiological Demands of Competitive Sprint and Distance Performance in Elite Female Cross-Country Skiing.

    PubMed

    Carlsson, Magnus; Carlsson, Tomas; Wedholm, Lars; Nilsson, Mattias; Malm, Christer; Tonkonogi, Michail

    2016-08-01

    Carlsson, M, Carlsson, T, Wedholm, L, Nilsson, M, Malm, C, and Tonkonogi, M. Physiological demands of competitive sprint and distance performance in elite female cross-country skiing. J Strength Cond Res 30(8): 2138-2144, 2016-The purpose was to investigate the relationship between elite females' competitive performance capability in sprint and distance cross-country skiing and the variables of gross efficiency (GE), work rate at the onset of blood-lactate accumulation (OBLA4mmol), maximal oxygen uptake (V[Combining Dot Above]O2max), maximal speed (Vmax), and peak upper-body oxygen uptake (V[Combining Dot Above]O2peak). Ten elite female cross-country skiers (age 24.5 ± 2.8 years) completed treadmill roller-skiing tests to determine GE, OBLA4mmol, and V[Combining Dot Above]O2max using the diagonal-stride technique as well as Vmax and V[Combining Dot Above]O2peak using the double-poling technique. International Ski Federations ranking points for sprint (FISsprint) and distance (FISdist) races were used as competitive performance data. There were correlations between the FISsprint and the V[Combining Dot Above]O2max expressed absolutely (p = 0.0040), Vmax (p = 0.012), and V[Combining Dot Above]O2peak expressed absolutely (p < 0.001) and as a simple ratio-standard (p = 0.049). The FISdist were correlated with OBLA4mmol (p = 0.048), V[Combining Dot Above]O2max expressed absolutely (L·min) (p = 0.015) and as a simple ratio-standard (p = 0.046), and V[Combining Dot Above]O2peak expressed absolutely (p = 0.036) and as a simple ratio-standard (ml·min·kg) (p = 0.040). The results demonstrate that the physiological abilities reflected by V[Combining Dot Above]O2max and V[Combining Dot Above]O2peak are indicators of competitive sprint and distance performance in elite female cross-country skiing. In addition, the ability to generate a high Vmax indicates the performance in sprint races, whereas the skier's OBLA4mmol reflects the performance capability in distance races

  11. Multipath calibration in GPS pseudorange measurements

    NASA Technical Reports Server (NTRS)

    Kee, Changdon (Inventor); Parkinson, Bradford W. (Inventor)

    1998-01-01

    Novel techniques are disclosed for eliminating multipath errors, including mean bias errors, in pseudorange measurements made by conventional global positioning system receivers. By correlating the multipath signals of different satellites at their cross-over points in the sky, multipath mean bias errors are effectively eliminated. By then taking advantage of the geometrical dependence of multipath, a linear combination of spherical harmonics are fit to the satellite multipath data to create a hemispherical model of the multipath. This calibration model can then be used to compensate for multipath in subsequent measurements and thereby obtain GPS positioning to centimeter accuracy.

  12. GPS Multipath in Urban Environments

    NASA Astrophysics Data System (ADS)

    Bilich, A.; Sella, G.

    2008-12-01

    Multipath, where a GNSS signal arrives by more than one path, is considered one of the last unmodeled errors remaining in GNSS. Multipath is of great concern because the additional path length traveled by the incoming signal biases the satellite-receiver range and therefore determination of position. Siting a GNSS station in an urban area, in the immediate vicinity of large reflecting objects such as rooftops, buildings, asphalt and concrete parking lots, grassy fields, and chainlink fences, is both a multipath nightmare and a necessary evil. We note that continuously-operating GNSS stations are becoming increasingly common in urban areas, which makes sense as these stations are often installed in support of civil infrastructure (e.g. departments of transportation, strong motion monitoring of buildings in earthquake-prone areas, surveying networks). Urban stations are well represented in geodetic networks such as the CORS (United States) and GeoNet (Japan) networks, with more stations likely to be installed in the coming years. What sources and types of urban multipath are the most detrimental to geodetic GPS positioning? Which reflecting objects are assumed to be a major source of multipath error, but the GPS data show otherwise? Are certain reflecting environments worse for specific applications, i.e. kinematic vs. static positioning? If forced to install a GNSS station in a highly reflective environment, is it possible to rank objects for their multipath severity? To answer these questions, we provide multipath examples taken from continuously- operating GNSS stations sited in urban environments. We concentrate on some of the most common obstacles and reflecting objects for urban sites - rooftops, parking lots, and fences. We analyze the multipath signature of these objects as manifested in the GPS phase, pseudorange, and signal-to-noise ratio (SNR) observables, and also examine multipath impacts on the precision and accuracy of GPS-derived positions.

  13. Multipath Binomial Congestion Control Algorithms

    NASA Astrophysics Data System (ADS)

    Le, Tuan Anh; Hong, Choong Seon; Lee, Sungwon

    Nowadays portable devices with multiple wireless interfaces and using multimedia services are becoming more popular on the Internet. This paper describes a family of multipath binomial congestion control algorithms for audio/video streaming, where a low variant of transmission rate is important. We extend the fluid model of binomial algorithms for single-path transmission to support the concurrent transmission of packets across multiple paths. We focus on the extension of two particular algorithms, SQRT and IIAD, for multiple paths, called MPSQRT and MPIIAD, respectively. Additionally, we apply the design technique (using the multipath fluid model) for multipath TCP (MPTCP) into the extension of SQRT and IIAD, called fbMPSQRT and fbMPIIAD, respectively. Both two approaches ensure that multipath binomial congestion control algorithms achieve load-balancing, throughput improvement, and fairness to single-path binomial algorithms at shared bottlenecks. Through the simulations and comparison with the uncoordinated protocols MPSQRT/MPIIAD, fbMPSQRT/fbMPIIAD and MPTCP, we find that our extended multipath transport protocols can preserve lower latency and transmission rate variance than MPTCP, fairly share with single-path SQRT/IIAD, MPTCP and TCP, and also can achieve throughput improvements and load-balancing equivalent to those of MPTCP under various scenarios and network conditions.

  14. An optimized node-disjoint multipath routing scheme in mobile ad hoc

    NASA Astrophysics Data System (ADS)

    Yu, Yang; Liang, Mangui; Liu, Zhiyu

    2016-02-01

    In mobile ad hoc networks (MANETs), link failures are caused frequently because of node’s mobility and use of unreliable wireless channels for data transmission. Multipath routing strategy can cope with the problem of the traffic overloads while balancing the network resource consumption. In the paper, an optimized node-disjoint multipath routing (ONMR) protocol based on ad hoc on-demand vector (AODV) is proposed to establish effective multipath to enhance the network reliability and robustness. The scheme combines the characteristics of reverse AODV (R-AODV) strategy and on-demand node-disjoint multipath routing protocol to determine available node-disjoint routes with minimum routing control overhead. Meanwhile, it adds the backup routing strategy to make the process of data salvation more efficient in case of link failure. The results obtained through various simulations show the effectiveness of the proposed scheme in terms of route availability, control overhead and packet delivery ratio.

  15. Space Station GPS Multipath Analysis and Validation

    NASA Technical Reports Server (NTRS)

    Hwu, Shian U.; Loh, Y. C.

    1999-01-01

    To investigate the multipath effects on the International Space Station (ISS) Global Positioning System (GPS) measurement accuracy, experimental and computational investigations were performed to estimate the carrier phase errors due to multipath. A new modeling approach is used to reduce the required computing time by separating the dynamic structure elements from the static structure elements in the multipath computations. This study confirmed that the multipath is a major error source to the ISS GPS performance and can possibly degrade the attitude determination solution. It is demonstrated that the GPS antenna carrier phase errors due to multipath can be analyzed using the electromagnetic modeling technique such as the Uniform Geometrical Theory of Diffraction (UTD).

  16. Multipath noise reduction spread spectrum signals

    NASA Technical Reports Server (NTRS)

    Meehan, Thomas K. (Inventor)

    1994-01-01

    The concepts of early-prompt delay tracking, multipath correction of early-prompt delay tracking from correlation shape, and carrier phase multipath correction are addressed. In early-prompt delay tracking, since multipath is always delayed with respect to the direct signals, the system derives phase and pseudorange observables from earlier correlation lags. In multipath correction of early-prompt delay tracking from correlation shape, the system looks for relative variations of amplitude across the code correlation function that do not match the predicted multipath-free code cross-correlation shape. The system then uses deviations from the multipath-free shape to infer the magnitude of multipath, and to generate corrections pseudorange observables. In carrier phase multipath correction, the system looks for variations of phase among plural early and prompt lags. The system uses the measured phase variations, along with the general principle that the multipath errors are larger for later lags, to infer the presence of multipath, and to generate corrections for carrier-phase observables.

  17. The distances covered by basketball referees in a match increase throughout the competition phases, with no change in physiological demand.

    PubMed

    Borin, João Paulo; Daniel, José Francisco; Bonganha, Valéria; de Moraes, Anderson Marques; Cavaglieri, Cláudia Regina; Mercadante, Luciano Allegretti; da Silva, Marcos Tadeu Nolasco; Montagner, Paulo Cesar

    2013-01-01

    It is crucial to know the demands on basketball referees, in different match periods (MPs) and phases of competition, for planning referee training and subsequent successful refereeing. To measure and evaluate the distance covered by referees in a match by measuring the number of interruptions, percentage of heart rate (%HR), and blood lactate concentration ([lac]) in different phases of competition and in different MPs. We studied the qualifying (QP), semifinal (SP), and final (FP) phases of a total of 12 matches (four matches in each phase) of the 2009-2010 Brazilian Basketball League. Distance covered, number of match interruptions, and referees' %HR and [lac] were analyzed. We compared the results between competition phases and between MPs (1st MP, 2nd MP, 3rd MP, and 4th MP). Regarding the distances covered, we observed significant differences (P < 0.05) in the 1st, 2nd, and 3rd MPs between the FP and the other two phases (SP and QP) throughout the match, between each phase; in the 4th MP, a significant difference was found when comparing the QP and the other two phases. Comparing the periods within each phase, we found that a greater distance was covered in the 4th MP in relation to the 3rd MP during the FP. No significant differences were found among the remaining variables. The distances covered by referees in a basketball match increase throughout competition phases. This information is essential for planning of training and for the subsequent success of a referee.

  18. Multipath ultrasonic flow meters for gas measurement

    SciTech Connect

    Saunders, M.P.

    1995-11-01

    This paper gives an introduction to the practical application of ultrasonic gas flow meters. A general outline of the theory and methods applied using multipath flow meters. The multi-path type meter provides state of the art gas flow measurements and its accuracy and reliability satisfy the requirements for custody transfer. A typical multi-path device can achieve accuracies better than 0.2%.

  19. The distances covered by basketball referees in a match increase throughout the competition phases, with no change in physiological demand

    PubMed Central

    Borin, João Paulo; Daniel, José Francisco; Bonganha, Valéria; de Moraes, Anderson Marques; Cavaglieri, Cláudia Regina; Mercadante, Luciano Allegretti; da Silva, Marcos Tadeu Nolasco; Montagner, Paulo Cesar

    2013-01-01

    Background It is crucial to know the demands on basketball referees, in different match periods (MPs) and phases of competition, for planning referee training and subsequent successful refereeing. Objective To measure and evaluate the distance covered by referees in a match by measuring the number of interruptions, percentage of heart rate (%HR), and blood lactate concentration ([lac]) in different phases of competition and in different MPs. Method We studied the qualifying (QP), semifinal (SP), and final (FP) phases of a total of 12 matches (four matches in each phase) of the 2009–2010 Brazilian Basketball League. Distance covered, number of match interruptions, and referees’ %HR and [lac] were analyzed. We compared the results between competition phases and between MPs (1st MP, 2nd MP, 3rd MP, and 4th MP). Results Regarding the distances covered, we observed significant differences (P < 0.05) in the 1st, 2nd, and 3rd MPs between the FP and the other two phases (SP and QP) throughout the match, between each phase; in the 4th MP, a significant difference was found when comparing the QP and the other two phases. Comparing the periods within each phase, we found that a greater distance was covered in the 4th MP in relation to the 3rd MP during the FP. No significant differences were found among the remaining variables. Conclusion The distances covered by referees in a basketball match increase throughout competition phases. This information is essential for planning of training and for the subsequent success of a referee. PMID:24379725

  20. Multipath Routing Algorithm Applied to Cloud Data Center Services

    NASA Astrophysics Data System (ADS)

    Matsuura, Hiroshi

    Cloud data center services, such as video on demand (VoD) and sensor data monitoring, have become popular. The quality of service (QoS) between a client and a cloud data center should be assured by satisfying each service's required bandwidth and delay. Multipath traffic engineering is effective for dispersing traffic flows on a network; therefore, an improved k-shortest paths first (k-SPF) algorithm is applied to these cloud data center services to satisfy their required QoS. k-SPF can create a set of multipaths between a cloud data center and all edge routers, to which client nodes are connected, within one algorithm process. Thus, k-SPF can produce k shortest simple paths between a cloud data center and every access router faster than with conventional Yen's algorithm. By using a parameter in the algorithm, k-SPF can also impartially use links on a network and shorten the average hop-count and number of necessary MPLS labels for multiple paths that comprise a multipath.

  1. Doppler-multipath tolerant voice communication

    NASA Astrophysics Data System (ADS)

    Harris, R. M.

    Line of sight communication between high performance aircraft has been found to be subject to a peculiar form of multipath radio wave propagation - Doppler multipath. It degrades analogue voice reception on the standard fit ultrahigh frequency radio, producing low frequency random noise and warbling. Various modifications were carried out on the aircraft's communications system, but the problem remained. All the evidence points to a natural phenomenon. The reported observations are corroborated by theoretical studies and laboratory simulations of multipath radio wave propagation between two points moving relative to a diffusely scattering reflector. Theoretical predictions of Rician fading have explained the disruption of speech transmitted using conventional dsb(am) modulation. This also indicated suppressing the carrier as a radical cure. Double sideband suppressed carrier radios have been developed for airborne evaluation in comparison with standard dsb(am). The air to air flying trials proved the superior performance of the suppressed carrier system under conditions of Doppler multipath.

  2. Reduction of Kinematic Short Baseline Multipath Effects Based on Multipath Hemispherical Map

    PubMed Central

    Cai, Miaomiao; Chen, Wen; Dong, Danan; Song, Le; Wang, Minghua; Wang, Zhiren; Zhou, Feng; Zheng, Zhengqi; Yu, Chao

    2016-01-01

    Multipath hemispherical map (MHM) is a kind of multipath mitigation approach that takes advantage of the spatial repeatability of the multipath effect under an unchanged environment. This approach is not only suitable for static environments, but also for some kinematic platforms, such as a moving ship and airplane, where the dominant multipath effects come from the platform itself and the multipath effects from the surrounding environment are considered minor or negligible. Previous studies have verified the feasibility of the MHM approach in static environments. In this study, we expanded the MHM approach to a kinematic shipborne environment. Both static and kinematic tests were carried out to demonstrate the feasibility of the MHM approach. The results indicate that, after MHM multipath mitigation, the root mean square (RMS) of baseline length deviations are reduced by 10.47% and 10.57%, and the RMS of residual values are reduced by 39.89% and 21.91% for the static and kinematic tests, respectively. Power spectrum analysis has shown that the MHM approach is more effective in mitigating multipath in low-frequency bands; the high-frequency multipath effects still exist, and are indistinguishable from observation noise. Taking the observation noise into account, the residual reductions increase to 41.68% and 24.51% in static and kinematic tests, respectively. To further improve the performance of MHM for kinematic platforms, we also analyzed the influence of spatial coverage and resolution on residual reduction. PMID:27754322

  3. BOC(n,n) signal multipath mitigation using MEDLL technology

    NASA Astrophysics Data System (ADS)

    Su, Xuan; Zhang, Yanmei; Su, Lianqing; Guo, Haichao

    2015-11-01

    For satellite navigation and positioning receivers are susceptible to the influence of the multipath, this paper used multipath estimating delay lock loop (MEDLL) technology for BOC (n, n) multipath signal tracking. Through the analysis of multipath signal model, it is concluded that all the multipath signal can be expressed by its amplitude, phase and delay. Then in odor to get the accurate direct signal, this paper applied MEDLL algorithm to estimate the received signal. Finally, the simulation show that this algorithm can realize multipath signal track demodulation and accurate data demodulation under a low signal noise ratio environment (SNR= -20db).

  4. Surface Wave Multipath Signals in Near-Field Microwave Imaging

    PubMed Central

    Meaney, Paul M.; Shubitidze, Fridon; Fanning, Margaret W.; Kmiec, Maciej; Epstein, Neil R.; Paulsen, Keith D.

    2012-01-01

    Microwave imaging techniques are prone to signal corruption from unwanted multipath signals. Near-field systems are especially vulnerable because signals can scatter and reflect from structural objects within or on the boundary of the imaging zone. These issues are further exacerbated when surface waves are generated with the potential of propagating along the transmitting and receiving antenna feed lines and other low-loss paths. In this paper, we analyze the contributions of multi-path signals arising from surface wave effects. Specifically, experiments were conducted with a near-field microwave imaging array positioned at variable heights from the floor of a coupling fluid tank. Antenna arrays with different feed line lengths in the fluid were also evaluated. The results show that surface waves corrupt the received signals over the longest transmission distances across the measurement array. However, the surface wave effects can be eliminated provided the feed line lengths are sufficiently long independently of the distance of the transmitting/receiving antenna tips from the imaging tank floor. Theoretical predictions confirm the experimental observations. PMID:22566992

  5. Simulation of the TDRS multipath environment

    NASA Technical Reports Server (NTRS)

    Baghdady, E. J.; Ghais, A. F.; Wachsman, R. H.

    1970-01-01

    Design principles and implementation methods are discussed for simulating the propagation path between a tracking and data relay satellite and a mission spacecraft. The emphasis is on multipath and Doppler simulation but additive disturbances are also considered. The recommended form of the simulator is fed separately with the unmodulated carrier, the unmodulated subcarriers (or spread-spectrum components) and the data signals. The perturbations are also introduced separately; then successive modulation operations are performed. The simulator is segmented into elements that perform the various functions of direct and specular multipath, diffuse fading, Doppler shift and delay spread. Delay spreads are realized by discrete delays operating on baseband signals. Doppler simulation and ionospheric or diffuse multipath fading are applied to individual paths before or after modulation of the carrier by delayed baseband signals. Block diagrams are presented on how the different elements are combined to create a complete channel simulator.

  6. The Impact of the Current Economic Crisis on the Demand for Higher Education: An Analysis of Spanish Distance Education Universities

    ERIC Educational Resources Information Center

    Reina-Paz, María Dolores; Rodríguez-Oromendía, Ainhoa; Sevilla-Sevilla, Claudia

    2012-01-01

    Spain is currently experiencing a difficult economic situation, and in recent years a significant change has been observed in the behavior of the demand for educational programs as a result of this situation. Recent studies reveal a change in student demand that does not have the same effect on all academic institutions. Bearing this behavior in…

  7. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III

    1976-01-01

    The design of a microwave landing system (MLS) aircraft receiver, capable of optimal performance in multipath environments found in air terminal areas, is reported. Special attention was given to the angle tracking problem of the receiver and includes tracking system design considerations, study and application of locally optimum estimation involving multipath adaptive reception and then envelope processing, and microcomputer system design. Results show processing is competitive in this application with i-f signal processing performance-wise and is much more simple and cheaper. A summary of the signal model is given.

  8. An Adaptive Multipath Mitigation Filter for GNSS Applications

    NASA Astrophysics Data System (ADS)

    Chang, Chung-Liang; Juang, Jyh-Ching

    2008-12-01

    Global navigation satellite system (GNSS) is designed to serve both civilian and military applications. However, the GNSS performance suffers from several errors, such as ionosphere delay, troposphere delay, ephemeris error, and receiver noise and multipath. Among these errors, the multipath is one of the most unpredictable error sources in high-accuracy navigation. This paper applies a modified adaptive filter to reduce code and carrier multipath errors in GPS. The filter employs a tap-delay line with an Adaline network to estimate the direction and the delayed-signal parameters. Then, the multipath effect is mitigated by subtracting the estimated multipath effects from the processed correlation function. The hardware complexity of the method is also compared with other existing methods. Simulation results show that the proposed method using field data has a significant reduction in multipath error especially in short-delay multipath scenarios.

  9. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III; Tzeng, C. P. J.; Koleyni, G.

    1978-01-01

    Reduced order receiver (suboptimal receiver) analysis in multipath environments is presented. The origin and objective of MLS is described briefly. Signal modeling in MLS the optimum receiver is also included and a description of a computer oriented technique which was used in the simulation study of the suboptimal receiver is provided. Results and conclusion obtained from the research for the suboptimal receiver are reported.

  10. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III; Irwin, S. H.; Padgett, J. E.

    1975-01-01

    A receiver is designed for aircraft (A/C), which, as a component of the proposed Microwave Landing System (MLS), is capable of optimal performance in the multipath environments found in air terminal areas. Topics discussed include: the angle-tracking problem of the MLS receiver; signal modeling; preliminary approaches to optimal design; suboptimal design; and simulation study.

  11. A highly directional transducer for multipath mitigation in high-frequency underwater acoustic communications.

    PubMed

    Freeman, Simon E; Emokpae, Lloyd; Nicholas, Michael; Edelmann, Geoffrey F

    2015-08-01

    This paper presents a transducer design of the hollow cylinder type designed to minimize transmission multipath and the need for channel equalization over short acoustic communication distances in shallow water. Operating at 750 kHz, the half-maximum envelope of the main lobe is approximately 3°. The transducer was incorporated into a low-complexity modem system in which it acted as both transmitter and receiver. At-sea testing indicated that the system is capable of operating over horizontal distances of 5 m without evidence of multipath distortion. The system was also found to be effective as an omnidirectional transmitter/receiver in the 10-60 kHz band.

  12. Model P Wave Multipathing at Regional Distances in Southeast Asia

    DTIC Science & Technology

    2008-06-09

    that of Niazi & Anderson (1965). These authors used data recorded at the Tonto Forest array in Arizona to measure dt/d∆ for 70 shallow events...and 640 km respectively. The example seismograms 9 presented in Niazi & Anderson (1965) show clear later arrivals, but the au- thors were unable to...misinterpreting depth phases as triplicated arrivals. However, the potential value of these arrivals was recognized, with the final sentence of Niazi & Anderson

  13. Multipath Propagation over Snow at Millimeter Wavelengths,

    DTIC Science & Technology

    1980-02-01

    Propagation Branch Electromagnetic Sciences Division APPROVED: ALLAN C. SCHELL , Chief Electromagnetic Sciences Division FOR THE COMANDER: JOHN P...type of snow cover. A computer program was developed in order to model the reflection as a specular process, with the underlying terrain represented...data. 2,B’ 3II Contents 1. INTRODUCTION 9 2. ANALYSIS OF MULTIPATH PROPAGATION 10 2. 1 Propagation Mechanisms 12 2.2 Model Calculations for Flat Terrain

  14. Global Positioning System Multipath Reduction with Correlator Beamforming

    DTIC Science & Technology

    2014-03-14

    GPS MULTIPATH REDUCTION WITH CORRELATOR BEAMFORMING THESIS Jason M. Barhorst, Captain, USAF AFIT-ENG-14-M-10 DEPARTMENT OF THE AIR FORCE AIR...in the United States. AFIT-ENG-14-M-10 GPS MULTIPATH REDUCTION WITH CORRELATOR BEAMFORMING THESIS Presented to the Faculty Department of Electrical...March 2014 DISTRIBUTION STATEMENT A APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. AFIT-ENG-14-M-10 GPS MULTIPATH REDUCTION WITH CORRELATOR

  15. A New Synthetic Aperture Sonar Design with Multipath Mitigation

    NASA Astrophysics Data System (ADS)

    Pinto, Marc; Bellettini, Andrea; Wang, Lian Sheng; Munk, Peter; Myers, Vincent; Pautet, Lucie

    2004-11-01

    Sonar performance in shallow water is severely degraded by multipath which reduces image contrast and degrades the performance of interferometric processing. This is an important limitation for high resolution applications such as minehunting, where target recognition exploits chiefly the shape and size of the target shadow. Experimental data showing the nature and importance of the multipath is presented together with a new sonar design, optimized to achieve a high level of multipath rejection at large range to water depth ratio.

  16. Control of Multipath TCP and Optimization of Multipath Routing in the Internet

    NASA Astrophysics Data System (ADS)

    Wischik, Damon; Handley, Mark; Raiciu, Costin

    There are moves in the Internet architecture community to add multipath capabilities to TCP, so that end-systems will be able to shift their traffic away from congested parts of the network. We study two problems relating to the design of multipath TCP. (i) We investigate stochastic packet-level behaviour of some proposed multipath congestion control algorithms, and find that they do not behave how we might expect from fluid modeling: they tend to flap randomly between their available paths. We explain why, and propose a congestion control algorithm that does not flap. (ii) We consider how the path choice offered by the network affects the ability of end-systems to shift their traffic between a pool of resources. We define a 'resource poolability' metric, which measures for each resource how easy it is for traffic to be shifted away from that resource e.g. in the event of a traffic surge or link failure.

  17. Analysis of Multipath Pixels in SAR Images

    NASA Astrophysics Data System (ADS)

    Zhao, J. W.; Wu, J. C.; Ding, X. L.; Zhang, L.; Hu, F. M.

    2016-06-01

    As the received radar signal is the sum of signal contributions overlaid in one single pixel regardless of the travel path, the multipath effect should be seriously tackled as the multiple bounce returns are added to direct scatter echoes which leads to ghost scatters. Most of the existing solution towards the multipath is to recover the signal propagation path. To facilitate the signal propagation simulation process, plenty of aspects such as sensor parameters, the geometry of the objects (shape, location, orientation, mutual position between adjacent buildings) and the physical parameters of the surface (roughness, correlation length, permittivity)which determine the strength of radar signal backscattered to the SAR sensor should be given in previous. However, it's not practical to obtain the highly detailed object model in unfamiliar area by field survey as it's a laborious work and time-consuming. In this paper, SAR imaging simulation based on RaySAR is conducted at first aiming at basic understanding of multipath effects and for further comparison. Besides of the pre-imaging simulation, the product of the after-imaging, which refers to radar images is also taken into consideration. Both Cosmo-SkyMed ascending and descending SAR images of Lupu Bridge in Shanghai are used for the experiment. As a result, the reflectivity map and signal distribution map of different bounce level are simulated and validated by 3D real model. The statistic indexes such as the phase stability, mean amplitude, amplitude dispersion, coherence and mean-sigma ratio in case of layover are analyzed with combination of the RaySAR output.

  18. GPS integrity monitoring and multipath error distributions

    NASA Technical Reports Server (NTRS)

    Skidmore, Trent A.; Vangraas, Frank

    1995-01-01

    The ability to perform integrity monitoring of a differential Global Positioning System (DGPS) precision approach system is dependent upon the form of monitor used and the various noise sources acting on the reference station, the monitor, and the approaching aircraft. This paper focuses on how multipath and assumptions about its probability density function (pdf) affect the availability of the integrity monitoring function. Also discussed is a technique specified as code/carrier integrity monitoring which can be used to greatly improve integrity monitoring availability over methods employing conventional C/A-code operations.

  19. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III

    1979-01-01

    The angle tracking problems in microwave landing system receivers along with a receiver design capable of optimal performance in the multipath environments found in air terminal areas were studied. Included were various theoretical and evaluative studies like: (1) signal model development; (2) derivation of optimal receiver structures; and (3) development and use of computer simulations for receiver algorithm evaluation. The development of an experimental receiver for flight testing is presented. An overview of the work and summary of principal results and conclusions are reported.

  20. Mitigation of multipath in DGPS ground reference stations

    NASA Technical Reports Server (NTRS)

    Braasch, Michael S.; Van Graas, Frank

    1992-01-01

    Multipath represents one of the most serious threats to accuracy in Differential GPS (DGPS). The theoretical foundations of multipath are presented and several multipath mitigation techniques are reviewed. Special emphasis is placed on signal diffraction methods. Reflections enter peaks and nulls in the distorted antenna pattern in a random manner. This, coupled with the oscillations in relative phase (with respect to the direct signal), results in a multipath error signature which is noise-like. Since it is noise-like, it may be significantly reduced by averaging the code phase measurements against the more stable carrier-phase measurements. Exploitation of this effect to reduce multipath error represents a significant increase in accuracy for real time DGPS. Experiments have been performed which verify these conclusions.

  1. Long-Range Atlantic Acoustic Multipath Identification.

    NASA Astrophysics Data System (ADS)

    Legters, George Richard

    Multipath data from three long-range (900 kilometers) transmissions are examined. Two of the transmissions follow similar tracks, but are separated by the Gulf Stream at the receiving end. The third, which is substantially free of Gulf Stream influence, has been intensively studied Spiesberger et al. (J. Acoust. Soc. Am. 67, 2011-7 (1980)). A package of computer algorithms based on the geometrical optics approximation was developed to model and analyze the acoustic transmission. Path identification with ray calculations was attempted for the two transmission channels exhibiting stable multipath with success for the major features of the path structures. Excessive smoothing of the sound speed profile which eliminates the influence of the Atlantic eighteen-degree celsius water mass in the upper layers is shown to degrade the identification of early arrivals. The slight curvature of the ocean sound speed profile around four kilometers of depth also was critical to early arrival identification. The effect of weak range dependence was small while the effect of a gradual sloping bottom near one receiver was significant.

  2. Efficient Multipath Diversity Receiver for STBC Block Transmission System

    NASA Astrophysics Data System (ADS)

    Wang, Jieling; Yang, Hong; Yi, Kechu

    A space-time and multipath diversity combining algorithm is presented for STBC single carrier block transmission system with two transmit and one receive antennas. The initial solution is achieved by an STBC-based frequency domain equalizer, and the multipath components in the received signal are decoupled by this initial solution and channel state information. Finally, STBC combining is carried out on each decoupled multipath component separately, and then the single carrier output branches are combined further using the maximal ratio combining (MRC) algorithm.

  3. Limitations on Ku-band communications due to multipath

    NASA Technical Reports Server (NTRS)

    Lindsey, J. F.; Rudnicki, J. F.

    1977-01-01

    The earth and orbiter body reflections involving the Tracking Data Relay Satellite (TDRS)/orbiter communications link are evaluated. Recommendations address operational conditions in order to avoid critical multipath impacts, modulation preferences during acquisition, and preferred scan limit implementation.

  4. Measurement of multipath delay profile in land mobile satellite channels

    NASA Technical Reports Server (NTRS)

    Ikegami, Tetsushi; Arakaki, Yoshiya; Wakana, Hiromitsu; Suzuki, Ryutaro

    1993-01-01

    Mobile satellite communication channel has been evaluated mainly with fading statistics of signal. When bandwidth of transmitting signal becomes wider, frequency selectivity of fading becomes a significant factor of the channel. Channel characteristics, not only signal variation but multipath delay spread should be evaluated. A multipath measurement system is proposed and developed for mobile satellite applications. With this system and ETS-V satellite, multipath delay profiles are measured in various environments including Tokyo metropolis and Sapporo city at 1.5 GHz. Results show that the maximum excess delay is within 1 microsec and the maximum delay spread is 0.2 microsecs at elevation angles of 40 to 47 degrees. In wideband signal transmission of about 1 MHz and more, designers should consider the effect of selective fading due to the multipath of land mobile satellite channel.

  5. Multipath Propagation for Helicopter-to-Ground MIMO Links

    DTIC Science & Technology

    2011-06-02

    AFFTC-PA-11118 Multipath Propagation for Helicopter-to-Ground MIMO Links Michael Rice, Michael Jensen AIR FORCE FLIGHT TEST CENTER...EDWARDS AFB, CA June 2, 2011 A F F T C m Approved for public release; distribution is unlimited. AIR FORCE FLIGHT TEST CENTER...TITLE AND SUBTITLE Multipath Propagation for Helicopter-to-Ground MIMO Links 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

  6. Methods and Apparatus for Reducing Multipath Signal Error Using Deconvolution

    NASA Technical Reports Server (NTRS)

    Kumar, Rajendra (Inventor); Lau, Kenneth H. (Inventor)

    1999-01-01

    A deconvolution approach to adaptive signal processing has been applied to the elimination of signal multipath errors as embodied in one preferred embodiment in a global positioning system receiver. The method and receiver of the present invention estimates then compensates for multipath effects in a comprehensive manner. Application of deconvolution, along with other adaptive identification and estimation techniques, results in completely novel GPS (Global Positioning System) receiver architecture.

  7. On the technology of aerospace communication in multipath.

    NASA Technical Reports Server (NTRS)

    Painter, J. H.; Gupta, S. C.; Wilson, L. R.

    1972-01-01

    The mechanism, effects, and modelling of multipath propagation, caused by rough earth reflection, are examined for aerospace communication. Emphasis is on binary digital signalling for aircraft and hybrid vehicles, such as Shuttle. The cases of direct Air-Ground and satellite relay (Aerosat) are treated. The recursive, adaptive, coherent Bayes detector for binary phase-shift-keying in nonselective multipath is presented. The derivation for the frequency-shift-keying detector is indicated.

  8. Crystal Diagnostics MultiPath System™.

    PubMed

    Stumpf, Curtis H; Zhao, Weidong; Bullard, Brian; Ammons, Christine; Devlin, Karl I; Niehaus, Gary D

    2014-01-01

    The Crystal Diagnostics MultiPath System™ provides rapid detection of Escherichia coli O157 in fresh raw ground beef, raw beeftrim, and spinach. The Crystal Diagnostics system combines patented Liquid Crystal technology with antibody-coated paramagnetic microspheres to selectively capture and detect E. coli O157 in food matrixes. This is the only liquid crystal-based biosensor commercially available for the detection of pathogens. The Crystal Diagnostics system expeditiously provides the sensitivity and accuracy of the U.S. Department of Agriculture Food Safety Inspection Service (USDA-FSIS) and the U.S. Food and Drug Administration Bacteriological Analytical Manual (FDA-BAM) methods for detecting as low as one CFU of E. coli O157 per 375 g of raw ground beef and raw beef trim, or 200 g of raw spinach. An internal inclusivity validation demonstrated detection of all 50 tested strains of . coli O157. The internal and independent laboratory tests demonstrate that the method is rapid and sensitive for detecting of E. coli O157 in fresh raw ground beef, beef trim, and spinach.

  9. Geoacoustic inversion using multipath pulse shape.

    PubMed

    Prior, Mark K; Harrison, Chris H; Nielsen, Peter L

    2007-12-01

    Experimental data, measured in a shallow water region of the Mediterranean Sea, are used to show that the variation of received intensity with time is well described by existing expressions [Harrison and Nielsen, J. Acoust. Soc. Am. 121, 1362-1373 (2007)]. These expressions indicate that the effect of the sea-water sound speed profile can be neglected for times greater than the peak intensity arrival. Beyond this time, intensity is shown to decay at a rate determined by the seabed acoustic properties in a manner very similar to that for an isovelocity water column. It is shown that a method of determining seabed acoustic properties, previously restricted to isovelocity water columns [Prior and Harrison, J. Acoust. Soc. Am. 116, 1341-1344 (2004)], can consequently be used in the presence of a sound-speed profile. The method relates the decay rate of smeared multipath arrivals to the angular derivative of seabed reflection loss. Two datasets are studied and the method is used to describe average seabed properties and to detect changes in seabed type. The seabed descriptions thus derived are used to predict total received intensity as a function of source-receiver separation. Agreement between the propagation measurements and predictions is shown to be within measurement uncertainties.

  10. Multipath routing in wireless sensor networks: survey and research challenges.

    PubMed

    Radi, Marjan; Dezfouli, Behnam; Abu Bakar, Kamalrulnizam; Lee, Malrey

    2012-01-01

    A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

  11. Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

    PubMed Central

    Radi, Marjan; Dezfouli, Behnam; Bakar, Kamalrulnizam Abu; Lee, Malrey

    2012-01-01

    A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks. PMID:22368490

  12. Pseudorage Multipath Estimation and Analysis at the GPS Rgna Network

    NASA Astrophysics Data System (ADS)

    Vazquez, G. E.; Barron, M. A.

    2010-12-01

    A research study was conducted to evaluate the amount of pseudorange multipath at GPS sites in the National Active Geodetic Network (RGNA) that is administrated by the National Institute of Statistics, Geography and Informatics (INEGI) of México, which supports three dimensional positioning for public users. The RGNA Network consists of 20 GPS stations located throughout México, where double difference geodetic-grade receivers collect GPS data continuously the 365 days of the year. It is well known that, despite carefully selected locations, the GPS stations are to some extent, affected by the presence of multipath. Furthermore, it is very feasible that for RGNA users that relied on precise measurements of pseudorange observables, the existence of pseudorange multipath could affect any type of related application for a short period of time. Thus, in order to identify the most and the least affected stations, the pseudorange multipath (MP1 and MP2) and the daily root mean square (rms-MP1 and rms-MP2) variations were estimated and analyzed at each GPS site of the RGNA Network. The GPS data processing was performed using the public software TEQC (Test of Quality Check) by UNAVCO and the pseudorange multipath analysis is presented at each site over a year basis (in terms of time-series) considering the data span from year 2005 (doy 265) to year 2010 (doy 300).

  13. Estimating Effects of Multipath Propagation on GPS Signals

    NASA Technical Reports Server (NTRS)

    Byun, Sung; Hajj, George; Young, Lawrence

    2005-01-01

    Multipath Simulator Taking into Account Reflection and Diffraction (MUSTARD) is a computer program that simulates effects of multipath propagation on received Global Positioning System (GPS) signals. MUSTARD is a very efficient means of estimating multipath-induced position and phase errors as functions of time, given the positions and orientations of GPS satellites, the GPS receiver, and any structures near the receiver as functions of time. MUSTARD traces each signal from a GPS satellite to the receiver, accounting for all possible paths the signal can take, including all paths that include reflection and/or diffraction from surfaces of structures near the receiver and on the satellite. Reflection and diffraction are modeled by use of the geometrical theory of diffraction. The multipath signals are added to the direct signal after accounting for the gain of the receiving antenna. Then, in a simulation of a delay-lock tracking loop in the receiver, the multipath-induced range and phase errors as measured by the receiver are estimated. All of these computations are performed for both right circular polarization and left circular polarization of both the L1 (1.57542-GHz) and L2 (1.2276-GHz) GPS signals.

  14. Glistening-region model for multipath studies

    NASA Astrophysics Data System (ADS)

    Groves, Gordon W.; Chow, Winston C.

    1998-07-01

    The goal is to achieve a model of radar sea reflection with improved fidelity that is amenable to practical implementation. The geometry of reflection from a wavy surface is formulated. The sea surface is divided into two components: the smooth `chop' consisting of the longer wavelengths, and the `roughness' of the short wavelengths. Ordinary geometric reflection from the chop surface is broadened by the roughness. This same representation serves both for forward scatter and backscatter (sea clutter). The `Road-to-Happiness' approximation, in which the mean sea surface is assumed cylindrical, simplifies the reflection geometry for low-elevation targets. The effect of surface roughness is assumed to make the sea reflection coefficient depending on the `Deviation Angle' between the specular and the scattering directions. The `specular' direction is that into which energy would be reflected by a perfectly smooth facet. Assuming that the ocean waves are linear and random allows use of Gaussian statistics, greatly simplifying the formulation by allowing representation of the sea chop by three parameters. An approximation of `low waves' and retention of the sea-chop slope components only through second order provides further simplification. The simplifying assumptions make it possible to take the predicted 2D ocean wave spectrum into account in the calculation of sea-surface radar reflectivity, to provide algorithms for support of an operational system for dealing with target tracking in the presence of multipath. The product will be of use in simulated studies to evaluate different trade-offs in alternative tracking schemes, and will form the basis of a tactical system for ship defense against low flyers.

  15. A multipath self-routing switch

    SciTech Connect

    Henrion, M.A.; Eilenberger, G.J.; Petit, G.H.; Parmentier, P.H.

    1993-04-01

    The multipath, self-routing technique associated with a multislot cell transfer mode reduces the switching element complexity and allows for realization of all its functions in a single-chip ISE of relatively large size. The described design work demonstrates the feasibility of the switching technology fully supporting the MPSR switching architecture with its first implementation based on the ISE 16 x 16 VLSI and switch module 64 x 64 the board at the leading edge of advanced technology. The MPSR switch fabric is upward compatible with the target ISE 32 x 32 and SM128 switching technology. Two levels of distributed control resources have been incorporated in the MPSR transport equipment. The OBC per individual PBA (switch module or link termination board), together with the MTR, controls and monitors all transport functions of the on-board VLSI circuits, and provides high-speed control communication capabilities with other RCC/OBC controllers via the switch fabric. The RCC in each rack controls and supervises the OBCs of boards equipped in that rack, autonomously performs configuration management, maintenance, traffic monitoring, and internal connection control functions closely related to the ATM transport equipment. It provides a loose coupling interface with CSs in charge of communication services and global OAM functions. The expandable MPSR switch fabric supported by its embedded distributed controllers exhibit high throughput/delay performance. We have presented results on the ISE buffer size engineering for 10[sup [minus]10] overall through-switch cell loss ratio based on analytical methods verified by extensive simulations, on the derived total cell transfer delay (79/246 [mu]s for average/maximum delay), and on the engineering of the output buffer capacity. 4 refs., 6 figs.

  16. Fast sparsity adaptive multipath matching pursuit for compressed sensing problems

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaofang; Du, Hongwei; Qiu, Bensheng; Chen, Shanshan

    2017-05-01

    The high computational complexity of tree-based multipath search approaches makes putting them into practical use difficult. However, reselection of candidate atoms could make the search path more accurate and efficient. We propose a multipath greedy approach called fast sparsity adaptive multipath matching pursuit (fast SAMMP), which performs a sparsity adaptive tree search to find the sparsest solution with better performances. Each tree branch acquires K atoms, and fast SAMMP reselects the best K atoms among 2K atoms. Fast SAMMP adopts sparsity adaptive techniques that allow more practical applications for the algorithm. We demonstrated the reconstruction performances of the proposed fast scheme on both synthetically generated one-dimensional signals and two-dimensional images using Gaussian observation matrices. The experimental results indicate that fast SAMMP achieves less reconstruction time and a much higher exact recovery ratio compared with conventional algorithms.

  17. Effectiveness of Convolutional Code in Multipath Underwater Acoustic Channel

    NASA Astrophysics Data System (ADS)

    Park, Jihyun; Seo, Chulwon; Park, Kyu-Chil; Yoon, Jong Rak

    2013-07-01

    The forward error correction (FEC) is achieved by increasing redundancy of information. Convolutional coding with Viterbi decoding is a typical FEC technique in channel corrupted by additive white gaussian noise. But the FEC effectiveness of convolutional code is questioned in multipath frequency selective fading channel. In this paper, how convolutional code works in multipath channel in underwater, is examined. Bit error rates (BER) with and without 1/2 convolutional code are analyzed based on channel bandwidth which is frequency selectivity parameter. It is found that convolution code performance is well matched in non selective channel and also effective in selective channel.

  18. Multipath Metropolis simulation: An application to the classical Heisenberg model

    NASA Astrophysics Data System (ADS)

    Rakić, Predrag S.; Radošević, Slobodan M.; Mali, Petar M.; Stričević, Lazar M.; Petrić, Tara D.

    2016-01-01

    This study explores the Multipath Metropolis simulation of the classical Heisenberg model. Unlike the standard single-path algorithm, the Metropolis algorithm applied to multiple random-walk paths becomes an embarrassingly parallel algorithm in which many processor cores can be easily utilized. This is important since processor cores are progressively becoming less expensive and thus more accessible. The most obvious advantage of the multipath approach is in employing independent random-walk paths to produce an uncorrelated simulation output with a normal distribution allowing for straightforward and rigorous statistical analysis.

  19. Multipath diffusion: A general numerical model

    NASA Astrophysics Data System (ADS)

    Lee, J. K. W.; Aldama, A. A.

    1992-06-01

    The effect of high-diffusivity pathways on bulk diffusion of a solute in a material has been modeled previously for simple geometries such as those in tracer diffusion experiments, but not for the geometries and boundary conditions appropriate for experiments involving bulk exchange. Using a coupled system of equations for simultaneous diffusion of a solute through two families of diffusion pathways with differing diffusivities, a general 1-D finite difference model written in FORTRAN has been developed which can be used to examine the effect of high-diffusivity paths on partial and total concentration profiles within a homogeneous isotropic sphere, infinite cylinder, and infinite slab. The partial differential equations are discretized using the θ-method/central-difference scheme, and an iterative procedure analogous to the Gauss-Seidel method is employed to solve the two systems of coupled equations. Using Fourier convergence analysis, the procedure is shown to be unconditionally convergent. Computer simulations demonstrate that a multipath diffusion mechanism can enhance significantly the bulk diffusivity of a diffusing solute species through a material. The amount of solute escaping from a material is dependent strongly on the exchange coefficients, which govern the transfer of solute from the crystal lattice to the high-diffusivity paths and vice versa. In addition, the exchange coefficients ( ϰ1, and ϰ2) seem to control not only the amount of solute that is lost, but also the shape of the concentration profile. If | K1| < | K2|, concentration profiles generally are non-Fickian in shape, typically having shallow concentration gradients near the center (radius r = 0) and steep gradients towards the outer boundary of the material ( r = R). When | K1| ⩾ | K2| a concentration profile is generated which resembles a Fickian (volume) diffusion profile with an apparent bulk diffusivity between that of the crystal lattice and that of the high-diffusivity pathways

  20. A geometry-free and ionosphere-free multipath mitigation method for BDS three-frequency ambiguity resolution

    NASA Astrophysics Data System (ADS)

    Chen, Dezhong; Ye, Shirong; Xia, Jingchao; Liu, Yanyan; Xia, Pengfei

    2016-08-01

    Because of the unknown systematic errors and special satellite constellations in the Beidou system (BDS), it is difficult to quickly and reliably determine the ambiguity over long-range baselines in continuously operating reference station (CORS) network. This study seeks to improve the effectiveness and reliability of BDS ambiguity resolution (AR) by combining the geometry-free and ionosphere-free (GFIF) combination and multipath mitigation algorithm. The GFIF combination composed with three-frequency signals is free of distance-dependent errors and can be used to determine the narrow lane ambiguity. The presence of multipath errors means that not all ambiguities can be correctly achieved by rounding the averaged GFIF ambiguity series. A multipath model of the single-differenced (SD) GFIF combination from the previous period is established for each individual satellite. This model is subtracted from the SD GFIF combination for the current day to remove the effects of multipath errors. Using three triangle networks with lengths of approximately 120, 80 and 50 km, we demonstrate that the proposed method improves the AR performance. The ambiguity averaged first fixing time is typically less than 1801 s for inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites and less than 2007 s for the ˜ 42° elevation geostationary earth orbit (GEO) C02 satellite. However, it is more time consuming for the low-elevation GEO satellites C04 (˜ 18°) and C05 (˜ 28°). Kalman filtering is used to estimate the troposphere delays and two unfixed ambiguities by employing the ionosphere-free observations of all ambiguity-fixed/unfixed satellites. The experimental results show that only tens of seconds are required for AR in around 90 km baselines.

  1. Multipath exploitation in through-wall radar imaging via point spread functions.

    PubMed

    Setlur, Pawan; Alli, Giovanni; Nuzzo, Luigia

    2013-12-01

    Due to several sources of multipath in through-wall radar sensing, such as walls, floors, and ceilings, there could exist multipath ghosts associated with a few genuine targets in the synthetic aperture beamformed image. The multipath ghosts are false positives and therefore confusable with genuine targets. Here, we develop a multipath exploitation technique using point spread functions, which associate and map back the multipath ghosts to their genuine targets, thereby increasing the effective signal-to-clutter ratio (SCR) at the genuine target locations. To do so, we first develop a multipath model advocating the Householder transformation, which permits modeling multiple reflections at multiple walls, and also allows for unconventional room/building geometries. Second, closed-form solutions of the multipath ghost locations assuming free space propagation are derived. Third, a nonlinear least squares optimization is formulated and initialized with these free space solutions to localize the multipath ghosts in through-wall radar sensing. The exploitation approach is general and does not require a priori assumptions on the number of targets. The free space multipath ghost locations and exploitation technique derived here may be used as is for multipath exploitation in urban canyons via synthetic aperture radar. Analytical expressions quantifying the SCR gain after multipath exploitation are derived. The analysis is validated with experimental EM results using finite-difference time-domain simulations.

  2. Simulation of an automatically-controlled STOL aircraft in a microwave landing system multipath environment

    NASA Technical Reports Server (NTRS)

    Toda, M.; Brown, S. C.; Burrous, C. N.

    1976-01-01

    The simulated response is described of a STOL aircraft to Microwave Landing System (MLS) multipath errors during final approach and touchdown. The MLS azimuth, elevation, and DME multipath errors were computed for a relatively severe multipath environment at Crissy Field California, utilizing an MLS multipath simulation at MIT Lincoln Laboratory. A NASA/Ames six-degree-of-freedom simulation of an automatically-controlled deHavilland C-8A STOL aircraft was used to determine the response to these errors. The results show that the aircraft response to all of the Crissy Field MLS multipath errors was small. The small MLS azimuth and elevation multipath errors did not result in any discernible aircraft motion, and the aircraft response to the relatively large (200-ft (61-m) peak) DME multipath was noticeable but small.

  3. Effects and mitigation of multipath on GPS/Galileo

    NASA Astrophysics Data System (ADS)

    Zhao, Yi; Wang, Qing; Pan, Shuguo; He, Jun

    2007-11-01

    A conventional method to mitigate multipath errors in GNSS receivers is the strobe correlator, which achieves discriminator function shaping by combining two different narrow-correlator discriminators [1] [2]. The method performs a good performance when the difference in delays of direct and reflected signal is biggish in GPS scenario. Nevertheless, the performance of the method is not so good for Galileo scenario. The advent of the European navigation system Galileo has made it an exigent requirement to develop the receiver that can track Galileo signals as well as GPS signals. So, a better way should be groped for to mitigate both GPS and Galileo multipath errors. In the paper, a novel multipath mitigation scheme, named Early-Late Strobe Correlator (ELSC), was presented for both GPS and Galileo signals. By the Matlab simulation to the method, multipath errors could be mitigated effectively by using ELSC, especially to Galileo signals. The experiment results show that more excellent performances can be obtained by adopting ELSC presented in the paper with respected to the strobe correlator, although this will result in a more complex structure of discriminators.

  4. Utilizing space frequency COFDM on multipath fading channels

    NASA Astrophysics Data System (ADS)

    Kellerman, Fred C.

    2007-04-01

    This paper will investigate the use of an enhanced rate one Alamouti Space Frequency (SF) multiple antenna Orthogonal Frequency Division Multiplex (OFDM) radio communication system. A two transmit, single receive antenna system will be simulated to operate under conditions of multipath fading with noise. A simple modification to the standard coherent Alamouti receive combiner will be applied and shown to improve bit error rate (BER) performance on rapidly fading multipath HF channels. Orthogonal Frequency Division Multiplexing frequency domain techniques will be utilized to effectively eliminate the Inter-Symbol Interference (ISI) resulting from the effects of multipath. Numerically simulated results will be shown for several multipath fading High Frequency (HF) radio channels. Inner convolutional error correction coding will be applied in addition to the Alamouti coding and numerically simulated BER results presented. Various HF channel conditions will be simulated including the 2 ms, 10 Hz, 2 ms, 5 Hz, CCIR poor (2 ms, 1 Hz) and extra poor (2 ms, 2 Hz) channel conditions. Performance under conditions of correlated transmit antennas will also be investigated.

  5. Communication performance over the TDRS multipath/interference channel

    NASA Technical Reports Server (NTRS)

    Jenny, J.; Gaushell, D.; Shaft, P.

    1971-01-01

    Previously developed models are used to predict communication system performance for two cases: and aircraft/TDRS and a weather satellite/TDRS relay. The magnitude of multipath, differential time delay, Doppler shift, time and Doppler spread, and interference expected to be encountered are reviewed and applied to the two cases of interest.

  6. Ultrasonic imaging of material flaws exploiting multipath information

    NASA Astrophysics Data System (ADS)

    Shen, Xizhong; Zhang, Yimin D.; Demirli, Ramazan; Amin, Moeness G.

    2011-05-01

    In this paper, we consider ultrasonic imaging for the visualization of flaws in a material. Ultrasonic imaging is a powerful nondestructive testing (NDT) tool which assesses material conditions via the detection, localization, and classification of flaws inside a structure. Multipath exploitations provide extended virtual array apertures and, in turn, enhance imaging capability beyond the limitation of traditional multisensor approaches. We utilize reflections of ultrasonic signals which occur when encountering different media and interior discontinuities. The waveforms observed at the physical as well as virtual sensors yield additional measurements corresponding to different aspect angles. Exploitation of multipath information addresses unique issues observed in ultrasonic imaging. (1) Utilization of physical and virtual sensors significantly extends the array aperture for image enhancement. (2) Multipath signals extend the angle of view of the narrow beamwidth of the ultrasound transducers, allowing improved visibility and array design flexibility. (3) Ultrasonic signals experience difficulty in penetrating a flaw, thus the aspect angle of the observation is limited unless access to other sides is available. The significant extension of the aperture makes it possible to yield flaw observation from multiple aspect angles. We show that data fusion of physical and virtual sensor data significantly improves the detection and localization performance. The effectiveness of the proposed multipath exploitation approach is demonstrated through experimental studies.

  7. Mitigating Multipath Bias Using a Dual-Polarization Antenna: Theoretical Performance, Algorithm Design, and Simulation.

    PubMed

    Xie, Lin; Cui, Xiaowei; Zhao, Sihao; Lu, Mingquan

    2017-02-13

    It is well known that multipath effect remains a dominant error source that affects the positioning accuracy of Global Navigation Satellite System (GNSS) receivers. Significant efforts have been made by researchers and receiver manufacturers to mitigate multipath error in the past decades. Recently, a multipath mitigation technique using dual-polarization antennas has become a research hotspot for it provides another degree of freedom to distinguish the line-of-sight (LOS) signal from the LOS and multipath composite signal without extensively increasing the complexity of the receiver. Numbers of multipath mitigation techniques using dual-polarization antennas have been proposed and all of them report performance improvement over the single-polarization methods. However, due to the unpredictability of multipath, multipath mitigation techniques based on dual-polarization are not always effective while few studies discuss the condition under which the multipath mitigation using a dual-polarization antenna can outperform that using a single-polarization antenna, which is a fundamental question for dual-polarization multipath mitigation (DPMM) and the design of multipath mitigation algorithms. In this paper we analyze the characteristics of the signal received by a dual-polarization antenna and use the maximum likelihood estimation (MLE) to assess the theoretical performance of DPMM in different received signal cases. Based on the assessment we answer this fundamental question and find the dual-polarization antenna's capability in mitigating short delay multipath-the most challenging one among all types of multipath for the majority of the multipath mitigation techniques. Considering these effective conditions, we propose a dual-polarization sequential iterative maximum likelihood estimation (DP-SIMLE) algorithm for DPMM. The simulation results verify our theory and show superior performance of the proposed DP-SIMLE algorithm over the traditional one using only an RHCP

  8. Long GPS coordinate time series: multipath and geometry effects

    NASA Astrophysics Data System (ADS)

    King, M. A.; Watson, C. S.

    2009-04-01

    Within analyses of Global Positioning System (GPS) observations, unmodelled sub-daily signals are known to propagate into long-period signals via a number of different mechanisms. In this paper, we investigate the effects of time-variable satellite geometry and the propagation of an unmodelled multipath signal that is analogous to a change in the elevation dependant phase centre of the receiving antenna. Multipath reflectors at H=0.1 m, 0.2 m and 1.5 m below the antenna are modeled and their effects on GPS coordinate time series are examined. Simulated time series at 20 global IGS sites for 2000-2008 were derived using the satellite geometry as defined by daily broadcast orbits, in addition to that defined using a perfectly repeating synthetic orbit. For the simulations generated using the broadcast orbits with a perfectly clear horizon, we observe the introduction of a time variable bias in the time series of up to several centimeters. Considerable site to site variability of the frequency and magnitude of the signal is observed, in addition to variation as a function of multipath source. When adopting realistic GPS observation geometries obtained from real data (e.g., those that include the effects of tracking outages, local obstructions, etc.), we observe concerning levels of temporal coordinate variation in the presence of the multipath signals. In these cases, we observe spurious signals across the frequency domain, in addition to what appears as offsets and secular trends. Velocity biases of more than 1mm/yr are evident at some few sites. The propagated signal in the vertical component is consistent with a noise model with a spectral index marginally above flicker noise (mean index -1.4), with some sites exhibiting power law magnitudes at comparable levels to actual height time series generated in GIPSY. The propagated signal also shows clear spectral peaks across all coordinate components at harmonics of the draconitic year for a GPS satellite (351.4 days

  9. Long GPS coordinate time series: multipath and geometry effects

    NASA Astrophysics Data System (ADS)

    King, M.; Watson, C. S.

    2009-12-01

    Within analyses of Global Positioning System (GPS) observations, unmodelled sub-daily signals are known to propagate into long-period signals via a number of different mechanisms. We report on the effects of time-variable satellite geometry and the propagation of an unmodelled multipath signal. Multipath reflectors at H=0.1 m, 0.2 m and 1.5 m below the antenna are modeled and their effects on GPS coordinate time series are examined. Simulated time series at 20 global IGS sites for 2000-2008 were derived using the satellite geometry as defined by daily broadcast orbits, in addition to that defined using a perfectly repeating synthetic orbit. For the simulations generated using the broadcast orbits with a perfectly clear horizon, we observe the introduction of a time variable bias in the time series of up to several centimeters. Considerable site to site variability of the frequency and magnitude of the signal is observed, in addition to variation as a function of multipath source. When adopting realistic GPS observation geometries obtained from real data (e.g., those that include the effects of tracking outages, local obstructions, etc.), we observe concerning levels of temporal coordinate variation in the presence of the multipath signals. In these cases, we observe spurious signals across the frequency domain, in addition to what appears as offsets and secular trends. Velocity biases of more than 1mm/yr are evident at some few sites. The propagated signal in the vertical component is consistent with a noise model with a spectral index marginally above flicker noise (mean index -1.4), with some sites exhibiting power law magnitudes at comparable levels to actual height time series generated in GIPSY. The propagated signal also shows clear spectral peaks across all coordinate components at harmonics of the draconitic year for a GPS satellite (351.2 days). When a perfectly repeating synthetic GPS constellation is used, the simulations show near-negligible power law

  10. An Investigation of Multipath Effects on the GPS System During Auto-Rendezvous and Capture

    NASA Technical Reports Server (NTRS)

    Richie, James E.; Forest, Francis W.

    1995-01-01

    The proposed use of a Cargo Transport Vehicle (CTV) to carry hardware to the Space Station Freedom (SSF) during the construction phase of the SSF project requires remote maneuvering of the CTV. The CTV is not a manned vehicle. Obtaining the relative positions of the CTV and SSF for remote auto-rendezvous and capture (AR&C) scenarios will rely heavily on the Global Positioning System (GPS). The GPS system is expected to guide the CTV up to a distance of 100 to 300 meters from the SSF. At some point within this range, an optical docking system will take over the remote guidance for capture. During any remote guidance by GPS it is possible that significant multipath signals may be caused by large objects in the vicinity of the module being remotely guided. This could alter the position obtained by the GPS system from the actual position. Due to the nature of the GPS signals, it has been estimated that if the difference in distance between the Line of Sight (LOS) path and the multipath is greater than 300 meters, the GPS system is capable of discriminating between the direct signal and the reflected (or multipath) signal. However, if the path difference is less than 300 meters, one must be concerned. This report details the work accomplished by the Electromagnetic Simulations Laboratory at Marquette University over the period December 1993 to May 1995. This work is an investigation of the strength and phase of a multipath signal arriving at the CTV relative to the direct or line of sight (LOS) signal. The signal originates at a GPS satellite in half geo-stationary orbit and takes two paths to the CTV: (1) the direct or LOS path from the GPS satellite to the CTV; and (2) a scattered path from the GPS satellite to the SSF module and then to the CTV. The scattering from a cylinder has been computed using the physical optics approximation for the current. No other approximations or assumptions have been made including no assumptions regarding the far field or Fresnel field

  11. Modeling and characterization of multipath in global navigation satellite system ranging signals

    NASA Astrophysics Data System (ADS)

    Weiss, Jan Peter

    The Global Positioning System (GPS) provides position, velocity, and time information to users in anywhere near the earth in real-time and regardless of weather conditions. Since the system became operational, improvements in many areas have reduced systematic errors affecting GPS measurements such that multipath, defined as any signal taking a path other than the direct, has become a significant, if not dominant, error source for many applications. This dissertation utilizes several approaches to characterize and model multipath errors in GPS measurements. Multipath errors in GPS ranging signals are characterized for several receiver systems and environments. Experimental P(Y) code multipath data are analyzed for ground stations with multipath levels ranging from minimal to severe, a C-12 turboprop, an F-18 jet, and an aircraft carrier. Comparisons between receivers utilizing single patch antennas and multi-element arrays are also made. In general, the results show significant reductions in multipath with antenna array processing, although large errors can occur even with this kind of equipment. Analysis of airborne platform multipath shows that the errors tend to be small in magnitude because the size of the aircraft limits the geometric delay of multipath signals, and high in frequency because aircraft dynamics cause rapid variations in geometric delay. A comprehensive multipath model is developed and validated. The model integrates 3D structure models, satellite ephemerides, electromagnetic ray-tracing algorithms, and detailed antenna and receiver models to predict multipath errors. Validation is performed by comparing experimental and simulated multipath via overall error statistics, per satellite time histories, and frequency content analysis. The validation environments include two urban buildings, an F-18, an aircraft carrier, and a rural area where terrain multipath dominates. The validated models are used to identify multipath sources, characterize signal

  12. Performance optimization of partially coherent CPM on multipath fading channel

    NASA Astrophysics Data System (ADS)

    Norris, James A.

    2012-05-01

    Constant Envelope, Continuous Phase Modulation (CPM) is highly desirable for low-power, battery-operated systems as well as for small-profile vehicular and aircraft systems where large amplifiers won't fit. In the past, CPM was noted for increased demodulator complexity (over simple PSK or FSK receivers) but with modern computational power it is possible to continue to improve the power efficiency of CPM modulation at the receiver. In the specific case of multipath, there are several known methods (Rake Receiver is one example) to resolve and correct for inter-symbol interference and phase distortion. This paper develops a standard CPM demodulation and compares the optimal coherent performance with a partially coherent receiver. Several methods are developed to compensate and correct for ISI due to various types of multipath and the power efficiency is compared to the original, coherent demodulation.

  13. Multipath propagation models for near line-of-sight conditions

    NASA Astrophysics Data System (ADS)

    Martens, Walter

    This thesis analyzes the behaviour of a multipath channel for suburban and semi-rural areas in which line of sight (LOS) or near LOS exists between the transmitter and receiver. The thesis is divided into five major parts: a background and literature survey, a theoretical analysis, experimental measurements which validate the analysis, applications to practical communication channels and a study of the effects of such a channel on typical signal waveforms. It is found that the channel is either good or very bad. The latter usually occurs close to buildings where a single dominant reflection with a relative delay of less than a microsecond produces a periodic severe fading and distortion of the signal, often making a link unusable. A methodology is also outlined for determining which locations in a defined area will show the behaviour associated with a bad channel. Key words: Digital communication, propagation, multipath

  14. Chip Discrimination for UWB Impulse Radio Networks in Multipath Channels

    DTIC Science & Technology

    2005-08-01

    IEEE, 92(2):295 – 311, Feb. 2004. [8] J. R. Foerster, M. Pendergrass, A. F. Molisch . A Channel Model for Ultrawideband Indoor Communication...Multipath Channels. In Proc. IRE, volume 46, pages 555 – 570, March 1958. [24] D. Cassioli, M. Z. Win, F. Vatalaro, A. F. Molisch . Performance of Low...M. Z. Win, F. Vatalaro, A. F. Molisch . Effects of Spreading Bandwidth on the Performance of UWB RAKE Receivers. IEEE International Conference on

  15. Multipath Effects on Phase Measurements with Continuous Terahertz Waves

    NASA Astrophysics Data System (ADS)

    Cordes, A. H.; Albarracin, M. G.; Thomas, D. H.; von der Weid, J. P.

    2016-05-01

    We evaluate the effect of multipath waves on terahertz phase measurements due to multiple reflections between the transmitter antenna and the sample. We show that the phase shift introduced by the sample will be biased by a value which depends on the sample position in the terahertz path. We show how to remove the bias and use the technique in the measurement of the index of refraction of Mylar at 194.4 GHz.

  16. Performance of adaptive matched filter receivers over fading multipath channels

    NASA Astrophysics Data System (ADS)

    Pahlavan, Kaveh; Matthews, James W.

    1990-12-01

    A unified discrete channel model from the information source up to the sampler was developed for fading multipath channels. Different methods for adaptive channel measurement are studied. The performance of a discrete matched filter using different adaptation techniques and working over a troposcatter channel is predicted. It is shown that the effects of channel measurement noise are less damaging for the decision-directed adaptation technique as compared to any kind of reference-directed adaptation.

  17. A review of atmospheric multipath measurements and digital system performance

    NASA Astrophysics Data System (ADS)

    Hubbard, R. W.

    1984-10-01

    The effects of multipath propagation on digital communication systems are discussed. Recent literature and experiments are reviewed for information that either describes or defines the phenomenon in terms of the propagation media itself. A morphology is presented which is intended to produce better understanding and improved performance of digital radio systems. The technical posture for the digital troposcatter channel up to the 1980s is summarized.

  18. Measurements and predictions of multipath dispersion for troposcatter links

    NASA Astrophysics Data System (ADS)

    Larsen, R.

    1984-10-01

    Multipath dispersion measurements made on several 4.5 GHz paths in the United Kingdom are presented. Beamwidth and scatter angle dependence and several features of dispersion in angle and space diversity are discussed. These measurements and other from the literature are compared with predictions of dispersion. The predictions considerably underestimated the measured dispersion, but the inclusion of a beam broadening factor in the calculations gave a significant improvement in accuracy.

  19. UWB Radio Link Modeling for Multipath Environment

    NASA Astrophysics Data System (ADS)

    Uguen, B.; Talom, F. T.; Chassay, G.

    Ultra-wideband (UWB) systems have the potential to provide very high data rates over short distances. This paper details the construction of the received signal from a pulse waveform on the transmission line at the transmitter to the received signal at the receiver allowing a fine analysis of antennas impact on UWB systems. This is used for deterministic modeling based on ray tracing (RT) and geometrical optics (GO). The paper presents the way of sizing the pulse amplitude in order to satisfy a given power spectral density (PSD) mask for a given modulation. The proposed approach is demonstrated to be coherent with classical power link budget.

  20. Chaos-based wireless communication resisting multipath effects

    NASA Astrophysics Data System (ADS)

    Yao, Jun-Liang; Li, Chen; Ren, Hai-Peng; Grebogi, Celso

    2017-09-01

    In additive white Gaussian noise channel, chaos has been shown to be the optimal coherent communication waveform in the sense of using a very simple matched filter to maximize the signal-to-noise ratio. Recently, Lyapunov exponent spectrum of the chaotic signals after being transmitted through a wireless channel has been shown to be unaltered, paving the way for wireless communication using chaos. In wireless communication systems, inter-symbol interference caused by multipath propagation is one of the main obstacles to achieve high bit transmission rate and low bit-error rate (BER). How to resist the multipath effect is a fundamental problem in a chaos-based wireless communication system (CWCS). In this paper, a CWCS is built to transmit chaotic signals generated by a hybrid dynamical system and then to filter the received signals by using the corresponding matched filter to decrease the noise effect and to detect the binary information. We find that the multipath effect can be effectively resisted by regrouping the return map of the received signal and by setting the corresponding threshold based on the available information. We show that the optimal threshold is a function of the channel parameters and of the information symbols. Practically, the channel parameters are time-variant, and the future information symbols are unavailable. In this case, a suboptimal threshold is proposed, and the BER using the suboptimal threshold is derived analytically. Simulation results show that the CWCS achieves a remarkable competitive performance even under inaccurate channel parameters.

  1. Wide-band packet radio for multipath environments

    NASA Astrophysics Data System (ADS)

    Fischer, Jeffrey H.; Cafarella, John H.; Bouman, Charles A.; Flynn, Gerard T.; Dolat, Victor S.

    1988-05-01

    A direct-sequence spread-spectrum packet radio is described that has versatile signal-processing and local-control capabilities designed to support the functions required of a robust mobile communications network. Noteworthy capabilities include eleven selectable data rates with accurate range measurements in a fading multipath channel. The radio uses a hybrid analog/digital signal processor and nonrepeating spreading codes for suppression of intersymbol interference and jamming. It incorporates two sets of monolithic surface-acoustic-wave convolvers as programmable matched filters with time-bandwidth products of 64 and 2000. The analog matched filters are coupled with binary postprocessing for the functions of detection, RAKE demodulation, and ranging measurements over a wide multipath spread. The data rate can be varied in response to channel conditions from 1.45 Mb/s down to 44 b/s with an almost ideal tradeoff in signal-processing gain from 18 dB up to 61 dB prior to multipath combining.

  2. Computing Path Tables for Quickest Multipaths In Computer Networks

    SciTech Connect

    Grimmell, W.C.

    2004-12-21

    We consider the transmission of a message from a source node to a terminal node in a network with n nodes and m links where the message is divided into parts and each part is transmitted over a different path in a set of paths from the source node to the terminal node. Here each link is characterized by a bandwidth and delay. The set of paths together with their transmission rates used for the message is referred to as a multipath. We present two algorithms that produce a minimum-end-to-end message delay multipath path table that, for every message length, specifies a multipath that will achieve the minimum end-to-end delay. The algorithms also generate a function that maps the minimum end-to-end message delay to the message length. The time complexities of the algorithms are O(n{sup 2}((n{sup 2}/logn) + m)min(D{sub max}, C{sub max})) and O(nm(C{sub max} + nmin(D{sub max}, C{sub max}))) when the link delays and bandwidths are non-negative integers. Here D{sub max} and C{sub max} are respectively the maximum link delay and maximum link bandwidth and C{sub max} and D{sub max} are greater than zero.

  3. A Multipath Calculation of Surface-Generated Underwater Acoustic Ambient Vertical Directivity

    DTIC Science & Technology

    1988-11-18

    nth Eigenray I Homogeneous Source Intensity Density g( Source Directivity dA = r dr dO 0 Azimuthal Position of Source Relative to Receiver * 2...Directional-Frequency Spectra - Multipath Expansion ( Eigenray ) Approach 5 TD 8431 SLIDE 3 Although the calculations were done with a specific location in...Frequency Spectra - Multipath Expansion ( Eigenray ) Approach 0 0 13 0 TD 8431 Multipath Calculation of the Acoustic Vertical Directional Spectra RESULTS e

  4. Precise GPS Signal Tracking in Interference and Multipath Environment Using a Multi-Channel Software Receiver

    DTIC Science & Technology

    2010-11-30

    sight signals (DLOS) is very short. This form of multipath is difficult to detect and mitigate using traditional correlator -based methods. Our approach...direct line of sight signals (DLOS) is very short. This form of multipath is difficult to detect and mitigate using traditional correlator -based...Multipath reflector 0 m d MP Detection ANOVA Hypothesis Test DLOS & MP AOA Estimation Contractive Map & Alternating Projection Correlators 0

  5. Mitigating Multipath Bias Using a Dual-Polarization Antenna: Theoretical Performance, Algorithm Design, and Simulation

    PubMed Central

    Xie, Lin; Cui, Xiaowei; Zhao, Sihao; Lu, Mingquan

    2017-01-01

    It is well known that multipath effect remains a dominant error source that affects the positioning accuracy of Global Navigation Satellite System (GNSS) receivers. Significant efforts have been made by researchers and receiver manufacturers to mitigate multipath error in the past decades. Recently, a multipath mitigation technique using dual-polarization antennas has become a research hotspot for it provides another degree of freedom to distinguish the line-of-sight (LOS) signal from the LOS and multipath composite signal without extensively increasing the complexity of the receiver. Numbers of multipath mitigation techniques using dual-polarization antennas have been proposed and all of them report performance improvement over the single-polarization methods. However, due to the unpredictability of multipath, multipath mitigation techniques based on dual-polarization are not always effective while few studies discuss the condition under which the multipath mitigation using a dual-polarization antenna can outperform that using a single-polarization antenna, which is a fundamental question for dual-polarization multipath mitigation (DPMM) and the design of multipath mitigation algorithms. In this paper we analyze the characteristics of the signal received by a dual-polarization antenna and use the maximum likelihood estimation (MLE) to assess the theoretical performance of DPMM in different received signal cases. Based on the assessment we answer this fundamental question and find the dual-polarization antenna’s capability in mitigating short delay multipath—the most challenging one among all types of multipath for the majority of the multipath mitigation techniques. Considering these effective conditions, we propose a dual-polarization sequential iterative maximum likelihood estimation (DP-SIMLE) algorithm for DPMM. The simulation results verify our theory and show superior performance of the proposed DP-SIMLE algorithm over the traditional one using only an

  6. Multipath exploited Bayesian and Cramér-Rao bounds for single-sensor target localization

    NASA Astrophysics Data System (ADS)

    Setlur, Pawan; Devroye, Natasha

    2013-12-01

    In urban scenarios, radar returns consist of a direct path return along with multipath returns from signal reflections off surfaces such as building walls or floors. When multipath is resolvable, and given the knowledge of the geometry of the reflecting surfaces, it has recently been demonstrated that multipath returns create additional "virtual" radar sensors, thereby permitting target localization with a single radar sensor. The goal of this article is to determine theoretical variance lower bounds on how well a single-sensor system is able to localize a target in the presence of exploitable multipath and discuss several practical issues that arise in this context, including the multipath association problem, clutter, and the impact of wall roughness. Exploiting multipath, rather than viewing it strictly as a hindrance, is an emerging topic in the radar community whose potential is not yet fully understood. Towards this goal, we first derive the Cramér-Rao and the Bayesian Cramér-Rao bounds on target localization using a single-sensor which exploits resolvable multipath. For a wide class of radar-target geometries, functions termed multipath preservers are derived which indicate when multipath is physically observable in the radar returns; these functions assist in evaluating the potential of multipath exploitation in urban sensing. Given a reflecting geometry, the obtained lower bounds allow the radar operator to anticipate blind spots, place confidence levels on the localization results, and permit sensor positioning to optimally aid in exploiting multipath for target localization. It is shown that variance bounds on the location parameters improve with richer resolvable multipath generating mechanisms.

  7. Characteristics of the BDS Carrier Phase Multipath and Its Mitigation Methods in Relative Positioning

    PubMed Central

    Dai, Wujiao; Shi, Qiang; Cai, Changsheng

    2017-01-01

    The carrier phase multipath effect is one of the most significant error sources in the precise positioning of BeiDou Navigation Satellite System (BDS). We analyzed the characteristics of BDS multipath, and found the multipath errors of geostationary earth orbit (GEO) satellite signals are systematic, whereas those of inclined geosynchronous orbit (IGSO) or medium earth orbit (MEO) satellites are both systematic and random. The modified multipath mitigation methods, including sidereal filtering algorithm and multipath hemispherical map (MHM) model, were used to improve BDS dynamic deformation monitoring. The results indicate that the sidereal filtering methods can reduce the root mean square (RMS) of positioning errors in the east, north and vertical coordinate directions by 15%, 37%, 25% and 18%, 51%, 27% in the coordinate and observation domains, respectively. By contrast, the MHM method can reduce the RMS by 22%, 52% and 27% on average. In addition, the BDS multipath errors in static baseline solutions are a few centimeters in multipath-rich environments, which is different from that of Global Positioning System (GPS) multipath. Therefore, we add a parameter representing the GEO multipath error in observation equation to the adjustment model to improve the precision of BDS static baseline solutions. And the results show that the modified model can achieve an average precision improvement of 82%, 54% and 68% in the east, north and up coordinate directions, respectively. PMID:28387744

  8. Isolating the multipath component in GNSS signal-to-noise data and locating reflecting objects

    NASA Astrophysics Data System (ADS)

    Benton, C. J.; Mitchell, C. N.

    2011-12-01

    A filter to separate the effect of multipath in Global Navigation Satellite System (GNSS) signal-to-noise ratio (SNR) data is presented. The filter removes multipath cleanly, and affects neither slowly varying trends (such as tropospheric absorption or variation in satellite range) nor high frequency components (such as ionospheric scintillation), and so is potentially useful in space-weather research. Similarly, the multipath data removed from the input data is minimally distorted, and contains useful information as to the multipath geometry. A method to locate reflecting objects using a form of spectral analysis is described.

  9. Characteristics of the BDS Carrier Phase Multipath and Its Mitigation Methods in Relative Positioning.

    PubMed

    Dai, Wujiao; Shi, Qiang; Cai, Changsheng

    2017-04-07

    The carrier phase multipath effect is one of the most significant error sources in the precise positioning of BeiDou Navigation Satellite System (BDS). We analyzed the characteristics of BDS multipath, and found the multipath errors of geostationary earth orbit (GEO) satellite signals are systematic, whereas those of inclined geosynchronous orbit (IGSO) or medium earth orbit (MEO) satellites are both systematic and random. The modified multipath mitigation methods, including sidereal filtering algorithm and multipath hemispherical map (MHM) model, were used to improve BDS dynamic deformation monitoring. The results indicate that the sidereal filtering methods can reduce the root mean square (RMS) of positioning errors in the east, north and vertical coordinate directions by 15%, 37%, 25% and 18%, 51%, 27% in the coordinate and observation domains, respectively. By contrast, the MHM method can reduce the RMS by 22%, 52% and 27% on average. In addition, the BDS multipath errors in static baseline solutions are a few centimeters in multipath-rich environments, which is different from that of Global Positioning System (GPS) multipath. Therefore, we add a parameter representing the GEO multipath error in observation equation to the adjustment model to improve the precision of BDS static baseline solutions. And the results show that the modified model can achieve an average precision improvement of 82%, 54% and 68% in the east, north and up coordinate directions, respectively.

  10. Evaluating Pseudorange Multipath at CGPS Stations Spanning Mexico

    NASA Astrophysics Data System (ADS)

    Vazquez, G.; Bennett, R. A.; Spinler, J. C.

    2013-12-01

    A research study was conducted in order to quantify and analyze the amount of pseudorange multipath at continuous Global Positioning System (CGPS) stations spanning Mexico. These CGPS stations are administered by a variety of organizations, including government agencies and public universities, and thus serve a wide range of positioning needs. Despite the diversity of the networks and their intended audiences, a core function of all of the networks is to provide a stable framework for high-precision positioning in support of diverse commercial and scientific applications. CGPS data from a large number of publicly available networks located in Mexico were studied. These include the RGNA (National Active Geodetic Network) administered by INEGI (National Institute of Statistics and Geography), the PBO network (Plate Boundary Observatory) funded by the National Science Foundation (NSF) and operated by UNAVCO (University NAVstar Consortium), the Southern California Integrated GPS Network (SCIGN), which is a collaboration effort of the United States Geological Survey (USGS), Scripps Institution of Oceanography and the Jet Propulsion Laboratory (JPL), the UNAM network, operated by the National Seismological System (SSN) and the Institute of Geophysics of the National Autonomous University of Mexico (UNAM), the Suominet Geodetic Network (SNG) and the CORS (Continuously Operating Reference Station) network, operated by the Federal Aviation Administration (FAA). A total of 54 CGPS stations were evaluated, where dual-frequency geodetic-grade receivers collected GPS data continuously during the period from 1994 to 2013. It is usually assumed that despite carefully selected locations, all CGPS stations are to some extent, affected by the presence of signal multipath. In addition, the geographic distribution of stations provides a nation-wide access to the International Terrestrial Reference Frame (ITRF). For real-time kinematic (RTK) and rapid static applications that depend on

  11. ILS Glide Slope Performance Prediction Multipath Scattering

    DTIC Science & Technology

    1976-12-01

    simple image theory to obtain the image field Ha(r): " .. e i k JA A ( 1 0 ) -H: a r) - - - 2- [ xe-(.h)e J where D2 is the distance from the image of...the transmitting dipole to the field point r: D2 x2 + (y-ya) + (z+h) The total field intensity H. at r is just the sum of the direct (Aa and ground...a _ [1+1 213+1 3 (14) where 11 F1 eik(R 1 +D1) ds (15) ,s. DZ-l KD Is(S - F 2 e ik(R I+ D2 ) ds (I ) 2 D, R1 6i 13 / I ik(R2+DI) SD1zR2 ds (17) 14

  12. LBMR: Load-Balanced Multipath Routing for Wireless Data-Intensive Transmission in Real-Time Medical Monitoring.

    PubMed

    Tseng, Chinyang Henry

    2016-05-31

    In wireless networks, low-power Zigbee is an excellent network solution for wireless medical monitoring systems. Medical monitoring generally involves transmission of a large amount of data and easily causes bottleneck problems. Although Zigbee's AODV mesh routing provides extensible multi-hop data transmission to extend network coverage, it originally does not, and needs to support some form of load balancing mechanism to avoid bottlenecks. To guarantee a more reliable multi-hop data transmission for life-critical medical applications, we have developed a multipath solution, called Load-Balanced Multipath Routing (LBMR) to replace Zigbee's routing mechanism. LBMR consists of three main parts: Layer Routing Construction (LRC), a Load Estimation Algorithm (LEA), and a Route Maintenance (RM) mechanism. LRC assigns nodes into different layers based on the node's distance to the medical data gateway. Nodes can have multiple next-hops delivering medical data toward the gateway. All neighboring layer-nodes exchange flow information containing current load, which is the used by the LEA to estimate future load of next-hops to the gateway. With LBMR, nodes can choose the neighbors with the least load as the next-hops and thus can achieve load balancing and avoid bottlenecks. Furthermore, RM can detect route failures in real-time and perform route redirection to ensure routing robustness. Since LRC and LEA prevent bottlenecks while RM ensures routing fault tolerance, LBMR provides a highly reliable routing service for medical monitoring. To evaluate these accomplishments, we compare LBMR with Zigbee's AODV and another multipath protocol, AOMDV. The simulation results demonstrate LBMR achieves better load balancing, less unreachable nodes, and better packet delivery ratio than either AODV or AOMDV.

  13. LBMR: Load-Balanced Multipath Routing for Wireless Data-Intensive Transmission in Real-Time Medical Monitoring

    PubMed Central

    Tseng, Chinyang Henry

    2016-01-01

    In wireless networks, low-power Zigbee is an excellent network solution for wireless medical monitoring systems. Medical monitoring generally involves transmission of a large amount of data and easily causes bottleneck problems. Although Zigbee’s AODV mesh routing provides extensible multi-hop data transmission to extend network coverage, it originally does not, and needs to support some form of load balancing mechanism to avoid bottlenecks. To guarantee a more reliable multi-hop data transmission for life-critical medical applications, we have developed a multipath solution, called Load-Balanced Multipath Routing (LBMR) to replace Zigbee’s routing mechanism. LBMR consists of three main parts: Layer Routing Construction (LRC), a Load Estimation Algorithm (LEA), and a Route Maintenance (RM) mechanism. LRC assigns nodes into different layers based on the node’s distance to the medical data gateway. Nodes can have multiple next-hops delivering medical data toward the gateway. All neighboring layer-nodes exchange flow information containing current load, which is the used by the LEA to estimate future load of next-hops to the gateway. With LBMR, nodes can choose the neighbors with the least load as the next-hops and thus can achieve load balancing and avoid bottlenecks. Furthermore, RM can detect route failures in real-time and perform route redirection to ensure routing robustness. Since LRC and LEA prevent bottlenecks while RM ensures routing fault tolerance, LBMR provides a highly reliable routing service for medical monitoring. To evaluate these accomplishments, we compare LBMR with Zigbee’s AODV and another multipath protocol, AOMDV. The simulation results demonstrate LBMR achieves better load balancing, less unreachable nodes, and better packet delivery ratio than either AODV or AOMDV. PMID:27258297

  14. New Time and Multipath Augmentations for the Global Positioning System

    NASA Astrophysics Data System (ADS)

    Pratt, John A.

    Although developed with a narrow focus in mind, use of GPS has expanded into dozens of fields in industry, science, and military applications. The purpose of the research detailed in this dissertation is an increase in the utility of GPS by improving primary applications of the constellation and expand the practicality of some secondary applications. The first portion of this disseration focuses on the development of clock estimation algorithms for a GPS aiding system called iGPS which has been designed to improve the performance of the system in challenging environments. Central to the functioning of iGPS are the Iridium communication satellites. This dissertation describes a Kalman filter for estimating Iridium satellite clock biases from GPS-like measurements at an interval of 10 s. Typical results show the current filter to be accurate to within 200 ns while always meeting the initial system specification of half a microsecond. The following chapter examines the expediency of increasing the number of terms used to represent the clock bias in the broadcast message and it is shown that the current broadcast message is sufficient. The second half of the dissertation deals with the use of GPS multipath as an environmental measurement. It is shown that reflections of GPS signals from the ground can be used to estimate several important phenological indicators relative to the vegetation surrounding the GPS antenna. Methods are developed for refining the reflected signal and preparing it for use as a vegetation index. Finally, the effect of temperature and multipath supression algorithms on the GPS multipath data is examined relative to its viability for use as previously described. It is shown that these effects are minor in the majority of the GPS sites used in this study and that the data can be adjusted to avoid temperature difficulties.

  15. In search of multipath interference using large molecules.

    PubMed

    Cotter, Joseph P; Brand, Christian; Knobloch, Christian; Lilach, Yigal; Cheshnovsky, Ori; Arndt, Markus

    2017-08-01

    The superposition principle is fundamental to the quantum description of both light and matter. Recently, a number of experiments have sought to directly test this principle using coherent light, single photons, and nuclear spin states. We extend these experiments to massive particles for the first time. We compare the interference patterns arising from a beam of large dye molecules diffracting at single, double, and triple slit material masks to place limits on any high-order, or multipath, contributions. We observe an upper bound of less than one particle in a hundred deviating from the expectations of quantum mechanics over a broad range of transverse momenta and de Broglie wavelength.

  16. Multipath effects in a Global Positioning Satellite system receiver

    NASA Technical Reports Server (NTRS)

    Mcdonald, Malcolm W.

    1992-01-01

    This study, as a part of a large continuing investigation being conducted by the Communications Systems Branch of the Information and Electronic Systems Laboratory at the Marshall Space Flight Center, was undertaken to explore the multipath response characteristics of a particular Global Positioning Satellite (GPS) receiver which was available in the laboratory at the beginning and throughout the entirety of the study, and to develop a suitable regime of experimental procedure which can be applied to other state-of-the-art GPS receivers in the larger investigation.

  17. Forward and Inverse Modeling of GPS Multipath for Snow Monitoring

    NASA Astrophysics Data System (ADS)

    Nievinski, Felipe Geremia

    Snowpacks provide reservoirs of freshwater, storing solid precipitation and delaying runoff to be released later in the spring and summer when it is most needed. The goal of this dissertation is to develop the technique of GPS multipath reflectometry (GPS-MR) for ground-based measurement of snow depth. The phenomenon of multipath in GPS constitutes the reception of reflected signals in conjunction with the direct signal from a satellite. As these coherent direct and reflected signals go in and out of phase, signal-to-noise ratio (SNR) exhibits peaks and troughs that can be related to land surface characteristics. In contrast to other GPS reflectometry modes, in GPS-MR the poorly separated composite signal is collected utilizing a single antenna and correlated against a single replica. SNR observations derived from the newer L2-frequency civilian GPS signal (L2C) are used, as recorded by commercial off-the-shelf receivers and geodetic-quality antennas in existing GPS sites. I developed a forward/inverse approach for modeling GPS multipath present in SNR observations. The model here is unique in that it capitalizes on known information about the antenna response and the physics of surface scattering to aid in retrieving the unknown snow conditions in the antenna surroundings. This physically-based forward model is utilized to simulate the surface and antenna coupling. The statistically-rigorous inverse model is considered in two parts. Part I (theory) explains how the snow characteristics are parameterized; the observation/parameter sensitivity; inversion errors; and parameter uncertainty, which serves to indicate the sensing footprint where the reflection originates. Part II (practice) applies the multipath model to SNR observations and validates the resulting GPS retrievals against independent in situ measurements during a 1-3 year period in three different environments---grasslands, alpine, and forested. The assessment yields a correlation of 0.98 and an RMS error

  18. Toward a multi-path approach for SETI

    NASA Astrophysics Data System (ADS)

    Papagiannis, Michael D.

    1989-11-01

    Conceptualizations of plausible SETI modes of communication have evolved in parallel with the whole range of communications technologies; it is accordingly suggested that a 'multipath' approach to SETI may constitute the most astute strategy. A major project illustrative of this approach is the 8 million-channel NASA Multi-Channel Spectrum-Analyzer (MCSA), currently under construction; while the 'Targeted Search' component of CMSA examines 800-1000 sun-like stars with very high sensitivity and spectral resolution in the 1.2-2.0 GHz, 'water hole', its 'Sky Survey' will search the sky over the entire, 1-10 GHz microwave window of the earth's atmosphere.

  19. Multi-path transportation futures study: Results from Phase 1

    SciTech Connect

    Patterson, Phil; Singh, Margaret; Plotkin, Steve; Moore, Jim

    2007-03-09

    This PowerPoint briefing provides documentation and details for Phase 1 of the Multi-Path Transportation Futures Study, which compares alternative ways to make significant reductions in oil use and carbon emissions from U.S. light vehicles to 2050. Phase I, completed in 2006, was a scoping study, aimed at identifying key analytic issues and constructing a study design. The Phase 1 analysis included an evaluation of several pathways and scenarios; however, these analyses were limited in number and scope and were designed to be preliminary.

  20. In search of multipath interference using large molecules

    PubMed Central

    Cotter, Joseph P.; Brand, Christian; Knobloch, Christian; Lilach, Yigal; Cheshnovsky, Ori; Arndt, Markus

    2017-01-01

    The superposition principle is fundamental to the quantum description of both light and matter. Recently, a number of experiments have sought to directly test this principle using coherent light, single photons, and nuclear spin states. We extend these experiments to massive particles for the first time. We compare the interference patterns arising from a beam of large dye molecules diffracting at single, double, and triple slit material masks to place limits on any high-order, or multipath, contributions. We observe an upper bound of less than one particle in a hundred deviating from the expectations of quantum mechanics over a broad range of transverse momenta and de Broglie wavelength. PMID:28819641

  1. Multipath estimation in urban environments from joint GNSS receivers and LiDAR sensors.

    PubMed

    Ali, Khurram; Chen, Xin; Dovis, Fabio; De Castro, David; Fernández, Antonio J

    2012-10-30

    In this paper, multipath error on Global Navigation Satellite System (GNSS) signals in urban environments is characterized with the help of Light Detection and Ranging (LiDAR) measurements. For this purpose, LiDAR equipment and Global Positioning System (GPS) receiver implementing a multipath estimating architecture were used to collect data in an urban environment. This paper demonstrates how GPS and LiDAR measurements can be jointly used to model the environment and obtain robust receivers. Multipath amplitude and delay are estimated by means of LiDAR feature extraction and multipath mitigation architecture. The results show the feasibility of integrating the information provided by LiDAR sensors and GNSS receivers for multipath mitigation.

  2. Multipath Estimation in Urban Environments from Joint GNSS Receivers and LiDAR Sensors

    PubMed Central

    Ali, Khurram; Chen, Xin; Dovis, Fabio; De Castro, David; Fernández, Antonio J.

    2012-01-01

    In this paper, multipath error on Global Navigation Satellite System (GNSS) signals in urban environments is characterized with the help of Light Detection and Ranging (LiDAR) measurements. For this purpose, LiDAR equipment and Global Positioning System (GPS) receiver implementing a multipath estimating architecture were used to collect data in an urban environment. This paper demonstrates how GPS and LiDAR measurements can be jointly used to model the environment and obtain robust receivers. Multipath amplitude and delay are estimated by means of LiDAR feature extraction and multipath mitigation architecture. The results show the feasibility of integrating the information provided by LiDAR sensors and GNSS receivers for multipath mitigation. PMID:23202177

  3. Back-propagation imaging by exploiting multipath from point scatterers

    NASA Astrophysics Data System (ADS)

    Solimene, Raffaele; Cuccaro, Antonio

    2017-10-01

    An inverse scattering problem under the linearised Born approximation is considered for a non-homogeneous background medium. An ensemble of pointlike scatterers is oppositely deployed in the scattering scene in order to introduce multipath and to gain an advantage in the reconstruction procedure. It is well known that inverse scattering can benefit from multipath, but at the same time it can produce artefacts in the reconstructions. This is confirmed once again in this study. Indeed, we show that some artefacts, which have been discarded in some previous works, are actually the cause of resolution improvement. To this end, standard stationary phase arguments are employed along with an adjoint inversion method (backpropagation). Theoretical results succeeds in predicting the reconstruction’s leading order terms. However, spurious artefacts due to high order terms become relevant, because more than one point scatterer is used. A simple way to mitigate such artefacts without renouncing the gain in resolution is introduced for the case where the unknown scatterers are small compared to the wavelength.

  4. Target time smearing with short transmissions and multipath propagation.

    PubMed

    Harrison, Chris H

    2011-09-01

    In active sonar the target echo level is often estimated with a propagation model that adds all multipath arrivals. If the (post-correlator) transmitted pulse is short compared to the multipath time spread then there is effectively an extra loss (which may be substantial) since only a few of the paths contribute to the target echo at any one instant. This well known "time-smearing" loss is treated in a self-consistent manner with previous calculations of reverberation [Harrison, J. Acoust. Soc. Am. 114, 2744-2756 (2003)] to estimate the target response and the signal-to-reverberation-ratio. Again isovelocity water, Lambert's law, and reflection loss proportional to angle are assumed. In this important short pulse regime the target response becomes independent of boundary reflection properties but proportional to transmitted pulse length. Thus the signal-to-reverberation-ratio becomes independent of pulse length. The effect on signal-to-ambient-noise is also investigated and the resulting formulas presented in a table. © 2011 Acoustical Society of America

  5. Analysis of the Bias on the Beidou GEO Multipath Combinations

    PubMed Central

    Ning, Yafei; Yuan, Yunbin; Chai, Yanju; Huang, Yong

    2016-01-01

    The Beidou navigation satellite system is a very important sensor for positioning in the Asia-Pacific region. The Beidou inclined geosynchronous orbit (IGSO) and medium Earth orbit (MEO) satellites have been analysed in some studies previously conducted by other researchers; this paper seeks to gain more insight regarding the geostationary earth orbit (GEO) satellites. Employing correlation analysis, Fourier transformation and wavelet decomposition, we validate whether there is a systematic bias in their multipath combinations. These biases can be observed clearly in satellites C01, C02 and C04 and have a great correlation with time series instead of elevation, being significantly different from those of the Beidou IGSO and MEO satellites. We propose a correction model to mitigate this bias based on its daily periodicity characteristic. After the model has been applied, the performance of the positioning estimations of the eight stations distributed in the Asia-Pacific region is evaluated and compared. The results show that residuals of multipath series behaves random noise; for the single point positioning (SPP) and precise point positioning (PPP) approaches, the positioning accuracy in the upward direction can be improved by 8 cm and 6 mm, respectively, and by 2 cm and 4 mm, respectively, for the horizontal component. PMID:27509503

  6. QAM multi-path characterization due to ocean scattering

    SciTech Connect

    Petersen, T. L.; Bracht, R. R.; Pasquale, R. V.; Dimsdle, J.; Swanson, R.

    2002-01-01

    A series of RF channel flight characterization tests are to be run, in early March, to benchmark high speed, 16QAM multi-path performance over the ocean surface. The modulation format being tested is a 16 differential phase, absolute amplitude, two level polar quadrature amplitude modulation. The bit rate is 100 Megabits per second. This transmitted signal will be generated in a burst mode, being on for 40 microseconds once every 40 milliseconds. An aircraft will radiate the RF test signal at 5 different altitudes. The aircraft will make two inward flights at each altitude with vertical and horizontal polarization respectively. Receivers are to be placed in two different locations using circular antenna polarization. One receiver will be placed at an altitude of 230 feet above the ocean surface, and the other on a boat with the antenna placed just up off of the ocean surface. Data is to be collected over multiple wavelength changes in the difference between the line of sight and the reflected multi-path ray. The real time signal strength variation is to be recorded as well. Analysis of the resulting data will show flat fading and frequency selective fading effects. The test is run over two different days to provide for some variation in sea state conditions. This resulting information will help quantify the effectiveness of this novel modulation scheme for missile telemetry end event data applications.

  7. Analysis of the Bias on the Beidou GEO Multipath Combinations.

    PubMed

    Ning, Yafei; Yuan, Yunbin; Chai, Yanju; Huang, Yong

    2016-08-08

    The Beidou navigation satellite system is a very important sensor for positioning in the Asia-Pacific region. The Beidou inclined geosynchronous orbit (IGSO) and medium Earth orbit (MEO) satellites have been analysed in some studies previously conducted by other researchers; this paper seeks to gain more insight regarding the geostationary earth orbit (GEO) satellites. Employing correlation analysis, Fourier transformation and wavelet decomposition, we validate whether there is a systematic bias in their multipath combinations. These biases can be observed clearly in satellites C01, C02 and C04 and have a great correlation with time series instead of elevation, being significantly different from those of the Beidou IGSO and MEO satellites. We propose a correction model to mitigate this bias based on its daily periodicity characteristic. After the model has been applied, the performance of the positioning estimations of the eight stations distributed in the Asia-Pacific region is evaluated and compared. The results show that residuals of multipath series behaves random noise; for the single point positioning (SPP) and precise point positioning (PPP) approaches, the positioning accuracy in the upward direction can be improved by 8 cm and 6 mm, respectively, and by 2 cm and 4 mm, respectively, for the horizontal component.

  8. Proposal for automated transformations on single-photon multipath qudits

    NASA Astrophysics Data System (ADS)

    Baldijão, R. D.; Borges, G. F.; Marques, B.; Solís-Prosser, M. A.; Neves, L.; Pádua, S.

    2017-09-01

    We propose a method for implementing automated state transformations on single-photon multipath qudits encoded in a one-dimensional transverse spatial domain. It relies on transferring the encoding from this domain to the orthogonal one by applying a spatial phase modulation with diffraction gratings, merging all the initial propagation paths by using a stable interferometric network, and filtering out the unwanted diffraction orders. The automation feature is attained by utilizing a programmable phase-only spatial light modulator (SLM) where properly designed diffraction gratings displayed on its screen will implement the desired transformations, including, among others, projections, permutations, and random operations. We discuss the losses in the process which is, in general, inherently nonunitary. Some examples of transformations are presented and, considering a realistic scenario, we analyze how they will be affected by the pixelated structure of the SLM screen. The method proposed here enables one to implement much more general transformations on multipath qudits than is possible with a SLM alone operating in the diagonal basis of which-path states. Therefore, it will extend the range of applicability for this encoding in high-dimensional quantum information and computing protocols as well as fundamental studies in quantum theory.

  9. Avoiding Biased-Feeding in the Scheduling of Collaborative Multipath TCP

    PubMed Central

    2016-01-01

    Smartphones have become the major communication and portable computing devices that access the Internet through Wi-Fi or mobile networks. Unfortunately, users without a mobile data subscription can only access the Internet at limited locations, such as hotspots. In this paper, we propose a collaborative bandwidth sharing protocol (CBSP) built on top of MultiPath TCP (MPTCP). CBSP enables users to buy bandwidth on demand from neighbors (called Helpers) and uses virtual interfaces to bind the subflows of MPTCP to avoid modifying the implementation of MPTCP. However, although MPTCP provides the required multi-homing functionality for bandwidth sharing, the current packet scheduling in collaborative MPTCP (e.g., Co-MPTCP) leads to the so-called biased-feeding problem. In this problem, the fastest link might always be selected to send packets whenever it has available cwnd, which results in other links not being fully utilized. In this work, we set out to design an algorithm, called Scheduled Window-based Transmission Control (SWTC), to improve the performance of packet scheduling in MPTCP, and we perform extensive simulations to evaluate its performance. PMID:27529783

  10. Multipath and Doppler observations during transatlantic digital HF propagation experiments

    NASA Astrophysics Data System (ADS)

    Reinisch, B. W.; Bibl, K.; Ahmed, M.; Soicher, H.; Gorman, F.; Jodogne, J. C.

    1984-10-01

    Digital HF transatlantic propagation experiments between two nodes at Dourbes, Belgium, and Needham, MA, using identical digisonde 256 systems became operational in October 1983. Adaptive two way sounding and real time channel evaluation studies are to be conducted among the network's nodes. Presently, the Dourbes station is transmitting 10 kW pulses using a horizontal rhombic antenna while the Needham station uses a long-periodic antenna for both transmission and reception. Amplitude and Doppler shifts of different multipath modes were measured during magnetically quiescent and disturbed periods for the first month of operation. The pulse modulation enables clear separation and identification of the multihop paths. Real time discrete Fourier transforms determine the Doppler shifts imposed by height changes of the reflecting ionospheric layers. A comparison of the observed MUF's of the dominant 2F mode with the MUF's predicted by the IONCAP model show the latter to be about 20 to 30% higher.

  11. Codeless GPS Applications to Multi-Path: CGAMP

    NASA Technical Reports Server (NTRS)

    Macdoran, P. F.; Miller, R. B.; Jenkins, D.; Lemmon, J.; Gold, K.; Schreiner, W.; Snyder, G.

    1990-01-01

    Cordless Global Positioning System (GPS) Applications to Multi-Path (CGAMP) is meeting the challenge of exploiting the L-band signals from the Global Positioning System (GPS) satellites for the measurement of the impulse response of radio transmission channels over space-Earth paths. This approach was originally suggested by E. K. Smith and has been pursued by J. Lemmon, without an affordable implementation being identifiable. In addition to the high cost of a suitable P code correlating GPS receiver, there is also the major impediment of the often announced Department of Defense policy of selective availability/anti-spoof (SA/AS) that clouds reliable access to the wideband (20 MHz) P channel of the GPS signals without cryptographic access. A technique proposed by MacDoran utilizes codeless methods for exploiting the P channel signals implemented by the use of a pair of antennas and cross correlation signal detection.

  12. Multi-Path Transportation Futures Study. Results from Phase 1

    SciTech Connect

    Phil Patterson, Phil; Singh, Margaret; Plotkin, Steve; Moore, Jim

    2007-03-09

    Presentation reporting Phase 1 results, 3/9/2007. Projecting the future role of advanced drivetrains and fuels in the light vehicle market is inherently difficult, given the uncertainty (and likely volatility) of future oil prices, inadequate understanding of likely consumer response to new technologies, the relative infancy of several important new technologies with inevitable future changes in their performance and costs, and the importance — and uncertainty — of future government marketplace interventions (e.g., new regulatory standards or vehicle purchase incentives). The Multi-Path Transportation Futures (MP) Study has attempted to improve our understanding of this future role by examining several scenarios of vehicle costs, fuel prices, government subsidies, and other key factors. These are projections, not forecasts, in that they try to answer a series of “what if” questions without assigning probabilities to most of the basic assumptions.

  13. Ultrasonic simulation of MSBLS multipath fading for orbiter landing configuration

    NASA Technical Reports Server (NTRS)

    Hayre, H. S.

    1978-01-01

    The on-shuttle antenna pattern of the MSBLS receiver, and the azimuth and elevation beamwidths were simulated by their corresponding ultrasonic transducer beams. The scanning rate for the azimuth and elevation beams was 1.75 degrees/second. The results were adjusted for full-scale maximum sinusoidal scan rates of 691 and 377 deg/sec for AZ and EL respectively. The rain drops were simulated by air bubbles, with a similar size distribution, in water. The rain volume was created along a part of the propagation path, and not on the runway, because it was found difficult to avoid an accumulation of bubbles on the runway surface and surroundings simulated by the model surface. Multipath fading from the ground, and its possible degrading effect on the orbiter received beam shape and the associated landing guidance parameters is discussed.

  14. Multipath effect suppression for instrument landing system based on MUSIC

    NASA Astrophysics Data System (ADS)

    Zhao, Xiubin; Wang, Yongsheng; Jiang, Hengle; Dai, Chuanjin

    2005-11-01

    The Decimeter-wavelength Instrument Landing System is designed to assure an exact and timely flight arrival on many airports. But its signal can often be distorted by reflections and scattering caused by objects which are illuminated by the radiating antennas, sometimes referred to be "multipath", which pose a great threat to the system's operation. In this paper, an improved receiver based on spatial spectrum estimation concepts is proposed for safer automatic landing procedures. The new approach is based on Direction of Arrival (DOA) estimation performed by the MUSIC algorithm and signal filter performed by beamforming algorithm. The superior performance of the proposed system with respect to currently employed techniques in the presence of unwanted interferences has been tested in extensive computer simulations.

  15. Navigation Signal Disturbances by Multipath Propagation - Scaled Measurements with a Universal Channel Sounder Architecture

    NASA Astrophysics Data System (ADS)

    Geise, Robert; Neubauer, Bjoern; Zimmer, Georg

    2015-11-01

    The performance of navigation systems is always reduced by unwanted multipath propagation. This is especially of practical importance for airborne navigation systems like the instrument landing system (ILS) or the VHF omni directional radio range (VOR). Nevertheless, the quantitative analysis of corresponding, potentially harmful multipath propagation disturbances is very difficult due to the large parameter space. Experimentally difficulties arise due to very expensive, real scale measurement campaigns and numerical simulation techniques still have shortcomings which are briefly discussed. In this contribution a new universal approach is introduced on how to measure very flexibly multipath propagation effects for arbitrary navigation systems using a channel sounder architecture in a scaled measurement environment. Two relevant scenarios of multipath propagation and the impact on navigation signals are presented. The first describes disturbances of the ILS due to large taxiing aircraft. The other example shows the influence of rotating wind turbines on the VOR.

  16. Validation of GNSS Multipath Model for Space Proximity Operations Using the Hubble Servicing Mission 4 Experiment

    NASA Technical Reports Server (NTRS)

    Ashman, Ben; Veldman, Jeanette; Axelrad, Penina; Garrison, James; Winternitz, Luke

    2016-01-01

    In the rendezvous and docking of spacecraft, GNSS signals can reflect off the target vehicle and cause prohibitively large errors in the chaser vehicle receiver at ranges below 200 meters. It has been proposed that the additional ray paths, or multipath, be used as a source of information about the state of the target relative to the receiver. With Hubble Servicing Mission 4 as a case study, electromagnetic ray tracing has been used to construct a model of reflected signals from known geometry. Oscillations in the prompt correlator power due to multipath, known as multipath fading, are studied as a means of model validation. Agreement between the measured and simulated multipath fading serves to confirm the presence of signals reflected off the target spacecraft that might be used for relative navigation.

  17. Validation of GNSS Multipath Model for Space Proximity Operations Using the Hubble Servicing Mission 4 Experiment

    NASA Technical Reports Server (NTRS)

    Ashman, B. W.; Veldman, J. L.; Axelrad, P.; Garrison, J. L.; Winternitz, L. B.

    2016-01-01

    In the rendezvous and docking of spacecraft, GNSS signals can reflect off the target vehicle and cause large errors in the chaser vehicle receiver at ranges below a few hundred meters. It has been proposed that the additional ray paths, or multipath, be used as a source of information about the state of the target relative to the receiver. With Hubble Servicing Mission 4 as a case study, electromagnetic ray tracing has been used to construct a model of reflected signals from known geometry. Oscillations in the prompt correlator power due to multipath, known as multipath fading, are studied as a means of model validation. Agreement between the measured and simulated multipath fading serves to confirm the presence of signals reflected off the target spacecraft that might be used for relative navigation.

  18. Definition of multipath/RFI experiments for orbital testing with a small applications technology satellite

    NASA Technical Reports Server (NTRS)

    Birch, J. N.; French, R. H.

    1972-01-01

    An investigation was made to define experiments for collection of RFI and multipath data for application to a synchronous relay satellite/low orbiting satellite configuration. A survey of analytical models of the multipath signal was conducted. Data has been gathered concerning the existing RFI and other noise sources in various bands at VHF and UHF. Additionally, designs are presented for equipment to combat the effects of RFI and multipath: an adaptive delta mod voice system, a forward error control coder/decoder, a PN transmission system, and a wideband FM system. The performance of these systems was then evaluated. Techniques are discussed for measuring multipath and RFI. Finally, recommended data collection experiments are presented. An extensive tabulation is included of theoretical predictions of the amount of signal reflected from a rough, spherical earth.

  19. MLS Multipath Studies. Phase 3. Volume 3. Application of Models to MLS Assessment Issues. Part 2.

    DTIC Science & Technology

    1981-06-08

    time evidently were such as to suggest a suboptimum ap- proach based on the small signal suppression properties of a multiple baseline * ,interferometer...features of the proposed implementation signifi- cantly degraded the azimuth multipath performance. The proposed acquisition algorithm utilizing multiple ... baseline interfer- ometry could fail with out of beam multipath at lower levels than those re- quired for failure with DMLS or TRSB. These problems

  20. Demand, Growth, and Evolution

    ERIC Educational Resources Information Center

    Hoskins, Barbara

    2011-01-01

    The paradigm shift to engaged and collaborative learning delivered via distance education technologies has been led by practitioners in adult and continuing education. Online and blended courses are experiencing increased demand and continued growth at all levels of higher education, professional development, and K-12 education. Adult and…

  1. Performance analysis of passive time reversal communication technique for multipath interference in shallow sea acoustic channel

    NASA Astrophysics Data System (ADS)

    Kida, Yukihiro; Shimura, Takuya; Deguchi, Mitsuyasu; Watanabe, Yoshitaka; Ochi, Hiroshi; Meguro, Koji

    2017-07-01

    In this study, the performance of passive time reversal (PTR) communication techniques in multipath rich underwater acoustic environments is investigated. It is recognized empirically and qualitatively that a large number of multipath arrivals could generally raise the demodulation result of PTR. However, the relationship between multipath and the demodulation result is hardly evaluated quantitatively. In this study, the efficiency of the PTR acoustic communication techniques for multipath interference cancelation was investigated quantitatively by applying a PTR-DFE (decision feed-back filter) scheme to a synthetic dataset of a horizontal underwater acoustic channel. Mainly, in this study, we focused on the relationship between the signal-to-interference ratio (SIR) of datasets and the output signal-to-noise ratio (OSNR) of demodulation results by a parametric study approach. As a result, a proportional relation between SIR and OSNR is confirmed in low-SNR datasets. It was also found that PTR has a performance limitation, that is OSNR converges to a typical value depending on the number of receivers. In conclusion, results indicate that PTR could utilize the multipath efficiently and also withstand the negative effects of multipath interference at a given limitation.

  2. The multipath and SNR Quality in civil code L2

    NASA Astrophysics Data System (ADS)

    Polezel, W. G.; Souza, E. M.; Monico, J. F.

    2007-12-01

    The new generation of GPS satellites, with the addition of the new L2C civil code, may provide to the users better positioning capabilities. The new code in the L2 may increase the signal robustness, improve resistance to interference, reduce tracking noise and consequently, improve accuracy and provide better positioning inside buildings and in wooded areas. The second civil frequency code will eliminate the need of using fragile semi- codeless tracking techniques currently used in connection with L2. The L2C has a different structure that allows civil and military share the same code. L2C owns two codes of different length: moderate code (CM) and long code (CL). The CM was chosen to have 10.230 chips repeated to every 20 millisecond. The CL was chosen to have 767250 chips with period of 1.5 second. The main reasons for these choices were due to excellent correlation properties. Furthermore, L2C enhances performance by having no data modulation on CL code, which improves, among others, the threshold tracking performance. Comparing the L2C acquisition with the C/A, the CM code is ten times longer than the C/A and the two components have half the total power. This is an important feature for many low-power applications. Although this signal has several advantages, some investigations about its performance are necessary, mainly about the provided accuracy under some effects, for example, multipath. Thus, this paper aims to analyze the L2C signal, as well as its quality using some parameters, such as Signal to Noise Ratio (SNR) and multipath level (MP). The experiment was realized at Sao Paulo State University UNESP in Presidente Prudente, Brazil. The data were collected by two receivers of different brands, both able to collect the L2C signal, and connected to the same antenna, thought the use of a splitter. The results showed that the MP and SNR values were better for the modernized satellites. Furthermore, the SNR values of the two receivers were similar while the

  3. Multipathing Via Three Parameter Common Image Gathers (CIGs) From Reverse Time Migration

    NASA Astrophysics Data System (ADS)

    Ostadhassan, M.; Zhang, X.

    2015-12-01

    A noteworthy problem for seismic exploration is effects of multipathing (both wanted or unwanted) caused by subsurface complex structures. We show that reverse time migration (RTM) combined with a unified, systematic three parameter framework that flexibly handles multipathing can be accomplished by adding one more dimension (image time) to the angle domain common image gather (ADCIG) data. RTM is widely used to generate prestack depth migration images. When using the cross-correlation image condition in 2D prestack migration in RTM, the usual practice is to sum over all the migration time steps. Thus all possible wave types and paths automatically contribute to the resulting image, including destructive wave interferences, phase shifts, and other distortions. One reason is that multipath (prismatic wave) contributions are not properly sorted and mapped in the ADCIGs. Also, multipath arrivals usually have different instantaneous attributes (amplitude, phase and frequency), and if not separated, the amplitudes and phases in the final prestack image will not stack coherently across sources. A prismatic path satisfies an image time for it's unique path; Cavalca and Lailly (2005) show that RTM images with multipaths can provide more complete target information in complex geology, as multipaths usually have different incident angles and amplitudes compared to primary reflections. If the image time slices within a cross-correlation common-source migration are saved for each image time, this three-parameter (incident angle, depth, image time) volume can be post-processed to generate separate, or composite, images of any desired subset of the migrated data. Images can by displayed for primary contributions, any combination of primary and multipath contributions (with or without artifacts), or various projections, including the conventional ADCIG (angle vs depth) plane. Examples show that signal from the true structure can be separated from artifacts caused by multiple

  4. Ultrasonic Multipath and Beamforming Clutter Reduction: A Chirp Model Approach

    PubMed Central

    Byram, Brett; Jakovljevic, Marko

    2014-01-01

    In vivo ultrasonic imaging with transducer arrays suffers from image degradation due to beamforming limitations, which includes diffraction limited beamforming as well as beamforming degradation due to tissue inhomogeneity. Additionally, based on recent studies, multipath scattering also causes significant image degradation. To reduce degradation from both sources, we propose a model-based, signal decomposition scheme. The proposed algorithm identifies spatial frequency signatures to decompose received wavefronts into their most significant scattering sources. Scattering sources originating from a region of interest are used to reconstruct decluttered wavefronts, which are beamformed into decluttered radio frequency (RF) scan lines or A-lines. To test the algorithm, ultrasound system channel data were acquired during liver scans from 8 patients. Multiple data sets were acquired from each patient, with 55 total data sets, 43 of which had identifiable hypoechoic regions on normal B-mode images. The data sets with identifiable hypoechoic regions were analyzed. The results show the decluttered B-mode images have an average improvement in contrast over normal images of 7.3±4.6 dB. The CNR changed little on average between normal and decluttered B-mode, −0.4±5.9 dB. The in vivo speckle SNR decreased; the change was −0.65±0.28. Phantom speckle SNR also decreased but only by −0.40±0.03. PMID:24569248

  5. A Secure Cluster-Based Multipath Routing Protocol for WMSNs

    PubMed Central

    Almalkawi, Islam T.; Zapata, Manel Guerrero; Al-Karaki, Jamal N.

    2011-01-01

    The new characteristics of Wireless Multimedia Sensor Network (WMSN) and its design issues brought by handling different traffic classes of multimedia content (video streams, audio, and still images) as well as scalar data over the network, make the proposed routing protocols for typical WSNs not directly applicable for WMSNs. Handling real-time multimedia data requires both energy efficiency and QoS assurance in order to ensure efficient utility of different capabilities of sensor resources and correct delivery of collected information. In this paper, we propose a Secure Cluster-based Multipath Routing protocol for WMSNs, SCMR, to satisfy the requirements of delivering different data types and support high data rate multimedia traffic. SCMR exploits the hierarchical structure of powerful cluster heads and the optimized multiple paths to support timeliness and reliable high data rate multimedia communication with minimum energy dissipation. Also, we present a light-weight distributed security mechanism of key management in order to secure the communication between sensor nodes and protect the network against different types of attacks. Performance evaluation from simulation results demonstrates a significant performance improvement comparing with existing protocols (which do not even provide any kind of security feature) in terms of average end-to-end delay, network throughput, packet delivery ratio, and energy consumption. PMID:22163854

  6. Millimeter-wave multipath measurements on snow cover

    NASA Astrophysics Data System (ADS)

    Lammers, Uve H. W.; Hayes, Dallas T.; Marr, Richard A.

    1988-05-01

    Multipath data were obtained at frequencies of 35.1, 98.1, and 140.1 GHz over a pathlength of 179.5 m by measuring height-gain patterns between 0.2 and 4.0 m with a vertically moving receiving antenna. Grazing angles from this geometry range between 0.5 and 2 deg measured interference patterns between direct and snow-reflected rays were generally coherent in appearance and on occassion exhibited cancellation depths greater than 20 dB. A computer program models the reflection as a coherent process, with the underlying snow surface represented by a series of linear sloping segments derived from actual terrain heights. The reflection coefficient near a 2-deg grazing angle ranged from 0.53 to 0.20 over matted grass, from 0.66 to 0.34 over freshly fallen snow, and from 0.85 to 0.71 over old snow. The higher numbers correspond to 35.1 GHz, the lower numbers correspond to 140.1 GHz.

  7. Ultrasonic multipath and beamforming clutter reduction: a chirp model approach.

    PubMed

    Byram, Brett; Jakovljevic, Marko

    2014-03-01

    In vivo ultrasonic imaging with transducer arrays suffers from image degradation resulting from beamforming limitations, including diffraction-limited beamforming and beamforming degradation caused by tissue inhomogeneity. Additionally, based on recent studies, multipath scattering also causes significant image degradation. To reduce degradation from both sources, we propose a model-based signal decomposition scheme. The proposed algorithm identifies spatial frequency signatures to decompose received wavefronts into their most significant scattering sources. Scattering sources originating from a region of interest are used to reconstruct decluttered wavefronts, which are beamformed into decluttered RF scan lines or A-lines. To test the algorithm, ultrasound system channel data were acquired during liver scans from 8 patients. Multiple data sets were acquired from each patient, with 55 total data sets, 43 of which had identifiable hypoechoic regions on normal B-mode images. The data sets with identifiable hypoechoic regions were analyzed. The results show the decluttered B-mode images have an average improvement in contrast over normal images of 7.3 ± 4.6 dB. The contrast-to-noise ratio (CNR) changed little on average between normal and decluttered Bmode, -0.4 ± 5.9 dB. The in vivo speckle SNR decreased; the change was -0.65 ± 0.28. Phantom speckle SNR also decreased, but only by -0.40 ± 0.03.

  8. Modeling Infrared Signal Reflections to Characterize Indoor Multipath Propagation

    PubMed Central

    De-La-Llana-Calvo, Álvaro; Lázaro-Galilea, José Luis; Gardel-Vicente, Alfredo; Rodríguez-Navarro, David; Bravo-Muñoz, Ignacio; Tsirigotis, Georgios; Iglesias-Miguel, Juan

    2017-01-01

    In this paper, we propose a model to characterize Infrared (IR) signal reflections on any kind of surface material, together with a simplified procedure to compute the model parameters. The model works within the framework of Local Positioning Systems (LPS) based on IR signals (IR-LPS) to evaluate the behavior of transmitted signal Multipaths (MP), which are the main cause of error in IR-LPS, and makes several contributions to mitigation methods. Current methods are based on physics, optics, geometry and empirical methods, but these do not meet our requirements because of the need to apply several different restrictions and employ complex tools. We propose a simplified model based on only two reflection components, together with a method for determining the model parameters based on 12 empirical measurements that are easily performed in the real environment where the IR-LPS is being applied. Our experimental results show that the model provides a comprehensive solution to the real behavior of IR MP, yielding small errors when comparing real and modeled data (the mean error ranges from 1% to 4% depending on the environment surface materials). Other state-of-the-art methods yielded mean errors ranging from 15% to 40% in test measurements. PMID:28406436

  9. Multicarrier chaotic communications in multipath fading channels without channel estimation

    SciTech Connect

    Wang, Shilian Zhang, Zhili

    2015-01-15

    A multi-carrier chaotic shift keying(MC-CSK) communication scheme with low probability of interception(LPI) is proposed in this article. We apply chaotic spreading sequences in the frequency domain, mapping a different chip of a chaotic sequence to an individual orthogonal frequency division multiplexing(OFDM) subcarrier. In each block size of $M$ OFDM symbols, we use one pilot OFDM symbol inserted time-spaced in all-frequency to transmit the reference chaotic signal and use the other M-1 OFDM symbols to transmit the information-bearing signals each spreaded by the reference chaotic signal. At the receiver, we construct a differential detector after DFT and recover the information bits from the correlations between the pilot OFDM symbol and the other M-1 OFDM symbols in each block size of M. Performance analysis and computer simulations show that the MC-CSK outperforms differential chaos shift keying(DCSK) in AWGN channels with high bandwidth efficiency for the block size of M=2 and that the MC-CSK exploits effectively the frequent diversity of the multipath channel.

  10. A secure cluster-based multipath routing protocol for WMSNs.

    PubMed

    Almalkawi, Islam T; Zapata, Manel Guerrero; Al-Karaki, Jamal N

    2011-01-01

    The new characteristics of Wireless Multimedia Sensor Network (WMSN) and its design issues brought by handling different traffic classes of multimedia content (video streams, audio, and still images) as well as scalar data over the network, make the proposed routing protocols for typical WSNs not directly applicable for WMSNs. Handling real-time multimedia data requires both energy efficiency and QoS assurance in order to ensure efficient utility of different capabilities of sensor resources and correct delivery of collected information. In this paper, we propose a Secure Cluster-based Multipath Routing protocol for WMSNs, SCMR, to satisfy the requirements of delivering different data types and support high data rate multimedia traffic. SCMR exploits the hierarchical structure of powerful cluster heads and the optimized multiple paths to support timeliness and reliable high data rate multimedia communication with minimum energy dissipation. Also, we present a light-weight distributed security mechanism of key management in order to secure the communication between sensor nodes and protect the network against different types of attacks. Performance evaluation from simulation results demonstrates a significant performance improvement comparing with existing protocols (which do not even provide any kind of security feature) in terms of average end-to-end delay, network throughput, packet delivery ratio, and energy consumption.

  11. Modeling of Doppler frequency shift in multipath radiochannels

    NASA Astrophysics Data System (ADS)

    Penzin, Maksim; Iyin, Nikolay

    2016-06-01

    We discuss the modeling of propagation of a quasi-monochromatic radio signal, represented by a coherent pulse sequence, in a non-stationary multipath radio channel. In such a channel, signal propagation results in the observed frequency shift for each ray (Doppler effect). The modeling is based on the assumption that during propagation of a single pulse a channel can be considered stationary. A phase change in the channel transfer function is shown to cause the observed frequency shift in the received signal. Thus, instead of measuring the Doppler frequency shift, we can measure the rate of change in the mean phase of one pulse relative to another. The modeling is carried out within the framework of the method of normal waves. The method enables us to model the dynamics of the electromagnetic field at a given point with the required accuracy. The modeling reveals that a local change in ionospheric conditions more severely affects the rays whose reflection region is in the area where the changes occur.

  12. A Multipath Cubic TCP Congestion Control with Multipath Fast Recovery over High Bandwidth-Delay Product Networks

    NASA Astrophysics Data System (ADS)

    Le, Tuan Anh; Haw, Rim; Hong, Choong Seon; Lee, Sungwon

    Cubic TCP, one of transport protocols designed for high bandwidth-delay product (BDP) networks, has successfully been deployed in the Internet. Multi-homed computers with multiple interfaces to access the Internet via high speed links will become more popular. In this work, we introduce an extended version of Cubic TCP for multiple paths, called MPCubic. The extension process is approached from an analysis model of Cubic by using coordinated congestion control between paths. MPCubic can spread its traffic across paths in load-balancing manner, while preserving fair sharing with regular TCP, Cubic, and MPTCP at common bottlenecks. Moreover, to improve resilience to link failure, we propose a multipath fast recovery algorithm. The algorithm can significantly reduce the recovery time of data rate after restoration of failed links. These techniques can be useful for resilient high-bandwidth applications (for example, tele-health conference) in disaster-affected areas. Our simulation results show that MPCubic can achieve stability, throughput improvement, fairness, load-balancing, and quick data rate recovery from link failure under a variety of network conditions.

  13. Global Navigation Satellite System Multipath Mitigation Using a Wave-Absorbing Shield.

    PubMed

    Yang, Haiyan; Yang, Xuhai; Sun, Baoqi; Su, Hang

    2016-08-22

    Code multipath is an unmanaged error source in precise global navigation satellite system (GNSS) observation processing that limits GNSS positioning accuracy. A new technique for mitigating multipath by installing a wave-absorbing shield is presented in this paper. The wave-absorbing shield was designed according to a GNSS requirement of received signals and collected measurements to achieve good performance. The wave-absorbing shield was installed at the KUN1 and SHA1 sites of the international GNSS Monitoring and Assessment System (iGMAS). Code and carrier phase measurements of three constellations were collected on the dates of the respective installations plus and minus one week. Experiments were performed in which the multipath of the measurements obtained at different elevations was mitigated to different extents after applying the wave-absorbing shield. The results of an analysis and comparison show that the multipath was mitigated by approximately 17%-36% on all available frequencies of BeiDou Navigation Satellite System (BDS), Global Positioning System (GPS), and Global Navigation Satellite System (GLONASS) satellites. The three-dimensional accuracies of BDS, GPS, and GLONASS single-point positioning (SPP) were, respectively, improved by 1.07, 0.63 and 0.49 m for the KUN1 site, and by 0.72, 0.79 and 0.73 m for the SHA1 site. Results indicate that the multipath of the original observations was mitigated by using the wave-absorbing shield.

  14. Global Navigation Satellite System Multipath Mitigation Using a Wave-Absorbing Shield

    PubMed Central

    Yang, Haiyan; Yang, Xuhai; Sun, Baoqi; Su, Hang

    2016-01-01

    Code multipath is an unmanaged error source in precise global navigation satellite system (GNSS) observation processing that limits GNSS positioning accuracy. A new technique for mitigating multipath by installing a wave-absorbing shield is presented in this paper. The wave-absorbing shield was designed according to a GNSS requirement of received signals and collected measurements to achieve good performance. The wave-absorbing shield was installed at the KUN1 and SHA1 sites of the international GNSS Monitoring and Assessment System (iGMAS). Code and carrier phase measurements of three constellations were collected on the dates of the respective installations plus and minus one week. Experiments were performed in which the multipath of the measurements obtained at different elevations was mitigated to different extents after applying the wave-absorbing shield. The results of an analysis and comparison show that the multipath was mitigated by approximately 17%–36% on all available frequencies of BeiDou Navigation Satellite System (BDS), Global Positioning System (GPS), and Global Navigation Satellite System (GLONASS) satellites. The three-dimensional accuracies of BDS, GPS, and GLONASS single-point positioning (SPP) were, respectively, improved by 1.07, 0.63 and 0.49 m for the KUN1 site, and by 0.72, 0.79 and 0.73 m for the SHA1 site. Results indicate that the multipath of the original observations was mitigated by using the wave-absorbing shield. PMID:27556466

  15. BDS relative static positioning over long baseline improved by GEO multipath mitigation

    NASA Astrophysics Data System (ADS)

    Wang, Min; Chai, Hongzhou; Liu, Jun; Zeng, Anmin

    2016-02-01

    Due to the satellite and constellation deployment design, the variation pattern of multipath effect in BeiDou Navigation Satellite System (BDS) code observation is different from GPS. The amplitude of systematic multipath variation (SMV) exists in multipath combination series may exceed 0.5 m for some geostationary earth orbit (GEO) satellites, which is larger than the normal noise level of GPS code observation. After characterization of the variation pattern of BDS multipath series for BDS GEO satellites, we propose to improve the performance of relative positioning over long baseline by mitigating the SMV effect of GEO satellite. The proposed method uses the SMV extracted from multipath (MP) combination series with adaptive wavelet transform as correction for current day observation in post-processing use or as following day correction in real-time use. In addition, the Double Station Observation Processing (DSOP) method that directly uses undifferenced observation is applied for relative static positioning. Experiment results show improvement in convergence speed for both BDS only and BDS/GPS combined solution.

  16. A novel communication mechanism based on node potential multi-path routing

    NASA Astrophysics Data System (ADS)

    Bu, Youjun; Zhang, Chuanhao; Jiang, YiMing; Zhang, Zhen

    2016-10-01

    With the network scales rapidly and new network applications emerge frequently, bandwidth supply for today's Internet could not catch up with the rapid increasing requirements. Unfortunately, irrational using of network sources makes things worse. Actual network deploys single-next-hop optimization paths for data transmission, but such "best effort" model leads to the imbalance use of network resources and usually leads to local congestion. On the other hand Multi-path routing can use the aggregation bandwidth of multi paths efficiently and improve the robustness of network, security, load balancing and quality of service. As a result, multi-path has attracted much attention in the routing and switching research fields and many important ideas and solutions have been proposed. This paper focuses on implementing the parallel transmission of multi next-hop data, balancing the network traffic and reducing the congestion. It aimed at exploring the key technologies of the multi-path communication network, which could provide a feasible academic support for subsequent applications of multi-path communication networking. It proposed a novel multi-path algorithm based on node potential in the network. And the algorithm can fully use of the network link resource and effectively balance network link resource utilization.

  17. Simulation Distances

    NASA Astrophysics Data System (ADS)

    Černý, Pavol; Henzinger, Thomas A.; Radhakrishna, Arjun

    Boolean notions of correctness are formalized by preorders on systems. Quantitative measures of correctness can be formalized by real-valued distance functions between systems, where the distance between implementation and specification provides a measure of "fit" or "desirability." We extend the simulation preorder to the quantitative setting, by making each player of a simulation game pay a certain price for her choices. We use the resulting games with quantitative objectives to define three different simulation distances. The correctness distance measures how much the specification must be changed in order to be satisfied by the implementation. The coverage distance measures how much the implementation restricts the degrees of freedom offered by the specification. The robustness distance measures how much a system can deviate from the implementation description without violating the specification. We consider these distances for safety as well as liveness specifications. The distances can be computed in polynomial time for safety specifications, and for liveness specifications given by weak fairness constraints. We show that the distance functions satisfy the triangle inequality, that the distance between two systems does not increase under parallel composition with a third system, and that the distance between two systems can be bounded from above and below by distances between abstractions of the two systems. These properties suggest that our simulation distances provide an appropriate basis for a quantitative theory of discrete systems. We also demonstrate how the robustness distance can be used to measure how many transmission errors are tolerated by error correcting codes.

  18. Heterogeneous all-solid multicore fiber based multipath Michelson interferometer for high temperature sensing.

    PubMed

    Duan, Li; Zhang, Peng; Tang, Ming; Wang, Ruoxu; Zhao, Zhiyong; Fu, Songnian; Gan, Lin; Zhu, Benpeng; Tong, Weijun; Liu, Deming; Shum, Perry Ping

    2016-09-05

    A compact high temperature sensor utilizing a multipath Michelson interferometer (MI) structure based on weak coupling multicore fiber (MCF) is proposed and experimentally demonstrated. The device is fabricated by program-controlled tapering the spliced region between single mode fiber (SMF) and a segment of MCF. After that, a spherical reflective structure is formed by arc-fusion splicing the end face of MCF. Theoretical analysis has been implemented for this specific multipath MI structure; beam propagation method based simulation and corresponding experiments were performed to investigate the effect of taper and spherical end face on system's performance. Benefiting from the multipath interferences and heterogeneous structure between the center core and surrounding cores of the all-solid MCF, an enhanced temperature sensitivity of 165 pm/°C up to 900°C and a high-quality interference spectrum with 25 dB fringe visibility were achieved.

  19. Analysis and exploitation of multipath ghosts in radar target image classification.

    PubMed

    Smith, Graeme E; Mobasseri, Bijan G

    2014-04-01

    An analysis of the relationship between multipath ghosts and the direct target image for radar imaging is presented. A multipath point spread function (PSF) is defined that allows for specular reflections in the local environment and can allow the ghost images to be localized. Analysis of the multipath PSF shows that certain ghosts can only be focused for the far field synthetic aperture radar case and not the full array case. Importantly, the ghosts are shown to be equivalent to direct target images taken from different observation angles. This equivalence suggests that exploiting the ghosts would improve target classification performance, and this improvement is demonstrated using experimental data and a naïve Bayesian classifer. The maximum performance gain achieved is 32%.

  20. Evaluation of Two Computational Techniques of Calculating Multipath Using Global Positioning System Carrier Phase Measurements

    NASA Technical Reports Server (NTRS)

    Gomez, Susan F.; Hood, Laura; Panneton, Robert J.; Saunders, Penny E.; Adkins, Antha; Hwu, Shian U.; Lu, Ba P.

    1996-01-01

    Two computational techniques are used to calculate differential phase errors on Global Positioning System (GPS) carrier war phase measurements due to certain multipath-producing objects. The two computational techniques are a rigorous computati electromagnetics technique called Geometric Theory of Diffraction (GTD) and the other is a simple ray tracing method. The GTD technique has been used successfully to predict microwave propagation characteristics by taking into account the dominant multipath components due to reflections and diffractions from scattering structures. The ray tracing technique only solves for reflected signals. The results from the two techniques are compared to GPS differential carrier phase ns taken on the ground using a GPS receiver in the presence of typical International Space Station (ISS) interference structures. The calculations produced using the GTD code compared to the measured results better than the ray tracing technique. The agreement was good, demonstrating that the phase errors due to multipath can be modeled and characterized using the GTD technique and characterized to a lesser fidelity using the DECAT technique. However, some discrepancies were observed. Most of the discrepancies occurred at lower devations and were either due to phase center deviations of the antenna, the background multipath environment, or the receiver itself. Selected measured and predicted differential carrier phase error results are presented and compared. Results indicate that reflections and diffractions caused by the multipath producers, located near the GPS antennas, can produce phase shifts of greater than 10 mm, and as high as 95 mm. It should be noted tl the field test configuration was meant to simulate typical ISS structures, but the two environments are not identical. The GZ and DECAT techniques have been used to calculate phase errors due to multipath o the ISS configuration to quantify the expected attitude determination errors.

  1. A Forward GPS Multipath Simulator Based on the Vegetation Radiative Transfer Equation Model.

    PubMed

    Wu, Xuerui; Jin, Shuanggen; Xia, Junming

    2017-06-05

    Global Navigation Satellite Systems (GNSS) have been widely used in navigation, positioning and timing. Nowadays, the multipath errors may be re-utilized for the remote sensing of geophysical parameters (soil moisture, vegetation and snow depth), i.e., GPS-Multipath Reflectometry (GPS-MR). However, bistatic scattering properties and the relation between GPS observables and geophysical parameters are not clear, e.g., vegetation. In this paper, a new element on bistatic scattering properties of vegetation is incorporated into the traditional GPS-MR model. This new element is the first-order radiative transfer equation model. The new forward GPS multipath simulator is able to explicitly link the vegetation parameters with GPS multipath observables (signal-to-noise-ratio (SNR), code pseudorange and carrier phase observables). The trunk layer and its corresponding scattering mechanisms are ignored since GPS-MR is not suitable for high forest monitoring due to the coherence of direct and reflected signals. Based on this new model, the developed simulator can present how the GPS signals (L1 and L2 carrier frequencies, C/A, P(Y) and L2C modulations) are transmitted (scattered and absorbed) through vegetation medium and received by GPS receivers. Simulation results show that the wheat will decrease the amplitudes of GPS multipath observables (SNR, phase and code), if we increase the vegetation moisture contents or the scatters sizes (stem or leaf). Although the Specular-Ground component dominates the total specular scattering, vegetation covered ground soil moisture has almost no effects on the final multipath signatures. Our simulated results are consistent with previous results for environmental parameter detections by GPS-MR.

  2. A Forward GPS Multipath Simulator Based on the Vegetation Radiative Transfer Equation Model

    PubMed Central

    Wu, Xuerui; Jin, Shuanggen; Xia, Junming

    2017-01-01

    Global Navigation Satellite Systems (GNSS) have been widely used in navigation, positioning and timing. Nowadays, the multipath errors may be re-utilized for the remote sensing of geophysical parameters (soil moisture, vegetation and snow depth), i.e., GPS-Multipath Reflectometry (GPS-MR). However, bistatic scattering properties and the relation between GPS observables and geophysical parameters are not clear, e.g., vegetation. In this paper, a new element on bistatic scattering properties of vegetation is incorporated into the traditional GPS-MR model. This new element is the first-order radiative transfer equation model. The new forward GPS multipath simulator is able to explicitly link the vegetation parameters with GPS multipath observables (signal-to-noise-ratio (SNR), code pseudorange and carrier phase observables). The trunk layer and its corresponding scattering mechanisms are ignored since GPS-MR is not suitable for high forest monitoring due to the coherence of direct and reflected signals. Based on this new model, the developed simulator can present how the GPS signals (L1 and L2 carrier frequencies, C/A, P(Y) and L2C modulations) are transmitted (scattered and absorbed) through vegetation medium and received by GPS receivers. Simulation results show that the wheat will decrease the amplitudes of GPS multipath observables (SNR, phase and code), if we increase the vegetation moisture contents or the scatters sizes (stem or leaf). Although the Specular-Ground component dominates the total specular scattering, vegetation covered ground soil moisture has almost no effects on the final multipath signatures. Our simulated results are consistent with previous results for environmental parameter detections by GPS-MR. PMID:28587255

  3. Localization of a noisy broadband surface target using time differences of multipath arrivals.

    PubMed

    Gebbie, John; Siderius, Martin; McCargar, Reid; Allen, John S; Pusey, Grant

    2013-07-01

    Previous studies [Tiemann et al., J. Acoust. Soc. Am. 120, 2355-2365 (2006)] have reported the localization of marine mammals in 3-D from their clicks using multipath arrivals. Bathymetric variations were advantageously used to predict multipath arrival times with a raytracer. These arrivals are directly discernible from the time series for impulsive sources, such as whale clicks, but extension of the method to continuous broadband sources presents additional complications. By pulse compressing noise emitted from a small boat using two hydrophones, the hyperbolic direct-arrival ambiguity can be refined in both range and bearing. Acoustic-derived results are validated with target GPS measurements.

  4. Distance Learning.

    ERIC Educational Resources Information Center

    Orey, Michael; Koenecke, Lynne; Snider, Richard C.; Perkins, Ross A.; Holmes, Glen A.; Lockee, Barbara B.; Moller, Leslie A.; Harvey, Douglas; Downs, Margaret; Godshalk, Veronica M.

    2003-01-01

    Contains four articles covering trends and issues on distance learning including: the experience of two learners learning via the Internet; a systematic approach to determining the scalability of a distance education program; identifying factors that affect learning community development and performance in asynchronous distance education; and…

  5. Demanding Satisfaction

    ERIC Educational Resources Information Center

    Oguntoyinbo, Lekan

    2010-01-01

    It was the kind of crisis most universities dread. In November 2006, a group of minority student leaders at Indiana University-Purdue University Indianapolis (IUPUI) threatened to sue the university if administrators did not heed demands that included providing more funding for multicultural student groups. This article discusses how this threat…

  6. SVD Approaches in Multisource, Multipath Passive Array Processing.

    NASA Astrophysics Data System (ADS)

    Lo, Chien-Kuo

    Several system identification techniques have been proposed to treat high resolution directional finding problems in passive sonar, radar, and communication systems. In this dissertation, we present a new covariance approximation approach. The covariance matrices of source signals, in stationary environments often have a special form known as Toeplitz matrix. Our approach is based on what is known as the Toeplitz approximation method (TAM) via Singular Value Decomposition (SVD) in stochastic realization theory, which can deal with the color noise environment and the correlated sources. One of such practical situations is the multipath situation. To reduce the effect of rounding errors incurred in spectrum estimation algorithm, a SVD state space modeling is suggested. It offers the important advantage of low sensitivity to the perturbation of parameter estimation. Using the TAM approach we can first obtain source bearing information, and then cancel undesired signals. For cancellation, we introduce a Least-Square beamformer to form an adaptive spatial filter network. The weighting vector of our spatial filter is derived using a Gram-Schmidt partial orthogonalization procedure which leads to an adaptive scheme, allowing computational savings. This recursive algorithm enjoys another important feature in that it may be implemented in a compact VLSI array processor, such as wavefront/systolic array processors. This implementation aspect is critical for real-time processing applications. Another problem discussed in the dissertation is that of determining desired or undesired path directions from target source under the hypothesis of given correlation coefficients. For that we first formulate the path identification criterion. The decision criterion is based upon the probability density function for estimated path correlation coefficients. The performance of such criterion is also discussed. Extensive simulations have been conducted and the simulation results indicate

  7. Continuing Engineering Education through Distance Learning

    ERIC Educational Resources Information Center

    Baukal, C. E.

    2010-01-01

    The demand for distance continuing engineering education (CEE) is growing. This article describes the following with regard to CEE: the purpose; its importance, trends and unique challenges. Distance education can meet some of these challenges. Benefits and challenges of distance CEE are discussed along with the different types of distance CEE…

  8. Multipath study for a low altitude satellite utilizing a data relay satellite system

    NASA Technical Reports Server (NTRS)

    Eggert, D.

    1970-01-01

    Technical considerations associated with a low altitude satellite operating in conjuction with a data relay satellite system are reported. Emphasis was placed on the quantitative characterization of multipath phenomenon and determination of power received via both the direct and earth reflection paths. Attempts were made to develop a means for estimating the magnitude and nature of the reflected power.

  9. Broadband Microwave Wireless Power Transfer for Weak-Signal and Multipath Environments

    NASA Technical Reports Server (NTRS)

    Barton, Richard J.

    2014-01-01

    In this paper, we study the potential benefits of using relatively broadband wireless power transmission WPT strategies in both weak-signal and multipath environments where traditional narrowband strategies can be very inefficient. The paper is primarily a theoretical and analytical treatment of the problem that attempts to derive results that are widely applicable to many different WPT applications, including space solar power SSP.

  10. Multipath errors in range rate measurement by a TDRS/VHF - GRARR

    NASA Technical Reports Server (NTRS)

    Sohn, S. J.

    1970-01-01

    Range rate errors due to multipath reflection are calculated for a tracking and data relay satellite system using the VHF Goddard range and range rate (GRARR) system. At VHF the reflection is primarily specular, and the strength of the multipath relative to the direct path can be modeled in terms of the geometry and the surface characteristics, specifically the root-mean-square (rms) ocean wave height. The uplink and downlink multipath introduces phase jitter on the GRARR carrier and subcarrier. The derivation of these effects is reviewed leading to an expression for the rms range rate error. The derivation assumed the worst-case orbital configurations in which there was very little relative specular Doppler. This means that the specular multipath interference was not attenuated by the carrier and subcarrier PLL transfer functions. Curves of range rate error are presented as a function of grazing angle with wave height 0.3 to 0.7 meters and spacecraft altitude 100 to 700 miles as parameters.

  11. Multipath protection for data center services in OpenFlow-based software defined elastic optical networks

    NASA Astrophysics Data System (ADS)

    Yang, Hui; Cheng, Lei; Yuan, Jian; Zhang, Jie; Zhao, Yongli; Lee, Young

    2015-06-01

    With the rapid growth of data center services, the elastic optical network is a very promising networking architecture to interconnect data centers because it can elastically allocate spectrum tailored for various bandwidth requirements. In case of a link failure, to ensure a high-level quality of service (QoS) for user request after the failure becomes a research focus. In light of it, in this paper, we propose and experimentally demonstrate multipath protection for data center services in OpenFlow-based software defined elastic optical network testbed aiming at improving network reliability. We first propose an OpenFlow-based software defined elastic optical network architecture for data center service protection. Then, based on the proposed architecture, multipath protection scheme is figured based on the importance level of the service. To implement the proposed scheme in the architecture, OpenFlow protocol is extended to support multipath protection in elastic optical network. The performance of our proposed multipath protection scheme is evaluated by means of experiment on our OpenFlow-based testbed. The feasibility of our proposed scheme is also demonstrated in software defined elastic optical networks.

  12. Design of a robust underwater acoustic communication system over multipath fading channels

    NASA Astrophysics Data System (ADS)

    Kim, Jangeun; Shim, Taebo

    2012-11-01

    Due to the surface and bottom constraints of the underwater acoustic channel (UAC) in shallow waters, multipath fading occurs and causes degradation of the signal for the UAC system. To overcome these problems, a robust underwater acoustic communication system was designed over multipath fading channels by employing both decision feedback equalization with the RLS algorithm and convolutional coding with interleaving+shuffling block data sequence. The dual use of these two methods simultaneously can reduce the intersymbol interference (ISI) and the adjacent bit and burst errors. The system will retransmit the same signal if the system fails to estimate the channel due to severe multipath fading. To verify the performance of the system, the transmission of an image was tested using a 524,288bit gray-scaled image through the multipath fading channel. The test results showed that the number of bit errors was reduced from 86,824 to 5,106 when the reference SNR was 12 dB.

  13. Field Test of a Remote Multi-Path CLaDS Methane Sensor

    PubMed Central

    Plant, Genevieve; Nikodem, Michal; Mulhall, Phil; Varner, Ruth K.; Sonnenfroh, David; Wysocki, Gerard

    2015-01-01

    Existing technologies for quantifying methane emissions are often limited to single point sensors, making large area environmental observations challenging. We demonstrate the operation of a remote, multi-path system using Chirped Laser Dispersion Spectroscopy (CLaDS) for quantification of atmospheric methane concentrations over extended areas, a technology that shows potential for monitoring emissions from wetlands. PMID:26343670

  14. Spectrum-efficient multipath provisioning with content connectivity for the survivability of elastic optical datacenter networks

    NASA Astrophysics Data System (ADS)

    Gao, Tao; Li, Xin; Guo, Bingli; Yin, Shan; Li, Wenzhe; Huang, Shanguo

    2017-07-01

    Multipath provisioning is a survivable and resource efficient solution against increasing link failures caused by natural or man-made disasters in elastic optical datacenter networks (EODNs). Nevertheless, the conventional multipath provisioning scheme is designed only for connecting a specific node pair. Also, it is obvious that the number of node-disjoint paths between any two nodes is restricted to network connectivity, which has a fixed value for a given topology. Recently, the concept of content connectivity in EODNs has been proposed, which guarantees that a user can be served by any datacenter hosting the required content regardless of where it is located. From this new perspective, we propose a survivable multipath provisioning with content connectivity (MPCC) scheme, which is expected to improve the spectrum efficiency and the whole system survivability. We formulate the MPCC scheme with Integer Linear Program (ILP) in static traffic scenario and a heuristic approach is proposed for dynamic traffic scenario. Furthermore, to adapt MPCC to the variation of network state in dynamic traffic scenario, we propose a dynamic content placement (DCP) strategy in the MPCC scheme for detecting the variation of the distribution of user requests and adjusting the content location dynamically. Simulation results indicate that the MPCC scheme can reduce over 20% spectrum consumption than conventional multipath provisioning scheme in static traffic scenario. And in dynamic traffic scenario, the MPCC scheme can reduce over 20% spectrum consumption and over 50% blocking probability than conventional multipath provisioning scheme. Meanwhile, benefiting from the DCP strategy, the MPCC scheme has a good adaption to the variation of the distribution of user requests.

  15. Azimuth-dependent elevation threshold (ADET) masks to reduce multipath errors in ionospheric studies using GNSS

    NASA Astrophysics Data System (ADS)

    Atilaw, Tsige Y.; Cilliers, Pierre; Martinez, Peter

    2017-06-01

    Physical structures found in the vicinity of GNSS receivers can introduce multipath interference effects when a signal arrives at the receiver by different routes. Multipath effects are well recognized as one of the most significant sources of error that degrade the accuracy of GNSS signals for navigation and positioning applications. These effects also reduce the quality of GNSS data used for ionospheric studies. The principal cause of multipath effects is proximity of the antenna to reflecting structures and it is more pronounced when the signal comes from a satellite with low elevation. Typically, conservative fixed-elevation thresholds of 20-40° are used to filter out signals from low elevation angles, but this leads to the exclusion of a significant quantity of useable data. In this paper we present a series of azimuth-dependent elevation thresholds that were developed by characterizing the multipath environment of the GPS Ionospheric Scintillation and TEC (Total Electron Content) Monitor (GISTM) receivers installed by SANSA (South African National Space Agency) at Mauritius (20.14°S and 57°E), Marion Island (46.87 ° S and 37.86 ° E) and SANAE IV in Antarctica (71.73 ° S and 2.2 ° W). The threshold masks were developed from azimuth-elevation maps of the S4 index, σϕ index, the Code-Carrier Divergence Standard Deviation (CC-STDDEV) and the L1 Carrier-to-Noise Density (L1 CNo) from 1-min scintillation data taken over a period of 10-12 months at each location to identify signals that are distorted by multipath effects. Using the azimuth-dependent elevation threshold (ADET) mask typically gives 22-28% more useful data than using a fixed-elevation threshold at the sites studied in this paper.

  16. A study of GPS measurement errors due to noise and multipath interference for CGADS

    NASA Technical Reports Server (NTRS)

    Axelrad, Penina; MacDoran, Peter F.; Comp, Christopher J.

    1996-01-01

    This report describes a study performed by the Colorado Center for Astrodynamics Research (CCAR) on GPS measurement errors in the Codeless GPS Attitude Determination System (CGADS) due to noise and multipath interference. Preliminary simulation models fo the CGADS receiver and orbital multipath are described. The standard FFT algorithms for processing the codeless data is described and two alternative algorithms - an auto-regressive/least squares (AR-LS) method, and a combined adaptive notch filter/least squares (ANF-ALS) method, are also presented. Effects of system noise, quantization, baseband frequency selection, and Doppler rates on the accuracy of phase estimates with each of the processing methods are shown. Typical electrical phase errors for the AR-LS method are 0.2 degrees, compared to 0.3 and 0.5 degrees for the FFT and ANF-ALS algorithms, respectively. Doppler rate was found to have the largest effect on the performance.

  17. Multipath error in range rate measurement by PLL-transponder/GRARR/TDRS

    NASA Technical Reports Server (NTRS)

    Sohn, S. J.

    1970-01-01

    Range rate errors due to specular and diffuse multipath are calculated for a tracking and data relay satellite (TDRS) using an S band Goddard range and range rate (GRARR) system modified with a phase-locked loop transponder. Carrier signal processing in the coherent turn-around transponder and the GRARR reciever is taken into account. The root-mean-square (rms) range rate error was computed for the GRARR Doppler extractor and N-cycle count range rate measurement. Curves of worst-case range rate error are presented as a function of grazing angle at the reflection point. At very low grazing angles specular scattering predominates over diffuse scattering as expected, whereas for grazing angles greater than approximately 15 deg, the diffuse multipath predominates. The range rate errors at different low orbit altutudes peaked between 5 and 10 deg grazing angles.

  18. Multipath performance of a TDRS system employing wideband FM VHF signals

    NASA Technical Reports Server (NTRS)

    Sohn, S. J.; Ghais, A. F.

    1969-01-01

    An approximate theoretical analysis is presented for the effects of specular reflection multipath on the performance of a one-way tracking and data relay satellite-to-user link. The analysis pertains to the wideband FM system employing a sinusoidal subcarrier to achieve spectrum spreading. Bounds on multipath effects are derived for receivers with and without limiters and for data modulated on the carrier or the subcarrier. For data modulation, performance is evaluated in terms of an additive lowpass signal at the data detection filter. Doppler and range tracking performance is evaluated in terms of root-mean-square (RMS) error of carrier frequency in a carrier PLL and rms phase jitter in a subcarrier PLL.

  19. Acoustic multipath arrivals in the horizontal plane due to approaching nonlinear internal waves.

    PubMed

    Badiey, Mohsen; Katsnelson, Boris G; Lin, Ying-Tsong; Lynch, James F

    2011-04-01

    Simultaneous measurements of acoustic wave transmissions and a nonlinear internal wave packet approaching an along-shelf acoustic path during the Shallow Water 2006 experiment are reported. The incoming internal wave packet acts as a moving frontal layer reflecting (or refracting) sound in the horizontal plane. Received acoustic signals are filtered into acoustic normal mode arrivals. It is shown that a horizontal multipath interference is produced. This has previously been called a horizontal Lloyd's mirror. The interference between the direct path and the refracted path depends on the mode number and frequency of the acoustic signal. A mechanism for the multipath interference is shown. Preliminary modeling results of this dynamic interaction using vertical modes and horizontal parabolic equation models are in good agreement with the observed data.

  20. MLS Multipath Studies. Phase 3. Volume I. Overview and Propagation Model Validation/Refinement Studies.

    DTIC Science & Technology

    1979-04-25

    future landing guidance system . Thus, to aid in the system selection, optimization, and standardization process, there was need for realistic multipath...sponding system can be plotted. Plots of the means, standard deviations, and peak errors can be obtained if perturbation smoothing was used. The...Landing System , DLS," as proposed by the Federal Republic of Germany developed by Standard Elektrik Lorenz AG. and Siemens, AG. (Sept. 1975). 7

  1. The Multipath and Fading Profile of the High Latitude Meteor Burst Communication Channel.

    DTIC Science & Technology

    1986-10-01

    APPROVED: j~ ~ e. c ALLAN C. SCHELL Chief, Electromagnetic Sciences Division FOR THE COMMANDER: [ JOHN A. RITZ - Plans and Programs Division *, If your...multipath measurement VHF propagation / 19 ABSTRACT (Continue on reverse ,f necessary and identify by block number) ------ ------ .. tion High...latitude propagation phenomenon such as scatter from the aurora and sporadic-E propagation can alter the communication characteristics of the high latitude

  2. Time-Frequency Analysis of Multipath Doppler Signatures of Maneuvering Targets

    DTIC Science & Technology

    2012-03-01

    images . 14. ABSTRACT Multipath signals arise in many active sensing modalities, such as radar and sonar. Moving targets cause Doppler effects that...for the estimation of the target’s maneuvering behavior. REFERENCES [1] V. Chen and H. Ling, Time-Frequency Transforms for Radar Imaging and...analysis for SAR and ISAR imaging ,” in R. de Amicis, R. Stojanovic, and G. Conti (eds), GeoSpatial Visual Analytics, Springer, pp. 113-127, 2009. 3400

  3. Signal Processing Equipment and Techniques for Use in Measuring Ocean Acoustic Multipath Structures

    DTIC Science & Technology

    1983-12-01

    effort and look forward to participating in the Pacific Gyre work. Working with John Spiesberger has also been a rewarding experience. I look...Knox, ill K. Metzger, W. Munk, J. L. Spiesberger , R. Spindel, D. Webb, P. Worcester, and C. Wunch, "A demonstration of ocean acoustic tomography...California, 1982. 4. J. L. Spiesberger , R. Spindel, and K. Metzger, "Stability and Identification of Ocean Acoustic Multipaths," The Journal of

  4. Least-Squares Time-Delay Estimation for Transient Signals in a Multipath Environment

    DTIC Science & Technology

    1992-07-01

    characterized by a thin sediment In order to obtain unbiased estimates, we need to go layer over a highly reflecting basalt as shown in Fig. 6. The...surface and the basalt . The model Transient data were gathered in the Atlantic Ocean on a ocean impulse response is shown in Fig. 8 with the four paths...Senamato and D. G. Childers , "Signal resolution via digital inverse Multipath Environment." in Proc. Oceans 󈨞, Washington. DC, pp filtering." [EEE Trans

  5. Multipath propagation study for L-band, over-ocean, satellite-aircraft communication link

    NASA Technical Reports Server (NTRS)

    Deal, J. H.

    1972-01-01

    The results are presented of a study of multipath propagation between an aeronautical relay satellite in synchronous earth orbit and an aircraft flying over the ocean. An analytical model for the reflected power is developed and the results of a computer solution are compared with an approximate solution obtained through integration by the method of steepest descent. The computer solution is shown to differ considerably from the approximate solution. Both methods are compared with the limited experimental results available.

  6. Quasicontinuous-Variable Quantum Computation with Collective Spins in Multipath Interferometers

    NASA Astrophysics Data System (ADS)

    Opatrný, Tomáš

    2017-07-01

    Collective spins of large atomic samples trapped inside optical resonators can carry quantum information that can be processed in a way similar to quantum computation with continuous variables. It is shown here that by combining the resonators in multipath interferometers one can realize coupling between different samples, and that polynomial Hamiltonians can be constructed by repeated spin rotations and twisting induced by dispersive interaction of the atoms with light. Application can be expected in the efficient simulation of quantum systems.

  7. WEAMR — A Weighted Energy Aware Multipath Reliable Routing Mechanism for Hotline-Based WSNs

    PubMed Central

    Tufail, Ali; Qamar, Arslan; Khan, Adil Mehmood; Baig, Waleed Akram; Kim, Ki-Hyung

    2013-01-01

    Reliable source to sink communication is the most important factor for an efficient routing protocol especially in domains of military, healthcare and disaster recovery applications. We present weighted energy aware multipath reliable routing (WEAMR), a novel energy aware multipath routing protocol which utilizes hotline-assisted routing to meet such requirements for mission critical applications. The protocol reduces the number of average hops from source to destination and provides unmatched reliability as compared to well known reactive ad hoc protocols i.e., AODV and AOMDV. Our protocol makes efficient use of network paths based on weighted cost calculation and intelligently selects the best possible paths for data transmissions. The path cost calculation considers end to end number of hops, latency and minimum energy node value in the path. In case of path failure path recalculation is done efficiently with minimum latency and control packets overhead. Our evaluation shows that our proposal provides better end-to-end delivery with less routing overhead and higher packet delivery success ratio compared to AODV and AOMDV. The use of multipath also increases overall life time of WSN network using optimum energy available paths between sender and receiver in WDNs. PMID:23669714

  8. Fair resource allocation and stability for communication networks with multipath routing

    NASA Astrophysics Data System (ADS)

    Li, Shiyong; Sun, Wei; Hua, Changchun

    2014-11-01

    Multipath networks allow that each source-destination pair can have several different paths for data transmission, thus they improve the performance of increasingly bandwidth-hungry applications and well cater for traffic load balancing and bandwidth usage efficiency. This paper investigates fair resource allocation for users in multipath networks and formulates it as a multipath network utility maximisation problem with several fairness concepts. By applying the Lagrangian method, sub-problems for users and paths are derived from the resource allocation model and interpreted from an economic point of view. In order to solve the model, a novel rate-based flow control algorithm is proposed for achieving optimal resource allocation, which depends only on local information. In the presence of round-trip delays, sufficient conditions are obtained for local stability of the delayed algorithm. As for the end-to-end implementation in Internet, a window-based flow control mechanism is presented since it is more convenient to implement than rate-based flow control.

  9. Multipath Effects in Millimetre-Wave Wireless Communication using Orbital Angular Momentum Multiplexing.

    PubMed

    Yan, Yan; Li, Long; Xie, Guodong; Bao, Changjing; Liao, Peicheng; Huang, Hao; Ren, Yongxiong; Ahmed, Nisar; Zhao, Zhe; Wang, Zhe; Ashrafi, Nima; Ashrafi, Solyman; Talwar, Shilpa; Sajuyigbe, Soji; Tur, Moshe; Molisch, Andreas F; Willner, Alan E

    2016-09-23

    Electromagnetic waves carrying orbital angular momentum (OAM) have been used for mode division multiplexing in free-space communication systems to increase both the capacity and the spectral efficiency. In the case of conventional wireless communication links using non-OAM beams, multipath effects caused by beam spreading and reflection from the surrounding objects affect the system performance. This paper presents the results of analysis, simulations, and measurements of multipath effects in a millimetre-wave communication link using OAM multiplexing at 28 GHz. Multipath-induced intra- and inter-channel crosstalk, which are caused by specular reflection from a plane parallel to the propagation path, are analysed and measured. Both the simulation and the experimental results show that an OAM channel with a high OAM number ℓ tends to suffer from both strong intra-channel crosstalk and strong inter-channel crosstalk with other OAM channels. Results of the analysis show that this observation can be explained on the basis of both the properties of OAM beam divergence and the filtering effect at the receiver, which is associated with the spiral wavefront of OAM beams.

  10. Antifade sonar employs acoustic field diversity to recover signals from multipath fading

    SciTech Connect

    Lubman, D.

    1996-04-01

    Co-located pressure and particle motion (PM) hydrophones together with four-channel diversity combiners may be used to recover signals from multipath fading. Multipath fading is important in both shallow and deep water propagation and can be an important source of signal loss. The acoustic field diversity concept arises from the notion of conservation of signal energy and the observation that in rooms at least, the total acoustic energy density is the sum of potential energy (scalar field-sound pressure) and kinetic energy (vector field-sound PM) portions. One pressure hydrophone determines acoustic potential energy density at a point. In principle, three PM sensors (displacement, velocity, or acceleration) directed along orthogonal axes describe the kinetic energy density at a point. For a single plane wave, the time-averaged potential and kinetic field energies are identical everywhere. In multipath interference, however, potential and kinetic field energies at a point are partitioned unequally, depending mainly on relative signal phases. Thus, when pressure signals are in deep fade, abundant kinetic field signal energy may be available at that location. Performance benefits require a degree of uncorrelated fading between channels. The expectation of nearly uncorrelated fading is motivated from room theory. Performance benefits for sonar limited by independent Rayleigh fading are suggested by analogy to antifade radio. Average SNR can be improved by several decibels, holding time on target is multiplied manifold, and the bit error rate for data communication is reduced substantially. {copyright} {ital 1996 American Institute of Physics.}

  11. An Optimization Algorithm for Multipath Parallel Allocation for Service Resource in the Simulation Task Workflow

    PubMed Central

    Zhang, Hongjun; Zhang, Rui; Li, Yong; Zhang, Xuliang

    2014-01-01

    Service oriented modeling and simulation are hot issues in the field of modeling and simulation, and there is need to call service resources when simulation task workflow is running. How to optimize the service resource allocation to ensure that the task is complete effectively is an important issue in this area. In military modeling and simulation field, it is important to improve the probability of success and timeliness in simulation task workflow. Therefore, this paper proposes an optimization algorithm for multipath service resource parallel allocation, in which multipath service resource parallel allocation model is built and multiple chains coding scheme quantum optimization algorithm is used for optimization and solution. The multiple chains coding scheme quantum optimization algorithm is to extend parallel search space to improve search efficiency. Through the simulation experiment, this paper investigates the effect for the probability of success in simulation task workflow from different optimization algorithm, service allocation strategy, and path number, and the simulation result shows that the optimization algorithm for multipath service resource parallel allocation is an effective method to improve the probability of success and timeliness in simulation task workflow. PMID:24963506

  12. An optimization algorithm for multipath parallel allocation for service resource in the simulation task workflow.

    PubMed

    Wang, Zhiteng; Zhang, Hongjun; Zhang, Rui; Li, Yong; Zhang, Xuliang

    2014-01-01

    Service oriented modeling and simulation are hot issues in the field of modeling and simulation, and there is need to call service resources when simulation task workflow is running. How to optimize the service resource allocation to ensure that the task is complete effectively is an important issue in this area. In military modeling and simulation field, it is important to improve the probability of success and timeliness in simulation task workflow. Therefore, this paper proposes an optimization algorithm for multipath service resource parallel allocation, in which multipath service resource parallel allocation model is built and multiple chains coding scheme quantum optimization algorithm is used for optimization and solution. The multiple chains coding scheme quantum optimization algorithm is to extend parallel search space to improve search efficiency. Through the simulation experiment, this paper investigates the effect for the probability of success in simulation task workflow from different optimization algorithm, service allocation strategy, and path number, and the simulation result shows that the optimization algorithm for multipath service resource parallel allocation is an effective method to improve the probability of success and timeliness in simulation task workflow.

  13. A novel multi-path combination matching Michelson interferometer for straindeformation sensing

    NASA Astrophysics Data System (ADS)

    Jiang, Haili; Yuan, Yonggui; Yang, Jun; Yuan, Libo

    2010-11-01

    Based on low-coherence white light interferometric technology, a novel multi-path combination matching Michelson interferometer system has been proposed and demonstrated. The multi-path combination Michelson interferometer is configured by a series 2x2 fiber optic coupler connected each other. One end of the coupler array is connected with SLD light source in one port, the other port is linked with a photodiode detector. The other end of the 3dB fiber coupler array is with a coated reflective mirror in one port, the other port is terminated with a fiber collimator, and a reflective scanning mirror mounted on a translation stage and perpendicular to the fiber collimator. The scanning mirror is moving back and forth to match each optical path of the combination Michelson interferometer. In this multi-path combination Michelson interferometer, each fiber arm could be used as strain or deformation sensor. By using optical path tracking and recording technique, the quasi-distributed strain of each fiber arm can be calculated. The sensing system can be used to measure distribution strain or temperature. It has the potential in the applications of large scale smart structures health monitoring.

  14. Multipath Effects in Millimetre-Wave Wireless Communication using Orbital Angular Momentum Multiplexing

    PubMed Central

    Yan, Yan; Li, Long; Xie, Guodong; Bao, Changjing; Liao, Peicheng; Huang, Hao; Ren, Yongxiong; Ahmed, Nisar; Zhao, Zhe; Wang, Zhe; Ashrafi, Nima; Ashrafi, Solyman; Talwar, Shilpa; Sajuyigbe, Soji; Tur, Moshe; Molisch, Andreas F.; Willner, Alan E.

    2016-01-01

    Electromagnetic waves carrying orbital angular momentum (OAM) have been used for mode division multiplexing in free-space communication systems to increase both the capacity and the spectral efficiency. In the case of conventional wireless communication links using non-OAM beams, multipath effects caused by beam spreading and reflection from the surrounding objects affect the system performance. This paper presents the results of analysis, simulations, and measurements of multipath effects in a millimetre-wave communication link using OAM multiplexing at 28 GHz. Multipath-induced intra- and inter-channel crosstalk, which are caused by specular reflection from a plane parallel to the propagation path, are analysed and measured. Both the simulation and the experimental results show that an OAM channel with a high OAM number ℓ tends to suffer from both strong intra-channel crosstalk and strong inter-channel crosstalk with other OAM channels. Results of the analysis show that this observation can be explained on the basis of both the properties of OAM beam divergence and the filtering effect at the receiver, which is associated with the spiral wavefront of OAM beams. PMID:27658443

  15. Multipath Effects in Millimetre-Wave Wireless Communication using Orbital Angular Momentum Multiplexing

    NASA Astrophysics Data System (ADS)

    Yan, Yan; Li, Long; Xie, Guodong; Bao, Changjing; Liao, Peicheng; Huang, Hao; Ren, Yongxiong; Ahmed, Nisar; Zhao, Zhe; Wang, Zhe; Ashrafi, Nima; Ashrafi, Solyman; Talwar, Shilpa; Sajuyigbe, Soji; Tur, Moshe; Molisch, Andreas F.; Willner, Alan E.

    2016-09-01

    Electromagnetic waves carrying orbital angular momentum (OAM) have been used for mode division multiplexing in free-space communication systems to increase both the capacity and the spectral efficiency. In the case of conventional wireless communication links using non-OAM beams, multipath effects caused by beam spreading and reflection from the surrounding objects affect the system performance. This paper presents the results of analysis, simulations, and measurements of multipath effects in a millimetre-wave communication link using OAM multiplexing at 28 GHz. Multipath-induced intra- and inter-channel crosstalk, which are caused by specular reflection from a plane parallel to the propagation path, are analysed and measured. Both the simulation and the experimental results show that an OAM channel with a high OAM number ℓ tends to suffer from both strong intra-channel crosstalk and strong inter-channel crosstalk with other OAM channels. Results of the analysis show that this observation can be explained on the basis of both the properties of OAM beam divergence and the filtering effect at the receiver, which is associated with the spiral wavefront of OAM beams.

  16. [Distance Education.

    ERIC Educational Resources Information Center

    Wallace, Teri, Ed.; Weatherman, Dick, Ed.

    1995-01-01

    This newsletter theme issue on distance education serving individuals with disabilities considers historical developments, technology, staff training strategies, and staff training materials. It is noted that improving access to training for staff members can improve the quality of services for individuals with disabilities. The following articles…

  17. Customer premises services market demand assessment 1980 - 2000: Volume 2

    NASA Technical Reports Server (NTRS)

    Gamble, R. B.; Saporta, L.; Heidenrich, G. A.

    1983-01-01

    Potential customer premises service (CPS), telecommunication services, potential CPS user classes, a primary research survey, comparative economics, market demand forcasts, distance distribution of traffic, segmentation of market demand, and a nationwide traffic distribution model are discussed.

  18. A Distance Learning Case Study.

    ERIC Educational Resources Information Center

    Boord, Patricia M.

    1998-01-01

    To address diminishing resources and increased training demands, the Operational Training Unit (OTU) of the Federal Bureau of Investigation has saved almost $2 million by developing a distance education course to replace one full week of training at the FBI Academy. Discussion focuses on major issues faced by OTU in designing/delivering this…

  19. Node localization via analyzing multi-path signals in ultrasonic sensor networks

    NASA Astrophysics Data System (ADS)

    Tomlinson, W. J.; Dong, B.; Lorenz, S.; Biswas, S.

    2014-05-01

    This paper proposes a novel signal analysis based node localization strategy for sensor networks used in structural health monitoring (SHM) applications. The key idea is to analyze location-dependent multipath signal patterns in inter-node ultrasonic signals, and use machine-learning mechanisms to detect such patterns for accurate node localization on metal substrates on target structures. Majority of the traditional mechanisms rely on radio based Time Delay of Arrival (TDOA), coupled with multilateration, and multiple reference nodes. The proposed mechanism attempts to solve the localization problem in an ultrasonic sensor network (USN), avoiding the use of multiple reference beacon nodes. Instead, it relies on signal analysis and multipath signature classification from a single reference node that periodically transmits ultrasonic localization beacons. The approach relies on a key observation that the ultrasonic signal received at any point on the structure from the reference node, is a superposition of the signals received on the direct path and through all possible multi-paths. It is hypothesized that if the location of the reference node and the substrate properties are known a-priori, it should be possible to train a receiver (source node), to identify its own location by observing the exact signature of the received signal. To validate this hypothesis, steps were taken to develop a TI MSP-430 based module for implementing a run-time system from a proposed architecture. Through extensive experimentation within an USN on the 2024 Aluminum substrate, it was demonstrated that localization accuracies up to 92% were achieved in the presence of varying spatial resolutions.

  20. Incorporation of GNSS multipath to improve autonomous rendezvous, docking and proximity operations in space

    NASA Astrophysics Data System (ADS)

    Ashman, Benjamin W.

    Automated rendezvous and docking (AR&D;) operations are important for many future space missions, such as the resupply of space stations, repair and refueling of large satellites, and active removal of orbital debris. These operations depend critically on accurate, real-time knowledge of the relative position and velocity between two space vehicles. Unfortunately, Global Navigation Satellite System (GNSS) capabilities remain severely limited in close proximity to large space structures due to significant multipath effects and signal blockage. Although GNSS is used for the initial stages of approach, other instruments such as laser, radar and vision-based systems, are required to augment GNSS during AR&D; over the last few hundred meters. This dissertation evaluates the feasibility of GNSS multipath-based relative space navigation. Methods for separating and interpreting reflected signals are demonstrated using GNSS data collected during Hubble Servicing Mission 4 (HSM4), a model of the mission geometry, electromagnetic (EM) ray tracing, and a custom GNSS software receiver. EM ray tracing is used to show that a number of signals sufficient for ranging are reflected by the Hubble Space Telescope (HST) during HSM4, and the properties of these reflections are used to generate simulated GNSS data. The impact of reflected signals on code correlation shape, code tracking error, and pseudorange measurement is demonstrated using the simulated and experimental data. Relative navigation is demonstrated using simulated reflected signal measurements and the dependence of relative navigation on the reflecting object's scattering properties is illustrated. From the tracking of data from two oppositely polarized antennas, both simulated and experimental, it is determined that multipath measurements are limited by system properties such as antenna polarization quality and front end bandwidth. Design considerations involved in optimizing a receiver to measure reflected signals are

  1. PARALIND-based blind joint angle and delay estimation for multipath signals with uniform linear array

    NASA Astrophysics Data System (ADS)

    Liu, Xu; Guang, Liang; Yang, Longxiang; Zhu, Hongbo

    2012-12-01

    A novel joint angle and delay estimation (JADE) algorithm for multipath signals, based on the PARAllel profiles with LINear Dependencies (PARALIND) model, is proposed. Capitalizing on the structure property of Vandermonde matrices, PARALIND model is proved to be unique. Angle and delay of multiple rays of sources can be estimated by PARALIND decomposition and an ESPRIT-like shift-invariance technique. Simulation results show that the proposed algorithm outperforms the traditional JADE algorithm. It can automatically distinguish the estimated parameters between sources, and still be available when the number of rays is larger than the number of receiving antennae.

  2. Multi-path light extinction approach for high efficiency filtered oil particle measurement

    NASA Astrophysics Data System (ADS)

    Pengfei, Yin; Jun, Chen; Huinan, Yang; Lili, Liu; Xiaoshu, Cai

    2014-04-01

    This work present a multi-pathlight extinction approach to determine the oil mist filter efficiency based on measuring the concentration and size distribution of oil particles. Light extinction spectrum(LES) technique was used to retrieve the oil particle size distribution and concentration. The multi-path measuring cell was designed to measure low concentration and fine particles after filtering. The path-length of the measuring cell calibrated as 200 cm. The results of oil particle size with oil mist filtering were obtained as D32 = 0.9μm. Cv=1.6×10-8.

  3. Discrete estimation of continuous angle-modulated signals over multipath channels for aeronautical communication

    NASA Technical Reports Server (NTRS)

    Takhar, G. S.; Gupta, S. C.

    1976-01-01

    The multipath channel for communication between an aerospace vehicle and a ground terminal is modeled by a multiplicative first-order Markov process. The multiplicative process is treated as a component of the message model and the discrete-time demodulation algorithms using the extended Kalman nonlinear estimation technique are developed for continuous-time angle-modulated signals. The equivalent baseband form of the demodulator structure is derived. Two examples of the message process are discussed for an FM system. The simulation results are presented for various values of the bandwidth expansion ratio and the additive SNR. The performance of the baseband algorithms is discussed.

  4. L-Band DME Multipath Environment in the Microwave Landing System (MLS) Approach and Landing Region.

    DTIC Science & Technology

    1982-04-13

    present hope is that an L-band DME which is fully compatible with current VOR/DME navigation and/or RNAV requirements can provide range guidance which is...adequate for all the MLS needs (e.g., RNAV to MLS transition, complex terminal maneuvers for curved approach, flare initiation and the flare maneu...NTERROGATOR ANTENA 4r 1 X1ro 2 ANTENNA I - T V1- - - - - - - - - h RUNWAYI’ M~ Fig 3-. Cnfi~raionused to determine multipath parameters due to scatterinlg

  5. A study of land mobile satellite service multipath effects using SATLAB software

    NASA Technical Reports Server (NTRS)

    Campbell, Richard L.

    1991-01-01

    A software package is proposed that uses the known properties of signals received in multipath environments along with the mathematical relationships between signal characteristics to explore the effects of antenna pattern, vehicle velocity, shadowing of the direct wave, distributions of scatters around the moving vehicle and levels of scattered signals on the received complex envelope, fade rates and fade duration, Doppler spectrum, signal arrival angle spectrum, and spatial correlation. The data base may be either actual measured received signals entered as ASCII flat files or data synthesized using a built in model. An example illustrates the effect of using different antennas to receive signals in the same environment.

  6. A spread spectrum system with frequency hopping and sequentially balanced modulation. II - Operation in jamming and multipath

    NASA Astrophysics Data System (ADS)

    Mathis, R. F.; Pawula, R. F.

    1980-10-01

    The performance of a spread spectrum system which incorporates frequency hopping, sequentially balanced modulation, phase-comparison tone ranging, and pseudoorthogonal block coding of BPSK data with maximum likelihood of soft decision decoding, is evaluated in jamming environments and multipath. The jamming models considered include partial-band noise jamming, comb-type partial-band noise jamming, multitone jamming, and comb-type multitone jamming. Specular multipath with broad-band noise are shown to be the most serious form of interference. Bit-error probability and ranging accuracy curves are presented.

  7. Rural electric demand research

    SciTech Connect

    Stetson, L.E.; Stark, G.L.

    1985-09-01

    In cooperative research with rural power suppliers in Nebraska, 35 recording demand meters were installed. The demand study was started in December of 1980 and concluded in March of 1983. Data collection in Nebraska was concentrated in a five-county area in eastcentral Nebraska. Customers were sampled based on a stratified randomized design. Electrical demands were recorded for 5-min intervals. Coincidental peak demands for 60-min intervals were determined for selected peak power use days in 1981 and 1982. In addition, 15-min coincidental demands showing maximum average and minimum demands for each month for the two-year study are presented. Demands predicted by the Rural Electrification Administration demand tables were generally lower than the measured demands while demands predicted by linear regression analysis were higher than the measured demands. Measured coincidental peak demands per customer for the total of all stratified groups ranged from 5.7 to 8.6 kW.

  8. AUV Positioning Method Based on Tightly Coupled SINS/LBL for Underwater Acoustic Multipath Propagation.

    PubMed

    Zhang, Tao; Shi, Hongfei; Chen, Liping; Li, Yao; Tong, Jinwu

    2016-03-11

    This paper researches an AUV (Autonomous Underwater Vehicle) positioning method based on SINS (Strapdown Inertial Navigation System)/LBL (Long Base Line) tightly coupled algorithm. This algorithm mainly includes SINS-assisted searching method of optimum slant-range of underwater acoustic propagation multipath, SINS/LBL tightly coupled model and multi-sensor information fusion algorithm. Fuzzy correlation peak problem of underwater LBL acoustic propagation multipath could be solved based on SINS positional information, thus improving LBL positional accuracy. Moreover, introduction of SINS-centered LBL locating information could compensate accumulative AUV position error effectively and regularly. Compared to loosely coupled algorithm, this tightly coupled algorithm can still provide accurate location information when there are fewer than four available hydrophones (or within the signal receiving range). Therefore, effective positional calibration area of tightly coupled system based on LBL array is wider and has higher reliability and fault tolerance than loosely coupled. It is more applicable to AUV positioning based on SINS/LBL.

  9. Energy-Aware Multipath Routing Scheme Based on Particle Swarm Optimization in Mobile Ad Hoc Networks

    PubMed Central

    Robinson, Y. Harold; Rajaram, M.

    2015-01-01

    Mobile ad hoc network (MANET) is a collection of autonomous mobile nodes forming an ad hoc network without fixed infrastructure. Dynamic topology property of MANET may degrade the performance of the network. However, multipath selection is a great challenging task to improve the network lifetime. We proposed an energy-aware multipath routing scheme based on particle swarm optimization (EMPSO) that uses continuous time recurrent neural network (CTRNN) to solve optimization problems. CTRNN finds the optimal loop-free paths to solve link disjoint paths in a MANET. The CTRNN is used as an optimum path selection technique that produces a set of optimal paths between source and destination. In CTRNN, particle swarm optimization (PSO) method is primly used for training the RNN. The proposed scheme uses the reliability measures such as transmission cost, energy factor, and the optimal traffic ratio between source and destination to increase routing performance. In this scheme, optimal loop-free paths can be found using PSO to seek better link quality nodes in route discovery phase. PSO optimizes a problem by iteratively trying to get a better solution with regard to a measure of quality. The proposed scheme discovers multiple loop-free paths by using PSO technique. PMID:26819966

  10. Advanced Launch System Multi-Path Redundant Avionics Architecture Analysis and Characterization

    NASA Technical Reports Server (NTRS)

    Baker, Robert L.

    1993-01-01

    The objective of the Multi-Path Redundant Avionics Suite (MPRAS) program is the development of a set of avionic architectural modules which will be applicable to the family of launch vehicles required to support the Advanced Launch System (ALS). To enable ALS cost/performance requirements to be met, the MPRAS must support autonomy, maintenance, and testability capabilities which exceed those present in conventional launch vehicles. The multi-path redundant or fault tolerance characteristics of the MPRAS are necessary to offset a reduction in avionics reliability due to the increased complexity needed to support these new cost reduction and performance capabilities and to meet avionics reliability requirements which will provide cost-effective reductions in overall ALS recurring costs. A complex, real-time distributed computing system is needed to meet the ALS avionics system requirements. General Dynamics, Boeing Aerospace, and C.S. Draper Laboratory have proposed system architectures as candidates for the ALS MPRAS. The purpose of this document is to report the results of independent performance and reliability characterization and assessment analyses of each proposed candidate architecture and qualitative assessments of testability, maintainability, and fault tolerance mechanisms. These independent analyses were conducted as part of the MPRAS Part 2 program and were carried under NASA Langley Research Contract NAS1-17964, Task Assignment 28.

  11. Combination of optical and electronic logic gates for error correction in multipath differential demodulation.

    PubMed

    Lize, Yannick K; Christen, Louis; Nazarathy, Moshe; Nuccio, Scott; Wu, Xiaoxia; Willner, Alan E; Kashyap, Raman

    2007-05-28

    We present an optical multipath error correction technique for differentially encoded modulation formats such as differential-phase-shift-keying (DPSK) and differential polarization shift keying (DPolSK) for fiber-based and free-space communication. This multipath error correction method combines optical and electronic logic gates. The scheme can easily be implemented using commercially available interferometers and high speed logic gates and does not require any data overhead therefore does not affect the effective bandwidth of the transmitted data. It is not merely compatible but also complementary to error correction codes commonly used in optical transmission systems such as forward-error-correction (FEC). The technique consists of separating the demodulation at the receiver in multiple paths. Each path consists of a Mach-Zehnder interferometer with a different integer bit delay used in each path. Some basic logic operations follow and the three paths are compared using a simple majority vote algorithm. Experimental results show that the scheme improves receiver sensitivity by 1.5 dB at BER of 10(-3),in back-to-back configuration. Numerical results indicate a 1.6 dB improvement in the presence of Chromatic Dispersion for a 25% increase in tolerance for a 3dB penalty from +/-1220 ps/nm to +/-1520 ps/nm. and a 0.35 dB improvement for back-to-back operation.

  12. Multi-GNSS and Multi-frequency SNR Multipath Reflectometry of Snow Depth

    NASA Astrophysics Data System (ADS)

    Tabibi, S.; Geremia-Nievinski, F.; van Dam, T. M.

    2015-12-01

    Global Navigation Satellite System multipath reflectometry (GNSS-MR) uses ground-based signals of opportunity to retrieve snow depth at an intermediate space scale. This technique is based on the signal-to-noise ratio (SNR) of the simultaneously received direct (line-of-sight) and coherently ground reflected signals. In this contribution, forward and inverse modeling of SNR observations is presented for GLONASS-MR, extending GPS-MR to multiple GNSS. The coupling of the surface and antenna responses from short-delay near-grazing incidence multipath from CDMA and FDMA satellite navigation systems are simulated using an electromagnetic forward model. The inverse model is used to estimate parameter corrections responsible for observation residuals to estimate snow depth. The correlation between snow depth retrievals using GPS L2C signal and GLONASS R2-C/A signal is excellent, with r2 value of 0.990. In a related approach, dual-frequency SNR-based GNSS-MR, which is based on linear combination of SNR observables, is used to estimate snow depth. This ionospheric delay free method synthesizes longer carrier wavelengths ("widelaning" or delta-k) to isolate the direct power contribution in environmental retrievals.

  13. Multipath colourimetric assay for copper(II) ions utilizing MarR functionalized gold nanoparticles

    PubMed Central

    Wang, Yulong; Wang, Limin; Su, Zhenhe; Xue, Juanjuan; Dong, Jinbo; Zhang, Cunzheng; Hua, Xiude; Wang, Minghua; Liu, Fengquan

    2017-01-01

    We use the multiple antibiotic resistance regulator (MarR), as a highly selective biorecognition elements in a multipath colourimetric sensing strategy for the fast detection of Cu2+ in water samples. The colourimetric assay is based on the aggregation of MarR-coated gold nanoparticles in the presence of Cu2+ ions, which induces a red-to-purple colour change of the solution. The colour variation in the gold nanoparticle aggregation process can be used for qualitative and quantitative detection of Cu2+ by the naked eye, and with UV–vis and smartphone-based approaches. The three analysis techniques used in the multipath colourimetric assay complement each other and provide greater flexibility for differing requirements and conditions, making the assay highly applicable for Cu2+ detection. Under optimal conditions, the Cu2+ concentration was quantified in less than 5 min with limits of detection for the naked eye, UV–vis and smartphone-based approaches of 1 μM, 405 nM and 61 nM, respectively. Moreover, the sensing system exhibited excellent selectivity and practical application for Cu2+ detection in real water samples. Thus, our strategy has great potential for application in on-site monitoring of Cu2+, and the unique response of MarR towards copper ions may provide a new approach to Cu2+ sensing. PMID:28155905

  14. Multipath colourimetric assay for copper(II) ions utilizing MarR functionalized gold nanoparticles

    NASA Astrophysics Data System (ADS)

    Wang, Yulong; Wang, Limin; Su, Zhenhe; Xue, Juanjuan; Dong, Jinbo; Zhang, Cunzheng; Hua, Xiude; Wang, Minghua; Liu, Fengquan

    2017-02-01

    We use the multiple antibiotic resistance regulator (MarR), as a highly selective biorecognition elements in a multipath colourimetric sensing strategy for the fast detection of Cu2+ in water samples. The colourimetric assay is based on the aggregation of MarR-coated gold nanoparticles in the presence of Cu2+ ions, which induces a red-to-purple colour change of the solution. The colour variation in the gold nanoparticle aggregation process can be used for qualitative and quantitative detection of Cu2+ by the naked eye, and with UV-vis and smartphone-based approaches. The three analysis techniques used in the multipath colourimetric assay complement each other and provide greater flexibility for differing requirements and conditions, making the assay highly applicable for Cu2+ detection. Under optimal conditions, the Cu2+ concentration was quantified in less than 5 min with limits of detection for the naked eye, UV-vis and smartphone-based approaches of 1 μM, 405 nM and 61 nM, respectively. Moreover, the sensing system exhibited excellent selectivity and practical application for Cu2+ detection in real water samples. Thus, our strategy has great potential for application in on-site monitoring of Cu2+, and the unique response of MarR towards copper ions may provide a new approach to Cu2+ sensing.

  15. Performance of filter bank-based spreading codes for multipath/multiuser interference

    NASA Astrophysics Data System (ADS)

    Hetling, Kenneth J.; Saulnier, Gary J.; Das, Pankaj K.

    1996-03-01

    Spread spectrum communications is a technique in which the transmission bandwidth is much larger than that normally required to transmit at the given data rate. The use of this excess bandwidth provides the system with advantages in the areas of anti-jam communications, high resolution ranging, resistance to multipath fading, and low probability of intercept/detection of the transmissions. The traditional spreading sequences used in spread spectrum communications are the maximal length sequences, due to their good randomness properties as well as their ease of generation. Recently a new class of spreading codes has been developed based upon the time-frequency duality of multirate filter bank structures. Unlike the maximal length sequences, these new codes are not limited to being binary valued. Instead, the elements of the sequences are determined by an optimization process which emphasizes certain desirable code properties. In this paper, spreading codes based upon multirate filter banks are developed for use in a channel characterized by both multiuser and multipath interference. Several sets of codes are designed for various channel conditions and analytical bit error rate results are generated. These results are then compared to those for conventional maximal length sequences.

  16. Multipath Effects on High-Frequency Coherent Acoustic Communications in Shallow Water

    NASA Astrophysics Data System (ADS)

    Son, Su-Uk; Kim, Hyeonsu; Joo, Jongmin; Choi, Jee Woong

    2013-07-01

    Shallow-water acoustic communication channel, referred to as a multipath-limited channel, produces inter-symbol interference that poses a significant obstacle to reliable communication. Accordingly, signal-to-multipath ratio (SMR), rather than signal-to-noise ratio (SNR), becomes an important factor affecting communication performance. However, it is difficult to estimate SMR from measured communication data, especially at higher frequency (>10 kHz) because many arrivals scattered from rough ocean boundaries produce a significant intrapath time spreading, which acts as random noise in communication. In this paper, the energy fraction of the channel impulse response existing in one symbol duration is proposed as a parameter for estimating the quality of shallow-water communication channels. This parameter is compared with the bit-error-rate performance for data acquired in shallow water off the south coast of Korea, where the water depth is 45 m and the bottom consists of sandy clay sediment. The results imply that the energy fraction in one symbol duration may be used as a parameter for describing shallow-water communication channels and applied to the quick decision of a symbol or bit rate in a shallow-water field for reliable underwater communication.

  17. Multipath Separation-Direction of Arrival (MS-DOA) with Genetic Search Algorithm for HF channels

    NASA Astrophysics Data System (ADS)

    Arikan, Feza; Koroglu, Ozan; Fidan, Serdar; Arikan, Orhan; Guldogan, Mehmet B.

    2009-09-01

    Direction-of-Arrival (DOA) defines the estimation of arrival angles of an electromagnetic wave impinging on a set of sensors. For dispersive and time-varying HF channels, where the propagating wave also suffers from the multipath phenomena, estimation of DOA is a very challenging problem. Multipath Separation-Direction of Arrival (MS-DOA), that is developed to estimate both the arrival angles in elevation and azimuth and the incoming signals at the output of the reference antenna with very high accuracy, proves itself as a strong alternative in DOA estimation for HF channels. In MS-DOA, a linear system of equations is formed using the coefficients of the basis vector for the array output vector, the incoming signal vector and the array manifold. The angles of arrival in elevation and azimuth are obtained as the maximizers of the sum of the magnitude squares of the projection of the signal coefficients on the column space of the array manifold. In this study, alternative Genetic Search Algorithms (GA) for the maximizers of the projection sum are investigated using simulated and experimental ionospheric channel data. It is observed that GA combined with MS-DOA is a powerful alternative in online DOA estimation and can be further developed according to the channel characteristics of a specific HF link.

  18. Joint Symbol Timing and CFO Estimation for OFDM/OQAM Systems in Multipath Channels

    NASA Astrophysics Data System (ADS)

    Fusco, Tilde; Petrella, Angelo; Tanda, Mario

    2009-12-01

    The problem of data-aided synchronization for orthogonal frequency division multiplexing (OFDM) systems based on offset quadrature amplitude modulation (OQAM) in multipath channels is considered. In particular, the joint maximum-likelihood (ML) estimator for carrier-frequency offset (CFO), amplitudes, phases, and delays, exploiting a short known preamble, is derived. The ML estimators for phases and amplitudes are in closed form. Moreover, under the assumption that the CFO is sufficiently small, a closed form approximate ML (AML) CFO estimator is obtained. By exploiting the obtained closed form solutions a cost function whose peaks provide an estimate of the delays is derived. In particular, the symbol timing (i.e., the delay of the first multipath component) is obtained by considering the smallest estimated delay. The performance of the proposed joint AML estimator is assessed via computer simulations and compared with that achieved by the joint AML estimator designed for AWGN channel and that achieved by a previously derived joint estimator for OFDM systems.

  19. Nonlinear elastic multi-path reciprocal method for damage localisation in composite materials.

    PubMed

    Boccardi, S; Callá, D B; Ciampa, F; Meo, M

    2017-09-05

    Nonlinear ultrasonic techniques rely on the measurement of nonlinear elastic effects caused by the interaction of ultrasonic waves with the material damage, and have shown high sensitivity to detect micro-cracks and defects in the early stages. This paper presents a nonlinear ultrasonic technique, here named nonlinear elastic multi-path reciprocal method, for the identification and localisation of micro-damage in composite laminates. In the proposed methodology, a sparse array of surface bonded ultrasonic transducers is used to measure the second harmonic elastic response associated with the material flaw. A reciprocal relationship of nonlinear elastic parameters evaluated from multiple transmitter-receiver pairs is then applied to locate the micro-damage. Experimental results on a damaged composite panel revealed that an accurate damage localisation was obtained using the normalised second order nonlinear parameter with a high signal-to-noise-ratio (∼11.2dB), whilst the use of bicoherence coefficient provided high localisation accuracy with a lower signal-to-noise-ratio (∼1.8dB). The maximum error between the calculated and the real damage location was nearly 13mm. Unlike traditional linear ultrasonic techniques, the proposed nonlinear elastic multi-path reciprocal method allows detecting material damage on composite materials without a priori knowledge of the ultrasonic wave velocity nor a baseline with the undamaged component. Copyright © 2017. Published by Elsevier B.V.

  20. Challenges Encountered by a Distance Learning Organisation

    ERIC Educational Resources Information Center

    Malik, Sangeeta

    2012-01-01

    Distance learning as the name indicates is a learning, learner gets from distant places. In this learning system, learner and educators are separated by space & time. Lots of distance learning organizations are spreading to meet the increased demand of current & future needs of adult education. The rapid spread of these organizations doesn't mean…

  1. Student and Faculty Issues in Distance Education.

    ERIC Educational Resources Information Center

    Fender, David L.

    Occupational safety and health faculty and occupational safety and health professionals (i.e., the potential audience for graduate level distance education programs) were surveyed to determine the considerations for a distance education-based graduate occupational safety and health program. Findings are reported related to the demand for distance…

  2. Providing Formative Assessment to Students Solving Multipath Engineering Problems with Complex Arrangements of Interacting Parts: An Intelligent Tutor Approach

    ERIC Educational Resources Information Center

    Steif, Paul S.; Fu, Luoting; Kara, Levent Burak

    2016-01-01

    Problems faced by engineering students involve multiple pathways to solution. Students rarely receive effective formative feedback on handwritten homework. This paper examines the potential for computer-based formative assessment of student solutions to multipath engineering problems. In particular, an intelligent tutor approach is adopted and…

  3. Providing Formative Assessment to Students Solving Multipath Engineering Problems with Complex Arrangements of Interacting Parts: An Intelligent Tutor Approach

    ERIC Educational Resources Information Center

    Steif, Paul S.; Fu, Luoting; Kara, Levent Burak

    2016-01-01

    Problems faced by engineering students involve multiple pathways to solution. Students rarely receive effective formative feedback on handwritten homework. This paper examines the potential for computer-based formative assessment of student solutions to multipath engineering problems. In particular, an intelligent tutor approach is adopted and…

  4. Positional demands of professional rugby.

    PubMed

    Lindsay, Angus; Draper, Nick; Lewis, John; Gieseg, Steven P; Gill, Nicholas

    2015-01-01

    Rugby union is a physically intense intermittent sport coupled with high force collisions. Each position within a team has specific requirements which are typically based on speed, size and skill. The aim of this study was to investigate the contemporary demands of each position and whether they can explain changes in psychophysiological stress. Urine and saliva samples were collected before and after five selected Super 15 rugby games from 37 players. Total neopterin (NP), cortisol and immunoglobulin A were analysed by SCX-high performance liquid chromatography and enzyme linked immunosorbent assay. Global positioning system software provided distance data, while live video analysis provided impact data. All contemporary demands were analysed as events per minute of game time. Forwards were involved in more total impacts, tackles and rucks compared to backs (p < 0.001), while backs were involved in more ball carries and covered more total distance and distance at high speed per minute of game time (p < 0.01). Loose forwards, inside and outside backs covered significantly more distance at high speed (p < 0.01), while there was a negligible difference with number of impacts between the forward positions. There was also minimal difference between positions in the percentage change in NP, cortisol and sIgA. The results indicate distance covered and number of impacts per minute of game time is position-dependent whereas changes in psychophysiological stress are independent. This information can be used to adapt training and recovery interventions to better prepare each position based on the physical requirements of the game.

  5. Multipathing within LLSVPs in models of thermal and thermochemical mantle convection

    NASA Astrophysics Data System (ADS)

    Nowacki, A.; Walpole, J.; Davies, R.; Heck, H. V.; Wookey, J. M.; Davies, H.

    2016-12-01

    Two regions at the base of Earth's mantle (the Large Low Shear Velocity Provinces, or LLSVPs) are seismically slow and comprise a large proportion of the lowermost few hundred km of the mantle. It is debated whether these regions might be the remnants of a basal magma ocean or other Earth-forming processes, in which case the regions may provide information about Earth's history. However, it is still uncertain what the current physical properties of the LLSVPs are. Is the cause of the LLSVPs' seismic signature primarily thermal or chemical? One argument for a largely chemical origin is that seismically `sharp sides' can be inferred from waves which exhibit `multipathing' (the arrival of more than one wave due to refraction) when traversing these regions. This implies strong gradients in velocity which are seemingly unlikely to be sustained in a purely thermal situation, where diffusive processes and convection would act to equilibrate temperatures over short length scales (of a few tens of km). We address this by simulating mantle convection with Earth-like parameters in a 3D spherical geometry for two end-member cases: an isochemical (T) mantle, and a thermochemical (TC) case where a global, dense layer exists initially at the base of the mantle. We impose 200 Ma of plate motion history, track the location of the dense material, and convert both models to seismic velocity using a thermodynamical database (Stixrude & Lithgow-Bertelloni, GJI, 2005, 2011). Previous work has shown the cases are not easily distinguishable tomographically, so we seek to reproduce observations of `sharp sides' by creating finite-frequency synthetics at relatively high frequencies ( 0.2 Hz), using the spectral element method. We find that in a number of regions in both T and TC models, we observe multipathing in Sdiff waves which traverse the LLSVPs. Events beneath Tonga recorded in southern Africa yield strongly azimuth-dependent arrival times, as expected by features in the convection

  6. An Energy-Efficient and Robust Multipath Routing Protocol for Cognitive Radio Ad Hoc Networks.

    PubMed

    Singh, Kishor; Moh, Sangman

    2017-09-04

    Routing in cognitive radio ad hoc networks (CRAHNs) is a daunting task owing to dynamic topology, intermittent connectivity, spectrum heterogeneity, and energy constraints. Other prominent aspects such as channel stability, path reliability, and route discovery frequency should also be exploited. Several routing protocols have been proposed for CRAHNs in the literature. By stressing on one of the aspects more than any other, however, they do not satisfy all requirements of throughput, energy efficiency, and robustness. In this paper, we propose an energy-efficient and robust multipath routing (ERMR) protocol for CRAHNs by considering all prominent aspects including residual energy and channel stability in design. Even when the current routing path fails, the alternative routing path is immediately utilized. In establishing primary and alternative routing paths, both residual energy and channel stability are exploited simultaneously. Our simulation study shows that the proposed ERMR outperforms the conventional protocol in terms of network throughput, packet delivery ratio, energy consumption, and end-to-end delay.

  7. Multi-path transportation futures study : vehicle characterization and scenario analyses.

    SciTech Connect

    Plotkin, S. E.; Singh, M. K.; Energy Systems; TA Engineering; ORNL

    2009-12-03

    Projecting the future role of advanced drivetrains and fuels in the light vehicle market is inherently difficult, given the uncertainty (and likely volatility) of future oil prices, inadequate understanding of likely consumer response to new technologies, the relative infancy of several important new technologies with inevitable future changes in their performance and costs, and the importance - and uncertainty - of future government marketplace interventions (e.g., new regulatory standards or vehicle purchase incentives). This Multi-Path Transportation Futures (MP) Study has attempted to improve our understanding of this future role by examining several scenarios of vehicle costs, fuel prices, government subsidies, and other key factors. These are projections, not forecasts, in that they try to answer a series of 'what if' questions without assigning probabilities to most of the basic assumptions.

  8. An Improved Proportionate Normalized Least-Mean-Square Algorithm for Broadband Multipath Channel Estimation

    PubMed Central

    2014-01-01

    To make use of the sparsity property of broadband multipath wireless communication channels, we mathematically propose an lp-norm-constrained proportionate normalized least-mean-square (LP-PNLMS) sparse channel estimation algorithm. A general lp-norm is weighted by the gain matrix and is incorporated into the cost function of the proportionate normalized least-mean-square (PNLMS) algorithm. This integration is equivalent to adding a zero attractor to the iterations, by which the convergence speed and steady-state performance of the inactive taps are significantly improved. Our simulation results demonstrate that the proposed algorithm can effectively improve the estimation performance of the PNLMS-based algorithm for sparse channel estimation applications. PMID:24782663

  9. The relation between the waveguide invariant, multipath impulse response, and ray cycles.

    PubMed

    Harrison, Chris H

    2011-05-01

    The waveguide invariant, β, that manifests itself as interference fringes or "striations" in a plot of frequency vs source-receiver separation, is usually thought of as a modal phenomenon. This paper shows that striations can be explained simply through the variation of the eigenray arrival times with range, in short, the variation of the multipath impulse response. It is possible to calculate β for a number of sound speed profiles analytically and to find what β depends on, why it switches from one value to another, how it depends on source-receiver depth, how it depends on variable bathymetry, and how smooth the sound speed profile needs to be for clear fringes. The analytical findings are confirmed by calculating striation patterns numerically starting from eigenray travel times in various stratified environments. Most importantly the approach throws some light on what can be deduced from β alone and the likelihood and utility of striations in reverberation.

  10. Adaptive MANET multipath routing algorithm based on the simulated annealing approach.

    PubMed

    Kim, Sungwook

    2014-01-01

    Mobile ad hoc network represents a system of wireless mobile nodes that can freely and dynamically self-organize network topologies without any preexisting communication infrastructure. Due to characteristics like temporary topology and absence of centralized authority, routing is one of the major issues in ad hoc networks. In this paper, a new multipath routing scheme is proposed by employing simulated annealing approach. The proposed metaheuristic approach can achieve greater and reciprocal advantages in a hostile dynamic real world network situation. Therefore, the proposed routing scheme is a powerful method for finding an effective solution into the conflict mobile ad hoc network routing problem. Simulation results indicate that the proposed paradigm adapts best to the variation of dynamic network situations. The average remaining energy, network throughput, packet loss probability, and traffic load distribution are improved by about 10%, 10%, 5%, and 10%, respectively, more than the existing schemes.

  11. CS-MIMO radars for through-the-wall imaging in an indoor multipath environment

    NASA Astrophysics Data System (ADS)

    Yu, Yao; Ahmad, Fauzia; Petropulu, Athina P.; Amin, Moeness G.

    2014-05-01

    Through-the-wall radar (TWR) systems are indispensable for situational awareness in a wide range of civilian and military applications. Multi-input multi-output (MIMO) TWR provides high spatial resolution for improved target detection in indoor environments. When combined with compressive sensing (CS), MIMO TWR enables good performance with a reduced number of samples, which, in turn, reduces the data acquisition time. Most of the existing MIMO TWR systems, either conventional or CS based, employ time-multiplexed transmitters. In this paper, we present a CS-MIMO TWR approach for the indoor environment under multipath propagation, in which the transmit antennas simultaneously emit different waveforms, thus allowing for further reduction of acquisition time as compared to time-multiplexed transmissions. Supporting simulation results are provided.

  12. Adaptive MANET Multipath Routing Algorithm Based on the Simulated Annealing Approach

    PubMed Central

    Kim, Sungwook

    2014-01-01

    Mobile ad hoc network represents a system of wireless mobile nodes that can freely and dynamically self-organize network topologies without any preexisting communication infrastructure. Due to characteristics like temporary topology and absence of centralized authority, routing is one of the major issues in ad hoc networks. In this paper, a new multipath routing scheme is proposed by employing simulated annealing approach. The proposed metaheuristic approach can achieve greater and reciprocal advantages in a hostile dynamic real world network situation. Therefore, the proposed routing scheme is a powerful method for finding an effective solution into the conflict mobile ad hoc network routing problem. Simulation results indicate that the proposed paradigm adapts best to the variation of dynamic network situations. The average remaining energy, network throughput, packet loss probability, and traffic load distribution are improved by about 10%, 10%, 5%, and 10%, respectively, more than the existing schemes. PMID:25032241

  13. A Low-Complexity Transceiver Design in Sparse Multipath Massive MIMO Channels

    NASA Astrophysics Data System (ADS)

    Yu, Yuehua; Wang, Peng; Chen, He; Li, Yonghui; Vucetic, Branka

    2016-10-01

    In this letter, we develop a low-complexity transceiver design, referred to as semi-random beam pairing (SRBP), for sparse multipath massive MIMO channels. By exploring a sparse representation of the MIMO channel in the virtual angular domain, we generate a set of transmit-receive beam pairs in a semi-random way to support the simultaneous transmission of multiple data streams. These data streams can be easily separated at the receiver via a successive interference cancelation (SIC) technique, and the power allocation among them are optimized based on the classical waterfilling principle. The achieved degree of freedom (DoF) and capacity of the proposed approach are analyzed. Simulation results show that, compared to the conventional singular value decomposition (SVD)-based method, the proposed transceiver design can achieve near-optimal DoF and capacity with a significantly lower computational complexity.

  14. Multipath interference characterization of bend-insensitive optical fibers and short jumpers.

    PubMed

    Olivero, Massimo; Greborio, Laura; Orta, Renato; Pellegrino, Paolo; Perrone, Guido; Regio, Paola

    2016-04-10

    Multipath interference (MPI) in bend-insensitive optical fibers is investigated by analyzing different aspects, ranging from a review of the theoretical background, through the analysis of measurement issues, to the characterization of short patch cords. Two setups for the characterization of MPI are analyzed, highlighting their advantages and limitations. Then, a number of commercial bend-insensitive fibers are compared, showing that they generally exhibit a level below -30  dB in the range of 1250-1350 nm. The investigation also includes short offset-spliced fiber segments, with lengths to 1 cm, to simulate the behavior of field-installable connectors and isolate their contribution to the MPI. The results show a step-like increment of MPI when two or more cm-long fiber segments are cascaded.

  15. SAR image simulation from composite sea-ship scene based on a weighted multipath model

    NASA Astrophysics Data System (ADS)

    Zhang, Min; Zhao, Ye; Nie, Ding

    2016-10-01

    A weighted multi-path model for the composite electromagnetic (EM) scattering and SAR image application of sea surface with a ship target is presented according to the distribution characteristics of specular reflection facets on a deterministic rough sea surface. This model reasonably includes the influence of non-negligible roughness of sea surface in the coupling scattering calculation, which could avoid the error caused by planar approximation in the traditional four-path model. Numerical simulation results show that the entire simulator could provide a preliminary prediction on the radar cross sections (RCS) for the composite scene with electrically large size. In addition, the total scattering contribution contains both the amplitude and phase information of the scattering facets on the composite ship-sea surface, which can be effectively applied in the scattering characteristics identification of ship target on the sea surface and SAR image simulation.

  16. Noise-Assisted Concurrent Multipath Traffic Distribution in Ad Hoc Networks

    PubMed Central

    Murata, Masayuki

    2013-01-01

    The concept of biologically inspired networking has been introduced to tackle unpredictable and unstable situations in computer networks, especially in wireless ad hoc networks where network conditions are continuously changing, resulting in the need of robustness and adaptability of control methods. Unfortunately, existing methods often rely heavily on the detailed knowledge of each network component and the preconfigured, that is, fine-tuned, parameters. In this paper, we utilize a new concept, called attractor perturbation (AP), which enables controlling the network performance using only end-to-end information. Based on AP, we propose a concurrent multipath traffic distribution method, which aims at lowering the average end-to-end delay by only adjusting the transmission rate on each path. We demonstrate through simulations that, by utilizing the attractor perturbation relationship, the proposed method achieves a lower average end-to-end delay compared to other methods which do not take fluctuations into account. PMID:24319375

  17. Rotor Vibration Reduction Using Multi-Element Multi-Path Design

    NASA Astrophysics Data System (ADS)

    Su, Keye

    Multi-Element Multi-Path (MEMP) structural design is a new concept for rotor vibration reduction. This thesis explores the possibility of applying MEMP design to helicopter rotor blades. A conceptual design is developed to investigate the MEMP blade's vibration reduction performance. In the design, the rotor blade is characterized by two centrifugally loaded beams which are connected to each other through linear and torsional springs. A computer program is built to simulate the behavior of such structures. Detailed parametric studies are conducted. The main challenges in this thesis involve the blade hub load vibration analysis, the blade thickness constraint and the blade parameter selection. The results show substantial vibration reduction for the MEMP design but the large relative deflection between the two beams, conceptualized as an internal spar and airfoil shell, remains a problem for further study.

  18. Male sperm whale acoustic behavior observed from multipaths at a single hydrophone

    NASA Astrophysics Data System (ADS)

    Laplanche, Christophe; Adam, Olivier; Lopatka, Maciej; Motsch, Jean-François

    2005-10-01

    Sperm whales generate transient sounds (clicks) when foraging. These clicks have been described as echolocation sounds, a result of having measured the source level and the directionality of these signals and having extrapolated results from biosonar tests made on some small odontocetes. The authors propose a passive acoustic technique requiring only one hydrophone to investigate the acoustic behavior of free-ranging sperm whales. They estimate whale pitch angles from the multipath distribution of click energy. They emphasize the close bond between the sperm whale's physical and acoustic activity, leading to the hypothesis that sperm whales might, like some small odontocetes, control click level and rhythm. An echolocation model estimating the range of the sperm whale's targets from the interclick interval is computed and tested during different stages of the whale's dive. Such a hypothesis on the echolocation process would indicate that sperm whales echolocate their prey layer when initiating their dives and follow a methodic technique when foraging.

  19. Experimental Assessment of Different Receiver Structures for Underwater Acoustic Communications over Multipath Channels

    PubMed Central

    Zhang, Guosong; Hovem, Jens M.; Dong, Hefeng

    2012-01-01

    Underwater communication channels are often complicated, and in particular multipath propagation may cause intersymbol interference (ISI). This paper addresses how to remove ISI, and evaluates the performance of three different receiver structures and their implementations. Using real data collected in a high-frequency (10–14 kHz) field experiment, the receiver structures are evaluated by off-line data processing. The three structures are multichannel decision feedback equalizer (DFE), passive time reversal receiver (passive-phase conjugation (PPC) with a single channel DFE), and the joint PPC with multichannel DFE. In sparse channels, dominant arrivals represent the channel information, and the matching pursuit (MP) algorithm which exploits the channel sparseness has been investigated for PPC processing. In the assessment, it is found that: (1) it is advantageous to obtain spatial gain using the adaptive multichannel combining scheme; and (2) the MP algorithm improves the performance of communications using PPC processing. PMID:22438755

  20. DOA Estimation under Unknown Mutual Coupling and Multipath with Improved Effective Array Aperture

    PubMed Central

    Wang, Yuexian; Trinkle, Matthew; Ng, Brian W.-H.

    2015-01-01

    Subspace-based high-resolution direction of arrival (DOA) estimation significantly deteriorates under array manifold perturbation and rank deficiency of the covariance matrix due to mutual coupling and multipath propagation, respectively. In this correspondence, the unknown mutual coupling can be circumvented by the proposed method without any passive or active calibration process, and the DOA of the coherent signals can be accurately estimated accordingly. With a newly constructed matrix, the deficient rank can be restored, and the effective array aperture can be extended compared with conventional spatial smoothing. The proposed method achieves a good robustness and DOA estimation accuracy with unknown mutual coupling. The simulation results demonstrate the validity and efficiency of the proposed method. PMID:26670235

  1. Miniature interferometer terminals for earth surveying /MITES/ - Geodetic results and multipath effects

    NASA Astrophysics Data System (ADS)

    Counselman, C. C., III

    Experiments which confirm theoretical predictions regarding the use of MITES terminals for measuring baseline vectors on the ground using interferometric observations of earth-orbiting satellites are presented. A set of five global positioning satellites (GPS) were observed by MITES antennas at 1.3 hour time intervals on each of two days, and it is found that this distribution facilitates the correct resolution of interferometer fringe ambiguities. In addition, experiments show that multipath interference does not pose significant problems at the centimeter level. MITES is still being developed using baseline lengths of up to 4,000 km, and a new system should demonstrate improved geodetic accuracy, and will probably require one hour observation intervals.

  2. Does Distance Determine Who Attends a University in Germany?

    ERIC Educational Resources Information Center

    Spiess, C. Katharina; Wrohlich, Katharina

    2010-01-01

    We analyze the role of distance to the nearest university in the demand for higher education in Germany. Distance could matter due to transaction costs or due to neighborhood effects. We use data from the German Socio-Economic Panel (SOEP) combined with a database on university postal codes to estimate a discrete choice model of the demand for…

  3. Multipath sparse coding for scene classification in very high resolution satellite imagery

    NASA Astrophysics Data System (ADS)

    Fan, Jiayuan; Tan, Hui Li; Lu, Shijian

    2015-10-01

    With the rapid development of various satellite sensors, automatic and advanced scene classification technique is urgently needed to process a huge amount of satellite image data. Recently, a few of research works start to implant the sparse coding for feature learning in aerial scene classification. However, these previous research works use the single-layer sparse coding in their system and their performances are highly related with multiple low-level features, such as scale-invariant feature transform (SIFT) and saliency. Motivated by the importance of feature learning through multiple layers, we propose a new unsupervised feature learning approach for scene classification on very high resolution satellite imagery. The proposed unsupervised feature learning utilizes multipath sparse coding architecture in order to capture multiple aspects of discriminative structures within complex satellite scene images. In addition, the dense low-level features are extracted from the raw satellite data by using different image patches with varying size at different layers, and this approach is not limited to a particularly designed feature descriptors compared with the other related works. The proposed technique has been evaluated on two challenging high-resolution datasets, including the UC Merced dataset containing 21 different aerial scene categories with a 1 foot resolution and the Singapore dataset containing 5 land-use categories with a 0.5m spatial resolution. Experimental results show that it outperforms the state-of-the-art that uses the single-layer sparse coding. The major contributions of this proposed technique include (1) a new unsupervised feature learning approach to generate feature representation for very high-resolution satellite imagery, (2) the first multipath sparse coding that is used for scene classification in very high-resolution satellite imagery, (3) a simple low-level feature descriptor instead of many particularly designed low-level descriptor

  4. Estimation of multipath transmission parameters for quantitative ultrasound measurements of bone.

    PubMed

    Dencks, Stefanie; Schmitz, Georg

    2013-09-01

    When applying quantitative ultrasound (QUS) measurements to bone for predicting osteoporotic fracture risk, the multipath transmission of sound waves frequently occurs. In the last 10 years, the interest in separating multipath QUS signals for their analysis awoke, and led to the introduction of several approaches. Here, we compare the performances of the two fastest algorithms proposed for QUS measurements of bone: the modified least-squares Prony method (MLSP), and the space alternating generalized expectation maximization algorithm (SAGE) applied in the frequency domain. In both approaches, the parameters of the transfer functions of the sound propagation paths are estimated. To provide an objective measure, we also analytically derive the Cramér-Rao lower bound of variances for any estimator and arbitrary transmit signals. In comparison with results of Monte Carlo simulations, this measure is used to evaluate both approaches regarding their accuracy and precision. Additionally, with simulations using typical QUS measurement settings, we illustrate the limitations of separating two superimposed waves for varying parameters with focus on their temporal separation. It is shown that for good SNRs around 100 dB, MLSP yields better results when two waves are very close. Additionally, the parameters of the smaller wave are more reliably estimated. If the SNR decreases, the parameter estimation with MLSP becomes biased and inefficient. Then, the robustness to noise of the SAGE clearly prevails. Because a clear influence of the interrelation between the wavelength of the ultrasound signals and their temporal separation is observable on the results, these findings can be transferred to QUS measurements at other sites. The choice of the suitable algorithm thus depends on the measurement conditions.

  5. Electricity demand curtailment planning

    SciTech Connect

    Allentuck, J; Carroll, O; Schnader, M

    1980-01-01

    The state of electricity demand curtailment planning for long term electricity supply disruptions is reviewed. Legal, institutional and technological problems associated with demand curtailment plans are examined, and the existence of well defined social objectives on the part of planners is questioned. A linear programming approach to electricity demand curtailment planning is presented.

  6. Going the Distance Part 1: Three Keys to Successfully Delivering an Extension Course at a Distance

    ERIC Educational Resources Information Center

    Rader, Heidi B.

    2012-01-01

    Distance learning is common in most segments of education, and the body of knowledge is extensive. Extension can apply much of this research but uniquely educates students whose presence is voluntary. The literature suggests that successful distance-delivered Extension courses share three characteristics: course content is high quality, demand is…

  7. Going the Distance Part 1: Three Keys to Successfully Delivering an Extension Course at a Distance

    ERIC Educational Resources Information Center

    Rader, Heidi B.

    2012-01-01

    Distance learning is common in most segments of education, and the body of knowledge is extensive. Extension can apply much of this research but uniquely educates students whose presence is voluntary. The literature suggests that successful distance-delivered Extension courses share three characteristics: course content is high quality, demand is…

  8. Demand Response Analysis Tool

    SciTech Connect

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be used by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.

  9. Defining Distance Learning and Distance Education.

    ERIC Educational Resources Information Center

    King, Frederick B.; Young, Michael F.; Drivere-Richmond, Kelly; Schrader, P. G.

    2001-01-01

    This paper offers precise definitions of distance learning and distance education, and their interrelationship. First, a single definition of learning is proposed, and then the concept of learning is broken down into three subcategories: instruction, exploration, and serendipity. Each is defined and the concepts of distance learning and distance…

  10. Enchanced interference cancellation and telemetry reception in multipath environments with a single paraboic dish antenna using a focal plane array

    NASA Technical Reports Server (NTRS)

    Mukai, Ryan (Inventor); Vilnrotter, Victor A. (Inventor)

    2011-01-01

    An Advanced Focal Plane Array ("AFPA") for parabolic dish antennas that exploits spatial diversity to achieve better channel equalization performance in the presence of multipath (better than temporal equalization alone), and which is capable of receiving from two or more sources within a field-of-view in the presence of multipath. The AFPA uses a focal plane array of receiving elements plus a spatio-temporal filter that keeps information on the adaptive FIR filter weights, relative amplitudes and phases of the incoming signals, and which employs an Interference Cancelling Constant Modulus Algorithm (IC-CMA) that resolves multiple telemetry streams simultaneously from the respective aero-nautical platforms. This data is sent to an angle estimator to calculate the target's angular position, and then on to Kalman filters FOR smoothing and time series prediction. The resulting velocity and acceleration estimates from the time series data are sent to an antenna control unit (ACU) to be used for pointing control.

  11. Analytical Derivation of 2×2 MIMO Channel Capacity in Terms of Multipath Angle Spread and Signal Strength

    NASA Astrophysics Data System (ADS)

    Yigit, Halil; Kavak, Adnan

    2012-03-01

    The capacity of multiple-input multiple-output (MIMO) wireless communication channels is affected by the multipath angle spread and relative multiple signal strength (RMSS) at both sides of the transmitter and the receiver. In this paper, we study analytically how these two factors emerge in the MIMO capacity equation when the channel state information (CSI) is unknown at the transmitter and perfectly known at the receiver. Mathematical expression for the channel capacity is carried out for 2×2 MIMO system and two propagation paths between the base station (BS) and the mobile terminal (MS) are considered. The proposed analytical model is verified through numerical results, which show that channel capacity increases with increasing angle spread. Also, as the relative strength of multipaths becomes larger, the better channel capacity is obtained.

  12. Dynamic time and spectrum fragmentation-aware service provisioning in elastic optical networks with multi-path routing

    NASA Astrophysics Data System (ADS)

    Zhu, Ruijie; Zhao, Yongli; Yang, Hui; Yu, Xiaosong; Zhang, Jie; Yousefpour, Ashkan; Wang, Nannan; Jue, Jason P.

    2016-12-01

    In this paper, we propose a multi-path fragmentation-aware routing, modulation and spectrum assignment algorithm (RMSA) for advance reservation (AR) and immediate reservation (IR) requests in elastic optical networks. Immediate reservation requests should be provided with service immediately, while advance reservation requests have specific starting times and holding times. As lightpaths are set up and torn down, fragmentation may occur in both spectrum and time domains. To decrease the two-dimensional fragmentation and to solve the problem of resource scarcity, we propose splitting requests into different parts and transferring these parts along one or more paths utilizing sliceable bandwidth variable transponders. We first introduce a model to solve the problem and propose a two-dimensional fragmentation occurrence measurement in spectrum and time domains. Then we propose a multi-path fragmentation-aware RMSA algorithm (MPFA). Simulation results show that MPFA can achieve better performance than existing algorithms in terms of blocking probability and spectrum utilization.

  13. Distance Education Quality Course Delivery Framework: A Formative Research Study

    ERIC Educational Resources Information Center

    Berta, Michael Raymond

    2013-01-01

    In the Fall 2010 semester, student enrollment in distance education courses increased in the United States to over 6.1 million students taking at least one distance course. Distance education allows institutions to meet increasing demands from the government and business sectors for more graduates in ways that face-to-face courses cannot meet with…

  14. Moments Of Microdiversity EGC Receivers And Macrodiversity SC Receiver Output Signal Over Gamma Shadowed Nakagami-m Multipath Fading Channel

    NASA Astrophysics Data System (ADS)

    Djordjević, Nebojša; Jaksić, Branimir S.; Matović, Ana; Matović, Marija; Smilić, Marko

    2015-11-01

    A system with macrodiversity selection combining (SC) receiver and for microdiversity equal gain combining (EGC) receivers is considered. Received signal is subjected, simultaneously to multipath fading and shadowing, resulting in signal envelope and signal power variation. Closed form expressions for moments of macrodiversity SC receiver output signal envelope are calculated. Numerical expressions are plotted to present the influences of Gamma shadowing severity and Nakagami-m severity on moments of proposed system output signal.

  15. The multipath propagation effect in gunshot acoustics and its impact on the design of sniper positioning systems

    NASA Astrophysics Data System (ADS)

    Ramos, António L. L.; Holm, Sverre; Gudvangen, Sigmund; Otterlei, Ragnvald

    2013-06-01

    Counter sniper systems rely on the detection and parameter estimation of the shockwave and the muzzle blast in order to determine the sniper location. In real-world situations, these acoustical signals can be disturbed by natural phenomena like weather and climate conditions, multipath propagation effect, and background noise. While some of these issues have received some attention in recent publications with application to gunshot acoustics, the multipath propagation phenomenon whose effect can not be neglected, specially in urban environments, has not yet been discussed in details in the technical literature in the same context. Propagating sound waves can be reflected at the boundaries in the vicinity of sound sources or receivers, whenever there is a difference in acoustical impedance between the reflective material and the air. Therefore, the received signal can be composed of a direct-path signal plus N scaled delayed copies of that signal. This paper presents a discussion on the multipath propagation effect and its impact on the performance and reliability of sniper positioning systems. In our formulation, propagation models for both the shockwave and the muzzle blast are considered and analyzed. Conclusions following the theoretical analysis of the problem are fully supported by actual gunshots acoustical signatures.

  16. Perceived distance during golf putting.

    PubMed

    Hasegawa, Yumiko; Koyama, Satoshi; Inomata, Kimihiro

    2013-12-01

    This study examined the effect of anxiety states on the relationship between golf-putting distance and performance in an environment requiring high movement accuracy. Twenty-three amateur golfers attempted 15 putts at each of three putting distances, 1.25, 1.50, and 1.75m, under conditions characterized by both control demands and pressure. All attempts were recorded, and kinematic features were analyzed. Under conditions involving an audience and a monetary reward, the mean score on the State-Trait Anxiety Inventory Y-1 and the mean heart rate increased by 14 points and 11bpm, respectively. We grouped participants on an a posteriori basis using the median split. The backswing of high-anxiety performers shortened, the downswing speed declined, and the relative time to peak club-head velocity changed when putting under pressure from 1.25m. In contrast, no change in backswing or relative time to peak velocity was observed in low-anxiety performers, although impact velocity increased under this condition. These results indicate that the degree to which both low- and high-anxiety golfers were anxious about failure affected motor control at the 1.25-m distance, suggesting that a distortion in perceived distance may result from the interaction between putting distance and anxiety related to failure during golf putting.

  17. Drivers of U.S. mineral demand

    USGS Publications Warehouse

    Sznopek, John L.

    2006-01-01

    Introduction: The word 'demand' has different meanings for different people. To some, it means their 'wants and needs,' to others it is what they consume. Yet, when considering economics, demand refers to the specific amounts of goods or services that individuals will purchase at various prices. Demand is measured over a given time period. It is determined by a number of factors including income, tastes, and the price of complementary and substitute goods. In this paper, the term consumption is used fairly synonymously with the term demand. Most mineral commodities, like iron ore, copper, zinc, and gravel, are intermediate goods, which means that they are used in the production of other goods, called final goods. Demand for intermediate goods is called derived demand because such demand is derived from the demand for final goods. When demand increases for a commodity, generally the price rises. With everything else held constant, this increases the profits for those who provide this commodity. Normally, this would increase profits of existing producers and attract new producers to the market. When demand for a commodity decreases, generally the price falls. Normally, this would cause profits to fall and, as a consequence, the least efficient firms may be forced from the industry. Demand changes for specific materials as final goods or production techniques are reengineered while maintaining or improving product performance, for example, the use of aluminum in the place of copper in long distance electrical transmission lines or plastic replacing steel in automobile bumpers. Substitution contributes to efficient material usage by utilizing cheaper or technically superior materials. In this way, it may also alleviate materials scarcity. If a material becomes relatively scarce (and thus more expensive), a more abundant (and less expensive) material generally replaces it (Wagner and others, 2003, p. 91).

  18. An Energy-Efficient and Robust Multipath Routing Protocol for Cognitive Radio Ad Hoc Networks

    PubMed Central

    Singh, Kishor

    2017-01-01

    Routing in cognitive radio ad hoc networks (CRAHNs) is a daunting task owing to dynamic topology, intermittent connectivity, spectrum heterogeneity, and energy constraints. Other prominent aspects such as channel stability, path reliability, and route discovery frequency should also be exploited. Several routing protocols have been proposed for CRAHNs in the literature. By stressing on one of the aspects more than any other, however, they do not satisfy all requirements of throughput, energy efficiency, and robustness. In this paper, we propose an energy-efficient and robust multipath routing (ERMR) protocol for CRAHNs by considering all prominent aspects including residual energy and channel stability in design. Even when the current routing path fails, the alternative routing path is immediately utilized. In establishing primary and alternative routing paths, both residual energy and channel stability are exploited simultaneously. Our simulation study shows that the proposed ERMR outperforms the conventional protocol in terms of network throughput, packet delivery ratio, energy consumption, and end-to-end delay. PMID:28869551

  19. GPS Diffractive Reflectometry and Further Developments in SNR- and Phase-based GPS Multipath Reflectometry

    NASA Astrophysics Data System (ADS)

    Geremia-Nievinski, F.; Ferreira e Silva, M.; Boniface, K.; Galera Monico, J. F.

    2015-12-01

    The validation of remote sensing environmental estimates requires knowledge of their spatial extent and resolution. Here we consider coherent radio reflections routinely observed in ground-based GPS reflectometry. Their footprint is often conceptualized in terms of the specular point (SP) and the first Fresnel zone (FFZ). Such infinitesimal point and finite zone can be generalized into a spatially continuous sensitivity kernel (SK). The SK represents a diffraction pattern, as the importance of each surface portion depends on its power and phase scattering. We measured the SK of a GPS radio reflection under bi-path reception conditions. The SK exhibited oscillations along the plane of incidence. The envelope of oscillations peaked near the SP and persisted in its decay well beyond the FFZ. Within the FFZ, sensitivity was skewed towards the antenna. This experiment suggests the feasibility of overcoming the diffraction limit and resolving features smaller than the FFZ via GPS diffractive reflectometry. We also report more recent developments in SNR- and carrier-phase-based GPS Multipath Reflectometry.

  20. A fast algorithm for direction of arrival estimation in multipath environments

    NASA Astrophysics Data System (ADS)

    Tayem, Nizar; Naraghi-Pour, Mort

    2007-04-01

    A new spectral direction of arrival (DOA) estimation algorithm is proposed that can rapidly estimate the DOA of non-coherent as well as coherent incident signals. As such the algorithm is effective for DOA estimation in multi-path environments. The proposed method constructs a data model based on a Hermitian Toeplitz matrix whose rank is related to the DOA of incoming signals and is not affected if the incoming sources are highly correlated. The data is rearranged in such a way that extends the dimensionality of the noise space. Consequently, the signal and noise spaces can be estimated more accurately. The proposed method has several advantages over the well-known classical subspace algorithms such as MUSIC and ESPRIT, as well as the Matrix Pencil (MP) method. In particular, the proposed method is suitable for real-time applications since it does not require multiple snapshots in order to estimate the DOA's. Moreover, no forward/backward spatial smoothing of the covariance matrix is needed, resulting in reduced computational complexity. Finally, the proposed method can estimate the DOA of coherent sources. The simulation results verify that the proposed method outperforms the MUSIC, ESPRIT and Matrix Pencil algorithms.

  1. Finding the multipath propagation of multivariable crude oil prices using a wavelet-based network approach

    NASA Astrophysics Data System (ADS)

    Jia, Xiaoliang; An, Haizhong; Sun, Xiaoqi; Huang, Xuan; Gao, Xiangyun

    2016-04-01

    The globalization and regionalization of crude oil trade inevitably give rise to the difference of crude oil prices. The understanding of the pattern of the crude oil prices' mutual propagation is essential for analyzing the development of global oil trade. Previous research has focused mainly on the fuzzy long- or short-term one-to-one propagation of bivariate oil prices, generally ignoring various patterns of periodical multivariate propagation. This study presents a wavelet-based network approach to help uncover the multipath propagation of multivariable crude oil prices in a joint time-frequency period. The weekly oil spot prices of the OPEC member states from June 1999 to March 2011 are adopted as the sample data. First, we used wavelet analysis to find different subseries based on an optimal decomposing scale to describe the periodical feature of the original oil price time series. Second, a complex network model was constructed based on an optimal threshold selection to describe the structural feature of multivariable oil prices. Third, Bayesian network analysis (BNA) was conducted to find the probability causal relationship based on periodical structural features to describe the various patterns of periodical multivariable propagation. Finally, the significance of the leading and intermediary oil prices is discussed. These findings are beneficial for the implementation of periodical target-oriented pricing policies and investment strategies.

  2. Multimodal function optimization using minimal representation size clustering and its application to planning multipaths.

    PubMed

    Hocaoğlu, C; Sanderson, A C

    1997-01-01

    A novel genetic algorithm (GA) using minimal representation size cluster (MRSC) analysis is designed and implemented for solving multimodal function optimization problems. The problem of multimodal function optimization is framed within a hypothesize-and-test paradigm using minimal representation size (minimal complexity) for species formation and a GA. A multiple-population GA is developed to identify different species. The number of populations, thus the number of different species, is determined by the minimal representation size criterion. Therefore, the proposed algorithm reveals the unknown structure of the multimodal function when a priori knowledge about the function is unknown. The effectiveness of the algorithm is demonstrated on a number of multimodal test functions. The proposed scheme results in a highly parallel algorithm for finding multiple local minima. In this paper, a path-planning algorithm is also developed based on the MRSC_GA algorithm. The algorithm utilizes MRSC_GA for planning paths for mobile robots, piano-mover problems, and N-link manipulators. The MRSC_GA is used for generating multipaths to provide alternative solutions to the path-planning problem. The generation of alternative solutions is especially important for planning paths in dynamic environments. A novel iterative multiresolution path representation is used as a basis for the GA coding. The effectiveness of the algorithm is demonstrated on a number of two-dimensional path-planning problems.

  3. A Multipath Routing Protocol Based on Clustering and Ant Colony Optimization for Wireless Sensor Networks

    PubMed Central

    Yang, Jing; Xu, Mai; Zhao, Wei; Xu, Baoguo

    2010-01-01

    For monitoring burst events in a kind of reactive wireless sensor networks (WSNs), a multipath routing protocol (MRP) based on dynamic clustering and ant colony optimization (ACO) is proposed. Such an approach can maximize the network lifetime and reduce the energy consumption. An important attribute of WSNs is their limited power supply, and therefore some metrics (such as energy consumption of communication among nodes, residual energy, path length) were considered as very important criteria while designing routing in the MRP. Firstly, a cluster head (CH) is selected among nodes located in the event area according to some parameters, such as residual energy. Secondly, an improved ACO algorithm is applied in the search for multiple paths between the CH and sink node. Finally, the CH dynamically chooses a route to transmit data with a probability that depends on many path metrics, such as energy consumption. The simulation results show that MRP can prolong the network lifetime, as well as balance of energy consumption among nodes and reduce the average energy consumption effectively. PMID:22399890

  4. A Weighted Multipath Measurement Based on Gene Ontology for Estimating Gene Products Similarity

    PubMed Central

    Liu, Lizhen; Dai, Xuemin; Song, Wei; Lu, Jingli

    2014-01-01

    Abstract Many different methods have been proposed for calculating the semantic similarity of term pairs based on gene ontology (GO). Most existing methods are based on information content (IC), and the methods based on IC are used more commonly than those based on the structure of GO. However, most IC-based methods not only fail to handle identical annotations but also show a strong bias toward well-annotated proteins. We propose a new method called weighted multipath measurement (WMM) for estimating the semantic similarity of gene products based on the structure of the GO. We not only considered the contribution of every path between two GO terms but also took the depth of the lowest common ancestors into account. We assigned different weights for different kinds of edges in GO graph. The similarity values calculated by WMM can be reused because they are only relative to the characteristics of GO terms. Experimental results showed that the similarity values obtained by WMM have a higher accuracy. We compared the performance of WMM with that of other methods using GO data and gene annotation datasets for yeast and humans downloaded from the GO database. We found that WMM is more suited for prediction of gene function than most existing IC-based methods and that it can distinguish proteins with identical annotations (two proteins are annotated with the same terms) from each other. PMID:25229994

  5. Wood supply and demand

    Treesearch

    Peter J. Ince; David B. McKeever

    2011-01-01

    At times in history, there have been concerns that demand for wood (timber) would be greater than the ability to supply it, but that concern has recently dissipated. The wood supply and demand situation has changed because of market transitions, economic downturns, and continued forest growth. This article provides a concise overview of this change as it relates to the...

  6. Distance Education Council.

    ERIC Educational Resources Information Center

    Indira Gandhi National Open University, New Delhi (India). Distance Education Council.

    Since its inception in India in 1962, distance education has grown in popularity. The Distance Education Council (DEC) directs distance learning within India's higher education system. The DEC's promotion, coordination, and maintenance of standards for distance education are its three major roles. Its initiatives include grants, support for…

  7. Facilitating Distance Education.

    ERIC Educational Resources Information Center

    Rossman, Mark H., Ed.; Rossman, Maxine E., Ed.

    1995-01-01

    This collection of articles on distance learning reflects the perspectives and concerns of the learner and the facilitator of learning in distance education setting. Eight chapters are included: (1) "The Evolution and Advantages of Distance Education" (John E. Cantelon) traces the history of distance education and demonstrates how it transcends…

  8. Distance Education in Turkey

    ERIC Educational Resources Information Center

    Ruzgar, Nursel Selver

    2004-01-01

    Many countries of the world are using distance education with various ways, by INTERNET, by post and by TV. In this work, development of distance education in Turkey has been presented from the beginning. After discussing types and applications for different levels of distance education in Turkey, the distance education was given in the cultural…

  9. Facilitating Distance Education.

    ERIC Educational Resources Information Center

    Rossman, Mark H., Ed.; Rossman, Maxine E., Ed.

    1995-01-01

    This collection of articles on distance learning reflects the perspectives and concerns of the learner and the facilitator of learning in distance education setting. Eight chapters are included: (1) "The Evolution and Advantages of Distance Education" (John E. Cantelon) traces the history of distance education and demonstrates how it transcends…

  10. The Leadership Roles of Distance Learning Administrators (DLAs) in Increasing Educational Value and Quality Perceptions

    ERIC Educational Resources Information Center

    McFarlane, Donovan A.

    2011-01-01

    This paper examines the leadership roles of distance learning administrators (DLAs) in light of the demand and need for value and quality in educational distance learning programs and schools. The author explores the development of distance learning using available and emerging technologies in relation to increased demand for education, training,…

  11. The Leadership Roles of Distance Learning Administrators (DLAs) in Increasing Educational Value and Quality Perceptions

    ERIC Educational Resources Information Center

    McFarlane, Donovan A.

    2011-01-01

    This paper examines the leadership roles of distance learning administrators (DLAs) in light of the demand and need for value and quality in educational distance learning programs and schools. The author explores the development of distance learning using available and emerging technologies in relation to increased demand for education, training,…

  12. Training for Distance Teaching through Distance Learning.

    ERIC Educational Resources Information Center

    Cadorath, Jill; Harris, Simon; Encinas, Fatima

    2002-01-01

    Describes a mixed-mode bachelor degree course in English language teaching at the Universidad Autonoma de Puebla (Mexico) that was designed to help practicing teachers write appropriate distance education materials by giving them the experience of being distance students. Includes a course outline and results of a course evaluation. (Author/LRW)

  13. Training for Distance Teaching through Distance Learning.

    ERIC Educational Resources Information Center

    Cadorath, Jill; Harris, Simon; Encinas, Fatima

    2002-01-01

    Describes a mixed-mode bachelor degree course in English language teaching at the Universidad Autonoma de Puebla (Mexico) that was designed to help practicing teachers write appropriate distance education materials by giving them the experience of being distance students. Includes a course outline and results of a course evaluation. (Author/LRW)

  14. Physical demand of seven closed agility drills.

    PubMed

    Atkinson, Mark; Rosalie, Simon; Netto, Kevin

    2016-11-01

    The present study aimed to quantify the demand of seven generic, closed agility drills. Twenty males with experience in invasion sports volunteered to participate in this study. They performed seven, closed agility drills over a standardised 30-m distance. Physical demand measures of peak velocity, total foot contacts, peak impacts, completion time, and maximum heart rate were obtained via the use of wearable sensor technologies. A subjective rating of perceived exertion (RPE) was also obtained. All measures, with the exception of maximum heart rates and RPE were able to delineate drills in terms of physical and physiological demand. The findings of this study exemplify the differences in demand of agility-type movements. Drill demand was dictated by the type of agility movement initiated with the increase in repetitiveness of a given movement type also contributing to increased demand. Findings from this study suggest agility drills can be manipulated to vary physical and physiological demand. This allows for the optimal application of training principles such as overload, progression, and periodisation.

  15. Radio and radar holes and multipath zones: The global and local influences on atmospheric refractive structure and resulting adverse radio and radar performance

    NASA Astrophysics Data System (ADS)

    Cote, Owen R.; Morrissey, James F.; Izumi, Yutaka

    1987-11-01

    Results from recent USAF field testing of digital radio line-of-sight (LOS) and troposcatter (TROPO) radio path performance, in which concurrent fine vertical resolution refractivity profiles were also made, show that multipath effects on LOS and TROPO complement each other both performancewise and weatherwise. Maximum multipath delay is a clear propagation path related event in LOS and a heavy rain/thunderstorm related event in TROPO. Because radio holes and multipath zones occur concurrently, being produced by the same refractive ducting layer, LOS paths can be designed to minimize the occurrence of frequency selective fading at the possible expense of some increase in non-frequency selective fading under strong ducting conditions. Path length is less important in affecting path performance than are duct layer strength and geometry. The rule that maximum multipath delay goes as the third power of path length is not confirmed by these measurements. Measured maximum multipath delay on an LOS is better represented by a half-power dependence on path length.

  16. Impact of Energy Demands

    ERIC Educational Resources Information Center

    Cambel, Ali B.

    1970-01-01

    The types of pollutants associated with the process of power production are identified. A nine-point proposal is presented on the ways the increase in power demands might be achieved with the minimum threat to the environment. (PR)

  17. Latin American demand

    SciTech Connect

    1994-12-01

    From Mexico to Argentina, independent power companies are finding great demand for their services in Latin America. But while legal and economic conditions are increasingly favorable, political and financial uncertainties make power development challenging.

  18. A study of infrasonic anisotropy and multipathing in the atmosphere using seismic networks.

    PubMed

    Hedlin, Michael A H; Walker, Kristoffer T

    2013-02-13

    We discuss the use of reverse time migration (RTM) with dense seismic networks for the detection and location of sources of atmospheric infrasound. Seismometers measure the response of the Earth's surface to infrasound through acoustic-to-seismic coupling. RTM has recently been applied to data from the USArray network to create a catalogue of infrasonic sources in the western US. Specifically, several hundred sources were detected in 2007-2008, many of which were not observed by regional infrasonic arrays. The influence of the east-west stratospheric zonal winds is clearly seen in the seismic data with most detections made downwind of the source. We study this large-scale anisotropy of infrasonic propagation, using a winter and summer source in Idaho. The bandpass-filtered (1-5 Hz) seismic waveforms reveal in detail the two-dimensional spread of the infrasonic wavefield across the Earth's surface within approximately 800 km of the source. Using three-dimensional ray tracing, we find that the stratospheric winds above 30 km altitude in the ground-to-space (G2S) atmospheric model explain well the observed anisotropy pattern. We also analyse infrasound from well-constrained explosions in northern Utah with a denser IRIS PASSCAL seismic network. The standard G2S model correctly predicts the anisotropy of the stratospheric duct, but it incorrectly predicts the dimensions of the shadow zones in the downwind direction. We show that the inclusion of finer-scale structure owing to internal gravity waves infills the shadow zones and predicts the observed time durations of the signals. From the success of this method in predicting the observations, we propose that multipathing owing to fine scale, layer-cake structure is the primary mechanism governing propagation for frequencies above approximately 1 Hz and infer that stochastic approaches incorporating internal gravity waves are a useful improvement to the standard G2S model for infrasonic propagation modelling.

  19. Modeling the effects of Multi-path propagation and scintillation on GPS signals

    NASA Astrophysics Data System (ADS)

    Habash Krause, L.; Wilson, S. J.

    2014-12-01

    GPS signals traveling through the earth's ionosphere are affected by charged particles that often disrupt the signal and the information it carries due to "scintillation", which resembles an extra noise source on the signal. These signals are also affected by weather changes, tropospheric scattering, and absorption from objects due to multi-path propagation of the signal. These obstacles cause distortion within information and fading of the signal, which ultimately results in phase locking errors and noise in messages. In this work, we attempted to replicate the distortion that occurs in GPS signals using a signal processing simulation model. We wanted to be able to create and identify scintillated signals so we could better understand the environment that caused it to become scintillated. Then, under controlled conditions, we simulated the receiver's ability to suppress scintillation in a signal. We developed a code in MATLAB that was programmed to: 1. Create a carrier wave and then plant noise (four different frequencies) on the carrier wave, 2. Compute a Fourier transform on the four different frequencies to find the frequency content of a signal, 3. Use a filter and apply it to the Fourier transform of the four frequencies and then compute a Signal-to-noise ratio to evaluate the power (in Decibels) of the filtered signal, and 4.Plot each of these components into graphs. To test the code's validity, we used user input and data from an AM transmitter. We determined that the amplitude modulated signal or AM signal would be the best type of signal to test the accuracy of the MATLAB code due to its simplicity. This code is basic to give students the ability to change and use it to determine the environment and effects of noise on different AM signals and their carrier waves. Overall, we were able to manipulate a scenario of a noisy signal and interpret its behavior and change due to its noisy components: amplitude, frequency, and phase shift.

  20. Correcting for GPS Multipath Error in LIDAR Surveys Using Crossover Analysis

    NASA Astrophysics Data System (ADS)

    Borsa, A. A.; Bills, B. G.; Fricker, H. A.; Minster, J. B.

    2003-12-01

    The quality of the range measurement from an airborne Light Detection and Ranging (LIDAR) survey is largely dependent on the accuracy of the GPS trajectory for the aircraft. GPS elevation error - which today is largely due to multipath effects at the aircraft and the GPS base station - contributes a major portion of the LIDAR vertical error budget. The usual practice of quoting an RMS value for the GPS component of the error budget implies that GPS noise is Gaussian, yet the true nature of the noise signal is time-varying with significant power at long periods. GPS noise with a 3-cm RMS can easily have more than 10 cm of total variability on a time scale of tens of minutes to several hours. We show examples from an airborne LIDAR survey over the open-pit Hector Mine where repeated flyovers of an area used for ground truth revealed large elevation biases between passes that could not be resolved by adjusting the (non-GPS) parameters of the LIDAR system. As part of the post-processing of a large kinematic GPS survey of the salar de Uyuni, Bolivia, we have developed an algorithm to correct time-varying GPS error using elevation mismatches at crossovers between vehicle paths. The survey was originally designed to incorporate a large number of crossovers for the purpose of determining survey repeatability, and we were later able to exploit the crossover difference observations to solve for a model of the actual error signal generating those differences. We give results from tests with synthetic noise and topography data indicating that this method removes more than two-thirds of the added noise from the topographic signal, and we show the excellent results obtained for the salar de Uyuni survey data. We believe that airborne LIDAR surveys incorporating crossovers at regular intervals can also benefit from the application of this algorithm.

  1. Demand Response Dispatch Tool

    SciTech Connect

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for both reliability and economic conditions.

  2. Methylmercury determination using a hyphenated high performance liquid chromatography ultraviolet cold vapor multipath atomic absorption spectrometry system

    NASA Astrophysics Data System (ADS)

    Campos, Reinaldo C.; Gonçalves, Rodrigo A.; Brandão, Geisamanda P.; Azevedo, Marlo S.; Oliveira, Fabiana; Wasserman, Julio

    2009-06-01

    The present work investigates the use of a multipath cell atomic absorption mercury detector for mercury speciation analysis in a hyphenated high performance liquid chromatography assembly. The multipath absorption cell multiplies the optical path while energy losses are compensated by a very intense primary source. Zeeman-effect background correction compensates for non-specific absorption. For the separation step, the mobile phase consisted in a 0.010% m/v mercaptoethanol solution in 5% methanol (pH = 5), a C 18 column was used as stationary phase, and post column treatment was performed by UV irradiation (60 °C, 13 W). The eluate was then merged with 3 mol L - 1 HCl, reduction was performed by a NaBH 4 solution, and the Hg vapor formed was separated at the gas-liquid separator and carried through a desiccant membrane to the detector. The detector was easily attached to the system, since an external gas flow to the gas-liquid separator was provided. A multivariate approach was used to optimize the procedure and peak area was used for measurement. Instrumental limits of detection of 0.05 µg L - 1 were obtained for ionic (Hg 2+) and HgCH 3+, for an injection volume of 200 µL. The multipath atomic absorption spectrometer proved to be a competitive mercury detector in hyphenated systems in relation to the most commonly used atomic fluorescence and inductively coupled plasma mass spectrometric detectors. Preliminary application studies were performed for the determination of methyl mercury in sediments.

  3. Analysis of F-Canyon Effluents During the Dissolution Cycle with a Fourier Transform Infrared Spectrometer/Multipath Cell

    SciTech Connect

    Villa, E.

    1999-07-28

    Air samples from F-Canyon effluents were collected at the F-Canyon stack and transported to a laboratory at the Savannah River Technology Center (SRTC) for analysis using a Fourier transform infrared spectrometer in conjunction with a multipath cell. Air samples were collected during the decladding and acid cuts of the dissolution of the irradiated aluminum-cladded slugs. The FTIR analyses of the air samples show the presence of NO2, NO, HNO2, N2O, SF6, and 85Kr during the dissolution cycle. The concentration time profiles of these effluents corresponded with expected release rates from the F-Canyon operations.

  4. Going the Distance.

    ERIC Educational Resources Information Center

    Leno, Arthur J.

    2003-01-01

    Describes the development and implementation of the distance education program at Peirce College. This Internet-mediated distance learning program focuses on practical fields of study, drawing on the college's strengths in business administration, information technology, and paralegal studies. (SLD)

  5. Theme: Distance Education.

    ERIC Educational Resources Information Center

    Whittington, M. Susie, Ed.; And Others

    1994-01-01

    Includes "Next Best Thing to Being There" (Whittington); "Taking the Distance out of Distance Education" (Miller, King); "Preparing a Course for Distance Delivery" (Newcomb); "Team Teaching via Two-Way Interactive Video" (Nichols, Trout); "Using the Ag Ed Network" (Peal); "Student's Perspective" (Schoellhorn); "Need for Instruction in Agriculture…

  6. Going the Distance

    ERIC Educational Resources Information Center

    Waters, John K.

    2012-01-01

    Whoever said "Distance education begins in the 10th row" was taking a jab at the comatose kids at the back of his classroom, but the comment also taps into the old image of distance learners as disengaged themselves. That was then. Today, distance-learning programs are booming, in part due to demographic realities but also because recent advances…

  7. Making Distance Education Borderless.

    ERIC Educational Resources Information Center

    Srisa-An, Wichit

    1997-01-01

    Begins with a tribute to Professor G. Ram Reddy (founder of Indira Gandhi National Open University), then focuses on enhancing the role of open universities in providing borderless distance education. Highlights include the need for open distance-education; philosophy and vision; the distance teaching system; the role of information technology;…

  8. Travel Demand Modeling

    SciTech Connect

    Southworth, Frank; Garrow, Dr. Laurie

    2011-01-01

    This chapter describes the principal types of both passenger and freight demand models in use today, providing a brief history of model development supported by references to a number of popular texts on the subject, and directing the reader to papers covering some of the more recent technical developments in the area. Over the past half century a variety of methods have been used to estimate and forecast travel demands, drawing concepts from economic/utility maximization theory, transportation system optimization and spatial interaction theory, using and often combining solution techniques as varied as Box-Jenkins methods, non-linear multivariate regression, non-linear mathematical programming, and agent-based microsimulation.

  9. Middleware Solutions for Self-organizing Multi-hop Multi-path Internet Connectivity Based on Bluetooth

    NASA Astrophysics Data System (ADS)

    Bellavista, Paolo; Giannelli, Carlo

    The availability of heterogeneous wireless interfaces and of growing computing resources on widespread portable devices pushes for enabling innovative deployment scenarios where mobile nodes dynamically self-organize to offer Internet connectivity to their peers via dynamically established multi-hop multi-path opportunities. We claim the suitability of novel, mobility-aware, and application-layer middleware based on lightweight evaluation indicators to support the complexity of that scenario, involving heterogeneous wireless technologies over differentiated and statically unpredictable execution environments. To validate these claims, we have implemented an innovative middleware that manages the durability/throughput-aware formation and selection of different multi-hop paths simultaneously. This paper specifically focuses on how our middleware effectively exploits Bluetooth for multi-hop multi-path networking, by pointing out the crucial role of i) compliance with standard solutions to favor rapid deployment over off-the-shelf equipment and ii) the reduction of the usual overhead associated with some expensive Bluetooth operations, e.g., device inquiry. In particular, the paper shows how it is possible, on the one hand, to extend JSR-82 to portably access monitoring indicators for lightweight mobility/throughput estimations and, on the other hand, to reduce the time needed to update the set of available Bluetooth-based connectivity opportunities via approximated and lightweight forms of discovery.

  10. Analysis of BeiDou Satellite Measurements with Code Multipath and Geometry-Free Ionosphere-Free Combinations

    PubMed Central

    Zhao, Qile; Wang, Guangxing; Liu, Zhizhao; Hu, Zhigang; Dai, Zhiqiang; Liu, Jingnan

    2016-01-01

    Using GNSS observable from some stations in the Asia-Pacific area, the carrier-to-noise ratio (CNR) and multipath combinations of BeiDou Navigation Satellite System (BDS), as well as their variations with time and/or elevation were investigated and compared with those of GPS and Galileo. Provided the same elevation, the CNR of B1 observables is the lowest among the three BDS frequencies, while B3 is the highest. The code multipath combinations of BDS inclined geosynchronous orbit (IGSO) and medium Earth orbit (MEO) satellites are remarkably correlated with elevation, and the systematic “V” shape trends could be eliminated through between-station-differencing or modeling correction. Daily periodicity was found in the geometry-free ionosphere-free (GFIF) combinations of both BDS geostationary Earth orbit (GEO) and IGSO satellites. The variation range of carrier phase GFIF combinations of GEO satellites is −2.0 to 2.0 cm. The periodicity of carrier phase GFIF combination could be significantly mitigated through between-station differencing. Carrier phase GFIF combinations of BDS GEO and IGSO satellites might also contain delays related to satellites. Cross-correlation suggests that the GFIF combinations’ time series of some GEO satellites might vary according to their relative geometries with the sun. PMID:26805831

  11. Passive ranging errors due to multipath distortion of deterministic transient signals with application to the localization of small arms fire

    NASA Astrophysics Data System (ADS)

    Ferguson, Brian G.; Lo, Kam W.

    2002-01-01

    A passive ranging technique based on wavefront curvature is used to estimate the ranges and bearings of impulsive sound sources represented by small arms fire. The discharge of a firearm results in the generation of a transient acoustic signal whose energy propagates radially outwards from the omnidirectional source. The radius of curvature of the spherical wavefront at any instant is equal to the instantaneous range from the source. The curvature of the acoustic wavefront is sensed with a three-microphone linear array by first estimating the differential time of arrival (or time delay) of the acoustic wavefront at each of the two adjacent sensor pairs and then processing the time-delay information to extract the range and bearing of the source. However, modeling the passive ranging performance of the wavefront curvature method for a deterministic transient signal source in a multipath environment shows that when the multipath and direct path arrivals are unresolvable, the time-delay estimates are biased which, in turn, biases the range estimates. The model explains the observed under-ranging of small arms firing positions during a field experiment.

  12. Passive ranging errors due to multipath distortion of deterministic transient signals with application to the localization of small arms fire.

    PubMed

    Ferguson, Brian G; Lo, Kam W

    2002-01-01

    A passive ranging technique based on wavefront curvature is used to estimate the ranges and bearings of impulsive sound sources represented by small arms fire. The discharge of a firearm results in the generation of a transient acoustic signal whose energy propagates radially outwards from the omnidirectional source. The radius of curvature of the spherical wavefront at any instant is equal to the instantaneous range from the source. The curvature of the acoustic wavefront is sensed with a three-microphone linear array by first estimating the differential time of arrival (or time delay) of the acoustic wavefront at each of the two adjacent sensor pairs and then processing the time-delay information to extract the range and bearing of the source. However, modeling the passive ranging performance of the wavefront curvature method for a deterministic transient signal source in a multipath environment shows that when the multipath and direct path arrivals are unresolvable, the time-delay estimates are biased which, in turn, biases the range estimates. The model explains the observed under-ranging of small arms firing positions during a field experiment.

  13. Analysis of BeiDou Satellite Measurements with Code Multipath and Geometry-Free Ionosphere-Free Combinations.

    PubMed

    Zhao, Qile; Wang, Guangxing; Liu, Zhizhao; Hu, Zhigang; Dai, Zhiqiang; Liu, Jingnan

    2016-01-20

    Using GNSS observable from some stations in the Asia-Pacific area, the carrier-to-noise ratio (CNR) and multipath combinations of BeiDou Navigation Satellite System (BDS), as well as their variations with time and/or elevation were investigated and compared with those of GPS and Galileo. Provided the same elevation, the CNR of B1 observables is the lowest among the three BDS frequencies, while B3 is the highest. The code multipath combinations of BDS inclined geosynchronous orbit (IGSO) and medium Earth orbit (MEO) satellites are remarkably correlated with elevation, and the systematic "V" shape trends could be eliminated through between-station-differencing or modeling correction. Daily periodicity was found in the geometry-free ionosphere-free (GFIF) combinations of both BDS geostationary Earth orbit (GEO) and IGSO satellites. The variation range of carrier phase GFIF combinations of GEO satellites is -2.0 to 2.0 cm. The periodicity of carrier phase GFIF combination could be significantly mitigated through between-station differencing. Carrier phase GFIF combinations of BDS GEO and IGSO satellites might also contain delays related to satellites. Cross-correlation suggests that the GFIF combinations' time series of some GEO satellites might vary according to their relative geometries with the sun.

  14. Source localization of narrow band signals in multipath environments, with application to marine mammals

    NASA Astrophysics Data System (ADS)

    Valtierra, Robert Daniel

    Passive acoustic localization has benefited from many major developments and has become an increasingly important focus point in marine mammal research. Several challenges still remain. This work seeks to address several of these challenges such as tracking the calling depths of baleen whales. In this work, data from an array of widely spaced Marine Acoustic Recording Units (MARUs) was used to achieve three dimensional localization by combining the methods Time Difference of Arrival (TDOA) and Direct-Reflected Time Difference of Arrival (DRTD) along with a newly developed autocorrelation technique. TDOA was applied to data for two dimensional (latitude and longitude) localization and depth was resolved using DRTD. Previously, DRTD had been limited to pulsed broadband signals, such as sperm whale or dolphin echolocation, where individual direct and reflected signals are separated in time. Due to the length of typical baleen whale vocalizations, individual multipath signal arrivals can overlap making time differences of arrival difficult to resolve. This problem can be solved using an autocorrelation, which can extract reflection information from overlapping signals. To establish this technique, a derivation was made to model the autocorrelation of a direct signal and its overlapping reflection. The model was exploited to derive performance limits allowing for prediction of the minimum resolvable direct-reflected time difference for a known signal type. The dependence on signal parameters (sweep rate, call duration) was also investigated. The model was then verified using both recorded and simulated data from two analysis cases for North Atlantic right whales (NARWs, Eubalaena glacialis) and humpback whales (Megaptera noveaengliae). The newly developed autocorrelation technique was then combined with DRTD and tested using data from playback transmissions to localize an acoustic transducer at a known depth and location. The combined DRTD-autocorrelation methods

  15. Adjunct Faculty as Key Stakeholders in Distance Education

    ERIC Educational Resources Information Center

    Ridge, Alison; Ritt, Elizabeth

    2017-01-01

    Institutions of higher learning are expanding their academic reach by offering distance education courses and degree programs. Student demand for distance education continues to grow and so does the need for qualified faculty. The literature presents numerous approaches and best practices regarding new faculty orientation and professional…

  16. Distance Education and Foreign Languages. NFLC Occasional Paper [Number 9].

    ERIC Educational Resources Information Center

    Lambert, Richard D.

    Distance education in second languages in the United States has grown in a piecemeal, uncoordinated fashion, and it remains marginal to both distance education more generally and to the bulk of foreign language instruction throughout the country. One handicap, arising from very limited demand in business for foreign language skills, is lack of…

  17. Cultural Impacts on Distance Learning, Online Learning Styles, and Design

    ERIC Educational Resources Information Center

    Alalshaikh, Sultan

    2015-01-01

    This article focuses on the multicultural nature of distance learners. To note, the heightened demand for higher education on a global scale, as well as rapid advancements in telecommunication technologies, have rendered online distance education as having potential for worldwide reach online schools in many countries. Because of this, online…

  18. Variables Related to Undergraduate Students Preference for Distance Education Classes

    ERIC Educational Resources Information Center

    Pontes, Manuel C. F.; Hasit, Cindi; Pontes, Nancy M. H.; Lewis, Phillip A.; Siefring, Karen T.

    2010-01-01

    The purpose of this research is to identify student-specific characteristics that are related to students' preference for distance education courses. Since distance education courses provide students with more convenient and flexible class schedules, they should be preferred by students who have a greater number of competing demands, such as work…

  19. Demanding Divestment from Sudan

    ERIC Educational Resources Information Center

    Asquith, Christina

    2006-01-01

    Bowing to student demands to "stop supporting genocide," the University of California regents voted earlier this year to divest millions of dollars from companies working in the war-torn African nation of Sudan, the first major public university in the nation to take such action. Since student protests on the subject began at Harvard…

  20. 1985 Employment Outlook: Demand.

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1984

    1984-01-01

    Findings from an American Chemical Society survey show that the pessimism that characterized the job market in 1983 has given way to a much brighter outlook as employers hire more chemists and chemical engineers. Data from the survey on the supply and demand of chemical professionals are provided and discussed. (JN)

  1. Demands for School Leaders

    ERIC Educational Resources Information Center

    Bradley-Levine, Jill

    2016-01-01

    This article examines the ways that graduate courses in teacher leadership influenced the ways that teachers described the nature of leadership and their role as educational leaders. Using Foster's (1989) four demands for school leaders as a theoretical framework, participants' perceptions are examined to determine how teachers synthesized their…

  2. Demanding Divestment from Sudan

    ERIC Educational Resources Information Center

    Asquith, Christina

    2006-01-01

    Bowing to student demands to "stop supporting genocide," the University of California regents voted earlier this year to divest millions of dollars from companies working in the war-torn African nation of Sudan, the first major public university in the nation to take such action. Since student protests on the subject began at Harvard…

  3. Textbook Factor Demand Curves.

    ERIC Educational Resources Information Center

    Davis, Joe C.

    1994-01-01

    Maintains that teachers and textbook graphics follow the same basic pattern in illustrating changes in demand curves when product prices increase. Asserts that the use of computer graphics will enable teachers to be more precise in their graphic presentation of price elasticity. (CFR)

  4. Textbook Factor Demand Curves.

    ERIC Educational Resources Information Center

    Davis, Joe C.

    1994-01-01

    Maintains that teachers and textbook graphics follow the same basic pattern in illustrating changes in demand curves when product prices increase. Asserts that the use of computer graphics will enable teachers to be more precise in their graphic presentation of price elasticity. (CFR)

  5. Maximum spectral demands in the near-fault region

    USGS Publications Warehouse

    Huang, Yin-Nan; Whittaker, Andrew S.; Luco, Nicolas

    2008-01-01

    The Next Generation Attenuation (NGA) relationships for shallow crustal earthquakes in the western United States predict a rotated geometric mean of horizontal spectral demand, termed GMRotI50, and not maximum spectral demand. Differences between strike-normal, strike-parallel, geometric-mean, and maximum spectral demands in the near-fault region are investigated using 147 pairs of records selected from the NGA strong motion database. The selected records are for earthquakes with moment magnitude greater than 6.5 and for closest site-to-fault distance less than 15 km. Ratios of maximum spectral demand to NGA-predicted GMRotI50 for each pair of ground motions are presented. The ratio shows a clear dependence on period and the Somerville directivity parameters. Maximum demands can substantially exceed NGA-predicted GMRotI50 demands in the near-fault region, which has significant implications for seismic design, seismic performance assessment, and the next-generation seismic design maps. Strike-normal spectral demands are a significantly unconservative surrogate for maximum spectral demands for closest distance greater than 3 to 5 km. Scale factors that transform NGA-predicted GMRotI50 to a maximum spectral demand in the near-fault region are proposed.

  6. Maximum spectral demands in the near-fault region

    USGS Publications Warehouse

    Huang, Y.-N.; Whittaker, A.S.; Luco, N.

    2008-01-01

    The Next Generation Attenuation (NGA) relationships for shallow crustal earthquakes in the western United States predict a rotated geometric mean of horizontal spectral demand, termed GMRotI50, and not maximum spectral demand. Differences between strike-normal, strike-parallel, geometric-mean, and maximum spectral demands in the near-fault region are investigated using 147 pairs of records selected from the NGA strong motion database. The selected records are for earthquakes with moment magnitude greater than 6.5 and for closest site-to-fault distance less than 15 km. Ratios of maximum spectral demand to NGA-predicted GMRotI50 for each pair of ground motions are presented. The ratio shows a clear dependence on period and the Somerville directivity parameters. Maximum demands can substantially exceed NGA-predicted GMRotI50 demands in the near-fault region, which has significant implications for seismic design, seismic performance assessment, and the next-generation seismic design maps. Strike-normal spectral demands are a significantly unconservative surrogate for maximum spectral demands for closest distance greater than 3 to 5 km. Scale factors that transform NGA-predicted GMRotI50 to a maximum spectral demand in the near-fault region are proposed. ?? 2008, Earthquake Engineering Research Institute.

  7. Visual demands in modern Australian primary school classrooms.

    PubMed

    Narayanasamy, Sumithira; Vincent, Stephen J; Sampson, Geoff P; Wood, Joanne M

    2016-05-01

    The visual demands of modern classrooms are poorly understood yet are relevant in determining the levels of visual function required to perform optimally within this environment. Thirty-three Year 5 and 6 classrooms from eight south-east Queensland schools were included. Classroom activities undertaken during a full school day (9 am to 3 pm) were observed and a range of measurements recorded, including classroom environment (physical dimensions, illumination levels), text size and contrast of learning materials, habitual working distances (distance and estimated for near) and time spent performing various classroom tasks. These measures were used to calculate demand-related minimum criteria for distance and near visual acuity, contrast and sustained use of accommodation and vergence. The visual acuity demands for distance and near were 0.33 ± 0.13 and 0.72 ± 0.09 logMAR, respectively (using habitual viewing distances and smallest target sizes) or 0.33 ± 0.09 logMAR assuming a 2.5 times acuity reserve for sustained near tasks. The mean contrast levels of learning materials at distance and near were greater than 70 per cent. Near tasks (47 per cent) dominated the academic tasks performed in the classroom followed by distance (29 per cent), distance to near (15 per cent) and computer-based (nine per cent). On average, children engaged in continuous near fixation for 23 ± 5 minutes at a time and during distance-near tasks performed fixation changes 10 ± 1 times per minute. The mean estimated habitual near working distance was 23 ± 1 cm (4.38 ± 0.24 D accommodative demand) and the vergence demand was 0.86 ± 0.07(Δ) at distance and 21.94 ± 1.09(Δ) at near assuming an average pupillary distance of 56 mm. Relatively high levels of visual acuity, contrast demand and sustained accommodative-convergence responses are required to meet the requirements of modern classroom environments. These findings provide an evidence base

  8. The Extragalactic Distance Scale

    NASA Astrophysics Data System (ADS)

    Livio, Mario; Donahue, Megan; Panagia, Nino

    1997-07-01

    Participants; Preface; Foreword; Early history of the distance scale problem, S. van den Bergh; Cosmology: From Hubble to HST, M. S. Turner; Age constraints nucleocosmochronology, J. Truran; The ages of globular clusters, P. Demarque; The linearity of the Hubble flow M. Postman; Gravitational lensing and the extragalactic distance scale, R. D. Blandford andT . Kundic; Using the cosmic microwave background to constrain the Hubble constant A. Lasenby and T M. Jones; Cepheids as distance indicators, N. R. Tanvir; The I-band Tully-Fisher relation and the Hubble constant, R. Giovanell; The calibration of type 1a supernovae as standard candles, A. Saha; Focusing in on the Hubble constant, G. A. Tammann & M. Federspiel; Interim report on the calibration of the Tully-Fisher relation in the HST Key Project to measure the Hubble constant, J. Mould et al.; Hubble Space Telescope Key Project on the extragalactic distance scale, W. L. Freedman, B. F. Madore and T R. C. Kennicutt; Novae as distance indicators, M. Livio; Verifying the planetary nebula luminosity function method, G. H. Jacoby; On the possible use of radio supernovae for distance determinations, K. W. Weiler et al.; Post-AGB stars as standard candles, H. Bond; Helium core flash at the tip of the red giant branch: a population II distance indicator, B. F. Madore, W. L. Freedman and T S. Sakai; Globular clusters as distance indicators, B. C. Whitmore; Detached eclipsing binaries as primary distance and age indicators, B. Paczynski; Light echoes: geometric measurement of galaxy distances, W. B. Sparks; The SBF survey of galaxy distances J. L. Tonry; Extragalactic distance scales: The long and short of it, V. Trimble.

  9. Scalable Parallel Distance Field Construction for Large-Scale Applications.

    PubMed

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan-Liu; Kolla, Hemanth; Chen, Jacqueline H

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. A new distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking over time, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate its efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. Our work greatly extends the usability of distance fields for demanding applications.

  10. Scalable parallel distance field construction for large-scale applications

    SciTech Connect

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan -Liu; Kolla, Hemanth; Chen, Jacqueline H.

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. Anew distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking overtime, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate its efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. In conclusion, our work greatly extends the usability of distance fields for demanding applications.

  11. Estimation of the Potential Interference Immunity of Radio Reception with Spatial Signal Processing in Multipath Radio-Communication Channels. I. Decameter Range

    NASA Astrophysics Data System (ADS)

    Metelev, S. A.; Lvov, A. V.

    2016-09-01

    We propose a method for estimating potential interference immunity of radio reception in the multipath radio-communication channels. Using this method for the modified Watterson model of the decameter radio channel, we study the achievable interference immunity of devices with spatial signal processing.

  12. Customer premises services market demand assessment 1980 - 2000. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    Gamble, R. B.; Saporta, L.; Heidenrich, G. A.

    1983-01-01

    Estimates of market demand for domestic civilian telecommunications services for the years 1980 to 2000 are provided. Overall demand, demand or satellite services, demand for satellite delivered Customer Premises Service (CPS), and demand for 30/20 GHz Customer Premises Services are covered. Emphasis is placed on the CPS market and demand is segmented by market, by service, by user class and by geographic region. Prices for competing services are discussed and the distribution of traffic with respect to distance is estimated. A nationwide traffic distribution model for CPS in terms of demand for CPS traffic and earth stations for each of the major SMSAs in the United States are provided.

  13. Demand surge following earthquakes

    USGS Publications Warehouse

    Olsen, Anna H.

    2012-01-01

    Demand surge is understood to be a socio-economic phenomenon where repair costs for the same damage are higher after large- versus small-scale natural disasters. It has reportedly increased monetary losses by 20 to 50%. In previous work, a model for the increased costs of reconstruction labor and materials was developed for hurricanes in the Southeast United States. The model showed that labor cost increases, rather than the material component, drove the total repair cost increases, and this finding could be extended to earthquakes. A study of past large-scale disasters suggested that there may be additional explanations for demand surge. Two such explanations specific to earthquakes are the exclusion of insurance coverage for earthquake damage and possible concurrent causation of damage from an earthquake followed by fire or tsunami. Additional research into these aspects might provide a better explanation for increased monetary losses after large- vs. small-scale earthquakes.

  14. Biomechanics of Distance Running.

    ERIC Educational Resources Information Center

    Cavanagh, Peter R., Ed.

    Contributions from researchers in the field of running mechanics are included in the 13 chapters of this book. The following topics are covered: (1) "The Mechanics of Distance Running: A Historical Perspective" (Peter Cavanagh); (2) "Stride Length in Distance Running: Velocity, Body Dimensions, and Added Mass Effects" (Peter Cavanagh, Rodger…

  15. Distance Perception within Europe.

    ERIC Educational Resources Information Center

    Eysberg, Cees D.

    1985-01-01

    A distance perception survey was used to get college students enrolled in a human geography course involved and interested in the topic of perception. Students were asked to arrange 12 European capitals in sequence according to their distance from Amsterdam. Survey results are presented. (RM)

  16. A Distance Education Exemption?

    ERIC Educational Resources Information Center

    Salomon, Kenneth D.

    1999-01-01

    Discusses the U.S. Copyright Office's May 25, 1999 Report on Copyright and Digital Distance Education. Presents the Register of Copyrights' recommendations to Congress as to how to "promote distance education through networks, while maintaining an appropriate balance between the rights of copyright owners and the needs of users of copyrighted…

  17. Distance Education in Entwicklungslandern.

    ERIC Educational Resources Information Center

    German Foundation for International Development, Bonn (West Germany).

    Seminar and conference reports and working papers on distance education of adults, which reflect the experiences of many countries, are presented. Contents include the draft report of the 1979 International Seminar on Distance Education held in Addis Ababa, Ethiopia, which was jointly sponsored by the United Nations Economic Commission for Africa…

  18. Distance, Education and Inequality

    ERIC Educational Resources Information Center

    Hamnett, Chris; Butler, Tim

    2013-01-01

    In this paper we examine the role which distance, in a variety of forms, can play in the reproduction, intensification or reduction of educational inequality in different types of school systems in different countries. This is a very broad issue, and in the paper we examine the ways in which distance to school has emerged as an important factor in…

  19. Biomechanics of Distance Running.

    ERIC Educational Resources Information Center

    Cavanagh, Peter R., Ed.

    Contributions from researchers in the field of running mechanics are included in the 13 chapters of this book. The following topics are covered: (1) "The Mechanics of Distance Running: A Historical Perspective" (Peter Cavanagh); (2) "Stride Length in Distance Running: Velocity, Body Dimensions, and Added Mass Effects" (Peter Cavanagh, Rodger…

  20. "Distance Education for Newbies".

    ERIC Educational Resources Information Center

    Lennex, Lesia C.

    This paper discusses the effectiveness of distance education at Morehead State University. Distance education, which operates via fiber optic telecommunications, has been delivered to as many as 18 sites. Twenty-three faculty and 622 students have participated in this program. The technologies used to present information include full motion video…

  1. Gender and Distance Learning.

    ERIC Educational Resources Information Center

    Brunner, Cornelia

    This article examines distance learning from a gender perspective. In any new area of enterprise, expectations have an important effect on planning, implementation, and evaluation. When it comes to distance learning, a variety of images of what this exciting new technology will look like and what it can empower us to achieve will determine how we…

  2. Education at a Distance.

    ERIC Educational Resources Information Center

    Maffett, Sheryl Price

    2007-01-01

    Distance learning has been around since the old "course in a box" correspondence classes, but with the advent of sophisticated online course management systems, learning at a distance is contributing to a major paradigm shift in higher education. That shift includes applying corporate concepts to education--students, for example, are "consumers,"…

  3. Technology and Distance Education.

    ERIC Educational Resources Information Center

    Lumsden, Bruce; And Others

    The impact of the computer on education may be greater than the impact of any other technological innovation since the development of the printing press. Although distance education has relied more extensively on technological means for delivering education to its students than has traditional classroom-centered education, most distance programs…

  4. Distance Education in Entwicklungslandern.

    ERIC Educational Resources Information Center

    German Foundation for International Development, Bonn (West Germany).

    Seminar and conference reports and working papers on distance education of adults, which reflect the experiences of many countries, are presented. Contents include the draft report of the 1979 International Seminar on Distance Education held in Addis Ababa, Ethiopia, which was jointly sponsored by the United Nations Economic Commission for Africa…

  5. Estimating distances from parallaxes

    NASA Astrophysics Data System (ADS)

    Astraatmadja, Tri L.; Bailer-Jones, Coryn

    2017-01-01

    In astrometric surveys such as Gaia and LSST, parallaxes will be measured for about a billion stars, but zero distances will be measured. Distances must be inferred from the parallaxes, and the common inference practice is by inverting the parallax. This, however, is only appropriate when there is no noise present. As noise will always be present and most stars in future surveys will have non-negligible fractional parallax uncertainties, we must treat distance estimation as an inference problem. The usage of prior assumptions become unavoidable. In this talk I will present a method on how to infer distances using Bayesian inference. Three minimalists, isotropic priors are used, as well an anisotropic prior derived from the observability of stars in a Milky Way model. The performance of these priors are investigated using a simulated Gaia-like catalogue. Recent results of distance estimation using the parallaxes of 2 million Gaia DR1 stars will also be discussed.

  6. Delay and throughput characteristics of TH, CDMA, TDMA, and hybrid networks for multipath faded data transmission channels

    NASA Astrophysics Data System (ADS)

    Elhakeem, Ahmed K.; Digirolamo, Rocco; Bdira, Ilyess B.; Talla, M.

    1994-05-01

    The new concepts of adaptive time hopping and variable frame Code Division (CDMA) Multiple Access are introduced. By a unified analysis, the probabilities of bit and packet errors in multipath fading environment for five Time Division (TDMA), Code Division, and Time Hopping (TH) related multiaccess networks are obtained; namely, TDMA, CDMA, CDMA/TDMA, Adaptive CDMA/TH, and variable frame CDMA/TDMA networks. The delay and useful throughputs of the five systems are also evaluated for data and voice traffic. All systems compared have the same channel power and bandwidth and support the same traffic. Though implementation issues are not covered, CDMA systems are put at a disadvantage (compared to cellular-type FDMA networks, for example) by ignoring such inherent advantages as voice silence utilizations and automatic frequency reuse. Nonetheless, two CDMA systems outperform TDMA systems at low and medium input traffics.

  7. Measurements and modeling of multipath interference at wavelengths below cable cut-off in a G.654 optical fiber span.

    PubMed

    Downie, John D; Hurley, Jason; DePedro, Hector; Garner, Steven; Blaker, Jeremy; Zakharian, Aramais; Ten, Sergey; Mills, Greg

    2017-04-17

    Transmission below the cable cut-off wavelength may be a concern in some systems, especially for an optical supervisory channel (OSC) operating below the signal transmission band in systems built with G.654 fiber. In this work, we constructed a cabled span of G.654-compliant fiber and measured the multipath interference (MPI) generated during propagation through the span at a range of wavelengths below the cable cut-offs of the constituent fibers. Measurements were made under a range of conditions including different splice losses and the presence or absence of higher order mode filters placed around the splices. MPI levels were found to be sufficiently low at wavelengths far below the average cable cut-off such that OSC transmission was penalty-free. We compare the experimental results to modeling predictions and find very good agreement.

  8. Calling depths of baleen whales from single sensor data: development of an autocorrelation method using multipath localization.

    PubMed

    Valtierra, Robert D; Glynn Holt, R; Cholewiak, Danielle; Van Parijs, Sofie M

    2013-09-01

    Multipath localization techniques have not previously been applied to baleen whale vocalizations due to difficulties in application to tonal vocalizations. Here it is shown that an autocorrelation method coupled with the direct reflected time difference of arrival localization technique can successfully resolve location information. A derivation was made to model the autocorrelation of a direct signal and its overlapping reflections to illustrate that an autocorrelation may be used to extract reflection information from longer duration signals containing a frequency sweep, such as some calls produced by baleen whales. An analysis was performed to characterize the difference in behavior of the autocorrelation when applied to call types with varying parameters (sweep rate, call duration). The method's feasibility was tested using data from playback transmissions to localize an acoustic transducer at a known depth and location. The method was then used to estimate the depth and range of a single North Atlantic right whale (Eubalaena glacialis) and humpback whale (Megaptera novaeangliae) from two separate experiments.

  9. An independent review of the Multi-Path Redundant Avionics Suite (MPRAS) architecture assessment and characterization report

    SciTech Connect

    Johnson, M.R.

    1991-02-01

    In recent years the NASA Langley Research Center has funded several contractors to conduct conceptual designs defining architectures for fault tolerant computer systems. Such a system is referred to as a Multi-Path Redundant Avionics Suite (MPRAS), and would form the basis for avionics systems that would be used in future families of space vehicles in a variety of missions. The principal contractors were General Dynamics, Boeing, and Draper Laboratories. These contractors participated in a series of review meetings, and submitted final reports defining their candidate architectures. NASA then commissioned the Research Triangle Institute (RTI) to perform an assessment of these architectures to identify strengths and weaknesses of each. This report is a separate, independent review of the RTI assessment, done primarily to assure that the assessment was comprehensive and objective. The report also includes general recommendations relative to further MPRAS development.

  10. Galactic Distance Scales

    NASA Astrophysics Data System (ADS)

    Feast, Michael W.

    This chapter begins with a discussion of the basic methods of determining astronomical distances, particularly, trigonometrical, statistical, and pulsational parallaxes. It then summarizes the current state of the calibration of various classes of pulsating variables (Classical Cepheids, type-II Cepheids, RR Lyraes, Miras, and δ Sct and SX Phe stars). Work on other distance indicators (e.g., the red giant clump and the tip of the red giant branch) is also summarized. The use of spectroscopic parallaxes and their application to supergiants and common stars as well as the methods of determining the distances to open and globular clusters are discussed. To illustrate and compare different distance indicators, their use in estimating the scale length of our Galaxy, and the distance to Galactic centre as well as the distances to the LMC, the Fornax dwarf spheroidal, and the spiral galaxy NGC4258 is discussed in some detail. An appendix summarizes some common bias problems that arise in the calibration and use of distance indicators.

  11. Oxide nanoelectronics on demand.

    PubMed

    Cen, Cheng; Thiel, Stefan; Mannhart, Jochen; Levy, Jeremy

    2009-02-20

    Electronic confinement at nanoscale dimensions remains a central means of science and technology. We demonstrate nanoscale lateral confinement of a quasi-two-dimensional electron gas at a lanthanum aluminate-strontium titanate interface. Control of this confinement using an atomic force microscope lithography technique enabled us to create tunnel junctions and field-effect transistors with characteristic dimensions as small as 2 nanometers. These electronic devices can be modified or erased without the need for complex lithographic procedures. Our on-demand nanoelectronics fabrication platform has the potential for widespread technological application.

  12. Dividends with Demand Response

    SciTech Connect

    Kintner-Meyer, Michael CW; Goldman, Charles; Sezgen, O.; Pratt, D.

    2003-10-31

    To assist facility managers in assessing whether and to what extent they should participate in demand response programs offered by ISOs, we introduce a systematic process by which a curtailment supply curve can be developed that integrates costs and other program provisions and features. This curtailment supply curve functions as bid curve, which allows the facility manager to incrementally offer load to the market under terms and conditions acceptable to the customer. We applied this load curtailment assessment process to a stylized example of an office building, using programs offered by NYISO to provide detail and realism.

  13. Mortality risk increases with natal dispersal distance in American martens.

    PubMed

    Johnson, Cheryl A; Fryxell, John M; Thompson, Ian D; Baker, James A

    2009-09-22

    The assumption that mortality risk increases with dispersal distance has rarely been tested. We compared patterns of natal dispersal in the American marten (Martes americana) between a large regenerating forest landscape and an uncut landscape that was dominated by more mature forest to test whether mortality risk increased with dispersal distance, and whether variation in mortality risk influenced dispersal distance. Mortality risk increased with dispersal distance in both landscape treatments, but the distance-dependent increase in mortality in the regenerating landscape was twice that in the uncut landscape. Differences in body condition, supported by other data on foraging efficiency, suggested that juveniles from the regenerating landscape were less able to cope with the energetic demands of dispersal compared with juveniles from older forests. Juveniles travelled shorter distances in the regenerating versus uncut landscape. These results implied that dispersal was costly in terms of juvenile survival and that mean dispersal distance was shaped, in part, by mortality risk.

  14. Geodetic distance measuring apparatus

    NASA Astrophysics Data System (ADS)

    Abshire, J. B.

    1980-12-01

    A geodetic distance measuring apparatus which compensates for the refractive index of the atmosphere is discussed. A mode locked laser system with a laser device and its peripheral components is utilized to derive two mutually phase locked optical wavelength signals and one phase locked microwave CW signal which respectively traverse the same distance measurement path. The optical signals are comprised of pulse type signals. Phase comparison of the two optical wavelength pulse signals is used to provide the dry air density while phase comparison of one of the optical wavelength pulse signals and the microwave CW signal issued to provide wet or water vapor density of the air. The distance to be measured corrected for the atmospheric dry air and water vapor densities in the measurement path is computed from these measurements. A time interval unit is included for measuring transit time of individual optical pulses for resolving the phase ambiguity needed with the phase measurements to give the true target distance.

  15. Technology and Distance Education.

    ERIC Educational Resources Information Center

    Pelton, J. N.; Bates, A. W.

    1991-01-01

    Two articles evaluate the impact of new transmission and information technologies on education: "Technology and Education--Friend or Foe?" (Pelton) and "Third Generation Distance Education: The Challenge of New Technology" (Bates). (SK)

  16. Learning Pullback HMM Distances.

    PubMed

    Cuzzolin, Fabio; Sapienza, Michael

    2014-07-01

    Recent work in action recognition has exposed the limitations of methods which directly classify local features extracted from spatio-temporal video volumes. In opposition, encoding the actions' dynamics via generative dynamical models has a number of attractive features: however, using all-purpose distances for their classification does not necessarily deliver good results. We propose a general framework for learning distance functions for generative dynamical models, given a training set of labelled videos. The optimal distance function is selected among a family of pullback ones, induced by a parametrised automorphism of the space of models. We focus here on hidden Markov models and their model space, and design an appropriate automorphism there. Experimental results are presented which show how pullback learning greatly improves action recognition performances with respect to base distances.

  17. Distance to Dark Bodies

    NASA Image and Video Library

    2007-05-30

    Using the unique orbit of NASA Spitzer Space Telescope and a depth-perceiving trick called parallax, astronomers have determined the distance to an invisible Milky Way object called OGLE-2005-SMC-001.

  18. Distance learning perspectives.

    PubMed

    Pandza, Haris; Masic, Izet

    2013-01-01

    The development of modern technology and the Internet has enabled the explosive growth of distance learning. distance learning is a process that is increasingly present in the world. This is the field of education focused on educating students who are not physically present in the traditional classrooms or student's campus. described as a process where the source of information is separated from the students in space and time. If there are situations that require the physical presence of students, such as when a student is required to physically attend the exam, this is called a hybrid form of distance learning. This technology is increasingly used worldwide. The Internet has become the main communication channel for the development of distance learning.

  19. Automobile Stopping Distances.

    ERIC Educational Resources Information Center

    Logue, L. J.

    1979-01-01

    Discusses the effect of vehicle mass on stopping distances. Analyzes an example of a sample vehicle and tire, and calculates the braking acceleration showing the effect of different factors on the stopping performance of the tires. (GA)

  20. Automobile Stopping Distances.

    ERIC Educational Resources Information Center

    Logue, L. J.

    1979-01-01

    Discusses the effect of vehicle mass on stopping distances. Analyzes an example of a sample vehicle and tire, and calculates the braking acceleration showing the effect of different factors on the stopping performance of the tires. (GA)

  1. Physiological Demands of Flat Horse Racing Jockeys.

    PubMed

    Cullen, SarahJane; OʼLoughlin, Gillian; McGoldrick, Adrian; Smyth, Barry; May, Gregory; Warrington, Giles D

    2015-11-01

    The physiological demands of jockeys during competition remain largely unknown, thereby creating challenges when attempting to prescribe sport-specific nutrition and training guidelines. The purpose of this study was to evaluate the physiological demands and energy requirements of jockeys during flat racing. Oxygen uptake (V[Combining Dot Above]O2) and heart rate (HR) were assessed in 18 male trainee jockeys during a race simulation trial on a mechanical horse racing simulator for the typical time duration to cover a common flat race distance of 1,400 m. In addition, 8 male apprentice jockeys participated in a competitive race, over distances ranging from 1,200 to 1,600 m, during which HR and respiratory rate (RR) were assessed. All participants performed a maximal incremental cycle ergometer test. During the simulated race, peak V[Combining Dot Above]O2 was 42.74 ± 5.6 ml·kg·min (75 ± 11% of V[Combining Dot Above]O2peak) and below the mean ventilatory threshold (81 ± 5% of V[Combining Dot Above]O2peak) reported in the maximal incremental cycle test. Peak HR was 161 ± 16 b·min (86 ± 7% of HRpeak). Energy expenditure was estimated as 92.5 ± 18.8 kJ with an associated value of 9.4 metabolic equivalents. During the competitive race trial, peak HR reached 189 ± 5 b·min (103 ± 4% of HRpeak) and peak RR was 50 ± 7 breaths per minute. Results suggest that horse racing is a physically demanding sport, requiring jockeys to perform close to their physiological limit to be successful. These findings may provide a useful insight when developing sport-specific nutrition and training strategies to optimally equip and prepare jockeys physically for the physiological demands of horse racing.

  2. Non-urban mobile radio market demand forecast

    NASA Technical Reports Server (NTRS)

    Castruccio, P. A.; Cooper, J.

    1982-01-01

    A national nonmetropolitan land mobile traffic model for 1990-2000 addresses user classes, density classes, traffic mix statistics, distance distribution, geographic distribution, price elasticity, and service quality elasticity. Traffic demands for business, special industrial, and police were determined on the basis of surveys in 73 randomly selected nonurban counties. The selected services represent 69% of total demand. The results were extrapolated to all services in the non-SMSA areas of the contiguous United States. Radiotelephone services were considered separately. Total non-SMSA mobile radio demand (one way) estimates are given. General functional requirements include: hand portability, privacy, reduction of blind spots, two way data transmission, position location, slow scan imagery.

  3. Non-urban mobile radio market demand forecast

    NASA Astrophysics Data System (ADS)

    Castruccio, P. A.; Cooper, J.

    1982-06-01

    A national nonmetropolitan land mobile traffic model for 1990-2000 addresses user classes, density classes, traffic mix statistics, distance distribution, geographic distribution, price elasticity, and service quality elasticity. Traffic demands for business, special industrial, and police were determined on the basis of surveys in 73 randomly selected nonurban counties. The selected services represent 69% of total demand. The results were extrapolated to all services in the non-SMSA areas of the contiguous United States. Radiotelephone services were considered separately. Total non-SMSA mobile radio demand (one way) estimates are given. General functional requirements include: hand portability, privacy, reduction of blind spots, two way data transmission, position location, slow scan imagery.

  4. Presence at a distance.

    PubMed

    Haddouk, Lise

    2015-01-01

    Nowadays in the context of the cyberculture, computer-mediated inter-subjective relationships are part of our everyday lives, in both the professional and personal spheres, and for all age groups. In the clinical field, many applications have been developed to facilitate the exchange of informations and mediate the relationship between patient and therapist. In psychology, more or less immersive technologies are used, to encourage the feeling of presence among the users, and to trigger certain psychological processes. In our research, we have explored the remote clinical interview through videoconferencing, with the development and utilisation of the iPSY platform, totally focused on this objective. In this context, we have considered the notion of intersubjectivity, despite the physical absence. This research is leading us today to envision the notions of distance and presence, and possibly to redefine them. Thus, can we still oppose physical distance to psychological distance? Can we still affirm that the physical absence does not permit a psychological co-presence in certain interactions, like this observed in video interviews? The results show that the psychological processes, activated in this context, are similar to those observed in "traditional" clinical consults between the patient and the therapist. However, certain specifics have led us to consider the concept of distance, here influenced by the framework, and to observe its effects. This distance could possibly constitute a therapeutic lever for some patients, notably for those who have difficulties establishing the right psychological distance in their relationships with others. According to these results, can "distance" still be opposed to "presence", or could it be re-defined? This also opens up questions on the more general concept of digital relationships, and the definition of their specificities.

  5. Drafting distance in swimming.

    PubMed

    Chatard, Jean-Claude; Wilson, Barry

    2003-07-01

    This study investigates the effect of the distance separating the lead and draft swimmers on the metabolic and hydrodynamic responses of the draft swimmer. A nondrafting swim of 4 min at 95% of the best 1500-m pace for 11 swimmers was compared with swimming in a drafting position at four different distances directly behind another swimmer (0, 50, 100, and 150 cm). Swimming performance was assessed by stroke rate and stroke length; the metabolic response by oxygen uptake, heart rate, and blood lactate; and the rating of perceived exertion by the Borg scale. Passive drag was assessed at these drafting distances by passive towing. Then, passive drag was measured in six swimmers towed in six lateral drafting positions, with swimmers separated by approximately 40 cm, and then measured in two positions at the rear of the lead swimmer with a reduced lateral distance between swimmers of 50 and 0 cm. Oxygen uptake, heart rate, blood lactate, rating of perceived exertion, and stroke rate were significantly reduced and stroke length was significantly increased in all drafting positions compared with the nondrafting position. For drag, the most advantageous drafting distances were 0 and 50 cm back from the toes of the lead swimmer. Drag was reduced by 21% and 20%, respectively. In lateral drafting, drag was significantly reduced by 6% and 7%, respectively, at 50 and 100 cm back from the hands of the lead swimmer. Swimming behind another swimmer at a distance between 0 and 50 cm back from the toes was the most advantageous, whereas in lateral drafting the optimal distance was 50-100 cm back from the hands of the lead swimmer.

  6. Distance Education: A Cost Analysis.

    ERIC Educational Resources Information Center

    Jones, Judy I.; And Others

    This report provides administrators, school boards, and policymakers with data to help them in the decision making process related to distance education systems. A literature review covers theories of distance education, distance education today, the economics of distance education, distance education and technology, transmission systems, and…

  7. Quality Assurance in Asian Distance Education: Diverse Approaches and Common Culture

    ERIC Educational Resources Information Center

    Jung, Insung; Wong, Tat Meng; Li, Chen; Baigaltugs, Sanjaa; Belawati, Tian

    2011-01-01

    With the phenomenal expansion of distance education in Asia during the past three decades, there has been growing public demand for quality and accountability in distance education. This study investigates the national quality assurance systems for distance education at the higher education level in Asia with the aim of contributing to a better…

  8. Long distance entanglement distribution

    NASA Astrophysics Data System (ADS)

    Broadfoot, Stuart Graham

    Developments in the interdisciplinary field of quantum information open up previously impossible abilities in the realms of information processing and communication. Quantum entanglement has emerged as one property of quantum systems that acts as a resource for quantum information processing and, in particular, enables teleportation and secure cryptography. Therefore, the creation of entangled resources is of key importance for the application of these technologies. Despite a great deal of research the efficient creation of entanglement over long distances is limited by inevitable noise. This problem can be overcome by creating entanglement between nodes in a network and then performing operations to distribute the entanglement over a long distance. This thesis contributes to the field of entanglement distribution within such quantum networks. Entanglement distribution has been extensively studied for one-dimensional networks resulting in "quantum repeater" protocols. However, little work has been done on higher dimensional networks. In these networks a fundamentally different scaling, called "long distance entanglement distribution", can appear between the resources and the distance separating the systems to be entangled. I reveal protocols that enable long distance entanglement distribution for quantum networks composed of mixed state and give a few limitations to the capabilities of entanglement distribution. To aid in the implementation of all entanglement distribution protocols I finish by introducing a new system, composed of an optical nanofibre coupled to a carbon nanotube, that may enable new forms of photo-detectors and quantum memories.

  9. The Cepheid distance scale

    NASA Technical Reports Server (NTRS)

    Madore, Barry F.; Freedman, Wendy L.

    1991-01-01

    Developments concerning the period-luminosity (PL) relation for classical Cepheids are discussed with particular emphasis on the fact that Cepheids continue to provide the most homogeneous and reliable set of distances to many nearby galaxies. Observational programs relating to extragalactic Cepheids are also reviewed, and new distances and reddenings to individual galaxies are determined from these data using multiwavelength PL relations, based for the first time on self-consistent calibrating data sets. Three recent promising secondary extragalactic distance indicators (Tully-Fisher, planetary nebula luminosity functions, and surface-brightness fluctuations) tie their zero points to the Cepheid distance scale and give globally consistent values for the Hubble constant of about 80 km/sec/Mpc. Tying the Faber-Jackson relation and the supernova distance scales to the Leo and Virgo clusters yields similar results. Such a value for the Hubble constant is marginally inconsistent with new estimates of the ages of globular clusters, and it may prove to be a serious problem for standard cold-dark-matter models of the universe.

  10. Optimal flight initiation distance.

    PubMed

    Cooper, William E; Frederick, William G

    2007-01-07

    Decisions regarding flight initiation distance have received scant theoretical attention. A graphical model by Ydenberg and Dill (1986. The economics of fleeing from predators. Adv. Stud. Behav. 16, 229-249) that has guided research for the past 20 years specifies when escape begins. In the model, a prey detects a predator, monitors its approach until costs of escape and of remaining are equal, and then flees. The distance between predator and prey when escape is initiated (approach distance = flight initiation distance) occurs where decreasing cost of remaining and increasing cost of fleeing intersect. We argue that prey fleeing as predicted cannot maximize fitness because the best prey can do is break even during an encounter. We develop two optimality models, one applying when all expected future contribution to fitness (residual reproductive value) is lost if the prey dies, the other when any fitness gained (increase in expected RRV) during the encounter is retained after death. Both models predict optimal flight initiation distance from initial expected fitness, benefits obtainable during encounters, costs of escaping, and probability of being killed. Predictions match extensively verified predictions of Ydenberg and Dill's (1986) model. Our main conclusion is that optimality models are preferable to break-even models because they permit fitness maximization, offer many new testable predictions, and allow assessment of prey decisions in many naturally occurring situations through modification of benefit, escape cost, and risk functions.

  11. Measurements of Doppler and multipath spread on oblique high-latitude HF paths and their use in characterizing data modem performance

    NASA Astrophysics Data System (ADS)

    Angling, Matthew J.; Cannon, Paul S.; Davies, Nigel C.; Willink, Tricia J.; Jodalen, Vivianne; Lundborg, Bengt

    1998-01-01

    Measurements of Doppler spread, multipath spread, and signal-to-noise ratio have been made on four high-latitude high-frequency (HF) communications paths. The measurement system and analysis techniques are outlined, and an analysis of the data pertinent to the design of robust HF data modems is presented. A summary of the spreads that are exceeded for 5% of time is presented for each path. Doppler spreads range from 2 to 55 Hz, while multipath spreads range from 1 to 11 ms. Physical interpretations of the data are made, and the data are related to the measured performance characteristics of an HF data modem to estimate the modem availability on the paths considered. When there is mode support, availabilities range from 64% to 100% for a signal-to-noise ratio of 0 dB, although the data indicate that the availabilities can generally be increased by optimizing frequency selection.

  12. Suppression of Systematic Errors of Electronic Distance Meters for Measurement of Short Distances.

    PubMed

    Braun, Jaroslav; Štroner, Martin; Urban, Rudolf; Dvoček, Filip

    2015-08-06

    In modern industrial geodesy, high demands are placed on the final accuracy, with expectations currently falling below 1 mm. The measurement methodology and surveying instruments used have to be adjusted to meet these stringent requirements, especially the total stations as the most often used instruments. A standard deviation of the measured distance is the accuracy parameter, commonly between 1 and 2 mm. This parameter is often discussed in conjunction with the determination of the real accuracy of measurements at very short distances (5-50 m) because it is generally known that this accuracy cannot be increased by simply repeating the measurement because a considerable part of the error is systematic. This article describes the detailed testing of electronic distance meters to determine the absolute size of their systematic errors, their stability over time, their repeatability and the real accuracy of their distance measurement. Twenty instruments (total stations) have been tested, and more than 60,000 distances in total were measured to determine the accuracy and precision parameters of the distance meters. Based on the experiments' results, calibration procedures were designed, including a special correction function for each instrument, whose usage reduces the standard deviation of the measurement of distance by at least 50%.

  13. Suppression of Systematic Errors of Electronic Distance Meters for Measurement of Short Distances

    PubMed Central

    Braun, Jaroslav; Štroner, Martin; Urban, Rudolf; Dvořáček, Filip

    2015-01-01

    In modern industrial geodesy, high demands are placed on the final accuracy, with expectations currently falling below 1 mm. The measurement methodology and surveying instruments used have to be adjusted to meet these stringent requirements, especially the total stations as the most often used instruments. A standard deviation of the measured distance is the accuracy parameter, commonly between 1 and 2 mm. This parameter is often discussed in conjunction with the determination of the real accuracy of measurements at very short distances (5–50 m) because it is generally known that this accuracy cannot be increased by simply repeating the measurement because a considerable part of the error is systematic. This article describes the detailed testing of electronic distance meters to determine the absolute size of their systematic errors, their stability over time, their repeatability and the real accuracy of their distance measurement. Twenty instruments (total stations) have been tested, and more than 60,000 distances in total were measured to determine the accuracy and precision parameters of the distance meters. Based on the experiments’ results, calibration procedures were designed, including a special correction function for each instrument, whose usage reduces the standard deviation of the measurement of distance by at least 50%. PMID:26258777

  14. Refocusing distance of a standard plenoptic camera.

    PubMed

    Hahne, Christopher; Aggoun, Amar; Velisavljevic, Vladan; Fiebig, Susanne; Pesch, Matthias

    2016-09-19

    Recent developments in computational photography enabled variation of the optical focus of a plenoptic camera after image exposure, also known as refocusing. Existing ray models in the field simplify the camera's complexity for the purpose of image and depth map enhancement, but fail to satisfyingly predict the distance to which a photograph is refocused. By treating a pair of light rays as a system of linear functions, it will be shown in this paper that its solution yields an intersection indicating the distance to a refocused object plane. Experimental work is conducted with different lenses and focus settings while comparing distance estimates with a stack of refocused photographs for which a blur metric has been devised. Quantitative assessments over a 24 m distance range suggest that predictions deviate by less than 0.35 % in comparison to an optical design software. The proposed refocusing estimator assists in predicting object distances just as in the prototyping stage of plenoptic cameras and will be an essential feature in applications demanding high precision in synthetic focus or where depth map recovery is done by analyzing a stack of refocused photographs.

  15. Theoretical Principles of Distance Education.

    ERIC Educational Resources Information Center

    Keegan, Desmond, Ed.

    This book contains the following papers examining the didactic, academic, analytic, philosophical, and technological underpinnings of distance education: "Introduction"; "Quality and Access in Distance Education: Theoretical Considerations" (D. Randy Garrison); "Theory of Transactional Distance" (Michael G. Moore);…

  16. Analytical Approach to Target Detection and Localization at High-Frequency Bands Using Multipath Propagation

    DTIC Science & Technology

    2016-04-25

    unseen directly by the antennas (both transmitter TX and receiver RX), or out of the Light - Of-Sight (LOS) area, as being covered by the obstacles such as...or in other words, out of the Light -Of-Sight (LOS) area, as being covered by the obstacles such as walls or buildings. This analysis is verified...that, we put a 1.5m high metallic wall at the distance of 1.5m from the two antennas. It is obviously that the Light Of Sight (LOS) is at 2.25m far

  17. The Metabolic Demands of Kayaking: A Review

    PubMed Central

    Michael, Jacob S.; Rooney, Kieron B.; Smith, Richard

    2008-01-01

    Flat-water kayaking is one of the best-known competitive canoeing disciplines in Australia and across the European countries. From a stationary start, paddlers are required to paddle their kayaks with maximal effort along the length of the competing distance. The ultimate criterion of kayak performance is the time taken to paddle a designated competition distance. In flat-water racing, events are contested over 500 and 1000 metres. To approximate the ultimate criterion over these distances, the velocity of the kayak should be measured. Furthermore, other factors that affect performance, such as force, power, technique and aerobic fitness, would all provide a valuable insight to the success of the kayak paddler. Specific research performed examining the physiological demands on kayak paddlers demonstrate high levels of both aerobic power and anaerobic capacity. It is the purpose if this review to present the published physiological data relating to men’s and women’s kayaking. With a number of recent publications, a need for an updated review is necessary. The present review summarises recent data on anthropometrics, physiological characteristics of successful and unsuccessful kayak athletes and methods of physiological testing. Due to the fact that more data have been reported for male competitors than for their female counterparts, the demands of kayaking on male athletes will be the main focus for this review. The review also suggests areas for future research into flatwater kayaking performance. Understanding the physiological requirements of kayaking can assist coaches and athletes in a number of ways. During competition or training, such information is helpful in the selection of appropriate protocols and metabolic indices to monitor an athlete’s performance improvements and assess an athlete’s suitability for a particular race distance. Furthermore, it may aid the coach in the development of more specific training programs for their athletes. Key

  18. The metabolic demands of kayaking: a review.

    PubMed

    Michael, Jacob S; Rooney, Kieron B; Smith, Richard

    2008-03-01

    Flat-water kayaking is one of the best-known competitive canoeing disciplines in Australia and across the European countries. From a stationary start, paddlers are required to paddle their kayaks with maximal effort along the length of the competing distance. The ultimate criterion of kayak performance is the time taken to paddle a designated competition distance. In flat-water racing, events are contested over 500 and 1000 metres. To approximate the ultimate criterion over these distances, the velocity of the kayak should be measured. Furthermore, other factors that affect performance, such as force, power, technique and aerobic fitness, would all provide a valuable insight to the success of the kayak paddler. Specific research performed examining the physiological demands on kayak paddlers demonstrate high levels of both aerobic power and anaerobic capacity. It is the purpose if this review to present the published physiological data relating to men's and women's kayaking. With a number of recent publications, a need for an updated review is necessary. The present review summarises recent data on anthropometrics, physiological characteristics of successful and unsuccessful kayak athletes and methods of physiological testing. Due to the fact that more data have been reported for male competitors than for their female counterparts, the demands of kayaking on male athletes will be the main focus for this review. The review also suggests areas for future research into flatwater kayaking performance. Understanding the physiological requirements of kayaking can assist coaches and athletes in a number of ways. During competition or training, such information is helpful in the selection of appropriate protocols and metabolic indices to monitor an athlete's performance improvements and assess an athlete's suitability for a particular race distance. Furthermore, it may aid the coach in the development of more specific training programs for their athletes. Key points

  19. Distance estimation in vista space.

    PubMed

    Daum, S Oliver; Hecht, Heiko

    2009-07-01

    Although distance estimation has been extensively studied in the laboratory, our ability to judge large distances in the field is not well researched. We challenge the notion that large distances are uniformly underestimated. We presented different targets to observers at distances ranging from 25 to 500 m to obtain egocentric distance judgments in natural environments. Three experiments showed that observers tend to underestimate distances below 75 m in a large open field, whereas they overestimate farther distances. Both the eye height of the observer and the size of the target also influenced distance estimation. We conclude that the notion of a uniform vista space has to be reconceived.

  20. Technology & Distance Learning Survey.

    ERIC Educational Resources Information Center

    Florida Human Resources Development, Inc., Gainesville.

    A survey was conducted to assess the current state of technology and distance learning awareness and usage in Florida's adult education and community-based programs. Data were gathered through a survey of 350 adult practitioners, literacy providers, community-based organizations and libraries throughout the state (125 responses [36 percent return…

  1. Going the Distance

    ERIC Educational Resources Information Center

    Barack, Lauren

    2005-01-01

    Sixty years ago, distance education probably involved a pen, paper, and secretarial classes conducted via snail mail. Today, students in ever-increasing numbers are more likely to link to the Internet to learn how to conjugate French verbs or dissect frogs in Advanced Placement courses, according to a new landmark study from the U. S. Department…

  2. Distance Learning Case Studies.

    ERIC Educational Resources Information Center

    Barker, Bruce O.

    The Office of Technology Assessment authorized a series of case studies in 1989 to investigate how technologies, services, and programs are implemented in distance education projects. The studies were also intended to look at the role of local, state, and federal agencies, and other public and private entities in providing educational services to…

  3. Misconceptions of Astronomical Distances

    ERIC Educational Resources Information Center

    Miller, Brian W.; Brewer, William F.

    2010-01-01

    Previous empirical studies using multiple-choice procedures have suggested that there are misconceptions about the scale of astronomical distances. The present study provides a quantitative estimate of the nature of this misconception among US university students by asking them, in an open-ended response format, to make estimates of the distances…

  4. Advances in Distance Learning.

    ERIC Educational Resources Information Center

    1999

    This document contains three symposium papers on advances in distance learning. "The Adoption of Computer Technology and Telecommunications: A Case Study" (Larry M. Dooley, Teri Metcalf, Ann Martinez) reports on a study of the possible applications of two theoretical models (Rogers' Diffusion of Innovations model and the Concerns-Based…

  5. Learning across Distance

    ERIC Educational Resources Information Center

    Cowan, Kristina

    2009-01-01

    A 2008 report, "Keeping Pace with K-12 Online Learning," commissioned by North American Council for Online Learning (NACOL) and others, defines online learning as "teacher-led education that takes place over the Internet, with the teacher and student separated geographically." The term "distance learning" includes online education, but is…

  6. Focus on Distance Education.

    ERIC Educational Resources Information Center

    Grenzky, Janet; Maitland, Christine

    2001-01-01

    As a followup to a survey of distance education faculty, the National Education Association conducted two 3-hour focus groups with 12 higher education faculty members in June 2000. The purpose of the groups was to gain more understanding of the complexity of feelings and opinions expressed in a telephone survey conducted in March 2000. The…

  7. Accreditation of Distance Learning

    ERIC Educational Resources Information Center

    Demirel, Ergün

    2016-01-01

    The higher education institutes aspire to gain reputation of quality having accreditation from internationally recognized awarding bodies. The accreditation leads and provides quality assurance for education. Although distance learning becomes a significant part of the education system in the 21st century, there is still a common opinion that the…

  8. On Defining Distance Education.

    ERIC Educational Resources Information Center

    Rumble, Greville

    1989-01-01

    Reviews past definitions of distance education and offers a new five-part definition of the concept. Topics discussed include the roles of the teachers and students; physical separation of teachers and learners; the influence of an educational organization; communication between teachers and students; and the use of technical media. (22…

  9. Rapport in Distance Education

    ERIC Educational Resources Information Center

    Murphy, Elizabeth; Rodriguez-Manzanares, Maria A.

    2012-01-01

    Rapport has been recognized as important in learning in general but little is known about its importance in distance education (DE). The study we report on in this paper provides insights into the importance of rapport in DE as well as challenges to and indicators of rapport-building in DE. The study relied on interviews with 42 Canadian…

  10. Long-Distance Learning.

    ERIC Educational Resources Information Center

    Charron, Elisabeth; Obbink, Kim

    1993-01-01

    Discusses the following questions in choosing distance education courses: Will I be able to "talk" with the instructor? Will I be able to talk with other course participants? Does the course include laboratories or other hands-on experiences? What equipment will I need to participate? What technical assistance will be available? Who is the course…

  11. Long Distance Learning.

    ERIC Educational Resources Information Center

    Villeneuve, Phyllis, Ed.

    1997-01-01

    This report, from the Faculty Association of Community and Technical Colleges (FACTC) in Washington, focuses on various distance learning courses offered by the state's two-year colleges. The report contains 16 articles from faculty members and students, including: (1) "The Emperor's New Tutor: A Confession" (Sydney Wallace Stegall); (2)…

  12. Encyclopedia of Distance Learning

    ERIC Educational Resources Information Center

    Howard, Caroline, Ed.; Boettecher, Judith, Ed.; Justice, Lorraine, Ed.; Schenk, Karen, Ed.; Rogers, Patricia, Ed.; Berg, Gary, Ed.

    2005-01-01

    The innovations in computer and communications technologies combined with on-going needs to deliver educational programs to students regardless of their physical locations, have lead to the innovation of distance education programs and technologies. To keep up with recent developments in both areas of technologies and techniques related to…

  13. Misconceptions of Astronomical Distances

    ERIC Educational Resources Information Center

    Miller, Brian W.; Brewer, William F.

    2010-01-01

    Previous empirical studies using multiple-choice procedures have suggested that there are misconceptions about the scale of astronomical distances. The present study provides a quantitative estimate of the nature of this misconception among US university students by asking them, in an open-ended response format, to make estimates of the distances…

  14. Distance Learning's Growing Reach.

    ERIC Educational Resources Information Center

    Walsh, John; Reese, Bob

    1995-01-01

    Examines the use of videoconferencing and video broadcasts for distance learning and presents examples: the Georgia Statewide Academic and Medical System, California State University System, Kansas City Education Network, Impact North Carolina, the School of Visual Arts in Manhattan, National Technological University, GALAXY Classroom, and…

  15. Going the Distance

    ERIC Educational Resources Information Center

    Barack, Lauren

    2005-01-01

    Sixty years ago, distance education probably involved a pen, paper, and secretarial classes conducted via snail mail. Today, students in ever-increasing numbers are more likely to link to the Internet to learn how to conjugate French verbs or dissect frogs in Advanced Placement courses, according to a new landmark study from the U. S. Department…

  16. ESP and Distance Learning.

    ERIC Educational Resources Information Center

    Boyle, Ron

    1994-01-01

    Distance learning (DL) is proposed as one means of providing in-session language classes for non-native-speaking postgraduate students at English-medium universities. A DL preparatory language program at the Asian Institute of Technology in Bangkok is described. (48 references) (Author/LB)

  17. Learning across Distance

    ERIC Educational Resources Information Center

    Cowan, Kristina

    2009-01-01

    A 2008 report, "Keeping Pace with K-12 Online Learning," commissioned by North American Council for Online Learning (NACOL) and others, defines online learning as "teacher-led education that takes place over the Internet, with the teacher and student separated geographically." The term "distance learning" includes online education, but is…

  18. Peterson's Distance Learning 1997.

    ERIC Educational Resources Information Center

    Peterson's Guides, Inc., Princeton, NJ.

    This guide provides profiles of distance learning programs in postsecondary education institutions throughout the United States, alphabetically by institution. The descriptions contain information on program access, media used (e.g., videocassette, correspondence, television, radio, teleconferencing), student services offered, application process,…

  19. Prospect of Distance Learning

    ERIC Educational Resources Information Center

    Rahman, Monsurur; Karim, Reza; Byramjee, Framarz

    2015-01-01

    Many educational institutions in the United States are currently offering programs through distance learning, and that trend is rising. In almost all spheres of education a developing country like Bangladesh needs to make available the expertise of the most qualified faculty to her distant people. But the fundamental question remains as to whether…

  20. Determining average yarding distance.

    Treesearch

    Roger H. Twito; Charles N. Mann

    1979-01-01

    Emphasis on environmental and esthetic quality in timber harvesting has brought about increased use of complex boundaries of cutting units and a consequent need for a rapid and accurate method of determining the average yarding distance and area of these units. These values, needed for evaluation of road and landing locations in planning timber harvests, are easily and...

  1. Movement and Physiological Demands of Australasian National Rugby League Referees.

    PubMed

    Brightmore, Amy; O'Hara, John; Till, Kevin; Cobley, Steve; Hubka, Tate; Emmonds, Stacey; Cooke, Carlton

    2016-11-01

    To evaluate the movement and physiological demands of Australasian National Rugby League (NRL) referees, officiating with a 2-referee (ie, lead and pocket) system, and to compare the demands of the lead and pocket referees. Global positioning system devices (10 Hz) were used to obtain 86 data sets (lead, n = 41; pocket, n = 45) on 19 NRL referees. Total distance, relative distance covered, and heart rate per half and across match play were examined within and between referees using t tests. Distance, time, and number of movement "efforts" were examined in 6 velocity classifications (ie, standing <0.5, walking 0.51-2.0, jogging 2.01-4.0, running 4.01-5.5, high-speed running 5.51-7.0, and sprinting >7.0 m/s) using analysis of variance. Cohen d effect sizes are reported. There were no significant differences between the lead and pocket referees for any movement or physiological variable. There was an overall significant (large, very large) effect for distance (% distance) and time (% time) (P < .001) between velocity classifications for both the lead and pocket referees. Both roles covered the largest distance and number of efforts at velocities of 0.51-2.0 m/s and 2.01-4.0 m/s, which were interspersed with efforts >5.51 m/s. Findings highlight the intermittent nature of rugby league refereeing but show that there were no differences in the movement and physiological demands of the 2 refereeing roles. Findings are valuable for those responsible for the preparation, training, and conditioning of NRL referees and to ensure that training prepares for and simulates match demands.

  2. Effect of Geographic Distance on Distance Education: An Empirical Study

    ERIC Educational Resources Information Center

    Luo, Heng; Robinson, Anthony C.; Detwiler, Jim

    2014-01-01

    This study investigates the effect of geographic distance on students' distance learning experience with the aim to provide tentative answers to a fundamental question--does geographic distance matter in distance education? Using educational outcome data collected from an online master's program in Geographic Information Systems, this study…

  3. Celebrating Distance Teaching Innovations: The Certificate in Distance Teaching.

    ERIC Educational Resources Information Center

    Boylan, Colin; Tuovinen, Juhani

    Charles Sturt University (Riverina, Australia) has initiated the Certificate in Distance Teaching course for rural teachers working in a distance education setting to extend their understandings about rural and distance education topics. Two semester-long subjects constitute the course: pedagogy of distance teaching and organization of distance…

  4. Distance Training as Part of a Distance Consulting Solution.

    ERIC Educational Resources Information Center

    Fulantelli, Giovanni; Chiazzese, Giuseppe; Allegra, Mario

    "Distance Training" models, when integrated in a more complex framework, such as a "Distance Consulting" model, present specific features and impose a revision of the strategies commonly adopted in distance training experiences. This paper reports on the distance training strategies adopted in a European funded project aimed at…

  5. An integrated communications demand model

    NASA Astrophysics Data System (ADS)

    Doubleday, C. F.

    1980-11-01

    A computer model of communications demand is being developed to permit dynamic simulations of the long-term evolution of demand for communications media in the U.K. to be made under alternative assumptions about social, economic and technological trends in British Telecom's business environment. The context and objectives of the project and the potential uses of the model are reviewed, and four key concepts in the demand for communications media, around which the model is being structured are discussed: (1) the generation of communications demand; (2) substitution between media; (3) technological convergence; and (4) competition. Two outline perspectives on the model itself are given.

  6. Predicting impact of multi-paths on phase change in map-based vehicular ad hoc networks

    NASA Astrophysics Data System (ADS)

    Rahmes, Mark; Lemieux, George; Sonnenberg, Jerome; Chester, David B.

    2014-05-01

    Dynamic Spectrum Access, which through its ability to adapt the operating frequency of a radio, is widely believed to be a solution to the limited spectrum problem. Mobile Ad Hoc Networks (MANETs) can extend high capacity mobile communications over large areas where fixed and tethered-mobile systems are not available. In one use case with high potential impact cognitive radio employs spectrum sensing to facilitate identification of allocated frequencies not currently accessed by their primary users. Primary users own the rights to radiate at a specific frequency and geographic location, secondary users opportunistically attempt to radiate at a specific frequency when the primary user is not using it. We quantify optimal signal detection in map based cognitive radio networks with multiple rapidly varying phase changes and multiple orthogonal signals. Doppler shift occurs due to reflection, scattering, and rapid vehicle movement. Path propagation as well as vehicle movement produces either constructive or destructive interference with the incident wave. Our signal detection algorithms can assist the Doppler spread compensation algorithm by deciding how many phase changes in signals are present in a selected band of interest. Additionally we can populate a spatial radio environment map (REM) database with known information that can be leveraged in an ad hoc network to facilitate Dynamic Spectrum Access. We show how topography can help predict the impact of multi-paths on phase change, as well as about the prediction from dense traffic areas. Utilization of high resolution geospatial data layers in RF propagation analysis is directly applicable.

  7. Simple boric acid-based fluorescent focusing for sensing of glucose and glycoprotein via multipath moving supramolecular boundary electrophoresis chip.

    PubMed

    Dong, Jingyu; Li, Si; Wang, Houyu; Meng, Qinghua; Fan, Liuyin; Xie, Haiyang; Cao, Chengxi; Zhang, Weibing

    2013-06-18

    Boric acid-based fluorescent complex probe of BBV-HPTS (boronic acid-based benzyl viologen (BBV) and hydroxypyrene trisulfonic acid trisodium salt (HPTS)) was rarely used for sensitive sensing of saccharide (especially glycoprotein) via electrophoresis. We proposed a novel model of moving supramolecular boundary (MSB) formed with monosaccharide or glycoprotein in microcolumn and the complex probe of BBV-HPTS in the cathodic injection tube, developed a method of MSB fluorescent focusing for sensitive recognition of monosaccharide and glycoprotein, and designed a special multipath capillary electrophoresis (CE) chip for relative experiments. As a proof of concept, glucose and hemoglobin A1c (HbA1c) were respectively used as the mode saccharide and glycoprotein for the relevant demonstration. The experiments revealed that (i) the complex of BBV-HPTS could interact with free glucose or bound one in glycoprotein; (ii) the fluorescent signal was a function of glucose or glycoprotein content approximately; and (iii) interestingly the fluorescent band motion was dependent on glucose content. The developed method had the following merits: (i) low cost; (ii) low limit of detection (down to 1.39 pg/mL for glucose and 2.0 pg per capillary HbA1c); and (iii) high throughput (up to 12 runs or more per patch) and speed (less than 5 min). The developed method has potential use for sensitive monitoring of monosaccharide and glycoprotein in biomedical samples.

  8. Distance between images

    NASA Technical Reports Server (NTRS)

    Gualtieri, J. A.; Le Moigne, J.; Packer, C. V.

    1992-01-01

    Comparing two binary images and assigning a quantitative measure to this comparison finds its purpose in such tasks as image recognition, image compression, and image browsing. This quantitative measurement may be computed by utilizing the Hausdorff distance of the images represented as two-dimensional point sets. In this paper, we review two algorithms that have been proposed to compute this distance, and we present a parallel implementation of one of them on the MasPar parallel processor. We study their complexity and the results obtained by these algorithms for two different types of images: a set of displaced pairs of images of Gaussian densities, and a comparison of a Canny edge image with several edge images from a hierarchical region growing code.

  9. The sound of distance.

    PubMed

    Rabaglia, Cristina D; Maglio, Sam J; Krehm, Madelaine; Seok, Jin H; Trope, Yaacov

    2016-07-01

    Human languages may be more than completely arbitrary symbolic systems. A growing literature supports sound symbolism, or the existence of consistent, intuitive relationships between speech sounds and specific concepts. Prior work establishes that these sound-to-meaning mappings can shape language-related judgments and decisions, but do their effects generalize beyond merely the linguistic and truly color how we navigate our environment? We examine this possibility, relating a predominant sound symbolic distinction (vowel frontness) to a novel associate (spatial proximity) in five studies. We show that changing one vowel in a label can influence estimations of distance, impacting judgment, perception, and action. The results (1) provide the first experimental support for a relationship between vowels and spatial distance and (2) demonstrate that sound-to-meaning mappings have outcomes that extend beyond just language and can - through a single sound - influence how we perceive and behave toward objects in the world. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Geodetic distance measuring apparatus

    NASA Technical Reports Server (NTRS)

    Abshire, J. B. (Inventor)

    1983-01-01

    A mode locked laser system including a laser device and its peripheral components is utilized for deriving two mutually phase locked optical wavelength signals and one phase locked microwave CW signal which respectively traverse the same distance measurement path. Preferably the optical signals are comprised of pulse type signals. Phase comparison of the two optical wavelength pulse signals is used to provide a measure of the dry air density while phase comparison of one of the optical wavelength pulse signals and the microwave CW signal is used to provide a measure of the wet or water vapor density of the air. From these measurements is computed in means of the distance to be measured corrected for the atmospheric dry and water vapor densities in the measurement path.

  11. Novae as distance indicators

    NASA Technical Reports Server (NTRS)

    Ford, Holland C.; Ciardullo, Robin

    1988-01-01

    Nova shells are characteristically prolate with equatorial bands and polar caps. Failure to account for the geometry can lead to large errors in expansion parallaxes for individual novae. When simple prescriptions are used for deriving expansion parallaxes from an ensemble of randomly oriented prolate spheroids, the average distance will be too small by factors of 10 to 15 percent. The absolute magnitudes of the novae will be underestimated and the resulting distance scale will be too small by the same factors. If observations of partially resolved nova shells select for large inclinations, the systematic error in the resulting distance scale could easily be 20 to 30 percent. Extinction by dust in the bulge of M31 may broaden and shift the intrinsic distribution of maximum nova magnitudes versus decay rates. We investigated this possibility by projecting Arp's and Rosino's novae onto a composite B - 6200A color map of M31's bulge. Thirty two of the 86 novae projected onto a smooth background with no underlying structure due to the presence of a dust cloud along the line of sight. The distribution of maximum magnitudes versus fade rates for these unreddened novae is indistinguishable from the distribution for the entire set of novae. It is concluded that novae suffer very little extinction from the filamentary and patchy distribution of dust seen in the bulge of M31. Time average B and H alpha nova luminosity functions are potentially powerful new ways to use novae as standard candles. Modern CCD observations and the photographic light curves of M31 novae found during the last 60 years were analyzed to show that these functions are power laws. Consequently, unless the eruption times for novae are known, the data cannot be used to obtain distances.

  12. Evaluating linguistic distance measures

    NASA Astrophysics Data System (ADS)

    Wichmann, Søren; Holman, Eric W.; Bakker, Dik; Brown, Cecil H.

    2010-09-01

    In Ref. [13], Petroni and Serva discuss the use of Levenshtein distances (LD) between words referring to the same concepts as a tool for establishing overall distances among languages which can then subsequently be used to derive phylogenies. The authors modify the raw LD by dividing the LD by the length of the longer of the two words compared, to produce what could be called LDN (normalized LD). Other scholars [7,8] have used a further modification, where they divide the LDN by the average LDN among words not referring to the same concept. This produces what could be called LDND. The authors of Ref. [13] question whether LDND is a more adequate measure of distance than LDN. Here we show empirically that LDND is the better measure in the situation where the languages compared have not already been shown, by other, more traditional methods of comparative linguistics, to be related. If automated language classification is to be used as a tool independent of traditional methods then the further modification is necessary.

  13. Nutrition for distance events.

    PubMed

    Burke, Louise M; Millet, Gregoire; Tarnopolsky, Mark A

    2007-01-01

    The goal of training is to prepare the distance athlete to perform at his or her best during major competitions. Whatever the event, nutrition plays a major role in the achievement of various factors that will see a runner or walker take the starting line in the best possible form. Everyday eating patterns must supply fuel and nutrients needed to optimize their performance during training sessions and to recover quickly afterwards. Carbohydrate and fluid intake before, during, and after a workout may help to reduce fatigue and enhance performance. Recovery eating should also consider issues for adaptation and the immune system that may involve intakes of protein and some micronutrients. Race preparation strategies should include preparation of adequate fuel stores, including carbohydrate loading for prolonged events such as the marathon or 50-km walk. Fluid and carbohydrate intake during races lasting an hour or more should also be considered. Sports foods and supplements of value to distance athletes include sports drinks and liquid meal supplements to allow nutrition goals to be achieved when normal foods are not practical. While caffeine is an ergogenic aid of possible value to distance athletes, most other supplements are of minimal benefit.

  14. Demand Activated Manufacturing Architecture

    SciTech Connect

    Bender, T.R.; Zimmerman, J.J.

    2001-02-07

    Honeywell Federal Manufacturing & Technologies (FM&T) engineers John Zimmerman and Tom Bender directed separate projects within this CRADA. This Project Accomplishments Summary contains their reports independently. Zimmerman: In 1998 Honeywell FM&T partnered with the Demand Activated Manufacturing Architecture (DAMA) Cooperative Business Management Program to pilot the Supply Chain Integration Planning Prototype (SCIP). At the time, FM&T was developing an enterprise-wide supply chain management prototype called the Integrated Programmatic Scheduling System (IPSS) to improve the DOE's Nuclear Weapons Complex (NWC) supply chain. In the CRADA partnership, FM&T provided the IPSS technical and business infrastructure as a test bed for SCIP technology, and this would provide FM&T the opportunity to evaluate SCIP as the central schedule engine and decision support tool for IPSS. FM&T agreed to do the bulk of the work for piloting SCIP. In support of that aim, DAMA needed specific DOE Defense Programs opportunities to prove the value of its supply chain architecture and tools. In this partnership, FM&T teamed with Sandia National Labs (SNL), Division 6534, the other DAMA partner and developer of SCIP. FM&T tested SCIP in 1998 and 1999. Testing ended in 1999 when DAMA CRADA funding for FM&T ceased. Before entering the partnership, FM&T discovered that the DAMA SCIP technology had an array of applications in strategic, tactical, and operational planning and scheduling. At the time, FM&T planned to improve its supply chain performance by modernizing the NWC-wide planning and scheduling business processes and tools. The modernization took the form of a distributed client-server planning and scheduling system (IPSS) for planners and schedulers to use throughout the NWC on desktops through an off-the-shelf WEB browser. The planning and scheduling process within the NWC then, and today, is a labor-intensive paper-based method that plans and schedules more than 8,000 shipped parts

  15. CAREER GUIDE FOR DEMAND OCCUPATIONS.

    ERIC Educational Resources Information Center

    LEE, E.R.; WELCH, JOHN L.

    THIS PUBLICATION UPDATES THE "CAREER GUIDE FOR DEMAND OCCUPATIONS" PUBLISHED IN 1959 AND PROVIDES COUNSELORS WITH INFORMATION ABOUT OCCUPATIONS IN DEMAND IN MANY AREAS WHICH REQUIRE PREEMPLOYMENT TRAINING. IT PRESENTS, IN COLUMN FORM, THE EDUCATION AND OTHER TRAINING USUALLY REQUIRED BY EMPLOYERS, HIGH SCHOOL SUBJECTS OF PARTICULAR PERTINENCE TO…

  16. CAREER GUIDE FOR DEMAND OCCUPATIONS.

    ERIC Educational Resources Information Center

    LEE, E.R.; WELCH, JOHN L.

    THIS PUBLICATION UPDATES THE "CAREER GUIDE FOR DEMAND OCCUPATIONS" PUBLISHED IN 1959 AND PROVIDES COUNSELORS WITH INFORMATION ABOUT OCCUPATIONS IN DEMAND IN MANY AREAS WHICH REQUIRE PREEMPLOYMENT TRAINING. IT PRESENTS, IN COLUMN FORM, THE EDUCATION AND OTHER TRAINING USUALLY REQUIRED BY EMPLOYERS, HIGH SCHOOL SUBJECTS OF PARTICULAR PERTINENCE TO…

  17. China, India demand cushions prices

    SciTech Connect

    Boyle, M.

    2006-11-15

    Despite the hopes of coal consumers, coal prices did not plummet in 2006 as demand stayed firm. China and India's growing economies, coupled with solid supply-demand fundamentals in North America and Europe, and highly volatile prices for alternatives are likely to keep physical coal prices from wide swings in the coming year.

  18. Harnessing the power of demand

    SciTech Connect

    Sheffrin, Anjali; Yoshimura, Henry; LaPlante, David; Neenan, Bernard

    2008-03-15

    Demand response can provide a series of economic services to the market and also provide ''insurance value'' under low-likelihood, but high-impact circumstances in which grid reliablity is enhanced. Here is how ISOs and RTOs are fostering demand response within wholesale electricity markets. (author)

  19. Societal Demands on the Curriculum.

    ERIC Educational Resources Information Center

    Froese, Elmer E.

    Canada's national educational system elicits diverse curricular demands and requires discreet, sensitive responses. In spite of perennial funding shortfalls, Canada's schools have been remarkably successful in meeting those demands. During and after the 1960s, educational change came as a result of two very strong sets of expectations. One broad…

  20. Demand for outpatient healthcare: empirical findings from rural India.

    PubMed

    Sarma, Sisira

    2009-01-01

    Price, income and health status are likely to affect the demand for healthcare in developing countries, and their quantitative effects are unclear in the literature. Some studies report that prices are not important determinants, while others conclude that prices are important determinants of the demand for healthcare. Knowledge of the extent to which price, income and health status affect the demand for healthcare is crucial for the design of effective health policy in developing countries. To examine the role of monetary and non-monetary price, income, and a variety of individual- and household-specific characteristics on the demand for healthcare in rural India. Utilizing micro data from the 52nd round of India's National Sample Survey, a variable choice set based on geographical location, price, income and the severity of illness was constructed to reflect the underlying true choice-generating process in rural India. Nested multinomial logit models were estimated and simulations with respect to prices and income were conducted to estimate price and income elasticities. Contrary to many earlier studies on the demand for healthcare in developing countries, it was found that prices and income were statistically significant determinants of the choice of healthcare provider by individuals in rural India. Demand for healthcare was found to be price and income inelastic, corroborating the findings from other developing countries. Distance to formal healthcare facilities negatively affected the demand for outpatient healthcare, an effect that was mitigated as access to transportation improved. Age, sex, healthy days, educational status of the household members and the number of children and adults living in the household also affected the choice of healthcare provider in rural India. After controlling for a number of sociodemographic factors, it was found that prices, income and distance are statistically significant determinants of the provider chosen by individuals

  1. Distance learning in the digital environment.

    PubMed

    Wiggins, R H; Katzman, G L; Dilda, P; Harnsberger, H R; Davidson, H C

    2001-06-01

    The expansion of radiology departments and divisions often can not occur in adjacent geographic locations. This leads to a greater separation of staff and residents, as well as workers in similar divisions. This makes traditional teaching difficult in academic institutions. The economic drive forcing many departments to investigate more isolated outpatient imaging centers has further hindered the ability to continue effective academic training at many facilities. The ability to easily share a digital environment across physical distance can greatly enhance the teaching experience, as well as be a valuable tool for consultation and case discussion with referring clinicians. The transition to a filmless environment with picture archiving and communication systems (PACS) can be utilized for distance learning in addition to the clinical arena. It is possible to take advantage of the digital transformation to PACS and case-viewing browser programs to conduct improved interactions with referring clinicians as well as radiologic teaching with relatively minimal hardware and software demands. The integration of web-based teleradiology programs with business networking software can be used for effective distance learning in the digital environment, sufficiently closing the distance on our rapidly expanding departments. This same technology allows for greater interaction with referring clinicians for real-time consultation and enhanced case discussion to entrench a supportive referral base for the radiologic community.

  2. Demand Response for Ancillary Services

    SciTech Connect

    Alkadi, Nasr E; Starke, Michael R

    2013-01-01

    Many demand response resources are technically capable of providing ancillary services. In some cases, they can provide superior response to generators, as the curtailment of load is typically much faster than ramping thermal and hydropower plants. Analysis and quantification of demand response resources providing ancillary services is necessary to understand the resources economic value and impact on the power system. Methodologies used to study grid integration of variable generation can be adapted to the study of demand response. In the present work, we describe and illustrate a methodology to construct detailed temporal and spatial representations of the demand response resource and to examine how to incorporate those resources into power system models. In addition, the paper outlines ways to evaluate barriers to implementation. We demonstrate how the combination of these three analyses can be used to translate the technical potential for demand response providing ancillary services into a realizable potential.

  3. Automated Demand Response and Commissioning

    SciTech Connect

    Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

    2005-04-01

    This paper describes the results from the second season of research to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve the electric grid reliability and manage electricity costs. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. We refer to this as Auto-DR. The evaluation of the control and communications must be properly configured and pass through a set of test stages: Readiness, Approval, Price Client/Price Server Communication, Internet Gateway/Internet Relay Communication, Control of Equipment, and DR Shed Effectiveness. New commissioning tests are needed for such systems to improve connecting demand responsive building systems to the electric grid demand response systems.

  4. Elasticity of Demand for Tuition Fees at an Institution of Higher Education

    ERIC Educational Resources Information Center

    Langelett, George; Chang, Kuo-Liang; Ola' Akinfenwa, Samson; Jorgensen, Nicholas; Bhattarai, Kopila

    2015-01-01

    Using a conjoint survey of 161 students at South Dakota State University (SDSU), we mapped a probability-of-enrolment curve for SDSU students, consistent with demand theory. A quasi-demand curve was created from the conditional-logit model. This study shows that along with the price of tuition fees, distance from home, availability of majors, and…

  5. Elasticity of Demand for Tuition Fees at an Institution of Higher Education

    ERIC Educational Resources Information Center

    Langelett, George; Chang, Kuo-Liang; Ola' Akinfenwa, Samson; Jorgensen, Nicholas; Bhattarai, Kopila

    2015-01-01

    Using a conjoint survey of 161 students at South Dakota State University (SDSU), we mapped a probability-of-enrolment curve for SDSU students, consistent with demand theory. A quasi-demand curve was created from the conditional-logit model. This study shows that along with the price of tuition fees, distance from home, availability of majors, and…

  6. Faculty Concerns Related to Distance Learning within Nontraditional Doctoral Programs

    ERIC Educational Resources Information Center

    Singleton, H. Wells; Session, Carmen L.

    2011-01-01

    As a unique academic offering, the nontraditional, distance-delivered doctorate poses particular issues for faculty members who choose to teach in such a program. Among these issues are compensation, administrative support, technology, innovation, time demands, workload, and promotion and tenure. In this chapter, the authors identify and provide…

  7. Optimizing Environmental Monitoring Networks with Direction-Dependent Distance Thresholds.

    ERIC Educational Resources Information Center

    Hudak, Paul F.

    1993-01-01

    In the direction-dependent approach to location modeling developed herein, the distance within which a point of demand can find service from a facility depends on direction of measurement. The utility of the approach is illustrated through an application to groundwater remediation. (Author/MDH)

  8. Reaching Part-Time Distance Students in Diverse Environments

    ERIC Educational Resources Information Center

    Whitehair, Kristin J.

    2010-01-01

    This article focuses on the model used at the University of Kansas Medical Center to reach graduate students in the School of Nursing. Like many students returning for graduate degrees, distance students are balancing the demands of professional positions, graduate studies, and family life. Topics addressed include: point-of-need assistance,…

  9. Crossing Cultures and Borders in International Online Distance Higher Education

    ERIC Educational Resources Information Center

    Sadykova, Gulnara; Dautermann, Jennie

    2009-01-01

    The growing demand for higher education worldwide, along with global expansion of telecommunication technologies, give online distance education a potential world-wide reach for institutions in many countries. Given the persistent international digital divide and the potential for the host institutions and languages to be those of wealthy,…

  10. Lessons Learned in Kindergarten Go the Distance: Occupational Program Sharing.

    ERIC Educational Resources Information Center

    Dailey, Beth; Budjac, Susan

    In 1993, in response to declining resources and demand for dental hygienists at other technical colleges, Wisconsin's Northcentral Technical College (NTC) converted its dental hygienist program from a traditional format to a distance format that uses interactive television and is shared between NTC and three other colleges. The framework used by…

  11. Reaching Part-Time Distance Students in Diverse Environments

    ERIC Educational Resources Information Center

    Whitehair, Kristin J.

    2010-01-01

    This article focuses on the model used at the University of Kansas Medical Center to reach graduate students in the School of Nursing. Like many students returning for graduate degrees, distance students are balancing the demands of professional positions, graduate studies, and family life. Topics addressed include: point-of-need assistance,…

  12. Delivery of Open, Distance, and E-Learning in Kenya

    ERIC Educational Resources Information Center

    Nyerere, Jackline Anyona; Gravenir, Frederick Q.; Mse, Godfrey S.

    2012-01-01

    The increased demand and need for continuous learning have led to the introduction of open, distance, and e-learning (ODeL) in Kenya. Provision of this mode of education has, however, been faced with various challenges, among them infrastructural ones. This study was a survey conducted in two public universities offering major components of ODeL,…

  13. Optimizing Environmental Monitoring Networks with Direction-Dependent Distance Thresholds.

    ERIC Educational Resources Information Center

    Hudak, Paul F.

    1993-01-01

    In the direction-dependent approach to location modeling developed herein, the distance within which a point of demand can find service from a facility depends on direction of measurement. The utility of the approach is illustrated through an application to groundwater remediation. (Author/MDH)

  14. Distance to Dark Bodies

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Using the unique orbit of NASA's Spitzer Space Telescope and a depth-perceiving trick called parallax, astronomers have determined the distance to an invisible Milky Way object called OGLE-2005-SMC-001. This artist's concept illustrates how this trick works: different views from both Spitzer and telescopes on Earth are combined to give depth perception.

    Our Milky Way galaxy is heavier than it looks, and scientists use the term 'dark matter' to describe all the 'heavy stuff' in the universe that seems to be present but invisible to our telescopes. While much of this dark matter is likely made up of exotic materials, different from the ordinary particles that make up the world around us, some may consist of dark celestial bodies -- like planets, black holes, or failed stars -- that do not produce light or are too faint to detect from Earth. OGLE-2005-SMC-001 is one of these dark celestial bodies.

    Although astronomers cannot see a dark body, they can sense its presence from the way light acts around it. When a dark body like OGLE-2005-SMC-001 passes in front of a bright star, its gravity causes the background starlight to bend and brighten, a process called gravitational microlensing. When the observing telescope, dark body, and star system are closely aligned, the microlensing event reaches maximum, or peak, brightness.

    A team of astronomers first sensed OGLE-2005-SMC-001's presence when it passed in front of a star in a neighboring satellite galaxy called the Small Magellanic Cloud. In this artist's rendering, the satellite galaxy is depicted as the fuzzy structure sitting to the left of Earth. Once they detected this microlensing event, the scientists used Spitzer and the principle of parallax to figure out its distance. Humans naturally use parallax to determine distance. Each eye sees the distance of an object differently. The brain takes each eye's perspective and instantaneously calculates how far away the object is.

    To determine OGLE

  15. Distance to Dark Bodies

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Using the unique orbit of NASA's Spitzer Space Telescope and a depth-perceiving trick called parallax, astronomers have determined the distance to an invisible Milky Way object called OGLE-2005-SMC-001. This artist's concept illustrates how this trick works: different views from both Spitzer and telescopes on Earth are combined to give depth perception.

    Our Milky Way galaxy is heavier than it looks, and scientists use the term 'dark matter' to describe all the 'heavy stuff' in the universe that seems to be present but invisible to our telescopes. While much of this dark matter is likely made up of exotic materials, different from the ordinary particles that make up the world around us, some may consist of dark celestial bodies -- like planets, black holes, or failed stars -- that do not produce light or are too faint to detect from Earth. OGLE-2005-SMC-001 is one of these dark celestial bodies.

    Although astronomers cannot see a dark body, they can sense its presence from the way light acts around it. When a dark body like OGLE-2005-SMC-001 passes in front of a bright star, its gravity causes the background starlight to bend and brighten, a process called gravitational microlensing. When the observing telescope, dark body, and star system are closely aligned, the microlensing event reaches maximum, or peak, brightness.

    A team of astronomers first sensed OGLE-2005-SMC-001's presence when it passed in front of a star in a neighboring satellite galaxy called the Small Magellanic Cloud. In this artist's rendering, the satellite galaxy is depicted as the fuzzy structure sitting to the left of Earth. Once they detected this microlensing event, the scientists used Spitzer and the principle of parallax to figure out its distance. Humans naturally use parallax to determine distance. Each eye sees the distance of an object differently. The brain takes each eye's perspective and instantaneously calculates how far away the object is.

    To determine OGLE

  16. Advanced hierarchical distance sampling

    USGS Publications Warehouse

    Royle, Andy

    2016-01-01

    In this chapter, we cover a number of important extensions of the basic hierarchical distance-sampling (HDS) framework from Chapter 8. First, we discuss the inclusion of “individual covariates,” such as group size, in the HDS model. This is important in many surveys where animals form natural groups that are the primary observation unit, with the size of the group expected to have some influence on detectability. We also discuss HDS integrated with time-removal and double-observer or capture-recapture sampling. These “combined protocols” can be formulated as HDS models with individual covariates, and thus they have a commonality with HDS models involving group structure (group size being just another individual covariate). We cover several varieties of open-population HDS models that accommodate population dynamics. On one end of the spectrum, we cover models that allow replicate distance sampling surveys within a year, which estimate abundance relative to availability and temporary emigration through time. We consider a robust design version of that model. We then consider models with explicit dynamics based on the Dail and Madsen (2011) model and the work of Sollmann et al. (2015). The final major theme of this chapter is relatively newly developed spatial distance sampling models that accommodate explicit models describing the spatial distribution of individuals known as Point Process models. We provide novel formulations of spatial DS and HDS models in this chapter, including implementations of those models in the unmarked package using a hack of the pcount function for N-mixture models.

  17. Costing Distance Education and Open Learning in Sub-Saharan Africa: Working Group on Distance Education and Open Learning-- A Survey of Policy and Practice. Final Report

    ERIC Educational Resources Information Center

    Commonwealth of Learning, 2004

    2004-01-01

    Ideological arguments are made for open learning, economic ones for distance education. If it can produce similar results to those of conventional education at a lower cost, then distance education has a powerful appeal. With increasing demand for access to educational opportunities at all levels, and often decreasing budgets in real terms for…

  18. Costing Distance Education and Open Learning in Sub-Saharan Africa: Working Group on Distance Education and Open Learning-- A Survey of Policy and Practice. Final Report

    ERIC Educational Resources Information Center

    Commonwealth of Learning, 2004

    2004-01-01

    Ideological arguments are made for open learning, economic ones for distance education. If it can produce similar results to those of conventional education at a lower cost, then distance education has a powerful appeal. With increasing demand for access to educational opportunities at all levels, and often decreasing budgets in real terms for…

  19. Distance Metric Tracking

    DTIC Science & Technology

    2016-03-02

    520, 2004. 16 [12] E.C. Hall and R.M. Willett. Online convex optimization in dynamic environ- ments. Selected Topics in Signal Processing, IEEE Journal...Conference on Machine Learning, pages 1160–1167. ACM, 2008. [25] Eric P Xing, Michael I Jordan, Stuart Russell, and Andrew Y Ng. Distance metric...whereBψ is any Bregman divergence and ηt is the learning rate parameter. From ( Hall & Willett, 2015) we have: Theorem 1. G` = max θ∈Θ,`∈L ‖∇f(θ)‖ φmax = 1

  20. Demand for Primary Schooling in Rural Mali: Should User Fees Be Increased?

    ERIC Educational Resources Information Center

    Birdsall, Nancy; Orivel, Francois

    1996-01-01

    Assesses the effect of school fees on primary school attendance, using household and school survey data from rural Mali. Estimates elasticity of demand regarding fees and compares it with effects of distance and quality on enrollment. User fees can provide a partial solution to the quality/enrollment problem, but cannot solve the distance problem.…

  1. Modeling the Demand for Cocaine

    DTIC Science & Technology

    1994-01-01

    the Demand for Cocaine Susan S. Everingham C. Peter Rydell Pre~redfor the Office of NatinalDrug Control Policy United States Army DRUG POLICY...Demand for Cocaine . 60 50- sm 40- squared 30- delta prevalence 20- 10- 0.2 0 0.15 0.15 󈧄 b C; 0 i Sum squared delta 0.2 prevalence 0.195 EQ 50-50 0,19...model of the demand for cocaine that was fit to 20 years of data on the current cocaine epidemic in the United States. It also describes the analysis

  2. Time-Distance Helioseismology

    NASA Technical Reports Server (NTRS)

    Duvall, Thomas L., Jr.

    2010-01-01

    Time-distance helioseismology is a method of ambient noise imaging using the solar oscillations. The basic realization that led to time-distance helioseismology was that the temporal cross correlation of the signals at two 'surface' (or photospheric) locations should show a feature at the time lag corresponding to the subsurface travel time between the locations. The temporal cross correlation, as a function of the location separation, is the Fourier transform of the spatio-temporal power spectrum of the solar oscillations, a commonly used function in helioseismology. It is therefore likely the characteristic ridge structure of the correlation function had been seen before without appreciation of its significance. Travel times are measured from the cross correlations. The times are sensitive to a number of important subsurface solar phenomena. These include sound speed variations, flows, and magnetic fields. There has been much interesting progress in the 17 years since the first paper on this subject (Duvall et al., Nature, 1993, 362, 430-432). This progress will be reviewed in this paper.

  3. Distance collaborations with industry

    SciTech Connect

    Peskin, A.; Swyler, K.

    1998-06-01

    The college industry relationship has been identified as a key policy issue in Engineering Education. Collaborations between academic institutions and the industrial sector have a long history and a bright future. For Engineering and Engineering Technology programs in particular, industry has played a crucial role in many areas including advisement, financial support, and practical training of both faculty and students. Among the most important and intimate interactions are collaborative projects and formal cooperative education arrangements. Most recently, such collaborations have taken on a new dimension, as advances in technology have made possible meaningful technical collaboration at a distance. There are several obvious technology areas that have contributed significantly to this trend. Foremost is the ubiquitous presence of the Internet. Perhaps almost as important are advances in computer based imaging. Because visual images offer a compelling user experience, it affords greater knowledge transfer efficiency than other modes of delivery. Furthermore, the quality of the image appears to have a strongly correlated effect on insight. A good visualization facility offers both a means for communication and a shared information space for the subjects, which are among the essential features of both peer collaboration and distance learning.

  4. Modeling the carbon cost of plant nitrogen acquisition: Mycorrhizal trade-offs and multipath resistance uptake improve predictions of retranslocation

    NASA Astrophysics Data System (ADS)

    Brzostek, Edward R.; Fisher, Joshua B.; Phillips, Richard P.

    2014-08-01

    Accurate projections of the future land carbon (C) sink by terrestrial biosphere models depend on how nutrient constraints on net primary production are represented. While nutrient limitation is nearly universal, current models do not have a C cost for plant nutrient acquisition. Also missing are symbiotic mycorrhizal fungi, which can consume up to 20% of net primary production and supply up to 50% of a plant's nitrogen (N) uptake. Here we integrate simultaneous uptake and mycorrhizae into a cutting-edge plant N model—Fixation and Uptake of Nitrogen (FUN)—that can be coupled into terrestrial biosphere models. The C cost of N acquisition varies as a function of mycorrhizal type, with plants that support arbuscular mycorrhizae benefiting when N is relatively abundant and plants that support ectomycorrhizae benefiting when N is strongly limiting. Across six temperate forested sites (representing arbuscular mycorrhizal- and ectomycorrhizal-dominated stands and 176 site years), including multipath resistance improved the partitioning of N uptake between aboveground and belowground sources. Integrating mycorrhizae led to further improvements in predictions of N uptake from soil (R2 = 0.69 increased to R2 = 0.96) and from senescing leaves (R2 = 0.29 increased to R2 = 0.73) relative to the original model. On average, 5% and 9% of net primary production in arbuscular mycorrhizal- and ectomycorrhizal-dominated forests, respectively, was needed to support mycorrhizal-mediated acquisition of N. To the extent that resource constraints to net primary production are governed by similar trade-offs across all terrestrial ecosystems, integrating these improvements to FUN into terrestrial biosphere models should enhance predictions of the future land C sink.

  5. Speech measures indicating workload demand.

    PubMed

    Brenner, M; Doherty, E T; Shipp, T

    1994-01-01

    Heart rate and six speech measures were evaluated using a manual tracking task under different workload demands. Following training, 17 male subjects performed three task trials: a difficult trial, with a $50 incentive for successful performance at a very demanding level; an easy trial, with a $2 incentive for successful performance at a simple level; and a baseline trial, in which there was physiological monitoring but no tracking performance. Subjects counted aloud during the trials. It was found that heart rate, speaking fundamental frequency (pitch), and vocal intensity (loudness) increased significantly with workload demands. Speaking rate showed a marginal increase, while vocal jitter and vocal shimmer did not show reliable changes. A derived speech measure, which statistically combined information from all other speech measures except shimmer, was also evaluated. It increased significantly with workload demands and was surprisingly robust in showing differences for individual subjects. It appears that speech analysis can provide practical workload information.

  6. Industrial Demand Module - NEMS Documentation

    EIA Publications

    2014-01-01

    Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

  7. Residential Demand Module - NEMS Documentation

    EIA Publications

    2014-01-01

    Model Documentation - Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code.

  8. Saving Electricity and Demand Response

    NASA Astrophysics Data System (ADS)

    Yamaguchi, Nobuyuki

    A lot of people lost their lives in the tremendous earthquake in Tohoku region on March 11. A large capacity of electric power plants in TEPCO area was also damaged and large scale power shortage in this summer is predicted. In this situation, electricity customers are making great effort to save electricity to avoid planned outage. Customers take actions not only by their selves but also by some customers' cooperative movements. All actions taken actually are based on responses to request form the government or voluntary decision. On the other hand, demand response based on a financial stimulus is not observed as an actual behavior. Saving electricity by this demand response only discussed in the newspapers. In this commentary, the events regarding electricity-saving measure after this disaster are described and the discussions on demand response, especially a raise in power rate, are put into shapes in the context of this electricity supply-demand gap.

  9. Industrial Demand Module - NEMS Documentation

    EIA Publications

    2014-01-01

    Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

  10. Residential Demand Module - NEMS Documentation

    EIA Publications

    2017-01-01

    Model Documentation - Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code.

  11. Computational Imaging in Demanding Conditions

    DTIC Science & Technology

    2015-11-18

    AFRL-AFOSR-VA-TR-2015-0380 Computational Imaging in Demanding Conditions Peyman Milanfar UNIVERSITY OF CALIFORNIA SANTA CRUZ Final Report 11/18/2015...Computational Imaging in Demanding Conditions 5a. CONTRACT NUMBER FA9550-11-1-0227 5b. GRANT NUMBER FA9550-11-1-0227 5c. PROGRAM ELEMENT NUMBER... WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) University of California, Santa Cruz, 1156 High Street, Santa Cruz, CA 95064 8

  12. Demand Response Spinning Reserve Demonstration

    SciTech Connect

    Eto, Joseph H.; Nelson-Hoffman, Janine; Torres, Carlos; Hirth,Scott; Yinger, Bob; Kueck, John; Kirby, Brendan; Bernier, Clark; Wright,Roger; Barat, A.; Watson, David S.

    2007-05-01

    The Demand Response Spinning Reserve project is a pioneeringdemonstration of how existing utility load-management assets can providean important electricity system reliability resource known as spinningreserve. Using aggregated demand-side resources to provide spinningreserve will give grid operators at the California Independent SystemOperator (CAISO) and Southern California Edison (SCE) a powerful, newtool to improve system reliability, prevent rolling blackouts, and lowersystem operating costs.

  13. Demand, Energy, and Power Factor

    DTIC Science & Technology

    1994-08-01

    plants provide to the IAC, and in particular, the effects of demand, block extenders, and power factor on plant utility costs and energy conservation...costs. Education of plant personnel about these effects is also described. Another purpose of this report is to provide a listing of types of typical...the lAC, and in particular, the effects of demand, block extenders, and power factor on plant utility costs and energy conservation costs. 5 Education

  14. Multipath-switching device utilizing a GaAs-based multiterminal nanowire junction with size-controlled dual Schottky wrap gates

    NASA Astrophysics Data System (ADS)

    Kasai, Seiya; Nakamura, Tatsuya; Shiratori, Yuta

    2007-05-01

    A multipath-switching device using a multiterminal nanowire junction with size-controlled dual gates is proposed and demonstrated experimentally. The device switches a number of output terminals according to multiple-valued input voltages for electrons entering from a root terminal. The switching function is implemented by dual gating on multiple nanowires with different threshold voltages Vth. Systematic Vth shift is made by changing gate lengths in nanometer scale. A triple-path-switching device is fabricated using AlGaAs /GaAs etched nanowires and nanometer-scale Schottky wrap gates. Its correct operation is confirmed at room temperature. Obtained results are explained by a simple analytical model.

  15. Jets from a Distance

    NASA Image and Video Library

    2017-07-17

    Enceladus' intriguing south-polar jets are viewed from afar, backlit by sunlight while the moon itself glows softly in reflected Saturn-shine. Observations of the jets taken from various viewing geometries provide different insights into these remarkable features. Cassini has gathered a wealth of information in the hopes of unraveling the mysteries of the subsurface ocean that lurks beneath the moon's icy crust. This view looks toward the Saturn-facing hemisphere of Enceladus (313 miles or 504 kilometers across). North is up. The image was taken in visible light with the Cassini spacecraft narrow-angle camera on April 13, 2017. The view was acquired at a distance of approximately 502,000 miles (808,000 kilometers) from Enceladus and at a sun-Enceladus-spacecraft, or phase, angle of 176 degrees. Image scale is 3 miles (5 kilometers) per pixel. https://photojournal.jpl.nasa.gov/catalog/PIA21338

  16. Algebraic distance on graphs.

    SciTech Connect

    Chen, J.; Safro, I.

    2011-01-01

    Measuring the connection strength between a pair of vertices in a graph is one of the most important concerns in many graph applications. Simple measures such as edge weights may not be sufficient for capturing the effects associated with short paths of lengths greater than one. In this paper, we consider an iterative process that smooths an associated value for nearby vertices, and we present a measure of the local connection strength (called the algebraic distance; see [D. Ron, I. Safro, and A. Brandt, Multiscale Model. Simul., 9 (2011), pp. 407-423]) based on this process. The proposed measure is attractive in that the process is simple, linear, and easily parallelized. An analysis of the convergence property of the process reveals that the local neighborhoods play an important role in determining the connectivity between vertices. We demonstrate the practical effectiveness of the proposed measure through several combinatorial optimization problems on graphs and hypergraphs.

  17. Reconsidering Moore's Transactional Distance Theory

    ERIC Educational Resources Information Center

    Giossos, Yiannis; Koutsouba, Maria; Lionarakis, Antonis; Skavantzos, Kosmas

    2009-01-01

    One of the core theories of distance education is Michael Graham Moore's "Theory of Transactional Distance" that provides the broad framework of the pedagogy of distance education and allows the generation of almost infinite number of hypotheses for research. However, the review of the existing studies relating to the theory showed the use of a…

  18. Interactive Distance Learning in Connecticut.

    ERIC Educational Resources Information Center

    Pietras, Jesse John; Murphy, Robert J.

    This paper provides an overview of distance learning activities in Connecticut and addresses the feasibility of such activities. Distance education programs have evolved from the one dimensional electronic mail systems to the use of sophisticated digital fiber networks. The Middlesex Distance Learning Consortium has developed a long-range plan to…

  19. Teleteaching Distance Education. Final Report.

    ERIC Educational Resources Information Center

    Mansfield Univ., PA. Rural Services Inst.

    This study investigated the need for distance learning in Pennsylvania's rural schools, examined types of distance learning programs and technology currently being used, and identified factors that could enhance or inhibit the use of distance learning in rural schools. Data collection included (1) a literature search, (2) surveys administered to…

  20. Interactive Distance Learning in Connecticut.

    ERIC Educational Resources Information Center

    Pietras, Jesse John; Murphy, Robert J.

    This paper provides an overview of distance learning activities in Connecticut and addresses the feasibility of such activities. Distance education programs have evolved from the one dimensional electronic mail systems to the use of sophisticated digital fiber networks. The Middlesex Distance Learning Consortium has developed a long-range plan to…

  1. DISTANCES TO DARK CLOUDS: COMPARING EXTINCTION DISTANCES TO MASER PARALLAX DISTANCES

    SciTech Connect

    Foster, Jonathan B.; Jackson, James M.; Stead, Joseph J.; Hoare, Melvin G.; Benjamin, Robert A. E-mail: jackson@bu.edu E-mail: mgh@ast.leeds.ac.uk

    2012-06-01

    We test two different methods of using near-infrared extinction to estimate distances to dark clouds in the first quadrant of the Galaxy using large near-infrared (Two Micron All Sky Survey and UKIRT Infrared Deep Sky Survey) surveys. Very long baseline interferometry parallax measurements of masers around massive young stars provide the most direct and bias-free measurement of the distance to these dark clouds. We compare the extinction distance estimates to these maser parallax distances. We also compare these distances to kinematic distances, including recent re-calibrations of the Galactic rotation curve. The extinction distance methods agree with the maser parallax distances (within the errors) between 66% and 100% of the time (depending on method and input survey) and between 85% and 100% of the time outside of the crowded Galactic center. Although the sample size is small, extinction distance methods reproduce maser parallax distances better than kinematic distances; furthermore, extinction distance methods do not suffer from the kinematic distance ambiguity. This validation gives us confidence that these extinction methods may be extended to additional dark clouds where maser parallaxes are not available.

  2. An analysis of short haul air passenger demand, volume 2

    NASA Technical Reports Server (NTRS)

    Blumer, T. P.; Swan, W. M.

    1978-01-01

    Several demand models for short haul air travel are proposed and calibrated on pooled data. The models are designed to predict demand and analyze some of the motivating phenomena behind demand generation. In particular, an attempt is made to include the effects of competing modes and of alternate destinations. The results support three conclusions: (1) the auto mode is the air mode's major competitor; (2) trip time is an overriding factor in intermodal competition, with air fare at its present level appearing unimportant to the typical short haul air traveler; and (3) distance appears to underly several demand generating phenomena, and therefore, must be considered very carefully to any intercity demand model. It may be the cause of the wide range of fare elasticities reported by researchers over the past 15 years. A behavioral demand model is proposed and calibrated. It combines the travel generating effects of income and population, the effects of modal split, the sensitivity of travel to price and time, and the effect of alternative destinations satisfying the trip purpose.

  3. Supportive learning in distance education.

    PubMed

    Lawton, S

    1997-05-01

    This paper argues that tutorial support should enhance the learning experience of students who enrol on a distance education programme. A rationale for such support is given as well as a definition of support for distance learners. The complex role of the tutor in distance learning is described which suggests the need for tutor preparation, particularly for tutors adapting to this mode of course delivery. The paper reports on two existing models used within distance education which have focused on the outcome of study. The paper introduces an alternative model of supportive learning which focuses on the development of the educational experience throughout the length of a distance-learning course.

  4. Statistical and Clustering Based Rules Extraction Approaches for Fuzzy Model to Estimate Academic Performance in Distance Education

    ERIC Educational Resources Information Center

    Yildiz, Osman; Bal, Abdullah; Gulsecen, Sevinc

    2015-01-01

    The demand for distance education has been increasing at a rapid pace all around the world. This, in turn, places a special importance on the need for the development of more distance education systems. However, there is an alarming rise in the number of distance education students that drop out of the system without asking for any help. The…

  5. Statistical and Clustering Based Rules Extraction Approaches for Fuzzy Model to Estimate Academic Performance in Distance Education

    ERIC Educational Resources Information Center

    Yildiz, Osman; Bal, Abdullah; Gulsecen, Sevinc

    2015-01-01

    The demand for distance education has been increasing at a rapid pace all around the world. This, in turn, places a special importance on the need for the development of more distance education systems. However, there is an alarming rise in the number of distance education students that drop out of the system without asking for any help. The…

  6. Physical demands of representative match play in adolescent rugby union.

    PubMed

    Read, Dale B; Jones, Ben; Phibbs, Padraic J; Roe, Gregory A B; Darrall-Jones, Joshua; Weakley, Jonathon J S; Till, Kevin

    2016-08-18

    The purpose of this study was to quantify the physical demands of representative adolescent rugby union match-play and investigate the difference between playing positions and age groups. Players (n=112) were classified into 6 groups by playing position (forwards and backs) and age group (U16, U18, U20). The physical demands were measured using microsensor-based technology and analysed using magnitude based inferences to assess practical importance. Backs had a greater relative distance (except U16s) and a greater high-speed running distance per minute than forwards, with the magnitude of difference between the positions becoming larger in older age groups. Forwards had higher values of PlayerLoad per minute (accumulated accelerations from the three axes of movement) and PlayerLoad slow per minute (accumulated accelerations from the three axes of movement where velocity is <2 m.s) than backs at all age groups. Relative distance, low- and high-speed running per minute all had a trend to be lower in older age groups for both positions. PlayerLoad per minute was greater in U18 than U16 and U20 for both positions. PlayerLoad slow per minute was greater for older age groups besides the U18 and U20 comparisons, which were unclear. The contrasts in physical demands experienced by different positions reinforce the need for greater exposure to sprinting and collision based activity for backs and forwards, respectively. Given PlayerLoad metrics peak at U18 and locomotor demands seem to be lower in older ages, the demands of representative adolescent rugby union do not seem to be greater at U20 as expected.

  7. Scalable parallel distance field construction for large-scale applications

    DOE PAGES

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan -Liu; ...

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. Anew distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking overtime, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate itsmore » efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. In conclusion, our work greatly extends the usability of distance fields for demanding applications.« less

  8. Communication Barriers in Distance Education: "Text-Based Internet-Enabled Online Courses"

    ERIC Educational Resources Information Center

    Dabaj, Fahme; Isman, Aytekin

    2004-01-01

    With the rapid technological changes and the diverse people demands and conditions, traditional educational systems and institutions are forced to provide additional educational opportunities. A number of educational establishments are contributing to these conditions and demands by developing and offering distance education programs. Distance…

  9. Open and Distance Learning: An Emerging System for Alternative Higher Education in Nigeria

    ERIC Educational Resources Information Center

    Ibara, Emmanuel Chisa

    2008-01-01

    Nigeria no doubt is at the threshold of transformation in information and communication technology (ICT), a development that should be utilized to meet the demand of time, especially in the education sector. One area in which ICT has made enormous impact is in open and distance learning. Undoubtedly, the demand on the conventional higher education…

  10. Energy supply and demand in California

    NASA Technical Reports Server (NTRS)

    Griffith, E. D.

    1978-01-01

    The author expresses his views on future energy demand on the west coast of the United States and how that energy demand translates into demand for major fuels. He identifies the major uncertainties in determining what future demands may be. The major supply options that are available to meet projected demands and the policy implications that flow from these options are discussed.

  11. A matter of distance

    NASA Image and Video Library

    2017-04-24

    In space, being outshone is an occupational hazard. This NASA/ESA Hubble Space Telescope image captures a galaxy named NGC 7250. Despite being remarkable in its own right — it has bright bursts of star formation and recorded supernova explosions — it blends into the background somewhat thanks to the gloriously bright star hogging the limelight next to it. This bright object is a single and little-studied star named TYC 3203-450-1, located in the constellation of Lacerta (The Lizard), much closer than the much more distant galaxy. Only this way a normal star can outshine an entire galaxy, consisting of billions of stars. Astronomers studying distant objects call these stars “foreground stars” and they are often not very happy about them, as their bright light is contaminating the faint light from the more distant and interesting objects they actually want to study. In this case TYC 3203-450-1 million times closer than NGC 7250 which lies over 45 million light-years away from us. Would the star be the same distance as NGC 7250, it would hardly be visible in this image.

  12. Physical Education Students' Perceptions of the Effectiveness of Their Distance Education Courses

    ERIC Educational Resources Information Center

    Frimming, Renee E.; Bordelon, Thomas D.

    2016-01-01

    Background: Because of the increasing demand from students to have available to them distance education courses, it is vital to offer students health and physical education distance education courses that meet their need for a challenging and rewarding educational experience. In this pilot study, we explored the learning experiences of students…

  13. Empirical Investigation into Motives for Choosing Web-Based Distance Learning Programs

    ERIC Educational Resources Information Center

    Alkhattabi, Mona

    2016-01-01

    Today, in association with rapid social and economic changes, there is an increasing level of demand for distance and online learning programs. This study will focus on identifying the main motivational factors for choosing a web-based distance-learning program. Moreover, it will investigate how these factors relate to age, gender, marital status…

  14. Empirical Investigation into Motives for Choosing Web-Based Distance Learning Programs

    ERIC Educational Resources Information Center

    Alkhattabi, Mona

    2016-01-01

    Today, in association with rapid social and economic changes, there is an increasing level of demand for distance and online learning programs. This study will focus on identifying the main motivational factors for choosing a web-based distance-learning program. Moreover, it will investigate how these factors relate to age, gender, marital status…

  15. extinction-distances: Estimating distances to dark clouds

    NASA Astrophysics Data System (ADS)

    Foster, Jonathan

    2017-08-01

    Extinction-distances uses the number of foreground stars and a Galactic model of the stellar distribution to estimate the distance to dark clouds. It exploits the relatively narrow range of intrinsic near-infrared colors of stars to separate foreground from background stars. An advantage of this method is that the distribution of stellar colors in the Galactic model need not be precisely correct, only the number density as a function of distance from the Sun.

  16. Fundamental Travel Demand Model Example

    NASA Technical Reports Server (NTRS)

    Hanssen, Joel

    2010-01-01

    Instances of transportation models are abundant and detailed "how to" instruction is available in the form of transportation software help documentation. The purpose of this paper is to look at the fundamental inputs required to build a transportation model by developing an example passenger travel demand model. The example model reduces the scale to a manageable size for the purpose of illustrating the data collection and analysis required before the first step of the model begins. This aspect of the model development would not reasonably be discussed in software help documentation (it is assumed the model developer comes prepared). Recommendations are derived from the example passenger travel demand model to suggest future work regarding the data collection and analysis required for a freight travel demand model.

  17. International Oil Supplies and Demands

    SciTech Connect

    Not Available

    1991-09-01

    The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

  18. International Oil Supplies and Demands

    SciTech Connect

    Not Available

    1992-04-01

    The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

  19. Turkey's energy demand and supply

    SciTech Connect

    Balat, M.

    2009-07-01

    The aim of the present article is to investigate Turkey's energy demand and the contribution of domestic energy sources to energy consumption. Turkey, the 17th largest economy in the world, is an emerging country with a buoyant economy challenged by a growing demand for energy. Turkey's energy consumption has grown and will continue to grow along with its economy. Turkey's energy consumption is high, but its domestic primary energy sources are oil and natural gas reserves and their production is low. Total primary energy production met about 27% of the total primary energy demand in 2005. Oil has the biggest share in total primary energy consumption. Lignite has the biggest share in Turkey's primary energy production at 45%. Domestic production should be to be nearly doubled by 2010, mainly in coal (lignite), which, at present, accounts for almost half of the total energy production. The hydropower should also increase two-fold over the same period.

  20. Performance analysis of precoding-based asymmetrically clipped optical orthogonal frequency division multiplexing wireless system in additive white Gaussian noise and indoor multipath channel

    NASA Astrophysics Data System (ADS)

    Ranjha, Bilal; Zhou, Zhou; Kavehrad, Mohsen

    2014-08-01

    We have compared the bit error rate (BER) performance of precoding-based asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) and pulse amplitude modulated discrete multitone (PAM-DMT) optical wireless (OW) systems in additive white Gaussian noise (AWGN) and indoor multipath frequency selective channel. Simulation and analytical results show that precoding schemes such as discrete Fourier transform, discrete cosine transform, and Zadoff-Chu sequences do not affect the performance of the OW systems in the AWGN channel while they do reduce the peak-to-average power ratio (PAPR) of the OFDM output signal. However, in a multipath indoor channel, using zero forcing frequency domain equalization precoding-based systems give better BER performance than their conventional counterparts. With additional clipping to further reduce the PAPR, precoding-based systems also show better BER performance compared to nonprecoded systems when clipped relative to the peak of nonprecoded systems. Therefore, precoding-based ACO-OFDM and PAM-DMT systems offer better BER performance, zero signaling overhead, and low PAPR compared to conventional systems.

  1. Statistical multi-path exposure method for assessing the whole-body SAR in a heterogeneous human body model in a realistic environment.

    PubMed

    Vermeeren, Günter; Joseph, Wout; Martens, Luc

    2013-04-01

    Assessing the whole-body absorption in a human in a realistic environment requires a statistical approach covering all possible exposure situations. This article describes the development of a statistical multi-path exposure method for heterogeneous realistic human body models. The method is applied for the 6-year-old Virtual Family boy (VFB) exposed to the GSM downlink at 950 MHz. It is shown that the whole-body SAR does not differ significantly over the different environments at an operating frequency of 950 MHz. Furthermore, the whole-body SAR in the VFB for multi-path exposure exceeds the whole-body SAR for worst-case single-incident plane wave exposure by 3.6%. Moreover, the ICNIRP reference levels are not conservative with the basic restrictions in 0.3% of the exposure samples for the VFB at the GSM downlink of 950 MHz. The homogeneous spheroid with the dielectric properties of the head suggested by the IEC underestimates the absorption compared to realistic human body models. Moreover, the variation in the whole-body SAR for realistic human body models is larger than for homogeneous spheroid models. This is mainly due to the heterogeneity of the tissues and the irregular shape of the realistic human body model compared to homogeneous spheroid human body models.

  2. New distances to RAVE stars

    NASA Astrophysics Data System (ADS)

    Binney, J.; Burnett, B.; Kordopatis, G.; McMillan, P. J.; Sharma, S.; Zwitter, T.; Bienaymé, O.; Bland-Hawthorn, J.; Steinmetz, M.; Gilmore, G.; Williams, M. E. K.; Navarro, J.; Grebel, E. K.; Helmi, A.; Parker, Q.; Reid, W. A.; Seabroke, G.; Watson, F.; Wyse, R. F. G.

    2014-01-01

    Probability density functions (pdfs) are determined from new stellar parameters for the distance moduli of stars for which the RAdial Velocity Experiment (RAVE) has obtained spectra with S/N ≥ 10. Single-Gaussian fits to the pdf in distance modulus suffice for roughly half the stars, with most of the other half having satisfactory two-Gaussian representations. As expected, early-type stars rarely require more than one Gaussian. The expectation value of distance is larger than the distance implied by the expectation of distance modulus; the latter is itself larger than the distance implied by the expectation value of the parallax. Our parallaxes of Hipparcos stars agree well with the values measured by Hipparcos, so the expectation of parallax is the most reliable distance indicator. The latter are improved by taking extinction into account. The effective temperature-absolute magnitude diagram of our stars is significantly improved when these pdfs are used to make the diagram. We use the method of kinematic corrections devised by Schönrich, Binney and Asplund to check for systematic errors for general stars and confirm that the most reliable distance indicator is the expectation of parallax. For cool dwarfs and low-gravity giants, <ϖ> tends to be larger than the true distance by up to 30 per cent. The most satisfactory distances are for dwarfs hotter than 5500 K. We compare our distances to stars in 13 open clusters with cluster distances from the literature and find excellent agreement for the dwarfs and indications that we are overestimating distances to giants, especially in young clusters.

  3. Demand Controlled Ventilation and Classroom Ventilation

    SciTech Connect

    Fisk, William J.; Mendell, Mark J.; Davies, Molly; Eliseeva, Ekaterina; Faulkner, David; Hong, Tienzen; Sullivan, Douglas P.

    2012-05-01

    This document summarizes a research effort on demand controlled ventilation and classroom ventilation. The research on demand controlled ventilation included field studies and building energy modeling.

  4. Commercial Demand Module - NEMS Documentation

    EIA Publications

    2014-01-01

    Documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components.

  5. Projecting Electricity Demand in 2050

    SciTech Connect

    Hostick, Donna J.; Belzer, David B.; Hadley, Stanton W.; Markel, Tony; Marnay, Chris; Kintner-Meyer, Michael C. W.

    2014-07-01

    This paper describes the development of end-use electricity projections and load curves that were developed for the Renewable Electricity (RE) Futures Study (hereafter RE Futures), which explored the prospect of higher percentages (30% - 90%) of total electricity generation that could be supplied by renewable sources in the United States. As input to RE Futures, two projections of electricity demand were produced representing reasonable upper and lower bounds of electricity demand out to 2050. The electric sector models used in RE Futures required underlying load profiles, so RE Futures also produced load profile data in two formats: 8760 hourly data for the year 2050 for the GridView model, and in 2-year increments for 17 time slices as input to the Regional Energy Deployment System (ReEDS) model. The process for developing demand projections and load profiles involved three steps: discussion regarding the scenario approach and general assumptions, literature reviews to determine readily available data, and development of the demand curves and load profiles.

  6. Employer Demands from Business Graduates

    ERIC Educational Resources Information Center

    McMurray, Stephen; Dutton, Matthew; McQuaid, Ronald; Richard, Alec

    2016-01-01

    Purpose: The purpose of this paper is to report on research carried out with employers to determine demand for business and management skills in the Scottish workforce. Design/methodology/approach: The research used a questionnaire in which employers were interviewed (either telephone or face to face), completed themselves and returned by e-mail,…

  7. Faculty Demand in Higher Education

    ERIC Educational Resources Information Center

    Rosenthal, Danielle

    2007-01-01

    The objective of this study is to identify the factors that shift the demand curve for faculty at not-for-profit private institutions. It is unique in that to the author's knowledge no other study has directly addressed the question of how the positive correlation between average faculty salaries and faculty-student ratios can be reconciled with…

  8. Towards Real Information on Demand.

    ERIC Educational Resources Information Center

    Barker, Philip

    The phrase "information on demand" is often used to describe situations in which digital electronic information can be delivered to particular points of need at times and in ways that are determined by the specific requirements of individual consumers or client groups. The advent of "mobile" computing equipment now makes the…

  9. Smart Buildings and Demand Response

    NASA Astrophysics Data System (ADS)

    Kiliccote, Sila; Piette, Mary Ann; Ghatikar, Girish

    2011-11-01

    Advances in communications and control technology, the strengthening of the Internet, and the growing appreciation of the urgency to reduce demand side energy use are motivating the development of improvements in both energy efficiency and demand response (DR) systems in buildings. This paper provides a framework linking continuous energy management and continuous communications for automated demand response (Auto-DR) in various times scales. We provide a set of concepts for monitoring and controls linked to standards and procedures such as Open Automation Demand Response Communication Standards (OpenADR). Basic building energy science and control issues in this approach begin with key building components, systems, end-uses and whole building energy performance metrics. The paper presents a framework about when energy is used, levels of services by energy using systems, granularity of control, and speed of telemetry. DR, when defined as a discrete event, requires a different set of building service levels than daily operations. We provide examples of lessons from DR case studies and links to energy efficiency.

  10. Employer Demands from Business Graduates

    ERIC Educational Resources Information Center

    McMurray, Stephen; Dutton, Matthew; McQuaid, Ronald; Richard, Alec

    2016-01-01

    Purpose: The purpose of this paper is to report on research carried out with employers to determine demand for business and management skills in the Scottish workforce. Design/methodology/approach: The research used a questionnaire in which employers were interviewed (either telephone or face to face), completed themselves and returned by e-mail,…

  11. The Evolving Demand for Skills.

    ERIC Educational Resources Information Center

    Greenspan, Alan

    From a macroeconomic perspective, the evolving demand for skills in the United States has been triggered by the accelerated expansion of computer and information technology, which has, in turn, brought significant changes to the workplace. Technological advances have made some wholly manual jobs obsolete. But even for many other workers, a rapidly…

  12. Commercial Demand Module - NEMS Documentation

    EIA Publications

    2017-01-01

    Documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components.

  13. Demand Characteristics, Moods, and Helping

    ERIC Educational Resources Information Center

    Wispe, Lauren; And Others

    1977-01-01

    Procedures used in empathy-helping studies suggest results may be due to demand characteristics. Two studies were run to investigate especially the mood induction process. One reproduced the Aderman-Berkowitz main mood effects. Another showed that after seeing a help-non-help incident, mood effects were demonstrated only when Ss knew the research…

  14. Residential electricity demand in Arkansas

    NASA Astrophysics Data System (ADS)

    Resendez, Ileana M.

    This study analyzes residential electricity demand in Arkansas. Explanatory variables utilized include real per capita income, residential electricity price, heating degree days, cooling degree days, and residential natural gas price. The results indicate that the income effect dominates the substitution effect given a real personal income increase and a decline in real electricity rates in the state of Arkansas during the period under study.

  15. Approximating subtree distances between phylogenies.

    PubMed

    Bonet, Maria Luisa; St John, Katherine; Mahindru, Ruchi; Amenta, Nina

    2006-10-01

    We give a 5-approximation algorithm to the rooted Subtree-Prune-and-Regraft (rSPR) distance between two phylogenies, which was recently shown to be NP-complete. This paper presents the first approximation result for this important tree distance. The algorithm follows a standard format for tree distances. The novel ideas are in the analysis. In the analysis, the cost of the algorithm uses a "cascading" scheme that accounts for possible wrong moves. This accounting is missing from previous analysis of tree distance approximation algorithms. Further, we show how all algorithms of this type can be implemented in linear time and give experimental results.

  16. Transactional Distance and Autonomy in a Distance Learning Environment

    ERIC Educational Resources Information Center

    Vasiloudis, G.; Koutsouba, M.; Giossos, Y.; Mavroidis, I.

    2015-01-01

    This paper studies the transactional distance between the students and the tutor as well as the autonomy of students in a postgraduate course of the Hellenic Open University (HOU). The aim of the paper is to examine how the relation between autonomy and transactional distance evolves during an academic year and how this relation is affected by…

  17. Policy Deficit in Distance Education: A Transactional Distance

    ERIC Educational Resources Information Center

    Gokool-Ramdoo, Sushita

    2009-01-01

    This paper innovatively extends the application of transactional distance theory (TDT) to evidence-based policy development in Mauritius. In-depth interview data on student persistence from a range of stakeholders is used to understand the implications of distance education (DE) policy deficit. Policy deficit has surfaced as another dimension of…

  18. Transactional Distance and Autonomy in a Distance Learning Environment

    ERIC Educational Resources Information Center

    Vasiloudis, G.; Koutsouba, M.; Giossos, Y.; Mavroidis, I.

    2015-01-01

    This paper studies the transactional distance between the students and the tutor as well as the autonomy of students in a postgraduate course of the Hellenic Open University (HOU). The aim of the paper is to examine how the relation between autonomy and transactional distance evolves during an academic year and how this relation is affected by…

  19. Lifelong Learning & Distance Higher Education. Perspectives on Distance Education

    ERIC Educational Resources Information Center

    McIntosh, Christopher, Ed.

    2005-01-01

    Reflecting a common objective of ensuring quality Education for All, this book is a joint initiative of UNESCO and COL and jointly published. Lifelong Learning in Distance Higher Education brings together a diverse group of experts from many countries. The book provides a clear picture of the challenges, problems and potential of distance higher…

  20. Self-mixing laser sensor for short-distances measurement

    NASA Astrophysics Data System (ADS)

    Norgia, Michele; Kun, Li; Palludo, Alessandro; Cavedo, Federico; Pesatori, Alessandro

    2016-06-01

    This work describes the development of a laser instrument for measuring very-short distances with a minimum sensor size. The absolute distance measurement is obtained through a modulated self-mixing interferometer, realized with a lens-less red VCSEL laser. In a range between 2 mm and 5 mm the sensor shows a resolution of 10 µm at 6.6 kHz of acquisition rate. The sensor size is limited to the laser chip and the contacts; therefore, it is applicable also in very demanding applications, such as the diameter measurement of a hole.

  1. Predicting maximal aerobic speed through set distance time-trials.

    PubMed

    Bellenger, Clint R; Fuller, Joel T; Nelson, Maximillian J; Hartland, Micheal; Buckley, Jonathan D; Debenedictis, Thomas A

    2015-12-01

    Knowledge of aerobic performance capacity allows for the optimisation of training programs in aerobically dominant sports. Maximal aerobic speed (MAS) is a measure of aerobic performance; however, the time and personnel demands of establishing MAS are considerable. This study aimed to determine whether time-trials (TT), which are shorter and less onerous than traditional MAS protocols, may be used to predict MAS. 28 Australian Rules football players completed a test of MAS, followed by TTs of six different distances in random order, each separated by at least 48 h. Half of the participants completed TT distances of 1200, 1600 and 2000 m, and the others completed distances of 1400, 1800 and 2200 m. Average speed for the 1200 and 1400 m TTs were greater than MAS (P < 0.01). Average speed for 1600, 1800, 2000 and 2200 m TTs were not different from MAS (P > 0.08). Average speed for all TT distances correlated with MAS (r = 0.69-0.84; P < 0.02), but there was a negative association between the difference in average TT speed and MAS with increasing TT distance (r = -0.79; P < 0.01). Average TT speed over the 2000 m distance exhibited the best agreement with MAS. MAS may be predicted from the average speed during a TT for any distance between 1200 and 2200 m, with 2000 m being optimal. Performance of a TT may provide a simple alternative to traditional MAS testing.

  2. How perceived egocentric distance varies with changes in tonic vergence.

    PubMed

    Priot, Anne-Emmanuelle; Neveu, Pascaline; Sillan, Olivier; Plantier, Justin; Roumes, Corinne; Prablanc, Claude

    2012-06-01

    According to the eye muscle potentiation (EMP) hypothesis, sustained vergence leads to changes in egocentric perceived distance. This perceptual effect has been attributed to a change in the resting or tonic state of vergence. The goal of the present study was to test the EMP hypothesis by quantifying the relationship between prism-induced changes in tonic vergence and corresponding changes in perceived distance and by measuring the dynamics of changes in perceived distance. During a 10-min exposure to 5-diopter base-out prisms that increased the vergence demand, thirteen right-handed subjects pointed to visual targets located within reaching space using their left hand, without visual feedback. Pre- and post-exposure tests assessed tonic vergence through phoria measurements and egocentric distance estimate through pointing to visual targets with each hand successively, without visual feedback. Similar distance aftereffects were observed for both hands, although only the left hand was used during exposure, indicating that these aftereffects are mediated by visual processes rather than by visuomotor interactions. The distance aftereffects were significantly correlated with prism-induced changes in phoria, demonstrating a relationship between perceived distance and the level of tonic vergence. Changes in perceived distance increased monotonically across trials during prism exposure and remained stable during the post-test, indicating a long time constant for these perceptual effects, consistent with current models of the vergence control system. Overall, these results support the hypothesis that vergence plays a role in reduced-cue distance perception. They further illustrate that variations in tonic vergence influence perceived distance by altering the sensed vergence effort.

  3. The alchemy of demand response: turning demand into supply

    SciTech Connect

    Rochlin, Cliff

    2009-11-15

    Paying customers to refrain from purchasing products they want seems to run counter to the normal operation of markets. Demand response should be interpreted not as a supply-side resource but as a secondary market that attempts to correct the misallocation of electricity among electric users caused by regulated average rate tariffs. In a world with costless metering, the DR solution results in inefficiency as measured by deadweight losses. (author)

  4. Addressing Energy Demand through Demand Response. International Experiences and Practices

    SciTech Connect

    Shen, Bo; Ghatikar, Girish; Ni, Chun Chun; Dudley, Junqiao; Martin, Phil; Wikler, Greg

    2012-06-01

    Demand response (DR) is a load management tool which provides a cost-effective alternative to traditional supply-side solutions to address the growing demand during times of peak electrical load. According to the US Department of Energy (DOE), demand response reflects “changes in electric usage by end-use customers from their normal consumption patterns in response to changes in the price of electricity over time, or to incentive payments designed to induce lower electricity use at times of high wholesale market prices or when system reliability is jeopardized.” 1 The California Energy Commission (CEC) defines DR as “a reduction in customers’ electricity consumption over a given time interval relative to what would otherwise occur in response to a price signal, other financial incentives, or a reliability signal.” 2 This latter definition is perhaps most reflective of how DR is understood and implemented today in countries such as the US, Canada, and Australia where DR is primarily a dispatchable resource responding to signals from utilities, grid operators, and/or load aggregators (or DR providers).

  5. Running demands and heart rate response in rugby sevens referees.

    PubMed

    Suarez-Arrones, Luis; Calvo-Lluch, África; Portillo, Javier; Sánchez, Francisco; Mendez-Villanueva, Alberto

    2013-06-01

    The purpose of this study was to examine for the first time the match running demands and heart rate (HR) responses associated with elite rugby sevens referees. Twelve referees were analyzed over 38 games, using Global Positioning System. Referees covered an average distance of 1665.2 ± 203.5 m per game (15.1 ± 0.5 minutes). Over this distance, 22.3% (371.8 ± 48.9 m) was spent standing and walking, 25.9% (431.2 ± 92.6 m) jogging, 12.4% (206.5 ± 53.2 m) cruising, 23.8% (395.6 ± 94.3 m) striding, 8% (133.3 ± 61.6 m) high-intensity running, and 7.6% (126.7 ± 87.3 m) sprinting. The average maximal distance of sprints, the number of sprints, and the mean sprint distance over the game were 31.3 ± 13.4 m, 5.76 ± 3.6 sprints, and 19.9 ± 7.8 m, respectively. The referee's work-to-rest ratio was 3.5:1. There were no statistical differences between the first and second half in any of the running variables analyzed. The average HR in the second half (160 ± 9 b·min(-1); 86 ± 5% maximal heart rate (HRmax) of the estimated) was higher (p < 0.05) than the HR recorded in the first half (154 ± 11 b·min(-1); 83 ± 6% of the estimated HRmax). This study also suggests that the physical demands of referring in rugby sevens are quite different from those encountered in other rugby codes, and the training regimes need to meet the increased overall running demands and high-intensity running activity.

  6. Physical Demands in Competitive Ultimate Frisbee.

    PubMed

    Krustrup, Peter; Mohr, Magni

    2015-12-01

    The objective was to study game demands in competitive ultimate Frisbee by performing match analysis during a game. Thirteen moderately trained (Yo-Yo intermittent recovery test levels 1 and 2 [Yo-Yo IR1 and IR2] performance: 1790 ± 382 m and 657 ± 225 m, respectively) competitive male ultimate Frisbee athletes played a game in which activity profile using Global Positioning System (GPS) technology and heart rate (HR) were recorded. Game HRmean and HRpeak were 82 ± 2% and 99 ± 1% of maximum heart rate, respectively. Total game distance was 4.70 ± 0.47 km, of which 0.63 ± 0.14 km was high-intensity running and 0.21 ± 0.11 km was sprinting. In the second half, 10% less (p ≤ 0.05) ground was covered with high-intensity running compared with the first half (0.28 ± 0.08 km vs. 0.31 ± 0.07 km). Less (43-47%; p ≤ 0.05) high-intensity running was performed in the third 9-minute period of each half compared with the first two 9-minute periods of the same half. Players performed 17.4 ± 5.7 sprints during the match. Yo-Yo IR2 performance correlated to the amount of high-intensity running in the last 9 minutes of both halves (r = 0.69, p ≤ 0.05), whereas Yo-Yo IR1 performance correlated with total sprint distance (r = 0.74, p ≤ 0.05). Ultimate Frisbee is an intense intermittent team sport with high cardiovascular loading and clear indications of fatigue toward the end of each half. Yo-Yo IR test performances correlate with physical match performance.

  7. Directory of Distance Education Professionals.

    ERIC Educational Resources Information Center

    Bhushan, Bharat, Ed.; Rausaria, R. R., Ed.

    This directory of distance education professionals in India covers personnel working in open universities, correspondence course institutes, and directorates of distance education of conventional universities and other national level research institutes. The information was derived from a set of structured questionnaires sent to all involved…

  8. Interactive Television and Distance Learning.

    ERIC Educational Resources Information Center

    Rees, Fred J.; Downs, Dennis A.

    1995-01-01

    Describes the origins and operations of the Iowa Communications Network, an interactive distance learning program. Presents several examples of how the network can benefit music educators in college and K-12 institutions. Maintains that the system can be a model for similar distance music education networks. (CFR)

  9. Blogging for the Distance Librarian

    ERIC Educational Resources Information Center

    Pival, Paul R.

    2005-01-01

    Based on user lookups, "Merriam-Webster Online "proclaimed "Blog" the word of the year for 2004. Distance librarianship, until mid-way through 2004, was a subject that was underrepresented in the blogosphere. The inception of a blog called "The Distant Librarian: Comments on the World of Distance Librarianship" is chronicled in this article, along…

  10. The Distance to M104

    NASA Astrophysics Data System (ADS)

    McQuinn, Kristen. B. W.; Skillman, Evan D.; Dolphin, Andrew E.; Berg, Danielle; Kennicutt, Robert

    2016-11-01

    M104 (NGC 4594; the Sombrero galaxy) is a nearby, well-studied elliptical galaxy included in scores of surveys focused on understanding the details of galaxy evolution. Despite the importance of observations of M104, a consensus distance has not yet been established. Here, we use newly obtained Hubble Space Telescope optical imaging to measure the distance to M104 based on the tip of the red giant branch (TRGB) method. Our measurement yields the distance to M104 to be 9.55 ± 0.13 ± 0.31 Mpc equivalent to a distance modulus of 29.90 ± 0.03 ± 0.07 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian maximum likelihood technique that reduces measurement uncertainties. The most discrepant previous results are due to Tully-Fisher method distances, which are likely inappropriate for M104 given its peculiar morphology and structure. Our results are part of a larger program to measure accurate distances to a sample of well-known spiral galaxies (including M51, M74, and M63) using the TRGB method. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

  11. Distance Education and Developing Countries.

    ERIC Educational Resources Information Center

    Daniel, John S.

    The purpose of this paper is to give those who work in distance education a better awareness of the factors at work in developing nations and to help those whose profession is national development gain a fuller understanding of distance education. It begins with a discussion of the process of national development which focuses on the factors that…

  12. Quality Content in Distance Education

    ERIC Educational Resources Information Center

    Yildiz, Ezgi Pelin; Isman, Aytekin

    2016-01-01

    In parallel with technological advances in today's world of education activities can be conducted without the constraints of time and space. One of the most important of these activities is distance education. The success of the distance education is possible with content quality. The proliferation of e-learning environment has brought a need for…

  13. Distance Educator: A Multiskill Personality

    ERIC Educational Resources Information Center

    Malik, Sangeeta

    2013-01-01

    When we talk about a distance educator and a conventional educator the difference we found about both of them is that a distance educator needs to play multiple roles as compared to a conventional educator. They require more skills and knowledge to cater to the needs of the learner. In this article we will cover all the responsible areas of a…

  14. Virtual Bioinformatics Distance Learning Suite

    ERIC Educational Resources Information Center

    Tolvanen, Martti; Vihinen, Mauno

    2004-01-01

    Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material…

  15. USAF Initiatives in Distance Learning.

    ERIC Educational Resources Information Center

    Wolfe, Thomas E.

    1996-01-01

    Examines the expansive growth of distance learning in the United States Air Force (USAF). Highlights include interactive television and the Air Technology Network that uses satellites; computer-based instruction; online electronic campus; multimedia interactive courseware; CD-ROM; distance learning benefits; data collection; administration; and…

  16. Distance Learning: The Essential Guide.

    ERIC Educational Resources Information Center

    Williams, Marcia L.; Paprock, Kenneth; Covington, Barbara

    Intended for individuals engaged in open and distance learning activities, this guide is designed with an applications focus that provides a "quick start" for immediate work needs. Built on an intuitive set of "How do I" questions, the book presents the foundation needed to teach from a distance. The format is a multimodel approach, combining…

  17. The Distance to M51

    NASA Astrophysics Data System (ADS)

    McQuinn, Kristen. B. W.; Skillman, Evan D.; Dolphin, Andrew E.; Berg, Danielle; Kennicutt, Robert

    2016-07-01

    Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51—the Whirlpool galaxy—from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58 ± 0.10 Mpc (statistical), corresponding to a distance modulus of 29.67 ± 0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

  18. Distance Learning: Practice and Dilemmas

    ERIC Educational Resources Information Center

    Tatkovic, Nevenka; Sehanovic, Jusuf; Ruzic, Maja

    2006-01-01

    In accordance with the European processes of integrated and homogeneous education, the paper presents the essential viewpoints and questions covering the establishment and development of "distance learning" (DL) in Republic of Croatia. It starts from the advantages of distance learning versus traditional education taking into account…

  19. USAF Initiatives in Distance Learning.

    ERIC Educational Resources Information Center

    Wolfe, Thomas E.

    1996-01-01

    Examines the expansive growth of distance learning in the United States Air Force (USAF). Highlights include interactive television and the Air Technology Network that uses satellites; computer-based instruction; online electronic campus; multimedia interactive courseware; CD-ROM; distance learning benefits; data collection; administration; and…

  20. Distance Education: Educational Trajectory Control

    ERIC Educational Resources Information Center

    Isaev, Andrey; Kravets, Alla; Isaeva, Ludmila; Fomenkov, Sergey

    2013-01-01

    Distance education has become a rather popular form of education recently. The advantages of this form are obvious and well-known. They include asynchronous learning, individualized learning trajectories and convenient case technologies. However, the distance form of education is not able to form the trainee's hands-on experience, especially…

  1. Examining Distance Education in Turkey.

    ERIC Educational Resources Information Center

    McIsaac, Marina Stock; And Others

    1988-01-01

    Describes the distance education program at Anadolu University in Turkey and compares its problems and solutions with similar distance programs in other Asian countries. A brief history is presented, enrollment figures are given, and future directions are described. (Author/LRW)

  2. Distance Education in Rural Areas.

    ERIC Educational Resources Information Center

    Zucker, Henry

    This discussion of social and political aspects, advantages and disadvantages of distance education programs includes descriptions and examples of delivery technologies and programs in developing and developed countries. Among the social aspects considered are distance education's potential to provide a second chance to people who are trapped by…

  3. Is Distance Education for You?

    ERIC Educational Resources Information Center

    Walter, Laura M.

    2004-01-01

    Millions of Americans are currently enrolled in distance learning institutions. The flexible study schedules, independent learning, and self-paced courses are attracting more students than ever. Those interested in enrolling in a distance education school, probably have a lot of questions. Choosing the right school is an important decision, and…

  4. Distance Education: A Cost Analysis.

    ERIC Educational Resources Information Center

    Jones, Judy I.; Simonson, Michael

    The costs of three types of transmission technology in distance education are compared, and the costs for equipping and installing a distance education classroom are estimated. Two of the technologies--fiber optics and microwave--deliver two-way, full motion video and two-way audio. The third technology, compressed video, also delivers two-way…

  5. Adult Education at a Distance.

    ERIC Educational Resources Information Center

    Gaudet, Alphonse

    This document, which examines the use of educational technologies for distance education for adults in Canada, consists of five narrative sections and a bibliography. The first section introduces the topic and the document's objectives (to describe those technologies used in Canadian adult distance education, paying particular attention to those…

  6. Multimedia Equipment for Distance Education.

    ERIC Educational Resources Information Center

    Schiller, Scott S.

    1993-01-01

    Discusses the use of multimedia equipment for distance education. Topics addressed include use of the Internet; distance learning for educators; and cable television and/or fiber optics, including interactive television and satellite technology. A sidebar lists online and telecommunications providers. (LRW)

  7. Faculty Attitudes about Distance Education

    ERIC Educational Resources Information Center

    Smidt, Esther; McDyre, Brian; Bunk, Jennifer; Li, Rui; Gatenby, Tanya

    2014-01-01

    In recent years, there has been a dramatic increase in distance learning in higher education. Given this, it is extremely important to understand faculty attitudes about distance education, not only because they can vary widely, but also because it is the faculty, through their design and implementation of online courses, that will shape the…

  8. Virtual Bioinformatics Distance Learning Suite

    ERIC Educational Resources Information Center

    Tolvanen, Martti; Vihinen, Mauno

    2004-01-01

    Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material…

  9. Distance Education for Continuing Education.

    ERIC Educational Resources Information Center

    Sharma, Motilal

    The role of distance education as a vehicle for delivering continuing education in Asia was examined from the following standpoints: facilitating development amidst poverty; making human resource development the prime strategy; overcoming the stagnation of education amidst wrenching change; and using distance education to accomplish those…

  10. Distance Education. [SITE 2001 Section].

    ERIC Educational Resources Information Center

    Fuller, Frank, Ed.; McBride, Ron, Ed.

    This document contains the papers on distance education from the SITE (Society for Information Technology & Teacher Education) 2001 conference. Topics covered include: the distance education degree program for the Master of Mathematics with a teaching option at Texas A&M University; the evolution of online learning; Internet-based distance…

  11. Hierarchical traits distances explain grassland Fabaceae species' ecological niches distances

    PubMed Central

    Fort, Florian; Jouany, Claire; Cruz, Pablo

    2015-01-01

    Fabaceae species play a key role in ecosystem functioning through their capacity to fix atmospheric nitrogen via their symbiosis with Rhizobium bacteria. To increase benefits of using Fabaceae in agricultural systems, it is necessary to find ways to evaluate species or genotypes having potential adaptations to sub-optimal growth conditions. We evaluated the relevance of phylogenetic distance, absolute trait distance and hierarchical trait distance for comparing the adaptation of 13 grassland Fabaceae species to different habitats, i.e., ecological niches. We measured a wide range of functional traits (root traits, leaf traits, and whole plant traits) in these species. Species phylogenetic and ecological distances were assessed from a species-level phylogenetic tree and species' ecological indicator values, respectively. We demonstrated that differences in ecological niches between grassland Fabaceae species were related more to their hierarchical trait distances than to their phylogenetic distances. We showed that grassland Fabaceae functional traits tend to converge among species with the same ecological requirements. Species with acquisitive root strategies (thin roots, shallow root systems) are competitive species adapted to non-stressful meadows, while conservative ones (coarse roots, deep root systems) are able to tolerate stressful continental climates. In contrast, acquisitive species appeared to be able to tolerate low soil-P availability, while conservative ones need high P availability. Finally we highlight that traits converge along the ecological gradient, providing the assumption that species with similar root-trait values are better able to coexist, regardless of their phylogenetic distance. PMID:25741353

  12. Reducing the distance in distance-caregiving by technology innovation

    PubMed Central

    Benefield, Lazelle E; Beck, Cornelia

    2007-01-01

    Family caregivers are responsible for the home care of over 34 million older adults in the United States. For many, the elder family member lives more than an hour’s distance away. Distance caregiving is a growing alternative to more familiar models where: 1) the elder and the family caregiver(s) may reside in the same household; or 2) the family caregiver may live nearby but not in the same household as the elder. The distance caregiving model involves elders and their family caregivers who live at some distance, defined as more than a 60-minute commute, from one another. Evidence suggests that distance caregiving is a distinct phenomenon, differs substantially from on-site family caregiving, and requires additional assistance to support the physical, social, and contextual dimensions of the caregiving process. Technology-based assists could virtually connect the caregiver and elder and provide strong support that addresses the elder’s physical, social, cognitive, and/or sensory impairments. Therefore, in today’s era of high technology, it is surprising that so few affordable innovations are being marketed for distance caregiving. This article addresses distance caregiving, proposes the use of technology innovation to support caregiving, and suggests a research agenda to better inform policy decisions related to the unique needs of this situation. PMID:18044143

  13. Multipath star switch controller

    NASA Technical Reports Server (NTRS)

    Anderson, T. O.

    1980-01-01

    Device concept permits parallel computers to scan several commonnetwork-connected data stations at maximum rate. Sequencers leap-frog to bypass ports already being serviced by another computer. Two-path system for 16-port star switch controller is cost effective if added bandwidth or increased reliability is desired. Triple-path system would be cost effective for 32-port controller.

  14. The art of descrying distance.

    PubMed

    Niall, K K

    1999-09-01

    How naive can one experiment be? Imagine asking observers to judge distance -- yes, literally asking them. And in asking them, no visual evoked potentials were measured, and changes in blood flow to the occipital cortex were ignored. But serendipity occurs even to the well-prepared: One's best thought for a new experiment can prove to be one's first unbiased, uncomplicated thought.Here's a cursory review of the events: A number of observers were asked to judge distances between marked posts in a field at night. They made their judgments with the help of night vision goggles (NVG). At first the observers underestimated the distances on average. Then an experimenter began to correct the observers after each judgment. The observers' judgments of distance became accurate. On average, the observers began to estimate those distances accurately. Is this and incredible story or a difficult one?

  15. The 30/20 GHz fixed communications systems service demand assessment. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    Gamble, R. B.; Seltzer, H. R.; Speter, K. M.; Westheimer, M.

    1979-01-01

    Demand for telecommunications services is forecasted for the period 1980-2000, with particular reference to that portion of the demand associated with satellite communications. Overall demand for telecommunications is predicted to increase by a factor of five over the period studied and the satellite portion of demand will increase even more rapidly. Traffic demand is separately estimated for voice, video, and data services and is also described as a function of distance traveled and city size. The satellite component of projected demand is compared with the capacity available in the C and Ku satellite bands and it is projected that new satellite technology and the implementation of Ka band transmission will be needed in the decade of the 1990's.

  16. Font size and viewing distance of handheld smart phones.

    PubMed

    Bababekova, Yuliya; Rosenfield, Mark; Hue, Jennifer E; Huang, Rae R

    2011-07-01

    The use of handheld smart phones for written communication is becoming ubiquitous in modern society. The relatively small screens found in these devices may necessitate close working distances and small text sizes, which can increase the demands placed on accommodation and vergence. Font size and viewing distance were measured while subjects used handheld electronic devices in two separate trials. In the first study (n=129), subjects were asked to show a typical text message on their own personal phone and to hold the device "as if they were about to read a text message." A second trial was conducted in a similar manner except subjects (n=100) were asked to view a specific web page from the internet. For text messages and internet viewing, the mean font size was 1.1 M (range, 0.7 to 2.1 M) and 0.8 M (range, 0.3 to 1.4 M), respectively. The mean working distance for text messages and internet viewing was 36.2 cm (range, 17.5 to 58.0 cm) and 32.2 cm (range, 19 to 60 cm), respectively. The mean font size for both conditions was comparable with newspaper print, although some subjects viewed text that was considerably smaller. However, the mean working distances were closer than the typical near working distance of 40 cm for adults when viewing hardcopy text. These close distances place increased demands on both accommodation and vergence, which could exacerbate symptoms. Practitioners need to consider the closer distances adopted while viewing material on smart phones when examining patients and prescribing refractive corrections for use at near, as well as when treating patients presenting with asthenopia associated with nearwork. Copyright © 2011 American Academy of Optometry

  17. Advertising media and cigarette demand.

    PubMed

    Goel, Rajeev K

    2011-01-01

    Using state-level panel data for the USA spanning three decades, this research estimates the demand for cigarettes. The main contribution lies in studying the effects of cigarette advertising disaggregated across five qualitatively different groups. Results show cigarette demand to be near unit elastic, the income effects to be generally insignificant and border price effects and habit effects to be significant. Regarding advertising effects, aggregate cigarette advertising has a negative effect on smoking. Important differences across advertising media emerge when cigarette advertising is disaggregated. The effects of public entertainment and Internet cigarette advertising are stronger than those of other media. Anti-smoking messages accompanying print cigarette advertising seem relatively more effective. Implications for smoking control policy are discussed.

  18. Advertising increases demand for vasectomy.

    PubMed

    Mehta, M; Mckenzie, M

    1996-01-01

    The recent evaluation of a 2-year no-scalpel vasectomy (NSV) training program providing on-site, hands-on training for physicians working in 43 publicly funded health centers in 17 states found that demand for vasectomy in low-income and minority communities in the US increased following the implementation of innovative advertising strategies. The program also provided sites with surgical instruments, training materials, a press kit, and some help with public information activities. Participating clinics used a range of formal and informal advertising strategies, including radio and printed advertisements, to inform potential clients about vasectomy services. Many interested clients presented to clinics to undergo vasectomy once they had been made aware of the service and its availability. Several providers even stated that advertising caused the demand for vasectomy to exceed their capacity to provide services. The provision of low- or no-cost procedures helped to attract new clients.

  19. Occupational Demand in Minnesota for 1973.

    ERIC Educational Resources Information Center

    Copa, George H.; Irvin, Donald E., Jr.

    Effective planning of vocational education programs requires information about both the educational demand of individuals and the manpower demands of business and industry. Two characteristics of the manpower demand in Minnesota which are defined and estimated in this report are occupational demand, the total number of employment positions in a…

  20. 12 CFR 561.16 - Demand accounts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Demand accounts. 561.16 Section 561.16 Banks... AFFECTING ALL SAVINGS ASSOCIATIONS § 561.16 Demand accounts. The term demand accounts means non-interest-bearing demand deposits that are subject to check or to withdrawal or transfer on negotiable or...