Outsourcing to increase service capacity in a New Zealand hospital.

PubMed

Renner, C; Palmer, E

1999-01-01

Service firms manage variability using both demand-side tactics (levelling customer demand), and supply-side tactics (increasing available capacity). One popular way of increasing available capacity is the outsourcing of non-core services. This article uses a case study to examine the impact of an outsourced non-core service on a hospital's overall service system. Findings show that the outsourced service provides access to more sophisticated technology, increases in-house capacity and saves capital expenditure. However, the outsourcing also increases the scheduling problems that the hospital faces. These problems are largely due to communication delays from the involvement of more than one organisation. These delays decrease the response time available to match changes in demand for the outsourced service. Given the obvious benefits of such outsourcing, the article concludes that management should pay close attention to the communication pathways between organisations, in order to minimise the end effects identified in this study.

Research on electricity market operation mechanism and its benefit of demand side participation

NASA Astrophysics Data System (ADS)

Han, Shuai; Yan, Xu; Qin, Li-juan; Lin, Xi-qiao; Zeng, Bo

2017-08-01

Demand response plays an important role in maintaining the economic stability of the system, and has the characteristics of high efficiency, low cost, fast response, good environmental benefits and so on. Demand side resource is an important part of electricity market. The research of demand side resources in our country is still in the initial stage, but the opening of the electricity sales side provides a broad prospect for the development of electricity market. This paper summarizes the main types of demand side resources in our country, analyzes the economic principle of demand response from the micro perspective, puts forward some suggestions on the operation mechanism of China’s demand side resources participating in the electricity market under the condition of electricity sales side opening, analyzes the current situation of pricing in the electricity wholesale market and sets up the pricing strategy of the centralized wholesale market with the demand side power supply participating in quotation, which makes the social and economic benefits reach the maximum.

The Future of Low-Carbon Electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel

Here, we review future global demand for electricity and major technologies positioned to supply itwith minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal and biomass), nuclear fission, and fossil power with CO 2 capture and sequestration. Two breakthrough technologies (space solar power and nuclear fusion) are discussed as exciting but uncertain additional options for low net GHG emissions (“low-carbon”) electricity generation. Grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes) are also discussed. For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs and other issues as appropriate. While no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

The Future of Low-Carbon Electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel

We review future global demand for electricity and major technologies positioned to supply it with minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal, and biomass), nuclear fission, and fossil power with CO2 capture and sequestration. We discuss two breakthrough technologies (space solar power and nuclear fusion) as exciting but uncertain additional options for low-net GHG emissions (i.e., low-carbon) electricity generation. In addition, we discuss grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes). For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs, and other issues as appropriate. Although no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

The Future of Low-Carbon Electricity

DOE PAGES

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel; ...

2017-07-10

Here, we review future global demand for electricity and major technologies positioned to supply itwith minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal and biomass), nuclear fission, and fossil power with CO 2 capture and sequestration. Two breakthrough technologies (space solar power and nuclear fusion) are discussed as exciting but uncertain additional options for low net GHG emissions (“low-carbon”) electricity generation. Grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes) are also discussed. For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs and other issues as appropriate. While no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

Design of demand side response model in energy internet demonstration park

NASA Astrophysics Data System (ADS)

Zhang, Q.; Liu, D. N.

2017-08-01

The implementation of demand side response can bring a lot of benefits to the power system, users and society, but there are still many problems in the actual operation. Firstly, this paper analyses the current situation and problems of demand side response. On this basis, this paper analyses the advantages of implementing demand side response in the energy Internet demonstration park. Finally, the paper designs three kinds of feasible demand side response modes in the energy Internet demonstration park.

A fuel cycle assessment guide for utility and state energy planners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-07-01

This guide, one in a series of documents designed to help assess fuel cycles, is a framework for setting parameters, collecting data, and analyzing fuel cycles for supply-side and demand-side management. It provides an automated tool for entering comparative fuel cycle data that are meaningful to state and utility integrated resource planning, collaborative, and regional energy planning activities. It outlines an extensive range of energy technology characteristics and environmental, social, and economic considerations within each stage of a fuel cycle. The guide permits users to focus on specific stages or effects that are relevant to the technology being evaluated andmore » that meet the user`s planning requirements.« less

Intermittent Renewable Management Pilot Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiliccote, Sila; Homan, Gregory; Anderson, Robert

The Intermittent Renewable Management Pilot - Phase 2 (IRM2) was designed to study the feasibility of demand-side resources to participate into the California Independent System Operator (CAISO) wholesale market as proxy demand resources (PDR). The pilot study focused on understanding the issues related with direct participation of third-parties and customers including customer acceptance; market transformation challenges (wholesale market, technology); technical and operational feasibility; and value to the rate payers, DR resource owners and the utility on providing an enabling mechanism for DR resources into the wholesale markets. The customer had the option of committing to either three contiguous hour blocksmore » for 24 days or six contiguous hours for 12 days a month with day-ahead notification that aligned with the CAISO integrated forward market. As a result of their being available, the customer was paid $10/ kilowatt (kW)-month for capacity in addition to CAISO energy settlements. The participants were limited to no more than a 2 megawatt (MW) capacity with a six-month commitment. Four participants successfully engaged in the pilot. In this report, we provide the description of the pilot, participant performance results, costs and value to participants as well as outline some of the issues encountered through the pilot. Results show that participants chose to participate with storage and the value of CAISO settlements were significantly lower than the capacity payments provided by the utility as incentive payments. In addition, this pilot revealed issues both on the participant side and system operations side. These issues are summarized in the report.The Intermittent Renewable Management Pilot - Phase 2 (IRM2) was designed to study the feasibility of demand-side resources to participate into the California Independent System Operator (CAISO) wholesale market as proxy demand resources (PDR). The pilot study focused on understanding the issues related with direct participation of third-parties and customers including customer acceptance; market transformation challenges (wholesale market, technology); technical and operational feasibility; and value to the rate payers, DR resource owners and the utility on providing an enabling mechanism for DR resources into the wholesale markets.« less

ASPEN--A Web-Based Application for Managing Student Server Accounts

ERIC Educational Resources Information Center

Sandvig, J. Christopher

2004-01-01

The growth of the Internet has greatly increased the demand for server-side programming courses at colleges and universities. Students enrolled in such courses must be provided with server-based accounts that support the technologies that they are learning. The process of creating, managing and removing large numbers of student server accounts is…

Development of robust building energy demand-side control strategy under uncertainty

NASA Astrophysics Data System (ADS)

Kim, Sean Hay

The potential of carbon emission regulations applied to an individual building will encourage building owners to purchase utility-provided green power or to employ onsite renewable energy generation. As both cases are based on intermittent renewable energy sources, demand side control is a fundamental precondition for maximizing the effectiveness of using renewable energy sources. Such control leads to a reduction in peak demand and/or in energy demand variability, therefore, such reduction in the demand profile eventually enhances the efficiency of an erratic supply of renewable energy. The combined operation of active thermal energy storage and passive building thermal mass has shown substantial improvement in demand-side control performance when compared to current state-of-the-art demand-side control measures. Specifically, "model-based" optimal control for this operation has the potential to significantly increase performance and bring economic advantages. However, due to the uncertainty in certain operating conditions in the field its control effectiveness could be diminished and/or seriously damaged, which results in poor performance. This dissertation pursues improvements of current demand-side controls under uncertainty by proposing a robust supervisory demand-side control strategy that is designed to be immune from uncertainty and perform consistently under uncertain conditions. Uniqueness and superiority of the proposed robust demand-side controls are found as below: a. It is developed based on fundamental studies about uncertainty and a systematic approach to uncertainty analysis. b. It reduces variability of performance under varied conditions, and thus avoids the worst case scenario. c. It is reactive in cases of critical "discrepancies" observed caused by the unpredictable uncertainty that typically scenario uncertainty imposes, and thus it increases control efficiency. This is obtainable by means of i) multi-source composition of weather forecasts including both historical archive and online sources and ii) adaptive Multiple model-based controls (MMC) to mitigate detrimental impacts of varying scenario uncertainties. The proposed robust demand-side control strategy verifies its outstanding demand-side control performance in varied and non-indigenous conditions compared to the existing control strategies including deterministic optimal controls. This result reemphasizes importance of the demand-side control for a building in the global carbon economy. It also demonstrates a capability of risk management of the proposed robust demand-side controls in highly uncertain situations, which eventually attains the maximum benefit in both theoretical and practical perspectives.

Assessment of utility side financial benefits of demand side management considering environmental impacts

NASA Astrophysics Data System (ADS)

Abeygunawardane, Saranga Kumudu

2018-02-01

Any electrical utility prefers to implement demand side management and change the shape of the demand curve in a beneficial manner. This paper aims to assess the financial gains (or losses) to the generating sector through the implementation of demand side management programs. An optimization algorithm is developed to find the optimal generation mix that minimizes the daily total generating cost. This daily total generating cost includes the daily generating cost as well as the environmental damage cost. The proposed optimization algorithm is used to find the daily total generating cost for the base case and for several demand side management programs using the data obtained from the Sri Lankan power system. Results obtained for DSM programs are compared with the results obtained for the base case to assess the financial benefits of demand side management to the generating sector.

Realizing the electric-vehicle revolution

NASA Astrophysics Data System (ADS)

Tran, Martino; Banister, David; Bishop, Justin D. K.; McCulloch, Malcolm D.

2012-05-01

Full battery electric vehicles (BEVs) have become an important policy option to mitigate climate change, but there are major uncertainties in the scale and timing of market diffusion. Although there has been substantial work showing the potential energy and climate benefits of BEVs, demand-side factors, such as consumer behaviour, are less recognized in the debate. We show the importance of assessing BEV diffusion from an integrated perspective, focusing on key interactions between technology and behaviour across different scales, including power-system demand, charging infrastructure, vehicle performance, driving patterns and individual adoption behaviour.

Modeling Framework and Validation of a Smart Grid and Demand Response System for Wind Power Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broeer, Torsten; Fuller, Jason C.; Tuffner, Francis K.

2014-01-31

Electricity generation from wind power and other renewable energy sources is increasing, and their variability introduces new challenges to the power system. The emergence of smart grid technologies in recent years has seen a paradigm shift in redefining the electrical system of the future, in which controlled response of the demand side is used to balance fluctuations and intermittencies from the generation side. This paper presents a modeling framework for an integrated electricity system where loads become an additional resource. The agent-based model represents a smart grid power system integrating generators, transmission, distribution, loads and market. The model incorporates generatormore » and load controllers, allowing suppliers and demanders to bid into a Real-Time Pricing (RTP) electricity market. The modeling framework is applied to represent a physical demonstration project conducted on the Olympic Peninsula, Washington, USA, and validation simulations are performed using actual dynamic data. Wind power is then introduced into the power generation mix illustrating the potential of demand response to mitigate the impact of wind power variability, primarily through thermostatically controlled loads. The results also indicate that effective implementation of Demand Response (DR) to assist integration of variable renewable energy resources requires a diversity of loads to ensure functionality of the overall system.« less

Promoting healthcare innovation on the demand side

PubMed Central

Eisenberg, Rebecca S.

2017-01-01

Abstract Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms—and on similar incentives—to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare—what we call ‘demand-side innovation’. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the effects of current legal rules on demand-side innovation, including insurance regulation, intellectual property rules, privacy protections, and FDA regulation of new healthcare technologies. Throughout, we highlight many policy tools that government can use and is using to facilitate payer innovation outside the traditional toolkit of patents and exclusive rights. PMID:28852556

Promoting healthcare innovation on the demand side.

PubMed

Eisenberg, Rebecca S; Price, W Nicholson

2017-04-01

Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms-and on similar incentives-to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare-what we call 'demand-side innovation'. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the effects of current legal rules on demand-side innovation, including insurance regulation, intellectual property rules, privacy protections, and FDA regulation of new healthcare technologies. Throughout, we highlight many policy tools that government can use and is using to facilitate payer innovation outside the traditional toolkit of patents and exclusive rights.

Long-term change in the organization of inventive activity

PubMed Central

Lamoreaux, Naomi R.; Sokoloff, Kenneth L.

1996-01-01

Relying on a quantitative analysis of the patenting and assignment behavior of inventors, we highlight the evolution of institutions that encouraged trade in technology and a growing division of labor between those who invented new technologies and those who exploited them commercially over the nineteenth and early-twentieth centuries. At the heart of this change in the organization of inventive activity was a set of familiar developments which had significant consequences for the supply and demand of inventions. On the supply side, the growing complexity and capital intensity of technology raised the amount of human and physical capital required for effective invention, making it increasingly desirable for individuals involved in this activity to specialize. On the demand side, the growing competitiveness of product markets induced firms to purchase or otherwise obtain the rights to technologies developed by others. These increasing incentives to differentiate the task of invention from that of commercializing new technologies depended for their realization upon the development of markets and other types of organizational supports for trade in technology. The evidence suggests that the necessary institutions evolved first in those regions of the country where early patenting activity had already been concentrated. A self-reinforcing process whereby high rates of inventive activity encouraged the evolution of a market for technology, which in turn encouraged greater specialization and productivity at invention as individuals found it increasingly feasible to sell and license their discoveries, appears to have been operating. This market trade in technological information was an important contributor to the achievement of a high level of specialization at invention well before the rise of large-scale research laboratories in the twentieth century. PMID:8917480

The morality of human gene patents.

PubMed

Resnik, David B

1997-03-01

This paper discusses the morality of patenting human genes and genetic technologies. After examining arguments on different sides of the issue, the paper concludes that there are, at present, no compelling reasons to prohibit the extension of current patent laws to the realm of human genetics. However, since advances in genetics are likely to have profound social implications, the most prudent course of action demands a continual reexamination of genetics laws and policies in light of ongoing developments in science and technology.

Integrating medical, assistive, and universally designed products and technologies: assistive technology device classification (ATDC).

PubMed

Bauer, Stephen; Elsaesser, Linda-Jeanne

2012-09-01

ISO26000:2010 International Guidance Standard on Organizational Social Responsibility requires that effective organizational performance recognize social responsibility, including the rights of persons with disabilities (PWD), engage stakeholders and contribute to sustainable development. Millennium Development Goals 2010 notes that the most vulnerable people require special attention, while the World Report on Disability 2011 identifies improved data collection and removal of barriers to rehabilitation as the means to empower PWD. The Assistive Technology Device Classification (ATDC), Assistive Technology Service Method (ATSM) and Matching Person and Technology models provide an evidence-based, standardized, internationally comparable framework to improve data collection and rehabilitation interventions. The ATDC and ATSM encompass and support universal design (UD) principles, and use the language and concepts of the International Classification of Functioning, Disability and Health (ICF). Use ATDC and ICF concepts to differentiate medical, assistive and UD products and technology; relate technology "types" to markets and costs; and support provision of UD products and technologies as sustainable and socially responsible behavior. Supply-side and demand-side incentives are suggested to foster private sector development and commercialization of UD products and technologies. Health and health-related professionals should be knowledgeable of UD principles and interventions.

A low energy demand scenario for meeting the 1.5 °C target and sustainable development goals without negative emission technologies

NASA Astrophysics Data System (ADS)

Grubler, Arnulf; Wilson, Charlie; Bento, Nuno; Boza-Kiss, Benigna; Krey, Volker; McCollum, David L.; Rao, Narasimha D.; Riahi, Keywan; Rogelj, Joeri; De Stercke, Simon; Cullen, Jonathan; Frank, Stefan; Fricko, Oliver; Guo, Fei; Gidden, Matt; Havlík, Petr; Huppmann, Daniel; Kiesewetter, Gregor; Rafaj, Peter; Schoepp, Wolfgang; Valin, Hugo

2018-06-01

Scenarios that limit global warming to 1.5 °C describe major transformations in energy supply and ever-rising energy demand. Here, we provide a contrasting perspective by developing a narrative of future change based on observable trends that results in low energy demand. We describe and quantify changes in activity levels and energy intensity in the global North and global South for all major energy services. We project that global final energy demand by 2050 reduces to 245 EJ, around 40% lower than today, despite rises in population, income and activity. Using an integrated assessment modelling framework, we show how changes in the quantity and type of energy services drive structural change in intermediate and upstream supply sectors (energy and land use). Down-sizing the global energy system dramatically improves the feasibility of a low-carbon supply-side transformation. Our scenario meets the 1.5 °C climate target as well as many sustainable development goals, without relying on negative emission technologies.

Negative emissions—Part 3: Innovation and upscaling

NASA Astrophysics Data System (ADS)

Nemet, Gregory F.; Callaghan, Max W.; Creutzig, Felix; Fuss, Sabine; Hartmann, Jens; Hilaire, Jérôme; Lamb, William F.; Minx, Jan C.; Rogers, Sophia; Smith, Pete

2018-06-01

We assess the literature on innovation and upscaling for negative emissions technologies (NETs) using a systematic and reproducible literature coding procedure. To structure our review, we employ the framework of sequential stages in the innovation process, with which we code each NETs article in innovation space. We find that while there is a growing body of innovation literature on NETs, 59% of the articles are focused on the earliest stages of the innovation process, ‘research and development’ (R&D). The subsequent stages of innovation are also represented in the literature, but at much lower levels of activity than R&D. Distinguishing between innovation stages that are related to the supply of the technology (R&D, demonstrations, scale up) and demand for the technology (demand pull, niche markets, public acceptance), we find an overwhelming emphasis (83%) on the supply side. BECCS articles have an above average share of demand-side articles while direct air carbon capture and storage has a very low share. Innovation in NETs has much to learn from successfully diffused technologies; appealing to heterogeneous users, managing policy risk, as well as understanding and addressing public concerns are all crucial yet not well represented in the extant literature. Results from integrated assessment models show that while NETs play a key role in the second half of the 21st century for 1.5 °C and 2 °C scenarios, the major period of new NETs deployment is between 2030 and 2050. Given that the broader innovation literature consistently finds long time periods involved in scaling up and deploying novel technologies, there is an urgency to developing NETs that is largely unappreciated. This challenge is exacerbated by the thousands to millions of actors that potentially need to adopt these technologies for them to achieve planetary scale. This urgency is reflected neither in the Paris Agreement nor in most of the literature we review here. If NETs are to be deployed at the levels required to meet 1.5 °C and 2 °C targets, then important post-R&D issues will need to be addressed in the literature, including incentives for early deployment, niche markets, scale-up, demand, and—particularly if deployment is to be hastened—public acceptance.

Water demand for electricity in deep decarbonisation scenarios: a multi-model assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mouratiadou, I.; Bevione, M.; Bijl, D. L.

This study assesses the effects of deep electricity decarbonisation and shifts in the choice of power plant cooling technologies on global electricity water demand, using a suite of five integrated assessment models. We find that electricity sector decarbonisation results in co-benefits for water resources primarily due to the phase-out of water-intensive coal-based thermoelectric power generation, although these co-benefits vary substantially across decarbonisation scenarios. Wind and solar photovoltaic power represent a win-win option for both climate and water resources, but further expansion of nuclear or fossil- and biomass-fuelled power plants with carbon capture and storage may result in increased pressures onmore » the water environment. Further to these results, the paper provides insights on the most crucial factors of uncertainty with regards to future estimates of water demand. These estimates varied substantially across models in scenarios where the effects of decarbonisation on the electricity mix were less clear-cut. Future thermal and water efficiency improvements of power generation technologies and demand-side energy efficiency improvements were also identified to be important factors of uncertainty. We conclude that in order to ensure positive effects of decarbonisation on water resources, climate policy should be combined with technology-specific energy and/or water policies.« less

How to introduce demand side resources in the design of low-carbon power systems in China

NASA Astrophysics Data System (ADS)

Zhou, Pengcheng; Liu, Yiqun; Zeng, Ming; Sun, Chenjun

2018-04-01

Nowadays, China's energy demand sustained rapid growth, and the coal-based energy structure has adverse effects on the environment. The flexibility of demand side resource (DSR) will be greatly improved, and DSR can reduce electricity consumption actively and temporarily, and realize energy saving and emission reduction. But there are still some problems to introduce DSR in China. This paper proposes three practices for introducing demand side resources to improve the flexibility of power systems through demand resources.

Force transformation: an historical perspective from across the Atlantic

NASA Astrophysics Data System (ADS)

Salt, John D.

2004-07-01

The twentieth century saw the armies of the US and the UK successfully meet a number of extreme demands imposed by changes in weapons technology and by politico-military events. In many cases, on both sides of the Atlantic, this has demanded a greater or lesser transformation of military organisation and practice. The present paper attempts a broad conspectus of the reactions of both armies to the most significant of these technological challenges, such as the magazine rifle, war gases, the tank, indirect-fire artillery, radio control, the atomic bomb, the guided missile and the digital computer. It seems that the US Army has been much more prepared than the British to re-organise itself to meet technological change. The British Army not only seems to have transformed itself less often, but also as a response to pressures other than those of technology. The author concludes that there are certain principles that have held good throughout a century of sometimes dizzying technological change, and which will be worth holding on to. The force transformation we see may not be entirely the one we expect.

Joint Planning Of Energy Storage and Transmission Considering Wind-Storage Combined System and Demand Side Response

NASA Astrophysics Data System (ADS)

Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.

2017-12-01

In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.

Distributed Energy Systems Integration and Demand Optimization for Autonomous Operations and Electric Grid Transactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghatikar, Girish; Mashayekh, Salman; Stadler, Michael

Distributed power systems in the U.S. and globally are evolving to provide reliable and clean energy to consumers. In California, existing regulations require significant increases in renewable generation, as well as identification of customer-side distributed energy resources (DER) controls, communication technologies, and standards for interconnection with the electric grid systems. As DER deployment expands, customer-side DER control and optimization will be critical for system flexibility and demand response (DR) participation, which improves the economic viability of DER systems. Current DER systems integration and communication challenges include leveraging the existing DER and DR technology and systems infrastructure, and enabling optimized cost,more » energy and carbon choices for customers to deploy interoperable grid transactions and renewable energy systems at scale. Our paper presents a cost-effective solution to these challenges by exploring communication technologies and information models for DER system integration and interoperability. This system uses open standards and optimization models for resource planning based on dynamic-pricing notifications and autonomous operations within various domains of the smart grid energy system. It identifies architectures and customer engagement strategies in dynamic DR pricing transactions to generate feedback information models for load flexibility, load profiles, and participation schedules. The models are tested at a real site in California—Fort Hunter Liggett (FHL). Furthermore, our results for FHL show that the model fits within the existing and new DR business models and networked systems for transactive energy concepts. Integrated energy systems, communication networks, and modeling tools that coordinate supply-side networks and DER will enable electric grid system operators to use DER for grid transactions in an integrated system.« less

Income and Technology as Drivers of Australian Healthcare Expenditures.

PubMed

You, Xiaohui; Okunade, Albert A

2017-07-01

The roles of income and technology as the major determinants of aggregate healthcare expenditure (HEXP) continue to interest economists and health policy researchers. Concepts and measures of medical technologies remain complex; however, income (on the demand side) and technology (on the supply side) are important drivers of HEXP. This paper presents analysis of Australia's HEXP, using time-series econometrics modeling techniques applied to 1971-2011 annual aggregate data. Our work fills two important gaps in the literature. First, we model the determinants of Australia's HEXP using the latest and longest available data series. Second, this novel study investigates several alternative technology proxies (input and output measures), including economy-wide research and development expenditures, hospital research expenditures, mortality rate, and two technology indexes based on medical devices. We then apply the residual component method and the technology proxy approach to quantify the technology effects on HEXP. Our empirical results suggest that Australian aggregate healthcare is a normal good and a technical necessity with the income elasticity estimates ranging from 0.51 to 0.97, depending on the model. The estimated technology effects on HEXP falling in the 0.30-0.35 range and mimicking those in the literature using the US data, reinforce the global spread of healthcare technology. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

The Bright Elusive Butterfly of Value in Health Technology Development

PubMed Central

Greenhalgh, Trisha; Fahy, Nick; Shaw, Sara

2018-01-01

The current system of health technology development is characterised by multiple misalignments. The "supply" side (innovation policy-makers, entrepreneurs, investors) and the "demand" side (health policy-makers, regulators, health technology assessment, purchasers) operate under different – and conflicting – logics. The system is less a "pathway" than an unstable ecosystem of multiple interacting sub-systems. "Value" means different things to each of the numerous actors involved. Supply-side dynamics are built on fictions; regulatory checks and balances are designed to assure quality, safety and efficacy, not to ensure that technologies entering the market are either desirable or cost-effective. Assessment of comparative and cost-effectiveness usually comes too late in the process to shape an innovation’s development. We offer no simple solutions to these problems, but in the spirit of commencing a much-needed public debate, we suggest some tentative ways forward. First, universities and public research funders should play a more proactive role in shaping the system. Second, the role of industry in forging long-term strategic partnerships for public benefit should be acknowledged (though not uncritically). Third, models of "responsible innovation" and public input to research priority-setting should be explored. Finally, the evidence base on how best to govern inter-sectoral health research partnerships should be developed and applied. PMID:29325407

Exploring Tradeoffs in Demand-side and Supply-side Management of Urban Water Resources using Agent-based Modeling and Evolutionary Computation

NASA Astrophysics Data System (ADS)

Kanta, L.; Berglund, E. Z.

2015-12-01

Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS) framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger (1) increases in the volume of water pumped through inter-basin transfers from an external reservoir and (2) drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

Distributed utility technology cost, performance, and environmental characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wan, Y; Adelman, S

1995-06-01

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking informationmore » on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.« less

Case-study of a user-driven prosthetic arm design: bionic hand versus customized body-powered technology in a highly demanding work environment.

PubMed

Schweitzer, Wolf; Thali, Michael J; Egger, David

2018-01-03

Prosthetic arm research predominantly focuses on "bionic" but not body-powered arms. However, any research orientation along user needs requires sufficiently precise workplace specifications and sufficiently hard testing. Forensic medicine is a demanding environment, also physically, also for non-disabled people, on several dimensions (e.g., distances, weights, size, temperature, time). As unilateral below elbow amputee user, the first author is in a unique position to provide direct comparison of a "bionic" myoelectric iLimb Revolution (Touch Bionics) and a customized body-powered arm which contains a number of new developments initiated or developed by the user: (1) quick lock steel wrist unit; (2) cable mount modification; (3) cast shape modeled shoulder anchor; (4) suspension with a soft double layer liner (Ohio Willowwood) and tube gauze (Molnlycke) combination. The iLimb is mounted on an epoxy socket; a lanyard fixed liner (Ohio Willowwood) contains magnetic electrodes (Liberating Technologies). An on the job usage of five years was supplemented with dedicated and focused intensive two-week use tests at work for both systems. The side-by-side comparison showed that the customized body-powered arm provides reliable, comfortable, effective, powerful as well as subtle service with minimal maintenance; most notably, grip reliability, grip force regulation, grip performance, center of balance, component wear down, sweat/temperature independence and skin state are good whereas the iLimb system exhibited a number of relevant serious constraints. Research and development of functional prostheses may want to focus on body-powered technology as it already performs on manually demanding and heavy jobs whereas eliminating myoelectric technology's constraints seems out of reach. Relevant testing could be developed to help expediting this. This is relevant as Swiss disability insurance specifically supports prostheses that enable actual work integration. Myoelectric and cosmetic arm improvement may benefit from a less forgiving focus on perfecting anthropomorphic appearance.

Smart Buildings and Demand Response

NASA Astrophysics Data System (ADS)

Kiliccote, Sila; Piette, Mary Ann; Ghatikar, Girish

2011-11-01

Advances in communications and control technology, the strengthening of the Internet, and the growing appreciation of the urgency to reduce demand side energy use are motivating the development of improvements in both energy efficiency and demand response (DR) systems in buildings. This paper provides a framework linking continuous energy management and continuous communications for automated demand response (Auto-DR) in various times scales. We provide a set of concepts for monitoring and controls linked to standards and procedures such as Open Automation Demand Response Communication Standards (OpenADR). Basic building energy science and control issues in this approach begin with key building components, systems, end-uses and whole building energy performance metrics. The paper presents a framework about when energy is used, levels of services by energy using systems, granularity of control, and speed of telemetry. DR, when defined as a discrete event, requires a different set of building service levels than daily operations. We provide examples of lessons from DR case studies and links to energy efficiency.

Co-optimization of Energy and Demand-Side Reserves in Day-Ahead Electricity Markets

NASA Astrophysics Data System (ADS)

Surender Reddy, S.; Abhyankar, A. R.; Bijwe, P. R.

2015-04-01

This paper presents a new multi-objective day-ahead market clearing (DAMC) mechanism with demand-side reserves/demand response (DR) offers, considering realistic voltage-dependent load modeling. The paper proposes objectives such as social welfare maximization (SWM) including demand-side reserves, and load served error (LSE) minimization. In this paper, energy and demand-side reserves are cleared simultaneously through co-optimization process. The paper clearly brings out the unsuitability of conventional SWM for DAMC in the presence of voltage-dependent loads, due to reduction of load served (LS). Under such circumstances multi-objective DAMC with DR offers is essential. Multi-objective Strength Pareto Evolutionary Algorithm 2+ (SPEA 2+) has been used to solve the optimization problem. The effectiveness of the proposed scheme is confirmed with results obtained from IEEE 30 bus system.

Physiological and skill demands of 'on-side' and 'off-side' games.

PubMed

Gabbett, Tim J; Jenkins, David G; Abernethy, Bruce

2010-11-01

This study investigated the physiological and skill demands of 'on-side' and 'off-side' games in elite rugby league players. Sixteen male rugby league players participated in 'on-side' and 'off-side' games. Both small-sided games were played in a 40- × 40-m playing area. The 'off-side' game permitted players to have 3 'plays' while in possession of the ball. Players were permitted to pass backward or forward (to an 'off-side' player). The 'on-side' game also permitted players to have 3 'plays' while in possession of the ball. However, players were only permitted to pass backward to players in an 'on-side' position. Heart rate and movement patterns (via global positioning system) were recorded continuously throughout both games. Data were collected on the distance covered, number of high-acceleration and velocity efforts, and recovery between efforts. Video footage was also taken to track the performance of the players. Post hoc inspection of the footage was undertaken to count the number of possessions and the number and quality of disposals. In comparison to 'on-side' games, 'off-side' games had a greater number of involvements ("touches"), passes, and effective passes. However, the cognitive demands of 'on-side' games were greater than 'off-side' games. 'Off-side' games resulted in a greater total distance covered, greater distance covered in mild and moderate accelerations, and greater distance covered in low, moderate, and high-velocity efforts. There were also a greater number of short duration recovery periods between efforts in 'off-side' games. The results of this study demonstrate that 'off-side' games provide greater physiological and skill demands than 'on-side' games. 'Off-side' games may provide a practical alternative to 'on-side' games for the development of skill and fitness in elite rugby league players.

Review of electrotechnologies used in the disinfection of water and wastewater. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

VandeVenter, L.W.

This report provides an overview of the disinfection practices used in water and wastewater treatment. Chlorine historically has been the disinfectant of choice for both water and wastewater, but with increased research and more stringent regulations, other disinfectants, namely ozone and ultraviolet irradiation, are being considered. The report summarizes the present and future applications of these technologies and defines possible opportunities for Demand- Side Management (DSM).

Review of electrotechnologies used in the disinfection of water and wastewater

DOE Office of Scientific and Technical Information (OSTI.GOV)

VandeVenter, L.W.

This report provides an overview of the disinfection practices used in water and wastewater treatment. Chlorine historically has been the disinfectant of choice for both water and wastewater, but with increased research and more stringent regulations, other disinfectants, namely ozone and ultraviolet irradiation, are being considered. The report summarizes the present and future applications of these technologies and defines possible opportunities for Demand- Side Management (DSM).

EPA'S PHOTOVOLTAIC DEMAND-SIDE MANAGEMENT COST-SHARED DEMONSTRATIONS

EPA Science Inventory

The paper discusses an investigation of how photovoltaics (PV) may be used as both a pollution-mitigating energy replacement for fossil fuels and a demand-side management (DSM) option to reduce peak electrical demands of commercial and residential buildings. leven electric utilit...

U.S. EPA'S PHOTOVOLTAIC DEMAND-SIDE MANAGEMENT PROJECT

EPA Science Inventory

The paper discusses an investigation of how photovoltaic (PV) may be used as both a pollution-mitigating energy replacement for fossil fuels and a demand-side management (DSM) option to reduce peak electrical demands of commercial and residential buildings. leven electric utiliti...

Primary care physician shortages could be eliminated through use of teams, nonphysicians, and electronic communication.

PubMed

Green, Linda V; Savin, Sergei; Lu, Yina

2013-01-01

Most existing estimates of the shortage of primary care physicians are based on simple ratios, such as one physician for every 2,500 patients. These estimates do not consider the impact of such ratios on patients' ability to get timely access to care. They also do not quantify the impact of changing patient demographics on the demand side and alternative methods of delivering care on the supply side. We used simulation methods to provide estimates of the number of primary care physicians needed, based on a comprehensive analysis considering access, demographics, and changing practice patterns. We show that the implementation of some increasingly popular operational changes in the ways clinicians deliver care-including the use of teams or "pods," better information technology and sharing of data, and the use of nonphysicians-have the potential to offset completely the increase in demand for physician services while improving access to care, thereby averting a primary care physician shortage.

Application of multi-tone mask technology in photolithographic fabrication of color filter components in LCD

NASA Astrophysics Data System (ADS)

Takada, Yoshihiro; Fukui, Matoko; Sai, Tsunehiro

2008-11-01

Recent progresses in the photoresists and photolithography for LCD industry applications have been primarily driven by the following two factors: advancement in the material performances (high resolution, high contrast ratio, low dielectric constant) for higher display quality, and cost reduction in the fabrication process. Along with crucial demand for cost competitiveness by improving production efficiency, environmental consciousness has been a major priority at fabrication process design to minimize the amount of waste produced. Having said the above, integration of two or more fabrication processes into a single process by using multi-tone mask technology has been the interest of research, due to its obvious advantage of reducing fabrication processes and cost. For example, multi-tone mask technology application has been widely employed on the TFT side to reduce the different types of photomasks being used. Similar trend has been employed on the CF side as well, where application of multi-tone mask technology is being investigated to integrate fabrication of multiple CF micro-components into a single process. In this presentation, we demonstrate a new approach of fabricating photospacer and peripheral CF components (MVA protrusion, sub-photospacers) in a single integrated process through multi-tone mask technology.

How a future energy world could look?

NASA Astrophysics Data System (ADS)

Ewert, M.

2012-10-01

The future energy system will change significantly within the next years as a result of the following Mega Trends: de-carbonization, urbanization, fast technology development, individualization, glocalization (globalization and localization) and changing demographics. Increasing fluctuating renewable production will change the role of non-renewable generation. Distributed energy from renewables and micro generation will change the direction of the energy flow in the electricity grids. Production will not follow demand but demand has to follow production. This future system is enabled by the fast technical development of information and communication technologies which will be present in the entire system. In this paper the results of a comprehensive analysis with different scenarios is summarized. Tools were used like the analysis of policy trends in the European countries, modelling of the European power grid, modelling of the European power markets and the analysis of technology developments with cost reduction potentials. With these tools the interaction of the main actors in the energy markets like conventional generation and renewable generation, grid transport, electricity storage including new storage options from E-Mobility, Power to Gas, Compressed Air Energy storage and demand side management were considered. The potential application of technologies and investments in new energy technologies were analyzed within existing frameworks and markets as well as new business models in new markets with different frameworks. In the paper the over all trend of this analysis is presented by describing a potential future energy world. This world represents only one of numerous options with comparable characteristics.

Demand-side policies to encourage the use of generic medicines: an overview.

PubMed

Dylst, Pieter; Vulto, Arnold; Simoens, Steven

2013-02-01

Demand-side policies to encourage the use of generic medicines are important to increase their use. A plethora of different demand-side policies has already been initiated by European governments, thereby targeting physicians, pharmacists and patients. This review aims to give an overview of the different demand-side policies which governments have at their disposal and to evaluate their impact on the use of generic medicines. Positive knowledge and perceptions of physicians, pharmacists and patients of generic medicines are necessary prerequisites to increase the use of generic medicines and governments should initiate policies to achieve this. These policies should be combined with policies to increase their financial responsibility to the healthcare system and policies to facilitate the prescribing of generic medicines.

Energy technologies evaluated against climate targets using a cost and carbon trade-off curve.

PubMed

Trancik, Jessika E; Cross-Call, Daniel

2013-06-18

Over the next few decades, severe cuts in emissions from energy will be required to meet global climate-change mitigation goals. These emission reductions imply a major shift toward low-carbon energy technologies, and the economic cost and technical feasibility of mitigation are therefore highly dependent upon the future performance of energy technologies. However, existing models do not readily translate into quantitative targets against which we can judge the dynamic performance of technologies. Here, we present a simple, new model for evaluating energy-supply technologies and their improvement trajectories against climate-change mitigation goals. We define a target for technology performance in terms of the carbon intensity of energy, consistent with emission reduction goals, and show how the target depends upon energy demand levels. Because the cost of energy determines the level of adoption, we then compare supply technologies to one another and to this target based on their position on a cost and carbon trade-off curve and how the position changes over time. Applying the model to U.S. electricity, we show that the target for carbon intensity will approach zero by midcentury for commonly cited emission reduction goals, even under a high demand-side efficiency scenario. For Chinese electricity, the carbon intensity target is relaxed and less certain because of lesser emission reductions and greater variability in energy demand projections. Examining a century-long database on changes in the cost-carbon space, we find that the magnitude of changes in cost and carbon intensity that are required to meet future performance targets is not unprecedented, providing some evidence that these targets are within engineering reach. The cost and carbon trade-off curve can be used to evaluate the dynamic performance of existing and new technologies against climate-change mitigation goals.

Financing pharmaceuticals in transition economies.

PubMed

Kanavos, P

1999-06-01

This paper (a) provides a methodological taxonomy of pricing, financing, reimbursement, and cost containment methodologies for pharmaceuticals; (b) analyzes complex agency relationships and the health versus industrial policy tradeoff; (c) pinpoints financing measures to balance safety and effectiveness of medicines and their affordability by publicly funded systems in transition; and (d) highlights viable options for policy-makers for the financing of pharmaceuticals in transition. Three categories of measures and their implications for pharmaceutical policy cost containing are analyzed: supply-side measures, targeting manufacturers, proxy demand-side measures, targeting physicians and pharmacists, and demand-side measures, targeting patients. In pursuing supply side measures, we explore free pricing for pharmaceuticals, direct price controls, cost-plus and cost pricing, average pricing and international price comparisons, profit control, reference pricing, the introduction of a fourth hurdle, positive and negative lists, and other price control measures. The analysis of proxy-demand measures includes budgets for physicians, generic policies, practice guidelines, monitoring the authorizing behavior of physicians, and disease management schemes. Demand-side measures explore the effectiveness of patient co-payments, the impact of allowing products over-the-counter and health promotion programs. Global policies should operate simultaneously on the supply, the proxy demand, and the demand-side. Policy-making needs to have a continuous long-term planning. The importation of policies into transition economy may require extensive and expensive adaptation, and/or lead to sub-optimal policy outcomes.

Energy Sustainability and the Green Campus.

ERIC Educational Resources Information Center

Simpson, Walter

2003-01-01

Discusses the importance of campus energy sustainability, explaining that both demand- and supply-side strategies are required. Suggests that on the demand side, an aggressive campus energy conservation program can reduce campus energy consumption by 30 percent or more. Asserts that addressing the supply side of the energy equation means shifting…

Policies to Enhance Prescribing Efficiency in Europe: Findings and Future Implications

PubMed Central

Godman, Brian; Shrank, William; Andersen, Morten; Berg, Christian; Bishop, Iain; Burkhardt, Thomas; Garuoliene, Kristina; Herholz, Harald; Joppi, Roberta; Kalaba, Marija; Laius, Ott; Lonsdale, Julie; Malmström, Rickard E.; Martikainen, Jaana E.; Samaluk, Vita; Sermet, Catherine; Schwabe, Ulrich; Teixeira, Inês; Tilson, Lesley; Tulunay, F. Cankat; Vlahović-Palčevski, Vera; Wendykowska, Kamila; Wettermark, Bjorn; Zara, Corinne; Gustafsson, Lars L.

2010-01-01

Introduction: European countries need to learn from each other to address unsustainable increases in pharmaceutical expenditures. Objective: To assess the influence of the many supply and demand-side initiatives introduced across Europe to enhance prescribing efficiency in ambulatory care. As a result provide future guidance to countries. Methods: Cross national retrospective observational study of utilization (DDDs – defined daily doses) and expenditure (Euros and local currency) of proton pump inhibitors (PPIs) and statins among 19 European countries and regions principally from 2001 to 2007. Demand-side measures categorized under the “4Es” – education engineering, economics, and enforcement. Results: Instigating supply side initiatives to lower the price of generics combined with demand-side measures to enhance their prescribing is important to maximize prescribing efficiency. Just addressing one component will limit potential efficiency gains. The influence of demand-side reforms appears additive, with multiple initiatives typically having a greater influence on increasing prescribing efficiency than single measures apart from potentially “enforcement.” There are also appreciable differences in expenditure (€/1000 inhabitants/year) between countries. Countries that have not introduced multiple demand side measures to counteract commercial pressures to enhance the prescribing of generics have seen considerably higher expenditures than those that have instigated a range of measures. Conclusions: There are considerable opportunities for European countries to enhance their prescribing efficiency, with countries already learning from each other. The 4E methodology allows European countries to concisely capture the range of current demand-side measures and plan for the future knowing that initiatives can be additive to further enhance their prescribing efficiency. PMID:21833180

Benchmark of Client and Server-Side Catchment Delineation Approaches on Web-Based Systems

NASA Astrophysics Data System (ADS)

Demir, I.; Sermet, M. Y.; Sit, M. A.

2016-12-01

Recent advances in internet and cyberinfrastructure technologies have provided the capability to acquire large scale spatial data from various gauges and sensor networks. The collection of environmental data increased demand for applications which are capable of managing and processing large-scale and high-resolution data sets. With the amount and resolution of data sets provided, one of the challenging tasks for organizing and customizing hydrological data sets is delineation of watersheds on demand. Watershed delineation is a process for creating a boundary that represents the contributing area for a specific control point or water outlet, with intent of characterization and analysis of portions of a study area. Although many GIS tools and software for watershed analysis are available on desktop systems, there is a need for web-based and client-side techniques for creating a dynamic and interactive environment for exploring hydrological data. In this project, we demonstrated several watershed delineation techniques on the web with various techniques implemented on the client-side using JavaScript and WebGL, and on the server-side using Python and C++. We also developed a client-side GPGPU (General Purpose Graphical Processing Unit) algorithm to analyze high-resolution terrain data for watershed delineation which allows parallelization using GPU. The web-based real-time analysis of watershed segmentation can be helpful for decision-makers and interested stakeholders while eliminating the need of installing complex software packages and dealing with large-scale data sets. Utilization of the client-side hardware resources also eliminates the need of servers due its crowdsourcing nature. Our goal for future work is to improve other hydrologic analysis methods such as rain flow tracking by adapting presented approaches.

Electricity decision-making: New techniques for calculating statewide economic impacts from new power supply and demand-side management programs

NASA Astrophysics Data System (ADS)

Tegen, Suzanne Isabel Helmholz

This dissertation introduces new techniques for calculating and comparing statewide economic impacts from new coal, natural gas and wind power plants, as well as from demand-side management programs. The impetus for this work was two-fold. First, reviews of current literature and projects revealed that there was no standard way to estimate statewide economic impacts from new supply- and demand-side electricity options. Second, decision-makers who were interviewed stated that they were overwhelmed with data in general, but also lacked enough specific information about economic development impacts to their states from electricity, to make informed choices. This dissertation includes chapters on electricity decision-making and on economic impacts from supply and demand. The supply chapter compares different electricity options in three states which vary in natural resource content: Arizona, Colorado and Michigan. To account for differing capacity factors, resources are compared on a per-megawatt-hour basis. The calculations of economic impacts from new supply include: materials and labor for construction, operations, maintenance, fuel extraction, fuel transport, as well as property tax, financing and landowner revenues. The demand-side chapter compares residential, commercial and industrial programs in Iowa. Impact calculations include: incremental labor and materials for program planning, installation and operations, as well as sales taxes and electricity saved. Results from supply-side calculations in the three states analyzed indicate that adding new wind power can have a greater impact to a state's economy than adding new gas or coal power due to resource location, taxes and infrastructure. Additionally, demand-side management programs have a higher relative percentage of in-state dollar flow than supply-side solutions, though demand-side programs typically involve fewer MWh and dollars than supply-side generation. Methods for this dissertation include researching existing models and data, gathering new data and interviews with industry representatives and policy makers. The new techniques are important for decision-makers, utilities, energy advocates and others who are concerned with economic development and in-state dollar flows from new electricity decisions.

Impact of urban sprawl on United States residential energy use

NASA Astrophysics Data System (ADS)

Rong, Fang

Improving energy efficiency through technological advances has been the focus of U.S. energy policy for decades. However, there is evidence that technology alone will be neither sufficient nor timely enough to solve looming crises associated with fossil fuel dependence and resulting greenhouse gas accumulation. Hence attention is shifting to demand-side measures. While the impact of urban sprawl on transportation energy use has been studied to a degree, the impact of sprawl on non-transport residential energy use represents a new area of inquiry. This dissertation is the first study linking sprawl to residential energy use and provides empirical support for compact land-use developments, which, as a demand-side measure, might play an important role in achieving sustainable residential energy consumption. This dissertation develops an original conceptual framework linking urban sprawl to residential energy use through electricity transmission and distribution losses and two mediators, housing stock and formation of urban heat islands. These two mediators are the focuses of this dissertation. By tapping multiple databases and performing statistical and geographical spatial analyses, this dissertation finds that (1) big houses consume more energy than small ones and single-family detached housing consumes more energy than multifamily or single-family attached housing; (2) residents of sprawling metro areas are more likely to live in single-family detached rather than attached or multifamily housing and are also expected to live in big houses; (3) a compact metro area is expected to have stronger urban heat island effects; (4) nationwide, urban heat island phenomena bring about a small energy reward, due to less energy demand on space heating, while they impose an energy penalty in States with a hot climate like Texas, due to higher energy demand for cooling; and taken all these together, (5) residents of sprawling metro areas are expected to consume more energy at home than residents of compact metro areas. This dissertation concludes with the policy implications that emerged from this study and suggestions for future research as well.

Agent-based modelling of consumer energy choices

NASA Astrophysics Data System (ADS)

Rai, Varun; Henry, Adam Douglas

2016-06-01

Strategies to mitigate global climate change should be grounded in a rigorous understanding of energy systems, particularly the factors that drive energy demand. Agent-based modelling (ABM) is a powerful tool for representing the complexities of energy demand, such as social interactions and spatial constraints. Unlike other approaches for modelling energy demand, ABM is not limited to studying perfectly rational agents or to abstracting micro details into system-level equations. Instead, ABM provides the ability to represent behaviours of energy consumers -- such as individual households -- using a range of theories, and to examine how the interaction of heterogeneous agents at the micro-level produces macro outcomes of importance to the global climate, such as the adoption of low-carbon behaviours and technologies over space and time. We provide an overview of ABM work in the area of consumer energy choices, with a focus on identifying specific ways in which ABM can improve understanding of both fundamental scientific and applied aspects of the demand side of energy to aid the design of better policies and programmes. Future research needs for improving the practice of ABM to better understand energy demand are also discussed.

Managing Sustainable Demand-side Infrastructure for Power System Ancillary Services

NASA Astrophysics Data System (ADS)

Parkinson, Simon Christopher

Widespread access to renewable electricity is seen as a viable method to mitigate carbon emissions, although problematic are the issues associated with the integration of the generation systems within current power system configurations. Wind power plants are the primary large-scale renewable generation technology applied globally, but display considerable short-term supply variability that is difficult to predict. Power systems are currently not designed to operate under these conditions, and results in the need to increase operating reserve in order to guarantee stability. Often, operating conventional generation as reserve is both technically and economically inefficient, which can overshadow positive benefits associated with renewable energy exploitation. The purpose of this thesis is to introduce and assess an alternative method of enhancing power system operations through the control of electric loads. In particular, this thesis focuses on managing highly-distributed sustainable demand-side infrastructure, in the form of heat pumps, electric vehicles, and electrolyzers, as dispatchable short-term energy balancing resources. The main contribution of the thesis is an optimal control strategy capable of simultaneously balancing grid- and demand-side objectives. The viability of the load control strategy is assessed through model-based simulations that explicitly track end-use functionality of responsive devices within a power systems analysis typically implemented to observe the effects of integrated wind energy systems. Results indicate that there is great potential for the proposed method to displace the need for increased reserve capacity in systems considering a high penetration of wind energy, thereby allowing conventional generation to operate more efficiently and avoid the need for possible capacity expansions.

Commercializing the echocardioscope: A case study in biomedical technology transfer

NASA Technical Reports Server (NTRS)

Enthoven, A. C.

1975-01-01

The echocardioscope does not meet reasonable criteria for a profitable investment opportunity for most companies. While a demand for the product is a necessary condition for profitability, it is not sufficient. There has to be something at work on the supply side, some significant patent, or an opportunity to achieve a cost advantage based on volume, or something to prevent other companies from being able to produce the same product at the same or a lower cost.

Altruism in the "Market" for Giving and Receiving: A Case of Higher Education.

ERIC Educational Resources Information Center

Yoo, Jang H.; Harrison, William B.

1989-01-01

Examines donations to colleges as an outcome of simultaneously solving supply and demand functions. Donors demand attention and prestige supplied by college fund raisers. Using data from 13 colleges, this econometric study shows that the demand side has a unitary elasticity concerning per person donations, while the supply side seems inelastic.…

UNEQUAL RISK: COMBAT OCCUPATIONS IN THE VOLUNTEER MILITARY

PubMed Central

MacLEAN, ALAIR; PARSONS, NICHOLAS L.

2011-01-01

This study evaluates the characteristics of the men who served in the volunteer military in combat occupations. It examines whether these characteristics stem from supply-side or demand-side decisions, or reflect class bias. The findings suggest that, on the supply side, men who had greater academic abilities were more likely to go to college, thereby avoiding military service and the possibility of serving in a combat occupation. On the demand side, the armed forces were more likely to exclude men with lower academic abilities but were more likely to assign such men in the military to combat occupations. Net of the impacts of these supply-side and demand-side decisions, men who served in combat occupations still differed from those who did not in terms of their family background. The impact of family background was stronger on entering the military than on being assigned to combat occupations once in the military. PMID:21691446

Four measures of transportation's economic importance

DOT National Transportation Integrated Search

2000-04-01

As a commodity, transportation has a supply side and a demand side. Unlike many other commodities, however, transportation's supply and demand overlap extensively. A significant portion of transportation : is provided by consumers for their own use. ...

A socio-technical investigation of the smart grid: Implications for demand-side activities of electricity service providers

NASA Astrophysics Data System (ADS)

Corbett, Jacqueline Marie

Enabled by advanced communication and information technologies, the smart grid represents a major transformation for the electricity sector. Vast quantities of data and two-way communications abilities create the potential for a flexible, data-driven, multi-directional supply and consumption network well equipped to meet the challenges of the next century. For electricity service providers ("utilities"), the smart grid provides opportunities for improved business practices and new business models; however, a transformation of such magnitude is not without risks. Three related studies are conducted to explore the implications of the smart grid on utilities' demand-side activities. An initial conceptual framework, based on organizational information processing theory, suggests that utilities' performance depends on the fit between the information processing requirements and capacities associated with a given demand-side activity. Using secondary data and multiple regression analyses, the first study finds, consistent with OIPT, a positive relationship between utilities' advanced meter deployments and demand-side management performance. However, it also finds that meters with only data collection capacities are associated with lower performance, suggesting the presence of information waste causing operational inefficiencies. In the second study, interviews with industry participants provide partial support for the initial conceptual model, new insights are gained with respect to information processing fit and information waste, and "big data" is identified as a central theme of the smart grid. To derive richer theoretical insights, the third study employs a grounded theory approach examining the experience of one successful utility in detail. Based on interviews and documentary data, the paradox of dynamic stability emerges as an essential enabler of utilities' performance in the smart grid environment. Within this context, the frames of opportunity, control, and data limitation interact to support dynamic stability and contribute to innovation within tradition. The main contributions of this thesis include theoretical extensions to OIPT and the development of an emergent model of dynamic stability in relation to big data. The thesis also adds to the green IS literature and identifies important practical implications for utilities as they endeavour to bring the smart grid to reality.

Demand-side financing measures to increase maternal health service utilisation and improve health outcomes: a systematic review of evidence from low- and middle-income countries.

PubMed

Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

2012-01-01

In many countries financing for health services has traditionally been disbursed directly from governmental and non-governmental funding agencies to providers of services: the 'supply-side' of healthcare markets. Demand-side financing offers a supplementary model in which some funds are instead channelled through, or to, prospective users. In this review we considered evidence on five forms of demand-side financing that have been used to promote maternal health in developing countries: OBJECTIVES: The overall review objective was to assess the effects of demand-side financing interventions on maternal health service utilisation and on maternal health outcomes in low- and middle-income countries. Broader effects on perinatal and infant health, the situation of underprivileged women and the health care system were also assessed. This review considered poor, rural or socially excluded women of all ages who were either pregnant or within 42 days of the conclusion of pregnancy, the limit for postnatal care as defined by the World Health Organization. The review also considered the providers of services.The intervention of interest was any programme that incorporated demand-side financing as a mechanism to increase the consumption of goods and services that could impact on maternal health outcomes. This included the direct consumption of maternal health care goods and services as well as related 'merit goods' such as improved nutrition. We included systems in which potential users of maternal health services are financially empowered to make restricted decisions on buying maternal health-related goods or services - sometimes known as consumer-led demand-side financing. We also included programmes that provided unconditional cash benefits to pregnant women (for example in the form of maternity allowances), or to families with children under five years of age where there was evidence concerning maternal health outcomes.We aimed to include quantitative studies (experimental, observational and descriptive), qualitative studies (including designs based on phenomenology, grounded theory, ethnography, action research and feminist research), and economic studies (cost-effectiveness, cost-utility and costs studies). The Joanna Briggs Institute methodology for mixed-method systematic reviews was adopted. A three-step systematic search strategy was used to: 1) identify key terms, 2) search bibliographic databases and 3) retrieve additional publications from reference lists and sources of grey literature. Data were extracted from papers included in the review using the standardised data extraction tools for quantitative, qualitative and economic data from the Joanna Briggs Institute System for the Unified Management, Assessment and Review of Information. The quantitative and economic findings are presented in narrative form. Qualitative research findings were pooled using the Joanna Briggs Institute Qualitative Assessment and Review Instrument. This involved the aggregation or synthesis of findings to generate a set of statements that represent that aggregation, through assembling the findings (Level 1 findings), and categorising these findings on the basis of similarity in meaning (Level 2 findings). These categories were then subjected to a meta-synthesis in order to produce a single comprehensive set of synthesised findings (Level 3 findings) that can be used as a basis for evidence-based practice or policy. Seventy-two studies were included in the review. Drawing on work from several continents, many of the included studies were reports and evaluations for relevant government or funding agencies and represented important lesson-learning about implementation issues. However, fewer than half were published in peer reviewed journals and few were of high research quality.For three modes of demand-side financing (conditional cash transfers, payments to offset costs of access to maternal healthcare, and vouchers for maternity services) we found evidence relevant to review questions on the utilisation of maternal health services, barriers to the provision of demand-side financing and supply-side preconditions to implementing demand-side financing schemes. There was insufficient evidence to provide comprehensive answers for review questions on the effect of demand-side financing interventions on maternal, perinatal and infant health outcomes and on the social and financial situation of underprivileged women. There was also insufficient evidence on the cost-effectiveness of demand-side financing interventions and preconditions for sustainability and scale-up of demand-side financing schemes.Salient recommendations for policymakers regarding demand-side financing for maternal health derived from the current evidence are:There is a pressing need for large, robust studies on the short- and longer-term impact of demand-side financing on maternal and infant mortality and morbidity, which should also reflect 'good practice' indicators such as the uptake and duration of exclusive breastfeeding and compliance with infant immunisation programmes. It is also important that the impact on outcomes of subsequent pregnancies is evaluated. Moderate and large-sized demand-side financing programmes that have recently or will soon be scaled up, such as those in Kenya, Uganda and Bangladesh, represent the most obvious sites for such evaluations, and lessons may be learnt from Mexico's PROGRESA/ Oportunidades about how to establish a well-embedded monitoring and rigorous evaluation structure.Other important areas that require further study include.

DSM Electricity Savings Potential in the Buildings Sector in APP Countries

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNeil, MIchael; Letschert, Virginie; Shen, Bo

2011-01-12

The global economy has grown rapidly over the past decade with a commensurate growth in the demand for electricity services that has increased a country's vulnerability to energy supply disruptions. Increasing need of reliable and affordable electricity supply is a challenge which is before every Asia Pacific Partnership (APP) country. Collaboration between APP members has been extremely fruitful in identifying potential efficiency upgrades and implementing clean technology in the supply side of the power sector as well established the beginnings of collaboration. However, significantly more effort needs to be focused on demand side potential in each country. Demand side managementmore » or DSM in this case is a policy measure that promotes energy efficiency as an alternative to increasing electricity supply. It uses financial or other incentives to slow demand growth on condition that the incremental cost needed is less than the cost of increasing supply. Such DSM measures provide an alternative to building power supply capacity The type of financial incentives comprise of rebates (subsidies), tax exemptions, reduced interest loans, etc. Other approaches include the utilization of a cap and trade scheme to foster energy efficiency projects by creating a market where savings are valued. Under this scheme, greenhouse gas (GHG) emissions associated with the production of electricity are capped and electricity retailers are required to meet the target partially or entirely through energy efficiency activities. Implementation of DSM projects is very much in the early stages in several of the APP countries or localized to a regional part of the country. The purpose of this project is to review the different types of DSM programs experienced by APP countries and to estimate the overall future potential for cost-effective demand-side efficiency improvements in buildings sectors in the 7 APP countries through the year 2030. Overall, the savings potential is estimated to be 1.7 thousand TWh or 21percent of the 2030 projected base case electricity demand. Electricity savings potential ranges from a high of 38percent in India to a low of 9percent in Korea for the two sectors. Lighting, fans, and TV sets and lighting and refrigeration are the largest contributors to residential and commercial electricity savings respectively. This work presents a first estimates of the savings potential of DSM programs in APP countries. While the resulting estimates are based on detailed end-use data, it is worth keeping in mind that more work is needed to overcome limitation in data at this time of the project.« less

A 'demand side' estimate of the dollar value of the cannabis black market in New Zealand.

PubMed

Wilkins, Chris; Bhatta, Krishna; Casswell, Sally

2002-06-01

The dollar value of an illicit drug market is an important statistic in drug policy analysis. It can be used to illustrate the scale of the trade in a drug; evaluate its impact on a local community or nation; provide an indication of the level of criminality related to a drug; and can inform discussions of future drug policy options. This paper calculates the first ever demand side estimates of the New Zealand cannabis black market. The estimates produced are calculated using cannabis consumption data from the Alcohol & Public Health Research Unit's (APHRU) 1998 National Drug Survey. The wholesale value of the market is estimated to be 81.3-104.6 million dollars a year, and the retail value of the market is estimated to be 131.3-168.9 million dollars a year. These demand side estimates are much lower than the existing supply side estimates of the market calculated using police seizures of cannabis plants. The retail figure is four times lower than the lowest national supply side estimate (636 million dollars) and seven times lower than the highest national supply side estimate (1.27 billion dollars). The demand side estimates suggest a much smaller cannabis economy to fuel organized criminal activity in New Zealand than previous estimates implied.

Sailboard Fin Design

NASA Technical Reports Server (NTRS)

1992-01-01

In high performance boardsailing, demands on the vertical fin or "skeg" often produce "spinout" - when the skeg loses horizontal lift creating a force imbalance and causing the tail of the board to slide sideways. Richard Caldwell, RACE Technology, Inc. used NASA airfoil technology to solve this problem and formed a business based on his solution. After determining that the spinout resulted from air ventilating down the low pressure side of the underwater fin, he adapted the airfoil technology to the design of a short board skeg, which would overcome the problem and lower the drag, resulting in improved performance. He patented his RACE 145 foil section, formed his company and later returned to Langley for additional technical assistance. The company's newest product is a rigid sail that also incorporates NASA technology and has excellent performance. This company no longer exists - product is no longer in production.

Thin film encapsulation for flexible AM-OLED: a review

NASA Astrophysics Data System (ADS)

Park, Jin-Seong; Chae, Heeyeop; Chung, Ho Kyoon; In Lee, Sang

2011-03-01

Flexible organic light emitting diode (OLED) will be the ultimate display technology to customers and industries in the near future but the challenges are still being unveiled one by one. Thin-film encapsulation (TFE) technology is the most demanding requirement to prevent water and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This work provides a review of promising thin-film barrier technologies as well as the basic gas diffusion background. Topics include the significance of the device structure, permeation rate measurement, proposed permeation mechanism, and thin-film deposition technologies (Vitex system and atomic layer deposition (ALD)/molecular layer deposition (MLD)) for effective barrier films.

The Conceptualization of Value in the Value Proposition of New Health Technologies Comment on "Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies".

PubMed

Buttigieg, Sandra C; Hoof, Joost van

2017-07-03

Lehoux et al provide a highly valid contribution in conceptualizing value in value propositions for new health technologies and developing an analytic framework that illustrates the interplay between health innovation supply-side logic (the logic of emergence) and demand-side logic (embedding in the healthcare system). This commentary brings forth several considerations on this article. First, a detailed stakeholder analysis provides the necessary premonition of potential hurdles in the development, implementation and dissemination of a new technology. This can be achieved by categorizing potential stakeholder groups on the basis of the potential impact of future technology. Secondly, the conceptualization of value in value propositions of new technologies should not only embrace business/economic and clinical values but also ethical, professional and cultural values, as well as factoring in the notion of usability and acceptance of new technology. As a final note, the commentary emphasises the point that technology should facilitate delivery of care without negatively affecting doctor-patient communications, physical examination skills, and development of clinical knowledge. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

CO2 Mitigation Measures of Power Sector and Its Integrated Optimization in China

PubMed Central

Dai, Pan; Chen, Guang; Zhou, Hao; Su, Meirong; Bao, Haixia

2012-01-01

Power sector is responsible for about 40% of the total CO2 emissions in the world and plays a leading role in climate change mitigation. In this study, measures that lower CO2 emissions from the supply side, demand side, and power grid are discussed, based on which, an integrated optimization model of CO2 mitigation (IOCM) is proposed. Virtual energy, referring to energy saving capacity in both demand side and the power grid, together with conventional energy in supply side, is unified planning for IOCM. Consequently, the optimal plan of energy distribution, considering both economic benefits and mitigation benefits, is figured out through the application of IOCM. The results indicate that development of demand side management (DSM) and smart grid can make great contributions to CO2 mitigation of power sector in China by reducing the CO2 emissions by 10.02% and 12.59%, respectively, in 2015, and in 2020. PMID:23213305

Intelligent demand side management of residential building energy systems

NASA Astrophysics Data System (ADS)

Sinha, Maruti N.

Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

NASA Astrophysics Data System (ADS)

Santarius, Tilman

2015-03-01

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may `eat up' parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential `psychological rebound effects.' It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough "rule of thumb", in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

The Bright Elusive Butterfly of Value in Health Technology Development Comment on "Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies".

PubMed

Greenhalgh, Trisha; Fahy, Nick; Shaw, Sara

2017-05-29

The current system of health technology development is characterised by multiple misalignments. The "supply" side (innovation policy-makers, entrepreneurs, investors) and the "demand" side (health policy-makers, regulators, health technology assessment, purchasers) operate under different - and conflicting - logics. The system is less a "pathway" than an unstable ecosystem of multiple interacting sub-systems. "Value" means different things to each of the numerous actors involved. Supply-side dynamics are built on fictions; regulatory checks and balances are designed to assure quality, safety and efficacy, not to ensure that technologies entering the market are either desirable or cost-effective. Assessment of comparative and cost-effectiveness usually comes too late in the process to shape an innovation's development. We offer no simple solutions to these problems, but in the spirit of commencing a much-needed public debate, we suggest some tentative ways forward. First, universities and public research funders should play a more proactive role in shaping the system. Second, the role of industry in forging long-term strategic partnerships for public benefit should be acknowledged (though not uncritically). Third, models of "responsible innovation" and public input to research priority-setting should be explored. Finally, the evidence base on how best to govern inter-sectoral health research partnerships should be developed and applied. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Demand-Side Job Development and System Change.

ERIC Educational Resources Information Center

Gilbride, Dennis; Stensrud, Robert

1999-01-01

Authors discuss demand-side job development as a model for improving and providing rehabilitation services to consumers and employers. It stresses quality employment outcomes, consumer choice and empowerment, and a productive partnership between consumer and counselor. Delineates systemic challenges this model poses to traditional vocational…

Issues facing the future health care workforce: the importance of demand modelling

PubMed Central

Segal, Leonie; Bolton, Tom

2009-01-01

This article examines issues facing the future health care workforce in Australia in light of factors such as population ageing. It has been argued that population ageing in Australia is affecting the supply of health care professionals as the health workforce ages and at the same time increasing the demand for health care services and the health care workforce. However, the picture is not that simple. The health workforce market in Australia is influenced by a wide range of factors; on the demand side by increasing levels of income and wealth, emergence of new technologies, changing disease profiles, changing public health priorities and a focus on the prevention of chronic disease. While a strong correlation is observed between age and use of health care services (and thus health care workforce), this is mediated through illness, as typified by the consistent finding of higher health care costs in the months preceding death. On the supply side, the health workforce is highly influenced by policy drivers; both national policies (eg funded education and training places) and local policies (eg work place-based retention policies). Population ageing and ageing of the health workforce is not a dominant influence. In recent years, the Australian health care workforce has grown in excess of overall workforce growth, despite an ageing health workforce. We also note that current levels of workforce supply compare favourably with many OECD countries. The future of the health workforce will be shaped by a number of complex interacting factors. Market failure, a key feature of the market for health care services which is also observed in the health care labour market – means that imbalances between demand and supply can develop and persist, and suggests a role for health workforce planning to improve efficiency in the health services sector. Current approaches to health workforce planning, especially on the demand side, tend to be highly simplistic. These include historical allocation methods, such as the personnel-to-population ratios which are essentially circular in their rationale rather than evidence-based. This article highlights the importance of evidence-based demand modelling for those seeking to plan for the future Australian health care workforce. A model based on population health status and best practice protocols for health care is briefly outlined. PMID:19422686

Issues facing the future health care workforce: the importance of demand modelling.

PubMed

Segal, Leonie; Bolton, Tom

2009-05-07

This article examines issues facing the future health care workforce in Australia in light of factors such as population ageing. It has been argued that population ageing in Australia is affecting the supply of health care professionals as the health workforce ages and at the same time increasing the demand for health care services and the health care workforce.However, the picture is not that simple. The health workforce market in Australia is influenced by a wide range of factors; on the demand side by increasing levels of income and wealth, emergence of new technologies, changing disease profiles, changing public health priorities and a focus on the prevention of chronic disease. While a strong correlation is observed between age and use of health care services (and thus health care workforce), this is mediated through illness, as typified by the consistent finding of higher health care costs in the months preceding death.On the supply side, the health workforce is highly influenced by policy drivers; both national policies (eg funded education and training places) and local policies (eg work place-based retention policies). Population ageing and ageing of the health workforce is not a dominant influence. In recent years, the Australian health care workforce has grown in excess of overall workforce growth, despite an ageing health workforce. We also note that current levels of workforce supply compare favourably with many OECD countries. The future of the health workforce will be shaped by a number of complex interacting factors.Market failure, a key feature of the market for health care services which is also observed in the health care labour market - means that imbalances between demand and supply can develop and persist, and suggests a role for health workforce planning to improve efficiency in the health services sector. Current approaches to health workforce planning, especially on the demand side, tend to be highly simplistic. These include historical allocation methods, such as the personnel-to-population ratios which are essentially circular in their rationale rather than evidence-based. This article highlights the importance of evidence-based demand modelling for those seeking to plan for the future Australian health care workforce. A model based on population health status and best practice protocols for health care is briefly outlined.

Multi-criteria assessment of energy conversion systems by means of thermodynamic, economic and environmental parameters

NASA Astrophysics Data System (ADS)

Becerra Lopez, Humberto Ruben

2007-12-01

High expansion of power demand is expected in the Upper Rio Grande region (El Paso, Hudspeth, Culberson, Jeff Davis, Presidio and Brewster counties) as a result of both electrical demand growth and decommissioning of installed capacity. On the supply side a notable deployment of renewable power technologies can be projected owing to the recent introduction of a new energy policy in Texas, which attempts to reach 10,000 installed-MWe of renewable capacity for 2025. Power generation fueled by natural-gas might consistently expand due to the encouraged use of this fuel. In this context the array of participating technologies can be optimized, which, within a sustainability framework, translates into a multidimensional problem. The solution to the problem is presented through this dissertation in two main parts. The first part solves the thermodynamic-environmental problem through developing a dynamic model to project maximum allowable expansion of technologies. Predetermined alternatives include diverse renewable energy technologies (wind turbine, photovoltaic conversion, hybrid solar thermal parabolic trough, and solid oxide fuel cells), a conventional fossil-fuel technology (natural gas combined-cycle), and a breakthrough fossil-fuel technology (solid oxide fuel cells). The analysis is based on the concept of cumulative exergy consumption, expanded to include abatement of emissions. A Gompertz sigmoid growth is assumed and constrained by both exergetic self-sustenance and regional energy resource availability. This part of the analysis assumes that power demand expansion is met by full deployment of alternative technologies backed up by conventional technology. Results show that through a proper allowance for exergy reinvestment the power demand expansion may be met largely by alternative technologies minimizing the primary resource depletion. The second part of the study makes use of the dynamic model to support a multi-objective optimization routine, where the exergetic and economic costs are established as primary competing factors. An optimization algorithm is implemented using the constraint method. The solution is given as Pareto optimality with arrays for minimum cost and possible arrays for the tradeoff front. These arrays are further analyzed in terms of sustainability, cumulative exergy loss (i.e. irreversibilities and waste exergy) and incremental economic cost, and the results are compared with the goals of current legislated energy policy.

Changing HIV treatment eligibility under health system constraints in sub-Saharan Africa: investment needs, population health gains, and cost-effectiveness

PubMed Central

Hontelez, Jan A.C.; Chang, Angela Y.; Ogbuoji, Osondu; de Vlas, Sake J.; Bärnighausen, Till; Atun, Rifat

2016-01-01

Objective: We estimated the investment needs, population health gains, and cost-effectiveness of different policy options for scaling-up prevention and treatment of HIV in the 10 countries that currently comprise 80% of all people living with HIV in sub-Saharan Africa (Ethiopia, Kenya, Malawi, Mozambique, Nigeria, South Africa, Tanzania, Uganda, Zambia, and Zimbabwe). Design: We adapted the established STDSIM model to capture the health system dynamics: demand-side and supply-side constraints in the delivery of antiretroviral treatment (ART). Methods: We compared different scenarios of supply-side (i.e. health system capacity) and demand-side (i.e. health seeking behavior) constraints, and determined the impact of changing guidelines to ART eligibility at any CD4+ cell count within these constraints. Results: Continuing current scale-up would require US$178 billion by 2050. Changing guidelines to ART at any CD4+ cell count is cost-effective under all constraints tested in the model, especially in demand-side constrained health systems because earlier initiation prevents loss-to-follow-up of patients not yet eligible. Changing guidelines under current demand-side constraints would avert 1.8 million infections at US$208 per life-year saved. Conclusion: Treatment eligibility at any CD4+ cell count would be cost-effective, even under health system constraints. Excessive loss-to-follow-up and mortality in patients not eligible for treatment can be avoided by changing guidelines in demand-side constrained systems. The financial obligation for sustaining the AIDS response in sub-Saharan Africa over the next 35 years is substantial and requires strong, long-term commitment of policy-makers and donors to continue to allocate substantial parts of their budgets. PMID:27367487

Changing HIV treatment eligibility under health system constraints in sub-Saharan Africa: investment needs, population health gains, and cost-effectiveness.

PubMed

Hontelez, Jan A C; Chang, Angela Y; Ogbuoji, Osondu; de Vlas, Sake J; Bärnighausen, Till; Atun, Rifat

2016-09-24

We estimated the investment needs, population health gains, and cost-effectiveness of different policy options for scaling-up prevention and treatment of HIV in the 10 countries that currently comprise 80% of all people living with HIV in sub-Saharan Africa (Ethiopia, Kenya, Malawi, Mozambique, Nigeria, South Africa, Tanzania, Uganda, Zambia, and Zimbabwe). We adapted the established STDSIM model to capture the health system dynamics: demand-side and supply-side constraints in the delivery of antiretroviral treatment (ART). We compared different scenarios of supply-side (i.e. health system capacity) and demand-side (i.e. health seeking behavior) constraints, and determined the impact of changing guidelines to ART eligibility at any CD4 cell count within these constraints. Continuing current scale-up would require US$178 billion by 2050. Changing guidelines to ART at any CD4 cell count is cost-effective under all constraints tested in the model, especially in demand-side constrained health systems because earlier initiation prevents loss-to-follow-up of patients not yet eligible. Changing guidelines under current demand-side constraints would avert 1.8 million infections at US$208 per life-year saved. Treatment eligibility at any CD4 cell count would be cost-effective, even under health system constraints. Excessive loss-to-follow-up and mortality in patients not eligible for treatment can be avoided by changing guidelines in demand-side constrained systems. The financial obligation for sustaining the AIDS response in sub-Saharan Africa over the next 35 years is substantial and requires strong, long-term commitment of policy-makers and donors to continue to allocate substantial parts of their budgets.

Towards Design of Sustainable Energy Systems in Developing Countries: Centralized and Localized Options

NASA Astrophysics Data System (ADS)

Kursun, Berrin

Energy use in developing countries is projected to equal and exceed the demand in developed countries in the next five years. Growing concern about environmental problems, depletion and price fluctuation of fossil fuels pushes the efforts for meeting energy demand in an environmentally friendly and sustainable way. Hence, it is essential to design energy systems consisting of centralized and localized options that generate the optimum energy mix to meet this increasing energy demand in a sustainable manner. In this study, we try to answer the question, "How can the energy demand in Rampura village be met sustainably?" via two centralized clean coal (CCC) technology and three localized energy technology options analyzed. We perform the analysis of these energy technologies through joint use of donor-side analysis technique emergy analysis (EA) and user-side analysis technique life cycle assessment (LCA). Sustainability of such an energy combination depends on its reliance on renewable inputs rather than nonrenewable or purchased inputs. CCC technologies are unsustainable energy systems dependent on purchased external inputs almost 100%. However, increased efficiency and significantly lower environmental impacts of CCC technologies can lead to more environmentally benign utilization of coal as an energy source. CCC technologies supply electricity at a lower price compared to the localized energy options investigated. Localized energy options analyzed include multi-crystalline solar PV, floating drum biogas digester and downdraft biomass gasifier. Solar PV has the lowest water and land use, however, solar electricity has the highest price with a high global warming potential (GWP). Contrary to general opinion, solar electricity is highly non-renewable. Although solar energy is a 100% renewable natural resource, materials utilized in the production of solar panels are mostly non-renewable purchased inputs causing the low renewability of solar electricity. Best sustainability results are obtained for full capacity operation in anaerobic digestion and for single fuel mode (SFM) operation in biomass gasification. For both of the processes, cost of electricity reduces 2-3 times if they are operated properly. However, there is not enough ipomea to run the biomass gasifier in SFM in Rampura, hence optimum operation scheme is ideal dual fuel mode (DFM) operation for the biomass gasifier analyzed. Emergy analysis of Rampura village and its subsystems reveal that sustainability is not achieved both at the village and in the subsystems levels since they are highly dependent on non-renewable material and energy inputs. To improve the overall sustainability in Rampura, dependency on purchased inputs fodder, fertilizer and diesel, non-renewable cooking fuel wood should be reduced. In satisfying energy demand in Rampura, biogas cooking and 70% biogas cooking scenarios perform better than electricity options in all of the objectives considered. Other than minimum land and water use objectives, electricity-RM and electricity-GM scenarios overlap and do not have a significant difference in terms of performance. Based on these results, the best option to meet the energy demand in Rampura would be to meet all the cooking energy with direct use of biogas. However, 70% biogas cooking scenario may be a more practical option since it both satisfies energy demand in an environmentally benign manner and satisfies the cultural needs of Rampura people. When 30% of cooking is performed by utilizing improved biomass cook stoves in the traditional way, the biogas potential becomes enough to meet all the remaining energy demand (70% of cooking, lighting and irrigation) in Rampura, hence energy security and reliability are ensured. Furthermore, utilizing biogas for cooking enables more agricultural residues to be available as fodder and eases the pressure on environment due to excessive woody biomass harvesting. Additionally, CH4 emissions from cow dung are avoided via production of biogas while the sanitation improves in the area. The GHG emissions related to cooking with inefficient cook stoves are also significantly mitigated through the use of biogas and improved biomass cook stoves. Energy demand in developing countries is subject to increase with increasing prosperity and consumerism. This increasing energy demand will necessitate the utilization of centralized energy options even in the rural areas of developing countries in the near future. Utilizing centralized clean coal technologies to meet this demand can ease energy related environmental problems, especially global warming significantly. And, adopting conscious and renewable energy oriented consumption patterns, avoiding consumption beyond the carrying capacity of these regions can contribute to achieve global level sustainability and ease the environmental burdens and problems in the developing countries.

The collision between research and teaching: destructive crash or beneficial fusion?

NASA Astrophysics Data System (ADS)

Wieman, Carl

2005-04-01

Every research active faculty member struggles to balance the time demands of research and classroom teaching. I will discuss how to minimize the inevitable conflict by finding ideas and strategies by which one activity can benefit the other. On the teaching side, examples include: 1) knowing the research literature (on learning) and using the research model of saving time and improving success by copying and building on past work; 2) making expert (i. e. your) reasoning, problem-solving strategies, and meaningful problems a major part of teaching; and 3) using technology effectively. On the research side, examples include using the research on learning and teaching both to improve the training of graduate research assistants and to present your research results in a more engaging meaningful fashion.

How much land-based greenhouse gas mitigation can be achieved without compromising food security and environmental goals?

PubMed

Smith, Pete; Haberl, Helmut; Popp, Alexander; Erb, Karl-Heinz; Lauk, Christian; Harper, Richard; Tubiello, Francesco N; de Siqueira Pinto, Alexandre; Jafari, Mostafa; Sohi, Saran; Masera, Omar; Böttcher, Hannes; Berndes, Göran; Bustamante, Mercedes; Ahammad, Helal; Clark, Harry; Dong, Hongmin; Elsiddig, Elnour A; Mbow, Cheikh; Ravindranath, Nijavalli H; Rice, Charles W; Robledo Abad, Carmenza; Romanovskaya, Anna; Sperling, Frank; Herrero, Mario; House, Joanna I; Rose, Steven

2013-08-01

Feeding 9-10 billion people by 2050 and preventing dangerous climate change are two of the greatest challenges facing humanity. Both challenges must be met while reducing the impact of land management on ecosystem services that deliver vital goods and services, and support human health and well-being. Few studies to date have considered the interactions between these challenges. In this study we briefly outline the challenges, review the supply- and demand-side climate mitigation potential available in the Agriculture, Forestry and Other Land Use AFOLU sector and options for delivering food security. We briefly outline some of the synergies and trade-offs afforded by mitigation practices, before presenting an assessment of the mitigation potential possible in the AFOLU sector under possible future scenarios in which demand-side measures codeliver to aid food security. We conclude that while supply-side mitigation measures, such as changes in land management, might either enhance or negatively impact food security, demand-side mitigation measures, such as reduced waste or demand for livestock products, should benefit both food security and greenhouse gas (GHG) mitigation. Demand-side measures offer a greater potential (1.5-15.6 Gt CO2 -eq. yr(-1) ) in meeting both challenges than do supply-side measures (1.5-4.3 Gt CO2 -eq. yr(-1) at carbon prices between 20 and 100 US$ tCO2 -eq. yr(-1) ), but given the enormity of challenges, all options need to be considered. Supply-side measures should be implemented immediately, focussing on those that allow the production of more agricultural product per unit of input. For demand-side measures, given the difficulties in their implementation and lag in their effectiveness, policy should be introduced quickly, and should aim to codeliver to other policy agenda, such as improving environmental quality or improving dietary health. These problems facing humanity in the 21st Century are extremely challenging, and policy that addresses multiple objectives is required now more than ever. © 2013 John Wiley & Sons Ltd.

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

EPA Science Inventory

This study investigated the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The project was sponsored by the U.S. Environmental Protection Agency (EPA) and 11 electric utilities. This ar...

Energy Demand-Side Management: New Perspectives for a New Era

ERIC Educational Resources Information Center

Carley, Sanya

2012-01-01

Over the past decade and a half, state governments have assumed greater responsibility over demand-side management (DSM) operations. Whereas DSM programs formerly were initiated primarily by utilities or state public utility commissions, they are now becoming increasingly state-initiated and incentivized through funding mechanisms or…

Ground-source heat pump case studies and utility programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lienau, P.J.; Boyd, T.L.; Rogers, R.L.

1995-04-01

Ground-source heat pump systems are one of the promising new energy technologies that has shown rapid increase in usage over the past ten years in the United States. These systems offer substantial benefits to consumers and utilities in energy (kWh) and demand (kW) savings. The purpose of this study was to determine what existing monitored data was available mainly from electric utilities on heat pump performance, energy savings and demand reduction for residential, school and commercial building applications. In order to verify the performance, information was collected for 253 case studies from mainly utilities throughout the United States. The casemore » studies were compiled into a database. The database was organized into general information, system information, ground system information, system performance, and additional information. Information was developed on the status of demand-side management of ground-source heat pump programs for about 60 electric utility and rural electric cooperatives on marketing, incentive programs, barriers to market penetration, number units installed in service area, and benefits.« less

Universal model of slow pyrolysis technology producing biochar and heat from standard biomass needed for the techno-economic assessment.

PubMed

Klinar, Dušan

2016-04-01

Biochar as a soil amendment and carbon sink becomes in last period one of the vast, interesting product of slow pyrolysis. Simplest and most used industrial process arrangement is a production of biochar and heat at the same time. Proposed mass and heat balance model consist of heat consumers (heat demand side) and heat generation-supply side. Direct burning of all generated uncondensed volatiles from biomass provides heat. Calculation of the mass and heat balance of both sides reveals the internal distribution of masses and energy inside process streams and units. Thermodynamic calculations verified not only the concept but also numerical range of the results. The comparisons with recent published scientific and vendors data prove its general applicability and reliability. The model opens the possibility for process efficiency innovations. Finally, the model was adapted to give more investors favorable results and support techno-economic assessments entirely. Copyright © 2016 Elsevier Ltd. All rights reserved.

Who has a clue to preventing the flu? Unravelling supply and demand effects on the take-up of influenza vaccinations.

PubMed

Maurer, Jürgen

2009-05-01

Influenza is a serious disease, especially for older people, and incomplete vaccination take-up poses a major public health challenge. On both the side of physicians and patients, there could be promising channels for increasing immunization rates, but no attempt has yet been made to empirically unravel their respective influences. Using exclusion restrictions implied by an economic model of physician-patient interactions, our study quantifies the particular effects of supply and demand on influenza immunization. On the supply side, our estimates highlight the importance of physician agency and physician quality, while a patient's education and health behaviors are key demand side factors.

Review of Strategies and Technologies for Demand-Side Management on Isolated Mini-Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harper, Meg

This review provides an overview of strategies and currently available technologies used for demandside management (DSM) on mini-grids throughout the world. For the purposes of this review, mini-grids are defined as village-scale electricity distribution systems powered by small local generation sources and not connected to a main grid.1 Mini-grids range in size from less than 1 kW to several hundred kW of installed generation capacity and may utilize different generation technologies, such as micro-hydro, biomass gasification, solar, wind, diesel generators, or a hybrid combination of any of these. This review will primarily refer to AC mini-grids, though much of themore » discussion could apply to DC grids as well. Many mini-grids include energy storage, though some rely solely on real-time generation.« less

Adaptive Transmission Planning: Implementing a New Paradigm for Managing Economic Risks in Grid Expansion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobbs, Benjamin F.; Xu, Qingyu; Ho, Jonathan

The problem of whether, where, when, and what types of transmission facilities to build in terms of minimizing costs and maximizing net economic benefits has been a challenge for the power industry from the beginning-ever since Thomas Edison debated whether to create longer dc distribution lines (with their high losses) or build new power stations in expanding his urban markets. Today's planning decisions are far more complex, as grids cover the continent and new transmission, generation, and demand-side technologies emerge.

Skin resurfacing procedures: new and emerging options

PubMed Central

Loesch, Mathew M; Somani, Ally-Khan; Kingsley, Melanie M; Travers, Jeffrey B; Spandau, Dan F

2014-01-01

The demand for skin resurfacing and rejuvenating procedures has progressively increased in the last decade and has sparked several advances within the skin resurfacing field that promote faster healing while minimizing downtime and side effects for patients. Several technological and procedural skin resurfacing developments are being integrated into clinical practices today allowing clinicians to treat a broader range of patients’ skin types and pathologies than in years past, with noteworthy outcomes. This article will discuss some emerging and developing resurfacing therapies and treatments that are present today and soon to be available. PMID:25210469

Skin resurfacing procedures: new and emerging options.

PubMed

Loesch, Mathew M; Somani, Ally-Khan; Kingsley, Melanie M; Travers, Jeffrey B; Spandau, Dan F

2014-01-01

The demand for skin resurfacing and rejuvenating procedures has progressively increased in the last decade and has sparked several advances within the skin resurfacing field that promote faster healing while minimizing downtime and side effects for patients. Several technological and procedural skin resurfacing developments are being integrated into clinical practices today allowing clinicians to treat a broader range of patients' skin types and pathologies than in years past, with noteworthy outcomes. This article will discuss some emerging and developing resurfacing therapies and treatments that are present today and soon to be available.

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS SITED ON MILITARY BASES

EPA Science Inventory

The report gives results of an investigation into the pollutant emission reduction and demand-side management potential of three photovoltaic (PV) systems installed at Ft. Huachuca, AZ, Ft. Dix, NJ, and Hickam Air Force Base, HI, which began operation between January and July 199...

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

EPA Science Inventory

The report gives results of an investigation of the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The investigation was sponsored by the U.S. EPA and 11 electric utilities. The report ...

The Road Less Travelled

ERIC Educational Resources Information Center

Kewin, James

2011-01-01

Why are progression rates for Advanced Apprentices so low? Previous research points to a range of supply-side and demand-side barriers. Fundamentally, many employers do not exhibit the sort of demand for higher-level skills that could be used to justify the level of investment required. And, in some cases, employers just don't realise their…

New overlay measurement technique with an i-line stepper using embedded standard field image alignment marks for wafer bonding applications

NASA Astrophysics Data System (ADS)

Kulse, P.; Sasai, K.; Schulz, K.; Wietstruck, M.

2017-06-01

In the last decades the semiconductor technology has been driven by Moore's law leading to high performance CMOS technologies with feature sizes of less than 10 nm [1]. It has been pointed out that not only scaling but also the integration of novel components and technology modules into CMOS/BiCMOS technologies is becoming more attractive to realize smart and miniaturized systems [2]. Driven by new applications in the area of communication, health and automation, new components and technology modules such as BiCMOS embedded RF-MEMS, high-Q passives, Sibased microfluidics and InP-SiGe BiCMOS heterointegration have been demonstrated [3-6]. In contrast to standard VLSI processes fabricated on front side of the silicon wafer, these new technology modules require addition backside processing of the wafer; thus an accurate alignment between the front and backside of the wafer is mandatory. In previous work an advanced back to front side alignment technique and implementation into IHP's 0.25/0.13 μm high performance SiGe:C BiCMOS backside process module has been presented [7]. The developed technique enables a high resolution and accurate lithography on the backside of BiCMOS wafer for additional backside processing. In addition to the aforementioned back side process technologies, new applications like Through-Silicon Vias (TSV) for interposers and advanced substrate technologies for 3D heterogeneous integration demand not only single wafer fabrication but also processing of wafer stacks provided by temporary and permanent wafer bonding [8]. Therefore, the available overlay measurement techniques are not suitable if overlay and alignment marks are realized at the bonding interface of a wafer stack which consists of both a silicon device and a silicon carrier wafer. The former used EVG 40NT automated overlay measurement system, which use two opposite positioned microscopes inspecting simultaneous the wafer back and front side, is not capable measuring embedded overlay marks. In this work, the non-contact infrared alignment system of the Nikon i-line Stepper NSR-SF150 for both the alignment and the overlay determination of bonded wafer stacks with embedded alignment marks are used to achieve an accurate alignment between the different wafer sides. The embedded field image alignment (FIA) marks of the interface and the device wafer top layer are measured in a single measurement job. By taking the offsets between all different FIA's into account, after correcting the wafer rotation induced FIA position errors, hence an overlay for the stacked wafers can be determined. The developed approach has been validated by a standard back to front side application. The overlay was measured and determined using both, the EVG NT40 automated measurement system with special overlay marks and the measurement of the FIA marks of the front and back side layer. A comparison of both results shows mismatches in x and y translations smaller than 200 nm, which is relatively small compared to the overlay tolerances of +/-500 nm for the back to front side process. After the successful validation of the developed technique, special wafer stacks with FIA alignment marks in the bonding interface are fabricated. Due to the super IR light transparency of both doubled side polished wafers, the embedded FIA marks generate a stable and clear signal for accurate x and y wafer coordinate positioning. The FIA marks of the device wafer top layer were measured under standard condition in a developed photoresist mask without IR illumination. Following overlay calculation shows an overlay of less than 200 nm, which enables very accurate process condition for highly scaled TSV integration and advanced substrate integration into IHP's 0.25/0.13 μm SiGe:C BiCMOS technology. The presented method can be applied for both the standard back to front side process technologies and also new temporary and permanent wafer bonding applications.

Two-stage collaborative global optimization design model of the CHPG microgrid

NASA Astrophysics Data System (ADS)

Liao, Qingfen; Xu, Yeyan; Tang, Fei; Peng, Sicheng; Yang, Zheng

2017-06-01

With the continuous developing of technology and reducing of investment costs, renewable energy proportion in the power grid is becoming higher and higher because of the clean and environmental characteristics, which may need more larger-capacity energy storage devices, increasing the cost. A two-stage collaborative global optimization design model of the combined-heat-power-and-gas (abbreviated as CHPG) microgrid is proposed in this paper, to minimize the cost by using virtual storage without extending the existing storage system. P2G technology is used as virtual multi-energy storage in CHPG, which can coordinate the operation of electric energy network and natural gas network at the same time. Demand response is also one kind of good virtual storage, including economic guide for the DGs and heat pumps in demand side and priority scheduling of controllable loads. Two kinds of storage will coordinate to smooth the high-frequency fluctuations and low-frequency fluctuations of renewable energy respectively, and achieve a lower-cost operation scheme simultaneously. Finally, the feasibility and superiority of proposed design model is proved in a simulation of a CHPG microgrid.

Comparing policies to enhance prescribing efficiency in Europe through increasing generic utilization: changes seen and global implications.

PubMed

Godman, Brian; Shrank, William; Andersen, Morten; Berg, Christian; Bishop, Iain; Burkhardt, Thomas; Garuoliene, Kristina; Herholz, Harald; Joppi, Roberta; Kalaba, Marija; Laius, Ott; McGinn, Diane; Samaluk, Vita; Sermet, Catherine; Schwabe, Ulrich; Teixeira, Inês; Tilson, Lesley; Tulunay, F Cankat; Vlahović-Palčevski, Vera; Wendykowska, Kamila; Wettermark, Björn; Zara, Corinne; Gustafsson, Lars L

2010-12-01

The aim of this article was to evaluate the influence of different demand-side measures to enhance the prescribing of generics in ambulatory care based on cross-national comparisons. An observational retrospective study was conducted using administrative databases from across Europe, documenting changes in reimbursed utilization and expenditure of different proton pump inhibitors (PPIs) and statins between 2001 and 2007, alongside different reforms to enhance prescribing efficiency. Utilization was converted to defined daily doses (DDDs) and expenditures were converted to euros. Demand-side measures were collated under the '4 Es'--education, engineering, economics and enforcement--to enable comparisons on the nature and intensity of reforms between countries. There were considerable differences in the utilization of generics and patent-protected PPIs and statins among Western European countries. Decreased utilization of omeprazole and simvastatin, alongside increased utilization of esomeprazole, atorvastatin and rosuvastatin, was seen in countries with limited demand-side measures to counteract commercial pressures. Prescribing restrictions, or a combination of education, prescribing targets and financial incentives, had the greatest influence on enhancing the utilization of omeprazole and simvastatin. For example, there was a threefold reduction in the utilization of atorvastatin in Austria following prescribing restrictions. Multiple demand-side interventions generally had a greater influence than single interventions, with the impact appearing additive. Multiple interventions coupled with initiatives to lower prices of generics considerably enhanced prescribing efficiency. This cross-national study has demonstrated considerable variation in the utilization and expenditure of PPIs and statins across Europe, providing opportunities to further improve prescribing efficiency. The '4 Es' do provide an understandable methodology to document and compare the influence of different demand-side measures, with the influence varying by their extent and intensity. Further reforms are essential given current financial pressures. Consequently, further research will concentrate on the potential to develop a scoring system to help predict the possible impact of different demand-side measures on future utilization patterns.

Strategies to increase demand for maternal health services in resource-limited settings: challenges to be addressed.

PubMed

Elmusharaf, Khalifa; Byrne, Elaine; O'Donovan, Diarmuid

2015-09-08

Universal health access will not be achieved unless women are cared for in their own communities and are empowered to take decisions about their own health in a supportive environment. This will only be achieved by community-based demand side interventions for maternal health access. In this review article, we highlight three common strategies to increase demand-side barriers to maternal healthcare access and identify the main challenges that still need to be addressed for these strategies to be effective. Common demand side strategies can be grouped into three categories:(i) Financial incentives/subsidies; (ii) Enhancing patient transfer, and; (iii) Community involvement. The main challenges in assessing the effectiveness or efficacy of these interventions or strategies are the lack of quality evidence on their outcome and impact and interventions not integrated into existing health or community systems. However, what is highlighted in this review and overlooked in most of the published literature on this topic is the lack of knowledge about the context in which these strategies are to be implemented. We suggest three challenges that need to be addressed to create a supportive environment in which these demand-side strategies can effectively improve access to maternal health services. These include: addressing decision-making norms, engaging in intergenerational dialogue, and designing contextually appropriate communication strategies.

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santarius, Tilman, E-mail: tilman@santarius.de

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects,more » i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.« less

I-line stepper based overlay evaluation method for wafer bonding applications

NASA Astrophysics Data System (ADS)

Kulse, P.; Sasai, K.; Schulz, K.; Wietstruck, M.

2018-03-01

In the last decades the semiconductor technology has been driven by Moore's law leading to high performance CMOS technologies with feature sizes of less than 10 nm [1]. It has been pointed out that not only scaling but also the integration of novel components and technology modules into CMOS/BiCMOS technologies is becoming more attractive to realize smart and miniaturized systems [2]. Driven by new applications in the area of communication, health and automation, new components and technology modules such as BiCMOS embedded RF-MEMS, high-Q passives, Sibased microfluidics and InP-SiGe BiCMOS heterointegration have been demonstrated [3-6]. In contrast to standard VLSI processes fabricated on front side of the silicon wafer, these new technology modules additionally require to process the backside of the wafer; thus require an accurate alignment between the front and backside of the wafer. In previous work an advanced back to front side alignment technique and implementation into IHP's 0.25/0.13 µm high performance SiGe:C BiCMOS backside process module has been presented [7]. The developed technique enables a high resolution and accurate lithography on the backside of BiCMOS wafer for additional backside processing. In addition to the aforementioned back side process technologies, new applications like Through-Silicon Vias (TSV) for interposers and advanced substrate technologies for 3D heterogeneous integration demand not only single wafer fabrication but also processing of wafer stacks provided by temporary and permanent wafer bonding [8-9]. In this work, the non-contact infrared alignment system of the Nikon® i-line Stepper NSR-SF150 for both alignment and the overlay determination of bonded wafer stacks with embedded alignment marks are used to achieve an accurate alignment between the different wafer sides. The embedded field image alignment (FIA) marks of the interface and the device wafer top layer are measured in a single measurement job. By taking the offsets between all different FIA's into account, after correcting the wafer rotation induced FIA position errors, hence an overlay for the stacked wafers can be determined. The developed approach has been validated by a standard front side resist in resist experiment. After the successful validation of the developed technique, special wafer stacks with FIA alignment marks in the bonding interface are fabricated and exposed. Following overlay calculation shows an overlay of less than 200 nm, which enables very accurate process condition for highly scaled TSV integration and advanced substrate integration into IHP's 0.25/0.13 µm SiGe:C BiCMOS technology. The developed technique also allows using significantly smaller alignment marks (i.e. standard FIA alignment marks). Furthermore, the presented method is used, in case of wafer bow related overlay tool problems, for the overlay evaluation of the last two metal layers from production wafers prepared in IHP's standard 0.25/0.13 µm SiGe:C BiCMOS technology. In conclusion, the exposure and measurement job can be done with the same tool, minimizing the back to front side/interface top layer misalignment which leads to a significant device performance improvement of backside/TSV integrated components and technologies.

Assessment of desalination technologies for treatment of a highly saline brine from a potential CO 2 storage site

DOE PAGES

Kaplan, Ruth; Mamrosh, Darryl; Salih, Hafiz H.; ...

2016-11-12

Brine extraction is a promising strategy for the management of increased reservoir pressure, resulting from carbon dioxide (CO 2) injection in deep saline reservoirs. The extracted brines usually have high concentrations of total dissolved solids (TDS) and various contaminants, and require proper disposal or treatment. In this article, first by conducting a critical review, we evaluate the applicability, limits, and advantages or challenges of various commercially available and emerging desalination technologies that can potentially be employed to treat the highly saline brine (with TDS values >70.000 ppm) and those that are applicable to a ~200,000 ppm TDS brine extracted frommore » the Mt. Simon Sandstone, a potential CO 2 storage site in Illinois, USA. Based on the side-by-side comparison of technologies, evaporators are selected as the most suitable existing technology for treating Mt. Simon brine. Process simulations are then conducted for a conceptual design for desalination of 454 m 3/h (2000 gpm) pretreated brine for near-zero liquid discharge by multi-effect evaporators. In conclusion, the thermal energy demand is estimated at 246kWh perm 3 of recoveredwater, ofwhich 212kWh/m 3 is required for multiple-effect evaporation and the remainder for salt drying. The process also requires additional electrical power of ~2 kWh/m 3.« less

Decentralisation de l'enseignement: Financements Axes sur la Demande. Le Developpement en Marche. (Decentralization of Education. Demand Side Financing. Directions in Development.)

ERIC Educational Resources Information Center

Patrinos, Harry Anthony; Ariasingam, David Lakshmanan

Central governments' supply-side expansions of schooling have not equally benefited all members of society, especially girls, indigenous peoples, tribal groups, disadvantaged minorities, and the poor. Public spending on education is often inefficient, higher education is subsidized at primary education's expense, and costs are becoming…

Accurate Estimation of Target amounts Using Expanded BASS Model for Demand-Side Management

NASA Astrophysics Data System (ADS)

Kim, Hyun-Woong; Park, Jong-Jin; Kim, Jin-O.

2008-10-01

The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM (Supply-Side Management) but also DSM (Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically expanded Bass model considering rebates, which have influence on penetration amounts for DSM program. To reflect rebate effect more preciously, the pricing function using in expanded Bass model directly reflects response of potential participants for rebate level.

Optimal Drug Policy in Low-Income Neighborhoods

PubMed Central

Chang, Sheng-Wen; Coulson, N. Edward; Wang, Ping

2015-01-01

The control of drug activity currently favors supply-side policies: drug suppliers in the U.S. face a higher arrest rate and longer sentences than demanders. We construct a simple model of drug activity with search and entry frictions in labor and drug markets. Our calibration analysis suggests a strong “dealer replacement effect.” As a result, given a variety of community objectives, it is beneficial to lower supplier arrests and raise the demand arrest rate from current values. A 10% shift from supply-side to demand-side arrests can reduce the population of potential drug dealers by 22–25,000 and raise aggregate local income by $380–400 million, at 2002 prices. (JEL Classification: D60, J60, K42, H70) PMID:27616878

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaplan, Ruth; Mamrosh, Darryl; Salih, Hafiz H.

Brine extraction is a promising strategy for the management of increased reservoir pressure, resulting from carbon dioxide (CO 2) injection in deep saline reservoirs. The extracted brines usually have high concentrations of total dissolved solids (TDS) and various contaminants, and require proper disposal or treatment. In this article, first by conducting a critical review, we evaluate the applicability, limits, and advantages or challenges of various commercially available and emerging desalination technologies that can potentially be employed to treat the highly saline brine (with TDS values >70.000 ppm) and those that are applicable to a ~200,000 ppm TDS brine extracted frommore » the Mt. Simon Sandstone, a potential CO 2 storage site in Illinois, USA. Based on the side-by-side comparison of technologies, evaporators are selected as the most suitable existing technology for treating Mt. Simon brine. Process simulations are then conducted for a conceptual design for desalination of 454 m 3/h (2000 gpm) pretreated brine for near-zero liquid discharge by multi-effect evaporators. In conclusion, the thermal energy demand is estimated at 246kWh perm 3 of recoveredwater, ofwhich 212kWh/m 3 is required for multiple-effect evaporation and the remainder for salt drying. The process also requires additional electrical power of ~2 kWh/m 3.« less

How to optimize tourism destination supply: A case in Shanghai from perspective of supplier and demand side perception

NASA Astrophysics Data System (ADS)

Xue, Huaju; Fang, Chengjiang

2018-02-01

It is vital to assess the regional tourist supply capability by suppliers and demand groups. The supply side’s evaluation of the regional supply capacity determines the direction of the supply investment in future, the demand side’s evaluation indicates their satisfaction degree of the destination supply and also effects their revisit the tourism destination. Therefore, the assessment of the supply and demand sides is an important reference for the reform of destination supply side, which helps us find the shortage of the destination supply factors and optimize tourism destination supply promptly. This paper through investigating tourism supply and demand groups in Shanghai, used the survey data and constructed tourism supply optimization model, analyzed the current situation of tourism supply factors in Shanghai. Results showed that the environment of Shanghai should be improved first, including improving urban air and water quality, up-grading public sanitation and increasing urban green coverage. Other supply factors improved priority were information and marketing, we should improve the information consultation of scenic spots, increase the intensity of tourism promotion and provide more free travel publicity brochures.

Next-Generation Performance-Based Regulation: Emphasizing Utility Performance to Unleash Power Sector Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Jeffrey S; Zinaman, Owen R; Littell, David

Performance-based regulation (PBR) enables regulators to reform hundred-year-old regulatory structures to unleash innovations within 21st century power systems. An old regulatory paradigm built to ensure safe and reliable electricity at reasonable prices from capital-intensive electricity monopolies is now adjusting to a new century of disruptive technological advances that change the way utilities make money and what value customers expect from their own electricity company. Advanced technologies are driving change in power sectors around the globe. Innovative technologies are transforming the way electricity is generated, delivered, and consumed. These emerging technology drivers include renewable generation, distributed energy resources such as distributedmore » generation and energy storage, demand-side management measures such as demand-response, electric vehicles, and smart grid technologies and energy efficiency (EE). PBR enables regulators to recognize the value that electric utilities bring to customers by enabling these advanced technologies and integrating smart solutions into the utility grid and utility operations. These changes in the electric energy system and customer capacities means that there is an increasing interest in motivating regulated entities in other areas beyond traditional cost-of-service performance regulation. This report addresses best practices gleaned from more than two decades of PBR in practice, and analyzes how those best practices and lessons can be used to design innovative PBR programs. Readers looking for an introduction to PBR may want to focus on Chapters 1-5. Chapters 6 and 7 contain more detail for those interested in the intricate workings of PBR or particularly innovative PBR.« less

Navy Omni-Directional Vehicle (ODV) development program

NASA Technical Reports Server (NTRS)

Mcgowen, Hillery

1994-01-01

The Omni-Directional Vehicle (ODV) development program sponsored by the Office of Naval Research at the Coastal Systems Station has investigated the application of ODV technology for use in the Navy shipboard environment. ODV technology as originally received by the Navy in the form of the Cadillac-Gage Side Mover Vehicle was applicable to the shipboard environment with the potential to overcome conditions of reduced traction, ship motion, decks heeled at high angles, obstacles, and confined spaces. Under the Navy program, ODV technology was investigated and a series of experimental vehicles were built and successfully tested under extremely demanding conditions. The ODV drive system has been found to be applicable to autonomous, remotely, or manually operated vehicles. Potential commercial applications include multi-directional forklift trucks, automatic guided vehicles employed in manufacturing environments, and remotely controlled platforms used in nuclear facilities or for hazardous waste clean up tasks.

Navy Omni-Directional Vehicle (ODV) development program

NASA Astrophysics Data System (ADS)

McGowen, Hillery

1994-02-01

The Omni-Directional Vehicle (ODV) development program sponsored by the Office of Naval Research at the Coastal Systems Station has investigated the application of ODV technology for use in the Navy shipboard environment. ODV technology as originally received by the Navy in the form of the Cadillac-Gage Side Mover Vehicle was applicable to the shipboard environment with the potential to overcome conditions of reduced traction, ship motion, decks heeled at high angles, obstacles, and confined spaces. Under the Navy program, ODV technology was investigated and a series of experimental vehicles were built and successfully tested under extremely demanding conditions. The ODV drive system has been found to be applicable to autonomous, remotely, or manually operated vehicles. Potential commercial applications include multi-directional forklift trucks, automatic guided vehicles employed in manufacturing environments, and remotely controlled platforms used in nuclear facilities or for hazardous waste clean up tasks.

The macroeconomics of demographic unemployment.

PubMed

Carlberg, M

1990-02-01

"What are the macroeconomic consequences of an increase in labour supply? In the short run, unemployment occurs, due to both lack of aggregate demand and capital shortage. Demand-side policy and money wage restraint prove to be ineffective in this situation, owing to capital shortage. On the other hand, a reduction in working hours without wage compensation as well as a policy mix of both demand-side policy and investment policy turn out to be effective. The reduction in working hours lowers individual income and raises individual leisure, as compared to the policy mix." (SUMMARY IN GER) excerpt

Demand-Side Financing--A Focus on Vouchers in Post-Compulsory Education and Training: Discussion Paper and Case Studies. CEDEFOP Dossier.

ERIC Educational Resources Information Center

West, Anne; Sparkes, Jo; Balabanov, Todor

The use of demand-side financing mechanisms and vouchers for postcompulsory secondary-level education was examined through case studies of funding practices in the following countries: Austria; France; the United Kingdom; the United States; and Wallonia (the French community of Belgium). Different models of voucher use were identified in the…

Creating a High-Skills Society during Recession: Issues for Policy Makers

ERIC Educational Resources Information Center

Panagiotakopoulos, Antonios

2015-01-01

The present study looks at the skill formation policies adopted by policy makers in Greece in order to create a high-skills society. It examines empirically the demand side of the skill creation process within 300 small enterprises in order to understand how far supply-side measures have influenced the demand for well-trained staff within small…

Demand-Side Financing in Education: a Critical Examination of a Girls' Scholarship Program in Malawi--(Case Study)

ERIC Educational Resources Information Center

Sineta, Abraham

2012-01-01

Despite the push for universal education, many disadvantaged and poor children in developing countries still do not have access to basic education. This among other reasons is due to poverty where poor families cannot afford the cost of basic education even when it is "free" of tuition (McDonald, 2007). Demand-side financing…

Demand-Side Management and Integrated Resource Planning: Findings from a Survey of 24 Electric Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schweitzer, M.

1991-01-01

Integrated resource planning differs from traditional utility planning practices primarily in its increased attention to demand-side management (DSM) programs and its integration of supply- and demand-side resources into a combined resource portfolio. This report details the findings from an Oak Ridge National Laboratory (ORNL) survey of 24 electric utilities that have well-developed integrated planning processes. These utilities account for roughly one-third of total capacity, electricity generation, and DSM-program expenditures nationwide. The ORNL survey was designed to obtain descriptive data on a national sample of utilities and to test a number of hypothesized relationships between selected utility characteristics and the mixmore » of resources selected for the integrated plan, with an emphasis on the use of DSM resources and the processes by which they are chosen. The survey solicited information on each utility's current and projected resource mix, operating environment, procedures used to screen potential DSM resources, techniques used to obtain public input and to integrate supply- and demand-side options into a unified plan, and procedures used in the final selection of resources for the plan.« less

Electron trapping optical data storage system and applications

NASA Technical Reports Server (NTRS)

Brower, Daniel; Earman, Allen; Chaffin, M. H.

1993-01-01

A new technology developed at Optex Corporation out-performs all other existing data storage technologies. The Electron Trapping Optical Memory (ETOM) media stores 14 gigabytes of uncompressed data on a single, double-sided 130 mm disk with a data transfer rate of up to 120 megabits per second. The disk is removable, compact, lightweight, environmentally stable, and robust. Since the Write/Read/Erase (W/R/E) processes are carried out photonically, no heating of the recording media is required. Therefore, the storage media suffers no deleterious effects from repeated W/R/E cycling. This rewritable data storage technology has been developed for use as a basis for numerous data storage products. Industries that can benefit from the ETOM data storage technologies include: satellite data and information systems, broadcasting, video distribution, image processing and enhancement, and telecommunications. Products developed for these industries are well suited for the demanding store-and-forward buffer systems, data storage, and digital video systems needed for these applications.

Utility Sector Impacts of Reduced Electricity Demand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coughlin, Katie

2014-12-01

This report presents a new approach to estimating the marginal utility sector impacts associated with electricity demand reductions. The method uses publicly available data and provides results in the form of time series of impact factors. The input data are taken from the Energy Information Agency's Annual Energy Outlook (AEO) projections of how the electric system might evolve in the reference case, and in a number of side cases that incorporate different effciency and other policy assumptions. The data published with the AEO are used to define quantitative relationships between demand-side electricity reductions by end use and supply-side changes tomore » capacity by plant type, generation by fuel type and emissions of CO2, Hg, NOx and SO2. The impact factors define the change in each of these quantities per unit reduction in site electricity demand. We find that the relative variation in these impacts by end use is small, but the time variation can be significant.« less

Lessons from the other side: what can we learn from the private sector?

PubMed

Clarke, D

1999-01-01

Business has reacted in an impressive manner to increasing globalisation, short-term stock market pressure for performance, emerging industries and new technologies. While the private sector has become increasingly competitive, the public sector has not adopted this commercial rigour. Funding pressures on health services will continue, as will increasing consumer and staff demands and the blurring of public and private health care provision. As a result, there are lessons and techniques the public and private health sectors should learn from each other. I have drawn the issues that follow from my experience in the steel and food industries.

Cannabis Supply and Demand Reduction: Evidence from the ESPAD Study of Adolescents in 31 European Countries

ERIC Educational Resources Information Center

Bjarnason, Thoroddur; Steriu, Andreea; Kokkevi, Anna

2010-01-01

Aims: Most national drug policies target both the supply side and the demand side of illicit drug use. Although such policies are intended to affect individual choices, they by definition operate on a national level and cannot be evaluated solely on the basis of individual-level differences. This study aims to evaluate the impact of country-level…

The Black-White Difference in Youth Employment: Evidence for Demand-Side Factors.

ERIC Educational Resources Information Center

Cain, Glen G.; Finnie, Ross

The 1980 Census of the United States is used, first, to illustrate the serious lag in employment performance of young black men relative to young white men and, second, to test for the importance of demand-side causes of this lag. Aggregate data for 94 standard metropolitan statistical areas (SMSAs) contain data on the annual hours worked in 1979…

Finite Element Modelling Full Vehicle Side Impact with Ultrahigh Strength Hot Stamped Steels

NASA Astrophysics Data System (ADS)

Taylor, T.; Fourlaris, G.; Cafolla, J.

2016-10-01

"Hot stamped boron steel" 22MnB5 has been imperative in meeting the automotive industry's demand for materials exhibiting higher tensile strength in the final component. In this paper, the crash performance of three experimental grades developed for automotive hot stamping technologies, exhibiting wider tensile property ranges than 22MnB5, was validated by finite element modelling full vehicle side impact with the experimental material data applied to the B-pillar reinforcement. The superior anti-intrusive crash performance of grade 38MnB5 was demonstrated, with 11 mm less intrusion of the B-pillar reinforcement compared to 22MnB5. Moreover, the superior "impact-energy absorptive" crash performance of grade 15MnCr5 was demonstrated, with 0.15 kJ greater impact-energy absorption by the B-pillar reinforcement compared to 22MnB5.

Roadmap of optical communications

NASA Astrophysics Data System (ADS)

Agrell, Erik; Karlsson, Magnus; Chraplyvy, A. R.; Richardson, David J.; Krummrich, Peter M.; Winzer, Peter; Roberts, Kim; Fischer, Johannes Karl; Savory, Seb J.; Eggleton, Benjamin J.; Secondini, Marco; Kschischang, Frank R.; Lord, Andrew; Prat, Josep; Tomkos, Ioannis; Bowers, John E.; Srinivasan, Sudha; Brandt-Pearce, Maïté; Gisin, Nicolas

2016-06-01

Lightwave communications is a necessity for the information age. Optical links provide enormous bandwidth, and the optical fiber is the only medium that can meet the modern society's needs for transporting massive amounts of data over long distances. Applications range from global high-capacity networks, which constitute the backbone of the internet, to the massively parallel interconnects that provide data connectivity inside datacenters and supercomputers. Optical communications is a diverse and rapidly changing field, where experts in photonics, communications, electronics, and signal processing work side by side to meet the ever-increasing demands for higher capacity, lower cost, and lower energy consumption, while adapting the system design to novel services and technologies. Due to the interdisciplinary nature of this rich research field, Journal of Optics has invited 16 researchers, each a world-leading expert in their respective subfields, to contribute a section to this invited review article, summarizing their views on state-of-the-art and future developments in optical communications.

Induced innovation, energy prices, and the environment

NASA Astrophysics Data System (ADS)

Popp, David Clifford

The process of developing new technologies is a central question for economic theory as well as for public policy in many areas. For example, the development of cleaner, more efficient energy technologies will play an important role in reducing the threat of global warming. To study how technology evolves over time, this dissertation uses patent data on energy innovations from 1970 to 1991 to examine the impact of energy prices on energy-efficient innovations. Before this can be done, however, information on supply-side factors which influence innovation is also needed. In the case of innovation, supply-side factors are the usefulness of the existing base of scientific knowledge. Patent citations are used for this purpose. Subsequent citations to patents granted each year since 1970 are used to show that the returns to research and development (R&D) fall over time for most of the technologies studied. These estimates are then combined with data on demand-side factors, such as energy prices, to estimate a model of induced innovation in energy technologies. Both energy prices and the supply of knowledge are found to have strongly significant positive effects on innovation. Next, the Yale Technology Concordance (YTC), which maps patents to the industries in which they are used, is employed to construct a stock of energy-related knowledge for 14 energy intensive industries. The effect of changes in this stock on energy consumption in these industries is estimated. On average, the present value of energy savings resulting from a new patent is eight million dollars, with the maximum savings coming about five years after the initial patent application. Finally, the results of each regression are combined to simulate the impact of a ten percent energy tax. Initially, simple factor substitution due to the price change has the largest effect. However, because of the cumulative nature of R&D, induced innovation has a much larger effect than factor substitution in the long run. The evidence in this dissertation suggests that prices play an important role in influencing technological change, and that policy-makers can use this to their advantage in designing appropriate environmental policies.

Impact of reproductive technologies on dairy food production in the dairy industry.

PubMed

Stevenson, Jeffrey S

2014-01-01

Reproductive technologies drive the efficiency of managing dairy cows because the lactation cycle of the dairy cow depends on regular calving to renew lactation yields. Achieving timely pregnancies to allow calving every 12-14 months, therefore, is critical in modern dairy production. To meet the demands to produce sufficient milk for fluid and dairy products, various technologies are applied to enhance efficiencies on the dairy farm. Artificial insemination (AI), embryo transfer, ultrasonographic and chemical detection of pregnancy, various monitors that detect or predict estrus, and handheld communication and testing devices allow managers to retrieve information to make cow-side decisions about health and reproductive status. Genomic testing of young potential sires or young heifers is now possible and can provide information about their genetic merit years before any progeny tests can be completed. In many countries, the challenge faced by dairy producers is their ability to afford these technologies in the face of rising feed and labor costs and volatile milk prices received at the farm gate. Government policies often place obstacles, trade barriers, and unfunded mandates that preclude operations from making a modest profit. Unlike nearly all other manufacturing industries, agriculture producers have little control over the price received for their products. Therefore, dairy production is vulnerable to many uncontrolled factors including climate, government policy, economic conditions, and skilled labor shortages. It is clear that the impact of emerging and current reproductive technologies is critical to the management of dairy cattle to produce sufficient milk to meet consumer demands for quality fluid and dairy products.

Economic concepts to address future water supply-demand imbalances in Iran, Morocco and Saudi Arabia

NASA Astrophysics Data System (ADS)

Hellegers, Petra; Immerzeel, Walter; Droogers, Peter

2013-10-01

In Middle East and North Africa (MENA) countries, renewable groundwater and surface water supply are limited while demand for water is growing rapidly. Climate change is expected to increase water demand even further. The main aim of this paper is to evaluate the water supply-demand imbalances in Iran, Morocco and Saudi Arabia in 2040-2050 under dry, average and wet climate change projections and to show on the basis of the marginal cost and marginal value of water the optimum mix of supply-side and demand-side adjustments to address the imbalance. A hydrological model has been used to estimate the water supply-demand imbalance. Water supply and demand curves have been used to explore for which (marginal value of) water usage the marginal cost of supply-enhancement becomes too expensive. The results indicate that in the future in all cases, except in Iran under the wet climate projection, the quantity of water demanded has to be reduced considerably to address the imbalance, which is indeed what is currently happening already.

Universities Response to Oil and Gas Industry Demands in South Texas (USA) and Tamaulipas (Mexico)

ERIC Educational Resources Information Center

Navarro, Marco Aurelio

2016-01-01

Given the importance of hydrocarbons for this area, the purpose of this paper is to explore the response of universities to cope with new demands in the south of Texas and Tamaulipas, especially in relation to gas plays of Eagle Ford (Texas side) and Burgos Basin (Mexican side). To accomplish this task, in the first section of the paper a broad…

An Economic Evalution of Demand-side Energy Storage Systems by using a Multi-agent based Electricity Market

NASA Astrophysics Data System (ADS)

Furusawa, Ken; Sugihara, Hideharu; Tsuji, Kiichiro

Opened wholesale electric power market in April 2005, deregulation of electric power industry in Japan has faced a new competitive environment. In the new environment, Independent Power Producer (: IPP), Power Producer and Supplier (: PPS), Load Service Entity (: LSE) and electric utility can trade electric energy through both bilateral contracts and single-price auction at the electricity market. In general, the market clearing price (: MCP) is largely changed by amount of total load demand in the market. The influence may cause price spike, and consequently the volatility of MCP will make LSEs and their customers to face a risk of revenue and cost. DSM is attracted as a means of load leveling, and has effect on decreasing MCP at peak load period. Introducing Energy Storage systems (: ES) is one of DSM in order to change demand profile at customer-side. In case that customers decrease their own demand at jumped MCP, a bidding strategy of generating companies may be changed their strategy. As a result, MCP is changed through such complex mechanism. In this paper the authors evaluate MCP by multi-agent. It is considered that customer-side ES has an effect on MCP fluctuation. Through numerical examples, this paper evaluates the influence on MCP by controlling customer-side ES corresponding to variation of MCP.

Game Demands of Seven-A-Side Soccer in Young Players.

PubMed

Barbero-Alvarez, José C; Gómez-López, Maite; Castagna, Carlo; Barbero-Alvarez, Verónica; Romero, David V; Blanchfield, Anthony W; Nakamura, Fábio Y

2017-07-01

Barbero-Alvarez, JC, Gómez-López, M, Castagna, C, Barbero-Alvarez, V, Romero, DV, Blanchfield, AW, and Nakamura, FY. Game demands of seven-a-side soccer in young players. J Strength Cond Res 31(7): 1771-1779, 2017-The aim of this study was to examine the activity patterns and physiological demands of 7-a-side youth soccer matches across 2 chronological age categories (U12 and U14). Twenty-two soccer players of a national youth soccer academy were investigated. Players of each age category performed 2 training matches (2 × 25 minutes) and were monitored by global positioning system and heart rate monitor units. Players of both categories covered similar total distance (5,348 ± 307 m), at similar mean heart rate values (86 ± 4% of maximum). However, the number of high-intensity runs (82.5 ± 17.4 vs. 69.7 ± 15.2) and total distance covered during sprints (264 ± 207 vs. 128 ± 74 m) were significantly (p ≤ 0.05) higher in U14 compared with U12. The results suggest a highly demanding nature of 7-a-side soccer for skilled players, with physical maturity possibly influencing the match-related high-intensity performance at these ages.

[Understanding chair-side digital technology for stomatology from an engineering viewpoint].

PubMed

Zhao, Y J; Wang, Y

2018-04-09

In recent years with the rapid development of digital technology for stomatology, the application field, application model, technical features and technical connotation of the chair-side digital technology has got development and change. The open modular system has gradually replaced the traditional closed system, and the application field of digital technology is no longer limited to chair-side dental restoration, it also has been extend to various kinds of chair-side digital treatment-assisted technology. In this paper, from the engineering point of view, the up to date general connotation of chair-side digital technology was explained, the characteristics and the development of each unit in chair-side digital technology were analyzed, and the application pattern and the localization status were also discussed in this paper. The aim of this paper was to introduce the trend of chair-side digital technological to readers and to better guide clinical application.

Manufacturability study of masks created by inverse lithography technology (ILT)

NASA Astrophysics Data System (ADS)

Martin, Patrick M.; Progler, C. J.; Xiao, G.; Gray, R.; Pang, L.; Liu, Y.

2005-11-01

As photolithography is pushed to fabricate deep-sub wavelength devices for 90nm, 65nm and smaller technology nodes using available exposure tools (i.e., 248nm, 193nm steppers), photomask capability is becoming extremely critical. For example, PSM masks require more complicated processing; aggressive OPC makes the writing time longer and sometimes unpredictable; and, high MEEF imposes much more stringent demands on mask quality. Therefore, in order for any new lithography technology to be adopted into production, mask manufacturability must be studied thoroughly and carefully. In this paper we will present the mask manufacturability study on mask patterns created using Inverse Lithography Technology (ILT). Unlike conventional OPC methodologies, ILT uses a unique outcome-based technology to mathematically determine the mask features that produce the desired on-wafer results. ILT solves the most critical litho challenges of the deep sub-wavelength era. Potential benefits include: higher yield; expanded litho process windows; superb pattern fidelity at 90, 65 & 45-nm nodes; and reduced time-to-silicon - all without changing the existing lithography infrastructure and design-to-silicon flow. In this study a number of cell structures were selected and used as test patterns. "Luminized patterns" were generated for binary mask and attenuated phase-shift mask. Both conventional OPC patterns and "luminized patterns" were put on a test reticle side by side, and they all have a number of variations in term of correction aggressivity level and mask complexity. Mask manufacturability, including data fracturing, writing time, mask inspection, and metrology were studied. The results demonstrate that, by optimizing the inspection recipe, masks created using ILT technology can be made and qualified using current processes with a reasonable turn-around time.

Sustainable water services and interaction with water resources in Europe and in Brazil

NASA Astrophysics Data System (ADS)

Barraqué, B.; Formiga Johnsson, R. M.; Britto, A. L.

2007-09-01

The increasing interaction between large cities and nature makes "urban water" an issue: water resources and water services - including public water supply, sewage collection and treatment, and in large cities, storm water control -, which had become separate issues thanks to the process of water transport and treatment technologies, are now increasingly interfering with each other. We cannot take nature for granted anymore, and we need to protect water resources, if only to reduce the long term cost of transporting and treating water. In this paper, we compare the historical development of water industry technologies in European and Brazilian metropolitan areas, in their socio-economic and political context, tracing it through three "ages" of water technology and services which developed under civil engineering, sanitary engineering, and environmental engineering perspectives: the "quantity of water" and civil engineering paradigm was developed on the assumption that water should be drawn from natural environments far from the cities; in the "water quality" and chemical/sanitation engineering paradigm, water treatment was invented and allowed cities to take water from rivers closer to them and treat it, but also to reduce sewer discharge impacts; finally, the environmental engineering paradigm proposes to overcome the supply side perspective, by introducing demand side management, water conservation, water allocation flexibilisation, and an integrated approach to water services, water resources management, and land use policies.

75 FR 59674 - Make Inoperative Exemptions; Vehicle Modifications To Accommodate People With Disabilities, Side...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... that many vehicles will depend on side impact air bag technology to meet all of the injury criteria of... ``lead to the installation of new technologies, such as side curtain air bags and torso side air bags... is side air bag technology incorporated in the vehicle's roof rail (side air bag curtain), door, and...

Supply and demand: negotiating the prescription drug labyrinth to reduce costs.

PubMed

DeStefino, Kevin

2003-01-01

Prescription drug costs are increasing at a rate of 15% to 17% a year and a look into the future does not bring much better news. Employers can expect to see more numbers like these as doctors more aggressively treat diseases using drug therapy, the population continues to age and pharmaceutical companies continue to spend billions of dollars on direct-to-consumer advertising aimed at consumers who are desensitized to the true costs of their prescriptions. In this environment, it is unlikely that companies can realistically expect to reverse costs of even to avoid cost increases. However, this article provides employers with a prudent approach to managing both the supply and demand sides of the prescription drug equation in order to reduce their level of increase. Supply-side management focuses on negotiations with vendors, while the demand side focuses on managing employee utilization.

Urban development control based on transportation carrying capacity

NASA Astrophysics Data System (ADS)

Miharja, M.; Sjafruddin, A. H.

2017-06-01

Severe transportation problems in Indonesian urban areas are stimulated by one fundamental factor, namely lack of awareness on transportation carrying capacity in these areas development control. Urban land use development towards more physical coverage is typically not related with the capability of transportation system to accommodate additional trips volume. Lack of clear connection between development permit with its implication on the transportation side has led to a phenomenon of exceeding transport demand over supply capacity. This paper discusses the concept of urban land use development control which will be related with transport carrying capacity. The discussion would cover both supply and demand sides of transportation. From supply side, the analysis regarding the capacity of transport system would take both existing as well as potential road network capacity could be developed. From demand side, the analysis would be through the control of a maximum floor area and public transport provision. Allowed maximum floor area for development would be at the level of generating traffic at reasonable volume. Ultimately, the objective of this paper is to introduce model to incorporate transport carrying capacity in Indonesian urban land use development control.

Industrious peasants in east and west: markets, technology, and family structure in Japanese and Western European agriculture.

PubMed

De Vries, Jan

2011-01-01

Jan de Vries engages with Osamu Saito's discussion of Tokugawa Japan, in particular, his exploration of de Vries's concept of an industrious revolution for East Asia, which was published in this journal in 2010. The discussion bears on the ongoing debate over the timing and character of the Great Divergence, when advanced parts of Europe pulled ahead of Asia. de Vries argues that the constraint on the Japanese rural household to acquire and shed labour delayed the shift from supply-side industriousness to demand-motivated industriousness, which in turn meant that the Great Divergence was already in place before 1800.

Dedicated bifurcation stents

PubMed Central

Pillai, Ajith Ananthakrishna; Jayaraman, Balachander

2012-01-01

Bifurcation percutaneous coronary intervention (PCI) is still a difficult call for the interventionist despite advancements in the instrumentation, technical skill and the imaging modalities. With major cardiac events relate to the side-branch (SB) compromise, the concept and practice of dedicated bifurcation stents seems exciting. Several designs of such dedicated stents are currently undergoing trials. This novel concept and pristine technology offers new hope notwithstanding the fact that we need to go a long way in widespread acceptance and practice of these gadgets. Some of these designs even though looks enterprising, the mere complex delivering technique and the demanding knowledge of the exact coronary anatomy makes their routine use challenging. PMID:22572498

A novel framework for analysing stakeholder interest in healthy foods: A case study on iodine biofortification.

PubMed

Mogendi, Joseph Birundu; De Steur, Hans; Gellynck, Xavier; Makokha, Anselimo

2016-01-01

Despite the availability of novel strategies to prevent micronutrient malnutrition, such as biofortification, limited understanding of stakeholders often hampers their success. We build upon the existing literature on protection motivations (PMT) and technology acceptance (TAM) to develop an integrated PMTAM model for analyzing stakeholders' reactions, on both the supply and demand sides. Regarding the latter, the case of the iodine biofortified food chain is used to evaluate African households' interest. All model constructs, and threat appraisal in particular, are decisive in determining the uptake of biofortification, while also social demographics and own nutrition status play an important role.

Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

NASA Astrophysics Data System (ADS)

Berardino, Jonathan

In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

Virtual atmospheric mercury emission network in China.

PubMed

Liang, Sai; Zhang, Chao; Wang, Yafei; Xu, Ming; Liu, Weidong

2014-01-01

Top-down analysis of virtual atmospheric mercury emission networks can direct efficient demand-side policy making on mercury reductions. Taking China-the world's top atmospheric mercury emitter-as a case, we identify key contributors to China's atmospheric mercury emissions from both the producer and the consumer perspectives. China totally discharged 794.9 tonnes of atmospheric mercury emissions in 2007. China's production-side control policies should mainly focus on key direct mercury emitters such as Liaoning, Hebei, Shandong, Shanxi, Henan, Hunan, Guizhou, Yunnan, and Inner Mongolia provinces and sectors producing metals, nonmetallic mineral products, and electricity and heat power, while demand-side policies should mainly focus on key underlying drivers of mercury emissions such as Shandong, Jiangsu, Zhejiang, and Guangdong provinces and sectors of construction activities and equipment manufacturing. China's interregional embodied atmospheric mercury flows are generally moving from the inland to the east coast. Beijing-Tianjin (with 4.8 tonnes of net mercury inflows) and South Coast (with 3.3 tonnes of net mercury inflows) are two largest net-inflow regions, while North (with 5.3 tonnes of net mercury outflows) is the largest net-outflow region. We also identify primary supply chains contributing to China's virtual atmospheric mercury emission network, which can be used to trace the transfers of production-side and demand-side policy effects.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuruganti, Phani Teja

The smart grid is a combined process of revitalizing the traditional power grid applications and introducing new applications to improve the efficiency of power generation, transmission and distribution. This can be achieved by leveraging advanced communication and networking technologies. Therefore the selection of the appropriate communication technology for different smart grid applications has been debated a lot in the recent past. After comparing different possible technologies, a recent research study has arrived at a conclusion that the 3G cellular technology is the right choice for distribution side smart grid applications like smart metering, advanced distribution automation and demand response managementmore » system. In this paper, we argue that the current 3G/4G cellular technologies are not an appropriate choice for smart grid distribution applications and propose a Hybrid Spread Spectrum (HSS) based Advanced Metering Infrastructure (AMI) as one of the alternatives to 3G/4G technologies. We present a preliminary PHY and MAC layer design of a HSS based AMI network and evaluate their performance using matlab and NS2 simulations. Also, we propose a time hierarchical scheme that can significantly reduce the volume of random access traffic generated during blackouts and the delay in power outage reporting.« less

A maternal health voucher scheme: what have we learned from the demand-side financing scheme in Bangladesh?

PubMed

Ahmed, Shakil; Khan, M Mahmud

2011-01-01

It is now more than 2 years since the Ministry of Health and Family Welfare of the Government of Bangladesh implemented the Maternal Health Voucher Scheme, a specialized form of demand-side financing programme. To analyse the early lessons from the scheme, information was obtained through semi-structured interviews with stakeholders at the sub-district level. The analysis identified a number of factors affecting the efficiency and performance of the scheme in the program area: delay in the release of voucher funds, selection criteria used for enrolling pregnant women in the programme, incentives created by the reimbursement system, etc. One of the objectives of the scheme was to encourage market competition among health care providers, but it failed to increase market competitiveness in the area. The resources made available through the scheme did not attract any new providers into the market and public facilities remained the only eligible provider both before and after scheme implementation. However, incentives provided through the voucher system did motivate public providers to offer a higher level of services. The beneficiaries expressed their overall satisfaction with the scheme as well. Since the local facility was not technically ready to provide all types of maternal health care services, providing vouchers may not improve access to care for many pregnant women. To improve the performance of the demand-side strategy, it has become important to adopt some supply-side interventions. In poor developing countries, a demand-side strategy may not be very effective without significant expansion of the service delivery capacity of health facilities at the sub-district level.

Application of a COTS Resource Optimization Framework to the SSN Sensor Tasking Domain - Part I: Problem Definition

NASA Astrophysics Data System (ADS)

Tran, T.

With the onset of the SmallSat era, the RSO catalog is expected to see continuing growth in the near future. This presents a significant challenge to the current sensor tasking of the SSN. The Air Force is in need of a sensor tasking system that is robust, efficient, scalable, and able to respond in real-time to interruptive events that can change the tracking requirements of the RSOs. Furthermore, the system must be capable of using processed data from heterogeneous sensors to improve tasking efficiency. The SSN sensor tasking can be regarded as an economic problem of supply and demand: the amount of tracking data needed by each RSO represents the demand side while the SSN sensor tasking represents the supply side. As the number of RSOs to be tracked grows, demand exceeds supply. The decision-maker is faced with the problem of how to allocate resources in the most efficient manner. Braxton recently developed a framework called Multi-Objective Resource Optimization using Genetic Algorithm (MOROUGA) as one of its modern COTS software products. This optimization framework took advantage of the maturing technology of evolutionary computation in the last 15 years. This framework was applied successfully to address the resource allocation of an AFSCN-like problem. In any resource allocation problem, there are five key elements: (1) the resource pool, (2) the tasks using the resources, (3) a set of constraints on the tasks and the resources, (4) the objective functions to be optimized, and (5) the demand levied on the resources. In this paper we explain in detail how the design features of this optimization framework are directly applicable to address the SSN sensor tasking domain. We also discuss our validation effort as well as present the result of the AFSCN resource allocation domain using a prototype based on this optimization framework.

Modeling and managing urban water demand through smart meters: Benefits and challenges from current research and emerging trends

NASA Astrophysics Data System (ADS)

Cominola, A.; Giuliani, M.; Castelletti, A.; Piga, D.; Rizzoli, A. E.

2015-12-01

Urban population growth, climate and land use change are expected to boost residential water demand in urban contexts in the next decades. In such a context, developing suitable demand-side management strategies is essential to meet future water demands, pursue water savings, and reduce the costs for water utilities. Yet, the effectiveness of water demand management strategies (WDMS) relies on our understanding of water consumers' behavior, their consumption habits, and the water use drivers. While low spatial and temporal resolution water consumption data, as traditionally gathered for billing purposes, hardly support this understanding, the advent of high-resolution, smart metering technologies allowed for quasi real-time monitoring water consumption at the single household level. This, in turn, is advancing our ability in characterizing consumers' behavior, modeling, and designing user-oriented residential water demand management strategies. Several water smart metering programs have been rolled-out in the last two decades worldwide, addressing one or more of the following water demand management phases: (i) data gathering, (ii) water end-uses characterization, (iii) user modeling, (iv) design and implementation of personalized WDMS. Moreover, the number of research studies in this domain is quickly increasing and big economic investments are currently being devoted worldwide to smart metering programs. With this work, we contribute the first comprehensive review of more than 100 experiences in the field of residential water demand modeling and management, and we propose a general framework for their classification. We revise consolidated practices, identify emerging trends and highlight the challenges and opportunities for future developments given by the use of smart meters advancing residential water demand management. Our analysis of the status quo of smart urban water demand management research and market constitutes a structured collection of information supporting the development of integrated procedures in the field of urban water management, as well as common actions aiding the collaboration with other sectors, as the nexus with energy demand management.

End-User Tools Towards AN Efficient Electricity Consumption: the Dynamic Smart Grid

NASA Astrophysics Data System (ADS)

Kamel, Fouad; Kist, Alexander A.

2010-06-01

Growing uncontrolled electrical demands have caused increased supply requirements. This causes volatile electrical markets and has detrimental unsustainable environmental impacts. The market is presently characterized by regular daily peak demand conditions associated with high electricity prices. A demand-side response system can limit peak demands to an acceptable level. The proposed scheme is based on energy demand and price information which is available online. An online server is used to communicate the information of electricity suppliers to users, who are able to use the information to manage and control their own demand. A configurable, intelligent switching system is used to control local loads during peak events and mange the loads at other times as necessary. The aim is to shift end user loads towards periods where energy demand and therefore also prices are at the lowest. As a result, this will flatten the load profile and avoiding load peeks which are costly for suppliers. The scheme is an endeavour towards achieving a dynamic smart grid demand-side-response environment using information-based communication and computer-controlled switching. Diffusing the scheme shall lead to improved electrical supply services and controlled energy consumption and prices.

Agriculture and Energy: Implications for Food Security, Water, and Land Use

NASA Astrophysics Data System (ADS)

Tokgoz, S.; Zhang, W.; Msangi, S.; Bhandary, P.

2011-12-01

Sustainable production of agricultural commodities and growth of international trade in these goods are challenged as never before by supply-side constraints (such as climate change, water and land scarcity, and environmental degradation) and by demand-side dynamics (volatility in food and energy markets, the strengthening food-energy linkage, population growth, and income growth). On the one hand, the rapidly expanding demand can potentially create new market opportunities for agriculture. On the other hand, there are many threats to a sufficient response by the supply side to meet this growing and changing demand. Agricultural production systems in many countries are neither resource-efficient, nor producing according to their full potential. The stock of natural resources such as land, water, nutrients, energy, and genetic diversity is shrinking relative to demand, and their use must become increasingly efficient in order to reduce environmental impacts and preserve the planet's productive capacity. World energy prices have increased rapidly in recent years. At the same time, agriculture has become more energy-intensive. Higher energy costs have pushed up the cost of producing, transporting and processing agricultural commodities, driving up commodity prices. Higher energy costs have also affected water use and availability through increased costs of water extraction, conveyance and desalinization, higher demand for hydroelectric power, and increased cost of subsidizing water services. In the meantime, the development of biofuels has diverted increasing amounts of agricultural land and water resources to the production of biomass-based renewable energy. This more "intensified" linkage between agriculture and energy comes at a time when there are other pressures on the world's limited resources. The related high food prices, especially those in the developing countries, have led to setbacks in the poverty alleviation effort among the global community with more population under hunger and poverty. In light of these threats and opportunities facing the global food system, the proposed study takes a long-term perspective and addresses the main medium and long- term drivers of agricultural markets using the International Model for Policy Analysis of Agricultural Commodities and Trade developed by the Environment and Production Technology Division of IFPRI to project future production, consumption, and trade of key agricultural commodities. The main objective of the study is to analyze the link between energy and agricultural markets, focusing on the "new" role of agriculture as a supplier of energy for transportation through biofuels, and the subsequent impact on land use and demand for water from the agricultural sector. In this context, this study incorporates various scenarios of future energy demand and energy price impacts on global agricultural markets (food prices and food security), water use implications (irrigation water consumption by agricultural sector), and land use implications (changes in national and global crop area). The scenarios are designed to understand the impact of energy prices on biofuel production, cost of production for agricultural crops, conversion of rainfed area to irrigated area, and necessary levels of crop productivity growth to counter these effects.

Twistact techno-economic analysis for wind turbine applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naughton, Brian Thomas; Koplow, Jeffrey P.; Vanness, Justin William

This report is the final deliverable for a techno-economic analysis of the Sandia National Laboratories-developed Twistact rotary electrical conductor. The U.S. Department of Energy Wind Energy Technologies Office supported a team of researchers at Sandia National Laboratories and the National Renewable Energy Laboratory to evaluate the potential of the Twistact technology to serve as a viable replacement to rare-earth materials used in permanent-magnet direct-drive wind turbine generators. This report compares three detailed generator models, two as baseline technologies and a third incorporating the Twistact technology. These models are then used to calculate the levelized cost of energy (LCOE) for threemore » comparable offshore wind plants using the three generator topologies. The National Renewable Energy Laboratorys techno-economic analysis indicates that Twistact technology can be used to design low-maintenance, brush-free, and wire-wound (instead of rare-earth-element (REE) permanent-magnet), direct-drive wind turbine generators without a significant change in LCOE and generation efficiency. Twistact technology acts as a hedge against sources of uncertain costs for direct-drive generators. On the one hand, for permanent-magnet direct-drive (PMDD) generators, the long-term price of REEs may increase due to increases in future demand, from electric vehicles and other technologies, whereas the supply remains limited and geographically concentrated. The potential higher prices in the future adversely affect the cost competitiveness of PMDD generators and may thwart industry investment in the development of the technology for wind turbine applications. Twistact technology can eliminate industry risk around the uncertainty of REE price and availability. Traditional wire-wound direct-drive generators experience reliability issues and higher maintenance costs because of the wear on the contact brushes necessary for field excitation. The brushes experience significant wear and require regular replacement over the lifetime of operation (on the order of a year or potentially less time). For offshore wind applications, the focus of this study, maintenance costs are higher than typical land-based systems due to the added time it often requires to access the site for repairs. Thus, eliminating the need for regular brush replacements reduces the uncertain costs and energy production losses associated with maintenance and replacement of contact brushes. Further, Twistact has a relatively negligible impact on LCOE but hedges risks associated with the current dominant designs for direct-drive generators for PMDD REE price volatility and wire-wound generator contact brush reliability. A final section looks at the overall supply chain of REEs considering the supply-side and demand-side drivers that encourage the risk of depending on these materials to support future deployment of not only wind energy but other industries as well.« less

Evaluating the administration costs of biologic drugs: development of a cost algorithm.

PubMed

Tetteh, Ebenezer K; Morris, Stephen

2014-12-01

Biologic drugs, as with all other medical technologies, are subject to a number of regulatory, marketing, reimbursement (financing) and other demand-restricting hurdles applied by healthcare payers. One example is the routine use of cost-effectiveness analyses or health technology assessments to determine which medical technologies offer value-for-money. The manner in which these assessments are conducted suggests that, holding all else equal, the economic value of biologic drugs may be determined by how much is spent on administering these drugs or trade-offs between drug acquisition and administration costs. Yet, on the supply-side, it seems very little attention is given to how manufacturing and formulation choices affect healthcare delivery costs. This paper evaluates variations in the administration costs of biologic drugs, taking care to ensure consistent inclusion of all relevant cost resources. From this, it develops a regression-based algorithm with which manufacturers could possibly predict, during process development, how their manufacturing and formulation choices may impact on the healthcare delivery costs of their products.

Forward Osmosis in India: Status and Comparison with Other Desalination Technologies

PubMed Central

2014-01-01

With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well. PMID:27350984

Forward Osmosis in India: Status and Comparison with Other Desalination Technologies.

PubMed

Mehta, Dhruv; Gupta, Lovleen; Dhingra, Rijul

2014-01-01

With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well.

Commercial users panel

NASA Technical Reports Server (NTRS)

Byrd, Joseph S.; Flatau, Carl; Hodge, David C.; Hollis, Ralph; Leach, Eugene F.; Gilbert, Ray; Cleland, John; Leifer, Larry; Naser, Joseph; Schmuter, Samson D.

1987-01-01

The discussions of motives and requirements for telerobotics application demonstrated that, in many cases, lack of progress was a result not of limited opportunities but of inadequate mechanisms and resources for promoting opportunities. Support for this conclusion came from Telerobotics, Inc., one of the few companies devoted primarily to telerobot systems. They have produced units for such diverse applications as nuclear fusion research, particle accelerators, cryogenics, firefighting, marine biology/undersea systems and nuclear mobile robotics. Mr. Flatau offered evidence that telerobotics research is only rarely supported by the private sector and that it often presents a difficult market. Questions on the mechanisms contained within the NASA technology transfer process for promoting commercial opportunities were fielded by Ray Gilbert and Tom Walters. A few points deserve emphasis: (1) NASA/industry technology transfer occurs in both directions and NASA recognizes the opportunity to learn a great deal from industry in the fields of automation and robotics; (2) promotion of technology transfer projects takes a demand side approach, with requests to industry for specific problem identification. NASA then proposes possible solutions; and (3) comittment ofmotivated and technically qualified people on each end of a technology transfer is essential.

The production of food: from quantity to quality.

PubMed

McInerney, John

2002-05-01

The present paper presents a non-technical overview of contemporary developments in food supply, as seen from the standpoint of economic adjustment. The historical concerns over availability and price of food have now passed in the UK, and agriculture is no longer dominantly driven by the supply-side forces of new farming technology and the stimulus of support policies. As a now demand-driven sector of the economy, it is the developing diversity of consumer food preferences that will increasingly determine the adjustment path of agricultural production. Those demands seek distinctive elements of food value, many of which are entirely created and delivered by industries beyond the farm gate. However, many of the quality characteristics of food that consumers increasingly seek are associated explicitly with what takes place on farms and how crop and livestock husbandry is conducted. In responding to these demand preferences many farmers will shift from being merely raw material producers to becoming genuine producers of food, or capturing more of the final value of the products consumed. As a result a dual structure within farming will develop, with a 'quality agriculture' becoming increasingly differentiated from a 'commodity agriculture' as two distinct strategies for farm business survival.

A Vision for Co-optimized T&D System Interaction with Renewables and Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Lindsay; Zéphyr, Luckny; Cardell, Judith B.

The evolution of the power system to the reliable, efficient and sustainable system of the future will involve development of both demand- and supply-side technology and operations. The use of demand response to counterbalance the intermittency of renewable generation brings the consumer into the spotlight. Though individual consumers are interconnected at the low-voltage distribution system, these resources are typically modeled as variables at the transmission network level. In this paper, a vision for cooptimized interaction of distribution systems, or microgrids, with the high-voltage transmission system is described. In this framework, microgrids encompass consumers, distributed renewables and storage. The energy managementmore » system of the microgrid can also sell (buy) excess (necessary) energy from the transmission system. Preliminary work explores price mechanisms to manage the microgrid and its interactions with the transmission system. Wholesale market operations are addressed through the development of scalable stochastic optimization methods that provide the ability to co-optimize interactions between the transmission and distribution systems. Modeling challenges of the co-optimization are addressed via solution methods for large-scale stochastic optimization, including decomposition and stochastic dual dynamic programming.« less

A Vision for Co-optimized T&D System Interaction with Renewables and Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, C. Lindsay; Zéphyr, Luckny; Liu, Jialin

The evolution of the power system to the reliable, effi- cient and sustainable system of the future will involve development of both demand- and supply-side technology and operations. The use of demand response to counterbalance the intermittency of re- newable generation brings the consumer into the spotlight. Though individual consumers are interconnected at the low-voltage distri- bution system, these resources are typically modeled as variables at the transmission network level. In this paper, a vision for co- optimized interaction of distribution systems, or microgrids, with the high-voltage transmission system is described. In this frame- work, microgrids encompass consumers, distributed renewablesmore » and storage. The energy management system of the microgrid can also sell (buy) excess (necessary) energy from the transmission system. Preliminary work explores price mechanisms to manage the microgrid and its interactions with the transmission system. Wholesale market operations are addressed through the devel- opment of scalable stochastic optimization methods that provide the ability to co-optimize interactions between the transmission and distribution systems. Modeling challenges of the co-optimization are addressed via solution methods for large-scale stochastic op- timization, including decomposition and stochastic dual dynamic programming.« less

Optimising technical skills and physical loading in small-sided basketball games.

PubMed

Klusemann, Markus J; Pyne, David B; Foster, Carl; Drinkwater, Eric J

2012-01-01

Differences in physiological, physical, and technical demands of small-sided basketball games related to the number of players, court size, and work-to-rest ratios are not well characterised. A controlled trial was conducted to compare the influence of number of players (2v2/4v4), court size (half/full court) and work-to-rest ratios (4x2.5 min/2x5 min) on the demands of small-sided games. Sixteen elite male and female junior players (aged 15-19 years) completed eight variations of a small-sided game in randomised order over a six-week period. Heart rate responses and rating of perceived exertion (RPE) were measured to assess the physiological load. Movement patterns and technical elements were assessed by video analysis. There were ∼60% more technical elements in 2v2 and ∼20% more in half court games. Heart rate (86 ± 4% & 83 ± 5% of maximum; mean ± SD) and RPE (8 ± 2 & 6 ± 2; scale 1-10) were moderately higher in 2v2 than 4v4 small-sided games, respectively. The 2v2 format elicited substantially more sprints (36 ±12%; mean ±90% confidence limits) and high intensity shuffling (75 ±17%) than 4v4. Full court games required substantially more jogging (9 ±6%) compared to half court games. Fewer players in small-sided basketball games substantially increases the technical, physiological and physical demands.

Digital Sensor Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Ken D.; Quinn, Edward L.; Mauck, Jerry L.

The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. Anmore » example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).« less

An integrative assessment of the commercial air transportation system via adaptive agents

NASA Astrophysics Data System (ADS)

Lim, Choon Giap

The overarching research objective is to address the tightly-coupled interactions between the demand-side and supply-side components of the United States Commercial Air Transportation System (CATS) in a time-variant environment. A system-of-system perspective is adopted, where the scope is extended beyond the National Airspace System (NAS) level to the National Transportation System (NTS) level to capture the intermodal and multimodal relationships between the NTS stakeholders. The Agent-Based Modeling and Simulation technique is employed where the NTS/NAS is treated as an integrated Multi-Agent System comprising of consumer and service provider agents, representing the demand-side and supply-side components respectively. Successful calibration and validation of both model components against the observable real world data resulted in a CATS simulation tool where the aviation demand is estimated from socioeconomic and demographic properties of the population instead of merely based on enplanement growth multipliers. This valuable achievement enabled a 20-year outlook simulation study to investigate the implications of a global fuel price hike on the airline industry and the U.S. CATS at large. Simulation outcomes revealed insights into the airline competitive behaviors and the subsequent responses from transportation consumers.

The Viability of Commodity Cartels: The Case of Oil.

ERIC Educational Resources Information Center

Bergeijk, Peter A. G. van

1989-01-01

Explains the rise and fall of the oil cartel by applying an elasticity of demand analysis. Beginning from the demand side of the market, offers a simple derivation of the elasticity of demand for the cartel's product. Maintains that method helps undergraduates comprehend basic properties, requiring only an understanding of the elasticities of…

10 CFR 905.15 - What are the requirements for the small customer plan alternative?

Code of Federal Regulations, 2011 CFR

2011-01-01

... all reasonable opportunities to meet future energy service requirements using demand-side management... applicable, and contact person; (ii) Type of customer; (iii) Current energy and demand profiles and data on... and demand use for end-use customers; (iv) Future energy services projections; (v) How items in...

Transportation Energy Futures: Combining Strategies for Deep Reductions in Energy Consumption and GHG Emissions (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2013-03-01

This fact sheet summarizes actions in the areas of light-duty vehicle, non-light-duty vehicle, fuel, and transportation demand that show promise for deep reductions in energy use. Energy efficient transportation strategies have the potential to simultaneously reduce oil consumption and greenhouse gas (GHG) emissions. The Transportation Energy Futures (TEF) project examined how the combination of multiple strategies could achieve deep reductions in GHG emissions and petroleum use on the order of 80%. Led by NREL, in collaboration with Argonne National Laboratory, the project's primary goal was to help inform domestic decisions about transportation energy strategies, priorities, and investments, with an emphasismore » on underexplored opportunities. TEF findings reveal three strategies with the potential to displace most transportation-related petroleum use and GHG emissions: 1) Stabilizing energy use in the transportation sector through efficiency and demand-side approaches. 2) Using additional advanced biofuels. 3) Expanding electric drivetrain technologies.« less

[Family practitioners in Switzerland by 2030: which roles for medical task delegation?].

PubMed

Jaccard Ruedin, Hélène; Seematter-Bagnoud, Laurence; Roth, Maik; Junod, Julien; Santos-Eggimann, Brigitte

2009-01-01

Due to population aging, by 2030 Switzerland may face a demand of 24 million family practitioner visits, a growth of 13 percent from the 2005 level. This result is based on the assumption that the per capita demand for doctor visits remains what was observed in 2005 by age groups and sex. During the same period, the total number of practitioners may decrease by 14 percent whereas the female proportion of such practitioners may double. These changes may cause a 33 percent decrease in the supply of physician visits to reach only 14 millions. The comparison of the demand and supply of family doctor visits reveals that by 2030, 10 million visits may be unmet which represents 40 percent of the demand. On the supply side, a full scale implementation of task delegation may partially reduce that gap (minus 2 millions). On the demand side, improved health status may bring in a larger decrease in the needs for visits (minus 4 million).

A distributed algorithm for demand-side management: Selling back to the grid.

PubMed

Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

2017-11-01

Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

Effects of dynamic-demand-control appliances on the power grid frequency.

PubMed

Tchuisseu, E B Tchawou; Gomila, D; Brunner, D; Colet, P

2017-08-01

Power grid frequency control is a demanding task requiring expensive idle power plants to adapt the supply to the fluctuating demand. An alternative approach is controlling the demand side in such a way that certain appliances modify their operation to adapt to the power availability. This is especially important to achieve a high penetration of renewable energy sources. A number of methods to manage the demand side have been proposed. In this work we focus on dynamic demand control (DDC), where smart appliances can delay their switchings depending on the frequency of the system. We introduce a simple model to study the effects of DDC on the frequency of the power grid. The model includes the power plant equations, a stochastic model for the demand that reproduces, adjusting a single parameter, the statistical properties of frequency fluctuations measured experimentally, and a generic DDC protocol. We find that DDC can reduce small and medium-size fluctuations but it can also increase the probability of observing large frequency peaks due to the necessity of recovering pending task. We also conclude that a deployment of DDC around 30-40% already allows a significant reduction of the fluctuations while keeping the number of pending tasks low.

Effects of dynamic-demand-control appliances on the power grid frequency

NASA Astrophysics Data System (ADS)

Tchuisseu, E. B. Tchawou; Gomila, D.; Brunner, D.; Colet, P.

2017-08-01

Power grid frequency control is a demanding task requiring expensive idle power plants to adapt the supply to the fluctuating demand. An alternative approach is controlling the demand side in such a way that certain appliances modify their operation to adapt to the power availability. This is especially important to achieve a high penetration of renewable energy sources. A number of methods to manage the demand side have been proposed. In this work we focus on dynamic demand control (DDC), where smart appliances can delay their switchings depending on the frequency of the system. We introduce a simple model to study the effects of DDC on the frequency of the power grid. The model includes the power plant equations, a stochastic model for the demand that reproduces, adjusting a single parameter, the statistical properties of frequency fluctuations measured experimentally, and a generic DDC protocol. We find that DDC can reduce small and medium-size fluctuations but it can also increase the probability of observing large frequency peaks due to the necessity of recovering pending task. We also conclude that a deployment of DDC around 30-40% already allows a significant reduction of the fluctuations while keeping the number of pending tasks low.

Integrating watershed hydrology and economics to establish a local market for water quality improvement: A field experiment.

PubMed

Uchida, Emi; Swallow, Stephen K; Gold, Arthur; Opaluch, James; Kafle, Achyut; Merrill, Nathaniel; Michaud, Clayton; Gill, Carrie Anne

2018-04-01

Innovative market mechanisms are being increasingly recognized as effective decision-making institutions to incorporate the value of ecosystem services into the economy. We present a field experiment that integrates an economic auction and a biophysical water flux model to develop a local market process consisting of both the supply and demand sides. On the supply side, we operate an auction with small-scale livestock owners who bid for contracts to implement site-specific manure management practices that reduce phosphorus loadings to a major reservoir. On the demand side, we implement a real money, multi-unit public good auction for these contracts with residents who potentially benefit from reduced water quality risks. The experiments allow us to construct supply and demand curves to find an equilibrium price for water quality improvement. The field experiments provide a proof-of-concept for practical implementation of a local market for environmental improvements, even for the challenging context of nonpoint pollution.

Promoting innovation in small markets: Evidence from the market for rare and intractable diseases.

PubMed

Iizuka, Toshiaki; Uchida, Gyo

2017-07-01

In many medical care markets with limited profit potential, firms often have little incentive to innovate. These include the market for rare diseases, "neglected" tropical diseases, and personalized medicine. Governments and not-for-profit organizations promote innovation in such markets but empirical evidence on the policy effect is limited. We study this issue by analyzing the impact of a demand-side policy in Japan, which reduces the cost sharing of patients with some rare and intractable diseases and attempts to establish and promote the treatment of those diseases. Using clinical trials data taken from public registries, we identify the effect of the policy using a difference-in-difference approach. We find that the demand-side policy increased firms' incentive to innovate: firm-sponsored clinical trials increased 181% (0.16 per disease per year) when covered by the policy. This result indicates that the demand-side policy can be an important part of innovation policies in markets with limited profit potential. Copyright © 2017 Elsevier B.V. All rights reserved.

The development of water services and their interaction with water resources in European and Brazilian cities

NASA Astrophysics Data System (ADS)

Barraqué, B.; Formiga Johnsson, R. M.; Nogueira de Paiva Britto, A. L.

2008-08-01

The extension and complexity of large cities creates "urban water" and a related issue: public water services, including public water supply, sewage collection and treatment, and storm water control, had previously become a policy sector separate from water resource allocation issues thanks to water transport and treatment technologies. Large metropolitan areas today cannot take nature for granted anymore, and they need to protect water resources, if only to reduce the long term cost of transporting and treating water. In this paper, we compare the historical development of water services in European and Brazilian metropolitan areas, placing the technological developments in their geographic, socio-economic and political contexts. Our frame is to follow the successive contributions of civil engineering, sanitary engineering, and environmental engineering: the "quantity of water" and civil engineering paradigm allowed to mobilise water in and out of the city, and up the hills or the floors; in the "water quality" and chemical/sanitary engineering paradigm, water treatment gave more freedom to cities to take water from rivers closer to them, but also to reduce sewer discharge impacts; lastly, the environmental engineering paradigm proposes to overcome the supply side perspective, by introducing demand side management, water conservation, water allocation flexibilisation, and an integrated approach to water services, water resources management, and land use policies.

Increasing the demand for childhood vaccination in developing countries: a systematic review

PubMed Central

2009-01-01

Background Attempts to maintain or increase vaccination coverage almost all focus on supply side interventions: improving availability and delivery of vaccines. The effectiveness and cost-effectiveness of efforts to increase demand is uncertain. Methods We performed a systematic review of studies that provided quantitative estimates of the impact of demand side interventions on uptake of routine childhood vaccination. We retrieved studies published up to Sept 2008. Results The initial search retrieved 468 potentially eligible studies, including four systematic reviews and eight original studies of the impact of interventions to increase demand for vaccination. We identified only two randomised controlled trials. Interventions with an impact on vaccination uptake included knowledge translation (KT) (mass media, village resource rooms and community discussions) and non-KT initiatives (incentives, economic empowerment, household visits by extension workers). Most claimed to increase vaccine coverage by 20 to 30%. Estimates of the cost per vaccinated child varied considerably with several in the range of $10-20 per vaccinated child. Conclusion Most studies reviewed here represented a low level of evidence. Mass media campaigns may be effective, but the impact depends on access to media and may be costly if run at a local level. The persistence of positive effects has not been investigated. The economics of demand side interventions have not been adequately assessed, but available data suggest that some may be very cost-effective. PMID:19828063

High Penetration of Electrical Vehicles in Microgrids: Threats and Opportunities

NASA Astrophysics Data System (ADS)

Khederzadeh, Mojtaba; Khalili, Mohammad

2014-10-01

Given that the microgrid concept is the building block of future electric distribution systems and electrical vehicles (EVs) are the future of transportation market, in this paper, the impact of EVs on the performance of microgrids is investigated. Demand-side participation is used to cope with increasing demand for EV charging. The problem of coordination of EV charging and discharging (with vehicle-to-grid (V2G) functionality) and demand response is formulated as a market-clearing mechanism that accepts bids from the demand and supply sides and takes into account the constraints put forward by different parts. Therefore, a day-ahead market with detailed bids and offers within the microgrid is designed whose objective is to maximize the social welfare which is the difference between the value that consumers attach to the electrical energy they buy plus the benefit of the EV owners participating in the V2G functionality and the cost of producing/purchasing this energy. As the optimization problem is a mixed integer nonlinear programming one, it is decomposed into one master problem for energy scheduling and one subproblem for power flow computation. The two problems are solved iteratively by interfacing MATLAB with GAMS. Simulation results on a sample microgrid with different residential, commercial and industrial consumers with associated demand-side biddings and different penetration level of EVs support the proposed formulation of the problem and the applied methods.

Utility competition, DSM, and piano bars: The fatal flaw

DOE Office of Scientific and Technical Information (OSTI.GOV)

Studness, C.M.

1993-08-01

This article is an economic analysis of demand side management (DSM). The author contends that utilities and regulators have lost sight of their primary mission of providing electric power as efficiently as possible; DSM conflicts with this mission. DSM measures have not be submitted to a market test, so utilities are not necessarily providing the customers with what they want. This situation is compared to the airline industry before deregulation, when airlines provided expensive services that customers did not want. Also, with present technology, DSM measures consume more in total resources than it what it costs to produce electricity, therebymore » depleting the nation's resources at a greater rate.« less

Effects of demand-side financing on utilisation, experiences and outcomes of maternity care in low- and middle-income countries: a systematic review

PubMed Central

2014-01-01

Background Demand-side financing, where funds for specific services are channelled through, or to, prospective users, is now employed in health and education sectors in many low- and middle-income countries. This systematic review aimed to critically examine the evidence on application of this approach to promote maternal health in these settings. Five modes were considered: unconditional cash transfers, conditional cash transfers, short-term payments to offset costs of accessing maternity services, vouchers for maternity services, and vouchers for merit goods. We sought to assess the effects of these interventions on utilisation of maternity services and on maternal health outcomes and infant health, the situation of underprivileged women and the healthcare system. Methods The protocol aimed for collection and synthesis of a broad range of evidence from quantitative, qualitative and economic studies. Nineteen health and social policy databases, seven unpublished research databases and 27 websites were searched; with additional searches of Indian journals and websites. Studies were included if they examined demand-side financing interventions to increase consumption of services or goods intended to impact on maternal health, and met relevant quality criteria. Quality assessment, data extraction and analysis used Joanna Briggs Institute standardised tools and software. Outcomes of interest included maternal and infant mortality and morbidity, service utilisation, factors required for successful implementation, recipient and provider experiences, ethical issues, and cost-effectiveness. Findings on Effectiveness, Feasibility, Appropriateness and Meaningfulness were presented by narrative synthesis. Results Thirty-three quantitative studies, 46 qualitative studies, and four economic studies from 17 countries met the inclusion criteria. Evidence on unconditional cash transfers was scanty. Other demand-side financing modes were found to increase utilisation of maternal healthcare in the index pregnancy or uptake of related merit goods. Evidence of effects on maternal and infant mortality and morbidity outcomes was insufficient. Important implementation aspects include targeting and eligibility criteria, monitoring, respectful treatment of beneficiaries, suitable incentives for providers, quality of care and affordable referral systems. Conclusions Demand-side financing schemes can increase utilisation of maternity services, but attention must be paid to supply-side conditions, the fine-grain of implementation and sustainability. Comparative studies and research on health impact and cost-effectiveness are required. PMID:24438560

Effects of demand-side financing on utilisation, experiences and outcomes of maternity care in low- and middle-income countries: a systematic review.

PubMed

Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

2014-01-17

Demand-side financing, where funds for specific services are channelled through, or to, prospective users, is now employed in health and education sectors in many low- and middle-income countries. This systematic review aimed to critically examine the evidence on application of this approach to promote maternal health in these settings. Five modes were considered: unconditional cash transfers, conditional cash transfers, short-term payments to offset costs of accessing maternity services, vouchers for maternity services, and vouchers for merit goods. We sought to assess the effects of these interventions on utilisation of maternity services and on maternal health outcomes and infant health, the situation of underprivileged women and the healthcare system. The protocol aimed for collection and synthesis of a broad range of evidence from quantitative, qualitative and economic studies. Nineteen health and social policy databases, seven unpublished research databases and 27 websites were searched; with additional searches of Indian journals and websites. Studies were included if they examined demand-side financing interventions to increase consumption of services or goods intended to impact on maternal health, and met relevant quality criteria. Quality assessment, data extraction and analysis used Joanna Briggs Institute standardised tools and software. Outcomes of interest included maternal and infant mortality and morbidity, service utilisation, factors required for successful implementation, recipient and provider experiences, ethical issues, and cost-effectiveness. Findings on Effectiveness, Feasibility, Appropriateness and Meaningfulness were presented by narrative synthesis. Thirty-three quantitative studies, 46 qualitative studies, and four economic studies from 17 countries met the inclusion criteria. Evidence on unconditional cash transfers was scanty. Other demand-side financing modes were found to increase utilisation of maternal healthcare in the index pregnancy or uptake of related merit goods. Evidence of effects on maternal and infant mortality and morbidity outcomes was insufficient. Important implementation aspects include targeting and eligibility criteria, monitoring, respectful treatment of beneficiaries, suitable incentives for providers, quality of care and affordable referral systems. Demand-side financing schemes can increase utilisation of maternity services, but attention must be paid to supply-side conditions, the fine-grain of implementation and sustainability. Comparative studies and research on health impact and cost-effectiveness are required.

Real-Time Load-Side Control of Electric Power Systems

NASA Astrophysics Data System (ADS)

Zhao, Changhong

Two trends are emerging from modern electric power systems: the growth of renewable (e.g., solar and wind) generation, and the integration of information technologies and advanced power electronics. The former introduces large, rapid, and random fluctuations in power supply, demand, frequency, and voltage, which become a major challenge for real-time operation of power systems. The latter creates a tremendous number of controllable intelligent endpoints such as smart buildings and appliances, electric vehicles, energy storage devices, and power electronic devices that can sense, compute, communicate, and actuate. Most of these endpoints are distributed on the load side of power systems, in contrast to traditional control resources such as centralized bulk generators. This thesis focuses on controlling power systems in real time, using these load side resources. Specifically, it studies two problems. (1) Distributed load-side frequency control: We establish a mathematical framework to design distributed frequency control algorithms for flexible electric loads. In this framework, we formulate a category of optimization problems, called optimal load control (OLC), to incorporate the goals of frequency control, such as balancing power supply and demand, restoring frequency to its nominal value, restoring inter-area power flows, etc., in a way that minimizes total disutility for the loads to participate in frequency control by deviating from their nominal power usage. By exploiting distributed algorithms to solve OLC and analyzing convergence of these algorithms, we design distributed load-side controllers and prove stability of closed-loop power systems governed by these controllers. This general framework is adapted and applied to different types of power systems described by different models, or to achieve different levels of control goals under different operation scenarios. We first consider a dynamically coherent power system which can be equivalently modeled with a single synchronous machine. We then extend our framework to a multi-machine power network, where we consider primary and secondary frequency controls, linear and nonlinear power flow models, and the interactions between generator dynamics and load control. (2) Two-timescale voltage control: The voltage of a power distribution system must be maintained closely around its nominal value in real time, even in the presence of highly volatile power supply or demand. For this purpose, we jointly control two types of reactive power sources: a capacitor operating at a slow timescale, and a power electronic device, such as a smart inverter or a D-STATCOM, operating at a fast timescale. Their control actions are solved from optimal power flow problems at two timescales. Specifically, the slow-timescale problem is a chance-constrained optimization, which minimizes power loss and regulates the voltage at the current time instant while limiting the probability of future voltage violations due to stochastic changes in power supply or demand. This control framework forms the basis of an optimal sizing problem, which determines the installation capacities of the control devices by minimizing the sum of power loss and capital cost. We develop computationally efficient heuristics to solve the optimal sizing problem and implement real-time control. Numerical experiments show that the proposed sizing and control schemes significantly improve the reliability of voltage control with a moderate increase in cost.

A Rising Tide Lifts All Boats: America's New Test of 'Supply Side' Economics. Fundamentals of Free Enterprise, No. 7.

ERIC Educational Resources Information Center

American Fletcher National Bank and Trust Co., Indianapolis, IN.

Designed for high school economics students as a public service project of the American Fletcher National Bank, the booklet examines the "supply-side" philosophy of economics of the Reagan Administration as compared to the "demand-side" emphasis of the past. The manipulation of the nation's economy by raising or lowering…

Pharmaceutical pricing and reimbursement in China: When the whole is less than the sum of its parts.

PubMed

Hu, Jia; Mossialos, Elias

2016-05-01

In recent years, there has been rapid growth in pharmaceutical spending in China. In addition, the country faces many challenges with regards to the quality, pricing and affordability of drugs. Pricing and reimbursement are important aspects of pharmaceutical policy that must be prioritised in order to address the many challenges. This review draws on multiple sources of information. A review of the academic and grey literature along with official government statistics were combined with information from seminars held by China's State Council Development Research Center to provide an overview of pharmaceutical pricing and reimbursement in China. Pricing and reimbursement policy were analysed through a framework that incorporates supply-side policies, proxy-demand policies and demand-side policies. China's current pharmaceutical policies interact in such a way to create dysfunction in the form of high prices, low drug quality, irrational prescribing and problems with access. Finally, the country's fragmented regulatory environment hampers pharmaceutical policy reform. The pricing and reimbursement policy landscape can be improved through higher drug quality standards, greater market concentration, an increase in government subsidies, quality-oriented tendering, wider implementation of the zero mark-up policy, through linking reimbursement with rational prescribing, and the promotion of health technology assessment and comparative effectiveness research. Addressing broader issues of regulatory fragmentation, the lack of transparency and corruption will help ensure that policies are created in a coherent, evidence-based fashion. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Comparing the physical demands of friendly matches and small-sided games in semiprofessional soccer players.

PubMed

Casamichana, David; Castellano, Julen; Castagna, Carlo

2012-03-01

This study compared the physical demands of friendly matches (FMs) and small-sided games (SGs) in semiprofessional soccer players by means of global positioning system technology. Twenty-seven semiprofessional soccer players were monitored during 7 FMs and 9 sessions involving different SGs. Their physical profile was described on the basis of 20 variables related to distances and frequencies at different running speeds, the number of accelerations, and through global indicators of workload such as the work:rest ratio, player workload, and the exertion index. Results showed significant differences (p < 0.01) between SGs and FMs for the following variables: overall workload (SG > FM); the distribution of the distance covered in the speed zones 7.0-12.9 km·h(-1) (SG > FM) and >21 km·h(-1) (FM > SG); the distribution of time spent in certain speed zones (FM > SG: 0.0-6.9 and >21 km·h(-1); FM > SG: 7.0-12.9 km·h(-1)). More sprints per hour of play were performed during FMs, with greater mean durations and distances, greater maximum durations and distances, and a greater frequency per hour of play for sprints of 10-40 and >40 m (p < 0.01). The frequency of repeated high-intensity efforts was higher during FM (p < 0.01). The results show that coaches and strength and conditioning professionals should consider FMs during their training routine to foster specific adaptations in the domain of high-intensity effort.

A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

NASA Astrophysics Data System (ADS)

Samoylenko, Vladislav O.; Pazderin, Andrew V.

2017-06-01

An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

Projections of Demand for Waterborne Transportation, Ohio River Basin, 1980, 1990, 2000, 2020, 2040. Volume 1. Study Summary.

DTIC Science & Technology

1980-12-01

NOTES 3 19. KEY WORDS (Continue on revere side If n.cessary d Identify by block number) Bulk cargo Market demand analysis Commodity resource inventory...The study included a Commodity Resource Inventory, a Modal Split Analysis and a Market Demand Analysis. The work included investigation and analyses...inventory, a modal split analysis and a market demand analysis. The work included investigation and analyses of the production, transportation, and

Mining residential water and electricity demand data in Southern California to inform demand management strategies

NASA Astrophysics Data System (ADS)

Cominola, A.; Spang, E. S.; Giuliani, M.; Castelletti, A.; Loge, F. J.; Lund, J. R.

2016-12-01

Demand side management strategies are key to meet future water and energy demands in urban contexts, promote water and energy efficiency in the residential sector, provide customized services and communications to consumers, and reduce utilities' costs. Smart metering technologies allow gathering high temporal and spatial resolution water and energy consumption data and support the development of data-driven models of consumers' behavior. Modelling and predicting resource consumption behavior is essential to inform demand management. Yet, analyzing big, smart metered, databases requires proper data mining and modelling techniques, in order to extract useful information supporting decision makers to spot end uses towards which water and energy efficiency or conservation efforts should be prioritized. In this study, we consider the following research questions: (i) how is it possible to extract representative consumers' personalities out of big smart metered water and energy data? (ii) are residential water and energy consumption profiles interconnected? (iii) Can we design customized water and energy demand management strategies based on the knowledge of water- energy demand profiles and other user-specific psychographic information? To address the above research questions, we contribute a data-driven approach to identify and model routines in water and energy consumers' behavior. We propose a novel customer segmentation procedure based on data-mining techniques. Our procedure consists of three steps: (i) extraction of typical water-energy consumption profiles for each household, (ii) profiles clustering based on their similarity, and (iii) evaluation of the influence of candidate explanatory variables on the identified clusters. The approach is tested onto a dataset of smart metered water and energy consumption data from over 1000 households in South California. Our methodology allows identifying heterogeneous groups of consumers from the studied sample, as well as characterizing them with respect to consumption profiles features and socio- demographic information. Results show how such better understanding of the considered users' community allows spotting potentially interesting areas for water and energy demand management interventions.

Optimal Load-Side Control for Frequency Regulation in Smart Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Changhong; Mallada, Enrique; Low, Steven

Frequency control rebalances supply and demand while maintaining the network state within operational margins. It is implemented using fast ramping reserves that are expensive and wasteful, and which are expected to become increasingly necessary with the current acceleration of renewable penetration. The most promising solution to this problem is the use of demand response, i.e., load participation in frequency control. Yet it is still unclear how to efficiently integrate load participation without introducing instabilities and violating operational constraints. In this paper, we present a comprehensive load-side frequency control mechanism that can maintain the grid within operational constraints. In particular, ourmore » controllers can rebalance supply and demand after disturbances, restore the frequency to its nominal value, and preserve interarea power flows. Furthermore, our controllers are distributed (unlike the currently implemented frequency control), can allocate load updates optimally, and can maintain line flows within thermal limits. We prove that such a distributed load-side control is globally asymptotically stable and robust to unknown load parameters. We illustrate its effectiveness through simulations.« less

A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

NASA Astrophysics Data System (ADS)

Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

2015-12-01

Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure soil moisture requirements met while, balancing the overall system load with generation, reducing critical power mismatches. Through this presentation the author will describe different techniques and results from field experiments in India.

Self-estimates of distractibility as related to performance decrement on a task requiring sustained attention.

DOT National Transportation Integrated Search

1972-07-01

Increasing automation of air traffic control tasks may have the undesirable side effect of increased monotony as a result of the anticipated reduction in task demands. 50 subjects performed a monotonous, but perceptually demanding task, for approxima...

Effect of a package of integrated demand- and supply-side interventions on facility delivery rates in rural Bangladesh: Implications for large-scale programs

PubMed Central

Choudhury, Aziz Ahmed; Khanam, Rasheda; Moin, Syed Mamun Ibne; Ahmed, Salahuddin; Begum, Nazma; Shoma, Nurun Naher; Quaiyum, Md Abdul; Baqui, Abdullah H.

2017-01-01

Background According to the Bangladesh Demographic and Health Survey 2014, only approximately 37 percent of women deliver in a health facility. Among the eight administrative divisions of Bangladesh, the facility delivery rate is lowest in the Sylhet division (22.6 percent) where we assessed the effect of integrated supply- and demand-side interventions on the facility-based delivery rate. Methods Population-based cohort data of pregnant women from an ongoing maternal and newborn health improvement study being conducted in a population of ~120,000 in Sylhet district were used. The study required collection and processing of biological samples immediately after delivery. Therefore, the project assembled various strategies to increase institutional delivery rates. The supply-side intervention included capacity expansion of the health facilities through service provider refresher training, 24/7 service coverage, additions of drugs and supplies, and incentives to the providers. The demand-side component involved financial incentives to cover expenses, a provision of emergency transport, and referral support to a tertiary-level hospital. We conducted a before-and-after observational study to assess the impact of the intervention in a total of 1,861 deliveries between December 2014 and November 2016. Results Overall, implementation of the intervention package was associated with 52.6 percentage point increase in the proportions of facility-based deliveries from a baseline rate of 25.0 percent to 77.6 percent in 24 months. We observed lower rates of institutional deliveries when only supply-side interventions were implemented. The proportion rose to 47.1 percent and continued increasing when the project emphasized addressing the financial barriers to accessing obstetric care in a health facility. Conclusions An integrated supply- and demand-side intervention was associated with a substantial increase in institutional delivery. The package can be tailored to identify which combination of interventions may produce the optimum result and be scaled. Rigorous implementation research studies are needed to draw confident conclusions and to provide information about the costs, feasibility for scale-up and sustainability. PMID:29073229

Soft Systems Methodology for Personalized Learning Environment

ERIC Educational Resources Information Center

Nair, Uday

2015-01-01

There are two sides to a coin when it comes to implementing technology at universities; on one side, there is the university using technologies via the virtual learning environment that seems to be outdated with the digital needs of the students, and on the other side, while implementing technology at the university learning environment the focus…

Mechanics of Flapping Flight: Analytical Formulations of Unsteady Aerodynamics, Kinematic Optimization, Flight Dynamics, and Control

NASA Astrophysics Data System (ADS)

Taneja, Jayant Kumar

Electricity is an indispensable commodity to modern society, yet it is delivered via a grid architecture that remains largely unchanged over the past century. A host of factors are conspiring to topple this dated yet venerated design: developments in renewable electricity generation technology, policies to reduce greenhouse gas emissions, and advances in information technology for managing energy systems. Modern electric grids are emerging as complex distributed systems in which a portfolio of power generation resources, often incorporating fluctuating renewable resources such as wind and solar, must be managed dynamically to meet uncontrolled, time-varying demand. Uncertainty in both supply and demand makes control of modern electric grids fundamentally more challenging, and growing portfolios of renewables exacerbate the challenge. We study three electricity grids: the state of California, the province of Ontario, and the country of Germany. To understand the effects of increasing renewables, we develop a methodology to scale renewables penetration. Analyzing these grids yields key insights about rigid limits to renewables penetration and their implications in meeting long-term emissions targets. We argue that to achieve deep penetration of renewables, the operational model of the grid must be inverted, changing the paradigm from load-following supplies to supply-following loads. To alleviate the challenge of supply-demand matching on deeply renewable grids, we first examine well-known techniques, including altering management of existing supply resources, employing utility-scale energy storage, targeting energy efficiency improvements, and exercising basic demand-side management. Then, we create several instantiations of supply-following loads -- including refrigerators, heating and cooling systems, and laptop computers -- by employing a combination of sensor networks, advanced control techniques, and enhanced energy storage. We examine the capacity of each load for supply-following and study the behaviors of populations of these loads, assessing their potential at various levels of deployment throughout the California electricity grid. Using combinations of supply-following strategies, we can reduce peak natural gas generation by 19% on a model of the California grid with 60% renewables. We then assess remaining variability on this deeply renewable grid incorporating supply-following loads, characterizing additional capabilities needed to ensure supply-demand matching in future sustainable electricity grids.

Hydrologic considerations for estimation of storage-capacity requirements of impounding and side-channel reservoirs for water supply in Ohio

USGS Publications Warehouse

Koltun, G.F.

2001-01-01

This report provides data and methods to aid in the hydrologic design or evaluation of impounding reservoirs and side-channel reservoirs used for water supply in Ohio. Data from 117 streamflow-gaging stations throughout Ohio were analyzed by means of nonsequential-mass-curve-analysis techniques to develop relations between storage requirements, water demand, duration, and frequency. Information also is provided on minimum runoff for selected durations and frequencies. Systematic record lengths for the streamflow-gaging stations ranged from about 10 to 75 years; however, in many cases, additional streamflow record was synthesized. For impounding reservoirs, families of curves are provided to facilitate the estimation of storage requirements as a function of demand and the ratio of the 7-day, 2-year low flow to the mean annual flow. Information is provided with which to evaluate separately the effects of evaporation on storage requirements. Comparisons of storage requirements for impounding reservoirs determined by nonsequential-mass-curve-analysis techniques with storage requirements determined by annual-mass-curve techniques that employ probability routing to account for carryover-storage requirements indicate that large differences in computed required storages can result from the two methods, particularly for conditions where demand cannot be met from within-year storage. For side-channel reservoirs, tables of demand-storage-frequency information are provided for a primary pump relation consisting of one variable-speed pump with a pumping capacity that ranges from 0.1 to 20 times demand. Tables of adjustment ratios are provided to facilitate determination of storage requirements for 19 other pump sets consisting of assorted combinations of fixed-speed pumps or variable-speed pumps with aggregate pumping capacities smaller than or equal to the primary pump relation. The effects of evaporation on side-channel reservoir storage requirements are incorporated into the storage-requirement estimates. The effects of an instream-flow requirement equal to the 80-percent-duration flow are also incorporated into the storage-requirement estimates.

Individual Learning Route as a Way of Highly Qualified Specialists Training for Extraction of Solid Commercial Minerals Enterprises

NASA Astrophysics Data System (ADS)

Oschepkova, Elena; Vasinskaya, Irina; Sockoluck, Irina

2017-11-01

In view of changing educational paradigm (adopting of two-tier system of higher education concept - undergraduate and graduate programs) a need of using of modern learning and information and communications technologies arises putting into practice learner-centered approaches in training of highly qualified specialists for extraction and processing of solid commercial minerals enterprises. In the unstable market demand situation and changeable institutional environment, from one side, and necessity of work balancing, supplying conditions and product quality when mining-and-geological parameters change, from the other side, mining enterprises have to introduce and develop the integrated management process of product and informative and logistic flows under united management system. One of the main limitations, which keeps down the developing process on Russian mining enterprises, is staff incompetence at all levels of logistic management. Under present-day conditions extraction and processing of solid commercial minerals enterprises need highly qualified specialists who can do self-directed researches, develop new and improve present arranging, planning and managing technologies of technical operation and commercial exploitation of transport and transportation and processing facilities based on logistics. Learner-centered approach and individualization of the learning process necessitate the designing of individual learning route (ILR), which can help the students to realize their professional facilities according to requirements for specialists for extraction and processing of solid commercial minerals enterprises.

Identification of potential sewer mining locations: a Monte-Carlo based approach.

PubMed

Tsoukalas, I K; Makropoulos, C K; Michas, S N

2017-12-01

Rapid urbanization affecting demand patterns, coupled with potential water shortages due to supply side impacts of climatic changes, has led to the emergence of new technologies for water and wastewater reuse. Sewer mining (SM) is a novel decentralized option that could potentially provide non-potable water for urban uses, including for example the irrigation of urban green spaces, providing a mid-scale solution to effective wastewater reuse. SM is based on extracting wastewater from local sewers and treatment at the point of demand and entails in some cases the return of treatment residuals back to the sewer system. Several challenges are currently in the way of such applications in Europe, including public perception, inadequate regulatory frameworks and engineering issues. In this paper we consider some of these engineering challenges, looking at the sewer network as a system where multiple physical, biological and chemical processes take place. We argue that prior to implementing SM, the dynamics of the sewer system should be investigated in order to identify optimum ways of deploying SM without endangering the reliability of the system. Specifically, both wastewater extraction and sludge return could result in altering the biochemical process of the network, thus unintentionally leading to degradation of the sewer infrastructure. We propose a novel Monte-Carlo based method that takes into account both spatial properties and water demand characteristics of a given area of SM deployment while simultaneously accounting for the variability of sewer network dynamics in order to identify potential locations for SM implementation. The outcomes of this study suggest that the method can provide rational results and useful guidelines for upscale SM technologies at a city level.

Real-time monitoring for detection of retained surgical sponges and team motion in the surgical operation room using radio-frequency-identification (RFID) technology: a preclinical evaluation.

PubMed

Kranzfelder, Michael; Zywitza, Dorit; Jell, Thomas; Schneider, Armin; Gillen, Sonja; Friess, Helmut; Feussner, Hubertus

2012-06-15

Technical progress in the surgical operating room (OR) increases constantly, facilitating the development of intelligent OR systems functioning as "safety backup" in the background of surgery. Precondition is comprehensive data retrieval to identify imminent risky situations and inaugurate adequate security mechanisms. Radio-frequency-identification (RFID) technology may have the potential to meet these demands. We set up a pilot study investigating feasibility and appliance reliability of a stationary RFID system for real-time surgical sponge monitoring (passive tagged sponges, position monitoring: mayo-stand/abdominal situs/waste bucket) and OR team tracking (active transponders, position monitoring: right/left side of OR table). In vitro: 20/20 sponges (100%) were detected on the mayo-stand and within the OR-phantom, however, real-time detection accuracy declined to 7/20 (33%) when the tags were moved simultaneously. All retained sponges were detected correctly. In vivo (animal): 7-10/10 sterilized sponges (70%-100%) were detected correctly within the abdominal cavity. OR-team: detection accuracy within the OR (surveillance antenna) and on both sides of the OR table (sector antenna) was 100%. Mean detection time for position change (left to right side and contrariwise) was 30-60 s. No transponder failure was noted. This is the first combined RFID system that has been developed for stationary use in the surgical OR. Preclinical evaluation revealed a reliable sponge tracking and correct detection of retained textiles (passive RFID) but also demonstrated feasibility of comprehensive data acquisition of team motion (active RFID). However, detection accuracy needs to be further improved before implementation into the surgical OR. Copyright © 2012 Elsevier Inc. All rights reserved.

18 CFR 430.13 - Protected area permits for new withdrawals.

Code of Federal Regulations, 2010 CFR

2010-04-01

... space heating or cooling that are subsequently used for commercial or industrial water supply purposes... against significant leaks of refrigerant, all ground water heat pump systems shall be equipped with an... resource requirements; evaluate supply-side and demand-side alternatives to meet water withdrawal needs...

Decentralization of Education: Demand-Side Financing. Directions in Development.

ERIC Educational Resources Information Center

Patrinos, Harry A.; Ariasingam, David L.

Central governments' supply-side expansions of schooling have not equally benefited all members of society, especially girls, indigenous peoples, tribal groups, disadvantaged minorities, and the poor. Public spending on education is often inefficient, higher education is subsidized at primary education's expense, and costs are becoming…

Decomposition of toxicity emission changes on the demand and supply sides: empirical study of the US industrial sector

NASA Astrophysics Data System (ADS)

Fujii, Hidemichi; Okamoto, Shunsuke; Kagawa, Shigemi; Managi, Shunsuke

2017-12-01

This study investigated the changes in the toxicity of chemical emissions from the US industrial sector over the 1998-2009 period. Specifically, we employed a multiregional input-output analysis framework and integrated a supply-side index decomposition analysis (IDA) with a demand-side structural decomposition analysis (SDA) to clarify the main drivers of changes in the toxicity of production- and consumption-based chemical emissions. The results showed that toxic emissions from the US industrial sector decreased by 83% over the studied period because of pollution abatement efforts adopted by US industries. A variety of pollution abatement efforts were used by different industries, and cleaner production in the mining sector and the use of alternative materials in the manufacture of transportation equipment represented the most important efforts.

How a Regional Broker Can Improve Industry Demand for University Interaction: A Case Study of the London Technology Network

ERIC Educational Resources Information Center

Reid, Peter; Schofield, Matt

2006-01-01

UK university research produces highly cited publications (DTI, 2004), but demand from UK business for commercial ideas from academia is weak (HM Treasury, 2003). This paper reviews factors in the development of one regional UK technology broker, the London Technology Network (LTN), which has achieved significant and audited business demand. The…

Comparative advantage strategy for rapid pollution mitigation in China.

PubMed

Xu, Yuan

2013-09-03

Due to its sheer size and growth trend, no other country is facing more daunting challenges than China in reducing its pollutant emissions. A critical but inadequately addressed question is how rapidly China could feasibly achieve such mitigation. The stake is high not only about how much worse China's environmental quality could become but also about how the world can prevent catastrophic climate change. Through examining sulfur dioxide (SO2) mitigation in coal-fired power plants and wind energy development for carbon dioxide (CO2) mitigation, this article proposes a comparative advantage strategy for overcoming high barriers to fast pollution mitigation. On the demand side, China could first make progress in the deployment of more pollution control facilities and then improve their operational performance. The resulting low technological market entry barriers could help to build enough industrial capacity to meet the huge demand with prices under control. The strategy in the current practice could be improved to establish not only a large supply industry but also a strong one to enable other countries to move more rapidly in pollution mitigation.

A System Dynamics Modeling of Water Supply and Demand in Las Vegas Valley

NASA Astrophysics Data System (ADS)

Parajuli, R.; Kalra, A.; Mastino, L.; Velotta, M.; Ahmad, S.

2017-12-01

The rise in population and change in climate have posed the uncertainties in the balance between supply and demand of water. The current study deals with the water management issues in Las Vegas Valley (LVV) using Stella, a system dynamics modeling software, to model the feedback based relationship between supply and demand parameters. Population parameters were obtained from Center for Business and Economic Research while historical water demand and conservation practices were modeled as per the information provided by local authorities. The water surface elevation of Lake Mead, which is the prime source of water supply to the region, was modeled as the supply side whereas the water demand in LVV was modeled as the demand side. The study was done from the period of 1989 to 2049 with 1989 to 2012 as the historical one and the period from 2013 to 2049 as the future period. This study utilizes Coupled Model Intercomparison Project data sets (2013-2049) (CMIP3&5) to model different future climatic scenarios. The model simulates the past dynamics of supply and demand, and then forecasts the future water budget for the forecasted future population and future climatic conditions. The results can be utilized by the water authorities in understanding the future water status and hence plan suitable conservation policies to allocate future water budget and achieve sustainable water management.

Capacitive Feedthroughs for Medical Implants

PubMed Central

Grob, Sven; Tass, Peter A.; Hauptmann, Christian

2016-01-01

Important technological advances in the last decades paved the road to a great success story for electrically stimulating medical implants, including cochlear implants or implants for deep brain stimulation. However, there are still many challenges in reducing side effects and improving functionality and comfort for the patient. Two of the main challenges are the wish for smaller implants on one hand, and the demand for more stimulation channels on the other hand. But these two aims lead to a conflict of interests. This paper presents a novel design for an electrical feedthrough, the so called capacitive feedthrough, which allows both reducing the size, and increasing the number of included channels. Capacitive feedthroughs combine the functionality of a coupling capacitor and an electrical feedthrough within one and the same structure. The paper also discusses the progress and the challenges of the first produced demonstrators. The concept bears a high potential in improving current feedthrough technology, and could be applied on all kinds of electrical medical implants, even if its implementation might be challenging. PMID:27660602

Capacitive Feedthroughs for Medical Implants.

PubMed

Grob, Sven; Tass, Peter A; Hauptmann, Christian

2016-01-01

Important technological advances in the last decades paved the road to a great success story for electrically stimulating medical implants, including cochlear implants or implants for deep brain stimulation. However, there are still many challenges in reducing side effects and improving functionality and comfort for the patient. Two of the main challenges are the wish for smaller implants on one hand, and the demand for more stimulation channels on the other hand. But these two aims lead to a conflict of interests. This paper presents a novel design for an electrical feedthrough, the so called capacitive feedthrough, which allows both reducing the size, and increasing the number of included channels. Capacitive feedthroughs combine the functionality of a coupling capacitor and an electrical feedthrough within one and the same structure. The paper also discusses the progress and the challenges of the first produced demonstrators. The concept bears a high potential in improving current feedthrough technology, and could be applied on all kinds of electrical medical implants, even if its implementation might be challenging.

Conflict and Education Demand in the Basque Region

ERIC Educational Resources Information Center

de Groot, Olaf J.; Goksel, Idil

2011-01-01

The relationship between conflict and education has been studied before. However, previous authors have always focused strongly on the supply-side effects, whereas this article examines the influence of conflict on the demand for education. It is theoretically shown that, under relatively general conditions, individuals living in a conflict area…

Software on Demand: An Early Childhood Numeracy Partnership

ERIC Educational Resources Information Center

Egan, Mike; Hengst, Randy

2012-01-01

In collaboration with preservice elementary teachers and in-service kindergarten teachers, the authors engaged in small-scale, demand-side production of educational software focused on numeracy skills. That is, the authors built applications designed to address children's specific learning needs as they surfaced in the classroom and were…

Importance of food-demand management for climate mitigation

NASA Astrophysics Data System (ADS)

Bajželj, Bojana; Richards, Keith S.; Allwood, Julian M.; Smith, Pete; Dennis, John S.; Curmi, Elizabeth; Gilligan, Christopher A.

2014-10-01

Recent studies show that current trends in yield improvement will not be sufficient to meet projected global food demand in 2050, and suggest that a further expansion of agricultural area will be required. However, agriculture is the main driver of losses of biodiversity and a major contributor to climate change and pollution, and so further expansion is undesirable. The usual proposed alternative--intensification with increased resource use--also has negative effects. It is therefore imperative to find ways to achieve global food security without expanding crop or pastureland and without increasing greenhouse gas emissions. Some authors have emphasized a role for sustainable intensification in closing global `yield gaps' between the currently realized and potentially achievable yields. However, in this paper we use a transparent, data-driven model, to show that even if yield gaps are closed, the projected demand will drive further agricultural expansion. There are, however, options for reduction on the demand side that are rarely considered. In the second part of this paper we quantify the potential for demand-side mitigation options, and show that improved diets and decreases in food waste are essential to deliver emissions reductions, and to provide global food security in 2050.

Meeting China's electricity needs through clean energy sources: A 2030 low-carbon energy roadmap

NASA Astrophysics Data System (ADS)

Hu, Zheng

China is undergoing rapid economic development that generates significant increase in energy demand, primarily for electricity. Energy supply in China is heavily relying on coal, which leads to high carbon emissions. This dissertation explores opportunities for meeting China's growing power demand through clean energy sources. The utilization of China's clean energy sources as well as demand-side management is still at the initial phase. Therefore, development of clean energy sources would require substantial government support in order to be competitive in the market. One of the widely used means to consider clean energy in power sector supplying is Integrated Resource Strategic Planning, which aims to minimize the long term electricity costs while screening various power supply options for the power supply and demand analysis. The IRSP tool tackles the energy problem from the perspective of power sector regulators, and provides different policy scenarios to quantify the impacts of combined incentives. Through three scenario studies, Business as Usual, High Renewable, and Renewable and Demand Side Management, this dissertation identifies the optimized scenario for China to achieve the clean energy target of 2030. The scenarios are assessed through energy, economics, environment, and equity dimensions.

Intermediary Organizations in Charter School Policy Coalitions: Evidence from New Orleans

ERIC Educational Resources Information Center

DeBray, Elizabeth; Scott, Janelle; Lubienski, Christopher; Jabbar, Huriya

2014-01-01

This article develops a framework for investigating research use, using an "advocacy coalition framework" and the concepts of a "supply side" (mainly organizations) and "demand side" (policymakers). Drawing on interview data and documents from New Orleans about the charter school reforms that have developed there…

Neo-Keynesian Economics Today.

ERIC Educational Resources Information Center

Shackleton, J. R.

1987-01-01

Traces the development of post-Keynesian economic theories and examines the arguments which surround current neo-Keynesian thought. Argues for an eclecticism which recognizes that both supply-side and demand-side factors have a role to play in determining levels of output and employment. Useful charts and diagrams are included. (Author/DH)

Integrating Demand-Side Resources into the Electric Grid: Economic and Environmental Considerations

NASA Astrophysics Data System (ADS)

Fisher, Michael J.

Demand-side resources are taking an increasingly prominent role in providing essential grid services once provided by thermal power plants. This thesis considers the economic feasibility and environmental effects of integrating demand-side resources into the electric grid with consideration given to the diversity of market and environmental conditions that can affect their behavior. Chapter 2 explores the private economics and system-level carbon dioxide reduction when using demand response for spinning reserve. Steady end uses like lighting are more than twice as profitable as seasonal end uses because spinning reserve is needed year-round. Avoided carbon emission damages from using demand response instead of fossil fuel generation for spinning reserve are sufficient to justify incentives for demand response resources. Chapter 3 quantifies the system-level net emissions rate and private economics of behind-the-meter energy storage. Net emission rates are lower than marginal emission rates for power plants and in-line with estimates of net emission rates from grid-level storage. The economics are favorable for many buildings in regions with high demand charges like California and New York, even without subsidies. Future penetration into regions with average charges like Pennsylvania will depend greatly on installation cost reductions and wholesale prices for ancillary services. Chapter 4 outlines a novel econometric model to quantify potential revenues from energy storage that reduces demand charges. The model is based on a novel predictive metric that is derived from the building's load profile. Normalized revenue estimates are independent of the power capacity of the battery holding other performance characteristics equal, which can be used to calculate the profit-maximizing storage size. Chapter 5 analyzes the economic feasibility of flow batteries in the commercial and industrial market. Flow batteries at a 4-hour duration must be less expensive on a dollar per installed kWh basis, often by 20-30%, to break even with shorter duration li-ion or lead-acid despite allowing for deeper depth of discharge and superior cycle life. These results are robust to assumptions of tariff rates, battery round-trip efficiencies, amount of solar generation and whether the battery can participate in the wholesale energy and ancillary services markets.

Eliminating Electricity Deficit through Energy Efficiency in India: An Evaluation of Aggregate Economic and Carbon Benefits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathaye, Jayant; Gupta, Arjun

2010-04-30

Electricity demand has consistently exceeded available supply in India. While the electricity deficit varies across states, nationally it was estimated to be of the order of 12percent on peak and 11percent for electricity during 2008-09. This paper explores a demand-side focused potential for energy efficiency improvement to eliminate the electricity deficit compared to a business as usual (BAU) supply-side focused scenario. The limited availability of finance and other legal and administrative barriers have constrained the construction of new power plant capacity in India. As a result, under the BAU scenario, India continues to face an electricity deficit beyond the endmore » of the Twelfth Five Year Plan. The demand-side cost-effective potential achieved through replacement of new electricity-using products, however, is large enough to eliminate the deficit as early as 2013 and subsequently reduce the future construction of power plants and thus reduce air pollutant emissions. Moreover, energy efficiency improvements cost a fraction of the cost for new supply and can lead to a substantial increase in India's economic output or gross domestic product (GDP). Eliminating the deficit permits businesses that have experienced electricity cutbacks to restore production. We estimate the size of the cumulative production increase in terms of the contribution to GDP at a $505 billion between 2009 and 2017, the end of India's Twelfth Five Year Plan, which may be compared with India's 2007-08 GDP of $911 billion. The economic output is influenced by the size of the electricity savings and rate of penetration of energy efficient technologies, and that of self-generation equipment and inverters used by businesses faced with electricity cuts. Generation and inverters are estimated to service 23percent of these customers in 2009, which increase to 48percent by 2020. The reduction in the construction and operation of new power plants reduces the cumulative CO2 emissions by 65 Mt, and those of sulfur dioxide and nitrogen oxides by 0.4 Mt each, while also reducing India's imports of coal and natural gas. By 2020, the cumulative GDP benefit increases to $608 billion, the CO2 savings expand to 333 Mt and SO2 and NOx to 2.1 Mt.« less

Innovative Technologies for Efficient Pharmacotherapeutic Management in Space

NASA Technical Reports Server (NTRS)

Putcha, Lakshmi; Daniels, Vernie

2014-01-01

Current and future Space exploration missions and extended human presence in space aboard the ISS will expose crew to risks that differ both quantitatively and qualitatively from those encountered before by space travelers and will impose an unknown risk of safety and crew health. The technology development challenges for optimizing therapeutics in space must include the development of pharmaceuticals with extended stability, optimal efficacy and bioavailability with minimal toxicity and side effects. Innovative technology development goals may include sustained/chronic delivery preventive health care products and vaccines, low-cost high-efficiency noninvasive, non-oral dosage forms with radio-protective formulation matrices and dispensing technologies coupled with self-reliant tracking technologies for quality assurance and quality control assessment. These revolutionary advances in pharmaceutical technology will assure human presence in space and healthy living on Earth. Additionally, the Joint Commission on Accreditation of Healthcare Organizations advocates the use of health information technologies to effectively execute all aspects of medication management (prescribing, dispensing, and administration). The advent of personalized medicine and highly streamlined treatment regimens stimulated interest in new technologies for medication management. Intelligent monitoring devices enhance medication accountability compliance, enable effective drug use, and offer appropriate storage and security conditions for dangerous drug and controlled substance medications in remote sites where traditional pharmacies are unavailable. These features are ideal for Exploration Medical Capabilities. This presentation will highlight current novel commercial off-the-shelf (COTS) intelligent medication management devices for the unique dispensing, therapeutic drug monitoring, medication tracking, and drug delivery demands of exploration space medical operations.

Managed competition in health care and the unfinished agenda

PubMed Central

Enthoven, Alain C.

1986-01-01

A market made up of health care financing and delivery plans and individual consumers, without a carefully drawn set of rules to mitigate market failures, and without mediation by collective action on the demand side, cannot produce efficiency and equity. The concept of competition that can achieve these goals, at least to a satisfactory approximation, is managed competition, with intelligent active agents on the demand side, called sponsors, that contract with the competing health care plans and continuously structure and adjust the market to overcome its tendencies to failure. A great deal remains to be done to achieve the goals envisioned by the “procompetition reformers.” PMID:10311922

Demand and supply of emergency help: an economic analysis of Red Cross services.

PubMed

Hackl, Franz; Pruckner, Gerald Josef

2006-08-01

This paper analyzes supply and demand side characteristics of (voluntary) Red Cross services in Austria. The demand side analysis is based on a contingent valuation study on people's willingness to pay for emergency treatment, transportation services and disaster relief activities. The supply side is identified by a high percentage of volunteers in the Red Cross organization which makes the provision of emergency help at low cost possible. We find that aggregate benefits of Red Cross services exceed their cost of production. Policy conclusions are drawn with respect to future recruitment and funding: whereas intrinsic motivation is important for the decision to volunteer, and financial incentives play a minor role in general, the young Red Cross activists work voluntarily for self-realization reasons and to continue their education. Age-specific recruitment strategies accompanied by word-of-mouth advertising are recommended to address potential volunteers. As long as the volunteering character of Red Cross services will be maintained and cost of production will not go up an increase of funds does not seem necessary in the future. Moreover, a radical change in the structure of funding may crowd out both donations and voluntary labor supply.

The effect of real-time pricing on load shifting in a highly renewable power system dominated by generation from the renewable sources of wind and photovoltaics

NASA Astrophysics Data System (ADS)

Kies, Alexander; Brown, Tom; Schlachtberger, David; Schramm, Stefan

2017-04-01

The supply-demand imbalance is a major concern in the presence of large shares of highly variable renewable generation from sources like wind and photovoltaics (PV) in power systems. Other than the measures on the generation side, such as flexible backup generation or energy storage, sector coupling or demand side management are the most likely option to counter imbalances, therefore to ease the integration of renewable generation. Demand side management usually refers to load shifting, which comprises the reaction of electricity consumers to price fluctuations. In this work, we derive a novel methodology to model the interplay of load shifting and provided incentives via real-time pricing in highly renewable power systems. We use weather data to simulate generation from the renewable sources of wind and photovoltaics, as well as historical load data, split into different consumption categories, such as, heating, cooling, domestic, etc., to model a simplified power system. Together with renewable power forecast data, a simple market model and approaches to incorporate sector coupling [1] and load shifting [2,3], we model the interplay of incentives and load shifting for different scenarios (e.g., in dependency of the risk-aversion of consumers or the forecast horizon) and demonstrate the practical benefits of load shifting. First, we introduce the novel methodology and compare it with existing approaches. Secondly, we show results of numerical simulations on the effects of load shifting: It supports the integration of PV power by providing a storage, which characteristics can be described as "daily" and provides a significant amount of balancing potential. Lastly, we propose an experimental setup to obtain empirical data on end-consumer load-shifting behaviour in response to price incentives. References [1] Brown, T., Schlachtberger, D., Kies. A., Greiner, M., Sector coupling in a highly renewable European energy system, Proc. of the 15th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants, Vienna, Austria, 15.-17. November 2016 [2] Kleinhans, D.: Towards a systematic characterization of the potential of demand side management, arXiv preprint arXiv:1401.4121, 2014 [3] Kies, A., Schyska, B. U., von Bremen, L., The Demand Side Management Potential to Balance a Highly Renewable European Power System. Energies, 9(11), 955, 2016

Track and track-side video survey technology development.

DOT National Transportation Integrated Search

2015-05-01

Researchers at HiDef/Createc have completed prototype development and testing of a novel track video surveying technology : called Track and Track-Side Video Survey (TTVS). TTVS is designed to capture clear video images of the track and track side : ...

The effect of augmented real-time image guidance on task workload during endoscopic sinus surgery.

PubMed

Dixon, Benjamin J; Chan, Harley; Daly, Michael J; Vescan, Allan D; Witterick, Ian J; Irish, Jonathan C

2012-01-01

Due to proximity to critical structures, the need for spatial awareness during endoscopic sinus surgery (ESS) is essential. We have developed an augmented, real-time image-guided surgery (ART-IGS) system that provides live navigational data and proximity alerts to the operating surgeon during ablation. We wished to test the hypothesis that task workload would be reduced when using this technology. A trial involved 8 otolaryngology residents and fellows performing ESS on cadaveric specimens; 1 side in a conventional method (control) and 1 side with ART-IGS. After computed tomography scanning, anatomical contouring, and registration of the head, a three-dimensional (3D) virtual endoscopic view, ablative tool tracking, and proximity alerts were enabled. Each subject completed ESS tasks and rated their workload during and after the exercise using the National Aeronautics and Space Administration (NASA) Task Load Index (TLX). A questionnaire and open feedback interview were completed after the procedure. There was a significant reduction in mental demand, temporal demand, effort, and frustration when using the ART-IGS system in comparison to the control (p < 0.02). Perceived performance was increased (p = 0.02). Most subjects agreed that the system was sufficiently accurate, caused minimal interruption, and increased confidence. Optical tracking line-of-sight issues were frequently cited as the main limitation early in the study; however, this was largely resolved. ART-IGS reduces task workload for trainees performing ESS. Live navigation and alert zones may be a valuable intraoperative teaching aid. Copyright © 2012 American Rhinologic Society-American Academy of Otolaryngic Allergy, LLC.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhattarai, Bishnu; Kouzelis, Konstantinos; Mendaza, Iker

The gradual active load penetration in low voltage distribution grids is expected to challenge their network capacity in the near future. Distribution system operators should for this reason resort to either costly grid reinforcements or to demand side management mechanisms. Since demand side management implementation is usually cheaper, it is also the favorable solution. To this end, this article presents a framework for handling grid limit violations, both voltage and current, to ensure a secure and qualitative operation of the distribution grid. This framework consists of two steps, namely a proactive centralized and subsequently a reactive decentralized control scheme. Themore » former is employed to balance the one hour ahead load while the latter aims at regulating the consumption in real-time. In both cases, the importance of fair use of electricity demand flexibility is emphasized. Thus, it is demonstrated that this methodology aids in keeping the grid status within preset limits while utilizing flexibility from all flexibility participants.« less

International experiences of promoting generics use and its implications to China.

PubMed

Sun, Jing

2013-05-01

To summarize international experiences in promoting use of generics and to extract essence for China's reference. This is a commentary of two systematic reviews about policies to promote use of generics and its implications to China. Price, reimbursement, and generic substitution policies in European countries, and approaches in low and middle income countries in promoting market competition, appropriate intellectual property right protection strategy, and necessary demand side incentives, are all meaningful for China to contain soaring pharmaceutical expenditures, and to maintain the achievements and outcomes of the national health system reform. Effective promotion of generics use must be practice based on the real situation. Tailor-made and comprehensive measures are needed to address both demand and supply sides barriers before achieving tangible cost containment effect without unexpected side effects. © 2013 Wiley Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

Standardized Sample Preparation Using a Drop-on-Demand Printing Platform

DTIC Science & Technology

2013-05-07

successful and robust methodology for energetic sample preparation. Keywords: drop-on-demand; inkjet printing; sample preparation OPEN ACCESS...on a similar length scale. Recently, drop-on-demand inkjet printing technology has emerged as an effective approach to produce test materials to...which most of the material is concentrated along the edges, samples prepared using drop-on-demand inkjet technology demonstrate excellent uniform

The Supply and Demand of Accounting Faculty by Interest Area.

ERIC Educational Resources Information Center

Norris, Daniel

1991-01-01

Position advertisements in "The Accounting Review" and data on numbers of doctoral accounting faculty are used to assess the accounting job market, by interest area, over the past decade. Determines that current trends in the demand side are expected to continue, with auditing and systems the "hot" areas. (Author/JOW)

Health consumers and stem cell therapy innovation: markets, models and regulation.

PubMed

Salter, Brian; Zhou, Yinhua; Datta, Saheli

2014-05-01

Global health consumer demand for stem cell therapies is vibrant, but the supply of treatments from the conventional science-based model of innovation is small and unlikely to increase in the near future. At the same time, several models of medical innovation have emerged that can respond to the demand, often employing a transnational value chain to deliver the product. Much of the commentary has approached the issue from a supply side perspective, demonstrating the extent to which national and transnational regulation fails to impose what are regarded as appropriate standards on the 'illicit' supply of stem cell therapies characterized by little data and poor outcomes. By contrast, this article presents a political economic analysis with a strong demand side perspective, arguing that the problem of what is termed 'stem cell tourism' is embedded in the demand-supply relationship of the health consumer market and its engagement with different types of stem cell therapy innovation. To be meaningful, discussions of regulation must recognize that analysis or risk being sidelined by a market, which ignores their often wishful thinking.

"De facto" Privatisation of Education and the Poor: Implications of a Study from Sub-Saharan Africa and India

ERIC Educational Resources Information Center

Tooley, James; Dixon, Pauline

2006-01-01

Three types of privatisation are identified--involving demand-side financing, reforms to the educational supply-side and "de facto" privatisation, where responsibilities are transferred to the private sector, through the rapid growth of private schools, rather than through reform or legislation. Although "de facto"…

Institutional Diversity in Russian Higher Education: Revolutions and Evolution

ERIC Educational Resources Information Center

Froumin, Isak; Kouzminov, Yaroslav; Semyonov, Dmitry

2014-01-01

This paper is devoted to changes in the structure of the higher education system in Russia, analysing both historical context and current institutional diversity. The review starts from the Soviet quasi-corporate system when the state combined demand-side and supply-side roles in higher education. The post-Soviet transformation brings new forces…

Research on Future Skill Demands: A Workshop Summary

ERIC Educational Resources Information Center

Hilton, Margaret

2008-01-01

Over the past five years, business and education groups have issued a series of reports indicating that the skill demands of work are rising, due to rapid technological change and increasing global competition. Researchers have begun to study changing workplace skill demands. Some economists have found that technological change is…

The impact of changing technology on the demand for air transportation

NASA Technical Reports Server (NTRS)

Kneafsey, J. T.; Taneja, N. K.

1978-01-01

Demand models for air transportation that are sensitive to the impact of changing technology were developed. The models are responsive to potential changes in technology, and to changing economic, social, and political factors as well. In addition to anticipating the wide differences in the factors influencing the demand for long haul and short haul air travel, the models were designed to clearly distinguish among the unique features of these markets.

Equity of access to primary healthcare for vulnerable populations: the IMPACT international online survey of innovations.

PubMed

Richard, Lauralie; Furler, John; Densley, Konstancja; Haggerty, Jeannie; Russell, Grant; Levesque, Jean-Frederic; Gunn, Jane

2016-04-12

Improving access to primary healthcare (PHC) for vulnerable populations is important for achieving health equity, yet this remains challenging. Evidence of effective interventions is rather limited and fragmented. We need to identify innovative ways to improve access to PHC for vulnerable populations, and to clarify which elements of health systems, organisations or services (supply-side dimensions of access) and abilities of patients or populations (demand-side dimensions of access) need to be strengthened to achieve transformative change. The work reported here was conducted as part of IMPACT (Innovative Models Promoting Access-to-Care Transformation), a 5-year Canadian-Australian research program aiming to identify, implement and trial best practice interventions to improve access to PHC for vulnerable populations. We undertook an environmental scan as a broad screening approach to identify the breadth of current innovations from the field. We distributed a brief online survey to an international audience of PHC researchers, practitioners, policy makers and stakeholders using a combined email and social media approach. Respondents were invited to describe a program, service, approach or model of care that they considered innovative in helping vulnerable populations to get access to PHC. We used descriptive statistics to characterise the innovations and conducted a qualitative framework analysis to further examine the text describing each innovation. Seven hundred forty-four responses were recorded over a 6-week period. 240 unique examples of innovations originating from 14 countries were described, the majority from Canada and Australia. Most interventions targeted a diversity of population groups, were government funded and delivered in a community health, General Practice or outreach clinic setting. Interventions were mainly focused on the health sector and directed at organisational and/or system level determinants of access (supply-side). Few innovations were developed to enhance patients' or populations' abilities to access services (demand-side), and rarely did initiatives target both supply- and demand-side determinants of access. A wide range of innovations improving access to PHC were identified. The access framework was useful in uncovering the disparity between supply- and demand-side dimensions and pinpointing areas which could benefit from further attention to close the equity gap for vulnerable populations in accessing PHC services that correspond to their needs.

Achieving CO 2 reductions in Colombia: Effects of carbon taxes and abatement targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calderón, Silvia; Alvarez, Andres Camilo; Loboguerrero, Ana Maria

In this paper we investigate CO 2 emission scenarios for Colombia and the effects of implementing carbon taxes and abatement targets on the energy system. By comparing baseline and policy scenario results from two integrated assessment partial equilibrium models TIAM-ECN and GCAM and two general equilibrium models Phoenix and MEG4C, we provide an indication of future developments and dynamics in the Colombian energy system. Currently, the carbon intensity of the energy system in Colombia is low compared to other countries in Latin America. However, this trend may change given the projected rapid growth of the economy and the potential increasemore » in the use of carbon-based technologies. Climate policy in Colombia is under development and has yet to consider economic instruments such as taxes and abatement targets. This paper shows how taxes or abatement targets can achieve significant CO 2 reductions in Colombia. Though abatement may be achieved through different pathways, taxes and targets promote the entry of cleaner energy sources into the market and reduce final energy demand through energy efficiency improvements and other demand-side responses. The electric power sector plays an important role in achieving CO 2 emission reductions in Colombia, through the increase of hydropower, the introduction of wind technologies, and the deployment of biomass, coal and natural gas with CO 2 capture and storage (CCS). Uncertainty over the prevailing mitigation pathway reinforces the importance of climate policy to guide sectors toward low-carbon technologies. This paper also assesses the economy-wide implications of mitigation policies such as potential losses in GDP and consumption. As a result, an assessment of the legal, institutional, social and environmental barriers to economy-wide mitigation policies is critical yet beyond the scope of this paper.« less

Achieving CO 2 reductions in Colombia: Effects of carbon taxes and abatement targets

DOE PAGES

Calderón, Silvia; Alvarez, Andres Camilo; Loboguerrero, Ana Maria; ...

2015-06-03

In this paper we investigate CO 2 emission scenarios for Colombia and the effects of implementing carbon taxes and abatement targets on the energy system. By comparing baseline and policy scenario results from two integrated assessment partial equilibrium models TIAM-ECN and GCAM and two general equilibrium models Phoenix and MEG4C, we provide an indication of future developments and dynamics in the Colombian energy system. Currently, the carbon intensity of the energy system in Colombia is low compared to other countries in Latin America. However, this trend may change given the projected rapid growth of the economy and the potential increasemore » in the use of carbon-based technologies. Climate policy in Colombia is under development and has yet to consider economic instruments such as taxes and abatement targets. This paper shows how taxes or abatement targets can achieve significant CO 2 reductions in Colombia. Though abatement may be achieved through different pathways, taxes and targets promote the entry of cleaner energy sources into the market and reduce final energy demand through energy efficiency improvements and other demand-side responses. The electric power sector plays an important role in achieving CO 2 emission reductions in Colombia, through the increase of hydropower, the introduction of wind technologies, and the deployment of biomass, coal and natural gas with CO 2 capture and storage (CCS). Uncertainty over the prevailing mitigation pathway reinforces the importance of climate policy to guide sectors toward low-carbon technologies. This paper also assesses the economy-wide implications of mitigation policies such as potential losses in GDP and consumption. As a result, an assessment of the legal, institutional, social and environmental barriers to economy-wide mitigation policies is critical yet beyond the scope of this paper.« less

Influence of field size on the physiological and skill demands of small-sided games in junior and senior rugby league players.

PubMed

Gabbett, Tim J; Abernethy, Bruce; Jenkins, David G

2012-02-01

The purpose of this study was to investigate the effect of changes in field size on the physiological and skill demands of small-sided games in elite junior and senior rugby league players. Sixteen elite senior rugby league players ([mean ± SE] age, 23.6 ± 0.5 years) and 16 elite junior rugby league players ([mean ± SE] age, 17.3 ± 0.3 years) participated in this study. On day 1, 2 teams played an 8-minute small-sided game on a small field (10-m width × 40-m length), whereas the remaining 2 teams played the small-sided game on a larger sized field (40-m width × 70-m length). On day 2, the groups were crossed over. Movement was recorded by a global positioning system unit sampling at 5 Hz. Games were filmed to count the number of possessions and the number and quality of disposals. The games played on a larger field resulted in a greater (p < 0.05) total distance covered, and distances covered in moderate, high, and very-high velocity movement intensities. Senior players covered more distance at moderate, high, and very-high intensities, and less distance at low and very-low intensities during small-sided games than junior players. Although increasing field size had no significant influence (p > 0.05) over the duration of recovery periods for junior players, larger field size significantly reduced (p < 0.05) the amount of short-, moderate-, and long-duration recovery periods in senior players. No significant between-group differences (p > 0.05) were detected for games played on a small or large field for the number or quality of skill involvements. These results suggest that increases in field size serve to increase the physiological demands of small-sided games but have minimal influence over the volume or quality of skill executions in elite rugby league players.

The peer review system (PRS) for quality assurance and treatment improvement in radiation therapy

NASA Astrophysics Data System (ADS)

Le, Anh H. T.; Kapoor, Rishabh; Palta, Jatinder R.

2012-02-01

Peer reviews are needed across all disciplines of medicine to address complex medical challenges in disease care, medical safety, insurance coverage handling, and public safety. Radiation therapy utilizes technologically advanced imaging for treatment planning, often with excellent efficacy. Since planning data requirements are substantial, patients are at risk for repeat diagnostic procedures or suboptimal therapeutic intervention due to a lack of knowledge regarding previous treatments. The Peer Review System (PRS) will make this critical radiation therapy information readily available on demand via Web technology. The PRS system has been developed with current Web technology, .NET framework, and in-house DICOM library. With the advantages of Web server-client architecture, including IIS web server, SOAP Web Services and Silverlight for the client side, the patient data can be visualized through web browser and distributed across multiple locations by the local area network and Internet. This PRS will significantly improve the quality, safety, and accessibility, of treatment plans in cancer therapy. Furthermore, the secure Web-based PRS with DICOM-RT compliance will provide flexible utilities for organization, sorting, and retrieval of imaging studies and treatment plans to optimize the patient treatment and ultimately improve patient safety and treatment quality.

Optimal Multi-scale Demand-side Management for Continuous Power-Intensive Processes

NASA Astrophysics Data System (ADS)

Mitra, Sumit

With the advent of deregulation in electricity markets and an increasing share of intermittent power generation sources, the profitability of industrial consumers that operate power-intensive processes has become directly linked to the variability in energy prices. Thus, for industrial consumers that are able to adjust to the fluctuations, time-sensitive electricity prices (as part of so-called Demand-Side Management (DSM) in the smart grid) offer potential economical incentives. In this thesis, we introduce optimization models and decomposition strategies for the multi-scale Demand-Side Management of continuous power-intensive processes. On an operational level, we derive a mode formulation for scheduling under time-sensitive electricity prices. The formulation is applied to air separation plants and cement plants to minimize the operating cost. We also describe how a mode formulation can be used for industrial combined heat and power plants that are co-located at integrated chemical sites to increase operating profit by adjusting their steam and electricity production according to their inherent flexibility. Furthermore, a robust optimization formulation is developed to address the uncertainty in electricity prices by accounting for correlations and multiple ranges in the realization of the random variables. On a strategic level, we introduce a multi-scale model that provides an understanding of the value of flexibility of the current plant configuration and the value of additional flexibility in terms of retrofits for Demand-Side Management under product demand uncertainty. The integration of multiple time scales leads to large-scale two-stage stochastic programming problems, for which we need to apply decomposition strategies in order to obtain a good solution within a reasonable amount of time. Hence, we describe two decomposition schemes that can be applied to solve two-stage stochastic programming problems: First, a hybrid bi-level decomposition scheme with novel Lagrangean-type and subset-type cuts to strengthen the relaxation. Second, an enhanced cross-decomposition scheme that integrates Benders decomposition and Lagrangean decomposition on a scenario basis. To demonstrate the effectiveness of our developed methodology, we provide several industrial case studies throughout the thesis.

The dark side of technologies: technostress among users of information and communication technologies.

PubMed

Salanova, Marisa; Llorens, Susana; Cifre, Eva

2013-01-01

This paper tests the structure and the predictors of two psychological experiences of technostress associated with the use of information and communication technologies (ICT), i.e., technostrain (users report feelings of anxiety, fatigue, scepticism and inefficacy beliefs related to the use of technologies) and technoaddiction (users feel bad due to an excessive and compulsive use of these technologies). The study included a sample of 1072 ICT users (N = 675 nonintensive ICT users and N = 397 intensive ICT users). Results from multigroup confirmatory factor analyses among non-intensive and intensive ICT users showed, as expected, the four-factor structure of technostrain in both samples. Secondly, and also as expected, confirmatory factorial analyses revealed that technostress experiences are characterized not only by technostrain but also by an excessive and compulsive use of ICT. Moreover, multiple analyses of variance showed significant differences between non-intensive and intensive ICT users (1) in the dimensions of technostress and (2) in specific job demands and job/personal resources. Finally, linear multiple regression analyses revealed that technostrain is positively predicted by work overload, role ambiguity, emotional overload, mobbing and obstacles hindering ICT use, as well as by lack of autonomy, transformational leadership, social support, ICT use facilitators and mental competences. Work overload, role ambiguity and mobbing, as well as the lack of emotional competences, positively predict technoaddiction. Theoretical and practical implications, in addition to future research, are discussed.

Potential point of care tests (POCTs) for maternal health in Peru, perspectives of pregnant women and their partners

PubMed Central

2014-01-01

Background Globally, no qualitative studies have explored the perspectives of women and their partners about the integration of technology – and specifically diagnostic testing technologies – into antenatal care. The study objective was to describe the demand side for pregnancy-related diagnostic tests from the perspective of Peruvian consumers, including female and male community members, by engaging participants about their awareness of and care-seeking for pregnancy-related diagnostic tests and their preferred characteristics and testing conditions for pregnancy-related point-of-care diagnostic tests (POCTs). Methods Sixty-seven mothers and fathers of children under one from the peri-urban coast and the peri-urban and rural highlands and jungle of Peru participated in ten focus groups. Results Participants think that pregnancy-related diagnostic tests are important and they and their fellow community members are committed to ensuring that pregnant women receive the tests they need. Participants expressed clear demands for pregnancy-related POCTs, including important characteristics for the tests themselves (certification, rapid, reliable results) and for test implementation (well-trained, personable good communicators as test administrators at well-equipped, convenient testing sites). Participants emphasized the importance of short waiting times and explained that many people have some ability to pay for POCTs, particularly if they are innovative, rapid or multiplex. Conclusions Engaging future POCT users as consumers who are able to make key decisions about the development and implementation of pregnancy-related POCTs is valuable and informative. PMID:24433514

Food security and sustainable intensification.

PubMed

Godfray, H Charles J; Garnett, Tara

2014-04-05

The coming decades are likely to see increasing pressures on the global food system, both on the demand side from increasing population and per capita consumption, and on the supply side from greater competition for inputs and from climate change. This paper argues that the magnitude of the challenge is such that action is needed throughout the food system, on moderating demand, reducing waste, improving governance and producing more food. It discusses in detail the last component, arguing that more food should be produced using sustainable intensification (SI) strategies, and explores the rationale behind, and meaning of, this term. It also investigates how SI may interact with other food policy agendas, in particular, land use and biodiversity, animal welfare and human nutrition.

Adaptive heat pump and battery storage demand side energy management

NASA Astrophysics Data System (ADS)

Sobieczky, Florian; Lettner, Christian; Natschläger, Thomas; Traxler, Patrick

2017-11-01

An adaptive linear model predictive control strategy is introduced for the problem of demand side energy management, involving a photovoltaic device, a battery, and a heat pump. Moreover, the heating influence of solar radiation via the glass house effect is considered. Global sunlight radiation intensity and the outside temperature are updated by weather forecast data. The identification is carried out after adapting to a time frame witch sufficiently homogeneous weather. In this way, in spite of the linearity an increase in precision and cost reduction of up to 46% is achieved. It is validated for an open and closed loop version of the MPC problem using real data of the ambient temperature and the global radiation.

Integrated power sector efficiency analysis: A case study of Costa Rica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waddle, D.B.; MacDonald, J.M.

1990-03-01

In an effort to analyze and document the potential for power sector efficiency improvements from generation to end-use, the Agency for International Development and the Government of Costa Rica are jointly conducting an integrated power sector efficiency analysis. Potential for energy and cost savings in power plants, transmission and distribution, and demand-side management programs are being evaluated. The product of this study will be an integrated investment plan for the Instituto Costarricense de Electricidad, incorporating both supply and demand side investment options. This paper presents the methodology employed in the study, as well as preliminary estimates of the results ofmore » the study. 14 refs., 2 figs., 5 tabs.« less

Electric power market agent design

NASA Astrophysics Data System (ADS)

Oh, Hyungseon

The electric power industry in many countries has been restructured in the hope of a more economically efficient system. In the restructured system, traditional operating and planning tools based on true marginal cost do not perform well since information required is strictly confidential. For developing a new tool, it is necessary to understand offer behavior. The main objective of this study is to create a new tool for power system planning. For the purpose, this dissertation develops models for a market and market participants. A new model is developed in this work for explaining a supply-side offer curve, and several variables are introduced to characterize the curve. Demand is estimated using a neural network, and a numerical optimization process is used to determine the values of the variables that maximize the profit of the agent. The amount of data required for the optimization is chosen with the aid of nonlinear dynamics. To suggest an optimal demand-side bidding function, two optimization problems are constructed and solved for maximizing consumer satisfaction based on the properties of two different types of demands: price-based demand and must-be-served demand. Several different simulations are performed to test how an agent reacts in various situations. The offer behavior depends on locational benefit as well as the offer strategies of competitors.

Performance of fasteners in wood flour-thermoplastic composite panels

Treesearch

Robert H. Falk; Daniel J. Vos; Steven M. Cramer; Brent W. English

2001-01-01

In the building community, there is a growing demand for high-performance, low-maintenance, and low-cost building products. To meet this demand, natural fiberthermoplastic composites are being used to produce such products as decking, window and door elements, panels, roofing, and siding. In spite of the rapid growth in the use of these composites, little is known...

High Expectations--High Achievement on Literacy: "What Shall We Do in This Hangman's Hour?"

ERIC Educational Resources Information Center

Linnakyla, Pirjo

Finland is a country of great expectations on literacy and literacy education. High expectations and demands have, however, a darker side. High expectations of society, parents, and teachers may have an effect on the students' self-esteem. The economic recession in the early 1990s strongly accelerated the change in literacy demands and…

Education: A Solution for Rural Poverty? Staff Paper 350.

ERIC Educational Resources Information Center

Clouser, Rodney L.

This paper presents an overview of poverty in rural America, and examines the ways in which improved education could alleviate rural poverty. The question of education as a mechanism to reduce poverty includes issues of economic demand and supply. On the demand side, labor market projections indicate that the service sector will continue to grow,…

[Recent advances of anastomosis techniques of esophagojejunostomy after laparoscopic totally gastrectomy in gastric tumor].

PubMed

Li, Xi; Ke, Chongwei

2015-05-01

The esophageal jejunum anastomosis of the digestive tract reconstruction techniques in laparoscopic total gastrectomy includes two categories: circular stapler anastomosis techniques and linear stapler anastomosis techniques. Circular stapler anastomosis techniques include manual anastomosis method, purse string instrument method, Hiki improved special anvil anastomosis technique, the transorally inserted anvil(OrVil(TM)) and reverse puncture device technique. Linear stapler anastomosis techniques include side to side anastomosis technique and Overlap side to side anastomosis technique. Esophageal jejunum anastomosis technique has a wide selection of different technologies with different strengths and the corresponding limitations. This article will introduce research progress of laparoscopic total gastrectomy esophagus jejunum anastomosis from both sides of the development of anastomosis technology and the selection of anastomosis technology.

Evaluation of Side Stream Filtration Technology at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Brian K.

2014-08-01

This technology evaluation was performed by Pacific Northwest National Laboratory and Oak Ridge National Laboratory on behalf of the Federal Energy Management Program. The objective was to quantify the benefits side stream filtration provides to a cooling tower system. The evaluation assessed the performance of an existing side stream filtration system at a cooling tower system at Oak Ridge National Laboratory’s Spallation Neutron Source research facility. This location was selected because it offered the opportunity for a side-by-side comparison of a system featuring side stream filtration and an unfiltered system.

75 FR 18572 - Supplemental Environmental Impact Statement for Sequoyah Nuclear Plant Units 1 and 2 License...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-12

... the carbon emissions of its generating system and take advantage of lower carbon dioxide-emitting.... The SEIS will include examination of a range of supply-side and demand- side management options for... both the scope of alternatives and environmental issues that should be addressed as part of the SEIS...

Residents and urban greenways:  Modeling support for the Atlanta BeltLine

Treesearch

Nathan P. Palardy; B. Bynum Boley; Cassandra Johnson Gaither

2018-01-01

Urban greenways have received significant attention due to their many publicized benefits and costs that make them contentious recreational developments. Most prior studies have approached urban greenways from a demand-side perspective solely focused on their users. This study adds to the literature by taking a supply-side approach to assessing resident attitudes...

Descentralizacion de la educacion: Financiamiento basado en la demanda. Tendencias del Desarrollo. (Decentralization of Education: Demand-Side Financing. Directions in Development.)

ERIC Educational Resources Information Center

Patrinos, Harry Anthony; Ariasingam, David Lakshmanan

Central government's supply-side expansions of schooling have not equally benefited all members of society, especially girls, indigenous peoples, tribal groups, disadvantaged minorities, and the poor. Public spending on education is often inefficient, higher education is subsidized at primary education's expense, and costs are becoming…

Disadvantaged Young People Accessing the New Urban Economies of the Post-Industrial City

ERIC Educational Resources Information Center

Raffo, Carlo

2006-01-01

The aim of the paper is to examine current and evolving supply side transition policy initiatives in the light of (a) particular demand side needs of urban young people classified as those most disadvantaged and potentially marginalized; and (b) the emerging realities of accessing and operating within particular examples of high value-added…

Selection of Server-Side Technologies for an E-Business Curriculum

ERIC Educational Resources Information Center

Sandvig, J. Christopher

2007-01-01

The rapid growth of e-business and e-commerce has made server-side programming an increasingly important topic in information systems (IS) and computer science (CS) curricula. This article presents an overview of the major features of several popular server-side programming technologies and discusses the factors that influence the selection of…

Multi-Criteria Evaluation Approach for E-Learning Technologies: Selection Criteria Using AHP

ERIC Educational Resources Information Center

Zaied, Abdel Nasser

2012-01-01

Universities are facing the pressures from globalization and the knowledge society, which demand experience with technology; different skills; and different learning experiences. These demands place universities in a difficult position, and to a certain extent, they are forced to explore and adopt new learning technologies that accommodate…

The planning and implementation of a demand-side management/distribution automation system at Taiwan Power Company

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, S.S.; Chen, Yun-Wu

1994-12-31

This paper would describe the Taipower`s experience of DSM/DAS development. For the past 5 years, the demand of electricity has maintained a high annual growth rate of 8.45% due to economic prosperity in Taiwan. As the environmental protection consciousness has recently made Taipower difficult to develope and construct new power plants, substations, transmission and distribution lines, and our power grid is an independent system, we do need to concern how to do DSM to manage the load problems. Since 1984, Taipower has established two pilot systems and these systems performed the functions of fault detect and isolation certainly good formore » Distribution Automation. With the rapid development of computer, communication and control technology, the concept of the DAS has gradually been implemented in real cases. Taipower organized an engineering task group to study DAS several years ago, and based on the operation experience of the existing systems, today Taipower is planning to launch a new DAS project for Tai-Chung area. According to Taipower requirements, the DAS will have the functions of feeder automation, automatic meter reading, load management and disteibution system analysis.« less

Influence of game format and number of players on heart rate responses and physical demands in small-sided soccer games.

PubMed

Castellano, Julen; Casamichana, David; Dellal, Alexandre

2013-05-01

The aim of the study was to examine the extent to which changing the game format (possession play vs. regulation goals and goalkeepers vs. small goals only) and the number of players (3 vs. 3, 5 vs. 5 and 7 vs. 7) influenced the physiological and physical demands of small-sided games (SSGs) in soccer in semiprofessional players. Fourteen semiprofessional male soccer players were monitored with global positioning system and heart rate devices. Heart rate, player load, distance covered, running speed, and the number of accelerations were recorded for 9 different SSGs. The results show that changes both in game format and the number of players affect the players' physiological and physical demands. Possession play places greater physiological and physical demands on players, although reducing the number of players only increases the physiological load. In the 7 vs. 7 games, changing the game format did not alter the heart rate responses. Finally, in the possession play format, changing the number of players did not produce significant differences in heart rate responses, although physical demands did decrease in line with a reduction in the number of players. These results should help coaches to understand how modifying different aspects of SSGs has a differential effect on the players' physiological and physical demands. Moreover, coaches in semiprofessional and amateur teams have now consistent information to design and optimize their training time in mixing the technical, tactical, and physical aspects.

Simulation of demand management and grid balancing with electric vehicles

NASA Astrophysics Data System (ADS)

Druitt, James; Früh, Wolf-Gerrit

2012-10-01

This study investigates the potential role of electric vehicles in an electricity network with a high contribution from variable generation such as wind power. Electric vehicles are modelled to provide demand management through flexible charging requirements and energy balancing for the network. Balancing applications include both demand balancing and vehicle-to-grid discharging. This study is configured to represent the UK grid with balancing requirements derived from wind generation calculated from weather station wind speeds on the supply side and National Grid data from on the demand side. The simulation models 1000 individual vehicle entities to represent the behaviour of larger numbers of vehicles. A stochastic trip generation profile is used to generate realistic journey characteristics, whilst a market pricing model allows charging and balancing decisions to be based on realistic market price conditions. The simulation has been tested with wind generation capacities representing up to 30% of UK consumption. Results show significant improvements to load following conditions with the introduction of electric vehicles, suggesting that they could substantially facilitate the uptake of intermittent renewable generation. Electric vehicle owners would benefit from flexible charging and selling tariffs, with the majority of revenue derived from vehicle-to-grid participation in balancing markets.

Smart Grid Constraint Violation Management for Balancing and Regulating Purposes

DOE PAGES

Bhattarai, Bishnu; Kouzelis, Konstantinos; Mendaza, Iker; ...

2017-03-29

The gradual active load penetration in low voltage distribution grids is expected to challenge their network capacity in the near future. Distribution system operators should for this reason resort to either costly grid reinforcements or to demand side management mechanisms. Since demand side management implementation is usually cheaper, it is also the favorable solution. To this end, this article presents a framework for handling grid limit violations, both voltage and current, to ensure a secure and qualitative operation of the distribution grid. This framework consists of two steps, namely a proactive centralized and subsequently a reactive decentralized control scheme. Themore » former is employed to balance the one hour ahead load while the latter aims at regulating the consumption in real-time. In both cases, the importance of fair use of electricity demand flexibility is emphasized. Thus, it is demonstrated that this methodology aids in keeping the grid status within preset limits while utilizing flexibility from all flexibility participants.« less

An integrated communications demand model

NASA Astrophysics Data System (ADS)

Doubleday, C. F.

1980-11-01

A computer model of communications demand is being developed to permit dynamic simulations of the long-term evolution of demand for communications media in the U.K. to be made under alternative assumptions about social, economic and technological trends in British Telecom's business environment. The context and objectives of the project and the potential uses of the model are reviewed, and four key concepts in the demand for communications media, around which the model is being structured are discussed: (1) the generation of communications demand; (2) substitution between media; (3) technological convergence; and (4) competition. Two outline perspectives on the model itself are given.

Research on Operation Strategy for Bundled Wind-thermal Generation Power Systems Based on Two-Stage Optimization Model

NASA Astrophysics Data System (ADS)

Sun, Congcong; Wang, Zhijie; Liu, Sanming; Jiang, Xiuchen; Sheng, Gehao; Liu, Tianyu

2017-05-01

Wind power has the advantages of being clean and non-polluting and the development of bundled wind-thermal generation power systems (BWTGSs) is one of the important means to improve wind power accommodation rate and implement “clean alternative” on generation side. A two-stage optimization strategy for BWTGSs considering wind speed forecasting results and load characteristics is proposed. By taking short-term wind speed forecasting results of generation side and load characteristics of demand side into account, a two-stage optimization model for BWTGSs is formulated. By using the environmental benefit index of BWTGSs as the objective function, supply-demand balance and generator operation as the constraints, the first-stage optimization model is developed with the chance-constrained programming theory. By using the operation cost for BWTGSs as the objective function, the second-stage optimization model is developed with the greedy algorithm. The improved PSO algorithm is employed to solve the model and numerical test verifies the effectiveness of the proposed strategy.

Does the Type of Higher Education Affect Labor Market Outcomes? Evidence from Egypt and Jordan

ERIC Educational Resources Information Center

Assaad, Ragui; Krafft, Caroline; Salehi-Isfahani, Djavad

2018-01-01

In Egypt and Jordan, there is a substantial mismatch between the output of the higher education system and the needs of the labor market. Both demand and supply-side factors could be driving this mismatch. This paper tests a key supply-side issue, whether differences in the institutional structures and incentives in higher education affect the…

Bolsa Escola: Breaking the Cycle of Poverty, Child Labour and School Disaffection in Brazil

ERIC Educational Resources Information Center

Denes, Christian Andrew

2004-01-01

The Bolsa Escola program in Brazil presents a clear break from the economic growth models and supply-side based strategies of the past. Founded on the assumption that the supplemental income generated by child labour outweighs the potential benefits of primary education, Bolsa Escola attempts to address the demand-side component of high dropout…

The role of nuclear energy in mitigating greenhouse warming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krakowski, R.A.

1997-12-31

A behavioral, top-down, forced-equilibrium market model of long-term ({approximately} 2,100) global energy-economics interactions has been modified with a bottom-up nuclear energy model and used to construct consistent scenarios describing future impacts of civil nuclear materials flows in an expanding, multi-regional (13) world economy. The relative measures and tradeoffs between economic (GNP, tax impacts, productivity, etc.), environmental (greenhouse gas accumulations, waste accumulation, proliferation risk), and energy (resources, energy mixes, supply-side versus demand-side attributes) interactions that emerge from these analyses are focused herein on advancing understanding of the role that nuclear energy (and other non-carbon energy sources) might play in mitigating greenhousemore » warming. Two ostensibly opposing scenario drivers are investigated: (a) demand-side improvements in (non-price-induced) autonomous energy efficiency improvements; and (b) supply-side carbon-tax inducements to shift energy mixes towards reduced- or non-carbon forms. In terms of stemming greenhouse warming for minimal cost of greenhouse-gas abatement, and with the limitations of the simplified taxing schedule used, a symbiotic combination of these two approaches may offer advantages not found if each is applied separately.« less

Dynamic postural control and associated attentional demands in contemporary dancers versus non-dancers

PubMed Central

Sirois-Leclerc, Geneviève; Remaud, Anthony

2017-01-01

Postural control is not a fully automatic process, but requires a certain level of attention, particularly as the difficulty of the postural task increases. This study aimed at testing whether experienced contemporary dancers, because of their specialized training involving the control of posture/balance, would present with a dual-task performance suggesting lesser attentional demands associated with dynamic postural control compared with non-dancers. Twenty dancers and 16 non-dancers performed a dynamic postural tracking task in both antero-posterior and side-to-side directions, while standing on a force platform. The postural task was performed, in turn, 1) as a stand-alone task, and concurrently with both 2) a simple reaction time task and 3) a choice reaction time task. Postural control performance was estimated through variables calculated from centre of pressure movements. Although no overall group difference was found in reaction time values, we found a better ability to control the side to side movements of the centre of pressure during the tracking task in dancers compared with non-dancers, which was dependent on the secondary task. This suggests that such increased ability is influenced by available attentional resources. PMID:28323843

Dynamic postural control and associated attentional demands in contemporary dancers versus non-dancers.

PubMed

Sirois-Leclerc, Geneviève; Remaud, Anthony; Bilodeau, Martin

2017-01-01

Postural control is not a fully automatic process, but requires a certain level of attention, particularly as the difficulty of the postural task increases. This study aimed at testing whether experienced contemporary dancers, because of their specialized training involving the control of posture/balance, would present with a dual-task performance suggesting lesser attentional demands associated with dynamic postural control compared with non-dancers. Twenty dancers and 16 non-dancers performed a dynamic postural tracking task in both antero-posterior and side-to-side directions, while standing on a force platform. The postural task was performed, in turn, 1) as a stand-alone task, and concurrently with both 2) a simple reaction time task and 3) a choice reaction time task. Postural control performance was estimated through variables calculated from centre of pressure movements. Although no overall group difference was found in reaction time values, we found a better ability to control the side to side movements of the centre of pressure during the tracking task in dancers compared with non-dancers, which was dependent on the secondary task. This suggests that such increased ability is influenced by available attentional resources.

The Impact of Technological Change on Manpower and Skill Demand: Case-Study Data and Policy Implications.

ERIC Educational Resources Information Center

Crossman, Edward R. F. W.; Laner, Stephen

To prove or disprove the hypothesis that automation and technological change impose increased skill demands on manufacturing and service industries, case studies were made of a bank and a steel and air products company, and of two oil companies, airlines, and electric power companies. The basic conceptual tool used to measure skill demands was the…

Industrial demand side management: A status report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hopkins, M.F.; Conger, R.L.; Foley, T.J.

This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programsmore » are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.« less

Food security and sustainable intensification

PubMed Central

Godfray, H. Charles J.; Garnett, Tara

2014-01-01

The coming decades are likely to see increasing pressures on the global food system, both on the demand side from increasing population and per capita consumption, and on the supply side from greater competition for inputs and from climate change. This paper argues that the magnitude of the challenge is such that action is needed throughout the food system, on moderating demand, reducing waste, improving governance and producing more food. It discusses in detail the last component, arguing that more food should be produced using sustainable intensification (SI) strategies, and explores the rationale behind, and meaning of, this term. It also investigates how SI may interact with other food policy agendas, in particular, land use and biodiversity, animal welfare and human nutrition. PMID:24535385

Analysis of power sector efficiency improvements for an integrated utility planning process in Costa Rica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waddle, D.B.; MacDonald, J.M.

1990-01-01

In an effort to analyze and document the potential for power sector efficiency improvements from generation to end-use, the Agency for International Development and the Government of Costa Rica are jointly conducting an integrated power sector efficiency analysis. Potential for energy and cost savings in power plants, transmission and distribution, and demand-side management programs are being evaluated. The product of this study will be an integrated investment plan for the Instituto Costarricense de Electricidad, incorporating both supply and demand side investment options. This paper presents the methodology employed in the study, as well as preliminary estimates of the results ofmore » the study. 14 refs., 4 figs., 5 tabs.« less

A primer on on-demand polymerase chain reaction technology.

PubMed

Spencer, Maureen; Barnes, Sue; Parada, Jorge; Brown, Scott; Perri, Luci; Uettwiller-Geiger, Denise; Johnson, Helen Boehm; Graham, Denise

2015-10-01

Efforts to reduce health care-associated infections (HAIs) have grown in both scale and sophistication over the past few decades; however, the increasing threat of antimicrobial resistance and the impact of new legislation regarding HAIs on health care economics make the fight against them all the more urgent. On-demand polymerase chain reaction (PCR) technology has proven to be a highly effective weapon in this fight, offering the ability to accurately and efficiently identify disease-causing pathogens such that targeted and directed therapy can be initiated at the point of care. As a result, on-demand PCR technology has far-reaching influences on HAI rates, health care outcomes, hospital length of stay, isolation days, patient satisfaction, antibiotic stewardship, and health care economics. The basics of on-demand PCR technology and its potential to impact health care have not been widely incorporated into health care education and enrichment programs for many of those involved in infection control and prevention, however. This article serves as a primer on on-demand PCR technology and its ramifications. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Technology assessment of solar-energy systems. Part 1: An analysis of life-cycle costs of solar facilities. Part 2: Minerals critical to the development of future energy technologies in high and low solar scenarios

NASA Astrophysics Data System (ADS)

Sathaye, J.; Ruderman, H.

1981-09-01

Solar and renewable technologies account for most of the increase in material requirements for energy technologies. The analysis identified 20 minerals where domestic reserves are inadequate to meet the demand. Domestic mine capacity is inadequate for 23 minerals. However, the world wide mine production capacity is adequate to meet the US demand for all the minerals. Energy related demand can therefore provide a potential market for some of these 23 minerals provided the US has deposits that can be exploited at worldwide competitive prices. For some critical and strategic minerals such as chromium the US demand peaks during a time period different than the period during which world demand peaks. The time period differences will help smooth market fluctuations and reduce the US vulnerability. Alternative technology designs can help mitigate diverse supply disruptions or sharp price increases. Alternatives may not always be available for a specific strategic and critical mineral. Each mineral may have to be analyzed and evaluated on its own merits before comparative options can be completely analyzed.

Art Therapists' Emotional Reactions to the Demands of Technology

ERIC Educational Resources Information Center

Asawa, Paige

2009-01-01

Art therapists increasingly are turning to educational and presentation technology to expand awareness of their field and to inform others in mental health care. This trend supports inquiry into how art therapists interact with and emotionally respond to the demands of technology. This paper presents a qualitative study that used 3 art-based focus…

Generic drug prices and policy in Australia: room for improvement? a comparative analysis with England.

PubMed

Mansfield, Sarah J

2014-02-01

To assess the degree to which reimbursement prices in Australia and England differ for a range of generic drugs, and to analyse the supply- and demand-side factors that may contribute to these differences. Australian and English reimbursement prices were compared for a range of generic drugs using pricing information obtained from government websites. Next, a literature review was conducted to identify supply- and demand-side factors that could affect generic prices in Australia and England. Various search topics were identified addressing potential supply-side (e.g. market approval, intellectual property protection of patented drugs, generic pricing policy, market size, generic supply chain and discounting practices) and demand-side (consumers, prescribers and pharmacists) factors. Related terms were searched in academic databases, official government websites, national statistical databases and internet search engines. Analysis of drug reimbursement prices for 15 generic molecules (representing 45 different drug presentations) demonstrated that Australian prices were on average over 7-fold higher than in England. Significant supply-side differences included aspects of pricing policy, the relative size of the generics markets and the use of clawback policies. Major differences in demand-side policies related to generic prescribing, pharmacist substitution and consumer incentives. Despite recent reforms, the Australian Government continues to pay higher prices than its English counterpart for many generic medications. The results suggest that particular policy areas may benefit from review in Australia, including the length of the price-setting process, the frequency of subsequent price adjustments, the extent of price competition between originators and generics, medical professionals' knowledge about generic medicines and incentives for generic prescribing. WHAT IS KNOWN ABOUT THE TOPIC? Prices of generic drugs have been the subject of much scrutiny over recent years. From 2005 to 2010 the Australian Government responded to observations that Pharmaceutical Benefits Scheme prices for many generics were higher than in numerous comparable countries by instituting several reforms aimed at reducing the prices of generics. Despite this, several studies have demonstrated that prices for generic statins (one class of cholesterol-lowering drug) are higher in Australia compared with England and many other developed countries, and prices of numerous other generics remain higher than in the USA and New Zealand. Recently there has been increasing interest in why these differences exist. WHAT DOES THIS PAPER ADD? By including a much larger range of commonly used and costly generic drugs, this paper builds significantly on the limited previous investigations of generic drug prices in Australia and England. Additionally, this is the first comprehensive investigation of multiple supply- and, in particular, demand-side factors that may explain any price differences between these countries. WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? Practitioners may contribute to the higher prices of generic medications in Australia compared with England through relatively low rates of generic prescribing. There are also significant implications for health policy makers, as this paper demonstrates that if Australia achieved the same prices as England for many generic drugs there could be substantial savings for the Pharmaceutical Benefits Scheme.

Research on the full life cycle management system of smart electric energy meter

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; Guo, Dingying; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Renheng, Xu

2018-02-01

At present, China’s smart electric energy meter life management is started from the procurement and acceptance. The related monitoring and management of the manufacturing sector has not yet been carried out. This article applies RFID technology and network cloud platform to full life cycle management system of smart electric energy meters, builds this full life cycle management system including design and manufacturing, process control, measurement and calibration testing, storage management, user acceptance, site operation, maintenance scrap and other aspects. Exploring smart electric energy meters on-line and off-line communication by the application of active RFID communication functions, and the actual functional application such as local data exchange and instrument calibration. This system provides technical supports on power demand side management and the improvement of smart electric energy meter reliability evaluation system.

On-demand anakinra treatment is effective in mevalonate kinase deficiency.

PubMed

Bodar, E J; Kuijk, L M; Drenth, J P H; van der Meer, J W M; Simon, A; Frenkel, J

2011-12-01

Mevalonate kinase deficiency (MKD) is a hereditary autoinflammatory syndrome marked by recurrent attacks of fever and inflammation. Severe enzyme deficiency results in mevalonic aciduria (MA) and milder deficiency in hyperimmunoglobulin D syndrome (HIDS). Treatment remains a challenge. To observe the effect of the recombinant interleukin-1 receptor antagonist anakinra in patients with MKD. A prospective observational study was undertaken. Two patients with MA started continuous treatment with anakinra (1-2 mg/kg/day) and nine patients with HIDS chose between continuous treatment and on-demand treatment (starting at first symptoms of attack, 100 mg/day or 1 mg/kg/day for 5-7 days). Anakinra induced partial remission in one patient with MA but there was no response in the other patient with MA. In one patient with HIDS continuous treatment induced complete remission for 7 months but was stopped because of side effects. Eight patients with HIDS preferred on-demand treatment from the start. This induced a clinical response (≥50% reduction in duration) in 8 of 12 treated attacks without a change in attack frequency. Anakinra prevented fever attacks due to vaccination without inhibiting antibody induction. No major side effects were seen. On-demand treatment with anakinra in HIDS decreases the duration and severity of fever attacks. Because of the burden of daily injections and relatively long asymptomatic intervals of HIDS, all patients with HIDS preferred on-demand treatment.

Where does the waiting list begin? A short review of the dynamics and organization of modern waiting lists.

PubMed

Rotstein, Dalia L; Alter, David A

2006-06-01

Waiting for medical care is the by-product of system rationing, where demand exceeds supply. In this short report we expand on the conventional concept of the queue, by focusing on the regulation of demand and by incorporating a funnel and spout analogy. Real-world examples are used to illustrate the infancy of funnel or demand-side reform initiatives targeting the queue, and the suggestion is made that policy needs to address the concept of 'waiting' much earlier in the treatment cycle.

A Brighter Side of the New Genetics

ERIC Educational Resources Information Center

Glowienka, Emerine

1975-01-01

Discusses the positive side of genetic technology advances and the implications for human beings, both from a sociological viewpoint and the point of view of a social philosopher. Genetic engineering, technology and counseling are discussed. (BR)

Integrating uncertainties for climate change mitigation

NASA Astrophysics Data System (ADS)

Rogelj, Joeri; McCollum, David; Reisinger, Andy; Meinshausen, Malte; Riahi, Keywan

2013-04-01

The target of keeping global average temperature increase to below 2°C has emerged in the international climate debate more than a decade ago. In response, the scientific community has tried to estimate the costs of reaching such a target through modelling and scenario analysis. Producing such estimates remains a challenge, particularly because of relatively well-known, but ill-quantified uncertainties, and owing to limited integration of scientific knowledge across disciplines. The integrated assessment community, on one side, has extensively assessed the influence of technological and socio-economic uncertainties on low-carbon scenarios and associated costs. The climate modelling community, on the other side, has worked on achieving an increasingly better understanding of the geophysical response of the Earth system to emissions of greenhouse gases (GHG). This geophysical response remains a key uncertainty for the cost of mitigation scenarios but has only been integrated with assessments of other uncertainties in a rudimentary manner, i.e., for equilibrium conditions. To bridge this gap between the two research communities, we generate distributions of the costs associated with limiting transient global temperature increase to below specific temperature limits, taking into account uncertainties in multiple dimensions: geophysical, technological, social and political. In other words, uncertainties resulting from our incomplete knowledge about how the climate system precisely reacts to GHG emissions (geophysical uncertainties), about how society will develop (social uncertainties and choices), which technologies will be available (technological uncertainty and choices), when we choose to start acting globally on climate change (political choices), and how much money we are or are not willing to spend to achieve climate change mitigation. We find that political choices that delay mitigation have the largest effect on the cost-risk distribution, followed by geophysical, future energy demand, and mitigation technology uncertainties. This information provides central information for policy making, since it helps to understand the relationship between mitigation costs and their potential to reduce the risk of exceeding 2°C, or other temperature limits like 3°C or 1.5°C, under a wide range of scenarios.

Pharmacokinetics of Scopolamine Intranasal Gel Formulation (INSCOP) During Antiorthostatic Bedrest

NASA Technical Reports Server (NTRS)

Putcha, Lakshmi; Boyd, J. L.; Du, B.; Daniels, V.; Crady, C.

2011-01-01

Space Motion sickness (SMS) is an age old problem for space travelers on short and long duration space flight Oral antiemetics are not very effective in space due to poor bioavailability. Scopolamine (SCOP) is the most frequently used drug by recreational travelers V patch, tablets available on the market. Common side effects of antiemetics, in general, include drowsiness, sedation, dry mouth and reduced psychomotor performance. Severity and persistence of side effects are often dose related Side effects can be detrimental in high performance demanding settings, e.g. space flight, military.

A study of some economic factors relating to the development and implementation of a satellite power system

NASA Technical Reports Server (NTRS)

1978-01-01

Areas are examined relating to the design, development and implementation of a satellite power system (SPS): an analysis of the effect of energy R&D programs in general and SPS in particular on optimal fossil fuel consumption patterns, a study of alternative uses of SPS technologies, and a study of the electric power market penetration potential for SPS. It is shown that a credible program of R&D on long-range energy alternatives leads to lower optimal prices for fossil fuels, resulting in large short-term benefits accruing to the specific program elements. Several alternative uses of SPS technologies were identified; however the markets for these technologies are generally quite diffuse and difficult to assess. The notable exception is solar array technology which has, potentially, a very large non-SPS market. It is shown that the market for SPS units derives from two components of demand: the demand created by growth in the electrical energy demand which leads to an increased demand for baseload generating capacity, and a demand created by the need to replace retiring capacity.

College as Country Club: Do Colleges Cater to Students' Preferences for Consumption? NBER Working Paper No. 18745

ERIC Educational Resources Information Center

Jacob, Brian; McCall, Brian; Stange, Kevin M.

2013-01-01

This paper investigates whether demand-side market pressure explains colleges' decisions to provide consumption amenities to their students. We estimate a discrete choice model of college demand using micro data from the high school classes of 1992 and 2004, matched to extensive information on all four year colleges in the U.S. We find that most…

The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

ERIC Educational Resources Information Center

Moye, Johnny J.

2017-01-01

The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

Information on Demand in the Recording Studio: Building the Case for Teaching Music Technology with an Interactive Agenda

ERIC Educational Resources Information Center

Voss, Brett

2016-01-01

Education in a contemporary context increasingly requires students to engage with learning technologies. This can present a challenge to both students and teachers who at times struggle to engage with the technical processes involved in navigating these technologies. Outside of formal education settings, on-demand information facilitated through…

A State of the Art Review on the Impact of Technology on Skill Demand in OECD Countries.

ERIC Educational Resources Information Center

Kim, Young-Hwa

2002-01-01

Review of research since the 1980s shows a consistent trend toward higher skill demands in Organisation for Economic Cooperation and Development countries. There is evidence both that higher skills are needed to implement technology and that implementing technology raises skill requirements. Automation is displacing low-skilled jobs and creating…

Handbook of Research on Innovative Technology Integration in Higher Education

ERIC Educational Resources Information Center

Nafukho, Fredrick Muyia, Ed.; Irby, Beverly J., Ed.

2015-01-01

Our increasingly globalized world is driven by shared knowledge, and nowhere is that knowledge more important than in education. Now more than ever, there is a demand for technology that will assist in the spread of knowledge through customized, self-paced, and on-demand learning. The Handbook of Research on Innovative Technology Integration in…

Patterns of control of maximum metabolic rate in humans.

PubMed

Hochachka, Peter W; Beatty, Cheryl L

2003-09-01

In this analysis, four performance phenotypes were used to compare mechanisms of control of aerobic maximum metabolic rate (MMR): (i) untrained sedentary (US) subjects, as a reference group against which to compare (ii) power trained (PT), (iii) endurance trained (ET) and (iv) high altitude adapted native (HA) subject groups. Sprinters represented the PT group; long distance runners illustrated the ET group; and Quechuas represented the HA group. Numerous recent studies have identified contributors to control on both the adenosine triphosphate (ATP) supply side and the ATP demand side of ATP turnover. Control coefficients or c(i) values were defined as fractional change in MMR/fractional change in the capacity of any given step in ATP turnover. From the best available evidence it appears that at MMR all five of the major steps in energy delivery (namely, ventilation, pulmonary diffusion, cardiac output, tissue capillary - mitochondrial O(2) transfer, and aerobic cell metabolism per se) approach an upper functional ceiling, with control strength being distributed amongst the various O(2) flux steps. On the energy demand side, the situation is somewhat simplified since at MMR approximately 90% of O(2)-based ATP synthesis is used for actomyosin (AM) and Ca(2+) ATPases; at MMR these two ATP demand rates also appear to be near an upper functional ceiling. In consequence, at MMR the control contributions or c(i) values are rather evenly divided amongst all seven major steps in ATP supply and ATP demand pathways right to the point of fatigue. Relative to US (the reference group), in PT subjects at MMR control strength shifts towards O(2) delivery steps (ventilation, pulmonary diffusion and cardiac output). In contrast in ET and HA subjects at MMR control shifts towards the energy demand steps (AM and Ca(2+) ATPases), and more control strength is focussed on tissue level ATP supply and ATP demand. One obvious advantage of the ET and HA control pattern is improved metabolite homeostasis. Another possibility is that, with some reserve capacity in the O(2) delivery steps and control focussed on ATP turnover at the tissue level, nature has designed the ideal 'endurance machine'.

Control of maximum metabolic rate in humans: dependence on performance phenotypes.

PubMed

Hochachka, Peter W; Burelle, Yan

2004-01-01

Borrowing from metabolic control analysis the concept of control coefficients or ci values, defined as fractional change in MMR/fractional change in the capacity of any given step in ATP turnover, we used four performance phenotypes to compare mechanisms of control of aerobic maximum metabolic rate (MMR): (i) untrained sedentary (US) subjects, as a reference group against which to compare (ii) power trained (PT), (iii) endurance trained (ET), and (iv) high altitude adapted native (HA) subject groups. Sprinters represented the PT group; long distance runners illustrated the ET group; and Andean natives represented the HA group. Numerous recent studies have identified contributors to control on both the adenosine triphosphate (ATP) supply side and the ATP demand side of ATP turnover. From the best available evidence it appears that at MMR all five of the major steps in energy delivery (namely, ventilation, pulmonary diffusion, cardiac output, tissue capillary--mitochondrial O2 transfer, and aerobic cell metabolism per se) approach an upper functional ceiling, with control strength being distributed amongst the various O2 flux steps. On the energy demand side, the situation is somewhat simplified since at MMR approximately 90% of O2-based ATP synthesis is used for actomyosin (AM) and Ca2+ ATPases; at MMR these two ATP demand rates also appear to be near an upper functional ceiling. In consequence, at MMR the control contributions or ci values are distributed amongst all seven major steps in ATP supply and ATP demand pathways right to the point of fatigue. Relative to US (the reference group), in PT subjects at MMR control strength shifts towards O2 delivery steps (ventilation, pulmonary diffusion, and cardiac output); here physiological regulation clearly dominates MMR control. In contrast in ET and HA subjects at MMR control shifts towards the energy demand steps (AM and Ca2+ ATPases), and more control strength is focussed on tissue level ATP supply and ATP demand. One obvious advantage of the ET and HA biochemical-level control is improved metabolite homeostasis. Additionally, with some reserve capacity in the O2 delivery steps, the focussing of control on ATP turnover at the tissue level has allowed nature to improve on an 'endurance machine' design.

Demand- and supply-side determinants of diphtheria-pertussis-tetanus nonvaccination and dropout in rural India.

PubMed

Ghosh, Arpita; Laxminarayan, Ramanan

2017-02-15

Although 93% of 12- to 23-month-old children in India receive at least one vaccine, typically Bacillus Calmette-Guérin, only 75% complete the recommended three doses of diphtheria-pertussis-tetanus (DPT, also referred to as DTP) vaccine. Determinants can be different for nonvaccination and dropout but have not been examined in earlier studies. We use the three-dose DPT series as a proxy for the full sequence of recommended childhood vaccines and examine the determinants of DPT nonvaccination and dropout between doses 1 and 3. We analyzed data on 75,728 6- to 23-month-old children in villages across India to study demand- and supply-side factors determining nonvaccination with DPT and dropout between DPT doses 1 and 3, using a multilevel approach. Data come from the District Level Household and Facility Survey 3 (2007-08). Individual- and household-level factors were associated with both DPT nonvaccination and dropout between doses 1 and 3. Children whose mothers had no schooling were 2.3 times more likely not to receive any DPT vaccination and 1.5 times more likely to drop out between DPT doses 1 and 3, compared with children whose mothers had 10 or more years of schooling. Although supply-side factors related to availability of public health facilities and immunization-related health workers in villages were not correlated with dropout between DPT doses 1 and 3, children in districts where 46% or more villages had a healthcare subcentre were 1.5 times more likely to receive at least one dose of DPT vaccine compared with children in districts where 30% or fewer villages had subcentres. Nonvaccination with DPT in India is influenced by village- and district-level contextual factors over and above individuals' background characteristics. Dropout between DPT doses 1 and 3 is associated more strongly with demand-side factors than with village- and district-level supply-side factors. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Price elasticity matrix of demand in power system considering demand response programs

NASA Astrophysics Data System (ADS)

Qu, Xinyao; Hui, Hongxun; Yang, Shengchun; Li, Yaping; Ding, Yi

2018-02-01

The increasing renewable energy power generations have brought more intermittency and volatility to the electric power system. Demand-side resources can improve the consumption of renewable energy by demand response (DR), which becomes one of the important means to improve the reliability of power system. In price-based DR, the sensitivity analysis of customer’s power demand to the changing electricity prices is pivotal for setting reasonable prices and forecasting loads of power system. This paper studies the price elasticity matrix of demand (PEMD). An improved PEMD model is proposed based on elasticity effect weight, which can unify the rigid loads and flexible loads. Moreover, the structure of PEMD, which is decided by price policies and load types, and the calculation method of PEMD are also proposed. Several cases are studied to prove the effectiveness of this method.

Advanced Technology Display House. Volume 1: Project Summary and Procedures

NASA Technical Reports Server (NTRS)

Maund, D. H.

1981-01-01

The Advanced Technology Display House (ATDH) project is described. Tasks are defined in the areas of energy demand, water demand, sewage treatment, electric power, plumbing, lighting, heating, and air conditioning. Energy, water, and sewage systems are defined.

Sectoral contributions to surface water stress in the coterminous United States

NASA Astrophysics Data System (ADS)

Averyt, K.; Meldrum, J.; Caldwell, P.; Sun, G.; McNulty, S.; Huber-Lee, A.; Madden, N.

2013-09-01

Here, we assess current stress in the freshwater system based on the best available data in order to understand possible risks and vulnerabilities to regional water resources and the sectors dependent on freshwater. We present watershed-scale measures of surface water supply stress for the coterminous United States (US) using the water supply stress index (WaSSI) model which considers regional trends in both water supply and demand. A snapshot of contemporary annual water demand is compared against different water supply regimes, including current average supplies, current extreme-year supplies, and projected future average surface water flows under a changing climate. In addition, we investigate the contributions of different water demand sectors to current water stress. On average, water supplies are stressed, meaning that demands for water outstrip natural supplies in over 9% of the 2103 watersheds examined. These watersheds rely on reservoir storage, conveyance systems, and groundwater to meet current water demands. Overall, agriculture is the major demand-side driver of water stress in the US, whereas municipal stress is isolated to southern California. Water stress introduced by cooling water demands for power plants is punctuated across the US, indicating that a single power plant has the potential to stress water supplies at the watershed scale. On the supply side, watersheds in the western US are particularly sensitive to low flow events and projected long-term shifts in flow driven by climate change. The WaSSI results imply that not only are water resources in the southwest in particular at risk, but that there are also potential vulnerabilities to specific sectors, even in the ‘water-rich’ southeast.

Price elasticity reconsidered: Panel estimation of an agricultural water demand function

NASA Astrophysics Data System (ADS)

Schoengold, Karina; Sunding, David L.; Moreno, Georgina

2006-09-01

Using panel data from a period of water rate reform, this paper estimates the price elasticity of irrigation water demand. Price elasticity is decomposed into the direct effect of water management and the indirect effect of water price on choice of output and irrigation technology. The model is estimated using an instrumental variables strategy to account for the endogeneity of technology and output choices in the water demand equation. Estimation results indicate that the price elasticity of agricultural water demand is -0.79, which is greater than that found in previous studies.

David Palchak | NREL

Science.gov Websites

Electrical load forecasting with artificial neural networks Demand-side management optimization with Matlab -58491. D. Palchak, S. Suryanarayanan, and D. Zimmerle. "An Artificial Neural Network in Short-Term

National-level differences in the adoption of environmental health technologies: a cross-border comparison from Benin and Togo.

PubMed

Wendland, Kelly J; Pattanayak, Subhrendu K; Sills, Erin O

2015-03-01

Environmental health problems such as malaria, respiratory infections, diarrhoea and malnutrition pose very high burdens on the poor rural people in much of the tropics. Recent research on key interventions-the adoption and use of relatively cheap and effective environmental health technologies-has focused primarily on the influence of demand-side household-level drivers. Relatively few studies of the promotion and use of these technologies have considered the role of contextual factors such as governance, the enabling environment and national policies because of the challenges of cross-country comparisons. We exploit a natural experimental setting by comparing household adoption across the Benin-Togo national border that splits the Tamberma Valley in West Africa. Households across the border share the same culture, ethnicity, weather, physiographic features, livelihoods and infrastructure; however, they are located in countries at virtually opposite ends of the institutional spectrum of democratic elections, voice and accountability, effective governance and corruption. Binary choice models and rigorous non-parametric matching estimators confirm that households in Benin are more likely than households in Togo to plant soybeans, build improved cookstoves and purchase mosquito nets, ceteris paribus. Although we cannot identify the exact mechanism for the large and significant national-level differences in technology adoption, our findings suggest that contextual institutional factors can be more important than household characteristics for technology adoption. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.

Multiple policies to enhance prescribing efficiency for established medicines in Europe with a particular focus on demand-side measures: findings and future implications.

PubMed

Godman, Brian; Wettermark, Bjorn; van Woerkom, Menno; Fraeyman, Jessica; Alvarez-Madrazo, Samantha; Berg, Christian; Bishop, Iain; Bucsics, Anna; Campbell, Stephen; Finlayson, Alexander E; Fürst, Jurij; Garuoliene, Kristina; Herholz, Harald; Kalaba, Marija; Laius, Ott; Piessnegger, Jutta; Sermet, Catherine; Schwabe, Ulrich; Vlahović-Palčevski, Vera V; Markovic-Pekovic, Vanda; Vončina, Luka; Malinowska, Kamila; Zara, Corinne; Gustafsson, Lars L

2014-01-01

The appreciable growth in pharmaceutical expenditure has resulted in multiple initiatives across Europe to lower generic prices and enhance their utilization. However, considerable variation in their use and prices. Assess the influence of multiple supply and demand-side initiatives across Europe for established medicines to enhance prescribing efficiency before a decision to prescribe a particular medicine. Subsequently utilize the findings to suggest potential future initiatives that countries could consider. An analysis of different methodologies involving cross national and single country retrospective observational studies on reimbursed use and expenditure of PPIs, statins, and renin-angiotensin inhibitor drugs among European countries. Nature and intensity of the various initiatives appreciably influenced prescribing behavior and expenditure, e.g., multiple measures resulted in reimbursed expenditure for PPIs in Scotland in 2010 56% below 2001 levels despite a 3-fold increase in utilization and in the Netherlands, PPI expenditure fell by 58% in 2010 vs. 2000 despite a 3-fold increase in utilization. A similar picture was seen with prescribing restrictions, i.e., (i) more aggressive follow-up of prescribing restrictions for patented statins and ARBs resulted in a greater reduction in the utilization of patented statins in Austria vs. Norway and lower utilization of patented ARBs vs. generic ACEIs in Croatia than Austria. However, limited impact of restrictions on esomeprazole in Norway with the first prescription or recommendation in hospital where restrictions do not apply. Similar findings when generic losartan became available in Western Europe. Multiple demand-side measures are needed to influence prescribing patterns. When combined with supply-side measures, activities can realize appreciable savings. Health authorities cannot rely on a "spill over" effect between classes to affect changes in prescribing.

Multiple policies to enhance prescribing efficiency for established medicines in Europe with a particular focus on demand-side measures: findings and future implications

PubMed Central

Godman, Brian; Wettermark, Bjorn; van Woerkom, Menno; Fraeyman, Jessica; Alvarez-Madrazo, Samantha; Berg, Christian; Bishop, Iain; Bucsics, Anna; Campbell, Stephen; Finlayson, Alexander E.; Fürst, Jurij; Garuoliene, Kristina; Herholz, Harald; Kalaba, Marija; Laius, Ott; Piessnegger, Jutta; Sermet, Catherine; Schwabe, Ulrich; Vlahović-Palčevski, Vera V.; Markovic-Pekovic, Vanda; Vončina, Luka; Malinowska, Kamila; Zara, Corinne; Gustafsson, Lars L.

2014-01-01

Introduction: The appreciable growth in pharmaceutical expenditure has resulted in multiple initiatives across Europe to lower generic prices and enhance their utilization. However, considerable variation in their use and prices. Objective: Assess the influence of multiple supply and demand-side initiatives across Europe for established medicines to enhance prescribing efficiency before a decision to prescribe a particular medicine. Subsequently utilize the findings to suggest potential future initiatives that countries could consider. Method: An analysis of different methodologies involving cross national and single country retrospective observational studies on reimbursed use and expenditure of PPIs, statins, and renin-angiotensin inhibitor drugs among European countries. Results: Nature and intensity of the various initiatives appreciably influenced prescribing behavior and expenditure, e.g., multiple measures resulted in reimbursed expenditure for PPIs in Scotland in 2010 56% below 2001 levels despite a 3-fold increase in utilization and in the Netherlands, PPI expenditure fell by 58% in 2010 vs. 2000 despite a 3-fold increase in utilization. A similar picture was seen with prescribing restrictions, i.e., (i) more aggressive follow-up of prescribing restrictions for patented statins and ARBs resulted in a greater reduction in the utilization of patented statins in Austria vs. Norway and lower utilization of patented ARBs vs. generic ACEIs in Croatia than Austria. However, limited impact of restrictions on esomeprazole in Norway with the first prescription or recommendation in hospital where restrictions do not apply. Similar findings when generic losartan became available in Western Europe. Conclusions: Multiple demand-side measures are needed to influence prescribing patterns. When combined with supply-side measures, activities can realize appreciable savings. Health authorities cannot rely on a “spill over” effect between classes to affect changes in prescribing. PMID:24987370

Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wise, B.K.; Hughes, K.R.; Danko, S.L.

1994-07-01

This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promotemore » the adoption, implementation, and enforcement of energy-efficient building energy codes.« less

2001 Industry Studies: Information

DTIC Science & Technology

2001-01-01

increasingly demand communications, computers, and software for use in the Internet , intranets, and extranets. Information technology (IT) - enabled...As the number of Internet users increases, so does the demand for the rapid deployment of information and telecommunication technologies . The key...proliferation has become uncontrollable. Only then will the US maintain the lead in the IT market . 13 ESSAYS ON MAJOR ISSUES ISSUE: THE INFORMATION TECHNOLOGY

The application demand analysis of advanced photoelectric technology in the future unmanned vehicle loads

NASA Astrophysics Data System (ADS)

Zhang, Lei; Cao, Wei; Li, Shengcai; Lu, Peng

2018-01-01

Introduced some unmanned vehicles development present situation, points out that the main development trend of photoelectric technology, analyzes the basic ability requirement of unmanned vehicles, in the future war system demonstrates the photoelectric information transmission, battlefield situational awareness, photoelectric integrated optoelectronic technology such as against the application of the unmanned vehicles demand in the future.

An Examination of the Role of Technological Tools in Relation to the Cognitive Demand of Mathematical Tasks in Secondary Classrooms

ERIC Educational Resources Information Center

Sherman, Milan

2011-01-01

This study investigates the role of digital cognitive technologies in supporting students' mathematical thinking while engaging with instructional tasks. Specifically, the study sought to better understand how the use of technology is related to the cognitive demand of tasks. Data were collected in four secondary mathematics classrooms via…

The Five Families of Cognitive Learning: A Context in Which To Conduct Cognitive Demands Analyses of Innovative Technologies.

ERIC Educational Resources Information Center

Klein, Davina C. D.; O'Neil, Harold F., Jr.; Dennis, Robert A.; Baker, Eva L.

A cognitive demands analysis of a learning technology, a term that includes the hardware and the computer software products that form learning environments, attempts to describe the types of cognitive learning expected of the individual by the technology. This paper explores the context of cognitive learning, suggesting five families of cognitive…

Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings

NASA Astrophysics Data System (ADS)

Kamal, Rajeev

Buildings contribute a significant part to the electricity demand profile and peak demand for the electrical utilities. The addition of renewable energy generation adds additional variability and uncertainty to the power system. Demand side management in the buildings can help improve the demand profile for the utilities by shifting some of the demand from peak to off-peak times. Heating, ventilation and air-conditioning contribute around 45% to the overall demand of a building. This research studies two strategies for reducing the peak as well as shifting some demand from peak to off-peak periods in commercial buildings: 1. Use of gas heat pumps in place of electric heat pumps, and 2. Shifting demand for air conditioning from peak to off-peak by thermal energy storage in chilled water and ice. The first part of this study evaluates the field performance of gas engine-driven heat pumps (GEHP) tested in a commercial building in Florida. Four GEHP units of 8 Tons of Refrigeration (TR) capacity each providing air-conditioning to seven thermal zones in a commercial building, were instrumented for measuring their performance. The operation of these GEHPs was recorded for ten months, analyzed and compared with prior results reported in the literature. The instantaneous COPunit of these systems varied from 0.1 to 1.4 during typical summer week operation. The COP was low because the gas engines for the heat pumps were being used for loads that were much lower than design capacity which resulted in much lower efficiencies than expected. The performance of equivalent electric heat pump was simulated from a building energy model developed to mimic the measured building loads. An economic comparison of GEHPs and conventional electrical heat pumps was done based on the measured and simulated results. The average performance of the GEHP units was estimated to lie between those of EER-9.2 and EER-11.8 systems. The performance of GEHP systems suffers due to lower efficiency at part load operation. The study highlighted the need for optimum system sizing for GEHP/HVAC systems to meet the building load to obtain better performance in buildings. The second part of this study focusses on using chilled water or ice as thermal energy storage for shifting the air conditioning load from peak to off-peak in a commercial building. Thermal energy storage can play a very important role in providing demand-side management for diversifying the utility demand from buildings. Model of a large commercial office building is developed with thermal storage for cooling for peak power shifting. Three variations of the model were developed and analyzed for their performance with 1) ice storage, 2) chilled water storage with mixed storage tank and 3) chilled water storage with stratified tank, using EnergyPlus 8.5 software developed by the US Department of Energy. Operation strategy with tactical control to incorporate peak power schedule was developed using energy management system (EMS). The modeled HVAC system was optimized for minimum cost with the optimal storage capacity and chiller size using JEPlus. Based on the simulation, an optimal storage capacity of 40-45 GJ was estimated for the large office building model along with 40% smaller chiller capacity resulting in higher chiller part-load performance. Additionally, the auxiliary system like pump and condenser were also optimized to smaller capacities and thus resulting in less power demand during operation. The overall annual saving potential was found in the range of 7-10% for cooling electricity use resulting in 10-17% reduction in costs to the consumer. A possible annual peak shifting of 25-78% was found from the simulation results after comparing with the reference models. Adopting TES in commercial buildings and achieving 25% peak shifting could result in a reduction in peak summer demand of 1398 MW in Tampa.

Demand Response Compensation Methodologies: Case Studies for Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gagne, Douglas A; Settle, Donald E; Aznar, Alexandra Y

This report examines various compensation methodologies for demand response programs in Mexico. This report presents three case studies, including New England, California, and Hawaii. Demand response (DR) can refer to a variety of approaches to changing the amount and timing of customers' electricity use, allowing the electricity supplier to more easily balance electricity supply and demand. The level of compensation for a DR program will depend greatly upon both the regulatory context of the electricity supplier, as well as the economic circumstances of the DR providers. For a regulated utility, a proposed compensation level may need to pass regulatory approval.more » To determine the value of DR resources, a regulatory body typically seeks to determine the costs that the utility would avoid if demand-side resources 'produce' energy.« less

Implications of Emerging Vehicle Technologies on Rare Earth Supply and Demand in the United States

DOE PAGES

Fishman, Tomer; Myers, Rupert; Rios, Orlando; ...

2018-01-25

In this article, we explore the long-term demand and supply potentials of rare earth elements in alternative energy vehicles (AEVs) in the United States until 2050. Using a stock-flow model, we compare a baseline scenario with scenarios that incorporate an exemplary technological innovation: a novel aluminum–cerium–magnesium alloy. We find that the introduction of the novel alloy demonstrates that even low penetration rates can exceed domestic cerium production capacity, illustrating possible consequences of technological innovations to material supply and demand. End-of-life vehicles can, however, overtake domestic mining as a source of materials, calling for proper technologies and policies to utilize thismore » emerging source. The long-term importing of critical materials in manufactured and semi-manufactured products shifts the location of material stocks and hence future secondary supply of high-value materials, culminating in a double benefit to the importing country. This modeling approach is adaptable to the study of varied scenarios and materials, linking technologies with supply and demand dynamics in order to understand their potential economic and environmental consequences.« less

Implications of Emerging Vehicle Technologies on Rare Earth Supply and Demand in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fishman, Tomer; Myers, Rupert; Rios, Orlando

In this article, we explore the long-term demand and supply potentials of rare earth elements in alternative energy vehicles (AEVs) in the United States until 2050. Using a stock-flow model, we compare a baseline scenario with scenarios that incorporate an exemplary technological innovation: a novel aluminum–cerium–magnesium alloy. We find that the introduction of the novel alloy demonstrates that even low penetration rates can exceed domestic cerium production capacity, illustrating possible consequences of technological innovations to material supply and demand. End-of-life vehicles can, however, overtake domestic mining as a source of materials, calling for proper technologies and policies to utilize thismore » emerging source. The long-term importing of critical materials in manufactured and semi-manufactured products shifts the location of material stocks and hence future secondary supply of high-value materials, culminating in a double benefit to the importing country. This modeling approach is adaptable to the study of varied scenarios and materials, linking technologies with supply and demand dynamics in order to understand their potential economic and environmental consequences.« less

Using the Existential Criterion for Assessing the Personality of Overprotective and Overly Demanding Parents in the Families of Patients Who Have Sought Psychological Counseling for Parent-Child Problems

ERIC Educational Resources Information Center

Kapustin, S. A.

2016-01-01

The article presents the results of applying the existential criterion of normal and abnormal personalities for assessing the personality of overprotective and overly demanding parents in 176 families of patients who have sought psychological counseling. It is shown that the position of overprotective parents is one-sided in relation to the…

Participation in Non-Formal Learning in EU-15 and EU-8 Countries: Demand and Supply Side Factors

ERIC Educational Resources Information Center

Roosmaa, Eve-Liis; Saar, Ellu

2012-01-01

The main purpose of this paper is to provide an in-depth analysis of participation in non-formal learning in different European Union member states. The paper also seeks to extend analysis of the training gap by pursuing the distinction between the supply and the demand for skills. We use aggregate data from the Adult Education Survey (Eurostat)…

Carbon and energy footprint of electrochemical vinegar wastewater treatment

NASA Astrophysics Data System (ADS)

Gerek, Emine Esra; Yilmaz, Seval; Savaş Koparal, A.; Nezih Gerek, Ömer

2017-11-01

Electrochemical treatment of wastewaters that are rich in organic compounds is a popular method, due to its acidic nature that avoids biological treatment. In many cases, the pollution hazard is considered as the chemical oxygen demand (COD) from active carbon, and the success of the treatment is measured in terms of how much this specific parameter is reduced. However, if electricity is used during the treatment process, the treatment "itself" has manufacturing and operational energy costs. Many of the studies consider energy utilization as a monetary cost, and try to reduce its amount. However, the energy cost of the treatment also causes emission of carbon at the energy producing side of the closed loop. This carbon emission can be converted into oxygen demand, too. Therefore, it can be argued that one must look for the total optimal carbon efficiency (or oxygen demand), while reducing the COD. We chose a highly acidic wastewater case of vinegar production, which is a popular food product in Turkey, to demonstrate the high energy consumption and carbon emission problem of the electrochemical treatment approach. A novel strategy is presented to monitor total oxygen demand simultaneously at the treatment and energy production sides. Necessity of renewable energy utilization and conditions on process termination points are discussed.

The supply and demand for pollution control: Evidence from wastewater treatment

USGS Publications Warehouse

McConnell, V.D.; Schwarz, G.E.

1992-01-01

This paper analyzes the determination of pollution control from wastewater treatment plants as an economic decision facing local or regional regulators. Pollution control is measured by plant design effluent concentration levels and is fully endogenous in a supply- and-demand model of treatment choice. On the supply side, plant costs are a function of the design treatment level of the plant, and on the demand side, treatment level is a function of both the costs of control and the regional or regulatory preferences for control. We find evidence that the economic model of effluent choice by local regulators has a good deal of explanatory power. We find evidence that wastewater treatment plant removal of biological oxygen demand (BOD) is sensitive to many local factors including the size of the treatment plant, the flow rate of the receiving water, the population density of the surrounding area, regional growth, state sensitivity to environmental issues, state income, and the extent to which the damages from pollution fall on other states. We find strong evidence that regulators are sensitive to capital costs in determining the design level of BOD effluent reduction at a plant. Thus, proposed reductions in federal subsidies for wastewater treatment plant construction are likely to have significant adverse effects on water quality. ?? 1992.

Encouraging the use of generic medicines: implications for transition economies.

PubMed

King, Derek R; Kanavos, Panos

2002-08-01

Generic drugs have a key role to play in the efficient allocation of financial resources for pharmaceutical medicines. Policies implemented in the countries with a high rate of generic drug use, such as Canada, Denmark, Germany, the Netherlands, the United Kingdom, and the United States, are reviewed, with consideration of the market structures that facilitate strong competition. Savings in these countries are realized through increases in the volume of generic drugs used and the frequently significant differences in the price between generic medicines and branded originator medicines. Their policy tools include the mix of supply-side measures and demand-side measures that are relevant for generic promotion and higher generic use. On the supply-side, key policy measures include generic drug marketing regulation that facilitates market entry soon after patent expiration, reference pricing, the pricing of branded originator products, and the degree of price competition in pharmaceutical markets. On the demand-side, measures typically encompass influencing prescribing and dispensing patterns as well as introducing a co-payment structure for consumers/patients that takes into consideration the difference in cost between branded and generic medicines. Quality of generic medicines is a pre-condition for all other measures discussed to take effect. The paper concludes by offering a list of policy options for decision-makers in Central and Eastern European economies in transition.

Technology Transfer Opportunities: On-Demand Printing in Support of National Geospatial Data

USGS Publications Warehouse

,

1997-01-01

The U.S. Geological Survey (USGS) and the 3M Company of St. Paul, Minnesota, have entered into a cooperative research and development agreement (CRADA) to investigate maps-on-demand technology to support the production of USGS mapping products. The CRADA will potentially help the USGS to develop on-demand alternatives to lithographic maps and help 3M to develop a series of commercial instant map-printing systems.

Efforts to monitor Global progress on individual and community demand for immunization: Development of definitions and indicators for the Global Vaccine Action Plan Strategic Objective 2.

PubMed

Hickler, Benjamin; MacDonald, Noni E; Senouci, Kamel; Schuh, Holly B

2017-06-16

The Second Strategic Objective of the Global Vaccine Action Plan, "individuals and communities understand the value of vaccines and demand immunization as both their right and responsibility", differs from the other five in that it does not focus on supply-side aspects of immunization programs but rather on public demand for vaccines and immunization services. This commentary summarizes the work (literature review, consultations with experts, and with potential users) and findings of the UNICEF/World Health Organization Strategic Objective 2 informal Working Group on Vaccine Demand, which developed a definition for demand and indicators related to Strategic Objective 2. Demand for vaccines and vaccination is a complex concept that is not external to supply systems but rather encompasses the interaction between human behaviors and system structure and dynamics. Copyright © 2017. Published by Elsevier Ltd.

The Production Rate and Employment of Ph.D. Astronomers

NASA Astrophysics Data System (ADS)

Metcalfe, Travis S.

2008-02-01

In an effort to encourage self-regulation of the astronomy job market, I examine the supply of, and demand for, astronomers over time. On the supply side, I document the production rate of Ph.D. astronomers from 1970 to 2006 using the UMI Dissertation Abstracts database, along with data from other independent sources. I compare the long-term trends in Ph.D. production with federal astronomy research funding over the same time period, and I demonstrate that additional funding is correlated with higher subsequent Ph.D. production. On the demand side, I monitor the changing patterns of employment using statistics about the number and types of jobs advertised in the AAS Job Register from 1984 to 2006. Finally, I assess the sustainability of the job market by normalizing this demand by the annual Ph.D. production. The most recent data suggest that there are now annual advertisements for about one postdoctoral job, half a faculty job, and half a research/support position for every new domestic Ph.D. recipient in astronomy and astrophysics. The average new astronomer might expect to hold up to 3 jobs before finding a steady position.

Analysis of recent projections of electric power demand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudson, Jr, D V

1993-08-01

This report reviews the changes and potential changes in the outlook for electric power demand since the publication of Review and Analysis of Electricity Supply Market Projections (B. Swezey, SERI/MR-360-3322, National Renewable Energy Laboratory). Forecasts of the following organizations were reviewed: DOE/Energy Information Administration, DOE/Policy Office, DRI/McGraw-Hill, North American Electric Reliability Council, and Gas Research Institute. Supply uncertainty was briefly reviewed to place the uncertainties of the demand outlook in perspective. Also discussed were opportunities for modular technologies, such as renewable energy technologies, to fill a potential gap in energy demand and supply.

Exploring How Technology Growth Limits Impact Optimal Carbon dioxide Mitigation Pathways

EPA Science Inventory

Energy system optimization models prescribe the optimal mix of technologies and fuels for meeting energy demands over a time horizon, subject to energy supplies, demands, and other constraints. When optimizing, these models will, to the extent allowed, favor the least cost combin...

Is demand-side financing equity enhancing? Lessons from a maternal health voucher scheme in Bangladesh.

PubMed

Ahmed, Shakil; Khan, M Mahmud

2011-05-01

Demand-side financing (DSF) is used in the less-developed countries of the world to improve access to healthcare and to encourage market supply. Under DSF, households receive vouchers that can be used to pay for healthcare services. This study evaluated the effects of a universal DSF on maternal healthcare service utilization in Bangladesh. A household survey was conducted in and around the voucher scheme area one year after the initiation of the project. Women who gave birth within a year prior to the survey were interviewed. The utilization rates of maternal health services were found to be higher for all socioeconomic groups in the project area than in the comparison areas. Voucher recipients in the project area were 3.6 times more likely to be assisted by skilled health personnel during delivery, 2.5 times more likely to deliver the baby in a health facility, 2.8 times more likely to receive postnatal care (PNC), 2.0 times more likely to get antenatal care (ANC) services and 1.5 times more likely to seek treatment for obstetric complications than pregnant women not in the program. The degree of socioeconomic inequality in maternal health service utilization was also lower in the project area than in the comparison area. The use of vouchers evidenced much stronger demand-increasing effects on the poor. Poor voucher recipients were 4.3 times more likely to deliver in a health facility and two times more likely to use skilled health personnel at delivery than the non-poor recipients. Contrary to the inverse equity hypothesis, the voucher scheme reduced inequality even in the short run. Despite these improvements, socioeconomic disparity in the use of maternal health services has remained pro-rich, implying that demand-side financing alone will be insufficient to achieve the Millennium Development Goal for maternal health. A comprehensive system-wide approach, including supply-side strengthening, will be needed to adequately address maternal health concerns in poor developing countries. Copyright © 2011 Elsevier Ltd. All rights reserved.

Technological demands of meat processing-An Asian perspective.

PubMed

Zhang, Wangang; Naveena, B Maheswarappa; Jo, Cheorun; Sakata, Ryoichi; Zhou, Guanghong; Banerjee, Rituparna; Nishiumi, Tadayuki

2017-10-01

A rapid increase in the economy, population, industrialization, and urbanization of Asian countries has driven the fast development of their meat industries over recent decades. This consistent increase in meat production and consumption in Asia has been the major cause for the development of the global meat industry. Meat production methods and consumption are very diverse across different regions and countries in Asia, and thus, it is impossible to cover the technological demands of all Asian countries in this review. Here, we have mainly highlighted the differences in meat production methods and consumption in Asia during recent decades and the meat technology demands of three east Asian countries, namely China, Korea, and Japan, and one south Asian country, India. A brief introduction of the meat industry, in particular the production and consumption trend in these countries, is provided in this article. The technology demands for fresh and processed meat products are then reviewed. Copyright © 2017. Published by Elsevier Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutzler, M.J.

Over the next 20 years, the combination of slow growth in the demand for electricity, even slower growth in the need for new capacity, especially baseload capacity, and the competitiveness of new gas-fired technologies limits the market for new coal technologies in the US. In the later years of the 1997 Annual Energy Outlook projections, post-2005, when a significant amount of new capacity is needed to replace retiring plants and meet growing demand, some new coal-fired plants are expected to be built, but new gas-fired plants are expected to remain the most economical choice for most needs. The largest marketmore » for clean coal technologies in the United States may be in retrofitting or repowering existing plants to meet stricter environmental standards, especially over the next 10 years. Key uncertainties include the rate of growth in the demand for electricity and the level of competing fuel prices, particularly natural gas. Higher than expected growth in the demand for electricity and/or relatively higher natural gas prices would increase the market for new coal technologies.« less

Synthesis of 3,4-dihydro-1,8-naphthyridin-2(1H)-ones via microwave-activated inverse electron-demand Diels–Alder reactions

PubMed Central

Fadel, Salah; Hajbi, Youssef; Khouili, Mostafa; Lazar, Said

2014-01-01

Summary Substituted 3,4-dihydro-1,8-naphthyridin-2(1H)-ones have been synthesized with the inverse electron-demand Diels–Alder reaction from 1,2,4-triazines bearing an acylamino group with a terminal alkyne side chain. Alkynes were first subjected to the Sonogashira cross-coupling reaction with aryl halides, the product of which then underwent an intramolecular inverse electron-demand Diels–Alder reaction to yield 5-aryl-3,4-dihydro-1,8-naphthyridin-2(1H)-ones by an efficient synthetic route. PMID:24605148

Synthesis of 3,4-dihydro-1,8-naphthyridin-2(1H)-ones via microwave-activated inverse electron-demand Diels-Alder reactions.

PubMed

Fadel, Salah; Hajbi, Youssef; Khouili, Mostafa; Lazar, Said; Suzenet, Franck; Guillaumet, Gérald

2014-01-01

Substituted 3,4-dihydro-1,8-naphthyridin-2(1H)-ones have been synthesized with the inverse electron-demand Diels-Alder reaction from 1,2,4-triazines bearing an acylamino group with a terminal alkyne side chain. Alkynes were first subjected to the Sonogashira cross-coupling reaction with aryl halides, the product of which then underwent an intramolecular inverse electron-demand Diels-Alder reaction to yield 5-aryl-3,4-dihydro-1,8-naphthyridin-2(1H)-ones by an efficient synthetic route.

Workforce Projections 2010-2020: Annual Supply and Demand Forecasting Models for Physical Therapists Across the United States.

PubMed

Landry, Michel D; Hack, Laurita M; Coulson, Elizabeth; Freburger, Janet; Johnson, Michael P; Katz, Richard; Kerwin, Joanne; Smith, Megan H; Wessman, Henry C Bud; Venskus, Diana G; Sinnott, Patricia L; Goldstein, Marc

2016-01-01

Health human resources continue to emerge as a critical health policy issue across the United States. The purpose of this study was to develop a strategy for modeling future workforce projections to serve as a basis for analyzing annual supply of and demand for physical therapists across the United States into 2020. A traditional stock-and-flow methodology or model was developed and populated with publicly available data to produce estimates of supply and demand for physical therapists by 2020. Supply was determined by adding the estimated number of physical therapists and the approximation of new graduates to the number of physical therapists who immigrated, minus US graduates who never passed the licensure examination, and an estimated attrition rate in any given year. Demand was determined by using projected US population with health care insurance multiplied by a demand ratio in any given year. The difference between projected supply and demand represented a shortage or surplus of physical therapists. Three separate projection models were developed based on best available data in the years 2011, 2012, and 2013, respectively. Based on these projections, demand for physical therapists in the United States outstrips supply under most assumptions. Workforce projection methodology research is based on assumptions using imperfect data; therefore, the results must be interpreted in terms of overall trends rather than as precise actuarial data-generated absolute numbers from specified forecasting. Outcomes of this projection study provide a foundation for discussion and debate regarding the most effective and efficient ways to influence supply-side variables so as to position physical therapists to meet current and future population demand. Attrition rates or permanent exits out of the profession can have important supply-side effects and appear to have an effect on predicting future shortage or surplus of physical therapists. © 2016 American Physical Therapy Association.

Effects of knowing the task duration on players' pacing patterns during soccer small-sided games.

PubMed

Ferraz, Ricardo; Gonçalves, Bruno; Van Den Tillaar, Roland; Jiménez Sáiz, Sergio; Sampaio, Jaime; Marques, Mário C

2018-01-01

The aim of this study was to identify the influence of prior knowledge of exercise duration on players' pacing patterns during soccer small-sided games. Twenty semi-professional male soccer players participated in this study. In the first game scenario, players were not informed how long they would be required to play the small-sided game and the activity was terminated after 20 min (Unknown Condition). In the second game scenario, players were told that they would play the small-sided game for 10 min, but immediately after completing the 10-min game, they were asked to complete another 10 min (Partially Condition). In the third game scenario, players were instructed that they would play the small-sided game for 20 min and then they completed the 20-min game (Known Condition). The results presented a tendency of higher values in all performance variables in the [0'-10'] min compared with the [10'-20'] min. As the players' previous knowledge about the tasks duration increased, the performance between two moments tended to be similar. Considering the entire 20-min game duration, the Partially Condition of the exercise was the most demanding condition. In conclusion, the knowledge of shorter durations of the exercise seems to lead to an increase of exercise duration demand, and longer exercise durations possibly tend to decrease differences between full knowledge and not knowing the exercise duration.

Laparoscopic cholecystectomy poses physical injury risk to surgeons: analysis of hand technique and standing position.

PubMed

Youssef, Yassar; Lee, Gyusung; Godinez, Carlos; Sutton, Erica; Klein, Rosemary V; George, Ivan M; Seagull, F Jacob; Park, Adrian

2011-07-01

This study compares surgical techniques and surgeon's standing position during laparoscopic cholecystectomy (LC), investigating each with respect to surgeons' learning, performance, and ergonomics. Little homogeneity exists in LC performance and training. Variations in standing position (side-standing technique vs. between-standing technique) and hand technique (one-handed vs. two-handed) exist. Thirty-two LC procedures performed on a virtual reality simulator were video-recorded and analyzed. Each subject performed four different procedures: one-handed/side-standing, one-handed/between-standing, two-handed/side-standing, and two-handed/between-standing. Physical ergonomics were evaluated using Rapid Upper Limb Assessment (RULA). Mental workload assessment was acquired with the National Aeronautics and Space Administration-Task Load Index (NASA-TLX). Virtual reality (VR) simulator-generated performance evaluation and a subjective survey were analyzed. RULA scores were consistently lower (indicating better ergonomics) for the between-standing technique and higher (indicating worse ergonomics) for the side-standing technique, regardless of whether one- or two-handed. Anatomical scores overall showed side-standing to have a detrimental effect on the upper arms and trunk. The NASA-TLX showed significant association between the side-standing position and high physical demand, effort, and frustration (p<0.05). The two-handed technique in the side-standing position required more effort than the one-handed (p<0.05). No difference in operative time or complication rate was demonstrated among the four procedures. The two-handed/between-standing method was chosen as the best procedure to teach and standardize. Laparoscopic cholecystectomy poses a risk of physical injury to the surgeon. As LC is currently commonly performed in the United States, the left side-standing position may lead to increased physical demand and effort, resulting in ergonomically unsound conditions for the surgeon. Though further investigations should be conducted, adopting the between-standing position deserves serious consideration as it may be the best short-term ergonomic alternative.

Health workforce needs: projections complicated by practice and technology changes.

PubMed

Cunningham, Rob

2013-10-22

As population growth and the aging of the overall population increase demand for health care, policymakers and analysts posit whether sufficient health care providers will be able to meet that demand. Some argue there are too few providers already; others say our current supply-demand problems lie with efficiency. But suppose both are correct? Perhaps the real challenge is to understand how physician practices are changing in response to market forces such as payment changes, provider distributions, and technology innovations. This issue brief reviews what is known about evolving practice organizations, professional mixes, information technology support, and the implications of these and other factors for public workforce policies.

[Professional debate on shortage of physicians].

PubMed

Gérvas, Juan; Bonis, Julio

2008-01-01

We do not know the best answer to problems due to shortage of physicians (absolute number and by specialities) but perhaps what is important is the lack of a professional debate about what means 'to be' a physician. In this paper we address four key professional questions: 1/ the over-training of physicians when health demand now includes minor problems, 2/ predominance of physician-patient direct encounters in a world of telecommunications and indirect encounters, 3/ the need to delegate power and responsibilities to other health professionals as a consequence of new technology developments and changes in role-design, and 4/ too much emphasis in diagnosis with the danger to initiate cascades with its side-effects. Practical answers to these questions require changes in pre and postgraduate education, improvement in health services organization to profit the use of telecommunications and analysis and re-design of the limits in between professions, levels of care, institutions and health and social sectors.

CERA: 1996 To be watershed year for electric power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Driscoll, M.

1994-05-03

How broadly regulators define open access transmission tops the list of six crucial events that Cambridge Energy Research Associates says will converge in 1996 and create a [open quotes]watershed[close quotes] period that will determine the electric power industry's direction for the next century. Those events likely will involve state regulators and lawmakers, and will be driven by a combination of lower fuel costs and surprising technological advances that make gas turbines more efficient, environmental imperatives and the growing support for competition over regulation. And while some see conventional utilities inevitably weakened because of these changes, it is possible they mightmore » emerge stronger. Besides open access transmission, the other events are: A second generation of independent power producers; A transformation of demand side management programs; Air pollution restrictions; Premature closure of nuclear plants; and Management of risks in long-term natural gas contracting.« less

Space to Think: Large, High-Resolution Displays for Sensemaking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrews, Christopher P.; Endert, Alexander; North, Chris

2010-05-05

Space supports human cognitive abilities in a myriad of ways. The note attached to the side of the monitor, the papers spread out on the desk, diagrams scrawled on a whiteboard, and even the keys left out on the counter are all examples of using space to recall, reveal relationships, and think. Technological advances have made it possible to construct large display environments in which space has real meaning. This paper examines how increased space affects the way displays are regarded and used within the context of the cognitively demanding task of sensemaking. A study was conducted observing analysts usingmore » a prototype large, high-resolution display to solve an analytic problem. This paper reports on the results of this study and suggests a number of potential design criteria for future sensemaking tools developed for large, high-resolution displays.« less

Evidence-informed frameworks for cost-effective cancer care and prevention in low, middle, and high-income countries.

PubMed

Chalkidou, Kalipso; Marquez, Patricio; Dhillon, Preet K; Teerawattananon, Yot; Anothaisintawee, Thunyarat; Gadelha, Carlos Augusto Grabois; Sullivan, Richard

2014-03-01

Evidence-informed frameworks for cost-effective cancer prevention and management are essential for delivering equitable outcomes and tackling the growing burden of cancer in all resource settings. Evidence can help address the demand side pressures (ie, pressures exerted by people who need care) faced by economies with high, middle, and low incomes, particularly in the context of transitioning towards (or sustaining) universal health-care coverage. Strong systems, as opposed to technology-based solutions, can drive the development and implementation of evidence-informed frameworks for prevention and management of cancer in an equitable and affordable way. For this to succeed, different stakeholders-including national governments, global donors, the commercial sector, and service delivery institutions-must work together to address the growing burden of cancer across economies of low, middle, and high income. Copyright © 2014 Elsevier Ltd. All rights reserved.

Volvo and Infiniti drivers' experiences with select crash avoidance technologies.

PubMed

Braitman, Keli A; McCartt, Anne T; Zuby, David S; Singer, Jeremiah

2010-06-01

Vehicle-based crash avoidance systems can potentially reduce crashes, but success depends on driver acceptance and understanding. This study gauged driver use, experience, and acceptance among early adopters of select technologies. Telephone interviews were conducted in early 2009 with 380 owners of Volvo vehicles equipped with forward collision warning with autobrake, lane departure warning, side-view assist, and/or active bi-xenon headlights and 485 owners of Infiniti vehicles with lane departure warning/prevention. Most owners kept systems turned on most of the time, especially forward collision warning with autobrake and side-view assist. The exception was lane departure prevention; many owners were unaware they had it, and the system must be activated each time the vehicle is started. Most owners reported being safer with the technologies and would want them again on their next vehicles. Perceived false or unnecessary warnings were fairly common, particularly with side-view assist. Some systems were annoying, especially lane departure warning. Many owners reported safer driving behaviors such as greater use of turn signals (lane departure warning), increased following distance (forward collision warning), and checking side mirrors more frequently (side-view assist), but some reported driving faster at night (active headlights). Despite some unnecessary or annoying warnings, most Volvo and Infiniti owners use crash avoidance systems most of the time. Among early adopters, the first requirement of effective warning systems (that owners use the technology) seems largely met. Systems requiring activation by drivers for each trip are used less often. Owner experience with the latest technologies from other automobile manufacturers should be studied, as well as for vehicles on which technologies are standard (versus optional) equipment. The effectiveness of technologies in preventing and mitigating crashes and injuries, and user acceptance of interfaces, should be examined as more vehicles with advanced technologies penetrate the fleet.

High Technology and Education: An Economist's View.

ERIC Educational Resources Information Center

Carnoy, Martin

1988-01-01

Explores high technology industries' effects on labor markets, particularly on the division of labor, the organization of work, and the future of education. Discusses implications for demand and the distribution of that demand. Examines certain notions concerning knowledge production and work ethics and organization. Includes 34 references. (MLH)

Virtual presence for mission visualization: computer game technology provides a new approach

NASA Astrophysics Data System (ADS)

Hussey, K.

2007-08-01

The concept of virtual presence for mission and planetary science visualization is to allow the public to "see" in space as if they were either riding aboard or standing next to an ESA/NASA spacecraft. Our approach to accomplishing this goal is to utilize and extend the same technology used by the computer gaming industry.With this technology, people would be able to immediately "look" in any direction from their virtual location and "zoom-in" at will. Whenever real data for their "view" exists it would be incorporated into the scene. Where data is missing, a high-fidelity simulation of the view would be generated to fill in the chosen field of view. The observer could also change the time of observation into the past or future. The potential for the application of this technology for the development of educational curricula is huge. On the engineering side, all allowable spacecraft and environmental parameters that are being measured and sent to Earth would be immediately viewable as if looking at the dashboard of a car or an instrument panel of an aircraft. Historical information could also be displayed upon request. This can revolutionize the way the general public and planetary scientific community views ESA/NASA missions and provides an educational context that is attractive to the younger generation. While conceptually using this technology is quite simple, the cross-discipline technical challenges are very demanding. This technology is currently under development and application at JPL to assist current missions in viewing their data, communicating with the public and visualizing future mission plans. Real-time demonstrations of the technology described will be shown.

Impacts of Groundwater Constraints on Saudi Arabia's Low-Carbon Electricity Supply Strategy.

PubMed

Parkinson, Simon C; Djilali, Ned; Krey, Volker; Fricko, Oliver; Johnson, Nils; Khan, Zarrar; Sedraoui, Khaled; Almasoud, Abdulrahman H

2016-02-16

Balancing groundwater depletion, socioeconomic development and food security in Saudi Arabia will require policy that promotes expansion of unconventional freshwater supply options, such as wastewater recycling and desalination. As these processes consume more electricity than conventional freshwater supply technologies, Saudi Arabia's electricity system is vulnerable to groundwater conservation policy. This paper examines strategies for adapting to long-term groundwater constraints in Saudi Arabia's freshwater and electricity supply sectors with an integrated modeling framework. The approach combines electricity and freshwater supply planning models across provinces to provide an improved representation of coupled infrastructure systems. The tool is applied to study the interaction between policy aimed at a complete phase-out of nonrenewable groundwater extraction and concurrent policy aimed at achieving deep reductions in electricity sector carbon emissions. We find that transitioning away from nonrenewable groundwater use by the year 2050 could increase electricity demand by more than 40% relative to 2010 conditions, and require investments similar to strategies aimed at transitioning away from fossil fuels in the electricity sector. Higher electricity demands under groundwater constraints reduce flexibility of supply side options in the electricity sector to limit carbon emissions, making it more expensive to fulfill climate sustainability objectives. The results of this analysis underscore the importance of integrated long-term planning approaches for Saudi Arabia's electricity and freshwater supply systems.

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

PubMed

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

76 FR 37025 - Make Inoperative Exemptions; Vehicle Modifications To Accommodate People With Disabilities, Side...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... the seat. Many vehicles will depend on side impact air bag technology to meet all of the injury... installing side air bags in vehicle seats and/or door panels and side roof rails. The phase-in of the... expressed concern that: ``* * * torso side air bags are commonly installed in the outboard side of the OEM...

EM&V for Energy Efficiency Policies and Initiatives

EPA Pesticide Factsheets

Learn how representatives of jurisdictions, companies, and other entities can use evaluation, measurement, and verification (EM&V) in demand-side energy efficiency (EE) investments to achieve intended environmental, energy, and economic goals.

High-frequency ultrasonic methods for determining corrosion layer thickness of hollow metallic components.

PubMed

Liu, Hongwei; Zhang, Lei; Liu, Hong Fei; Chen, Shuting; Wang, Shihua; Wong, Zheng Zheng; Yao, Kui

2018-05-16

Corrosion in internal cavity is one of the most common problems occurs in many hollow metallic components, such as pipes containing corrosive fluids and high temperature turbines in aircraft. It is highly demanded to non-destructively detect the corrosion inside hollow components and determine the corrosion extent from the external side. In this work, we present two high-frequency ultrasonic non-destructive testing (NDT) technologies, including piezoelectric pulse-echo and laser-ultrasonic methods, for detecting corrosion of Ni superalloy from the opposite side. The determination of corrosion layer thickness below ∼100 µm has been demonstrated by both methods, in comparison with X-CT and SEM. With electron microscopic examination, it is found that with multilayer corrosion structure formed over a prolonged corrosion time, the ultrasonic NDT methods can only reliably reveal outer corrosion layer thickness because of the resulting acoustic contrast among the multiple layers due to their respective different mechanical parameters. A time-frequency signal analysis algorithm is employed to effectively enhance the high frequency ultrasonic signal contrast for the piezoelectric pulse-echo method. Finally, a blind test on a Ni superalloy turbine blade with internal corrosion is conducted with the high frequency piezoelectric pulser-receiver method. Copyright © 2018 Elsevier B.V. All rights reserved.

Projected configuration of a coal-fired district heating source on the basis of comparative technical-economical optimization analysis

NASA Astrophysics Data System (ADS)

Tańczuk, Mariusz; Radziewicz, Wojciech; Olszewski, Eligiusz; Skorek, Janusz

2017-10-01

District heating technologies should be efficient, effective and environmentally friendly. The majority of the communal heating systems in Poland produce district hot water in coal-fired boilers. A large number of them are considerably worn out, low-efficient in the summer time and will not comply with forthcoming regulations. One of the possible solution for such plants is repowering with new CHP systems or new boilers fuelled with fuels alternative to coal. Optimisation analysis of the target configuration of municipal heat generating plant is analysed in the paper. The work concerns repowering the existing conventional heat generating plant according to eight different scenarios of the plant configuration meeting technical and environmental requirements forecasted for the year of 2035. The maximum demand for heat of the system supplied by the plant is 185 MW. Taking into account different technical configurations on one side, and different energy and fuel prices on the other side, the comparative cost-benefits analysis of the assumed scenarios has been made. The basic economical index NPV (net present value) has been derived for each analysed scenario and the results have been compared and discussed. It was also claimed that the scenario with CHP based on ICE engines is optimal.

Agricultural productivity and greenhouse gas emissions: trade-offs or synergies between mitigation and food security?

NASA Astrophysics Data System (ADS)

Valin, H.; Havlík, P.; Mosnier, A.; Herrero, M.; Schmid, E.; Obersteiner, M.

2013-09-01

In this letter, we investigate the effects of crop yield and livestock feed efficiency scenarios on greenhouse gas (GHG) emissions from agriculture and land use change in developing countries. We analyze mitigation associated with different productivity pathways using the global partial equilibrium model GLOBIOM. Our results confirm that yield increase could mitigate some agriculture-related emissions growth over the next decades. Closing yield gaps by 50% for crops and 25% for livestock by 2050 would decrease agriculture and land use change emissions by 8% overall, and by 12% per calorie produced. However, the outcome is sensitive to the technological path and which factor benefits from productivity gains: sustainable land intensification would increase GHG savings by one-third when compared with a fertilizer intensive pathway. Reaching higher yield through total factor productivity gains would be more efficient on the food supply side but halve emissions savings due to a strong rebound effect on the demand side. Improvement in the crop or livestock sector would have different implications: crop yield increase would bring the largest food provision benefits, whereas livestock productivity gains would allow the greatest reductions in GHG emission. Combining productivity increases in the two sectors appears to be the most efficient way to exploit mitigation and food security co-benefits.

Harnessing solar pressure to slew and point large infrared space telescopes

NASA Astrophysics Data System (ADS)

Errico, Simona; Angel, Roger P.; Calvert, Paul D.; Woof, Neville

2003-03-01

Large astronomical Gossamer telescopes in space will need to employ large solar shields to safeguard the optics from solar radiation. These types of telescopes demand accurate controls to maintain telescope pointing over long integration periods. We propose an active solar shield system that harnesses radiation pressure to accurately slew and acquire new targets without the need for reaction wheels or thrusters. To provide the required torques, the solar shield is configured as an inverted, 4-sided pyramidal roof. The sloped roof interior surfaces are covered with hinged “tiles” made from piezoelectric film bimorphs with specular metallized surfaces. Nominally, the tiles lie flat against the roof and the sunlight is reflected outward equally from all sloped surfaces. However, when the tiles on one roof pitch are raised, the pressure balance is upset and the sunshade is pushed to one side. By judicious selection of the tiles and control of their lift angle, the solar pressure can be harvested to stabilize the spacecraft orientation or to change its angular momentum. A first order conceptual design performance analysis and the results from the experimental design, fabrication and testing of piezoelectric bimorph hinge elements will be presented. Next phase challenges in engineering design, materials technology, and systems testing will be discussed.

Co-Optimization of Electricity Transmission and Generation Resources for Planning and Policy Analysis: Review of Concepts and Modeling Approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krishnan, Venkat; Ho, Jonathan; Hobbs, Benjamin F.

2016-05-01

The recognition of transmission's interaction with other resources has motivated the development of co-optimization methods to optimize transmission investment while simultaneously considering tradeoffs with investments in electricity supply, demand, and storage resources. For a given set of constraints, co-optimized planning models provide solutions that have lower costs than solutions obtained from decoupled optimization (transmission-only, generation-only, or iterations between them). This paper describes co-optimization and provides an overview of approaches to co-optimizing transmission options, supply-side resources, demand-side resources, and natural gas pipelines. In particular, the paper provides an up-to-date assessment of the present and potential capabilities of existing co-optimization tools, andmore » it discusses needs and challenges for developing advanced co-optimization models.« less

Future directions: Integrated resource planning

NASA Astrophysics Data System (ADS)

Bauer, D. C.; Eto, J.

Integrated resource planning or IRP is the process for integrating supply- and demand-side resources to provide energy services at a cost that balances the interests of all stakeholders. It now is the resource planning process used by electric utilities in over 30 states. The goals of IRP have evolved from least cost planning and encouragement of demand-side management to broader, more complex issues including core competitive business activity, risk management and sharing, accounting for externalities, and fuel switching between gas and electricity. IRP processes are being extended to other interior regions of the country, to non-investor owned utilities, and to regional (rather than individual utility) planning bases, and to other fuels (natural gas). The comprehensive, multi-valued, and public reasoning characteristics of IRP could be extended to applications beyond energy, e.g., transportation, surface water management, and health care in ways suggested.

Lessons from reproductive health to inform multipurpose prevention technologies: don't reinvent the wheel.

PubMed

Brady, Martha; Manning, Judy

2013-12-01

This paper presents the public health rationale for multipurpose prevention technologies (MPTs) for sexual and reproductive health (SRH) based on regional trends in demographic and SRH indicators. It then distils important lessons gleaned from the introduction of contraceptive and reproductive health products over the past several decades in order to inform the development and future introduction of MPTs for SRH. A comparison of current demographic and public health regional data clearly revealed that the greatest confluence of women's SRH concerns occurs in sub-Saharan Africa and South/West Asia. These regional overlaps of SRH risks and outcomes present a strong rationale for developing MPTs designed to simultaneously protect against unintended pregnancy, HIV and other STIs. Information from acceptability, marketing, and operations research on the female condom, emergency contraception, pills and intravaginal rings identified key product characteristics and socio-behavioral issues to be considered in the development and introduction of MPTs. Product characteristics such as formulation, duration of action, presence and magnitude of side effects, prescription status (over-the-counter vs. prescribed), provider type and training and user perspectives, all contributed in varying degrees to both provider and user bias, and subsequent uptake of these family planning methods. Underlying socio-behavioral issues, including risk perception, ambivalence, and social costs also contributed to demand and use. Early identification of target populations will be critical to market shaping, demand creation and defining appropriate service delivery channels for MPTs. Ultimately, knowledge, attitudes, perceptions and practices of users (and their partners) will drive the success- or failure- of product introduction. MPTs provide a compelling response to the multiple and reinforcing SRH risks faced by women in key regions of the world, but specific product characteristics and their socio-behavioral correlates must be taken into account early in the development process. Successful introduction of new MPTs will require solid understanding of socio-behavioral correlates, effective demand generation, appropriate integration into health service delivery systems, quality counseling for proper use and active engagement of both public and private sectors. This article is based on a presentation at the "Product Development Workshop 2013: HIV and Multipurpose Prevention Technologies," held in Arlington, Virginia on February 21-22, 2013. It forms part of a special supplement to Antiviral Research. Copyright © 2013 Elsevier B.V. All rights reserved.

JPRS Report West Europe

DTIC Science & Technology

1988-08-01

least; but my partners will have to respect the points I value. [LE SOIR] You once compared Martens to Caligula , and here you are working side by...side with him! [Louis Tobback] I even said that Martens was worse than Caligula . But I was not comparing people, and those who only remember...to ratify a special powers act and then demanded it be ratified because the Council of State said so. Caligula once made the Roman Senate appoint

Energy demand analytics using coupled technological and economic models

EPA Science Inventory

Impacts of a range of policy scenarios on end-use energy demand are examined using a coupling of MARKAL, an energy system model with extensive supply and end-use technological detail, with Inforum LIFT, a large-scale model of the us. economy with inter-industry, government, and c...

The Evolving Demand for Skills.

ERIC Educational Resources Information Center

Greenspan, Alan

From a macroeconomic perspective, the evolving demand for skills in the United States has been triggered by the accelerated expansion of computer and information technology, which has, in turn, brought significant changes to the workplace. Technological advances have made some wholly manual jobs obsolete. But even for many other workers, a rapidly…

Life on the Margins: Stories of Techguides.

ERIC Educational Resources Information Center

Zhao, Yong; Rop, Sheri; Banghart, Rick; Hou, Kaijun; Topper, Andrew

Traditionally, in the intersection of technology and education, two distinct cultures have existed side by side: the "techies"--technologically sophisticated or enthusiastic experts, and the teachers--elementary through higher education. In an effort to bring the two separated cultures together to engineer a new culture and to support…

Water resources of southeastern Oahu, Hawaii

USGS Publications Warehouse

Takasaki, K.J.; Mink, John F.

1982-01-01

Southeastern Oahu comprises the eastern end of the Koolau Range and is divided into two roughly equal parts by the crest of the range. The northside of the crest is commonly called the windward side and the southside, the leeward. Precipitous cliffs aproned by a gently sloping landscape are the main topographic features on the windward side. The leeward side is a gentle lava-flow slope incised by steep narrow valleys. The main Koolau fissure zone, including the caldera, lies on the windward side. The leeward side includes minor rift zones that are perpendicular to and intersect the main fissure zone. Dikes in the main fissure zone strike from nearly east-west in the eastern end to about N. 55? W. in the western part. Dikes in the minor rift zones strike from north-south to slightly northeasterly. Water use is about 18 Mgal/d (million gallons per day) of which only 4 Mgal/d is obtained locally from ground-water sources. About a third of the 14 Mgal/d deficit is imported from sources northwest of the study area on the windward side and the remainder from sources in the Honolulu and Pearl Harbor areas on the leeward side. The 4 Mgal/d being developed represents only about 3 percent of the area's rainfall compared to a development-rainfall ratio of 20 percent for the rest of the island. Streams are short and flashy. Perennial streamflow to the sea occurs only in Maunawili Valley and in the Waimanalo area. Mean annual discharge is estimated at 20 Mgal/d in the windward side and at 15 Mgal/d on the leeward side. Low flow, expressed as the flow that is equaled or exceeded 90 percent of the time, is 5 Mgal/d windward of the crest and zero leeward of it. Most fresh ground water occurs in lava flows of the Koolau Volcanics. It is impounded by dikes in the rift zones and floats on saline ground water as lenses outside the rift zones. Small but important bodies of freshwater are perched in volcanic rocks of the Honolulu Group in Maunawili Valley. Fresh ground water occurs in near-shore calcareous sands that overlie a clay horizon in the Waimanalo area. Deeply buried talus and alluvium also carry fresh ground water in the Waimanalo area. Wells tapping saline ground water in fresh lava flows of the Honolulu Group provide water for a sea-life park in the Makapuu area. The same aquifer is tapped by wells for disposal of the saline waste water. The current development scheme in the windward side that utilizes only the free-flow equilibrium discharge of dike-impounded water is inefficient and does not cope with the annual weather cycle. The flow available for development under this scheme is greatest in the rainy winter months when demand is the lowest and least in the summer months when demand is the highest. A more optimal scheme would be to change this natural flow pattern by depleting storage by pumping to increase flow in the high-demand summer months and allowing the depleted storage to recover naturally in the low-demand winter months. Depleting storage would lower water levels which would provide more room for infiltration and provide less opportunity for evapotranspiration. The basal-water reservoir in the leeward side is isolated hydrologically from abutting reservoirs outside the area and can and should be fully exploited. The existing development of the basal-water reservoir is small compared to the natural ground-water flow and that part not being developed is wasting to the sea. Because the area is hydrologically isolated, development will not be detrimental to or reduce the ground-water supply outside the area.

District nurses' conceptions of medical technology in palliative homecare.

PubMed

Munck, Berit; Fridlund, Bengt; Mårtensson, Jan

2011-10-01

The aim of this study was to describe district nurses' conceptions of medical technology in palliative homecare. Medical technology has, in recent years, been widely used in palliative homecare. Personnel with varying degrees of training and knowledge must be able to handle the new technology. A descriptive design with a phenomenographic approach was chosen to describe qualitatively different conceptions of the phenomenon medical technology. Interviews with 16 district nurses working with palliative homecare were analysed and five descriptive categories emerged. Medical technology in palliative homecare led to vulnerability because of increasing demands and changing tasks. When medical technology was used in the home it demanded collaboration between all involved actors. It also demanded self-reliance and an awareness of managing medical technology in a patient-safe way. Medical technology provided freedom for the palliative patients. To maintain patient safety, more education and collaboration with palliative care teams is needed. Next-of-kin are considered as an important resource but their participation must be based on their own conditions. District nurses need regular training on medical devices, must be more specialized in this kind of care and must not fragment their working time within other specialities. © 2011 Blackwell Publishing Ltd.

Fractional ablative laser skin resurfacing: a review.

PubMed

Tajirian, Ani L; Tarijian, Ani L; Goldberg, David J

2011-12-01

Ablative laser technology has been in use for many years now. The large side effect profile however has limited its use. Fractional ablative technology is a newer development which combines a lesser side effect profile along with similar efficacy. In this paper we review fractional ablative laser skin resurfacing.

West Europe Report, Science and Technology, No. 152.

DTIC Science & Technology

1983-08-12

Technology (created 3 years ago by the CGE group), who recently won a contract to supply an automated ticketing system for Buffalo’s subway . But...plastic sandwich construction. The strut junction fairing between the struts and the lower side of the wing, the upper side of the fuselage and the

Technological Advances in Deep Brain Stimulation.

PubMed

Ughratdar, Ismail; Samuel, Michael; Ashkan, Keyoumars

2015-01-01

Functional and stereotactic neurosurgery has always been regarded as a subspecialty based on and driven by technological advances. However until recently, the fundamentals of deep brain stimulation (DBS) hardware and software design had largely remained stagnant since its inception almost three decades ago. Recent improved understanding of disease processes in movement disorders as well clinician and patient demands has resulted in new avenues of development for DBS technology. This review describes new advances both related to hardware and software for neuromodulation. New electrode designs with segmented contacts now enable sophisticated shaping and sculpting of the field of stimulation, potentially allowing multi-target stimulation and avoidance of side effects. To avoid lengthy programming sessions utilising multiple lead contacts, new user-friendly software allows for computational modelling and individualised directed programming. Therapy delivery is being improved with the next generation of smaller profile, longer-lasting, re-chargeable implantable pulse generators (IPGs). These include IPGs capable of delivering constant current stimulation or personalised closed-loop adaptive stimulation. Post-implantation Magnetic Resonance Imaging (MRI) has long been an issue which has been partially overcome with 'MRI conditional devices' and has enabled verification of DBS lead location. Surgical technique is considering a shift from frame-based to frameless stereotaxy or greater role for robot assisted implantation. The challenge for these contemporary techniques however, will be in demonstrating equivalent safety and accuracy to conventional methods. We also discuss potential future direction utilising wireless technology allowing for miniaturisation of hardware.

Response of Bean (Vicia faba L.) Plants to Low Sink Demand by Measuring the Gas Exchange Rates and Chlorophyll a Fluorescence Kinetics

PubMed Central

Liu, Guo-Tian; Xu, Hong-Guo; Wang, Li-Jun; Li, Shao-Hua

2013-01-01

Background The decline of photosynthesis in plants under low sink demand is well known. Previous studies focused on the relationship between stomatal conductance (g s) and net photosynthetic rate (P n). These studies investigated the effect of changes in Photosystem II (PSII) function on the P n decline under low sink demand. However, little is known about its effects on different limiting steps of electron transport chain in PSII under this condition. Methodology/Principal Finding Two-month-old bean plants were processed by removing pods and flowers (low sink demand). On the 1st day after low sink demand treatment, a decline of P n was accompanied by a decrease in g s and internal-to-ambient CO2 concentration ratio (C i/C a). From the 3rd to 9th day, P n and g s declined continuously while C i/C a ratio remained stable in the treatment. Moreover, these values were lower than that of control. Wk (a parameter reflecting the damage to oxygen evolving complex of the donor side of PSII) values in the treatment were significantly higher than their corresponding control values. However, RCQA (a parameter reflecting the number of active RCs per excited cross-section of PSII) values in the treatment were significantly lower than control from the 5th day. From the 11th to 21st day, P n and g s of the treatment continued to decline and were lower than control. This was accompanied by a decrease of RCQA, and an increase of Wk. Furthermore, the quantum yield parameters φ Po, φ Eo and ψ Eo in the treatment were lower than in control; however, C i/C a values in the treatment gradually increased and were significantly higher than control on the 21st day. Conclusions Stomatal limitation during the early stage, whereas a combination of stomatal and non-stomatal limitation during the middle stage might be responsible for the reduction of P n under low sink demand. Non-stomatal limitation during the late stages after the removal of the sink of roots and pods may also cause P n reduction. The non-stomatal limitation was associated with the inhibition of PSII electron transport chain. Our data suggests that the donor side of PSII was the most sensitive to low sink demand followed by the reaction center of PSII. The acceptor side of PSII may be the least sensitive. PMID:24324626

Investigation of thin n-in-p planar pixel modules for the ATLAS upgrade

NASA Astrophysics Data System (ADS)

Savic, N.; Beyer, J.; La Rosa, A.; Macchiolo, A.; Nisius, R.

2016-12-01

In view of the High Luminosity upgrade of the Large Hadron Collider (HL-LHC), planned to start around 2023-2025, the ATLAS experiment will undergo a replacement of the Inner Detector. A higher luminosity will imply higher irradiation levels and hence will demand more radiation hardness especially in the inner layers of the pixel system. The n-in-p silicon technology is a promising candidate to instrument this region, also thanks to its cost-effectiveness because it only requires a single sided processing in contrast to the n-in-n pixel technology presently employed in the LHC experiments. In addition, thin sensors were found to ensure radiation hardness at high fluences. An overview is given of recent results obtained with not irradiated and irradiated n-in-p planar pixel modules. The focus will be on n-in-p planar pixel sensors with an active thickness of 100 and 150 μm recently produced at ADVACAM. To maximize the active area of the sensors, slim and active edges are implemented. The performance of these modules is investigated at beam tests and the results on edge efficiency will be shown.

Compact erbium lasers in the IR photorefractive keratectomy (PRK)

NASA Astrophysics Data System (ADS)

Liu, Baining; Eichler, Hans J.; Sperlich, O.; Holschbach, A.; Kayser, M.

1996-09-01

Erbium lasers deliver laser radiation near 3 micrometers and are a promising alternative to excimer laser photorefractive keratectomy (UV-PRK). In addition to easier handling due to all solid state technology, especially when operated in the fundamental mode, IR-PRK eliminates the potential of mutagenic side effects associated with UV-PRK. However, a successful IR-PRK for the clinic treatment in the near future demands both technological development of erbium lasers in different operation modes and clinical investigation of interaction between 3 micrometers radiation and human corneas. The excellent cooperation between university, company and hospital makes this possible. Uncoated thin plates made from infrared materials were found to be effective etalon reflectors with high damage threshold as high as 1 GW/cm2 for erbium lasers. Four kinds of such reflectors were successfully tested in Q-switched Er:YAG-laser at 2.94 micrometers and Er:Cr:YSGG-laser at 2.80 micrometers. Very stable operation of our erbium lasers with high output energy both in free-running and Q-switched modes is realized. First infrared photorefractive keratectomy (IR-PRK) for myopic correction in human corneas by a free-running erbium laser based on our new construction concepts was achieved.

Emerging high technology fields and thoughts on reshaping the engineering curriculum.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuzay, T. M.

1999-04-09

In the early part of this workshop, I believe Dr. Bergles made a statement indicating that certain schools in America are planning to take the traditional heat transfer and fluid mechanics courses out of their curriculum and that some may have already done so. That statement created some excitement, and I did respond to that in some fashion and make some suggestions. Then Dr. Bergles said ''well maybe these matters should be included in a separate discussion period,'' which is this forum. Because I am working at the Advanced Photon Source at Argonne National Laboratory, I have the opportunity tomore » witness the type of research being done in high technology areas today with the most advanced x-rays, which gives me some sort of advantage for telling you what I see as future research directions. Hence, I would like to reflect on all of this along a different avenue, and really my presentation will stress the educational side: essentially engineering education and what our role should be at the universities in teaching the next generation of students coming in and also what our role should be in retraining researchers for the demands of the emerging fields and markets.« less

Aviation Frontiers: On-Demand Aircraft

NASA Technical Reports Server (NTRS)

Moore, Mark D.

2010-01-01

Throughout the 20th Century, NASA has defined the forefront of aeronautical technology, and the aviation industry owes much of its prosperity to this knowledge and technology. In recent decades, centralized aeronautics has become a mature discipline, which raises questions concerning the future aviation innovation frontiers. Three transformational aviation capabilities, bounded together by the development of a Free Flight airspace management system, have the potential to transform 21st Century society as profoundly as civil aviation transformed the 20th Century. These mobility breakthroughs will re-establish environmental sustainable centralized aviation, while opening up latent markets for civil distributed sensing and on-demand rural and regional transportation. Of these three transformations, on-demand aviation has the potential to have the largest market and productivity improvement to society. The information system revolution over the past 20 years shows that vehicles lead, and the interconnecting infrastructure to make them more effective follows; that is, unless on-demand aircraft are pioneered, a distributed Air Traffic Control system will likely never be established. There is no single technology long-pole that will enable on-demand vehicle solutions. However, fully digital aircraft that include electric propulsion has the potential to be a multi-disciplinary initiator of solid state technologies that can provide order of magnitude improvements in the ease of use, safety/reliability, community and environmental friendliness, and affordability.

Using bibliographic databases in technology transfer

NASA Technical Reports Server (NTRS)

Huffman, G. David

1987-01-01

When technology developed for a specific purpose is used in another application, the process is called technology transfer--the application of an existing technology to a new use or user for purposes other than those for which the technology was originally intended. Using Bibliographical Databases in Technology Transfer deals with demand-pull transfer, technology transfer that arises from need recognition, and is a guide for conducting demand-pull technology transfer studies. It can be used by a researcher as a self-teaching manual or by an instructor as a classroom text. A major problem of technology transfer is finding applicable technology to transfer. Described in detail is the solution to this problem, the use of computerized, bibliographic databases, which currently contain virtually all documented technology of the past 15 years. A general framework for locating technology is described. NASA technology organizations and private technology transfer firms are listed for consultation.

Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam.

PubMed

Nguyen, Phuong H; Kim, Sunny S; Nguyen, Tuan T; Tran, Lan M; Hajeebhoy, Nemat; Frongillo, Edward A; Ruel, Marie T; Rawat, Rahul; Menon, Purnima

2016-01-01

Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF), but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children <2y (n = 1,008) and health staff (n = 60) from the evaluation of a program that embedded IYCF counseling into the existing government health system. The frequency of never users, one-time users, repeat users, and achievers of the recommended minimum number of visits at health facilities were 45.1%, 13.0%, 28.4% and 13.5%, respectively. Poisson regression showed that demand-generation strategies, especially invitation cards, were the key factors determining one-time use (Prevalence ratio, PR 3.0, 95% CI: 2.2-4.2), repeated use (PR 3.2, 95% CI: 2.4-4.2), and achievement of minimum visits (PR 5.5, 95% CI: 3.6-8.4). Higher maternal education was associated with higher utilization both for one-time and repeated use. Being a farmer, belonging to an ethnic minority, and having a wasted child were associated with greater likelihood of achieving the minimum recommended number of visits, whereas child stunting or illness were not. Distance to health center was a barrier to repeated visits. Among supply-side factors, good counselling skills (PR: 1.3-1.8) was the most important factor associated with any service use, whereas longer employment duration and greater work pressure of health center staff were associated with lower utilization. Population attributable risk estimations showed that an additional 25% of the population would have achieved the minimum number of visits if exposed to three demand-generation strategies, and further increased to 49% if the health staff had good counseling skills and low work pressure. Our study provides evidence that demand-generation strategies are essential to increase utilization of facility-based IYCF counselling services in Viet Nam, and may be relevant for increasing and sustaining use of nutrition services in similar contexts.

Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam

PubMed Central

Nguyen, Phuong H.; Kim, Sunny S.; Nguyen, Tuan T.; Tran, Lan M.; Hajeebhoy, Nemat; Frongillo, Edward A.; Ruel, Marie T.; Rawat, Rahul; Menon, Purnima

2016-01-01

Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF), but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children <2y (n = 1,008) and health staff (n = 60) from the evaluation of a program that embedded IYCF counseling into the existing government health system. The frequency of never users, one-time users, repeat users, and achievers of the recommended minimum number of visits at health facilities were 45.1%, 13.0%, 28.4% and 13.5%, respectively. Poisson regression showed that demand-generation strategies, especially invitation cards, were the key factors determining one-time use (Prevalence ratio, PR 3.0, 95% CI: 2.2–4.2), repeated use (PR 3.2, 95% CI: 2.4–4.2), and achievement of minimum visits (PR 5.5, 95% CI: 3.6–8.4). Higher maternal education was associated with higher utilization both for one-time and repeated use. Being a farmer, belonging to an ethnic minority, and having a wasted child were associated with greater likelihood of achieving the minimum recommended number of visits, whereas child stunting or illness were not. Distance to health center was a barrier to repeated visits. Among supply-side factors, good counselling skills (PR: 1.3–1.8) was the most important factor associated with any service use, whereas longer employment duration and greater work pressure of health center staff were associated with lower utilization. Population attributable risk estimations showed that an additional 25% of the population would have achieved the minimum number of visits if exposed to three demand-generation strategies, and further increased to 49% if the health staff had good counseling skills and low work pressure. Our study provides evidence that demand-generation strategies are essential to increase utilization of facility-based IYCF counselling services in Viet Nam, and may be relevant for increasing and sustaining use of nutrition services in similar contexts. PMID:26962856

City of San Antonio, Texas Better Buildings Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, Liza C.; Hammer, Mary C.

2014-06-30

The San Antonio Better Buildings Program is a unified single-point-of-service energy efficiency delivery mechanism targeting residential, commercial, institutional, industrial and public buildings. This comprehensive and replicable energy efficiency program is designed to be an effective demand side management initiative to provide a seamless process for program participants to have turn-key access to expert analysis, support and incentives to improve the performance of their in-place energy using systems, while reducing electrical energy use and demand.

Assessing demand-side barriers to uptake of intermittent preventive treatment for malaria in pregnancy: a qualitative study in two regions of Uganda.

PubMed

Rassi, Christian; Graham, Kirstie; King, Rebecca; Ssekitooleko, James; Mufubenga, Patrobas; Gudoi, Sam Siduda

2016-11-04

To prevent malaria infection during pregnancy in endemic areas in Africa, the World Health Organization recommends the administration of intermittent preventive treatment in pregnancy (IPTp) as part of the focused antenatal care package. However, IPTp uptake in most countries remains low despite generally high antenatal care coverage and increased efforts by governments to address known bottlenecks such as drug stock-outs. The study explored factors that continue to impede uptake of IPTp among women who attend antenatal care. This paper focuses on demand-side barriers with regard to accessibility, affordability and acceptability. The research was conducted in 2013/2014 and involved 46 in-depth interviews with four types of respondents: (i) seven district health officials; (ii) 15 health workers; (iii) 19 women who attended antenatal care; (iv) five opinion leaders. Interviews were conducted in Eastern and West Nile regions of Uganda. Data was analysed by thematic analysis. District health officials and health workers cited a range of barriers relating to knowledge and attitudes among pregnant women, including lack of awareness of pregnancy-related health risks, a tendency to initiate antenatal care late, reluctance to take medication and concerns about side effects of IPTp. However, women and opinion leaders expressed very positive views of antenatal care and IPTp. They also reported that the burden of travel and cost associated with antenatal care attendance was challenging, but did not keep them from accessing a service they perceived as beneficial. The role of trust in health workers' expertise was highlighted by all respondents and it was reported that women will typically accept IPTp if encouraged by a health worker. Given the positive views of antenatal care and IPTp, high antenatal care coverage and reported low refusal rates for IPTp, supply-side issues are likely to account for the majority of missed opportunities for the provision of IPTp when women attend antenatal care. However, to increase uptake of IPTp on the demand side, health workers should be encouraged to reassure eligible women that IPTp is safe.

A Nation of Opportunity: Building America's 21st Century Workforce.

ERIC Educational Resources Information Center

National Alliance of Business, Inc., Washington, DC.

Advances in information technology (IT) are reshaping the U.S. labor market. The demand for workers who can read and understand complex material, think analytically, and use technology efficiently will continue to increase. Congress established the 21st Century Workforce Commission to assess current and future demand for IT workers and the…

Modeling and optimization of a hybrid solar combined cycle (HYCS)

NASA Astrophysics Data System (ADS)

Eter, Ahmad Adel

2011-12-01

The main objective of this thesis is to investigate the feasibility of integrating concentrated solar power (CSP) technology with the conventional combined cycle technology for electric generation in Saudi Arabia. The generated electricity can be used locally to meet the annual increasing demand. Specifically, it can be utilized to meet the demand during the hours 10 am-3 pm and prevent blackout hours, of some industrial sectors. The proposed CSP design gives flexibility in the operation system. Since, it works as a conventional combined cycle during night time and it switches to work as a hybrid solar combined cycle during day time. The first objective of the thesis is to develop a thermo-economical mathematical model that can simulate the performance of a hybrid solar-fossil fuel combined cycle. The second objective is to develop a computer simulation code that can solve the thermo-economical mathematical model using available software such as E.E.S. The developed simulation code is used to analyze the thermo-economic performance of different configurations of integrating the CSP with the conventional fossil fuel combined cycle to achieve the optimal integration configuration. This optimal integration configuration has been investigated further to achieve the optimal design of the solar field that gives the optimal solar share. Thermo-economical performance metrics which are available in the literature have been used in the present work to assess the thermo-economic performance of the investigated configurations. The economical and environmental impact of integration CSP with the conventional fossil fuel combined cycle are estimated and discussed. Finally, the optimal integration configuration is found to be solarization steam side in conventional combined cycle with solar multiple 0.38 which needs 29 hectare and LEC of HYCS is 63.17 $/MWh under Dhahran weather conditions.

Ground and Aerial Digital Documentation of Cultural Heritage: Providing Tools for 3d Exploitation of Archaeological Data

NASA Astrophysics Data System (ADS)

Cantoro, G.

2017-02-01

Archaeology is by its nature strictly connected with the physical landscape and as such it explores the inter-relations of individuals with places in which they leave and the nature that surrounds them. Since its earliest stages, archaeology demonstrated its permeability to scientific methods and innovative techniques or technologies. Archaeologists were indeed between the first to adopt GIS platforms (since already almost three decades) on large scale and are now between the most demanding customers for emerging technologies such as digital photogrammetry and drone-aided aerial photography. This paper aims at presenting case studies where the "3D approach" can be critically analysed and compared with more traditional means of documentation. Spot-light is directed towards the benefits of a specifically designed platform for user to access the 3D point-clouds and explore their characteristics. Beside simple measuring and editing tools, models are presented in their actual context and location, with historical and archaeological information provided on the side. As final step of a parallel project on geo-referencing and making available a large archive of aerial photographs, 3D models derived from photogrammetric processing of images have been uploaded and linked to photo-footprints polygons. Of great importance in such context is the possibility to interchange the point-cloud colours with satellite imagery from OpenLayers. This approach makes it possible to explore different landscape configurations due to time-changes with simple clicks. In these cases, photogrammetry or 3D laser scanning replaced, sided or integrated legacy documentation, creating at once a new set of information for forthcoming research and ideally new discoveries.

Space Images for NASA JPL Android Version

NASA Technical Reports Server (NTRS)

Nelson, Jon D.; Gutheinz, Sandy C.; Strom, Joshua R.; Arca, Jeremy M.; Perez, Martin; Boggs, Karen; Stanboli, Alice

2013-01-01

This software addresses the demand for easily accessible NASA JPL images and videos by providing a user friendly and simple graphical user interface that can be run via the Android platform from any location where Internet connection is available. This app is complementary to the iPhone version of the application. A backend infrastructure stores, tracks, and retrieves space images from the JPL Photojournal and Institutional Communications Web server, and catalogs the information into a streamlined rating infrastructure. This system consists of four distinguishing components: image repository, database, server-side logic, and Android mobile application. The image repository contains images from various JPL flight projects. The database stores the image information as well as the user rating. The server-side logic retrieves the image information from the database and categorizes each image for display. The Android mobile application is an interfacing delivery system that retrieves the image information from the server for each Android mobile device user. Also created is a reporting and tracking system for charting and monitoring usage. Unlike other Android mobile image applications, this system uses the latest emerging technologies to produce image listings based directly on user input. This allows for countless combinations of images returned. The backend infrastructure uses industry-standard coding and database methods, enabling future software improvement and technology updates. The flexibility of the system design framework permits multiple levels of display possibilities and provides integration capabilities. Unique features of the software include image/video retrieval from a selected set of categories, image Web links that can be shared among e-mail users, sharing to Facebook/Twitter, marking as user's favorites, and image metadata searchable for instant results.

Optometric supply and demand in Australia: 2011-2036.

PubMed

Healy, Ernest; Kiely, Patricia M; Arunachalam, Dharma

2015-05-01

The effective size of the optometric workforce is dependent on graduate numbers, retention rates and immigration and is influenced by age, gender and working hours of optometrists. This paper presents modelling results of the relationship between the projected Australian optometric workforce and projected demand for optometric services for the period 2011 to 2036. Nine hypothetical optometric supply-side and demand-side scenarios are presented. Data from the Australian Bureau of Statistics on age and gender of people listing optometry as their major qualification in the 2011 census were projected over a 25-year period, accounting for factors such as concordance with Health Workforce Australia figures for registered optometrists in Australia in 2011, ageing, attrition, hours worked, new graduates and immigration. Data were compared to the numbers of optometrists calculated as necessary to meet the demand for services of the Australian population to 2036 using nine different scenarios. It was estimated that there would be a surplus of over 1,200 equivalent full-time optometrists (EFTO) in 2036 for the highest service demand scenario of 13.8 million Medicare services, where 21 hours of a 38-hour week per EFTO were allowed for the provision of optometric services under Medicare. Substantial surpluses were predicted in all states and territories except Queensland, Tasmania and the Northern Territory where predicted supply was within six EFTO of predicted demand. Projections using current weightings for mortality, attrition, proportion of optometrists in active practice, working hours, immigration, new graduates and 21 hours per EFTO per week available for Medicare services indicate that in 2036, there will be excess optometrists in relation to projected demand for services, if service utilisation is maintained at current levels or increased by 10 or 20 per cent. Substantially greater excesses result if each EFTO has 28 or 35 hours per week available for Medicare services. © 2015 The Authors. Clinical and Experimental Optometry © 2015 Optometry Australia.

Marine Bioacoustics: Soundtracks for the Future

DTIC Science & Technology

2015-09-30

opportunity to work side by side with world experts using state-of-the- art tools and technologies. A secondary goal of the project is to provide a...we provide students with a unique opportunity to learn and work side by side with top scientists using state-of-the- art bioacoustic tools and

Trends of Training Courses Conducted in the Human Resources Development Center of the National Institute for Quantum and Radiological Science and Technology After the Fukushima Dai-Ichi Nuclear Power Plant Accident.

PubMed

Shimizu, Yuko; Iida, Haruzo; Nenoi, Mitsuru

2017-07-01

Environmental contamination with radioactive materials caused by the Fukushima Dai-ichi Nuclear Power Plant (NPP) accident in 2011 raised a serious health concern among residents in Japan, and the demand for radiation experts who can handle the radiation-associated problems has increased. The Human Resources Development Center (HRDC) of the National Institute of for Quantum and Radiological Science and Technology in Japan has offered a variety of training programs covering a wide range of technologies associated with radiation since 1959. In this study, the time-course change in the number and age of the applicants for training programs regularly scheduled at HRDC were analyzed to characterize the demand after the NPP accident. The results suggested that the demand for the training of industrial radiation experts elevated sharply after the NPP accident followed by a prompt decrease, and that young people were likely stimulated to learn the basics of radiation. The demand for the training of medical radiation experts was kept high regardless of the NPP accident. The demand for the training of radiation emergency experts fluctuated apparently with three components: a terminating demand after the criticality accident that occurred in 1999, an urgent demand for handling of the NPP accident, and a sustained demand from local governments that undertook reinforcement of their nuclear disaster prevention program. The demand for the training of school students appeared to be increasing after the NPP accident. It could be foreseen that the demand for training programs targeting young people and medical radiation experts would be elevated in future.

A historical analysis of natural gas demand

NASA Astrophysics Data System (ADS)

Dalbec, Nathan Richard

This thesis analyzes demand in the US energy market for natural gas, oil, and coal over the period of 1918-2013 and examines their price relationship over the period of 2007-2013. Diagnostic tests for time series were used; Augmented Dickey-Fuller, Kwiatkowski-Phillips-Schmidt-Shin, Johansen cointegration, Granger Causality and weak exogeneity tests. Directed acyclic graphs were used as a complimentary test for endogeneity. Due to the varied results in determining endogeneity, a seemingly unrelated regression model was used which assumes all right hand side variables in the three demand equations were exogenous. A number of factors were significant in determining demand for natural gas including its own price, lagged demand, a number of structural break dummies, and trend, while oil indicate some substitutability with natural gas. An error correction model was used to examine the price relationships. Natural gas price was found not to have a significant cointegrating vector.

39 CFR 3050.22 - Documentation supporting attributable cost estimates in the Postal Service's section 3652 report.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Demand Side Variability, and Network Variability studies, including input data, processing programs, and... should include the product or product groups carried under each listed contract; (k) Spreadsheets and...

Demand management and case management: a conservation strategy.

PubMed

Bryant, C D R Anna K

2007-01-01

This article reviews the history and development of managed competition, and explores the possibilities of a new demand management strategy in the context of nurse case management to offer less costly, higher quality care for a greater number of patients. The article examines the history and principles of healthcare demand management, its implementation in the hospital and clinical practices of nurse case managers, and its impacts in reducing costs while maintaining care levels. The article develops and analyzes the conflicts and common ground between demand management and case management. First, demand-side strategies can be effective in reducing costs while maintaining quality of nursing care; second, nurse case managers should employ patient education, self-care, and staffing solutions to manage demand. Nurse case managers must apply demand management principles carefully. Their goal is not to restrict care, but to maintain the highest levels of care possible within the limits of their practice's resources and staffing. Two critical themes emerge: (1) demand management is a potential alternative to market-driven managed competition and (2) nursing case management can affect an effective form of demand management. However, the long-term implications of these nursing case management strategies on healthcare staffing need further exploration.

Is health care a luxury or a necessity or both? Evidence from Turkey.

PubMed

Yavuz, Nilgun Cil; Yilanci, Veli; Ozturk, Zehra Ayca

2013-02-01

This study investigates the effect of per capita income on per capita health expenditures in Turkey over the period 1975-2007 by using ARDL bounds test approach to the cointegration considering both demand and supply side variables. Since we reject the null hypothesis that there is no cointegration among the series, we estimate long run and short run elasticities. The results show that while income has no effect on health expenditures in the long run, it is a necessity good in the short run that is a 1% increase in per capita income creates an 0.75% increase in per capita health expenditures. On the other hand, by examining the coefficient of demand and supply side variables, we found that average length of stay and number of physicians has negative effect, percentage of older people has positive effect and infant mortality rate has no effect on health expenditures in both short and long runs.

Demand-side management: Why ratemaking should`nt control tax policy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haney, J.D.

1995-01-01

As utilities spend money on demand-side management (DSM) programs, they usually deduct their costs currently as ordinary and necessary business expenses. However, state regulators may force deferral of DSM costs for ratemaking purposes, with possible consequences on tax returns. When regulators defer DSM costs, the Internal Revenue Service (IRS) has offered several theories to challenge current tax deductions. One theory requires capitilization instead of a current deduction if regulators include the DSM cost in rate base and provide for a rate of return on the balance. The IRS explained this theory two years ago in a White Paper on conservationmore » expenses: The direct relationship between a rate of return allowed by the Regulator for conservation expenditures allowed in rate base and future profits establishes a prima facie case for capitalization under the future benefit standard. The authors believe that IRS policy should not be linked to ratemaking decisions.« less

A demand-side view of risk adjustment.

PubMed

Feldman, R; Dowd, B E; Maciejewski, M

2001-01-01

This paper analyzes the efficient allocation of consumers to health plans. Specifically, we address the question of why employers that offer multiple health plans often make larger contributions to the premiums of the high-cost plans. Our perspective is that the subsidy for high-cost plans represents a form of demand-side risk adjustment that improves efficiency. Without such subsidies (and in the absence of formal risk adjustment), too few employees would choose the high-cost plans preferred by high-risk workers. We test the theory by estimating a model of the employer premium subsidy, using data from a survey of large public employers in 1994. Our empirical analysis shows that employers are more likely to subsidize high-cost plans when the benefits of risk adjustment are greater. The findings suggest that the premium subsidy can accomplish some of the benefits of formal risk adjustment.

Demand-side management glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isaksen, L.; Ignelzi, P.C.

1992-10-01

Demand-side management (DSM) plays an increasingly important role in helping utilities meet capacity needs while addressing important customer service issues. In implementing utility-specific programs, however, DSM professionals have created an entire vocabulary of words and phrases that are often used and interpreted in very different ways by people with similar utility planning backgrounds. Such inconsistent terminology can hamper the very communication DSM seeks to support. Thus, this report-the first of its kind-presents a glossary of DSM terms, grouped under five major categories: (1) utility systems, (2) programs and techniques, (3) costs, revenues, and rates, (4) modeling and analysis, and (5)more » marketing. An index facilitates the rapid search for key words. This glossary together with a complimentary report entitled, Electric Utility DSM Programs: Terminology and Reporting Formats attempts to define some of the most common terms used in DSM today.« less

Demand-side management glossary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isaksen, L.; Ignelzi, P.C.

1992-10-01

Demand-side management (DSM) plays an increasingly important role in helping utilities meet capacity needs while addressing important customer service issues. In implementing utility-specific programs, however, DSM professionals have created an entire vocabulary of words and phrases that are often used and interpreted in very different ways by people with similar utility planning backgrounds. Such inconsistent terminology can hamper the very communication DSM seeks to support. Thus, this report-the first of its kind-presents a glossary of DSM terms, grouped under five major categories: (1) utility systems, (2) programs and techniques, (3) costs, revenues, and rates, (4) modeling and analysis, and (5)more » marketing. An index facilitates the rapid search for key words. This glossary together with a complimentary report entitled, Electric Utility DSM Programs: Terminology and Reporting Formats attempts to define some of the most common terms used in DSM today.« less

Scheduling Non-Preemptible Jobs to Minimize Peak Demand

DOE PAGES

Yaw, Sean; Mumey, Brendan

2017-10-28

Our paper examines an important problem in smart grid energy scheduling; peaks in power demand are proportionally more expensive to generate and provision for. The issue is exacerbated in local microgrids that do not benefit from the aggregate smoothing experienced by large grids. Demand-side scheduling can reduce these peaks by taking advantage of the fact that there is often flexibility in job start times. We then focus attention on the case where the jobs are non-preemptible, meaning once started, they run to completion. The associated optimization problem is called the peak demand minimization problem, and has been previously shown tomore » be NP-hard. These results include an optimal fixed-parameter tractable algorithm, a polynomial-time approximation algorithm, as well as an effective heuristic that can also be used in an online setting of the problem. Simulation results show that these methods can reduce peak demand by up to 50% versus on-demand scheduling for household power jobs.« less

Scheduling Non-Preemptible Jobs to Minimize Peak Demand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yaw, Sean; Mumey, Brendan

Our paper examines an important problem in smart grid energy scheduling; peaks in power demand are proportionally more expensive to generate and provision for. The issue is exacerbated in local microgrids that do not benefit from the aggregate smoothing experienced by large grids. Demand-side scheduling can reduce these peaks by taking advantage of the fact that there is often flexibility in job start times. We then focus attention on the case where the jobs are non-preemptible, meaning once started, they run to completion. The associated optimization problem is called the peak demand minimization problem, and has been previously shown tomore » be NP-hard. These results include an optimal fixed-parameter tractable algorithm, a polynomial-time approximation algorithm, as well as an effective heuristic that can also be used in an online setting of the problem. Simulation results show that these methods can reduce peak demand by up to 50% versus on-demand scheduling for household power jobs.« less

Biomass Scenario Model: BETO Analysis Platform Peer Review; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bush, B.

2015-03-23

The Biomass Scenario Model (BSM) is a unique, carefully validated, state-of-the-art fourth-generation model of the domestic bioenergy supply chain which explicitly focuses on policy issues and their potential side effects. It integrates resource availability, behavior, policy, and physical, technological, and economic constraints. The BSM uses system-dynamics simulation to model dynamic interactions across the supply chain; it tracks the deployment of biofuels given technological development and the reaction of the investment community to those technologies in the context of land availability, the competing oil market, consumer demand for biofuels, and government policies over time. It places a strong emphasis on themore » behavior and decision-making of various economic agents. The model treats the major infrastructure-compatible fuels. Scenario analysis based on the BSM shows that the biofuels industry tends not to rapidly thrive without significant external actions in the early years of its evolution. An initial focus for jumpstarting the industry typically has strongest results in the BSM in areas where effects of intervention have been identified to be multiplicative. In general, we find that policies which are coordinated across the whole supply chain have significant impact in fostering the growth of the biofuels industry and that the production of tens of billions of gallons of biofuels may occur under sufficiently favorable conditions.« less

Communication strategies to optimize commitments and investments in iron programming.

PubMed

Griffiths, Marcia

2002-04-01

There is consensus that a communications component is crucial to the success of iron supplementation and fortification programs. However, in many instances, we have not applied what we know about successful advocacy and program communications to iron programs. Communication must play a larger and more central role in iron programs to overcome several common shortcomings and allow the use of new commitments and investments in iron programming to optimum advantage. One shortcoming is that iron program communication has been driven primarily by the supply side of the supply-demand continuum. That is, technical information has been given without thought for what people want to know or do. To overcome this, the communication component, which should be responsive to the consumer perspective, must be considered at program inception, not enlisted late in the program cycle as a remedy when interventions fail to reach their targets. Another shortcoming is the lack of program focus on behavior. Because the "technology" of iron, a supplement, or fortified or specific local food must be combined with appropriate consumer behavior, it is not enough to promote the technology. The appropriate use of technology must be ensured, and this requires precise and strategically crafted communications. A small number of projects from countries as diverse as Indonesia, Egypt, Nicaragua and Peru offer examples of successful communications efforts and strategies for adaptation by other countries.

Empowering Children with Adaptive Technology Skills: Careful Engagement in the Digital Information Age

ERIC Educational Resources Information Center

Huda, Miftachul; Jasmi, Kamarul Azmi; Mustari, Mohd Ismail; Basiron, Bushrah; Hehsan, Aminudin; Shahrill, Masitah; Gassama, Saikou Kawsu

2017-01-01

The technological advancement occurring in the world today has a potency to create positive and negative side effects especially on children. The positive side may entail increased empathy and acceptance of diversity through modelling the prosocial behaviours, while the negative can be manifest in aggressive behaviour, risky sexual behaviour, and…

Immigration and earnings inequality in America's new small-town destinations.

PubMed

Hyde, Allen; Pais, Jeremy; Wallace, Michael

2015-01-01

Research on the relationship between immigrant population concentration and earnings inequality is divided between two perspectives. Supply-side arguments maintain that areas attracting large numbers of immigrants experience minimal wage growth at the bottom of the earnings distribution, which increases local levels of earnings inequality. Demand-side arguments contend that industrial restructuring reduces the pay of manual labor regardless of, and even prior to, the arrival of foreign-born workers. Adjudicating between these two perspectives is hindered by issues of potential endogeneity, which confound attempts to independently assess the effects of immigration on inequality or vice versa using OLS regression. We consider a third perspective called the reciprocal effects hypothesis which contends that immigrant concentration and earnings inequality emerge together through a mutually reinforcing feedback process. We explore this question in America's "new small-town destinations" using data from U.S. micropolitan statistical areas. We use three-stage least squares estimation to address the endogeneity problem and to test these three hypotheses. While we find support for both the supply- and demand-side perspectives, the results are best explained by the reciprocal effects hypothesis. Copyright © 2014 Elsevier Inc. All rights reserved.

Effects of Rural Mutual Health Care on outpatient service utilization in Chinese village medical institutions: evidence from panel data.

PubMed

Zhou, Zhongliang; Gao, Jianmin; Xue, Qinxiang; Yang, Xiaowei; Yan, Ju'e

2009-07-01

To solve the problem of 'Kan bing nan, kan bing gui' (medical treatment is difficult to access and expensive), a Harvard-led research team implemented a community-based health insurance scheme known as Rural Mutual Health Care (RMHC) in Chinese rural areas from 2004 to 2006. Two major policies adopted by RMHC included insurance coverage of outpatient services (demand-side policy) and drug policy (supply-side policy). This paper focuses on the effects of these two policies on outpatient service utilization in Chinese village clinics. The data used in this study are from 3-year household follow-up surveys. A generalized negative binomial regression model and a Heckman selection model were constructed using panel data from 2005 to 2007. The results indicate that the price elasticities of demand for outpatient visits and per-visit outpatient expenses were -1.5 and -0.553, respectively. After implementing the supply-side policy, outpatient visits and per-visit outpatient expenses decreased by 94.7 and 55.9%, respectively, controlling for insurance coverage. These findings can be used to make recommendations to the Chinese government on improving the health care system.

Energy Technology Allocation for Distributed Energy Resources: A Technology-Policy Framework

NASA Astrophysics Data System (ADS)

Mallikarjun, Sreekanth

Distributed energy resources (DER) are emerging rapidly. New engineering technologies, materials, and designs improve the performance and extend the range of locations for DER. In contrast, constructing new or modernizing existing high voltage transmission lines for centralized generation are expensive and challenging. In addition, customer demand for reliability has increased and concerns about climate change have created a pull for swift renewable energy penetration. In this context, DER policy makers, developers, and users are interested in determining which energy technologies to use to accommodate different end-use energy demands. We present a two-stage multi-objective strategic technology-policy framework for determining the optimal energy technology allocation for DER. The framework simultaneously considers economic, technical, and environmental objectives. The first stage utilizes a Data Envelopment Analysis model for each end-use to evaluate the performance of each energy technology based on the three objectives. The second stage incorporates factor efficiencies determined in the first stage, capacity limitations, dispatchability, and renewable penetration for each technology, and demand for each end-use into a bottleneck multi-criteria decision model which provides the Pareto-optimal energy resource allocation. We conduct several case studies to understand the roles of various distributed energy technologies in different scenarios. We construct some policy implications based on the model results of set of case studies.

The Effects of a Technology-Aided Learning Environment on the Improvement of a Primary Special Education School

ERIC Educational Resources Information Center

Karal, Hasan

2015-01-01

The changes demanded by technology are reshaping people's expectations of education. These changing demands and expectations have introduced certain concepts, such as individuals who have become skilled at learning and the learning organization. Individuals and schools, as the most basic unit of educational organizations, should demonstrate a…

Educational Modelling Language: Modelling Reusable, Interoperable, Rich and Personalised Units of Learning

ERIC Educational Resources Information Center

Koper, Rob; Manderveld, Jocelyn

2004-01-01

Nowadays there is a huge demand for flexible, independent learning without the constraints of time and place. Various trends in the field of education and training are the bases for the development of new technologies for education. This article describes the development of a learning technology specification, which supports these new demands for…

Developing Health Information Technology (HIT) Programs and HIT Curriculum: The Southern Polytechnic State University Experience

ERIC Educational Resources Information Center

Zhang, Chi; Reichgelt, Han; Rutherfoord, Rebecca H.; Wang, Andy Ju An

2014-01-01

Health Information Technology (HIT) professionals are in increasing demand as healthcare providers need help in the adoption and meaningful use of Electronic Health Record (EHR) systems while the HIT industry needs workforce skilled in HIT and EHR development. To respond to this increasing demand, the School of Computing and Software Engineering…

Informal Learning with Technology: The Effects of Self-Constructing Externalizations

ERIC Educational Resources Information Center

Damnik, Gregor; Proske, Antje; Narciss, Susanne; Körndle, Hermann

2013-01-01

Especially in the context of technology-enhanced informal learning, it is crucial to understand how to design information sources in such a way that learners are not overwhelmed by the demands of the learning process, but at the same time are engaged in higher order thinking processes. Guidance aids learners in dealing with the demands of a…

Exploring Hydrogen Fuel Cell Technology

ERIC Educational Resources Information Center

Brus, David; Hotek, Doug

2010-01-01

One of the most significant technological issues of the 21st Century is finding a way to fulfill the energy demands without destroying the environment through global warming and climate change. Worldwide human population is on the rise, and with it, the demand for more energy in pursuit of a higher quality of life. In the meantime, as people use…

An Interdisciplinary Approach to Developing Renewable Energy Mixes at the Community Scale

NASA Astrophysics Data System (ADS)

Gormally, Alexandra M.; Whyatt, James D.; Timmis, Roger J.; Pooley, Colin G.

2013-04-01

Renewable energy has risen on the global political agenda due to concerns over climate change and energy security. The European Union (EU) currently has a target of 20% renewable energy by the year 2020 and there is increasing focus on the ways in which these targets can be achieved. Here we focus on the UK context which could be considered to be lagging behind other EU countries in terms of targets and implementation. The UK has a lower overall target of 15% renewable energy by 2020 and in 2011 reached only 3.8 % (DUKES, 2012), one of the lowest progressions compared to other EU Member States (European Commission, 2012). The reticence of the UK to reach such targets could in part be due to their dependence on their current energy mix and a highly centralised electricity grid system, which does not lend itself easily to the adoption of renewable technologies. Additionally, increasing levels of demand and the need to raise energy awareness are key concerns in terms of achieving energy security in the UK. There is also growing concern from the public about increasing fuel and energy bills. One possible solution to some of these problems could be through the adoption of small-scale distributed renewable schemes implemented at the community-scale with local ownership or involvement, for example, through energy co-operatives. The notion of the energy co-operative is well understood elsewhere in Europe but unfamiliar to many UK residents due to its centralised approach to energy provision. There are many benefits associated with engaging in distributed renewable energy systems. In addition to financial benefits, participation may raise energy awareness and can lead to positive responses towards renewable technologies. Here we briefly explore how a mix of small-scale renewables, including wind, hydro-power and solar PV, have been implemented and managed by a small island community in the Scottish Hebrides to achieve over 90% of their electricity needs from renewable resources (Yadoo et al., 2011), before considering how similar mixes could be developed for rural on-grid communities in the mainland UK. We adopt an interdisciplinary approach that combines quantitative methods (spatial analysis and calculated energy outputs) with secondary data sources to assess resource potential at the regional scale (resolution 1km2) to highlight areas with significant local resources for a mix of renewable energy technologies (Gormally et al., 2012). We then focus at the community-level and use a combination of primary qualitative data (questionnaires and interviews on community acceptance to technologies) and primary quantitative data (primary resource data to assess how renewable mixes may vary throughout the year eg. hourly, daily, monthly) to produce a portfolio of energy scenarios. The scenarios assess different 'supply side' options, including different scales and mixes of technology, 'demand side' options including business as usual and reduced demand, and resilience to change, for example extreme events (droughts, floods). Here we present a methodology and outputs for a case study community in the UK but will highlight how the approach may be adopted for use in other communities across Europe. DUKES (2012) Digest of UK Energy Statistics. Accessed:07/01/2013 European Commission (2012) EUROPE 2020 TARGETS: climate change and energy. Accessed:07/01/2013 Gormally, A. M., Whyatt, J. D., Timmis, R. J. & Pooley, C. G. (2012) A regional-scale assessment of local renewable energy resources in Cumbria, UK. Energy Policy, 50, 283-293. Yadoo, A., Gormally, A. & Cruickshank, H. (2011) Low-carbon off-grid electrification for rural areas in the United Kingdom: Lessons from the developing world. Energy Policy, 39, 6400-6407.

A novel microgrid demand-side management system for manufacturing facilities

NASA Astrophysics Data System (ADS)

Harper, Terance J.

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid and DSM program was enabled together, resulting in a total reduction of 37%. On average, peak demand was reduced by 6%, but due to the intermittency of the renewable source and the billing structure for peak demand, only a 1% reduction was obtained. During a billing period, it only takes one day when solar irradiance is poor to affect the demand reduction capabilities. To achieve further demand reduction, energy storage should be introduced and integrated.

An Integrated Hydrologic-Economic Modeling Tool for Evaluating Water Management Responses to Climate Change in the Boise River Basin

NASA Astrophysics Data System (ADS)

Schmidt, R. D.; Taylor, R. G.; Stodick, L. D.; Contor, B. A.

2009-12-01

A recent federal interagency report on climate change and water management (Brekke et. al., 2009) describes several possible management responses to the impacts of climate change on water supply and demand. Management alternatives include changes to water supply infrastructure, reservoir system operations, and water demand policies. Water users in the Bureau of Reclamation’s Boise Project (located in the Lower Boise River basin in southwestern Idaho) would be among those impacted both hydrologically and economically by climate change. Climate change and management responses to climate change are expected to cause shifts in water supply and demand. Supply shifts would result from changes in basin precipitation patterns, and demand shifts would result from higher evapotranspiration rates and a longer growing season. The impacts would also extend to non-Project water users in the basin, since most non-Project groundwater pumpers and drain water diverters rely on hydrologic externalities created by seepage losses from Boise Project water deliveries. An integrated hydrologic-economic model was developed for the Boise basin to aid Reclamation in evaluating the hydrologic and economic impacts of various management responses to climate change. A spatial, partial-equilibrium, economic optimization model calculates spatially-distinct equilibrium water prices and quantities, and maximizes a social welfare function (the sum of consumer and producers surpluses) for all agricultural and municipal water suppliers and demanders (both Project and non-Project) in the basin. Supply-price functions and demand-price functions are exogenous inputs to the economic optimization model. On the supply side, groundwater and river/reservoir models are used to generate hydrologic responses to various management alternatives. The response data is then used to develop water supply-price functions for Project and non-Project water users. On the demand side, crop production functions incorporating crop distribution, evapotranspiration rates, irrigation efficiencies, and crop prices are used to develop water demand-price functions for agricultural water users. Demand functions for municipal and industrial water users are also developed. Recent applications of the integrated model have focused on the hydrologic and economic impacts of demand management alternatives, including large-scale canal lining conservation measures, and market-based water trading between canal diverters and groundwater pumpers. A supply management alternative being investigated involves revising reservoir rule curves to compensate for climate change impacts on timing of reservoir filling.

A generic hydroeconomic model to assess future water scarcity

NASA Astrophysics Data System (ADS)

Neverre, Noémie; Dumas, Patrice

2015-04-01

We developed a generic hydroeconomic model able to confront future water supply and demand on a large scale, taking into account man-made reservoirs. The assessment is done at the scale of river basins, using only globally available data; the methodology can thus be generalized. On the supply side, we evaluate the impacts of climate change on water resources. The available quantity of water at each site is computed using the following information: runoff is taken from the outputs of CNRM climate model (Dubois et al., 2010), reservoirs are located using Aquastat, and the sub-basin flow-accumulation area of each reservoir is determined based on a Digital Elevation Model (HYDRO1k). On the demand side, agricultural and domestic demands are projected in terms of both quantity and economic value. For the agricultural sector, globally available data on irrigated areas and crops are combined in order to determine irrigated crops localization. Then, crops irrigation requirements are computed for the different stages of the growing season using Allen (1998) method with Hargreaves potential evapotranspiration. Irrigation water economic value is based on a yield comparison approach between rainfed and irrigated crops. Potential irrigated and rainfed yields are taken from LPJmL (Blondeau et al., 2007), or from FAOSTAT by making simple assumptions on yield ratios. For the domestic sector, we project the combined effects of demographic growth, economic development and water cost evolution on future demands. The method consists in building three-blocks inverse demand functions where volume limits of the blocks evolve with the level of GDP per capita. The value of water along the demand curve is determined from price-elasticity, price and demand data from the literature, using the point-expansion method, and from water costs data. Then projected demands are confronted to future water availability. Operating rules of the reservoirs and water allocation between demands are based on the maximization of water benefits, over time and space. A parameterisation-simulation-optimisation approach is used. This gives a projection of future water scarcity in the different locations and an estimation of the associated direct economic losses from unsatisfied demands. This generic hydroeconomic model can be easily applied to large-scale regions, in particular developing regions where little reliable data is available. We will present an application to Algeria, up to the 2050 horizon.

Agility in adversity: Vaccines on Demand.

PubMed

De Groot, Anne S; Moise, Leonard; Olive, David; Einck, Leo; Martin, William

2016-09-01

Is the US ready for a biological attack using Ebola virus or Anthrax? Will vaccine developers be able to produce a Zika virus vaccine, before the epidemic spreads around the world? A recent report by The Blue Ribbon Study Panel on Biodefense argues that the US is not ready for these challenges, however, technologies and capabilities that could address these deficiencies are within reach. Vaccine technologies have advanced and readiness has improved in recent years, due to advances in sequencing technology and computational power making the 'vaccines on demand' concept a reality. Building a robust strategy to design effective biodefense vaccines from genome sequences harvested by real-time biosurveillance will benefit from technologies that are being brought to bear on the cancer cure 'moonshot'. When combined with flexible vaccine production platforms, vaccines on demand will relegate expensive and, in some cases, insufficiently effective vaccine stockpiles to the dust heap of history.

Regional comparisons of on-site solar potential in the residential and industrial sectors

NASA Astrophysics Data System (ADS)

Gatzke, A. E.; Skewes-Cox, A. O.

1980-10-01

Regional and subregional differences in the potential development of decentralized solar technologies are studied. Two sectors of the economy were selected for intensive analysis: the residential and industrial sectors. The sequence of analysis follows the same general steps: (1) selection of appropriate prototypes within each land use sector disaggregated by census region; (2) characterization of the end-use energy demand of each prototype in order to match an appropriate decentralized solar technology to the energy demand; (3) assessment of the energy conservation potential within each prototype limited by land use patterns, technology efficiency, and variation in solar insolation; and (4) evaluation of the regional and subregional differences in the land use implications of decentralized energy supply technologies that result from the combination of energy demand, energy supply potential, and the subsequent addition of increasingly more restrictive policies to increase the percent contribution of on-site solar energy.

77 FR 48492 - Event Data Recorders

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... that [cir] Involve side or side curtain/tube air bags such that EDR data would only need to be locked... deployable restraints other than frontal, side or side/curtain air bags such that EDR data would not need to.... The final rule was intended to be technology-neutral, so as to permit compliance with any available...

Scenarios for Demand Growth of Metals in Electricity Generation Technologies, Cars, and Electronic Appliances

PubMed Central

2018-01-01

This study provides scenarios toward 2050 for the demand of five metals in electricity production, cars, and electronic appliances. The metals considered are copper, tantalum, neodymium, cobalt, and lithium. The study shows how highly technology-specific data on products and material flows can be used in integrated assessment models to assess global resource and metal demand. We use the Shared Socio-economic Pathways as implemented by the IMAGE integrated assessment model as a starting point. This allows us to translate information on the use of electronic appliances, cars, and renewable energy technologies into quantitative data on metal flows, through application of metal content estimates in combination with a dynamic stock model. Results show that total demand for copper, neodymium, and tantalum might increase by a factor of roughly 2 to 3.2, mostly as a result of population and GDP growth. The demand for lithium and cobalt is expected to increase much more, by a factor 10 to more than 20, as a result of future (hybrid) electric car purchases. This means that not just demographics, but also climate policies can strongly increase metal demand. This shows the importance of studying the issues of climate change and resource depletion together, in one modeling framework. PMID:29533657

Scenarios for Demand Growth of Metals in Electricity Generation Technologies, Cars, and Electronic Appliances.

PubMed

Deetman, Sebastiaan; Pauliuk, Stefan; van Vuuren, Detlef P; van der Voet, Ester; Tukker, Arnold

2018-04-17

This study provides scenarios toward 2050 for the demand of five metals in electricity production, cars, and electronic appliances. The metals considered are copper, tantalum, neodymium, cobalt, and lithium. The study shows how highly technology-specific data on products and material flows can be used in integrated assessment models to assess global resource and metal demand. We use the Shared Socio-economic Pathways as implemented by the IMAGE integrated assessment model as a starting point. This allows us to translate information on the use of electronic appliances, cars, and renewable energy technologies into quantitative data on metal flows, through application of metal content estimates in combination with a dynamic stock model. Results show that total demand for copper, neodymium, and tantalum might increase by a factor of roughly 2 to 3.2, mostly as a result of population and GDP growth. The demand for lithium and cobalt is expected to increase much more, by a factor 10 to more than 20, as a result of future (hybrid) electric car purchases. This means that not just demographics, but also climate policies can strongly increase metal demand. This shows the importance of studying the issues of climate change and resource depletion together, in one modeling framework.

Methodology for the comparative assessment of the Satellite Power System (SPS) and alternative technologies

NASA Technical Reports Server (NTRS)

Wolsko, T.; Buehring, W.; Cirillo, R.; Gasper, J.; Habegger, L.; Hub, K.; Newsom, D.; Samsa, M.; Stenehjem, E.; Whitfield, R.

1980-01-01

The energy systems concerned are the satellite power system, several coal technologies, geothermal energy, fission, fusion, terrestrial solar systems, and ocean thermal energy conversion. Guidelines are suggested for the characterization of these systems, side-by-side analysis, alternative futures analysis, and integration and aggregation of data. A description of the methods for assessing the technical, economic, environmental, societal, and institutional issues surrounding the development of the selected energy technologies is presented.

Towards smart environments using smart objects.

PubMed

Sedlmayr, Martin; Prokosch, Hans-Ulrich; Münch, Ulli

2011-01-01

Barcodes, RFID, WLAN, Bluetooth and many more technologies are used in hospitals. They are the technological bases for different applications such as patient monitoring, asset management and facility management. However, most of these applications exist side by side with hardly any integration and even interoperability is not guaranteed. Introducing the concept of smart objects inspired by the Internet of Things can improve the situation by separating the capabilities and functions of an object from the implementing technology such as RFID or WLAN. By aligning technological and business developments smart objects have the power to transform a hospital from an agglomeration of technologies into a smart environment.

Incremental cost of increasing access to maternal health care services: perspectives from a demand and supply side intervention in Eastern Uganda.

PubMed

Mayora, Chrispus; Ekirapa-Kiracho, Elizabeth; Bishai, David; Peters, David H; Okui, Olico; Baine, Sebastian Olikira

2014-01-01

High maternal and infant mortality continue to be major challenges to the attainment of the Millennium Development Goals for many low and middle-income countries. There is now evidence that voucher initiatives can increase access to maternal health services. However, a dearth of knowledge exists on the cost implications of voucher schemes. This paper estimates the incremental costs of a demand and supply side intervention aimed at increasing access to maternal health care services. This costing study was part of a quasi-experimental voucher study conducted in two districts in Eastern Uganda to explore the impact of demand and supply - side incentives on increasing access to maternal health services. The provider's perspective was used and the ingredients approach to costing was employed. Costs were based on market prices as recorded in program records. Total, unit, and incremental costs were calculated. The estimated total financial cost of the intervention for the one year of implementation was US$525,472 (US$1 = 2200UgShs). The major cost drivers included costs for transport vouchers (35.3%), health system strengthening (29.2%) and vouchers for maternal health services (18.2%). The average cost of transport per woman to and from the health facility was US$4.6. The total incremental costs incurred on deliveries (excluding caesarean section) was US$317,157 and US$107,890 for post natal care (PNC). The incremental costs per additional delivery and PNC attendance were US$23.9 and US$7.6 respectively. Subsidizing maternal health care costs through demand and supply - side initiatives may not require significant amounts of resources contrary to what would be expected. With Uganda's Gross Domestic Product (GDP) per capita of US$55` (2012), the incremental cost per additional delivery (US$23.9) represents about 5% of GDP per capita to save a mother and probably her new born. For many low income countries, this may not be affordable, yet reliance on donor funding is often not sustainable. Alternative ways of raising additional resources for health must be explored. These include; encouraging private investments in critical sectors such as rural transport, health service provision; mobilizing households to save financial resources for preparedness, and financial targeting for the most vulnerable.

Robust Unit Commitment Considering Uncertain Demand Response

DOE PAGES

Liu, Guodong; Tomsovic, Kevin

2014-09-28

Although price responsive demand response has been widely accepted as playing an important role in the reliable and economic operation of power system, the real response from demand side can be highly uncertain due to limited understanding of consumers' response to pricing signals. To model the behavior of consumers, the price elasticity of demand has been explored and utilized in both research and real practice. However, the price elasticity of demand is not precisely known and may vary greatly with operating conditions and types of customers. To accommodate the uncertainty of demand response, alternative unit commitment methods robust to themore » uncertainty of the demand response require investigation. In this paper, a robust unit commitment model to minimize the generalized social cost is proposed for the optimal unit commitment decision taking into account uncertainty of the price elasticity of demand. By optimizing the worst case under proper robust level, the unit commitment solution of the proposed model is robust against all possible realizations of the modeled uncertain demand response. Numerical simulations on the IEEE Reliability Test System show the e ectiveness of the method. Finally, compared to unit commitment with deterministic price elasticity of demand, the proposed robust model can reduce the average Locational Marginal Prices (LMPs) as well as the price volatility.« less

Estimated metabolic and mechanical demands during different small-sided games in elite soccer players.

PubMed

Gaudino, Paolo; Alberti, Giampietro; Iaia, F Marcello

2014-08-01

The present study examined the extent to which game format (possession play, SSG-P and game with regular goals and goalkeepers, SSG-G) and the number of players (5, 7 and 10 a-side) influence the physical demands of small-sided soccer games (SSGs) in elite soccer players. Training data were collected during the in-season period from 26 English Premier League outfield players using global positioning system technology. Total distance covered, distance at different speed categories and maximal speed were calculated. In addition, we focused on changes in velocity by reporting the number of accelerations and decelerations carried out during the SSGs (divided in two categories: moderate and high) and the absolute maximal values of acceleration and deceleration achieved. By taking into account these parameters besides speed and distance values, estimated energy expenditure and average metabolic power and distance covered at different metabolic power categories were calculated. All variables were normalized by time (i.e., 4min). The main findings were that the total distance, distances run at high speed (>14.4kmh(-1)) as well as absolute maximum velocity, maximum acceleration and maximum deceleration increased with pitch size (10v10>7v7>5v5; p<.05). Furthermore, total distance, very high (19.8-25.2kmh(-1)) and maximal (>25.2kmh(-1)) speed distances, absolute maximal velocity and maximum acceleration and deceleration were higher in SSG-G than in SSG-P (p<.001). On the other hand, the number of moderate (2-3ms(-2)) accelerations and decelerations as well as the total number of changes in velocity were greater as the pitch dimensions decreased (i.e., 5v5>7v7>10v10; p<.001) in both SSG-G and SSG-P. In addition, predicted energy cost, average metabolic power and distance covered at every metabolic power categories were higher in SSG-P compared to SSG-G and in big than in small pitch areas (p<.05). A detailed analysis of these drills is pivotal in contemporary football as it enables an in depth understanding of the workload imposed on each player which consequently has practical implications for the prescription of the adequate type and amount of stimulus during exercise training. Copyright © 2014 Elsevier B.V. All rights reserved.

Time Savers: Make Sure Time Is on Your Side with These Practices

ERIC Educational Resources Information Center

Burrall, Bill

2006-01-01

Time is the proverbial black hole that educators must constantly manage as they juggle multiple jobs in a typical workday. Whether it be managing staff, dealing with parents and community, or implementing new technologies, time is usually not on our side. Although technology cannot solve all problems, it can assist educators on all fronts in…

Characterization of polymorphic states in energetic samples of 1,3,5-trinitro-1,3,5-triazine (RDX) fabricated using drop-on-demand inkjet technology.

PubMed

Emmons, Erik D; Farrell, Mikella E; Holthoff, Ellen L; Tripathi, Ashish; Green, Norman; Moon, Raphael P; Guicheteau, Jason A; Christesen, Steven D; Pellegrino, Paul M; Fountain, Augustus W

2012-06-01

The United States Army and the first responder community are evaluating optical detection systems for the trace detection of hazardous energetic materials. Fielded detection systems must be evaluated with the appropriate material concentrations to accurately identify the residue in theater. Trace levels of energetic materials have been observed in mutable polymorphic phases and, therefore, the systems being evaluated must be able to detect and accurately identify variant sample phases observed in spectral data. In this work, we report on the novel application of drop-on-demand technology for the fabrication of standardized trace 1,3,5-trinitro-1,3,5-triazine (RDX) samples. The drop-on-demand sample fabrication technique is compared both visually and spectrally to the more commonly used drop-and-dry technique. As the drop-on-demand technique allows for the fabrication of trace level hazard materials, concerted efforts focused on characterization of the polymorphic phase changes observed with low concentrations of RDX commonly used in drop-on-demand processing. This information is important when evaluating optical detection technologies using samples prepared with a drop-on-demand inkjet system, as the technology may be "trained" to detect the common bulk α phase of the explosive based on its spectral features but fall short in positively detecting a trace quantity of RDX (β-phase). We report the polymorphic shifts observed between α- and β-phases of this energetic material and discuss the conditions leading to the favoring of one phase over the other.

Challenges to decision-making processes in the national HTA agency in Brazil: operational procedures, evidence use and recommendations.

PubMed

Yuba, Tania Yuka; Novaes, Hillegonda Maria Dutilh; de Soárez, Patrícia Coelho

2018-05-11

The quality of the evidence used in health technology assessment (HTA) agency reports has been considered essential for decision-making processes and their legitimacy. In Brazil, CONITEC is the agency responsible for defining data mandatory for the submission of proposals for the incorporation of new technologies. The objective of this study was to analyse CONITEC recommendation reports, the type of scientific evidence used in them and their compliance with operational procedures. This is a descriptive study based on CONITEC official reports from July 2012 through December 2016. Data were collected with a specific extraction form and analysed using descriptive statistics. We evaluated 199 CONITEC recommendation reports. The annual number of reports increased during the study period. The absolute annual number of new technologies incorporated in 2013 (n = 24) was similar to that observed for 2014 (n = 24) and 2015 (n = 22), decreasing in 2016 (n = 13). The type of technology most frequently evaluated was 'drugs' (68.3%), followed by 'procedures' (20.1%). Overall, 117 (58.8%) reports were internal demands, 75 (37.7%) were external demands and 7 (3.5%) were mixed demands. There were differences between internal and external demands in terms of the evidence used in the reports and the decision regarding the recommendation to incorporate the technologies. Among the internal demands, the recommendation to incorporate the new technology was made for 70.9% of the reports, only 9.6% of which included full HTAs. Among the external demands, the incorporation of the new technology was recommended for 17.3% of the reports, 76.9% of which included full HTAs. Of the 101 reports in which incorporation of the new technology was recommended, 88 (87.1%) did not include a full health economic evaluation and ICER calculation. There are compliance difficulties with the recommendations in the CONITEC internal regulations regarding the type and quality of evidence considered in the analysis of recommendation reports. The characteristics of the evidence used in recommendation reports and those considered to be mandatory were very different, indicating problems in decision-making processes. There is a need to study, with a broader perspective, the factors that influence the type of evidence used in decision-making processes in order to contribute to the development of better practices and policies.

USGS Map-on-Demand Printing

USGS Publications Warehouse

,

1999-01-01

Currently, the U.S. Geological Survey (USGS) uses conventional lithographic printing techniques to produce paper copies of most of its mapping products. This practice is not economical for those products that are in low demand. With the advent of newer technologies, high-speed, large-format printers have been coupled with innovative computer software to turn digital map data into a printed map. It is now possible to store and retrieve data from vast geospatial data bases and print a map on an as-needed basis; that is, print on demand, thereby eliminating the need to warehouse an inventory of paper maps for which there is low demand. Using print-on-demand technology, the USGS is implementing map-on-demand (MOD) printing for certain infrequently requested maps. By providing MOD, the USGS can offer an alternative to traditional, large-volume printing and can improve its responsiveness to customers by giving them greater access to USGS scientific data in a format that otherwise might not be available.

From Informational Technology in Biology Teaching to Inspirational Technology: Where Have We Come from and Where Are We Going?

ERIC Educational Resources Information Center

Peat, Mary; Taylor, Charlotte; Fernandez, Anne

Today university students are demanding a greater say in their tertiary education. In particular they are demanding a greater flexibility in the way they receive their instruction, and it is imperative that course delivery strategies that fulfil these expectations are investigated. On-line delivery of learning materials offers teacher and students…

A Case Study of How a Sample of Preservice Teachers Made Sense of Incorporating iPads into Their Instruction with Children

ERIC Educational Resources Information Center

Brown, Christopher P.; Englehardt, Joanna

2017-01-01

The increased use of and demand for technology in early childhood education classrooms and programs creates new challenges for practicing and preservice early educators being asked to employ such technology within their teaching. Early childhood teacher education programs have struggled to meet these demands for teaching their students how to…

The Living Textbook: A Demonstration of Information on Demand Technologies in Education.

ERIC Educational Resources Information Center

Mills, Kim; And Others

A growing concern is that our nation is failing to provide a technology infrastructure for K-12 education that will enable graduates to compete in the information-based economy of the 21st century. The Living Textbook project is designed to deliver real-time, multimedia information on demand for use in classroom instruction. Three pilot schools in…

Methodological approaches of health technology assessment.

PubMed

Goodman, C S; Ahn, R

1999-12-01

In this era of evolving health care systems throughout the world, technology remains the substance of health care. Medical informatics comprises a growing contribution to the technologies used in the delivery and management of health care. Diverse, evolving technologies include artificial neural networks, computer-assisted surgery, computer-based patient records, hospital information systems, and more. Decision-makers increasingly demand well-founded information to determine whether or how to develop these technologies, allow them on the market, acquire them, use them, pay for their use, and more. The development and wider use of health technology assessment (HTA) reflects this demand. While HTA offers systematic, well-founded approaches for determining the value of medical informatics technologies, HTA must continue to adapt and refine its methods in response to these evolving technologies. This paper provides a basic overview of HTA principles and methods.

Separating Myth from Reality.

ERIC Educational Resources Information Center

Gluckman, Ivan B.

1985-01-01

Civil libertarians and members of more conservative special interest groups have equally legitimate concerns for the educational needs of students attending public schools. The goals and desires of concerned citizens from both sides can be met if neither makes unreasonable demands upon each other. (MD)

Information Professionals in the Digital Age.

ERIC Educational Resources Information Center

Cronin, Blaise

1998-01-01

Describes the strategic significance of information and intelligence management to socioeconomic growth. Considers implications in terms of human and structural intellectual capital development. Provides demand- and supply-side analyses of the knowledge and skills required of information professionals in the digital age. (Author)

Immediate drop on demand technology (I-DOT) coupled with mass spectrometry via an open port sampling interface.

PubMed

Van Berkel, Gary J; Kertesz, Vilmos; Boeltz, Harry

2017-11-01

The aim of this work was to demonstrate and evaluate the analytical performance of coupling the immediate drop on demand technology to a mass spectrometer via the recently introduced open port sampling interface and ESI. Methodology & results: A maximum sample analysis throughput of 5 s per sample was demonstrated. Signal reproducibility was 10% or better as demonstrated by the quantitative analysis of propranolol and its stable isotope-labeled internal standard propranolol-d7. The ability of the system to multiply charge and analyze macromolecules was demonstrated using the protein cytochrome c. This immediate drop on demand technology/open port sampling interface/ESI-MS combination allowed for the quantitative analysis of relatively small mass analytes and was used for the identification of macromolecules like proteins.

Automated Dynamic Demand Response Implementation on a Micro-grid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuppannagari, Sanmukh R.; Kannan, Rajgopal; Chelmis, Charalampos

In this paper, we describe a system for real-time automated Dynamic and Sustainable Demand Response with sparse data consumption prediction implemented on the University of Southern California campus microgrid. Supply side approaches to resolving energy supply-load imbalance do not work at high levels of renewable energy penetration. Dynamic Demand Response (D 2R) is a widely used demand-side technique to dynamically adjust electricity consumption during peak load periods. Our D 2R system consists of accurate machine learning based energy consumption forecasting models that work with sparse data coupled with fast and sustainable load curtailment optimization algorithms that provide the ability tomore » dynamically adapt to changing supply-load imbalances in near real-time. Our Sustainable DR (SDR) algorithms attempt to distribute customer curtailment evenly across sub-intervals during a DR event and avoid expensive demand peaks during a few sub-intervals. It also ensures that each customer is penalized fairly in order to achieve the targeted curtailment. We develop near linear-time constant-factor approximation algorithms along with Polynomial Time Approximation Schemes (PTAS) for SDR curtailment that minimizes the curtailment error defined as the difference between the target and achieved curtailment values. Our SDR curtailment problem is formulated as an Integer Linear Program that optimally matches customers to curtailment strategies during a DR event while also explicitly accounting for customer strategy switching overhead as a constraint. We demonstrate the results of our D 2R system using real data from experiments performed on the USC smartgrid and show that 1) our prediction algorithms can very accurately predict energy consumption even with noisy or missing data and 2) our curtailment algorithms deliver DR with extremely low curtailment errors in the 0.01-0.05 kWh range.« less

Supply and demand: How does variation in atmospheric oxygen during development affect insect tracheal and mitochondrial networks?

PubMed

VandenBrooks, John M; Gstrein, Gregory; Harmon, Jason; Friedman, Jessica; Olsen, Matthew; Ward, Anna; Parker, Gregory

2018-04-01

Atmospheric oxygen is one of the most important atmospheric component for all terrestrial organisms. Variation in atmospheric oxygen has wide ranging effects on animal physiology, development, and evolution. This variation in oxygen has the potential to affect both respiratory systems (the supply side) and mitochondrial networks (the demand side) in animals. Insect respiratory systems supplying oxygen to tissues in the gas phase through blind ended tracheal systems are particularly susceptible to this variation. While the large conducting tracheae have previously been shown to respond developmentally to changes in rearing oxygen, the effect of oxygen on the tracheolar network has been relatively unexplored, especially in adult insects. Similarly, mitochondrial networks that meet energy demand in insects and other animals are dynamic and their enzyme activities have been shown to vary in the presence of oxygen. These two systems together should be under selective pressure to meet the aerobic metabolic requirements of insects. To test this hypothesis, we reared Mito-YFP Drosophila under three different oxygen concentrations hypoxia (12%), normoxia (21%), and hyperoxia (31%) and imaged their tracheolar and mitochondrial networks within their flight muscle using confocal microscopy. In terms of oxygen supply, hypoxia increased mean (mid-length) tracheolar diameters, tracheolar tip diameters, the number of tracheoles per main branch and affected tracheal branching patterns, while the opposite was observed in hyperoxia. In terms of oxygen demand, hypoxia increased mitochondrial investment and mitochondrial to tracheolar volume ratios; while the opposite was observed in hyperoxia. Generally, hypoxia had a stronger effect on both systems than hyperoxia. These results show that insects are capable of developmentally changing investment in both their supply and demand networks to increase overall fitness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hydrogen tomorrow: Demands and technology requirements

NASA Technical Reports Server (NTRS)

1975-01-01

National needs for hydrogen are projected and the technologies of production, handling, and utilization are evaluated. Research and technology activities required to meet the projected needs are determined.

10 CFR 609.15 - Default, demand, payment, and collateral liquidation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Default, demand, payment, and collateral liquidation. 609.15 Section 609.15 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS LOAN GUARANTEES FOR PROJECTS THAT EMPLOY INNOVATIVE TECHNOLOGIES § 609.15 Default, demand, payment, and collateral liquidation...

Effect of fare and travel time on the demand for domestic air transportation

NASA Technical Reports Server (NTRS)

Eriksen, S. E.; Liu, E. W.

1979-01-01

An econometric travel demand model was presented. The model was used for analyzing long haul domestic passenger markets in the United States. The results showed the sensitivities of demand to changes in fares and speed reflecting technology through more efficient aircraft designs.

10 CFR 611.111 - Default, demand, payment, and collateral liquidation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Default, demand, payment, and collateral liquidation. 611.111 Section 611.111 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Direct Loan Program § 611.111 Default, demand, payment, and...

The Portuguese generic medicines market: a policy analysis

PubMed Central

Simoens, Steven

2008-01-01

Objectives: This study aims to conduct a descriptive analysis of the policy environment surrounding the generic medicines retail market in Portugal. The policy analysis focuses on supply-side measures (i.e. market access, pricing, reference-pricing and reimbursement of generic medicines) and demand-side measures (i.e. incentives for physicians to prescribe, for pharmacists to dispense and for patients to use generic medicines). Methods: The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Portugal using IMS Health data. Results: Portugal has developed a successful generic medicines market by increasing reimbursement of generic medicines (until October 2005), by introducing a reference-pricing system, by encouraging physicians to prescribe by international non-proprietary name (INN), and by allowing generic substitution by pharmacists. However, the development of the generic medicines market has been hindered by the existence of copies, pricing regulation, certain features of the reference-pricing system, weak incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 45%. Conclusions: The development of the Portuguese generic medicines market has mainly been fuelled by supply-side measures. To support the further expansion of the market, policy makers need to strengthen demand-side measures inciting physicians to prescribe, pharmacists to dispense and patients to use generic medicines. PMID:25152781

Small-sided games in team sports training: a brief review.

PubMed

Halouani, Jamel; Chtourou, Hamdi; Gabbett, Tim; Chaouachi, Anis; Chamari, Karim

2014-12-01

Small-sided games (SSGs) incorporating skills, sport-specific movements, at intensities sufficient to promote aerobic adaptations, are being increasingly implemented in professional team sport environments. Small-sided games are often employed by coaches based on the premise that the greatest training benefits occur when training simulates the specific movement patterns and physiological demands of the sport. At present, there is relatively little information regarding how SSG can best be used to improve physical capacities and technical and tactical skills in team sports. It is possible that with some modifications (e.g., number of players, pitch size, coach encouragement, and wrestling), such games may be physiologically beneficial for athletes with relatively high initial aerobic fitness levels. For instance, it has been shown that 3-a-side soccer SSG resulted in higher intensity (i.e., greater overall distance, less jogging and walking, higher heart rate, and more tackling, dribbling, goal attempts, and passes) than 5-a-side SSG. Likewise, when player numbers were kept constant, a larger playing area increased the intensity of the SSG with a smaller playing area having the opposite effect. It has also been demonstrated that energy expenditure was similar between badminton and volleyball courts, but lower than that obtained in a basketball court. Moreover, it has been demonstrated in rugby that wrestling can increase the physical demands of SSG. Consistent coach encouragement can also increase training intensity, although most rule changes have trivial or no effect on exercise intensity. Further research is required to examine the optimal periodization strategies of SSG training for the long-term development of physiological capacity, technical skill, and tactical proficiency, while also minimizing the associated risk of injuries.

An Artificial Tendon with Durable Muscle Interface

PubMed Central

Melvin, Alan; Litsky, Alan; Mayerson, Joel; Witte, David; Melvin, David; Juncosa-Melvin, Natalia

2010-01-01

A coupling mechanism that can permanently fix a forcefully contracting muscle to a bone anchor or any totally inert prosthesis would meet a serious need in orthopaedics. Our group developed the OrthoCoupler™ device to satisfy these demands. The objective of this study was to test OrthoCoupler’s performance in vitro and in vivo in the goat semitendinosus tendon model. For in vitro evaluation, 40 samples were fatigue-tested, cycling at 10 load levels, n=4 each. For in vivo evaluation, the semitendinosus tendon was removed bilaterally in 8 goats. Left sides were reattached with an OrthoCoupler, and right sides were reattached using the Krackow stitch with #5 braided polyester sutures. Specimens were harvested 60 days post-surgery and assigned for biomechanics and histology. Fatigue strength of the devices in vitro was several times the contractile force of the semitendinosus muscle. The in vivo devices were built equivalent to two of the in vitro devices, providing an additional safety factor. In strength testing at necropsy, suture controls pulled out at 120.5 ± 68.3 N, whereas each OrthoCoupler was still holding after the muscle tore, remotely, at 298±111.3N (mean ± SD)(p<0.0003). Muscle tear strength was reached with the fiber-muscle composite produced in healing still soundly intact. This technology may be of value for orthopaedic challenges in oncology, revision arthroplasty, tendon transfer, and sports-injury reconstruction. PMID:19639642

Heuristic economic assessment of the Afghanistan construction materials sector: cement and dimension stone production

USGS Publications Warehouse

Mossotti, Victor G.

2014-01-01

Over the past decade, the U.S. Government has invested more than $106 billion for physical, societal, and governmental reconstruction assistance to Afghanistan (Special Inspector General for Afghanistan Reconstruction, 2012a). This funding, along with private investment, has stimulated a growing demand for particular industrial minerals and construction materials. In support of this effort, the U.S. Geological Survey released a preliminary mineral assessment in 2007 on selected Afghan nonfuel minerals (Peters and others, 2007). More recently, the 2007 mineral assessment was updated with the inclusion of a more extensive array of Afghan nonfuel minerals (Peters and others, 2011). As a follow-up on the 2011 assessment, this report provides an analysis of the current use and prospects of the following Afghan industrial minerals required to manufacture construction materials: clays of various types, bauxite, gypsum, cement-grade limestone, aggregate (sand and gravel), and dimension stone (sandstone, quartzite, granite, slate, limestone, travertine, marble). The intention of this paper is to assess the: Use of Afghan industrial minerals to manufacture construction materials, Prospects for growth in domestic construction materials production sectors, Factors controlling the competitiveness of domestic production relative to foreign imports of construction materials, and Feasibility of using natural gas as the prime source of thermal energy and for generating electrical energy for cement production. The discussion here is based on classical principles of supply and demand. Imbedded in these principles is an understanding that the attributes of supply and demand are highly variable. For construction materials, demand for a given product may depend on seasons of the year, location of construction sites, product delivery time, political factors, governmental regulations, cultural issues, price, and how essential a given product might be to the buyer. Moreover, failure on the supply side to mirror such attributes can be deal-breakers in a transaction. For qualitative interpretation of the findings in this report, the value chain was used to conceptualize the relation between supply and demand. Although quantitative data on the Afghan construction materials sector have been hard to come by, the premise herein was that qualitative aspects of supply and demand are revealed by following the flow of funding through projects of varying sizes. It was found that the spectrum of attributes on the demand side of large multimillion dollar reconstruction projects is generally high dimensional, distributed over a broad line of construction materials at diverse locations, and in varying quantities. As interpreted herein, project funds dispensed at the higher hierarchical levels of a project are often concentrated on procurement of construction materials and services at the upper end of the value chain. In contrast, project funds dispensed at the lower hierarchical levels are disseminated across a multiplicity of subprojects, thus restricting project acquisitions to the lower end of the value chain. Evidence suggests that under the current conditions in Afghanistan producers of construction materials at the lower end of the value chain (adobe brick, aggregate, low-end marble products) can successfully compete in local markets and turn a profit. In contrast, producers of energy-intensive products such as cement will continue to face intense competition from imports, at least in the near-term. In the long-term, as infrastructure issues are resolved, and as business conditions in Afghanistan improve, domestic producers will have a locational advantage in establishing a solid niche in their respective home markets. In the process of tendering properties for cement production, the pivotal issues of abundant, reliable, and cost-effective thermal and electrical energy sources for cement production have become prominent. Over the past 50 years, powdered coal and natural gas have been proven to be excellent fuels for firing kilns at cement plants, and both fuels are used as energy sources for electricity generation. After reviewing the main aspects of the coal and natural gas sectors, it is concluded here that the issues for plant design are not that of energy source feasibility but rather that of optimization of energy technologies for a given plant at a particular time and place, based on a diverse mix of energy and transport technologies.

Scientific Challenges in Sustainable Energy Technology

NASA Astrophysics Data System (ADS)

Lewis, Nathan

2006-03-01

This presentation will describe and evaluate the challenges, both technical, political, and economic, involved with widespread adoption of renewable energy technologies. First, we estimate the available fossil fuel resources and reserves based on data from the World Energy Assessment and World Energy Council. In conjunction with the current and projected global primary power production rates, we then estimate the remaining years of supply of oil, gas, and coal for use in primary power production. We then compare the price per unit of energy of these sources to those of renewable energy technologies (wind, solar thermal, solar electric, biomass, hydroelectric, and geothermal) to evaluate the degree to which supply/demand forces stimulate a transition to renewable energy technologies in the next 20-50 years. Secondly, we evaluate the greenhouse gas buildup limitations on carbon-based power consumption as an unpriced externality to fossil-fuel consumption, considering global population growth, increased global gross domestic product, and increased energy efficiency per unit of globally averaged GDP, as produced by the Intergovernmental Panel on Climate Change (IPCC). A greenhouse gas constraint on total carbon emissions, in conjunction with global population growth, is projected to drive the demand for carbon-free power well beyond that produced by conventional supply/demand pricing tradeoffs, at potentially daunting levels relative to current renewable energy demand levels. Thirdly, we evaluate the level and timescale of R&D investment that is needed to produce the required quantity of carbon-free power by the 2050 timeframe, to support the expected global energy demand for carbon-free power. Fourth, we evaluate the energy potential of various renewable energy resources to ascertain which resources are adequately available globally to support the projected global carbon-free energy demand requirements. Fifth, we evaluate the challenges to the chemical sciences to enable the cost-effective production of carbon-free power on the needed scale by the 2050 timeframe. Finally, we discuss the effects of a change in primary power technology on the energy supply infrastructure and discuss the impact of such a change on the modes of energy consumption by the energy consumer and additional demands on the chemical sciences to support such a transition in energy supply.

Energy for the new millennium.

PubMed

Goldemberg, J; Johansson, T B; Reddy, A K; Williams, R H

2001-09-01

The evolution of thinking about energy is discussed. When the authors began collaborating 20 years ago, energy was typically considered from a growth-oriented, supply-side perspective, with a focus on consumption trends and how to expand supplies to meet rising demand. They were deeply troubled by the environmental, security and equity implications of that approach. For instance, about two billion people lack access to affordable modern energy, seriously limiting their opportunities for a better life. And energy is a significant contributor to environmental problems, including indoor air pollution, urban air pollution, acidification, and global warming. The authors saw the need to evolve a different perspective in which energy is provided in ways that help solve such serious problems. They argued that energy must become an instrument for advancing sustainable development--economically viable, need-oriented, self-reliant and environmentally sound development--and that the focus should be on the end uses of energy and the services that energy provides. Energy technological options that can help meet sustainable development goals are discussed. The necessity of developing and employing innovative technological solutions is stressed. The possibilities of technological leap-frogging that could enable developing countries to avoid repeating the mistakes of the industrialized countries is illustrated with a discussion of ethanol in Brazil. The role foreign direct investment might play in bringing advanced technologies to developing countries is highlighted. Near- and long-term strategies for rural energy are discussed. Finally, policy issues are considered for evolving the energy system so that it will be consistent with and supportive of sustainable development.

Demand Response Advanced Controls Framework and Assessment of Enabling Technology Costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potter, Jennifer; Cappers, Peter

The Demand Response Advanced Controls Framework and Assessment of Enabling Technology Costs research describe a variety of DR opportunities and the various bulk power system services they can provide. The bulk power system services are mapped to a generalized taxonomy of DR “service types”, which allows us to discuss DR opportunities and bulk power system services in fewer yet broader categories that share similar technological requirements which mainly drive DR enablement costs. The research presents a framework for the costs to automate DR and provides descriptions of the various elements that drive enablement costs. The report introduces the various DRmore » enabling technologies and end-uses, identifies the various services that each can provide to the grid and provides the cost assessment for each enabling technology. In addition to a report, this research includes a Demand Response Advanced Controls Database and User Manual. They are intended to provide users with the data that underlies this research and instructions for how to use that database more effectively and efficiently.« less

On Medical Progress and Health Care Demand: A Ces Perspective Using the Grossman Model of Health Status.

PubMed

Batinti, Alberto

2015-12-01

I propose an application of the pure-consumption version of the Grossman model of health care demand, where utility depends on consumption and health status and health status on medical care and health technology. I derive the conditions under which an improvement in health care technology leads to an increase/decrease in health care consumption. In particular, I show how the direction of the effect depends on the relationship between the constant elasticity of substitution parameters of the utility and health production functions. I find that, under the constancy assumption, the ratio of the two elasticity of substitution parameters determines the direction of a technological change on health care demand. On the other hand, the technology share parameter in the health production function contributes to the size but not to the direction of the technological effect. I finally explore how the ratio of the elasticity of substitution parameters work in measurement and practice and discuss how future research may use the theoretical insight provided here. Copyright © 2014 John Wiley & Sons, Ltd.

Investigating a 21st Century Paradox: As the Demand for Technology Jobs Increases Why Are Fewer Students Majoring in Information Systems?

ERIC Educational Resources Information Center

Burns, Timothy; Gao, Yuan; Sherman, Cherie; Vengerov, Alexander; Klein, Stephen

2014-01-01

This paper reports the results of a survey administered to 322 undergraduate business students enrolled in an introductory Information Systems course at a public liberal arts college located in the northeast US. The goal of this research was to learn, given the increased demand for technology oriented jobs, why fewer students are choosing the…

Effective new membrane for preventing postthoracotomy pleural adhesion by surface water induction technology

PubMed Central

Nakata, Mary; Goya, Seijirow; Fukayama, Toshiharu

2017-01-01

Background After thoracic surgery, adhesions between the pleura can cause substantial complications. This study investigated the effectiveness of a novel membrane utilizing surface water induction technology to prevent adhesions. Methods Eight beagles were divided into an experimental group (five males) and a control group (three females). The experimental group underwent thoracotomy on both the left and right sides of the chest. Both sides received the membrane, and the membrane on one side was glued to the pleura using tissue adhesive. The control group underwent thoracotomy only on the left side. Two weeks postoperatively, all dogs were sacrificed and adhesions were evaluated macroscopically and microscopically. Results Severe adhesion was seen between the parietal and visceral pleura in all control dogs, whereas the experimental group showed minor adhesion in only one dog on one side. Conclusions Our novel anti-adhesive membrane appeared highly effective in preventing postthoracotomy pleural adhesions. PMID:28654705

State of Practice for Emerging Waste Conversion Technologies

EPA Science Inventory

New technologies to convert municipal and other waste streams into fuels and chemical commodities, termed conversion technologies, are rapidly developing. Conversion technologies are garnering increasing interest and demand due primarily to alternative energy initiatives. These t...

The Scientific Value and Technical Challenge of Chang'E-4 Landing on the Far-side of the Moon

NASA Astrophysics Data System (ADS)

Li, Fei; Zhang, He; Wu, Xueying; Ma, Jinan; Zhou, Wenyan

2016-07-01

The mission of Chang'E-4 probe is landing on the far-side of the moon for the first time in human history. Compared with the near-side, far-side landing has unique scientific value and more challenging technology implementation. The scientific significance of the exploration of far-side of the moon and the technical difficulties and solution approach of the Chang'E-4 were discussed in this paper. In science, the far-side of the Moon is an ideal scientific platform in that it is shielded from terrestrial radio-frequency interference. The terrane that records the formation of the primordial crust is located largely on the far-side hemisphere, and there is the largest and oldest recognized impact basin in our Solar System, the South Pole-Aitken basin. In technology, the difficulties mainly includes the analysis of the influence of lunar topography of far-side on the landing descent strategy, the study of relay orbit and operating modes for the relay satellite in the Earth-Moon L2(Lagrange point 2), and the requirement analysis of autonomous management due to the relay communication. It will provide the reference for landing exploration of the far-side of the moon.

State-of-The-Art of Modeling Methodologies and Optimization Operations in Integrated Energy System

NASA Astrophysics Data System (ADS)

Zheng, Zhan; Zhang, Yongjun

2017-08-01

Rapid advances in low carbon technologies and smart energy communities are reshaping future patterns. Uncertainty in energy productions and demand sides are paving the way towards decentralization management. Current energy infrastructures could not meet with supply and consumption challenges, along with emerging environment and economic requirements. Integrated Energy System(IES) whereby electric power, natural gas, heating couples with each other demonstrates that such a significant technique would gradually become one of main comprehensive and optimal energy solutions with high flexibility, friendly renewables absorption and improving efficiency. In these global energy trends, we summarize this literature review. Firstly the accurate definition and characteristics of IES have been presented. Energy subsystem and coupling elements modeling issues are analyzed. It is pointed out that decomposed and integrated analysis methods are the key algorithms for IES optimization operations problems, followed by exploring the IES market mechanisms. Finally several future research tendencies of IES, such as dynamic modeling, peer-to-peer trading, couple market design, sare under discussion.

Rapid detection and destruction of squamous cell carcinoma of the head and neck by nano-quadrapeutics.

PubMed

Lukianova-Hleb, Ekaterina Y; Lapotko, Dmitri O

2015-10-01

Survival and quality of life remain poor for patients with head and neck squamous cell carcinoma (HNSCC) that cannot be fully resected safely, and form therapy-resistant residual and recurrent tumors. We report novel cell-level technology, quadrapeutics. Quadrapeutics converts surgery, drug, and radiation therapies into on-demand microtreatment that unites the diagnosis and treatment in 1 rapid procedure by using 4 standard components: (1) targeted gold colloids; (2) liposomal drugs; (3) a laser pulse; and (4) radiation, all at safe doses. The therapeutic strength of quadrapeutics increases with cancer aggressiveness. In animal models of a primary and microscopic residual HNSCC, quadrapeutics increased the efficacy of standard chemoradiation therapy by more than 17-fold by using only 3% to 6% of clinical doses of drug and radiation, did not cause side effects, and detected residual microtumors in vivo intraoperatively. Quadrapeutics can be applied to detect and eradicate HNSCC and similar microtumors in a safe and rapid theranostic procedure. © 2015 Wiley Periodicals, Inc.

Revision total hip arthroplasty: the femoral side using cemented implants.

PubMed

Holt, Graeme; Hook, Samantha; Hubble, Matthew

2011-02-01

Advances in surgical technique and implant technology have improved the ten-year survival after primary total hip arthroplasty (THA). Despite this, the number of revision procedures has been increasing in recent years, a trend which is predicted to continue into the future. Revision THA is a technically demanding procedure often complicated by a loss of host bone stock which may be compounded by the need to remove primary implants. Both cemented and uncemented implant designs are commonly used in the United Kingdom for primary and revision THA and much controversy still exists as to the ideal method of stem fixation. In this article we discuss revision of the femur using cemented components during revision THA. We focus on three clinical scenarios including femoral cement-in-cement revision where the primary femoral cement-bone interface remains well fixed, femoral cement-in-cement revision for peri-prosthetic femoral fractures, and femoral impaction grafting. We discuss the clinical indications, surgical techniques and clinical outcomes for each of these procedures.

Protein detection using biobarcodes.

PubMed

Müller, Uwe R

2006-10-01

Over the past 50 years the development of assays for the detection of protein analytes has been driven by continuing demands for higher levels of sensitivity and multiplexing. The result has been a progression of sandwich-type immunoassays, starting with simple radioisotopic, colorimetric, or fluorescent labeling systems to include various enzymatic or nanostructure-based signal amplification schemes, with a concomitant sensitivity increase of over 1 million fold. Multiplexing of samples and tests has been enabled by microplate and microarray platforms, respectively, or lately by various molecular barcoding systems. Two different platforms have emerged as the current front-runners by combining a nucleic acid amplification step with the standard two-sided immunoassay. In both, the captured protein analyte is replaced by a multiplicity of oligonucleotides that serve as surrogate targets. One of these platforms employs DNA or RNA polymerases for the amplification step, while detection is by fluorescence. The other is based on gold nanoparticles for both amplification as well as detection. The latter technology, now termed Biobarcode, is completely enzyme-free and offers potentially much higher multiplexing power.

Smart PV grid to reinforce the electrical network

NASA Astrophysics Data System (ADS)

AL-Hamad, Mohamed Y.; Qamber, Isa S.

2017-11-01

Photovoltaic (PV) became the new competitive energy resources of the planet and needs to be engaged in grid to break up the congestion in both Distribution and Transmission systems. The objective of this research is to reduce the load flow through the distribution and transmission equipment by 20%. This reduction will help in relief networks loaded equipment's in all networks. Many projects are starting to develop in the GCC countries and need to be organized to achieve maximum benefits from involving the Renewable Energy Sources (RES) in the network. The GCC countries have a good location for solar energy with high intensity of the solar radiation and clear sky along the year. The opportunities of the solar energy is to utilize and create a sustainable energy resource for this region. Moreover, the target of this research is to engage the PV technology in such a way to lower the over loaded equipment and increases the electricity demand at the consumer's side.

Implications of Electronic Commerce for Fiscal Policy

NASA Astrophysics Data System (ADS)

Goolsbee, Austan

In this chapter, I will consider both sides of the relationship between electronic commerce and fiscal policy. For the impact of electronic commerce on fiscal policy, I will pay particular attention to the potential sales-tax revenue losses. The data suggest that the potential losses are actually modest over the next several years. I will also consider the reverse relationship - how fiscal policy affects Internet commerce. Here the evidence suggests that taxes have a sizable effect. I point out, though, that this only supports special treatment if there is some positive externality. Without one, the tax system will lead to excessive online buying to avoid taxes. I will then deal the neglected issue of taxes and Internet access, which can create large deadweight costs both because demand may be price-sensitive and because taxes can slow the spread of new technologies. Finally, I offer some discussion of the international context of taxes and the Internet and the international temptations to raise rates on E-commerce.

Comprehensive Outcome Researches of Intralesional Steroid Injection on Benign Vocal Fold Lesions.

PubMed

Wang, Chi-Te; Lai, Mei-Shu; Hsiao, Tzu-Yu

2015-09-01

This study investigated multidimensional treatment outcomes, including prognostic factors and side effects of vocal fold steroid injection (VFSI). We recruited 126 consecutive patients, including patients with 49 nodules, 47 polyps, and 30 mucus retention cysts. All the patients received VFSI under local anesthesia in the office settings. Treatment outcomes were evaluated 1 and 2 months after the procedure, including endoscopic evaluation, perceptual voice quality (GRB scores), acoustic analysis, and 10-item Voice Handicap Index (VHI-10). More than 80% of the patients reported subjective improvements after VFSI. Objective measurements revealed significant improvements from baseline in most of the outcome parameters (P<0.05). Higher occupational vocal demands and fibrotic vocal nodules were significantly associated with poorer clinical responses as measured by the VHI-10 and GRB scores, respectively. For vocal polyps, dysphonia for more than 12 months were significantly associated with higher postoperative VHI-10 scores, whereas patients with laryngopharyngeal reflux (LPR) showed significantly poor postoperative voice quality as measured by GRB scores. Side effects after VFSI included hematoma (27%), triamcinolone deposits (4%), and vocal atrophy (1%), which resolved spontaneously within 1-2 months. Presentation with vocal fold ectasias/varicosities and higher vocal demands were significantly correlated with postoperative vocal hematoma. This study demonstrated significant improvements after VFSI in vocal nodules, polyps, and cysts. Occupational vocal demand and subtypes of vocal nodules are closely related to the treatment outcomes after VFSI, whereas symptom duration and LPR were significant prognostic factors for VFSI treatment outcomes in vocal polyps. Side effects after receiving VFSI were mostly self-limited without sequel, whereas the incidence rates might be varied by the injection approach and the timing for postoperative follow-up. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Different initiatives across Europe to enhance losartan utilization post generics: impact and implications.

PubMed

Moon, James C; Godman, Brian; Petzold, Max; Alvarez-Madrazo, Samantha; Bennett, Kathleen; Bishop, Iain; Bucsics, Anna; Hesse, Ulrik; Martin, Andrew; Simoens, Steven; Zara, Corinne; Malmström, Rickard E

2014-01-01

There is an urgent need for health authorities across Europe to fully realize potential savings from increased use of generics to sustain their healthcare systems. A variety of strategies were used across Europe following the availability of generic losartan, the first angiotensin receptor blocker (ARB) to be approved and marketed, to enhance its prescribing vs. single-sourced drugs in the class. Demand-side strategies ranged from 100% co-payment for single-sourced ARBs in Denmark to no specific measures. We hypothesized this heterogeneity of approaches would provide opportunities to explore prescribing in a class following patent expiry. Contrast the impact of the different approaches among European countries and regions to the availability of generic losartan to provide future guidance. Retrospective segmented regression analyses applying linear random coefficient models with country specific intercepts and slopes were used to assess the impact of the various initiatives across Europe following the availability of generic losartan. Utilization measured in defined daily doses (DDDs). Price reductions for generic losartan were also measured. Utilization of losartan was over 90% of all ARBs in Denmark by the study end. Multiple measures in Sweden and one English primary care group also appreciably enhanced losartan utilization. Losartan utilization actually fell in some countries with no specific demand-side measures. Considerable differences were seen in the prices of generic losartan. Delisting single-sourced ARBs produced the greatest increase in losartan utilization. Overall, multiple demand-side measures are needed to change physician prescribing habits to fully realize savings from generics. There is no apparent "spill over" effect from one class to another to influence future prescribing patterns even if these are closely related.

Risk-based water resources planning: Incorporating probabilistic nonstationary climate uncertainties

NASA Astrophysics Data System (ADS)

Borgomeo, Edoardo; Hall, Jim W.; Fung, Fai; Watts, Glenn; Colquhoun, Keith; Lambert, Chris

2014-08-01

We present a risk-based approach for incorporating nonstationary probabilistic climate projections into long-term water resources planning. The proposed methodology uses nonstationary synthetic time series of future climates obtained via a stochastic weather generator based on the UK Climate Projections (UKCP09) to construct a probability distribution of the frequency of water shortages in the future. The UKCP09 projections extend well beyond the range of current hydrological variability, providing the basis for testing the robustness of water resources management plans to future climate-related uncertainties. The nonstationary nature of the projections combined with the stochastic simulation approach allows for extensive sampling of climatic variability conditioned on climate model outputs. The probability of exceeding planned frequencies of water shortages of varying severity (defined as Levels of Service for the water supply utility company) is used as a risk metric for water resources planning. Different sources of uncertainty, including demand-side uncertainties, are considered simultaneously and their impact on the risk metric is evaluated. Supply-side and demand-side management strategies can be compared based on how cost-effective they are at reducing risks to acceptable levels. A case study based on a water supply system in London (UK) is presented to illustrate the methodology. Results indicate an increase in the probability of exceeding the planned Levels of Service across the planning horizon. Under a 1% per annum population growth scenario, the probability of exceeding the planned Levels of Service is as high as 0.5 by 2040. The case study also illustrates how a combination of supply and demand management options may be required to reduce the risk of water shortages.

Different initiatives across Europe to enhance losartan utilization post generics: impact and implications

PubMed Central

Moon, James C.; Godman, Brian; Petzold, Max; Alvarez-Madrazo, Samantha; Bennett, Kathleen; Bishop, Iain; Bucsics, Anna; Hesse, Ulrik; Martin, Andrew; Simoens, Steven; Zara, Corinne; Malmström, Rickard E.

2014-01-01

Introduction: There is an urgent need for health authorities across Europe to fully realize potential savings from increased use of generics to sustain their healthcare systems. A variety of strategies were used across Europe following the availability of generic losartan, the first angiotensin receptor blocker (ARB) to be approved and marketed, to enhance its prescribing vs. single-sourced drugs in the class. Demand-side strategies ranged from 100% co-payment for single-sourced ARBs in Denmark to no specific measures. We hypothesized this heterogeneity of approaches would provide opportunities to explore prescribing in a class following patent expiry. Objective: Contrast the impact of the different approaches among European countries and regions to the availability of generic losartan to provide future guidance. Methodology: Retrospective segmented regression analyses applying linear random coefficient models with country specific intercepts and slopes were used to assess the impact of the various initiatives across Europe following the availability of generic losartan. Utilization measured in defined daily doses (DDDs). Price reductions for generic losartan were also measured. Results: Utilization of losartan was over 90% of all ARBs in Denmark by the study end. Multiple measures in Sweden and one English primary care group also appreciably enhanced losartan utilization. Losartan utilization actually fell in some countries with no specific demand-side measures. Considerable differences were seen in the prices of generic losartan. Conclusion: Delisting single-sourced ARBs produced the greatest increase in losartan utilization. Overall, multiple demand-side measures are needed to change physician prescribing habits to fully realize savings from generics. There is no apparent “spill over” effect from one class to another to influence future prescribing patterns even if these are closely related. PMID:25339902

Incentive-compatible demand-side management for smart grids based on review strategies

NASA Astrophysics Data System (ADS)

Xu, Jie; van der Schaar, Mihaela

2015-12-01

Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

The effect of hearing aid technologies on listening in an automobile.

PubMed

Wu, Yu-Hsiang; Stangl, Elizabeth; Bentler, Ruth A; Stanziola, Rachel W

2013-06-01

Communication while traveling in an automobile often is very difficult for hearing aid users. This is because the automobile/road noise level is usually high, and listeners/drivers often do not have access to visual cues. Since the talker of interest usually is not located in front of the listener/driver, conventional directional processing that places the directivity beam toward the listener's front may not be helpful and, in fact, could have a negative impact on speech recognition (when compared to omnidirectional processing). Recently, technologies have become available in commercial hearing aids that are designed to improve speech recognition and/or listening effort in noisy conditions where talkers are located behind or beside the listener. These technologies include (1) a directional microphone system that uses a backward-facing directivity pattern (Back-DIR processing), (2) a technology that transmits audio signals from the ear with the better signal-to-noise ratio (SNR) to the ear with the poorer SNR (Side-Transmission processing), and (3) a signal processing scheme that suppresses the noise at the ear with the poorer SNR (Side-Suppression processing). The purpose of the current study was to determine the effect of (1) conventional directional microphones and (2) newer signal processing schemes (Back-DIR, Side-Transmission, and Side-Suppression) on listener's speech recognition performance and preference for communication in a traveling automobile. A single-blinded, repeated-measures design was used. Twenty-five adults with bilateral symmetrical sensorineural hearing loss aged 44 through 84 yr participated in the study. The automobile/road noise and sentences of the Connected Speech Test (CST) were recorded through hearing aids in a standard van moving at a speed of 70 mph on a paved highway. The hearing aids were programmed to omnidirectional microphone, conventional adaptive directional microphone, and the three newer schemes. CST sentences were presented from the side and back of the hearing aids, which were placed on the ears of a manikin. The recorded stimuli were presented to listeners via earphones in a sound-treated booth to assess speech recognition performance and preference with each programmed condition. Compared to omnidirectional microphones, conventional adaptive directional processing had a detrimental effect on speech recognition when speech was presented from the back or side of the listener. Back-DIR and Side-Transmission processing improved speech recognition performance (relative to both omnidirectional and adaptive directional processing) when speech was from the back and side, respectively. The performance with Side-Suppression processing was better than with adaptive directional processing when speech was from the side. The participants' preferences for a given processing scheme were generally consistent with speech recognition results. The finding that performance with adaptive directional processing was poorer than with omnidirectional microphones demonstrates the importance of selecting the correct microphone technology for different listening situations. The results also suggest the feasibility of using hearing aid technologies to provide a better listening experience for hearing aid users in automobiles. American Academy of Audiology.

Access barriers to obstetric care at health facilities in sub-Saharan Africa-a systematic review.

PubMed

Kyei-Nimakoh, Minerva; Carolan-Olah, Mary; McCann, Terence V

2017-06-06

Since 2000, the United Nations' Millennium Development Goals, which included a goal to improve maternal health by the end of 2015, has facilitated significant reductions in maternal morbidity and mortality worldwide. However, despite more focused efforts made especially by low- and middle-income countries, targets were largely unmet in sub-Saharan Africa, where women are plagued by many challenges in seeking obstetric care. The aim of this review was to synthesise literature on barriers to obstetric care at health institutions in sub-Saharan Africa. This review was guided by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist. PubMed, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and Scopus databases were electronically searched to identify studies on barriers to health facility-based obstetric care in sub-Saharan Africa, in English, and dated between 2000 and 2015. Combinations of search terms 'obstetric care', 'access', 'barriers', 'developing countries' and 'sub-Saharan Africa' were used to locate articles. Quantitative, qualitative and mixed-methods studies were considered. A narrative synthesis approach was employed to synthesise the evidence and explore relationships between included studies. One hundred and sixty articles met the inclusion criteria. Currently, obstetric care access is hindered by several demand- and supply-side barriers. The principal demand-side barriers identified were limited household resources/income, non-availability of means of transportation, indirect transport costs, a lack of information on health care services/providers, issues related to stigma and women's self-esteem/assertiveness, a lack of birth preparation, cultural beliefs/practices and ignorance about required obstetric health services. On the supply-side, the most significant barriers were cost of services, physical distance between health facilities and service users' residence, long waiting times at health facilities, poor staff knowledge and skills, poor referral practices and poor staff interpersonal relationships. Despite similarities in obstetric care barriers across sub-Saharan Africa, country-specific strategies are required to tackle the challenges mentioned. Governments need to develop strategies to improve healthcare systems and overall socioeconomic status of women, in order to tackle supply- and demand-side access barriers to obstetric care. It is also important that strategies adopted are supported by research evidence appropriate for local conditions. Finally, more research is needed, particularly, with regard to supply-side interventions that may improve the obstetric care experience of pregnant women. PROSPERO 2014 CRD42014015549.

Regional variation in health care utilization in Sweden - the importance of demand-side factors.

PubMed

Johansson, Naimi; Jakobsson, Niklas; Svensson, Mikael

2018-06-04

Differences in health care utilization across geographical areas are well documented within several countries. If the variation across areas cannot be explained by differences in medical need, it can be a sign of inefficiency or misallocation of public health care resources. In this observational, longitudinal panel study we use regional level data covering the 21 Swedish regions (county councils) over 13 years and a random effects model to assess to what degree regional variation in outpatient physician visits is explained by observed demand factors such as health, demography and socio-economic factors. The results show that regional mortality, as a proxy for population health, and demography do not explain regional variation in visits to primary care physicians, but explain about 50% of regional variation in visits to outpatient specialists. Adjusting for socio-economic and basic supply-side factors explains 33% of the regional variation in primary physician visits, but adds nothing to explaining the variation in specialist visits. 50-67% of regional variation remains unexplained by a large number of observable regional characteristics, indicating that omitted and possibly unobserved factors contribute substantially to the regional variation. We conclude that variations in health care utilization across regions is not very well explained by underlying medical need and demand, measured by mortality, demographic and socio-economic factors.

America's Opioid Epidemic: Supply and Demand Considerations.

PubMed

Clark, David J; Schumacher, Mark A

2017-11-01

America is in the midst of an opioid epidemic characterized by aggressive prescribing practices, highly prevalent opioid misuse, and rising rates of prescription and illicit opioid overdose-related deaths. Medical and lay public sentiment have become more cautious with respect to prescription opioid use in the past few years, but a comprehensive strategy to reduce our reliance on prescription opioids is lacking. Addressing this epidemic through reductions in unnecessary access to these drugs while implementing measures to reduce demand will be important components of any comprehensive solution. Key supply-side measures include avoiding overprescribing, reducing diversion, and discouraging misuse through changes in drug formulations. Important demand-side measures center around educating patients and clinicians regarding the pitfalls of opioid overuse and methods to avoid unnecessary exposure to these drugs. Anesthesiologists, by virtue of their expertise in the use of these drugs and their position in guiding opioid use around the time of surgery, have important roles to play in reducing patient exposure to opioids and providing education about appropriate use. Aside from the many immediate steps that can be taken, clinical and basic research directed at understanding the interaction between pain and opioid misuse is critical to identifying the optimal use of these powerful pain relievers in clinical practice.

Against the magnanimous in medical ethics.

PubMed

Kottow, M H

1990-09-01

Supererogatory acts are considered by some to be part of medicine, whereas others accept supererogation to be a gratuitous virtue, to be extolled when present, but not to be demanded. The present paper sides with those contending that medicine is duty-bound to benefit patients and that supererogation/altruism must per definition remain outside and beyond any role-description of the profession. Medical ethics should be bound by rational ethics and steer away from separatist views which grant exclusive privileges but also create excessive demands, way beyond what physicians perform or are willing and able to offer.

Smart Grid Development: Multinational Demo Project Analysis

NASA Astrophysics Data System (ADS)

Oleinikova, I.; Mutule, A.; Obushevs, A.; Antoskovs, N.

2016-12-01

This paper analyses demand side management (DSM) projects and stakeholders' experience with the aim to develop, promote and adapt smart grid tehnologies in Latvia. The research aims at identifying possible system service posibilites, including demand response (DR) and determining the appropriate market design for such type of services to be implemented at the Baltic power system level, with the cooperation of distribution system operator (DSO) and transmission system operator (TSO). This paper is prepared as an extract from the global smart grid best practices, smart solutions and business models.

Joint pricing, inventory, and preservation decisions for deteriorating items with stochastic demand and promotional efforts

NASA Astrophysics Data System (ADS)

Soni, Hardik N.; Chauhan, Ashaba D.

2018-03-01

This study models a joint pricing, inventory, and preservation decision-making problem for deteriorating items subject to stochastic demand and promotional effort. The generalized price-dependent stochastic demand, time proportional deterioration, and partial backlogging rates are used to model the inventory system. The objective is to find the optimal pricing, replenishment, and preservation technology investment strategies while maximizing the total profit per unit time. Based on the partial backlogging and lost sale cases, we first deduce the criterion for optimal replenishment schedules for any given price and technology investment cost. Second, we show that, respectively, total profit per time unit is concave function of price and preservation technology cost. At the end, some numerical examples and the results of a sensitivity analysis are used to illustrate the features of the proposed model.

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids.

PubMed

Pop, Claudia; Cioara, Tudor; Antal, Marcel; Anghel, Ionut; Salomie, Ioan; Bertoncini, Massimo

2018-01-09

In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.). In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced.

Implementation of Bluetooth technology in processing aspheric mirrors

NASA Astrophysics Data System (ADS)

Chen, Dong-yun; Li, Xiao-jin

2010-10-01

This paper adopts the Bluetooth wireless transmission to replace the conducting rings currently using in the active lap process to overcome the cost and abrasion problems brought by the conducting rings, which has great significance for reducing the costs of processing large aspheric mirrors. Based on the actual application requirements, Article proposes the overall program of using Bluetooth technology as data transmission, including the active lap-side and machine tool-side: In the machine tool-side, the MCU separately connects with Bluetooth module and the sensor via UART0 and UART1 serial port, and when the MCU receives the signals sending from the sensor, the MCU packs and then sends them through the Bluetooth module; while in the active lap side, the CCAL reads-out the position signals of sensor detecting in dual-port memory via one-side ports, and the other side ports connect with the MCU's high ports P4-P7, so the MCU can unpacks and stores the position signals receiving via Bluetooth module. This paper designs and implements the system's hardware circuit, and mainly introduces the ways of serial and parallel. Based upon the realized system, design the test program for the Bluetooth wireless transmission and the experiment results, in the condition of the active lap processing large aspheric mirrors, showed that Bluetooth technology can meet the requirements of practical applications.

Design of a novel, one-sided, pedal-activated wheelchair.

PubMed

Lin, T-Y; Hsiao, K-H; Yao, H-W

2011-07-01

The present paper proposes the design of a novel, one-sided, pedal-activated wheelchair for patients with hemiplegia or hemiparesis. The design comprises a planetary hub transmission, which is embedded in the hub of the wheelchair, with drive, neutral, and reverse modes. The paper first discusses the structural characteristics and motion transmission of the wheelchair, and then presents the motion design of the hub transmission, followed by assembly and testing of the prototype. The results confirm that the proposed wheelchair and hub transmission can meet users' demands, thus improving comfort and independence.

Multi-time scale dynamics in power electronics-dominated power systems

NASA Astrophysics Data System (ADS)

Yuan, Xiaoming; Hu, Jiabing; Cheng, Shijie

2017-09-01

Electric power infrastructure has recently undergone a comprehensive transformation from electromagnetics to semiconductors. Such a development is attributed to the rapid growth of power electronic converter applications in the load side to realize energy conservation and on the supply side for renewable generations and power transmissions using high voltage direct current transmission. This transformation has altered the fundamental mechanism of power system dynamics, which demands the establishment of a new theory for power system control and protection. This paper presents thoughts on a theoretical framework for the coming semiconducting power systems.

Creation of backdoors in quantum communications via laser damage

NASA Astrophysics Data System (ADS)

Makarov, Vadim; Bourgoin, Jean-Philippe; Chaiwongkhot, Poompong; Gagné, Mathieu; Jennewein, Thomas; Kaiser, Sarah; Kashyap, Raman; Legré, Matthieu; Minshull, Carter; Sajeed, Shihan

2016-09-01

Practical quantum communication (QC) protocols are assumed to be secure provided implemented devices are properly characterized and all known side channels are closed. We show that this is not always true. We demonstrate a laser-damage attack capable of modifying device behavior on demand. We test it on two practical QC systems for key distribution and coin tossing, and show that newly created deviations lead to side channels. This reveals that laser damage is a potential security risk to existing QC systems, and necessitates their testing to guarantee security.

On- and off-grid operation of hybrid renewable power plants: When are the economics favorable?

NASA Astrophysics Data System (ADS)

Petrakopoulou, F.; Santana, D.

2016-12-01

Hybrid renewable energy conversion systems offer a good alternative to conventional systems in locations where the extension of the electrical grid is difficult or not economical or where the cost of electricity is high. However, stand-alone operation implies net energy output restrictions (limited to exclusively serve the energy demand of a region), capacity oversizing and large storage facilities. In interconnected areas, on the other hand, the operational restrictions of the power stations change significantly and the efficiencies and costs of renewable technologies become more favorable. In this paper, the operation of three main renewable technologies (CSP, PV and wind) is studied assuming both hybrid and individual operation for both autonomous and inter-connected operation. The case study used is a Mediterranean island of ca. 3,000 inhabitants. Each system is optimized to fully cover the energy demand of the community. In addition, in the on-grid operation cases, it is required that the annual energy generated from the renewable sources is net positive (i.e., the island generates at least as much energy as it uses). It is found that when connected to the grid, hybridization of more than one technology is not required to satisfy the energy demand, as expected. Each of the renewable technologies investigated can satisfy the annual energy demand individually, without significant complications. In addition, the cost of electricity generated with the three studied technologies drops significantly for on-grid applications, when compared to off-grid operation. However, when compared to business-as-usual scenarios in both the on- and off-grid cases, both investigated hybrid and single-technology renewable scenarios are found to be economically viable. A sensitivity analysis reveals the limits of the acceptable costs that make the technologies favorable when compared to conventional alternatives.

A New Approach Towards Deployment of Far Side Lunar SETI Using a Tethered Link to a Near Side Antenna

NASA Astrophysics Data System (ADS)

Datta, L. V.; Guven, U.; Goel, E.

2017-10-01

Keeping in pace with the recent growth in interest in deployable space telescopes for detection of extra-solar objects, we suggest a feasible approach to make a lunar far side SETI mission a reality with the technology. available today.

Non-invasive therapy of wrinkles and lax skin using a novel multisource phase-controlled radio frequency system.

PubMed

Elman, Monica; Vider, Itzhak; Harth, Yoram; Gottfried, Varda; Shemer, Avner

2010-04-01

Abstract The last few years have shown an increased demand for non-invasive skin tightening to improve body contour. Since light (lasers or intense pulsed light sources) has a limited ability to penetrate deep into the tissue, radio frequency (RF) modalities were introduced for the reduction of lax skin to achieve skin tightening and body circumference reduction. This study presents the use of the novel 3DEEP technology for body contouring. 3DEEP is a next generation RF technology that provides targeted heating to deeper skin layers without pain or other local or systemic side effects associated with the use of the earlier generation RF systems available today. The study included 30 treatment areas on 23 healthy volunteers at two sites. The treatment protocol included four weekly and two bi-weekly (n= 6) treatments on different body areas. Results were evaluated by standardized photography and by circumference measurements at the treatment area, and were compared to changes in body weight. Significant improvement could be observed in wrinkles and skin laxity, and in the appearance of stretch marks and cellulite. Some changes appeared as early as after a single treatment. Circumference changes of up to 4.3 cm were measured.

New measurement technology for 'Critical Dynamics in Microgravity'

NASA Astrophysics Data System (ADS)

Duncan, Robert

2000-03-01

When driven away from equilibrium by a heat flux Q, the superfluid transition in ^4He evolves from a simple critical point into a fascinating and complex nonlinear region, where the onset of macroscopic quantum order is masked by Earth's gravity. Prior measurements of heat transport within this nonlinear region on Earth (and scheduled measurements on the International Space Station) require temperature resolution to 0.1 nK at 2.2 K in an exceptionally stable thermometer, with all heat flow stable to 3 fW/s. These measurements of the liquid helium temperature must be localized along the side of the experimental cell with a spatial resolution of 5 microns, and systematic offsets of the measured temperature from the true helium temperature must be controlled to within 0.3 nK. Such measurement technology has recently been developed, out-performing these demanding requirements by a comfortable margin. A new class of fundamental physics experiments may be facilitated by these recent advances in metrology. This work has been supported by the Microgravity Science Division of NASA, conducted in cooperation with JPL, and in collaboration with Mary Jayne Adriaans, Alex Babkin, S.T.P. Boyd, Peter Day, David Elliott, Beverly Klemme, T.D. McCarson, Ray Nelson, and Dmitri Sergatskov.

Technology Education Teacher Supply and Demand--A Critical Situation

ERIC Educational Resources Information Center

Moye, Johnny J.

2009-01-01

Technology education is an excellent format to integrate science, technology, engineering, and mathematics (STEM) studies by employing problem-based learning activities. However, the benefits of technology education are still generally "misunderstood by the public." The effects of technology education on increased student mathematics…

Centralized and Decentralized Control for Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Shuai; Samaan, Nader A.; Diao, Ruisheng

2011-04-29

Demand response has been recognized as an essential element of the smart grid. Frequency response, regulation and contingency reserve functions performed traditionally by generation resources are now starting to involve demand side resources. Additional benefits from demand response include peak reduction and load shifting, which will defer new infrastructure investment and improve generator operation efficiency. Technical approaches designed to realize these functionalities can be categorized into centralized control and decentralized control, depending on where the response decision is made. This paper discusses these two control philosophies and compares their relative advantages and disadvantages in terms of delay time, predictability, complexity,more » and reliability. A distribution system model with detailed household loads and controls is built to demonstrate the characteristics of the two approaches. The conclusion is that the promptness and reliability of decentralized control should be combined with the predictability and simplicity of centralized control to achieve the best performance of the smart grid.« less

MONITOR THE PHOTOVOLTAIC (PV) SYSTEM ON THE NCC ROOFTOP

EPA Science Inventory

This study will investigate the pollution emission reduction and demand-side management potential of a
100 kW PV system located on the roof of the National Computer Center (NCC). Standardized instrumentation to measure meteorological and PV system performance variables will b...

7 CFR 1717.852 - Financing purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and energy conservation, and on-grid and off-grid renewable energy systems; (2) The purchase..., except: (i) Certain load-management equipment (see 7 CFR 1710.251(c)); (ii) Renewable energy systems and RUS-approved programs of demand side management and energy conservation; and (iii) As determined by...

The Basic Economics of CD-ROM Pricing.

ERIC Educational Resources Information Center

Erkkila, John E.

1991-01-01

This explanation of how the basic economic model of pricing applies to the CD-ROM industry considers the supply and demand sides of the market and compares three distinct pricing strategies: (1) pricing to maximize profits; (2) average cost pricing; and (3) marginal cost pricing. (EAM)

Typical Toddlers' Participation in “Just-in-Time” Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study

PubMed Central

Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

2017-01-01

Purpose Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary “just in time” on an AAC application with minimized demands. Method A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10–22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. Results All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Conclusions Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age. PMID:28586825

Typical Toddlers' Participation in "Just-in-Time" Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study.

PubMed

Holyfield, Christine; Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

2017-08-15

Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary "just in time" on an AAC application with minimized demands. A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10-22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age.

Does Information Matter? The Effect of the Meth Project on Meth Use among Youths*

PubMed Central

Anderson, D. Mark

2010-01-01

Are demand-side interventions effective at curbing drug use? To the extent demand-side programs are successful, their cost effectiveness can be appealing from a policy perspective. Established in 2005, the Montana Meth Project (MMP) employs a graphic advertising campaign to deter meth use among teens. Due to the MMP’s apparent success, seven other states have adopted Meth Project campaigns. Using data from the Youth Risk Behavior Surveys (YRBS), this paper investigates whether the MMP reduced methamphetamine use among Montana’s youth. When accounting for a preexisting downward trend in meth use, effects on meth use are statistically indistinguishable from zero. These results are robust to using related changes of meth use among individuals without exposure to the campaign as controls in a difference-in-difference framework. A complementary analysis of treatment admissions data from the Treatment Episode Data Set (TEDS) confirms the MMP has had no discernable impact on meth use. PMID:20638737

Does information matter? The effect of the Meth Project on meth use among youths.

PubMed

Anderson, D Mark

2010-09-01

Are demand-side interventions effective at curbing drug use? To the extent demand-side programs are successful, their cost effectiveness can be appealing from a policy perspective. Established in 2005, the Montana Meth Project (MMP) employs a graphic advertising campaign to deter meth use among teens. Due to the MMP's apparent success, seven other states have adopted Meth Project campaigns. Using data from the Youth Risk Behavior Surveys (YRBS), this paper investigates whether the MMP reduced methamphetamine use among Montana's youth. When accounting for a preexisting downward trend in meth use, effects on meth use are statistically indistinguishable from zero. These results are robust to using related changes of meth use among individuals without exposure to the campaign as controls in a difference-in-difference framework. A complementary analysis of treatment admissions data from the Treatment Episode Data Set (TEDS) confirms the MMP has had no discernable impact on meth use. Copyright 2010 Elsevier B.V. All rights reserved.

Vacuum and the electron tube industry

NASA Astrophysics Data System (ADS)

Redhead, P. A.

2005-07-01

The electron tube industry started with the patenting of the thermionic diode by John Ambrose Fleming in 1904. The vacuum technology used by the infant tube industry was copied from the existing incandescent lamp industry. The growing demands for electron tubes for the military in the first world war led to major improvements in pumps and processing methods. By the 1920s, mass production methods were developing to satisfy the demands for receiving tubes by the burgeoning radio industry. Further expansion in the 1930s and 1940s resulted in improvements in automatic equipment for pumping vacuum tubes leading to the massive production rates of electron tubes in the second world war and the following two decades. The demand for radar during the war resulted in the development of techniques for large-scale production of microwave tubes and CRTs, the latter technology being put to good use later in TV picture tube production. The commercial introduction of the transistor ended the massive demand for receiving tubes. This review concentrates on the vacuum technology developed for receiving tube production.

Role of the Freight Sector in Future Climate Change Mitigation Scenarios

DOE PAGES

Muratori, Matteo; Smith, Steven J.; Kyle, Page; ...

2017-02-27

The freight sector's role is examined using the Global Change Assessment Model (GCAM) for a range of climate change mitigation scenarios and future freight demand assumptions. Energy usage and CO 2 emissions from freight have historically grown with a correlation to GDP, and there is limited evidence of near-term global decoupling of freight demand from GDP. Over the 21 st century, greenhouse gas (GHG) emissions from freight are projected to grow faster than passenger transportation or other major end-use sectors, with the magnitude of growth dependent on the assumed extent of long-term decoupling. In climate change mitigation scenarios that applymore » a price to GHG emissions, mitigation of freight emissions (including the effects of demand elasticity, mode and technology shifting, and fuel substitution) is more limited than for other demand sectors. In such scenarios, shifting to less-emitting transportation modes and technologies is projected to play a relatively small role in reducing freight emissions in GCAM. Finally, by contrast, changes in the supply chain of liquid fuels that reduce the fuel carbon intensity, especially deriving from large-scale use of biofuels coupled to carbon capture and storage technologies, are responsible for the majority of freight emissions mitigation, followed by price-induced reduction in freight demand services.« less

Role of the Freight Sector in Future Climate Change Mitigation Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muratori, Matteo; Smith, Steven J.; Kyle, Page

The freight sector's role is examined using the Global Change Assessment Model (GCAM) for a range of climate change mitigation scenarios and future freight demand assumptions. Energy usage and CO 2 emissions from freight have historically grown with a correlation to GDP, and there is limited evidence of near-term global decoupling of freight demand from GDP. Over the 21 st century, greenhouse gas (GHG) emissions from freight are projected to grow faster than passenger transportation or other major end-use sectors, with the magnitude of growth dependent on the assumed extent of long-term decoupling. In climate change mitigation scenarios that applymore » a price to GHG emissions, mitigation of freight emissions (including the effects of demand elasticity, mode and technology shifting, and fuel substitution) is more limited than for other demand sectors. In such scenarios, shifting to less-emitting transportation modes and technologies is projected to play a relatively small role in reducing freight emissions in GCAM. Finally, by contrast, changes in the supply chain of liquid fuels that reduce the fuel carbon intensity, especially deriving from large-scale use of biofuels coupled to carbon capture and storage technologies, are responsible for the majority of freight emissions mitigation, followed by price-induced reduction in freight demand services.« less

Role of the Freight Sector in Future Climate Change Mitigation Scenarios.

PubMed

Muratori, Matteo; Smith, Steven J; Kyle, Page; Link, Robert; Mignone, Bryan K; Kheshgi, Haroon S

2017-03-21

The freight sector's role is examined using the Global Change Assessment Model (GCAM) for a range of climate change mitigation scenarios and future freight demand assumptions. Energy usage and CO 2 emissions from freight have historically grown with a correlation to GDP, and there is limited evidence of near-term global decoupling of freight demand from GDP. Over the 21 st century, greenhouse gas (GHG) emissions from freight are projected to grow faster than passenger transportation or other major end-use sectors, with the magnitude of growth dependent on the assumed extent of long-term decoupling. In climate change mitigation scenarios that apply a price to GHG emissions, mitigation of freight emissions (including the effects of demand elasticity, mode and technology shifting, and fuel substitution) is more limited than for other demand sectors. In such scenarios, shifting to less-emitting transportation modes and technologies is projected to play a relatively small role in reducing freight emissions in GCAM. By contrast, changes in the supply chain of liquid fuels that reduce the fuel carbon intensity, especially deriving from large-scale use of biofuels coupled to carbon capture and storage technologies, are responsible for the majority of freight emissions mitigation, followed by price-induced reduction in freight demand services.

Terrestrial Planet Finder Coronagraph : technology and mission design studies

NASA Technical Reports Server (NTRS)

Ford, Virginia G.

2004-01-01

The Terrestrial Planet Finder (TPF) coronagraph study involves exploring the technologies that enable a coronagraph style instrument to image and characterize earth-like planets orbiting nearby stars. Testbeds have been developed to demonstrate the emerging technologies needed for this effort and an architecture study has resulted in designs of a facility that will provide the environment needed for the technology to function in this role. A broad community of participants is involved in this work through studies, analyses, fabrication of components, and participation in the design effort. The scope of activities - both on the technology side and in the architecture study side - will be presented in this paper. The status and the future plans of the activities will be reviewed.

Pros and cons of healthcare information technology implementation: the pros win.

PubMed

Maffei, Roxana

2006-01-01

Countless studies and investigations have been performed siding either for or against the implementation of technology in the healthcare setting. This article presents both sides of this debate, with an obvious conclusion that the pros of this debate win. The practice of information technology in the medical domain lags behind its knowledge and discovery by at least 7 years. The key to closing this gap is to show, through various studies, how information technology systems provide decision support to users at the point in time when decisions are needed. What the reader will obtain from this article is that the pros for information technology implementation in healthcare settings weigh much more and have a greater effect than the cons.

MEMS compatible illumination and imaging micro-optical systems

NASA Astrophysics Data System (ADS)

Bräuer, A.; Dannberg, P.; Duparré, J.; Höfer, B.; Schreiber, P.; Scholles, M.

2007-01-01

The development of new MOEMS demands for cooperation between researchers in micromechanics, optoelectronics and microoptics at a very early state. Additionally, microoptical technologies being compatible with structured silicon have to be developed. The microoptical technologies used for two silicon based microsystems are described in the paper. First, a very small scanning laser projector with a volume of less than 2 cm 3, which operates with a directly modulated lasers collimated with a microlens, is shown. The laser radiation illuminates a 2D-MEMS scanning mirror. The optical design is optimized for high resolution (VGA). Thermomechanical stability is realized by design and using a structured ceramics motherboard. Secondly, an ultrathin CMOS-camera having an insect inspired imaging system has been realized. It is the first experimental realization of an artificial compound eye. Micro-optical design principles and technology is used. The overall thickness of the imaging system is only 320 μm, the diagonal field of view is 21°, and the f-number is 2.6. The monolithic device consists of an UV-replicated microlens array upon a thin silica substrate with a pinhole array in a metal layer on the back side. The pitch of the pinholes differs from that of the lens array to provide individual viewing angle for each channel. The imaging chip is directly glued to a CMOS sensor with adapted pitch. The whole camera is less than 1mm thick. New packaging methods for these systems are under development.

The need for interaction between assisted reproduction technology and genetics: recommendations of the European Societies of Human Genetics and Human Reproduction and Embryology.

PubMed

2006-08-01

Infertility and reproductive genetic risk are both increasing in our societies because of lifestyle changes and possibly environmental factors. Owing to the magnitude of the problem, they have implications not only at the individual and family levels but also at the community level. This leads to an increasing demand for access to assisted reproduction technology (ART) and genetic services, especially when the cause of infertility may be genetic in origin. The increasing application of genetics in reproductive medicine and vice versa requires closer collaboration between the two disciplines. ART and genetics are rapidly evolving fields where new technologies are currently introduced without sufficient knowledge of their potential long-term effects. As for any medical procedures, there are possible unexpected effects which need to be envisaged to make sure that the balance between benefits and risks is clearly on the benefit side. The development of ART and genetics as scientific activities is creating an opportunity to understand the early stages of human development, which is leading to new and challenging findings/knowledge. However, there are opinions against investigating the early stages of development in humans who deserve respect and attention. For all these reasons, these two societies, European Society of Human Genetics (ESHG) and European Society of Human Reproduction and Embryology (ESHRE), have joined efforts to explore the issues at stake and to set up recommendations to maximize the benefit for the couples in need and for the community.

Changes to the electronic health records market in light of health information technology certification and meaningful use.

PubMed

Vest, Joshua R; Yoon, Jangho; Bossak, Brian H

2013-01-01

Health information technology (HIT) certification and meaningful use are interventions encouraging the adoption of electronic health records (EHRs) in the USA. However, these initiatives also constitute a significant intervention which will change the structure of the EHR market. To describe quantitatively recent changes to both the demand and supply sides of the EHR market. A cohort of 3447 of hospitals from the HIMSS Analytics Database (2006-10) was created. Using hospital referral regions to define the local market, we determined the percentage of hospitals using paper records, the number of vendors, and local EHR vendor competition using the Herfindahl-Hirschman Index. Changes over time were assessed using a series of regression equations and geographic information systems analyses. Overall, there was movement away from paper records, upward trends in the number of EHR vendors, and greater competition. However, changes differed according to hospital size and region of the country. Changes were greatest for small hospitals, whereas competition and the number of vendors did not change dramatically for large hospitals. The EHR market is changing most dramatically for those least equipped to handle broad technological transformation, which underscores the need for continued targeted support. Furthermore, wide variations across the nation indicate a continued role for states in the support of EHR utilization. The structure of the EHR market is undergoing substantial changes as desired by the proponents and architects of HIT certification and meaningful use. However, these transformations are not uniform for all hospitals or all the country.

Comparing Supply-Side Specifications in Models of Global Agriculture and the Food System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Sherman; van Meijl, Hans; Willenbockel, Dirk

This paper compares the theoretical specification of production and technical change across the partial equilibrium (PE) and computable general equilibrium (CGE) models of the global agricultural and food system included in the AgMIP model comparison study. The two modeling approaches have different theoretical underpinnings concerning the scope of economic activity they capture and how they represent technology and the behavior of supply and demand in markets. This paper focuses on their different specifications of technology and supply behavior, comparing their theoretical and empirical treatments. While the models differ widely in their specifications of technology, both within and between the PEmore » and CGE classes of models, we find that the theoretical responsiveness of supply to changes in prices can be similar, depending on parameter choices that define the behavior of supply functions over the domain of applicability defined by the common scenarios used in the AgMIP comparisons. In particular, we compare the theoretical specification of supply in CGE models with neoclassical production functions and PE models that focus on land and crop yields in agriculture. In practice, however, comparability of results given parameter choices is an empirical question, and the models differ in their sensitivity to variations in specification. To illustrate the issues, sensitivity analysis is done with one global CGE model, MAGNET, to indicate how the results vary with different specification of technical change, and how they compare with the results from PE models.« less

Technology Facilitation in the Rural School: An Analysis of Options.

ERIC Educational Resources Information Center

Hawkes, Mark; Halverson, Pamela; Brockmueller, Bradley

2002-01-01

A study examining technology support in rural schools surveyed 129 school technology coordinators in four upper plains states. Heavy pedagogical and technical demands were placed on rural technology coordinators. Rural technology coordinators should have teaching experience and advanced degree work in network administration, computer hardware…

78 FR 32477 - Collection of Information; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... to furnish the requisite books and records to the Commission upon demand within 14 days of the demand... through the use of automated collection techniques or other forms of information technology. Consideration...

Better service, greater efficiency : transit management for demand response systems

DOT National Transportation Integrated Search

1999-01-01

This brochure briefly describes different technologies which can enhance demand response transit systems. It covers automated scheduling and dispatching, mobile data terminals, electronic identification cards, automatic vehicle location, and geograph...

The Distributed Geothermal Market Demand Model (dGeo): Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCabe, Kevin; Mooney, Meghan E; Sigrin, Benjamin O

The National Renewable Energy Laboratory (NREL) developed the Distributed Geothermal Market Demand Model (dGeo) as a tool to explore the potential role of geothermal distributed energy resources (DERs) in meeting thermal energy demands in the United States. The dGeo model simulates the potential for deployment of geothermal DERs in the residential and commercial sectors of the continental United States for two specific technologies: ground-source heat pumps (GHP) and geothermal direct use (DU) for district heating. To quantify the opportunity space for these technologies, dGeo leverages a highly resolved geospatial database and robust bottom-up, agent-based modeling framework. This design is consistentmore » with others in the family of Distributed Generation Market Demand models (dGen; Sigrin et al. 2016), including the Distributed Solar Market Demand (dSolar) and Distributed Wind Market Demand (dWind) models. dGeo is intended to serve as a long-term scenario-modeling tool. It has the capability to simulate the technical potential, economic potential, market potential, and technology deployment of GHP and DU through the year 2050 under a variety of user-defined input scenarios. Through these capabilities, dGeo can provide substantial analytical value to various stakeholders interested in exploring the effects of various techno-economic, macroeconomic, financial, and policy factors related to the opportunity for GHP and DU in the United States. This report documents the dGeo modeling design, methodology, assumptions, and capabilities.« less

Developing Indicators for a Classroom Observation Tool on Pedagogy and Technology Integration: A Delphi Study

ERIC Educational Resources Information Center

Elmendorf, Douglas C.; Song, Liyan

2015-01-01

Rapid advances in technology and increased access to technology tools have created new instructional demands and expectations on teachers. Due to the ubiquitous presence of technology in K-12 schools, teachers are being observed on both their pedagogical and technology integration practices. Applying the technological pedagogical and content…

Future Data Communication Architectures for Safety Critical Aircraft Cabin Systems

NASA Astrophysics Data System (ADS)

Berkhahn, Sven-Olaf

2012-05-01

The cabin of modern aircraft is subject to increasing demands for fast reconfiguration and hence flexibility. These demands require studies for new network architectures and technologies of the electronic cabin systems, which consider also weight and cost reductions as well as safety constraints. Two major approaches are in consideration to reduce the complex and heavy wiring harness: the usage of a so called hybrid data bus technology, which enables the common usage of the same data bus for several electronic cabin systems with different safety and security requirements and the application of wireless data transfer technologies for electronic cabin systems.

48 CFR 41.301 - Requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... not later than 120 days prior to the date new services are required to commence an existing contract..., and the cost of providing or obtaining necessary backup and other ancillary services. (c) For new...., demand side management, load or energy management, peak shaving, on site generation, load shaping), and...

75 FR 32936 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

.... Applicants: New York Independent System Operator, Inc. Description: NYISO filing its Semi-Annual Reports on Demand Side Management programs and new generation projects in the New York Control Area. Filed Date: 06... Applicant. In reference to filings initiating a new proceeding, interventions or protests submitted on or...

7 CFR 1710.406 - Eligible activities and investments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Off Grid Renewable energy systems; (ii) Fuel cells; (3) Demand side management (DSM) investments... meter; (8) Re-lamping to more energy efficient lighting; and (9) Fuel Switching as in: (i) The replacement of existing fuel consuming equipment using a particular fuel with more efficient fuel consuming...

NATIONAL ASSESSMENT OF EMISSIONS REDUCTION IMPACT FROM ROOFTOP PV

EPA Science Inventory

This effort will determine the emissions impacts to the U.S. PV generated electricity when PV systems are installed on building rooftops and employed as demand-side power supplies. The national assessment will be based on data provided by existing rooftop PV systems that have be...

Demand-side financing for maternal and newborn health: what do we know about factors that affect implementation of cash transfers and voucher programmes?

PubMed

Hunter, Benjamin M; Murray, Susan F

2017-08-31

Demand-side financing (DSF) interventions, including cash transfers and vouchers, have been introduced to promote maternal and newborn health in a range of low- and middle-income countries. These interventions vary in design but have typically been used to increase health service utilisation by offsetting some financial costs for users, or increasing household income and incentivising 'healthy behaviours'. This article documents experiences and implementation factors associated with use of DSF in maternal and newborn health. A secondary analysis (using an adapted Supporting the Use of Research Evidence framework - SURE) was performed on studies that had previously been identified in a systematic review of evidence on DSF interventions in maternal and newborn health. The article draws on findings from 49 quantitative and 49 qualitative studies. The studies give insights on difficulties with exclusion of migrants, young and multiparous women, with demands for informal fees at facilities, and with challenges maintaining quality of care under increasing demand. Schemes experienced difficulties if communities faced long distances to reach participating facilities and poor access to transport, and where there was inadequate health infrastructure and human resources, shortages of medicines and problems with corruption. Studies that documented improved care-seeking indicated the importance of adequate programme scope (in terms of programme eligibility, size and timing of payments and voucher entitlements) to address the issue of concern, concurrent investments in supply-side capacity to sustain and/or improve quality of care, and awareness generation using community-based workers, leaders and women's groups. Evaluations spanning more than 15 years of implementation of DSF programmes reveal a complex picture of experiences that reflect the importance of financial and other social, geographical and health systems factors as barriers to accessing care. Careful design of DSF programmes as part of broader maternal and newborn health initiatives would need to take into account these barriers, the behaviours of staff and the quality of care in health facilities. Research is still needed on the policy context for DSF schemes in order to understand how they become sustainable and where they fit, or do not fit, with plans to achieve equitable universal health coverage.

The practical paradox of technology: The influence of communication technology use on employee burnout and engagement.

PubMed

Ter Hoeven, Claartje L; van Zoonen, Ward; Fonner, Kathryn L

2016-04-02

Technological advancements in the workplace frequently have produced contradictory effects by facilitating accessibility and efficiency while increasing interruptions and unpredictability. We combine insights from organizational paradoxes and the job demands-resources model to construct a framework identifying positive and negative mechanisms in the relationship between communication technology use (CTU) and employee well-being, operationalized as work engagement and burnout. In this study of Dutch workers, we demonstrate that CTU increases well-being through positive pathways (accessibility and efficiency) and decreases well-being through negative pathways (interruptions and unpredictability). We highlight the importance of (1) investigating CTU resources and demands simultaneously to grasp the relationship between CTU and employee well-being, and (2) considering CTU's downsides to successfully implement new communication technologies and flexible work designs.

Strengthening of local vital events registration: lessons learnt from a voluntary sector initiative in a district in southern India.

PubMed

Mony, Prem; Sankar, Kiruba; Thomas, Tinku; Vaz, Mario

2011-05-01

Birth and death registration rates are low in most parts of India. Poor registration rates are due to constraints in both the government system (supply-side) and the general population (demand-side). We strengthened vital event registration at the local level within the existing legal framework by: (i) involving a non-profit organization as an interface between the government and the community; (ii) conducting supply-side interventions such as sensitization workshops for government officials, training for hospital staff and building data-sharing partnerships between stakeholders; (iii) monitoring for vital events by active surveillance through lay-informants; and (iv) conducting demand-side interventions such as publicity campaigns, education of families and assistance with registration. In the government sector, registration is given low priority and there is an attitude of blaming the victim, ascribing low levels of vital event registration to "cultural reasons/ignorance ". In the community, low registration was due to lack of awareness about the importance of and procedures for registration. This initiative helped improve registration of births and deaths at the subdistrict level. Vital event registration was significantly associated with local equity stratifiers such as gender, socioeconomic status and geography. The voluntary sector can interface effectively between the government and the community to strengthen vital registration. With political support from the government, outreach activities can dramatically improve vital event registration rates, especially in disadvantaged populations. The potential relevance of the data and the data collection process to stakeholders at the local level is a critical factor for success.

The Frontal View of the Nose: Lighting Effects and Photographic Bias.

PubMed

Strub, Benedikt; Mende, Konrad; Meuli-Simmen, Claudia; Bessler, Stephan

2015-07-01

Most aesthetic rhinosurgeons rely on proper photographic documentation of the nose using several different views. The frontal view is probably the most important, but it is also the most demanding. In the frontal view, delicate, 3-dimensional (3D) anatomic structures require special photographic skills. Lighting is crucial for detail rendition and 3D reproduction of the nose, and for apparent photographic bias. We compared the quality of reproduction and photographic bias with different symmetric and asymmetric lighting in common clinical practice described in the literature. The photographs were compared for anatomic reproduction, shadowing, 3-dimensionality, and apparent changes of nasal shape (bias). Symmetric lighting did not satisfy the demands of the rhinosurgeons because of marginal 3-dimensionality, reduced detail rendition, or photographic bias. Strongly asymmetric lighting altered the nasal shape adversely for bias depending on the side of illumination, but led to very good 3-dimensionality. Slightly asymmetric lighting demonstrated the best results for detail rendition and 3-dimensionality. Classic symmetric quarter light is a practicable lighting technique with limitations in the rendition of detail and 3-dimensionality. Slightly asymmetric lighting offered a perfect compromise, with substantially improved detail rendition and 3-dimensionality. Strongly asymmetric lighting may lead to photographic bias depending on the side of illumination. Frontal documentation of the nose with asymmetric lighting should, therefore, always be performed in duplicate, with asymmetric lighting from the right side and from the left side, to prevent misleading interpretations. © 2015 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Can authorities appreciably enhance the prescribing of oral generic risperidone to conserve resources? Findings from across Europe and their implications.

PubMed

Godman, Brian; Petzold, Max; Bennett, Kathleen; Bennie, Marion; Bucsics, Anna; Finlayson, Alexander E; Martin, Andrew; Persson, Marie; Piessnegger, Jutta; Raschi, Emanuel; Simoens, Steven; Zara, Corinne; Barbui, Corrado

2014-06-13

Generic atypical antipsychotic drugs offer health authorities opportunities for considerable savings. However, schizophrenia and bipolar disorders are complex diseases that require tailored treatments. Consequently, generally there have been limited demand-side measures by health authorities to encourage the preferential prescribing of generics. This is unlike the situation with hypertension, hypercholaesterolaemia or acid-related stomach disorders.The objectives of this study were to compare the effect of the limited demand-side measures in Western European countries and regions on the subsequent prescribing of risperidone following generics; to utilise the findings to provide future guidance to health authorities; and where possible, to investigate the utilisation of generic versus originator risperidone and the prices for generic risperidone. Principally, this was a segmented regression analysis of retrospective time-series data of the effect of the various initiatives in Belgium, Ireland, Scotland and Sweden following the introduction of generic risperidone. The study included patients prescribed at least one atypical antipsychotic drug up to 20 months before and up to 20 months after generic risperidone. In addition, retrospective observational studies were carried out in Austria and Spain (Catalonia) from 2005 to 2011 as well as one English primary care organisation (Bury Primary Care Trust (PCT)). There was a consistent steady reduction in risperidone as a percentage of total selected atypical antipsychotic utilisation following generics. A similar pattern was seen in Austria and Spain, with stable utilisation in one English PCT. However, there was considerable variation in the utilisation of generic risperidone, ranging from 98% of total risperidone in Scotland to only 14% in Ireland. Similarly, the price of generic risperidone varied considerably. In Scotland, generic risperidone was only 16% of pre-patent loss prices versus 72% in Ireland. Consistent findings of no increased prescribing of risperidone post generics with limited specific demand-side measures suggests no 'spillover' effect from one class to another encouraging the preferential prescribing of generic atypical antipsychotic drugs. This is exacerbated by the complexity of the disease area and differences in the side-effects between treatments. There appeared to be no clinical issues with generic risperidone, and prices inversely reflected measures to enhance their utilisation.

Technological Change and HRD. Symposium.

ERIC Educational Resources Information Center

2002

This document contains three papers from a symposium on technological change and human resource development. "New Technologies, Cognitive Demands, and the Implications for Learning Theory" (Richard J. Torraco) identifies four specific characteristics of the tasks involved in using new technologies (contingent versus deterministic tasks,…

Progress in the Production of JP-8 Based Hydrogen and Advanced Tactical Fuels for Military Applications

DTIC Science & Technology

2011-02-01

of a multi- year program to develop, optimize, and demonstrate the military viability of a technology for on-demand production of high...continuous reactor system used for kinetic rate data experiment 86 52 Schematic of a differential reactor. The catalyst bed is kept small , and...program to develop, optimize, and demonstrate the military viability of a technology for on-demand production of high-pressure hydrogen for fuel

An Australian Land Force for Conflict in a World Without Precedent (Future Warfare Concept Paper)

DTIC Science & Technology

2009-01-01

Michael B. Ryan, Australian Army Thesis: The current pace of change in the global security environment and information technology demands that, like...information) Wave societies.6 The current pace of change in the global security environment and information technology demands that, like all...Blue, downloaded from www.defence.gov.au/navy; La Franchi , Peter, “High Level Interoperability: Future Development of t Peter, “Development Role

Emerging clean energy technology investment trends

NASA Astrophysics Data System (ADS)

Bumpus, A.; Comello, S.

2017-06-01

Early-stage capital providers and clean energy technology incubators are supporting a new wave of innovations focused on end-use efficiency and demand control. This wave complements expanding investments in supply technologies required for electricity sector decarbonization.

Using Microsensor Technology to Quantify Match Demands in Collegiate Women's Volleyball.

PubMed

Vlantes, Travis G; Readdy, Tucker

2017-12-01

Vlantes, TG and Readdy, T. Using microsensor technology to quantify match demands in collegiate women's volleyball. J Strength Cond Res 31(12): 3266-3278, 2017-The purpose of this study was to quantify internal and external load demands of women's NCAA Division I collegiate volleyball competitions using microsensor technology and session rating of perceived exertion (S-RPE). Eleven collegiate volleyball players wore microsensor technology (Optimeye S5; Catapult Sports, Chicago, IL, USA) during 15 matches played throughout the 2016 season. Parameters examined include player load (PL), high impact PL, percentage of HI PL, explosive efforts (EEs), and jumps. Session rating of perceived exertion was collected 20 minutes postmatch using a modified Borg scale. The relationship between internal and external load was explored, comparing S-RPE data with the microsensor metrics (PL, HI PL, % HI PL, EEs, and jumps). The setter had the greatest mean PL and highest number of jumps of all positions in a 5-1 system, playing all 6 rotations. Playing 4 sets yielded a mean PL increase of 25.1% over 3 sets, whereas playing 5 sets showed a 31.0% increase in PL. A multivariate analysis of variance revealed significant differences (p < 0.01) across all position groups when examining % HI PL and jumps. Cohen's d analysis revealed large (≥0.8) effect sizes for these differences. Defensive specialists recorded the greatest mean S-RPE values over all 15 matches (886 ± 384.6). Establishing positional load demands allows coaches, trainers, and strength and conditioning professionals to implement training programs for position-specific demands, creating consistent peak performance, and reducing injury risk.

Delivery and Evaluation of Synchronous Online Reading Tutoring to Students At-Risk of Reading Failure

ERIC Educational Resources Information Center

Vasquez, Eleazar, III; Forbush, David E.; Mason, Lee L.; Lockwood, April R.; Gleed, Linsey

2011-01-01

In a technological society, demands for higher literacy are ever increasing, creating grievous consequences for those who fail to meet these demands (National Research Council, 1998). Both legislative mandates, such as NCLB, and developments in the provision of reading instruction, such as RtI, have increased the demand for high quality tutoring…

Loading differences in single-leg landing in the forehand- and backhand-side courts after an overhead stroke in badminton: A novel tri-axial accelerometer research.

PubMed

Sasaki, Shogo; Nagano, Yasuharu; Ichikawa, Hiroshi

2018-05-10

Anterior cruciate ligament (ACL) injuries in badminton commonly occur during single-leg landing after an overhead stroke in the backhand-side court. This study compared differences in trunk acceleration and kinematic variables during single-leg landing in the forehand- and backhand-side courts after an overhead stroke. Eighteen female junior badminton players performed two singles games while wearing a tri-axial accelerometer. The moment that over 4g of resultant acceleration was generated was determined using synchronised video cameras. Trunk lateral inclination and hip abduction angles at the point of landing with over 4g of resultant acceleration were analysed. Mediolateral acceleration in the backhand-side court was greater than that in the opposite-side court (p < 0.001, ES = 0.840). Both trunk lateral angles were larger than those previously reported in injured participants and the hip abduction angle in the backhand-side court was larger than that in the forehand-side court (p < 0.001, ES = 2.357). The lateral and vertical acceleration in the backhand-side court showed moderate-to-strong correlations with the trunk and hip angles. The mediolateral physical demand and high-risk posture in the backhand-side court may be associated with a higher incidence of knee injuries during badminton games.

Conduction-driven cooling of LED-based automotive LED lighting systems for abating local hot spots

NASA Astrophysics Data System (ADS)

Saati, Ferina; Arik, Mehmet

2018-02-01

Light-emitting diode (LED)-based automotive lighting systems pose unique challenges, such as dual-side packaging (front side for LEDs and back side for driver electronics circuit), size, harsh ambient, and cooling. Packaging for automotive lighting applications combining the advanced printed circuit board (PCB) technology with a multifunctional LED-based board is investigated with a focus on the effect of thermal conduction-based cooling for hot spot abatement. A baseline study with a flame retardant 4 technology, commonly known as FR4 PCB, is first compared with a metal-core PCB technology, both experimentally and computationally. The double-sided advanced PCB that houses both electronics and LEDs is then investigated computationally and experimentally compared with the baseline FR4 PCB. Computational models are first developed with a commercial computational fluid dynamics software and are followed by an advanced PCB technology based on embedded heat pipes, which is computationally and experimentally studied. Then, attention is turned to studying different heat pipe orientations and heat pipe placements on the board. Results show that conventional FR4-based light engines experience local hot spots (ΔT>50°C) while advanced PCB technology based on heat pipes and thermal spreaders eliminates these local hot spots (ΔT<10°C), leading to a higher lumen extraction with improved reliability. Finally, possible design options are presented with embedded heat pipe structures that further improve the PCB performance.