Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries.

PubMed

2016-01-01

Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally. Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression. This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed. Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas. NCT02179112; Pre-results.

Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries

PubMed Central

Ademuyiwa, Adesoji O

2016-01-01

Background Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally. Methods Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression. Results This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed. Conclusions Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas. Trial registration number NCT02179112; Pre-results. PMID:28588977

Effects of Human Development Index and Its Components on Colorectal Cancer Incidence and Mortality: a Global Ecological Study.

PubMed

Khazaei, Salman; Rezaeian, Shahab; Khazaei, Somayeh; Mansori, Kamyar; Sanjari Moghaddam, Ali; Ayubi, Erfan

2016-01-01

Geographic disparity for colorectal cancer (CRC) incidence and mortality according to the human development index (HDI) might be expected. This study aimed at quantifying the effect measure of association HDI and its components on the CRC incidence and mortality. In this ecological study, CRC incidence and mortality was obtained from GLOBOCAN, the global cancer project for 172 countries. Data were extracted about HDI 2013 for 169 countries from the World Bank report. Linear regression was constructed to measure effects of HDI and its components on CRC incidence and mortality. A positive trend between increasing HDI of countries and age-standardized rates per 100,000 of CRC incidence and mortality was observed. Among HDI components education was the strongest effect measure of association on CRC incidence and mortality, regression coefficients (95% confidence intervals) being 2.8 (2.4, 3.2) and 0.9 (0.8, 1), respectively. HDI and its components were positively related with CRC incidence and mortality and can be considered as targets for prevention and treatment intervention or tracking geographic disparities.

Bioethics and its gatekeepers: does institutional racism exist in leading bioethics journals?

PubMed

Chattopadhyay, Subrata; Myser, Catherine; De Vries, Raymond

2013-03-01

Who are the gatekeepers in bioethics? Does editorial bias or institutional racism exist in leading bioethics journals? We analyzed the composition of the editorial boards of 14 leading bioethics journals by country. Categorizing these countries according to their Human Development Index (HDI), we discovered that approximately 95 percent of editorial board members are based in (very) high-HDI countries, less than 4 percent are from medium-HDI countries, and fewer than 1.5 percent are from low-HDI countries. Eight out of 14 leading bioethics journals have no editorial board members from a medium- or low-HDI country. Eleven bioethics journals have no board members from low-HDI countries. This severe underrepresentation of bioethics scholars from developing countries on editorial boards suggests that bioethics may be affected by institutional racism, raising significant questions about the ethics of bioethics in a global context.

Can education change the world? Education amplifies differences in liberalization values and innovation between developed and developing countries.

PubMed

Van Hiel, Alain; Van Assche, Jasper; De Cremer, David; Onraet, Emma; Bostyn, Dries; Haesevoets, Tessa; Roets, Arne

2018-01-01

The present study investigated the relationship between level of education and liberalization values in large, representative samples administered in 96 countries around the world (total N = 139,991). These countries show meaningful variation in terms of the Human Development Index (HDI), ranging from very poor, developing countries to prosperous, developed countries. We found evidence of cross-level interactions, consistently showing that individuals' level of education was associated with an increase in their liberalization values in higher HDI societies, whereas this relationship was curbed in lower HDI countries. This enhanced liberalization mindset of individuals in high HDI countries, in turn, was related to better scores on national indices of innovation. We conclude that this 'education amplification effect' widens the gap between lower and higher HDI countries in terms of liberalized mentality and economic growth potential. Policy implications for how low HDI countries can counter this gap are discussed.

Human Development Index (HDI) of the maternal country of origin as a predictor of perinatal outcomes - a longitudinal study conducted in Spain.

PubMed

Garcia-Tizon Larroca, S; Arevalo-Serrano, J; Duran Vila, A; Pintado Recarte, M P; Cueto Hernandez, I; Solis Pierna, A; Lizarraga Bonelli, S; De Leon-Luis, J

2017-09-21

In an era of worldwide population displacement, recent studies have identified strong associations between social situations and perinatal outcomes among immigrants. Little is known about the effect of maternal social background on pregnancy outcomes. The Human Development Index (HDI) assesses the following dimensions of human development: life expectancy, education level and income. The objective of our study was to determine if maternal HDI may be used to identify women at increased odds of poor pregnancy outcomes. We conducted a longitudinal population-based study in a tertiary centre in Madrid, Spain. The outcome variables were maternal and perinatal/antenatal mortality, preeclampsia (PE), low birth weight (LBW), gestational diabetes mellitus (GDM), preterm delivery (PTD) before 37 and 34 gestational weeks, abnormal cardiotocography (CTG) during delivery, C-section (CS) due to abnormal CTG, pH < 7.10 at birth, Apgar at 5 min ≤ 7, and resuscitation type ≥3. We performed multivariate logistic regression analyses adjusted for potential confounding variables to evaluate the associations between maternal HDI and perinatal outcomes. In total, 38,719 singleton infants who were born in our maternity ward between 2010 and 2016 and had perinatal outcome data available were included in this study. The neonates of women from medium/low HDI countries had significantly lower odds of low birth weight (LBW) than their very high HDI country counterparts (OR 0.63, 95% CI 0.55-0.72). However, the odds of PTD before 37 gestational weeks and PE were higher in the medium/low HDI group than the very high HDI group (OR 1.26, 95% CI 1.04-1.53; OR 1.35, 95% CI 1.02-1.79, respectively). Poorer neonatal outcomes were identified in the medium/low HDI group than the very high HDI group, including greater odds of abnormal CTG, CS due to abnormal CTG and Apgar 2 ≤ 7 (p < 0.05). Our findings suggest that the infants of mothers from medium/low HDI had lower odds of LBW but higher odds of PTD, PE and poor neonatal outcomes. These results support the hypothesis that maternal HDI can be used to understand the impact of maternal origin on pregnancy outcomes. Further studies are needed to confirm its validity.

Laparoscopy in management of appendicitis in high-, middle-, and low-income countries: a multicenter, prospective, cohort study.

PubMed

2018-04-05

Appendicitis is the most common abdominal surgical emergency worldwide. Differences between high- and low-income settings in the availability of laparoscopic appendectomy, alternative management choices, and outcomes are poorly described. The aim was to identify variation in surgical management and outcomes of appendicitis within low-, middle-, and high-Human Development Index (HDI) countries worldwide. This is a multicenter, international prospective cohort study. Consecutive sampling of patients undergoing emergency appendectomy over 6 months was conducted. Follow-up lasted 30 days. 4546 patients from 52 countries underwent appendectomy (2499 high-, 1540 middle-, and 507 low-HDI groups). Surgical site infection (SSI) rates were higher in low-HDI (OR 2.57, 95% CI 1.33-4.99, p = 0.005) but not middle-HDI countries (OR 1.38, 95% CI 0.76-2.52, p = 0.291), compared with high-HDI countries after adjustment. A laparoscopic approach was common in high-HDI countries (1693/2499, 67.7%), but infrequent in low-HDI (41/507, 8.1%) and middle-HDI (132/1540, 8.6%) groups. After accounting for case-mix, laparoscopy was still associated with fewer overall complications (OR 0.55, 95% CI 0.42-0.71, p < 0.001) and SSIs (OR 0.22, 95% CI 0.14-0.33, p < 0.001). In propensity-score matched groups within low-/middle-HDI countries, laparoscopy was still associated with fewer overall complications (OR 0.23 95% CI 0.11-0.44) and SSI (OR 0.21 95% CI 0.09-0.45). A laparoscopic approach is associated with better outcomes and availability appears to differ by country HDI. Despite the profound clinical, operational, and financial barriers to its widespread introduction, laparoscopy could significantly improve outcomes for patients in low-resource environments. NCT02179112.

Functional Inactivation of Putative Photosynthetic Electron Acceptor Ferredoxin C2 (FdC2) Induces Delayed Heading Date and Decreased Photosynthetic Rate in Rice

PubMed Central

Ruan, Banpu; Kang, Shujing; He, Lei; Zhang, Sen; Dong, Guojun; Hu, Jiang; Zeng, Dali; Zhang, Guangheng; Gao, Zhenyu; Ren, Deyong; Hu, Xingming; Chen, Guang; Guo, Longbiao; Qian, Qian; Zhu, Li

2015-01-01

Ferredoxin (Fd) protein as unique electron acceptor, involved in a variety of fundamental metabolic and signaling processes, which is indispensable for plant growth. The molecular mechanisms of Fd such as regulation of electron partitioning, impact of photosynthetic rate and involvement in the carbon fixing remain elusive in rice. Here we reported a heading date delay and yellowish leaf 1 (hdy1) mutant derived from Japonica rice cultivar “Nipponbare” subjected to EMS treatment. In the paddy field, the hdy1 mutant appeared at a significantly late heading date and had yellow-green leaves during the whole growth stage. Further investigation indicated that the abnormal phenotype of hdy1 was connected with depressed pigment content and photosynthetic rate. Genetic analysis results showed that the hdy1 mutant phenotype was caused by a single recessive nuclear gene mutation. Map-based cloning revealed that OsHDY1 is located on chromosome 3 and encodes an ortholog of the AtFdC2 gene. Complementation and overexpression, transgenic plants exhibited the mutant phenotype including head date, leaf color and the transcription levels of the FdC2 were completely rescued by transformation with OsHDY1. Real-time PCR revealed that the expression product of OsHDY1 was detected in almost all of the organs except root, whereas highest expression levels were observed in seeding new leaves. The lower expression levels of HDY1 and content of iron were detected in hdy1 than WT’s. The FdC2::GFP was detected in the chloroplasts of rice. Real-time PCR results showed that the expression of many photosynthetic electron transfer related genes in hdy1 were higher than WT. Our results suggest that OsFdC2 plays an important role in photosynthetic rate and development of heading date by regulating electron transfer and chlorophyll content in rice. PMID:26598971

Suicide in developing countries (1): frequency, distribution, and association with socioeconomic indicators.

PubMed

Vijayakumar, Lakshmi; Nagaraj, K; Pirkis, Jane; Whiteford, Harvey

2005-01-01

Suicide is a global public health problem, but relatively little epidemiological investigation of the phenomenon has occurred in developing countries. This paper aims to (1) examine the availability of rate data in developing countries, (2) provide a description of the frequency and distribution of suicide in those countries for which data are available, and (3) explore the relationship between country-level socioeconomic factors and suicide rates. It is accompanied by two companion papers that consider risk factors and preventive efforts associated with suicide in developing countries, respectively. Using World Health Organization data, we calculated the average annual male, female, and total suicide rates during the 1990s for individual countries and regions (classified according to the Human Development Index [HDI]), and examined the association between a range of socioeconomic indicators and suicide rates. For reasons of data availability, we concentrated on medium HDI countries. Suicide rates in these countries were variable. They were generally comparable with those in high HDI countries from the same region, with some exceptions. High education levels, high telephone density, and high per capita levels of cigarette consumption were associated with high suicide rates; high levels of inequality were associated with low suicide rates. Epidemiological investigations of this kind have the potential to inform suicide prevention efforts in developing countries, and should be encouraged.

An Overview of the Evidence and Mechanisms of Herb–Drug Interactions

PubMed Central

Fasinu, Pius S.; Bouic, Patrick J.; Rosenkranz, Bernd

2012-01-01

Despite the lack of sufficient information on the safety of herbal products, their use as alternative and/or complementary medicine is globally popular. There is also an increasing interest in medicinal herbs as precursor for pharmacological actives. Of serious concern is the concurrent consumption of herbal products and conventional drugs. Herb–drug interaction (HDI) is the single most important clinical consequence of this practice. Using a structured assessment procedure, the evidence of HDI presents with varying degree of clinical significance. While the potential for HDI for a number of herbal products is inferred from non-human studies, certain HDIs are well established through human studies and documented case reports. Various mechanisms of pharmacokinetic HDI have been identified and include the alteration in the gastrointestinal functions with consequent effects on drug absorption; induction and inhibition of metabolic enzymes and transport proteins; and alteration of renal excretion of drugs and their metabolites. Due to the intrinsic pharmacologic properties of phytochemicals, pharmacodynamic HDIs are also known to occur. The effects could be synergistic, additive, and/or antagonistic. Poor reporting on the part of patients and the inability to promptly identify HDI by health providers are identified as major factors limiting the extensive compilation of clinically relevant HDIs. A general overview and the significance of pharmacokinetic and pharmacodynamic HDI are provided, detailing basic mechanism, and nature of evidence available. An increased level of awareness of HDI is necessary among health professionals and drug discovery scientists. With the increasing number of plant-sourced pharmacological actives, the potential for HDI should always be assessed in the non-clinical safety assessment phase of drug development process. More clinically relevant research is also required in this area as current information on HDI is insufficient for clinical applications. PMID:22557968

Prevalence of metastasis at diagnosis of osteosarcoma: an international comparison

PubMed Central

Marko, Tracy A.; Diessner, Brandon J.; Spector, Logan G.

2016-01-01

Background Osteosarcoma is the most common primary malignant bone tumor in many countries, with metastatic disease responsible for most patient deaths. This study compares the prevalence of metastatic osteosarcoma at diagnosis across countries to inform the critical question of whether diagnostic delay or tumor biology drives metastases development prior to diagnosis. Procedure A literature search of the PubMed database was conducted to compare the prevalence of metastatic disease at the time of OS diagnosis between countries. A pooled prevalence with 95% confidence intervals was calculated for each study meeting inclusion criteria. Studies were grouped for analysis based on human development index (HDI) scores. Results Our analysis found an 18% (95% CI: 15%, 20%) average global pooled proportion of metastasis at osteosarcoma diagnosis. The average prevalence of metastasis at diagnosis increased as HDI groupings decreased, with very high HDI, high HDI, and medium/ low HDI groups found to be 15% (95% CI: 13%, 17%), 20% (95% CI: 14%, 28%), and 31% (95% CI: 15%, 52%), respectively. Conclusions Our evidence suggests there is a biological baseline for metastatic OS at diagnosis, which is observed in countries with very high HDI. In countries with medium/ low HDI, where there are more barriers to accessing healthcare, the higher prevalence of metastasis may result from treatment delay or an artificial prevalence inflation due to patients with less severe symptoms not presenting to clinic. Additional research in countries with medium/ low HDI may reveal that earlier detection and treatment could improve patient outcomes in those countries. PMID:26929018

Isocyanate Exposure Below Analytical Detection When a Paint Brush and Roller Are Used to Apply Moisture-Cure Polyurethane Paint.

PubMed

Reeb-Whitaker, Carolyn K; Schoonover, Todd M

2016-05-01

Isocyanate exposure is known to be hazardous when polyurethane paints are applied with a spray gun, but less is known of exposure when paint is applied with a paint brush and roller. Concentrations of 1,6-hexamethylene diisocyanate (HDI) monomer and three HDI polymers were assessed when two moisture-cure polyurethane paints containing 31-35% isocyanates were applied with a paint roller and brush. Short-term 15-min samples were taken during paint application in an indoor test environment with no ventilation (n= 12); in an outdoor test environment (n= 11); and in an outdoor in-situ assessment (n= 22). The outdoor in-situ assessment involved the painting of a bus shelter and light poles at a public transit station over two night shifts. All isocyanate samples were below analytical detection. The analytical limits of detection for HDI monomer, HDI biuret, HDI isocyanurate, and HDI uretdione were 0.005, 0.84, 0.87, and 0.88 µg, respectively. The finding that isocyanate concentrations were below detection is attributed to the use of paint roller and brush which minimize paint aerosolization and the paint formulation itself which contained <1% of volatile HDI monomer. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Surgical site infection after gastrointestinal surgery in high-income, middle-income, and low-income countries: a prospective, international, multicentre cohort study.

PubMed

2018-05-01

Surgical site infection (SSI) is one of the most common infections associated with health care, but its importance as a global health priority is not fully understood. We quantified the burden of SSI after gastrointestinal surgery in countries in all parts of the world. This international, prospective, multicentre cohort study included consecutive patients undergoing elective or emergency gastrointestinal resection within 2-week time periods at any health-care facility in any country. Countries with participating centres were stratified into high-income, middle-income, and low-income groups according to the UN's Human Development Index (HDI). Data variables from the GlobalSurg 1 study and other studies that have been found to affect the likelihood of SSI were entered into risk adjustment models. The primary outcome measure was the 30-day SSI incidence (defined by US Centers for Disease Control and Prevention criteria for superficial and deep incisional SSI). Relationships with explanatory variables were examined using Bayesian multilevel logistic regression models. This trial is registered with ClinicalTrials.gov, number NCT02662231. Between Jan 4, 2016, and July 31, 2016, 13 265 records were submitted for analysis. 12 539 patients from 343 hospitals in 66 countries were included. 7339 (58·5%) patient were from high-HDI countries (193 hospitals in 30 countries), 3918 (31·2%) patients were from middle-HDI countries (82 hospitals in 18 countries), and 1282 (10·2%) patients were from low-HDI countries (68 hospitals in 18 countries). In total, 1538 (12·3%) patients had SSI within 30 days of surgery. The incidence of SSI varied between countries with high (691 [9·4%] of 7339 patients), middle (549 [14·0%] of 3918 patients), and low (298 [23·2%] of 1282) HDI (p<0·001). The highest SSI incidence in each HDI group was after dirty surgery (102 [17·8%] of 574 patients in high-HDI countries; 74 [31·4%] of 236 patients in middle-HDI countries; 72 [39·8%] of 181 patients in low-HDI countries). Following risk factor adjustment, patients in low-HDI countries were at greatest risk of SSI (adjusted odds ratio 1·60, 95% credible interval 1·05-2·37; p=0·030). 132 (21·6%) of 610 patients with an SSI and a microbiology culture result had an infection that was resistant to the prophylactic antibiotic used. Resistant infections were detected in 49 (16·6%) of 295 patients in high-HDI countries, in 37 (19·8%) of 187 patients in middle-HDI countries, and in 46 (35·9%) of 128 patients in low-HDI countries (p<0·001). Countries with a low HDI carry a disproportionately greater burden of SSI than countries with a middle or high HDI and might have higher rates of antibiotic resistance. In view of WHO recommendations on SSI prevention that highlight the absence of high-quality interventional research, urgent, pragmatic, randomised trials based in LMICs are needed to assess measures aiming to reduce this preventable complication. DFID-MRC-Wellcome Trust Joint Global Health Trial Development Grant, National Institute of Health Research Global Health Research Unit Grant. Copyright © 2018 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license. Published by Elsevier Ltd.. All rights reserved.

Polymerization of hexamethylene diisocyanate in solution and a 260.23 m/z [M+H]+ ion in exposed human cells.

PubMed

Wisnewski, Adam V; Liu, Jian; Redlich, Carrie A; Nassar, Ala F

2018-02-15

Hexamethylene diisocyanate (HDI) is an important industrial chemical that can cause asthma, however pathogenic mechanisms remain unclear. Upon entry into the respiratory tract, HDI's N=C=O groups may undergo nucleophilic addition (conjugate) to host molecules (e.g. proteins), or instead react with water (hydrolyze), releasing CO 2 and leaving a primary amine in place of the original N=C=O. We hypothesized that (primary amine groups present on) hydrolyzed or partially hydrolyzed HDI may compete with proteins and water as a reaction target for HDI in solution, resulting in polymers that could be identified and characterized using LC-MS and LC-MS/MS. Analysis of the reaction products formed when HDI was mixed with a pH buffered, isotonic, protein containing solution identified multiple [M+H] + ions with m/z's and collision-induced dissociation (CID) fragmentation patterns consistent with those expected for dimers (259.25/285.23 m/z), and trimers (401.36/427.35 m/z) of partially hydrolyzed HDI (e.g. ureas/oligoureas). Human peripheral blood mononuclear cells (PBMCs) and monocyte-like U937, but not airway epithelial NCI-H292 cell lines cultured with these HDI ureas contained a novel 260.23 m/z [M+H] + ion. LC-MS/MS analysis of the 260.23 m/z [M+H] + ion suggest the formula C 13 H 29 N 3 O 2 and a structure containing partially hydrolyzed HDI, however definitive characterization will require further orthogonal analyses. Copyright © 2017 Elsevier Inc. All rights reserved.

Relations between a novel, reliable, and rapid index of arterial compliance (PP-HDI) and well-established inidices of arterial blood pressure (ABP) in a sample of hypertensive elderly subjects.

PubMed

Bergamini, L; Finelli, M E; Bendini, C; Ferrari, E; Veschi, M; Neviani, F; Manni, B; Pelosi, A; Rioli, G; Neri, M

2009-01-01

Hypertension is a risk factor for a long-lasting arterial wall-remodelling leading to stiffness. The rapid method measuring the pulse pressure (PP) by means of the tool of Hypertension Diagnostic Instruments (HDI) called PP-HDI, overcomes some of the problems arising with more-time consuming methods, like ambulatory blood pressure monitoring (ABPM), and give information about the elasticity of the arterial walls. We studied the relationship between the PP-HDI, the large artery compliance (LA-C) and small artery compliance (SA-C) and few well-established indices of arterial blood pressure (ABP) in a sample of 75 hypertensive subjects, aged 65 years and over. Significant correlations between LA-C and heart rate (HR), PP-ABPM and PP-HDI were found. SA-C relates with HR and systolic blood pressure (SBP) measured in lying and standing positions. Applying a stepwise regression analysis, we found that LA-C variance stems from PP-HDI and HR, while SA-C variance stems from SBP in lying position. Receiver operator characteristic (ROC) curves for thresholds of PP showed that PP-HDI reached levels of sensitivity/specificity similar to PP-ABPM. In conclusion, surveillance of ABP through hemo-dynamic indices, in particular of SBP, is essential, nevertheless the advantage of this control is not known in an elderly population where the organ damage is already evident. PP needs necessarily an instrumental measurement. The PP-HDI result is similar in reliability with respect to PPABPM, but is more rapid and well applicable in an elderly population.

Measurement of Social Development: An International Comparison

ERIC Educational Resources Information Center

Ray, Amal Kanti

2008-01-01

PQLI and HDI are the two most popular measures of development, besides per capita income. Over the years, PQLI appears to be not much in use for regional comparisons, especially after the introduction of HDI. While PQLI considers only the physical variables--adult literacy, life expectancy at birth and infant survival rate, HDI has life expectancy…

Human development and South East Asian countries: Special emphasis on India.

PubMed

Sharma, Kalpa

2013-08-31

'Development' is to improve the quality of people's lives by creating an environment for them to engage in a wide range of activities, to be healthy and well nourished, to be knowledgeable and to be able to participate in the community life. The Human Development Index (HDI) is a multi-dimensional index of development as it is the combination of three development indices- health index, education index and income index. This article attempts to compare the HDI and its components between various South East Asian countries. Secondary data is used. India's position on the HDI scale is equivalent to the South East Asian average and rank 134 out of more than 190 countries. In South East Asia, India stood fifth in HDI, behind Sri Lanka, Thailand, Maldives and Indonesia. Country has launched several schemes and programs to improve the health indicators, to provide elementary education to every child and to alleviate poverty. India's HDI value has improved with time but still country has a long way to go in achieving an acceptable HDI. Need is to strengthen the existing schemes and programs.

Human development and South East Asian countries: Special emphasis on India

PubMed Central

Sharma, Kalpa

2013-01-01

‘Development’ is to improve the quality of people's lives by creating an environment for them to engage in a wide range of activities, to be healthy and well nourished, to be knowledgeable and to be able to participate in the community life. The Human Development Index (HDI) is a multi-dimensional index of development as it is the combination of three development indices- health index, education index and income index. This article attempts to compare the HDI and its components between various South East Asian countries. Secondary data is used. India's position on the HDI scale is equivalent to the South East Asian average and rank 134 out of more than 190 countries. In South East Asia, India stood fifth in HDI, behind Sri Lanka, Thailand, Maldives and Indonesia. Country has launched several schemes and programs to improve the health indicators, to provide elementary education to every child and to alleviate poverty. India's HDI value has improved with time but still country has a long way to go in achieving an acceptable HDI. Need is to strengthen the existing schemes and programs. PMID:24251281

The incidence and mortality of ovarian cancer and their relationship with the Human Development Index in Asia

PubMed Central

Razi, Saeid; Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Aziznejhad, Hojjat; Mohammadian, Mahdi; Salehiniya, Hamid

2016-01-01

Background The incidence and mortality estimates of ovarian cancer based on human development are essential for planning by policy makers. This study is aimed at investigating the standardised incidence rates (SIR) and standardised mortality rates (SMR) of ovarian cancer and their relationship with the Human Development Index (HDI) in Asian countries. Methods This study was an ecologic study in Asia for assessment of the correlation between SIR, age standardised rates (ASR), and HDI and their details, including life expectancy at birth, mean years of schooling, and gross national income (GNI) per capita. We used the correlation bivariate method for assessment of the correlation between ASR and HDI, and its details. Statistical significance was assumed if P < 0.05. All reported P-values were two-sided. Statistical analyses were performed using SPSS (Version 15.0, SPSS Inc.). Results The highest SIR of ovarian cancer was observed in Singapore, Kazakhstan, and Brunei respectively. Indonesia, Brunei, and Afghanistan had the highest SMR. There was a positive correlation between the HDI and SIR (r = 0.143, p = 0.006). Correlation between SMR of ovarian cancer and HDI was not significant (r = 0.005, p = 052.0). Conclusion According to the findings of this study, between the HDI and SIR, there was a positive correlation, but there was no correlation between the SMR and HDI. PMID:27110284

The incidence and mortality of ovarian cancer and their relationship with the Human Development Index in Asia.

PubMed

Razi, Saeid; Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Aziznejhad, Hojjat; Mohammadian, Mahdi; Salehiniya, Hamid

2016-01-01

The incidence and mortality estimates of ovarian cancer based on human development are essential for planning by policy makers. This study is aimed at investigating the standardised incidence rates (SIR) and standardised mortality rates (SMR) of ovarian cancer and their relationship with the Human Development Index (HDI) in Asian countries. This study was an ecologic study in Asia for assessment of the correlation between SIR, age standardised rates (ASR), and HDI and their details, including life expectancy at birth, mean years of schooling, and gross national income (GNI) per capita. We used the correlation bivariate method for assessment of the correlation between ASR and HDI, and its details. Statistical significance was assumed if P < 0.05. All reported P-values were two-sided. Statistical analyses were performed using SPSS (Version 15.0, SPSS Inc.). The highest SIR of ovarian cancer was observed in Singapore, Kazakhstan, and Brunei respectively. Indonesia, Brunei, and Afghanistan had the highest SMR. There was a positive correlation between the HDI and SIR (r = 0.143, p = 0.006). Correlation between SMR of ovarian cancer and HDI was not significant (r = 0.005, p = 052.0). According to the findings of this study, between the HDI and SIR, there was a positive correlation, but there was no correlation between the SMR and HDI.

Effect of 1,6-hexamethylene diisocyanate exposure on peak flowmetry in automobile paint shop workers in Iran.

PubMed

Pourabedian, Siyamak; Barkhordari, Abdullah; Habibi, Ehsanallah; Rismanchiyan, Masoud; Zare, Mohsen

2010-06-01

The aim of this study was to investigate the effects of occupational exposure to 1,6-hexamethylene diisocyanate (HDI) on peak flowmetry in automobile body paint shop workers in Iran. We studied a population of 43 car painters exposed to HDI at their workplaces. Peak expiratory flow was tested for one working week, from the start to the end of each shift. Air was sampled and HDI analysed in parallel, according to the OSHA 42 method. Daily and weekly HDI exposure averages were (0.42+/-0.1) mg m(-3) and (0.13+/-0.05) mg m(-3), respectively. On painting days, 72 % of workers showed more than a 10 % variation in peak expiratory flow. Inhalation exposure exceeded the threshold limit value (TLV) ten times over. This strongly suggests that HDI affected the peak flowmetry in the studied workers.

Preparation and Characterization of Polyurethanes with Cross-Linked Siloxane in the Side Chain by Sol-Gel Reactions

PubMed Central

Zhao, Hui; Hao, Tong-Hui; Hu, Guo-Hua; Shi, Dean; Huang, Da; Jiang, Tao; Zhang, Qun-Chao

2017-01-01

A series of novel polyurethanes containing cross-linked siloxane in the side chain (SPU) were successfully synthesized through a sol-gel process. The SPU was composed of 0%–20% N-(n-butyl)-3-aminopropyltriethoxysilane (HDI-T) modified hexamethylene diisocynate homopolymer. The effects of HDI-T content on both the structure and properties of SPU were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), mechanical properties tests, gel content test, water contact angle measurement and water absorption test. FT-IR, XPS and XRD results confirmed the successful incorporation of HDI-T onto polyurethanes and the formation of Si–O–Si. The surface roughness and the Si content of SPU enhanced with the increase of HDI-T content. Both crystallization and melting temperature shifted to a lower point after the incorporation of HDI-T. The hydrophobicity, tensile strength, Young’s modulus and pencil hardness overall increased with the increasing of HDI-T content, whereas the thermal stability and the elongation at break of SPU slightly decreased. PMID:28772607

Human Development Inequality Index and Cancer Pattern: a Global Distributive Study.

PubMed

Rezaeian, Shahab; Khazaei, Salman; Khazaei, Somayeh; Mansori, Kamyar; Sanjari Moghaddam, Ali; Ayubi, Erfan

2016-01-01

This study aimed to quantify associations of the human development inequality (HDI) index with incidence, mortality, and mortality to incidence ratios for eight common cancers among different countries. In this ecological study, data about incidence and mortality rates of cancers was obtained from the Global Cancer Project for 169 countries. HDI indices for the same countries was obtained from the United Nations Development Program (UNDP) database. The concentration index was defined as the covariance between cumulative percentage of cancer indicators (incidence, mortality and mortality to incidence ratio) and the cumulative percentage of economic indicators (country economic rank). Results indicated that incidences of cancers of liver, cervix and esophagus were mainly concentrated in countries with a low HDI index while cancers of lung, breast, colorectum, prostate and stomach were concentrated mainly in countries with a high HDI index. The same pattern was observed for mortality from cancer except for prostate cancer that was more concentrated in countries with a low HDI index. Higher MIRs for all cancers were more concentrated in countries with a low HDI index. It was concluded that patterns of cancer occurrence correlate with care disparities at the country level.

Global Prostate Cancer Incidence and Mortality Rates According to the Human Development Index.

PubMed

Khazaei, Salman; Rezaeian, Shahab; Ayubi, Erfan; Gholamaliee, Behzad; Pishkuhi, Mahin Ahmadi; Khazaei, Somayeh; Mansori, Kamyar; Nematollahi, Shahrzad; Sani, Mohadeseh; Hanis, Shiva Mansouri

2016-01-01

Prostate cancer (PC) is one of the leading causes of death, especially in developed countries. The human development index (HDI) and its dimensions seem correlated with incidence and mortality rates of PC. This study aimed to assess the association of the specific components of HDI (life expectancy at birth, education, gross national income per 1000 capita, health, and living standards) with burden indicators of PC worldwide. Information of the incidence and mortality rates of PC was obtained from the GLOBOCAN cancer project in year 2012 and data about the HDI 2013 were obtained from the World Bank database. The correlation between incidence, mortality rates, and the HDI parameters were assessed using STATA software. A significant inequality of PC incidence rates was observed according to concentration indexes=0.25 with 95% CI (0.22, 0.34) and a negative mortality concentration index of -0.04 with 95% CI (-0.09, 0.01) was observed. A positive significant correlation was detected between the incidence rates of PC and the HDI and its dimensions including life expectancy at birth, education, income, urbanization level and obesity. However, there was a negative significant correlation between the standardized mortality rates and the life expectancy, income and HDI.

Progression of Mortality due to Diseases of the Circulatory System and Human Development Index in Rio de Janeiro Municipalities

PubMed Central

Soares, Gabriel Porto; Klein, Carlos Henrique; Silva, Nelson Albuquerque de Souza e; de Oliveira, Glaucia Maria Moraes

2016-01-01

Background Diseases of the circulatory system (DCS) are the major cause of death in Brazil and worldwide. Objective To correlate the compensated and adjusted mortality rates due to DCS in the Rio de Janeiro State municipalities between 1979 and 2010 with the Human Development Index (HDI) from 1970 onwards. Methods Population and death data were obtained in DATASUS/MS database. Mortality rates due to ischemic heart diseases (IHD), cerebrovascular diseases (CBVD) and DCS adjusted by using the direct method and compensated for ill-defined causes. The HDI data were obtained at the Brazilian Institute of Applied Research in Economics. The mortality rates and HDI values were correlated by estimating Pearson linear coefficients. The correlation coefficients between the mortality rates of census years 1991, 2000 and 2010 and HDI data of census years 1970, 1980 and 1991 were calculated with discrepancy of two demographic censuses. The linear regression coefficients were estimated with disease as the dependent variable and HDI as the independent variable. Results In recent decades, there was a reduction in mortality due to DCS in all Rio de Janeiro State municipalities, mainly because of the decline in mortality due to CBVD, which was preceded by an elevation in HDI. There was a strong correlation between the socioeconomic indicator and mortality rates. Conclusion The HDI progression showed a strong correlation with the decline in mortality due to DCS, signaling to the relevance of improvements in life conditions. PMID:27849263

Progression of Mortality due to Diseases of the Circulatory System and Human Development Index in Rio de Janeiro Municipalities.

PubMed

Soares, Gabriel Porto; Klein, Carlos Henrique; Silva, Nelson Albuquerque de Souza E; Oliveira, Glaucia Maria Moraes de

2016-10-01

Diseases of the circulatory system (DCS) are the major cause of death in Brazil and worldwide. To correlate the compensated and adjusted mortality rates due to DCS in the Rio de Janeiro State municipalities between 1979 and 2010 with the Human Development Index (HDI) from 1970 onwards. Population and death data were obtained in DATASUS/MS database. Mortality rates due to ischemic heart diseases (IHD), cerebrovascular diseases (CBVD) and DCS adjusted by using the direct method and compensated for ill-defined causes. The HDI data were obtained at the Brazilian Institute of Applied Research in Economics. The mortality rates and HDI values were correlated by estimating Pearson linear coefficients. The correlation coefficients between the mortality rates of census years 1991, 2000 and 2010 and HDI data of census years 1970, 1980 and 1991 were calculated with discrepancy of two demographic censuses. The linear regression coefficients were estimated with disease as the dependent variable and HDI as the independent variable. In recent decades, there was a reduction in mortality due to DCS in all Rio de Janeiro State municipalities, mainly because of the decline in mortality due to CBVD, which was preceded by an elevation in HDI. There was a strong correlation between the socioeconomic indicator and mortality rates. The HDI progression showed a strong correlation with the decline in mortality due to DCS, signaling to the relevance of improvements in life conditions.

A casein diet added isoflavone-enriched soy protein favorably affects biomarkers of steatohepatitis in obese Zucker rats.

PubMed

Gudbrandsen, Oddrun Anita; Wergedahl, Hege; Berge, Rolf Kristian

2009-05-01

Dietary supplementation of a soy protein enriched with isoflavones (HDI) has been shown to improve fatty liver in obese rats. The main objective of this study was to investigate whether HDI would influence the inflammatory status in livers of obese rats with fatty liver. Male obese Zucker fa/fa rats were fed casein (controls) or casein supplemented with HDI (containing 4.00 g of genistein and 4.50 g of daidzein per kilogram of diet) for 6 wk. The HDI-fed rats had a markedly lower hepatic concentration of triacylglycerol when compared with controls. The decreased aspartate transaminase/alanine transaminase ratio in plasma, together with lower circulating levels of alkaline phosphatase and bile acids after HDI feeding, implied an improved hepatitis. This was supported by decreased plasma and hepatic mRNA levels of tumor necrosis factor-alpha, lower plasma levels of interleukin-1beta and monocyte chemoattractant protein-1, and an increased anti-inflammatory fatty acid index in plasma. HDI also seemed to protect the rats from oxidative damage, because the level of lipid peroxides in triacylglycerol-rich lipoproteins after in vitro copper oxidation was lower for HDI-fed rats when compared with controls. These results show that isoflavone-enriched soy protein favorably affects biomarkers of hepatic inflammation in obese Zucker fa/fa rats with fatty liver. Thus, dietary soy proteins enriched in isoflavones may be a promising agent to improve steatohepatitis in patients.

Airborne isocyanate exposures in the collision repair industry and a comparison to occupational exposure limits.

PubMed

Reeb-Whitaker, Carolyn; Whittaker, Stephen G; Ceballos, Diana M; Weiland, Elisa C; Flack, Sheila L; Fent, Kenneth W; Thomasen, Jennifer M; Trelles Gaines, Linda G; Nylander-French, Leena A

2012-01-01

Isocyanate exposure was evaluated in 33 spray painters from 25 Washington State autobody shops. Personal breathing zone samples (n = 228) were analyzed for isophorone diisocyanate (IPDI) monomer, 1,6-hexamethylene diisocyanate (HDI) monomer, IPDI polyisocyanate, and three polyisocyanate forms of HDI. The objective was to describe exposures to isocyanates while spray painting, compare them with short-term exposure limits (STELs), and describe the isocyanate composition in the samples. The composition of polyisocyanates (IPDI and HDI) in the samples varied greatly, with maximum amounts ranging from up to 58% for HDI biuret to 96% for HDI isocyanurate. There was a significant inverse relationship between the percentage composition of HDI isocyanurate to IPDI and to HDI uretdione. Two 15-min STELs were compared: (1) Oregon's Occupational Safety and Health Administration (OR-OSHA) STEL of 1000 μg/m(3) for HDI polyisocyanate, and (2) the United Kingdom's Health and Safety Executive (UK-HSE) STEL of 70 μg NCO/m(3) for all isocyanates. Eighty percent of samples containing HDI polyisocyanate exceeded the OR-OSHA STEL while 98% of samples exceeded the UK-HSE STEL. The majority of painters (67%) wore half-face air-purifying respirators while spray painting. Using the OR-OSHA and the UK-HSE STELs as benchmarks, 21% and 67% of painters, respectively, had at least one exposure that exceeded the respirator's OSHA-assigned protection factor. A critical review of the STELs revealed the following limitations: (1) the OR-OSHA STEL does not include all polyisocyanates, and (2) the UK-HSE STEL is derived from monomeric isocyanates, whereas the species present in typical spray coatings are polyisocyanates. In conclusion, the variable mixtures of isocyanates used by autobody painters suggest that an occupational exposure limit is required that includes all polyisocyanates. Despite the limitations of the STELs, we determined that a respirator with an assigned protection factor of 25 or greater is required to protect against isocyanate exposures during spray painting. Consequently, half-face air-purifying respirators, which are most commonly used and have an assigned protection factor of 10, do not afford adequate respiratory protection.

Airborne Isocyanate Exposures in the Collision Repair Industry and a Comparison to Occupational Exposure Limits

PubMed Central

Reeb-Whitaker, Carolyn; Whittaker, Stephen G.; Ceballos, Diana M.; Weiland, Elisa C.; Flack, Sheila L.; Fent, Kenneth W.; Thomasen, Jennifer M.; Gaines, Linda G. Trelles; Nylander-French, Leena A.

2014-01-01

Isocyanate exposure was evaluated in 33 spray painters from 25 Washington State autobody shops. Personal breathing zone samples (n = 228) were analyzed for isophorone diisocyanate (IPDI) monomer, 1,6-hexamethylene diisocyanate (HDI) monomer, IPDI polyisocyanate, and three polyisocyanate forms of HDI. The objective was to describe exposures to isocyanates while spray painting, compare them with short-term exposure limits (STELs), and describe the isocyanate composition in the samples. The composition of polyisocyanates (IPDI and HDI) in the samples varied greatly, with maximum amounts ranging from up to 58% for HDI biuret to 96% for HDI isocyanurate. There was a significant inverse relationship between the percentage composition of HDI isocyanurate to IPDI and to HDI uretdione. Two 15-min STELs were compared: (1) Oregon's Occupational Safety and Health Administration (OR-OSHA) STEL of 1000 μg/m3 for HDI polyisocyanate, and (2) the United Kingdom's Health and Safety Executive (UK-HSE) STEL of 70 μg NCO/m3 for all isocyanates. Eighty percent of samples containing HDI polyisocyanate exceeded the OR-OSHA STEL while 98% of samples exceeded the UKHSE STEL. The majority of painters (67%) wore half-face air-purifying respirators while spray painting. Using the OROSHA and the UK-HSE STELs as benchmarks, 21% and 67% of painters, respectively, had at least one exposure that exceeded the respirator's OSHA-assigned protection factor. A critical review of the STELs revealed the following limitations: (1) the OR-OSHA STEL does not include all polyisocyanates, and (2) the UK-HSE STEL is derived from monomeric isocyanates, whereas the species present in typical spray coatings are polyisocyanates. In conclusion, the variable mixtures of isocyanates used by autobody painters suggest that an occupational exposure limit is required that includes all polyisocyanates. Despite the limitations of the STELs, we determined that a respirator with an assigned protection factor of 25 or greater is required to protect against isocyanate exposures during spray painting. Consequently, half-face air-purifying respirators, which are most commonly used and have an assigned protection factor of 10, do not afford adequate respiratory protection. PMID:22500941

Analysis of the interrelationship of the pulmonary irritation and elicitation thresholds in rats sensitized with 1,6-hexamethylene diisocyanate (HDI)

PubMed Central

Pauluhn, Jürgen

2015-01-01

Abstract This paper summarizes a range of experimental data central for developing a science-based approach for hazard identification of monomeric and polymeric aliphatic 1,6-hexamethylene diisocyanate (HDI). The dose–response curve of HDI-induced pulmonary responses in naïve or dermally sensitized rats after one or several inhalation priming exposures was examined in the Brown Norway (BN) rat asthma model. Emphasis was directed to demonstrate the need and the difficulty in selecting an appropriate pulmonary dose when much of the inhaled chemically reactive vapor may concentration dependently be retained in the upper airways of obligate nose-breathing rats. The course taken acknowledges the experimental challenges in identifying an elicitation threshold for HDI-monomer near or above the saturated vapor concentration or in the presence of a HDI-polymer aerosol. The inhalation threshold dose on elicitation was determined based on a fixed concentration (C) × variable exposure duration (t) protocol for improving inhalation dosimetry of the lower airways. Neutrophilic granulocytes (PMN) in bronchoalveolar lavage (BAL) fluid in equally inhalation primed naïve and dermally sensitized rats were used to define the inhalation elicitation threshold C × t. Sensitized rats elaborated markedly increased PMN challenged sensitized rats relative to equally challenged naïve rats at 5625 mg HDI/m3 × min (75 mg/m3 for 75 min). PMN were essentially indistinguishable at 900 mg HDI/m3 × min. By applying adjustment factors accounting for both inter-species differences in inhalation dosimetry and intra-species susceptibility, the workplace human-equivalent threshold C × t was estimated to be in the range of the current ACGIH TLV® of HDI. Thus, this rat “asthma” model was suitable to demonstrate elicitation thresholds for HDI-vapor after one or several inhalation priming exposures and seems to be suitable to derive occupational exposure values (OELs) for diisocyanates in general. PMID:25924102

Spatial durbin error model for human development index in Province of Central Java.

NASA Astrophysics Data System (ADS)

Septiawan, A. R.; Handajani, S. S.; Martini, T. S.

2018-05-01

The Human Development Index (HDI) is an indicator used to measure success in building the quality of human life, explaining how people access development outcomes when earning income, health and education. Every year HDI in Central Java has improved to a better direction. In 2016, HDI in Central Java was 69.98 %, an increase of 0.49 % over the previous year. The objective of this study was to apply the spatial Durbin error model using angle weights queen contiguity to measure HDI in Central Java Province. Spatial Durbin error model is used because the model overcomes the spatial effect of errors and the effects of spatial depedency on the independent variable. Factors there use is life expectancy, mean years of schooling, expected years of schooling, and purchasing power parity. Based on the result of research, we get spatial Durbin error model for HDI in Central Java with influencing factors are life expectancy, mean years of schooling, expected years of schooling, and purchasing power parity.

Human Disease Insight: An integrated knowledge-based platform for disease-gene-drug information.

PubMed

Tasleem, Munazzah; Ishrat, Romana; Islam, Asimul; Ahmad, Faizan; Hassan, Md Imtaiyaz

2016-01-01

The scope of the Human Disease Insight (HDI) database is not limited to researchers or physicians as it also provides basic information to non-professionals and creates disease awareness, thereby reducing the chances of patient suffering due to ignorance. HDI is a knowledge-based resource providing information on human diseases to both scientists and the general public. Here, our mission is to provide a comprehensive human disease database containing most of the available useful information, with extensive cross-referencing. HDI is a knowledge management system that acts as a central hub to access information about human diseases and associated drugs and genes. In addition, HDI contains well-classified bioinformatics tools with helpful descriptions. These integrated bioinformatics tools enable researchers to annotate disease-specific genes and perform protein analysis, search for biomarkers and identify potential vaccine candidates. Eventually, these tools will facilitate the analysis of disease-associated data. The HDI provides two types of search capabilities and includes provisions for downloading, uploading and searching disease/gene/drug-related information. The logistical design of the HDI allows for regular updating. The database is designed to work best with Mozilla Firefox and Google Chrome and is freely accessible at http://humandiseaseinsight.com. Copyright © 2015 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

National HIV/AIDS mortality, prevalence, and incidence rates are associated with the Human Development Index.

PubMed

Lou, Li-Xia; Chen, Yi; Yu, Chao-Hui; Li, You-Ming; Ye, Juan

2014-10-01

HIV/AIDS is a worldwide threat to human health with mortality, prevalence, and incidence rates varying widely. We evaluated the association between the global HIV/AIDS epidemic and national socioeconomic development. We obtained global age-standardized HIV/AIDS mortality, prevalence, and incidence rates from World Health Statistics Report of the World Health Organization. The human development indexes (HDIs) of 141 countries were obtained from a Human Development Report. Countries were divided into 4 groups according to the HDI distribution. We explored the association between HIV/AIDS epidemic and HDI information using Spearman correlation analysis, regression analysis, and the Kruskal-Wallis test. HIV/AIDS mortality, prevalence, and incidence rates were inversely correlated with national HDI (r = -0.675, -0.519, and -0.398, respectively; P < .001), as well as the 4 indicators of HDI (ie, life expectancy at birth, mean years of schooling, expected years of schooling, and gross national income per capita). Low HDI countries had higher HIV/AIDS mortality, prevalence, and incidence rates than that of medium, high, and very high HDI countries. Quantile regression results indicated that HDI had a greater negative effect on the HIV/AIDS epidemic in countries with more severe HIV/AIDS epidemic. Less-developed countries are likely to have more severe HIV/AIDS epidemic. There is a need to pay more attention to HIV/AIDS control in less-developed countries, where lower socioeconomic status might have accelerated the HIV/AIDS epidemic more rapidly. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Inequalities in cancer incidence and mortality across medium to highly developed countries in the twenty-first century.

PubMed

Arnold, Melina; Rentería, Elisenda; Conway, David I; Bray, Freddie; Van Ourti, Tom; Soerjomataram, Isabelle

2016-08-01

Inequalities in the burden of cancer have been well documented, and a variety of measures exist to analyse disease disparities. While previous studies have focused on inequalities within countries, the aim of the present study was to quantify existing inequalities in cancer incidence and mortality between countries. Data on total and site-specific cancer incidence and mortality in 2003-2007 were obtained for 43 countries with medium-to-high levels of human development via Cancer Incidence in Five Continents Vol. X and the WHO Mortality Database. We calculated the concentration index as a summary measure of socioeconomic-related inequality between countries. Inequalities in cancer burden differed markedly by site; the concentration index for all sites combined was 0.03 for incidence and 0.02 for mortality, pointing towards a slightly higher burden in countries with higher levels of the human development index (HDI). For both incidence and mortality, this pattern was most pronounced for melanoma. In contrast, the burden of cervical cancer was disproportionally high in countries with lower HDI levels. Prostate, lung and breast cancer contributed most to inequalities in overall cancer incidence in countries with higher HDI levels, while for mortality these were mostly driven by lung cancer in higher HDI countries and stomach cancer in countries with lower HDI levels. Global inequalities in the burden of cancer remain evident at the beginning of the twenty-first century: with a disproportionate burden of lifestyle-related cancers in countries classified as high HDI, while infection-related cancers continue to predominate in transitioning countries with lower levels of HDI.

Incidence and mortality of kidney cancers, and human development index in Asia; a matter of concern.

PubMed

Arabsalmani, Masoumeh; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Hadadian, Fatemeh; Towhidi, Farhad; Vafaee, Kamran; Salehiniya, Hamid

2017-01-01

The incidence and mortality of kidney cancer have steadily increased by 2%- 3% per decade worldwide, and an increased risk of kidney cancer has been observed in many Asian countries. The information on the incidence and mortality of a disease and its distribution is essential for better planning for prevention and further studies. This study aimed to assess the incidence and mortality of kidney cancer and their correlation with the human development index (HDI) in Asia. This ecological study was based on GLOBOCAN data Asia for assessment the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its details that include life expectancy at birth, mean years of schooling and gross national income (GNI) per capita. We use of correlation bivariate method for assessment the correlation between ASIR and ASMR with HDI and its components. A total of 121 099 kidney cancer cases were recorded in Asian countries in 2012.Overall, 80 080 cases (66.12%) were males. Sex ratio was 1.95. The three countries with the highest number of new patients were china (66 466 cases), Japan (16 830 cases), India(9658 cases), respectively. Positive correlation were seen between HDI and ASIR of kidney cancer 0.655 ( P = 0.001), and HDI and ASMR of kidney cancer 0.285 ( P = 0.055). A positive relationship between ASIR and the HDI was seen. The relationship is due to risk factors in countries with high development such as older age, smoking, hypertension, obesity, and diet. However, ASMR showed no significant relationship with HDI.

Shifting the Physical Inactivity Curve Worldwide by Closing the Gender Gap.

PubMed

Mielke, Grégore I; da Silva, Inacio Crochemore M; Kolbe-Alexander, Tracy L; Brown, Wendy J

2018-02-01

The aims of this study were to (i) examine gender differences in physical inactivity in countries with different levels of Human Development Index (HDI); and (ii) assess whether small changes in the prevalence of inactivity in women could achieve the World Health Organization's (WHO) global inactivity target. Data on inactivity were extracted for 142 countries for the year 2010 from the WHO Data Repository. Data for HDI were obtained for the year 2010 from the United Nations Development Program. Absolute and relative gender differences were calculated for countries according to four HDI categories. The potential effects of increasing women's activity levels on achievement of the WHO physical inactivity target were computed. Overall inactivity prevalence was higher in women (27%) than in men (20%). Women were more inactive than men in all except eight countries. Absolute gender differences [median 7.5% (range -10.1 to 33.2)] did not vary by HDI category, but there was a small negative correlation between relative gender difference in inactivity and HDI (rho -0.19; p = 0.02), which was mostly influenced by three outlier countries with low HDI. A decrease in inactivity levels of 4.8% points among women across the world would achieve the WHO target of reducing global levels of inactivity by 10%. Gender differences in the prevalence of physical inactivity were highly variable, both within and across categories of HDI. Interventions which result in small changes in inactivity prevalence in women would achieve the 2025 WHO global target for inactivity, without any change to the prevalence in men.

Incidence and Mortality of Breast Cancer and their Relationship with the Human Development Index (HDI) in the World in 2012.

PubMed

Ghoncheh, Mahshid; Mirzaei, Maryam; Salehiniya, Hamid

2015-01-01

Breast cancer is the most common malignancy in women worldwide and its incidence is generally increasing. In 2012, it was the second most common cancer in the world. It is necessary to obtain information on incidence and mortality for health planning. This study aimed to investigate the relationship between the human development index (HDI), and the incidence and mortality rates of breast cancer in the world in 2012. This ecologic study concerns incidence rate and standardized mortality rates of the cancer from GLOBOCAN in 2012, and HDI and its components extracted from the global bank site. Data were analyzed using correlation tests and regression with SPSS software (version 15). Among the six regions of WHO, the highest breast cancer incidence rate (67.6) was observed in the PAHO, and the lowest incidence rate was 27.8 for SEARO. There was a direct, strong, and meaningful correlation between the standardized incidence rate and HDI (r=0.725, p≤0.001). Pearson correlation test showed that there was a significant correlation between age-specific incidence rate (ASIR) and components of the HDI (life expectancy at birth, mean years of schooling, and GNP). On the other, a non-significant relationship was observed between ASIR and HDI overall (r=0.091, p=0.241). In total, a significant relationship was not found between age-specific mortality rate (ASMR) and components of HDI. Significant positive correlations exist between ASIR and components of the HDI. Socioeconomic status is directly related to the stage of the cancer and patient's survival. With increasing the incidence rate of the cancer, mortality rate from the cancer does not necessariloy increase. This may be due to more early detection and treatment in developed that developing countries. It is necessary to increase awareness of risk factors and early detection in the latter.

Anesthesia-Related and Perioperative Cardiac Arrest in Low- and High-Income Countries: A Systematic Review With Meta-Regression and Proportional Meta-Analysis.

PubMed

Koga, Fernando A; El Dib, Regina; Wakasugui, William; Roça, Cairo T; Corrente, José E; Braz, Mariana G; Braz, José R C; Braz, Leandro G

2015-09-01

The anesthesia-related cardiac arrest (CA) rate is a quality indicator to improve patient safety in the perioperative period. A systematic review with meta-analysis of the worldwide literature related to anesthesia-related CA rate has not yet been performed.This study aimed to analyze global data on anesthesia-related and perioperative CA rates according to country's Human Development Index (HDI) and by time. In addition, we compared the anesthesia-related and perioperative CA rates in low- and high-income countries in 2 time periods.A systematic review was performed using electronic databases to identify studies in which patients underwent anesthesia with anesthesia-related and/or perioperative CA rates. Meta-regression and proportional meta-analysis were performed with 95% confidence intervals (CIs) to evaluate global data on anesthesia-related and perioperative CA rates according to country's HDI and by time, and to compare the anesthesia-related and perioperative CA rates by country's HDI status (low HDI vs high HDI) and by time period (pre-1990s vs 1990s-2010s), respectively.Fifty-three studies from 21 countries assessing 11.9 million anesthetic administrations were included. Meta-regression showed that anesthesia-related (slope: -3.5729; 95% CI: -6.6306 to -0.5152; P = 0.024) and perioperative (slope: -2.4071; 95% CI: -4.0482 to -0.7659; P = 0.005) CA rates decreased with increasing HDI, but not with time. Meta-analysis showed per 10,000 anesthetics that anesthesia-related and perioperative CA rates declined in high HDI (2.3 [95% CI: 1.2-3.7] before the 1990s to 0.7 [95% CI: 0.5-1.0] in the 1990s-2010s, P < 0.001; and 8.1 [95% CI: 5.1-11.9] before the 1990s to 6.2 [95% CI: 5.1-7.4] in the 1990s-2010s, P < 0.001, respectively). In low-HDI countries, anesthesia-related CA rates did not alter significantly (9.2 [95% CI: 2.0-21.7] before the 1990s to 4.5 [95% CI: 2.4-7.2] in the 1990s-2010s, P = 0.14), whereas perioperative CA rates increased significantly (16.4 [95% CI: 1.5-47.1] before the 1990s to 19.9 [95% CI: 10.9-31.7] in the 1990s-2010s, P = 0.03).Both anesthesia-related and perioperative CA rates decrease with increasing HDI but not with time. There is a clear and consistent reduction in anesthesia-related and perioperative CA rates in high-HDI countries, but an increase in perioperative CA rates without significant alteration in the anesthesia-related CA rates in low-HDI countries comparing the 2 time periods.

Incidence and mortality of kidney cancers, and human development index in Asia; a matter of concern

PubMed Central

Arabsalmani, Masoumeh; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Hadadian, Fatemeh; Towhidi, Farhad; Vafaee, Kamran; Salehiniya, Hamid

2017-01-01

Background The incidence and mortality of kidney cancer have steadily increased by 2%- 3% per decade worldwide, and an increased risk of kidney cancer has been observed in many Asian countries. The information on the incidence and mortality of a disease and its distribution is essential for better planning for prevention and further studies. Objectives This study aimed to assess the incidence and mortality of kidney cancer and their correlation with the human development index (HDI) in Asia. Materials and Methods This ecological study was based on GLOBOCAN data Asia for assessment the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its details that include life expectancy at birth, mean years of schooling and gross national income (GNI) per capita. We use of correlation bivariate method for assessment the correlation between ASIR and ASMR with HDI and its components. Results A total of 121 099 kidney cancer cases were recorded in Asian countries in 2012.Overall, 80 080 cases (66.12%) were males. Sex ratio was 1.95. The three countries with the highest number of new patients were china (66 466 cases), Japan (16 830 cases), India(9658 cases), respectively. Positive correlation were seen between HDI and ASIR of kidney cancer 0.655 (P = 0.001), and HDI and ASMR of kidney cancer 0.285 (P = 0.055). Conclusions A positive relationship between ASIR and the HDI was seen. The relationship is due to risk factors in countries with high development such as older age, smoking, hypertension, obesity, and diet. However, ASMR showed no significant relationship with HDI. PMID:28042551

Incidence and Mortality of Breast Cancer and their Relationship to Development in Asia.

PubMed

Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Salehiniya, Hamid

2015-01-01

This study aimed to investigate the incidence and mortality of breast cancer, and its relationship with human development index (HDI) and its components in Asia in 2012. This study was an ecologic study in Asia for assessment of the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its details that include: life expectancy at birth, mean years of schooling and gross national income (GNI) per capita. Data about SIR and SMR for every Asian country for the year 2012 were obtained from the global cancer project. We used a bivariate method for assessment of the correlation between SIR and SMR and HDI and its individual components. Statistical significance was assumed if P<0.05. All reported P-values are two-sided. Statistical analyses were performed using SPSS (Version 15.0, SPSS Inc.). In 2012, 639,824 cases of breast cancer were recorded in Asian countries. Countries with the highest standardized incidence rate (ASIR) (per 100,000) were Israel (80.5), Lebanon (78.7), Armenia (74.1) and the highest standard mortality rate (ASMR) was observed in Pakistan (25.2), Armenia (24.2), and Lebanon (24). There was a positive correlation between the ASIR of breast cancer and HDI (r = 0.556, p <0.001), whereas there was a negative correlation between the ASMR of breast cancer and HDI (r = -0.051). Breast cancer incidence in countries with higher development is greater, while mortality is greatest in countries with less development. There was a positive and significant relationship between the ASIR of breast cancer and HDI and its components. Also there was a negative but non significant relationship between the ASMR of breast cancer and HDI.

Urine 1,6-Hexamethylene Diamine (HDA) Levels Among Workers Exposed to 1,6-Hexamethylene Diisocyanate (HDI)

PubMed Central

Gaines, Linda G. T.; Fent, Kenneth W.; Flack, Sheila L.; Thomasen, Jennifer M.; Ball, Louise M.; Richardson, David B.; Ding, Kai; Whittaker, Stephen G.; Nylander-french, Leena A.

2010-01-01

Urinary 1,6-hexamethylene diamine (HDA) may serve as a biomarker for systemic exposure to 1,6-hexamethylene diisocyanate (HDI) in occupationally exposed populations. However, the quantitative relationships between dermal and inhalation exposure to HDI and urine HDA levels have not been established. We measured acid-hydrolyzed urine HDA levels along with dermal and breathing-zone levels of HDI in 48 automotive spray painters. These measurements were conducted over the course of an entire workday for up to three separate workdays that were spaced approximately 1 month apart. One urine sample was collected before the start of work with HDI-containing paints and subsequent samples were collected during the workday. HDA levels varied throughout the day and ranged from nondetectable to 65.9 μg l−1 with a geometric mean and geometric standard deviation of 0.10 μg l−1 ± 6.68. Dermal exposure and inhalation exposure levels, adjusted for the type of respirator worn, were both significant predictors of urine HDA levels in the linear mixed models. Creatinine was a significant covariate when used as an independent variable along with dermal and respirator-adjusted inhalation exposure. Consequently, exposure assessment models must account for the water content of a urine sample. These findings indicate that HDA exhibits a biphasic elimination pattern, with a half-life of 2.9 h for the fast elimination phase. Our results also indicate that urine HDA level is significantly associated with systemic HDI exposure through both the skin and the lungs. We conclude that urinary HDA may be used as a biomarker of exposure to HDI, but biological monitoring should be tailored to reliably capture the intermittent exposure pattern typical in this industry. PMID:20530123

Urine 1,6-hexamethylene diamine (HDA) levels among workers exposed to 1,6-hexamethylene diisocyanate (HDI).

PubMed

Gaines, Linda G T; Fent, Kenneth W; Flack, Sheila L; Thomasen, Jennifer M; Ball, Louise M; Richardson, David B; Ding, Kai; Whittaker, Stephen G; Nylander-French, Leena A

2010-08-01

Urinary 1,6-hexamethylene diamine (HDA) may serve as a biomarker for systemic exposure to 1,6-hexamethylene diisocyanate (HDI) in occupationally exposed populations. However, the quantitative relationships between dermal and inhalation exposure to HDI and urine HDA levels have not been established. We measured acid-hydrolyzed urine HDA levels along with dermal and breathing-zone levels of HDI in 48 automotive spray painters. These measurements were conducted over the course of an entire workday for up to three separate workdays that were spaced approximately 1 month apart. One urine sample was collected before the start of work with HDI-containing paints and subsequent samples were collected during the workday. HDA levels varied throughout the day and ranged from nondetectable to 65.9 microg l(-1) with a geometric mean and geometric standard deviation of 0.10 microg l(-1) +/- 6.68. Dermal exposure and inhalation exposure levels, adjusted for the type of respirator worn, were both significant predictors of urine HDA levels in the linear mixed models. Creatinine was a significant covariate when used as an independent variable along with dermal and respirator-adjusted inhalation exposure. Consequently, exposure assessment models must account for the water content of a urine sample. These findings indicate that HDA exhibits a biphasic elimination pattern, with a half-life of 2.9 h for the fast elimination phase. Our results also indicate that urine HDA level is significantly associated with systemic HDI exposure through both the skin and the lungs. We conclude that urinary HDA may be used as a biomarker of exposure to HDI, but biological monitoring should be tailored to reliably capture the intermittent exposure pattern typical in this industry.

Quantitative plasma biomarker analysis in HDI exposure assessment.

PubMed

Flack, Sheila L; Fent, Kenneth W; Trelles Gaines, Linda G; Thomasen, Jennifer M; Whittaker, Steve; Ball, Louise M; Nylander-French, Leena A

2010-01-01

Quantification of amines in biological samples is important for evaluating occupational exposure to diisocyanates. In this study, we describe the quantification of 1,6-hexamethylene diamine (HDA) levels in hydrolyzed plasma of 46 spray painters applying 1,6-hexamethylene diisocyanate (HDI)-containing paint in vehicle repair shops collected during repeated visits to their workplace and their relationship with dermal and inhalation exposure to HDI monomer. HDA was detected in 76% of plasma samples, as heptafluorobutyryl derivatives, and the range of HDA concentrations was < or =0.02-0.92 microg l(-1). After log-transformation of the data, the correlation between plasma HDA levels and HDI inhalation exposure measured on the same workday was low (N = 108, r = 0.22, P = 0.026) compared with the correlation between plasma HDA levels and inhalation exposure occurring approximately 20 to 60 days before blood collection (N = 29, r = 0.57, P = 0.0014). The correlation between plasma HDA levels and HDI dermal exposure measured on the same workday, although statistically significant, was low (N = 108, r = 0.22, P = 0.040) while the correlation between HDA and dermal exposure occurring approximately 20 to 60 days before blood collection was slightly improved (N = 29, r = 0.36, P = 0.053). We evaluated various workplace factors and controls (i.e. location, personal protective equipment use and paint booth type) as modifiers of plasma HDA levels. Workers using a downdraft-ventilated booth had significantly lower plasma HDA levels relative to semi-downdraft and crossdraft booth types (P = 0.0108); this trend was comparable to HDI inhalation and dermal exposure levels stratified by booth type. These findings indicate that HDA concentration in hydrolyzed plasma may be used as a biomarker of cumulative inhalation and dermal exposure to HDI and for investigating the effectiveness of exposure controls in the workplace.

Early childhood development: impact of national human development, family poverty, parenting practices and access to early childhood education.

PubMed

Tran, T D; Luchters, S; Fisher, J

2017-05-01

This study was to describe and quantify the relationships among family poverty, parents' caregiving practices, access to education and the development of children living in low- and middle-income countries (LAMIC). We conducted a secondary analysis of data collected in UNICEF's Multiple Indicator Cluster Surveys (MICS). Early childhood development was assessed in four domains: language-cognitive, physical, socio-emotional and approaches to learning. Countries were classified into three groups on the basis of the Human Development Index (HDI). Overall, data from 97 731 children aged 36 to 59 months from 35 LAMIC were included in the after analyses. The mean child development scale score was 4.93 out of a maximum score of 10 (95%CI 4.90 to 4.97) in low-HDI countries and 7.08 (95%CI 7.05 to 7.12) in high-HDI countries. Family poverty was associated with lower child development scores in all countries. The total indirect effect of family poverty on child development score via attending early childhood education, care for the child at home and use of harsh punishments at home was -0.13 SD (77.8% of the total effect) in low-HDI countries, -0.09 SD (23.8% of the total effect) in medium-HDI countries and -0.02 SD (6.9% of the total effect) in high-HDI countries. Children in the most disadvantaged position in their societies and children living in low-HDI countries are at the greatest risk of failing to reach their developmental potential. Optimizing care for child development at home is essential to reduce the adverse effects of poverty on children's early development and subsequent life. © 2016 John Wiley & Sons Ltd.

Technical Summary of the Half-Degree Imager (HDI)

NASA Astrophysics Data System (ADS)

Richmond, Michael W.

2017-01-01

The Half-Degree Imager (HDI) was first attached to the WIYN 0.9-m Telescope in October, 2013. In the three years since then, it has served a large community of astronomers throughout the WIYN 0.9-m consortium. The large field of view and relatively short readout time, combined with a large selection of broad-band and narrow-band filters, make HDI a powerful tool for large-area surveys. I will provide a summary of the technical features of this CCD camera and its operations, and present statistics on its use -- showing the fraction of time lost due to bad weather and technical problems. I will reserve time to answer questions from the audience, including those who may be interested in using HDI for their own projects.

Field comparison of air sampling methods for monomeric and polymeric 1,6-hexamethylene diisocyanate.

PubMed

Thomasen, Jennifer M; Fent, Kenneth W; Reeb-Whitaker, Carolyn; Whittaker, Stephen G; Nylander-French, Leena A

2011-03-01

This study was to critically compared 13 different air samplers for their ability to monitor air exposures to monomeric and polymeric 1,6-hexamethylene diisocyanate (HDI) in the automotive refinishing industry. Using both fast- and slow-drying clearcoat, we tested the following types of samplers: single- and dual-stage 37-mm polypropylene (PP) and polystyrene (PS) samplers (open- and closed-face), IOM (with plastic and stainless steel inserts), OSHA42, IsoChek, and WA-DOSH samplers. Midget impingers with frit were used as reference samplers. We observed the PP, PS, and IOM samplers to measure greater levels of HDI monomer and biuret when a fast-drying clearcoat was applied compared with a slow-drying clearcoat. When a slow-drying clearcoat was applied, the open-face PP and PS samplers measured significantly more monomeric and polymeric HDI (2-fold; p < 0.003) than the closed-face PP and PS samplers. We determined that significantly more monomeric and polymeric HDI were measured by impingers (1.3-1.9-fold) compared with single-stage PP/PS (N = 59), dual-stage PP/PS (N = 59), or IOM (N = 24) samplers. However, when stratified by cassette characteristics, the open-face single-stage PP and PS samplers performed equally to the impingers for HDI monomer when a fast-drying clearcoat was applied, and for all analytes when a slow-drying clearcoat was applied. Significantly higher HDI monomer concentrations (1.2-3.1-fold; p = 0.001) were measured with OSHA42 compared with the impinger. The IsoChek did not detect HDI monomer, and of the three samplers analyzed by laboratories other than UNC (i.e., OSHA42, IsoChek, and WA-DOSH), the WA-DOSH was in the best agreement with the impingers. The influence of clearcoat drying time on the sampler's ability to measure monomeric and polymeric HDI emphasizes the importance of the speciation of diisocyanates in chemical analysis and the careful consideration for the selection of the air sampler to be used when measuring exposures during automotive spray painting.

Benchmarking life expectancy and cancer mortality: global comparison with cardiovascular disease 1981-2010

PubMed Central

Bray, Freddie; Beltrán-Sánchez, Hiram; Ginsburg, Ophira; Soneji, Samir; Soerjomataram, Isabelle

2017-01-01

Objective To quantify the impact of cancer (all cancers combined and major sites) compared with cardiovascular disease (CVD) on longevity worldwide during 1981-2010. Design Retrospective demographic analysis using aggregated data. Setting National civil registration systems in member states of the World Health Organization. Participants 52 populations with moderate to high quality data on cause specific mortality. Main outcome measures Disease specific contributions to changes in life expectancy in ages 40-84 (LE40-84) over time in populations grouped by two levels of Human Development Index (HDI) values. Results Declining CVD mortality rates during 1981-2010 contributed to, on average, over half of the gains in LE40-84; the corresponding gains were 2.3 (men) and 1.7 (women) years, and 0.5 (men) and 0.8 (women) years in very high and medium and high HDI populations, respectively. Declines in cancer mortality rates contributed to, on average, 20% of the gains in LE40-84, or 0.8 (men) and 0.5 (women) years in very high HDI populations, and to over 10% or 0.2 years (both sexes) in medium and high HDI populations. Declining lung cancer mortality rates brought about the largest LE40-84 gain in men in very high HDI populations (up to 0.7 years in the Netherlands), whereas in medium and high HDI populations its contribution was smaller yet still positive. Among women, declines in breast cancer mortality rates were largely responsible for the improvement in longevity, particularly among very high HDI populations (up to 0.3 years in the United Kingdom). In contrast, losses in LE40-84 were observed in many medium and high HDI populations as a result of increasing breast cancer mortality rates. Conclusions The control of CVD has led to substantial gains in LE40-84 worldwide. The inequality in improvement in longevity attributed to declining cancer mortality rates reflects inequities in implementation of cancer control, particularly in less resourced populations and in women. Global actions are needed to revitalize efforts for cancer control, with a specific focus on less resourced countries. PMID:28637656

Energy expenditure in adults living in developing compared with industrialized countries: a meta-analysis of doubly labeled water studies123

PubMed Central

Dugas, Lara R; Harders, Regina; Merrill, Sarah; Ebersole, Kara; Shoham, David A; Rush, Elaine C; Assah, Felix K; Forrester, Terrence; Durazo-Arvizu, Ramon A; Luke, Amy

2011-01-01

Background: There is an assumption that people in developing countries have a higher total energy expenditure (TEE) and physical activity level (PAL) than do people in developed nations, but few objective data for this assertion exist. Objective: We conducted a meta-analysis of TEE and PAL by using data from countries that have a low or middle human development index (HDI) compared with those with a high HDI to better understand how energy-expenditure variables are associated with development status and population differences in body size. Design: We performed a literature search for studies in which energy expenditure was measured by using doubly labeled water. Mean data on age, weight, body mass index (BMI; in kg/m2), TEE, and PAL were extracted, and HDI status was assessed. Pooled estimates of the mean effect by sex were obtained, and the extent to which age, weight, HDI status, and year of publication explained heterogeneity was assessed. Results: A total of 98 studies (14 studies from low- or middle-HDI countries) that represented 183 cohorts and 4972 individuals were included. Mean (±SE) BMI was lower in countries with a low or middle HDI than in those with a high HDI for both men and women (22.7 ± 1.0 compared with 26.0 ± 0.7, respectively, in men and 24.3 ± 0.7 compared with 26.6 ± 0.4, respectively, in women). In meta-regression models, there was an inverse association of age (P < 0.001) and a positive association of weight (P < 0.001) with TEE for both sexes; there was an association of age only in men with PAL (P < 0.001). There was no association of HDI status with either TEE or PAL. Conclusion: TEE adjusted for weight and age or PAL did not differ significantly between developing and industrialized countries, which calls into question the role of energy expenditure in the cause of obesity at the population level. PMID:21159791

Hemoglobin adducts in workers exposed to 1,6-hexamethylene diisocyanate

PubMed Central

Flack, Sheila L.; Fent, Kenneth W.; Gaines, Linda G. T.; Thomasen, Jennifer M.; Whittaker, Stephen G.; Ball, Louise M.; Nylander-French, Leena A.

2014-01-01

We investigated the utility of 1,6-hexamethylene diamine (HDA) hemoglobin adducts as biomarkers of exposure to 1,6-hexamethylene diisocyanate (HDI) monomer. Blood samples from 15 spray painters applying HDI-containing paint were analyzed for hemoglobin HDA (HDA-Hb) and N-acetyl-1,6-hexamethylene diamine (monoacetyl-HDA-Hb) by GC-MS. HDA-Hb was detected in the majority of workers (≤1.2–37 ng/g Hb), whereas monoacetyl-HDA-Hb was detected in one worker (0.06 ng/g Hb). The stronger, positive association between HDA-Hb and cumulative HDI exposure (r2 = 0.3, p < 0.06) than same day exposure (p ≥ 0.13) indicates long-term elimination kinetics for HDA-Hb adducts. This association demonstrates the suitability of HDA-Hb adducts for further validation as a biomarker of HDI exposure. PMID:21506697

Occupational exposure to HDI: progress and challenges in biomarker analysis.

PubMed

Flack, Sheila L; Ball, Louise M; Nylander-French, Leena A

2010-10-01

1,6-Hexamethylene diisocyanate (HDI) is extensively used in the automotive repair industry and is a commonly reported cause of occupational asthma in industrialized populations. However, the exact pathological mechanism remains uncertain. Characterization and quantification of biomarkers resulting from HDI exposure can fill important knowledge gaps between exposure, susceptibility, and the rise of immunological reactions and sensitization leading to asthma. Here, we discuss existing challenges in HDI biomarker analysis including the quantification of N-acetyl-1,6-hexamethylene diamine (monoacetyl-HDA) and N,N'-diacetyl-1,6-hexamethylene diamine (diacetyl-HDA) in urine samples based on previously established methods for HDA analysis. In addition, we describe the optimization of reaction conditions for the synthesis of monoacetyl-HDA and diacetyl-HDA, and utilize these standards for the quantification of these metabolites in the urine of three occupationally exposed workers. Diacetyl-HDA was present in untreated urine at 0.015-0.060 μg/l. Using base hydrolysis, the concentration range of monoacetyl-HDA in urine was 0.19-2.2 μg/l, 60-fold higher than in the untreated samples on average. HDA was detected only in one sample after base hydrolysis (0.026 μg/l). In contrast, acid hydrolysis yielded HDA concentrations ranging from 0.36 to 10.1 μg/l in these three samples. These findings demonstrate HDI metabolism via N-acetylation metabolic pathway and protein adduct formation resulting from occupational exposure to HDI. Copyright © 2010 Elsevier B.V. All rights reserved.

Incidence and Mortality of Testicular Cancer and Relationships with Development in Asia.

PubMed

Sadeghi, Mostafa; Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Gandomani, Hamidreza Sadeghi; Rafiemanesh, Hosein; Salehiniya, Hamid

2016-01-01

Testicular cancer is one of the most common cancers among young men between ages 20-34 in countries with high or very high levels of the Human Development Index (HDI). This study investigated the incidence and mortality of prostate cancer and the relationship with the HDI and its dimensions in Asia in 2012. The study was conducted based on data from the world data of cancer and the World Bank (including the HDI and its components). Standardized incidence and mortality rates of testicular cancer were calculated for Asian countries. Correlations between incidence and/ormortality rates, and the HDI and its components were assessed with the use of the correlation test, using SPSS software. There was a total of 14902 incidences and 5832 death were recorded in Asian countries in 2012. Among the Asian countries, the five countries with the highest standardized incidence rates of testicular cancer were Israel, Georgia, Turkey, Lebanon and Kazakhstan and the five countries with the highest standardized mortality rates were Turkey, Georgia, Jordan, Cambodia and the Syrian Arab Republic. A positive correlation of 0.382 was observed between the standardized incidence rates of testicular cancer and the HDI (p=0.009). Also a negative correlation of 0.298 between the standardized mortality rate of testicular cancer and the Human Development Index was noted although this relation was statistically non-significant (p=0.052). There is a positive correlation between HDI and the standardized incidence rate of testicular cancer and negative correlation with standardized mortality rate.

The modifying influence of country development on the effect of individual educational attainment on self-rated health.

PubMed

van der Kooi, Anne L F; Stronks, Karien; Thompson, Caroline A; DerSarkissian, Maral; Arah, Onyebuchi A

2013-11-01

We investigated how much the Human Development Index (HDI), a global measure of development, modifies the effect of education on self-reported health. We analyzed cross-sectional World Health Survey data on 217,642 individuals from 49 countries, collected in 2002 to 2005, with random-intercept multilevel linear regression models. We observed greater positive associations between educational levels and self-reported good health with increasing HDI. The magnitude of this effect modification of the education-health relation tended to increase with educational attainment. For example, before adjustment for effect modification, at comparable HDI, on average, finishing primary school was associated with better general health (b = 1.49; 95% confidence interval [CI] = 1.18, 1.80). With adjustment for effect modification by HDI, the impact became 4.63 (95% CI = 3.63, 5.62) for every 0.1 increase in HDI. Among those who completed high school, these associations were, respectively, 5.59 (95% CI = 5.20, 5.98) and 9.95 (95% CI = 8.89, 11.00). The health benefits of educational attainment are greater in countries with greater human development. Health inequalities attributable to education are, therefore, larger in more developed countries.

Emerging correlations between measures of population well-being, suicide and homicide: a look at global and Australian data.

PubMed

Lee, Adrian Ys; Pridmore, Saxby

2014-04-01

Our aim was (1) to examine global and Australian data with a view to determining the presence of an inverse relationship between suicide and homicide rates, and (2) to examine global Human Development Index (HDI) values and suicide and homicide rates, with a view to determining any statistical relationship. Suicide and homicide rates and HDI values were available for 102 countries, and suicide and homicide rates were available for the states and territories of Australia. The three data sets had non-normal distributions, and the non-parametric Spearman's ρ was used for correlation statistics with α = 0.05. We found a weak, statistically significant inverse relationship between the suicide and homicide rates of 102 countries (ρ = -0.244, p = 0.014). No relationship was established for the Australian values, however. As anticipated, we found a significant negative correlation between homicide and HDI values. We unexpectedly demonstrated a positive correlation between suicide rates and HDI values. The notion that suicide and homicide have an inverse relationship now has some scientific support; but additional research is warranted to characterise and explain this relationship. The unexpected finding of a positive correlation between suicide rates and HDI values requires further examination.

Socioeconomic status is associated with global diabetes prevalence

PubMed Central

Xu, Zhiye; Yu, Dan; Yin, Xueyao; Zheng, Fenping; Li, Hong

2017-01-01

The incidence of diabetes is increasing globally. We investigated the relationship between diabetes prevalence and patient socioeconomic status across multiple countries. We searched PubMed to identify population-based surveys reporting diabetes prevalence between 1990 and May 2016. Search results were filtered, and Human Development Index (HDI) values from the United Nations Development Programme were used to assess socioeconomic status for a given nation. Our analysis included 45 national surveys from 32 countries. Diabetes prevalence was positively correlated with national HDI (r = 0.421 P = 0.041) in developing countries, and negatively correlated with HDI (r = −0.442 P = 0.045) in developed countries. Diabetes prevalence trends were the same in women and men, although men were associated with increased diabetes risk in developed countries (r = 0.459 P = 0.048). Thus, diabetes prevalence rises with increasing HDI in developing countries, and this is reversed in developed countries. Ours is the first study to investigate the relationship between diabetes and socioeconomic status at global level using HDI values. These results will aid in evaluating global diabetes prevalence and risk with respect to patient socioeconomic status, and will be useful in the development of policies that help reduce disease incidence. PMID:28574844

Socioeconomic status is associated with global diabetes prevalence.

PubMed

Xu, Zhiye; Yu, Dan; Yin, Xueyao; Zheng, Fenping; Li, Hong

2017-07-04

The incidence of diabetes is increasing globally. We investigated the relationship between diabetes prevalence and patient socioeconomic status across multiple countries. We searched PubMed to identify population-based surveys reporting diabetes prevalence between 1990 and May 2016. Search results were filtered, and Human Development Index (HDI) values from the United Nations Development Programme were used to assess socioeconomic status for a given nation. Our analysis included 45 national surveys from 32 countries. Diabetes prevalence was positively correlated with national HDI (r = 0.421 P = 0.041) in developing countries, and negatively correlated with HDI (r = -0.442 P = 0.045) in developed countries. Diabetes prevalence trends were the same in women and men, although men were associated with increased diabetes risk in developed countries (r = 0.459 P = 0.048). Thus, diabetes prevalence rises with increasing HDI in developing countries, and this is reversed in developed countries. Ours is the first study to investigate the relationship between diabetes and socioeconomic status at global level using HDI values. These results will aid in evaluating global diabetes prevalence and risk with respect to patient socioeconomic status, and will be useful in the development of policies that help reduce disease incidence.

Dynamic stability and slider-lubricant interactions in hard disk drives

NASA Astrophysics Data System (ADS)

Ambekar, Rohit Pradeep

2007-12-01

Hard disk drives (HDD) have played a significant role in the current information age and have become the backbone of storage. The soaring demand for mass data storage drives the necessity for increasing capacity of the drives and hence the areal density on the disks as well as the reliability of the HDD. To achieve greater areal density in hard disk drives, the flying height of the airbearing slider continually decreases. Different proximity forces and interactions influence the air bearing slider resulting in fly height modulation and instability. This poses several challenges to increasing the areal density (current goal is 2Tb/in.2) as well as making the head-disk interface (HDI) more reliable. Identifying and characterizing these forces or interactions has become important for achieving a stable fly height at proximity and realizing the goals of areal density and reliability. Several proximity forces or interactions influencing the slider are identified through the study of touchdown-takeoff hysteresis. Slider-lubricant interaction which causes meniscus force between the slider and disk as well as airbearing surface contamination seems to be the most important factor affecting stability and reliability at proximity. In addition, intermolecular forces and disk topography are identified as important factors. Disk-to-slider lubricant transfer leads to lubricant pickup on the slider and also causes depletion of lubricant on the disk, affecting stability and reliability of the HDI. Experimental and numerical investigation as well as a parametric study of the process of lubricant transfer has been done using a half-delubed disk. In the first part of this parametric study, dependence on the disk lubricant thickness, lubricant type and slider ABS design has been investigated. It is concluded that the lubricant transfer can occur without slider-disk contact and there can be more than one timescale associated with the transfer. Further, the transfer increases non-linearly with increasing disk lubricant thickness. Also, the transfer depends on the type of lubricant used, and is less for Ztetraol than for Zdol. The slider ABS design also plays an important role, and a few suggestions are made to improve the ABS design for better lubricant performance. In the second part of the parametric study, the effect of carbon overcoat, lubricant molecular weight and inclusion of X-1P and A20H on the slider-lubricant interactions is investigated using a half-delubed disk approach. Based on the results, it is concluded that there exists a critical head-disk clearance above which there is negligible slider-lubricant interaction. The interaction starts at this critical clearance and increases in intensity as the head-disk clearance is further decreased below the critical clearance. Using shear stress simulations and previously published work a theory is developed to support the experimental observations. The critical clearance depends on various HDI parameters and hence can be reduced through proper design of the interface. Comparison of critical clearance on CHx and CHxNy media indicates that presence of nitrogen is better for HDI as it reduces the critical clearance, which is found to increase with increasing lubricant molecular weight and in presence of additives X-1P and A20H. Further experiments maintaining a fixed slider-disk clearance suggest that two different mechanisms dominate the disk-to-slider and slider-to-disk lubricant transfer. One of the key factors influencing the slider stability at proximity is the disk topography, since it provides dynamic excitation to the low-flying sliders and strongly influences its dynamics. The effect of circumferential as well as radial disk topography is investigated using a new method to measure the 2-D (true) disk topography. Simulations using CMLAir dynamic simulator indicate a strong dependence on the circumferential roughness and waviness features as well as radial features, which have not been studied intensively till now. The simulations with 2-D disk topography are viewed as more realistic than the 1-D simulations. Further, it is also seen that the effect of the radial features can be reduced through effective ABS design. Finally, an attempt has been made to establish correlations between some of the proximity interactions as well as others which may affect the HDI reliability by creating a relational chart. Such an organization serves to give a bigger picture of the various efforts being made in the field of HDI reliability and link them together. From this chart, a causal relationship is suggested between the electrostatic, intermolecular and meniscus forces.

A human development framework for CO2 reductions.

PubMed

Costa, Luís; Rybski, Diego; Kropp, Jürgen P

2011-01-01

Although developing countries are called to participate in CO(2) emission reduction efforts to avoid dangerous climate change, the implications of proposed reduction schemes in human development standards of developing countries remain a matter of debate. We show the existence of a positive and time-dependent correlation between the Human Development Index (HDI) and per capita CO(2) emissions from fossil fuel combustion. Employing this empirical relation, extrapolating the HDI, and using three population scenarios, the cumulative CO(2) emissions necessary for developing countries to achieve particular HDI thresholds are assessed following a Development As Usual approach (DAU). If current demographic and development trends are maintained, we estimate that by 2050 around 85% of the world's population will live in countries with high HDI (above 0.8). In particular, 300 Gt of cumulative CO(2) emissions between 2000 and 2050 are estimated to be necessary for the development of 104 developing countries in the year 2000. This value represents between 20 % to 30 % of previously calculated CO(2) budgets limiting global warming to 2 °C. These constraints and results are incorporated into a CO(2) reduction framework involving four domains of climate action for individual countries. The framework reserves a fair emission path for developing countries to proceed with their development by indexing country-dependent reduction rates proportional to the HDI in order to preserve the 2 °C target after a particular development threshold is reached. For example, in each time step of five years, countries with an HDI of 0.85 would need to reduce their per capita emissions by approx. 17% and countries with an HDI of 0.9 by 33 %. Under this approach, global cumulative emissions by 2050 are estimated to range from 850 up to 1100 Gt of CO(2). These values are within the uncertainty range of emissions to limit global temperatures to 2 °C. © 2011 Costa et al.

The impact of human development on individual health: a causal mediation analysis examining pathways through education and body mass index.

PubMed

Wang, Aolin; Arah, Onyebuchi A

2017-01-01

The macro environment we live in projects what we can achieve and how we behave, and in turn, shapes our health in complex ways. Policymaking will benefit from insights into the mechanisms underlying how national socioeconomic context affects health. This study examined the impact of human development on individual health and the possible mediating roles of education and body mass index (BMI). We analyzed World Health Survey data on 109,448 participants aged 25 or older from 42 low- and middle-income countries with augmented human development index (HDI) in 1990. We used principal components method to create a health score based on measures from eight health state domains, used years of schooling as education indicator and calculated BMI from self-reported height and weight. We used causal mediation analysis technique with random intercepts to account for the multilevel structure. Below a reference HDI level of 0.48, HDI was negatively associated with good health (total effect at HDI of 0.23: b  =  - 3.44, 95% CI [-6.39--0.49] for males and b  =  - 5.16, 95% CI [-9.24,--1.08] for females) but was positively associated with good health above this reference level (total effect at HDI of 0.75: b  = 4.16, 95% CI [-0.33-8.66] for males and b  = 6.62, 95% CI [0.85-12.38] for females). We found a small positive effect of HDI on health via education across reference HDI levels ( b ranging from 0.24 to 0.29 for males and 0.40 to 0.49 for females) but not via pathways involving BMI only. Human development has a non-linear effect on individual health, but the impact appears to be mainly through pathways other than education and BMI.

A Human Development Framework for CO2 Reductions

PubMed Central

Costa, Luís; Rybski, Diego; Kropp, Jürgen P.

2011-01-01

Although developing countries are called to participate in CO2 emission reduction efforts to avoid dangerous climate change, the implications of proposed reduction schemes in human development standards of developing countries remain a matter of debate. We show the existence of a positive and time-dependent correlation between the Human Development Index (HDI) and per capita CO2 emissions from fossil fuel combustion. Employing this empirical relation, extrapolating the HDI, and using three population scenarios, the cumulative CO2 emissions necessary for developing countries to achieve particular HDI thresholds are assessed following a Development As Usual approach (DAU). If current demographic and development trends are maintained, we estimate that by 2050 around 85% of the world’s population will live in countries with high HDI (above 0.8). In particular, 300 Gt of cumulative CO2 emissions between 2000 and 2050 are estimated to be necessary for the development of 104 developing countries in the year 2000. This value represents between 20 % to 30 % of previously calculated CO2 budgets limiting global warming to 2°C. These constraints and results are incorporated into a CO2 reduction framework involving four domains of climate action for individual countries. The framework reserves a fair emission path for developing countries to proceed with their development by indexing country-dependent reduction rates proportional to the HDI in order to preserve the 2°C target after a particular development threshold is reached. For example, in each time step of five years, countries with an HDI of 0.85 would need to reduce their per capita emissions by approx. 17% and countries with an HDI of 0.9 by 33 %. Under this approach, global cumulative emissions by 2050 are estimated to range from 850 up to 1100 Gt of CO2. These values are within the uncertainty range of emissions to limit global temperatures to 2°C. PMID:22216227

The incidence and mortality of prostate cancer and its relationship with development in Asia

PubMed Central

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Pakzad, Iraj; Salehiniya, Hamid

2015-01-01

Purpose Prostate cancer is a common cancer in men in the world. It is rapidly increasing. This study investigated the incidence and mortality of prostate cancer and the relationship with the Human Development Index (HDI) and its dimensions in Asia in 2012. Methods The study was conducted based on data from the world data of cancer and the World Bank (including the HDI and its components). The standardized incidence and mortality rates of prostate cancer were calculated for Asian countries. The correlation between incidence, mortality rates, and the HDI and its components were assessed with the use of the correlation test, using SPSS software. Results There was a total of 191,054 incidences and 81,229 death were recorded in Asian countries in 2012. Among the Asian countries, the five countries with the highest standardized incidence rates of prostate cancer were Israel, Turkey, Lebanon, Singapore, and Japan, and the five countries with the highest standardized mortality rates were Turkey, Lebanon, Timor-Leste, Armenia, and the Philippines. The correlation between standardized incidence rate of prostate cancer and the HDI was 0.604 (P ≤ 0.001), with life expectancy at birth 0.529 (P = 0.002), with mean years of schooling 0.427 (P = 0.001), and with level of income per each person of the population 0.349 (P = 0.013). Also, between the standardized mortality rate and the HDI, it was 0.228 (P = 0.127). Conclusions A significant and positive correlation was observed between the standardized incidence rate of prostate cancer, and the HDI and its dimensions, such as life expectancy at birth, mean years of schooling, and income level of the population per each person of population. However, there was no significant correlation between the standardized mortality rate, and the HDI and its dimensions. PMID:26779461

The incidence and mortality of prostate cancer and its relationship with development in Asia.

PubMed

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Pakzad, Iraj; Salehiniya, Hamid

2015-12-01

Prostate cancer is a common cancer in men in the world. It is rapidly increasing. This study investigated the incidence and mortality of prostate cancer and the relationship with the Human Development Index (HDI) and its dimensions in Asia in 2012. The study was conducted based on data from the world data of cancer and the World Bank (including the HDI and its components). The standardized incidence and mortality rates of prostate cancer were calculated for Asian countries. The correlation between incidence, mortality rates, and the HDI and its components were assessed with the use of the correlation test, using SPSS software. There was a total of 191,054 incidences and 81,229 death were recorded in Asian countries in 2012. Among the Asian countries, the five countries with the highest standardized incidence rates of prostate cancer were Israel, Turkey, Lebanon, Singapore, and Japan, and the five countries with the highest standardized mortality rates were Turkey, Lebanon, Timor-Leste, Armenia, and the Philippines. The correlation between standardized incidence rate of prostate cancer and the HDI was 0.604 (P ≤ 0.001), with life expectancy at birth 0.529 (P = 0.002), with mean years of schooling 0.427 (P = 0.001), and with level of income per each person of the population 0.349 (P = 0.013). Also, between the standardized mortality rate and the HDI, it was 0.228 (P = 0.127). A significant and positive correlation was observed between the standardized incidence rate of prostate cancer, and the HDI and its dimensions, such as life expectancy at birth, mean years of schooling, and income level of the population per each person of population. However, there was no significant correlation between the standardized mortality rate, and the HDI and its dimensions.

Making and Using Aesthetically Pleasing Images With HDI

NASA Astrophysics Data System (ADS)

Buckner, Spencer L.

2017-01-01

The Half-Degree Imager (HDI) was installed as the primary imager on the 0.9-m WIYN telescope in October 2013. In the three plus years since then it has proven to be highly effective as a scientific instrument for the 0.9-m WIYN consortium. One thing that has been missing from the mix are aesthetically pleasing images for use in publicity and public outreach. The lack of “pretty pictures” is understandable since the HDI is designed for scientific use and observers are given limited telescope time. However, images which appeal to the general public can be an effective tool for public outreach, publicity and recruitment of students into astronomy programs. As a counter to the loss of limited telescope time an observer has, “pretty picture” images can be taken under less than desirable conditions when photometric studies would have limited usefulness. Astroimaging has become a popular pastime among both amateur and professional astronomers. At Austin Peay State University astrophotography is a popular course with non-science majors that wish to complete an astronomy minor as well as physics majors pursuing the astrophysics track. Images of a number of Messier objects have been taken with the HDI camera and are used to teach the basics of image calibration and processing for aesthetic value to students in the astrophotography class. Using HDI images with most image processing software commercially available to the public does present some problems, though. The extended FITS format of the images is not readable by most amateur image processing software and such software can also have problems recognizing the filter configurations of the HDI. Overcoming these issues and how the images are used in APSU courses, publicity and public outreach as well as finished pictures will be discussed in this presentation. A poster describing the processing techniques used will be displayed during the concurrent HDI poster session along with several poster-sized prints of images.

Hemoglobin adducts in workers exposed to 1,6-hexamethylene diisocyanate.

PubMed

Flack, Sheila L; Fent, Kenneth W; Gaines, Linda G T; Thomasen, Jennifer M; Whittaker, Stephen G; Ball, Louise M; Nylander-French, Leena A

2011-05-01

We investigated the utility of 1,6-hexamethylene diamine (HDA) hemoglobin adducts as biomarkers of exposure to 1,6-hexamethylene diisocyanate (HDI) monomer. Blood samples from 15 spray painters applying HDI-containing paint were analyzed for hemoglobin HDA (HDA-Hb) and N-acetyl-1,6-hexamethylene diamine (monoacetyl-HDA-Hb) by GC-MS. HDA-Hb was detected in the majority of workers (≤1.2-37 ng/g Hb), whereas monoacetyl-HDA-Hb was detected in one worker (0.06 ng/g Hb). The stronger, positive association between HDA-Hb and cumulative HDI exposure (r(2) = 0.3, p < 0.06) than same day exposure (p ≥ 0.13) indicates long-term elimination kinetics for HDA-Hb adducts. This association demonstrates the suitability of HDA-Hb adducts for further validation as a biomarker of HDI exposure.

Factors affecting variability in the urinary biomarker 1,6-hexamethylene diamine in workers exposed to 1,6-hexamethylene diisocyanate.

PubMed

Gaines, Linda G T; Fent, Kenneth W; Flack, Sheila L; Thomasen, Jennifer M; Whittaker, Stephen G; Nylander-French, Leena A

2011-01-01

Although urinary 1,6-hexamethylene diamine (HDA) is a useful biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI), a large degree of unexplained intra- and inter-individual variability exists between estimated HDI exposure and urine HDA levels. We investigated the effect of individual and workplace factors on urine HDA levels using quantitative dermal and inhalation exposure data derived from a survey of automotive spray painters exposed to HDI. Painters' dermal and breathing-zone HDI-exposures were monitored over an entire workday for up to three separate workdays, spaced approximately one month apart. One urine sample was collected before the start of work with HDI-containing paints, and multiple samples were collected throughout the workday. Using mixed effects multiple linear regression modeling, coverall use resulted in significantly lower HDA levels (p = 0.12), and weekday contributed to significant variability in HDA levels (p = 0.056). We also investigated differences in urine HDA levels stratified by dichotomous and classification covariates using analysis of variance. Use of coveralls (p = 0.05), respirator type worn (p = 0.06), smoker status (p = 0.12), paint-booth type (p = 0.02), and more than one painter at the shop (p = 0.10) were all found to significantly affect urine HDA levels adjusted for creatinine concentration. Coverall use remained significant (p = 0.10), even after adjusting for respirator type. These results indicate that the variation in urine HDA level is mainly due to workplace factors and that appropriate dermal and inhalation protection is required to prevent HDI exposure.

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories.

PubMed

Mirmohammadi, Mirtaghi; Hakimi Ibrahim, M; Ahmad, Anees; Kadir, Mohd Omar Abdul; Mohammadyan, M; Mirashrafi, S B

2010-06-01

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker's urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William's biological analysis method. The concentration of HDI into all air samples were more than 88 microg/m(3), and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers' urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.

The use of high-dose insulin therapy and intravenous lipid emulsion to treat severe, refractory diltiazem toxicosis in a dog.

PubMed

Maton, Barbara L; Simmonds, Erin E; Lee, Justine A; Alwood, Amy J

2013-01-01

To describe the novel use of high-dose insulin (HDI) therapy and intravenous lipid emulsion (ILE) to treat refractory, severe diltiazem toxicosis in a dog. A 4-year-old Pomeranian was presented for treatment 2.5 hours following ingestion of a diltiazem extended-release capsule. Toxic ingestion was calculated at a maximum exposure of 79 mg/kg, with a reported canine LD50 of 50 mg/kg. Clinical signs of progressive hypotension and severe bradycardia with atrial standstill were observed, which persisted despite treatment with atropine, calcium, glucagon, and dopamine. The novel use of HDI and ILE as part of therapy for diltiazem toxicosis resulted in clinical resolution of life-threatening signs. Within 1 hour of initiating HDI therapy, the clinical signs improved, and with continued treatment, the patient remained normotensive and survived to discharge. To the authors' knowledge, this is the first reported clinical case describing the use of both HDI and ILE therapy in the treatment of severe refractory diltiazem toxicosis in veterinary medicine. No significant adverse effects were observed from the treatment. In veterinary patients with severe refractory calcium channel blocker toxicosis, the use of HDI and ILE should be considered for life-threatening clinical signs. © Veterinary Emergency and Critical Care Society 2013.

ERalpha and ERbeta expression and transcriptional activity are differentially regulated by HDAC inhibitors

PubMed Central

Duong, Vanessa; Licznar, Anne; Margueron, Raphaël; Boulle, Nathalie; Busson, Muriel; Lacroix, Matthieu; Katzenellenbogen, Benita S.; Cavaillès, Vincent; Lazennec, Gwendal

2006-01-01

The proliferative action of ERα largely accounts for the carcinogenic activity of estrogens. By contrast, recent data show that ERβ displays tumor-suppressor properties, thus supporting the interest to identify compounds which could increase its activity. Here, we show that histone deacetylase inhibitors (HDI) up-regulated ERβ protein levels, whereas it decreased ERα expression. Part of this regulation took place at the mRNA level through a mechanism independent of de novo protein synthesis. In addition, we found that, in various cancer cells, the treatment with different HDI enhanced the ligand-dependent activity of ERβ more strongly than that of ERα. On the other hand, in MDA-MB231 and HeLa cells, the expression of ERs modified the transcriptional response to HDI. The use of deletion mutants of both receptors demonstrated that AF1 domain of the receptors was required. Finally, we show that ERβ expression led to a dramatic increased in the antiproliferative activity of HDI, which correlated with a modification of the transcription of genes involved in cell cycle control by HDI. Altogether, these data demonstrate that the interference of ERβ and HDAC on the control of transcription and cell proliferation constitute a promising approach for cancer therapy. PMID:16158045

Effort-reward imbalance at work, over-commitment personality and diet quality in Central and Eastern European populations.

PubMed

Chen, Sung-Wei; Peasey, Anne; Stefler, Denes; Malyutina, Sofia; Pajak, Andrzej; Kubinova, Ruzena; Chan, Jen-Hui; Bobak, Martin; Pikhart, Hynek

2016-04-14

The aims of this study were to investigate the associations between work stress defined by the effort-reward imbalance (ERI) model and diet quality and to examine the potential role of over-commitment (OC) personality in ERI-diet relationships. A cross-sectional study was conducted in random population samples of 6340 men and 5792 women (age 45-69 years) from the Czech Republic, Russia and Poland. Dietary data were collected using FFQ. The healthy diet indicator (HDI) was constructed using eight nutrient/food intakes (HDI components) to reflect the adherence to WHO dietary guideline. The extent of imbalance between effort and reward was measured by the effort:reward (ER) ratio; the effort score was the numerator and the reward score was multiplied by a factor adjusting for unequal number of items in the denominator. Logistic regression and linear regression were used to assess the associations between exposures (ER ratio and OC) and outcomes (HDI components and HDI) after adjustment for confounders and mediators. The results showed that high ER ratio and high OC were significantly associated with unhealthy diet quality. For a 1-SD increase in the ER ratio, HDI was reduced by 0·030 and 0·033 sd in men and women, and for a 1-SD increase in OC, HDI was decreased by 0·036 and 0·032 sd in men and women, respectively. The modifying role of OC in ERI-diet relationships was non-significant. To improve diet quality at workplace, a multiple-level approach combining organisational intervention for work stress and individual intervention for vulnerable personality is recommended.

Global incidence and mortality rates in pancreatic cancer and the association with the Human Development Index: decomposition approach.

PubMed

Veisani, Y; Jenabi, E; Khazaei, S; Nematollahi, Sh

2018-03-01

Pancreatic cancer has a lower morbidity yet higher case fatality rates (CFRs) compared with other gastrointestinal cancers. The effects of socio-economic components on pancreatic cancer rates have been acknowledged; however, the effects of the Human Development Index (HDI) inequality are not. In this study, we aimed to determine the contribution of important socio-economic components on pancreatic cancer rates using a decomposition approach. Global ecological study. Incidence and mortality rates of pancreatic cancer were obtained for 172 countries from GLOBOCAN and the United Nations Development Program. The World Bank database was also used to obtain the HDI and its gradient for 169 countries. Inequality in pancreatic cancer age-specific incidence and mortality rates was calculated according to the HDI using the concentration index (CI). We decomposed the CI to determine main contributors of the inequality. The CI for incidence and mortality of pancreatic cancer in both genders according to the HDI was 0.26 (95% confidence interval: 0.21-0.30) and 0.25 (95% confidence interval: 0.21-0.30), respectively, which indicated more concentrated inequality in advantaged countries. About 80% of the inequality sources were predicted by socio-economic component in both rates of pancreatic cancer. The main contributors to inequality were the mean years of schooling, life expectancy at birth, expected years of schooling, and urbanization. Global inequalities exist in pancreatic cancer incidence and mortality rates according to the HDI; in addition, inequality was more concentrated in countries with higher score of HDI. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Incidence and Mortality of Colorectal Cancer and Relationships with the Human Development Index across the World.

PubMed

Rafiemanesh, Hosein; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Sepehri, Zahra; Shamlou, Reza; Salehiniya, Hamid; Towhidi, Farhad; Makhsosi, Behnam Reza

2016-01-01

This study aimed to investigate the standardized incidence and mortality rate of colorectal cancer and its relationship with the human development index (HDI) across the world in 2012. This ecologic study was conducted for assessment of the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its components. Data for SIR and SMR for every country for the year 2012 were obtained from the global cancer project. We used a bivariate method for assessment of the correlation between SIR and SMR and HDI. Statistical significance was assumed at <0.05. Statistical analyses were performed using SPSS (Version 22.0, SPSS Inc.). Countries with the highest SIR of colorectal cancer in the world in 2012, were Republic of Korea, Slovakia, Hungary and countries with the highest SMR were Hungary, Croatia and Slovakia. The correlation between SIR of colorectal cancer and the HDI was 0.712 (P≤0.001), with life expectancy at birth 0.513 (P≤0.001), with mean years of schooling 0.641 (P≤0.001) and with level of income per each person of the population 0.514 (P=0.013). In addition, the correlation between SMR of colorectal cancer and the HDI was 0.628 (P≤0.001), with life expectancy at birth 0.469 (P≤0.001), with mean years of schooling 0.592 (P≤0.001) and with level of income per each person of the population 0.378 (P=0.013). The highest SIR and SMR of colorectal cancer was in the WHO Europe region. There was a positive correlation between HDI and SIR and SMR of colorectal cancer.

Incidence and Mortality of Bladder Cancer and their Relationship with Development in Asia.

PubMed

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Mohammadian, Mahdi; Pakzad, Iraj; Safiri, Saeid; Khazaei, Salman; Salehiniya, Hamid

2015-01-01

Over the past decade, bladder cancer was associated with a significant increase. Given the importance of the impact of socioeconomic status on the distribution of cancer incidence and mortality, and the need to information on these parameters for prevention planning, the aim of this study was to evaluate data for bladder cancer and their relationship with human development index (HDI) and its components in Asia in 2012. The study was conducted based on data from the world data of cancer and the World Bank (including the HDI and its components). The incidence and mortality rates were drawn for Asian countries. To analyze data, correlation tests between incidence and death rates, and HDI and its components were employed with a significance level of 0.05 using SPSS software. A total incidence of 696,231 cases (68.7% in males and 31.3% in females, sex ratio of 2.19:1) and 524,465 deaths (67.0% in men and 32.9% in women, sex ratio was 2.03:1) were recorded in Asian countries in 2012. Correlation between HDI and standardized incidence rate was 0.241 overall (p=0.106), 0.236 in men (p=0.114) and -0.250 in women (p=0.094). Also between HDI and standardized mortality rate 0.025 (p=0.871) in men 0.118 (p=0.903) and in women 0.014 (p=0.927). Bladder cancer incidence is higher in developed countries, but the rate is declining, and in less developed and developing countries it is growing. There was no statistically significant correlation between the standardized incidence rate of bladder cancer and the HDI and its dimensions in Asia, except for the level of education.

Sense and nonsense of logic-level optical interconnect: reflections on an experiment

NASA Astrophysics Data System (ADS)

Van Campenhout, Jan M.; Brunfaut, Marnik; Meeus, Wim; Dambre, Joni; De Wilde, Michiel

2001-12-01

Centimeter-range high-density optical interconnect between chips is coming into reach with current optical interconnect technology. Many theoretical studies have identified several good reasons why to use such types of interconnect as a replacement of various layers of the traditional electronic interconnect hierarchy. However, the true feasibility and usefulness of optical interconnects can only be established by actually building and evaluating them in a real system setting. This contribution reports on our experience in using short-range high-density optical inter-chip interconnects. It is based on the design and construction of a fully functional optoelectronic demonstrator system. We discuss the rationale for building the demonstrator in the first place, the implications of using many low-level optical interconnections in electronic systems, and the degree to which our expectations have been fulfilled by the demonstrator. The detailed description of the architecture, design and implementation of the demonstrator is not presented here, but can be found elsewhere in this issue.

Trends in frequency of type 2 diabetes in Mexico and its relationship to dietary patterns and contextual factors.

PubMed

Soto-Estrada, Guadalupe; Moreno Altamirano, Laura; García-García, Juan José; Ochoa Moreno, Iván; Silberman, Martín

To analyse the evolution of the frequency of type 2 diabetes (T2D) and its relationship to eating patterns in Mexico from 1961 to 2013, and the Gini coefficient, Human Development Index (HDI) and Gross Domestic Product (GDP). Mexico ranked sixth in world prevalence of diabetes in 2015 with an estimated 11.4 million Mexicans affected. Using data from the Balance Sheets Food published by the Food and Agriculture Organization of the United Nations (FAO), the means of apparent food consumption (kcal/person/day) were grouped by decades. Data for mortality rate for diabetes were obtained from 1990 until 2015. Spearman's correlation coefficient was calculated between the diabetes mellitus mortality rate and all food groups. Pearson's correlation explored the relationship between socio economic indicators and the prevalence of T2D diabetes. The mortality rate for T2D has increased over the last decades. An increase of 647.9kcal/person/day in apparent food consumption was observed. Cereal and legume consumption decreased, while apparent sugar, animal food and animal fat and vegetable oil consumption increased substantially. HDI and GDP showed a directly proportional relationship to diabetes. Spearman's correlation coefficient was statistically significant only for sugar. The Gini coefficient suggests that in lower inequalities there is an increased frequency of diabetes. The increase in the mortality rate of type 2 diabetes was constant during the study period, which coincides with the increase in energy density of Mexican eating patterns from 1961 to 2013. The higher the Gini coefficient, HDI and GDP, the higher the mortality observed for diabetes. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

IQ as moderator of terminal decline in perceptual and motor speed, spatial, and verbal ability: Testing the cognitive reserve hypothesis in a population-based sample followed from age 70 until death.

PubMed

Thorvaldsson, Valgeir; Skoog, Ingmar; Johansson, Boo

2017-03-01

Terminal decline (TD) refers to acceleration in within-person cognitive decline prior to death. The cognitive reserve hypothesis postulates that individuals with higher IQ are able to better tolerate age-related increase in brain pathologies. On average, they will exhibit a later onset of TD, but once they start to decline, their trajectory is steeper relative to those with lower IQ. We tested these predictions using data from initially nondemented individuals (n = 179) in the H70-study repeatedly measured at ages 70, 75, 79, 81, 85, 88, 90, 92, 95, 97, 99, and 100, or until death, on cognitive tests of perceptual-and-motor-speed and spatial and verbal ability. We quantified IQ using the Raven's Coloured Progressive Matrices (RCPM) test administrated at age 70. We fitted random change point TD models to the data, within a Bayesian framework, conditioned on IQ, age of death, education, and sex. In line with predictions, we found that 1 additional standard deviation on the IQ scale was associated with a delay in onset of TD by 1.87 (95% highest density interval [HDI; 0.20, 4.08]) years on speed, 1.96 (95% HDI [0.15, 3.54]) years on verbal ability, but only 0.88 (95% HDI [-0.93, 3.49]) year on spatial ability. Higher IQ was associated with steeper rate of decline within the TD phase on measures of speed and verbal ability, whereas results on spatial ability were nonconclusive. Our findings provide partial support for the cognitive reserve hypothesis and demonstrate that IQ can be a significant moderator of cognitive change trajectories in old age. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Global Incidence and Mortality Rates of Stomach Cancer and the Human Development Index: an Ecological Study.

PubMed

Khazaei, Salman; Rezaeian, Shahab; Soheylizad, Mokhtar; Khazaei, Somayeh; Biderafsh, Azam

2016-01-01

Stomach cancer (SC) is the second leading cause of cancer death with the rate of 10.4% in the world. The correlation between the incidence and mortality rates of SC and human development index (HDI) has not been globally determined. Therefore, this study aimed to determine the association between the incidence and mortality rates of SC and HDI in various regions. In this global ecological study, we used the data about the incidence and mortality rate of SC and HDI from the global cancer project and the United Nations Development Programme database, respectively. In 2012, SCs were estimated to have affected a total of 951,594 individuals (crude rate: 13.5 per 100,000 individuals) with a male/female ratio of 1.97, and caused 723,073 deaths worldwide (crude rate: 10.2 per 100,000 individuals). There was a positive correlation between the HDI and both incidence (r=0.28, <0.05) and mortality rates of SC (r=0.13, P = 0.1) in the world in 2012. The high incidence and mortality rates of SC in countries with high and very high HDI is remarkable which should be the top priority of interventions for global health policymakers. In addition, health programs should be provided to reduce the burden of this disease in the regions with high incidence and mortality rates of SC.

Lack of Any Relationship of Stomach Cancer Incidence and Mortality with Development in Asia.

PubMed

RaFiei, Elahe; Mohammadian-Hafshejani, Abdollah; Towhidi, Farhad; Makhsosi, Behnam Reza; Salehiniya, Hamid

2016-01-01

The aim of this study was to evaluate the incidence and mortality of stomach cancer, and its relationship with the Human Development Index (HDI) and its components in Asia in 2012. This ecological study was conducted based on GLOBOCAN project of WHO for Asian countries. We assessed the correlations between standardized incidence rates (SIR) and standardized mortality rates (SMR) of stomach cancer with HDI and its components using SPSS18. A total of 696,231 cases (68.7% in males and 31.3% in females, ratio of 2.19:1) and 524,465 deaths (67.1% in men and 33.0% in women, ratio 2.03:1) were included in 2012. Five countries with the highest SIR of stomach cancer were Republic Korea, Mongolia, Japan, China and Tajikistan. Five countries with the highest SMR of stomach cancer were Mongolia, Tajikistan, Kyrgyzstan, Kazakhstan and China. Correlation between HDI and SIR was 0.241 (p = 0.106), in men 0.236 (p = 0.114) and in women -0.250 (p = 0.094). Also between HDI and SMR -0.250 (p = 0.871) in men -0.018 (p = 0.903) and in women -0.014 (p = 0.927). No significant correlation was observed between the SIR of stomach cancer, and the HDI and its dimensions, such as life expectancy at birth, mean years of schooling, and income level of the population.

A Calibrated Index of Human Development

ERIC Educational Resources Information Center

Lind, Niels

2010-01-01

The weightings of the four component indicators of the UNDP's Human Development Index HDI appear to be arbitrary and have not been given justification. This paper develops a variant of the HDI, calculated to reflect peoples' revealed evaluations of education and the productivity of work. The resulting Calibrated human Development Index CDI has a…

"Healthy" Human Development Indices

ERIC Educational Resources Information Center

Engineer, Merwan; Roy, Nilanjana; Fink, Sari

2010-01-01

In the Human Development Index (HDI), life expectancy is the only indicator used in modeling the dimension "a long and healthy life". Whereas life expectancy is a direct measure of quantity of life, it is only an indirect measure of healthy years lived. In this paper we attempt to remedy this omission by introducing into the HDI the morbidity…

Dataset on the prevalence of tobacco smoking in men and women of selected countries whit difference human development.

PubMed

Riahi, Mina; Mohammadi, Ali Akbar; Rohani, Hosein; Bidkhori, Mohammad

2018-06-01

This study was conducted to investigate the effect of human development index (HDI) on tobacco smoking prevalence in men and women of countries which their data about tobacco smoking were available for 2015. Pearson's correlation coefficient and linear regression were used to investigate the association between HDI and all types of smoking, particularly cigarette. Daily smoking and current smoking were used as tobacco smoking indices. The information about prevalence of tobacco smoking and HDI was obtained from the World Health Organization (WHO) website and United Nations Development Programme (UNDP), respectively. The results showed that there is no statistically significant relationship between HDI and current tobacco smoking in men (B = -0.45_CI 95%: -29.97, 29.06). However, the same association was significant for women (B = 43.87, CI 95%: 24.97-62.78). The results indicated that women in developed countries are more at risk of health effects attributed to tobacco smoking. Countries should focus on socioeconomic factors to prevent the spread of risk factors for non-communicable diseases.

Temperature- and pH-responsive nanoparticles of biocompatible polyurethanes for doxorubicin delivery.

PubMed

Wang, Anning; Gao, Hui; Sun, Yanfang; Sun, Yu-long; Yang, Ying-Wei; Wu, Guolin; Wang, Yinong; Fan, Yunge; Ma, Jianbiao

2013-01-30

A series of temperature- and pH-responsive polyurethanes based on hexamethylene diisocyanate (HDI) and 4,4'-diphenylmethane diisocyanate (MDI) were synthesized by a coupling reaction with bis-1,4-(hydroxyethyl) piperazine (HEP), N-methyldiethanolamine (MDEA) and N-butyldiethanolamine (BDEA), respectively. The chemical structure, molecular weight, thermal property and crystallization properties were characterized by Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) spectroscopy. The resulting polyurethanes were then used to prepare nanoparticles either by direct dispersion method or dialysis method. Their pH and temperature responsibilities were evaluated by optical transmittance and size measurement in aqueous media. Interestingly, HDI-based and MDI-based polyurethanes exhibited different pH and temperature responsive properties. Nanoparticles based on HDI-HEP and HDI-MDEA were temperature-responsive, while MDI-based biomaterials were not. All of them showed pH-sensitive behavior. The possible responsive mechanism was investigated by (1)H NMR spectroscopy. The cytotoxicity of the polyurethanes was evaluated using methylthiazoletetrazolium (MTT) assay in vitro. It was shown that the HDI-based polyurethanes were non-toxic, and could be applied to doxorubicin (DOX) encapsulation. The experimental results indicated that DOX could be efficiently encapsulated into polyurethane nanoparticles and uptaken by Huh-7 cells. The loaded DOX molecules could be released from the drug-loaded polyurethane nanoparticles upon pH and temperature changes, responsively. Copyright © 2012 Elsevier B.V. All rights reserved.

Human development, poverty, health & nutrition situation in India.

PubMed

Antony, G M; Laxmaiah, A

2008-08-01

Human development index (HDI) is extensively used to measure the standard of living of a country. India made a study progress in the HDI value. Extreme poverty is concentrated in rural areas of northern States while income growth has been dynamic in southern States and urban areas. This study was undertaken to assess the trends in HDI, human poverty index (HPI) and incidence of poverty among Indian states, the socio-economic, health, and diet and nutritional indicators which determine the HDI, changes in protein and calorie adequacy status of rural population, and also trends in malnutrition among children in India. The variations in socio-economic, demographic and dietary indicators by grades of HDI were studied. The trends in poverty and nutrition were also studied. Univariate, bivariate and multivariate analysis were done to analyse data. While India's HDI value has improved over a time; our rank did not improve much compared to other developing countries. Human poverty has not reduced considerably as per the HPI values. The undernutrition among preschool children is still a major public health problem in India. The incidence of poverty at different levels of calorie requirement has not reduced in both rural and urban areas. The time trends in nutritional status of pre-school children showed that, even though, there is an improvement in stunting over the years, the trend in wasting and underweight has not improved much. Proper nutrition and health awareness are important to tackle the health hazards of developmental transition. Despite several national nutrition programmes in operation, we could not make a significant dent in the area of health and nutrition. The changing dietary practices of the urban population, especially the middle class, are of concern. Further studies are needed to measure the human development and poverty situation of different sections of the population in India using an index, which includes both income indicators and non income indicators.

Optimized spatial priorities for biodiversity conservation in China: a systematic conservation planning perspective.

PubMed

Wu, Ruidong; Long, Yongcheng; Malanson, George P; Garber, Paul A; Zhang, Shuang; Li, Diqiang; Zhao, Peng; Wang, Longzhu; Duo, Hairui

2014-01-01

By addressing several key features overlooked in previous studies, i.e. human disturbance, integration of ecosystem- and species-level conservation features, and principles of complementarity and representativeness, we present the first national-scale systematic conservation planning for China to determine the optimized spatial priorities for biodiversity conservation. We compiled a spatial database on the distributions of ecosystem- and species-level conservation features, and modeled a human disturbance index (HDI) by aggregating information using several socioeconomic proxies. We ran Marxan with two scenarios (HDI-ignored and HDI-considered) to investigate the effects of human disturbance, and explored the geographic patterns of the optimized spatial conservation priorities. Compared to when HDI was ignored, the HDI-considered scenario resulted in (1) a marked reduction (∼9%) in the total HDI score and a slight increase (∼7%) in the total area of the portfolio of priority units, (2) a significant increase (∼43%) in the total irreplaceable area and (3) more irreplaceable units being identified in almost all environmental zones and highly-disturbed provinces. Thus the inclusion of human disturbance is essential for cost-effective priority-setting. Attention should be targeted to the areas that are characterized as moderately-disturbed, <2,000 m in altitude, and/or intermediately- to extremely-rugged in terrain to identify potentially important regions for implementing cost-effective conservation. We delineated 23 primary large-scale priority areas that are significant for conserving China's biodiversity, but those isolated priority units in disturbed regions are in more urgent need of conservation actions so as to prevent immediate and severe biodiversity loss. This study presents a spatially optimized national-scale portfolio of conservation priorities--effectively representing the overall biodiversity of China while minimizing conflicts with economic development. Our results offer critical insights for current conservation and strategic land-use planning in China. The approach is transferable and easy to implement by end-users, and applicable for national- and local-scale systematic conservation prioritization practices.

Optimized Spatial Priorities for Biodiversity Conservation in China: A Systematic Conservation Planning Perspective

PubMed Central

Wu, Ruidong; Long, Yongcheng; Malanson, George P.; Garber, Paul A.; Zhang, Shuang; Li, Diqiang; Zhao, Peng; Wang, Longzhu; Duo, Hairui

2014-01-01

By addressing several key features overlooked in previous studies, i.e. human disturbance, integration of ecosystem- and species-level conservation features, and principles of complementarity and representativeness, we present the first national-scale systematic conservation planning for China to determine the optimized spatial priorities for biodiversity conservation. We compiled a spatial database on the distributions of ecosystem- and species-level conservation features, and modeled a human disturbance index (HDI) by aggregating information using several socioeconomic proxies. We ran Marxan with two scenarios (HDI-ignored and HDI-considered) to investigate the effects of human disturbance, and explored the geographic patterns of the optimized spatial conservation priorities. Compared to when HDI was ignored, the HDI-considered scenario resulted in (1) a marked reduction (∼9%) in the total HDI score and a slight increase (∼7%) in the total area of the portfolio of priority units, (2) a significant increase (∼43%) in the total irreplaceable area and (3) more irreplaceable units being identified in almost all environmental zones and highly-disturbed provinces. Thus the inclusion of human disturbance is essential for cost-effective priority-setting. Attention should be targeted to the areas that are characterized as moderately-disturbed, <2,000 m in altitude, and/or intermediately- to extremely-rugged in terrain to identify potentially important regions for implementing cost-effective conservation. We delineated 23 primary large-scale priority areas that are significant for conserving China's biodiversity, but those isolated priority units in disturbed regions are in more urgent need of conservation actions so as to prevent immediate and severe biodiversity loss. This study presents a spatially optimized national-scale portfolio of conservation priorities – effectively representing the overall biodiversity of China while minimizing conflicts with economic development. Our results offer critical insights for current conservation and strategic land-use planning in China. The approach is transferable and easy to implement by end-users, and applicable for national- and local-scale systematic conservation prioritization practices. PMID:25072933

Nanoscale modeling for ultrathin liquid films: Spreading and coupled layering

NASA Astrophysics Data System (ADS)

Phillips, David Michael

The hard disk drive (HDD) industry is currently experiencing a compound annual growth rate of 100% for the areal density. Current production drives have an areal density of 80 Gbit in-2, and drives with an areal density of 100 Gbit in-2 have been recently demonstrated. While much of this growth has been fueled by the development of new read/write heads, some of this gain was achieved by reducing the spacing between the heads and the magnetic media. This in turn reduces the spacing at the head-disk interface (HDI). The HDI in a HDD system consists of a slider, which contains the read/write heads, flying over the disk surface on an air bearing. The current designed separation distance, or fly height, is less than 10 nm. This spacing is expected to reduce to a mere 5 nm within the next few years. With the reduced fly height, intermittent contacts at the HDI become more probable. Only a thin lubricant film of perfluoropolyether (PFPE) and a sputtered carbon overcoat on the disk surface protect the slider and the stored data from mechanical and thermal damage. The PFPE film is quite thin, with a thickness of less than 2 nm or about a monolayer of molecules. During an HDI contact, the PFPE film is considered sacrificial and is often depleted in the contact area. In order to maintain adequate protection for the disk surface, PFPE molecules from the surrounding film must replenish the depleted area. This replenishment ability directly opposes the requirement that the PFPE film must not spin-off of the disk surface due to the disk rotation rate, which is as high as 10,000 RPM in current drives. To balance the PFPE films to sufficiently meet both requirements, HDD manufacturers functionalized the endgroups of the PFPE molecules to allow some portion of the lubricant film to reversibly bond with the disk overcoat. The result is a lubricant film that has a slower replenishment but does not spin-off. The work presented here focuses on the replenishment ability of thin films of liquid PFPE. The experimental analogue of replenishment is the one-dimensional spreading analysis. PFPEs with functional endgroups demonstrated coupled molecular layering and dewetting phenomena during the spreading analysis, while PFPEs with nonfunctional endgroups did not. All of the PFPE thin films spread via a diffusive process and had diffusion coefficients that depended on the local film thickness. A theoretical analysis is presented here for both the governing equation and the disjoining pressure driving force for the PFPE thin film spreading. For PFPEs with non-functional endgroups, a reasonable analysis is performed on the diffusion coefficient for two classes of film: submonolayer and multilayer. The diffusion coefficient of PFPEs with functional endgroups are qualitatively linked to the gradient of the film disjoining pressure. To augment this theory, both lattice-based and off-lattice Monte Carlo simulations are conducted for PFPE film models. The lattice-based model shows the existence of a critical functional endgroup interaction strength. It is also used to study the break-up of molecular layers for a spreading film via a fractal analysis. The off-lattice model is used to calculate the anisotropic pressure tensor for the model PFPE thin film and subsequently the film disjoining pressure. The model also qualitatively analyzes of the self diffusion in the film.

Negative and Positive Partial Mobility: A Study of the Relative Changes in Human Development

ERIC Educational Resources Information Center

Sengupta, Atanu; Ghosh, Abhijit

2010-01-01

In this paper, we have considered the issues concerning dynamic changes in HDI and its various components from a relative standpoint. The analysis of HDI mobility should entail directional movement introduced by Fields (in Distribution and development: a new look at the developing world. MIT Press, Cambridge, 2001). However, Fields' analysis was…

Keeping Things Simple: Why the Human Development Index Should Not Diverge from Its Equal Weights Assumption

ERIC Educational Resources Information Center

Stapleton, Lee M.; Garrod, Guy D.

2007-01-01

Using a range of statistical criteria rooted in Information Theory we show that there is little justification for relaxing the equal weights assumption underlying the United Nation's Human Development Index (HDI) even if the true HDI diverges significantly from this assumption. Put differently, the additional model complexity that unequal weights…

Housing Quality and Access to Material and Learning Resources within the Home Environment in Developing Countries

PubMed Central

Bradley, Robert H.; Putnick, Diane L.

2011-01-01

This study examined home environment conditions (housing quality, material resources, formal and informal learning materials) and their relations with the Human Development Index (HDI) in 28 developing countries. Home environment conditions in these countries varied widely. The quality of housing and availability of material resources at home were consistently tied to HDI; the availability of formal and informal learning materials little less so. Gross domestic product (GDP) tended to show a stronger independent relation with housing quality and material resources than life expectancy and education. Formal learning resources were independently related to the GDP and education indices, and informal learning resources were not independently related to any constituent indices of the overall HDI. PMID:22277008

Epidemics in interconnected small-world networks.

PubMed

Liu, Meng; Li, Daqing; Qin, Pengju; Liu, Chaoran; Wang, Huijuan; Wang, Feilong

2015-01-01

Networks can be used to describe the interconnections among individuals, which play an important role in the spread of disease. Although the small-world effect has been found to have a significant impact on epidemics in single networks, the small-world effect on epidemics in interconnected networks has rarely been considered. Here, we study the susceptible-infected-susceptible (SIS) model of epidemic spreading in a system comprising two interconnected small-world networks. We find that the epidemic threshold in such networks decreases when the rewiring probability of the component small-world networks increases. When the infection rate is low, the rewiring probability affects the global steady-state infection density, whereas when the infection rate is high, the infection density is insensitive to the rewiring probability. Moreover, epidemics in interconnected small-world networks are found to spread at different velocities that depend on the rewiring probability.

[Migrations in Latin American countries. Characteristics of the pediatric population].

PubMed

Vásquez-De Kartzow, Rodrigo; Castillo-Durán, Carlos; Lera M, Lydia

2015-01-01

Migration is a growing phenomenon among Latin American countries (LAC) as well as others; however, scarce information is available studying its impact on paediatric groups and its association with socioeconomic variables. To study the association among socioeconomic variables and the immigration rate of paediatric population in LAC. Official rates of migration of LAC were obtained from: International Organization for Migration, Pan American Health Organization, and United Nations Development Programme. Demographic and socioeconomic information was also obtained for: gross domestic product (GDP), human development index (HDI), Gini coefficient of inequality (GC), alphabetization rate for adults (AA), net migration rate (NMR), and immigration of children<15 years (IM15). Description, linear correlations and analysis of differences between groups of countries were assessed. The NMR was positive for Costa Rica, Panama, Venezuela, Chile and Argentina. No association among NMR and GDP, HDI, GC, AA was found. A correlation of IM15 was found with: GC (r=0.668, P=.01), with GDP (r=-0.720; P=.01), AA (r=-0.755; P=.01) and with HDI (r=-0.799; P=.01). Rate of IM15 was lower in LA countries with advanced/medium development (GDP>median) vs those with low development (Fisher, P<.0001). There is a direct inverse association between GDP per capita, HDI, AA and GC and the proportion of each country IN15. We did not observe an association between NMR and HDI, AA, and GC. The health impact of these migrations should be analysed. Copyright © 2015. Publicado por Elsevier España, S.L.U.

Epidemiology, incidence and mortality of lung cancer and their relationship with the development index in the world

PubMed Central

Rafiemanesh, Hosein; Mehtarpour, Mojtaba; Khani, Farah; Hesami, Sayed Mohammadali; Shamlou, Reza; Towhidi, Farhad; Makhsosi, Behnam Reza; Moini, Ali

2016-01-01

Background The highest incidence of lung cancer is seen in North America and the lowest incidence in central Africa. Socioeconomic factors of inequality reflect regional disparities in human development. Due to the importance of awareness about incidence and mortality of lung cancer in health programming and the possible role of the human development index (HDI), this study was done with the aim to investigate the epidemiology of lung cancer in the world and its relationship with HDI. Methods The study was conducted based on data from the world data of cancer and the World Bank (including the HDI and its components). Data about the age-specific incidence and mortality rate (ASR) for every country in 2012 were getting from the global cancer project. To analyze data, correlation tests between incidence and death rates, and HDI and its components were employed with a significance level of 0.05 using SPSS software. Results Lung cancer with standardized incidence rate (ASIR) and standardized mortality rate (ASMR), equal to 23.1 and 19.7 (in 100,000 people), respectively. The highest and lowest values of mortality incidence ratio (MIR) for lung cancer due to continents division were 0.93 and 0.71 for Eastern Africa and Australia/New Zealand, respectively. Univariate analysis showed significant relationship (P<0.0001) between ASIR and ASMR with life expectancy at birth and mean years of schooling. Conclusions The highest MIR for lung cancer was for medium human development countries. Linear regression analysis showed a reverse significant relationship between MIR and HDI. PMID:27293825

Epidemiology, incidence and mortality of lung cancer and their relationship with the development index in the world.

PubMed

Rafiemanesh, Hosein; Mehtarpour, Mojtaba; Khani, Farah; Hesami, Sayed Mohammadali; Shamlou, Reza; Towhidi, Farhad; Salehiniya, Hamid; Makhsosi, Behnam Reza; Moini, Ali

2016-06-01

The highest incidence of lung cancer is seen in North America and the lowest incidence in central Africa. Socioeconomic factors of inequality reflect regional disparities in human development. Due to the importance of awareness about incidence and mortality of lung cancer in health programming and the possible role of the human development index (HDI), this study was done with the aim to investigate the epidemiology of lung cancer in the world and its relationship with HDI. The study was conducted based on data from the world data of cancer and the World Bank (including the HDI and its components). Data about the age-specific incidence and mortality rate (ASR) for every country in 2012 were getting from the global cancer project. To analyze data, correlation tests between incidence and death rates, and HDI and its components were employed with a significance level of 0.05 using SPSS software. Lung cancer with standardized incidence rate (ASIR) and standardized mortality rate (ASMR), equal to 23.1 and 19.7 (in 100,000 people), respectively. The highest and lowest values of mortality incidence ratio (MIR) for lung cancer due to continents division were 0.93 and 0.71 for Eastern Africa and Australia/New Zealand, respectively. Univariate analysis showed significant relationship (P<0.0001) between ASIR and ASMR with life expectancy at birth and mean years of schooling. The highest MIR for lung cancer was for medium human development countries. Linear regression analysis showed a reverse significant relationship between MIR and HDI.

Population growth, human development, and deforestation in biodiversity hotspots.

PubMed

Jha, S; Bawa, K S

2006-06-01

Human population and development activities affect the rate of deforestation in biodiversity hotspots. We quantified the effect of human population growth and development on rates of deforestation and analyzed the relationship between these causal factors in the 1980s and 1990s. We compared the averages of population growth, human development index (HDI, which measures income, health, and education), and deforestation rate and computed correlations among these variables for countries that contain biodiversity hotspots. When population growth was high and HDI was low there was a high rate of deforestation, but when HDI was high, rate of deforestation was low, despite high population growth. The correlation among variables was significant for the 1990s but not for the 1980s. The relationship between population growth and HDI had a regional pattern that reflected the historical process of development. Based on the changes in HDI and deforestation rate over time, we identified two drivers of deforestation: policy choice and human-development constraints. Policy choices that disregard conservation may cause the loss of forests even in countries that are relatively developed. Lack of development in other countries, on the other hand, may increase the pressure on forests to meet the basic needs of the human population. Deforestation resulting from policy choices may be easier to fix than deforestation arising from human development constraints. To prevent deforestation in the countries that have such constraints, transfer of material and intellectual resources from developed countries may be needed. Popular interest in sustainable development in developed countries can facilitate the transfer of these resources.

The incidence and mortality of esophageal cancer and their relationship to development in Asia

PubMed Central

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Khosravi, Bahman; Soltani, Shahin; Pakzad, Iraj; Mohammadian, Mahdi; Momenimovahed, Zohre

2016-01-01

Background Esophageal cancer is the most common cancer in less developed countries. It is necessary to understand epidemiology of the cancer for planning. The aim of this study was to evaluate the incidence and mortality of esophageal cancer, and its relationship with Human Development Index (HDI) and its components in Asia in 2012. Methods This study was an Ecological study, which conducted based on GLOBOCAN project of WHO for Asian counters. We assess the correlation between standardized incidence rates (SIR) and standardized mortality rates (SMR) of esophageal cancer with HDI and its components with using of SPSS18. Results A total of 337,698 incidence (70.33% were males and 29.87% females. Sex ratio was 2.37) and 296,734 death (69.45% in men and 30.54% in women. The sex ratio was 2.27) esophageal cancer was recorded in Asian countries in 2012. Five countries with the highest SIR and SMR of esophageal cancer were Turkmenistan, Mongolia and Tajikistan, Bangladesh and China respectively. Correlation between HDI and SIR was −0.211 (P=0.159), in men −0.175 (P=0.244) and in women −0.231 (P=0.123). Also between HDI and SMR −0.250 (P=0.094) in men −0.226 (P=0.131) and in women −0.251 (P=0.037). Conclusions The incidence of esophageal cancer is more in less developed and developing countries. Statistically significant correlation was not found between standardized incidence and mortality rates of esophageal cancer, and HDI and its dimensions, except for life expectancy at birth. PMID:26889482

The incidence and mortality of esophageal cancer and their relationship to development in Asia.

PubMed

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Khosravi, Bahman; Soltani, Shahin; Pakzad, Iraj; Mohammadian, Mahdi; Salehiniya, Hamid; Momenimovahed, Zohre

2016-01-01

Esophageal cancer is the most common cancer in less developed countries. It is necessary to understand epidemiology of the cancer for planning. The aim of this study was to evaluate the incidence and mortality of esophageal cancer, and its relationship with Human Development Index (HDI) and its components in Asia in 2012. This study was an Ecological study, which conducted based on GLOBOCAN project of WHO for Asian counters. We assess the correlation between standardized incidence rates (SIR) and standardized mortality rates (SMR) of esophageal cancer with HDI and its components with using of SPSS18. A total of 337,698 incidence (70.33% were males and 29.87% females. Sex ratio was 2.37) and 296,734 death (69.45% in men and 30.54% in women. The sex ratio was 2.27) esophageal cancer was recorded in Asian countries in 2012. Five countries with the highest SIR and SMR of esophageal cancer were Turkmenistan, Mongolia and Tajikistan, Bangladesh and China respectively. Correlation between HDI and SIR was -0.211 (P=0.159), in men -0.175 (P=0.244) and in women -0.231 (P=0.123). Also between HDI and SMR -0.250 (P=0.094) in men -0.226 (P=0.131) and in women -0.251 (P=0.037). The incidence of esophageal cancer is more in less developed and developing countries. Statistically significant correlation was not found between standardized incidence and mortality rates of esophageal cancer, and HDI and its dimensions, except for life expectancy at birth.

Planar high density sodium battery

DOEpatents

Lemmon, John P.; Meinhardt, Kerry D.

2016-03-01

A method of making a molten sodium battery is disclosed. A first metallic interconnect frame having a first interconnect vent hole is provided. A second metallic interconnect frame having a second interconnect vent hole is also provided. An electrolyte plate having a cathode vent hole and an anode vent hole is interposed between the metallic interconnect frames. The metallic interconnect frames and the electrolyte plate are sealed thereby forming gaseous communication between an anode chamber through the anode vent hole and gaseous communication between a cathode chamber through the cathode vent hole.

Inequality in Human Development: An Empirical Assessment of 32 Countries

ERIC Educational Resources Information Center

Grimm, Michael; Harttgen, Kenneth; Klasen, Stephan; Misselhorn, Mark; Munzi, Teresa; Smeeding, Timothy

2010-01-01

One of the most frequent critiques of the HDI is that is does not take into account inequality within countries in its three dimensions. In this paper, we apply a simply approach to compute the three components and the overall HDI for quintiles of the income distribution. This allows a comparison of the level in human development of the poor with…

Mortality in Digestive Cancers, 2012: International Data and Data from Romania.

PubMed

Valean, Simona; Acalovschi, Monica; Diculescu, Mircea; Manuc, Mircea; Goldis, Adrian; Sfarti, Catalin; Trifan, Anca

2015-12-01

We aimed to compare the difference in case fatality rate between more developed and very high Human Development Index (HDI) regions, less developed and low HDI regions, and Romania. The incidence and mortality rates for digestive cancers were obtained from the IARC/WHO 2012 database. World mean mortality-to-incidence ratios registered the highest values in pancreatic cancer (0.97/0.94), and liver cancer (0.93/0.96) in males/females, respectively. The lowest values were recorded in colorectal cancer (0.48 in both sexes). Mortality-to-incidence ratios were generally higher in less developed areas, low HDI populations, and in Romania. The difference in case fatality rate between different areas showed higher variations for colorectal, gastric and gallbladder cancers, and smaller variations for esophageal, liver, and pancreatic cancers. In summary, mortality-to-incidence ratios of digestive cancers were high in 2012; higher values were registered in less developed and low HDI regions, and in Romania. Mortality-to-incidence ratios were similar in both sexes, even though the incidence was generally higher in men. Digestive cancer mortality variation suggests the necessity of finding better strategies for prevention, early diagnosis and treatment of digestive cancers.

From Politics to Parity: Using a Health Disparities Index to Guide Legislative Efforts for Health Equity

PubMed Central

Simpson, Sean L.; Hairston, Kristen G.

2011-01-01

Objectives. We created an index quantifying the longitudinal burden of racial health disparities by state and compared this index to variables to guide the construction of, and validate support for, legislative efforts aimed at eliminating health disparities. Methods. We evaluated 5 focus areas of greatest racial disparities in health from 1999 to 2005 and compiled state health disparities index (HDI) scores. We compared these scores with variables representing the purported social determinants of health. Results. Massachusetts (0.35), Oklahoma (0.35), and Washington (0.39) averaged the fewest disparities. Michigan (1.22), Wisconsin (1.32), and Illinois (1.50) averaged the greatest disparities. The statistical reference point for nationwide average racial disparities was 1.00. The longitudinal mixed model procedure yielded statistically significant correlations between HDI scores and Black state population percentage as well as with the racial gap in uninsured percentages. We noted a trend for HDI correlations with median household income ratios. Conclusions. On the basis of the HDI-established trends in the extent and distribution of racial health disparities, and their correlated social determinants of health, policymakers should consider incorporating this tool to advise future efforts in minority health legislation. PMID:21233445

Inequality in Human Development: An Empirical Assessment of 32 Countries

PubMed Central

Harttgen, Kenneth; Klasen, Stephan; Misselhorn, Mark; Munzi, Teresa; Smeeding, Timothy

2009-01-01

One of the most frequent critiques of the HDI is that is does not take into account inequality within countries in its three dimensions. In this paper, we apply a simply approach to compute the three components and the overall HDI for quintiles of the income distribution. This allows a comparison of the level in human development of the poor with the level of the non-poor within countries, but also across countries. This is an application of the method presented in Grimm et al. (World Development 36(12):2527–2546, 2008) to a sample of 21 low and middle income countries and 11 industrialized countries. In particular the inclusion of the industrialized countries, which were not included in the previous work, implies to deal with a number of additional challenges, which we outline in this paper. Our results show that inequality in human development within countries is high, both in developed and industrialized countries. In fact, the HDI of the lowest quintiles in industrialized countries is often below the HDI of the richest quintile in many middle income countries. We also find, however, a strong overall negative correlation between the level of human development and inequality in human development. PMID:20461123

Chip-package nano-structured copper and nickel interconnections with metallic and polymeric bonding interfaces

NASA Astrophysics Data System (ADS)

Aggarwal, Ankur

With the semiconductor industry racing toward a historic transition, nano chips with less than 45 nm features demand I/Os in excess of 20,000 that support computing speed in terabits per second, with multi-core processors aggregately providing highest bandwidth at lowest power. On the other hand, emerging mixed signal systems are driving the need for 3D packaging with embedded active components and ultra-short interconnections. Decreasing I/O pitch together with low cost, high electrical performance and high reliability are the key technological challenges identified by the 2005 International Technology Roadmap for Semiconductors (ITRS). Being able to provide several fold increase in the chip-to-package vertical interconnect density is essential for garnering the true benefits of nanotechnology that will utilize nano-scale devices. Electrical interconnections are multi-functional materials that must also be able to withstand complex, sustained and cyclic thermo-mechanical loads. In addition, the materials must be environmentally-friendly, corrosion resistant, thermally stable over a long time, and resistant to electro-migration. A major challenge is also to develop economic processes that can be integrated into back end of the wafer foundry, i.e. with wafer level packaging. Device-to-system board interconnections are typically accomplished today with either wire bonding or solders. Both of these are incremental and run into either electrical or mechanical barriers as they are extended to higher density of interconnections. Downscaling traditional solder bump interconnect will not satisfy the thermo-mechanical reliability requirements at very fine pitches of the order of 30 microns and less. Alternate interconnection approaches such as compliant interconnects typically require lengthy connections and are therefore limited in terms of electrical properties, although expected to meet the mechanical requirements. A novel chip-package interconnection technology is developed to address the IC packaging requirements beyond the ITRS projections and to introduce innovative design and fabrication concepts that will further advance the performance of the chip, the package, and the system board. The nano-structured interconnect technology simultaneously packages all the ICs intact in wafer form with quantum jump in the number of interconnections with the lowest electrical parasitics. The intrinsic properties of nano materials also enable several orders of magnitude higher interconnect densities with the best mechanical properties for the highest reliability and yet provide higher current and heat transfer densities. Nano-structured interconnects provides the ability to assemble the packaged parts on the system board without the use of underfill materials and to enable advanced analog/digital testing, reliability testing, and burn-in at wafer level. This thesis investigates the electrical and mechanical performance of nanostructured interconnections through modeling and test vehicle fabrication. The analytical models evaluate the performance improvements over solder and compliant interconnections. Test vehicles with nano-interconnections were fabricated using low cost electro-deposition techniques and assembled with various bonding interfaces. Interconnections were fabricated at 200 micron pitch to compare with the existing solder joints and at 50 micron pitch to demonstrate fabrication processes at fine pitches. Experimental and modeling results show that the proposed nano-interconnections could enhance the reliability and potentially meet all the system performance requirements for the emerging micro/nano-systems.

Inhalation exposure to isocyanates of car body repair shop workers and industrial spray painters.

PubMed

Pronk, Anjoeka; Tielemans, Erik; Skarping, Gunnar; Bobeldijk, Ivana; VAN Hemmen, Joop; Heederik, Dick; Preller, Liesbeth

2006-01-01

As part of a large-scale epidemiological study, occupational isocyanate exposure was assessed in spray-painting environments. The aim was to assess which compounds contribute to isocyanate exposure in car body repair shops and industrial painting companies, and to identify tasks with high risk of isocyanate exposure. Mainly personal task-based samples (n = 566) were collected from 24 car body repair shops and five industrial painting companies using impingers with DBA in toluene. Samples were analysed by LC-MS for isocyanate monomers, oligomers and products of thermal degradation. From the 23 analysed compounds, 20 were detected. Exploratory factor analysis resulted in a HDI, TDI and MDI factor with the thermal degradation products divided over the TDI and MDI factors. The HDI factor mainly consisted of HDI oligomers and was dominant in frequency and exposure levels in both industries. Spray painting of PU lacquers resulted in the highest exposures for the HDI factor (

Global Dental Research Productivity and Its Association With Human Development, Gross National Income, and Political Stability.

PubMed

Allareddy, Veerasathpurush; Allareddy, Veeratrishul; Rampa, Sankeerth; Nalliah, Romesh P; Elangovan, Satheesh

2015-09-01

The objective of this study is to examine the associations between country level factors (such as human development, economic productivity, and political stability) and their dental research productivity. This study is a cross-sectional analysis of bibliometric data from Scopus search engine. Human Development Index (HDI), Gross National Income per capita (GNI), and Failed State Index measures were the independent variables. Outcomes were "Total number of publications (articles or articles in press) in the field of dentistry" and "Total number of publications in the field of dentistry per million population." Non-parametric tests were used to examine the association between the independent and outcome variables. During the year 2013, a total of 11,952 dental research articles were published across the world. The top 5 publishing countries were United States, Brazil, India, Japan, and United Kingdom. "Very High" HDI countries had significantly higher number of total dental research articles and dental research articles per million population when compared to the "High HDI," "Medium HDI," and "Low HDI" countries (p < 0.0001). There was a significant linear relationship between the GNI quartile income levels and outcome metrics (p ≤ 0.007). Countries which were highly politically stable were associated with significantly higher dental research productivity (p < 0.0001). There appears to be a regional concentration of articles with just five countries contributing to over 50% of all articles. The human development and economic development of a country are linearly correlated with dental research productivity. Dental research productivity also increases with increasing political stability of a country. Copyright © 2015 Elsevier Inc. All rights reserved.

Phase II randomized trial comparing high-dose IFN-α2b with temozolomide plus cisplatin as systemic adjuvant therapy for resected mucosal melanoma.

PubMed

Lian, Bin; Si, Lu; Cui, Chuanliang; Chi, Zhihong; Sheng, Xinan; Mao, Lili; Li, Siming; Kong, Yan; Tang, Bixia; Guo, Jun

2013-08-15

Mucosal melanoma is rare and associated with extremely poor prognosis. However, standard adjuvant therapy for mucosal melanoma has not been established. We conducted a randomized phase II clinical trial in patients with resected mucosal melanoma to compare the efficacy and safety of high-dose IFN-α2b (HDI) and temozolomide-based chemotherapy as adjuvant therapy. Patients with mucosal melanoma in stage II/III after surgery were randomized into three groups: observation group (group A, surgery alone), HDI group (group B, treated with 15 × 10(6) U/m(2)/d IFN-α2b, followed by 9 × 10(6) U IFN-α2b), and temozolomide (200 mg/m(2)/d) plus cisplatin (75 mg/m(2)) group (group C). The endpoints were relapse-free survival (RFS), overall survival (OS), and toxicities. One hundred and eighty-nine patients were enrolled and finally analyzed. With a median follow-up of 26.8 months, the median RFS was 5.4, 9.4, and 20.8 months for group A, B, and C, respectively. Estimated median OS for group A, B, and C was 21.2, 40.4, and 48.7 months, respectively. Patients treated with temozolomide plus cisplatin showed significant improvements in RFS (P < 0.001) and OS (P < 0.01) than those treated with either HDI or surgery alone. Toxicities were generally mild to moderate. Both temozolomide-based chemotherapy and HDI are effective and safe as adjuvant therapies for resected mucosal melanoma as compared with observation alone. However, HDI tends to be less effective than temozolomide-based chemotherapy for patients with resected mucosal melanoma in respect to RFS. The temozolomide plus cisplatin regimen might be a better choice for patients with resected mucosal melanoma. ©2013 AACR.

Maternal life course socio-economic position and offspring body composition at birth in a multi-ethnic population.

PubMed

Sletner, Line; Jenum, Anne Karen; Mørkrid, Kjersti; Vangen, Siri; Holme, Ingar M; Birkeland, Kåre I; Nakstad, Britt

2014-09-01

Size and body composition at birth may affect long-term health. Mean birthweight and body composition differ between ethnic groups living in Europe. We wanted to explore if this relates to differences in socio-economic conditions in country of origin and over the maternal life course. This is a population-based cohort study of healthy pregnant women living in Oslo, Norway. Data on maternal early life and present socio-economic position (SEP) were collected in early gestation, and SEP scores were extracted through two separate principal components analyses. The associations between maternal present SEP and four different offspring anthropometric measures at birth were assessed separately, stratified by maternal early life SEP (dichotomised score) and Human Development Index (HDI, a country-level socio-economic indicator) in the country of origin [high HDI (Reference), n = 287 and low HDI, n = 250]. A strong positive association between maternal present SEP and offspring birthweight was observed if maternal early life SEP was high, but not if maternal early life SEP was low (P < 0.001 for the interaction term). This interactional effect was observed in both HDI groups. Maternal life course SEP affected offspring birthweight mainly through an effect on length and sum of skin folds. Offspring of mothers with origin from low HDI countries had smaller abdominal circumference, possibly indicating less fat-free mass, regardless of maternal life course SEP. Our results suggest that there are transgenerational effects of maternal past socio-economic conditions on offspring size and body composition at birth that modify the associations with present socio-economic factors. © 2014 John Wiley & Sons Ltd.

Country-Level Macroeconomic Indicators Predict Early Post-Allogeneic Hematopoietic Cell Transplantation Survival in Acute Lymphoblastic Leukemia: A CIBMTR Analysis.

PubMed

Wood, William A; Brazauskas, Ruta; Hu, Zhen-Huan; Abdel-Azim, Hisham; Ahmed, Ibrahim A; Aljurf, Mahmoud; Badawy, Sherif; Beitinjaneh, Amer; George, Biju; Buchbinder, David; Cerny, Jan; Dedeken, Laurence; Diaz, Miguel Angel; Freytes, Cesar O; Ganguly, Siddhartha; Gergis, Usama; Almaguer, David Gomez; Gupta, Ashish; Hale, Gregory; Hashmi, Shahrukh K; Inamoto, Yoshihiro; Kamble, Rammurti T; Adekola, Kehinde; Kindwall-Keller, Tamila; Knight, Jennifer; Kumar, Lalit; Kuwatsuka, Yachiyo; Law, Jason; Lazarus, Hillard M; LeMaistre, Charles; Olsson, Richard F; Pulsipher, Michael A; Savani, Bipin N; Schultz, Kirk R; Saad, Ayman A; Seftel, Matthew; Seo, Sachiko; Shea, Thomas C; Steinberg, Amir; Sullivan, Keith; Szwajcer, David; Wirk, Baldeep; Yared, Jean; Yong, Agnes; Dalal, Jignesh; Hahn, Theresa; Khera, Nandita; Bonfim, Carmem; Atsuta, Yoshiko; Saber, Wael

2018-03-19

For patients with acute lymphoblastic leukemia (ALL), allogeneic hematopoietic cell transplantation (alloHCT) offers a potential cure. Life-threatening complications can arise from alloHCT that require the application of sophisticated health care delivery. The impact of country-level economic conditions on post-transplantation outcomes is not known. Our objective was to assess whether these variables were associated with outcomes for patients transplanted for ALL. Using data from the Center for Blood and Marrow Transplant Research, we included 11,261 patients who received a first alloHCT for ALL from 303 centers across 38 countries between the years of 2005 and 2013. Cox regression models were constructed using the following macroeconomic indicators as main effects: Gross national income per capita, health expenditure per capita, and Human Development Index (HDI). The outcome was overall survival at 100 days following transplantation. In each model, transplants performed within lower resourced environments were associated with inferior overall survival. In the model with the HDI as the main effect, transplants performed in the lowest HDI quartile (n = 697) were associated with increased hazard for mortality (hazard ratio, 2.42; 95% confidence interval, 1.64 to 3.57; P < .001) in comparison with transplants performed in the countries with the highest HDI quartile. This translated into an 11% survival difference at 100 days (77% for lowest HDI quartile versus 88% for all other quartiles). Country-level macroeconomic indices were associated with lower survival at 100 days after alloHCT for ALL. The reasons for this disparity require further investigation. Copyright © 2018 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Impact of human development on safety consciousness in construction.

PubMed

Baradan, Selim; Dikmen, Seyyit Umit; Akboga Kale, Ozge

2018-05-03

The International Labour Organization (ILO) reports that the risk of fatal occupational injuries in developing countries is almost twice as high as in developed countries, indicating a potential relationship between the fatality rates and the development level. The human development index (HDI), based on life expectancy, knowledge level and purchasing power parity, endorsed by the United Nations Development Programme, is a widely accepted measure of the development level. This study investigates the relationship between the HDI and the fatality rates reported by the ILO. A 23-country data set is used to demonstrate the general trend of the relationship followed by country-specific analyses for Australia, Spain, Hungary and Turkey. The study conducted is limited to fatal occupational injuries in construction, where the accidents are notoriously high. The results demonstrate a statistically significant inverse relationship between the fatality rates and the HDI.

Housing quality and access to material and learning resources within the home environment in developing countries.

PubMed

Bradley, Robert H; Putnick, Diane L

2012-01-01

This study examined home environment conditions (housing quality, material resources, formal and informal learning materials) and their relations with the Human Development Index (HDI) in 28 developing countries. Home environment conditions in these countries varied widely. The quality of housing and availability of material resources at home were consistently tied to HDI; the availability of formal and informal learning materials a little less so. Gross domestic product (GDP) tended to show a stronger independent relation with housing quality and material resources than life expectancy and education. Formal learning resources were independently related to the GDP and education indices, and informal learning resources were not independently related to any constituent indices of the overall HDI. © 2012 The Authors. Child Development © 2012 Society for Research in Child Development, Inc.

Chemically interconnected light-weight 3D-carbon nanotube solid network

DOE PAGES

Ozden, Sehmus; Tsafack, Thierry; Owuor, Peter S.; ...

2017-03-31

Owing to the weak physical interactions such as van der Waals and π-π interactions, which hold nanotubes together in carbon nanotube (CNT) bulk structures, the tubes can easily slide on each other. In creating covalent interconnection between individual carbon nanotube (CNT) structures we saw remarkable improvements in the properties of their three-dimensional (3D) bulk structures. The creation of such nanoengineered 3D solid structures with improved properties and low-density remains one of the fundamental challenges in real-world applications. We also report the scalable synthesis of low-density 3D macroscopic structure made of covalently interconnected nanotubes using free-radical polymerization method after functionalized CNTsmore » with allylamine monomers. The resulted interconnected highly porous solid structure exhibits higher mechanical properties, larger surface area and greater porosity than non-crosslinked nanotube structures. To gain further insights into the deformation mechanisms of nanotubes, fully atomistic reactive molecular dynamics simulations are used. Here we demonstrate one such utility in CO 2 uptake, whose interconnected solid structure performed better than non-interconnected structures.« less

Ultra-precision fabrication of high density micro-optical backbone interconnections for data center and mobile application

NASA Astrophysics Data System (ADS)

Lohmann, U.; Jahns, J.; Wagner, T.; Werner, C.

2012-10-01

A microoptical 3D interconnection scheme and fabricated samples of this fiberoptical multi-channel interconnec- tion with an actual capacity of 144 channels were shown. Additionally the aspects of micrometer-fabrication of such microoptical interconnection modules in the view of alignment-tolerances were considered. For the realiza- tion of the interconnection schemes, the approach of planar-integrated free space optics (PIFSO) is used with its well known advantages. This approach offers the potential for complex interconnectivity, and yet compact size.

3D printed high density, reversible, chip-to-chip microfluidic interconnects.

PubMed

Gong, Hua; Woolley, Adam T; Nordin, Gregory P

2018-02-13

Our latest developments in miniaturizing 3D printed microfluidics [Gong et al., Lab Chip, 2016, 16, 2450; Gong et al., Lab Chip, 2017, 17, 2899] offer the opportunity to fabricate highly integrated chips that measure only a few mm on a side. For such small chips, an interconnection method is needed to provide the necessary world-to-chip reagent and pneumatic connections. In this paper, we introduce simple integrated microgaskets (SIMs) and controlled-compression integrated microgaskets (CCIMs) to connect a small device chip to a larger interface chip that implements world-to-chip connections. SIMs or CCIMs are directly 3D printed as part of the device chip, and therefore no additional materials or components are required to make the connection to the larger 3D printed interface chip. We demonstrate 121 chip-to-chip interconnections in an 11 × 11 array for both SIMs and CCIMs with an areal density of 53 interconnections per mm 2 and show that they withstand fluid pressures of 50 psi. We further demonstrate their reusability by testing the devices 100 times without seal failure. Scaling experiments show that 20 × 20 interconnection arrays are feasible and that the CCIM areal density can be increased to 88 interconnections per mm 2 . We then show the utility of spatially distributed discrete CCIMs by using an interconnection chip with 28 chip-to-world interconnects to test 45 3D printed valves in a 9 × 5 array. Each valve is only 300 μm in diameter (the smallest yet reported for 3D printed valves). Every row of 5 valves is tested to at least 10 000 actuations, with one row tested to 1 000 000 actuations. In all cases, there is no sign of valve failure, and the CCIM interconnections prove an effective means of using a single interface chip to test a series of valve array chips.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozden, Sehmus; Tsafack, Thierry; Owuor, Peter S.

Owing to the weak physical interactions such as van der Waals and π-π interactions, which hold nanotubes together in carbon nanotube (CNT) bulk structures, the tubes can easily slide on each other. In creating covalent interconnection between individual carbon nanotube (CNT) structures we saw remarkable improvements in the properties of their three-dimensional (3D) bulk structures. The creation of such nanoengineered 3D solid structures with improved properties and low-density remains one of the fundamental challenges in real-world applications. We also report the scalable synthesis of low-density 3D macroscopic structure made of covalently interconnected nanotubes using free-radical polymerization method after functionalized CNTsmore » with allylamine monomers. The resulted interconnected highly porous solid structure exhibits higher mechanical properties, larger surface area and greater porosity than non-crosslinked nanotube structures. To gain further insights into the deformation mechanisms of nanotubes, fully atomistic reactive molecular dynamics simulations are used. Here we demonstrate one such utility in CO 2 uptake, whose interconnected solid structure performed better than non-interconnected structures.« less

Effects of Youth Participation in Extra-Curricular Sport Programs on Perceived Self-Efficacy: A Multilevel Analysis.

PubMed

Reverdito, Riller S; Carvalho, Humberto M; Galatti, Larissa R; Scaglia, Alcides J; Gonçalves, Carlos E; Paes, Roberto R

2017-06-01

The present study examined extracurricular sport participation variables and developmental context in relationship to perceived self-efficacy among underserved adolescents. Participants ( n = 821, 13.6 ± 1.5 years) completed the Youth Experience in Sport questionnaire and General Self-Efficacy Scale. We used the Human Development Index (HDI) to characterize developmental contexts. Multilevel regression models were used to explore the relative contributions of age, sex, years of participation in extracurricular sport, HDI, and perceived positive experience in sport. Our results highlight that positive experience alone and in interaction with length of participation in the program fostered perceived self-efficacy. Participants from higher HDI contexts remained longer in the program. An implication of our research is that variables linked to positive sport experiences and perceived self-efficacy can be used as markers to evaluate the outcomes and impact of sport participation programs aimed at promoting positive youth development.

Trade-offs between lens complexity and real estate utilization in a free-space multichip global interconnection module.

PubMed

Milojkovic, Predrag; Christensen, Marc P; Haney, Michael W

2006-07-01

The FAST-Net (Free-space Accelerator for Switching Terabit Networks) concept uses an array of wide-field-of-view imaging lenses to realize a high-density shuffle interconnect pattern across an array of smart-pixel integrated circuits. To simplify the optics we evaluated the efficiency gained in replacing spherical surfaces with aspherical surfaces by exploiting the large disparity between narrow vertical cavity surface emitting laser (VCSEL) beams and the wide field of view of the imaging optics. We then analyzed trade-offs between lens complexity and chip real estate utilization and determined that there exists an optimal numerical aperture for VCSELs that maximizes their area density. The results provide a general framework for the design of wide-field-of-view free-space interconnection systems that incorporate high-density VCSEL arrays.

Impact of stillbirths on international comparisons of preterm birth rates: a secondary analysis of the WHO multi-country survey of Maternal and Newborn Health.

PubMed

Morisaki, N; Ganchimeg, T; Vogel, J P; Zeitlin, J; Cecatti, J G; Souza, J P; Pileggi Castro, C; Torloni, M R; Ota, E; Mori, R; Dolan, S M; Tough, S; Mittal, S; Bataglia, V; Yadamsuren, B; Kramer, M S

2017-08-01

To evaluate the extent to which stillbirths affect international comparisons of preterm birth rates in low- and middle-income countries. Secondary analysis of a multi-country cross-sectional study. 29 countries participating in the World Health Organization Multicountry Survey on Maternal and Newborn Health. 258 215 singleton deliveries in 286 hospitals. We describe how inclusion or exclusion of stillbirth affect rates of preterm births in 29 countries. Preterm delivery. In all countries, preterm birth rates were substantially lower when based on live births only, than when based on total births. However, the increase in preterm birth rates with inclusion of stillbirths was substantially higher in low Human Development Index (HDI) countries [median 18.2%, interquartile range (17.2-34.6%)] compared with medium (4.3%, 3.0-6.7%), and high-HDI countries (4.8%, 4.4-5.5%). Inclusion of stillbirths leads to higher estimates of preterm birth rate in all countries, with a disproportionately large effect in low-HDI countries. Preterm birth rates based on live births alone do not accurately reflect international disparities in perinatal health; thus improved registration and reporting of stillbirths are necessary. Inclusion of stillbirths increases preterm birth rates estimates, especially in low-HDI countries. © 2017 World Health Organization, licensed by John Wiley & Sons Ltd on behalf of Royal College of Obstetricians and Gynaecologists.

Management of pegylated interferon alpha toxicity in adjuvant therapy of melanoma.

PubMed

Daud, Adil; Soon, Christopher; Dummer, Reinhard; Eggermont, Alexander M M; Hwu, Wen-Jen; Grob, Jean Jacques; Garbe, Claus; Hauschild, Axel

2012-08-01

Both native IFNα2b and pegylated IFNα2b (PegIFNα2b) are approved for the adjuvant treatment of high-risk melanoma. This review compares the toxicity profiles of high-dose IFNα2b (HDI) and PegIFNα2b, and provides recommendations on the management of common PegIFNα2b-related toxicities, based on available clinical data and published literature. The toxicity profile of PegIFNα2b at the approved dose (6 μg/kg/week for 8 weeks then 3 μg/kg/week for up to 5 years) is qualitatively similar to HDI in melanoma. The most common adverse events (AEs) are fatigue, anorexia, hepatotoxicity, flu-like symptoms, injection site reactions and depression. However, fatigue and flu-like symptoms appear less severe with PegIFNα2b, and toxicity seems to occur earlier, whereas with HDI toxicity may increase with time. Most AEs can be managed effectively by dose modification and aggressive symptom control. Dosing to tolerance using a three-step dose reduction schedule to maintain an ECOG performance status of 0 - 1 may enable patients experiencing toxicity to remain on treatment; this can be applied readily in clinical practice. PegIFNα2b is therefore a valuable alternative option for adjuvant treatment in melanoma, with a toxicity profile similar to that of HDI overall but a more convenient administration schedule.

Histone deacetylase inhibitor treatment induces ‘BRCAness’ and synergistic lethality with PARP inhibitor and cisplatin against human triple negative breast cancer cells

PubMed Central

Ha, Kyungsoo; Bhaskara, Srividya; Cerchietti, Leandro; Devaraj, Santhana G. T.; Shah, Bhavin; Sharma, Sunil; Chang, Jenny C.; Melnick, Ari M.; Hiebert, Scott; Bhalla, Kapil N.

2014-01-01

There is an unmet need to develop new, more effective and safe therapies for the aggressive forms of triple negative breast cancers (TNBCs). While up to 20% of women under 50 years of age with TNBC harbor germline mutations in BRCA1, and these tumors are sensitive to treatment with poly(ADP) ribose polymerase inhibitors, a majority of TNBCs lack BRCA1 mutations or loss of expression. Findings presented here demonstrate that by attenuating the levels of DNA damage response and homologous recombination proteins, pan-histone deacetylase inhibitor (HDI) treatment induces ‘BRCAness’ and sensitizes TNBC cells lacking BRCA1 to lethal effects of PARP inhibitor or cisplatin. Treatment with HDI also induced hyperacetylation of nuclear hsp90. Similar effects were observed following shRNA-mediated depletion of HDAC3, confirming its role as the deacetylase for nuclear HSP90. Furthermore, cotreatment with HDI and ABT-888 induced significantly more DNA strand breaks than either agent alone, and synergistically induced apoptosis of TNBC cells. Notably, co-treatment with HDI and ABT-888 significantly reduced in vivo tumor growth and markedly improved the survival of mice bearing TNBC cell xenografts. These findings support the rationale to interrogate the clinical activity of this novel combination against human TNBC, irrespective of its expression of mutant BRCA1. PMID:25026298

Cytocompatibility and Mechanical Properties of Short Phosphate Glass Fibre Reinforced Polylactic Acid (PLA) Composites: Effect of Coupling Agent Mediated Interface

PubMed Central

Hasan, Muhammad Sami; Ahmed, Ifty; Parsons, Andrew; Walker, Gavin; Scotchford, Colin

2012-01-01

In this study three chemical agents Amino-propyl-triethoxy-silane (APS), sorbitol ended PLA oligomer (SPLA) and Hexamethylene diisocyanate (HDI) were identified to be used as coupling agents to react with the phosphate glass fibre (PGF) reinforcement and the polylactic acid (PLA) polymer matrix of the composite. Composites were prepared with short chopped strand fibres (l = 20 mm, ϕ = 20 µm) in a random arrangement within PLA matrix. Improved, initial composite flexural strength (~20 MPa) was observed for APS treated fibres, which was suggested to be due to enhanced bonding between the fibres and polymer matrix. Both APS and HDI treated fibres were suggested to be covalently linked with the PLA matrix. The hydrophobicity induced by these coupling agents (HDI, APS) helped to resist hydrolysis of the interface and thus retained their mechanical properties for an extended period of time as compared to non-treated control. Approximately 70% of initial strength and 65% of initial modulus was retained by HDI treated fibre composites in contrast to the control, where only ~50% of strength and modulus was retained after 28 days of immersion in PBS at 37 °C. All coupling agent treated and control composites demonstrated good cytocompatibility which was comparable to the tissue culture polystyrene (TCP) control, supporting the use of these materials as coupling agent’s within medical implant devices. PMID:24955744

Incidence and Mortality of Nasopharynx Cancer and Its Relationship With Human Development Index in the World in 2012

PubMed Central

Mahdavifar, Neda; Towhidi, Farhad; Makhsosi, Behnam Reza; Pakzad, Reza; Moini, Ali; Ahmadi, Abbas; Lotfi, Sarah; Salehiniya, Hamid

2016-01-01

Background One of the most common cancers in head and neck is nasopharynx. Knowledge about the incidence and mortality of this disease and its distribution in terms of geographical areas is necessary for further study, better planning and prevention. Therefore, this study aimed to determine the incidence and mortality of nasopharynx cancer and its relationship with human development index (HDI) in the world in 2012. Methods This study was an ecological study conducted based on GLOBOCAN project of World Health Organization (WHO) for the countries in world. The correlation between standardized incidence rates (SIRs) and standardized mortality rates (SMRs) of nasopharynx cancer with HDI and its components was assessed with correlation coefficient by using SPSS 15. Results In 2012, 86,691 nasopharynx cancer cases occurred in the world, so that 60,896 new cases were seen in men and 25,795 new cases in women (sex ratio = 2.36). SIR of the cancer was 1.2 per 100,000 (1.7 in men and 0.7 in women per 100,000) in the world. In 2012, 50,831 nasopharynx death cases occurred in the world, so that 35,756 death cases were seen in men and 15,075 death cases in women (sex ratio = 2.37). SIR of mortality from the cancer was 0.7 per 100,000 (0.7 in women and 1 in men per 100,000) in the world. The results of correlation analysis showed a negative correlation between the SIR and HDI (r = -0.037, P = 0.629), and also the results of correlation analysis showed a negative correlation between the SMR and HDI (r = -0.237, P = 0.002). Conclusion Nasopharyngeal cancer is native to Southeast Asia and the highest incidence and mortality were seen in countries with moderate and low HDI. It is suggested that studies are conducted on determining the causes of the cancer incidence and mortality in the world and the differences between various regions. PMID:28983375

Female labour force participation and suicide rates in the world.

PubMed

Chen, Ying-Yeh; Chen, Mengni; Lui, Carrie S M; Yip, Paul S F

2017-12-01

The current study aims to illustrate male to female suicide rate ratios in the world and explore the correlations between female labour force participation rates (FLPR) and suicide rates of both genders. Further, whether the relationship of FLPR and suicide rates vary according to the human capabilities of a given country are examined. Using suicide data obtained from the World Health Organization Statistical Information System, suicide gender ratios of 70 countries are illustrated. Based on the level of Human Development Index (HDI) and FLPR, the Bayesian Information Criteria (BIC) was used to determine the optimal number of clusters of those countries. Graphic illustrations of FLPR and gender-specific suicide rates, stratified by each cluster were presented, and Pearson's correlation coefficients calculated. Three clusters are identified, there was no correlation between FLPR and suicide rates in the first cluster where both the HDI and FLPR were the highest (Male: r = 0.29, P = 0.45; Female: r = 0.01, P = 0.97); whereas in Cluster 2, higher level of FLPR corresponded to lower suicide rates in both genders, although the statistical significance was only found in females (Male: r = -0.32, P = 0.15; Female: r = -0.48, P = 0.03). In Cluster 3 countries where HDI/FLPR were relatively lower, increased FLPR was associated with higher suicide rates for both genders (Male: r = 0.32, P = 0.04; Female: r = 0.32, P = 0.05). The relationship between egalitarian gender norms and suicide rates varies according to national context. A greater egalitarian gender norms may benefit both genders, but more so for women in countries equipped with better human capabilities. Although the beneficial effect may reach a plateau in countries with the highest HDI/FLPR; whereas in countries with relatively lower HDI/FLPR, increased FLPR were associated with higher suicide rates. Copyright © 2017 Elsevier Ltd. All rights reserved.

Indigenous well-being in four countries: an application of the UNDP'S human development index to indigenous peoples in Australia, Canada, New Zealand, and the United States.

PubMed

Cooke, Martin; Mitrou, Francis; Lawrence, David; Guimond, Eric; Beavon, Dan

2007-12-20

Canada, the United States, Australia, and New Zealand consistently place near the top of the United Nations Development Programme's Human Development Index (HDI) rankings, yet all have minority Indigenous populations with much poorer health and social conditions than non-Indigenous peoples. It is unclear just how the socioeconomic and health status of Indigenous peoples in these countries has changed in recent decades, and it remains generally unknown whether the overall conditions of Indigenous peoples are improving and whether the gaps between Indigenous peoples and other citizens have indeed narrowed. There is unsettling evidence that they may not have. It was the purpose of this study to determine how these gaps have narrowed or widened during the decade 1990 to 2000. Census data and life expectancy estimates from government sources were used to adapt the Human Development Index (HDI) to examine how the broad social, economic, and health status of Indigenous populations in these countries have changed since 1990. Three indices - life expectancy, educational attainment, and income - were combined into a single HDI measure. Between 1990 and 2000, the HDI scores of Indigenous peoples in North America and New Zealand improved at a faster rate than the general populations, closing the gap in human development. In Australia, the HDI scores of Indigenous peoples decreased while the general populations improved, widening the gap in human development. While these countries are considered to have high human development according to the UNDP, the Indigenous populations that reside within them have only medium levels of human development. The inconsistent progress in the health and well-being of Indigenous populations over time, and relative to non-Indigenous populations, points to the need for further efforts to improve the social, economic, and physical health of Indigenous peoples.

Thermal modeling of head disk interface system in heat assisted magnetic recording

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vemuri, Sesha Hari; Seung Chung, Pil; Jhon, Myung S., E-mail: mj3a@andrew.cmu.edu

2014-05-07

A thorough understanding of the temperature profiles introduced by the heat assisted magnetic recording is required to maintain the hotspot at the desired location on the disk with minimal heat damage to other components. Here, we implement a transient mesoscale modeling methodology termed lattice Boltzmann method (LBM) for phonons (which are primary carriers of energy) in the thermal modeling of the head disk interface (HDI) components, namely, carbon overcoat (COC). The LBM can provide more accurate results compared to conventional Fourier methodology by capturing the nanoscale phenomena due to ballistic heat transfer. We examine the in-plane and out-of-plane heat transfermore » in the COC via analyzing the temperature profiles with a continuously focused and pulsed laser beam on a moving disk. Larger in-plane hotspot widening is observed in continuously focused laser beam compared to a pulsed laser. A pulsed laser surface develops steeper temperature gradients compared to continuous hotspot. Furthermore, out-of-plane heat transfer from the COC to the media is enhanced with a continuous laser beam then a pulsed laser, while the temperature takes around 140 fs to reach the bottom surface of the COC. Our study can lead to a realistic thermal model describing novel HDI material design criteria for the next generation of hard disk drives with ultra high recording densities.« less

Optical interconnect technologies for high-bandwidth ICT systems

NASA Astrophysics Data System (ADS)

Chujo, Norio; Takai, Toshiaki; Mizushima, Akiko; Arimoto, Hideo; Matsuoka, Yasunobu; Yamashita, Hiroki; Matsushima, Naoki

2016-03-01

The bandwidth of information and communication technology (ICT) systems is increasing and is predicted to reach more than 10 Tb/s. However, an electrical interconnect cannot achieve such bandwidth because of its density limits. To solve this problem, we propose two types of high-density optical fiber wiring for backplanes and circuit boards such as interface boards and switch boards. One type uses routed ribbon fiber in a circuit board because it has the ability to be formed into complex shapes to avoid interfering with the LSI and electrical components on the board. The backplane is required to exhibit high density and flexibility, so the second type uses loose fiber. We developed a 9.6-Tb/s optical interconnect demonstration system using embedded optical modules, optical backplane, and optical connector in a network apparatus chassis. We achieved 25-Gb/s transmission between FPGAs via the optical backplane.

A 15-Year Time-series Study of Tooth Extraction in Brazil

PubMed Central

Cunha, Maria Aparecida Goncalves de Melo; Lino, Patrícia Azevedo; dos Santos, Thiago Rezende; Vasconcelos, Mara; Lucas, Simone Dutra; de Abreu, Mauro Henrique Nogueira Guimarães

2015-01-01

Abstract Tooth loss is considered to be a public health problem. Time-series studies that assess the influence of social conditions and access to health services on tooth loss are scarce. This study aimed to examine the time-series of permanent tooth extraction in Brazil between 1998 and 2012 and to compare these series in municipalities with different Human Development Index (HDI) scores and with different access to distinct primary and secondary care. The time-series study was performed between 1998 and 2012, using data from the Brazilian National Health Information System. Time-series study was performed between 1998 and 2012. Two annual rates of tooth extraction were calculated and evaluated separately according to 3 parameters: the HDI, the presence of a Dental Specialty Center, and coverage by Oral Health Teams. The time-series was analyzed using a linear regression model. An overall decrease in the tooth-loss tendencies during this period was observed, particularly in the tooth-extraction rate during primary care procedures. In the municipalities with an HDI that was lower than the median, the average tooth-loss rates were higher than in the municipalities with a higher HDI. The municipalities with lower rates of Oral Health Team coverage also showed lower extraction rates than the municipalities with higher coverage rates. In general, Brazil has shown a decrease in the trend to extract permanent teeth during these 15 years. Increased human development and access to dental services have influenced tooth-extraction rates. PMID:26632688

[Secular trend of growth in stature in Florianópolis in the state of Santa Catarina (Brazil) in relation with the human development index (HDI)].

PubMed

Pinheiro, Andressa Caroline Carneiro; Niederauer, Juliana Minuzzi; Vargas, Deisi Maria

2014-01-01

The article seks to evaluate the secular trend of growth in stature of recruits in the 63rd Infantry Battalion in Florianópolis and correlate the information with the human development index (HDI). It involves a transversal and retrospective study of recruits aged between 18 and 20 who joined the 63rd IB in Florianópolis from 1963 to 2007. The sample comprised 600 individuals out of a total of 3000 recruits enlisted over the period. In each decade, three years were selected and within these years the first 40 files were systematically selected for analysis. It was seen that there was an increase in the order of 7 cm in height of recruits in Florianopolis over the past 47 years. This increase was more marked between the decades of 1990 and 2000, with the municipality of Blumenau having the highest average. The average heights study over the decades showed a strong positive correlation with the HDI of Florianopolis during the same period. When comparing the heights of the capital of Santa Catarina and previous studies in Blumenau, it was found that both cities have achieved the same increase of 1.4 cm/decade in the period between the 1960 and 2000. There was a positive secular trend in growth in Florianopolis, with a strong correlation with HDI values of the city between 1960 and 2000.

Immunological evaluation of four arc welders exposed to fumes from ignited polyurethane (isocyanate) foam: antibodies and immune profiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broughton, A.; Thrasher, J.D.; Gard, Z.

1988-01-01

Four arc welders having a flu-like illness with multiple health complaints following an exposure to high concentrations of isocyanate fumes from ignited polyurethane foam underwent immunological tests as follows: ELISA antibody assays, activated lymphocyte profiles, and lymphocyte blastogenesis. ELISA procedures revealed the presence of antibodies to hexamethylene diisocyanate (HDI) and formaldehyde (F) conjugated to human serum albumin (HDI-SA and F-SA). The results from the activated lymphocyte profiles showed deviations from the norm as follows: three welders had elevated helper/suppressor (H/S) ratios; all four had elevated percentages of Tal positive cells; two had decreases in B cells; and one had lowmore » total white cell and lymphocyte counts. In contrast, the percentage and absolute numbers of ILS receptor cells were normal in the four subjects. T cell blastogenesis to PHA, Con A and PWM resulted in the following: T-cells from one subject responded normally; in another, a high response (212% of controls) to PHA occurred with normal mitogenesis to Con A and PWM. In the remaining two welders, the T cells responded abnormally low (50 to 75% of controls) to the three mitogens. In conclusion, the existence of IgG antibodies to HDI-SA and F-SA, the altered activated immune profiles, the elevated Tal cells, and the abnormal blastogenesis are interpreted as being linked with the episode of HDI and F exposure and the subsequent flu-like illness of the four welders.« less

SOS response activation and competence development are antagonistic mechanisms in Streptococcus thermophilus.

PubMed

Boutry, Céline; Delplace, Brigitte; Clippe, André; Fontaine, Laetitia; Hols, Pascal

2013-02-01

Streptococcus includes species that either contain or lack the LexA-like repressor (HdiR) of the classical SOS response. In Streptococcus pneumoniae, a species which belongs to the latter group, SOS response inducers (e.g., mitomycin C [Mc] and fluoroquinolones) were shown to induce natural transformation, leading to the hypothesis that DNA damage-induced competence could contribute to genomic plasticity and stress resistance. Using reporter strains and microarray experiments, we investigated the impact of the SOS response inducers mitomycin C and norfloxacin and the role of HdiR on competence development in Streptococcus thermophilus. We show that both the addition of SOS response inducers and HdiR inactivation have a dual effect, i.e., induction of the expression of SOS genes and reduction of transformability. Reduction of transformability results from two different mechanisms, since HdiR inactivation has no major effect on the expression of competence (com) genes, while mitomycin C downregulates the expression of early and late com genes in a dose-dependent manner. The downregulation of com genes by mitomycin C was shown to take place at the level of the activation of the ComRS signaling system by an unknown mechanism. Conversely, we show that a ComX-deficient strain is more resistant to mitomycin C and norfloxacin in a viability plate assay, which indicates that competence development negatively affects the resistance of S. thermophilus to DNA-damaging agents. Altogether, our results strongly suggest that SOS response activation and competence development are antagonistic processes in S. thermophilus.

TCAD Analysis of Heating and Maximum Current Density in Carbon Nanofiber Interconnects

DTIC Science & Technology

2011-09-01

a metallic MWCNT interconnect. From [20]. ....20  Figure 11.  Simple equivalent circuit model of a metallic MWCNT interconnect. From [20...Carbon Nanotube MWCNT Multi-Walled Carbon Nanotube SCU Santa Clara University Si Silicon SiO2 Silicon Dioxide SiC Silicon Carbide Au Gold...proven, multi-walled carbon nanotube ( MWCNT ) [2]. He later discovered single-walled carbon nanotubes (SWCNT) in 1993 [13]. Since Iijima’s discovery

What is the connection between true and false memories? The differential roles of interitem associations in recall and recognition.

PubMed

McEvoy, C L; Nelson, D L; Komatsu, T

1999-09-01

Veridical memory for presented list words and false memory for nonpresented but related items were tested using the Deese/Roediger and McDermott paradigm. The strength and density of preexisting connections among the list words, and from the list words to the critical items, were manipulated. The likelihood of producing false memories in free recall varied with the strength of connections from the list words to the critical items but was inversely related to the density of the interconnections among the list words. In contrast, veridical recall of list words was positively related to the density of the interconnections. A final recognition test showed that both false and veridical memories were more likely when the list words were more densely interconnected. The results are discussed in terms of an associative model of memory, Processing Implicit and Explicit Representations (PIER 2) that describes the influence of implicitly activated preexisting information on memory performance.

“Pretty Pictures” with the HDI

NASA Astrophysics Data System (ADS)

Buckner, Spencer L.

2017-01-01

The Half-Degree Imager (HDI) has been in use on the 0.9-m WIYN telescope since October 2013. The instrument has well served the consortium as evidenced by the posters in this session and presentations at the concurrent special session held at this meeting. One thing that has been missing from the mix are aesthetically pleasing images for use in publicity and public outreach. Making “pretty pictures” with a scientific instrument such as HDI presents a number of challenges and opportunities. The chief challenge is finding the time to do the basic imaging given the limited telescope time available to users. Most users are understandably reluctant to take time away from imaging for their scientific research to take images whose primary purpose is to make a pretty picture. Fortunately, imaging of some objects to make pretty pictures can be done under sky conditions that are less than ideal when photometric studies would have limited usefulness. Another challenge is the raw HDI images must be converted from an extended FITS format into a normal FITS and a filter line added to the header to make the images usable by most commercially available image processing software. On the plus side, pretty picture images can serve to inspire prospective students into astronomy. Austin Peay State University has a popular astrophotography class that makes use of images taken with the HDI camera to introduce students to basic image processing techniques. The course is taken by both physics majors on the astrophysics track and non-science majors completing the astronomy minor. Pretty pictures can also be used as a recruitment tool to bring students into astronomy. APSU houses physics, biology, chemistry, agriculture and medical technology in the same building and displaying astronomical pictures at strategic locations around the building serves to recruit non-science majors to take more astronomy courses. Finally, the images can be used in publicity and outreach efforts by the university. This poster presents some of the techniques used in processing the images tor aesthetic value and how those images are used in recruitment, publicity and outreach. Several of the finished images in poster-sized prints will be available for viewing.

LTCC interconnects in microsystems

NASA Astrophysics Data System (ADS)

Rusu, Cristina; Persson, Katrin; Ottosson, Britta; Billger, Dag

2006-06-01

Different microelectromechanical system (MEMS) packaging strategies towards high packaging density of MEMS devices and lower expenditure exist both in the market and in research. For example, electrical interconnections and low stress wafer level packaging are essential for improving device performance. Hybrid integration of low temperature co-fired ceramics (LTCC) with Si can be a way for an easier packaging system with integrated electrical interconnection, and as well towards lower costs. Our research on LTCC-Si integration is reported in this paper.

White beam analysis of coupling between precipitation and plasticdeformation during electromigration in a passivated Al(0.5wt. percent Cu)interconnect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barabash, R.I.; Ice, G.E.; Tamura, N.

2005-09-01

The scaling of device dimensions with a simultaneous increase in functional density imposes a challenge to materials technology and reliability of interconnects. White beam X-ray microdiffraction is particularly well suited for the in situ study of electromigration. M.A. Krivoglaz theory was applied for the interpretation of white beam diffraction. The technique was used to probe microstructure in interconnects and has recently been able to monitor the onset of plastic deformation induced by mass transport during electromigration in Al(Cu) lines even before any macroscopic damage became visible. In the present paper, we demonstrate that the evolution of the dislocation structure duringmore » electromigration is highly inhomogeneous and results in the formation of unpaired randomly distributed geometrically necessary dislocations as well as geometrically necessary dislocation boundaries. When almost all unpaired dislocations and dislocation walls with the density n+ are parallel (as in the case of Al-based interconnects), the anisotropy in the scattering properties of the material becomes important, and the electrical properties of the interconnect depend strongly on the direction of the electric current relative to the orientation of the dislocation network. A coupling between the dissolution, growth and reprecipitation of Al2Cu precipitates and the electromigration-induced plastic deformation of grains in interconnects is observed.« less

Quantification and Statistical Modeling—Part I: Breathing-Zone Concentrations of Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate

PubMed Central

Fent, Kenneth W.; Gaines, Linda G. Trelles; Thomasen, Jennifer M.; Flack, Sheila L.; Ding, Kai; Herring, Amy H.; Whittaker, Stephen G.; Nylander-French, Leena A.

2009-01-01

We conducted a repeated exposure-assessment survey for task-based breathing-zone concentrations (BZCs) of monomeric and polymeric 1,6-hexamethylene diisocyanate (HDI) during spray painting on 47 automotive spray painters from North Carolina and Washington State. We report here the use of linear mixed modeling to identify the primary determinants of the measured BZCs. Both one-stage (N = 98 paint tasks) and two-stage (N = 198 paint tasks) filter sampling was used to measure concentrations of HDI, uretidone, biuret, and isocyanurate. The geometric mean (GM) level of isocyanurate (1410 μg m−3) was higher than all other analytes (i.e. GM < 7.85 μg m−3). The mixed models were unique to each analyte and included factors such as analyte-specific paint concentration, airflow in the paint booth, and sampler type. The effect of sampler type was corroborated by side-by-side one- and two-stage personal air sampling (N = 16 paint tasks). According to paired t-tests, significantly higher concentrations of HDI (P = 0.0363) and isocyanurate (P = 0.0035) were measured using one-stage samplers. Marginal R2 statistics were calculated for each model; significant fixed effects were able to describe 25, 52, 54, and 20% of the variability in BZCs of HDI, uretidone, biuret, and isocyanurate, respectively. Mixed models developed in this study characterize the processes governing individual polyisocyanate BZCs. In addition, the mixed models identify ways to reduce polyisocyanate BZCs and, hence, protect painters from potential adverse health effects. PMID:19622637

Adherence to a Healthy Diet According to the World Health Organization Guidelines and All-Cause Mortality in Elderly Adults From Europe and the United States

PubMed Central

Jankovic, Nicole; Geelen, Anouk; Streppel, Martinette T.; de Groot, Lisette C. P. G. M.; Orfanos, Philippos; van den Hooven, Edith H.; Pikhart, Hynek; Boffetta, Paolo; Trichopoulou, Antonia; Bobak, Martin; Bueno-de-Mesquita, H. B.; Kee, Frank; Franco, Oscar H.; Park, Yikyung; Hallmans, Göran; Tjønneland, Anne; May, Anne M.; Pajak, Andrzej; Malyutina, Sofia; Kubinova, Růžena; Amiano, Pilar; Kampman, Ellen; Feskens, Edith J.

2014-01-01

The World Health Organization (WHO) has formulated guidelines for a healthy diet to prevent chronic diseases and postpone death worldwide. Our objective was to investigate the association between the WHO guidelines, measured using the Healthy Diet Indicator (HDI), and all-cause mortality in elderly men and women from Europe and the United States. We analyzed data from 396,391 participants (42% women) in 11 prospective cohort studies who were 60 years of age or older at enrollment (in 1988–2005). HDI scores were based on 6 nutrients and 1 food group and ranged from 0 (least healthy diet) to 70 (healthiest diet). Adjusted cohort-specific hazard ratios were derived by using Cox proportional hazards regression and subsequently pooled using random-effects meta-analysis. During 4,497,957 person-years of follow-up, 84,978 deaths occurred. Median HDI scores ranged from 40 to 54 points across cohorts. For a 10-point increase in HDI score (representing adherence to an additional WHO guideline), the pooled adjusted hazard ratios were 0.90 (95% confidence interval (CI): 0.87, 0.93) for men and women combined, 0.89 (95% CI: 0.85, 0.92) for men, and 0.90 (95% CI: 0.85, 0.95) for women. These estimates translate to an increased life expectancy of 2 years at the age of 60 years. Greater adherence to the WHO guidelines is associated with greater longevity in elderly men and women in Europe and the United States. PMID:25318818

Advances in development reverse fertility declines.

PubMed

Myrskylä, Mikko; Kohler, Hans-Peter; Billari, Francesco C

2009-08-06

During the twentieth century, the global population has gone through unprecedented increases in economic and social development that coincided with substantial declines in human fertility and population growth rates. The negative association of fertility with economic and social development has therefore become one of the most solidly established and generally accepted empirical regularities in the social sciences. As a result of this close connection between development and fertility decline, more than half of the global population now lives in regions with below-replacement fertility (less than 2.1 children per woman). In many highly developed countries, the trend towards low fertility has also been deemed irreversible. Rapid population ageing, and in some cases the prospect of significant population decline, have therefore become a central socioeconomic concern and policy challenge. Here we show, using new cross-sectional and longitudinal analyses of the total fertility rate and the human development index (HDI), a fundamental change in the well-established negative relationship between fertility and development as the global population entered the twenty-first century. Although development continues to promote fertility decline at low and medium HDI levels, our analyses show that at advanced HDI levels, further development can reverse the declining trend in fertility. The previously negative development-fertility relationship has become J-shaped, with the HDI being positively associated with fertility among highly developed countries. This reversal of fertility decline as a result of continued economic and social development has the potential to slow the rates of population ageing, thereby ameliorating the social and economic problems that have been associated with the emergence and persistence of very low fertility.

Exposures to 1,6-hexamethylene diisocyanate during polyurethane spray painting in the U.S. Air Force.

PubMed

Carlton, G N; England, E C

2000-09-01

1,6-Hexamethylene diisocyanate (HDI) exposures were measured during polyurethane enamel spray painting at four Air Force bases. Breathing zone samples were collected for HDI monomer and polyisocyanates (oligomers) using three sampling methods: NIOSH Method 5521, the Iso-Chek sampler, and the total aerosol mass method (TAMM). Exposures to HDI monomer are low when compared to current occupational exposure limits; the highest 8-hr time-weighted average (TWA) exposure found was 3.5 micrograms/m3, below the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) of 34 micrograms/m3. HDI oligomer levels were higher; mean task exposures indicated by either the Iso-Chek sampler or TAMM are above the Oregon ceiling limit of 1 mg/m3. Eight-hour TWA exposures, however, were much lower, with only one exceeding the Oregon standard of 0.5 mg/m3. Poor worker practices commonly observed during this study included: standing in downwind positions so paint overspray passed through breathing zones; spraying toward other painters; and using excessive paint spray gun air cap pressures. Workers should stand in upwind orientation relative to the aircraft being painted, causing overspray to move away from the painter's breathing zone; adjust their position to prevent spraying other painters or limit paint application to one worker at a time; and use air cap pressure gauges prior to spraying to limit spray gun air cap pressures and reduce paint overspray generation rates. These improved techniques will result in reduced worker exposures to isocyanates.

Diisocyanate-exposed auto body shop workers: a one-year follow-up.

PubMed

Redlich, C A; Stowe, M H; Coren, B A; Wisnewski, A V; Holm, C T; Cullen, M R

2002-12-01

Diisocyanates currently are the most commonly identified cause of occupational asthma in industrialized countries. Auto body shops, a common hexamethylene diisocyanate (HDI) exposure setting, are difficult to study due to their small size and episodic exposures. A 1-year follow-up was undertaken as an adjunct to the cross-sectional SPRAY study (Survey of Painters & Repairers of Auto bodies by Yale) to investigate the effects of HDI on auto body shop workers over time and whether or not the healthy worker effect may exist in this industry. Forty-eight workers from seven shops were re-contacted. Thirty-four subjects who stayed at the same shop and 11 who left their original shop participated. No statistically significant changes in physiology, symptoms, and immunologic responses from baseline to follow-up were noted. However, significant differences between those who left the shops and those who stayed were noted. Those who left were younger, less experienced in the industry, and more likely to have a history of asthma (23 vs. 3%; P < 0.05), bronchial hyper-responsiveness (23 vs. 9%), HDI-specific IgG (64 vs. 29%; P < 0.05), and HDI-specific proliferation (S.I. 2.0 vs. 1.3; P < 0.05). The differences in workers who stayed at their shop compared to those who left, combined with the low asthma prevalence and high job turnover rate, all suggest that a healthy worker effect may exist in the auto body industry, and may in part account for the low prevalence of asthma noted in SPRAY and other cross-sectional studies of diisocyante workers. Copyright 2002 Wiley-Liss, Inc.

Incidence and mortality of kidney cancer and its relationship with HDI (Human Development Index) in the world in 2012.

PubMed

Mohammadian, Maryam; Pakzad, Reza; Towhidi, Farhad; Makhsosi, Behnam Reza; Ahmadi, Abbas; Salehiniya, Hamid

2017-01-01

Kidney cancer is among the cancers that have the highest growth rate in all age and racial groups in the world and is as the most deadly type of urinary tract cancer. Since awareness about this cancer incidence status and mortality is essential for better planning, this study aimed to investigate the incidence and mortality rate of kidney cancer and its relationship with the development index in the world in 2012. This study was an ecological study conducted based on GLOBOCAN project of the World Health Organization (WHO) for the countries in the world. The correlation between Standardized Incidence Rates (SIRs) and Standardized Mortality Rates (SMRs) of kidney cancer with HDI and its components was assessed using SPSS18. In total, 337,860 incidence cases (213,924 were men and 123,936 women) and 143,406 deaths (90,802 cases in men and 52,604 in women) of kidney cancer were recorded in 2012. A positive correlation of 0.731 was seen between SIR of kidney cancer and HDI (p≤0.001). Also, a negative correlation of 0.627 was seen between SMR of kidney cancer and HDI (p≤0.001). The incidence and mortality rate of kidney cancer is higher in developed countries. A significant positive correlation has been seen between the standardized incidence and mortality rate of kidney cancer with the Human Development Index and its components. We need more studies to examine variation in incidence and mortality of kidney cancer and its related factors in the world.

Associations between meal and snack frequency and diet quality and adiposity measures in British adults: findings from the National Diet and Nutrition Survey.

PubMed

Murakami, Kentaro; Livingstone, M Barbara E

2016-06-01

To examine how different definitions of meals and snacks can affect the associations of meal frequency (MF) and snack frequency (SF) with dietary intake and adiposity measures. Based on 7 d weighed dietary record data, all eating occasions providing ≥210 kJ of energy were divided into meals or snacks based on contribution to energy intake (≥15 % or <15 %) or time (06.00-10.00, 12.00-15.00 and 18.00-21.00 hours; other). Diet quality was assessed using the Healthy Diet Indicator (HDI) and Mediterranean Diet Score (MDS). Great Britain. British adults aged 19-64 years (n 1487). MF based on energy contribution was associated with higher intake of dietary fibre, lower intakes of non-milk extrinsic sugars and alcohol, and higher HDI (only men) and MDS. MF based on time was associated with higher HDI and MDS in women only. Conversely, irrespective of the definition of snacks, SF was associated with higher intakes of confectionery and alcohol, lower intakes of cereals, protein, fat and dietary fibre, and lower HDI (except for SF based on energy contribution in women) and MDS. After adjustment for potential confounders, MF based on time, but not MF based on energy contribution, was positively associated with BMI and waist circumference in men only. SF was positively associated with BMI and waist circumference, irrespective of the definition of snacks. Higher SF was consistently associated with lower diet quality and higher adiposity measures, while associations with MF varied depending on the definition of meals and sex.

Provincial Human Development Index, a Guide for Efficiency Level Analysis: The Case of Iran

PubMed Central

SABERMAHANI, Asma; BAROUNI, Mohsen; SEYEDIN, Hesam; ARYANKHESAL, Aidin

2013-01-01

Background Human Development Index (HDI) is a composite indicator that can show the impact of economic strategies on human life standards. The index is calculated by three main factors of income, education and health. This research studies the status of HDI across the Iranian provinces, its changes over time and the efficiency of provinces in using resources. Methods: The data for 2001 and 2009 was obtained from the Iranian Center of Statistics. Data envelopment analysis technique was used to analyze the data. To calculate the efficiency, Banker, Charnes and Cooper’s model was used. Results: The national mean for the HDI in 2001 was 0.717 while it grew to 0.747 in 2009. Except for one province, all others had an improved human development index. Low ranked provinces such as Sistan & Baluchistan and Kurdistan stayed at the bottom in 2009 as well. Some provinces such as Bushehr with developing oil industries, or those purposively benefited from national oil income showed good growth. In some provinces, such as Hormozgan, out-migration of manpower to its neighboring province, Bushehr, was associated with decrease of the provincial income level. The number of efficient provinces increased from 5 to 13 in 2009. Conclusion: Iran falls among countries with high human development index based on the 2009 data. However, the distribution of HDI status across provinces was highly varied and the difference between high- and low-developed provinces increased in 2009. The government needs to revise policies concerning distribution of resources among the provinces. PMID:23515434

Gender gaps in life expectancy: generalized trends and negative associations with development indices in OECD countries.

PubMed

Liu, Yan; Arai, Asuna; Kanda, Koji; Lee, Romeo B; Glasser, Jay; Tamashiro, Hiko

2013-08-01

Life expectancy (LE) is a major marker of individual survival. It also serves as a guide to highlight both the progress and the gaps in total social and societal health. Comparative LE in concert with measures of gender-specific experience, indices of empowerment and societal happiness and development offer a comparative tool to examine trends and similarities of societal progress as seen through the lens of cross-national experience. To determine the gender gaps in LE (GGLE) trends, we performed a longitudinal analysis, covering a period of 49 years (1960-2008). To examine the association of GGLE with development indices, we used the 2007 GGLE data, the newest happiness data mostly drawn from 2006; the 2006 Human Development Index (HDI) data and the 2006 Gender Empowerment Measure (GEM) data. It revealed that most of the Organization for Economic Co-operation and Development (OECD) countries had a GGLE trend that occurred in an inverted U-curve fashion. We divided them into three subgroups based on the peak years of respective GGLE. The earlier the peak year, the happier the countries, the higher the HDI and the smaller the current GGLE are. Association analysis indicates that Happiness, HDI and GEM are all negatively associated with GGLE. This pattern suggests that GGLE undergoes three phases of growth, peak and stability and decline. Japan will soon be seeing its GGLE gradually shrinking in the foreseeable future. The continuing increases in Happiness, HDI and GEM are associated with a decrease in GGLE, which should be carefully taken into consideration.

Diagnostic ultrasound and telemedicine utilization in the international space station

NASA Astrophysics Data System (ADS)

Carter, Stephen J.; Stewart, Brent K.; Kushmerick, Martin J.; Langer, Steve G.; Schmiedl, Udo P.; Winter, Thomas C.; Conley, Kevin E.; Jubrias, Sharon A.

1999-01-01

Clinical diagnostic ultrasound (US) is experiencing an expanding role that is well suited to application on the International Space Station (ISS). Diagnostic US can be used to reduce the risks associated with long duration human space flight by providing a non-invasive tool with head-to-toe diagnostic capability in both biomedical research and crew health care. General health care of the astronauts will be diagnosed with US, e.g., kidney stones, gall bladder disease, appendicitis, etc. Initial studies will focus on detection of ``ureteral jets'' in the bladder. This is a non-invasive test to rule out obstructive uropathy from kidney stones with minimal requirements for crew training. Biomedical research experiments, focusing on the effects of the microgravity environment, will be performed using both the HHU and the HDI 5000. US will be used to evaluate bone density and muscle mass in this environment. Prolonged or emergency EVAs may occur with the ISS. The hand-held ultrasound unit (HHU) and its telemedicine capability will be used in EVA settings to monitor events such as decompression sickness (DCS) microbubble formation in the cardiovascular system. There will be telemetry links between the HHU and the ATL/Lockheed Martin rack mounted HDI 5000 in the ISS Human Research Facility (HRF), as well as between the HRF and medical expertise on the ground. These links will provide the ISS with both real-time and store-and-forward telemedicine capabilities. The HHU can also be used with the existing telemedicine instrument pack (TIP).

High density circuit technology, part 1

NASA Technical Reports Server (NTRS)

Wade, T. E.

1982-01-01

The metal (or dielectric) lift-off processes used in the semiconductor industry to fabricate high density very large scale integration (VLSI) systems were reviewed. The lift-off process consists of depositing the light-sensitive material onto the wafer and patterning first in such a manner as to form a stencil for the interconnection material. Then the interconnection layer is deposited and unwanted areas are lifted off by removing the underlying stencil. Several of these lift-off techniques were examined experimentally. The use of an auxiliary layer of polyimide to form a lift-off stencil offers considerable promise.

Optical Interconnections for VLSI Computational Systems Using Computer-Generated Holography.

NASA Astrophysics Data System (ADS)

Feldman, Michael Robert

Optical interconnects for VLSI computational systems using computer generated holograms are evaluated in theory and experiment. It is shown that by replacing particular electronic connections with free-space optical communication paths, connection of devices on a single chip or wafer and between chips or modules can be improved. Optical and electrical interconnects are compared in terms of power dissipation, communication bandwidth, and connection density. Conditions are determined for which optical interconnects are advantageous. Based on this analysis, it is shown that by applying computer generated holographic optical interconnects to wafer scale fine grain parallel processing systems, dramatic increases in system performance can be expected. Some new interconnection networks, designed to take full advantage of optical interconnect technology, have been developed. Experimental Computer Generated Holograms (CGH's) have been designed, fabricated and subsequently tested in prototype optical interconnected computational systems. Several new CGH encoding methods have been developed to provide efficient high performance CGH's. One CGH was used to decrease the access time of a 1 kilobit CMOS RAM chip. Another was produced to implement the inter-processor communication paths in a shared memory SIMD parallel processor array.

Home page | prc.gatech.edu | Georgia Institute of Technology | Atlanta, GA

Science.gov Websites

Interconnections & Assembly Low Cost Glass Interposers & Packages MEMS and Sensors GRA Opportunities addressing electrical, mechanical and thermal barriers. Low-cost Glass Interposer and Package Panel-based ultra-thin glass as a high performance, high I/O density, and low cost platform. Interconnections and

Studies on the quality nutrition in women with polycystic ovary syndrome (PCOS)

PubMed

Szczuko, Małgorzata; Sankowska, Patrycja; Zapałowska-Chwyć, Marta; Wysokiński, Paweł

Polycystic ovary syndrome (PCOS) manifests itself with various symptoms, therefore it interests representatives of many medical specializations: general practitioners, gynecologists, endocrinologists, dermatologists, cardiologists and those who deal with metabolic disorders, such as dieticians. The aim of this study was perform the qualitative assessment of components of diets of women with PCOS as one of the major factor contributing to the disease. The study was performed on 54 women of childbearing age with PCOS diagnosed according to on the Rotterdam criteria. Qualitative assessment of the diets on the basis of 216 menus was performed based on the analysis of 3-day food diaries and food records taken from the last 24-hour dietary interview. Diets quality assessment was made using three types of point tests: Szewczyński’s Diets’ classification (SDC), Bielińska’s Test with Kulesza’s modification (BTK), Healthy Diet Indicator (HDI). Average waist-hip ratio (WHR) and body mass index (BMI) was above the standard 0.91± 0.08 and 29.16 ± 5.8 kg/m2. Qualitative analysis performed with point tests SDC, BT-K and HDI revealed that the majority of the diets were composed inappropriately, containing many mistakes. Statistically significant correlations (Pearson’s) were determined between HDI test and the body weight and BMI. When analyzing the type of the meals also the correlations (Spearman’s) between BMI and BMI category in BT-K test. Mistakes in diets of women with PCOS are the cause of metabolic disorders related to improper function of ovaries. Native test BT-K seems to be a better method then test SDC and probably HDI of assessing diet in women with PCOS from Poland.

Laryngeal cancer: Global socioeconomic trends in disease burden and smoking habits.

PubMed

Ramsey, Tam; Guo, Eric; Svider, Peter F; Lin, Hosheng; Syeda, Sara; Raza, S Naweed; Fribley, Andrew M

2018-03-06

To characterize health burden and determine the associated level of equality of laryngeal carcinoma (LC) burden at a global level. One hundred eighty-four countries were organized by socioeconomic status using Human Development Index (HDI) categorizations provided by the United Nations Development Program. Disability-adjusted life years (DALYs), obtained from The Global Health Data Exchange, were calculated and compared between each HDI category for the period from 1990 to 2015. Equality of LC burden was then evaluated with concentration indices. Global LC burden, as measured by age-standardized DALYs, has improved significantly over the 25-year period studied. This burden has declined for very high, high, and medium HDI countries, whereas it has remained unchanged for low HDI countries. The majority of LC global burden was found in high socioeconomic countries before 2010 and has shifted toward low socioeconomic countries, as indicated by concentration indices. Over the last 25 years, Central and Eastern Europe continue to have the largest disease burden in the world. This is the first analysis that we are aware of investigating health disparities of LC at a global level. The global burden of the disease has declined, which is a trend corresponding with significantly reduced smoking behaviors in developed countries. Although the global inequality gap decreased between 2010 and 2015, there remain reasons for concern. Smoking continues to trend upward in low socioeconomic countries, which could increase LC burden in low socioeconomic countries in the near future. A new global initiative directed toward low socioeconomic countries may yield dividends in preventing subsequent disparities in the LC burden. 4. Laryngoscope, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

Effect of phorbol esters on the macrophage-mediated biodegradation of polyurethanes via protein kinase C activation and other pathways.

PubMed

McBane, Joanne Eileen; Santerre, J P; Labow, Rosalind

2009-01-01

It was previously found that re-seeding monocyte-derived macrophages (MDM) on polycarbonate-based polyurethanes (PCNUs) in the presence of the protein kinase C (PKC) activator phorbol myristate acetate (PMA) inhibited MDM-mediated degradation of PCNUs synthesized with 1,6-hexane diisocyanate (HDI), as well as esterase activity and monocyte-specific esterase (MSE) protein. However, no effect on the degradation of a 4,4'-methylene bisphenyl (MDI)-derived PCNU (MDI321) occurred. This finding suggested that oxidation, a process linked to the PKC pathway, was not activated in the same manner for all PCNUs. In the current study MDM were re-seeded onto the above PCNU surfaces with PMA, PKC-inactive 4alphaPMA and the PKC inhibitor bisindolylmaleimide I hydrochloride (BIM) for 48 h before assaying for PCNU degradation, esterase activity, MSE protein, DNA, cell viability and cell morphology. 4alphaPMA did not alter MDM-mediated HDI PCNU degradation but MDI321 degradation increased in this condition. BIM alone had no effect on any parameter; however, when BIM and PMA were added together, the PMA inhibition of biodegradation, esterase activity and MSE protein was partially reversed for MDM on HDI PCNUs only. Adding PMA to MDM on HDI PCNUs increased intercellular connections, whereas 4alphaPMA or BIM+PMA increased cell size. Although this study demonstrated a role for oxidation via a PKC-activated pathway in MDM-mediated PCNU degradation, phorbol esters appear to also activate non-PKC pathways that have roles in biodegradation. Moreover, the sensitivity to material surface chemistry in the MDM response to each PCNU dictates a multi-factorial degradative process involving alternate material specific oxidative and hydrolytic mechanisms.

Systematic review of the relationship of Helicobacter pylori infection with geographical latitude, average annual temperature and average daily sunshine.

PubMed

Lu, Chao; Yu, Ye; Li, Lan; Yu, Chaohui; Xu, Ping

2018-04-17

Helicobacter pylori (H. pylori) infection is a worldwide threat to human health with high prevalence. In this study, we analyzed the relationship between latitude, average annual temperature, average daily sunshine time and H. pylori infection. The PubMed, ClinicalTrials.gov , EBSCO and Web of Science databases were searched to identify studies reporting H. pylori infection. Latitude 30° was the cut-off level for low and mid-latitude areas. We obtained information for latitude, average annual temperature, average daily sunshine, and Human Development Index (HDI) from reports of studies of the relationships with H. pylori infection. Of the 51 studies included, there was significant difference in H. pylori infection between the low- and mid-latitude areas (P = 0.05). There was no significant difference in the prevalence of H. pylori infection in each 15°-latitude zone analyzed (P = 0.061). Subgroup analysis revealed the highest and lowest H. pylori infection rates in the developing regions at > 30° latitude subgroup and the developed regions at < 30° latitude subgroup, respectively (P < 0.001). Multivariate analysis showed that average annual temperature, average daily sunshine time and HDI were significantly correlated with H. pylori infection (P = 0.009, P < 0.001, P < 0.001), while there was no correlation between H. pylori infection and latitude. Our analysis showed that higher average annual temperature was associated with lower H. pylori infection rates, while average daily sunshine time correlated positively with H. pylori infection. HDI was also found to be a significant factor, with higher HDI associated with lower infection rates. These findings provide evidence that can be used to devise strategies for the prevention and control of H. pylori.

The International Epidemiology of Lung Cancer: Latest Trends, Disparities, and Tumor Characteristics

PubMed Central

Cheng, Ting-Yuan David; Cramb, Susanna M.; Baade, Peter D.; Youlden, Danny R.; Nwogu, Chukwumere; Reid, Mary E.

2017-01-01

Introduction We aim to update global lung cancer epidemiology and describe changing trends and disparities. Methods We presented country-specific incidence and mortality from GLOBOCAN 2012, by region and socioeconomic factors via the Human Development Index (HDI). Between- and within-country incidence by histological type was analyzed from Cancer Incidence in Five Continents Volume X (IARC). Trend analyses including the IARC data, cancer registries, and the WHO Mortality database were conducted using Joinpoint regression. Survival was compared between and within countries, and by histology. Results In 2012, there were 1.82 and 1.59 million new cases and deaths of lung cancer worldwide, respectively. Incidence was highest in very high HDI countries and lowest in low HDI countries (42.2 vs. 7.9/100,000 for males and 21.8 vs. 3.1/100,000 for females, respectively). In most countries with a very high HDI, as male incidence decreased gradually (ranging from −0.3% in Spain to −2.5% in the USA each year), female incidence continued to increase (by 1.4% each year in Australia to 6.1% in recent years in Spain). While histology varied between countries, adenocarcinoma was more common than squamous cell carcinoma, particularly among females (e.g., in Chinese females, the adenocarcinoma-to-squamous cell carcinoma ratio=6.6). Five-year relative survival varied from 2% (Libya) to 30% (Japan), with substantial within-country differences. Conclusion Lung cancer will continue to be a major health problem well through the first half of this century. Preventive strategies, particularly tobacco control, tailored to populations at highest risk are key to reduce the global burden of lung cancer. PMID:27364315

Inequality in Maternal Mortality in Iran: An Ecologic Study

PubMed Central

Tajik, Parvin; Nedjat, Saharnaz; Afshar, Nozhat Emami; Changizi, Nasrin; Yazdizadeh, Bahareh; Azemikhah, Arash; Aamrolalaei, Sima; Majdzadeh, Reza

2012-01-01

Background: Maternal mortality (MM) is an avoidable death and there is national, international and political commitment to reduce it. The objective of this study is to examine the relation of MM to socioeconomic factors and its inequality in Iran's provinces at an ecologic level. Methods: The overall MM from each province was considered for 3 years from 2004 to 2006. The five independent variables whose relations were studied included the literacy rate among men and women in each province, mean annual household income per capita, Gini coefficients in each province, and Human Development Index (HDI). The correlation of Maternal Mortality Ratio (MMR) to the above five variables was evaluated through Pearson's correlation coefficient (simple and weighted for each province's population) and linear regression – by considering MMR as the dependent variable and the Gini coefficient, HDI, and difference in literacy rate among men and women as the independent variables. Results: The mean MMR in the years 2004–2006 was 24.7 in 100,000 live births. The correlation coefficients between MMR and literacy rate among women, literacy rate among men, the mean annual household income per capita, Gini coefficient and HDI were 0.82, 0.90, –0.61, 0.52 and –0.77, respectively. Based on multivariate regression, MMR was significantly associated with HDI (standardized B=–0.93) and difference in literacy rate among men and women (standardized B=–0.47). However, MMR was not significantly associated with the Gini coefficient. Conclusion: This study shows the association between socioeconomic variables and their inequalities with MMR in Iran's provinces at an ecologic level. In addition to the other direct interventions performed to reduce MM, it seems essential to especially focus on more distal factors influencing MMR. PMID:22347608

Adherence to a healthy diet according to the World Health Organization guidelines and all-cause mortality in elderly adults from Europe and the United States.

PubMed

Jankovic, Nicole; Geelen, Anouk; Streppel, Martinette T; de Groot, Lisette C P G M; Orfanos, Philippos; van den Hooven, Edith H; Pikhart, Hynek; Boffetta, Paolo; Trichopoulou, Antonia; Bobak, Martin; Bueno-de-Mesquita, H B; Kee, Frank; Franco, Oscar H; Park, Yikyung; Hallmans, Göran; Tjønneland, Anne; May, Anne M; Pajak, Andrzej; Malyutina, Sofia; Kubinova, Růžena; Amiano, Pilar; Kampman, Ellen; Feskens, Edith J

2014-11-15

The World Health Organization (WHO) has formulated guidelines for a healthy diet to prevent chronic diseases and postpone death worldwide. Our objective was to investigate the association between the WHO guidelines, measured using the Healthy Diet Indicator (HDI), and all-cause mortality in elderly men and women from Europe and the United States. We analyzed data from 396,391 participants (42% women) in 11 prospective cohort studies who were 60 years of age or older at enrollment (in 1988-2005). HDI scores were based on 6 nutrients and 1 food group and ranged from 0 (least healthy diet) to 70 (healthiest diet). Adjusted cohort-specific hazard ratios were derived by using Cox proportional hazards regression and subsequently pooled using random-effects meta-analysis. During 4,497,957 person-years of follow-up, 84,978 deaths occurred. Median HDI scores ranged from 40 to 54 points across cohorts. For a 10-point increase in HDI score (representing adherence to an additional WHO guideline), the pooled adjusted hazard ratios were 0.90 (95% confidence interval (CI): 0.87, 0.93) for men and women combined, 0.89 (95% CI: 0.85, 0.92) for men, and 0.90 (95% CI: 0.85, 0.95) for women. These estimates translate to an increased life expectancy of 2 years at the age of 60 years. Greater adherence to the WHO guidelines is associated with greater longevity in elderly men and women in Europe and the United States. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Diet quality and adherence to a healthy diet in Japanese male workers with untreated hypertension.

PubMed

Kanauchi, Masao; Kanauchi, Kimiko

2015-07-10

As Japanese societies rapidly undergo westernisation, the prevalence of hypertension is increasing. We investigated the association between dietary quality and the prevalence of untreated hypertension in Japanese male workers. We conducted a cross-sectional study of 433 male workers who completed a brief food frequency questionnaire. Adherence to the WHO-based Healthy Diet Indicator (HDI), the American Heart Association 2006 Diet and Lifestyle Recommendations, the Dietary Approaches to Stop Hypertension (DASH) diet, and Mediterranean-style diet was assessed using four adherence indexes (HDI score, AI-84 score, DASH score and MED score). Hypertension classes were classified into three categories: non-hypertension, untreated hypertension and treated hypertension (ie, taking antihypertensive medication). The prevalence of untreated hypertension and treated hypertension was 22.4% and 8.5%, respectively. Patients with untreated hypertension had significantly lower HDI and AI-84 scores compared with non-hypertension. DASH and MED scores across the three hypertension classes were comparable. After adjusting for age, energy intake, smoking habit, alcohol drinking, physical activity and salt intake, a low adherence to HDI and a lowest quartile of AI-84 score were associated with a significantly higher prevalence of untreated hypertension, with an OR of 3.33 (95% CI 1.39 to 7.94, p=0.007) and 2.23 (1.09 to 4.53, p=0.027), respectively. A lower dietary quality was associated with increased prevalence of untreated hypertension in Japanese male workers. Our findings support a potential beneficial impact of nutritional assessment using diet qualities. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Dietary patterns in relation to quality-adjusted life years in the EPIC-NL cohort.

PubMed

Fransen, Heidi P; Beulens, Joline W J; May, Anne M; Struijk, Ellen A; Boer, Jolanda M A; de Wit, G Ardine; Onland-Moret, N Charlotte; van der Schouw, Yvonne T; Bueno-de-Mesquita, H Bas; Hoekstra, Jeljer; Peeters, Petra H M

2015-08-01

Dietary patterns have been associated with the incidence or mortality of individual non-communicable diseases, but their association with disease burden has received little attention. The aim of our study was to relate dietary patterns to health expectancy using quality-adjusted life years (QALYs) as outcome parameter. Data from the EPIC-NL study were used, a prospective cohort study of 33,066 healthy men and women aged 20-70 years at recruitment. A lifestyle questionnaire and a validated food frequency questionnaire were administered at study entry (1993-1997). Five dietary patterns were studied: three a priori patterns (the modified Mediterranean Diet Score (mMDS), the WHO-based Healthy Diet Indicator (HDI) and the Dutch Healthy Diet index (DHD-index)) and two a posteriori data-based patterns. QALYs were used as a summary health measure for healthy life expectancy, combining a person's life expectancy with a weight reflecting loss of quality of life associated with having chronic diseases. The mean QALYs of the participants were 74.9 (standard deviation 4.4). A higher mMDS and HDI were associated with a longer life in good health. Participants who had a high mMDS score (6-9) had 0.17 [95% CI, 0.05; 0.30] more QALYs than participants with a low score (0-3), equivalent to two months longer life in good health. Participants with a high HDI score also had more QALYs (0.15 [95% CI, 0.03; 0.27]) than participants with a low HDI score. A Mediterranean-type diet and the Healthy Diet Indicator were associated with approximately 2months longer life in good health. Copyright © 2015 Elsevier Inc. All rights reserved.

Incidence and Mortality of Liver Cancer and Their Relationship with Development in Asia.

PubMed

Mohammadian, Maryam; Soroush, Ali; Mohammadian-Hafshejani, Abdollah; Towhidi, Farhad; Hadadian, Fatemeh; Salehiniya, Hamid

2016-01-01

Liver cancer (LC) is the sixth world most common cancer and the second leading cause of cancer death. Due to the importance and necessity of awareness about the incidence and mortality of diseases to perform prevention programs, this study focused on data for LC and its relationship with the human development index (HDI) and its components in Asia in 2012. This ecological study was based on GLOBOCAN data for Asian countries. We assessed correlations between standardized incidence rates (SIR) and standardized mortality rates (SMR) of LC with HDI and its components using of SPSS18. A total of 582,420 incident cases and 557,097 deaths were recorded in Asian countries in 2012. The five with the highest SIR were Mongolia, Lao PDR, Vietnam, Republic of Korea and Thailand and those with the highest SMR were Mongolia, Lao PDR, Vietnam, Cambodia and Thailand. A negative relation was observed between HDI and LC for SIR of 0.049 (P=0.748) and for SMR of 0.07 (P=0.645), with life expectancy at birth a positive relation for SIR of 0.061 (P=0.687) and a negative relation for SMR of 0.079 (P=0.603), with the average years of education a negative relation fo SIR of 0.476 (p=0.952) and for SMR of 0.032 (P=0.832), and with the country income level per person a negative relation for SMI of 0.11 (p=0.465) and for SMR of 0.113 (P=0.455). The incidence of LC is more in less developed and developing countries but statistically significant correlations were not found between standardized incidence and mortality rates of LC, and HDI and its dimensions.

The incidence and mortality of lung cancer and their relationship to development in Asia.

PubMed

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Pakzad, Iraj; Salehiniya, Hamid

2015-12-01

Lung cancer is the deadliest cancer worldwide and the most common cancer in Asia. It is necessary to get information on epidemiology and inequalities related to incidence and mortality of the cancer to use for planning and further research. This study aimed to investigate epidemiology and inequality of incidence and mortality from lung cancer in Asia. The study was conducted based on data from the world data of cancer and the World Bank [including the Human Development Index (HDI) and its components]. The incidence and mortality rates, and cancer distribution maps were drawn for Asian countries. To analyze data, correlation test between incidence and death rates, and HDI and its components at significant was used in the significant level of 0.05 using SPSS software. A total of 1,033,881 incidence (71.13% were males and 28.87% were females. Sex ratio was 2.46) and 936,051 death (71.45% in men and 28.55% in women. The sex ratio was 2.50) recorded in Asian countries in 2012. Five countries with the highest standardized incidence and mortality rates of lung cancer were Democratic Republic of Korea, China, Armenia, Turkey, and Timor-Leste, respectively. Correlation between HDI and standardized incidence rate was 0.345 (P=0.019), in men 0.301 (P=0.042) and in women 0.3 (P=0.043); also between HDI and standardized mortality rate 0.289 (P=0.052), in men 0.265 (P=0.075) and in women 0.200 (P=0.182). The incidence of lung cancer has been increasing in Asia. It is high in men. Along with development, the incidence and mortality from lung cancer increases. It seems necessary to study reasons and factors of increasing the incidence and mortality of lung cancer in Asian countries.

Three-dimensional interconnected porous graphitic carbon derived from rice straw for high performance supercapacitors

NASA Astrophysics Data System (ADS)

Jin, Hong; Hu, Jingpeng; Wu, Shichao; Wang, Xiaolan; Zhang, Hui; Xu, Hui; Lian, Kun

2018-04-01

Three-dimensional interconnected porous graphitic carbon materials are synthesized via a combination of graphitization and activation process with rice straw as the carbon source. The physicochemical properties of the three-dimensional interconnected porous graphitic carbon materials are characterized by Nitrogen adsorption/desorption, Fourier-transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, Scanning electron microscopy and Transmission electron microscopy. The results demonstrate that the as-prepared carbon is a high surface area carbon material (a specific surface area of 3333 m2 g-1 with abundant mesoporous and microporous structures). And it exhibits superb performance in symmetric double layer capacitors with a high specific capacitance of 400 F g-1 at a current density of 0.1 A g-1, good rate performance with 312 F g-1 under a current density of 5 A g-1 and favorable cycle stability with 6.4% loss after 10000 cycles at a current density of 5 A g-1 in the aqueous electrolyte of 6M KOH. Thus, rice straw is a promising carbon source for fabricating inexpensive, sustainable and high performance supercapacitors' electrode materials.

Nanostructured CuS networks composed of interconnected nanoparticles for asymmetric supercapacitors.

PubMed

Fu, Wenbin; Han, Weihua; Zha, Heming; Mei, Junfeng; Li, Yunxia; Zhang, Zemin; Xie, Erqing

2016-09-21

Nanostructured metal sulfides with excellent electrochemical activity and electrical conductivity are particularly promising for applications in high-performance energy storage devices. Here, we report on the facile synthesis of nanostructured CuS networks composed of interconnected nanoparticles as novel battery-type materials for asymmetric supercapacitors. We find that the CuS networks exhibit a high specific capacity of 49.8 mA g(-1) at a current density of 1 A g(-1), good rate capability and cycle stability. The superior performance could be attributed to the interconnected nanoparticles of CuS networks, which can facilitate electrolyte diffusion and provide fast electron pathways. Furthermore, an aqueous asymmetric supercapacitor has been assembled by using the CuS networks as the positive electrode and activated carbon as the negative electrode. The assembled device can work at a high operating voltage of 1.6 V and show a maximum energy density of 17.7 W h kg(-1) at a power density of 504 W kg(-1). This study indicates that the CuS networks have great potential for supercapacitor applications.

MoS2/Ni3S4 composite nanosheets on interconnected carbon shells as an excellent supercapacitor electrode architecture for long term cycling at high current densities

NASA Astrophysics Data System (ADS)

Qin, Shengchun; Yao, Tinghui; Guo, Xin; Chen, Qiang; Liu, Dequan; Liu, Qiming; Li, Yali; Li, Junshuai; He, Deyan

2018-05-01

In this paper, we report an electrode architecture of molybdenum disulfide (MoS2)/nickel sulfide (Ni3S4) composite nanosheets anchored on interconnected carbon (C) shells (C@MoS2/Ni3S4). Electrochemical measurements indicate that the C@MoS2/Ni3S4 structure possesses excellent supercapacitive properties especially for long term cycling at high current densities. A specific capacitance as high as ∼640.7 F g-1 can still be delivered even after 10,000 cycles at a high current density of 20 A g-1. From comparison of microstructures and electrochemical properties of the related materials/structures, the improved performance of C@MoS2/Ni3S4 can be attributed to the relatively dispersedly distributed nanosheet-shaped MoS2/Ni3S4 that provides efficient contact with electrolyte and effectively buffers the volume change during charge/discharge processes, enhanced cycling stability by MoS2, and reduced equivalent series resistance by the interconnected C shells.

An efficient optical architecture for sparsely connected neural networks

NASA Technical Reports Server (NTRS)

Hine, Butler P., III; Downie, John D.; Reid, Max B.

1990-01-01

An architecture for general-purpose optical neural network processor is presented in which the interconnections and weights are formed by directing coherent beams holographically, thereby making use of the space-bandwidth products of the recording medium for sparsely interconnected networks more efficiently that the commonly used vector-matrix multiplier, since all of the hologram area is in use. An investigation is made of the use of computer-generated holograms recorded on such updatable media as thermoplastic materials, in order to define the interconnections and weights of a neural network processor; attention is given to limits on interconnection densities, diffraction efficiencies, and weighing accuracies possible with such an updatable thin film holographic device.

Comparison of microrings and microdisks for high-speed optical modulation in silicon photonics

NASA Astrophysics Data System (ADS)

Ying, Zhoufeng; Wang, Zheng; Zhao, Zheng; Dhar, Shounak; Pan, David Z.; Soref, Richard; Chen, Ray T.

2018-03-01

The past several decades have witnessed the gradual transition from electrical to optical interconnects, ranging from long-haul telecommunication to chip-to-chip interconnects. As one type of key component in integrated optical interconnect and high-performance computing, optical modulators have been well developed these past few years, including ultrahigh-speed microring and microdisk modulators. In this paper, a comparison between microring and microdisk modulators is well analyzed in terms of dimensions, static and dynamic power consumption, and fabrication tolerance. The results show that microdisks have advantages over microrings in these aspects, which gives instructions to the chip design of high-density integrated systems for optical interconnects and optical computing.

All-zigzag graphene nanoribbons for planar interconnect application

NASA Astrophysics Data System (ADS)

Chen, Po-An; Chiang, Meng-Hsueh; Hsu, Wei-Chou

2017-07-01

A feasible "lightning-shaped" zigzag graphene nanoribbon (ZGNR) structure for planar interconnects is proposed. Based on the density functional theory and non-equilibrium Green's function, the electron transport properties are evaluated. The lightning-shaped structure increases significantly the conductance of the graphene interconnect with an odd number of zigzag chains. This proposed technique can effectively utilize the linear I-V characteristic of asymmetric ZGNRs for interconnect application. Variability study accounting for width/length variation and the edge effect is also included. The transmission spectra, transmission eigenstates, and transmission pathways are analyzed to gain the physical insights. This lightning-shaped ZGNR enables all 2D material-based devices and circuits on flexible and transparent substrates.

Tritium release from neutron-irradiated Li 2O sintered pellets: porosity dependence

NASA Astrophysics Data System (ADS)

Tanifuji, Takaaki; Yamaki, Daiju; Takahashi, Tadashi; Iwamoto, Akira

2000-12-01

The tritium release behaviour from sintered Li 2O pellets of various densities (71-98.5% theoretical density, T.D.) has been investigated by heating tests at a constant rate. It is shown that the tritium release rate depends on porosity at densities above 87% T.D., while no dependence was observed at densities below 86% T.D. The tritium release process is thought to consist of three stages described as follows: (1) the liberation of tritium trapped at point defects due to their recovery (peak at around 570 K); (2) the advection through interconnected pores via adsorption and desorption on their inner walls and diffusion in the gas phase of interconnected pores (peak at around 620 K); (3) the dissolution and release of tritium trapped in closed pores (peaks at around 700, 830 and 1000 K).

Neglected tropical diseases in Brazil.

PubMed

Lindoso, José Angelo L; Lindoso, Ana Angélica B P

2009-01-01

Poverty is intrinsically related to the incidence of Neglected Tropical Diseases (NTDs). The main countries that have the lowest human development indices (HDI) and the highest burdens of NTDs are located in tropical and subtropical regions of the world. Among these countries is Brazil, which is ranked 70th in HDI. Nine out of the ten NTDs established by the World Health Organization (WHO) are present in Brazil. Leishmaniasis, tuberculosis, dengue fever and leprosy are present over almost the entire Brazilian territory. More than 90% of malaria cases occur in the Northern region of the country, and lymphatic filariasis and onchocerciasis occur in outbreaks in a particular region. The North and Northeast regions of Brazil have the lowest HDIs and the highest rates of NTDs. These diseases are considered neglected because there is not important investment in projects for the development of new drugs and vaccines and existing programs to control these diseases are not sufficient. Another problem related to NTDs is co-infection with HIV, which favors the occurrence of severe clinical manifestations and therapeutic failure. In this article, we describe the status of the main NTDs currently occurring in Brazil and relate them to the HDI and poverty.

Deep cultural ancestry and human development indicators across nation states

PubMed Central

Sookias, Roland B.; Passmore, Samuel

2018-01-01

How historical connections, events and cultural proximity can influence human development is being increasingly recognized. One aspect of history that has only recently begun to be examined is deep cultural ancestry, i.e. the vertical relationships of descent between cultures, which can be represented by a phylogenetic tree of descent. Here, we test whether deep cultural ancestry predicts the United Nations Human Development Index (HDI) for 44 Eurasian countries, using language ancestry as a proxy for cultural relatedness and controlling for three additional factors—geographical proximity, religion and former communism. While cultural ancestry alone predicts HDI and its subcomponents (income, health and education indices), when geographical proximity is included only income and health indices remain significant and the effect is small. When communism and religion variables are included, cultural ancestry is no longer a significant predictor; communism significantly negatively predicts HDI, income and health indices, and Muslim percentage of the population significantly negatively predicts education index, although the latter result may not be robust. These findings indicate that geographical proximity and recent cultural history—especially communism—are more important than deep cultural factors in current human development and suggest the efficacy of modern policy initiatives is not tightly constrained by cultural ancestry. PMID:29765628

[Environmental health and inequalities: building indicators for sustainable development].

PubMed

Carneiro, Fernando Ferreira; Franco Netto, Guilherme; Corvalan, Carlos; de Freitas, Carlos Machado; Sales, Luiz Belino Ferreira

2012-06-01

Despite its progress in terms of socio-economic indicators, Brazil is still unequal, which is due to an unequal and exclusionary historical process. In this paper we selected the Human Development Index - HDI and other social, economic, environmental and health indicators to exemplify this situation. We selected the municipalities that had the lowest HDI in the country in 2000 comparing their evolution over time between 2000 and 2010 by means of indicators linked to the economic, environmental and social pillars of sustainable development. These municipalities have an HDI classified as low (<0.500), and correspond to countries such as Laos, Yemen, Haiti and Madagascar. At national level, data for the decade show a significant improvement in economic indicators (decrease from 23% to 8.9% of people living on less than a quarter of the minimum wage); social indicators (increase from 86.5% to 90.2% of literacy in women), and the environmental indicator associated with access to the water grid, which also improved to a lesser extent (increase from 81% to 85%). It was concluded that in order to achieve sustainable development with quality of life, the improvement of sanitation and education indicators should be a priority for Brazil.

Deep cultural ancestry and human development indicators across nation states.

PubMed

Sookias, Roland B; Passmore, Samuel; Atkinson, Quentin D

2018-04-01

How historical connections, events and cultural proximity can influence human development is being increasingly recognized. One aspect of history that has only recently begun to be examined is deep cultural ancestry, i.e. the vertical relationships of descent between cultures, which can be represented by a phylogenetic tree of descent. Here, we test whether deep cultural ancestry predicts the United Nations Human Development Index (HDI) for 44 Eurasian countries, using language ancestry as a proxy for cultural relatedness and controlling for three additional factors-geographical proximity, religion and former communism. While cultural ancestry alone predicts HDI and its subcomponents (income, health and education indices), when geographical proximity is included only income and health indices remain significant and the effect is small. When communism and religion variables are included, cultural ancestry is no longer a significant predictor; communism significantly negatively predicts HDI, income and health indices, and Muslim percentage of the population significantly negatively predicts education index, although the latter result may not be robust. These findings indicate that geographical proximity and recent cultural history-especially communism-are more important than deep cultural factors in current human development and suggest the efficacy of modern policy initiatives is not tightly constrained by cultural ancestry.

Epidemiology and Inequality in the Incidence and Mortality of Nasopharynx Cancer in Asia.

PubMed

Mahdavifar, Neda; Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Khosravi, Bahman; Salehiniya, Hamid

2016-12-01

One of the most common head and neck cancers is nasopharynx cancer. Knowledge about the incidence and mortality of this disease and its distribution in terms of geographical areas is necessary for further study and better planning. Therefore, this study was conducted with the aim of determining the incidence and mortality rates of nasopharynx cancer and its relationship with the Human Development Index (HDI) in Asia in 2012. The aim of this ecologic study was to assess the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its components, which include the following: life expectancy at birth, mean years of schooling, and gross national income per capita. Data about SIR and SMR for every Asian country for 2012 were obtained from the global cancer project. We used the correlation bivariate method for the assessment. Statistical significance was assumed if p  < 0.05. All reported p values are two-sided. Statistical analyses were performed using SPSS (Version 15.0, SPSS Inc.). A total of 68,272 cases (males, 71.02%; females, 28.97%; sex ratio, 2.45) and 40,530 mortalities (males, 71.63%; females, 28.36%; sex ratio, 2.52) were recorded in Asian countries in 2012. The five countries with the highest ASIR of nasopharynx cancer were Malaysia, Singapore, Indonesia, Vietnam, and Brunei, and the five countries with the highest ASMR were Indonesia, Vietnam, Singapore, Malaysia, and Brunei. The correlation between HDI and ASIR was 0.097 ( p  = 0.520) [0.105 in men ( p  = 0.488) and 0.119 in women ( p  = 0.901)]. The correlation between HDI and ASMR was -0.102 ( p  = 0.502) [-0.072 in men ( p  = 0.633) and -0.224 in women ( p  = 0.134)]. Nasopharynx cancer is native to Southeast Asia. The highest incidence and mortality rates are found in Malaysia, Singapore, Indonesia, Vietnam, and Brunei. No significant relation was found between the standardized incidence and mortality rates of nasopharynx cancer and the HDI components. Further studies are recommended in Southeast Asian countries in order to find the etiology of cancer, as well as its diagnosis and treatment.

Can amorphization take place in nanoscale interconnects?

PubMed

Kumar, S; Joshi, K L; van Duin, A C T; Haque, M A

2012-03-09

The trend of miniaturization has highlighted the problems of heat dissipation and electromigration in nanoelectronic device interconnects, but not amorphization. While amorphization is known to be a high pressure and/or temperature phenomenon, we argue that defect density is the key factor, while temperature and pressure are only the means. For nanoscale interconnects carrying modest current density, large vacancy concentrations may be generated without the necessity of high temperature or pressure due to the large fraction of grain boundaries and triple points. To investigate this hypothesis, we performed in situ transmission electron microscope (TEM) experiments on 200 nm thick (80 nm average grain size) aluminum specimens. Electron diffraction patterns indicate partial amorphization at modest current density of about 10(5) A cm(-2), which is too low to trigger electromigration. Since amorphization results in drastic decrease in mechanical ductility as well as electrical and thermal conductivity, further increase in current density to about 7 × 10(5) A cm(-2) resulted in brittle fracture failure. Our molecular dynamics (MD) simulations predict the formation of amorphous regions in response to large mechanical stresses (due to nanoscale grain size) and excess vacancies at the cathode side of the thin films. The findings of this study suggest that amorphization can precede electromigration and thereby play a vital role in the reliability of micro/nanoelectronic devices.

Chip-scale integrated optical interconnects: a key enabler for future high-performance computing

NASA Astrophysics Data System (ADS)

Haney, Michael; Nair, Rohit; Gu, Tian

2012-01-01

High Performance Computing (HPC) systems are putting ever-increasing demands on the throughput efficiency of their interconnection fabrics. In this paper, the limits of conventional metal trace-based inter-chip interconnect fabrics are examined in the context of state-of-the-art HPC systems, which currently operate near the 1 GFLOPS/W level. The analysis suggests that conventional metal trace interconnects will limit performance to approximately 6 GFLOPS/W in larger HPC systems that require many computer chips to be interconnected in parallel processing architectures. As the HPC communications bottlenecks push closer to the processing chips, integrated Optical Interconnect (OI) technology may provide the ultra-high bandwidths needed at the inter- and intra-chip levels. With inter-chip photonic link energies projected to be less than 1 pJ/bit, integrated OI is projected to enable HPC architecture scaling to the 50 GFLOPS/W level and beyond - providing a path to Peta-FLOPS-level HPC within a single rack, and potentially even Exa-FLOPSlevel HPC for large systems. A new hybrid integrated chip-scale OI approach is described and evaluated. The concept integrates a high-density polymer waveguide fabric directly on top of a multiple quantum well (MQW) modulator array that is area-bonded to the Silicon computing chip. Grayscale lithography is used to fabricate 5 μm x 5 μm polymer waveguides and associated novel small-footprint total internal reflection-based vertical input/output couplers directly onto a layer containing an array of GaAs MQW devices configured to be either absorption modulators or photodetectors. An external continuous wave optical "power supply" is coupled into the waveguide links. Contrast ratios were measured using a test rider chip in place of a Silicon processing chip. The results suggest that sub-pJ/b chip-scale communication is achievable with this concept. When integrated into high-density integrated optical interconnect fabrics, it could provide a seamless interconnect fabric spanning the intra-

Reliability of high I/O high density CCGA interconnect electronic packages under extreme thermal environments

NASA Astrophysics Data System (ADS)

Ramesham, Rajeshuni

2012-03-01

Ceramic column grid array (CCGA) packages have been increasing in use based on their advantages such as high interconnect density, very good thermal and electrical performances, compatibility with standard surfacemount packaging assembly processes, and so on. CCGA packages are used in space applications such as in logic and microprocessor functions, telecommunications, payload electronics, and flight avionics. As these packages tend to have less solder joint strain relief than leaded packages or more strain relief over lead-less chip carrier packages, the reliability of CCGA packages is very important for short-term and long-term deep space missions. We have employed high density CCGA 1152 and 1272 daisy chained electronic packages in this preliminary reliability study. Each package is divided into several daisy-chained sections. The physical dimensions of CCGA1152 package is 35 mm x 35 mm with a 34 x 34 array of columns with a 1 mm pitch. The dimension of the CCGA1272 package is 37.5 mm x 37.5 mm with a 36 x 36 array with a 1 mm pitch. The columns are made up of 80% Pb/20%Sn material. CCGA interconnect electronic package printed wiring polyimide boards have been assembled and inspected using non-destructive x-ray imaging techniques. The assembled CCGA boards were subjected to extreme temperature thermal atmospheric cycling to assess their reliability for future deep space missions. The resistance of daisy-chained interconnect sections were monitored continuously during thermal cycling. This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions.

X-Ray Microdiffraction as a Probe to Reveal Flux Divergences in Interconnects

NASA Astrophysics Data System (ADS)

Spolenak, R.; Tamura, N.; Patel, J. R.

2006-02-01

Most reliability issues in interconnect systems occur at a local scale and many of them include the local build-up of stresses. Typical failure mechanisms are electromigration and stress voiding in interconnect lines and fatigue in surface acoustic wave devices. Thus a local probe is required for the investigation of these phenomena. In this paper the application of the Laue microdiffraction technique to investigate flux divergences in interconnect systems will be described. The deviatoric strain tensor of single grains can be correlated with the local microstructure, orientation and defect density. Especially the latter led to recent results about the correlation of stress build-up and orientation in Cu lines and electromigration-induced grain rotation in Cu and Al lines.

Superconducting Multilayer High-Density Flexible Printed Circuit Board for Very High Thermal Resistance Interconnections

NASA Astrophysics Data System (ADS)

de la Broïse, Xavier; Le Coguie, Alain; Sauvageot, Jean-Luc; Pigot, Claude; Coppolani, Xavier; Moreau, Vincent; d'Hollosy, Samuel; Knarosovski, Timur; Engel, Andreas

2018-05-01

We have successively developed two superconducting flexible PCBs for cryogenic applications. The first one is monolayer, includes 552 tracks (10 µm wide, 20 µm spacing), and receives 24 wire-bonded integrated circuits. The second one is multilayer, with one track layer between two shielding layers interconnected by microvias, includes 37 tracks, and can be interconnected at both ends by wire bonding or by connectors. The first cold measurements have been performed and show good performances. The novelty of these products is, for the first one, the association of superconducting materials with very narrow pitch and bonded integrated circuits and, for the second one, the introduction of a superconducting multilayer structure interconnected by vias which is, to our knowledge, a world-first.

The effect of an imposed current on the creep of tin silver copper interconnects

NASA Astrophysics Data System (ADS)

Kinney, Christopher Charles

There has been substantial work done on the properties of solder interconnects due to the global transition to lead free electronics. These interconnects create an electrical connection, which current will pass through for much of the interconnects' lifespan. As such, it is imperative in the testing of any solder alloy to examine the mechanical, thermal, and microstructural behavior of the interconnect while it is under an imposed current. The imposed current drives several internal effects that may impact the behavior of the interconnect; creating a complicated state within the interconnect. This thesis is the first study of the couple between current and mechanical properties of these interconnects. Idealized SnAgCu interconnects were made consisting of double-shear specimens that contained paired solder joints, 400x400mum in cross-section, 200mum in thickness on a Cu substrate. Different representative microstructures were prepared by pre-treating the interconnects via electromigration and isothermal aging. Samples were tested with and without an imposed current, and at a variety of temperatures. These tests consistently yielded two unexpected results. First, the relative increase in creep rate, for a given imposed current, is nearly the same over a range of temperatures and starting microstructures. Second, when tests are done at equivalent temperatures (to compensate for Joule heating) the creep rate is lower when under an imposed current than under isothermal conditions. To explain this phenomena, internal gradients within the interconnects were investigated. The temperature profile was shown to be constant at a given current density. Given constant temperature, and a microstructure that includes interfacial voids, the effect of the imposed current on the vacancy concentration was examined. It was found that the current depletes the joint of vacancies, lowering the average creep rate, and introducing observable heterogeneities in the creep pattern. This result was also found to be dependant on the specific locations of the voids, which act as vacancy sources or sinks. The usual Dom equation then provides a very useful basis for evaluating the change of creep rate with current. Actual microelectronic devices were also examined under an imposed current. Due to the complex geometry and composition of the samples, lower current densities were necessitated. As such, current induced effects were lessened, yet comparisons show similar behavior to the idealized interconnects. Our idealized model was applied to these devices, and yielded activation energies consistent with previous data. Finally, lifetime reliability projections were made for use in the future design of lead free microelectronic devices.

Operational parameters of an opto-electronic neural network employing fixed planar holographic interconnects

NASA Astrophysics Data System (ADS)

Keller, P. E.; Gmitro, A. F.

1993-07-01

A prototype neutral network system of multifaceted, planar interconnection holograms and opto-electronic neurons is analyzed. This analysis shows that a hologram fabricated with electron-beam lithography has the capacity to connect 6700 neuron outputs to 6700 neuron inputs, and that, the encoded synaptic weights have a precision of approximately 5 bits. Higher interconnection densities can be achieved by accepting a lower synaptic weight accuracy. For systems employing laser diodes at the outputs of the neurons, processing rates in the range of 45 to 720 trillion connections per second can potentially be achieved.

Reliability of High I/O High Density CCGA Interconnect Electronic Packages under Extreme Thermal Environment

NASA Technical Reports Server (NTRS)

Ramesham, Rajeshuni

2012-01-01

This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions. Ceramic column grid array (CCGA) packages have been increasing in use based on their advantages such as high interconnect density, very good thermal and electrical performances, compatibility with standard surface-mount packaging assembly processes, and so on. CCGA packages are used in space applications such as in logic and microprocessor functions, telecommunications, payload electronics, and flight avionics. As these packages tend to have less solder joint strain relief than leaded packages or more strain relief over lead-less chip carrier packages, the reliability of CCGA packages is very important for short-term and long-term deep space missions. We have employed high density CCGA 1152 and 1272 daisy chained electronic packages in this preliminary reliability study. Each package is divided into several daisy-chained sections. The physical dimensions of CCGA1152 package is 35 mm x 35 mm with a 34 x 34 array of columns with a 1 mm pitch. The dimension of the CCGA1272 package is 37.5 mm x 37.5 mm with a 36 x 36 array with a 1 mm pitch. The columns are made up of 80% Pb/20%Sn material. CCGA interconnect electronic package printed wiring polyimide boards have been assembled and inspected using non-destructive x-ray imaging techniques. The assembled CCGA boards were subjected to extreme temperature thermal atmospheric cycling to assess their reliability for future deep space missions. The resistance of daisy-chained interconnect sections were monitored continuously during thermal cycling. This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions. Keywords: Extreme temperatures, High density CCGA qualification, CCGA reliability, solder joint failures, optical inspection, and x-ray inspection.

Associations between Caries among Children and Household Sugar Procurement, Exposure to Fluoridated Water and Socioeconomic Indicators in the Brazilian Capital Cities

PubMed Central

Gonçalves, Michele Martins; Leles, Cláudio Rodrigues; Freire, Maria do Carmo Matias

2013-01-01

The objective of this ecological study was to investigate the association between caries experience in 5- and 12-year-old Brazilian children in 2010 and household sugar procurement in 2003 and the effects of exposure to water fluoridation and socioeconomic indicators. Sample units were all 27 Brazilian capital cities. Data were obtained from the National Surveys of Oral Health; the National Household Food Budget Survey; and the United Nations Program for Development. Data analysis included correlation coefficients, exploratory factor analysis, and linear regression. There were significant negative associations between caries experience and procurement of confectionery, fluoridated water, HDI, and per capita income. Procurement of confectionery and soft drinks was positively associated with HDI and per capita income. Exploratory factor analysis grouped the independent variables by reducing highly correlated variables into two uncorrelated component variables that explained 86.1% of total variance. The first component included income, HDI, water fluoridation, and procurement of confectionery, while the second included free sugar and procurement of soft drinks. Multiple regression analysis showed that caries is associated with the first component. Caries experience was associated with better socioeconomic indicators of a city and exposure to fluoridated water, which may affect the impact of sugars on the disease. PMID:24307900

Inhibition of Major Drug Metabolizing CYPs by Common Herbal Medicines used by HIV/AIDS Patients in Africa– Implications for Herb-Drug Interactions

PubMed Central

Awortwe, Charles; Bouic, Patrick J.; Masimirembwa, Collen M.; Rosenkranz, Bernd

2015-01-01

The purpose of this study was to evaluate the potential risk of common herbal medicines used by HIV-infected patients in Africa for herb-drug interactions (HDI). High throughput screening assays consisting of recombinant Cytochrome P450 enzymes (CYPs) and fluorescent probes, and parallel artificial membrane permeability assays (PAMPA) were used. The potential of herbal medicines to cause HDI was ranked according to FDA guidelines for reversible inhibition and categorization of time dependent inhibition was based on the normalized ratio. CYPs 1A2 and 3A4 were most inhibited by the herbal extracts. H. hemerocallidea (IC50 = 0.63 μg/mL and 58 μg/mL) and E. purpurea (IC50 = 20 μg/mL and 12 μg/mL) were the potent inhibitors of CYPs 1A2 and 3A4 respectively. L. frutescens and H. hemerocallidea showed clear time dependent inhibition on CYP3A4. Furthermore, the inhibitory effect of both H. hemerocallidea and L. frutescens before and after PAMPA were identical. The results indicate potential HDI of H. hemerocallidea, L. frutescens and E. purpurea with substrates of the affected enzymes if maximum in vivo concentration is achieved. PMID:24475926

Exploration of operator method digital optical computers for application to NASA

NASA Technical Reports Server (NTRS)

1990-01-01

Digital optical computer design has been focused primarily towards parallel (single point-to-point interconnection) implementation. This architecture is compared to currently developing VHSIC systems. Using demonstrated multichannel acousto-optic devices, a figure of merit can be formulated. The focus is on a figure of merit termed Gate Interconnect Bandwidth Product (GIBP). Conventional parallel optical digital computer architecture demonstrates only marginal competitiveness at best when compared to projected semiconductor implements. Global, analog global, quasi-digital, and full digital interconnects are briefly examined as alternative to parallel digital computer architecture. Digital optical computing is becoming a very tough competitor to semiconductor technology since it can support a very high degree of three dimensional interconnect density and high degrees of Fan-In without capacitive loading effects at very low power consumption levels.

Probabilistic immortality of Cu damascene interconnects

NASA Astrophysics Data System (ADS)

Hau-Riege, Stefan P.

2002-02-01

We have studied electromigration short-line effects in Cu damascene interconnects through experiments on lines of various lengths L, stressed at a variety of current densities j, and embedded in different dielectric materials. We observed two modes of resistance evolution: Either the resistance of the lines remains constant for the duration of the test, so that the lines are considered immortal, or the lines fail due to abrupt open-circuit failure. The resistance was not observed to gradually increase and then saturate, as commonly observed in Al-based interconnects, because the barrier is too thin and resistive to serve as a redundant current path should voiding occur. The critical stress for void nucleation was found to be smaller than 41 MPa, since voiding occurred even under the mildest test conditions of j=2 MA/cm2 and L=10.5 μm at 300 °C. A small fraction of short Cu lines failed even at low current densities, which deems necessary a concept of probabilistic immortality rather than deterministic immortality. Experiments and modeling suggest that the probability of immortality is described by (jL2/B), where B is the effective elastic modulus of the metallization scheme. By contrast, the immortality of Al-based interconnects with shunt layers is described by (jL) if no voids nucleate, and (jL/B) if voids do nucleate. Even though the phenomenology of short-line effects differs for Al- and Cu-based interconnects, the immortality of interconnects of either materials system can be explained by the phenomena of nucleation barriers for void formation and void-growth saturation. The differences are due solely to the absence of a shunt layer and the low critical stress for void nucleation in the case of Cu.

Global Inequalities in Cervical Cancer Incidence and Mortality are Linked to Deprivation, Low Socioeconomic Status, and Human Development

PubMed Central

Singh, Gopal K.; Azuine, Romuladus E.; Siahpush, Mohammad

2012-01-01

Objectives This study examined global inequalities in cervical cancer incidence and mortality rates as a function of cross-national variations in the Human Development Index (HDI), socioeconomic factors, Gender Inequality Index (GII), and healthcare expenditure. Methods Age-adjusted incidence and mortality rates were calculated for women in 184 countries using the 2008 GLOBOCAN database, and incidence and mortality trends were analyzed using the WHO cancer mortality database. Log-linear regression was used to model annual trends, while OLS and Poisson regression models were used to estimate the impact of socioeconomic and human development factors on incidence and mortality rates. Results Cervical cancer incidence and mortality rates varied widely, with many African countries such as Guinea, Zambia, Comoros, Tanzania, and Malawi having at least 10-to-20-fold higher rates than several West Asian, Middle East, and European countries, including Iran, Saudi Arabia, Syria, Egypt, and Switzerland. HDI, GII, poverty rate, health expenditure per capita, urbanization, and literacy rate were all significantly related to cervical cancer incidence and mortality, with HDI and poverty rate each explaining >52% of the global variance in mortality. Both incidence and mortality rates increased in relation to lower human development and higher gender inequality levels. A 0.2 unit increase in HDI was associated with a 20% decrease in cervical cancer risk and a 33% decrease in cervical cancer mortality risk. The risk of a cervical cancer diagnosis increased by 24% and of cervical cancer death by 42% for a 0.2 unit increase in GII. Higher health expenditure levels were independently associated with decreased incidence and mortality risks. Conclusions and Public Health Implications Global inequalities in cervical cancer are clearly linked to disparities in human development, social inequality, and living standards. Reductions in cervical cancer rates are achievable by reducing inequalities in socioeconomic conditions, availability of preventive health services, and women’s social status. PMID:27621956

Accuracy and precision of four value-added blood glucose meters: the Abbott Optium, the DDI Prodigy, the HDI True Track, and the HypoGuard Assure Pro.

PubMed

Sheffield, Catherine A; Kane, Michael P; Bakst, Gary; Busch, Robert S; Abelseth, Jill M; Hamilton, Robert A

2009-09-01

This study compared the accuracy and precision of four value-added glucose meters. Finger stick glucose measurements in diabetes patients were performed using the Abbott Diabetes Care (Alameda, CA) Optium, Diagnostic Devices, Inc. (Miami, FL) DDI Prodigy, Home Diagnostics, Inc. (Fort Lauderdale, FL) HDI True Track Smart System, and Arkray, USA (Minneapolis, MN) HypoGuard Assure Pro. Finger glucose measurements were compared with laboratory reference results. Accuracy was assessed by a Clarke error grid analysis (EGA), a Parkes EGA, and within 5%, 10%, 15%, and 20% of the laboratory value criteria (chi2 analysis). Meter precision was determined by calculating absolute mean differences in glucose values between duplicate samples (Kruskal-Wallis test). Finger sticks were obtained from 125 diabetes patients, of which 90.4% were Caucasian, 51.2% were female, 83.2% had type 2 diabetes, and average age of 59 years (SD 14 years). Mean venipuncture blood glucose was 151 mg/dL (SD +/-65 mg/dL; range, 58-474 mg/dL). Clinical accuracy by Clarke EGA was demonstrated in 94% of Optium, 82% of Prodigy, 61% of True Track, and 77% of the Assure Pro samples (P < 0.05 for Optium and True Track compared to all others). By Parkes EGA, the True Track was significantly less accurate than the other meters. Within 5% accuracy was achieved in 34%, 24%, 29%, and 13%, respectively (P < 0.05 for Optium, Prodigy, and Assure Pro compared to True Track). Within 10% accuracy was significantly greater for the Optium, Prodigy, and Assure Pro compared to True Track. Significantly more Optium results demonstrated within 15% and 20% accuracy compared to the other meter systems. The HDI True Track was significantly less precise than the other meter systems. The Abbott Optium was significantly more accurate than the other meter systems, whereas the HDI True Track was significantly less accurate and less precise compared to the other meter systems.

Biosphere as a complex life-support system (LSS) for human civilization

NASA Astrophysics Data System (ADS)

Pechurkin, Nickolay

As a continuously growing link of the Biosphere, we should keep in mind that biotic cycles induced by flows of a solar energy are the source of Biosphere and ecosystems functioning. Our pressure on the Biosphere which is connected with biotic cycle’s alterations and damages is menacingly growing. There are innumerable examples of atmosphere, water and soil pollution. We have contaminated even Earth-Space orbits with different uncontrolled debris. Ecological Footprint (EF) is a proper quantitative measure of anthropogenic impact on the Biosphere and ecosystems functioning. The comparative dynamics of the United Nations’ Human Development Index (HDI) and Ecological Footprint (EF) is discussed in the paper. The main call of sustainable development of mankind: all humans can have opportunity to fulfill their lives without degrading the Biosphere. To support sustainability, we should make an effort to develop each nation and the mankind as a whole with a high HDI and with a low ecological footprint. It means: to have high level of HDI at low level of EF. But current tendency of economical and social development shows: the higher HDI, the bigger EF. EF of mankind is rising threateningly. Now actual pressure of the human civilization of our planet (2014) upon 60 % exceeds its potential possibilities (biological capacity, measured as the area of "global" green hectares). It means that now we require more than 1.5 planets of the Earth’s type for sustainable development. It leads to ecological incident in the scale of Biosphere. Our Biosphere is the large, multilevel, hierarchically organized system, and our civilization is only a part of it. This part is not central; it can disappear for ever, if we do not cope to be included in the Biosphere as a great complex system. An example of Krasnoyarsk region as a representative region with high level of industry and technological energy production is considered in the paper. This work was supported by the Russian Foundation for Basic Research, project number 13-06-00060.

Alcoholic Beverage Preference and Dietary Habits in Elderly across Europe: Analyses within the Consortium on Health and Ageing: Network of Cohorts in Europe and the United States (CHANCES) Project

PubMed Central

Sluik, Diewertje; Jankovic, Nicole; O’Doherty, Mark G.; Geelen, Anouk; Schöttker, Ben; Rolandsson, Olov; Kiefte-de Jong, Jessica C.; Ferrieres, Jean; Bamia, Christina; Fransen, Heidi P.; Boer, Jolanda M. A.; Eriksson, Sture; Martínez, Begoña; Huerta, José María; Kromhout, Daan; de Groot, Lisette C. P. G. M.; Franco, Oscar H.; Trichopoulou, Antonia; Boffetta, Paolo; Kee, Frank; Feskens, Edith J. M.

2016-01-01

Introduction The differential associations of beer, wine, and spirit consumption on cardiovascular risk found in observational studies may be confounded by diet. We described and compared dietary intake and diet quality according to alcoholic beverage preference in European elderly. Methods From the Consortium on Health and Ageing: Network of Cohorts in Europe and the United States (CHANCES), seven European cohorts were included, i.e. four sub-cohorts from EPIC-Elderly, the SENECA Study, the Zutphen Elderly Study, and the Rotterdam Study. Harmonized data of 29,423 elderly participants from 14 European countries were analyzed. Baseline data on consumption of beer, wine, and spirits, and dietary intake were collected with questionnaires. Diet quality was assessed using the Healthy Diet Indicator (HDI). Intakes and scores across categories of alcoholic beverage preference (beer, wine, spirit, no preference, non-consumers) were adjusted for age, sex, socio-economic status, self-reported prevalent diseases, and lifestyle factors. Cohort-specific mean intakes and scores were calculated as well as weighted means combining all cohorts. Results In 5 of 7 cohorts, persons with a wine preference formed the largest group. After multivariate adjustment, persons with a wine preference tended to have a higher HDI score and intake of healthy foods in most cohorts, but differences were small. The weighted estimates of all cohorts combined revealed that non-consumers had the highest fruit and vegetable intake, followed by wine consumers. Non-consumers and persons with no specific preference had a higher HDI score, spirit consumers the lowest. However, overall diet quality as measured by HDI did not differ greatly across alcoholic beverage preference categories. Discussion This study using harmonized data from ~30,000 elderly from 14 European countries showed that, after multivariate adjustment, dietary habits and diet quality did not differ greatly according to alcoholic beverage preference. PMID:27548323

The incidence and mortality of lung cancer and their relationship to development in Asia

PubMed Central

Pakzad, Reza; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Pakzad, Iraj

2015-01-01

Background Lung cancer is the deadliest cancer worldwide and the most common cancer in Asia. It is necessary to get information on epidemiology and inequalities related to incidence and mortality of the cancer to use for planning and further research. This study aimed to investigate epidemiology and inequality of incidence and mortality from lung cancer in Asia. Methods The study was conducted based on data from the world data of cancer and the World Bank [including the Human Development Index (HDI) and its components]. The incidence and mortality rates, and cancer distribution maps were drawn for Asian countries. To analyze data, correlation test between incidence and death rates, and HDI and its components at significant was used in the significant level of 0.05 using SPSS software. Results A total of 1,033,881 incidence (71.13% were males and 28.87% were females. Sex ratio was 2.46) and 936,051 death (71.45% in men and 28.55% in women. The sex ratio was 2.50) recorded in Asian countries in 2012. Five countries with the highest standardized incidence and mortality rates of lung cancer were Democratic Republic of Korea, China, Armenia, Turkey, and Timor-Leste, respectively. Correlation between HDI and standardized incidence rate was 0.345 (P=0.019), in men 0.301 (P=0.042) and in women 0.3 (P=0.043); also between HDI and standardized mortality rate 0.289 (P=0.052), in men 0.265 (P=0.075) and in women 0.200 (P=0.182). Conclusions The incidence of lung cancer has been increasing in Asia. It is high in men. Along with development, the incidence and mortality from lung cancer increases. It seems necessary to study reasons and factors of increasing the incidence and mortality of lung cancer in Asian countries. PMID:26798586

Global Inequalities in Cervical Cancer Incidence and Mortality are Linked to Deprivation, Low Socioeconomic Status, and Human Development.

PubMed

Singh, Gopal K; Azuine, Romuladus E; Siahpush, Mohammad

2012-01-01

This study examined global inequalities in cervical cancer incidence and mortality rates as a function of cross-national variations in the Human Development Index (HDI), socioeconomic factors, Gender Inequality Index (GII), and healthcare expenditure. Age-adjusted incidence and mortality rates were calculated for women in 184 countries using the 2008 GLOBOCAN database, and incidence and mortality trends were analyzed using the WHO cancer mortality database. Log-linear regression was used to model annual trends, while OLS and Poisson regression models were used to estimate the impact of socioeconomic and human development factors on incidence and mortality rates. Cervical cancer incidence and mortality rates varied widely, with many African countries such as Guinea, Zambia, Comoros, Tanzania, and Malawi having at least 10-to-20-fold higher rates than several West Asian, Middle East, and European countries, including Iran, Saudi Arabia, Syria, Egypt, and Switzerland. HDI, GII, poverty rate, health expenditure per capita, urbanization, and literacy rate were all significantly related to cervical cancer incidence and mortality, with HDI and poverty rate each explaining >52% of the global variance in mortality. Both incidence and mortality rates increased in relation to lower human development and higher gender inequality levels. A 0.2 unit increase in HDI was associated with a 20% decrease in cervical cancer risk and a 33% decrease in cervical cancer mortality risk. The risk of a cervical cancer diagnosis increased by 24% and of cervical cancer death by 42% for a 0.2 unit increase in GII. Higher health expenditure levels were independently associated with decreased incidence and mortality risks. Global inequalities in cervical cancer are clearly linked to disparities in human development, social inequality, and living standards. Reductions in cervical cancer rates are achievable by reducing inequalities in socioeconomic conditions, availability of preventive health services, and women's social status.

Dermal, inhalation, and internal exposure to 1,6-HDI and its oligomers in car body repair shop workers and industrial spray painters.

PubMed

Pronk, A; Yu, F; Vlaanderen, J; Tielemans, E; Preller, L; Bobeldijk, I; Deddens, J A; Latza, U; Baur, X; Heederik, D

2006-09-01

To study inhalation and dermal exposure to hexamethylene diisocyanate (HDI) and its oligomers as well as personal protection equipment (PPE) use during task performance in conjunction with urinary hexamethylene diamine (HDA) in car body repair shop workers and industrial spray painters. Personal task based inhalation samples (n = 95) were collected from six car body repair shops and five industrial painting companies using impingers with di-n-butylamine (DBA) in toluene. In parallel, dermal exposure was assessed using nitril rubber gloves. Gloves were submerged into DBA in toluene after sampling. Analysis for HDI and its oligomers was performed by LC-MS/MS. Urine samples were collected from 55 workers (n = 291) and analysed for HDA by GC-MS. Inhalation exposure was strongly associated with tasks during which aerosolisation occurs. Dermal exposure occurred during tasks that involve direct handling of paint. In car body repair shops associations were found between detectable dermal exposure and glove use (odds ratio (OR) 0.22, 95% confidence interval (CI) 0.09 to 0.57) and inhalation exposure level (OR 1.34, 95% CI 0.97 to 1.84 for a 10-fold increase). HDA in urine could be demonstrated in 36% and 10% of car body repair shop workers and industrial painting company workers respectively. In car body repair shops, the frequency of detectable HDA was significantly elevated at the end of the working day (OR 2.13, 95% CI 1.07 to 4.22 for 3-6 pm v 0-8 am). In both branches HDA was detected in urine of approximately 25% of the spray painters. In addition HDA was detected in urine of a large proportion of non-spray painters in car body repair shops. Although (spray) painting with lacquers containing isocyanate hardeners results in the highest external exposures to HDI and oligomers, workers that do not perform paint related tasks may also receive a considerable internal dose.

Demonstration of fully enabled data center subsystem with embedded optical interconnect

NASA Astrophysics Data System (ADS)

Pitwon, Richard; Worrall, Alex; Stevens, Paul; Miller, Allen; Wang, Kai; Schmidtke, Katharine

2014-03-01

The evolution of data storage communication protocols and corresponding in-system bandwidth densities is set to impose prohibitive cost and performance constraints on future data storage system designs, fuelling proposals for hybrid electronic and optical architectures in data centers. The migration of optical interconnect into the system enclosure itself can substantially mitigate the communications bottlenecks resulting from both the increase in data rate and internal interconnect link lengths. In order to assess the viability of embedding optical links within prevailing data storage architectures, we present the design and assembly of a fully operational data storage array platform, in which all internal high speed links have been implemented optically. This required the deployment of mid-board optical transceivers, an electro-optical midplane and proprietary pluggable optical connectors for storage devices. We present the design of a high density optical layout to accommodate the midplane interconnect requirements of a data storage enclosure with support for 24 Small Form Factor (SFF) solid state or rotating disk drives and the design of a proprietary optical connector and interface cards, enabling standard drives to be plugged into an electro-optical midplane. Crucially, we have also modified the platform to accommodate longer optical interconnect lengths up to 50 meters in order to investigate future datacenter architectures based on disaggregation of modular subsystems. The optically enabled data storage system has been fully validated for both 6 Gb/s and 12 Gb/s SAS data traffic conveyed along internal optical links.

Immortality of Cu damascene interconnects

NASA Astrophysics Data System (ADS)

Hau-Riege, Stefan P.

2002-04-01

We have studied short-line effects in fully-integrated Cu damascene interconnects through electromigration experiments on lines of various lengths and embedded in different dielectric materials. We compare these results with results from analogous experiments on subtractively-etched Al-based interconnects. It is known that Al-based interconnects exhibit three different behaviors, depending on the magnitude of the product of current density, j, and line length, L: For small values of (jL), no void nucleation occurs, and the line is immortal. For intermediate values, voids nucleate, but the line does not fail because the current can flow through the higher-resistivity refractory-metal-based shunt layers. Here, the resistance of the line increases but eventually saturates, and the relative resistance increase is proportional to (jL/B), where B is the effective elastic modulus of the metallization system. For large values of (jL/B), voiding leads to an unacceptably high resistance increase, and the line is considered failed. By contrast, we observed only two regimes for Cu-based interconnects: Either the resistance of the line stays constant during the duration of the experiment, and the line is considered immortal, or the line fails due to an abrupt open-circuit failure. The absence of an intermediate regime in which the resistance saturates is due to the absence of a shunt layer that is able to support a large amount of current once voiding occurs. Since voids nucleate much more easily in Cu- than in Al-based interconnects, a small fraction of short Cu lines fails even at low current densities. It is therefore more appropriate to consider the probability of immortality in the case of Cu rather than assuming a sharp boundary between mortality and immortality. The probability of immortality decreases with increasing amount of material depleted from the cathode, which is proportional to (jL2/B) at steady state. By contrast, the immortality of Al-based interconnects is described by (jL) if no voids nucleate, and (jL/B) if voids nucleate.

Epidemiology, Incidence and Mortality of Bladder Cancer and their Relationship with the Development Index in the World.

PubMed

Mahdavifar, Neda; Ghoncheh, Mahshid; Pakzad, Reza; Momenimovahed, Zohre; Salehiniya, Hamid

2016-01-01

Bladder cancer is an international public health problem. It is the ninth most common cancer and the fourteenth leading cause of death due to cancer worldwide. Given aging populations, the incidence of this cancer is rising. Information on the incidence and mortality of the disease, and their relationship with level of economic development is essential for better planning. The aim of the study was to investigate bladder cancer incidence and mortality rates, and their relationship with the the Human Development Index (HDI) in the world. Data were obtained from incidence and mortality rates presented by GLOBOCAN in 2012. Data on HDI and its components were extracted from the global bank site. The number and standardized incidence and mortality rates were reported by regions and the distribution of the disease were drawn in the world. For data analysis, the relationship between incidence and death rates, and HDI and its components was measured using correlation coefficients and SPSS software. The level of significance was set at 0.05. In 2012, 429,793 bladder cancer cases and 165,084 bladder death cases occurred in the world. Five countries that had the highest age-standardized incidence were Belgium 17.5 per 100,000, Lebanon 16.6/100,000, Malta 15.8/100,000, Turkey 15.2/100,000, and Denmark 14.4/100,000. Five countries that had the highest age-standardized death rates were Turkey 6.6 per 100,000, Egypt 6.5/100,000, Iraq 6.3/100,000, Lebanon 6.3/100,000, and Mali 5.2/100,000. There was a positive linear relationship between the standardized incidence rate and HDI (r=0.653, P<0.001), so that there was a positive correlation between the standardized incidence rate with life expectancy at birth, average years of schooling, and the level of income per person of population. A positive linear relationship was also noted between the standardized mortality rate and HDI (r=0.308, P<0.001). There was a positive correlation between the standardized mortality rate with life expectancy at birth, average years of schooling, and the level of income per person of population. The incidence of bladder cancer in developed countries and parts of Africa was higher, while the highest mortality rate was observed in the countries of North Africa and the Middle East. The program for better treatment in developing countries to reduce mortality from the cancer and more detaiuled studies on the etiology of are essential.

A Thermal Model for Carbon Nanotube Interconnects

PubMed Central

Mohsin, Kaji Muhammad; Srivastava, Ashok; Sharma, Ashwani K.; Mayberry, Clay

2013-01-01

In this work, we have studied Joule heating in carbon nanotube based very large scale integration (VLSI) interconnects and incorporated Joule heating influenced scattering in our previously developed current transport model. The theoretical model explains breakdown in carbon nanotube resistance which limits the current density. We have also studied scattering parameters of carbon nanotube (CNT) interconnects and compared with the earlier work. For 1 µm length single-wall carbon nanotube, 3 dB frequency in S12 parameter reduces to ~120 GHz from 1 THz considering Joule heating. It has been found that bias voltage has little effect on scattering parameters, while length has very strong effect on scattering parameters. PMID:28348333

Recent patents on Cu/low-k dielectrics interconnects in integrated circuits.

PubMed

Jiang, Qing; Zhu, Yong F; Zhao, Ming

2007-01-01

In past decades, the development of microelectronics has moved along with constant speed of scaling to maximize transistor density as driven by the need for electrical and functional performance. For further development, the propagation velocity of electromagnetic waves becomes increasingly important due to their unyielding constraints on interconnect delay. To minimize it, it was forced to the introduction of the Cu/low-k dielectric interconnects to very large scale integrated circuits (VLSI) where k denotes the dielectric constant. In addition, reliable barrier structures, which are the thinnest part among the device parts to maximize space availability for the actual Cu IWs, are required to prevent penetration of different materials. In light of the above statements, this review will focus recent patents and some studies on Cu interconnects including Cu interconnect wires, low-k dielectrics and related barrier materials as well manufacturing techniques in VLSI, which are one of the most essential concerns in microelectronic industry and decides the further development of VLSI. In addition, possible future development in this field is considered.

The potential benefits of photonics in the computing platform

NASA Astrophysics Data System (ADS)

Bautista, Jerry

2005-03-01

The increase in computational requirements for real-time image processing, complex computational fluid dynamics, very large scale data mining in the health industry/Internet, and predictive models for financial markets are driving computer architects to consider new paradigms that rely upon very high speed interconnects within and between computing elements. Further challenges result from reduced power requirements, reduced transmission latency, and greater interconnect density. Optical interconnects may solve many of these problems with the added benefit extended reach. In addition, photonic interconnects provide relative EMI immunity which is becoming an increasing issue with a greater dependence on wireless connectivity. However, to be truly functional, the optical interconnect mesh should be able to support arbitration, addressing, etc. completely in the optical domain with a BER that is more stringent than "traditional" communication requirements. Outlined are challenges in the advanced computing environment, some possible optical architectures and relevant platform technologies, as well roughly sizing these opportunities which are quite large relative to the more "traditional" optical markets.

Multimode fiber for high-density optical interconnects

NASA Astrophysics Data System (ADS)

Bickham, Scott R.; Ripumaree, Radawan; Chalk, Julie A.; Paap, Mark T.; Hurley, William C.; McClure, Randy L.

2017-02-01

Data centers (DCs) are facing the challenge of delivering more capacity over longer distances. As line rates increase to 25 Gb/s and higher, DCs are being challenged with signal integrity issues due to the long electrical traces that require retiming. In addition, the density of interconnects on the front panel is limited by the size and power dissipation requirements of the pluggable modules. One proposal to overcome these issues is to use embedded optical transceivers in which optical fibers are used to transport data to and from the front panel. These embedded modules will utilize arrays of VCSEL or silicon-photonic transceivers, and in both cases, the capacity may be limited by the density of the optical connections on the chip. To address this constraint, we have prototyped optical fibers in which the glass and coating diameters are reduced to 80 and 125 microns, respectively. These smaller diameters enable twice as many optical interconnects in the same footprint, and this in turn will allow the transceiver arrays to be collinearly located on small chips with dimensions on the order of (5x5mm2)1,2. We have also incorporated these reduced diameter fibers into small, flexible 8-fiber ribbon cables which can simplify routing constraints inside modules and optical backplanes.

Si photonics technology for future optical interconnection

NASA Astrophysics Data System (ADS)

Zheng, Xuezhe; Krishnamoorthy, Ashok V.

2011-12-01

Scaling of computing systems require ultra-efficient interconnects with large bandwidth density. Silicon photonics offers a disruptive solution with advantages in reach, energy efficiency and bandwidth density. We review our progress in developing building blocks for ultra-efficient WDM silicon photonic links. Employing microsolder based hybrid integration with low parasitics and high density, we optimize photonic devices on SOI platforms and VLSI circuits on more advanced bulk CMOS technology nodes independently. Progressively, we successfully demonstrated single channel hybrid silicon photonic transceivers at 5 Gbps and 10 Gbps, and 80 Gbps arrayed WDM silicon photonic transceiver using reverse biased depletion ring modulators and Ge waveguide photo detectors. Record-high energy efficiency of less than 100fJ/bit and 385 fJ/bit were achieved for the hybrid integrated transmitter and receiver, respectively. Waveguide grating based optical proximity couplers were developed with low loss and large optical bandwidth to enable multi-layer intra/inter-chip optical interconnects. Thermal engineering of WDM devices by selective substrate removal, together with WDM link using synthetic wavelength comb, we significantly improved the device tuning efficiency and reduced the tuning range. Using these innovative techniques, two orders of magnitude tuning power reduction was achieved. And tuning cost of only a few 10s of fJ/bit is expected for high data rate WDM silicon photonic links.

Electrochemical fabrication of interconnected tungsten bronze nanosheets for high performance supercapacitor

NASA Astrophysics Data System (ADS)

Yang, Gan; Liu, Xiao-Xia

2018-04-01

Interconnected H0.12WO3ṡH2O nanosheets with high electrochemical performances are fabricated on partial exfoliated graphite substrate (Ex-GF) by potential-limited pulse galvanostatic method (PLPG). The dead volume problem of bulk pesudocapacitive materials is addressed by the novel interconnected nanosheets structure, enabling a large specific capacitance of 5.95 F cm-2 (495.8 F g-1) at 2 mA cm-2. Merited from the fluent electrolyte penetration channels established by the plenty voids among nanosheets, as well as fast electron transportation in the electronic conductive tungsten bronze which is directly grown from graphite substrate, the obtained WO3/Ex-GF demonstrates excellent rate capability. The material can maintain 60.0% of its capacitance when the discharge current density increases from 2 to 100 mA cm-2. Moreover, WO3/Ex-GF doesn't show capacitance decay after 5000 galvanostatic charge-discharge cycles, displaying its super stability. Furthermore, a high performance asymmetric supercapacitor assembled by using WO3/Ex-GF and electrochemical fabricated MnO2/Ex-GF as negative and positive electrodes, respectively displays a high energy density of 2.88 mWh cm-3 at the power density of 11.1 mW cm-3, demonstrating its potential application for energy storage.

Simulations of stress evolution and the current density scaling of electromigration-induced failure times in pure and alloyed interconnects

NASA Astrophysics Data System (ADS)

Park, Young-Joon; Andleigh, Vaibhav K.; Thompson, Carl V.

1999-04-01

An electromigration model is developed to simulate the reliability of Al and Al-Cu interconnects. A polynomial expression for the free energy of solution by Murray [Int. Met. Rev. 30, 211 (1985)] was used to calculate the chemical potential for Al and Cu while the diffusivities were defined based on a Cu-trapping model by Rosenberg [J. Vac. Sci. Technol. 9, 263 (1972)]. The effects of Cu on stress evolution and lifetime were investigated in all-bamboo and near-bamboo stud-to-stud structures. In addition, the significance of the effect of mechanical stress on the diffusivity of both Al and Cu was determined in all-bamboo and near-bamboo lines. The void nucleation and growth process was simulated in 200 μm, stud-to-stud lines. Current density scaling behavior for void-nucleation-limited failure and void-growth-limited failure modes was simulated in long, stud-to-stud lines. Current density exponents of both n=2 for void nucleation and n=1 for void growth failure modes were found in both pure Al and Al-Cu lines. Limitations of the most widely used current density scaling law (Black's equation) in the analysis of the reliability of stud-to-stud lines are discussed. By modifying the input materials properties used in this model (when they are known), this model can be adapted to predict the reliability of other interconnect materials such as pure Cu and Cu alloys.

Untapped potential of health impact assessment.

PubMed

Winkler, Mirko S; Krieger, Gary R; Divall, Mark J; Cissé, Guéladio; Wielga, Mark; Singer, Burton H; Tanner, Marcel; Utzinger, Jürg

2013-04-01

The World Health Organization has promoted health impact assessment (HIA) for over 20 years. At the 2012 United Nations Conference on Sustainable Development (Rio+20), HIA was discussed as a critical method for linking health to "green economy" and "institutional framework" strategies for sustainable development. In countries having a high human development index (HDI), HIA has been added to the overall assessment suite that typically includes potential environmental and social impacts, but it is rarely required as part of the environmental and social impact assessment for large development projects. When they are performed, project-driven HIAs are governed by a combination of project proponent and multilateral lender performance standards rather than host country requirements. Not surprisingly, in low-HDI countries HIA is missing from the programme and policy arena in the absence of an external project driver. Major drivers of global change (e.g. population growth and urbanization, growing pressure on natural resources and climate change) inordinately affect low- and medium-HDI countries; however, in such countries HIA is conspicuously absent. If the cloak of HIA invisibility is to be removed, it must be shown that HIA is useful and beneficial and, hence, an essential component of the 21st century's sustainable development agenda. We analyse where and how HIA can become fully integrated into the impact assessment suite and argue that the impact of HIA must not remain obscure.

Untapped potential of health impact assessment

PubMed Central

Krieger, Gary R; Divall, Mark J; Cissé, Guéladio; Wielga, Mark; Singer, Burton H; Tanner, Marcel; Utzinger, Jürg

2013-01-01

Abstract The World Health Organization has promoted health impact assessment (HIA) for over 20 years. At the 2012 United Nations Conference on Sustainable Development (Rio+20), HIA was discussed as a critical method for linking health to “green economy” and “institutional framework” strategies for sustainable development. In countries having a high human development index (HDI), HIA has been added to the overall assessment suite that typically includes potential environmental and social impacts, but it is rarely required as part of the environmental and social impact assessment for large development projects. When they are performed, project-driven HIAs are governed by a combination of project proponent and multilateral lender performance standards rather than host country requirements. Not surprisingly, in low-HDI countries HIA is missing from the programme and policy arena in the absence of an external project driver. Major drivers of global change (e.g. population growth and urbanization, growing pressure on natural resources and climate change) inordinately affect low- and medium-HDI countries; however, in such countries HIA is conspicuously absent. If the cloak of HIA invisibility is to be removed, it must be shown that HIA is useful and beneficial and, hence, an essential component of the 21st century’s sustainable development agenda. We analyse where and how HIA can become fully integrated into the impact assessment suite and argue that the impact of HIA must not remain obscure. PMID:23599554

Socioeconomic disadvantage and schizophrenia in migrants under mental health detention orders.

PubMed

Bulla, Jan; Hoffmann, Klaus; Querengässer, Jan; Ross, Thomas

2017-09-01

Migrants with mental hospital orders according to section 63 of the German criminal code are overrepresented in relation to their numbers in the general population. Subgroups originating from certain world regions are diagnosed with schizophrenia at a much higher rate than others. In the present literature, there is a strong evidence for a substantial correlation between migration, social disadvantage and the prevalence of schizophrenia. This study investigates the relationship between countries of origin, the risk of becoming a forensic patient and the proportion of schizophrenia spectrum disorders. Data from a comprehensive evaluation tool of forensic inpatients in the German federal state of Baden-Württemberg (FoDoBa) were compared with population statistics and correlated with the Human Development Index (HDI) and Multidimensional Poverty Index (MPI). For residents with migration background, the risk ratio to receive a mental hospital order is 1.3 in comparison to non-migrants. There was a highly significant correlation between the HDI of the country of origin and the risk ratio for detention in a forensic psychiatric hospital. The proportion of schizophrenia diagnoses also correlated significantly with the HDI. In contrast, the MPI country rankings were not associated with schizophrenia diagnoses. Two lines of explanations are discussed: first, higher prevalence of schizophrenia in migrants originating from low-income countries, and second, a specific bias in court rulings with regard to involuntary forensic treatment orders for these migrant groups.

Spatio-Temporal Variation of Longevity Clusters and the Influence of Social Development Level on Lifespan in a Chinese Longevous Area (1982–2010)

PubMed Central

Qin, Jian; Xia, Tianlong; Li, You; Liang, Xue; Wei, Peng; Long, Bingshuang; Lei, Mingzhi; Wei, Xiao; Tang, Xianyan; Zhang, Zhiyong

2017-01-01

The study aims to determine the spatial and temporal variation of a longevous region and explore the correlation between longevity and socioeconomic development. Population data at the township level were obtained from the last four population censuses (1982–2010). Five main lifespan indicators and the Human Development Index (HDI) were calculated. Getis-Ord G*, Gravity modeling, and Pearson’s r between lifespan indicators and HDI were applied. In this study, a stable longevous gathering area was discovered in Hechi during different periods. Under the influence of social and economic development, more longevous areas appeared. However, the effects of genetic and natural environmental factors on longevity were always dominant in this remote and mountainous city. Furthermore, longevity indicators lacked any significant correlation with life expectancy. No significant positive correlation was detected between lifespan indicators and HDI. Thus, we conclude that lifespan indicators can determine the spatial distribution and variation pattern of longevity from multiple dimensions. The geographical scope of longevity in Hechi City is gradually expanding, and significant spatial clustering was detected in southwestern, southern, and eastern parts of Hechi. This study also found that social economic development is likely to have a certain impact on new longevous areas, but their role on extreme longevity is not significant. PMID:28753971

Multiscale free-space optical interconnects for intrachip global communication: motivation, analysis, and experimental validation.

PubMed

McFadden, Michael J; Iqbal, Muzammil; Dillon, Thomas; Nair, Rohit; Gu, Tian; Prather, Dennis W; Haney, Michael W

2006-09-01

The use of optical interconnects for communication between points on a microchip is motivated by system-level interconnect modeling showing the saturation of metal wire capacity at the global layer. Free-space optical solutions are analyzed for intrachip communication at the global layer. A multiscale solution comprising microlenses, etched compound slope microprisms, and a curved mirror is shown to outperform a single-scale alternative. Microprisms are designed and fabricated and inserted into an optical setup apparatus to experimentally validate the concept. The multiscale free-space system is shown to have the potential to provide the bandwidth density and configuration flexibility required for global communication in future generations of microchips.

Monolithic Interconnected Modules (MIMs) for Thermophotovoltaic Energy Conversion

NASA Technical Reports Server (NTRS)

Wilt, David; Wehrer, Rebecca; Palmisiano, Marc; Wanlass, Mark; Murray, Christopher

2003-01-01

Monolithic Interconnected Modules (MIM) are under development for thermophotovoltaic (TPV) energy conversion applications. MIM devices are typified by series-interconnected photovoltaic cells on a common, semi-insulating substrate and generally include rear-surface infrared (IR) reflectors. The MIM architecture is being implemented in InGaAsSb materials without semi-insulating substrates through the development of alternative isolation methodologies. Motivations for developing the MIM structure include: reduced resistive losses, higher output power density than for systems utilizing front surface spectral control, improved thermal coupling and ultimately higher system efficiency. Numerous design and material changes have been investigated since the introduction of the MIM concept in 1994. These developments as well as the current design strategies are addressed.

Microstructural characterization of ultra thin copper interconnects

NASA Astrophysics Data System (ADS)

Yang, Hee-Dong

The present study investigates the defects related to reliability issues, such as physical failures developed during processing and end use. In the first part of this study, kinetic analysis using the Johnson-Mehl-Avrami (JMA) model demonstrates that a self-annealing mechanism in electroplated Cu films depends on the film properties, such as thickness and the amount of crystal defects in an as-deposited state. In order to obtain the evidence of such defects, the microstructural characterization of defects in ultra thin copper interconnects using transmission electron microscopy (TEM) is presented. Examination of the defects using TEM reveals that voids filled with gas form as a lens shape along the {110} habit planes of the copper matrix. In the second part of this study, methodology and results of an electro-thermal-fatigue (ETF) testing, designed for early detection of process defects, are presented. Such ETF testing combines high-density current electrical stressing and thermal cycling to accelerate the evolution of defects in Cu interconnects. In ETF testing, the evolution of defects provides the nucleation sites for voids which open or close during thermal cycling. Then, the accumulation of voids creates the change in resistance when they reach a critical size. As a result of voids evolution, the high current density and high joule heating create a transient resistance increase. ETF testing reveals two failure modes, and the mode-I failure has the importance in detecting defects. The number of cycles to failure in ETF testing decreases with higher current density, but the rate of thermal cycling has no effect. Results from this investigation suggest that impurities in the copper electrodeposition process must be carefully controlled to achieve reliable ultra thin copper interconnects.

Thin-film chip-to-substrate interconnect and methods for making same

DOEpatents

Tuckerman, D.B.

1988-06-06

Integrated circuit chips are electrically connected to a silicon wafer interconnection substrate. Thin film wiring is fabricated down bevelled edges of the chips. A subtractive wire fabrication method uses a series of masks and etching steps to form wires in a metal layer. An additive method direct laser writes or deposits very thin lines which can then be plated up to form wires. A quasi-additive or subtractive/additive method forms a pattern of trenches to expose a metal surface which can nucleate subsequent electrolytic deposition of wires. Low inductance interconnections on a 25 micron pitch (1600 wires on a 1 cm square chip) can be produced. The thin film hybrid interconnect eliminates solder joints or welds, and minimizes the levels of metallization. Advantages include good electrical properties, very high wiring density, excellent backside contact, compactness, and high thermal and mechanical reliability. 6 figs.

Epidemic spreading between two coupled subpopulations with inner structures

NASA Astrophysics Data System (ADS)

Ruan, Zhongyuan; Tang, Ming; Gu, Changgui; Xu, Jinshan

2017-10-01

The structure of underlying contact network and the mobility of agents are two decisive factors for epidemic spreading in reality. Here, we study a model consisting of two coupled subpopulations with intra-structures that emphasizes both the contact structure and the recurrent mobility pattern of individuals simultaneously. We show that the coupling of the two subpopulations (via interconnections between them and round trips of individuals) makes the epidemic threshold in each subnetwork to be the same. Moreover, we find that the interconnection probability between two subpopulations and the travel rate are important factors for spreading dynamics. In particular, as a function of interconnection probability, the epidemic threshold in each subpopulation decreases monotonously, which enhances the risks of an epidemic. While the epidemic threshold displays a non-monotonic variation as travel rate increases. Moreover, the asymptotic infected density as a function of travel rate in each subpopulation behaves differently depending on the interconnection probability.

Thin-film chip-to-substrate interconnect and methods for making same

DOEpatents

Tuckerman, David B.

1991-01-01

Integrated circuit chips are electrically connected to a silica wafer interconnection substrate. Thin film wiring is fabricated down bevelled edges of the chips. A subtractive wire fabrication method uses a series of masks and etching steps to form wires in a metal layer. An additive method direct laser writes or deposits very thin metal lines which can then be plated up to form wires. A quasi-additive or subtractive/additive method forms a pattern of trenches to expose a metal surface which can nucleate subsequent electrolytic deposition of wires. Low inductance interconnections on a 25 micron pitch (1600 wires on a 1 cm square chip) can be produced. The thin film hybrid interconnect eliminates solder joints or welds, and minimizes the levels of metallization. Advantages include good electrical properties, very high wiring density, excellent backside contact, compactness, and high thermal and mechanical reliability.

Reliability and Characteristics of Wafer-Level Chip-Scale Packages under Current Stress

NASA Astrophysics Data System (ADS)

Chen, Po-Ying; Kung, Heng-Yu; Lai, Yi-Shao; Hsiung Tsai, Ming; Yeh, Wen-Kuan

2008-02-01

In this work, we present a novel approach and method for elucidating the characteristics of wafer-level chip-scale packages (WLCSPs) for electromigration (EM) tests. The die in WLCSP was directly attached to the substrate via a soldered interconnect. The shrinking of the area of the die that is available for power, and the solder bump also shrinks the volume and increases the density of electrons for interconnect efficiency. The bump current density now approaches to 106 A/cm2, at which point the EM becomes a significant reliability issue. As known, the EM failure depends on numerous factors, including the working temperature and the under bump metallization (UBM) thickness. A new interconnection geometry is adopted extensively with moderate success in overcoming larger mismatches between the displacements of components during current and temperature changes. Both environments and testing parameters for WLCSP are increasingly demanded. Although failure mechanisms are considered to have been eliminated or at least made manageable, new package technologies are again challenging its process, integrity and reliability. WLCSP technology was developed to eliminate the need for encapsulation to ensure compatibility with smart-mount technology (SMT). The package has good handing properties but is now facing serious reliability problems. In this work, we investigated the reliability of a WLCSP subjected to different accelerated current stressing conditions at a fixed ambient temperature of 125 °C. A very strong correlation exists between the mean time to failure (MTTF) of the WLCSP test vehicle and the mean current density that is carried by a solder joint. A series of current densities were applied to the WLCSP architecture; Black's power law was employed in a failure mode simulation. Additionally, scanning electron microscopy (SEM) was adopted to determine the differences existing between high- and low-current-density failure modes.

Experimental demonstration of the optical multi-mesh hypercube: scaleable interconnection network for multiprocessors and multicomputers.

PubMed

Louri, A; Furlonge, S; Neocleous, C

1996-12-10

A prototype of a novel topology for scaleable optical interconnection networks called the optical multi-mesh hypercube (OMMH) is experimentally demonstrated to as high as a 150-Mbit/s data rate (2(7) - 1 nonreturn-to-zero pseudo-random data pattern) at a bit error rate of 10(-13)/link by the use of commercially available devices. OMMH is a scaleable network [Appl. Opt. 33, 7558 (1994); J. Lightwave Technol. 12, 704 (1994)] architecture that combines the positive features of the hypercube (small diameter, connectivity, symmetry, simple routing, and fault tolerance) and the mesh (constant node degree and size scaleability). The optical implementation method is divided into two levels: high-density local connections for the hypercube modules, and high-bit-rate, low-density, long connections for the mesh links connecting the hypercube modules. Free-space imaging systems utilizing vertical-cavity surface-emitting laser (VCSEL) arrays, lenslet arrays, space-invariant holographic techniques, and photodiode arrays are demonstrated for the local connections. Optobus fiber interconnects from Motorola are used for the long-distance connections. The OMMH was optimized to operate at the data rate of Motorola's Optobus (10-bit-wide, VCSEL-based bidirectional data interconnects at 150 Mbits/s). Difficulties encountered included the varying fan-out efficiencies of the different orders of the hologram, misalignment sensitivity of the free-space links, low power (1 mW) of the individual VCSEL's, and noise.

Optics vs copper: from the perspective of "Thunderbolt" interconnect technology

NASA Astrophysics Data System (ADS)

Cheng, Hengju; Krause, Christine; Ko, Jamyuen; Gao, Miaobin; Liu, Guobin; Wu, Huichin; Qi, Mike; Lam, Chun-Chit

2013-02-01

Interconnect technology has been progressed at a very fast pace for the past decade. The signaling rates have steadily increased from 100:Mb/s to 25Gb/s. In every generation of interconnect technology evolution, optics always seems to take over at first, however, at the end, the cost advantage of copper wins over. Because of this, optical interconnects are limited to longer distance links where the attenuation in copper cable is too large for the integrated circuits to compensate. Optical interconnect has long been viewed as the premier solution in compared with copper interconnect. With the release of Thunderbolt technology, we are entering a new era in consumer electronics that runs at 10Gb/s line rate (20Gb/s throughput per connector interface). Thunderbolt interconnect technology includes both active copper cables and active optical cables as the transmission media which have very different physical characteristics. In order for optics to succeed in consumer electronics, several technology hurdles need to be cleared. For example, the optical cable needs to handle the consumer abuses such as pinch and bend. Also, the optical engine used in the active optical cable needs to be physically very small so that we don't change the looks and feels of the cable/connector. Most importantly, the cost of optics needs to come down significantly to effectively compete with the copper solution. Two interconnect technologies are compared and discussed on the relative cost, power consumption, form factor, density, and future scalability.

Board-to-board optical interconnection using novel optical plug and slot

NASA Astrophysics Data System (ADS)

Cho, In K.; Yoon, Keun Byoung; Ahn, Seong H.; Kim, Jin Tae; Lee, Woo Jin; Shin, Kyoung Up; Heo, Young Un; Park, Hyo Hoon

2004-10-01

A novel optical PCB with transmitter/receiver system boards and optical bakcplane was prepared, which is board-to-board interconnection by optical plug and slot. We report an 8Gb/s PRBS NRZ data transmission between transmitter system board and optical backplane embedded multimode polymeric waveguide arrays. The basic concept of ETRI's optical PCB is as follows; 1) Metal optical bench is integrated with optoelectronic devices, driver and receiver circuits, polymeric waveguide and access line PCB module. 2) Multimode polymeric waveguide inside an optical backplane, which is embedded into PCB. 3) Optical slot and plug for high-density(channel pitch : 500um) board-to-board interconnection. The polymeric waveguide technology can be used for transmission of data on transmitter/ receiver system boards and for backplane interconnections. The main components are low-loss tapered polymeric waveguides and a novel optical plug and slot for board-to-board interconnections, respectively. The optical PCB is characteristic of low coupling loss, easy insertion/extraction of the boards and, especially, reliable optical coupling unaffected from external environment after board insertion.

Rapid trench initiated recrystallization and stagnation in narrow Cu interconnect lines

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Brien, Brendan B.; Rizzolo, Michael; Prestowitz, Luke C.

2015-10-26

Understanding and ultimately controlling the self-annealing of Cu in narrow interconnect lines has remained a top priority in order to continue down-scaling of back-end of the line interconnects. Recently, it was hypothesized that a bottom-up microstructural transformation process in narrow interconnect features competes with the surface-initiated overburden transformation. Here, a set of transmission electron microscopy images which captures the grain coarsening process in 48 nm lines in a time resolved manner is presented, supporting such a process. Grain size measurements taken from these images have demonstrated that the Cu microstructural transformation in 48 nm interconnect lines stagnates after only 1.5 h atmore » room temperature. This stubborn metastable structure remains stagnant, even after aggressive elevated temperature anneals, suggesting that a limited internal energy source such as dislocation content is driving the transformation. As indicated by the extremely low defect density found in 48 nm trenches, a rapid recrystallization process driven by annihilation of defects in the trenches appears to give way to a metastable microstructure in the trenches.« less

Asthma and Hispanic Americans

MedlinePlus

... as bronchitis. Children living below or near the poverty level are more likely to have high levels ... www.cdc.gov/nchs/hdi.htm The proportional impact of asthma prevalence, health care use and mortality ...

Building the evidence base for global tobacco control.

PubMed Central

Corrao, M. A.; Guindon, G. E.; Cokkinides, V.; Sharma, N.

2000-01-01

The tobacco control movement needs a global information system permitting routine monitoring of the tobacco trade, tobacco farming, the tobacco industry, the prevalence of tobacco use, associated mortality, and national resources for combating tobacco. The Tobacco Control Country Profiles database, a data collection initiative led by the American Cancer Society in collaboration with WHO and the Centers for Disease Control and Prevention, represents the first step in the development of such a system. Baseline data on several indicators of tobacco use were obtained from 191 Member States of WHO, two Associate Members, Hong Kong Special Administrative Region of China (Hong Kong SAR), China (Province of Taiwan) and the West Bank and Gaza Strip. The methods used to compile the data are described in the present paper. Selected indicators from the database were analysed in order to demonstrate the potential utility and value of data derived from an information system devoted to tobacco control. The analyses covered gender-specific smoking prevalence by WHO Region, per capita cigarette consumption by Human Development Index (HDI) category, and average real annual percentage changes in cigarette prices between 1990 and 1999 for selected countries in each category. In 1998, men were almost four times more likely than women to be smokers. The prevalence of smoking among men was highest in the Western Pacific Region. The differential in gender-specific smoking prevalence was narrowest in the Region of the Americas and the European Region. It was wider in the South-East Asia Region and the Western Pacific Region. The lowest and highest per capita consumption of manufactured cigarettes occurred in the lowest and highest HDI categories respectively. In the medium HDI category, China's growing cigarette consumption after 1975 had a major bearing on the rise in per capita consumption. Cigarette price trends suggest that there is considerable scope for increasing taxes on tobacco products, particularly in low or medium HDI countries. The implications of the findings for future tobacco control efforts are discussed, as are issues surrounding the quality of available data, priorities for future data collection and the need to maintain and improve the information system in order to support such efforts. PMID:10994261

Effect of manual therapy techniques on headache disability in patients with tension-type headache. Randomized controlled trial.

PubMed

Espí-López, G V; Rodríguez-Blanco, C; Oliva-Pascual-Vaca, A; Benítez-Martínez, J C; Lluch, E; Falla, D

2014-12-01

Tension-type headache (TTH) is the most common type of primary headache however there is no clear evidence as to which specific treatment is most effective or whether combined treatment is more effective than individual treatments. To assess the effectiveness of manual therapy techniques, applied to the suboccipital region, on aspects of disability in a sample of patients with tension-type headache. Randomized Controlled Trial. Specialized centre for headache treatment. Seventy-six (62 women) patients (age: 39.9 ± 10.9 years) with episodic chronic TTH. Patients were randomly divided into four treatment groups: 1) suboccipital soft tissue inhibition; 2) occiput-atlas-axis manipulation; 3) combined treatment of both techniques; 4) control. Four sessions were applied over 4 weeks and disability was assessed before and after treatment using the Headache Disability Inventory (HDI). Headache frequency, severity and the functional and emotional subscales of the questionnaire were assessed. Photophobia, phonophobia and pericranial tenderness were also monitored. Headache frequency was significantly reduced with the manipulative and combined treatment (P<0.05), and the severity and functional subscale of the HDI changed in all three treatment groups (P<0.05). Manipulation treatment also reduced the score on the emotional subscale of the HDI (P<0.05). The combined intervention showed a greater effect at reducing the overall HDI score compared to the group that received suboccipital soft tissue inhibition and to the control group (both P<0.05). In addition, photophobia, phonophobia and pericranial tenderness only improved in the group receiving combined therapy (P<0.05). When given individually, suboccipital soft tissue inhibition and occiput-atlas-axis manipulation resulted in changes in different parameters related to the disability caused by TTH. However, when the two treatments were combined, effectiveness was noted for all aspects of disability and other symptoms including photophobia, phonophobia and pericranial tenderness. Although individual manual therapy treatments showed a positive change in headache features, measures of photophobia, photophobia and pericranial tenderness only improved in the group that received the combined treatment suggesting that combined treatment is the most appropriate for symptomatic relief of TTH.

What do we know about the needs and challenges of health systems? A scoping review of the international literature.

PubMed

Roncarolo, Federico; Boivin, Antoine; Denis, Jean-Louis; Hébert, Rejean; Lehoux, Pascale

2017-09-08

While there is an extensive literature on Health System (HS) strengthening and on the performance of specific HSs, there are few exhaustive syntheses of the challenges HSs are facing worldwide. This paper reports the findings of a scoping review aiming to classify the challenges of HSs investigated in the scientific literature. Specifically, it determines the kind of research conducted on HS challenges, where it was performed, in which health sectors and on which populations. It also identifies the types of challenge described the most and how they varied across countries. We searched 8 databases to identify scientific papers published in English, French and Italian between January 2000 and April 2016 that addressed HS needs and challenges. The challenges reported in the articles were classified using van Olmen et al.'s dynamic HS framework. Countries were classified using the Human Development Index (HDI). Our analyses relied on descriptive statistics and qualitative content analysis. 292 articles were included in our scoping review. 33.6% of these articles were empirical studies and 60.1% were specific to countries falling within the very high HDI category, in particular the United States. The most frequently researched sectors were mental health (41%), infectious diseases (12%) and primary care (11%). The most frequently studied target populations included elderly people (23%), people living in remote or poor areas (21%), visible or ethnic minorities (15%), and children and adolescents (15%). The most frequently reported challenges related to human resources (22%), leadership and governance (21%) and health service delivery (24%). While health service delivery challenges were more often examined in countries within the very high HDI category, human resources challenges attracted more attention within the low HDI category. This scoping review provides a quantitative description of the available evidence on HS challenges and a qualitative exploration of the dynamic relationships that HS components entertain. While health services research is increasingly concerned about the way HSs can adopt innovations, little is known about the system-level challenges that innovations should address in the first place. Within this perspective, four key lessons are drawn as well as three knowledge gaps.

The Incidence and Mortality of Colorectal Cancer and Its Relationship With the Human Development Index in Asia.

PubMed

Ghoncheh, Mahshid; Mohammadian, Maryam; Mohammadian-Hafshejani, Abdollah; Salehiniya, Hamid

Colorectal cancer is the second most common cancer in women and the third most common cancer among men, and its incidence is increasing in Asia. Awareness about the status of this cancer incidence and mortality is necessary for a better plan. The present study was done with the aim to investigate the incidence and mortality of colorectal cancer and its relationship with the Human Development Index (HDI) in Asia in 2012. This study was an ecological study, which was conducted based on the GLOBOCAN project of the World Health Organization for Asian countries. We assessed the correlation between standardized incidence rates (SIR) and standardized mortality rates (SMR) of colorectal cancer with HDI and its components using SPSS software, version 18 (SPSS Inc., Chicago, IL). A total of 592,563 incidences of and 325,752 deaths from colorectal cancer were recorded in Asian countries in 2012. The 5 countries with the highest SIR were Republic of Korea (45 per 100,000), Israel (35.9 per 100,000), Singapore (33.7 per 100,000), Japan (32.2 per 100,000), and Jordan (25.6 per 100,000). The 5 countries with the highest SMR for colorectal cancer were Jordan (15.5 per 100,000), Kazakhstan (12.8 per 100,000), Democratic Republic of Korea (12 per 100,000), Brunei (12 per 100,000), and Japan (11.9 per 100,000). Correlation between HDI and SIR was 0.709 overall (P ≤ .001)- 0.667 in men (P ≤ .001) and 0.759 in women (P ≤ .001). Also, correlation between HDI and SMR overall was 0.517 (P ≤ .001)- 0.447 in men (P = .002) and 0.593 in women (P ≤ .001). Cancer incidence and mortality are higher in countries with more development. A positive and statistically significant correlation was found between standardized incidence and mortality rate of colorectal cancer and the Human Development Index and its components. Copyright © 2016. Published by Elsevier Inc.

Dermal, inhalation, and internal exposure to 1,6‐HDI and its oligomers in car body repair shop workers and industrial spray painters

PubMed Central

Pronk, A; Yu, F; Vlaanderen, J; Tielemans, E; Preller, L; Bobeldijk, I; Deddens, J A; Latza, U; Baur, X; Heederik, D

2006-01-01

Objectives To study inhalation and dermal exposure to hexamethylene diisocyanate (HDI) and its oligomers as well as personal protection equipment (PPE) use during task performance in conjunction with urinary hexamethylene diamine (HDA) in car body repair shop workers and industrial spray painters. Methods Personal task based inhalation samples (n = 95) were collected from six car body repair shops and five industrial painting companies using impingers with di‐n‐butylamine (DBA) in toluene. In parallel, dermal exposure was assessed using nitril rubber gloves. Gloves were submerged into DBA in toluene after sampling. Analysis for HDI and its oligomers was performed by LC‐MS/MS. Urine samples were collected from 55 workers (n = 291) and analysed for HDA by GC‐MS. Results Inhalation exposure was strongly associated with tasks during which aerosolisation occurs. Dermal exposure occurred during tasks that involve direct handling of paint. In car body repair shops associations were found between detectable dermal exposure and glove use (odds ratio (OR) 0.22, 95% confidence interval (CI) 0.09 to 0.57) and inhalation exposure level (OR 1.34, 95% CI 0.97 to 1.84 for a 10‐fold increase). HDA in urine could be demonstrated in 36% and 10% of car body repair shop workers and industrial painting company workers respectively. In car body repair shops, the frequency of detectable HDA was significantly elevated at the end of the working day (OR 2.13, 95% CI 1.07 to 4.22 for 3–6 pm v 0–8 am). In both branches HDA was detected in urine of ∼25% of the spray painters. In addition HDA was detected in urine of a large proportion of non‐spray painters in car body repair shops. Conclusion Although (spray) painting with lacquers containing isocyanate hardeners results in the highest external exposures to HDI and oligomers, workers that do not perform paint related tasks may also receive a considerable internal dose. PMID:16728504

Interconnecting PV on New York City's Secondary Network Distribution System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, K; Coddington, M; Burman, K

2009-11-01

The U.S. Department of Energy (DOE) has teamed with cities across the country through the Solar America Cities (SAC) partnership program to help reduce barriers and accelerate implementation of solar energy. The New York City SAC team is a partnership between the City University of New York (CUNY), the New York City Mayor s Office of Long-term Planning and Sustainability, and the New York City Economic Development Corporation (NYCEDC).The New York City SAC team is working with DOE s National Renewable Energy Laboratory (NREL) and Con Edison, the local utility, to develop a roadmap for photovoltaic (PV) installations in themore » five boroughs. The city set a goal to increase its installed PV capacity from1.1 MW in 2005 to 8.1 MW by 2015 (the maximum allowed in 2005). A key barrier to reaching this goal, however, is the complexity of the interconnection process with the local utility. Unique challenges are associated with connecting distributed PV systems to secondary network distribution systems (simplified to networks in this report). Although most areas of the country use simpler radial distribution systems to distribute electricity, larger metropolitan areas like New York City typically use networks to increase reliability in large load centers. Unlike the radial distribution system, where each customer receives power through a single line, a network uses a grid of interconnected lines to deliver power to each customer through several parallel circuits and sources. This redundancy improves reliability, but it also requires more complicated coordination and protection schemes that can be disrupted by energy exported from distributed PV systems. Currently, Con Edison studies each potential PV system in New York City to evaluate the system s impact on the network, but this is time consuming for utility engineers and may delay the customer s project or add cost for larger installations. City leaders would like to streamline this process to facilitate faster, simpler, and less expensive distributed PV system interconnections. To assess ways to improve the interconnection process, NREL conducted a four-part study with support from DOE. The NREL team then compiled the final reports from each study into this report. In Section 1PV Deployment Analysis for New York City we analyze the technical potential for rooftop PV systems in the city. This analysis evaluates potential PV power production in ten Con Edison networks of various locations and building densities (ranging from high density apartments to lower density single family homes). Next, we compare the potential power production to network loads to determine where and when PV generation is most likely to exceed network load and disrupt network protection schemes. The results of this analysis may assist Con Edison in evaluating future PV interconnection applications and in planning future network protection system upgrades. This analysis may also assist other utilities interconnecting PV systems to networks by defining a method for assessing the technical potential of PV in the network and its impact on network loads. Section 2. A Briefing for Policy Makers on Connecting PV to a Network Grid presents an overview intended for nontechnical stakeholders. This section describes the issues associated with interconnecting PV systems to networks, along with possible solutions. Section 3. Technical Review of Concerns and Solutions to PV Interconnection in New York City summarizes common concerns of utility engineers and network experts about interconnecting PV systems to secondary networks. This section also contains detailed descriptions of nine solutions, including advantages and disadvantages, potential impacts, and road maps for deployment. Section 4. Utility Application Process Reviewlooks at utility interconnection application processes across the country and identifies administrative best practices for efficient PV interconnection.« less

1310nm VCSELs in 1-10Gb/s commercial applications

NASA Astrophysics Data System (ADS)

Jewell, Jack; Graham, Luke; Crom, Max; Maranowski, Kevin; Smith, Joseph; Fanning, Tom

2006-02-01

Beginning with 4 Gigabit/sec Fibre-Channel, 1310nm vertical-cavity surface-emitting lasers (VCSELs) are now entering the marketplace. Such VCSELs perform like distributed feedback lasers but have drive currents and heat dissipation like 850nm VCSELs, making them ideal for today's high-performance interconnects and the only choice for the next step in increased interconnection density. Transceiver performances at 4 and 10 Gigabits/sec over fiber lengths 10-40km are presented. The active material is extremely robust, resulting in excellent reliability.

Copper Nanowire Production for Interconnect Applications

NASA Technical Reports Server (NTRS)

Han, Jin-Woo (Inventor); Meyyappan, Meyya (Inventor)

2014-01-01

A method of fabricating metallic Cu nanowires with lengths up to about 25 micrometers and diameters in a range 20-100 nanometers, or greater if desired. Vertically oriented or laterally oriented copper oxide structures (CuO and/or Cu2O) are grown on a Cu substrate. The copper oxide structures are reduced with 99+ percent H or H2, and in this reduction process the lengths decrease (to no more than about 25 micrometers), the density of surviving nanostructures on a substrate decreases, and the diameters of the surviving nanostructures have a range, of about 20-100 nanometers. The resulting nanowires are substantially pure Cu and can be oriented laterally (for local or global interconnects) or can be oriented vertically (for standard vertical interconnects).

Crime Modeling using Spatial Regression Approach

NASA Astrophysics Data System (ADS)

Saleh Ahmar, Ansari; Adiatma; Kasim Aidid, M.

2018-01-01

Act of criminality in Indonesia increased both variety and quantity every year. As murder, rape, assault, vandalism, theft, fraud, fencing, and other cases that make people feel unsafe. Risk of society exposed to crime is the number of reported cases in the police institution. The higher of the number of reporter to the police institution then the number of crime in the region is increasing. In this research, modeling criminality in South Sulawesi, Indonesia with the dependent variable used is the society exposed to the risk of crime. Modelling done by area approach is the using Spatial Autoregressive (SAR) and Spatial Error Model (SEM) methods. The independent variable used is the population density, the number of poor population, GDP per capita, unemployment and the human development index (HDI). Based on the analysis using spatial regression can be shown that there are no dependencies spatial both lag or errors in South Sulawesi.

Lubricant depletion under various laser heating conditions in Heat Assisted Magnetic Recording (HAMR)

NASA Astrophysics Data System (ADS)

Xiong, Shaomin; Wu, Haoyu; Bogy, David

2014-09-01

Heat assisted magnetic recording (HAMR) is expected to increase the storage areal density to more than 1 Tb/in2 in hard disk drives (HDDs). In this technology, a laser is used to heat the magnetic media to the Curie point (~400-600 °C) during the writing process. The lubricant on the top of a magnetic disk could evaporate and be depleted under the laser heating. The change of the lubricant can lead to instability of the flying slider and failure of the head-disk interface (HDI). In this study, a HAMR test stage is developed to study the lubricant thermal behavior. Various heating conditions are controlled for the study of the lubricant thermal depletion. The effects of laser heating repetitions and power levels on the lubricant depletion are investigated experimentally. The lubricant reflow behavior is discussed as well.

Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects

NASA Astrophysics Data System (ADS)

Talic, Belma; Falk-Windisch, Hannes; Venkatachalam, Vinothini; Hendriksen, Peter Vang; Wiik, Kjell; Lein, Hilde Lea

2017-06-01

Manganese cobalt spinel oxides are promising materials for protective coatings for solid oxide fuel cell (SOFC) interconnects. To achieve high density such coatings are often sintered in a two-step procedure, involving heat treatment first in reducing and then in oxidizing atmospheres. Sintering the coating inside the SOFC stack during heating would reduce production costs, but may result in a lower coating density. The importance of coating density is here assessed by characterization of the oxidation kinetics and Cr evaporation of Crofer 22 APU with MnCo1.7Fe0.3O4 spinel coatings of different density. The coating density is shown to have minor influence on the long-term oxidation behavior in air at 800 °C, evaluated over 5000 h. Sintering the spinel coating in air at 900 °C, equivalent to an in-situ heat treatment, leads to an 88% reduction of the Cr evaporation rate of Crofer 22 APU in air-3% H2O at 800 °C. The air sintered spinel coating is initially highly porous, however, densifies with time in interaction with the alloy. A two-step reduction and re-oxidation heat treatment results in a denser coating, which reduces Cr evaporation by 97%.

International Comparison of Water Resources Utilization Efficiency in the Silk Road Economic Belt

NASA Astrophysics Data System (ADS)

Yan, Long; Ma, Jing; Deng, Wei; Wang, Yong

2018-03-01

In order to get knowledge of the standard of water utilization of the Silk Road Economic Belt from international point of view, the paper analyzes the annual variation of water resources utilization in the Silk Road Economic Belt, and compares with other typical countries. The study shows that Water resources utilization efficiency has been greatly improved in recent 20 years and the water consumption per USD 10000 of GDP has been declined 87.97%. the improvement of industrial water consumption efficiency is the key driving factors for substantial decrease in water consumption.The comparison of water utilization and human development shows that the higher HDI the country is, the more efficient water utilization the country has. water consumption per USD 10000 of GDP in country with HDI>0.9 is 194m³, being 8.5% of that in country with HDI from 0.5 to 0.6. On the premise of maintaining the stable economic and social development of the Silk Road Economic Belt, the realization of the control target of total water consumption must depend on the strict control over the disorderly expansion of irrigated area, the change in the mode of economic growth, the implementation of the development strategy for new industrialization and urbanization, vigorous development of the processing industry with low water consumption as well as the high-tech and high value-added industry. Only in this way, the control target of total water consumption can be realized in the process of completing the industrialization task.

Alcohol-Related Negative Consequences among Drinkers around the World

PubMed Central

Graham, Kathryn; Bernards, Sharon; Knibbe, Ronald; Kairouz, Sylvia; Kuntche, Sandra; Wilsnack, Sharon C.; Greenfield, Thomas K.; Dietze, Paul; Obot, Isidore; Gmel, Gerhard

2013-01-01

Aims This paper examines (1) gender and country differences in negative consequences related to drinking; (2) relative rates of different consequences; (3) country-level predictors of consequences. Design, setting and participants Multi-level analyses used survey data from the GENACIS collaboration. Measurements Measures included 17 negative consequences grouped into (a) high endorsement acute, (b) personal and (c) social. Country-level measures included average frequency and quantity of drinking, percent current drinkers, Gross Domestic Product (GDP) and Human Development Index (HDI). Findings Overall, the three groupings of consequences were reported by 44%, 12% and 7% of men and by 31%, 6% and 3% of women, respectively. More men than women endorsed all consequences but gender differences were greatest for consequences associated with chronic drinking and social consequences related to male roles. The highest prevalence of consequences was in Uganda, lowest in Uruguay. Personal and social consequences were more likely in countries with higher usual quantity, fewer current drinkers, and lower scores on GDP and HDI. However, significant interactions with individual-level quantity indicated a stronger relationship between consequences and usual quantity among drinkers in countries with lower quantity, more current drinkers and higher scores on GDP and HDI. Conclusions Both gender and country need to be taken into consideration when assessing adverse drinking consequences. Individual measures of alcohol consumption and country-level variables are associated with experiencing such consequences. Additionally, country-level variables affect the strength of the relationship between usual quantity consumed by individuals and adverse consequences. PMID:21395893

Suicide rate in relation to the Human Development Index and other health related factors: A global ecological study from 91 countries.

PubMed

Khazaei, Salman; Armanmehr, Vajihe; Nematollahi, Shahrzad; Rezaeian, Shahab; Khazaei, Somayeh

2017-06-01

There has been no worldwide ecological study on suicide as a global major public health problem. This study aimed to identify the variations in suicide specific rates using the Human Development Index (HDI) and some health related variables among countries around the world. In this ecological study, we obtained the data from the World Bank Report 2013. The analysis was restricted to 91 countries for which both the epidemiologic data from the suicide rates and HDI were available. Overall, the global prevalence of suicide rate was 10.5 (95% confidence intervals: 8.8, 12.2) per 100,000 individuals, which significantly varied according to gender (16.3 in males vs. 4.6 in females, p<0.001) and different levels of human development (11.64/100,000 individuals in very high development countries, 7.93/100,000 individuals in medium development countries, and 13.94/100,000 individuals in high development countries, p=0.004). In conclusion, the suicide rate varies greatly between countries with different development levels. Our findings also suggest that male gender and HDI components are associated with an increased risk of suicide behaviors. Hence, detecting population subgroups with a high suicide risk and reducing the inequality of socioeconomic determinants are necessary to prevent this disorder around the world. Copyright © 2017 Ministry of Health, Saudi Arabia. Published by Elsevier Ltd. All rights reserved.

Educational inequalities in obesity, abdominal obesity, and metabolic syndrome in seven Latin American cities: the CARMELA Study.

PubMed

Boissonnet, Carlos; Schargrodsky, Herman; Pellegrini, Fabio; Macchia, Alejandro; Marcet Champagne, Beatriz; Wilson, Elinor; Tognoni, Gianni

2011-08-01

Earlier reviews have found that the proportion of inverse associations between socioeconomic status and obesity increased according to the level of development of the studied country. Based on this finding, it has been hypothesized that in low- to middle- income countries the burden of obesity shifts to disadvantaged groups as a country develops. CARMELA is a cross-sectional, population-based observational study that sampled 11,550 women and men age 25-64 from seven major Latin American cities. We analyzed by gender the association of educational attainments (as proxy of socioeconomic status) with body mass index, waist circumference and metabolic syndrome. Participating cities were divided by country Human Development Index (HDI). An inverse gradient between socioeconomic status and body mass index in women was uniformly present in High HDI cities (Buenos Aires, Santiago, Mexico) but not in Medium HDI group (Barquisimeto, Bogota, Lima, Quito), where two cities showed an inverse gradient and two cities did not. In men, no clear socioeconomic gradients were found. Findings regarding waist circumference and metabolic syndrome closely mirrored those about body mass index. In women but not men, these results give support to the hypothesis of obesity shifting to the poor and extend it to the related concepts of abdominal obesity and metabolic syndrome. Obesity should be considered as a socially-generated disease and an indicator of socioeconomic disadvantage, to be approached by comprehensive strategies that bear in mind this perspective.

Concept of an advanced hyperspectral remote sensing system for pipeline monitoring

NASA Astrophysics Data System (ADS)

Keskin, Göksu; Teutsch, Caroline D.; Lenz, Andreas; Middelmann, Wolfgang

2015-10-01

Areas occupied by oil pipelines and storage facilities are prone to severe contamination due to leaks caused by natural forces, poor maintenance or third parties. These threats have to be detected as quickly as possible in order to prevent serious environmental damage. Periodical and emergency monitoring activities need to be carried out for successful disaster management and pollution minimization. Airborne remote sensing stands out as an appropriate choice to operate either in an emergency or periodically. Hydrocarbon Index (HI) and Hydrocarbon Detection Index (HDI) utilize the unique absorption features of hydrocarbon based materials at SWIR spectral region. These band ratio based methods require no a priori knowledge of the reference spectrum and can be calculated in real time. This work introduces a flexible airborne pipeline monitoring system based on the online quasi-operational hyperspectral remote sensing system developed at Fraunhofer IOSB, utilizing HI and HDI for oil leak detection on the data acquired by an SWIR imaging sensor. Robustness of HI and HDI compared to state of the art detection algorithms is evaluated in an experimental setup using a synthetic dataset, which was prepared in a systematic way to simulate linear mixtures of selected background and oil spectra consisting of gradually decreasing percentages of oil content. Real airborne measurements in Ettlingen, Germany are used to gather background data while the crude oil spectrum was measured with a field spectrometer. The results indicate that the system can be utilized for online and offline monitoring activities.

Chemical analysis of 2,4-toluene diisocyanate, 1,6-hexamethylene diisocyanate and isophorone diisocyanate in petrolatum patch-test preparations.

PubMed

Frick-Engfeldt, Malin; Zimerson, Erik; Karlsson, Daniel; Marand, Asa; Skarping, Gunnar; Isaksson, Marléne; Bruze, Magnus

2005-09-01

Isocyanates with the general formula R-(N=C=O) are theoretically contact sensitizers. However, allergic contact dermatitis (ACD) from isocyanates is seldom reported. In previous reports, patients reacted to their isocyanate-based work materials but not to commercial patch-test preparations of isocyanates. Therefore, we suspected that the low frequency of reported ACD from isocyanates was partly due to inadequate commercial preparations. A past study also showed the concentrations of diphenylmethane-4,4'-diisocyanate (4,4'-MDI) in petrolatum preparations to be much lower than declared. In this study, 2,4-toluene diisocyanate (2,4-TDI), 1,6-hexamethylene diisocyanate (1,6-HDI), and isophorone diisocyanate (IPDI) were investigated in a similar fashion. In preparations from 12 dermatology departments and two suppliers of patch-test allergens, we determined the isocyanate content as the isocyanate-dibutylamine derivative, using liquid chromatography and mass spectrometry. The preparations were considered stable if the ratio between the stated and found concentrations was within the range of 0.8 to 1.2. Although 28 of 36 investigated preparations had ratios outside of the stable range, they were in its vicinity, which indicates that preparations of 2,4-TDI, 1,6-HDI, and IPDI are more stable than are preparations of 4,4'-MDI where previously reported results showed ratios far outside of stable range. As opposed to preparations of 4,4'-MDI, preparations of 2,4-TDI, 1,6-HDI, and IPDI can be considered to be stable.

Low density, resorcinol-formaldehyde aerogels

DOEpatents

Pekala, Richard W.

1991-01-01

The polycondensation of resorcinol with formaldehyde under alkaline conditions results in the formation of surface functionalized polymer "Clusters". The covalent crosslinking of these "clusters" produces gels which when processed under supercritical conditions, produce low density, organic aerogels (density.ltoreq.100 mg/cc; cell size .ltoreq.0.1 microns). The aerogels are transparent, dark red in color and consist of interconnected colloidal-like particles with diameters of about 100.circle.. These aerogels may be further carbonized to form low density carbon foams with cell size of about 0.1 micron.

Low density, resorcinol-formaldehyde aerogels

DOEpatents

Pekala, Richard W.

1989-01-01

The polycondensation of resorcinol with formaldehyde under alkaline conditions results in the formation of surface functionalized polymer "clusters". The covalent crosslinking of these "clusters" produces gels which when processed under supercritical conditions, produce low density, organic aerogels (density .ltoreq.100 mg/cc; cell size .ltoreq.0.1 microns). The aerogels are transparent, dark red in color and consist of interconnected colloidal-like particles with diameters of about 100 .ANG.. These aerogels may be further carbonized to form low density carbon foams with cell size of about 0.1 micron.

Low density, resorcinol-formaldehyde aerogels

DOEpatents

Pekala, R.W.

1989-10-10

The polycondensation of resorcinol with formaldehyde under alkaline conditions results in the formation of surface functionalized polymer clusters. The covalent crosslinking of these clusters produces gels which when processed under supercritical conditions, produce low density, organic aerogels (density [<=]100 mg/cc; cell size [<=]0.1 microns). The aerogels are transparent, dark red in color and consist of interconnected colloidal-like particles with diameters of about 100 [angstrom]. These aerogels may be further carbonized to form low density carbon foams with cell size of about 0.1 micron.

Electron scattering at interfaces in nano-scale vertical interconnects: A combined experimental and ab initio study

NASA Astrophysics Data System (ADS)

Lanzillo, Nicholas A.; Restrepo, Oscar D.; Bhosale, Prasad S.; Cruz-Silva, Eduardo; Yang, Chih-Chao; Youp Kim, Byoung; Spooner, Terry; Standaert, Theodorus; Child, Craig; Bonilla, Griselda; Murali, Kota V. R. M.

2018-04-01

We present a combined theoretical and experimental study on the electron transport characteristics across several representative interface structures found in back-end-of-line interconnect stacks for advanced semiconductor manufacturing: Cu/Ta(N)/Co/Cu and Cu/Ta(N)/Ru/Cu. In particular, we evaluate the impact of replacing a thin TaN barrier with Ta while considering both Co and Ru as wetting layers. Both theory and experiment indicate a pronounced reduction in vertical resistance when replacing TaN with Ta, regardless of whether a Co or Ru wetting layer is used. This indicates that a significant portion of the total vertical resistance is determined by electron scattering at the Cu/Ta(N) interface. The electronic structure of these nano-sized interconnects is analyzed in terms of the atom-resolved projected density of states and k-resolved transmission spectra at the Fermi level. This work further develops a fundamental understanding of electron transport and material characteristics in nano-sized interconnects.

Interconnected 3 D Network of Graphene-Oxide Nanosheets Decorated with Carbon Dots for High-Performance Supercapacitors.

PubMed

Zhao, Xiao; Li, Ming; Dong, Hanwu; Liu, Yingliang; Hu, Hang; Cai, Yijin; Liang, Yeru; Xiao, Yong; Zheng, Mingtao

2017-06-22

Interconnected 3 D nanosheet networks of reduced graphene oxide decorated with carbon dots (rGO/CDs) are successfully fabricated through a simple one-pot hydrothermal process. The as-prepared rGO/CDs present appropriate 3 D interconnectivity and abundant stable oxygen-containing functional groups, to which we can attribute the excellent electrochemical performance such as high specific capacitance, good rate capability, and great cycling stability. Employed as binder-free electrodes for supercapacitors, the resulting rGO/CDs exhibit excellent long-term cycling stability (ca. 92 % capacitance retention after 20 000 charge/discharge cycles at current density of 10 A g -1 ) as well as a maximum specific capacitance of about 308 F g -1 at current density of 0.5 A g -1 , which is much higher than that of rGO (200 F g -1 ) and CDs (2.2 F g -1 ). This work provides a promising strategy to fabricate graphene-based nanomaterials with greatly boosted electrochemical performances by decoration of with CDs. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A macrochip interconnection network enabled by silicon nanophotonic devices.

PubMed

Zheng, Xuezhe; Cunningham, John E; Koka, Pranay; Schwetman, Herb; Lexau, Jon; Ho, Ron; Shubin, Ivan; Krishnamoorthy, Ashok V; Yao, Jin; Mekis, Attila; Pinguet, Thierry

2010-03-01

We present an advanced wavelength-division multiplexing point-to-point network enabled by silicon nanophotonic devices. This network offers strictly non-blocking all-to-all connectivity while maximizing bisection bandwidth, making it ideal for multi-core and multi-processor interconnections. We introduce one of the key components, the nanophotonic grating coupler, and discuss, for the first time, how this device can be useful for practical implementations of the wavelength-division multiplexing network using optical proximity communications. Finite difference time-domain simulation of the nanophotonic grating coupler device indicates that it can be made compact (20 microm x 50 microm), low loss (3.8 dB), and broadband (100 nm). These couplers require subwavelength material modulation at the nanoscale to achieve the desired functionality. We show that optical proximity communication provides unmatched optical I/O bandwidth density to electrical chips, which enables the application of wavelength-division multiplexing point-to-point network in macrochip with unprecedented bandwidth-density. The envisioned physical implementation is discussed. The benefits of such an interconnect network include a 5-6x improvement in latency when compared to a purely electronic implementation. Performance analysis shows that the wavelength-division multiplexing point-to-point network offers better overall performance over other optical network architectures.

Rupture testing for the quality control of electrodeposited copper interconnections in high-speed, high-density circuits

NASA Technical Reports Server (NTRS)

Zakraysek, Louis

1987-01-01

Printed Wiring Multilayer Board (PWMLB) structures for high speed, high density circuits are prone to failure due to the microcracking of electrolytic copper interconnections. The failure can occur in the foil that makes up the inner layer traces or in the plated through holes (PTH) deposit that forms the layer to layer interconnections. It is shown that there are some distinctive differences in the quality of Type E copper and that these differences can be detected before its use in a PWMLB. It is suggested that the strength of some Type E copper can be very low when the material is hot and that it is the use of this poor quality material in a PWMLB that results in PTH and inner layer microcracking. Since the PWMLB failure in question are induced by a thermal stress, and since the poorer grades of Type E materials used in these structures are susceptible to premature failure under thermal stress, the use of elevated temperature rupture and creep rupture testing is proposed as a means for screening copper foil, or its PTH equivalent, in order to eliminate the problem of Type E copper microcracking in advanced PWMLBs.

Three-Dimensional Bi₂Te₃ Networks of Interconnected Nanowires: Synthesis and Optimization.

PubMed

Ruiz-Clavijo, Alejandra; Caballero-Calero, Olga; Martín-González, Marisol

2018-05-18

Self-standing Bi₂Te₃ networks of interconnected nanowires were fabricated in three-dimensional porous anodic alumina templates (3D⁻AAO) with a porous structure spreading in all three spatial dimensions. Pulsed electrodeposition parameters were optimized to grow highly oriented Bi₂Te₃ interconnected nanowires with stoichiometric composition inside those 3D⁻AAO templates. The nanowire networks were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and Raman spectroscopy. The results are compared to those obtained in films and 1D nanowires grown under similar conditions. The crystalline structure and composition of the 3D Bi⁻Te nanowire network are finely tuned by controlling the applied voltage and the relaxation time off at zero current density during the deposition. With this fabrication method, and controlling the electrodeposition parameters, stoichiometric Bi₂Te₃ networks of interconnected nanowires have been obtained, with a preferential orientation along [1 1 0], which makes them optimal candidates for out-of-plane thermoelectric applications. Moreover, the templates in which they are grown can be dissolved and the network of interconnected nanowires is self-standing without affecting its composition and orientation properties.

Efficacy of HIV Prevention Interventions in Latin American and Caribbean Nations, 1995–2008: A Meta-Analysis

PubMed Central

Huedo-Medina, Tania B.; Boynton, Marcella H.; Warren, Michelle R.; LaCroix, Jessica M.; Carey, Michael P.; Johnson, Blair T.

2014-01-01

This meta-analysis synthesized 34 HIV prevention interventions (from 27 studies) that were evaluated in Latin American and Caribbean nations. These studies were obtained through systematic searches of English, Spanish, and Portuguese-language databases available as of January 2009. Overall, interventions significantly increased knowledge (d = 0.51) and condom use (d = 0.28) but the effects varied widely. Interventions produced more condom use when they focused on high-risk individuals, distributed condoms, and explicitly addressed socio-cultural components. The best-fitting models utilized factors related to geography, especially indices of a nations’ human development index (HDI) and income inequality (i.e., Gini index). Interventions that provided at least three hours of content succeeded better when HDI and income inequality were lower, suggesting that intensive HIV prevention activities succeed best where the need is greatest. Implications for HIV intervention development in Latin America and the Caribbean are discussed. PMID:20661768

VCSELs for exascale computing, computer farms, and green photonics

NASA Astrophysics Data System (ADS)

Hofmann, Werner; Moser, Philip; Wolf, Philip; Larisch, Gunter; Li, Hui; Li, Wei; Lott, James; Bimberg, Dieter

2012-11-01

The bandwidth-induced communication bottleneck due to the intrinsic limitations of metal interconnects is inhibiting the performance and environmental friendliness of todaýs supercomputers, data centers, and in fact all other modern electrically interconnected and interoperable networks such as data farms and "cloud" fabrics. The same is true for systems of optical interconnects (OIs), where even when the metal interconnects are replaced with OIs the systems remain limited by bandwidth, physical size, and most critically the power consumption and lifecycle operating costs. Vertical-cavity surface-emitting lasers (VCSELs) are ideally suited to solve this dilemma. Global communication providers like Google Inc., Intel Inc., HP Inc., and IBM Inc. are now producing optical interconnects based on VCSELs. The optimal bandwidth per link may be analyzed by by using Amdahĺs Law and depends on the architecture of the data center and the performance of the servers within the data center. According to Google Inc., a bandwidth of 40 Gb/s has to be accommodated in the future. IBM Inc. demands 80 Tbps interconnects between solitary server chips in 2020. We recently realized ultrahigh bit rate VCSELs up to 49 Gb/s suited for such optical interconnects emitting at 980 nm. These devices show error-free transmission at temperatures up to 155°C and operate beyond 200°C. Single channel data-rates of 40 Gb/s were achieved up to 75°C. Record high energy efficiencies close to 50 fJ/bit were demonstrated for VCSELs emitting at 850 nm. Our devices are fabricated using a full three-inch wafer process, and the apertures were formed by in-situ controlled selective wet oxidation using stainless steel-based vacuum equipment of our own design. assembly, and operation. All device data are measured, recorded, and evaluated by our proprietary fully automated wafer mapping probe station. The bandwidth density of our present devices is expected to be scalable from about 100 Gbps/mm² to a physical limit of roughly 15 Tbps/mm² based on the current 12.5 Gb/s VCSEL technology. Still more energy-efficient and smaller volume laser diode devices dissipating less heat are mandatory for further up scaling of the bandwidth. Novel metal-clad VCSELs enable a reduction of the device's footprint for potentially ultrashort range interconnects by 1 to 2 orders of magnitude compared to conventional VCSELs thus enabling a similar increase of device density and bandwidth.

Niobium flex cable for low temperature high density interconnects

NASA Astrophysics Data System (ADS)

van Weers, H. J.; Kunkel, G.; Lindeman, M. A.; Leeman, M.

2013-05-01

This work describes the fabrication and characterization of a Niobium on polyimide flex cable suitable for sub-Kelvin temperatures. The processing used can be extended to high density interconnects and allows for direct integration with printed circuit boards. Several key parameters such as RRR, Tc, current carrying capability at 4 K and thermal conductivity in the range from 0.15 to 10 K have been measured. The average Tc was found to be 8.9 K, with a minimum of 8.3 K. Several samples allowed for more than 50 mA current at 4 K while remaining in the superconducting state. The thermal conductivity for this flex design is dominated by the polyimide, in our case Pyralin PI-2611, and is in good agreement with published thermal conductivity data for a polyimide called Upilex R. Registered trademark of Ube Industries, Japan.

Mesoporous NiCo2O4 nano-needles supported by 3D interconnected carbon network on Ni foam for electrochemical energy storage

NASA Astrophysics Data System (ADS)

Lu, Congxiang; Liu, Wen-wen; Pan, Hui; Tay, Beng Kang; Wang, Xingli; Liang, Kun; Wei, Xuezhe

2018-05-01

In this work, a three dimensional (3D) interconnected carbon network consisting of ultrathin graphite (UG) and carbon nanotubes (CNTs) on Ni foam is fabricated and employed as a novel type of substrate for mesoporous NiCo2O4 nano-needles. The successfully synthesized NiCo2O4 nano-needles/CNTs/UG on Ni foam has many advantages including facile electrolyte access and direct conducting pathways towards current collectors, which enable it to be a promising electrode material in battery-like electrochemical energy storage. Encouragingly, a high capacity of 135.1 mAh/g at the current density of 1 A/g, superior rate performance and also stable cycling for 1200 cycles at the current density of 5 A/g have been demonstrated in this novel material.

Electrical and Optical Performance Characteristics of 0.74-eV p/n InGaAs Monolithic Interconnected Modules

NASA Technical Reports Server (NTRS)

Wilt, David M.; Fatemi, Navid S.; Jenkins, Phillip P.; Weizer, Victor G.; Hoffman, Richard W., Jr.; Jain, Raj K.; Murray, Christopher S.; Riley, David R.

1997-01-01

There has been a traditional trade-off in thermophotovoltaic (TPV) energy conversion development between system efficiency and power density. This trade-off originates from the use of front surface spectral controls such as selective emitters and various types of filters. A monolithic interconnected module (MIM) structure has been developed which allows for both high power densities and high system efficiencies. The MIM device consists of many individual indium gallium arsenide (InGaAs) cells series-connected on a single semi-insulating indium phosphide (InP) substrate. The MIM is exposed to the entire emitter output, thereby maximizing output power density. An infrared (IR) reflector placed on the rear surface of the substrate returns the unused portion of the emitter output spectrum back to the emitter for recycling, thereby providing for high system efficiencies. Initial MIM development has focused on a 1 sq cm device consisting of eight (8) series interconnected cells. MIM devices, produced from 0.74-eV InGaAs, have demonstrated V(sub oc) = 3.2 volts, J(sub sc) = 70 mA/sq cm, and a fill factor of 66% under flashlamp testing. Infrared (IR) reflectance measurements (greater than 2 micron) of these devices indicate a reflectivity of greater than 82%. MIM devices produced from 0.55-eV InGaAs have also been demonstrated. In addition, conventional p/n InGaAs devices with record efficiencies (11.7% AM0) have been demonstrated.

InGaAs/InP Monolithic Interconnected Modules (MIM) for Thermophotovoltaic Applications

NASA Technical Reports Server (NTRS)

Wilt, David M.; Fatemi, Navid S.; Jenkins, Phillip P.; Weizer, Victor G.; Hoffman, Richard W., Jr.; Scheiman, David A.; Murray, Christopher S.; Riley, David R.

2004-01-01

There has been a traditional trade-off in thermophotovoltaic (TPV) energy conversion development between systems efficiency and power density. This trade-off originates from the use of front surface spectral controls such as selective emitters and various types of filters. A monolithic interconnected module (MIM) structure has been developed which allows for both high power densities and high system efficiencies. The MIM device consists of many individual indium gallium arsenide (InGaAs) devices series -connected on a single semi-insulating indium phosphide (InP) substrate. The MIMs are exposed to the entire emitter output, thereby maximizing output power density. An infrared (IR) reflector placed on the rear surface of the substrate returns the unused portion of the emitter output spectrum back to the emitter for recycling, thereby providing for high system efficiencies. Initial MIM development has focused on a 1 sq cm device consisting of eight series interconnected cells. MIM devices, produced from 0,74 eV InGAAs, have demonstrated V(sub infinity) = 3.23 volts, J(sub sc) = 70 mA/sq cm and a fill factor of 66% under flashlamp testing. Infrared (IR) reflectance measurement (less than 2 microns) of these devices indicate a reflectivity of less than 82%. MIM devices produced from 0.55 eV InGaAs have also been den=monstrated. In addition, conventional p/n InGaAs devices with record efficiencies (11.7% AM1) have been demonstrated.

Novel non-cytotoxic, bioactive and biodegradable hybrid materials based on polyurethanes/TiO2 for biomedical applications.

PubMed

González-García, Dulce M; Téllez Jurado, L; Jiménez-Gallegos, R; Rodríguez-Lorenzo, Luis M

2017-06-01

Titanium compounds have demonstrated great interfacial properties with biological tissues whereas a wide variety of polyurethanes have also been successfully probed in medical applications. However, studies about hybrids based on polyurethanes/TiO 2 for medical applications are scarce. The aim of this work is to design novel biodegradable hybrid materials based on polyurethanes/TiO 2 (80% organic-20% inorganic) and to perform a preliminary study of the potential applications in bone regeneration. The hybrids have been prepared by a sol-gel reaction using titanium isopropoxide as precursor of the inorganic component and polyurethane as the organic one. A series of polyurethanes has been prepared using different polyesters glycol succinate as soft segment, and 1,6-diisocyanatohexane (HDI) and butanediol (BD) as linear hard segment. The spectroscopy techniques used allow to confirm the formation of the required polyurethanes by the identification of bands related to carboxylic groups (COOH), and the amine groups (NH), and also the TiOH bonds and the bonds related to the interconnected network between the inorganic and the organic components from hybrids. The results from SEM/EDS show a homogeneous distribution of the inorganic component into the organic matrix. The nontoxic character of the hybrid (H400) was probed using MG-63 cell line with over 90% of cell viability. Finally, the formation of a hydroxyapatite layer in the material surface after 21days of soaking in SBF shows the bioactive character. Copyright © 2017 Elsevier B.V. All rights reserved.

Carbon Nanotube Interconnect

NASA Technical Reports Server (NTRS)

Li, Jun (Inventor); Meyyappan, Meyya (Inventor)

2006-01-01

Method and system for fabricating an electrical interconnect capable of supporting very high current densities ( 10(exp 6)-10(exp 10) Amps/sq cm), using an array of one or more carbon nanotubes (CNTs). The CNT array is grown in a selected spaced apart pattern, preferably with multi-wall CNTs, and a selected insulating material, such as SiOw, or SiuNv is deposited using CVD to encapsulate each CNT in the array. An exposed surface of the insulating material is planarized to provide one or more exposed electrical contacts for one or more CNTs.

3-D integrated heterogeneous intra-chip free-space optical interconnect.

PubMed

Ciftcioglu, Berkehan; Berman, Rebecca; Wang, Shang; Hu, Jianyun; Savidis, Ioannis; Jain, Manish; Moore, Duncan; Huang, Michael; Friedman, Eby G; Wicks, Gary; Wu, Hui

2012-02-13

This paper presents the first chip-scale demonstration of an intra-chip free-space optical interconnect (FSOI) we recently proposed. This interconnect system provides point-to-point free-space optical links between any two communication nodes, and hence constructs an all-to-all intra-chip communication fabric, which can be extended for inter-chip communications as well. Unlike electrical and other waveguide-based optical interconnects, FSOI exhibits low latency, high energy efficiency, and large bandwidth density, and hence can significantly improve the performance of future many-core chips. In this paper, we evaluate the performance of the proposed FSOI interconnect, and compare it to a waveguide-based optical interconnect with wavelength division multiplexing (WDM). It shows that the FSOI system can achieve significantly lower loss and higher energy efficiency than the WDM system, even with optimistic assumptions for the latter. A 1×1-cm2 chip prototype is fabricated on a germanium substrate with integrated photodetectors. Commercial 850-nm GaAs vertical-cavity-surface-emitting-lasers (VCSELs) and fabricated fused silica microlenses are 3-D integrated on top of the substrate. At 1.4-cm distance, the measured optical transmission loss is 5 dB, the crosstalk is less than -20 dB, and the electrical-to-electrical bandwidth is 3.3 GHz. The latter is mainly limited by the 5-GHz VCSEL.

1/f noise measurements for faster evaluation of electromigration in advanced microelectronics interconnections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beyne, Sofie, E-mail: sofie.beyne@imec.be; De Wolf, Ingrid; imec, Kapeldreef 75, B-3001 Leuven

The use of 1/f noise measurements is explored for the purpose of finding faster techniques for electromigration (EM) characterization in advanced microelectronic interconnects, which also enable a better understanding of its underlying physical mechanisms. Three different applications of 1/f noise for EM characterization are explored. First, whether 1/f noise measurements during EM stress can serve as an early indicator of EM damage. Second, whether the current dependence of the noise power spectral density (PSD) can be used for a qualitative comparison of the defect concentration of different interconnects and consequently also their EM lifetime t50. Third, whether the activation energiesmore » obtained from the temperature dependence of the 1/f noise PSD correspond to the activation energies found by means of classic EM tests. In this paper, the 1/f noise technique has been used to assess and compare the EM properties of various advanced integration schemes and different materials, as they are being explored by the industry to enable advanced interconnect scaling. More concrete, different types of copper interconnects and one type of tungsten interconnect are compared. The 1/f noise measurements confirm the excellent electromigration properties of tungsten and demonstrate a dependence of the EM failure mechanism on copper grain size and distribution, where grain boundary diffusion is found to be a dominant failure mechanism.« less

WDM mid-board optics for chip-to-chip wavelength routing interconnects in the H2020 ICT-STREAMS

NASA Astrophysics Data System (ADS)

Kanellos, G. T.; Pleros, N.

2017-02-01

Multi-socket server boards have emerged to increase the processing power density on the board level and further flatten the data center networks beyond leaf-spine architectures. Scaling however the number of processors per board puts current electronic technologies into challenge, as it requires high bandwidth interconnects and high throughput switches with increased number of ports that are currently unavailable. On-board optical interconnection has proved the potential to efficiently satisfy the bandwidth needs, but their use has been limited to parallel links without performing any smart routing functionality. With CWDM optical interconnects already a commodity, cyclical wavelength routing proposed to fit the datacom for rack-to-rack and board-to-board communication now becomes a promising on-board routing platform. ICT-STREAMS is a European research project that aims to combine WDM parallel on-board transceivers with a cyclical AWGR, in order to create a new board-level, chip-to-chip interconnection paradigm that will leverage WDM parallel transmission to a powerful wavelength routing platform capable to interconnect multiple processors with unprecedented bandwidth and throughput capacity. Direct, any-to-any, on-board interconnection of multiple processors will significantly contribute to further flatten the data centers and facilitate east-west communication. In the present communication, we present ICT-STREAMS on-board wavelength routing architecture for multiple chip-to-chip interconnections and evaluate the overall system performance in terms of throughput and latency for several schemes and traffic profiles. We also review recent advances of the ICT-STREAMS platform key-enabling technologies that span from Si in-plane lasers and polymer based electro-optical circuit boards to silicon photonics transceivers and photonic-crystal amplifiers.

Alcohol-related negative consequences among drinkers around the world.

PubMed

Graham, Kathryn; Bernards, Sharon; Knibbe, Ronald; Kairouz, Sylvia; Kuntsche, Sandra; Wilsnack, Sharon C; Greenfield, Thomas K; Dietze, Paul; Obot, Isidore; Gmel, Gerhard

2011-08-01

This paper examines (i) gender and country differences in negative consequences related to drinking; (ii) relative rates of different consequences; and (iii) country-level predictors of consequences. Multi-level analyses used survey data from the Gender, Alcohol, and Culture: An International Study (GENACIS) collaboration. Measures included 17 negative consequences grouped into (i) high endorsement acute, (ii) personal and (iii) social. Country-level measures included average frequency and quantity of drinking, percentage who were current drinkers, gross domestic product (GDP) and Human Development Index (HDI). Overall, the three groupings of consequences were reported by 44%, 12% and 7% of men and by 31%, 6% and 3% of women, respectively. More men than women endorsed all consequences, but gender differences were greatest for consequences associated with chronic drinking and social consequences related to male roles. The highest prevalence of consequences was in Uganda and lowest in Uruguay. Personal and social consequences were more likely in countries with higher usual quantity, fewer current drinkers and lower scores on GDP and HDI. However, significant interactions with individual-level quantity indicated a stronger relationship between consequences and usual quantity among drinkers in countries with lower quantity, more current drinkers and higher scores on GDP and HDI. Both gender and country need to be taken into consideration when assessing adverse drinking consequences. Individual measures of alcohol consumption and country-level variables are associated with experiencing such consequences. Additionally, country-level variables affect the strength of the relationship between usual quantity consumed by individuals and adverse consequences. © 2011 The Authors, Addiction © 2011 Society for the Study of Addiction.

Isocyanate exposure and asthma in the UK vehicle repair industry.

PubMed

Stocks, S J; Jones, K; Piney, M; Agius, R M

2015-12-01

Organic diisocyanates are a common cause of occupational asthma, particularly in motor vehicle repair (MVR) workers. The UK Health & Safety Laboratory provides screening for urinary hexamethylenediamine (UHDA), a biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI). The UK Surveillance of Work-related and Occupational Respiratory Disease scheme (SWORD) has collected reports of occupational asthma since 1996. To compare trends in HDI exposure with trends in the incidence of work-related asthma attributed to isocyanates or paint spraying in MVR workers reported to SWORD. Two-level regression models were used to estimate trends in UHDA levels and work-related asthma in MVR workers reported to SWORD. The direction and magnitude of the trends were compared descriptively. From 2006 to 2014, there was a significant decline in the number of urine samples with detectable levels of UHDA (odds ratio = 0.96; 95% confidence intervals 0.94-0.98) and minimal change in those over the guidance value (1.03; 1.00-1.06). Over the same period, there was a significant decline in all asthma cases attributed to isocyanates or paint spraying reported to SWORD (0.90; 0.86-0.94) and a non-significant decline among MVR workers (0.94; 0.86-1.02). The simultaneous decrease in HDI exposure and incident cases of asthma reported to SWORD is temporally consistent with a reduction in exposure to airborne isocyanate leading to a reduction in asthma. Although this is not direct evidence of a causal relationship between the two trends, it is suggestive. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

Isocyanate exposure and asthma in the UK vehicle repair industry

PubMed Central

Jones, K.; Piney, M.; Agius, R. M.

2015-01-01

Background Organic diisocyanates are a common cause of occupational asthma, particularly in motor vehicle repair (MVR) workers. The UK Health & Safety Laboratory provides screening for urinary hexamethylenediamine (UHDA), a biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI). The UK Surveillance of Work-related and Occupational Respiratory Disease scheme (SWORD) has collected reports of occupational asthma since 1996. Aims To compare trends in HDI exposure with trends in the incidence of work-related asthma attributed to isocyanates or paint spraying in MVR workers reported to SWORD. Methods Two-level regression models were used to estimate trends in UHDA levels and work-related asthma in MVR workers reported to SWORD. The direction and magnitude of the trends were compared descriptively. Results From 2006 to 2014, there was a significant decline in the number of urine samples with detectable levels of UHDA (odds ratio = 0.96; 95% confidence intervals 0.94–0.98) and minimal change in those over the guidance value (1.03; 1.00–1.06). Over the same period, there was a significant decline in all asthma cases attributed to isocyanates or paint spraying reported to SWORD (0.90; 0.86–0.94) and a non-significant decline among MVR workers (0.94; 0.86–1.02). Conclusions The simultaneous decrease in HDI exposure and incident cases of asthma reported to SWORD is temporally consistent with a reduction in exposure to airborne isocyanate leading to a reduction in asthma. Although this is not direct evidence of a causal relationship between the two trends, it is suggestive. PMID:26209793

The roles of contextual and individual social determinants of oral health-related quality of life in Brazilian adults.

PubMed

Vettore, Mario Vianna; Aqeeli, Amal

2016-04-01

This study investigated the relationship between contextual and individual social determinants of oral health-related quality of life (OHRQoL) in Brazilian adults. Data of 4594 Brazilian adults aged 35-44 years from the 2010 Brazilian Oral Health Survey were analysed. OHRQoL was measured using the Oral Impacts on Daily Performance (OIDP). Contextual socio-economic characteristics at city level assessed in 1991 and 2000 included social deprivation measured by Human Development Index (HDI) and income inequality (Gini index). Individual socio-economic characteristics included family income, schooling and number of goods. Covariates were age, sex, ethnicity and clinical oral measures. Multilevel multivariable Poisson regression analysis was carried to investigate the association of contextual and individual social characteristics with OIDP extent and with each OIDP item. Eating and cleaning teeth were the most reported daily activities influenced by oral conditions. In the adjusted analysis, low HDI 1991 and individual social characteristics (lower family income and lower schooling) were associated with OIDP extent. Sex (females) and all clinical oral measures were also associated with OIDP. Adults living in the cities with low HDI 1991 were more likely to have impact on eating and sleeping, whereas living in cities with high Gini index 1991 increased the prevalence of impact on emotional status, work and social contact. Low income was associated with all OIDP items. Poor contextual social determinants and lower individual socio-economic position are associated with worse OHRQoL among Brazilian adults, even after adjusting for individual socio-demographic and clinical oral health variables.

Inequality in the distribution of rheumatologists in Brazil: correlation with local of medical residency, Gross Domestic Product and Human Development Index.

PubMed

de Albuquerque, Cleandro Pires

2014-01-01

To assess the distribution of rheumatologists in Brazil and their correlation with Medical Residency specialization offer, Gross Domestic Product (Gdp) And Municipal Human Development Index (HDI-M) of units of the federation (UFs). Query to various official databases, data summarization by techniques for descriptive statistics and cross-referenced information. For correlation analysis, we used the Spearman correlation coefficient (r). There were 1229 rheumatologists regularly registered in the country. The Northern region had only 3.6% of the total (n = 44), while the Southeast had 42.2% (n = 519). The State capitals, added to the five largest municipalities in each UF, concentrated 75.8% of these specialists (n = 931). In total, 49.9% of rheumatologists offered treatment at SUS. A general ratio of 157,809 inhabitants per rheumatologist in Brazil was determined, but with wide variation among UFs with respect to this ratio. In the years 2000-2012, there were 593 Rheumatology Residency graduated physicians in Brazil. We observed a positive correlation among number of rheumatologists compared with GDP (r = 0.94), HDI-M of the State capitals (r = 0.77) and number of Rheumatology Residency graduated physicians (r = 0.79) in UFs. We noted a strong concentration of rheumatologists in State capitals and larger municipalities, with noticeable inequalities also between UFs and country regions. The distribution of these professionals accompanied GDP, HDI-M of the State capital and number of Rheumatology Residency graduated physicians, suggesting that factors related to income opportunities and human development and the place of speciality training may influence the geographical fixation of rheumatologists.

Design of a high definition imaging (HDI) analysis technique adapted to challenging environments

NASA Astrophysics Data System (ADS)

Laurent, Sophie Nathalie

2005-11-01

This dissertation describes a new comprehensive, flexible, highly-automated and computationally-robust approach for high definition imaging (HDI), a data acquisition technique for video-rate imaging through a turbulent atmosphere with telescopes not equipped with adaptive optics (AO). The HDI process, when applied to astronomical objects, involves the recording of a large number of images (10 3 -10 5 ) from the Earth and, in post-processing mode, selection of the very best ones to create a "perfect-seeing" diffraction-limited image via a three-step process. First, image registration is performed to find the exact position of the object in each field, using a template similar in size and shape to the target. The next task is to select only higher-quality fields using a criterion based on a measure of the blur in a region of interest around that object. The images are then shifted and added together to create an effective time exposure under ideal observing conditions. The last step's objective is to remove residual distortions in the image caused by the atmosphere and the optical equipment, using a point spread function (PSF), and a technique called "l 1 regularization" that has been adapted to this type of environment. In order to study the tenuous sodium atmospheres around solar system bodies, the three-step HDI procedure is done first in the white light domain (695-950 nm), where the Signal-to-Noise Ratio (SNR) of the images is high, resulting in an image with a sharp limb. Then the known selection and registration results are mapped to the simultaneously recorded spectral data (sodium lines: 589 and 589.6 nm), where the lower-SNR images cannot support independent registration and selection. Science results can then be derived from this spectral study to understand the structure of the atmospheres of moons and planets. This dissertation's contribution to space physics deals with locating the source of escaping sodium from Jupiter's moon lo. The results show, for the first time, that the source region is not homogeneously distributed around the small moon, but concentrated on its side of orbital motion. This identifies for modelers the physical mechanisms taking place around the most volcanic moon in the solar system.

Mortality differences between the foreign-born and locally-born population in France (2004-2007).

PubMed

Boulogne, Roxane; Jougla, Eric; Breem, Yves; Kunst, Anton E; Rey, Grégoire

2012-04-01

In contrast to the situation in many European countries, the mortality of immigrants in France has been little studied. The main reasons for the lack of studies are based on ethical and ideological considerations. The objective of this study is to explore mortality by country of birth in Metropolitan (i.e. 'mainland') France. Complete mortality data were used to study the relative risks of mortality of the foreign- and locally-born populations by gender, age and cause of death for the period 2004-2007 in Metropolitan France. Analyses were conducted by countries of birth grouped into geographic areas and by the Human Development Index (HDI). The differentials in mortality between foreign-born and locally-born populations were not homogeneous. The figures varied by age (higher foreign-born mortality for the young; lower mortality for migrants aged 15-64 years), gender (female migrants more frequently had higher relative mortality than men migrants), country of birth (Eastern European-born migrants had higher mortality, while those born in Morocco, Central Asia, 'other Asian countries' and America had lower mortality) and cause of death (migrant mortality was higher overall for deaths caused by infectious diseases and diabetes, and lower for violent death and neoplasm). Moreover, mortality relative risks for male, violent deaths and cancer were positively associated with country-of-birth HDI, while female mortality and infectious disease mortality were negatively associated with country-of-birth HDI. Some important caveats have to be considered because the study did not control for individuals socioeconomic position in France, or length of residence in the host country. A strong healthy migrant effect was suggested and its intensity varies with age and gender (which may reflect different reasons for migration). For some specific causes of death, a lifestyle effect seems to explain mortality differentials. The associations between HDI and mortality show that mortality trends are partly related to the educational, sanitary and economic conditions of the country of birth. Further studies would enrich the differential analysis of mortality by country of birth by contributing additional detailed data on socioeconomic and living conditions in the host country as well as in the country of origin. Copyright © 2012 Elsevier Ltd. All rights reserved.

Introduction to Rocket Propulsion

DTIC Science & Technology

1991-12-01

such as epoxies, MAPO (a trifunctional aziridinyl phosphine oxide), MT-4, various isocyanates, such a TDI, HDI, IPDI, and polyols such as trimethylol...propane (2) Burning rate catalysts, such as copper chromite (or chromate), ferrocene , and several less migratory derivatives of this organic iron

High density electronic circuit and process for making

DOEpatents

Morgan, William P.

1999-01-01

High density circuits with posts that protrude beyond one surface of a substrate to provide easy mounting of devices such as integrated circuits. The posts also provide stress relief to accommodate differential thermal expansion. The process allows high interconnect density with fewer alignment restrictions and less wasted circuit area than previous processes. The resulting substrates can be test platforms for die testing and for multi-chip module substrate testing. The test platform can contain active components and emulate realistic operational conditions, replacing shorts/opens net testing.

Petrophysical Properties of Twenty Drill Cores from the Los Azufres, Mexico, Geothermal Field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iglesias, E.R.; Contreras L., E.; Garcia G., A.

1987-01-20

For this study we selected 20 drill cores covering a wide range of depths (400-3000 m), from 15 wells, that provide a reasonable coverage of the field. Only andesite, the largely predominant rock type in the field, was included in this sample. We measured bulk density, grain (solids) density, effective porosity and (matrix) permeability on a considerable number of specimens taken from the cores; and inferred the corresponding total porosity and fraction of interconnected total porosity. We characterized the statistical distributions of the measured and inferred variables. The distributions of bulk density and grain density resulted approximately normal; the distributionsmore » of effective porosity, total porosity and fraction of total porosity turned out to be bimodal; the permeability distribution resulted highly skewed towards very small (1 mdarcy) values, though values as high as 400 mdarcies were measured. We also characterized the internal inhomogeneity of the cores by means of the ratio (standard deviation/mean) corresponding to the bulk density in each core (in average there are 9 specimens per core). The cores were found to present clearly discernible inhomogeneity; this quantitative characterization will help design new experimental work and interpret currently available and forthcoming results. We also found statistically significant linear correlations between total density and density of solids, effective porosity and total density, total porosity and total density, fraction of interconnected total porosity and the inverse of the effective porosity, total porosity and effective porosity; bulk density and total porosity also correlate with elevation. These results provide the first sizable and statistically detailed database available on petrophysical properties of the Los Azufres andesites. 1 tab., 16 figs., 4 refs.« less

Physical Properties of 3D Interconnected Graphite Networks - Aerographite

DTIC Science & Technology

2015-10-30

Figure 1.2: Influence of toluene injection rate per time on Aerographite density...................... 6 Figure 1.3: Influence of toluene injection ...densities ........................... 20 Figure 3.15: Capacitance as a function of carbon precursor injection rate .............................. 20...At a constant temperature profile of 200° C in the injection zone and 760° C in main zone, a carbon precursor (toluene) is injected with a

Thermoelectric Outer Planets Spacecraft (TOPS) electronic packaging and cabling development summary report

NASA Technical Reports Server (NTRS)

Dawe, R. H.; Arnett, J. C.

1974-01-01

Electronic packaging and cabling activities performed in support of the Thermoelectric Outer Planets Spacecraft (TOPS) Advanced Systems Technology (AST) project are detailed. It describes new electronic compartment, electronic assembly, and module concepts, and a new high-density, planar interconnection technique called discrete multilayer (DML). Development and qualification of high density cabling techniques, using small gage wire and microminiature connectors, are also reported.

Substrate Engineered Interconnected Graphene Electrodes with Ultrahigh Energy and Power Densities for Energy Storage Applications.

PubMed

Chaichi, Ardalan; Wang, Ying; Gartia, Manas Ranjan

2018-06-27

Supercapacitors combine the advantages of electrochemical storage technologies such as high energy density batteries and high power density capacitors. At 5-10 W h kg -1 , the energy densities of current supercapacitors are still significantly lower than the energy densities of lead acid (20-35 W h kg -1 ), Ni-metal hydride (40-100 W h kg -1 ), and Li-ion (120-170 W h kg -1 ) batteries. Recently, graphene-based supercapacitors have shown an energy density of 40-80 W h kg -1 . However, their performance is mainly limited because of the reversible agglomeration and restacking of individual graphene layers caused by π-π interactions. The restacking of graphene layers leads to significant decrease of ion-accessible surface area and the low capacitance of graphene-based supercapacitors. Here, we introduce a microstructure substrate-based method to produce a fully delaminated and stable interconnected graphene structure using flash reduction of graphene oxide in a few seconds. With this structure, we achieve the highest amount of volumetric capacitance obtained so far by any type of a pure carbon-based material. The affordable and scalable production method is capable of producing electrodes with an energy density of 0.37 W h cm -3 and a power density of 416.6 W cm -3 . This electrode maintained more than 91% of its initial capacitance after 5000 cycles. Moreover, combining with ionic liquid, this solvent-free graphene electrode material is highly promising for on-chip electronics, micro-supercapacitors, as well as high-power applications.

Optoelectronic interconnects for 3D wafer stacks

NASA Astrophysics Data System (ADS)

Ludwig, David E.; Carson, John C.; Lome, Louis S.

1996-01-01

Wafer and chip stacking are envisioned as a means of providing increased processing power within the small confines of a three-dimensional structure. Optoelectronic devices can play an important role in these dense 3-D processing electronic packages in two ways. In pure electronic processing, optoelectronics can provide a method for increasing the number of input/output communication channels within the layers of the 3-D chip stack. Non-free space communication links allow the density of highly parallel input/output ports to increase dramatically over typical edge bus connections. In hybrid processors, where electronics and optics play a role in defining the computational algorithm, free space communication links are typically utilized for, among other reasons, the increased network link complexity which can be achieved. Free space optical interconnections provide bandwidths and interconnection complexity unobtainable in pure electrical interconnections. Stacked 3-D architectures can provide the electronics real estate and structure to deal with the increased bandwidth and global information provided by free space optical communications. This paper provides definitions and examples of 3-D stacked architectures in optoelectronics processors. The benefits and issues of these technologies are discussed.

Optoelectronic interconnects for 3D wafer stacks

NASA Astrophysics Data System (ADS)

Ludwig, David; Carson, John C.; Lome, Louis S.

1996-01-01

Wafer and chip stacking are envisioned as means of providing increased processing power within the small confines of a three-dimensional structure. Optoelectronic devices can play an important role in these dense 3-D processing electronic packages in two ways. In pure electronic processing, optoelectronics can provide a method for increasing the number of input/output communication channels within the layers of the 3-D chip stack. Non-free space communication links allow the density of highly parallel input/output ports to increase dramatically over typical edge bus connections. In hybrid processors, where electronics and optics play a role in defining the computational algorithm, free space communication links are typically utilized for, among other reasons, the increased network link complexity which can be achieved. Free space optical interconnections provide bandwidths and interconnection complexity unobtainable in pure electrical interconnections. Stacked 3-D architectures can provide the electronics real estate and structure to deal with the increased bandwidth and global information provided by free space optical communications. This paper will provide definitions and examples of 3-D stacked architectures in optoelectronics processors. The benefits and issues of these technologies will be discussed.

Stretchable All-Gel-State Fiber-Shaped Supercapacitors Enabled by Macromolecularly Interconnected 3D Graphene/Nanostructured Conductive Polymer Hydrogels.

PubMed

Li, Panpan; Jin, Zhaoyu; Peng, Lele; Zhao, Fei; Xiao, Dan; Jin, Yong; Yu, Guihua

2018-05-01

Nanostructured conductive polymer hydrogels (CPHs) have been extensively applied in energy storage owing to their advantageous features, such as excellent electrochemical activity and relatively high electrical conductivity, yet the fabrication of self-standing and flexible electrode-based CPHs is still hampered by their limited mechanical properties. Herein, macromolecularly interconnected 3D graphene/nanostructured CPH is synthesized via self-assembly of CPHs and graphene oxide macrostructures. The 3D hybrid hydrogel shows uniform interconnectivity and enhanced mechanical properties due to the strong macromolecular interaction between the CPHs and graphene, thus greatly reducing aggregation in the fiber-shaping process. A proof-of-concept all-gel-state fibrous supercapacitor based on the 3D polyaniline/graphene hydrogel is fabricated to demonstrate the outstanding flexibility and mouldability, as well as superior electrochemical properties enabled by this 3D hybrid hydrogel design. The proposed device can achieve a large strain (up to ≈40%), and deliver a remarkable volumetric energy density of 8.80 mWh cm -3 (at power density of 30.77 mW cm -3 ), outperforming many fiber-shaped supercapacitors reported previously. The all-hydrogel design opens up opportunities in the fabrication of next-generation wearable and portable electronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

PICSiP: new system-in-package technology using a high bandwidth photonic interconnection layer for converged microsystems

NASA Astrophysics Data System (ADS)

Tekin, Tolga; Töpper, Michael; Reichl, Herbert

2009-05-01

Technological frontiers between semiconductor technology, packaging, and system design are disappearing. Scaling down geometries [1] alone does not provide improvement of performance, less power, smaller size, and lower cost. It will require "More than Moore" [2] through the tighter integration of system level components at the package level. System-in-Package (SiP) will deliver the efficient use of three dimensions (3D) through innovation in packaging and interconnect technology. A key bottleneck to the implementation of high-performance microelectronic systems, including SiP, is the lack of lowlatency, high-bandwidth, and high density off-chip interconnects. Some of the challenges in achieving high-bandwidth chip-to-chip communication using electrical interconnects include the high losses in the substrate dielectric, reflections and impedance discontinuities, and susceptibility to crosstalk [3]. Obviously, the incentive for the use of photonics to overcome the challenges and leverage low-latency and highbandwidth communication will enable the vision of optical computing within next generation architectures. Supercomputers of today offer sustained performance of more than petaflops, which can be increased by utilizing optical interconnects. Next generation computing architectures are needed with ultra low power consumption; ultra high performance with novel interconnection technologies. In this paper we will discuss a CMOS compatible underlying technology to enable next generation optical computing architectures. By introducing a new optical layer within the 3D SiP, the development of converged microsystems, deployment for next generation optical computing architecture will be leveraged.

Advanced materials and design for low temperature SOFCs

DOEpatents

Wachsman, Eric D.; Yoon, Heesung; Lee, Kang Taek; Camaratta, Matthew; Ahn, Jin Soo

2016-05-17

Embodiments of the invention are directed to SOFC with a multilayer structure comprising a porous ceramic cathode, optionally a cathodic triple phase boundary layer, a bilayer electrolyte comprising a cerium oxide comprising layer and a bismuth oxide comprising layer, an anion functional layer, and a porous ceramic anode with electrical interconnects, wherein the SOFC displays a very high power density at temperatures below 700.degree. C. with hydrogen or hydrocarbon fuels. The low temperature conversion of chemical energy to electrical energy allows the fabrication of the fuel cells using stainless steel or other metal alloys rather than ceramic conductive oxides as the interconnects.

Materials for high-density electronic packaging and interconnection

NASA Technical Reports Server (NTRS)

1990-01-01

Electronic packaging and interconnections are the elements that today limit the ultimate performance of advanced electronic systems. Materials in use today and those becoming available are critically examined to ascertain what actions are needed for U.S. industry to compete favorably in the world market for advanced electronics. Materials and processes are discussed in terms of the final properties achievable and systems design compatibility. Weak points in the domestic industrial capability, including technical, industrial philosophy, and political, are identified. Recommendations are presented for actions that could help U.S. industry regain its former leadership position in advanced semiconductor systems production.

A proposed holistic approach to on-chip, off-chip, test, and package interconnections

NASA Astrophysics Data System (ADS)

Bartelink, Dirk J.

1998-11-01

The term interconnection has traditionally implied a `robust' connection from a transistor or a group of transistors in an IC to the outside world, usually a PC board. Optimum system utilization is done from outside the IC. As an alternative, this paper addresses `unimpeded' transistor-to-transistor interconnection aimed at reaching the high circuit densities and computational capabilities of neighboring IC's. In this view, interconnections are not made to some human-centric place outside the IC world requiring robustness—except for system input and output connections. This unimpeded interconnect style is currently available only through intra-chip signal traces in `system-on-a-chip' implementations, as exemplified by embedded DRAMs. Because the traditional off-chip penalty in performance and wiring density is so large, a merging of complex process technologies is the only option today. It is suggested that, for system integration to move forward, the traditional robustness requirement inherited from conventional packaging interconnect and IC manufacturing test must be discarded. Traditional system assembly from vendor parts requires robustness under shipping, inspection and assembly. The trend toward systems on a chip signifies willingness by semiconductor companies to design and fabricate whole systems in house, so that `in-house' chip-to-chip assembly is not beyond reach. In this scenario, bare chips never leave the controlled environment of the IC fabricator while the two major contributors to off-chip signal penalty, ESD protection and the need to source a 50-ohm test head, are avoided. With in-house assembly, ESD protection can be eliminated with the precautions already familiar in plasma etching. Test interconnection impacts the fundamentals of IC manufacturing, particularly with clock speeds approaching 1GHz, and cannot be an afterthought. It should be an integral part of the chip-to-chip interconnection bandwidth optimization, because—as we must recognize—test is also performed using IC's. A system interconnection is proposed using multiple chips fabricated with conventional silicon processes, including MEMS technology. The system resembles an MCM that can be joined without committing to final assembly to perform at-speed testing. 50-Ohm test probes never load the circuit; only intended neighboring chips are ever connected. A `back-plane' chip provides the connection layers for both inter- and intra-chip signals and also serves as the probe card, in analogy with membrane probes now used for single-chip testing. Intra-chip connections, which require complicated connections during test that exactly match the product, are then properly made and all waveforms and loading conditions under test will be identical to those of the product. The major benefit is that all front-end chip technologies can be merged—logic, memory, RF, even passives. ESD protection is required only on external system connections. Manufacturing test information will accurately characterize process faults and thus avoid the Known-Good-Die problem that has slowed the arrival of conventional MCM's.

Early adolescent childbearing in low- and middle-income countries: associations with income inequity, human development and gender equality.

PubMed

Decker, Michele R; Kalamar, Amanda; Tunçalp, Özge; Hindin, Michelle J

2017-03-01

Reducing unwanted adolescent childbearing is a global priority. Little is known about how national-level economic and human development indicators relate to early adolescent childbearing. This ecological study evaluates associations of Gross Domestic Product (GDP), GINI index, Human Development Index (HDI) and Gender-related Development Index (GDI; i.e. the HDI adjusted for gender disparities) with early adolescent childbearing in 27 low- and middle-income countries (LMICs) across three time periods. Among women ages 18–24, prevalence estimates for early birth (<16 years) were calculated by nation, and weighted linear regressions evaluated associations between national indicators and early childbearing. To examine temporal trends, analyses were stratified by year groupings. Early adolescent childbearing declined over time, with the greatest change observed in Bangladesh (31.49% in 1996/7 to 19.69% in 2011). In adjusted models, GDI was negatively associated with early childbearing, i.e. early childbearing prevalence decreased as GDI increased. In the most recent time period, relative to the lowest GDI group, the average prevalence of early childbearing was significantly lower in the middle (-12.40, P < 0.00) and upper (-10.96, P = 0.03) tertiles after adjustment for the other indicators. These other indicators showed no consistent association with early childbearing. As national-level GDI increased, early adolescent childbearing declined. The GDI, which reflects human development adjusted for gender disparities in educational and economic prospects, was more consistently related to early adolescent childbearing than the absolute development prospects as given by the HDI. While creating gender equality is an important goal in and of itself, the findings emphasize the potential for improved national-level gender equitable development as a means to improve adolescents’ sexual and reproductive health.

Study of Barrier to Help Seeking and its Relationships with Disability in Patients with Headache.

PubMed

John, Deepa; Ram, Dushad; Sundarmurthy, Harsha; Rathod, Harshal; Rathod, Snehal

2016-10-01

Headache is among the first three most prevalent disorders with a wide treatment gap due to barriers in help seeking. Headache has been associated with disability. However, the relationship of barriers to help-seeking and disability are unexplored. To find out the barriers to help seeking and its relationship with headache related disability in patients with headache. In this hospital based cross-sectional study, 200 consecutive subjects with headache attending a tertiary care centre were recruited as per selection criteria and assessed with Sociodemographic & Clinical Proforma, Mini International Neuropsychiatric Interview (MINI), Barriers to Help Seeking Scale (BHSS), The Henry Ford Hospital Headache Disability Inventory (HDI). High mean score was observed on BHSS subscale need for control and self reliance (19.45; SD ±9.66) and minimizing problem and resignation (10.02; SD ±6.98). Mean score on the HDI was 25.65 (SD ± 14.09). Socioeconomic status of the patient was statistically significant and positively associated with need for control and self reliance (p=0.035), concrete barriers and distrust of care givers (p=0.039), emotional control (p=0.005), and privacy (p=0.002). Occupational status had significant association with need for control and self-reliance (p=0.01), minimizing problem and resignation (p=0.033), and emotional control (p=0.006). Score on hospital headache disability inventory significantly predicted the value of score on concrete barriers and distrust of caregivers domain of HDI (p=0.001). Autonomy and under estimation of seriousness of headache are common barriers to help seeking. Pattern of help seeking barriers may vary with socio-economic status and occupational status, while disability varies with gender and severity of headache. Headache associated disability is positively associated with concrete barriers.

Neuroblastoma among children in Southern and Eastern European cancer registries: Variations in incidence and temporal trends compared to US.

PubMed

Georgakis, Marios K; Dessypris, Nick; Baka, Margarita; Moschovi, Maria; Papadakis, Vassilios; Polychronopoulou, Sophia; Kourti, Maria; Hatzipantelis, Emmanuel; Stiakaki, Eftichia; Dana, Helen; Bouka, Evdoxia; Antunes, Luis; Bastos, Joana; Coza, Daniela; Demetriou, Anna; Agius, Domenic; Eser, Sultan; Gheorghiu, Raluca; Sekerija, Mario; Trojanowski, Maciej; Zagar, Tina; Zborovskaya, Anna; Ryzhov, Anton; Tragiannidis, Athanassios; Panagopoulou, Paraskevi; Steliarova-Foucher, Eva; Petridou, Eleni Th

2018-05-15

Neuroblastoma comprises the most common neoplasm during infancy (first year of life). Our study describes incidence of neuroblastoma in Southern-Eastern Europe (SEE), including - for the first time - the Nationwide Registry for Childhood Hematological Malignancies and Solid Tumors (NARECHEM-ST)/Greece, compared to the US population, while controlling for human development index (HDI). Age-adjusted incidence rates (AIR) were calculated for 1,859 childhood (0-14 years) neuroblastoma cases, retrieved from 13 collaborating SEE registries (1990-2016), and were compared to those of SEER/US (N = 3,166; 1990-2012); temporal trends were assessed using Poisson regression and Joinpoint analyses. The overall AIR was significantly lower in SEE (10.1/million) compared to SEER (11.7 per million); the difference was maximum during infancy (43.7 vs. 53.3 per million, respectively), when approximately one-third of cases were diagnosed. Incidence rates of neuroblastoma at ages <1 and 1-4 years were positively associated with HDI, whereas lower median age at diagnosis was correlated with higher overall AIR. Distribution of primary site and histology was similar in SEE and SEER. Neuroblastoma was slightly more common among males compared to females (male-to-female ratio: 1.1), mainly among SEE infants. Incidence trends decreased in infants in Slovenia, Cyprus and SEER and increased in Ukraine and Belarus. The lower incidence in SEE compared to SEER, especially in infants living in low HDI countries possibly indicates a lower level of overdiagnosis in SEE. Hence, increases in incidence rates in infancy noted in some subpopulations should be carefully monitored to avoid the unnecessary costs health impacts of tumors that could potentially spontaneously regress. © 2017 UICC.

Adherence to dietary guidelines and cardiovascular disease risk in the EPIC-NL cohort.

PubMed

Struijk, Ellen A; May, Anne M; Wezenbeek, Nick L W; Fransen, Heidi P; Soedamah-Muthu, Sabita S; Geelen, Anouk; Boer, Jolanda M A; van der Schouw, Yvonne T; Bueno-de-Mesquita, H Bas; Beulens, Joline W J

2014-09-20

Global and national dietary guidelines have been created to lower chronic disease risk. The aim of this study was to assess whether greater adherence to the WHO guidelines (Healthy Diet Indicator (HDI)); the Dutch guidelines for a healthy diet (Dutch Healthy Diet-index (DHD-index)); and the Dietary Approaches to Stop Hypertension (DASH) diet was associated with a lower risk of cardiovascular disease (CVD), coronary heart disease (CHD) or stroke. A prospective cohort study was conducted among 33,671 healthy Dutch men and women aged 20-70 years recruited into the EPIC-NL study during 1993-1997. We used Cox regression adjusted for relevant confounders to estimate the hazard ratios per standard deviation increase in score and 95% confidence intervals (CI) of the associations between the dietary guidelines and CVD, CHD and stroke risk. After an average follow-up of 12.2 years, 2752 CVD cases were documented, including 1630 CHD cases and 527 stroke cases. We found no association between the HDI (0.98, 95% CI 0.94; 1.02) or DHD-index (0.96, 95% CI 0.92; 1.00) and CVD incidence. Similar results were found for these guidelines and CHD or stroke incidence. Higher adherence to the DASH diet was significantly associated with a lower CVD (0.92, 95% CI 0.89; 0.96), CHD (0.91, 95% CI 0.86; 0.95), and stroke (0.90, 95% CI 0.82; 0.99) risk. The HDI and the DHD-index were not associated with CVD risk, while the DASH diet was significantly associated with a lower risk of developing CVD, CHD and stroke. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Reduced carbon intensity in highly developed countries: environmental kuznets curves for carbon dioxide

NASA Astrophysics Data System (ADS)

Kornhuber, Kai; Rybski, Diego; Costa, Luis; Reusser, Dominik E.; Kropp, Jürgen P.

2014-05-01

The Environmental Kuznets Curves (EKC) postulates that pollution increases with the income per capita up to a maximum, above which it decreases with the further increase in income per capita, i.e. following an inverse U-shape in the pollution vs. income per capita. It is commonly believed that EKC occurs for "local" pollutants such as nitrogen oxide and sulfur dioxide, but does not hold for CO2 emissions. This is attributed to the fact that while "local" pollutants cause a visible environmental damage on the local/regional scale (which authorities/governments seek to avoid), the consequences of CO2 emission have no immediate attributable local/regional consequences. We review EKC for CO2 exploring its relation between CO2 per capita and the Human Development Index (HDI) between 1990 and 2010 obtained from the World Bank database. We find evidence for a reduction in CO2 emissions per capita in highly developed countries. We propose a model according to which the emissions per capita of a country are composed of a component related to the actual state of development and a component related to the change of development. The model leads to four distinct cases of which two have EKC shape and two imply saturation. This outcome is in line with previously suggested qualitative relations. Our analysis indicates that the EKC shaped cases better describes the empirical values. We explore the less extreme version corresponding to the so-called conventional EKC and study the maximum of the fitted curve, providing a threshold-value for the HDI and a typical maximum value for the emissions per capita. We find that approx. 5 countries have crossed the CO2-HDI maximum, corresponding to approx. 1.5% of the world population.

Work disability benefits due to musculoskeletal disorders among Brazilian private sector workers.

PubMed

Vieira, E R; Albuquerque-Oliveira, P R; Barbosa-Branco, A

2011-05-14

To evaluate the prevalence and characteristics of disability benefits due to musculoskeletal disorders (MSD) granted to Brazilian private sector workers. This was a population-based epidemiological study of MSD-related benefits among registered private sector workers (n=32 959 329). The prevalence (benefits/10 000 workers/year) of work disability benefits was calculated by gender, age, state, Human Development Index (HDI), economic activity, MSD type and work-relatedness. The prevalence of MSD-related benefits in Brazil among registered private sector workers in 2008 was 93.6/10 000 workers. The prevalence increased with age, and was higher for women (112.2) than for men (88.1), although the former had shorter benefit duration. The gender-adjusted prevalence by state varied from 16.6 to 90.3 for non-work-related, and from 7.8 to 59.6 for work-related benefits. The Brazilian states with a high-very high HDI had the highest prevalence. The top four most common types of MSD-related benefits were due to back pain, intervertebral disc disorders, sinovitis/tenosynovitis and shoulder disorders. MSD is a frequent cause of work disability in Brazil. There were differences in prevalence among economic activities and between states grouped by HDI. This study demonstrates that further evaluation of the contributing factors associated with MSD-related disability benefits is required. Factors that should be considered include production processes, political organisation, socioeconomic and educational characteristics, the compensation and recording systems, and employee-employer power relationships. These factors may play an important role in the prevalence of MSD-related disability benefits, especially in countries with large socioeconomic iniquities such as Brazil.

The effect of oxidation on the enzyme-catalyzed hydrolytic biodegradation of poly(urethane)s.

PubMed

Labow, Rosalind S; Tang, Yiwen; McCloskey, Christopher B; Santerre, J Paul

2002-01-01

Although the biodegradation of polyurethanes (PU) by oxidative and hydrolytic agents has been studied extensively, few investigations have reported on the combination of their effects. Since neutrophils (PMN) arrive at an implanted device first and release HOCl, followed by monocyte-derived macrophages (MDM) which have potent esterase activities and oxidants of their own, the combined effect of oxidative and hydrolytic degradation on radiolabeled polycarbonate-polyurethanes (PCNU)s was investigated and compared to that of a polyester-PU (PESU) and a polyether-PU (PEU). The PCNUs were synthesized with PCN (MW = 1,000), and butanediol (14C-BD) and one of two diisocyanates, hexane-1,6-diisocyanate (14C-HDI) or methylene bis-p-phenyl diisocyanate (MDI). The PESU and PEU were synthesized using toluene-diisocyanate (14C-TDI), with polycaprolactone and polytetramethylene oxide as soft segments respectively, and ethylene diamine as the chain extender. The effect of pre-treatment with 0.1 mM HOC1 for 1 week on the HDI-based PCNUs and both TDI-based PUs resulted in a significant inhibition of radiolabel release (RR) elicited by cholesterol esterase (CE), when compared to buffer alone, whereas the MDI-based PCNU showed a small but significant increase. When PMN were activated on the HDI-based PCNU surface with phorbol myristate acetate (PMA), HOCl was released for 3 h, and was almost completely abolished by sodium azide (AZ). Simultaneously, the PMN-elicited RR, shown previously to be due to the esterolytic cleavage by serine proteases, was inhibited approximately 75% by PMA-activation of the cells, but significantly increased relative to the latter when AZ was added. Both in vitro oxidation by HOCl and the release of HOCI by PMN were associated with the inhibition of RR and suggest perturbations between oxidative and hydrolytic mechanisms of biodegradation.

Low density, resorcinol-formaldehyde aerogels

DOEpatents

Pekala, R.W.

1988-05-26

The polycondensation of resorcinol with formaldehyde under alkaline conditions results in the formation of surface functionalized polymer ''clusters''. The covalent crosslinking of these ''clusters'' produces gels which when processed under supercritical conditions, produce low density, organic aerogels (density less than or equal to100 mg/cc; cell size less than or equal to0.1 microns). The aerogels are transparent,dark red in color and consist of interconnected colloidal-like particles with diameters of about 100 A/degree/. These aerogels may be further carbonized to form low density carbon foams with cell size of about 0.1 micron. 1 fig., 1 tab.

Interconnected V2O5 nanoporous network for high-performance supercapacitors.

PubMed

Saravanakumar, B; Purushothaman, Kamatchi K; Muralidharan, G

2012-09-26

Vanadium pentoxide (V(2)O(5)) has attracted attention for supercapcitor applications because of its extensive multifunctional properties. In the present study, V(2)O(5) nanoporous network was synthesized via simple capping-agent-assisted precipitation technique and it is further annealed at different temperatures. The effect of annealing temperature on the morphology, electrochemical and structural properties, and stability upon oxidation-reduction cycling has been analyzed for supercapacitor application. We achieved highest specific capacitance of 316 F g(-1) for interconnected V(2)O(5) nanoporous network. This interconnected nanoporous network creates facile nanochannels for ion diffusion and facilitates the easy accessibility of ions. Moreover, after six hundred consecutive cycling processes the specific capacitance has changed only by 24%. A simple cost-effective preparation technique of V(2)O(5) nanoporous network with excellent capacitive behavior, energy density, and stability encourages its possible commercial exploitation for the development of high-performance supercapacitors.

Hexagonal boron nitride intercalated multi-layer graphene: a possible ultimate solution to ultra-scaled interconnect technology

NASA Astrophysics Data System (ADS)

Li, Yong-Jun; Sun, Qing-Qing; Chen, Lin; Zhou, Peng; Wang, Peng-Fei; Ding, Shi-Jin; Zhang, David Wei

2012-03-01

We proposed intercalation of hexagonal boron nitride (hBN) in multilayer graphene to improve its performance in ultra-scaled interconnects for integrated circuit. The effect of intercalated hBN layer in bilayer graphene is investigated using non-equilibrium Green's functions. We find the hBN intercalated bilayer graphene exhibit enhanced transport properties compared with pristine bilayer ones, and the improvement is attributed to suppression of interlayer scattering and good planar bonding condition of inbetween hBN layer. Based on these results, we proposed a via structure that not only benefits from suppressed interlayer scattering between multilayer graphene, but also sustains the unique electrical properties of graphene when many graphene layers are stacking together. The ideal current density across the structure can be as high as 4.6×109 A/cm2 at 1V, which is very promising for the future high-performance interconnect.

Accurate Modeling Method for Cu Interconnect

NASA Astrophysics Data System (ADS)

Yamada, Kenta; Kitahara, Hiroshi; Asai, Yoshihiko; Sakamoto, Hideo; Okada, Norio; Yasuda, Makoto; Oda, Noriaki; Sakurai, Michio; Hiroi, Masayuki; Takewaki, Toshiyuki; Ohnishi, Sadayuki; Iguchi, Manabu; Minda, Hiroyasu; Suzuki, Mieko

This paper proposes an accurate modeling method of the copper interconnect cross-section in which the width and thickness dependence on layout patterns and density caused by processes (CMP, etching, sputtering, lithography, and so on) are fully, incorporated and universally expressed. In addition, we have developed specific test patterns for the model parameters extraction, and an efficient extraction flow. We have extracted the model parameters for 0.15μm CMOS using this method and confirmed that 10%τpd error normally observed with conventional LPE (Layout Parameters Extraction) was completely dissolved. Moreover, it is verified that the model can be applied to more advanced technologies (90nm, 65nm and 55nm CMOS). Since the interconnect delay variations due to the processes constitute a significant part of what have conventionally been treated as random variations, use of the proposed model could enable one to greatly narrow the guardbands required to guarantee a desired yield, thereby facilitating design closure.

Device and circuit-level performance of carbon nanotube field-effect transistor with benchmarking against a nano-MOSFET.

PubMed

Tan, Michael Loong Peng; Lentaris, Georgios; Amaratunga Aj, Gehan

2012-08-19

The performance of a semiconducting carbon nanotube (CNT) is assessed and tabulated for parameters against those of a metal-oxide-semiconductor field-effect transistor (MOSFET). Both CNT and MOSFET models considered agree well with the trends in the available experimental data. The results obtained show that nanotubes can significantly reduce the drain-induced barrier lowering effect and subthreshold swing in silicon channel replacement while sustaining smaller channel area at higher current density. Performance metrics of both devices such as current drive strength, current on-off ratio (Ion/Ioff), energy-delay product, and power-delay product for logic gates, namely NAND and NOR, are presented. Design rules used for carbon nanotube field-effect transistors (CNTFETs) are compatible with the 45-nm MOSFET technology. The parasitics associated with interconnects are also incorporated in the model. Interconnects can affect the propagation delay in a CNTFET. Smaller length interconnects result in higher cutoff frequency.

Quantitative analysis of dislocation arrangements induced by electromigration in a passivated Al (0.5 wt % Cu) interconnect

NASA Astrophysics Data System (ADS)

Barabash, R. I.; Ice, G. E.; Tamura, N.; Valek, B. C.; Bravman, J. C.; Spolenak, R.; Patel, J. R.

2003-05-01

Electromigration during accelerated testing can induce plastic deformation in apparently undamaged Al interconnect lines as recently revealed by white beam scanning x-ray microdiffraction. In the present article, we provide a first quantitative analysis of the dislocation structure generated in individual micron-sized Al grains during an in situ electromigration experiment. Laue reflections from individual interconnect grains show pronounced streaking during the early stages of electromigration. We demonstrate that the evolution of the dislocation structure during electromigration is highly inhomogeneous and results in the formation of unpaired randomly distributed dislocations as well as geometrically necessary dislocation boundaries. Approximately half of all unpaired dislocations are grouped within the walls. The misorientation created by each boundary and density of unpaired individual dislocations is determined. The origin of the observed plastic deformation is considered in view of the constraints for dislocation arrangements under the applied electric field during electromigration.

Reliability of CGA/LGA/HDI Package Board/Assembly (Revision A)

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2013-01-01

This follow-up report presents reliability test results conducted by thermal cycling of five CGA assemblies evaluated under two extreme cycle profiles, representative of use for high-reliability applications. The thermal cycles ranged from a low temperature of 55 C to maximum temperatures of either 100 C or 125 C with slow ramp-up rate (3 C/min) and dwell times of about 15 minutes at the two extremes. Optical photomicrographs that illustrate key inspection findings of up to 200 thermal cycles are presented. Other information presented include an evaluation of the integrity of capacitors on CGA substrate after thermal cycling as well as process evaluation for direct assembly of an LGA onto PCB. The qualification guidelines, which are based on the test results for CGA/LGA/HDI packages and board assemblies, will facilitate NASA projects' use of very dense and newly available FPGA area array packages with known reliably and mitigation risks, allowing greater processing power in a smaller board footprint and lower system weight.

Spatial and gender scenario of literate life expectancy at birth in India.

PubMed

Chattopadhyay, Aparajita; Sinha, Kumar Chiman

2010-10-01

Measuring human quality of life is academically challenging. The human development index (HDI) substantially captures the overall country level status on human welfare. However, this index has some drawbacks. Therefore, Lutz composed a simple index in 1995 combining life expectancy and literacy, called literate life expectancy (LLE). LLE can be calculated for subpopulations depending on availability of data. This article captures the LLE in major states in India and the gender differences in LLE at rural and urban levels. The authors have tried to highlight the social development scenario in India and its major states by using this pure social indicator that intentionally does not use any economic measurement. The state scenario comprehensively depicts gender differentials in social development, and it calls for implementing development measures more seriously in states like Haryana, Bihar, Rajasthan, Madhya Pradesh, and Uttar Pradesh to reduce the gender gap. Being highly correlated with the HDI, the LLE index proves to be a very clear and simple comprehensive measure of social development for different subpopulations.

The power of light: socio-economic and environmental implications of a rural electrification program in Brazil

NASA Astrophysics Data System (ADS)

Borges da Silveira Bezerra, Paula; Ludovique Callegari, Camila; Ribas, Aline; Lucena, André F. P.; Portugal-Pereira, Joana; Koberle, Alexandre; Szklo, Alexandre; Schaeffer, Roberto

2017-09-01

Universal access to electricity is deemed critical for improving living standards and indispensable for eradicating poverty and achieving sustainable development. In 2003, the ‘Luz para Todos’ (LpT—Light for All) program was launched aiming to universalize access to electricity in Brazil. The program focused on rural and isolated areas, also targeting to bring development to those regions along with electrification. This paper evaluates the results of the LpT program in improving socio-economic development in the poorest regions of Brazil. After an initial qualitative analysis, an empirical quantitative assessment of the influence of increased electrification rates on the components of the Human Development Index (HDI) is performed. The empirical results of this study showed that electrification had a positive influence on all dimensions of the HDI, with the education component having the strongest effect. Although complementary policies were needed to achieve this, results show that electricity access is a major requirement to improve quality of life.

Bibliometric analysis of phytotechnologies for remediation: global scenario of research and applications.

PubMed

Koelmel, Jeremy; Prasad, M N V; Pershell, Karoline

2015-01-01

Phytoremediation is often a low cost alternative to conventional remediation. To assess trends, a bibliometric approach using data from SciVerse Scopus, SciVerseHub, and GoogleTM Trends was used. Globally there is a linear increase in publications containing the word phytoremediation as a percent of all published papers in SciVerse Hub, with China, India, and the Philippines concentrating relatively more research in phytoremediation. Furthermore there was an inverse correlation between a country's Human Development Index (HDI) and a country's phytoremediation research output as a percent of total research. Results show a focus on phytoremediation in countries with low HDI values. This suggests that academic experts are available for advancing phytoremediation applications in countries where the majority of the effected population do not have the education, finances, and political leverage to obtain expensive conventional remediation efforts on their land. Phytoremediation can combine expert advice with affected parties commitment and labor to help mitigate the harms of polluted landscapes.

Extended length microchannels for high density high throughput electrophoresis systems

DOEpatents

Davidson, James C.; Balch, Joseph W.

2000-01-01

High throughput electrophoresis systems which provide extended well-to-read distances on smaller substrates, thus compacting the overall systems. The electrophoresis systems utilize a high density array of microchannels for electrophoresis analysis with extended read lengths. The microchannel geometry can be used individually or in conjunction to increase the effective length of a separation channel while minimally impacting the packing density of channels. One embodiment uses sinusoidal microchannels, while another embodiment uses plural microchannels interconnected by a via. The extended channel systems can be applied to virtually any type of channel confined chromatography.

High density electronic circuit and process for making

DOEpatents

Morgan, W.P.

1999-06-29

High density circuits with posts that protrude beyond one surface of a substrate to provide easy mounting of devices such as integrated circuits are disclosed. The posts also provide stress relief to accommodate differential thermal expansion. The process allows high interconnect density with fewer alignment restrictions and less wasted circuit area than previous processes. The resulting substrates can be test platforms for die testing and for multi-chip module substrate testing. The test platform can contain active components and emulate realistic operational conditions, replacing shorts/opens net testing. 8 figs.

Percentage of Children Aged 5--17 Years Ever Receiving a Diagnosis of Learning Disability, United States, 2007--2009

MedlinePlus

... Ethnicity † and Family Income Group § --- National Health Interview Survey, ¶ United States, 2007--2009 * Based on parental response ... cdc.gov/nchs/hdi.htm . National Health Interview Survey 2007--2009 data. Available at http://www.cdc. ...

Merit Goods, Education Public Policy--India at Cross Roads

ERIC Educational Resources Information Center

Misra, Satya Narayan; Ghadai, Sanjaya Ku.

2015-01-01

Merit Goods have always received handsome attention and allocation from countries which have witnessed a congruence between high significant economic growth and Human Development Index (HDI). The Emerging Market Economies (EMEs) have become significant manufacturing hubs by universalizing education and improving their Incremental Capital Output…

Process Developed for Generating Ceramic Interconnects With Low Sintering Temperatures for Solid Oxide Fuel Cells

NASA Technical Reports Server (NTRS)

Zhong, Zhi-Min; Goldsby, Jon C.

2005-01-01

Solid oxide fuel cells (SOFCs) have been considered as premium future power generation devices because they have demonstrated high energy-conversion efficiency, high power density, and extremely low pollution, and have the flexibility of using hydrocarbon fuel. The Solid-State Energy Conversion Alliance (SECA) initiative, supported by the U.S. Department of Energy and private industries, is leading the development and commercialization of SOFCs for low-cost stationary and automotive markets. The targeted power density for the initiative is rather low, so that the SECA SOFC can be operated at a relatively low temperature (approx. 700 C) and inexpensive metallic interconnects can be utilized in the SOFC stack. As only NASA can, the agency is investigating SOFCs for aerospace applications. Considerable high power density is required for the applications. As a result, the NASA SOFC will be operated at a high temperature (approx. 900 C) and ceramic interconnects will be employed. Lanthanum chromite-based materials have emerged as a leading candidate for the ceramic interconnects. The interconnects are expected to co-sinter with zirconia electrolyte to mitigate the interface electric resistance and to simplify the processing procedure. Lanthanum chromites made by the traditional method are sintered at 1500 C or above. They react with zirconia electrolytes (which typically sinter between 1300 and 1400 C) at the sintering temperature of lanthanum chromites. It has been envisioned that lanthanum chromites with lower sintering temperatures can be co-fired with zirconia electrolyte. Nonstoichiometric lanthanum chromites can be sintered at lower temperatures, but they are unstable and react with zirconia electrolyte during co-sintering. NASA Glenn Research Center s Ceramics Branch investigated a glycine nitrate process to generate fine powder of the lanthanum-chromite-based materials. By simultaneously doping calcium on the lanthanum site, and cobalt and aluminum on the chromium site, we could sinter the materials below 1400 C. The doping concentrations were adjusted so that the thermal expansion coefficient matched that of the zirconia electrolyte. Also, the investigation was focused on stoichiometric compositions so that the materials would have better stability. Co-sintering and chemical compatibility with zirconia electrolyte were examined by X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy (line scanning and dot map). The results showed that the materials bond well, but do not react, with zirconia electrolyte. The electric conductivity of the materials measured at 900 C in air was about 20 S/cm.

Integrated Avionics System (IAS), Integrating 3-D Technology On A Spacecraft Panel

NASA Technical Reports Server (NTRS)

Hunter, Don J.; Halpert, Gerald

1999-01-01

As spacecraft designs converge toward miniaturization, and with the volumetric and mass challenges placed on avionics, programs will continue to advance the "state of the art" in spacecraft system development with new challenges to reduce power, mass and volume. Traditionally, the trend is to focus on high-density 3-D packaging technologies. Industry has made significant progress in 3-D technologies, and other related internal and external interconnection schemes. Although new technologies have improved packaging densities, a system packaging architecture is required that not only reduces spacecraft volume and mass budgets, but increase integration efficiencies, provide modularity and flexibility to accommodate multiple missions while maintaining a low recurring cost. With these challenges in mind, a novel system packaging approach incorporates solutions that provide broader environmental applications, more flexible system interconnectivity, scalability, and simplified assembly test and integration schemes. The Integrated Avionics System (IAS) provides for a low-mass, modular distributed or centralized packaging architecture which combines ridged-flex technologies, high-density COTS hardware and a new 3-D mechanical packaging approach, Horizontal Mounted Cube (HMC). This paper will describe the fundamental elements of the IAS, HMC hardware design, system integration and environmental test results.

Embedded optical interconnect technology in data storage systems

NASA Astrophysics Data System (ADS)

Pitwon, Richard C. A.; Hopkins, Ken; Milward, Dave; Muggeridge, Malcolm

2010-05-01

As both data storage interconnect speeds increase and form factors in hard disk drive technologies continue to shrink, the density of printed channels on the storage array midplane goes up. The dominant interconnect protocol on storage array midplanes is expected to increase to 12 Gb/s by 2012 thereby exacerbating the performance bottleneck in future digital data storage systems. The design challenges inherent to modern data storage systems are discussed and an embedded optical infrastructure proposed to mitigate this bottleneck. The proposed solution is based on the deployment of an electro-optical printed circuit board and active interconnect technology. The connection architecture adopted would allow for electronic line cards with active optical edge connectors to be plugged into and unplugged from a passive electro-optical midplane with embedded polymeric waveguides. A demonstration platform has been developed to assess the viability of embedded electro-optical midplane technology in dense data storage systems and successfully demonstrated at 10.3 Gb/s. Active connectors incorporate optical transceiver interfaces operating at 850 nm and are connected in an in-plane coupling configuration to the embedded waveguides in the midplane. In addition a novel method of passively aligning and assembling passive optical devices to embedded polymer waveguide arrays has also been demonstrated.

Optomechanical Design and Characterization of a Printed-Circuit-Board-Based Free-Space Optical Interconnect Package

NASA Astrophysics Data System (ADS)

Zheng, Xuezhe; Marchand, Philippe J.; Huang, Dawei; Kibar, Osman; Ozkan, Nur S. E.; Esener, Sadik C.

1999-09-01

We present a proof of concept and a feasibility demonstration of a practical packaging approach in which free-space optical interconnects (FSOI s) can be integrated simply on electronic multichip modules (MCM s) for intra-MCM board interconnects. Our system-level packaging architecture is based on a modified folded 4 f imaging system that has been implemented with only off-the-shelf optics, conventional electronic packaging, and passive-assembly techniques to yield a potentially low-cost and manufacturable packaging solution. The prototypical system as built supports 48 independent FSOI channels with 8 separate laser and detector chips, for which each chip consists of a one-dimensional array of 12 devices. All the chips are assembled on a single substrate that consists of a printed circuit board or a ceramic MCM. Optical link channel efficiencies of greater than 90% and interchannel cross talk of less than 20 dB at low frequency have been measured. The system is compact at only 10 in. 3 (25.4 cm 3 ) and is scalable, as it can easily accommodate additional chips as well as two-dimensional optoelectronic device arrays for increased interconnection density.

Enhancing Ecoefficiency in Shrimp Farming through Interconnected Ponds

PubMed Central

Barraza-Guardado, Ramón Héctor; Arreola-Lizárraga, José Alfredo; Juárez-García, Manuel; Juvera-Hoyos, Antonio; Casillas-Hernández, Ramón

2015-01-01

The future development of shrimp farming needs to improve its ecoefficiency. The purpose of this study was to evaluate water quality, flows, and nitrogen balance and production parameters on a farm with interconnected pond design to improve the efficiency of the semi-intensive culture of Litopenaeus vannamei ponds. The study was conducted in 21 commercial culture ponds during 180 days at densities of 30–35 ind m−2 and daily water exchange <2%. Our study provides evidence that by interconnecting ponds nutrient recycling is favored by promoting the growth of primary producers of the pond as chlorophyll a. Based on the mass balance and flow of nutrients this culture system reduces the flow of solid, particulate organic matter, and nitrogen compounds to the environment and significantly increases the efficiency of water (5 to 6.5 m3 kg−1 cycle−1), when compared with traditional culture systems. With this culture system it is possible to recover up to 34% of the total nitrogen entering the system, with production in excess of 4,000 kg ha−1 shrimp. We believe that the production system with interconnected ponds is a technically feasible model to improve ecoefficiency production of shrimp farming. PMID:26525070

Preparation of eugenol-based polyurethane

NASA Astrophysics Data System (ADS)

Li, Yupeng; Luo, Fang; Cheng, Chuanjie

2018-03-01

The regenerative eugenol was used as the starting material to prepare diol species by two steps, with a total yield of 28%. Furthermore, the prepared diol reacts with 1,6-hexadiisocyanate(HDI) to afford the corresponding polyurethane (PU). The structure of intermediates and PU are characterized by 1H-NMR or IR.

Conflict and Security Indices: A Summary of Open-Source Data

DTIC Science & Technology

2008-09-01

in the same dimensions as the HDI while adjusting for gender inequality . The Gender Empowerment Measure (GEM) measures the extent of women’s...measures gender inequality in three key areas: political participation and decision making power, as measured by women’s and men’s percentage share of

Baseline Testing of Ultracapacitors for the Next Generation Launch Technology (NGLT) Project. Revised

NASA Technical Reports Server (NTRS)

Eichenberg, Dennis J.

2005-01-01

The NASA John H. Glenn Research Center initiated baseline testing of ultracapacitors for the Next Generation Launch Transportation (NGLT) project to obtain empirical data for determining the feasibility of using ultracapacitors for the project. There are large transient loads associated with NGLT that require either a very large primary energy source or an energy storage system. The primary power source used for these tests is a proton exchange membrane (PEM) fuel cell. The energy storage system can consist of devices such as batteries, flywheels, or ultracapacitors. Ultracapacitors were used for these tests. Ultracapacitors are ideal for applications such as NGLT where long life, maintenance-free operation, and excellent low-temperature performance is essential. State-of-the-art symmetric ultracapacitors were used for these tests. The ultracapacitors were interconnected in an innovative configuration to minimize interconnection impedance. PEM fuel cells provide excellent energy density, but not good power density. Ultracapacitors provide excellent power density, but not good energy density. The combination of PEM fuel cells and ultracapacitors provides a power source with excellent energy density and power density. The life of PEM fuel cells is shortened significantly by large transient loads. Ultracapacitors used in conjunction with PEM fuel cells reduce the transient loads applied to the fuel cell, and thus appreciably improves its life. PEM fuel cells were tested with and without ultracapacitors, to determine the benefits of ultracapacitors. The report concludes that the implementation of symmetric ultracapacitors in the NGLT power system can provide significant improvements in power system performance and reliability.

Baseline Testing of Ultracapacitors for the Next Generation Launch Technology (NGLT) Project

NASA Technical Reports Server (NTRS)

Eichenberg, Dennis J.

2004-01-01

The NASA John H. Glenn Research Center initiated baseline testing of ultracapacitors for the Next Generation Launch Transportation (NGLT) project to obtain empirical data for determining the feasibility of using ultracapacitors for the project. There are large transient loads associated with NGLT that require either a very large primary energy source or an energy storage system. The primary power source used for these tests is a proton exchange membrane (PEM) fuel cell. The energy storage system can consist of devices such as batteries, flywheels, or ultracapacitors. Ultracapacitors were used for these tests. Ultracapacitors are ideal for applications such as NGLT where long life, maintenance-free operation, and excellent low-temperature performance is essential. State-of-the-art symmetric ultracapacitors were used for these tests. The ultracapacitors were interconnected in an innovative configuration to minimize interconnection impedance. PEM fuel cells provide excellent energy density, but not good power density. Ultracapacitors provide excellent power density, but not good energy density. The combination of PEM fuel cells and ultracapacitors provides a power source with excellent energy density and power density. The life of PEM fuel cells is shortened significantly by large transient loads. Ultracapacitors used in conjunction with PEM fuel cells reduce the transient loads applied to the fuel cell, and thus appreciably improves its life. PEM fuel cells were tested with and without ultracapacitors, to determine the benefits of ultracapacitors. The report concludes that the implementation of symmetric ultracapacitors in the NGLT power system can provide significant improvements in power system performance and reliability.

Non-identical multiplexing promotes chimera states

NASA Astrophysics Data System (ADS)

Ghosh, Saptarshi; Zakharova, Anna; Jalan, Sarika

2018-01-01

We present the emergence of chimeras, a state referring to coexistence of partly coherent, partly incoherent dynamics in networks of identical oscillators, in a multiplex network consisting of two non-identical layers which are interconnected. We demonstrate that the parameter range displaying the chimera state in the homogeneous first layer of the multiplex networks can be tuned by changing the link density or connection architecture of the same nodes in the second layer. We focus on the impact of the interconnected second layer on the enlargement or shrinking of the coupling regime for which chimeras are displayed in the homogeneous first layer. We find that a denser homogeneous second layer promotes chimera in a sparse first layer, where chimeras do not occur in isolation. Furthermore, while a dense connection density is required for the second layer if it is homogeneous, this is not true if the second layer is inhomogeneous. We demonstrate that a sparse inhomogeneous second layer which is common in real-world complex systems can promote chimera states in a sparse homogeneous first layer.

Materials for High-Density Electronic Packaging and Interconnection

DTIC Science & Technology

1990-04-10

play a prominent role in the future. Glass and Porcelain The earliest use of electronic ceramics was as insulators for carrying telegraph lines...Administration 61L & CORES , (Ot. stem. SAI WCJm 76. LOISS (C". SUMt *oW WVCf B’%2101 Constitution Avenue. N W Washington, D.C. 20418 Washington. D.C. 20301 G...Density Packaging 84 Tape Automated Bonding 87 Diamond 88 Superconductors 88 Composites 89 Materials for Very-High-Frequency Digital Systems 91

Super-stretchable metallic interconnects on polymer with a linear strain of up to 100%

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arafat, Yeasir; Dutta, Indranath; Panat, Rahul, E-mail: Rahul.panat@wsu.edu

Metal interconnects in flexible and wearable devices are heterogeneous metal-polymer systems that are expected to sustain large deformation without failure. The principal strategy to make strain tolerant interconnect lines on flexible substrates has comprised of creating serpentine structures of metal films with either in-plane or out-of-plane waves, using porous substrates, or using highly ductile materials such as gold. The wavy and helical serpentine patterns preclude high-density packing of interconnect lines on devices, while ductile materials such as Au are cost prohibitive for real world applications. Ductile copper films can be stretched if bonded to the substrate, but show high levelmore » of cracking beyond few tens of % strain. In this paper, we demonstrate a material system consisting of Indium metal film over an elastomer (PDMS) with a discontinuous Cr layer such that the metal interconnect can be stretched to extremely high linear strain (up to 100%) without any visible cracks. Such linear strain in metal interconnects exceeds that reported in literature and is obtained without the use of any geometrical manipulations or porous substrates. Systematic experimentation is carried out to explain the mechanisms that allow the Indium film to sustain the high strain level without failure. The islands forming the discontinuous Cr layer are shown to move apart from each other during stretching without delamination, providing strong adhesion to the Indium film while accommodating the large strain in the system. The Indium film is shown to form surface wrinkles upon release from the large strain, confirming its strong adhesion to PDMS. A model is proposed based upon the observations that can explain the high level of stretch-ability of the Indium metal film over the PDMS substrate.« less

Plastic straw: future of high-speed signaling

NASA Astrophysics Data System (ADS)

Song, Ha Il; Jin, Huxian; Bae, Hyeon-Min

2015-11-01

The ever-increasing demand for bandwidth triggered by mobile and video Internet traffic requires advanced interconnect solutions satisfying functional and economic constraints. A new interconnect called E-TUBE is proposed as a cost-and-power-effective all-electrical-domain wideband waveguide solution for high-speed high-volume short-reach communication links. The E-TUBE achieves an unprecedented level of performance in terms of bandwidth-per-carrier frequency, power, and density without requiring a precision manufacturing process unlike conventional optical/waveguide solutions. The E-TUBE exhibits a frequency-independent loss-profile of 4 dB/m and has nearly 20-GHz bandwidth over the V band. A single-sideband signal transmission enabled by the inherent frequency response of the E-TUBE renders two-times data throughput without any physical overhead compared to conventional radio frequency communication technologies. This new interconnect scheme would be attractive to parties interested in high throughput links, including but not limited to, 100/400 Gbps chip-to-chip communications.

Dielectric cracking produced by electromigration in microelectronic interconnects

NASA Astrophysics Data System (ADS)

Chiras, S.; Clarke, D. R.

2000-12-01

The development of stress during electromigration along Al lines, constrained within a dielectric in a coplanar test configuration, is measured. It is shown that, above a certain threshold current density, cracking of the dielectric is induced in the vicinity of the anode. Cracking of the dielectric leads to loss of mechanical constraint on the aluminum conductor which, in turn, leads to increases in electrical resistance with continued current flow. The electromigration-induced stresses are determined from the measured frequency shifts induced in a novel ruby strain sensor embedded immediately beneath the interconnect line on a sapphire substrate. The transparency of the sapphire substrate also facilitated the observation of a hitherto unreported form of dielectric cracking, namely cracking from the interconnect along internal interfaces. The observations of dielectric cracking are in agreement with a recent fracture mechanics model. Analysis of the stress data, together with the results of finite element calculations of the strain energy release rate for crack extension, gives a quantitative estimate of the effective valence Z*(=1.3±0.2) for aluminum.

Device and circuit-level performance of carbon nanotube field-effect transistor with benchmarking against a nano-MOSFET

PubMed Central

2012-01-01

The performance of a semiconducting carbon nanotube (CNT) is assessed and tabulated for parameters against those of a metal-oxide-semiconductor field-effect transistor (MOSFET). Both CNT and MOSFET models considered agree well with the trends in the available experimental data. The results obtained show that nanotubes can significantly reduce the drain-induced barrier lowering effect and subthreshold swing in silicon channel replacement while sustaining smaller channel area at higher current density. Performance metrics of both devices such as current drive strength, current on-off ratio (Ion/Ioff), energy-delay product, and power-delay product for logic gates, namely NAND and NOR, are presented. Design rules used for carbon nanotube field-effect transistors (CNTFETs) are compatible with the 45-nm MOSFET technology. The parasitics associated with interconnects are also incorporated in the model. Interconnects can affect the propagation delay in a CNTFET. Smaller length interconnects result in higher cutoff frequency. PMID:22901374

Neighborhoods in Development: Human Development Index and Self-Organizing Maps

ERIC Educational Resources Information Center

Rende, Sevinc; Donduran, Murat

2013-01-01

The Human Development Index (HDI) has been instrumental in broadening the discussion of economic development beyond money-metric progress, in particular, by ranking a country against other countries in terms of the well being of their citizens. We propose self-organizing maps to explore similarities among countries using the components of the HDI…

Rethinking the Place of Children and Youth

ERIC Educational Resources Information Center

Schissel, Bernard; Schissel, Wendy

2008-01-01

According to the annual United Nations declarations based on the Human Development Index (HDI), Canada remains one of the best places in the world in which to live. Ironically, this declaration of socio-economic superiority does not extend to the young people in the society. Although post-industrial societies like Canada and the United States may…

Using the HDI camera with Tohono O’odham Tribal Community College Students

NASA Astrophysics Data System (ADS)

Garmany, Catharine D.

2017-01-01

Tohono O’odham Community College is a small two-year tribal college, located at the foot of I'oligam Du'ag, also known as Kitt Peak. In recognition and appreciation of Kitt Peak National Observatory’s location on the Tohono O’odham reservation, NOAO has worked with the college to offer an introduction astronomy class when requested. The class has been taught by NOAO scientific staff and post docs, and the lab component of this 4-credit class has been carried out at Kitt Peak. With support from the WIYN0.9-m Consortium, students have been able to observe on the 0.9m telescope. Most recently they have used the HDI camera for an evening, which has been a highlight of the class that students always note in their final evaluation. I will describe challenges and rewards in developing and maintaining this class, including identifying post docs and graduate students who are able to teach it. However, we feel the challenges are worth it: this may be the only formal astronomy class offered at a tribal college.

The Dynamics of Democracy, Development and Cultural Values

PubMed Central

Spaiser, Viktoria; Ranganathan, Shyam; Mann, Richard P.; Sumpter, David J. T.

2014-01-01

Over the past decades many countries have experienced rapid changes in their economies, their democratic institutions and the values of their citizens. Comprehensive data measuring these changes across very different countries has recently become openly available. Between country similarities suggest common underlying dynamics in how countries develop in terms of economy, democracy and cultural values. We apply a novel Bayesian dynamical systems approach to identify the model which best captures the complex, mainly non-linear dynamics that underlie these changes. We show that the level of Human Development Index (HDI) in a country drives first democracy and then higher emancipation of citizens. This change occurs once the countries pass a certain threshold in HDI. The data also suggests that there is a limit to the growth of wealth, set by higher emancipation. Having reached a high level of democracy and emancipation, societies tend towards equilibrium that does not support further economic growth. Our findings give strong empirical evidence against a popular political science theory, known as the Human Development Sequence. Contrary to this theory, we find that implementation of human-rights and democratisation precede increases in emancipative values. PMID:24905920

The dynamics of democracy, development and cultural values.

PubMed

Spaiser, Viktoria; Ranganathan, Shyam; Mann, Richard P; Sumpter, David J T

2014-01-01

Over the past decades many countries have experienced rapid changes in their economies, their democratic institutions and the values of their citizens. Comprehensive data measuring these changes across very different countries has recently become openly available. Between country similarities suggest common underlying dynamics in how countries develop in terms of economy, democracy and cultural values. We apply a novel Bayesian dynamical systems approach to identify the model which best captures the complex, mainly non-linear dynamics that underlie these changes. We show that the level of Human Development Index (HDI) in a country drives first democracy and then higher emancipation of citizens. This change occurs once the countries pass a certain threshold in HDI. The data also suggests that there is a limit to the growth of wealth, set by higher emancipation. Having reached a high level of democracy and emancipation, societies tend towards equilibrium that does not support further economic growth. Our findings give strong empirical evidence against a popular political science theory, known as the Human Development Sequence. Contrary to this theory, we find that implementation of human-rights and democratisation precede increases in emancipative values.

The efficacy of oral habit modification on headache.

PubMed

Agha-Hosseini, Farzaneh; Sheykhbahaei, Nafiseh; Mirzaii-Dizgah, Iraj; Fatehi, Farzad

2017-12-01

Headache is the most common complaint of patients suffering from temporomandibular joint disorders (TMDs). Thus, temporomandibular joint (TMJ) examinations maybe necessary in patients with headache. Considering the high prevalence of bruxism and TMDs in patients with headache the effects of conservative TMD treatment on headache should be assessed. Patients were questioned about headaches in the past three months. Those responding affirmatively to this question were examined for TMD and bruxism. After the examinations, 219 patients remained in the study and received self-management instructions. Patients were requested to modify oral habits except when eating or sleeping. The degree of pain (visual analogue scale), headache disability index (HDI), frequency of headaches (FH) per month and TMD intensity were evaluated. The median levels of pain, HDI, FH, and TMD intensity were 8, 44, 8, and 7, respectively, before modifying oral habits and decreased to 4, 24, 2, and 3, respectively, after intervention. These decreases were statistically significant. Having patients maintain free space between the teeth and relax muscles can be an efficient method to treat headache and TMD, especially when repeated frequently.

Obesity and socioeconomic status in developing countries: a systematic review

PubMed Central

Dinsa, GD; Goryakin, Y; Fumagalli, E; Suhrcke, M

2012-01-01

Summary We undertook a systematic review of studies assessing the association between socioeconomic status (SES) and measured obesity in low- and middle-income countries (defined by the World Bank as countries with per capita income up to US$12,275) among children, men and women. The evidence on the subject has grown significantly since an earlier influential review was published in 2004. We find that in low-income countries or in countries with low human development index (HDI), the association between SES and obesity appears to be positive for both men and women: the more affluent and/or those with higher educational attainment tend to be more likely to be obese. However, in middle-income countries or in countries with medium HDI, the association becomes largely mixed for men and mainly negative for women. This particular shift appears to occur at an even lower level of per capita income than suggested by an influential earlier review. By contrast, obesity in children appears to be predominantly a problem of the rich in low- and middle-income countries. PMID:22764734

High density circuit technology, part 2

NASA Technical Reports Server (NTRS)

Wade, T. E.

1982-01-01

A multilevel metal interconnection system for very large scale integration (VLSI) systems utilizing polyimides as the interlayer dielectric material is described. A complete characterization of polyimide materials is given as well as experimental methods accomplished using a double level metal test pattern. A low temperature, double exposure polyimide patterning procedure is also presented.

WHO guidelines for a healthy diet and mortality from cardiovascular disease in European and American elderly: the CHANCES project.

PubMed

Jankovic, Nicole; Geelen, Anouk; Streppel, Martinette T; de Groot, Lisette Cpgm; Kiefte-de Jong, Jessica C; Orfanos, Philippos; Bamia, Christina; Trichopoulou, Antonia; Boffetta, Paolo; Bobak, Martin; Pikhart, Hynek; Kee, Frank; O'Doherty, Mark G; Buckland, Genevieve; Woodside, Jayne; Franco, Oscar H; Ikram, M Arfan; Struijk, Ellen A; Pajak, Andrzej; Malyutina, Sofia; Kubinova, Růžena; Wennberg, Maria; Park, Yikyung; Bueno-de-Mesquita, H Bas; Kampman, Ellen; Feskens, Edith J

2015-10-01

Cardiovascular disease (CVD) represents a leading cause of mortality worldwide, especially in the elderly. Lowering the number of CVD deaths requires preventive strategies targeted on the elderly. The objective was to generate evidence on the association between WHO dietary recommendations and mortality from CVD, coronary artery disease (CAD), and stroke in the elderly aged ≥60 y. We analyzed data from 10 prospective cohort studies from Europe and the United States comprising a total sample of 281,874 men and women free from chronic diseases at baseline. Components of the Healthy Diet Indicator (HDI) included saturated fatty acids, polyunsaturated fatty acids, mono- and disaccharides, protein, cholesterol, dietary fiber, and fruit and vegetables. Cohort-specific HRs adjusted for sex, education, smoking, physical activity, and energy and alcohol intakes were pooled by using a random-effects model. During 3,322,768 person-years of follow-up, 12,492 people died of CVD. An increase of 10 HDI points (complete adherence to an additional WHO guideline) was, on average, not associated with CVD mortality (HR: 0.94; 95% CI: 0.86, 1.03), CAD mortality (HR: 0.99; 95% CI: 0.85, 1.14), or stroke mortality (HR: 0.95; 95% CI: 0.88, 1.03). However, after stratification of the data by geographic region, adherence to the HDI was associated with reduced CVD mortality in the southern European cohorts (HR: 0.87; 95% CI: 0.79, 0.96; I(2) = 0%) and in the US cohort (HR: 0.85; 95% CI: 0.83, 0.87; I(2) = not applicable). Overall, greater adherence to the WHO dietary guidelines was not significantly associated with CVD mortality, but the results varied across regions. Clear inverse associations were observed in elderly populations in southern Europe and the United States.

WHO guidelines for a healthy diet and mortality from cardiovascular disease in European and American elderly: the CHANCES project12

PubMed Central

Jankovic, Nicole; Geelen, Anouk; Streppel, Martinette T; de Groot, Lisette CPGM; Kiefte-de Jong, Jessica C; Orfanos, Philippos; Bamia, Christina; Trichopoulou, Antonia; Boffetta, Paolo; Bobak, Martin; Pikhart, Hynek; Kee, Frank; O’Doherty, Mark G; Buckland, Genevieve; Woodside, Jayne; Franco, Oscar H; Ikram, M Arfan; Struijk, Ellen A; Pajak, Andrzej; Malyutina, Sofia; Kubinova, Růžena; Wennberg, Maria; Park, Yikyung; Bueno-de-Mesquita, H Bas; Kampman, Ellen; Feskens, Edith J

2015-01-01

Background: Cardiovascular disease (CVD) represents a leading cause of mortality worldwide, especially in the elderly. Lowering the number of CVD deaths requires preventive strategies targeted on the elderly. Objective: The objective was to generate evidence on the association between WHO dietary recommendations and mortality from CVD, coronary artery disease (CAD), and stroke in the elderly aged ≥60 y. Design: We analyzed data from 10 prospective cohort studies from Europe and the United States comprising a total sample of 281,874 men and women free from chronic diseases at baseline. Components of the Healthy Diet Indicator (HDI) included saturated fatty acids, polyunsaturated fatty acids, mono- and disaccharides, protein, cholesterol, dietary fiber, and fruit and vegetables. Cohort-specific HRs adjusted for sex, education, smoking, physical activity, and energy and alcohol intakes were pooled by using a random-effects model. Results: During 3,322,768 person-years of follow-up, 12,492 people died of CVD. An increase of 10 HDI points (complete adherence to an additional WHO guideline) was, on average, not associated with CVD mortality (HR: 0.94; 95% CI: 0.86, 1.03), CAD mortality (HR: 0.99; 95% CI: 0.85, 1.14), or stroke mortality (HR: 0.95; 95% CI: 0.88, 1.03). However, after stratification of the data by geographic region, adherence to the HDI was associated with reduced CVD mortality in the southern European cohorts (HR: 0.87; 95% CI: 0.79, 0.96; I2 = 0%) and in the US cohort (HR: 0.85; 95% CI: 0.83, 0.87; I2 = not applicable). Conclusion: Overall, greater adherence to the WHO dietary guidelines was not significantly associated with CVD mortality, but the results varied across regions. Clear inverse associations were observed in elderly populations in southern Europe and the United States. PMID:26354545

Study of Barrier to Help Seeking and its Relationships with Disability in Patients with Headache

PubMed Central

John, Deepa; Sundarmurthy, Harsha; Rathod, Harshal; Rathod, Snehal

2016-01-01

Introduction Headache is among the first three most prevalent disorders with a wide treatment gap due to barriers in help seeking. Headache has been associated with disability. However, the relationship of barriers to help-seeking and disability are unexplored. Aim To find out the barriers to help seeking and its relationship with headache related disability in patients with headache. Materials and Methods In this hospital based cross-sectional study, 200 consecutive subjects with headache attending a tertiary care centre were recruited as per selection criteria and assessed with Sociodemographic & Clinical Proforma, Mini International Neuropsychiatric Interview (MINI), Barriers to Help Seeking Scale (BHSS), The Henry Ford Hospital Headache Disability Inventory (HDI). Results High mean score was observed on BHSS subscale need for control and self reliance (19.45; SD ±9.66) and minimizing problem and resignation (10.02; SD ±6.98). Mean score on the HDI was 25.65 (SD ± 14.09). Socioeconomic status of the patient was statistically significant and positively associated with need for control and self reliance (p=0.035), concrete barriers and distrust of care givers (p=0.039), emotional control (p=0.005), and privacy (p=0.002). Occupational status had significant association with need for control and self-reliance (p=0.01), minimizing problem and resignation (p=0.033), and emotional control (p=0.006). Score on hospital headache disability inventory significantly predicted the value of score on concrete barriers and distrust of caregivers domain of HDI (p=0.001). Conclusion Autonomy and under estimation of seriousness of headache are common barriers to help seeking. Pattern of help seeking barriers may vary with socio-economic status and occupational status, while disability varies with gender and severity of headache. Headache associated disability is positively associated with concrete barriers. PMID:27891430

Global temporal patterns of pancreatic cancer and association with socioeconomic development.

PubMed

Wong, Martin C S; Jiang, Johnny Y; Liang, Miaoyin; Fang, Yuan; Yeung, Ming Sze; Sung, Joseph J Y

2017-06-09

Pancreatic cancer induces a substantial global burden. We examined its global incidence/mortality rates and their correlation with socioeconomic development (Human Development Index [HDI] and Gross Domestic Product [GDP] in 2000 as proxy measures). Data on age-standardized incidence/mortality rates in 2012 were retrieved from the GLOBOCAN database. Temporal patterns in 1998-2007 were assessed for 39 countries according to gender. The Average Annual Percent Change (AAPC) of the incidence/mortality trends was evaluated using joinpoint regression analysis. The age-standardized incidence ranged between 0.8-8.9/100,000. When compared among countries, Brazil (AAPC = 10.4, 95%C.I. = 0.8,21) and France (AAPC = 4.7, 95%C.I. = 3.6,5.9) reported the highest incidence rise in men. The greatest increase in women was reported in Thailand (AAPC = 7, 95%C.I. = 2.1,12.1) and Ecuador (AAPC = 4.3, 95%C.I. = 1.3,7.3). For mortality, the Philippines (APCC = 4.3, 95%C.I. = 2,6.6) and Croatia (AAPC = 2, 95% C.I. = 0,3.9) reported the biggest increase among men. The Philippines (AAPC = 5.8, 95% C.I. 4.5,7.2) and Slovakia (AAPC = 3.1, 95% C.I. 0.9,5.3) showed the most prominent rise among women. Its incidence was positively correlated with HDI (men: r = 0.66; women: r = 0.70) and GDP (men: r = 0.29; women: r = 0.28, all p < 0.05), and similarly for mortality (men: r = 0.67; women: r = 0.72 [HDI]; men: r = 0.23; women: r = 0.28 [GDP]). In summary, the incidence and mortality of pancreatic cancer were rising in many countries, requiring regular surveillance.

Persisting inequalities in survival patterns of childhood neuroblastoma in Southern and Eastern Europe and the effect of socio-economic development compared with those of the US.

PubMed

Panagopoulou, Paraskevi; Georgakis, Marios K; Baka, Margarita; Moschovi, Maria; Papadakis, Vassilios; Polychronopoulou, Sophia; Kourti, Maria; Hatzipantelis, Emmanuel; Stiakaki, Eftichia; Dana, Helen; Tragiannidis, Athanasios; Bouka, Evdoxia; Antunes, Luis; Bastos, Joana; Coza, Daniela; Demetriou, Anna; Agius, Domenic; Eser, Sultan; Gheorghiu, Raluca; Šekerija, Mario; Trojanowski, Maciej; Žagar, Tina; Zborovskaya, Anna; Ryzhov, Anton; Dessypris, Nick; Morgenstern, Daniel; Petridou, Eleni Th

2018-06-01

Neuroblastoma outcomes vary with disease characteristics, healthcare delivery and socio-economic indicators. We assessed survival patterns and prognostic factors for patients with neuroblastoma in 11 Southern and Eastern European (SEE) countries versus those in the US, including-for the first time-the Nationwide Registry for Childhood Hematological Malignancies and Solid Tumours (NARECHEM-ST)/Greece. Overall survival (OS) was calculated in 13 collaborating SEE childhood cancer registries (1829 cases, ∼1990-2016) and Surveillance, Epidemiology, and End Results (SEER), US (3072 cases, 1990-2012); Kaplan-Meier curves were used along with multivariable Cox regression models assessing the effect of age, gender, primary tumour site, histology, Human Development Index (HDI) and place of residence (urban/rural) on survival. The 5-year OS rates varied widely among the SEE countries (Ukraine: 45%, Poland: 81%) with the overall SEE rate (59%) being significantly lower than in SEER (77%; p < 0.001). In the common registration period within SEE (2000-2008), no temporal trend was noted as opposed to a significant increase in SEER. Age >12 months (hazard ratio [HR]: 2.8-4.7 in subsequent age groups), male gender (HR: 1.1), residence in rural areas (HR: 1.3), living in high (HR: 2.2) or medium (HR: 2.4) HDI countries and specific primary tumour location were associated with worse outcome; conversely, ganglioneuroblastoma subtype (HR: 0.28) was associated with higher survival rate. Allowing for the disease profile, children with neuroblastoma in SEE, especially those in rural areas and lower HDI countries, fare worse than patients in the US, mainly during the early years after diagnosis; this may be attributed to presumably modifiable socio-economic and healthcare system performance differentials warranting further research. Copyright © 2018 Elsevier Ltd. All rights reserved.

Fabrication of Fresnel micro lens array in borosilicate glass by F2-laser ablation for glass interposer application

NASA Astrophysics Data System (ADS)

Brusberg, Lars; Neitz, Marcel; Schröder, Henning; Fricke-Begemann, Thomas; Ihlemann, Jürgen

2014-03-01

The future need for more bandwidth forces the development of optical transmission solutions for rack-to-rack, boardto- board and chip-to-chip interconnects. The goals are significant reduction of power consumption, highest density and potential for bandwidth scalability to overcome the limitations of the systems today with mostly copper based interconnects. For system integration the enabling of thin glass as a substrate material for electro-optical components with integrated micro-optics for efficient light coupling to integrated optical waveguides or fibers is becoming important. Our glass based packaging approach merges micro-system packaging and glass integrated optics. This kind of packaging consists of a thin glass substrate with integrated micro lenses providing a platform for photonic component assembly and optical fiber or waveguide interconnection. Thin glass is commercially available in panel and wafer size and characterizes excellent optical and high frequency properties. That makes it perfect for microsystem packaging. A suitable micro lens approach has to be comparable with different commercial glasses and withstand post-processing like soldering. A benefit of using laser ablated Fresnel lenses is the planar integration capability in the substrate for highest integration density. In the paper we introduce our glass based packaging concept and the Fresnel lens design for different scenarios like chip-to-fiber, chip-to-optical-printed-circuit-board coupling. Based on the design the Fresnel lenses were fabricated by using a 157 nm fluorine laser ablation system.

Controlling microstructure and mechanical properties of the new microelectronic interconnect alloys

NASA Astrophysics Data System (ADS)

Mutuku, Francis M.

An in-depth understanding of the physics of solidification could lead to the optimization of the properties of micro-electronic interconnects. Sn is the base material in the billions of interconnects in devices such as smart phones. These interconnects are formed by melting and solidifying a solder alloy (e.g. SnAgCu) in situ. But Sn has a low symmetry structure, Sn nucleation from the solder melt is complex and the morphology of the Sn and Sn alloys precipitates that form during solidification can vary tremendously (along with resultant mechanical properties). The effect of processing parameters on the solidification behavior, microstructure, and properties must be carefully addressed. Strong evidence adduced in this study shows that under many conditions, when cooling near eutectic SnAgCu from the melt, Ag3Sn nucleates before beta-Sn. The difficulty in the nucleation of beta-Sn provides a window of time between the nucleation of Ag3Sn precipitates and of beta-Sn solidification within which the Ag3Sn precipitate morphology can be manipulated. Thus distinct variations in precipitate number density, and inter-particle spacing were observed for different thermal histories, e.g. for different cooling rates. The average number density of Ag3Sn particles and the area of the pseudo-eutectic phase were observed to increase with increase in the Ag concentration, and with increase in the cooling rate. The shear strength and shear fatigue life increased with increase in the area fraction of the pseudo-eutectic phase. Upon aging of SnAgCu solder joints at an elevated temperature, the Ag3Sn particles coarsened, and became less effective in impeding dislocation motion. Consequently, the shear strength and shear fatigue performance degraded. On the other hand, alloys with constituents that formed solid solutions in Sn, such as small concentrations of Bi or Sb registered less degradation in both shear strength and shear fatigue life upon aging.

Facilitated charge transport in ternary interconnected electrodes for flexible supercapacitors with excellent power characteristics

NASA Astrophysics Data System (ADS)

Chen, Wanjun; He, Yongmin; Li, Xiaodong; Zhou, Jinyuan; Zhang, Zhenxing; Zhao, Changhui; Gong, Chengshi; Li, Shuankui; Pan, Xiaojun; Xie, Erqing

2013-11-01

Flexible and high performance supercapacitors are very critical in modern society. In order to develop the flexible supercapacitors with high power density, free-standing and flexible three-dimensional graphene/carbon nanotubes/MnO2 (3DG/CNTs/MnO2) composite electrodes with interconnected ternary 3D structures were fabricated, and the fast electron and ion transport channels were effectively constructed in the rationally designed electrodes. Consequently, the obtained 3DG/CNTs/MnO2 composite electrodes exhibit superior specific capacitance and rate capability compared to 3DG/MnO2 electrodes. Furthermore, the 3DG/CNTs/MnO2 based asymmetric supercapacitor demonstrates the maximum energy and power densities of 33.71 W h kg-1 and up to 22 727.3 W kg-1, respectively. Moreover, the asymmetric supercapacitor exhibits excellent cycling stability with 95.3% of the specific capacitance maintained after 1000 cycle tests. Our proposed synthesis strategy to construct the novel ternary 3D structured electrodes can be efficiently applied to other high performance energy storage/conversion systems.Flexible and high performance supercapacitors are very critical in modern society. In order to develop the flexible supercapacitors with high power density, free-standing and flexible three-dimensional graphene/carbon nanotubes/MnO2 (3DG/CNTs/MnO2) composite electrodes with interconnected ternary 3D structures were fabricated, and the fast electron and ion transport channels were effectively constructed in the rationally designed electrodes. Consequently, the obtained 3DG/CNTs/MnO2 composite electrodes exhibit superior specific capacitance and rate capability compared to 3DG/MnO2 electrodes. Furthermore, the 3DG/CNTs/MnO2 based asymmetric supercapacitor demonstrates the maximum energy and power densities of 33.71 W h kg-1 and up to 22 727.3 W kg-1, respectively. Moreover, the asymmetric supercapacitor exhibits excellent cycling stability with 95.3% of the specific capacitance maintained after 1000 cycle tests. Our proposed synthesis strategy to construct the novel ternary 3D structured electrodes can be efficiently applied to other high performance energy storage/conversion systems. Electronic supplementary information (ESI) available: Additional experimental details; calculations of the specific capacitances, and energy and power densities; additional SEM and optical images; XPS results; additional electrochemical results. See DOI: 10.1039/c3nr03923d

China on the Mekong: Legitimacy Imperatives and Policy Case Studies

DTIC Science & Technology

2013-12-01

1  B.  IMPORTANCE ................................................................................................1  C.  PROBLEMS...gross domestic product GMS Greater Mekong Subregion HDI human development indicators MRC Mekong River Commission MOU memoranda of understanding MPS...home affect China’s policies along the Mekong River? B. IMPORTANCE A careful investigation of PRC policies on the Mekong River will contribute to a

Education, Human Development and Quality of Life: Measurement Issues and Implications for India

ERIC Educational Resources Information Center

Narayana, M. R.

2009-01-01

This paper analyses and compares the measurement of indicators and variables in the construction of education index in Human Development Index (HDI) at the global, national and 18 sub-national human development reports in India since 1990. The results show non-comparability of measurement of the education indicators and variables. This implies…

Housing Quality and Access to Material and Learning Resources within the Home Environment in Developing Countries

ERIC Educational Resources Information Center

Bradley, Robert H.; Putnick, Diane L.

2012-01-01

This study examined home environment conditions (housing quality, material resources, formal and informal learning materials) and their relations with the Human Development Index (HDI) in 28 developing countries. Home environment conditions in these countries varied widely. The quality of housing and availability of material resources at home were…

Structure that encapsulates lithium metal for high energy density battery anode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, Yi; Yan, Kai; Chu, Steven

A battery includes 1) an anode, 2) a cathode, and 3) an electrolyte disposed between the anode and the cathode. The anode includes a current collector and an interfacial layer disposed over the current collector, and the interfacial layer includes an array of interconnected, protruding regions that define spaces.

Three-Dimensional Honeycomb-Like Porous Carbon with Both Interconnected Hierarchical Porosity and Nitrogen Self-Doping from Cotton Seed Husk for Supercapacitor Electrode.

PubMed

Chen, Hui; Wang, Gang; Chen, Long; Dai, Bin; Yu, Feng

2018-06-08

Hierarchical porous structures with surface nitrogen-doped porous carbon are current research topics of interest for high performance supercapacitor electrode materials. Herein, a three-dimensional (3D) honeycomb-like porous carbon with interconnected hierarchical porosity and nitrogen self-doping was synthesized by simple and cost-efficient one-step KOH activation from waste cottonseed husk (a-CSHs). The obtained a-CSHs possessed hierarchical micro-, meso-, and macro-pores, a high specific surface area of 1694.1 m²/g, 3D architecture, and abundant self N-doping. Owing to these distinct features, a-CSHs delivered high specific capacitances of 238 F/g and 200 F/g at current densities of 0.5 A/g and 20 A/g, respectively, in a 6 mol/L KOH electrolyte, demonstrating good capacitance retention of 84%. The assembled a-CSHs-based symmetric supercapacitor also displayed high specific capacitance of 52 F/g at 0.5 A/g, with an energy density of 10.4 Wh/Kg at 300 W/Kg, and 91% capacitance retention after 5000 cycles at 10 A/g.

Facilitated charge transport in ternary interconnected electrodes for flexible supercapacitors with excellent power characteristics.

PubMed

Chen, Wanjun; He, Yongmin; Li, Xiaodong; Zhou, Jinyuan; Zhang, Zhenxing; Zhao, Changhui; Gong, Chengshi; Li, Shuankui; Pan, Xiaojun; Xie, Erqing

2013-12-07

Flexible and high performance supercapacitors are very critical in modern society. In order to develop the flexible supercapacitors with high power density, free-standing and flexible three-dimensional graphene/carbon nanotubes/MnO2 (3DG/CNTs/MnO2) composite electrodes with interconnected ternary 3D structures were fabricated, and the fast electron and ion transport channels were effectively constructed in the rationally designed electrodes. Consequently, the obtained 3DG/CNTs/MnO2 composite electrodes exhibit superior specific capacitance and rate capability compared to 3DG/MnO2 electrodes. Furthermore, the 3DG/CNTs/MnO2 based asymmetric supercapacitor demonstrates the maximum energy and power densities of 33.71 W h kg(-1) and up to 22,727.3 W kg(-1), respectively. Moreover, the asymmetric supercapacitor exhibits excellent cycling stability with 95.3% of the specific capacitance maintained after 1000 cycle tests. Our proposed synthesis strategy to construct the novel ternary 3D structured electrodes can be efficiently applied to other high performance energy storage/conversion systems.

Early stage of plastic deformation in thin films undergoing electromigration

NASA Astrophysics Data System (ADS)

Valek, B. C.; Tamura, N.; Spolenak, R.; Caldwell, W. A.; MacDowell, A. A.; Celestre, R. S.; Padmore, H. A.; Bravman, J. C.; Batterman, B. W.; Nix, W. D.; Patel, J. R.

2003-09-01

Electromigration occurs when a high current density drives atomic motion from the cathode to the anode end of a conductor, such as a metal interconnect line in an integrated circuit. While electromigration eventually causes macroscopic damage, in the form of voids and hillocks, the earliest stage of the process when the stress in individual micron-sized grains is still building up is largely unexplored. Using synchrotron-based x-ray microdiffraction during an in-situ electromigration experiment, we have discovered an early prefailure mode of plastic deformation involving preferential dislocation generation and motion and the formation of a subgrain structure within individual grains of a passivated Al (Cu) interconnect. This behavior occurs long before macroscopic damage (hillocks and voids) is observed.

Bacterial-cellulose-derived interconnected meso-microporous carbon nanofiber networks as binder-free electrodes for high-performance supercapacitors

NASA Astrophysics Data System (ADS)

Hao, Xiaodong; Wang, Jie; Ding, Bing; Wang, Ya; Chang, Zhi; Dou, Hui; Zhang, Xiaogang

2017-06-01

Bacterial cellulose (BC), a typical biomass prepared from the microbial fermentation process, has been proved that it can be an ideal platform for design of three-dimensional (3D) multifunctional nanomaterials in energy storage and conversion field. Here we developed a simple and general silica-assisted strategy for fabrication of interconnected 3D meso-microporous carbon nanofiber networks by confine nanospace pyrolysis of sustainable BC, which can be used as binder-free electrodes for high-performance supercapacitors. The synthesized carbon nanofibers exhibited the features of interconnected 3D networks architecture, large surface area (624 m2 g-1), mesopores-dominated hierarchical porosity, and high graphitization degree. The as-prepared electrode (CN-BC) displayed a maximum specific capacitance of 302 F g-1 at a current density of 0.5 A g-1, high-rate capability and good cyclicity in 6 M KOH electrolyte. This work, together with cost-effective preparation strategy to make high-value utilization of cheap biomass, should have significant implications in the green and mass-producible energy storage.

Electromigration resistance in a short three-contact interconnect tree

NASA Astrophysics Data System (ADS)

Chang, C. W.; Choi, Z.-S.; Thompson, C. V.; Gan, C. L.; Pey, K. L.; Choi, W. K.; Hwang, N.

2006-05-01

Electromigration has been characterized in via-terminated interconnect lines with additional vias in the middle, creating two adjacent segments that can be stressed independently. The mortality of a segment was found to depend on the direction and magnitude of the current in the adjacent segment, confirming that there is not a fixed value of the product of the current density and segment length, jL, that defines immortality in individual segments that are part of a multisegment interconnect tree. Instead, it is found that the probability of failure of a multisegment tree increases with the increasing value of an effective jL product defined in earlier work. However, contrary to expectations, the failures were still observed when (jL)eff was less than the critical jL product for which lines were found to be immortal in single-segment test structures. It is argued that this is due to reservoir effects associated with unstressed segments or due to liner failure at the central via. Multisegment test structures are therefore shown to reveal more types of failure mechanisms and mortality conditions that are not found in tests with single-segment structures.

Porous honeycomb structures formed from interconnected MnO2 sheets on CNT-coated substrates for flexible all-solid-state supercapacitors

NASA Astrophysics Data System (ADS)

Ko, Wen-Yin; Chen, You-Feng; Lu, Ke-Ming; Lin, Kuan-Jiuh

2016-01-01

The use of lightweight and easily-fabricated MnO2/carbon nanotube (CNT)-based flexible networks as binder-free electrodes and a polyvinyl alcohol/H2SO4 electrolyte for the formation of stretchable solid-state supercapacitors was examined. The active electrodes were fabricated from 3D honeycomb porous MnO2 assembled from cross-walled and interconnected sheet-architectural MnO2 on CNT-based plastic substrates (denoted as honeycomb MnO2/CNT textiles).These substrates were fabricated through a simple two-step procedure involving the coating of multi-walled carbon nanotubes (MWCNTs) onto commercial textiles by a dipping-drying process and subsequent electrodeposition of the interconnected MnO2 sheets onto the MWCNT-coated textile. With such unique MnO2 architectures integrated onto CNT flexible films, good performance was achieved with a specific capacitance of 324 F/g at 0.5 A/g. A maximum energy density of 7.2 Wh/kg and a power density as high as 3.3 kW/kg were exhibited by the honeycomb MnO2/CNT network device, which is comparable to the performance of other carbon-based and metal oxide/carbon-based solid-state supercapacitor devices. Specifically, the long-term cycling stability of this material is excellent, with almost no loss of its initial capacitance and good Coulombic efficiency of 82% after 5000 cycles. These impressive results identify these materials as a promising candidate for use in environmentally friendly, low-cost, and high-performance flexible energy-storage devices.

Porous honeycomb structures formed from interconnected MnO2 sheets on CNT-coated substrates for flexible all-solid-state supercapacitors

PubMed Central

Ko, Wen-Yin; Chen, You-Feng; Lu, Ke-Ming; Lin, Kuan-Jiuh

2016-01-01

The use of lightweight and easily-fabricated MnO2/carbon nanotube (CNT)-based flexible networks as binder-free electrodes and a polyvinyl alcohol/H2SO4 electrolyte for the formation of stretchable solid-state supercapacitors was examined. The active electrodes were fabricated from 3D honeycomb porous MnO2 assembled from cross-walled and interconnected sheet-architectural MnO2 on CNT-based plastic substrates (denoted as honeycomb MnO2/CNT textiles).These substrates were fabricated through a simple two-step procedure involving the coating of multi-walled carbon nanotubes (MWCNTs) onto commercial textiles by a dipping-drying process and subsequent electrodeposition of the interconnected MnO2 sheets onto the MWCNT-coated textile. With such unique MnO2 architectures integrated onto CNT flexible films, good performance was achieved with a specific capacitance of 324 F/g at 0.5 A/g. A maximum energy density of 7.2 Wh/kg and a power density as high as 3.3 kW/kg were exhibited by the honeycomb MnO2/CNT network device, which is comparable to the performance of other carbon-based and metal oxide/carbon-based solid-state supercapacitor devices. Specifically, the long-term cycling stability of this material is excellent, with almost no loss of its initial capacitance and good Coulombic efficiency of 82% after 5000 cycles. These impressive results identify these materials as a promising candidate for use in environmentally friendly, low-cost, and high-performance flexible energy-storage devices. PMID:26726724

Interconnected carbon nanosheets derived from hemp for ultrafast supercapacitors with high energy.

PubMed

Wang, Huanlei; Xu, Zhanwei; Kohandehghan, Alireza; Li, Zhi; Cui, Kai; Tan, Xuehai; Stephenson, Tyler James; King'ondu, Cecil K; Holt, Chris M B; Olsen, Brian C; Tak, Jin Kwon; Harfield, Don; Anyia, Anthony O; Mitlin, David

2013-06-25

We created unique interconnected partially graphitic carbon nanosheets (10-30 nm in thickness) with high specific surface area (up to 2287 m(2) g(-1)), significant volume fraction of mesoporosity (up to 58%), and good electrical conductivity (211-226 S m(-1)) from hemp bast fiber. The nanosheets are ideally suited for low (down to 0 °C) through high (100 °C) temperature ionic-liquid-based supercapacitor applications: At 0 °C and a current density of 10 A g(-1), the electrode maintains a remarkable capacitance of 106 F g(-1). At 20, 60, and 100 °C and an extreme current density of 100 A g(-1), there is excellent capacitance retention (72-92%) with the specific capacitances being 113, 144, and 142 F g(-1), respectively. These characteristics favorably place the materials on a Ragone chart providing among the best power-energy characteristics (on an active mass normalized basis) ever reported for an electrochemical capacitor: At a very high power density of 20 kW kg(-1) and 20, 60, and 100 °C, the energy densities are 19, 34, and 40 Wh kg(-1), respectively. Moreover the assembled supercapacitor device yields a maximum energy density of 12 Wh kg(-1), which is higher than that of commercially available supercapacitors. By taking advantage of the complex multilayered structure of a hemp bast fiber precursor, such exquisite carbons were able to be achieved by simple hydrothermal carbonization combined with activation. This novel precursor-synthesis route presents a great potential for facile large-scale production of high-performance carbons for a variety of diverse applications including energy storage.

Frequency-dependent failure mechanisms of nanocrystalline gold interconnect lines under general alternating current

NASA Astrophysics Data System (ADS)

Luo, X. M.; Zhang, B.; Zhang, G. P.

2014-09-01

Thermal fatigue failure of metallization interconnect lines subjected to alternating currents (AC) is becoming a severe threat to the long-term reliability of micro/nanodevices with increasing electrical current density/power. Here, thermal fatigue failure behaviors and damage mechanisms of nanocrystalline Au interconnect lines on the silicon glass substrate have been investigated by applying general alternating currents (the pure alternating current coupled with a direct current (DC) component) with different frequencies ranging from 0.05 Hz to 5 kHz. We observed both thermal fatigue damages caused by Joule heating-induced cyclic strain/stress and electromigration (EM) damages caused by the DC component. Besides, the damage formation showed a strong electrically-thermally-mechanically coupled effect and frequency dependence. At lower frequencies, thermal fatigue damages were dominant and the main damage forms were grain coarsening with grain boundary (GB) cracking/voiding and grain thinning. At higher frequencies, EM damages took over and the main damage forms were GB cracking/voiding of smaller grains and hillocks. Furthermore, the healing effect of the reversing current was considered to elucidate damage mechanisms of the nanocrystalline Au lines generated by the general AC. Lastly, a modified model was proposed to predict the lifetime of the nanocrystalline metal interconnect lines, i.e., that was a competing drift velocity-based approach based on the threshold time required for reverse diffusion/healing to occur.

Interconnect patterns for printed organic thermoelectric devices with large fill factors

NASA Astrophysics Data System (ADS)

Gordiz, Kiarash; Menon, Akanksha K.; Yee, Shannon K.

2017-09-01

Organic materials can be printed into thermoelectric (TE) devices for low temperature energy harvesting applications. The output voltage of printed devices is often limited by (i) small temperature differences across the active materials attributed to small leg lengths and (ii) the lower Seebeck coefficient of organic materials compared to their inorganic counterparts. To increase the voltage, a large number of p- and n-type leg pairs is required for organic TEs; this, however, results in an increased interconnect resistance, which then limits the device output power. In this work, we discuss practical concepts to address this problem by positioning TE legs in a hexagonal closed-packed layout. This helps achieve higher fill factors (˜91%) than conventional inorganic devices (˜25%), which ultimately results in higher voltages and power densities due to lower interconnect resistances. In addition, wiring the legs following a Hilbert spacing-filling pattern allows for facile load matching to each application. This is made possible by leveraging the fractal nature of the Hilbert interconnect pattern, which results in identical sub-modules. Using the Hilbert design, sub-modules can better accommodate non-uniform temperature distributions because they naturally self-localize. These device design concepts open new avenues for roll-to-roll printing and custom TE module shapes, thereby enabling organic TE modules for self-powered sensors and wearable electronic applications.

Nothing about Us without Us: Asking Kentuckians with Disabilities about What They Need to Thrive. Research Brief. Spring 2016

ERIC Educational Resources Information Center

Mevoli, K.; Tanner, A.; Adams, C.; Rhodes, A.; Warren, T.; Sherif, V.

2016-01-01

As a part of their strategic long term planning process, the Commonwealth Council for Developmental Disabilities (CCDD), Kentucky Protection & Advocacy (KPA), and the Human Development Institute (HDI) at the University of Kentucky developed a survey to identify areas of high need for people with disabilities in the state. This research brief…

Subjective and Objective Evaluation of Pitch Extractors for LPC and Harmonic Deviations Vocoders.

DTIC Science & Technology

1984-07-01

Neman Inc. significance of the voicing errors at unvoiced-voiced transitions (see Section 7.2), is to penalize the early and the late start of...8217- Report No. 5726 Bolt Beranek and Neman Inc. Objective PAL Measure LPC/Cler =/Clear LPC/Noise HDY Noise S- Bes Measures: S EDFL-C-EF -0.990 -0.991 -0.995

Higher Education Academics' Satisfaction with Their Terms and Conditions of Service and Their Job Satisfaction: A Case Study

ERIC Educational Resources Information Center

Mammen, K. J.

2006-01-01

This article originates from a research conducted at a Historically Disadvantaged Institution (HDI) in South Africa. Academics (those who teach) at higher education institutions (HEIs) are usually highly qualified personnel. Their satisfaction with the terms and conditions of service and the job satisfaction they derive from and through their work…

Indonesian Perspective on Massive Open Online Courses: Opportunities and Challenges

ERIC Educational Resources Information Center

Berliyanto; Santoso, Harry B.

2018-01-01

There are two indications that Indonesia needs to improve its education quality. The first is the Human Development Index (HDI), which is still at the medium level, and the second is the enrollment rate in higher education, which is also at the low level. MOOCs have the potential to solve both problems. However, implementing MOOCs in a developing…

Patterns of Human Development Indicators across Constitutional Analysis of Children's Rights to Protection, Provision, and Participation

ERIC Educational Resources Information Center

Habashi, Janette; Wright, Lynne; Hathcoat, John D.

2012-01-01

This study examines children's images in constitutions and/or amendments as articulated in the Convention on the Rights of the Child while they intersect with the three dimensions of the Human Development Index (HDI) of 2008: life expectancy, educational index, and GDP. The connection between the images of the child and the fulfillment of the…

Employing the Components of the Human Development Index to Drive Resources to Educational Policies

ERIC Educational Resources Information Center

Sant'Anna, Annibal Parracho; de Araujo Ribeiro, Rodrigo Otavio; Dutt-Ross, Steven

2011-01-01

A new form of composition of the indicators employed to generate the United Nations Human Development Index (HDI) is presented here. This form of composition is based on the assumption that random errors affect the measurement of each indicator. This assumption allows for replacing the vector of evaluations according to each indicator by vectors…

Attracting Attention for the Cause. The Reporting of Three Indices in the UK National Press

ERIC Educational Resources Information Center

Morse, Stephen

2011-01-01

Indicators and indices (a collection of indicators into a single value) have been promoted for some time as convenient devices for the presentation of complex datasets to a more general audience. Examples of indices are the corruption perception index (CPI), human development index (HDI) and ecological footprint (EF). The research reported in this…

Another Approach to Measuring Human Development: The Composite Dynamic Human Development Index

ERIC Educational Resources Information Center

Bilbao-Ubillos, Javier

2013-01-01

This paper seeks mainly to contribute to the debate on how the relative degree of development of a country should be measured by proposing an indicator to build on the valuable starting point provided by the Human Development Index (HDI). The indicator proposed is called the "Composite, Dynamic Human Development Index". It incorporates in a simple…

Effects on well-being of investing in cleaner air in India.

PubMed

Sanderson, Warren; Striessnig, Erich; Schöpp, Wolfgang; Amann, Markus

2013-01-01

Over the past decade, India has experienced rapid economic growth along with increases in levels of air pollution. Our goal is to examine how alternative policies for air pollution abatement affect well-being there. In particular, we estimate the effects of policies to reduce the levels of ambient fine particulates (PM2.5), which are especially harmful to human health, on well-being, quantified using the United Nations' human development index (HDI). Two of the three dimensions of this index are based on gross domestic product (GDP) per capita and life expectancy. Our approach allows reductions in PM2.5 to affect both of them. In particular, economic growth is affected negatively through the costs of the additional pollution control measures and positively through the increased productivity of the population. We consider three scenarios of PM2.5 abatement, corresponding to no further control, current Indian legislation, and current European legislation. The overall effect in both control scenarios is that growth in GDP is virtually unaffected relative to the case of no further controls, life expectancy is higher, and well-being, as measured by the HDI, is improved. In India, air pollution abatement investments clearly improve well-being.

N-halamine-based rechargeable antimicrobial and biofilm-controlling polyurethane

PubMed Central

Sun, Xinbo; Cao, Zhengbing; Porteous, Nuala; Sun, Yuyu

2012-01-01

An N-halamine precursor, 5, 5-dimethyl hydantoin (DMH), was covalently linked to the surface of polyurethane (PU) with 1,6-hexamethylene diisocyanate (HDI) as a coupling agent. The reaction pathways were investigated using propyl isocyanate (PI) as a model compound, and the results suggested that the imide and amide groups of DMH had very similar reactivity toward the isocyanate groups on PU surfaces activated with HDI. After bleach treatment, the covalently bound DMH moieties were transformed into N-halamines. The new N-halmaine-based PU provided potent antimicrobial effects against Staphylococcus aureus (S. aureus, Gram-positive), Escherichia coli (E. coli, Gram-negative), methicillin-resistant staphylococcus aureus (MRSA, drug resistant Gram-positive bacteria), vancomycin-resistant enterococcus (VRE, drug resistant Gram-positive bacteria), and Candida albicans (C. ablicans, fungi), and successfully prevented bacterial and fungal biofilm formation. The antimicrobial and biofilm-controlling effects were stable for longer than 6 months under normal storage in open air. Furthermore, if the functions were lost due to prolonged use, they could be recharged by another chlorination treatment. The recharging could be repeated as needed to achieve long-term protection against microbial contamination and biofilm-formation. PMID:22244984

Gelatin-Modified Polyurethanes for Soft Tissue Scaffold

PubMed Central

Kucińska-Lipka, Justyna; Janik, Helena

2013-01-01

Recently, in the field of biomaterials for soft tissue scaffolds, the interest of their modification with natural polymersis growing. Synthetic polymers are often tough, and many of them do not possess fine biocompatibility. On the other hand, natural polymers are biocompatible but weak when used alone. The combination of natural and synthetic polymers gives the suitable properties for tissue engineering requirements. In our study, we modified gelatin synthetic polyurethanes prepared from polyester poly(ethylene-butylene adipate) (PEBA), aliphatic 1,6-hexamethylene diisocyanate (HDI), and two different chain extenders 1,4-butanediol (BDO) or 1-ethoxy-2-(2-hydroxyethoxy)ethanol (EHEE). From a chemical point of view, we replaced expensive components for building PU, such as 2,6-diisocyanato methyl caproate (LDI) and 1,4-diisocyanatobutane (BDI), with cost-effective HDI. The gelatin was added in situ (in the first step of synthesis) to polyurethane to increase biocompatibility and biodegradability of the obtained material. It appeared that the obtained gelatin-modified PU foams, in which chain extender was BDO, had enhanced interactions with media and their hydrolytic degradation profile was also improved for tissue engineering application. Furthermore, the gelatin introduction had positive impact on gelatin-modified PU foams by increasing their hemocompatibility. PMID:24363617

Localized solar collectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghasemi, Hadi; Marconnet, Amy Marie; Chen, Gang

A localized heating structure, and method of forming same, for use in solar systems includes a thermally insulating layer having interconnected pores, a density of less than about 3000 kg/m.sup.3, and a hydrophilic surface, and an expanded carbon structure adjacent to the thermally insulating layer. The expanded carbon structure has a porosity of greater than about 80% and a hydrophilic surface.

3D interconnect metrology in CMS/ITRI

NASA Astrophysics Data System (ADS)

Ku, Y. S.; Shyu, D. M.; Hsu, W. T.; Chang, P. Y.; Chen, Y. C.; Pang, H. L.

2011-05-01

Semiconductor device packaging technology is rapidly advancing, in response to the demand for thinner and smaller electronic devices. Three-dimensional chip/wafer stacking that uses through-silicon vias (TSV) is a key technical focus area, and the continuous development of this novel technology has created a need for non-contact characterization. Many of these challenges are novel to the industry due to the relatively large variety of via sizes and density, and new processes such as wafer thinning and stacked wafer bonding. This paper summarizes the developing metrology that has been used during via-middle & via-last TSV process development at EOL/ITRI. While there is a variety of metrology and inspection applications for 3D interconnect processing, the main topics covered here are via CD/depth measurement, thinned wafer inspection and wafer warpage measurement.

RARE PROJECT: QUANTIFYING THE IMPACT OF AN AUTOBODY SHOP COMPLIANCE ASSISTANCE PROGRAM IN LAWRENCE, MA ON SHOP EMISSIONS AND RESIDENTIAL EXPOSURES TO HDI AND OTHER ISOCYANTES

EPA Science Inventory

This is an ORD Regional Applied Research Effort (RARE) study with EPA Region 1. For the past several years Region 1 has been managing an EPA grant for an auto body shop compliance assistance project in Lawrence, MA to address residents' concerns about auto body shops as a source...

Mortality of emergency abdominal surgery in high-, middle- and low-income countries.

PubMed

2016-07-01

Surgical mortality data are collected routinely in high-income countries, yet virtually no low- or middle-income countries have outcome surveillance in place. The aim was prospectively to collect worldwide mortality data following emergency abdominal surgery, comparing findings across countries with a low, middle or high Human Development Index (HDI). This was a prospective, multicentre, cohort study. Self-selected hospitals performing emergency surgery submitted prespecified data for consecutive patients from at least one 2-week interval during July to December 2014. Postoperative mortality was analysed by hierarchical multivariable logistic regression. Data were obtained for 10 745 patients from 357 centres in 58 countries; 6538 were from high-, 2889 from middle- and 1318 from low-HDI settings. The overall mortality rate was 1·6 per cent at 24 h (high 1·1 per cent, middle 1·9 per cent, low 3·4 per cent; P < 0·001), increasing to 5·4 per cent by 30 days (high 4·5 per cent, middle 6·0 per cent, low 8·6 per cent; P < 0·001). Of the 578 patients who died, 404 (69·9 per cent) did so between 24 h and 30 days following surgery (high 74·2 per cent, middle 68·8 per cent, low 60·5 per cent). After adjustment, 30-day mortality remained higher in middle-income (odds ratio (OR) 2·78, 95 per cent c.i. 1·84 to 4·20) and low-income (OR 2·97, 1·84 to 4·81) countries. Surgical safety checklist use was less frequent in low- and middle-income countries, but when used was associated with reduced mortality at 30 days. Mortality is three times higher in low- compared with high-HDI countries even when adjusted for prognostic factors. Patient safety factors may have an important role. NCT02179112 (http://www.clinicaltrials.gov). © 2016 BJS Society Ltd Published by John Wiley & Sons Ltd.

Social Context and Dental Pain in Adults of Colombian Ethnic Minority Groups: A Multilevel Cross-Sectional Study.

PubMed

Ardila, Carlos M; Agudelo-Suárez, Andrés A

2016-01-01

To estimate the effect of social context on dental pain in adults of Colombian ethnic minority groups (CEGs). Information from 34,843 participants was used. A multilevel model was constructed that had ethnic groups (ie, CEGs and non-CEGs) at level 1 and Colombian states at level 2. Contextual variables included gross domestic product (GDP), Human Development Index (HDI), and Unmet Basic Needs Index (UBNI). Dental pain was observed in 12.3% of 6,440 CEGs. In an unadjusted logistic regression model, dental pain was associated with being a CEG (odds ratio [95% confidence interval], 1.34 [1.22-1.46]; P = .0001). This association remained significant after adjusting for possible confounding variables. An unconditional multilevel analysis showed that the variance in dental pain was statistically significant at the ethnic group level (β = 0.047 ± 0.015; P = .0009) and at the state level (β = 0.038 ± 0.019; P = .02) and that the variation between ethnic groups was higher than the variation between states (55% vs 45%, respectively). In a multivariate model, the variance in dental pain was also statistically significant at the ethnic group level (β = 0.029 ± 0.012; P = .007) and the state level (β = 0.042 ± .019; P = .01), but the variation between states was higher (40% vs 60%). The results of multilevel multivariate analyses showed that dental pain was associated with increasing age (β = 0.009 ± 0.001; P = .0001), lower education level (β = 0.302 ± 0.103; P = .0001), female sex (β = 0.031 ± 0.069; P = .003), GDP (β = 5.136 ± 2.009; P = .002) and HDI (β = 6.862 ± 5.550; P = .004); however, UBNI was not associated with dental pain. The variance in dental pain was higher between states than between ethnic groups in the multivariate multilevel model. Dental pain in CEGs was associated with contextual and individual factors. Considering contextual factors, GDP and HDI may play a major role in dental pain prevalence.

Identifying biomarkers of dietary patterns by using metabolomics123

PubMed Central

Derkach, Andriy; Reedy, Jill; Subar, Amy F; Sampson, Joshua N; Albanes, Demetrius; Gu, Fangyi; Kontto, Jukka; Lassale, Camille; Liao, Linda M; Männistö, Satu; Mondul, Alison M; Weinstein, Stephanie J; Irwin, Melinda L; Mayne, Susan T; Stolzenberg-Solomon, Rachael

2017-01-01

Background: Healthy dietary patterns that conform to national dietary guidelines are related to lower chronic disease incidence and longer life span. However, the precise mechanisms involved are unclear. Identifying biomarkers of dietary patterns may provide tools to validate diet quality measurement and determine underlying metabolic pathways influenced by diet quality. Objective: The objective of this study was to examine the correlation of 4 diet quality indexes [the Healthy Eating Index (HEI) 2010, the Alternate Mediterranean Diet Score (aMED), the WHO Healthy Diet Indicator (HDI), and the Baltic Sea Diet (BSD)] with serum metabolites. Design: We evaluated dietary patterns and metabolites in male Finnish smokers (n = 1336) from 5 nested case-control studies within the Alpha-Tocopherol, Beta-Carotene Cancer Prevention Study cohort. Participants completed a validated food-frequency questionnaire and provided a fasting serum sample before study randomization (1985–1988). Metabolites were measured with the use of mass spectrometry. We analyzed cross-sectional partial correlations of 1316 metabolites with 4 diet quality indexes, adjusting for age, body mass index, smoking, energy intake, education, and physical activity. We pooled estimates across studies with the use of fixed-effects meta-analysis with Bonferroni correction for multiple comparisons, and conducted metabolic pathway analyses. Results: The HEI-2010, aMED, HDI, and BSD were associated with 23, 46, 23, and 33 metabolites, respectively (17, 21, 11, and 10 metabolites, respectively, were chemically identified; r-range: −0.30 to 0.20; P = 6 × 10−15 to 8 × 10−6). Food-based diet indexes (HEI-2010, aMED, and BSD) were associated with metabolites correlated with most components used to score adherence (e.g., fruit, vegetables, whole grains, fish, and unsaturated fat). HDI correlated with metabolites related to polyunsaturated fat and fiber components, but not other macro- or micronutrients (e.g., percentages of protein and cholesterol). The lysolipid and food and plant xenobiotic pathways were most strongly associated with diet quality. Conclusions: Diet quality, measured by healthy diet indexes, is associated with serum metabolites, with the specific metabolite profile of each diet index related to the diet components used to score adherence. This trial was registered at clinicaltrials.gov as NCT00342992. PMID:28031192

Three-dimensional and thermal surface imaging produces reliable measures of joint shape and temperature: a potential tool for quantifying arthritis

PubMed Central

Spalding, Steven J; Kwoh, C Kent; Boudreau, Robert; Enama, Joseph; Lunich, Julie; Huber, Daniel; Denes, Louis; Hirsch, Raphael

2008-01-01

Introduction The assessment of joints with active arthritis is a core component of widely used outcome measures. However, substantial variability exists within and across examiners in assessment of these active joint counts. Swelling and temperature changes, two qualities estimated during active joint counts, are amenable to quantification using noncontact digital imaging technologies. We sought to explore the ability of three dimensional (3D) and thermal imaging to reliably measure joint shape and temperature. Methods A Minolta 910 Vivid non-contact 3D laser scanner and a Meditherm med2000 Pro Infrared camera were used to create digital representations of wrist and metacarpalphalangeal (MCP) joints. Specialized software generated 3 quantitative measures for each joint region: 1) Volume; 2) Surface Distribution Index (SDI), a marker of joint shape representing the standard deviation of vertical distances from points on the skin surface to a fixed reference plane; 3) Heat Distribution Index (HDI), representing the standard error of temperatures. Seven wrists and 6 MCP regions from 5 subjects with arthritis were used to develop and validate 3D image acquisition and processing techniques. HDI values from 18 wrist and 9 MCP regions were obtained from 17 patients with active arthritis and compared to data from 10 wrist and MCP regions from 5 controls. Standard deviation (SD), coefficient of variation (CV), and intraclass correlation coefficients (ICC) were calculated for each quantitative measure to establish their reliability. CVs for volume and SDI were <1.3% and ICCs were greater than 0.99. Results Thermal measures were less reliable than 3D measures. However, significant differences were observed between control and arthritis HDI values. Two case studies of arthritic joints demonstrated quantifiable changes in swelling and temperature corresponding with changes in symptoms and physical exam findings. Conclusion 3D and thermal imaging provide reliable measures of joint volume, shape, and thermal patterns. Further refinement may lead to the use of these technologies to improve the assessment of disease activity in arthritis. PMID:18215307

Dominance and leadership in research activities: Collaboration between countries of differing human development is reflected through authorship order and designation as corresponding authors in scientific publications

PubMed Central

Park, Jinseo; Huamaní, Charles; Ramos, José M.

2017-01-01

Introduction Scientific collaboration is an important mechanism that enables the integration of the least developed countries into research activities. In the present study, we use the order of author signatures and addresses for correspondence in scientific publications as variables to analyze the interactions between countries of very high (VHHD), high (HHD), medium (MHD), and low human development (LHD). Methodology We identified all documents published between 2011 and 2015 in journals included in the Science Citation Index-Expanded categories’ of Tropical Medicine, Infectious Diseases, Parasitology, and Pediatrics. We then classified the countries participating in the publications according to their Human Development Index (HDI), analyzing the international collaboration; positioning and influence of some countries over others in cooperative networks; their leadership; and the impact of the work based on the HDI and the type of collaboration. Results We observed a high degree of international collaboration in all the areas analyzed, in the case of both LHD and MHD countries. We identified numerous cooperative links between VHHD countries and MHD/LHD countries, reflecting the fact that cooperative links are an important mechanism for integrating research activities into the latter. The countries with large emerging economies, such as Brazil and China stand out due to the dominance they exert in the collaborations established with the United States, the UK, and other European countries. The analysis of the leadership role of the countries, measured by the frequency of lead authorships, shows limited participation by MHD/LHD countries. This reduced participation among less developed countries is further accentuated by their limited presence in the addresses for correspondence. We observed significant statistical differences in the degree of citation according to the HDI of the participating countries. Conclusions The order of signatures and the address for correspondence in scientific publications are bibliographic characteristics that facilitate a precise, in-depth analysis of cooperative practices and their associations with concepts like dominance or leadership. This is useful to monitor the existing balance in research participation in health research publications. PMID:28792519

High-density stretchable microelectrode arrays: An integrated technology platform for neural and muscular surface interfacing

NASA Astrophysics Data System (ADS)

Guo, Liang

2011-12-01

Numerous applications in neuroscience research and neural prosthetics, such as retinal prostheses, spinal-cord surface stimulation for prosthetics, electrocorticogram (ECoG) recording for epilepsy detection, etc., involve electrical interaction with soft excitable tissues using a surface stimulation and/or recording approach. These applications require an interface that is able to set up electrical communications with a high throughput between electronics and the excitable tissue and that can dynamically conform to the shape of the soft tissue. Being a compliant and biocompatible material with mechanical impedance close to that of soft tissues, polydimethylsiloxane (PDMS) offers excellent potential as the substrate material for such neural interfaces. However, fabrication of electrical functionalities on PDMS has long been very challenging. This thesis work has successfully overcome many challenges associated with PDMS-based microfabrication and achieved an integrated technology platform for PDMS-based stretchable microelectrode arrays (sMEAs). This platform features a set of technological advances: (1) we have fabricated uniform current density profile microelectrodes as small as 10 mum in diameter; (2) we have patterned high-resolution (feature as small as 10 mum), high-density (pitch as small as 20 mum) thin-film gold interconnects on PDMS substrate; (3) we have developed a multilayer wiring interconnect technology within the PDMS substrate to further boost the achievable integration density of such sMEA; and (4) we have invented a bonding technology---via-bonding---to facilitate high-resolution, high-density integration of the sMEA with integrated circuits (ICs) to form a compact implant. Taken together, this platform provides a high-resolution, high-density integrated system solution for neural and muscular surface interfacing. sMEAs of example designs are evaluated through in vitro and in vivo experimentations on their biocompatibility, surface conformability, and surface recording/stimulation capabilities, with a focus on epimysial (i.e. on the surface of muscle) applications. Finally, as an example medical application, we investigate a prosthesis for unilateral vocal cord paralysis (UVCP) based on simultaneous multichannel epimysial recording and stimulation.

High bit rate mass data storage device

NASA Technical Reports Server (NTRS)

1973-01-01

The HDDR-II mass data storage system consists of a Leach MTR 7114 recorder reproducer, a wire wrapped, integrated circuit flat plane and necessary power supplies for the flat plane. These units, with interconnecting cables and control panel are enclosed in a common housing mounted on casters. The electronics used in the HDDR-II double density decoding and encoding techniques are described.

High-performance, lattice-mismatched InGaAs/InP monolithic interconnected modules (MIMs)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fatemi, Navid S.; Wilt, David M.; Hoffman, Richard W., Jr.

1998-10-01

High performance, lattice-mismatched p/n InGaAs/lnP monolithic interconnected module (MIM) structures were developed for thermophotovoltaic (TPV) applications. A MIM device consists of several individual InGaAs photovoltaic (PV) cells series-connected on a single semi-insulating (S.I.) InP substrate. Both interdigitated and conventional (i.e., non-interdigitated) MIMs were fabricated. The energy bandgap (Eg) for these devices was 0.60 eV. A compositionally step-graded InPAs buffer was used to accommodate a lattice mismatch of 1.1% between the active InGaAs cell structure and the InP substrate. 1x1-cm, 15-cell, 0.60-eV MIMs demonstrated an open-circuit voltage (Voc) of 5.2 V (347 mV per cell) and a fill factor of 68.6%more » at a short-circuit current density (Jsc) of 2.0 A/cm{sup 2}, under flashlamp testing. The reverse saturation current density (Jo) was 1.6x10{sup {minus}6} A/cm{sup 2}. Jo values as low as 4.1x10{sup {minus}7} A/cm{sup 2} were also observed with a conventional planar cell geometry.« less

A new method for the production of social fragility functions and the result of its use in worldwide fatality loss estimation for earthquakes

NASA Astrophysics Data System (ADS)

Daniell, James; Wenzel, Friedemann

2014-05-01

A review of over 200 fatality models over the past 50 years for earthquake loss estimation from various authors has identified key parameters that influence fatality estimation in each of these models. These are often very specific and cannot be readily adapted globally. In the doctoral dissertation of the author, a new method is used for regression of fatalities to intensity using loss functions based not only on fatalities, but also using population models and other socioeconomic parameters created through time for every country worldwide for the period 1900-2013. A calibration of functions was undertaken from 1900-2008, and each individual quake analysed from 2009-2013 in real-time, in conjunction with www.earthquake-report.com. Using the CATDAT Damaging Earthquakes Database containing socioeconomic loss information for 7208 damaging earthquake events from 1900-2013 including disaggregation of secondary effects, fatality estimates for over 2035 events have been re-examined from 1900-2013. In addition, 99 of these events have detailed data for the individual cities and towns or have been reconstructed to create a death rate as a percentage of population. Many historical isoseismal maps and macroseismic intensity datapoint surveys collected globally, have been digitised and modelled covering around 1353 of these 2035 fatal events, to include an estimate of population, occupancy and socioeconomic climate at the time of the event at each intensity bracket. In addition, 1651 events without fatalities but causing damage have also been examined in this way. The production of socioeconomic and engineering indices such as HDI and building vulnerability has been undertaken on a country-level and state/province-level leading to a dataset allowing regressions not only using a static view of risk, but also allowing for the change in the socioeconomic climate between the earthquake events to be undertaken. This means that a year 1920 event in a country, will not simply be regressed against a year 2000 event, but normalised. A global human development index (HDI) (life expectancy, education and income) was developed and collected for the first time from 1900-2013 globally on a country and province level allowing for a very useful parameter in the regression. In addition, the occupancy rate from the time of day that the event occurred, as well as population density and individual earthquake attributes like the existence of a foreshock were also examined for the 3004 events in the regression analysis. Where an event has not occurred in a country previously, a regionalisation strategy based on building typologies, seismic code index, building practice, climate, earthquake history and socioeconomic climate is proposed. The result is a set of "social fragility functions" calculating fatalities for use in any country worldwide using the parameters of macroseismic intensity, population, HDI, time of day and occupancy, that provide a robust accurate method, which has not only been calibrated to country level data but to town and city data through time. The estimates will continue to be used in conjunction with Earthquake Report, a non-profit worldwide earthquake reporting website and has shown very promising results from 2010-2013 for rapid estimates of fatalities globally.

Surfactant-Free Aqueous Synthesis of Pure Single-Crystalline SnSe Nanosheet Clusters as Anode for High Energy- and Power-Density Sodium-Ion Batteries.

PubMed

Yuan, Shuang; Zhu, Yun-Hai; Li, Wang; Wang, Sai; Xu, Dan; Li, Lin; Zhang, Yu; Zhang, Xin-Bo

2017-01-01

SnSe with 3D hierarchical nanostructure composed of interconnected single-crystal SnSe nanosheets is synthesized via a fast and effective strategy. Unexpectedly, when used as the anode material for Na-ion batteries (NIBs), the SnSe exhibits a high capacity (738 mA h g -1 ), superior rate capability (40 A g -1 ), and high energy density in a full cell. These results provide the possibility of SnSe use as NIBs anodes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design, fabrication, and characterization of high density silicon photonic components

NASA Astrophysics Data System (ADS)

Jones, Adam Michael

Our burgeoning appetite for data relentlessly demands exponential scaling of computing and communications resources leading to an overbearing and ever-present drive to improve eciency while reducing on-chip area even as photonic components expand to ll application spaces no longer satised by their electronic counterparts. With a high index contrast, low optical loss, and compatibility with the CMOS fabrication infrastructure, silicon-on-insulator technology delivers a mechanism by which ecient, sub-micron waveguides can be fabricated while enabling monolithic integration of photonic components and their associated electronic infrastructure. The result is a solution leveraging the superior bandwidth of optical signaling on a platform capable of delivering the optical analogue to Moore's Law scaling of transistor density. Device size is expected to end Moore's Law scaling in photonics as Maxwell's equations limit the extent to which this parameter may be reduced. The focus of the work presented here surrounds photonic device miniaturization and the development of 3D optical interconnects as approaches to optimize performance in densely integrated optical interconnects. In this dissertation, several technological barriers inhibiting widespread adoption of photonics in data communications and telecommunications are explored. First, examination of loss and crosstalk performance in silicon nitride over SOI waveguide crossings yields insight into the feasibility of 3D optical interconnects with the rst experimental analysis of such a structure presented herein. A novel measurement platform utilizing a modied racetrack resonator is then presented enabling extraction of insertion loss data for highly ecient structures while requiring minimal on-chip area. Finally, pioneering work in understanding the statistical nature of doublet formation in microphotonic resonators is delivered with the resulting impact on resonant device design detailed.

Design Fabrication and Characterization of High Density Silicon Photonic Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Adam

2015-02-01

Our burgeoning appetite for data relentlessly demands exponential scaling of computing and communications resources leading to an overbearing and ever-present drive to improve e ciency while reducing on-chip area even as photonic components expand to ll application spaces no longer satis ed by their electronic counterparts. With a high index contrast, low optical loss, and compatibility with the CMOS fabrication infrastructure, silicon-on-insulator technology delivers a mechanism by which e cient, sub-micron waveguides can be fabricated while enabling monolithic integration of photonic components and their associated electronic infrastructure. The result is a solution leveraging the superior bandwidth of optical signaling onmore » a platform capable of delivering the optical analogue to Moore's Law scaling of transistor density. Device size is expected to end Moore's Law scaling in photonics as Maxwell's equations limit the extent to which this parameter may be reduced. The focus of the work presented here surrounds photonic device miniaturization and the development of 3D optical interconnects as approaches to optimize performance in densely integrated optical interconnects. In this dissertation, several technological barriers inhibiting widespread adoption of photonics in data communications and telecommunications are explored. First, examination of loss and crosstalk performance in silicon nitride over SOI waveguide crossings yields insight into the feasibility of 3D optical interconnects with the rst experimental analysis of such a structure presented herein. A novel measurement platform utilizing a modi ed racetrack resonator is then presented enabling extraction of insertion loss data for highly e cient structures while requiring minimal on-chip area. Finally, pioneering work in understanding the statistical nature of doublet formation in microphotonic resonators is delivered with the resulting impact on resonant device design detailed.« less

High-speed Si/GeSi hetero-structure Electro Absorption Modulator.

PubMed

Mastronardi, L; Banakar, M; Khokhar, A Z; Hattasan, N; Rutirawut, T; Bucio, T Domínguez; Grabska, K M; Littlejohns, C; Bazin, A; Mashanovich, G; Gardes, F Y

2018-03-19

The ever-increasing demand for integrated, low power interconnect systems is pushing the bandwidth density of CMOS photonic devices. Taking advantage of the strong Franz-Keldysh effect in the C and L communication bands, electro-absorption modulators in Ge and GeSi are setting a new standard in terms of device footprint and power consumption for next generation photonics interconnect arrays. In this paper, we present a compact, low power electro-absorption modulator (EAM) Si/GeSi hetero-structure based on an 800 nm SOI overlayer with a modulation bandwidth of 56 GHz. The device design and fabrication tolerant process are presented, followed by the measurement analysis. Eye diagram measurements show a dynamic ER of 5.2 dB at a data rate of 56 Gb/s at 1566 nm, and calculated modulator power is 44 fJ/bit.

Channeling of electron transport to improve collection efficiency in mesoporous titanium dioxide dye sensitized solar cell stacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fakharuddin, Azhar; Ahmed, Irfan; Yusoff, Mashitah M.

2014-02-03

Dye-sensitized solar cell (DSC) modules are generally made by interconnecting large photoelectrode strips with optimized thickness (∼14 μm) and show lower current density (J{sub SC}) compared with their single cells. We found out that the key to achieving higher J{sub SC} in large area devices is optimized photoelectrode volume (V{sub D}), viz., thickness and area which facilitate the electron channeling towards working electrode. By imposing constraints on electronic path in a DSC stack, we achieved >50% increased J{sub SC} and ∼60% increment in photoelectric conversion efficiency in photoelectrodes of similar V{sub D} (∼3.36 × 10{sup −4} cm{sup 3}) without using any metallic gridmore » or a special interconnections.« less

Is Mauritius Ready to Become the HRD Leader in Africa? An Assessment of Strategic Human Resource Development in Mauritius

ERIC Educational Resources Information Center

Dusoye, Indravidoushi C.; Oogarah, Kavi

2016-01-01

Purpose: This paper aims to explore the applicability of Strategic HRD in Mauritius. Additionally, it assesses if Mauritius, with a high HDI factor, can take the lead on Strategic HRD in Africa. Design/methodology/approach: This paper used a mixed-approach questionnaire. A sample of 21 managers was contacted and received a response rate of 67 per…

The Republic of the Philippines: Background and U.S. Relations

DTIC Science & Technology

2007-08-10

cost of living. 21 The HDI ranks countries according to human development indicators of life expectancy, education, literacy, and gross domestic...sovereignty over Mischief Reef, which is one of approximately 100 reefs and islands disputed by five Southeast Asian countries . A Visiting Forces...Order Code RL33233 The Republic of the Philippines: Background and U.S. Relations Updated August 10, 2007 Thomas Lum Specialist in Asian Affairs

Rebuilding Iraq - The Danish Interagency Strategy

DTIC Science & Technology

2007-02-09

HDI ), Iraq dropped from position number 76 in 1990, to position 126 in 2000. No other country underwent a similar descent in the same period. In the...and mutually impressionable main tendencies in Iraq today: progress in the political process, endeavors to rebuild the country , and a continued...the country , and (3) a continued serious security situation including violent incidents especially in the central part of Iraq but also in other

Synthesis and characterization of shape-memory poly carbonate urethane microspheres for future vascular embolization.

PubMed

Liu, Rongrong; Dai, Honglian; Zhou, Qian; Zhang, Qian; Zhang, Ping

2016-08-01

Two types of shape memory poly carbonate urethanes (PCUs) microspheres were synthesized by pre-polymerization and suspension polymerization, based on Polycarbonate diol (PCDL) as the soft segment, Isophorone diisocyanate (IPDI) and 1,6-hexamethylene diisocyanate (HDI) as the hard segments and 1,4-butanediol (BDO) as the chain expanding agent. The structure, crystallinity, and thermal property of the two synthesized PCUs were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Differential scanning calorimetery (DSC), respectively. The results showed that the two types of PCUs exhibited high thermal stability with phase separation and semi-crystallinity. Also, the results of the compression test displayed that the shape fixity and the shape recovery of two PCUs were more than 90% compared to the originals, indicating their similar bio-applicability and shape-memory properties. The tensile strength, elongation at break was enhanced by introducing and increasing content of HDI. The water contact angles of PCUs decreased and their surface tension increased by surface modified with Bovine serum albumin (BSA). Furthermore, the biological study results of two types of PCUs from the platelet adhesion test and the cell proliferation inhibition test indicated they had some biocompatibilites. Hence, the PCU microspheres might represent a smart and shape-memory embolic agent for vascular embolization.

Worldwide burden of gastric cancer in 2010 attributable to high sodium intake in 1990 and predicted attributable burden for 2030 based on exposures in 2010.

PubMed

Peleteiro, Bárbara; Barros, Susana; Castro, Clara; Ferro, Ana; Morais, Samantha; Lunet, Nuno

2016-08-01

Assessing the impact that patterns of Na intake may have on gastric cancer will provide a more comprehensive estimation of Na reduction as a primary prevention approach. We aimed to estimate the proportion of gastric cancer cases that are attributable to Na intake above the recommendation by the WHO (≤2 g/d) throughout the world in 2010, as well as expected values for 2030. Population attributable fractions (PAF) were computed for 187 countries, using Na intakes in 1990 and 2010 and estimates of the association between Na intake and gastric cancer, assuming a time lag of 20 years. Median PAF ranged from 10·1% in low to 22·5 % in very high Human Development Index (HDI) countries in men (P<0·001) and from 7·2 to 16·6 %, respectively, among women (P<0·001). An increase in median PAF until 2030 is expected in most settings, except for countries classified as low HDI, in both sexes. High Na intakes account for a large proportion of gastric cancer cases, and proportions are expected to increase in almost all of the countries. Intensified efforts to diminish Na intake in virtually all populations are needed to further reduce gastric cancer burden.

Modelling difficulties in abstract thinking in psychosis: the importance of socio-developmental background.

PubMed

Berg, A O; Melle, I; Zuber, V; Simonsen, C; Nerhus, M; Ueland, T; Andreassen, O A; Sundet, K; Vaskinn, A

2017-01-01

Abstract thinking is important in modern understanding of neurocognitive abilities, and a symptom of thought disorder in psychosis. In patients with psychosis, we assessed if socio-developmental background influences abstract thinking, and the association with executive functioning and clinical psychosis symptoms. Participants (n = 174) had a diagnosis of psychotic or bipolar disorder, were 17-65 years, intelligence quotient (IQ) > 70, fluent in a Scandinavian language, and their full primary education in Norway. Immigrants (N = 58) were matched (1:2) with participants without a history of migration (N = 116). All participants completed a neurocognitive and clinical assessment. Socio-developmental background was operationalised as human developmental index (HDI) of country of birth, at year of birth. Structural equation modelling was used to assess the model with best fit. The model with best fit, χ 2  = 96.591, df = 33, p < .001, confirmed a significant indirect effect of HDI scores on abstract thinking through executive functioning, but not through clinical psychosis symptoms. This study found that socio-developmental background influences abstract thinking in psychosis by indirect effect through executive functioning. We should take into account socio-developmental background in the interpretation of neurocognitive performance in patients with psychosis, and prioritise cognitive remediation in treatment of immigrant patients.

Hypervelocity Dust Injection for Plasma Diagnostic Applications

NASA Astrophysics Data System (ADS)

Ticos, Catalin

2005-10-01

Hypervelocity micron-size dust grain injection was proposed for high-temperature magnetized plasma diagnosis. Multiple dust grains are launched simultaneously into high temperature plasmas at several km/s or more. The hypervelocity dust grains are ablated by the electron and ion fluxes. Fast imaging of the resulting luminous plumes attached to each grain is expected to yield local magnetic field vectors. Combination of multiple local magnetic field vectors reproduces 2D or even 3D maps of the internal magnetic field topology. Key features of HDI are: (1) a high spatial resolution, due to a relatively small transverse size of the elongated tail, and (2) a small perturbation level, as the dust grains introduce negligible number of particles compared to the plasma particle inventory. The latter advantage, however, could be seriously compromised if the gas load from the accelerator has an unobstructed access to the diagnosed plasma. Construction of a HDI diagnostic for National Spherical Torus Experiment (NSTX), which includes a coaxial plasma gun for dust grain acceleration, is underway. Hydrogen and deuterium gas discharges inside accelerator are created by a ˜ 1 mF capacitor bank pre-charged up to 10 kV. The diagnostic apparatus also comprises a dust dispenser for pre-loading the accelerator with dust grains, and an imaging system that has a high spatial and temporal resolution.

Surface inspection: Research and development

NASA Technical Reports Server (NTRS)

Batchelder, J. S.

1987-01-01

Surface inspection techniques are used for process learning, quality verification, and postmortem analysis in manufacturing for a spectrum of disciplines. First, trends in surface analysis are summarized for integrated circuits, high density interconnection boards, and magnetic disks, emphasizing on-line applications as opposed to off-line or development techniques. Then, a closer look is taken at microcontamination detection from both a patterned defect and a particulate inspection point of view.

Laser Direct Routing for High Density Interconnects

NASA Astrophysics Data System (ADS)

Moreno, Wilfrido Alejandro

The laser restructuring of electronic circuits fabricated using standard Very Large Scale Integration (VLSI) process techniques, is an excellent alternative that allows low-cost quick turnaround production with full circuit similarity between the Laser Restructured prototype and the customized product for mass production. Laser Restructurable VLSI (LRVLSI) would allow design engineers the capability to interconnect cells that implement generic logic functions and signal processing schemes to achieve a higher level of design complexity. LRVLSI of a particular circuit at the wafer or packaged chip level is accomplished using an integrated computer controlled laser system to create low electrical resistance links between conductors and to cut conductor lines. An infrastructure for rapid prototyping and quick turnaround using Laser Restructuring of VLSI circuits was developed to meet three main parallel objectives: to pursue research on novel interconnect technologies using LRVLSI, to develop the capability of operating in a quick turnaround mode, and to maintain standardization and compatibility with commercially available equipment for feasible technology transfer. The system is to possess a high degree of flexibility, high data quality, total controllability, full documentation, short downtime, a user-friendly operator interface, automation, historical record keeping, and error indication and logging. A specially designed chip "SLINKY" was used as the test vehicle for the complete characterization of the Laser Restructuring system. With the use of Design of Experiment techniques the Lateral Diffused Link (LDL), developed originally at MIT Lincoln Laboratories, was completely characterized and for the first time a set of optimum process parameters was obtained. With the designed infrastructure fully operational, the priority objective was the search for a substitute for the high resistance, high current leakage to substrate, and relatively low density Lateral Diffused Link. A high density Laser Vertical Link with resistance values below 10 ohms was developed, studied and tested using design of experiment methodologies. The vertical link offers excellent advantages in the area of quick prototyping of electronic circuits, but even more important, due to having similar characteristics to a foundry produced via, it gives quick transfer from the prototype system verification stage to the mass production stage.

Monolithically interconnected GaAs solar cells: A new interconnection technology for high voltage solar cell output

NASA Astrophysics Data System (ADS)

Dinetta, L. C.; Hannon, M. H.

1995-10-01

Photovoltaic linear concentrator arrays can benefit from high performance solar cell technologies being developed at AstroPower. Specifically, these are the integration of thin GaAs solar cell and epitaxial lateral overgrowth technologies with the application of monolithically interconnected solar cell (MISC) techniques. This MISC array has several advantages which make it ideal for space concentrator systems. These are high system voltage, reliable low cost monolithically formed interconnections, design flexibility, costs that are independent of array voltage, and low power loss from shorts, opens, and impact damage. This concentrator solar cell will incorporate the benefits of light trapping by growing the device active layers over a low-cost, simple, PECVD deposited silicon/silicon dioxide Bragg reflector. The high voltage-low current output results in minimal 12R losses while properly designing the device allows for minimal shading and resistance losses. It is possible to obtain open circuit voltages as high as 67 volts/cm of solar cell length with existing technology. The projected power density for the high performance device is 5 kW/m for an AMO efficiency of 26% at 1 5X. Concentrator solar cell arrays are necessary to meet the power requirements of specific mission platforms and can supply high voltage power for electric propulsion systems. It is anticipated that the high efficiency, GaAs monolithically interconnected linear concentrator solar cell array will enjoy widespread application for space based solar power needs. Additional applications include remote man-portable or ultra-light unmanned air vehicle (UAV) power supplies where high power per area, high radiation hardness and a high bus voltage or low bus current are important. The monolithic approach has a number of inherent advantages, including reduced cost per interconnect and increased reliability of array connections. There is also a high potential for a large number of consumer products. Dual-use applications can include battery chargers and remote power supplies for consumer electronics products such as portable telephones/beepers, portable radios, CD players, dashboard radar detectors, remote walkway lighting, etc.

Monolithically interconnected GaAs solar cells: A new interconnection technology for high voltage solar cell output

NASA Technical Reports Server (NTRS)

Dinetta, L. C.; Hannon, M. H.

1995-01-01

Photovoltaic linear concentrator arrays can benefit from high performance solar cell technologies being developed at AstroPower. Specifically, these are the integration of thin GaAs solar cell and epitaxial lateral overgrowth technologies with the application of monolithically interconnected solar cell (MISC) techniques. This MISC array has several advantages which make it ideal for space concentrator systems. These are high system voltage, reliable low cost monolithically formed interconnections, design flexibility, costs that are independent of array voltage, and low power loss from shorts, opens, and impact damage. This concentrator solar cell will incorporate the benefits of light trapping by growing the device active layers over a low-cost, simple, PECVD deposited silicon/silicon dioxide Bragg reflector. The high voltage-low current output results in minimal 12R losses while properly designing the device allows for minimal shading and resistance losses. It is possible to obtain open circuit voltages as high as 67 volts/cm of solar cell length with existing technology. The projected power density for the high performance device is 5 kW/m for an AMO efficiency of 26% at 1 5X. Concentrator solar cell arrays are necessary to meet the power requirements of specific mission platforms and can supply high voltage power for electric propulsion systems. It is anticipated that the high efficiency, GaAs monolithically interconnected linear concentrator solar cell array will enjoy widespread application for space based solar power needs. Additional applications include remote man-portable or ultra-light unmanned air vehicle (UAV) power supplies where high power per area, high radiation hardness and a high bus voltage or low bus current are important. The monolithic approach has a number of inherent advantages, including reduced cost per interconnect and increased reliability of array connections. There is also a high potential for a large number of consumer products. Dual-use applications can include battery chargers and remote power supplies for consumer electronics products such as portable telephones/beepers, portable radios, CD players, dashboard radar detectors, remote walkway lighting, etc.

Issues of nanoelectronics: a possible roadmap.

PubMed

Wang, Kang L

2002-01-01

In this review, we will discuss a possible roadmap in scaling a nanoelectronic device from today's CMOS technology to the ultimate limit when the device fails. In other words, at the limit, CMOS will have a severe short channel effect, significant power dissipation in its quiescent (standby) state, and problems related to other essential characteristics. Efforts to use structures such as the double gate, vertical surround gate, and SOI to improve the gate control have continually been made. Other types of structures using SiGe source/drain, asymmetric Schottky source/drain, and the like will be investigated as viable structures to achieve ultimate CMOS. In reaching its scaling limit, tunneling will be an issue for CMOS. The tunneling current through the gate oxide and between the source and drain will limit the device operation. When tunneling becomes significant, circuits may incorporate tunneling devices with CMOS to further increase the functionality per device count. We will discuss both the top-down and bottom-up approaches in attaining the nanometer scale and eventually the atomic scale. Self-assembly is used as a bottom-up approach. The state of the art is reviewed, and the challenges of the multiple-step processing in using the self-assembly approach are outlined. Another facet of the scaling trend is to decrease the number of electrons in devices, ultimately leading to single electrons. If the size of a single-electron device is scaled in such a way that the Coulomb self-energy is higher than the thermal energy (at room temperature), a single-electron device will be able to operate at room temperature. In principle, the speed of the device will be fast as long as the capacitance of the load is also scaled accordingly. The single-electron device will have a small drive current, and thus the load capacitance, including those of interconnects and fanouts, must be small to achieve a reasonable speed. However, because the increase in the density (and/or functionality) of integrated circuits is the principal driver, the wiring or interconnects will increase and become the bottleneck for the design of future high-density and high-functionality circuits, particularly for single-electron devices. Furthermore, the massive interconnects needed in the architecture used today will result in an increase in load capacitance. Thus for single-electron device circuits, it is critical to have minimal interconnect loads. And new types of architectures with minimal numbers of global interconnects will be needed. Cellular automata, which need only nearest-neighbor interconnects, are discussed as a plausible example. Other architectures such as neural networks are also possible. Examples of signal processing using cellular automata are discussed. Quantum computing and information processing are based on quantum mechanical descriptions of individual particles correlated among each other. A quantum bit or qubit is described as a linear superposition of the wave functions of a two-state system, for example, the spin of a particle. With the interaction of two qubits, they are connected in a "wireless fashion" using wave functions via quantum mechanical interaction, referred to as entanglement. The interconnection by the nonlocality of wave functions affords a massive parallel nature for computing or so-called quantum parallelism. We will describe the potential and solid-state implementations of quantum computing and information, using electron spin and/or nuclear spin in Si and Ge. Group IV elements have a long coherent time and other advantages. The example of using SiGe for g factor engineering will be described.

Supercapacitors: A Hierarchical Carbon Derived from Sponge-Templated Activation of Graphene Oxide for High-Performance Supercapacitor Electrodes (Adv. Mater. 26/2016).

PubMed

Xu, Jin; Tan, Ziqi; Zeng, Wencong; Chen, Guanxiong; Wu, Shuilin; Zhao, Yuan; Ni, Kun; Tao, Zhuchen; Ikram, Mujtaba; Ji, Hengxing; Zhu, Yanwu

2016-07-01

H. Ji, Y. Zhu, and co-workers demonstrate a 3D hierarchically porous carbon by introducing a polyurethane sponge to template graphene oxide into a 3D interconnected structure while KOH activation generates abundant micropores in its backbone. As described on page 5222, a supercapacitor assembled with this carbon material achieves a high energy density of 89 W h kg(-1) (64 W h L(-1) ) and outstanding power density due to its shortened ion transport distance in three dimensions. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

United Nations Assistance Mission in Afghanistan: Background and Policy Issues

DTIC Science & Technology

2009-12-14

mainly through U.N. agencies and NGOs. 6 In 2007, Afghanistan placed 174th out of 178 countries on global rankings of the Human Development Index ( HDI ...and other insurgents to reestablish control of some areas of the country have slowed the pace and extent of economic development and the expansion of...improvement throughout the country . The international recovery and reconstruction effort in Afghanistan is immense and complicated and, in coordination

Chip-to-chip interconnects based on 3D stacking of optoelectrical dies on Si

NASA Astrophysics Data System (ADS)

Duan, P.; Raz, O.; Smalbrugge, B. E.; Duis, J.; Dorren, H. J. S.

2012-01-01

We demonstrate a new approach to increase the optical interconnection bandwidth density by stacking the opto-electrical dies directly on the CMOS driver. The suggested implementation is aiming to provide a wafer scale process which will make the use of wire bonding redundant and will allow for impedance matched metallic wiring between the electronic driving circuit and its opto-electronic counter part. We suggest the use of a thick photoresist ramp between CMOS driver and opto-electrical dies surface as the bridge for supporting co-plannar waveguides (CPW) electrically plated with lithographic accuracy. In this way all three dimensions of the interconnecting metal layer, width, length and thickness can be completely controlled. In this 1st demonstration all processing is done on commercially available devices and products, and is compatible with CMOS processing technology. To test the applicability of CPW instead of wire bonds for interconnecting the CMOS circuit and opto-electronic chips, we have made test samples and tested their performance at speeds up to 10 Gbps. In this demonstration, a silicon substrate was used on which we evaporated gold co-planar waveguides (CPW) to mimic a wire on the driver. An optical link consisting of a VCSEL chip and a photodiode chip has been assembled and fully characterized using optical coupling into and out of a multimode fiber (MMF). A 10 Gb/s 27-1 NRZ PRBS signal transmitted from one chip to another chip was detected error free. A 4 dB receiver sensitivity penalty is measured for the integrated device compared to a commercial link.

Parallel scalability of Hartree-Fock calculations

NASA Astrophysics Data System (ADS)

Chow, Edmond; Liu, Xing; Smelyanskiy, Mikhail; Hammond, Jeff R.

2015-03-01

Quantum chemistry is increasingly performed using large cluster computers consisting of multiple interconnected nodes. For a fixed molecular problem, the efficiency of a calculation usually decreases as more nodes are used, due to the cost of communication between the nodes. This paper empirically investigates the parallel scalability of Hartree-Fock calculations. The construction of the Fock matrix and the density matrix calculation are analyzed separately. For the former, we use a parallelization of Fock matrix construction based on a static partitioning of work followed by a work stealing phase. For the latter, we use density matrix purification from the linear scaling methods literature, but without using sparsity. When using large numbers of nodes for moderately sized problems, density matrix computations are network-bandwidth bound, making purification methods potentially faster than eigendecomposition methods.

Enhanced copper micro/nano-particle mixed paste sintered at low temperature for 3D interconnects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Y. Y.; Anantha, P.; Tan, C. S., E-mail: tancs@ntu.edu.sg

2016-06-27

An enhanced copper paste, formulated by copper micro- and nano-particles mixture, is reported to prevent paste cracking and obtain an improved packing density. The particle mixture of two different sizes enables reduction in porosity of the micro-paste and resolves the cracking issue in the nano-paste. In-situ temperature and resistance measurements indicate that the mixed paste has a lower densification temperature. Electrical study also shows a ∼12× lower sheet resistance of 0.27 Ω/sq. In addition, scanning electron microscope image analysis confirms a ∼50% lower porosity, which is consistent with the thermal and electrical results. The 3:1 (micro:nano, wt. %) mixed pastemore » is found to have the strongest synergistic effect. This phenomenon is discussed further. Consequently, the mixed paste is a promising material for potential low temperature 3D interconnects fabrication.« less

Development and production integration of a planarized AlCu interconnect process for submicron CMOS

NASA Astrophysics Data System (ADS)

Brown, Kevin C.; Hill, Rodney; Reddy, Krishna; Gadepally, Kamesh

1995-09-01

A planarized aluminum alloy interconnect has been developed as an alternative to tungsten plugs for a 0.65 (mu) CMOS technology. Contact resistance can increase with either an inadequate RF sputter clean or titanium that is too thin to reduce the native oxide. Diffusion barrier results show that a minimum amount of titanium nitride, whether deposited conventionally or with collimation, is necessary for low junction leakage and good sort yield. Stacked contacts and vias are supported while via resistance and defect density are improved. Electrical bridging due to silicon residues from AlSiCu can be minimized with metal overetching, but not to the extent of AlCu. Sidewall pitting was observed to be due to galvanic corrosion from copper precipitate formation. Overall yield has been improved along with decreased wafer cost compared to conventional tungsten plug technology.

Interconnect-free parallel logic circuits in a single mechanical resonator

PubMed Central

Mahboob, I.; Flurin, E.; Nishiguchi, K.; Fujiwara, A.; Yamaguchi, H.

2011-01-01

In conventional computers, wiring between transistors is required to enable the execution of Boolean logic functions. This has resulted in processors in which billions of transistors are physically interconnected, which limits integration densities, gives rise to huge power consumption and restricts processing speeds. A method to eliminate wiring amongst transistors by condensing Boolean logic into a single active element is thus highly desirable. Here, we demonstrate a novel logic architecture using only a single electromechanical parametric resonator into which multiple channels of binary information are encoded as mechanical oscillations at different frequencies. The parametric resonator can mix these channels, resulting in new mechanical oscillation states that enable the construction of AND, OR and XOR logic gates as well as multibit logic circuits. Moreover, the mechanical logic gates and circuits can be executed simultaneously, giving rise to the prospect of a parallel logic processor in just a single mechanical resonator. PMID:21326230

Interconnect-free parallel logic circuits in a single mechanical resonator.

PubMed

Mahboob, I; Flurin, E; Nishiguchi, K; Fujiwara, A; Yamaguchi, H

2011-02-15

In conventional computers, wiring between transistors is required to enable the execution of Boolean logic functions. This has resulted in processors in which billions of transistors are physically interconnected, which limits integration densities, gives rise to huge power consumption and restricts processing speeds. A method to eliminate wiring amongst transistors by condensing Boolean logic into a single active element is thus highly desirable. Here, we demonstrate a novel logic architecture using only a single electromechanical parametric resonator into which multiple channels of binary information are encoded as mechanical oscillations at different frequencies. The parametric resonator can mix these channels, resulting in new mechanical oscillation states that enable the construction of AND, OR and XOR logic gates as well as multibit logic circuits. Moreover, the mechanical logic gates and circuits can be executed simultaneously, giving rise to the prospect of a parallel logic processor in just a single mechanical resonator.

High frequency sound propagation in a network of interconnecting streets

NASA Astrophysics Data System (ADS)

Hewett, D. P.

2012-12-01

We propose a new model for the propagation of acoustic energy from a time-harmonic point source through a network of interconnecting streets in the high frequency regime, in which the wavelength is small compared to typical macro-lengthscales such as street widths/lengths and building heights. Our model, which is based on geometrical acoustics (ray theory), represents the acoustic power flow from the source along any pathway through the network as the integral of a power density over the launch angle of a ray emanating from the source, and takes into account the key phenomena involved in the propagation, namely energy loss by wall absorption, energy redistribution at junctions, and, in 3D, energy loss to the atmosphere. The model predicts strongly anisotropic decay away from the source, with the power flow decaying exponentially in the number of junctions from the source, except along the axial directions of the network, where the decay is algebraic.

A fast low-power optical memory based on coupled micro-ring lasers

NASA Astrophysics Data System (ADS)

Hill, Martin T.; Dorren, Harmen J. S.; de Vries, Tjibbe; Leijtens, Xaveer J. M.; den Besten, Jan Hendrik; Smalbrugge, Barry; Oei, Yok-Siang; Binsma, Hans; Khoe, Giok-Djan; Smit, Meint K.

2004-11-01

The increasing speed of fibre-optic-based telecommunications has focused attention on high-speed optical processing of digital information. Complex optical processing requires a high-density, high-speed, low-power optical memory that can be integrated with planar semiconductor technology for buffering of decisions and telecommunication data. Recently, ring lasers with extremely small size and low operating power have been made, and we demonstrate here a memory element constructed by interconnecting these microscopic lasers. Our device occupies an area of 18 × 40µm2 on an InP/InGaAsP photonic integrated circuit, and switches within 20ps with 5.5fJ optical switching energy. Simulations show that the element has the potential for much smaller dimensions and switching times. Large numbers of such memory elements can be densely integrated and interconnected on a photonic integrated circuit: fast digital optical information processing systems employing large-scale integration should now be viable.

Template-directed fabrication of porous gas diffusion layer for magnesium air batteries

NASA Astrophysics Data System (ADS)

Xue, Yejian; Miao, He; Sun, Shanshan; Wang, Qin; Li, Shihua; Liu, Zhaoping

2015-11-01

The uniform micropore distribution in the gas diffusion layers (GDLs) of the air-breathing cathode is very important for the metal air batteries. In this work, the super-hydrophobic GDL with the interconnected regular pores is prepared by a facile silica template method, and then the electrochemical properties of the Mg air batteries containing these GDLs are investigated. The results indicate that the interconnected and uniform pore structure, the available water-breakout pressure and the high gas permeability coefficient of the GDL can be obtained by the application of 30% silica template. The maximum power density of the Mg air battery containing the GDL with 30% regular pores reaches 88.9 mW cm-2 which is about 1.2 times that containing the pristine GDL. Furthermore, the GDL with 30% regular pores exhibits the improved the long term hydrophobic stability.

Optoelectronic Technology Consortium: Precompetitive Consortium for Optoelectronic Interconnect Technology

DTIC Science & Technology

1992-09-01

demonstrating the producibility of optoelectronic components for high-density/high-data-rate processors and accelerating the insertion of this technology...technology development stage, OETC will advance the development of optical components, produce links for a multiboard processor testbed demonstration, and...components that are affordable, initially at <$100 per line, and reliable, with a li~e BER᝺-15 and MTTF >10 6 hours. Under the OETC program, Honeywell will

High-performance, lattice-mismatched InGaAs/InP monolithic interconnected modules (MIMs)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fatemi, Navid S.; Wilt, David M.; Hoffman, Richard W.

1999-03-01

High performance, lattice-mismatched p/n InGaAs/InP monolithic interconnected module (MIM) structures were developed for thermophotovoltaic (TPV) applications. A MIM device consists of several individual InGaAs photovoltaic (PV) cells series-connected on a single semi-insulating (S.I.) InP substrate. Both interdigitated and conventional (i.e., non-interdigitated) MIMs were fabricated. The energy bandgap (Eg) for these devices was 0.60 eV. A compositionally step-graded InPAs buffer was used to accommodate a lattice mismatch of 1.1{percent} between the active InGaAs cell structure and the InP substrate. 1{times}1-cm, 15-cell, 0.60-eV MIMs demonstrated an open-circuit voltage (Voc) of 5.2 V (347 mV per cell) and a fill factor of 68.6{percent}more » at a short-circuit current density (Jsc) of 2.0 A/cm{sup 2}, under flashlamp testing. The reverse saturation current density (Jo) was 1.6{times}10{sup {minus}6}&hthinsp;A/cm{sup 2}. Jo values as low as 4.1{times}10{sup {minus}7}&hthinsp;A/cm{sup 2} were also observed with a conventional planar cell geometry. {copyright} {ital 1999 American Institute of Physics.}« less

High-performance solid state supercapacitors assembling graphene interconnected networks in porous silicon electrode by electrochemical methods using 2,6-dihydroxynaphthalen.

PubMed

Romanitan, Cosmin; Varasteanu, Pericle; Mihalache, Iuliana; Culita, Daniela; Somacescu, Simona; Pascu, Razvan; Tanasa, Eugenia; Eremia, Sandra A V; Boldeiu, Adina; Simion, Monica; Radoi, Antonio; Kusko, Mihaela

2018-06-25

The challenge for conformal modification of the ultra-high internal surface of nanoporous silicon was tackled by electrochemical polymerisation of 2,6-dihydroxynaphthalene using cyclic voltammetry or potentiometry and, notably, after the thermal treatment (800 °C, N 2 , 4 h) an assembly of interconnected networks of graphene strongly adhering to nanoporous silicon matrix resulted. Herein we demonstrate the achievement of an easy scalable technology for solid state supercapacitors on silicon, with excellent electrochemical properties. Accordingly, our symmetric supercapacitors (SSC) showed remarkable performance characteristics, comparable to many of the best high-power and/or high-energy carbon-based supercapacitors, their figures of merit matching under battery-like supercapacitor behaviour. Furthermore, the devices displayed high specific capacity values along with enhanced capacity retention even at ultra-high rates for voltage sweep, 5 V/s, or discharge current density, 100 A/g, respectively. The cycling stability tests performed at relatively high discharge current density of 10 A/g indicated good capacity retention, with a superior performance demonstrated for the electrodes obtained under cyclic voltammetry approach, which may be ascribed on the one hand to a better coverage of the porous silicon substrate and, on the other hand, to an improved resilience of the hybrid electrode to pore clogging.

Fabrication of Circuits on Flexible Substrates Using Conductive SU-8 for Sensing Applications

PubMed Central

Gerardo, Carlos D.; Cretu, Edmond; Rohling, Robert

2017-01-01

This article describes a new low-cost rapid microfabrication technology for high-density interconnects and passive devices on flexible substrates for sensing applications. Silver nanoparticles with an average size of 80 nm were used to create a conductive SU-8 mixture with a concentration of wt 25%. The patterned structures after hard baking have a sheet resistance of 11.17 Ω/☐. This conductive SU-8 was used to pattern planar inductors, capacitors and interconnection lines on flexible Kapton film. The conductive SU-8 structures were used as a seed layer for a subsequent electroplating process to increase the conductivity of the devices. Examples of inductors, resistor-capacitor (RC) and inductor-capacitor (LC) circuits, interconnection lines and a near-field communication (NFC) antenna are presented as a demonstration. As an example of high-resolution miniaturization, we fabricated microinductors having line widths of 5 μm. Mechanical bending tests were successful down to a 5 mm radius. To the best of the authors’ knowledge, this is the first report of conductive SU-8 used to fabricate such planar devices and the first on flexible substrates. This is a proof of concept that this fabrication approach can be used as an alternative for microfabrication of planar passive devices on flexible substrates. PMID:28629134

Vertically integrated, three-dimensional nanowire complementary metal-oxide-semiconductor circuits.

PubMed

Nam, SungWoo; Jiang, Xiaocheng; Xiong, Qihua; Ham, Donhee; Lieber, Charles M

2009-12-15

Three-dimensional (3D), multi-transistor-layer, integrated circuits represent an important technological pursuit promising advantages in integration density, operation speed, and power consumption compared with 2D circuits. We report fully functional, 3D integrated complementary metal-oxide-semiconductor (CMOS) circuits based on separate interconnected layers of high-mobility n-type indium arsenide (n-InAs) and p-type germanium/silicon core/shell (p-Ge/Si) nanowire (NW) field-effect transistors (FETs). The DC voltage output (V(out)) versus input (V(in)) response of vertically interconnected CMOS inverters showed sharp switching at close to the ideal value of one-half the supply voltage and, moreover, exhibited substantial DC gain of approximately 45. The gain and the rail-to-rail output switching are consistent with the large noise margin and minimal static power consumption of CMOS. Vertically interconnected, three-stage CMOS ring oscillators were also fabricated by using layer-1 InAs NW n-FETs and layer-2 Ge/Si NW p-FETs. Significantly, measurements of these circuits demonstrated stable, self-sustained oscillations with a maximum frequency of 108 MHz, which represents the highest-frequency integrated circuit based on chemically synthesized nanoscale materials. These results highlight the flexibility of bottom-up assembly of distinct nanoscale materials and suggest substantial promise for 3D integrated circuits.

Using Ant Colony Optimization for Routing in VLSI Chips

NASA Astrophysics Data System (ADS)

Arora, Tamanna; Moses, Melanie

2009-04-01

Rapid advances in VLSI technology have increased the number of transistors that fit on a single chip to about two billion. A frequent problem in the design of such high performance and high density VLSI layouts is that of routing wires that connect such large numbers of components. Most wire-routing problems are computationally hard. The quality of any routing algorithm is judged by the extent to which it satisfies routing constraints and design objectives. Some of the broader design objectives include minimizing total routed wire length, and minimizing total capacitance induced in the chip, both of which serve to minimize power consumed by the chip. Ant Colony Optimization algorithms (ACO) provide a multi-agent framework for combinatorial optimization by combining memory, stochastic decision and strategies of collective and distributed learning by ant-like agents. This paper applies ACO to the NP-hard problem of finding optimal routes for interconnect routing on VLSI chips. The constraints on interconnect routing are used by ants as heuristics which guide their search process. We found that ACO algorithms were able to successfully incorporate multiple constraints and route interconnects on suite of benchmark chips. On an average, the algorithm routed with total wire length 5.5% less than other established routing algorithms.

Prevalence and correlates of hypertension in Maharashtra, India: A multilevel analysis

PubMed Central

Bhise, Mahadev D.

2018-01-01

Background and aim In the last few decades, the prevalence of hypertension has been drastically increased in India. The present study estimates the current prevalence of hypertension and its correlates in the state of Maharashtra. The variation in the prevalence of hypertension associated with individual-level characteristics is explained at the community and district level. Methods Data is used from the recent round of District Level Household & Facility Survey (DLHS-4), 2012–13. The DLHS-4 has used the nationally representative sample, collected through multistage stratified sampling procedure. A similar sampling frame, used in NSSO-2007-08, has been followed. The chi-square test is used to show the significance level of the association between the estimated prevalence of hypertension and its correlates. Multilevel regression analysis is carried out to investigate the effects of individual and community level factors on the prevalence of hypertension. Results The overall prevalence of hypertension is 25% in Maharashtra, and a huge variation in the prevalence of hypertension is found across the districts. Dhule, Gadchiroli (with a low HDI rank), Mumbai and Satara (with higher HDI rank) are the districts with the higher (above 30%) prevalence of high blood pressure. The prevalence also significantly varies according to different correlates. The prevalence of high blood pressure is higher among elderly population (40%), among males (28%), in the urban areas (27%) and in the richest wealth quintile (28%). The prevalence is also higher among cigarette smokers (31%), alcohol consumers (30%) and people with obesity (38%) as compared to their counterparts. The results of the multilevel analysis show that the older and obese persons are at four-time higher risk of hypertension. Again, age, sex, marital status, place of residence, wealth status, unhealthy habits (i.e. smoking and alcohol consumption) and BMI are significantly associated with hypertension. The results of VPC statistics show that 14% of hypertension prevalence could be attributed to differences at the community level. Conclusion The prevalence of hypertension largely varies in the districts of Maharashtra irrespective of their level of socio-economic development (i.e. HDI rank). The variation in the rate of prevalence of hypertension is higher in the community (PSU) level as compared to the variation in the prevalence rate at the district level. Hypertension is attributable to the modifiable factors like risky lifestyle practices. PMID:29401464

Association of Sex With the Global Burden of Cataract.

PubMed

Lou, Lixia; Ye, Xin; Xu, Peifang; Wang, Jingyi; Xu, Yufeng; Jin, Kai; Ye, Juan

2018-02-01

Eye disease burden could help guide health policy making. Differences in cataract burden by sex is a major concern of reducing avoidable blindness caused by cataract. To investigate the association of sex with the global burden of cataract by year, age, and socioeconomic status using disability-adjusted life-years (DALYs). This international, comparative burden-of-disease study extracted the global, regional, and national sex-specific DALY numbers, crude DALY rates, and age-standardized DALY rates caused by cataract by year and age from the Global Burden of Disease Study 2015. The DALY data were collected from January 1, 1990, through December 31, 2015, for ever 5 years. The human development index (HDI) in 2015 was extracted as an indicator of national socioeconomic status from the Human Development Report. Comparisons of sex-specific DALY estimates due to cataract by year, age, and socioeconomic status at the global level. Paired Wilcoxon signed rank test, Pearson correlation, and linear regression analyses were performed to evaluate the socioeconomic-associated sex differences in cataract burden. Differences in rates of cataract by sex were similar between 1990 and 2015, with age-standardized DALY rates of 54.5 among men vs 65.0 among women in 1990 and 52.3 among men vs 67.0 among women in 2015. Women had higher rates than men of the same age, and sexual differences increased with age. Paired Wilcoxon signed rank test revealed that age-standardized DALY rates among women were higher than those among men for each HDI-based country group (z range, -4.236 to -6.093; P < .001). The difference (female minus male) in age-standardized DALY rates (r = -0.610 [P < .001]; standardized β = -0.610 [P < .001]) and the female to male age-standardized DALY rate ratios (r = -0.180 [P = .02]; standardized β = -0.180 [P = .02]) were inversely correlated with HDI. Although global cataract health care is progressing, sexual differences in cataract burden showed little improvement in the past few decades. Worldwide, women have a higher cataract burden than men. Older age and lower socioeconomic status are associated with greater differences in rates of cataract by sex. Our findings may enhance public awareness of sexual differences in global cataract burden and emphasize the importance of making sex-sensitive health policy to manage global vision loss caused by cataract.

Prevalence and correlates of hypertension in Maharashtra, India: A multilevel analysis.

PubMed

Bhise, Mahadev D; Patra, Shraboni

2018-01-01

In the last few decades, the prevalence of hypertension has been drastically increased in India. The present study estimates the current prevalence of hypertension and its correlates in the state of Maharashtra. The variation in the prevalence of hypertension associated with individual-level characteristics is explained at the community and district level. Data is used from the recent round of District Level Household & Facility Survey (DLHS-4), 2012-13. The DLHS-4 has used the nationally representative sample, collected through multistage stratified sampling procedure. A similar sampling frame, used in NSSO-2007-08, has been followed. The chi-square test is used to show the significance level of the association between the estimated prevalence of hypertension and its correlates. Multilevel regression analysis is carried out to investigate the effects of individual and community level factors on the prevalence of hypertension. The overall prevalence of hypertension is 25% in Maharashtra, and a huge variation in the prevalence of hypertension is found across the districts. Dhule, Gadchiroli (with a low HDI rank), Mumbai and Satara (with higher HDI rank) are the districts with the higher (above 30%) prevalence of high blood pressure. The prevalence also significantly varies according to different correlates. The prevalence of high blood pressure is higher among elderly population (40%), among males (28%), in the urban areas (27%) and in the richest wealth quintile (28%). The prevalence is also higher among cigarette smokers (31%), alcohol consumers (30%) and people with obesity (38%) as compared to their counterparts. The results of the multilevel analysis show that the older and obese persons are at four-time higher risk of hypertension. Again, age, sex, marital status, place of residence, wealth status, unhealthy habits (i.e. smoking and alcohol consumption) and BMI are significantly associated with hypertension. The results of VPC statistics show that 14% of hypertension prevalence could be attributed to differences at the community level. The prevalence of hypertension largely varies in the districts of Maharashtra irrespective of their level of socio-economic development (i.e. HDI rank). The variation in the rate of prevalence of hypertension is higher in the community (PSU) level as compared to the variation in the prevalence rate at the district level. Hypertension is attributable to the modifiable factors like risky lifestyle practices.

On the Climate Variability and Energy Demands for Indoor Human Comfort Levels in Tropical Urban Environment

NASA Astrophysics Data System (ADS)

Pokhrel, R.; Ortiz, L. E.; González, J. E.; Ramírez-Beltran, N. D.

2017-12-01

The main objective of this study is to identify how climate variability influences human comfort levels in tropical urban environments. San Juan Metropolitan Area (SJMA) of the island of Puerto Rico was chosen as a reference point. A new human discomfort index (HDI) based on environmental enthalpy is defined. This index is expanded to determine the energy required to maintain indoor human comfort levels and was compared to Total Electricity consumption for the Island of Puerto Rico. Regression analysis shows that both Temperature and HDI are good indictor to predict total electrical energy consumption. Results showed that over the past 35 years the average enthalpy have increased and have mostly been above thresholds for human comfort for SJMA. The weather stations data further shows a clear indication of urbanization biases ramping up the index considered. From the trend analysis local scale (weather station) data shows a decreasing rate of maximum cooling at -11.41 kW-h/years, and minimum is increasing at 10.64 kW-h/years. To compare human comfort levels under extreme heat wave events conditions, an event of 2014 in the San Juan area was identified. The analysis for this extreme heat event is complemented by data from the National Center for environmental Prediction (NCEP) at 250km spatial resolution, North American Re-Analysis (NARR) at 32 km spatial resolution, by simulations of the Weather Forecasting System (WRF) at a resolution of 2 km, and by weather station data for San Juan. WRF simulation's results showed an improvement for both temperature and relative humidity from the input NCEP data. It also shows that difference in Energy per Capita (EPC) in urban area during a heat wave event can increase to 16% over a non-urban area. Sensitivity analysis was done by modifying the urban land cover to the most common rural references of evergreen broadleaf forest and cropland to investigate the Urban Heat Island (UHI) effect on HDI. UHI is seen to be maximum during heat wave event during late night and morning hours and minimum during afternoon and late evening hours. The effect of UHI is found to increase the total EPC by 20%.

Seasonal lake surface water temperature trends reflected by heterocyst glycolipid-based molecular thermometers

NASA Astrophysics Data System (ADS)

Bauersachs, T.; Rochelmeier, J.; Schwark, L.

2015-06-01

It has been demonstrated that the relative distribution of heterocyst glycolipids (HGs) in cultures of N2-fixing heterocystous cyanobacteria is largely controlled by growth temperature, suggesting a potential use of these components in paleoenvironmental studies. Here, we investigated the effect of environmental parameters (e.g., surface water temperatures, oxygen concentrations and pH) on the distribution of HGs in a natural system using water column filtrates collected from Lake Schreventeich (Kiel, Germany) from late July to the end of October 2013. HPLC-ESI/MS (high-performance liquid chromatography coupled to electrospray ionization-mass spectrometry) analysis revealed a dominance of 1-(O-hexose)-3,25-hexacosanediols (HG26 diols) and 1-(O-hexose)-3-keto-25-hexacosanol (HG26 keto-ol) in the solvent-extracted water column filtrates, which were accompanied by minor abundances of 1-(O-hexose)-3,27-octacosanediol (HG28 diol) and 1-(O-hexose)-3-keto-27-octacosanol (HG28 keto-ol) as well as 1-(O-hexose)-3,25,27-octacosanetriol (HG28 triol) and 1-(O-hexose)-3-keto-25,27-octacosanediol (HG28 keto-diol). Fractional abundances of alcoholic and ketonic HGs generally showed strong linear correlations with surface water temperatures and no or only weak linear correlations with both oxygen concentrations and pH. Changes in the distribution of the most abundant diol and keto-ol (e.g., HG26 diol and HG26 keto-ol) were quantitatively expressed as the HDI26 (heterocyst diol index of 26 carbon atoms) with values of this index ranging from 0.89 in mid-August to 0.66 in mid-October. An average HDI26 value of 0.79, which translates into a calculated surface water temperature of 15.8 ± 0.3 °C, was obtained from surface sediments collected from Lake Schreventeich. This temperature - and temperatures obtained from other HG indices (e.g., HDI28 and HTI28) - is similar to the one measured during maximum cyanobacterial productivity in early to mid-September and suggests that HGs preserved in the sediment record of Lake Schreventeich reflect summer surface water temperatures. As N2-fixing heterocystous cyanobacteria are widespread in present-day freshwater and brackish environments, we conclude that the distribution of HGs in sediments may allow for the reconstruction of surface water temperatures of modern and potentially ancient lacustrine settings.

Direct synthesis of highly porous interconnected carbon nanosheets and their application as high-performance supercapacitors.

PubMed

Sevilla, Marta; Fuertes, Antonio B

2014-05-27

An easy, one-step procedure is proposed for the synthesis of highly porous carbon nanosheets with an excellent performance as supercapacitor electrodes. The procedure is based on the carbonization of an organic salt, i.e., potassium citrate, at a temperature in the 750-900 °C range. In this way, carbon particles made up of interconnected carbon nanosheets with a thickness of <80 nm are obtained. The porosity of the carbon nanosheets consists essentially of micropores distributed in two pore systems of 0.7-0.85 nm and 0.95-1.6 nm. Importantly, the micropore sizes of both systems can be enlarged by simply increasing the carbonization temperature. Furthermore, the carbon nanosheets possess BET surface areas in the ∼1400-2200 m(2) g(-1) range and electronic conductivities in the range of 1.7-7.4 S cm(-1) (measured at 7.1 MPa). These materials behave as high-performance supercapacitor electrodes in organic electrolyte and exhibit an excellent power handling ability and a superb robustness over long-term cycling. Excellent results were obtained with the supercapacitor fabricated from the material synthesized at 850 °C in terms of both gravimetric and volumetric energy and power densities. This device was able to deliver ∼13 Wh kg(-1) (5.2 Wh L(-1)) at an extremely high power density of 78 kW kg(-1) (31 kW L(-1)) and ∼30 Wh kg(-1) (12 Wh L(-1)) at a power density of 13 kW kg(-1) (5.2 kW L(-1)) (voltage range of 2.7 V).

High-speed, bi-directional dual-core fiber transmission system for high-density, short-reach optical interconnects

NASA Astrophysics Data System (ADS)

Geng, Ying; Li, Shenping; Li, Ming-Jun; Sutton, Clifford G.; McCollum, Robert L.; McClure, Randy L.; Koklyushkin, Alexander V.; Matthews, Karen I.; Luther, James P.; Butler, Douglas L.

2015-03-01

A complete single mode dual-core fiber system for short-reach optical interconnects is fabricated and tested for high-speed data transmission. It includes dual-core fibers capable of bi-directional data transmission, dual-core simplex LC connectors, and fan-outs. The transmission system offers simplified bi-directional traffic engineering with integrated bidirectional transceivers and compact system design, utilizing simplex dual-core LC connectors that use half the space while increasing the bandwidth density by a factor of two. The fiber has two cores that are compatible with single mode fiber and conforms to the industry standard outer diameter of 125 μm. This reduces operational complexity by reducing the size and number of fibers, cables and connectors. Measured OTDR loss for both cores was 0.34 dB/km at 1310 nm and 0.19 dB/km at 1550 nm. Crosstalk for a piece of 5.8 km long dual-core fiber was measured to be below -75 dB at 1310 nm, and below -40 dB at 1550 nm. Both free-space optics fan-outs and tapered-fiber-coupler based MCF fan-outs were evaluated for the transmission system. Error-free and penalty-free 25 Gb/s bi-directional transmission performance was demonstrated for three different fiber lengths, 200 m, 2 km and 10 km, using the complete all-fiber-based system including connectors and fan-outs. This single mode, dual-core fiber transmission system adds complementary value to systems where additional increases in bandwidth density can come from wavelength division multiplexing and multiple bits per symbol.

Incidence and mortality of lung cancer: global trends and association with socioeconomic status.

PubMed

Wong, Martin C S; Lao, Xiang Qian; Ho, Kin-Fai; Goggins, William B; Tse, Shelly L A

2017-10-30

We examined the correlation between lung cancer incidence/mortality and country-specific socioeconomic development, and evaluated its most recent global trends. We retrieved its age-standardized incidence rates from the GLOBOCAN database, and temporal patterns were assessed from global databases. We employed simple linear regression analysis to evaluate their correlations with Human Development Index (HDI) and Gross Domestic Product (GDP) per capita. The average annual percent changes (AAPC) of the trends were evaluated from join-point regression analysis. Country-specific HDI was strongly correlated with age-standardized incidence (r = 0.70) and mortality (r = 0.67), and to a lesser extent GDP (r = 0.24 to 0.55). Among men, 22 and 30 (out of 38 and 36) countries showed declining incidence and mortality trends, respectively; whilst among women, 19 and 16 countries showed increasing incidence and mortality trends, respectively. Among men, the AAPCs ranged from -2.8 to -0.6 (incidence) and -3.6 to -1.1 (mortality) in countries with declining trend, whereas among women the AAPC range was 0.4 to 8.9 (incidence) and 1 to 4.4 (mortality) in countries with increasing trend. Among women, Brazil, Spain and Cyprus had the greatest incidence increase, and all countries in Western, Southern and Eastern Europe reported increasing mortality. These findings highlighted the need for targeted preventive measures.

Human development, occupational structure and physical inactivity among 47 low and middle income countries

PubMed Central

Atkinson, Kaitlin; Lowe, Samantha; Moore, Spencer

2015-01-01

This study aimed to (a) assess the relationship between a person's occupational category and their physical inactivity, and (b) analyze the association among country-level variables and physical inactivity. The World Health Survey (WHS) was administered in 2002–2003 among 47 low- and middle-income countries (n = 196,742). The International Physical Activity Questionnaire (IPAQ) was used to collect verbal reports of physical activity and convert responses into measures of physical inactivity. Economic development (GDP/c), degree of urbanization, and the Human Development Index (HDI) were used to measure country-level variables and physical inactivity. Multilevel logistic regression analysis was used to examine the association among country-level factors, individual occupational status, and physical inactivity. Overall, the worldwide prevalence of physical inactivity in 2002–2003 was 23.7%. Individuals working in the white-collar industry compared to agriculture were 84% more likely to be physically inactive (OR: 1.84, CI: 1.73–1.95). Among low- and middle-income countries increased HDI values were associated with decreased levels of physical inactivity (OR: 0.98, CI: 0.97–0.99). This study is one of the first to adjust for within-country differences, specifically occupation while analyzing physical inactivity. As countries experience economic development, changes are also seen in their occupational structure, which result in increased countrywide physical inactivity levels. PMID:26844185

Human development, occupational structure and physical inactivity among 47 low and middle income countries.

PubMed

Atkinson, Kaitlin; Lowe, Samantha; Moore, Spencer

2016-06-01

This study aimed to (a) assess the relationship between a person's occupational category and their physical inactivity, and (b) analyze the association among country-level variables and physical inactivity. The World Health Survey (WHS) was administered in 2002-2003 among 47 low- and middle-income countries (n = 196,742). The International Physical Activity Questionnaire (IPAQ) was used to collect verbal reports of physical activity and convert responses into measures of physical inactivity. Economic development (GDP/c), degree of urbanization, and the Human Development Index (HDI) were used to measure country-level variables and physical inactivity. Multilevel logistic regression analysis was used to examine the association among country-level factors, individual occupational status, and physical inactivity. Overall, the worldwide prevalence of physical inactivity in 2002-2003 was 23.7%. Individuals working in the white-collar industry compared to agriculture were 84% more likely to be physically inactive (OR: 1.84, CI: 1.73-1.95). Among low- and middle-income countries increased HDI values were associated with decreased levels of physical inactivity (OR: 0.98, CI: 0.97-0.99). This study is one of the first to adjust for within-country differences, specifically occupation while analyzing physical inactivity. As countries experience economic development, changes are also seen in their occupational structure, which result in increased countrywide physical inactivity levels.

Development of Photocrosslinkable Urethane-Doped Polyester Elastomers for Soft Tissue Engineering

PubMed Central

Zhang, Yi; Tran, Richard T.; Gyawali, Dipendra; Yang, Jian

2012-01-01

Finding an ideal biomaterial with the proper mechanical properties and biocompatibility has been of intense focus in the field of soft tissue engineering. This paper reports on the synthesis and characterization of a novel crosslinked urethane-doped polyester elastomer (CUPOMC), which was synthesized by reacting a previously developed photocrosslinkable poly (octamethylene maleate citrate) (POMC) prepolymers (pre-POMC) with 1,6-hexamethylene diisocyanate (HDI) followed by thermo- or photo-crosslinking polymerization. The mechanical properties of the CUPOMCs can be tuned by controlling the molar ratios of pre-POMC monomers, and the ratio between the prepolymer and HDI. CUPOMCs can be crosslinked into a 3D network through polycondensation or free radical polymerization reactions. The tensile strength and elongation at break of CUPOMC synthesized under the known conditions range from 0.73±0.12MPa to 10.91±0.64MPa and from 72.91±9.09% to 300.41±21.99% respectively. Preliminary biocompatibility tests demonstrated that CUPOMCs support cell adhesion and proliferation. Unlike the pre-polymers of other crosslinked elastomers, CUPOMC pre-polymers possess great processability demonstrated by scaffold fabrication via a thermally induced phase separation method. The dual crosslinking methods for CUPOMC pre-polymers should enhance the versatile processability of the CUPOMC used in various conditions. Development of CUPOMC should expand the choices of available biodegradable elastomers for various biomedical applications such as soft tissue engineering. PMID:23565318

Predictive global trends in the incidence and mortality of pancreatic cancer based on geographic location, socio-economic status, and demographic shift.

PubMed

Are, Chandrakanth; Chowdhury, Sanjib; Ahmad, Humera; Ravipati, Advaitaa; Song, Tianqiang; Shrikandhe, Shailesh; Smith, Lynette

2016-11-01

Pancreatic Cancer (PC) is a lethal malignancy that accounts for about 4% of cancer-related deaths worldwide. The aim of this study is to describe the influence of geography (based on WHO regions), socio-economic development (based on Human Development Index [HDI]) and demographic shift on the temporal trends in global incidence and mortality of PC. Data (2012-2030) relating to the incidence, mortality of PC and demographic shifts based on WHO regions and HDI areas were extracted from GLOBOCAN 2012. Linear regression was used to evaluate trends in total incidence and mortality. We noted a definite association between PC and higher socio-economic status. Advanced age (age ≥65) contributed to the rising burden in all socio-economic regions of the world except in the Low Human Development (LHD) countries where the disease predominantly affected population <65 years of age. The global burden of PC is expected to rise significantly over the next few decades regardless of geographic location, socio-economic development, age and gender. Advance knowledge of this data can help formulate strategies to specifically target countries and populations that promote public health policy to tackle this lethal disease on the global stage. J. Surg. Oncol. 2016;114:736-742. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Three-Dimensional Integrated Circuit (3D IC) Key Technology: Through-Silicon Via (TSV).

PubMed

Shen, Wen-Wei; Chen, Kuan-Neng

2017-12-01

3D integration with through-silicon via (TSV) is a promising candidate to perform system-level integration with smaller package size, higher interconnection density, and better performance. TSV fabrication is the key technology to permit communications between various strata of the 3D integration system. TSV fabrication steps, such as etching, isolation, metallization processes, and related failure modes, as well as other characterizations are discussed in this invited review paper.

Interconnections in ULSI: Correlation and Crosstalk

DTIC Science & Technology

1992-12-31

basic tool is electron beam lithography of poly (methyl methacrylate) (PMMA). The two central issues to creating very dense patterns as described...direct lithographic techniques. Fig. 2: Ti/Au (2 nm/15 nm) grating with 38 nm pitch fabricated by electron beam lithography using our high contrast...G. H. Bernstein, G. Bazan, and D. A. Hill, "Spatial Density of Lines in PMMA by Electron Beam Lithography ," Journal of Vacuum Science and Technology

Ultra-low density microcellular polymer foam and method

DOEpatents

Simandl, Ronald F.; Brown, John D.

1996-01-01

An ultra-low density, microcellular open-celled polymer foam and a method for making such foam. A polymer is dissolved in a heated solution consisting essentially of at least one solvent for the dissolution of the polymer in the heated solution and the phase inversion of the dissolved polymer to a liquid gel upon sufficient cooling of the heated solution. The heated solution is contained in a containment means provided with a nucleating promoting means having a relatively rough surface formed of fixed nucleating sites. The heated solution is cooled for a period of time sufficient to form a liquid gel of the polymer by phase inversion. From the gel, a porous foam having a density of less than about 12.0 mg/cm.sup.3 and open porosity provided by well interconnected strut morphology is formed.

Ultra-low density microcellular polymer foam and method

DOEpatents

Simandl, R.F.; Brown, J.D.

1996-03-19

An ultra-low density, microcellular open-celled polymer foam and a method for making such foam are disclosed. A polymer is dissolved in a heated solution consisting essentially of at least one solvent for the dissolution of the polymer in the heated solution and the phase inversion of the dissolved polymer to a liquid gel upon sufficient cooling of the heated solution. The heated solution is contained in a containment means provided with a nucleating promoting means having a relatively rough surface formed of fixed nucleating sites. The heated solution is cooled for a period of time sufficient to form a liquid gel of the polymer by phase inversion. From the gel, a porous foam having a density of less than about 12.0 mg/cm{sup 3} and open porosity provided by well interconnected strut morphology is formed.

The Influence of Sn Orientation on the Electromigration of Idealized Lead-free Interconnects

NASA Astrophysics Data System (ADS)

Linares, Xioranny

As conventional lead solders are being replaced by Pb-free solders in electronic devices, the reliability of solder joints in integrated circuits (ICs) has become a high concern. Due to the miniaturization of ICs and consequently solder joints, the current density through the solder interconnects has increased causing electrical damage known as electromigration. Electromigration, atomic and mass migration due to high electron currents, is one of the most urgent reliability issues delaying the implementation of Pb-free solder materials in electronic devices. The research on Pb-free solders has mainly focused on the qualitative understanding of failure by electromigration. There has been little progress however, on the quantitative analysis of electromigration because of the lack of available material parameters, such as the effective charge, (z*), the driving force for electromigration. The research herein uses idealized interconnects to measure the z* of electromigration of Cu in Sn-3.0Ag-0.5Cu (SAC305) alloy under different experimental conditions. Planar SAC 305 interconnects were sandwiched between two Cu pads and subject to uniaxial current. The crystallographic orientation of Sn in these samples were characterized with electron backscatter diffraction (EBSD) and wavelength dispersive spectroscopy (WDS) before and after electromigration testing. Results indicate that samples with the c-axis aligned perpendicular to current flow, polycrystalline, and those with a diffusion barrier on the cathode side all inhibit the growth of intermetallic compounds (IMC). The effective charge values of Cu in SAC 305 under the different conditions tested were quantified for the first time and included in this dissertation. The following research is expected to help verify and improve the electromigration model and identify the desirable conditions to inhibit damage by electromigration in Pb-free solder joints.

How thin barrier metal can be used to prevent Co diffusion in the modern integrated circuits?

NASA Astrophysics Data System (ADS)

Dixit, Hemant; Konar, Aniruddha; Pandey, Rajan; Ethirajan, Tamilmani

2017-11-01

In modern integrated circuits (ICs), billions of transistors are connected to each other via thin metal layers (e.g. copper, cobalt, etc) known as interconnects. At elevated process temperatures, inter-diffusion of atomic species can occur among these metal layers, causing sub-optimal performance of interconnects, which may lead to the failure of an IC. Thus, typically a thin barrier metal layer is used to prevent the inter-diffusion of atomic species within interconnects. For ICs with sub-10 nm transistors (10 nm technology node), the design rule (thickness scaling) demands the thinnest possible barrier layer. Therefore, here we investigate the critical thickness of a titanium-nitride (TiN) barrier that can prevent the cobalt diffusion using multi-scale modeling and simulations. First, we compute the Co diffusion barrier in crystalline and amorphous TiN with the nudged elastic band method within first-principles density functional theory simulations. Later, using the calculated activation energy barriers, we quantify the Co diffusion length in the TiN metal layer with the help of kinetic Monte Carlo simulations. Such a multi-scale modelling approach yields an exact critical thickness of the metal layer sufficient to prevent the Co diffusion in IC interconnects. We obtain a diffusion length of a maximum of 2 nm for a typical process of thermal annealing at 400 °C for 30 min. Our study thus provides useful physical insights for the Co diffusion in the TiN layer and further quantifies the critical thickness (~2 nm) to which the metal barrier layer can be thinned down for sub-10 nm ICs.

Advancing interconnect density for spiking neural network hardware implementations using traffic-aware adaptive network-on-chip routers.

PubMed

Carrillo, Snaider; Harkin, Jim; McDaid, Liam; Pande, Sandeep; Cawley, Seamus; McGinley, Brian; Morgan, Fearghal

2012-09-01

The brain is highly efficient in how it processes information and tolerates faults. Arguably, the basic processing units are neurons and synapses that are interconnected in a complex pattern. Computer scientists and engineers aim to harness this efficiency and build artificial neural systems that can emulate the key information processing principles of the brain. However, existing approaches cannot provide the dense interconnect for the billions of neurons and synapses that are required. Recently a reconfigurable and biologically inspired paradigm based on network-on-chip (NoC) and spiking neural networks (SNNs) has been proposed as a new method of realising an efficient, robust computing platform. However, the use of the NoC as an interconnection fabric for large-scale SNNs demands a good trade-off between scalability, throughput, neuron/synapse ratio and power consumption. This paper presents a novel traffic-aware, adaptive NoC router, which forms part of a proposed embedded mixed-signal SNN architecture called EMBRACE (EMulating Biologically-inspiRed ArChitectures in hardwarE). The proposed adaptive NoC router provides the inter-neuron connectivity for EMBRACE, maintaining router communication and avoiding dropped router packets by adapting to router traffic congestion. Results are presented on throughput, power and area performance analysis of the adaptive router using a 90 nm CMOS technology which outperforms existing NoCs in this domain. The adaptive behaviour of the router is also verified on a Stratix II FPGA implementation of a 4 × 2 router array with real-time traffic congestion. The presented results demonstrate the feasibility of using the proposed adaptive NoC router within the EMBRACE architecture to realise large-scale SNNs on embedded hardware. Copyright © 2012 Elsevier Ltd. All rights reserved.

A Novel Polar Copolymer Design as a Multi-Functional Binder for Strong Affinity of Polysulfides in Lithium-Sulfur Batteries

NASA Astrophysics Data System (ADS)

Jiao, Yu; Chen, Wei; Lei, Tianyu; Dai, Liping; Chen, Bo; Wu, Chunyang; Xiong, Jie

2017-03-01

High energy density, low cost and environmental friendliness are the advantages of lithium-sulfur (Li-S) battery which is regarded as a promising device for electrochemical energy storage systems. As one of the important ingredients in Li-S battery, the binder greatly affects the battery performance. However, the conventional binder has some drawbacks such as poor capability of absorbing hydrophilic lithium polysulfides, resulting in severe capacity decay. In this work, we reported a multi-functional polar binder (AHP) by polymerization of hexamethylene diisocyanate (HDI) with ethylenediamine (EDA) bearing a large amount of amino groups, which were successfully used in electrode preparation with commercial sulfur powder cathodes. The abundant amide groups of the binder endow the cathode with multidimensional chemical bonding interaction with sulfur species within the cathode to inhibit the shuttling effect of polysulfides, while the suitable ductility to buffer volume change. Utilizing these advantageous features, composite C/S cathodes based the binder displayed excellent capacity retention at 0.5 C, 1 C, 1.5 C, and 3 C over 200 cycles. Accompany with commercial binder, AHP may act as an alternative feedstock to open a promising approach for sulfur cathodes in rechargeable lithium battery to achieve commercial application.

Bayesian inference for OPC modeling

NASA Astrophysics Data System (ADS)

Burbine, Andrew; Sturtevant, John; Fryer, David; Smith, Bruce W.

2016-03-01

The use of optical proximity correction (OPC) demands increasingly accurate models of the photolithographic process. Model building and inference techniques in the data science community have seen great strides in the past two decades which make better use of available information. This paper aims to demonstrate the predictive power of Bayesian inference as a method for parameter selection in lithographic models by quantifying the uncertainty associated with model inputs and wafer data. Specifically, the method combines the model builder's prior information about each modelling assumption with the maximization of each observation's likelihood as a Student's t-distributed random variable. Through the use of a Markov chain Monte Carlo (MCMC) algorithm, a model's parameter space is explored to find the most credible parameter values. During parameter exploration, the parameters' posterior distributions are generated by applying Bayes' rule, using a likelihood function and the a priori knowledge supplied. The MCMC algorithm used, an affine invariant ensemble sampler (AIES), is implemented by initializing many walkers which semiindependently explore the space. The convergence of these walkers to global maxima of the likelihood volume determine the parameter values' highest density intervals (HDI) to reveal champion models. We show that this method of parameter selection provides insights into the data that traditional methods do not and outline continued experiments to vet the method.

High-voltage space-plasma interactions measured on the PASP Plus test arrays

NASA Astrophysics Data System (ADS)

Guidice, Donald A.

1995-10-01

The Photovoltaic Array Space Power Plus Diagnostics (PASP Plus) experiment was developed by the Air Force's Phillips Laboratory with support from NASA's Lewis Research Center. It was launched on the Advanced Photovoltaic and Electronics EXperiments (APEX) satellite on August 3, 1994 into a 70 degree inclination, 363 km by 2550 km elliptical orbit. This orbit allows the investigation of space plasma effects on high-voltage operation (leakage current at positive voltages and arcing at negative voltages) in the perigee region. PASP Plus is testing twelve solar arrays. There are four planar Si arrays: an old standard type (used as a reference), the large-cell Space Station Freedom (SSF) array, a thin 'APSA' array, and an amorphous Si array. Next are three GaAs on Ge planar arrays and three new material planar arrays, including InP and two multijunction types. Finally, there are two concentrator arrays: a reflective-focusing Mini-Cassegrainian and a Fresnel-lens focusing Mini-Dome. PASP Plus's diagnostic sensors include: Langmuir probe to measure plasma density, an electrostatic analyzer (ESA) to measure the 30 eV to 30 KeV electron/ion spectra and determine vehicle negative potential during positive biasing, and a transient pulse monitor (TPM) to characterize the arcs that occur during the negative biasing. Through positive biasing of its test arrays, PASP Plus investigated the snapover phenomenon, which took place over the range of +100 to +300 V. It was found that array configurations where the interconnects are shielded from the space plasma (i.e., the concentrators or arrays with 'wrap-through' connectors) have lower leakage current. The concentrators exhibited negligible leakage current over the whole range up to +500 V. In the case of two similar GaAs on Ge arrays, the one with 'wrap-through' connectors had lower leakage current than the one with conventional interconnects. Through negative biasing, PASP Plus investigated the arcing rates of its test arrays. The standard Si array, with its old construction (exposed rough-surface interconnects), arced significantly over a wide voltage and plasma-density range. The other arrays arced at very low rates, mostly at voltages greater than -350 V and plasma densities near or greater than 10(exp 5)/cm(exp -3). AS expected according to theory, arcing was more prevalent when array temperatures were cold (based on biasing in eclipse).

High-voltage space-plasma interactions measured on the PASP Plus test arrays

NASA Technical Reports Server (NTRS)

Guidice, Donald A.

1995-01-01

The Photovoltaic Array Space Power Plus Diagnostics (PASP Plus) experiment was developed by the Air Force's Phillips Laboratory with support from NASA's Lewis Research Center. It was launched on the Advanced Photovoltaic and Electronics EXperiments (APEX) satellite on August 3, 1994 into a 70 degree inclination, 363 km by 2550 km elliptical orbit. This orbit allows the investigation of space plasma effects on high-voltage operation (leakage current at positive voltages and arcing at negative voltages) in the perigee region. PASP Plus is testing twelve solar arrays. There are four planar Si arrays: an old standard type (used as a reference), the large-cell Space Station Freedom (SSF) array, a thin 'APSA' array, and an amorphous Si array. Next are three GaAs on Ge planar arrays and three new material planar arrays, including InP and two multijunction types. Finally, there are two concentrator arrays: a reflective-focusing Mini-Cassegrainian and a Fresnel-lens focusing Mini-Dome. PASP Plus's diagnostic sensors include: Langmuir probe to measure plasma density, an electrostatic analyzer (ESA) to measure the 30 eV to 30 KeV electron/ion spectra and determine vehicle negative potential during positive biasing, and a transient pulse monitor (TPM) to characterize the arcs that occur during the negative biasing. Through positive biasing of its test arrays, PASP Plus investigated the snapover phenomenon, which took place over the range of +100 to +300 V. It was found that array configurations where the interconnects are shielded from the space plasma (i.e., the concentrators or arrays with 'wrap-through' connectors) have lower leakage current. The concentrators exhibited negligible leakage current over the whole range up to +500 V. In the case of two similar GaAs on Ge arrays, the one with 'wrap-through' connectors had lower leakage current than the one with conventional interconnects. Through negative biasing, PASP Plus investigated the arcing rates of its test arrays. The standard Si array, with its old construction (exposed rough-surface interconnects), arced significantly over a wide voltage and plasma-density range. The other arrays arced at very low rates, mostly at voltages greater than -350 V and plasma densities near or greater than 10(exp 5)/cm(exp -3). AS expected according to theory, arcing was more prevalent when array temperatures were cold (based on biasing in eclipse).

Interconnect assembly for an electronic assembly and assembly method therefor

DOEpatents

Gerbsch, Erich William

2003-06-10

An interconnect assembly and method for a semiconductor device, in which the interconnect assembly can be used in lieu of wirebond connections to form an electronic assembly. The interconnect assembly includes first and second interconnect members. The first interconnect member has a first surface with a first contact and a second surface with a second contact electrically connected to the first contact, while the second interconnect member has a flexible finger contacting the second contact of the first interconnect member. The first interconnect member is adapted to be aligned and registered with a semiconductor device having a contact on a first surface thereof, so that the first contact of the first interconnect member electrically contacts the contact of the semiconductor device. Consequently, the assembly method does not require any wirebonds, but instead merely entails aligning and registering the first interconnect member with the semiconductor device so that the contacts of the first interconnect member and the semiconductor device make electrically contact, and then contacting the second contact of the first interconnect member with the flexible finger of the second interconnect member.

Inhibition of HIF-2.alpha. heterodimerization with HIF1.beta. (ARNT)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruick, Richard K.; Caldwell, Charles G.; Frantz, Doug E.

2017-09-12

Provided is a method of inhibiting heterodimerization of HIF-2.alpha. to HIF1.beta. (ARNT) comprising binding certain small molecules to the HIF-2.alpha. PAS-B domain cavity but not to HIF1.alpha. and inhibiting HIF-2.alpha. heterodimerization to HIF1.beta. (ARNT) but not inhibiting HIF1.alpha. heterodimerization to HIF1.beta. (ARNT). Those certain small molecules are also referenced synonymously as HIF2-HDI and HIF2.alpha. heterodimerization inhibitors and also simply as certain small molecules.

Operations Research Techniques for Human Factors Engineers

DTIC Science & Technology

1985-06-01

mathematical than Raiffa’s explanations. b) Raiffa, Howard. Decision Analisis : Introductory Lectutres on Choiceg~~a hdY9ETny a--s- s- se ia fly, 1968. A...response criterion (8)- d) Pastore , R.E., and Scheirer, C.J. "Signal Detection Theory: Considerations for General Application " itPs Nholo_ cal Bulletin...Relatioship: . N9--1: Joi Vonn rey and Sons, Tr-rppnT35 p -TT. 26. Rouse, William B. System Enin eerin? Models of Human-Machine Interaction. New Y E

Measurement of carbon nanotube microstructure relative density by optical attenuation and observation of size-dependent variations.

PubMed

Park, Sei Jin; Schmidt, Aaron J; Bedewy, Mostafa; Hart, A John

2013-07-21

Engineering the density of carbon nanotube (CNT) forest microstructures is vital to applications such as electrical interconnects, micro-contact probes, and thermal interface materials. For CNT forests on centimeter-scale substrates, weight and volume can be used to calculate density. However, this is not suitable for smaller samples, including individual microstructures, and moreover does not enable mapping of spatial density variations within the forest. We demonstrate that the relative mass density of individual CNT microstructures can be measured by optical attenuation, with spatial resolution equaling the size of the focused spot. For this, a custom optical setup was built to measure the transmission of a focused laser beam through CNT microstructures. The transmittance was correlated with the thickness of the CNT microstructures by Beer-Lambert-Bouguer law to calculate the attenuation coefficient. We reveal that the density of CNT microstructures grown by CVD can depend on their size, and that the overall density of arrays of microstructures is affected significantly by run-to-run process variations. Further, we use the technique to quantify the change in CNT microstructure density due to capillary densification. This is a useful and accessible metrology technique for CNTs in future microfabrication processes, and will enable direct correlation of density to important properties such as stiffness and electrical conductivity.

Three-Dimensional Nitrogen-Doped Hierarchical Porous Carbon as an Electrode for High-Performance Supercapacitors.

PubMed

Tang, Jing; Wang, Tao; Salunkhe, Rahul R; Alshehri, Saad M; Malgras, Victor; Yamauchi, Yusuke

2015-11-23

A facile and sustainable procedure for the synthesis of nitrogen-doped hierarchical porous carbons with a three-dimensional interconnected framework (NHPC-3D) was developed. The strategy, based on a colloidal crystal-templating method, utilizes nitrogenous dopamine as the precursor due to its unique properties, including self-polymerization under mild alkaline conditions, coating onto various surfaces, a high carbonization yield, and well-preserved nitrogen doping after heat treatment. The obtained NHPC-3D possesses a high surface area of 1056 m(2)  g(-1) , a large pore volume of 2.56 cm(3)  g(-1) , and a high nitrogen content of 8.2 wt %. The NHPC-3D is implemented as the electrode material of a supercapacitor and exhibits a specific capacitance as high as 252 F g(-1) at a current density of 2 A g(-1) . The device also shows a high capacitance retention of 75.7 % at a higher current density of 20 A g(-1) in aqueous electrolyte due to a sufficient surface area for charge accommodation, reversible pseudocapacitance, and minimized ion-transport resistance, as a result of the advantageous interconnected hierarchical porous texture. These results showcase NHPC-3D as a promising candidate for electrode materials in supercapacitors. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A novel two-step sintering for nano-hydroxyapatite scaffolds for bone tissue engineering

PubMed Central

Feng, Pei; Niu, Man; Gao, Chengde; Peng, Shuping; Shuai, Cijun

2014-01-01

In this study, nano-hydroxyapatite scaffolds with high mechanical strength and an interconnected porous structure were prepared using NTSS for the first time. The first step was performed using a laser characterized by the rapid heating to skip the surface diffusion and to obtain the driving force for grain boundary diffusion. Additionally, the interconnected porous structure was achieved by SLS. The second step consisted of isothermal heating in a furnace at a lower temperature (T2) than that of the laser beam to further increase the density and to suppress grain growth by exploiting the difference in kinetics between grain-boundary diffusion and grain-boundary migration. The results indicated that the mechanical properties first increased and then decreased as T2 was increased from 1050 to 1250°C. The optimal fracture toughness, compressive strength and stiffness were 1.69 MPam1/2, 18.68 MPa and 245.79 MPa, respectively. At the optimal point, the T2 was 1100°C, the grain size was 60 nm and the relative density was 97.6%. The decrease in mechanical properties was due to the growth of grains and the decomposition of HAP. The cytocompatibility test results indicated that cells adhered and spread well on the scaffolds. A bone-like apatite layer formed, indicating good bioactivity. PMID:24998362

High Energy Density All Solid State Asymmetric Pseudocapacitors Based on Free Standing Reduced Graphene Oxide-Co3O4 Composite Aerogel Electrodes.

PubMed

Ghosh, Debasis; Lim, Joonwon; Narayan, Rekha; Kim, Sang Ouk

2016-08-31

Modern flexible consumer electronics require efficient energy storage devices with flexible free-standing electrodes. We report a simple and cost-effective route to a graphene-based composite aerogel encapsulating metal oxide nanoparticles for high energy density, free-standing, binder-free flexible pseudocapacitive electrodes. Hydrothermally synthesized Co3O4 nanoparticles are successfully housed inside the microporous graphene aerogel network during the room temperature interfacial gelation at the Zn surface. The resultant three-dimensional (3D) rGO-Co3O4 composite aerogel shows mesoporous quasiparallel layer stack morphology with a high loading of Co3O4, which offers numerous channels for ion transport and a 3D interconnected network for high electrical conductivity. All solid state asymmetric pseudocapacitors employing the composite aerogel electrodes have demonstrated high areal energy density of 35.92 μWh/cm(2) and power density of 17.79 mW/cm(2) accompanied by excellent cycle life.

Nanoporous Silica Thermal Insulation for Space Shuttle Cryogenic Tanks: A Case Study

NASA Technical Reports Server (NTRS)

Noever, David A.

1999-01-01

Nanoporous silica (with typical 10-50 nm porous radii) has been benchmarked for thermal insulators capable of maintaining a 150 K/cm temperature gradient. For cryogenic use in aerospace applications, the combined features for low-density, high thermal insulation factors, and low temperature compatibility are demonstrated in a prototype sandwich structure between two propulsion tanks. Theoretical modelling based on a nanoscale fractal structure suggest that the thermal conductivity scales proportionally (exponent, 1.7) with the material density-lower density increases the thermal insulation rating. Computer simulations, however, support the optimization tradeoff between material strength (Young moduli, proportional to density with exponent, 3.7), the characteristic (colloidal silica, less than 5 nm) particle size, and the thermal rating. The results of these simulations indicate that as nanosized particles are incorporated into the silica backbone, the resulting physical properties will be tailored by the smallest characteristic length and their fractal interconnections (dimension and fractal size). The application specifies a prototype panel which takes advantage of the processing flexibility inherent in sol-gel chemistry.

The influence of microstructure on the probability of early failure in aluminum-based interconnects

NASA Astrophysics Data System (ADS)

Dwyer, V. M.

2004-09-01

For electromigration in short aluminum interconnects terminated by tungsten vias, the well known "short-line" effect applies. In a similar manner, for longer lines, early failure is determined by a critical value Lcrit for the length of polygranular clusters. Any cluster shorter than Lcrit is "immortal" on the time scale of early failure where the figure of merit is not the standard t50 value (the time to 50% failures), but rather the total probability of early failure, Pcf. Pcf is a complex function of current density, linewidth, line length, and material properties (the median grain size d50 and grain size shape factor σd). It is calculated here using a model based around the theory of runs, which has proved itself to be a useful tool for assessing the probability of extreme events. Our analysis shows that Pcf is strongly dependent on σd, and a change in σd from 0.27 to 0.5 can cause an order of magnitude increase in Pcf under typical test conditions. This has implications for the web-based two-dimensional grain-growth simulator MIT/EmSim, which generates grain patterns with σd=0.27, while typical as-patterned structures are better represented by a σd in the range 0.4 - 0.6. The simulator will consequently overestimate interconnect reliability due to this particular electromigration failure mode.

Environment of Submillimeter Galaxies

NASA Astrophysics Data System (ADS)

Hou, K.-c.; Chen, L.-w.

2013-10-01

To study the environment of high-redshift star-forming galaxies — submillimeter galaxies (SMGs) — and their role during large-scale structure formation, we have estimated the galaxy number density fluctuations around SMGs, and analyzed their cross correlation functions with Lyman alpha emitters (LAEs), and optical-selected galaxies with photometric redshift in the COSMOS and ECDFS fields. Only a marginal cross-correlation between SMGs and optical-selected galaxies at most redshifts intervals is found in our results, except a relatively strong correlation detected in the cases of AzTEC-detected SMGs with galaxies at z ˜2.6 and 3.6. The density fluctuations around SMGs with redshift estimated show most SMGs located in a high-density region. There is no correlation signal between LAEs and SMGs, and the galaxy density fluctuations indicate a slightly anti-correlation on a scale smaller than 2 Mpc. Furthermore, we also investigate the density fluctuations of passive and starforming galaxies selected by optical and near infrared colors at similar redshift around SMGs. Finally the implication from our results to the interconnection between high-redshift galaxy populations is discussed.

Stretchable metal oxide thin film transistors on engineered substrate for electronic skin applications.

PubMed

Romeo, Alessia; Lacour, Stphanie P

2015-08-01

Electronic skins aim at providing distributed sensing and computation in a large-area and elastic membrane. Control and addressing of high-density soft sensors will be achieved when thin film transistor matrices are also integrated in the soft carrier substrate. Here, we report on the design, manufacturing and characterization of metal oxide thin film transistors on these stretchable substrates. The TFTs are integrated onto an engineered silicone substrate with embedded strain relief to protect the devices from catastrophic cracking. The TFT stack is composed of an amorphous In-Ga-Zn-O active layer, a hybrid AlxOy/Parylene dielectric film, gold electrodes and interconnects. All layers are prepared and patterned with planar, low temperature and dry processing. We demonstrate the interconnected IGZO TFTs sustain applied tensile strain up to 20% without electrical degradation and mechanical fracture. Active devices are critical for distributed sensing. The compatibility of IGZO TFTs with soft and biocompatible substrates is an encouraging step towards wearable electronic skins.

Three-dimensional strutted graphene grown by substrate-free sugar blowing for high-power-density supercapacitors

PubMed Central

Wang, Xuebin; Zhang, Yuanjian; Zhi, Chunyi; Wang, Xi; Tang, Daiming; Xu, Yibin; Weng, Qunhong; Jiang, Xiangfen; Mitome, Masanori; Golberg, Dmitri; Bando, Yoshio

2013-01-01

Three-dimensional graphene architectures in the macroworld can in principle maintain all the extraordinary nanoscale properties of individual graphene flakes. However, current 3D graphene products suffer from poor electrical conductivity, low surface area and insufficient mechanical strength/elasticity; the interconnected self-supported reproducible 3D graphenes remain unavailable. Here we report a sugar-blowing approach based on a polymeric predecessor to synthesize a 3D graphene bubble network. The bubble network consists of mono- or few-layered graphitic membranes that are tightly glued, rigidly fixed and spatially scaffolded by micrometre-scale graphitic struts. Such a topological configuration provides intimate structural interconnectivities, freeway for electron/phonon transports, huge accessible surface area, as well as robust mechanical properties. The graphene network thus overcomes the drawbacks of presently available 3D graphene products and opens up a wide horizon for diverse practical usages, for example, high-power high-energy electrochemical capacitors, as highlighted in this work. PMID:24336225

Three-dimensional strutted graphene grown by substrate-free sugar blowing for high-power-density supercapacitors

NASA Astrophysics Data System (ADS)

Wang, Xuebin; Zhang, Yuanjian; Zhi, Chunyi; Wang, Xi; Tang, Daiming; Xu, Yibin; Weng, Qunhong; Jiang, Xiangfen; Mitome, Masanori; Golberg, Dmitri; Bando, Yoshio

2013-12-01

Three-dimensional graphene architectures in the macroworld can in principle maintain all the extraordinary nanoscale properties of individual graphene flakes. However, current 3D graphene products suffer from poor electrical conductivity, low surface area and insufficient mechanical strength/elasticity; the interconnected self-supported reproducible 3D graphenes remain unavailable. Here we report a sugar-blowing approach based on a polymeric predecessor to synthesize a 3D graphene bubble network. The bubble network consists of mono- or few-layered graphitic membranes that are tightly glued, rigidly fixed and spatially scaffolded by micrometre-scale graphitic struts. Such a topological configuration provides intimate structural interconnectivities, freeway for electron/phonon transports, huge accessible surface area, as well as robust mechanical properties. The graphene network thus overcomes the drawbacks of presently available 3D graphene products and opens up a wide horizon for diverse practical usages, for example, high-power high-energy electrochemical capacitors, as highlighted in this work.

Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems

NASA Astrophysics Data System (ADS)

Xu, Sheng; Zhang, Yihui; Cho, Jiung; Lee, Juhwan; Huang, Xian; Jia, Lin; Fan, Jonathan A.; Su, Yewang; Su, Jessica; Zhang, Huigang; Cheng, Huanyu; Lu, Bingwei; Yu, Cunjiang; Chuang, Chi; Kim, Tae-Il; Song, Taeseup; Shigeta, Kazuyo; Kang, Sen; Dagdeviren, Canan; Petrov, Ivan; Braun, Paul V.; Huang, Yonggang; Paik, Ungyu; Rogers, John A.

2013-02-01

An important trend in electronics involves the development of materials, mechanical designs and manufacturing strategies that enable the use of unconventional substrates, such as polymer films, metal foils, paper sheets or rubber slabs. The last possibility is particularly challenging because the systems must accommodate not only bending but also stretching. Although several approaches are available for the electronics, a persistent difficulty is in power supplies that have similar mechanical properties, to allow their co-integration with the electronics. Here we introduce a set of materials and design concepts for a rechargeable lithium ion battery technology that exploits thin, low modulus silicone elastomers as substrates, with a segmented design in the active materials, and unusual ‘self-similar’ interconnect structures between them. The result enables reversible levels of stretchability up to 300%, while maintaining capacity densities of ~1.1 mAh cm-2. Stretchable wireless power transmission systems provide the means to charge these types of batteries, without direct physical contact.

Mechanics analysis and design of fractal interconnects for stretchable batteries

NASA Astrophysics Data System (ADS)

Huang, Yonggang

2014-03-01

An important trend in electronics involves the development of materials, mechanical designs and manufacturing strategies that enable the use of unconventional substrates, such as polymer films, metal foils, paper sheets or rubber slabs. The last possibility is particularly challenging because the systems must accommodate not only bending but also stretching. Although several approaches are available for the electronics, a persistent difficulty is in power supplies that have similar mechanical properties, to allow their co-integration with the electronics. Here we introduce a set of materials and design concepts for a rechargeable lithium ion battery technology that exploits thin, low modulus silicone elastomers as substrates, with a segmented design in the active materials, and unusual ``self-similar'' interconnect structures between them. The result enables reversible levels of stretchability up to 300%, while maintaining capacity densities of ~1.1 mAh cm-2. Stretchable wireless power transmission systems provide the means to charge these types of batteries, without direct physical contact.

Vertically Aligned and Interconnected Boron Nitride Nanosheets for Advanced Flexible Nanocomposite Thermal Interface Materials.

PubMed

Chen, Jin; Huang, Xingyi; Sun, Bin; Wang, Yuxin; Zhu, Yingke; Jiang, Pingkai

2017-09-13

The continuous evolution toward semiconductor technology in the "more-than-Moore" era and rapidly increasing power density of modern electronic devices call for advanced thermal interface materials (TIMs). Here, we report a novel strategy to construct flexible polymer nanocomposite TIMs for advanced thermal management applications. First, aligned polyvinyl alcohol (PVA) supported and interconnected 2D boron nitride nanosheets (BNNSs) composite fiber membranes were fabricated by electrospinning. Then, the nanocomposite TIMs were constructed by rolling the PVA/BNNS composite fiber membranes to form cylinders and subsequently vacuum-assisted impregnation of polydimethylsiloxane (PDMS) into the porous cylinders. The nanocomposite TIMs not only exhibit a superhigh through-plane thermal conductivity enhancement of about 10 times at a low BNNS loading of 15.6 vol % in comparison with the pristine PDMS but also show excellent electrical insulating property (i.e., high volume electrical resistivity). The outstanding thermal management capability of the nanocomposite TIMs was practically confirmed by capturing the surface temperature variations of a working LED chip integrated with the nanocomposite TIMs.

Multi-petascale highly efficient parallel supercomputer

DOEpatents

Asaad, Sameh; Bellofatto, Ralph E.; Blocksome, Michael A.; Blumrich, Matthias A.; Boyle, Peter; Brunheroto, Jose R.; Chen, Dong; Cher, Chen -Yong; Chiu, George L.; Christ, Norman; Coteus, Paul W.; Davis, Kristan D.; Dozsa, Gabor J.; Eichenberger, Alexandre E.; Eisley, Noel A.; Ellavsky, Matthew R.; Evans, Kahn C.; Fleischer, Bruce M.; Fox, Thomas W.; Gara, Alan; Giampapa, Mark E.; Gooding, Thomas M.; Gschwind, Michael K.; Gunnels, John A.; Hall, Shawn A.; Haring, Rudolf A.; Heidelberger, Philip; Inglett, Todd A.; Knudson, Brant L.; Kopcsay, Gerard V.; Kumar, Sameer; Mamidala, Amith R.; Marcella, James A.; Megerian, Mark G.; Miller, Douglas R.; Miller, Samuel J.; Muff, Adam J.; Mundy, Michael B.; O'Brien, John K.; O'Brien, Kathryn M.; Ohmacht, Martin; Parker, Jeffrey J.; Poole, Ruth J.; Ratterman, Joseph D.; Salapura, Valentina; Satterfield, David L.; Senger, Robert M.; Smith, Brian; Steinmacher-Burow, Burkhard; Stockdell, William M.; Stunkel, Craig B.; Sugavanam, Krishnan; Sugawara, Yutaka; Takken, Todd E.; Trager, Barry M.; Van Oosten, James L.; Wait, Charles D.; Walkup, Robert E.; Watson, Alfred T.; Wisniewski, Robert W.; Wu, Peng

2015-07-14

A Multi-Petascale Highly Efficient Parallel Supercomputer of 100 petaOPS-scale computing, at decreased cost, power and footprint, and that allows for a maximum packaging density of processing nodes from an interconnect point of view. The Supercomputer exploits technological advances in VLSI that enables a computing model where many processors can be integrated into a single Application Specific Integrated Circuit (ASIC). Each ASIC computing node comprises a system-on-chip ASIC utilizing four or more processors integrated into one die, with each having full access to all system resources and enabling adaptive partitioning of the processors to functions such as compute or messaging I/O on an application by application basis, and preferably, enable adaptive partitioning of functions in accordance with various algorithmic phases within an application, or if I/O or other processors are underutilized, then can participate in computation or communication nodes are interconnected by a five dimensional torus network with DMA that optimally maximize the throughput of packet communications between nodes and minimize latency.

H3PO4 imbibed polyacrylamide-graft-chitosan frameworks for high-temperature proton exchange membranes

NASA Astrophysics Data System (ADS)

Yuan, Shuangshuang; Tang, Qunwei; He, Benlin; Chen, Haiyan; Li, Qinghua; Ma, Chunqing; Jin, Suyue; Liu, Zhichao

2014-03-01

Proton exchange membrane (PEM), transferring protons from anode to cathode, is a key component in a PEM fuel cell. In the current work, a new class of PEMs are synthesized benefiting from the imbibition behavior of three-dimensional (3D) polyacrylamide-graft-chitosan (PAAm-graft-chitosan) frameworks to H3PO4 aqueous solution. Interconnected 3D framework of PAAm-graft-chitosan provides tremendous space for holding proton-conducting H3PO4. The highest anhydrous proton conductivity of 0.13 S cm-1 at 165 °C is obtained. A fuel cell using a thick membrane as a PEM showed a peak power density of 405 mW cm-2 with O2 and H2 as the oxidant and fuel, respectively. Results indicate that the interconnected 3D framework provides superhighway for proton conduction. The valued merits on anhydrous proton conductivity, huge H3PO4 loading, and easy synthesis promise the new membranes to be good alternatives as high-temperature PEMs.

Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems.

PubMed

Xu, Sheng; Zhang, Yihui; Cho, Jiung; Lee, Juhwan; Huang, Xian; Jia, Lin; Fan, Jonathan A; Su, Yewang; Su, Jessica; Zhang, Huigang; Cheng, Huanyu; Lu, Bingwei; Yu, Cunjiang; Chuang, Chi; Kim, Tae-Il; Song, Taeseup; Shigeta, Kazuyo; Kang, Sen; Dagdeviren, Canan; Petrov, Ivan; Braun, Paul V; Huang, Yonggang; Paik, Ungyu; Rogers, John A

2013-01-01

An important trend in electronics involves the development of materials, mechanical designs and manufacturing strategies that enable the use of unconventional substrates, such as polymer films, metal foils, paper sheets or rubber slabs. The last possibility is particularly challenging because the systems must accommodate not only bending but also stretching. Although several approaches are available for the electronics, a persistent difficulty is in power supplies that have similar mechanical properties, to allow their co-integration with the electronics. Here we introduce a set of materials and design concepts for a rechargeable lithium ion battery technology that exploits thin, low modulus silicone elastomers as substrates, with a segmented design in the active materials, and unusual 'self-similar' interconnect structures between them. The result enables reversible levels of stretchability up to 300%, while maintaining capacity densities of ~1.1 mAh cm(-2). Stretchable wireless power transmission systems provide the means to charge these types of batteries, without direct physical contact.

Constructing hierarchical submicrotubes from interconnected TiO2 nanocrystals for high reversible capacity and long-life lithium-ion batteries

NASA Astrophysics Data System (ADS)

Xin, Ling; Liu, Yong; Li, Baojun; Zhou, Xiang; Shen, Hui; Zhao, Wenxia; Liang, Chaolun

2014-03-01

Here, we report a facile hydrothermal approach for synthesizing anatase TiO2 hierarchical mesoporous submicrotubes (ATHMSs) with the aid of long-chain polymer as soft template. The TiO2 nanocrystals, with sizes of 6-8 nm, are well interconnected with each other to build tubular architectures with diameters of 0.3-1.5 μm and lengths of 10-25 μm. Such highly porous structures give rise to very large specific surface area of 201.9 m2 g-1 and 136.8 m2 g-1 for the as-prepared and annealed samples, respectively. By using structurally stable ATHMSs as anode materials for lithium-ion batteries, they exhibited high reversible capacity, long cycling life and excellent cycling stability. Even after 1000 cycles, such ATHMS electrodes retained a reversible discharge capacity as high as 150 mAh g-1 at the current density of 1700 mA g-1, maintaining 92% of the initial discharge capacity (163 mAh g-1).

Structure determination and characterization of two rare-earth molybdenum borate compounds: LnMoBO(6) (Ln = La, Ce).

PubMed

Zhao, Dan; Cheng, Wen-Dan; Zhang, Hao; Hang, Shu-Ping; Fang, Ming

2008-07-28

The structural, optical, and electronic properties of two rare-earth molybdenum borate compounds, LnMoBO(6) (Ln = La, Ce), have been investigated by means of single-crystal X-ray diffraction, elemental analyses, and spectral measurements, as well as calculations of energy band structures, density of states, and optical response functions by the density functional method. The title compounds, which crystallize in monoclinic space group P2(1)/c, possess a similar network of interconnected [Ce(2)(MoO(4))(2)](2+) chains and [BO(2)](-) wavy chains. Novel 1D molybdenum oxide chains are contained in their three-dimensional (3D) networks. The calculated results of crystal energy band structure by the density functional theory (DFT) method show that the solid-state compound LaMoBO(6) is a semiconductor with indirect band gaps.

Parameter analysis on the ultrasonic TSV-filling process and electrochemical characters

NASA Astrophysics Data System (ADS)

Wang, Fuliang; Ren, Xinyu; Wang, Yan; Zeng, Peng; Zhou, Zhaohua; Xiao, Hongbin; Zhu, Wenhui

2017-10-01

As one of the key technologies in 3D packaging, through silicon via (TSV) interconnection technology has become a focus recently. In this paper, an electrodeposition method for TSV filling with the assistance of ultrasound and additives are introduced. Two important parameters i.e. current density and ultrasonic power are studied for TSV filling process and electrochemical properties. It is found that ultrasound can improve the quality of TSV-filling and change the TSV-filling mode. The experimental results also indicate that the filling rate enhances more significantly with decreasing current density under ultrasonic conditions than under silent conditions. In addition, according to the voltammetry curve, the increase of ultrasonic power can significantly increase the current density of cupric reduction, and decrease the thickness of diffusion layer. So that the reduction speed of copper ions is accelerated, resulting in a higher TSV-filling rate.

Head-disk Interface Study for Heat Assisted Magnetic Recording (HAMR) and Plasmonic Nanolithography for Patterned Media

NASA Astrophysics Data System (ADS)

Xiong, Shaomin

The magnetic storage areal density keeps increasing every year, and magnetic recording-based hard disk drives provide a very cheap and effective solution to the ever increasing demand for data storage. Heat assisted magnetic recording (HAMR) and bit patterned media have been proposed to increase the magnetic storage density beyond 1 Tb/in2. In HAMR systems, high magnetic anisotropy materials are recommended to break the superparamagnetic limit for further scaling down the size of magnetic bits. However, the current magnetic transducers are not able to generate strong enough field to switch the magnetic orientations of the high magnetic anisotropy material so the data writing is not able to be achieved. So thermal heating has to be applied to reduce the coercivity for the magnetic writing. To provide the heating, a laser is focused using a near field transducer (NFT) to locally heat a ~(25 nm)2 spot on the magnetic disk to the Curie temperature, which is ~ 400 C-600°C, to assist in the data writing process. But this high temperature working condition is a great challenge for the traditional head-disk interface (HDI). The disk lubricant can be depleted by evaporation or decomposition. The protective carbon overcoat can be graphitized or oxidized. The surface quality, such as its roughness, can be changed as well. The NFT structure is also vulnerable to degradation under the large number of thermal load cycles. The changes of the HDI under the thermal conditions could significantly reduce the robustness and reliability of the HAMR products. In bit patterned media systems, instead of using the continuous magnetic granular material, physically isolated magnetic islands are used to store data. The size of the magnetic islands should be about or less than 25 nm in order to achieve the storage areal density beyond 1 Tb/in2. However, the manufacture of the patterned media disks is a great challenge for the current optical lithography technology. Alternative lithography solutions, such as nanoimprint, plasmonic nanolithography, could be potential candidates for the fabrication of patterned disks. This dissertation focuses mainly on: (1) an experimental study of the HDI under HAMR conditions (2) exploration of a plasmonic nanolithography technology. In this work, an experimental HAMR testbed (named "Cal stage") is developed to study different aspects of HAMR systems, including the tribological head-disk interface and heat transfer in the head-disk gap. A temperature calibration method based on magnetization decay is proposed to obtain the relationship between the laser power input and temperature increase on the disk. Furthermore, lubricant depletion tests under various laser heating conditions are performed. The effects of laser heating repetitions, laser power and disk speeds on lubricant depletion are discussed. Lubricant depletion under the optical focused laser beam heating and the NFT heating are compared, revealing that thermal gradient plays an important role for lubricant depletion. Lubricant reflow behavior under various conditions is also studied, and a power law dependency of lubricant depletion on laser heating repetitions is obtained from the experimental results. A conductive-AFM system is developed to measure the electrical properties of thin carbon films. The conductivity or resistivity is a good parameter for characterizing the sp2/sp3 components of the carbon films. Different heating modes are applied to study the degradation of the carbon films, including temperature-controlled electric heater heating, focused laser beam heating and NFT heating. It is revealed that the temperature and heating duration significantly affect the degradation of the carbon films. Surface reflectivity and roughness are changed under certain heating conditions. The failure of the NFT structure during slider flying is investigated using our in-house fabricated sliders. In order to extend the lifetime of the NFT, a two-stage heating scheme is proposed and a numerical simulation has verified the feasibility of this new scheme. The heat dissipated around the NFT structure causes a thermal protrusion. There is a chance for contact to occur between the protrusion and disk which can result in a failure of the NFT. A design method to combine both TFC protrusion and laser induced NFT protrusion is proposed to reduce the fly-height modulation and chance of head-disk contact. Finally, an integrated plasmonic nanolithography machine is introduced to fabricate the master template for patterned disks. The plasmonic nanolithography machine uses a flying slider with a plasmonic lens to expose the thermal resist on a spinning wafer. The system design, optimization and integration have been performed over the past few years. Several sub-systems of the plasmonic nanolithography machine, such as the radial and circumferential direction position control, high speed pattern generation, are presented in this work. The lithography results are shown as well.

Interconnections Seam Study | Energy Analysis | NREL

Science.gov Websites

Interconnections Seam Study Interconnections Seam Study Through the Interconnections Seam Study between the interconnections. This study will quantify the value of strengthening the connections (or Peer Review - Interconnections Seam Study to learn more. Our Approach To quantify the value of

Obsessive-compulsive personality disorder features and response to behavioral therapy for insomnia among patients with hypnotic-dependent insomnia.

PubMed

Petrov, Megan E; Emert, Sarah E; Lichstein, Kenneth L

2018-06-05

To compare therapeutic response to behavioral therapy for insomnia (BT-I) among hypnotic-dependent insomnia (HDI) patients with and without Cluster C personality disorders. Twenty-three adults with HDI (17 females), aged between 33 and 68 (M = 53; SD = 9.9) were included in the study. Participants completed a personality disorder assessment (baseline), as well as sleep diaries, polysomnography (PSG), and an insomnia severity assessment (baseline, posttreatment, and one-year follow-up). Treatment consisted of eight weeks of individual BT-I and gradual hypnotic medication withdrawal. Multilevel mixed-effects linear regression models examined the interaction between study visit and Cluster C personality disorders status on treatment response to BT-I. Obsessive-compulsive personality disorder (OCPD) was the most prevalent of the Cluster C personality disorders with 38% (n = 8) of participants meeting criteria. There were no significant treatment differences by OCPD status across time as measured by sleep diaries and insomnia severity status. However, there were significant treatment differences by OCPD status by one-year follow-up on PSG outcomes, indicating that patients with OCPD status had shorter and more disrupted sleep than patients without OCPD status. Based on self-reported sleep measures, patients with insomnia and features of OCPD responded equivalently to BT-I at one-year follow-up compared to patients without features of OCPD. However, polysomnography outcomes indicated objective sleep deteriorated in these patients, which may suggest greater vulnerability to relapse.

Simple vs. Complex Carbohydrate Dietary Patterns and the Global Overweight and Obesity Pandemic.

PubMed

Ferretti, Fabrizio; Mariani, Michele

2017-10-04

Nowadays, obesity and being overweight are among the major global health concerns. Many, diet-related diseases impose high tangible and intangible costs, and threaten the sustainability of health-care systems worldwide. In this study, we model, at the macroeconomic level, the impact of energy intake from different types of carbohydrates on the population's BMI (body mass index). We proceed in three steps. First, we develop a framework to analyse both the consumption choices between simple and complex carbohydrates and the effects of these choices on people health conditions. Second, we collect figures for 185 countries (over the period 2012-2014) regarding the shares of simple (sugar and sweetener) and complex (cereal) carbohydrates in each country's total dietary energy supply. Third, we use regression techniques to: (1) estimate the impact of these shares on the country's prevalence of obesity and being overweight; (2) compute for each country an indicator of dietary pattern based on the ratio between simple and complex carbohydrates, weighted by their estimated effects on the prevalence of obesity and being overweight; and (3) measure the elasticity of the prevalence of obesity and being overweight with respect to changes in both carbohydrate dietary pattern and income per capita. We find that unhealthy eating habits and the associated prevalence of excessive body fat accumulation tend to behave as a 'normal good' in low, medium- and high-HDI (Human Development Index) countries, but as an 'inferior good' in very high-HDI countries.

Therapeutic Risk and Benefits of Concomitantly Using Herbal Medicines and Conventional Medicines: From the Perspectives of Evidence Based on Randomized Controlled Trials and Clinical Risk Management

PubMed Central

Zhang, Xiu-lai; Chen, Meng; Zhu, Ling-ling

2017-01-01

Despite increased awareness of the potential of herb-drug interactions (HDIs), the lack of rigorous clinical evidence regarding the significance provides a challenge for clinicians and consumers to make rational decisions about the safe combination of herbal and conventional medicines. This review addressed HDIs based on evidence from randomized controlled trials (RCTs). Literature was identified by performing a PubMed search till January 2017. Risk description and clinical risk management were described. Among 74 finally included RCTs, 17 RCTs (22.97%) simply addressed pharmacodynamic HDIs. Fifty-seven RCTs (77.03%) investigated pharmacokinetic HDIs and twenty-eight of them showed potential or actual clinical relevance. The extent of an HDI may be associated with the factors such as pharmacogenomics, dose of active ingredients in herbs, time course of interaction, characteristics of the object drugs (e.g., administration routes and pharmacokinetic profiles), modification of herbal prescription compositions, and coexistence of inducers and inhibitors. Clinical professionals should enhance risk management on HDIs such as increasing awareness of potential changes in therapeutic risk and benefits, inquiring patients about all currently used conventional medicines and herbal medicines and supplements, automatically detecting highly substantial significant HDI by computerized reminder system, selecting the alternatives, adjusting dose, reviewing the appropriateness of physician orders, educating patients to monitor for drug-interaction symptoms, and paying attention to follow-up visit and consultation. PMID:28491115

Disaster preparedness networks in rural Midwest communities: Organizational roles, collaborations, and support for older residents.

PubMed

Ashida, Sato; Zhu, Xi; Robinson, Erin L; Schroer, Audrey

2018-05-17

This study investigated the roles and interconnections among community organizations belonging to local disaster coalitions in Midwest in supporting older residents. Representatives from 44 organizations participated in one-time survey. Most were non-profit (68%) or federal/state/local government agencies (23%). The analyses of 761 relationships showed stronger collaborations in assessment (average strength=2.88 on a 5-point scale), emergency response (2.72), and planning (2.61); and weaker collaborations in co-sponsoring programs (1.71) and supporting older residents (2.03). The extent of collaboration (network density) to support older adults was also low. Coalitions may enhance network density and centralization by developing sub-committee structure and strengthening existing collaborations.

A wide range real-time synchronous demodulation system for the dispersion interferometer on HL-2M

NASA Astrophysics Data System (ADS)

Wu, Tongyu; Zhang, Wei; Yin, Zejie

2017-09-01

A real-time synchronous demodulation system has been developed for the dispersion interferometer on a HL-2M tokamak. The system is based on the phase extraction method which uses a ratio of modulation amplitudes. A high-performance field programmable gate array with pipeline process capabilities is used to realize the real time synchronous demodulation algorithm. A fringe jump correction algorithm is applied to follow the fast density changes of the plasma. By using the Peripheral Component Interconnect Express protocol, the electronics can perform real-time density feedback with a temporal resolution of 100 ns. Some experimental results presented show that the electronics can obtain a wide measurement range of 2.28 × 1022 m-2 with high precision.

Parallel Optical Random Access Memory (PORAM)

NASA Technical Reports Server (NTRS)

Alphonse, G. A.

1989-01-01

It is shown that the need to minimize component count, power and size, and to maximize packing density require a parallel optical random access memory to be designed in a two-level hierarchy: a modular level and an interconnect level. Three module designs are proposed, in the order of research and development requirements. The first uses state-of-the-art components, including individually addressed laser diode arrays, acousto-optic (AO) deflectors and magneto-optic (MO) storage medium, aimed at moderate size, moderate power, and high packing density. The next design level uses an electron-trapping (ET) medium to reduce optical power requirements. The third design uses a beam-steering grating surface emitter (GSE) array to reduce size further and minimize the number of components.

Chalcogenide Materials Fabrication and Initial Characterization for Reconfigurable Interconnect Technology

DTIC Science & Technology

2006-10-01

The oxide has lower values of (n, k) than Ge2Sb2Te5, and can be etched by hydrofluoric acid or water. No change in the optical constants of the...system. Spin densities were estimated by comparison with a standard sample ( weak pitch). Details are available elsewhere [15]. Both x-ray and x...121Sb and 123Sb are 588A = G, G and G, G, respectively [17]. The simulation yields broad features near 2300 and 4400 G, which are too weak in

Cavitation transition in the energy landscape: Distinct tensile yielding behavior in strongly and weakly attractive systems.

PubMed

Altabet, Y Elia; Fenley, Andreia L; Stillinger, Frank H; Debenedetti, Pablo G

2018-03-21

Particles with cohesive interactions display a tensile instability in the energy landscape at the Sastry density ρ S . The signature of this tensile limit is a minimum in the landscape equation of state, the pressure-density relationship of inherent structures sampled along a liquid isotherm. Our previous work [Y. E. Altabet, F. H. Stillinger, and P. G. Debenedetti, J. Chem. Phys. 145, 211905 (2016)] revisited the phenomenology of Sastry behavior and found that the evolution of the landscape equation of state with system size for particles with interactions typical of molecular liquids indicates the presence of an athermal first-order phase transition between homogeneous and fractured inherent structures, the latter containing several large voids. Here, we study how this tensile limit manifests itself for different interparticle cohesive strengths and identify two distinct regimes. Particles with sufficiently strong cohesion display an athermal first-order phase transition, consistent with our prior characterization. Weak cohesion also displays a tensile instability. However, the landscape equation of state for this regime is independent of system size, suggesting the absence of a first-order phase transition. An analysis of the voids suggests that yielding in the energy landscape of weakly cohesive systems is associated with the emergence of a highly interconnected network of small voids. While strongly cohesive systems transition from exclusively homogeneous to exclusively fractured configurations at ρ S in the thermodynamic limit, this interconnected network develops gradually, starting at ρ S , even at infinite system size.

Interconnected Cavernous Structure of Bacterial Fruiting Bodies

DOE PAGES

Harvey, Cameron W.; Du, Huijing; Xu, Zhiliang; ...

2012-12-27

The formation of spore-filled fruiting bodies by myxobacteria is a fascinating case of multicelular self-organization by bacteria. The organization of Myxococcus xanthus into fruiting bodies has long been studied not only as an important example of collective motion of bacteria, but also as a simplified model for developmental morphogenesis. Sporulation within the nascent fruiting body requires signaling between moving cells in order that the rod-shaped self-propelled cells differentiate into spores at the appropriate time. Probing the three-dimensional structure of myxobacteria fruiting bodies has previously presented a challenge due to Imitations at different imaging methods. A new technique using Infrared Opticalmore » Coherence Tomography (OCT) revealed previously unknown details of the Internal structure of M. xanthus fruiting bodies consisting of interconnected pockets of relative nigh and low spore density regions. Here, to make sense of the experimentally observed structure, modeling and computer simulations were used to test a hypothesized mechanism that could produce high density pockets of spores. The mechanism consists of self-propelled cells aligning with each other and signaling by end-to-end contact to coordinate the process of differentiation resulting in a pattern of clusters observed in the experiment. The Integration of novel OCT experimental techniques with computational simulations can provide new insight Into the mechanisms that can give rise to the pattern formation seen In other biological systems such as dlctyostelids, social amoeba known to form multicellular aggregates observed as slugs under starvation conditions.« less

Hierarchically porous nitrogen-doped carbon derived from the activation of agriculture waste by potassium hydroxide and urea for high-performance supercapacitors

NASA Astrophysics Data System (ADS)

Zou, Kaixiang; Deng, Yuanfu; Chen, Juping; Qian, Yunqian; Yang, Yuewang; Li, Yingwei; Chen, Guohua

2018-02-01

Nitrogen-doped carbon with an ultra-high specific surface area and a hierarchically interconnected porous structure is synthesized in large scale from a green route, that is, the activation of bagasse via a one-step method using KOH and urea. KOH and urea play a synergistic effect for the enhancement of the specific surface area and the modification of pore size of the as-prepared material. Benefiting from the multiple synergistic roles originated from an ultra-high specific area (2905.4 m2 g-1), a high porous volume (2.05 mL g-1 with 75.6 vol% micropores, which is an ideal proportion of micropores for obtaining high specific capacitance), a suitable nitrogen content (2.63 wt%), and partial graphitization, the hierarchically interconnected porous N-doped carbon exhibits an excellent electrochemical performance with a high specific capacitance (350.8, 301.9, and 259.5 F g-1 at 1.0 A g-1 in acidic, alkaline, and neutral electrolytes, respectively), superior rate capability and excellent cycling stability (almost no capacitance loss up to 5000 cycles). Furthermore, the symmetric device assembled by this material achieves high energy densities of 39.1 and 23.5 Wh kg-1 at power densities of 1.0 and 20 kW kg-1, respectively, and exhibits an excellent long-term cycling stability (with capacitance retention above 95.0% after 10 000 cycles).

Cavitation transition in the energy landscape: Distinct tensile yielding behavior in strongly and weakly attractive systems

NASA Astrophysics Data System (ADS)

Altabet, Y. Elia; Fenley, Andreia L.; Stillinger, Frank H.; Debenedetti, Pablo G.

2018-03-01

Particles with cohesive interactions display a tensile instability in the energy landscape at the Sastry density ρS. The signature of this tensile limit is a minimum in the landscape equation of state, the pressure-density relationship of inherent structures sampled along a liquid isotherm. Our previous work [Y. E. Altabet, F. H. Stillinger, and P. G. Debenedetti, J. Chem. Phys. 145, 211905 (2016)] revisited the phenomenology of Sastry behavior and found that the evolution of the landscape equation of state with system size for particles with interactions typical of molecular liquids indicates the presence of an athermal first-order phase transition between homogeneous and fractured inherent structures, the latter containing several large voids. Here, we study how this tensile limit manifests itself for different interparticle cohesive strengths and identify two distinct regimes. Particles with sufficiently strong cohesion display an athermal first-order phase transition, consistent with our prior characterization. Weak cohesion also displays a tensile instability. However, the landscape equation of state for this regime is independent of system size, suggesting the absence of a first-order phase transition. An analysis of the voids suggests that yielding in the energy landscape of weakly cohesive systems is associated with the emergence of a highly interconnected network of small voids. While strongly cohesive systems transition from exclusively homogeneous to exclusively fractured configurations at ρS in the thermodynamic limit, this interconnected network develops gradually, starting at ρS, even at infinite system size.

Wireless Interconnects for Intra-chip & Inter-chip Transmission

NASA Astrophysics Data System (ADS)

Narde, Rounak Singh

With the emergence of Internet of Things and information revolution, the demand of high performance computing systems is increasing. The copper interconnects inside the computing chips have evolved into a sophisticated network of interconnects known as Network on Chip (NoC) comprising of routers, switches, repeaters, just like computer networks. When network on chip is implemented on a large scale like in Multicore Multichip (MCMC) systems for High Performance Computing (HPC) systems, length of interconnects increases and so are the problems like power dissipation, interconnect delays, clock synchronization and electrical noise. In this thesis, wireless interconnects are chosen as the substitute for wired copper interconnects. Wireless interconnects offer easy integration with CMOS fabrication and chip packaging. Using wireless interconnects working at unlicensed mm-wave band (57-64GHz), high data rate of Gbps can be achieved. This thesis presents study of transmission between zigzag antennas as wireless interconnects for Multichip multicores (MCMC) systems and 3D IC. For MCMC systems, a four-chips 16-cores model is analyzed with only four wireless interconnects in three configurations with different antenna orientations and locations. Return loss and transmission coefficients are simulated in ANSYS HFSS. Moreover, wireless interconnects are designed, fabricated and tested on a 6'' silicon wafer with resistivity of 55O-cm using a basic standard CMOS process. Wireless interconnect are designed to work at 30GHz using ANSYS HFSS. The fabricated antennas are resonating around 20GHz with a return loss of less than -10dB. The transmission coefficients between antenna pair within a 20mm x 20mm silicon die is found to be varying between -45dB to -55dB. Furthermore, wireless interconnect approach is extended for 3D IC. Wireless interconnects are implemented as zigzag antenna. This thesis extends the work of analyzing the wireless interconnects in 3D IC with different configurations of antenna orientations and coolants. The return loss and transmission coefficients are simulated using ANSYS HFSS.

The Highly Robust Electrical Interconnects and Ultrasensitive Biosensors Based on Embedded Carbon Nanotube Arrays

NASA Technical Reports Server (NTRS)

Li, Jun; Cassell, Alan; Koehne, Jessica; Chen, Hua; Ng, Hou Tee; Ye, Qi; Stevens, Ramsey; Han, Jie; Meyyappan, M.

2003-01-01

We report on our recent breakthroughs in two different applications using well-aligned carbon nanotube (CNT) arrays on Si chips, including (1) a novel processing solution for highly robust electrical interconnects in integrated circuit manufacturing, and (2) the development of ultrasensitive electrochemical DNA sensors. Both of them rely on the invention of a bottom-up fabrication scheme which includes six steps, including: (a) lithographic patterning, (b) depositing bottom conducting contacts, (c) depositing metal catalysts, (d) CNT growth by plasma enhanced chemical vapor deposition (PECVD), (e) dielectric gap-filling, and (f) chemical mechanical polishing (CMP). Such processes produce a stable planarized surface with only the open end of CNTs exposed, whch can be further processed or modified for different applications. By depositing patterned top contacts, the CNT can serve as vertical interconnects between the two conducting layers. This method is fundamentally different fiom current damascene processes and avoids problems associated with etching and filling of high aspect ratio holes at nanoscales. In addition, multiwalled CNTs (MWCNTs) are highly robust and can carry a current density of 10(exp 9) A/square centimeters without degradation. It has great potential to help extending the current Si technology. The embedded MWCNT array without the top contact layer can be also used as a nanoelectrode array in electrochemical biosensors. The cell time-constant and sensitivity can be dramatically improved. By functionalizing the tube ends with specific oligonucleotide probes, specific DNA targets can be detected with electrochemical methods down to subattomoles.

Comprehensive evaluation of global energy interconnection development index

NASA Astrophysics Data System (ADS)

Liu, Lin; Zhang, Yi

2018-04-01

Under the background of building global energy interconnection and realizing green and low-carbon development, this article constructed the global energy interconnection development index system which based on the current situation of global energy interconnection development. Through using the entropy method for the weight analysis of global energy interconnection development index, and then using gray correlation method to analyze the selected countries, this article got the global energy interconnection development index ranking and level classification.

Review of Interconnection Practices and Costs in the Western States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bird, Lori A; Flores-Espino, Francisco; Volpi, Christina M

The objective of this report is to evaluate the nature of barriers to interconnecting distributed PV, assess costs of interconnection, and compare interconnection practices across various states in the Western Interconnection. The report addresses practices for interconnecting both residential and commercial-scale PV systems to the distribution system. This study is part of a larger, joint project between the Western Interstate Energy Board (WIEB) and the National Renewable Energy Laboratory (NREL), funded by the U.S. Department of Energy, to examine barriers to distributed PV in the 11 states wholly within the Western Interconnection.

Power interconnection projects in the ASEAN region: Definitional-mission report No. 1. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-06-01

In response to a request from the Association of Southeast Asian Nations (ASEAN), the U.S. Trade and Development Program (TDP) conducted a definitional mission to evaluate the prospects of TDP funding for five Power Interconnection Projects in the ASEAN region. These projects included: Batam-Singapore Interconnection; Sumatera-Peninsular Malaysia Interconnection; Sarawak-West Kalimantan Interconnection; Sarawak-Brunei-Sabah Interconnection; and Java-Sumatera Interconnection. Based on a review of the proposed scopes of work for the projects and the discussions in the field, the report summarizes the technical details and the costs of implementation for the projects.

Collisionless effects on beam-return current systems in solar flares

NASA Technical Reports Server (NTRS)

Vlahos, L.; Rowland, H. L.

1985-01-01

A theoretical study of the beam-return current system (BRCS) in solar flares shows that the precipitating electrons modify the way in which the return current (RC) is carried by the background plasma. In particular it is found that the RC is not carried by the bulk of the electrons but by a small number of high-velocity electrons. For beam/plasma densities exceeding approximately 0.001, this can reduce the effects of collisions and heating by the RC. For higher-density beams, where the RC could be unstable to current-driven instabilities, the effects of strong turbulence anomalous resistivity prevent the appearance of such instabilities. The main conclusion is that the BRCS is interconnected, and that the beam-generated strong turbulence determines how the RC is carried.

Synthesis of ultrathin mesoporous NiCo2O4 nanosheets on carbon fiber paper as integrated high-performance electrodes for supercapacitors

NASA Astrophysics Data System (ADS)

Deng, Fangze; Yu, Lin; Cheng, Gao; Lin, Ting; Sun, Ming; Ye, Fei; Li, Yongfeng

2014-04-01

Two-dimensional ultrathin mesoporous NiCo2O4 nanosheets on carbon fiber paper (CFP) are synthesized through a facile solvothermal method combined with a post thermal treatment. The well interconnected ultrathin NiCo2O4 nanosheets directly grown on the carbon nanofibers could allow for easy diffusion of the electrolyte, shorten the transport path of ion and electron and accommodate the strain during cycling. As a result, superior pseudocapacitive performance is achieved with large specific capacitance of 999 F g-1 at a high current density of 20 A g-1. The capacitance loss is 15.6% after 3000 cycles at a current density of 10 A g-1, displaying good cycle ability and high rate capability.

Preparation of sintered foam materials by alkali-activated coal fly ash.

PubMed

Zhao, Yelong; Ye, Junwei; Lu, Xiaobin; Liu, Mangang; Lin, Yuan; Gong, Weitao; Ning, Guiling

2010-02-15

Coal fly ash from coal fired power stations is a potential raw material for the production of ceramic tiles, bricks and blocks. Previous works have demonstrated that coal fly ash consists mainly of glassy spheres that are relatively resistant to reaction. An objective of this research was to investigate the effect of alkali on the preparation process of the foam material. Moreover, the influence of foam dosage on the water absorption, apparent density and compressive strength was evaluated. The experimental results showed that homogenous microstructures of interconnected pores could be obtained by adding 13 wt.% foaming agent at 1050 degrees C, leading to foams presenting water absorption, apparent density and compressive strength values of about 126.5%, 0.414 g/cm(3), 6.76 MPa, respectively.

Variable residence time vortex combustor

DOEpatents

Melconian, Jerry O.

1987-01-01

A variable residence time vortex combustor including a primary combustion chamber for containing a combustion vortex, and a plurality of louvres peripherally disposed about the primary combustion chamber and longitudinally distributed along its primary axis. The louvres are inclined to impel air about the primary combustion chamber to cool its interior surfaces and to impel air inwardly to assist in driving the combustion vortex in a first rotational direction and to feed combustion in the primary combustion chamber. The vortex combustor also includes a second combustion chamber having a secondary zone and a narrowed waist region in the primary combustion chamber interconnecting the output of the primary combustion chamber with the secondary zone for passing only lower density particles and trapping higher density particles in the combustion vortex in the primary combustion chamber for substantial combustion.

Electric and Hydraulic Properties of Carbon Felt Immersed in Different Dielectric Liquids

PubMed Central

Kossenko, Alexey; Lugovskoy, Svetlana

2018-01-01

Electroconductive carbon felt (CF) material, having a permeable structure and significant electroconductive surface, is widely used for electrodes in numerous electrochemical applications such as redox flow batteries, fuel cells, electrochemical desalination apparatus, etc. The internal structure of CF is composed of different lengths of carbon filaments bonded together. This structure creates a large number of stochastically oriented and stochastically linked channels that have different lengths and cross sections. Therefore, the CF hydraulic permeability is similar to that of porous media and is determined by the internal empty volume and arrangement of carbon fibers. Its electroconductivity is ensured by the conductivity of the carbon filaments and by the electrical interconnections between fibers. Both of these properties (permeability and electrical conductivity) are extremely important for the efficient functioning of electrochemical devices. However, their influences counter each other during CF compressing. Increasing the stress on a felt element provides supplementary electrical contacts of carbon filaments, which lead to improved electrical conductivity. Thus, the active surface of the felt electrode is increased, which also boosts redox chemical reactions. On the other hand, compressed felt possesses reduced hydrodynamic permeability as a result of a diminished free volume of porous media and intrinsic channels. This causes increasing hydrodynamic expenditures of electrolyte pumping through electrodes and lessened cell (battery) efficiency. The designer of specific electrochemical systems has to take into account both of these properties when selecting the optimal construction for a cell. This article presents the results of measurements and novel approximating expressions of electrical and hydraulic characteristics of a CF during its compression. Since electrical conductivity plays a determining role in providing electrochemical reactions, it was measured in dry conditions and when the CF was immersed in several non-conductive liquids. The choice of such liquids prevented side effects of electrolyte ionic conductivity impact on electrical resistivity of the CF. This gave an opportunity to determine the influences of dielectric parameters of electrolytes to increase or decrease the density of interconnectivity of carbon fibers either between themselves or between them and electrodes. The experiments showed the influence of liquid permittivity on the conductivity of CF, probably by changing the density of fiber interconnections inside the felt. PMID:29690636

Electric and Hydraulic Properties of Carbon Felt Immersed in Different Dielectric Liquids.

PubMed

Kossenko, Alexey; Lugovskoy, Svetlana; Averbukh, Moshe

2018-04-23

Electroconductive carbon felt (CF) material, having a permeable structure and significant electroconductive surface, is widely used for electrodes in numerous electrochemical applications such as redox flow batteries, fuel cells, electrochemical desalination apparatus, etc. The internal structure of CF is composed of different lengths of carbon filaments bonded together. This structure creates a large number of stochastically oriented and stochastically linked channels that have different lengths and cross sections. Therefore, the CF hydraulic permeability is similar to that of porous media and is determined by the internal empty volume and arrangement of carbon fibers. Its electroconductivity is ensured by the conductivity of the carbon filaments and by the electrical interconnections between fibers. Both of these properties (permeability and electrical conductivity) are extremely important for the efficient functioning of electrochemical devices. However, their influences counter each other during CF compressing. Increasing the stress on a felt element provides supplementary electrical contacts of carbon filaments, which lead to improved electrical conductivity. Thus, the active surface of the felt electrode is increased, which also boosts redox chemical reactions. On the other hand, compressed felt possesses reduced hydrodynamic permeability as a result of a diminished free volume of porous media and intrinsic channels. This causes increasing hydrodynamic expenditures of electrolyte pumping through electrodes and lessened cell (battery) efficiency. The designer of specific electrochemical systems has to take into account both of these properties when selecting the optimal construction for a cell. This article presents the results of measurements and novel approximating expressions of electrical and hydraulic characteristics of a CF during its compression. Since electrical conductivity plays a determining role in providing electrochemical reactions, it was measured in dry conditions and when the CF was immersed in several non-conductive liquids. The choice of such liquids prevented side effects of electrolyte ionic conductivity impact on electrical resistivity of the CF. This gave an opportunity to determine the influences of dielectric parameters of electrolytes to increase or decrease the density of interconnectivity of carbon fibers either between themselves or between them and electrodes. The experiments showed the influence of liquid permittivity on the conductivity of CF, probably by changing the density of fiber interconnections inside the felt.

Reliability of CCGA 1152 and CCGA 1272 Interconnect Packages for Extreme Thermal Environments

NASA Technical Reports Server (NTRS)

Ramesham, Rajeshuni

2013-01-01

Ceramic column grid array (CCGA) packages have been increasing in use based on their advantages of high interconnect density, very good thermal and electrical performance, and compatibility with standard surface-mount packaging assembly processes. CCGA packages are used in space applications such as in logics and microprocessor functions, telecommunications, flight avionics, and payload electronics. As these packages tend to have less solder joint strain relief than leaded packages, the reliability of CCGA packages is very important for short- and long-term space missions. Certain planetary satellites require operations of thermally uncontrolled hardware under extremely cold and hot temperatures with large diurnal temperature change from day to night. The planetary protection requires the hardware to be baked at +125 C for 72 hours to kill microbugs to avoid any biological contamination, especially for sample return missions. Therefore, the present CCGA package reliability research study has encompassed the temperature range of 185 to +125 C to cover various NASA deep space missions. Advanced 1152 and 1272 CCGA packaging interconnects technology test hardware objects have been subjected to ex treme temperature thermal cycles from 185 to +125 C. X-ray inspections of CCGA packages have been made before thermal cycling. No anomalous behavior and process problems were observed in the x-ray images. The change in resistance of the daisy-chained CCGA interconnects was measured as a function of increasing number of thermal cycles. Electrical continuity measurements of daisy chains have shown no anomalies, even until 596 thermal cycles. Optical inspections of hardware have shown a significant fatigue for CCGA 1152 packages over CCGA 1272 packages. No catastrophic failures have been observed yet in the results. Process qualification and assembly are required to optimize the CCGA assembly processes. Optical inspections of CCGA boards have been made after 258 and 596 thermal cycles. Corner columns have started showing significant fatigue per optical inspection results.

One-step electrodeposited nickel cobalt sulfide nanosheet arrays for high-performance asymmetric supercapacitors.

PubMed

Chen, Wei; Xia, Chuan; Alshareef, Husam N

2014-09-23

A facile one-step electrodeposition method is developed to prepare ternary nickel cobalt sulfide interconnected nanosheet arrays on conductive carbon substrates as electrodes for supercapacitors, resulting in exceptional energy storage performance. Taking advantages of the highly conductive, mesoporous nature of the nanosheets and open framework of the three-dimensional nanoarchitectures, the ternary sulfide electrodes exhibit high specific capacitance (1418 F g(-1) at 5 A g(-1) and 1285 F g(-1) at 100 A g(-1)) with excellent rate capability. An asymmetric supercapacitor fabricated by the ternary sulfide nanosheet arrays as positive electrode and porous graphene film as negative electrode demonstrates outstanding electrochemical performance for practical energy storage applications. Our asymmetric supercapacitors show a high energy density of 60 Wh kg(-1) at a power density of 1.8 kW kg(-1). Even when charging the cell within 4.5 s, the energy density is still as high as 33 Wh kg(-1) at an outstanding power density of 28.8 kW kg(-1) with robust long-term cycling stability up to 50,000 cycles.

Constructing Hierarchical Tectorum-like α-Fe2 O3 /PPy Nanoarrays on Carbon Cloth for Solid-State Asymmetric Supercapacitors.

PubMed

Wang, Libin; Yang, Huiling; Liu, Xiaoxiao; Zeng, Rui; Li, Ming; Huang, Yunhui; Hu, Xianluo

2017-01-19

The design of complex heterostructured electrode materials that deliver superior electrochemical performances to their individual counterparts has stimulated intensive research on configuring supercapacitors with high energy and power densities. Herein we fabricate hierarchical tectorum-like α-Fe 2 O 3 /polypyrrole (PPy) nanoarrays (T-Fe 2 O 3 /PPy NAs). The 3D, and interconnected T-Fe 2 O 3 /PPy NAs are successfully grown on conductive carbon cloth through an easy self-sacrificing template and in situ vapor-phase polymerization route under mild conditions. The electrode made of the T-Fe 2 O 3 /PPy NAs exhibits a high areal capacitance of 382.4 mF cm -2 at a current density of 0.5 mA cm -2 and excellent reversibility. The solid-state asymmetric supercapacitor consisting of T-Fe 2 O 3 /PPy NAs and MnO 2 electrodes achieves a high energy density of 0.22 mWh cm -3 at a power density of 165.6 mW cm -3 . © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

700 F hybrid capacitors cells composed of activated carbon and Li4Ti5O12 microspheres with ultra-long cycle life

NASA Astrophysics Data System (ADS)

Ruan, Dianbo; Kim, Myeong-Seong; Yang, Bin; Qin, Jun; Kim, Kwang-Bum; Lee, Sang-Hyun; Liu, Qiuxiang; Tan, Lei; Qiao, Zhijun

2017-10-01

To address the large-scale application demands of high energy density, high power density, and long cycle lifetime, 700-F hybrid capacitor pouch cells have been prepared, comprising ∼240-μm-thick activated carbon cathodes, and ∼60-μm-thick Li4Ti5O12 anodes. Microspherical Li4Ti5O12 (M-LTO) synthesized by spray-drying features 200-400 nm primary particles and interconnected nanopore structures. M-LTO half-cells exhibits high specific capacities (175 mAhh g-1), good rate capabilities (148 mAhh g-1 at 20 C), and ultra-long cycling stabilities (90% specific capacity retention after 10,000 cycles). In addition, the obtained hybrid capacitors comprising activated carbon (AC) and M-LTO shows excellent cell performances, achieving a maximum energy density of 51.65 Wh kg-1, a maximum power density of 2466 W kg-1, and ∼92% capacitance retention after 10,000 cycles, thus meeting the demands for large-scale applications such as trolleybuses.

Microwave synthesis of three-dimensional nickel cobalt sulfide nanosheets grown on nickel foam for high-performance asymmetric supercapacitors.

PubMed

Wang, Fangping; Li, Guifang; Zheng, Jinfeng; Ma, Jing; Yang, Caixia; Wang, Qizhao

2018-04-15

A facile and cost-effective microwave method is developed to prepare ternary nickel cobalt sulfide (NiCo 2 S 4 ) interconnected nanosheet arrays on nickel foam (NF). When acting as an electrochemical supercapacitor electrode material, the as-prepared NiCo 2 S 4 /NF shows a high specific capacitance of 1502 F g -1 at a current density of 1 A g -1 , and outstanding cycling stability of 91% capacitance retention after 8000 cycles. In addition, a asymmetric supercapacitor (ASC) is composed of NiCo 2 S 4 /NF as positive electrode and activated carbon as negative electrode, which exhibits a high energy density of 34.7 W h kg -1 at a power density of 750 W kg -1 and long-term cyclic stability (83.7% capacity retention after 8000 cycles). Even at a high power density of 15 kW kg -1 , it still remains an energy density of 17.9 W h kg -1 , which is able to light up a light-emitting diode. These findings provide a new and facile approach to fabricate high-performance electrode for supercapacitors. Copyright © 2018 Elsevier Inc. All rights reserved.

Reconfigurable optical interconnections via dynamic computer-generated holograms

NASA Technical Reports Server (NTRS)

Liu, Hua-Kuang (Inventor); Zhou, Shaomin (Inventor)

1994-01-01

A system is proposed for optically providing one-to-many irregular interconnections, and strength-adjustable many-to-many irregular interconnections which may be provided with strengths (weights) w(sub ij) using multiple laser beams which address multiple holograms and means for combining the beams modified by the holograms to form multiple interconnections, such as a cross-bar switching network. The optical means for interconnection is based on entering a series of complex computer-generated holograms on an electrically addressed spatial light modulator for real-time reconfigurations, thus providing flexibility for interconnection networks for largescale practical use. By employing multiple sources and holograms, the number of interconnection patterns achieved is increased greatly.

Flexible interconnects for fuel cell stacks

DOEpatents

Lenz, David J.; Chung, Brandon W.; Pham, Ai Quoc

2004-11-09

An interconnect that facilitates electrical connection and mechanical support with minimal mechanical stress for fuel cell stacks. The interconnects are flexible and provide mechanically robust fuel cell stacks with higher stack performance at lower cost. The flexible interconnects replace the prior rigid rib interconnects with flexible "fingers" or contact pads which will accommodate the imperfect flatness of the ceramic fuel cells. Also, the mechanical stress of stacked fuel cells will be smaller due to the flexibility of the fingers. The interconnects can be one-sided or double-sided.

Elimination of avoidable blindness due to cataract: Where do we prioritize and how should we monitor this decade?

PubMed Central

Murthy, Gudlavalleti V S; John, Neena; Shamanna, Bindiganavale R; Pant, Hira B

2012-01-01

Background: In the final push toward the elimination of avoidable blindness, cataract occupies a position of eminence for the success of the Right to Sight initiative. Aims: Review existing situation and assess what monitoring indicators may be useful to chart progress towards attaining the goals of Vision 2020. Settings and Design: Review of published papers from low and middle income countries since 2000. Materials and Methods: Published population-based data on prevalence of cataract blindness/visual impairment were accessed and prevalence of cataract blindness/visual impairment computed, where not reported. Data on prevalence of cataract blindness, cataract surgical coverage at different visual acuity cut offs, surgical outcomes, and prevalence of cataract surgery were analyzed. Scatter plots were used to look at relationships of some variables, with Human Development Index (HDI) rank. Available data on Cataract Surgical Rate (CSR) was plotted against prevalence of cataract surgery reported from surveys. Results: Worse HDI Ranks were associated with higher prevalence of cataract blindness. Most studies showed that a significant proportion of the blind were covered by surgery, while a fifth showed that a significant proportion, were operated before they went blind. A good visual outcome after surgery was positively correlated with higher surgical coverage. CSR was positively correlated with cataract surgical coverage. Conclusions: Cataract surgical coverage is increasing in most countries at vision <3/60 and visual outcomes after cataract surgery are improving. Establishing population-based surveillance of cataract surgical need and performance is a strong monitoring tool and will help program planners immensely. PMID:22944756

An FTIR investigation of isocyanate skin absorption using in vitro guinea pig skin.

PubMed

Bello, Dhimiter; Smith, Thomas J; Woskie, Susan R; Streicher, Robert P; Boeniger, Mark F; Redlich, Carrie A; Liu, Youcheng

2006-05-01

Isocyanates may cause contact dermatitis, sensitization and asthma. Dermal exposure to aliphatic and aromatic isocyanates can occur in various exposure settings. The fate of isocyanates on skin is an important unanswered question. Do they react and bind to the outer layer of skin or do they penetrate through the epidermis as unreacted compounds? Knowing the kinetics of these processes is important in developing dermal exposure sampling or decontamination strategies, as well as understanding potential health implications such exposure may have. In this paper the residence time of model isocyanates on hairless guinea pig skin was investigated in vitro using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry. Model isocyanates tested were octyl isocyanate, polymeric hexamethylene diisocyanate isocyanurate (pHDI), polymeric isophorone diisocyanate isocyanurate (pIPDI) and methylenediphenyl diisocyanate (MDI). Isocyanates in ethyl acetate (30 microL) were spiked directly on the skin to give 0.2-1.8 micromol NCO cm(-2) (NCO = -N=C=O), and absorbance of the isocyanate group and other chemical groups of the molecule were monitored over time. The ATR-FTIR findings showed that polymeric isocyanates pHDI and pIPDI may remain on the skin as unreacted species for many hours, with only 15-20% of the total isocyanate group disappearing in one hour, while smaller compounds octyl isocyanate and MDI rapidly disappear from the skin surface (80+% in 30 min). Isocyanates most likely leave the skin surface by diffusion predominantly, with minimal reaction with surface proteins. The significance of these findings and their implications for dermal exposure sampling and isocyanate skin decontamination are discussed.

Study of risk factors for gastric cancer by populational databases analysis

PubMed Central

Ferrari, Fangio; Reis, Marco Antonio Moura

2013-01-01

AIM: To study the association between the incidence of gastric cancer and populational exposure to risk/protective factors through an analysis of international databases. METHODS: Open-access global databases concerning the incidence of gastric cancer and its risk/protective factors were identified through an extensive search on the Web. As its distribution was neither normal nor symmetric, the cancer incidence of each country was categorized according to ranges of percentile distribution. The association of each risk/protective factor with exposure was measured between the extreme ranges of the incidence of gastric cancer (under the 25th percentile and above the 75th percentile) by the use of the Mann-Whitney test, considering a significance level of 0.05. RESULTS: A variable amount of data omission was observed among all of the factors under study. A weak or nonexistent correlation between the incidence of gastric cancer and the study variables was shown by a visual analysis of scatterplot dispersion. In contrast, an analysis of categorized incidence revealed that the countries with the highest human development index (HDI) values had the highest rates of obesity in males and the highest consumption of alcohol, tobacco, fruits, vegetables and meat, which were associated with higher incidences of gastric cancer. There was no significant difference for the risk factors of obesity in females and fish consumption. CONCLUSION: Higher HDI values, coupled with a higher prevalence of male obesity and a higher per capita consumption of alcohol, tobacco, fruits, vegetables and meat, are associated with a higher incidence of gastric cancer based on an analysis of populational global data. PMID:24409066

Assessing Patient Participation in Health Policy Decision-Making in Cyprus

PubMed Central

Souliotis, Kyriakos; Agapidaki, Eirini; Peppou, Lily Evangelia; Tzavara, Chara; Samoutis, George; Theodorou, Mamas

2016-01-01

Although the importance of patient participation in the design and evaluation of health programs and services is well-documented, there is scarcity of research with regard to patient association (PA) participation in health policy decision-making processes. To this end, the present study aimed to validate further a previously developed instrument as well as to investigate the degree of PA participation in health policy decision-making in Cyprus. A convenient sample of 114 patients-members of patients associations took part in the study. Participants were recruited from an umbrella organization, the Pancyprian Federation of Patient Associations and Friends (PFPA). PA participation in health policy decision-making was assessed with the Health Democracy Index (HDI), an original 8-item tool. To explore its psychometric properties, Cronbach α was computed as regards to its internal consistency, while its convergent validity was tested against a self-rated question enquiring about the degree of PA participation in health policy decision-making. The findings revealed that the HDI has good internal consistency and convergent validity. Furthermore, PAs were found to participate more in consultations in health-related organizations and the Ministry of Health (MoH) as well as in reforms or crucial decisions in health policy. Lower levels were documented with regard to participation in hospital boards, ethics committees in clinical trials and health technology assessment (HTA) procedures. Overall, PA participation levels were found to be lower than the mid-point of the scale. Targeted interventions aiming to facilitate patients’ involvement in health policy decision-making processes and to increase its impact are greatly needed in Cyprus. PMID:27694659

Rheumatic heart disease across the Western Pacific: not just a Pacific Island problem.

PubMed

Abouzeid, Marian; Katzenellenbogen, Judith; Wyber, Rosemary; Watkins, David; Johnson, Timothy David; Carapetis, Jonathan

2017-01-01

Some of the highest recorded rheumatic heart disease (RHD) prevalence and mortality rates are from the World Health Organization's Western Pacific Region (WPR). RHD burden has been well documented in much of the WPR subregion of Oceania, but less is known about RHD outside the Pacific Islands and Australasia. We aimed to review RHD burden in WPR outside Oceania to identify countries with high RHD burden and those with contemporary data gaps. We searched the peer-reviewed literature for English-language primary studies published between 1980 and April 2017 that reported RHD prevalence or mortality in the 13 WPR countries/areas outside Oceania, and Taiwan. We also searched for official government reports and health indicator documents. Results were synthesised narratively and reported stratified by 2015 Human Development Index (HDI) level. 30 peer-reviewed publications fulfilling inclusion criteria were identified, representing nine countries/areas. RHD prevalence and mortality have fallen in association with economic development, particularly in very high HDI countries. In several countries that have undergone recent economic development, RHD persists particularly among older populations. In poorer WPR countries there is a persistent RHD burden, including in young populations. Some countries had no available data. Although RHD burden has declined in many high-resource settings across the WPR, in several poorer countries, the impact of RHD appears to continue. Elsewhere, insufficient contemporary data make it difficult to gauge the current status of RHD burden and control. Concerted efforts are needed to fill information gaps and implement action to address this avoidable disease.

Water-energy-food nexus for adopting sustainable development goals in Asia

NASA Astrophysics Data System (ADS)

Taniguchi, M.

2016-12-01

Water, energy, and food are the most essential and fundamental resources for human well-beings, a sustainable society, and global sustainability. These are inextricably linked, and there are complex synergies and tradeoffs among the three resources. More issues arise and attention must be paid when it comes to the Water-Energy-Food (WEF) Nexus. Lack of integrated research between a nexus and policy implementation is the most concerning. The United Nations Sustainable Development Goals (SDGs) aim to end poverty, protect the planet, and ensure prosperity for all, and are scheduled to be achieved by 2030. Of the 17 SDGs, Goal 2, 6 and 7 are directly related to food, water, and energy sectors. However, there are no integrated SDGs related to the Water-Energy-Food Nexus. Two different directions of nexus research exist in developing and industrialized worlds, and synthesis of both are needed. Developing countries are striving to increase their Human Development Index (HDI) while keeping Ecological Footprints, including Nexus Footprint, low. On the other hand, industrialized countries are targeting to maintain their high HDI and reduce their Ecological Footprints. Both are challenging tasks under the restrictions of planetary boundaries (limited nature) and doughnut economy (limited society). In this study, WEF Nexus research in Asian countries, including developing and industrialized countries, demonstrates the different types of nexus approaches to achieve SDGs through renewable energy, agriculture and aquaculture as food, and water management in Monsoon and semi-arid Asia. Mutual learning between the two types of nexus approaches can be made in the Asian area.

Impact of novel histone deacetylase inhibitors, CHAP31 and FR901228 (FK228), on adenovirus-mediated transgene expression.

PubMed

Taura, Kojiro; Yamamoto, Yuzo; Nakajima, Akio; Hata, Koichiro; Uchinami, Hiroshi; Yonezawa, Kei; Hatano, Etsuro; Nishino, Norikazu; Yamaoka, Yoshio

2004-05-01

Histone deacetylase inhibitors (HDIs) are known to enhance adenovirus (Ad)-mediated transgene expression. Recently, novel HDIs, including cyclic hydroxamic-acid-containing peptide 31 (CHAP31) and FR901228 (FK228), have been developed. The effects of these two novel HDIs on Ad-transduced or endogenous gene expression were investigated. Acetylation of core histones and the expression of the coxsackie and adenovirus receptor (CAR) in HDI-treated cells were examined using Western blot and a quantitative reverse transcription polymerase chain reaction (TaqMan RT-PCR), respectively. Their in vivo effect on adenoviral gene expression was investigated in BALB/c mice. Both compounds enhanced and prolonged Ad-mediated beta-galactosidase expression more effectively than did trichostatin A, a classic HDI. The same effect was observed in Ad-transduced heat shock protein 72 (HSP72), but not in hyperthermia-induced endogenous expression of HSP72, suggesting that the effect is specific for transduced gene expression. Hyperacetylation of core histones induced by HDIs was considered responsible for the augmentative effects of gene expression. Intravenous administration of either CHAP31 or FR901228 enhanced beta-galactosidase expression in mice infected with AdLacZ. CHAP31 and FR901228 amplified Ad-mediated transgene expression. The enhancement of transgene expression by HDIs may result in fewer vector doses for necessary gene expression, helping to alleviate disadvantages caused by Ad vectors. This could be a useful tool in overcoming current limitations of gene therapy using adenovirus vectors. Copyright 2004 John Wiley & Sons, Ltd.

Adherence to a healthy diet in relation to cardiovascular incidence and risk markers: evidence from the Caerphilly Prospective Study.

PubMed

Mertens, Elly; Markey, Oonagh; Geleijnse, Johanna M; Lovegrove, Julie A; Givens, D Ian

2018-04-01

Epidemiological findings indicate that higher adherence to a healthy diet may lower cardiovascular disease (CVD) risk. The present study aimed to investigate whether adherence to a healthy diet, assessed by the Healthy Diet Indicator (HDI), Dietary Approaches to Stop Hypertension (DASH) score, and Alternative Healthy Eating Index 2010 (AHEI-2010), was associated with CVD incidence and risk markers. Included in the present analyses were data from 1867 middle-aged men, aged 56.7 ± 4.5 years at baseline, recruited into the Caerphilly Prospective Study. Adherence to a healthy diet was examined in relation to CVD, coronary heart disease (CHD), and stroke incidence (Cox regression), and risk markers (linear regression) with adjustment for relevant confounders. The DASH score was inversely associated with CVD [hazard ratio (HR) 0.81; 95% confidence interval (CI) 0.66, 0.99], and stroke (HR 0.61; 95% CI 0.42, 0.88) incidence, but not with CHD after an average of 16.6 year follow-up, and with diastolic blood pressure, after 12 year follow-up. The AHEI-2010 was inversely associated with stroke (HR 0.66; 95% CI 0.42, 0.88) incidence, aortic pulse wave velocity, and C-reactive protein. The HDI was not associated with any single outcome. Higher DASH and AHEI-2010 scores were associated with lower CVD and stroke risk, and favourable cardiovascular health outcomes, suggesting that encouraging middle-aged men to comply with the dietary recommendations for a healthy diet may have important implications for future vascular disease and population health.

[Gender development inequalities epidemiology in Spain (1990-2000)].

PubMed

Carrasco-Portiño, Mercedes; Ruiz-Cantero, María Teresa; Gil-González, Diana; Díaz, Carlos Alvarez-Dardet; Torrubiano-Domínguez, Jordi

2008-01-01

Gender is an important health determinant for public health policies. This study describes the changes in gender development inequalities in Spain and its autonomous regions from 1990 to 2000. An ecological study using the Human Development Index (HDI) and the Gender Development Index (GDI) was done. IDG both men and women was analysed according to indexes of education, income and life expectancy at birth. Although the GDI has had an increase of 5,05% in the 90 s, 51,5% of the population was located above the global GDI of Spain in 1990, moreover this number decreased to 46,3% in 2000. Gender inequalities have been reduced both at national and regional levels. The regions with the lowest increase were Asturias (3.37%), Cantabria (3.68%) and Baleares Islands (3.71%). The regions with the highest increase were Madrid (6,46%) and Extremadura (6,75%). All the autonomous regions showed a number of GDI lower than the value of HDI. Both sexes achieved similar increase in life expectancy (Men: 5% and Women: 4%). An unequal variation was detected according to the autonomous region (Basque Country; Men: 7% and Women: 3%; Madrid; Men:8% and Women:5%). Women have improved their educational level in comparison to men (Men: 3% and Women: 6%). In the 90 s, men obtained more income than women, but women improved their situation three times more than men. Inequalities in Human Development analysed by gender have been reduced in the 90 s in Spain. However, the improvement of education, income and life expectancy occurred only in some autonomous regions. This situation shows the differences among Spanish autonomous regions.

A hybrid method for quantifying China's nitrogen footprint during urbanisation from 1990 to 2009.

PubMed

Cui, Shenghui; Shi, Yalan; Malik, Arunima; Lenzen, Manfred; Gao, Bing; Huang, Wei

2016-12-01

In this study, we devise a national nitrogen footprint method to evaluate the life cycle nitrogen flows through the national economy of China from 1990 to 2009. To this end, we build a hybrid method based on two well-established techniques, namely material flow analysis (MFA) and input-output analysis (IOA). This integration allows for the evaluation of the effects of international trade and interdependencies among economic sectors. Our results suggest that China's nitrogen footprint (NF) has increased from 30.3Teragrams (Tg) in 1990 to 54.0Tg in 2009, whereas the NF per capita has increased from 25.9 to 39.5kgN/yr. Relationship between the world NF per capita and human development index (HDI) appears to show an inverted U curve, whilst China shows an increase both in NF per capita and HDI. We find that an increase in China's NF is largely associated with high levels of urbanisation. Although the energy NF (E_NF) has increased more drastically than the food NF (F_NF), the latter still dominates China's total NNF, with proportions of 91% in 1990 and 82% in 2009. Taking international trade into account, our results demonstrate that China was a net exporter of F_NF, whilst a net importer of E_NF over this time period. There are many measures considered to reduce China's nitrogen footprint, including improvements in N use efficiency of food systems, transformation of meat-based diets and optimisation of China's economic structure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing Patient Organization Participation in Health Policy: A Comparative Study in France and Italy

PubMed Central

Souliotis, Kyriakos; Agapidaki, Eirini; Evangelia Peppou, Lily; Tzavara, Chara; Varvaras, Dimitrios; Buonomo, Oreste Claudio; Debiais, Dominique; Hasurdjiev, Stanimir; Sarkozy, Francois

2018-01-01

Background: Even though there are many patient organizations across Europe, their role in impacting health policy decisions and reforms has not been well documented. In line with this, the present study endeavours to fill this gap in the international literature. To this end, it aims to validate further a previously developed instrument (the Health Democracy Index - HDI) measuring patient organization participation in health policy decision-making. In addition, by utilizing this tool, it aims to provide a snapshot of the degree and impact of cancer patient organization (CPO) participation in Italy and France. Methods: A convenient sample of 188 members of CPOs participated in the study (95 respondents from 10 CPOs in Italy and 93 from 12 CPOs in France). Participants completed online a self-reported questionnaire, encompassing the 9-item index and questions enquiring about the type and impact of participation in various facets of health policy decisionmaking. The psychometric properties of the scale were explored by performing factor analysis (construct validity) and by computing Cronbach α (internal consistency). Results: Findings indicate that the index has good internal consistency and the construct it taps is unidimensional. The degree and impact of CPO participation in health policy decision-making were found to be low in both countries; however in Italy they were comparatively lower than in France. Conclusion: In conclusion, the HDI can be effectively used in international policy and research contexts. CPOs participation is low in Italy and France and concerted efforts should be made on upgrading their role in health policy decision-making. PMID:29325402

Solar Interconnection Standards & Policies

EPA Pesticide Factsheets

The Toolbox for Renewable Energy Project Development's Solar Interconnection Standards and Policies page provides an overview of the interconnection policy and standards, as well as, resources to help you understand the interconnection policy landscape.

Electrode and interconnect for miniature fuel cells using direct methanol feed

NASA Technical Reports Server (NTRS)

Narayanan, Sekharipuram R. (Inventor); Valdez, Thomas I. (Inventor); Clara, Filiberto (Inventor)

2004-01-01

An improved system for interconnects in a fuel cell. In one embodiment, the membranes are located in parallel with one another, and current flow between them is facilitated by interconnects. In another embodiment, all of the current flow is through the interconnects which are located on the membranes. The interconnects are located between two electrodes.