Apprenticeship and Training Policy for Dental Laboratory Technicians.

ERIC Educational Resources Information Center

National Association of Dental Labs., Inc., Washington, DC.

The dental technician performs completely one or more specialized areas of the dental laboratory procedures required in the creation of a dental appliance. Policies of the 8000 hour apprenticeship program are explained in terms of qualifications, apprenticeship terms and agreement, ratio of apprentices to technicians, probationary period, credit…

Dental Training Films.

ERIC Educational Resources Information Center

Veterans Administration Medical Center, Washington, DC.

This dental training films catalog is organized into two sections. Section I is a category listing of the films by number and title, indexed according to generalized headings; categories are as follow: anatomy, articulator systems, complete dentures, dental assisting, dental laboratory technology, dental materials, dental office emergencies,…

Transforming Dental Technology Education: Skills, Knowledge, and Curricular Reform.

PubMed

Bobich, Anita M; Mitchell, Betty L

2017-09-01

Dental technology is one of the core allied dental health professions supporting the practice of dentistry. By definition, it is the art, science, and technologies that enable the design and fabrication of dental prostheses and/or corrective devices to restore natural teeth and supporting structures to fulfill a patient's physiological and esthetic needs. Dental technology educational programs are faced with serious challenges, including rapid changes in technology, inadequate funding for educational programs, and the need to develop curricula that reflect current industry needs. Better communications between dental technologists and practitioners are needed to gain greater recognition of the contribution that technologists make to patient health. Amid these challenges, the technology workforce is dedicated to providing patients with the best possible restorative dental prostheses. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Smart dental practice: capitalising on smart mobile technology.

PubMed

Plangger, K; Bredican, J; Mills, A J; Armstrong, J

2015-08-14

To keep pace with consumer adoption of smart mobile devices, such as smartphones and tablets, and the applications ('apps') developed for these devices, dental professionals should consider how this technology could be used to simultaneously improve both patient service experiences and dental practice management. Using U-Commerce as a theoretical lens, this article discusses the potential value of smart mobile technology to the dental practice context, with a particular focus on the unique and customisable capabilities of apps. To take full advantage of this technology, a process is outlined for identifying and designing bespoke dental apps that takes into account the unique advantages of these devices. Dental practices, with increasing financial and competitive pressures, may improve the efficiency and profitability of operations and better manage patients, employees and stakeholders by integrating smart mobile technology.

The gross anatomy laboratory: a novel venue for critical thinking and interdisciplinary teaching in dental education.

PubMed

Rowland, Kevin C; Joy, Anita

2015-03-01

Reports on the status of dental education have concluded that there is a need for various types of curricular reform, making recommendations that include better integration of basic, behavioral, and clinical sciences, increased case-based teaching, emphasis on student-driven learning, and creation of lifelong learners. Dental schools faced with decreasing contact hours, increasing teaching material, and technological advancements have experimented with alternate curricular strategies. At Southern Illinois University School of Dental Medicine, curricular changes have begun with a series of integrated biomedical sciences courses. During the process of planning and implementing the integrated courses, a novel venue-the gross anatomy laboratory-was used to introduce all Year 1 students to critical thinking, self-directed learning, and the scientific method. The venture included student-driven documentation of anatomical variations encountered in the laboratory using robust scientific methods, thorough literature review, and subsequent presentation of findings in peer review settings. Students responded positively, with over 75% agreeing the experience intellectually challenged them. This article describes the process of re-envisioning the gross anatomy laboratory as an effective venue for small group-based, student-driven projects that focus on key pedagogical concepts to encourage the development of lifelong learners.

Nanoparticle concentrations and composition in a dental office and dental laboratory: A pilot study on the influence of working procedures.

PubMed

Lang, Andreja; Ovsenik, Maja; Verdenik, Ivan; Remškar, Maja; Oblak, Čedomir

2018-05-01

During material treatment in dentistry particles of different size are released in the air. To examine the degree of particle exposure, air scanning to dental employees was performed by the Scanning Mobility Particle Sizer. The size, shape and chemical composition of particles collected with a low-pressure impactor were determined by scanning electronic microscopy and X-ray dispersive analysis. The average concentrations of nanoparticles during working periods in a clean dental laboratory (45,000-56,000 particles/cm 3 ), in an unclean dental laboratory (28,000-74,000 particles/cm 3 ), and in a dental office (21,000-50,000 particles/cm 3 ), were significantly higher compared to average concentrations during nonworking periods in the clean dental laboratory (11,000-24,000 particles/cm 3 ), unclean laboratory (14,000-40,000 particles/cm 3 ), and dental office (13,000-26,000 particles/cm 3 ). Peak concentration of nanoparticles in work-intensive periods were found significantly higher (up to 773,000 particles/cm 3 ), compared to the non-working periods (147,000 particles/cm 3 ) and work-less intensive periods (365,000 particles/cm 3 ). The highest mass concentration value ranged from 0.055-0.166 mg/m 3 . X-ray dispersive analysis confirmed the presence of carbon, potassium, oxygen, iron, aluminum, zinc, silicon, and phosphorus as integral elements of dental restorative materials in form of nanoparticle clusters, all smaller than 100 nm. We concluded that dental employees are exposed to nanoparticles in their working environment and are therefore potentially at risk for certain respiratory and systematic diseases.

Lidocaine Metabolism and Toxicity: A Laboratory Experiment for Dental Students.

ERIC Educational Resources Information Center

Kusek, J. C.

1980-01-01

A laboratory exercise for dental students is presented using a toxic dose of lidocaine in place of an anesthetic dose of pentobarbital. The use of lidocaine demonstrates its toxic and lethal actions and increases the relevance of the experience for dental students. (Author/MLW)

Using CAD/CAM technology to create a 10-unit zirconia fixed partial denture--a UTHSCSA dental school case report.

PubMed

Zimmermann, Richard; Seitz, Stefanie; Magness, Brent; Wieck, Blaine

2013-10-01

From diagnosis and treatment planning to the materials being used, technology is changing dentistry. New materials are providing dentists greater options for treatment, while technology is streamlining the workflow in the office and dental laboratory. Traditionally the creation of a long-span fixed partial denture was a labor intense project--from waxing up the prosthesis--to stacking of the porecelain. For larger frameworks, it was recommended for the dentist to bring in the patient in for a framework try-in. However, advances in both CAD/CAM technology and dental materials are revolutionizing the way dentistry is being done. The following describes the fabrication of a 10-unit full contour zirconia fixed partial denture completed in the pre-doctorate program at UTHSCSA Dental School.

Dental nursing education and the introduction of technology-assisted learning.

PubMed

Sheridan, C; Gorman, T; Claffey, N

2008-11-01

The aim of this paper is to explore the profile of dental nursing students in the National Dental Nurse Training Programme of Ireland and their adjustment to a technology-assisted learning environment. Evaluation by students of the course and their reactions to the course were analysed. Dental nurses must possess the skills and knowledge to proficiently function in the modern day dental surgery. The implementation of a dental nurse programme that is heavily reliant on technology has started to create a group of dental nurses equipped with basic skills to access and retrieve information over a lifetime. However, the transition to a technology-assisted learning environment including online learning activities requires adaptation and expertise by educators and students alike. Careful evaluation and stakeholder feedback is imperative in the creation and maintaining of a quality programme. In conclusion, the students in this study responded well to the transition to a technology-based learning environment. Furthermore, the findings of this study suggest that the use of an online environment is an effective and stimulating learning environment for the students of a dental nurse programme; however, familiarity skills and knowledge of information technology is a prerequisite for success.

Dental Laboratory Career Ladder (AFSC 4Y1X1)

DTIC Science & Technology

1994-08-01

analysis identified one job cluster and seven jobs: Base Dental Lab cluster, Orthodontic Appliance Fabricator job, Fixed Restoration Fabricator job, Crown...reline and repair, removable partial denture construction, crown and fixed partial denture construction, fabrication of orthodontic appliances, and...specialized prostheses. Preventive maintenance and safety precautions for dental laboratory equipment are also stressed . Entry into the career ladder

Technology is a critical game changer to the practice of dental hygiene.

PubMed

Gadbury-Amyot, Cynthia C

2014-06-01

Dental hygienists will need to embrace 21st century technology to adapt to workplace settings. To stay relevant in the workforce, dental hygienists need mastery of new skills and technologies. The purpose of this paper is to elucidate the vast array of technological advances impacting dental practice and the consequent implications for oral health care providers. New technologies have provided unparalleled opportunities for degree and career advancement for dental hygienists. Advances in science and technology are providing patients with better quality and more convenient oral health care. Dental hygienists need technological skills that enable them to fully utilize technology as a strategy for consultation with dentists and other health care professionals and for other purposes. Continuing education and life-long learning factor into preparing dental hygienists for 21st century technologies. With technological advances, less adaptive professionals could potentially see a decrease in demand for their services. Possessing a high level of knowledge of dentistry and dental hygiene does not ensure a position in the workforce. Knowledge of technologies and associated skills are required for quality patient care and career and personal growth. Copyright © 2014 Elsevier Inc. All rights reserved.

The future of dental devices is digital.

PubMed

van Noort, Richard

2012-01-01

Major changes are taking place in dental laboratories as a result of new digital technologies. Our aim is to provide an overview of these changes. In this article the reader will be introduced to the range of layered fabrication technologies and suggestions are made how these might be used in dentistry. Key publications in English from the past two decades are surveyed. The first digital revolution took place many years ago now with the production of dental restorations such as veneers, inlays, crowns and bridges using dental CAD-CAM systems and new improved systems appear on the market with great rapidity. The reducing cost of processing power will ensure that these developments will continue as exemplified by the recent introduction of a new range of digital intra-oral scanners. With regard to the manufacture of prostheses this is currently dominated by subtractive machining technology but it is inevitable that the additive processing routes of layered fabrication, such as FDM, SLA, SLM and inkjet printing, will start to have an impact. In principle there is no reason why the technology cannot be extended to all aspects of production of dental prostheses and include customized implants, full denture construction and orthodontic appliances. In fact anything that you might expect a dental laboratory to produce can be done digitally and potentially more consistently, quicker and at a reduced cost. Dental device manufacturing will experience a second revolution when layered fabrication techniques reach the point of being able to produce high quality dental prostheses. The challenge for the dental materials research community is to marry the technology with materials that are suitable for use in dentistry. This can potentially take dental materials research in a totally different direction. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Experience with virtual reality-based technology in teaching restorative dental procedures.

PubMed

Buchanan, Judith A

2004-12-01

This article reports on extensive experience with advanced simulation at the University of Pennsylvania, School of Dental Medicine (UPSDM). Virtual reality-based technology (VRBT) or advanced simulation is currently available for the instruction of dental students in preclinical restorative procedures. UPSDM was one of the first schools in the world to have extensive experience with VRBT technology using an advanced simulation unit (DentSim) from DenX, Ltd. UPSDM's experience consists of several years of research using control and experimental groups, employing students to participate in an investigative project, and using the units for remediation and a supplement to the preclinical laboratory. Currently, all first-year students (Class of 2007 and Class of 2008) are receiving most of their preparative operative training on the VRBT units. UPSDM started with one (beta) version unit in 1998, which was later updated and expanded first to four units and recently to fifteen units. This communication is presenting the studies that were of fundamental importance in making the decision to acquire fifteen units in 2003. The areas of main interest to the SDM concerning this technology were its use in teaching, refreshing, and remediating students in restorative procedures and its effectiveness as a teaching methodology in relation to time, efficiency, and faculty. Several studies with varying parameters were performed at various time points. The limited statistical analysis conducted was not conclusive for all measures, and in some cases the data only suggest areas of possible significance. This is due to the low number of students who could access the limited number of available units and the change of protocols in response to student and faculty input. Overall, the results do suggest, however, that students learn faster, arrive at the same level of performance, accomplish more practice procedures per hour, and request more evaluations per procedure or per hour than in our

Job Analysis Techniques for Restructuring Health Manpower Education and Training in the Navy Medical Department. Attachment 9. Laboratory QPCB Task Sort for Medical Laboratory Technology.

ERIC Educational Resources Information Center

Technomics, Inc., McLean, VA.

This publication is Attachment 9 of a set of 16 computer listed QPCB task sorts, by career level, for the entire Hospital Corps and Dental Technician fields. Statistical data are presented in tabular form for a detailed listing of job duties in medical laboratory technology. (BT)

Trends in dental and allied dental education.

PubMed

Neumann, Laura M

2004-09-01

Educational programs play an important role in preparing a qualified dental work force. This article reviews the current status and trends in dental, advanced dental and allied dental education programs in the United States and examines their impact on the dental work force. This analysis focuses on survey data collected by the American Dental Association during the past 10 to 15 years and compares recent patterns in applications, enrollment and graduation with previous trends. The numbers of educational programs, applicants, enrollees and graduates have increased in dentistry, dental hygiene and dental assisting, while dental laboratory technology has declined in all measures. The proportion of women in dentistry has increased, while the ethnic profile of dental and allied personnel has shown little change. Both the cost of dental education and student debt continue to increase. Despite increases in the number of educational programs and overall numbers of graduates from dental and allied dental education programs, the proportion of underrepresented groups still lags behind their representation in the overall population, and the number of allied personnel falls short of practice needs. Patterns in applications, enrollment and graduation are important determinants of the dental and allied dental work force. The cost and funding of education significantly affect the attractiveness of dental careers and the sustainability of educational programs and should be monitored carefully by the profession.

Intraoral laser welding: ultrastructural and mechanical analysis to compare laboratory laser and dental laser.

PubMed

Fornaini, Carlo; Passaretti, Francesca; Villa, Elena; Rocca, Jean-Paul; Merigo, Elisabetta; Vescovi, Paolo; Meleti, Marco; Manfredi, Maddalena; Nammour, Samir

2011-07-01

The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples.

Educational technology for millennial dental hygiene students: a survey of U.S. dental hygiene programs.

PubMed

Beebe, Catherine R R; Gurenlian, JoAnn R; Rogo, Ellen J

2014-06-01

A growing body of literature suggests that today's learners have changed and education must change as well since Millennial generation students expect technology to be used in their coursework. This study sought to determine what educational technology is being used in U.S. dental hygiene programs, what student and faculty perceptions are of the effectiveness of technology, and what barriers exist to implementing educational technology. A stratified random sample of 120 entry-level dental hygiene programs nationwide were invited to participate in a survey. Fourteen programs participated, yielding a pool of 415 potential individual participants; out of those, eighty-four student and thirty-eight faculty respondents were included in the analysis, a total of 122. Results were analyzed using descriptive statistics and a Mann-Whitney U test (p<0.05). Faculty and student respondents agreed on the effectiveness of educational technology in all areas except clickers and wikis. The faculty members tended to rate the effectiveness of educational technology higher than did the students. The greatest perceived barrier to implementing technology was technical difficulties. This study suggests that support services should be available to faculty and students to ensure successful implementation of technology. Dental hygiene educators have adopted many types of educational technology, but more data are needed to determine best practices.

Orthodontic soldering techniques: aspects of quality assurance in the dental laboratory.

PubMed

Heidemann, Jutta; Witt, Emil; Feeg, Martin; Werz, Rainer; Pieger, Klaus

2002-07-01

In Germany, the dental technician is required by the Medical Products Act (MPG) to produce workpieces of high safety and quality and to document these properties. Soldering continues to be the prevailing joining technique in the dental laboratory, although problems arise from the susceptibility to corrosion and the low strength of soldered joints. This study aimed to reveal sources of defects in dental laboratory workpieces in order to achieve optimization in terms of quality assurance. The joints were produced by various dental technicians using three different soldering techniques. These joining techniques were investigated for their quality and their corrosion properties during immersion in ferric chloride, orthodontic appliance cleanser, and artificial saliva. Observance of the soldering instructions by the dental technicians was checked. Corrosion attack was confirmed by scanning electron microscopy and by measuring the ion concentrations of copper, silver and zinc in the corrosive agents, using atomic emission spectroscopy with stimulation by inductively coupled plasma (ICP-AES analysis). Incomplete filling of the soldering gap, porosities resulting from the production process, poor corrosion properties, and in particular a high variability of the measured values point to insufficient reliability of two soldering techniques. Variations in quality were also detected among the technicians' modes of operation. The analyses confirm the need for quality assurance of soldering techniques and for increased support for alternative joining techniques such as laser welding in the future. The results of the studies on laser welding are presented in a separate publication.

Challenges to the introduction of new technologies to dental practice.

PubMed

Barnett, Michael L

2006-01-01

Despite promising breakthroughs in basic biomedical science, the pace at which innovative and disruptive new technologies are developed and introduced into dental practice lags behind that of medicine. This is largely a result of resource issues, both financial and human, as well as determinants in the marketplace. For example, the cost of developing a new drug or technology for dentistry and bringing it to market is often disproportionably high relative to the size of the dental market, thereby making it commercially unfeasible to pursue development. When a new technology is commercialized, its successful introduction can be facilitated by research that makes a compelling case for effective use. As our understanding of mechanisms of disease pathogenesis progresses, identifying compounds and technologies with applicability to both oral and systemic diseases could change the economics of dental product development and lead to additional innovative advances in our field.

Adoption and Use of Digital Technologies among General Dental Practitioners in the Netherlands

PubMed Central

van der Zande, Marieke M.; Gorter, Ronald C.; Aartman, Irene H. A.; Wismeijer, Daniel

2015-01-01

Objectives To investigate (1) the degree of digital technology adoption among general dental practitioners, and to assess (2) which personal and practice factors are associated with technology use. Methods A questionnaire was distributed among a stratified sample of 1000 general dental practitioners in the Netherlands, to measure the use of fifteen administrative, communicative, clinical and diagnostic technologies, as well as personal factors and dental practice characteristics. Results The response rate was 31.3%; 65.1% replied to the questionnaire on paper and 34.9% online. Each specific digital technology was used by between 93.2% and 6.8% of the dentists. Administrative technologies were generally used by more dentists than clinical technologies. Dentists had adopted an average number of 6.3±2.3 technologies. 22.5% were low technology users (0 to 4 technologies), 46.2% were intermediate technology users (5 to 7 technologies) and 31.3% were high technology users (8 to12 technologies). High technology users more frequently had a specialization (p<0.001), were younger on average (p=0.024), and worked more hours per week (p=0.003) than low technology users, and invested more hours per year in professional activities (p=0.026) than intermediate technology users. High technology use was also more common for dentists working in practices with a higher average number of patients per year (p<0.001), with more dentists working in the practice (p<0.001) and with more staff (p<0.001). Conclusion With few exceptions, all dentists use some or a substantial number of digital technologies. Technology use is associated with various patterns of person-specific factors, and is higher when working in larger dental practices. The findings provide insight into the current state of digital technology adoption in dental practices. Further exploration why some dentists are more reluctant to adopt technologies than others is valuable for the dental profession’s agility in adjusting

Understanding dental CAD/CAM for restorations--dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines.

PubMed

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.

Respiratory Findings in Dental Laboratory Technicians in Rasht (North of Iran)

PubMed Central

Shakiba, Maryam; Nejad, Azita Tangestani; Massahnia, Sara; Shiari, Ali

2011-01-01

Background There are several occupations that can expose people to some air pollutants. Dental technicians are exposed to inorganic dust and chemical vapors when making dental prosthesis that can put them at risk for respiratory problems. This study was performed to assess respiratory dysfunction in a group of dental technicians Materials and Methods This was a cross-sectional study designed to ascertain the prevalence of respiratory disorders in dental laboratory technicians in Rasht, a city located in north of Iran. A Structured questionnaire was adapted according to the European Community Respiratory Health Survey questionnaire and used to elicit information regarding sociodemographic characteristics and medical status of the study participants. The ventilation status, protective measures and direct exposure to materials in the laboratories were directly observed by the observers and subjects underwent respiratory tests and chest x-ray. Results The mean age of dental technicians was 31.31 yrs (range 18-56 years) and 83% were males with a mean dental work experience of 9.04 years. In 54.8% of cases, the work environment did not have air conditioning system. The most common signs and symptoms were cough (38.1%) and wheezing (16.7%). There was a significant correlation between smoking and respiratory signs. Restrictive airway pattern and air trapping were two prevalent findings which were observed in 85.7% and 33.3% of the subjects. Cigarette smoking had a negative effect on FEV1, FEF25%-75%, and TLC causing a significant reduction in all three parameters (p < 0.05). The most prevalent finding was interstitial opacity which was observed in 10 individuals (23.8%). This finding was not significantly associated with age, gender, cigarette smoking, or daily work hours. However, there was a significant statistical association between work experience and interstitial opacity. Conclusion The prevalence of respiratory dysfunction and chest x-ray findings were high as in

Teaching with technology: learning outcomes for a combined dental and dental hygiene online hybrid oral histology course.

PubMed

Gadbury-Amyot, Cynthia C; Singh, Amul H; Overman, Pamela R

2013-06-01

Among the challenges leaders in dental and allied dental education have faced in recent years is a shortage of well-qualified faculty members, especially in some specialty areas of dentistry. One proposed solution has been the use of technology. At the University of Missouri-Kansas City School of Dentistry, the departure of a faculty member who taught the highly specialized content in oral histology and embryology provided the opportunity to implement distance delivery of that course. The course is taught once a year to a combined group of dental and dental hygiene students. Previous to spring semester of 2009, the course was taught using traditional face-to-face, in-class lectures and multiple-choice examinations. During the spring semesters of 2009, 2010, and 2011, the course was taught using synchronous and asynchronous distance delivery technology. Outcomes for these courses (including course grades and performance on the National Board Dental Examination Part I) were compared to those from the 2006, 2007, and 2008 courses. Students participating in the online hybrid course were also given an author-designed survey, and the perceptions of the faculty member who made the transition from teaching the course in a traditional face-to-face format to teaching in an online hybrid format were solicited. Overall, student and faculty perceptions and student outcomes and course reviews have been positive. The results of this study can provide guidance to those seeking to use technology as one method of curricular delivery.

Dental students' uptake of mobile technologies.

PubMed

Khatoon, B; Hill, K B; Walmsley, A D

2014-06-01

The aim of this study was to understand how new mobile technologies, such as smartphones and laptops, are used by dental students. A questionnaire was distributed to undergraduate dental students from years 1 to 4, at the University of Birmingham Dental School. Questionnaires were completed between February and April 2013. Two hundred and seventy questionnaires were completed. Laptops 55% (145) and smartphones 34% (88) were the most popular choice of device for connecting to the net and searching information. Laptops were preferred in first and second year. Students in year 3 preferred mobile phones, and by year 4 the use of mobile phones and laptops was similar. The top two application ideas chosen by students as the most useful on their smart phones were a dictionary for dental education (56%) and multiple choice questions (50%). Students who chose smartphones as their first choice or second choice of device strongly agreed that having the Internet on their smartphones had a positive impact on their dental education (55%). With laptops (48%), students preferred to be at home when using them while for smartphones (31%) they used them anywhere with a connection. E-mail (47%) and social networks (44%) were the top two Internet communication tools used most on laptops. Instant messaging was popular on smartphones (17%). Depending on the year in the course, laptops and smartphones are the most popular choice of device and desktop computers are the least popular. Applications on smartphones are very popular and instant messaging is an upcoming form of communication for students.

A Review of Emerging Technologies for the Detection and Diagnosis of Dental Caries

DTIC Science & Technology

2016-06-01

of Dental Research . 83:39-42. Featherstone JDB. (2008). Dental caries: a dynamic disease process. Australian Dental Journal . 53:286-291... Research Naval Postgraduate Dental School Objectives:  to address emerging technologies presently available to aid in the detection and... research of dental caries in young children, the term early childhood caries was proposed by the Centers for Disease Control and Prevention in 1994 to

Improving the competency of dental hygiene students in detecting dental restorations using quantitative light-induced fluorescence technology.

PubMed

Oh, Hye-Young; Jung, Hoi-In; Lee, Jeong-Woo; de Jong, Elbert de Josselin; Kim, Baek-Il

2017-03-01

The purpose of this study was to determine the usefulness of a quantitative light-induced fluorescence (QLF) technology in detecting dental restorations by comparing the detection ability of dental hygiene students between using conventional visual inspection alone and visual inspection combined with QLF technology. The subjects of this study comprised 92 dental hygiene students. The students assigned to the control group only used white-light images to visually assess the mouth environment, while those in the experimental group additionally used fluorescence images. Using the test results of an experienced inspector as a reference value, the agreement between the reference value and the evaluation results of the students in the experimental and control groups was evaluated using Cohen's kappa and the percentage agreement. The subjects were then classified into groups covering three percentage ranges according to the score distribution and agreement values of the three groups were compared. The percentage agreement was calculated according to the type of dental restorations. The mean kappa value was significantly higher in the experimental group than the control group (0.70 vs 0.60, p<0.001), as was the percentage agreement (80.06% vs 72.64%, p<0.001). The agreement rate when using QLF technology increased by 8% more in the middle and bottom percentage groups than in the top percentage group (p<0.001). The agreement rate also varied with the type of restoration, being significantly higher for a sound tooth or tooth-colored restoration in the experimental group (p<0.001). Combining QLF technology with conventional visual inspections could improve the ability to detect dental restorations and distinguish sound teeth from aesthetic restorations. Copyright © 2016 Elsevier B.V. All rights reserved.

Dental scanning in CAD/CAM technologies: laser beams

NASA Astrophysics Data System (ADS)

Sinescu, Cosmin; Negrutiu, Meda; Faur, Nicolae; Negru, Radu; Romînu, Mihai; Cozarov, Dalibor

2008-02-01

Scanning, also called digitizing, is the process of gathering the requisite data from an object. Many different technologies are used to collect three dimensional data. They range from mechanical and very slow, to radiation-based and highly-automated. Each technology has its advantages and disadvantages, and their applications and specifications overlap. The aims of this study are represented by establishing a viable method of digitally representing artifacts of dental casts, proposing a suitable scanner and post-processing software and obtaining 3D Models for the dental applications. The method is represented by the scanning procedure made by different scanners as the implicated materials. Scanners are the medium of data capture. 3D scanners aim to measure and record the relative distance between the object's surface and a known point in space. This geometric data is represented in the form of point cloud data. The contact and no contact scanners were presented. The results show that contact scanning procedures uses a touch probe to record the relative position of points on the objects' surface. This procedure is commonly used in Reverse engineering applications. Its merits are represented by efficiency for objects with low geometric surface detail. Disadvantages are represented by time consuming, this procedure being impractical for artifacts digitization. The non contact scanning procedure implies laser scanning (laser triangulation technology) and photogrammetry. As a conclusion it can be drawn that different types of dental structure needs different types of scanning procedures in order to obtain a competitive complex 3D virtual model that can be used in CAD/CAM technologies.

Self-reported oral health behavior and attitudes of dental and technology students in Lithuania.

PubMed

Pacauskiene, Ingrida M; Smailiene, Dalia; Siudikienė, Jolanta; Savanevskyte, Julija; Nedzelskiene, Irena

2014-01-01

The aim of the present study was to assess self-reported oral health habits, attitudes, lifestyle between the sample groups of preclinical and clinical dental and technology students in Lithuania using the Hiroshima University Dental Behavioral Inventory (HU-DBI), and to evaluate the impact of education on their behavior and self-reported oral health. A sample of 183 dental and 75 technology students at the Lithuanian University of Health Sciences, Medical Academy, Faculty of Odontology, and Kaunas University of Technology completed the Lithuanian version the HU-DBI questionnaire with 11 additional items. The data were analyzed using the "SPSS 19.0 for Windows" software package. The mean HU-DBI score of clinical final-year dentistry students was significantly higher (p=0.001) than the score of the preclinical group (6.81 (1.2) and 5.96 (1.5), respectively). The mean scores of both groups of dental students were significantly (p<0.05) higher than that of the technology group (5.37 (1.8)). Oral health behaviors and knowledge were superior in dental students. Dental education had a significant positive impact on the oral health and behavior improvement. The attitudes of the Lithuanian dental students should be further improved by initiating a comprehensive program that would emphasize the importance of oral hygiene before the clinical program starts.

Snack foods and dental caries. Investigations using laboratory animals.

PubMed

Grenby, T H

1990-05-05

The nation's eating habits are undergoing major transformation, with a swing away from traditional meals to a huge increase in snack consumption, but very little is known of the nutritional and dental implications of this change. The research project reported here evaluated a range of snack foods in caries-active laboratory animals, comparing them, as dietary ingredients, with noncariogenic and cariogenic (sugar) diets. The findings showed the very low cariogenicity of salted peanuts, followed by ready-salted and salt and vinegar crisps, extruded maize, mixed-starch and prefabricated/fried potato products, and cheese-filled puffs. Other varieties of crisps (cheese and onion and special shapes) proved to be more cariogenic, not far short of semi-sweet biscuits in some cases. It is concluded that the severity of the processing undergone by the snack foods and the nature of the flavouring agents with which they are coated can influence their dental properties.

Anatomical sciences: A foundation for a solid learning experience in dental technology and dental prosthetics.

PubMed

Bakr, Mahmoud M; Thompson, C Mark; Massadiq, Magdalena

2017-07-01

Basic science courses are extremely important as a foundation for scaffolding knowledge and then applying it in future courses, clinical situations as well as in a professional career. Anatomical sciences, which include tooth morphology, oral histology, oral embryology, and head and neck anatomy form a core part of the preclinical courses in dental technology programs. In this article, the importance and relevance of anatomical sciences to dental personnel with no direct contact with patients (dental technicians) and limited discipline related contact with patients (dental prosthetists) is highlighted. Some light is shed on the role of anatomical sciences in the pedagogical framework and its significance in the educational process and interprofessional learning of dental technicians and prosthetists using oral biology as an example in the dental curriculum. To conclude, anatomical sciences allow dental technicians and prosthetists to a gain a better insight of how tissues function, leading to a better understanding of diagnosis, comprehensive treatment planning and referrals if needed. Patient communication and satisfaction also increases as a result of this deep understanding of oral tissues. Anatomical sciences bridge the gap between basic science, preclinical, and clinical courses, which leads to a holistic approach in patient management. Finally, treatment outcomes are positively affected due to the appreciation of the macro and micro structure of oral tissues. Anat Sci Educ 10: 395-404. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Exploring the consistency, transparency and portability of dental technology education: benchmarking across Norway, Ireland and Australia.

PubMed

Myhrer, T; Evans, J L; Haugen, H K; Gorman, C; Kavanagh, Y; Cameron, A B

2016-08-01

Dental technology programmes of study must prepare students to practice in a broad range of contemporary workplaces. Currently, there is limited evidence to benchmark dental technology education - locally, nationally or internationally. This research aims to improve consistency, transparency and portability of dental technology qualifications across three countries. Data were accessed from open-source curriculum documents and five calibrated assessment items. Three institutions collaborated with Oslo and Akershus University College, Norway; Trinity College Dublin, Ireland; and Griffith University, Australia. From these, 29-44 students completed 174 assessments. The curricula reflect the community needs of each country and display common themes that underpin professional dental technology practice. Assessment results differed between institutions but no more than a normal distribution. Face-to-face assessment moderation was critical to achieve consistency. This collaborative research has led to the development of a set of guidelines for other dental technology education providers interested in developing or aligning courses internationally to enhance the portability of qualifications. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Potential of information technology in dental education.

PubMed

Mattheos, N; Stefanovic, N; Apse, P; Attstrom, R; Buchanan, J; Brown, P; Camilleri, A; Care, R; Fabrikant, E; Gundersen, S; Honkala, S; Johnson, L; Jonas, I; Kavadella, A; Moreira, J; Peroz, I; Perryer, D G; Seemann, R; Tansy, M; Thomas, H F; Tsuruta, J; Uribe, S; Urtane, I; Walsh, T F; Zimmerman, J; Walmsley, A D

2008-02-01

The use of information technology (IT) in dentistry is far ranging. In order to produce a working document for the dental educator, this paper focuses on those methods where IT can assist in the education and competence development of dental students and dentists (e.g. e-learning, distance learning, simulations and computer-based assessment). Web pages and other information-gathering devices have become an essential part of our daily life, as they provide extensive information on all aspects of our society. This is mirrored in dental education where there are many different tools available, as listed in this report. IT offers added value to traditional teaching methods and examples are provided. In spite of the continuing debate on the learning effectiveness of e-learning applications, students request such approaches as an adjunct to the traditional delivery of learning materials. Faculty require support to enable them to effectively use the technology to the benefit of their students. This support should be provided by the institution and it is suggested that, where possible, institutions should appoint an e-learning champion with good interpersonal skills to support and encourage faculty change. From a global prospective, all students and faculty should have access to e-learning tools. This report encourages open access to e-learning material, platforms and programs. The quality of such learning materials must have well defined learning objectives and involve peer review to ensure content validity, accuracy, currency, the use of evidence-based data and the use of best practices. To ensure that the developers' intellectual rights are protected, the original content needs to be secure from unauthorized changes. Strategies and recommendations on how to improve the quality of e-learning are outlined. In the area of assessment, traditional examination schemes can be enriched by IT, whilst the Internet can provide many innovative approaches. Future trends in IT will

[Exposure to metals in dental laboratories].

PubMed

Apostoli, P; Ferioli, A; Crippa, M; Redaelli, P; Braga Marcazzan, G; Alessio, L

1988-11-01

Dental care includes handling of different types of metal alloys usually classified as "noble" and "base" in relation to the presence or absence of either gold or other precious metals. It must be born in mind that exposure to metals in this activities is due not only to those metals present in the alloys but also to those contained in the other materials used during the processes of casting and finishing. The most important metals are the following: Al, Be, Cd, Cr, Co, Cu, Au, In, Hg, Mo, Ni, Pd, Pt, Si, Ag, Sn, Ti, W, Zn. In this paper we investigated the environmental exposure to metals in dental laboratories studying the environmental air concentration of metals in casting and finishing processes estimating the "quality" of the elements present by Particle Induces X-ray Emission (PIXE) and the "quantity" of the elements by electro thermic atomic absorption spectrophotometry (ET-AAS) and the concentration of the main metals in the blood and in the urine of exposed technicians by ET-AAS. These analyses permitted to detect all the metals present in the work environment and to quantify their concentration, which always resulted to be low (except some metals during short time operations). The biological monitoring revealed the existence of moderate absorption of these metals in the exposed workers but it is not possible for us to affirm if this phenomenon represents a real risk for the health of the technicians. Hence further epidemiological and health surveillance investigations are needed to verify morbidity and mortality of the subjects employed in this activity.

Survey of student attitudes towards digital simulation technologies at a dental school in China.

PubMed

Ren, Q; Wang, Y; Zheng, Q; Ye, L; Zhou, X D; Zhang, L L

2017-08-01

Digital simulation technologies have become widespread in healthcare education, especially in dentistry; these technologies include digital X-ray images, digital microscopes, virtual pathology slides and other types of simulation. This study aimed to assess students' attitudes towards digital simulation technologies at a large, top-ranked dental school in China, as well as find out how students compare the digital technologies with traditional training methods. In April 2015, a custom-designed questionnaire was distributed to a total of 389 students who had received digital technology and simulation-based training in West China Dental School during 2012-2014. Results of a cross-sectional survey show that most students accept digital simulation technology; they report that the technology is stimulating and facilitates self-directed and self-paced learning. These findings, together with the objective advantages of digital technology, suggest that digital simulation training offers significant potential for dental education, highlighting the need for further research and more widespread implementation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Prediction of practical performance in preclinical laboratory courses - the return of wire bending for admission of dental students in Hamburg.

PubMed

Kothe, Christian; Hissbach, Johanna; Hampe, Wolfgang

2014-01-01

Although some recent studies concluded that dexterity is not a reliable predictor of performance in preclinical laboratory courses in dentistry, they could not disprove earlier findings which confirmed the worth of manual dexterity tests in dental admission. We developed a wire bending test (HAM-Man) which was administered during dental freshmen's first week in 2008, 2009, and 2010. The purpose of our study was to evaluate if the HAM-Man is a useful selection criterion additional to the high school grade point average (GPA) in dental admission. Regression analysis revealed that GPA only accounted for a maximum of 9% of students' performance in preclinical laboratory courses, in six out of eight models the explained variance was below 2%. The HAM-Man incrementally explained up to 20.5% of preclinical practical performance over GPA. In line with findings from earlier studies the HAM-Man test of manual dexterity showed satisfactory incremental validity. While GPA has a focus on cognitive abilities, the HAM-Man reflects learning of unfamiliar psychomotor skills, spatial relationships, and dental techniques needed in preclinical laboratory courses. The wire bending test HAM-Man is a valuable additional selection instrument for applicants of dental schools.

Technology meets ergonomics in the dental clinic: new toys for old games?

PubMed

Rucker, L M

2000-01-01

Although there have been considerable advances in dental equipment, the introduction of such technology has often been piecemeal and "rushed to market." As a result there has been insufficient attention paid to ergonomic considerations and a systematic approach to, and theory of, dental ergonomics have not yet emerged.

Quality Evaluation of Zirconium Dioxide Frameworks Produced in Five Dental Laboratories from Different Countries.

PubMed

Schneebeli, Esther; Brägger, Urs; Scherrer, Susanne S; Keller, Andrea; Wittneben, Julia G; Hicklin, Stefan P

2017-07-01

The aim of this study was to assess and compare quality as well as economic aspects of CAD/CAM high strength ceramic three-unit FDP frameworks ordered from dental laboratories located in emerging countries and Switzerland. The master casts of six cases were sent to five dental laboratories located in Thailand (Bangkok), China (Peking and Shenzhen), Turkey (Izmir), and Switzerland (Bern). Each laboratory was using a different CAD/CAM system. The clinical fit of the frameworks was qualitatively assessed, and the thickness of the framework material, the connector height, the width, and the diameter were evaluated using a measuring sensor. The analysis of the internal fit of the frameworks was performed by means of a replica technique, whereas the inner and outer surfaces of the frameworks were evaluated for traces of postprocessing and damage to the intaglio surface with light and electronic microscopes. Groups (dental laboratories and cases) were compared for statistically significant differences using Mann-Whitney U-tests after Bonferroni correction. An acceptable clinical fit was found at 97.9% of the margins produced in laboratory E, 87.5% in B, 93.7% in C, 79.2% in A, and 62.5% in D. The mean framework thicknesses were not statistically significantly different for the premolar regions; however, for the molar area 4/8 of the evaluated sites were statistically significantly different. Circumference, surface, and width of the connectors produced in the different laboratories were statistically significantly different but not the height. There were great differences in the designs for the pontic and connector regions, and some of the frameworks would not be recommended for clinical use. Traces of heavy postprocessing were found in frameworks from some of the laboratories. The prices per framework ranged from US$177 to US$896. By ordering laboratory work in developing countries, a considerable price reduction was obtained compared to the price level in Switzerland

From information technology to informatics: the information revolution in dental education.

PubMed

Schleyer, Titus K; Thyvalikakath, Thankam P; Spallek, Heiko; Dziabiak, Michael P; Johnson, Lynn A

2012-01-01

The capabilities of information technology (IT) have advanced precipitously in the last fifty years. Many of these advances have enabled new and beneficial applications of IT in dental education. However, conceptually, IT use in dental schools is only in its infancy. Challenges and opportunities abound for improving how we support clinical care, education, and research with IT. In clinical care, we need to move electronic dental records beyond replicating paper, connect information on oral health to that on systemic health, facilitate collaborative care through teledentistry, and help clinicians apply evidence-based dentistry and preventive management strategies. With respect to education, we should adopt an evidence-based approach to IT use for teaching and learning, share effective educational content and methods, leverage technology-mediated changes in the balance of power between faculty and students, improve technology support for clinical teaching, and build an information infrastructure centered on learners and organizations. In research, opportunities include reusing clinical care data for research studies, helping advance computational methods for research, applying generalizable research tools in dentistry, and reusing research data and scientific workflows. In the process, we transition from a focus on IT-the mere technical aspects of applying computer technology-to one on informatics: the what, how, and why of managing information.

Summary of: dental practitioners and a digital future: an initial exploration of barriers and incentives to adopting digital technologies.

PubMed

Addy, Liam

2013-12-01

Digital technologies are proliferating into dental practices. While their technical attributes have often been studied, it remains unclear why some dentists adopt and use these technologies more than others. AIM To explore the incentives for and barriers against accepting and using digital dental technologies. Eleven semi-structured qualitative interviews were conducted with experts in dentistry, dental technology and dental education in the Netherlands. Dentists' acceptance and use of digital technologies are to varying degrees driven by the perceived advantages over analogue methods, perceived influence on treatment quality, dentists' personal and professional orientation, and social influence from peers and external groups. These effects are complemented by personal and dental-practice characteristics. The findings suggest that there are large differences in motivation to adopt and use digital technologies between early adopters, late adopters and non-adopters, which should be examined in greater detail. We recommend that educators, dentists, and representatives of the dental industry who deal with the diffusion of these technologies take account of dentists' widely different attitudes to digitalisation.

What dental educators need to understand about emerging technologies to incorporate them effectively into the educational process.

PubMed

Stein, Corey D; Eisenberg, Elise S; O'Donnell, Jean A; Spallek, Heiko

2014-04-01

Many dental schools are currently struggling with the adoption of emerging technologies and the incorporation of these technologies into the educational process. Dental students exhibit an increasing degree of digital comfort when using social networking, mobile devices, search engines, or e-textbooks. Although the majority of students might consider themselves to be very skilled at using information technology, many faculty members would claim the opposite when evaluating their own knowledge and skills in the use of technology. As the use of technology, both formally and informally, continues to increase, dental educators are faced with many questions, such as: Does students' digital comfort disguise a lack of information literacy? What is the appropriate path of implementing technology into teaching and learning, and how can institutions support such an implementation? This article surveys a series of myths that exist about the use of technology in education and raises questions about their validity and how dental educators can avoid being misled by them.

Emerging technologies for diagnosis of dental caries: The road so far

NASA Astrophysics Data System (ADS)

Amaechi, Bennett T.

2009-05-01

It is now universally recognized that the development of new technologies for early detection and quantitative monitoring of dental decay at an early stage of formation could provide health and economic benefits ranging from timely preventive interventions to reduction in the time required for clinical trials of anticaries agents. The use of technologies as adjunct to clinical visual examination for caries diagnosis will facilitate preventive care in dentistry to lower treatment cost as well as reduce the cost and time for testing potential anticaries agents. This article describes the various technologies available to aid the dental practitioners in detecting dental caries at the earliest stage of its formation, assessing the activities of the detected carious lesion, and quantitatively or qualitatively monitoring of the lesion over time. The need and the importance of these technologies were also discussed. The data discussed are primarily based on published scientific studies and reviews from case reports, clinical trials, and in vitro and in vivo studies. References have been traced manually by MEDLINE® or through manufacturer's websites. While some of the devices are fully developed and commercially available, others are still under development. The devices vary in their modes of action as well as their capability as caries diagnostic aids. It is clear that the differences in caries presentations and behavior in different anatomical sites make it unlikely that any one diagnostic modality will have adequate sensitivity and specificity of detection of carious lesions for all sites; a combination of diagnostic tools will help us diagnose lesions earlier and detect failing restorations sooner, all to avoid more costly, destructive dental procedures and truly take dentistry into the preventive rather than the reactive mode.

Surface texture and hardness of dental alloys processed by alternative technologies

NASA Astrophysics Data System (ADS)

Porojan, Liliana; Savencu, Cristina E.; Topală, Florin I.; Porojan, Sorin D.

2017-08-01

Technological developments have led to the implementation of novel digitalized manufacturing methods for the production of metallic structures in prosthetic dentistry. These technologies can be classified as based on subtractive manufacturing, assisted by computer-aided design/computer-aided manufacturing (CAD/CAM) systems, or on additive manufacturing (AM), such as the recently developed laser-based methods. The aim of the study was to assess the surface texture and hardness of metallic structures for dental restorations obtained by alternative technologies: conventional casting (CST), computerized milling (MIL), AM power bed fusion methods, respective selective laser melting (SLM) and selective laser sintering (SLS). For the experimental analyses metallic specimens made of Co-Cr dental alloys were prepared as indicated by the manufacturers. The specimen structure at the macro level was observed by an optical microscope and micro-hardness was measured in all substrates. Metallic frameworks obtained by AM are characterized by increased hardness, depending also on the surface processing. The formation of microstructural defects can be better controlled and avoided during SLM and MIL process. Application of power bed fusion techniques, like SLS and SLM, is currently a challenge in dental alloys processing.

Use of information and communication technology among dental students and registrars at the faculty of dental sciences, University of Lagos.

PubMed

Butali, A; Adeyemo, W L; Akinshipo, A O; Fashina, A; Savage, K O

2011-01-01

The aim of this study was to investigate the use of information technology amongst dental students, dental nursing students and resident doctors in training at the faculty of dental Surgery University of Lagos. A structured questionnaire was distributed to 58 clinical dental students in 4 th and 5 th years of training in the 2010/2011 academic year, 36 dental nursing students and 63 resident doctors undergoing specialist training. All participants have access to the computers, 2.5% within the University and 31% at home and internet cafes and about 50% have the basic skills required. A significant difference was observed between the resident doctors and clinical dental students (P = 0.003), between resident doctors and dental nursing students (P = 0.0001) when the use of computer for study was compared. Over 95% of participants have access to internet and about 50% of them use the internet for their studies. A significant difference (P = 0.005) was observed between clinical dental students and dental nursing students that use the internet and word processing. The resident doctors used the computers for multimedia and MedLine search tools more than clinical dental students (P = 0.004) and dental nursing students (0.0006). The findings of the study show that dental students and resident doctors in training have the requisite knowledge to operate the computer for use in their study and personal activities.

Technology Systems. Laboratory Activities.

ERIC Educational Resources Information Center

Brame, Ray; And Others

This guide contains 43 modules of laboratory activities for technology education courses. Each module includes an instructor's resource sheet and the student laboratory activity. Instructor's resource sheets include some or all of the following elements: module number, course title, activity topic, estimated time, essential elements, objectives,…

Prediction of practical performance in preclinical laboratory courses – the return of wire bending for admission of dental students in Hamburg

PubMed Central

Kothe, Christian; Hissbach, Johanna; Hampe, Wolfgang

2014-01-01

Although some recent studies concluded that dexterity is not a reliable predictor of performance in preclinical laboratory courses in dentistry, they could not disprove earlier findings which confirmed the worth of manual dexterity tests in dental admission. We developed a wire bending test (HAM-Man) which was administered during dental freshmen’s first week in 2008, 2009, and 2010. The purpose of our study was to evaluate if the HAM-Man is a useful selection criterion additional to the high school grade point average (GPA) in dental admission. Regression analysis revealed that GPA only accounted for a maximum of 9% of students’ performance in preclinical laboratory courses, in six out of eight models the explained variance was below 2%. The HAM-Man incrementally explained up to 20.5% of preclinical practical performance over GPA. In line with findings from earlier studies the HAM-Man test of manual dexterity showed satisfactory incremental validity. While GPA has a focus on cognitive abilities, the HAM-Man reflects learning of unfamiliar psychomotor skills, spatial relationships, and dental techniques needed in preclinical laboratory courses. The wire bending test HAM-Man is a valuable additional selection instrument for applicants of dental schools. PMID:24872857

Digital dentistry: information technology for today's (and tomorrow's) dental practice.

PubMed

Hirschinger, R

2001-03-01

Digital dentistry is not the wave of the future; it is occurring now. Whether a dentist embraces new technology will define his or her practice and, possibly, future. The aim of this article is to inform practitioners of the various components that constitute a digital dental practice, the technologies available today, and those on the horizon.

Mississippi Curriculum Framework for Dental Hygiene Technology (Program CIP: 51.0602--Dental Hygienist). Postsecondary Education.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the dental hygiene technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies. Section II…

Dental Technology. Career Education. DS Manual 2835.1.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

This guide is designed for use in helping junior and senior high school students explore the field of dental technology as a potential career area. Included in the manual are the following materials: definitions, a key to the organization and numbering code and symbols used in the lists of objectives, lists of general and program objectives with…

The future of education and training in dental technology: designing a dental curriculum that facilitates teamwork across the oral health professions.

PubMed

Evans, J; Henderson, A; Johnson, N

2010-03-13

Teamwork is essential for the provision of contemporary, high quality oral health care. Teamwork skills need to be taught and learnt and therefore ought to be one of the core competencies in all dental education programmes: dentistry, oral health therapy, dental technology and dental assisting. Currently, lack of opportunities for collaborative learning and practice within educational establishments, and in the practising professions, hamper the development of effective teamwork. For students across oral health care, learning 'together' requires positive action for teamwork skills to be developed. Interprofessional curricula need to be formally developed, based on evidence from the wider education literature that demonstrates how to maximise the engagements needed for teamwork in practice. Rigorous study of interprofessional education within dentistry and oral health is in its infancy. Anecdotal evidence indicates that dental technology students who experience an interprofessional curriculum are better prepared for collaborative practice. Formalised interprofessional education is posited as an effective strategy to improve interactions among oral health professionals leading to improved patient care. This paper reviews the extant literature and describes the approach currently being trialled at Griffith University.

From Information Technology to Informatics: The Information Revolution in Dental Education

PubMed Central

Schleyer, Titus K.; Thyvalikakath, Thankam P.; Spallek, Heiko; Dziabiak, Michael P.; Johnson, Lynn A.

2014-01-01

The capabilities of information technology (IT) have advanced precipitously in the last fifty years. Many of these advances have enabled new and beneficial applications of IT in dental education. However, conceptually, IT use in dental schools is only in its infancy. Challenges and opportunities abound for improving how we support clinical care, education, and research with IT. In clinical care, we need to move electronic dental records beyond replicating paper, connect information on oral health to that on systemic health, facilitate collaborative care through teledentistry, and help clinicians apply evidence-based dentistry and preventive management strategies. With respect to education, we should adopt an evidence-based approach to IT use for teaching and learning, share effective educational content and methods, leverage technology-mediated changes in the balance of power between faculty and students, improve technology support for clinical teaching, and build an information infrastructure centered on learners and organizations. In research, opportunities include reusing clinical care data for research studies, helping advance computational methods for research, applying generalizable research tools in dentistry, and reusing research data and scientific workflows. In the process, we transition from a focus on IT—the mere technical aspects of applying computer technology—to one on informatics: the what, how, and why of managing information. PMID:22262557

Occupational skin diseases in dental laboratory technicians. (I). Clinical picture and causative factors.

PubMed

Rustemeyer, T; Frosch, P J

1996-02-01

In Germany, occupational skin disease (OSD) in dental technicians (DT) has been steadily rising in recent years and causing considerable costs for medical care and rehabilitation. Our objective in this study was to: (i) examine affected workers; (ii) perform patch tests to identify causative agents; (iii) develop strategies of prevention. 7 dental laboratories were inspected as to materials used, working habits, safety regulations, etc. A computer data base was developed for products (trade name, active ingredient, additives, etc.). A questionnaire regarding development of OSD was sent out to 1132 dental technicians (45 questions). 55 DT with suspected OSD were examined and patch tested with the standard series, an extensive series of methacrylates, and own materials. Working conditions, and knowledge of potential hazards, varied greatly in the laboratories visited. The safety data sheets of working materials were of little use and required supplementation by the computer data base, which provided rapid access to allergological information (e.g., type of acrylate, concentration). In the questionnaire (173 answers), 36% reported skin lesions attributed to work and 1/3 suspected plastic materials as their primary cause. Among the 55 DT examined, allergic contact dermatitis was diagnosed in 63.6% and irritant contact dermatitis in 23.6%. Most of the allergens identified (74%) were found in plastic materials (methyl methacrylate (MMA), 9 patients (16%); 2-hydroxyethyl methacrylate (2-HEMA), 18 patients (33%); ethyleneglycol dimethacrylate (EGDMA), 15 patients (27%)). In 16 patients, multiple sensitizations to various methacrylates were found. The fingertips were primarily involved in allergic contact dermatitis (93%), whereas in irritant contact dermatitis, the dorsa of the fingers (especially of the dominant hand) were affected (80%). 9 patients also showed lesions on the face, neck and forearms. The main irritant factors included wet work, contact with plaster

The dental handpiece: technology continues to impact everyday practice.

PubMed

Lowe, Robert A

2015-04-01

One of the most fundamental devices used in dentistry, the handpiece can enhance the efficiency of everyday dental tasks. Through the years, handpieces have gradually been redesigned and upgraded to become the highly accurate and sophisticated tools they are today. Technological advances continue to improve these indispensable instruments.

Study of Visual and Auditory Presentation in Dental Lecture and Laboratory Instruction. Final Report.

ERIC Educational Resources Information Center

Allen, William H.; And Others

This study compared the relative effectiveness of an automated teaching machine with instructor presented instruction in graduate dental teaching. The objectives were to: (1) determine the effects of 3 laboratory instructional procedures used in combination with 2 lectures on the acquisition of manual operative skills, the learning of information…

The Human Interface Technology Laboratory.

ERIC Educational Resources Information Center

Washington Univ., Seattle. Washington Technology Center.

This booklet contains information about the Human Interface Technology Laboratory (HITL), which was established by the Washington Technology Center at the University of Washington to transform virtual world concepts and research into practical, economically viable technology products. The booklet is divided into seven sections: (1) a brief…

Mississippi Curriculum Framework for Dental Assisting Technology Programs (Program CIP: 51.0601--Dental Assistant). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the dental assisting technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies. Section II…

Laboratory automation: trajectory, technology, and tactics.

PubMed

Markin, R S; Whalen, S A

2000-05-01

Laboratory automation is in its infancy, following a path parallel to the development of laboratory information systems in the late 1970s and early 1980s. Changes on the horizon in healthcare and clinical laboratory service that affect the delivery of laboratory results include the increasing age of the population in North America, the implementation of the Balanced Budget Act (1997), and the creation of disease management companies. Major technology drivers include outcomes optimization and phenotypically targeted drugs. Constant cost pressures in the clinical laboratory have forced diagnostic manufacturers into less than optimal profitability states. Laboratory automation can be a tool for the improvement of laboratory services and may decrease costs. The key to improvement of laboratory services is implementation of the correct automation technology. The design of this technology should be driven by required functionality. Automation design issues should be centered on the understanding of the laboratory and its relationship to healthcare delivery and the business and operational processes in the clinical laboratory. Automation design philosophy has evolved from a hardware-based approach to a software-based approach. Process control software to support repeat testing, reflex testing, and transportation management, and overall computer-integrated manufacturing approaches to laboratory automation implementation are rapidly expanding areas. It is clear that hardware and software are functionally interdependent and that the interface between the laboratory automation system and the laboratory information system is a key component. The cost-effectiveness of automation solutions suggested by vendors, however, has been difficult to evaluate because the number of automation installations are few and the precision with which operational data have been collected to determine payback is suboptimal. The trend in automation has moved from total laboratory automation to a

Progress in dimethacrylate-based dental composite technology and curing efficiency.

PubMed

Leprince, Julian G; Palin, William M; Hadis, Mohammed A; Devaux, Jacques; Leloup, Gaetane

2013-02-01

This work aims to review the key factors affecting the polymerization efficiency of light-activated resin-based composites. The different properties and methods used to evaluate polymerization efficiency will also be critically appraised with focus on the developments in dental photopolymer technology and how recent advances have attempted to improve the shortcomings of contemporary resin composites. Apart from the classical literature on the subject, the review focused in particular on papers published since 2009. The literature research was performed in Scopus with the terms "dental resin OR dimethacrylate". The list was screened and all papers relevant to the objectives of this work were included. Though new monomer technologies have been developed and some of them already introduced to the dental market, dimethacrylate-based composites still currently represent the vast majority of commercially available materials for direct restoration. The photopolymerization of resin-based composites has been the subject of numerous publications, which have highlighted the major impact of the setting process on material properties and quality of the final restoration. Many factors affect the polymerization efficiency, be they intrinsic; photoinitiator type and concentration, viscosity (co-monomer composition and ratio, filler content) and optical properties, or extrinsic; light type and spectrum, irradiation parameters (radiant energy, time and irradiance), curing modes, temperature and light guide tip positioning. : This review further highlights the apparent need for a more informative approach by manufacturers to relay appropriate information in order for dentists to optimize material properties of resin composites used in daily practice. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Noise Exposure Assessment in a Dental School

PubMed Central

Kaimook, Wandee; Tantisarasart, Ratchada; Sooksamear, Puwanai; Chayaphum, Satith; Kongkamol, Chanon; Srisintorn, Wisarut; Phakthongsuk, Pitchaya

2011-01-01

Objectives This cross-sectional study was performed in the Dental School of Prince of Songkla University to ascertain noise exposure of dentists, dental assistants, and laboratory technicians. A noise spectral analysis was taken to illustrate the spectra of dental devices. Methods A noise evaluation was performed to measure the noise level at dental clinics and one dental laboratory from May to December 2010. Noise spectral data of dental devices were taken during dental practices at the dental services clinic and at the dental laboratory. A noise dosimeter was set following the Occupational Safety and Health Administration criteria and then attached to the subjects' collar to record personal noise dose exposure during working periods. Results The peaks of the noise spectrum of dental instruments were at 1,000, 4,000, and 8,000 Hz which depended on the type of instrument. The differences in working areas and job positions had an influence on the level of noise exposure (p < 0.01). Noise measurement in the personal hearing zone found that the laboratory technicians were exposed to the highest impulsive noise levels (137.1 dBC). The dentists and dental assistants who worked at a pedodontic clinic had the highest percent noise dose (4.60 ± 3.59%). In the working areas, the 8-hour time-weighted average of noise levels ranged between 49.7-58.1 dBA while the noisiest working area was the dental laboratory. Conclusion Dental personnel are exposed to noise intensities lower than occupational exposure limits. Therefore, these dental personnel may not experience a noise-induced hearing loss. PMID:22953219

Noise exposure assessment in a dental school.

PubMed

Choosong, Thitiworn; Kaimook, Wandee; Tantisarasart, Ratchada; Sooksamear, Puwanai; Chayaphum, Satith; Kongkamol, Chanon; Srisintorn, Wisarut; Phakthongsuk, Pitchaya

2011-12-01

This cross-sectional study was performed in the Dental School of Prince of Songkla University to ascertain noise exposure of dentists, dental assistants, and laboratory technicians. A noise spectral analysis was taken to illustrate the spectra of dental devices. A noise evaluation was performed to measure the noise level at dental clinics and one dental laboratory from May to December 2010. Noise spectral data of dental devices were taken during dental practices at the dental services clinic and at the dental laboratory. A noise dosimeter was set following the Occupational Safety and Health Administration criteria and then attached to the subjects' collar to record personal noise dose exposure during working periods. The peaks of the noise spectrum of dental instruments were at 1,000, 4,000, and 8,000 Hz which depended on the type of instrument. The differences in working areas and job positions had an influence on the level of noise exposure (p < 0.01). Noise measurement in the personal hearing zone found that the laboratory technicians were exposed to the highest impulsive noise levels (137.1 dBC). The dentists and dental assistants who worked at a pedodontic clinic had the highest percent noise dose (4.60 ± 3.59%). In the working areas, the 8-hour time-weighted average of noise levels ranged between 49.7-58.1 dBA while the noisiest working area was the dental laboratory. Dental personnel are exposed to noise intensities lower than occupational exposure limits. Therefore, these dental personnel may not experience a noise-induced hearing loss.

The awareness and attitudes of students of one indian dental school toward information technology and its use to improve patient care.

PubMed

Jathanna, Vinod R; Jathanna, Ramya V; Jathanna, Roopalekha

2014-01-01

Many obstacles need to be overcome if digital and electronic technologies are to be fully integrated in the operation of dental clinics in some countries. These obstacles may be physical, technical, or psychosocial barriers in the form of perceptions and attitudes related to software incompatibilities, patient privacy, and interference with the patient-practitioner relationship. The objectives of the study are to assess the perceptions of Indian dental students of one school toward the usefulness of digital technologies in improving dental practice; their willingness to use digital and electronic technologies; the perceived obstacles to the use of digital and electronic technologies in dental care setups; and their attitudes toward Internet privacy issues. The study population consisted of 186 final year undergraduate dental students from the A. B. Shetty Memorial institute of Dental Sciences, Rajiv Gandhi University of Health Sciences, Mangalore, India. Survey data were analyzed descriptively . Most students indicated that information technology enhances patient satisfaction, the quality of dental record, diagnosis, treatment planning, and doctor-doctor communication. Cost of equipment and need for technical training were regarded as major obstacles by substantial proportions of respondents. Most dental students at our school feel that the information technology will support their decision making in diagnoses and devising effective treatment plans, which in turn increase patient satisfaction and quality of care. Students also perceived that lack of technical knowledge and the high cost of implementation are major barriers to developing information technology in India.

Dental enamel defect diagnosis through different technology-based devices.

PubMed

Kobayashi, Tatiana Yuriko; Vitor, Luciana Lourenço Ribeiro; Carrara, Cleide Felício Carvalho; Silva, Thiago Cruvinel; Rios, Daniela; Machado, Maria Aparecida Andrade Moreira; Oliveira, Thais Marchini

2018-06-01

Dental enamel defects (DEDs) are faulty or deficient enamel formations of primary and permanent teeth. Changes during tooth development result in hypoplasia (a quantitative defect) and/or hypomineralisation (a qualitative defect). To compare technology-based diagnostic methods for detecting DEDs. Two-hundred and nine dental surfaces of anterior permanent teeth were selected in patients, 6-11 years of age, with cleft lip with/without cleft palate. First, a conventional clinical examination was conducted according to the modified Developmental Defects of Enamel Index (DDE Index). Dental surfaces were evaluated using an operating microscope and a fluorescence-based device. Interexaminer reproducibility was determined using the kappa test. To compare groups, McNemar's test was used. Cramer's V test was used for comparing the distribution of index codes obtained after classification of all dental surfaces. Cramer's V test revealed statistically significant differences (P < .0001) in the distribution of index codes obtained using the different methods; the coefficients were 0.365 for conventional clinical examination versus fluorescence, 0.961 for conventional clinical examination versus operating microscope and 0.358 for operating microscope versus fluorescence. The sensitivity of the operating microscope and fluorescence method was statistically significant (P = .008 and P < .0001, respectively). Otherwise, the results did not show statistically significant differences in accuracy and specificity for either the operating microscope or the fluorescence methods. This study suggests that the operating microscope performed better than the fluorescence-based device and could be an auxiliary method for the detection of DEDs. © 2017 FDI World Dental Federation.

Guidance, Navigation and Control Digital Emulation Technology Laboratory. Volume 1. Part 2. Task 1: Digital Emulation Technology Laboratory

DTIC Science & Technology

1991-09-27

AD-A241 692 II I] II I11 ANNUAL REPORT VOLUME 1 PART 2 TASK 1: DIGITAL EMULATION TECHNOLOGY LABORATOIRY REPORT NO. AR-0142-91-001 September 27, 1991... DIGITAL EMULATION TECHNOLOGY LABORATORY Contract No. DASG60-89-C-0142 Sponsored By The United States Army ? trategic Defense Command COMPUTER...ANNUAL REPORT VOLUME 1 PART 2 TASK 1: DIGITAL EMULATION TECHNOLOGY LABORATORY September 27, 1991 Authors Thomas R. Collins and Stephen R. Wachtel

Development and implications of technology in reform-based physics laboratories

NASA Astrophysics Data System (ADS)

Chen, Sufen; Lo, Hao-Chang; Lin, Jing-Wen; Liang, Jyh-Chong; Chang, Hsin-Yi; Hwang, Fu-Kwun; Chiou, Guo-Li; Wu, Ying-Tien; Lee, Silvia Wen-Yu; Wu, Hsin-Kai; Wang, Chia-Yu; Tsai, Chin-Chung

2012-12-01

Technology has been widely involved in science research. Researchers are now applying it to science education in an attempt to bring students’ science activities closer to authentic science activities. The present study synthesizes the research to discuss the development of technology-enhanced laboratories and how technology may contribute to fulfilling the instructional objectives of laboratories in physics. To be more specific, this paper discusses the engagement of technology to innovate physics laboratories and the potential of technology to promote inquiry, instructor and peer interaction, and learning outcomes. We then construct a framework for teachers, scientists, and programmers to guide and evaluate technology-integrated laboratories. The framework includes inquiry learning and openness supported by technology, ways of conducting laboratories, and the diverse learning objectives on which a technology-integrated laboratory may be focused.

75 FR 16511 - Pentron Clinical Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... produce dental materials such as dental prosthetics, dental composites, dental impressions, dental... materials such as dental prosthetics, dental composites, dental impressions, dental adhesives, and other...

Self-Reported Obstacles to Regular Dental Care among Information Technology Professionals.

PubMed

Reddy, L Swetha; Doshi, Dolar; Reddy, B Srikanth; Kulkarni, Suhas; Reddy, M Padma; Satyanarayana, D; Baldava, Pavan

2016-10-01

Good oral health is important for an individual as well as social well-being. Occupational stress and work exhaustion in Information Technology (IT) professionals may influence the oral health and oral health related quality of life. To assess and compare self-reported obstacles for regular dental care and dental visits among IT professionals based on age, gender, dental insurance and working days per week. A cross-sectional study was conducted among 1,017 IT professionals to assess the self-reported obstacles to regular oral health care in Hyderabad city, Telangana, India. The Dental Rejection of Innovation Scale (DRI-S) was employed in this study. Comparison between means of DRI-S based on variables was done using t-test and ANOVA. The association between variables and DRI-S was determined using Chi-square test. A total of 1017 participants comprising of 574 (56%) males and 443 (44%) females participated in the study. As age increased, a significant increase in mean DRI-S scores was seen for total and individual domains except for the "Situational" domain wherein higher mean score (9.42±2.5; p=0.0006) was observed among 30-39 years age group. Even though females reported higher mean scores for total and individual domains when compared to males, nevertheless significant difference was seen only for total (p=0.03) and "Lack of Knowledge" (p=0.001) domain. Self-reported obstacles to regular dental care was more with increasing age, increased number of working days per week, irregular dental visits and absence of dental insurance facility.

Virtual Reality-Based Technologies in Dental Medicine: Knowledge, Attitudes and Practice among Students and Practitioners

ERIC Educational Resources Information Center

Sabalic, Maja; Schoener, Jason D.

2017-01-01

Virtual reality-based technologies have been used in dentistry for almost two decades. Dental simulators, planning software and CAD/CAM (computer-aided design/computer-aided manufacturing) systems have significantly developed over the years and changed both dental education and clinical practice. This study aimed to assess the knowledge, attitudes…

Dental Implant Systems

PubMed Central

Oshida, Yoshiki; Tuna, Elif B.; Aktören, Oya; Gençay, Koray

2010-01-01

Among various dental materials and their successful applications, a dental implant is a good example of the integrated system of science and technology involved in multiple disciplines including surface chemistry and physics, biomechanics, from macro-scale to nano-scale manufacturing technologies and surface engineering. As many other dental materials and devices, there are crucial requirements taken upon on dental implants systems, since surface of dental implants is directly in contact with vital hard/soft tissue and is subjected to chemical as well as mechanical bio-environments. Such requirements should, at least, include biological compatibility, mechanical compatibility, and morphological compatibility to surrounding vital tissues. In this review, based on carefully selected about 500 published articles, these requirements plus MRI compatibility are firstly reviewed, followed by surface texturing methods in details. Normally dental implants are placed to lost tooth/teeth location(s) in adult patients whose skeleton and bony growth have already completed. However, there are some controversial issues for placing dental implants in growing patients. This point has been, in most of dental articles, overlooked. This review, therefore, throws a deliberate sight on this point. Concluding this review, we are proposing a novel implant system that integrates materials science and up-dated surface technology to improve dental implant systems exhibiting bio- and mechano-functionalities. PMID:20480036

Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals.

PubMed

Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming

2017-09-19

Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals' health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weighted equivalent sound level, total loudness, and sharpness values were statistically significantly higher for the noise at the laboratory than that at the clinic. The degree of perceived influences and sharpness of noise were found to have the impacts on the dental professionals' working performance and health. Moreover, the risk of having a bad hearing state would a have 26% and 31% higher chance for a unit increment of the short-term and long-term impact scores, respectively. The dental professionals with the service length more than 10 years and the daily working hours of more than eight showed the highest risk to their hearing state. The worse the hearing state was, the worse the health state was found for the dental professionals. Also, the risk of dissatisfaction would be increased by 4.41 and 1.22 times for those who worked at the laboratory and a unit increment of the long-term impact score. The constructed health risk mode with the scientific and statistical evidence is hence important for the future noise management of environmental improvement.

Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note

PubMed Central

Cho, Jin-Hyung; Park, Wonse; Park, Kyeong-Mee; Kim, Seo-Yul

2017-01-01

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication. PMID:28879329

Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note.

PubMed

Cho, Jin-Hyung; Park, Wonse; Park, Kyeong-Mee; Kim, Seo-Yul; Kim, Kee-Deog

2017-03-01

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication.

Sandia National Laboratories: Microsystems Science & Technology Center

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

E-learning and the future of dental education: opinions of administrators and information technology specialists.

PubMed

Hillenburg, K L; Cederberg, R A; Gray, S A; Hurst, C L; Johnson, G K; Potter, B J

2006-08-01

The digital revolution and growth of the Internet have led to many innovations in the area of electronic learning (e-learning). To survive and prosper, educators must be prepared to respond creatively to these changes. Administrators and information technology specialists at six dental schools and their parent institutions were interviewed regarding their opinions of the impact that e-learning will have on the future of dental education. Interview questions encompassed vision, rate of change, challenges, role of faculty, resources, enrolment, collaboration, responsibility for course design and content, mission and fate of the institution. The objective of this qualitative study was to sample the opinions of educational administrators and information technology specialists from selected US universities regarding the impact of e-learning on dental education to detect trends in their attitudes. Responses to the survey indicated disagreement between administrators and informational technology specialists regarding the rate of change, generation of resources, impact on enrolment, responsibility for course design and content, mission and fate of the university. General agreement was noted with regard to vision, challenges, role of faculty and need for collaboration.

A Laboratory Course in Technological Chemistry.

ERIC Educational Resources Information Center

Wiseman, P.

1986-01-01

Describes a laboratory course taught at the University of Manchester Institute of Science and Technology (United Kingdom) which focuses on the preparation, properties, and applications of end-use products of the chemical industry. Outlines laboratory experiments on dyes, fibers, herbicides, performance testing, antioxidants, and surface active…

Effects of Various Dental Materials on Alkaline Phosphatase Extracted from Pulp: An Experiment for the Biochemistry Laboratory.

ERIC Educational Resources Information Center

Thompson, Lorin R.

1980-01-01

A laboratory experiment that demonstrates the effects of various dental materials on a representative enzyme from the pulp is outlined. The experiment encourages students to consider the effects that various restorative materials and techniques might have on enzymes in the living pulp. (Author/MLW)

Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

PubMed Central

Ritzberger, Christian; Apel, Elke; Höland, Wolfram; Peschke, Arnd; Rheinberger, Volker M.

2010-01-01

The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.

Perceptions of uncivil student behavior in dental education.

PubMed

Ballard, Richard W; Hagan, Joseph L; Townsend, Janice A; Ballard, Mary B; Armbruster, Paul C

2015-01-01

Students and faculty members in the health professions classroom are expected to exhibit professional behaviors that are conducive to maintaining a positive learning environment, but there is little published research concerning incivility in the area of dental education. The aim of this study was to evaluate differences in perceptions of incivility between dental faculty and students, between students in different courses of study, and between students in different years of dental study. The study utilized an anonymous electronic survey of all dental faculty and administrators and all dental, dental hygiene, and dental laboratory technology students at a single institution. The survey instrument contained questions concerning perceived uncivil behavior in the classroom and clinical settings. Response rates were 54% for faculty and administrators and ranged from 60% to 97% for students in various years and programs. The results were analyzed based on gender, course of study, year of study, and ethnicity. Significant differences were found regarding perceptions of civil behaviour between faculty and students, male and female students, the year of study, and the course of study. These differences point to the need for further research as well as administrative leadership and faculty development to define guidelines in this area in order to ensure a positive learning environment.

Research Notes. OERI's Regional Laboratory Technology Efforts.

ERIC Educational Resources Information Center

Garnette, Cheryl P., Ed.; Withrow, Frank B., Ed.

1989-01-01

Examines various educational technology projects that regional laboratories supported by the Office of Educational Research and Improvement (OERI) are undertaking. Highlights include innovative uses of instructional technology; tele-teaching using interactive audio conferencing; making informed decisions about technology; national teleconferences…

A Review of Research on Technology-Assisted School Science Laboratories

ERIC Educational Resources Information Center

Wang, Chia-Yu; Wu, Hsin-Ka; Lee, Silvia Wen-Yu; Hwang, Fu-Kwun; Chang, Hsin-Yi; Wu, Ying-Tien; Chiou, Guo-Li; Chen, Sufen; Liang, Jyh-Chong; Lin, Jing-Wen; Lo, Hao-Chang; Tsai, Chin-Chung

2014-01-01

Studies that incorporate technologies into school science laboratories have proliferated in the recent two decades. A total of 42 studies published from 1990 to 2011 that incorporated technologies to support school science laboratories are reviewed here. Simulations, microcomputer-based laboratories (MBLs), and virtual laboratories are commonly…

The value of inter-professional education: a comparative study of dental technology students' perceptions across four countries.

PubMed

Evans, J; Henderson, A J; Sun, J; Haugen, H; Myhrer, T; Maryan, C; Ivanow, K N; Cameron, A; Johnson, N W

2015-04-24

The ability to function as an effective member of a dental care team is a highly desirable--frequently mandated--attribute of dental technology (DT) graduates. Currently, there is little rigorous examination of how the learning of team-working skills might best be structured in a DT curriculum. This research compares DT curricula, and students' attitudes and perceptions regarding collaboration in practice, from four countries. Students (n=376) were invited to complete an education profile questionnaire, and the standardised measure--the shared learning scale. There were 196 (52%) responses. Students given opportunities to engage with others had better perceptions of inter-professional learning (IPL). Most believed that team-work and collaborative skills were best acquired by learning together with other dental care professionals, preferably sharing cases for real patients. Curricula should maximise opportunities for dental technology students to experience authentic IPL. Collaboration and team-work needs to be embedded through the whole undergraduate programme.

Noise levels of dental equipment used in dental college of Damascus University.

PubMed

Qsaibati, Mhd Loutify; Ibrahim, Ousama

2014-11-01

In dental practical classes, the acoustic environment is characterized by high noise levels in relation to other teaching areas. The aims of this study were to measure noise levels produced during the different dental learning clinics, by equipments used in dental learning areas under different working conditions and by used and brand new handpieces under different working conditions. The noise levels were measured by using a noise level meter with a microphone, which was placed at a distance of 15 cm from a main noise source in pre-clinical and clinical areas. In laboratories, the microphone was placed at a distance of 15 cm and another reading was taken 2 m away. Noise levels of dental learning clinics were measured by placing noise level meter at clinic center. The data were collected, tabulated and statistically analyzed using t-tests. Significance level was set at 5%. In dental clinics, the highest noise was produced by micro motor handpiece while cutting on acrylic (92.2 dB) and lowest noise (51.7 dB) was created by ultrasonic scaler without suction pump. The highest noise in laboratories was caused by sandblaster (96 dB at a distance of 15 cm) and lowest noise by stone trimmer when only turned on (61.8 dB at a distance of 2 m). There was significant differences in noise levels of the equipment's used in dental laboratories and dental learning clinics (P = 0.007). The highest noise level recorded in clinics was at pedodontic clinic (67.37 dB). Noise levels detected in this study were considered to be close to the limit of risk of hearing loss 85 dB.

A Guide for Planning Facilities for Occupational Preparation Programs for Dental Laboratory Technicians. Research Series No. 34.

ERIC Educational Resources Information Center

Macconnell, James D., And Others

The twelfth in a series also including guides for facilities for medical x-ray technologist, medical assistant, and medical secretary programs, the document is intended for use in the preparation of educational specifications for facilities for dental laboratory technician programs. Designed for use by those responsible for planning facilities,…

A Comparison of the Perceptions of Laboratory Directors and Medical Technology Educators Toward Career-Entry Competencies for Associate and Baccalaureate Degree Laboratory Technology Graduates.

ERIC Educational Resources Information Center

Buccelli, Pamela

A study compared the perceptions of Pennsylvania laboratory directors and medical technology educators relative to career-entry competencies for associate degree medical laboratory technicians (MLTs) and baccalaureate medical technology (MT) graduates. A 55-item competency questionnaire was administered to 265 hospital laboratory directors and 40…

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

PubMed Central

ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro

2016-01-01

ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review.

PubMed

Rosa, Wellington Luiz de Oliveira; Silva, Tiago Machado; Lima, Giana da Silveira; Silva, Adriana Fernandes; Piva, Evandro

2016-01-01

A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.

Noise levels of dental equipment used in dental college of Damascus University

PubMed Central

Qsaibati, Mhd. Loutify; Ibrahim, Ousama

2014-01-01

Background: In dental practical classes, the acoustic environment is characterized by high noise levels in relation to other teaching areas. The aims of this study were to measure noise levels produced during the different dental learning clinics, by equipments used in dental learning areas under different working conditions and by used and brand new handpieces under different working conditions. Materials and Methods: The noise levels were measured by using a noise level meter with a microphone, which was placed at a distance of 15 cm from a main noise source in pre-clinical and clinical areas. In laboratories, the microphone was placed at a distance of 15 cm and another reading was taken 2 m away. Noise levels of dental learning clinics were measured by placing noise level meter at clinic center. The data were collected, tabulated and statistically analyzed using t-tests. Significance level was set at 5%. Results: In dental clinics, the highest noise was produced by micro motor handpiece while cutting on acrylic (92.2 dB) and lowest noise (51.7 dB) was created by ultrasonic scaler without suction pump. The highest noise in laboratories was caused by sandblaster (96 dB at a distance of 15 cm) and lowest noise by stone trimmer when only turned on (61.8 dB at a distance of 2 m). There was significant differences in noise levels of the equipment's used in dental laboratories and dental learning clinics (P = 0.007). The highest noise level recorded in clinics was at pedodontic clinic (67.37 dB). Conclusions: Noise levels detected in this study were considered to be close to the limit of risk of hearing loss 85 dB. PMID:25540655

A Job Aid Solution to the Need for Low Cost, Results Oriented Dental Laboratory Manufacturing Industry Training.

ERIC Educational Resources Information Center

Selg, Timothy E.

A thesis project was conducted to design, develop, implement, and evaluate a job aid used by shipping department employees in a dental laboratory. The job aid was developed in preference to training to solve the organization's performance problem. Task analysis was performed to identify the shipping clerks' duties. These tasks were stated in the…

Internet and information technology use by dental students in Chile.

PubMed

Uribe, S; Mariño, R J

2006-08-01

As part of a larger cross-country survey of dental students, students from the School of Dentistry, The University of Valparaiso, were invited to participate in a study to describe their use of information and communication technology (ICT). Information was derived from a 124-item questionnaire which included 14 socio-demographic items and 29 items asking about ICT use. ICT items were derived from a University of Birmingham, UK, battery. Data was collected in July and August 2004. A total of 162 of the 249 dental students participated in the study. The average age of students was 21.0 years (SD 2.4 years). The majority of participants (62.1%) were female. All participants had access to a computer, and 96.4% used the Internet. Most students had home Internet connections (73.4%). The most commonly used Internet sites on at least a weekly basis were: email (92.2%); and search engines (88.3%). However, a very few (21.1%) used the Internet to search for dental information for their studies on at least a weekly basis. Furthermore, although the majority (70.4%) found Internet use easy/very easy, 56.2% indicated that any search for information was easy/very easy. The majority (72.2%) indicated that the use of virtual education would not affect their class attendance. The final multivariate model explained 26% of the variance in ICT use, significant predictors for ICT use were gender, year of study, level of difficulty in using Internet, and place of Internet use. However, Internet use was mostly for non-dental purposes.

Cab technology integration laboratory demonstration with moving map technology

DOT National Transportation Integrated Search

2013-03-31

A human performance study was conducted at the John A. Volpe National Transportation Systems Center (Volpe Center) using a locomotive research simulatorthe Cab Technology Integration Laboratory (CTIL)that was acquired by the Federal Railroad Ad...

U.S. Dental students' and faculty members' attitudes about technology, instructional strategies, student diversity, and school duration: a comparative study.

PubMed

Abdelkarim, Ahmad; Benghuzzi, Hamed; Hamadain, Elgenaid; Tucci, Michelle; Ford, Timothy; Sullivan, Donna

2014-04-01

In this study, attitudes and perceptions of U.S. dental students and faculty members were evaluated regarding four aspects of dental education: technology integration, instructional strategies, student diversity, and school duration. A survey instrument with eight statements using a five-point Likert scale and a free-text comment section was developed and distributed through Survey Monkey. A total of 426 students and 187 faculty members from ten U.S. dental schools participated, a response rate of 17 percent of those surveyed. Faculty and student responses were compared using the Mann-Whitney U test. The results of this analytic procedure revealed that the groups differed in their average responses for seven of the eight statements. Analysis of the faculty and student comments revealed similar themes between the two groups. Both dental students and dental faculty members stated that technology integration should be viewed as only a supplement to conventional instruction and showed mixed opinions about electronic textbooks. Further, both groups had positive views of the roles of problem-based learning, community service, and the integration of research practice into dental education. Both groups also valued diversity in the student body and supported the current four-year duration of dental school.

Dental photography today. Part 1: basic concepts.

PubMed

Casaglia, A; DE Dominicis, P; Arcuri, L; Gargari, M; Ottria, L

2015-01-01

This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory.

Exploring Dental Providers’ Workflow in an Electronic Dental Record Environment

PubMed Central

Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N.; Ye, Zhan

2016-01-01

Summary Background A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. Objective The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. Methods A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Results Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). Conclusions On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR. PMID:27437058

Dental photography today. Part 1: basic concepts

PubMed Central

CASAGLIA, A.; DE DOMINICIS, P.; ARCURI, L.; GARGARI, M.; OTTRIA, L.

2015-01-01

SUMMARY This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory. PMID:28042424

Three-dimensional printing physiology laboratory technology.

PubMed

Sulkin, Matthew S; Widder, Emily; Shao, Connie; Holzem, Katherine M; Gloschat, Christopher; Gutbrod, Sarah R; Efimov, Igor R

2013-12-01

Since its inception in 19th-century Germany, the physiology laboratory has been a complex and expensive research enterprise involving experts in various fields of science and engineering. Physiology research has been critically dependent on cutting-edge technological support of mechanical, electrical, optical, and more recently computer engineers. Evolution of modern experimental equipment is constrained by lack of direct communication between the physiological community and industry producing this equipment. Fortunately, recent advances in open source technologies, including three-dimensional printing, open source hardware and software, present an exciting opportunity to bring the design and development of research instrumentation to the end user, i.e., life scientists. Here we provide an overview on how to develop customized, cost-effective experimental equipment for physiology laboratories.

Structural and morphological approach of Co-Cr dental alloys processed by alternative manufacturing technologies

NASA Astrophysics Data System (ADS)

Porojan, Sorin; Bîrdeanu, Mihaela; Savencu, Cristina; Porojan, Liliana

2017-08-01

The integration of digitalized processing technologies in traditional dental restorations manufacturing is an emerging application. The objective of this study was to identify the different structural and morphological characteristics of Co-Cr dental alloys processed by alternative manufacturing techniques in order to understand the influence of microstructure on restorations properties and their clinical behavior. Metallic specimens made of Co-Cr dental alloys were prepared using traditional casting (CST), and computerized milling (MIL), selective laser sintering (SLS) and selective laser melting (SLM). The structural information of the samples was obtained by X-ray diffraction, the morphology and the topography of the samples were investigated by Scanning Electron Microscopy and Atomic Force Microscope. Given that the microstructure was significantly different, further differences in the clinical behavior of prosthetic restorations manufactured using additive techniques are anticipated.

Use of information and communication technology amongst New Zealand dental students.

PubMed

Cox, S; Pollock, D; Rountree, J; Murray, C M

2016-08-01

Although international studies have shown an increasing use of information and communication technology (ICT) amongst dental students, there are no published studies specific to New Zealand (NZ). The aim of this research was to identify device ownership and academic utilisation patterns amongst New Zealand dental students, including preferences and perceptions, and barriers to use. All currently enrolled dental students (322) were invited to complete a 15-item questionnaire. Data were statistically analysed in SPSS version 20.0. Qualitative data were analysed using a general inductive technique. The participation rate was 78.6% (N = 253 of 322). The majority of respondents personally owned laptop computers (98%) and smartphones (80.2%). A total of 10.8% of participants used a desktop computer everyday for academic purposes, whilst 78.7% used a laptop computer daily, and 54.7% a smartphone. New Zealand dental students demonstrated a high usage of ICT for their coursework with varied use of different online resources. The most frequently used online resources were search engines, social networking sites and lecture slides provided on Blackboard(®) . A high perceived value was placed on both audio podcasts and video podcasts despite the high value also placed on the traditional lectures. Although most participants (84.5%) felt that their ICT knowledge was adequate to meet academic requirements, a small number (1.6%) did not agree. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A survey of information technology management at U.S. dental schools.

PubMed

Wrzosek, Mariusz; Warner, Gary; Donoff, R Bruce; Howell, Thomas H; Karimbux, Nadeem

2003-10-01

The purpose of this project is to assess how information technology (IT) is being implemented and managed in U.S. dental schools. Recent advances in IT have restructured many of the administrative, curricular, and clinical functions in dental schools. Purchasing hardware and software and hiring personnel to maintain IT present significant financial and administrative commitments for these schools. A nine-question survey was sent to all U.S. dental schools via email with a follow-up postal mailing. Forty-six surveys were returned (83.6 percent response rate). The analysis indicates that dental schools are managing IT in vastly different ways. For example, 71 percent of the schools report a centralized structure, and 61 percent have a line item in the budget to manage IT. On average there are 4.4 full-time equivalents hired to manage IT, with the majority of these people being trained in IT (eight schools reported dually trained IT/dental personnel). The majority of schools report using software to manage their admissions process (70 percent), curriculum analysis (72 percent), and delivery of curriculum content (72 percent), as well as to manage their student clinics (91 percent, business aspect; 87 percent, patients; 65 percent, grading on clinic floor; 76 percent, managing clinical evaluations) and faculty practices (85 percent, business aspect; 65 percent, patients). The use of multimedia (50 percent) and simulation (52 percent) in the preclinical area is mixed. The purchase of laptops (24 percent) and PCs (11 percent) is required in almost a third of all schools participating in this survey. Dental schools in the United States are managing IT in a variety of different ways, using various internally and commercially available tools. The cost to institutions can be large and is usually handled in centralized structures in the school with fixed budgets. The results of this survey can be used to assist schools in the planning and implementation of IT at their

Dental Charting. Student's Manual.

ERIC Educational Resources Information Center

Weaver, Trudy Karlene; Apfel, Maura

This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

Concentration Levels of Particulate Matter of Common Dental Lab Materials in a Military Dental Lab

DTIC Science & Technology

2016-05-01

to cause contact type dermatitis in some dental laboratory technicans. 22 In both experimental animals and humans, methyl methacrylate is rapidly...being measured out and mixed. As cases of generalized neuropathy, asthma and contact dermatitis have been documented in dental laboratory technicians... contact .45 The sampling for paraffin wax particulate in the current study resulted in a REL 8-TWA of 0.2056 mg/m 3 which is well below the 2 mg/m 3

Technology Innovation at the National Renewable Energy Laboratory (Text

Science.gov Websites

market, new processes out in the fields, and to make an impact." A photo montage of six different Version) | NREL Technology Innovation at the National Renewable Energy Laboratory (Text Version ) Technology Innovation at the National Renewable Energy Laboratory (Text Version) This is the text version for

Peter F. Green - Deputy Laboratory Director, Science and Technology |

Science.gov Websites

NREL Peter F. Green - Deputy Laboratory Director, Science and Technology Peter F. Green - Deputy Laboratory Director, Science and Technology A photo of Peter Green. Green came to NREL in August than 250 collaborative publications and 20 patent disclosures. Green also served as the B.F. Goodrich

U.S. Dental School Deans’ Perceptions of the Rising Cost of Dental Education and Borrowing Pressures on Dental Students: Report of Survey Results.

PubMed

McAllister, Dora Elías; Garrison, Gwen E; Feldman, Cecile A; Anderson, Eugene L; Cook, Bryan J; Valachovic, Richard W

2015-06-01

This report presents findings from a survey of U.S. dental school deans designed to capture their perceptions regarding the rising cost of dental education and its impact on borrowing by dental students to finance their education. The survey included questions about factors influencing the cost of dental education, concerns about dental student borrowing, and financial awareness resources for students. The survey was distributed to the deans of all 63 U.S. dental schools in January 2013; 42 deans responded, for a 67% response rate. The results indicate that, according to the responding deans, new clinical technologies, technology costs, and central university taxes are the main factors that contribute to the increasing cost of dental education. Coupled with reduced state appropriations at public dental schools and declines in private giving at all dental schools, dental school deans face a perplexing set of financial management challenges. Tuition and fees are a primary source of revenue for all dental schools; however, many deans do not have total control over the cost of attending their schools since tuition and fees are often tied to mandates and policies from the parent university and the state legislature. The findings of this study indicate that U.S. dental school deans are aware of and concerned about the impact of increases in tuition and fees on dental student debt and that they are using a variety of strategies to address the growth in dental student borrowing.

B-Cure Laser Dental Pro technology for prevention and treatment of peri-implant mucositis

NASA Astrophysics Data System (ADS)

Gileva, O. S.; Libik, T. V.; Chuprakov, M. A.; Yakov, A. Y.; Mirsaeva, F. Z.

2017-09-01

Oral mucositis (OM) is the severe inflammation, lesioning and ulceration of the epithelia, accompanied by bleeding and intensive pain. OM is a common complication of dental implantation. Low-level laser therapy (LLLT) has been found to enhance the repair and healing of epithelia. The aim of this study was to evaluate the effectiveness of preventive and treatment use of LLLT (B-Cure Laser Dental Pro technology in original author's techniques) in the patients who have undergone dental implantation. Simple blind randomized prospective one-center comparative placebo-controlled clinical trial is carried out on the group of 30 partially edentulous patients. It is proved that the use of LLLT before and after installation of dental implants provides: 1) reliable reduction (by 3.5 times) of the frequency of implication and intensity of pain in the first days after operation; 2) reduction (by 3.3-3.7 times) of frequency, duration and intensity of local edematous and inflammatory processes in peri-implant zone and facial soft tissue edema; 3) effective prophylaxis of postoperative sensory, paresthesia and neurologic disturbances in maxillofacial area.

Using motion capture technology to measure the effects of magnification loupes on dental operator posture: A pilot study.

PubMed

Branson, B G; Abnos, R M; Simmer-Beck, M L; King, G W; Siddicky, S F

2018-01-01

Motion analysis has great potential for quantitatively evaluating dental operator posture and the impact of interventions such as magnification loupes on posture and subsequent development of musculoskeletal disorders. This study sought to determine the feasibility of motion capture technology for measurement of dental operator posture and examine the impact that different styles of magnification loupes had on dental operator posture. Forward and lateral head flexion were measured for two different operators while completing a periodontal probing procedure. Each was measured while wearing magnification loupes (flip up-FL and through the lens-TTL) and basic safety lenses. Operators both exhibited reduced forward flexion range of motion (ROM) when using loupes (TTL or FL) compared to a baseline lens (BL). In contrast to forward flexion, no consistent trends were observed for lateral flexion between subjects. The researchers can report that it is possible to measure dental operator posture using motion capture technology. More study is needed to determine which type of magnification loupes (FL or TTL) are superior in improving dental operator posture. Some evidence was found supporting that the quality of operator posture may more likely be related to the use of magnification loupes, rather than the specific type of lenses worn.

Engines and Innovation: Lewis Laboratory and American Propulsion Technology

NASA Technical Reports Server (NTRS)

Dawson, Virginia Parker

1991-01-01

This book is an institutional history of the NASA Lewis Research Center, located in Cleveland, Ohio, from 1940, when Congress authorized funding for a third laboratory for the National Advisory Committee for Aeronautics, through the 1980s. The history of the laboratory is discussed in relation to the development of American propulsion technology, with particular focus on the transition in the 1940s from the use of piston engines in airplanes to jet propulsion and that from air-breathing engines to rocket technology when the National Aeronautics and Space Administration was established in 1958. The personalities and research philosophies of the people who shaped the history of the laboratory are discussed, as is the relationship of Lewis Research Center to the Case Institute of Technology.

Dental Hygienist.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of dental hygienist, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 9 units specific to the occupation of dental hygienist. The following skill areas are covered in…

Earth Resources Laboratory research and technology

NASA Technical Reports Server (NTRS)

1983-01-01

The accomplishments of the Earth Resources Laboratory's research and technology program are reported. Sensors and data systems, the AGRISTARS project, applied research and data analysis, joint research projects, test and evaluation studies, and space station support activities are addressed.

[Development of novel laboratory technology--Chairmen's introductory remarks].

PubMed

Maekawa, Masato; Ando, Yukio

2012-07-01

The theme of the 58th annual meeting is, "Mission and Challenge of Laboratory Medicine". This symposium is named, "Development of Novel Laboratory Technology" and is held under the joint sponsorship of the Japanese Society of Clinical Chemistry and the Japanese Electrophoresis Society. Both societies have superior skills at developing methodology and technology. The tools used in the lectures are a carbon nanotube sensor, immunochromatography, direct measurement using polyanions and detergents, epigenomic analysis and fluorescent two-dimensional electrophoresis. All of the lectures will be very helpful and interesting.

Mississippi Curriculum Framework for Medical Laboratory Technology Programs (CIP: 51.1004--Medical Laboratory Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the medical laboratory technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Dental Chairside Technique. Student's Manual.

ERIC Educational Resources Information Center

Apfel, Maura; Weaver, Trudy Karlene

This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

Lasers in dental implantology.

PubMed

Martin, Emile

2004-10-01

The parallels in the expansion of implant dentistry and laser dentistry in clinical practice are apparent. As advocates for laser dentistry continue to seek new ways to use the technology and as more practitioners become involved in implant dentistry, it is logical to see the concurrent use of both technologies in clinical practice. This article provides data that clearly support the value of dental lasers in the practice of implant dentistry. The challenge for the practitioner is the same as for any other area of dentistry: knowing when, where, and what armamentarium to use in any given situation. Not all dental laser wavelengths are necessarily useful in every dental implant situation. After clinicians know the characteristics of the wavelengths available to them, the application of the technology to the specific situation certainly is warranted.

Clinical applications of laser therapy on the dental practice

NASA Astrophysics Data System (ADS)

Pinheiro, Antonio L. B.

2004-09-01

Dental practice consists of a series of laboring procedures which demands the use of several types of equipment and materials. Usually patient"s fears brings additional burden to the Dentists. The use of Lasers for treating and diagnosis in Dentistry is quite new comparing to other medical areas. Initially Laser technology was used as an alternative method for treating dental caries in order to substitute the use of the drill. Lately surgical Lasers have shown themselves very useful for treating several pathologies and began to be used as a powerful tool on the treatment of several conditions affecting the maxillofacial complex and later on, the era of the use of Laser therapy began. The advent of the diode Lasers made possible the introduction of small units at the dental office and Laser therapy was used to improve healing and later included also caries diagnosis. This paper discuss the use of Laser therapy on Restorative Dentistry, Periodondology, Oral and Maxillofacial Surgery, Oral implantology and other. Clinical and laboratorial experience has demonstrated that Laser therapy does improve the healing of both mineralized and soft tissues, reduces pain and inflammation, and also reduces both cost and length of the dental treatment.

US Army Research Laboratory (ARL) Robotics Collaborative Technology Alliance 2014 Capstone Experiment

DTIC Science & Technology

2016-07-01

ARL-TR-7729 ● JULY 2016 US Army Research Laboratory US Army Research Laboratory (ARL) Robotics Collaborative Technology Alliance...TR-7729 ● JULY 2016 US Army Research Laboratory US Army Research Laboratory (ARL) Robotics Collaborative Technology Alliance 2014 Capstone...National Robotics Engineering Center, Pittsburgh, PA Robert Dean, Terence Keegan, and Chip Diberardino General Dynamics Land Systems, Westminster

Remote Access to Wireless Communications Systems Laboratory--New Technology Approach

ERIC Educational Resources Information Center

Kafadarova, Nadezhda; Sotirov, Sotir; Milev, Mihail

2012-01-01

Technology nowadays enables the remote access to laboratory equipment and instruments via Internet. This is especially useful in engineering education, where students can conduct laboratory experiment remotely. Such remote laboratory access can enable students to use expensive laboratory equipment, which is not usually available to students. In…

Computing facilities available to final-year students at 3 UK dental schools in 1997/8: their use, and students' attitudes to information technology.

PubMed

Grigg, P; Macfarlane, T V; Shearer, A C; Jepson, N J; Stephens, C D

2001-08-01

To identify computer facilities available in 3 dental schools where 3 different approaches to the use of technology-based learning material have been adopted and assess dental students' perception of their own computer skills and their attitudes towards information technology. Multicentre cross sectional by questionnaire. All 181 dental students in their final year of study (1997-8). The overall participation rate was 80%. There were no differences between schools in the students' self assessment of their IT skills but only 1/3 regarded themselves as competent in basic skills and nearly 50% of students in all 3 schools felt that insufficient IT training had been provided to enable them to follow their course without difficulty. There were significant differences between schools in most of the other areas examined which reflect the different ways in which IT can be used to support the dental course. 1. Students value IT as an educational tool. 2. Their awareness of the relevance of a knowledge of information technology for their future careers remains generally low. 3. There is a need to provide effective instruction in IT skills for those dental students who do not acquire these during secondary education.

Laboratory studies of sweets re-formulated to improve their dental properties.

PubMed

Grenby, T H; Mistry, M

1996-03-01

To evaluate the potential dental effects of ten new types of sugar-free sweets formulated with Lycasin or isomalt as bulk sweeteners instead of sugars. Examination of the sweets for their acidity, fermentability by oral microorganisms, influence on the demineralisation of dental enamel, and their influence on human interdental plaque pH, compared with conventional sugar-containing sweets. The importance of reducing the levels of flavouring acids in the sweets was demonstrated. It was not straightforward to evaluate chocolate products in this system, but the potential benefits of re-formulating fruit gums, lollipops, chew-bars, toffee and fudge with Lycasin or isomalt in place of sugars were shown by determining their reduced acidogenicity and fermentability compared with conventional confectionery. The extent of demineralisation of dental enamel was related to both the acidity and the fermentability of the sweets. Re-formulating sweets with reduced acidity levels and bulk sweeteners not fermentable by dental plaque microorganisms can provide a basis for improving their potential dental effects.

Introductory Industrial Technology I. Laboratory Activities.

ERIC Educational Resources Information Center

Towler, Alan L.; And Others

This guide contains 36 learning modules intended for use by technology teachers and students in grades 7 and 8. Each module includes a student laboratory activity and instructor's resource sheet. Each student activity includes the following: activity topic and overview, challenge statement, objectives, vocabulary/concepts reinforced,…

Introductory Industrial Technology II. Laboratory Activities.

ERIC Educational Resources Information Center

Towler, Alan L.

This guide contains 29 learning modules intended for use by technology teachers and students in grade 8. Each module includes a student laboratory activity and instructor's resource sheet. Each student activity includes the following: activity topic and overview, challenge statement, objectives, vocabulary/concepts reinforced, equipment/supplies,…

FY04 Engineering Technology Reports Laboratory Directed Research and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharpe, R M

2005-01-27

This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2004, and exemplifies Engineering's more than 50-year history of developing the technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. Engineering's investmentmore » in technologies is carried out through two programs, the ''Tech Base'' program and the LDRD program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply technologies to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2004, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the long-term science and technology investments for the Directorate. The Centers represent technologies that have been identified as critical for the present and future work of the Laboratory, and are chartered to develop their

Dental Curriculum Development in Developing Countries.

ERIC Educational Resources Information Center

Phantumvanit, Prathip

1996-01-01

Since establishment of formal dental education in Southeast Asia, changes stemming from research and technology have led to dental curriculum changes. Development of the dental curriculum can be divided into three phases: disease oriented; health oriented; and community oriented. Evolution of these phases is traced in the dental curricula of Laos,…

Surface texture measurement for dental wear applications

NASA Astrophysics Data System (ADS)

Austin, R. S.; Mullen, F.; Bartlett, D. W.

2015-06-01

The application of surface topography measurement and characterization within dental materials science is highly active and rapidly developing, in line with many modern industries. Surface measurement and structuring is used extensively within oral and dental science to optimize the optical, tribological and biological performance of natural and biomimetic dental materials. Although there has historically been little standardization in the use and reporting of surface metrology instrumentation and software, the dental industry is beginning to adopt modern areal measurement and characterization techniques, especially as the dental industry is increasingly adopting digital impressioning techniques in order to leverage CAD/CAM technologies for the design and construction of dental restorations. As dental treatment becomes increasingly digitized and reliant on advanced technologies such as dental implants, wider adoption of standardized surface topography and characterization techniques will become evermore essential. The dental research community welcomes the advances that are being made in surface topography measurement science towards realizing this ultimate goal.

Technology | Frederick National Laboratory for Cancer Research

Cancer.gov

The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies

NASA Technical Reports Server (NTRS)

Lamar, John E.; Cronin, Catherine K.; Scott, Laura E.

2005-01-01

The virtual laboratory is a new technology, based on the internet, that has had wide usage in a variety of technical fields because of its inherent ability to allow many users to participate simultaneously in instruction (education) or in the collaborative study of a common problem (real-world application). The leadership in the Applied Vehicle Technology panel has encouraged the utilization of this technology in its task groups for some time and its parent organization, the Research and Technology Agency, has done the same for its own administrative use. This paper outlines the application of the virtual laboratory to those fields important to applied vehicle technologies, gives the status of the effort, and identifies the benefit it can have on collaborative research. The latter is done, in part, through a specific example, i.e. the experience of one task group.

3D Metal Printing - Additive Manufacturing Technologies for Frameworks of Implant-Borne Fixed Dental Prosthesis.

PubMed

Revilla León, M; Klemm, I M; García-Arranz, J; Özcan, M

2017-09-01

An edentulous patient was rehabilitated with maxillary metal-ceramic and mandibular metal-resin implant-supported fixed dental prosthesis (FDP). Metal frameworks of the FDPs were fabricated using 3D additive manufacturing technologies utilizing selective laser melting (SLM) and electron beam melting (EBM) processes. Both SLM and EBM technologies were employed in combination with computer numerical control (CNC) post-machining at the implant interface. This report highlights the technical and clinical protocol for fabrication of FDPs using SLM and EBM additive technologies. Copyright© 2017 Dennis Barber Ltd.

Application of Stem Cell Technology in Dental Regenerative Medicine.

PubMed

Feng, Ruoxue; Lengner, Chistopher

2013-07-01

In this review, we summarize the current literature regarding the isolation and characterization of dental tissue-derived stem cells and address the potential of these cell types for use in regenerative cell transplantation therapy. Looking forward, platforms for the delivery of stem cells via scaffolds and the use of growth factors and cytokines for enhancing dental stem cell self-renewal and differentiation are discussed. We aim to understand the developmental origins of dental tissues in an effort to elucidate the molecular pathways governing the genesis of somatic dental stem cells. The advantages and disadvantages of several dental stem cells are discussed, including the developmental stage and specific locations from which these cells can be purified. In particular, stem cells from human exfoliated deciduous teeth may act as a very practical and easily accessibly reservoir for autologous stem cells and hold the most value in stem cell therapy. Dental pulp stem cells and periodontal ligament stem cells should also be considered for their triple lineage differentiation ability and relative ease of isolation. Further, we address the potentials and limitations of induced pluripotent stem cells as a cell source in dental regenerative. From an economical and a practical standpoint, dental stem cell therapy would be most easily applied in the prevention of periodontal ligament detachment and bone atrophy, as well as in the regeneration of dentin-pulp complex. In contrast, cell-based tooth replacement due to decay or other oral pathology seems, at the current time, an untenable approach.

Perspectives of dental students and faculty about evidence-based dental practice.

PubMed

Abdelkarim, Ahmad; Sullivan, Donna

2014-12-01

The study aimed at evaluating attitudes and perceptions of dental students and faculty toward evidence-based practice, integration of technology and social media, general practitioners' and specialists' scope of practice, and dental practice rewards and disadvantages. A survey instrument was designed with 10 statements rated on a five-point Likert scale (strongly agree to strongly disagree) and an optional comment section. The survey instrument was delivered through SurveyMonkey, whereby 401 students and 182 faculty members from ten U.S. dental schools participated (16% estimated response rate). Null hypotheses regarding the equality between the responses of the two groups were statistically tested using Mann-Whitney U test. Statistical significance was set at .05. Evidence-based practice is positively perceived by both groups, but with significantly higher support by faculty than students (P = 0.002). Both groups agreed that technological advancements are advantageous (P = 0.95), but do not constitute good dentistry and cannot mask poor clinical skills. Students showed higher support for social media than faculty (P = 0.000). Both groups perceived group practices positively. Faculty members showed higher agreement than students toward limitation of dental specialists' practices to their specialties (P = 0.000). Both groups are aware of practice disadvantages, such as increased litigation, health risks, and detriment to the dentist's posture. However, they both perceive dental practice positively despite all these challenges. Students and faculty share generally comparable perspectives toward dental practice. They are both in agreement with evidence-based practice and adoption of technology. They both acknowledge practice limitations. Copyright © 2014 Elsevier Inc. All rights reserved.

Content and goals of preclinical prosthodontic programs at german-language dental schools.

PubMed

Hey, Jeremias; Stimmelmayr, Michael; Hirsch, Christian; Beuer, Florian

2014-04-01

The Association for Dental Education in Europe (ADEE) makes recommendations regarding the skills graduates of European dental schools need to achieve and advises dental schools regarding necessary changes to be made to the curriculum. In 2010 to 2011, a survey was conducted in German-language dental schools to validate the curricula and goals of preclinical prosthodontic programs with regard to laboratory work. The survey was mailed to the course instructors of the preclinical programs at 37 dental schools. Of these, 35 schools returned the completed survey, resulting in a response rate of 95%. Bent wire, wax-up exercises, metal-ceramic single crowns, fixed dental prostheses, cast metal single crowns, temporary removable dental prostheses, and full dentures were part of the dental laboratory work at most schools; however, most instructors considered laboratory work as less important, and there were few similarities among the programs in this area. According to the instructors responsible for preclinical education, honing of fine motor skills, realistic self-assessment, and the ability to work independently were the main goals of the programs. The results of this survey show that with regard to laboratory work, there were more differences than similarities among preclinical prosthodontic programs at German-language dental schools, contrary to the recommendations of the ADEE. These findings should be taken into account when program reforms are planned. © 2013 by the American College of Prosthodontists.

American Academy of Dental Sleep Medicine

MedlinePlus

... Coverage New Research AADSM Highlights Members More news... Dental Sleep Medicine: An area of dental practice that focuses on the use of oral ... News RSS Links Find A Dentist Platinum Sponsors Dental Sleep Solutions Nierman Practice Management ProSomnus Sleep Technologies ...

Dental care providers' and patients' perceptions of the effect of health information technology in the dental care setting.

PubMed

Asan, Onur; Ye, Zhan; Acharya, Amit

2013-09-01

The use of electronic health records (EHRs) in dental care and their effect on dental care provider-patient interaction have not been studied sufficiently. The authors conducted a study to explore dental care providers' interactions with EHRs during patient visits, how these interactions influence dental care provider-patient communication, and the providers' and patients' perception of EHR use in the dental clinic setting during patient visits. The authors collected survey and interview data from patients and providers at three dental clinics in a health care system. The authors used qualitative and quantitative methods to analyze data obtained from patients and dental care providers. The provider survey results showed significant differences in perceptions of EHR use in patient visits across dental care provider groups (dentists, dental hygienists and dental assistants). Patient survey results indicated that some patients experienced a certain level of frustration and distraction because of providers' use of EHRs during the visit. The provider survey results indicated that there are different perceptions across provider groups about EHRs and the effect of computer use on communication with patients. Dental assistants generally reported more negative effects on communication with patients owing to computer use. Interview results also indicated that dental care providers may not feel comfortable interacting with the EHR without having any verbal or eye contact with patients during the patient's dental visit. A new design for dental operatories and locations of computer screens within the operatories should be undertaken to prevent negative nonverbal communication such as loss of eye contact or forcing the provider and patient to sit back to back, as well as to enhance patient education and information sharing.

Evaluation of the physical properties of dental resin composites using optical fiber sensing technology.

PubMed

Rajan, Ginu; Shouha, Paul; Ellakwa, Ayman; Bhowmik, Kishore; Xi, Jiangtao; Prusty, Gangadhara

2016-09-01

The characterization of the physical properties of dental resin composites is fraught with difficulties relating to significant intra and inter test parameter variabilities and is relatively time consuming and expensive. The main aim of this study was to evaluate whether optical fiber Bragg grating (FBG) sensing system may become a viable tool to study dental material characteristics. Of particular focus was the potential for the system to demonstrate a multi parameter all-in-one feature. A miniature FBG was embedded in six different dental resin composites and employed as a sensor to evaluate linear polymerization shrinkage, thermal expansion and water sorption. Six commercially available dental composites with different filler types and volume are evaluated. The tests are repeated with three sets of samples. The curing characteristics and residual strain gradient exhibited by the cured dental composites were also observed and commented. Among the studied samples, SDR shows lowest polymerization shrinkage, while Beautifil FO3 shows the highest. The results also show clear distinction between particle filler type and fiber reinforcement based composites in their polymerization shrinkage properties. The agreement of the results with existing literatures show that FBG based system provides accurate results. Polymerization shrinkage rate of the samples are also obtained. Thermal expansion of the composites are measured using the FBG sensing method for the first time and is correlated with resin type, volume, filler type and glass transition temperature. The water sorption characteristics of the dental composite are also successfully measured using the FBG sensing method. The high level of repeatability and the low standard deviations shown in the results indicate good reliability with the use of FBG sensors. This study demonstrates how optical fiber technology can provide simple and reliable methods of measuring the critical physical properties of dental composites

Laboratory tests for assessing adaptability and stickiness of dental composites.

PubMed

Rosentritt, Martin; Buczovsky, Sebastian; Behr, Michael; Preis, Verena

2014-09-01

Handling (stickiness, adaptability) of a dental composite does strongly influence quality and success of a dental restoration. The purpose was to develop an in vitro test, which allows for evaluating adaptability and stickiness. 15 dentists were asked for providing individual assessment (school scores 1-6) of five dental composites addressing adaptability and stickiness. Composites were applied with a dental plugger (d=1.8 mm) in a class I cavity (human tooth 17). The tooth was fixed on a force gauge for simultaneous determination of application forces with varying storage (6/25°C) and application temperatures (6/25°C). On basis of these data tensile tests were performed with a dental plugger (application force 1N/2N; v=35 mm/min) on PMMA- or human tooth plates. Composite was dosed onto the tip of the plugger and applied. Application and unplugging was performed once and unplugging forces (UF) and length of the adhesive flags (LAF) were determined at different storage (6/25°C) and application temperatures (25/37°C). Unplugging work (UW) was calculated from area of UF and LAF data. The individual assessment revealed significantly different temperature-dependent application forces between 0.58 N and 2.23 N. Adaptability was assessed between 2.1 and 2.8 school scores. Stickiness varied significantly between the materials (scores: 2-3.2). UW differed significantly between the materials with values between 3.20 N mm and 37.83 N mm. Between PMMA substrate or tooth slides and between 1N or 2N application force only small UW differences were found. The presented in vitro unplugging work allows for an in vitro estimation of the handling parameters adaptability and stickiness. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Dental Assistants, Technicians and Hygienists. Career Focus, volume 5, no. 1.

ERIC Educational Resources Information Center

Reese, Susan

2003-01-01

Includes three articles: "Lending a Hand for Good Dental Health,""A Promising Career Path," and "Dental Laboratory Technicians." Describes careers related to the dental field and the dental programs at various career centers, community colleges, and universities. (JOW)

Emerging Technologies for the Clinical Microbiology Laboratory

PubMed Central

Buchan, Blake W.

2014-01-01

SUMMARY In this review we examine the literature related to emerging technologies that will help to reshape the clinical microbiology laboratory. These topics include nucleic acid amplification tests such as isothermal and point-of-care molecular diagnostics, multiplexed panels for syndromic diagnosis, digital PCR, next-generation sequencing, and automation of molecular tests. We also review matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry methods and their role in identification of microorganisms. Lastly, we review the shift to liquid-based microbiology and the integration of partial and full laboratory automation that are beginning to impact the clinical microbiology laboratory. PMID:25278575

Creation of a scholars program in dental leadership (SPDL) for dental and dental hygiene students.

PubMed

Taichman, Russell S; Green, Thomas G; Polverini, Peter J

2009-10-01

There is a great need for leaders in the dental profession. As technological advances make our world smaller and our lives faster and more complex, we as a profession face challenges and opportunities that are evolving. Many of the changes in the scope and mode of practice will require new and different approaches. Meeting these challenges will require changes in how we as dental professionals do business; interact with our patients, other stakeholders, and health care providers; and educate our future colleagues. The purposeful incorporation of leadership education into dental and dental hygiene curricula represents an important departure from existing paradigms-but will help prepare our students to address these challenges. This article provides an overview of the development of a Scholars Program in Dental Leadership (SPDL) at the University of Michigan School of Dentistry. Our aim for the program is to create a learning environment that fosters leadership development, so that students are prepared and motivated to assume leadership positions in the profession and their communities.

Undergraduate dental English education in Japanese dental schools.

PubMed

Rodis, Omar M M; Matsumura, Seishi; Kariya, Naoyuki; Nishimura, Michiko; Yoshida, Toshiko

2013-05-01

Dental schools in Japan are among many worldwide whose medium of instruction is not in English. With advances in science, technology, and communication, the demand for the globalization of professions increases. At present, dental schools in Asia, the Middle East, and Europe have started revising their dental curricula to either include English courses for dentistry or offer a full English dental curriculum. In Japan, dental English courses started to be introduced into curricula in the early 1990s. However, a survey conducted in 1999 found that English courses were not offered in Japan's twenty-nine dental schools and there was no consensus as to what such courses should include or when and how they should be taught. Ten years after that survey, the survey results reported in this article found that the problems reported in the 1999 survey still exist. Additionally, there are still differences among schools offering English courses in terms of the timing and contents of the courses. Since teachers and school officials will have an important role in curriculum development, this article recommends that a fact-finding meeting with educators, school, and education officials be initiated to discuss, develop, and implement a core curriculum for these dental English courses.

Theater of Operations Dental Work Load Estimation

DTIC Science & Technology

1984-05-01

such as clinical dental work, forensic dental identification, civic action ’programs, treatment of prisoners of war, dental laboratory services, medical...SED 193 0.3 115.8 0.2 9233 INHAL SED ANALGESIA 4085 7.0 3268.0 5.6 񕐲 ORAL SED 994 107 298.2’ 0.5 9235 HYPNOSIS 58 0.1 52.2 0.1 9610 THERAP MED

Dental technician pneumoconiosis mimicking pulmonary tuberculosis: a case report.

PubMed

Tan, Han Loong; Faisal, Mohamed; Soo, Chun Ian; Ban, Andrea Y L; Manap, Roslina Abdul; Hassan, Tidi M

2016-09-07

Dental laboratory technicians are at risk of developing occupational respiratory diseases due to exposure to various potentially toxic substances in their working environment. Since 1939, few cases of silicosis among dental technician have been reported. We illustrate a 38 year-old female, who worked in a dental laboratory for 20 years, initially treated as pulmonary tuberculosis and chronic necrotising aspergillosis without much improvement. Computed tomography guided lung biopsy and bronchoscopic transbronchial lung biopsy were performed. Lung tissue biopsies showed presence of refractile dental materials within the areas of histiocyte proliferation. The diagnosis of dental technician pneumoconiosis was obtained and our patient underwent pulmonary rehabilitation. This case highlights the importance of obtaining a detailed occupational history in tuberculosis endemic area, as pulmonary tuberculosis is a great mimicker of other respiratory diseases.

Properties of maltodextrins and glucose syrups in experiments in vitro and in the diets of laboratory animals, relating to dental health.

PubMed

Grenby, T H; Mistry, M

2000-10-01

The objective of the study was to examine the cariogenic potentials of maltodextrins and glucose syrups (two glucose polymers derived from starch) using a range of techniques in vitro and in laboratory animals. The experimental methods used were: (1) measurement of acid production from glucose syrups and maltodextrins by human dental plaque micro-organisms; (2) evaluation of the role salivary alpha-amylase in degrading oligosaccharides (degree of polymerisation > 3) in the glucose polymers, estimating the products by HPLC; (3) assessment of the fermentability of trioses relative to maltose; (4) measurement of dental caries levels in three large-scale studies in laboratory rats fed on diets containing the glucose polymers. It was found that acid production from the glucose polymers increased as their higher saccharide content fell. Salivary alpha-amylase rapidly degraded the oligosaccharides (degree of polymerisation > 3), mainly to maltose and maltotriose. In the presence of oral micro-organisms, maltotriose took longer to ferment than maltose, but by the end of a 2 h period the total amount of acid produced was the same from both. Incorporated into the diets in solid form, the glucose syrups and maltodextrins were associated with unexpectedly high levels of dental caries. In conclusion, the findings were unforeseen in the light of earlier data that a glucose syrup was less cariogenic than sucrose.

Understanding dental CAD/CAM for restorations - dental milling machines from a mechanical engineering viewpoint. Part A: chairside milling machines.

PubMed

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

The dental milling machine is an important device in the dental CAD/CAM chain. Nowadays, dental numerical controlled (NC) milling machines are available for dental surgeries (chairside solution). This article provides a mechanical engineering approach to NC milling machines to help dentists understand the involvement of technology in digital dentistry practice. First, some technical concepts and definitions associated with NC milling machines are described from a mechanical engineering viewpoint. The technical and economic criteria of four chairside dental NC milling machines that are available on the market are then described. The technical criteria are focused on the capacities of the embedded technologies of these milling machines to mill both prosthetic materials and types of shape restorations. The economic criteria are focused on investment costs and interoperability with third-party software. The clinical relevance of the technology is assessed in terms of the accuracy and integrity of the restoration.

Interprofessional Education Perceptions of Dental Assisting and Radiologic Technology Students Following a Live Patient Experience.

PubMed

Reddington, Amanda R; Egli, Amy J; Schmuck, Heather M

2018-05-01

Health professions students are often unaware of other health care providers' roles or professional expertise due to most education taking place within their single profession. This pattern may be even more prevalent for baccalaureate and associate degree programs since most interprofessional education (IPE) occurs in predoctoral programs and, when IPE is incorporated into allied health professions education, it often utilizes simulation instead of live patient experiences. The aim of this study was to determine if radiologic technology and dental assisting students' perceptions changed regarding interprofessional practice and teamwork after an IPE activity with actual patients. The participants were students in the University of Southern Indiana (USI) radiologic technology and dental assisting programs. This mixed-methods pilot study conducted in 2017 collected quantitative and qualitative data from pre and post surveys, the researchers' observations of student interactions during live patient assessment and acquisition of panoramic images, and large-group discussion. Twenty-five of the 26 students who participated in the IPE program completed both pre and post surveys, for a 96% response rate. The results showed significant differences in the participants' perceptions from the pre to post surveys on a wide variety of survey items. Most notable were the positive changes in perceptions related to trust in judgment of others within their profession (p=0.001), relationships with other professions (p=0.002), and thinking highly of other professions (p=0.002). Overall, this study found that incorporating the IPE activity with a live patient into these radiologic technology and dental assisting programs improved the students' perceptions of other allied health professionals. Future research should include more participants to increase sample size and add quantitative data collection.

Dental occlusion ties: A rapid, safe, and non‐invasive maxillo‐mandibular fixation technology

PubMed Central

2017-01-01

Objectives For decades, Erich arch bars have been a standard in establishing maxillo‐mandibular fixation (MMF). While reliable, the approach risks sharps injury, consumes operating room time, and inflicts gingival trauma. Newer technologies including screw‐based techniques and “hybrid” techniques have improved MMF by reducing sharps injuries and operating room time, but risk injury to tooth roots, nerves, and gingiva. This study aims to establish the application, strengths, and limitations of dental occlusion ties as a novel alternative in maxillo‐mandibular fixation. Study Design Prospective, non‐blinded, human feasibility clinical trial. Materials and Methods An iterative prototyping process was used to invent dental occlusion ties (brand name: Minne Ties). Development included 3D printing, cadaver prototype testing, human apical embrasure measurement, and ultimately non‐significant risk human clinical trial testing. In the IRB‐approved feasibility clinical trial, the devices were applied to mandible and maxilla fracture candidates with fractures amenable to intra‐operative MMF with open reduction with internal fixation. The ties were removed prior to extubation. Pre‐teens, comminuted fracture patients, and patients requiring post‐operative MMF were excluded. Results Manufactured, sterile prototypes secured MMF successfully in management of unilateral and bilateral mandible and maxilla fractures. All patients reported correction of pre‐operative malocclusion. Application times were typically 12–15 minutes for a single surgeon to achieve MMF. Patients incurred negligible gingival trauma from the technology as the ties require no tissue penetration for application. Conclusions Dental occlusion ties offer a non‐invasive solution featuring operating room efficiency, minimized sharps risk, and less bony and soft tissue trauma than current commercialized solutions. Level of Evidence Therapeutic, IV PMID:28894837

Geometry Laboratory (GEOLAB) surface modeling and grid generation technology and services

NASA Technical Reports Server (NTRS)

Kerr, Patricia A.; Smith, Robert E.; Posenau, Mary-Anne K.

1995-01-01

The facilities and services of the GEOmetry LABoratory (GEOLAB) at the NASA Langley Research Center are described. Included in this description are the laboratory functions, the surface modeling and grid generation technologies used in the laboratory, and examples of the tasks performed in the laboratory.

76 FR 67154 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory... to eight legacy Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration (demo) Project Plans resulting from section 1107(c) of the National Defense Authorization Act...

26 CFR 1.213-1 - Medical, dental, etc., expenses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 3 2012-04-01 2012-04-01 false Medical, dental, etc., expenses. 1.213-1 Section... (CONTINUED) INCOME TAXES (CONTINUED) Additional Itemized Deductions for Individuals § 1.213-1 Medical, dental... (including nurses' board where paid by the taxpayer), medical, laboratory, surgical, dental and other...

26 CFR 1.213-1 - Medical, dental, etc., expenses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 3 2014-04-01 2014-04-01 false Medical, dental, etc., expenses. 1.213-1 Section... (CONTINUED) INCOME TAXES (CONTINUED) Additional Itemized Deductions for Individuals § 1.213-1 Medical, dental... (including nurses' board where paid by the taxpayer), medical, laboratory, surgical, dental and other...

26 CFR 1.213-1 - Medical, dental, etc., expenses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 3 2013-04-01 2013-04-01 false Medical, dental, etc., expenses. 1.213-1 Section... (CONTINUED) INCOME TAXES (CONTINUED) Additional Itemized Deductions for Individuals § 1.213-1 Medical, dental... (including nurses' board where paid by the taxpayer), medical, laboratory, surgical, dental and other...

A Technological Acceptance of Remote Laboratory in Chemistry Education

ERIC Educational Resources Information Center

Ling, Wendy Sing Yii; Lee, Tien Tien; Tho, Siew Wei

2017-01-01

The purpose of this study is to evaluate the technological acceptance of Chemistry students, and the opinions of Chemistry lecturers and laboratory assistants towards the use of remote laboratory in Chemistry education. The convergent parallel design mixed method was carried out in this study. The instruments involved were questionnaire and…

Prevalence of TMJ Disorders among the Patients Attending the Dental Clinic of Ajman University of Science and Technology-Fujairah Campus, UAE.

PubMed

AlShaban, Kashef K; Gul Abdul Waheed, Zainab

2018-01-01

The objective of this study was to determine the prevalence of temporomandibular joint (TMJ) disorders (if any) among the patients attending the dental clinic (for routine dental treatment) of Ajman University of Science and Technology (AUST)-Fujairah campus, UAE, and its possible causes. A sample of 100 adult patients attending the dental clinic of AUST for different types of dental treatment were collected; the routine examination of the TMJ and possible disorders such as clicking, crepitation, limitation or deviation during mouth opening, or tenderness reveals that 41% of the sample experience varying degrees of disorders in the TMJ. Radiographs were taken if needed (panoramic radiograph). The information was collected and recorded for each patient through questionnaires.

Effects of combining CBCT technology with visual root canal recurrence in treatment of elderly patients with dental pulp disease.

PubMed

Cui, J-J; Peng, B; Lin, W

2017-03-01

The aim of this study is to analyze the effects of combining cone beam computed tomography (CBCT) technology with visual root canal recurrence in the treatment of elderly patients with dental pulp disease. 56 cases of elderly patients with dental pulp disease were contiguously selected, and randomly divided into the control group (70 teeth from 27 patients) and the observation group (77 teeth from the rest 29 patients). We adopted CBCT technology combined with conventional root canal therapy in control group and CBCT technology combined with visual root canal recurrence in observation group to compare the clinical effects. It was found that there was no statistical difference in duration of operation between the two groups (p>0.05). The operation times and the VAS during and after operation of the observation group were significantly less than that of the control group (p<0.05). The duration of follow-up of the two groups was both about 18 months. Successful rates of treatment for 6 months and by the end of follow-up visit in the observation group were both significantly higher than those in the control group (p<0.05). The correct filling rate, good filling rate and fair filling rate in the observation group were significantly higher than those of the control group (p<0.05). CBCT technology combined with visual root canal recurrence can significantly improve the near and long-term treatment effects of elderly patients with dental pulp disease.

Implementation of a laboratory quality assurance program: the Louisville experience.

PubMed

Metz, Michael J; Abdel-Azim, Tamer; Miller, Cynthia J; Lin, Wei-Shao; ZandiNejad, Amirali; Oliveira, Gustavo M; Morton, Dean

2014-02-01

Remakes, or the refabrication of dental prostheses, can occur as a result of inherent inaccuracies in both clinical and laboratory procedures. Because dental schools manage large numbers of predoctoral dental students with limited familiarity and expertise as related to clinical prosthodontic techniques, it is likely these schools will experience an elevated incidence of laboratory remakes and their ramifications. The University of Louisville School of Dentistry, not unlike other dental schools, has experienced remakes associated with both fixed and removable prosthodontic procedures. Limitations in faculty standardization and variable enforcement of established preclinical protocols have been identified as variables associated with the high percentage of remakes documented. The purpose of this study was to introduce the implementation of a new multidepartmental quality assurance program designed to increase consistency and quality in both information provided to commercial dental laboratories and the prostheses returned. The program has shown to be advantageous in terms of cost-effectiveness and treatment outcomes. A statistically significant decrease in remake percentages has been recorded from inception of this program in December 2010 until December 2012. Furthermore, this program has resulted in more consistent communication between the dental school and commercial dental laboratories, among faculty members, and between faculty and students.

[Manufacture method and clinical application of minimally invasive dental implant guide template based on registration technology].

PubMed

Lin, Zeming; He, Bingwei; Chen, Jiang; D u, Zhibin; Zheng, Jingyi; Li, Yanqin

2012-08-01

To guide doctors in precisely positioning surgical operation, a new production method of minimally invasive implant guide template was presented. The mandible of patient was scanned by CT scanner, and three-dimensional jaw bone model was constructed based on CT images data The professional dental implant software Simplant was used to simulate the plant based on the three-dimensional CT model to determine the location and depth of implants. In the same time, the dental plaster models were scanned by stereo vision system to build the oral mucosa model. Next, curvature registration technology was used to fuse the oral mucosa model and the CT model, then the designed position of implant in the oral mucosa could be determined. The minimally invasive implant guide template was designed in 3-Matic software according to the design position of implant and the oral mucosa model. Finally, the template was produced by rapid prototyping. The three-dimensional registration technology was useful to fuse the CT data and the dental plaster data, and the template was accurate that could provide the doctors a guidance in the actual planting without cut-off mucosa. The guide template which fabricated by comprehensive utilization of three-dimensional registration, Simplant simulation and rapid prototyping positioning are accurate and can achieve the minimally invasive and accuracy implant surgery, this technique is worthy of clinical use.

SITE TECHNOLOGY CAPSULE; MULTI-VENDOR BIOREMEDIATION DEMONSTRATION PROJECT: ENVIRONMENTAL LABORATORIES/SBP TECHNOLOGIES' UVB VACUUM VAPORIZATION WELL PROCESS

EPA Science Inventory

This technology capsule summarizes the findings of an evaluation of the Unterdruck-Verdampfer-Brunnen (UVB) technology developed by IEG Technologies (IEG) and licensed in the eastern United States by Environmental Laboratories, Inc. (ELI) and SBP Technologies, Inc. (SBP). This e...

A Laboratory-Based Course in Display Technology

ERIC Educational Resources Information Center

Sarik, J.; Akinwande, A. I.; Kymissis, I.

2011-01-01

A laboratory-based class in flat-panel display technology is presented. The course introduces fundamental concepts of display systems and reinforces these concepts through the fabrication of three display devices--an inorganic electroluminescent seven-segment display, a dot-matrix organic light-emitting diode (OLED) display, and a dot-matrix…

SANDIA NATIONAL LABORATORIES IN SITU ELECTROKINETIC EXTRACTION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

As a part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated the In-Situ Electrokinetic Extraction (ISEE) system at Sandia National Laboratories, Albuquerque, New Mexico.

The SITE demonstration results show ...

Dosimetric considerations in dental applications

NASA Technical Reports Server (NTRS)

Goble, J. C.

1978-01-01

The integration of the Lixiscope into dental procedures was studied and compared with conventional dental radiographic techniques. It was found that through the use of intraoral sealed sources in conjunction with microchannel plate technology, the Lixiscope gives increased diagnostic information with decreased radiation dosage.

Incorporating digital imaging into dental hygiene practice.

PubMed

Saxe, M J; West, D J

1997-01-01

The objective of this paper is to describe digital imaging technology: available modalities, scientific imaging process, advantages and limitations, and applications to dental hygiene practice. Advances in technology have created innovative imaging modalities for intraoral radiography that eliminate film as the traditional image receptor. Digital imaging generates instantaneous radiographic images on a display monitor following exposure. Advantages include lower patient exposure per image and elimination of film processing. Digital imaging enhances diagnostic capabilities and, therefore, treatment decisions by the oral healthcare provider. Utilization of digital imaging technology for intraoral radiography will advance the practice of dental hygiene. Although spatial resolution is inferior to conventional film, digital imaging provides adequate resolution to diagnose oral diseases. Dental hygienists must evaluate new technologies in radiography to continue providing quality care while reducing patient exposure to ionizing radiation.

Laboratory 3.0: Manufacturing Technologies Laboratory Virtualization with a Student-Centred Methodology

ERIC Educational Resources Information Center

Fabregat-Sanjuan, Albert; Pàmies-Vilà, Rosa; Ferrando Piera, Francesc; De la Flor López, Silvia

2017-01-01

This paper presents a blended-learning strategy for improving the teaching method applied in the laboratory subject Manufacturing Technologies. The teaching method has been changed from a predominantly teacher-centred to an active learning system with a student-centred focus and e-learning activities. In face-to-face classes, a game-based learning…

E-Laboratory Design and Implementation for Enhanced Science, Technology and Engineering Education

ERIC Educational Resources Information Center

Morton, William; Uhomoibhi, James

2011-01-01

Purpose: This paper aims to report on the design and implementation of an e-laboratory for enhanced science, technology and engineering education studies. Design/methodology/approach: The paper assesses a computer-based e-laboratory, designed for new entrants to science, technology and engineering programmes of study in further and higher…

Evaluation of the PotoClean® decontamination technology for reprocessing of water supply lines in dental units during routine work

PubMed Central

Kramer, Axel; Koburger, Torsten; Taube, Lisa-Dorothea; Menzel, Michael; Meyer, Georg; Assadian, Ojan

2012-01-01

Background: A frequent problem in dental units is the microbial contamination of water and biofilm formation in the water supply lines. After random identification of a bacterial contaminated dental unit (310 cfu/ml) in a practise with 3 dental units we implemented the present study to evaluate the efficacy of the PotoClean® technology, based on anodic oxidation. Method: The efficacy of a regular low concentrated permanent decontamination (1 mg Cl/L) with an additional intensive decontamination by PotoClean® (three times 20 mg Cl/ml for 2 h) on three dental units was tested over 7 months. Microbial contamination, total chlorine concentration and redox potential have been analyzed. Dental unit A and B was 15 years old, unit C 5 years. Results: After 3 intensive decontaminations, in dental unit A and B the number of bacteria and moulds could be reduced less than 7 d. Thereafter the bacteria counts increased again during the subsequent 7 month period and the amount of moulds was with some exceptions 300 cfu/ml, although PotoClean® was constantly added in the system (1 mg Cl/L). After further 7.5 month only with low concentrated permanent disinfection (1 mg Cl/L) both units were successful decontaminated. Dental unit C represented an object which was easier to decontaminate because of the advanced construction (prevention of water stagnation) and the shorter useful life. At the beginning of the decontamination it was no bacterial contamination, but moulds were contained (300 cfu/ml). Already after the first intensive decontamination, no further bacteria and moulds could be detected. Discussion: An important factor for the efficacy of PotoClean® was the age of the units and their construction. For a new generation of dental units PotoClean® was effective during the whole period of monitoring. For two old types of dental unit with massive biofilm development the successful decontamination needed more than 7 month. Conclusion: The PotoClean® technology has resulted

Evaluation of the PotoClean(®) decontamination technology for reprocessing of water supply lines in dental units during routine work.

PubMed

Kramer, Axel; Koburger, Torsten; Taube, Lisa-Dorothea; Menzel, Michael; Meyer, Georg; Assadian, Ojan

2012-01-01

A frequent problem in dental units is the microbial contamination of water and biofilm formation in the water supply lines. After random identification of a bacterial contaminated dental unit (310 cfu/ml) in a practise with 3 dental units we implemented the present study to evaluate the efficacy of the PotoClean(®) technology, based on anodic oxidation. The efficacy of a regular low concentrated permanent decontamination (1 mg Cl/L) with an additional intensive decontamination by PotoClean(®) (three times 20 mg Cl/ml for 2 h) on three dental units was tested over 7 months. Microbial contamination, total chlorine concentration and redox potential have been analyzed. Dental unit A and B was 15 years old, unit C 5 years. After 3 intensive decontaminations, in dental unit A and B the number of bacteria and moulds could be reduced less than 7 d. Thereafter the bacteria counts increased again during the subsequent 7 month period and the amount of moulds was with some exceptions 300 cfu/ml, although PotoClean(®) was constantly added in the system (1 mg Cl/L). After further 7.5 month only with low concentrated permanent disinfection (1 mg Cl/L) both units were successful decontaminated. Dental unit C represented an object which was easier to decontaminate because of the advanced construction (prevention of water stagnation) and the shorter useful life. At the beginning of the decontamination it was no bacterial contamination, but moulds were contained (300 cfu/ml). Already after the first intensive decontamination, no further bacteria and moulds could be detected. An important factor for the efficacy of PotoClean(®) was the age of the units and their construction. For a new generation of dental units PotoClean(®) was effective during the whole period of monitoring. For two old types of dental unit with massive biofilm development the successful decontamination needed more than 7 month. The PotoClean(®) technology has resulted in even old-type turbines with intensive

Mobile Technology Education Laboratory: An Alternative for Elementary Technology Education in a Restructuring School District in Central California.

ERIC Educational Resources Information Center

Britton, Steven M.

The purpose of this study was to explore what options exist for a school district that has chosen to implement or reinforce an elementary technology education program. The option selected was a mobile technology education laboratory. A mobile laboratory can offer the advantages of financial flexibility, currentness, ability to serve a large…

Nanoscience and Technology at the Air Force Research Laboratory (AFRL)

DTIC Science & Technology

2005-05-01

AIR FORCE RESEARCH LABORATORY ( AFRL ) Dr. Richard A. Vaia Dr. Daniel Miracle Dr. Thomas Cruse Air Force Research ...Technology At The Air Force Research Laboratory ( AFRL ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...98) Prescribed by ANSI Std Z39-18 AFRL NST Overview 2 AIR FORCE RESEARCH LABORATORY VISION We defend

Nanoscience and Technology at the Air Force Research Laboratory (AFRL)

DTIC Science & Technology

2005-02-01

AIR FORCE RESEARCH LABORATORY ( AFRL ) Dr. Richard A. Vaia Dr. Daniel Miracle Dr. Thomas Cruse Air Force Research ...Technology At The Air Force Research Laboratory ( AFRL ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...98) Prescribed by ANSI Std Z39-18 AFRL NST Overview 2 AIR FORCE RESEARCH LABORATORY VISION We defend

Frederick National Laboratory Scientists to Present Advanced Technologies in Cancer Research | Frederick National Laboratory for Cancer Research

Cancer.gov

FREDERICK, Md. -- Hundreds of science and business professionals are expected to attend the second annual Technology Showcase at the Frederick National Laboratory for Cancer Research, scheduled for June 13.  The event will feature technologies bei

[Investigation of dental manpower in non-public dental institutions in Liaoning province].

PubMed

Liu, Lu; Zhang, Ying; Cheng, Rui-bo; Xu, Yan-mei; Lu, Zhen-fu

2013-10-01

To investigate the non-public oral medical institutions in Liaoning province in 2011, and to analyze the status of dental manpower in non-public dental institutions in Liaoning province. A mass survey on dental manpower was made in non-public dental institutions in Liaoning province in 2011 by means of questionnaire investigation, which included the institution type, dental devices, and the number, structure, composition, distribution of dental manpower in non-public dental institutions in Liaoning province. Data was entered with EpiData 3.0 and analyzed with SPSS 13.0 software package. There were 1649 non-public dental institutions with 3132 dentists, 1265 nurses, 540 technicians and 3490 dental chairs in Liaoning province. 85.69% of the dental manpower were young and middle-aged. 33.17% of the dentists had primary professional titles, 42.53% of them had college degree and 87.96% of the dentists was general dentistry. In the dental auxiliaries, the primary professional title accounted for the majority. 95.97% of the nurses majored in general dentistry and 60.40% of the nurses' educational background were below junior college degree. 72.59% of the technicians majored in prosthetic dentistry and 67.78% of their educational background were below junior college degree. The ratio of the dentists to nurses to technicians was 6:2:1. The ratio of the nurses to dental chairs was 1:2.76. The distribution and composition of dental manpower are not reasonable in non-public dental institutions in Liaoning province. We should strengthen effective utilization of oral health resources and the oral health service ability of non -public dental institutions in Liaoning province. Supported by Key Science and Technology Projects of Liaoning Province (2012225015).

Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

PubMed

Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

2016-01-01

The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

Ergonomic design for dental offices.

PubMed

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Brookhaven National Laboratory technology transfer report, fiscal year 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-01-01

The Brookhaven Office of Research and Technology Applications (ORTA) inaugurated two major initiatives. The effort by our ORTA in collaboration with the National Synchrotron Light Source (NSLS) has succeeded in alerting American industry to the potential of using a synchrotron x-ray source for high resolution lithography. We are undertaking a preconstruction study for the construction of a prototype commercial synchrotron and development of an advanced commercial cryogenic synchrotron (XLS). ORTA sponsored a technology transfer workshop where industry expressed its views on how to transfer accelerator technology during the construction of the prototype commercial machine. The Northeast Regional utility Initiative broughtmore » 14 utilities to a workshop at the Laboratory in November. One recommendation of this workshop was to create a Center at the Laboratory for research support on issues of interest to utilities in the region where BNL has unique capability. The ORTA has initiated discussions with the New York State Science and Technology Commission, Cornell University's world renowned Nannofabrication Center and the computer aided design capabilities at SUNY at Stony Brook to create, centered around the NSLS and the XLS, the leading edge semiconductor process technology development center when the XLS becomes operational in two and a half years. 1 fig.« less

Sodium-sulfur technology evaluation at Argonne National Laboratory

NASA Astrophysics Data System (ADS)

Mulcahey, T. P.; Tummillo, A. F.; Hogrefe, R. L.; Christianson, C. C.; Biwer, R.; Webster, C. E.; Lee, J.; Miller, J. F.; Marr, J. J.; Smaga, J. A.

The Analysis and Diagnostics Laboratory (ADL) at Argonne National Laboratory has completed evaluation of the Ford Aerospace and Communication Corp. (FACC) technology in the form of four load-levelling (LL) cells, five electric vehicle (EV) cells, and a sub-battery of 89 series connected EV cells. The ADL also has initiated evaluation of the Chloride Silent Power Limited (CSPL) sodium-sulfur (PB) battery technology in the form of 8 individual cells. The evaluation of the FACC-LL cells consisted of an abbreviated performance characterization followed by life-cycle tests on two individual cells and life-cycle tests only on the two other individual cells. The evaluation indicated that the technology was improving, but long-term (life) reliability was not yet adequate for utility applications. The cells exhibited individual cycle lives ranging from 659 to over 1366 cycles, which is equivalent to 2 1/2 to 5 1/2 years in utility use. It was also found that full-cell capacity could only be maintained by applying a special charge regime, regularly or periodically, that consisted of a constant-current followed by a constant-voltage.

Laboratory evaluation of anti-biofilm agents for use in dental unit waterlines.

PubMed

Meiller, T F; Kelley, J I; Baqui, A A; DePaola, L G

2001-01-01

Dental unit waterline biofilm has been recognized as a potential point of contamination and a risk to patients with any level of immunocompromise. Biofilm in dental unit waterlines, once established, has proven formidable to efforts in disinfection/disruption. This project compared standardized evaluation techniques by assessing the efficacy of a variety of agents that have been reported or suggested as useful in surface disinfection and/or antiseptic protocols. The zones of inhibition, minimum inhibitory/bactericidal concentrations and use-dilution with stainless steel carrier replicates tests assessed the disinfection of planktonic organisms using standardized microbial testing procedures. The disruption and/or disinfection of planktonic and biofilm organisms within naturally occurring dental unit waterlines were evaluated by culture and scanning electron microscopy. The six commercially available antimicrobial agents used to assess the techniques were bleach (sodium hypochlorite), Cavicide, glutaraldehyde, Listerine Antiseptic, Peridex and Sterilex Ultra. Comparisons between the results for each technique evaluated were determined for each product. All six agents demonstrated antimicrobial efficacy at the working concentrations designated by the manufacturers. Biofilm matrix elimination evaluated by scanning electron microscopy found virtually 0% elimination by glutaraldehyde to an estimated 90% elimination by Sterilex Ultra and bleach after one treatment. Treatment with Cavicide, Listerine Antiseptic and Peridex resulted in negligible elimination of the biofilm matrix. For comparability, the use of standardized testing techniques to evaluate a disinfection agent's efficacy against dental unit waterline contamination is essential. This project demonstrates a model system for evaluating disinfection agents potentially useful in the management of dental unit waterline biofilm, and should assist in educating the dental clinician in the appraisal of existing and

Educational needs and employment status of Scottish dental technicians.

PubMed

Ross, M K; Ibbetson, R J

2005-07-23

To investigate the educational needs and employment status of dental technicians in Scotland. Two hundred and fifty dental technicians with postal addresses in Scotland. Structured questionnaire. An 83% response rate was achieved following three mailings. The majority of respondents were employed in commercial dental laboratories largely within the 'central belt' of Scotland, with 96% stating they were in full-time employment. Only 33% of these essential health-care workers were voluntarily registered with the Dental Technicians' Association, suggesting that a significant number had not felt it necessary or beneficial to do so. A lack of educational structure was identified, as was poor remuneration and an absence of opportunity for career progression. Although the prospect of continuing professional development was desirable, many respondents reported that they would be penalised financially for undertaking this and, in addition, may not be given the opportunity to pursue education because of lack of co-operation from their employer. Only 47% had attended an educational event within the preceding year, and of those who had not done this, a period of two-32 years had elapsed since any CPD involvement. Of the respondents, only 34% stated that any financial assistance had been available for educational purposes, with access to education being highlighted as problematic by 68%. A total of 64% of subjects felt they were out-of-date with professional education. This study highlights a number of real and potential problems in the field of education in dental technology. It is apparent that change within the structure of education and professional status, although largely welcomed, may be difficult to implement. The profession, as a whole, must realise that these changes in education and employment are not optional, and should be embraced as a positive step which will hopefully raise the profile and status of dental technicians throughout the UK.

Robotic Lunar Rover Technologies and SEI Supporting Technologies at Sandia National Laboratories

NASA Technical Reports Server (NTRS)

Klarer, Paul R.

1992-01-01

Existing robotic rover technologies at Sandia National Laboratories (SNL) can be applied toward the realization of a robotic lunar rover mission in the near term. Recent activities at the SNL-RVR have demonstrated the utility of existing rover technologies for performing remote field geology tasks similar to those envisioned on a robotic lunar rover mission. Specific technologies demonstrated include low-data-rate teleoperation, multivehicle control, remote site and sample inspection, standard bandwidth stereo vision, and autonomous path following based on both internal dead reckoning and an external position location update system. These activities serve to support the use of robotic rovers for an early return to the lunar surface by demonstrating capabilities that are attainable with off-the-shelf technology and existing control techniques. The breadth of technical activities at SNL provides many supporting technology areas for robotic rover development. These range from core competency areas and microsensor fabrication facilities, to actual space qualification of flight components that are designed and fabricated in-house.

Collaboration between dental faculties and National Dental Associations (NDAs) within the World Dental Federation-European Regional Organization zone: an NDAs perspective.

PubMed

Yamalik, Nermin; Mersel, Alex; Cavalle, Edoardo; Margvelashvili, Vladimer

2011-12-01

Although improvements in certain oral health measures have been achieved, many global oral health matters and challenges exist. Collaborations and partnerships among various institutions are crucial in solving such problems. The main aim of the present study was to analyse the nature and extent of the partnership between dental faculties and National Dental Associations (NDAs). A questionnaire was developed, focusing on the relationship between NDAs and dental faculties within the World Dental Federation-European Regional Organization (FDI-ERO) zone with regard to major professional activities, such as dental education (both undergraduate and continuing education), workforce issues, improvement of national oral health, and science and knowledge transfer. The questionnaire was sent to all member NDAs within the ERO zone. The response rate was 21/41 (53.65%). The major activities in which NDAs were found to be involved were improvement of national oral health (100%), followed by continuing education activities (90%), whereas the activity which received least involvement was the development of an undergraduate dental curriculum (52%). The NDAs perceived their relationship with dental faculties to be quite satisfactory in the fields of continuing education, science and knowledge transfer, and the implementation of new technologies into daily dental practice. However, it was suggested that their relationship needed significant improvement with regard to the development of an undergraduate dental education curriculum, dental workforce issues and negotiations with the authorities regarding professional matters/issues. As the two important elements of organised dentistry, NDAs and dental faculties have a significant role to play in the improvement of oral health and in finding solutions to global oral health challenges; therefore, their collaboration and partnership are crucial for this purpose. On the basis of the perceptions of NDAs regarding their relationship with

Advances in dental materials.

PubMed

Vaderhobli, Ram M

2011-07-01

The use of materials to rehabilitate tooth structures is constantly changing. Over the past decade, newer material processing techniques and technologies have significantly improved the dependability and predictability of dental material for clinicians. The greatest obstacle, however, is in choosing the right combination for continued success. Finding predictable approaches for successful restorative procedures has been the goal of clinical and material scientists. This article provides a broad perspective on the advances made in various classes of dental restorative materials in terms of their functionality with respect to pit and fissure sealants, glass ionomers, and dental composites. Copyright © 2011 Elsevier Inc. All rights reserved.

Dental Hygiene Education Workshop: Proceedings of Workshop on Dental Hygiene Education (Denver, Colorado, July 22-23, 1984).

ERIC Educational Resources Information Center

American Dental Hygienists' Association, Chicago, IL.

Proceedings from the first in a yearly series of conferences on dental hygiene education sponsored by the American Dental Hygienists' Association are presented. Three sessions are as follows: (1) "Society at Large: Economics, Cultural Trends, Work Trends, Demographics, and Technology" (Felix Kaufmann); (2) "The Health Care System: Changes and…

Dental digital radiographic imaging.

PubMed

Mauriello, S M; Platin, E

2001-01-01

Radiographs are an important adjunct to providing oral health care for the total patient. Historically, radiographic images have been produced using film-based systems. However, in recent years, with the arrival of new technologies, many practitioners have begun to incorporate digital radiographic imaging into their practices. Since dental hygienists are primarily responsible for exposing and processing radiographs in the provision of dental hygiene care, it is imperative that they become knowledgeable on the use and application of digital imaging in patient care and record keeping. The purpose of this course is to provide a comprehensive overview of digital radiography in dentistry. Specific components addressed are technological features, diagnostic software, advantages and disadvantages, technique procedures, and legal implications.

Initiating the 2002 Mars Science Laboratory (MSL) Focused Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to deliver a new generation of rover safely to the surface of Mars and conduct comprehensive in situ investigations using a new generation of instruments. This system will be designed to land with precision and be capable of operating over a large percentage on the surface of Mars. It will have capabilities that will support NASA's scientific goals into the next decade of exphation. The MSL Technology program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by the Jet Propulsion Laboratory (JPL) and is divided into a Focused Program and a Base Program. The Focused Technology Program addresses technologies that are specific and critical to near-term missions, while the Base Technology Program addresses those technologies that are applicable to multiple missions and which can be characterized as longer term, higher risk, and high payoff technologies. The MSL Technology Program is under the Focused Program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology s requirements and the development process are tightly coordinated with the Project. The Technology Program combines proven management techniques of flight projects with commercial and academic technology management strategies, to create a technology management program that meets the near-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas

Current trends in dental implants

PubMed Central

Gaviria, Laura; Salcido, John Paul; Guda, Teja

2014-01-01

Tooth loss is very a very common problem; therefore, the use of dental implants is also a common practice. Although research on dental implant designs, materials and techniques has increased in the past few years and is expected to expand in the future, there is still a lot of work involved in the use of better biomaterials, implant design, surface modification and functionalization of surfaces to improve the long-term outcomes of the treatment. This paper provides a brief history and evolution of dental implants. It also describes the types of implants that have been developed, and the parameters that are presently used in the design of dental implants. Finally, it describes the trends that are employed to improve dental implant surfaces, and current technologies used for the analysis and design of the implants. PMID:24868501

Dental technology over 150 years: evolution and revolution.

PubMed

Feuerstein, Paul

2014-01-01

A patient entering a dental office is often greeted and then checked in through the practice management system's digital appointment book. The provider is notified by an electronic signal that is visual, audible, or both. The patient is led to the treatment area and sits in a dental chair which is adjusted to the individual's size and position for the treatment, and the light is positioned. Sometimes a radiograph is taken, local anesthetic is delivered, and a handpiece--air turbine or electric--is used for the procedure. How different is this process today from a dentist treating a patient in 1864?

Update on Electronic Dental Record and Clinical Computing Adoption Among Dental Practices in the United States

PubMed Central

Schroeder, Dixie; Schwei, Kelsey; Chyou, Po-Huang

2017-01-01

This study sought to re-characterize trends and factors affecting electronic dental record (EDR) and technologies adoption by dental practices and the impact of the Health Information Technology for Economic and Clinical Health (HITECH) act on adoption rates through 2012. A 39-question survey was disseminated nationally over 3 months using a novel, statistically-modeled approach informed by early response rates to achieve a predetermined sample. EDR adoption rate for clinical support was 52%. Adoption rates were higher among: (1) younger dentists; (2) dentists ≤ 15 years in practice; (3) females; and (4) group practices. Top barriers to adoption were EDR cost/expense, cost-benefit ratio, electronic format conversion, and poor EDR usability. Awareness of the Federal HITECH incentive program was low. The rate of chairside computer implementation was 72%. Adoption of EDR in dental offices in the United States was higher in 2012 than electronic health record adoption rates in medical offices and was not driven by the HITECH program. Patient portal adoption among dental practices in the United States remained low. PMID:29229631

MIT Lincoln Laboratory Annual Report 2007: Technology in Support of National Security

DTIC Science & Technology

2007-01-01

technical innovation and scientific discoveries. MISSION: TechnoLogy In SupporT of naTIonaL SecurITy 2007 Dr. Claude R. Canizares Vice president for...problems. The Lincoln Laboratory New Technology Initiatives Program is one of several internal technology innovation mechanisms. Technologies emerging...externships. LIFT2, an innovative professional learning program for science, technology , and math teachers, serves Massachusetts metro south/west region

Massachusetts Institute of Technology Artificial Intelligence Laboratory Bibliography.

ERIC Educational Resources Information Center

Massachusetts Inst. of Tech., Cambridge. Artificial Intelligence Lab.

Massachusetts Institute of Technology (MIT) presents a bibliography of more than 350 reports, theses, and papers from its artificial intelligence laboratory. Title, author, and identification number are given for all items, and most also have a date and contract number. Some items are no longer available, and others may be obtained from National…

Design and implementation of a hospital-based usability laboratory: insights from a Department of Veterans Affairs laboratory for health information technology.

PubMed

Russ, Alissa L; Weiner, Michael; Russell, Scott A; Baker, Darrell A; Fahner, W Jeffrey; Saleem, Jason J

2012-12-01

Although the potential benefits of more usable health information technologies (HIT) are substantial-reduced HIT support costs, increased work efficiency, and improved patient safety--human factors methods to improve usability are rarely employed. The US Department of Veterans Affairs (VA) has emerged as an early leader in establishing usability laboratories to inform the design of HIT, including its electronic health record. Experience with a usability laboratory at a VA Medical Center provides insights on how to design, implement, and leverage usability laboratories in the health care setting. The VA Health Services Research and Development Service Human-Computer Interaction & Simulation Laboratory emerged as one of the first VA usability laboratories and was intended to provide research-based findings about HIT designs. This laboratory supports rapid prototyping, formal usability testing, and analysis tools to assess existing technologies, alternative designs, and potential future technologies. RESULTS OF IMPLEMENTATION: Although the laboratory has maintained a research focus, it has become increasingly integrated with VA operations, both within the medical center and on a national VA level. With this resource, data-driven recommendations have been provided for the design of HIT applications before and after implementation. The demand for usability testing of HIT is increasing, and information on how to develop usability laboratories for the health care setting is often needed. This article may assist other health care organizations that want to invest in usability resources to improve HIT. The establishment and utilization of usability laboratories in the health care setting may improve HIT designs and promote safe, high-quality care for patients.

Relationships between dental personnel and non-dental primary health care providers in rural and remote Queensland, Australia: dental perspectives.

PubMed

Stuart, Jackie; Hoang, Ha; Crocombe, Len; Barnett, Tony

2017-06-19

Collaboration between dental practitioners and non-dental primary care providers has the potential to improve oral health care for people in rural and remote communities, where access to oral health services is limited. However, there is limited research on collaboration between these professional disciplines. The purpose of this paper was to explore the relationships between dental practitioners and non-dental primary care providers from rural and remote areas of Queensland and to identify strategies that could improve collaboration between these disciplines from the perspective of dental participants. Semi-structured interviews were conducted between 2013 and 2015 with visiting, local and regional dental practitioners (n = 12) who had provided dental services to patients from eight rural and remote Queensland communities that did not have a resident dentist. Participants were purposely recruited through a snow ball sampling technique. Interview data were analysed using thematic analysis with the assistance of QSR Nvivo v.10. Four major themes emerged from the data: (1) Communication between dental practitioners and rural primary care providers; (2) Relationships between dental and primary care providers; (3) Maintenance of professional dualism; (4) Strategies to improve interprofessional relationships (with subthemes: face to face meetings; utilisation of technology; oral health training for primary care providers; and having a community based oral health contact person). Participants observed that there was a lack of communication between the dental providers who saw patients from these rural communities and the primary care providers who worked in each community. This was attributed to poor communication, the high turnover of staff and the siloed behaviours of some practitioners. Visiting dental practitioners were likely to have stronger professional relationships with hospital nursing, administrative and allied health care staff who were often long term

Effects of Dental 3D Multimedia System on the Performance of Junior Dental Students in Preclinical Practice: A Report from China

ERIC Educational Resources Information Center

Hu, Jian; Yu, Hao; Shao, Jun; Li, Zhiyong; Wang, Jiawei; Wang, Yining

2009-01-01

Background: Computer-assisted tools are rarely adopted for dental education in China. In China, 3D digital technology, such as Virtual Reality Systems, are often rejected in the dental field due to prohibitive pricing. There is also a reluctance to move away from traditional patterns of dental education. Objective: The current study is one of a…

[Radiodiagnostic methods for dental anomalities].

PubMed

Ternovoĭ, S K; Serova, N S; Ivanova, D V

2012-01-01

To determine the capacities of radiologic studies in the examination of patients with dental anomalies. One hundred and twenty patients with dental anomalies were examined. Conventional X-ray and high-technology radiology techniques (multislice spiral computed tomography (MSSCT) and cone-beam computed tomography (CBCT)) were used. Orthopantomography is the most common method for radiologic examination of patients with dental anomalies. However, X-ray procedures do not provide complete information on the position and status of an abnormal tooth, which is required to define further patient management tactics. While planning the management, MSSCT and CBCT were performed in 56 (46.7%) and 64 (53.3%) patients, respectively. In addition, 72 (60.0%) patients in whom orthodontic treatment had been recommended at the first stage underwent MSSCT or CBCT following 7 months. CBCT showed that 4 (3.3%) patients had dental ankylosis previously undiagnosed by MSSCT. The high-technology radiology techniques could assess the position of a tooth in relation to its important anatomic structures and identify the comorbidity that keeps from being treated. MSSCT and CBCT can make in full measure the topical diagnosis of abnormal teeth and hence choose an optimal algorithm for comprehensive treatment of patients.

Electronic Dental Records System Adoption.

PubMed

Abramovicz-Finkelsztain, Renata; Barsottini, Claudia G N; Marin, Heimar Fatima

2015-01-01

The use of Electronic Dental Records (EDRs) and management software has become more frequent, following the increase in prevelance of new technologies and computers in dental offices. The purpose of this study is to identify and evaluate the use of EDRs by the dental community in the São Paulo city area. A quantitative case study was performed using a survey on the phone. A total of 54 offices were contacted and only one declinedparticipation in this study. Only one office did not have a computer. EDRs were used in 28 offices and only four were paperless. The lack of studies in this area suggests the need for more usability and implementation studies on EDRs so that we can improve EDR adoption by the dental community.

Calculus detection calibration among dental hygiene faculty members utilizing dental endoscopy: a pilot study.

PubMed

Partido, Brian B; Jones, Archie A; English, Dana L; Nguyen, Carol A; Jacks, Mary E

2015-02-01

Dental and dental hygiene faculty members often do not provide consistent instruction in the clinical environment, especially in tasks requiring clinical judgment. From previous efforts to calibrate faculty members in calculus detection using typodonts, researchers have suggested using human subjects and emerging technology to improve consistency in clinical instruction. The purpose of this pilot study was to determine if a dental endoscopy-assisted training program would improve intra- and interrater reliability of dental hygiene faculty members in calculus detection. Training included an ODU 11/12 explorer, typodonts, and dental endoscopy. A convenience sample of six participants was recruited from the dental hygiene faculty at a California community college, and a two-group randomized experimental design was utilized. Intra- and interrater reliability was measured before and after calibration training. Pretest and posttest Kappa averages of all participants were compared using repeated measures (split-plot) ANOVA to determine the effectiveness of the calibration training on intra- and interrater reliability. The results showed that both kinds of reliability significantly improved for all participants and the training group improved significantly in interrater reliability from pretest to posttest. Calibration training was beneficial to these dental hygiene faculty members, especially those beginning with less than full agreement. This study suggests that calculus detection calibration training utilizing dental endoscopy can effectively improve interrater reliability of dental and dental hygiene clinical educators. Future studies should include human subjects, involve more participants at multiple locations, and determine whether improved rater reliability can be sustained over time.

Collaboration spotting for dental science.

PubMed

Leonardi, E; Agocs, A; Fragkiskos, S; Kasfikis, N; Le Goff, J M; Cristalli, M P; Luzzi, V; Polimeni, A

2014-10-06

The goal of the Collaboration Spotting project is to create an automatic system to collect information about publications and patents related to a given technology, to identify the key players involved, and to highlight collaborations and related technologies. The collected information can be visualized in a web browser as interactive graphical maps showing in an intuitive way the players and their collaborations (Sociogram) and the relations among the technologies (Technogram). We propose to use the system to study technologies related to Dental Science. In order to create a Sociogram, we create a logical filter based on a set of keywords related to the technology under study. This filter is used to extract a list of publications from the Web of Science™ database. The list is validated by an expert in the technology and sent to CERN where it is inserted in the Collaboration Spotting database. Here, an automatic software system uses the data to generate the final maps. We studied a set of recent technologies related to bone regeneration procedures of oro--maxillo--facial critical size defects, namely the use of Porous HydroxyApatite (HA) as a bone substitute alone (bone graft) or as a tridimensional support (scaffold) for insemination and differentiation ex--vivo of Mesenchymal Stem Cells. We produced the Sociograms for these technologies and the resulting maps are now accessible on--line. The Collaboration Spotting system allows the automatic creation of interactive maps to show the current and historical state of research on a specific technology. These maps are an ideal tool both for researchers who want to assess the state--of--the--art in a given technology, and for research organizations who want to evaluate their contribution to the technological development in a given field. We demonstrated that the system can be used for Dental Science and produced the maps for an initial set of technologies in this field. We now plan to enlarge the set of mapped

Dental Diamond Rotary Instruments. Test and Evaluation

DTIC Science & Technology

1983-09-01

Gov’t. agencies only; Critical Technology; Test and Evaluation; 19 NOV 1982. Other requests shall be referred to Dental Investigation Service, School of... DENTAL DIAMOND ROTARY INSTRUMENTS Test and Evaluation Cad D. Foster, Major, USAF, DC Joseph M. Powell, Colonel, USAF, DC John M. Young, Colonel, USAF...19 November 1982. Other requests for this document must be referred to the Dental Investig tion Service, USAF School of Aerospace Medicine. SUBJECT TO

Allied Health Occupations II. Dental Assistant Component. Student Learning Guide. Middletown Public Schools Curriculum Standards.

ERIC Educational Resources Information Center

Middletown Public Schools, CT.

This volume outlines the requirements and content of a second-year course in allied health occupations education that is designed to provide students with a practical understanding of the work done by dentists, dental hygienists, dental laboratory technicians, and dental assistants and also to help students acquire some basic dental assistant…

Use and Acceptance of Information and Communication Technology Among Laboratory Science Students

NASA Astrophysics Data System (ADS)

Barnes, Brenda C.

Online and blended learning platforms are being promoted within laboratory science education under the assumption that students have the necessary skills to navigate online and blended learning environments. Yet little research has examined the use of information and communication technology (ICT) among the laboratory science student population. The purpose of this correlational, survey research study was to explore factors that affect use and acceptance of ICT among laboratory science students through the theoretical lens of the unified theory of acceptance and use of technology (UTAUT) model. An electronically delivered survey drew upon current students and recent graduates (within 2 years) of accredited laboratory science training programs. During the 4 week data collection period, 168 responses were received. Results showed that the UTAUT model did not perform well within this study, explaining 25.2% of the variance in use behavior. A new model incorporating attitudes toward technology and computer anxiety as two of the top variables, a model significantly different from the original UTAUT model, was developed that explained 37.0% of the variance in use behavior. The significance of this study may affect curriculum design of laboratory science training programs wanting to incorporate more teaching techniques that use ICT-based educational delivery, and provide more options for potential students who may not currently have access to this type of training.

Developments of Spent Nuclear Fuel Pyroprocessing Technology at Idaho National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael F. Simpson

This paper summarizes research in used fuel pyroprocessing that has been published by Idaho National Laboratory over the last decade. It includes work done both on treatment of Experimental Breeder Reactor-II and development of advanced technology for potential scale-up and commercialization. Collaborations with universities and other laboratories is included in the cited work.

Dental anxiety in Fiji.

PubMed

Morse, Zac; Takau, Aleva F

2004-03-01

Despite the technological advances in dentistry, anxiety about dental treatment and the fear of pain associated with dentistry remains globally widespread and is considered a major barrier to dental treatment. This can have detrimental consequences to people's oral health and pose a serious epidemiological challenge to oral health care professionals. Dental anxiety is well described in the Western world however there is little literature on the situation in the developing world. The purpose of the study was to evaluate the levels of dental anxiety in Fijians using Corah's DentalAnxiety Scale (DAS). 120 adults, aged 18-45 years were randomly selected from the capital city of Suva until there were 60 Indigenous and 60 IndoFijians, with 30 males and 30 females from each group responding to questions from Corah's Dental Anxiety Scale. The average DAS for all the participants was 8.8. The average DAS for IndoFijians was 9.8 and was significantly higher than for Indigenous Fijians ie 78. IndoFijians only reported less anxiety with increasing age as the Indigenous Fijians generally displayed low levels of anxiety. There was no significant difference in DAS between the genders. A considerable proportion of IndoFijians (28%) were anxious with 13% being highly anxious. Young IndoFijian adults are more likely to possess dental anxiety and should be managed appropriately which may include behavioural and/or pharmacological therapy. This may require referral to dental specialists or involve a multidisciplinary approach to the management of these people.

[Three dimensional bioprinting technology of human dental pulp cells mixtures].

PubMed

Xue, Shi-hua; Lv, Pei-jun; Wang, Yong; Zhao, Yu; Zhang, Ting

2013-02-18

To explore the three dimensional(3D)bioprinting technology, using human dental pulp cells (hDPCs) mixture as bioink and to lay initial foundations for the application of the 3D bioprinting technology in tooth regeneration. Imageware 11.0 computer software was used to aid the design of the 3D biological printing blueprint. Sodium alginate-gelatin hydrosol was prepared and mixed with in vitro isolated hDPCs. The mixture contained 20 g/L sodium alginate and 80 g/L gelatin with cell density of 1×10(6)/mL. The bioprinting of hDPCs mixture was carried out according to certain parameters; the 3D constructs obtained by printing were examined; the viability of hDPCs after printing by staining the constructs with calcein-AM and propidium iodide dye and scanning of laser scanning confocal microscope was evaluated. The in vitro constructs obtained by the bioprinting were cultured, and the proliferation of hDPCs in the constructs detected. By using Imageware 11.0 software, the 3D constructs with the grid structure composed of the accumulation of staggered cylindrical microfilament layers were obtained. According to certain parameters, the hDPCs-sodium alginate-gelatin blends were printed by the 3D bioprinting technology. The self-defined shape and dimension of 3D constructs with the cell survival rate of 87%± 2% were constructed. The hDPCs could proliferate in 3D constructs after printing. In this study, the 3D bioprinting of hDPCs mixtures was realized, thus laying initial foundations for the application of the 3D bioprinting technology in tooth regeneration.

Optically Stimulated Luminescence (OSL) of dental enamel for retrospective assessment of radiation exposure

PubMed Central

Yukihara, E.G.; Mittani, J.; McKeever, S.W.S.; Simon, S.L.

2009-01-01

This paper briefly reviews the optically stimulated luminescence (OSL) properties of dental enamel and discusses the potential and challenges of OSL for filling the technology gap in biodosimetry required for medical triage following a radiological/nuclear accident or terrorist event. The OSL technique uses light to stimulate a radiation-induced luminescence signal from materials previously exposed to ionizing radiation. This luminescence originates from radiation-induced defects in insulating crystals and is proportional to the absorbed dose of ionizing radiation. In our research conducted to date, we focused on fundamental investigations of the OSL properties of dental enamel using extracted teeth and tabletop OSL readers. The objective was to obtain information to support the development of the necessary instrumentation for retrospective dosimetry using dental enamel in laboratory, or for in situ and non-invasive accident dosimetry using dental enamel in emergency triage. An OSL signal from human dental enamel was detected using blue, green, or IR stimulation. Blue/green stimulation associated with UV emission detection seems to be the most appropriate combination in the sense that there is no signal from un-irradiated samples and the shape of the OSL decay is clear. Improvements in the minimum detection level were achieved by incorporating an ellipsoidal mirror in the OSL system to maximize light collection. Other possibilities to improve the sensitivity and research steps necessary to establish the feasibility of the technique for retrospective assessment of radiation exposure are also discussed. PMID:19623269

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

PubMed

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Understanding dental CAD/CAM for restorations--accuracy from a mechanical engineering viewpoint.

PubMed

Tapie, Laurent; Lebon, Nicolas; Mawussi, Bernardin; Fron-Chabouis, Hélène; Duret, Francois; Attal, Jean-Pierre

2015-01-01

As is the case in the field of medicine, as well as in most areas of daily life, digital technology is increasingly being introduced into dental practice. Computer-aided design/ computer-aided manufacturing (CAD/CAM) solutions are available not only for chairside practice but also for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental practice can be considered as the handling of devices and software processing for the almost automatic design and creation of dental restorations. However, dentists who want to use dental CAD/CAM systems often do not have enough information to understand the variations offered by such technology practice. Knowledge of the random and systematic errors in accuracy with CAD/CAM systems can help to achieve successful restorations with this technology, and help with the purchasing of a CAD/CAM system that meets the clinical needs of restoration. This article provides a mechanical engineering viewpoint of the accuracy of CAD/ CAM systems, to help dentists understand the impact of this technology on restoration accuracy.

Simulation and curriculum design: a global survey in dental education.

PubMed

Perry, S; Burrow, M F; Leung, W K; Bridges, S M

2017-12-01

Curriculum reforms are being driven by globalization and international standardization. Although new information technologies such as dental haptic virtual reality (VR) simulation systems have provided potential new possibilities for clinical learning in dental curricula, infusion into curricula requires careful planning. This study aimed to identify current patterns in the role and integration of simulation in dental degree curricula internationally. An original internet survey was distributed by invitation to clinical curriculum leaders in dental schools in Asia, Europe, North America, and Oceania (Australia and New Zealand). The results (N = 62) showed Asia, Europe and Oceania tended towards integrated curriculum designs with North America having a higher proportion of traditional curricula. North America had limited implementation of haptic VR simulation technology but reported the highest number of scheduled simulation hours. Australia and New Zealand were the most likely regions to incorporate haptic VR simulation technology. This survey indicated considerable variation in curriculum structure with regionally-specific preferences being evident in terms of curriculum structure, teaching philosophies and motivation for incorporation of VR haptic simulation into curricula. This study illustrates the need for an improved evidence base on dental simulations to inform curriculum designs and psychomotor skill learning in dentistry. © 2017 Australian Dental Association.

Science and Technology Teachers' Views about the Causes of Laboratory Accidents

ERIC Educational Resources Information Center

Aydogdu, Cemil

2015-01-01

The aim of this study was to determine science and technology teachers' views about the causes of the problems encountered in laboratories. In this research, phenomenology, a qualitative research design, was used. 21 science and technology teachers who were working in elementary schools in Eskisehir during the 2010-2011 spring semester were the…

Incorporating spectroscopy and measurement technology into the high school chemistry laboratory

NASA Astrophysics Data System (ADS)

Harbert, Emily Ann

Science and technology are becoming increasingly important in maintaining a healthy economy at home and a competitive edge on the world stage, though that is just one facet affected by inadequate science education in the United States. Engaging students in the pursuit of knowledge and giving them the skills to think critically are paramount. One small way to assist in achieving these goals is to increase the quality and variety of technology-rich activities conducted in high school classrooms. Incorporating more laboratory measurement technology into high schools may incite more student interest in the processes and practices of science and may allow students to learn to think more critically about their data and what it represents. The first objective of the work described herein was to determine what measurement technology is being used in schools and to what extent, as well as to determine other teacher needs and preferences. Second, the objective was to develop a new program to provide incoming freshmen (or rising seniors) with measurement technology training they did not receive in high school, and expose them to new research and career opportunities in science. The final objective was to create a technology-rich classroom laboratory activity for use in high schools.

Compendium of Dental Residents’ Research Projects and Literature Reviews - 1990

DTIC Science & Technology

1991-03-01

AL-SR-1991-0001 AD-A236 272 COMPENDIUM OF DENTAL RESIDENTS’ RESEARCH PROJECTS AND LITERATURE REVIEWS 1990 CDTIC JNO 6INSi3 Samuel P. Davis...USAF Dental Investigation Service Armstrong Laboratory Human Systems Division (AFSC) 91-01146 Brooks Air Force Base, TX 78235-5000 .,....,,.,,.l. ltfl 91...L, / 041 4li NOTICES This interim special report was submitted by personnel of the Dental Investigation Service, Clinical Sciences Division

Assessing the effectiveness of technology transfer from U.S. government R&D laboratories: impact of market orientation

NASA Astrophysics Data System (ADS)

Bozeman, Barry; Coker, Karen

1992-05-01

This study, based on a national survey of U.S. government laboratories, assesses the degree of success laboratories have had in transferring technology to industry, taking into account the laboratories' differing receptivity to market influences. Three success criteria are considered here, two based on self-evaluations and a third based on the number of technology licenses issued from the laboratory. The two self-evaluations are rooted in different types of effectiveness, `getting technology out the door,' in one case, and, in the other, having a demonstrable commercial impact. A core hypothesis of the study is that the two types of effectiveness will be responsive to different factors and, in particular, the laboratories with a clearer market orientation will have a higher degree of success on the commercial impact and technology license criteria. Overall, the results seem to suggest that multifaceted, multimission laboratories are likely to enjoy the most success in technology transfer, especially if they have relatively low levels of bureaucratization and either ties to industry (particularly direct financial ties) or a commercial orientation in the selection of projects.

[The application of universal adhesives in dental bonding].

PubMed

Guo, Jingmei; Lei, Wenlong; Yang, Hongye; Huang, Cui

2016-03-01

The bonding restoration has become an important clinical technique for the development of dental bonding technology. Because of its easy operation and the maximum preservation of tooth tissues, bonding repair is widely used in dental restoration. The recent multi-mode universal adhesives have brought new progress in dental bonding restoration. In this article the universal adhesives were reviewed according to its definition, development, improvement, application features and possible problems.

Understanding dental CAD/CAM for restorations--the digital workflow from a mechanical engineering viewpoint.

PubMed

Tapie, L; Lebon, N; Mawussi, B; Fron Chabouis, H; Duret, F; Attal, J-P

2015-01-01

As digital technology infiltrates every area of daily life, including the field of medicine, so it is increasingly being introduced into dental practice. Apart from chairside practice, computer-aided design/computer-aided manufacturing (CAD/CAM) solutions are available for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental solutions can be considered a chain of digital devices and software for the almost automatic design and creation of dental restorations. However, dentists who want to use the technology often do not have the time or knowledge to understand it. A basic knowledge of the CAD/CAM digital workflow for dental restorations can help dentists to grasp the technology and purchase a CAM/CAM system that meets the needs of their office. This article provides a computer-science and mechanical-engineering approach to the CAD/CAM digital workflow to help dentists understand the technology.

Use and Acceptance of Information and Communication Technology among Laboratory Science Students

ERIC Educational Resources Information Center

Barnes, Brenda C.

2013-01-01

Online and blended learning platforms are being promoted within laboratory science education under the assumption that students have the necessary skills to navigate online and blended learning environments. Yet little research has examined the use of information and communication technology (ICT) among the laboratory science student population.…

Calculus detection technologies: where do we stand now?

PubMed Central

Archana, V

2014-01-01

Epidemiological studies have implicated dental calculus as an ideal substrate for subgingival microbial colonization. Therefore, the main objective of periodontal therapy is to eliminate the microbial biofilm along with the calculus deposits from the root surface by root surface debridement. Over the past years, a large number of clinical and laboratory studies have been conducted to evaluate the efficacy of calculus removal by various methods. None of these conventional methods or devices was effective in completely eliminating all the calculus from the diseased root surfaces. In this context, a number of newer technologies have been developed to identify and selectively remove the dental calculus. Regarding this fact, the present article highlights a critical review of these devices based on published clinical and experimental data. PMID:25870667

Calculus detection technologies: where do we stand now?

PubMed

Archana, V

2014-01-01

Epidemiological studies have implicated dental calculus as an ideal substrate for subgingival microbial colonization. Therefore, the main objective of periodontal therapy is to eliminate the microbial biofilm along with the calculus deposits from the root surface by root surface debridement. Over the past years, a large number of clinical and laboratory studies have been conducted to evaluate the efficacy of calculus removal by various methods. None of these conventional methods or devices was effective in completely eliminating all the calculus from the diseased root surfaces. In this context, a number of newer technologies have been developed to identify and selectively remove the dental calculus. Regarding this fact, the present article highlights a critical review of these devices based on published clinical and experimental data.

The Effect of Recent Trends on Dental Hygiene.

ERIC Educational Resources Information Center

Douglass, Chester W.

1991-01-01

Six trends affecting dental hygiene practice are discussed: demographic changes; disease pattern changes; higher societal expectations; financing and delivery system changes; technological advancement; and regulatory and legislative trends. It is argued that, though the trends reflect positively on dental hygiene, practitioners need to increase…

Children acceptance of laser dental treatment

NASA Astrophysics Data System (ADS)

Lazea, Andreea; Todea, Carmen

2016-03-01

Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

Overview and challenges of molecular technologies in the veterinary microbiology laboratory.

PubMed

Cunha, Mónica V; Inácio, João

2015-01-01

Terrestrial, aquatic, and aerial animals, either domestic or wild, humans, and plants all face similar health threats caused by infectious agents. Multifaceted anthropic pressure caused by an increasingly growing and resource-demanding human population has affected biodiversity at all scales, from the DNA molecule to the pathogen, to the ecosystem level, leading to species declines and extinctions and, also, to host-pathogen coevolution processes. Technological developments over the last century have also led to quantic jumps in laboratorial testing that have highly impacted animal health and welfare, ameliorated animal management and animal trade, safeguarded public health, and ultimately helped to "secure" biodiversity. In particular, the field of molecular diagnostics experienced tremendous technical progresses over the last two decades that significantly have contributed to our ability to study microbial pathogens in the clinical and research laboratories. This chapter highlights the strengths, weaknesses, opportunities, and threats (or challenges) of molecular technologies in the framework of a veterinary microbiology laboratory, in view of the latest advances.

A Collaborative, Investigative Recombinant DNA Technology Course with Laboratory

ERIC Educational Resources Information Center

Pezzementi, Leo; Johnson, Joy F.

2002-01-01

A recombinant DNA technology course was designed to promote contextual, collaborative, inquiry-based learning of science where students learn from one another and have a sense of ownership of their education. The class stressed group presentations and critical reading and discussion of scientific articles. The laboratory consisted of two research…

Levels of career satisfaction amongst dental healthcare professionals: comparison of dental therapists, dental hygienists and dental practitioners.

PubMed

Newton, J T; Gibbons, D E

2001-09-01

To compare the levels of career satisfaction expressed by three professional groups working in dental health: dental therapists, dental hygienists and dental practitioners. Level of career satisfaction was assessed using a ten point scale in three surveys. Postal surveys were conducted of all dental therapists and dental hygienists registered with the General Dental Council. Data for dental practitioners were collected as part of the British Dental Association Omnibus Survey 2000. Data are reported for 227 dental therapists, 2,251 dental hygienists and 970 dental practitioners. Significant differences were found between groups in the level of career satisfaction expressed. Dental practitioners were less likely to express high levels of satisfaction in comparison with the other two professional groups. Within each group characteristics of the respondents were associated with satisfaction levels. Younger dental therapists and dental hygienists expressed lower levels of career satisfaction. The level of career satisfaction expressed by dental practitioners was associated with gender, place of work (North vs South UK), year of qualification, size of practice and system of remuneration. Dental practitioners express lower levels of job satisfaction in comparison to other groups of dental health care professionals. Job dissatisfaction among dental practitioners is related to a number of socio-demographic factors.

Morphological study on dental caries induced in WBN/KobSlc rats (Rattus norvegicus) fed a standard laboratory diet.

PubMed

Fukuzato, Yoko; Matsuura, Tetsuro; Ozaki, Kiyokazu; Matsuura, Masahiro; Sano, Tomoya; Nakahara, Yutaka; Kodama, Yasushi; Nakagawa, Akihito; Okamura, Sumie; Suido, Hirohisa; Torii, Kayo; Makino, Taketoshi; Narama, Isao

2009-10-01

In our previous studies, WBN/KobSlc was characterized as a rat strain in which only males began to develop pancreatitis, and then presented with diabetic symptoms. In the course of studying their pancreatic inflammation, we detected molar caries in prediabetic males feeding on a standard diet (CRF-1) widely used for experimental animals. The purpose of this study is to confirm whether the WBN/KobSlc strain is caries-susceptible to the diet reported to be non-cariogenic, and to examine the effect of a prediabetic condition on their dental caries. For a morphological study, 25 male WBN/KobSlc rats aged 3.2-7.8 months and 24 females of the same strain aged 3.3-6.6 months were used, along with 10 males and 10 females of 8.2-month-old F344 rats. Marked dental caries were detected in the mandibular molars of male and female WBN/KobSlc rats regardless of pancreatitis, although no similar changes were observed in any teeth of the F344 strain fed the same diet. Soft X-ray examination revealed that the caries began in the crown and progressed horizontally and vertically, and that a severe radiolucent lesion extensively expanded to the entire crown, corresponding to a macroscopically deleted molar. The caries had gradually developed mainly in the second mandibular molar from more than 3.5 months of age, while none were seen in any rats before that time. The WBN/KobSlc rats were caries-susceptible even to the standard laboratory diet, and pancreatitis was not directly associated with the onset of dental caries in this strain.

Wireless local area network for the dental office.

PubMed

Mupparapu, Muralidhar

2004-01-01

Dental offices are no exception to the implementation of new and advanced technology, especially if it enhances productivity. In a rapidly transforming digital world, wireless technology has a special place, as it has truly "retired the wire" and contributed to the ease and efficient access to patient data and other software-based applications for diagnosis and treatment. If the office or the clinic is networked, access to patient management software, imaging software and treatment planning tools is enhanced. Access will be further enhanced and unrestricted if the entire network is wireless. As with any new, emerging technology, there will be issues that should be kept in mind before adapting to the wireless environment. Foremost is the network security involved in the installation and use of these wireless networks. This short, technical manuscript deals with standards and choices in wireless technology currently available for implementation within a dental office. The benefits of each network security protocol available to protect patient data and boost the efficiency of a modern dental office are discussed.

Ethics and the electronic health record in dental school clinics.

PubMed

Cederberg, Robert A; Valenza, John A

2012-05-01

Electronic health records (EHRs) are a major development in the practice of dentistry, and dental schools and dental curricula have benefitted from this technology. Patient data entry, storage, retrieval, transmission, and archiving have been streamlined, and the potential for teledentistry and improvement in epidemiological research is beginning to be realized. However, maintaining patient health information in an electronic form has also changed the environment in dental education, setting up potential ethical dilemmas for students and faculty members. The purpose of this article is to explore some of the ethical issues related to EHRs, the advantages and concerns related to the use of computers in the dental operatory, the impact of the EHR on the doctor-patient relationship, the introduction of web-based EHRs, the link between technology and ethics, and potential solutions for the management of ethical concerns related to EHRs in dental schools.

75 FR 15675 - Professional Research Experience Program in Chemical Science and Technology Laboratory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... in physics, chemistry, mathematics, computer science, or engineering. Institutions should have a 4..., mathematics, computer science, or engineering with work experiences in laboratories or other settings...-0141-01] Professional Research Experience Program in Chemical Science and Technology Laboratory...

Dental Charting. Learning Activities, Unit Tests, Progress Chart, and Work Sheet.

ERIC Educational Resources Information Center

Texas Univ., Austin. Center for Occupational Curriculum Development.

These materials are part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. These student materials, designed to be used with the Dental Charting Student Manual, consist of learning activities, unit…

Dental Calculus Arrest of Dental Caries.

PubMed

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

PubMed Central

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Renewable energy technology development at Sandia National Laboratories

NASA Astrophysics Data System (ADS)

Klimas, P. C.

1994-02-01

The use of renewable energy technologies is typically thought of as an integral part of creating and sustaining an environment that maximizes the overall quality of life of the Earth's present inhabitants and does not leave an undue burden on future generations. Sandia National Laboratories has been a leader in developing many of these technologies over the last two decades. This paper describes innovative solar, wind and geothermal energy systems and components that Sandia is helping to bring to the marketplace. A common but special aspect of all of these activities is that they are conducted in partnership with non-federal government entities. A number of these partners are from New Mexico.

Laser welding by dental Nd:YAG device

NASA Astrophysics Data System (ADS)

Fornaini, Carlo; Bertrand, Caroline; Merigo, Elisabetta; Bonanini, Mauro; Rocca, Jean-Paul; Nammour, Samir

2009-06-01

Welding laser was introduced in jewellery during years 70 and, just after, was successfully used also by dental technicians. Welding laser gives a great number of advantages, versus traditional welding and, for this reason, this procedure had a great diffusion in the technician laboratories and stimulated the companies to put in the market more and more evolutes appliances. Some aspects, such great dimensions, high costs and delivery system today still characterize these machines by fixed lenses, which have strictly limited its use only to technician laboratories. The aim of this study is to demonstrate the possibility, by using a fibber-delivered laser normally utilized in the dental office, to make, by dentist himself in his office, welding on different metals and to evaluate advantages and possibilities of this new technique.

Integration of National Laboratory and Low-Activity Waste Pre-Treatment System Technology Service Providers - 16435

DOE Office of Scientific and Technical Information (OSTI.GOV)

Subramanian, Karthik H.; Thien, Michael G.; Wellman, Dawn M.

The National Laboratories are a critical partner and provide expertise in numerous aspects of the successful execution of the Direct-Feed Low Activity Waste Program. The National Laboratories are maturing the technologies of the Low-Activity Waste Pre-Treatment System (LAWPS) consistent with DOE Order 413.3B “Program and Project Management for the Acquisition of Capital Assets” expectations. The National Laboratories continue to mature waste forms, i.e. glass and secondary waste grout, for formulations and predictions of long-term performance as inputs to performance assessments. The working processes with the National Laboratories have been developed in procurements, communications, and reporting to support the necessary delivery-basedmore » technology support. The relationship continues to evolve from planning and technology development to support of ongoing operations and integration of multiple highly coordinated facilities.« less

Integrating photo-stimulable phosphor plates into dental and dental hygiene radiography curricula.

PubMed

Tax, Cara L; Robb, Christine L; Brillant, Martha G S; Doucette, Heather J

2013-11-01

It is not known whether the integration of photo-stimulable phosphor (PSP) plates into dental and dental hygiene curricula creates unique learning challenges for students. The purpose of this two-year study was to determine if dental hygiene students had more and/or different types of errors when using PSP plates compared to film and whether the PSP imaging plates had any particular characteristics that needed to be addressed in the learning process. Fifty-nine first-year dental hygiene students at one Canadian dental school were randomly assigned to two groups (PSP or film) before exposing their initial full mouth series on a teaching manikin using the parallel technique. The principal investigator determined the number and types of errors based on a specific set of performance criteria. The two groups (PSP vs. film) were compared for total number and type of errors made. Results of the study indicated the difference in the total number of errors made using PSP or film was not statistically significant; however, there was a difference in the types of errors made, with the PSP group having more horizontal errors than the film group. In addition, the study identified a number of unique characteristics of the PSP plates that required special consideration for teaching this technology.

General dental practitioners' knowledge of polymerisation of resin-based composite restorations and light curing unit technology.

PubMed

Santini, A; Turner, S

2011-09-23

Clinical successful use of resin-based composite restorations (RBCs) depends on knowledge of material and light curing unit (LCU) related factors. The purpose of this study was to evaluate general dental practitioners' knowledge of polymerisation of RBCs and LCU technology. Members of the Active Research Group of the Faculty of General Dental Practice (UK) in England, Scotland and Wales engaged in primary dental care were sent a letter introducing the study and asking for their cooperation, followed by an email containing a link to the online survey questionnaire, hosted on Surveymonkey.com. The questionnaire enquired about current LCUs, and asked a series of questions on material science. Sixty-six percent of the 274 members contacted responded. Fifty-seven percent used LED units, 25% quartz tungsten halogen (QTH), and 1% plasma arc (missing: 17%). Thirty percent reported having access to a radiometer. Appropriate responses regarding the degree of conversion of composite and adhesive materials were given by 32% and 23% respectively, and 22% agreed that LED and QTH LCUs had comparable efficiency in polymerising composites. Thirty-three percent were aware that RBCs eluted substances that may have adverse local or systemic consequences. Fifty-eight percent stated that if polymerisation of RBC is slowed down, polymerisation stress will be lower, and 43% said that polymerisation shrinkage will be reduced if the degree of conversion is reduced. Knowledge (measured by appropriate responses to these questions) was not related to years since qualification (r=-0.05, n=168, p=0.53). The study suggests that dentists' knowledge of curing RBC restorations and LCUs is poor. This indicates that there is a need for training and guidance in this aspect of primary dental care.

Bluetooth technology for prevention of dental caries.

PubMed

Kolahi, Jafar; Fazilati, Mohamad

2009-12-01

Caries is caused when the pH at the tooth surface drops below 5.5. A miniaturized and autonomous pH monitoring nodes can be attached to the tooth surface, like a tooth jewel. This intelligent sensor includes three components: (a) digital micro pH meter, (b) power supply, (c) wireless communicating device. The micro pH meter facilitates long term tooth surface pH monitoring and providing real time feedback to the patients and dental experts. Power supply of this system will be microfabricated biocatalytic fuel cell (enzymatic micro-battery) using organic compounds (e.g. formate or glucose) as the fuel to generate electricity. When micro pH meter detects the pH lower than 5.5, wireless Bluetooth device sends a caution (e.g. "you are at risk of dental caries") to external monitoring equipment such as mobile phone or a hands-free heads. After reception of the caution, subjects should use routine brushing and flossing procedure or use a medicated chewing gum (e.g. chlorhexidine containing chewing gum) or rinse with a mouthwash.

77 FR 68752 - Notice of Intent To Grant Exclusive License Between National Energy Technology Laboratory and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... Technology Laboratory and Corrosion Solutions AGENCY: National Energy Technology Laboratory, Department of... diffusion coating to a metallic alloy,'' to Corrosion Solutions having its principal place of business in... for filing written objections. Corrosion Solutions, a new small business, has applied for an exclusive...

Environmental Technology (Laboratory Analysis and Environmental Sampling) Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Hinojosa, Oscar V.; Guillen, Alfonso

A project assessed the need and developed a curriculum for environmental technology (laboratory analysis and environmental sampling) in the emerging high technology centered around environmental safety and health in Texas. Initial data were collected through interviews by telephone and in person and through onsite visits. Additional data was…

A review of the use of simulation in dental education.

PubMed

Perry, Suzanne; Bridges, Susan Margaret; Burrow, Michael Francis

2015-02-01

In line with the advances in technology and communication, medical simulations are being developed to support the acquisition of requisite psychomotor skills before real-life clinical applications. This review article aimed to give a general overview of simulation in a cognate field, clinical dental education. Simulations in dentistry are not a new phenomenon; however, recent developments in virtual-reality technology using computer-generated medical simulations of 3-dimensional images or environments are providing more optimal practice conditions to smooth the transition from the traditional model-based simulation laboratory to the clinic. Evidence as to the positive aspects of virtual reality include increased effectiveness in comparison with traditional simulation teaching techniques, more efficient learning, objective and reproducible feedback, unlimited training hours, and enhanced cost-effectiveness for teaching establishments. Negative aspects have been indicated as initial setup costs, faculty training, and the lack of a variety of content and current educational simulation programs.

Cone beam computed tomography in dental education: a survey of US, UK, and Australian dental schools.

PubMed

Parashar, Vijay; Whaites, Eric; Monsour, Paul; Chaudhry, Jahanzeb; Geist, James R

2012-11-01

Cone beam computed tomography (CBCT) is an excellent three-dimensional (3D) imaging modality. Traditional dental education has focused on teaching conventional (2D) imaging. The aims of this survey-based study were therefore to evaluate the incorporation of CBCT teaching in both the predoctoral/undergraduate (D.D.S./D.M.D./B.D.S.) and postgraduate/residency specialty training curricula in dental schools in the United States, the United Kingdom, and Australia. A nine-question survey form was electronically mailed to fifty-seven schools in the United States, sixteen schools in the United Kingdom, and seven schools in Australia. Fifty U.S. dental schools (89 percent), ten U.K. dental schools (62.5 percent), and one Australian dental school (14 percent) presently have CBCT equipment. The majority of responding schools do not include instruction in higher level use of this technology for undergraduate/predoctoral students, raising questions as to whether these students are adequately trained on qualification. Larger numbers of schools reported providing this training to residents in specialty programs. A similar trend was noticed in U.S., British, and Australian dental education. If general dentists are to be permitted to purchase and use CBCT equipment, inclusion of CBCT in dental education is an absolute requirement to prepare future dental practitioners to apply 3D imaging appropriately for diagnosis and treatment planning.

Initiating the 2002 Mars Science Laboratory (MSL) Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.; Henderson, Rebecca

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to investigate the Martian environment and requires new capabilities that are currently are not available. The MSL Technology Program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by JPL and is divided into a Focused Program and a Base Program. The MSL Technology Program is under the focused program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology's requirements and the development process are tightly coordinated with the Project. The MSL Technology Program combines the proven management techniques of flight projects with the commercial technology management strategies of industry and academia, to create a technology management program that meets the short-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment. This paper also provides an update of the 2003 MSL technology program and examines some of the drivers that changed the program from its initiation.

A Systematic Framework of Virtual Laboratories Using Mobile Agent and Design Pattern Technologies

ERIC Educational Resources Information Center

Li, Yi-Hsung; Dow, Chyi-Ren; Lin, Cheng-Min; Chen, Sheng-Chang; Hsu, Fu-Wei

2009-01-01

Innovations in network and information technology have transformed traditional classroom lectures into new approaches that have given universities the opportunity to create a virtual laboratory. However, there is no systematic framework in existing approaches for the development of virtual laboratories. Further, developing a virtual laboratory…

[Difficulty influence factors of dental caries clinical treatment].

PubMed

Xuedong, Zhou; Junqi, Ling; Jingping, Liang; Jiyao, Li; Lei, Cheng; Qing, Yu; Yumei, Niu; Bin, Guo; Hui, Chen

2017-02-01

Dental caries is a major disease that threaten human's oral healthy severely with the characteristics of high incidence, low rate of treatment and high rate of retreatment. At present, restorative treatment remains the main method for caries treatment. With the development of the Minimally Invasive Cosmetic Dentistry (MICD), reasonable application of various treatment technologies, maximum preservation of tooth tissues and realizing the maximization of treatment effects become problems that call for immediate solution in dental clinics. In addition, there still exist a large number of old restorations that need standard retreatments. Here, some difficulty influence factors of dental caries clinical treatment such as systemic and oral factors, individual caries susceptibility, treatment technologies and materials, retreatment methods of old restorations and technique sensitivity are analyzed, and corresponding processing strategies are also put forward.

New leaders in dentistry: dental students.

PubMed

Hammer, Dan

2010-01-01

Leadership opportunities for dental students have opened dramatically in recent decades because of the humanistic approach to education that shares responsibility for learning between students and faculty and that values mutual respect. Technology has also had an effect because it creates instant access and global communities. This new student leadership is most apparent in the American Student Dental Association (ASDA), which recently developed a White Paper on ethics, assisted in the establishment of Student Professionalism and Ethics Clubs at schools, and is developing a policy on unsupervised dental care. Students are also demonstrating leadership in research; in dual degrees that enhance teaching and policy; and in community service and outreach.

Feline dental radiography and radiology: A primer.

PubMed

Niemiec, Brook A

2014-11-01

Information crucial to the diagnosis and treatment of feline oral diseases can be ascertained using dental radiography and the inclusion of this technology has been shown to be the best way to improve a dental practice. Becoming familar with the techniques required for dental radiology and radiography can, therefore, be greatly beneficial. Novices to dental radiography may need some time to adjust and become comfortable with the techniques. If using dental radiographic film, the generally recommended 'E' or 'F' speeds may be frustrating at first, due to their more specific exposure and image development requirements. Although interpreting dental radiographs is similar to interpreting a standard bony radiograph, there are pathologic states that are unique to the oral cavity and several normal anatomic structures that may mimic pathologic changes. Determining which teeth have been imaged also requires a firm knowledge of oral anatomy as well as the architecture of dental films/digital systems. This article draws on a range of dental radiography and radiology resources, and the benefit of the author's own experience, to review the basics of taking and interpreting intraoral dental radiographs. A simplified method for positioning the tubehead is explained and classic examples of some common oral pathologies are provided. © ISFM and AAFP 2014.

Establishing a laboratory model of dental unit waterlines bacterial biofilms using a CDC biofilm reactor.

PubMed

Yoon, Hye Young; Lee, Si Young

2017-11-01

In this study, a laboratory model to reproduce dental unit waterline (DUWL) biofilms was developed using a CDC biofilm reactor (CBR). Bacteria obtained from DUWLs were filtered and cultured in Reasoner's 2A (R2A) for 10 days, and were subsequently stored at -70°C. This stock was cultivated on R2A in batch mode. After culturing for five days, the bacteria were inoculated into the CBR. Biofilms were grown on polyurethane tubing for four days. Biofilm accumulation and thickness was 1.3 × 10 5  CFU cm -2 and 10-14 μm respectively, after four days. Bacteria in the biofilms included cocci and rods of short and medium lengths. In addition, 38 bacterial genera were detected in biofilms. In this study, the suitability and reproducibility of the CBR model for DUWL biofilm formation were demonstrated. The model provides a foundation for the development of bacterial control methods for DUWLs.

Current status, crisis and trends in Chinese dental technicians.

PubMed

Chaoyi, Ma; Liwei, Zheng; Li, Yue; Min, Zhou; Haiyang, Yu

2012-04-01

Chinese dental technicians play a significant role in the globalised market of dental prosthesis fabrication, but this subject has not been investigated in detail. The demand for dental prostheses increases as individuals pay increasing attention to their oral health. Therefore, it is important to investigate the status of Chinese dental technicians. To evaluate the current status of Chinese dental technicians. Dental technicians' resumés, which reveal information regarding dental technician manpower, degrees, working age and salary, etc., were analysed and compared with those abroad. We also estimated the future demands of dental technician manpower, and discussed some potential solutions. There are fewer dental technicians in China than in other developed countries; they are also of a lower standard. Male technicians outnumber females. The education level of technicians is insufficient, and the education programme is still in its exploratory stage. The development of dental technician teams in China represents both an opportunity and a challenge. It is important to move forward from the current situation to yield long-term development. This article provides information on the Chinese dental technology industry, identifies the problems and offers solutions for its development. © 2012 FDI World Dental Federation.

UDENTE (Universal Dental E-Learning) a golden opportunity for dental education.

PubMed

Reynolds, Patricia

2012-01-10

The incorporation of technological advancements in higher education has started to bridge the gap in local, national and global delivery of dental courses. This gap, including the global decrease in senior clinical academics, has influenced the development of new teaching and learning techniques. Institutional virtual learning environments (VLE) and other e-learning resources are now in higher demand. This paper describes how one such innovative solutions has been IVIDENT (International Virtual Dental School), has enabled secure and seamless access to high quality e-content and tools through an innovative, universal flexible learning platform. IVIDENT, now UDENTE (Universal Dental E-learning) has been shown to offer new learning experiences for students of dentistry, but its approach can apply across all educational domains. UDENTE also benefits staff as it allows them to contribute and access resources through peer reviewed publishing processes, which ensure the highest quality in education. UDENTE was developed thanks to a £2.3 million grant from the Higher Education Funding Council for England (HEFCE) and the Department of Health. http://www.udente.org. This academically led educational research project involved dental schools in seven countries. An initially scoping of requirements was followed by elaboration of the tools needed. Pilot testing of the tools, systems and learning resources in particular and the impact of the UDENTE in general were carried out. The pilots revealed evidence of positive impact of a space for learning, teaching, development and communication, with tools for planning of electives and administrative support. The results of these initial pilots have been positive and encouraging, describing UDENTE as an accessible, user friendly platform providing tools that otherwise would be difficult to access in a single space. However, attention to supporting faculty to embrace these new learning domains is essential if such technology enhanced

Inaugural Technology Showcase Draws Hundreds | Frederick National Laboratory for Cancer Research

Cancer.gov

Before a crowded auditorium of science and business professionals at the Frederick National Laboratory for Cancer Research’s Advanced Technology Research Facility (ATRF), Joost Oppenheim, M.D., had just finished his presentation about a compound th

The principles of Health Technology Assessment in laboratory medicine.

PubMed

Liguori, Giorgio; Belfiore, Patrizia; D'Amora, Maurizio; Liguori, Renato; Plebani, Mario

2017-01-01

The Health Technology Assessment (HTA) is a multi-professional and multidisciplinary evaluation approach designed to assess health technology in the broadest sense of the term, from its instruments to the rearranging of its organizational structures. It is by now an established methodology at national and international levels that involves several medical disciplines thanks to its versatility. Laboratory medicine is one of these disciplines. Such specialization was subjected, in recent years, to deep changes even from an organizational standpoint, in order to meet the health needs of the population, making them as effective and cost-effective as possible. In this regard, HTA was the tool used to assess implications in different areas.

Stress Analysis on the Bone Around Five Different Dental Implants

DTIC Science & Technology

2001-10-25

University of Science and Technology, Tehran, IRAN Abstract- Implantology has a widespread application in dental cases these days. Although the life...System, in Mackinny RV: Endosteal Dental Implant, Mosby Year Book, 1991 [3] Weiss M, Titanium Fiber-Mesh Metal Implant, J. Oral Implantology , 1986...STRESS ANALYSIS ON THE BONE AROUND FIVE DIFFERENT DENTAL IMPLANTS S. M. Rajaai, S. Khorrami-mehr School of mechanical Engineering Iran

Therapeutic potential of dental stem cells

PubMed Central

Chalisserry, Elna Paul; Nam, Seung Yun; Park, Sang Hyug; Anil, Sukumaran

2017-01-01

Stem cell biology has become an important field in regenerative medicine and tissue engineering therapy since the discovery and characterization of mesenchymal stem cells. Stem cell populations have also been isolated from human dental tissues, including dental pulp stem cells, stem cells from human exfoliated deciduous teeth, stem cells from apical papilla, dental follicle progenitor cells, and periodontal ligament stem cells. Dental stem cells are relatively easily obtainable and exhibit high plasticity and multipotential capabilities. The dental stem cells represent a gold standard for neural-crest-derived bone reconstruction in humans and can be used for the repair of body defects in low-risk autologous therapeutic strategies. The bioengineering technologies developed for tooth regeneration will make substantial contributions to understand the developmental process and will encourage future organ replacement by regenerative therapies in a wide variety of organs such as the liver, kidney, and heart. The concept of developing tooth banking and preservation of dental stem cells is promising. Further research in the area has the potential to herald a new dawn in effective treatment of notoriously difficult diseases which could prove highly beneficial to mankind in the long run. PMID:28616151

An Analysis of Medical Laboratory Technology Journals' Instructions for Authors.

PubMed

Horvat, Martina; Mlinaric, Ana; Omazic, Jelena; Supak-Smolcic, Vesna

2016-08-01

Instructions for authors (IFA) need to be informative and regularly updated. We hypothesized that journals with a higher impact factor (IF) have more comprehensive IFA. The aim of the study was to examine whether IFA of journals indexed in the Journal Citation Reports 2013, "Medical Laboratory Technology" category, are written in accordance with the latest recommendations and whether the quality of instructions correlates with the journals' IF. 6 out of 31 journals indexed in "Medical Laboratory Technology" category were excluded (unsuitable or unavailable instructions). The remaining 25 journals were scored based on a set of 41 yes/no questions (score 1/0) and divided into four groups (editorial policy, research ethics, research integrity, manuscript preparation) by three authors independently (max score = 41). We tested the correlation between IF and total score and the difference between scores in separate question groups. The median total score was 26 (21-30) [portion of positive answers 0.63 (0.51-0.73)]. There was no statistically significant correlation between a journal's IF and the total score (rho = 0.291, P = 0.159). IFA included recommendations concerning research ethics and manuscript preparation more extensively than recommendations concerning editorial policy and research integrity (Ht = 15.91, P = 0.003). Some policies were poorly described (portion of positive answers), for example: procedure for author's appeal (0.04), editorial submissions (0.08), appointed body for research integrity issues (0.08). The IF of the "Medical Laboratory Technology" journals does not reflect a journals' compliance to uniform standards. There is a need for improving editorial policies and the policies on research integrity.

The training and support needs of faculty and students using a health information technology system were significant: a case study in a dental school.

PubMed

Hill, Heather K; Stewart, Denice C L; Ash, Joan S

2010-11-13

Health Information Technology Systems (HITS) are becoming more widely integrated into patient care in the dental school setting. The purpose of this study was to evaluate the impact of a chairside HITS on users in the dental school setting. Qualitative techniques, including interviews, focus groups and observations, were used. Using grounded theory, we saw 9 themes emerge. One theme of particular interest was that "training and support needs of end-users were significant." This paper explores this theme in detail and discusses the implications.

Laboratory evaluation of advanced battery technologies for electric vehicle applications

NASA Astrophysics Data System (ADS)

Deluca, W. H.; Kulaga, J. E.; Hogrefe, R. L.; Tummilo, A. F.; Webster, C. E.

1989-03-01

During 1988, battery technology evaluations were performed for the Department of Energy and Electric Power Research Institute at the Argonne Analysis and Diagnostic Laboratory. Cells and multicell modules from four developers were examined to determine their performance and life characteristics for electric vehicle propulsion applications. The results provide an interim measure of the progress being made in battery R and D programs, a comparison of battery technologies, and a source of basic data for modeling and continuing R and D. This paper summarizes the performance and life characterizations of twelve single cells and six 3- to 24-cell modules that encompass four technologies (Na/S, Ni/Fe, lead-acid, and Fe/Air).

Perceived oral health status and treatment needs of dental auxiliaries.

PubMed

Azodo, Clement C; Ehizele, Adebola O; Umoh, Agnes; Ojehanon, Patrick I; Akhionbare, Osagie; Okechukwu, Robinson; Igbinosa, Lawrence

2010-03-15

To determine the perceived oral health status and treatment needs of Nigerian dental therapists in training and dental technology students. A descriptive cross-sectional study of students from Federal School of Dental Therapy and Technology Enugu, Nigeria was conducted using self-administered questionnaire to obtain information on demography, self-reported oral health status, knowledge of impact of oral health on daily life activity, dental attendance and perceived dental need. The perception of oral health status and treatment need of the two groups of dental auxiliaries was the same. Fewer respondents (27.3%) rated their oral health as excellent, while 50.4% rated their oral health as good. Majority (95.5%) agreed that oral health is a part of general health and 94.6% agreed that oral health has a role in daily life. Out of 81.4% that had previous dental treatment, scaling and polishing accounted for 66.1%. Presently, 48.8% think they need dental treatment ranging from scaling and polishing (33.9%), tooth restoration (10.3%), to extraction (1.2%). This survey revealed that most of the students are aware that oral health is a component of general health and that it has an impact on an individual's daily life. More than half of the students perceived their oral health as good, but only a few knew that there is a need for a preventive approach to oral health as evident by the percentage that perceived scaling and polishing as a treatment need.

Use of information and communication technology among dental students at the University of Jordan.

PubMed

Rajab, Lamis D; Baqain, Zaid H

2005-03-01

The aim of this study was to investigate the current knowledge, skills, and opinions of undergraduate dental students at the University of Jordan with respect to information communication technology (ICT). Dental students from the second, third, fourth, and fifth years were asked to complete a questionnaire presented in a lecture at the end of the second semester in the 2002-03 academic year. The response rate was 81 percent. Besides free and unlimited access to computers at the school of dentistry, 74 percent of the students had access to computers at home. However, 44 percent did not use a computer regularly. Male students were more regular and longer users of computers than females (p<0.001). A significant number of students (70 percent) judged themselves competent in information technology (IT) skills. More males felt competent in basic IT skills than did females (p<0.05). More than two-thirds acquired their computer skills through sources other than at the university. The main educational use of computers was accessing the Internet, word processing, multimedia, presentations, Medline search, and data management. More clinical students felt competent in word-processing skills (p<0.05) and many more used word processing for their studies (p<0.001) than did preclinical students. More males used word processing for their studies than females (p<0.001). Students used computers for personal activities more frequently than for academic reasons. More males used computers for both academic (p<0.01) and personal activities (p<0.001) than did females. All students had access to the Internet at the university, and 54 percent had access at home. A high percentage of students (94 percent) indicated they were comfortable using the Internet, 75 percent said they were confident in the accuracy, and 80 percent said they were confident in the relevance of information obtained from the Internet. Most students (90 percent) used email. Most students (83 percent) supported the idea

Feasibility study of an orbiting laboratory for testing CSI technology

NASA Technical Reports Server (NTRS)

Bicos, Andrew S.; Loboda, Gregory G.

1993-01-01

A concept for an orbiting laboratory for testing Controls-Structures Integration (CSI) technology is described. The CSI-Star concept reflects a lower cost, higher risk approach. The concept supports demonstration and validation testing for critical CSI technologies at a cost of $20M to $26M with a 1-year reliability of approximately 0.9. The Ball Aerospace QuickStar bus is the carrier for the CSI test article. QuickStar is launched as a secondary payload on the McDonnell Douglas Delta 2. The QuickStar/Delta 2 approach is flight proven. The CSI test article is a 20 foot, 1 Hz, truss beam which is deployed from the QuickStar bus. The test article is well instrumented for quality system identification. The laboratory provides three layers of active control consisting of global vibration suppression along the truss beam, vibration isolation between the beam and instrument platforms, and vibration compensation through the use of gimbaled platforms which point lasers relative to optical sensor targets. The configuration simulates the dynamics of multi-instrument science platforms such as those of the Earth Observation System (EOS) while maintaining strong ties to astrophysics missions such as the Optical Interferometer. Uplink/downlink services and a reprogrammable computer provide flexibility for long-term investigations by members of the CSI community (NASA, DoD, academia, and industry). CSI-Star fills the gap between short-term experiments, which have been conducted primarily on the Shuttle, and future science missions which require the technology. The on-orbit maturity of CSI technology must be established to obtain acceptance by project managers and to promote injection of the technology into future science missions.

Applications of Mesenchymal Stem Cells in Sinus Lift Augmentation as a Dental Implant Technology.

PubMed

Parnia, Feridoun; Yazdani, Javad; Maleki Dizaj, Solmaz

2018-01-01

The potential application of stem cell biology in human dentistry is a new and emerging field of research. The objective of the current review was to study the efficiency of mesenchymal stem cells (MSCs) in sinus lift augmentation (SLA). A literature review was performed in PubMed Central using MeSH keywords such as sinus lift, MSCs, dental implants, and augmentation. The searches involved full-text papers written in English, published in the past 10 years (2007-2017). The review included in vitro and in vivo studies on the use of MSCs in SLA. Electronic searching provided 45 titles, and among them, 8 papers were chosen as suitable based on the inclusion requirements of this review. The reviewed studies have revealed the potential of MSCs in SLA. According to these papers, stem cell therapy combined with different biomaterials may considerably improve bone regeneration in previous steps of dental implantation and may veritably lead to efficient clinical usages in the recent future. However, the identification of an ideal source of stem cells as well as long-term studies is vital to assess the success rate of this technology. Further clinical trials are also needed to approve the potential of MSCs in SLA.

[Dental technician's pneumoconiosis; a case report].

PubMed

Karaman Eyüboğlu, Canan; Itil, Oya; Gülşen, Aşkin; Kargi, Aydanur; Cimrin, Arif

2008-01-01

Since 1939, it has been known that, silicosis and extrinsic allergic alveolitis can be seen among dental technicians. The interstitial disease caused by the exposure to complex substances used by dental technicians is classified as a special group called dental technician's pneumoconiosis. A 36-year-old man, who has no smoking history, presented with severe dyspnea. He had worked in different dental laboratories for 22 years, but he did not have respiratory symptoms until five years ago. After that date, he had hospitalized and had been examined for respiratory pathologies for many times. He had came to our clinic, because of the progression of his dyspnea. Diffuse pulmonary parenchymal infiltrates which can be related with pneumoconiosis and chronic type 1 respiratory deficiency had been diagnosed as the result of the examinations. While he has no history of smoking or any other risk factors or diseases in his medical history, the case was accepted as dental technician's pneumoconiosis. The factors related with the pathogenesis of dental technician's pneumoconiosis are; the complex compound of the substances (metal dusts, silica, plaster, wax and resins, chemical liquids, methyl methacrylate) used in this sector and their effects on the lung parenchyma. Extrinsic allergic alveolitis related with methyl methacrylate has been reported. The most important factor to acquire an occupational lung disease is a complex occupational exposure. The insufficient workplace airing and the lack of preventive measures added on this exposure, the risks become much more greater.

Dental Fear among Medical and Dental Undergraduates

PubMed Central

Hakim, H.; Razak, I. A.

2014-01-01

Objective. To assess the prevalence and level of dental fear among health related undergraduates and to identify factors causing such fear using Kleinknecht's Dental Fear Survey (DFS) questionnaire. Methods. Kleinknecht's DFS questionnaire was used to assess dental fear and anxiety among the entire enrollment of the medical and dental undergraduates' of the University of Malaya. Results. Overall response rate was 82.2%. Dental students reported higher prevalence of dental fear (96.0% versus 90.4%). However, most of the fear encountered among dental students was in the low fear category as compared to their medical counterpart (69.2 versus 51.2%). Significantly more medical students cancelled dental appointment due to fear compared to dental students (P = 0.004). “Heart beats faster” and “muscle being tensed” were the top two physiological responses experienced by the respondents. “Drill” and “anesthetic needle” were the most fear provoking objects among respondents of both faculties. Conclusion. Dental fear and anxiety are a common problem encountered among medical and dental undergraduates who represent future health care professionals. Also, high level of dental fear and anxiety leads to the avoidance of the dental services. PMID:25386615

Dental Arch Wire

NASA Technical Reports Server (NTRS)

1979-01-01

Straightening teeth is an arduous process requiring months, often years, of applying corrective pressure by means of arch wires-better known as brace-which may have to be changed several times in the course of treatment. A new method has been developed by Dr. George Andreasen, orthodontist and dental scientist at the University of Iowa. The key is a new type of arch wire material, called Nitinol, with exceptional elasticity which helps reduce the required number of brace changes. An alloy of nickel and titanium, Nitinol was originally developed for aerospace applications by the Naval Ordnance Laboratory, now the Naval Surface Weapons Laboratory, White Oaks, Maryland. NASA subsequently conducted additional research on the properties of Nitinol and on procedures for processing the metal.

Uncovering dental implants using a new thermo-optically powered (TOP) technology with tissue air-cooling.

PubMed

Romanos, Georgios E; Belikov, Andrey V; Skrypnik, Alexei V; Feldchtein, Felix I; Smirnov, Michael Z; Altshuler, Gregory B

2015-07-01

Uncovering implants with lasers, while bloodless, has been associated with a risk of implant and bone overheating. The present study evaluated the effect of using a new generation of high-power diode lasers on the temperature of a dental implant and the surrounding tissues using an in vitro model. The implant temperature was measured at three locations using micro thermocouples. Collateral thermal damage of uncovered soft tissues was evaluated using NTBC stain. Implant temperature rise during and collateral thermal soft-tissue damage following implant uncovering with and without tissue air-cooling was studied using both the classic operational mode and the new thermo-optically powered (TOP) technology. For the classic surgical mode using a cork-initiated tip and constant laser power set at 3.4 W, the maximum temperature rise in the coronal and apical parts of the implant was 23.2 ± 4.1°С and 9.5 ± 1.8°С, respectively, while 1.5 ± 0.5 mm of collateral thermal damage of the soft tissue surrounding the implant model occurred. Using the TOP surgical tip with constant laser power reduced implant overheating by 30%; collateral thermal soft-tissue damage was 0.8 ± 0.2 mm. Using the TOP surgical mode with a tip temperature setting of 800°C and air-cooling reduced the implant temperature rise by more than 300%, and only 0.2 ± 0.1 mm of collateral thermal soft-tissue damage occurred, typical for optimized CO2 laser surgery. Furthermore, use of the new generation diode technology (TOP surgical mode) appeared to reduce the time required for implant uncovering by a factor of two, compared to the standard surgical mode. Use of the new generation diode technology (TOP surgical mode) may significantly reduce overheating of dental implants during uncovering and seems to be safer for the adjacent soft and hard tissues. Use of such diode lasers with air-cooling can radically reduce the rise in implant temperatures (by more than three times

Developing Common Competencies for Southeast Asian General Dental Practitioners.

PubMed

Chuenjitwongsa, Supachai; Poolthong, Suchit; Bullock, Alison; Oliver, Richard G

2017-09-01

Current policy in Southeast Asian dental education focuses on high-quality dental services from new dental graduates and the free movement of dental practitioners across the region. The Southeast Asian Nations (ASEAN) Dental Councils have proposed the "Common Major Competencies for ASEAN General Dental Practitioners" to harmonize undergraduate dental education. This article discusses how the ASEAN competencies were developed and established to assist the development of general dental practitioners with comparable knowledge, skills, and attitudes across ASEAN. The competencies were developed through four processes: a questionnaire about current national oral health problems, a two-round Delphi process that sought agreement on competencies, a panel discussion by representatives from ASEAN Dental Councils, and data verification by the representatives after the meeting. Key themes of the ASEAN competencies were compared with the competencies from the U.S., Canada, Europe, Australia, and Japan. A total of 33 competency statements, consistent with other regions, were agreed upon and approved. Factors influencing the ASEAN competencies and their implementation include oral health problems in ASEAN, new knowledge and technology in dentistry, limited institutional resources, underregulated dental schools, and uneven distribution of dental practitioners. The ASEAN competencies will serve as the foundation for further developments in ASEAN dental education including policy development, curriculum revision, quality assurance, and staff development. Collaboration amongst stakeholders is essential for successful harmonization of ASEAN dental education.

Endoscopic near-infrared dental imaging with indocyanine green: a pilot study.

PubMed

Li, Zhongqiang; Yao, Shaomian; Xu, Jian; Wu, Ye; Li, Chunhong; He, Ziying

2018-06-01

Current dental diagnosis, especially tooth abnormalities, relies largely on X-ray-based imaging, a technique that requires specialized skills and suffers from ionizing radiation. Here, we present a pilot study in rats of an efficient, ionizing-radiation-free and easy-to-use alternative for dental imaging. Postnatal rats at different ages were injected with indocyanine green and molars were imaged by a laboratory-designed endoscopic near-infrared (NIR) dental imaging system. The results indicate that the endoscopic NIR dental imaging can be used to observe the morphology of postnatal rat molars, especially at early postnatal stages when morphology of the molar is indistinguishable under visible conditions. A small abnormal cusp was observed and distinguished from the normal cusps by the NIR dental imaging system. Dental structures, such as unerupted molars, can be imaged as soon as 10 min after the injection of indocyanine green; imaging after 24 h shows improved imaging contrast. Overall, the endoscopic NIR fluorescence dental imaging system described here may be useful in dental research; this technique may serve as a safe, real-time imaging tool for dental diagnosis and treatment beyond experimental systems in the future. © 2018 New York Academy of Sciences.

32 CFR 199.13 - TRICARE Dental Program.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., beneficiary pre-authorization and marketing procedures, and care for beneficiaries residing in distant areas... examinations; and (iii) Diagnostic laboratory tests and examinations provided in connection with other dental...) Initial determination. A formal written decision on a TDP claim, a request for TDP benefit pre...

32 CFR 199.13 - TRICARE Dental Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., beneficiary pre-authorization and marketing procedures, and care for beneficiaries residing in distant areas... examinations; and (iii) Diagnostic laboratory tests and examinations provided in connection with other dental...) Initial determination. A formal written decision on a TDP claim, a request for TDP benefit pre...

Knowledge and Awareness of Teledentistry among Dental Professionals - A Cross Sectional Study.

PubMed

Boringi, Mamatha; Waghray, Shefali; Lavanya, Reddy; Babu, Dara Balaji Gandhi; Badam, Raj Kumar; Harsha, Niharika; Garlapati, Komali; Chavva, Sunanda

2015-08-01

The use of technology in the form of smart phones and other electronic media in day to day life has become an integral part of life today. Technology today is seeing a paradigm shift towards better inter-professional communications which can help doctors, patients and the masses as a whole. Putting these technological advancements to good use evolves as a major milestone in medicine/ dentistry in the form of telemedicine/teledentistry. The present study was aimed at knowing the knowledge and awareness of teledentistry among dental professionals of a dental college in India. The study was conducted in a dental college in India and was circulated among dental professionals. A questionnaire was prepared to assess the knowledge and awareness of teledentistry and was circulated among dental professionals in a dental college. The data thus collected was statistically analysed and results obtained. The data collected was statistically analysed using SPSS software. A total of 406 persons responded to the questionnaire. In the present study it was found that the knowledge and awareness about teledentistry was very low among post graduates (7.23%) and interns (9.38%) when compared to I & II BDS while most of them agreed that teledentistry is a practice of dentistry through various media options with limited application in dentistry without a legal issue. In the present study, it was apparent that most of the respondents were lacking adequate knowledge and awareness on teledentistry. Hence, there is an immense need to create awareness among dental professionals on teledentistry as the future lies in technological advancement. Tele dentistry can mark the beginning of a new era in dentistry. This can be achieved by conducting CDE programs and awareness campaigns/programs which helps in various levels.

Promoting Rapid Learning in the Histology Laboratory by Integrating Technology

ERIC Educational Resources Information Center

Shields, Vonnie

2008-01-01

This paper describes the results of incorporating technology in the histology laboratory by using high-resolution video-imaging equipment (VIE). The study sought to determine if (1) the VIE would allow students to more easily and rapidly find histological structures over more conventional methods, and (2) if they could find the structures with the…

Ultralow Dose MSCT Imaging in Dental Implantology

PubMed Central

Widmann, Gerlig; Al-Ekrish, Asma'a A.

2018-01-01

Introduction: The Council Directive 2013/59 Euratom has a clear commitment for keeping medical radiation exposure as low as reasonably achievable and demands a regular review and use of diagnostic reference levels. Methods: In dental implantology, the range of effective doses for cone beam computed tomography (CBCT) shows a broad overlap with multislice computed tomography (MSCT). More recently, ultralow dose imaging with new generations of MSCT scanners may impart radiation doses equal to or lower than CBCT. Dose reductions in MSCT have been further facilitated by the introduction of iterative image reconstruction technology (IRT), which provides substantial noise reduction over the current standard of filtered backward projection (FBP). Aim: The aim of this article is to review the available literature on ultralow dose CT imaging and IRTs in dental implantology imaging and to summarize their influence on spatial and contrast resolution, image noise, tissue density measurements, and validity of linear measurements of the jaws. Conclusion: Application of ultralow dose MSCT with IRT technology in dental implantology offers the potential for very large dose reductions compared with standard dose imaging. Yet, evaluation of various diagnostic tasks related to dental implantology is still needed to confirm the results obtained with various IRTs and ultra-low doses so far. PMID:29492174

Laboratory Testing of Electro-Osmotic Pulse Technology to Reduce and Maintain Low Moisture Content in Concrete

DTIC Science & Technology

2009-02-01

technology minimizes harmful effects to concrete and rebar and prevents over drying, pore blocking and electrode polarization. Principles of EOP...LABORATORY TESTING OF ELECTRO-OSMOTIC PULSE TECHNOLOGY TO REDUCE AND MAINTAIN LOW MOISTURE CONTENT IN CONCRETE Orange S. Marshall, Vincent F...Laboratory 2009 Army Corrosion Summit Clearwater Beach, FL 6 January 2009 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting

DCTune Perceptual Optimization of Compressed Dental X-Rays

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Null, Cynthia H. (Technical Monitor)

1997-01-01

In current dental practice, x-rays of completed dental work are often sent to the insurer for verification. It is faster and cheaper to transmit instead digital scans of the x-rays. Further economies result if the images are sent in compressed form. DCtune is a technology for optimizing DCT quantization matrices to yield maximum perceptual quality for a given bit-rate, or minimum bit-rate for a given perceptual quality. In addition, the technology provides a means of setting the perceptual quality of compressed imagery in a systematic way. The purpose of this research was, with respect to dental x-rays: (1) to verify the advantage of DCTune over standard JPEG; (2) to verify the quality control feature of DCTune; and (3) to discover regularities in the optimized matrices of a set of images. Additional information is contained in the original extended abstract.

Applications of Nanomaterials in Dental Science: A Review.

PubMed

Sharan, Jitendra; Singh, Shivani; Lale, Shantanu V; Mishra, Monu; Koul, Veena; Kharbanda, P

2017-04-01

Nanotechnology has revolutionized health care industry in a large scale and its applications are a boon to modern medicine and dental science. It is expected to pervade and further revolutionize the art and science of dentistry and may well have important applications spanning all the aspects of oral diseases, diagnosis, prevention and treatment. Materials science in dentistry has embraced the technology to produce nanomaterials that are being used in caries inhibitors, antimicrobial resins, hard tissue remineralizing agents, targeted drug delivery, scaffolds, bio-membranes, nanocrystalline hydroxyl apatite, restorative cements, adhesion promoters and boosters, bioactive glass, tissue conditioners, reinforced methacrylate resins, root canal disinfectants, friction free orthodontic arch wires and nano composites life. These upcoming technologies have potential to bring about significant benefits in the form of improvement in dental science and to society. The present review presents the latest recent developments in this interdisciplinary field bridging nanotechnology and dental science.

77 FR 69550 - Proposed Information Collection (Dental Record Authorization and Invoice for Outpatient Services...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0335] Proposed Information Collection (Dental... the notice. This notice solicits comments on the information needed to determine a veteran's dental... collection techniques or the use of other forms of information technology. Title: Dental Record Authorization...

Bacterial interactions in dental biofilm development.

PubMed

Hojo, K; Nagaoka, S; Ohshima, T; Maeda, N

2009-11-01

Recent analyses with ribosomal RNA-based technologies have revealed the diversity of bacterial populations within dental biofilms, and have highlighted their important contributions to oral health and disease. Dental biofilms are exceedingly complex and multispecies ecosystems, where oral bacteria interact cooperatively or competitively with other members. Bacterial interactions that influence dental biofilm communities include various different mechanisms. During the early stage of biofilm formation, it is known that planktonic bacterial cells directly attach to surfaces of the oral cavity or indirectly bind to other bacterial cells that have already colonized. Adherence through co-aggregation may be critical for the temporary retention of bacteria on dental surfaces, and may facilitate eventual bacterial colonization. It is likely that metabolic communication, genetic exchange, production of inhibitory factors (e.g., bacteriocins, hydrogen peroxide, etc.), and quorum-sensing are pivotal regulatory factors that determine the bacterial composition and/or metabolism. Since each bacterium can easily access a neighboring bacterial cell and its metabolites, genetic exchanges and metabolic communication may occur frequently in dental biofilms. Quorum-sensing is defined as gene regulation in response to cell density, which influences various functions, e.g., virulence and bacteriocin production. In this review, we discuss these important interactions among oral bacteria within the dental biofilm communities.

Dental impressions using 3D digital scanners: virtual becomes reality.

PubMed

Birnbaum, Nathan S; Aaronson, Heidi B

2008-10-01

The technologies that have made the use of three-dimensional (3D) digital scanners an integral part of many industries for decades have been improved and refined for application to dentistry. Since the introduction of the first dental impressioning digital scanner in the 1980s, development engineers at a number of companies have enhanced the technologies and created in-office scanners that are increasingly user-friendly and able to produce precisely fitting dental restorations. These systems are capable of capturing 3D virtual images of tooth preparations, from which restorations may be fabricated directly (ie, CAD/CAM systems) or fabricated indirectly (ie, dedicated impression scanning systems for the creation of accurate master models). The use of these products is increasing rapidly around the world and presents a paradigm shift in the way in which dental impressions are made. Several of the leading 3D dental digital scanning systems are presented and discussed in this article.

Load Disaggregation Technologies: Real World and Laboratory Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayhorn, Ebony T.; Sullivan, Greg P.; Petersen, Joseph M.

Low cost interval metering and communication technology improvements over the past ten years have enabled the maturity of load disaggregation (or non-intrusive load monitoring) technologies to better estimate and report energy consumption of individual end-use loads. With the appropriate performance characteristics, these technologies have the potential to enable many utility and customer facing applications such as billing transparency, itemized demand and energy consumption, appliance diagnostics, commissioning, energy efficiency savings verification, load shape research, and demand response measurement. However, there has been much skepticism concerning the ability of load disaggregation products to accurately identify and estimate energy consumption of end-uses; whichmore » has hindered wide-spread market adoption. A contributing factor is that common test methods and metrics are not available to evaluate performance without having to perform large scale field demonstrations and pilots, which can be costly when developing such products. Without common and cost-effective methods of evaluation, more developed disaggregation technologies will continue to be slow to market and potential users will remain uncertain about their capabilities. This paper reviews recent field studies and laboratory tests of disaggregation technologies. Several factors are identified that are important to consider in test protocols, so that the results reflect real world performance. Potential metrics are examined to highlight their effectiveness in quantifying disaggregation performance. This analysis is then used to suggest performance metrics that are meaningful and of value to potential users and that will enable researchers/developers to identify beneficial ways to improve their technologies.« less

Delivery of laboratory data with World Wide Web technology.

PubMed

Hahn, A W; Leon, M A; Klein-Leon, S; Allen, G K; Boon, G D; Patrick, T B; Klimczak, J C

1997-01-01

We have developed an experimental World Wide Web (WWW) based system to deliver laboratory results to clinicians in our Veterinary Medical Teaching Hospital. Laboratory results are generated by the clinical pathology section of our Veterinary Medical Diagnostic Laboratory and stored in a legacy information system. This system does not interface directly to the hospital information system, and it cannot be accessed directly by clinicians. Our "meta" system first parses routine print reports and then instantiates the data into a modern, open-architecture relational database using a data model constructed with currently accepted international standards for data representation and communication. The system does not affect either of the existing legacy systems. Location-independent delivery of patient data is via a secure WWW based system which maximizes usability and allows "value-added" graphic representations. The data can be viewed with any web browser. Future extensibility and intra- and inter-institutional compatibility served as key design criteria. The system is in the process of being evaluated using accepted methods of assessment of information technologies.

Evaluation of Side Stream Filtration Technology at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Brian K.

2014-08-01

This technology evaluation was performed by Pacific Northwest National Laboratory and Oak Ridge National Laboratory on behalf of the Federal Energy Management Program. The objective was to quantify the benefits side stream filtration provides to a cooling tower system. The evaluation assessed the performance of an existing side stream filtration system at a cooling tower system at Oak Ridge National Laboratory’s Spallation Neutron Source research facility. This location was selected because it offered the opportunity for a side-by-side comparison of a system featuring side stream filtration and an unfiltered system.

Advances in dental materials.

PubMed

Fleming, Garry J P

2014-05-01

The dental market is replete with new resorative materials marketed on the basis of novel technological advances in materials chemistry, bonding capability or reduced operator time and/or technique sensitivity. This paper aims to consider advances in current materials, with an emphasis on their role in supporting contemporary clinical practice.

The Future of Allied Dental Education: Creating a Professional TEAM.

ERIC Educational Resources Information Center

Nash, David A.

1993-01-01

To prepare for the significant professional, technological, and demographic changes ahead, allied dental education should develop teams of dental professionals that are cost effective, efficient, and highly productive. Team leaders must be educated to acknowledge each member's unique role and affirm the importance of mutuality and reciprocity in…

Technology Being Developed at Lawrence Berkeley National Laboratory: Ultra-Low- Emission Combustion Technologies for Heat and Power Generation

NASA Technical Reports Server (NTRS)

Cheng, Robert K.

2001-01-01

The Combustion Technologies Group at Lawrence Berkeley National Laboratory has developed simple, low-cost, yet robust combustion technologies that may change the fundamental design concept of burners for boilers and furnaces, and injectors for gas turbine combustors. The new technologies utilize lean premixed combustion and could bring about significant pollution reductions from commercial and industrial combustion processes and may also improve efficiency. The technologies are spinoffs of two fundamental research projects: An inner-ring burner insert for lean flame stabilization developed for NASA- sponsored reduced-gravity combustion experiments. A low-swirl burner developed for Department of Energy Basic Energy Sciences research on turbulent combustion.

Burnout among clinical dental students at Jordanian universities.

PubMed

Badran, D H; Al-Ali, M H; Duaibis, R B; Amin, W M

2010-04-01

Dentistry is a profession demanding physical and mental efforts as well as people contact, which can result in burnout. The level of burnout among 307 clinical dental students in 2 Jordanian universities was evaluated using the Maslach Burnout Inventory survey. Scores for the inventory's 3 subscales were calculated and the mean values for the students' groups were computed separately. Dental students in both universities suffered high levels of emotional exhaustion and depersonalization. The dental students at the University of Jordan demonstrated a significantly higher level of emotional exhaustion than their counterparts at the Jordan University of Science and Technology.

Electronic curriculum implementation at North American dental schools.

PubMed

Hendricson, William D; Panagakos, Fotinos; Eisenberg, Elise; McDonald, James; Guest, Gary; Jones, Pamela; Johnson, Lynn; Cintron, Laura

2004-10-01

Electronic curriculum, or E-curriculum, refers to computer-based learning including educational materials available on CD or DVD, online courses, electronic mechanisms to search the literature, email, and various applications of instructional technology including providing laptops to students, multimedia projection systems, and Internet-compatible classrooms. In spite of enthusiasm about the potential for E-curriculum to enhance dental education, there is minimal guidance in the literature to assist schools with implementation. The study objectives were: 1) identify U.S. and Canadian dental schools that have initiated mandatory laptop programs and assess cost, faculty development issues, extent of curricular use, problems, and qualitative perceptions; 2) determine the extent to which twenty-two other E-curriculum resources were available and used at North American dental schools; and 3) identify factors that influenced E-curriculum implementation. A twenty-six item questionnaire, known as the Electronic Curriculum Implementation Survey (ECIS), was mailed to all sixty-six North American dental schools (ten Canadian and fifty-six U.S. schools) during 2002-03 with a response rate of 100 percent. Twenty-five of the twenty-six ECIS questions employed a menu-driven, forced choice format, but respondents could provide amplifying comments. Fifty-three questionnaires were completed by associate deans for academic affairs, three by deans, and ten by instructional technology (IT) managers, IT committee chairs, or directors of dental informatics departments. The survey found that E-curriculum implementation among North American dental schools is following the classic innovation pattern in which a few early adopting institutions proceed rapidly while the majority of potential adopters make modifications slowly. Fourteen U.S. dental schools have established mandatory laptop programs for students. Ten of these laptop programs were created in the past two years; respondents

The genome projects: implications for dental practice and education.

PubMed

Wright, J T; Hart, T C

2002-05-01

Information from the Human Genome Project (HGP) and the integration of information from related areas of study and technology will dramatically change health care for the craniofacial complex. Approaches to risk assessment and diagnosis, prevention, early intervention, and management of craniofacial conditions are and will continue to evolve through the application of this new knowledge. While this information will advance our health care abilities, it is clear that the dental profession will face challenges regarding the acquisition, application, transfer, and effective and efficient use of this knowledge with regards to dental research, dental education, and clinical practice. Unraveling the human genomic sequence now allows accurate diagnosis of numerous craniofacial conditions. However, the greatest oral disease burden results from dental caries and periodontal disease that are complex disorders having both hereditary and environmental factors determining disease risk, progression, and course. Disease risk assessment, prevention, and therapy, based on knowledge from the HGP, will likely vary markedly for the different complex conditions affecting the head and neck. Integration of Information from the human genome, comparative and microbial genomics, proteomics, bioinformatics, and related technologies will provide the basis for proactive prevention and intervention and novel and more efficient treatment approaches. Oral health care practitioners will increasingly require knowledge of human genetics and the application of new molecular-based diagnostic and therapeutic technologies.

Acoustic Noise Levels of Dental Equipments and Its Association with Fear and Annoyance Levels among Patients Attending Different Dental Clinic Setups in Jaipur, India

PubMed Central

Ganta, Shravani; Nagaraj, Anup; Pareek, Sonia; Atri, Mansi; Singh, Kushpal; Sidiq, Mohsin

2014-01-01

Background: Noise is a source of pervasive occupational hazard for practicing dentists and the patients. The sources of dental sounds by various dental equipments can pose as a potential hazard to hearing system and add to the annoyance levels of the patients. The aim of the study was to analyze the noise levels from various equipments and evaluate the effect of acoustic noise stimulus on dental fear and annoyance levels among patients attending different dental clinic setups in Jaipur, India. Methodology: The sampling frame comprised of 180 patients, which included 90 patients attending 10 different private clinics and 90 patients attending a Dental College in Jaipur. The levels of Acoustic Noise Stimulus originating from different equipments were determined using a precision sound level meter/decibulometer. Dental fear among patients was measured using Dental Fear Scale (DFS). Results: Statistical analysis was performed using chi square test and unpaired t-test. The mean background noise levels were found to be maximum in the pre-clinical setup/ laboratory areas (69.23+2.20). Females and the patients attending dental college setup encountered more fear on seeing the drill as compared to the patients attending private clinics (p<0.001). Conclusion: The sources of dental sounds can pose as a potential hazard to hearing system. It was analyzed that the environment in the clinics can directly have an effect on the fear and annoyance levels of patients. Hence it is necessary control the noise from various dental equipments to reduce the fear of patients from visiting a dental clinic. PMID:24959512

[Recent achievements in the microbiological etiology of dental caries].

PubMed

Jing, Chen; Lei, Cheng; Xuedong, Zhou; Xian, Peng

2018-02-01

Dental caries is the most common chronic infectious disease of the oral cavity. The bacterium Streptococcus mutans is the sole pathogen that causes this disease. However, substantial evidence suggests that prevention and treatment strategies developed from traditional "cariogenic pathogen theory" are inefficient in reducing the prevalence of dental caries. An increasing number of individuals adopt the ecological view of the microbiota in the pathogenesis of dental caries. Recent technological improvements have enabled the detection and analysis of oral microorganisms, and many studies have focused on this area. The core microbiota is defined as a cluster of microbes playing critical roles in the initial and development phases of dental caries and may provide future direction for microorganism-related etiological studies.

Dental education in a flat world: advocating for increased global collaboration and standardization.

PubMed

Donaldson, Martin E; Gadbury-Amyot, Cynthia C; Khajotia, Sharukh S; Nattestad, Anders; Norton, Neil S; Zubiaurre, Laureen A; Turner, Sharon P

2008-04-01

Globalization is a broad term referring to the increasing connectivity, integration, and interdependence of economies, societies, technologies, cultures, and political and ecological spheres across the world. This position paper was developed by a working group of the 2007 American Dental Education Association (ADEA) Leadership Institute. The authors explore the effect that globalization has had on dentistry and dental education to date and hypothesize what dental education could look like in the years ahead. While the paper is written from a North American perspective, some of the authors bring international expertise and experience to the topic of global dental education in a flat world. Specific issues and barriers addressed in this position paper include variations in accreditation and licensure requirements in dental education throughout the world; the historical development of dental education models (odontology and stomatology) and the need for congruency of these models in the global environment; the competency-based model of education and its relevance to development and implementation of global dental competencies; and the slow adoption of technological advances in dental education for promoting collaborations and encouraging resource sharing among countries. These challenges are discussed as they affect the implementation of a standardized global dental education that can lead to improved access to oral health care services and better oral and overall health for the citizens of the world.

Health Instruction Packages: Permanent Teeth, Dental Deposits, and Dental Instruments. Dientes Permanentes, Depositos Dentales y Instrumentos Dentales.

ERIC Educational Resources Information Center

Lind, Patricia; Germano, Catherine

These five learning modules use text interspersed with illustrations and reinforcement exercises to instruct dental aide and dental hygiene students about jaw bones and gums, dental deposits, and dental instruments. The first four modules were prepared by Patricia Lind in both Spanish and English. "The Gum and Bone of Permanent Teeth"…

SensInDenT-Noncontact Sensors Integrated Into Dental Treatment Units.

PubMed

Teichmann, Daniel; Teichmann, Maren; Weitz, Philippe; Wolfart, Stefan; Leonhardt, Steffen; Walter, Marian

2017-02-01

This paper presents the first system design (SensInDenT) for noncontact cardiorespiratory monitoring during dental treatment. The system is integrated into a dental treatment unit, and combines sensors based on electromagnetic, optical, and mechanical coupling at different sensor locations. The measurement principles and circuits are described and a system overview is presented. Furthermore, a first proof of concept is provided by taking measurements in healthy volunteers under laboratory conditions.

The influence of industry on dental education.

PubMed

Gillis, Martin R; McNally, Mary E

2010-10-01

Academic dental institutions face the growing challenge of securing the resources needed to develop a curriculum that incorporates current innovation and technology to ensure that students' learning experiences are relevant to current dental practice. As a result, university-industry relationships are becoming increasingly common in academe. While these relationships facilitate curriculum relevance, they also expose students to external market forces. The purpose of this study was to explore the influence of industry on dental education using a qualitative research study design. Analysis of semistructured interviews with thirteen Dalhousie University dental faculty members revealed two primary themes that suggest a tension between the traditional hierarchical organizational structures guiding curriculum (i.e., authoritarianism) and industry's quest for profit (i.e., entrepreneurialism). Additional themes demonstrate a belief that industry directly influences students' knowledge and understanding of evidence as well as their experience with both the formal and informal curricula. Industry's presence in academe is a concern. Dental educators, as stewards of the profession, must be nimble in brokering industry's presence without compromising the integrity of both the educational program and the teaching institution as a whole.

Computer-aided navigation in dental implantology: 7 years of clinical experience.

PubMed

Ewers, Rolf; Schicho, Kurt; Truppe, Michael; Seemann, Rudolf; Reichwein, Astrid; Figl, Michael; Wagner, Arne

2004-03-01

This long-term study gives a review over 7 years of research, development, and routine clinical application of computer-aided navigation technology in dental implantology. Benefits and disadvantages of up-to-date technologies are discussed. In the course of the current advancement, various hardware and software configurations are used. In the initial phase, universally applicable navigation software is adapted for implantology. Since 2001, a special software module for dental implantology is available. Preoperative planning is performed on the basis of prosthetic aspects and requirements. In clinical routine use, patient and drill positions are intraoperatively registered by means of optoelectronic tracking systems; during preclinical tests, electromagnetic trackers are also used. In 7 years (1995 to 2002), 55 patients with 327 dental implants were successfully positioned with computer-aided navigation technology. The mean number of implants per patient was 6 (minimum, 1; maximum, 11). No complications were observed; the preoperative planning could be exactly realized. The average expenditure of time for the preparation of a surgical intervention with navigation decreased from 2 to 3 days in the initial phase to one-half day in clinical routine use with software that is optimized for dental implantology. The use of computer-aided navigation technology can contribute to considerable quality improvement. Preoperative planning is exactly realized and intraoperative safety is increased, because damage to nerves or neighboring teeth can be avoided.

Dental education and special-needs patients: challenges and opportunities.

PubMed

McTigue, Dennis J

2007-01-01

Pediatric dentists have, by tradition and default, provided care for persons with special health care needs (PSHCN), regardless of age. Deinstitutionalization of PSHCN in the 1960s, however, overwhelmed the dental care system, and oral health care became one of the greatest unmet needs of this population. This presentation follows the history of training for dentists in this aspect of care, from the first demonstration programs in the 1970s to the current educational programs in U.S. dental schools. Today's dental students must be competent in assessing the treatment needs of PSHCN, but accreditation standards do not require competency in the treatment of this group of patients. Recommendations to rectify this include revising dental school curricula to be more patient-centered, improving technology in schools, earlier clinical experiences for dental students, and the use of community-based clinics.

The role of technology in the clinical laboratory of the future.

PubMed

Wilkinson, D S

1997-01-01

Advances in automation and informatics will drive the implementation of new technology as we enter the 21st century. Five technologies which will have the greatest impact on the practice of laboratory medicine during the next decade include molecular diagnostics, near patient testing, image analysis, robotics, and information management. The list of molecular pathology tests with potential clinical utility expands daily. Some, such as tests for human immune deficiency virus (HIV) and hepatitis C virus, already are available as commercial kits. Quality assessment and proficiency testing programs still are evolving. DNA tests in oncology, such as T- and B-cell gene rearrangements and t(9;22) translocation, have proven useful in detecting small numbers of tumor cells and have demonstrated clinical utility in some circumstances. Tests for monogenetic diseases, such as sickle cell disease, are useful in planning antenatal management of mothers at risk. Screening tests for the genetic predisposition for certain forms of colon and breast cancer and Alzheimer's Disease are now possible. This suggests the potential for large scale screening of populations at risk. Continued improvements in biosensor technology and miniaturization will increase the ability to test for many analytes at or near the patient. The generally increased cost per test must be reconciled with the potential to decrease the overall cost of care by improved turnaround time. Computerized image analysis will radically change, and in some cases eliminate, manual clinical microscopy in urinalysis, hematology, immunohistochemistry, and cytology. Robotics will greatly decrease personnel requirements for repetitive tasks, such as specimen transport, processing, and aliquoting. We will process many specimens from start to finish without human intervention. Image management systems will allow archiving of diagnostic gross and microscopic images along with the traditional text descriptions and diagnosis

Creating an Environment for Diversity in Dental Schools: One School's Approach.

ERIC Educational Resources Information Center

Formicola, Allan J.; Klyvert, Marlene; McIntosh, James; Thompson, Albert; Davis, Martin; Cangialosi, Thomas

2003-01-01

Describes how the Columbia University School of Dental and Oral Surgery strives to admit more underrepresented minority students. Discusses its D.D.S. minority admissions program, postdoctoral minority admissions program, Science and Technology Entry Program (STEP) for middle and high school students, and "zero" tuition dental assisting…

75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-11

.... FDA-2008-N-0163] (formerly Docket No. 2001N-0067) RIN 0910-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam... the Federal Register of August 4, 2009 (74 FR 38686) which classified dental amalgam as a class II...

Better informed in clinical practice - a brief overview of dental informatics.

PubMed

Reynolds, P A; Harper, J; Dunne, S

2008-03-22

Uptake of dental informatics has been hampered by technical and user issues. Innovative systems have been developed, but usability issues have affected many. Advances in technology and artificial intelligence are now producing clinically useful systems, although issues still remain with adapting computer interfaces to the dental practice working environment. A dental electronic health record has become a priority in many countries, including the UK. However, experience shows that any dental electronic health record (EHR) system cannot be subordinate to, or a subset of, a medical record. Such a future dental EHR is likely to incorporate integrated care pathways. Future best dental practice will increasingly depend on computer-based support tools, although disagreement remains about the effectiveness of current support tools. Over the longer term, future dental informatics tools will incorporate dynamic, online evidence-based medicine (EBM) tools, and promise more adaptive, patient-focused and efficient dental care with educational advantages in training.

Dental Amalgam

MedlinePlus

... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

Utilization of dental health care services in context of the HIV epidemic- a cross-sectional study of dental patients in the Sudan.

PubMed

Nasir, Elwalid Fadul; Astrøm, Anne Nordrehaug; David, Jamil; Ali, Raouf Wahab

2009-11-16

HIV infected patients should be expected in the Sudanese dental health care services with an increasing frequency. Dental care utilization in the context of the HIV epidemic is generally poorly understood. Focusing on Sudanese dental patients with reported unknown HIV status, this study assessed the extent to which Andersen's model in terms of predisposing (socio-demographics), enabling (knowledge, attitudes and perceived risk related to HIV) and need related factors (oral health status) predict dental care utilization. It was hypothesized that enabling factors would add to the explanation of dental care utilization beyond that of predisposing and need related factors. Dental patients were recruited from Khartoum Dental Teaching Hospital (KDTH) and University of Science and Technology (UST) during March-July 2008. A total of 1262 patients (mean age 30.7, 56.5% females and 61% from KDTH) were examined clinically (DMFT) and participated in an interview. A total of 53.9% confirmed having attended a dental clinic for treatment at least once in the past 2 years. Logistic regression analysis revealed that predisposing factors; travelling inside Sudan (OR = 0.5) were associated with lower odds and females were associated with higher odds (OR = 2.0) for dental service utilization. Enabling factors; higher knowledge of HIV transmission (OR = 0.6) and higher HIV related experience (OR = 0.7) were associated with lower odds, whereas positive attitudes towards infected people and high perceived risk of contagion (OR = 1.3) were associated with higher odds for dental care utilization. Among need related factors dental caries experience was strongly associated with dental care utilization (OR = 4.8). Disparity in the history of dental care utilization goes beyond socio-demographic position and need for dental care. Public awareness of HIV infection control and confidence on the competence of dentists should be improved to minimize avoidance behaviour and help establish dental

A Comparison of Dental Chartings Performed at the Joint POW/MIA Accounting Command Central Identification Laboratory and the Kokura Central Identification Unit on Remains Identified from the Korean War.

PubMed

Shiroma, Calvin Y

2016-01-01

During the Korean War, the Office of the Quartermaster General's Graves Registration Service (GRS) was responsible for the recovery, processing, identification, and repatriation of US remains. In January 1951, the GRS established a Central Identification Unit (CIU) at Kokura, Japan. At the Kokura CIU, postmortem dental examinations were performed by the dental technicians. Thirty-nine postmortem dental examinations performed at the CIU were compared to the findings documented in the Forensic Odontology Reports written at the JPAC Central Identification Laboratory (CIL). Differences were noted in 20 comparisons (51%). The majority of the discrepancies was considered negligible and would not alter the JPAC decision to disinter a set of unknown remains. Charting discrepancies that were considered significant included the occasional failure of the Kokura technicians to identify teeth with inter-proximal or esthetic restorations and the misidentification of a mechanically prepared tooth (i.e., tooth prepared for a restoration) as a carious surface. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Perceived Dentist and Dental Hygienist Task Distribution After Dental and Dental Hygiene Students' Team Intervention.

PubMed

Reinders, Jan J; Krijnen, Wim P; Stegenga, Boudewijn; van der Schans, Cees P

2017-04-01

Attitudes of dental students regarding the provision of treatment tend to be dentist-centered; however, facilitating mixed student group formation could change such perceptions. The aim of this study was to investigate the perceived scope of practice of dental and dental hygiene students and whether their perceptions of task distribution between dentists and dental hygienists would change following an educational intervention consisting of feedback, intergroup comparison, and competition between mixed-group teams. The study employed a pretest-posttest single group design. Third-year dental students and second-year dental hygiene students at a university in The Netherlands were randomly assigned to intraprofessional teams (four or five members) and received team-based performance feedback and comparison. The intervention was finalized with an award ceremony for the best intraprofessional team. Before and after the intervention, students completed a questionnaire measuring their perceived distribution of ten tasks between dentists and dental hygienists. A total of 38 dental students and 32 dental hygiene students participated in the intervention-all 70 of those eligible. Questionnaires were completed by a total 88.4% (n=61) of the participants: 34 dental (89.5%) and 27 dental hygiene students (84.4%). Dental and dental hygiene students had similar perceptions regarding teeth cleaning (prophylaxis) (p=0.372, p=0.404) and, after the intervention, preventive tasks (p=0.078). Following the intervention, dental students considered four out of ten tasks as less dentist-centered: radiograph for periodontal diagnosis (p=0.003), local anesthesia (p=0.037), teeth cleaning (p=0.037), and periodontal treatment (p=0.045). Dental hygiene students perceived one task as being less dentist-centered after the intervention: radiograph for cariologic diagnosis (p=0.041). This study found that these dental and dental hygiene students had different opinions regarding the scope of practice

New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

PubMed

Lee, M-Y; Chang, C-C; Ku, Y C

2008-01-01

Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

Restructuring an undergraduate dental curriculum to global standards--a case study in an Indian dental school.

PubMed

Kadagad, P; Tekian, A; Pinto, P X; Jirge, V L

2012-05-01

Globalisation has affected all aspects of life and dentistry is no exception. In the context of today's dentist being a global citizen, undergraduate training in dentistry is set to ensure converging standards so that international recognition of dental qualifications can move forward. The decision of the Dental Council of India to expand the undergraduate dental program to five years provides an opportunity to be part of the endeavor of the Global Dental Congress to achieve converging standards which was initially for the European Union, and now spreading out globally. Economic emergence in Indian subcontinent has resulted in growing oral health care needs both in quality and quantity. To address this issue, the graduating dentist needs to be trained following a competency based curricular model. Access to Internet facilitated the goal of achieving converging standards of dental schools to be feasible because of the instant communication and capacity to share information about training strategies via technology across the globe. Upgrading the undergraduate training to global standards by dental schools in India could be a wise and strategic move both for attracting students to study in India, as well as retaining the graduates after their training. The following is a case study of an Indian dental school set to restructure the undergraduate curriculum to global standards using the 8 steps of Kotter's transformational change. Change in curriculum and the subsequent accreditation of the school in global platform not only attracts prospective students but also results in producing competent dentists. Dental education provided by the institution can result in quality assurance, benchmarking the assessment system to achieve international recognition. This paper highlights the need and importance of facilitation of international convergence with long term aspirations for mutual recognition of international degrees. © 2011 John Wiley & Sons A/S.

Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, andmore » DOE is issuing this Finding of No Significant Impact (FONSI).« less

Bioactive and inert dental glass-ceramics.

PubMed

Montazerian, Maziar; Zanotto, Edgar Dutra

2017-02-01

The global market for dental materials is predicted to exceed 10 billion dollars by 2020. The main drivers for this growth are easing the workflow of dentists and increasing the comfort of patients. Therefore, remarkable research projects have been conducted and are currently underway to develop improved or new dental materials with enhanced properties or that can be processed using advanced technologies, such as CAD/CAM or 3D printing. Among these materials, zirconia, glass or polymer-infiltrated ceramics, and glass-ceramics (GCs) are of great importance. Dental glass-ceramics are highly attractive because they are easy to process and have outstanding esthetics, translucency, low thermal conductivity, high strength, chemical durability, biocompatibility, wear resistance, and hardness similar to that of natural teeth, and, in certain cases, these materials are bioactive. In this review article, we divide dental GCs into the following two groups: restorative and bioactive. Most restorative dental glass-ceramics (RDGCs) are inert and biocompatible and are used in the restoration and reconstruction of teeth. Bioactive dental glass-ceramics (BDGCs) display bone-bonding ability and stimulate positive biological reactions at the material/tissue interface. BDGCs are suggested for dentin hypersensitivity treatment, implant coating, bone regeneration and periodontal therapy. Throughout this paper, we elaborate on the history, processing, properties and applications of RDGCs and BDGCs. We also report on selected papers that address promising types of dental glass-ceramics. Finally, we include trends and guidance on relevant open issues and research possibilities. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 619-639, 2017. © 2016 Wiley Periodicals, Inc.

Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

PubMed

Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

2014-10-01

Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

[Development of the automatic dental X-ray film processor].

PubMed

Bai, J; Chen, H

1999-07-01

This paper introduces a multiple-point detecting technique of the density of dental X-ray films. With the infrared ray multiple-point detecting technique, a single-chip microcomputer control system is used to analyze the effectiveness of the film-developing in real time in order to achieve a good image. Based on the new technology, We designed the intelligent automatic dental X-ray film processing.

Weaker dental enamel explains dental decay.

PubMed

Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

2015-01-01

Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

Federal Laboratory Consortium Recognizes Unituxin Collaborators with Excellence in Technology Transfer Awards | Poster

Cancer.gov

The Federal Laboratory Consortium (FLC) presented an Excellence in Technology Transfer award to the group that collaborated to bring Unituxin (dinutuximab, also known as ch14.18), an immunotherapy for neuroblastoma, to licensure.

Students' Knowledge, Opinions, and Behaviors Concerning Dental Informatics and Computer Applications.

ERIC Educational Resources Information Center

Lang, W. Paul; And Others

1992-01-01

A survey of 95 first-year and 91 fourth-year dental students concerning informatics and computer applications in dentistry investigated knowledge of terms and concepts related to hardware, software, electronic communication, and dental applications; opinions concerning use of the technology; and extent of experience in 4 areas of use. (MSE)

Nanotechnology Approaches for Better Dental Implants

PubMed Central

Tomsia, Antoni P.; Launey, Maximilien E.; Lee, Janice S.; Mankani, Mahesh H.; Wegst, Ulrike G.K.; Saiz, Eduardo

2011-01-01

The combined requirements imposed by the enormous scale and overall complexity of designing new implants or complete organ regeneration are well beyond the reach of present technology in many dimensions, including nanoscale, as we do not yet have the basic knowledge required to achieve these goals. The need for a synthetic implant to address multiple physical and biological factors imposes tremendous constraints on the choice of suitable materials. There is a strong belief that nanoscale materials will produce a new generation of implant materials with high efficiency, low cost, and high volume. The nanoscale in materials processing is truly a new frontier. Metallic dental implants have been successfully used for decades but they have serious shortcomings related to their osseointegration and the fact that their mechanical properties do not match those of bone. This paper reviews recent advances in the fabrication of novel coatings and nanopatterning of dental implants. It also provides a general summary of the state of the art in dental implant science and describes possible advantages of nanotechnology for further improvements. The ultimate goal is to produce materials and therapies that will bring state-of-the-art technology to the bedside and improve quality of life and current standards of care. PMID:21464998

Electronic laboratory quality assurance program: A method of enhancing the prosthodontic curriculum and addressing accreditation standards.

PubMed

Moghadam, Marjan; Jahangiri, Leila

2015-08-01

An electronic quality assurance (eQA) program was developed to replace a paper-based system and to address standards introduced by the Commission on Dental Accreditation (CODA) and to improve educational outcomes. This eQA program provides feedback to predoctoral dental students on prosthodontic laboratory steps at New York University College of Dentistry. The purpose of this study was to compare the eQA program of performing laboratory quality assurance with the former paper-based format. Fourth-year predoctoral dental students (n=334) who experienced both the paper-based and the electronic version of the quality assurance program were surveyed about their experiences. Additionally, data extracted from the eQA program were analyzed to identify areas of weakness in the curriculum. The study findings revealed that 73.8% of the students preferred the eQA program to the paper-based version. The average number of treatments that did not pass quality assurance standards was 119.5 per month. This indicated a 6.34% laboratory failure rate. Further analysis of these data revealed that 62.1% of the errors were related to fixed prosthodontic treatment, 27.9% to partial removable dental prostheses, and 10% to complete removable dental prostheses in the first 18 months of program implementation. The eQA program was favored by dental students who have experienced both electronic and paper-based versions of the system. Error type analysis can yield the ability to create customized faculty standardization sessions and refine the didactic and clinical teaching of the predoctoral students. This program was also able to link patient care activity with the student's laboratory activities, thus addressing the latest requirements of the CODA regarding the competence of graduates in evaluating laboratory work related to their patient care. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Liquid Chromatography-Tandem Mass Spectrometry: An Emerging Technology in the Toxicology Laboratory.

PubMed

Zhang, Yan Victoria; Wei, Bin; Zhu, Yu; Zhang, Yanhua; Bluth, Martin H

2016-12-01

In the last decade, liquid chromatography-tandem mass spectrometry (LC-MS/MS) has seen enormous growth in routine toxicology laboratories. LC-MS/MS offers significant advantages over other traditional testing, such as immunoassay and gas chromatography-mass spectrometry methodologies. Major strengths of LC-MS/MS include improvement in specificity, flexibility, and sample throughput when compared with other technologies. Here, the basic principles of LC-MS/MS technology are reviewed, followed by advantages and disadvantages of this technology compared with other traditional techniques. In addition, toxicology applications of LC-MS/MS for simultaneous detection of large panels of analytes are presented. Copyright © 2016 Elsevier Inc. All rights reserved.

Establishing a standardized dental record-keeping system for a small investigational colony of rhesus monkeys (Macaca mulatta).

PubMed

Gibson, B W; McGuffey, L; Raflo, C P; Niemiec, B A

2008-02-01

Dental hygiene is becoming an increasingly important component of quality health care for laboratory animals, especially non-human primates (NHPs). One key to a successful health care program is an effective and efficient record-keeping system. To standardize a dental hygiene program for a small colony of NHPs, we developed a dental recording chart specific for rhesus monkeys. This dental chart was developed using the modified Triadan system. This system numbers teeth across species according to location. An illustrative case report was presented to demonstrate the accurate record keeping and spatial relationship generated from this Old World NHP dental chart design. The development and implementation of a standardized dental chart, as part of a dental hygiene program will help minimize variables that may affect research data.

Weaker Dental Enamel Explains Dental Decay

PubMed Central

Vieira, Alexandre R.; Gibson, Carolyn W.; Deeley, Kathleen; Xue, Hui; Li, Yong

2015-01-01

Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is “weaker” while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution. PMID:25885796

A Program Like Any Other…Like None Other: Sustaining a Laboratory Science Technology Program for Deaf and Hard-of-Hearing Students

ERIC Educational Resources Information Center

Pagano, Todd; Ross, Annemarie D.; O'Neill, George J.

2012-01-01

A goal of the Laboratory Science Technology program at the National Technical Institute for the Deaf, a college of Rochester Institute of Technology, is to produce graduates with strong foundations in applied science, hands-on laboratory applications, and "soft skills" necessary for competitive employment as laboratory technicians.…

Financial due diligence in purchasing a dental practice.

PubMed

Wiederman, Arthur S

2008-06-01

Purchasing a dental practice can be a minefield. The office you are looking at could be the most beautiful office with all of the newest technology. But if it is not profitable, it will be a nightmare. This article will help navigate what the dentist and his or her CPA should be looking at when reviewing the books and records, based on the author's experience of reviewing more than 400 dental practices on behalf of buyers.

Assessing the current state of dental informatics in saudi arabia: the new frontier.

PubMed

Al-Nasser, Lubna; Al-Ehaideb, Ali; Househ, Mowafa

2014-01-01

Dental informatics is an emerging field that has the potential to transform the dental profession. This study aims to summarize the current applications of dental informatics in Saudi Arabia and to identify the challenges facing expansion of dental informatics in the Saudi context. Search for published articles and specialized forum entries was conducted, as well as interviews with dental professionals familiar with the topic. Results indicated that digital radiography/analysis and administrative management of dental practice are the commonest applications used. Applications in Saudi dental education included: web-based learning systems, computer-based assessments and virtual technology for clinical skills' teaching. Patients' education software, electronic dental/oral health records and the potential of dental research output from electronic databases are yet to be achieved in Saudi Arabia. Challenges facing Saudi dental informatics include: lack of IT infrastructure/support, social acceptability and financial cost. Several initiatives are taken towards the research in dental informatics. Still, more investments are needed to fully achieve the potential of various application of informatics in dental education, practice and research.

Attitudes of medical laboratory technology graduates towards the internship training period at king faisal university.

PubMed

Bashawri, Layla A M; Ahmed, Mirghani A; Bahnassy, Ahmed A L; Al-Salim, Jawaher A

2006-05-01

The objective of this present survey was to look into the attitudes of medical laboratory technology (MLT) graduates towards the internship training period of the MLT Department, College of Applied Medical Sciences, King Faisal University. A self-administered questionnaire was designed and distributed for this purpose. The study period was from December 1(st) 2002 - 31(st) December 2004. Two-hundred questionnaires were distributed to recent graduates, and 115 were returned completed. All respondents agreed with the importance and necessity of the internship period, and felt it should not be reduced or eliminated. The most favorite laboratory where they liked to work was microbiology (70%). They all agreed that evaluation report with hospital staff and laboratory set up were vital in achieving the goals of the internship period. The majority stressed the significance of safety precautions and the application of theoretical knowledge before performing technical assignments. The respondents had very positive attitudes towards the internship-training period stressing its importance. The most favorite laboratory rotations were in rank order: Microbiology, Serology followed by Histotechnology, Hematology, Blood Banking and finally Clinical Chemistry. The majority of graduates had a very positive attitude also towards medical laboratory technology as a profession.

Development of a mobile device optimized cross platform-compatible oral pathology and radiology spaced repetition system for dental education.

PubMed

Al-Rawi, Wisam; Easterling, Lauren; Edwards, Paul C

2015-04-01

Combining active recall testing with spaced repetition increases memory retention. The aim of this study was to evaluate and compare students' perception and utilization of an electronic spaced repetition oral pathology-radiology system in dental hygiene education and predoctoral dental education. The study employed an open-source suite of applications to create electronic "flashcards" that can be individually adjusted for frequency of repetition, depending on a user's assessment of difficulty. Accessible across multiple platforms (iOS, Android, Linux, OSX, Windows) as well as via any web-based browser, this framework was used to develop an oral radiology-oral pathology database of case-based questions. This system was introduced in two courses: sophomore oral pathology for dental students and sophomore radiology for dental hygiene students. Students were provided free software and/or mobile tablet devices as well as a database of 300 electronic question cards. Study participants were surveyed on frequency and extent of use. Perception-based surveys were used to evaluate their attitudes towards this technology. Of the eligible students, 12 of 22 (54.5%) dental hygiene and 49 of 107 (45.8%) dental students responded to the surveys. Adoption rates and student feedback were compared between the two groups. Among the respondents, acceptance of this technology with respect to educational usefulness was similar for the dental and dental hygiene students (median=5 on a five-point scale; dental hygiene interquartile range (IQR)=0; dental IQR=1). Only a minority of the survey respondents (25% dental, 33% dental hygiene) took advantage of one of the main benefits of this technology: automated spaced repetition.

The Impact of Research on the Future of Dental Education: How Research and Innovation Shape Dental Education and the Dental Profession.

PubMed

Slavkin, Harold C

2017-09-01

Scientific inquiry and discovery are the fuel for education, research, technology, and health care in all the health professions: dentistry, medicine, nursing, pharmacy, and allied health sciences. The progression of discoveries from basic or fundamental to clinical research is followed by the progression from clinical to implementation and improved health outcomes and processes. Generally, implementation science is the scientific study of methods to promote the systematic uptake of research findings (e.g., basic, translational, behavioral, socioeconomic, and clinical) as well as other related evidence-based practices into standards of care, thereby improving the quality, effectiveness, and cost benefits of health care services. There is little doubt that science has and will continue to provide the essential fuel for innovations that lead to new and improved technologies for risk assessment, prevention, diagnosis, treatments and therapeutics, and implementation for addressing oral and craniofacial diseases and disorders. The history of the U.S. dental profession reviewed in this article gives testimony to the continued need for investments in scientific inquiry that accelerate progress in comprehensive health care for all people. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

The development and validation of a new technology, based upon 1.5% arginine, an insoluble calcium compound and fluoride, for everyday use in the prevention and treatment of dental caries.

PubMed

Cummins, D

2013-08-01

This paper briefly discusses caries prevalence, the multi-factorial nature of caries etiology, caries risk and the role and efficacy of fluoride. The paper also highlights research on bacterial metabolism which provided understanding of the mouth's natural defenses against caries and the basis for the development of a new technology for the everyday prevention and treatment of caries. Finally, evidence that the technology complements and enhances the anti-caries efficacy of fluoride toothpaste is summarized. Global data show that dental caries is a prevalent disease, despite the successful introduction of fluoride. Caries experience depends on the balance between consumption of sugars and oral hygiene and the use of fluoride. Three scientific concepts are fundamental to new measures to detect, treat and monitor caries: (1) dental caries is a dynamic process, (2) dental caries is a continuum of stages from reversible, pre-clinical to irreversible, clinically detectable lesions, and (3) the caries process is a balance of pathological and protective factors that can be modulated to manage caries. Fluoride functions as a protective factor by arresting and reversing the caries process, but fluoride does not prevent pathological factors that initiate the process. A novel technology, based upon arginine and an insoluble calcium compound, has been identified which targets dental plaque to prevent initiation of the caries process by reducing pathological factors. As the mechanisms of action of arginine and fluoride are highly complementary, a new dentifrice, which combines arginine with fluoride, has been developed and clinically proven to provide superior caries prevention. Copyright © 2013 Elsevier Ltd. All rights reserved.

Economic impact of dental hygienists on solo dental practices.

PubMed

Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J

2012-08-01

The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.

Prototyping of Dental Structures Using Laser Milling

NASA Astrophysics Data System (ADS)

Andreev, A. O.; Kosenko, M. S.; Petrovskiy, V. N.; Mironov, V. D.

2016-02-01

The results of experimental studies of the effect of an ytterbium fiber laser radiation parameters on processing efficiency and quality of ZrO2 ceramics widely used in stomatology are presented. Laser operating conditions with optimum characteristics for obtaining high quality final surfaces and rapid material removal of dental structures are determined. The ability of forming thin-walled ceramic structures by laser milling technology (a minimum wall thickness of 50 μm) is demonstrated. The examples of three-dimensional dental structures created in computer 3D-models of human teeth using laser milling are shown.

Microbial quality of water in dental unit waterlines.

PubMed

Nikaeen, Mahnaz; Hatamzadeh, Maryam; Sabzevari, Zohre; Zareh, Omolbanin

2009-09-01

Dental unit waterlines (DUWLs) are ideal environment for development of microbial biofilms. Microbial contamination of water in DUWLs is thought to be the result of biofilm formation as it could serves as a haven for pathogens. The aim of this study was to assess microbial quality of water in dental unit waterlines of dental units located at the dental school of Isfahan University of Medical Sciences. Water samples were collected from air/water syringe and high-speed handpiece. Generally, 100-200 ml water samples were collected aseptically in sterile containers with sodium thiosulfate at the beginning of the day after a 2 minute purge. Samples were transferred to the laboratory in insulated box with cooling packs and examined for total viable heterotrophic bacteria and fungi. The heterotrophic plate count levels were significantly exceeded the American Dental Association recommendations for DUWL water quality (< 200 CFU/ml), in both air/water syringe (84%, CFU/ml: 500-20000) and high-speed handpiece (96%, CFU/ml: 710-36800) samples. However, there was no significant difference between the level of contamination in the air/water syringe and high-speed handpiece. Fungi were found in 28% and 36% of air/water syringe and high-speed handpiece samples, respectively; and filamentous fungi were the most frequently isolated fungi. DUWLs should be subjected to routine microbial monitoring and to a decontamination protocol in order to minimize the risk of exposure to potential pathogens from dental units.

[Vital pulp therapy of damaged dental pulp].

PubMed

Xuedong, Zhou; Dingming, Huang; Jianguo, Liu; Zhengwei, Huang; Xin, Wei; Deqin, Yang; Jin, Zhao; Liming, Chen; Lin, Zhu; Yanhong, Li; Jiyao, Li

2017-08-01

The development of an expert consensus on vital pulp therapy can provide practical guidance for the improvement of pulp damage care in China. Dental pulp disease is a major type of illness that adversely affects human oral health. Pulp capping and pulpotomy are currently the main methods for vital pulp therapy. Along with the development of minimal invasion cosmetic dentistry, using different treatment technologies and materials reasonably, preserving healthy tooth tissue, and extending tooth save time have become urgent problems that call for immediate solution in dental clinics. This paper summarizes the experiences and knowledge of endodontic experts. We develop a clinical path of vital pulp therapy for clinical work by utilizing the nature, approach, and degree of pulp damage as references, defense and self-repairing ability of pulp as guidance, and modern technologies of diagnosis and treatment as means.

Broadening the Scope of Dental Education.

ERIC Educational Resources Information Center

Loe, Harald

1992-01-01

Scientific and technological advances affecting dental education in the near future are examined, including the growing role of saliva in diagnosis, direct imaging methods, biomaterials research, computer-aided design and manufacturing, molecular biology, and new restorative dentistry. It is argued that dentistry should be a fully recognized…

Stationary intraoral tomosynthesis for dental imaging

NASA Astrophysics Data System (ADS)

Inscoe, Christina R.; Wu, Gongting; Soulioti, Danai E.; Platin, Enrique; Mol, Andre; Gaalaas, Laurence R.; Anderson, Michael R.; Tucker, Andrew W.; Boyce, Sarah; Shan, Jing; Gonzales, Brian; Lu, Jianping; Zhou, Otto

2017-03-01

Despite recent advances in dental radiography, the diagnostic accuracies for some of the most common dental diseases have not improved significantly, and in some cases remain low. Intraoral x-ray is the most commonly used x-ray diagnostic tool in dental clinics. It however suffers from the typical limitations of a 2D imaging modality including structure overlap. Cone-beam computed tomography (CBCT) uses high radiation dose and suffers from image artifacts and relatively low resolution. The purpose of this study is to investigate the feasibility of developing a stationary intraoral tomosynthesis (s-IOT) using spatially distributed carbon nanotube (CNT) x-ray array technology, and to evaluate its diagnostic accuracy compared to conventional 2D intraoral x-ray. A bench-top s-IOT device was constructed using a linear CNT based X-ray source array and a digital intraoral detector. Image reconstruction was performed using an iterative reconstruction algorithm. Studies were performed to optimize the imaging configuration. For evaluation of s-IOT's diagnostic accuracy, images of a dental quality assurance phantom, and extracted human tooth specimens were acquired. Results show s-IOT increases the diagnostic sensitivity for caries compared to intraoral x-ray at a comparable dose level.

Biological approach of dental caries management.

PubMed

Grigalauskienė, Rūta; Slabšinskienė, Eglė; Vasiliauskienė, Ingrida

2015-01-01

Dental caries is a disease induced by dental plaque, which can be described as a community of microorganisms (biofilm). Because of genetic and environmental factors a number of changes in the oral microbiome takes place; in case of commensalism and mutualism between biofilm microorganisms and the host, homeostasis in oral microbiome is maintained. However, when a risk factor occurs parasitic relationship starts prevailing and activity of the pathogenic cariogenic microorganisms increases leading to a dental caries. According to the newest technologies of molecular microbiology new cariogenic microorganisms species have been determined. Each individual's oral microbiome is as unique as his/her immune system; therefore, commonly taken caries prevention measures cannot be of the same effectiveness for all individuals. Each person has his own caries risk which is determined by the oral microbiome and immune system influenced by the environmental and genetic factors. Early caries diagnostic, risk assessment and individualized caries prevention plan will allow us to control the disease and achieve a desirable effect. For the dentist the most important thing is not to treat the consequences of the disease - cavities - but be aware of the dental caries as a biological phenomenon.

Perceptions of a Mobile Technology on Learning Strategies in the Anatomy Laboratory

ERIC Educational Resources Information Center

Mayfield, Chandler H.; Ohara, Peter T.; O'Sullivan, Patricia S.

2013-01-01

Mobile technologies offer new opportunities to improve dissection learning. This study examined the effect of using an iPad-based multimedia dissection manual during anatomy laboratory instruction on learner's perception of anatomy dissection activities and use of time. Three experimental dissection tables used iPads and three tables served as a…

A Dental Prosthesis from the Early Modern Age in Tuscany (Italy).

PubMed

Minozzi, Simona; Panetta, Daniele; De Sanctis, Massimo; Giuffra, Valentina

2017-04-01

During archaeological excavation, carried out in the S. Francesco Monastery at Lucca (Tuscany, Italy), a golden dental appliance was discovered. The prosthesis was found, together with commingled human remains, in the collective tomb of the aristocratic family of the Guinigi, a powerful family who governed Lucca from 1392 until 1429. The exact archaeological dating of the prosthesis was not possible, but some elements suggest a dating to the beginning of the 17th century. Aim of the paper is to study and describe the dental appliance trough a multidisciplinary approach. Macroscopical and micro-CT examinations were performed to investigate the technics used for the realization of the dental prosthesis. SEM analysis was performed to study alloy composition of the metallic fixing lamina and microstructure of the deposits on the dental surface. The dental prosthesis consists in five mandibular teeth: three central incisors and two lateral canines linked together by a golden band inserted into the dental roots to replace the anterior arch of the jaw. Micro-CT scan revealed the presence of two small golden pins inserted into each tooth crossing the root and fixing the teeth to the internal gold band. SEM examination of the lamina indicated a homogeneous composition, with average contents of 73 wt% gold, 15.6 wt% Ag, and 11.4 wt% Cu. Apposition of dental calculus on the teeth indicated that the prosthesis had been worn for a long period. This dental prosthesis provides a unique finding of technologically advanced dentistry in this period. In fact, during the Early Modern Age, some authors described gold band technology for the replacement of missing teeth; nevertheless, no direct evidences of these devices have been brought to light up so far. © 2016 Wiley Periodicals, Inc.

Rural and remote dental services shortages: filling the gaps through geo-spatial analysis evidence-based targeting.

PubMed

Shiika, Yulia; Kruger, Estie; Tennant, Marc

Australia has a significant mal-distribution of its limited dental workforce. Outside the major capital cities, the distribution of accessible dental care is at best patchy. This study applied geo-spatial analysis technology to locate gaps in dental service accessibility for rural and remote dwelling Australians, in order to test the hypothesis that there are a few key location points in Australia where further dental services could make a significant contribution to ameliorating the immediate shortage crisis. A total of 2,086 dental practices were located in country areas, covering a combined catchment area of 1.84 million square kilometers, based on 50 km catchment zones around each clinic. Geo-spatial analysis technology was used to identify gaps in the accessibility of dental services for rural and remote dwelling Australians. An extraction of data was obtained to analyse the integrated geographically-aligned database. Results: Resolution of the lack of dental practices for 74 townships (of greater than 500 residents) across Australia could potentially address access for 104,000 people. An examination of the socio-economic mix found that the majority of the dental practices (84%) are located in areas classified as less disadvantaged. Output from the study provided a cohesive national map that has identified locations that could have health improvement via the targeting of dental services to that location. The study identified potential location sites for dental clinics, to address the current inequity in accessing dental services in rural and remote Australia.

Dental radiography in New Zealand: digital versus film.

PubMed

Ting, N A; Broadbent, J M; Duncan, W J

2013-09-01

Digital x-ray systems offer advantages over conventional film systems, yet many dentists have not adopted digital technology. To assess New Zealand dental practitioners' use of--and preferences for--dental radiography systems. Cross-sectional survey. General and specialist dental practice. Postal questionnaire survey of a sample of 770 dentists (520 randomly selected general dental practitioners and all 250 specialists) listed in the 2012 NZ Dental Council Register. Type of radiography systems used by dentists. Dentists' experiences and opinions of conventional film and digital radiography. The participation rate was 55.2%. Digital radiography systems were used by 58.0% of participating dentists, most commonly among those aged 31-40 years. Users of digital radiography tended to report greater satisfaction with their radiography systems than users conventional films. Two-thirds of film users were interested in switching to digital radiography in the near future. Reasons given by conventional film users for not using digital radiography included cost, difficulty in integrating with other software systems, concern about potential technical errors, and the size and nature of the intra-oral sensors. Many dental practitioners have still not adopted digital radiography, yet its users are more satisfied with their radiography systems than are conventional film users. The latter may find changing to a digital system to be satisfying and rewarding.

Dental, Dental Hygiene, and Advanced Dental Students' Use, Knowledge, and Beliefs Regarding Tobacco Products.

PubMed

Shearston, Jenni A; Shah, Krina; Cheng, Eric; Moosvi, Rizvan; Park, Su Hyun; Patel, Naiya; Spielman, Andrew I; Weitzman, Michael L

2017-11-01

Using cigarettes and alternative tobacco products (ATPs) is associated with negative oral health outcomes, and dental health professionals are poised to help patients quit. The aim of this study was to determine dental, dental hygiene, and advanced dental students' use, knowledge, and beliefs about cigarettes and ATPs, including perceptions about their education in tobacco dependence treatment and counseling experience. All 1,783 students enrolled in the dental, dental hygiene, and postdoctoral dental programs at the New York University College of Dentistry were invited to participate in the survey in 2016. A total of 708 students at least partially completed the survey, for a response rate of 39.7%. In the results, 146 of the students (20.1%) reported ever using cigarettes, while 253 (35.7%) reported ever using any ATP. Regarding tobacco use intervention, the students reported they had not received enough training on ATPs, were neutral about cigarettes, and were somewhat confident and not so confident counseling a cigarette smoker or ATP user, respectively. By their fourth year, 77.8% of the dental students reported they had counseled someone to stop smoking cigarettes, but only 40.7% had counseled someone to stop using ATPs. Overall, all groups of students reported feeling more confident and had received more education on interventions for cigarettes than for ATPs (p<0.001). These students reported low confidence in helping people quit tobacco and did not perceive they had received enough training on intervening with patients on use of cigarettes and ATPs. These findings call for a revised tobacco education curriculum for dental, dental hygiene, and advanced dental students, focused on building knowledge and confidence for promoting tobacco dependence treatment.

Impact of scientific and technological advances.

PubMed

Dragan, I F; Dalessandri, D; Johnson, L A; Tucker, A; Walmsley, A D

2018-03-01

Advancements in research and technology are transforming our world. The dental profession is changing too, in the light of scientific discoveries that are advancing biological technology-from new biomaterials to unravelling the genetic make-up of the human being. As health professionals, we embrace a model of continuous quality improvement and lifelong learning. Our pedagogical approach to incorporating the plethora of scientific-technological advancements calls for us to shift our paradigm from emphasis on skill acquisition to knowledge application. The 2017 ADEE/ADEA workshop provided a forum to explore and discuss strategies to ensure faculty, students and, ultimately, patients are best positioned to exploit the opportunities that arise from integrating new technological advances and research outcomes. Participants discussed methods of incorporating the impact of new technologies and research findings into the education of our dental students. This report serves as a signpost of the way forward and how to promote incorporation of research and technology advances and lifelong learning into the dental education curriculum. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

Unified Approach to the Biomechanics of Dental Implantology

NASA Technical Reports Server (NTRS)

Grenoble, D. E.; Knoell, A. C.

1973-01-01

The human need for safe and effective dental implants is well-recognized. Although many implant designs have been tested and are in use today, a large number have resulted in clinical failure. These failures appear to be due to biomechanical effects, as well as biocompatibility and surgical factors. A unified approach is proposed using multidisciplinary systems technology, for the study of the biomechanical interactions between dental implants and host tissues. The approach progresses from biomechanical modeling and analysis, supported by experimental investigations, through implant design development, clinical verification, and education of the dental practitioner. The result of the biomechanical modeling, analysis, and experimental phases would be the development of scientific design criteria for implants. Implant designs meeting these criteria would be generated, fabricated, and tested in animals. After design acceptance, these implants would be tested in humans, using efficient and safe surgical and restorative procedures. Finally, educational media and instructional courses would be developed for training dental practitioners in the use of the resulting implants.

How Research Training Will Shape the Future of Dental, Oral, and Craniofacial Research.

PubMed

D'Souza, Rena N; Colombo, John S

2017-09-01

This is a critical time in the history of the dental profession for it to fully embrace the responsibility to safeguard its reputation as a learned profession. In this golden era of scientific and technological advances, opportunities abound to create new diagnostics, preventions, treatments, and cures to improve oral health. Dental schools are the largest national resource entrusted with the responsibility to educate, train, and retain oral health researchers who can leverage such technologies and research opportunities that will benefit the profession at large as well as patients. This article reemphasizes the theme that research training and scholarship must be inextricably woven into the environment and culture in dental schools to ensure the future standing of the profession. An overview of the history of support provided by the National Institutes of Health and National Institute of Dental and Craniofacial Research for the training and career development of dentist-scientists is presented. In addition, new data on the outcomes of such investments are presented along with a comparison with other health professions. This overview underscores the need to expand the capacity of a well-trained cadre of oral health researchers through the reengineering of training programs. Such strategies will best prepare future graduates for team science, clinical trials, and translational research as well as other emerging opportunities. The urgent need for national organizations like the American Dental Association, American Dental Education Association, and American Association for Dental Research to create new alliances and novel initiatives to assist dental schools and universities in fulfilling their research mission is emphasized. To ignore such calls for action is to disavow a valuable legacy inherited by the dental profession. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Sandia National Laboratories: Research: Laboratory Directed Research &

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia National Laboratories: Missions:

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

NDE activities and technology transfer at Sandia National Laboratories

NASA Astrophysics Data System (ADS)

Shurtleff, W. W.

1993-11-01

The NDE, Photometrics, and Optical Data Reduction Department at Sandia National Laboratories in New Mexico provides nondestructive evaluation (NDE) support for all phases of research and development at Sandia. Present facilities and personnel provide radiography, acoustic monitoring, ultrasonic scanning, computed tomography, shearography/ESPI, infrared imaging, high speed and ultra-high speed photometrics, and image processing. Although the department includes photometrics and optical data reduction as well as NDE, I will refer to the NDE department from now on for simplicity. The NDE department has worked on technology transfer to organizations inside and outside the weapons complex. This work has been performed in all the Sandia business sectors: defense programs, energy and environment, and work for others. The technology transfer has been in the form of testing for product improvement such as validation of aircraft inspection equipment, consultation such as detecting lathe bearing slip for a major machine tool manufacturer, and products such as an acoustic sand detector for the oil and gas industry.

Dental radiology.

PubMed

Woodward, Tony M

2009-02-01

Dental radiology is the core diagnostic modality of veterinary dentistry. Dental radiographs assist in detecting hidden painful pathology, estimating the severity of dental conditions, assessing treatment options, providing intraoperative guidance, and also serve to monitor success of prior treatments. Unfortunately, most professional veterinary training programs provide little or no training in veterinary dentistry in general or dental radiology in particular. Although a technical learning curve does exist, the techniques required for producing diagnostic films are not difficult to master. Regular use of dental x-rays will increase the amount of pathology detected, leading to healthier patients and happier clients who notice a difference in how their pet feels. This article covers equipment and materials needed to produce diagnostic intraoral dental films. A simplified guide for positioning will be presented, including a positioning "cheat sheet" to be placed next to the dental x-ray machine in the operatory. Additionally, digital dental radiograph systems will be described and trends for their future discussed.

Dentistry and dental education in the context of the evolving health care system.

PubMed

Anderson, Maxwell H

2007-08-01

This article is intended to stimulate dialogue within the intertwined dental practice and dental education communities about our evolving health care system and dentistry's role within this system as it reconfigures in response to a complex interplay of influences. The changing dental disease burden in the United States is analyzed with consideration of how evolution in disease prevalence influences societal need for dental services and the resulting potential impact on the types of services provided and the education of future dental practitioners. The article concludes with discussion of a potential future scenario for practice and education in which one or both of the two health abnormalities (dental caries and periodontal diseases) most closely associated with dentistry as an area of medical specialization go away as a consequence of transformational technologies.

Mathematics for the Workplace. Applications from Medical Laboratory Technology. A Teacher's Guide.

ERIC Educational Resources Information Center

Wallace, Johnny M.; Jones, Dallas

This module presents a real-world context in which mathematics skills are used as part of a daily routine. The context is the medical laboratory technology field, and the module aims to help students develop the ability to use mathematics computations while performing tasks similar to those performed by a medical technologist. Materials in the…

Failure analysis of various monolithic posterior aesthetic dental crowns using finite element method

NASA Astrophysics Data System (ADS)

Porojan, Liliana; Topală, Florin

2017-08-01

The aim of the study was to assess the effect of material stiffness and load on the biomechanical performance of the monolithic full-coverage posterior aesthetic dental crowns using finite element analysis. Three restorative materials for monolithic dental crowns were selected for the study: zirconia; lithium disilicate glass-ceramic, and resin-based composite. Stresses were calculated in the crowns for all materials and in the teeth structures, under different load values. The experiments show that dental crowns made from all this new aesthetic materials processed by CAD/CAM technologies would be indicated as monolithic dental crowns for posterior areas.

Radiographic trends of dental offices and dental schools.

PubMed

Suleiman, O H; Spelic, D C; Conway, B; Hart, J C; Boyce, P R; Antonsen, R G

1999-07-01

A survey of private practice facilities in the United States that perform dental radiography was conducted in 1993 and repeated in dental schools in 1995-1996. Both surveys were conducted as part of the Nationwide Evaluation of X-ray Trends, or NEXT, survey program. A representative sample of dental facilities from each participating state were surveyed, and data on patient radiation exposure, radiographic technique, film-image quality, film-processing quality and darkroom fog were collected. The authors found that dental schools use E-speed film more frequently than do private practice facilities. The use of E-speed film and better film processing by dental schools resulted in lower patient radiation exposures without sacrificing image quality. The authors also found that dental school darkrooms had lower ambient fog levels than did those of private practice facilities. The distribution for the 1993 NEXT survey facilities was greater than that observed for dental schools for radiation exposure, film-processing quality and darkroom fog. Dental schools, in general, had better film quality and lower radiation exposures than did private practice facilities. Facilities need to emphasize better quality processing and the use of E-speed film to reduce patient exposure and improve image quality.

Does dental caries affect dental development in children and adolescents?

PubMed Central

Dhamo, Brunilda; Elezi, Besiana; Kragt, Lea; Wolvius, Eppo B; Ongkosuwito, Edwin M

2018-01-01

Although a link between dietary changes, caries, and dental development has been observed, the literature provides little insight about this relationship. The aim of our study was to investigate the association between dental caries and dental development in a clinical sample of Albanian children and adolescents. In total, 118 children and adolescents, born between 1995 and 2004 and aged 6–15 years, were included. Dental caries in the deciduous dentition was assessed using the Decayed, Filled Teeth (dft) index and dental caries in the permanent dentition was assessed using the Decayed, Missing, Filled Teeth (DMFT) index. Dental development during the permanent dentition was determined using the Demirjian method. Linear and ordinal regression models were applied to analyze the associations of dental caries with dental age and developmental stages of each left mandibular tooth. Dental caries in the deciduous dentition, estimated as a median dft of 2.0 (90% range, 0.0–9.1), was significantly associated with lower dental age (β = -0.21; 90% CI: -0.29, -0.12) and with delayed development of the canine, both premolars, and the second molar. Untreated dental caries (dt) was associated with lower dental age (β = -0.19; 90% CI: -0.28, -0.10). Dental caries in the permanent dentition, estimated as a median DMFT of 1.0 (90% range, 0.0–8.0), was not significantly associated with dental age (β = 0.05; 90% CI: -0.04, 0.14). However, the DMFT was associated with the advanced stages of development of both premolars and the second molar. The untreated dental caries in the deciduous dentition delays the development of permanent teeth. PMID:29659350

Plasma ion implantation technology at Hughes Research Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matossian, J.N.

1994-03-01

The plasma ion implantation (PII) project at Hughes Research Laboratories (HRL) has as its main objective the evaluation and application of PII technology to improve the tribological properties of metal and nonmetal materials used in aerospace, defense, and commercial applications. The HRL PII facility consists of a 4-ft-diam[times]8-ft-long vacuum chamber capable of implanting objects weighing up to 7000 lbs, and a high-power (100-kW), high-voltage (100-kV) pulse modulator to provide voltage pulses for implantation. Advanced plasma sources have been developed to produce atomic, as well as molecular, nitrogen and oxygen ions, and PII processes have been developed to treat metal andmore » nonmetal materials. The HRL PII facility has been operational since 1989 and has been used for prototype demonstrations of PII technology to achieve (1) a 2--3[times] improved wear life of Co/WC drill bits used for printed-wiring-board fabrication, (2) an 8[times] reduced wear rate for TiN-coated cutting tools, and (3) a 2[times] increased surface hardness for a 7000-lb polymer object, 3 ft by 5 ft by 1 ft.« less

A comparison of dental hygienists' salaries to state dental supervision levels.

PubMed

Catlett, April

2014-12-01

The purpose of this study is to evaluate the effect of dental supervision on registered dental hygienists' salaries in the 50 states and District of Columbia by comparing the average dental hygiene salaries from the largest metropolitan city within each state from May 2011, the most recent valid data, in relation to the required level of dental supervision. A retrospective contrasted-group quasi-experimental design analysis was conducted using the most current mean dental hygiene salaries for the largest metropolitan city within each state and the District of Columbia which was matched to the appropriate dental supervision level. In addition, a dental assisting salary control group was utilized and correlated to the appropriate dental hygienist salary in the same metropolitan city and state. Samples were obtained from the U.S. Department of Labor. A multivariate analysis of variance (MANOVA) statistical analysis was utilized to assess the relationship of the 5 levels of dentist supervision, with the registered dental hygienist salaries. The MANOVA analysis was also utilized to assess the control group, dental assistant salaries. No statistically significant results were found among the dental supervision levels on the measures of dental hygiene salaries and dental assistant salaries. Wilks's Λ=0.81, F (8, 90)=1.29, p=0.26. Analyses of variances (ANOVA) on the dependent variables were also conducted as follow-up tests to the MANOVA. Study results suggest dental hygienists who are required to have a dentist on the premises to complete any dental treatment obtain similar salaries to those dental hygienists who are allowed to work in some settings unsupervised by a dentist. Therefore, dental supervision does not seem to have an impact on dental hygienists' salaries. Copyright © 2014 The American Dental Hygienists’ Association.

Assessment of Application Technology of Natural User Interfaces in the Creation of a Virtual Chemical Laboratory

ERIC Educational Resources Information Center

Jagodzinski, Piotr; Wolski, Robert

2015-01-01

Natural User Interfaces (NUI) are now widely used in electronic devices such as smartphones, tablets and gaming consoles. We have tried to apply this technology in the teaching of chemistry in middle school and high school. A virtual chemical laboratory was developed in which students can simulate the performance of laboratory activities similar…

Dental Implantology in U.S. Dental Schools.

ERIC Educational Resources Information Center

Bavitz, J. Bruce

1990-01-01

The results of a survey of 44 dental schools corroborate the belief that dental implantology is gaining widespread acceptance in U.S. dental schools. Currently, predoctoral students have limited clinical participation. Most programs have taken the position that clinical techniques are best taught within the existing specialties at a graduate…

Ceramic dental biomaterials and CAD/CAM technology: state of the art.

PubMed

Li, Raymond Wai Kim; Chow, Tak Wah; Matinlinna, Jukka Pekka

2014-10-01

Ceramics are widely used as indirect restorative materials in dentistry because of their high biocompatibility and pleasing aesthetics. The objective is to review the state of the arts of CAD/CAM all-ceramic biomaterials. CAD/CAM all-ceramic biomaterials are highlighted and a subsequent literature search was conducted for the relevant subjects using PubMed followed by manual search. Developments in CAD/CAM technology have catalyzed researches in all-ceramic biomaterials and their applications. Feldspathic glass ceramic and glass infiltrated ceramic can be fabricated by traditional laboratory methods or CAD/CAM. The advent of polycrystalline ceramics is a direct result of CAD/CAM technology without which the fabrication would not have been possible. The clinical uses of these ceramics have met with variable clinical success. Multiple options are now available to the clinicians for the fabrication of aesthetic all ceramic restorations. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Patient and tissue identification in the assisted reproductive technology laboratory.

PubMed

Pomeroy, Kimball O; Racowsky, Catherine

2012-06-01

Several high-profile cases involving in vitro fertilization have recently received considerable media attention and highlight the importance of assuring patient and tissue identification. Within the assisted reproductive technology (ART) laboratory, there are many steps where wrong patient or tissue identity could have drastic results. Erroneous identity can result in tragic consequences for the patient, the laboratory, and for those working in the program as a whole. Such errors can result in enormous psychological and financial costs, as well as a loss in confidence. There are several critical steps that should be taken every single time and for each specific procedure performed in the ART laboratory to ensure the correct identification of patients and their tissue. These steps should be detailed in protocols that include the method of identification, the two unique identifiers that will be used, the sources of these identifiers, and often a system in which more than one person is involved in the identification. Each protocol should ideally include a checklist that is actively used for the implementation of each procedure. The protocol should also indicate what to do if the identification does not match up, including rapid handling and notification of the patient involved in the error. All ART laboratories should instill in their employees an atmosphere of full and open disclosure for cases where mistakes are made. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Dental ceramics: a review of new materials and processing methods.

PubMed

Silva, Lucas Hian da; Lima, Erick de; Miranda, Ranulfo Benedito de Paula; Favero, Stéphanie Soares; Lohbauer, Ulrich; Cesar, Paulo Francisco

2017-08-28

The evolution of computerized systems for the production of dental restorations associated to the development of novel microstructures for ceramic materials has caused an important change in the clinical workflow for dentists and technicians, as well as in the treatment options offered to patients. New microstructures have also been developed by the industry in order to offer ceramic and composite materials with optimized properties, i.e., good mechanical properties, appropriate wear behavior and acceptable aesthetic characteristics. The objective of this literature review is to discuss the main advantages and disadvantages of the new ceramic systems and processing methods. The manuscript is divided in five parts: I) monolithic zirconia restorations; II) multilayered dental prostheses; III) new glass-ceramics; IV) polymer infiltrated ceramics; and V) novel processing technologies. Dental ceramics and processing technologies have evolved significantly in the past ten years, with most of the evolution being related to new microstructures and CAD-CAM methods. In addition, a trend towards the use of monolithic restorations has changed the way clinicians produce all-ceramic dental prostheses, since the more aesthetic multilayered restorations unfortunately are more prone to chipping or delamination. Composite materials processed via CAD-CAM have become an interesting option, as they have intermediate properties between ceramics and polymers and are more easily milled and polished.

Application of failure mode and effect analysis in an assisted reproduction technology laboratory.

PubMed

Intra, Giulia; Alteri, Alessandra; Corti, Laura; Rabellotti, Elisa; Papaleo, Enrico; Restelli, Liliana; Biondo, Stefania; Garancini, Maria Paola; Candiani, Massimo; Viganò, Paola

2016-08-01

Assisted reproduction technology laboratories have a very high degree of complexity. Mismatches of gametes or embryos can occur, with catastrophic consequences for patients. To minimize the risk of error, a multi-institutional working group applied failure mode and effects analysis (FMEA) to each critical activity/step as a method of risk assessment. This analysis led to the identification of the potential failure modes, together with their causes and effects, using the risk priority number (RPN) scoring system. In total, 11 individual steps and 68 different potential failure modes were identified. The highest ranked failure modes, with an RPN score of 25, encompassed 17 failures and pertained to "patient mismatch" and "biological sample mismatch". The maximum reduction in risk, with RPN reduced from 25 to 5, was mostly related to the introduction of witnessing. The critical failure modes in sample processing were improved by 50% in the RPN by focusing on staff training. Three indicators of FMEA success, based on technical skill, competence and traceability, have been evaluated after FMEA implementation. Witnessing by a second human operator should be introduced in the laboratory to avoid sample mix-ups. These findings confirm that FMEA can effectively reduce errors in assisted reproduction technology laboratories. Copyright © 2016 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

[Publications related to dental materials in all the volumes of the journal Fogorvosi Szemle].

PubMed

Kóbor, András

2009-06-01

Among all the publications of the hundred-years-old Fogorvosi Szemle, there are only a few that deal with dental materials relative to other areas of dentistry. However, even this small number of articles reveals the change and advancement of dental materials and technologies.

Technological change and the medical technologist: a stress survey of four biomedical laboratories in a large tertiary care hospital.

PubMed

Yassi, A; Miller, B

1990-01-01

Medical technologists from four clinical laboratories in a large teaching hospital were surveyed for their perceptions of occupational stress or job dissatisfaction concomitant with the advent of major technological and procedural change. Overall the data support the interpretation of excessive stress and job dissatisfaction. More than one-third (37.7%) of the laboratory personnel experienced psychological symptoms of occupational stress; 46.4% had experienced physical symptoms of stress. There was a marked and significant increase in reports of adverse effects among the group of laboratory workers subjected to the most extensive technological changes. Main components of the stress difference related to work overload, feelings of uncertainty in the face of new technology, lack of direction from supervisors and lack of influence on management. Age, type of shift worked and years of employment were associated with physical and psychological manifestations of stress. Implications and recommendations for laboratory workers, hospital administrators and educators are discussed.

Dental therapists in general dental practices: an economic evaluation.

PubMed

Beazoglou, Tryfon J; Lazar, Vickie F; Guay, Albert H; Heffley, Dennis R; Bailit, Howard L

2012-08-01

Dental access disparities are well documented and have been recognized as a national problem. Their major cause is the lack of reasonable Medicaid reimbursement rates for the underserved. Specifically, Medicaid reimbursement rates for children average 40 percent below market rates. In addition, most state Medicaid programs do not cover adults. To address these issues, advocates of better oral health for the underserved are considering support for a new allied provider--a dental therapist--capable of providing services at a lower cost per service and in low-income and rural areas. Using a standard economic analysis, this study estimated the potential cost, price, utilization, and dentist's income effects of dental therapists employed in general dental practices. The analysis is based on national general dental practice data and the broadest scope of responsibility for dental therapists that their advocates have advanced, including the ability to provide restorations and extractions to adults and children, training for three years, and minimum supervision. Assuming dental therapists provide restorative, extraction, and pulpal services to patients of all ages and dental hygienists continue to deliver all hygiene services, the mean reduction in a general practice costs ranges between 1.57 and 2.36 percent. For dental therapists treating children only, the range is 0.31 to 0.47 percent. The effects on price and utilization are even smaller. In addition, the effects on most dentists' gross income, hours of work, and net income are negative. The estimated economic impact of dental therapists in the United States on private dental practice is very limited; therefore, the demand for dental therapists by private practices also would probably be very limited.

Description and Documentation of the Dental School Dental Delivery System.

ERIC Educational Resources Information Center

Chase, Rosen and Wallace, Inc., Alexandria, VA.

A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…

Resin-composite blocks for dental CAD/CAM applications.

PubMed

Ruse, N D; Sadoun, M J

2014-12-01

Advances in digital impression technology and manufacturing processes have led to a dramatic paradigm shift in dentistry and to the widespread use of computer-aided design/computer-aided manufacturing (CAD/CAM) in the fabrication of indirect dental restorations. Research and development in materials suitable for CAD/CAM applications are currently the most active field in dental materials. Two classes of materials are used in the production of CAD/CAM restorations: glass-ceramics/ceramics and resin composites. While glass-ceramics/ceramics have overall superior mechanical and esthetic properties, resin-composite materials may offer significant advantages related to their machinability and intra-oral reparability. This review summarizes recent developments in resin-composite materials for CAD/CAM applications, focusing on both commercial and experimental materials. © International & American Associations for Dental Research.

The effects of oscillating forces upon the flow of dental cements.

PubMed

Judge, R B; Wilson, P R

1999-11-01

The aim of this study was to evaluate the effect of oscillating forces upon the flow of five dental cements. A laboratory investigation was carried out using a crown and die. It showed that the application of oscillating forces improved the flow of the tested dental cements when combined with low static loads and wide crown-die separations. The oscillating forces enhanced the late, particle-dominated phase of cement flow. Further investigations characterised the nature of the oscillating forces applied in this experiment and revealed yield stress behaviour shown by one cement.

[Designing dental manpower index to evaluate dental manpower resources].

PubMed

Li, Gang; Ni, Zong-zan

2004-06-01

The purpose of this investigation is to find out a method to evaluate dental manpower resources. We selected population, GDP, number of dentist and number of different oral health professionals from certain internet stations, published books and journals from 1996 to 2000 as our investigating data. Data was collected from 100 countries. Our investigation found that the design of dental manpower index to evaluate dental manpower resources was effective and convenient. Dental manpower index is a good method to evaluate dental manpower resources.

Educational-research laboratory "electric circuits" on the base of digital technologies

NASA Astrophysics Data System (ADS)

Koroteyev, V. I.; Florentsev, V. V.; Florentseva, N. I.

2017-01-01

The problem of research activity of trainees' activation in the educational-research laboratory "Electric Circuits" using innovative methodological solutions and digital technologies is considered. The main task is in creation of the unified experimental research information-educational environment "Electrical Engineering". The problems arising during the developing and application of the modern software and hardware, experimental and research stands and digital control and measuring systems are presented. This paper presents the main stages of development and creation of educational-research laboratory "Electrical Circuits" at the Department of Electrical Engineering of NRNU MEPhI. The authors also consider the analogues of the described research complex offered by various educational institutions and companies. The analysis of their strengths and weaknesses, on which the advantages of the proposed solution are based, is held.

Dental, Dental Hygiene, and Graduate Students' and Faculty Perspectives on Dental Hygienists' Professional Role and the Potential Contribution of a Peer Teaching Program.

PubMed

McComas, Martha J; Inglehart, Marita R

2016-09-01

The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (p<0.001). Dental students also had the least positive attitudes about clinical interactions between dental hygiene and dental students (p<0.001) and perceived the fewest benefits of dental hygiene student peer teaching (p<0.001) before experiencing peer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about

Burnout among the clinical dental students in the jordanian universities.

PubMed

Amin, Wala Majid; Al-Ali, Muna H; Duaibis, Ramzi B; Oweis, Tamara; Badran, Darwish H

2009-10-01

The study aimed to evaluate the level of burnout among the clinical dental students in two Jordanian universities. A total of 307 students from the two schools were surveyed using Maslach Burnout Inventory survey. Scores for the inventory's subscales were calculated and the mean values for the students' groups were computed separately. Kruskal-Wallis and Mann-Whitney tests were carried out and the results were compared at 95% confidence level. The results showed that the dental students in both Jordanian universities suffered high levels of emotional exhaustion and depersonalization compared to reported levels for dental students in other countries. The dental students of the University of Jordan demonstrated a significantly higher (p < 0.05) level of emotional exhaustion than their counterparts in the Jordan University of Science and Technology. The findings indicated that dental students in the Jordanian universities presented considerable degrees of burnout manifested by high levels of emotional exhaustion and depersonalization. Studies targeting students health and psychology should be carried out to determine the causes of burnout among dental students. The curricula of the dental schools in the two universities should be accordingly improved to minimize burnout among the students. Burnout; Emotional exhaustion; Depersonalization; Personal accomplishment; Maslach Burnout Inventory.

Burnout Among the Clinical Dental Students in the Jordanian Universities

PubMed Central

Amin, Wala Majid; Al-Ali, Muna H.; Duaibis, Ramzi B.; Oweis, Tamara; Badran, Darwish H.

2009-01-01

Background The study aimed to evaluate the level of burnout among the clinical dental students in two Jordanian universities. Methods A total of 307 students from the two schools were surveyed using Maslach Burnout Inventory survey. Scores for the inventory’s subscales were calculated and the mean values for the students’ groups were computed separately. Kruskal-Wallis and Mann-Whitney tests were carried out and the results were compared at 95% confidence level. Results The results showed that the dental students in both Jordanian universities suffered high levels of emotional exhaustion and depersonalization compared to reported levels for dental students in other countries. The dental students of the University of Jordan demonstrated a significantly higher (p < 0.05) level of emotional exhaustion than their counterparts in the Jordan University of Science and Technology. Conclusions The findings indicated that dental students in the Jordanian universities presented considerable degrees of burnout manifested by high levels of emotional exhaustion and depersonalization. Studies targeting students health and psychology should be carried out to determine the causes of burnout among dental students. The curricula of the dental schools in the two universities should be accordingly improved to minimize burnout among the students. Keywords Burnout; Emotional exhaustion; Depersonalization; Personal accomplishment; Maslach Burnout Inventory PMID:22461870

Abstract - Cooperative Research and Development Agreement between Ames National Laboratory and National Energy Technology Laboratory AGMT-0609

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryden, Mark; Tucker, David A.

The goal of this project is to develop a merged environment for simulation and analysis (MESA) at the National Energy Technology Laboratory’s (NETL) Hybrid Performance (Hyper) project laboratory. The MESA sensor lab developed as a component of this research will provide a development platform for investigating: 1) advanced control strategies, 2) testing and development of sensor hardware, 3) various modeling in-the-loop algorithms and 4) other advanced computational algorithms for improved plant performance using sensors, real-time models, and complex systems tools.

Use of social media by dental educators.

PubMed

Arnett, M R; Loewen, J M; Romito, L M

2013-11-01

Social networking applications have become an established means of communication; applications that did not exist ten years ago are now used daily. Social media can be used for a myriad of reasons including instructional tools to supplement learning. This project was designed to assess the usage of social media applications by dental school faculty members and identify the types of accounts they prefer. Four hundred forty-three full-time dental and dental hygiene faculty members from five U.S. dental schools were invited to complete a twelve-item online survey regarding their social media usage. The response rate was 50 percent (n=221). Of the respondents, nearly half were dentists, and 62 percent were ≥51 years of age. Facebook was the most popular social network, reportedly used by 111 respondents. The most often reported frequency of use was weekly (20.4 percent, n=221); users indicated utilizing a network primarily for personal rather than professional purposes. However, 37 percent of the respondents reported not using any social media. The most frequently cited barriers to the use of social media were time (48 percent) and privacy concerns (48 percent). Although few would dispute the influence social media has on today's students, the suitability and appropriateness of social media technology and its integration into dental curricula require further evaluation.

Digital imaging for dental caries.

PubMed

Wenzel, A

2000-04-01

Laboratory studies show that digital intraoral radiography systems are as accurate as dental film for the detection of caries when a good-quality image is obtained, although more re-takes might be necessary because of positioning errors with the digital systems, particularly the charge-coupled device sensors. The phosphor plate is more comfortable for the patient than nondigital systems, and the dose can be further reduced with the storage phosphors. Cross-contamination does not pose a problem with digital systems if simple hygiene procedures are observed.

[Training and use of dental manpower resources in Mexico].

PubMed

Hermosillo, G G; López Cámara, V; Alvarez Manilla, J M; García Cantú, M; Silva Olivares, H

1978-01-01

The introductory section describes the general situation of dental care in Mexico, analyzes the prevailing service model (including the kind of work done by the dental professional and the technology he employs), and briefly reviews the evolution of dentistry in the country. There follows an account of a series of new approaches to service and manpower training in experimental implementation since 1972 in the stomatology curriculum at the Xochimilco campus of the Metropolitan Autonomous University, at the National School of Professional Studies at Zaragoza, in the School of Dentistry of Nuevo León Autonomous University, Monterrey, and in the Dental Services at Ciudad Netzahualcóyotl. In each case, the background, characteristics, and objectives of the programs, and their evolution and prospects are described.

Breakthrough Technologies Developed by the Air Force Research Laboratory and Its Predecessors

DTIC Science & Technology

2005-12-21

quickly plan its most economical fabrication within the constraints of schedule, availability of raw materials, and variability of materials and...intensive—more efficient and economical . ManTech introduced automation and inspection technologies, including the use of scanning electron...the novel use of asphalt mixed with ammonium nitrate as a solid propellant, a mixture first devised at the Jet Propulsion Laboratory. That line of

Sandia National Laboratories: Sandia National Laboratories: News: Events

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Importance of the concept of inner organs-dental relations in dentistry.

PubMed

Abasova, I; Rustamova, P; Seidbekov, O

2009-12-01

The current article is presenting an effective treatment scheme, providing reliable positive result of therapy and prophylaxis of dental diseases and its complications on the patients through the study of pathology of meridian - inner organs - dental system, bound by system of traces - meridians, using Doppler ultrasonography, rheovasography, photoplethysmography, Electroacupuncture, ultrasound investigations of the inner organs, X-Ray, laboratory investigations, electrocardiography methods. We had studied the efficiency of the odontic Microsystem, developed by R. Voll and R. Dale in dental practice by oral examination of 100 patients, average aged 25,5+/-0,74, which were divided into three groups. The necessity of complex treatment of the patients with pathology of inner organs and related with that demineralization process of the hard tissues of the teeth and the periodontitis had been demonstrated.

Dental fear and satisfaction with dental services in Switzerland.

PubMed

Armfield, Jason M; Enkling, Norbert; Wolf, Christian A; Ramseier, Christoph A

2014-01-01

Dental satisfaction is associated with continuity of dental care, compliance with dentist advice, and positive health outcomes. It is expected that people with higher dental fear might have less dental satisfaction because of more negative dental experiences. The objective of this study was to examine satisfaction and reasons for satisfaction with dental practitioners in Switzerland and variations by dental fear. A national sample of 1,129 Swiss residents aged 15-74 (mean = 43.2 years) completed a personal interview at their home with questions assessing dental fear, dental service use, general satisfaction with their dentist, and reasons for satisfaction or dissatisfaction. Overall, 47.9 percent of participants responded that they were satisfied with their dentist and 47.6 percent that they were very satisfied. Satisfaction differed significantly by gender, language spoken, region of residence, and educational attainment. Greater dental fear was significantly associated with greater dissatisfaction with the dentist. The percentage of people who were very satisfied with the dentist ranged from 56.0 percent among people with no fear to 30.5 percent for participants with "quite a lot" of fear but was higher (44.4 percent) for people who stated that they were "very much" afraid of the dentist. The most common reasons attributed for satisfaction with dentists were interpersonal characteristics of the dentist and staff. People with "quite a lot" of fear were found to endorse these sentiments least. Although higher dental fear was associated with more dissatisfaction with the dentist, the level of satisfaction among fearful individuals in Switzerland is still high. © 2012 American Association of Public Health Dentistry.

Dental Workforce Availability and Dental Services Utilization in Appalachia: A Geospatial Analysis

PubMed Central

Feng, Xue; Sambamoorthi, Usha; Wiener, R. Constance

2016-01-01

Objectives There is considerable variation in dental services utilization across Appalachian counties, and a plausible explanation is that individuals in some geographical areas do not utilize dental care due to dental workforce shortage. We conducted an ecological study on dental workforce availability and dental services utilization in Appalachia. Methods We derived county-level (n = 364) data on demographic, socio-economic characteristics and dental services utilization in Appalachia from the 2010 Behavioral Risk Factor Surveillance System (BRFSS) using person-level data. We obtained county-level dental workforce availability and physician-to-population ratio estimates from Area Health Resource File, and linked them to the county-level BRFSS data. The dependent variable was the proportion using dental services within the last year in each county (ranging from 16.6% to 91.0%). We described the association between dental workforce availability and dental services utilization using ordinary least squares regression and spatial regression techniques. Spatial analyses consisted of bivariate Local Indicators of Spatial Association (LISA) and geographically weighted regression (GWR). Results Bivariate LISA showed that counties in the central and southern Appalachian regions had significant (p < .05) low-low spatial clusters (low dental workforce availability, low percent dental services utilization). GWR revealed considerable local variations in the association between dental utilization and dental workforce availability. In the multivariate GWR models, 8.5% (t-statistics >1.96) and 13.45% (t-statistics >1.96) of counties showed positive and statistically significant relationships between the dental services utilization and workforce availability of dentists and dental hygienists, respectively. Conclusions Dental workforce availability was associated with dental services utilization in the Appalachian region; however, this association was not statistically significant

Audit to assess the quality of communication between operators and technicians in a fixed prosthodontic laboratory: educational and training implications.

PubMed

Dickie, J; Shearer, A C; Ricketts, D N J

2014-02-01

This audit aimed to assess the quality of communication between dental students/qualified dentists and dental technicians, increase the percentage of satisfactorily completed laboratory prescriptions and reduce the number of errors that can result from poor communication. A subsidiary aim was to educate students and staff in this respect. An audit of laboratory prescription completion was conducted within Dundee Dental Hospital. Four hundred and eighteen prescriptions for indirect fixed restorations completed by dental undergraduates and qualified staff were audited over a three month period (first audit cycle). Educational reminders on laboratory prescriptions were then provided to undergraduates and qualified staff, a further three hundred and twenty-two prescriptions were audited (second audit cycle) and compared with the first cycle. Satisfactorily completed prescriptions increased from 28% to 43% following basic educational intervention. However, this percentage still signifies a poor level of completion and the need for improvement. Some aspects of the prescription were completed better than others, but overall the standard remained poor with a significant number failing to comply with guidelines set by the UK General Dental Council, the European Union's Medical Devices Directive and the British Society for Restorative Dentistry (BSRD). Further undergraduate and staff training on laboratory prescription writing will be necessary through staff training events and developments in the undergraduate curriculum. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Dental OCT

NASA Astrophysics Data System (ADS)

Colston, Bill W.; Sathyam, Ujwal S.; Dasilva, Luiz B.; Everett, Matthew J.; Stroeve, Pieter; Otis, L. L.

1998-09-01

We present here the first in vivo optical coherence tomography (OCT) images of human dental tissue. A novel dental optical coherence tomography system has been developed. This system incorporates the interferometer sample arm and transverse scanning optics into a handpiece that can be used intraorally to image human dental tissues. The average imaging depth of this system varied from 3 mm in hard tissues to 1.5 mm in soft tissues. We discuss the application of this imaging system for dentistry and illustrate the potential of our dental OCT system for diagnosis of periodontal disease, detection of caries, and evaluation of dental restorations.

Dental anxiety and regularity of dental attendance in younger adults.

PubMed

Quteish Taani, D S M

2002-06-01

Dental anxiety constitutes a major problem for patients and dental care providers alike. The aim of this study was to examine the relationship between dental anxiety and regularity of dental attendance among young adults. A random sample of 15 course directors (1:50) was asked to participate in the study. Of these, only 10 course-directors agreed to handout the 500 questionnaires. All undergraduate students who participated in this study were asked to complete a questionnaire modified from Dental Fear Survey (DFS) questionnaire and 368 (73.6%) filled forms were returned for statistical analysis. The results showed that only 20.9% were regular dental attendee while the majority (79.1%) were irregular attendee. The reasons given for irregular attendance were 'lack of time' (36%), 'treatment not needed' (34.1%), 'fear from dentist' (13.3%) and 'cost' (16.6%). The sight and sensation of the injection and sight, sound, and sensation of the drill were the most common fear-eliciting stimuli. Increased heart rate was the commonest reported physiological response. Females had higher mean ratings, therefore tended to be more anxious than males. Dental anxiety represented by the mean responses to the items, was found to be higher in irregular dental attendee than regular attendee. In conclusion, this suggests that dental anxiety may affect the seeking of dental care, therefore to be taken into account when training dental care providers.

An Inquiry-Based Contextual Approach as the Primary Mode of Learning Science with Microcomputer-Based Laboratory Technology

ERIC Educational Resources Information Center

Espinoza, Fernando; Quarless, Duncan

2010-01-01

Science instruction can be designed to be laboratory-data driven. We report on an investigation of the use of thematic inquiry-based tasks with active incorporation of mathematics, science, and microcomputer-based laboratory technology in standards-correlated activities that enhanced learning experiences. Activities involved students in two major…

Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions

PubMed Central

Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin

2016-01-01

Objective To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Methods Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. Results All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. Conclusions The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken. PMID:27226958

Femtosecond lasers as novel tool in dental surgery

NASA Astrophysics Data System (ADS)

Serbin, J.; Bauer, T.; Fallnich, C.; Kasenbacher, A.; Arnold, W. H.

2002-09-01

There is a proven potential of femtosecond lasers for medical applications like cornea shaping [1], ear surgery or dental surgery [2]. Minimal invasive treatment of carious tissue has become an increasingly important aspect in modern dentistry. State of the art methods like grinding using turbine-driven drills or ablation by Er:YAG lasers [3] generate mechanical and thermal stress, thus generating micro cracks of several tens of microns in the enamel [4]. These cracks are starting points for new carious attacks and have to be avoided for long term success of the dental treatment. By using femtosecond lasers (1 fs=10 -15 s) for ablating dental tissue, these drawbacks can be overcome. We have demonstrated that femtosecond laser ablation offers a tool for crack-free generation of cavities in dental tissue. Furthermore, spectral analysis of the laser induced plasma has been used to indicate carious oral tissue. Our latest results on femtosecond laser dentistry will be presented, demonstrating the great potential of this kind of laser technology in medicine.

The Curriculum Development Project for the Medical Laboratory Technology Program at Miami-Dade Junior College, Miami, Florida. Final Report.

ERIC Educational Resources Information Center

Miami-Dade Junior Coll., FL. Div. of Allied Health Studies.

During Phase I of an Allied Health Professions Basic Improvement Grant, a five-member committee developed a curriculum for a medical laboratory technology program at Miami-Dade Junior College by: (1) defining competencies which differentiate a certified laboratory assistant from a medical laboratory technician, (2) translating expected laboratory…

Introduction of Digital Computer Technology Into the Undergraduate Chemistry Laboratory. Final Technical Report.

ERIC Educational Resources Information Center

Perone, Sam P.

The objective of this project has been the development of a successful approach for the incorporation of on-line computer technology into the undergraduate chemistry laboratory. This approach assumes no prior programing, electronics or instrumental analysis experience on the part of the student; it does not displace the chemistry content with…

Advanced methods for teaching electronic-nose technologies to diagnosticians and clinical laboratory technicians

Treesearch

Alphus D. Wilson

2012-01-01

Electronic-detection technologies and instruments increasingly are being utilized in the biomedical field to perform a wide variety of clinical operations and laboratory analyses to facilitate the delivery of health care to patients. The introduction of improved electronic instruments for diagnosing diseases and for administering treatments has required new training of...

75 FR 55199 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

...Section 342(b) of the National Defense Authorization Act (NDAA) for Fiscal Year (FY) 1995, Public Law (Pub. L.) 103-337 (10 U.S.C. 2358 note), as amended by section 1109 of NDAA for FY 2000, Public Law 106-65, and section 1114 of NDAA for FY 2001, Public Law 106-398, authorizes the Secretary of Defense to conduct personnel demonstration projects at DoD laboratories designated as Science and Technology Reinvention Laboratories (STRLs) to determine whether a specified change in personnel management policies or procedures would result in improved Federal personnel management. Section 1105 of the NDAA for FY 2010, Public Law 111-84, 123 Stat. 2486, October 28, 2009, designates additional DoD laboratories as STRLs for the purpose of designing and implementing personnel management demonstration projects for conversion of employees from the personnel system which applied on October 28, 2009. The ARDEC is listed in subsection 1105(a) of NDAA for FY 2010 as one of the newly designated STRLs.

Bonding to oxide ceramics—laboratory testing versus clinical outcome.

PubMed

Kern, Matthias

2015-01-01

Despite a huge number of published laboratory bonding studies on dental oxide ceramics clinical long-term studies on resin bonded oxide ceramic restorations are rare. The purpose of this review is to present the best available clinical evidence for successful bonding of dental oxide ceramic restorations. Clinical trials with resin-bonded restorations that had no or only limited mechanical retention and were made from alumina or zirconia ceramic were identified using an electronic search in PubMed database. Overall 10 publications with clinical trials could be identified. Their clinical outcome was compared with that laboratory bond strength studies. Clinical data provide strong evidence that air-abrasion at a moderate pressure in combination with using phosphate monomer containing primers and/or luting resins provide long-term durable bonding to glass-infiltrated alumina and zirconia ceramic under the humid and stressful oral conditions. As simple and clinically reliable bonding methods to oxide ceramics exist, the rationale for development of alternative bonding methods might be reconsidered especially when these methods are more time consuming or require rather complicated and/or technique sensitive procedures. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

A New Species of Science Education: Harnessing the Power of Interactive Technology to Teach Laboratory Science

ERIC Educational Resources Information Center

Reddy, Christopher

2014-01-01

Interactive television is a type of distance education that uses streaming audio and video technology for real-time student-teacher interaction. Here, I discuss the design and logistics for developing a high school laboratory-based science course taught to students at a distance using interactive technologies. The goal is to share a successful…

Radiation and Health Technology Laboratory Capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bihl, Donald E.; Lynch, Timothy P.; Murphy, Mark K.

2005-07-09

The Radiological Standards and Calibrations Laboratory, a part of Pacific Northwest National Laboratory (PNNL)(a) performs calibrations and upholds reference standards necessary to maintain traceability to national standards. The facility supports U.S. Department of Energy (DOE) programs at the Hanford Site, programs sponsored by DOE Headquarters and other federal agencies, radiological protection programs at other DOE and commercial nuclear sites and research and characterization programs sponsored through the commercial sector. The laboratory is located in the 318 Building of the Hanford Site's 300 Area. The facility contains five major exposure rooms and several laboratories used for exposure work preparation, low-activity instrumentmore » calibrations, instrument performance evaluations, instrument maintenance, instrument design and fabrication work, thermoluminescent and radiochromic Dosimetry, and calibration of measurement and test equipment (M&TE). The major exposure facilities are a low-scatter room used for neutron and photon exposures, a source well room used for high-volume instrument calibration work, an x-ray facility used for energy response studies, a high-exposure facility used for high-rate photon calibration work, a beta standards laboratory used for beta energy response studies and beta reference calibrations and M&TE laboratories. Calibrations are routinely performed for personnel dosimeters, health physics instrumentation, photon and neutron transfer standards alpha, beta, and gamma field sources used throughout the Hanford Site, and a wide variety of M&TE. This report describes the standards and calibrations laboratory.« less

Implementation of laser technology and treatment at county level in the Swedish Public Dental Service.

PubMed

Bergholm, Åsa; Östberg, Anna-Lena; Gabre, Pia

2014-01-01

The aim of this study was to obtain an understanding of the factors that affected the way new technology and methods were used in dentistry after a training program. A qualitative research method was used to collect data. Nine dentists working in the Public Dental Service (PDS) in Uppsala County in Sweden agreed to be interviewed in the study. They worked in five different clinics, all with laser equipment, and had received training in the use of lasers. The interviews were tape recorded and transcribed, and were analysed using manifest and latent qualitative content analysis. The categories in this study were identified as "Prerequisites and obstacles to imple- mentation", "Attitudes to laser technology and treatments" and "Laser technology in the future'". The dentists described working with lasers as complicated and problematic. They had concerns about the method relating to the working environment, evidence of efficacy of treatment, costs, and benefits for patients and dentists. The main finding was that the decision to adopt the technology seemed to be based on individual perceptions of the value of lasers compared to other ways of achieving the same goal. They provided uniform proposals regarding how an organization should implement new methods, including an emphasis on the importance of preparation and having opportunities to be able to test and evaluate the technology. Another important factor was support from surrounding staff, colleagues and management. Despite all the barriers, the respondents were positive about working with lasers in the future, mainly due to their belief that patients would demand laser treatment. In conclusion both individual and organizational factors affected the extent to which the respondents used the laser. The main finding was the individual perception of the value of lasers compared to other methods which could achieve the same goal.

Expanded function allied dental personnel and dental practice productivity and efficiency.

PubMed

Beazoglou, Tryfon J; Chen, Lei; Lazar, Vickie F; Brown, L Jackson; Ray, Subhash C; Heffley, Dennis R; Berg, Rob; Bailit, Howard L

2012-08-01

This study examined the impact of expanded function allied dental personnel on the productivity and efficiency of general dental practices. Detailed practice financial and clinical data were obtained from a convenience sample of 154 general dental practices in Colorado. In this state, expanded function dental assistants can provide a wide range of reversible dental services/procedures, and dental hygienists can give local anesthesia. The survey identified practices that currently use expanded function allied dental personnel and the specific services/procedures delegated. Practice productivity was measured using patient visits, gross billings, and net income. Practice efficiency was assessed using a multivariate linear program, Data Envelopment Analysis. Sixty-four percent of the practices were found to use expanded function allied dental personnel, and on average they delegated 31.4 percent of delegatable services/procedures. Practices that used expanded function allied dental personnel treated more patients and had higher gross billings and net incomes than those practices that did not; the more services they delegated, the higher was the practice's productivity and efficiency. The effective use of expanded function allied dental personnel has the potential to substantially expand the capacity of general dental practices to treat more patients and to generate higher incomes for dental practices.

[Technology and progress in the use of information systems in the dental office].

PubMed