Prevalence of dental anomalies in deciduous dentition and its association with succedaneous dentition: A cross-sectional study of 4180 South Indian children.

PubMed

Shilpa, G; Gokhale, Niraj; Mallineni, Sreekanth Kumar; Nuvvula, Sivakumar

2017-01-01

The objective of this study was to estimate the prevalence of dental anomalies in primary dentition of Indian population. This cross-sectional study was conducted on 4180 children in the age of 2-6 years. Anomalies were classified based on Kreiborg criteria. The term "double tooth" was used to avoid misinterpretation between gemination. and fusion. Patients having radiographs were also examined for associated dental anomalies in permanent dentition. The occurrence and gender prevalence were evaluated using descriptive statistics. About 95. (2.27%) children exhibited at least one dental anomaly. Thirty.seven children showed 51 missing teeth. (0.88%), mostly in lower right incisors with a statistically significant difference between arches. (P = 0.0056) Nine children. (0.21%) had supernumerary teeth commonly in the right maxilla. Two cases of oligodontia. (0.04%) and talon cusps. (0.04%) and one case of triple tooth. (0.02%) were observed. Forty children. (0.95%) had 43 double teeth mostly in the right mandible with a statistically significant difference between the arches. (P = 0.0105). No significant difference was observed based on gender and arch, but they were statistically significant between the right and left sides. (P = 0.018). Among the children with radiographs available, 45% showed anomalies in the succedaneous dentition. The prevalence rates of children with double tooth, hypodontia, and hyperdontia in our study are 0.95%, 0.88%, and 0.21%, respectively. The overall prevalence rate of anomalies among boys was higher than girls.

Complications and Clinical Considerations of the Implant-Retained Zirconia Complete-Arch Prosthesis with Various Opposing Dentitions.

PubMed

Gonzalez, Jorge; Triplett, Robert G

To evaluate the performance of the implant-retained zirconia complete-arch prosthesis with various opposing dentitions. The 40 patients included in this retrospective case series study were treated with one or two implant-retained zirconia complete-arch prostheses (ZIRCAP) using the Zirkonzahn protocol. Prettau zirconia frames were created with strategic cutbacks in the structure to extend zirconia incisal coverage of the esthetic anterior sextants and complete monolithic zirconia in the molar areas; subsequent layers of porcelain were applied to nonfunctional and esthetic areas. Patients had three possible occlusal scenarios: (1) maxillary ZIRCAP and mandibular ZIRCAP, (2) maxillary ZIRCAP and mandibular natural dentition, and (3) maxillary ZIRCAP and mandibular conventional hybrid prosthesis. Complications were recorded during follow-up appointments 3, 6, and 12 months after definitive prosthesis delivery. The mean treatment observation period was 33 months. Eight prosthetic complications were noted for the 40 implant-retained zirconia complete-arch prostheses (18.18%), including six cases of minor porcelain chipping and two cases of debonding of the metal insert from the zirconia framework. Maxillary ZIRCAP opposing mandibular ZIRCAP and maxillary ZIRCAP opposing mandibular natural dentition occlusal scenarios presented the same complication ratio of 4. No complications were seen in the maxillary ZIRCAP opposing mandibular conventional hybrid prosthesis group, yet 16 complications were found as denture tooth fractures in 12 mandibular conventional hybrid prostheses (ratio of 0.75). The results indicate that the implant-retained zirconia complete-arch prosthesis offers acceptable performance for use as an alternative to the conventional titanium framework acrylic veneer prosthesis for complete edentulism with a lower incidence of prosthetic complications and fewer maintenance appointments. Chipping of veneering porcelain was the most common complication, but a low incidence was observed in this study. Acrylic denture teeth may represent the weakest link when restoring complete edentulism with a maxillary ZIRCAP and mandibular conventional hybrid prosthesis.

Loss of Permanent First Molars in the Mixed Dentition: Circumstances Resulting in Extraction and Requiring Orthodontic Management.

PubMed

Mathu-Muju, Kavita R; Kennedy, David B

2016-10-15

Extraction of significantly compromised permanent first molars may be indicated during the mixed dentition stage of occlusal development. The purpose of this article was to review circumstances that can result in the loss of a permanent first molar-including dental caries, molar incisor hypomineralization, eruption disturbances of permanent teeth, and failure of restorative treatment to affirm that a complete dental arch is not necessary for the existence of a functional dental arch. The extraction of permanent first molar(s) with subsequent orthodontic treatment in a young patient can be considered a cost-effective alternative to placing complex restorations that require replacement over the lifespan. Approaches to establish a functional dental arch in the event of the loss of a permanent first molar(s) are outlined. Additionally, orthodontic diagnostic and treatment principles are reviewed. Case histories are provided to illustrate the clinical management of permanent first molar extractions to achieve a functional dental arch.

[Treatment of adult bimaxillary arch protrusion with micro-implant anchorage].

PubMed

Chen, Cheng; Zhang, Xiao-Rong

2015-02-01

In this study, micro-implants were used in 15 adult patients with mild and moderate bimaxillary arch protrusion or crowding. Cephalometric analysis was used to analyze hard and soft-tissues change before and after treatment, with the aim to investigate the effects of treatment on adult bimaxillary arch protrusion with micro-implant anchorage. Fifteen adult patients with mild and moderate bimaxillary arch protrusion were selected in this study. Micro-implants were inserted into the zygomaticoalveolar ridge of maxilla and the external oblique line of mandible. A NiTi coil spring was attached to the micro-implant to drag the whole upper and lower dentition for distal movement. Cephalometrics were taken before and after treatment, and the changes of soft and hard-tissue profile were studied. SPSS13.0 software package was used to analyze the data. (1)Sixty micro-implants remained stable.(2)SNA, SNB had no significant changes (P>0.05), and the relationship between the maxilla and the mandible did not change significantly. U1/NA, U1-NA, L1/NB, L1-NB and U1/L1 changes in hard tissue had significant difference in cephalometric measurement (P<0.05). The upper and lower anterior teeth were more retrusive, and the tipping of incisor decreased significantly.(3)Cephalometric analysis showed that lateral appearance improved and soft tissue cephalometric-related measurements such as Cm-Sn-UL,LL-B'-Pos increased significantly (P<0.01). (4)Molars and incisors acquired distal movement. Micro-implant can provide not only excellent skeletal anchorage but also a novel way to distalize the whole dentition efficiently.

Early Complications of Immediate Loading in Edentulous Full-Arch Restorations: A Retrospective Analysis of 88 Cases.

PubMed

Cercadillo-Ibarguren, Iñaki; Sánchez-Torres, Alba; Figueiredo, Rui; Valmaseda-Castellón, Eduard

To describe the clinical outcomes and complications related to provisional prostheses after full-arch implant-supported rehabilitation by means of an immediate loading protocol. This retrospective cohort study included patients who were consecutively treated with full-arch implant-supported restorations with a minimum of four implants (Replace Select Tapered TiUnite, Nobel Biocare AB) per arch and conical abutments (multi-unit, Nobel Biocare AB) by means of an immediate loading protocol. The surgical procedures were performed between May 2006 and June 2014 by a single oral surgeon. Demographic, surgical, and prosthetic variables were collected, and biologic and mechanical complications were registered. A total of 61 maxillae (57%) and 46 mandibles (43%) were treated in 88 patients (40 men and 48 women) with a mean age of 62.4 years. A total of 558 implants were placed, 295 in postextraction sockets. A total of 331 implants (59.3%) were placed in the maxilla and 227 (40.7%) in the mandible. Within a 9-month period, 18 prostheses (16.8%) fractured (15 maxillary and 3 mandibular); in nine of these patients the opposing dentition was a full-arch, implant-supported restoration, and in the remaining nine patients, it was natural dentition. Six (1.1%) maxillary and three (0.5%) mandibular implants failed. A high implant survival rate is expected in the short term following this immediate loading protocol. Fracture of the provisional prosthesis is a common finding, affecting 17% of patients, and is significantly more prevalent in patients with bruxism and in maxillary prostheses.

Relationship between vertical facial patterns and dental arch form in class II malocclusion.

PubMed

Grippaudo, Cristina; Oliva, Bruno; Greco, Anna Lucia; Sferra, Simone; Deli, Roberto

2013-11-07

The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasion/mandibular plane angle (SN-MP)) in skeletal class II untreated patients. A sample of 73 Caucasians patients with untreated skeletal class II in permanent dentition was divided into three groups according to the values of the angle SN-MP. An evaluation of the arch form was performed by angular and linear relation values on each patient. Regression analysis was used to determine the statistical significance of the relationships between SN-MP angle and dental arch form. The differences among the three groups were analyzed for significance using a variance analysis. A decrease of the upper arch transversal diameters in high SN-MP angle patients and an increase in low angle SN-MP ones (P<0.05) were shown. Result analysis showed a change in upper arch shape, with a smaller intercanine width in patients with high SN-MP angle and a greater one in low angle patients. As SN-MP angle increased, the upper arch form tended to be narrower. No statistically significant difference in mandibular arch form among the three groups was found, except the angle value related to incisors position. The results showed the association between the upper dental arch form and the vertical facial pattern. On the contrary, the lower arch form was not related to the mandibular divergence.

A Comparative Evaluation of Mixed Dentition Analysis on Reliability of Cone Beam Computed Tomography Image Compared to Plaster Model

PubMed Central

Gowd, Snigdha; Shankar, T; Dash, Samarendra; Sahoo, Nivedita; Chatterjee, Suravi; Mohanty, Pritam

2017-01-01

Aims and Objective: The aim of the study was to evaluate the reliability of cone beam computed tomography (CBCT) obtained image over plaster model for the assessment of mixed dentition analysis. Materials and Methods: Thirty CBCT-derived images and thirty plaster models were derived from the dental archives, and Moyer's and Tanaka-Johnston analyses were performed. The data obtained were interpreted and analyzed statistically using SPSS 10.0/PC (SPSS Inc., Chicago, IL, USA). Descriptive and analytical analysis along with Student's t-test was performed to qualitatively evaluate the data and P < 0.05 was considered statistically significant. Results: Statistically, significant results were obtained on data comparison between CBCT-derived images and plaster model; the mean for Moyer's analysis in the left and right lower arch for CBCT and plaster model was 21.2 mm, 21.1 mm and 22.5 mm, 22.5 mm, respectively. Conclusion: CBCT-derived images were less reliable as compared to data obtained directly from plaster model for mixed dentition analysis. PMID:28852639

Predictors of postretention stability of mandibular dental arch dimensions in patients treated with a lip bumper during mixed dentition followed by fixed appliances.

PubMed

Raucci, Gaetana; Pachêco-Pereira, Camila; Elyasi, Maryam; d'Apuzzo, Fabrizia; Flores-Mir, Carlos; Perillo, Letizia

2017-03-01

To identify which dental and/or cephalometric variables were predictors of postretention mandibular dental arch stability in patients who underwent treatment with transpalatal arch and lip bumper during mixed dentition followed by full fixed appliances in the permanent dentition. Thirty-one patients were divided into stable and relapse groups based on the postretention presence or absence of relapse. Intercuspid, interpremolar, and intermolar widths; arch length and perimeter; crowding; and lower incisor proclination were evaluated before treatment (T0), after lip bumper treatment (T1), after fixed appliance treatment (T2), and a minimum of 3 years after removal of the full fixed appliance (T3). Logistic regression analyses were performed to evaluate the effect of changes between T0 and T1, as predictive variables, on the occurrence of relapse at T3. The model explained 53.5 % of the variance in treatment stability and correctly classified 80.6 % of the sample. Of the seven prediction variables, intermolar and interpremolar changes between T0 and T1 (P = .024 and P = .034, respectively) were statistically significant. For every millimeter of increase in intermolar and interpremolar widths there was a 1.52 and 2.70 times increase, respectively, in the odds of having stability. There was also weak evidence for the effect of sex (P = .047). The best predictors of an average 4-year postretention mandibular dental arch stability after treatment with a lip bumper followed by full fixed appliances were intermolar and interpremolar width increases during lip bumper therapy. The amount of relapse in this crowding could be considered clinically irrelevant.

Full-arch implant-retained prosthetics in general dental practice.

PubMed

Rosenbaum, Nigel

2012-03-01

The loss of all teeth from one or both dental arches is a significant disability affecting self-confidence, communication, masticatory function and aesthetics. Whilst missing teeth cannot be restored to the natural state, the development of a prosthetic dentition has been a goal of dental science throughout the centuries. Contemporary techniques allow for the replacement of missing dentition with fixed or removable solutions, solving many of the problems. Implant dentistry has transformed this area of medicine. This article provides dental practitioners with an overview of this important area of patient care. Dental practitioners in clinical practice will frequently see edentulism; a good understanding of the available options for rehabilitation is essential.

Dental anomalies in 14 patients with IP: clinical and radiological analysis and review.

PubMed

Santa-Maria, Fernanda D; Mariath, Luiza Monteavaro; Poziomczyk, Cláudia S; Maahs, Marcia A P; Rosa, Rafael F M; Zen, Paulo R G; Schüller-Faccini, Lavínia; Kiszewski, Ana Elisa

2017-06-01

Current knowledge on dental anomalies in patients with incontinentia pigmenti (IP) has been obtained by examining case reports; however, an overall characterization of such alterations remains lacking. The objective of this study was to determine the frequency, type and location of dental alterations in IP using a case series. Fourteen patients (9 children and 5 adults) with a clinical diagnosis of IP who presented dental anomalies were included in this study. All patients were administered a clinical questionnaire, dental examination and radiological investigation. In the present case series, agenesis of primary dentition was present in 60 % of patients and agenesis of permanent tooth was present in 92.8 % of patients. Most cases were missing at least 6 teeth. Second molar agenesis was present in 13 patients (92.8 %). Anomalies in dental crowns occurred in 71.4 % of cases, and the central incisor was most frequently affected. Two adult patients still had primary teeth. Malocclusion was found in 10 patients (71.4 %). High-arched palate was observed in 7 (50 %) patients. Patients with IP present alterations in both primary and permanent dentition. Because the agenesis of permanent teeth is more common, primary teeth are not always replaced. In addition, the durability of primary dentition appears to be greater in IP. This study shows that patients with IP experience significant loss of teeth, especially in permanent dentition, and have an increased risk of high-arched palate compared to the general population. Prophylactic care of primary teeth in IP is relevant for improving functional and aesthetic outcomes until dental prostheses are implanted.

Occlusal traits of deciduous dentition of preschool children of Indian children

PubMed Central

Bahadure, Rakesh N.; Thosar, Nilima; Gaikwad, Rahul

2012-01-01

Objectives: To assess the occlusal relationship, canine relationship, crowding, primate spaces, and anterior spacing in both maxillary and mandibular arches of primary dentition of Indian children of Wardha District and also to study the age-wise differences in occlusal characteristics. Materials and Methods: A total of 1053 (609 males and 444 females) children of 3-5 year age group with complete primary dentition were examined for occlusal relationship, canine relationship, crowding, primate spaces, and anterior spacing in both maxillary and mandibular arches. Results: The data after evaluation showed significant values for all parameters except mandibular anterior spacing, which was 47.6%. Mild crowding was prevalent at 5 year age group and moderate crowding was common at 3 year-age group. Conclusion: Evaluated parameters such as terminal molar relationship and canine relationship were predominantly progressing toward to normal but contacts and crowding status were contributing almost equal to physiologic anterior spacing. Five-year-age group showed higher values with respect to all the parameters. PMID:23633806

Early treatment of posterior crossbite - a randomised clinical trial

PubMed Central

2013-01-01

Background The aim of this randomised clinical trial was to assess the effect of early orthodontic treatment in contrast to normal growth effects for functional unilateral posterior crossbite in the late deciduous and early mixed dentition by means of three-dimensional digital model analysis. Methods This randomised clinical trial was assessed to analyse the orthodontic treatment effects for patients with functional unilateral posterior crossbite in the late deciduous and early mixed dentition using a two-step procedure: initial maxillary expansion followed by a U-bow activator therapy. In the treatment group 31 patients and in the control group 35 patients with a mean age of 7.3 years (SD 2.1) were monitored. The time between the initial assessment (T1) and the follow-up (T2) was one year. The orthodontic analysis was done by a three-dimensional digital model analysis. Using the ‘Digimodel’ software, the orthodontic measurements in the maxilla and mandible and for the midline deviation, the overjet and overbite were recorded. Results Significant differences between the control and the therapy group at T2 were detected for the anterior, median and posterior transversal dimensions of the maxilla, the palatal depth, the palatal base arch length, the maxillary arch length and inclination, the midline deviation, the overjet and the overbite. Conclusions Orthodontic treatment of a functional unilateral posterior crossbite with a bonded maxillary expansion device followed by U-bow activator therapy in the late deciduous and early mixed dentition is an effective therapeutic method, as evidenced by the results of this RCT. It leads to three-dimensional therapeutically induced maxillary growth effects. Dental occlusion is significantly improved, and the prognosis for normal craniofacial growth is enhanced. Trial registration Registration trial DRKS00003497 on DRKS PMID:23339736

Transition from a failing dentition to a removable implant-supported prosthesis: a staged approach.

PubMed

Cordaro, Luca; Torsello, Ferruccio; Ribeiro, Carlos Accorsi

2010-05-01

Patients with hopeless dentition often present difficulties in the management of the transitional phase to the final restoration. This article describes a staged approach to achieve a full-arch, implant-supported, removable prosthesis in patients with a hopeless dentition. The approach described allows the clinician to proceed in a staged manner and facilitate prosthetic steps by keeping fixed references for vertical dimension. This technique includes initial conservative periodontal care and, afterward, extraction of some strategic teeth, while others are temporarily maintained. At this point, the implants are positioned, and during the healing period, the remaining natural abutments are used for occlusal reference and to stabilize the removable provisional prosthesis. After osseointegration of the implants, the residual teeth are extracted and the final prosthesis is delivered. The main advantages of the technique include maintenance of function during treatment, stabilization of the removable provisional (especially in the mandibular arch), prosthetic-guided insertion of implants, and easier retrieval of prosthetic references. The main drawbacks are longer treatment time and the need for two surgical steps.

Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage.

PubMed

Park, Heon-Mook; Kim, Byoung-Ho; Yang, Il-Hyung; Baek, Seung-Hak

2012-12-01

This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6°, 2.5°, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.

Distribution of dental plaque and gingivitis within the dental arches.

PubMed

Sreenivasan, Prem K; Prasad, Kakarla V V

2017-10-01

Objective The natural accumulation of supragingival plaque on surfaces of human teeth is associated with gingival inflammation and the initiation of common oral diseases. This study evaluated the distribution of dental plaque and gingivitis scores within the dental arches after prophylaxis. Methods Adult subjects from the Dharwad, India area representing the general population who provided written informed consent were scheduled for screening. Healthy subjects over the age of 18 years, not currently requiring any medical or dental care, and presenting with a complement of at least 20 natural teeth were recruited for this parallel design study. Enrolled subjects (n = 41) underwent oral examinations for dental plaque (PI) and gingivitis (GI) using the Turesky modification of the Quigley-Hein and the Löe-Silness Index, respectively, at the baseline visit, followed by a whole mouth dental prophylaxis. Subjects were given fluoride toothpaste for twice daily oral hygiene for the next 30 days. Subjects were recalled on days 15 and 30 for PI and GI examinations identical to baseline. Results Analyses indicated that mean scores for PI and GI on either arch and the whole mouth were higher than 2 and 1, respectively, during all examinations. Anterior surfaces consistently exhibited lower PI scores than posterior regions of either arch, or the entire dentition. Regional GI differences within the dentition were similar to PI scores, with lower scores on anterior than posterior teeth. Prophylaxis reduced both the frequency and mean scores of both PI and GI, irrespective of arch, with lower scores observed on anterior than posterior regions during all recall visits. Molar and lingual regions consistently exhibited higher PI and GI scores compared with anterior surfaces. At all examinations, mean scores for both plaque and gingivitis were higher on approximal vestibular than mid-vestibular surfaces. Conclusions Differences observed in PI and GI within the dentition have several practical implications: (a) there are advantages of whole mouth assessments for oral health (b) a need for oral hygiene formulations to reduce the larger deposits of dental plaque in the posterior region and resultant gingival inflammation, and (c) a requirement for ongoing oral hygiene education.

Evaluation of the alignment efficiency of nickel-titanium and copper-nickel-titanium archwires in patients undergoing orthodontic treatment over a 12-week period: A single-center, randomized controlled clinical trial.

PubMed

Aydın, Burcu; Şenışık, Neslihan Ebru; Koşkan, Özgür

2018-05-01

The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi (27℃) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. No statistically significant difference was observed between NiTi and CuNiTi according to LII ( p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group ( p < 0.001). Inter-first premolar width showed a statistically significant interaction in week × diameter × application ( p < 0.05). The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

Prevalence of infraocclusion of primary molars determined using a new 2D image analysis methodology.

PubMed

Odeh, R; Mihailidis, S; Townsend, G; Lähdesmäki, R; Hughes, T; Brook, A

2016-06-01

The reported prevalence of infraocclusion varies widely, reflecting differences in definitions and measurement/scoring approaches. This study aimed to quantify the prevalence and extent of infraocclusion in singletons and twins during the late mixed dentition stage of dental development using a new diagnostic imaging method and objective criteria. The study also aimed to determine any associations between infraocclusion and gender, arch type, arch side and tooth type. Two samples were analysed, 1454 panoramic radiographs of singletons and 270 dental models of twins. Both samples ranged in age from 8 to 11 years. Adobe Photoshop CS5 was used to measure the extent of infraocclusion. Repeatability tests showed systematic and random errors were small. The prevalence in the maxilla was low (<1%), whereas the prevalence in the mandible was 22% in the singleton sample and 32% in the twin sample. The primary mandibular first molar was affected more often than the second molar. There was no significant difference in the expression between genders or sides. A new technique for measuring infraocclusion has been developed with high intra- and interoperator reproducibility. This method should enhance early diagnosis of tooth developmental abnormalities and treatment planning during the late mixed dentition stage of development. © 2016 Australian Dental Association.

Applicability of the Tanaka-Johnston and Moyers mixed dentition analyses in Northeast Han Chinese.

PubMed

Sherpa, Jangbu; Sah, Gopal; Rong, Zeng; Wu, Lipeng

2015-06-01

To assess applicability of the Tanaka-Johnston and Moyers prediction methods in a Han ethnic group from Northeast China and to develop prediction equations for this same population. Cross-sectional study. Department of Orthodontics, School of Stomatology, Jiamusi University, Heilongjiang, China. A total of 130 subjects (65 male and 65 female) aged 16-21 years from a Han ethnic group of Northeast China were recruited from dental students and patients seeking orthodontic treatment. Ethnicity was verified by questionnaire. Mesio-distal tooth width was measured using Digital Vernier calipers. Predicted values were obtained from the Tanaka-Johnston and Moyers methods in both arches were compared with the actual measured widths. Based on regression analysis, prediction equations were developed. Tanaka-Johnston equations were not precise, except for the upper arch in males. However, the Moyers 85th percentile in the upper arch and 75th percentile in the lower arch predicted the sum precisely in males. For females, the Moyers 75th percentile predicted the sum precisely for the upper arch, but none of the Moyers percentiles predicted in the lower arch. Both the Tanaka-Johnston and Moyers method may not be applied universally without question. Hence, it may be safer to develop regression equations for specific populations. Validating studies must be conducted to confirm the precision of these newly developed regression equations.

Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage.

PubMed

Ali, Dler; Mohammed, Hnd; Koo, Seung-Hwan; Kang, Kyung-Hwa; Kim, Sang-Cheol

2016-09-01

The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage

PubMed Central

Ali, Dler; Mohammed, Hnd; Koo, Seung-Hwan; Kang, Kyung-Hwa

2016-01-01

Objective The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. Results All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars. PMID:27668191

Malocclusion in Early Anatomically Modern Human: A Reflection on the Etiology of Modern Dental Misalignment

PubMed Central

Sarig, Rachel; Slon, Viviane; Abbas, Janan; May, Hila; Shpack, Nir; Vardimon, Alexander Dan; Hershkovitz, Israel

2013-01-01

Malocclusions are common in modern populations. Yet, as the study of occlusion requires an almost intact dentition in both the maxilla and mandible, searching for the ultimate cause of malocclusion is a challenge: relatively little ancient material is available for research on occlusal states. The Qafzeh 9 skull is unique, as its preserved dentition allowed us to investigate the presence and manifestations of malocclusion. The aim of this study was thus to examine the occlusal condition in the Qafzeh 9 specimen in light of modern knowledge regarding the etiology of malocclusion. We revealed a pathologic occlusion in the Qafzeh 9 skull that probably originated in the early developmental stage of the dentition, and was aggravated by forces applied by mastication. When arch continuity is interrupted due to misalignment of teeth as in this case, force transmission is not equal on both sides, causing intra-arch outcomes such as mesialization of the teeth, midline deviation, rotations and the aggravation of crowding. All are evident in the Qafzeh 9 skull: the midline deviates to the left; the incisors rotate mesio-buccally; the left segment is constricted; the left first molar is buccally positioned and the left premolars palatally tilted. The inter-arch evaluation revealed anterior cross bite with functional shift that might affect force transmission and bite force. In conclusion, the findings of the current study suggest that malocclusion of developmental origin was already present in early anatomically modern humans (AMH) (the present case being the oldest known case, dated to ca. 100,000 years); that there is no basis to the notion that early AMH had a better adjustment between teeth and jaw size; and that jaw-teeth size discrepancy could be found in prehistoric populations and is not a recent phenomenon. PMID:24278319

Transforce lingual appliances pre-adjusted invisible appliances simplify treatment.

PubMed

Clark, William John

2011-01-01

Transforce lingual appliances are designed to be used in conjunction with conventional fixed appliances. Lingual arch development is normally followed by bonded fixed appliances to detail the occlusion. Alternatively Transforce appliance treatment is an efficient method of preparing complex malocclusions prior to a finishing stage with invisible appliances. This approach is ideal for adult treatment, using light continuous forces for arch development with appliances that are comfortable to wear. Sagittal and Transverse appliances are designed for arch development in a range of sizes for contracted arches. They can be used to treat all classes of malocclusion and are pre-adjusted fixed/removable devices for non-compliance treatment. Force modules with nickel titanium coil springs enclosed in a tube deliver a gentle, biocompatible continuous force with a long range of action. They are excellent for mixed dentition and ideal for adult arch development. There are multiple sizes for upper and lower arch development and a sizing chart may be placed over a study model for correct selection, eliminating the need for laboratory work.

Tooth-size discrepancy: A comparison between manual and digital methods

PubMed Central

Correia, Gabriele Dória Cabral; Habib, Fernando Antonio Lima; Vogel, Carlos Jorge

2014-01-01

Introduction Technological advances in Dentistry have emerged primarily in the area of diagnostic tools. One example is the 3D scanner, which can transform plaster models into three-dimensional digital models. Objective This study aimed to assess the reliability of tooth size-arch length discrepancy analysis measurements performed on three-dimensional digital models, and compare these measurements with those obtained from plaster models. Material and Methods To this end, plaster models of lower dental arches and their corresponding three-dimensional digital models acquired with a 3Shape R700T scanner were used. All of them had lower permanent dentition. Four different tooth size-arch length discrepancy calculations were performed on each model, two of which by manual methods using calipers and brass wire, and two by digital methods using linear measurements and parabolas. Results Data were statistically assessed using Friedman test and no statistically significant differences were found between the two methods (P > 0.05), except for values found by the linear digital method which revealed a slight, non-significant statistical difference. Conclusions Based on the results, it is reasonable to assert that any of these resources used by orthodontists to clinically assess tooth size-arch length discrepancy can be considered reliable. PMID:25279529

Clinical interpretation of a masticatory normative indicator analysis of masticatory function in subjects with different occlusal and prosthodontic status.

PubMed

Witter, Dick J; Woda, Alain; Bronkhorst, Ewald M; Creugers, Nico H J

2013-05-01

To analyse the masticatory function of subjects characterised by different occlusal and prosthodontic status. Using Optosil(®) as a test food, the masticatory normative indicator (MNIOPT) was used to differentiate between sufficient ('normal') and impaired masticatory function. Outcomes of occlusal force and masticatory tests were aggregated from three earlier studies dealing with four denture groups and three natural dentition groups. The four denture groups had a complete removable dental prosthesis in the upper jaw, and displayed one of the four following lower jaw prosthodontic rehabilitations: (i) complete removable dental prosthesis on a low mandible; (ii) complete removable dental prosthesis on a higher mandible; (iii) overdenture on natural roots; and (iv) overdenture on dental implants. The three natural dentition groups were: (i) shortened dental arch; (ii) complete dentition in older participants, and (iii) complete dentition in younger participants. All participants were women. They performed the same tests twice, and outcomes were averaged. A MNIOPT value of 3.68 mm was determined from the participants with complete natural dentitions. Applying the MNIOPT to the participants in the denture groups pointed at a considerable chance for impaired masticatory function, except for participants in the overdenture -implants group. The four denture groups compensated for reduced masticatory efficiency by increased number of masticatory cycles and prolonged mastication time until 'swallowing'. Nevertheless, they also 'swallowed' larger particles compared to the complete dentition group. For a given patient or for a group of subjects with specific dental conditions, MNI enables to discriminate between a sufficient ('normal') and an impaired masticatory function. Copyright © 2013 Elsevier Ltd. All rights reserved.

Incisor and molar overjet, arch contraction, and molar relationship in the mixed dentition in repaired complete unilateral cleft lip and palate: A qualitative and quantitative appraisal.

PubMed

Disthaporn, Suteeta; Suri, Sunjay; Ross, Bruce; Tompson, Bryan; Baena, Diogenes; Fisher, David; Lou, Wendy

2017-07-01

To compare the mixed dentition incisor and molar overjet, severity of contraction of the dental arch, and the sagittal molar relationship on the cleft side vs the noncleft side in children with repaired complete unilateral cleft of the lip and palate (UCLP). Orthodontic records taken prior to orthodontic preparation for alveolar bone grafting were screened to select study casts from patients with nonsyndromic repaired complete UCLP who did not have mandibular skeletal or dental asymmetry. The study sample comprised dental casts from 74 children aged 8.9 ± 1 years. Standardized digital photographs were acquired at 1:1 magnification. A coordinate system was developed using digital image-processing software (Photoshop CS4 and Adobe Illustrator). Incisor and molar overjet, Angle's classification, and arch contraction were recorded. Descriptive statistics, paired t-tests, and kappa statistics were used to compare the cleft and noncleft sides. A negative overjet of -1 to -5 mm was often present at the incisors, with greater frequency and magnitude on the cleft side. Class II molar relation was more frequent on the cleft side (61.1%) than on the noncleft side (47.2%). Significantly greater contraction of the cleft side deciduous canine and deciduous first molar was noted, while the difference was very minor at the first permanent molar. Cleft side maxillary arch contraction was most severe in the deciduous canine and first deciduous molar region and progressively less severe in the posterior region of the arch. A greater frequency and severity of negative overjet and Class II molar relationship was seen on the cleft side.

Orthodontic findings in the deciduous and early mixed dentition--inferences for a preventive strategy.

PubMed

Stahl, Franka; Grabowski, Rosemarie

2003-11-01

The aim of the present epidemiologic study was to obtain representative basic data on the frequency, extent and age-dependence of malocclusions in the deciduous and early mixed dentition. The developmental tendencies of specific malocclusions were investigated from the aspect of orthodontic prevention. The collective comprised 8,864 preschool and school-aged children, of whom 1,225 were in the deciduous dentition (mean age 4.5 years) and 7,639 in the mixed dentition (mean age 8.9 years). The orthodontic data were clinically assessed as sagittal, transversal, or vertical single-arch and occlusal findings. In addition, the malocclusions were classified according to their primary symptoms. Early infantile habits, tongue dysfunctions, speech defects and incompetent lip closure were registered separately. 57% of the children were found to have malocclusions, with the frequency rising statistically significantly in dependence on age from the deciduous to the mixed dentition (p < or = 0.001). The mean extent of excessive overjet increased significantly from the deciduous to the mixed dentition. Crossbite with mandibular midline discrepancies were observed significantly more frequently in the deciduous dentition. Although the frequency of anterior open bite underwent a significant decline from the deciduous to the mixed dentition, open bite was the malocclusion most frequently associated with dysfunction in both groups. The significant increase in traumatic deep bite in the mixed dentition indicates an unfavorable developmental tendency in this anomaly until after the eruption of the permanent incisors. The need for preventive orthodontic therapy and for the intensified application of interceptive and early treatment measures is stressed in view of the high number of malalignments and malocclusions in the deciduous and mixed dentition and the tendency for some forms of malocclusion to deteriorate as the dentition develops.

Prevalence of malocclusion among mouth breathing children: do expectations meet reality?

PubMed

Souki, Bernardo Q; Pimenta, Giovana B; Souki, Marcelo Q; Franco, Leticia P; Becker, Helena M G; Pinto, Jorge A

2009-05-01

The aim of this study was to report epidemiological data on the prevalence of malocclusion among a group of children, consecutively admitted at a referral mouth breathing otorhinolaryngological (ENT) center. We assessed the association between the severity of the obstruction by adenoids/tonsils hyperplasia or the presence of allergic rhinitis and the prevalence of class II malocclusion, anterior open bite and posterior crossbite. Cross-sectional, descriptive study, carried out at an Outpatient Clinic for Mouth-Breathers. Dental inter-arch relationship and nasal obstructive variables were diagnosed and the appropriate cross-tabulations were done. Four hundred and one patients were included. Mean age was 6 years and 6 months (S.D.: 2 years and 7 months), ranging from 2 to 12 years. All subjects were evaluated by otorhinolaryngologists to confirm mouth breathing. Adenoid/tonsil obstruction was detected in 71.8% of this sample, regardless of the presence of rhinitis. Allergic rhinitis alone was found in 18.7% of the children. Non-obstructive mouth breathing was diagnosed in 9.5% of this sample. Posterior crossbite was detected in almost 30% of the children during primary and mixed dentitions and 48% in permanent dentition. During mixed and permanent dentitions, anterior open bite and class II malocclusion were highly prevalent. More than 50% of the mouth breathing children carried a normal inter-arch relationship in the sagital, transversal and vertical planes. Univariate analysis showed no significant association between the type of the obstruction (adenoids/tonsils obstructive hyperplasia or the presence of allergic rhinitis) and malocclusions (class II, anterior open bite and posterior crossbite). The prevalence of posterior crossbite is higher in mouth breathing children than in the general population. During mixed and permanent dentitions, anterior open bite and class II malocclusion were more likely to be present in mouth breathers. Although more children showed these malocclusions, most mouth breathing children evaluated in this study did not match the expected "mouth breathing dental stereotype". In this population of mouth breathing children, the obstructive size of adenoids or tonsils and the presence of rhinitis were not risk factors to the development of class II malocclusion, anterior open bite or posterior crossbite.

Suspended circummandibular wire fixation for mixed-dentition pediatric mandible fractures.

PubMed

Nishioka, G J; Larrabee, W F; Murakami, C S; Renner, G J

1997-07-01

To introduce and evaluate the technique of cirummandibular wires with piriform rim suspension (CMW-PRS) combined with arch bars and a fracture site bridle in the treatment of mixed-dentition pediatric mandible fractures. Five male patients (mean age, 8.2 years [age range, 7-10 years]) with an isolated mixed-dentition mandible fracture were treated with the CMW-PRS technique at the University of Texas Health Science Center, San Antonio, from 1985 to 1987 and at the University of Missouri, Columbia, from 1992 to 1995. Clinical and radiographic fracture healing, somatosensory status, and complications were evaluated. All patients demonstrated clinical union to their preinjury occlusion by 3 or 4 weeks. They remained without complications until they were no longer available for follow-up. Panoramic radiographs supported the findings of clinical examinations throughout the study, and no radiographic abnormalities were found. There were no somatosensory disturbances of the lingual or mental/inferior alveolar nerves. One patient required a tracheostomy unrelated to the procedure. The CMW-PRS technique combined with arch bars and a fracture site bridle wire achieved equivalent historical results when compared with the dental splint. The potential advantages and disadvantages of the CMW-PRS technique compared with those of monocortical bone plating, as well as the significant advantages of the CMW-PRS over the dental splint, are discussed in the text.

Dental arch dimensional changes after adenoidectomy or tonsillectomy in children with airway obstruction: A meta-analysis and systematic review under PRISMA guidelines.

PubMed

Zhu, Yanfei; Li, Jiaying; Tang, Yanmei; Wang, Xiaoling; Xue, Xiaochen; Sun, Huijun; Nie, Ping; Qu, Xinhua; Zhu, Min

2016-09-01

Children with severe airway obstruction tend to have a vertical direction of growth, class II malocclusion, and narrow arches. Adenoidectomy and tonsillectomy were recommended for the promotion of balanced dentition growth in these children.The aim of this study was to determine the effect of adenoidectomy and tonsillectomy on the growth of dental morphology in children with airway obstruction. A comprehensive search of the Medline, Embase, Web of science, and OVID databases for studies published through to January 17, 2016 was conducted. Prospective, comparative, clinical studies assessing the efficacy of adenoidectomy, or tonsillectomy in children with airway obstruction were included. The weighted mean difference (WMD) and 95% confidence interval (CI) were used for continuous variables. Forest plots were drawn to demonstrate effects in the meta-analyses. Eight papers were included in our study. We found that adenoidectomy and tonsillectomy led to a significant change in nasal-breathing in children with airway obstruction. Children with airway obstruction had a significantly narrower posterior maxillary dental arch than children without airway obstruction (WMD = -0.94, 95% CI [-1.13, -0.76]; P < 0.001). After surgery, these children still had a significantly narrower dental arch than the nasal-breathing children (WMD = -0.60, 95% CI [-0.79, -0.42]; P < 0.001). In terms of dental arch width, malocclusion, palatal height, overjet, overbite, dental arch perimeter, and arch length, a tendency toward normalization was evident following adenoidectomy or tonsillectomy, with no significant differences evident between the surgical group and the normal group. The small number of studies and lack of randomized controlled trials were the main limitations of this meta-analysis. Following adenoidectomy and tonsillectomy, the malocclusion and narrow arch width of children with airway obstruction could not be completely reversed. Therefore, other treatments such as functional training or orthodontic maxillary widening should be considered after removing the obstruction in the airway.

Analysis of the dentoalveolar effects of slow and rapid maxillary expansion in complete bilateral cleft lip and palate patients: a randomized clinical trial.

PubMed

de Medeiros Alves, Arthur César; Garib, Daniela Gamba; Janson, Guilherme; de Almeida, Araci Malagodi; Calil, Louise Resti

2016-09-01

The purpose of this study was to compare the dentoalveolar effects of slow (SME) and rapid (RME) maxillary expansions in patients with complete bilateral cleft lip and palate (BCLP). A sample of 50 patients with BCLP and maxillary arch constriction was randomly and equally allocated into two groups. Group SME comprised patients (mean age of 8.8 years) treated with quad-helix appliance. Group RME comprised individuals (mean age of 8.9 years) treated with Hyrax expander. Digital dental models obtained immediately pre-expansion (T1) and 6 months after the active expansion period (T2) were used for measuring maxillary dental arch widths, arch perimeter, arch length, palatal depth, buccolingual inclination of posterior teeth and differential amount of expansion accomplished at the canine and molar regions. Inter-phase and intergroup comparisons were performed using paired t tests and t tests, respectively (p < 0.05). SME and RME caused significant increase of arch widths and arch perimeter. Arch length and palatal depth decreased nonsignificantly with SME but significantly with RME. Buccal tooth inclination was significant only for maxillary deciduous canines in both groups. The quad-helix appliance showed a significant differential expansion between anterior and posterior regions. No differences were observed between SME and RME for all variables. Differences were not found between the dentoalveolar effects of SME and RME in patients with BCLP. SME demanded a greater therapy time compared to RME. Both expansion procedures can be similarly indicated to correct maxillary arch constriction in patients with BCLP in the mixed dentition.

Targeted traction of impacted teeth with C-tube miniplates.

PubMed

Chung, Kyu-Rhim; Kim, Yong; Ahn, Hyo-Won; Lee, Dongjoo; Yang, Dong-Min; Kim, Seong-Hun; Nelson, Gerald

2014-09-01

Orthodontic traction of impacted teeth has typically been performed using full fixed appliance as anchorage against the traction force. This conventional approach can be difficult to apply in the mixed dentition if the partial fixed appliance offers an insufficient anchor unit. In addition, full fixed appliance can induce unwanted movement of adjacent teeth. This clinical report presents 3 cases where impacted teeth were recovered in the mixed or transitional dentition with skeletal anchorage on the opposite arch without full fixed appliance. Instead, intermaxillary traction was used to bring the impacted teeth into position. With this approach, side effects on teeth and periodontal tissues adjacent to the impaction were minimized.

Class III malocclusion treated with distalization of the mandibular dentition with miniscrew anchorage: A 2-year follow-up.

PubMed

Chen, Kun; Cao, Yang

2015-12-01

This case report describes the orthodontic camouflage treatment for a 16-year-old Chinese girl with a Class III malocclusion. The treatment included extractions of the mandibular second molars, fixed appliance therapy, and miniscrew-aided mandibular arch distalization. Pretreatment, posttreatment, and 2-year follow-up records are shown. The anterior negative overjet and the Class III molar and canine relationships were corrected. The patient's facial profile was greatly improved. The mandibular third molars erupted into the second molar spaces, with acceptable intercuspation with the maxillary dentition. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Fixed orthodontic appliances in the management of severe dental trauma in mixed dentition: a case report.

PubMed

Ebrahim, Fouad-Hassan; Kulkarni, Gajanan

2013-01-01

We describe a case of complex trauma to the early mixed dentition in which tooth avulsion, intrusion, extrusion and lateral luxation were managed effectively using a fixed, non-rigid orthodontic splint after treatment with a traditional wire-composite splint had failed. The use of orthodontic brackets and flexible wires provided several advantages, such as the ability to splint severely malpositioned teeth; easy assessment without removing the splint; slow, gentle repositioning of traumatized teeth; and gradual reestablishment of the arch form allowing for ease of future prosthodontic rehabilitation. Therefore, orthodontic appliances should be considered as a viable option for managing complex dental trauma.

Association between breastfeeding duration, non-nutritive sucking habits and dental arch dimensions in deciduous dentition: a cross-sectional study.

PubMed

Agarwal, Shiv Shankar; Nehra, Karan; Sharma, Mohit; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar

2014-10-31

This cross-sectional retrospective study was conducted to determine association between breastfeeding duration, non-nutritive sucking habits, dental arch transverse diameters, posterior crossbite and anterior open bite in deciduous dentition. 415 children (228 males and 187 females), 4 to 6 years old, from a mixed Indian population were clinically examined. Based on written questionnaire answered by parents, children were divided into two groups: group 1 (breastfed for <6 months (n = 158)) and group 2 (breastfed for ≥6 months (n = 257)). The associations were analysed using chi-square test (P < 0.05 taken as statistically significant). Odds ratio (OR) was calculated to determine the strength of associations tested. Multivariate logistic regression analysis was done for obtaining independent predictors of posterior crossbite and maxillary and mandibular IMD (Inter-molar distance) and ICD (Inter-canine distance). Non-nutritive sucking (NNS) was present in 15.18% children (20.3% in group 1 as compared to 12.1% in group 2 (P = 0.024)). The average ICD and IMD in maxilla and average IMD in mandible were significantly higher among group 2 as compared to group 1 (P < 0.01). In mandible, average ICD did not differ significantly between the two groups (P = 0.342). The distribution of anterior open bite did not differ significantly between the two groups (P = 0.865). The distribution of posterior crossbite was significantly different between the two groups (P = 0.001). OR assessment (OR = 1.852) revealed that group 1 had almost twofold higher prevalence of NNS habits than group 2. Multivariate logistic regression analysis revealed that the first group had independently fourfold increased risk of developing crossbite compared to the second group (OR = 4.3). Multivariate linear regression analysis also revealed that age and breastfeeding duration were the most significant determinants of ICD and IMD. An increased prevalence of NNS in the first group suggests that NNS is a dominant variable in the association between breastfeeding duration and reduced intra-arch transverse diameters which leads to increased prevalence of posterior crossbites as seen in our study. Mandibular inter-canine width is however unaffected due to a lowered tongue posture seen in these children.

Malunited fracture of the body and condyle of the mandible : A Case Report.

PubMed

Yeluri, Ramakrishna; Baliga, Sudhindra; Munshi, Autar Krishen

2010-07-01

Mandibular fractures are the most common facial fractures seen in hospitalized children and their incidence increases with age. Treatment options include soft diet, intermaxillary fixation with eyelet wires, arch bars, circummandibular wiring, or stents. Alternative options include open reduction and internal fixation through either an intraoral or extraoral approach. Many factors complicate the management of pediatric mixed-dentition mandibular fractures: tooth eruption, short roots, developing tooth buds and growth issues. One major factor is the inherent instability of the occlusion in the mixed deciduous-permanent tooth phase. This case report documents a child in mixed dentition period with a complication arising due to direct fixation of the fractured mandible.

Rehabilitative treatment of cleft lip and palate: experience of the Hospital for Rehabilitation of Craniofacial Anomalies - USP (HRAC-USP) - Part 2: Pediatric Dentistry and Orthodontics

PubMed Central

FREITAS, José Alberto de Souza; GARIB, Daniela Gamba; OLIVEIRA, Thais Marchini; LAURIS, Rita de Cássia Moura Carvalho; de ALMEIDA, Ana Lúcia Pompéia Fraga; NEVES, Lucimara Teixeira; TRINDADE-SUEDAM, Ivy Kiemle; YAEDÚ, Renato Yassutaka Faria; SOARES, Simone; PINTO, João Henrique Nogueira

2012-01-01

The aim of this article is to present the pediatric dentistry and orthodontic treatment protocol of rehabilitation of cleft lip and palate patients performed at the Hospital for Rehabilitation of Craniofacial Anomalies - University of São Paulo (HRAC-USP). Pediatric dentistry provides oral health information and should be able to follow the child with cleft lip and palate since the first months of life until establishment of the mixed dentition, craniofacial growth and dentition development. Orthodontic intervention starts in the mixed dentition, at 8-9 years of age, for preparing the maxillary arch for secondary bone graft procedure (SBGP). At this stage, rapid maxillary expansion is performed and a fixed palatal retainer is delivered before SBGP. When the permanent dentition is completed, comprehensive orthodontic treatment is initiated aiming tooth alignment and space closure. Maxillary permanent canines are commonly moved mesially in order to substitute absent maxillary lateral incisors. Patients with complete cleft lip and palate and poor midface growth will require orthognatic surgery for reaching adequate anteroposterior interarch relationship and good facial esthetics. PMID:22666849

Immediate periodontal bone plate changes induced by rapid maxillary expansion in the early mixed dentition: CT findings

PubMed Central

Garib, Daniela Gamba; Menezes, Maria Helena Ocké; da Silva Filho, Omar Gabriel; dos Santos, Patricia Bittencourt Dutra

2014-01-01

Objective This study aimed at evaluating buccal and lingual bone plate changes caused by rapid maxillary expansion (RME) in the mixed dentition by means of computed tomography (CT). Methods The sample comprised spiral CT exams taken from 22 mixed dentition patients from 6 to 9 years of age (mean age of 8.1 years) presenting constricted maxillary arch treated with Haas-type expanders. Patients were submitted to spiral CT scan before expansion and after the screw activation period with a 30-day interval between T1 and T2. Multiplanar reconstruction was used to measure buccal and lingual bone plate thickness and buccal bone crest level of maxillary posterior deciduous and permanent teeth. Changes induced by expansion were evaluated using paired t test (p < 0.05). Results Thickness of buccal and lingual bone plates of posterior teeth remained unchanged during the expansion period, except for deciduous second molars which showed a slight reduction in bone thickness at the distal region of its buccal aspect. Buccal bone dehiscences were not observed in the supporting teeth after expansion. Conclusion RME performed in mixed dentition did not produce immediate undesirable effects on periodontal bone tissues. PMID:25162564

Dentition phase and chronological age in relation to gingival crevicular fluid alkaline phosphatase activity in growing subjects.

PubMed

Perinetti, Giuseppe; Baccetti, Tiziano; Di Leonardo, Bruno; Di Lenarda, Roberto; Contardo, Luca

2011-11-01

Identification of skeletal maturation phases is of primary importance in terms of individual responsiveness to nearly all dentofacial orthopaedic treatments. In this regard, dentition phase and chronological age are still widely used to define the timing of and responsiveness to orthodontic treatments. Recently, gingival crevicular fluid (GCF) alkaline phosphatase (ALP) activity has been shown to be a reliable biomarker of skeletal maturation in growing subjects. Here, for the first time, circumpubertal dentition phases and chronological age were evaluated for correlations with GCF ALP activity, as a biomarker of skeletal maturation. Eighty-five healthy growing subjects (51 females, 34 males; mean age, 11.7±2.3 years) were enrolled into this double-blind, prospective, cross-sectional-design study. Samples of GCF were collected from each subject at the mesial and distal sites of both of the central incisors, at the maxillary and mandibular arches. Their dentition phases were recorded as intermediate mixed, late mixed, or permanent. GCF ALP enzymatic activity was determined spectrophotometrically. The dentition phases showed median GCF ALP activities from 42.0 to 67.5 mU/sample. Although these were slightly greater for the permanent dentition, no significant differences were seen. Also, the chronological age did not correlate significantly with GCF ALP activity, and no significant differences were seen between maxillary and mandibular sites in any of the comparisons. Assessment for treatment timing of dentofacial disharmonies in individual patients that require monitoring of their skeletal maturation phases should not rely on their circumpubertal dentition phase and chronological age. Copyright © 2011 Società Italiana di Ortodonzia SIDO. Published by Elsevier Srl. All rights reserved.

Inter-arch digital model vs. manual cast measurements: Accuracy and reliability.

PubMed

Kiviahde, Heikki; Bukovac, Lea; Jussila, Päivi; Pesonen, Paula; Sipilä, Kirsi; Raustia, Aune; Pirttiniemi, Pertti

2017-06-28

The purpose of this study was to evaluate the accuracy and reliability of inter-arch measurements using digital dental models and conventional dental casts. Thirty sets of dental casts with permanent dentition were examined. Manual measurements were done with a digital caliper directly on the dental casts, and digital measurements were made on 3D models by two independent examiners. Intra-class correlation coefficients (ICC), a paired sample t-test or Wilcoxon signed-rank test, and Bland-Altman plots were used to evaluate intra- and inter-examiner error and to determine the accuracy and reliability of the measurements. The ICC values were generally good for manual and excellent for digital measurements. The Bland-Altman plots of all the measurements showed good agreement between the manual and digital methods and excellent inter-examiner agreement using the digital method. Inter-arch occlusal measurements on digital models are accurate and reliable and are superior to manual measurements.

An indigenous method for closed reduction of pediatric mandibular parasymphysis fracture.

PubMed

Kumar, Naresh; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal

2015-01-01

Mandibular fractures in children are very rare as compared to adults due to protected anatomic features of child and less exposure to road traffic accidents. Management becomes complicated due to inherent dynamic nature, instability of mixed dentition and fear of surgery. Conservative management can be done with the help of acrylic cap splints along with circum-mandibular wiring, intermaxillary fixation with eyelet wires, arch wires or open reduction and internal fixation with bio-resorbable plates. Different methods have various pros and cons. The choice of anesthesia is also very crucial sometimes. This case report describes a new method of closed reduction with 18 gauge needle simulated as an arch bar performed under local anaesthesia.

An indigenous method for closed reduction of pediatric mandibular parasymphysis fracture

PubMed Central

Kumar, Naresh; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal

2015-01-01

Mandibular fractures in children are very rare as compared to adults due to protected anatomic features of child and less exposure to road traffic accidents. Management becomes complicated due to inherent dynamic nature, instability of mixed dentition and fear of surgery. Conservative management can be done with the help of acrylic cap splints along with circum-mandibular wiring, intermaxillary fixation with eyelet wires, arch wires or open reduction and internal fixation with bio-resorbable plates. Different methods have various pros and cons. The choice of anesthesia is also very crucial sometimes. This case report describes a new method of closed reduction with 18 gauge needle simulated as an arch bar performed under local anaesthesia. PMID:27390498

Orthodontic Intervention to Impacted and Transposed Lower Canines

PubMed Central

Kılıç, Nihat

2017-01-01

Impacted and transposed teeth cause serious difficulties in tooth eruption and movement as well as esthetic and functional outcomes. Proper treatment planning including good biomechanical control is essential in order to avoid side effects during traction and aligning of the impacted and/or transposed teeth. The purpose of the present study was to present a successfully treated female patient having transposed and impacted lower canines by means of a modified lingual arch and fixed orthodontic appliance. A female patient aged 13 years and 9 months presented to the orthodontic department with a chief compliant of bilateral spacing and missing teeth in mandibular dentition. After leveling and creating sufficient space in the mandibular arch for the canines, a modified lingual arch was cemented to the mandibular first molars. The lingual arch had two hooks extending to the distobuccal areas of the canine spaces. Elastic chains were applied between the hooks on the lingual arch and the ligatures tied to the attachments on the canine crowns. The light forces generated by elastic materials caused impacted canines to erupt and tend towards their own spaces in the dental arch. As a result, impacted and transposed lower canines were properly positioned in their spaces, and the treatment results were stable during the retention period. PMID:28540090

Oral Health Status among Children with Cerebral Palsy in Dubai, United Arab Emirates

PubMed Central

Al Hashmi, Haifa; Kowash, Mawlood; Hassan, Amar; Al Halabi, Manal

2017-01-01

Objectives: The purpose of this study was to assess the oral health status of children with cerebral palsy (CP) in Dubai, United Arab Emirates (UAE). Materials and Methods: Eighty-four CP and 125 healthy children were recruited from special needs centers and private/public schools in Dubai. A dental examination for decayed-missing-filled teeth in primary dentition (dmft)/Decayed-Missing-Filled teeth in permanent dentition (DMFT) indices, simplified oral hygiene index, calculus index (CI), and oral debris index was conducted. In addition, assessments of occlusal, dentofacial, soft tissue anomalies and erosion were conducted. Statistical analysis was conducted using SPSS for Windows, version 20.0 (SPSS Inc., Chicago, IL, USA). Results: DMFT/dmft scores were comparable in both groups. CI was significantly higher among children with CP. CP patients had a significantly higher proportion of anterior open bite, anterior spacing, Class II molar Angle malocclusion, trauma, high-arched palate, tongue thrust, lymphadenopathy, angular cheilitis, macroglossia, drooling, and erosion as compared to controls. Conclusions: The study highlighted peculiar characteristics and needs for the CP patients in Dubai, UAE. PMID:29285470

On occlusal forces in dentitions with implant-supported fixed cantilever prostheses.

PubMed

Falk, H

1990-01-01

The main aims of this thesis were (1) to study the functional characteristics of dentitions with mandibular implant-supported fixed cantilever prostheses - IFCP s- occluding with complete dentures, (2) to study in detail the magnitudes and distributions of axially directed closing and chewing forces in such dentitions, (3) to study the influence of number and distribution of occlusal contacts on the magnitude and distribution of closing and chewing forces, (4) to assess the vertical bending moment and the resulting vertical bending stress in the cantilever joints and (5) to find out whether the force distribution over the cantilever beams and the resulting vertical bending stress in the cantilever joint are influenced by the type of prosthetic construction in the opposing jaw. Closing and chewing forces were registered in altogether seventeen subjects by means of miniature strain gauge transducers mounted bilaterally and symmetrically in performed matrices in prosthetic appliances. Four, six or eight transducers, evenly distributed over the tooth-arch, permitted registrations of axially directed occlusal forces in several occluding areas simultaneously. In Papers I-IV, the implant-supported prostheses were installed in the mandible and occluded with complete dentures. In Paper V, group A, the fixture-supported prostheses were installed in the maxilla and occluded with tooth-supported fixed partial dentures whereas in group B, the arrangements were analogous to those in Papers I-IV. All subjects exhibited a rhythmic chewing pattern and preferred one side for chewing although both sides were used. Most chewing sequences were terminated with swallowing with occlusal force development. The mean total forces acting over the tooth-arch varied somewhat between groups and occlusal arrangements but averaged 350 and 170 N for closing and chewing respectively. Closing and chewing forces increased distally along the cantilever beams when occluding with complete dentures and decreased distally when occluding with fixed partial dentures. The distally increasing force distribution pattern could be altered to a distally decreasing force distribution pattern by infraoccluding the second cantilever unit by as little as 100 microns. Calculated vertical bending moments and stresses in the cantilever joints of the preferred chewing sides created by closing and chewing forces were larger in dentitions where the IFCP occluded with a complete denture than in dentitions where the IFCP occluded with a tooth-supported fixed partial denture.

Slow versus rapid maxillary expansion in bilateral cleft lip and palate: a CBCT randomized clinical trial.

PubMed

de Almeida, Araci Malagodi; Ozawa, Terumi Okada; Alves, Arthur César de Medeiros; Janson, Guilherme; Lauris, José Roberto Pereira; Ioshida, Marilia Sayako Yatabe; Garib, Daniela Gamba

2017-06-01

The purpose of this "two-arm parallel" trial was to compare the orthopedic, dental, and alveolar bone plate changes of slow (SME) and rapid (RME) maxillary expansions in patients with complete bilateral cleft lip and palate (BCLP). Forty-six patients with BCLP and maxillary arch constriction in the late mixed dentition were randomly and equally allocated into two groups. Computer-generated randomization was used. Allocation was concealed with sequentially, numbered, sealed, opaque envelopes. The SME and RME groups comprised patients treated with quad-helix and Haas/Hyrax-type expanders, respectively. Cone-beam computed tomography (CBCT) exams were performed before expansion and 4 to 6 months post-expansion. Nasal cavity width, maxillary width, alveolar crest width, arch width, palatal cleft width, inclination of posterior teeth, alveolar crest level, and buccal and lingual bone plate thickness were assessed. Blinding was applicable for outcome assessment only. Interphase and intergroup comparisons were performed using paired t tests and t tests, respectively (p < 0.05). SME and RME similarly promoted significant increase in all the maxillary transverse dimensions at molar and premolar regions with a decreasing expanding effect from the dental arch to the nasal cavity. Palatal cleft width had a significant increase in both groups. Significant buccal inclination of posterior teeth was only observed for RME. Additionally, both expansion procedures promoted a slight reduction of the alveolar crest level and the buccal bone plate thickness. No difference was found between the orthopedic, dental, and alveolar bone plate changes of SME and RME in children with BCLP. Both appliances produced significant skeletal transverse gains with negligible periodontal bone changes. Treatment time for SME, however, was longer than the observed for RME. SME and RME can be similarly indicated to correct maxillary arch constriction in patients with BCLP in the mixed dentition.

Biting and chewing in overdentures, full dentures, and natural dentitions.

PubMed

Fontijn-Tekamp, F A; Slagter, A P; Van Der Bilt, A; Van 'T Hof, M A; Witter, D J; Kalk, W; Jansen, J A

2000-07-01

It has been suggested that the provision of dental implants can improve the oral function of subjects with severely resorbed mandibles, possibly restoring function to the level experienced by satisfied wearers of conventional complete dentures. Nevertheless, a quantitative comparison has never been made and can be drawn from the literature only with difficulty, since studies differ greatly in methodology. To make such a comparison, we measured bite force and chewing efficiency by using identical methods in subjects with overdentures, complete full dentures, and natural dentitions. Our results indicated that bite forces achieved with overdentures on dental implants were between those achieved with artificial and natural dentitions. Chewing efficiency was significantly greater than that of subjects with full dentures (low mandible), but was still lower than that of subjects with full dentures (high mandible) and overdentures on bare roots. Differences in the height of the mandible revealed significant differences in chewing efficiency between the two full-denture groups. Furthermore, subjects with a shortened dental arch exerted bite forces similar to those of subjects with a complete-natural dentition, but their chewing efficiency was limited due to the reduced occlusal area. For all groups combined, a significant correlation was found between maximum bite force and chewing efficiency. Nearly half of the variation in chewing efficiency was explained by bite force alone.

Conservative multidisciplinary treatment approach in an unusual odontodysplasia.

PubMed

Melamed, Y; Harnik, J; Becker, A; Shapira, J

1994-01-01

An unusual case of odontodysplasia is presented, involving both primary and permanent dentition, with oligodontia of permanent teeth and hypoplasia, taurodontism and incomplete eruption of a first permanent molar. In order to improve the patient's appearance, occlusion and function, his intra- and inter-arch relationships were altered. To accomplish this, a multidisciplinary treatment approach was adopted, involving restorative and prosthetic treatments by a pediatric dentist, accompanied by periodontal surgery, endodontics and orthodontics.

European college of orthodontics: commission of affiliation and titularisation.

PubMed

Muller, Christine

2012-06-01

Date of birth: 28/4/1977; sex: female. A. (4/2006; 29 years). Tooth-arch discrepancy with bi-maxillary protrusion. Correction of bi-maxillary protrusion; avulsion of 15, 25, 35 and 45; fixed multi-bracket Incognito bi-maxillary appliance; mini-screw anchorage. B. POST-TREATMENT RECORDS DOCUMENTS: (9/2009; 32 years and 6 months). Permanent retainers using fixed upper and lower bonded wires. C. POST-RETENTION RECORDS: (7/2010; 33 years and 3 months). D. Reason for consultation: correction of crooked and "jutting" teeth. Extraoral examination: balanced facial levels; lateral view: predominant lower third; closed nasolabial angle; labial asymmetry with predominant lower lips. Endooral examination: young adult dentition; average dental status; large number of fillings; panorex confirms four devitalized teeth; good periodontal status; V-shaped upper arch with lingually ectopic 12 and 22; lower arch with slight incisor crowding; bi-lateral molar and canine Class I; crossbite of 12 and 22; 2-mm deepbite and 1-mm overjet. Copyright © 2012. Published by Elsevier Masson SAS.

Denture reconstruction of the edentulous upper jaw in cleft palate using implants--clinical report.

PubMed

Dostálová, T; Holakovský, J; Bartonová, M; Seydlová, M; Smahel, Z

2007-01-01

Early prosthodontic therapy (usually at around 18 years of age) often leads to early loss of teeth and in extreme cases to complete loss of dentition at between 40 and 50 years of age. This report describes the clinical features of two middle-aged cleft patients. Edentulous maxilla with cleft defect was treated with 6 implants supported by fixed appliance. Treatment of the whole dental arch on the basis of implants is currently frequently used as it provides a possibility of thorough functional and aesthetic therapy to a patient. The biomechanics of the reconstruction enables individual adjustment of the shape of the dental arch. The problem in cleft patients involves other diameter relations in the dental arch caused by the defect alone or also by affecting the growth of the maxillary segment by surgery. A potentially removable framework is therefore the main method of choice because the position of the implants must be prosthetically modified.

Automatic Synthesis of Panoramic Radiographs from Dental Cone Beam Computed Tomography Data.

PubMed

Luo, Ting; Shi, Changrong; Zhao, Xing; Zhao, Yunsong; Xu, Jinqiu

2016-01-01

In this paper, we propose an automatic method of synthesizing panoramic radiographs from dental cone beam computed tomography (CBCT) data for directly observing the whole dentition without the superimposition of other structures. This method consists of three major steps. First, the dental arch curve is generated from the maximum intensity projection (MIP) of 3D CBCT data. Then, based on this curve, the long axial curves of the upper and lower teeth are extracted to create a 3D panoramic curved surface describing the whole dentition. Finally, the panoramic radiograph is synthesized by developing this 3D surface. Both open-bite shaped and closed-bite shaped dental CBCT datasets were applied in this study, and the resulting images were analyzed to evaluate the effectiveness of this method. With the proposed method, a single-slice panoramic radiograph can clearly and completely show the whole dentition without the blur and superimposition of other dental structures. Moreover, thickened panoramic radiographs can also be synthesized with increased slice thickness to show more features, such as the mandibular nerve canal. One feature of the proposed method is that it is automatically performed without human intervention. Another feature of the proposed method is that it requires thinner panoramic radiographs to show the whole dentition than those produced by other existing methods, which contributes to the clarity of the anatomical structures, including the enamel, dentine and pulp. In addition, this method can rapidly process common dental CBCT data. The speed and image quality of this method make it an attractive option for observing the whole dentition in a clinical setting.

Occurrence of dental caries in primary and permanent dentition, oral health status and treatment needs among 12-15 year old school children of Jorpati VDC, Kathmandu.

PubMed

Shrestha, N; Acharya, J; Sagtani, A R; Shrestha, R; Shrestha, S

2014-12-01

Dental caries occurrence, distribution, oral health status and corresponding treatment needs in 12 - 15 year old children are useful tools for evaluation of oral health. Dental caries status along with its treatment needs was recorded according to World Health Organization (WHO) index (1997) in 366 children from five schools within Jorpati Village Development Committee (VDC), Kathmandu. Dental caries was diagnosed in 156 (42.6%) children, out of which 122 (78.21%) had caries in permanent teeth, 26 (16.67%) had caries in primary teeth, and 8 (5.13%) had caries in both dentition. The age wise distribution of dental caries showed the highest prevalence among 12 year old students (23.8%) and the lowest among 15 year olds (3.8%). Among the female students (177), 43.5% showed presence of dental caries, while the prevalence among male students (179) was 41.8%.Out of the total number of teeth affected by dental caries (336), 273 (81.25%) were permanent teeth and 63 (18.75%) were primary teeth. The intra arch distribution of dental caries in permanent as well as primary dentition was statistically significant (P < 0.05). Restorative treatment (89.38%) was the main need in permanent dentition, and endodontic treatment (60.32%) in primary dentition. Chronologic enamel hypoplasia was found in 14 (3.83%) of the total population, and 62 (16.94%) required oral prophylaxis. These findings are significant as they can initiate further research in this area, which may help establish reliable baseline data for implementation of preventive oral health programs.

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures

PubMed Central

Creugers, N. H. J.; Witter, D. J.; Van 't Spijker, A.; Gerritsen, A. E.; Kreulen, C. M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches without extension (n = 74) and with subjects who had worn a mandibular extension removable partial denture in the past (n = 19). Subjects with complete dentitions (n = 72) were controls. Data were collected at baseline and at 3-, 6-, and 9-year observations. Results. Occlusal activity in terms of reported awareness of bruxism and occlusal tooth wear of lower anterior teeth did not differ significantly between the groups. In contrast, occlusal tooth wear of premolars in shortened dental arches with or without extension dentures was significantly higher than in the controls. Differences amongst groups with respect to signs and symptoms related to temporomandibular disorders were not found. Occlusal support of the dentures did not influence anterior spatial relationship. Occlusal contacts of the denture teeth decreased from 70% for second premolars via 50% for first molars, to 30% for second molars. Conclusions. Mandibular distal extension removable partial dentures in moderate shortened dental arches had no effects on occlusion and temporomandibular function. PMID:20671961

Influence of functional dentition on satisfaction with oral health and impacts on daily performance among Brazilian adults: a population-based cross-sectional study.

PubMed

Chalub, Loliza Luiz Figueiredo Houri; Ferreira, Raquel Conceição; Vargas, Andréa Maria Duarte

2017-07-11

Dental esthetics, chewing and speech should be preserved in a dentition denominated functional and are closely related to satisfaction with oral health (SOH), impacts caused by oral problems and have a possible association with Oral Health-Related Quality of Life. Thus, the purpose of the present study was to investigate the influence of different concepts of functional dentition (FD) on both SOH and impacts on daily performance (IDP) among Brazilian adults. A cross-sectional study was conducted with 9564 adults (35-44 years). SOH and IDP were evaluated using the Oral Impacts on Daily Performance (OIDP) questionnaire. FD was considered based on four different definitions: I-classification of the World Health Organization (FDWHO = ≥20 teeth); II-well-distributed teeth (WDT = ≥10 teeth in each arch); III-classified by esthetics and occlusion (FD Class5  = sequential presence of one tooth in each arch, ≥10 teeth in each arch, 12 anterior teeth, ≥three posterior occluding pairs [POPs] of premolars and ≥one POP molar bilaterally); and IV-classified by esthetics, occlusion and periodontal status (FD Class6  = FD Class5 plus all sextants with CPI ≤ 3 and/or CAL ≤ 1). The proportion of adults satisfied with oral health and without overall impact (OIDP = 0) was calculated for each definition of FD. Multiple Poisson regression models were adjusted by demographic-socioeconomic characteristics, self-reported oral problems and the use of dental services for each dependent variable. When FD Class5 and FD Class6 were considered a greater proportion of adults reported being satisfied (52.1 and 53.1%, respectively) and have OIDP = 0 (52.4 and 53.3, respectively). In the multiple models, SOH was associated with FD Class5 (RP = 1.21) and FD Class6 (RP = 1.24) and OIDP = 0 was associated with WDT (RP = 1.14) and FD Class6 (RP = 1.21). The greater influence of WDT, FD Class5 and FD Class6 on aspects related to quality of life in comparison to FDWHO demonstrates the need for the establishment of a broader definition of FD that encompasses subjective aspects.

Correlation between the frequency of eruption disorders for first permanent molars and the occurrence of malocclusions in early mixed dentition.

PubMed

Salbach, Anja; Schremmer, Britt; Grabowski, Rosemarie; Stahl de Castrillon, Franka

2012-08-01

We analyzed the incidence of eruption disorders in 6-year molars during the first phase of mixed dentition, and then determined the risks for later dental arch development according to specific combinations of orthodontic malocclusions. We, thus, aimed to derive potential conclusions for preventative orthodontics. In this cross-sectional study, 8,041 kindergarten and school children with early mixed dentition were randomly selected and clinically examined. Examinations were performed in two consecutive years during the standard dental screening that school children undergo. The average age was 6.9 years. We defined an eruption of the 6-year molars as being disturbed when (1) the distal cusps had erupted further than the mesial cusps, (2) the mesial inclination of the occlusal surface revealed disturbed eruption, and (3) the 6-year molar had erupted below the second primary molar. Disturbed eruption of the first permanent molars was observed in 102 of these children. The upper 6-year molars were affected more often (88.5%) than the lower molars. Bilateral disturbed eruption of the upper molars was the most frequent combination of symptoms found. Although disturbed eruption was diagnosed most often in 6- and 7-year-old children, the 8-year-old children presented 20% of the eruption disorders. Moreover, 72.6% of the children with disturbed eruption presented at least one additional orthodontic malocclusion. Crowding (p ≤ 0.001), lateral malocclusions (p ≤ 0.001), and mandibular prognathism (p = 0.009) were present significantly more often in children with disturbed eruption of 6-year molars. Delayed eruption and false direction of eruption of the upper 6-year molars may-already at an early stage-raise the likelihood of problems during later dental arch development, such as crowding in the sagittal and transverse directions or Class III developments.

Rapid Palatal Expansion in the absence of posterior cross-bite to intercept maxillary incisor crowding in the mixed dentition: a CBCT evaluation of spontaneous changes of untouched permanent molars.

PubMed

Rosa, M; Lucchi, P; Manti, G; Caprioglio, A

2016-12-01

The aim of this study was to investigate the reaction of untouched permanent molars following RPE, anchored on deciduous teeth in the early mixed dentition, aimed to solve maxillary anterior crowding in the absence of posterior cross-bite. A prospective clinical trial comprised 35 consecutive patients (20 males and 15 females) treated by the same orthodontist (MR). All patients showed crowding of the upper permanent incisors in the early mixed dentition in the absence of posterior cross-bite. RPE was anchored on second deciduous molars and on the deciduous canines. CBCT was taken before and after the removal of the RPE appliance. The transverse linear changes in width and the variation in the torque of the permanent molars were measured in the coronal plane. Relief of incisor crowding was found in all patients. The transverse width between permanent molars increased significantly. The apices of the upper permanent molars spontaneously expanded more than the crowns, while the opposite happened on the lower permanent molars. Moreover, the untouched upper permanent molars spontaneously uprighted palatally, while the lower permanent molars spontaneously uprighted buccally. The variation in the torque of the permanent molars mirrored transverse normal growth. In the early mixed dentition and in the absence of posterior cross-bite, it is possible to expand transversally the palate while uprighting the upper permanent molars in the opposite direction. RPE anchored on the deciduous teeth in the early mixed dentition, in the absence of posterior cross-bite, provides an "anticipation of transverse growth" and could be indicated to expand the anterior portion of the maxillary arch perimeter to solve upper incisor crowding.

Early functional, esthetic, and psychological rehabilitation of preschool child with nonsyndromic oligodontia and anodontia in mixed dentition stage through conservative systematic approach: A case report with 5-year follow-up.

PubMed

Rathee, Manu; Malik, Poonam; Dua, Madhuri; Yadav, Vikas

2016-01-01

Missing teeth are a common developmental abnormality in humans. It may manifest as absence of varying numbers of primary and/or secondary teeth. Early treatment and follow-up are the key to successful rehabilitation of young patients with congenitally missing teeth. It is critical that oral rehabilitation is started early to maintain and correct the oral functions. Mucosa borne removable prostheses are the commonly selected treatment options for the young patients who present with oligodontia or anodontia. This clinical report describes esthetic, functional, and psychological rehabilitation of a young boy with severe oligodontia in maxillary arch and anodontia in mandibular arch. The individualized conservative graded approach in prosthetic rehabilitation with removable acrylic prosthesis helped to achieve esthetics, functionality, and psychological benefits.

Difference between manual and digital measurements of dental arches of orthodontic patients.

PubMed

Jiménez-Gayosso, Sandra Isabel; Lara-Carrillo, Edith; López-González, Saraí; Medina-Solís, Carlo Eduardo; Scougall-Vilchis, Rogelio José; Hernández-Martínez, César Tadeo; Colomé-Ruiz, Gabriel Eduardo; Escoffié-Ramirez, Mauricio

2018-06-01

The objective of this study was to compare the differences between the measurements performed manually to those obtained using a digital model scanner of patients with orthodontic treatment.A cross-sectional study was performed in a sample of 30 study models from patients with permanent dentition who attended a university clinic between January 2010 and December 2015. For the digital measurement, a Maestro 3D Ortho Studio scanner (Italy) was used and Mitutoyo electronic Vernier calipers (Kawasaki, Japan) were used for manual measurement. The outcome variables were the measurements for maxillary intercanine width, mandibular intercanine width, maxillary intermolar width, mandibular intermolar width, overjet, overbite, maxillary arch perimeter, mandibular arch perimeter, and palate height. The independent variables, besides age and sex, were a series of arc characteristics. The Student t test, paired Student t test, and Pearson correlation in SPSS version 19 were used for the analysis.Of the models, 60% were from women. Two of nine measurements for pre-treatment and 6 of 9 measurements for post-treatment showed a difference. The variables that were different between the manual and digital measurements in the pre-treatment were maxillary intermolar width and palate height (P < .05). Post-treatment, differences were found in mandibular intercanine width, palate height, overjet, overbite, and maxillary and mandibular arch perimeter (P < .05).The models measured manually and digitally showed certain similarities for both vertical and transverse measurements. There are many advantages offered to the orthodontist, such as easy storage; savings in time and space; facilitating the reproducibility of information; and conferring the security of not deteriorating over time. Its main disadvantage is the cost.

Analysis of Biomechanical Effects of Different Sites and Modes of Orthodontic Loading On Arch Expansion in a Preadolescent Mandible: An FEA Study.

PubMed

Haresh, Ajmera Deepal; Pradeep, Singh; Song, Jinlin; Wang, Chao; Fan, Yubo

2018-05-11

The aim of commencing treatment in younger age is to rectify the developing dento-alveolar, skeletal and muscular imbalances. With growing dependence on arch development and expansion, the pendulum is oscillating more towards the non-extraction treatment lately, in resolving constriction and crowding issues. Since, a limited number of attempts have been made for mandibular expansion, this study aimes to evaluate the effect of different modes and sites of loading on the expansion of preadolescent mandible using biomechanics. To address the research purpose, a total of 9 Finite Element models were simulated. Biomechanical response of the mandibular bone and dentition was analyzed under different loading conditions including site and mode, using the simulated FE models. The values of displacement envisaged by the FE models, predict hybrid mode to offer substantial expansion of the mandibular bone as compared to tooth borne and bone borne. In addition, biomechanical effect of site II on mandibular expansion in terms of displacement on X-axis, was significant. In conclusion, the results of our study suggest hybrid mode at site II to be better option for true bony expansion in preadolescent mandible.

[Investigation into the actual condition of patients with occlusal disharmony at the Pedodontic Clinic of Kyushu University. Cases of anterior cross-bite in the deciduous dentition].

PubMed

Yamasaki, K; Hirota, K; Yamasaki, Y; Nonaka, K; Nakata, M

1989-01-01

The total number of subjects was 2754 children (1354 boys and 1402 girls), who visited the Pedodontic Clinic of Kyushu University during the 5 year period from April 1st 1981 to March 31st 1986. We investigated the actual conditions of patients who complained of occlusal disharmony and who were ascertained to be associated with occlusal disharmony. The results were as follows: 1. The percentage ratio of patients with chief complaints concerning occlusions was 14.5% and the percentage of patients with various type of complaints as well as the problem of occlusion was 8.1%. The ratio of the sex of the patients who complained of their occlusal disharmony was 43.0% for boys and 57.0% for girls. 2. The age distributions of the patients who had as the chief complaint occlusal disharmony were at the ages of 3 and 6 to 7 at the maximum. 3. The number of patients who were diagnosed with occlusal disharmony at the first examination was 28.5%. These included anterior cross-bite 32.5%, edge to edge bite 14.1%, cross-bite 13.0%, crowding 11.8% and et al. 4. The distribution of anterior cross-bites due to the developmental stage was divided into the deciduous dentition 59.9%, the mixed dentition 39.3% and the permanent dentition 0.8%. 5. The sex ratios of anterior cross-bites in the deciduous dentition were 45.6% for boys and 54.4% for girls. 6. The treatment of occlusal guidance for anterior cross-bite in the deciduous dentition started from ages 3 to 5. 7. The appliances used for the treatment of anterior cross-bite in the deciduous dentition were maxillary protraction 25.0%, the chin cap 20.0%, the FKO 17.5%, and the lingual arch with herical springs 15.0% and et al. 8. The status of the patients with the anterior cross-bite in the deciduous dentition as of August 1986 was that the 36.2% was under the observation, and 24.4% was under the treatment of occlusal guidance or under the observation after the treatment was done.

Digital imaging of patterns of dental wear to diagnose bruxism in children.

PubMed

Restrepo, C; Peláez, A; Alvarez, E; Paucar, C; Abad, P

2006-07-01

The aim of this study was to evaluate and compare the area, perimeter, and form (D factor and fractal dimension) of the dental wear among bruxist and nonbruxist children with mixed dentition in order to determine if the dental wear may be used as criteria to diagnose bruxism. The children were 8 to 11 years old and were classified as bruxist or nonbruxist, according to anxiety level and temporomandibular disorders. Dental casts of the upper arch were obtained for the bruxist (n = 24) and the control (n = 29) group. The dental wear was measured in digital format and processed automatically. The complete and pathological dental wear was compared between the two groups, using the Student's t-test and Mann-Whitney test. Statistically significant differences were observed between the two groups, with a higher area, perimeter, and more irregular form of the pathological dental wear among the bruxist group. Regarding complete dental wear, differences were only significant for the D factor (an un-dimensional quantitative parameter which produces a relation between the area and the perimeter of an object). Digital imaging of dental wear may be used as criteria to diagnose bruxism in children with mixed dentition after making an analysis of the area, perimeter, and irregularity of the form of pathological dental wear.

Alleviation of mandibular anterior crowding with copper-nickel-titanium vs nickel-titanium wires: a double-blind randomized control trial.

PubMed

Pandis, Nikolaos; Polychronopoulou, Argy; Eliades, Theodore

2009-08-01

The purpose of this study was to investigate the efficiency of copper-nickel-titanium (CuNiTi) vs nickel-titanium (NiTi) archwires in resolving crowding of the anterior mandibular dentition. Sixty patients were included in this single-center, single-operator, double-blind randomized trial. All patients were bonded with the In Ovation-R self-ligating bracket (GAC, Central Islip, NY) with a 0.022-in slot, and the amount of crowding of the mandibular anterior dentition was assessed by using the irregularity index. The patients were randomly allocated into 2 groups of 30 patients, each receiving a 0.016-in CuNiTi 35 degrees C (Ormco, Glendora, Calif) or a 0.016-in NiTi (ModernArch, Wyomissing, Pa) wire. The type of wire selected for each patient was not disclosed to the provider or the patient. The date that each patient received a wire was recorded, and all patients were followed monthly for a maximum of 6 months. Demographic and clinical characteristics between the 2 wire groups were compared with the t test or the chi-square test and the Fisher exact test. Time to resolve crowding was explored with statistical methods for survival analysis, and alignment rate ratios for wire type and crowding level were calculated with Cox proportional hazards multivariate modeling. The type of wire (CuNiTi vs NiTi) had no significant effect on crowding alleviation (129.4 vs 121.4 days; hazard ratio, 1.3; P >0.05). Severe crowding (>5 on the irregularity index) showed a significantly higher probability of crowding alleviation duration relative to dental arches with a score of <5 (138.5 vs 113.1 days; hazard ratio, 2.2; P=0.02). The difference of the loading pattern of wires in laboratory and clinical conditions might effectively eliminate the laboratory-derived advantage of CuNiTi wires.

Telescopic overdenture for oral rehabilitation of ectodermal dysplasia patient.

PubMed

Gupta, Charu; Verma, Mahesh; Gupta, Rekha; Gill, Shubhra

2015-09-01

Reduced number of teeth with underdeveloped alveolar ridges poses a greatest prosthetic challenge in rehabilitation of ectodermal dysplasia patients (ED). Furthermore, surgical risks and financial constraints may preclude the implant supported prosthesis, the most desirable treatment option in an adult ED patient. Long edentulous span does not permit fixed dental prosthesis (FDP) as well. Telescopic denture by incorporating the best of both fixed and removable prosthesis can be a viable treatment alternative for ED patients with compromised dentition and limited finances. A 21-year-old young girl presented with chief complaint of esthetics and mastication due to missing upper and lower teeth. A provisional diagnosis of ED was made based on familial history, physical, and oral examination. This clinical report describes management of an adult ED patient by means of telescopic overdenture prosthesis in mandibular arch and FDP in maxillary arch which restored esthetics, function, and social confidence of the patient in a cost effective manner.

Telescopic overdenture for oral rehabilitation of ectodermal dysplasia patient

PubMed Central

Gupta, Charu; Verma, Mahesh; Gupta, Rekha; Gill, Shubhra

2015-01-01

Reduced number of teeth with underdeveloped alveolar ridges poses a greatest prosthetic challenge in rehabilitation of ectodermal dysplasia patients (ED). Furthermore, surgical risks and financial constraints may preclude the implant supported prosthesis, the most desirable treatment option in an adult ED patient. Long edentulous span does not permit fixed dental prosthesis (FDP) as well. Telescopic denture by incorporating the best of both fixed and removable prosthesis can be a viable treatment alternative for ED patients with compromised dentition and limited finances. A 21-year-old young girl presented with chief complaint of esthetics and mastication due to missing upper and lower teeth. A provisional diagnosis of ED was made based on familial history, physical, and oral examination. This clinical report describes management of an adult ED patient by means of telescopic overdenture prosthesis in mandibular arch and FDP in maxillary arch which restored esthetics, function, and social confidence of the patient in a cost effective manner. PMID:26604583

European Board of Orthodontics case report: severe skeletal discrepancy.

PubMed

Paduano, Sergio

2009-01-01

The 10.3 year-old patient presented a sagittal skeletal and dental Class II division I malocclusion with a severe overjet in the mixed dentition. The convex profile aesthetically improved with the mandibular advancement (positive Frankel manoeuvre). No signs or symptoms of TMJ disorders were present. Oral mucosa and gingiva conditions were good notwithstanding a scanty oral hygiene. The treatment plan included: a) Bass appliance to improve the retruded profile and, partially, OVJ; b) upper and lower arch fixed appliance for alignment, levelling and correction of the malocclusion c) posttreatment retention.

Alterations in plaque accumulation and gingival inflammation promoted by treatment with self-ligating and conventional orthodontic brackets

PubMed Central

Cardoso, Mauricio de Almeida; Saraiva, Patrícia Pinto; Maltagliati, Liliana Ávila; Rhoden, Fernando Kleinübing; Costa, Carla Cristina Alvarenga; Normando, David; Capelozza, Leopoldino

2015-01-01

OBJECTIVE: The aim of the present study was to evaluate, comparatively, the periodontal response during orthodontic treatment performed with self-ligating and conventional brackets. METHODS: Sixteen Caucasian individuals of both sexes, aged between 12 and 16 years old and in permanent dentition were selected. Eight individuals were treated with conventional brackets installed on the lower dental arch and self-ligating brackets on the upper arch. Another eight individuals received self-ligating brackets in the lower arch and conventional brackets in the upper arch. The subjects received material and instructions for oral hygiene. Visible plaque index (VPI), gingival bleeding index (GBI) and clinical attachment level (CAL) were evaluated just after installation of orthodontic appliances, and 30, 60 and 180 days later. Mann-Whitney test was used to compare differences between groups (self-ligating and conventional), two-way ANOVA followed by Tukey's test was used to assess CAL at each site of each tooth. Significance level was set at 5%. RESULTS: No significant changes were found with regard to the assessed parameters (VPI, GBI and CAL) in either one of the systems. CONCLUSION: No significant changes were found with regard to the periodontal response to orthodontic treatment for the variables assessed and between subjects receiving passive self-ligating and conventional brackets. All individuals had received oral hygiene instructions and had their periodontal conditions monitored. PMID:25992985

Alterations in plaque accumulation and gingival inflammation promoted by treatment with self-ligating and conventional orthodontic brackets.

PubMed

Cardoso, Mauricio de Almeida; Saraiva, Patrícia Pinto; Maltagliati, Liliana Ávila; Rhoden, Fernando Kleinübing; Costa, Carla Cristina Alvarenga; Normando, David; Capelozza Filho, Leopoldino

2015-01-01

The aim of the present study was to evaluate, comparatively, the periodontal response during orthodontic treatment performed with self-ligating and conventional brackets. Sixteen Caucasian individuals of both sexes, aged between 12 and 16 years old and in permanent dentition were selected. Eight individuals were treated with conventional brackets installed on the lower dental arch and self-ligating brackets on the upper arch. Another eight individuals received self-ligating brackets in the lower arch and conventional brackets in the upper arch. The subjects received material and instructions for oral hygiene. Visible plaque index (VPI), gingival bleeding index (GBI) and clinical attachment level (CAL) were evaluated just after installation of orthodontic appliances, and 30, 60 and 180 days later. Mann-Whitney test was used to compare differences between groups (self-ligating and conventional), two-way ANOVA followed by Tukey's test was used to assess CAL at each site of each tooth. Significance level was set at 5%. No significant changes were found with regard to the assessed parameters (VPI, GBI and CAL) in either one of the systems. No significant changes were found with regard to the periodontal response to orthodontic treatment for the variables assessed and between subjects receiving passive self-ligating and conventional brackets. All individuals had received oral hygiene instructions and had their periodontal conditions monitored.

The Ball Welding Bar: A New Solution for the Immediate Loading of Screw-Retained, Mandibular Fixed Full Arch Prostheses

PubMed Central

Bacchiocchi, Danilo

2017-01-01

Purpose To present a new intraoral welding technique, which can be used to manufacture screw-retained, mandibular fixed full-arch prostheses. Methods Over a 4-year period, all patients with complete mandibular edentulism or irreparably compromised mandibular dentition, who will restore the masticatory function with a fixed mandibular prosthesis, were considered for inclusion in this study. The “Ball Welding Bar” (BWB) technique is characterised by smooth prosthetic cylinders, interconnected by means of titanium bars which are adjustable in terms of distance from ball terminals and are inserted in the rotating rings of the cylinders. All the components are welded and self-posing. Results Forty-two patients (18 males; 24 females; mean age 64.2 ± 6.7 years) were enrolled and 210 fixtures were inserted to support 42 mandibular screw-retained, fixed full-arch prostheses. After two years of loading, 2 fixtures were lost, for an implant survival rate of 97.7%. Five implants suffered from peri-implant mucositis and 3 implants for peri-implantitis. Three of the prostheses (3/42) required repair for fracture (7.1%): the prosthetic success was 92.9%. Conclusions The BWB technique seems to represent a reliable technique for the fabrication of screw-retained mandibular fixed full-arch prostheses. This study was registered in the ISRCTN register with number ISRCTN71229338. PMID:28835752

A modified, lingually supported cantilevered Herbst appliance.

PubMed

Snodgrass, D

1996-01-01

This new, fixed-functional appliance/Herbst/Bioprogressive system is designed for patient comfort and mandatory compliance. It also combines the positive clinical effects of four fixed-functional systems. It allows rapid palatal expansion of the upper arch, alveolar uprighting of the lower arch, upper and lower incisor alignment, and sagittal correction of Class II malocclusions to occur simultaneously with one appliance fixed in both arches. It is indicated for use in growing patients with skeletal Class II malocclusions. The ideal timing for treatment is the late mixed dentition. Being able to remove the appliance after one year with the upper second bicuspids erupting slightly Class III so the clinician can immediately begin fixed finishing mechanics would be ideal. This new Herbst design will reduce the frequency of orthognathic surgery and upper bicuspid extraction to camouflage Class II malocclusions. At the same time, it gives total control to the clinician in treating some more difficult, non-compliant patients. Fixed-functional appliances, which improve treatment efficiency and treatment results and provide for patient comfort, while at the same time give the treating clinician almost total control of the three planes of facial growth will open new doors for orthodontic treatment and research in the next century.

Bite mark documentation and analysis: the forensic 3D/CAD supported photogrammetry approach.

PubMed

Thali, M J; Braun, M; Markwalder, Th H; Brueschweiler, W; Zollinger, U; Malik, Naseem J; Yen, K; Dirnhofer, R

2003-08-12

Bite mark identification is based on the individuality of a dentition, which is used to match a bite mark to a suspected perpetrator. This matching is based on a tooth-by-tooth and arch-to-arch comparison utilising parameters of size, shape and alignment. The most common method used to analyse bite mark are carried out in 2D space. That means that the 3D information is preserved only two dimensionally with distortions. This paper presents a new 3D documentation, analysis and visualisation approach based on forensic 3D/CAD supported photogrammetry (FPHG) and the use of a 3D surface scanner. Our photogrammetric approach and the used visualisation method is, to the best to our knowledge, the first 3D approach for bite mark analysis in an actual case. The documentation has no distortion artifacts as can be found with standard photography. All the data are documented with a metric 3D measurement, orientation and subsequent analysis in 3D space. Beside the metrical analysis between bite mark and cast, it is possible using our method to utilise the topographical 3D feature of each individual tooth. This means that the 3D features of the biting surfaces and edges of each teeth are respected which is--as shown in our case--very important especially in the front teeth which have the first contact to the skin. Based upon the 3D detailed representation of the cast with the 3D topographic characteristics of the teeth, the interaction with the 3D documented skin can be visualised and analysed on the computer screen.

An experimental study of arch perimeter and arch width increase with mandibular expansion: a finite element method.

PubMed

Baswaraj; Hemanth, M; Jayasudha; Patil, Chandrashekhargouda; Sunilkumar, P; Raghuveer, H P; Chandralekha, B

2013-01-01

The objective of this study was to estimate the increase in arch perimeter associated with mandibular lateral expansion, To estimate the increase in intermolar width with mandibular lateral expansion and to find out the changes of tooth inclination with mandibular expansion. The mandibular bone with dentition of indian skeletal specimen was obtained. The computer tomogram (CT) slices of the mandible were taken. Finite element model (FEM): Numerical representation of the geometry was created by dividing the geometry into finite number of elements and the elements were connected together with nodes at the junction. The result of the study showed when 10° of lateral expansion was applied to the lower buccal segment at the center of rotation found at 4.3 mm below the root apex of first molar, a space of 1.3 mm between the canine and first premolar, and thus an increase in arch perimeter of 2.6 mm. The tip of the mesiolingual cusp of the first molar moved 4.2 mm laterally, resulting in a change in intermolar width by 8.4 mm. Three-dimensional simulation showed that 1 mm of intermolar expansion increased the arch perimeter by 0.30 mm. As the finite element method evolves and scientists are able to more clearly define physical properties of biological tissues, more accurate information can be generated at the level that other analytical methods cannot fully provide data.This result would be of value clinically for prediction of the effects of mandibular expansion.

An Assessment of Curve of Spee in Healthy Human Permanent Dentitions: A Cross Sectional Analytical Study in a Group of Young Indian Population.

PubMed

Krishnamurthy, Sushma; Hallikerimath, Rajendra B; Mandroli, Praveenkumar S

2017-01-01

An awareness of the standard value of the maxillary and the mandibular curves of Spee may aid the clinician in developing occlusion in the sagittal plane and would be useful when providing prosthetic rehabilitation for patients with occlusal derangement. To assess and compare the radius and depth of curve of Spee in maxillary and mandibular arches in men and women, in a group of young Indian population. The study cohort consisted of 25 men and 25 women between 19 to 24 years. Impression of maxillary and mandibular arches were made with alginate. Casts were poured in die stone. Standardized digital pictures of the right side of maxillary and mandibular dental casts were made with a digital camera and transferred to a computer. Tips of the distal cusps of molars, premolars and canines of the maxilla and mandible were located. The radius and the depth of the curve of Spee were measured from the digital photographs of dental casts, with the help of 'dimension tool' in the computer software (Corel DRAW X5). Mann-Whitney test was used to analyze the difference in the curve of Spee between men and women and the difference between maxillary and mandibular arches. The mean values were as follows: a) Men: Radii of curve of Spee in the maxillary and mandibular arch were 140.22±65.98 and 109.67±46.80 respectively; depths of curve of Spee in maxillary and mandibular arch were 1.65±0.67 and 1.49±0.74 respectively; b) Women: Radii of curve of Spee in the maxillary and mandibular arch were 120.58±63.91 and 98.31±63.59 respectively; depths of curve of Spee in maxillary and mandibular arch were 1.45±0.54 and 1.40±0.61 respectively. In the mandibular arch, the difference in the radii (p=0.0467) was statistically significant between men and women. In women, the difference in radii (p=0.0467) between maxillary and mandibular arches was statistically significant. The radii and depths of curve of Spee were larger in maxillary than mandibular arches in both men and women. Also, the difference in the radii of mandibular arch was statistically significant between men and women.

Three-year clinical follow-up of posterior teeth restored with leucite-reinforced ips empress onlays and partial veneer crowns.

PubMed

Murgueitio, Rafael; Bernal, Guillermo

2012-07-01

The aim of this study was to analyze the survival rate and failure mode of IPS leucite-reinforced ceramic onlays and partial veneer crowns regarding thickness under the following clinical conditions: vital versus nonvital teeth, tooth location, and type of opposing dentition. Teeth were prepared according to established guidelines for ceramic onlays and partial veneer crowns. Before cementation, the restorations were measured for occlusal thickness at the central fossa, mesial, and distal marginal ridges, and functional and nonfunctional cusps. A total of 210 ceramic restorations were cemented in 99 patients within a mean observation period of 2.9 ± 1.89 years. The mode of failure was classified and evaluated as (1) adhesive, (2) cohesive, (3) combined failure, (4) decementation, (5) tooth sensitivity, and (6) pulpal necrosis. Kaplan, log-rank, and Cox regression tests were used for statistical analysis. The failure rate was 3.33% (7/210). Increased material thickness produced less probability of failures. Vital teeth were less likely to fail than nonvital teeth. Second molars were five times more susceptible to failure than first molars. Tooth sensitivity postcementation and the type of opposing dentition were not statistically significant in this study. In this study, thickness of the restorations, tooth vitality, and location of teeth in the dental arch influenced restoration failures. © 2012 by the American College of Prosthodontists.

Three-dimensional morphology of the palate in subjects with isolated cleft palate at the stage of permanent dentition.

PubMed

Smahel, Zbynek; Trefný, Pavel; Formánek, Pavel; Müllerová, Ziva; Peterka, Miroslav

2003-11-01

Three-dimensional analysis of palate size and shape in patients with isolated cleft palate at the stage of permanent dentition. Cross-sectional study using Fourier transform profilometry. Twenty-nine randomly selected dental casts of approximately 15-year-old boys with isolated cleft palate and 28 dental casts of normal boys of the same age. All patients were operated on by the same method (pushback and pharyngeal flap surgery) at a mean age of 4.5 years. Data on the palate height in 210 defined locations (pixels). The palate in isolated clefts is narrower throughout its whole extent and lower from the level of the first premolars. The difference, as compared with controls, increases in a posterior direction. At the level of the first molars, palatal height is reduced by one-quarter, the area of the transversal section by more than one-third. The shaping of the palate vault is, on average, symmetrical with a marked interindividual variability. Palatal height does not depend on the width of the dentoalveolar arch, and the height of the primary palate is not reduced. The smaller width and reduced height from the level of the first premolars posteriorly confirm the substantially reduced space available for the tongue in patients with isolated cleft palate. Deviations are on the average symmetrical, and the anterior part of the palate is not shallower.

Computer-Aided Design/Computer-Assisted Manufacture Monolithic Restorations for Severely Worn Dentition: A Case History Report.

PubMed

Abou-Ayash, Samir; Boldt, Johannes; Vuck, Alexander

Full-arch rehabilitation of patients with severe tooth wear due to parafunctional behavior is a challenge for dentists and dental technicians, especially when a highly esthetic outcome is desired. A variety of different treatment options and prosthetic materials are available for such a clinical undertaking. The ongoing progress of computer-aided design/computer-assisted manufacture technologies in combination with all-ceramic materials provides a predictable workflow for these complex cases. This case history report describes a comprehensive, step-by-step treatment protocol leading to an optimally predictable treatment outcome for an esthetically compromised patient.

A new 4-dimensional imaging system for jaw tracking.

PubMed

Lauren, Mark

2014-01-01

A non-invasive 4D imaging system that produces high resolution time-based 3D surface data has been developed to capture jaw motion. Fluorescent microspheres are brushed onto both tooth and soft-tissue areas of the upper and lower arches to be imaged. An extraoral hand-held imaging device, operated about 12 cm from the mouth, captures a time-based set of perspective image triplets of the patch areas. Each triplet, containing both upper and lower arch data, is converted to a high-resolution 3D point mesh using photogrammetry, providing the instantaneous relative jaw position. Eight 3D positions per second are captured. Using one of the 3D frames as a reference, a 4D model can be constructed to describe the incremental free body motion of the mandible. The surface data produced by this system can be registered to conventional 3D models of the dentition, allowing them to be animated. Applications include integration into prosthetic CAD and CBCT data.

Accuracy, reliability, and efficiency of intraoral scanners for full-arch impressions: a systematic review of the clinical evidence.

PubMed

Goracci, Cecilia; Franchi, Lorenzo; Vichi, Alessandro; Ferrari, Marco

2016-08-01

The interest on intraoral scanners for digital impressions has been growing and new devices are continuously introduced on the market. It is timely to verify whether the several scanners proposed for full-arch digital impressions have been tested under clinical conditions for validity, repeatability, reproducibility, as well as for time efficiency, and patient acceptance. An electronic search of the literature was conducted through PubMed, Scopus, Cochrane Library, Web of Science, and Embase, entering the query terms 'digital impression', 'intraoral digital impression', 'intraoral scanning', 'intraoral scanner', 'intraoral digital scanner', combined by the Boolean operator 'OR'. No language or time limitation was applied. Only studies where digital full-arch impressions had been recorded intraorally were considered. In only eight studies full-arch scans had been performed intraorally. Only four studies reported data on validity, repeatability, reproducibility of digital measurements and their samples were limited to subjects in complete permanent dentition. Only two intraoral scanners, Lava COS and iTero, were tested. Scanning times were measured in six studies and varied largely. Patients' acceptance of intraoral scanning was evaluated in four studies, but it was not specifically assessed for children. The scientific evidence so far collected on intraoral scanning is neither exhaustive, nor up-to-date. Data from full-arch scans performed in children should be collected. For a meaningful assessment of time efficiency, agreement should be reached on the procedural steps to be included in the computation of scanning time. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

A comparative study of the effect of the intrusion arch and straight wire mechanics on incisor root resorption: A randomized, controlled trial.

PubMed

de Almeida, Marcio Rodrigues; Marçal, Aline Siqueira Butzke; Fernandes, Thais Maria Freire; Vasconcelos, Juliana Brito; de Almeida, Renato Rodrigues; Nanda, Ravindra

2018-01-01

To analyze and compare external apical root resorption (EARR) of maxillary incisors treated by intrusion arch or continuous archwire mechanics. This cone-beam computed tomography (CBCT) study analyzed 28 deep bite patients in the permanent dentition who were randomly divided into two groups: Group 1, 12 patients with initial mean age of 15.1 ± 1.6 years and mean overbite of 4.6 ± 1.2 mm treated with the Connecticut intrusion arch (CIA) in the upper arch (Ortho Organizers, Carlsbad, Calif) for a mean period of 5.8 ± 1.27 months. Group 2, 16 patients with initial mean age of 22.1 ± 5.7 years and mean overbite of 4.1 ± 1.1 mm treated with conventional leveling and alignment using continuous archwire mechanics for 6.1 ± 0.81 months. The degree of EARR was detected in 112 maxillary incisors by using CBCT scans and a three-dimensional program (Dolphin 11.7, Dolphin Imaging & Management Solutions, Chatsworth, Calif). The CBCT scans were obtained before (T1) and 6 months after initiation of treatment (T2). Differences between and within groups were assessed by nonpaired and paired t-tests, respectively, with a 5% significance level. Significant differences were found for both groups between T1 and T2 ( P < .05) indicating that EARR occurred in both groups. However, there were no significant differences when EARR was compared between group 1 (-0.76 mm) and group 2 (-0.59 mm). The Connecticut intrusion arch did not lead to greater EARR of maxillary incisors when compared with conventional orthodontic mechanics.

Posterior Vertical Bite Reconstructions of Erosively Worn Dentitions and the "Stamp Technique" - A Case Series with a Mean Observation Time of 40 Months.

PubMed

Ramseyer, Simon T; Helbling, Christoph; Lussi, Adrian

2015-06-01

In the present case series, the authors report on seven cases of erosively worn dentitions (98 posterior teeth) which were treated with direct resin composite. In all cases, both arches were restored by using the so-called stamp technique. All patients were treated with standardized materials and protocols. Prior to treatment, a waxup was made on die-cast models to build up the loss of occlusion as well as ensure the optimal future anatomy and function of the eroded teeth to be restored. During treatment, teeth were restored by using templates of silicone (ie, two "stamps," one on the vestibular, one on the oral aspect of each tooth), which were filled with resin composite in order to transfer the planned, future restoration (ie, in the shape of the waxup) from the extra- to the intraoral situation. Baseline examinations were performed in all patients after treatment, and photographs as well as radiographs were taken. To evaluate the outcome, the modified United States Public Health Service criteria (USPHS) were used. The patients were re-assessed after a mean observation time of 40 months (40.8 ± 7.2 months). The overall outcome of the restorations was good, and almost exclusively "Alpha" scores were given. Only the marginal integrity and the anatomical form received a "Charlie" score (10.2%) in two cases. Direct resin composite restorations made with the stamp technique are a valuable treatment option for restoring erosively worn dentitions.

Prosthetic reconstruction of dentitions seriously compromised by periodontal disease.

PubMed

Lundgren, D

1991-07-01

Dentitions seriously compromised by periodontal disease are often in need not only of cause-related periodontal therapy of high quality but also of relevant prosthetic rehabilitation. Contrary to traditional claims, clinical investigations published during the last 2 decades demonstrate that, if adequately treated and controlled, such dentitions can carry fixed, cross-arch bridges on an extremely reduced amount of periodontium, with a good long-range prognosis. It has also been shown that a markedly reduced but healthy and favourably distributed periodontium supporting such constructions can withstand occlusal forces of considerable magnitude. Another controversial topic, related to fixed bridges, involves indications and contra-indications for cantilever segments. Some clinical investigations demonstrate a markedly increased risk of failure if the fixed bridge is provided with cantilever units, while other controlled studies with defined specifications on the design of the constructions exhibit a high success rate after 8 years or more also for bridgework where 2 or 3 cantilever units are included. The force pattern along cantilever segments of both tooth-supported and implant-supported bridges has been extensively studied. The results show that the force distribution depends not only on the occlusal contact pattern and the dimensioning of the cantilever beam, but also on the type of prosthetic construction in the opposite jaw occluding with the cantilever segment. The free-standing, implant-supported bridge has recently become an important treatment modality for rehabilitation of the partially edentulous jaw, and follow-up studies demonstrate a high success rate.(ABSTRACT TRUNCATED AT 250 WORDS)

Prosthetic rehabilitation in a pediatric patient with hypohidrotic ectodermal dysplasia: a case report.

PubMed

Quintanilha, Luís Eduardo Lavigne Paranhos; Carneiro-Campos, Luís Eduardo; Antunes, Lívia Azeredo Alves; Antunes, Leonardo Santos; Fernandes, Claudio Pinheiro; Abreu, Fernanda Volpe

2017-01-01

Hypohidrotic ectodermal dysplasia (HED) is a rare ectodermal disease with a systemic expression. Oral abnormalities are common and may include hypodontia and shape irregularities in the primary and permanent dentitions. Rehabilitation of the dental arches in pediatric patients with HED is a challenge because HED is a multifactorial disease that demands a complicated treatment approach and most dentists have limited experience or training in the necessary treatment. In addition, pediatric patients often lack the patience or ability to cooperate with complex prosthetic treatment. This case report describes a simplified technique used to fabricate complete dentures for a 4-year-old HED patient in 4 sessions.

Mandibular Symmetrical Bilateral Canine-Lateral Incisors Transposition: Its Early Diagnosis and Treatment Considerations.

PubMed

Shapira, Yehoshua; Finkelstein, Tamar; Kadry, Rana; Schonberger, Shirley; Shpack, Nir

2016-01-01

Bilateral mandibular tooth transposition is a relatively rare dental anomaly caused by distal migration of the mandibular lateral incisors and can be detected in the early mixed dentition by radiographic examination. Early diagnosis and interceptive intervention may reduce the risk of possible transposition between the mandibular canine and lateral incisor. This report illustrates the orthodontic management of bilateral mandibular canine-lateral incisor transposition. Correct positioning of the affected teeth was achieved on the left side while teeth on the right side were aligned in their transposed position. It demonstrates the outcome of good alignment of the teeth in the dental arch.

Biomechanical characteristics of self-ligating brackets in a vertically displaced canine model: a finite element analysis.

PubMed

Kim, S-J; Kwon, Y-H; Hwang, C-J

2016-05-01

The objective of this study was to compare the biomechanical characteristics between two types of self-ligating brackets and conventional metal brackets using finite element analysis of a vertically displaced canine model focusing on the desired force on the canine and undesirable forces on adjacent teeth. Three-dimensional finite element models of the maxillary dentition with 1-mm, 2-mm, and 3-mm vertically displaced canines were constructed. Two different self-ligating brackets (In-Ovation C and Smart clip) and a conventional metal bracket (Micro-arch) were modeled. After a 0.016-inch NiTi (0.40 mm, round) wire was engaged, the displacement of each tooth was calculated using x-, y-, and z-coordinates, and the tensile and compressive stresses were calculated. The extrusion and maximal tensile stress of the canine differed little between the three brackets, but the intrusion and minimal compressive stress values of the adjacent teeth differed considerably and were highest in the Smart clip and least in the In-Ovation C. The extrusion and maximal tensile stress of the canine in the 3-mm displacement model was less than that in the 2-mm displacement model, and the intrusion and minimal compressive stress of the adjacent teeth increased with the degree of displacement. Self-ligating brackets were not superior to conventional brackets in leveling a vertically displaced canine. A continuous arch wire may not be recommended for leveling of severely displaced canines whether using self-ligating or conventional brackets. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Regression equations for predicting the size of unerupted canines and premolars in an Iranian population: a pilot study.

PubMed

Talebi, Maryam; Parisay, Iman; Sarraf, Ali; Mazhari, Fateme

2010-10-14

The aim of this pilot study was to evaluate equations for predicting the size of unerupted canines and premolars during the mixed dentition period in an Iranian population. This cross-sectional analysis was performed on 106 subjects (52 girls, 54 boys, aged 13-15 years). Data were obtained from dental cast by making direct measurements of the maximum mesiodistal widths of all mandibular and maxillary incisors, canines, premolars, and first molars with an electronic digital sliding caliper, with an accuracy of ± 0.02 mm and repeatability of ± 0.01 mm. The results were statistically analyzed using Student t tests, Pearson product-moment coefficients, and ANOVA tests. Correlation coefficients (r) and error variance of estimates were determined using a significance level of p<0.05. No significant differences were found between the mesiodistal tooth widths of males and females in this Iranian population. The highest correlation was between the sum of the mesiodistal width of canines and premolars in the maxilla with the mesiodistal width of the mandibular first molars and maxillary central incisors (r = 0.742). A moderate correlation was obtained in the mandible (r = 0.665). Approximations were developed to predict the size of the unerupted canines and premolars in both jaws (in the maxilla, Y = 0.740X + 14.271, or the simplified formula, Y = 3/4X + 14; for the mandibular arch, Y = 0.658X + 16.353, or the simplified formula, Y = 2/3 X + 16). The strongest correlation was found for the sum of the mesiodistal width of canines and premolars in the maxilla with the mesiodistal width of the mandibular first molars and maxillary central incisors in the maxillary analysis (r = 0.742). A moderate correlation was found in the mandible for the sum of the mesiodistal width of canines and premolars with the mesiodistal width of the mandibular first molars and maxillary central incisors (r = 0.665). The simplified equations proposed for the maxillary arch (Y = 3/4 X + 14) and for the mandibular arch (Y = 2/3 X + 16) offer an easy and practical way to predict the size of unerupted canines and premolars in the maxillary and mandibular arches of Iranian children.

Confirmation of Down syndrome critical region by FISH analysis in a patient with add(21)(p11)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsumoto, Naomichi; Niikawa, Norio; Mikawa, Makoto

1995-12-04

We have studied a patient with clinical Down syndrome (DS) who has a mosaic 46, XX/46, XX, 21p+ karyotype. The patient was born at 39 weeks of gestation with a birth weight of 3,025 g to healthy parents. At age 2 months, she was diagnosed clinically to have DS; she had flat facies, upslanted palpebral fissures, epicanthal folds, telecanthus, flat nasal bridge, abnormal dentition, malformed ears, short neck, short fingers, clinodactyly with single flexion crease of the fifth fingers, hyperextension of joints, pes planus, distal axial triradii, and bilateral tibial arch patterns. Chromosome analysis showed mosaicism consisting of a normalmore » 46,XX cell line and a line with a 21p+ chromosome, the final karyotype being mos46,XX[57]/46,XX,add(21)(p11)[43]. Although the origin of an additional segment on chromosome 21 was not identified with conventional banding analyses, it was suspected to represent partial trisomy 21 on the basis of clinical manifestations. 6 refs., 2 figs.« less

Noninvasive and multidisciplinary approach to the functional and esthetic rehabilitation of amelogenesis imperfecta: a pediatric case report.

PubMed

de Souza, Juliana Feltrin; Fragelli, Camila Maria Bullio; Paschoal, Marco Aurélio Benini; Campos, Edson Alves; Cunha, Leonardo Fernandes; Losso, Estela Maris; Cordeiro, Rita de Cássia Loiola

2014-01-01

Case Report. An 8-year-old girl with amelogenesis imperfecta (AI) reported unsatisfactory aesthetics, difficulty in mastication, and dental hypersensitivity. The intraoral examination observed mixed dentition, malocclusion in anteroposterior relationships, anterior open bite, and dental asymmetry. A hypoplastic form of AI was diagnosed in the permanent dentition. A multidisciplinary planning was performed and divided into preventive, orthopedic, and rehabilitation stages. Initially, preventive treatment was implemented, with fluoride varnish applications, in order to protect the fragile enamel and reduce the dental sensitivity. In the second stage, the patient received an interceptive orthopedic treatment to improve cross-relationship of the arches during six months. Finally, the rehabilitation treatment was executed to establish the vertical dimension. In the posterior teeth, indirect composite resin crowns were performed with minimally invasive dental preparation. Direct composite resin restorations were used to improve the appearance of anterior teeth. Follow-Up. The follow-up was carried out after 3, 6, 12, and 18 months. After 18 months of follow-up, The restoration of integrity, oral hygiene, and patient satisfaction were observed . Conclusion. Successful reduction of the dental hypersensitivity and improvement of the aesthetic and functional aspects as well as quality of life were observed.

Effect of rapid maxillary expansion and transpalatal arch treatment associated with deciduous canine extraction on the eruption of palatally displaced canines: A 2-center prospective study.

PubMed

Sigler, Lauren M; Baccetti, Tiziano; McNamara, James A

2011-03-01

Our aim was to investigate the effect of rapid maxillary expansion and transpalatal arch therapy combined with deciduous canine extraction on the eruption rate of palatally displaced canines (PDCs) in patients in the late mixed dentition in a 2-center prospective study. Seventy subjects were enrolled based on PDCs diagnosed on panoramic radiographs. The treatment group (TG, 40 subjects) underwent RME followed by TPA therapy and extraction of the deciduous canines. The control group (CG, 30 subjects) received no orthodontic treatment. At the start of the trial, panoramic radiographs and dental casts were compared between the TG and the CG with the Mann-Whitney U test (P <0.05). At the second observation (cervical vertebral maturation stage 5 or 6), all subjects were reevaluated, and the eruption of the maxillary permanent canines was assessed. The rates of success in the TG were compared with those in the CG by means of chi-square tests (P <0.05). The association of PDCs with other dental anomalies was reported. No statistically significant difference was found for any measurement at the start of the trial between the 2 groups. The prevalence rates of eruption of the maxillary canines were 80% for the TG and 28% in the CG, a statistically significant difference (chi-square =16.26, P <0.001). The prevalence rate at the start for the pubertal stages of cervical vertebral maturation (63%) was significantly greater in the unsuccessfully treated subjects than in the successfully treated ones (16%). In the CG, all successful subjects had PDCs that overlapped the corresponding deciduous canine or the distal aspect of the lateral incisor. Eruption of PDCs in both groups was associated significantly with an open root apex. Rapid maxillary expansion therapy followed by a transpalatal arch combined with extraction of the deciduous canine is effective in treating patients in the late mixed dentition with PDCs. Pretreatment variables indicating success of treatment on the eruption of PDCs were less severe sectors of displacement, prepubertal stages of skeletal maturity, and open root apices of PDCs. Several dental anomalies were associated significantly with PDCs, thus confirming the genetic etiology of this eruption disturbance. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Association between developmental enamel defects in the primary and permanent dentitions.

PubMed

Casanova-Rosado, A J; Medina-Solís, C E; Casanova-Rosado, J F; Vallejos-Sánchez, A A; Martinez-Mier, E A; Loyola-Rodríguez, J P; Islas-Márquez, A J; Maupomé, G

2011-09-01

To determine if the presence of developmental enamel defects (DED) in the primary dentition is a risk indicator for the presence of DED in the permanent dentition in children with mixed dentition, as well as others factors. A cross-sectional study was undertaken in 1296 school children ages six to 72 years. The DED [FDI; 1982] in both dentitions were identified by means of an oral exam scoring enamel opacities [classified as demarcated or diffused], and enamel hypoplasia. Sociodemographic and socioeconomic variables were collected through a questionnaire. Socioeconomic status (SES) was determined based on the occupation and maximum level of education of parents. Statistical analysis included logistic regression. Mean age of participants was 8.40 +/- 1.68; 51.6% were boys. DED prevalence was 7.5% in the permanent dentition and 10.0% in the primary dentition. The logistic regression model, adjusting for sociodemographic and socioeconomic variables, showed that for each primary tooth with DED, the odds of observing DED in the permanent dentition increased 7.38 times [95% CI = 1.17-1.64; p < 0.001]. An association between DED presence in both permanent and primary dentitions was observed. Further studies are necessary to fully characterise such relationship.

Dental and oral anomalies in incontinentia pigmenti: a systematic review.

PubMed

Minić, Snežana; Trpinac, Dušan; Gabriel, Heinz; Gencik, Martin; Obradović, Miljana

2013-01-01

Incontinentia pigmenti (IP) is an X-linked genodermatosis caused by a mutation of the IKBKG gene. The objective of this study was to present a systematic review of the dental and oral types of anomalies, to determine the total number and sex distribution of the anomalies, and to analyze possible therapies. We analyzed the literature data from 1,286 IP cases from the period 1993-2010. Dental and/or oral anomalies were diagnosed for 54.38% of the investigated IP patients. Most of the anomaly types were dental, and the most frequent of these were dental shape anomalies, hypodontia, and delayed dentition. The most frequent oral anomaly types were cleft palate and high arched palate. IKBKG exon 4-10 deletion was present in 86.36% of genetically confirmed IP patients. According to the frequency, dental and/or oral anomalies represent the most frequent and important IP minor criteria. The most frequent mutation was IKBKG exon 4-10 deletion. The majority of dental anomalies and some of the oral anomalies could be corrected. Because of the presence of cleft palate and high arched palate in IP patients, these two anomalies may be considered as diagnostic IP minor criteria as well.

Dentoalveolar development in subjects with normal occlusion. A longitudinal study between the ages of 5 and 31 years.

PubMed

Thilander, Birgit

2009-04-01

The aim of the present study was to examine dentoalveolar development in subjects with an 'ideal' (normal) occlusion. The material comprised 436 study casts of 189 male and 247 female subjects of Swedish origin between the ages of 5 and 31 years with no history of orthodontic treatment. Tooth width, and arch length, width, and depth, as well as palatal height were measured. The data were analysed with a Student's t-test. The results verified that continuous changes of the dental arches occur from the primary until the adult period, with individual variations. This change could be interpreted as a biological migration of the dentition, resulting in anterior crowding especially in the mandible, even in subjects with congenitally missing third molars. The occlusion should be regarded as a dynamic rather than a stable interrelationship between facial structures. This natural development has to be considered in orthodontic treatment planning as well as in assessment of stability following orthodontic treatment. A continuous increase of palatal height up to adulthood seems to be an effect of a slow continuous eruption of the teeth. This finding is also of significance in explaining the infraposition of implant-supported crowns.

Dental and craniofacial findings in eight miniature schnauzer dogs affected by myotonia congenita: preliminary results.

PubMed

Gracis, M; Keith, D; Vite, C H

2000-09-01

Myotonia is a clinical sign characterized by the delay of skeletal muscle relaxation following the cessation of a voluntary activity or the termination of an electrical or mechanical stimulus. Recently, Miniature Schnauzers with myotonia congenita associated with defective chloride ion conductance across the skeletal muscle membrane were identified. Congenital myotonia in these dogs appears to follow an autosomal recessive mode of inheritance. Craniofacial and dental findings of eight Miniature Schnauzer dogs with myotonia congenita are described in the present paper. These findings include: delayed dental eruption of both deciduous and permanent dentition: persistent deciduous dentition; unerupted or partially erupted permanent teeth: crowding and rotation of premolar and or incisor teeth: missing teeth: increased interproximal space between the maxillary fourth premolar and first molar teeth: decreased interproximal space between the maxillary canine and lateral incisor teeth: inability to fully close the mouth due to malocclusion: distoclusion: and, decreased mandibular range of motion. A long narrow skull with a flattened zygomatic arch and greater mandibular body curvature were also consistent findings in the affected dogs. The small number of dogs studied prevents conclusive statements about the origin of these abnormalities, however it is interesting that only 1 of 45 unaffected Miniature Schnauzer dogs showed similar traits.

An Ancient Gene Network Is Co-opted for Teeth on Old and New Jaws

PubMed Central

Fraser, Gareth J; Hulsey, C. Darrin; Bloomquist, Ryan F; Uyesugi, Kristine; Manley, Nancy R; Streelman, J. Todd

2009-01-01

Vertebrate dentitions originated in the posterior pharynx of jawless fishes more than half a billion years ago. As gnathostomes (jawed vertebrates) evolved, teeth developed on oral jaws and helped to establish the dominance of this lineage on land and in the sea. The advent of oral jaws was facilitated, in part, by absence of hox gene expression in the first, most anterior, pharyngeal arch. Much later in evolutionary time, teleost fishes evolved a novel toothed jaw in the pharynx, the location of the first vertebrate teeth. To examine the evolutionary modularity of dentitions, we asked whether oral and pharyngeal teeth develop using common or independent gene regulatory pathways. First, we showed that tooth number is correlated on oral and pharyngeal jaws across species of cichlid fishes from Lake Malawi (East Africa), suggestive of common regulatory mechanisms for tooth initiation. Surprisingly, we found that cichlid pharyngeal dentitions develop in a region of dense hox gene expression. Thus, regulation of tooth number is conserved, despite distinct developmental environments of oral and pharyngeal jaws; pharyngeal jaws occupy hox-positive, endodermal sites, and oral jaws develop in hox-negative regions with ectodermal cell contributions. Next, we studied the expression of a dental gene network for tooth initiation, most genes of which are similarly deployed across the two disparate jaw sites. This collection of genes includes members of the ectodysplasin pathway, eda and edar, expressed identically during the patterning of oral and pharyngeal teeth. Taken together, these data suggest that pharyngeal teeth of jawless vertebrates utilized an ancient gene network before the origin of oral jaws, oral teeth, and ectodermal appendages. The first vertebrate dentition likely appeared in a hox-positive, endodermal environment and expressed a genetic program including ectodysplasin pathway genes. This ancient regulatory circuit was co-opted and modified for teeth in oral jaws of the first jawed vertebrate, and subsequently deployed as jaws enveloped teeth on novel pharyngeal jaws. Our data highlight an amazing modularity of jaws and teeth as they coevolved during the history of vertebrates. We exploit this diversity to infer a core dental gene network, common to the first tooth and all of its descendants. PMID:19215146

Tooth loss and general quality of life in dentate adults from Southern Brazil.

PubMed

Haag, Dandara Gabriela; Peres, Karen Glazer; Brennan, David Simon

2017-10-01

This study aimed to estimate the association between the number of teeth and general quality of life in adults. A population-based study was conducted with 1720 individuals aged 20-59 years residing in Florianópolis, Brazil, in 2009. Data were collected at participants' households using a structured questionnaire. In 2012, a second wave was undertaken with 1222 individuals. Oral examinations were performed for number of teeth, prevalence of functional dentition (≥21 natural teeth), and shortened dental arch (SDA), which were considered the main exposures. General quality of life was the outcome and was assessed with the WHO Abbreviated Instrument for Quality of Life (WHOQOL-BREF). Covariates included sociodemographic factors, health-related behaviors, and chronic diseases. Multivariable linear regression models were performed to test the associations between the main exposures and the outcome adjusted for covariates. In 2012, 1222 individuals participated in the study (response rate = 71.1%). Having more teeth was associated with greater scores on physical domain of the WHOQOL-BREF [β = 0.24 (95% CI 0.01; 0.46)] after adjustment for covariates. Absence of functional dentition was associated with lower scores on the physical domain [β = -3.94 (95% CI -7.40; -0.48)] in the adjusted analysis. There was no association between both SDA definitions and the domains of general quality of life. Oral health as measured by tooth loss was associated with negative impacts on general quality of life assessed by the WHOQOL-BREF. There was a lack of evidence that SDA is a condition that negatively affects general quality of life.

Integration of parts in the facial skeleton and cervical vertebrae.

PubMed

McCane, Brendan; Kean, Martin R

2011-01-01

The purpose of this study was to undertake an exploratory analysis of the relationship among parts in the facial skeleton and cervical vertebrae and their integration as 2-dimensional shapes by determining their individual variations and covariations. The study was motivated by considerations applicable to clinical orthodontics and maxillofacial surgery, in which such relationships bear directly on pretreatment analysis and assessment of posttreatment outcome. Lateral radiographs of 61 adolescents of both sexes without major malocclusions were digitized and marked up by using continuous outline spline curves for 8 defined parts in the facial skeleton, including the cervical vertebrae. Individual part variation was analyzed by using principal components analysis, and paired part covariation was analyzed by using 2-block partial least squares analysis in 2 modes: relative size, position, and shape; and shape only. For individual part variations, cranial base, soft-tissue profile, and mandible had the largest variations across the sample. For covariation of relative size, position, and shape, the cervical vertebrae were highly correlated with the cranial base (r = 0.80), nasomaxillary complex (r = 0.70), mandible (r = 0.74), maxillary dentition (r = 0.70), and mandibular dentition (r = 0.74); the maxillary dentition and mandibular dentition were highly correlated (r = 0.70); the mandible was highly correlated with the bony profile (r = 0.72), soft-tissue profile (r = 0.79), and, to a lesser extent, the cranial base (r = 0.67); the bony profile was highly correlated with the cranial base (r = 0.70) and soft-tissue profile (r = 0.80); the soft-tissue profile was highly correlated with the nasomaxillary dentition (r = 0.81). Covariation of shape only was much weaker with significant covariations found between bony profile and mandible (r = 0.53), bony profile and mandibular dentition (r = 0.65), mandibular dentition and soft-tissue profile (r = 0.54), mandibular dentition and maxillary dentition (r = 0.55), and bony profile and soft-tissue profile (r = 0.69). We found that integration of the shape of parts in the facial skeleton and cervical vertebrae is weak; it is the relative size, position, and orientation of parts that form the strongest correlations. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Periodontal disease detection in primary and mixed dentitions.

PubMed

Nobre, C M Guimarães; Fernandes-Costa, A N; de Melo Soares, M S; Pugliesi, D M Carvalho; de Vasconcelos Gurgel, B C

2016-10-01

This was to compare the periodontal status of children with primary and mixed dentition at the time of their first consultation. Children (200), aged 0-12 years (156 with mixed and 44 with primary dentition), were examined by assessing their simplified plaque index (PI) and simplified periodontal record (PSR). Statistical analysis (Chi-square test) was performed with appropriate software to find any significant associations between sex, type of dentition and PI with the PSR codes (0, 1, 2, 3 and 4). There was no statistically significant difference with regard to gender (p = 0.82). Generalised PI was associated more significantly with mixed dentition (p = 0.025 and higher PSR scores (p < 0.001). There was no significant relationship between sex and PSR codes (p = 0.82). Children presenting with a mixed dentition had worse PI values and PSR scores. It is important to perform periodontal examination in children to diagnose and prevent future periodontal disease and maintain their dentition as well as to identify any associated systemic conditions.

Orthodontic Treatment of Maxillary Incisors with Severe Root Resorption Caused by Bilateral Canine Impaction in a Class II Division 1 Patient.

PubMed

Chang, Na-Young; Park, Jae Hyun; Lee, Mi-Young; Cho, Jin-Woo; Cho, Jin-Hyoung; An, Ki-Yong; Chae, Jong-Moon

2016-01-01

This case report shows the successful alignment of bilateral impacted maxillary canines. A 12-year-old male with the chief complaint of the protrusion of his maxillary anterior teeth happened to have bilateral maxillary canine impaction on the labial side of his maxillary incisors. Four maxillary incisors showed severe root resorption because of the impacted canines. The patient was diagnosed as skeletal Class II malocclusion with proclined maxillary incisors. The impacted canine was carefully retracted using sectional buccal arch wires to avoid further root resorption of the maxillary incisors. To distalize the maxillary dentition, two palatal miniscrews were used. After 25 months of treatment, the maxillary canines were well aligned without any additional root resorption of the maxillary incisors.

[Fixed restorations of a dentition with reduced periodontal support in partially edentulous patients].

PubMed

De Boever, J A

1990-05-01

Placing restorations in patients who have a limited number of teeth and reduced periodontal support is no longer controversial, given careful selection of patients, preprosthetic periodontal treatment, and a thorough maintenance program. In this paper, attention is drawn to general prosthetic planning, including the use of long-span bridges. Because of increased tooth mobility, cross-arch stabilization of the bridges with interlocks or with postsolder connections is advocated. The framework should be rigid enough to avoid deflection of the bridges. Preparation of the vital and nonvital abutment teeth needs much attention. To avoid using a removable prosthesis, a cantilever bridge can be used, but it makes the construction more prone to fracture. A number of periodontal-prosthetic patients demonstrate a "posterior collapsed bite." Rehabilitation requires the restoration at a "new" vertical dimension of occlusion. This can be done, without functional hazards, in a one-step clinical procedure. A long functional adaptation period is unnecessary. The treatment outcome of furcations is not always predictable. Therefore, hemisection or amputation are often the treatments of choice. On these hemisected roots, bridges can be made and successfully maintained. Finally, it should be stressed that not all teeth have to be replaced: a premolar, shortened-arch occlusion is often sufficient for adequate function.

Establishing the diagnostic criteria for eruption disorders based on genetic and clinical data.

PubMed

Rhoads, Stephanie Golubic; Hendricks, Heather M; Frazier-Bowers, Sylvia A

2013-08-01

Proper diagnosis and management of eruption disturbances remains challenging but is critical to a functional occlusion. The objective of this study was to establish definitive criteria to differentiate and diagnose eruption disorders, specifically primary failure of eruption (PFE) and ankylosis. Sixty-four affected persons were placed into 3 cohorts: PFE diagnosed through confirmed PTH1R mutation (n = 11), PFE diagnosed based on clinical criteria (n = 47), and ankylosis diagnosed based on clinical criteria (n = 6). These groups were assessed to identify clinical features that differentiate PFE and ankylosis. Ninety-three percent of the subjects in the genetic and clinical PFE cohorts combined (n = 58) and 100% in the genetic PFE cohort had at least 1 infraoccluded first permanent molar. Additionally, a novel functional PTH1R mutation, 1092delG, was identified and linked to PFE in the deciduous dentition. An infraoccluded, supracrestal first molar is a hallmark of PFE, often involving both arches in the permanent or deciduous dentition, and with unilateral or bilateral affection, infraoccluded second premolar or second molar, and multiple affected adjacent teeth. Our results further suggest that PFE and ankylosis might be clinically indistinguishable without knowledge of prior trauma, treatment history, genetic information, or obliteration of the periodontal ligament space. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Abnormal primary and permanent dentitions with ectodermal symptoms predict WNT10A deficiency.

PubMed

Bergendal, Birgitta; Norderyd, Johanna; Zhou, Xiaolei; Klar, Joakim; Dahl, Niklas

2016-11-24

The WNT10A protein is critical for the development of ectodermal appendages. Variants in the WNT10A gene may be associated with a spectrum of ectodermal abnormalities including extensive tooth agenesis. In seven patients with severe tooth agenesis we identified anomalies in primary dentition and additional ectodermal symptoms, and assessed WNT10A mutations by genetic analysis. Investigation of primary dentition revealed peg-shaped crowns of primary mandibular incisors and three individuals had agenesis of at least two primary teeth. The permanent dentition was severely affected in all individuals with a mean of 21 missing teeth. Primary teeth were most often present in positions were succedaneous teeth were missing. Furthermore, most existing molars had taurodontism. Light, brittle or coarse hair was reported in all seven individuals, hyperhidrosis of palms and soles in six individuals and nail anomalies in two individuals. The anomalies in primary dentition preceded most of the additional ectodermal symptoms. Genetic analysis revealed that all seven individuals were homozygous or compound heterozygous for WNT10A mutations resulting in C107X, E222X and F228I. We conclude that tooth agenesis and/or peg-shaped crowns of primary mandibular incisors, severe oligodontia of permanent dentition as well as ectodermal symptoms of varying severity may be predictors of bi-allelic WNT10A mutations of importance for diagnosis, counselling and follow-up.

Effects of breast-feeding duration, bottle-feeding duration and non-nutritive sucking habits on the occlusal characteristics of primary dentition.

PubMed

Chen, Xiaoxian; Xia, Bin; Ge, Lihong

2015-04-21

Early transition from breastfeeding and non-nutritive sucking habits may be related to occlusofacial abnormalities as environmental factors. Previous studies have not taken into account the potential for interactions between feeding practice, non-nutritive sucking habits and occlusal traits. This study assessed the effects of breast-feeding duration, bottle-feeding duration and non-nutritive sucking habits on the occlusal characteristics of primary dentition in 3-6-year-old children in Peking city. This cross sectional study was conducted via an examination of the occlusal characteristics of 734 children combined with a questionnaire completed by their parents/guardians. The examination was performed by a single, previously calibrated examiner and the following variables were evaluated: presence or absence of deep overbite, open bite, anterior crossbite, posterior crossbite, deep overjet, terminal plane relationship of the second primary molar, primary canine relationship, crowding and spacing. Univariate analysis and multiple logistic regressions were applied to analyze the associations. It was found that a short duration of breast-feeding (never or ≤ 6 months) was directly associated with posterior cross bite (OR = 3.13; 95% CI = 1.11-8.82; P = 0.031) and no maxillary space (OR = 1.63; 95% CI = 1.23-2.98; P = 0.038). In children breast-fed for ≤ 6 months, the probability of developing pacifier-sucking habits was 4 times that for those breast-fed for >6 months (OR = 4.21; 95% CI = 1.85-9.60; P = 0.0002). Children who were bottle-fed for over 18 months had a 1.45-fold higher risk of nonmesial step occlusion and a 1.43-fold higher risk of a class II canine relationship compared with those who were bottle-fed for up to 18 months. Non-nutritive sucking habits were also found to affect occlusion: A prolonged digit-sucking habit increased the probability of an anterior open bite, while a pacifier-sucking habit associated with excessive overjet and absence of lower arch developmental space. Breastfeeding duration was shown to be associated with the prevalence of posterior crossbite, no maxillary space in the deciduous dentition and development of a pacifier-sucking habit. Children who had a digit-sucking habit were more likely to develop an open bite.

Spectrum of Dental Phenotypes in Nonsyndromic Orofacial Clefting.

PubMed

Howe, B J; Cooper, M E; Vieira, A R; Weinberg, S M; Resick, J M; Nidey, N L; Wehby, G L; Marazita, M L; Moreno Uribe, L M

2015-07-01

Children with oral clefts show a wide range of dental anomalies, adding complexity to understanding the phenotypic spectrum of orofacial clefting. The evidence is mixed, however, on whether the prevalence of dental anomalies is elevated in unaffected relatives and is mostly based on small samples. In the largest international cohort to date of children with nonsyndromic clefts, their relatives, and controls, this study characterizes the spectrum of cleft-related dental anomalies and evaluates whether families with clefting have a significantly higher risk for such anomalies compared with the general population. A total of 3,811 individuals were included: 660 cases with clefts, 1,922 unaffected relatives, and 1,229 controls. Dental anomalies were identified from in-person dental exams or intraoral photographs, and case-control differences were tested using χ(2) statistics. Cases had higher rates of dental anomalies in the maxillary arch than did controls for primary (21% vs. 4%, P = 3 × 10(-8)) and permanent dentitions (51% vs. 8%, P = 4 × 10(-62)) but not in the mandible. Dental anomalies were more prevalent in cleft lip with cleft palate than other cleft types. More anomalies were seen in the ipsilateral side of the cleft. Agenesis and tooth displacements were the most common dental anomalies found in case probands for primary and permanent dentitions. Compared with controls, unaffected siblings (10% vs. 2%, P = 0.003) and parents (13% vs. 7%, P = 0.001) showed a trend for increased anomalies of the maxillary permanent dentition. Yet, these differences were nonsignificant after multiple-testing correction, suggesting genetic heterogeneity in some families carrying susceptibility to both overt clefts and dental anomalies. Collectively, the findings suggest that most affected families do not have higher genetic risk for dental anomalies than the general population and that the higher prevalence of anomalies in cases is primarily a physical consequence of the cleft and surgical interventions. © International & American Associations for Dental Research 2015.

[A new method to orthodontically correct dental occlusal plane canting: wave-shaped arch].

PubMed

Zheng, X; Hu, X X; Ma, N; Chen, X H

2017-02-18

To introduce a technique of second order wave-shaped arch wire to orthodontically treat dental occlusal plane canting (DOPC) with left-right interactive anchorage, and to test its clinical efficacy. Among the permanent dentition malocclusion patients who showed no obvious facial asymmetry, we screened for patients who showed anterior occlusal plane canting (AOPC) after routine orthodontic examination, treatment planning, MBT fixed appliance installation and serial arch wires alignment. Each patient had been clinically appraised in frontal view by 2 orthodontists and the patient him/herself; if all 3 agreed that the AOPC was obvious, the patient was included. By this means, we included 37 patients, including 10 males and 27 females; the average age was (21.9±5.2) years. To correct AOPC, opposite direction equal curvature second order rocking-chair curve was bent on each side of 0.46 mm×0.56 mm stainless steel edgewise wire. With reference to normal occlusal plane, a curve toward the occlusal surface was made to extrude under-erupted teeth on one side while a curve toward the gingiva was made to intrude over-erupted teeth on the other side, so that the arch wire was made into a wave shape in vertical dimension. Before and after application of wave-shaped arch wire, frontal facial photographs were taken when the patient's mouth was open slightly with lips retracted to show anterior occlusal plane (AOP) clearly. An AOP was constructed by connecting the center of the slot in the medial edge of canine bracket on each side in the photograph. The angles between the bipupillary plane(BPP) and the constructed AOP were measured in ImageJ1-48v software and the angle differences before and after treatment were compared with paired Wilcoxon test in SPSS 10.0 software. The wave-shaped arch could correct AOPC effectively in 3 to 10 months time with an average of 5.5±1.7 months; the angles between AOP and BBP before treatment ranged from 2.90° to 6.12° with a median of 4.01°; after treatment the angles were from -0.17° to 2.57° with a median of 1.87°, the decrease of the angles between AOP and BBP after treatment ranged from 1.08° to 4.15° with a median of 2.21°. Paired Wilcoxon test P was 0.000. The wave-shaped arch can be used independently or in combination with other treatment methods, which can take advantage of left and right interactive anchorage to correct AOPC effectively, so it has certain application value in clinical practice.

Position and Eruption of Permanent Maxillary Canines in Cases of Maxillary Lateral Incisor Agenesis in Mixed Dentition.

PubMed

Lamas, Cátia; Lavall, Asela; Pinho, Teresa

2018-01-01

Assess whether the permanent maxillary canine (MC) has a natural tendency to erupt mesially in children with maxillary lateral incisors agenesis (MLIA), compared to children without agenesis. This retrospective, observational, cross-sectional study consisted of children between 5 and 12 years old divided into three groups: the first group with unilateral MLIA, in which an intraindividual analysis was performed, the second group presented bilateral MLIA, and the third group with patients without agenesis. These last two groups were matched for comparison interindividual, being pared by sex and maturation of the MC. The canine position in the horizontal sector showed a clear mesial positioning of the MC on the agenesis side in individuals with unilateral MLIA (group 1) when compared with the counter lateral side; and in individuals with bilateral MLIA (Group 2) compared with control Individuals without agenesis (group 3). Even with the maintenance of this deciduous tooth in the dental arch, the MC keeps its tendency to mesial eruption. There is a greater tendency for mesial angulation of the maxillary canine in patients with MLIA, regardless of the presence or absence of deciduous lateral incisor.

Unique pattern of dietary adaptation in the dentition of Carnivora: its advantage and developmental origin

PubMed Central

Saito, Kazuyuki; Kishida, Takushi; Takahashi, Katsu; Bessho, Kazuhisa

2016-01-01

Carnivora is a successful taxon in terms of dietary diversity. We investigated the dietary adaptations of carnivoran dentition and the developmental background of their dental diversity, which may have contributed to the success of the lineage. A developmental model was tested and extended to explain the unique variability and exceptional phenotypes observed in carnivoran dentition. Carnivorous mammalian orders exhibited two distinct patterns of dietary adaptation in molars and only Carnivora evolved novel variability, exhibiting a high correlation between relative molar size and the shape of the first molar. Studies of Bmp7-hetero-deficient mice, which may exhibit lower Bmp7 expression, suggested that Bmp7 has pleiotropic effects on these two dental traits. Its effects are consistent with the pattern of dietary adaptation observed in Carnivora, but not that observed in other carnivorous mammals. A molecular evolutionary analysis revealed that Bmp7 sequence evolved by natural selection during ursid evolution, suggesting that it plays an evolutionary role in the variation of carnivoran dentition. Using mouse experiments and a molecular evolutionary analysis, we extrapolated the causal mechanism of the hitherto enigmatic ursid dentition (larger M2 than M1 and M3). Our results demonstrate how carnivorans acquired novel dental variability that benefits their dietary divergence.

Dynamic Alterations in Salivary Microbiota Related to Dental Caries and Age in Preschool Children With Deciduous Dentition: A 2-Year Follow-Up Study

PubMed Central

Xu, Lei; Chen, Xi; Wang, Yuan; Jiang, Wen; Wang, Sa; Ling, Zongxin; Chen, Hui

2018-01-01

Dynamic alterations in oral microbiota are closely related to the development of dental caries;however, changes in salivary microbiota during this process have not been extensively studied. In addition, increasing evidence suggests that oral microbiome profiles differ according to dentition stages, but it is unclear whether they change with age during the same dentition, such as deciduous dentition. These two aspects were investigated in a 2-year follow-up study, and caries-free preschool children with complete deciduous dentition were enrolled. Saliva was collected and oral examination was conducted at the beginning of this trial, and then every subsequent 6 months for a total of five time points (T0, T1, T2, T3, and T4). Based on the clinical examination of teeth at the end of the trial, subjects were divided into health-to-health (H-H, N = 11) and health-to-caries (H-C, N = 12) groups at every time point. A total of 115 saliva samples from 23 subjects was detected by sequencing 16S rDNA V3-V4 hypervariable regions with the Illumina MiSeq platform to obtain microbiome profiles, and 100 samples finally passed quality control for further analyses. A total of 4,328,852 high-quality sequencing reads passed quality-control testing, representing 14 phyla, 27 classes, 43 orders, 67 families, and 127 genera. An α diversity analysis showed that salivary microbial diversity was similar in all groups, and a β diversity analysis showed that salivary microbial community structure changed with dental caries. Linear discriminant analysis effect size (LEfSe) analysis revealed that the abundance of the genera Atopobium, Megasphaera, and Veillonella increased significantly, while that of the genera Shuttleworthia and Rothia decreased significantly with the development of dental caries. Megasphaera and Veillonella were enriched at the early stage of deciduous dentition whereas Peptococcus, Rothia, and Treponema were enriched at the later stage. The core microbiome in the H-H and H-C groups comprised 26 and 29 genera, respectively, with statistical differences observed in 11 shared core genera. These results provide new insights into variations in the salivary microbiome related to dental caries and age in the deciduous dentition period. PMID:29670544

Dynamic Alterations in Salivary Microbiota Related to Dental Caries and Age in Preschool Children With Deciduous Dentition: A 2-Year Follow-Up Study.

PubMed

Xu, Lei; Chen, Xi; Wang, Yuan; Jiang, Wen; Wang, Sa; Ling, Zongxin; Chen, Hui

2018-01-01

Dynamic alterations in oral microbiota are closely related to the development of dental caries;however, changes in salivary microbiota during this process have not been extensively studied. In addition, increasing evidence suggests that oral microbiome profiles differ according to dentition stages, but it is unclear whether they change with age during the same dentition, such as deciduous dentition. These two aspects were investigated in a 2-year follow-up study, and caries-free preschool children with complete deciduous dentition were enrolled. Saliva was collected and oral examination was conducted at the beginning of this trial, and then every subsequent 6 months for a total of five time points (T0, T1, T2, T3, and T4). Based on the clinical examination of teeth at the end of the trial, subjects were divided into health-to-health (H-H, N = 11) and health-to-caries (H-C, N = 12) groups at every time point. A total of 115 saliva samples from 23 subjects was detected by sequencing 16S rDNA V3-V4 hypervariable regions with the Illumina MiSeq platform to obtain microbiome profiles, and 100 samples finally passed quality control for further analyses. A total of 4,328,852 high-quality sequencing reads passed quality-control testing, representing 14 phyla, 27 classes, 43 orders, 67 families, and 127 genera. An α diversity analysis showed that salivary microbial diversity was similar in all groups, and a β diversity analysis showed that salivary microbial community structure changed with dental caries. Linear discriminant analysis effect size (LEfSe) analysis revealed that the abundance of the genera Atopobium, Megasphaera , and Veillonella increased significantly, while that of the genera Shuttleworthia and Rothia decreased significantly with the development of dental caries. Megasphaera and Veillonella were enriched at the early stage of deciduous dentition whereas Peptococcus, Rothia , and Treponema were enriched at the later stage. The core microbiome in the H-H and H-C groups comprised 26 and 29 genera, respectively, with statistical differences observed in 11 shared core genera. These results provide new insights into variations in the salivary microbiome related to dental caries and age in the deciduous dentition period.

Computer-assisted design/computer-assisted manufacturing zirconia implant fixed complete prostheses: clinical results and technical complications up to 4 years of function.

PubMed

Papaspyridakos, Panos; Lal, Kunal

2013-06-01

To report the clinical results and technical complications with computer-assisted design/computer-assisted manufacturing (CAD/CAM) zirconia, implant fixed complete dental prostheses (IFCDPs) after 2-4 years in function. Fourteen consecutive edentulous patients (16 edentulous arches) were included in this study. Ten of the patients were women and four were men, with an average age of 58 years (range: 35-71). Ten mandibular and six maxillary arches were restored with porcelain fused to zirconia (PFZ) IFCDPs. Of the 16 arches, 14 received one-piece and 2 received segmented two-piece IFCDPs, respectively. The mean clinical follow-up period was 3 years (range: 2-4). At the last recall appointment, biological and technical parameters of dental implant treatment were evaluated. The implant and prosthesis survival rate following prosthesis insertion was 100% up to 4-year follow-up. The prostheses in 11 of the 16 restored arches were structurally sound, exhibited favorable soft tissue response, esthetics, and patient satisfaction. Five IFCDPs (31.25%) in four patients exhibited porcelain veneer chipping. Chipping was minor in three prostheses (three patients) and was addressed intraorally with polishing (one prosthesis) or composite resin (two prostheses). One patient with maxillary and mandibular zirconia IFCDP exhibited major porcelain chipping fractures which had to be repaired in the laboratory. Function, esthetics, and patient satisfaction were not affected in three of the four fracture incidents. Median crestal bone loss was 0.1 mm (0.01-0.2 mm). The presence of parafunctional activity, the IFCDP as opposing dentition, and the absence of occlusal night guard were associated with all the incidents of ceramic chipping. CAD/CAM zirconia IFCDPs are viable prosthetic treatment after 2-4 years in function, but not without complications. The porcelain chipping/fracture was the most frequent technical complication, with a 31.25% chipping rate at the prosthesis level. Despite the technical complications, increased patient satisfaction was noted. © 2012 John Wiley & Sons A/S.

A conservative approach to pediatric mandibular fracture management: outcome and advantages.

PubMed

Khatri, Amit; Kalra, Namita

2011-01-01

Pediatric mandibular fractures are rare and their treatment remains controversial. Management is extremely complicated in mixed dentition as it is inherently dynamic and unstable. Treatment options include soft diet, intermaxillary fixation with eyelet wires, arch bars, circummandibular wiring, or stents. Alternative options include open reduction and internal fixation through either an intraoral or extraoral approach. This case report describes and evaluates the conservative technique of acrylic splint in the treatment of pediatric mandible fracture in a 12-year-old female child. The patient with isolated mandibular fracture was treated with acrylic splint and interdental wiring followed by evaluation of clinical and radiographic healing as well as the somatosensory status. Patient demonstrated clinical union to her pre-injury occlusion by three to four weeks. Panoramic finding supported the finding of clinical examination throughout the study. High osteogenic potential of the pediatric mandible allowed conservative management to be successful in this case.

Developmental defects of enamel and dental caries in the primary dentition: A systematic review and meta-analysis.

PubMed

Costa, Francine S; Silveira, Ethieli R; Pinto, Gabriela S; Nascimento, Gustavo G; Thomson, William Murray; Demarco, Flávio F

2017-05-01

This systematic review and meta-analysis evaluated the association between developmental defects of enamel and dental caries in the primary dentition. Electronic searches were performed in PubMed, Web of Knowledge, Scopus and Scielo for the identification of relevant studies. Observational studies that examined the association between developmental defects of enamel and dental caries in the deciduous dentition were included. Additionally, meta-analysis, funnel plots and sensitivity analysis were employed to synthesize the available evidence. Multivariable meta-regression analysis was performed to explore heterogeneity among studies. A total of 318 articles were identified in the electronic searches. Of those, 16 studies were included in the meta-analysis. Pooled estimates revealed that children with developmental defects of enamel had higher odds of having dental caries (OR 3.32; 95%CI 2.41-4.57), with high heterogeneity between studies (I 2 80%). Methodological characteristic of the studies, such as where it was conducted, the examined teeth and the quality of the study explained about 30% of the variability. Concerning type of defect, children with hypoplasia and diffuse opacities had higher odds of having dental caries (OR 4.28; 95%CI 2.24-8.15; OR1.42; 95%CI 1.15-1.76, respectively). This systematic review and meta-analysis demonstrates a clear association between developmental defects of enamel and dental caries in the primary dentition. Copyright © 2017 Elsevier Ltd. All rights reserved.

Human evaluation in association to the mathematical analysis of arch forms: Two-dimensional study.

PubMed

Zabidin, Nurwahidah; Mohamed, Alizae Marny; Zaharim, Azami; Marizan Nor, Murshida; Rosli, Tanti Irawati

2018-03-01

To evaluate the relationship between human evaluation of the dental-arch form, to complete a mathematical analysis via two different methods in quantifying the arch form, and to establish agreement with the fourth-order polynomial equation. This study included 64 sets of digitised maxilla and mandible dental casts obtained from a sample of dental arch with normal occlusion. For human evaluation, a convenient sample of orthodontic practitioners ranked the photo images of dental cast from the most tapered to the less tapered (square). In the mathematical analysis, dental arches were interpolated using the fourth-order polynomial equation with millimetric acetate paper and AutoCAD software. Finally, the relations between human evaluation and mathematical objective analyses were evaluated. Human evaluations were found to be generally in agreement, but only at the extremes of tapered and square arch forms; this indicated general human error and observer bias. The two methods used to plot the arch form were comparable. The use of fourth-order polynomial equation may be facilitative in obtaining a smooth curve, which can produce a template for individual arch that represents all potential tooth positions for the dental arch. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.

Traumatic Dental Injuries in the primary dentition: a 15-year bibliometric analysis of Dental Traumatology.

PubMed

Kramer, Paulo Floriani; Onetto, Juan; Flores, Marie Therese; Borges, Tássia Silvana; Feldens, Carlos Alberto

2016-10-01

To explore the profile of articles on traumatic dental injuries (TDI) in the primary dentition published in Dental Traumatology in the last 15 years using bibliometric analysis. Three researchers read all titles and abstracts of articles published in Dental Traumatology between 2000 and 2014 (excluding editorials and letters) and selected all articles on TDI in the primary dentition. The articles were categorized according to year of publication, country in which the study was conducted, study design, and topics addressed. Divergences were resolved by consensus between the researchers. Among a total of 1257 articles published, 98 were initially excluded. Among the remaining 1159 articles, 152 (13.1%) focused on TDI in the primary dentition. The articles were conducted in 29 countries, with Brazil (38.8%) and Turkey (11.8%) accounting for the largest numbers. Cross-sectional studies (36.2%) and case report/case series (33.6%) were the most frequent study designs. Only two systematic reviews were published. The most commonly addressed topics were frequency/etiology/associated factors (36.8%), treatment (30.9%), and prognosis (19.7%). Among the articles addressing treatment, two-thirds were case reports or case series. The effects of TDI in primary teeth on their permanent successors were addressed in 20.4% of the articles (31/152). The number of articles on TDI in the primary dentition has increased, but remains low. The evaluation of study designs and topics addressed identified gaps that could contribute to the development of new studies on TDI in the primary dentition, especially cohort studies that evaluate risk factors, prognosis, and treatment. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Maxillary canine impactions related to impacted central incisors: two case reports.

PubMed

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by surgical exposure and traction of the impacted teeth and fixed orthodontic treatment. This case report provides some evidence of a significant environmental influence of an impacted maxillary central incisor on the path of eruption of the ipsilateral maxillary canine. When an impacted maxillary central incisor exists, the maxillary lateral incisor's root might be positioned distally into the path of eruption of the maxillary canine preventing its normal eruption. Ongoing assessment and early intervention might help to prevent such adverse situations from occurring.

A study of the response of nonlinear springs

NASA Technical Reports Server (NTRS)

Hyer, M. W.; Knott, T. W.; Johnson, E. R.

1991-01-01

The various phases to developing a methodology for studying the response of a spring-reinforced arch subjected to a point load are discussed. The arch is simply supported at its ends with both the spring and the point load assumed to be at midspan. The spring is present to off-set the typical snap through behavior normally associated with arches, and to provide a structure that responds with constant resistance over a finite displacement. The various phases discussed consist of the following: (1) development of the closed-form solution for the shallow arch case; (2) development of a finite difference analysis to study (shallow) arches; and (3) development of a finite element analysis for studying more general shallow and nonshallow arches. The two numerical analyses rely on a continuation scheme to move the solution past limit points, and to move onto bifurcated paths, both characteristics being common to the arch problem. An eigenvalue method is used for a continuation scheme. The finite difference analysis is based on a mixed formulation (force and displacement variables) of the governing equations. The governing equations for the mixed formulation are in first order form, making the finite difference implementation convenient. However, the mixed formulation is not well-suited for the eigenvalue continuation scheme. This provided the motivation for the displacement based finite element analysis. Both the finite difference and the finite element analyses are compared with the closed form shallow arch solution. Agreement is excellent, except for the potential problems with the finite difference analysis and the continuation scheme. Agreement between the finite element analysis and another investigator's numerical analysis for deep arches is also good.

Interventions for replacing missing teeth: partially absent dentition.

PubMed

Abt, Elliot; Carr, Alan B; Worthington, Helen V

2012-02-15

Management of individuals presenting with partial loss of teeth is a common task for dentists. Outcomes important to the management of missing teeth in the partially absent dentition should be systematically summarized. This review recognizes both the challenges associated with such a summarization and the critical nature of the information for patients. To assess the effects of different prostheses for the treatment of partially absent dentition in terms of the following outcomes: long-term success, function, morbidity and patient satisfaction. We searched the Cochrane Oral Health Group's Trials Register (to 21 March 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2011, Issue 1), MEDLINE via OVID (1950 to March 2011) and EMBASE via OVID (1980 to March 2011). There were no restrictions regarding language or date of publication. We contacted several authors to identify non-published trials. Randomized controlled trials (RCTs) comparing different methods (including the design and materials used) of treating partial edentulism, with clinically relevant outcomes, were included in this review. Trials reporting only surrogate outcomes, such as plaque accumulation or gingival volume, were excluded from this review. Two review authors independently carried out the screening of eligible studies, assessment of dimensions of quality of trials, and data extraction. Results were expressed as mean differences for continuous data, risk ratios for dichotomous outcomes, and hazard ratios with 95% confidence intervals for time-to-event data. Twenty-one trials met the inclusion criteria for this review. Twenty-four per cent of these were assessed as being at high risk of bias and the remainder were at unclear risk of bias. The clinical heterogeneity among the included studies precluded any attempt at meta-analysis. There was insufficient evidence to determine whether one type of removable dental prosthesis (RDP) was better or worse than another. With fixed dental prostheses (FDPs), there was no evidence that high gold alloys are better or worse than other alloys, nor that gold alloys or frameworks are better or worse than titanium. There is insufficient evidence to determine whether zirconia is better or worse that other FDP materials, that ceramic abutments are better or worse than titanium, or that one cement was better or worse than another in retaining FDPs. There is insufficient evidence to determine the relative effectiveness of FDPs and RDPs in patients with shortened dental arch or to determine the relative advantages of implant supported FDPs versus tooth/implant supported FDPs. Based on trials meeting the inclusion criteria for this review, there is insufficient evidence to recommend a particular method of tooth replacement for partially edentulous patients.

Three-dimensional analysis of the uniqueness of the anterior dentition in orthodontically treated patients and twins.

PubMed

Franco, A; Willems, G; Souza, P H C; Tanaka, O M; Coucke, W; Thevissen, P

2017-04-01

Dental uniqueness can be proven if no perfect match in pair-wise morphological comparisons of human dentitions is detected. Establishing these comparisons in a worldwide random population is practically unfeasible due to the need for a large and representative sample size. Sample stratification is an option to reduce sample size. The present study investigated the uniqueness of the human dentition in randomly selected subjects (Group 1), orthodontically treated patients (Group 2), twins (Group 3), and orthodontically treated twins (Group 4) in comparison with a threshold control sample of identical dentitions (Group 5). The samples consisted of digital cast files (DCF) obtained through extraoral 3D scanning. A total of 2.013 pair-wise morphological comparisons were performed (Group 1 n=110, Group 2 n=1.711, Group 3 n=172, Group 4 n=10, Group 5 n=10) with Geomagic Studio ® (3D Systems ® , Rock Hill, SC, USA) software package. Comparisons within groups were performed quantifying the morphological differences between DCF in Euclidean distances. Comparisons between groups were established applying One-way ANOVA. To ensure fair comparisons a post-hoc Power Analysis was performed. ROC analysis was applied to distinguish unique from non-unique dentures. Identical DCF were not detected within the experimental groups (from 1 to 4). The most similar DCF had Euclidian distance of 5.19mm in Group 1, 2.06mm in Group 2, 2.03mm in Group 3, and 1.88mm in Group 4. Groups 2 and 3 were statistically different from Group 5 (p<0.05). Statistically significant difference between Group 4 and 5 revealed to be possible including more pair-wise comparisons in both groups. The ROC analysis revealed sensitivity rate of 80% and specificity between 66.7% and 81.6%. Evidence to sustain the uniqueness of the human dentition in random and stratified populations was observed in the present study. Further studies testing the influence of the quantity of tooth material on morphological difference between dentitions and its impact on uniqueness remain necessary. Copyright © 2017 Elsevier B.V. All rights reserved.

Thin-plate spline analysis of arch form in a Southern European population with an ideal natural occlusion.

PubMed

Camporesi, Matteo; Franchi, Lorenzo; Baccetti, Tiziano; Antonini, Antonino

2006-04-01

The purpose of the present study was to identify the mean configuration of the clinical arch form in a sample of Southern European subjects with ideal natural occlusion by means of Procrustes analysis, and to compare the identified configuration with 10 commercially produced arch forms by means of thin-plate spline (TPS) analysis. The sample comprised the study casts of 50 subjects (26 males and 24 females). The mean age of the sample was 26 years +/- 4 years. All subjects were young Caucasian adults of Southern European ancestry, and presented with an ideal natural occlusion. The three-dimensional (3D) co-ordinates of all dental points (facial axis points) were digitized using a 3D electromagnetic digitizer. The morphometric technique of TPS analysis with permutation tests was used to compare the configurations of landmarks in the various specimens. No sexual dimorphism was found for either upper or lower arch forms when the shape of the arches was assessed independently from size. The commercially available arch form that showed the least, though statistically significant, shape difference with respect to the average calculated configuration was the Brader arch form.

A randomized controlled trial comparing two techniques for unilateral cleft lip and palate: Growth and speech outcomes during mixed dentition.

PubMed

Ganesh, Praveen; Murthy, Jyotsna; Ulaghanathan, Navitha; Savitha, V H

2015-07-01

To study the growth and speech outcomes in children who were operated on for unilateral cleft lip and palate (UCLP) by a single surgeon using two different treatment protocols. A total of 200 consecutive patients with nonsyndromic UCLP were randomly allocated to two different treatment protocols. Of the 200 patients, 179 completed the protocol. However, only 85 patients presented for follow-up during the mixed dentition period (7-10 years of age). The following treatment protocol was followed. Protocol 1 consisted of the vomer flap (VF), whereby patients underwent primary lip nose repair and vomer flap for hard palate single-layer closure, followed by soft palate repair 6 months later; Protocol 2 consisted of the two-flap technique (TF), whereby the cleft palate (CP) was repaired by two-flap technique after primary lip and nose repair. GOSLON Yardstick scores for dental arch relation, and speech outcomes based on universal reporting parameters, were noted. A total of 40 patients in the VF group and 45 in the TF group completed the treatment protocols. The GOSLON scores showed marginally better outcomes in the VF group compared to the TF group. Statistically significant differences were found only in two speech parameters, with better outcomes in the TF group. Our results showed marginally better growth outcome in the VF group compared to the TF group. However, the speech outcomes were better in the TF group. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

The relationships between the arrangement of teeth, root resorption, and dental maturity in bovine mandibular incisors

PubMed Central

An, Jin-kyu; Ono, Takashi

2017-01-01

Objective The objective of this study is to investigate the eruption pattern and root resorption of the bovine anterior dentition in relation to growth-related parameters based on dental maturity. Methods A cross-sectional study was conducted on 110 bovine anterior mandibles by using standard radiography, cone-beam computed tomography (CBCT), and actual measurements. We determined the relationships between the stages of dental maturity by using a modification of Demirjian's method and various growth-related parameters, such as the activity of the root-resorbing tissue and mobility of the deciduous teeth. The correlation of growth-related parameters with interdental spacing and distal unusual root resorption (DRR) of the deciduous fourth incisor was assessed. The cause of mesial unusual root resorption (MRR) of the deciduous fourth incisor was determined on the basis of the arrangement of the permanent third incisor. Results An independent t-test and chi-square test indicated significant differences in growth-related parameters associated with dental arch length discrepancy and factors related to the shedding of deciduous teeth between the low and high dental maturity groups. The samples with interdental spacing and DRR showed a larger sum of mesiodistal permanent crown widths and higher dental maturity than did the respective controls. Samples with MRR tended to show a lingually rotated distal tip of the adjacent tooth crown. Conclusions Dental maturity has relevance to the interdental spaces and unusual root resorption of mixed dentition. The position of the adjacent tooth crown on CBCT may be correlated with the occurrence of unusual root resorption of the incisor. PMID:29090124

The examination and identification of bite marks in foods using 3D scanning and 3D comparison methods.

PubMed

Naether, Silvio; Buck, Ursula; Campana, Lorenzo; Breitbeck, Robert; Thali, Michael

2012-01-01

Bite mark analysis offers the opportunity to identify the biter based on the individual characteristics of the dentitions. Normally, the main focus is on analysing bite mark injuries on human bodies, but also, bite marks in food may play an important role in the forensic investigation of a crime. This study presents a comparison of simulated bite marks in different kinds of food with the dentitions of the presumed biter. Bite marks were produced by six adults in slices of buttered bread, apples, different kinds of Swiss chocolate and Swiss cheese. The time-lapse influence of the bite mark in food, under room temperature conditions, was also examined. For the documentation of the bite marks and the dentitions of the biters, 3D optical surface scanning technology was used. The comparison was performed using two different software packages: the ATOS modelling and analysing software and the 3D studio max animation software. The ATOS software enables an automatic computation of the deviation between the two meshes. In the present study, the bite marks and the dentitions were compared, as well as the meshes of each bite mark which were recorded in the different stages of time lapse. In the 3D studio max software, the act of biting was animated to compare the dentitions with the bite mark. The examined food recorded the individual characteristics of the dentitions very well. In all cases, the biter could be identified, and the dentitions of the other presumed biters could be excluded. The influence of the time lapse on the food depends on the kind of food and is shown on the diagrams. However, the identification of the biter could still be performed after a period of time, based on the recorded individual characteristics of the dentitions.

Maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width groups

PubMed Central

Shahid, Fazal; Alam, Mohammad Khursheed; Khamis, Mohd Fadhli

2015-01-01

Objective: To investigate the maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width (intercanine, interpremolar, and intermolar) groups. Materials and Methods: The calculated sample size was 128 subjects. The crown width/height, arch length, arch perimeter, and arch width of the maxilla and mandible were obtained via digital calliper (Mitutoyo, Japan). A total of 4325 variables were measured. The sex differences in the crown width and height were evaluated. Analysis of variance was applied to evaluate the differences between arch length, arch perimeter, and arch width groups. Results: Males had significantly larger mean values for crown width and height than females (P ≤ 0.05) for maxillary and mandibular arches, both. There were no significant differences observed for the crown width/height ratio in various arch length, arch perimeter, and arch width (intercanine, interpremolar, and intermolar) groups (P ≤ 0.05) in maxilla and mandible, both. Conclusions: Our results indicate sexual disparities in the crown width and height. Crown width and height has no significant relation to various arch length, arch perimeter, and arch width groups of maxilla and mandible. Thus, it may be helpful for orthodontic and prosthodontic case investigations and comprehensive management. PMID:26929686

Possible Further Evidence of Low Genetic Diversity in the El Sidrón (Asturias, Spain) Neandertal Group: Congenital Clefts of the Atlas

PubMed Central

Ríos, Luis; Rosas, Antonio; Estalrrich, Almudena; García-Tabernero, Antonio; Bastir, Markus; Huguet, Rosa; Pastor, Francisco; Sanchís-Gimeno, Juan Alberto; de la Rasilla, Marco

2015-01-01

We present here the first cases in Neandertals of congenital clefts of the arch of the atlas. Two atlases from El Sidrón, northern Spain, present respectively a defect of the posterior (frequency in extant modern human populations ranging from 0.73% to 3.84%), and anterior (frequency in extant modern human populations ranging from 0.087% to 0.1%) arch, a condition in most cases not associated with any clinical manifestation. The fact that two out of three observable atlases present a low frequency congenital condition, together with previously reported evidence of retained deciduous mandibular canine in two out of ten dentitions from El Sidrón, supports the previous observation based on genetic evidence that these Neandertals constituted a group with close genetic relations. Some have proposed for humans and other species that the presence of skeletal congenital conditions, although without clinical significance, could be used as a signal of endogamy or inbreeding. In the present case this interpretation would fit the general scenario of high incidence of rare conditions among Pleistocene humans and the specific scenariothat emerges from Neandertal paleogenetics, which points to long-term small and decreasing population size with reduced and isolated groups. Adverse environmental factors affecting early pregnancies would constitute an alternative, non-exclusive, explanation for a high incidence of congenital conditions. Further support or rejection of these interpretations will come from new genetic and skeletal evidence from Neandertal remains. PMID:26418427

Possible Further Evidence of Low Genetic Diversity in the El Sidrón (Asturias, Spain) Neandertal Group: Congenital Clefts of the Atlas.

PubMed

Ríos, Luis; Rosas, Antonio; Estalrrich, Almudena; García-Tabernero, Antonio; Bastir, Markus; Huguet, Rosa; Pastor, Francisco; Sanchís-Gimeno, Juan Alberto; de la Rasilla, Marco

2015-01-01

We present here the first cases in Neandertals of congenital clefts of the arch of the atlas. Two atlases from El Sidrón, northern Spain, present respectively a defect of the posterior (frequency in extant modern human populations ranging from 0.73% to 3.84%), and anterior (frequency in extant modern human populations ranging from 0.087% to 0.1%) arch, a condition in most cases not associated with any clinical manifestation. The fact that two out of three observable atlases present a low frequency congenital condition, together with previously reported evidence of retained deciduous mandibular canine in two out of ten dentitions from El Sidrón, supports the previous observation based on genetic evidence that these Neandertals constituted a group with close genetic relations. Some have proposed for humans and other species that the presence of skeletal congenital conditions, although without clinical significance, could be used as a signal of endogamy or inbreeding. In the present case this interpretation would fit the general scenario of high incidence of rare conditions among Pleistocene humans and the specific scenariothat emerges from Neandertal paleogenetics, which points to long-term small and decreasing population size with reduced and isolated groups. Adverse environmental factors affecting early pregnancies would constitute an alternative, non-exclusive, explanation for a high incidence of congenital conditions. Further support or rejection of these interpretations will come from new genetic and skeletal evidence from Neandertal remains.

Arched-outer-race ball-bearing analysis considering centrifugal forces

NASA Technical Reports Server (NTRS)

Hamrock, B. J.; Anderson, W. J.

1972-01-01

A first-order thrust load analysis that considers centrifugal forces but which neglects gyroscopics, elastohydrodynamics, and thermal effects was performed. The analysis was applied to a 150-mm-bore angular-contact ball bearing. Fatigue life, contact loads, and contact angles are shown for conventional and arched bearings. The results indicate that an arched bearing is highly desirable for high-speed applications. In particular, at an applied load of 4448 n (1000 lb) and a DN value of 3 million (20,000 rpm) the arched bearing shows an improvement in life of 306 percent over that of a conventional bearing.

Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition.

PubMed

Rhee, Ye-Kyu; Huh, Yoon-Hyuk; Cho, Lee-Ra; Park, Chan-Jin

2015-12-01

The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05).

Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition

PubMed Central

Rhee, Ye-Kyu

2015-01-01

PURPOSE The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05). PMID:26816576

Comparative study on the mechanical mechanism of confined concrete supporting arches in underground engineering.

PubMed

Lv, Zhijin; Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang

2018-01-01

In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch's bearing capability is 1286.9 kN, and the CCC arch's ultimate bearing capability is 1072.4kN. Thus, the SQCC arch's bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and non-uniform load on the supporting arches. The research results could provide a theoretical basis for the design of confined concrete support in underground engineering.

The effect of foot arch on plantar pressure distribution during standing.

PubMed

Periyasamy, R; Anand, Sneh

2013-07-01

The aim of this study was to explore how foot type affects plantar pressure distribution during standing. In this study, 32 healthy subjects voluntarily participated and the subject feet were classified as: normal feet (n = 23), flat feet (n = 14) and high arch feet (n = 27) according to arch index (AI) values obtained from foot pressure intensity image analysis. Foot pressure intensity images were acquired by a pedopowergraph system to obtain a foot pressure distribution parameter-power ratio (PR) during standing in eight different regions of the foot. Contact area and mean PR were analysed in hind foot, mid-foot and fore foot regions. One-way analysis of variance was used to determine statistical differences between groups. The contact area and mean PR value beneath the mid-foot was significantly increased in the low arch foot when compared to the normal arch foot and high arch foot (p < 0.001) in both feet. However, subjects with low-arch feet had significantly higher body mass index (BMI) compared to subjects with high-arch feet (p < 0.05) and subjects with normal arch feet (p < 0.05) in both feet. In addition, subjects with low-arch feet had significant differences in arch index (AI) value as compared to subjects with high-arch feet (p < 0.001) and subjects with normal arch feet (p < 0.05) in both feet. Mean mid-foot PR value were positively (r = 0.54) correlated with increased arch index (AI) value. A significant (p < 0.05) change was obtained in PR value beneath the mid-foot of low arch feet when compared with other groups in both feet. The findings suggest that there is an increased mid-foot PR value in the low arch foot as compared to the normal arch foot and high arch foot during standing. Therefore, individuals with low arch feet could be at high risk for mid-foot collapse and Charcot foot problems, indicating that foot type should be assessed when determining an individual's risk for foot injury.

Oral condition and its relationship to nutritional status in the institutionalized elderly population.

PubMed

Rauen, Michelle Soares; Moreira, Emília Addison Machado; Calvo, Maria Cristina Marino; Lobo, Adriana Soares

2006-07-01

The objective of this study was to identify the relationship between the oral condition and nutritional status of all institutionalized elderly people in Florianópolis, Brazil. Of the population of 232 institutionalized individuals, the sample consisted of 187 elderly people. In the oral evaluation, the criteria used was the number of functional units present in the oral cavity, classifying the participants as those with highly compromised dentition (48%) and those with less-compromised dentition (52%). Diagnosis of nutritional status was carried out according to body mass index, observing a prevalence of 14% thin, 45% eutrophic, 28% overweight, and 13% obese. Statistical analysis of the variables studied was carried out by means of chi(2) association tests. There was a statistically significant association between highly compromised dentition and thinness (P=0.007) and among those who presented less-compromised dentition and the nutritional status of overweight, including obesity (P=0.014). It was concluded that compromising of the teeth could contribute to a tendency toward inadequate nutritional status.

Analysis of an arched outer-race ball bearing considering centrifugal forces

NASA Technical Reports Server (NTRS)

Hamrock, B. J.; Anderson, W. J.

1972-01-01

A Newton-Raphson method of iteration was used in evaluating the radial and axial projection of the distance between the ball center and the outer raceway groove curvature center (V and W). Fatigue life evaluations were made. The similar analysis of a conventional bearing can be directly obtained from the arched bearing analysis by simply letting the amount of arching be zero (g = 0) and not considering equations related to the unloaded half of the outer race. The analysis was applied to a 150-mm angular contact ball bearing. Results for life, contact loads, and angles are shown for a conventional bearing (g = 0) and two arched bearings (g = 0.127 mm (0.005 in.), and 0.254 mm (0.010 in.)). The results indicate that an arched bearing is highly desirable for high speed applications. In particular, for a DN value of 3 million (20,000 rpm) and an applied axial load of 4448 N (1000 lb), an arched bearing shows an improvement in life of 306 percent over that of a conventional bearing. At 4.2 million DN (28,000 rpm), the corresponding improvement is 340 percent. It was also found for low speeds, the arched bearing does not offer the advantages that it does for high speed applications.

Correlation and agreement of a digital and conventional method to measure arch parameters.

PubMed

Nawi, Nes; Mohamed, Alizae Marny; Marizan Nor, Murshida; Ashar, Nor Atika

2018-01-01

The aim of the present study was to determine the overall reliability and validity of arch parameters measured digitally compared to conventional measurement. A sample of 111 plaster study models of Down syndrome (DS) patients were digitized using a blue light three-dimensional (3D) scanner. Digital and manual measurements of defined parameters were performed using Geomagic analysis software (Geomagic Studio 2014 software, 3D Systems, Rock Hill, SC, USA) on digital models and with a digital calliper (Tuten, Germany) on plaster study models. Both measurements were repeated twice to validate the intraexaminer reliability based on intraclass correlation coefficients (ICCs) using the independent t test and Pearson's correlation, respectively. The Bland-Altman method of analysis was used to evaluate the agreement of the measurement between the digital and plaster models. No statistically significant differences (p > 0.05) were found between the manual and digital methods when measuring the arch width, arch length, and space analysis. In addition, all parameters showed a significant correlation coefficient (r ≥ 0.972; p < 0.01) between all digital and manual measurements. Furthermore, a positive agreement between digital and manual measurements of the arch width (90-96%), arch length and space analysis (95-99%) were also distinguished using the Bland-Altman method. These results demonstrate that 3D blue light scanning and measurement software are able to precisely produce 3D digital model and measure arch width, arch length, and space analysis. The 3D digital model is valid to be used in various clinical applications.

Three-dimensional validation of the impact of the quantity of teeth or tooth parts on the morphological difference between twin dentitions.

PubMed

Franco, A; Willems, G; Couto Souza, P H; Coucke, W; Thevissen, P

2016-07-01

The number of teeth involved in cases of bite-mark analysis is generally fewer in comparison to the number of teeth available for cases of dental identification. This decreases the amount of information available and can hamper the distinction between bite suspects. The opposite is true in cases of dental identification and the assumption is that more teeth contribute to a higher degree of specificity and the possibility of identification in these cases. Despite being broadly accepted in forensic dentistry, this hypothesis has never been scientifically tested. The present study aims to assess the impact of the quantity of teeth or tooth parts on morphological differences in twin dentitions. A sample of 344 dental casts collected from 86 pairs of twins was used. The dental casts were digitized using an automated motion device (XCAD 3D® (XCADCAM Technology®, São Paulo, SP, Brazil) and were imported as three-dimensional dental model images (3D-DMI) in Geomagic Studio® (3D Systems®, Rock Hill, SC, USA) software package. Sub samples were established based on the quantity of teeth and tooth parts studied. Pair wise morphological comparisons between the corresponding twin siblings were established and quantified. Increasing the quantity of teeth and tooth parts resulted in an increase of morphological difference between twin dentitions. More evident differences were observed comparing anterior vs. entire dentitions (p < 0.05) and complete vs. partial anterior dentitions (p < 0.05). Dental identifications and bite-mark analysis must include all the possibly related dental information to reach optimal comparison outcomes.

Anchorage condition during canine retraction using transpalatal arch with continuous and segmented arch mechanics.

PubMed

Alhadlaq, Adel; Alkhadra, Thamer; El-Bialy, Tarek

2016-05-01

To compare anchorage condition in cases in which transpalatal arch was used to enhance anchorage in both continuous and segmented arch techniques. Twenty cases that required first premolar extraction for orthodontic treatment and transpalatal arch to enhance anchorage were included in this study. Ten cases were treated using the continuous arch technique, while the other 10 cases were treated using 0.019 × 0.025-inch TMA T-loops with posterior anchorage bend according to the Burstone and Marcotte description. Lateral cephalometric analysis of before and after canine retraction was performed using Ricketts analysis to measure the anteroposterior position of the upper first molar to the vertical line from the Pt point. Data were analyzed using an independent sample t-test. There was a statistically significant forward movement of the upper first molar in cases treated by continuous arch mechanics (4.5 ± 3.0 mm) compared with segmented arch mechanics (-0.7 ± 1.4 mm; P  =  .01). The posterior anchorage bend to T-loop used to retract the maxillary canine can enhance anchorage during maxillary canine retraction.

Optimization of shallow arches against instability using sensitivity derivatives

NASA Technical Reports Server (NTRS)

Kamat, Manohar P.

1987-01-01

The author discusses the problem of optimization of shallow frame structures which involve a coupling of axial and bending responses. A shallow arch of a given shape and of given weight is optimized such that its limit point load is maximized. The cross-sectional area, A(x) and the moment of inertia, I(x) of the arch obey the relationship I(x) = rho A(x) sup n, n = 1,2,3 and rho is a specified constant. Analysis of the arch for its limit point calculation involves a geometric nonlinear analysis which is performed using a corotational formulation. The optimization is carried out using a second-order projected Lagrangian algorithm and the sensitivity derivatives of the critical load parameter with respect to the areas of the finite elements of the arch are calculated using implicit differentation. Results are presented for an arch of a specified rise to span ratio under two different loadings and the limitations of the approach for the intermediate rise arches are addressed.

Orthodontic correction of a transposed maxillary canine and first premolar in the permanent dentition.

PubMed

Nishimura, Kazuaki; Nakao, Kimihisa; Aoki, Taijyu; Fuyamada, Mariko; Saito, Keisuke; Goto, Shigemi

2012-10-01

The patient was a 16-year-old Japanese girl whose chief complaints were crowding and transposition of the maxillary canine and first premolar. A setup model was used to preoperatively align the teeth in their transposed positions. The amount of postoperative reshaping was estimated for the occlusal surfaces of the teeth. However, the patient did not wish to have her teeth reduced by reshaping or to have composite materials for restorative camouflage. Because she strongly expected alignment of her teeth in the correct intra-arch position, her transposed teeth were corrected without extraction of the transposed teeth. Cone-beam computed tomography was used to obtain more detailed information about the transposition, and the direction of tooth movement was examined. Although the duration of the treatment was long, both the crowns and the roots of the transposed teeth were aligned correctly. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Deciduous dentition: anatomical study by μ-CT].

PubMed

Bossù, Maurizio; Valletta, Alessandra; Fiore, Roberto; Riccitiello, Francesco; D'Amora, Marilina; Coppolino, Francesco; Simeone, Michele; Polimeni, Antonella

2013-01-01

Endodontics is the branch of deciduous teeth pediatric dentistry that deals with the treatment of the root canal system. The goal of therapy is to maintain as long as possible the element in the dental arch to prevent alterations of orthognathodontic, infectious, and functional history and eruptive sequence. Although manual instrumentation has been widely used and still preferred by some practitioners, has limitations that affect the actual ability to clean the channel, the ability to create steps, perforations, dentinal plugs and fractures of the instrument. On the other hand, the disadvantages are the high cost of the instruments in nickel-titanium, which must be frequently replaced, and the risk of compromising the stability of the tooth due to an excessive consumption of dentinal tissue. The use of computed microtomography (μCT) of extracted elements has a considerable advantage in the study of dental hard tissues. The purpose of this study was to analyze the anatomy of the endodontic system of the elements deciduous.

Rearfoot eversion has indirect effects on plantar fascia tension by changing the amount of arch collapse.

PubMed

Lee, Sae Yong; Hertel, Jay; Lee, Sung Cheol

2010-01-01

Rearfoot eversion motion and arch height are believed to contribute to increased tension on the plantar fascia and arch collapse during gait but the specifics of these relationships are not clear. To examine the relationships among static arch height, rearfoot eversion, dynamic arch height, and plantar fascia tension. 28 healthy males participated. After static arch height was measured, the subjects were asked to run at 4.5m/s while frontal plane rearfoot motion, dynamic arch height, and ground reaction forces were collected. The relationships among variables were examined with bivariate correlations and path analysis. The results indicated a high correlation between dynamic arch height and static arch height (r=0.642), plantar fascia tension (r=-0.797), and maximum rearfoot eversion motion during gait (r=-0.518). The path analysis model without the direct rearfoot eversion effect explained 81.2% of the variance in plantar fascia tension, while the model with the direct rearfoot eversion effect explained 82.1% of the variance in plantar fascia tension. Including the indirect effect of maximum rearfoot eversion motion on plantar fascia tension through control of dynamic arch height is the model that best explains the interrelationships of these foot characteristics. The amount of maximum rearfoot eversion motion itself is not a good predictor of plantar fascia tension, however, together with the arch height, maximum rearfoot eversion motion is a good predictor because it has a pronounced indirect effect on plantar fascia tension. Copyright 2010. Published by Elsevier Ltd.

A Foot-Arch Parameter Measurement System Using a RGB-D Camera.

PubMed

Chun, Sungkuk; Kong, Sejin; Mun, Kyung-Ryoul; Kim, Jinwook

2017-08-04

The conventional method of measuring foot-arch parameters is highly dependent on the measurer's skill level, so accurate measurements are difficult to obtain. To solve this problem, we propose an autonomous geometric foot-arch analysis platform that is capable of capturing the sole of the foot and yields three foot-arch parameters: arch index (AI), arch width (AW) and arch height (AH). The proposed system captures 3D geometric and color data on the plantar surface of the foot in a static standing pose using a commercial RGB-D camera. It detects the region of the foot surface in contact with the footplate by applying the clustering and Markov random field (MRF)-based image segmentation methods. The system computes the foot-arch parameters by analyzing the 2/3D shape of the contact region. Validation experiments were carried out to assess the accuracy and repeatability of the system. The average errors for AI, AW, and AH estimation on 99 data collected from 11 subjects during 3 days were -0.17%, 0.95 mm, and 0.52 mm, respectively. Reliability and statistical analysis on the estimated foot-arch parameters, the robustness to the change of weights used in the MRF, the processing time were also performed to show the feasibility of the system.

Analysis of rotational and sliding collapse modes of masonry arches via Durand-Claye's method

NASA Astrophysics Data System (ADS)

Barsotti, Riccardo; Aita, Danila; Bennati, Stefano

2017-11-01

In this paper the mechanical behavior of circular and pointed masonry arches subject to their own weight is examined in order to determine their collapse modes. Different arch's shapes and thicknesses are considered; the influence of the friction coefficient on the arch collapse is analyzed as well. The safety level of arches is investigated by suitably reworking in semi-analytical form the stability area graphical method proposed by a renowned 19th century French scholar, Durand-Claye. Our analysis enables accounting for any given eccentricity of the thrust at the crown; furthermore, also the strength of masonry is taken into account. According to Durand-Claye's method, the arch is safe if along any given joint both the bending moment and the shear force do not exceed some given limit values. It is shown that attainment of a limit condition according to Durand-Claye corresponds to the onset of a collapse mechanism characterized by either relative rotation or sliding between masonry units. All possible symmetric collapse modes for an arch are thoroughly described. As it was expected, pointed and circular arches show different collapse behaviors. Limit values of arch thickness and friction coefficient are assessed. The results obtained are compared with those given by Michon in 1857.

A Foot-Arch Parameter Measurement System Using a RGB-D Camera

PubMed Central

Kong, Sejin; Mun, Kyung-Ryoul; Kim, Jinwook

2017-01-01

The conventional method of measuring foot-arch parameters is highly dependent on the measurer’s skill level, so accurate measurements are difficult to obtain. To solve this problem, we propose an autonomous geometric foot-arch analysis platform that is capable of capturing the sole of the foot and yields three foot-arch parameters: arch index (AI), arch width (AW) and arch height (AH). The proposed system captures 3D geometric and color data on the plantar surface of the foot in a static standing pose using a commercial RGB-D camera. It detects the region of the foot surface in contact with the footplate by applying the clustering and Markov random field (MRF)-based image segmentation methods. The system computes the foot-arch parameters by analyzing the 2/3D shape of the contact region. Validation experiments were carried out to assess the accuracy and repeatability of the system. The average errors for AI, AW, and AH estimation on 99 data collected from 11 subjects during 3 days were −0.17%, 0.95 mm, and 0.52 mm, respectively. Reliability and statistical analysis on the estimated foot-arch parameters, the robustness to the change of weights used in the MRF, the processing time were also performed to show the feasibility of the system. PMID:28777349

Comparative study on the mechanical mechanism of confined concrete supporting arches in underground engineering

PubMed Central

Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang

2018-01-01

In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch’s bearing capability is 1286.9 kN, and the CCC arch’s ultimate bearing capability is 1072.4kN. Thus, the SQCC arch’s bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and non-uniform load on the supporting arches. The research results could provide a theoretical basis for the design of confined concrete support in underground engineering. PMID:29447187

Spatially restricted dental regeneration drives pufferfish beak development

PubMed Central

Thiery, Alexandre P.; Shono, Takanori; Kurokawa, Daisuke; Britz, Ralf; Johanson, Zerina

2017-01-01

Vertebrate dentitions are extraordinarily diverse in both morphology and regenerative capacity. The teleost order Tetraodontiformes exhibits an exceptional array of novel dental morphologies, epitomized by constrained beak-like dentitions in several families, i.e., porcupinefishes, three-toothed pufferfishes, ocean sunfishes, and pufferfishes. Modification of tooth replacement within these groups leads to the progressive accumulation of tooth generations, underlying the structure of their beaks. We focus on the dentition of the pufferfish (Tetraodontidae) because of its distinct dental morphology. This complex dentition develops as a result of (i) a reduction in the number of tooth positions from seven to one per quadrant during the transition from first to second tooth generations and (ii) a dramatic shift in tooth morphogenesis following the development of the first-generation teeth, leading to the elongation of dental units along the jaw. Gene expression and 1,1′-Dioctadecyl-3,3,3′,3′-tetramethylindocarbocyanine perchlorate (DiI) lineage tracing reveal a putative dental epithelial progenitor niche, suggesting a highly conserved mechanism for tooth regeneration despite the development of a unique dentition. MicroCT analysis reveals restricted labial openings in the beak, through which the dental epithelium (lamina) invades the cavity of the highly mineralized beak. Reduction in the number of replacement tooth positions coincides with the development of only four labial openings in the pufferfish beak, restricting connection of the oral epithelium to the dental cavity. Our data suggest the spatial restriction of dental regeneration, coupled with the unique extension of the replacement dental units throughout the jaw, are primary contributors to the evolution and development of this unique beak-like dentition. PMID:28507130

Further delineation of the SATB2 phenotype.

PubMed

Döcker, Dennis; Schubach, Max; Menzel, Moritz; Munz, Marita; Spaich, Christiane; Biskup, Saskia; Bartholdi, Deborah

2014-08-01

SATB2 is an evolutionarily highly conserved chromatin remodeling gene located on chromosome 2q33.1. Vertebrate animal models have shown that Satb2 has a crucial role in craniofacial patterning and osteoblast differentiation, as well as in determining the fates of neuronal projections in the developing neocortex. In humans, chromosomal translocations and deletions of 2q33.1 leading to SATB2 haploinsufficiency are associated with cleft palate (CP), facial dysmorphism and intellectual disability (ID). A single patient carrying a nonsense mutation in SATB2 has been described to date. In this study, we performed trio-exome sequencing in a 3-year-old girl with CP and severely delayed speech development, and her unaffected parents. Previously, the girl had undergone conventional and molecular karyotyping (microarray analysis), as well as targeted analysis for different diseases associated with developmental delay, including Angelman syndrome, Rett syndrome and Fragile X syndrome. No diagnosis could be established. Exome sequencing revealed a de novo nonsense mutation in the SATB2 gene (c.715C>T; p.R239*). The identification of a second patient carrying a de novo nonsense mutation in SATB2 confirms that this gene is essential for normal craniofacial patterning and cognitive development. Based on our data and the literature published so far, we propose a new clinically recognizable syndrome - the SATB2-associated syndrome (SAS). SAS is likely to be underdiagnosed and should be considered in children with ID, severe speech delay, cleft or high-arched palate and abnormal dentition with crowded and irregularly shaped teeth.

Comparative Numerical Analysis of Different Strengthening Systems of Historical Brick Arches

NASA Astrophysics Data System (ADS)

Zielińska, M.

2017-05-01

The article presents a comparative numerical analysis of various ways to strengthen historical brick arches. Five ways of strengthening brick arches with steel tie-rods have been proposed. Two of these involve the use of braces wrapped around pillars supporting the arch connected with a tie-rod; the other two ways involve the use of the tie-rods with welded metal sheets of different sizes; the latter involves the use of a tie-rod glued with the use of an epoxy adhesive. The collected data were compared with the reference model of the arch left without any interference. The results make it possible to evaluate the effectiveness of the methods by comparing displacements in the vertical and horizontal direction and stresses. The article indicates the direction of proper planning and design of the arch strengthening in brick structures in historical buildings.

How to test validity in orthodontic research: a mixed dentition analysis example.

PubMed

Donatelli, Richard E; Lee, Shin-Jae

2015-02-01

The data used to test the validity of a prediction method should be different from the data used to generate the prediction model. In this study, we explored whether an independent data set is mandatory for testing the validity of a new prediction method and how validity can be tested without independent new data. Several validation methods were compared in an example using the data from a mixed dentition analysis with a regression model. The validation errors of real mixed dentition analysis data and simulation data were analyzed for increasingly large data sets. The validation results of both the real and the simulation studies demonstrated that the leave-1-out cross-validation method had the smallest errors. The largest errors occurred in the traditional simple validation method. The differences between the validation methods diminished as the sample size increased. The leave-1-out cross-validation method seems to be an optimal validation method for improving the prediction accuracy in a data set with limited sample sizes. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Meta-analysis of the prevalence of tooth wear in primary dentition.

PubMed

Corica, A; Caprioglio, A

2014-12-01

To conduct a meta-analysis of all the studies published in literature over the past three decades on the prevalence of dental erosion in preschool children. The Pubmed data base revealed only one systematic review on the prevalence of tooth wear in children up to 5 years old. The search included works published from January 1982 to September 2012, using the following combinations of keywords: 1) "dental erosion" AND "children"; 2) "dental erosion in primary dentition"; 3) "dental" AND "attrition" AND "prevalence". The inclusion criteria for papers on tooth wear were the deciduous dentition observed only on the palatal and buccal sides with the distinction of erosion, attrition and abrasion. We took into consideration only randomized control trials. We excluded articles not written in English, case reports, historical and forensic studies, in vitro and in vivo studies. In case of doubt and/or when an abstract was not available, the full text copy of the article was examined. The first search on Pubmed revealed 29 articles, the same found in the study of Kreulen [2010], however we selected only multicentric studies focused on children of age below 5 years old, in which only the primary dentition (D) and only anterior teeth (incisors) were considered. Both forest plot and scatter plot showed the prevalence of dental erosion in primary dentition, and that older children had a more severe dental erosion. Dental erosion should be considered a paediatric dentistry pathological entity as well as dental caries, and it can be related to more severe systemic diseases such as Gastroesophageal reflux disease. In addition, taking care of these little patients is important because they might suffer persentiveness, and also pulpal pathology caused by the typical structure of deciduous teeth, where the pulp cavity is wide and close to the dentine and the enamel.

Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

PubMed

Jing, Yan; Han, Xianglong; Guo, Yongwen; Li, Jingyu; Bai, Ding

2013-06-01

This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

The mandibular third molar position as a predictive criteria for risk for pericoronitis: a retrospective study.

PubMed

Halverson, B A; Anderson, W H

1992-03-01

During the 6-month period from mid February 1988 to mid August 1988, 148 patients presented with 154 diagnosed cases of mandibular third molar pericoronitis. All patients were members of the recruit population stationed at the Recruit Training Command, Great Lakes, Illinois. Selected clinical parameters relating to the orientation and eruption status of these third molars were collected and analyzed. The goal was to obtain a predictive clinical profile of the impacted mandibular third molar (MTM) at greatest risk for pericoronitis in the young naval and Marine Corps personnel. The majority of pericoronitis cases, 120 of 148 or 81.0%, involved vertically oriented MTMs; of this total, 79.1% were erupted to the approximate height of the occlusal plane of the arch. The remaining 20.9% were at or below the height of contour of the adjacent tooth. Mesioangular impacted MTMs accounted for only 11.2% of pericoronitis cases. The remaining cases comprised distoangular and horizontally impacted MTMs (3.4% and 3.8%, respectively). Involvement by impinging maxillary dentition was observed in 39.7% of the vertically oriented MTMs, 56.2% of the mesioangular oriented MTMs, 40.0% of the distoangular MTMs, and 14.0% of the horizontally impacted MTMs. The mean value for occlusal coverage by a soft tissue operculum observed for all MTMs in this study was 49%. In the population studied, risk for pericoronitis appears to increase with greater vertical orientation and height of eruption. The absence of impinging maxillary dentition did not eliminate the risk of mandibular third molar pericoronitis. These data have implications for targeting treatment needs of naval and Marine Corps personnel who may be without dental support for extended periods of time.

Properties of some statistics for AR-ARCH model with application to technical analysis

NASA Astrophysics Data System (ADS)

Huang, Xudong; Liu, Wei

2009-03-01

In this paper, we investigate some popular technical analysis indexes for AR-ARCH model as real stock market. Under the given conditions, we show that the corresponding statistics are asymptotically stationary and the law of large numbers hold for frequencies of the stock prices falling out normal scope of these technical analysis indexes under AR-ARCH, and give the rate of convergence in the case of nonstationary initial values, which give a mathematical rationale for these methods of technical analysis in supervising the security trends.

An Alternative Method of Intermaxillary Fixation for Simple Pediatric Mandible Fractures.

PubMed

Farber, Scott J; Nguyen, Dennis C; Harvey, Alan A; Patel, Kamlesh B

2016-03-01

Mandibular fractures represent a substantial portion of facial fractures in the pediatric population. Pediatric mandibles differ from their adult counterparts in the presence of mixed dentition. Avoidance of injury to developing tooth follicles is critical. Simple mandibular fractures can be treated with intermaxillary fixation (IMF) using arch bars or bone screws. This report describes an alternative to these methods using silk sutures and an algorithm to assist in treating simple mandibular fractures in the pediatric population. A retrospective chart review was performed and the records of 1 surgeon were examined. Pediatric patients who underwent treatment for a mandibular fracture in the operating room from 2011 to 2015 were identified using Common Procedural Terminology codes. Data collected included age, gender, type of fracture, type of treatment used, duration of fixation, and presence of complications. Five patients with a mean age of 6.8 years at presentation were identified. Fracture types were unilateral fractures of the condylar neck (n = 3), bilateral fractures of the condylar head (n = 1), and a unilateral fracture of the condylar head with an associated parasymphyseal fracture (n = 1). IMF was performed in 4 patients using silk sutures, and bone screw fixation was performed in the other patient. No post-treatment complications or malocclusion were reported. Average duration of IMF was 18.5 days. An algorithm is presented to assist in the treatment of pediatric mandibular fractures. Silk suture fixation is a viable and safe alternative to arch bars or bone screws for routine mandibular fractures. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

The role of polymorphisms associated with early tooth eruption in dental and occlusal traits in East Asian populations

PubMed Central

Kawaguchi, Akira; Kim, Yong-Il; Haga, Shugo; Katayama, Koshu; Ishida, Hajime; Park, Soo-Byung; Maki, Koutaro; Kimura, Ryosuke

2014-01-01

Objective A recent study suggested that rs6504340, a polymorphism within the homeobox B (HOXB) gene cluster, is associated with the susceptibility for malocclusions in Europeans. The resulting malocclusions require orthodontic treatment. The aim of this study was to investigate the association of rs6504340 and other dentition-implicated polymorphisms with dental and occlusal traits in Korean and Japanese populations. Methods The study participants included 223 unrelated Koreans from the Busan area and 256 unrelated Japanese individuals from the Tokyo metropolitan area. DNA samples were extracted from saliva specimens. Genotyping for rs6504340 and four single nucleotide polymorphisms (SNPs) that have been shown to be associated with the timing of first tooth eruption and the number of teeth at 1 year of age (rs10506525, rs1956529, rs9674544, and rs8079702) was performed using TaqMan assays. The Index of Orthodontic Treatment Need (IOTN), overjet, overbite, arch length discrepancy, crown sizes, and length and width of the dental arches were measured. Spearman's correlation coefficients were calculated to evaluate relationships between rs6504340 and these dental/occlusal traits. Results We evaluated the aesthetic components and dental health components of the IOTN in the Korean and Japanese populations and found that neither rs6504340 nor the other four SNPs showed any association with dental and occlusal traits in these East Asian populations. Conclusions These negative results suggest that further research is needed to identify the genetic determinants of malocclusions in order to reach a consensus. PMID:24696826

Management of severe anterior open-bite in an adult patient using miniscrews as skeletal anchorage.

PubMed

Rachala, Madhukar Reddy; Harikrishnan, Pandurangan

2010-01-01

Anterior open bite is often caused by a downward rotation of the mandible and/or by excessive eruption of the posterior teeth. In such cases, it is difficult to establish absolute anchorage for molar intrusion by traditional orthodontic mechanics. This is a case report of successful treatment of a severe anterior open bite using miniscrew anchorage. A female patient of 20 yrs presented with symmetrical frontal facial appearance, increased anterior facial height, convex profile and incompetent lips. Dentally, she had lost both mandibular first molars due to caries and both maxillary first molars were extruded. She had class II canine relationship, 5 mm overjet, 5 mm anterior open bite, 3 mm mandibular midline diastema and a spacing of 2 mm in the maxillary arch. The treatment objectives were to correct the anterior open bite and establish ideal overjet and overbite and to restore the mandibular first molars with fixed prosthesis. Titanium miniscrews (1.3 mm diameter and 9 mm length) were implanted bilaterally in the maxillary arch between the second premolar and the first molar, and an intrusion force was applied with NiTi closed coil springs for 8 months. After molar intrusion, the same screws were used for en masse retraction of the entire dentition (third molars were extracted) for 4 months. The results showed that, after an active treatment of 20 months, the maxillary molars were intruded about 4 mm each and good occlusion was achieved. In conclusion, the miniscrews were very useful in the non-surgical management of adult anterior open bite cases.

Occlusal tooth wear in Chinese adults with shortened dental arches.

PubMed

Zhang, Q; Witter, D J; Bronkhorst, E M; Bartlett, D W; Creugers, N H J

2014-02-01

To assess associations between occlusal tooth wear and shortened dental arches (SDA) in Chinese 40 years and older subjects. From a sample of 1462 urban and rural adults, those presenting with SDA (n = 150) were compared with a control group of 65 randomly selected subjects with complete dentitions (CDA). Occlusal wear was assessed using a modified Smith and Knight index - the occlusal tooth wear index (OWTI) - and analysed using multivariate (logistic) regression. There was no significant effect from SDA on severe occlusal wear (OTWI score 3 or 4: OR = 2.016; 95% CI = 0.960-4.231; P = 0.064). Higher age was associated with severe occlusal wear (P values ≤0.007) and with higher mean OTWI scores; urban had less often severe occlusal wear than rural residents (OR = 0.519; P = 0.008). Higher mean OTWI scores were associated with rural residents, except for anterior teeth. Females had lower mean OTWI score for anterior teeth (effect = -0.153; P = 0.030). Premolars in SDA had higher mean OTWI scores compared with those in CDA (effect = +0.213; P = 0.006). In SDA, more posterior occluding pairs (POPs) were associated with lower mean OTWI sores for anterior teeth (effect: -0.158; P = 0.008) and higher scores for molars (effect: +0.249, P = 0.003). Subjects with SDA or CDA presented comparable occlusal wear, but premolars in SDA tend to have higher probability for having occlusal wear. Fewer numbers of POPs were associated with more wear in anterior teeth. © 2013 John Wiley & Sons Ltd.

Comparison of enamel defects in the primary and permanent dentitions of children from a low-fluoride District in Australia.

PubMed

Seow, W Kim; Ford, Daniel; Kazoullis, Stauros; Newman, Bruce; Holcombe, Trevor

2011-01-01

The purpose of this study was to compare developmental defects of enamel (DDE) in the primary and permanent dentitions of children from a low-fluoride district. A total of 517 healthy schoolchildren were examined using the modified DDE criteria. The prevalence of DDE in the primary and permanent dentition was 25% and 58%, respectively (P<.001). The mean number of teeth with enamel opacity per subject was approximately threefold compared to that affected by enamel hypoplasia (3.1±3.8 vs 0.8±1.4, P<.001 in the primary dentition and 3.6±4.7 vs 1.2±2.2, P<.001 in the permanent dentition). Demarcated opacities (83%) were predominant compared to diffuse opacities (17%), while missing enamel was the most common type of enamel hypoplasia (50%), followed by grooves (31%) and enamel pits (19%) (P=.04). In the permanent dentition, diffuse and demarcated opacities were equally frequent, while enamel grooves were the commonest type of hypoplasia (52%), followed by missing enamel (35%) and enamel pits (5%; P<.001). In a low-fluoride community, developmental defects of enamel were twice as common in the permanent dentition vs the primary dentition. In the primary dentition, the predominant defects were demarcated opacities and missing enamel, while in the permanent dentition, the defects were more variable.

Factors Associated with Dental Caries in Primary Dentition in a Non-Fluoridated Rural Community of New South Wales, Australia

PubMed Central

Arora, Amit; Manohar, Narendar

2017-01-01

Dental caries persists as one of the most prevalent chronic diseases among children worldwide. This study aims to determine factors that influence dental caries in primary dentition among primary school children residing in the rural non-fluoridated community of Lithgow, New South Wales, Australia. A total of 495 children aged 5–10 years old from all the six primary schools in Lithgow were approached to participate in a cross-sectional survey prior to implementation of water fluoridation in 2014. Following parental consent, children were clinically examined for caries in their primary teeth, and parents were requested to complete a questionnaire on previous fluoride exposure, diet and relevant socio-demographic characteristics that influence oral health. Multiple logistic regression analysis was employed to examine the independent risk factors of primary dentition caries. Overall, 51 percent of children had dental caries in one or more teeth. In the multiple logistic regression analysis, child’s age (Adjusted Odd’s Ratio (AOR) = 1.30, 95% CI: 1.14–1.49) and mother’s extraction history (AOR = 2.05, 95% CI: 1.40–3.00) were significantly associated with caries experience in the child’s primary teeth. In addition, each serve of chocolate consumption was associated with 52 percent higher odds (AOR = 1.52, 95% CI: 1.19–1.93) of primary dentition caries. PMID:29168780

Factors Associated with Dental Caries in Primary Dentition in a Non-Fluoridated Rural Community of New South Wales, Australia.

PubMed

Arora, Amit; Manohar, Narendar; John, James Rufus

2017-11-23

Dental caries persists as one of the most prevalent chronic diseases among children worldwide. This study aims to determine factors that influence dental caries in primary dentition among primary school children residing in the rural non-fluoridated community of Lithgow, New South Wales, Australia. A total of 495 children aged 5-10 years old from all the six primary schools in Lithgow were approached to participate in a cross-sectional survey prior to implementation of water fluoridation in 2014. Following parental consent, children were clinically examined for caries in their primary teeth, and parents were requested to complete a questionnaire on previous fluoride exposure, diet and relevant socio-demographic characteristics that influence oral health. Multiple logistic regression analysis was employed to examine the independent risk factors of primary dentition caries. Overall, 51 percent of children had dental caries in one or more teeth. In the multiple logistic regression analysis, child's age (Adjusted Odd's Ratio (AOR) = 1.30, 95% CI: 1.14-1.49) and mother's extraction history (AOR = 2.05, 95% CI: 1.40-3.00) were significantly associated with caries experience in the child's primary teeth. In addition, each serve of chocolate consumption was associated with 52 percent higher odds (AOR = 1.52, 95% CI: 1.19-1.93) of primary dentition caries.

Ball motion and sliding friction in an arched outer-race ball bearing

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1974-01-01

The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is analyzed. Fatigue life evaluations were made. The analysis is applied to a 150-millimeter-bore ball bearing. The results indicated that for high-speed light-load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be optimal. Also, for an arched bearing a considerable amount of spinning occurs at the outer-race contacts.

In-plane free vibration analysis of cable arch structure

NASA Astrophysics Data System (ADS)

Zhao, Yueyu; Kang, Houjun

2008-05-01

Cable-stayed arch bridge is a new type of composite bridge, which utilizes the mechanical characters of cable and arch. Based on the supporting members of cable-stayed arch bridge and of erection of arch bridge using of the cantilever construction method with tiebacks, we propose a novel mechanical model of cable-arch structure. In this model, the equations governing vibrations of the cable-arch are derived according to Hamilton's principle for dynamic problems in elastic body under equilibrium state. Then, the program of solving the dynamic governing equations is ultimately established by the transfer matrix method for free vibration of uniform and variable cross-section, and the internal characteristics of the cable-arch are investigated. After analyzing step by step, the research results approve that the program is accurate; meanwhile, the mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Combined maxillary and mandibular distraction osteogenesis in patients with hemifacial microsomia.

PubMed

Sant'Anna, Eduardo Franzotti; Lau, Geórgia W T; Marquezan, Mariana; de Souza Araújo, Mônica Tirre; Polley, John W; Figueroa, Alvaro A

2015-05-01

Hemifacial microsomia is a deformity of variable expressivity with unilateral hypoplasia of the mandible and the ear. In this study, we evaluated skeletal soft tissue changes after bimaxillary unilateral vertical distraction. Eight patients (4 preadolescents 4 adolescents) each with a grade II mandibular deformity underwent a LeFort I osteotomy and an ipsilateral horizontal mandibular ramus osteotomy. A semiburied distraction device was placed over the ramus, and intermaxillary fixation was applied. Anteroposterior cephalometric and frontal photographic analyses were conducted before and after distraction. Statistics were used to analyze the preoperative and postoperative changes. Cephalometrically, the nasal floor and the occlusal and gonial plane angles decreased. The ratios of affected-unaffected ramus and gonial angle heights improved by 15% and 20%, respectively. The position of menton moved toward the midline. The photographic analysis showed a decrease of the nasal and commissure plane angles, and the chin moved to the unaffected side. The parallelism between the horizontal skeletal and soft tissue planes improved, with an increase in the affected side ramus height and correction of the chin point toward the midline. Simultaneous maxillary and mandibular distraction improved facial balance and symmetry. Patients in the permanent dentition with fixed orthodontic appliances and well-aligned dental arches responded well to this intervention. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

A Longitudinal Study of the Presence of Dental Anomalies in the Primary and Permanent Dentitions of Cleft Lip and/or Palate Patients.

PubMed

Suzuki, Akira; Nakano, Masayuki; Yoshizaki, Keigo; Yasunaga, Atsushi; Haruyama, Naoto; Takahashi, Ichiro

2017-05-01

  The aim is to survey primary and permanent dental anomalies: hypodontia, microdontia, a supernumerary tooth, and fused teeth in patients with cleft lip and/or palate.   Retrospective longitudinal study Subjects :  The subjects were selected from all 1724 patients with cleft lip and/or palate who were registered at the orthodontic clinic of Kyushu University Hospital, Fukuoka, Japan, from 1970 to 2009. Finally, 994 subjects were evaluated for primary dentition, 1352 for permanent dentition, and 871 for the longitudinal changes from primary to permanent dentition.   The prevalence of dental anomalies was compared for each tooth type, among various cleft types, between males and females, and between the alveolar cleft area and the noncleft area.   The prevalence of hypodontia was 16.2% for primary dentition and 52.7% for permanent dentition in the subjects with cleft lip and/or palate. Hypodontia increased with the severity of the cleft type. Multiple hypodontia was found more frequently in the subjects with bilateral cleft lip and palate and the subjects with unilateral cleft lip and palate. Microformed lateral incisors were found in 22.7% of permanent lateral incisors but not in primary dentition. Supernumerary teeth were found in 17.7% of the subjects with cleft lip and/or palate for primary maxillary dentition and in 5.7% for permanent maxillary dentition.   The prevalence of hypodontia was greater in permanent dentition than in primary dentition; although, it was not much different between males and females or between the right and left sides. The prevalence of dental anomalies was significantly different among four groups by cleft type: cleft lip, cleft lip and alveolus, cleft lip and palate, and cleft palate.

Does powdering of the dentition increase the accuracy of fusing 3D stereophotographs and digital dental casts.

PubMed

Rangel, Frits A; Chiu, Yu-Ting; Maal, Thomas J J; Bronkhorst, Ewald M; Bergé, Stefaan J; Kuijpers-Jagtman, Anne Marie

2016-08-01

The shiny vestibular surfaces of teeth make it difficult to match digital dental casts to 3D stereophotogrammetric images of patient teeth. This study tested whether reducing this shininess by coating the teeth with titanium-oxide powder might improve the accuracy of the matching procedure. Twenty patients participated in the study. For each patient, 3D stereophotogrammetric images were taken without and with a powder coating. Separately, digital dental casts were created. Next, the digital dental casts were fused with the 3D stereophotogrammetric images of either non-powdered or powdered dentition. Distance maps were created to evaluate the inter-surface distance between the digital dental cast and the 3D images. The matching accuracy was compared for dentition with and without powdering. Of all recorded distances between corresponding points, 95% was smaller than 0.84mm for the powdered dentition and smaller than 0.90mm for the non-powdered dentition. Although powdered dentition showed significantly better matching than non-powdered dentition, the difference was less than 0.1mm. Intra-observer statistics showed that five out of 24 repetitions gave significantly different results, but only for dentition that was not powdered. The patients did not have any major malocclusions. Severe malocclusions might cause greater difficulty in matching the dentition without powder. Only one type of powder was used, but it effectively reduced shininess. Powdering the dentition had a small, but significant, positive effect on matching. However, this effect was of minor clinical importance. Therefore, we do not recommend powdering the dentition for 3D stereophotogrammetric images used for matching procedures. © The Author 2016. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Comparison between rapid and mixed maxillary expansion through an assessment of arch changes on dental casts.

PubMed

Grassia, Vincenzo; d'Apuzzo, Fabrizia; Jamilian, Abdolreza; Femiano, Felice; Favero, Lorenzo; Perillo, Letizia

2015-01-01

Aim of this retrospective observational study was to compare upper and lower dental changes in patients treated with Rapid Maxillary Expansion (RME) and Mixed Maxillary Expansion (MME), assessed by dental cast analysis. Treatment groups consisted of 42 patients: the RME group (n = 21) consisted of 13 female and 8 male subjects with the mean age of 8.8 years ± 1.37 at T0 and 9.6 years ± 1.45 at T1; the MME group (n = 21) consisted of 12 female and 9 male patients with a mean age of 8.9 years ± 2.34 at T0 and 10.5 years ± 2.08 at T1. The upper and lower arch analysis was performed on four dental bilateral landmarks, on upper and lower casts; also upper and lower arch depths were measured. The groups were compared using independent sample t-test to estimate dental changes in upper and lower arches. Before expansion treatment (T0), the groups were similar for all examined variables (p>0.05). In both RME and MME group, significant increments in all the variables for maxillary and mandibular arch widths were observed after treatment. No significant differences in maxillary and mandibular arch depths were observed at the end of treatment in both groups. An evaluation of the changes after RME and MME (T1) showed statistically significant differences in mandibular arch depth (p<0.001) and maxillary intercanine widths (p<0.05). Differences in maxillary arch depth and arch width measurements were not significant. RME and MME can be considered two effective treatment options to improve transverse arch dimensions and gain space in the dental arches. A greater lower arch expansion was observed in the MME group, which might be attributed to the "lip bumper effects" observed in the MME protocol.

Ball motion and sliding friction in an arched outer race ball bearing

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1973-01-01

The motion of the ball and sliding friction in an arched outer race ball bearing under thrust loads is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.

Ball motion and sliding friction in an arched outer race ball bearing

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1974-01-01

The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.

Association between education level and dentition status in Japanese adults: Japan public health center-based oral health study.

PubMed

Ueno, Masayuki; Ohara, Satoko; Inoue, Manami; Tsugane, Shoichiro; Kawaguchi, Yoko

2012-12-01

The aim of this study was to examine whether there is an educational gradient in dentition status among Japanese adults who are under the universal public health insurance system. Subjects were 1201 community residents aged 55-75 years as of May 2005 who completed a self-administered questionnaire and had a standard clinical oral examination. Analysis focused on the association of three education levels (junior high school, senior high school, and any college or higher education) with dentition status. The proportion of subjects with 20 or more teeth (P < 0.001), number of teeth present (P = 0.037), number of filled teeth (P = 0.016), and two types of functional tooth units (FTUs): FTUs with natural teeth (n-FTUs) (P < 0.001) and FTUs with natural teeth and artificial teeth on implant-supported and fixed prostheses (nif-FTUs) (P < 0.001) were significantly associated with education level after adjusting for confounders. The significant trend of these values in dental indexes indicated a poorer dentition status with a lower education level. The results suggest that the level of education has an independent impact on dentition status in a group of Japanese adults, even after taking into account oral health-related factors. Therefore, providing appropriate oral health information from an early age within a compulsory school education program appears necessary to enhance health literacy and lessen the inequalities in dental health by educational level. © 2012 John Wiley & Sons A/S.

Impact of oral health behaviours and oral habits on the number of remaining teeth in older Taiwanese dentate adults.

PubMed

Hsu, Kun-Jung; Yen, Yea-Yin; Lan, Shou-Jen; Wu, Yi-Min; Lee, Huey-Er

2013-01-01

To evaluate the impact of oral health behaviours and oral habits on the number of remaining teeth in older Taiwanese dentate adults. Subjects comprised dentate patients (mean age, 60.0 ± 9.9 years) in Taiwan. Information on demographic data, oral health behaviours, oral habits and self-perceived health status was collected via self-administered questionnaires and dentition status was assessed by oral examination. Multiple logistic regression analyses were used to determine variables correlated with the low dentition group (subjects with less than 20 natural teeth or 8 functional tooth units). The analysis showed that the low dentition group was more likely to be older and to exhibit low educational levels, less frequent use of dental floss, more common smoking habits, poor self-perceived dental health and to be exbetel- nut chewers. In addition, the low dentition group was less likely to be current betel-nut chewers. These results underscore the importance of the use of dental floss and confirm the adverse effects of smoking on dental health. Hence, the dental profession should continue to encourage proper oral health behaviours and oral habits.

Condylar motion in children with primary dentition during lateral excursion.

PubMed

Yamasaki, Youichi; Hayasaki, Haruaki; Nishi, Megumi; Nakata, Shiho; Nakata, Minoru

2002-07-01

Normal development of primary and mixed dentition is indispensable for establishing a healthy mandibular function of the permanent dentition. Because condylar movements are crucial for mandibular function, extensive studies have been reported. However, most of these studies have dealt with mandibular functions in adults, and there is less known about children with primary dentition. The purpose of this study was to clarify the condylar movements during lateral excursions in children with primary dentition and compare these movements with those of adults from the viewpoint of functional development. With use of an optoelectronic recording system with six degrees of freedom, the lateral excursions of 24 children and 20 young women, with sound dentition, were recorded at 100 Hz. The results show that the balancing side condyle of the children had a significantly smaller vertical excursion and a significantly larger anteroposterior excursion than that of adults, indicating the shallower and more anteriorly directed movements of the entire mandible during lateral excursions in children with primary dentition.

[Study on the indexes of forensic identification by the occlusal-facial digital radiology].

PubMed

Gao, Dong; Wang, Hu; Hu, Jin-liang; Xu, Zhe; Deng, Zhen-hua

2006-02-01

To discuss the coding of full dentition with 32 locations and measure the characteristics of some bony indexes in occlusal-facial digital radiology (DR). To select randomly three hundred DR orthopantomogram and code the full dentition, then analyze the diversity of dental patterns. To select randomly one hundred DR lateral cephalogram and measure six indexes (N-S,N-Me,Cd-Gn,Cd-Go,NP-SN,MP-SN) separately by one odontologist and one trained forensic graduate student, then calculate the coefficient variation (CV) of every index and take a correlation analysis for the consistency between two measurements. (1) The total diversity of 300 dental patterns was 75%.It was a very high value. (2)All six quantitative variables had comparatively high CV value.(3) After the linear correlation analysis between two measurements, all six coefficient correlations were close to 1. This indicated that the measurements were stable and consistent. The method of coding full dentition in DR orthopantomogram and measuring six bony indexes in DR lateral cephalogram can be used to forensic identification.

Construction Simulation Analysis of 60m-span Concrete Filled Steel Tube arch bridge

NASA Astrophysics Data System (ADS)

Shi, Jing Xian; Ding, Qing Hua

2018-06-01

The construction process of the CFST arch bridge is complicated. The construction process not only affects the structural stress in the installation, but also determines the form a bridge and internal force of the bridge. In this paper, a 60m span concrete filled steel tube tied arch bridge is taken as the background, and a three-dimensional finite element simulation model is established by using the MIDAS/Civil bridge structure analysis software. The elevation of the main arch ring, the beam stress, the forces in hanger rods and the modal frequency of the main arch during the construction stage are calculated, and the construction process is simulated and analyzed. Effectively and reasonably guide the construction and ensure that the line and force conditions of the completed bridge meet the design requirements and provides a reliable technical guarantee for the safe construction of the bridge.

Relationship between lumbar changes and modifications in the plantar arch in women with low back pain.

PubMed

Borges, Cláudia Dos Santos; Fernandes, Luciane Fernanda Rodrigues Martinho; Bertoncello, Dernival

2013-05-01

: Evaluate the probable relationship among plantar arch, lumbar curvature, and low back pain. : Fifteen healthy women were assessed taking in account personal data and anthropometric measurements, photopodoscopic evaluation of the plantar arch, and biophotogrammetric postural analysis of the patient (both using the SAPO software), as well as evaluation of lumbar pain using a Visual Analog Scale (VAS). The average age of the participants was 30.45 (±6.25) years. : Of the feet evaluated, there were six individuals with flat feet, five with high arch, and four with normal feet. All reported algic syndrome in the lumbar spine, with the highest VAS values for the volunteers with high arch. Correlation was observed between the plantar arch and the angle of the lumbar spine (r = -0.71, p = 0.004) CONCLUSION: High arch was correlated with more intense algic syndrome, while there was moderate positive correlation between flat foot and increased lumbar curvature, and between high arch and lumbar correction. Level of Evidence IV. Case Series .

Dentition status, malnutrition and mortality among older service housing residents.

PubMed

Saarela, R K T; Soini, H; Hiltunen, K; Muurinen, S; Suominen, M; Pitkälä, K

2014-01-01

Oral health status and oral health problems can affect eating habits and thus consequently the nutritional status of frail older people. To assess older service house residents' dentition and its associations with nutritional status and eating habits, and as well as to explore the prognostic value of dentition status for mortality. A cross-sectional study with a three-year follow-up. In 2007, we assessed the nutritional status of all residents in service houses in the two cities of Helsinki and Espoo in Finland (N=2188). Altogether 1475 subjects (67%) participated in the study; dentition status data were available for 1369 of them. Using a personal interview and assessment, trained nurses familiar to the resident collected the subjects' demographic data, medical history, functional and cognitive status, information on dentition status, oral symptoms, eating habits and diets. We assessed nutritional status with the Mini Nutritional Assessment (MNA), and retrieved information on mortality from central registers on 6 July 2010. Edentulousness was common; more than half of the residents (52%) had lost all their teeth: 7% (n=94) were totally edentulous without prosthesis (Group 1), 45% (n=614) had removable dentures (Group 2), and 48% (n = 661) of the residents, had some natural teeth left (Group 3). Dentition status was associated with age, gender, education and disability. According to the MNA, 13% were malnourished, 65% were at risk for malnutrition, and 22% were well nourished. Edentulousness without prosthesis was associated with malnutrition, oral symptoms and infrequent use of oral care services. In Group 1, 52% were deceased during follow-up period. The respective figures for Groups 2 and 3 were 48% and 40% (p=0.004). However, in Cox regression analysis adjusted for age, gender, comorbidity and MNA score, dentition status no longer predicted mortality. Edentulousness is still common among older service housing residents. Edentulousness without prosthesis was associated with poor nutritional status, oral symptoms and infrequent use of dental services. These findings suggest the need for co-operation between nursing staff and oral care services.

Increased medial longitudinal arch mobility, lower extremity kinematics, and ground reaction forces in high-arched runners.

PubMed

Williams, D S Blaise; Tierney, Robin N; Butler, Robert J

2014-01-01

Runners with high medial longitudinal arch structure demonstrate unique kinematics and kinetics that may lead to running injuries. The mobility of the midfoot as measured by the change in arch height is also suspected to play a role in lower extremity function during running. The effect of arch mobility in high-arched runners is an important factor in prescribing footwear, training, and rehabilitating the running athlete after injury. To examine the effect of medial longitudinal arch mobility on running kinematics, ground reaction forces, and loading rates in high-arched runners. Cross-sectional study. Human movement research laboratory. A total of 104 runners were screened for arch height. Runners were then identified as having high arches if the arch height index was greater than 0.5 SD above the mean. Of the runners with high arches, 11 rigid runners with the lowest arch mobility (R) were compared with 8 mobile runners with the highest arch mobility (M). Arch mobility was determined by calculating the left arch height index in all runners. Three-dimensional motion analysis of running over ground. Rearfoot and tibial angular excursions, eversion-to-tibial internal-rotation ratio, vertical ground reaction forces, and the associated loading rates. Runners with mobile arches exhibited decreased tibial internal-rotation excursion (mobile: 5.6° ± 2.3° versus rigid: 8.0° ± 3.0°), greater eversion-to-tibial internal-rotation ratio (mobile: 2.1 ± 0.8 versus rigid: 1.5 ± 0.5), decreased second peak vertical ground reaction force values (mobile: 2.3 ± 0.2 × body weight versus rigid: 2.4 ± 0.1 × body weight), and decreased vertical loading rate values (mobile: 55.7 ± 14.1 × body weight/s versus rigid: 65.9 ± 11.4 × body weight/s). Based on the results of this study, it appears that runners with high arch structure but differing arch mobility exhibited differences in select lower extremity movement patterns and forces. Future authors should investigate the impact of arch mobility on running-related injuries.

Further delineation of the SATB2 phenotype

PubMed Central

Döcker, Dennis; Schubach, Max; Menzel, Moritz; Munz, Marita; Spaich, Christiane; Biskup, Saskia; Bartholdi, Deborah

2014-01-01

SATB2 is an evolutionarily highly conserved chromatin remodeling gene located on chromosome 2q33.1. Vertebrate animal models have shown that Satb2 has a crucial role in craniofacial patterning and osteoblast differentiation, as well as in determining the fates of neuronal projections in the developing neocortex. In humans, chromosomal translocations and deletions of 2q33.1 leading to SATB2 haploinsufficiency are associated with cleft palate (CP), facial dysmorphism and intellectual disability (ID). A single patient carrying a nonsense mutation in SATB2 has been described to date. In this study, we performed trio-exome sequencing in a 3-year-old girl with CP and severely delayed speech development, and her unaffected parents. Previously, the girl had undergone conventional and molecular karyotyping (microarray analysis), as well as targeted analysis for different diseases associated with developmental delay, including Angelman syndrome, Rett syndrome and Fragile X syndrome. No diagnosis could be established. Exome sequencing revealed a de novo nonsense mutation in the SATB2 gene (c.715C>T; p.R239*). The identification of a second patient carrying a de novo nonsense mutation in SATB2 confirms that this gene is essential for normal craniofacial patterning and cognitive development. Based on our data and the literature published so far, we propose a new clinically recognizable syndrome – the SATB2-associated syndrome (SAS). SAS is likely to be underdiagnosed and should be considered in children with ID, severe speech delay, cleft or high-arched palate and abnormal dentition with crowded and irregularly shaped teeth. PMID:24301056

Lingual eruption of mandibular permanent incisors: a space correlated phenomenon?

PubMed

Aminabadi, Naser Asl; Farahani, Ramin Mostofi Zadeh; Sohrabi, Aydin; Pouralibaba, Firuz

2009-01-01

The aim of the present study was to investigate the prevalence and distribution according to various arch length conditions of lingually erupted mandibular permanent incisors and the effect of space condition on this phenomenon with long-term follow-up of these teeth. A total of 105 children aged 5-7.5 years with one or more permanent mandibular incisors erupting lingual to the corresponding primary incisors were included in the study. A space analysis was performed. The subjects were divided into six groups according to various space conditions. The subjects were followed for 2 years. In this study the prevalence of lingual eruption was 18.4%. Eighty-three point seven percent of the subjects had either equivalent space, mild space excess, or a space deficiency (not more than 3 mm). No relationship was found between groups and clinical outcomes (P>.05). Follow up of the main three groups (according to the space analysis results) revealed in the adequate space group 75% of the children lost their primary incisors without any intervention. Similar outcomes occurred in 85.7% and 57.14% of cases in the mild space excess and space deficiency groups, respectively. Considering the three main groups combined, equivalent space, mild space excess, and mild space deficiency, 70.45% of children lost their primary incisors without any intervention and 14.8% needed primary incisor extraction (17.4%, 14.3%, and 10.7% in each group, respectively). There was no predisposition toward a space deficiency or excess found in these subjects so the wait-and-see policy versus early extraction can be considered for lingually erupting permanent mandibular incisors. Lingual eruption of mandibular incisors is a common clinical problem in the early mixed dentition period that is a source of discomfort for parents of patients with this condition. The present study provides a unique insight into the prevalence of the problem as well as the clinical decisions such as favoring retention of primary incisors as long as possible, the extraction of these primary teeth, placement of lower lingual holding arches, or referral for comprehensive orthodontic treatment. These types of data should not be regarded as standards but as illustrative of several key factors that are still not well-understood or which are still ignored.

Overhead spine arch analysis of dairy cows from three-dimensional video

NASA Astrophysics Data System (ADS)

Abdul Jabbar, K.; Hansen, M. F.; Smith, M. L.; Smith, L. N.

2017-02-01

We present a spine arch analysis method in dairy cows using overhead 3D video data. This method is aimed for early stage lameness detection. That is important in order to allow early treatment; and thus, reduce the animal suffering and minimize the high forecasted financial losses, caused by lameness. Our physical data collection setup is non-intrusive, covert and designed to allow full automation; therefore, it could be implemented on a large scale or daily basis with high accuracy. We track the animal's spine using shape index and curvedness measure from the 3D surface as she walks freely under the 3D camera. Our spinal analysis focuses on the thoracic vertebrae region, where we found most of the arching caused by lameness. A cubic polynomial is fitted to analyze the arch and estimate the locomotion soundness. We have found more accurate results by eliminating the regular neck/head movements' effect from the arch. Using 22-cow data set, we are able to achieve an early stage lameness detection accuracy of 95.4%.

Effect of section properties on load carrying capacity of 10m span precast concrete closed spandrel arch bridge with corrugated section

NASA Astrophysics Data System (ADS)

Ong, Chong Yong; Choong, Kok Keong; Miralimov, Mirzakhid

2017-10-01

Various precast concrete arch bridge systems have been developed since 1960's. The reinforced concrete section of these systems is solid rectangular which is not an efficient section. Inspired by the nature of banana tree trunk, a relatively new corrugated section of precast concrete arch bridge was introduced and patented in Malaysia in 2008. This folded plate section is an open section which tends to open under vehicular loading. Hence, effect of section properties on load carrying capacity of precast concrete closed spandrel arch bridge with corrugated section under vehicle loading is presented in this paper. The arch bridge model has a clear span of 10m with 2.5m, 3.0m and 3.5m clear rise. For the corrugated section dimension model, overall depth varies from 475mm to 575mm, top and bottom flange thickness varies from 135mm to 155mm and web thickness varies from 90mm to 120mm. Linear and non-linear computational analysis are carried out using 2D PLAXIS software (in longitudinal direction) and LUSAS software (in transverse direction). In longitudinal direction, the sagging moment in non-linear analysis increases approximately 18% compared to linear analysis for different rise span ratio. From the analysis results, as the rise of arch increases, the sagging moment and hogging moment increases, but the axial force decreases. Besides, as the overall depth of corrugated section increases, the internal forces of the arch also increase. In transverse direction, the maximum tensile stress of concrete at crown and haunch decreases as slenderness ratio increases.

Association of Dermatoglyphic Peculiarities with Dental Caries in Preschool Children of Lucknow, India

PubMed Central

Saha, Sabyasachi; Jagannath, GV; Singh, Sanjay; Saha, Sonali; Garg, Nishita

2016-01-01

ABSTRACT Background: Dermatoglyphics refers to study of the intricate dermal ridge configurations on the skin covering the palmar and plantar surfaces of hand and feet. The basis of considering dermatoglyphic patterns as genetic marker for dental caries is that the epithelium of finger buds as well as enamel has ectodermal origin, and both develop at the same time of intrauterine life. Aim: To assess the relationship between fingerprint patterns and dental caries among preschool children of Lucknow city. Study design: This study was of cross-sectional design. Materials and methods: The study group comprised 512 preschool children 2-6 years of age. The prevalence of caries was recorded using "Dentition status and treatment needs" (WHO basic oral health assessment form, 1997). They were divided into three groups as follows: Group I (dmft score = 0-2), group II (dmft score = 3-4) and group III (dmft score ≥5). The handprints of each child were taken using a stamp pad. The fingertip patterns were analyzed according to the classical method and were classified according to the topological method. The frequency of occurrence of type of dermatoglyphic pattern on fingertip of each digit was noted. Statistics: Chi-square test was used to test the significant difference in proportions. Means were compared using Student’s t-test and analysis of variance (ANOVA) or F-test. Results: Subjects belonging to groups II and III showed maximum occurrence of whorl pattern on all digits. Group I subjects had maximum occurrence of arch pattern. All the variables had statistically significant value, with a degree of divergence of specific dermatoglyphic patterns among all three groups. Conclusion: The dental caries susceptibility of an individual increased with incidence of whorl pattern and it decreased with incidence of arch pattern. How to cite this article: Singh E, Saha S, Jagannath GV, Singh S, Saha S, Garg N. Association of Dermatoglyphic Peculiarities with Dental Caries in Preschool Children of Lucknow, India. Int J Clin Pediatr Dent 2016;9(1):39-44. PMID:27274154

Stigmatized Biologies: Examining the Cumulative Effects of Oral Health Disparities for Mexican American Farmworker Children

PubMed Central

Horton, Sarah; Barker, Judith C.

2012-01-01

Severe early childhood caries (ECC) can leave lasting effects on children’s physical development, including malformed oral arches and crooked permanent dentition. This article examines the way that ECC sets up Mexican American farm worker children in the United States for lasting dental problems and social stigma as young adults. We examine the role of dietary and environmental factors in contributing to what we call “stigmatized biologies,” and that of market-based dental public health insurance systems in cementing their enduring effects. We adapt Margaret Lock’s term, local biology, to illustrate the way that biology differs not only because of culture, diet, and environment but also because of disparities in insurance coverage. By showing the long-term effects of ECC and disparate dental treatment on farmworker adults, we show how the interaction of immigrant caregiving practices and underinsurance can have lasting social effects. An examination of the long-term effects of farm worker children’s ECC illustrates the ways that market-based health care systems can create embodied differences that in turn reproduce a system of social inequality. PMID:20550093

An alternative technique in the treatment of anterior cross bite in a case of Nickel allergy: a case report.

PubMed

Giancotti, A; Mozzicato, P; Mampieri, G

2011-03-01

The objective of this paper is to show an alternative use of an Essix based appliance in the treatment of anterior single-tooth crossbite malocclusion in a patient with Nickel allergy. Anterior crossbite malocclusion of one or more teeth, without posterior crossbite association, is a relatively frequent condition both in the mixed and the permanent dentition. This kind of malocclusion is usually treated with either fixed or removable appliances. The use of preformed Essix appliances could be an alternative to traditional removable and fixed orthodontic devices in patients with Nickel allergy as well as in every patient. The treatment was successfully completed in 12 weeks, the anterior single tooth crossbite was corrected using three full arch Essix-based appliances planned on the set-up casting, providing a gradual vestibular movement. Patient compliance was requested in order to provide the planned dental movement. The Essix appliance can be successfully used to correct a single-tooth crossbite even in allergic subjects in a short time with patient cooperation.

A Comparative Evaluation of Accuracy of the Dies Affected by Tray Type, Material Viscosity, and Pouring Sequence of Dual and Single Arch Impressions- An In vitro Study

PubMed Central

Kulkarni, Rahul S.; Shah, Rupal J.; Chhajlani, Rahul; Saklecha, Bhuwan; Maru, Kavita

2017-01-01

Introduction The clinician’s skill, impression techniques, and materials play a very important role in recording fine details in an impression for accuracy of fixed partial denture prosthesis. Impression of prepared teeth and of the opposing arch can be recorded simultaneously by dual-arch trays, while the full arch metal trays are used for impressions of prepared teeth in one arch. Aim To measure and compare the accuracy of working dies made from impressions with metal and plastic dual arch trays and metal full arch trays, for two viscosities of impression material and by changing the sequence of pour of working and non-working sides. Materials and Methods A balanced design with independent samples was used to study the three variables (tray type, impression material viscosity, and pouring sequence). An impression made by dual arch trays and single arch trays were divided in to three groups (Group A-plastic dual arch tray, Group B-metal dual arch tray, Group C-full arch metal stock tray). Out of these three groups, two groups (Group A and B) were subdivided in to four subgroups each and one group (Group C) was subdivided in to two subgroups. A sample size of 30 was used in each subgroup yielding a total 300 impressions in three groups or ten subgroups. Impressions were made of a machined circular stainless steel die. All three dimensions (Occlusogingival, Mesiodistal, and Buccolingual) of the working dies as well as stainless steel standard die were measured three times, and the mean was used for the three standard sample values to which all working dies means were compared. Statistical analysis used for this study was a 3-factor analysis of variance with hypothesis testing at α =0.05. Results With respect to the selection of impression material viscosity statistically significant differences were found in the dies for the buccolingual and mesiodistal dimensions. Metal dual arch trays were slightly more accurate in the mesiodistal dimension in comparison to the plastic trays in reference of tray selection and in view of pouring sequence no differences were observed in occlusogingival dimension but in buccolingual and mesiodistal dimensions nonworking side was more accurate. Conclusion The gypsum dies produced from the dual arch impressions were generally smaller in all three dimensions than the stainless steel standard die. Plastic dual-arch trays were more accurate with rigid impression material and there was not statistically significant difference for sequence of pouring. Metal dual-arch trays were more accurate with monophase impression material and working side was more accurate. Stock metal full arch trays were more accurate for monophase impression material. PMID:28571280

The reliability and validity of measurements of human dental casts made by an intra-oral 3D scanner, with conventional hand-held digital callipers as the comparison measure.

PubMed

Rajshekar, Mithun; Julian, Roberta; Williams, Anne-Marie; Tennant, Marc; Forrest, Alex; Walsh, Laurence J; Wilson, Gary; Blizzard, Leigh

2017-09-01

Intra-oral 3D scanning of dentitions has the potential to provide a fast, accurate and non-invasive method of recording dental information. The aim of this study was to assess the reliability of measurements of human dental casts made using a portable intra-oral 3D scanner appropriate for field use. Two examiners each measured 84 tooth and 26 arch features of 50 sets of upper and lower human dental casts using digital hand-held callipers, and secondly using the measuring tool provided with the Zfx IntraScan intraoral 3D scanner applied to the virtual dental casts. The measurements were repeated at least one week later. Reliability and validity were quantified concurrently by calculation of intra-class correlation coefficients (ICC) and standard errors of measurement (SEM). The measurements of the 110 landmark features of human dental casts made using the intra-oral 3D scanner were virtually indistinguishable from measurements of the same features made using conventional hand-held callipers. The difference of means as a percentage of the average of the measurements by each method ranged between 0.030% and 1.134%. The intermethod SEMs ranged between 0.037% and 0.535%, and the inter-method ICCs ranged between 0.904 and 0.999, for both the upper and the lower arches. The inter-rater SEMs were one-half and the intra-method/rater SEMs were one-third of the inter-method values. This study demonstrates that the Zfx IntraScan intra-oral 3D scanner with its virtual on-screen measuring tool is a reliable and valid method for measuring the key features of dental casts. Copyright © 2017 Elsevier B.V. All rights reserved.

Knowledge, perceptions and clinical application of the shortened dental arch concept among Malaysian government dentists.

PubMed

Kasim, Siti Kamilah Mohd; Razak, Ishak Abdul; Yusof, Zamros Yuzadi Mohd

2018-02-01

To assess the knowledge and perceptions of Malaysian government dentists regarding the shortened dental arch (SDA) concept and its application in clinical practice. The SDA concept refers to a specific type of dentition with intact anterior teeth and a reduction in posterior occlusal pairs. Dentists' knowledge and perceptions of the SDA concept can influence its application in clinical practice. A self-administered questionnaire on the SDA concept was distributed to 326 government dentists in the states of Selangor and Kuala Lumpur, Malaysia. The data were analysed using SPSS version 22 software. The response rate was 84.0%. The majority of respondents had good knowledge on five of six knowledge items and good attitudes towards 10 of 17 perception items. However, only one-fifth (20.4%) reported having applied the SDA concept in the clinic. A larger number of participants who graduated locally than who graduated abroad perceived that patients <60 years of age, without molar support, can attain acceptable chewing function and that SDA treatment does not lead to loss of occlusal vertical dimension (P < 0.05). A larger number of participants with ≤5 years of work experience than with >5 years of work experience perceived that the SDA concept enables simpler treatment planning (P < 0.05). Finally, a larger number of participants who graduated abroad than who graduated locally observed that patients without molar support had temporomandibular joint problems (P < 0.05). Although Malaysian government dentists have good knowledge and perceptions of the SDA concept, it is not widely applied in the clinic. Concerted efforts in SDA training of dentists are needed to help to shorten denture waiting lists and reduce costs. © 2017 FDI World Dental Federation.

The survival of direct composite restorations in the management of severe tooth wear including attrition and erosion: A prospective 8-year study.

PubMed

Milosevic, A; Burnside, G

2016-01-01

Survival of directly placed composite to restore worn teeth has been reported in studies with small sample sizes, short observation periods and different materials. This study aimed to estimate survival for a hybrid composite placed by one clinician up to 8-years follow-up. All patients were referred and recruited for a prospective observational cohort study. One composite was used: Spectrum(®) (DentsplyDeTrey). Most restorations were placed on the maxillary anterior teeth using a Dahl approach. A total of 1010 direct composites were placed in 164 patients. Mean follow-up time was 33.8 months (s.d. 27.7). 71 of 1010 restorations failed during follow-up. The estimated failure rate in the first year was 5.4% (95% CI 3.7-7.0%). Time to failure was significantly greater in older subjects (p=0.005) and when a lack of posterior support was present (p=0.003). Bruxism and an increase in the occlusal vertical dimension were not associated with failure. The proportion of failures was greater in patients with a Class 3 or edge-to-edge incisal relationship than in Class 1 and Class 2 cases but this was not statistically significant. More failures occurred in the lower arch (9.6%) compared to the upper arch (6%) with the largest number of composites having been placed on the maxillary incisors (n=519). The worn dentition presents a restorative challenge but composite is an appropriate restorative material. This study shows that posterior occlusal support is necessary to optimise survival. Copyright © 2015 Elsevier Ltd. All rights reserved.

Relationship between lumbar changes and modifications in the plantar arch in women with low back pain

PubMed Central

Borges, Cláudia dos Santos; Fernandes, Luciane Fernanda Rodrigues Martinho; Bertoncello, Dernival

2013-01-01

OBJECTIVE : Evaluate the probable relationship among plantar arch, lumbar curvature, and low back pain. METHODS : Fifteen healthy women were assessed taking in account personal data and anthropometric measurements, photopodoscopic evaluation of the plantar arch, and biophotogrammetric postural analysis of the patient (both using the SAPO software), as well as evaluation of lumbar pain using a Visual Analog Scale (VAS). The average age of the participants was 30.45 (±6.25) years. RESULTS : Of the feet evaluated, there were six individuals with flat feet, five with high arch, and four with normal feet. All reported algic syndrome in the lumbar spine, with the highest VAS values for the volunteers with high arch. Correlation was observed between the plantar arch and the angle of the lumbar spine (r = -0.71, p = 0.004) Conclusion: High arch was correlated with more intense algic syndrome, while there was moderate positive correlation between flat foot and increased lumbar curvature, and between high arch and lumbar correction. Level of Evidence IV. Case Series. PMID:24453656

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

PubMed

Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

2018-01-01

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Isogeometric analysis: a powerful numerical tool for the elastic analysis of historical masonry arches

NASA Astrophysics Data System (ADS)

Cazzani, Antonio; Malagù, Marcello; Turco, Emilio

2016-03-01

We illustrate a numerical tool for analyzing plane arches such as those frequently used in historical masonry heritage. It is based on a refined elastic mechanical model derived from the isogeometric approach. In particular, geometry and displacements are modeled by means of non-uniform rational B-splines. After a brief introduction, outlining the basic assumptions of this approach and the corresponding modeling choices, several numerical applications to arches, which are typical of masonry structures, show the performance of this novel technique. These are discussed in detail to emphasize the advantage and potential developments of isogeometric analysis in the field of structural analysis of historical masonry buildings with complex geometries.

Dental anomalies in primary dentition and their corresponding permanent teeth.

PubMed

Gomes, R R; Fonseca, J A C; Paula, L M; Acevedo, A C; Mestrinho, H D

2014-05-01

The objectives of this paper are to estimate the prevalence of dental anomalies in primary dentition in a sample of 2- to 5-year-old Brazilian preschool children, determine their distribution, and investigate their occurrence in the succedaneous teeth of the sample compared with a control group of children with no dental anomalies in the primary dentition. The one-stage sample comprised 1,718 two to five-year-old children with fully erupted primary dentition clinically examined for dental anomalies. All children presenting dental anomalies underwent panoramic radiographs. Descriptive statistics were performed for the studied variables. A control group matched by sex and age was studied to compare the prevalence ratio for dental anomalies in the permanent dentition. The prevalence of dental anomalies in the primary dentition was 1.8 %, with no significant statistical difference between sexes. Double teeth were the most frequently observed. Dental anomalies on the succedaneous permanent teeth were diagnosed in 54.8 % of the children with affected primary dentition. The prevalence ratio (PR) for dental anomalies in the succedaneous permanent teeth was 17.1 (confidence interval (CI) 5.33-54.12) higher compared with the control group, higher in children with bilateral anomalies (PR = 31.2, CI 10.18-94.36). An association between anomalies of the permanent dentition and the presence of dental anomalies in primary teeth was observed, especially when they occur bilaterally. The results in the present study have a clinical relevance in the diagnosis of children with dental anomalies in primary dentition. Early identification of these anomalies can aid the dentist in planning dental treatment at the appropriate time.

Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study

PubMed Central

D’Souza, Ivor M; Kumar, H. C. Kiran; Shetty, K. Sadashiva

2015-01-01

Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females) were selected who had been treated by rapid maxillary expansion (RME) using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA). Pretreatment (T1), postexpansion (T2), and posttreatment (T3) dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1–T2, T2–T3 and T1–T3 were determined for each patient. The mean difference between T1–T2, T2–T3 and T1–T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar regions. Results: The intercanine arch width increased by 2.9 mm, inter first premolar width increased by 3.2 mm, inter second premolar width increased by 4.6 mm, intermolar width increased by 4.4 mm, arch perimeter increased by 3.2 mm, arch length decreased by 1.8 mm from pretreatment to posttreatment. There is a strong positive correlation of arch perimeter with intercanine width (r2 = 0.99), interpremolar width (r2 = 0.99) and intermolar width (r2 = 0.98), indicating that there is a significant increase in arch perimeter with increase in arch width at the canine, premolars and molar regions. Conclusion: Findings of this study demonstrate that there was a significant increase in the intercanine, inter first premolar, inter second premolar intermolar arch width and arch perimeter from pretreatment to postexpansion, which was stable at the end of fixed mechanotherapy (PEA). There was a nonsignificant decrease in arch length from pretreatment to postexpansion that further decreased nonsignificantly from postexpansion to posttreatment. PMID:25684912

[Effects of breast-feeding duration, bottle-feeding duration and oral habits on the occlusal characteristics of primary dentition].

PubMed

Chen, X X; Xia, B; Ge, L H; Yuan, J W

2016-12-18

To assess the effects of breast-feeding duration, bottle-feeding duration and oral habits on the occlusal characteristics of primary dentition in 3-6-year-old children in Beijing. This cross sectional study was conducted via an examination of the occlusal characteristics of 734 children combined with a questionnaire completed by their parents/guardians. The examination was performed by a single, previously calibrated examiner and the following variables were evaluated: presence or absence of deep overbite, open bite, anterior cross bite, posterior cross bite, deep overjet, terminal plane relationship of the second primary molar, primary canine relationship, crowding and spacing. Univariate analysis and multiple Logistic regressions were applied to analyze the associations. It was found that a short duration of breast-feeding (never or ≤6 months) was directly associated with posterior cross bite (OR=3.13, 95%CI=1.11-8.82, P=0.031) and no maxillary space (OR=1.63, 95%CI=1.23-2.98, P=0.038). In children breast-fed for ≤6 months, the probability of developing pacifier-sucking habits was 4 times that for those breast-fed for >6 months (OR=4.21, 95%CI=1.85-9.60, P=0.000 2). The children who were bottle-fed for over 18 months had a 1.45-fold higher risk of nonmesial step occlusion and a 1.43-fold higher risk of class II canine relationship compared with those who were bottle-fed for 6-18 months. Non-nutritive sucking habits were also found to affect occlusion: a prolonged digit-sucking habit increased the probability of an anterior open bite, while a pacifier-sucking habit was associated with excessive overjet and absence of lower arch developmental space. Tongue-thrust habit was associated with anterior open bite (OR=4.21, 95%CI=1.85-9.60, P=0.000 2) and posterior cross bite (OR=7.24, 95%CI=1.30-40.13, P=0.024). Lower lip sucking habit was associated with deep overjet and had a negative association with class III canine relationship. Unilateral chewing was associated with spacing in mandibular (OR=1.57, 95%CI=1.03-2.41, P=0.037). Mouth breathing was associated with chronic rhinitis and adenoidal hypertrophy and had an association with spacing in maxillary. The chi-square test did not indicate a statistically significant association between upper lip sucking habit and any occlusal characteristics. Breast-feeding duration was shown to be associated with the prevalence of posterior crossbite, or no maxillary space in the deciduous dentition and development of a pacifier-sucking habit. Children who had a longer duration of bottle-feeding were more likely to develop class II canine relationship. Children who had an oral habit were more likely to develop abnormal occlusal characteristics.

The Ponta Grossa Arch: A proposal for ts configuration and evolution from the interpretation of remote sensing data. M.S. Thesis

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Dealmeida, T. I. R.

1983-01-01

Visual analysis of MSS imagery was used to construct a map of dikes in a wide area of the Ponta Grossa Arch both in the Parana Basin and its basement. Analysis of the map by photographic methods defined the zone of highest density of the dikes, and some aspects of the longitudinal and transverse heterogeneities, as well as localized the apex of the Arch. Borders of the Arch were also suggested. Field investigations confirmed the position of the apex of the flexure on Palezoic sediments and pre-lava Mesozoic sediments. Controversial aspects of the relative absence of dikes in certain units or lithologies and the composition of intrusions surrounding the city of Castro were observed. The apparent synchronism between the activity of the Parana Basin and the Arch is discussed as well as the frequent inverse characteristics of vertical movements. The similarity of rocks in Brazil and Africa is also considered.

Free vibration of arches flexible in shear.

NASA Technical Reports Server (NTRS)

Austin, W. J.; Veletsos, A. S.

1973-01-01

An analysis reported by Veletsos et al. (1972) concerning the free vibrational characteristics of circular arches vibrating in their own planes is considered. The analysis was based on a theory which neglects the effects of rotatory inertia and shearing deformation. A supplementary investigation is conducted to assess the effects of the previously neglected factors and to identify the conditions under which these effects are of practical significance or may be neglected. A simple approximate procedure is developed for estimating the natural frequencies of arches, giving due consideration to the effects of the previously neglected factors.

Stage-specific differential gene expression profiling and functional network analysis during morphogenesis of diphyodont dentition in miniature pigs, Sus Scrofa

PubMed Central

2014-01-01

Background Our current knowledge of tooth development derives mainly from studies in mice, which have only one set of non-replaced teeth, compared with the diphyodont dentition in humans. The miniature pig is also diphyodont, making it a valuable alternative model for understanding human tooth development and replacement. However, little is known about gene expression and function during swine odontogenesis. The goal of this study is to undertake the survey of differential gene expression profiling and functional network analysis during morphogenesis of diphyodont dentition in miniature pigs. The identification of genes related to diphyodont development should lead to a better understanding of morphogenetic patterns and the mechanisms of diphyodont replacement in large animal models and humans. Results The temporal gene expression profiles during early diphyodont development in miniature pigs were detected with the Affymetrix Porcine GeneChip. The gene expression data were further evaluated by ANOVA as well as pathway and STC analyses. A total of 2,053 genes were detected with differential expression. Several signal pathways and 151 genes were then identified through the construction of pathway and signal networks. Conclusions The gene expression profiles indicated that spatio-temporal down-regulation patterns of gene expression were predominant; while, both dynamic activation and inhibition of pathways occurred during the morphogenesis of diphyodont dentition. Our study offers a mechanistic framework for understanding dynamic gene regulation of early diphyodont development and provides a molecular basis for studying teeth development, replacement, and regeneration in miniature pigs. PMID:24498892

[Analysis of the oral microbiota in twin children].

PubMed

Du, Qin; Wang, Yan; Xu, Xin; Li, Yuqing; Li, Mingyun; Zou, Jing; Zhou, Xuedong

2014-04-01

To analyze the differences between the oral microbiota of monozygotic and dizygotic twins by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE). A total of 20 pairs of twin children were included in this study, in which 10 pairs were monozygotic (MZ) twins, and 10 pairs were dizygotic (DZ) twins. Of the 20 pairs, 10 pairs of twins had primary dentition, and 10 pairs had mixed dentition; 17 children had caries, and 23 children had no caries. Genomic DNA was extracted from saliva samples. The 16s rRNA was amplified and analyzed by PCR-DGGE. The PCR-DGGE band number and Shannon index were calculated. Cluster analysis showed high similarity in the oral bacterial community seen in co-twins. However, no significant difference was seen between MZ and DZ twins. In the primary dentition, the PCR-DGGE band number and Shannon index of children with caries (11.00 +/- 1.56, 1.05 +/- 0.36) were lower than those of children without caries (14.00 +/- 2.74, 1.44 +/- 0.37) (P < 0.05). In mixed dentition, the PCR-DGGE band number and Shannon index of children with caries (11.88 +/- 4.05, 1.18 +/- 0.36) were lower than those of children without caries (14.31 +/- 5.71, 1.28 +/- 0.47), but the differences were not statistically significant (P > 0.05). Environmental factors may have a stronger effect on the constitution of oral microbiota in children compared with genetic factors. Children without caries may have a richer microbial diversity compared with children with caries.

Longitudinal eruptive and posteruptive tooth movements, studied on oblique and lateral cephalograms with implants.

PubMed

Zhang, Xiaoyun; Baumrind, Sheldon; Chen, Gui; Chen, Huizhong; Liang, Yi; Xu, Tianmin

2018-05-01

The purpose of this study was to investigate the eruptive and posteruptive tooth displacements of untreated growing subjects longitudinally and the potential connections between posteruptive displacement of the maxillary and mandibular first molars and skeletal facial growth. The sample comprised 11 series of right 45° oblique cephalograms and lateral cephalograms of untreated children with metallic implants of the Björk type obtained from the archives of a growth study. Cephalograms generated at approximately 2-year intervals between the ages of 8.5 and 16 years were selected and traced. Superimpositions of serial tracings of oblique cephalograms on stable intraosseous implants were made to determine the displacements of buccal segment teeth in both arches, and superimpositions of serial tracings of lateral cephalograms were used to evaluate growth of the jaws. Continuous mesial tipping of the maxillary molars was observed from 8.5 to 16 years of age, averaging 8.2° ± 5.5° for the first molars and 18.3°± 8.5° for the second molars. Compared with the maxillary molars, the mandibular first molars showed less change in angulation except in the later mixed dentition when more than half of the subjects had accelerated forward tipping of the first molar in the late mixed dentition associated with migration into the leeway space. Average amounts of cumulative eruption from 8.5 to 16 years of age were 12.1 ± 2.1 mm downward and 3.8 ± 1.7 mm forward for the maxillary first molar. The mandibular first molar showed 8.6 ± 2.3 mm of eruption and 4.4 ± 1.9 mm of mesial migration. Peak velocity of vertical eruption of the maxillary and mandibular first molars corresponded to the skeletal vertical growth spurt. The maxillary canines and first premolars showed remarkable and continuous uprighting migration during eruption, averaging 9.5° ± 5.0° and 10.5° ± 6.7°, respectively. However, when they erupted into the occlusion, their changes in angulation reverted to forward tipping. The same tendency was also found in the mandibular canines and first premolars. Remarkable eruption and migration occur to the teeth of both arches during childhood and adolescence. Rates of first molar eruption during adolescence follow the general pattern of somatic growth. We infer that maintaining the original distal crown angulation of the maxillary molars may be an effective protocol for preservation of anchorage. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Dental arch dimensions, form and tooth size ratio among a Saudi sample.

PubMed

Omar, Haidi; Alhajrasi, Manar; Felemban, Nayef; Hassan, Ali

2018-01-01

To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters. Methods: This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton's ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016. Results: Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p less than 0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton's anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton's overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton's ratio. Conclusion: The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton's anterior teeth ratio than in overall ratio.

[Angiographic evaluation of branching pattern and anatomy of the aortic arch].

PubMed

Ergun, Onur; Tatar, İdil Güneş; Birgi, Erdem; Durmaz, Hasan Ali; Akçalar, Seray; Kurt, Aydın; Hekimoğlu, Baki

2015-04-01

The study aimed to investigate anatomical variations in branching pattern and anatomy of the aortic arch, and the prevalence of each type. Between September 2011 and November 2013, angiographic studies of 270 patients (144 male, 126 female) were analyzed retrospectively for variations in branching pattern and anatomy of the aortic arch. Patient mean age was 59.8 years (range, 13-88). Branching variations were found and divided into subtypes. Patients were also classified according to arch anatomy. Incidence of variations and types of aortic arch were statistically analysed. Analysis of the 270 patients revealed six types of branching pattern. Type I, classical pattern arch with three branches (TB, LCC, LS), was observed in 198 cases (73.3%). Type II (bovine arch), the most commonly observed variation, in which LCC originates from TB, was observed in 58 cases (21.5%). Type III, in which the left vertebral artery arises from the arch, was seen in seven cases (2.6%). Type IV, a combination of types II and III, was observed in three cases (1.1%). Type V, common origin of common carotids, LS and aberrant RS, was found in three cases (1.1%). Type VI (avian type), arch with only two branches, was observed in one case (0.4%). When patients were classified according to aortic arch anatomy, Type 1, Type 2 and Type 3 were observed in 195, 40 and 35 patients respectively. Knowledge of the variations and anatomy of the aortic arch is essential during interventional procedures and neck-thorax surgery.

Molar distalization with pendulum appliances in the mixed dentition: effects on the position of unerupted canines and premolars.

PubMed

Kinzinger, Gero S M; Wehrbein, Heinrich; Gross, Ulrich; Diedrich, Peter R

2006-03-01

The pendulum appliance allows for rapid molar distalization without the need for patient compliance. Its efficiency has been confirmed in a number of clinical studies. However, the potential interactions and positional changes between the deciduous molars used for dental anchorage and the erupted and unerupted permanent teeth have yet to be clarified when this appliance is used for molar distalization in the mixed dentition. Twenty-nine patients in the mixed dentition each received a modified pendulum appliance with a distal screw and a preactivated pendulum spring for bilateral distalization of the maxillary molars. The patients were divided into 4 groups based on dentition stages: patient group 1 (PG 1, n = 10) was in the early mixed dentition; patients had resorption of the distal root areas of the deciduous molars being used for dental anchorage, and the unerupted premolars were located at the distal margin of the deciduous molar root region. Based on radiographs taken before placement of the pendulum appliance, patient group 2 (PG 2, n = 10) was diagnosed as having a central location of the unerupted premolars. In the third group (PG 3, n = 4), the first premolars were already erupted and could be integrated into the dental anchorage, but the canines were not yet erupted. In the fourth group (PG 4, n = 5), the first premolars and both canines were fully erupted. Statistical analysis of the measured results showed significant differences in the side effects between PG 1 and PG 2. In patients being treated with pendulum appliances, the anchorage quality of the deciduous molars that were already partially resorbed in the distal root area was comparatively reduced. Consequently, the mesial drift of the deciduous molars and incisors was increased, without impairing the extent and quality of the molar distalization. Anchorage loss in the supporting area had no direct impact on the sagittal position of the unerupted premolars in the early mixed dentition. If permanent teeth have already started to erupt in the supporting area, additional space restrictions should be avoided in patients with critical topography, especially if there is little space for the unerupted canines. At this stage of the mixed dentition, premolar extraction or augmentation of the supporting area with extraoral headgear offers a therapeutic alternative to intraoral distalization appliances with exclusively dental anchorage.

Hemiarch versus total aortic arch replacement in acute type A dissection: a systematic review and meta-analysis

PubMed Central

Poon, Shi Sum; Theologou, Thomas; Harrington, Deborah; Kuduvalli, Manoj; Oo, Aung

2016-01-01

Background Despite recent advances in aortic surgery, acute type A aortic dissection remains a surgical emergency associated with high mortality and morbidity. Appropriate management is crucial to achieve satisfactory outcomes but the optimal surgical approach is controversial. The present systematic review and meta-analysis sought to access cumulative data from comparative studies between hemiarch and total aortic arch replacement in patients with acute type A aortic dissection. Methods A systematic review of the literature using six databases. Eligible studies include comparative studies on hemiarch versus total arch replacement reporting short, medium and long term outcomes. A meta-analysis was performed on eligible studies reporting outcome of interest to quantify the effects of hemiarch replacement on mortality and morbidity risk compared to total arch replacement. Result Fourteen retrospective studies met the inclusion criteria and 2,221 patients were included in the final analysis. Pooled analysis showed that hemiarch replacement was associated with a lower risk of post-operative renal dialysis [risk ratio (RR) =0.72; 95% confidence interval (CI): 0.56–0.94; P=0.02; I2=0%]. There was no significant difference in terms of in-hospital mortality between the two groups (RR =0.84; 95% CI: 0.65–1.09; P=0.20; I2=0%). Cardiopulmonary bypass, aortic cross clamp and circulatory arrest times were significantly longer in total arch replacement. During follow up, no significant difference was reported from current studies between the two operative approaches in terms of aortic re-intervention and freedom from aortic reoperation. Conclusions Within the context of publication bias by high volume aortic centres and non-randomized data sets, there was no difference in mortality outcomes between the two groups. This analysis serves to demonstrate that for those centers doing sufficient total aortic arch activity to allow for publication, excellent and equivalent outcomes are achievable. Conclusions on differences in longer term outcome data are required. We do not, however, advocate total arch as a primary approach by all centers and surgeons irrespective of patient characteristics, but rather, a tailored approach based on surgeon and center experience and patient presentation. PMID:27386403

A 12 month clinical study of bond failures of recycled versus new stainless steel orthodontic brackets.

PubMed

Cacciafesta, Vittorio; Sfondrini, Maria Francesca; Melsen, Birte; Scribante, Andrea

2004-08-01

The purpose of this prospective longitudinal randomized study was to compare the clinical performance of recycled brackets with that of new stainless steel brackets (Orthos). Twenty patients treated with fixed appliances were included in the investigation. Using a 'split-mouth' design, the dentition of each patient was divided into four quadrants. In 11 randomly selected patients, the maxillary left and mandibular right quadrants were bonded with recycled brackets, and the remaining quadrants with new stainless steel brackets. In the other nine patients the quadrants were inverted. Three hundred and ten stainless steel brackets were examined: 156 were recycled and the remaining 154 were new. All the brackets were bonded with a self-cured resin-modified glass ionomer (GC Fuji Ortho). The number, cause, and date of bracket failures were recorded over 12 months. Statistical analysis was performed by means of a paired t-test, Kaplan-Meier survival estimates, and the log-rank test. No statistically significant differences were found between: (a) the total bond failure rate of recycled and new stainless steel brackets; (b) the upper and lower arches; (c) the anterior and posterior segments. These findings demonstrate that recycling metallic orthodontic brackets can be of benefit to the profession, both economically and ecologically, as long as the orthodontist is aware of the various aspects of the recycling methods, and that patients are informed about the type of bracket that will be used for their treatment.

[DENTAL STATUS OF PATIENTS WITH INTRAUTERINE GROWTH RESTRICTION IN PAST HISTORY DURING PERIOD OF REMOVABLE AND PERMANENT DENTITION].

PubMed

Garmash, O V; Ryabokon, E N

2014-12-01

The analysis of the dental status in patients with IUGR in past history in period of removable and permanent dentition was conducted. 39 patients with intrauterine growth retardation in past history were examined. The clinical, statistical methods were held. Concluded that the child, who was born with IUGR, later in future life, has a great risk of dental diseases. The most considerable violations were found in patients with "symmetrical" form of intrauterine growth retardation. It is proposed to use clinical markers as possible predictors of periodontal diseases.

Dynamic Numerical Analysis of Steel Footbridge

NASA Astrophysics Data System (ADS)

Major, Maciej; Minda, Izabela; Major, Izabela

2017-06-01

The study presents a numerical analysis of the arched footbridge designed in two variants, made of steel and aluminium. The first part presents the criteria for evaluation of the comfort of using the footbridges. The study examined the footbridge with arched design with span in the axis of 24 m and width of 1.4 m. Arch geometry was made as a part of the circle with radius of r = 20 m cut off with a chord with length equal to the calculation length of the girders. The model of the analysed footbridge was subjected to the dynamic effect of wind and the pedestrian traffic with variable flexibility. The analyses used Robot Structural Analysis software.

Vocal cord paralysis after aortic arch surgery: predictors and clinical outcome.

PubMed

Ohta, Noriyuki; Kuratani, Toru; Hagihira, Satoshi; Kazumi, Ken-Ichiro; Kaneko, Mitsunori; Mori, Takahiko

2006-04-01

This study is retrospective cohort study of data on vocal cord paralysis after aortic arch surgery collected during 14 years at a general hospital. We investigated factors in the development of vocal cord paralysis after aortic arch surgery and the effect of vocal cord paralysis on clinical course and outcome. We reviewed data for 182 patients who underwent aortic arch surgery for aortic arch aneurysm and aortic dissection between 1989 and 2003, of whom 58 patients had proximal aortic repair, 62 had distal arch repair, and 62 had total arch repair. We assessed factors associated with the development of vocal cord paralysis and examined in detail the clinical outcome of patients with vocal cord paralysis. Postoperative vocal cord paralysis occurred in 40 patients. Multiple logistic regression analysis revealed the following risk factors with odds ratios (OR) for vocal cord paralysis: extension of procedures into distal arch (OR, 17.0), chronic dilatation of the aorta at the left subclavian artery (OR, 9.14), and total arch repair (OR, 4.24). Adoption of open-style stent-grafts reduced the incidence of vocal cord paralysis (OR, 0.031). The postoperative occurrence of vocal cord paralysis itself emerges as an independent predictor of pulmonary complications (OR, 4.12) and leads to a longer duration of hospital stay. The risk of vocal cord paralysis after aortic arch surgery depends on surgical factors, such as aneurysmal involvement of the distal arch, or the application of newer, less invasive surgical procedures. Vocal cord paralysis after aortic arch surgery itself, under aggressive postoperative respiratory management, did not increase aspiration pneumonia but was associated with postoperative complications leading to higher hospital mortality and prolonged hospitalization.

Maxillary arch dimensions associated with acoustic parameters in prepubertal children.

PubMed

Hamdan, Abdul-Latif; Khandakji, Mohannad; Macari, Anthony Tannous

2018-04-18

To evaluate the association between maxillary arch dimensions and fundamental frequency and formants of voice in prepubertal subjects. Thirty-five consecutive prepubertal patients seeking orthodontic treatment were recruited (mean age = 11.41 ± 1.46 years; range, 8 to 13.7 years). Participants with a history of respiratory infection, laryngeal manipulation, dysphonia, congenital facial malformations, or history of orthodontic treatment were excluded. Dental measurements included maxillary arch length, perimeter, depth, and width. Voice parameters comprising fundamental frequency (f0_sustained), Habitual pitch (f0_count), Jitter, Shimmer, and different formant frequencies (F1, F2, F3, and F4) were measured using acoustic analysis prior to initiation of any orthodontic treatment. Pearson's correlation coefficients were used to measure the strength of associations between different dental and voice parameters. Multiple linear regressions were computed for the predictions of different dental measurements. Arch width and arch depth had moderate significant negative correlations with f0 ( r = -0.52; P = .001 and r = -0.39; P = .022, respectively) and with habitual frequency ( r = -0.51; P = .0014 and r = -0.34; P = .04, respectively). Arch depth and arch length were significantly correlated with formant F3 and formant F4, respectively. Predictors of arch depth included frequencies of F3 vowels, with a significant regression equation ( P-value < .001; R 2 = 0.49). Similarly, fundamental frequency f0 and frequencies of formant F3 vowels were predictors of arch width, with a significant regression equation ( P-value < .001; R 2 = 0.37). There is a significant association between arch dimensions, particularly arch length and depth, and voice parameters. The formant most predictive of arch depth and width is the third formant, along with fundamental frequency of voice.

Mathematical Modeling and Numerical Analysis of Thermal Distribution in Arch Dams considering Solar Radiation Effect

PubMed Central

Mirzabozorg, H.; Hariri-Ardebili, M. A.; Shirkhan, M.; Seyed-Kolbadi, S. M.

2014-01-01

The effect of solar radiation on thermal distribution in thin high arch dams is investigated. The differential equation governing thermal behavior of mass concrete in three-dimensional space is solved applying appropriate boundary conditions. Solar radiation is implemented considering the dam face direction relative to the sun, the slop relative to horizon, the region cloud cover, and the surrounding topography. It has been observed that solar radiation changes the surface temperature drastically and leads to nonuniform temperature distribution. Solar radiation effects should be considered in thermal transient analysis of thin arch dams. PMID:24695817

Mathematical modeling and numerical analysis of thermal distribution in arch dams considering solar radiation effect.

PubMed

Mirzabozorg, H; Hariri-Ardebili, M A; Shirkhan, M; Seyed-Kolbadi, S M

2014-01-01

The effect of solar radiation on thermal distribution in thin high arch dams is investigated. The differential equation governing thermal behavior of mass concrete in three-dimensional space is solved applying appropriate boundary conditions. Solar radiation is implemented considering the dam face direction relative to the sun, the slop relative to horizon, the region cloud cover, and the surrounding topography. It has been observed that solar radiation changes the surface temperature drastically and leads to nonuniform temperature distribution. Solar radiation effects should be considered in thermal transient analysis of thin arch dams.

Worn is born: The role of the maxillo-mandibular relation in management of worn dentition.

PubMed

Li, Zhongjie; Yang, Zheng; Lan, Tingting; Zhao, Hanchi; Liu, Yang

2017-07-01

Worn dentition, often accompanied by occlusion changes such as reduced vertical dimension, poses a big challenge to both diagnosis and treatment. Current established causes fail to explain the observed tooth wearing patterns, and the treatments based on the documented pathogeneses are often unpredictable and require frequent maintenance. From the perspective of stomatognathic system, we postulate that the role of maxillo-mandibular relation is a crucial part in the tooth wear progression patterns, and should be well addressed in treatment planning. Incompatible occlusion with the inherent tendency of maxillo-mandibular relation has a profound effect on either wearing of natural teeth or failures of restorations. With the aid of cephalometrics and analysis of occlusion it is now possible to reduce this fallacy and achieve a harmony by re-designing the occlusion. According to our treated worn dentition cases, the restoring treatment guided by the tendency of maxillo-mandibular relation showed very promising results. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of variation of impression material combinations, dual arch tray types, and sequence of pour on the accuracy of working dies: “An in vitro study”

PubMed Central

Reddy, Nagam Raja; Reddy, Jakranpally Sathya; Padmaja, Bramha Josyula Indira; Reddy, Budigi Madan Mohan; Sunil, Motupalli; Reddy, Bommireddy Tejeswar

2016-01-01

Aims: To evaluate the accuracy of dies made from dual arch impressions using different sectional dual arch trays, combinations of elastomeric impression materials, and the sequence of pour of dies. Subjects and Methods: The dual arch impression materials were grouped into three groups depending on the combination of impression materials used and each group is subdivided into four subgroups. A sample size of 8 in each subgroup yielding a total 96 impressions will be made into three groups of 32 each (Group I, II, and III). Group I constitute impressions made using monophase (M) impression material, Group II constitute impressions made using combination of heavy body and light body (HL), and Group III constitute impressions made using combination of putty and light body (PL). Dies obtained were evaluated with a travelling microscope to measure the buccolingual width of the tooth at the margin by using the sharp corners of the notches as reference points. Statistical Analysis Used: Descriptive analysis namely mean and standard deviation, one-way analysis of variance test. Results: The results obtained in this study indicate that though not statistically significant, the metal dual arch trays performed better when compared to the plastic trays in reproducing die dimensions. Conclusions: From the results obtained, dies poured from combination of heavy body and light body impressions using plastic or metal dual arch trays showed least variation in bucco-lingual dimension from master model. PMID:27141172

Dental arch dimensions, form and tooth size ratio among a Saudi sample

PubMed Central

Omar, Haidi; Alhajrasi, Manar; Felemban, Nayef; Hassan, Ali

2018-01-01

Objectives: To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters. Methods: This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton’s ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016. Results: Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p<0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton’s anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton’s overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton’s ratio. Conclusion: The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton’s anterior teeth ratio than in overall ratio. PMID:29332114

Oral Care for Developmentally Disabled Children: The Primary Dentition Stage.

ERIC Educational Resources Information Center

Kenny, David J.; Judd, Peter L.

1988-01-01

Developmental disabilities and chronic illness can impact the oral health of children in the preeruptive and primary dentition stages. The article covers prevention and management of dental caries; gingival changes; trauma to the primary dentition; sucking, swallowing, and mastication; extraorally fed patients; and factitial injuries. Home-care…

Modified Angle's Classification for Primary Dentition.

PubMed

Chandranee, Kaushik Narendra; Chandranee, Narendra Jayantilal; Nagpal, Devendra; Lamba, Gagandeep; Choudhari, Purva; Hotwani, Kavita

2017-01-01

This study aims to propose a modification of Angle's classification for primary dentition and to assess its applicability in children from Central India, Nagpur. Modification in Angle's classification has been proposed for application in primary dentition. Small roman numbers i/ii/iii are used for primary dentition notation to represent Angle's Class I/II/III molar relationships as in permanent dentition, respectively. To assess applicability of modified Angle's classification a cross-sectional preschool 2000 children population from central India; 3-6 years of age residing in Nagpur metropolitan city of Maharashtra state were selected randomly as per the inclusion and exclusion criteria. Majority 93.35% children were found to have bilateral Class i followed by 2.5% bilateral Class ii and 0.2% bilateral half cusp Class iii molar relationships as per the modified Angle's classification for primary dentition. About 3.75% children had various combinations of Class ii relationships and 0.2% children were having Class iii subdivision relationship. Modification of Angle's classification for application in primary dentition has been proposed. A cross-sectional investigation using new classification revealed various 6.25% Class ii and 0.4% Class iii molar relationships cases in preschool children population in a metropolitan city of Nagpur. Application of the modified Angle's classification to other population groups is warranted to validate its routine application in clinical pediatric dentistry.

An investigation of the seismic behavior of a deck-type reinforced concrete arch bridge

NASA Astrophysics Data System (ADS)

Farahani, Emadoddin Majdabadi; Maalek, Shahrokh

2017-07-01

This paper attempts to explore potential benefits of form in a deck-type reinforced concrete (RC) arch bridge in connection with its overall seismic behavior and performance. Through a detailed three-dimensional finite element modeling and analysis of an actual existing deck-type RC arch bridge, some useful quantitative information have been derived that may serve for a better understanding of the seismic behavior of such arch bridges. A series of the nonlinear dynamic analyses has been carried out under the action of seven different time histories of ground motion scaled to the AASHTO 2012 response spectrum. The concept of demand to capacity ratios has been employed to provide an initial estimation of the seismic performance of the bridge members. As a consequence of the structural form, a particular type of irregularity is introduced due to variable heights of columns transferring the deck loads to the main arch. Hence, a particular attention has been paid to the internal force/moment distributions within the short, medium, and long columns as well as along the main arch. A study of the effects of the vertical component of ground motion has demonstrated the need for the inclusion of these effects in the analysis of such bridges.

Evaluation of the relationship between the static measurement of transverse arch flexibility of the forefoot and gait parameters in healthy subjects.

PubMed

Kondo, Takashi; Muneta, Takeshi; Fukui, Tsutomu

2017-03-01

[Purpose] To investigate the relationship between the static measurement of the transverse arch of the forefoot, using a 3-dimensional (3D) foot scanner, and kinetics and kinematics of gait parameters in the sagittal plane. [Subjects and Methods] Twenty healthy subjects participated in this study. The transverse arch of the forefoot was measured under three conditions as follows: condition 1, sitting; condition 2, standing; and condition 3, foot forward and lower leg tilting anteriorly to the maximum position with heel contact. Gait parameters were recorded using a 3D motion analysis system and force plate. Correlation coefficients between TAF for each comparison of conditions and gait parameters were calculated using the Spearman correlation analysis. [Results] Rates of the transverse arch of the forefoot width and height between condition 2 and condition 3 were significantly correlated with the anterior and posterior component of ground reaction forces, the hip joint extension angle, and the ankle plantar flexion moment. [Conclusion] Our study's findings indicated that increased stiffness of the transverse arch of the forefoot was related to the increase in ankle plantar moment, and decreased stiffness of the transverse arch of the forefoot was related to the increase in hip joint extension angle during gait.

Evaluation of the relationship between the static measurement of transverse arch flexibility of the forefoot and gait parameters in healthy subjects

PubMed Central

Kondo, Takashi; Muneta, Takeshi; Fukui, Tsutomu

2017-01-01

[Purpose] To investigate the relationship between the static measurement of the transverse arch of the forefoot, using a 3-dimensional (3D) foot scanner, and kinetics and kinematics of gait parameters in the sagittal plane. [Subjects and Methods] Twenty healthy subjects participated in this study. The transverse arch of the forefoot was measured under three conditions as follows: condition 1, sitting; condition 2, standing; and condition 3, foot forward and lower leg tilting anteriorly to the maximum position with heel contact. Gait parameters were recorded using a 3D motion analysis system and force plate. Correlation coefficients between TAF for each comparison of conditions and gait parameters were calculated using the Spearman correlation analysis. [Results] Rates of the transverse arch of the forefoot width and height between condition 2 and condition 3 were significantly correlated with the anterior and posterior component of ground reaction forces, the hip joint extension angle, and the ankle plantar flexion moment. [Conclusion] Our study’s findings indicated that increased stiffness of the transverse arch of the forefoot was related to the increase in ankle plantar moment, and decreased stiffness of the transverse arch of the forefoot was related to the increase in hip joint extension angle during gait. PMID:28356622

Circummandibular Wires for Treatment of Dentoalveolar Fractures Adjacent to Edentulous Areas: A Report of Two Cases.

PubMed

Maloney, Karl

2015-09-01

In general, dentoalveolar fractures are a common injury seen in emergency departments, dental offices, and oral and maxillofacial surgery practices. These injuries can be the result of direct trauma or indirect trauma. Direct trauma more often causes trauma to the maxillary dentition due to the exposure of the maxillary anterior teeth. Indirect trauma is usually the result of forced occlusion secondary to a blow to the chin or from a whiplash injury. Falls are the most common mechanism of injury seen in the pediatric group. In adolescents, many of these fractures are sustained during sporting activities. However, the use of mouth guards and other protective equipment has decreased this number. Most adult injuries are caused by motor vehicle accidents, contact sports, falls, bicycles, interpersonal violence, medical/dental mishaps, and industrial accidents. Early intervention to reduce and stabilize the fracture is required to establish a bony union and ensure correct function. Most dentoalveolar fractures have bilateral stable adjacent dentition and are treated with a closed technique utilizing an acid-etch/resin splint followed by splint removal at 4 weeks. Other inferior stabilization treatments used are arch bars and other wiring techniques. It is widely accepted that semirigid stabilization techniques, such as an acid-etch/resin splint or wiring procedures, are adequate to treat dentoalveolar fractures. This is in contrast to the treatment of mandible fractures where AO principles of rigid fixation are often followed. Fractures that are unable to be reduced sometimes necessitate an open reduction followed by internal fixation, sometimes using a secondary splint for mobile teeth. In those rare cases when there are not stable adjacent teeth bilaterally other modalities must be considered. In the present report, two cases are presented where circummandibular wires were used to treat fractured mandibular dentoalveolar segments adjacent to edentulous areas.

Slow relaxation dynamics of clogs in a vibrated granular silo.

PubMed

Guerrero, B V; Pugnaloni, L A; Lozano, C; Zuriguel, I; Garcimartín, A

2018-04-01

We experimentally explore the vibration-induced unclogging of arches halting the flow in a two-dimensional silo. The endurance of arches is determined by carrying out a survival analysis of their breaking times. By analyzing the dynamics of two morphological variables, we demonstrate that arches evolve toward less regular structures and it seems that there may exist a certain degree of irregularity that the arch reaches before collapsing. Moreover, we put forward that σ (the standard deviation of all angles between consecutive beads) describes faithfully the morphological evolution of the arch. Focusing on long-lasting arches, we study σ calculating its two-time autocorrelation function and its mean-squared displacement. In particular, the apparent logarithmic increase of the correlation and the decrease of the mean-squared displacement of σ when the waiting time is increased reveal a slowing down of the dynamics. This behavior is a clear hallmark of aging phenomena and confirms the lack of ergodicity in the unclogging dynamics. Our findings provide new insights on how an arch tends to destabilize and how the probability that it breaks with a long sustained vibration decreases with time.

Slow relaxation dynamics of clogs in a vibrated granular silo

NASA Astrophysics Data System (ADS)

Guerrero, B. V.; Pugnaloni, L. A.; Lozano, C.; Zuriguel, I.; Garcimartín, A.

2018-04-01

We experimentally explore the vibration-induced unclogging of arches halting the flow in a two-dimensional silo. The endurance of arches is determined by carrying out a survival analysis of their breaking times. By analyzing the dynamics of two morphological variables, we demonstrate that arches evolve toward less regular structures and it seems that there may exist a certain degree of irregularity that the arch reaches before collapsing. Moreover, we put forward that σ (the standard deviation of all angles between consecutive beads) describes faithfully the morphological evolution of the arch. Focusing on long-lasting arches, we study σ calculating its two-time autocorrelation function and its mean-squared displacement. In particular, the apparent logarithmic increase of the correlation and the decrease of the mean-squared displacement of σ when the waiting time is increased reveal a slowing down of the dynamics. This behavior is a clear hallmark of aging phenomena and confirms the lack of ergodicity in the unclogging dynamics. Our findings provide new insights on how an arch tends to destabilize and how the probability that it breaks with a long sustained vibration decreases with time.

Elastic, plastic, fracture analysis of masonry arches: A multi-span bridge case study

NASA Astrophysics Data System (ADS)

Lacidogna, Giuseppe; Accornero, Federico

2018-01-01

In this work a comparison is presented between elastic, plastic, and fracture analysis of the monumental arch bridge of Porta Napoli, Taranto (Italy). By means of a FEM model and applying the Mery's Method, the behavior of the curved structure under service loads is verified, while considering the Safe Theorem approach byHeyman, the ultimate carrying capacity of the structure is investigated. Moreover, by using Fracture Mechanics concepts, the damage process which takes place when the conditions assessed through linear elastic analysis are no longer valid, and before the set-in of the conditions established by means of the plastic limit analysis, is numerically analyzed. The study of these transitions returns an accurate and effective whole service life assessment of the Porta Napoli masonry arch bridge.

Design and fabrication of complete dentures using CAD/CAM technology

PubMed Central

Han, Weili; Li, Yanfeng; Zhang, Yue; lv, Yuan; Zhang, Ying; Hu, Ping; Liu, Huanyue; Ma, Zheng; Shen, Yi

2017-01-01

Abstract The aim of the study was to test the feasibility of using commercially available computer-aided design and computer-aided manufacturing (CAD/CAM) technology including 3Shape Dental System 2013 trial version, WIELAND V2.0.049 and WIELAND ZENOTEC T1 milling machine to design and fabricate complete dentures. The modeling process of full denture available in the trial version of 3Shape Dental System 2013 was used to design virtual complete dentures on the basis of 3-dimensional (3D) digital edentulous models generated from the physical models. The virtual complete dentures designed were exported to CAM software of WIELAND V2.0.049. A WIELAND ZENOTEC T1 milling machine controlled by the CAM software was used to fabricate physical dentitions and baseplates by milling acrylic resin composite plates. The physical dentitions were bonded to the corresponding baseplates to form the maxillary and mandibular complete dentures. Virtual complete dentures were successfully designed using the software through several steps including generation of 3D digital edentulous models, model analysis, arrangement of artificial teeth, trimming relief area, and occlusal adjustment. Physical dentitions and baseplates were successfully fabricated according to the designed virtual complete dentures using milling machine controlled by a CAM software. Bonding physical dentitions to the corresponding baseplates generated the final physical complete dentures. Our study demonstrated that complete dentures could be successfully designed and fabricated by using CAD/CAM. PMID:28072686

Analysis of maxillary arch force/couple systems for a simulated high canine malocclusion: Part 1. Passive ligation.

PubMed

Fok, Jonathan; Toogood, Roger W; Badawi, Hisham; Carey, Jason P; Major, Paul W

2011-11-01

To better understand the mechanics of bracket/archwire interaction through analysis of force and couple distribution along the maxillary arch. An orthodontic simulator was utilized to study high canine malocclusion. Force/couple distributions, referenced to the center of resistance (CR) of each tooth, produced by passive ligation brackets and round wire were measured. Tests were repeated for 12 bracket sets with 12 wires per set. Propagation of the force/couple systems around the arch was minimal. Binding was observed only on the teeth adjacent to the displaced canine. For most of the teeth, reduced resistance to sliding of the passive ligation bracket yielded minimal tangential and normal forces at the bracket and contributed to lower moments at CR. Some potential mechanical advantages of passive ligation systems are suggested for the case studied. In particular, limited propagation around the arch reduces the occurrence of unwanted force/couple systems.

Force delivery of NiTi orthodontic arch wire at different magnitude of deflections and temperatures: A finite element study.

PubMed

Razali, M F; Mahmud, A S; Mokhtar, N

2018-01-01

NiTi arch wires are used widely in orthodontic treatment due to its superelastic and biocompatibility properties. In brackets configuration, the force released from the arch wire is influenced by the sliding resistances developed on the arch wire-bracket contact. This study investigated the evolution of the forces released by a rectangular NiTi arch wire towards possible intraoral temperature and deflection changes. A three dimensional finite element model was developed to measure the force-deflection behavior of superelastic arch wire. Finite element analysis was used to distinguish the martensite fraction and phase state of arch wire microstructure in relation to the magnitude of wire deflection. The predicted tensile and bending results from the numerical model showed a good agreement with the experimental results. As contact developed between the wire and bracket, binding influenced the force-deflection curve by changing the martensitic transformation plateau into a slope. The arch wire recovered from greater magnitude of deflection released lower force than one recovered from smaller deflection. In contrast, it was observed that the plateau slope increased from 0.66N/mm to 1.1N/mm when the temperature was increased from 26°C to 46°C. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nonlinear Buckling Analysis of Functionally Graded Graphene Reinforced Composite Shallow Arches with Elastic Rotational Constraints under Uniform Radial Load.

PubMed

Huang, Yonghui; Yang, Zhicheng; Liu, Airong; Fu, Jiyang

2018-05-28

The buckling behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) shallow arches with elastic rotational constraints under uniform radial load is investigated in this paper. The nonlinear equilibrium equation of the FG-GPLRC shallow arch with elastic rotational constraints under uniform radial load is established using the Halpin-Tsai micromechanics model and the principle of virtual work, from which the critical buckling load of FG-GPLRC shallow arches with elastic rotational constraints can be obtained. This paper gives special attention to the effect of the GPL distribution pattern, weight fraction, geometric parameters, and the constraint stiffness on the buckling load. The numerical results show that all of the FG-GPLRC shallow arches with elastic rotational constraints have a higher buckling load-carrying capacity compared to the pure epoxy arch, and arches of the distribution pattern X have the highest buckling load among four distribution patterns. When the GPL weight fraction is constant, the thinner and larger GPL can provide the better reinforcing effect to the FG-GPLRC shallow arch. However, when the value of the aspect ratio is greater than 4, the flakiness ratio is greater than 103, and the effect of GPL's dimensions on the buckling load of the FG-GPLRC shallow arch is less significant. In addition, the buckling model of FG-GPLRC shallow arch with elastic rotational constraints is changed as the GPL distribution patterns or the constraint stiffness changes. It is expected that the method and the results that are presented in this paper will be useful as a reference for the stability design of this type of arch in the future.

Abnormal aortic arch morphology in Turner syndrome patients is a risk factor for hypertension.

PubMed

De Groote, Katya; Devos, Daniël; Van Herck, Koen; Demulier, Laurent; Buysse, Wesley; De Schepper, Jean; De Wolf, Daniël

2015-09-01

Hypertension in Turner syndrome (TS) is a multifactorial, highly prevalent and significant problem that warrants timely diagnosis and rigorous treatment. The objective of this study was to investigate the association between abnormal aortic arch morphology and hypertension in adult TS patients. This was a single centre retrospective study in 74 adult TS patients (age 29.41 ± 8.91 years) who underwent a routine cardiac MRI. Patients were assigned to the hypertensive group (N = 31) if blood pressure exceeded 140/90 mmHg and/or if they were treated with antihypertensive medication. Aortic arch morphology was evaluated on MRI images and initially assigned as normal (N = 54) or abnormal (N = 20), based on the curve of the transverse arch and the distance between the left common carotid-left subclavian artery. We additionally used a new more objective method to describe aortic arch abnormality in TS by determination of the relative position of the highest point of the transverse arch (AoHP). Logistic regression analysis showed that hypertension is significantly and independently associated with age, BMI and abnormal arch morphology, with a larger effect size for the new AoHP method than for the classical method. TS patients with hypertension and abnormal arch morphology more often had dilatation of the ascending aorta. There is a significant association between abnormal arch morphology and hypertension in TS patients, independent of age and BMI, and not related to other structural heart disease. We suggest that aortic arch morphology should be included in the risk stratification for hypertension in TS and propose a new quantitative method to express aortic arch morphology.

Classification and outcomes of extended arch repair for acute Type A aortic dissection: a systematic review and meta-analysis.

PubMed

Smith, Holly N; Boodhwani, Munir; Ouzounian, Maral; Saczkowski, Richard; Gregory, Alexander J; Herget, Eric J; Appoo, Jehangir J

2017-03-01

Distal extent of repair in patients undergoing surgery for acute Type A aortic dissection (ATAAD) is controversial. Emerging hybrid techniques involving open and endovascular surgery have been reported in small numbers by select individual centres. A systematic review and meta-analysis was performed to investigate the outcomes following extended arch repair for ATAAD. A classification system is proposed of the different techniques to facilitate discussion and further investigation. Using Ovid MEDLINE, 38 studies were identified reporting outcomes for 2140 patients. Studies were categorized into four groups on the basis of extent of surgical aortic resection and the method of descending thoracic aortic stent graft deployment; during circulatory arrest (frozen stented elephant trunk) or with normothermic perfusion and use of fluoroscopy (warm stent graft): (I) surgical total arch replacement, (II) total arch and frozen stented elephant trunk, (III) hemiarch and frozen stented elephant trunk and (IV) total arch and warm stent graft. Perioperative event rates were obtained for each of the four groups and the entire cohort using pooled summary estimates. Linearized rates of late mortality and reoperation were calculated. Overall pooled hospital mortality for extended arch techniques was 8.6% (95% CI 7.2-10.0). Pooled data categorized by surgical technique resulted in hospital mortality of 11.9% for total arch, 8.6% total arch and frozen stented elephant trunk, 6.3% hemiarch and frozen stented elephant trunk and 5.5% total arch and 'warm stent graft'. Overall incidence of stroke for the entire cohort was 5.7% (95% CI 3.6-8.2). Rate of spinal cord ischaemia was 2.0% (95% CI 1.2-3.0). Pooled linearized rate of late mortality was 1.66%/pt-yr (95% CI 1.34-2.07) with linearized rate of re-operation of 1.62%/pt-yr (95% CI 1.24-2.05). Perioperative results of extended arch procedures are encouraging. Further follow-up is required to see if long-term complications are reduced with these emerging techniques. The proposed classification system will facilitate future comparison of short- and long-term results of different techniques of extended arch repair for ATAAD. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Modified Angle's Classification for Primary Dentition

PubMed Central

Chandranee, Kaushik Narendra; Chandranee, Narendra Jayantilal; Nagpal, Devendra; Lamba, Gagandeep; Choudhari, Purva; Hotwani, Kavita

2017-01-01

Aim: This study aims to propose a modification of Angle's classification for primary dentition and to assess its applicability in children from Central India, Nagpur. Methods: Modification in Angle's classification has been proposed for application in primary dentition. Small roman numbers i/ii/iii are used for primary dentition notation to represent Angle's Class I/II/III molar relationships as in permanent dentition, respectively. To assess applicability of modified Angle's classification a cross-sectional preschool 2000 children population from central India; 3–6 years of age residing in Nagpur metropolitan city of Maharashtra state were selected randomly as per the inclusion and exclusion criteria. Results: Majority 93.35% children were found to have bilateral Class i followed by 2.5% bilateral Class ii and 0.2% bilateral half cusp Class iii molar relationships as per the modified Angle's classification for primary dentition. About 3.75% children had various combinations of Class ii relationships and 0.2% children were having Class iii subdivision relationship. Conclusions: Modification of Angle's classification for application in primary dentition has been proposed. A cross-sectional investigation using new classification revealed various 6.25% Class ii and 0.4% Class iii molar relationships cases in preschool children population in a metropolitan city of Nagpur. Application of the modified Angle's classification to other population groups is warranted to validate its routine application in clinical pediatric dentistry. PMID:29326514

Breastfeeding, Bottle Feeding Practices and Malocclusion in the Primary Dentition: A Systematic Review of Cohort Studies

PubMed Central

Hermont, Ana Paula; Martins, Carolina C.; Zina, Lívia G.; Auad, Sheyla M.; Paiva, Saul M.; Pordeus, Isabela A.

2015-01-01

The World Health Organization recommends exclusive breast feeding for at least six months. However, there is no scientific evidence of the benefits of breast feeding for oral health in children under primary dentition. This study aimed to search for scientific evidence regarding the following question: is bottle feeding associated with malocclusion in the primary dentition compared to children that are breastfed? An electronic search was performed in seven databases. The systematic review included 10 cohort studies. It was not possible to conduct meta-analysis; therefore a qualitative analysis was assessed. The majority of studies evaluated feeding habits by means of questionnaires and conducted a single examination. Three studies observed that bottle feeding was significantly associated with overjet and posterior crossbite. Studies reported several cut-off times for breastfeeding (varying from 1 month up to 3 years of age) and several types of malocclusion. Controlling for non-nutritive sucking habits was reported for only half of the studies and this may have led to biased results. The scientific evidence could not confirm a specific type of malocclusion associated with the feeding habits or an adequate time of breastfeeding to benefit the children against malocclusion. Further cohort studies are needed to confirm this evidence. PMID:25785498

Effect of impeded medial longitudinal arch drop on vertical ground reaction force and center of pressure during static loading.

PubMed

Chen, Shing-Jye; Gielo-Perczak, Krystyna

2011-01-01

Arch supports commonly used to alleviate foot pain can impede the normal drop of medial longitudinal arch (MLA) thereby altering its function. The purpose of the study was to examine the effect of using arch supports on vertical ground reaction force (GRF) and center of pressure (COP) during simulated midstance while the foot was statically loaded. Ten healthy young subjects were recruited. Two dimensional (2D) analysis of the MLA was captured for both barefoot (BF) and arch support conditions before and after loading via a custom made weight loading apparatus. The foot was loaded and positioned to simulate the midstance phase of walking. Two-dimensional reflective markers demarcated the MLA and captured with the loaded foot on a force platform. The impeded MLA drop was compared between the unloaded BF, loaded BF and loaded arch support conditions. The vertical GRF, the anterior-posterior and the medial-lateral COP displacements were also measured in response to the impeded MLA by the arch supports. The arch supports impeded the MLA drop (p<0.05) and shifted the COP toward the medial side (p<0.05), specifically for the rearfoot (calcaneal segment region), but no changes were determined for the vertical GRF (p>0.05). The impedance of MLA drop by the arch support altered the pattern of the ML COP shift in the rearfoot region. The use of arch supports may not relieve painful foot conditions that are associated with excessive calcaneal eversion indicated by altering COP shifts in localized foot regions.

[Peculiarities of visual perception of dentition and smile aesthetic parameters].

PubMed

Riakhovskiĭ, A N; Usanova, E V

2007-01-01

As the result of the studies it was determined in which limits the dentition central line displacement from the face middle line and the change of smile line tilt angle become noticeable for visual perception. And also how much visual perception of the dentition aesthetic parameters were differed in doctors with different experience, dental technicians and patients.

Influences on Early and Medium-Term Survival Following Surgical Repair of the Aortic Arch

PubMed Central

Bashir, Mohamad; Field, Mark; Shaw, Matthew; Fok, Matthew; Harrington, Deborah; Kuduvalli, Manoj; Oo, Aung

2014-01-01

Objectives: It is now well established by many groups that surgery on the aortic arch may be achieved with consistently low morbidity and mortality along with relatively good survival compared to estimated natural history for a number of aortic arch pathologies. The objectives of this study were to: 1) report, compare, and analyze our morbidity and mortality outcomes for hemiarch and total aortic arch surgery; 2) examine the survival benefit of hemiarch and total aortic arch surgery compared to age- and sex-matched controls; and 3) define factors which influence survival in these two groups and, in particular, identify those that are modifiable and potentially actionable. Methods: Outcomes from patients undergoing surgical resection of both hemiarch and total aortic arch at the Liverpool Heart and Chest Hospital between June 1999 and December 2012 were examined in a retrospective analysis of data collected for The Society for Cardiothoracic Surgeons (UK). Results: Over the period studied, a total of 1240 patients underwent aortic surgery, from which 287 were identified as having undergone hemi to total aortic arch surgery under deep or moderate hypothermic circulatory arrest. Twenty three percent of patients' surgeries were nonelective. The median age at the time of patients undergoing elective hemiarch was 64.3 years and total arch was 65.3 years (P = 0.25), with 40.1% being female in the entire group. A total of 140 patients underwent elective hemiarch replacement, while 81 underwent elective total arch replacement. Etiology of the aortic pathology was degenerative in 51.2% of the two groups, with 87.1% requiring aortic valve repair in the elective hemiarch group and 64.2% in the elective total arch group (P < 0.001). Elective in-hospital mortality was 2.1% in the hemiarch group and 6.2% (P = 0.15) in the total arch group with corresponding rates of stroke (2.9% versus 4.9%, P = 0.47), renal failure (4.3% versus 6.2%, P = 0.54), reexploration for bleeding (4.3% versus 4.9%, P > 0.99), and prolonged ventilation (8.6% versus 16.1%, P = 0.09). Overall mortality was 20.9% at 5 years, while it was 15.7% in the elective hemiarch and 25.9% in the total arch group (P = 0.065). Process control charts demonstrated stability of annualized mortality outcomes over the study period. Survival curve was flat and parallel compared to age- and sex-matched controls beyond 2 years. Multivariate analysis demonstrated the following independent factors associated with survival: renal dysfunction [hazard ratio (HR) = 3.11; 95% confidence interval (CI) = 1.44-6.73], New York Heart Association (NYHA) class ≥ III (HR = 2.25; 95% CI = 1.38-3.67), circulatory arrest time > 100 minutes (HR = 2.92; 95% CI = 1.57-5.43), peripheral vascular disease (HR = 2.44; 95% CI = 1.25-4.74), and concomitant coronary artery bypass graft operation (HR = 2.14; 95% CI = 1.20-3.80). Conclusions: Morbidity, mortality, and medium-term survival were not statistically different for patients undergoing elective hemi-aortic arch and total aortic arch surgery. The survival curve in this group of patients is flat and parallel to sex- and age-matched controls beyond 2 years. Multivariate analysis identified independent influences on survival as renal dysfunction, NYHA class ≥ III, circulatory arrest time (> 100 min), peripheral vascular disease, and concomitant coronary artery bypass grafting. Focus on preoperative optimization of some of these variables may positively influence long-term survival. PMID:26798716

Design and application of hybrid maxillomandibular fixation for facial bone fractures.

PubMed

Park, Kang-Nam; Oh, Seung-Min; Lee, Chang-Youn; Kim, Jwa-Young; Yang, Byoung-Eun

2013-01-01

A novel maxillomandibular fixation (MMF) procedure using a skeletal anchorage screw (SAS) (in the maxilla) and an arch bar (in the mandible), which we call "hybrid maxillomandibular fixation," was explored in this study. The aims of the study were to examine the efficacy of our hybrid MMF method and to compare periodontal tissue health and occlusal rehabilitation among 3 MMF methods. In total, 112 patients who had undergone open reduction at the Department of Oral and Maxillofacial Surgery between September 2005 and December 2012 were selected for this study. The participants were assigned to one of the following groups: SAS (maxilla), SAS (mandible), SAS-arch bar, or arch bar-arch bar. Periodontal health was evaluated using the Gingival Index, and the perioperative occlusal reproducibility was evaluated using a score of 1 to 3. Statistical analysis was performed using parametric tests (Student t test or 1-way analysis of variance followed by post hoc Tukey test). In the Gingival Index comparison performed 1 month after the surgery, only the group using the arch bars and wiring was significantly different from the other groups (P < 0.05). The occlusal reproducibility scores were not significantly different. The pain and discomfort of the patients were reduced in the hybrid MMF group. The hybrid MMF takes advantage of MMF using both arch bars and SASs for mandibular fractures. In addition, it overcomes many problems presented by previous MMF methods.

Water Fluoridation and Dental Caries in U.S. Children and Adolescents.

PubMed

Slade, G D; Grider, W B; Maas, W R; Sanders, A E

2018-05-01

Fluoridation of America's drinking water was among the great public health achievements of the 20th century. Yet there is a paucity of studies from the past 3 decades investigating its dental health benefits in the U.S. This cross-sectional study sought to evaluate associations between availability of community water fluoridation (CWF) and dental caries experience in the U.S. child and adolescent population. County-level estimates of the percentage of population served by CWF (% CWF) from the Centers for Disease Control and Prevention's Water Fluoridation Reporting System were merged with dental examination data from 10 y of National Health and Nutrition Examination Surveys (1999 to 2004 and 2011 to 2014). Dental caries experience in the primary dentition (decayed and filled tooth surfaces [dfs]) was calculated for 7,000 children aged 2 to 8 y and in the permanent dentition (decayed, missing, and filled tooth surfaces [DMFS]) for 12,604 children and adolescents aged 6 to 17 y. Linear regression models estimated associations between % CWF and dental caries experience with adjustment for sociodemographic characteristics: age, sex, race/ethnicity, rural-urban location, head-of-household education, and period since last dental visit. Sensitivity analysis excluded counties fluoridated after 1998. In unadjusted analysis, caries experience in the primary dentition was lower in counties with ≥75% CWF (mean dfs = 3.3; 95% confidence limit [CL] = 2.8, 3.7) than in counties with <75% CWF (mean dfs = 4.6; 95% CL = 3.9, 5.4), a prevented fraction of 30% (95% CL = 11, 48). The difference was also statistically significant, although less pronounced, in the permanent dentition: mean DMFS (95% CL) was 2.2 (2.0, 2.4) and 1.9 (1.8, 2.1), respectively, representing a prevented fraction of 12% (95% CL = 1, 23). Statistically significant associations likewise were seen when % CWF was modeled as a continuum, and differences tended to increase in covariate-adjusted analysis and in sensitivity analysis. These findings confirm a substantial caries-preventive benefit of CWF for U.S. children and that the benefit is most pronounced in primary teeth.

Total Arch versus Hemiarch Replacement for Type A Acute Aortic Dissection: A Single-Center Experience.

PubMed

Lio, Antonio; Nicolò, Francesca; Bovio, Emanuele; Serrao, Andrea; Zeitani, Jacob; Scafuri, Antonio; Chiariello, Luigi; Ruvolo, Giovanni

2016-12-01

We retrospectively evaluated early and intermediate outcomes of aortic arch surgery in patients with type A acute aortic dissection (AAD), investigating the effect of arch surgery extension on postoperative results. From January 2006 through July 2013, 201 patients with type A AAD underwent urgent corrective surgery at our institution. Of the 92 patients chosen for this study, 59 underwent hemiarch replacement (hemiarch group), and 33 underwent total arch replacement (total arch group) in conjunction with ascending aorta replacement. The operative mortality rate was 22%. Total arch replacement was associated with a 33% risk of operative death, versus 15% for hemiarch ( P =0.044). Multivariable analysis found these independent predictors of operative death: age (odds ratio [OR]=1.13/yr; 95% confidence interval [CI], 1.04-1.23; P =0.002), body mass index >30 kg/m 2 (OR=9.9; 95% CI, 1.28-19; P =0.028), postoperative low cardiac output (OR=10.6; 95% CI, 1.18-25; P =0.035), and total arch replacement (OR=8.8; 95% CI, 1.39-15; P =0.021) The mean overall 5-year survival rate was 59.3% ± 5.5%, and mean 5-year freedom from distal reintervention was 95.4% ± 3.2% ( P =NS). In type A AAD, aortic arch surgery is still associated with high operative mortality rates; hemiarch replacement can be performed more safely than total arch replacement. Rates of distal aortic reoperation were not different between the 2 surgical strategies.

The mandibular symphysis as a starting point for the occlusal-level reconstruction of panfacial fractures with bicondylar fractures and interruption of the maxillary and mandibular arches: report of two cases.

PubMed

Pau, Mauro; Reinbacher, Knut Ernst; Feichtinger, Matthias; Navysany, Kawe; Kärcher, Hans

2014-06-01

Panfacial fractures represent a challenge, even for experienced maxillofacial surgeons, because all references for reconstructing the facial skeleton are missing. Logical reconstructive sequencing based on a clear understanding of the correlation between projection and the widths and lengths of facial subunits should enable the surgeon to achieve correct realignment of the bony framework of the face and to prevent late deformity and functional impairment. Reconstruction is particularly challenging in patients presenting with concomitant fractures at the Le Fort I level and affecting the palate, condyles, and mandibular symphysis. In cases without bony loss and sufficient dentition, we believe that accurate fixation of the mandibular symphysis can represent the starting point of a reconstructive sequence that allows successful reconstruction at the Le Fort I level. Two patients were treated in our department by reconstruction starting in the occlusal area through repair of the mandibular symphysis. Both patients considered the postoperative facial shape and profile to be satisfactory and comparable to the pre-injury situation. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Integration of Digital Dental Casts in Cone-Beam Computed Tomography Scans

PubMed Central

Rangel, Frits A.; Maal, Thomas J. J.; Bergé, Stefaan J.; Kuijpers-Jagtman, Anne Marie

2012-01-01

Cone-beam computed tomography (CBCT) is widely used in maxillofacial surgery. The CBCT image of the dental arches, however, is of insufficient quality to use in digital planning of orthognathic surgery. Several authors have described methods to integrate digital dental casts into CBCT scans, but all reported methods have drawbacks. The aim of this feasibility study is to present a new simplified method to integrate digital dental casts into CBCT scans. In a patient scheduled for orthognathic surgery, titanium markers were glued to the gingiva. Next, a CBCT scan and dental impressions were made. During the impression-taking procedure, the titanium markers were transferred to the impression. The impressions were scanned, and all CBCT datasets were exported in DICOM format. The two datasets were matched, and the dentition derived from the scanned impressions was transferred to the CBCT of the patient. After matching the two datasets, the average distance between the corresponding markers was 0.1 mm. This novel method allows for the integration of digital dental casts into CBCT scans, overcoming problems such as unwanted extra radiation exposure, distortion of soft tissues due to the use of bite jigs, and time-consuming digital data handling. PMID:23050159

SATB2-associated syndrome presenting with Rett-like phenotypes.

PubMed

Lee, J S; Yoo, Y; Lim, B C; Kim, K J; Choi, M; Chae, J-H

2016-06-01

The SATB2-associated syndrome (SAS) was proposed recently, after the SATB2 gene was initially discovered to be associated with isolated cleft palate. This syndrome is characterized by intellectual disability with delayed speech development, facial dysmorphism, cleft or high-arched palate, and dentition problems. Here, we describe two novel SATB2 sequence variants in two unrelated patients presenting with Rett-like phenotypes. We performed trio-based whole-exome sequencing in a 17-month-old girl presenting with severe retardation and Rett-like phenotypes, which revealed a de novo missense variant in SATB2 (p.Glu396Gln). Moreover, targeted sequencing of the SATB2 gene was performed in a 2-year-old girl with severe psychomotor retardation, facial hypotonia, and cleft palate who also exhibited some features of Rett syndrome. A nonsense variant in SATB2 was identified in this patient (p.Arg459*). This study expanded the clinical and genetic spectrum of SAS. SATB2 variants should be considered in cases with psychomotor retardation alone or in any cases with Rett-like phenotypes, regardless of the typical features of SAS such as cleft palate. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Clinical evaluation of immediate loading of titanium orthodontic implants

PubMed Central

Chopra, S.S.; Chakranarayan, A.

2015-01-01

Background Skeletal anchorage using dental implants, miniplates, miniscrews and microscrews provides an absolute anchorage for tooth movement. Miniscrew and microscrew implants have many benefits such as ease of placement and removal and immediate orthodontic force application. Methods Fifteen subjects in the permanent dentition with an overjet ≥6 mm received treatment with the 0.018-inch pre-adjusted edgewise appliance system (Roth prescription) and extraction of all first premolars. Titanium orthodontic implants were placed in both the upper quadrants and were immediately loaded with elastic chain from the implant head to the sectional arch wire. Result The overall success rate of immediate loaded titanium orthodontic micro implants (OMI) in the present study was 83.33%, with a mean chairside time of 15.33 min of placing two implants in each patient. Peri-implant inflammation was the only complication observed. Most failures were in the initial part of the study. There was no significant difference in the success rate of implants based on sex, side of placement (right or left) and type of malocclusion. Conclusion The OMIs used in the present study proved to be effective and well tolerated in producing immediate orthodontic anchorage for the retraction. PMID:25859080

USE OF ORTHODONTIC TREATMENT NEEDS INDICES FOR ORAL HEALTH SURVEY.

PubMed

Nakas, Enita; Tiro, Alisa; Vrazalica, Lejla Redzepagic; Hadzihasanovic, Dzana; Dzemidzic, Vildana

2016-04-01

The aim of our study is to compare incidence of orthodontic malocclusion based on occlusal indices and Index of Orthodontic Treatment Need (IOTN), and to evaluate the most commonly used method among the dentists for orthodontic treatment in Sarajevo. The sample consisted of 110 (31 female and 79 male)subjects older than 16 years with complete permanent dentition. Subjects were examined according to Occlusal Index (Angle classification of malocclusion, overjet, overbite, dental arch crowding and tooth rotation) and IOTN index. We conduct survey regarding which indexes are used in deciding on orthodontic treatment need, among primary health care and Orthodontist. The present study show differences between the presence of malocclusion and treatment need as assessed by these two used indices. Based on the survey that we conduct all primary health care doctors use Occlusal Index to decide need for orthodontic treatment, more than 95% of orthodontic specialist use Occlusal Index for treatment need estimation. When measuring and grading treatment needs we should rely on Index of orthodontic treatment need. In such high demand for orthodontic treatment need it is necessary to establish need for the orthodontic treatment as fundamental, so that individuals with greatest treatment need can be assigned priority.

Effect of foot shape on the three-dimensional position of foot bones.

PubMed

Ledoux, William R; Rohr, Eric S; Ching, Randal P; Sangeorzan, Bruce J

2006-12-01

To eliminate some of the ambiguity in describing foot shape, we developed three-dimensional (3D), objective measures of foot type based on computerized tomography (CT) scans. Feet were classified via clinical examination as pes cavus (high arch), neutrally aligned (normal arch), asymptomatic pes planus (flat arch with no pain), or symptomatic pes planus (flat arch with pain). We enrolled 10 subjects of each foot type; if both feet were of the same foot type, then each foot was scanned (n=65 total). Partial weightbearing (20% body weight) CT scans were performed. We generated embedded coordinate systems for each foot bone by assuming uniform density and calculating the inertial matrix. Cardan angles were used to describe five bone-to-bone relationships, resulting in 15 angular measurements. Significant differences were found among foot types for 12 of the angles. The angles were also used to develop a classification tree analysis, which determined the correct foot type for 64 of the 65 feet. Our measure provides insight into how foot bone architecture differs between foot types. The classification tree analysis demonstrated that objective measures can be used to discriminate between feet with high, normal, and low arches. Copyright (c) 2006 Orthopaedic Research Society.

Difficulties in distinguishing between an atlas fracture and a congenital posterior atlas arch defect in postmortem analysis.

PubMed

Sanchis-Gimeno, Juan A; Blanco-Perez, Esther; Aparicio, Luis; Martinez-Soriano, Francisco; Martinez-Sanjuan, Vicente

2014-09-01

We found one atlas from a sample of 148 skeletons (0.67%) that presented different anatomical variations which made it difficult to determine whether the vertebra had an atlas fracture, an unusual Type B posterior atlas arch defect, or a combination of both. We carried out a stereomicroscopy, radiographic, and computerized tomography scan study that revealed that the dry atlas we found presented a very uncommon congenital Type B posterior atlas arch defect, simulating a fracture. In short, the present paper has revealed that differentiating Type B posterior atlas arch defects from fractures in post-mortem dry vertebrae is more difficult than expected. Thus we believe that it can be easier than expected to mistake Type B posterior arch defects for fractures and vice versa in postmortem studies. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Interaction of arch type and footwear on running mechanics.

PubMed

Butler, Robert J; Davis, Irene S; Hamill, Joseph

2006-12-01

Running shoes are designed to accommodate various arch types to reduce the risk of lower extremity injuries sustained during running. Yet little is known about the biomechanical changes of running in the recommended footwear that may allow for a reduction in injuries. To evaluate the effects of motion control and cushion trainer shoes on running mechanics in low- and high-arched runners. Controlled laboratory study. Twenty high-arched and 20 low-arched recreational runners (>10 miles per week) were recruited for the study. Three-dimensional kinematic and kinetics were collected as subjects ran at 3.5 ms(-1) +/- 5% along a 25-m runway. The motion control shoe evaluated was the New Balance 1122, and the cushioning shoe evaluated was the New Balance 1022. Repeated-measures analyses of variance were used to determine if low- and high-arched runners responded differently to motion control and cushion trainer shoes. A significant interaction was observed in the instantaneous loading rate such that the low-arched runners had a lower instantaneous loading rate in the motion control condition, and the high-arched runners had a lower instantaneous loading rate in the cushion trainer condition. Significant main effects for shoe were observed for peak positive tibial acceleration, peak-to-peak tibial acceleration, mean loading rate, peak eversion, and eversion excursion. These results suggest that motion control shoes control rearfoot motion better than do cushion trainer shoes. In addition, cushion trainer shoes attenuate shock better than motion control shoes do. However, with the exception of instantaneous loading rate, these benefits do not differ between arch type. Running footwear recommendations should be based on an individual's running mechanics. If a mechanical analysis is not available, footwear recommendations can be based empirically on the individual's arch type.

Aortic Arch Pulse Wave Velocity Assessed by Magnetic Resonance Imaging as a Predictor of Incident Cardiovascular Events: The MESA (Multi-Ethnic Study of Atherosclerosis).

PubMed

Ohyama, Yoshiaki; Ambale-Venkatesh, Bharath; Noda, Chikara; Kim, Jang-Young; Tanami, Yutaka; Teixido-Tura, Gisela; Chugh, Atul R; Redheuil, Alban; Liu, Chia-Ying; Wu, Colin O; Hundley, W Gregory; Bluemke, David A; Guallar, Eliseo; Lima, Joao A C

2017-09-01

The predictive value of aortic arch pulse wave velocity (PWV) assessed by magnetic resonance imaging for cardiovascular disease (CVD) events has not been fully established. The aim of the present study was to evaluate the association of arch PWV with incident CVD events in MESA (Multi-Ethnic Study of Atherosclerosis). Aortic arch PWV was measured using magnetic resonance imaging at baseline in 3527 MESA participants (mean age, 62±10 years at baseline; 47% men) free of overt CVD. Cox regression was used to evaluate the risk of incident CVD (coronary heart disease, stroke, transient ischemic attack, or heart failure) in relation to arch PWV adjusted for age, sex, race, and CVD risk factors. The median value of arch PWV was 7.4 m/s (interquartile range, 5.6-10.2). There was significant interaction between arch PWV and age for outcomes, so analysis was stratified by age categories (45-54 and >54 years). There were 456 CVD events during the 10-year follow-up. Forty-five to 54-year-old participants had significant association of arch PWV with incident CVD independent of CVD risk factors (hazard ratio, 1.44; 95% confidence interval, 1.07-1.95; P =0.018; per 1-SD increase for logarithmically transformed PWV), whereas >54-year group did not ( P =0.93). Aortic arch PWV assessed by magnetic resonance imaging is a significant predictor of CVD events among middle-aged (45-54 years old) individuals, whereas arch PWV is not associated with CVD among an elderly in a large multiethnic population. © 2017 American Heart Association, Inc.

Using kinematic reduction for studying grasping postures. An application to power and precision grasp of cylinders.

PubMed

Jarque-Bou, N; Gracia-Ibáñez, V; Sancho-Bru, J L; Vergara, M; Pérez-González, A; Andrés, F J

2016-09-01

The kinematic analysis of human grasping is challenging because of the high number of degrees of freedom involved. The use of principal component and factorial analyses is proposed in the present study to reduce the hand kinematics dimensionality in the analysis of posture for ergonomic purposes, allowing for a comprehensive study without losing accuracy while also enabling velocity and acceleration analyses to be performed. A laboratory study was designed to analyse the effect of weight and diameter in the grasping posture for cylinders. This study measured the hand posture from six subjects when transporting cylinders of different weights and diameters with precision and power grasps. The hand posture was measured using a Vicon(®) motion-tracking system, and the principal component analysis was applied to reduce the kinematics dimensionality. Different ANOVAs were performed on the reduced kinematic variables to check the effect of weight and diameter of the cylinders, as well as that of the subject. The results show that the original twenty-three degrees of freedom of the hand were reduced to five, which were identified as digit arching, closeness, palmar arching, finger adduction and thumb opposition. Both cylinder diameter and weight significantly affected the precision grasping posture: diameter affects closeness, palmar arching and opposition, while weight affects digit arching, palmar arching and closeness. The power-grasping posture was mainly affected by the cylinder diameter, through digit arching, closeness and opposition. The grasping posture was largely affected by the subject factor and this effect couldn't be attributed only to hand size. In conclusion, this kinematic reduction allowed identifying the effect of the diameter and weight of the cylinders in a comprehensive way, being diameter more important than weight. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

PubMed

Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

2015-12-01

In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3 mm. There was a 4° decrease in the mandibular plane angle to close the skeletal open bite. Retrospective sequential iterations (FEA animation) simulated the clinical response, as documented with longitudinal cephalometrics. The level of periodontal ligament stress was relatively uniform (<5 kPa) for all teeth in the mandibular arch segment. En-masse retraction of the mandibular arch is efficient for conservatively treating a skeletal Class III malocclusion. Posterior mandibular anchorage causes intrusion of the molars to close the vertical dimension of the occlusion and the mandibular plane angle. Instantaneous FEA as modeled here could be used to reasonably predict the clinical results of an applied load. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Vibration analysis of the Second Saikai Bridge—a concrete filled tubular (CFT) arch bridge

NASA Astrophysics Data System (ADS)

Yoshimura, Mistuhiro; Wu, Qingxiong; Takahashi, Kazuo; Nakamura, Shozo; Furukawa, Kazuyoshi

2006-02-01

Concrete-filled steel tubular (CFT) arch bridges have been rapidly developing in China since 1990. Research has focused on the static behavior, thermal stress and erection technique, however, and there has been very little research of natural vibrations and dynamic responses of these bridges. Japan's first CFT arch bridge in highway bridges, the Second Saikai Bridge, is now under construction in Nagasaki Prefecture. Furthermore, this bridge has a pedestrian bridge that is suspended under the girder, which is rare. Therefore, the natural vibration properties are examined, and the influence of pedestrian bridge structure on the natural vibration of main bridge is discussed first. Response analysis under a moving vehicle and pedestrian is carried out, and the response characteristics and response level are clarified. The natural vibrations and responses are compared to those of CFT arch bridges that have been constructed in China. Results show the fine performance of both main bridge and pedestrian bridge of the Second Saikai Bridge.

[Effect of 2 methods of occlusion adjustment on occlusal balance and muscles of mastication in patient with implant restoration].

PubMed

Wang, Rong; Xu, Xin

2015-12-01

To compare the effect of 2 methods of occlusion adjustment on occlusal balance and muscles of mastication in patients with dental implant restoration. Twenty patients, each with a single edentulous posterior dentition with no distal dentition were selected, and divided into 2 groups. Patients in group A underwent original occlusion adjustment method and patients in group B underwent occlusal plane reduction technique. Ankylos implants were implanted in the edentulous space in each patient and restored with fixed prosthodontics single unit crown. Occlusion was adjusted in each restoration accordingly. Electromyograms were conducted to determine the effect of adjustment methods on occlusion and muscles of mastication 3 months and 6 months after initial restoration and adjustment. Data was collected and measurements for balanced occlusal measuring standards were obtained, including central occlusion force (COF), asymmetry index of molar occlusal force(AMOF). Balanced muscles of mastication measuring standards were also obtained including measurements from electromyogram for the muscles of mastication and the anterior bundle of the temporalis muscle at the mandibular rest position, average electromyogram measurements of the anterior bundle of the temporalis muscle at the intercuspal position(ICP), Astot, masseter muscle asymmetry index, and anterior temporalis asymmetry index (ASTA). Statistical analysis was performed using Student 's t test with SPSS 18.0 software package. Three months after occlusion adjustment, parameters of the original occlusion adjustment method were significantly different between group A and group B in balanced occlusal measuring standards and balanced muscles of mastication measuring standards. Six months after occlusion adjustment, parameters of the original occlusion adjustment methods were significantly different between group A and group B in balanced muscles of mastication measuring standards, but was no significant difference in balanced occlusal measuring standards. Using occlusion plane reduction adjustment technique, it is possible to obtain occlusion index and muscles of mastication's electromyogram index similar to the opposite side's natural dentition in patients with single unit fix prosthodontics crown and single posterior edentulous dentition without distal dentitions.

NON-INVASIVE 3D FACIAL ANALYSIS AND SURFACE ELECTROMYOGRAPHY DURING FUNCTIONAL PRE-ORTHODONTIC THERAPY: A PRELIMINARY REPORT

PubMed Central

Tartaglia, Gianluca M.; Grandi, Gaia; Mian, Fabrizio; Sforza, Chiarella; Ferrario, Virgilio F.

2009-01-01

Objectives: Functional orthodontic devices can modify oral function thus permitting more adequate growth processes. The assessment of their effects should include both facial morphology and muscle function. This preliminary study investigated whether a preformed functional orthodontic device could induce variations in facial morphology and function along with correction of oral dysfunction in a group of orthodontic patients in the mixed and early permanent dentitions. Material and Methods: The three-dimensional coordinates of 50 facial landmarks (forehead, eyes, nose, cheeks, mouth, jaw and ears) were collected in 10 orthodontic male patients aged 8-13 years, and in 89 healthy reference boys of the same age. Soft tissue facial angles, distances, and ratios were computed. Surface electromyography of the masseter and temporalis muscles was performed, and standardized symmetry, muscular torque and activity were calculated. Soft-tissue facial modifications were analyzed non-invasively before and after a 6-month treatment with a functional device. Comparisons were made with z-scores and paired Student's t-tests. Results: The 6-month treatment stimulated mandibular growth in the anterior and inferior directions, with significant variations in three-dimensional facial divergence and facial convexity. The modifications were larger in the patients than in reference children. In several occasions, the discrepancies relative to the norm became not significant after treatment. No significant variations in standardized muscular activity were found. Conclusions: Preliminary results showed that the continuous and correct use of the functional device induced measurable intraoral (dental arches) and extraoral (face) morphological modifications. The device did not modify the functional equilibrium of the masticatory muscles. PMID:19936531

Non-invasive 3D facial analysis and surface electromyography during functional pre-orthodontic therapy: a preliminary report.

PubMed

Tartaglia, Gianluca M; Grandi, Gaia; Mian, Fabrizio; Sforza, Chiarella; Ferrario, Virgilio F

2009-01-01

Functional orthodontic devices can modify oral function thus permitting more adequate growth processes. The assessment of their effects should include both facial morphology and muscle function. This preliminary study investigated whether a preformed functional orthodontic device could induce variations in facial morphology and function along with correction of oral dysfunction in a group of orthodontic patients in the mixed and early permanent dentitions. The three-dimensional coordinates of 50 facial landmarks (forehead, eyes, nose, cheeks, mouth, jaw and ears) were collected in 10 orthodontic male patients aged 8-13 years, and in 89 healthy reference boys of the same age. Soft tissue facial angles, distances, and ratios were computed. Surface electromyography of the masseter and temporalis muscles was performed, and standardized symmetry, muscular torque and activity were calculated. Soft-tissue facial modifications were analyzed non-invasively before and after a 6-month treatment with a functional device. Comparisons were made with z-scores and paired Student's t-tests. The 6-month treatment stimulated mandibular growth in the anterior and inferior directions, with significant variations in three-dimensional facial divergence and facial convexity. The modifications were larger in the patients than in reference children. In several occasions, the discrepancies relative to the norm became not significant after treatment. No significant variations in standardized muscular activity were found. Preliminary results showed that the continuous and correct use of the functional device induced measurable intraoral (dental arches) and extraoral (face) morphological modifications. The device did not modify the functional equilibrium of the masticatory muscles.

A comparative analysis of salivary factors and maxillary denture retention in different arch forms: An in vivo study.

PubMed

Shekhar, Abhishek; Das, Samiran; Bhattacharyya, Jayanta; Goel, Preeti; Majumdar, Sayan; Ghosh, Soumitra

2018-01-01

This study aims to find the effect of change in different salivary factors before and after complete denture insertion and to measure the maxillary denture retention in different arch forms. Thirty completely edentulous individuals (10 each of square, tapered, and ovoid arch form of maxilla) belonging to the age group of 40-70 years were selected. Salivary factors (flow, density, pH, viscosity, and total protein) were evaluated before and after denture insertion. Retention of maxillary denture was measured in all the different arch forms. Student's independent sample's t -test was applied. The correlation was analyzed by Pearson's correlation analysis. While mean flow rate and pH of saliva increased, mean viscosity, total protein, and density of saliva decreased after maxillary complete denture insertion. A positive correlation was found between retention and total maxillary basal surface area. Retention value was found to be greatest in square type and least in tapered type. Complete denture acts as a mechanical stimulant thus increasing flow rate and pH immediately after complete denture insertion. Density, total protein, and viscosity of saliva decreased after complete denture insertion which may be due to increase in water content of saliva. The retention of maxillary complete denture does not seem to depend on the rate of change of the salivary factors, before and after complete denture insertion. Total basal surface area and maxillary denture retention values were highest in square arch form and least in tapered arch form.

Effect of variation of impression material combinations, dual arch tray types, and sequence of pour on the accuracy of working dies: "An in vitro study".

PubMed

Reddy, Nagam Raja; Reddy, Jakranpally Sathya; Padmaja, Bramha Josyula Indira; Reddy, Budigi Madan Mohan; Sunil, Motupalli; Reddy, Bommireddy Tejeswar

2016-01-01

To evaluate the accuracy of dies made from dual arch impressions using different sectional dual arch trays, combinations of elastomeric impression materials, and the sequence of pour of dies. The dual arch impression materials were grouped into three groups depending on the combination of impression materials used and each group is subdivided into four subgroups. A sample size of 8 in each subgroup yielding a total 96 impressions will be made into three groups of 32 each (Group I, II, and III). Group I constitute impressions made using monophase (M) impression material, Group II constitute impressions made using combination of heavy body and light body (HL), and Group III constitute impressions made using combination of putty and light body (PL). Dies obtained were evaluated with a travelling microscope to measure the buccolingual width of the tooth at the margin by using the sharp corners of the notches as reference points. Descriptive analysis namely mean and standard deviation, one-way analysis of variance test. The results obtained in this study indicate that though not statistically significant, the metal dual arch trays performed better when compared to the plastic trays in reproducing die dimensions. From the results obtained, dies poured from combination of heavy body and light body impressions using plastic or metal dual arch trays showed least variation in bucco-lingual dimension from master model.

BASE Flexible Array Preliminary Lithospheric Structure Analysis

NASA Astrophysics Data System (ADS)

Yeck, W. L.; Sheehan, A. F.; Anderson, M. L.; Siddoway, C. S.; Erslev, E.; Harder, S. H.; Miller, K. C.

2009-12-01

The Bighorns Arch Seismic Experiment (BASE) is a Flexible Array experiment integrated with EarthScope. The goal of BASE is to develop a better understanding of how basement-involved foreland arches form and what their link is to plate tectonic processes. To achieve this goal, the crustal structure under the Bighorn Mountain range, Bighorn Basin, and Powder River Basin of northern Wyoming and southern Montana are investigated through the deployment of 35 broadband seismometers, 200 short period seismometers, 1600 “Texan” instruments using active sources and 800 “Texan” instruments monitoring passive sources, together with field structural analysis of brittle structures. The novel combination of these approaches and anticipated simultaneous data inversion will give a detailed structural crustal image of the Bighorn region at all levels of the crust. Four models have been proposed for the formation of the Bighorn foreland arch: subhorizontal detachment within the crust, lithospheric buckling, pure shear lithospheric thickening, and fault blocks defined by lithosphere-penetrating thrust faults. During the summer of 2009, we deployed 35 broadband instruments, which have already recorded several magnitude 7+ teleseismic events. Through P wave receiver function analysis of these 35 stations folded in with many EarthScope Transportable Array stations in the region, we present a preliminary map of the Mohorovicic discontinuity. This crustal map is our first test of how the unique Moho geometries predicted by the four hypothesized models of basement involved arches fit seismic observations for the Bighorn Mountains. In addition, shear-wave splitting analysis for our first few recorded teleseisms helps us determine if strong lithospheric deformation is preserved under the range. These analyses help lead us to our final goal, a complete 4D (3D spatial plus temporal) lithospheric-scale model of arch formation which will advance our understanding of the mechanisms accommodating and driving basement-involved arch formation as well as continental lithospheric rheology.

Long-Term Clinical Response to Treatment and Maintenance of Localized Aggressive Periodontitis: A Cohort Study

PubMed Central

Miller, Karina A. F. S.; Branco-de-Almeida, Luciana S.; Wolf, Sandra; Hovencamp, Nicole; Treloar, Tina; Harrison, Peter; Aukhil, Ikramuddin; Gong, Yan; Shaddox, Luciana M.

2016-01-01

Aim To evaluate long-term clinical response to periodontal therapy and maintenance in localized aggressive periodontitis (LAP). Materials and Methods One hundred forty-one African-Americans diagnosed with LAP, aged 5–25 years, were enrolled. Patients underwent periodontal mechanical debridement plus one week of amoxicillin/metronidazole. Mechanical therapy was repeated as needed and clinical parameters were recorded at baseline, 3, 6, 12, 18, and 24 months, and 2 additional annual follow-up visits after treatment. Radiographs from primary dentition of patients with LAP in permanent dentition, and additional healthy siblings (HS) were analyzed retrospectively. Results Periodontal therapy significantly improved probing depth and clinical attachment level up to 4 years (mean reductions: 2.18 ± 1.03 and 2.80 ± 1.43 mm, respectively). Percentage of affected sites was reduced at all timepoints and maintained up to 4 years. Noncompliance with antibiotics/appointments negatively affected the treatment response. Ninety percent of LAP patients in permanent dentition and 32% of HS presented radiographic bone loss in primary dentition. Conclusions Mechanical debridement with one-week of systemic antibiotics along with proper periodontal maintenance was effective in the treatment and successful maintenance of LAP for up to 4 years. LAP in permanent dentition may be preceded in the primary dentition. Clinicaltrials.gov #NCT01330719. PMID:27767222

Development and evolution of dentition pattern and tooth order in the skates and rays (batoidea; chondrichthyes).

PubMed

Underwood, Charlie J; Johanson, Zerina; Welten, Monique; Metscher, Brian; Rasch, Liam J; Fraser, Gareth J; Smith, Moya Meredith

2015-01-01

Shark and ray (elasmobranch) dentitions are well known for their multiple generations of teeth, with isolated teeth being common in the fossil record. However, how the diverse dentitions characteristic of elasmobranchs form is still poorly understood. Data on the development and maintenance of the dental patterning in this major vertebrate group will allow comparisons to other morphologically diverse taxa, including the bony fishes, in order to identify shared pattern characters for the vertebrate dentition as a whole. Data is especially lacking from the Batoidea (skates and rays), hence our objective is to compile data on embryonic and adult batoid tooth development contributing to ordering of the dentition, from cleared and stained specimens and micro-CT scans, with 3D rendered models. We selected species (adult and embryonic) spanning phylogenetically significant batoid clades, such that our observations may raise questions about relationships within the batoids, particularly with respect to current molecular-based analyses. We include developmental data from embryos of recent model organisms Leucoraja erinacea and Raja clavata to evaluate the earliest establishment of the dentition. Characters of the batoid dentition investigated include alternate addition of teeth as offset successional tooth rows (versus single separate files), presence of a symphyseal initiator region (symphyseal tooth present, or absent, but with two parasymphyseal teeth) and a restriction to tooth addition along each jaw reducing the number of tooth families, relative to addition of successor teeth within each family. Our ultimate aim is to understand the shared characters of the batoids, and whether or not these dental characters are shared more broadly within elasmobranchs, by comparing these to dentitions in shark outgroups. These developmental morphological analyses will provide a solid basis to better understand dental evolution in these important vertebrate groups as well as the general plesiomorphic vertebrate dental condition.

How Arch Support Insoles Help Persons with Flatfoot on Uphill and Downhill Walking.

PubMed

Huang, Yu-Ping; Kim, Kwantae; Song, Chen-Yi; Chen, Yat-Hon; Peng, Hsien-Te

2017-01-01

The main purpose of this study was to investigate the effect of arch support insoles on uphill and downhill walking of persons with flatfoot. Sixteen healthy college students with flatfoot were recruited in this study. Their heart rate, peak oxygen uptake (VO 2 ), and median frequency (MDF) of surface electromyogram were recorded and analyzed. Nonparametric Wilcoxon signed-rank test was used for statistical analysis. The main results were as follows: (a) peak VO 2 significantly decreased with arch support insoles compared with flat insoles during uphill and downhill walking (arch support insole versus flat insole: uphill walking, 20.7 ± 3.6 versus 31.6 ± 5.5; downhill walking, 10.9 ± 2.3 versus 16.9 ± 4.2); (b) arch support insoles could reduce the fatigue of the rectus femoris muscle during downhill walking (MDF slope of arch support insole: 0.03 ± 1.17, flat insole: -6.56 ± 23.07); (c) insole hardness would increase not only the physical sensory input but also the fatigue of lower-limb muscles particularly for the rectus femoris muscle (MDF slope of arch support insole: -1.90 ± 1.60, flat insole: -0.83 ± 1.10) in persons with flatfoot during uphill walking. The research results show that arch support insoles could effectively be applied to persons with flatfoot to aid them during uphill and downhill walking.

Orthodontic space closure without counterbalancing extractions in patients with bilateral aplasia of the lower second premolars.

PubMed

Zimmer, Bernd; Rottwinkel, Yvonne

2002-09-01

Orthodontic space closure in situations with bilateral aplastic lower second premolars without maxillary extractions is a rarely practiced treatment method. Due to the high risk of severe side effects, preference is currently given to the maintenance of deciduous second molars and subsequent prosthodontic solutions. As a combination of Class I push and Class II pull mechanics seemed likely to reduce secondary effects by transferring the anchorage site from the reactive lower anterior teeth to the more resistant upper arch, a clinical study was carried out in order to investigate effects and secondary effects of the mechanics. Casts, panoramic radiographs and lateral headfilms of 13 consecutively treated, non-selected adolescents (seven boys, six girls, mean age at start of treatment 13 years 4 months) were evaluated. In six patients a Jasper Jumper trade mark was inserted in addition for a mean period of 6 months. The treatment outcome after a mean period of 3 years and 1 month showed in almost all cases the desired Class III molar occlusion of one cusp width (+/- 1/4 cw) with overbite and overjet within the normal range. Analyses of static and dynamic occlusion revealed anterior/canine protected articulation and a satisfactory number of centric contact points. A significant space gain (p

Seismic performance evaluation of an historical concrete deck arch bridge using survey and drawing of the damages, in situ tests, dynamic identification and pushover analysis

NASA Astrophysics Data System (ADS)

Bergamo, Otello; Russo, Eleonora; Lodolo, Fabio

2017-07-01

The paper describes the performance evaluation of a retrofit historical multi-span (RC) deck arch bridge analyzed with in situ tests, dynamic identification and FEM analysis. The peculiarity of this case study lies in the structural typology of "San Felice" bridge, an historical concrete arch bridge built in the early 20th century, a quite uncommon feature in Italy. The preservation and retrofit of historic cultural heritage and infrastructures has been carefully analyzed in the international codes governing seismic response. A complete survey of the bridge was carried out prior to sketching a drawing of the existing bridge. Subsequently, the study consists in four steps: material investigation and dynamic vibration tests, FEM analysis and calibration, retrofit assessment, pushover analysis. The aim is to define an innovative approach to calibrate the FEM analysis through modern experimental investigations capable of taking structural deterioration into account, and to offer an appropriate and cost-effective retrofitting strategy.

A novel sax-stent method in treatment of ascending aorta and aortic arch aneurysms evaluated by finite element simulations.

PubMed

Arokiaraj, M C; De Beule, M; De Santis, G

2017-02-01

A novel stent method to simplify treatment of proximal ascending aorta and aortic arch aneurysms was developed and investigated by finite element analysis. Therapy of ascending aortic and aortic arch aneurysms is difficult and challenging and is associated with various complications. A 55mm wide×120mm long stent was designed without the stent graft and the stent was deployed by an endovascular method in a virtual patient-specific aneurysm model. The stress-strain analysis and deployment characteristics were performed in a finite element analysis using the Abaqus software. The stent, when embedded in the aortic wall, significantly reduced aortic wall stresses, while preserving the side coronary ostia and side branches in the aortic arch. When tissue growth was modeled computationally over the stent struts the wall stresses in aorta was reduced. This effect became more pronounced when increasing the thickness of the tissue growth. There were no abnormal stresses in the aorta, coronary ostium and at the origin of aortic branches. The stent reduced aneurysm expansion cause by hypertensive condition from 2mm without stenting to 1.3mm after stenting and embedding. In summary, we uncovered a simple treatment method using a bare nitinol stent without stent graft in the treatment of the proximal aorta and aortic arch aneurysms, which could eventually replace the complex treatment methods for this disease. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Is Survival Time After Hemorrhage a Heritable, Quantitative Trait?: An Initial Assessment

DTIC Science & Technology

2008-06-01

The epidemiology of traumatic death. A population-based analysis. Arch Surg 128:571Y575, 1993. 5. Sauaia A, Moore FA, Moore EE, Moser KS, Brennan R...therapeutic goals and early warning of death. Arch Surg 106:630Y636, 1973. 752 SHOCK VOL. 29, NO. 6 KLEMCKE ET AL. Copyright @ 200 by the Shock...Hemorrhagic shock in rats. Measured blood volumes as the basis for the extent of hemorrhage. Arch Surg 99:484Y488, 1969. 19. Nose H, Morita M, Yawata T

Bedrock-surface altitude in the midwestern basins and arches region of Indiana, Ohio, Michigan, and Illinois

USGS Publications Warehouse

Bunner, Danny W.

1993-01-01

The Midwestern Basins and Arches Regional Aquifer-Systems Analysis (RASA) is one of 28 projects that were identified by Congress in 1978, after a period of severe drought, to be studied by the U.S. Geological Survey (Sun, 1984).  The Midwestern Basins and Arches RASA study area in parts of Indiana, Ohio, Michigan, and Illinois is defined by either the limestone-shale contact of rocks of Devonian age or by the contact of the land with surface-water bodies (fig. 1).

Clinical comparison and performance perspective of three aligning arch wires.

PubMed

Evans, T J; Jones, M L; Newcombe, R G

1998-07-01

To clinically evaluate three commonly used orthodontic tooth aligning arch wires: 016 x 022 inch active martensitic medium force nickel titanium, 016 x 022 inch graded force active martensitic nickel titanium, and 0.0155 inch multistrand stainless steel. A prospective randomized clinical trial. Measured serial study casts of dental arches for 112 assigned arch wires from 56 consecutive patients. Analysis based on completed records for 98 arch wires and 51 patients. A consecutive sample of 56 patients requiring both upper and lower fixed appliance therapy were randomly allocated two different arch wires from a possible three under trial. Good quality impressions were taken of the dental arches at the designated serial stages of alignment (start, T0; 4 weeks, T4; 8 weeks, T8). The resultant casts were measured on a Reflex Microscope to record the change in individual tooth alignment both in three and two dimensions (horizontal plane only). The measurement error was within acceptable limits (range, 0.05 to 0.09 mm) and showed no significant bias. ANOVA statistical models were fitted to the data to adjust for a number of variables. No significant difference in aligning capability (p > 0.05), in either two or three dimensions, was demonstrated between the three arch wires in the trial. Heat activated nickel titanium arch wires failed to demonstrate a better performance than the cheaper multistrand stainless steel wires in this randomized clinical trial. The failure to demonstrate in vivo superiority at the clinical level may be due to the confounding effects of large variations in individual metabolic response. Alternatively, it may be that in routine clinical practice NiTi-type wires are not sufficiently deformed to allow their full superelastic properties to come in to play during initial alignment.

Effect of arch type and Body Mass Index on plantar pressure distribution during stance phase of gait.

PubMed

O'Brien, Davida Louise; Tyndyk, Magdalena

2014-01-01

Several factors have been associated with the presence of abnormally high plantar foot pressure including: (i) increased body weight, (ii) foot structure and (iii) walking strategy. It is predicted that the biomechanics of the foot is influenced by the structure of the foot, primarily the Medial Longitudinal Arch. The objective of this study was to examine if Body Mass Index and the foot arch have a direct effect on dynamic peak plantar pressure for healthy subjects. Following a clinical lower limb examination, the Tekscan HR mat was utilised for this study, plantar pressure was profiled at specific events during stance phase of gait including heel strike, midstance and toe off. Results indicated to the preferable normal arch as this produced a low plantar pressure distribution in all cases. The 2nd and 3rd metatarsal head region recorded the highest pressure for all arch types during dynamic analysis. The lowest pressure for the normal and overweight BMI was at toe-off. While the obese BMI group showed highest pressure during toe-off. The obese BMI flat arch subcategory indicated to functional ambulation differences. Future work involves comparing this healthy database to a demographically matched diabetic group.

Lack of relationship between masticatory performance and nutritional status in adults with natural dentition.

PubMed

Flores-Orozco, Elan Ignacio; Tiznado-Orozco, Gaby Esthela; Osuna-González, Olga Dionicia; Amaro-Navarrete, Claudia Lucero; Rovira-Lastra, Bernat; Martinez-Gomis, Jordi

2016-11-01

This study assessed the relation among several aspects of the masticatory function and the nutritional status in adults with natural dentition. One hundred adults with natural dentition participated in this cross-sectional study. They performed one free-style masticatory test consisting of five trials of 20 silicon-chewing cycles. The preferred chewing side was determined by calculating the asymmetry index. Masticatory performance was determined by sieving the silicon particles, and the cycle duration was also recorded. Weight, body water percentage, body fat mass, muscle mass and osseous mass were measured using a portable digital weighing machine. Body mass index (BMI), waist-hip ratio, skinfold thickness and the upper-arm composition were determined. The relation between masticatory function and a nutritional variable were tested using Pearson or Spearman rank correlation coefficients or using analysis of variance or the Kruskal-Wallis H-test and the Mann-Whitney U test, as appropriate. Whereas body fat percentages for women were significantly higher than for men, the body mass index was higher in men than in women. Participants who were underweight chewed more asymmetrically and more slowly than normal weight or obese participants. A negative correlation was observed between body fat percentage and masticatory laterality. No relation between masticatory performance and any nutritional status indicator was detected. Being underweight and having a low body fat percentage seem to be related to a masticatory lateral asymmetry and to a large cycle duration in young adults with natural dentition. Masticatory performance does not seem to be related to nutritional status. Copyright © 2016 Elsevier Ltd. All rights reserved.

Association between Chewing Side Preference and Dental Caries among Deciduous, Mixed and Permanent Dentition.

PubMed

Nayak, Ullal Anand; Sharma, Reena; Kashyap, Nilotpol; Prajapati, Deepesh; Kappadi, Damodar; Wadhwa, Saakshe; Gandotra, Shina; Yadav, Poonam

2016-09-01

Chewing Side Preference (CSP) is said to occur when mastication is recognized exclusively/consistently or predominantly on the same side of the jaw. It can be assessed by using the direct method - visual observation and indirect methods by electric programs, such as cinematography, kinetography and computerized electromyography. The present study was aimed at evaluating the prevalence of CSP in deciduous, mixed and permanent dentitions and relating its association with dental caries. In a cross-sectional observational study, 240 school going children aged 3 to 18years were randomly allocated to three experimental groups according to the deciduous dentition, mixed dentition and permanent dentition period. The existence of a CSP was determined using a direct method by asking the children to chew on a piece of gum (trident sugarless). The Mann Whitney U-test was used to compare the CSP and also among the boys and girls. The Spearman's Correlation Coefficient was used to correlate CSP and dental caries among the three study groups and also among the groups. CSP was observed in 69%, 83% and 76% of children with primary, mixed and permanent dentition respectively (p>0.05). There was no statistically significant association between the presence of CSP and dental caries among the three study groups. There was a weak or no correlation between gender and distribution of CSP and between presence of CSP and dental caries.

Reassessing the Dlx code: the genetic regulation of branchial arch skeletal pattern and development

PubMed Central

Depew, Michael J; Simpson, Carol A; Morasso, Maria; Rubenstein, John LR

2005-01-01

The branchial arches are meristic vertebrate structures, being metameric both between each other within the rostrocaudal series along the ventrocephalic surface of the embryonic head and within each individual arch: thus, just as each branchial arch must acquire a unique identity along the rostrocaudal axis, each structure within the proximodistal axis of an arch must also acquire a unique identity. It is believed that regional specification of metameric structures is controlled by the nested expression of related genes resulting in a regional code, a principal that is though to be demonstrated by the regulation of rostrocaudal axis development in animals exerted by the nested HOM-C/Hox homeobox genes. The nested expression pattern of the Dlx genes within the murine branchial arch ectomesenchyme has more recently led to the proposal of a Dlx code for the regional specification along the proximodistal axis of the branchial arches (i.e. it establishes intra-arch identity). This review re-examines this hypothesis, and presents new work on an allelic series of Dlx loss-of-function mouse mutants that includes various combinations of Dlx1, Dlx2, Dlx3, Dlx5 and Dlx6. Although we confirm fundamental aspects of the hypothesis, we further report a number of novel findings. First, contrary to initial reports, Dlx1, Dlx2 and Dlx1/2 heterozygotes exhibit alterations of branchial arch structures and Dlx2−/− and Dlx1/2−/− mutants have slight alterations of structures derived from the distal portions of their branchial arches. Second, we present evidence for a role for murine Dlx3 in the development of the branchial arches. Third, analysis of compound Dlx mutants reveals four grades of mandibular arch transformations and that the genetic interactions of cis first-order (e.g. Dlx5 and Dlx6), trans second-order (e.g. Dlx5 and Dlx2) and trans third-order paralogues (e.g. Dlx5 and Dlx1) result in significant and distinct morphological differences in mandibular arch development. We conclude by integrating functions of the Dlx genes within the context of a hypothesized general mechanism for the establishment of pattern and polarity in the first branchial arch of gnathostomes that includes regionally secreted growth factors such as Fgf8 and Bmp and other transcription factors such as Msx1, and is consistent both with the structure of the conserved gnathostome jaw bauplan and the elaboration of this bauplan to meet organismal end-point designs. PMID:16313391

Multivariate analysis on unilateral cleft lip and palate treatment outcome by EUROCRAN index: A retrospective study.

PubMed

Yew, Ching Ching; Alam, Mohammad Khursheed; Rahman, Shaifulizan Abdul

2016-10-01

This study is to evaluate the dental arch relationship and palatal morphology of unilateral cleft lip and palate patients by using EUROCRAN index, and to assess the factors that affect them using multivariate statistical analysis. A total of one hundred and seven patients from age five to twelve years old with non-syndromic unilateral cleft lip and palate were included in the study. These patients have received cheiloplasty and one stage palatoplasty surgery but yet to receive alveolar bone grafting procedure. Five assessors trained in the use of the EUROCRAN index underwent calibration exercise and ranked the dental arch relationships and palatal morphology of the patients' study models. For intra-rater agreement, the examiners scored the models twice, with two weeks interval in between sessions. Variable factors of the patients were collected and they included gender, site, type and, family history of unilateral cleft lip and palate; absence of lateral incisor on cleft side, cheiloplasty and palatoplasty technique used. Associations between various factors and dental arch relationships were assessed using logistic regression analysis. Dental arch relationship among unilateral cleft lip and palate in local population had relatively worse scoring than other parts of the world. Crude logistics regression analysis did not demonstrate any significant associations among the various socio-demographic factors, cheiloplasty and palatoplasty techniques used with the dental arch relationship outcome. This study has limitations that might have affected the results, example: having multiple operators performing the surgeries and the inability to access the influence of underlying genetic predisposed cranio-facial variability. These may have substantial influence on the treatment outcome. The factors that can affect unilateral cleft lip and palate treatment outcome is multifactorial in nature and remained controversial in general. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Salivary Immunoglobulin Gene Expression in Patients with Caries

PubMed Central

Santín, Gema Regina Guadarrama; Salgado, Angel Visoso; Bastida, Norma Margarita Montiel; Gómez, Isaías de la Rosa; Benítez, Jonnathan Guadalupe Santillán; Zerón, Hugo Mendieta

2017-01-01

BACKGROUND: Immunoglobulins mediate the host’s humoral immune response are expressed in saliva. AIM: To quantify the FcαR, FcγRIIB, and FcαμR gene expression in the saliva of Mexican patients with caries in mixed and permanent dentition. SUBJECTS AND METHODS: This was a comparative cross-sectional study. mRNA was isolated from 200 μL of saliva following the RNA III Tissue Fresh-frozen protocol of the MagNA Pure LC Instrument 2.0 (Roche Diagnostics GmbH, Nederland BV) and the FcαR, FcαμR and FcγRIIB were quantified through TaqMan Assays. RESULTS: One hundred individuals, 50 with mixed dentition and 50 with permanent dentition, were included in the study. Statistically, it was found a significant difference (p = 0.025) in the IgG (FcγRIIB) expression between the studied groups. CONCLUSION: Although we confirmed the existence of FcαR, FcγRIIB and FcαμR gene expression in saliva, only a significant difference in the expression of FcγRIIB between the mixed dentition and permanent dentition was found. PMID:28507635

Prevalence of enamel defects in primary and permanent teeth in a group of schoolchildren from Granada (Spain).

PubMed

Robles, Maria-Jesús; Ruiz, Matilde; Bravo-Perez, Manuel; González, Encarnación; Peñalver, Maria-Angustias

2013-03-01

The purpose of this study was to determine and compare the prevalence and presentations of developmental defects of the enamel (DDE) in the primary and permanent dentitions of a group of healthy schoolchildren residing in Granada (Spain). A total of 1,414 healthy schoolchildren were examined using modified DDE criteria for recording enamel defects. The prevalence of DDE of any type was 40.2% in primary dentition and 52% in permanent dentition (p<0.033). Of the 31,820 primary and permanent teeth examined in the study, 699 (4.1%) primary and 1,232 (8.3%) permanent teeth had some form of DDE. Diffuse opacity was the most common type of DDE observed in primary teeth, and demarcated opacity in the permanent teeth. Enamel hypoplasia was the least prevalent defect in both dentition types. The study population showed a high prevalence of DDE in primary as well as in permanent dentition, reflecting the current increasing trend of this condition, which should be considered as a significant public health problem.

Hexa Helix: Modified Quad Helix Appliance to Correct Anterior and Posterior Crossbites in Mixed Dentition

PubMed Central

Yaseen, Syed Mohammed; Acharya, Ravindranath

2012-01-01

Among the commonly encountered dental irregularities which constitute developing malocclusion is the crossbite. During primary and mixed dentition phase, the crossbite is seen very often and if left untreated during these phases then a simple problem may be transformed into a more complex problem. Different techniques have been used to correct anterior and posterior crossbites in mixed dentition. This case report describes the use of hexa helix, a modified version of quad helix for the management of anterior crossbite and bilateral posterior crossbite in early mixed dentition. Correction was achieved within 15 weeks with no damage to the tooth or the marginal periodontal tissue. The procedure is a simple and effective method for treating anterior and bilateral posterior crossbites simultaneously. PMID:23119188

Oral Arginine Metabolism May Decrease the Risk for Dental Caries in Children

PubMed Central

Nascimento, M.M.; Liu, Y.; Kalra, R.; Perry, S.; Adewumi, A.; Xu, X.; Primosch, R.E.; Burne, R.A.

2013-01-01

Arginine metabolism by oral bacteria via the arginine deiminase system (ADS) increases the local pH, which can neutralize the effects of acidification from sugar metabolism and reduce the cariogenicity of oral biofilms. To explore the relationship between oral arginine metabolism and dental caries experience in children, we measured ADS activity in oral samples from 100 children and correlated it with their caries status and type of dentition. Supragingival dental plaque was collected from tooth surfaces that were caries-lesion-free (PF) and from dentinal (PD) and enamel (PE) caries lesions. Regardless of children’s caries status or type of dentition, PF (378.6) had significantly higher ADS activity compared with PD (208.4; p < .001) and PE (194.8; p = .005). There was no significant difference in the salivary arginolytic activity among children with different caries status. Mixed-model analysis showed that plaque caries status is significantly associated with ADS activity despite children’s age, caries status, and dentition (p < .001), with healthy plaque predicting higher ADS activity compared with diseased plaque. Plaque arginine metabolism varies greatly among children and tooth sites, which may affect their susceptibility to caries. PMID:23640952

Black stains in the mixed dentition: a PCR microbiological study of the etiopathogenic bacteria.

PubMed

Saba, C; Solidani, M; Berlutti, F; Vestri, A; Ottolenghi, L; Polimeni, A

2006-01-01

The aim of this work is to emphasize that particular stains on the third cervical of the buccal and lingual surfaces in mixed dentition, called "black stain." Previous research showed the microbiological etiology of this discoloration by chromogen bacterias. Our study shows bacteria spp involved in stains by means of PCR process and electrophoresis gel on the agarose medium. Sample was formed by 100 subject with black stain and 100 control subjects stain-free. A statistical analysis (SPSS 10.0) using X2 was performed in this study. Porphyromonas gingivalis and Prevotella melaninogenica, were not involved in both in black stain subjects and in the control. On the contrary, Actinomyces could be involved in the pigmentation process.

Mixed models and reduced/selective integration displacement models for nonlinear analysis of curved beams

NASA Technical Reports Server (NTRS)

Noor, A. K.; Peters, J. M.

1981-01-01

Simple mixed models are developed for use in the geometrically nonlinear analysis of deep arches. A total Lagrangian description of the arch deformation is used, the analytical formulation being based on a form of the nonlinear deep arch theory with the effects of transverse shear deformation included. The fundamental unknowns comprise the six internal forces and generalized displacements of the arch, and the element characteristic arrays are obtained by using Hellinger-Reissner mixed variational principle. The polynomial interpolation functions employed in approximating the forces are one degree lower than those used in approximating the displacements, and the forces are discontinuous at the interelement boundaries. Attention is given to the equivalence between the mixed models developed herein and displacement models based on reduced integration of both the transverse shear and extensional energy terms. The advantages of mixed models over equivalent displacement models are summarized. Numerical results are presented to demonstrate the high accuracy and effectiveness of the mixed models developed and to permit a comparison of their performance with that of other mixed models reported in the literature.

Variable-intercept panel model for deformation zoning of a super-high arch dam.

PubMed

Shi, Zhongwen; Gu, Chongshi; Qin, Dong

2016-01-01

This study determines dam deformation similarity indexes based on an analysis of deformation zoning features and panel data clustering theory, with comprehensive consideration to the actual deformation law of super-high arch dams and the spatial-temporal features of dam deformation. Measurement methods of these indexes are studied. Based on the established deformation similarity criteria, the principle used to determine the number of dam deformation zones is constructed through entropy weight method. This study proposes the deformation zoning method for super-high arch dams and the implementation steps, analyzes the effect of special influencing factors of different dam zones on the deformation, introduces dummy variables that represent the special effect of dam deformation, and establishes a variable-intercept panel model for deformation zoning of super-high arch dams. Based on different patterns of the special effect in the variable-intercept panel model, two panel analysis models were established to monitor fixed and random effects of dam deformation. Hausman test method of model selection and model effectiveness assessment method are discussed. Finally, the effectiveness of established models is verified through a case study.

Contemporary patterns of surgery and outcomes for aortic coarctation: An analysis of the Society of Thoracic Surgeons Congenital Heart Surgery Database

PubMed Central

Ungerleider, Ross M.; Pasquali, Sara K.; Welke, Karl F.; Wallace, Amelia S.; Ootaki, Yoshio; Quartermain, Michael D.; Williams, Derek A.; Jacobs, Jeffrey P.

2013-01-01

Objective The objective of this study was to describe characteristics and early outcomes across a large multicenter cohort undergoing coarctation or hypoplastic aortic arch repair. Methods Patients undergoing coarctation or hypoplastic aortic arch repair (2006–2010) as their first cardiovascular operation in the Society of Thoracic Surgeons Congenital Heart Surgery Database were included. Group 1 patients consisted of those with coarctation or hypoplastic aortic arch without ventricular septal defect (coarctation or hypoplastic aortic arch, isolated); group 2, coarctation or hypoplastic aortic arch with ventricular septal defect (coarctation or hypoplastic aortic arch, ventricular septal defect); and group 3, coarctation or hypoplastic aortic arch with other major cardiac diagnoses (coarctation or hypoplastic aortic arch, other). Results The cohort included 5025 patients (95 centers): group 1, 2705 (54%); group 2, 840 (17%); and group 3, 1480 (29%). Group 1 underwent coarctation or hypoplastic aortic arch repair at an older age than groups 2 and 3 (groups 1, 2, and 3, 75%, 99%, and 88% < 1 year old, respectively; P<.0001). The most common operative techniques for coarctation or hypoplastic aortic arch repair (group 1) were end-to-end (33%) or extended end-to-end (56%) anastomosis. Overall mortality was 2.4%, and was 1%, 2.5%, and 4.8% for groups 1, 2, and 3 respectively (P < .0001). Ventricular septal defect management strategies for group 2 patients included ventricular septal defect closure (n = 211, 25%), pulmonary artery band (n = 89, 11%), or no intervention (n = 540, 64%) without significant difference in mortality (4%, 1%, 2%; P = .15). Postoperative complications occurred in 36% of patients overall and were more common in groups 2 and 3. There were no occurrences of spinal cord injury (0/973). Conclusions In the current era, primary coarctation or hypoplastic aortic arch repair is performed predominantly in neonates and infants. Overall mortality is low, although those with concomitant defects are at risk for higher morbidity and mortality. The risk of spinal cord injury is lower than previously reported. PMID:23098750

Evaluation of the accuracy of 7 digital scanners: An in vitro analysis based on 3-dimensional comparisons.

PubMed

Renne, Walter; Ludlow, Mark; Fryml, John; Schurch, Zach; Mennito, Anthony; Kessler, Ray; Lauer, Abigail

2017-07-01

As digital impressions become more common and more digital impression systems are released onto the market, it is essential to systematically and objectively evaluate their accuracy. The purpose of this in vitro study was to evaluate and compare the trueness and precision of 6 intraoral scanners and 1 laboratory scanner in both sextant and complete-arch scenarios. Furthermore, time of scanning was evaluated and correlated with trueness and precision. A custom complete-arch model was fabricated with a refractive index similar to that of tooth structure. Seven digital impression systems were used to scan the custom model for both posterior sextant and complete arch scenarios. Analysis was performed using 3-dimensional metrology software to measure discrepancies between the master model and experimental casts. Of the intraoral scanners, the Planscan was found to have the best trueness and precision while the 3Shape Trios was found to have the poorest for sextant scanning (P<.001). The order of trueness for complete arch scanning was as follows: 3Shape D800 >iTero >3Shape TRIOS 3 >Carestream 3500 >Planscan >CEREC Omnicam >CEREC Bluecam. The order of precision for complete-arch scanning was as follows: CS3500 >iTero >3Shape D800 >3Shape TRIOS 3 >CEREC Omnicam >Planscan >CEREC Bluecam. For the secondary outcome evaluating the effect time has on trueness and precision, the complete- arch scan time was highly correlated with both trueness (r=0.771) and precision (r=0.771). For sextant scanning, the Planscan was found to be the most precise and true scanner. For complete-arch scanning, the 3Shape Trios was found to have the best balance of speed and accuracy. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Analysis of an arched outer-race ball bearing considering centrifugal forces.

NASA Technical Reports Server (NTRS)

Hamrock, B. J.; Anderson, W. J.

1972-01-01

Thrust-load analysis of a 150-mm angular contact ball bearing, taking into account centrifugal forces but omitting gyroscopics, elastohydrodynamics, and thermal effects. A Newton-Raphson method of iteration is used to evaluate the radial and axial projection of the distance between the ball center and the outer raceway groove curvature center. Fatigue life of the bearing is evaluated. Results for life, contact loads, and angles are given for a conventional bearing and two arched bearings.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoehler, M; McCallen, D; Noble, C

The analysis, and subsequent retrofit, of concrete arch bridges during recent years has relied heavily on the use of computational simulation. For seismic analysis in particular, computer simulation, typically utilizing linear approximations of structural behavior, has become standard practice. This report presents the results of a comprehensive study of the significance of model sophistication (i.e. linear vs. nonlinear) and pertinent modeling assumptions on the dynamic response of concrete arch bridges. The study uses the Bixby Creek Bridge, located in California, as a case study. In addition to presenting general recommendations for analysis of this class of structures, this report providesmore » an independent evaluation of the proposed seismic retrofit for the Bixby Creek Bridge. Results from the study clearly illustrate a reduction of displacement drifts and redistribution of member forces brought on by the inclusion of material nonlinearity. The analyses demonstrate that accurate modeling of expansion joints, for the Bixby Creek Bridge in particular, is critical to achieve representative modal and transient behavior. The inclusion of near-field displacement pulses in ground motion records was shown to significantly increase demand on the relatively softer, longer period Bixby Creek Bridge arch. Stiffer, shorter period arches, however, are more likely susceptible to variable support motions arising from the canyon topography typical for this class of bridges.« less

Simple removable appliances to correct anterior and posterior crossbite in mixed dentition: Case report

PubMed Central

Bindayel, Naif A.

2012-01-01

Different techniques have been used to correct anterior and posterior crossbites in mixed dentition. This case report illustrates the treatment of anterior and unilateral posterior crossbites during the mixed dentition. The patient was a 9-year-old boy with a crossbite of the maxillary right permanent central incisor and a unilateral right posterior crossbite, both expressed by a functional shift in the sagittal and transverse dimensions. Two upper acrylic removable appliances, each with an expansion jackscrew, were used to correct the crossbites. The total active treatment time was 4 months; the treatment outcomes were successfully maintained for the subsequent 4 months. General and pediatric dentists, as well as orthodontists, may find this technique useful in managing crossbite cases of the mixed dentition and utilizing the discussion and illustrations for further clinical guidance. PMID:23960537

Risk of developing palatally displaced canines in patients with early detectable dental anomalies: a retrospective cohort study.

PubMed

Garib, Daniela Gamba; Lancia, Melissa; Kato, Renata Mayumi; Oliveira, Thais Marchini; Neves, Lucimara Teixeira das

2016-01-01

To estimate the risk of PDC occurrence in children with dental anomalies identified early during mixed dentition. The sample comprised 730 longitudinal orthodontic records from children (448 females and 282 males) with an initial mean age of 8.3 years (SD=1.36). The dental anomaly group (DA) included 263 records of patients with at least one dental anomaly identified in the initial or middle mixed dentition. The non-dental anomaly group (NDA) was composed of 467 records of patients with no dental anomalies. The occurrence of PDC in both groups was diagnosed using panoramic and periapical radiographs taken in the late mixed dentition or early permanent dentition. The prevalence of PDC in patients with and without early diagnosed dental anomalies was compared using the chi-square test (p<0.01), relative risk assessments (RR), and positive and negative predictive values (PPV and NPV). PDC frequency was 16.35% and 6.2% in DA and NDA groups, respectively. A statistically significant difference was observed between groups (p<0.01), with greater risk of PDC development in the DA group (RR=2.63). The PPV and NPV was 16% and 93%, respectively. Small maxillary lateral incisors, deciduous molar infraocclusion, and mandibular second premolar distoangulation were associated with PDC. Children with dental anomalies diagnosed during early mixed dentition have an approximately two and a half fold increased risk of developing PDC during late mixed dentition compared with children without dental anomalies.

Tooth loss and its association with dietary intake and diet quality in American adults.

PubMed

Zhu, Yong; Hollis, James H

2014-11-01

To investigate associations between the number of natural teeth and energy intake, nutrient intake, and diet quality in adults. Eligible adults who participated in the National Health and Nutrition Examination Survey during 2005-2008 were included in the present study (n=9140). Participants were classified into three groups depending on the total number of natural teeth (excluding third molars): full dentition (28 teeth), moderate dentition (21-27 teeth), and poor dentition (20 teeth or less). Dietary intake and diet quality were estimated from the first 24-h dietary recall data. Participants in the poor dentition group had significantly lower energy intake than those with moderate dentition (P<0.05), however, both groups did not significantly differ from those who had full dentition. Adjusting for sociodemographic characteristics, physical activity, smoking status, and energy intake, the intake of protein as well as most vitamins and minerals were positively associated with the total number of natural teeth (P<0.05); an inverse association was observed for carbohydrate intake (P<0.001). Diet quality, as measured by the Healthy Eating Index 2005, was inversely associated with tooth loss (P<0.001). Tooth loss in adults is associated with lower diet quality and reduced intake of most nutrients; this may partly explain for the higher risk of chronic diseases in this population. People with missing teeth are recommended to monitor their dietary intake to avoid nutrient deficiency and to improve their diet quality for better health. Copyright © 2014 Elsevier Ltd. All rights reserved.

Association between Chewing Side Preference and Dental Caries among Deciduous, Mixed and Permanent Dentition

PubMed Central

Sharma, Reena; Kashyap, Nilotpol; Prajapati, Deepesh; Kappadi, Damodar; Wadhwa, Saakshe; Gandotra, Shina; Yadav, Poonam

2016-01-01

Introduction Chewing Side Preference (CSP) is said to occur when mastication is recognized exclusively/consistently or predominantly on the same side of the jaw. It can be assessed by using the direct method - visual observation and indirect methods by electric programs, such as cinematography, kinetography and computerized electromyography. Aim The present study was aimed at evaluating the prevalence of CSP in deciduous, mixed and permanent dentitions and relating its association with dental caries. Materials and Methods In a cross-sectional observational study, 240 school going children aged 3 to 18years were randomly allocated to three experimental groups according to the deciduous dentition, mixed dentition and permanent dentition period. The existence of a CSP was determined using a direct method by asking the children to chew on a piece of gum (trident sugarless). The Mann Whitney U-test was used to compare the CSP and also among the boys and girls. The Spearman’s Correlation Coefficient was used to correlate CSP and dental caries among the three study groups and also among the groups. Results CSP was observed in 69%, 83% and 76% of children with primary, mixed and permanent dentition respectively (p>0.05). There was no statistically significant association between the presence of CSP and dental caries among the three study groups. Conclusion There was a weak or no correlation between gender and distribution of CSP and between presence of CSP and dental caries. PMID:27790569

Double aortic arch

MedlinePlus

Aortic arch anomaly; Double arch; Congenital heart defect - double aortic arch; Birth defect heart - double aortic arch ... aorta is a single arch that leaves the heart and moves leftward. In double aortic arch, some ...

Maxillary tridimensional changes after slow expansion with leaf expander in a sample of growing patients: a pilot study.

PubMed

Lanteri, V; Gianolio, A; Gualandi, G; Beretta, M

2018-03-01

The aim of this study is to evaluate the dento-alveolar effects of slow maxillary expansion using the Leaf Expander in a sample of growing patients with maxillary transverse deficiency, unilateral cross bite and mandibular shift. The study included 10 patients, 3 male and 7 female (mean age 7.5 + 7 months), treated with Leaf Expander anchored on the upper deciduous teeth. Digital models were obtained by a lab scan of the pvs impressions at the beginning of the therapy (T1) and at the removal of the palatal expander (T2). Five parameters were measured: 1) the distance between the first upper permanent molars; 2) the distance between the upper second deciduous molars; 3) the distance between the upper canine cusps 4) the distance between the first lower permanent molars; 5) the distance of the lower canine cusps. In all patients complete correction of posterior crossbite was achieved on average in 4 months, with a spontaneous expansion of the upper first permanent molars. Significant increases in the dento-alveolar transversal diameters were obtained. Increases were also observed in the anterior mandibular arch diameter (+ 1 mm). These findings suggest that slow maxillary expansion using Leaf Expander appliance could be a reasonable alternative to conventional maxillary expansion therapy in the early mixed dentition.

An Analysis of the Strategic Planning Efforts of (Arch)Dioceses with Similar Demographic Conditions

ERIC Educational Resources Information Center

Semmler, Carl A.

2016-01-01

The population of the Catholic elementary schools has been on the downward trend for over half a century. Various Catholic (arch)dioceses have responded by creating strategic plans for their elementary and secondary institutions of education. Shifts in demographics and population migration have been noted in both secular and non-secular data.…

A numerical procedure for failure mode detection of masonry arches reinforced with fiber reinforced polymeric materials

NASA Astrophysics Data System (ADS)

Galassi, S.

2018-05-01

In this paper a mechanical model of masonry arches strengthened with fibre-reinforced composite materials and the relevant numerical procedure for the analysis are proposed. The arch is modelled by using an assemblage of rigid blocks that are connected together and, also to the supporting structures, by mortar joints. The presence of the reinforcement, usually a sheet placed at the intrados or the extrados, prevents the occurrence of cracks that could activate possible collapse mechanisms, due to tensile failure of the mortar joints. Therefore, in a reinforced arch failure generally occurs in a different way from the URM arch. The numerical procedure proposed checks, as a function of an external incremental load, the inner stress state in the arch, in the reinforcement and in the adhesive layer. In so doing, it then provides a prediction of failure modes. Results obtained from experimental tests, carried out on four in-scale models performed in a laboratory, have been compared with those provided by the numerical procedure, implemented in ArchiVAULT, a software developed by the author. In this regard, the numerical procedure is an extension of previous works. Although additional experimental investigations are necessary, these former results confirm that the proposed numerical procedure is promising.

Shape change in the atlas with congenital midline non-union of its posterior arch: a morphometric geometric study.

PubMed

Ríos, Luis; Palancar, Carlos; Pastor, Francisco; Llidó, Susana; Sanchís-Gimeno, Juan Alberto; Bastir, Markus

2017-10-01

The congenital midline non-union of the posterior arch of the atlas is a developmental variant present at a frequency ranging from 0.7% to 3.9%. Most of the reported cases correspond to incidental findings during routine medical examination. In cases of posterior non-union, hypertrophy of the anterior arch and cortical bone thickening of the posterior arches have been observed and interpreted as adaptive responses of the atlas to increased mechanical stress. We sought to determine if the congenital non-union of the posterior arch results in a change in the shape of the atlas. This study is an analysis of the first cervical vertebrae from osteological collections through morphometric geometric techniques. A total of 21 vertebrae were scanned with a high-resolution three-dimensional scanner (Artec Space Spider, Artec Group, Luxembourg). To capture vertebral shape, 19 landmarks and 100 semilandmarks were placed on the vertebrae. Procrustes superimposition was applied to obtain size and shape data (MorphoJ 1.02; Klingenberg, 2011), which were analyzed through principal component analysis (PCA) and mean shape comparisons. The PCA resulted in two components explaining 22.32% and 18.8% of the total shape variance. The graphic plotting of both components indicates a clear shape difference between the control atlas and the atlas with posterior non-union. This observation was supported by statistically significant differences in mean shape comparisons between both types of vertebra (p<.0001). Changes in shape were observed in the superior and inferior articular facets, the transverse processes, and the neural canal between the control and non-union vertebrae. Non-union of the posterior arch of the atlas is associated with significant changes in the shape of the vertebra. Copyright © 2017 Elsevier Inc. All rights reserved.

Causes and treatment of mandibular and condylar fractures in children and adolescents: a review of 104 cases.

PubMed

Shi, Jun; Chen, Zhibiao; Xu, Bing

2014-03-01

There are no uniform treatments, standards, and specifications for conservative and surgical management of mandibular fractures in children and adolescents. To review the management of mandibular fractures in children and adolescents at our institution. The medical records of 104 children and adolescents (60 male and 44 female) treated for mandibular fractures from 2005 to 2012 at the Ninth People's Hospital, Shanghai, China, were retrospectively reviewed. The participants were classified as having deciduous dentition (age ≤6 years), mixed dentition (age >6 but <12 years), and permanent dentition (age ≥12 but ≤16 years). Conservative treatment and surgical management. Helkimo clinical dysfunction and anamnestic indices. Condylar process fractures accounted for 55.7% of the fractures (112 fractures of 201 total fracture sites), and symphysis fractures, parasymphysis fractures, fractures of the body, and fractures of the angle accounted for 20.9%, 11.9%, 7.0%, and 3.5% of the fractures, respectively. A total of 83 cases with 159 fracture sites with complete follow-up data were included in the treatment analysis. In these 83 patients, 77 fractures were dentigerous bone fractures, 46 were intracapsular fractures, and 36 were extracapsular fractures. Dentigerous bone fractures of the mandible were managed by closed or open reduction in children younger than 12 years and were managed more often by open reduction and fixation in those between ages 12 and 16 years. Closed treatment was performed for 22 condylar process fractures (28.6%), and open reduction was carried out for 55 condylar process fractures (71.4%). In patients with intracapsular fractures, there was no significant relationship between dentation age and treatment method (P = .06). Most patients with extracapsular fractures with permanent dentition underwent surgical fixation (73.3%), whereas most with deciduous dentition received conservative treatment (87.5%). In patients with condylar process fractures, there was no significant difference in Ai and Di based on treatment method (P = .49 and P = .76, respectively). The treatment of mandibular fractures in children and adolescents should be determined by clinical factors including age, location, and type of fracture.

Demographic, socioeconomic, and behavioral factors affecting patterns of tooth decay in the permanent dentition: Principal components and factor analyses

PubMed Central

Shaffer, John R.; Polk, Deborah E.; Feingold, Eleanor; Wang, Xiaojing; Cuenco, Karen T.; Weeks, Daniel E.; DeSensi, Rebecca S.; Weyant, Robert J.; Crout, Richard; McNeil, Daniel W.; Marazita, Mary L.

2012-01-01

Objectives Dental caries of the permanent dentition is a multi-factorial disease resulting from the complex interplay of endogenous and environmental risk factors. The disease is not easily quantified due to the innumerable possible combinations of carious lesions across individual tooth surfaces of the permanent dentition. Global measures of decay, such as the DMFS index (which was developed for surveillance applications), may not be optimal for studying the epidemiology of dental caries because they ignore the distinct patterns of decay across the dentition. We hypothesize that specific risk factors may manifest their effects on specific tooth surfaces leading to patterns of decay that can be identified and studied. In this study we utilized two statistical methods of extracting patterns of decay from surface-level caries data in order to create novel phenotypes with which to study the risk factors affecting dental caries. Methods Intra-oral dental examinations were performed on 1,068 participants aged 18 to 75 years to assess dental caries. The 128 tooth surfaces of the permanent dentition were scored as carious or not and used as input for principal components analysis (PCA) and factor analysis (FA), two methods of identifying underlying patterns without a priori knowledge of the patterns. Demographic (age, sex, birth year, race/ethnicity, and educational attainment), anthropometric (height, body mass index, waist circumference), endogenous (saliva flow), and environmental (tooth brushing frequency, home water source, and home water fluoride) risk factors were tested for association with the caries patterns identified by PCA and FA, as well as DMFS, for comparison. The ten strongest patterns (i.e., those that explain the most variation in the data set) extracted by PCA and FA were considered. Results The three strongest patterns identified by PCA reflected (i) global extent of decay (i.e., comparable to DMFS index), (ii) pit and fissure surface caries, and (iii) smooth surface caries, respectively. The two strongest patterns identified by FA corresponded to (i) pit and fissure surface caries and (ii) maxillary incisor caries. Age and birth year were significantly associated with several patterns of decay, including global decay/DMFS index. Sex, race, educational attainment, and tooth brushing were each associated with specific patterns of decay, but not with global decay/DMFS index. Conclusions Taken together, these results support the notion that caries experience is separable into patterns attributable to distinct risk factors. This study demonstrates the utility of such novel caries patterns as new outcomes for exploring the complex, multifactorial nature of dental caries. PMID:23106439

Demographic, socioeconomic, and behavioral factors affecting patterns of tooth decay in the permanent dentition: principal components and factor analyses.

PubMed

Shaffer, John R; Polk, Deborah E; Feingold, Eleanor; Wang, Xiaojing; Cuenco, Karen T; Weeks, Daniel E; DeSensi, Rebecca S; Weyant, Robert J; Crout, Richard; McNeil, Daniel W; Marazita, Mary L

2013-08-01

Dental caries of the permanent dentition is a multifactorial disease resulting from the complex interplay of endogenous and environmental risk factors. The disease is not easily quantitated due to the innumerable possible combinations of carious lesions across individual tooth surfaces of the permanent dentition. Global measures of decay, such as the DMFS index (which was developed for surveillance applications), may not be optimal for studying the epidemiology of dental caries because they ignore the distinct patterns of decay across the dentition. We hypothesize that specific risk factors may manifest their effects on specific tooth surfaces leading to patterns of decay that can be identified and studied. In this study, we utilized two statistical methods of extracting patterns of decay from surface-level caries data to create novel phenotypes with which to study the risk factors affecting dental caries. Intra-oral dental examinations were performed on 1068 participants aged 18-75 years to assess dental caries. The 128 tooth surfaces of the permanent dentition were scored as carious or not and used as input for principal components analysis (PCA) and factor analysis (FA), two methods of identifying underlying patterns without a priori knowledge of the patterns. Demographic (age, sex, birth year, race/ethnicity, and educational attainment), anthropometric (height, body mass index, waist circumference), endogenous (saliva flow), and environmental (tooth brushing frequency, home water source, and home water fluoride) risk factors were tested for association with the caries patterns identified by PCA and FA, as well as DMFS, for comparison. The ten strongest patterns (i.e. those that explain the most variation in the data set) extracted by PCA and FA were considered. The three strongest patterns identified by PCA reflected (i) global extent of decay (i.e. comparable to DMFS index), (ii) pit and fissure surface caries and (iii) smooth surface caries, respectively. The two strongest patterns identified by FA corresponded to (i) pit and fissure surface caries and (ii) maxillary incisor caries. Age and birth year were significantly associated with several patterns of decay, including global decay/DMFS index. Sex, race, educational attainment, and tooth brushing were each associated with specific patterns of decay, but not with global decay/DMFS index. Taken together, these results support the notion that caries experience is separable into patterns attributable to distinct risk factors. This study demonstrates the utility of such novel caries patterns as new outcomes for exploring the complex, multifactorial nature of dental caries. © 2012 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Precise chronology of differentiation of developing human primary dentition.

PubMed

Hu, Xuefeng; Xu, Shan; Lin, Chensheng; Zhang, Lishan; Chen, YiPing; Zhang, Yanding

2014-02-01

While correlation of developmental stage with embryonic age of the human primary dentition has been well documented, the available information regarding the differentiation timing of the primary teeth was largely based on the observation of initial mineralization and varies significantly. In this study, we aimed to document precise differentiation timing of the developing human primary dentition. We systematically examined the expression of odontogenic differentiation markers along with the formation of mineralized tissue in each developing maxillary and mandibular teeth from human embryos with well-defined embryonic age. We show that, despite that all primary teeth initiate development at the same time, odontogenic differentiation begins in the maxillary incisors at the 15th week and in the mandibular incisors at the 16th week of gestation, followed by the canine, the first primary premolar, and the second primary premolar at a week interval sequentially. Despite that the mandibular primary incisors erupt earlier than the maxillary incisors, this distal to proximal sequential differentiation of the human primary dentition coincides in general with the sequence of tooth eruption. Our results provide an accurate chronology of odontogenic differentiation of the developing human primary dentition, which could be used as reference for future studies of human tooth development.

A contrast and registration template for magnetic resonance image data guided dental implant placement

NASA Astrophysics Data System (ADS)

Eggers, Georg; Cosgarea, Raluca; Rieker, Marcus; Kress, Bodo; Dickhaus, Hartmut; Mühling, Joachim

2009-02-01

An oral imaging template was developed to address the shortcomings of MR image data for image guided dental implant planning and placement. The template was conctructed as a gadolinium filled plastic shell to give contrast to the dentition and also to be accurately re-attachable for use in image guided dental implant placement. The result of segmentation and modelling of the dentition from MR Image data with the template was compared to plaster casts of the dentition. In a phantom study dental implant placement was performed based on MR image data. MR imaging with the contrast template allowed complete representation of the existing dentition. In the phantom study, a commercially available system for image guided dental implant placement was used. Transformation of the imaging contrast template into a surgical drill guide based on the MR image data resulted in pilot burr hole placement with an accuracy of 2 mm. MRI based imaging of the existing dentition for proper image guided planning is possible with the proposed template. Using the image data and the template resulted in less accurate pilot burr hole placement in comparison to CT-based image guided implant placement.

Malocclusions in a juvenile medieval skull material.

PubMed

Larsson, E

1983-01-01

From a mostly medieval skull material--the "Schreiner collections" in Oslo--juvenile crania were selected as follows: Group A: Crania with complete and intact primary dentition. n = 20. Group B: Crania with early mixed dentition. Incisors only erupted or under eruption. n = 47. Group C: Crania with late mixed dentition. n = 14. The author recorded visually: Sagittal and transversal dental relation, frontal dental contact, anterior cross-bite, rotation and crowding. There was good basal stability. Sagittally 1 moderately postnormal dentition was recorded, transversally there were no anomalies. Slight anterior cross-bite was recorded in 1 case, anterior cross-bite of one and two lateral incisors respectively in 2 others, and tête-à-tête contact in 3 cases. Crowding was recorded in 6 cases, in one of them being general, in the others located solely in the mandibular incisor segment. Broken contact and more or less pronounced rotation occurred in these dentitions. Rotation was also recorded in 2 other cases. The prevalence of malocclusions of the type that can be related to continuing finger-sucking or sucking of dummylike objects was very low in this material. This observation prompted the author to discuss a hypothesis concerning the aetiology of dummy- and finger-sucking habits.

A comparison of foot kinematics in people with normal- and flat-arched feet using the Oxford Foot Model.

PubMed

Levinger, Pazit; Murley, George S; Barton, Christian J; Cotchett, Matthew P; McSweeney, Simone R; Menz, Hylton B

2010-10-01

Foot posture is thought to influence predisposition to overuse injuries of the lower limb. Although the mechanisms underlying this proposed relationship are unclear, it is thought that altered foot kinematics may play a role. Therefore, this study was designed to investigate differences in foot motion between people with normal- and flat-arched feet using the Oxford Foot Model (OFM). Foot posture in 19 participants was documented as normal-arched (n=10) or flat-arched (n=9) using a foot screening protocol incorporating measurements from weightbearing antero-posterior and lateral foot radiographs. Differences between the groups in triplanar motion of the tibia, rearfoot and forefoot during walking were evaluated using a three-dimensional motion analysis system incorporating a multi-segment foot model (OFM). Participants with flat-arched feet demonstrated greater peak forefoot plantar-flexion (-13.7° ± 5.6° vs -6.5° ± 3.7°; p=0.004), forefoot abduction (-12.9° ± 6.9° vs -1.8° ± 6.3°; p=0.002), and rearfoot internal rotation (10.6° ± 7.5° vs -0.2°± 9.9°; p=0.018) compared to those with normal-arched feet. Additionally, participants with flat-arched feet demonstrated decreased peak forefoot adduction (-7.0° ± 9.2° vs 5.6° ± 7.3°; p=0.004) and a trend towards increased rearfoot eversion (-5.8° ± 4.4° vs -2.5° ± 2.6°; p=0.06). These findings support the notion that flat-arched feet have altered motion associated with greater pronation during gait; factors that may increase the risk of overuse injury. Copyright © 2010 Elsevier B.V. All rights reserved.

Aortic Arch Morphology and Aortic Length in Patients with Dissection, Traumatic, and Aneurysmal Disease.

PubMed

Alberta, H B; Takayama, T; Smits, T C; Wendorff, B B; Cambria, R P; Farber, M A; Jordan, W D; Patel, V; Azizzadeh, A; Rovin, J D; Matsumura, J S

2015-12-01

To assess aortic arch morphology and aortic length in patients with dissection, traumatic injury, and aneurysm undergoing TEVAR, and to identify characteristics specific to different pathologies. This was a retrospective analysis of the aortic arch morphology and aortic length of dissection, traumatic injury, and aneurysmal patients. Computed tomography imaging was evaluated of 210 patients (49 dissection, 99 traumatic injury, 62 aneurysm) enrolled in three trials that received the conformable GORE TAG thoracic endoprosthesis. The mean age of trauma patients was 43 ± 19.6 years, 57 ± 11.7 years for dissection and 72 ± 9.6 years for aneurysm patients. A standardized protocol was used to measure aortic arch diameter, length, and take-off angle and clockface orientation of branch vessels. Differences in arch anatomy and length were assessed using ANOVA and independent t tests. Of the 210 arches evaluated, 22% had arch vessel common trunk configurations. The aortic diameter and the distance from the left main coronary (LMC) to the left common carotid (LCC) were greater in dissection patients than in trauma or aneurysm patients (p < .001). Aortic diameter in aneurysm patients was greater compared with trauma patients (p < .05). The distances from the branch vessels to the celiac artery (CA) were greater in dissection and aneurysm patients than in trauma patients (p < .001). The take-off angle of the innominate (I), LCCA, and left subclavian (LS) were greater, between 19% and 36%, in trauma patients than in dissection and aneurysm patients (p < .001). Clockface orientation of the arch vessels varies between pathologies. Arch anatomy has significant morphologic differences when comparing aortic pathologies. Describing these differences in a large sample of patients is beneficial for device designs and patient selection. Copyright © 2015 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Aortic arch shape is not associated with hypertensive response to exercise in patients with repaired congenital heart diseases.

PubMed

Ntsinjana, Hopewell N; Biglino, Giovanni; Capelli, Claudio; Tann, Oliver; Giardini, Alessandro; Derrick, Graham; Schievano, Silvia; Taylor, Andrew M

2013-11-12

Aortic arch geometry is linked to abnormal blood pressure (BP) response to maximum exercise. This study aims to quantitatively assess whether aortic arch geometry plays a role in blood pressure (BP) response to exercise. 60 age- and BSA-matched subjects--20 post-aortic coarctation (CoA) repair, 20 transposition of great arteries post arterial switch operation (ASO) and 20 healthy controls--had a three-dimensional (3D), whole heart magnetic resonance angiography (MRA) at 1.5 Tesla, 3D geometric reconstructions created from the MRA. All subjects underwent cardiopulmonary exercise test on the same day as MRA using an ergometer cycle with manual BP measurements. Geometric analysis and their correlation with BP at peak exercise were assessed. Arch curvature was similarly acute in both the post-CoA and ASO cases [0.05 ± 0.01 vs. 0.05 ± 0.01 (1/mm/m²); p = 1.0] and significantly different to that of normal healthy controls [0.05 ± 0.01 vs. 0.03 ± 0.01 (1/mm/m²), p < 0.001]. Indexed transverse arch cross sectional area were significantly abnormal in the post-CoA cases compared to the ASO cases (117.8 ± 47.7 vs. 221.3 ± 44.6; p < 0.001) and controls (117.8 ± 47.7 vs. 157.5 ± 27.2 mm²; p = 0.003). BP response to peak exercise did not correlate with arch curvature (r = 0.203, p = 0.120), but showed inverse correlation with indexed minimum cross sectional area of transverse arch and isthmus (r = -0.364, p = 0.004), and ratios of minimum arch area/ descending diameter (r = -0.491, p < 0.001). Transverse arch and isthmus hypoplasia, rather than acute arch angulation plays a role in the pathophysiology of BP response to peak exercise following CoA repair.

Fragile X syndrome: panoramic radiographic evaluation of dental anomalies, dental mineralization stage, and mandibular angle

PubMed Central

Sabbagh-Haddad, Aida; Haddad, Denise Sabbagh; Michel-Crosato, Edgard; Arita, Emiko Saito

2016-01-01

ABSTRACT Fragile X syndrome (FXS) is a disorder linked to the chromosome X long arm (Xq27.3), which is identified by a constriction named fragile site. It determines various changes, such as behavioral or emotional problems, learning difficulties, and intellectual disabilities. Craniofacial abnormalities such as elongated and narrow face, prominent forehead, broad nose, large and prominent ear pavilions, strabismus, and myopia are frequent characteristics. Regarding the oral aspects, deep and high-arched palate, mandibular prognathism, and malocclusion are also observed. Objective: The purpose of this study was to evaluate the dental radiographic characteristics as described in 40 records of patients with panoramic radiography. Material and Methods: The patients were in the range of 6–17 years old, and were divided into two groups (20 subjects who were compatible with the normality standard and 20 individuals diagnosed with the FXS), which were matched for gender and age. Analysis of the panoramic radiographic examination involved the evaluation of dental mineralization stage, mandibular angle size, and presence of dental anomalies in both deciduous and permanent dentitions. Results: The results of radiographic evaluation demonstrated that the chronology of tooth eruption of all third and second lower molars is anticipated in individuals with FXS (p<0.05). In this group, supernumerary deciduous teeth (2.83%), giroversion of permanent teeth (2.31%), and partial anodontia (1.82%) were the most frequent dental anomalies. In addition, an increase was observed in the mandibular angle size in the FXS group (p<0.05). Conclusion: We conclude that knowledge of dental radiographic changes is of great importance for dental surgeons to plan the treatment of these individuals. PMID:27812623

Dentoskeletal Effects of the Modified Tandem Appliance vs the Facemask Appliance in the Treatment of Skeletal Class III Malocclusion: A Single-center, Randomized Controlled Trial.

PubMed

Husson, Amro H; Burhan, Ahmad S; Salma, Fadwa B; Nawaya, Fehmieh R

2016-07-01

The aim of this randomized controlled trial was to compare the skeletal and dentoalveolar effects of the modified tandem appliance (MTA) vs the facemask (FM) with rapid maxillary expansion. Thirty-two patients, aged 7 to 9 years were recruited. Eligibility criteria included skeletal class III malocclusion that resulted from the retrusion of the maxilla. Randomization was accomplished to divide the sample into two equal groups to be treated with either MTA or FM. Lateral cephalometric radiographs were obtained before treatment and after 2 mm positive overjet was achieved. Intragroup comparisons were performed using paired-sample t-test, and intergroup comparisons were performed using two-sample t-test at the p ≤ 0.05 level. Thirty-two patients (16 in each group) were available for statistical analysis. The pretreatment variables of both groups were similar. Both treatment therapies showed similar significant increase in the SNA and ANB angles, accompanied by slight decrease in the SNB angle. The increase in the SN:GoMe angle, Bjork's sum, and the overjet were significantly greater in the FM group. The forward movement of upper dentition was similar in both groups. Although the lower incisors retrusion was significantly greater in the FM group than in the MTA group, the uprighting of the lower molars was significantly greater in the MTA group. Both appliances showed similar effects apart from less clockwise rotation of the mandible, less retrusion of the lower incisors, and greater uprighting of the lower molars in the MTA group. Both the MTA and the FM groups are effective in treating class III malocclusion. The MTA group is more efficient in controlling the clockwise rotation and gaining some space in the lower arch.

Prevalence of dental anomalies in the permanent dentition of children with Down syndrome.

PubMed

Sekerci, Ahmet Ercan; Cantekin, Kenan; Aydinbelge, Mustafa; Ucar, Faruk İzzet

2014-01-01

The purpose of this study was to evaluate the prevalence of various congenital dental anomalies in the permanent dentition of Turkish children with Down syndrome. The sample consisted of 216 diagnostic records of children diagnosed with Down syndrome. All subjects had a clinical examination as well as radiographs and photographs taken. Anomalies in the permanent dentition were documented. There was a high incidence of dental anomalies, the most frequent being taurodontism (81 percent), rotation (28 percent), hypodontia (26 percent), tooth impaction (18 percent), ectopic eruption (14 percent), microdontia (13 percent), and hyperdontia (9 percent). Differences in prevalence of congenitally missing teeth, structural anomalies, and positional anomalies reached a statistically significant level regarding gender (P<.05). Turkish children with Down syndrome presented a high incidence of anomalies affecting the permanent dentition, and, in most cases, individuals presented with more than one anomaly.

Image-Based 3d Reconstruction and Analysis for Orthodontia

NASA Astrophysics Data System (ADS)

Knyaz, V. A.

2012-08-01

Among the main tasks of orthodontia are analysis of teeth arches and treatment planning for providing correct position for every tooth. The treatment plan is based on measurement of teeth parameters and designing perfect teeth arch curve which teeth are to create after treatment. The most common technique for teeth moving uses standard brackets which put on teeth and a wire of given shape which is clamped by these brackets for producing necessary forces to every tooth for moving it in given direction. The disadvantages of standard bracket technique are low accuracy of tooth dimensions measurements and problems with applying standard approach for wide variety of complex orthodontic cases. The image-based technique for orthodontic planning, treatment and documenting aimed at overcoming these disadvantages is proposed. The proposed approach provides performing accurate measurements of teeth parameters needed for adequate planning, designing correct teeth position and monitoring treatment process. The developed technique applies photogrammetric means for teeth arch 3D model generation, brackets position determination and teeth shifting analysis.

Analysis of maxillary arch force/couple systems for a simulated high canine malocclusion: Part 2. Elastic ligation.

PubMed

Fok, Jonathan; Toogood, Roger W; Badawi, Hisham; Carey, Jason P; Major, Paul W

2011-11-01

To better understand the mechanics of bracket/archwire interaction through analysis of force and couple distribution along the maxillary arch using elastic ligation and to compare these results with passive ligation. An orthodontic simulator was used to study a high canine malocclusion. Force and couple distributions produced by elastic ligation and round wire were measured. Forces and couples were referenced to the center of resistance of each tooth. Tests were repeated for 12 bracket sets with 12 wires per set. Data were compared with those derived from similar tests for passive ligation. Propagation of the force/couple systems around the arch using elastic ligation was extensive. Elastic ligation produced significantly more resistance to sliding, contributing to higher forces and couples at the center of resistance than were observed for passive ligation. The results of this study suggest some potential mechanical advantages of passive over elastic ligation. In particular, limited propagation around the arch in passive ligation reduces the occurrence of unwanted force/couple systems compared with elastic ligation. These advantages may not transfer to a clinical setting because of the conditions of the tests; additional testing would be required to determine whether these advantages can be generalized.

Three-dimensional computer-assisted study model analysis of long-term oral-appliance wear. Part 2. Side effects of oral appliances in obstructive sleep apnea patients.

PubMed

Chen, Hui; Lowe, Alan A; de Almeida, Fernanda Riberiro; Fleetham, John A; Wang, Bangkang

2008-09-01

Oral appliances (OAs) are widely prescribed for the treatment of obstructive sleep apnea (OSA). The occlusal changes that occur after long term OA treatment have not been well described based on detailed computerized three-dimensional (3D) assessment. Seventy patients with OSA (mean age, 50.0 years) who had been treated with an OA were identified for this study. A MicroScribe-3DX dental study model analysis system was used to make 3D measurements on baseline and follow-up (88.4 +/- 26.7 months) study models. The following dental measurements showed significant changes (P <0.05) with long-term use of an OA: mandibular arch width increased more than maxillary arch width, crowding decreased in both arches, the curve of Spee became flat in the premolar area, the mandibular canine to second molar segment moved forward in relation to the maxillary arch, the bite opened and the overjet decreased except in some molar areas. A variety of occlusal changes occur with long-term OA treatment for OSA. The changes could be regarded as either adverse or beneficial depending upon the baseline characteristics.

Validation of Association between Breastfeeding Duration, Facial Profile, Occlusion, and Spacing: A Cross-sectional Study

PubMed Central

Sharma, Mohit; Nehra, Karan; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar

2016-01-01

ABSTRACT Introduction: This cross-sectional retrospective study was designed to assess the relationships among breastfeeding duration, nonnutritive sucking habits, convex facial profile, nonspaced dentition, and distoclusion in the deciduous dentition. Materials and methods: A sample of 415 children (228 males, 187 females) aged 4 to 6 years from a mixed Indian population was clinically examined by two orthodontists. Information about breastfeeding duration and nonnutritive sucking habits was obtained by written questionnaire which was answered by the parents. Results: Chi-square test did not indicate any significant association among breastfeeding duration, convex facial profile, and distoclusion. Statistically significant association was observed between breastfeeding duration and nonspaced dentition and also between breastfeeding duration and nonnutritive sucking habits. Nonnutritive sucking habits had a statistically significant association with distoclusion and convex facial profile (odds ratio 7.04 and 4.03 respectively). Nonnutritive sucking habits did not have a statistically significant association with nonspaced dentition. Conclusion: The children breastfed < 6 months had almost twofold increased probability for developing sucking habits and nonspaced dentition, respectively, than the children who had breastfeeding > 6 months duration. It can also be hypothesized that nonnutritive sucking habits may act as a dominant variable in the relationship between breastfeeding duration and occurrence of convex facial profile and distoclusion in deciduous dentition. How to cite this article: Agarwal SS, Sharma M, Nehra K, Jayan B, Poonia A, Bhattal H. Validation of Association between Breastfeeding Duration, Facial Profile, Occlusion, and Spacing: A Cross-sectional Study. Int J Clin Pediatr Dent 2016;9(2):162-166. PMID:27365941

Dentition, nutritional status and adequacy of dietary intake among older residents in assisted living facilities.

PubMed

Saarela, Riitta K T; Lindroos, Eeva; Soini, Helena; Hiltunen, Kaija; Muurinen, Seija; Suominen, Merja H; Pitkälä, Kaisu H

2016-06-01

We examined the relationships between dentition, nutritional status and dietary intakes of energy, protein and micronutrients among older people in assisted living facilities in Helsinki. Poor dentition is associated with malnutrition. Less is known about how dentition is associated with detailed nutrient intakes in institutionalised older people. This cross-sectional study assessed 343 participants (mean age 83 years). Dentition was assessed by trained ward nurses and divided into edentulous participants without dentures (group 1), edentulous participants with removable dentures (group 2) and those with any natural teeth (group 3). Nutritional status was assessed by Mini Nutritional Assessment (MNA). The energy, protein and nutrient intakes were calculated from detailed 1-day food diaries and compared with the recommendations of the Finnish National Nutrition Council as a measure of dietary adequacy. Assessment included also participants' cognitive and functional status. Of the participants, 8.2, 39.1 and 52.8% were in groups 1, 2 and 3, respectively. Altogether 22% were malnourished according to MNA. Group 1 had the poorest nutritional status. A large proportion of participants consumed less than the recommended amounts of energy, protein or micronutrients. Half of the participants consumed <60 g/day of protein. The intake of protein was significantly lower in group 1 than in other two groups. Malnutrition and inadequate protein intake were very common and associated with dentition among older people with multiple disabilities in assisted living facilities. Assessment of dental status should be part of good nutritional care in long-term care. © 2014 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

Genetic Susceptibility to Dental Caries on Pit and Fissure and Smooth Surfaces

PubMed Central

Shaffer, J.R.; Wang, X.; DeSensi, R.S.; Wendell, S.; Weyant, R.J.; Cuenco, K.T.; Crout, R.; McNeil, D.W.; Marazita, M.L.

2012-01-01

Carious lesions are distributed nonuniformly across tooth surfaces of the complete dentition, suggesting that the effects of risk factors may be surface-specific. Whether genes differentially affect caries risk across tooth surfaces is unknown. We investigated the role of genetics on two classes of tooth surfaces, pit and fissure surfaces (PFS) and smooth surfaces (SMS), in more than 2,600 subjects from 740 families. Participants were examined for surface-level evidence of dental caries, and caries scores for permanent and/or primary teeth were generated separately for PFS and SMS. Heritability estimates (h2, i.e. the proportion of trait variation due to genes) of PFS and SMS caries scores were obtained using likelihood methods. The genetic correlations between PFS and SMS caries scores were calculated to assess the degree to which traits covary due to common genetic effects. Overall, the heritability of caries scores was similar for PFS (h2 = 19–53%; p < 0.001) and SMS (h2 = 17–42%; p < 0.001). Heritability of caries scores for both PFS and SMS in the primary dentition was greater than in the permanent dentition and total dentition. With one exception, the genetic correlation between PFS and SMS caries scores was not significantly different from 100%, indicating that (mostly) common genes are involved in the risk of caries for both surface types. Genetic correlation for the primary dentition dfs (decay + filled surfaces) was significantly less than 100% (p < 0.001), indicating that genetic factors may exert differential effects on caries risk in PFS versus SMS in the primary dentition. PMID:22286298

Radiographic evaluation of third molar development in 6- to 24-year-olds

PubMed Central

Jung, Yun-Hoa

2014-01-01

Purpose This study investigated the developmental stages of third molars in relation to chronological age and compared third molar development according to location and gender. Materials and Methods A retrospective analysis of panoramic radiographs of 2490 patients aged between 6 and 24 years was conducted, and the developmental stages of the third molars were evaluated using the modified Demirjian's classification. The mean age, standard deviation, minimal and maximal age, and percentile distributions were recorded for each stage of development. A Mann-Whitney U test was performed to test the developmental differences in the third molars between the maxillary and mandibular arches and between genders. A linear regression analysis was used for assessing the correlation between the third molar development and chronological age. Results The developmental stages of the third molars were more advanced in the maxillary arch than the mandibular arch. Males reached the developmental stages earlier than females. The average age of the initial mineralization of the third molars was 8.57 years, and the average age at apex closure was 21.96 years. The mean age of crown completion was 14.52 and 15.04 years for the maxillary and the mandibular third molars, respectively. Conclusion The developmental stages of the third molars clearly showed a strong correlation with age. The third molars developed earlier in the upper arch than the lower arch; further, they developed earlier in males than in females. PMID:25279338

The "beauty arch: " a new aesthetic analysis for malar augmentation planning.

PubMed

Marianetti, Tito Matteo; Cozzolino, Salvatore; Torroni, Andrea; Gasparini, Giulio; Pelo, Sandro

2015-05-01

Midface is a critical area for the aesthetics of the face. Despite malar hypoplasia is often combined with a class III malocclusion, there are few studies focusing on the results of a combined approach of malar implants and Le Fort I. We describe a new aesthetic analysis, named "beauty arch" analysis, for the assessment of sagittal projection of the malar region. We took a reference group of 74 Italian women participating in a national beauty contest in 2011 on which we performed our analysis. We used the ideal values to elaborate the surgical treatment planning of a second group of 45 consecutive female patients affected by skeletal class III malocclusion.Twenty-three patients undergo simultaneous Le Fort I osteotomy and malar implants. From the descriptive statistical comparison of the patients' values before and after orthognathic surgery and malar implants with the reference values, we observed how all parameters considered got closer to the ideal population. We consider our beauty arch a useful help for surgeon in the treatment planning of patients with skeletal malocclusions and malar implants.

Apgar score and dental caries risk in the primary dentition of five year olds.

PubMed

Sanders, A E; Slade, G D

2010-09-01

Conditions in utero and early life underlie risk for several childhood disorders. This study tested the hypothesis that the Apgar score predicted dental caries in the primary dentition. A retrospective cohort study conducted in 2003 examined associations between conditions at birth and early life with dental caries experience at five years. Dental examination data for a random sample of five-year-old South Australian children were obtained from School Dental Service electronic records. A questionnaire mailed to the parents obtained information about neonatal status at delivery (five-minute Apgar score, birthweight, plurality, gestational age) and details about birth order, weaning, and behavioural, familial and sociodemographic characteristics. Of the 1398 sampled children with a completed questionnaire (response rate=64.6%), 1058 were singleton term deliveries among whom prevalence of dental caries was 40.1%. In weighted log-binomial regression analysis, children with an Apgar score of <=8 relative to a score of 9-10 had greater probability of dental caries in the primary dentition after adjusting for sociodemographic and behavioural covariates and water fluoridation concentration (adjusted PR=1.47, 95% CI=1.11, 1.95). Readily accessible markers of early life, such as the Apgar score, may guide clinicians in identifying children at potentially heightened risk for dental caries and aid decision-making in allocating preventive services.

Oral health and welfare state regimes: a cross-national analysis of European countries.

PubMed

Guarnizo-Herreño, Carol C; Tsakos, Georgios; Sheiham, Aubrey; Watt, Richard G

2013-06-01

Very little is known about the potential relationship between welfare state regimes and oral health. This study assessed the oral health of adults in a range of European countries clustered by welfare regimes according to Ferrera's typology and the complementary Eastern type. We analysed data from Eurobarometer wave 72.3, a cross-sectional survey of 31 European countries carried out in 2009. We evaluated three self-reported oral health outcomes: edentulousness, no functional dentition (<20 natural teeth), and oral impacts on daily living. Age-standardized prevalence rates were estimated for each country and for each welfare state regime. The Scandinavian regime showed lower prevalence rates for all outcomes. For edentulousness and no functional dentition, there were higher prevalence rates in the Eastern regime but no significant differences between Anglo-Saxon, Bismarckian, and Southern regimes. The Southern regime presented a higher prevalence of oral impacts on daily living. Results by country indicated that Sweden had the lowest prevalences for edentulousness and no functional dentition, and Denmark had the lowest prevalence for oral impacts. The results suggest that Scandinavian welfare states, with more redistributive and universal welfare policies, had better population oral health. Future research should provide further insights about the potential mechanisms through which welfare-state regimes would influence oral health. © 2013 Eur J Oral Sci.

Dental caries experience among indigenous children and adolescents.

PubMed

Gonçalves, Érica M; Cavalcanti, Laysa C; Firmino, Ramon T; Ribeiro, Gustavo L; Granville-Garcia, Ana F; Menezes, Valdenice A

2015-06-01

Investigations into the oral health status of indigenous populations are scarce. The aim of this study was to evaluate caries experience and associated factors among 342 indigenous children and adolescents aged 5-15 years of the Xukuru community in the municipality of Pesqueira, Brazil. A cross-sectional census study was carried out using the criteria of the World Health Organization to determine caries experience. Examinations were performed by two calibrated dentists and a questionnaire was administered to parents/caregivers addressing socio-demographic data, diet and oral hygiene habits. Logistic regression analysis were performed, with dmft and DMFT as the dependent variables (P < 0.05). Caries experience (dmft/DMFT) was high in both the primary and permanent dentition (75.6% and 62.9%, respectively). Mean dmft and DMFT indices were 3.11 and 2.21, respectively. Caries experience in the primary dentition was associated with children residing in villages far from urban areas (P = 0.016), while caries in the permanent dentition was associated with older children (P < 0.001) and with children from villages at an intermediate distance and far from urban areas (P < 0.001). The indigenous subjects exhibited a high degree of caries experience, which was associated with age and group of villages. Public policies are needed to improve the oral health status of this population.

Oral health and welfare state regimes: a cross-national analysis of European countries

PubMed Central

Guarnizo-Herreño, Carol C; Tsakos, Georgios; Sheiham, Aubrey; Watt, Richard G

2013-01-01

Very little is known about the potential relationship between welfare state regimes and oral health. This study assessed the oral health of adults in a range of European countries clustered by welfare regimes according to Ferrera's typology and the complementary Eastern type. We analysed data from Eurobarometer wave 72.3, a cross-sectional survey of 31 European countries carried out in 2009. We evaluated three self-reported oral health outcomes: edentulousness, no functional dentition (<20 natural teeth), and oral impacts on daily living. Age-standardized prevalence rates were estimated for each country and for each welfare state regime. The Scandinavian regime showed lower prevalence rates for all outcomes. For edentulousness and no functional dentition, there were higher prevalence rates in the Eastern regime but no significant differences between Anglo-Saxon, Bismarckian, and Southern regimes. The Southern regime presented a higher prevalence of oral impacts on daily living. Results by country indicated that Sweden had the lowest prevalences for edentulousness and no functional dentition, and Denmark had the lowest prevalence for oral impacts. The results suggest that Scandinavian welfare states, with more redistributive and universal welfare policies, had better population oral health. Future research should provide further insights about the potential mechanisms through which welfare-state regimes would influence oral health. PMID:23659239

Influence of Custom Trays, Dual-Arch Passive, Flexed Trays and Viscosities of Elastomeric Impression Materials on Working Dies.

PubMed

Arora, Mansi; Kohli, Shivani; Kalsi, Rupali

2016-05-01

Dual arch impression technique signifies an essential improvement in fixed prosthodontics and has numerous benefits over conventional impression techniques. The accuracy of working dies fabricated from dual arch impression technique remains in question because there is little information available in the literature. This study was conducted to compare the accuracy of working dies fabricated from impressions made from two different viscosities of impression materials using metal, plastic dual arch trays and custom made acrylic trays. The study samples were grouped into two groups based on the viscosity of impression material used i.e. Group I (monophase), whereas Group II consisted of Dual Mix technique using a combination of light and heavy body material. These were further divided into three subgroups A, B and C depending on the type of impression tray used (metal dual arch tray, plastic dual arch tray and custom made tray). Measurements of the master cast were made using profile projector. Descriptive statistics like mean, Standard Deviation (SD) were calculated for all the groups. One way analysis of variance (ANOVA) was used for multiple group comparisons. A p-value of 0.05 or less was considered statistically significant. The gypsum dies obtained with the three types of impression trays using two groups of impression materials were smaller than the master models in dimensions. The plastic dual arch trays produced dies which were the least accurate of the three groups. There was no significant difference in the die dimensions obtained using the two viscosities of impression materials.

Influence of Custom Trays, Dual-Arch Passive, Flexed Trays and Viscosities of Elastomeric Impression Materials on Working Dies

PubMed Central

Kohli, Shivani; Kalsi, Rupali

2016-01-01

Introduction Dual arch impression technique signifies an essential improvement in fixed prosthodontics and has numerous benefits over conventional impression techniques. The accuracy of working dies fabricated from dual arch impression technique remains in question because there is little information available in the literature. Aim This study was conducted to compare the accuracy of working dies fabricated from impressions made from two different viscosities of impression materials using metal, plastic dual arch trays and custom made acrylic trays. Materials and Methods The study samples were grouped into two groups based on the viscosity of impression material used i.e. Group I (monophase), whereas Group II consisted of Dual Mix technique using a combination of light and heavy body material. These were further divided into three subgroups A, B and C depending on the type of impression tray used (metal dual arch tray, plastic dual arch tray and custom made tray). Measurements of the master cast were made using profile projector. Descriptive statistics like mean, Standard Deviation (SD) were calculated for all the groups. One way analysis of variance (ANOVA) was used for multiple group comparisons. A p-value of 0.05 or less was considered statistically significant. Results The gypsum dies obtained with the three types of impression trays using two groups of impression materials were smaller than the master models in dimensions. Conclusion The plastic dual arch trays produced dies which were the least accurate of the three groups. There was no significant difference in the die dimensions obtained using the two viscosities of impression materials. PMID:27437342

Analysis of Static Load Test of a Masonry Arch Bridge

NASA Astrophysics Data System (ADS)

Shi, Jing-xian; Fang, Tian-tian; Luo, Sheng

2018-03-01

In order to know whether the carrying capacity of the masonry arch bridge built in the 1980s on the shipping channel entering and coming out of the factory of a cement company can meet the current requirements of Level II Load of highway, through the equivalent load distribution of the test vehicle according to the current design specifications, this paper conducted the load test, evaluated the bearing capacity of the in-service stone arch bridge, and made theoretical analysis combined with Midas Civil. The results showed that under the most unfavorable load conditions the measured strain and deflection of the test sections were less than the calculated values, the bridge was in the elastic stage under the design load; the structural strength and stiffness of the bridge had a certain degree of prosperity, and under the in the current conditions of Level II load of highway, the bridge structure was in a safe state.

Prosthodontic management of worn dentition in pediatric patient with complete overlay dentures: a case report

PubMed Central

Rastogi, Jyoti; Jain, Chandni; Singh, Harkanwal Preet

2012-01-01

Overlay complete dentures are simple, reversible and economical treatment modality for patients with congenital or acquired disorders that severely affect the tooth development. It satisfies both the esthetic and functional demands where the extraction of teeth is not generally indicated. In pediatric patients, the overlay dentures establish a relatively stable occlusion that improves patient's tolerance to the future treatment procedures for worn dentition. This clinical report highlights the imperative need of appropriate treatment strategy and application of maxillary and mandibular overlay dentures in a pediatric patient who suffered from congenitally mutilated and worn dentition. PMID:23236577

Dental treatment in the primary dentition of 7-12 year-old Swedish schoolchildren.

PubMed

Alm, Anita; Wendt, Lill-Kari; Koch, Göran

2003-01-01

In most Swedish counties, epidemiological data on the permanent dentition are collected on all patients aged 7-19 years. For the primary dentition, epidemiological data are only reported for the 3-6-year-old age groups. The purpose of the present study was to investigate what treatments had been made in the primary dentition during the period when the children were 7 to 12 years old. The sample size constituted 10% of all children born in 1987 and regularly treated at Public Dental Service clinics in Jönköping County between 7 and 12 years of age. Data were extracted from the dental records. The most common treatments--new restorations and replacements of restorations--comprised 72% of all treatment. Replacements of restorations constituted 31% of all restorations performed between 7 and 12 years of age, and a majority (81%) of these had been made when the children were 7-9 years old. The mean defs value at 6 years of age was 1.9. The mean number of treatments performed per child between 7 and 12 years of age was 2.5. The result of the present study indicates that more treatments in the primary dentition are performed after 6 years of age than before.

Gingival Zenith Positions and Levels of Maxillary Anterior Dentition in Cases of Bimaxillary Protrusion: A Morphometric Analysis.

PubMed

Gowd, Snigdha; Shankar, T; Chatterjee, Suravi; Mohanty, Pritam; Sahoo, Nivedita; Baratam, Srinivas

2017-08-01

To investigate the two clinical parameters, such as gingival zenith positions (GZPs) and gingival zenith levels (GZLs), of maxillary anterior dentition in bimaxillary protrusion cases and collate it with severiety of crown inclination. Gingival zenith position and GZL in 40 healthy patients (29 females and 11 males) with an average age of 21.5 years were assessed. Inclusion criteria involved absence of periodontal diseases, Angle's class I molar relationship, and upper anterior proclination within 25 to 45° based on Steiner's analysis; exclusion criteria included spacing, crowding, anterior restoration and teeth with incisor attrition or rotation. The GZP was evaluated using digital calipers from voxel-based morphometry (VBM), and GZL was assessed from the tangent drawn from GZP of central incisor and canines to the linear vertical distance of GZP of lateral incisor. All the central incisors showed a GZP distal to VBM with a mean average of 1 mm. Severe proclination between 40 and 45° showed a statistically significant variation. Lateral incisors displayed a mean of 0.5 mm deviation of GZP from the vertically bisected midline. In 80% of canine population, GZP was centralized. We conclude that the degree of proclination of maxillary anterior dentition was correlated to the gingival contour in bimaxillary cases. The investigation revealed that there is a variation in the location of GZP as the severity of proclination increases. This study highlights the importance of microesthetics in fixed orthodontic treatment. The gingival contour should be unaltered while retraction during management of bimaxillary protrusion.

Effect of Crown Angulation of Maxillary Incisor on Effective Arch Perimeter.

PubMed

Jain, Megha; Vyas, Matrishva; Singh, Johar Rajvinder

2017-06-01

It has been postulated that crown angulation and inclination has potential space implication within the arch. With the insight of space implication of the axial relations of teeth, cases of genuine tooth size discrepancies can be dealt with improved stability. This in vitro study was designed to investigate and quantify the influence of angulation and inclination of maxillary incisors on the effective arch perimeter. Acrylic teeth were arranged over typhodont frame with spaced maxillary anterior segment. Known value of tip and torque in increments were incorporated to maxillary incisors through bracket positioning and corresponding consumption of the interdental spaces were measured using coordinate measuring machine. Study revealed that increase in maxillary incisor crown angulation by 1o results in consumption of approximately 0.012 mm of arch perimeter. Similarly, there is a consumption of 0.021 mm of arch perimeter with each degree increase in labial crown inclination. The knowledge of the space implication can be included in the space analysis during the orthodontic treatment planning. Depending upon the amount of space discrepancy, an accurate degree of required alteration in the axial relation of one or more teeth can be planned.

Effect of Crown Angulation of Maxillary Incisor on Effective Arch Perimeter

PubMed Central

Vyas, Matrishva; Singh, Johar Rajvinder

2017-01-01

Introduction It has been postulated that crown angulation and inclination has potential space implication within the arch. With the insight of space implication of the axial relations of teeth, cases of genuine tooth size discrepancies can be dealt with improved stability. Aim This in vitro study was designed to investigate and quantify the influence of angulation and inclination of maxillary incisors on the effective arch perimeter. Materials and Methods Acrylic teeth were arranged over typhodont frame with spaced maxillary anterior segment. Known value of tip and torque in increments were incorporated to maxillary incisors through bracket positioning and corresponding consumption of the interdental spaces were measured using coordinate measuring machine. Results Study revealed that increase in maxillary incisor crown angulation by 1o results in consumption of approximately 0.012 mm of arch perimeter. Similarly, there is a consumption of 0.021 mm of arch perimeter with each degree increase in labial crown inclination. Conclusion The knowledge of the space implication can be included in the space analysis during the orthodontic treatment planning. Depending upon the amount of space discrepancy, an accurate degree of required alteration in the axial relation of one or more teeth can be planned. PMID:28764302

An anthropometric analysis of facial height, arch length, and palatal rugae in the Indian and Nepalese population.

PubMed

Kallianpur, Shreenivas; Desai, Ami; Kasetty, Sowmya; Sudheendra, Us; Joshi, Prathamesh

2011-01-01

A country such as India abounds with diverse population groups with distinct anthropometric characteristics. Among these, numerous Nepalese population groups are present in different states of India comprising one of the most common immigrant races. The aim of the study is to compare two distinct races, Indians and Nepalese on the basis of facial height proportions, arch length and palatal rugae patterns and assess their significance in racial identification. A total of 120 subjects comprising of 60 Indians and 60 Nepalese were selected, with each group including 30 males and 30 females. Facial heights were measured using sliding digital calipers, arch lengths with the help of a brass wire and rugae patterns were traced on dental casts obtained with alginate impressions. Facial height measurements did not give significant results for racial or gender identification of given races. Differences between arch length parameters were found to be significant between the two population groups. Secondary and fragmentary palatal rugae forms were found to be more common in Nepalese than Indians. The Indian and Nepalese have similar anthropometric characteristics with regard to facial height. However, arch length and palatal rugae characteristics vary between the two races.

Alteration of maxillary and mandibular growth of adult patients with unoperated isolated cleft palate.

PubMed

Yang, Yunqiang; Wu, Yeke; Gu, Yifei; Yang, Qijian; Shi, Bing; Zheng, Qian; Wang, Yan

2013-07-01

The objective of this study was to investigate the effects of cleft palate itself on the growth of maxilla and mandible. Fifty-two adult female patients with unoperated isolated cleft palate and 52 adult female individuals with normal occlusion were included in our study. Computer software was used for lateral cephalometry measurement. Manual measurement was performed for dental cast measurements, and sample t test analysis was applied to analyze the differences between the 2 groups using SPSS 17.0. The sella-nasion-subspinale point angle, subspinale-nasion-supramentale point angle, and maxillary arch length of the cleft group were significantly smaller than those of the control group (P < 0.01). Both maxillary and mandibular posterior dental arch widths of the cleft group were significantly larger compared with the control group (P < 0.01), whereas the sella-nasion-supramentale point angle, mandible arch length, palate height, and palate shelf inclination did not differ between the 2 groups. The measurements did not differ between the submucosal cleft and the overt cleft patients. Cleft palate itself has adverse effects on the maxilla growth with shorter maxillary arch length and wider posterior dental arch width.

Interrupted Aortic Arch Type B in A Patient with Cat Eye Syndrome

PubMed Central

Belangero, Sintia Iole Nogueira; Bellucco, Fernanda Teixeira da Silva; Cernach, Mirlene C. S. P.; Hacker, April M.; Emanuel, Beverly S.; Melaragno, Maria Isabel

2010-01-01

We report a patient with cat eye syndrome and interrupted aortic arch type B, a typical finding in the 22q11.2 deletion syndrome. Chromosomal analysis and fluorescent in situ hybridization (FISH) showed a supernumerary bisatellited isodicentric marker chromosome derived from chromosome 22. The segment from 22pter to 22q11.2 in the supernumerary chromosome found in our patient does not overlap with the region deleted in patients with the 22q11.2 deletion syndrome. However, the finding of an interrupted aortic arch type B is unusual in CES, although it is a frequent heart defect in the 22q11 deletion syndrome. PMID:19629279

Simulation of Structures Exhibiting Instability Under Thermal-Mechanical Transient Loading

DTIC Science & Technology

2015-08-25

4 2.1.4 Application to half- sine arches...shallow arches ....................................................... 9 2.2.2 Half- sine arches... sine arches, parabolic arches and cylindrical panels. 2.1 Arches with Geometric Imperfections The nonlinear equilibrium and buckling equations are

Risk of developing palatally displaced canines in patients with early detectable dental anomalies: a retrospective cohort study

PubMed Central

GARIB, Daniela Gamba; LANCIA, Melissa; KATO, Renata Mayumi; OLIVEIRA, Thais Marchini; NEVES, Lucimara Teixeira das

2016-01-01

ABSTRACT The early recognition of risk factors for the occurrence of palatally displaced canines (PDC) can increase the possibility of impaction prevention. Objective To estimate the risk of PDC occurrence in children with dental anomalies identified early during mixed dentition. Material and Methods The sample comprised 730 longitudinal orthodontic records from children (448 females and 282 males) with an initial mean age of 8.3 years (SD=1.36). The dental anomaly group (DA) included 263 records of patients with at least one dental anomaly identified in the initial or middle mixed dentition. The non-dental anomaly group (NDA) was composed of 467 records of patients with no dental anomalies. The occurrence of PDC in both groups was diagnosed using panoramic and periapical radiographs taken in the late mixed dentition or early permanent dentition. The prevalence of PDC in patients with and without early diagnosed dental anomalies was compared using the chi-square test (p<0.01), relative risk assessments (RR), and positive and negative predictive values (PPV and NPV). Results PDC frequency was 16.35% and 6.2% in DA and NDA groups, respectively. A statistically significant difference was observed between groups (p<0.01), with greater risk of PDC development in the DA group (RR=2.63). The PPV and NPV was 16% and 93%, respectively. Small maxillary lateral incisors, deciduous molar infraocclusion, and mandibular second premolar distoangulation were associated with PDC. Conclusion Children with dental anomalies diagnosed during early mixed dentition have an approximately two and a half fold increased risk of developing PDC during late mixed dentition compared with children without dental anomalies. PMID:28076458

The prevalence, pattern and clinical presentation of developmental dental hard-tissue anomalies in children with primary and mix dentition from Ile-Ife, Nigeria.

PubMed

Temilola, Dada Oluwaseyi; Folayan, Morenike Oluwatoyin; Fatusi, Olawunmi; Chukwumah, Nneka Maureen; Onyejaka, Nneka; Oziegbe, Elizabeth; Oyedele, Titus; Kolawole, Kikelomo Adebanke; Agbaje, Hakeem

2014-10-16

The study of dental anomalies is important because it generates information that is important for both the anthropological and clinical management of patients. The objective of this study is to determine the prevalence and pattern of presentation of dental hard-tissue developmental anomalies in the mix dentition of children residing in Ile-Ife, a suburban region of Nigeria. Information on age, sex and socioeconomic status was collected from 1,036 children aged four months to 12 years through a household survey. Clinical examination was conducted to assess the presence of dental anomalies. Associations between age, sex, socioeconomic status, prevalence, and pattern of presentation of the developmental hard-tissue dental anomalies were determined. Two hundred and seventy six (26.6%) children had dental anomalies. Of these, 23.8% had one anomaly, 2.5% had two anomalies, and 0.3% had more than two anomalies. Of the children with anomalies, 49.3%were male, 50.7%were female, and 47.8%, 28.6% and 23.6% were children from low, middle and high socioeconomic classes, respectively. More anomalies were seen in permanent than primary dentition. Anomalies of tooth structure were most prevalent (16.1%); anomalies which affect tooth number were least prevalent (1.3%). Dens evaginatus, peg-shaped lateral, macrodontia, and talon cusp were more prevalent in the permanent dentition, and dens evaginatus peg-shaped lateral and macrodontia were more prevalent in the maxilla. There were significantly more macrodontia anomalies in males and in children of high socioeconomic status. This large survey of dental hard-tissue anomalies found in the primary dentition and mixed dentition of children in Nigeria provides anthropological and clinical data that may aid the detection and management of dental problems of children in Nigeria.

Does dental caries affect dental development in children and adolescents?

PubMed Central

Dhamo, Brunilda; Elezi, Besiana; Kragt, Lea; Wolvius, Eppo B; Ongkosuwito, Edwin M

2018-01-01

Although a link between dietary changes, caries, and dental development has been observed, the literature provides little insight about this relationship. The aim of our study was to investigate the association between dental caries and dental development in a clinical sample of Albanian children and adolescents. In total, 118 children and adolescents, born between 1995 and 2004 and aged 6–15 years, were included. Dental caries in the deciduous dentition was assessed using the Decayed, Filled Teeth (dft) index and dental caries in the permanent dentition was assessed using the Decayed, Missing, Filled Teeth (DMFT) index. Dental development during the permanent dentition was determined using the Demirjian method. Linear and ordinal regression models were applied to analyze the associations of dental caries with dental age and developmental stages of each left mandibular tooth. Dental caries in the deciduous dentition, estimated as a median dft of 2.0 (90% range, 0.0–9.1), was significantly associated with lower dental age (β = -0.21; 90% CI: -0.29, -0.12) and with delayed development of the canine, both premolars, and the second molar. Untreated dental caries (dt) was associated with lower dental age (β = -0.19; 90% CI: -0.28, -0.10). Dental caries in the permanent dentition, estimated as a median DMFT of 1.0 (90% range, 0.0–8.0), was not significantly associated with dental age (β = 0.05; 90% CI: -0.04, 0.14). However, the DMFT was associated with the advanced stages of development of both premolars and the second molar. The untreated dental caries in the deciduous dentition delays the development of permanent teeth. PMID:29659350

Changes in the prevalence of dental caries in primary school children in Lagos State, Nigeria.

PubMed

Sofola, O O; Folayan, M O; Oginni, A B

2014-01-01

To evaluate the changes in the prevalence of dental caries in Lagos State over a 3 years period and the role of age, sex, and playing in the changes observed. Three primary schools in Lagos State, Nigeria were randomly selected for the study. Six hundred and thirty-three children age 2-12 years, were examined for caries in 2000 while 513 children were examined in 2003. The prevalence of tooth decay and the prevalence of untreated tooth decay were calculated for the two years, that is, 2000 and 2003. Also the degree of unmet treatment need among the population with caries experience was measured. Differences in the prevalence and severity of dental caries in the primary and permanent dentition were assessed. Approximately 18% of children had untreated tooth decay in their primary dentition in 2003: A 26.1% increase from 2000. About 12.0% of the decay, extracted, and filled teeth (deft) index was seen with decayed teeth in 2000 and 16.6% in 2003. Extracted primary teeth decreased from 2.5% in 2000 to 1.5% in 2003. The change in mean deft between 2000 (0.42) and 2003 (0.47) was 11.9%. Over the study period, the overall reduction in the prevalence of dental caries was 34.8% in the permanent dentition. The decline was larger among children aged 5-9 years (62.1%) and among females (75%). The study showed no overall changes in caries severity but a decrease in caries prevalence in the permanent dentition over the study period. The largest decline in caries prevalence in the permanent dentition was observed in children aged 5-9 years and females. On the contrary, there was an increase in the caries prevalence in the primary dentition.

Simulation analysis of temperature control on RCC arch dam of hydropower station

NASA Astrophysics Data System (ADS)

XIA, Shi-fa

2017-12-01

The temperature analysis of roller compacted concrete (RCC) dam plays an important role in their design and construction. Based on three-dimensional finite element method, in the computation of temperature field, many cases are included, such as air temperature, elevated temperature by cement hydration heat, concrete temperature during placing, the influence of water in the reservoir, and boundary temperature. According to the corresponding parameters of RCC arch dam, the analysis of temperature field and stress field during the period of construction and operation is performed. The study demonstrates that detailed thermal stress analysis should be performed for RCC dams to provide a basis to minimize and control the occurrence of thermal cracking.

Reliability and Correlation of Static and Dynamic Foot Arch Measurement in a Healthy Pediatric Population.

PubMed

Scholz, Timo; Zech, Astrid; Wegscheider, Karl; Lezius, Susanne; Braumann, Klaus-Michael; Sehner, Susanne; Hollander, Karsten

2017-09-01

Measurement of the medial longitudinal foot arch in children is a controversial topic, as there are many different methods without a definite standard procedure. The purpose of this study was to 1) investigate intraday and interrater reliability regarding dynamic arch index and static arch height, 2) explore the correlation between both arch indices, and 3) examine the variation of the medial longitudinal arch at two different times of the day. Eighty-six children (mean ± SD age, 8.9 ± 1.9 years) participated in the study. Dynamic footprint data were captured with a pedobarographic platform. For static arch measurements, a specially constructed caliper was used to assess heel-to-toe length and dorsum height. A mixed model was established to determine reliability and variation. Reliability was found to be excellent for the static arch height index in sitting (intraday, 0.90; interrater, 0.80) and standing positions (0.88 and 0.85) and for the dynamic arch index (both 1.00). There was poor correlation between static and dynamic assessment of the medial longitudinal arch (standing dynamic arch index, r = -0.138; sitting dynamic arch index, r = -0.070). Static measurements were found to be significantly influenced by the time of day (P < .001), whereas the dynamic arch index was unchanged (P = .845). This study revealed some further important findings. The static arch height index is influenced by gender (P = .004), whereas dynamic arch index is influenced by side (P = .011) and body mass index (P < .001). Dynamic and static foot measurements are reliable for medial longitudinal foot arch assessment in children. The variation of static arch measurements during the day has to be kept in mind. For clinical purposes, static and dynamic arch data should be interpreted separately.

Agreement in the determination of preformed wire shape templates on plaster models and customized digital arch form diagrams on digital models.

PubMed

Camardella, Leonardo Tavares; Sá, Maiara da Silva Bezerra; Guimarães, Luciana Campos; Vilella, Beatriz de Souza; Vilella, Oswaldo de Vasconcellos

2018-03-01

The aim of this study was to verify the accuracy of preformed wire shape templates on plaster models and those of customized digital arch form diagrams on digital models. Twenty pairs of dental plaster models were randomly selected from the archives of the Department of Orthodontics of Federal Fluminense University, Niterói, Rio de Janeiro, Brazil. All plaster model samples were scanned in a plaster model scanner to create the respective digital models. Three examiners defined the arch form on the mandibular arch of these models by selecting the ideal preformed wire shape template on each plaster model or by making a customized digital arch form on the digital models using a digital arch form customization tool. These 2 arch forms were superimposed by the best-fit method. The greatest differences in the 6 regions on the superimposed arches were evaluated. Each examiner presented a descriptive analysis with the means, standard deviation, and minimum and maximum intervals of the differences on the superimpositions. Intraclass correlation coefficient and paired t tests were used to evaluate the accuracy of the superimpositions. Among the 6 regions analyzed in the superimpositions, the largest differences in the anterior and premolar regions were considered clinically insignificant, whereas the largest differences in the right molar region, especially the second molar area, were considered clinically significant by all 3 examiners. The intraclass correlation coefficients showed a weak correlation in the premolar region and moderate correlations in the anterior and molar regions. The paired t test showed statistically significant differences in the left anterior and premolar regions. The superimpositions between the arch forms on plaster and digital models were considered accurate, and the differences were not clinically significant, with the exception of the second molar area. Despite the favorable results, the requirement of correcting some software problems may hamper the transition from plaster to digital models. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Classification of the height and flexibility of the medial longitudinal arch of the foot.

PubMed

Nilsson, Mette Kjærgaard; Friis, Rikke; Michaelsen, Maria Skjoldahl; Jakobsen, Patrick Abildgaard; Nielsen, Rasmus Oestergaard

2012-02-17

The risk of developing injuries during standing work may vary between persons with different foot types. High arched and low arched feet, as well as rigid and flexible feet, are considered to have different injury profiles, while those with normal arches may sustain fewer injuries. However, the cut-off values for maximum values (subtalar position during weight-bearing) and range of motion (ROM) values (difference between subtalar neutral and subtalar resting position in a weight-bearing condition) for the medial longitudinal arch (MLA) are largely unknown. The purpose of this study was to identify cut-off values for maximum values and ROM of the MLA of the foot during static tests and to identify factors influencing foot posture. The participants consisted of 254 volunteers from Central and Northern Denmark (198 m/56 f; age 39.0 ± 11.7 years; BMI 27.3 ± 4.7 kg/m2). Navicular height (NH), longitudinal arch angle (LAA) and Feiss line (FL) were measured for either the left or the right foot in a subtalar neutral position and subtalar resting position. Maximum values and ROM were calculated for each test. The 95% and 68% prediction intervals were used as cut-off limits. Multiple regression analysis was used to detect influencing factors on foot posture. The 68% cut-off values for maximum MLA values and MLA ROM for NH were 3.6 to 5.5 cm and 0.6 to 1.8 cm, respectively, without taking into account the influence of other variables. Normal maximum LAA values were between 131 and 152° and normal LAA ROM was between -1 and 13°. Normal maximum FL values were between -2.6 and -1.2 cm and normal FL ROM was between -0.1 and 0.9 cm. Results from the multivariate linear regression revealed an association between foot size with FL, LAA, and navicular drop. The cut-off values presented in this study can be used to categorize people performing standing work into groups of different foot arch types. The results of this study are important for investigating a possible link between arch height and arch movement and the development of injuries.

A comparative study of inter-abutment distance of dies made from full arch dual-arch impression trays with those made from full arch stock trays: an in vitro study.

PubMed

Reddy, Jagan Mohan; Prashanti, E; Kumar, G Vinay; Suresh Sajjan, M C; Mathew, Xavier

2009-01-01

The dual-arch impression technique is convenient in that it makes the required maxillary and mandibular impressions, as well as the inter-occlusal record in one procedure. The accuracy of inter-abutment distance in dies fabricated from dual-arch impression technique remains in question because there is little information available in the literature. This study was conducted to evaluate the accuracy of inter-abutment distance in dies obtained from full arch dual-arch trays with those obtained from full arch stock metal trays. The metal dual-arch trays showed better accuracy followed by the plastic dual-arch and stock dentulous trays, respectively, though statistically insignificant. The pouring sequence did not have any effect on the inter-abutment distance statistically, though pouring the non-working side of the dual-arch impression first showed better accuracy.

Relationship between patients' oral health-related quality of life, satisfaction with dentition, and personality profiles.

PubMed

Karasneh, Jumana; Al-Omiri, Mahmoud K; Al-Hamad, Khaled Q; Al Quran, Firas A M

2009-11-01

The aim of this study was to investigate the relationship between patients' oral health-related quality of life, satisfaction with their dentition, and their personality profiles. Eighty-four patients (30 males and 54 females; mean age 31.9+/-12.7 years) seeking routine dental treatment were recruited for this study. A "Dental Impact on Daily Living" (DIDL) questionnaire was used to assess dental satisfaction and impact on daily living. An "Oral Health Impact Profile" (OHIP) was used to measure self-reported discomfort, disability, and dysfunction caused by oral conditions. Oral health-related quality of life was assessed using the "United Kingdom Oral Health Related Quality of Life" measure (OHQoL-U.K). A "NEO Five Factor inventory" (NEO-FFI) was used to assess personality profiles. The dentition has a measurable impact on daily living as well as with satisfaction with appearance, pain levels, oral comfort, general performance, and eating capability (p=0.000). Younger patients had more profound oral health impacts (p=0.045) and higher neuroticism scores (0.043). OHIP scores were significantly related to OHQoL-UK scores (p=0.000). DIDL scores had significant correlations with OHIP and OHQoL-UK scores (p<0.05). Significant correlations were established between neuroticism and satisfaction with oral comfort, extraversion and total satisfaction and satisfaction with general performance, and openness and satisfaction with appearance (p<0.05). OHIP and OHQoL-UK scores had no significant correlations with psychological profiles. The status of the oral cavity can have a definitive impact on patients' daily living and quality of life regardless age, gender, and level of education. Patients' satisfaction with their dentition has definitive impacts on daily living, quality of life, and dental perceptions. Personality profiles (neuroticism; extraversion, and openness) may influence dental perceptions, play a significant role in shaping satisfaction with dentition, and help with the prediction of the dental impact on daily living. Since patients' satisfaction with their dentitions impacts their daily living and quality of life while affected by their psychological profiles, this should be considered when formulating a treatment plan for management for their dentition in order to obtain patient acceptance of the proposed treatment.

Injury-reduction effectiveness of prescribing running shoes on the basis of foot arch height: summary of military investigations.

PubMed

Knapik, Joseph J; Trone, Daniel W; Tchandja, Juste; Jones, Bruce H

2014-10-01

Secondary analysis of 3 randomized controlled trials. Objective Analysis of studies that examined whether prescribing running shoes on the basis of foot arch height influenced injury risk during military basic training. Prior to 2007, running magazines and running-shoe companies suggested that imprints of the bottom of the feet (plantar shape) could be used as an indication of foot arch height and that this could be used to select individually appropriate types of running shoes. Similar studies were conducted in US Army (2168 men, 951 women), Air Force (1955 men, 718 women), and Marine Corps (840 men, 571 women) basic training. After foot examinations, recruits were randomized to either an experimental or a control group. Recruits in the experimental group selected or were assigned motion-control, stability, or cushioned shoes to match their plantar shape, which represented a low, medium, or high foot arch, respectively. The control group received a stability shoe regardless of plantar shape. Injuries during basic training were assessed from outpatient medical records. Meta-analyses that pooled results of the 3 investigations showed little difference between the experimental and control groups in the injury rate (injuries per 1000 person-days) for either men (summary rate ratio = 0.97; 95% confidence interval [CI]: 0.88, 1.06) or women (summary rate ratio = 0.97; 95% CI: 0.85, 1.08). When injury rates for specific types of running shoes were compared, there were no differences. Selecting running shoes based on arch height had little influence on injury risk in military basic training. Prevention, level 1b.

Suppressive effect of pitavastatin on aortic arch dilatation in acute stanford type B aortic dissection: analysis of STANP trial.

PubMed

Masaki, Naoki; Kumagai, Kiichiro; Sasaki, Konosuke; Matsuo, Satoshi; Motoyoshi, Naotaka; Adachi, Osamu; Akiyama, Masatoshi; Kawamoto, Shunsuke; Tabayashi, Koichi; Saiki, Yoshikatsu

2018-04-06

Medical therapy for patients with uncomplicated acute type B aortic dissection (ABAD) is essentially accepted for its excellent early outcome; however, long-term outcomes have not been satisfactory due to aorta-related complications. This trial was performed to investigate the efficacy of a statin as an additive that may enhance the effectiveness of conventional medical treatment in patients with ABAD. This was a multi-center, prospective, and randomized comparative investigation of patients with uncomplicated ABAD. Fifty patients with ABAD compatible with inclusion criteria were randomly assigned to two groups and then received administration of pitavastatin (group P) or not (group C). We followed up the patients for 1 year from study onset. Two patients demised during the follow-up period (both were in group C). In addition, aorta-related interventions were performed in two patients (entry closure for aortic dissection by endovascular repair in one patient in each group). Aortic arch diameters at 1 year in group P tended to be smaller than in group C (P = 0.17), and the rate of change of the aortic arch diameters from onset to 1 year was significantly lower in group P (P = 0.046). Multivariate analysis identified patency of the false lumen was detected as a risk factor for aortic arch dilatation (P = 0.02), and pitavastatin intake was a negative risk factor (P = 0.03). Pitavastatin treatment, in addition to the standard antihypertensive therapy, may have a suppressive effect on aortic arch dilatation in patients with ABAD.

Separation of overlapping dental arch objects using digital records of illuminated plaster casts.

PubMed

Yadollahi, Mohammadreza; Procházka, Aleš; Kašparová, Magdaléna; Vyšata, Oldřich; Mařík, Vladimír

2015-07-11

Plaster casts of individual patients are important for orthodontic specialists during the treatment process and their analysis is still a standard diagnostical tool. But the growing capabilities of information technology enable their replacement by digital models obtained by complex scanning systems. This paper presents the possibility of using a digital camera as a simple instrument to obtain the set of digital images for analysis and evaluation of the treatment using appropriate mathematical tools of image processing. The methods studied in this paper include the segmentation of overlapping dental bodies and the use of different illumination sources to increase the reliability of the separation process. The circular Hough transform, region growing with multiple seed points, and the convex hull detection method are applied to the segmentation of orthodontic plaster cast images to identify dental arch objects and their sizes. The proposed algorithm presents the methodology of improving the accuracy of segmentation of dental arch components using combined illumination sources. Dental arch parameters and distances between the canines and premolars for different segmentation methods were used as a measure to compare the results obtained. A new method of segmentation of overlapping dental arch components using digital records of illuminated plaster casts provides information with the precision required for orthodontic treatment. The distance between corresponding teeth was evaluated with a mean error of 1.38% and the Dice similarity coefficient of the evaluated dental bodies boundaries reached 0.9436 with a false positive rate [Formula: see text] and false negative rate [Formula: see text].

Cortical bone stress distribution in mandibles with different configurations restored with prefabricated bar-prosthesis protocol: a three-dimensional finite-element analysis.

PubMed

de Almeida, Erika Oliveira; Rocha, Eduardo Passos; Assunção, Wirley Gonçalves; Júnior, Amílcar Chagas Freitas; Anchieta, Rodolfo Bruniera

2011-01-01

To evaluate stress distribution in different horizontal mandibular arch formats restored by protocol-type prostheses using three-dimensional finite element analysis (3D-FEA). A representative model (M) of a completely edentulous mandible restored with a prefabricated bar using four interforaminal implants was created using SolidWorks 2010 software (Inovart, São Paulo, Brazil) and analyzed by Ansys Workbench 10.0 (Swanson Analysis Inc., Houston, PA) to obtain the stress fields. Three mandibular arch sizes were considered for analysis, regular (M), small (MS), and large (ML). Three unilateral posterior loads (L) (150 N) were used: perpendicular to the prefabricated bar (L1); 30° oblique in a buccolingual direction (L2); 30° oblique in a lingual-buccal direction (L3). The maximum and minimum principal stresses (σ(max), σ(min)), the equivalent von Mises (σ(vM)), and the maximum principal strain (σ(max) ) were obtained for type I (M.I) and type II (M.II) cortical bones. Tensile stress was more evident than compression stress in type I and II bone; however, type II bone showed lower stress values. The L2 condition showed highest values for all parameters (σ(vM), σ(max), σ(min), ɛ(max)). The σ(vM) was highest for the large and small mandibular arches. The large arch model had a higher influence on σ(max) values than did the other formats, mainly for type I bone. Vertical and buccolingual loads showed considerable influence on both σ(max) and σ(min) stresses. © 2010 by The American College of Prosthodontists.

Computational analysis of hybrid Norwood circulation with distal aortic arch obstruction and reverse Blalock-Taussig shunt.

PubMed

Ceballos, Andres; Argueta-Morales, I Ricardo; Divo, Eduardo; Osorio, Ruben; Caldarone, Christopher A; Kassab, Alain J; Decampli, William M

2012-11-01

The hemodynamics characteristics of the hybrid Norwood (HN) procedure differ from those of the conventional Norwood and are not fully understood. We present a multiscale model of HN circulation to understand local hemodynamics and effects of aortic arch stenosis and a reverse Blalock-Taussig shunt (RBTS) on coronary and carotid perfusion. Four 3-dimensional models of four HN anatomic variants were developed, with and without 90% distal preductal arch stenosis and with and without a 4-mm RBTS. A lumped parameter model of the circulation was coupled to a local 3-dimensional computational fluid dynamics model. Outputs from the lumped parameter model provided waveform boundary conditions for the computational fluid dynamics model. A 90% distal arch stenosis reduced pressure and net flow-rate through the coronary and carotid arteries by 30%. Addition of the RBTS completely restored pressure and flow rate to baseline in these vessels. Zones of flow stagnation, flow reversal, and recirculation in the presence of stenosis were rendered more orderly by addition of the RBTS. In the absence of stenosis, presence of the shunt resulted in extensive zones of disturbed flow within the RBTS and arch. We found that a 4-mm × 21-mm RBTS completely compensated for the effects of a 90% discrete stenosis of the distal aortic arch in the HN. Placed preventatively, the RBTS and arch displayed zones with thrombogenic potential showing recirculation and stagnation that persist for a substantial fraction of the cardiac cycle, indicating that anticoagulation should be considered with a prophylactic RBTS. Copyright © 2012 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Machine-learning phenotypic classification of bicuspid aortopathy.

PubMed

Wojnarski, Charles M; Roselli, Eric E; Idrees, Jay J; Zhu, Yuanjia; Carnes, Theresa A; Lowry, Ashley M; Collier, Patrick H; Griffin, Brian; Ehrlinger, John; Blackstone, Eugene H; Svensson, Lars G; Lytle, Bruce W

2018-02-01

Bicuspid aortic valves (BAV) are associated with incompletely characterized aortopathy. Our objectives were to identify distinct patterns of aortopathy using machine-learning methods and characterize their association with valve morphology and patient characteristics. We analyzed preoperative 3-dimensional computed tomography reconstructions for 656 patients with BAV undergoing ascending aorta surgery between January 2002 and January 2014. Unsupervised partitioning around medoids was used to cluster aortic dimensions. Group differences were identified using polytomous random forest analysis. Three distinct aneurysm phenotypes were identified: root (n = 83; 13%), with predominant dilatation at sinuses of Valsalva; ascending (n = 364; 55%), with supracoronary enlargement rarely extending past the brachiocephalic artery; and arch (n = 209; 32%), with aortic arch dilatation. The arch phenotype had the greatest association with right-noncoronary cusp fusion: 29%, versus 13% for ascending and 15% for root phenotypes (P < .0001). Severe valve regurgitation was most prevalent in root phenotype (57%), followed by ascending (34%) and arch phenotypes (25%; P < .0001). Aortic stenosis was most prevalent in arch phenotype (62%), followed by ascending (50%) and root phenotypes (28%; P < .0001). Patient age increased as the extent of aneurysm became more distal (root, 49 years; ascending, 53 years; arch, 57 years; P < .0001), and root phenotype was associated with greater male predominance compared with ascending and arch phenotypes (94%, 76%, and 70%, respectively; P < .0001). Phenotypes were visually recognizable with 94% accuracy. Three distinct phenotypes of bicuspid valve-associated aortopathy were identified using machine-learning methodology. Patient characteristics and valvular dysfunction vary by phenotype, suggesting that the location of aortic pathology may be related to the underlying pathophysiology of this disease. Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Effects of foot orthoses with medial arch support and lateral wedge on knee adduction moment in patients with medial knee osteoarthritis.

PubMed

Dessery, Yoann; Belzile, Étienne; Turmel, Sylvie; Corbeil, Philippe

2017-08-01

There is contradictory evidence regarding whether the addition of medial arch supports to laterally wedged insoles reduces knee adduction moment, improves comfort, and reduces knee pain during the late stance phase of gait. To verify if such effects occur in participants with medial knee osteoarthritis. Randomized single-blinded study. Gait analysis was performed on 18 patients affected by medial knee osteoarthritis. Pain and comfort scores, frontal plane kinematics and kinetics of ankle, knee, and hip were compared in four conditions: without foot orthosis, with foot orthoses, with medial arch support, and with foot orthoses with medial arch support and lateral wedge insoles with 6° and 10° inclination. Lower-extremity gait kinetics were characterized by a significant decrease, greater than 6%, in second peak knee adduction moment in laterally wedged insole conditions compared to the other conditions ( p < 0.001; effect size = 0.6). No significant difference in knee adduction moment was observed between laterally wedged insole conditions. In contrast, a significant increase of 7% in knee adduction moment during the loading response was observed in the customized foot orthoses without lateral inclination condition ( p < 0.001; effect size = 0.3). No difference was found in comfort or pain ratings between conditions. Our study suggests that customized foot orthoses with a medial arch support may only be suitable for the management of medial knee osteoarthritis when a lateral wedge is included. Clinical relevance Our data suggest that customized foot orthoses with medial arch support and a lateral wedge reduce knee loading in patients with medial knee osteoarthritis (KOA). We also found evidence that medial arch support may increase knee loading, which could potentially be detrimental in KOA patients.

The influence of the lateral pharyngeal wall anatomy on snoring and sleep apnoea.

PubMed

Korhan, Ibrahim; Gode, Sercan; Midilli, Rasit; Basoglu, Ozen Kacmaz

2015-02-01

To elucidate the variations of the lateral pharyngeal wall anatomy on physical examination and to assess the clinical importance of the examination of the lateral pharyngeal wall on the presence and severity of obstructive sleep apnoea syndrome. The cross-sectional study was conducted at Ege University Medical School, Izmir, Turkey, between May 2010 and April 2011. The patients were divided into four equal groups: Group 1--snoring without apnoea (age 20-40); Group 2--snoring without apnoea (age 40-60); Group 3--apnoea-hypopnoea index < 5/hr; Group 4: apnoea-hypopnoea index > 30/hr. Calibrated oropharynx pictures were taken. Distance between palatoglossal and palatopharyngeal arches, height of palatoglossal and palatopharyngeal arches, uvula width, uvula length and distance between tonsils were measured. SPSS 17 was used for statistical analysis. Of the 80 patients in the study, 44 (55%) were men. Mean distance between palatopharyngeal and palatoglossal arches were 1.55 ± 0.34 cm and 2.70 ± 0.43 cm respectively. Mean height of palatopharyngeal and palatoglossal arches were 0.60 ± 0.21 cm and 1.37 ± 0.36 cm respectively (p > 0.05). Mean uvula width and uvula length were 0.80 ± 0.12cm and 1.25 ± 0.27 cm respectively (p > 0.05). Mean distance between tonsils was 2.24 ± 0.56 cm (p > 0.05). Distance between palatopharyngeal arches was significantly different between groups 3 and 4 (p < 0.05). Palatopharyngeal arch anatomy was found to be significantly associated with obstructive sleep apnoea syndrome severity, especially in patients with normal or small tonsil size. Patients with the palatopharyngeal arches, which narrow the oropharyngeal inlet more than the tonsils, should further be investigated with polysomnography.

Timetable for oral prevention in childhood--developing dentition and oral habits: a current opinion.

PubMed

Majorana, Alessandra; Bardellini, Elena; Amadori, Francesca; Conti, Giulio; Polimeni, Antonella

2015-01-01

As most of the etiologic factors of malocclusion are of genetic origin and thus cannot be prevented, environmental causative factors have become the focus for correction. Early interception of oral habits may be an important step in order to prevent occlusal disturbances in children. The identification of an abnormal habit and the assessment of its potential immediate and long-term effects on the dentition and potentially on the craniofacial complex should be made at an early stage. This paper focuses on the most common oral habits influencing dentofacial growth in childhood and management of these habits in the developing dentition.

Direct Placement Composite: the Treatment Modality of Choice to Restore the Worn or Eroded Dentition in Primary Dental Care.

PubMed

Milosevic, Alex

2016-08-01

Tooth wear is increasing in severity and prevalence, partly because of an ageing population and partly because of modern lifestyles. Management of the worn dentition with 'full mouth rehabilitation' is outmoded. This clinical paper aims to review the literature on composite restorations and give general dental practitioners the confidence to restore the worn dentition with dental composite. Composite is a versatile and widely available material that can be successfully applied within the existing occlusal vertical dimension (OVD) or at an increased OVD using a Dahl approach. Cases illustrate what is achievable, and clinical tips will help dentists optimise their results.

Developing pongid dentition and its use for ageing individual crania in comparative cross-sectional growth studies.

PubMed

Dean, M C; Wood, B A

1981-01-01

This study of the developing pongid dentition is based on cross-sectional radiographic data of juvenile Pan troglodytes, Gorilla gorilla, and Pongo pygmaeus skulls. Comparisons with developmental features of the human dentition are made, and possible explanations for the formation of larger teeth within the reduced pongid growth period are discussed. The data presented in this study provide an alternative method for ageing individual pongid crania in comparative cross-sectional growth studies. The advantages of this method are demonstrated by ageing individual Gorilla crania form radiographs and plotting relative dental age against length of the jaw.

Ant Colony Optimization Analysis on Overall Stability of High Arch Dam Basis of Field Monitoring

PubMed Central

Liu, Xiaoli; Chen, Hong-Xin; Kim, Jinxie

2014-01-01

A dam ant colony optimization (D-ACO) analysis of the overall stability of high arch dams on complicated foundations is presented in this paper. A modified ant colony optimization (ACO) model is proposed for obtaining dam concrete and rock mechanical parameters. A typical dam parameter feedback problem is proposed for nonlinear back-analysis numerical model based on field monitoring deformation and ACO. The basic principle of the proposed model is the establishment of the objective function of optimizing real concrete and rock mechanical parameter. The feedback analysis is then implemented with a modified ant colony algorithm. The algorithm performance is satisfactory, and the accuracy is verified. The m groups of feedback parameters, used to run a nonlinear FEM code, and the displacement and stress distribution are discussed. A feedback analysis of the deformation of the Lijiaxia arch dam and based on the modified ant colony optimization method is also conducted. By considering various material parameters obtained using different analysis methods, comparative analyses were conducted on dam displacements, stress distribution characteristics, and overall dam stability. The comparison results show that the proposal model can effectively solve for feedback multiple parameters of dam concrete and rock material and basically satisfy assessment requirements for geotechnical structural engineering discipline. PMID:25025089

Deployment of a Smart Structural Health Monitoring System for Long-Span Arch Bridges: A Review and a Case Study

PubMed Central

Chen, Zengshun; Zhou, Xiao; Wang, Xu; Dong, Lili; Qian, Yuanhao

2017-01-01

Structural health monitoring (SHM) technology for surveillance and evaluation of existing and newly built long-span bridges has been widely developed, and the significance of the technique has been recognized by many administrative authorities. The paper reviews the recent progress of the SHM technology that has been applied to long-span bridges. The deployment of a SHM system is introduced. Subsequently, the data analysis and condition assessment including techniques on modal identification, methods on signal processing, and damage identification were reviewed and summarized. A case study about a SHM system of a long-span arch bridge (the Jiubao bridge in China) was systematically incorporated in each part to advance our understanding of deployment and investigation of a SHM system for long-span arch bridges. The applications of SHM systems of long-span arch bridge were also introduced. From the illustrations, the challenges and future trends for development a SHM system were concluded. PMID:28925943

Surface characterization of nickel titanium orthodontic arch wires

PubMed Central

Krishnan, Manu; Seema, Saraswathy; Tiwari, Brijesh; Sharma, Himanshu S.; Londhe, Sanjay; Arora, Vimal

2015-01-01

Background Surface roughness of nickel titanium orthodontic arch wires poses several clinical challenges. Surface modification with aesthetic/metallic/non metallic materials is therefore a recent innovation, with clinical efficacy yet to be comprehensively evaluated. Methods One conventional and five types of surface modified nickel titanium arch wires were surface characterized with scanning electron microscopy, energy dispersive analysis, Raman spectroscopy, Atomic force microscopy and 3D profilometry. Root mean square roughness values were analyzed by one way analysis of variance and post hoc Duncan's multiple range tests. Results Study groups demonstrated considerable reduction in roughness values from conventional in a material specific pattern: Group I; conventional (578.56 nm) > Group V; Teflon (365.33 nm) > Group III; nitride (301.51 nm) > Group VI (i); rhodium (290.64 nm) > Group VI (ii); silver (252.22 nm) > Group IV; titanium (229.51 nm) > Group II; resin (158.60 nm). It also showed the defects with aesthetic (resin/Teflon) and nitride surfaces and smooth topography achieved with metals; titanium/silver/rhodium. Conclusions Resin, Teflon, titanium, silver, rhodium and nitrides were effective in decreasing surface roughness of nickel titanium arch wires albeit; certain flaws. Findings have clinical implications, considering their potential in lessening biofilm adhesion, reducing friction, improving corrosion resistance and preventing nickel leach and allergic reactions. PMID:26843749

[Quantitative evaluation of fabricating complete denture by computer numerical control in manufacturing dentition and baseplate separately plus adhesive molding].

PubMed

Wang, H; Lv, P J; Wang, Y; Sun, Y C

2016-10-18

To quantitatively evaluate the assembly precision of fabricating complete denture by computer numerical control (CNC) in manufacturing dentition and baseplate separately plus adhesive molding. The 3D surface data of a standard edentulous maxilla plaster cast model and the temporary base-plate were obtained using an Activity 880 3D scanner. The data (data1) of a complete denture were designed using a set of computer aided design (CAD) software developed by the research group of this study. The pins without undercut were designed as 3D shape of the joining area of the dentition and the baseplate by using the software of Imageware 13.2 and Geomagic Studio 2013. Zero in the top and 0.05 mm in the rest surfaces of the retention pins were set for adhesive clearance. Zenotec T1 (5-axis milling machine) was employed to manufacture polymethyl methacrylate (PMMA) dentition and baseplate. Double sides posterior and one anterior "union teeth" were got. The teeth were inserted into the retention pins in the baseplate and cemented with self-curing resin (Huge Dental Material Co., Ltd). The denture was scanned with the 3D scanner to obtain dataset Data4. Data2 and Data3 registration was set in Data4, Data2 and Data3 were united to gain Data 5. The adhesive clearance on the top of the retentional pins was measured, which was originally designed into 0 mm, and the assembly precision of dentition and baseplate obtained. The average clearance measurements between the dentition and the baseplate: left molar teeth (0.44±0.04) mm, max 0.52 mm, min 0.29 mm; right molar teeth (0.52±0.07) mm, max 0.64 mm, min 0.28 mm; anterior teeth (0.60±0.10) mm, max 0.81 mm, min 0.40 mm; total average clearance (0.52±0.10) mm. The adhesive clearance can be controlled to the level of 0.5 mm when the joining part of the artificial teeth and the base was designed into the shape of retentional pins and the artificial dentition divided into 3 parts. We succeeded in using the CAD/ computer aided manufacturing (CAM) technology to fabricate the complete denture. Although the assembly precision of the dentition and the baseplate is not perfect, the results have proved that the technical routes are workable.

Unstimulated salivary flow, pH, proteins and oral health in patients with Juvenile Idiopathic Arthritis.

PubMed

Kobus, Agnieszka; Kierklo, Anna; Zalewska, Anna; Kuźmiuk, Anna; Szajda, Sławomir Dariusz; Ławicki, Sławomir; Bagińska, Joanna

2017-06-02

There have been inconsistent conclusions regarding salivary abnormalities and their effect on oral health of Juvenile Idiopathic Arthritis (JIA) patients. The purpose of the study was to evaluate the flow rate and selected biochemical parameters of unstimulated whole saliva in correlation to oral health in JIA children. Thirty-four JIA patients and 34 age- and sex-matched controls not affected by JIA (C) were divided into two groups: with mixed and permanent dentition. DMFT/dmft, gingival and simplified oral hygiene indices were evaluated. Salivary flow rate, pH, lysozyme, lactoferrin, salivary protein concentrations and peroxidase activity were assessed. The salivary flow rate was significantly lower in the total JIA group (0.41 ml/min) as compared with the C (0.51 ml/min) and in the permanent dentition of JIA children (0.43 ml/min) as compared with the C (0.61 ml/min). A significantly lower pH was observed in total (6.74), mixed (6.7) and permanent (6.76) dentition of JIA groups in comparison to the C (7.25, 7.21, 7.28 respectively). The specific activity of peroxidase was significantly higher in JIA patients (total 112.72 IU/l, mixed dentition 112.98 IU/l, permanent dentition 112.5 IU/l) than in the C group (total 70.03 IU/l, mixed dentition 71.83 IU/l, permanent dentition 68.61 IU/l). The lysozyme concentration in JIA patients (total and permanent dentition groups) was significantly higher than in the C group. There were no significant differences in lactoferrin and salivary protein concentrations. There were no statistically significant differences in oral status between JIA patients and C, respectively: DMFT = 5.71, dmft = 3.73, OHI-S = 0.95, GI = 0.25 and DMFT 5.71, dmft = 3.73, OHI-S = 0.85, GI = 0.24. The specific activity of peroxidase in the unstimulated whole saliva was inversely correlated with the GI index, whereas the salivary lysozyme concentration was inversely correlated with the dmft index in JIA patients. In the course of JIA occur a reduction of the resting salivary flow rate and a decrease of saliva pH. In spite of this, no differences in the clinical oral status between the JIA children population and the control group were found. The mobilisation of salivary peroxidase and lysozyme contributes to the maintenance of healthy oral tissues.

Molecular identification and antibiotic resistant bacteria isolated from primary dentition infections.

PubMed

Loyola-Rodriguez, J P; Garcia-Cortes, J O; Martinez-Martinez, R E; Patiño-Marin, N; Martinez-Castañon, G A; Zavala-Alonso, N V; Amano, A

2014-12-01

Bacterial resistance to antibiotics is a health problem in many parts of the world. The aim of this study was to identify bacteria from dental infections and determine bacterial resistance to antibiotics used in dental care in the primary dentition. This cross-sectional study comprised 60 children who presented for dental treatment for active dental infections in the primary dentition. Samples from dental infections were collected and bacteria were identified by polymerase chain reaction (PCR) assay. Bacterial resistance to antibiotics was determined by colony forming units on agar plates containing amoxicillin, clindamycin and amoxillicin-clavulanic acid (A-CA) tested at 8 μg/ml or 16 μg/ml. Clindamycin in both concentrations tested (8 μg/ml and 16 μg/ml) showed the highest bacterial resistance (85.9%), followed by amoxicillin (43.7%) and A-CA (12.0%). All comparisons among the three antibiotics used in the study exhibited statistical significance (p = <0.05) in both concentrations tested (8 μg/ml and 16 μg/ml), and under aerobic and anaerobic conditions. The most prevalent resistant species identified by PCR in primary dentition infections were: Streptococcus oralis and Prevotella intermedia (75.0%); Treponema denticola and Porphyromonas gingivalis (48.3%); Streptococcus mutans (45.0%); Campylobacter rectus; and Streptococcus salivarius (40%). This study demonstrated that A-CA exhibited the lowest bacterial resistance for clinical isolates in primary dentition infections. © 2014 Australian Dental Association.

Maternal and early life factors of tooth emergence patterns and number of teeth at one and two years of age

PubMed Central

Ntani, Georgia; Day, Peter F; Baird, Janis; Godfrey, Keith M; Robinson, Sian M; Cooper, Cyrus; Inskip, Hazel M

2015-01-01

Various environmental factors have been associated with the timing of eruption of primary dentition, but the evidence to date comes from small studies with limited information on potential risk factors. We aimed to investigate associations between tooth emergence patterns and pre-conception, pregnancy and post-natal influences. Dentition patterns were recorded at ages one and two years in 2,915 children born to women in the Southampton Women’s Survey from whom information had been collected on maternal factors before conception and during pregnancy. In mutually adjusted regression models we found that: children were more dentally advanced at ages one and two years if their mothers had smoked during pregnancy or they were longer at birth; mothers of children whose dental development was advanced at age two years tended to have poorer socioeconomic circumstances, and to have reported a slower walking speed pre-pregnancy; and children of mothers of Asian ethnicity had later tooth development than those of white mothers. The findings add to the evidence of environmental impacts on the timing of the eruption of primary dentition in indicating that maternal smoking during pregnancy, socio-economic status and physical activity (assessed by reported walking speed) may influence the child’s primary dentition. Early life factors, including size at birth are also associated with dentition patterns, as is maternal ethnicity. PMID:25936832

Lack of association between ENAM gene polymorphism and dental caries in primary and permanent teeth in Czech children.

PubMed

Borilova Linhartova, Petra; Deissova, Tereza; Musilova, Kristina; Zackova, Lenka; Kukletova, Martina; Kukla, Lubomir; Izakovicova Holla, Lydie

2018-05-01

The enamelin gene (ENAM) polymorphism (rs12640848) was recently associated with dental caries in primary teeth in Polish children. The aims of the present study were to prove this association in primary dentition and to find a possible effect of this variant on caries development in permanent dentition in Czech children. This study comprised 905 Czech children. Totally, 187 children aged 2-6 years with primary dentition [78 healthy subjects (with decayed/missing/filled teeth, dmft = 0) and 109 patients with early childhood caries (ECC; dmft ≥ 1)] were included in this case-control study. In addition, 177 subjects aged 13-15 years without caries (DMFT = 0) and 541 children with dental caries (DMFT ≥ 1) in permanent dentition were selected from the ELSPAC study. Genotype determination of the ENAM polymorphism (rs12640848) was based on the TaqMan method. No significant differences in the allele or genotype frequencies between the caries-free children and those affected by dental caries were observed in both primary and permanent dentitions. Lack of association between the ENAM polymorphism (rs12640848) and dental caries in Czech children was detected. Although ENAM is considered as a candidate gene for dental caries, the presence of the ENAM variant (rs12640848) cannot be used as a risk factor of this multifactorial disease in the Czech population.

Medial Longitudinal Arch Angle Presents Significant Differences Between Foot Types: A Biplane Fluoroscopy Study.

PubMed

Balsdon, Megan E R; Bushey, Kristen M; Dombroski, Colin E; LeBel, Marie-Eve; Jenkyn, Thomas R

2016-10-01

The structure of the medial longitudinal arch (MLA) affects the foot's overall function and its ability to dissipate plantar pressure forces. Previous research on the MLA includes measuring the calcaneal-first metatarsal angle using a static sagittal plane radiograph, a dynamic height-to-length ratio using marker clusters with a multisegment foot model, and a contained angle using single point markers with a multisegment foot model. The objective of this study was to use biplane fluoroscopy to measure a contained MLA angle between foot types: pes planus (low arch), pes cavus (high arch), and normal arch. Fifteen participants completed the study, five from each foot type. Markerless fluoroscopic radiostereometric analysis (fRSA) was used with a three-dimensional model of the foot bones and manually matching those bones to a pair of two-dimensional radiographic images during midstance of gait. Statistically significant differences were found between barefoot arch angles of the normal and pes cavus foot types (p = 0.036), as well as between the pes cavus and pes planus foot types (p = 0.004). Dynamic walking also resulted in a statistically significant finding compared to the static standing trials (p = 0.014). These results support the classification of individuals following a physical assessment by a foot specialist for those with pes cavus and planus foot types. The differences between static and dynamic kinematic measurements were also supported using this novel method.

Effect of excessive body weight on foot arch changes in preschoolers a 2-year follow-up study.

PubMed

Jankowicz-Szymanska, Agnieszka; Mikolajczyk, Edyta

2015-07-01

A stable standing posture, and effective and aesthetic gait, depend heavily on correct anatomical construction of the feet, thanks to which they can play their important role. The shape and height of the foot arches are already formed in the preschool and early school years; therefore, abnormalities and disorders in children's feet, and correlations between foot formation and somatic build, are still crucial and interesting issues for orthopedists, pediatricians, physiotherapists, and podiatrists. This study deals with changes in the height of the longitudinal and transverse arches of the foot in 4- to 6-year-old children. A total of 102 boys and 105 girls took part in a 24-month study in which their body weight, height, body mass index, and Clarke's and gamma angles were measured. The analysis also focused on correlations among sex, nutritional status, and changes in foot arch height. It was discovered that sex did not considerably affect Clarke's and gamma angle values. However, it was found that between ages 4 and 6 years, the proportion of overweight and obese boys and girls increased, and the medial longitudinal arch of the foot had a tendency to collapse in those with excessive body weight. The effect of nutritional status on the transverse arch of the foot is rather dubious. In light of these findings, therapeutic programs for preventing foot deformities in children should also focus on body weight control.

ArchE - An Architecture Design Assistant

DTIC Science & Technology

2007-08-02

Architecture Design Assistant Len Bass August 2, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...ArchE - An Architecture Design Assistant 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...X, Module X 3 Author / Presenter, Date if Needed What is ArchE? ArchE is a software architecture design assistant, which: • Takes quality and

No reliable evidence to guide initial arch wire choice for fixed appliance therapy.

PubMed

Flores-Mir, Carlos

2013-12-01

The Cochrane Oral Health Group's Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), Medline and Embase databases were searched. Conference proceedings and abstracts from the British Orthodontic Conference European Orthodontic Conference and the International Association for Dental Research were also searched together with the reference lists of identified studies. Study authors were contacted for additional information. Randomised controlled trials of initial arch wire involving participants with upper and/or lower full arch fixed orthodontic appliances were included. Study selection, data extraction and risk of bias assessment were carried out independently by at least two reviewers. Nine RCTs with 571 participants were included in this review. All trials were at high risk of bias. All trials had at least one potentially confounding factor (such as bracket type, slot size, ligation method, extraction of teeth) which is likely to have influenced the outcome and was not controlled in the trial. None of the trials reported the important adverse outcome of root resorption. The comparisons were made between:Multistrand stainless steel initial arch wires compared to superelastic nickel titanium (NiTi) initial arch wires. There were four trials in this group, with different comparisons and outcomes reported at different times. No meta-analysis was possible. There is insufficient evidence from these trials to determine whether or not there is a difference in either rate of alignment or pain between stainless steel and NiTi initial arch wires.Conventional (stabilised) NiTi initial arch wires compared to superelastic NiTi initial arch wires. There were two trials in this group, one reporting the outcome of alignment over six months and the other reporting pain over one week. There is insufficient evidence from these trials to determine whether or not there is any difference between conventional (stabilised) and superelastic NiTi initial arch wires with regard to either alignment or pain.Single-strand superelastic NiTi initial arch wires compared to other NiTi (coaxial, copper NiTi (CuNiTi) or thermoelastic) initial arch wires. The three trials in this comparison each compared a different product against single-strand superelastic NiTi. There is very weak unreliable evidence, based on one very small study (n = 24) at high risk of bias, that coaxial superelastic NiTi may produce greater tooth movement over 12 weeks, but no information on associated pain or root resorption. This result should be interpreted with caution until further research evidence is available. There is insufficient evidence to determine whether or not there is a difference between either thermoelastic or CuNiTi and superelastic NiTi initial arch wires. There is no reliable evidence from the trials included in this review that any specific initial arch wire material is better or worse than another with regard to speed of alignment or pain. There is no evidence at all about the effect of initial arch wire materials on the important adverse effect of root resorption. Further well-designed and conducted, adequately-powered RCTs are required to determine whether the performance of initial arch wire materials as demonstrated in the laboratory, makes a clinically important difference to the alignment of teeth in the initial stage of orthodontic treatment in patients.

[Clinical effect of removable lingual arch plus auxiliary spring for dental arch expansion].

PubMed

Sun, Feng-yang; Zhang, Yu

2007-04-01

Observe the clinical effect of removable lingual arch plus auxiliary spring for convenient dental (especially mandibular) arch expansion. Seventeen patients with dental arch constriction complicated by mild dental crowding were enrolled in this study, including 9 requiring maxillary arch expansion and 8 necessitating mandibular expansion. The patients were divided to two groups at random for arch expansion with removable lingual arch plus auxiliary spring and with Quad-helix, respectively, and the effect of arch expansion was compared between the two groups. After 8 weeks of arch expansion, the average width of U4-U4 and U5-U5 in removable lingual arch group was enlarged by 2.2 mm and 3.0 mm, and that in Quad-helix group by 2.3 mm and 3.5 mm, respectively, showing no significant differences between the two groups (P>0.05). After 12 weeks of treatment, the average width of L4-L4 and L5-L5 in the former group was enlarged by 2.3 mm and 2.5 mm, respectively, significantly greater than that in the latter group (1.0 mm and 1.2 mm, P<0.05). Removable lingual arch plus auxiliary spring allows significant expansion of the middle segment of the dental arch (bicuspids), and can be more effective than Quad-helix for mandibular arch expansion.

Level shift two-components autoregressive conditional heteroscedasticity modelling for WTI crude oil market

NASA Astrophysics Data System (ADS)

Sin, Kuek Jia; Cheong, Chin Wen; Hooi, Tan Siow

2017-04-01

This study aims to investigate the crude oil volatility using a two components autoregressive conditional heteroscedasticity (ARCH) model with the inclusion of abrupt jump feature. The model is able to capture abrupt jumps, news impact, clustering volatility, long persistence volatility and heavy-tailed distributed error which are commonly observed in the crude oil time series. For the empirical study, we have selected the WTI crude oil index from year 2000 to 2016. The results found that by including the multiple-abrupt jumps in ARCH model, there are significant improvements of estimation evaluations as compared with the standard ARCH models. The outcomes of this study can provide useful information for risk management and portfolio analysis in the crude oil markets.

Motion planning and synchronized control of the dental arch generator of the tooth-arrangement robot.

PubMed

Jiang, Jin-Gang; Zhang, Yong-De

2013-03-01

The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.

Frontal plane multi-segment foot kinematics in high- and low-arched females during dynamic loading tasks.

PubMed

Powell, Douglas W; Long, Benjamin; Milner, Clare E; Zhang, Songning

2011-02-01

The functions of the medial longitudinal arch have been the focus of much research in recent years. Several studies have shown kinematic differences between high- and low-arched runners. No literature currently compares the inter-segmental foot motion of high- and low-arched recreational athletes. The purpose of this study was to examine inter-segmental foot motion in the frontal plane during dynamic loading activities in high- and low-arched female athletes. Inter-segmental foot motions were examined in 10 high- and 10 low-arched female recreational athletes. Subjects performed five barefooted trials in each of the following randomized movements: walking, running, downward stepping and landing. Three-dimensional kinematic data were recorded. High-arched athletes had smaller peak ankle eversion angles in walking, running and downward stepping than low-arched athletes. At the rear-midfoot joint high-arched athletes reached peak eversion later in walking and downward stepping than the low-arched athletes. The high-arched athletes had smaller peak mid-forefoot eversion angles in walking, running and downward stepping than the low-arched athletes. The current findings show that differences in foot kinematics between the high- and low-arched athletes were in position and not range of motion within the foot. Copyright © 2010 Elsevier B.V. All rights reserved.

[Dental arch form reverting by four-point method].

PubMed

Pan, Xiao-Gang; Qian, Yu-Fen; Weng, Si-En; Feng, Qi-Ping; Yu, Quan

2008-04-01

To explore a simple method of reverting individual dental arch form template for wire bending. Individual dental arch form was reverted by four-point method. By defining central point of bracket on bilateral lower second premolar and first molar, certain individual dental arch form could be generated. The arch form generating procedure was then be developed to computer software for printing arch form. Four-point method arch form was evaluated by comparing with direct model measurement on linear and angular parameters. The accuracy and reproducibility were assessed by paired t test and concordance correlation coefficient with Medcalc 9.3 software package. The arch form by four-point method was of good accuracy and reproducibility (linear concordance correlation coefficient was 0.9909 and angular concordance correlation coefficient was 0.8419). The dental arch form reverted by four-point method could reproduce the individual dental arch form.

Presurgical cleft lip anthropometrics and dental arch relationships in patients with complete unilateral cleft lip and palate.

PubMed

Antonarakis, Gregory S; Adibfar, Alex; Tompson, Bryan D; Paedo, D; Daskalogiannakis, John; Fisher, David M

2015-05-01

To investigate associations between anthropometric lip measurements and dental arch relationships in patients with complete unilateral cleft lip and palate (CUCLP). Retrospective cross-sectional study. Children with CUCLP. Anthropometric lip measurements, made immediately prior to lip repair, were available for each patient. The dental arch relationships were evaluated on dental study casts (8.6 ± 0.9 years) taken prior to any orthodontic treatment and prior to alveolar bone graft, using the modified Huddart and Bodenham (MHB) scoring system. The presence of associations between anthropometric lip measurements and dental arch relationships was determined using linear regression analysis. In the 63 patients included in the study, the cleft lateral lip element was deficient in height in 87% and in transverse width in 86% of patients. Patients with more deficient cleft-side lateral lip height were more likely to present with more negative MHB scores (r = .443; P < .001). Conversely, patients with more deficient cleft-side lateral lip transverse width more often presented with more positive MHB scores (r = .281; P = .025). In patients with CUCLP, there is a wide variability in the degree of deficiency of the cleft-side lateral lip element, both in the vertical and in the transverse dimension. The extent of this deficiency may, in part, predict the resulting dental arch relationships.

Dynamics of snapping beams and jumping poppers

NASA Astrophysics Data System (ADS)

Pandey, A.; Moulton, D. E.; Vella, D.; Holmes, D. P.

2014-01-01

We consider the dynamic snapping instability of elastic beams and shells. Using the Kirchhoff rod and Föppl-von Kármán plate equations, we study the stability, deformation modes, and snap-through dynamics of an elastic arch with clamped boundaries and subject to a concentrated load. For parameters typical of everyday and technological applications of snapping, we show that the stretchability of the arch plays a critical role in determining not only the post-buckling mode of deformation but also the timescale of snapping and the frequency of the arch's vibrations about its final equilibrium state. We show that the growth rate of the snap-through instability and its subsequent ringing frequency can both be interpreted physically as the result of a sound wave in the material propagating over a distance comparable to the length of the arch. Finally, we extend our analysis of the ringing frequency of indented arches to understand the “pop” heard when everted shell structures snap-through to their stable state. Remarkably, we find that not only are the scaling laws for the ringing frequencies in these two scenarios identical but also the respective prefactors are numerically close; this allows us to develop a master curve for the frequency of ringing in snapping beams and shells.

Panoramic radiographic predictors of mandibular third molar eruption.

PubMed

Niedzielska, Iwona Anna; Drugacz, Jan; Kus, Nina; Kreska, Joanna

2006-08-01

Third molar (M3) eruption can be problematic. According to some orthodontic surgeons, the teeth are capable of aggravating the average crowding level in the dental arch. The question is whether it might be possible to give a prognosis for ultimate M3 position in the arch and make an early decision to extract or retain them. The purpose of the study was to determine which measurements made on panoramic tomograms might facilitate prognosis for M3 position in the dental arch over the years. The investigation involved 64 patients who had been enrolled to the study group 10 years earlier, ie, in 1993, when an analysis had been carried out regarding M3 effect on dental arch crowding. At that time panoramic tomograms had been taken, and dental casts made. The procedures were repeated in 2003. The following measurements were taken at baseline (1993) and at the end of the study (2003): (1)/the retromolar space to lower third molar crown width, (2) third molar angulation to the base of the mandible, and (3) third molar to second molar inclination. At some defined values of the Ganss ratio, and M3 inclination to mandibular base and second molar, it is possible to predict potential lower third molar alignment in the dental arch using a panoramic radiograph.

3-dimensional orthodontics visualization system with dental study models and orthopantomograms

NASA Astrophysics Data System (ADS)

Zhang, Hua; Ong, S. H.; Foong, K. W. C.; Dhar, T.

2005-04-01

The aim of this study is to develop a system that provides 3-dimensional visualization of orthodontic treatments. Dental plaster models and corresponding orthopantomogram (dental panoramic tomogram) are first digitized and fed into the system. A semi-auto segmentation technique is applied to the plaster models to detect the dental arches, tooth interstices and gum margins, which are used to extract individual crown models. 3-dimensional representation of roots, generated by deforming generic tooth models with orthopantomogram using radial basis functions, is attached to corresponding crowns to enable visualization of complete teeth. An optional algorithm to close the gaps between deformed roots and actual crowns by using multi-quadratic radial basis functions is also presented, which is capable of generating smooth mesh representation of complete 3-dimensional teeth. User interface is carefully designed to achieve a flexible system with as much user friendliness as possible. Manual calibration and correction is possible throughout the data processing steps to compensate occasional misbehaviors of automatic procedures. By allowing the users to move and re-arrange individual teeth (with their roots) on a full dentition, this orthodontic visualization system provides an easy and accurate way of simulation and planning of orthodontic treatment. Its capability of presenting 3-dimensional root information with only study models and orthopantomogram is especially useful for patients who do not undergo CT scanning, which is not a routine procedure in most orthodontic cases.

Early headgear effects on the eruption pattern of the maxillary canines.

PubMed

Silvola, Anna-Sofia; Arvonen, Päivi; Julku, Johanna; Lähdesmäki, Raija; Kantomaa, Tuomo; Pirttiniemi, Pertti

2009-05-01

To test the null hypothesis that early headgear (HG) treatment has no effect on the eruption pattern of the maxillary canines in the early mixed dentition. Sixty-eight children (40 boys and 28 girls) with a Class II tendency in occlusion and moderate crowding of the dental arches were randomized into two groups. HG treatment was initiated immediately in the first group. In the second group only minor interceptive procedures were performed during the first follow-up period of 2 years. Orthopantomograms were taken at the baseline, three times at 1-year intervals, and after growth at the age of 16. Eruption geometry was performed. The space from the maxillary first molar to the lateral incisor was measured on the dental casts. The inclination of the maxillary canine in relation to the midline appeared to be significantly more vertically oriented on the right side in the HG group 1 and 2 years after starting the HG therapy (P = .0098 and P = .0003, respectively). The inclination in relation to the lateral incisors was smaller in the HG group bilaterally after 1 year and 2 years of HG treatment, and on the right side after 3 years of treatment. The hypothesis is rejected. Early HG treatment significantly affects the inclination of the maxillary canine during eruption. The strongest influence was seen after 2 years of HG use, more prominently in the right-side canine.

Second molar impaction associated with lip bumper therapy

PubMed Central

Jacob, Helder Baldi; LeMert, Shawn; Alexander, Richard G.; Buschang, Peter H.

2014-01-01

INTRODUCTION: Although lip bumpers (LBs) provide significant clinical gain of mandibular arch perimeter in mixed-dentition patients, orthodontists are reluctant to use them due to the possibility of permanent second molar eruptive disturbances. OBJECTIVE: The present study was conducted to assess second molar impaction associated with the use of LBs, and to investigate how they can be solved. MATERIAL AND METHODS: Lateral and panoramic radiographs of 67 patients (34 females and 33 males) were assessed prior (T1) and post-LB treatment (T2). LB therapy lasted for approximately 1.8 ± 0.9 years. Concomitant rapid palatal expansion (RPE) was performed in the maxilla at LB treatment onset. Impaction of mandibular second molars was assessed by means of panoramic radiographs in relation to the position of first mandibular molars. Horizontal and vertical movements of first and second molars were assessed cephalometrically on lateral cephalometric radiographs based on mandibular superimpositions. RESULTS: Eight (11.9%) patients had impacted second molars at the end of LB therapy. Two patients required surgical correction, whereas five required spacers and one patient was self-corrected. Mandibular first molar tip and apex migrated forward 1.3 mm and 2.3 mm, respectively. Second molar tip showed no statistically significant horizontal movement. CONCLUSION: Although LB therapy increased the risk of second molar impaction, impactions were, in most instances, easily solved. PMID:25628086

A Danish family with dominant deafness-onychodystrophy syndrome.

PubMed

Vind-Kezunovic, Dina; Torring, Pernille M

2013-01-01

The rare hereditary disorder "dominant deafness and onychodystrophy (DDOD) syndrome" (OMIM 124480) has been described in a few case reports. No putative DDOD gene or locus has been mapped and the cause of the disorder remains unknown. We present here three male family members in three generations with sensori-neural deafness, onychodystrophy and brachydactyly inherited via autosomal dominant transmission. The family members presented with absent fingernails on the first and fifth digits. As to the feet, there were absent nails on second to fifth toes in two family members, whereas the third family member only had absent nails on the fifth toe. The proband had late dentition and his father a history of late dentition, but otherwise the teeth appeared normal. Comparative genomic hybridization array analysis (Agilent 400k oligoarray) of the proband did not detect any copy number variation. This Danish family fits within the spectrum of dominant deafness and onychodystrophy syndrome and further characterises this rare disorder.

The Effects of Maxillary Protraction with or without Rapid Maxillary Expansion and Age Factors in Treating Class III Malocclusion: A Meta-Analysis

PubMed Central

Zhang, Wei; Qu, Hong-Chen; Yu, Mo; Zhang, Yang

2015-01-01

We conducted a comprehensive meta-analysis of 12 studies to examine whether maxillary protraction face mask associated with rapid maxillary expansion (FM/RME) could be an effective treatment for Class III malocclusion and to evaluate the effect of timing on treatment response. Patients with a maxillary deficiency who were treated with FM with or without RME were compared with those who had an untreated Class III malocclusion. In both treatment groups, forward displacement of the maxilla and skeletal changes were found to be statistically significant. In addition, posterior rotation of the mandible and increased facial height were more evident in the FM group compared with the control group. However, no significant differences were observed between the early treatment groups and late treatment groups. The results indicated that both FM/RME and FM therapy produced favorable skeletal changes for correcting anterior crossbite, and the curative time was not affected by the presence of deciduous teeth, early mixed dentition or late mixed dentition in the patient. PMID:26068221

Dentition of the apron ray Discopyge tschudii (Elasmobranchii: Narcinidae).

PubMed

Spath, M C; Deli Antoni, M; Delpiani, G

2017-10-01

The present study provides quantitative and qualitative analyses of the dentition of Discopyge tschudii. Overall, 193 individuals (99 males and 94 females) of D. tschudii were collected on scientific trawl surveys conducted by the National Institute for Fisheries Research and Development (INIDEP) and commercial vessels in Argentina. Discopyge tschudii has rhombic-shaped teeth, arranged in a semipavement-like dentition; each tooth has an erect cusp slightly inclined posteriorly and holaulachorized root. Mature males have greater tooth lengths than females and immature specimens. Discopyge tschudii exhibits dignathic homodonty and gradient monognathic heterodonty where teeth of the commissural row are shorter than those of the symphyseal and internal rows. © 2017 The Fisheries Society of the British Isles.

[Recognizing and preventing disturbances in eruption].

PubMed

van der Linden, F P G M

2014-04-01

Disturbances in eruption and related problems are quite common in permanent dentition but rare in deciduous dentition. For the timely recognition of disturbances in eruption, knowledge of the normal development of dentition is essential. Disturbances in eruption comprise disturbances in which eruption does not occur at all, in which it is delayed or incomplete, or in which the normal direction of eruption is influenced. If identified early enough, many undesirable dental conditions can be avoided or their seriousness can be limited. A possible impacting of permanent cuspids, for example, can be avoided by extracting the deciduous cuspids at the right moment; in cases of a large overjet or the threat of a cover-bite, lip interference can be prevented.

Retrograde and antegrade cerebral perfusion: results in short elective arch reconstructive times.

PubMed

Milewski, Rita Karianna; Pacini, Davide; Moser, G William; Moeller, Patrick; Cowie, Doreen; Szeto, Wilson Y; Woo, Y Joseph; Desai, Nimesh; Di Marco, Luca; Pochettino, Alberto; Di Bartolomeo, Roberto; Bavaria, Joseph E

2010-05-01

Debate remains regarding optimal cerebral circulatory management during relatively noncomplex, short arch reconstructive times. Both retrograde cerebral perfusion with deep hypothermic circulatory arrest (RCP/DHCA) and antegrade cerebral perfusion with moderate hypothermic circulatory arrest (ACP/MHCA) have emerged as established techniques. The aim of the study was to evaluate perioperative outcomes between antegrade and retrograde cerebral perfusion techniques for elective arch reconstruction times less than 45 minutes. Between 1997 and September 2008, 776 cases from two institutions were reviewed to compare RCP/DHCA and ACP/MHCA perfusion techniques. At the University of Pennsylvania, 682 were treated utilizing RCP/DHCA cerebral protection. At the University of Bologna, 94 were treated with ACP/MHCA and bilateral cerebral perfusion. Mean cerebral ischemic time and visceral ischemic time differed between RCP/DHCA and ACP/MHCA (p < 0.001). Multivariate analysis showed age more than 65 years, atherosclerotic aneurysm, and cross-clamp time as predictors of the composite endpoint of mortality, neurologic event, and acute myocardial infarction. There was no significant difference in permanent neurologic deficit, temporary neurologic dysfunction, or renal failure, between RCP/DHCA and ACP/MHCA. Mortality was comparable across both techniques. Both RCP/DHCA and ACP/MHCA have emerged as effective techniques for selected aortic arch operations with low morbidity and mortality. Univariate analysis revealed no statistically significant differences in primary or secondary outcomes between techniques for aortic reconstruction times less than 45 minutes. Data from this study demonstrate that selective use of either RCP/DHCA or ACP/MHCA provides excellent cerebral and visceral outcomes for elective open aortic surgery with short arch reconstructive times. Copyright (c) 2010 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Subject-Specific Finite Element Analysis of the Carpal Tunnel Cross-Sectional to Examine Tunnel Area Changes in Response to Carpal Arch Loading

PubMed Central

Walia, Piyush; Erdemir, Ahmet; Li, Zong-Ming

2017-01-01

Background Manipulating the carpal arch width (i.e. distance between hamate and trapezium bones) has been suggested as a means to increase carpal tunnel cross-sectional area and alleviate median nerve compression. The purpose of this study was to develop a finite element model of the carpal tunnel and to determine an optimal force direction to maximize area. Methods A planar geometric model of carpal bones at hamate level was reconstructed from MRI with inter-carpal joint spaces filled with a linear elastic surrogate tissue. Experimental data with discrete carpal tunnel pressures (50, 100, 150, and 200 mmHg) and corresponding carpal bone movements were used to obtain material property of surrogate tissue by inverse finite element analysis. The resulting model was used to simulate changes of carpal arch widths and areas with directional variations of a unit force applied at the hook of hamate. Findings Inverse finite element model predicted the experimental area data within 1.5% error. Simulation of force applications showed that carpal arch width and area were dependent on the direction of force application, and minimal arch width and maximal area occurred at 138° (i.e. volar-radial direction) with respect to the hamate-to-trapezium axis. At this force direction, the width changed to 24.4 mm from its initial 25.1 mm (3% decrease), and the area changed to 301.6 mm2 from 290.3 mm2 (4% increase). Interpretation The findings of the current study guide biomechanical manipulation to gain tunnel area increase, potentially helping reduce carpal tunnel pressure and relieve symptoms of compression median neuropathy. PMID:28073093

Correlation between permanent tooth eruption pattern and the predominance of the motor function laterality

PubMed Central

Veloso-Durán, Ana; Vazquez-Salceda, Carmen M.; López-Jiménez, Julian; Veloso-Durán, Margarita

2014-01-01

Objectives: To asses whether dental eruption order can play a role in the early diagnosis of crossed laterality. Study Design: Dental eruption pattern along with eye, ear, hand and foot lateralism were examined on 131 children between 6 to 8 years old from public schools from a multietnic population area of Barcelona city. Statistic methods (Statgraphics Plus 5.1 program) were used to evaluate data recollected. Results: Only foot and dentition lateralities behave as independent variables regarding hand laterality. So dental eruption laterality (along with the foot one) would be one of the parameters more related to hand laterality given that dentition variable relationship is greater that the foot one. This suggests that tooth eruption could be more clinically relevant. Crossed laterality hand-foot is significantly more predominant in men (13%) than in women (1,6%). Meanwhile, the relationship between hand and dentition didn’t show any influence of sex. Conclusions: Dental eruption order, can be used as a good parameter in the determination of the patient’s laterality. Key words:Dentition, dental eruption, motor laterality, crossed laterality. PMID:24608220

A Comparative Evaluation between Cheiloscopic Patterns and Terminal Planes in Primary Dentition.

PubMed

Vignesh, R; Rekha, C Vishnu; Annamalai, Sankar; Norouzi, Parisa; Sharmin, Ditto

2017-01-01

To assess the correlation between different cheiloscopic patterns with the terminal planes in deciduous dentition. Three hundred children who are 3-6 years old with complete primary dentition were recruited, and the pattern of molar terminal plane was recorded in the pro forma. Lip prints of these children were recorded with lipstick-cellophane method, and the middle 10 mm of lower lip was analyzed for the lip print pattern as suggested by Sivapathasundharam et al . The pattern was classified based on Tsuchihashi and Suzuki classification. Type II (branched) pattern was the most predominant cheiloscopic pattern. The predominant patterns which related to the terminal planes were as follows: Type IV (reticular) and Type V (irregular) pattern for mesial step, Type IV (reticular) pattern for distal step, and Type I (complete vertical) pattern for flush terminal plane. No significant relationship was obtained on gender comparison. Lip prints can provide an alternative to dermatoglyphics to predict the terminal plane in primary dentition. Further studies with larger sample size are required to provide an insight into its significant correlations.

A Comparative Evaluation between Cheiloscopic Patterns and Terminal Planes in Primary Dentition

PubMed Central

Vignesh, R; Rekha, C Vishnu; Annamalai, Sankar; Norouzi, Parisa; Sharmin, Ditto

2017-01-01

Objective: To assess the correlation between different cheiloscopic patterns with the terminal planes in deciduous dentition. Materials and Methods: Three hundred children who are 3–6 years old with complete primary dentition were recruited, and the pattern of molar terminal plane was recorded in the pro forma. Lip prints of these children were recorded with lipstick-cellophane method, and the middle 10 mm of lower lip was analyzed for the lip print pattern as suggested by Sivapathasundharam et al. The pattern was classified based on Tsuchihashi and Suzuki classification. Results: Type II (branched) pattern was the most predominant cheiloscopic pattern. The predominant patterns which related to the terminal planes were as follows: Type IV (reticular) and Type V (irregular) pattern for mesial step, Type IV (reticular) pattern for distal step, and Type I (complete vertical) pattern for flush terminal plane. No significant relationship was obtained on gender comparison. Conclusion: Lip prints can provide an alternative to dermatoglyphics to predict the terminal plane in primary dentition. Further studies with larger sample size are required to provide an insight into its significant correlations. PMID:29326500

Royal London space analysis: plaster versus digital model assessment.

PubMed

Grewal, Balpreet; Lee, Robert T; Zou, Lifong; Johal, Ama

2017-06-01

With the advent of digital study models, the importance of being able to evaluate space requirements becomes valuable to treatment planning and the justification for any required extraction pattern. This study was undertaken to compare the validity and reliability of the Royal London space analysis (RLSA) undertaken on plaster as compared with digital models. A pilot study (n = 5) was undertaken on plaster and digital models to evaluate the feasibility of digital space planning. This also helped to determine the sample size calculation and as a result, 30 sets of study models with specified inclusion criteria were selected. All five components of the RLSA, namely: crowding; depth of occlusal curve; arch expansion/contraction; incisor antero-posterior advancement and inclination (assessed from the pre-treatment lateral cephalogram) were accounted for in relation to both model types. The plaster models served as the gold standard. Intra-operator measurement error (reliability) was evaluated along with a direct comparison of the measured digital values (validity) with the plaster models. The measurement error or coefficient of repeatability was comparable for plaster and digital space analyses and ranged from 0.66 to 0.95mm. No difference was found between the space analysis performed in either the upper or lower dental arch. Hence, the null hypothesis was accepted. The digital model measurements were consistently larger, albeit by a relatively small amount, than the plaster models (0.35mm upper arch and 0.32mm lower arch). No difference was detected in the RLSA when performed using either plaster or digital models. Thus, digital space analysis provides a valid and reproducible alternative method in the new era of digital records. © The Author 2016. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

Genome-wide association studies of pit-and-fissure- and smooth-surface caries in permanent dentition.

PubMed

Zeng, Z; Shaffer, J R; Wang, X; Feingold, E; Weeks, D E; Lee, M; Cuenco, K T; Wendell, S K; Weyant, R J; Crout, R; McNeil, D W; Marazita, M L

2013-05-01

While genetics clearly influences dental caries risk, few caries genes have been discovered and validated. Recent studies have suggested differential genetic factors for primary dentition caries and permanent dentition caries, as well as for pit-and-fissure- (PF) and smooth- (SM) surface caries. We performed separate GWAS for caries in permanent-dentition PF surfaces (1,017 participants, adjusted for age, sex, and the presence of Streptococcus mutans) and SM surfaces (1,004 participants, adjusted for age, education group, and the presence of Streptococcus mutans) in self-reported whites (ages 14 to 56 yrs). Caries scores were derived based on visual assessment of each surface of each tooth; more than 1.2 million SNPs were either successfully genotyped or imputed and were tested for association. Two homologous genes were suggestively associated: BCOR (Xp11.4) in PF-surface caries (p value = 1.8E-7), and BCORL1 (Xq26.1) in SM-surface caries (p value = 1.0E-5). BCOR mutations cause oculofaciocardiodental syndrome, a Mendelian disease involving multiple dental anomalies. Associations of other plausible cariogenesis genes were also observed for PF-surface caries (e.g., INHBA, p value = 6.5E-6) and for SM-surface caries (e.g., CXCR1 and CXCR2, p value = 1.9E-6). This study supports the notion that genes differentially affect cariogenesis across the surfaces of the permanent dentition, and nominates several novel genes for investigation.

Genome-wide Association Studies of Pit-and-Fissure- and Smooth-surface Caries in Permanent Dentition

PubMed Central

Zeng, Z.; Shaffer, J.R.; Wang, X.; Feingold, E.; Weeks, D.E.; Lee, M.; Cuenco, K.T.; Wendell, S.K.; Weyant, R.J.; Crout, R.; McNeil, D.W.; Marazita, M.L.

2013-01-01

While genetics clearly influences dental caries risk, few caries genes have been discovered and validated. Recent studies have suggested differential genetic factors for primary dentition caries and permanent dentition caries, as well as for pit-and-fissure- (PF) and smooth- (SM) surface caries. We performed separate GWAS for caries in permanent-dentition PF surfaces (1,017 participants, adjusted for age, sex, and the presence of Streptococcus mutans) and SM surfaces (1,004 participants, adjusted for age, education group, and the presence of Streptococcus mutans) in self-reported whites (ages 14 to 56 yrs). Caries scores were derived based on visual assessment of each surface of each tooth; more than 1.2 million SNPs were either successfully genotyped or imputed and were tested for association. Two homologous genes were suggestively associated: BCOR (Xp11.4) in PF-surface caries (p value = 1.8E-7), and BCORL1 (Xq26.1) in SM-surface caries (p value = 1.0E-5). BCOR mutations cause oculofaciocardiodental syndrome, a Mendelian disease involving multiple dental anomalies. Associations of other plausible cariogenesis genes were also observed for PF-surface caries (e.g., INHBA, p value = 6.5E-6) and for SM-surface caries (e.g., CXCR1 and CXCR2, p value = 1.9E-6). This study supports the notion that genes differentially affect cariogenesis across the surfaces of the permanent dentition, and nominates several novel genes for investigation. PMID:23470693

Analysis of intra-arch and interarch measurements from digital models with 2 impression materials and a modeling process based on cone-beam computed tomography.

PubMed

White, Aaron J; Fallis, Drew W; Vandewalle, Kraig S

2010-04-01

Study models are an essential part of an orthodontic record. Digital models are now available. One option for generating a digital model is cone-beam computed tomography (CBCT) scanning of orthodontic impressions and bite registrations. However, the accuracy of digital measurements from models generated by this method has yet to be thoroughly evaluated. A plastic typodont was modified with reference points for standardized intra-arch and interarch measurements, and 16 sets of maxillary and mandibular vinylpolysiloxane and alginate impressions were made. A copper wax-bite registration was made with the typodont in maximum intercuspal position to accompany each set of impressions. The impressions were shipped to OrthoProofUSA (Albuquerque, NM), where digital orthodontic models were generated via CBCT. Intra-arch and interarch measurements were made directly on the typodont with electronic digital calipers and on the digital models by using OrthoProofUSA's proprietary DigiModel software. Percentage differences from the typodont of all intra-arch measurements in the alginate and vinylpolysiloxane groups were low, from 0.1% to 0.7%. Statistical analysis of the intra-arch percentage differences from the typodont of the alginate and vinylpolysiloxane groups had a statistically significant difference between the groups only for maxillary intermolar width. However, because of the small percentage differences, this was not considered clinically significant for orthodontic measurements. Percentage differences from the typodont of all interarch measurements in the alginate and vinylpolysiloxane groups were much higher, from 3.3% to 10.7%. Statistical analysis of the interarch percentage differences from the typodont of the alginate and vinylpolysiloxane groups showed statistically significant differences between the groups in both the maxillary right canine to mandibular right canine (alginate with a lower percentage difference than vinylpolysiloxane) and the maxillary left second molar to mandibular left second molar (alginate with a greater percentage difference than vinylpolysiloxane) segments. This difference, ranging from 0.24 to 0.72 mm, is clinically significant. In this study, digital orthodontic models from CBCT scans of alginate and vinylpolysiloxane impressions provided a dimensionally accurate representation of intra-arch relationships for orthodontic evaluation. However, the use of copper wax-bite registrations in this CBCT-based process did not result in an accurate digital representation of interarch relationships. Copyright (c) 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Runner's knowledge of their foot type: do they really know?

PubMed

Hohmann, Erik; Reaburn, Peter; Imhoff, Andreas

2012-09-01

The use of correct individually selected running shoes may reduce the incidence of running injuries. However, the runner needs to be aware of their foot anatomy to ensure the "correct" footwear is chosen. The purpose of this study was to compare the individual runner's knowledge of their arch type to the arch index derived from a static footprint. We examined 92 recreational runners with a mean age of 35.4±11.4 (12-63) years. A questionnaire was used to investigate the knowledge of the runners about arch height and overpronation. A clinical examination was undertaken using defined criteria and the arch index was analysed using weight-bearing footprints. Forty-five runners (49%) identified their foot arch correctly. Eighteen of the 41 flat-arched runners (44%) identified their arch correctly. Twenty-four of the 48 normal-arched athletes (50%) identified their arch correctly. Three subjects with a high arch identified their arch correctly. Thirty-eight runners assessed themselves as overpronators; only four (11%) of these athletes were positively identified. Of the 34 athletes who did not categorize themselves as overpronators, four runners (12%) had clinical overpronation. The findings of this research suggest that runners possess poor knowledge of both their foot arch and dynamic pronation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sequences and timing of dental eruption in semi-free-ranging mandrills (Mandrillus sphinx).

PubMed

Setchell, Joanna M; Wickings, E Jean

2004-01-01

The chronology of tooth emergence is often used to examine the growth and development of individuals and to compare life histories across species. Emergence patterns are also used to age animals and to infer life history influences for extinct species. However, comparative studies of primates are hindered by a lack of dental development data for many species. Here we describe the sequences and timing of tooth emergence for a large sample of semi-free-ranging mandrills (Mandrillus sphinx) and compare this with other life history variables for this species. Deciduous dentition emerged in the sequence i1 i2 c p3 p4. The augmented sequence (including information about variability in emergence sequence) was i1 i2 [c p3] p4 for the female maxilla and the male mandible, and i1 i2 c p3 p4 for the female mandible and the male maxilla. Deciduous dentition was complete by 5.0 months in females and 6.4 months in males. The permanent dentition began to emerge at 26 months, and complete adult dentition had emerged by 68 months for males and 85 months for females. Sex differences occurred in the augmented eruption sequences: females M1 I1 I2 [M2 C] P3 P4 M3, males M1 I1 [I2 M2] [P4 = P3 = C] M3. The order of tooth eruption and the occurrence of sequence polymorphisms were very similar to those observed for baboons and macaques. Comparison with life history variables showed that mandrills have complete deciduous dentition at weaning, females possess both adult incisors and M1 when they first reproduce, but still have deciduous canines and premolars, and that both sexes have full adult dentition before they attain their full adult stature and mass.

A geometric reappraisal of proximal landing zones for thoracic endovascular aortic repair according to aortic arch types.

PubMed

Marrocco-Trischitta, Massimiliano M; de Beaufort, Hector W; Secchi, Francesco; van Bakel, Theodorus M; Ranucci, Marco; van Herwaarden, Joost A; Moll, Frans L; Trimarchi, Santi

2017-06-01

This study assessed whether the additional use of the aortic arch classification in type I, II, and III may complement Ishimaru's aortic arch map and provide valuable information on the geometry and suitability of proximal landing zones for thoracic endovascular aortic repair. Anonymized thoracic computed tomography scans of healthy aortas were reviewed and stratified according to the aortic arch classification, and 20 of each type of arch were selected. Further processing allowed calculation of angulation and tortuosity of each proximal landing zone. Data were described indicating both proximal landing zone and type of arch (eg, 0/I). Angulation was severe (>60°) in 2/III and in 3/III. Comparisons among the types of arch showed an increase in proximal landing zones angulation (P < .001) and tortuosity (P = .009) depending on the type of arch. Comparisons within type of arch showed no change in angulation and tortuosity across proximal landing zones within type I arch (P = .349 and P = .409), and increases in angulation and tortuosity toward more distal proximal landing zones within type II (P = .003 and P = .043) and type III (P < .001 in both). The aortic arch classification is associated with a consistent geometric pattern of the aortic arch map, which identifies specific proximal landing zones with suboptimal angulation for stent graft deployment. Arches II and III also appear to have progressively less favorable anatomy for thoracic endovascular aortic repair compared with arch I. Copyright © 2016 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Expression of sall4 in taste buds of zebrafish.

PubMed

Jackson, Robyn; Braubach, Oliver R; Bilkey, Jessica; Zhang, Jing; Akimenko, Marie-Andrée; Fine, Alan; Croll, Roger P; Jonz, Michael G

2013-07-01

We characterized the expression of sall4, a gene encoding a zinc finger transcription factor involved in the maintenance of embryonic stem cells, in taste buds of zebrafish (Danio rerio). Using an enhancer trap line (ET5), we detected enhanced green fluorescent protein (EGFP) in developing and adult transgenic zebrafish in regions containing taste buds: the lips, branchial arches, and the nasal and maxillary barbels. Localization of EGFP to taste cells of the branchial arches and lips was confirmed by co-immunolabeling with antibodies against calretinin and serotonin, and a zebrafish-derived neuronal marker (zn-12). Transgenic insertion of the ET construct into the zebrafish genome was evaluated and mapped to chromosome 23 in proximity (i.e. 23 kb) to the sall4 gene. In situ hybridization and expression analysis between 24 and 96 h post-fertilization (hpf) demonstrated that transgenic egfp expression in ET5 zebrafish was correlated with the spatial and temporal pattern of expression of sall4 in the wild-type. Expression was first observed in the central nervous system and branchial arches at 24 hpf. At 48 hpf, sall4 and egfp expression was observed in taste bud primordia surrounding the mouth and branchial arches. At 72 and 96 hpf, expression was detected in the upper and lower lips and branchial arches. Double fluorescence in situ hybridization at 3 and 10 dpf confirmed colocalization of sall4 and egfp in the lips and branchial arches. These studies reveal sall4 expression in chemosensory cells and implicate this transcription factor in the development and renewal of taste epithelia in zebrafish. Copyright © 2013 Wiley Periodicals, Inc.

Generation and evaluation of 3D digital casts of maxillary defects based on multisource data registration: A pilot clinical study.

PubMed

Ye, Hongqiang; Ma, Qijun; Hou, Yuezhong; Li, Man; Zhou, Yongsheng

2017-12-01

Digital techniques are not clinically applied for 1-piece maxillary prostheses containing an obturator and removable partial denture retained by the remaining teeth because of the difficulty in obtaining sufficiently accurate 3-dimensional (3D) images. The purpose of this pilot clinical study was to generate 3D digital casts of maxillary defects, including the defective region and the maxillary dentition, based on multisource data registration and to evaluate their effectiveness. Twelve participants with maxillary defects were selected. The maxillofacial region was scanned with spiral computer tomography (CT), and the maxillary arch and palate were scanned using an intraoral optical scanner. The 3D images from the CT and intraoral scanner were registered and merged to form a 3D digital cast of the maxillary defect containing the anatomic structures needed for the maxillary prosthesis. This included the defect cavity, maxillary dentition, and palate. Traditional silicone impressions were also made, and stone casts were poured. The accuracy of the digital cast in comparison with that of the stone cast was evaluated by measuring the distance between 4 anatomic landmarks. Differences and consistencies were assessed using paired Student t tests and the intraclass correlation coefficient (ICC). In 3 participants, physical resin casts were produced by rapid prototyping from digital casts. Based on the resin casts, maxillary prostheses were fabricated by using conventional methods and then evaluated in the participants to assess the clinical applicability of the digital casts. Digital casts of the maxillary defects were generated and contained all the anatomic details needed for the maxillary prosthesis. Comparing the digital and stone casts, a paired Student t test indicated that differences in the linear distances between landmarks were not statistically significant (P>.05). High ICC values (0.977 to 0.998) for the interlandmark distances further indicated the high degree of consistency between the digital and stone casts. The maxillary prostheses showed good clinical effectiveness, indicating that the corresponding digital casts met the requirements for clinical application. Based on multisource data from spiral CT and the intraoral scanner, 3D digital casts of maxillary defects were generated using the registration technique. These casts were consistent with conventional stone casts in terms of accuracy and were suitable for clinical use. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Initial arch wires for tooth alignment during orthodontic treatment with fixed appliances.

PubMed

Jian, Fan; Lai, Wenli; Furness, Susan; McIntyre, Grant T; Millett, Declan T; Hickman, Joy; Wang, Yan

2013-04-30

Initial arch wires are the first arch wires to be inserted into the fixed appliance at the beginning of orthodontic treatment and are used mainly for the alignment of teeth by correcting crowding and rotations. With a number of different types of orthodontic arch wires available for initial tooth alignment, it is important to understand which wire is most efficient, as well as which wires cause the least amount of root resorption and pain during the initial aligning stage of treatment. This is an update of the review 'Initial arch wires for alignment of crooked teeth with fixed orthodontic braces' first published in the Cochrane Database of Systematic Reviews 2010, Issue 4. To assess the effects of initial arch wires for alignment of teeth with fixed orthodontic braces in relation to alignment speed, root resorption and pain intensity. We searched the following electronic databases: the Cochrane Oral Health Group's Trials Register (to 2 August 2012), CENTRAL (The Cochrane Library 2012, Issue 7), MEDLINE via OVID (1950 to 2 August 2012) and EMBASE via OVID (1980 to 2 August 2012). We also searched the reference lists of relevant articles. There was no restriction with regard to publication status or language of publication. We contacted all authors of included studies to identify additional studies. We included randomised controlled trials (RCTs) of initial arch wires to align teeth with fixed orthodontic braces. Only studies involving participants with upper and/or lower full arch fixed orthodontic appliances were included. Two review authors were responsible for study selection, validity assessment and data extraction. All disagreements were resolved by discussion amongst the review team. Corresponding authors of included studies were contacted to obtain missing information. Nine RCTs with 571 participants were included in this review. All trials were at high risk of bias and a number of methodological limitations were identified. All trials had at least one potentially confounding factor (such as bracket type, slot size, ligation method, extraction of teeth) which is likely to have influenced the outcome and was not controlled in the trial. None of the trials reported the important adverse outcome of root resorption.Three groups of comparisons were made.(1) Multistrand stainless steel initial arch wires compared to superelastic nickel titanium (NiTi) initial arch wires. There were four trials in this group, with different comparisons and outcomes reported at different times. No meta-analysis was possible. There is insufficient evidence from these trials to determine whether or not there is a difference in either rate of alignment or pain between stainless steel and NiTi initial arch wires.(2) Conventional (stabilised) NiTi initial arch wires compared to superelastic NiTi initial arch wires. There were two trials in this group, one reporting the outcome of alignment over 6 months and the other reporting pain over 1 week. There is insufficient evidence from these trials to determine whether or not there is any difference between conventional (stabilised) and superelastic NiTi initial arch wires with regard to either alignment or pain.(3) Single-strand superelastic NiTi initial arch wires compared to other NiTi (coaxial, copper NiTi (CuNiTi) or thermoelastic) initial arch wires. The three trials in this comparison each compared a different product against single-strand superelastic NiTi. There is very weak unreliable evidence, based on one very small study (n = 24) at high risk of bias, that coaxial superelastic NiTi may produce greater tooth movement over 12 weeks, but no information on associated pain or root resorption. This result should be interpreted with caution until further research evidence is available. There is insufficient evidence to determine whether or not there is a difference between either thermoelastic or CuNiTi and superelastic NiTi initial arch wires. There is no reliable evidence from the trials included in this review that any specific initial arch wire material is better or worse than another with regard to speed of alignment or pain. There is no evidence at all about the effect of initial arch wire materials on the important adverse effect of root resorption. Further well-designed and conducted, adequately-powered, RCTs are required to determine whether the performance of initial arch wire materials as demonstrated in the laboratory, makes a clinically important difference to the alignment of teeth in the initial stage of orthodontic treatment in patients.

Influence of sliding friction on leveling force of superelastic NiTi arch wire: A computational analysis

NASA Astrophysics Data System (ADS)

Razali, M. F.; Mahmud, A. S.; Mokhtar, N.; Abdullah, J.

2017-10-01

This study investigated the influence of sliding friction toward the effective force of superelastic NiTi arch wire applied in orthodontic bracing for tooth leveling. A three-dimensional finite-element model integrated with superelastic subroutine and contact interaction was used to predict the contribution of friction on force-deflection curve of NiTi wire in three brackets bending configuration. It was found that the friction between the wire and the bracket increased proportionally as a function of wire deflection, thus transforming the constant force characteristic of NiTi material into a slope. The highest magnitude of sliding friction was measured to be 3.1 N and 2.2 N with respect to the activation and deactivation of the arch wire.

The Foot's Arch and the Energetics of Human Locomotion.

PubMed

Stearne, Sarah M; McDonald, Kirsty A; Alderson, Jacqueline A; North, Ian; Oxnard, Charles E; Rubenson, Jonas

2016-01-19

The energy-sparing spring theory of the foot's arch has become central to interpretations of the foot's mechanical function and evolution. Using a novel insole technique that restricted compression of the foot's longitudinal arch, this study provides the first direct evidence that arch compression/recoil during locomotion contributes to lowering energy cost. Restricting arch compression near maximally (~80%) during moderate-speed (2.7 ms(-1)) level running increased metabolic cost by + 6.0% (p < 0.001, d = 0.67; unaffected by foot strike technique). A simple model shows that the metabolic energy saved by the arch is largely explained by the passive-elastic work it supplies that would otherwise be done by active muscle. Both experimental and model data confirm that it is the end-range of arch compression that dictates the energy-saving role of the arch. Restricting arch compression had no effect on the cost of walking or incline running (3°), commensurate with the smaller role of passive-elastic mechanics in these gaits. These findings substantiate the elastic energy-saving role of the longitudinal arch during running, and suggest that arch supports used in some footwear and orthotics may increase the cost of running.

Evaluation of arch form between Vietnamese and North American Caucasians using 3-dimensional virtual models.

PubMed

Trang, Vu Thi Thu; Park, Jae Hyun; Bayome, Mohamed; Shastry, Shruti; Mellion, Alex; Kook, Yoon-Ah

2015-01-01

The purpose of this study was to investigate the three-dimensional (3D) morphologic differences in the mandibular arch of Vietnamese and North American White subjects. The sample included 113 Vietnamese subjects (41 Class I, 37 Class II and 35 Class III) and 96 White subjects (29 Class I, 30 Class II and 37 Class III). The samples were regrouped according to arch form types (tapered, ovoid, and square) to compare the frequency distribution of the three arch forms between ethnic groups in each angle classification. The facial axis point of each tooth was digitized on 3D virtual models. Four linear and two ratio variables were measured. In comparing arch dimensions, the intercanine and intermolar widths were wider in Vietnamese than in Whites (p < 0.001, p = 0.042, respectively). In the White group, there was even frequency distribution of the three arch forms. However, in the Vietnamese group, the square arch form was the most frequent followed by tapered and ovoid arch forms. The arch forms of Whites were narrower than Vietnamese. In North American Whites, the distribution of the arch form types showed similar frequency. In Vietnamese, the square arch form was more frequent.

The biomechanics of zygomatic arch shape

PubMed Central

Smith, Amanda L.; Grosse, Ian R.

2017-01-01

Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. PMID:27870343

Identification of a distant cis-regulatory element controlling pharyngeal arch-specific expression of zebrafish gdf6a/radar

PubMed Central

Reed, Nykolaus P.; Mortlock, Douglas P.

2011-01-01

Skeletal formation is an essential and intricately regulated part of vertebrate development. Humans and mice deficient in Growth and Differentiation Factor 6 (Gdf6) have numerous skeletal abnormalities including joint fusions and cartilage reductions. The expression of Gdf6 is dynamic and in part regulated by distant evolutionarily conserved cis-regulatory elements. radar/gdf6a is a zebrafish ortholog of Gdf6 and has an essential role in embryonic patterning. Here we show that radar is transcribed in the cells surrounding and between the developing cartilages of the ventral pharyngeal arches, similar to mouse Gdf6. A 312 bp evolutionarily conserved region (ECR5), 122 kilobases downstream, drives expression in a pharyngeal arch-specific manner similar to endogenous radar/gdf6a. Deletion analysis identified a 78 bp region within ECR5 that is essential for transgene activity. This work illustrates that radar is regulated in the pharyngeal arches by a distant conserved element and suggests radar has similar functions in skeletal development in fish and mammals. PMID:20201106

Correlation between coronal and apical arch form and degree of divergence: a volumetric computed tomography analysis

PubMed Central

LOMBARDO, L.; VERONESI, F.; CANDOTTO, V.; NARDONE, M.; SICILIANI, G.

2017-01-01

SUMMARY Purpose. To determine the existence of any correlation between the degree of divergence and apical and coronal arch form using cone-beam computed tomography (CBCT). Materials and methods. A total of 176 (88 coronal and 88 apical) CBCT scans pertaining to a sample of 44 subjects (16 males and 28 females), of which 26 were Class I, 14 Class II and 4 Class III, were analysed. A lateral projection of the skull was obtained from each VCT and cephalometric tracing was performed (according to Ricketts) so as to divide the sample into subgroups based on the degree of divergence (11 short-faced, 18 norm-faced and 15 long-faced subjects). Dahlberg’s index values were calculated and Student’s t-test for paired data was applied. Results. On the whole, the hyperbolic cosine curve was found to be the most representative of the arch forms considered. Conclusions. A correlation between degree of divergence and the arch form of the apical and, especially, coronal portions of both the upper and lower jaws was revealed. PMID:29682260

Best surgical option for arch extension of type B aortic dissection: the open approach

PubMed Central

Kim, Joon Bum

2014-01-01

Arch extension of aortic dissection (AD) is reported to occur in 4-25% of patients presenting with acute type B AD. The DeBakey and Stanford classifications do not specifically account for this subset, however, recent studies have demonstrated that the prognosis of patients with arch extension in acute type B AD is virtually identical to that of others with type B AD. In this sense, it seems reasonable to extend the general management principles that are applied to classic acute type B AD even to patients with arch extension. This may be because even in patients with arch extension, most complications occur at locations distal to the arch, and therefore treatment of these patients is similar to that of complicated type B AD, namely thoracic endovascular aortic repair (TEVAR). Conversely, 10% of patients with acute type B AD and arch extension develop complications that are directly related to the arch pathology. This clinical scenario generally necessitates surgical arch repair through a sternotomy approach. The frozen elephant trunk technique combined with arch repair is a very reasonable option to treat this unique clinical entity that involves relatively distal locations of the aortic diseases. Combined arch and descending aorta replacement through thoracotomy is an alternative option particularly when the anatomical features of the target lesions are not suitable for a sternotomy approach or TEVAR. Nonetheless, the reported mortality associated with this approach has been exceedingly high. Hybrid arch repair is another consideration in treating these patients to reduce the treatment-related mortality and morbidity, especially when the arch pathology is limited to the distal part. Nevertheless, the safety and efficacy of this procedure in cases with more extensive arch involvement needs to be assessed in further studies in comparison with other treatment modalities. PMID:25133105

A flap based on the plantar digital artery arch branch to improve appearance of reconstructed fingers: Anatomical and clinical application.

PubMed

Tang, Lin-Feng; Ju, Ji-Hui; Liu, Yue-Fei; Lan, Bo; Hou, Rui-Xing

2018-02-01

To investigate blood supply features of the flap based on the plantar digital artery arch and arch branch artery, and the treatment of outcomes of reconstructed fingers by the plantar digital artery arch branch island flap. Eight fresh foot specimens were employed with red emulsion infusion and microdissection. The vascular organization was observed in the second toe, such as initiation site, the course, and the number of the plantar digital artery arch branch. There were 15 fingers of 13 patients (8 males and 5 females) with finger defects accompanied by toe transfer, using the plantar digital artery arch branch flap inserted in the neck of the second toe to correct the appearance defect caused by a narrow "neck" and a bulbous tip. The intact plantar digital arches were identified in all specimens. The plantar digital artery arch had 5 branches. The range of external diameter of the arch branch was 0.4-0.6 mm. All the plantar digital artery arch branch island flaps and the reconstructed fingers survived. These cases were conducted with a follow-up period for 3-18 months (average, 9 months). All the plantar digital artery arch branch island flaps and reconstructed fingers demonstrated a satisfactory appearance and favorable sense function. The reconstructed finger-tip characteristic was good, with no obvious scar hyperplasia. The range of flexion and extension of reconstructed fingers was favorable as well. The plantar digital artery arch and arch branch artery possess regular vasa vasorum and abundant vascularity. A flap based on the plantar digital artery arch branch is an ideal selection for plastic surgery of reconstructed fingers. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Collapse Causes Analysis and Numerical Simulation for a Rigid Frame Multiple Arch Bridge

NASA Astrophysics Data System (ADS)

Zuo, XinDai

2018-03-01

Following the collapse accident of Baihe Bridge, the author built a plane model of the whole bridge firstly and analyzed the carrying capacity of the structure for a 170-tons lorry load. Then the author built a spatial finite element model which can accurately simulate the bridge collapse course. The collapse course was simulated and the accident scene was reproduced. Spatial analysis showed rotational stiffness of the pier bottom had a large influence on the collapse from of the superstructures. The conclusion was that the170 tons lorry load and multiple arch bridge design were the important factors leading to collapse.

[3-dimensional cephalometry in orthodontics. The current possibilities of Cepha 3DT software].

PubMed

Faure, Jacques; Treil, Jacques; Borianne, Philippe; Casteigt, Jean; Baron, Pascal

2002-03-01

A 3D cephalometric analysis method from a scanner acquisition, has been developed thanks to a long collaboration between the CIRAD modeling Laboratory and Jacques Treil. The model of skeletal description is based on eight landmarks related to the neuromatrical axis of facial growth (heads of the mallei, supraorbital, suborbital, submental points); it has been abundantly described. The purpose of this work consists in presenting the dentoalveolar level of the analysis. The description and the marking of the arches and the teeth mainly rest on the systematic use of a mathematical tool, the calculation of the central matrix of inertia, and on three fundamental choices: the identification of the dental arches from their constituting teeth leaving aside any alveolar marking, the marking of each tooth relative to the arch, as it can be observed by the orthodontist's eye, and not relative to the craniofacial architecture, the definition of the position of each tooth by the orientation of its coronoradicular axis and not its sole buccal side, Their uses in orthodontics are numerous: diagnosis, choice of the mechanics, therapeutic simulation, therapeutic follow up, analysis of the findings... Clinical applications illustrate the theoretical presentation.

Heritability estimates of dental arch parameters in Lithuanian twins.

PubMed

Švalkauskienė, Vilma; Šmigelskas, Kastytis; Šalomskienė, Loreta; Andriuškevičiūtė, Irena; Šalomskienė, Aurelija; Vasiliauskas, Arūnas; Šidlauskas, Antanas

2015-01-01

The genetic influence on dental arch morphology may be country-specific, thus it is reasonable to check the estimates of genetics across different populations. The purpose of this study was to evaluate the heredity of dental arch morphology in the sample of Lithuanian twins with accurate zygosity determination. The study sample consisted of digital dental models of 40 monozygotic (MZ) and 32 dizygotic (DZ) twin pairs. The estimates of heritability (h(2)) for dental arch breadth and length were calculated. All dental arch breadths and lengths were statistically significantly larger in men than in women. Arch length differences between genders were less expressed than largest breadth differences. In the upper jaw the largest genetic effect was found on the arch breadth between lateral incisors. The heritability of dental arch length demonstrated similar differences between upper and lower jaw with mandible dental arch length being more genetically determined. The largest genetic impact was found on the upper dental arch breadth between lateral incisors. Similar, but lower heritability is inherent for canines and first premolars of the upper jaw and first premolars of the lower jaw. It also can be noted, that arch breadths between posterior teeth show lower heritability estimates than between anterior teeth on both jaws. The dental arch in the upper jaw has more expressed genetic component than in the lower jaw.

Arch index and running biomechanics in children aged 10-14 years.

PubMed

Hollander, Karsten; Stebbins, Julie; Albertsen, Inke Marie; Hamacher, Daniel; Babin, Kornelia; Hacke, Claudia; Zech, Astrid

2018-03-01

While altered foot arch characteristics (high or low) are frequently assumed to influence lower limb biomechanics and are suspected to be a contributing factor for injuries, the association between arch characteristics and lower limb running biomechanics in children is unclear. Therefore, the aim of this study was to investigate the relationship between a dynamically measured arch index and running biomechanics in healthy children. One hundred and one children aged 10-14 years were included in this study and underwent a biomechanical investigation. Plantar distribution (Novel, Emed) was used to determine the dynamic arch index and 3D motion capture (Vicon) to measure running biomechanics. Linear mixed models were established to determine the association between dynamic arch index and foot strike patterns, running kinematics, kinetics and temporal-spatial outcomes. No association was found between dynamic arch index and rate of rearfoot strikes (p = 0.072). Of all secondary outcomes, only the foot progression angle was associated with the dynamic arch index (p = 0.032) with greater external rotation in lower arched children. Overall, we found only few associations between arch characteristics and running biomechanics in children. However, altered foot arch characteristics are of clinical interest. Future studies should focus on detailed foot biomechanics and include clinically diagnosed high and low arched children. Copyright © 2018 Elsevier B.V. All rights reserved.

Diapiric origin of the Blytheville and Pascola arches in the Reelfoot rift, east-central United States: Relation to New Madrid seismicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKeown, F.A.; Diehl, S.F.; Glick, E.E.

1990-11-01

Most of the earthquakes in the New Madrid seismic zone correlate spatially with the Blytheville arch and part of the Pascoal arch, which are interpreted to be the same structure. Both arches may have formed by diapirism along the axis of the Reelfoot rift. Seismic, geophysical, and drill-hole data indicate that the rocks in the arches are highly deformed and fractured and have gross lithologic properties that make them weaker than rocks adjacent to the arches. The weaker rocks are inferred to fail seismically more readily than the stronger rocks adjacent to the arches.

Analysis of foot structure in athletes sustaining proximal fifth metatarsal stress fracture.

PubMed

Hetsroni, Iftach; Nyska, Meir; Ben-Sira, David; Mann, Gideon; Segal, Ofer; Maoz, Guy; Ayalon, Moshe

2010-03-01

In the past, several studies provided anecdotal descriptions of high-arched feet in individuals sustaining proximal fifth metatarsal stress fractures. This relationship has never been supported by scientific evidence. Our objective was to examine whether athletes who sustained this injury had an exceptional static foot structure or dynamic loading pattern. Ten injured professional soccer players who regained full professional activity following a unilateral proximal fifth metatarsal stress fracture and ten control soccer players were examined. Independent variables included static evaluation of foot and arch structure, followed by dynamic plantar foot pressure evaluation. Each variable was compared between injured, contra-lateral uninjured, and control feet. Static measurements of foot and arch structure did not reveal differences among the groups. However, plantar pressure evaluation revealed relative unloading of the fourth metatarsal in injured and uninjured limbs of injured athletes compared with control, while the fifth metatarsal revealed pressure reduction only in the injured limbs of injured athletes. Athletes who sustained proximal fifth metatarsal stress fracture were not characterized by an exceptional static foot structure. Dynamically, lateral metatarsal unloading during stance may either play a role in the pathogenesis of the injury, or alternately represent an adaptive process. Footwear fabrication for previously injured athletes should not categorically address cushioning properties designed for high-arch feet, but rather focus on individual dynamic evaluation of forefoot loading, with less attention applied to static foot and arch characteristics.

Distribution, Management Difficulty and Outcome of Branchial Anomalies.

PubMed

Sattar, M A; Sultana, M T; Ahmed, S

2018-01-01

Branchial arch anomalies are one of the most common congenital anomalies of the neck. Developmental anomalies of the branchial apparatus account for 17% of all pediatric cervical masses. This study aimed to focus on proper diagnosis of branchial anomaly and describe occurrence, presentation, management and outcome of usual and unusual types. This ten-year prospective observational study was conducted from November 2005 to November 2015 including 2-year postoperative follow-up of the patients in Department of ENT, Bangabandhu Sheikh Mujib Medical University (BSMMU), Dhaka, Bangladesh. Total 89 patients were enrolled for this study. Information was recorded on Clinical examination, relevant investigation, Per-operative findings and Histo-pathological findings. After receiving Histo-pathological findings 61 cases were proved as branchial arch anomalies. Ultrasonography and Histopathology was done for every patient. Fistulogram and sinogram was done for patient of fistula and sinus respectively. CT scan was needed for 9 patients, MRI for 3 patients and 12 patient undergone FNAC. Outcomes of those patients were described in terms of Hospital stay, Complications and Follow up studies. Data analysis was done by Standard Statistical Method.Presentation of a number of participant's mimics Branchial arch anomalies; 4.91% was syndromal. Second branchial arch anomalies were the highest. Management was exclusively surgical. Recurrence rate was about 6.56%. Surgery is the tool for diagnosis, treatment, preventing complications, avoiding carcinoma for branchial arch anomalies.

Optical silencing of body wall muscles induces pumping inhibition in Caenorhabditis elegans

PubMed Central

Takahashi, Megumi

2017-01-01

Feeding, a vital behavior in animals, is modulated depending on internal and external factors. In the nematode Caenorhabditis elegans, the feeding organ called the pharynx ingests food by pumping driven by the pharyngeal muscles. Here we report that optical silencing of the body wall muscles, which drive the locomotory movement of worms, affects pumping. In worms expressing the Arch proton pump or the ACR2 anion channel in the body wall muscle cells, the pumping rate decreases after activation of Arch or ACR2 with light illumination, and recovers gradually after terminating illumination. Pumping was similarly inhibited by illumination in locomotion-defective mutants carrying Arch, suggesting that perturbation of locomotory movement is not critical for pumping inhibition. Analysis of mutants and cell ablation experiments showed that the signals mediating the pumping inhibition response triggered by activation of Arch with weak light are transferred mainly through two pathways: one involving gap junction-dependent mechanisms through pharyngeal I1 neurons, which mediate fast signals, and the other involving dense-core vesicle-dependent mechanisms, which mediate slow signals. Activation of Arch with strong light inhibited pumping strongly in a manner that does not rely on either gap junction-dependent or dense-core vesicle-dependent mechanisms. Our study revealed a new aspect of the neural and neuroendocrine controls of pumping initiated from the body wall muscles. PMID:29281635

Modal Analysis of Two Bridges, Bryce Canyon National Park

NASA Astrophysics Data System (ADS)

Geimer, P. R.; Moore, J. R.; Thorne, M. S.; Quirk, B.

2016-12-01

We used ambient seismic data to identify the primary resonant frequencies of the up-canyon span of Two Bridges, a natural sandstone arch located in Bryce Canyon National Park, Utah. Two broadband seismometers placed on the span recorded continuous data for 14 hours, which were compared to measurements from a nearby reference station. Spectral peaks identified in the recordings represent resonant modes of the arch. We observed a slight drift in the fundamental frequency, which we attribute to daily changes in rock temperature and associated thermal stresses. However, no detectable vertical motion was recorded over the same time period using a laser distance meter. We applied slight impulses to the arch along its main axes to experimentally determine modal damping ratios, which describe the vibrational properties of the arch. Ground-based photogrammetry was then used to construct a new 3D model of the feature, which we imported into COMSOL Multiphysics to perform numerical modal analyses. By varying the material properties, we were able to match the fundamental resonant frequency of the arch and several higher order modes, as well as associated polarization attributes. Repeat resonant frequency measurements at Two Bridges will help us better understand how the structure changes over time in response to environment factors. The Claron Formation, which forms Two Bridges, is highly susceptible to weathering and erosion making natural hazards, such as rock falls, a frequent occurrence in Bryce Canyon.

The Biomechanics of Zygomatic Arch Shape.

PubMed

Smith, Amanda L; Grosse, Ian R

2016-12-01

Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. Anat Rec, 299:1734-1752, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

The Foot’s Arch and the Energetics of Human Locomotion

PubMed Central

Stearne, Sarah M.; McDonald, Kirsty A.; Alderson, Jacqueline A.; North, Ian; Oxnard, Charles E.; Rubenson, Jonas

2016-01-01

The energy-sparing spring theory of the foot’s arch has become central to interpretations of the foot’s mechanical function and evolution. Using a novel insole technique that restricted compression of the foot’s longitudinal arch, this study provides the first direct evidence that arch compression/recoil during locomotion contributes to lowering energy cost. Restricting arch compression near maximally (~80%) during moderate-speed (2.7 ms−1) level running increased metabolic cost by + 6.0% (p < 0.001, d = 0.67; unaffected by foot strike technique). A simple model shows that the metabolic energy saved by the arch is largely explained by the passive-elastic work it supplies that would otherwise be done by active muscle. Both experimental and model data confirm that it is the end-range of arch compression that dictates the energy-saving role of the arch. Restricting arch compression had no effect on the cost of walking or incline running (3°), commensurate with the smaller role of passive-elastic mechanics in these gaits. These findings substantiate the elastic energy-saving role of the longitudinal arch during running, and suggest that arch supports used in some footwear and orthotics may increase the cost of running. PMID:26783259

Three-dimensional measurement of foot arch in preschool children

PubMed Central

2012-01-01

Background The prevalence of flexible flatfoot is high among preschool-aged children, but the effects of treatment are inconclusive due to the unclear definitions of normal flatfoot. To date, a universally accepted evaluation method of the foot arch in children has not been completely established. Our aims of this study were to establish a new method to evaluate the foot arch from a three dimensional perspective and to investigate the flexibility of the foot arch among children aged from two to six. Methods A total of 44 children aged from two to six years of age were put into five age groups in this study. The navicular height was measured with one leg standing, and both feet were scanned separately in both sitting and one leg standing positions to compute the foot arch volume. The arch volume index, which represents the ratio of the difference in volume between sitting and one leg standing positions to the volume when sitting was calculated to demonstrate the flexibility of the foot arch. The differences of measured parameters between each aged group were analyzed by one-way ANOVA. Results The arch volumes when sitting and standing were highly correlated with the navicular height. The navicular height ranged from 15.75 to 27 mm, the arch volume when sitting ranged from 6,223 to 11,630 mm3, and the arch volume when standing from 3,111 to 7,848 mm3 from two to six years of age. The arch volume index showed a declining trend as age increased. Conclusion This study is the first to describe the foot arch with volume perspective in preschool-aged children. The foot arch volume was highly correlated with the navicular height. Research results show both navicular height index and arch volume index gradually increase with age from two to six. At the same time the arch also becomes rigid with age from two to six. These results could be applied for clinical evaluation of the foot arch and post-treatment evaluation. PMID:23009315

Elastoviscoplastic snap-through behavior of shallow arches subjected to thermomechanical loads

NASA Technical Reports Server (NTRS)

Simitses, George J.; Song, Yuzhao; Sheinman, Izhak

1991-01-01

The problem of snap-through buckling of clamped shallow arches under thermomechanical loads is investigated. The analysis is based on nonlinear kinematic relations and nonlinear rate-dependent unified constitutive equations. A finite element approach is employed to predict the, in general, inelastic buckling behavior. The construction material is alloy B1900 + Hf, which is commonly utilized in high-temperature environments. The effect of several parameters is assessed. These parameters include the rise parameter and temperature. Comparison between elastic and elastoviscoplastic responses is also presented.

Non-isothermal elastoviscoplastic snap-through and creep buckling of shallow arches

NASA Technical Reports Server (NTRS)

Simitses, G. J.; Riff, R.

1987-01-01

The problem of buckling of shallow arches under transient thermomechanical loads is investigated. The analysis is based on nonlinear geometric and constitutive relations, and is expressed in a rate form. The material constitutive equations are capable of reproducing all non-isothermal, elasto-viscoplastic characteristics. The solution scheme is capable of predicting response which includes pre and postbuckling with creep and plastic effects. The solution procedure is demonstrated through several examples which include both creep and snap-through behavior.

Malocclusion and dental caries experience among 8–9-year-old children in a city of South Indian region: A cross-sectional survey

PubMed Central

Disha, Patil; Poornima, P.; Pai, Suryakanth M.; Nagaveni, N. B.; Roshan, N. M.; Manoharan, M.

2017-01-01

BACKGROUND: Although numerous studies have documented malocclusion in various age groups in India, the literature on the prevalence of malocclusion in mixed dentition is scanty. Dental caries is another most common condition affecting the general health. However, its association with malocclusion in mixed dentition is not well known. AIM: The purpose of this study was to establish the prevalence of malocclusion and its association with caries experience in 8–9-year-old children of Davangere city, South Indian region. SETTING AND DESIGN: The study design was a cross-sectional survey. MATERIALS AND METHODS: A total of 800 children from 350 schools (both males and females) were randomly selected for the study. t-test and Chi-square test were used for statistical analysis. RESULTS: The overall prevalence of malocclusion among 8–9-year-old children was 40.9%. The most prevalent malocclusion was crowding (11.5%), followed by excessive overjet (9.4%), deep bite (6.8%), spacing (6.5%), crossbite (4.5%), and open bite (3.2%). Class I molar relationship prevailed in 95.5% of children. CONCLUSION: The prevalence of malocclusion in our study was in accordance with the other studies reported in India, which ranged from 19.6% to 90%. Furthermore, correlation of malocclusion and dental caries in the primary dentition, although nonsignificant, presented children with malocclusion to have a higher caries experience than children without malocclusion. PMID:29296599

Is the relative increase in income inequality related to tooth loss in middle-aged adults?

PubMed

Goulart, Mariél de Aquino; Vettore, Mario Vianna

2016-01-01

To assess whether Brazilian middle-aged adults living in cities that experienced a relative increase on income inequality were more likely to have severe tooth loss and lack a functional dentition. Data on Brazilian adults aged 35-44 years from state capitals and Federal District from the 2010 Brazilian Oral Health Survey (SBBrasil 2010) were analyzed. Clinically assessed tooth loss outcomes were severe tooth loss (<9 remaining natural teeth) and lack of functional dentition (<21 natural teeth). Income inequality was assessed by Gini Index in 1991, 2000, and 2003 using tertiles of distribution. Variation in Gini Index was assessed by changes in the tertiles distribution between years. Multilevel logistic regression models were used to estimate odds ratios (ORs) and 95 percent confidence intervals (95 percent CI) between variation in income inequality and tooth loss outcomes adjusting for individual socio-demographic characteristics. Prevalence of severe tooth loss and lack of functional dentition was 4.8 percent and 21.2 percent, respectively. Individuals living in cities with moderate and high increase in income inequality between 1991 and 2003 were more likely to have severe tooth loss and lack a functional dentition in 2010 compared with those living in cities with stable income inequality in the same period. Relationships between low family income and both tooth loss outcomes were significantly attenuated by relative increases in income inequality. Relative increases in income inequality were significantly associated with severe tooth loss and lack of a functional dentition in Brazilian middle-aged adults. © 2015 American Association of Public Health Dentistry.

Prevalence of dental caries and treatment needs among school going children of Chandigarh.

PubMed

Prabakar, Jayashri; John, Joseph; Srisakthi, D

2016-01-01

Dental caries is the most common chronic disease of childhood that interferes with normal nutrition intake, speech, and daily routine activities. Dental caries is a lifetime disease, and the highest priority risk group is school children. To assess the prevalence of dental caries and treatment needs among school going children of Chandigarh. A cross-sectional study was done among school going children of Chandigarh in the age group of 3-17 years. The subjects were selected from four randomly selected schools. All the children from the selected schools were examined. A total of 4493 subjects formed the sample size. Dentition status was assessed using dft index by Gruebbel for primary dentition and DMFT index by Klein, Palmer, Knutson for permanent dentition, respectively. Chi-square test was used to find an association between the study variables. Independent t-test and one-way ANOVA were used to compare the mean difference. Among the 4493 study subjects, caries prevalence was found to be 47.3%. Mean dft and DMFT score of the population was 1.06 ± 1.995 and 0.41 ± 1.022, respectively. When analyzing the treatment needs among various age groups 42.6% of the study subjects required oral prophylaxis and 45% required restorative procedures. Based on the findings, it can be concluded that high prevalence of caries was found in primary dentition than permanent dentition and most of the decayed teeth were untreated. This study emphasize the need for treating dental caries at its earliest possible stage and parents should be made aware of caries preventive measures for their children.

To evaluate the validity of Recurring Esthetic Dental proportion in natural dentition

PubMed Central

Shetty, Shilpa; Pitti, Varun; Satish Babu, CL; Surendra Kumar, GP; Jnanadev, KR

2011-01-01

Background: Different proportions are described in the literature for smile designing, such as Golden proportion, Golden percentage, Preston's proportion, and recently, Recurring Esthetic Dental (RED) proportion. Aims and Objectives: To evaluate the existence of RED proportion in natural dentition. To determine the relative height of maxillary lateral incisor and canine occurring in natural dentition so that it can be used in any of the above proportions. Materials and Methods: Fifteen male subjects and 15 female subjects in each of the different age groups of 18–23 years, 24–29 years and 30–35 years were selected for this study (total 90). Photographs of the subjects were taken using Nikon D200 camera with 135 mm lens and analyzed using Adobe Photoshop CS4 extended software. The height and width of maxillary central incisors, lateral incisors and canines were found out using the measuring tool provided in the software. Results: Average width ratio and height ratio of maxillary lateral incisor to central incisor and maxillary canine to lateral incisor were calculated to check the existence of RED proportion in natural dentition. Average lateral incisor to central incisor height ratio for “small”- and “medium”-sized teeth was found to be 88% and for “tall”-sized teeth was found to be 84%. Average canine to lateral incisor height ratio for “small”- and “medium”-sized teeth was found to be 106% and for “tall”-sized teeth was found to be 105%. Conclusions: Within the limitations of the study, RED proportion was not seen in natural dentition. PMID:22025841

Longitudinal associations between children’s dental caries and risk factors

PubMed Central

Chankanka, Oitip; Cavanaugh, Joseph E.; Levy, Steven M.; Marshall, Teresa A.; Warren, John J; Broffitt, Barbara; Kolker, Justine L.

2015-01-01

Dental caries is a common disease in children of all ages. It is desirable to know whether children with primary, mixed and permanent dentitions share risk factors for cavitated and non-cavitated caries. Objective To assess the longitudinal associations between caries outcomes and modifiable risk factors. Methods One hundred and fifty-six children in the Iowa Fluoride Study met inclusion criteria of three dental examinations and caries-related risk factor assessments preceding each examination. Surface-specific counts of new non-cavitated caries and cavitated caries at the primary (Exam 1: age 5), mixed (Exam 2: age 9) and permanent (Exam 3: age 13) dentition examinations were outcome variables. Explanatory variables were caries-related factors, including averaged beverage exposure frequencies, toothbrushing frequencies, and composite water fluoride levels collected from 3–5, 6–8, and 11–13 years, dentition category, socioeconomic status and gender. Generalized linear mixed models (GLMMs) were used to explore the relationships between new non-cavitated or cavitated caries and caries-related variables. Results Greater frequency of 100% juice exposure was significantly associated with fewer non-cavitated and cavitated caries surfaces. Greater toothbrushing frequency and high SES were significantly associated with fewer new non-cavitated caries. Children had significantly more new cavitated caries surfaces at the mixed dentition examination than at the primary and permanent dentition examinations. Conclusions There were common caries-related factors for more new non-cavitated caries across the three exams, including less frequent 100% juice exposure, lower toothbrushing frequency and lower socioeconomic status. Less frequent 100% juice exposures might be associated with higher exposures to several other cariogenic beverages. PMID:22320287

A new rhynchocephalian from the late jurassic of Germany with a dentition that is unique amongst tetrapods.

PubMed

Rauhut, Oliver W M; Heyng, Alexander M; López-Arbarello, Adriana; Hecker, Andreas

2012-01-01

Rhynchocephalians, the sister group of squamates (lizards and snakes), are only represented by the single genus Sphenodon today. This taxon is often considered to represent a very conservative lineage. However, rhynchocephalians were common during the late Triassic to latest Jurassic periods, but rapidly declined afterwards, which is generally attributed to their supposedly adaptive inferiority to squamates and/or Mesozoic mammals, which radiated at that time. New finds of Mesozoic rhynchocephalians can thus provide important new information on the evolutionary history of the group. A new fossil relative of Sphenodon from the latest Jurassic of southern Germany, Oenosaurus muehlheimensis gen. et sp. nov., presents a dentition that is unique amongst tetrapods. The dentition of this taxon consists of massive, continuously growing tooth plates, probably indicating a crushing dentition, thus representing a previously unknown trophic adaptation in rhynchocephalians. The evolution of the extraordinary dentition of Oenosaurus from the already highly specialized Zahnanlage generally present in derived rhynchocephalians demonstrates an unexpected evolutionary plasticity of these animals. Together with other lines of evidence, this seriously casts doubts on the assumption that rhynchocephalians are a conservative and adaptively inferior lineage. Furthermore, the new taxon underlines the high morphological and ecological diversity of rhynchocephalians in the latest Jurassic of Europe, just before the decline of this lineage on this continent. Thus, selection pressure by radiating squamates or Mesozoic mammals alone might not be sufficient to explain the demise of the clade in the Late Mesozoic, and climate change in the course of the fragmentation of the supercontinent of Pangaea might have played a major role.

Similar cerebral protective effectiveness of antegrade and retrograde cerebral perfusion combined with deep hypothermia circulatory arrest in aortic arch surgery: a meta-analysis and systematic review of 5060 patients.

PubMed

Hu, Zhipeng; Wang, Zhiwei; Ren, Zongli; Wu, Hongbing; Zhang, Min; Zhang, Hao; Hu, Xiaoping

2014-08-01

Our objective was to determine if antegrade cerebral perfusion (ACP) and retrograde cerebral perfusion (RCP) combined with deep hypothermia circulatory arrest in aortic arch surgery results in different mortality and neurologic outcomes. The Cochrane Library, Medline, EMBASE, CINAHL, Web of Science, and the Chinese Biomedical Database were searched for studies reporting on postoperative strokes, permanent neurologic dysfunction, temporary neurologic dysfunction, and all causes mortality within 30 days postoperation in aortic arch surgery. Meta-analysis for effect size, t test, and I(2) for detecting heterogeneity and sensitivity analysis for assessing the relative influence of each study was performed. Fifteen included studies encompassed a total of 5060 patients of whom 2855 were treated with deep hypothermic circulatory arrest plus ACP and 1897 were treated with deep hypothermic circulatory arrest plus RCP. Pooled analysis showed no significant statistical difference (P > .01) of 30-day mortality, permanent neurologic dysfunction, and transient neurologic dysfunction in the 2 groups. Before sensitivity analysis, postoperative stroke incidence in the ACP group was higher than in the RCP group (7.2% vs 4.7%; P < .01). After a study that included a different percentage of patients with a history of central neurologic events in the 2 groups was ruled out, postoperative stroke incidence in the 2 groups also showed no significant statistical difference (P > .01). ACP and RCP provide similar cerebral protective effectiveness combined with deep hypothermia circulatory arrest and could be selected according to the actual condition in aortic arch surgery. A high-quality randomized controlled trial is urgently needed to confirm this conclusion, especially for stroke morbidity following ACP or RCP. Copyright © 2014 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens.

PubMed

Sidiq, Mohsin; Yousuf, Asif; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam's clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley's appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238.

Double talon cusps on supernumerary tooth fused to maxillary central incisor: Review of literature and report of case

PubMed Central

2014-01-01

Human tooth development is a continuous process begin at the sixth weeks in utero and extends to about sixth months after birth for the primary dentition and from sixteenth week in utero to late adolescence for permanent dentition. There is no other organ of the human body which takes so long to attain its ultimate morphology as dentition. Several physiologic growth processes participate in the progressive development of the teeth including: initiation, proliferation, histodifferentiation, morphodifferentiation, apposition, calcification, and eruption. Aberrations in different stages of tooth development can result in unique manifestations both in primary and permanent dentitions. The fact that premaxilla is the predilection site for the occurrence of supernumerary teeth, talon cusp, dens invaginatus, and geminated teeth may suggest that the embryological development of premaxilla differ from other sites of the jaws. The dental abnormalities presented in this review are of great concern to dentist and parents because they create clinical, pathological and esthetic problems. Dental practitioner should be aware of the clinical sign, associated problems and treatment options for a given case. Key words:Double talon cusps, fusion, supernumerary, case report. PMID:25593664

Early development and replacement of the stickleback dentition

PubMed Central

Ellis, Nicholas A.; Donde, Nikunj N.; Miller, Craig T.

2017-01-01

Teeth have long served as a model system to study basic questions about vertebrate organogenesis, morphogenesis, and evolution. In non-mammalian vertebrates, teeth typically regenerate throughout adult life. Fish have evolved a tremendous diversity in dental patterning in both their oral and pharyngeal dentitions, offering numerous opportunities to study how morphology develops, regenerates, and evolves in different lineages. Threespine stickleback fish (Gasterosteus aculeatus) have emerged as a new system to study how morphology evolves, and provide a particularly powerful system to study the development and evolution of dental morphology. Here we describe the oral and pharyngeal dentitions of stickleback fish, providing additional morphological, histological, and molecular evidence for homology of oral and pharyngeal teeth. Focusing on the ventral pharyngeal dentition in a dense developmental time course of lab-reared fish, we describe the temporal and spatial consensus sequence of early tooth formation. Early in development, this sequence is highly stereotypical and consists of seventeen primary teeth forming the early tooth field, followed by the first tooth replacement event. Comparing this detailed morphological and ontogenetic sequence to that described in other fish reveals that major changes to how dental morphology arises and regenerates have evolved across different fish lineages. PMID:27145214

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens

PubMed Central

Sidiq, Mohsin; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

ABSTRACT The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam’s clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley’s appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238. PMID:26604544

Oral habits as risk factors for anterior open bite in the deciduous and mixed dentition - cross-sectional study.

PubMed

Urzal, V; Braga, A C; Ferreira, A P

2013-12-01

Anterior open bite (AOB) is an occlusal anomaly commonly associated with oral habits (OH). The aim of this study was to determine the prevalence of OH as a risk factor for the AOB. A group of children aged between 3 and 12 years were observed. The statistical methodology included independent chi-square test, Fisher's exact test and binary logistic regression. The frequency of oral habits was of 43.5% in the deciduous dentition and 54.2% in the mixed dentition. There was a statistically significant association of pacifier sucking: 61.7 and 16.1 odd ratios (OR), and tongue thrust: 3.9 and 9.2 OR with AOB in both groups, respectively. Thumb sucking occurred only in the deciduous dentition with 5.6 OR. OH and AOB have a high frequency in children. They hinder the normal development of dental and skeletal structures. As OH are risk factors for AOB, the damaging habits most frequently associated are: pacifier sucking, thumb sucking, and tongue thrust. Due to the correlation between the prevalence of AOB and OH, prevention strategies incorporating psychological data related to children should be integrated into a national public health programme.

Differential distribution of the Ca (2+) regulator Pcp4 in the branchial arches is regulated by Hoxa2.

PubMed

Anderson, Megan; Amin, Shilu; Luise, Fabiana; Zeef, Leo; Bobola, Nicoletta

2013-01-01

Branchial arches are externally visible tissue bands in the head region of all vertebrate embryos. Although initially formed from similar components, each arch will give rise to different head and neck structures. In a screen designed to characterize the molecular control of branchial arch identity in mouse, we identified Pcp4 as a second branchial arch-specific molecular signature. We further show that the transcription factor Hoxa2 binds to Pcp4 chromatin and regulates Pcp4 expression in the second arch. Hoxa2 is also sufficient to induce Pcp4 expression in anterior first arch cells, which are Pcp4-negative.

Mandibular dental arch changes with active self-ligating brackets combined with different archwires.

PubMed

Atik, E; Akarsu-Guven, B; Kocadereli, I

2018-05-01

The aim was to compare mandibular arch and incisor inclinational changes by comparing active self-ligating brackets used with different forms of archwires with a control group in nonextraction cases. The sample of 50 patients with Class I malocclusion was divided into three groups: Group I was treated with active self-ligating brackets (Nexus, Ormco/Orange, CA, USA) used with Damon arch form copper nickel-titanium (Cu-NiTi) and stainless steel (SS) wires; Group II was treated with interactive self-ligating bracket system (Empower, American Orthodontics, Sheboygan, Wis, USA) used with standard Cu-NiTi and SS wires; and Group III was treated with Roth prescribed conventional brackets (Forestadent, Pforzheim, Germany) with standard Cu-NiTi and SS wires which was designed as a control group. Changes in dimension of mandibular arch and inclination of incisors were assessed on dental models and lateral cephalometric radiographs at pretreatment (T1) and posttreatment (T2) periods. Paired-t test and one-way analysis of variance were used to perform intragroup and intergroup comparisons, respectively. In all groups, an average increase of transversal distances occurred from pretreatment to the posttreatment period (P < 0.05). However, mandibular arch length increase was significantly different among the Groups I-III (P = 0.008) and I-II (P = 0.006). No significant intergroup difference was found with regard to incisor inclinational changes. Bracket type had no significant effect on the mandibular dimensional or incisor inclination changes. Besides this, archwire type had only little effect on the treatment results as active self-ligating bracket with Damon archwires increased mandibular arch length greater than other groups.

Identification of Aortic Arch-Specific Quantitative Trait Loci for Atherosclerosis by an Intercross of DBA/2J and 129S6 Apolipoprotein E-Deficient Mice

PubMed Central

Kayashima, Yukako; Makhanova, Natalia A.; Matsuki, Kota; Tomita, Hirofumi; Bennett, Brian J.; Maeda, Nobuyo

2015-01-01

The genetic background of apolipoprotein E (apoE) deficient mice influences atherosclerotic plaque development. We previously reported three quantitative trait loci (QTL), Aath1–Aath3, that affect aortic arch atherosclerosis independently of those in the aortic root in a cross between C57BL6 apoEKO mice (B6-apoE) and 129S6 apoEKO mice (129-apoE). To gain further insight into genetic factors that influence atherosclerosis at different vascular locations, we analyzed 335 F2 mice from an intercross between 129-apoE and apoEKO mice on a DBA/2J genetic background (DBA-apoE). The extent of atherosclerosis in the aortic arch was very similar in the two parental strains. Nevertheless, a genome-wide scan identified two significant QTL for plaque size in the aortic arch: Aath4 on Chromosome (Chr) 2 at 137 Mb and Aath5 on Chr 10 at 51 Mb. The DBA alleles of Aath4 and Aath5 respectively confer susceptibility and resistance to aortic arch atherosclerosis over 129 alleles. Both QTL are also independent of those affecting plaque size at the aortic root. Genome analysis suggests that athero-susceptibility of Aath4 in DBA may be contributed by multiple genes, including Mertk and Cd93, that play roles in phagocytosis of apoptotic cells and modulate inflammation. A candidate gene for Aath5 is Stab2, the DBA allele of which is associated with 10 times higher plasma hyaluronan than the 129 allele. Overall, our identification of two new QTL that affect atherosclerosis in an aortic arch-specific manner further supports the involvement of distinct pathological processes at different vascular locations. PMID:25689165

Atlas Assimilation Patterns in Different Types of Adult Craniocervical Junction Malformations.

PubMed

Ferreira, Edson Dener Zandonadi; Botelho, Ricardo Vieira

2015-11-01

This is a cross-sectional analysis of resonance magnetic images of 111 patients with craniocervical malformations and those of normal subjects. To test the hypothesis that atlas assimilation is associated with basilar invagination (BI) and atlas's anterior arch assimilation is associated with craniocervical instability and type I BI. Atlas assimilation is the most common malformation in the craniocervical junction. This condition has been associated with craniocervical instability and BI in isolated cases. We evaluated midline Magnetic Resonance Images (MRIs) (and/or CT scans) from patients with craniocervical junction malformation and normal subjects. The patients were separated into 3 groups: Chiari type I malformation, BI type I, and type II. The atlas assimilations were classified according to their embryological origins as follows: posterior, anterior, and both arches assimilation. We studied the craniometric values of 111 subjects, 78 with craniocervical junction malformation and 33 without malformations. Of the 78 malformations, 51 patients had Chiari type I and 27 had BI, of whom 10 presented with type I and 17 with type II BI. In the Chiari group, 41 showed no assimilation of the atlas. In the type I BI group, all patients presented with anterior arch assimilation, either in isolation or associated with assimilation of the posterior arch. 63% of the patients with type II BI presented with posterior arch assimilation, either in isolation or associated with anterior arch assimilation. In the control group, no patients had atlas assimilation. Anterior atlas assimilation leads to type I BI. Posterior atlas assimilation more frequently leads to type II BI. Separation in terms of anterior versus posterior atlas assimilation reflects a more accurate understanding of the clinical and embryological differences in craniocervical junction malformations. N/A.

Determining shapes and dimensions of dental arches for the use of straight-wire arches in lingual technique.

PubMed

Kairalla, Silvana Allegrini; Scuzzo, Giuseppe; Triviño, Tarcila; Velasco, Leandro; Lombardo, Luca; Paranhos, Luiz Renato

2014-01-01

This study aims to determine the shape and dimension of dental arches from a lingual perspective, and determine shape and size of a straight archwire used for lingual Orthodontics. The study sample comprised 70 Caucasian Brazilian individuals with normal occlusion and at least four of Andrew's six keys. Maxillary and mandibular dental casts were digitized (3D) and the images were analyzed by Delcam Power SHAPET 2010 software. Landmarks on the lingual surface of teeth were selected and 14 measurements were calculated to determine the shape and size of dental arches. Shapiro-Wilk test determined small arch shape by means of 25th percentile (P25%)--an average percentile for the medium arch; and a large one determined by means of 75th percentile (P75%). T-test revealed differences between males and females in the size of 12 dental arches. The straight-wire arch shape used in the lingual straight wire technique is a parabolic-shaped arch, slightly flattened on its anterior portion. Due to similarity among dental arch sizes shown by males and females, a more simplified diagram chart was designed.

Pennsylvanian history of the Chautauqua Arch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennison, A.P.

1993-03-01

Westward extension of the Ozark Uplift known as the Chautauqua Arch is concealed by a Pennsylvanian cover. This cover provides an insight into its later tectonic history subsequent to its major Late Devonian uplift and truncation. Part of this arch was episodically uplifted during Pennsylvanian time in an area extending west from southwestern Missouri along the Kansas-Oklahoma border to western Montgomery County. Recent stratigraphic mapping in that county indicates moderate Late Desmoinesian to Missourian tectonism. Some strata present on both flanks of the arch are either comparatively thin or missing owing to unconformity truncation or non-deposition. Stratal loss involves themore » Lenapah Limestone, the Hepler and Lost Branch formations, the Cherryvale Shale and the Hertha, Drum, Dewey, Stanton and Wyandotte Limestones. Earlier movements also account for the truncation of Morrowan, Atokan and possibly some Early Desmoinesian beds over the arch. Between tectonic episodes along the arch there were periods of relative tectonic quiescence accompanied by shelf-edge carbonate banks, condensed sequences and siliciclastic sedimentation. West of Montgomery County in Chautauqua County, the widespread Late Pennsylvanian Virgilian outcrops show practically no tectonism. Therefore, the name Chautauqua Arch seems inappropriate for this Pennsylvanian arch, and the name Tri-State Arch is proposed. This arch is bounded on the north by the Cherokee Basin and on the south by the northern rise of the Arkoma Basin. Although this arch is commonly omitted on many tectonic maps, it is a stronger gravity feature than the Bourbon Arch about 50 miles northward. Both tectonic and sedimentary structures have produced much oil and gas entrapment along this arch. For example, an east-west fault south of Independence, aligned with buried Proterozoic hills, has been specially productive.« less

10. DETAIL OF WEST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. DETAIL OF WEST ARCH, FROM ROADWAY, SHOWING ARCH RIB, HANGERS AND GUARDRAIL. VIEW TO SOUTH. - Rock Valley Bridge, Spanning North Timber Creek at Old U.S. Highway 30, Marshalltown, Marshall County, IA

Effect of Framework in an Implant-Supported Full-Arch Fixed Prosthesis: 3D Finite Element Analysis.

PubMed

Menini, Maria; Pesce, Paolo; Bevilacqua, Marco; Pera, Francesco; Tealdo, Tiziano; Barberis, Fabrizio; Pera, Paolo

2015-01-01

The aim of this study was to analyze through a three-dimensional finite element analysis (3D-FEA) stress distribution on four implants supporting a full-arch implant-supported fixed prosthesis (FFP) using different prosthesis designs. A 3D edentulous maxillary model was created and four implants were virtually placed into the maxilla and splinted, simulating an FFP without framework, with a cast metal framework, and with a carbon fiber framework. An occlusal load of 150 N was applied, stresses were transmitted into peri-implant bone, and prosthodontic components were recorded. 3D-FEA revealed higher stresses on the implants (up to +55.16%), on peri-implant bone (up to +56.93%), and in the prosthesis (up to +70.71%) when the full-acrylic prosthesis was simulated. The prosthesis with a carbon fiber framework showed an intermediate behavior between that of the other two configurations. This study suggests that the presence of a rigid framework in full-arch fixed prostheses provides a better load distribution that decreases the maximum values of stress at the levels of implants, prosthesis, and maxillary bone.

Gene networks, occlusal clocks, and functional patches: new understanding of pattern and process in the evolution of the dentition.

PubMed

Polly, P David

2015-05-01

Our understanding of the evolution of the dentition has been transformed by advances in the developmental biology, genetics, and functional morphology of teeth, as well as the methods available for studying tooth form and function. The hierarchical complexity of dental developmental genetics combined with dynamic effects of cells and tissues during development allow for substantial, rapid, and potentially non-linear evolutionary changes. Studies of selection on tooth function in the wild and evolutionary functional comparisons both suggest that tooth function and adaptation to diets are the most important factors guiding the evolution of teeth, yet selection against random changes that produce malocclusions (selectional drift) may be an equally important factor in groups with tribosphenic dentitions. These advances are critically reviewed here.

Permanent dentition occlusion in Chinese, Indian and Malay groups in Malaysia.

PubMed

Woon, K C; Thong, Y L; Abdul Kadir, R

1989-03-01

This survey outlines the proportion of the various features of occlusion in the permanent dentition of the three ethnic races, Chinese, Malay and Indian in Malaysia. The mean age of the high school children surveyed was 16.4 years. The Chinese and Malays had almost similar distribution of the different types of occlusion. There was a significantly higher prevalence of Class III occlusion among the Chinese and Malays as compared to the Indians. In addition, an edge to edge incisor relationship seemed to be a norm in the Chinese (54%) and Malays (50%) whilst the overjet of between 2-4 mm and the overbite of between 1/3 to 2/3 was more normal to Indians (50%). A crowded dentition was also a norm for the three races.

Clinical Course and Treatment of a Triplication Defect: A Case Report.

PubMed

Juneja, Suruchi; Verma, Kanika Gupta; Singh, Navneet; Sidhu, Gagandeep Kaur; Kaur, Navneet

2015-05-01

Fusion is an anomaly manifested in both deciduous and permanent dentitions. Fusion of dental tissues in the primary dentition is of clinical significance owing to the challenges in treatment of the affected teeth and aberrations encountered in development and eruption of their successors. Triple tooth refers to the union of three separate tooth entities. It can occur by fusion, germination, concrescence or a combination of both fusion and germination. Triplication is rarely encountered in the deciduous dentition. The case presented herein describes triplication of deciduous incisors and a supernumerary tooth. The diagnosis was confirmed with the help of radiographs, computed tomography (CT) imaging and histological examination. Retention of the triple tooth had led to crossbite. Extraction was performed for the triple tooth and crossbite was corrected using a composite inclined plane.

The genetic basis of modularity in the development and evolution of the vertebrate dentition.

PubMed Central

Stock, D W

2001-01-01

The construction of organisms from units that develop under semi-autonomous genetic control (modules) has been proposed to be an important component of their ability to undergo adaptive phenotypic evolution. The organization of the vertebrate dentition as a system of repeated parts provides an opportunity to study the extent to which phenotypic modules, identified by their evolutionary independence from other such units, are related to modularity in the genetic control of development. The evolutionary history of vertebrates provides numerous examples of both correlated and independent evolution of groups of teeth. The dentition itself appears to be a module of the dermal exoskeleton, from which it has long been under independent genetic control. Region-specific tooth loss has been a common trend in vertebrate evolution. Novel deployment of teeth and reacquisition of lost teeth have also occurred, although less frequently. Tooth shape differences within the dentition may be discontinuous (referred to as heterodonty) or graded. The occurrence of homeotic changes in tooth shape provides evidence for the decoupling of tooth shape and location in the course of evolution. Potential mechanisms for region-specific evolutionary tooth loss are suggested by a number of mouse gene knockouts and human genetic dental anomalies, as well as a comparison between fully-developed and rudimentary teeth in the dentition of rodents. These mechanisms include loss of a tooth-type-specific initiation signal, alterations of the relative strength of inductive and inhibitory signals acting at the time of tooth initiation and the overall reduction in levels of proteins required for the development of all teeth. Ectopic expression of tooth initiation signals provides a potential mechanism for the novel deployment or reacquisition of teeth; a single instance is known of a gene whose ectopic expression in transgenic mice can lead to ectopic teeth. Differences in shape between incisor and molar teeth in the mouse have been proposed to be controlled by the region-specific expression of signalling molecules in the oral epithelium. These molecules induce the expression of transcription factors in the underlying jaw mesenchyme that may act as selectors of tooth type. It is speculated that shifts in the expression domains of the epithelial signalling molecules might be responsible for homeotic changes in tooth shape. The observation that these molecules are regionally restricted in the chicken, whose ancestors were not heterodont, suggests that mammalian heterodonty may have evolved through the use of patterning mechanisms already acting on skeletal elements of the jaws. In general, genetic and morphological approaches identify similar types of modules in the dentition, but the data are not yet sufficient to identify exact correspondences. It is speculated that modularity may be achieved by gene expression differences between teeth or by differences in the time of their development, causing mutations to have cumulative effects on later-developing teeth. The mammalian dentition, for which virtually all of the available developmental genetic data have been collected, represents a small subset of the dental diversity present in vertebrates as a whole. In particular, teleost fishes may have a much more extensive dentition. Extension of research on the genetic control of tooth development to this and other vertebrate groups has great potential to further the understanding of modularity in the dentition. PMID:11604128

Influence of posterior dental arch length on brain activity during chewing in patients with mandibular distal extension removable partial dentures.

PubMed

Shoi, K; Fueki, K; Usui, N; Taira, M; Wakabayashi, N

2014-07-01

It is well known that shortened dental arch decreases masticatory function. However, its potential to change brain activity during mastication is unknown. The present study investigates the effect of a shortened posterior dental arch with mandibular removable partial dentures (RPDs) on brain activity during gum chewing. Eleven subjects with missing mandibular molars (mean age, 66.1 years) on both sides received experimental RPDs with interchangeable artificial molars in a crossover trial design. Brain activity during gum chewing with RPDs containing (full dental arch) and lacking artificial molars (shortened dental arch) was measured using functional magnetic resonance imaging. Additionally, masticatory function was evaluated for each dental arch type. Food comminuting and mixing ability and the perceived chewing ability were significantly lower in subjects with a shortened dental arch than those with a full dental arch (P < 0.05). Brain activation during gum chewing with the full dental arch occurred in the middle frontal gyrus, primary sensorimotor cortex extending to the pre-central gyrus, supplementary motor area, putamen, insula and cerebellum. However, middle frontal gyrus activation was not observed during gum chewing with the shortened dental arch. These results suggest that shortened dental arch affects human brain activity in the middle frontal gyrus during gum chewing, and the decreased middle frontal gyrus activation may be associated with decreased masticatory function. © 2014 John Wiley & Sons Ltd.

9. DETAIL OF EAST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. DETAIL OF EAST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ARTICULATED HANGER AND GUARDRAIL. VIEW TO SOUTHEAST. - Rock Valley Bridge, Spanning North Timber Creek at Old U.S. Highway 30, Marshalltown, Marshall County, IA

Properties of coronal arches

NASA Technical Reports Server (NTRS)

Davis, J. M.; Krieger, A. S.

1982-01-01

The properties of coronal arches located on the peripheries of active regions, observed during a sounding rocket flight on March 8, 1973, are discussed. The arches are found to overlie filament channels and their footpoints are traced on locations on the perimeters of supergranulation cells. The arches have a wide range of lengths although their widths are well approximated by the value 2.2 x 10 to the 9th cm. Comparison of the size of the chromospheric footprint with the arc width indicates that arches do not always expand as they ascend into the corona. The electron temperatures and densities of the plasma contained in the arches were measured and the pressure calculated; typical values are 2-million K, 1 x 10 to the 9th/cu cm, and 0.2 dyne/sq cm, respectively. The variation of these parameters with position along the length of the arch indicates that the arches are not in hydrostatic equilibrium.

The evolution of amphibian metamorphosis: insights based on the transformation of the aortic arches of Pelobates fuscus (Anura)

PubMed Central

Kolesová, Hana; Lametschwandtner, Alois; Roček, Zbyněk

2007-01-01

In order to gain insights into how the aortic arches changed during the transition of vertebrates to land, transformations of the aortic arches during the metamorphosis of Pelobates fuscus were investigated and compared with data from the early development of a recent ganoid fish Amia calva and a primitive caudate amphibian Salamandrella keyserlingi. Although in larval Pelobates, as in other non-pipid anurans, the gill arches serve partly as a filter-feeding device, their aortic arches maintain the original piscine-like arrangement, except for the mandibular and hyoid aortic arches which were lost. As important pre-adaptations for breathing of atmospheric oxygen occur in larval Pelobates (which have well-developed, though non-respiratory lungs and pulmonary artery), transformation of aortic arches during metamorphosis is fast. The transformation involves disappearance of the ductus Botalli, which results in a complete shunting of blood into the lungs and skin, disappearance of the ductus caroticus, which results in shunting of blood into the head through the arteria carotis interna, and disappearance of arch V, which results in shunting blood to the body through arch IV (systemic arch). It is supposed that the branching pattern of the aortic arches of permanently water-dwelling piscine ancestors, of intermediate forms which occasionally left the water and of primitive tetrapods capable of spending longer periods of time on land had been the same as in the prematamorphic anuran larvae or in some metamorphosed caudates in which the ductus caroticus and ductus Botalli were not interrupted, and arch V was still complete. PMID:17367494

The evolution of amphibian metamorphosis: insights based on the transformation of the aortic arches of Pelobates fuscus (Anura).

PubMed

Kolesová, Hana; Lametschwandtner, Alois; Rocek, Zbynek

2007-04-01

In order to gain insights into how the aortic arches changed during the transition of vertebrates to land, transformations of the aortic arches during the metamorphosis of Pelobates fuscus were investigated and compared with data from the early development of a recent ganoid fish Amia calva and a primitive caudate amphibian Salamandrella keyserlingi. Although in larval Pelobates, as in other non-pipid anurans, the gill arches serve partly as a filter-feeding device, their aortic arches maintain the original piscine-like arrangement, except for the mandibular and hyoid aortic arches which were lost. As important pre-adaptations for breathing of atmospheric oxygen occur in larval Pelobates (which have well-developed, though non-respiratory lungs and pulmonary artery), transformation of aortic arches during metamorphosis is fast. The transformation involves disappearance of the ductus Botalli, which results in a complete shunting of blood into the lungs and skin, disappearance of the ductus caroticus, which results in shunting of blood into the head through the arteria carotis interna, and disappearance of arch V, which results in shunting blood to the body through arch IV (systemic arch). It is supposed that the branching pattern of the aortic arches of permanently water-dwelling piscine ancestors, of intermediate forms which occasionally left the water and of primitive tetrapods capable of spending longer periods of time on land had been the same as in the prematamorphic anuran larvae or in some metamorphosed caudates in which the ductus caroticus and ductus Botalli were not interrupted, and arch V was still complete.

Standardizing Foot-Type Classification Using Arch Index Values

PubMed Central

Weil, Rich; de Boer, Emily

2012-01-01

ABSTRACT Purpose: The lack of a reliable classification standard for foot type makes drawing conclusions from existing research and clinical decisions difficult, since different foot types may move and respond to treatment differently. The purpose of this study was to determine interrater agreement for foot-type classification based on photo-box-derived arch index values. Method: For this correlational study with two raters, a sample of 11 healthy volunteers with normal to obese body mass indices was recruited from both a community weight-loss programme and a programme in physical therapy. Arch index was calculated using AutoCAD software from footprint photographs obtained via mirrored photo-box. Classification as high-arched, normal, or low-arched foot type was based on arch index values. Reliability of the arch index was determined with intra-class correlations; agreement on foot-type classification was determined using quadratic weighted kappa (κw). Results: Average arch index was 0.215 for one tester and 0.219 for the second tester, with an overall range of 0.017 to 0.370. Both testers classified 6 feet as low-arched, 9 feet as normal, and 7 feet as high-arched. Interrater reliability for the arch index was ICC=0.90; interrater agreement for foot-type classification was κw=0.923. Conclusions: Classification of foot type based on arch index values derived from plantar footprint photographs obtained via mirrored photo-box showed excellent reliability in people with varying BMI. Foot-type classification may help clinicians and researchers subdivide sample populations to better differentiate mobility, gait, or treatment effects among foot types. PMID:23729964

Antegrade versus retrograde cerebral perfusion for hemiarch replacement with deep hypothermic circulatory arrest: Does it matter? A propensity-matched analysis

PubMed Central

Ganapathi, Asvin M.; Hanna, Jennifer M.; Schechter, Matthew A.; Englum, Brian R.; Castleberry, Anthony W.; Gaca, Jeffrey G.; Hughes, G. Chad

2015-01-01

Objective The choice of cerebral perfusion strategy for aortic arch surgery has been debated, and the superiority of antegrade (ACP) or retrograde (RCP) cerebral perfusion has not been shown. We examined the early and late outcomes for ACP versus RCP in proximal (hemi-) arch replacement using deep hypothermic circulatory arrest (DHCA). Methods A retrospective analysis of a prospectively maintained database was performed for all patients undergoing elective and nonelective hemiarch replacement at a single referral institution from June 2005 to February 2013. Total arch cases were excluded to limit the analysis to shorter DHCA times and a more uniform patient population for whom clinical equipoise regarding ACP versus RCP exists. A total of 440 procedures were identified, with 360 (82%) using ACP and 80 (18%) using RCP. The endpoints included 30-day/in-hospital and late outcomes. A propensity score with 1:1 matching of 40 pre- and intraoperative variables was used to adjust for differences between the 2 groups. Results All 80 RCP patients were propensity matched to a cohort of 80 similar ACP patients. The pre- and intra-operative characteristics were not significantly different between the 2 groups after matching. No differences were found in 30-day/in-hospital mortality or morbidity outcomes. The only significant difference between the 2 groups was a shorter mean operative time in the RCP cohort (P = .01). No significant differences were noted in late survival (P = .90). Conclusions In proximal arch operations using DHCA, equivalent early and late outcomes can be achieved with RCP and ACP, although the mean operative time is significantly less with RCP, likely owing to avoidance of axillary cannulation. Questions remain regarding comparative outcomes with straight DHCA and lesser degrees of hypothermia. PMID:24908350

Branchial cleft anomalies: a pictorial review of embryological development and spectrum of imaging findings.

PubMed

Adams, Ashok; Mankad, Kshitij; Offiah, Curtis; Childs, Lucy

2016-02-01

The branchial arches are the embryological precursors of the face, neck and pharynx. Anomalies of the branchial arches are the second most common congenital lesions of the head and neck in children, with second branchial arch anomalies by far the most common. Clinically, these congenital anomalies may present as cysts, sinus tracts, fistulae or cartilaginous remnants with typical clinical and radiological findings. We review the normal embryological development of the branchial arches and the anatomical structures of the head and neck that derive from each arch. The typical clinical and radiological appearances of both common and uncommon branchial arch abnormalities are discussed with an emphasis on branchial cleft anomalies. • Anomalies of the branchial arches usually present as cysts, sinuses or fistulae. • Second branchial arch anomalies account for approximately 95 % of cases. • There are no pathognomonic imaging features so diagnosis depends on a high index of suspicion and knowledge of typical locations. • Persistent cysts, fistulae or recurrent localised infection may be due to branchial arch anomalies. • Surgical excision of the cyst or tract is the most common curative option.

3. View locking east of 591 foot steel arch of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. View locking east of 591 foot steel arch of bridge. Arch consists of Pratt trusses divided into twenty-four, 24 foot, 7 inch panels. It was fabricated by the King Iron Bridge Company of Cleveland whose circular plaque can be seen where the arch meets the roadway. The steel arch was erected by the Berro construction Co. of Chicago. - Detroit Superior High Level Bridge, Cleveland, Cuyahoga County, OH

Incidence of Branching Patterns Variations of the Arch in Aortic Dissection in Chinese Patients

PubMed Central

Tapia, G. Pullas; Zhu, Xiaohua; Xu, Jing; Liang, Pan; Su, Gang; Liu, Hai; Liu, Yang; Shu, Liliang; Liu, Shuiqi; Huang, Chen

2015-01-01

Abstract Several authors have described anatomic variations of the aortic arch in 13% to 20% of the patients who do not have aortic disease. However, few studies have evaluated these patterns in the thoracic aortic dissection (TAD). In the authors’ knowledge, this is the first survey that specifically investigates the frequency of these variations in a broad, nonselected group of Chinese patients with aortic dissection. Furthermore, it compares this group with a group of patients without aortic disease. The objective of this study was to define the variation frequency of the aortic arch branches pattern using the tomographic studies of 525 Chinese patients with a diagnosis of TAD. The Stanford classification was used to set the site of the initial tear of the dissection. In addition, we performed an epidemiological analysis of the aortic arch anatomic variations in TAD, and its possible implications for surgical or endovascular treatment. The general hypothesis proposal asserted that Chinese patients with dissection of the aorta have a similar incidence of variations of the aortic arch to the patients without aortic disease. A retrospective study of cases and controls was carried out using the tomographic studies (CT) of all patients admitted to the First Affiliated Hospital of Zhengzhou University, located at Henan-China, with a confirmed diagnosis of aortic dissection from January 2012 until December 2014. The group of cases consisted of 525 patients: 374 men and 151 women, with a mean age of 52.27 years (range, 20–89). The average age of the patients with Stanford A and B aortic dissection was 49.46 and 53.67, respectively. The control group consisted of 525 unselected patients without TAD who underwent a CT scan of the chest due to other indications. This group consisted of 286 men and 239 women, with a mean age of 53.60 years (range, 18–89). All the patients with aneurysm or dissection were excluded from the control group. We performed a statistical analysis of demographic data. The study found 7 different patterns of the aortic arch on both groups of cases and controls. Within the 525 patients with TAD were observed 85 (16.19%) anatomical variations, while the control group showed 112 variations (21.33%); P = 0.033. The most common anatomical variant was the bovine arch, found in 62 (11.80%) cases of TAD compared with 77 (14.66%) in the control group; P = 0.172. Anatomical variations were observed in 14.32% of the patients with Stanford A dissection and 17.09% of the patients with Stanford B dissection; P = 0.425. Patients with Stanford A dissection showed the pattern of bovine arch in 23 (13.21%) of 174 cases. In contrast, the patients with Stanford B dissection showed it in 39 (11.11%) of 351 cases; P = 0.481. The anatomical variant defined as vertebral artery of direct origin of the aortic arch was more frequent in the patients with Stanford B dissection (5.12%). The patients with Stanford A dissection presented this pattern in 1.14% of the cases; P = 0.025. This study observed an increased frequency of aortic dissection in the subgroup from 41 to 60 years old. In the subgroup from 41 to 60 years old without TAD, a greater frequency of anatomical variations were found than in the patients with TAD (20.81% vs 14.23%; P = 0.050). The same fashion was seen in patients older than 80 years (27.27% vs 0%; P = 0.030). The anatomical variations of the aortic arch with TAD occurred in 14.97% of the male patients and 19.20% of the female patients compared to 21.67% to 20.92% in the control group; P = 0.026 and P = 0.681, respectively. The aortic arch variations were found less frequently in the TAD group than in the control group in the present Chinese series. The bovine arch was considered the variant pattern of the major frequency in the patients with TAD and the control group. The anatomical variant of 4 branches, defined as vertebral artery of direct origin of the aortic arch, was more frequent in patients with Stanford B aortic dissection than in the patients with Stanford A. This finding might show an association between the geometry of the aortic arch and the site of onset of first intimal tear of dissection. PMID:25929931

Incidence of branching patterns variations of the arch in aortic dissection in Chinese patients.

PubMed

Tapia, G Pullas; Zhu, Xiaohua; Xu, Jing; Liang, Pan; Su, Gang; Liu, Hai; Liu, Yang; Shu, Liliang; Liu, Shuiqi; Huang, Chen

2015-05-01

Several authors have described anatomic variations of the aortic arch in 13% to 20% of the patients who do not have aortic disease. However, few studies have evaluated these patterns in the thoracic aortic dissection (TAD). In the authors' knowledge, this is the first survey that specifically investigates the frequency of these variations in a broad, nonselected group of Chinese patients with aortic dissection. Furthermore, it compares this group with a group of patients without aortic disease.The objective of this study was to define the variation frequency of the aortic arch branches pattern using the tomographic studies of 525 Chinese patients with a diagnosis of TAD. The Stanford classification was used to set the site of the initial tear of the dissection. In addition, we performed an epidemiological analysis of the aortic arch anatomic variations in TAD, and its possible implications for surgical or endovascular treatment. The general hypothesis proposal asserted that Chinese patients with dissection of the aorta have a similar incidence of variations of the aortic arch to the patients without aortic disease.A retrospective study of cases and controls was carried out using the tomographic studies (CT) of all patients admitted to the First Affiliated Hospital of Zhengzhou University, located at Henan-China, with a confirmed diagnosis of aortic dissection from January 2012 until December 2014. The group of cases consisted of 525 patients: 374 men and 151 women, with a mean age of 52.27 years (range, 20-89). The average age of the patients with Stanford A and B aortic dissection was 49.46 and 53.67, respectively. The control group consisted of 525 unselected patients without TAD who underwent a CT scan of the chest due to other indications. This group consisted of 286 men and 239 women, with a mean age of 53.60 years (range, 18-89). All the patients with aneurysm or dissection were excluded from the control group. We performed a statistical analysis of demographic data.The study found 7 different patterns of the aortic arch on both groups of cases and controls. Within the 525 patients with TAD were observed 85 (16.19%) anatomical variations, while the control group showed 112 variations (21.33%); P = 0.033. The most common anatomical variant was the bovine arch, found in 62 (11.80%) cases of TAD compared with 77 (14.66%) in the control group; P = 0.172. Anatomical variations were observed in 14.32% of the patients with Stanford A dissection and 17.09% of the patients with Stanford B dissection; P = 0.425. Patients with Stanford A dissection showed the pattern of bovine arch in 23 (13.21%) of 174 cases. In contrast, the patients with Stanford B dissection showed it in 39 (11.11%) of 351 cases; P = 0.481. The anatomical variant defined as vertebral artery of direct origin of the aortic arch was more frequent in the patients with Stanford B dissection (5.12%). The patients with Stanford A dissection presented this pattern in 1.14% of the cases; P = 0.025. This study observed an increased frequency of aortic dissection in the subgroup from 41 to 60 years old. In the subgroup from 41 to 60 years old without TAD, a greater frequency of anatomical variations were found than in the patients with TAD (20.81% vs 14.23%; P = 0.050). The same fashion was seen in patients older than 80 years (27.27% vs 0%; P = 0.030). The anatomical variations of the aortic arch with TAD occurred in 14.97% of the male patients and 19.20% of the female patients compared to 21.67% to 20.92% in the control group; P = 0.026 and P = 0.681, respectively.The aortic arch variations were found less frequently in the TAD group than in the control group in the present Chinese series. The bovine arch was considered the variant pattern of the major frequency in the patients with TAD and the control group. The anatomical variant of 4 branches, defined as vertebral artery of direct origin of the aortic arch, was more frequent in patients with Stanford B aortic dissection than in the patients with Stanford A.This finding might show an association between the geometry of the aortic arch and the site of onset of first intimal tear of dissection.

Caries prevalence in different racial groups of schoolchildren in West Malaysia.

PubMed

Yassin, I; Low, T

1975-08-01

A dental health survey of 15,197 schoolchildren age 6-18 years was conducted in West Malaysia. The caries experience in the permanent teeth of the three racial groups, namely Malay, Chinese and Indian/Pakistani, showed a distinct variation. The prevalence was highest among the Chinese children, being about twice that of the Malay and Indian/Pakistani children. In the primary dentition, however, the caries experience in the three racial groups was comparable. An analysis of the factors contributing to the racial variation showed that dietary influence was not the only factor responsible. The possibility of a racial variation in caries susceptibility has been postulated. In the primary dentition the similar caries experience observed in the three groups of children was most probably due to the widespread occurrence of rampant caries which would heavily weight the dift score of the children in all three groups. The need to fluoridate the public water supply as an effective preventive measure is emphasized.

Comparison of arch forms between Egyptian and North American white populations.

PubMed

Bayome, Mohamed; Sameshima, Glenn T; Kim, Yoonji; Nojima, Kunihiko; Baek, Seung-Hak; Kook, Yoon-Ah

2011-03-01

The aim of this study was to evaluate the morphologic differences in the mandibular arches of Egyptian and North American white subjects. The sample included 94 Egyptian subjects (35 Class I, 32 Class II, and 27 Class III) and 92 white subjects (37 Class I, 29 Class II, and 26 Class III). The subjects were grouped according to arch form types (tapered, ovoid, and square) to compare their frequency distribution between ethnic groups in each Angle classification. The most facial portions of 13 proximal contact areas were digitized on scanned images of mandibular casts to estimate the corresponding clinical bracket point for each tooth. Four linear and 2 proportional measurements were taken. In comparing arch dimensions, intermolar width was narrower in Egyptians than in the whites (P = 0.001). There was an even frequency distribution of the 3 arch forms in the Egyptian group. On the other hand, the most frequent arch form was ovoid followed by tapered and square in the white group; the square arch form was significantly less frequent than the tapered and ovoid arch forms (P = 0.029). The arch forms of Egyptians are narrower than those of whites. The distribution of the arch form types in Egyptians showed similar frequency, but the square arch form was less frequent in whites. It is recommended to select narrower archwires from the available variations to suit many Egyptian patients. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

3. VIEW OF DOWNSTREAM ARCHES. MASONRY ABOVE ARCHES IN THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW OF DOWNSTREAM ARCHES. MASONRY ABOVE ARCHES IN THE SPANDREL WALL IS LAID IN A SEMI-COURSED RUBBLE PATTERN. - Core Creek County Bridge, Spanning Core Creek, approximately 1 mile South of State Route 332 (Newtown Bypass), Newtown, Bucks County, PA

Aortic Elongation and Stanford B Dissection: The Tübingen Aortic Pathoanatomy (TAIPAN) Project.

PubMed

Lescan, M; Veseli, K; Oikonomou, A; Walker, T; Lausberg, H; Blumenstock, G; Bamberg, F; Schlensak, C; Krüger, T

2017-08-01

Aortic elongation has not yet been considered as a potential risk factor for Stanford type B dissection (TBD). The role of both aortic elongation and dilatation in patients with TBD was evaluated. The aortic morphology of a healthy control group (n = 236) and patients with TBD (n = 96) was retrospectively examined using three dimensional computed tomography imaging. Curved multiplanar reformats were used to examine aortic diameters at defined landmarks and aortic segment lengths. Diameters at all landmarks were significantly larger in the TBD group. The greatest diameter difference (56%) was measured in dissected descending aortas (p < .001). The segment with the most considerable difference between the study groups with regard to elongation was the non-dissected aortic arch of patients with TBD (36%; p < .001). Elongation in the aortic arch was accompanied by a diameter increase of 21% (p < .001). In receiver-operating curve analysis, the area under the curve was .85 for the diameter and .86 for the length of the aortic arch. In addition to dilatation, aortic arch elongation is associated with the development of TBD. The diameter and length of the non-dissected aortic arch may be predictive for TBD and may possibly be used for risk assessment in the future. This study provides the basis for further prospective evaluation of these parameters. Copyright © 2017 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Evolution of the hypercarnivorous dentition in mammals (Metatheria, Eutheria) and its bearing on the development of tribosphenic molars.

PubMed

Solé, Floréal; Ladevèze, Sandrine

2017-03-01

One major innovation of mammals is the tribosphenic molar, characterized by the evolution of a neomorphic upper cusp (=protocone) and a lower basin (=talonid) that occlude and provide shearing and crushing functions. This type of molar is an evolutionarily flexible structure that enabled mammals to achieve complex dental adaptations. Among carnivorous mammals, hypercarnivory is a common trend that evolved several times among therians (marsupials, placentals, and stem relatives). Hypercarnivory involves an important simplification of the carnassial molar pattern from the ancestral tribosphenic molar pattern, with the modification of the triangular tooth crown, and the loss of several cusps and cuspids typical of the tribosphenic molar. These losses confer to the molars of the hypercarnivorous mammals a plesiomorphic/paedomorphic morphology that resembles more the earliest mammaliaforms than the earliest therians. Here, we demonstrate that the modification of the molar morphology is fully explained by a patterning cascade mode of cusp development. Contrary to what was previously proposed, our study concludes that the metaconid (mesiolingual cusp of lower molars, associated with a puncturing function) does not influence cusp development of the talonid (distal crushing heel of lower molars). Moreover, it provides a new example of how heterochronic changes were crucial to the evolution of mammal dentition. To overcome the difficulty of applying behavioral or ecological definitions of diets to fossil animals, we characterize hypercarnivorous dentitions on the basis of the molar morphology and more particularly on the loss or retention of crushing structures, each dentition resulting from adaptations to a distinct ecomorphotype. Despite repeated and convergent evolution of hypercarnivorous forms, hypercarnivory appears as a highly constrained specialization (i.e., "dead end") that is unlikely to evolve back to omnivorous dentition, especially when the crushing structures are lost. © 2017 Wiley Periodicals, Inc.

Survival of European mouflon (Artiodactyla: Bovidae) in Hawai'i based on tooth cementum lines

USGS Publications Warehouse

Hess, S.C.; Stephens, R.M.; Thompson, T.L.; Danner, R.M.; Kawakami, B.

2011-01-01

Reliable techniques for estimating age of ungulates are necessary to determine population parameters such as age structure and survival. Techniques that rely on dentition, horn, and facial patterns have limited utility for European mouflon sheep (Ovis gmelini musimon), but tooth cementum lines may offer a useful alternative. Cementum lines may not be reliable outside temperate regions, however, because lack of seasonality in diet may affect annulus formation. We evaluated the utility of tooth cementum lines for estimating age of mouflon in Hawai'i in comparison to dentition. Cementum lines were present in mouflon from Mauna Loa, island of Hawai'i, but were less distinct than in North American sheep. The two age-estimation methods provided similar estimates for individuals aged ???3 yr by dentition (the maximum age estimable by dentition), with exact matches in 51% (18/35) of individuals, and an average difference of 0.8 yr (range 04). Estimates of age from cementum lines were higher than those from dentition in 40% (14/35) and lower in 9% (3/35) of individuals. Discrepancies in age estimates between techniques and between paired tooth samples estimated by cementum lines were related to certainty categories assigned by the clarity of cementum lines, reinforcing the importance of collecting a sufficient number of samples to compensate for samples of lower quality, which in our experience, comprised approximately 22% of teeth. Cementum lines appear to provide relatively accurate age estimates for mouflon in Hawai'i, allow estimating age beyond 3 yr, and they offer more precise estimates than tooth eruption patterns. After constructing an age distribution, we estimated annual survival with a log-linear model to be 0.596 (95% CI 0.5540.642) for this heavily controlled population. ?? 2011 by University of Hawai'i Press.

[Dental age in the relation with nutrition model of school children from swimming classes of championship school].

PubMed

Dyras, Marta; Lyszczarz, Justyna; Wójtowicz, Barbara; Jankowska, Katarzyna

2002-01-01

The aim of this work was the comparison of calendar age with dental age in the aspect of basic nutritional ingredients intake with precise taking into consideration microelements, macroelements and vitamins. 79 schoolchildren from swimming classes of championship school in Cracow aged 10-13 were included in the examination. Among this group of pupils 24-hour recall and complex dental examination including the estimation of dental status, the hygienic status of oral cavity were conducted and the presence of dental and occlusion defects were estimated. 24-hour recall including 3 following days contained the number of products in every meal, the number of meals and the time of their consumption. The schoolchildren were divided into 3 groups on the ground of the difference between dental and calendar age. Dentition on time (no more than 5 months difference between dental and calendar age) was stated by 25 pupils--group I. Accelerated dentition of fixed teeth was observed by 36 pupils--group II and delayed dentition by 18 persons--group III. In all groups lower than safe calcium intake (80% of pupils from these groups) and iron intake (55%) was noticed. In the range of left micro- and macroelements the disturbances in nutritional status were mainly stated bypersons with delayed dentition. The shortages in Magnesium intake concerned 67% of school children and in Zinc intake--72%. In the group of schoolchildren with accelerated dentition these shortages were about 40%. In the range of vitamins intake low niacin intake (39% of schoolchildren) and riboflavin intake (25%) were stated. The differences among these groups were observed only in thiamine intake (33% from group II and 19% from group III). In the group III more often low energetic value of daily nutrient intake was stated.

Calcification at orifices of aortic arch branches is a reliable and significant marker of stenosis at carotid bifurcation and intracranial arteries.

PubMed

Yamada, Shigeki; Hashimoto, Kenji; Ogata, Hideki; Watanabe, Yoshihiko; Oshima, Marie; Miyake, Hidenori

2014-02-01

Simple rating scale for calcification in the cervical arteries and the aortic arch on multi-detector computed tomography angiography (MDCTA) was evaluated its reliability and validity. Additionally, we investigated where is the most representative location for evaluating the calcification risk of carotid bifurcation stenosis and atherosclerotic infarction in the overall cervical arteries covering from the aortic arch to the carotid bifurcation. The aortic arch and cervical arteries among 518 patients (292 men, 226 women) were evaluated the extent of calcification using a 4-point grading scale for MDCTA. Reliability, validity and the concomitant risk with vascular stenosis and atherosclerotic infarction were assessed. Calcification was most frequently observed in the aortic arch itself, the orifices from the aortic arch, and the carotid bifurcation. Compared with the bilateral carotid bifurcations, the aortic arch itself had a stronger inter-observer agreement for the calcification score (Fleiss' kappa coefficients; 0.77), but weaker associations with stenosis and atherosclerotic infarction. Calcification at the orifices of the aortic arch branches had a stronger inter-observer agreement (0.74) and enough associations with carotid bifurcation stenosis and intracranial stenosis. In addition, the extensive calcification at the orifices from the aortic arch was significantly associated with atherosclerotic infarction, similar to the calcification at the bilateral carotid bifurcations. The orifices of the aortic arch branches were the novel representative location of the aortic arch and overall cervical arteries for evaluating the calcification extent. Thus, calcification at the aortic arch should be evaluated with focus on the orifices of 3 main branches. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Post-Flare Giant Arches - Unanswered Questions

NASA Astrophysics Data System (ADS)

West, M. J.; Seaton, D. B.; Dennis, B. R.; Palmerio, E.; Savage, S. L.

2017-12-01

Recent observations from the SWAP EUV imager on-board PROBA2 and SXI X-ray observations from the GOES satellite have shown that post-flare giant arches and regular post-flare loops are one and the same thing. However, it is still not clear how certain loop systems are able to sustain prolonged growth to heights greater than half a solar-radii. In this presentation we further explore the energy deposition rate above post-flare loop systems through high-energy RHESSI observations. We also explore the difference between the growth of different loop systems through an epoch analysis. The epoch analysis is initially performed over the period when the STEREO satellites were in quadrature with PROBA2 allowing us to assess the difference between their on-disk and on-limb signatures. Giant arches are generally characterised by their height of growth when observed close to the solar limb, but due to the optically thin nature of the EUV solar atmosphere, projection effects and the scarcity of events occurring within 5 degrees of the limb it is not understood how common these events are. Using the analysis during the quadrature period we gain a better understanding of how rare these events are, and by determining characteristic on disk signatures we can combine our data set with magnetogram observations to better understand their magnetic evolution.

A systematic review and meta-analysis of variations in branching patterns of the adult aortic arch.

PubMed

Popieluszko, Patrick; Henry, Brandon Michael; Sanna, Beatrice; Hsieh, Wan Chin; Saganiak, Karolina; Pękala, Przemysław A; Walocha, Jerzy A; Tomaszewski, Krzysztof A

2018-07-01

The aortic arch (AA) is the main conduit of the left side of the heart, providing a blood supply to the head, neck, and upper limbs. As it travels through the thorax, the pattern in which it gives off the branches to supply these structures can vary. Variations of these branching patterns have been studied; however, a study providing a comprehensive incidence of these variations has not yet been conducted. The objective of this study was to perform a meta-analysis of all the studies that report prevalence data on AA variants and to provide incidence data on the most common variants. A systematic search of online databases including PubMed, Embase, Scopus, ScienceDirect, Web of Science, SciELO, BIOSIS, and CNKI was performed for literature describing incidence of AA variations in adults. Studies including prevalence data on adult patients or cadavers were collected and their data analyzed. A total of 51 articles were included (N = 23,882 arches). Seven of the most common variants were analyzed. The most common variants found included the classic branching pattern, defined as a brachiocephalic trunk, a left common carotid, and a left subclavian artery (80.9%); the bovine arch variant (13.6%); and the left vertebral artery variant (2.8%). Compared by geographic data, bovine arch variants were noted to have a prevalence as high as 26.8% in African populations. Although patients who have an AA variant are often asymptomatic, they compose a significant portion of the population of patients and pose a greater risk of hemorrhage and ischemia during surgery in the thorax. Because of the possibility of encountering such variants, it is prudent for surgeons to consider potential variations in planning procedures, especially of an endovascular nature, in the thorax. Copyright © 2017 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Using ArchE in the Classroom: One Experience

DTIC Science & Technology

2007-09-01

The Architecture Expert (ArchE) tool serves as a software architecture design assistant. It embodies knowledge of quality attributes and the relation...between the achievement of quality attribute requirements and architecture design . This technical note describes the use of a pre-alpha release of

Oral health status of children with special health care needs receiving dental treatment under general anesthesia at the dental clinic of Taipei Veterans General Hospital in Taiwan.

PubMed

Chen, Chia-Yu; Chen, Ya-Wei; Tsai, Tzong-Ping; Shih, Wen-Yu

2014-04-01

Oral health is crucial to individual growth and development. However, oral health care is often overlooked in children with special health care needs (CSHCN). We investigated current oral health status and unmet dental needs of CSHCN in Taiwan. We performed a retrospective study of consecutive CSHCN cases receiving first-time comprehensive dental treatment under general anesthesia at Taipei Veterans General hospital from 2001 to 2010. We retrieved clinical data including age, sex, types, and severity of disability, caries experience index [decayed, extracted, and filled teeth (deft) index for primary dentition/decayed, missing, and filled teeth (DMFT) index for permanent dentition], malocclusion, and treatment modalities from medical charts for analysis. The correlation between different groups of CSHCN regarding the deft/DMFT indices and treatment modalities was analyzed statistically. Our study included 96 children, ranging in age from 2.4 years to 14.3 years (mean age 6.8 ± 3.3 years). The deft/DMFT index was significantly higher in the younger age group (2-6 years; 13.8 ± 4.3) compared with the older group (> 6 years; 10.5 ± 5.3; p < 0.001). The mean number of total treated teeth was 14.2 ± 3.8, and no differences existed among disability groups (p = 0.528) and age groups (p = 0.992). For the treatment modality, the number of pulp therapies with crown restoration was higher in the younger age group than in the older group. At the time of the study, 53 CSHCN had reached their full permanent dentition. We observed significantly more malocclusion of full permanent dentition in the older age group (91%) than in the younger group (35%; p < 0.001). Unmet dental needs and caries experience indices remain high in CSHCN, regardless of the types and severity of disability. However, the younger the age at which CSHCN received their first dental treatment, the more effective the dental rehabilitation was. Parental education regarding early dental intervention and a preventive approach for enhanced oral care is mandatory. Copyright © 2014. Published by Elsevier B.V.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, R.N.; Robinson, H.; Klauer, A. A.

The essential RNA helicase, Mtr4, performs a critical role in RNA processing and degradation as an activator of the nuclear exosome. The molecular basis for this vital function is not understood and detailed analysis is significantly limited by the lack of structural data. In this study, we present the crystal structure of Mtr4. The structure reveals a new arch-like domain that is specific to Mtr4 and Ski2 (the cytosolic homologue of Mtr4). In vivo and in vitro analyses demonstrate that the Mtr4 arch domain is required for proper 5.8S rRNA processing, and suggest that the arch functions independently of canonicalmore » helicase activity. In addition, extensive conservation along the face of the putative RNA exit site highlights a potential interface with the exosome. These studies provide a molecular framework for understanding fundamental aspects of helicase function in exosome activation, and more broadly define the molecular architecture of Ski2-like helicases.« less

Non-linear heterogeneous FE approach for FRP strengthened masonry arches

NASA Astrophysics Data System (ADS)

Bertolesi, Elisa; Milani, Gabriele; Fedele, Roberto

2015-12-01

A fast and reliable non-linear heterogeneous FE approach specifically conceived for the analysis of FRP-reinforced masonry arches is presented. The approach proposed relies into the reduction of mortar joints to interfaces exhibiting a non-linear holonomic behavior, with a discretization of bricks by means of four-noded elastic elements. The FRP reinforcement is modeled by means of truss elements with elastic-brittle behavior, where the peak tensile strength is estimated by means of a consolidated approach provided by the Italian guidelines CNR-DT200 on masonry strengthening with fiber materials, where the delamination of the strip from the support is taken into account. The model is validated against some recent experimental results relying into circular masonry arches reinforced at both the intrados and the extrados. Some sensitivity analyses are conducted varying the peak tensile strength of the trusses representing the FRP reinforcement.

Modeling Philippine Stock Exchange Composite Index Using Time Series Analysis

NASA Astrophysics Data System (ADS)

Gayo, W. S.; Urrutia, J. D.; Temple, J. M. F.; Sandoval, J. R. D.; Sanglay, J. E. A.

2015-06-01

This study was conducted to develop a time series model of the Philippine Stock Exchange Composite Index and its volatility using the finite mixture of ARIMA model with conditional variance equations such as ARCH, GARCH, EG ARCH, TARCH and PARCH models. Also, the study aimed to find out the reason behind the behaviorof PSEi, that is, which of the economic variables - Consumer Price Index, crude oil price, foreign exchange rate, gold price, interest rate, money supply, price-earnings ratio, Producers’ Price Index and terms of trade - can be used in projecting future values of PSEi and this was examined using Granger Causality Test. The findings showed that the best time series model for Philippine Stock Exchange Composite index is ARIMA(1,1,5) - ARCH(1). Also, Consumer Price Index, crude oil price and foreign exchange rate are factors concluded to Granger cause Philippine Stock Exchange Composite Index.

Multidisciplinary Treatment Approach in a Patient with History of Nasopharyngeal Carcinoma

PubMed Central

Yavuz, Atacan; Ağralı, Ömer Birkan; Çalışkan, Zeynep Lale; Türkaydın, Dilek; Sertgöz, Atilla; Doğan, Başak

2014-01-01

Radiotherapy in NPC patients has side effects on the dentition, which affects quality of life dramatically. This case report presents multidisciplinary dental treatment approach in a 17-year-old male patient with a history of nasopharyngeal carcinoma (NPC), which was treated with chemotherapy and radiotherapy. The adolescent patient applied to dental hospital 4 years after the radiotherapy with aesthetic and functional problems on dentition affecting psychological, social, and physical aspects of his life. The dentition of the patient demonstrated the severe destruction as a devastating side effect of radiotherapy. With a successful multidisciplinary approach, our patient's aesthetics, function, and self-confidence were obtained. Well-established procedures, which include preventative care and maintenance, can reduce the duration and expenses of the treatment and help in challenging the life-long complications of radiotherapy. PMID:24523971

Pendulum Therapy of Molar Distalization in Mixed Dentition.

PubMed

Patil, Raju Umaji; Prakash, Amit; Agarwal, Anshu

2016-01-01

Early and timely pedo-orthodontic treatment is aimed at eliminating the disturbances of skeletal or dentoalveolar development, to harmonize the stomatognathic system before the full eruption of all permanent teeth. The advantages of pendulum appliance are its minimal dependence on patient's compliance (child cooperation), ease of fabrication, onetime activation and adjustment of the springs if necessary to correct minor transverse and vertical molar positions. This article reports a successful treatment method of class II malocclusion with pendulum appliance in mixed dentition phase. Distalization of maxillary molar was done, followed by guidance of canine impaction orthodontically and other dental correction using 0.022 MBT appliances. Posttreatment results were stable and remarkable. How to cite this article: Patil RU, Prakash A, Agarwal A. Pendulum Therapy of Molar Distalization in Mixed Dentition. Int J Clin Pediatr Dent 2016;9(1):67-73.

Pendulum Therapy of Molar Distalization in Mixed Dentition

PubMed Central

Prakash, Amit; Agarwal, Anshu

2016-01-01

ABSTRACT Early and timely pedo-orthodontic treatment is aimed at eliminating the disturbances of skeletal or dentoalveolar development, to harmonize the stomatognathic system before the full eruption of all permanent teeth. The advantages of pendulum appliance are its minimal dependence on patient’s compliance (child cooperation), ease of fabrication, onetime activation and adjustment of the springs if necessary to correct minor transverse and vertical molar positions. This article reports a successful treatment method of class II malocclusion with pendulum appliance in mixed dentition phase. Distalization of maxillary molar was done, followed by guidance of canine impaction orthodontically and other dental correction using 0.022 MBT appliances. Posttreatment results were stable and remarkable. How to cite this article: Patil RU, Prakash A, Agarwal A. Pendulum Therapy of Molar Distalization in Mixed Dentition. Int J Clin Pediatr Dent 2016;9(1):67-73. PMID:27274159

Cross-sectional growth changes in skeletal and soft tissue cephalometric landmarks of children.

PubMed

Inada, Emi; Saitoh, Issei; Hayasaki, Haruaki; Yamada, Chiaki; Iwase, Yoko; Takemoto, Yoshihiko; Matsumoto, Yuko; Yamasaki, Youichi

2008-07-01

In order to provide standard values for craniofacial growth of normal children, we evaluated the growth changes of skeletal and soft tissue cephalometric landmarks from lateral cephalograms of 180 Japanese children. They were divided into three groups: primary dentition, mixed dentition, and permanent dentition. Specific skeletal angles and distances showed significant gender differences with increasing age. The only significant soft tissue gender difference was nose height in the oldest group. Upper pharynx dimension and nose height differed significantly among the groups in both genders. Positions of both the upper and lower lip changed significantly between the intermediate and oldest groups of both genders. Nasolabial angle did not change significantly with growth. The results of this study should be useful for predicting craniofacial growth and development or determining the effect of orthodontic treatment.

Comparative Study on Different Slot Forms of Prestressed Anchor Blocks

NASA Astrophysics Data System (ADS)

Fan, Rong; Si, Jianhui; Jian, Zheng

2018-03-01

In this paper, two models of prestressed pier, rectangular cavity anchor block and arch hollow anchor block are established. The ABAQUS software was used to calculate the stress of the surface of the neck of the pier and the cavity of the anchor block, through comparative analysis. The results show that compared with the rectangular cavity anchor block, the stress of the pier and the cavity can be effectively reduced when the arch hole is used, and the amount of prestressed anchor can be reduced, so as to obtain obvious economic benefits.

A case of complete double aortic arch visualized by transthoracic echocardiography.

PubMed

Saito, Naka; Kato, Shingo; Saito, Noritaka; Nakachi, Tatsuya; Fukui, Kazuki; Iwasawa, Tae; Kosuge, Masami; Kimura, Kazuo

2017-08-01

A case of double aortic arch that was well visualized using transthoracic echocardiography is reported. A 38-year-old man underwent transthoracic echocardiography for the evaluation of dyspnea. A suprasternal view of transthoracic echocardiography showed the ascending aorta bifurcate to left and right aortic arches, with blood flow from the ascending aorta to bilateral aortic arches. The diagnosis of right side-dominant double aortic arch was made, and the patient's symptom was conceivably related to compression of the trachea due to a vascular ring. This report indicates the potential usefulness of transthoracic echocardiography for noninvasive detection of double aortic arch in adults. © 2017, Wiley Periodicals, Inc.

[Effects of shortened mandibular dental arch on human brain activity during chewing: an fMRI study].

PubMed

Shoi, Kazuhito

2014-03-01

According to the shortened dental arch concept, missing molars should not always be restored with prosthetic treatment. A shortened dental arch with missing molars is associated with a decrease in masticatory function. However, it is not known whether a shortened dental arch influences brain activity during chewing. This study aimed to clarify the effect of posterior arch length of mandibular bilateral distal extension removable partial dentures (RPDs) on brain activity during chewing. Eleven subjects with bilaterally missing mandibular molars (mean age, 66.1 years) participated in the study. RPDs with full dental arch and shortened dental arch were fabricated and brain activity during gum chewing under each dental condition was measured using functional magnetic resonance imaging. Brain activation during gum chewing with the full dental arch was observed in the middle frontal gyrus, primary sensorimotor cortex extending to the premotor cortex, supplementary motor area, putamen, insula and cerebellum. However, activation of the middle frontal gyrus was not observed during gum chewing with the shortened dental arch. The results of this study suggest that human brain activity during chewing in the middle frontal gyrus may be associated with chewing in the presence of the molar region.

In elective arch surgery with circulatory arrest, does the arterial cannulation site really matter? A propensity score analysis of right axillary and innominate artery cannulation.

PubMed

Preventza, Ourania; Price, Matt D; Spiliotopoulos, Konstantinos; Amarasekara, Hiruni S; Cornwell, Lorraine D; Omer, Shuab; de la Cruz, Kim I; Zhang, Qianzi; Green, Susan Y; LeMaire, Scott A; Rosengart, Todd K; Coselli, Joseph S

2018-05-01

The preferred arterial cannulation site for elective proximal aortic procedures requiring circulatory arrest varies, and different sites have been tried. We evaluated the relationships between arterial cannulation site and adverse outcomes, including stroke, in patients undergoing elective aortic arch surgery. We reviewed the records of 938 patients who underwent elective hemiarch or total arch surgery with circulatory arrest between 2006 and 2016. Five cannulation sites were used: the right axillary (n = 515; 54.9%), innominate (n = 376; 40.1%), and right common carotid arteries (n = 15; 1.6%), each with a side graft; the ascending aorta (n = 19; 2.0%); and the femoral artery (n = 13; 1.4%). Multivariable logistic regression analysis was used to model the effects of cannulation site on adverse outcomes for the entire cohort and for a subcohort of 891 patients who underwent innominate or axillary artery cannulation. Propensity-matching yielded 564 patients (282 pairs) from the right axillary and innominate artery groups. For the entire cohort, mortality, stroke, and composite adverse outcome (operative death or persistent stroke or renal failure at hospital discharge) rates were 7.0%, 4.1%, and 9.8%. In the multivariable analysis of the axillary/innominate subcohort, cannulation site did not independently predict operative mortality, persistent stroke, or composite adverse event. These results were confirmed with the propensity-matched analysis, where both axillary and innominate artery cannulation provided equivalent composite adverse event rates, operative death rates, and overall stroke rates. During elective arch surgery, right axillary artery cannulation and innominate artery cannulation (both via a side graft) produce excellent results and can be used interchangeably. Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Three-dimensional tomographic mapping related to primary stability and structural miniscrew characteristics.

PubMed

Silvestrini Biavati, A; Tecco, S; Migliorati, M; Festa, F; Panza, G; Marzo, G; Gherlone, E; Tetè, S

2011-05-01

To evaluate the maxilla, mandible, and cortical plates on computerized tomographic (CT) scans to achieve accurate three-dimensional bone thickness measurements. We selected the CT scans of 25 subjects (among 102), aged 18-58 years (10 men, 15 women), with nearly complete dentition. We performed interradicular and bucco-lingual (including cortical plate thickness) measurements in dental areas distal to the canines in both alveolar arches, at three levels (5, 8, and 11 mm) from the alveolar ridge. The mean thicknesses of the cortical plates in the maxilla were 1.10 mm buccally and 1.27 mm on the palatal side (p < 0.05). In the mandible, cortical plates were 2.23 mm buccally and 2.02 mm lingually. Mandibular buccal and lingual cortical plates became thicker distally in the second and third molar areas. There was considerable variation in cortical thickness (from 0.25 to 5.50 mm). Based on interradicular distances, only 13% of measured sites in the maxilla were suitable for miniscrew insertion (≥3.3 mm), but 63% of sites were suitable in the mandible. This study showed considerable individual variation in bone thickness. Our data suggested that the palatal/lingual side may provide greater primary stability for miniscrews. The palatal area, between the second upper bicuspid and the first molar, appeared to be the most suitable area for tapered 7- to 9-mm miniscrews, starting at 1.5-2 mm from the alveolar crest. © 2011 John Wiley & Sons A/S.

Bilateral cross-bite treated by repeated rapid maxillary expansions: a 17-year follow-up case.

PubMed

Cozzani, M; Mazzotta, L; Caprioglio, A

2014-07-01

The objective of this paper is to show the clinical results after the repeated application of a Haas expander for rapid maxillary expansion (RME) anchored onto deciduous teeth in a 7-year-old patient that presented bilateral cross-bite, superior crowding and no space for permanent lateral incisors eruption. A first Haas expander was applied to the patient. She was told to activate it once a day, each activation was equal to 0.20 mm. After the first RME, the bilateral cross-bite was solved but still there was not enough space for lateral incisor eruption. A second and then a third Haas expander were applied, with the same activation protocol as the first one, in order to gain space in the anterior region and to achieve proper eruption of the lateral incisors. The patient was then treated with fixed appliances. At debonding the patient presented well aligned arch-forms: space for lateral incisor eruption was gained and superior crowding was solved. Bilateral cross-bite was also corrected. She was seen again 10 years and 17 years after expansions: she showed no relapse and presented a good functional occlusion that had remained stable, and an aesthetically pleasant smile, however she exhibited gingival recessions. Repeated rapid maxillary expansion, anchored onto deciduous teeth, performed in early mixed dentition represents a safe and successful treatment to correct severe bilateral cross- bites and to create space for maxillary incisor eruption.

35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED BETWEEN TOWER LEGS, AND ASHLAR MASONRY WALLS AND PYLONS Pen-and-ink drawing by project architect Alfred Eichler, 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

Mesodermal retinoic acid signaling regulates endothelial cell coalescence in caudal pharyngeal arch artery vasculogenesis

PubMed Central

Li, Peng; Pashmforoush, Mohammad; Sucov, Henry M.

2011-01-01

Disruption of retinoic acid signaling causes a variety of pharyngeal arch artery and great vessel defects, as well as malformations in many other tissues, including those derived from the pharyngeal endoderm. Previous studies implied that arch artery defects in the context of defective RA signaling occur secondary to pharyngeal pouch segmentation defects, although this model has never been experimentally verified. In this study, we examined arch artery morphogenesis during mouse development, and the role of RA in this process. We show in normal embryos that the arch arteries form by vasculogenic differentiation of pharyngeal mesoderm. Using various genetic backgrounds and tissue-specific mutation approaches, we segregate pharyngeal arch artery and pharyngeal pouch defects in RA receptor mutants, and show that RA signal transduction only in pharyngeal mesoderm is required for arch artery formation. RA does not control pharyngeal mesodermal differentiation to endothelium, but instead promotes the aggregation of endothelial cells into nascent vessels. Expression of VE-cadherin was substantially reduced in RAR mutants, and this deficiency may underlie the arch artery defects. The consequences of disrupted mesodermal and endodermal RA signaling were restricted to the 4th and 6th arch arteries and to the 4th pharyngeal pouch, respectively, suggesting that different regulatory mechanisms control the formation of the more anterior arch arteries and pouches. PMID:22040871

Wear biomechanics in the slicing dentition of the giant horned dinosaur Triceratops

PubMed Central

Erickson, Gregory M.; Sidebottom, Mark A.; Kay, David I.; Turner, Kevin T.; Ip, Nathan; Norell, Mark A.; Sawyer, W. Gregory; Krick, Brandon A.

2015-01-01

Herbivorous reptiles rarely evolve occluding dentitions that allow for the mastication (chewing) of plant matter. Conversely, most herbivorous mammals have occluding teeth with complex tissue architectures that self-wear to complex morphologies for orally processing plants. Dinosaurs stand out among reptiles in that several lineages acquired the capacity to masticate. In particular, the horned ceratopsian dinosaurs, among the most successful Late Cretaceous dinosaurian lineages, evolved slicing dentitions for the exploitation of tough, bulky plant matter. We show how Triceratops, a 9-m-long ceratopsian, and its relatives evolved teeth that wore during feeding to create fullers (recessed central regions on cutting blades) on the chewing surfaces. This unique morphology served to reduce friction during feeding. It was achieved through the evolution of a complex suite of osseous dental tissues rivaling the complexity of mammalian dentitions. Tribological (wear) properties of the tissues are preserved in ~66-million-year-old teeth, allowing the creation of a sophisticated three-dimensional biomechanical wear model that reveals how the complexes synergistically wore to create these implements. These findings, along with similar discoveries in hadrosaurids (duck-billed dinosaurs), suggest that tissue-mediated changes in dental morphology may have played a major role in the remarkable ecological diversification of these clades and perhaps other dinosaurian clades capable of mastication. PMID:26601198

Is arch form influenced by sagittal molar relationship or Bolton tooth-size discrepancy?

PubMed

Aldrees, Abdullah M; Al-Shujaa, Abdulmajeed M; Alqahtani, Mohammad A; Aljhani, Ali S

2015-06-26

Orthodontic patients show high prevalence of tooth-size discrepancy. This study investigates the possible association between arch form, clinically significant tooth-size discrepancy, and sagittal molar relationship. Pretreatment orthodontic casts of 230 Saudi patients were classified into one of three arch form types (tapered, ovoid, and square) using digitally scanned images of the mandibular arches. Bolton ratio was calculated, sagittal molar relationship was defined according to Angle classification, and correlations were analyzed using ANOVA, chi-square, and t-tests. No single arch form was significantly more common than the others. Furthermore, no association was observed between the presence of significant Bolton discrepancy and the sagittal molar relationship or arch form. Overall Bolton discrepancy is significantly more prevalent in males. Arch form in a Saudi patient group is independent of gender, sagittal molar relationship, and Bolton discrepancy.

CXCL12-CXCR4 signalling plays an essential role in proper patterning of aortic arch and pulmonary arteries.

PubMed

Kim, Bo-Gyeong; Kim, Yong Hwan; Stanley, Edward L; Garrido-Martin, Eva M; Lee, Young Jae; Oh, S Paul

2017-11-01

Chemokine CXCL12 (stromal derived factor 1: SDF1) has been shown to play important roles in various processes of cardiovascular development. In recent avian studies, CXCL12 signalling has been implicated in guidance of cardiac neural crest cells for their participation in the development of outflow tract and cardiac septum. The goal of this study is to investigate the extent to which CXCL12 signalling contribute to the development of aortic arch and pulmonary arteries in mammals. Novel Cxcl12-LacZ reporter and conditional alleles were generated. Using whole mount X-gal staining with the reporter allele and vascular casting techniques, we show that the domain branching pattern of pulmonary arteries in Cxcl12-null mice is completely disrupted and discordant with that of pulmonary veins and airways. Cxcl12-null mice also displayed abnormal and superfluous arterial branches from the aortic arch. The early steps of pharyngeal arch remodelling in Cxcl12-null mice appeared to be unaffected, but vertebral arteries were often missing and prominent aberrant arteries were present parallel to carotid arteries or trachea, similar to aberrant vertebral artery or thyroid ima artery, respectively. Analysis with computed tomography not only confirmed the results from vascular casting studies but also identified abnormal systemic arterial supply to lungs in the Cxcl12-null mice. Tie2-Cre mediated Cxcr4 deletion phenocopied the Cxcl12-null phenotypes, indicating that CXCR4 is the primary receptor for arterial patterning, whereas Cxcl12 or Cxcr4 deletion by Wnt1-Cre did not affect aortic arch patterning. CXCL12-CXCR4 signalling is essential for the correct patterning of aortic arches and pulmonary arteries during development. Superfluous arteries in Cxcl12-null lungs and the aortic arch infer a role of CXCL12 in protecting arteries from uncontrolled sprouting during development of the arterial system. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For Permissions, please email: journals.permissions@oup.com.

Preliminary Design of ArchE: A Software Architecture Design Assistant

DTIC Science & Technology

2003-09-01

This report presents a procedure for moving from a set of quality attribute scenarios to an architecture design that satisfies those scenarios. This...procedure is embodied in a preliminary design for an architecture design assistant named ArchE (Architecture Expert), which will be implemented on a

Consumer products and activities associated with dental injuries to children treated in United States emergency departments, 1990-2003.

PubMed

Stewart, Gregory B; Shields, Brenda J; Fields, Sarah; Comstock, R Dawn; Smith, Gary A

2009-08-01

Describe the association of consumer products and activities with dental injuries among children 0-17 years of age treated in United States emergency departments. A retrospective analysis of data from the National Electronic Injury Surveillance System, 1990-2003. There was an average of 22 000 dental injuries annually among children <18 years of age during the study period, representing an average annual rate of 31.6 dental injuries per 100 000 population. Children with primary dentition (<7 years) sustained over half of the dental injuries recorded, and products/activities associated with home structures/furniture were the leading contributors. Floors, steps, tables, and beds were the consumer products within the home most associated with dental injuries. Outdoor recreational products/activities were associated with the largest number of dental injuries among children with mixed dentition (7-12 years); almost half of these were associated with the bicycle, which was the consumer product associated with the largest number of dental injuries. Among children with permanent teeth (13- to 17-year olds), sports-related products/activities were associated with the highest number of dental injuries. Of all sports, baseball and basketball were associated with the largest number of dental injuries. To our knowledge, this is the first study to evaluate dental injuries among children using a national sample. We identified the leading consumer products/activities associated with dental injuries to children with primary, mixed, and permanent dentition. Knowledge of these consumer products/activities allows for more focused and effective prevention strategies.

Automated measurement of uptake in cerebellum, liver, and aortic arch in full-body FDG PET/CT scans.

PubMed

Bauer, Christian; Sun, Shanhui; Sun, Wenqing; Otis, Justin; Wallace, Audrey; Smith, Brian J; Sunderland, John J; Graham, Michael M; Sonka, Milan; Buatti, John M; Beichel, Reinhard R

2012-06-01

The purpose of this work was to develop and validate fully automated methods for uptake measurement of cerebellum, liver, and aortic arch in full-body PET/CT scans. Such measurements are of interest in the context of uptake normalization for quantitative assessment of metabolic activity and/or automated image quality control. Cerebellum, liver, and aortic arch regions were segmented with different automated approaches. Cerebella were segmented in PET volumes by means of a robust active shape model (ASM) based method. For liver segmentation, a largest possible hyperellipsoid was fitted to the liver in PET scans. The aortic arch was first segmented in CT images of a PET/CT scan by a tubular structure analysis approach, and the segmented result was then mapped to the corresponding PET scan. For each of the segmented structures, the average standardized uptake value (SUV) was calculated. To generate an independent reference standard for method validation, expert image analysts were asked to segment several cross sections of each of the three structures in 134 F-18 fluorodeoxyglucose (FDG) PET/CT scans. For each case, the true average SUV was estimated by utilizing statistical models and served as the independent reference standard. For automated aorta and liver SUV measurements, no statistically significant scale or shift differences were observed between automated results and the independent standard. In the case of the cerebellum, the scale and shift were not significantly different, if measured in the same cross sections that were utilized for generating the reference. In contrast, automated results were scaled 5% lower on average although not shifted, if FDG uptake was calculated from the whole segmented cerebellum volume. The estimated reduction in total SUV measurement error ranged between 54.7% and 99.2%, and the reduction was found to be statistically significant for cerebellum and aortic arch. With the proposed methods, the authors have demonstrated that automated SUV uptake measurements in cerebellum, liver, and aortic arch agree with expert-defined independent standards. The proposed methods were found to be accurate and showed less intra- and interobserver variability, compared to manual analysis. The approach provides an alternative to manual uptake quantification, which is time-consuming. Such an approach will be important for application of quantitative PET imaging to large scale clinical trials. © 2012 American Association of Physicists in Medicine.

Asymmetric rapid maxillary expansion in true unilateral crossbite malocclusion: a prospective controlled clinical study.

PubMed

Ileri, Zehra; Basciftci, Faruk Ayhan

2015-03-01

To investigate the short-term effects of the asymmetric rapid maxillary (ARME) appliance on the vertical, sagittal, and transverse planes in patients with true unilateral posterior crossbite. Subjects were divided into two groups. The treatment group was comprised of 21 patients with unilateral posterior crossbite (mean age  =  13.3 ± 2.1 years). Members of this group were treated with the ARME appliance. The control group was comprised of 17 patients with Angle Class I who were kept under observation (mean age  =  12.3 ± 0.8 years). Lateral and frontal cephalograms were taken before the expansion (T1), immediately after expansion (T2), and at postexpansion retention (T3) in the treatment group and at preobservation (T1) and postobservation (T2) in the control group. A total of 34 measurements were assessed on cephalograms. For statistical analysis, the Wilcoxon test and analysis of covariance were used. The ARME appliance produced significant increases in nasal, maxillary base, upper arch, and lower arch dimensions (P < .01) and a clockwise rotation of the occlusal plane (P  =  .001). The ARME appliance created asymmetric increments in the transversal dimensions of the nose, maxilla, and upper arch in the short term. Asymmetric expansion therapy for subjects with unilateral maxillary deficiency may provide satisfactory outcomes in adolescents, with the exception of mandibular arch expansion. The triangular pattern of expansion caused clockwise rotation of the mandible and the occlusal plane and produced significant alterations in the vertical facial dimensions, whereas it created no displacement in maxilla in the sagittal plane.

An Intercenter Comparison of Dental Arch Relationships and Craniofacial Form Including a Center Using Nasoalveolar Molding.

PubMed

Peanchitlertkajorn, Supakit; Mercado, Ana; Daskalogiannakis, John; Hathaway, Ronald; Russell, Kathleen; Semb, Gunvor; Shaw, William; Lamichane, Manish; Fessler, Jennifer; Long, Ross E

2018-01-01

Objective To compare dental arch relationship and craniofacial morphology of patients with CUCLP in pre-adolescence from five cleft centers including a center using NAM. Design Retrospective cohort study. Setting Five cleft centers in North America. Patients One hundred eighty-two subjects with repaired CUCLP from the five cleft centers participated in the craniofacial form study. One hundred forty-eight subjects from four of the five centers participated in the dental arch relationship study. Methods Digital dental models were assessed using the GOSLON Yardstick. Eighteen cephalometric measurements were performed. Measurement means, by center, were compared. Analysis of variance and Tukey-Kramer analysis were used to compare GOSLON scores and cephalometric measurements. Results The center that performed neither PSOT (including NAM) nor primary bone grafting exhibited the most favorable mean GOSLON score. The same center also showed the highest mean SNA, ANB, and ANS-N-Pg angles. However, the mean ANB and ANS-N-Pg angles were not significantly different from those of the center using NAM. No statistically significant differences were seen for mandibular prominence, vertical dimensions, or dental inclinations. The center with NAM also showed a significantly smaller nasoform angle than two of the four other centers. Conclusion The centers that used NAM and other forms of PSOT did not have better dental arch relationships or craniofacial morphology compared with the centers that performed only primary lip repair. However, this study was not designed to investigate the cause-and-effect relationship between specific outcomes and particular features of those protocols.

Pregnancy Leads to Lasting Changes in Foot Structure

PubMed Central

Segal, Neil A.; Boyer, Elizabeth R.; Teran-Yengle, Patricia; Glass, Natalie; Hillstrom, Howard J.; Yack, H. John

2013-01-01

Objective Women are disproportionately affected by musculoskeletal disorders. Parous women appear to be at particularly elevated risk for structural and functional changes in the lower limbs. The combination of increased weight on joints with potentially greater laxity during pregnancy could lead to permanent structural changes in feet. Although arches may become lax during pregnancy, it is unknown whether changes persist. The objective of this study was to determine whether arch height loss persists postpartum. Design Forty-nine women completed this longitudinal study. Static and dynamic arch measurements were collected in first-trimester and at 19 weeks postpartum. Linear mixed models were used to determine whether outcome measures significantly changed overall or by parity. Results Arch height and rigidity index significantly decreased, with concomitant increases in foot length and arch drop. The first pregnancy accounted for the reduction in arch rigidity and increases in foot length and arch drop. No changes were detected in the center of pressure excursion index. Conclusions Pregnancy appears to be associated with a permanent loss of arch height and the first pregnancy may be the most significant. These changes in the feet could contribute to the increased risk for musculoskeletal disorders in women. Further research should assess the efficacy of rehabilitative interventions for prevention of pregnancy-related arch drop. PMID:23117270

The association of foot arch posture and prior history of shoulder or elbow surgery in elite-level baseball pitchers.

PubMed

Feigenbaum, Luis A; Roach, Kathryn E; Kaplan, Lee D; Lesniak, Bryson; Cunningham, Sean

2013-11-01

Case-control. The specific aim of this study was to examine the association between abnormal foot arch postures and a history of shoulder or elbow surgery in baseball pitchers. Pitching a baseball generates forces throughout the musculoskeletal structures of the upper and lower limbs. Structures such as the longitudinal arch of the foot are adaptable to stresses over time. Repeated pitching-related stresses may contribute to acquiring abnormal foot arch postures. Inversely, congenitally abnormal foot arch posture may lead to altered stresses of the upper limb during pitching. A convenience sample of 77 pitchers was recruited from a Division I university team and a professional baseball franchise. Subjects who had a history of shoulder or elbow surgery to the pitching arm were classified as cases. Subjects who met the criteria for classification of pes planus or pes cavus based on longitudinal arch angle were classified as having abnormal foot arch posture. Odds ratios were calculated to examine the association between abnormal foot arch posture and pitching-arm injury requiring surgery. Twenty-three subjects were classified as cases. The odds of being a case were 3.4 (95% confidence interval: 1.2, 9.6; P = .02) times greater for subjects with abnormal foot arch posture and 2.9 (95% confidence interval: 1.0, 8.1; P = .04) times greater for subjects with abnormal foot posture on the lunge leg. Abnormal foot arch posture and a surgical history in the pitching shoulder or elbow may be associated. Because the foot and its arches are adaptable and change over time, the pathomechanics of this association should be further explored.

Zebrafish hox paralogue group 2 genes function redundantly as selector genes to pattern the second pharyngeal arch.

PubMed

Hunter, Michael P; Prince, Victoria E

2002-07-15

The pharyngeal arches are one of the defining features of the vertebrates, with the first arch forming the mandibles of the jaw and the second forming jaw support structures. The cartilaginous elements of each arch are formed from separate migratory neural crest cell streams, which derive from the dorsal aspect of the neural tube. The second and more posterior crest streams are characterized by specific Hox gene expression. The zebrafish has a larger overall number of Hox genes than the tetrapod vertebrates, as the result of a duplication event in its lineage. However, in both zebrafish and mouse, there are just two members of Hox paralogue group 2 (PG2): Hoxa2 and Hoxb2. Here, we show that morpholino-mediated "knock-down" of both zebrafish Hox PG2 genes results in major defects in second pharyngeal arch cartilages, involving replacement of ventral elements with a mirror-image duplication of first arch structures, and accompanying changes to pharyngeal musculature. In the mouse, null mutants of Hoxa2 have revealed that this single Hox gene is required for normal second arch patterning. By contrast, loss-of-function of either zebrafish Hox PG2 gene individually has no phenotypic consequence, showing that these two genes function redundantly to confer proper pattern to the second pharyngeal arch. We have also used hoxb1a mis-expression to induce localized ectopic expression of zebrafish Hox PG2 genes in the first arch; using this strategy, we find that ectopic expression of either Hox PG2 gene can confer second arch identity onto first arch structures, suggesting that the zebrafish Hox PG2 genes act as "selector genes." 2002 Elsevier Science (USA).

Aortic arch repair under moderate hypothermic circulatory arrest with or without antegrade cerebral perfusion based on the extent of repair

PubMed Central

Park, Sung Jun; Jeon, Bo Bae; Kim, Hee Jung

2018-01-01

Background For aortic-arch repair, moderate hypothermic circulatory arrest (HCA) have shown favorable outcomes over conventional deep HCA when coupled with antegrade cerebral perfusion (ACP); however, recent studies have shown that ACP may not be essential when circulatory arrest time is less than 30 minutes. This study aims to evaluate the stratified arch repair strategy of moderate HCA with or without ACP based on the extent of procedure. Methods Consecutive 138 patients (63 female; mean age, 60.2±15.7 years) undergoing open arch repair due to acute aortic syndrome (n=69) or chronic aneurysm (n=69) from January 2012 through April 2017 were enrolled in this study. Stratified neuroprotective strategy was employed according to the extent of repair: hemi-arch repair (n=93) was performed under moderated HCA alone and total-arch repair (n=45) under moderate HCA combined with unilateral ACP. Results Median total circulatory arrest and total procedural times were 8.0 minutes [interquartile range (IQR), 6.0–10.0] and 233.0 minutes (IQR, 196.0–290.0 minutes), respectively in the hemi-arch group, and 25.0 minutes (IQR, 12.0–33.0 minutes) and 349.0 minutes (IQR, 276.0–406.0 minutes), respectively in the total-arch group. Early mortality occurred in 2 patients (1.4%) who underwent hemi-arch repair for acute aortic dissection. There was no permanent neurological injury, but 2 cases (1.4%) of temporary neurologic deficit in the hemi-arch group. Other complications included re-exploration for bleeding in 6 (4.3%), postoperative extracorporeal life support in 5 (3.6%) and new-dialysis in 6 (4.3%). Conclusions Stratified cerebral perfusion strategy using moderate hypothermia for aortic-arch surgery based on the extent of arch repair showed satisfactory safety and reasonable efficiency. PMID:29707342

Partially arrested root formation in a permanent maxillary central incisor subsequent to trauma to the primary dentition.

PubMed

Nagatani, S; Mathieu, G P

1994-02-01

When the primary dentition sustains a traumatic insult, the development of the succedaneous teeth can be disturbed leading to a number of malformations. In this case report, the patient presented with a history of prior trauma to his primary maxillary incisors which resulted in partially arrested root formation for a permanent incisor. The considerations in formulating a treatment plan which included orthodontics are discussed.

Contact allergic gastritis: an underdiagnosed entity?

PubMed Central

Pföhler, Claudia; Körner, Rebecca; Vogt, Thomas; Müller, Cornelia S L

2012-01-01

Only a few cases of contact allergic gastritis in patients with nickel allergy have been reported. We report a case of probable contact-allergic gastritis in a 46-year-old woman. Clinical examination revealed lichenoid mucosal lesions of the gums adjacent to bridges and crowns that had been implanted several weeks back. Since implantation, the patient had suffered from gastrointestinal complaints (including stomach pain). Gastroscopy showed eosinophilic gastritis. Patch testing done under the diagnosis of contact allergic stomatitis showed positive reactions to: gold sodium thiosulphate; manganese (II) chloride; nickel (II) sulphate; palladium chloride; vanadium (III) chloride and zirconium (IV) chloride. The crowns and bridge contained gold, palladium and zirconium chloride, hence they were replaced by titan-based dentition. Shortly after replacing the artificial dentition, all gastrointestinal symptoms resolved spontaneously without further treatment. Delayed-type allergy against the components of artificial dentition seemed to be the cause of gastritis. PMID:23192576

A standardized, uniform and universal dental chart for documenting state of dentition before anaesthesia.

PubMed

Gatt, S P; Aurisch, J; Wong, K

2001-02-01

It is vital to have adequate and precise documentation of the condition of a patient's dentition before commencing an anaesthetic. The incidence of dental damage during anaesthesia is not low. To the authors' knowledge, there is no standardized method used by anaesthetists to document the state of a patient's dentition. We propose the introduction of a standardized uniform dental chart to enable anaesthetists to accurately document the condition of their patients' teeth. This vital information can be easily obtained during the preanaesthetic assessment. With the increase in medical litigation and demands for adequate documentation, we believe this chart can become an invaluable part of every hospital's preanaesthetic assessment form. The dental chart is to be offered as a service to anaesthetists in the form of a copyright-free "Freeware" computer diskette or adhesive sticker and will be downloadable from the internet.

Oral health status of children with autistic disorder in Chennai.

PubMed

Vishnu Rekha, C; Arangannal, P; Shahed, H

2012-06-01

To assess the oral health status of autistic children in Chennai. Oral health status was assessed for 483 children with autism, solicited from special education schools, autistic child centres and therapy centres. Conditions assessed were plaque accumulation, gingival health, dental caries, malocclusion, developmental anomalies, oral injuries and restorations. Chi-square and Fisher's exact tests of significance were used to compare groups. Proportions test was used to compare the significance of the parameters between boys and girls. Autistic children with primary dentition showed significantly higher incidence of dental caries (24%), when compared to other oral conditions. Children with mixed dentition had more gingivitis (50%) and children with permanent dentition had more gingivitis (48.96%) and malocclusion (71.15%). All the oral conditions were seen more in boys than girls. Autistic children have significantly poor oral hygiene and higher incidence of malocclusion and dental caries when compared to other oral conditions.