Lessons learned in the execution of advanced x-ray material discrimination (Conference Presentation)

NASA Astrophysics Data System (ADS)

Young, Sharene

2017-05-01

Advanced X-ray Material Discrimination (AXMD) or BAA 13-05 was a broad agency announcement which was initiated in order to develop solutions to the following problem. The emergence of improvised explosive threats and their use by terrorists has placed many challenges on the aviation security screening layers. EDS and AT X-ray equipment have been presented with considerable challenges in developing a broad detection capability for improvised explosive threats during security screening of checked bags and carry-on items. Technologies are needed that increase the measurement or mathematical discrimination between improvised explosive threats and stream-of-commerce clutter in checked baggage and carry-on items. Conventional EDS utilizes two basic discriminating signatures: effective atomic number and density of screened objects. R and D is needed to identify additional discriminating signatures between improvised explosive threats and stream-of commerce clutter to improve detection capability with reduced false alarm rates. DHS S and T EXD along with stakeholders at the TSA, TSL, and the UK Home Office have been successful in funding efforts to address and potentially provide operational solutions which can be deployed as part of the Next Generation of X-ray Technologies.

Determining the Optimal C-130 Deployed Crew Ratio

DTIC Science & Technology

2014-06-13

Bali Internat’l Dominique Ed Osok Pi na ng K am pa...Tari Jalaluddin Pres. Nicolau Sam Ratulangi Pinang Kampai K ia m an a M op ah Sultan Iskandarmuda Gorda Tambolaka Bali Internat’l Dominique Ed Osok...Tambolaka Bali Internat’l Dominique Ed Osok Pi na ng K am pa i Su lta n Is ka nd ar m ud a Tindal Iswahyudi Moses Kilangin Mutiara K ia m an a M op ah

Feasible Electricity Infrastructure Pathways in the Context of Climate-Water Change Constraints

NASA Astrophysics Data System (ADS)

Miara, A.; Vorosmarty, C. J.; Macknick, J.; Cohen, S. M.; Tidwell, V. C.; Newmark, R. L.; Fekete, B. M.; Corsi, F.; Sun, Y.; Proussevitch, A. A.; Glidden, S.

2017-12-01

The carbon and water intensity of US electricity generation has recently decreased due to the natural gas revolution and deployment of renewable technologies. Yet, power plants that require water for cooling still provide 80% of electricity generation and projected climate-water conditions may limit their power output and affect reliability. Understanding the connections and tradeoffs across water, electricity and climate systems is timely, as the nation tries to mitigate and adapt to a changing climate. Electricity expansion models are used to provide insight on power sector pathways given certain policy goals and economic conditions, but do not typically account for productivity limitations due to physical climate-water constraints. Here, we account for such constraints by coupling an electricity expansion model (Regional Energy Deployment System - ReEDS) with the combined Water Balance and Thermoelectric Power and Thermal Pollution Models (WBM-TP2M), which calculate the available capacity at power plants as a function of hydrologic flows, climate conditions, power plant technology and environmental regulations. To fully capture and incorporate climate-water impacts into ReEDS, a specific rule-set was designed for the temporal and spatial downscaling and up-scaling of ReEDS results into WBM-TP2M inputs and visa versa - required to achieve a modeling `loop' that will enable convergence on a feasible solution in the context of economic and geophysical constraints and opportunities. This novel modeling approach is the next phase of research for understanding electricity system vulnerabilities and adaptation measures using energy-water-climate modeling, which to-date has been limited by a focus on individual generators without analyzing power generation as a collective regional system. This study considers four energy policy/economic pathways under future climate-water resource conditions, designed under the National Energy Water System assessment framework. Results highlight the importance of linking Earth-system and economic modeling tools and provide insight on potential electricity infrastructure pathways that are sustainable, in terms lowering both water use and carbon emissions, and reliable in the face of future climate-water resource constraints.

Military Deployments as a Respite from Burnout: An Analysis of Gender and Family

DTIC Science & Technology

2004-03-23

Maslach - Burnout Inventory ( Maslach & Jackson, 1986). The Emotional Exhaustion scale measures an...Exhaustion measure of the Maslach - Burnout Inventory has been tested and has been shown to have the highest reliability of the Maslach - Burnout Inventory ...1986). Maslach Burnout Inventory Manual (2nd Ed. ed.). Palo Alto: Consulting Psychologists Press. Maslach , C., & Leiter, M. P. (1999). Take

Obstacles delaying the prompt deployment of piston-type mechanical cardiopulmonary resuscitation devices during emergency department resuscitation: a video-recording and time-motion study.

PubMed

Huang, Edward Pei-Chuan; Wang, Hui-Chih; Ko, Patrick Chow-In; Chang, Anna Marie; Fu, Chia-Ming; Chen, Jiun-Wei; Liao, Yen-Chen; Liu, Hung-Chieh; Fang, Yao-De; Yang, Chih-Wei; Chiang, Wen-Chu; Ma, Matthew Huei-Ming; Chen, Shyr-Chyr

2013-09-01

The quality of cardiopulmonary resuscitation (CPR) is important to survival after cardiac arrest. Mechanical devices (MD) provide constant CPR, but their effectiveness may be affected by deployment timeliness. To identify the timeliness of the overall and of each essential step in the deployment of a piston-type MD during emergency department (ED) resuscitation, and to identify factors associated with delayed MD deployment by video recordings. Between December 2005 and December 2008, video clips from resuscitations with CPR sessions using a MD in the ED were reviewed using time-motion analyses. The overall deployment timeliness and the time spent on each essential step of deployment were measured. There were 37 CPR recordings that used a MD. Deployment of MD took an average 122.6 ± 57.8s. The 3 most time-consuming steps were: (1) setting the device (57.8 ± 38.3s), (2) positioning the patient (33.4 ± 38.0 s), and (3) positioning the device (14.7 ± 9.5s). Total no flow time was 89.1 ± 41.2s (72.7% of total time) and associated with the 3 most time-consuming steps. There was no difference in the total timeliness, no-flow time, and no-flow ratio between different rescuer numbers, time of day of the resuscitation, or body size of patients. Rescuers spent a significant amount of time on MD deployment, leading to long no-flow times. Lack of familiarity with the device and positioning strategy were associated with poor performance. Additional training in device deployment strategies are required to improve the benefits of mechanical CPR. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

NanoRacks CubeSat Deployment

NASA Image and Video Library

2015-02-27

ISS042E290579 (02/27/2015) --- On Feb. 27 2015, a series of CubeSats, small experimental satellites, were deployed via a special device mounted on the Japanese Experiment Module (JEM) Remote Manipulator System (JEMRMS). Deployed satellites included twelve Dove sats, one TechEdSat-4, one GEARRSat, one LambdaSat, one MicroMas. These satellites perform a variety of functions from capturing new Earth imagery, to using microwave scanners to create 3D images of hurricanes, to even developing new methods for returning science samples back to Earth from space. The small satellites were deployed through the first week in March.

The Customers' Perspective: The EdNET 98 Survey of Buyers and Managers of Educational Technology. Constructive Input for the Educational Technology Industry from the EdNET 98 Education Executives Advisory Board.

ERIC Educational Resources Information Center

Craighead, Donna; Bigham, Vicki Smith; Heller, Nelson B.

The EdNET 98 Education Executives Advisory Board, also known as Partners in Education Program (PEP), is a featured activity of the EdNET 98 Conference. Its focus is to bring educators and vendors together to share their perspectives about technology in education and discussion technology-related concerns and issues. This report presents results…

New advances in erectile technology

PubMed Central

Stein, Marshall J.; Lin, Haocheng

2014-01-01

New discoveries and technological advances in medicine are rapid. The role of technology in the treatment of erectile dysfunction (ED) will be widened and more options will be available in the years to come. These erectile technologies include external penile support devices, penile vibrators, low intensity extracorporeal shockwave, tissue engineering, nanotechnology and endovascular technology. Even for matured treatment modalities for ED, such as vacuum erectile devices and penile implants, there is new scientific information and novel technology available to improve their usage and to stimulate new ideas. We anticipate that erectile technologies may revolutionize ED treatment and in the very near future ED may become a curable condition. PMID:24489605

Analysis of particles produced during airbag deployment by scanning electron microscopy with energy dispersive x-ray spectroscopy and their deposition on surrounding surfaces: a mid-research summary

NASA Astrophysics Data System (ADS)

Wyatt, J. Matney

2011-06-01

Airbags can be encountered in forensic work when investigating a car crash and are typically constructed with primerlike material to begin the deployment apparatus. The mechanisms of airbag deployment can produce particles ideal for scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS) analysis. A recent study published by Berk studied airbags with vents and showed that it is possible for particles generated from the deployment of these airbags to deposit on surfaces in the vehicle as the airbags deflate.1 Another paper published by Berk reported particles similar in morphology and composition to primer gunshot residue (GSR) are produced by side impact airbags.2 This paper's aim will be to show mid-point results of a study still in progress in which non-vented airbags were analyzed to determine if they exhibited the same particle depositing features as their vented airbag counterparts. Further investigation in this study is being performed to find more airbags which produce primer gunshot residue-like particles containing lead, barium, and antimony from airbag deployment. To date, the study has resulted in (1) non-vented airbags exhibiting deposition of particles suitable for SEM/EDS analysis and (2) no gunshot residue-like particles being detected from the airbag residues studied thus far.

Energy Systems Analysis Tools | Energy Analysis | NREL

Science.gov Websites

energy resources. REFlex NREL uses this dispatch model to evaluate renewable generation as a function of information. Regional Energy Deployment System (ReEDS) NREL uses this multi-regional, multi-time period, GIS

Effectiveness of Mathematics Teaching and Learning Experiences through Wireless Technology as Recent Style to Enhance B.Ed. Trainees

ERIC Educational Resources Information Center

Joan, D. R. Robert

2015-01-01

The objective of the study was to find out the effect of learning through Wireless technologies and the traditional method in teaching and learning Mathematics. The investigator adopted experimental research to find the effectiveness of implementing Wireless technologies in the population of B.Ed. trainees. The investigator selected 32 B.Ed.…

Users speak out on technology deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, Mark; Prochaska, Marty; Cromer, Paul

2001-02-25

This report summarizes user feedback data collected during a recent Accelerated Site Technology Deployment (ASTD) project: the Fluor Fernald ASTD Technology Deployment Project from May, 1999 through September, 2000. The main goal of the ASTD project was to use the ''Fernald approach'' to expedite the deployment of new or innovative technologies with superior safety, cost, and/or productivity benefits to Department of Energy (DOE) facilities. The Fernald approach targets technology end-users and their managers and directly involves them with hands-on demonstrations of new or innovative technologies during technology transfer sessions. The two technologies deployed through this project were the Personal Icemore » Cooling System (PICS) and the oxy-gasoline torch. Participants of technology transfer sessions were requested to complete feedback surveys. Surveys evaluated the effectiveness of the Fernald approach to technology deployment and assessed the responsiveness of employees to new technologies. This report presents the results of those surveys.« less

Utility-Scale Photovoltaic Deployment Scenarios of the Western United States: Implications for Solar Energy Zones in Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frew, Bethany; Mai, Trieu; Krishnan, Venkat

2016-12-01

In this study, we use the National Renewable Energy Laboratory's (NREL's) Regional Energy Deployment System (ReEDS) capacity expansion model to estimate utility-scale photovoltaic (UPV) deployment trends from present day through 2030. The analysis seeks to inform the U.S. Bureau of Land Management's (BLM's) planning activities related to UPV development on federal lands in Nevada as part of the Resource Management Plan (RMP) revision for the Las Vegas and Pahrump field offices. These planning activities include assessing the demand for new or expanded additional Solar Energy Zones (SEZ), per the process outlined in BLM's Western Solar Plan process.

Modeling the Value of Integrated Canadian and U.S. Power Sector Expansion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley, Beiter, Philipp; Steinberg, Daniel

2016-09-08

The United States and Canada power systems are not isolated. Cross-border transmission and coordination of system operation create an interconnected power system, which results in combined imports and exports of electricity of greater than 70 TWh per year [1]. Currently, over 5 GW of new international transmission lines are in various stages of permitting and development. These lines may enable greater integration and coordination of the U.S. and Canada systems, which can in turn reduce challenges associated with integration of high penetrations of variable renewables. Furthermore, low-cost Canadian resources, such as wind and hydro, could contribute to compliance with themore » EPA's recently released Clean Power Plan. Improving integration and coordination internationally will reduce the costs of accessing these resources. This analysis work build on previous work by Ibanez and Zinaman [2]. In this work we seek to better understand the value of additional interconnection between the U.S. and Canadian power systems. Specifically, we quantify the value of additional interconnection and coordination within the Canadian-US integrated power system under scenarios in which large reductions (>80%) in power sector CO2 emissions are achieved. We explore how the ability to add additional cross-border transmission impacts capacity investment, the generation mix, system costs, and the ability of the system to integrate variable renewable energy into the power system. This analysis uses the Regional Energy Deployment System (ReEDS) capacity expansion model [3], [4] to quantify the value of the integrated power system expansion of the United States and Canada. ReEDS is an optimization model that assesses the deployment and operation (including transmission) of the electricity sector of the contiguous United States and Canadian provinces from 2016 through 2050. It has the ability to model the integration of renewable energy technologies into the grid. ReEDS captures renewable energy resources through the use of 356 individual resource regions and 134 balancing areas across the U.S. and is able to handle renewable energy issues such as variability in wind and solar output, transmission costs and constraints, and ancillary services requirements.« less

ED15-0249-032

NASA Image and Video Library

2015-08-13

NASA’s Global Hawk aircraft deploys a dropsonde during a test flight over the Dryden Aeronautical Test Range in August 2015. The small, tube-shaped sensor will transmit data on temperature, humidity, and wind speed, which will be used to help improve weather model forecasts

Des Moines metropolitan area ITS strategic plan

DOT National Transportation Integrated Search

1997-12-01

The purpose of this document is to report on the conclusions of the Intelligent Transportation Systems (ITS) Early Deployment Study (EDS) for the Des Moines metropolitan area. The objective of the study was to develop a strategic plan for the develop...

The 'mindless' relationship between nursing homes and emergency departments: what do Bourdieu and Freire have to offer?

PubMed

McCloskey, Rose

2011-06-01

The 'mindless' relationship between nursing homes and emergency departments: what do Bourdieu and Freire have to offer? This paper explicates the long-standing and largely unquestioned adversarial relationship between nurses working in the nursing home (NH) and the emergency department (ED). Drawing on the author's own research on resident ED transfers, this paper reports on the conflict and tension that can arise when residents transfer between the two settings. The theoretical concepts of mindlessness, habitus, social capital and oppression are deployed to understand the contextual nature of the social relations that exist between NH and ED practitioners and between practitioners and residents. This theoretical discussion offers the potential to uncover the social relations that give rise to problematic transfers which may lead to alternative and more productive NH to ED transfers. © 2011 Blackwell Publishing Ltd.

Considering the Role of Natural Gas in the Deep Decarbonization of the U.S. Electricity Sector. Natural Gas and the Evolving U.S. Power Sector Monograph Series: Number 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley; Beppler, Ross; Zinaman, Owen

Natural gas generation in the U.S. electricity sector has grown substantially in recent years, while the sector's carbon dioxide (CO2) emissions have generally declined. This relationship highlights the concept of natural gas as a potential enabler of a transition to a lower-carbon future. This work considers that concept by using the National Renewable Energy Laboratory (NREL) Renewable Energy Deployment System (ReEDS) model. ReEDS is a long-term capacity expansion model of the U.S. electricity sector. We examine the role of natural gas within the ReEDS modeling framework as increasingly strict carbon emission targets are imposed on the electricity sector. In additionmore » to various natural gas price futures, we also consider scenarios that emphasize a low-carbon technology in order to better understand the role of natural gas if that low-carbon technology shows particular promise. Specifically, we consider scenarios with high amounts of energy efficiency (EE), low nuclear power costs, low renewable energy (RE) costs, and low carbon capture and storage (CCS) costs. Within these scenarios we find that requiring the electricity sector to lower CO2 emissions over time increases near-to-mid-term (through 2030) natural gas generation (see Figure 1 - left). The long-term (2050) role of natural gas generation in the electricity sector is dependent on the level of CO2 emission reduction required. Moderate reductions in long-term CO2 emissions have relatively little impact on long-term natural gas generation, while more stringent CO2 emission limits lower long-term natural gas generation (see Figure 1 - right). More stringent carbon targets also impact other generating technologies, with the scenarios considered here seeing significant decreases in coal generation, and new capacity of nuclear and renewable energy technologies over time. Figure 1 also demonstrates the role of natural gas in the context of scenarios where a specific low-carbon technology is advantaged. In 2030, natural gas generation in the technology scenarios is quite similar to that in the reference scenarios, indicating relatively little change in the role of natural gas in the near-to-mid-term due to advancements in those technology areas. The 2050 natural gas generation shows more significant differences, suggesting that technology advancements will likely have substantial impacts on the role of natural gas in the longer-term timeframe. Natural gas generation differences are most strongly driven by alternative natural gas price trajectories--changes in natural gas generation in the Low NG Price and High NG Price scenarios are much larger than in any other scenario in both the 2030 and 2050 timeframes. The only low-carbon technology scenarios that showed any increase in long-term natural gas generation relative to the reference case were the Low CCS cost scenarios. Carbon capture and storage technology costs are currently high, but have the potential to allow fossil fuels to play a larger role in low-carbon grid. This work considers three CCS cost trajectories for natural gas and coal generators: a baseline trajectory and two lower cost trajectories where CO2 capture costs reach $40/metric ton and $10/metric ton, respectively. We find that in the context of the ReEDS model and with these assumed cost trajectories, CCS can increase the long-term natural gas generation under a low carbon target (see Figure 2). Under less stringent carbon targets we do not see ReEDS electing to use CCS as part of its electricity generating portfolio for the scenarios considered in this work.« less

Client Location in 802.11 Networks

DTIC Science & Technology

2007-03-01

The Encyclopedia of Networking. 1995. Alameda. 3. Forouzan, Behrouz A. TCP/IP Protocol Suite. 2nd ed. New York: Mc- Graw Hill, 2003. 4. Holt, Keith...Proceedings. April 2003: 1353-1358. 18. Willingham, Stephen . Navy Pursuing ‘Smaller, Deployable, Interactive’ Networked Systems. Nov 2000. National

Gossamer-1: Mission concept and technology for a controlled deployment of gossamer spacecraft

NASA Astrophysics Data System (ADS)

Seefeldt, Patric; Spietz, Peter; Sproewitz, Tom; Grundmann, Jan Thimo; Hillebrandt, Martin; Hobbie, Catherin; Ruffer, Michael; Straubel, Marco; Tóth, Norbert; Zander, Martin

2017-01-01

Gossamer structures for innovative space applications, such as solar sails, require technology that allows their controlled and thereby safe deployment. Before employing such technology for a dedicated science mission, it is desirable, if not necessary, to demonstrate its reliability with a Technology Readiness Level (TRL) of six or higher. The aim of the work presented here is to provide reliable technology that enables the controlled deployment and verification of its functionality with various laboratory tests, thereby qualifying the hardware for a first demonstration in low Earth orbit (LEO). The development was made in the Gossamer-1 project of the German Aerospace Center (DLR). This paper provides an overview of the Gossamer-1 mission and hardware development. The system is designed based on the requirements of a technology demonstration mission. The design rests on a crossed boom configuration with triangular sail segments. Employing engineering models, all aspects of the deployment were tested under ambient environment. Several components were also subjected to environmental qualification testing. An innovative stowing and deployment strategy for a controlled deployment, as well as the designs of the bus system, mechanisms and electronics are described. The tests conducted provide insights into the deployment process and allow a mechanical characterization of that deployment process, in particular the measurement of the deployment forces. Deployment on system level could be successfully demonstrated to be robust and controllable. The deployment technology is on TRL four approaching level five, with a qualification model for environmental testing currently being built.

Using technology within the treatment of eating disorders: a clinical practice review.

PubMed

Shingleton, Rebecca M; Richards, Lauren K; Thompson-Brenner, Heather

2013-12-01

The focus of this clinical practice review is to provide clinicians a framework for incorporating technology into the treatment of eating disorders (EDs). We detailed studies that were published within the past 11 years (2002-2012) and that included at least 10 participants. Our primary aims were to describe how technology has been used to enhance the delivery of ED treatment as well as report the effectiveness of these technology-based interventions. We also provided clinical applications and considerations for clinicians who wish to use technology within their own practice. We found that a range of technologies (e.g., televideo, e-mail, CD-ROM, Internet, text message) have been used as a means to either deliver or enhance treatment at various levels of care (e.g., therapy, guided self-help, treatment adjunct). The majority of the studies were based on cognitive-behavioral principles and included samples diagnosed with bulimia nervosa (BN), binge eating disorder (BED), or subclinical levels of BN or BED. Most researchers reported positive results, with a few caveats such as technology-based interventions may not be optimal for individuals with more severe pathology, and some individuals described wanting more personal interaction. The overarching finding was that technology may be successfully integrated within ED treatment and may offer new ways to extend ED interventions to individuals who may not otherwise have access to specialty ED care.

47 CFR 51.230 - Presumption of acceptability for deployment of an advanced services loop technology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... an advanced services loop technology. 51.230 Section 51.230 Telecommunication FEDERAL COMMUNICATIONS... Carriers § 51.230 Presumption of acceptability for deployment of an advanced services loop technology. (a) An advanced services loop technology is presumed acceptable for deployment under any one of the...

Dust Removal Technology Demonstration for a Lunar Habitat

NASA Technical Reports Server (NTRS)

Calle, C. I.; Chen, A.; Immer, C. D.; Csonka, M.; Hogue, M. D.; Snyder, S. J.; Rogriquez, M.; Margiotta, D. V.

2010-01-01

We have developed an Electrodynamic Dust Shield (EDS), an active dust mitigation technology with applications to solar panels, thermal radiators, optical systems, visors, seals and connectors. This active technology is capable of removing dust and granular material with diameters as large as several hundred microns. In this paper, we report on the development of three types of EDS systems for NASA's Habitat Demonstration Unit (HDU). A transparent EDS 20 cm in diameter with indium tin oxide electrodes on a 0.1 mm-thick polyethylene terephtalate (PET) film was constructed for viewport dust protection. Two opaque EDS systems with copper electrodes on 0.1 mm-thick Kapton were also built to demonstrate dust removal on the doors of the HDU. A lotus coating that minimizes dust adhesion was added to one of the last two EDS systems to demonstrate the effectiveness of the combined systems.

A Comparison of the Incidence of Cricothyrotomy in the Deployed Setting to the Emergency Department at a Level 1 Military Trauma Center: A Descriptive Analysis

DTIC Science & Technology

2015-03-01

the providers in the deployed setting and include the Tactical Combat Casualty Care casualty card. Data are then coded for query and analysis. All...intubate, can’t ventilate” and disruption of head/neck anatomy. Of the four procedures performed in the ED setting, three patients survived to hospital...data from SAMMC are limited by the search methods and data extraction. We searched by Current Procedural Ter- minology code , which requires that the

Ohio Army National Guard Mental Health Initiative: Risk and Resilience Factors for Combat-Related Posttraumatic Psychopathology and Post Combat Adjustment

DTIC Science & Technology

2013-10-01

never married , divorced/separated/widowed, married ), race (White, Black, other), annual income (≤ $60,000 vs . > $60,000), ed- ucation (high school...to a combat setting (Elhai, et al. 2012), while protection is associated with post-deployment support, being married and being female (Orr, et al...never deployed (53.0% vs . 39.5%, p = 0.005) and PTSD (8.3% vs . 1.9%, p = 0.005)  Women more often had a history of mood disorders as compared to

SoilSCAPE in-Situ Observations of Soil Moisture for SMAP Validation: Pushing the Envelopes of Spatial Coverage and Energy Efficiency in Sparse Wireless Sensor Networks (Invited)

NASA Astrophysics Data System (ADS)

Moghaddam, M.; Silva, A.; Clewley, D.; Akbar, R.; Entekhabi, D.

2013-12-01

Soil Moisture Sensing Controller and oPtimal Estimator (SoilSCAPE) is a wireless in-situ sensor network technology, developed under the support of NASA ESTO/AIST program, for multi-scale validation of soil moisture retrievals from the Soil Moisture Active and Passive (SMAP) mission. The SMAP sensor suite is expected to produce soil moisture retrievals at 3 km scale from the radar instrument, at 36 km from the radiometer, and at 10 km from the combination of the two sensors. To validate the retrieved soil moisture maps at any of these scales, it is necessary to perform in-situ observations at multiple scales (ten, hundreds, and thousands of meters), representative of the true spatial variability of soil moisture fields. The most recent SoilSCAPE network, deployed in the California central valley, has been designed, built, and deployed to accomplish this goal, and is expected to become a core validation site for SMAP. The network consists of up to 150 sensor nodes, each comprised of 3-4 soil moisture sensors at various depths, deployed over a spatial extent of 36 km by 36 km. The network contains multiple sub-networks, each having up to 30 nodes, whose location is selected in part based on maximizing the land cover diversity within the 36 km cell. The network has achieved unprecedented energy efficiency, longevity, and spatial coverage using custom-designed hardware and software protocols. The network architecture utilizes a nested strategy, where a number of end devices (EDs) communicate to a local coordinator (LC) using our recently developed hardware with ultra-efficient circuitry and best-effort-timeslot allocation communication protocol. The LCs in turn communicates with the base station (BS) via text messages and a new compression scheme. The hardware and software technologies required to implement this latest deployment of the SoilSCAPE network will be presented in this paper, and several data sets resulting from the measurements will be shown. The data are available publicly in near-real-time from the project web site, and are also available and searchable via an extensive set of metadata fields through the ORNL-DAAC.

Automated Image Analysis for the Detection of Benthic Crustaceans and Bacterial Mat Coverage Using the VENUS Undersea Cabled Network

PubMed Central

Aguzzi, Jacopo; Costa, Corrado; Robert, Katleen; Matabos, Marjolaine; Antonucci, Francesca; Juniper, S. Kim; Menesatti, Paolo

2011-01-01

The development and deployment of sensors for undersea cabled observatories is presently biased toward the measurement of habitat variables, while sensor technologies for biological community characterization through species identification and individual counting are less common. The VENUS cabled multisensory network (Vancouver Island, Canada) deploys seafloor camera systems at several sites. Our objective in this study was to implement new automated image analysis protocols for the recognition and counting of benthic decapods (i.e., the galatheid squat lobster, Munida quadrispina), as well as for the evaluation of changes in bacterial mat coverage (i.e., Beggiatoa spp.), using a camera deployed in Saanich Inlet (103 m depth). For the counting of Munida we remotely acquired 100 digital photos at hourly intervals from 2 to 6 December 2009. In the case of bacterial mat coverage estimation, images were taken from 2 to 8 December 2009 at the same time frequency. The automated image analysis protocols for both study cases were created in MatLab 7.1. Automation for Munida counting incorporated the combination of both filtering and background correction (Median- and Top-Hat Filters) with Euclidean Distances (ED) on Red-Green-Blue (RGB) channels. The Scale-Invariant Feature Transform (SIFT) features and Fourier Descriptors (FD) of tracked objects were then extracted. Animal classifications were carried out with the tools of morphometric multivariate statistic (i.e., Partial Least Square Discriminant Analysis; PLSDA) on Mean RGB (RGBv) value for each object and Fourier Descriptors (RGBv+FD) matrices plus SIFT and ED. The SIFT approach returned the better results. Higher percentages of images were correctly classified and lower misclassification errors (an animal is present but not detected) occurred. In contrast, RGBv+FD and ED resulted in a high incidence of records being generated for non-present animals. Bacterial mat coverage was estimated in terms of Percent Coverage and Fractal Dimension. A constant Region of Interest (ROI) was defined and background extraction by a Gaussian Blurring Filter was performed. Image subtraction within ROI was followed by the sum of the RGB channels matrices. Percent Coverage was calculated on the resulting image. Fractal Dimension was estimated using the box-counting method. The images were then resized to a dimension in pixels equal to a power of 2, allowing subdivision into sub-multiple quadrants. In comparisons of manual and automated Percent Coverage and Fractal Dimension estimates, the former showed an overestimation tendency for both parameters. The primary limitations on the automatic analysis of benthic images were habitat variations in sediment texture and water column turbidity. The application of filters for background corrections is a required preliminary step for the efficient recognition of animals and bacterial mat patches. PMID:22346657

INNOVATIVE TECHNOLOGY VERIFICATION REPORT XRF TECHNOLOGIES FOR MEASURING TRACE ELEMENTS IN SOIL AND SEDIMENT OXFORD ED2000 XRF ANALYZER

EPA Science Inventory

The Oxford ED2000 x-ray fluorescence (XRF) analyzer was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The field portion of the demonstration was conducted in January 2005 at the Kennedy Athletic, Recr...

Climate Change Impacts on Electricity Demand and Supply in the United States: A Multi-Model Comparison

EPA Science Inventory

This paper compares the climate change impacts on U.S. electricity demand and supply from three models: the Integrated Planning Model (IPM), the Regional Energy Deployment System (ReEDS) model, and GCAM. Rising temperatures cause an appreciable net increase in electricity demand....

ARC-2001-ACD01-0018

NASA Image and Video Library

2001-02-16

New Center Network Deployment ribbon Cutting: from left to right: Maryland Edwards, Code JT upgrade project deputy task manager; Ed Murphy, foundry networks systems engineer; Bohdan Cmaylo, Code JT upgrade project task manager, Scott Santiago, Division Chief, Code JT; Greg Miller, Raytheon Network engineer and Frank Daras, Raytheon network engineering manager.

Omaha Metropolitan Area, ITS Early Deployment Planning Study, Strategic Deployment Plan, Appendices E: Deployment Scenarios, F: Project Descriptions, G: Support Technologies, H: Cost Estimate Assumptions

DOT National Transportation Integrated Search

1995-12-15

THE OBJECTIVE OF THE OMAHA INTELLIGENT TRANSPORTATION (ITS) EARLY DEPLOYMENT STUDY IS TO DEVELOP A STRATEGIC PLAN FOR THE DEPLOYMENT OF ITS TECHNOLOGIES IN THE OMAHA METROPOLITAN AREA. THE PLAN WILL IDENTIFY THE ITS USER SERVICES THAT WILL BE MOST BE...

SunShot 2030 for Photovoltaics (PV): Envisioning a Low-cost PV Future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley J.; Frew, Bethany A.; Gagnon, Pieter J.

In this report we summarize the implications, impacts, and deployment potential of reaching the SunShot 2030 targets for the electricity system in the contiguous United States. We model 25 scenarios of the U.S. power sector using the Regional Energy Deployment Systems (ReEDS) and Distributed Generation (dGen) capacity expansion models. The scenarios cover a wide range of sensitivities to capture future uncertainties relating to fuel prices, retirements, renewable energy capital costs, and load growth. We give special attention to the potential for storage costs to also rapidly decline due to its large synergies with low-cost solar. The ReEDS and dGen modelsmore » project utility- and distributed-scale power sector evolution, respectively, for the United States. Both models have been designed with special emphasis on capturing the unique traits of renewable energy, including variability and grid integration requirements. Across the suite of scenarios modeled, we find that reaching the SunShot 2030 target has the potential to lead to significant capacity additions of PV in the United States. By 2050, PV penetration levels are projected to reach 28-46 percent of total generation. If storage also sees significant reductions in cost, then the 2050 solar penetration levels could reach 41-64 percent. PV deployment is projected to occur in all of the lower 48 states, though the specific deployment level is scenario dependent. The growth in PV is projected to be dominated by utility-scale systems, but the actual mix between utility and distributed systems could ultimately vary depending on how policies, system costs, and rate structures evolve.« less

Modeling water resources as a constraint in electricity capacity expansion models

NASA Astrophysics Data System (ADS)

Newmark, R. L.; Macknick, J.; Cohen, S.; Tidwell, V. C.; Woldeyesus, T.; Martinez, A.

2013-12-01

In the United States, the electric power sector is the largest withdrawer of freshwater in the nation. The primary demand for water from the electricity sector is for thermoelectric power plant cooling. Areas likely to see the largest near-term growth in population and energy usage, the Southwest and the Southeast, are also facing freshwater scarcity and have experienced water-related power reliability issues in the past decade. Lack of water may become a barrier for new conventionally-cooled power plants, and alternative cooling systems will impact technology cost and performance. Although water is integral to electricity generation, it has long been neglected as a constraint in future electricity system projections. Assessing the impact of water resource scarcity on energy infrastructure development is critical, both for conventional and renewable energy technologies. Efficiently utilizing all water types, including wastewater and brackish sources, or utilizing dry-cooling technologies, will be essential for transitioning to a low-carbon electricity system. This work provides the first demonstration of a national electric system capacity expansion model that incorporates water resources as a constraint on the current and future U.S. electricity system. The Regional Electricity Deployment System (ReEDS) model was enhanced to represent multiple cooling technology types and limited water resource availability in its optimization of electricity sector capacity expansion to 2050. The ReEDS model has high geographic and temporal resolution, making it a suitable model for incorporating water resources, which are inherently seasonal and watershed-specific. Cooling system technologies were assigned varying costs (capital, operations and maintenance), and performance parameters, reflecting inherent tradeoffs in water impacts and operating characteristics. Water rights supply curves were developed for each of the power balancing regions in ReEDS. Supply curves include costs and availability of freshwater (surface and groundwater) and alternative water resources (municipal wastewater and brackish groundwater). In each region, a new power plant must secure sufficient water rights for operation before being built. Water rights constraints thus influence the type of power plant, cooling system, or location of new generating capacity. Results indicate that the aggregate national generating capacity by fuel type and associated carbon dioxide emissions change marginally with the inclusion of water rights. Water resource withdrawals and consumption, however, can vary considerably. Regional water resource dynamics indicate substantial differences in the location where power plant-cooling system technology combinations are built. These localized impacts highlight the importance of considering water resources as a constraint in the electricity sector when evaluating costs, transmission infrastructure needs, and externalities. Further scenario evaluations include assessments of how climate change could affect the availability of water resources, and thus the development of the electricity sector.

Point-of-care Cognitive Support Technology in Emergency Departments: A Scoping Review of Technology Acceptance by Clinicians.

PubMed

Jun, Shelly; Plint, Amy C; Campbell, Sandy M; Curtis, Sarah; Sabir, Kyrellos; Newton, Amanda S

2018-05-01

Cognitive support technologies that support clinical decisions and practices in the emergency department (ED) have the potential to optimize patient care. However, limited uptake by clinicians can prevent successful implementation. A better understanding of acceptance of these technologies from the clinician perspective is needed. We conducted a scoping review to synthesize diverse, emerging evidence on clinicians' acceptance of point-of-care (POC) cognitive support technology in the ED. We systematically searched 10 electronic databases and gray literature published from January 2006 to December 2016. Studies of any design assessing an ED-based POC cognitive support technology were considered eligible for inclusion. Studies were required to report outcome data for technology acceptance. Two reviewers independently screened studies for relevance and quality. Study quality was assessed using the Mixed-Methods Appraisal Tool. A descriptive analysis of the features of POC cognitive support technology for each study is presented, illustrating trends in technology development and evaluation. A thematic analysis of clinician, technical, patient, and organizational factors associated with technology acceptance is also presented. Of the 1,563 references screened for eligibility, 24 met the inclusion criteria and were included in the review. Most studies were published from 2011 onward (88%), scored high for methodologic quality (79%), and examined POC technologies that were novel and newly introduced into the study setting (63%). Physician use of POC technology was the most commonly studied (67%). Technology acceptance was frequently conceptualized and measured by factors related to clinician attitudes and beliefs. Experience with the technology, intention to use, and actual use were also more common outcome measures of technology acceptance. Across studies, perceived usefulness was the most noteworthy factor impacting technology acceptance, and clinicians generally had positive perceptions of the use of POC cognitive support technology in the ED. However, the actual use of POC cognitive support technology reported by clinicians was low-use, by proportion of patient cases, ranged from 30% to 59%. Of the 24 studies, only two studies investigated acceptance of POC cognitive support technology currently implemented in the ED, offering "real-world" clinical practice data. All other studies focused on acceptance of novel technologies. Technical aspects such as an unfriendly user interface, presentation of redundant or ambiguous information, and required user effort had a negative impact on acceptance. Patient expectations were also found to have a negative impact, while patient safety implications had a positive impact. Institutional support was also reported to impact technology acceptance. Findings from this scoping review suggest that while ED clinicians acknowledge the utility and value of using POC cognitive support technology, actual use of such technology can be low. Further, few studies have evaluated the acceptance and use of POC technologies in routine care. Prospective studies that evaluate how ED clinicians appraise and consider POC technology use in clinical practice are now needed with diverse clinician samples. While this review identified multiple factors contributing to technology acceptance, determining how clinician, technical, patient, and organizational factors mediate or moderate acceptance should also be a priority. © 2017 by the Society for Academic Emergency Medicine.

ReEDS-Mexico: A Capacity Expansion Model of the Mexican Power System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ho, Jonathan L; Cole, Wesley J; Spyrou, Evangelia

This report documents the ReEDS-Mexico capacity expansion model, which is an extension of the ReEDS model to the Mexican power system. In recent years Mexico’s power sector has undergone considerable reform that has significant potential to impact the future electricity mix (Alpizar–Castro and Rodríguez–Monroy 2016). Day-ahead and real-time trading in Mexico’s power markets opened in early 2016. In addition to this reform, Mexico is striving to ensure that 35% of its electricity is generated from clean energy sources by 2024, 40% by 2035, and 50% by 2050 (Presidencia de la República 2016). These rapid changes in both the market andmore » the generation mix create a need for robust tools that can help electricity sector stakeholders make informed decisions. The purpose of this report is to document the extension of the National Renewable Energy Laboratory’s (NREL’s) Regional Energy Deployment System (ReEDS) model (Eurek et al. 2016) to cover the Mexico power system. This extension, which we will refer to throughout this paper as ReEDS-Mexico, provides a model of the Mexico power sector using a system-wide, least-cost optimization framework.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.J.

The author outlines what he considers to be the key environmental issues affecting Clean Coal Technology (CCT) deployment both in the US and internationally. Since the international issues are difficult to characterize given different environmental drivers in various countries and regions, the primary focus of his remarks is on US deployment. However, he makes some general remarks, particularly regarding the environmental issues in developing vs. developed countries and how these issues may affect CCT deployment. Further, how environment affects deployment depends on which particular type of clean coal technology one is addressing. It is not the author`s intention to mentionmore » many specific technologies other than to use them for the purposes of example. He generally categorizes CCTs into four groups since environment is likely to affect deployment for each category somewhat differently. These four categories are: Precombustion technologies such as coal cleaning; Combustion technologies such as low NOx burners; Postcombustion technologies such as FGD systems and postcombustion NOx control; and New generation technologies such as gasification and fluidized bed combustion.« less

Social Acceptance of Wind Energy: Managing and Evaluating Its Market Impacts (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baring-Gould, I.

2012-06-01

As with any industrial-scale technology, wind power has impacts. As wind technology deployment becomes more widespread, a defined opposition will form as a result of fear of change and competing energy technologies. As the easy-to-deploy sites are developed, the costs of developing at sites with deployment barriers will increase, therefore increasing the total cost of power. This presentation provides an overview of wind development stakeholders and related stakeholder engagement questions, Energy Department activities that provide wind project deployment information, and the quantification of deployment barriers and costs in the continental United States.

Modeling Incremental Initial Active Duty Continuation Probabilities in the Selected Marine Corps Reserve

DTIC Science & Technology

2014-03-01

Regression. 2nd ed. Hoboken, NJ: John Wiley & Sons, 2000. Lien, Dianna, Aline Quester, and Robert Shuford, Marine Corps Deployment Tempo and Retention...calhoun.nps.edu/public/bitstream/handle/10945/5778/11Mar_Lizarraga.pdf? sequence=1 Quester, Aline , Laura Kelley, Cathy Hiatt, and Robert Shoford. Marine

Highly Selective Nuclide Removal from the R-Reactor Disassembly Basin at the SRS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pickett, J. B.; Austin, W. E.; Dukes, H. H.

This paper describes the results of a deployment of highly selective ion-exchange resin technologies for the in-situ removal of Cs-137 and Sr-90 from the Savannah River Site (SRS) R-Reactor Disassembly Basin. The deployment was supported by the DOE Office of Science and Technology's (OST, EM-50) National Engineering Technology Laboratory (NETL), as a part of an Accelerated Site Technology Deployment (ASTD) project. The Facilities Decontamination and Decommissioning (FDD) Program at the SRS conducted this deployment as a part of an overall program to deactivate three of the site's five reactor disassembly basins.

Highly Selective Nuclide Removal from the R-Reactor Disassembly Basin at SRS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pickett, J.B.

This paper describes the results of a deployment of highly selective ion-exchange resin technologies for the in-situ removal of Cs-137 and Sr-90 from the Savannah River Site (SRS) R-Reactor Disassembly Basin. The deployment was supported by the DOE Office of Science and Technology's (OST, EM-50) National Engineering Technology Laboratory (NETL), as a part of an Accelerated Site Technology Deployment (ASTD) project. The Facilities Decontamination and Decommissioning (FDD) Program at the SRS conducted this deployment as a part of an overall program to deactivate three of the site's five reactor disassembly basins

Disturbances of Higher Level Neural Control-Robotic Applications in Stroke

DTIC Science & Technology

2001-10-25

Interim Results on the Follow-up of 76 Patients and on Movement Performance Indices, In: Mounir Mokhtari (ed); Integration of Assistive Technology in the...the Nervous System’s Adaptive Mechanisms, In: Mounir Mokhtari (ed); Integration of Assistive Technology in the Information Age; IOS Press, Assistive

Electrodynamic Dust Shield for Space Applications

NASA Technical Reports Server (NTRS)

Mackey, Paul J.; Johansen, Michael R.; Olsen, Robert C.; Raines, Matthew G.; Phillips, James R., III; Cox, Rachel E.; Hogue, Michael D.; Calle, Carlos I.; Pollard, Jacob R. S.

2016-01-01

The International Space Exploration Coordination Group (ISECG) has chosen dust mitigation technology as a Global Exploration Roadmap (GER) critical technology need in order to reduce life cycle cost and risk, and increase the probability of mission success. NASA has also included Particulate Contamination Prevention and Mitigation as a cross-cutting technology to be developed for contamination prevention, cleaning and protection. This technology has been highlighted due to the detrimental effect of dust on both human and robotic missions. During manned Apollo missions, dust caused issues with both equipment and crew. Contamination of equipment caused many issues including incorrect instrument readings and increased temperatures due to masking of thermal radiators. The astronauts were directly affected by dust that covered space suits, obscured face shields and later propagated to the cabin and into the crew's eyes and lungs. Robotic missions on Mars were affected when solar panels were obscured by dust thereby reducing the effectiveness of the solar panels. The Electrostatics and Surface Physics Lab in Swamp Works at the Kennedy Space Center has been developing an Electrodynamic Dust Shield (EDS) to remove dust from multiple surfaces, including glass shields and thermal radiators. This technology has been tested in lab environments and has evolved over several years. Tests of the technology include reduced gravity flights (6g) in which Apollo Lunar dust samples were successfully removed from glass shields while under vacuum (1 millipascal). Further development of the technology is underway to reduce the size of the EDS as well as to perform material and component testing outside of the International Space Station (ISS) on the Materials on International Space Station Experiment X (MISSE-X). This experiment is designed to verify that the EDS can withstand the harsh environment of space and will look to closely replicate the solar environment experienced on the moon. A second flight opportunity exists to provide an EDS to several companies as part of NASA's Lunar CATALYST program. The current mission concept would fly the EDS on the footpad of one of the Lunar CATALYST vehicles. To determine the effectiveness of the EDS system, image analysis will be performed on the footpad before, during and after EDS activation. If successful in these test flights, the Technology Readiness Level (TRL) of the EDS will be raised to a sufficient level to be used in the protection of mission equipment for future NASA and commercial missions to the moon, asteroids, and Mars.

Adaptable, Deployable Entry and Placement Technology (ADEPT) for Future Mars Missions

NASA Technical Reports Server (NTRS)

Wercinski, P.; Venkatapathy, E.; Gage, P.; Prabhu, D.; Smith, B.; Cassell, A.; Yount, B.; Allen, G.

2013-01-01

The concept of a mechanically deploy- able hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets.

A Study on Attitude and Opinion towards Using Computer Technology in Teaching among B.Ed. Trainees in Tiruchirappalli District

ERIC Educational Resources Information Center

Kumar, C. Ashok

2015-01-01

The main aim of the study was to find out whether there was a significant difference in the attitude and opinion towards using Computer Technology in teaching among B.Ed., trainees in terms of select independent variables. Normative survey was the technique employed. Opinion towards Computer Usage and Attitude towards Computer Technology inventory…

State perspectives on clean coal technology deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moreland, T.

1997-12-31

State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

Health Information Technology Adoption in the Emergency Department.

PubMed

Selck, Frederic W; Decker, Sandra L

2016-02-01

To describe the trend in health information technology (IT) systems adoption in hospital emergency departments (EDs) and its effect on ED efficiency and resource use. 2007-2010 National Hospital Ambulatory Medical Care Survey - ED Component. We assessed changes in the percent of visits to EDs with health IT capability and the estimated effect on waiting time to see a provider, visit length, and resource use. The percent of ED visits that took place in an ED with at least a basic health IT or an advanced IT system increased from 25.2 and 3.1 percent in 2007 to 69.1 and 30.6 percent in 2010, respectively (p < .05). Controlling for ED fixed effects, waiting times were reduced by 6.0 minutes in advanced IT-equipped EDs (p < .05), and the number of tests ordered increased by 9 percent (p < .01). In models using a 1-year lag, advanced systems also showed an increase in the number of medications and images ordered per visit. Almost a third of visits now occur in EDs with advanced IT capability. While advanced IT adoption may decrease wait times, resource use during ED visits may also increase depending on how long the system has been in place. We were not able to determine if these changes indicated more appropriate care. © Health Research and Educational Trust.

[Economics and equity in urgency and emergency care].

PubMed

Moreno-Millán, E; Tejedor-Fernández, M; Torres-Murillo, J M; García-Torrecillas, J M; Cid-Cumplido, M; Villegas-del Ojo, J; García-Fernández, A M

2010-01-01

The financial sustainability of public health systems (PHS) is currently threatened by population growth, increased prevalence of chronic conditions and disabilities, inequality in access and use of resources, zero cost delivery and global economic crisis. The emergency department (ED) is one for which demand is highest--without relation to the health model--because disease becomes established in disadvantaged socio-demographic areas and inequalities, hyperconsumption and decision making more closely linked to the user are maintained. The medical device of ED is a multiple one and its diverse product lines make it difficult to measure. This review discusses the need to deploy measurement tools in ED, where there are high direct costs--primarily structural--and other variables related to the activity, where the marginal cost is higher than the average and there is no economy of scale in such interventions. The possible mechanisms of private copayment in financing the supply of EDs are also studied, showing their advantages and disadvantages, with the conclusion that they are not recommendable--due to their scarce fund raising and deterrent capacity, which is why fundamental strategic changes in the management of these resources are needed.

Effects of Two Different Types of Physics Learning on the Results of CLASS Test

ERIC Educational Resources Information Center

Marusic, Mirko; Slisko, Josip

2012-01-01

During a one-semester-long research project with high school students, we deployed and gauged efficiency of two different reform teaching methods: reading, presenting, and questioning (RPQ) and experimenting and discussion (ED). In this paper we report on changes in students' attitudes and beliefs about physics and learning physics. We used the…

Security-by-Experiment: Lessons from Responsible Deployment in Cyberspace.

PubMed

Pieters, Wolter; Hadžiosmanović, Dina; Dechesne, Francien

2016-06-01

Conceiving new technologies as social experiments is a means to discuss responsible deployment of technologies that may have unknown and potentially harmful side-effects. Thus far, the uncertain outcomes addressed in the paradigm of new technologies as social experiments have been mostly safety-related, meaning that potential harm is caused by the design plus accidental events in the environment. In some domains, such as cyberspace, adversarial agents (attackers) may be at least as important when it comes to undesirable effects of deployed technologies. In such cases, conditions for responsible experimentation may need to be implemented differently, as attackers behave strategically rather than probabilistically. In this contribution, we outline how adversarial aspects are already taken into account in technology deployment in the field of cyber security, and what the paradigm of new technologies as social experiments can learn from this. In particular, we show the importance of adversarial roles in social experiments with new technologies.

An Analysis of Professional Practice Ed.D. Dissertations in Educational Technology

ERIC Educational Resources Information Center

Dawson, Kara; Kumar, Swapna

2014-01-01

The University of Florida offers an online professional practice Ed.D. focused on Educational Technology. Twenty-three students have completed professional practice dissertations and graduated since the program's inception in 2008. The purpose of this article is to share what these dissertations have looked like and to begin a dialogue about…

The Rise and Fall of Swedish Educational Technology 1960-1980

ERIC Educational Resources Information Center

Wallin, Erik

2005-01-01

In Sweden educational technology (EdTech) prospered during the 1960s and 1970s inspired by US experiences from primarily programmed instruction. The Departments of Education at the universities started different activities of research and other bodies developed EdTech products for commercial use. In some business firms in-service training of staff…

Deployment Mechanism for the Space Technology 5 Micro Satellite

NASA Technical Reports Server (NTRS)

Rossoni, Peter; Cooperrider, Caner; Durback, Gerard

2004-01-01

Space Technology 5 (ST5) is a technology mission that will send three spin-stabilized, 25-kg satellites into a highly elliptical Earth orbit. Each of these satellites must be deployed separately from the same launch vehicle with a spin rate of 3.4 rads (32.4 rpm). Because of the satellite's small size and the requirement to achieve its mission spin rate on deploy, typical spin table, pyrotechnic deployment devices or spin up thrusters could not be used. Instead, this new mechanism design employs a "Frisbee" spin up strategy with a shape memory alloy actuated Pinpuller to deploy each satellite. The mechanism has undergone several design and test iterations and has been successfully qualified for flight.

Deployment Mechanism for the Space Technology 5 Micro Satellite

NASA Technical Reports Server (NTRS)

Rossoni, Peter; Cooperrider, Caner; Durback, Gerard

2004-01-01

Space Technology 5 (ST5) is a technology mission that will send three spin-stabilized, 25-kg satellites into a highly elliptical Earth orbit. Each of these satellites must be deployed separately from the same launch vehicle with a spin rate of 3.4 rad/s (32.4 rpm). Because of the satellite's small size and the requirement to achieve its mission spin rate on deploy, typical spin table, pyrotechnic deployment devices or spin up thrusters could not be used. Instead, this new mechanism design employs a 'Frisbee' spin up strategy with a shape memory alloy actuated Pinpuller to deploy each satellite. The mechanism has undergone several design and test iterations and has been successfully qualified for flight.

Development of a verification program for deployable truss advanced technology

NASA Technical Reports Server (NTRS)

Dyer, Jack E.

1988-01-01

Use of large deployable space structures to satisfy the growth demands of space systems is contingent upon reducing the associated risks that pervade many related technical disciplines. The overall objectives of this program was to develop a detailed plan to verify deployable truss advanced technology applicable to future large space structures and to develop a preliminary design of a deployable truss reflector/beam structure for use a a technology demonstration test article. The planning is based on a Shuttle flight experiment program using deployable 5 and 15 meter aperture tetrahedral truss reflections and a 20 m long deployable truss beam structure. The plan addresses validation of analytical methods, the degree to which ground testing adequately simulates flight and in-space testing requirements for large precision antenna designs. Based on an assessment of future NASA and DOD space system requirements, the program was developed to verify four critical technology areas: deployment, shape accuracy and control, pointing and alignment, and articulation and maneuvers. The flight experiment technology verification objectives can be met using two shuttle flights with the total experiment integrated on a single Shuttle Test Experiment Platform (STEP) and a Mission Peculiar Experiment Support Structure (MPESS). First flight of the experiment can be achieved 60 months after go-ahead with a total program duration of 90 months.

Understanding the health care utilization of children who require medical technology: A descriptive study of children who require tracheostomies.

PubMed

Spratling, Regena

2017-04-01

Children who require medical technology have complex chronic illnesses. This medical technology, including ventilators, oximeters, tracheostomy tubes, and feeding tubes, allows children and their families to live at home; however, the management of the children's care by informal caregivers is complex with the need for intensive, specialized care. The purpose of this study was to examine the sociodemographic and clinical characteristics that affect health care utilization in a population of children who require medical technology. A retrospective electronic health record (EHR) review was completed on the EHR records on 171 children who require medical technology, specifically tracheostomies, at an outpatient technology dependent pulmonary clinic over a three year period (January 2010-December 2012). Descriptive statistics were used to analyze sociodemographic and clinical characteristics, including medical diagnoses, and emergency department (ED) visits and hospitalizations. Of the 171 children requiring medical technology studied, there were numerous medical diagnoses (n=791), 99% had chronic illnesses affecting two or more body systems, and 88% required two or more technologies, including a tracheostomy and a feeding tube. In addition, 91% of the children had at least one ED visit or hospitalization and were treated in the ED approximately three times over the three year period. The findings from this study noted an increased utilization of health care by these children, and identified common symptoms and medical technologies for which caregivers may need interventions, focusing on education in managing symptoms and medical technology prior to presentation to the ED or hospital. Copyright © 2017 Elsevier Inc. All rights reserved.

Non-Constant Learning Rates in Retrospective Experience Curve Analyses and their Correlation to Deployment Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Max; Smith, Sarah J.; Sohn, Michael D.

2015-07-16

A key challenge for policy-makers and technology market forecasters is to estimate future technology costs and in particular the rate of cost reduction versus production volume. A related, critical question is what role should state and federal governments have in advancing energy efficient and renewable energy technologies? This work provides retrospective experience curves and learning rates for several energy-related technologies, each of which have a known history of federal and state deployment programs. We derive learning rates for eight technologies including energy efficient lighting technologies, stationary fuel cell systems, and residential solar photovoltaics, and provide an overview and timeline ofmore » historical deployment programs such as state and federal standards and state and national incentive programs for each technology. Piecewise linear regimes are observed in a range of technology experience curves, and public investments or deployment programs are found to be strongly correlated to an increase in learning rate across multiple technologies. A downward bend in the experience curve is found in 5 out of the 8 energy-related technologies presented here (electronic ballasts, magnetic ballasts, compact fluorescent lighting, general service fluorescent lighting, and the installed cost of solar PV). In each of the five downward-bending experience curves, we believe that an increase in the learning rate can be linked to deployment programs to some degree. This work sheds light on the endogenous versus exogenous contributions to technological innovation and highlights the impact of exogenous government sponsored deployment programs. This work can inform future policy investment direction and can shed light on market transformation and technology learning behavior.« less

Nano Entry System for CubeSat-Class Payloads Project (Nano-ADEPT)

NASA Technical Reports Server (NTRS)

Smith, Brandon Patrick

2014-01-01

This project is developing a mechanically deployed system through a mission application study, deployment/ejection testing, and wind tunnel testing. Adaptable Deployable Entry and Placement Technology (ADEPT) has been under development at NASA since 2011. Nano-ADEPT is the application of this revolutionary entry technology for small spacecraft. The unique capability of ADEPT for small science payloads comes from its ability to stow within a slender volume and deploy passively to achieve a mass-efficient drag surface with a high heat rate capability. Near-term applications for this technology include return of small science payloads or CubeSat technology from Low Earth Orbit (LEO) and delivery of secondary payloads to the surface of Mars.

An Architecture for a Problem-Solving Assessment Authoring and Delivery System

DTIC Science & Technology

2006-06-01

know it works? In J. Willis (Series Ed.) & W. F. Heinecke & L. Blasi (Vol. Eds.), Research methods for educational technology: Vol. 1. Methods of...use of formal assessment in the classroom. In W. Hawley (Ed.) (with D. L. Rollie), The keys to effective schools: Educational reform as continuous

The Sound of Freedom. Naval Weapons Technology at Dahlgren, Virginia, 1918-2006

DTIC Science & Technology

2006-01-01

the TRINITY device, before later succeeding J. Robert Oppenheimer as the director of Los Alamos National Laboratory. Other former Dahlgren...and the Computer (Cambridge, Mass.: The MIT Press, 1999); Michael R. Williams, A History of Computing Technology, 2nd ed. ( Los Alamos , Calif.: IEEE...Minutes of Advisory Council. 3. Ibid. 4. Ibid.; Michael R. Williams, A History of Computing Technology, 2nd ed. ( Los Alamos , Calif.: IEEE Computer

Energy storage deployment and innovation for the clean energy transition

NASA Astrophysics Data System (ADS)

Kittner, Noah; Lill, Felix; Kammen, Daniel M.

2017-09-01

The clean energy transition requires a co-evolution of innovation, investment, and deployment strategies for emerging energy storage technologies. A deeply decarbonized energy system research platform needs materials science advances in battery technology to overcome the intermittency challenges of wind and solar electricity. Simultaneously, policies designed to build market growth and innovation in battery storage may complement cost reductions across a suite of clean energy technologies. Further integration of R&D and deployment of new storage technologies paves a clear route toward cost-effective low-carbon electricity. Here we analyse deployment and innovation using a two-factor model that integrates the value of investment in materials innovation and technology deployment over time from an empirical dataset covering battery storage technology. Complementary advances in battery storage are of utmost importance to decarbonization alongside improvements in renewable electricity sources. We find and chart a viable path to dispatchable US$1 W-1 solar with US$100 kWh-1 battery storage that enables combinations of solar, wind, and storage to compete directly with fossil-based electricity options.

White Paper on Dish Stirling Technology: Path Toward Commercial Deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andraka, Charles E.; Stechel, Ellen; Becker, Peter

2016-07-01

Dish Stirling energy systems have been developed for distributed and large-scale utility deployment. This report summarizes the state of the technology in a joint project between Stirling Energy Systems, Sandia National Laboratories, and the Department of Energy in 2011. It then lays out a feasible path to large scale deployment, including development needs and anticipated cost reduction paths that will make a viable deployment product.

Interim Report on Ed Tech PILOTS. A Report to the 78th Texas Legislature from the Texas Education Agency.

ERIC Educational Resources Information Center

Texas Education Agency, Austin.

The primary goals of the Texas Education Agency's Educational Technologies Providing Increased Learning Opportunities for Texas Students (Ed Tech PILOTS) are to employ technology to more efficiently and effectively delivery information to students and teachers to enhance the efficacy of classroom instruction. This interim report discusses the…

Developing Scientific Literacy Skills through Interdisciplinary, Technology-Based Global Simulations: GlobalEd 2

ERIC Educational Resources Information Center

Lawless, Kimberly A.; Brown, Scott W.

2015-01-01

GlobalEd 2 (GE2) is a set of technology-mediated, problem-based learning (PBL) simulations for middle-grade students, that capitalises on the multidisciplinary nature of the social sciences as an expanded curricular space for students to learn and apply scientific literacies and concepts, while simultaneously also enriching their understanding of…

ITS technology adoption and observed market trends from ITS deployment tracking.

DOT National Transportation Integrated Search

2010-08-03

This report examines the market dynamics and benefits associated with the deployment and diffusion of Intelligent Transportation Systems (ITS) technologies across the United States. For several ITS technologies, the current market structure, events t...

Environmental Baseline Survey Report for the Title Transfer of Parcel ED-9 at the East Tennessee Technology Park, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

SAIC

2010-05-01

This environmental baseline survey (EBS) report documents the baseline environmental conditions of the U. S. Department of Energy's (DOE's) Parcel ED-9 at the East Tennessee Technology Park (ETTP). Parcel ED-9 consists of about 13 acres that DOE proposes to transfer to Heritage Center, LLC (hereafter referred to as 'Heritage Center'), a subsidiary of the Community Reuse Organization of East Tennessee (CROET). The 13 acres include two tracts of land, referred to as ED-9A (7.06 acres) and ED-9B (5.02 acres), and a third tract consisting of about 900 linear feet of paved road and adjacent right-of-way, referred to as ED-9C (0.98more » acres). Transfer of the title to ED-9 will be by deed under a Covenant Deferral Request (CDR) pursuant to Section 120(h)(3)(C) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). This report provides a summary of information to support the transfer of this government-owned property at ETTP to a non-federal entity.« less

Mount Sinai leverages smartphone technology, aiming to boost care, coordination of ED patients while also trimming costs.

PubMed

2015-05-01

Mount Sinai Hospital in New York, NY, is using smartphone technology to enhance follow-up calls to senior patients who have visited the ED, and to help provide acute-level care to select patients in their own homes. Investigators are hoping to show that these approaches can improve care and coordination while trimming costs, and they expect that patients will approve of these new approaches as well. While senior patients are still in the ED, nurse coordinators will work with them to load a HIPAA-compliant application to their smartphones so they can conduct face-to-face follow-up calls that meet HIPAA standards. Nurses say the face-to-face communications enhance their ability to assess how patients are doing following their ED visit. The hospital is also testing a program that enables some ED patients who meet inpatient criteria to receive this care in the home setting through the use of a mobile acute care team (MACT). In the case of emergencies, the MACT team relies on community paramedics who will visit the patients' homes and provide care under the direction of MACT physicians who are linked in to these visits via smartphone technology.

ITS strategic deployment plan : Nashville area intelligent transportation systems early deployment study. Technical memorandum no. 8, Final report

DOT National Transportation Integrated Search

1997-03-01

The goal of this study was to develop a Strategic Plan for deployment of ITS technologies within the Nashville Metro Area and to create a long-term coalition of ITS stakeholders, with the objective of expanding the implementation of ITS technologies ...

Technology development for deployable aerodynamic decelerators at Mars

NASA Astrophysics Data System (ADS)

Masciarelli, James P.

2002-01-01

Parachutes used for Mars landing missions are only certified for deployment at Mars behind blunt bodies flying at low angles of attack, Mach numbers up to 2.2, and dynamic pressures of up to 800 Pa. NASA is currently studying entry vehicle concepts for future robotic missions to Mars that would require parachutes to be deployed at higher Mach numbers and dynamic pressures. This paper demonstrates the need for expanding the parachute deployment envelope, and describes a three-phase technology development activity that has been initiated to address the need. The end result of the technology development program will be a aerodynamic decelerator system that can be deployed at Mach numbers of up to 3.1 and dynamic pressures of up to 1400 Pa. .

Technology Development for Deployable Aerodynamic Decelerators at Mars

NASA Technical Reports Server (NTRS)

Masciarelli, James P.

2002-01-01

Parachutes used for Mars landing missions are only certified for deployment at Mars behind blunt bodies flying at low angles of attack, Mach numbers up to 2.2, and dynamic pressures of up to 800 Pa. NASA is currently studying entry vehicle concepts for future robotic missions to Mars that would require parachutes to be deployed at higher Mach numbers and dynamic pressures. This paper demonstrates the need for expanding the parachute deployment envelope, and describes a three-phase technology development activity that has been initiated to address the need. The end result of the technology development program will be a aerodynamic decelerator system that can be deployed at Mach numbers of up to 3.1 and dynamic pressures of up to 1400 Pa.

The Army Digital Terrain Catalog II (ADTC)

DTIC Science & Technology

2006-06-01

Engineering (Eds.). Readings for Systems Engineering & Engineering Management. Mason, OH: Thomson Customer Publishing, 2004, p. 2. [3] E. von Hippel ...responsive, deployable, agile, versatile, lethal, survivable, and sustainable force. --Former Army Chief of Staff General Eric Shinseki and former...to advance the tenets of Army Transformation. As former Army Chief of Staff General Eric Shinseki and former Army Secretary Thomas White have stated

Media, Technology Use, and Attitudes: Associations With Physical and Mental Well-Being in Youth With Implications for Evidence-Based Practice.

PubMed

Zeeni, Nadine; Doumit, Rita; Abi Kharma, Joelle; Sanchez-Ruiz, Maria-Jose

2018-05-15

Previous research has shown that the use of technology and media, in their different available forms, may have detrimental effects on the physical and mental well-being of adolescents and young adults. The present study aimed to investigate the use of different types of technology and media, attitudes toward them, and how they relate to physical and mental well-being in Lebanese university students. A descriptive, correlational, cross-sectional design was used. A sample of 244 undergraduates completed a self-report measuring media and technology use and attitudes, eating-related variables (e.g., healthy eating, body image dissatisfaction [BID], and eating disorders [EDs] risk), trait emotional intelligence (TEI), and psychopathology indicators (stress, anxiety, and depression). The use of mobile phone multimedia (music, pictures, and videos) correlated with unhealthy eating and stress. Social media use was associated with BID, EDs risk, and the self-control construct of TEI. Anxiety of separation from technological devices and dependence on them was associated with increased BID, EDs risk, depression, and anxiety. Practical implications are discussed in terms of setting limits and boundaries on technology use during childhood and adolescence, and encouraging healthy eating and physical activity at home and on college campuses. Moreover, social media could be used as a platform for intervention and prevention programs to decrease BID, EDs, depression, and anxiety. © 2018 Sigma Theta Tau International.

Development and Ground Testing of a Compactly Stowed Scalable Inflatably Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Lichodziejewski, David; Derbes, Billy; Reinert, Rich; Belvin, Keith; Slade, Kara; Mann, Troy

2004-01-01

This paper discusses the solar sail design and outlines the interim accomplishments to advance the technology readiness level (TRL) of the subsystem from 3 toward a technology readiness level of 6 in 2005. Under Phase II of the program many component test articles have been fabricated and tested successfully. Most notably an unprecedented section of the conically deployed rigidizable sail support beam, the heart of the inflatable rigidizable structure, has been deployed and tested in the NASA Goddard thermal vacuum chamber with good results. The development testing validated the beam packaging and deployment. The inflatable conically deployed, Sub Tg rigidizable beam technology is now in the TRL 5-6 range. The fabricated masses and structural test results of our beam components have met predictions and no changes to the mass estimates or design assumptions have been identified adding great credibility to the design. Several quadrants of the Mylar sail have also been fabricated and successfully deployed validating our design, manufacturing, and deployment techniques.

A Study on: Exploring U.S. Missile Defense Requirements in 2010: What Are the Policy and Technology Challenges?

DTIC Science & Technology

1997-04-01

technology matures. Mid-course phase Warhead & Booster ■’-=>- penaid deployment burnout v y...phase Warhead & Booster _^, penaid deployment burnout v y^ complete...and penaids fit so equippec I) are deployed immediately following boost phase burnout . • Large deceleration occurs from atmospheric drag upon re

Looking for Patterns in OfStEd Judgements about Primary Pupil Achievement in Design and Technology

ERIC Educational Resources Information Center

Cross, Alan

2006-01-01

Respective English governments have placed considerable faith, political weight and not inconsiderable sums of money in a system of school inspection organised and led by the Office for Standards in Education (OfStEd). This article considers a so-called foundation subject, design and technology, and the extent to which we might meaningfully use…

Accelerating the deployment of energy efficient and renewable energy technologies in South Africa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shickman, Kurt

Purpose of the project was to accelerate the deployment of energy efficient and renewable energy technologies in South Africa. Activities were undertaken to reduce barriers to deployment by improving product awareness for the South African market; market and policy intelligence for U.S. manufacturers; product/service availability; local technical capacity at the workforce, policymaker and expert levels; and ease of conducting business for these technologies/services in the South African market.

Economic Impact of Large-Scale Deployment of Offshore Marine and Hydrokinetic Technology in Oregon Coastal Counties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jimenez, T.; Tegen, S.; Beiter, P.

To begin understanding the potential economic impacts of large-scale WEC technology, the Bureau of Ocean Energy Management (BOEM) commissioned the National Renewable Energy Laboratory (NREL) to conduct an economic impact analysis of largescale WEC deployment for Oregon coastal counties. This report follows a previously published report by BOEM and NREL on the jobs and economic impacts of WEC technology for the entire state (Jimenez and Tegen 2015). As in Jimenez and Tegen (2015), this analysis examined two deployment scenarios in the 2026-2045 timeframe: the first scenario assumed 13,000 megawatts (MW) of WEC technology deployed during the analysis period, and themore » second assumed 18,000 MW of WEC technology deployed by 2045. Both scenarios require major technology and cost improvements in the WEC devices. The study is on very large-scale deployment so readers can examine and discuss the potential of a successful and very large WEC industry. The 13,000-MW is used as the basis for the county analysis as it is the smaller of the two scenarios. Sensitivity studies examined the effects of a robust in-state WEC supply chain. The region of analysis is comprised of the seven coastal counties in Oregon—Clatsop, Coos, Curry, Douglas, Lane, Lincoln, and Tillamook—so estimates of jobs and other economic impacts are specific to this coastal county area.« less

The Usefulness of Information and Communication Technologies in Crisis Response

PubMed Central

Paul, Sharoda A.; Reddy, Madhu; Abraham, Joanna; DeFlitch, Christopher

2008-01-01

Information and communication technologies (ICTs) play a vital role in coordinating crisis response between pre-hospital services and emergency departments of hospitals. In spite of the advances in these technologies, there remain a variety of challenges to their usage during a crisis. To identify these challenges, we conducted focus group interviews with emergency department (ED) and emergency medical services (EMS) personnel. We found that ED and EMS personnel have widely varying perceptions about the usefulness and ease-of-use of information tools and communication tools used in crisis management. We discuss the importance of bringing together communication and information tools into integrated networks of ICTs for effective crisis response. We also highlight design features of ICTs which can support seamless and effective communication and coordination between ED and EMS teams. PMID:18998898

The usefulness of information and communication technologies in crisis response.

PubMed

Paul, Sharoda A; Reddy, Madhu; Abraham, Joanna; DeFlitch, Christopher; Deflitch, Christopher J

2008-11-06

Information and communication technologies (ICTs) play a vital role in coordinating crisis response between pre-hospital services and emergency departments of hospitals. In spite of the advances in these technologies, there remain a variety of challenges to their usage during a crisis. To identify these challenges, we conducted focus group interviews with emergency department (ED) and emergency medical services (EMS) personnel. We found that ED and EMS personnel have widely varying perceptions about the usefulness and ease-of-use of information tools and communication tools used in crisis management. We discuss the importance of bringing together communication and information tools into integrated networks of ICTs for effective crisis response. We also highlight design features of ICTs which can support seamless and effective communication and coordination between ED and EMS teams.

Mobile Health Technology to Communicate Discharge and Follow-Up Information to Adolescents From the Emergency Department.

PubMed

Ray, Margaret; Dayan, Peter S; Pahalyants, Vartan; Chernick, Lauren S

2016-12-01

Adolescents are the largest users of mobile technology; yet, there are little data regarding their receptivity to the use of mobile health technology (mHealth) from the emergency department (ED). The objective of this study was to determine adolescents' preferences for receiving ED discharge and follow-up information via mHealth and factors associated with those preferences. We administered an anonymous self-reporting survey to patients aged 14 to 19 years discharged from an urban pediatric ED. We conducted exploratory bivariate analyses to evaluate differences in communication preferences based on patient characteristics. We used multivariable logistic regression to determine whether preference for health information via mHealth is associated with frequent information technology (IT) use, adjusting for age, sex, ethnicity, and insurance status. Four hundred thirty-nine adolescents completed the survey. Most were female (n = 279, 64%), 14 to 17 years old (n = 247, 57%), Hispanic (n = 359, 86%), and insured (n = 388, 88%). Adolescents used IT often, texting more than 30 times a day (58%) and emailing more than once a day (61%). Most (n = 335, 78%) were interested in electronic communication from the ED. Teens expressed particular interest in using email for discharge instructions (n = 196, 47%), physician referrals (n = 197, 48%), and test results (n = 201, 48%) and using texting for medication (n = 155, 38%) and appointment reminders (n = 170, 41%). Individuals tended to prefer communication with IT modes that they typically used, although only email was independently associated with preference for this mode (adjusted odds ratio, 2.8; 95% confidence interval, 1.5-5.3). Adolescent patients are interested in receiving health information from the ED, mainly via email and texting. Future ED interventions should evaluate the effectiveness of these modalities to communicate with patients after discharge.

A view to the future of natural gas and electricity: An integrated modeling approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley J.; Medlock, Kenneth B.; Jani, Aditya

This paper demonstrates the value of integrating two highly spatially resolved models: the Rice World Gas Trade Model (RWGTM) of the natural gas sector and the Regional Energy Deployment System (ReEDS) model of the U.S. electricity sector. The RWGTM passes electricity-sector natural gas prices to the ReEDS model, while the ReEDS model returns electricity-sector natural gas demand to the RWGTM. The two models successfully converge to a solution under reference scenario conditions. We present electricity-sector and natural gas sector evolution using the integrated models for this reference scenario. This paper demonstrates that the integrated models produced similar national-level results asmore » when running in a stand-alone form, but that regional and state-level results can vary considerably. As we highlight, these regional differences have potentially significant implications for electric sector planners especially in the wake of substantive policy changes for the sector (e.g., the Clean Power Plan).« less

A view to the future of natural gas and electricity: An integrated modeling approach

DOE PAGES

Cole, Wesley J.; Medlock, Kenneth B.; Jani, Aditya

2016-03-17

This paper demonstrates the value of integrating two highly spatially resolved models: the Rice World Gas Trade Model (RWGTM) of the natural gas sector and the Regional Energy Deployment System (ReEDS) model of the U.S. electricity sector. The RWGTM passes electricity-sector natural gas prices to the ReEDS model, while the ReEDS model returns electricity-sector natural gas demand to the RWGTM. The two models successfully converge to a solution under reference scenario conditions. We present electricity-sector and natural gas sector evolution using the integrated models for this reference scenario. This paper demonstrates that the integrated models produced similar national-level results asmore » when running in a stand-alone form, but that regional and state-level results can vary considerably. As we highlight, these regional differences have potentially significant implications for electric sector planners especially in the wake of substantive policy changes for the sector (e.g., the Clean Power Plan).« less

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Report

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…

The Association of Health Literacy With Preventable Emergency Department Visits: A Cross-sectional Study.

PubMed

Balakrishnan, Meenakshi P; Herndon, Jill Boylston; Zhang, Jingnan; Payton, Thomas; Shuster, Jonathan; Carden, Donna L

2017-09-01

Policymakers argue that emergency department (ED) visits for conditions preventable with high-quality outpatient care contribute to waste in the healthcare system. However, access to ambulatory care is uneven, especially for vulnerable populations like minorities, the poor, and those with limited health literacy. The impact of limited health literacy on ED visits that are preventable with timely, high-quality ambulatory care is unknown. The objective was to determine the association of health literacy with preventable ED visits. We conducted an observational cross-sectional study of potentially preventable ED visits (outcome) among adults (≥18 years old) in an ED serving an urban community. We assessed health literacy (predictor) through structured interviews with the Rapid Estimate of Adult Literacy in Medicine (REALM). We recorded age, sex, race, employment, payer, marital and health status, and number of comorbidities through structured interviews or electronic record review. We identified potentially preventable ED visits in the 2 years before the index ED visit by applying Agency for Healthcare Research and Quality technical specifications to identify ambulatory care sensitive conditions using ED discharge diagnoses in hospital administrative data. We used Poisson regression to evaluate the number of preventable ED visits among patients with limited (REALM < 61) versus adequate (REALM ≥ 61) health literacy after adjusting for covariates. Of 1,201 participants, 709 (59%) were female, 370 (31%) were African American, mean age was 41.6 years, and 394 (33%) had limited health literacy. Of 4,444 total ED visits, 423 (9.5%) were potentially preventable. Of these, 260 (61%) resulted in hospital admission and 163 (39%) were treat and release. After covariates were adjusted for, patients with limited literacy had 2.3 (95% confidence interval [CI] = 1.7-3.1) times the number of potentially preventable ED visits resulting in hospital admission compared to individuals with adequate health literacy, 1.4 (95% CI = 1.0-2.0) times the number of treat-and-release visits, and 1.9 (95% CI = 1.5-2.4) times the number of total preventable ED visits. Our results suggest that the ED may be an important site to deploy universal literacy-sensitive precautions and to test literacy-sensitive interventions with the goal of reducing the burden of potentially preventable ED visits on patients and the healthcare system. © 2017 by the Society for Academic Emergency Medicine.

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Wercinski, Paul F.; Beck, Robin A. S.; Hamm, Kenneth R.; Yount, Bryan C.; Makino, A.; Smith, B.; Gage, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term; (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term; and (3) Heavy mass and human missions to Mars in the long term.

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, E.; Wercinski, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (approximately 40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low-mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term and (3) Heavy mass and human missions to Mars in the long term.

History and Flight Devleopment of the Electrodynamic Dust Shield

NASA Technical Reports Server (NTRS)

Johansen, Michael R.; Mackey, Paul J.; Hogue, Michael D.; Cox, Rachel E.; Phillips, James R., III; Calle, Carlos I.

2015-01-01

The surfaces of the moon, Mars, and that of some asteroids are covered with a layer of dust that may hinder robotic and human exploration missions. During the Apollo missions, for example, lunar dust caused a number of issues including vision obscuration, false instrument readings, contamination, and elevated temperatures. In fact, some equipment neared failure after only 75 hours on the lunar surface due to effects of lunar dust. NASA's Kennedy Space Center has developed an active technology to remove dust from surfaces during exploration missions. The Electrodynamic Dust Shield (EDS), which consists of a series of embedded electrodes in a high dielectric strength substrate, uses a low power, low frequency signal that produces an electric field wave that travels across the surface. This non-uniform electric field generates dielectrophoretic and electrostatic forces capable of moving dust out of these surfaces. Implementations of the EDS have been developed for solar radiators, optical systems, camera lenses, visors, windows, thermal radiators, and fabrics The EDS implementation for transparent applications (solar panels, optical systems, windows, etc.) uses transparent indium tin oxide electrodes on glass or transparent lm. Extensive testing was performed in a roughly simulated lunar environment (one-sixth gravity at 1 mPa atmospheric pressure) with lunar simulant dust. EDS panels over solar radiators showed dust removal that restored solar panel output reaching values very close to their initial output. EDS implementations for thermal radiator protection (metallic spacecraft surfaces with white thermal paint and reflective films) were also extensively tested at similar high vacuum conditions. Reflectance spectra for these types of implementations showed dust removal efficiencies in the 96% to 99% range. These tests indicate that the EDS technology is now at a Technology Readiness Level of 4 to 5. As part of EDS development, a flight version is being prepared for several flight opportunities. The flight version of the EDS will incorporate significantly smaller electronics, with an expected mass and volume of 500 g and 350 cm(exp. 3) respectively. One of the opportunities is an International Space Station (ISS) experiment: Materials for International Space Station Experiment 10 (MISSE-10). This experiment aims to verify the EDS can withstand the harsh environment of space and will look to closely replicate the solar environment experienced on the moon. A second flight opportunity exists to provide an EDS to several companies as part of NASA's Lunar CATALYST program. The current mission concept would fly the EDS on the footpad of one of the Lunar CATALYST vehicles. Dust will likely deposit on the footpad through normal surface rover activities, but also upon landing where lunar dust is expected to be uplifted. To analyze the e effectiveness of the EDS system, photographs of the footpad with one of the spacecrafts onboard cameras are anticipated. If successful in these test flights, the EDS technology will be ready to be used in the protection of actual mission equipment for future NASA and commercial missions to the moon, asteroids, and Mars.

An adaptive case management system to support integrated care services: Lessons learned from the NEXES project.

PubMed

Cano, Isaac; Alonso, Albert; Hernandez, Carme; Burgos, Felip; Barberan-Garcia, Anael; Roldan, Jim; Roca, Josep

2015-06-01

Extensive deployment and sustainability of integrated care services (ICS) constitute an unmet need to reduce the burden of chronic conditions. The European Union project NEXES (2008-2013) assessed the deployment of four ICS encompassing the spectrum of severity of chronic patients. The current study aims to (i) describe the open source Adaptive Case Management (ACM) system (Linkcare®) developed to support the deployment of ICS at the level of healthcare district; (ii) to evaluate its performance; and, (iii) to identify key challenges for regional deployment of ICS. We first defined a conceptual model for ICS management and execution composed of five main stages. We then specified an associated logical model considering the dynamic runtime of ACM. Finally, we implemented the four ICS as a physical model with an ICS editor to allow professionals (case managers) to play active roles in adapting the system to their needs. Instances of ICS were then run in Linkcare®. Four ICS provided a framework for evaluating the system: Wellness and Rehabilitation (W&R) (number of patients enrolled in the study (n)=173); Enhanced Care (EC) in frail chronic patients to prevent hospital admissions, (n=848); Home Hospitalization and Early Discharge (HH/ED) (n=2314); and, Support to remote diagnosis (Support) (n=7793). The method for assessment of telemedicine applications (MAST) was used for iterative evaluation. Linkcare® supports ACM with shared-care plans across healthcare tiers and offers integration with provider-specific electronic health records. Linkcare® successfully contributed to the deployment of the four ICS: W&R facilitated long-term sustainability of training effects (p<0.01) and active life style (p<0.03); EC showed significant positive outcomes (p<0.05); HH/ED reduced on average 5 in-hospital days per patient with a 30-d re-admission rate of 10%; and, Support, enhanced community-based quality forced spirometry testing (p<0.01). Key challenges for regional deployment of personalized care were identified. Linkcare® provided the required functionalities to support integrated care adopting an ACM model, and it showed adaptive potential for its implementation in different health scenarios. The research generated strategies that contributed to face the challenges of the transition toward personalized medicine for chronic patients. Copyright © 2015 Elsevier Inc. All rights reserved.

Challenges of Implementing New Technologies for Sustainable Energy. Opening address at the Sixth Grove Fuel Cell Symposium, London, 13-16 September 1999

NASA Astrophysics Data System (ADS)

Jørgen Koch, Hans

To meet the commitments made in Kyoto, energy-related CO 2 emissions would have to fall to almost 30% below the level projected for a "Business-As-Usual" scenario. Meeting this goal will require a large-scale shift toward climate-friendly technologies such as fuel cells, which have a large long-term potential for both stationary generation and transportation. The deployment of a technology is the last major stage in the process of technological shift. Climate-friendly technologies are not being deployed at a sufficient rate or in sufficient amount to allow IEA countries to meet their targets. Hence, if technology is to play an important roll in reducing emissions within the Kyoto time frame (2008-2012) and beyond, immediate and sustained action to accelerate technology deployment will be required. Obstacles in the way of the deployment of technologies that are ready or near-ready for normal use have come to be referred to as market barriers. The simplest yet most significant form of market barrier to a new technology is the out-of-pocket cost to the user relative to the cost of technologies currently in use. Some market barriers also involve market failure, where the market fails to take account of all the costs and benefits involved, such as omitting external environmental costs, and therefore retard the deployment of more environmentally sustainable technologies. Other barriers include poor information dissemination, excessive and costly regulations, slow capital turnover rates, and inadequate financing. Efforts by governments to alleviate market barriers play an important role to complement private-sector activities, and there are many policies and measures each government could take. In addition, international technology collaboration can help promote the best use of available R&D resources and can contribute to more effective deployment of the result of research and development by sharing costs, pooling information and avoiding duplication of efforts.

A Case-Based Exploration of Task/Technology Fit in a Knowledge Management Context

DTIC Science & Technology

2008-03-01

have a difficult time articulating to others. Researchers who subscribe to the constructionist perspective view knowledge as an inherently social ...Acceptance Model With Task-Technology Fit Constructs. Information & Management, 36, 9-21. Dooley, D. (2001). Social Research Methods (4th ed.). Upper...L. (2006). Social Research Methods : Qualitative and Quantitative Approaches (6 ed.). Boston: Pearson Education, Inc. Nonaka, I. (1994). A Dynamic

Connected Vehicle Pilot Deployment Program phase I : comprehensive Pilot Deployment Plan : Tampa Hillsborough Expressway Authority (THEA) : final report.

DOT National Transportation Integrated Search

2016-07-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program is part of a national effort to advance CV technologies by deploying, demonstrating, testing and offering lessons learned for future deployers. The THE...

Fuel Reforming Technologies (BRIEFING SLIDES)

DTIC Science & Technology

2009-09-01

Heat and Mass Transfer , Catalysis...Gallons Of Fuel/Day/1100men Deployment  To Reduce Noise/Thermal Signature And 4 Environmental Emissions Advanced Heat and Mass Transfer 5 Advanced... Heat and Mass & Transfer Technologies Objective Identify And Develop New Technologies To Enhance Heat And Mass Transfer In Deployed Energy

75 FR 6087 - A Comprehensive Federal Strategy on Carbon Capture and Storage

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

... the Office of Science and Technology Policy[, and] the Chair of the Council on Environmental Quality... pollution. Rapid commercial development and deployment of clean coal technologies, particularly carbon... development of safe, affordable, and broadly deployable CCS technologies. We have made the largest Government...

Teaching systems thinking to 4th and 5th graders using Environmental Dashboard display technology.

PubMed

Clark, Shane; Petersen, John E; Frantz, Cindy M; Roose, Deborah; Ginn, Joel; Rosenberg Daneri, Daniel

2017-01-01

Tackling complex environmental challenges requires the capacity to understand how relationships and interactions between parts result in dynamic behavior of whole systems. There has been convincing research that these "systems thinking" skills can be learned. However, there is little research on methods for teaching these skills to children or assessing their impact. The Environmental Dashboard is a technology that uses "sociotechnical" feedback-information feedback designed to affect thought and behavior. Environmental Dashboard (ED) combines real-time information on community resource use with images and words that reflect pro-environmental actions of community members. Prior research indicates that ED supports the development of systems thinking in adults. To assess its impact on children, the technology was installed in a primary school and children were passively exposed to ED displays. This resulted in no measurable impact on systems thinking skills. The next stage of this research examined the impact of actively integrating ED into lessons on electricity in 4th and 5th grade. This active integration enhanced both content-related systems thinking skills and content retention.

Teaching systems thinking to 4th and 5th graders using Environmental Dashboard display technology

PubMed Central

Clark, Shane; Frantz, Cindy M.; Roose, Deborah; Ginn, Joel; Rosenberg Daneri, Daniel

2017-01-01

Tackling complex environmental challenges requires the capacity to understand how relationships and interactions between parts result in dynamic behavior of whole systems. There has been convincing research that these “systems thinking” skills can be learned. However, there is little research on methods for teaching these skills to children or assessing their impact. The Environmental Dashboard is a technology that uses “sociotechnical” feedback–information feedback designed to affect thought and behavior. Environmental Dashboard (ED) combines real-time information on community resource use with images and words that reflect pro-environmental actions of community members. Prior research indicates that ED supports the development of systems thinking in adults. To assess its impact on children, the technology was installed in a primary school and children were passively exposed to ED displays. This resulted in no measurable impact on systems thinking skills. The next stage of this research examined the impact of actively integrating ED into lessons on electricity in 4th and 5th grade. This active integration enhanced both content-related systems thinking skills and content retention. PMID:28448586

Stakeholder Perspectives. Proceedings of the Ed-ICT International Network Symposium (Dawson College Montreal, Quebec, Canada, May 30-Jun 1, 2017)

ERIC Educational Resources Information Center

Jorgensen, Mary; Fichten, Catherine; King, Laura; Havel, Alice

2018-01-01

The purpose of these conference proceedings is to provide an in-depth understanding of what was presented and discussed at the Ed-ICT International Network Montreal Symposium: Stakeholder Perspectives. The focus of the Ed-ICT International Network is to explore the role that information and communication technologies (ICTs)--including computers,…

U.S. Department of Education, Office of Inspector General Semiannual Report to Congress, October 1, 1998-March 31, 1999.

ERIC Educational Resources Information Center

Office of Inspector General (ED), Washington, DC.

This report from the Department of Education's (ED) Office of Inspector General (OIG) focuses on ED's information technology and Year 2000 readiness. It also reviews elementary and secondary education and student financial-assistance programs to ensure that ED programs are administered with efficiency, effectiveness, and integrity. A review of…

Final Technical Report: Commercial Advanced Lighting Control (ALC) Demonstration and Deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, Gabe

This three-year demonstration and deployment project sought to address market barriers to accelerating the adoption of Advanced Lighting Controls (ALCs), an underutilized technology with low market penetration. ALCs are defined as networked, addressable lighting control systems that utilize software or intelligent controllers to combine multiple energy-saving lighting control strategies in a single space (e.g., smart-time scheduling, daylight harvesting, task tuning, occupancy control, personal control, variable load-shedding, and plug-load control). The networked intelligent aspect of these systems allows applicable lighting control strategies to be combined in a single space, layered over one another, maximizing overall energy-savings. The project included five realmore » building demonstrations of ALCs across the Northeast US region. The demonstrations provided valuable data and experience to support deployment tasks that are necessary to overcome market barriers. These deployment tasks included development of training resources for building designers, installers, and trades, as well as development of new energy efficiency rebates for the technology from Efficiency Forward’s utility partners. Educating designers, installers, and trades on ALCs is a critical task for reducing the cost of the technology that is currently inflated due to perceived complexity and unfamiliarity with how to design and install the systems. Further, utility and non-utility energy efficiency programs continue to relegate the technology to custom or ill-suited prescriptive program designs that do not effectively deploy the technology at scale. This project developed new, scalable rebate approaches for the technology. Efficiency Forward utilized their DesignLights Consortium® (DLC) brand and network of 81 DLC member utilities to develop and deploy the results of the project. The outputs of the project have included five published case studies, a six-hour ALC technology training curriculum that has already been deployed in five US states, and new rebates offered for the technology that have been deployed by a dozen utilities across the US. Widespread adoption of ALC technology in commercial buildings would provide tremendous benefits. The current market penetration of ALC systems is estimated at <0.1% in commercial buildings. If ALC systems were installed in all commercial buildings, approximately 1,051 TBtu of energy could be saved. This would translate into customer cost savings of approximately $10.7 billion annually.« less

Envisioning a Low-Cost Solar Future: Exploring the Potential Impact of Achieving the SunShot 2030 Targets for Photovoltaics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley J; Frew, Bethany A; Gagnon, Pieter J

In the context of recent dramatic solar energy cost reductions, the U.S. Department of Energy set new levelized cost of energy goals for photovoltaics (PV) to achieve by 2030 to enable significantly greater PV adoption: $0.03/kWh for utility-scale, $0.04/kWh for commercial, and $0.05/kWh for residential PV systems. We analyze the potential impacts of achieving these 'SunShot 2030' cost targets for the contiguous United States using the Regional Energy Deployment System (ReEDS) and Distributed Generation (dGen) capacity expansion models. We consider the impacts under a wide range of future conditions. We find that PV could provide 13%-18% of U.S. electricity demandmore » in 2030 and 28%-64% of demand if the SunShot 2030 goals are achieved, with PV deployment increasing in every state. The availability of low-cost storage has the largest impact on projected deployment, followed by natural gas prices and electricity demand. For comparison, PV deployed under a business-as-usual scenario could provide only 5% of generation in 2030 and 17% in 2050. We find that the high levels of PV deployment explored here lead to lower electricity prices and system costs, lower carbon dioxide emissions, lower water consumption, increased renewable energy curtailment, and increased storage deployment compared with the business-as-usual scenario.« less

Technology Area Roadmap for In-Space Propulsion Technologies

NASA Technical Reports Server (NTRS)

Johnson, Les; Meyer, Michael; Palaszewski, Bryan; Coote, David; Goebel, Dan; White, Harold

2012-01-01

The exponential increase of launch system size.and cost.with delta-V makes missions that require large total impulse cost prohibitive. Led by NASA fs Marshall Space Flight Center, a team from government, industry, and academia has developed a flight demonstration mission concept of an integrated electrodynamic (ED) tethered satellite system called PROPEL: \\Propulsion using Electrodynamics.. The PROPEL Mission is focused on demonstrating a versatile configuration of an ED tether to overcome the limitations of the rocket equation, enable new classes of missions currently unaffordable or infeasible, and significantly advance the Technology Readiness Level (TRL) to an operational level. We are also focused on establishing a far deeper understanding of critical processes and technologies to be able to scale and improve tether systems in the future. Here, we provide an overview of the proposed PROPEL mission. One of the critical processes for efficient ED tether operation is the ability to inject current to and collect current from the ionosphere. Because the PROPEL mission is planned to have both boost and deboost capability using a single tether, the tether current must be capable of flowing in both directions and at levels well over 1 A. Given the greater mobility of electrons over that of ions, this generally requires that both ends of the ED tether system can both collect and emit electrons. For example, hollow cathode plasma contactors (HCPCs) generally are viewed as state-of-the-art and high TRL devices; however, for ED tether applications important questions remain of how efficiently they can operate as both electron collectors and emitters. Other technologies will be highlighted that are being investigated as possible alternatives to the HCPC such as Solex that generates a plasma cloud from a solid material (Teflon) and electron emission (only) technologies such as cold-cathode electron field emission or photo-electron beam generation (PEBG) techniques

Supporting Persistent and Networked Special Operations Forces (SOF) Operations: Insights From Forward-Deployed SOF Personnel

DTIC Science & Technology

2017-01-01

network of people and technology to provide sustained, persistent, SOF-specific capabilities and capacities and increased persistent forward- deployed...phase 1 operational activities of forward-deployed SOF personnel and the factors that critically influence the outcomes of their tactical operations can...chronized network of people and technology that provides sustained, persistent, SOF- specific capabilities and capacities and increased persistent

GeoVision Exploration Task Force Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doughty, Christine; Dobson, Patrick F.; Wall, Anna

The GeoVision study effort included ground-breaking, detailed research on current and future market conditions and geothermal technologies in order to forecast and quantify the electric and non-electric deployment potentials under a range of scenarios, in addition to their impacts on the Nation’s jobs, economy and environment. Coordinated by the U.S. Department of Energy’s (DOE’s) Geothermal Technologies Office (GTO), the GeoVision study development relied on the collection, modeling, and analysis of robust datasets through seven national laboratory partners, which were organized into eight technical Task Force groups. The purpose of this report is to provide a central repository for the researchmore » conducted by the Exploration Task Force. The Exploration Task Force consists of four individuals representing three national laboratories: Patrick Dobson (task lead) and Christine Doughty of Lawrence Berkeley National Laboratory, Anna Wall of National Renewable Energy Laboratory, Travis McLing of Idaho National Laboratory, and Chester Weiss of Sandia National Laboratories. As part of the GeoVision analysis, our team conducted extensive scientific and financial analyses on a number of topics related to current and future geothermal exploration methods. The GeoVision Exploration Task Force complements the drilling and resource technology investigations conducted as part of the Reservoir Maintenance and Development Task Force. The Exploration Task Force however has focused primarily on early stage R&D technologies in exploration and confirmation drilling, along with an evaluation of geothermal financing challenges and assumptions, and innovative “blue-sky” technologies. This research was used to develop geothermal resource supply curves (through the use of GETEM) for use in the ReEDS capacity expansion modeling that determines geothermal technology deployment potential. It also catalogues and explores the large array of early-stage R&D technologies with the potential to dramatically reduce exploration and geothermal development costs, forming the basis of the GeoVision Technology Improvement (TI) scenario. These modeling topics are covered in detail in Potential to Penetration task force report. Most of the research contained herein has been published in peer-reviewed papers or conference proceedings and are cited and referenced accordingly. The sections that follow provide a central repository for all of the research findings of the Exploration and Confirmation Task Force. In summary, it provides a comprehensive discussion of Engineered Geothermal Systems (EGS) and associated technology challenges, the risks and costs of conducting geothermal exploration, a review of existing government efforts to date in advancing early-stage R&D in both exploration and EGS technologies, as well as a discussion of promising and innovative technologies and implementation of blue-sky concepts that could significantly reduce costs, lower risks, and shorten the time needed to explore and develop geothermal resources of all types.« less

78 FR 65747 - Notice of Funding Availability for Accelerated Innovation Deployment Demonstration

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Funding Availability for Accelerated Innovation Deployment Demonstration AGENCY: Federal Highway... comments. SUMMARY: This notice announces the availability of funding for Accelerated Innovation Deployment (AID) Demonstration authorized within the Technology and Innovation Deployment Program (TIDP) under the...

Satellite Sensornet Gateway Technology Infusion Through Rapid Deployments for Environmental Sensing

NASA Astrophysics Data System (ADS)

Benzel, T.; Silva, F.; Deschon, A.; Ye, W.; Cho, Y.

2008-12-01

The Satellite Sensornet Gateway (SSG) is an ongoing ESTO Advanced Information Systems Technology project, at the University of Southern California. The major goal of SSG is to develop a turnkey solution for building environmental observation systems based on sensor networks. Our system has been developed through an iterative series of deployment-driven design, build, test, and revise which maximizes technology infusion to the earth scientist. We have designed a robust and flexible sensor network called Sensor Processing and Acquisition Network (SPAN). Our SPAN architecture emphasizes a modular and extensible design, such that core building blocks can be reused to develop different scientific observation systems. To support rapid deployment at remote locations, we employ satellite communications as the backhaul to relay in-situ sensor data to a central database. To easily support various science applications, we have developed a unified sensor integration framework that allows streamlined integration of different sensors to the system. Our system supports heterogeneous sets of sensors, from industry-grade products to research- specific prototypes. To ensure robust operation in harsh environments, we have developed mechanisms to monitor system status and recover from potential failures along with additional remote configuration and QA/QC functions. Here we briefly describe the deployments, the key science missions of the deployments and the role that the SSG technology played in each mission. We first deployed our SSG technology at the James Reserve in February 2007. In a joint deployment with the NEON project, SDSC, and UC Riverside, we set up a meteorological station, using a diverse set of sensors, with the objective of validating our basic technology components in the field. This system is still operational and streaming live sensor data. At Stunt Ranch, a UC Reserve near Malibu, CA, we partnered with UCLA biologist Phillip Rundel in order to study the drought impact on deep and shallow rooted plants. Our system was deployed in December 2007 and monitors sap flow on various plant species, while using a satellite link for real-time data access. In April 2008, in a joint deployment with UCLA, UC Merced, and GLEON, our SSG technology was used to study the impact of agricultural run off in a series of salt lakes near Bahia Blanca, Argentina. Our system collected meteorological data that were combined with water quality measurements taken from boats and buoys. Our SSG technology was used at the PASI workshop in June 2008 at the La Selva Biological Research Station in Costa Rica. As part of a two-week curriculum, students from throughout the americas used our system to collect measurements in the rain forest and later analyzed the data. La Selva plans to install several SSG nodes throughout the reserve and make mobile nodes available for visiting researchers to use in their research. We are currently planning a deployment with environmental engineer Tom Harmon from UC Merced to build an autonomous water quality flow path and reactive transport observation system near Merced, CA. SSG technology will be deployed to monitor soil, groundwater, and surface water parameters. In China's Guizhou Province, we are collaborating with researcher Sarah Rothenberg, who is studying mercury cycling in rice paddies. Our SSG system will collect soil parameters such as pH and ORP, in addition to environmental measurements such as PAR, and UV. This presentation will describe the SSG project, the SPAN prototype and our experience with technology infusion from the deployments. class="ab'>

47 CFR 51.231 - Provision of information on advanced services deployment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... rejection; and (3) Information with respect to the number of loops using advanced services technology within... incumbent LEC information on the type of technology that the requesting carrier seeks to deploy. (1) Where... spectral density (PSD) mask, it also must provide Spectrum Class information for the technology. (2) Where...

47 CFR 51.231 - Provision of information on advanced services deployment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the requesting carrier asserts that the technology it seeks to deploy fits within a generic power... technology, it must provide the incumbent LEC with information on the speed and power at which the signal... rejection; and (3) Information with respect to the number of loops using advanced services technology within...

49 CFR 268.5 - Federal funding sources for the Maglev Deployment Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Federal funding sources for the Maglev Deployment... TECHNOLOGY DEPLOYMENT PROGRAM Overview § 268.5 Federal funding sources for the Maglev Deployment Program. (a) Federal Maglev Funds. Section 322 of Title 23 provides for the following funds for the Maglev Deployment...

49 CFR 268.5 - Federal funding sources for the Maglev Deployment Program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Federal funding sources for the Maglev Deployment... TECHNOLOGY DEPLOYMENT PROGRAM Overview § 268.5 Federal funding sources for the Maglev Deployment Program. (a) Federal Maglev Funds. Section 322 of Title 23 provides for the following funds for the Maglev Deployment...

49 CFR 268.5 - Federal funding sources for the Maglev Deployment Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Federal funding sources for the Maglev Deployment... TECHNOLOGY DEPLOYMENT PROGRAM Overview § 268.5 Federal funding sources for the Maglev Deployment Program. (a) Federal Maglev Funds. Section 322 of Title 23 provides for the following funds for the Maglev Deployment...

49 CFR 268.5 - Federal funding sources for the Maglev Deployment Program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Federal funding sources for the Maglev Deployment... TECHNOLOGY DEPLOYMENT PROGRAM Overview § 268.5 Federal funding sources for the Maglev Deployment Program. (a) Federal Maglev Funds. Section 322 of Title 23 provides for the following funds for the Maglev Deployment...

The Value of Wind Technology Innovation: Implications for the U.S. Power System, Wind Industry, Electricity Consumers, and Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mai, Trieu T; Lantz, Eric J; Mowers, Matthew

Improvements to wind technologies have, in part, led to substantial deployment of U.S. wind power in recent years. The degree to which technology innovation will continue is highly uncertain adding to uncertainties in future wind deployment. We apply electric sector modeling to estimate the potential wind deployment opportunities across a range of technology advancement projections. The suite of projections considered span a wide range of possible cost and technology innovation trajectories, including those from a recent expert elicitation of wind energy experts, a projection based on the broader literature, and one reflecting estimates based on a U.S. DOE research initiative.more » In addition, we explore how these deployment pathways may impact the electricity system, electricity consumers, the environment, and the wind-related workforce. Overall, our analysis finds that wind technology innovation can have consequential implications for future wind power development throughout the United States, impact the broader electricity system, lower electric system and consumer costs, provide potential environmental benefits, and grow the U.S. wind workforce.« less

Technology based transportation solutions : model deployment initiative

DOT National Transportation Integrated Search

1997-08-01

The Model Deployment Initiative provides real-life examples of technologys potential in metropolitan areas across the country. Investments from public and private sector partners will integrate existing ITS elements in the four sites as part of a ...

Large deployable antenna program. Phase 1: Technology assessment and mission architecture

NASA Technical Reports Server (NTRS)

Rogers, Craig A.; Stutzman, Warren L.

1991-01-01

The program was initiated to investigate the availability of critical large deployable antenna technologies which would enable microwave remote sensing missions from geostationary orbits as required for Mission to Planet Earth. Program goals for the large antenna were: 40-meter diameter, offset-fed paraboloid, and surface precision of 0.1 mm rms. Phase 1 goals were: to review the state-of-the-art for large, precise, wide-scanning radiometers up to 60 GHz; to assess critical technologies necessary for selected concepts; to develop mission architecture for these concepts; and to evaluate generic technologies to support the large deployable reflectors necessary for these missions. Selected results of the study show that deployable reflectors using furlable segments are limited by surface precision goals to 12 meters in diameter, current launch vehicles can place in geostationary only a 20-meter class antenna, and conceptual designs using stiff reflectors are possible with areal densities of 2.4 deg/sq m.

Large Deployable Reflector Science and Technology Workshop. Volume 3: Systems and Technology Assessment

NASA Technical Reports Server (NTRS)

Leidich, C. A. (Editor); Pittman, R. B. (Editor)

1984-01-01

The results of five technology panels which convened to discuss the Large Deployable Reflector (LDR) are presented. The proposed LDR is a large, ambient-temperature, far infrared/submillimeter telescope designed for space. Panel topics included optics, materials and structures, sensing and control, science instruments, and systems and missions. The telescope requirements, the estimated technology levels, and the areas in which the generic technology work has to be augmented are enumerated.

COmmunications and Networking with QUantum Operationally-Secure Technology for Maritime Deployment (CONQUEST)

DTIC Science & Technology

2017-03-06

Raytheon BBN Technologies ; Dr. Saikat Guha Contractor Address: 10 Moulton Street, Cambridge, MA 02138 Title of the Project : COmmunications and...BBN Technologies 10 Moulton Street Cambridge, MA 02138 6 March 2017 US Navy Office of Naval Research One Liberty Center 875 North Randolph...Networking with QUantum operationally-Secure Technology for Maritime Deployment (CONQUEST) Contract Period of Performance: 2 September 2016 – 1

76 FR 34286 - ITS Joint Program Office; Webinar on Connected Vehicle Infrastructure Deployment Analysis Report...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-13

... Deployment Analysis Report Review; Notice of Public Meeting AGENCY: Research and Innovative Technology... discuss the Connected Vehicle Infrastructure Deployment Analysis Report. The webinar will provide an... and Transportation Officials (AASHTO) Connected Vehicle Infrastructure Deployment Analysis Report...

High-performance, flexible, deployable array development for space applications

NASA Technical Reports Server (NTRS)

Gehling, Russell N.; Armstrong, Joseph H.; Misra, Mohan S.

1994-01-01

Flexible, deployable arrays are an attractive alternative to conventional solar arrays for near-term and future space power applications, particularly due to their potential for high specific power and low storage volume. Combined with low-cost flexible thin-film photovoltaics, these arrays have the potential to become an enabling or an enhancing technology for many missions. In order to expedite the acceptance of thin-film photovoltaics for space applications, however, parallel development of flexible photovoltaics and the corresponding deployable structure is essential. Many innovative technologies must be incorporated in these arrays to ensure a significant performance increase over conventional technologies. For example, innovative mechanisms which employ shape memory alloys for storage latches, deployment mechanisms, and array positioning gimbals can be incorporated into flexible array design with significant improvement in the areas of cost, weight, and reliability. This paper discusses recent activities at Martin Marietta regarding the development of flexible, deployable solar array technology. Particular emphasis is placed on the novel use of shape memory alloys for lightweight deployment elements to improve the overall specific power of the array. Array performance projections with flexible thin-film copper-indium-diselenide (CIS) are presented, and government-sponsored solar array programs recently initiated at Martin Marietta through NASA and Air Force Phillips Laboratory are discussed.

Strategic deployment plan : intelligent transportation system (ITS) : early deployment study, Kansas City metropolitan bi-state area

DOT National Transportation Integrated Search

1997-01-01

Intelligent transportation systems (ITS) are systems that utilize advanced technologies, including computer, communications and process control technologies, to improve the efficiency and safety of the transportation system. These systems encompass a...

An analysis of the factors influencing ITS technology adoption and deployment.

DOT National Transportation Integrated Search

2011-11-11

This study analyzes the factors influencing the adoption of Intelligent Transportation Systems (ITS) technologies in the U.S. amongst state and local transportation agencies. Using data from the ITS Deployment Tracking survey, insight is provided on ...

Working at the intersection of context, culture, and technology: Provider perspectives on antimicrobial stewardship in the emergency department using electronic health record clinical decision support.

PubMed

Chung, Phillip; Scandlyn, Jean; Dayan, Peter S; Mistry, Rakesh D

2017-11-01

Antibiotic stewardship programs (ASPs) have not been fully developed for the emergency department (ED), in part the result of the barriers characteristic of this setting. Electronic health record-based clinical decision support (EHR CDS) represents a promising strategy to implement ASPs in the ED. We aimed to determine the cultural beliefs and structural barriers and facilitators to implementation of antimicrobial stewardship in the pediatric ED using EHR CDS. Interviews and focus groups were conducted with hospital and ED leadership, attending ED physicians, nurse practitioners, physician assistants, and residents at a single health system in Colorado. We reviewed and coded the data using constant comparative analysis and framework analysis until a final set of themes emerged. Two dominant perceptions shaped providers' perspectives on ASPs in the ED and EHR CDS: (1) maintaining workflow efficiency and (2) constrained decision-making autonomy. Clinicians identified structural barriers to ASPs, such as pace of the ED, and various beliefs that shaped patterns of practice, including accommodating the prescribing decisions of other providers and managing parental expectations. Recommendations to enhance uptake focused on designing a simple yet flexible user interface, providing clinicians with performance data, and on-boarding clinicians to enhance buy-in. Developing a successful ED-based ASP using EHR CDS should attend to technologic needs, the institutional context, and the cultural beliefs of practice associated with providers' antibiotic prescribing. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

TechEdSat Nano-Satellite Series Fact Sheet

NASA Technical Reports Server (NTRS)

Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

2014-01-01

TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

Review of deployment technology for tethered satellite systems

NASA Astrophysics Data System (ADS)

Yu, B. S.; Wen, H.; Jin, D. P.

2018-03-01

Tethered satellite systems (TSSs) have attracted significant attention due to their potential and valuable applications for scientific research. With the development of various launched on-orbit missions, the deployment of tethers is considered a crucial technology for operation of a TSS. Both past orbiting experiments and numerical results have shown that oscillations of the deployed tether due to the Coriolis force and environmental perturbations are inevitable and that the impact between the space tether and end-body at the end of the deployment process leads to complicated nonlinear phenomena. Hence, a set of suitable control methods plays a fundamental role in tether deployment. This review article summarizes previous work on aspects of the dynamics, control, and ground-based experiments of tether deployment. The relevant basic principles, analytical expressions, simulation cases, and experimental results are presented as well.

Emergency department characteristics and capabilities in Beijing, China.

PubMed

Wen, Leana S; Xu, Jun; Steptoe, Anne P; Sullivan, Ashley F; Walline, Joseph H; Yu, Xuezhong; Camargo, Carlos A

2013-06-01

Emergency Departments (EDs) are a critical, yet heterogeneous, part of international emergency care. We sought to describe the characteristics, resources, capabilities, and capacity of EDs in Beijing, China. Beijing EDs accessible to the general public 24 h per day/7 days per week were surveyed using the National ED Inventories survey instrument (www.emnet-nedi.org). ED staff were asked about ED characteristics during the calendar year 2008. Thirty-six EDs participated (88% response rate). All were located in hospitals and were independent hospital departments. Participating EDs saw a median of 80,000 patients (interquartile range 40,000-118,508). The vast majority (91%; 95% confidence interval [CI] 78-98%) had a contiguous layout, with medical and surgical care provided in one area. Most EDs (55%) saw only adults; 39% saw both adults and children, and 6% saw only children. Availability of technological and consultant resource in EDs was high. The typical ED length of stay was between 1 and 6 h in 49% of EDs (95% CI 32-67%), whereas in the other half, patients reportedly remained for over 6 h; 36% (95% CI 21-54%) of respondents considered their ED over capacity. Beijing EDs have high volume, long length of stay, and frequent reports of EDs being over capacity. To meet its rapidly growing health needs in urban areas, China should consider improving urban ED capacity and training more Emergency Medicine specialists capable of efficiently staffing its crowded EDs. Copyright © 2013 Elsevier Inc. All rights reserved.

Journal of Special Operations Medicine, Volume 6, Edition 4

DTIC Science & Technology

2006-01-01

units and our active editorial consultants. 2) SOMA members receive the JSOM as part of membership. Please note, if you are a SOMA member and are...directed by the Commander. As of September, the SOF Warrior, Program Executive Office (PEO) has an active and forward moving TC3 program that will...AFSOC medics have been actively deployed around the world. The 352nd Special Operations Group (SOG) medics support- ed a humanitarian non-combatant

Reforming Military Command Arrangements: The Case of the Rapid Deployment Joint Task Force

DTIC Science & Technology

2011-03-01

protected. Organizational theory has identified actions that organizations normally pursue or avoid in order to increase—or at least preserve—their...thesis. See note 1 for details. 85 179. Jeffrey W. Taliaferro, Steven E. Lobell, and Norrin M. Ripsman, “Introduction: Neoclassical Realism, the State...and For- eign Policy,” in Steven E. Lobell, Norrin M. Ripsman and Jeffrey W. Taliaferro, eds., Neoclassical Realism, the State, and Foreign Poli- cy

Prototype Space Fabrication Platform

DTIC Science & Technology

1993-12-01

Wheel Mechanism . . 5-12 5.3.4 Butt Welding of T-Beams ..... .......... 5-14 5.3.5 Application of Cross Members ............ 5-17 5.3.6 Application of...fabrication process and deployed into spece by a drive mechanism on each cap member. The drive mechanism also provided the force necessary to extract...members were stacked closely together and stored in a clip mechanism . The clip had a belt ’ ed mechanism designed to advance the stack, one member at

Are we there yet? A Practitioner's View of DO-178C/ED-12C

NASA Astrophysics Data System (ADS)

Daniels, Dewi

RTCA DO-178B/EUROCAE ED-12B is the industry-accepted guidance for determining that the software aspects of airborne systems and equipment comply with airworthiness requirements. DO-178B/ED-12B, published in 1992, is being updated to DO-178C/ED-12C. Nearly six years in the making, DO- 178C/ED-12C is expected to be completed in December 2010. It will be accompanied by a new set of supplements providing additional and much-needed guidance on tool qualification, model based development and verification, objectoriented technologies, and formal methods. Written by a member of the DO-178C/ED-12C editorial team who is also a practising software developer and verifier, this paper provides a practitioner's view of the new standard and its supplements. It explains how they will affect your organisation, focusing on the practical implications of the many changes between DO-178B/ED-12B and DO-178C/ED-12C.

Research, Development, Demonstration and Deployment Issues in the Power Sector

EPA Science Inventory

For Frank Princiotta’s book, Global Climate Change—The Technology Challenge In this chapter we explore the challenges in developing and deploying technology for mitigation of CO2 emissions associated with power generation. Past successes with controlling other pollutants (notab...

The Innovative Technology Deployment (ITD)/ Commercial Vehicle Information Systems and Networks (CVISN) Program, 2016 annual report.

DOT National Transportation Integrated Search

2017-06-01

On December 4, 2015, the Fixing Americas Surface Transportation Act, 2015 (FAST Act) (Pub. L. 114-94) established the Innovative Technology Deployment (ITD) Grant Program, replacing the long-standing Commercial Vehicle Information Systems and Netw...

Sell, Sell, Sell or Learn, Learn, Learn? The EdTech Market in New Zealand's Education System--Privatisation by Stealth?

ERIC Educational Resources Information Center

Wright, Noeline; Peters, Michael

2017-01-01

An article in "The Atlantic" "Quantifying the Ed-Tech Market" (2015), which draws on a review by the Education Technology Industry Network, reports that the U.S. Ed-tech market totalled $8.38 billion in the 2012-2013 academic year, which is up from $7.9 billion the year before, and up 11.7 per cent from 2009. K-12 online course…

Controlled Vocabulary Service Application for Environmental Data Store

NASA Astrophysics Data System (ADS)

Ji, P.; Piasecki, M.; Lovell, R.

2013-12-01

In this paper we present a controlled vocabulary service application for Environmental Data Store (EDS). The purpose for such application is to help researchers and investigators to archive, manage, share, search, and retrieve data efficiently in EDS. The Simple Knowledge Organization System (SKOS) is used in the application for the representation of the controlled vocabularies coming from EDS. The controlled vocabularies of EDS are created by collecting, comparing, choosing and merging controlled vocabularies, taxonomies and ontologies widely used and recognized in geoscience/environmental informatics community, such as Environment ontology (EnvO), Semantic Web for Earth and Environmental Terminology (SWEET) ontology, CUAHSI Hydrologic Ontology and ODM Controlled Vocabulary, National Environmental Methods Index (NEMI), National Water Information System (NWIS) codes, EPSG Geodetic Parameter Data Set, WQX domain value etc. TemaTres, an open-source, web -based thesaurus management package is employed and extended to create and manage controlled vocabularies of EDS in the application. TemaTresView and VisualVocabulary that work well with TemaTres, are also integrated in the application to provide tree view and graphical view of the structure of vocabularies. The Open Source Edition of Virtuoso Universal Server is set up to provide a Web interface to make SPARQL queries against controlled vocabularies hosted on the Environmental Data Store. The replicas of some of the key vocabularies commonly used in the community, are also maintained as part of the application, such as General Multilingual Environmental Thesaurus (GEMET), NetCDF Climate and Forecast (CF) Standard Names, etc.. The application has now been deployed as an elementary and experimental prototype that provides management, search and download controlled vocabularies of EDS under SKOS framework.

Advanced GPS Technologies (AGT)

DTIC Science & Technology

2015-05-01

Distribution A GPS Ill Developmental Optical Clock Deployable Antenna Concept 3 \\.J Science and Technology for GPS •:• Spacecraft • AFRL has funded a...Digital Waveform Generators New antenna concepts Supporting electronics Algorithms and new signal combining methods Satellite bus technologies...GPS Military High Gain Antenna Developing Options for Ground Testing 1) Deployable phased array • Low profile element • High efficiency phase

Case Study: The Transformation of the Health Record; The Impact of Electronic Medical Records in a Military Treatment Facility

DTIC Science & Technology

2006-06-01

technology , communication , and incremental and manageable deployment plans. Hospital Leadership Support is Essential AHLTA is supported by the senior leaders...Information Technology The importance of information technology and the desire to utilize it for improved health care outcomes is part of the NMCSD... technology applications had a direct positive impact on AHLTA’s deployment at NMCSD. Communication As previously discussed in the leadership

Deploying advanced public transportation systems in Birmingham

DOT National Transportation Integrated Search

2003-08-01

Advanced Public Transportation Systems (APTS) technologies have been deployed by many urban transit systems in order to improve efficiency, reduce operating costs, and improve service quality. The majority of : these deployments, however, have been i...

Active Dust Mitigation Technology for Thermal Radiators for Lunar Exploration

NASA Technical Reports Server (NTRS)

Calle, C. I.; Buhler, C. R.; Hogue, M. D.; Johansen, M. R.; Hopkins, J. W.; Holloway, N. M. H.; Connell, J. W.; Chen, A.; Irwin, S. A.; Case, S. O.;

Laura Vimmerstedt | NREL

Science.gov Websites

implications for energy technologies Research Interests Environmental effects of energy technologies and . Warner, and Dana Stright. 2016. Effects of Deployment Investment on the Growth of the Biofuels Industry . W. Bush. 2013. Effects of Deployment Investment on the Growth of the Biofuels Industry. Golden, CO

Reactor technology assessment and selection utilizing systems engineering approach

NASA Astrophysics Data System (ADS)

Zolkaffly, Muhammed Zulfakar; Han, Ki-In

2014-02-01

The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

Large Deployable Reflector (LDR)

NASA Technical Reports Server (NTRS)

Alff, W. H.

1980-01-01

The feasibility and costs were determined for a 1 m to 30 m diameter ambient temperature, infrared to submillimeter orbiting astronomical telescope which is to be shuttle-deployed, free-flying, and have a 10 year orbital life. Baseline concepts, constraints on delivery and deployment, and the sunshield required are examined. Reflector concepts, the optical configuration, alignment and pointing, and materials are also discussed. Technology studies show that a 10 m to 30 m diameter system which is background and diffraction limited at 30 micron m is feasible within the stated time frame. A 10 m system is feasible with current mirror technology, while a 30 m system requires technology still in development.

Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

NASA Astrophysics Data System (ADS)

Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

1989-04-01

A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

NASA Technical Reports Server (NTRS)

Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

1989-01-01

A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

Wind deployment in the United States: states, resources, policy, and discourse.

PubMed

Wilson, Elizabeth J; Stephens, Jennie C

2009-12-15

A transformation in the way the United States produces and uses energy is needed to achieve greenhouse gas reduction targets for climate change mitigation. Wind power is an important low-carbon technology and the most rapidly growing renewable energy technology in the U.S. Despite recent advances in wind deployment, significant state-by-state variation in wind power distribution cannot be explained solely by wind resource patterns nor by state policy. Other factors embedded within the state-level socio-political context also contribute to wind deployment patterns. We explore this socio-political context in four U.S. states by integrating multiple research methods. Through comparative state-level analysis of the energy system, energy policy, and public discourse as represented in the media, we examine variation in the context for wind deployment in Massachusetts, Minnesota, Montana, and Texas. Our results demonstrate that these states have different patterns of wind deployment, are engaged in different debates about wind power, and appear to frame the risks and benefits of wind power in different ways. This comparative assessment highlights the complex variation of the state-level socio-political context and contributes depth to our understanding of energy technology deployment processes, decision-making, and outcomes.

High-Capacity Communications from Martian Distances Part 2: Spacecraft Antennas and Power Systems

NASA Technical Reports Server (NTRS)

Hodges, Richard E.; Kodis, Mary Anne; Epp, Larry W.; Orr, Richard; Schuchman, Leonard; Collins, Michael; Sands, O. Scott; Vyas, Hemali; Williams, W. Dan

2006-01-01

This paper summarizes recent advances in antenna and power systems technology to enable a high data rate Ka-band Mars-to-Earth telecommunications system. Promising antenna technologies are lightweight, deployable space qualified structures at least 12-m in diameter (potentially up to 25-m). These technologies include deployable mesh reflectors, inflatable reflectarray and folded thermosetting composite. Advances in 1kW-class RF power amplifiers include both TWTA and SSPA technologies.

COmmunications and Networking with QUantum operationally Secure Technology for Maritime Deployment (CONQUEST)

DTIC Science & Technology

2016-12-02

Quantum Computing , University of Waterloo, Waterloo ON, N2L 3G1, Canada (Dated: December 1, 2016) Continuous variable (CV) quantum key distribution (QKD...Networking with QUantum operationally-Secure Technology for Maritime Deployment (CONQUEST) Contract Period of Performance: 2 September 2016 – 1 September...this letter or have any other questions. Sincerely, Raytheon BBN Technologies Kathryn Carson Program Manager Quantum Information Processing

The accelerated site technology deployment program presents the segmented gate system

DOE Office of Scientific and Technical Information (OSTI.GOV)

PATTESON,RAYMOND; MAYNOR,DOUG; CALLAN,CONNIE

2000-02-24

The Department of Energy (DOE) is working to accelerate the acceptance and application of innovative technologies that improve the way the nation manages its environmental remediation problems. The DOE Office of Science and Technology established the Accelerated Site Technology Deployment Program (ASTD) to help accelerate the acceptance and implementation of new and innovative soil and ground water remediation technologies. Coordinated by the Department of Energy's Idaho Office, the ASTD Program reduces many of the classic barriers to the deployment of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. The papermore » uses the example of the Segmented Gate System (SGS) to illustrate how the ASTD program works. The SGS was used to cost effectively separate clean and contaminated soil for four different radionuclides: plutonium, uranium, thorium, and cesium. Based on those results, it has been proposed to use the SGS at seven other DOE sites across the country.« less

Challenges to effective crisis management: using information and communication technologies to coordinate emergency medical services and emergency department teams.

PubMed

Reddy, Madhu C; Paul, Sharoda A; Abraham, Joanna; McNeese, Michael; DeFlitch, Christopher; Yen, John

2009-04-01

The purpose of this study is to identify the major challenges to coordination between emergency department (ED) teams and emergency medical services (EMS) teams. We conducted a series of focus groups involving both ED and EMS team members using a crisis scenario as the basis of the focus group discussion. We also collected organizational workflow data. We identified three major challenges to coordination between ED and EMS teams including ineffectiveness of current information and communication technologies, lack of common ground, and breakdowns in information flow. The three challenges highlight the importance of designing systems from socio-technical perspective. In particular, these inter-team coordination systems must support socio-technical issues such as awareness, context, and workflow between the two teams.

Rapidly Deployed Modular Telemetry System

NASA Technical Reports Server (NTRS)

Varnavas, Kosta A. (Inventor); Sims, William Herbert, III (Inventor)

2013-01-01

The present invention is a telemetry system, and more specifically is a rapidly deployed modular telemetry apparatus which utilizes of SDR technology and the FPGA programming capability to reduce the number of hardware components and programming required to deploy a telemetry system.

Optimization modeling of U.S. renewable electricity deployment using local input variables

NASA Astrophysics Data System (ADS)

Bernstein, Adam

For the past five years, state Renewable Portfolio Standard (RPS) laws have been a primary driver of renewable electricity (RE) deployments in the United States. However, four key trends currently developing: (i) lower natural gas prices, (ii) slower growth in electricity demand, (iii) challenges of system balancing intermittent RE within the U.S. transmission regions, and (iv) fewer economical sites for RE development, may limit the efficacy of RPS laws over the remainder of the current RPS statutes' lifetime. An outsized proportion of U.S. RE build occurs in a small number of favorable locations, increasing the effects of these variables on marginal RE capacity additions. A state-by-state analysis is necessary to study the U.S. electric sector and to generate technology specific generation forecasts. We used LP optimization modeling similar to the National Renewable Energy Laboratory (NREL) Renewable Energy Development System (ReEDS) to forecast RE deployment across the 8 U.S. states with the largest electricity load, and found state-level RE projections to Year 2031 significantly lower than thoseimplied in the Energy Information Administration (EIA) 2013 Annual Energy Outlook forecast. Additionally, the majority of states do not achieve their RPS targets in our forecast. Combined with the tendency of prior research and RE forecasts to focus on larger national and global scale models, we posit that further bottom-up state and local analysis is needed for more accurate policy assessment, forecasting, and ongoing revision of variables as parameter values evolve through time. Current optimization software eliminates much of the need for algorithm coding and programming, allowing for rapid model construction and updating across many customized state and local RE parameters. Further, our results can be tested against the empirical outcomes that will be observed over the coming years, and the forecast deviation from the actuals can be attributed to discrete parameter variances.

Civilians at the Tip of the Spear: Civilian Issues Commanders Encounter During Deployments

DTIC Science & Technology

2002-04-01

Service, May 1996; Staff Sgt. Kathleen T. Rhem, �Civilians Vital to DoD Mission,� American Forces Information Service, June 2000. 6 Edwin Dorn...Serge Lazareff, Status of Military Forces Under Current International Law (A.W. Sijthoff, Leyden , Netherlands 1971), 77. 2 James Maloney Spaight, 1911... Kathleen A. Bannister, �One-Stop Shopping at CECOM,� Army Logistics, January- February 1999. 83 Major Mike O. Lacey, CDR Brian J. Bill, eds., Operational

2017 Standard Scenarios Report: A U.S. Electricity Sector Outlook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley; Mai, Trieu; Richards, James

This report summarizes the results of 26 forward-looking “standard scenarios” of the U.S. power sector simulated by the National Renewable Energy Laboratory (NREL) using the Regional Energy Deployment System (ReEDS) and Distributed Generation (dGen) capacity expansion models. The annual Standard Scenarios, which are now in their third year, have been designed to capture a range of possible power system futures considering a variety of factors that impact power sector evolution.

Assessing the impact of nuclear retirements on the U.S. power sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richards, James; Cole, Wesley J.

This work utilizes the Regional Energy Deployment System (ReEDS) model to analyze the impacts of four nuclear retirement scenarios of the U.S. electricity sector, from nuclear plant lifetimes of 50 to 80 years. The analysis finds that longer nuclear lifetimes decrease the amount of renewable and natural gas capacity. Longer nuclear lifetimes also resulted in lower cumulative and annual carbon emissions, lower transmission builds, and higher energy curtailment and water usage.

Technologies to Support Community-Dwelling Persons With Dementia: A Position Paper on Issues Regarding Development, Usability, Effectiveness and Cost-Effectiveness, Deployment, and Ethics

PubMed Central

Innes, Anthea; Mountain, Gail; Robinson, Louise; van der Roest, Henriëtte; García-Casal, J Antonio; Gove, Dianne; Thyrian, Jochen René; Evans, Shirley; Dröes, Rose-Marie; Kelly, Fiona; Kurz, Alexander; Casey, Dympna; Szcześniak, Dorota; Dening, Tom; Craven, Michael P; Span, Marijke; Felzmann, Heike; Tsolaki, Magda; Franco-Martin, Manuel

2017-01-01

Background With the expected increase in the numbers of persons with dementia, providing timely, adequate, and affordable care and support is challenging. Assistive and health technologies may be a valuable contribution in dementia care, but new challenges may emerge. Objective The aim of our study was to review the state of the art of technologies for persons with dementia regarding issues on development, usability, effectiveness and cost-effectiveness, deployment, and ethics in 3 fields of application of technologies: (1) support with managing everyday life, (2) support with participating in pleasurable and meaningful activities, and (3) support with dementia health and social care provision. The study also aimed to identify gaps in the evidence and challenges for future research. Methods Reviews of literature and expert opinions were used in our study. Literature searches were conducted on usability, effectiveness and cost-effectiveness, and ethics using PubMed, Embase, CINAHL, and PsycINFO databases with no time limit. Selection criteria in our selected technology fields were reviews in English for community-dwelling persons with dementia. Regarding deployment issues, searches were done in Health Technology Assessment databases. Results According to our results, persons with dementia want to be included in the development of technologies; there is little research on the usability of assistive technologies; various benefits are reported but are mainly based on low-quality studies; barriers to deployment of technologies in dementia care were identified, and ethical issues were raised by researchers but often not studied. Many challenges remain such as including the target group more often in development, performing more high-quality studies on usability and effectiveness and cost-effectiveness, creating and having access to high-quality datasets on existing technologies to enable adequate deployment of technologies in dementia care, and ensuring that ethical issues are considered an important topic for researchers to include in their evaluation of assistive technologies. Conclusions Based on these findings, various actions are recommended for development, usability, effectiveness and cost-effectiveness, deployment, and ethics of assistive and health technologies across Europe. These include avoiding replication of technology development that is unhelpful or ineffective and focusing on how technologies succeed in addressing individual needs of persons with dementia. Furthermore, it is suggested to include these recommendations in national and international calls for funding and assistive technology research programs. Finally, practitioners, policy makers, care insurers, and care providers should work together with technology enterprises and researchers to prepare strategies for the implementation of assistive technologies in different care settings. This may help future generations of persons with dementia to utilize available and affordable technologies and, ultimately, to benefit from them. PMID:28582262

Large Deployable Reflector Science and Technology Workshop. Volume 3: Systems and Technology Assessment. Introduction

NASA Technical Reports Server (NTRS)

1984-01-01

The Large Deployable Reflector (LDR), a proposed 20 m diameter telescope designed for infrared and submillimeter astronomical measurements from space, is discussed in terms of scientific purposes, capabilities, current status, and history of development. The LDR systems goals and functional/telescope requirements are enumerated.

Safety Outreach and Incident Response Stakeholder Strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosewater, David Martin; Conover, David

2016-06-01

The objective of this document is to set out a strategy to reach all stakeholders that can impact the timely deployment of safe stationary energy storage systems in the built environment with information on ESS technology and safety that is relevant to their role in deployment of the technology.

SATWG networked quality function deployment

NASA Technical Reports Server (NTRS)

Brown, Don

1992-01-01

The initiative of this work is to develop a cooperative process for continual evolution of an integrated, time phased avionics technology plan that involves customers, technologists, developers, and managers. This will be accomplished by demonstrating a computer network technology to augment the Quality Function Deployment (QFD). All results are presented in viewgraph format.

Shifting Interests: Changes in the Lexical Semantics of ED-MEDIA

ERIC Educational Resources Information Center

Wild, Fridolin; Valentine, Chris; Scott, Peter

2010-01-01

Large research networks naturally form complex communities with overlapping but not identical expertise. To map the distribution of professional competence in field of "technology-enhanced learning", the lexical semantics expressed in research articles published in a representative, large-scale conference (ED-MEDIA) can be investigated and changes…

Development of a Strain Energy Deployable Boom for the Space Technology 5 Mission

NASA Technical Reports Server (NTRS)

Meyers, Stew; Sturm, James

2004-01-01

The Space Technology 5 (ST5) mission is one of a series of technology demonstration missions for the New Millennium Program. This mission will fly three fully functional 25-kilogram micro-class spacecraft in formation through the Earth's magnetosphere; the primary science instrument is a very sensitive magnetometer. The constraints of a 25-kg Micosat resulted in a spin stabilized, octagonal spacecraft that is 30 cm tall by 50 cm diameter and has state-of-the-art solar cells on all eight sides. A non-magnetic boom was needed to place the magnetometer as far from the spacecraft and its residual magnetic fields as possible. The ST-5 spacecraft is designed to be spun up and released from its deployer with the boom and magnetometer stowed for later release. The deployer is the topic of another paper. This paper describes the development efforts and resulting self-deploying magnetometer boom.

Development of a Strain Energy Deployable Boom for the Space Technology 5 Mission

NASA Technical Reports Server (NTRS)

Meyers, Stew; Sturm, James

2004-01-01

The Space Technology 5 (ST5) mission is one of a series of technology demonstration missions for the New Millennium Program. This mission will fly three fully functional 25 kilogram micro class spacecraft in formation through the Earth s magnetosphere; the primary science instrument is a very sensitive magnetometer. The constraints of a 25 kg "Micosat" resulted in a spin stabilized, octagonal spacecraft that is 30 cm tall by 50 cm diameter and has state of the art solar cells on all eight sides. A non-magnetic boom was needed to place the magnetometer as far from the spacecraft and its residual magnetic fields as possible. The ST-5 spacecraft is designed to be spun up and released from its deployer with the boom and magnetometer stowed for later release. The deployer is the topic of another paper, This paper describes the development efforts and resulting self-deploying magnetometer boom.

An annual cycle of phytoplankton biomass in the Arabian Sea, 1994 1995, as determined by moored optical sensors

NASA Astrophysics Data System (ADS)

Kinkade, C. S.; Marra, J.; Dickey, T. D.; Weller, R.

A surface-to-bottom mooring in the central Arabian Sea (15.5°N, 61.5°E) deployed from October 1994 to October 1995, included fluorometers, PAR irradiance sensors, Lu 683 sensors, and a spectral radiometer. An annual cycle of phytoplankton biomass was determined by transforming signals from the optical sensors into chlorophyll a (chl a). Half-yearly phytoplankton blooms with water-column stratification were observed near the end of each monsoon, as well as biomass increases in response to mesoscale flow features. During the Northeast Monsoon, the integrate water-column chl a rose from 15 to 25 mg m -2, while during the Southwest Monsoon, chl a increased from 15 to a maximum >40 mg m -2. We present an empirical relationship between the ratio of downwelling Ed443/ Ed550 (blue to green wavelength ratio) and integral euphotic zone chl a determined by moored fluorometers ( r2=0.73). There is a more significant relationship between Ed443/ Ed550 measured at one depth in the water column (65 m) and the average vertical attenuation coefficient for PAR (K PAR) between 0 and 65 m ( r2=0.845). Because biofouling was a significant problem at times, data return from any one sensor was incomplete. However, optical sensor/data intercomparison helped fill gaps while permitting investigation of the temporal variability in observed phytoplankton biomass.

Development of deployable structures for large space platforms. Volume 2: Design development

NASA Technical Reports Server (NTRS)

Greenberg, H. S.

1983-01-01

Design evolution, test article design, test article mass properties, and structural analysis of deployable platform systems are discussed. Orbit transfer vehicle (OTV) hangar development, OTV hangar concept selection, and manned module development are discussed. Deployable platform systems requirements, material data base, technology development needs, concept selection and deployable volume enclosures are also discussed.

Enabling Venus In-Situ Science - Deployable Entry System Technology, Adaptive Deployable Entry and Placement Technology (ADEPT): A Technology Development Project funded by Game Changing Development Program of the Space Technology Program

NASA Technical Reports Server (NTRS)

Wercinski, Paul F.; Venkatapathy, Ethiraj; Gage, Peter J.; Yount, Bryan C.; Prabhu, Dinesh K.; Smith, Brandon; Arnold, James O.; Makino, alberto; Peterson, Keith Hoppe; Chinnapongse, Ronald I.

2012-01-01

Venus is one of the important planetary destinations for scientific exploration, but: The combination of extreme entry environment coupled with extreme surface conditions have made mission planning and proposal efforts very challenging. We present an alternate, game-changing approach (ADEPT) where a novel entry system architecture enables more benign entry conditions and this allows for greater flexibility and lower risk in mission design

The 15th Aerospace Mechanisms Symposium

NASA Technical Reports Server (NTRS)

1981-01-01

Technological areas covered include: aerospace propulsion; aerodynamic devices; crew safety; space vehicle control; spacecraft deployment, positioning, and pointing; deployable antennas/reflectors; and large space structures. Devices for payload deployment, payload retention, and crew extravehicular activities on the space shuttle orbiter are also described.

Review of Smartphone Applications for the Treatment of Eating Disorders

PubMed Central

Juarascio, Adrienne S.; Manasse, Stephanie M.; Goldstein, Stephanie P.; Forman, Evan M.; Butryn, Meghan L.

2016-01-01

mHealth tools may be a feasible modality for delivering evidence-based treatments and principles (EBPs), and may enhance treatment for eating disorders (EDs). However, research on the efficacy of mHealth tools for EDs and the extent to which they include EBPs is lacking. The current study sought to (i) review existing apps for EDs, (ii) determine the extent to which available treatment apps utilize EBPs, and (iii) assess the degree to which existing smartphone apps utilize recent advances in smartphone technology. Overall, existing ED intervention apps contained minimal EBPs and failed to incorporate smartphone capabilities. For smartphone apps to be a feasible and effective ED treatment modality, it may be useful for creators to begin taking utilizing the abilities that set smartphones apart from in-person treatment while incorporating EBPs. Before mHealth tools are incorporated into treatments for EDs, it is necessary that the feasibility, acceptability, and efficacy be evaluated. PMID:25303148

More Than 1,000 Fuel Cell Units Deployed Through DOE ARRA Funding (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This NREL Hydrogen and Fuel Cell Technical Highlight describes how early market end users are operating 1,111 fuel cell units at 301 sites in 20 states with funding from the U.S. Department of Energy Fuel Cell Technologies Program and analysis by NREL. The American Recovery and Reinvestment Act (ARRA) funded the deployment of approximately 1,000 fuel cell systems in key early markets to accelerate the commercialization and deployment of fuel cells and fuel cell manufacturing, installation, maintenance, and support services. In support of the ARRA fuel cell deployment objectives, NREL analyzes and validates the technology in real-world applications, reports onmore » the technology status, and facilitates the development of fuel cell technologies, manufacturing, and operations in strategic markets-including material handling equipment, backup power, and stationary power-where fuel cells can compete with conventional technologies. NREL is validating hydrogen and fuel cell systems in real-world settings through data collection, analysis, and reporting. The fuel cell and infrastructure analysis provides an independent, third-party assessment that focuses on fuel cell system and hydrogen infrastructure performance, operation, maintenance, use, and safety. An objective of the ARRA fuel cell project-to deploy approximately 1,000 fuel cell systems in key early markets - has been met in two years. By the end of 2011, 504 material handling equipment (MHE) fuel cell units were operating at 8 facilities and 607 backup power fuel cell units were operating at 293 sites. MHE and backup power are two markets where fuel cells are capable of meeting the operating demands, and deployments can be leveraged to accelerate fuel cell commercialization.« less

Smart and intelligent sensor payload project

NASA Image and Video Library

2009-04-01

Engineers working on the smart and intelligent sensor payload project include (l to r): Ed Conley (NASA), Mark Mitchell (Jacobs Technology), Luke Richards (NASA), Robert Drackett (Jacobs Technology), Mark Turowski (Jacobs Technology) , Richard Franzl (seated, Jacobs Technology), Greg McVay (Jacobs Technology), Brianne Guillot (Jacobs Technology), Jon Morris (Jacobs Technology), Stephen Rawls (NASA), John Schmalzel (NASA) and Andrew Bracey (NASA).

Quick wins connected vehicles deployment scenario : a grassroots approach to safer roads, greater mobility, and cleaner air.

DOT National Transportation Integrated Search

2011-01-01

The Quick Wins Connected Vehicles deployment scenario provides stakeholders from planners, to operators, to manufacturers, to policymakers with a defensible path towards the deployment of Connected Vehicles technologies over the next half-dec...

Detecting internet activity for erectile dysfunction using search engine query data in the Republic of Ireland.

PubMed

Davis, Niall F; Smyth, Lisa G; Flood, Hugh D

2012-12-01

What's known on the subject? and What does the study add? Despite the increasing prevalence of erectile dysfunction (ED), there is reluctance among symptomatic patients to present to healthcare providers for appropriate advice and treatment. A number of Internet campaigns have been launched by the Irish healthcare media since 2007 aiming to provide easily accessible advice on ED. Novel online technologies appear to provide a useful tool for educating the general public on the symptoms of ED because there has been a significant increase in overall Internet search activity for this term since 2007. • To assess Internet search trends for erectile dysfunction (ED) subsequent to public awareness campaigns being launched within the Republic of Ireland • To assess whether the advent of such campaigns correlates with increased Internet search activity for ED. • Google insights for search was utilized to examine Internet search trends for the term 'erectile dysfunction' across all categories between January 2005 and December 2011. • Search activity was limited to users from the Republic of Ireland within this timeframe. • Additionally, the number of Irish Internet media campaigns and Irish web pages providing information on ED was assessed between January 2005 and December 2011. • Statistical analysis of the data was performed using analysis of variance and Student's t-tests for pairwise comparisons. • There has been a significant increase in mean search activity for ED on an annual basis since 2007 (P < 0.001). • The number of Irish web pages associated with information on ED has also increased significantly on an annual basis since 2007 (P < 0.001). • There have been seven different Irish Internet media campaigns on ED since 2007 compared to two from 2005 to 2007 (P < 0.001). • There was no significant change in mean search activity for ED from 2005 to 2007 • The advent of recent Internet media campaigns and increasing number of Irish web pages is associated with a significant increase in online activity for ED in the Republic of Ireland. • Novel online technologies appear to provide a useful tool for educating the general public on the symptoms and treatment options available for ED. © 2012 BJU INTERNATIONAL.

Beyond Widgets -- Systems Incentive Programs for Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regnier, Cindy; Mathew, Paul; Robinson, Alastair

Utility incentive programs remain one of the most significant means of deploying commercialized, but underutilized building technologies to scale. However, these programs have been largely limited to component-based products (e.g., lamps, RTUs). While some utilities do provide ‘custom’ incentive programs with whole building and system level technical assistance, these programs require deeper levels of analysis, resulting in higher program costs. This results in custom programs being restricted to utilities with greater resources, and are typically applied mainly to large or energy-intensive facilities, leaving much of the market without cost effective access and incentives for these solutions. In addition, with increasinglymore » stringent energy codes, cost effective component-based solutions that achieve significant savings are dwindling. Building systems (e.g., integrated façade, HVAC and/or lighting solutions) can deliver higher savings that translate into large sector-wide savings if deployed at the scale of these programs. However, systems application poses a number of challenges – baseline energy use must be defined and measured; the metrics for energy and performance must be defined and tested against; in addition, system savings must be validated under well understood conditions. This paper presents a sample of findings of a project to develop validated utility incentive program packages for three specific integrated building systems, in collaboration with Xcel Energy (CO, MN), ComEd, and a consortium of California Public Owned Utilities (CA POUs) (Northern California Power Agency(NCPA) and the Southern California Public Power Authority(SCPPA)). Furthermore, these program packages consist of system specifications, system performance, M&V protocols, streamlined assessment methods, market assessment and implementation guidance.« less

Technology for School-Based Assessment and Assessment for Learning: Development Principles from New Zealand

ERIC Educational Resources Information Center

Hattie, John A. C.; Brown, Gavin T. L.

2008-01-01

National assessment systems can be enhanced with effective school-based assessment (SBA) that allows teachers to focus on improvement decisions. Modern computer-assisted technology systems are often used to deploy SBA systems. Since 2000, New Zealand has researched, developed, and deployed a national, computer-assisted SBA system. Eight major…

A Systematic Review on Recent Advances in mHealth Systems: Deployment Architecture for Emergency Response

PubMed Central

2017-01-01

The continuous technological advances in favor of mHealth represent a key factor in the improvement of medical emergency services. This systematic review presents the identification, study, and classification of the most up-to-date approaches surrounding the deployment of architectures for mHealth. Our review includes 25 articles obtained from databases such as IEEE Xplore, Scopus, SpringerLink, ScienceDirect, and SAGE. This review focused on studies addressing mHealth systems for outdoor emergency situations. In 60% of the articles, the deployment architecture relied in the connective infrastructure associated with emergent technologies such as cloud services, distributed services, Internet-of-things, machine-to-machine, vehicular ad hoc network, and service-oriented architecture. In 40% of the literature review, the deployment architecture for mHealth considered traditional connective infrastructure. Only 20% of the studies implemented an energy consumption protocol to extend system lifetime. We concluded that there is a need for more integrated solutions specifically for outdoor scenarios. Energy consumption protocols are needed to be implemented and evaluated. Emergent connective technologies are redefining the information management and overcome traditional technologies. PMID:29075430

A Systematic Review on Recent Advances in mHealth Systems: Deployment Architecture for Emergency Response.

PubMed

Gonzalez, Enrique; Peña, Raul; Avila, Alfonso; Vargas-Rosales, Cesar; Munoz-Rodriguez, David

2017-01-01

The continuous technological advances in favor of mHealth represent a key factor in the improvement of medical emergency services. This systematic review presents the identification, study, and classification of the most up-to-date approaches surrounding the deployment of architectures for mHealth. Our review includes 25 articles obtained from databases such as IEEE Xplore, Scopus, SpringerLink, ScienceDirect, and SAGE. This review focused on studies addressing mHealth systems for outdoor emergency situations. In 60% of the articles, the deployment architecture relied in the connective infrastructure associated with emergent technologies such as cloud services, distributed services, Internet-of-things, machine-to-machine, vehicular ad hoc network, and service-oriented architecture. In 40% of the literature review, the deployment architecture for mHealth considered traditional connective infrastructure. Only 20% of the studies implemented an energy consumption protocol to extend system lifetime. We concluded that there is a need for more integrated solutions specifically for outdoor scenarios. Energy consumption protocols are needed to be implemented and evaluated. Emergent connective technologies are redefining the information management and overcome traditional technologies.

2014 Summer Series - Ethiraj Venkatapathy - Mary Poppins Approach to Human Mars Mission Entry, Descent and Landing

NASA Image and Video Library

2014-06-17

NASA is investing in a number of technologies to extend Entry, Descent and Landing (EDL) capabilities to enable Human Missions to Mars. These technologies will also enable robotic Science missions. Human missions will require landing payloads of 10?s of metric tons, not possible with today's technology. Decelerating from entry speeds around 15,000 miles per hour to landing in a matter of minutes will require very large drag or deceleration. The one way to achieve required deceleration is to deploy a large surface that can be stowed during launch and deployed prior to entry. This talk will highlight a simple concept similar to an umbrella. Though the concept is simple, the size required for human Mars missions and the heating encountered during entry are significant challenges. The mechanically deployable system can also enable robotic science missions to Venus and is also equally applicable for bringing back cube-satellites and other small payloads. The scalable concept called Adaptive Deployable Entry and Placement Technology (ADEPT) is under development and is the focus of this talk.

Development of deployable structures for large space platform systems, volume 1

NASA Technical Reports Server (NTRS)

1982-01-01

Generic deployable spacecraft configurations and deployable platform systems concepts were identified. Sizing, building block concepts, orbiter packaging, thermal analysis, cost analysis, and mass properties analysis as related to platform systems integration are considered. Technology needs are examined and the major criteria used in concept selection are delineated. Requirements for deployable habitat modules, tunnels, and OTV hangars are considered.

Electrodynamic Dust Shield for Space Applications

NASA Technical Reports Server (NTRS)

Mackey, Paul J.; Johansen, Michael R.; Olsen, Robert C.; Raines, Matthew G.; Phillips, James R., III; Cox, Rachel E.; Hogue, Michael D.; Pollard, Jacob R. S.; Calle, Carlos I.

2016-01-01

Dust mitigation technology has been highlighted by NASA and the International Space Exploration Coordination Group (ISECG) as a Global Exploration Roadmap (GER) critical technology need in order to reduce life cycle cost and risk, and increase the probability of mission success. The Electrostatics and Surface Physics Lab in Swamp Works at the Kennedy Space Center has developed an Electrodynamic Dust Shield (EDS) to remove dust from multiple surfaces, including glass shields and thermal radiators. Further development is underway to improve the operation and reliability of the EDS as well as to perform material and component testing outside of the International Space Station (ISS) on the Materials on International Space Station Experiment (MISSE). This experiment is designed to verify that the EDS can withstand the harsh environment of space and will look to closely replicate the solar environment experienced on the Moon.

Mechanical Technology Development on A 35-m Deployable Radar Antenna for Monitoring Hurricanes

NASA Technical Reports Server (NTRS)

Fang, Houfei; Im, Eastwood

2006-01-01

The NEXRAD in Space project develops a novel instrument concept and the associated antenna technologies for a 35-GHz Doppler radar to monitor hurricanes, cyclones, and severe storms from a geostationary orbit. Mechanical challenges of this concept include a 35-m diameter lightweight in space deployable spherical reflector and a feeder scanning mechanism. The feasibility of using shape memory polymer material to develop the large deployable reflector has been investigated by this study. A spiral scanning mechanism concept has been developed and demonstrated by an engineering model.

Practice brief. Securing wireless technology for healthcare.

PubMed

Retterer, John; Casto, Brian W

2004-05-01

Wireless networking can be a very complex science, requiring an understanding of physics and the electromagnetic spectrum. While the radio theory behind the technology can be challenging, a basic understanding of wireless networking can be sufficient for small-scale deployment. Numerous security mechanisms are available to wireless technologies, making it practical, scalable, and affordable for healthcare organizations. The decision on the selected security model should take into account the needs for additional server hardware and administrative costs. Where wide area network connections exist between cooperative organizations, deployment of a distributed security model can be considered to reduce administrative overhead. The wireless approach chosen should be dynamic and concentrate on the organization's specific environmental needs. Aspects of organizational mission, operations, service level, and budget allotment as well as an organization's risk tolerance are all part of the balance in the decision to deploy wireless technology.

Connected Vehicle Pilot Deployment Program phase 1 : deployment readiness summary : Tampa (THEA) : final report.

DOT National Transportation Integrated Search

2016-09-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program intends to develop a suite of applications that utilize vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication technology to reduce...

Connected Vehicle Pilot Deployment Program phase 1 : application deployment : Tampa (THEA) : final report.

DOT National Transportation Integrated Search

2016-09-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication technology to re...

Connected Vehicle Pilot Deployment Program phase 1 : deployment readiness summary : ICF/Wyoming : final report.

DOT National Transportation Integrated Search

2016-09-13

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Twitter Chats: Connect, Foster, and Engage Internal Extension Networks

ERIC Educational Resources Information Center

Seger, Jamie; Hill, Paul; Stafne, Eric; Swadley, Emy

2017-01-01

The eXtension Educational Technology Learning Network (EdTechLN) has found Twitter to be an effective form of informal communication for routinely engaging network members. Twitter chats provide Extension professionals an opportunity to reach and engage one other. As the EdTechLN's experimentation with Twitter chats has demonstrated, the use of…

Give Your Old-School Curriculum a NETS Makeover

ERIC Educational Resources Information Center

LaMaster, Jen

2012-01-01

Integrating digital age technology into an industrial age educational system is hard enough. Imagine introducing ed tech to a 450-year-old Jesuit educational paradigm. Find out how to seamlessly combine the NETS with a centuries-old framework to create an effective ed tech strategic plan. This article describes how the author successfully…

78 FR 30900 - Agency Information Collection Activities; Submission to the Office of Management and Budget for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

... DEPARTMENT OF EDUCATION [Docket No.: ED-2013-ICCD-0067] Agency Information Collection Activities... INFORMATION: The Department of Education (ED), in accordance with the Paperwork Reduction Act of 1995 (PRA..., including through the use of information technology. Please note that written comments received in response...

ED QUEST: A Model Procedure for Futures Planning in Educational Organizations.

ERIC Educational Resources Information Center

Adams, Charles F.

Most educational planning models are weak at identifying future events and assessing their impact on education. At best they assume a surprise-free future in which present trends continue unabated and interrelationships among social, economic, political, and technological forces stay the same. The ED QUEST model was developed to ameliorate these…

Change and the Operational Commander

DTIC Science & Technology

1996-01-01

heaval, and domestic imperatives. The horse gave way to the tank and airplane, and a continental military became a for- ward deployed superpower. Guns and...of Social Sciences at West Point. Change and the Operational Commander By J A Y M. P A R K E R U .S . N av y (T ed S al oi s) JFQPrkr 9/19/96 1...shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1

The Deployment Life Study: Methodological Overview and Baseline Sample Description

DTIC Science & Technology

2014-01-01

Iraq War Veterans,” American Journal of Psychiatry, Vol. 164, No.  1 , 2007, pp. 150–153. Homer, The Odyssey of Homer, Richmond Lattimore, trans., New...returning from World War II (Hill, 1949). Across time, the aspirations of warriors and their families have not changed much. In survey after survey...Psychology, Vol. 63, No.  1 , March 1990, pp.  1 –18. American Psychiatric Association, Diagnostic and Statistical Manual of Mental Disorders, 4th ed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Patrick; Logan, Jeffrey; Bird, Lori

This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

TechEdSat - An Educational 1U CubeSat Architecture Using Plug-and-Play Avionics

NASA Technical Reports Server (NTRS)

Frost, Chad

2015-01-01

Mission Objectives: build a 1U cubesat within 6 months from kickoff to launch. Demonstrate and evaluate the Space Plug-and-Play avionics hardware and software from ÅAC Microtec; investigate both Iridium and Orbcomm intersatellite communication as a method of eliminating the requirement for a physical ground station in Nano satellite missions; demonstrate the capabilities of the JAXA J-SSOD aboard the ISS, and be one of the first cubesats to be deployed from the ISS.

Extending the role of a healthcare digital library environment to support orthopaedic research.

PubMed

Miles-Board, Timothy; Carr, Leslie; Wills, Gary; Power, Guillermo; Bailey, Christopher; Hall, Wendy; Stenning, Matthew; Grange, Simon

2006-06-01

A digital archive, together with its users and its contents, does not exist in isolation; there is a cycle of activities which provides the context for the archive's existence. In arguing for the broadening of the traditional view of digital libraries as merely collections towards the processes of collecting and deploying, we have developed an extend ed digital library environment for orthopaedic surgeons which bridges the gap between the undertaking of experimental work and the dissemination of its results through electronic publication.

Is It in U.S. National Interests to Maintain Forward Deployed Military Forces in Asia

DTIC Science & Technology

2001-05-01

also desires to purchase four Arleigh Burke -Class Guided Missile Destroyers (AEGIS) from the U.S. to provide it the capability to intercept China’s land...missile defense with the 7th Fleet’s two Aleigh Burke -Class Destroyers. Even if President George W. Bush’s Administration decides to sell Taiwan the...East, ed. Joe C. Dixon (Washington D.C.: U.S. Government Printing Office, 1980), 21. 16 Claude A. Buss , The United States and the Philippines

Using Video Conferencing to Deliver a Brief Motivational Intervention for Alcohol and Sex Risk to Emergency Department Patients: A Proof-of-Concept Pilot Study

PubMed Central

Celio, Mark A.; Mastroleo, Nadine R.; DiGuiseppi, Graham; Barnett, Nancy P.; Colby, Suzanne M.; Kahler, Christopher W.; Operario, Don; Suffoletto, Brian; Monti, Peter M.

2016-01-01

Brief motivational intervention (MI) is an efficacious approach to reduce heavy drinking and associated sexual risk behavior among Emergency Department (ED) patients, but the intensity of demands placed on ED staff makes the implementation of in-person MIs logistically challenging. This proof-of-concept pilot study examined the acceptability and logistic feasibility of using video-conferencing technology to deliver an MI targeting heavy drinking and risky sexual behavior to patients in an ED setting. Rigorous screening procedures were employed to ensure that the pilot sample represents the target portion of ED patients who would benefit from this multi-target MI. Mixed qualitative and quantitative data from a sample of seven ED patients (57% Female; Mage = 35 years) who received MI by video conference consistently demonstrated high levels of satisfaction, engagement, and acceptability. The observed completion rate supports logistic feasibility, and patient feedback identified methods to improve the experience by using high-definition hardware, ensuring stronger network connectivity, and effectively communicating information regarding protection of privacy. Post-intervention patient ratings and independent ratings of the audio-recorded sessions (using the Motivational Interviewing Skills Coding system) were very high, suggesting that intervention fidelity and MI adherence was not compromised by delivery modality. Collectively, these data suggest video conferencing is a viable technology that can be employed to implement brief evidence-based MIs in ED settings. PMID:28649188

Using Video Conferencing to Deliver a Brief Motivational Intervention for Alcohol and Sex Risk to Emergency Department Patients: A Proof-of-Concept Pilot Study.

PubMed

Celio, Mark A; Mastroleo, Nadine R; DiGuiseppi, Graham; Barnett, Nancy P; Colby, Suzanne M; Kahler, Christopher W; Operario, Don; Suffoletto, Brian; Monti, Peter M

2017-01-01

Brief motivational intervention (MI) is an efficacious approach to reduce heavy drinking and associated sexual risk behavior among Emergency Department (ED) patients, but the intensity of demands placed on ED staff makes the implementation of in-person MIs logistically challenging. This proof-of-concept pilot study examined the acceptability and logistic feasibility of using video-conferencing technology to deliver an MI targeting heavy drinking and risky sexual behavior to patients in an ED setting. Rigorous screening procedures were employed to ensure that the pilot sample represents the target portion of ED patients who would benefit from this multi-target MI. Mixed qualitative and quantitative data from a sample of seven ED patients (57% Female; M age = 35 years) who received MI by video conference consistently demonstrated high levels of satisfaction, engagement, and acceptability. The observed completion rate supports logistic feasibility, and patient feedback identified methods to improve the experience by using high-definition hardware, ensuring stronger network connectivity, and effectively communicating information regarding protection of privacy. Post-intervention patient ratings and independent ratings of the audio-recorded sessions (using the Motivational Interviewing Skills Coding system) were very high, suggesting that intervention fidelity and MI adherence was not compromised by delivery modality. Collectively, these data suggest video conferencing is a viable technology that can be employed to implement brief evidence-based MIs in ED settings.

Emergency department characteristics and capabilities in Bogotá, Colombia.

PubMed

Bustos, Yury; Castro, Jenny; Wen, Leana S; Sullivan, Ashley F; Chen, Dinah K; Camargo, Carlos A

2015-12-01

Emergency departments (EDs) are a critical, yet heterogeneous, part of international emergency care. The National ED Inventories (NEDI) survey has been used in multiple countries as a standardized method to benchmark ED characteristics. We sought to describe the characteristics, resources, capabilities, and capacity of EDs in the densely populated capital city of Bogotá, Colombia. Bogotá EDs accessible to the general public 24/7 were surveyed using the 23-item NEDI survey used in several other countries ( www.emnet-nedi.org ). ED staff were asked about ED characteristics with reference to calendar year 2011. Seventy EDs participated (82 % response). Most EDs (87 %) were located in hospitals, and 83 % were independent hospital departments. The median annual ED visit volume was approximately 50,000 visits. Approximately 90 % (95 % confidence interval (CI) 80-96 %) had a contiguous layout, with medical and surgical care provided in one area. Almost all EDs saw both adults and children (91 %), while 6 % saw only adults and 3 % saw only children. Availability of technological and consultant resources in EDs was variable. Nearly every ED had cardiac monitoring (99 %, 95 % CI 92-100 %), but less than half had a dedicated CT scanner (39 %, 95 % CI 28-52 %). While most EDs were able to treat trauma 24/7 (81 %, 95 % CI 69-89 %), few could manage oncological (22 %, 95 % CI 13-34 %) or dental (3 %, 95 % CI 0-11 %) emergencies 24/7. The typical ED length-of-stay was between 1 and 6 h in 59 % of EDs (95 % CI, 46-70 %), while most others reported that patients remained for >6 h (39 %). Almost half of respondents (46 %, 95 % CI 34-59 %) reported their ED was over capacity. Bogotá EDs have high annual visit volumes and long length-of-stay, and half are over capacity. To meet the emergency care needs of people in Bogotá and other large cities, Colombia should consider improving urban ED capacity and training more emergency medicine specialists capable of efficiently staffing its large and crowded EDs.

Innovation in surgical technology and techniques: Challenges and ethical issues.

PubMed

Geiger, James D; Hirschl, Ronald B

2015-06-01

The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

Investigation of technical problems related to deployment and retrieval of spinning satellites

NASA Technical Reports Server (NTRS)

Kaplan, M. H.

1973-01-01

Results of a three-year research effort on retrieval and deployment problems associated with orbiting payloads are summarized. Answers to several basic questions about rendezvous, docking, and deployment dynamics and controls were obtained. A basic retrieval mission profile was formulated in order to develop relevant technology. A remotely controlled retrieval package was conceived. Special deployment dynamics problems associated with high altitude deployment were investigated, and new knowledge of payload spin reorientation was obtained.

The PROPEL Electrodynamic Tether Mission and Connecting to the Ionosphere

NASA Technical Reports Server (NTRS)

Gilchrist, Brian; Bilen, Sven; Hoyt, Rob; Stone,Nobie; Vaughn, Jason; Fuhrhop, Keith; Krause, Linda; Khazanov, George; Johnson, Les

2012-01-01

The exponential increase of launch system size.and cost.with delta-V makes missions that require large total impulse cost prohibitive. Led by NASA's Marshall Space Flight Center, a team from government, industry, and academia has developed a flight demonstration mission concept of an integrated electrodynamic (ED) tethered satellite system called PROPEL: "Propulsion using Electrodynamics". The PROPEL Mission is focused on demonstrating a versatile configuration of an ED tether to overcome the limitations of the rocket equation, enable new classes of missions currently unaffordable or infeasible, and significantly advance the Technology Readiness Level (TRL) to an operational level. We are also focused on establishing a far deeper understanding of critical processes and technologies to be able to scale and improve tether systems in the future. Here, we provide an overview of the proposed PROPEL mission. One of the critical processes for efficient ED tether operation is the ability to inject current to and collect current from the ionosphere. Because the PROPEL mission is planned to have both boost and deboost capability using a single tether, the tether current must be capable of flowing in both directions and at levels well over 1 A. Given the greater mobility of electrons over that of ions, this generally requires that both ends of the ED tether system can both collect and emit electrons. For example, hollow cathode plasma contactors (HCPCs) generally are viewed as state-of-the-art and high TRL devices; however, for ED tether applications important questions remain of how efficiently they can operate as both electron collectors and emitters. Other technologies will be highlighted that are being investigated as possible alternatives to the HCPC such as Solex that generates a plasma cloud from a solid material (Teflon) and electron emission (only) technologies such as cold-cathode electron field emission or photo-electron beam generation (PEBG) techniques.

Knowledge barriers to PACS adoption and implementation in hospitals.

PubMed

Paré, Guy; Trudel, Marie-Claude

2007-01-01

Drawing on the classical theory of diffusion of innovations advanced by Rogers [E.M. Rogers, Diffusion of Innovations, 4th ed., Free Press, New York, NY, 1995] and on the theory of barriers to innovation [P. Attewell, Technology diffusion and organizational learning: the case of business computing. Organ. Sci. 3 (1992) 1-19; H. Tanriverdi, C.S. Iacono, Knowledge barriers to diffusion of telemedicine. Proceedings of the 20th International Conference on Information Systems, Charlotte, NC, 1999, pp. 39-50; S. Nambisan, Y.-M. Wang, Roadblocks to web technology adoption? Commun. ACM, 42 (1) (1999) 98-101], this study seeks a better understanding of challenges faced in PACS implementations in hospitals and of the strategies required to ensure their success. To attain this objective, we describe and analyze the process used to adopt and implement PACS at two Canadian hospitals. Our findings clearly demonstrate the importance of treating any PACS deployment not simply as a rollout of new technology but as a project that will transform the organization. Proponents of these projects must not lose sight of the fact that, even if technological complexity represents a significant issue, it must not garner all the project team's attention. This situation is even more dangerous, inasmuch as the greatest risk to the implementation often lies elsewhere. It would also appear to be crucial to anticipate and address organizational and behavioral challenges from the very first phase of the innovation process, in order to ensure that all participants will be committed to the project. In order to maximize the likelihood of PACS success, it appears crucial to adopt a proactive implementation strategy, one that takes into consideration all the technical, economic, organizational, and human factors, and does so from the first phase of the innovation process.

Connected Vehicle Pilot Deployment Concept phase 1 : comprehensive Pilot Deployment Plan : ICF Wyoming : draft final report.

DOT National Transportation Integrated Search

2016-08-11

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected Vehicle Pilot Deployment Program Phase 1 : Human Use Approval Summary : New York City

DOT National Transportation Integrated Search

2016-08-04

The New York City (NYC) Connected Vehicle (CV) Pilot Deployment will be the largest deployment of connected vehicle technology to date. The purpose of the human use approval activity is to apply the Institutional Review Board (IRB) process to the NYC...

47 CFR 51.233 - Significant degradation of services caused by deployment of advanced services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... deployment of advanced services. 51.233 Section 51.233 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... relevant state commission that a particular technology deployment is causing the significant degradation..., the relevant state commission, must be supported with specific and verifiable information. (d) Where a...

National survey of emergency departments in Denmark.

PubMed

Wen, Leana S; Anderson, Philip D; Stagelund, Søren; Sullivan, Ashley F; Camargo, Carlos A

2013-06-01

Emergency departments (EDs) are the basic unit of emergency medicine, but often differ in fundamental features. We sought to describe and characterize EDs in Denmark. All EDs open 24/7 to the general public were surveyed using the National ED Inventories survey instrument (http://www.emnet-nedi.org). ED staff were asked about ED characteristics with reference to the calendar year 2008. Twenty-eight EDs participated (82% response). All were located in hospitals. Less than half [43%, 95% confidence interval (CI) 24-63%] were independent departments. Thirty-nine percent (95% CI 22-59%) had a contiguous layout, with medical and surgical care provided in one area. The vast majority of EDs saw both adults and children; only 10% saw adults only and none saw children only. The median number of annual visits was 32 000 (interquartile range, 14 700-47 000). The majority (68%, 95% CI 47-89%) believed that their ED was at good balance or capacity, with 22% responding that they were under capacity and 9% reporting overcapacity. Technological resources were generally available, with the exception of dedicated computed tomography scanners and negative-pressure rooms. Almost all common emergencies were identified as being treatable 24/7 in the EDs. Although there is some variation in their layout and characteristics, most Danish EDs have a high degree of resource availability and are able to treat common emergencies. As Denmark seeks to reform emergency care through ED consolidation, this national survey helps to establish a benchmark for future comparisons.

Emergency Department Telepsychiatry Service Model for a Rural Regional Health System: The First Steps.

PubMed

Meyer, James D; McKean, Alastair J S; Blegen, Rebecca N; Demaerschalk, Bart M

2018-05-09

Emergency departments (EDs) have recognized an increasing number of patients presenting with mental health (MH) concerns. This trend imposes greater demands upon EDs already operating at capacity. Many ED providers do not feel they are optimally prepared to provide the necessary MH care. One consideration in response to this dilemma is to use advanced telemedicine technology for psychiatric consultation. We examined a rural- and community-based health system operating 21 EDs, none of which has direct access to psychiatric consultation. Dedicated beds to MH range from zero (in EDs with only 3 beds) to 6 (in an ED with 38 beds). We conducted a needs assessment of this health system. This included a survey of emergency room providers with a 67% response rate and site visits to directly observe patient flow and communication with ED staff. A visioning workshop provided input from ED staff. Data were also obtained, which reflected ED admissions for the year 2015. The data provide a summary of provider concerns, a summary of MH presentations and diagnosis, and age groupings. The data also provide a time when most MH concerns present to the ED. Based upon these results, a proposed model for delivering comprehensive regional emergency telepsychiatry and behavioral health services is proposed. Emergency telepsychiatry services may be a tenable solution for addressing the shortage of psychiatric consultation to EDs in light of increasing demand for MH treatment in the ED.

Digital Pills to Measure Opioid Ingestion Patterns in Emergency Department Patients With Acute Fracture Pain: A Pilot Study

PubMed Central

Carreiro, Stephanie; Innes, Brendan J; Rosen, Rochelle K; O'Cleirigh, Conall; Mayer, Kenneth H; Boyer, Edward W

2017-01-01

Background Nonadherence to prescribed regimens for opioid analgesic agents contributes to increasing opioid abuse and overdose death. Opioids are frequently prescribed on an as-needed basis, placing the responsibility to determine opioid dose and frequency with the patient. There is wide variability in physician prescribing patterns because of the lack of data describing how patients actually use as-needed opioid analgesics. Digital pill systems have a radiofrequency emitter that directly measures medication ingestion events, and they provide an opportunity to discover the dose, timing, and duration of opioid therapy. Objective The purpose of this study was to determine the feasibility of a novel digital pill system to measure as-needed opioid ingestion patterns in patients discharged from the emergency department (ED) after an acute bony fracture. Methods We used a digital pill with individuals who presented to a teaching hospital ED with an acute extremity fracture. The digital pill consisted of a digital radiofrequency emitter within a standard gelatin capsule that encapsulated an oxycodone tablet. When ingested, the gastric chloride ion gradient activated the digital pill, transmitting a radiofrequency signal that was received by a hip-worn receiver, which then transmitted the ingestion data to a cloud-based server. After a brief, hands-on training session in the ED, study participants were discharged home and used the digital pill system to ingest oxycodone prescribed as needed for pain for one week. We conducted pill counts to verify digital pill data and open-ended interviews with participants at their follow-up appointment with orthopedics or at one week after enrollment in the study to determine the knowledge, attitudes, beliefs, and practices regarding digital pills. We analyzed open-ended interviews using applied thematic analysis. Results We recruited 10 study participants and recorded 96 ingestion events (87.3%, 96/110 accuracy). Study participants reported being able to operate all aspects of the digital pill system after their training. Two participants stopped using the digital pill, reporting they were in too much pain to focus on the novel technology. The digital pill system detected multiple simultaneous ingestion events by the digital pill system. Participants ingested a mean 8 (SD 5) digital pills during the study period and four participants continued on opioids at the end of the study period. After interacting with the digital pill system in the real world, participants found the system highly acceptable (80%, 8/10) and reported a willingness to continue to use a digital pill to improve medication adherence monitoring (90%, 9/10). Conclusions The digital pill is a feasible method to measure real-time opioid ingestion patterns in individuals with acute pain and to develop real-time interventions if opioid abuse is detected. Deploying digital pills is possible through the ED with a short instructional course. Patients who used the digital pill accepted the technology. PMID:28087496

System Level Aerothermal Testing for the Adaptive Deployable Entry and Placement Technology (ADEPT)

NASA Technical Reports Server (NTRS)

Cassell, Alan; Gorbunov, Sergey; Yount, Bryan; Prabhu, Dinesh; de Jong, Maxim; Boghozian, Tane; Hui, Frank; Chen, Y.-K.; Kruger, Carl; Poteet, Carl;

Department of Energy Recovery Act Investment in Biomass Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-11-01

The American Recovery and Reinvestment Act of 2009 (Recovery Act) provided more than $36 billion to the Department of Energy (DOE) to accelerate work on existing projects, undertake new and transformative research, and deploy clean energy technologies across the nation. Of this funding, $1029 million is supporting innovative work to advance biomass research, development, demonstration, and deployment.

Emergency Department Involvement in Accountable Care Organizations in Massachusetts: A Survey Study.

PubMed

Ali, Nissa J; McWilliams, J Michael; Epstein, Stephen K; Smulowitz, Peter B

2017-11-01

We assess Massachusetts emergency department (ED) involvement and internal ED constructs within accountable care organization contracts. An online survey was distributed to 70 Massachusetts ED directors. Questions attempted to assess involvement of EDs in accountable care organizations and the structures in place in EDs-from departmental resources to physician incentives-to help achieve accountable care organization goals of decreasing spending and improving quality. Of responding ED directors, 79% reported alignment between the ED and an accountable care organization. Almost all ED groups (88%) reported bearing no financial risk as a result of the accountable care organization contracts in which their organizations participated. Major obstacles to meeting accountable care organization objectives included care coordination challenges (62%) and lack of familiarity with accountable care organization goals (58%). The most common cost-reduction strategies included ED case management (85%) and information technology (61%). Limitations of this study include that information was self-reported by ED directors, a focus limited to Massachusetts, and a survey response rate of 47%. The ED directors perceived that the majority of physicians were not familiar with accountable care organization goals, many challenges remain in coordinating care for patients in the ED, and most EDs have no financial incentives tied to accountable care organizations. EDs in Massachusetts have begun to implement strategies aimed at reducing admissions, utilization, and overall cost, but these strategies are not widespread apart from case management, even in a state with heavy accountable care organization penetration. Our results suggest that Massachusetts EDs still lack clear directives and direct involvement in meeting accountable care organization goals. Copyright © 2017 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

DEVELOPMENT AND DEPLOYMENT OF THE MOBILE ARM RETRIEVAL SYSTEM (MARS) - 12187

DOE Office of Scientific and Technical Information (OSTI.GOV)

BURKE CA; LANDON MR; HANSON CE

Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pumpmore » (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are beinglhave been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan [1]. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012.« less

Development and Deployment of the Mobile Arm Retrieval System (MARS) - 12187

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, Christopher A.; Landon, Matthew R.; Hanson, Carl E.

Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pumpmore » (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are being/have been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan [1]. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012. (authors)« less

DEVELOPMENT AND DEPLOYMENT OF THE MOBILE ARM RETRIEVAL SYSTEM (MARS) - 12187

DOE Office of Scientific and Technical Information (OSTI.GOV)

BURKE CA; LANDON MR; HANSON CE

Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pumpmore » (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are being/have been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012.« less

Deployable Laboratory Applications of Nano- and Bio-Technology (Applications de nanotechnologie et biotechnologie destinees a un laboratoire deployable)

DTIC Science & Technology

2014-10-01

applications of present nano-/ bio -technology include advanced health and fitness monitoring, high-resolution imaging, new environmental sensor platforms...others areas where nano-/ bio -technology development is needed: • Sensors : Diagnostic and detection kits (gene-chips, protein-chips, lab-on-chips, etc...studies on chemo- bio nano- sensors , ultra-sensitive biochips (“lab-on-a-chip” and “cells-on-chips” devices) have been prepared for routine medical

Environmental Baseline Survey Report for the Title Transfer of Land Parcel ED-4 at the East Tennessee Technology Park, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

SAIC

2008-05-01

This environmental baseline survey (EBS) report documents the baseline environmental conditions of a land parcel referred to as 'ED-4' (ED-4) at the U. S. Department of Energy's (DOE's) East Tennessee Technology Park (ETTP). DOE is proposing to transfer the title of this land to the Heritage Center, LLC. Parcel ED-4 is a land parcel that consists of two noncontiguous areas comprising a total of approximately 18 acres located east of the ETTP. The western tract of ED-4 encompasses approximately 8.5 acres in the northeastern quadrant of the intersection of Boulevard Road and Highway 58. The eastern tract encompasses an areamore » of approximately 9.5 acres in the northwestern quadrant of the intersection of Blair Road and Highway 58 (the Oak Ridge Turnpike). Aerial photographs and site maps from throughout the history of the ETTP, going back to its initial development in the 1940s as the Oak Ridge Gaseous Diffusion Plant (ORGDP), indicate that this area has been undeveloped woodland with the exception of three support facilities for workers constructing the ORGDP since federal acquisition in 1943. These three support facilities, which were located in the western tract of ED-4, included a recreation hall, the Town Hall Camp Operations Building, and the Property Warehouse. A railroad spur also formerly occupied a portion of Parcel ED-4. These former facilities only occupied approximately 5 percent of the total area of Parcel ED-4. This report provides supporting information for the transfer of this government-owned property at ETTP to a non-federal entity. This EBS is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). In order to support a Clean Parcel Determination (CPD) in accordance with CERCLA Sect. 120(h)(4)(d), groundwater and sediment samples were collected within, and adjacent to, the Parcel ED-4 study area. The potential for DOE to make a CPD for ED-4 is further supported by a No Further Investigation (NFI) determination made on land that adjoins ED-4 to the east (DOE 1997a) and to the south (DOE 1997b).« less

Deploying the ODIS robot in Iraq and Afghanistan

NASA Astrophysics Data System (ADS)

Smuda, Bill; Schoenherr, Edward; Andrusz, Henry; Gerhart, Grant

2005-05-01

The wars in Iraq and Afghanistan have shown the importance of robotic technology as a force multiplier and a tool for moving soldiers out of harms way. Situations on the ground make soldiers performing checkpoint operations easy targets for snipers and suicide bombers. Robotics technology reduces risk to soldiers and other personnel at checkpoints. Early user involvement in innovative and aggressive development and acquisition strategies are the key to moving robotic and associated technology into the hands of the user. This paper updates activity associated with rapid development of the Omni-Directional Inspection System (ODIS) robot for under vehicle inspection and reports on our field experience with robotics in Iraq and Afghanistan. In February of 2004, two TARDEC Engineers departed for a mission to Iraq and Afghanistan with ten ODIS Robots. Six robots were deployed in the Green Zone in Baghdad. Two Robots were deployed at Kandahar Army Airfield and two were deployed at Bagram Army Airfield in Afghanistan. The TARDEC Engineers who performed this mission trained the soldiers and provided initial on site support. They also trained Exponent employees assigned to the Rapid Equipping Force in ODIS repair. We will discuss our initial deployment, lessons learned and future plans.

Lessons learned in deploying software estimation technology and tools

NASA Technical Reports Server (NTRS)

Panlilio-Yap, Nikki; Ho, Danny

1994-01-01

Developing a software product involves estimating various project parameters. This is typically done in the planning stages of the project when there is much uncertainty and very little information. Coming up with accurate estimates of effort, cost, schedule, and reliability is a critical problem faced by all software project managers. The use of estimation models and commercially available tools in conjunction with the best bottom-up estimates of software-development experts enhances the ability of a product development group to derive reasonable estimates of important project parameters. This paper describes the experience of the IBM Software Solutions (SWS) Toronto Laboratory in selecting software estimation models and tools and deploying their use to the laboratory's product development groups. It introduces the SLIM and COSTAR products, the software estimation tools selected for deployment to the product areas, and discusses the rationale for their selection. The paper also describes the mechanisms used for technology injection and tool deployment, and concludes with a discussion of important lessons learned in the technology and tool insertion process.

Wind Power Today and Tomorrow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Wind Power Today and Tomorrow is an annual publication that provides an overview of the wind research conducted under the U.S. Department of Energy's Wind and Hydropower Technologies Program. The purpose of Wind Power Today and Tomorrow is to show how DOE supports wind turbine research and deployment in hopes of furthering the advancement of wind technologies that produce clean, low-cost, reliable energy. Content objectives include: educate readers about the advantages and potential for widespread deployment of wind energy; explain the program's objectives and goals; describe the program's accomplishments in research and application; examine the barriers to widespread deployment; describemore » the benefits of continued research and development; facilitate technology transfer; and attract cooperative wind energy projects with industry. This 2003 edition of the program overview also includes discussions about wind industry growth in 2003, how DOE is taking advantage of low wind speed region s through advancing technology, and distributed applications for small wind turbines.« less

Deployment Effects of Marin Renewable Energy Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brian Polagye; Mirko Previsic

2010-06-17

Given proper care in siting, design, deployment, operation and maintenance, marine and hydrokinetic technologies could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood, due to a lack of technical certainty.more » In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based approach to the emerging wave and tidal technology sectors in order to evaluate the impact of these technologies on the marine environment and potentially conflicting uses. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios will capture variations in technical approaches and deployment scales to properly identify and characterize environmental impacts and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential effects of these emerging technologies and focus all stakeholders onto the critical issues that need to be addressed. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory and navigational issues. The results of this study are structured into three reports: 1. Wave power scenario description 2. Tidal power scenario description 3. Framework for Identifying Key Environmental Concerns This is the second report in the sequence and describes the results of conceptual feasibility studies of tidal power plants deployed in Tacoma Narrows, Washington. The Narrows contain many of the same competing stakeholder interactions identified at other tidal power sites and serves as a representative case study. Tidal power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize impacts, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informs the process of selecting representative tidal power devices. The selection criteria is that such devices are at an advanced stage of development to reduce technical uncertainties and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. A number of other developers are also at an advanced stage of development including Verdant Power, which has demonstrated an array of turbines in the East River of New York, Clean Current, which has demonstrated a device off Race Rocks, BC, and OpenHydro, which has demonstrated a device at the European Marine Energy Test Center and is on the verge of deploying a larger device in the Bay of Fundy. MCT demonstrated their device both at Devon (UK) and Strangford Narrows (Northern Ireland). Furthermore OpenHydro, CleanCurrent, and MCT are the three devices being installed at the Minas Passage (Canada). Environmental effects will largely scale with the size of tidal power development. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) an early, small commercial deployment, and (3) a large commercial scale plant. For the three technologies and scales at the selected site, this results in a total of nine deployment scenarios outlined in the report.« less

EdMedia 2012: World Conference on Educational Multimedia, Hypermedia and Telecommunications. Proceedings (Denver, Colorado, June 26-29, 2012)

ERIC Educational Resources Information Center

Amiel, Tel, Ed.; Wilson, Brent, Ed.

2012-01-01

The Association for the Advancement of Computing in Education (AACE) is an international, non-profit educational organization. The Association's purpose is to advance the knowledge, theory, and quality of teaching and learning at all levels with information technology. "EdMedia 2012: World Conference on Educational Multimedia, Hypermedia and…

Teachers as Producers of Data Analytics: A Case Study of a Teacher-Focused Educational Data Science Program

ERIC Educational Resources Information Center

McCoy, Chase; Shih, Patrick C.

2016-01-01

Educational data science (EDS) is an emerging, interdisciplinary research domain that seeks to improve educational assessment, teaching, and student learning through data analytics. Teachers have been portrayed in the EDS literature as users of pre-constructed data dashboards in educational technologies, with little consideration given to them as…

Economic Incentives for Cybersecurity: Using Economics to Design Technologies Ready for Deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vishik, Claire; Sheldon, Frederick T; Ott, David

Cybersecurity practice lags behind cyber technology achievements. Solutions designed to address many problems may and do exist but frequently cannot be broadly deployed due to economic constraints. Whereas security economics focuses on the cost/benefit analysis and supply/demand, we believe that more sophisticated theoretical approaches, such as economic modeling, rarely utilized, would derive greater societal benefits. Unfortunately, today technologists pursuing interesting and elegant solutions have little knowledge of the feasibility for broad deployment of their results and cannot anticipate the influences of other technologies, existing infrastructure, and technology evolution, nor bring the solutions lifecycle into the equation. Additionally, potentially viable solutionsmore » are not adopted because the risk perceptions by potential providers and users far outweighs the economic incentives to support introduction/adoption of new best practices and technologies that are not well enough defined. In some cases, there is no alignment with redominant and future business models as well as regulatory and policy requirements. This paper provides an overview of the economics of security, reviewing work that helped to define economic models for the Internet economy from the 1990s. We bring forward examples of potential use of theoretical economics in defining metrics for emerging technology areas, positioning infrastructure investment, and building real-time response capability as part of software development. These diverse examples help us understand the gaps in current research. Filling these gaps will be instrumental for defining viable economic incentives, economic policies, regulations as well as early-stage technology development approaches, that can speed up commercialization and deployment of new technologies in cybersecurity.« less

Phasor Simulator for Operator Training Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dyer, Jim

2016-09-14

Synchrophasor systems are being deployed in power systems throughout the North American Power Grid and there are plans to integrate this technology and its associated tools into Independent System Operator (ISO)/utility control room operations. A pre-requisite to using synchrophasor technologies in control rooms is for operators to obtain training and understand how to use this technology in real-time situations. The Phasor Simulator for Operator Training (PSOT) project objective was to develop, deploy and demonstrate a pre-commercial training simulator for operators on the use of this technology and to promote acceptance of the technology in utility and ISO/Regional Transmission Owner (RTO)more » control centers.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Timothy M.; Kadavil, Rahul; Palmintier, Bryan

The 21st century electric power grid is transforming with an unprecedented increase in demand and increase in new technologies. In the United States Energy Independence and Security Act of 2007, Title XIII sets the tenets for modernizing the electricity grid through what is known as the 'Smart Grid Initiative.' This initiative calls for increased design, deployment, and integration of distributed energy resources, smart technologies and appliances, and advanced storage devices. The deployment of these new technologies requires rethinking and re-engineering the traditional boundaries between different electric power system domains.

Trickle down Technology: Tech Lessons Learned from Higher Ed

ERIC Educational Resources Information Center

O'Hanlon, Charlene

2010-01-01

Care has to be taken when relating technology's use in college and university lecture halls to the way it's applied in K-12 classrooms. Differences in pedagogy, learning styles, and even attendance can impact the way the respective students in the two environments consume technology, which in turn impacts the technology's effectiveness as a…

The Impact of an Online Collaborative Learning Program on Students' Attitude towards Technology

ERIC Educational Resources Information Center

Magen-Nagar, Noga; Shonfeld, Miri

2018-01-01

This quantitative research examined the contribution of an Online Collaborative Learning (OCL) program on attitudes towards technology in terms of technological anxiety, self-confidence and technology orientation among M.Ed. students. The advanced online collaborative program was implemented at two teacher training colleges in Israel for a period…

Technologies to Support Community-Dwelling Persons With Dementia: A Position Paper on Issues Regarding Development, Usability, Effectiveness and Cost-Effectiveness, Deployment, and Ethics.

PubMed

Meiland, Franka; Innes, Anthea; Mountain, Gail; Robinson, Louise; van der Roest, Henriëtte; García-Casal, J Antonio; Gove, Dianne; Thyrian, Jochen René; Evans, Shirley; Dröes, Rose-Marie; Kelly, Fiona; Kurz, Alexander; Casey, Dympna; Szcześniak, Dorota; Dening, Tom; Craven, Michael P; Span, Marijke; Felzmann, Heike; Tsolaki, Magda; Franco-Martin, Manuel

2017-01-16

With the expected increase in the numbers of persons with dementia, providing timely, adequate, and affordable care and support is challenging. Assistive and health technologies may be a valuable contribution in dementia care, but new challenges may emerge. The aim of our study was to review the state of the art of technologies for persons with dementia regarding issues on development, usability, effectiveness and cost-effectiveness, deployment, and ethics in 3 fields of application of technologies: (1) support with managing everyday life, (2) support with participating in pleasurable and meaningful activities, and (3) support with dementia health and social care provision. The study also aimed to identify gaps in the evidence and challenges for future research. Reviews of literature and expert opinions were used in our study. Literature searches were conducted on usability, effectiveness and cost-effectiveness, and ethics using PubMed, Embase, CINAHL, and PsycINFO databases with no time limit. Selection criteria in our selected technology fields were reviews in English for community-dwelling persons with dementia. Regarding deployment issues, searches were done in Health Technology Assessment databases. According to our results, persons with dementia want to be included in the development of technologies; there is little research on the usability of assistive technologies; various benefits are reported but are mainly based on low-quality studies; barriers to deployment of technologies in dementia care were identified, and ethical issues were raised by researchers but often not studied. Many challenges remain such as including the target group more often in development, performing more high-quality studies on usability and effectiveness and cost-effectiveness, creating and having access to high-quality datasets on existing technologies to enable adequate deployment of technologies in dementia care, and ensuring that ethical issues are considered an important topic for researchers to include in their evaluation of assistive technologies. Based on these findings, various actions are recommended for development, usability, effectiveness and cost-effectiveness, deployment, and ethics of assistive and health technologies across Europe. These include avoiding replication of technology development that is unhelpful or ineffective and focusing on how technologies succeed in addressing individual needs of persons with dementia. Furthermore, it is suggested to include these recommendations in national and international calls for funding and assistive technology research programs. Finally, practitioners, policy makers, care insurers, and care providers should work together with technology enterprises and researchers to prepare strategies for the implementation of assistive technologies in different care settings. This may help future generations of persons with dementia to utilize available and affordable technologies and, ultimately, to benefit from them. ©Franka Meiland, Anthea Innes, Gail Mountain, Louise Robinson, Henriëtte van der Roest, J Antonio García-Casal, Dianne Gove, Jochen René Thyrian, Shirley Evans, Rose-Marie Dröes, Fiona Kelly, Alexander Kurz, Dympna Casey, Dorota Szcześniak, Tom Dening, Michael P Craven, Marijke Span, Heike Felzmann, Magda Tsolaki, Manuel Franco-Martin. Originally published in JMIR Rehabilitation and Assistive Technology (http://rehab.jmir.org), 16.01.2017.

Scanning electron microscopy coupled with energy-dispersive X-ray spectrometry for quick detection of sulfur-oxidizing bacteria in environmental water samples

NASA Astrophysics Data System (ADS)

Sun, Chengjun; Jiang, Fenghua; Gao, Wei; Li, Xiaoyun; Yu, Yanzhen; Yin, Xiaofei; Wang, Yong; Ding, Haibing

2017-01-01

Detection of sulfur-oxidizing bacteria has largely been dependent on targeted gene sequencing technology or traditional cell cultivation, which usually takes from days to months to carry out. This clearly does not meet the requirements of analysis for time-sensitive samples and/or complicated environmental samples. Since energy-dispersive X-ray spectrometry (EDS) can be used to simultaneously detect multiple elements in a sample, including sulfur, with minimal sample treatment, this technology was applied to detect sulfur-oxidizing bacteria using their high sulfur content within the cell. This article describes the application of scanning electron microscopy imaging coupled with EDS mapping for quick detection of sulfur oxidizers in contaminated environmental water samples, with minimal sample handling. Scanning electron microscopy imaging revealed the existence of dense granules within the bacterial cells, while EDS identified large amounts of sulfur within them. EDS mapping localized the sulfur to these granules. Subsequent 16S rRNA gene sequencing showed that the bacteria detected in our samples belonged to the genus Chromatium, which are sulfur oxidizers. Thus, EDS mapping made it possible to identify sulfur oxidizers in environmental samples based on localized sulfur within their cells, within a short time (within 24 h of sampling). This technique has wide ranging applications for detection of sulfur bacteria in environmental water samples.

Ian Baring-Gould | NREL

Science.gov Websites

Competition, and Integrated Deployment programs, Ian assists organizations in the deployment of wind technologies and provides information on the appropriate implementation of wind energy. Ian also manages the

Scalable Data Management, Analysis, and Visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Han-Wei

This report is the entire final report for the SciDAC project authored by the whole team. OSU is part of the contributors to the report. This report is organized into sections and subsections, each covering an area of development and deployment of technologies applied to scientific applications of interest to the Department of Energy. Each sub-section includes: 1) a summary description of the research, development, and deployment carried out, the results and the extent to which the stated project objectives were met; 2) significant results, including major findings, developments, or conclusions; 3) products, such as publications and presentations, software developed,more » project website(s), technologies or techniques, inventions, awards, etc., and 4) conclusions of the projects and future directions for research, development, and deployment in this technology area.« less

NASA/DOD Control/Structures Interaction Technology, 1986

NASA Technical Reports Server (NTRS)

Wright, Robert L. (Compiler)

1986-01-01

Control/structures interactions, deployment dynamics and system performance of large flexible spacecraft are discussed. Spacecraft active controls, deployable truss structures, deployable antennas, solar power systems for space stations, pointing control systems for space station gimballed payloads, computer-aided design for large space structures, and passive damping for flexible structures are among the topics covered.

Joint NASA and DoD deployable optics space experiment

NASA Astrophysics Data System (ADS)

Schulthess, Marcus R.; Levine, Marie B.; Bell, Kevin D.; Leonard, Steve; Vanik, Michael W.

2000-07-01

The Air Force Research Lab is proposing a DoD partnership with NASA on NEXUS; a deployable optics flight demonstrator scheduled to launch in 2004. NEXUS is designed to demonstrate technologies for the Next Generation Space Telescope, primarily the deployment and wave front control of a 2.8 meter optical telescope in space.

The effects of EMR deployment on doctors' work practices: a qualitative study in the emergency department of a teaching hospital.

PubMed

Park, Sun Young; Lee, So Young; Chen, Yunan

2012-03-01

The goal of this study was to examine the effects of medical notes (MD) in an electronic medical records (EMR) system on doctors' work practices at an Emergency Department (ED). We conducted a six-month qualitative study, including in situ field observations and semi-structured interviews, in an ED affiliated with a large teaching hospital during the time periods of before, after, and during the paper-to-electronic transition of the rollout of an EMR system. Data were analyzed using open coding method and various visual representations of workflow diagrams. The use of the EMR in the ED resulted in both direct and indirect effects on ED doctors' work practices. It directly influenced the ED doctors' documentation process: (i) increasing documentation time four to five fold, which in turn significantly increased the number of incomplete charts, (ii) obscuring the distinction between residents' charting inputs and those of attendings, shifting more documentation responsibilities to the residents, and (iii) leading to the use of paper notes as documentation aids to transfer information from the patient bedside to the charting room. EMR use also had indirect consequences: it increased the cognitive burden of doctors, since they had to remember multiple patients' data; it aggravated doctors' multi-tasking due to flexibility in the system use allowing more interruptions; and it caused ED doctors' work to become largely stationary in the charting room, which further contributed to reducing doctors' time with patients and their interaction with nurses. We suggest three guidelines for designing future EMR systems to be used in teaching hospitals. First, the design of documentation tools in EMR needs to take into account what we called "note-intensive tasks" to support the collaborative nature of medical work. Second, it should clearly define roles and responsibilities. Lastly, the system should provide a balance between flexibility and interruption to better manage the complex nature of medical work and to facilitate necessary interactions among ED staff and patients in the work environment. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The deployment of information systems and information technology in field hospitals.

PubMed

Crowe, Ian R J; Naguib, Raouf N G

2010-01-01

Information systems and related technologies continue to develop and have become an integral part of healthcare provision and hospital care in particular. Field hospitals typically operate in the most austere and difficult of conditions and have yet to fully exploit related technologies. This paper addresses those aspects of healthcare informatics, healthcare knowledge management and lean healthcare that can be applied to field hospitals, with a view to improving patient care. The aim is to provide a vision for the deployment of information systems and information technology in field hospitals, using the British Army's field hospital as a representative model.

Capturing the Impact of Storage and Other Flexible Technologies on Electric System Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Elaine; Stoll, Brady; Mai, Trieu

Power systems of the future are likely to require additional flexibility. This has been well studied from an operational perspective, but has been more difficult to incorporate into capacity expansion models (CEMs) that study investment decisions on the decadal scale. There are two primary reasons for this. First, the necessary input data, including cost and resource projections, for flexibility options like demand response and storage are significantly uncertain. Second, it is computationally difficult to represent both investment and operational decisions in detail, the latter being necessary to properly value system flexibility, in CEMs for realistically sized systems. In this work,more » we extend a particular CEM, NREL's Resource Planning Model (RPM), to address the latter issue by better representing variable generation impacts on operations, and then adding two flexible technologies to RPM's suite of investment decisions: interruptible load and utility-scale storage. This work does not develop full suites of input data for these technologies, but is rather methodological and exploratory in nature. We thus exercise these new investment decisions in the context of exploring price points and value streams needed for significant deployment in the Western Interconnection by 2030. Our study of interruptible load finds significant variation by location, year, and overall system conditions. Some locations find no system need for interruptible load even with low costs, while others build the most expensive resources offered. System needs can include planning reserve capacity needs to ensure resource adequacy, but there are also particular cases in which spinning reserve requirements drive deployment. Utility-scale storage is found to require deep cost reductions to achieve wide deployment and is found to be more valuable in some locations with greater renewable deployment. Differences between more solar- and wind-reliant regions are also found: Storage technologies with lower energy capacities are deployed to support solar deployment, and higher energy capacity technologies support wind. Finally, we identify potential future research and areas of improvement to build on this initial analysis.« less

In-step inflatable antenna experiment

NASA Astrophysics Data System (ADS)

Freeland, R. E.; Bilyeu, G.

Large deployable space antennas are needed to accommodate a number of applications that include mobile communications, earth observation radiometry, active microwave sensing, space-orbiting very long baseline interferometry, and Department of Defense (DoD) space-based radar. The criteria for evaluating candidate structural concepts for essentially all the applications is the same; high deployment reliability, low cost, low weight, low launch volume, and high aperture precision. A new class of space structures, called inflatable deployable structures, have tremendous potential for completely satisfying the first four criteria and good potential for accommodating the longer wavelength applications. An inflatable deployable antenna under development by L'Garde Inc. of Tustin, California, represents such a concept. Its level of technology is mature enough to support a meaningful orbital technology experiment. The NASA Office of Aeronautics and Space Technology initiated the In-Space Technology Experiments Program (IN-STEP) specifically to sponsor the verification and/or validation of unique and innovative space technologies in the space environment. The potential of the L'Garde concept has been recognized and resulted in its selection for an IN-STEP experiment. The objective of the experiment is to (a) validate the deployment of a 14-meter, inflatable parabolic reflector structure, (b) measure the reflector surface accuracy, and (c) investigate structural damping characteristics under operational conditions. The experiment approach will be to use the NASA Spartan Spacecraft to carry the experiment on orbit. Reflector deployment will be monitored by two high-resolution video cameras. Reflector surface quality will be measured with a digital imaging radiometer. Structural damping will be based on measuring the decay of reflector structure amplitude. The experiment is being managed by the Jet Propulsion Laboratory. The experiment definition phase (Phase B) will be completed by the end of fiscal year (FY) 1992; hardware development (Phase C/D) is expected to start by early FY 1993; and launch is scheduled for 1995. The paper describes the accomplishments to date and the approach for the remainder of the experiment.

Emerging Technologies for Enhanced In Situ Biodenitrification of Nitrate Contaminated Ground Water

NASA Astrophysics Data System (ADS)

Faris, B.; Faris, B.

2001-05-01

One of the most pervasive ground water contaminants in the U.S. is nitrate. Traditional technologies for the remediation of nitrate-contaminated ground water are generally costly, lengthy, and often only partly effective. Enhanced in situ biodenitrification (EISBD) is a developing technology for remediating nitrate contaminated ground water and protecting public and domestic supply wells through in situ reduction. Natural denitrification processes have been well understood for some time. However, managing these processes to effectively remediated contaminated ground water in a timely fashion is innovative. EISBD is a remediation technology through which a carbon source (electron donor) is introduced to a nitrate-contaminated aquifer. Since many aquifers are aerobic, indigenous aerobic bacteria utilize the introduced carbon as a food source and oxygen serves as an electron acceptor. Oxygen in the aquifer becomes depleted, forming an anaerobic aquifer. When this occurs and an abundant carbon source is present, indigenous denitrifying bacteria proliferate and reduce nitrate to nitrogen gas through anaerobic respiration. EISBD technology deployments are currently underway for either remediation of sizable nitrate plumes in ground water systems or the reduction of nitrate contaminated ground water around public and/or domestic well fields dedicated to the production of drinking water. Regulatory enforcement of nitrate plumes has been limited. Pollution prevention programs are in place to limit further nitrate contamination, however, once a site becomes contaminated with nitrates above standards, the deployment of remediation technologies is lacking. With the development and further deployment of EISBD technologies, a cost-effective short-term tool is available for nitrate remediation. A multi-disciplinary team of the Interstate Technology Regulatory Cooperation published a Technology Overview guidance document on the emerging technology of EISBD. ITRC is a state-led, national coalition of personnel from the regulatory and technology programs from 40 states and the District of Columbia; federal agencies; and tribal, public, and industry stakeholders. ITRC is devoted to reducing barriers and speeding interstate deployment of better, more cost-effective, innovative environmental technologies.

Bridging the Gap: How the NYC DOE Is Working to Bring Ed-Tech and Classrooms Together. Report

ERIC Educational Resources Information Center

Villavicencio, Adriana; Schwab, Ben; Lafayette, Camille

2016-01-01

School districts across the country are increasingly seeking out digital tools to support the work of educators, in the hopes of improving students' academic achievement. With the rapid emergence of this new market, many districts have been challenged by the task of identifying and procuring educational technology (ed-tech) products that match the…

The Economic and Quality of Life Impact of Remote Technologies on High Risk Patients and Their Caregivers

DTIC Science & Technology

2009-01-01

leptospirosis in South Vietnam. A study in 150 patients. Annals of Internal Medicine. 1973 Aug;79(2):167-73. 3. Berman SJ, Kundin WD. Scrub typhus in South...Berman SJ. Scrub typhus . In: Hoeprich PD, Jordan MC, Ronald AR, eds. Infectious Diseases 5th ed. Philadelphia: JB Lippincott, 1994. Chapter 113

Embracing the Common Cause Advocating for Ed Tech

ERIC Educational Resources Information Center

Roland, Jennifer

2006-01-01

This is a common response from educators confronted with the notion of advocating for educational technology funding. But, in a time when U.S. funding for Ed Tech is in danger of being cut from the budget, ISTE believes that all of its members, and in fact, all U.S. educators, must become advocates for our common cause. "Effective advocacy from…

Notification Event Architecture for Traveler Screening: Predictive Traveler Screening Using Event Driven Business Process Management

ERIC Educational Resources Information Center

Lynch, John Kenneth

2013-01-01

Using an exploratory model of the 9/11 terrorists, this research investigates the linkages between Event Driven Business Process Management (edBPM) and decision making. Although the literature on the role of technology in efficient and effective decision making is extensive, research has yet to quantify the benefit of using edBPM to aid the…

Selective Plasmonic Enhancement of Electric- and Magnetic-Dipole Radiations of Er Ions.

PubMed

Choi, Bongseok; Iwanaga, Masanobu; Sugimoto, Yoshimasa; Sakoda, Kazuaki; Miyazaki, Hideki T

2016-08-10

Lanthanoid series are unique in atomic elements. One reason is because they have 4f electronic states forbidding electric-dipole (ED) transitions in vacuum and another reason is because they are very useful in current-day optical technologies such as lasers and fiber-based telecommunications. Trivalent Er ions are well-known as a key atomic element supporting 1.5 μm band optical technologies and also as complex photoluminescence (PL) band deeply mixing ED and magnetic-dipole (MD) transitions. Here we show large and selective enhancement of ED and MD radiations up to 83- and 26-fold for a reference bulk state, respectively, in experiments employing plasmonic nanocavity arrays. We achieved the marked PL enhancement by use of an optimal design for electromagnetic (EM) local density of states (LDOS) and by Er-ion doping in deep subwavelength precision. We moreover clarify the quantitative contribution of ED and MD radiations to the PL band, and the magnetic Purcell effect in the PL-decay temporal measurement. This study experimentally demonstrates a new scheme of EM-LDOS engineering in plasmon-enhanced photonics, which will be a key technique to develop loss-compensated and active plasmonic devices.

An Approach for Doctoral Students Conducting Context-Specific Review of Literature in IT, ICT, and Educational Technology

ERIC Educational Resources Information Center

Pretto, Gabriella; Curró, Gina

2017-01-01

Since 1980s the rate of technological change has been phenomenal, creating an impact on the information-seeking behaviors of doctoral students and other researchers. When searching the three fields of Information Technology (IT), Information and Communication Technology (ICT), and Educational Technology (EdTech), it is like opening a Pandora's…

Ethernet access network based on free-space optic deployment technology

NASA Astrophysics Data System (ADS)

Gebhart, Michael; Leitgeb, Erich; Birnbacher, Ulla; Schrotter, Peter

2004-06-01

The satisfaction of all communication needs from single households and business companies over a single access infrastructure is probably the most challenging topic in communications technology today. But even though the so-called "Last Mile Access Bottleneck" is well known since more than ten years and many distribution technologies have been tried out, the optimal solution has not yet been found and paying commercial access networks offering all service classes are still rare today. Conventional services like telephone, radio and TV, as well as new and emerging services like email, web browsing, online-gaming, video conferences, business data transfer or external data storage can all be transmitted over the well known and cost effective Ethernet networking protocol standard. Key requirements for the deployment technology driven by the different services are high data rates to the single customer, security, moderate deployment costs and good scalability to number and density of users, quick and flexible deployment without legal impediments and high availability, referring to the properties of optical and wireless communication. We demonstrate all elements of an Ethernet Access Network based on Free Space Optic distribution technology. Main physical parts are Central Office, Distribution Network and Customer Equipment. Transmission of different services, as well as configuration, service upgrades and remote control of the network are handled by networking features over one FSO connection. All parts of the network are proven, the latest commercially available technology. The set up is flexible and can be adapted to any more specific need if required.

Greater Portland intelligent transportation systems (ITS) early deployment plan

DOT National Transportation Integrated Search

1998-03-01

The Greater Portland Intelligent Transportation Systems Early Deployment Plan is a strategic vision of how smart technology can be applied to help improve mobility in Maines largest metropolitan area.

Exposure therapy in eating disorders revisited.

PubMed

Koskina, Antonia; Campbell, Iain C; Schmidt, Ulrike

2013-02-01

Exposure therapy is a widely used and effective form of treatment in anxiety disorders and addictions but evidence for its usefulness in eating disorders (ED) is inconsistent. This paper systematically reviews the literature on the use of exposure therapy in ED, the theory underpinning its use, and the deficits in current knowledge. Databases were searched to 2012. In addition, potential improvements in the use of exposure techniques in ED are considered by drawing upon theory and research involving neuropharmacology, basic and clinical neuroscience, contemporary behavioural and neurobiological research, and technologies such as virtual reality (VR). Copyright © 2012 Elsevier Ltd. All rights reserved.

Free Re-boost Electrodynamic Tether on the International Space Station

NASA Technical Reports Server (NTRS)

Bonometti, Joseph A.; Sorenson, Kirk F.; Jansen, Ralph H.; Dankanich, John W.; Frame, Kyle L.

2005-01-01

The International Space Station (ISS) currently experiences significant orbital drag that requires constant make up propulsion or the Station will quickly reenter the Earth's Atmosphere. The reboost propulsion is presently achieved through the firing of hydrazine rockets at the cost of considerable propellant mass. The problem will inevitably grow much worse as station components continue to be assembled, particularly when the full solar panel arrays are deployed. This paper discusses many long established themes on electrodynamic propulsion in the context of Exploration relevance, shows how to couple unique ISS electrical power system characteristics and suggests a way to tremendously impact ISS's sustainability. Besides allowing launch mass and volume presently reserved for reboost propellant to be reallocated for science experiments and other critically needed supplies, there are a series of technology hardware demonstrations steps that can be accomplished on ISS, which are helpful to NASA s Exploration mission. The suggested ElectroDynamic (ED) tether and flywheel approach is distinctive in its use of free energy currently unusable, yet presently available from the existing solar array panels on ISS. The ideas presented are intended to maximize the utility of Station and radically increase orbital safety.

Q & A with Ed Tech Leaders: Interview with Punya Mishra

ERIC Educational Resources Information Center

Fulgham, Susan M.; Shaughnessy, Michael F.

2015-01-01

Punya Mishra is Professor of Educational Psychology and Educational Technology at Michigan State University, where he directs the Master of Arts in Educational Technology program. He currently chairs the Creativity Special Interest Group at the Society for Information Technology in Teacher Education. He is nationally and internationally recognized…

Radiation Control Coatings Installed on Federal Buildings at Tyndall Air Force Base

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaba, R.L.; Petrie, T.W.

1999-03-16

The technical objectives of this CRADA comprise technology deployment and energy conservation efforts with the radiation control coatings industry and the utility sector. The results of this collaboration include a high-level data reporting, analysis and management system to support the deployment efforts. The technical objectives include successfully install, commission, operate, maintain and document the performance of radiation control coatings on roofs at Tyndall AFB and the Buildings Technology Center at the Oak Ridge National Laboratory; determine the life cycle savings that can be achieved by using radiation control coatings on entire roofs at Tyndall AFB, based on documented installed costmore » and operating maintenance costs with and without the coatings; determine if any specific improvements are required in the coatings before they can be successfully deployed in the federal sector; determine the most effective way to facilitate the widespread and rapid deployment of radiation control coatings in the federal sector; and clearly define any barriers to deployment.« less

Supporting Knowledge Transfer in IS Deployment Projects

NASA Astrophysics Data System (ADS)

Schönström, Mikael

To deploy new information systems is an expensive and complex task, and does seldom result in successful usage where the system adds strategic value to the firm (e.g. Sharma et al. 2003). It has been argued that innovation diffusion is a knowledge integration problem (Newell et al. 2000). Knowledge about business processes, deployment processes, information systems and technology are needed in a large-scale deployment of a corporate IS. These deployments can therefore to a large extent be argued to be a knowledge management (KM) problem. An effective deployment requires that knowledge about the system is effectively transferred to the target organization (Ko et al. 2005).

Verify Occulter Deployment Tolerances as Part of NASA's Technology Development for Exoplanet Missions

NASA Astrophysics Data System (ADS)

Kasdin, N. J.; Shaklan, S.; Lisman, D.; Thomson, M.; Webb, D.; Cady, E.; Marks, G. W.; Lo, A.

2013-01-01

In support of NASA's Exoplanet Exploration Program and the Technology Development for Exoplanet Missions (TDEM), we recently completed a 2 year study of the manufacturability and metrology of starshade petals. An external occult is a satellite employing a large screen, or starshade, that flies in formation with a spaceborne telescope to provide the starlight suppression needed for detecting and characterizing exoplanets. Among the advantages of using an occulter are the broadband allowed for characterization and the removal of light before entering the observatory, greatly relaxing the requirements on the telescope and instrument. This poster presents the results of our successful first TDEM that demonstrated an occulter petal could be built and measured to an accuracy consistent with close to 10^-10 contrast. We also present the progress in our second TDEM to demonstrate the next critical technology milestone: precision deployment of the central truss and petals to the necessary accuracy. We have completed manufacture of four sub-scale petals and a central hub to fit with an existing deployable truss. We show the plans for repeated stow and deploy tests of the assembly and the metrology to confirm that each deploy repeatably meets the absolute positioning requirements of the petals (better than 1.0 mm).

Testing Starshade Manufacturing and Deployment Through NASA's Technology Development for Exoplanet Missions Program

NASA Astrophysics Data System (ADS)

Kasdin, N. J.; Shaklan, S.; Lisman, D.; Thomson, M.; Cady, E.; Lo, A.; Macintosh, B.

2014-01-01

An external occulter is a satellite employing a large screen, or starshade, that flies in formation with a spaceborne telescope to provide the starlight suppression needed for detecting and characterizing exoplanets. Among the advantages of using an occulter are the broadband allowed for characterization and the removal of light before entering the observatory, greatly relaxing the requirements on the telescope and instrument. In this poster we report on the results of our two Technology Development for Exoplanet Missions (TDEM) studies. In the first we examined the manufacturability and metrology of starshade petals, successfully constructing a full size petal from flight like materials and showing through precise edge shape measurements that an occulter made with petals consistent with the measured accuracy would achieve close to 10^-10 contrast. Our second TDEM tested the deployment precision of a roughly half-scale starshade. We demonstrated the deployment of an existing deployable truss outfitted with four sub-scale petals and a custom designed central hub. We showed that the system can be deployed multiple times with a repeatable positioning accuracy of the petals better than the requirement of 1.0 mm. The combined results of these two TDEM projects has significantly advanced the readiness level of occulter technology and moved the community closer to a realizable mission.

GPON FTTH trial: lessons learned

NASA Astrophysics Data System (ADS)

Weis, Erik; Hölzl, Rainer; Breuer, Dirk; Lange, Christoph

2009-11-01

This paper reports on a FTTH field trial with GPON (Gigabit-capable passive optical network) technology in the network of Deutsche Telekom in the region of the cities of Berlin and Potsdam. Focus of this trial was to gain practical experience regarding GPON technology, fibre installation in existing ducts with micro duct technology, fibre cabling in customer buildings and impact on operational processes. Furthermore it is reported on an initial Deutsche Telekom FTTB deployment based on GPON technology in the city of Dresden with the main targets to obtain practical deployment and operation experiences with fibre-based access networks and to provide broadband access to a part of the city formerly not servable by DSL (digital subscriber line) technology.

Idaho National Laboratory Supervisory Control and Data Acquisition Intrusion Detection System (SCADA IDS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jared Verba; Michael Milvich

2008-05-01

Current Intrusion Detection System (IDS) technology is not suited to be widely deployed inside a Supervisory, Control and Data Acquisition (SCADA) environment. Anomaly- and signature-based IDS technologies have developed methods to cover information technology-based networks activity and protocols effectively. However, these IDS technologies do not include the fine protocol granularity required to ensure network security inside an environment with weak protocols lacking authentication and encryption. By implementing a more specific and more intelligent packet inspection mechanism, tailored traffic flow analysis, and unique packet tampering detection, IDS technology developed specifically for SCADA environments can be deployed with confidence in detecting maliciousmore » activity.« less

Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mirko Previsic

2010-06-17

Given proper care in siting, design, deployment, operation and maintenance, wave energy conversion could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that, due to a lack of technical certainty, many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood,. Inmore » September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based assessment to the emerging hydrokinetic technology sector in order to evaluate the potential impact of these technologies on the marine environment and navigation constraints. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios capture variations in technical approaches and deployment scales to properly identify and characterize environmental effects and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential range of technical attributes and potential effects of these emerging technologies and focus all stakeholders on the critical issues that need to be addressed. By identifying and addressing navigational and environmental concerns in the early stages of the industry’s development, serious mistakes that could potentially derail industry-wide development can be avoided. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory issues (Pacific Energy Ventures) and navigational issues (PCCI). The results of this study are structured into three reports: (1) Wave power scenario description (2) Tidal power scenario description (3) Framework for Identifying Key Environmental Concerns This is the first report in the sequence and describes the results of conceptual feasibility studies of wave power plants deployed in Humboldt County, California and Oahu, Hawaii. These two sites contain many of the same competing stakeholder interactions identified at other wave power sites in the U.S. and serve as representative case studies. Wave power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize potential effects, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informed the process of selecting representative wave power devices. The selection criteria requires that devices are at an advanced stage of development to reduce technical uncertainties, and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. Table 1 summarizes the selected wave power technologies. A number of other developers are also at an advanced stage of development, but are not directly mentioned here. Many environmental effects will largely scale with the size of the wave power plant. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) a small commercial deployment, and (3) a large commercial scale plant. It is important to understand that the purpose of this study was to establish baseline scenarios based on basic device data that was provided to use by the manufacturer for illustrative purposes only.« less

ITS strategic deployment plan

DOT National Transportation Integrated Search

1996-04-01

The purpose of this Intelligent Transportation System (ITS) Deployment Study is to identify : where and how ITS technologies can be applied to improve the safety, efficiency and capacity of : the Cleveland regional transportation network. The general...

Scalable and fail-safe deployment of the ATLAS Distributed Data Management system Rucio

NASA Astrophysics Data System (ADS)

Lassnig, M.; Vigne, R.; Beermann, T.; Barisits, M.; Garonne, V.; Serfon, C.

2015-12-01

This contribution details the deployment of Rucio, the ATLAS Distributed Data Management system. The main complication is that Rucio interacts with a wide variety of external services, and connects globally distributed data centres under different technological and administrative control, at an unprecedented data volume. It is therefore not possible to create a duplicate instance of Rucio for testing or integration. Every software upgrade or configuration change is thus potentially disruptive and requires fail-safe software and automatic error recovery. Rucio uses a three-layer scaling and mitigation strategy based on quasi-realtime monitoring. This strategy mainly employs independent stateless services, automatic failover, and service migration. The technologies used for deployment and mitigation include OpenStack, Puppet, Graphite, HAProxy and Apache. In this contribution, the interplay between these components, their deployment, software mitigation, and the monitoring strategy are discussed.

Submerged RadBall® deployments in Hanford Site hot cells containing 137CsCl capsules.

PubMed

Farfán, Eduardo B; Coleman, J Rusty; Stanley, Steven; Adamovics, John; Oldham, Mark; Thomas, Andrew

2012-07-01

The overall objective of this study was to demonstrate that a new technology, known as RadBall®, could locate submerged radiological hazards. RadBall® is a novel, passive, radiation detection device that provides a 3-D visualization of radiation from areas where measurements have not been previously possible due to lack of access or extremely high radiation doses. This technology has been under development during recent years, and all of its previous tests have included dry deployments. This study involved, for the first time, underwater RadBall® deployments in hot cells containing 137CsCl capsules at the U.S. Department of Energy's Hanford Site. RadBall® can be used to characterize a contaminated room, hot cell, or glovebox by providing the locations of the radiation sources and hazards, identifying the radionuclides present within the cell, and determining the radiation sources' strength (e.g., intensities or dose rates). These parameters have been previously determined for dry deployments; however, only the location of radiation sources and hazards can be determined for an underwater RadBall® deployment. The results from this study include 3-D images representing the location of the radiation sources within the Hanford Site cells. Due to RadBall®'s unique deployability and non-electrical nature, this technology shows significant promise for future characterization of radiation hazards prior to and during the decommissioning of contaminated nuclear facilities.

Controlled field evaluation of water flow rate effects on sampling polar organic compounds using polar organic chemical integrative samplers.

PubMed

Li, Hongxia; Vermeirssen, Etiënne L M; Helm, Paul A; Metcalfe, Chris D

2010-11-01

The uptake of polar organic contaminants into polar organic chemical integrative samplers (POCIS) varies with environmental factors, such as water flow rate. To evaluate the influence of water flow rate on the uptake of contaminants into POCIS, flow-controlled field experiments were conducted with POCIS deployed in channel systems through which treated sewage effluent flowed at rates between 2.6 and 37 cm/s. Both pharmaceutical POCIS and pesticide POCIS were exposed to effluent for 21 d and evaluated for uptake of pharmaceuticals and personal care products (PPCPs) and endocrine disrupting substances (EDS). The pesticide POCIS had higher uptake rates for PPCPs and EDS than the pharmaceutical POCIS, but there are some practical advantages to using pharmaceutical POCIS. The uptake of contaminants into POCIS increased with flow rate, but these effects were relatively small (i.e., less than twofold) for most of the test compounds. There was no relationship observed between the hydrophobicity (log octanol/water partition coefficient, log K(OW)) of model compounds and the effects of flow rate on the uptake kinetics by POCIS. These data indicate that water flow rate has a relatively minor influence on the accumulation of PPCPs and EDS into POCIS. © 2010 SETAC.

Verifying occulter deployment tolerances as part of NASA's technology development for exoplanet missions

NASA Astrophysics Data System (ADS)

Kasdin, N. J.; Lisman, D.; Shaklan, S.; Thomson, M.; Webb, D.; Cady, E.; Marks, G. W.; Lo, A.

2013-09-01

An external occulter is a satellite employing a large screen, or starshade, that flies in formation with a spaceborne telescope to provide the starlight suppression needed for detecting and characterizing exoplanets. Among the advantages of using an occulter are the broadband allowed for characterization and the removal of light before entering the observatory, greatly relaxing the requirements on the telescope and instrument. In support of NASA's Exoplanet Exploration Program and the Technology Development for Exoplanet Missions (TDEM), we recently completed a 2 year study of the manufacturability and metrology of starshade petals. In this paper we review the results of that successful first TDEM which demonstrated an occulter petal could be built and measured to an accuracy consistent with close to 10-10 contrast. We then present the results of our second TDEM to demonstrate the next critical technology milestone: precision deployment of the central truss and petals to the necessary accuracy. We show the deployment of an existing deployable truss outfitted with four sub-scale petals and a custom designed central hub.

Advanced protection technology for ground combat vehicles.

PubMed

Bosse, Timothy G

2012-01-01

Just as highway drivers use radar detectors to attempt to stay ahead of police armed with the latest radar technology, the Armed Forces are locked in a spiral to protect combat vehicles and their crews against the latest threats in both the contemporary operating environment and the anticipated operating environment (ie, beyond 2020). In response to bigger, heavier, or better-protected vehicles, adversaries build and deploy larger explosive devices or bombs. However, making improvements to combat vehicles is much more expensive than deploying larger explosives. In addition, demand is increasing for lighter-weight vehicles capable of rapid deployment. Together, these two facts give the threat a clear advantage in the future. To protect vehicles and crews, technologies focusing on detection and hit avoidance, denial of penetration, and crew survivability must be combined synergistically to provide the best chance of survival on the modern battlefield.

SoLid Detector Technology

NASA Astrophysics Data System (ADS)

Labare, Mathieu

2017-09-01

SoLid is a reactor anti-neutrino experiment where a novel detector is deployed at a minimum distance of 5.5 m from a nuclear reactor core. The purpose of the experiment is three-fold: to search for neutrino oscillations at a very short baseline; to measure the pure 235U neutrino energy spectrum; and to demonstrate the feasibility of neutrino detectors for reactor monitoring. This report presents the unique features of the SoLid detector technology. The technology has been optimised for a high background environment resulting from low overburden and the vicinity of a nuclear reactor. The versatility of the detector technology is demonstrated with a 288 kg detector prototype which was deployed at the BR2 nuclear reactor in 2015. The data presented includes both reactor on, reactor off and calibration measurements. The measurement results are compared with Monte Carlo simulations. The 1.6t SoLid detector is currently under construction, with an optimised design and upgraded material technology to enhance the detector capabilities. Its deployement on site is planned for the begin of 2017 and offers the prospect to resolve the reactor anomaly within about two years.

Effects of Deployments on Spouses of Military Personnel

DTIC Science & Technology

2008-08-01

TECHNOLOGY SUBSTANCE ABUSE TERRORISM AND HOMELAND SECURITY TRANSPORTATION AND INFRASTRUCTURE WORKFORCE AND WORKPLACE The RAND Corporation is a nonprofit...production technology , income and time constraints: max l,X,h1,m1 U(l1, X) (3.1) s.t. l1 + h1 +m1 = 1 h2 +m2 + d = 1 X = XD +XM XD = F (h1, h2) XM = wm1 + vd...b where w is wife’s real after tax wage rate, F (.) is a home production technology , v is basic pay, v deployment pay. In this model, the service

Deployment simulation of a deployable reflector for earth science application

NASA Astrophysics Data System (ADS)

Wang, Xiaokai; Fang, Houfei; Cai, Bei; Ma, Xiaofei

2015-10-01

A novel mission concept namely NEXRAD-In-Space (NIS) has been developed for monitoring hurricanes, cyclones and other severe storms from a geostationary orbit. It requires a space deployable 35-meter diameter Ka-band (35 GHz) reflector. NIS can measure hurricane precipitation intensity, dynamics and its life cycle. These information is necessary for predicting the track, intensity, rain rate and hurricane-induced floods. To meet the requirements of the radar system, a Membrane Shell Reflector Segment (MSRS) reflector technology has been developed and several technologies have been evaluated. However, the deployment analysis of this large size and high-precision reflector has not been investigated. For a pre-studies, a scaled tetrahedral truss reflector with spring driving deployment system has been made and tested, deployment dynamics analysis of this scaled reflector has been performed using ADAMS to understand its deployment dynamic behaviors. Eliminating the redundant constraints in the reflector system with a large number of moving parts is a challenging issue. A primitive joint and flexible struts were introduced to the analytical model and they can effectively eliminate over constraints of the model. By using a high-speed camera and a force transducer, a deployment experiment of a single-bay tetrahedral module has been conducted. With the tested results, an optimization process has been performed by using the parameter optimization module of ADAMS to obtain the parameters of the analytical model. These parameters were incorporated to the analytical model of the whole reflector. It is observed from the analysis results that the deployment process of the reflector with a fixed boundary experiences three stages. These stages are rapid deployment stage, slow deployment stage and impact stage. The insight of the force peak distributions of the reflector can help the optimization design of the structure.

Age Difference in Research Course Satisfaction in a Blended Ed.D. Program: A Moderated Mediation Model of the Effects of Internet Self-Efficacy and Statistics Anxiety

ERIC Educational Resources Information Center

Liu, Lu; Haque, M. D.

2017-01-01

This study identified the moderated mediation relationship among age, Internet self-efficacy, and statistics anxiety on student satisfaction after controlling for demographics and technology experiences in research methods courses in a blended professional doctoral program. One hundred and thirty-one students in a three-year Ed.D. Program…

The Principles of War Reconsidered

DTIC Science & Technology

2009-06-01

and technological innovation that affected all military capabilities” (Williamson Murray, “Armored Warfare,” W. Murray, A.R. Millet (Eds), Military...Richard M. Muller, “Close Air Support,” W. Murray, A.R. Millet (ed.), Military Innovation in the Interwar Period, Cambridge: University Press, 1996...dispersed battle-groups – making sharp ‘ finger -thrust’ … On the Russian Front the defensive 44 capacity of small mobile forces, distributed in battle

The Effect of Computer Games on the Proficiency of the B.Ed. Teacher Trainees in Using the Conventional Expressions in Conversations

ERIC Educational Resources Information Center

Muthiah, Rajendran

2015-01-01

The purpose of the study is to assess the effect of computer games on the proficiency of the B.Ed teacher trainees in using the conventional expressions in conversations. The role of technology in language learning has made outdated, drills, grammatical explanations and translation of texts, and the focus is shifted to communication based…

Technology readiness levels for advanced nuclear fuels and materials development

DOE PAGES

Carmack, W. J.; Braase, L. A.; Wigeland, R. A.; ...

2016-12-23

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. It was pioneered by the National Aeronautics and Space Administration (NASA) in the 1980s to develop and deploy new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications as well as the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is a critical technology needed for improving the performance and safety of currentmore » and advanced reactors, and ultimately closing the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management, communication and tracking tool. Furthermore, this article provides examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).« less

Technology readiness levels for advanced nuclear fuels and materials development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmack, W. J.; Braase, L. A.; Wigeland, R. A.

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. It was pioneered by the National Aeronautics and Space Administration (NASA) in the 1980s to develop and deploy new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications as well as the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is a critical technology needed for improving the performance and safety of currentmore » and advanced reactors, and ultimately closing the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management, communication and tracking tool. Furthermore, this article provides examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).« less

Performance-cost evaluation methodology for ITS equipment deployment

DOT National Transportation Integrated Search

2000-09-01

Although extensive Intelligent Transportation Systems (ITS) technology is being deployed in the field, little analysis is being performed to evaluate the benefits of implementation schemes. Benefit analysis is particularly in need for one popular ITS...

Use of incentives to encourage ITS deployment.

DOT National Transportation Integrated Search

2014-07-01

Moving Ahead for Progress in the 21st Century Act (MAP-21) identifies Intelligent Transportation Systems (ITS) as part of the solution to the Nations transportation needs and provides mechanisms for accelerating deployment of innovative technology...

Vulnerability mitigation : technology assessment and deployment

DOT National Transportation Integrated Search

2003-01-01

Because of the new terrorist threats since the September 11, 2001 attacks, rapid development, prototyping, and deployment of systems has been necessary. A well integrated physical security system that combines state of the art security and informatio...

Changing Family Roles-Across the Deployment Cycle

DTIC Science & Technology

2016-09-01

informant, longitudinal investigation of Army National Guard families’ experience of deployment project focuses on a) the negotiation and management of...focuses on a) the negotiation and management of family roles during deployment cycles, and b) on the impact of technology-based communication during...member. During reintegration, the service member and partner complete a series of brief telephone interviews regarding their negotiation about household

A Decision Support System for Managing a Diverse Portfolio of Technology Resources

NASA Technical Reports Server (NTRS)

Smith, J.

2000-01-01

This paper describes an automated decision support system designed to facilitate the management of a continuously changing portfolio of technologies as new technologies are deployed and older technologies are decommissioned.

Transforming the Classroom. Technology Counts, 2016. Education Week. Volume 35, Issue 35

ERIC Educational Resources Information Center

Edwards, Virginia B., Ed.

2016-01-01

The 2016 edition of "Education Week's" long-­running "Technology Counts" report combines in-depth reporting and insight from an original national survey to reveal teachers' confidence levels in ed tech, how teachers approach integrating technology into the classroom, and decision-making behind tech products. Contents include:…

An Evaluation of HigherEd 2.0 Technologies in Undergraduate Mechanical Engineering Courses

ERIC Educational Resources Information Center

Orange, Amy; Heinecke, Walter; Berger, Edward; Krousgrill, Charles; Mikic, Borjana; Quinn, Dane

2012-01-01

Between 2006 and 2010, sophomore engineering students at four universities were exposed to technologies designed to increase their learning in undergraduate engineering courses. Our findings suggest that students at all sites found the technologies integrated into their courses useful to their learning. Video solutions received the most positive…

Technology in College Unions and Student Activities: A Collection of Technology Resources from the ACUI Community

ERIC Educational Resources Information Center

Association of College Unions International (NJ1), 2012

2012-01-01

This publication presents a collection of technology resources from the Association of College Unions International (ACUI) community. Contents include: (1) Podcasting (Jeff Lail); (2) Video Podcasting (Ed Cabellon); (3) Building a Multimedia Production Center (Nathan Byrer); (4) Cloud Computing in the Student Union and Student Activities (TJ…

Reconciling Biodiversity Conservation and Widespread Deployment of Renewable Energy Technologies in the UK

PubMed Central

Gove, Benedict; Williams, Leah J.; Beresford, Alison E.; Roddis, Philippa; Campbell, Colin; Teuten, Emma; Langston, Rowena H. W.; Bradbury, Richard B.

2016-01-01

Renewable energy will potentially make an important contribution towards the dual aims of meeting carbon emission reduction targets and future energy demand. However, some technologies have considerable potential to impact on the biodiversity of the environments in which they are placed. In this study, an assessment was undertaken of the realistic deployment potential of a range of renewable energy technologies in the UK, considering constraints imposed by biodiversity conservation priorities. We focused on those energy sources that have the potential to make important energy contributions but which might conflict with biodiversity conservation objectives. These included field-scale solar, bioenergy crops, wind energy (both onshore and offshore), wave and tidal stream energy. The spatially-explicit analysis considered the potential opportunity available for each technology, at various levels of ecological risk. The resultant maps highlight the energy resource available, physical and policy constraints to deployment, and ecological sensitivity (based on the distribution of protected areas and sensitive species). If the technologies are restricted to areas which currently appear not to have significant ecological constraints, the total potential energy output from these energy sources was estimated to be in the region of 5,547 TWh/yr. This would be sufficient to meet projected energy demand in the UK, and help to achieve carbon reduction targets. However, we highlight two important caveats. First, further ecological monitoring and surveillance is required to improve understanding of wildlife distributions and therefore potential impacts of utilising these energy sources. This is likely to reduce the total energy available, especially at sea. Second, some of the technologies under investigation are currently not deployed commercially. Consequently this potential energy will only be available if continued effort is put into developing these energy sources/technologies, to enable realisation of their full potential. PMID:27224050

Reconciling Biodiversity Conservation and Widespread Deployment of Renewable Energy Technologies in the UK.

PubMed

Gove, Benedict; Williams, Leah J; Beresford, Alison E; Roddis, Philippa; Campbell, Colin; Teuten, Emma; Langston, Rowena H W; Bradbury, Richard B

2016-01-01

Renewable energy will potentially make an important contribution towards the dual aims of meeting carbon emission reduction targets and future energy demand. However, some technologies have considerable potential to impact on the biodiversity of the environments in which they are placed. In this study, an assessment was undertaken of the realistic deployment potential of a range of renewable energy technologies in the UK, considering constraints imposed by biodiversity conservation priorities. We focused on those energy sources that have the potential to make important energy contributions but which might conflict with biodiversity conservation objectives. These included field-scale solar, bioenergy crops, wind energy (both onshore and offshore), wave and tidal stream energy. The spatially-explicit analysis considered the potential opportunity available for each technology, at various levels of ecological risk. The resultant maps highlight the energy resource available, physical and policy constraints to deployment, and ecological sensitivity (based on the distribution of protected areas and sensitive species). If the technologies are restricted to areas which currently appear not to have significant ecological constraints, the total potential energy output from these energy sources was estimated to be in the region of 5,547 TWh/yr. This would be sufficient to meet projected energy demand in the UK, and help to achieve carbon reduction targets. However, we highlight two important caveats. First, further ecological monitoring and surveillance is required to improve understanding of wildlife distributions and therefore potential impacts of utilising these energy sources. This is likely to reduce the total energy available, especially at sea. Second, some of the technologies under investigation are currently not deployed commercially. Consequently this potential energy will only be available if continued effort is put into developing these energy sources/technologies, to enable realisation of their full potential.

An analysis of casualties presenting to military emergency departments in Iraq and Afghanistan.

PubMed

Schauer, Steven G; Naylor, Jason F; Oliver, Joshua J; Maddry, Joseph K; April, Michael D

2018-05-02

During the past 17 years of conflict the deployed US military health care system has found new and innovative ways to reduce combat mortality down to the lowest case fatality rate in US history. There is currently a data dearth of emergency department (ED) care delivered in this setting. We seek to describe ED interventions in this setting. We used a series of ED procedure codes to identify subjects within the Department of Defense Trauma Registry from January 2007 to August 2016. During this time, 28,222 met inclusion criteria. The median age of causalities in this dataset was 25 years and most (96.9%) were male, US military (41.3%), and part of Operation Enduring Freedom (66.9%). The majority survived to hospital discharge (95.5%). Most subjects sustained injuries by explosives (55.3%) and gunshot wound (GSW). The majority of subjects had an injury severity score that was considered minor (74.1%), while the preponderance of critically injured casualties sustained injuries by explosive (0.7%). Based on AIS, the most frequently seriously injured body region was the extremities (23.9%). The bulk of administered blood products were packed red blood cells (PRBC, 26.4%). Endotracheal intubation was the most commonly performed critical procedure (11.9%). X-ray (79.9%) was the most frequently performed imaging study. US military personnel comprised the largest proportion of combat casualties and most were injured by explosive. Within this dataset, ED providers most frequently performed endotracheal intubation, administered blood products, and obtained diagnostic imaging studies. Published by Elsevier Inc.

A Revolute Joint With Linear Load-Displacement Response for Precision Deployable Structures

NASA Technical Reports Server (NTRS)

Lake, Mark S.; Warren, Peter A.; Peterson, Lee D.

1996-01-01

NASA Langley Research center is developing key structures and mechanisms technologies for micron-accuracy, in-space deployment of future space instruments. Achieving micron-accuracy deployment requires significant advancements in deployment mechanism design such as the revolute joint presented herein. The joint presented herein exhibits a load-cycling response that is essentially linear with less than two percent hysteresis, and the joint rotates with less than one in.-oz. of resistance. A prototype reflector metering truss incorporating the joint exhibits only a few microns of kinematic error under repeated deployment and impulse loading. No other mechanically deployable structure found in literature has been demonstrated to be this kinematically accurate.

Expanding the role of the nurse practitioner in the deployed setting.

PubMed

Dargis, Julie; Horne, Theresa; Tillman-Ortiz, Sophie; Scherr, Diane; Yackel, Edward E

2006-08-01

Today's military is experiencing rapid advances in technology and in manpower utilization. The Army Medical Department is redesigning the structure and function of deployable hospital systems as part of this effort. The transformation of deployable hospital systems requires that a critical analysis of manpower utilization be undertaken to optimize the employment of soldier-medics. The objective of this article was to describe the use of nurse practitioners as primary care providers during deployment. The lived experiences of five nurse practitioners deployed to Operation Iraqi Freedom are presented. Data gathered during the deployment and an analysis of the literature clearly support expanded and legitimized roles for these health care professionals in future conflicts and peacekeeping operations.

Development of deployable structures for large space platform systems, part 1

NASA Technical Reports Server (NTRS)

Cox, R. L.; Nelson, R. A.

1982-01-01

Eight deployable platform design objectives were established: autodeploy/retract; fully integrated utilities; configuration variability; versatile payload and subsystem interfaces; structural and packing efficiency; 1986 technology readiness; minimum EVA/RMS; and Shuttle operational compatibility.

Private sector deployment of intelligent transportation systems : current status and trends

DOT National Transportation Integrated Search

2006-02-01

This report summarizes the current state of deployment of Intelligent Transportation Systems and related technologies by the private sector in the United States. Coverage is focused primarily on in-vehicle entertainment, information and communication...

State fiscal implications of intelligent transportation systems/commercial vehicle operations deployment

DOT National Transportation Integrated Search

1998-01-01

As states begin to consider full-scale deployment of intelligent transportation system (ITS) technologies to support commercial vehicle operations (CVO), Governors and state legislatures will need answers to the following questions: (1) What savings ...

Early Deployment Of Atms/Atis For Metropolitan Detroit, Final Report

DOT National Transportation Integrated Search

1994-09-26

TECHNOLOGY, ARCHITECTURE, CONTRACTING, AND DEPLOYMENT RECOMMENDATIONS RESULTING FROM THE STUDY ENABLE MDOT TO BEGIN SYSTEM DESIGN AND CONSTRUCTION. HOWEVER, IN ORDER TO DEMONSTRATE THE IMPLEMENTATION METHODS OF NEW ATMS/ATIS COMPONENTS AND SYSTEM ARC...

Sandia National Laboratories: National Security Missions: International

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Licensing & Technology Transfer Browse Technology Portfolios Technology Partnerships Business, Industry

Sandia National Laboratories: Microsystems Science & Technology Center

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia Enabled Communications and

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Licensing & Technology Transfer Browse Technology Portfolios Technology Partnerships Business, Industry

Erectile dysfunction treatment and traditional medicine—can East and West medicine coexist?

PubMed Central

Lee, Joe K. C.; Tan, Ronny B. W.

2017-01-01

Erectile dysfunction (ED) is a common sexual problem affecting many men irrespective of cultures, beliefs and nationalities. While medical therapy for ED has been revolutionized by the advent of oral phosphodiesterase type 5 inhibitors and intracavernosal injection of vasoactive agents, recent technological advances such stem cell therapy, low intensity shock wave and newer generation of penile prosthesis implant offer hope to men who do not respond to conventional medical therapy. In contrast, traditional and complementary medicine (TCM) focuses on the restoration and better overall bodily regulation with the use of various herbal and animal products as well as exercises to invigorate qi (energy) in vital organs. Western medicine involves an analysis of ED symptom and underlying causes that contribute to ED, while TCM emphases the concept of holism and harmonization of body organs to achieve natural sexual life. The following article reviews our current understanding regarding the philosophical approach, and evaluates the evidence surrounding various ED therapies between mainstream Western Medicine and TCM. PMID:28217454

Erectile dysfunction treatment and traditional medicine-can East and West medicine coexist?

PubMed

Lee, Joe K C; Tan, Ronny B W; Chung, Eric

2017-02-01

Erectile dysfunction (ED) is a common sexual problem affecting many men irrespective of cultures, beliefs and nationalities. While medical therapy for ED has been revolutionized by the advent of oral phosphodiesterase type 5 inhibitors and intracavernosal injection of vasoactive agents, recent technological advances such stem cell therapy, low intensity shock wave and newer generation of penile prosthesis implant offer hope to men who do not respond to conventional medical therapy. In contrast, traditional and complementary medicine (TCM) focuses on the restoration and better overall bodily regulation with the use of various herbal and animal products as well as exercises to invigorate qi (energy) in vital organs. Western medicine involves an analysis of ED symptom and underlying causes that contribute to ED, while TCM emphases the concept of holism and harmonization of body organs to achieve natural sexual life. The following article reviews our current understanding regarding the philosophical approach, and evaluates the evidence surrounding various ED therapies between mainstream Western Medicine and TCM.

Emergency Medicine: On the Frontlines of Medical Education Transformation.

PubMed

Holmboe, Eric S

2015-11-01

Emergency medicine (EM) has always been on the frontlines of healthcare in the United States. I experienced this reality first hand as a young general medical officer assigned to an emergency department (ED) in a small naval hospital in the 1980s. For decades the ED has been the only site where patients could not be legally denied care. Despite increased insurance coverage for millions of Americans as a result of the Affordable Care Act, ED directors report an increase in patient volumes in a recent survey.1 EDs care for patients from across the socioeconomic spectrum suffering from a wide range of clinical conditions. As a result, the ED is still one of few components of the American healthcare system where social justice is enacted on a regular basis. Constant turbulence in the healthcare system, major changes in healthcare delivery, technological advances and shifting demographic trends necessitate that EM constantly adapt and evolve as a discipline in this complex environment.

Taking it to the streets: delivering on deployment.

PubMed

Carr, Dafna; Welch, Vickie; Fabik, Trish; Hirji, Nadir; O'Connor, Casey

2009-01-01

From inception to deployment, the Wait Time Information System (WTIS) project faced significant challenges associated with time, scope and complexity. It involved not only the creation and deployment of two large-scale province-wide systems (the WTIS and Ontario's Client Registry/Enterprise Master Patient Index) within aggressive time frames, but also the active engagement of 82 Ontario hospitals, scores of healthcare leaders and several thousand clinicians who would eventually be using the new technology and its data. The provincial WTIS project team (see Figure 1) also had to be able to adapt and evolve their planning in an environment that was changing day-by-day. This article looks at the factors that allowed the team to take the WTIS out to the field and shares the approach, processes and tools used to deploy this complex and ambitious information management and information technology (IM/IT) initiative.

Development of a Deployable Nonmetallic Boom for Reconfigurable Systems of Small Spacecraft

NASA Technical Reports Server (NTRS)

Rehnmark, Fredrik; Pryor, Mark; Holmes, Buck; Schaechter, David; Pedreiro, Nelson; Carrington, Connie

2007-01-01

In 2005, NASA commenced Phase 1 of the Modular Reconfigurable High Energy Technology Demonstrator (MRHE) program to investigate reconfigurable systems of small spacecraft. During that year, Lockheed Martin's Advanced Technology Center (ATC) led an accelerated effort to develop a 1-g MRHE concept demonstration featuring robotic spacecraft simulators equipped with docking mechanisms and deployable booms. The deployable boom built for MRHE was the result of a joint effort in which ATK was primarily responsible for developing and fabricating the Collapsible Rollable Tube (CRT patent pending) boom while Lockheed Martin designed and built the motorized Boom Deployment Mechanism (BDM) under a concurrent but separate IR&D program. Tight coordination was necessary to meet testbed integration and functionality requirements. This paper provides an overview of the CRT boom and BDM designs and presents preliminary results of integration and testing to support the MRHE demonstration.

Structural Bus and Release Mechanisms on the ST5 Satellites: Summary and Status

NASA Technical Reports Server (NTRS)

Rossoni, Peter

2007-01-01

The Space Technology 5 Mechanical System met the challenge of packaging a fully functional science and technology satellite system with its Deployer mechanism into a compact 0.07cu m volume. Three 25 kg satellites were orbited in constellation in March, 2006. The ST5 mechanical system is composed of 1) The Structural Bus; 2) Magnetometer Instrument Boom 3) Spacecraft Deployer Release Mechanism This system includes a highly integrated electronics enclosure as a multifunctional structure; a lightweight, magnetically clean Magnetometer Boom; the first use of Nitinol Shape-Memory Alloy trigger devices for deploying multiple spacecraft; an innovative compliant mount for the umbilical connector and a Deployer mechanism that imparts both separation velocity and mission spin rate to three constellation flying satellites These elements employed cutting-edge design and analysis tools, state-of-the-art testing facilities and proven engineering techniques to meet stringent performance criteria, enabling the mission s success.

Demonstrations of Deployable Systems for Robotic Precursor Missions

NASA Technical Reports Server (NTRS)

Dervan, J.; Johnson, L.; Lockett, T.; Carr, J.; Boyd, D.

2017-01-01

NASA is developing thin-film based, deployable propulsion, power, and communication systems for small spacecraft that serve as enabling technologies for exploration of the solar system. By leveraging recent advancements in thin films, photovoltaics, deployment systems, and miniaturized electronics, new mission-level capabilities will be demonstrated aboard small spacecraft enabling a new generation of frequent, inexpensive, and highly capable robotic precursor missions with goals extensible to future human exploration. Specifically, thin-film technologies are allowing the development and use of solar sails for propulsion, small, lightweight photovoltaics for power, and omnidirectional antennas for communication as demonstrated by recent advances on the Near Earth Asteroid (NEA) Scout and Lightweight Integrated Solar Array and anTenna (LISA-T) projects.

Binaural Beat Technology: A Complementary Path to Post Deployment Wellness

DTIC Science & Technology

2017-03-16

for at least three consecutive nights per week, for four weeks. A 20-minute pre and post -intervention heartrate variability (HRV) stress test and...four weeks. A 20-minute pre and post -intervention heartrate variability (HRV) stress test and daily perceived stress assessed intervention efficacy...DATES COVERED (Jul 7 2012 – Dec 31 2016) Binaural Beat Technology: A Complementary Path to Post Deployment Wellness 5a. CONTRACT NUMBER N/A 5b

Improvement of the System of Training of Specialists by University for Coal Mining Enterprises

NASA Astrophysics Data System (ADS)

Mikhalchenko, Vadim; Seredkina, Irina

2017-11-01

In the article the ingenious technique of the Quality Function Deployment with reference to the process of training of specialists with higher education by university is considered. The method is based on the step-by-step conversion of customer requirements into specific organizational, meaningful and functional transformations of the technological process of the university. A fully deployed quality function includes four stages of tracking customer requirements while creating a product: product planning and design, process design, production design. The Quality Function Deployment can be considered as one of the methods for optimizing the technological processes of training of specialists with higher education in the current economic conditions. Implemented at the initial stages of the life cycle of the technological process, it ensures not only the high quality of the "product" of graduate school, but also the fullest possible satisfaction of consumer's requests and expectations.

Digital Pills to Measure Opioid Ingestion Patterns in Emergency Department Patients With Acute Fracture Pain: A Pilot Study.

PubMed

Chai, Peter R; Carreiro, Stephanie; Innes, Brendan J; Rosen, Rochelle K; O'Cleirigh, Conall; Mayer, Kenneth H; Boyer, Edward W

2017-01-13

Nonadherence to prescribed regimens for opioid analgesic agents contributes to increasing opioid abuse and overdose death. Opioids are frequently prescribed on an as-needed basis, placing the responsibility to determine opioid dose and frequency with the patient. There is wide variability in physician prescribing patterns because of the lack of data describing how patients actually use as-needed opioid analgesics. Digital pill systems have a radiofrequency emitter that directly measures medication ingestion events, and they provide an opportunity to discover the dose, timing, and duration of opioid therapy. The purpose of this study was to determine the feasibility of a novel digital pill system to measure as-needed opioid ingestion patterns in patients discharged from the emergency department (ED) after an acute bony fracture. We used a digital pill with individuals who presented to a teaching hospital ED with an acute extremity fracture. The digital pill consisted of a digital radiofrequency emitter within a standard gelatin capsule that encapsulated an oxycodone tablet. When ingested, the gastric chloride ion gradient activated the digital pill, transmitting a radiofrequency signal that was received by a hip-worn receiver, which then transmitted the ingestion data to a cloud-based server. After a brief, hands-on training session in the ED, study participants were discharged home and used the digital pill system to ingest oxycodone prescribed as needed for pain for one week. We conducted pill counts to verify digital pill data and open-ended interviews with participants at their follow-up appointment with orthopedics or at one week after enrollment in the study to determine the knowledge, attitudes, beliefs, and practices regarding digital pills. We analyzed open-ended interviews using applied thematic analysis. We recruited 10 study participants and recorded 96 ingestion events (87.3%, 96/110 accuracy). Study participants reported being able to operate all aspects of the digital pill system after their training. Two participants stopped using the digital pill, reporting they were in too much pain to focus on the novel technology. The digital pill system detected multiple simultaneous ingestion events by the digital pill system. Participants ingested a mean 8 (SD 5) digital pills during the study period and four participants continued on opioids at the end of the study period. After interacting with the digital pill system in the real world, participants found the system highly acceptable (80%, 8/10) and reported a willingness to continue to use a digital pill to improve medication adherence monitoring (90%, 9/10). The digital pill is a feasible method to measure real-time opioid ingestion patterns in individuals with acute pain and to develop real-time interventions if opioid abuse is detected. Deploying digital pills is possible through the ED with a short instructional course. Patients who used the digital pill accepted the technology. ©Peter R Chai, Stephanie Carreiro, Brendan J Innes, Rochelle K Rosen, Conall O'Cleirigh, Kenneth H Mayer, Edward W Boyer. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 13.01.2017.

California Clean Tech

EPA Pesticide Factsheets

The California Clean Air Technology Initiative is a partnership to develop clean air technologies for the San Joaquin Valley and South Coast Air Basins through collaborative projects in technology research, development, demonstration, and deployment.

Chasing Woozles? A Personal Reflection on a Quarter-Century in Ed Tech, and an Attempt to Peer Ahead through the Fog

ERIC Educational Resources Information Center

Bergeron, Corrie

2014-01-01

While it's easy to get caught up in the frenetic drive to do the Next Big New Thing in educational technology, it's helpful to remember that a lot of important things "don't" change. But, today, we face almost constant change, and that has serious implications for education and ed-tech professionals. This article looks back at where…

Sandia National Laboratories: News

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Locations

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Careers

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Mission

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories:

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Feedback

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Electrodialytic 2-compartment cells for emerging organic contaminants removal from effluent.

PubMed

Ferreira, Ana Rita; Couto, Nazaré; Guedes, Paula; Pinto, Joana; Mateus, Eduardo P; Ribeiro, Alexandra B

2018-04-27

The present work discusses the efficiency of the electrodialytic (ED) process to remove emerging organic contaminants (EOCs) from effluent. The ED process was carried out in a cell of two-compartments (2 C-cell) with effluent in either the anode or cathode compartment, separated from the electrolyte compartment through an anion or a cation exchange membrane (AEM and CEM, respectively). As effluent destination might be soil irrigation, and having in mind the nutrient recycling, phosphorus was also monitored in the process. The ED removals showed to be dependent of EOCs characteristics and cell design. Removals were higher when using an AEM (60-72%) than a CEM (8-63%), except for caffeine when the effluent was placed in the cathode, that did not show any removal. When using an AEM with the effluent placed in the anode compartment, all the EOCs (including caffeine) were removed between 57-72%, mainly through electrodegradation phenomena. Regarding phosphorus, a polarity switch may be done to a 2 C-cell with a AEM, depending on the effluent final use. This technology is still in its first steps and, in both cases, further optimization of ED parameters is needed. Still, this technological innovation and cross-cutting research envisages the promotion of economic, social and environmental benefits. Copyright © 2018 Elsevier B.V. All rights reserved.

Neuroprotective and Nerve Regenerative Approaches for Treatment of Erectile Dysfunction after Cavernous Nerve Injury

PubMed Central

Campbell, Jeffrey D.; Burnett, Arthur L.

2017-01-01

Erectile dysfunction (ED) is a significant cause of reduced quality of life in men and their partners. Cavernous nerve injury (CNI) during pelvic surgery results in ED in greater than 50% of patients, regardless of additional patient factors. ED related to CNI is difficult to treat and typically poorly responsive to first- and second-line therapeutic options. Recently, a significant amount of research has been devoted to exploring neuroprotective and neuroregenerative approaches to salvage erectile function in patients with CNI. In addition, therapeutic options such as neuregulins, immunophilin ligands, gene therapy, stem cell therapy and novel surgical strategies, have shown benefit in pre-clinical, and limited clinical studies. In the era of personalized medicine, these new therapeutic technologies will be the future of ED treatment and are described in this review. PMID:28820434

Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trattner, Sigal; Cheng, Bin; Pieniazek, Radoslaw L.

2014-04-15

Purpose: Effective dose (ED) is a widely used metric for comparing ionizing radiation burden between different imaging modalities, scanners, and scan protocols. In computed tomography (CT), ED can be estimated by performing scans on an anthropomorphic phantom in which metal-oxide-semiconductor field-effect transistor (MOSFET) solid-state dosimeters have been placed to enable organ dose measurements. Here a statistical framework is established to determine the sample size (number of scans) needed for estimating ED to a desired precision and confidence, for a particular scanner and scan protocol, subject to practical limitations. Methods: The statistical scheme involves solving equations which minimize the sample sizemore » required for estimating ED to desired precision and confidence. It is subject to a constrained variation of the estimated ED and solved using the Lagrange multiplier method. The scheme incorporates measurement variation introduced both by MOSFET calibration, and by variation in MOSFET readings between repeated CT scans. Sample size requirements are illustrated on cardiac, chest, and abdomen–pelvis CT scans performed on a 320-row scanner and chest CT performed on a 16-row scanner. Results: Sample sizes for estimating ED vary considerably between scanners and protocols. Sample size increases as the required precision or confidence is higher and also as the anticipated ED is lower. For example, for a helical chest protocol, for 95% confidence and 5% precision for the ED, 30 measurements are required on the 320-row scanner and 11 on the 16-row scanner when the anticipated ED is 4 mSv; these sample sizes are 5 and 2, respectively, when the anticipated ED is 10 mSv. Conclusions: Applying the suggested scheme, it was found that even at modest sample sizes, it is feasible to estimate ED with high precision and a high degree of confidence. As CT technology develops enabling ED to be lowered, more MOSFET measurements are needed to estimate ED with the same precision and confidence.« less

Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry

PubMed Central

Trattner, Sigal; Cheng, Bin; Pieniazek, Radoslaw L.; Hoffmann, Udo; Douglas, Pamela S.; Einstein, Andrew J.

2014-01-01

Purpose: Effective dose (ED) is a widely used metric for comparing ionizing radiation burden between different imaging modalities, scanners, and scan protocols. In computed tomography (CT), ED can be estimated by performing scans on an anthropomorphic phantom in which metal-oxide-semiconductor field-effect transistor (MOSFET) solid-state dosimeters have been placed to enable organ dose measurements. Here a statistical framework is established to determine the sample size (number of scans) needed for estimating ED to a desired precision and confidence, for a particular scanner and scan protocol, subject to practical limitations. Methods: The statistical scheme involves solving equations which minimize the sample size required for estimating ED to desired precision and confidence. It is subject to a constrained variation of the estimated ED and solved using the Lagrange multiplier method. The scheme incorporates measurement variation introduced both by MOSFET calibration, and by variation in MOSFET readings between repeated CT scans. Sample size requirements are illustrated on cardiac, chest, and abdomen–pelvis CT scans performed on a 320-row scanner and chest CT performed on a 16-row scanner. Results: Sample sizes for estimating ED vary considerably between scanners and protocols. Sample size increases as the required precision or confidence is higher and also as the anticipated ED is lower. For example, for a helical chest protocol, for 95% confidence and 5% precision for the ED, 30 measurements are required on the 320-row scanner and 11 on the 16-row scanner when the anticipated ED is 4 mSv; these sample sizes are 5 and 2, respectively, when the anticipated ED is 10 mSv. Conclusions: Applying the suggested scheme, it was found that even at modest sample sizes, it is feasible to estimate ED with high precision and a high degree of confidence. As CT technology develops enabling ED to be lowered, more MOSFET measurements are needed to estimate ED with the same precision and confidence. PMID:24694150

Outlooks for Wind Power in the United States: Drivers and Trends under a 2016 Policy Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mai, Trieu; Lantz, Eric; Ho, Jonathan

Over the past decade, wind power has become one of the fastest growing electricity generation sources in the United States. Despite this growth, the U.S. wind industry continues to experience year-to-year fluctuations across the manufacturing and supply chain as a result of dynamic market conditions and changing policy landscapes. Moreover, with advancing wind technologies, ever-changing fossil fuel prices, and evolving energy policies, the long-term future for wind power is highly uncertain. In this report, we present multiple outlooks for wind power in the United States, to explore the possibilities of future wind deployment. The future wind power outlooks presented relymore » on high-resolution wind resource data and advanced electric sector modeling capabilities to evaluate an array of potential scenarios of the U.S. electricity system. Scenario analysis is used to explore drivers, trends, and implications for wind power deployment over multiple periods through 2050. Specifically, we model 16 scenarios of wind deployment in the contiguous United States. These scenarios span a wide range of wind technology costs, natural gas prices, and future transmission expansion. We identify conditions with more consistent wind deployment after the production tax credit expires as well as drivers for more robust wind growth in the long run. Conversely, we highlight challenges to future wind deployment. We find that the degree to which wind technology costs decline can play an important role in future wind deployment, electric sector CO 2 emissions, and lowering allowance prices for the Clean Power Plan.« less

Injury risk for matched front and rear seat car passengers by injury severity and crash type: An exploratory study.

PubMed

Mitchell, R J; Bambach, M R; Toson, Barbara

2015-09-01

The risk of serious injury or death has been found to be reduced for some front compared to rear seat car passengers in newer vehicles. However, differences in injury severity between car occupants by seating position has not been examined. This study examines the injury severity risk for rear compared to front seat car passengers. A retrospective matched-cohort analysis was conducted of vehicle crashes involving injured rear vs front seat car passengers identified in linked police-reported, hospitalisation and emergency department (ED) presentation records during 2001-2011 in New South Wales (NSW), Australia. Odds ratios were estimated using an ordinal logistic mixed model and logistic mixed models. There were 5419 front and 4588 rear seat passengers in 3681 vehicles. There was a higher odds of sustaining a higher injury severity as a rear-compared to a front seat car passenger, with a higher odds of rear seat passengers sustaining serious injuries compared to minimal injuries. Where the vehicle occupant was older, travelling in a vehicle manufactured between 1990 and 1996 or after 1997, where the airbag deployed, and where the vehicle was driven where the speed limit was ≥70km/h there was a higher odds of the rear passenger sustaining a higher injury severity then a front seated occupant. Rear seat car passengers are sustaining injuries of a higher severity compared to front seat passengers travelling in the same vehicle, as well as when travelling in newer vehicles and where the front seat occupant is shielded by an airbag deployed in the crash. Rear seat occupant protective mechanisms should be examined. Pre-hospital trauma management policies could influence whether an individual is transported to a hospital ED, thus it would be beneficial to have an objective measure of injury severity routinely available in ED records. Further examination of injury severity between rear and front seat passengers is warranted to examine less severe non-fatal injuries by car seating position and vehicle intrusion. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Boston Marathon Bombings Mass Casualty Incident: One Emergency Department's Information Systems Challenges and Opportunities.

PubMed

Landman, Adam; Teich, Jonathan M; Pruitt, Peter; Moore, Samantha E; Theriault, Jennifer; Dorisca, Elizabeth; Harris, Sheila; Crim, Heidi; Lurie, Nicole; Goralnick, Eric

2015-07-01

Emergency department (ED) information systems are designed to support efficient and safe emergency care. These same systems often play a critical role in disasters to facilitate real-time situation awareness, information management, and communication. In this article, we describe one ED's experiences with ED information systems during the April 2013 Boston Marathon bombings. During postevent debriefings, staff shared that our ED information systems and workflow did not optimally support this incident; we found challenges with our unidentified patient naming convention, real-time situational awareness of patient location, and documentation of assessments, orders, and procedures. As a result, before our next mass gathering event, we changed our unidentified patient naming convention to more clearly distinguish multiple, simultaneous, unidentified patients. We also made changes to the disaster registration workflow and enhanced roles and responsibilities for updating electronic systems. Health systems should conduct disaster drills using their ED information systems to identify inefficiencies before an actual incident. ED information systems may require enhancements to better support disasters. Newer technologies, such as radiofrequency identification, could further improve disaster information management and communication but require careful evaluation and implementation into daily ED workflow. Copyright © 2014 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

New Generator Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nielsen, Roy S.

2015-02-17

New generator technology project is driven by the need to be able to remotely deploy generator technology where it is needed, when it is needed. Both the military and aid programs that provide assistance after disasters could use the ability to deploy energy generation that fits the needs of the situation. Currently, pre-specified generators are deployed, sometime more than half way around the world to provide electricity. Through our Phase-I to Phase III DARPA grant, we will provide a mechanism where a 3d print station and raw materials could be shipped to a deployment site and remotely deployed personnel. Thesemore » remote personnel can collaborate with engineers at a home location where 3d print plans can be optimized for the remote purpose. The plans can then be sent electronically to the remote location for printing, much like NASA sent the plans for a socket wrench to the International Space Station for printing in . If multiple generators need to be deployed at different remote locations, within miles of each other the printer rig can be moved to print the generators where they are needed. 3d printing is growing in the field of manufacturing. 3d printing has matured to the point where many types of materials are now available for many types of manufacturing. Both magnetic and electrically conductive material materials have recently been developed which can now lead to 3d printing of engines and generators. Our project will provide a successful printer rig that can be remotely deployed, to print a generator design in the field as well as provide a process for deploying the printed generator as well. This Systems Engineering Management Plan(SEMP) will provide the planning required for a Phase I DARPA grant that may also include goals for Phase II and Phase II grants. The SEMP provides a proposed project schedule, references, system engineering processes, specialty engineering system deployment and product support sections. Each section will state how our company will provide the necessary services to make this project succeed.« less

A Modular Approach To Developing A Large Deployable Reflector

NASA Astrophysics Data System (ADS)

Pittman, R.; Leidich, C.; Mascy, F.; Swenson, B.

1984-01-01

NASA is currently studying the feasibility of developing a Large Deployable Reflector (LDR) astronomical facility to perform astrophysical studies of the infrared and submillimeter portion of the spectrum in the mid 1990's. The LDR concept was recommended by the Astronomy Survey Committee of the National Academy of Sciences as one of two space based projects to be started this decade. The current baseline calls for a 20 m (65.6 ft) aperture telescope diffraction limited at 30 μm and automatically deployed from a single Shuttle launch. The volume, performance, and single launch constraints place great demands on the technology and place LDR beyond the state-of-the-art in certain areas such as lightweight reflector segments. The advent of the Shuttle is opening up many new options and capabilities for producing large space systems. Until now, LDR has always been conceived as an integrated system, deployed autonomously in a single launch. This paper will look at a combination of automatic deployment and on-orbit assembly that may reduce the technological complexity and cost of the LDR system. Many technological tools are now in use or under study that will greatly enhance our capabilities to do assembly in space. Two Shuttle volume budget scenarios will be examined to assess the potential of these tools to reduce the LDR system complexity. Further study will be required to reach the full optimal combination of deployment and assembly, since in most cases the capabilities of these new tools have not been demonstrated. In order to take maximum advantage of these concepts, the design of LDR must be flexible and allow one subsystem to be modified without adversely affecting the entire system. One method of achieving this flexibility is to use a modular design approach in which the major subsystems are physically separated during launch and assembled on orbit. A modular design approach facilitates this flexibility but requires that the subsystems be interfaced in a simple, straightforward, and controlled manner. NASA is currently defining a technology development plan for LDR which will identify the technology advances that are required. The modular approach offers the flexibility to easily incorporate these new advances into the design.

Remote patient management: technology-enabled innovation and evolving business models for chronic disease care.

PubMed

Coye, Molly Joel; Haselkorn, Ateret; DeMello, Steven

2009-01-01

Remote patient management (RPM) is a transformative technology that improves chronic care management while reducing net spending for chronic disease. Broadly deployed within the Veterans Health Administration and in many small trials elsewhere, RPM has been shown to support patient self-management, shift responsibilities to non-clinical providers, and reduce the use of emergency department and hospital services. Because transformative technologies offer major opportunities to advance national goals of improved quality and efficiency in health care, it is important to understand their evolution, the experiences of early adopters, and the business models that may support their deployment.

The 17th Aerospace Mechanisms Symposium

NASA Technical Reports Server (NTRS)

1983-01-01

The proceedings of the Aerospace Mechanisms Symposium are reported. Technological areas covered include space lubrication, aerodynamic devices, spacecraft/Shuttle latches, deployment, positioning, and pointing. Devices for spacecraft tether, magnetic bearing suspension, explosive welding, and a deployable/retractable mast are also described.

Deploying weigh-in-motion installations on asphalt concrete pavements.

DOT National Transportation Integrated Search

2010-02-01

The strategic plan for establishing a vehicle weight monitoring net across Texas calls for deploying two : technology types piezoelectric and bending plate systems, and seeks to install weigh-in-motion (WIM) : systems in roadways that are under n...

Evolving Frameworks for Different Communities of Scientists and End Users

NASA Astrophysics Data System (ADS)

Graves, S. J.; Keiser, K.

2016-12-01

Two evolving frameworks for interdisciplinary science will be described in the context of the Common Data Framework for Earth-Observation Data and the importance of standards and protocols. The Event Data Driven Delivery (ED3) Framework, funded by NASA Applied Sciences, provides the delivery of data based on predetermined subscriptions and associated workflows to various communities of end users. ED3's capabilities are used by scientists, as well as policy and resource managers, when event alerts are triggered to respond to their needs. The EarthCube Integration and Testing Environment (ECITE) Assessment Framework for Technology Interoperability and Integration is being developed to facilitate the EarthCube community's assessment of NSF funded technologies addressing Earth science problems. ECITE is addressing the translation of geoscience researchers' use cases into technology use case that apply EarthCube-funded building block technologies (and other existing technologies) for solving science problems. EarthCube criteria for technology assessment include the use of data, metadata and service standards to improve interoperability and integration across program components. The long-range benefit will be the growth of a cyberinfrastructure with technology components that have been shown to work together to solve known science objectives.

Learning Technologies: Prospects and Pathways. Selected papers from EdTech '96 Biennial Conference of the Australian Society for Educational Technology (Melbourne, Australia, July 7-10, 1996).

ERIC Educational Resources Information Center

Hedberg, John G., Ed.; And Others

This book presents a series of conference papers dealing with educational technology. The papers are: "The Role of Educational Technology in Upgrading Teacher Education in Pakistan" (M. Hashim Abbasi and Alex C. Millar); "Report on the Teaching and Learning on the Internet Project--RMIT TAFE" (Laurie Armstrong); "A…

Using the Theory of Habitus to Move beyond the Study of Barriers to Technology Integration

ERIC Educational Resources Information Center

Belland, Brian R.

2009-01-01

The integration of technology by K-12 teachers was promoted to aid the shift to a more student-centered classroom (e.g., Roblyer, M. D., & Edwards, J. (2000). "Integrating educational technology into teaching" (2nd ed.). Upper Saddle River, NJ: Merrill). However, growth in the power of and access to technology in schools has not been accompanied…

Ground Deployment Demonstration and Material Testing for Solar Sail

NASA Astrophysics Data System (ADS)

Huang, Xiaoqi; Cheng, Zhengai; Liu, Yufei; Wang, Li

2016-07-01

Solar Sail is a kind of spacecraft that can achieve extremely high velocity by light pressure instead of chemical fuel. The great accelerate rely on its high area-to-mass ratio. So solar sail is always designed in huge size and it use ultra thin and light weight materials. For 100-meter class solar sail, two key points must be considered in the design process. They are fold-deployment method, and material property change in space environment. To test and verify the fold-deployment technology, a 8*8m principle prototype was developed. Sail membrane folding in method of IKAROS, Nanosail-D , and new proposed L-shape folding pattern were tested on this prototype. Their deployment properties were investigated in detail, and comparisons were made between them. Also, the space environment suitability of ultra thin polyimide films as candidate solar sail material was analyzed. The preliminary test results showed that membrane by all the folding method could deploy well. Moreover, sail membrane folding by L-shape pattern deployed more rapidly and more organized among the three folding pattern tested. The mechanical properties of the polyimide had no significant change after electron irradiation. As the preliminary research on the key technology of solar sail spacecraft, in this paper, the results of the study would provide important basis on large-scale solar sail membrane select and fold-deploying method design.

Development of Bonded Joint Technology for a Rigidizable-Inflatable Deployable Truss

NASA Technical Reports Server (NTRS)

Smeltzer, Stanley S., III

2006-01-01

Microwave and Synthetic Aperture Radar antenna systems have been developed as instrument systems using truss structures as their primary support and deployment mechanism for over a decade. NASA Langley Research Center has been investigating fabrication, modular assembly, and deployment methods of lightweight rigidizable/inflatable linear truss structures during that time for large spacecraft systems. The primary goal of the research at Langley Research Center is to advance these existing state-of-the-art joining and deployment concepts to achieve prototype system performance in a relevant space environment. During 2005, the development, fabrication, and testing of a 6.7 meter multi-bay, deployable linear truss was conducted at Langley Research Center to demonstrate functional and precision metrics of a rigidizable/inflatable truss structure. The present paper is intended to summarize aspects of bonded joint technology developed for the 6.7 meter deployable linear truss structure while providing a brief overview of the entire truss fabrication, assembly, and deployment methodology. A description of the basic joint design, surface preparation investigations, and experimental joint testing of component joint test articles will be described. Specifically, the performance of two room temperature adhesives were investigated to obtain qualitative data related to tube folding testing and quantitative data related to tensile shear strength testing. It was determined from the testing that a polyurethane-based adhesive best met the rigidizable/inflatable truss project requirements.

Sandia National Laboratories: Employee & Retiree Resources: Emergency

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research: Laboratory Directed Research &

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Search Results

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia National Laboratories: Missions:

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: About Sandia: Community Involvement:

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Social Media

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Visiting Research Scholars

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Videos

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: About Sandia

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Image Gallery

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research: Biodefense

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Privacy and Security

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research: Research Foundations: Nanodevices

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia Digital Media

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Careers: Special Programs

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Cooperative Monitoring Center

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Cooperative Research and Development

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research: Bioscience

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Integrated Military Systems

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Classroom Technology: Where Schools Stand. Technology Counts, 2017. Education Week. Volume 36, Issue 35

ERIC Educational Resources Information Center

Bushweller, Kevin C., Ed.

2017-01-01

This report, the 20th edition of "Technology Counts," examines how schools are tackling tech training for teachers, "passive" vs. "active" use of digital tools, and online learning needs. Contents include: (1) Tracking 20 Years of Change in Ed Tech (Kevin C. Bushweller); (2) Poor Students Face Digital Divide in How…

Does Technology Integration "Work" when Key Barriers Are Removed?

ERIC Educational Resources Information Center

Lowther, Deborah L.; Inan, Fethi A.; Strahl, J. Daniel; Ross, Steven M.

2008-01-01

The effectiveness of Tennessee EdTech Launch (TnETL), a statewide technology program designed to meet the No Child Left Behind (NCLB) mandate, was investigated in this matched treatment-control quasi-experimental study. The goal of the program was to provide full-time, on-site technology coaches to prepare teachers to create lessons that engage…

Adaptable Deployable Entry & Placement Technology (ADEPT) for Cubesat Delivery to Mars Surface

NASA Technical Reports Server (NTRS)

Wercinski, Paul

2014-01-01

The Adaptable, Deployable Entry and Placement Technology (ADEPT), uses a mechanical skeleton to deploy a revolutionary carbon fabric system that serves as both heat shield and primary structure during atmospheric entry. The NASA ADEPT project, currently funded by the Game Changing Development Program in STMD is currently focused on 1m class hypersonic decelerators for the delivery of very small payloads ( 5 kg) to locations of interest in an effort to leverage low-cost platforms to rapidly mature the technology while simultaneously delivering high-value science. Preliminary mission design and aerothermal performance testing in arcjets have shown the ADEPT system is quite capable of safe delivery of cubesats to Mars surface. The ability of the ADEPT to transit to Mars in a stowed configuration (similar to an umbrella) provides options for integration with the Mars 2020 cruise stage, even to consider multiple ADEPTs. System-level test campaigns are underway for FY15 execution or planning for FY16. These include deployment testing, wind tunnel testing, system-level arc jet testing, and a sounding rocket flight test. The goal is system level maturation (TRL 6) at a 1m class Mars design reference mission configuration.

Ames Infusion Stories for NASA Annual Technology Report: Nano Entry System for CubeSat-Class Payloads

NASA Technical Reports Server (NTRS)

Smith, Brandon; Jan, Darrell Leslie; Venkatapathy, Etiraj

2015-01-01

The Nano Entry System for CubeSat-Class Payloads led to the development of the Nano-Adaptable Deployable Entry and Placement Technology ("Nano-ADEPT"). Nano-ADEPT is a mechanically deployed entry, descent, and landing (EDL) system that stows during launch and cruise (like an umbrella) and serves as both heat shield and primary structure during EDL. It is especially designed for small spacecraft where volume is a limiting constraint.

A revolute joint with linear load-displacement response for a deployable lidar telescope

NASA Technical Reports Server (NTRS)

Lake, Mark S.; Warren, Peter A.; Peterson, Lee D.

1996-01-01

NASA Langley Research Center is developing concepts for an advanced spacecraft, called LidarTechSat, to demonstrate key structures and mechanisms technologies necessary to deploy a segmented telescope reflector. Achieving micron-accuracy deployment requires significant advancements in deployment mechanism design, such as the revolute joint presented herein. The joint exhibits load-cycling response that is essentially linear with less than 2% hysteresis, and the joint rotates with less than 7 mN-m (1 in-oz) of resistance. A prototype reflector metering truss incorporating the joint exhibits only a few microns of kinematic error under repected deployment and impulse loading. No other mechanically deployment structure found in the literature has been demonstrated to be this kinematically accurate.

SunShot solar power reduces costs and uncertainty in future low-carbon electricity systems.

PubMed

Mileva, Ana; Nelson, James H; Johnston, Josiah; Kammen, Daniel M

2013-08-20

The United States Department of Energy's SunShot Initiative has set cost-reduction targets of $1/watt for central-station solar technologies. We use SWITCH, a high-resolution electricity system planning model, to study the implications of achieving these targets for technology deployment and electricity costs in western North America, focusing on scenarios limiting carbon emissions to 80% below 1990 levels by 2050. We find that achieving the SunShot target for solar photovoltaics would allow this technology to provide more than a third of electric power in the region, displacing natural gas in the medium term and reducing the need for nuclear and carbon capture and sequestration (CCS) technologies, which face technological and cost uncertainties, by 2050. We demonstrate that a diverse portfolio of technological options can help integrate high levels of solar generation successfully and cost-effectively. The deployment of GW-scale storage plays a central role in facilitating solar deployment and the availability of flexible loads could increase the solar penetration level further. In the scenarios investigated, achieving the SunShot target can substantially mitigate the cost of implementing a carbon cap, decreasing power costs by up to 14% and saving up to $20 billion ($2010) annually by 2050 relative to scenarios with Reference solar costs.

Modelling socio-environmental sensitivities: how public responses to low carbon energy technologies could shape the UK energy system.

PubMed

Moran Jay, Brighid; Howard, David; Hughes, Nick; Whitaker, Jeanette; Anandarajah, Gabrial

2014-01-01

Low carbon energy technologies are not deployed in a social vacuum; there are a variety of complex ways in which people understand and engage with these technologies and the changing energy system overall. However, the role of the public's socio-environmental sensitivities to low carbon energy technologies and their responses to energy deployments does not receive much serious attention in planning decarbonisation pathways to 2050. Resistance to certain resources and technologies based on particular socio-environmental sensitivities would alter the portfolio of options available which could shape how the energy system achieves decarbonisation (the decarbonisation pathway) as well as affecting the cost and achievability of decarbonisation. Thus, this paper presents a series of three modelled scenarios which illustrate the way that a variety of socio-environmental sensitivities could impact the development of the energy system and the decarbonisation pathway. The scenarios represent risk aversion (DREAD) which avoids deployment of potentially unsafe large-scale technology, local protectionism (NIMBY) that constrains systems to their existing spatial footprint, and environmental awareness (ECO) where protection of natural resources is paramount. Very different solutions for all three sets of constraints are identified; some seem slightly implausible (DREAD) and all show increased cost (especially in ECO).

Modelling Socio-Environmental Sensitivities: How Public Responses to Low Carbon Energy Technologies Could Shape the UK Energy System

PubMed Central

Moran Jay, Brighid

2014-01-01

Low carbon energy technologies are not deployed in a social vacuum; there are a variety of complex ways in which people understand and engage with these technologies and the changing energy system overall. However, the role of the public's socio-environmental sensitivities to low carbon energy technologies and their responses to energy deployments does not receive much serious attention in planning decarbonisation pathways to 2050. Resistance to certain resources and technologies based on particular socio-environmental sensitivities would alter the portfolio of options available which could shape how the energy system achieves decarbonisation (the decarbonisation pathway) as well as affecting the cost and achievability of decarbonisation. Thus, this paper presents a series of three modelled scenarios which illustrate the way that a variety of socio-environmental sensitivities could impact the development of the energy system and the decarbonisation pathway. The scenarios represent risk aversion (DREAD) which avoids deployment of potentially unsafe large-scale technology, local protectionism (NIMBY) that constrains systems to their existing spatial footprint, and environmental awareness (ECO) where protection of natural resources is paramount. Very different solutions for all three sets of constraints are identified; some seem slightly implausible (DREAD) and all show increased cost (especially in ECO). PMID:24587735

Thinking about Educational Technology and Creativity

ERIC Educational Resources Information Center

Spector, J. Michael

2016-01-01

The 2016 National Educational Technology Plan mentions fostering creativity, collaboration, leadership, and critical thinking while engaging learners in complex, real-world challenges through a project-based learning approach (see http://tech.ed.gov/netp/learn ing/). The Partnership for 21st Century Learning (P21; see…

75 FR 67770 - Sara Lee Corporation Including On-Site Leased Workers From EDS, Hewitt Packard, Sapphire...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

..., Deductions, Collections, Call Center, Information Technology, Accounts Payable, General Accounts, Financial Accounts, Payroll, and Employee Master Data Departments Including On-Site Leased Workers From ADECCO..., Deductions, Collections, Call Center, Information Technology, Accounts Payable, General Accounts, Financial...

Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)

NASA Technical Reports Server (NTRS)

Nishioka, Kenji (Editor)

1986-01-01

The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.

A state-of-art review of low intensity extracorporeal shock wave therapy and lithotripter machines for the treatment of erectile dysfunction.

PubMed

Chung, Eric; Wang, Juan

2017-12-01

Current treatment for erectile dysfunction (ED) mostly attempts to improve erectile function with limited impact on altering the underlying pathophysiology of ED. Recent animal experiments have supported the notion that low intensity extracorporeal shockwave therapy (LIESWT) significantly improves penile hemodynamics and might induce structural changes that regenerate penile tissue. Areas covered: This review article provides an overview of the basic mechanics and clinical studies pertaining to LIESWT and its use in the field of ED. We identify several key aspects of LIESWT and compare contemporary LIESWT machines and their clinical outcomes. Expert commentary: There is emerging and strong literature to support the use of LIESWT in men with ED, with many clinical studies reported encouraging results in the use of LIESWT with improved erectile function, good safety records, and short-term durability. However, there is a need to define which subgroup of ED population is best suited and the LIESWT treatment protocol including LIESWT template, modality of shock waves energy, emission frequency, and total energy delivery. More stringent randomised controlled trials are warranted before there is widespread acceptance of this LIESWT technology as the standard of care in ED.

Texas Department of Transportation, intelligent transportation systems (ITS) deployment strategy

DOT National Transportation Integrated Search

1996-05-01

The purpose of this document is to present an initial TxDOT-wide framework for the deployment : of Intelligent Transportation Systems (ITS) technologies, techniques and practices in support of the : principal agency mission of moving people and goods...

Austin area-wide IVHS plan and IH-35 corridor deployment plan

DOT National Transportation Integrated Search

1998-02-01

This report describes efforts towards developing an intelligent transportation systems (ITS) deployment plan for the Austin metropolitan area in Texas. ITS issues, strategies, and technologies are discussed. The focus of the study is to support the f...

Connected Vehicle Pilot Deployment Program : New York City, New York

DOT National Transportation Integrated Search

2017-03-03

The New York City Connected Vehicle Pilot aims to improve the safety of travelers and pedestrians in the city through the deployment of connected vehicle technologies. This objective directly aligns with the city's Vision Zero initiative, which began...

Model Validation and Site Characterization for Early Deployment MHK Sites and Establishment of Wave Classification Scheme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilcher, Levi F

Model Validation and Site Characterization for Early Deployment Marine and Hydrokinetic Energy Sites and Establishment of Wave Classification Scheme presentation from from Water Power Technologies Office Peer Review, FY14-FY16.

CV pilot deployment concept phase 1, outreach plan — ICF Wyoming.

DOT National Transportation Integrated Search

2016-06-24

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected vehicle pilot deployment program phase 2, data management plan - Wyoming

DOT National Transportation Integrated Search

2017-04-10

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Miami Valley ITS : early deployment plan : recommended system architecture and technologies working paper

DOT National Transportation Integrated Search

1997-08-01

This system architecture paper will discuss proposed architectures for the four infrastructure oriented program areas defined by the project team and presented in the Strategic Deployment Plan (August 1997). This report will concentrate on defi...

Review of Existing Literature and Deployment Tracking Surveys : Decision Factors Influencing ITS Adoption

DOT National Transportation Integrated Search

2012-04-01

ITS is at cross-roads with deployment of first generation ITS technologies at a saturation point for mature ITS applications, especially in the large metropolitan areas across the United States. Understanding the motivating factors for adopting...

Commercial vehicle (CV) retrofit safety device (RSD) kits project.

DOT National Transportation Integrated Search

2014-07-01

Retrofit Safety Device (RSD) kits were developed and deployed on commercial vehicles as part of the U.S. DOT Connected Vehicle Safety Pilot to gain insight into the unique aspects of deploying connected vehicle technology in a commercial vehicle envi...

INNOVATIVE TECHNOLOGY VERIFICATION REPORT XRF ...

EPA Pesticide Factsheets

The Oxford ED2000 x-ray fluorescence (XRF) analyzer was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The field portion of the demonstration was conducted in January 2005 at the Kennedy Athletic, Recreational and Social Park (KARS) at Kennedy Space Center on Merritt Island, Florida. The demonstration was designed to collect reliable performance and cost data for the ED2000 analyzer and seven other commercially available XRF instruments for measuring trace elements in soil and sediment. The performance and cost data were evaluated to document the relative performance of each XRF instrument. This innovative technology verification report describes the objectives and the results of that evaluation and serves to verify the performance and cost of the ED2000 analyzer. Separate reports have been prepared for the other XRF instruments that were evaluated as part of the demonstration. The objectives of the evaluation included determining each XRF instrument’s accuracy, precision, sample throughput, and tendency for matrix effects. To fulfill these objectives, the field demonstration incorporated the analysis of 326 prepared samples of soil and sediment that contained 13 target elements. The prepared samples included blends of environmental samples from nine different sample collection sites as well as spiked samples with certified element concentrations. Accuracy was assessed by com

Strategies for improving outcomes in the acute management of ischemic stroke in rural emergency departments: a quality improvement initiative in the Stroke Belt.

PubMed

Jauch, Edward C; Huang, David Y; Gardner, Allison J; Blum, Julie L

2018-01-01

The timely evaluation and initiation of treatment for acute ischemic stroke (AIS) is critical to optimal patient outcomes. However, clinical practice often falls short of guideline-established goals. Hospitals in rural regions of the USA, and notably those in the Stroke Belt, are particularly challenged to meet timing goals since the vast majority of primary stroke centers (PSCs) are concentrated in urban academic institutions. Between May 2015 and May 2017, emergency department (ED) teams from 5 non-PSC hospitals in the Stroke Belt participated in a quality improvement (QI) initiative. The intervention included a baseline practice assessment survey, repeat audit-and-feedback cycles with patient data on AIS treatment timing, personalized Continuing Medical Education/Continuing Education-certified grand rounds sessions at each participating site with expert study faculty, targeted reinforcement of best practices, and follow-up to evaluate the benefits and limitations of the intervention. At the start of the initiative, clinical staff from participating EDs overestimated the proportion of patients with AIS who received alteplase within the guideline-recommended 60-minute door-to-needle window at their facility. At the end of the 6-month intervention period, significantly more patients were treated with alteplase within 60 minutes of ED arrival compared to baseline across the entire sample (1.9% of patients at baseline vs. 5.2% at 6 months; P < 0.01). Similarly, there was a trend toward a decrease in the percentage of patients whose alteplase treatment was initiated more than 60 minutes after their arrival at the ED (67.3% at baseline vs. 22.2% at 6 months). Structured QI interventions that engage ED care teams to reflect on processes related to AIS diagnosis and treatment and deploy repeat audit-and-feedback cycles with real-time patient data have the potential to support an increase in the number of patients who receive alteplase within the guideline-recommended timeframe of 60 minutes from hospital arrival.

A Patient-Centered Emergency Department Management Strategy for Sickle-Cell Disease Super-Utilizers.

PubMed

Simpson, Grant G; Hahn, Hallie R; Powel, Alex A; Leverence, Robert R; Morris, Linda A; Thompson, Lara G; Zumberg, Marc S; Borde, Deepa J; Tyndall, Joseph A; Shuster, Jonathan J; Yealy, Donald M; Allen, Brandon R

2017-04-01

A subpopulation of sickle-cell disease patients, termed super-utilizers, presents frequently to emergency departments (EDs) for vaso-occlusive events and may consume disproportionate resources without broader health benefit. To address the healthcare needs of this vulnerable patient population, we piloted a multidisciplinary intervention seeking to create and use individualized patient care plans that alter utilization through coordinated care. Our goals were to assess feasibility primarily, and to assess resource use secondarily. We evaluated the effects of a single-site interventional study targeted at a population of adult sickle-cell disease super-utilizers using a pre- and post-implementation design. The pre-intervention period was 06/01/13 to 12/31/13 (seven months) and the post-intervention period was 01/01/14 to 02/28/15 (14 months). Our approach included patient-specific best practice advisories (BPA); an ED management protocol; and formation of a "medical home" for these patients. For 10 subjects targeted initially we developed and implemented coordinated care plans; after deployment, we observed a tendency toward reduction in ED and inpatient utilization across all measured indices. Between the annualized pre- and post-implementation periods we found the following: ED visits decreased by 16.5 visits/pt-yr (95% confidence interval [CI] [-1.32-34.2]); ED length of state (LOS) decreased by 115.3 hours/pt-yr (95% CI [-82.9-313.5]); in-patient admissions decreased by 4.20 admissions/pt-yr (95% CI [-1.73-10.1]); in-patient LOS decreased by 35.8 hours/pt-yr (95% CI [-74.9-146.7]); and visits where the patient left before treatment were reduced by an annualized total of 13.7 visits. We observed no patient mortality in our 10 subjects, and no patient required admission to the intensive care unit 72 hours following discharge. This effort suggests that a targeted approach is both feasible and potentially effective, laying a foundation for broader study.

Overcoming Endocrine Resistance by Targeting ER/FoxA1/IL-8 Axis

DTIC Science & Technology

2015-10-01

residual disease after 6-month neoadjuvant endocrine therapy 45 . Recent studies unveiled gain-of- function mutations in ESR1 , the gene encoding ER...described previously 61 . SYBR dye (Life Technologies) was used in real- time PCR and the target primer sequences are as follows: ESR1 forward...Breast Cancer Symposium (ed^(eds). Cancer Res (2013). 46. Li S, et al. Endocrine-therapy-resistant ESR1 variants revealed by genomic characterization of

A Study of Benefits Resulting from the AFIT (Air Force Institute of Technology) Education with Industry Program

DTIC Science & Technology

1989-09-01

A STUDY OF BENEFITS RESULTING FROM THE AFIT EDUCATION WITH INDUSTRY PROGRAM THESIS Ed R. Hernandez Captain, USAF AFIT/G SM/LSR/ 8 9S- 18_...RESULTING FROM THE AFIT EDUCATION WITH INDUSTRY PROGRAM THESIS Ed R. Hernandez Captain, USAF AFIT/GSM/LSR/89S-18 Approved for public release...5 Discussion .. ............. ........ 6 Education versus Training .. .. ............. 7 Concept of Learning .. .. ............... 10 Active Learning

Continuous Codes and Standards Improvement (CCSI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, Carl H; Burgess, Robert M; Buttner, William J

2015-10-21

As of 2014, the majority of the codes and standards required to initially deploy hydrogen technologies infrastructure in the United States have been promulgated. These codes and standards will be field tested through their application to actual hydrogen technologies projects. Continuous codes and standards improvement (CCSI) is a process of identifying code issues that arise during project deployment and then developing codes solutions to these issues. These solutions would typically be proposed amendments to codes and standards. The process is continuous because as technology and the state of safety knowledge develops there will be a need to monitor the applicationmore » of codes and standards and improve them based on information gathered during their application. This paper will discuss code issues that have surfaced through hydrogen technologies infrastructure project deployment and potential code changes that would address these issues. The issues that this paper will address include (1) setback distances for bulk hydrogen storage, (2) code mandated hazard analyses, (3) sensor placement and communication, (4) the use of approved equipment, and (5) system monitoring and maintenance requirements.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerald Hill; Kenneth Nemeth; Gary Garrett

The Southern States Energy Board's (SSEB) 'Regional Effort to Deploy Clean Coal Technologies' program began on June 1, 2003, and was completed on January 31, 2009. The project proved beneficial in providing state decision-makers with information that assisted them in removing barriers or implementing incentives to deploy clean coal technologies. This was accomplished through two specific tasks: (1) domestic energy security and diversity; and (2) the energy-water interface. Milestones accomplished during the project period are: (1) Presentations to Annual Meetings of SSEB Members, Associate Member Meetings, and the Gasification Technologies Council. (2) Energy: Water reports - (A) Regional Efforts tomore » Deploy Clean Coal Technologies: Impacts and Implications for Water Supply and Quality. June 2004. (B) Energy-Water Interface Challenges: Coal Bed Methane and Mine Pool Water Characterization in the Southern States Region. 2004. (C) Freshwater Availability and Constraints on Thermoelectric Power Generation in the Southeast U.S. June 2008. (3) Blackwater Interactive Tabletop Exercise - Decatur, Georgia April 2007. (4) Blackwater Report: Blackwater: Energy and Water Interdependency Issues: Best Practices and Lessons Learned. August 2007. (5) Blackwater Report: BLACKWATER: Energy Water Interdependency Issues REPORT SUMMARY. April 2008.« less

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, TNT DETECTION TECHNOLOGY, TEXAS INSTRUMENTS, SPREETA TM SENSOR

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, CLEAN ENVIRONMENT EQUIPMENT, SAMPLEASE BLADDER PUMP

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

Environmental Technology Verification Report - NATCO Group, Inc. – Paques THIOPAQ Gas Purification Technology

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, BURGE ENVIRONMENTAL INC. MULTIPROBE 100

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

Sandia National Laboratories: News: Publications: Environmental Reports

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia National Laboratories: News: Events

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: About Sandia: Environmental Responsibility

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: About Sandia: Community Involvement

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Publications: HPC Reports

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Community Involvement: Volunteer Programs

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Search Sandia Publications

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Working with Sandia: Small Business

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Publications: Strategic Plan

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Media Resources: Media Contacts

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Employee & Retiree Resources: Technical

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Z Pulsed Power Facility

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: National Security Missions: Defense Systems

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Advanced Simulation and Computing

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: News: Publications: Annual Report

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Employee & Retiree Resources: Remote Access

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Perceptions of the effect of information and communication technology on the quality of care delivered in emergency departments: a cross-site qualitative study.

PubMed

Callen, Joanne; Paoloni, Richard; Li, Julie; Stewart, Michael; Gibson, Kathryn; Georgiou, Andrew; Braithwaite, Jeffrey; Westbrook, Johanna

2013-02-01

We identify and describe emergency physicians' and nurses' perceptions of the effect of an integrated emergency department (ED) information system on the quality of care delivered in the ED. A qualitative study was conducted in 4 urban EDs, with each site using the same ED information system. Participants (n=97) were physicians and nurses with data collected by 69 detailed interviews, 5 focus groups (28 participants), and 26 hours of structured observations. Results revealed new perspectives on how an integrated ED information system was perceived to affect incentives for use, awareness of colleagues' activities, and workflow. A key incentive was related to the positive effect of the ED information system on clinical decisionmaking because of improved and quicker access to patient-specific and knowledge-base information compared with the previous stand-alone ED information system. Synchronous access to patient data was perceived to lead to enhanced awareness by individual physicians and nurses of what others were doing within and outside the ED, which participants claimed contributed to improved care coordination, communication, clinical documentation, and the consultation process. There was difficulty incorporating the use of the ED information system with clinicians' work, particularly in relation to increased task complexity; duplicate documentation, and computer issues related to system usability, hardware, and individuals' computer skills and knowledge. Physicians and nurses perceived that the integrated ED information system contributed to improvements in the delivery of patient care, enabling faster and better-informed decisionmaking and specialty consultations. The challenge of electronic clinical documentation and balancing data entry demands with system benefits necessitates that new methods of data capture, suited to busy clinical environments, be developed. Copyright © 2012. Published by Mosby, Inc.

Smart Grid Communications System Blueprint

NASA Astrophysics Data System (ADS)

Clark, Adrian; Pavlovski, Chris

2010-10-01

Telecommunications operators are well versed in deploying 2G and 3G wireless networks. These networks presently support the mobile business user and/or retail consumer wishing to place conventional voice calls and data connections. The electrical power industry has recently commenced transformation of its distribution networks by deploying smart monitoring and control devices throughout their networks. This evolution of the network into a `smart grid' has also motivated the need to deploy wireless technologies that bridge the communication gap between the smart devices and information technology systems. The requirements of these networks differ from traditional wireless networks that communications operators have deployed, which have thus far forced energy companies to consider deploying their own wireless networks. We present our experience in deploying wireless networks to support the smart grid and highlight the key properties of these networks. These characteristics include application awareness, support for large numbers of simultaneous cell connections, high service coverage and prioritized routing of data. We also outline our target blueprint architecture that may be useful to the industry in building wireless and fixed networks to support the smart grid. By observing our experiences, telecommunications operators and equipment manufacturers will be able to augment their current networks and products in a way that accommodates the needs of the emerging industry of smart grids and intelligent electrical networks.

The deployable, inflatable wing technology demonstrator experiment aircraft looks good during a flig

NASA Technical Reports Server (NTRS)

2001-01-01

The deployable, inflatable wing technology demonstrator experiment aircraft looks good during a flight conducted by the NASA Dryden Flight Research Center, Edwards, California. The inflatable wing project represented a basic flight research effort by Dryden personnel. Three successful flights of the I2000 inflatable wing aircraft occurred. During the flights, the team air-launched the radio-controlled (R/C) I2000 from an R/C utility airplane at an altitude of 800-1000 feet. As the I2000 separated from the carrier aircraft, its inflatable wings 'popped-out,' deploying rapidly via an on-board nitrogen bottle. The aircraft remained stable as it transitioned from wingless to winged flight. The unpowered I2000 glided down to a smooth landing under complete control.

Vehicle Technology Simulation and Analysis Tools | Transportation Research

Science.gov Websites

| NREL Vehicle Technology Simulation and Analysis Tools Vehicle Technology Simulation and vehicle technologies with the potential to achieve significant fuel savings and emission reductions. NREL : Automotive Deployment Options Projection Tool The ADOPT modeling tool estimates vehicle technology

A Lightweight, Precision-Deployable, Optical Bench for High Energy Astrophysics Missions

NASA Astrophysics Data System (ADS)

Danner, Rolf; Dailey, D.; Lillie, C.

2011-09-01

The small angle of total reflection for X-rays, forcing grazing incidence optics with large collecting areas to long focal lengths, has been a fundamental barrier to the advancement of high-energy astrophysics. Design teams around the world have long recognized that a significant increase in effective area beyond Chandra and XMM-Newton requires either a deployable optical bench or separate X-ray optics and instrument module on formation flying spacecraft. Here, we show that we have in hand the components for a lightweight, precision-deployable optical bench that, through its inherent design features, is the affordable path to the next generation of imaging high-energy astrophysics missions. We present our plans for a full-scale engineering model of a deployable optical bench for Explorer-class missions. We intend to use this test article to raise the technology readiness level (TRL) of the tensegrity truss for a lightweight, precision-deployable optical bench for high-energy astrophysics missions from TRL 3 to TRL 5 through a set of four well-defined technology milestones. The milestones cover the architecture's ability to deploy and control the focal point, characterize the deployed dynamics, determine long-term stability, and verify the stowed load capability. Our plan is based on detailed design and analysis work and the construction of a first prototype by our team. Building on our prior analysis and the high TRL of the architecture components we are ready to move on to the next step. The key elements to do this affordably are two existing, fully characterized, flight-quality, deployable booms. After integrating them into the test article, we will demonstrate that our architecture meets the deployment accuracy, adjustability, and stability requirements. The same test article can be used to further raise the TRL in the future.

49 CFR 268.11 - Project eligibility standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM... from the technology (e.g. energy consumption compared to other transportation options); generic noise...

49 CFR 268.11 - Project eligibility standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM... from the technology (e.g. energy consumption compared to other transportation options); generic noise...

49 CFR 268.11 - Project eligibility standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM... from the technology (e.g. energy consumption compared to other transportation options); generic noise...

Low-Intensity Extracorporeal Shock Wave as a Novel Treatment for Erectile Dysfunction.

PubMed

Pan, Michael M; Raees, Ayman; Kovac, Jason R

2016-03-01

The paradigm of erectile dysfunction (ED) treatment was fundamentally altered following the introduction of oral phosphodiesterase type 5 inhibitors. Unfortunately, a significant number of men exhibit a suboptimal response and require additional management strategies. One of the novel, minimally invasive strategies being developed is low-intensity extracorporeal shock wave therapy. Used in the hope of delaying placement of an inflatable penile prosthesis, the final phase of ED treatment, low-intensity extracorporeal shock wave therapy is a unique application of an established technology that may hopefully one day expand the medical options for patients with ED. This commentary will highlight the physiology underlying this technique and summarize the most recent studies. © The Author(s) 2015.

Infection Prevention in the Emergency Department

PubMed Central

Liang, Stephen Y.; Theodoro, Daniel L.; Schuur, Jeremiah D.; Marschall, Jonas

2014-01-01

Infection prevention remains a major challenge in emergency care. Acutely ill and injured patients seeking evaluation and treatment in the emergency department (ED) not only have the potential to spread communicable infectious diseases to healthcare personnel and other patients, but are vulnerable to acquiring new infections associated with the care they receive. This article will evaluate these risks and review the existing literature for infection prevention practices in the ED, ranging from hand hygiene, standard and transmission-based precautions, healthcare personnel vaccination, and environmental controls to strategies for preventing healthcare-associated infections. We will conclude by examining what can be done to optimize infection prevention in the ED and identify gaps in knowledge where further research is needed. Successful implementation of evidence-based practices coupled with innovation of novel approaches and technologies tailored specifically to the complex and dynamic environment of the ED are the keys to raising the standard for infection prevention and patient safety in emergency care. PMID:24721718

Connected vehicle pilot deployment program phase 1, security management operational concept : ICF/Wyoming.

DOT National Transportation Integrated Search

2016-03-14

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Alternative Fuels Data Center

Science.gov Websites

on how to understand and plan for transportation advancements, including the increasing deployment of topics: Transportation electrification and the infrastructure necessary to support the increasing increasing deployment of these technologies; Impact of on-demand transit and mobility services on public

Connected vehicle pilot deployment program phase 2, data privacy plan – Wyoming.

DOT National Transportation Integrated Search

2016-04-14

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected Vehicle Pilot Deployment Program, Comprehensive Installation Plan - WYDOT CV Pilot

DOT National Transportation Integrated Search

2018-02-16

The Wyoming Department of Transportation's (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication technology to re...

Connected vehicle pilot deployment program phase 2 : data management plan - Tampa (THEA).

DOT National Transportation Integrated Search

2017-10-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication technology to re...

15 CFR 270.100 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.100 General. (a) Based on prior NIST experience, NIST expects that the Director will establish and deploy a Team to conduct an investigation at a...

15 CFR 270.101 - Preliminary reconnaissance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.101 Preliminary reconnaissance. (a) To... the site of a building failure. The Director may establish and deploy a Team to conduct the...

15 CFR 270.100 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.100 General. (a) Based on prior NIST experience, NIST expects that the Director will establish and deploy a Team to conduct an investigation at a...

15 CFR 270.101 - Preliminary reconnaissance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.101 Preliminary reconnaissance. (a) To... the site of a building failure. The Director may establish and deploy a Team to conduct the...

15 CFR 270.101 - Preliminary reconnaissance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.101 Preliminary reconnaissance. (a) To... the site of a building failure. The Director may establish and deploy a Team to conduct the...

15 CFR 270.100 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.100 General. (a) Based on prior NIST experience, NIST expects that the Director will establish and deploy a Team to conduct an investigation at a...

15 CFR 270.100 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.100 General. (a) Based on prior NIST experience, NIST expects that the Director will establish and deploy a Team to conduct an investigation at a...

15 CFR 270.101 - Preliminary reconnaissance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.101 Preliminary reconnaissance. (a) To... the site of a building failure. The Director may establish and deploy a Team to conduct the...

15 CFR 270.101 - Preliminary reconnaissance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.101 Preliminary reconnaissance. (a) To... the site of a building failure. The Director may establish and deploy a Team to conduct the...

15 CFR 270.100 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Establishment and Deployment of Teams § 270.100 General. (a) Based on prior NIST experience, NIST expects that the Director will establish and deploy a Team to conduct an investigation at a...

Connected vehicle pilot deployment program phase 1, safety management plan – ICF/Wyoming.

DOT National Transportation Integrated Search

2016-03-14

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Adaptable, Deployable Entry and Placement Technology (ADEPT) Overview of FY15 Accomplishments

NASA Technical Reports Server (NTRS)

Wercinski, P.; Brivkalns, C.; Cassell, A.; Chen, Y.-K.; Boghozian, T.; Chinnapongse, R.; Gasch, M.; Kruger, C.; Makino, A.; Milos, F.;

Development vs. Deployment: How Mature Should a Technology be Before it is Considered for Inclusion in an Acquisition Program?

DTIC Science & Technology

2007-04-30

surface combatant. Take, for instance, the tumblehome hull design of the new Zumwalt-class destroyer. If some critical issues were to arise with the ...more aggressive target is selected, there will be a greater increase in capability for each new system deployed. However, the expected duration of...push for the most advanced technology they can get into each new system. • This behavior exacerbates the problem and leads to even longer acquisition

Environmental Technology Verification Report - Electric Power and Heat Production Using Renewable Biogas at Patterson Farms

EPA Science Inventory

The U.S. EPA operates the Environmental Technology Verification program to facilitate the deployment of innovative technologies through performance verification and information dissemination. A technology area of interest is distributed electrical power generation, particularly w...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS--DONALDSON COMPANY, INC. 6277 FILTRATION MEDIA

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through high quality, peer reviewed data on technology performance to those involved in the des...

Environmental Technology Verification Report -- Baghouse filtration products, GE Energy QG061 filtration media ( tested May 2007)

EPA Science Inventory

EPA has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The Air Pollution Control Technology Verification Center, a cente...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOLOG, INC., MICRO-FLO BLADDER PUMP MODEL 57400

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program...

Sandia National Laboratories: What Sandia Looks For In Our Suppliers

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Working with Sandia: What Does Sandia Buy?

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia inks pact with Fire and Rescue

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Transforming Tech Ed: The Advanced Technological Education Community Leads in Developing and Implementing Teaching Strategies

ERIC Educational Resources Information Center

Patton, Madeline

2015-01-01

After years of working in the background to build the capacity of two-year college science, technology, engineering and math (STEM) faculty and the skills of technicians, the Advanced Technological Education (ATE) program is gaining recognition as a source of STEM workforce expertise. The ATE program's effective mentoring of STEM educators and its…

Is the Educational Technology Revolution Losing Steam? What Academic Leaders Can Do to Keep Us Moving Forward

ERIC Educational Resources Information Center

Miller, Michelle D.

2017-01-01

Educational technology has fueled a revolution in higher education. Technology-based models such as blended learning, fully online courses, online degree programs, and MOOCs (massive open online courses) are redefining what teaching looks like. They also greatly expand who gets to learn and where and when that learning can take place. The ed tech…

The Open Ed Tech: Never Mind the Edupunks; or, The Great Web 2.0 Swindle

ERIC Educational Resources Information Center

Lamb, Brian; Groom, Jim

2010-01-01

Has the wave of the open web crested? What does "open educational technology" look like, and does it stand for anything? In this article, the authors discuss the rise of open educational technology. The present range of Web 2.0 service providers offers a self-evident strategic technology framework. Without much effort, online teachers and learners…

Southeast Asian Space Programs: Motives, Cooperation, and Competition

DTIC Science & Technology

2014-09-01

LEO low Earth orbit MTCR Missile Technology Control Regime NAMRIA National Mapping and Resource Information Authority NASA National Aeronautics and...Technology’s role 27 Leo Marx and Merritt Roe Smith, “Introduction,” in Does Technology Drive History: The...Dilemma of Technological Determinism, ed. Merritt Roe Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), xii. 28 Donald MacKenzie and Judy

SCARLET I: Mechanization solutions for deployable concentrator optics integrated with rigid array technology

NASA Technical Reports Server (NTRS)

Wachholz, James J.; Murphy, David M.

1996-01-01

The SCARLET I (Solar Concentrator Army with Refractive Linear Element Technology) solar array wing was designed and built to demonstrate, in flight, the feasibility of integrating deployable concentrator optics within the design envelope of typical rigid array technology. Innovative mechanism designs were used throughout the array, and a full series of qualification tests were successfully performed in anticipation of a flight on the Multiple Experiment Transporter to Earth Orbit and Return (METEOR) spacecraft. Even though the Conestoga launch vehicle was unable to place the spacecraft in orbit, the program effort was successful in achieving the milestones of analytical and design development functional validation, and flight qualification, thus leading to a future flight evaluation for the SCARLET technology.

Outlook and Challenges of Perovskite Solar Cells toward Terawatt-Scale Photovoltaic Module Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Kai; Kim, Donghoe; Whitaker, James B

Rapid development of perovskite solar cells (PSCs) during the past several years has made this photovoltaic (PV) technology a serious contender for potential large-scale deployment on the terawatt scale in the PV market. To successfully transition PSC technology from the laboratory to industry scale, substantial efforts need to focus on scalable fabrication of high-performance perovskite modules with minimum negative environmental impact. Here, we provide an overview of the current research and our perspective regarding PSC technology toward future large-scale manufacturing and deployment. Several key challenges discussed are (1) a scalable process for large-area perovskite module fabrication; (2) less hazardous chemicalmore » routes for PSC fabrication; and (3) suitable perovskite module designs for different applications.« less

SCARLET I: Mechanization solutions for deployable concentrator optics integrated with rigid array technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wachholz, J.J.; Murphy, D.M.

1996-05-01

The SCARLET I (Solar Concentrator Army with Refractive Linear Element Technology) solar array wing was designed and built to demonstrate, in flight, the feasibility of integrating deployable concentrator optics within the design envelope of typical rigid array technology. Innovative mechanism designs were used throughout the array, and a full series of qualification tests were successfully performed in anticipation of a flight on the Multiple Experiment Transporter to Earth Orbit and Return (METEOR) spacecraft. Even though the Conestoga launch vehicle was unable to place the spacecraft in orbit, the program effort was successful in achieving the milestones of analytical and designmore » development functional validation, and flight qualification, thus leading to a future flight evaluation for the SCARLET technology.« less

Carbon Lock-In: Barriers to the Deployment of Climate Change Mitigation Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lapsa, Melissa Voss; Brown, Marilyn A.

The United States shares with many other countries the objective of stabilizing greenhouse gas (GHG) concentrations in the Earth's atmosphere at a level that would prevent dangerous interference with the climate system. Many believe that accelerating the pace of technology improvement and deployment could significantly reduce the cost of achieving this goal. The critical role of new technologies is underscored by the fact that most anthropogenic greenhouse gases emitted over the next century will come from equipment and infrastructure built in the future. As a result, new technologies and fuels have the potential to transform the nation's energy system whilemore » meeting climate change as well as energy security and other goals.« less

Development of an electronic emergency department-based geo-information injury surveillance system in Hong Kong.

PubMed

Chow, C B; Leung, M; Lai, Adela; Chow, Y H; Chung, Joanne; Tong, K M; Lit, Albert

2012-06-01

To describe the experience in the development of an electronic emergency department (ED)-based injury surveillance (IS) system in Hong Kong using data-mining and geo-spatial information technology (IT) for a Safe Community setup. This paper described the phased development of an emergency department-based IS system based on World Health Organization (WHO) injury surveillance Guideline to support safety promotion and injury prevention in a Safe Community in Hong Kong starting 2002. The initial ED data-based only collected data on name, sex, age, address, eight general categories of injury types (traffic, domestic, common assault, indecent assault, batter, industrial, self-harm and sports) and disposal from ED. Phase 1--manual data collection on International Classification of External Causes of Injury pre-event data; Phase 2--manual form was converted to electronic format using web-based data mining technology with built in data quality monitoring mechanism; Phase 3--integration of injury surveillance-data with in-patient hospital information; and Phase 4--geo-spatial information and body mapping were introduced to geo-code exact place of injury in an electronic map and site of injury on body map. It was feasible to develop a geo-spatial IS system at busy ED to collect valuable information for safety promotion and injury prevention at Safe Community setting. The keys for successful development and implementation involves engagement of all stakeholders at design and implementation of the system with injury prevention as ultimate goal, detail workflow planning at front end, support from the management, building on exiting system and appropriate utilisation of modern technology. Copyright © 2011 Elsevier Ltd. All rights reserved.

SEMAT--the next generation of inexpensive marine environmental monitoring and measurement systems.

PubMed

Trevathan, Jarrod; Johnstone, Ron; Chiffings, Tony; Atkinson, Ian; Bergmann, Neil; Read, Wayne; Theiss, Susan; Myers, Trina; Stevens, Tom

2012-01-01

There is an increasing need for environmental measurement systems to further science and thereby lead to improved policies for sustainable management. Marine environments are particularly hostile and extremely difficult for deploying sensitive measurement systems. As a consequence the need for data is greatest in marine environments, particularly in the developing economies/regions. Expense is typically the most significant limiting factor in the number of measurement systems that can be deployed, although technical complexity and the consequent high level of technical skill required for deployment and servicing runs a close second. This paper describes the Smart Environmental Monitoring and Analysis Technologies (SEMAT) project and the present development of the SEMAT technology. SEMAT is a "smart" wireless sensor network that uses a commodity-based approach for selecting technologies most appropriate to the scientifically driven marine research and monitoring domain/field. This approach allows for significantly cheaper environmental observation systems that cover a larger geographical area and can therefore collect more representative data. We describe SEMAT's goals, which include: (1) The ability to adapt and evolve; (2) Underwater wireless communications; (3) Short-range wireless power transmission; (4) Plug and play components; (5) Minimal deployment expertise; (6) Near real-time analysis tools; and (7) Intelligent sensors. This paper illustrates how the capacity of the system has been improved over three iterations towards realising these goals. The result is an inexpensive and flexible system that is ideal for short-term deployments in shallow coastal and other aquatic environments.

SEMAT — The Next Generation of Inexpensive Marine Environmental Monitoring and Measurement Systems

PubMed Central

Trevathan, Jarrod; Johnstone, Ron; Chiffings, Tony; Atkinson, Ian; Bergmann, Neil; Read, Wayne; Theiss, Susan; Myers, Trina; Stevens, Tom

2012-01-01

There is an increasing need for environmental measurement systems to further science and thereby lead to improved policies for sustainable management. Marine environments are particularly hostile and extremely difficult for deploying sensitive measurement systems. As a consequence the need for data is greatest in marine environments, particularly in the developing economies/regions. Expense is typically the most significant limiting factor in the number of measurement systems that can be deployed, although technical complexity and the consequent high level of technical skill required for deployment and servicing runs a close second. This paper describes the Smart Environmental Monitoring and Analysis Technologies (SEMAT) project and the present development of the SEMAT technology. SEMAT is a “smart” wireless sensor network that uses a commodity-based approach for selecting technologies most appropriate to the scientifically driven marine research and monitoring domain/field. This approach allows for significantly cheaper environmental observation systems that cover a larger geographical area and can therefore collect more representative data. We describe SEMAT's goals, which include: (1) The ability to adapt and evolve; (2) Underwater wireless communications; (3) Short-range wireless power transmission; (4) Plug and play components; (5) Minimal deployment expertise; (6) Near real-time analysis tools; and (7) Intelligent sensors. This paper illustrates how the capacity of the system has been improved over three iterations towards realising these goals. The result is an inexpensive and flexible system that is ideal for short-term deployments in shallow coastal and other aquatic environments. PMID:23012567

Space experiments on basic technologies for a space elevator using microsatellites

NASA Astrophysics Data System (ADS)

Yamagiwa, Yoshiki; Nohmi, Masahiro; Aoki, Yoshio; Momonoi, Yu; Nanba, Hirotaka; Aiga, Masanori; Kumao, Takeru; Watahiki, Masahito

2017-09-01

We attempt to verify two basic technologies required for a space elevator using microsatellites; the tether (cable) deployment technology and the climber operation along the tether in space. Tether deployment is performed by a CubeSat called STARS-C (Space Tethered Autonomous Robotic Satellite - Cube) which will be released from the Japanese experimental module Kibo on ISS early in 2017. STARS-C consists of a mother satellite (MS) and daughter satellite (DS) connected by a 100-m tether. Its mission is focused on the tether deployment for studying the tether dynamics during the deployment with the goal of improving the smoothness of such deployment in future tether missions including space elevator. The MS and DS have common subsystems, including power, communication, and command and data handling systems. They also have a tether unit with spool and reel mechanisms as a mission system. In addition, we have been designing the next-step microsatellite called STARS-E (Space Tethered Autonomous Robotic Satellite - Elevator) under a Grant-in-Aid for Scientific Research. STARS-E is a 500-mm size satellite intended to verify the climber operation in space. It consists of a MS and DS jointed by a 2-km tether, and a climber that moves along the tether. STARS-C was launched on December 9 in 2016 and will be performed its mission early in 2017. STARS-E is in the BBM phase, and some designs are currently being fixed.

Technical memoranda : ITS early deployment program : I-5 Seattle to Vancouver B.C.

DOT National Transportation Integrated Search

1998-01-01

The I-5 Seattle to Vancouver B.C. study is intended to provide the Washington State Department of Transportation (WSDOT) with an implementation plan for the deployment of ITS technologies along Interstate 5 from the U.S./Canadian international border...

Strategic plan for early deployment of intelligent transportation systems on Interstate 40 corridor

DOT National Transportation Integrated Search

1997-05-01

This report presents the results of a study by Kimley-Horn and Associates, Inc. for Arizonas Transportation Research Center to develop a strategic plan to deploy ITS rural technologies along the I-40 corridor in northern Arizona. The report descri...

Strategic plan for early deployment of intelligent transportation systems on Interstate 40 Corridor

DOT National Transportation Integrated Search

1997-05-01

This report presents the results of a study by Kimley-Horn and Associates, Inc. for Arizonas Transportation Research Center to develop a strategic plan to deploy ITS rural technologies along the I-40 corridor in northern Arizona. The report descri...

Connected vehicle pilot deployment program phase 1, concept of operations (ConOps), ICF/Wyoming.

DOT National Transportation Integrated Search

2015-12-01

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected Vehicle Pilot Deployment Program Phase 1, Human Use Approval Summary – ICF/Wyoming.

DOT National Transportation Integrated Search

2016-07-18

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected Vehicle Pilot Deployment Concept Phase 1, System Requirements Specification (SyRS), ICF Wyoming.

DOT National Transportation Integrated Search

2016-09-02

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected vehicle pilot deployment program phase 1, participant training and education plan – ICF/Wyoming.

DOT National Transportation Integrated Search

2016-06-22

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Connected Vehicle Pilot Deployment Program phase 1 : partnership status summary : ICF/Wyoming : draft report.

DOT National Transportation Integrated Search

2016-08-12

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

ADEPT - A Mechanically Deployable Entry System Technology in Development at NASA

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Wercinski, Paul; Cassell, Alan; Smith, Brandon; Yount, Bryan

2016-01-01

The proposed presentation will give an overview of a mechanically deployable entry system concept development with a comprehensive summary of the ground tests and design development completed to-date, and current plans for a small-scale flight test in the near future.

Connected vehicle pilot deployment program phase II data privacy plan – Tampa (THEA).

DOT National Transportation Integrated Search

2017-02-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to re...

Enhanced In-Pile Instrumentation at the Advanced Test Reactor

NASA Astrophysics Data System (ADS)

Rempe, Joy L.; Knudson, Darrell L.; Daw, Joshua E.; Unruh, Troy; Chase, Benjamin M.; Palmer, Joe; Condie, Keith G.; Davis, Kurt L.

2012-08-01

Many of the sensors deployed at materials and test reactors cannot withstand the high flux/high temperature test conditions often requested by users at U.S. test reactors, such as the Advanced Test Reactor (ATR) at the Idaho National Laboratory. To address this issue, an instrumentation development effort was initiated as part of the ATR National Scientific User Facility in 2007 to support the development and deployment of enhanced in-pile sensors. This paper provides an update on this effort. Specifically, this paper identifies the types of sensors currently available to support in-pile irradiations and those sensors currently available to ATR users. Accomplishments from new sensor technology deployment efforts are highlighted by describing new temperature and thermal conductivity sensors now available to ATR users. Efforts to deploy enhanced in-pile sensors for detecting elongation and real-time flux detectors are also reported, and recently-initiated research to evaluate the viability of advanced technologies to provide enhanced accuracy for measuring key parameters during irradiation testing are noted.

Flying on Sun Shine: Sailing in Space

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alhorn, Dean

2012-03-28

On January 20th, 2011, NanoSail-D successfully deployed its sail in space. It was the first solar sail vehicle to orbit the earth and the second sail ever unfurled in space. The 10m2 sail, deployment mechanism and electronics were packed into a 3U CubeSat with a volume of about 3500cc. The NanoSail-D mission had two objectives: eject a nanosatellite from a minisatellite; deploy its sail from a highly compacted volume to validate large structure deployment and potential de-orbit technologies. NanoSail-D was jointly developed by NASA's Marshall Space Flight Center and Ames Research Center. The ManTech/NeXolve Corporation provided key sail design support.more » NanoSail-D is managed by Marshall and jointly sponsored by the Army Space and Missile Defense Command, the Space Test Program, the Von Braun Center for Science and Innovation and Dynetics Inc. The presentation will provide insights into sailcraft advances and potential missions enabled by this emerging in-space propulsion technology.« less

Chemical Design of Elastomers

DTIC Science & Technology

1987-05-19

of the accelerated vulcanizates. In the 1960s Campbell, Wise and Coran (52) developed characterization techniques to study the effects of compounding...34, Oae, S., Ed., Plenum Press, New York, 1977. 5. Coran , A.Y., "Vulcanization", in "Science and Technology of Rubber," Eirich, F.R., Ed., Academic Press...New York, 1978. 6. Coran , A.Y., Chemtech 106(1983). 7. Coleman, M.M., Shelton J.R. and Koenig, J.L., Ind. Eng. Chem., Prod. Res. Develop. 13, 155

Learning and Adaptive Hybrid Systems for Nonlinear Control

DTIC Science & Technology

1991-05-01

34 Invention Report, S81-64, File 1, Office of Technology Liscensirig, Stanford University, 1982. [Ros62J Rosenblatt, F., Principles of Neurodynamics ...Explorations in the Microstructure of Cognition , vol. 1, Rumelhart, D., and J. McClelland, ed., MIT Press, Carbnbdge, MA, 1986. [RI-1W86] Rumnelhart, D., 0...Microstructure of Cognition , vol. 1, Rumelhart, D., and J. McClelland, ed., MIT Pres, Cambridge, MA, 1986. [Sain67] Samuel, A., "Some Studies in Machine Learning

Enabling Healthcare IT Governance: Human Task Management Service for Administering Emergency Department's Resources for Efficient Patient Flow.

PubMed

Rodriguez, Salvador; Aziz, Ayesha; Chatwin, Chris

2014-01-01

The use of Health Information Technology (HIT) to improve healthcare service delivery is constantly increasing due to research advances in medical science and information systems. Having a fully automated process solution for a Healthcare Organization (HCO) requires a combination of organizational strategies along with a selection of technologies that facilitate the goal of improving clinical outcomes. HCOs, requires dynamic management of care capability to realize the full potential of HIT. Business Process Management (BPM) is being increasingly adopted to streamline the healthcare service delivery and management processes. Emergency Departments (EDs) provide a case in point, which require multidisciplinary resources and services to deliver effective clinical outcomes. Managed care involves the coordination of a range of services in an ED. Although fully automated processes in emergency care provide a cutting edge example of service delivery, there are many situations that require human interactions with the computerized systems; e.g. Medication Approvals, care transfer, acute patient care. This requires a coordination mechanism for all the resources, computer and human, to work side by side to provide the best care. To ensure evidence-based medical practice in ED, we have designed a Human Task Management service to model the process of coordination of ED resources based on the UK's NICE Clinical guideline for managing the care of acutely ill patients. This functionality is implemented using Java Business process Management (jBPM).

Can teamwork and situational awareness (SA) in ED resuscitations be improved with a technological cognitive aid? Design and a pilot study of a team situation display.

PubMed

Parush, A; Mastoras, G; Bhandari, A; Momtahan, K; Day, K; Weitzman, B; Sohmer, B; Cwinn, A; Hamstra, S J; Calder, L

2017-12-01

Effective teamwork in ED resuscitations, including information sharing and situational awareness, could be degraded. Technological cognitive aids can facilitate effective teamwork. This study focused on the design of an ED situation display and pilot test its influence on teamwork and situational awareness during simulated resuscitation scenarios. The display design consisted of a central area showing the critical dynamic parameters of the interventions with an events time-line below it. Static information was placed at the sides of the display. We pilot tested whether the situation display could lead to higher scores on the Clinical Teamwork Scale (CTS), improved scores on a context-specific Situational Awareness Global Assessment Technique (SAGAT) tool, and team communication patterns that reflect teamwork and situational awareness. Resuscitation teamwork, as measured by the CTS, was overall better with the presence of the situation display as compared with no situation display. Team members discussed interventions more with the situation display compared with not having the situation display. Situational awareness was better with the situation display only in the trauma scenario. The situation display could be more effective for certain ED team members and in certain cases. Overall, this pilot study implies that a situation display could facilitate better teamwork and team communication in the resuscitation event. Copyright © 2017 Elsevier Inc. All rights reserved.

Q & A with Ed Tech Leaders: Interview with John R. Savery

ERIC Educational Resources Information Center

Fulgham, Susan M.; Shaughnessy, Michael F.

2014-01-01

John R. Savery is Professor of Education and Director of Instructional Services at the University of Akron. His research and teaching interests focus on problem-based learning and technology-rich learning environments. As Director he supports faculty integration of instructional technology across the spectrum, from traditional classrooms to…

Facilitating Guided Participation through Mobile Technologies: Designing Creative Learning Environments for Self and Others

ERIC Educational Resources Information Center

Evans, Michael A.; Johri, Aditya

2008-01-01

We appropriate Rogoff's ("Apprenticeship in thinking: Cognitive development in social context," 1991; in: Wertsch et al. (eds.) "Sociocultural studies of mind," 1993) notion of guided participation to demonstrate, through abbreviated case studies, our strategy for integrating mobile technology-based learning experiences in higher education. Guided…

2020 Vision: Experts Forecast What the Digital Revolution Will Bring Next

ERIC Educational Resources Information Center

T.H.E. Journal, 2010

2010-01-01

In this article, a trio of current and former federal ed tech honchos, as well as a host of technology leaders nationwide, offer their forecasts, while also considering the lessons the first chapters of digital age have left behind. A timeline of learning technologies is also included.

Q & A with Ed Tech Leaders: Interview with Eric Chiang

ERIC Educational Resources Information Center

Viner, Mark; Shaughnessy, Michael F.

2016-01-01

The authors present this interview with Eric Chiang, Associate Professor of Economics, Director of Instructional Technology, and Technology Director for the Online MBA Program at Florida Atlantic University. He has authored 26 peer-reviewed research publications and is the author of "CoreEconomics," an economic principles textbook now in…

Educational Technology in Voc Ed. Information Series No. 268.

ERIC Educational Resources Information Center

Lipson, Joseph I.

This monograph provides a vision of the future for vocational educators in a position to improve programs, such as teachers and administrators of local educational agencies and state leaders who set priorities in educational agencies. The monograph addresses nationwide technological concerns of the computer, image storage and creation, and…

76 FR 8721 - Notice of Submission for OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

...'' grants that are awarded funds for their entire multi-year project up-front in a single grant award to... the ED 524B to submit their final performance reports to demonstrate project success, impact and..., mechanical, or other technological collection techniques or other forms of information technology. Dated...

CT Innovators Reunion: Where Are They Now?

ERIC Educational Resources Information Center

Schaffhauser, Dian

2012-01-01

Each year, "Campus Technology" ("CT") gazes across higher ed horizons to identify the most innovative IT programs at colleges and universities around the globe. The projects "CT" profiles are inspiring examples of technology making a difference on campus--at least at that moment. The question is, have they stood the…

Connecting Ed & Tech: Partnering to Drive Student Outcomes

ERIC Educational Resources Information Center

Arnett, Thomas

2016-01-01

All too often, the connection between teachers and technology falls flat. Pioneering schools and educators search for technology to support new instructional models, only to find that existing options do not align with their evolving classroom practices. This case study describes how Leadership Public Schools (LPS), a charter school management…

Distance Education: The Application of Technology to Education and Training (APTEC).

ERIC Educational Resources Information Center

Mizell, Al P.; And Others

Nova University (Florida), offers off-campus undergraduate and graduate degree programs in education, business and public administration, psychology, and computer sciences. This paper describes one of these offerings, the Application of Technology to Education and Training (APTEC) specialization in the Ed.D. program in Child and Youth Studies…

Technology and Motor Ability Development

ERIC Educational Resources Information Center

Wang, Lin; Lang, Yong; Luo, Zhongmin

2014-01-01

As a new member joining the technology family, active video games have been developed to promote physical exercise. This working-in-progress paper shares an ongoing project on examining the basic motor abilities that are enhanced through participating in commercially available active video games. [For the full proceedings see ED557181.

ENVIRONMENTAL TECHNOLOGY VERIFICATION--FUELCELL ENERGY, INC.: DFC 300A MOLTEN CARBONATE FUEL CELL COMBINED HEAT AND POWER SYSTEM

EPA Science Inventory

The U.S. EPA operates the Environmental Technology Verification program to facilitate the deployment of innovative technologies through performance verification and information dissemination. A technology area of interest is distributed electrical power generation, particularly w...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - GROUNDWATER SAMPLING TECHNOLOGIES - QED ENVIRONMENTAL SYSTEMS INC. WELL WIZARD DEDICATED SAMPLING SYSTEM

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

Environmental Technology Verification: Baghouse Filtration Products--Sinoma Science & Technology Co. Ltd FT-806 Filtration Media

EPA Science Inventory

EPA created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. It seeks to achieve this goal by providing high-quality, peer r...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOPROBE INC., PNEUMATIC BLADDER PUMP GW 1400 SERIES

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) design efficient processes for conducting has created the Environmental Technology perfofl1lance tests of innovative technologies. Verification Program (E TV) to facilitate the deployment of innovative or improved environmental techn...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOPROBE INC, MECHANICAL BLADDER PUMP MODEL MP470

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) design efficient processes for conducting has created the Environmental Technology perfofl1lance tests of innovative technologies. Verification Program (E TV) to facilitate the deployment of innovative or improved environmental techn...

New Technological Interventions in Conservation Conflicts: Countering Emotions and Contested Knowledge.

PubMed

Verma, Audrey; van der Wal, René; Fischer, Anke

2017-01-01

New technologies have increasingly featured in environmental conservation conflicts. We examined the deployment of imaging devices such as sonar equipment and cameras to survey the Fal estuary in Cornwall, UK. Due to heavy use of these waters, there have been several disputes coalescing around protected marine features, including the estuary's rare maerl beds. A comparison of two cases, scallop dredging and docks development, showed technical instruments being deployed to produce information about the marine environment as evidence to inform decision-making. The use of imaging devices stimulated political action and was regarded as a move away from emotion-based decision-making towards desired objectivity. Simultaneously, however, the process of deploying these devices was challenged and there was recognition that the resultant information could be used to construct the estuary as a politically charged space. Thus, rather than clarifying and resolving contentious issues, technological interventions generated new baselines for knowledge contestation and amplified ongoing battles for credibility and authority.

Next Generation Polar Seismic Instrumentation Challenges

NASA Astrophysics Data System (ADS)

Parker, T.; Beaudoin, B. C.; Gridley, J.; Anderson, K. R.

2011-12-01

Polar region logistics are the limiting factor for deploying deep field seismic arrays. The IRIS PASSCAL Instrument Center, in collaboration with UNAVCO, designed and deployed several systems that address some of the logistical constraints of polar deployments. However, continued logistics' pressures coupled with increasingly ambitious science projects require further reducing the logistics required for deploying both summer and over winter stations. Our focus is to reduce station power requirements and bulk, thereby minimizing the time and effort required to deploy these arrays. We will reduce the weight of the battery bank by incorporating the most applicable new high energy-density battery technology. Using these batteries will require a completely new power management system along with an appropriate smart enclosure. The other aspect will be to integrate the digitizing system with the sensor. Both of these technologies should reduce the install time and shipping volume plus weight while reducing some instrument costs. We will also continue work on an effective Iridium telemetry solution for automated data return. The costs and limitations of polar deep-field science easily justifies a specialized development effort but pays off doubly in that we will continue to leverage the advancements in reduced logistics and increased performance for the benefit of low-latitude seismic research.

Yttria-Stabilized Zirconia Ceramic Deposition on SS430 Ferritic Steel Grown by PLD - Pulsed Laser Deposition Method

NASA Astrophysics Data System (ADS)

Khalid Rivai, Abu; Mardiyanto; Agusutrisno; Suharyadi, Edi

2017-01-01

Development of high temperature materials are one of the key issues for the deployment of advanced nuclear reactors due to higher temperature operation. One of the candidate materials for that purpose is ceramic-coated ferritic steel that one of the functions is to be a thermal barrier coating (TBC). Thin films of YSZ (Ytrria-Stabilized Zirconia) ceramic have been deposited on a SS430 ferritic steel using Pulsed Laser Deposition (PLD) at Center For Science and Technology of Advanced Materials laboratory - National Nuclear Energy Agency of Indonesia (BATAN). The thin film was deposited with the chamber pressure range of 200-225 mTorr, the substrate temperature of 800oC, and the number of laser shots of 3×104, 6×104 and 9×104. Afterward, the samples were analyzed using Scanning Electron Microscope - Energy Dispersive X-ray Spectroscope (SEM-EDS), X-Ray Diffractometer (XRD), Atomic Force Microscope (AFM) and Vickers hardness tester. The results showed that the YSZ could homogeneously and sticky deposited on the surface of the ferritic steel. The surfaces were very smoothly formed with the surface roughness was in the range of 70 nm. Furthermore, thickness, composition of Zr4+ dan Y3+, the crystallinity, and hardness property was increased with the increasing the number of the shots.

Thin Film Technology Development for the Powersphere

NASA Technical Reports Server (NTRS)

Simburger, Edward J.; Matsumoto, James H.; Giants, Thomas W.; Garcia, Alexander, III; Liu, Simon; Rawal, Suraj P.; Perry, Alan R.; Marshall, Craig H.; Lin, John K.; Scarborough, Stephen;

Effects of Deployment Investment on the Growth of the Biofuels Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimmerstedt, Laura J.; Bush, Brian W.

2013-12-01

In support of the national goals for biofuel use in the United States, numerous technologies have been developed that convert biomass to biofuels. Some of these biomass to biofuel conversion technology pathways are operating at commercial scales, while others are in earlier stages of development. The advancement of a new pathway toward commercialization involves various types of progress, including yield improvements, process engineering, and financial performance. Actions of private investors and public programs can accelerate the demonstration and deployment of new conversion technology pathways. These investors (both private and public) will pursue a range of pilot, demonstration, and pioneer scalemore » biorefinery investments; the most cost-effective set of investments for advancing the maturity of any given biomass to biofuel conversion technology pathway is unknown. In some cases, whether or not the pathway itself will ultimately be technically and financially successful is also unknown. This report presents results from the Biomass Scenario Model -- a system dynamics model of the biomass to biofuels system -- that estimate effects of investments in biorefineries at different maturity levels and operational scales. The report discusses challenges in estimating effects of such investments and explores the interaction between this deployment investment and a volumetric production incentive. Model results show that investments in demonstration and deployment have a substantial positive effect on the development of the biofuels industry. Results also show that other conditions, such as supportive policies, have major impacts on the effectiveness of such investments.« less

High Altitude Supersonic Decelerator Test Vehicle

NASA Technical Reports Server (NTRS)

Cook, Brant T.; Blando, Guillermo; Kennett, Andrew; Von Der Heydt, Max; Wolff, John Luke; Yerdon, Mark

2013-01-01

The Low Density Supersonic Decelerator (LDSD) project is tasked by NASA's Office of the Chief Technologist (OCT) to advance the state of the art in Mars entry and descent technology in order to allow for larger payloads to be delivered to Mars at higher altitudes with better accuracy. The project will develop a 33.5 m Do Supersonic Ringsail (SSRS) parachute, 6m attached torus, robotic class Supersonic Inflatable Aerodynamic Decelerator (SIAD-R), and an 8 m attached isotensoid, exploration class Supersonic Inflatable Aerodynamic Decelerator (SIAD-E). The SSRS and SIAD-R should be brought to TRL-6, while the SIAD-E should be brought to TRL-5. As part of the qualification and development program, LDSD must perform a Mach-scaled Supersonic Flight Dynamics Test (SFDT) in order to demonstrate successful free flight dynamic deployments at Mars equivalent altitude, of all three technologies. In order to perform these tests, LDSD must design and build a test vehicle to deliver all technologies to approximately 180,000 ft and Mach 4, deploy a SIAD, free fly to approximately Mach 2, deploy the SSRS, record high-speed and high-resolution imagery of both deployments, as well as record data from an instrumentation suite capable of characterizing the technology induced vehicle dynamics. The vehicle must also be recoverable after splashdown into the ocean under a nominal flight, while guaranteeing forensic data protection in an off nominal catastrophic failure of a test article that could result in a terminal velocity, tumbling water impact.

Engineers Jim Murray and Joe Pahle prepare a deployable, inflatable wing technology demonstrator exp

NASA Technical Reports Server (NTRS)

2001-01-01

Engineers Jim Murray and Joe Pahle prepare a deployable, inflatable wing technology demonstrator experiment flown by the NASA Dryden Flight Research Center, Edwards, California. The inflatable wing project represented a basic flight research effort by Dryden personnel. Three successful flights of the I2000 inflatable wing aircraft occurred. During the flights, the team air-launched the radio-controlled (R/C) I2000 from an R/C utility airplane at an altitude of 800-1000 feet. As the I2000 separated from the carrier aircraft, its inflatable wings 'popped-out,' deploying rapidly via an on-board nitrogen bottle. The aircraft remained stable as it transitioned from wingless to winged flight. The unpowered I2000 glided down to a smooth landing under complete control.

The I2000, a deployable, inflatable wing technology demonstrator experiment aircraft, leaves the gro

NASA Technical Reports Server (NTRS)

2001-01-01

The deployable, inflatable wing technology demonstrator experiment aircraft leaves the ground during a flight conducted by the NASA Dryden Flight Research Center, Edwards, California. The inflatable wing project represented a basic flight research effort by Dryden personnel. Three successful flights of the I2000 inflatable wing aircraft occurred. During the flights, the team air-launched the radio-controlled (R/C) I2000 from an R/C utility airplane at an altitude of 800-1000 feet. As the I2000 separated from the carrier aircraft, its inflatable wings 'popped-out,' deploying rapidly via an on-board nitrogen bottle. The aircraft remained stable as it transitioned from wingless to winged flight. The unpowered I2000 glided down to a smooth landing under complete control.

FLUIDIC: Metal Air Recharged

ScienceCinema

Friesen, Cody

2018-02-14

Fluidic, with the help of ARPA-E funding, has developed and deployed the world's first proven high cycle life metal air battery. Metal air technology, often used in smaller scale devices like hearing aids, has the lowest cost per electron of any rechargeable battery storage in existence. Deploying these batteries for grid reliability is competitive with pumped hydro installations while having the advantages of a small footprint. Fluidic's battery technology allows utilities and other end users to store intermittent energy generated from solar and wind, as well as maintain reliable electrical delivery during power outages. The batteries are manufactured in the US and currently deployed to customers in emerging markets for cell tower reliability. As they continue to add customers, they've gained experience and real world data that will soon be leveraged for US grid reliability.

Emergency Response and Protection Water Treatment Technologies

EPA Science Inventory

The Expeditionary Unit Water Purifier (EUWP) is supported and deployed by NFESC, the TARDEC, and the USBR. The EUWP was deployed to Biloxi, MS after Hurricane Katrina to supply potable water to a hospital, using seawater from the Gulf of Mexico as the source water. The EUWP ...

Connected vehicle pilot deployment program phase I : security management operational concept, Tampa Hillsborough Expressway Authority (THEA).

DOT National Transportation Integrated Search

2016-05-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to re...

Connected Vehicle Pilot Deployment Program Phase 1, Performance Measurement and Evaluation Support Plan – ICF/Wyoming.

DOT National Transportation Integrated Search

2016-06-06

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Vehicle safety : technologies, challenges, and research and development expenditures for advanced air bags

DOT National Transportation Integrated Search

2001-06-01

One hundred seventy five fatalities - primarily children and small women - have been attributed to the deployment of an air bag in relatively low-speed crashes as of April 2001. Advanced air bag systems tailor the deployment of the bags to the charac...

Sandia National Laboratories: Sandia National Laboratories: Missions:

Science.gov Websites

; Security Weapons Science & Technology Defense Systems & Assessments About Defense Systems & ; Development Technology Deployment Centers Working With Sandia Working With Sandia Prospective Suppliers What Information Construction & Facilities Contract Audit Sandia's Economic Impact Licensing & Technology

Sandia National Laboratories: National Security Missions: International

Science.gov Websites

; Security Weapons Science & Technology Defense Systems & Assessments About Defense Systems & ; Development Technology Deployment Centers Working With Sandia Working With Sandia Prospective Suppliers What Information Construction & Facilities Contract Audit Sandia's Economic Impact Licensing & Technology

An empirical/theoretical model with dimensionless numbers to predict the performance of electrodialysis systems on the basis of operating conditions.

PubMed

Karimi, Leila; Ghassemi, Abbas

2016-07-01

Among the different technologies developed for desalination, the electrodialysis/electrodialysis reversal (ED/EDR) process is one of the most promising for treating brackish water with low salinity when there is high risk of scaling. Multiple researchers have investigated ED/EDR to optimize the process, determine the effects of operating parameters, and develop theoretical/empirical models. Previously published empirical/theoretical models have evaluated the effect of the hydraulic conditions of the ED/EDR on the limiting current density using dimensionless numbers. The reason for previous studies' emphasis on limiting current density is twofold: 1) to maximize ion removal, most ED/EDR systems are operated close to limiting current conditions if there is not a scaling potential in the concentrate chamber due to a high concentration of less-soluble salts; and 2) for modeling the ED/EDR system with dimensionless numbers, it is more accurate and convenient to use limiting current density, where the boundary layer's characteristics are known at constant electrical conditions. To improve knowledge of ED/EDR systems, ED/EDR models should be also developed for the Ohmic region, where operation reduces energy consumption, facilitates targeted ion removal, and prolongs membrane life compared to limiting current conditions. In this paper, theoretical/empirical models were developed for ED/EDR performance in a wide range of operating conditions. The presented ion removal and selectivity models were developed for the removal of monovalent ions and divalent ions utilizing the dominant dimensionless numbers obtained from laboratory scale electrodialysis experiments. At any system scale, these models can predict ED/EDR performance in terms of monovalent and divalent ion removal. Copyright © 2016 Elsevier Ltd. All rights reserved.