Reclamation of mosquito breeding sites using Landsat-8 remote sensing data: A case study of Birnin Kebbi, Nigeria

NASA Astrophysics Data System (ADS)

Amusuk, Danboyi Joseph; Hashim, Mazlan; Beiranvand Pour, Amin

2016-06-01

It is believed by recent releases of World Health Organization (WHO) that more than half of the world's population (3.2 billion) live in areas that are at risk of malaria transmission. Although increased efforts are dramatically reducing the malaria burden in some places where the rate of new cases indicates a fall by 37% globally and 60% death rate. Unfortunately, the subSaharan Africa still shares 89% of malaria and 91% of malaria deaths. Essentially, attacking the causative vectors and reclamation of the vector breeding sites could be remarkable for the rolling back the malaria epidemic project. Consequently, it is essential to explore the possibility of using recent Landsat-8 data remote sensing data and applications of Geographic Information System (GIS) technique in contributing to the realization of this objective. This investigation used for identifying mosquito breeding habitat (Derelict Ponds) zones the application of supervised classification of the Landsat-8 image in conjunction with GIS layering which allowed identification of high risk prone regions for mosquito breeding habitat. The methodology delineated 10 spatial locations of the Derelict Ponds (DP) spread around the Birnin Kebbi urban environment. Moreover, the results combined with comparative analysis of the link between warm climatic (temperature and rainfall data) conditions and Malaria prevalence that is associated with urban poverty. This study indicates that the application of Landsat-8 data and GIS techniques can be a useful tool for planning and management of environmental health and mapping of hot spot environmental problem areas.

How multiagency partnerships can successfully address large-scale pollution problems: a Hawaii case study.

PubMed

Donohue, Mary J

2003-06-01

Oceanic circulation patterns deposit significant amounts of marine pollution, including derelict fishing gear from North Pacific Ocean fisheries, in the Hawaiian Archipelago [Mar. Pollut. Bull. 42(12) (2001) 1301]. Management responsibility for these islands and their associated natural resources is shared by several government authorities. Non-governmental organizations (NGOs) and private industry also have interests in the archipelago. Since the marine debris problem in this region is too large for any single agency to manage, a multiagency marine debris working group (group) was established in 1998 to improve marine debris mitigation in Hawaii. To date, 16 federal, state, and local agencies, working with industry and NGOs, have removed 195 tons of derelict fishing gear from the Northwestern Hawaiian Islands. This review details the evolution of the partnership, notes its challenges and rewards, and advocates its continued use as an effective resource management tool.

Protected areas mitigate diseases of reef-building corals by reducing damage from fishing.

PubMed

Lamb, Joleah B; Williamson, David H; Russ, Garry R; Willis, Bette L

2015-09-01

Parks and protected areas have been instrumental in reducing anthropogenic sources of damage in terrestrial and aquatic environments. Pathogen invasion often succeeds physical wounding and injury, yet links between the reduction of damage and the moderation of disease have not been assessed. Here, we examine the utility of no-take marine reserves as tools for mitigating diseases that affect reef-building corals. We found that sites located within reserves had fourfold reductions in coral disease prevalence compared to non-reserve sites (80466 corals surveyed). Of 31 explanatory variables assessed, coral damage and the abundance of derelict fishing line best explained differences in disease assemblages between reserves and non-reserves. Unexpectedly, we recorded significantly higher levels of disease, coral damage, and derelict fishing line in non-reserves with fishing gear restrictions than in those without gear restrictions. Fishers targeting stocks perceived to be less depleted, coupled with enhanced site access from immediately adjacent boat moorings, may explain these unexpected patterns. Significant correlations between the distance from mooring sites and prevalence values for a ciliate disease known to infest wounded tissue (r = -0.65), coral damage (r = -0.64), and the abundance of derelict fishing line (r = -0.85) corroborate this interpretation. This is the first study to link disease with recreational use intensity in a park, emphasizing the need to evaluate the placement of closures and their direct relationship to ecosystem health. Since corals are modular, ecological processes that govern reproductive and competitive fitness are frequently related to colony surface area therefore, even low levels of cumulative tissue loss from progressing diseases pose significant threats to reef coral persistence. Disease mitigation through reductions in physical injury in areas where human activities are concentrated is another mechanism by which protected areas may improve ecosystem resilience in a changing climate.

Human resources for health through conflict and recovery: lessons from African countries.

PubMed

Pavignani, Enrico

2011-10-01

A protracted conflict affects human resources for health (HRH) in multiple ways. In most cases, the inflicted damage constitutes the main obstacle to health sector recovery. Interventions aimed at healing derelict human resources are however fraught with difficulties of a political, technical, financial and administrative order. The experience accumulated in past recovery processes has made some important players aware of the cost incurred by neglecting human resource development. Several transitions from conflict to peace have been documented, even if largely in unpublished reports. This paper presents condensed descriptions of some African HRH-related recovery processes, which provide useful lessons. The technical work demanded to resuscitate a derelict health workforce is fairly well understood. In most situations, the highest hurdles lie outside of the health domain, and are of a political and administrative nature. Success stories are rare. But useful lessons are taught by failure as well as by success. © 2011 The Author(s). Disasters © Overseas Development Institute, 2011.

GhostNet marine debris survey in the Gulf of Alaska--satellite guidance and aircraft observations.

PubMed

Pichel, William G; Veenstra, Timothy S; Churnside, James H; Arabini, Elena; Friedman, Karen S; Foley, David G; Brainard, Russell E; Kiefer, Dale; Ogle, Simeon; Clemente-Colón, Pablo; Li, Xiaofeng

2012-01-01

Marine debris, particularly debris that is composed of lost or abandoned fishing gear, is recognized as a serious threat to marine life, vessels, and coral reefs. The goal of the GhostNet project is the detection of derelict nets at sea through the use of weather and ocean models, drifting buoys and satellite imagery to locate convergent areas where nets are likely to collect, followed by airborne surveys with trained observers and remote sensing instruments to spot individual derelict nets. These components of GhostNet were first tested together in the field during a 14-day marine debris survey of the Gulf of Alaska in July and August 2003. Model, buoy, and satellite data were used in flight planning. A manned aircraft survey with visible and IR cameras and a LIDAR instrument located debris in the targeted locations, including 102 individual pieces of debris of anthropogenic or terrestrial origin. Published by Elsevier Ltd.

Amount and type of derelict gear from the declining black pearl oyster aquaculture in Ahe atoll lagoon, French Polynesia.

PubMed

Andréfouët, Serge; Thomas, Yoann; Lo, Cedrik

2014-06-15

Pearl oyster aquaculture is a major activity in French Polynesia atoll lagoons. After the economic decline that characterized the last decade, concerns recently rose about discarded installations and materials that supported aquaculture practices and by facilities abandoned after they had to close their activities. In May 2013, a first inventory of the type and amount of pearl farms derelict gear (PFDG) was achieved on 47 sites in Ahe lagoon. Surveys were conducted within and outside the boundaries of aquaculture concessions. Twenty types of PFDG littered the lagoon floor and the water column. The most impacted areas were near abandoned grafting houses with up to nine types of PFDG. Forty-five percent of the sites were impacted, including outside concessions. While management authorities are fully aware of the problem, this first assessment is a wake-up call to stimulate the cleaning of lagoons, enhance awareness among farmers, and identify potential ecological consequences on lagoon ecosystems. Copyright © 2014 Elsevier Ltd. All rights reserved.

Submarine canyons along the upper Sardinian slope (Central Western Mediterranean) as repositories for derelict fishing gears.

PubMed

Cau, Alessandro; Alvito, Andrea; Moccia, Davide; Canese, Simonepietro; Pusceddu, Antonio; Rita, Cannas; Angiolillo, Michela; Follesa, Maria C

2017-10-15

By means of ROV surveys, we assessed the quantity, composition and bathymetric distribution of marine litter in 17 sites along the Sardinian continental margin (Central Western Mediterranean) at depths ranging from 100 to 480m. None of the investigated sites was litter free, but the mean density of litter (0.0175±0.0022itemsm -2 ) was lower than that reported from other Tyrrhenian regions. The difference in the total litter density among sites was negligible, but the density of derelict fishing gear (DFG) items (most of which ascribable to small scale fishery) in submarine canyons was higher in submarine canyons than in other habitats. Our result suggest that submarine canyons (known to be highly vulnerable ecosystems) act as major repositories of DFGs, and, therefore, we anticipate the need of specific measures aimed at minimizing the loss and abandonment of DFGs in submarine canyons. Copyright © 2017 Elsevier Ltd. All rights reserved.

Out of sight but not out of mind: harmful effects of derelict traps in selected U.S. coastal waters.

PubMed

Arthur, Courtney; Sutton-Grier, Ariana E; Murphy, Peter; Bamford, Holly

2014-09-15

There is a paucity of data in the published literature on the ecological and economic impacts of derelict fishing traps (DFTs) in coastal ecosystems. We synthesized results from seven NOAA-funded trap fisheries studies around the United States and determined that DFT-caused losses to habitat and harvestable annual catch are pervasive, persistent, and largely preventable. Based on this synthesis, we identified key gaps to fill in order to better manage and prevent DFTs. We conclude with suggestions for developing a U.S. DFT management strategy including: (1) targeting studies to estimate mortality of fishery stocks, (2) assessing the economic impacts of DFTs on fisheries, (3) collaborating with the fishing industry to develop solutions to ghost fishing, and (4) examining the regional context and challenges resulting in DFTs to find effective policy solutions to manage, reduce, and prevent gear loss. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

At-sea detection of derelict fishing gear in the North Pacific: an overview.

PubMed

Morishige, Carey; McElwee, Kris

2012-01-01

There are numerous known impacts of derelict fishing gear (DFG) to marine ecosystems and safe navigation around the world. To mitigate these impacts, the preemptive detection and removal of DFG at sea are being pursued. This special issue focuses on the North Pacific Ocean because of historic and ongoing research on DFG in the area, particularly as it relates to the Hawaiian Archipelago. In order to develop an effective detection strategy, information and expertise from three disciplines must be integrated: marine debris, oceanography, and remote sensing technology. Building upon results and discussions during a workshop held in December 2008, this special issue provides both results of original research and review papers, pursuing each discipline as it relates to DFG and outlining a multi-faceted strategy to effectively detect DFG at sea. This strategy serves as a roadmap, taking us closer to realizing the goal of detecting and removing DFG at sea. Copyright © 2011 Elsevier Ltd. All rights reserved.

A strategy for detecting derelict fishing gear at sea.

PubMed

McElwee, Kris; Donohue, Mary J; Courtney, Catherine A; Morishige, Carey; Rivera-Vicente, Ariel

2012-01-01

Derelict fishing gear (DFG) is a highly persistent form of marine pollution known to cause environmental and economic damage. At-sea detection of DFG would support pelagic removal of this gear to prevent and minimize impacts on marine environments and species. In 2008, experts in marine debris, oceanography, remote sensing, and marine policy outlined a strategy to develop the capability to detect and ultimately remove DFG from the open ocean. The strategy includes three interrelated components: understanding the characteristics of the targeted DFG, indirectly detecting DFG by modeling likely locations, and directly detecting pelagic DFG using remote sensing. Together, these components aim to refine the search area, increase the likelihood of detection, and decrease mitigation response time, thereby providing guidance for removal operations. Here, we present this at-sea detection strategy, relate it to relevant extant research and technology, and identify gaps that currently prevent successful at-sea detection and removal of DFG. Copyright © 2011 Elsevier Ltd. All rights reserved.

Navigational threats by derelict fishing gear to navy ships in the Korean seas.

PubMed

Hong, Sunwook; Lee, Jongmyoung; Lim, Sehan

2017-06-30

This study assessed the impact of derelict fishing gear (DFG) on navigation. The Republic of Korea's navy (ROKN) recorded every case of approximately 170 naval ships associated with propeller entanglement by DFG from January 2010 to December 2015. The frequency of cases was 2.3 per ship and 397.7 (±37.5) per year. The amount of DFG disentangled was 0.025tons per ship and 10.0 (±1.7) tons per year. The frequency temporally decreased whereas the amount increased over these six years. To disentangle propellers, 3.1 divers were needed on average per case. Propeller entanglement occurred in all local seas and some of these areas showed increases over time. Our study highlights that the impact of DFG on navigational threats has been persistent and ubiquitous and can potentially be reduced by preventing DFG in fishing areas, with a focus on improved management by fishermen and government and with more efficient retrieval of DFG. Copyright © 2017. Published by Elsevier Ltd.

32 CFR 69.5 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Responsibilities. The Assistant Secretary of Defense for Force Management Policy (ASD (FMP)), under the Under... board or Superintendent to ASD(FMP). The ASD(FMP) shall make the final decision on all formal appeals... Director, DoD DDESS. (6) School board members may be removed by the ASD (FMP) for dereliction of duty...

32 CFR 69.5 - Responsibilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Responsibilities. The Assistant Secretary of Defense for Force Management Policy (ASD (FMP)), under the Under... board or Superintendent to ASD(FMP). The ASD(FMP) shall make the final decision on all formal appeals... Director, DoD DDESS. (6) School board members may be removed by the ASD (FMP) for dereliction of duty...

Share One Way Resilience Can Make A Difference In Your City

EPA Science Inventory

The Proctor Creek neighborhood in Atlanta is a poor, mostly African American community plagued by flooding, derelict housing, mold, and pathogens in the creek. Tires found in the creek bear the mark of municipal service vehicles. The area is prey to extreme heat and environmenta...

Short-Stay Residential Experience: Residential Work by Secondary School Pupils.

ERIC Educational Resources Information Center

Schools Council, London (England).

Most secondary schools in Great Britain today have implemented residential courses. They have built, bought, or adapted premises ranging from derelict colleges to country houses for use as residential centers where students may spend from a few days to several weeks studying, working, or learning to use leisure time. This publication examines…

Dereliction of Duty: Florida's Failed Education Policy. Special Report

ERIC Educational Resources Information Center

Pathak, Arohi

2004-01-01

Education is a fundamental value of the people of Florida, whose state constitution even calls for a "high-quality system of free public schools." But rather than live up to this commitment, the state--led by Governor Jeb Bush and a Republican legislature--has embarked on a series of programs that undermine public education. This report examines…

Pay Me Now or Pay Me More Later: Start the Development of Active Orbital Debris Removal Now

NASA Astrophysics Data System (ADS)

McKnight, D.

2010-09-01

The objective of this paper is to examine when the aerospace community should proceed to develop and deploy active debris removal solutions. A two-prong approach is taken to examine both (1) operational hazard thresholds and (2) economic triggers. Research in the paper reinforces work by previous investigators that show accurately determining a hazard metric, and an appropriate threshold for that metric that triggers an imperative to implement active debris removal options, is difficult to formulate. A new operational hazard threshold defined by the doubling of the “lethal” debris environment coupled with the threshold that would affect insurance premiums is disclosed for the first time. The doubling of the lethal hazard at 850km and the annual probability of collision in the 650-1000km region may both occur as early as 2035. A simple static (i.e. no temporal dimension) economic threshold is derived that provides the clearest indicator that active debris removal solutions development and deployment should start immediately. This straightforward observation is based on the fact that it will always be at least an order of magnitude less expensive, quicker to execute, and operationally beneficial to remove mass from orbit as one large (several thousand kilograms) object rather than as the result of tens of thousands of fragments that would be produced from a catastrophic collision. Additionally, the ratio of lethal fragments to trackable objects is only ~1,000x yet there is a need for the collection efficiency to be ~10,000x so “sweeping” of lethal fragments is not viable. The practicality of the large object removal is tempered by the observation that one may have to remove ~10-50x derelict objects to prevent a single collision. This fact forces the imperative that removal needs to start now due to the delays that will be necessary not only to perfect/deploy approaches to debris removal and establish supporting policies/regulations but also because of the time it takes for the actions to reap benefits. Additionally, if the growth of the lethal hazard grows faster than anticipated it may be necessary to replace some satellites, execute large object removal, and perform medium debris (i.e. lethal fragments) sweeping operations. The sooner the community starts to remove large derelict objects, the more likely satellite damage will be minimized and the less likely that medium debris sweeping will have to be implemented. While the research is focused on starting debris removal, the ensemble of observations reinforces the need to continue to push for as close to 100% compliance to debris mitigation guidelines as possible. This analysis is unique in its pragmatic application of advanced probability concepts, merging of space hazard assessments with space insurance thresholds, and the use of general risk management concepts on the orbital debris hazard control process. It is hoped that this paper provides an impetus for spacefaring organizations to start to actively pursue development and deployment of debris removal solutions and policies.

Satellite-Respondent Buoys Identify Ocean Debris

NASA Technical Reports Server (NTRS)

2009-01-01

NASA operates a series of Earth-observing satellites, which help scientists learn more about our home planet. Through partnerships with universities and other government agencies, like the National Oceanic and Atmospheric Administration (NOAA), the Space Agency helps scientists around the world capture precise movements of the Earth s crust to learn more about the underground processes related to earthquakes and volcanic eruptions, create accurate assessments of wind resources for future energy use, and preserve endangered species by generating much-needed data about their environments. This work, done primarily from space with satellites using a variety of complex instruments to take readings of the surface below, generates leagues of valuable data that aid scientists on the ground - or in some cases on the water. As much of the Earth is covered in water liquid, frozen, saltwater, or fresh much of NASA s remote sensing work focuses on the oceans and their health. This valuable, mammoth (yet fragile) resource provides insight into the overall health of our planet, as water, in addition to being abundant, is a key ingredient to all known life on Earth. As part of its ocean-observing work, NASA partnered with NOAA and private industry to develop remote sensing technologies for protecting the seas of the North Pacific from a nefarious and pervasive problem: derelict fishing gear.

The Springfield Technical Community College Technology Park--A Creative Use of Real Estate: Converting a Derelict Property into an Economic Development Engine

ERIC Educational Resources Information Center

McCabe, Setta

2005-01-01

When Digital Equipment Corporation announced the closing of its facility in Springfield, Massachusetts, the result would have been a vacant 15-acre facility on the main thoroughfare of the city center, as well as the loss of 1,000 local jobs. Instead, through a collaborative effort led by the local community college, this historic site is now the…

Civil-Military Relations: From Vietnam to Operation Iraqi Freedom

DTIC Science & Technology

2009-05-01

Robert F. Baumann, Ph.D. Graduate Degree Programs ii Abstract CIVIL-MILITARY RELATIONS: FROM VIETNAM TO OPERATION IRAQI FREEDOM by MAJOR Brandon...Oxford: Oxford University Press, 2007), 285-324. 43 Ibid. 44 Robert M. Gates, 2008 National Defense Strategy (Washington D.C.: Department Of Defense...Dereliction of Duty: Lyndon Johnson, Robert McNamara, the Joint Chiefs of Staff, and the Lies That Led to Vietnam (New York: HarperCollins, 1997), 13. 60

New objects do not capture attention without a sensory transient.

PubMed

Hollingworth, Andrew; Simons, Daniel J; Franconeri, Steven L

2010-07-01

Attention capture occurs when a stimulus event involuntarily recruits attention. The abrupt appearance of a new object is perhaps the most well-studied attention-capturing event, yet there is debate over the root cause of this capture. Does a new object capture attention because it involves the creation of a new object representation or because its appearance creates a characteristic luminance transient? The present study sought to resolve this question by introducing a new object into a search display, either with or without a unique luminance transient. Contrary to the results of a recent study (Davoli, Suszko, & Abrams, 2007), when the new object's transient was masked by a brief interstimulus interval introduced between the placeholder and search arrays, a new object did not capture attention. Moreover, when a new object's transient was masked, participants could not locate a new object efficiently even when that was their explicit goal. Together, these data suggest that luminance transient signals are necessary for attention capture by new objects.

The Collision of Iridium 33 and Cosmos 2251: The Shape of Things to Come

NASA Technical Reports Server (NTRS)

Nicholas, Johnson

2009-01-01

The collision of Iridium 33 and Cosmos 2251 was the most severe accidental fragmentation on record. More than 1800 debris approx. 10 cm and larger were produced. If solar activity returns to normal, half of the tracked debris will reenter within five years. Less than 60 cataloged debris had reentered by 1 October 2009. Some debris from both satellites will remain in orbit through the end of the century. The collision rate of one every five years will increase without future removal of large derelict spacecraft and launch vehicle orbital stages.

Perceptual organization, visual attention, and objecthood.

PubMed

Kimchi, Ruth; Yeshurun, Yaffa; Spehar, Branka; Pirkner, Yossef

2016-09-01

We have previously demonstrated that the mere organization of some elements in the visual field into an object attracts attention automatically. Here, we explored three different aspects of this automatic attentional capture: (a) Does the attentional capture by an object involve a spatial component? (b) Which Gestalt organization factors suffice for an object to capture attention? (c) Does the strength of organization affect the object's ability to capture attention? Participants viewed multi-elements displays and either identified the color of one element or responded to a Vernier target. On some trials, a subset of the elements grouped by Gestalt factors into an object that was irrelevant to the task and not predictive of the target. An object effect - faster performance for targets within the object than for targets outside the object - was found even when the target appeared after the object offset, and was sensitive to target-object distance, suggesting that the capture of attention by an object is accompanied by a deployment of attention to the object location. Object effects of similar magnitude were found for objects grouped by a combination of factors (collinearity, closure, and symmetry, or closure and symmetry) or by a single factor when it was collinearity, but not symmetry, suggesting that collinearity, or closure combined with symmetry, suffices for automatic capture of attention by an object, but symmetry does not. Finally, the strength of grouping in modal completion, manipulated by varying contrast polarity between and within elements, affected the effectiveness of the attentional capture by the induced object. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Mixed-Method Approach for Quantifying Illegal Fishing and Its Impact on an Endangered Fish Species.

PubMed

Free, Christopher M; Jensen, Olaf P; Mendsaikhan, Bud

2015-01-01

Illegal harvest is recognized as a widespread problem in natural resource management. The use of multiple methods for quantifying illegal harvest has been widely recommended yet infrequently applied. We used a mixed-method approach to evaluate the extent, character, and motivations of illegal gillnet fishing in Lake Hovsgol National Park, Mongolia and its impact on the lake's fish populations, especially that of the endangered endemic Hovsgol grayling (Thymallus nigrescens). Surveys for derelict fishing gear indicate that gillnet fishing is widespread and increasing and that fishers generally use 3-4 cm mesh gillnet. Interviews with resident herders and park rangers suggest that many residents fish for subsistence during the spring grayling spawning migration and that some residents fish commercially year-round. Interviewed herders and rangers generally agree that fish population sizes are decreasing but are divided on the causes and solutions. Biological monitoring indicates that the gillnet mesh sizes used by fishers efficiently target Hovsgol grayling. Of the five species sampled in the monitoring program, only burbot (Lota lota) showed a significant decrease in population abundance from 2009-2013. However, grayling, burbot, and roach (Rutilus rutilus) all showed significant declines in average body size, suggesting a negative fishing impact. Data-poor stock assessment methods suggest that the fishing effort equivalent to each resident family fishing 50-m of gillnet 11-15 nights per year would be sufficient to overexploit the grayling population. Results from the derelict fishing gear survey and interviews suggest that this level of effort is not implausible. Overall, we demonstrate the ability for a mixed-method approach to effectively describe an illegal fishery and suggest that these methods be used to assess illegal fishing and its impacts in other protected areas.

A Mixed-Method Approach for Quantifying Illegal Fishing and Its Impact on an Endangered Fish Species

PubMed Central

Free, Christopher M.; Jensen, Olaf P.; Mendsaikhan, Bud

2015-01-01

Illegal harvest is recognized as a widespread problem in natural resource management. The use of multiple methods for quantifying illegal harvest has been widely recommended yet infrequently applied. We used a mixed-method approach to evaluate the extent, character, and motivations of illegal gillnet fishing in Lake Hovsgol National Park, Mongolia and its impact on the lake’s fish populations, especially that of the endangered endemic Hovsgol grayling (Thymallus nigrescens). Surveys for derelict fishing gear indicate that gillnet fishing is widespread and increasing and that fishers generally use 3–4 cm mesh gillnet. Interviews with resident herders and park rangers suggest that many residents fish for subsistence during the spring grayling spawning migration and that some residents fish commercially year-round. Interviewed herders and rangers generally agree that fish population sizes are decreasing but are divided on the causes and solutions. Biological monitoring indicates that the gillnet mesh sizes used by fishers efficiently target Hovsgol grayling. Of the five species sampled in the monitoring program, only burbot (Lota lota) showed a significant decrease in population abundance from 2009–2013. However, grayling, burbot, and roach (Rutilus rutilus) all showed significant declines in average body size, suggesting a negative fishing impact. Data-poor stock assessment methods suggest that the fishing effort equivalent to each resident family fishing 50-m of gillnet 11–15 nights per year would be sufficient to overexploit the grayling population. Results from the derelict fishing gear survey and interviews suggest that this level of effort is not implausible. Overall, we demonstrate the ability for a mixed-method approach to effectively describe an illegal fishery and suggest that these methods be used to assess illegal fishing and its impacts in other protected areas. PMID:26625154

Size matters: large objects capture attention in visual search.

PubMed

Proulx, Michael J

2010-12-23

Can objects or events ever capture one's attention in a purely stimulus-driven manner? A recent review of the literature set out the criteria required to find stimulus-driven attentional capture independent of goal-directed influences, and concluded that no published study has satisfied that criteria. Here visual search experiments assessed whether an irrelevantly large object can capture attention. Capture of attention by this static visual feature was found. The results suggest that a large object can indeed capture attention in a stimulus-driven manner and independent of displaywide features of the task that might encourage a goal-directed bias for large items. It is concluded that these results are either consistent with the stimulus-driven criteria published previously or alternatively consistent with a flexible, goal-directed mechanism of saliency detection.

Remote Spacecraft Attitude Control by Coulomb Charging

NASA Astrophysics Data System (ADS)

Stevenson, Daan

The possibility of inter-spacecraft collisions is a serious concern at Geosynchronous altitudes, where many high-value assets operate in proximity to countless debris objects whose orbits experience no natural means of decay. The ability to rendezvous with these derelict satellites would enable active debris removal by servicing or repositioning missions, but docking procedures are generally inhibited by the large rotational momenta of uncontrolled satellites. Therefore, a contactless means of reducing the rotation rate of objects in the space environment is desired. This dissertation investigates the viability of Coulomb charging to achieve such remote spacecraft attitude control. If a servicing craft imposes absolute electric potentials on a nearby nonspherical debris object, it will impart electrostatic torques that can be used to gradually arrest the object's rotation. In order to simulate the relative motion of charged spacecraft with complex geometries, accurate but rapid knowledge of the Coulomb interactions is required. To this end, a new electrostatic force model called the Multi-Sphere Method (MSM) is developed. All aspects of the Coulomb de-spin concept are extensively analyzed and simulated using a system with simplified geometries and one dimensional rotation. First, appropriate control algorithms are developed to ensure that the nonlinear Coulomb torques arrest the rotation with guaranteed stability. Moreover, the complex interaction of the spacecraft with the plasma environment and charge control beams is modeled to determine what hardware requirements are necessary to achieve the desired electric potential levels. Lastly, the attitude dynamics and feedback control development is validated experimentally using a scaled down terrestrial testbed. High voltage power supplies control the potential on two nearby conductors, a stationary sphere and a freely rotating cylinder. The nonlinear feedback control algorithms developed above are implemented to achieve rotation rate and absolute attitude control. Collectively, these studies decisively validate the feasibility of Coulomb charging for remote spacecraft attitude control.

Small Orbital Stereo Tracking Camera Technology Development

NASA Technical Reports Server (NTRS)

Bryan, Tom; MacLeod, Todd; Gagliano, Larry

2017-01-01

Any exploration vehicle assembled or Spacecraft placed in LEO or GTO must pass through this debris cloud and survive. Large cross section, low thrust vehicles will spend more time spiraling out through the cloud and will suffer more impacts.Better knowledge of small debris will improve survival odds. Current estimated Density of debris at various orbital attitudes with notation of recent collisions and resulting spikes. Orbital Debris Tracking and Characterization has now been added to NASA Office of Chief Technologists Technology Development Roadmap in Technology Area 5 (TA5.7)[Orbital Debris Tracking and Characterization] and is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crews due to the risk of Orbital Debris damage to ISS Exploration vehicles. The Problem: Traditional orbital trackers looking for small, dim orbital derelicts and debris typically will stare at the stars and let any reflected light off the debris integrate in the imager for seconds, thus creating a streak across the image. The Solution: The Small Tracker will see Stars and other celestial objects rise through its Field of View (FOV) at the rotational rate of its orbit, but the glint off of orbital objects will move through the FOV at different rates and directions. Debris on a head-on collision course (or close) will stay in the FOV at 14 Km per sec. The Small Tracker can track at 60 frames per sec allowing up to 30 fixes before a near-miss pass. A Stereo pair of Small Trackers can provide range data within 5-7 Km for better orbit measurements.

Collaborative real-time scheduling of multiple PTZ cameras for multiple object tracking in video surveillance

NASA Astrophysics Data System (ADS)

Liu, Yu-Che; Huang, Chung-Lin

2013-03-01

This paper proposes a multi-PTZ-camera control mechanism to acquire close-up imagery of human objects in a surveillance system. The control algorithm is based on the output of multi-camera, multi-target tracking. Three main concerns of the algorithm are (1) the imagery of human object's face for biometric purposes, (2) the optimal video quality of the human objects, and (3) minimum hand-off time. Here, we define an objective function based on the expected capture conditions such as the camera-subject distance, pan tile angles of capture, face visibility and others. Such objective function serves to effectively balance the number of captures per subject and quality of captures. In the experiments, we demonstrate the performance of the system which operates in real-time under real world conditions on three PTZ cameras.

Multi-objective Extremum Seeking Control for Enhancement of Wind Turbine Power Capture with Load Reduction

NASA Astrophysics Data System (ADS)

Xiao, Yan; Li, Yaoyu; Rotea, Mario A.

2016-09-01

The primary objective in below rated wind speed (Region 2) is to maximize the turbine's energy capture. Due to uncertainty, variability of turbine characteristics and lack of inexpensive but precise wind measurements, model-free control strategies that do not use wind measurements such as Extremum Seeking Control (ESC) have received significant attention. Based on a dither-demodulation scheme, ESC can maximize the wind power capture in real time despite uncertainty, variabilities and lack of accurate wind measurements. The existing work on ESC based wind turbine control focuses on power capture only. In this paper, a multi-objective extremum seeking control strategy is proposed to achieve nearly optimum wind energy capture while decreasing structural fatigue loads. The performance index of the ESC combines the rotor power and penalty terms of the standard deviations of selected fatigue load variables. Simulation studies of the proposed multi-objective ESC demonstrate that the damage-equivalent loads of tower and/or blade loads can be reduced with slight compromise in energy capture.

Perceived shifts of flashed stimuli by visible and invisible object motion.

PubMed

Watanabe, Katsumi; Sato, Takashi R; Shimojo, Shinsuke

2003-01-01

Perceived positions of flashed stimuli can be altered by motion signals in the visual field-position capture (Whitney and Cavanagh, 2000 Nature Neuroscience 3 954-959). We examined whether position capture of flashed stimuli depends on the spatial relationship between moving and flashed stimuli, and whether the phenomenal permanence of a moving object behind an occluding surface (tunnel effect; Michotte 1950 Acta Psychologica 7 293-322) can produce position capture. Observers saw two objects (circles) moving vertically in opposite directions, one in each visual hemifield. Two horizontal bars were simultaneously flashed at horizontally collinear positions with the fixation point at various timings. When the movement of the object was fully visible, the flashed bar appeared shifted in the motion direction of the circle. But this position-capture effect occurred only when the bar was presented ahead of or on the moving circle. Even when the motion trajectory was covered by an opaque surface and the bar was flashed after complete occlusion of the circle, the position-capture effect was still observed, though the positional asymmetry was less clear. These results show that movements of both visible and 'hidden' objects can modulate the perception of positions of flashed stimuli and suggest that a high-level representation of 'objects in motion' plays an important role in the position-capture effect.

Dynamics and control of robot for capturing objects in space

NASA Astrophysics Data System (ADS)

Huang, Panfeng

Space robots are expected to perform intricate tasks in future space services, such as satellite maintenance, refueling, and replacing the orbital replacement unit (ORU). To realize these missions, the capturing operation may not be avoided. Such operations will encounter some challenges because space robots have some unique characteristics unfound on ground-based robots, such as, dynamic singularities, dynamic coupling between manipulator and space base, limited energy supply and working without a fixed base, and so on. In addition, since contacts and impacts may not be avoided during capturing operation. Therefore, dynamics and control problems of space robot for capturing objects are significant research topics if the robots are to be deployed for the space services. A typical servicing operation mainly includes three phases: capturing the object, berthing and docking the object, then repairing the target. Therefore, this thesis will focus on resolving some challenging problems during capturing the object, berthing and docking, and so on. In this thesis, I study and analyze the dynamics and control problems of space robot for capturing objects. This work has potential impact in space robotic applications. I first study the contact and impact dynamics of space robot and objects. I specifically focus on analyzing the impact dynamics and mapping the relationship of influence and speed. Then, I develop the fundamental theory for planning the minimum-collision based trajectory of space robot and designing the configuration of space robot at the moment of capture. To compensate for the attitude of the space base during the capturing approach operation, a new balance control concept which can effectively balance the attitude of the space base using the dynamic couplings is developed. The developed balance control concept helps to understand of the nature of space dynamic coupling, and can be readily applied to compensate or minimize the disturbance to the space base. After capturing the object, the space robot must complete the following two tasks: one is to berth the object, and the other is to re-orientate the attitude of the whole robot system for communication and power supply. Therefore, I propose a method to accomplish these two tasks simultaneously using manipulator motion only. The ultimate goal of space services is to realize the capture and manipulation autonomously. Therefore, I propose an affective approach based on learning human skill to track and capture the objects automatically in space. With human-teaching demonstration, the space robot is able to learn and abstract human tracking and capturing skill using an efficient neural-network learning architecture that combines flexible Cascade Neural Networks with Node Decoupled Extended Kalman Filtering (CNN-NDEKF). The simulation results attest that this approach is useful and feasible in tracking trajectory planning and capturing of space robot. Finally I propose a novel approach based on Genetic Algorithms (GAs) to optimize the approach trajectory of space robots in order to realize effective and stable operations. I complete the minimum-torque path planning in order to save the limited energy in space, and design the minimum jerk trajectory for the stabilization of the space manipulator and its space base. These optimal algorithms are very important and useful for the application of space robot.

Laser space debris removal: now, not later

NASA Astrophysics Data System (ADS)

Phipps, Claude R.

2015-02-01

Small (1-10cm) debris in low Earth orbit (LEO) are extremely dangerous, because they spread the breakup cascade depicted in the movie "Gravity." Laser-Debris-Removal (LDR) is the only solution that can address both large and small debris. In this paper, we briefly review ground-based LDR, and discuss how a polar location can dramatically increase its effectiveness for the important class of sun-synchronous orbit (SSO) objects. No other solutions address the whole problem of large ( 1000cm, 1 ton) as well as small debris. Physical removal of small debris (by nets, tethers and so on) is impractical because of the energy cost of matching orbits. We also discuss a new proposal which uses a space-based station in low Earth orbit (LEO), and rapid, head-on interaction in 10- 40s rather than 4 minutes, with high-power bursts of 100ps, 355nm pulses from a 1.5m diameter aperture. The orbiting station employs "heat-capacity" laser mode with low duty cycle to create an adaptable, robust, dualmode system which can lower or raise large derelict objects into less dangerous orbits, as well as clear out the small debris in a 400-km thick LEO band. Time-average laser optical power is less than 15kW. The combination of short pulses and UV wavelength gives lower required energy density (fluence) on target as well as higher momentum coupling coefficient. This combination leads to much smaller mirrors and lower average power than the ground-based systems we have considered previously. Our system also permits strong defense of specific assets. Analysis gives an estimated cost of about 1k each to re-enter most small debris in a few months, and about 280k each to raise or lower 1-ton objects by 40km. We believe it can do this for 2,000 such large objects in about four years. Laser ablation is one of the few interactions in nature that propel a distant object without any significant reaction on the source.

Industrial Wasteland as Faced with Contemporary Landscape Architects’ Challenges

NASA Astrophysics Data System (ADS)

Tubielewicz-Michalczuk, Malwina

2017-10-01

The following article describes the problem of regeneration of industrial wasteland. It is illustrated with examples selected form various design projects created by outstanding contemporary landscape architects. It also shows how a correctly planned and performed project concerning regeneration of derelict industrial sites serves multiple functions, i. e. it serves as recreational zone as well as activates people. Moreover, it significantly enhances environmental value of a given area as well as stimulates emergence of innovative landscape investments. The paper presents innovative compositional arrangements used in creating projects concerning brownfields; balanced proportions of spatial elements, the possibility of approaching the area from different levels and perspectives and, also, the possibility of engaging fully with nature by physical contact with it.

The Disposal of Spacecraft and Launch Vehicle Stages in Low Earth Orbit

NASA Technical Reports Server (NTRS)

Johnson, Nicholas L.

2007-01-01

Spacecraft and launch vehicle stages abandoned in Earth orbit have historically been a primary source of debris from accidental explosions. In the future, such satellites will become the principal cause of orbital debris via inadvertent collisions. To curtail both the near-term and far-term risks posed by derelict spacecraft and launch vehicle stages to operational space systems, numerous national and international orbital debris mitigation guidelines specifically recommend actions which could prevent or limit such future debris generation. Although considerable progress has been made in implementing these recommendations, some changes to existing vehicle designs can be difficult. Moreover, the nature of some missions also can present technological and budgetary challenges to be compliant with widely accepted orbital debris mitigation measures.

Robust object tracking techniques for vision-based 3D motion analysis applications

NASA Astrophysics Data System (ADS)

Knyaz, Vladimir A.; Zheltov, Sergey Y.; Vishnyakov, Boris V.

2016-04-01

Automated and accurate spatial motion capturing of an object is necessary for a wide variety of applications including industry and science, virtual reality and movie, medicine and sports. For the most part of applications a reliability and an accuracy of the data obtained as well as convenience for a user are the main characteristics defining the quality of the motion capture system. Among the existing systems for 3D data acquisition, based on different physical principles (accelerometry, magnetometry, time-of-flight, vision-based), optical motion capture systems have a set of advantages such as high speed of acquisition, potential for high accuracy and automation based on advanced image processing algorithms. For vision-based motion capture accurate and robust object features detecting and tracking through the video sequence are the key elements along with a level of automation of capturing process. So for providing high accuracy of obtained spatial data the developed vision-based motion capture system "Mosca" is based on photogrammetric principles of 3D measurements and supports high speed image acquisition in synchronized mode. It includes from 2 to 4 technical vision cameras for capturing video sequences of object motion. The original camera calibration and external orientation procedures provide the basis for high accuracy of 3D measurements. A set of algorithms as for detecting, identifying and tracking of similar targets, so for marker-less object motion capture is developed and tested. The results of algorithms' evaluation show high robustness and high reliability for various motion analysis tasks in technical and biomechanics applications.

Online phase measuring profilometry for rectilinear moving object by image correction

NASA Astrophysics Data System (ADS)

Yuan, Han; Cao, Yi-Ping; Chen, Chen; Wang, Ya-Pin

2015-11-01

In phase measuring profilometry (PMP), the object must be static for point-to-point reconstruction with the captured deformed patterns. While the object is rectilinearly moving online, the size and pixel position differences of the object in different captured deformed patterns do not meet the point-to-point requirement. We propose an online PMP based on image correction to measure the three-dimensional shape of the rectilinear moving object. In the proposed method, the deformed patterns captured by a charge-coupled diode camera are reprojected from the oblique view to an aerial view first and then translated based on the feature points of the object. This method makes the object appear stationary in the deformed patterns. Experimental results show the feasibility and efficiency of the proposed method.

Full-color digitized holography for large-scale holographic 3D imaging of physical and nonphysical objects.

PubMed

Matsushima, Kyoji; Sonobe, Noriaki

2018-01-01

Digitized holography techniques are used to reconstruct three-dimensional (3D) images of physical objects using large-scale computer-generated holograms (CGHs). The object field is captured at three wavelengths over a wide area at high densities. Synthetic aperture techniques using single sensors are used for image capture in phase-shifting digital holography. The captured object field is incorporated into a virtual 3D scene that includes nonphysical objects, e.g., polygon-meshed CG models. The synthetic object field is optically reconstructed as a large-scale full-color CGH using red-green-blue color filters. The CGH has a wide full-parallax viewing zone and reconstructs a deep 3D scene with natural motion parallax.

Timbre Brownfield Prioritization Tool to support effective brownfield regeneration.

PubMed

Pizzol, Lisa; Zabeo, Alex; Klusáček, Petr; Giubilato, Elisa; Critto, Andrea; Frantál, Bohumil; Martinát, Standa; Kunc, Josef; Osman, Robert; Bartke, Stephan

2016-01-15

In the last decade, the regeneration of derelict or underused sites, fully or partly located in urban areas (or so called "brownfields"), has become more common, since free developable land (or so called "greenfields") has more and more become a scare and, hence, more expensive resource, especially in densely populated areas. Although the regeneration of brownfield sites can offer development potentials, the complexity of these sites requires considerable efforts to successfully complete their revitalization projects and the proper selection of promising sites is a pre-requisite to efficiently allocate the limited financial resources. The identification and analysis of success factors for brownfield sites regeneration can support investors and decision makers in selecting those sites which are the most advantageous for successful regeneration. The objective of this paper is to present the Timbre Brownfield Prioritization Tool (TBPT), developed as a web-based solution to assist stakeholders responsible for wider territories or clusters of brownfield sites (portfolios) to identify which brownfield sites should be preferably considered for redevelopment or further investigation. The prioritization approach is based on a set of success factors properly identified through a systematic stakeholder engagement procedure. Within the TBPT these success factors are integrated by means of a Multi Criteria Decision Analysis (MCDA) methodology, which includes stakeholders' requalification objectives and perspectives related to the brownfield regeneration process and takes into account the three pillars of sustainability (economic, social and environmental dimensions). The tool has been applied to the South Moravia case study (Czech Republic), considering two different requalification objectives identified by local stakeholders, namely the selection of suitable locations for the development of a shopping centre and a solar power plant, respectively. The application of the TBPT to the case study showed that it is flexible and easy to adapt to different local contexts, allowing the assessors to introduce locally relevant parameters identified according to their expertise and considering the availability of local data. Copyright © 2015 Elsevier Ltd. All rights reserved.

Preliminary system design of a Three Arm Capture Mechanism (TACM) flight demonstration article

NASA Technical Reports Server (NTRS)

Schaefer, Otto; Stasi, Bill

1993-01-01

The overall objective of the Three Arm Capture Mechanism (TACM) is to serve as a demonstration of capability for capture of objects in space. These objects could be satellites, expended boosters, pieces of debris, etc.; anything of significant size. With this capability we can significantly diminish the danger of major collisions of debris with valuable space assets and with each other, which would otherwise produce many smaller, high velocity pieces of debris which also become concerns. The captured objects would be jettisoned into the atmosphere, relocated in 'parking' orbits, or recovered for disposition or refurbishment. The dollar value of satellites launched into space continues to grow along with the cost of insurance; having a capture capability takes a positive step towards diminishing this added cost. The effort covered is a planning step towards a flight demonstration of the satellite capture capability. Based on the requirement to capture a communication class satellite, its associated booster, or both, a preliminary system definition of a retrieval kit is defined. The objective of the flight demonstration is to demonstrate the techniques proposed to perform the mission and to obtain data on technical issues requiring an in situ space environment. The former especially includes issues such as automated image recognition techniques and control strategies that enable an unmanned vehicle to rendezvous and capture a satellite, contact dynamics between the two bodies, and the flight segment level of automation required to support the mission. A development plan for the operational retrieval capability includes analysis work, computer and ground test simulations, and finally a flight demonstration. A concept to perform a selected mission capturing a precessing communications satellite is described. Further development efforts using analytical tools and laboratory facilities are required prior to reaching the point at which a full commitment to the flight demonstration design can be made.

Systems and Methods for Imaging of Falling Objects

NASA Technical Reports Server (NTRS)

Fallgatter, Cale (Inventor); Garrett, Tim (Inventor)

2014-01-01

Imaging of falling objects is described. Multiple images of a falling object can be captured substantially simultaneously using multiple cameras located at multiple angles around the falling object. An epipolar geometry of the captured images can be determined. The images can be rectified to parallelize epipolar lines of the epipolar geometry. Correspondence points between the images can be identified. At least a portion of the falling object can be digitally reconstructed using the identified correspondence points to create a digital reconstruction.

Capture of visual direction in dynamic vergence is reduced with flashed monocular lines.

PubMed

Jaschinski, Wolfgang; Jainta, Stephanie; Schürer, Michael

2006-08-01

The visual direction of a continuously presented monocular object is captured by the visual direction of a closely adjacent binocular object, which questions the reliability of nonius lines for measuring vergence. This was shown by Erkelens, C. J., and van Ee, R. (1997a,b) [Capture of the visual direction: An unexpected phenomenon in binocular vision. Vision Research, 37, 1193-1196; Capture of the visual direction of monocular objects by adjacent binocular objects. Vision Research, 37, 1735-1745] stimulating dynamic vergence by a counter phase oscillation of two square random-dot patterns (one to each eye) that contained a smaller central dot-free gap (of variable width) with a vertical monocular line oscillating in phase with the random-dot pattern of the respective eye; subjects adjusted the motion-amplitude of the line until it was perceived as (nearly) stationary. With a continuously presented monocular line, we replicated capture of visual direction provided the dot-free gap was narrow: the adjusted motion-amplitude of the line was similar as the motion-amplitude of the random-dot pattern, although large vergence errors occurred. However, when we flashed the line for 67 ms at the moments of maximal and minimal disparity of the vergence stimulus, we found that the adjusted motion-amplitude of the line was smaller; thus, the capture effect appeared to be reduced with flashed nonius lines. Accordingly, we found that the objectively measured vergence gain was significantly correlated (r=0.8) with the motion-amplitude of the flashed monocular line when the separation between the line and the fusion contour was at least 32 min arc. In conclusion, if one wishes to estimate the dynamic vergence response with psychophysical methods, effects of capture of visual direction can be reduced by using flashed nonius lines.

Single and multiple object tracking using log-euclidean Riemannian subspace and block-division appearance model.

PubMed

Hu, Weiming; Li, Xi; Luo, Wenhan; Zhang, Xiaoqin; Maybank, Stephen; Zhang, Zhongfei

2012-12-01

Object appearance modeling is crucial for tracking objects, especially in videos captured by nonstationary cameras and for reasoning about occlusions between multiple moving objects. Based on the log-euclidean Riemannian metric on symmetric positive definite matrices, we propose an incremental log-euclidean Riemannian subspace learning algorithm in which covariance matrices of image features are mapped into a vector space with the log-euclidean Riemannian metric. Based on the subspace learning algorithm, we develop a log-euclidean block-division appearance model which captures both the global and local spatial layout information about object appearances. Single object tracking and multi-object tracking with occlusion reasoning are then achieved by particle filtering-based Bayesian state inference. During tracking, incremental updating of the log-euclidean block-division appearance model captures changes in object appearance. For multi-object tracking, the appearance models of the objects can be updated even in the presence of occlusions. Experimental results demonstrate that the proposed tracking algorithm obtains more accurate results than six state-of-the-art tracking algorithms.

A satellite-asteroid mystery and a possible early flux of scattered C-class asteroids

NASA Technical Reports Server (NTRS)

Hartmann, William K.

1987-01-01

The C spectral class implied by the neutral spectra and low albedo of probably capture-originated satellites orbiting Saturn, Jupiter, and Mars is noted to contradict evidence that class-C objects are native only to the outer half of the asteroid belt. It is presently suggested that Jupiter resonances may have scattered a high flux of C-type objects out of the belt as well as throughout the primordial solar system, at the close of planet accretion, when extended atmospheres could figure in their capture. The largest scattered object fluxes come from the resonance regions primarily populated by C-class objects, lending support to the Pollack et al. (1979) capture scenario invoking extended protoatmospheres.

Marine litter on the seafloor of the Faial-Pico Passage, Azores Archipelago.

PubMed

Rodríguez, Yasmina; Pham, Christopher K

2017-03-15

Plastic pollution in the marine environment attracts much attention from both researchers and the general public. Plastic items and other debris are commonly observed everywhere in the ocean, from the surface down to the deep ocean floor. In this study, we analysed 45.2km of video footage, collected during 56 transects surveying the seafloor of the Faial-Pico Passage in order to quantify the abundance of marine litter and its interactions with benthic fauna. The footage was collected by a Remotely Operated Vehicle (ROV) and a manned submersible at depths ranging between 40 and 525m. The mean litter density in the passage was 0.26±0.03 items·100m -1 (±SE) and was significantly higher between 151 and 250m compared to other depth strata. Overall, derelict fishing gear, mostly made of plastic, were the most common objects found on the seafloor, representing 64% of all items. Although we observed few evidence of direct deleterious effects by the litter, interactions with fauna were observed in more than half of the items. This study makes an important contribution in quantifying the abundance of marine litter on the seafloor of the Azores. The location of the Faial-Pico Passage, close to shore, makes it an appropriate site for long-term monitoring of litter on the seafloor and evaluate the efficiency of upcoming public policies aimed at reducing litter input into the oceans. Copyright © 2017 Elsevier Ltd. All rights reserved.

City Life: Rankings (Livability) versus Perceptions (Satisfaction)

ERIC Educational Resources Information Center

Okulicz-Kozaryn, Adam

2013-01-01

I investigate the relationship between the popular Mercer city ranking (livability) and survey data (satisfactions). Livability aims to capture "objective" quality of life such as infrastructure. Survey items capture "subjective" quality of life such as satisfaction with city. The relationship between objective measures of quality of life and…

Determining root correspondence between previously and newly detected objects

DOEpatents

Paglieroni, David W.; Beer, N Reginald

2014-06-17

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

Does apparent size capture attention in visual search? Evidence from the Muller-Lyer illusion.

PubMed

Proulx, Michael J; Green, Monique

2011-11-23

Is perceived size a crucial factor for the bottom-up guidance of attention? Here, a visual search experiment was used to examine whether an irrelevantly longer object can capture attention when participants were to detect a vertical target item. The longer object was created by an apparent size manipulation, the Müller-Lyer illusion; however, all objects contained the same number of pixels. The vertical target was detected more efficiently when it was also perceived as the longer item that was defined by apparent size. Further analysis revealed that the longer Müller-Lyer object received a greater degree of attentional priority than published results for other features such as retinal size, luminance contrast, and the abrupt onset of a new object. The present experiment has demonstrated for the first time that apparent size can capture attention and, thus, provide bottom-up guidance on the basis of perceived salience.

Dynamic interrogative data capture (DIDC) : concept of operations.

DOT National Transportation Integrated Search

2016-04-01

This Concept of Operations (ConOps) describes the characteristics of the Dynamic Interrogative Data Capture (DIDC) algorithms and associated software. The objective of the DIDC algorithms and software is to optimize the capture and transmission of ve...

Subliminally presented and stored objects capture spatial attention.

PubMed

Astle, Duncan E; Nobre, Anna C; Scerif, Gaia

2010-03-10

When objects disappear from view, we can still bring them to mind, at least for brief periods of time, because we can represent those objects in visual short-term memory (VSTM) (Sperling, 1960; Cowan, 2001). A defining characteristic of this representation is that it is topographic, that is, it preserves a spatial organization based on the original visual percept (Vogel and Machizawa, 2004; Astle et al., 2009; Kuo et al., 2009). Recent research has also shown that features or locations of visual items that match those being maintained in conscious VSTM automatically capture our attention (Awh and Jonides, 2001; Olivers et al., 2006; Soto et al., 2008). But do objects leave some trace that can guide spatial attention, even without participants intentionally remembering them? Furthermore, could subliminally presented objects leave a topographically arranged representation that can capture attention? We presented objects either supraliminally or subliminally and then 1 s later re-presented one of those objects in a new location, as a "probe" shape. As participants made an arbitrary perceptual judgment on the probe shape, their covert spatial attention was drawn to the original location of that shape, regardless of whether its initial presentation had been supraliminal or subliminal. We demonstrate this with neural and behavioral measures of memory-driven attentional capture. These findings reveal the existence of a topographically arranged store of "visual" objects, the content of which is beyond our explicit awareness but which nonetheless guides spatial attention.

Geological Sequestration Training and Research Program in Capture and Transport: Development of the Most Economical Separation Method for CO2 Capture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vahdat, Nader

2013-09-30

The project provided hands-on training and networking opportunities to undergraduate students in the area of carbon dioxide (CO2) capture and transport, through fundamental research study focused on advanced separation methods that can be applied to the capture of CO2 resulting from the combustion of fossil-fuels for power generation . The project team’s approach to achieve its objectives was to leverage existing Carbon Capture and Storage (CCS) course materials and teaching methods to create and implement an annual CCS short course for the Tuskegee University community; conduct a survey of CO2 separation and capture methods; utilize data to verify and developmore » computer models for CO2 capture and build CCS networks and hands-on training experiences. The objectives accomplished as a result of this project were: (1) A comprehensive survey of CO2 capture methods was conducted and mathematical models were developed to compare the potential economics of the different methods based on the total cost per year per unit of CO2 avoidance; and (2) Training was provided to introduce the latest CO2 capture technologies and deployment issues to the university community.« less

Attribute and topology based change detection in a constellation of previously detected objects

DOEpatents

Paglieroni, David W.; Beer, Reginald N.

2016-01-19

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

The impact of intonation and valence on objective and subjective attention capture by auditory alarms.

PubMed

Ljungberg, Jessica K; Parmentier, Fabrice

2012-10-01

The objective was to study the involuntary capture of attention by spoken words varying in intonation and valence. In studies of verbal alarms, the propensity of alarms to capture attention has been primarily assessed with the use of subjective ratings of their perceived urgency. Past studies suggest that such ratings vary with the alarms' spoken urgency and content. We measured attention capture by spoken words varying in valence (negative vs. neutral) and intonation (urgently vs. nonurgently spoken) through subjective ratings and behavioral measures. The key behavioral measure was the response latency to visual stimuli in the presence of spoken words breaking away from the periodical repetition of a tone. The results showed that all words captured attention relative to a baseline standard tone but that this effect was partly counteracted by a relative speeding of responses for urgently compared with nonurgently spoken words. Word valence did not affect behavioral performance. Rating data showed that both intonation and valence increased significantly perceived urgency and attention grabbing without any interaction. The data suggest a congruency between subjective ratings and behavioral performance with respect to spoken intonation but not valence. This study demonstrates the usefulness and feasibility of objective measures of attention capture to help design efficient alarm systems.

The population of natural Earth satellites

NASA Astrophysics Data System (ADS)

Granvik, Mikael; Vaubaillon, Jeremie; Jedicke, Robert

2012-03-01

We have for the first time calculated the population characteristics of the Earth’s irregular natural satellites (NESs) that are temporarily captured from the near-Earth-object (NEO) population. The steady-state NES size-frequency and residence-time distributions were determined under the dynamical influence of all the massive bodies in the Solar System (but mainly the Sun, Earth, and Moon) for NEOs of negligible mass. To this end, we compute the NES capture probability from the NEO population as a function of the latter’s heliocentric orbital elements and combine those results with the current best estimates for the NEO size-frequency and orbital distribution. At any given time there should be at least one NES of 1-m diameter orbiting the Earth. The average temporarily-captured orbiter (TCO; an object that makes at least one revolution around the Earth in a co-rotating coordinate system) completes (2.88 ± 0.82) rev around the Earth during a capture event that lasts (286 ± 18) d. We find a small preference for capture events starting in either January or July. Our results are consistent with the single known natural TCO, 2006 RH120, a few-meter diameter object that was captured for about a year starting in June 2006. We estimate that about 0.1% of all meteors impacting the Earth were TCOs.

Speckle-learning-based object recognition through scattering media.

PubMed

Ando, Takamasa; Horisaki, Ryoichi; Tanida, Jun

2015-12-28

We experimentally demonstrated object recognition through scattering media based on direct machine learning of a number of speckle intensity images. In the experiments, speckle intensity images of amplitude or phase objects on a spatial light modulator between scattering plates were captured by a camera. We used the support vector machine for binary classification of the captured speckle intensity images of face and non-face data. The experimental results showed that speckles are sufficient for machine learning.

Attention Capture by Faces

ERIC Educational Resources Information Center

Langton, Stephen R. H.; Law, Anna S.; Burton, A. Mike; Schweinberger, Stefan R.

2008-01-01

We report three experiments that investigate whether faces are capable of capturing attention when in competition with other non-face objects. In Experiment 1a participants took longer to decide that an array of objects contained a butterfly target when a face appeared as one of the distracting items than when the face did not appear in the array.…

The same-location cost is unrelated to attentional settings: an object-updating account.

PubMed

Carmel, Tomer; Lamy, Dominique

2014-08-01

What mechanisms allow us to ignore salient yet irrelevant visual information has been a matter of intense debate. According to the contingent-capture hypothesis, such information is filtered out, whereas according to the salience-based account, it captures attention automatically. Several recent studies have reported a same-location cost that appears to fit neither of these accounts. These showed that responses may actually be slower when the target appears at the location just occupied by an irrelevant singleton distractor. Here, we investigated the mechanisms underlying this same-location cost. Our findings show that the same-location cost is unrelated to automatic attentional capture or strategic setting of attentional priorities, and therefore invalidate the feature-based inhibition and fast attentional disengagement accounts of this effect. In addition, we show that the cost is wiped out when the cue and target are not perceived as parts of the same object. We interpret these findings as indicating that the same-location cost has been previously misinterpreted by both bottom-up and top-down theories of attentional capture. We propose that it is better understood as a consequence of object updating, namely, as the cost of updating the information stored about an object when this object changes across time.

Automatic guidance of attention during real-world visual search.

PubMed

Seidl-Rathkopf, Katharina N; Turk-Browne, Nicholas B; Kastner, Sabine

2015-08-01

Looking for objects in cluttered natural environments is a frequent task in everyday life. This process can be difficult, because the features, locations, and times of appearance of relevant objects often are not known in advance. Thus, a mechanism by which attention is automatically biased toward information that is potentially relevant may be helpful. We tested for such a mechanism across five experiments by engaging participants in real-world visual search and then assessing attentional capture for information that was related to the search set but was otherwise irrelevant. Isolated objects captured attention while preparing to search for objects from the same category embedded in a scene, as revealed by lower detection performance (Experiment 1A). This capture effect was driven by a central processing bottleneck rather than the withdrawal of spatial attention (Experiment 1B), occurred automatically even in a secondary task (Experiment 2A), and reflected enhancement of matching information rather than suppression of nonmatching information (Experiment 2B). Finally, attentional capture extended to objects that were semantically associated with the target category (Experiment 3). We conclude that attention is efficiently drawn towards a wide range of information that may be relevant for an upcoming real-world visual search. This mechanism may be adaptive, allowing us to find information useful for our behavioral goals in the face of uncertainty.

BSM (+BMM) Data Emulator Dynamic Interrogative Data Capture (DIDC) Assessment Report: Impacts of DIDC

DOT National Transportation Integrated Search

2016-04-01

The objective of the Dynamic Interrogative Data Capture (DIDC) algorithms and software is to optimize the capture and transmission of vehicle-based data under a range of dynamically configurable messaging strategies. The key hypothesis of DIDC is tha...

Oculomotor capture during real-world scene viewing depends on cognitive load.

PubMed

Matsukura, Michi; Brockmole, James R; Boot, Walter R; Henderson, John M

2011-03-25

It has been claimed that gaze control during scene viewing is largely governed by stimulus-driven, bottom-up selection mechanisms. Recent research, however, has strongly suggested that observers' top-down control plays a dominant role in attentional prioritization in scenes. A notable exception to this strong top-down control is oculomotor capture, where visual transients in a scene draw the eyes. One way to test whether oculomotor capture during scene viewing is independent of an observer's top-down goal setting is to reduce observers' cognitive resource availability. In the present study, we examined whether increasing observers' cognitive load influences the frequency and speed of oculomotor capture during scene viewing. In Experiment 1, we tested whether increasing observers' cognitive load modulates the degree of oculomotor capture by a new object suddenly appeared in a scene. Similarly, in Experiment 2, we tested whether increasing observers' cognitive load modulates the degree of oculomotor capture by an object's color change. In both experiments, the degree of oculomotor capture decreased as observers' cognitive resources were reduced. These results suggest that oculomotor capture during scene viewing is dependent on observers' top-down selection mechanisms. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Effect of a Potentially Low Solar Cycle #24 on Orbital Lifetimes of Fengyun 1-C Debris

NASA Technical Reports Server (NTRS)

Whitlock, David; Johnson, Nicholas; Matney, Mark; Krisko, Paula

2008-01-01

The magnitude of Solar Cycle #24 will have a non-trivial impact on the lifetimes of debris pieces that resulted from the intentional hypervelocity impact of the Fengyun 1-C satellite in January 2007. Recent solar flux measurements indicate Solar Cycle #24 has begun in the last few months, and will continue until approximately 2019. While there have been differing opinions on whether the intensity of this solar cycle will be higher or lower than usual, the Space Weather Prediction Center within the National Oceanic Atmospheric Administration (NOAA/SWPC) has recently forecast unusually low solar activity, which would result in longer orbital lifetimes. Using models for both the breakup of Fengyun 1-C and the propagation of the resultant debris cloud, the Orbital Debris Program Office at NASA Johnson Space Center conducted a study to better understand the impact of the solar cycle on lifetimes for pieces as small as 1 mm. Using a modified collision breakup model and PROP3D propagation software, the orbits of nearly 2 million objects 1 mm and larger were propagated for up to 200 years. By comparing a normal solar cycle with that of the NOAA/SWPC forecast low cycle, the effect of the solar flux on the lifetimes of the debris pieces is evaluated. The modeling of the low solar cycle shows an additional debris count of 12% for pieces larger than 10 cm by 2019 when compared to the resultant debris count using a normal cycle. The difference becomes more exaggerated (over 15%) for debris count in the smaller size regimes. However, in 50 years, the models predict the differences in debris count from differing models of Solar Cycle #24 to be less than 10% for all size regimes, with less variance in the smaller sizes. Understanding the longevity of the debris cloud will affect collision probabilities for both operational spacecraft and large derelict objects over the next century and beyond.

A Bayesian Model of the Memory Colour Effect.

PubMed

Witzel, Christoph; Olkkonen, Maria; Gegenfurtner, Karl R

2018-01-01

According to the memory colour effect, the colour of a colour-diagnostic object is not perceived independently of the object itself. Instead, it has been shown through an achromatic adjustment method that colour-diagnostic objects still appear slightly in their typical colour, even when they are colourimetrically grey. Bayesian models provide a promising approach to capture the effect of prior knowledge on colour perception and to link these effects to more general effects of cue integration. Here, we model memory colour effects using prior knowledge about typical colours as priors for the grey adjustments in a Bayesian model. This simple model does not involve any fitting of free parameters. The Bayesian model roughly captured the magnitude of the measured memory colour effect for photographs of objects. To some extent, the model predicted observed differences in memory colour effects across objects. The model could not account for the differences in memory colour effects across different levels of realism in the object images. The Bayesian model provides a particularly simple account of memory colour effects, capturing some of the multiple sources of variation of these effects.

A Bayesian Model of the Memory Colour Effect

PubMed Central

Olkkonen, Maria; Gegenfurtner, Karl R.

2018-01-01

According to the memory colour effect, the colour of a colour-diagnostic object is not perceived independently of the object itself. Instead, it has been shown through an achromatic adjustment method that colour-diagnostic objects still appear slightly in their typical colour, even when they are colourimetrically grey. Bayesian models provide a promising approach to capture the effect of prior knowledge on colour perception and to link these effects to more general effects of cue integration. Here, we model memory colour effects using prior knowledge about typical colours as priors for the grey adjustments in a Bayesian model. This simple model does not involve any fitting of free parameters. The Bayesian model roughly captured the magnitude of the measured memory colour effect for photographs of objects. To some extent, the model predicted observed differences in memory colour effects across objects. The model could not account for the differences in memory colour effects across different levels of realism in the object images. The Bayesian model provides a particularly simple account of memory colour effects, capturing some of the multiple sources of variation of these effects. PMID:29760874

Characterization of marine debris in North Carolina salt marshes.

PubMed

Viehman, Shay; Vander Pluym, Jenny L; Schellinger, Jennifer

2011-12-01

Marine debris composition, density, abundance, and accumulation were evaluated in salt marshes in Carteret County, North Carolina seasonally between 2007 and 2009. We assessed relationships between human use patterns and debris type. Wave effects on marine debris density were examined using a GIS-based forecasting tool. We assessed the influence of site wave exposure, period, and height on debris quantity. Presence and abundance of debris were related to wave exposure, vegetation type and proximity of the strata to human population and human use patterns. Plastic pieces accounted for the majority of all debris. Small debris (0-5 cm) was primarily composed of foam pieces and was frequently affiliated with natural wrack. Large debris (>100 cm) was encountered in all marsh habitat types surveyed and was primarily composed of anthropogenic wood and derelict fishing gear. Marsh cleanup efforts should be targeted to specific habitat types or debris types to minimize further damage to sensitive habitats. Published by Elsevier Ltd.

Marine debris from the Oregon Dungeness crab fishery recovered in the Northwestern Hawaiian Islands: identification and oceanic drift paths.

PubMed

Ebbesmeyer, Curtis C; Ingraham, W J; Jones, Jason A; Donohue, Mary J

2012-01-01

Two Dungeness crab trap tags and floats lost off the State of Oregon, USA during the 2006-2007 fishing season were recovered 4years later in the Northwestern Hawaiian Islands (NWHI): on Lisianski Island on July 15, 2010; and on Kure Atoll on December 10, 2010. This is the first documented recovery of marine debris from Oregon fisheries in the NWHI. We simulate the oceanic drift tracks of the derelict fishing gear with the Ocean Surface Current Simulator (OSCURS) model using estimated loss dates in Oregon based on interviews with the crab trap owners and known recovery sites and dates in the NWHI. These data confirm the US Pacific Northwest as a source of marine debris deposited in the NWHI and provide enhanced understanding of the oceanic drift pathways of marine debris in the North Pacific Ocean. Copyright © 2011 Elsevier Ltd. All rights reserved.

System, Apparatus, and Method for Active Debris Removal

NASA Technical Reports Server (NTRS)

Hickey, Christopher J. (Inventor); Spehar, Peter T. (Inventor); Griffith, Sr., Anthony D. (Inventor); Kohli, Rajiv (Inventor); Burns, Susan H. (Inventor); Gruber, David J. (Inventor); Lee, David E. (Inventor); Robinson, Travis M. (Inventor); Damico, Stephen J. (Inventor); Smith, Jason T. (Inventor)

2017-01-01

Systems, apparatuses, and methods for removal of orbital debris are provided. In one embodiment, an apparatus includes a spacecraft control unit configured to guide and navigate the apparatus to a target. The apparatus also includes a dynamic object characterization unit configured to characterize movement, and a capture feature, of the target. The apparatus further includes a capture and release unit configured to capture a target and deorbit or release the target. The collection of these apparatuses is then employed as multiple, independent and individually operated vehicles launched from a single launch vehicle for the purpose of disposing of multiple debris objects.

The role of unique color changes and singletons in attention capture.

PubMed

von Mühlenen, Adrian; Conci, Markus

2016-10-01

Previous studies have shown that a sudden color change is typically less salient in capturing attention than the onset of a new object. Von Mühlenen, Rempel, and Enns (Psychological Science 16: 979-986, 2005) showed that a color change can capture attention as effectively as the onset of a new object given that it occurs during a period of temporal calm, where no other display changes happen. The current study presents a series of experiments that further investigate the conditions under which a change in color captures attention, by disentangling the change signal from the onset of a singleton. The results show that the item changing color receives attentional priority irrespective of whether this change goes along with the appearance of a singleton or not.

40 CFR Appendix A to Subpart Kk of... - Data Quality Objective and Lower Confidence Limit Approaches for Alternative Capture Efficiency...

Code of Federal Regulations, 2013 CFR

2013-07-01

... approach follows: 4.3A source conducts an initial series of at least three runs. The owner or operator may... Confidence Limit Approaches for Alternative Capture Efficiency Protocols and Test Methods A Appendix A to... to Subpart KK of Part 63—Data Quality Objective and Lower Confidence Limit Approaches for Alternative...

40 CFR Appendix A to Subpart Kk of... - Data Quality Objective and Lower Confidence Limit Approaches for Alternative Capture Efficiency...

Code of Federal Regulations, 2010 CFR

2010-07-01

... approach follows: 4.3A source conducts an initial series of at least three runs. The owner or operator may... Confidence Limit Approaches for Alternative Capture Efficiency Protocols and Test Methods A Appendix A to... to Subpart KK of Part 63—Data Quality Objective and Lower Confidence Limit Approaches for Alternative...

40 CFR Appendix A to Subpart Kk of... - Data Quality Objective and Lower Confidence Limit Approaches for Alternative Capture Efficiency...

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the LCL approach follows: 4.3A source conducts an initial series of at least three runs. The owner... Confidence Limit Approaches for Alternative Capture Efficiency Protocols and Test Methods A Appendix A to... to Subpart KK of Part 63—Data Quality Objective and Lower Confidence Limit Approaches for Alternative...

40 CFR Appendix A to Subpart Kk of... - Data Quality Objective and Lower Confidence Limit Approaches for Alternative Capture Efficiency...

Code of Federal Regulations, 2012 CFR

2012-07-01

... approach follows: 4.3A source conducts an initial series of at least three runs. The owner or operator may... Confidence Limit Approaches for Alternative Capture Efficiency Protocols and Test Methods A Appendix A to... to Subpart KK of Part 63—Data Quality Objective and Lower Confidence Limit Approaches for Alternative...

Automatic guidance of attention during real-world visual search

PubMed Central

Seidl-Rathkopf, Katharina N.; Turk-Browne, Nicholas B.; Kastner, Sabine

2015-01-01

Looking for objects in cluttered natural environments is a frequent task in everyday life. This process can be difficult, as the features, locations, and times of appearance of relevant objects are often not known in advance. A mechanism by which attention is automatically biased toward information that is potentially relevant may thus be helpful. Here we tested for such a mechanism across five experiments by engaging participants in real-world visual search and then assessing attentional capture for information that was related to the search set but was otherwise irrelevant. Isolated objects captured attention while preparing to search for objects from the same category embedded in a scene, as revealed by lower detection performance (Experiment 1A). This capture effect was driven by a central processing bottleneck rather than the withdrawal of spatial attention (Experiment 1B), occurred automatically even in a secondary task (Experiment 2A), and reflected enhancement of matching information rather than suppression of non-matching information (Experiment 2B). Finally, attentional capture extended to objects that were semantically associated with the target category (Experiment 3). We conclude that attention is efficiently drawn towards a wide range of information that may be relevant for an upcoming real-world visual search. This mechanism may be adaptive, allowing us to find information useful for our behavioral goals in the face of uncertainty. PMID:25898897

Fixation not required: characterizing oculomotor attention capture for looming stimuli.

PubMed

Lewis, Joanna E; Neider, Mark B

2015-10-01

A stimulus moving toward us, such as a ball being thrown in our direction or a vehicle braking suddenly in front of ours, often represents a stimulus that requires a rapid response. Using a visual search task in which target and distractor items were systematically associated with a looming object, we explored whether this sort of looming motion captures attention, the nature of such capture using eye movement measures (overt/covert), and the extent to which such capture effects are more closely tied to motion onset or the motion itself. We replicated previous findings indicating that looming motion induces response time benefits and costs during visual search Lin, Franconeri, & Enns(Psychological Science 19(7): 686-693, 2008). These differences in response times were independent of fixation, indicating that these capture effects did not necessitate overt attentional shifts to a looming object for search benefits or costs to occur. Interestingly, we found no differences in capture benefits and costs associated with differences in looming motion type. Combined, our results suggest that capture effects associated with looming motion are more likely subserved by covert attentional mechanisms rather than overt mechanisms, and attention capture for looming motion is likely related to motion itself rather than the onset of motion.

Development of a new calibration procedure and its experimental validation applied to a human motion capture system.

PubMed

Royo Sánchez, Ana Cristina; Aguilar Martín, Juan José; Santolaria Mazo, Jorge

2014-12-01

Motion capture systems are often used for checking and analyzing human motion in biomechanical applications. It is important, in this context, that the systems provide the best possible accuracy. Among existing capture systems, optical systems are those with the highest accuracy. In this paper, the development of a new calibration procedure for optical human motion capture systems is presented. The performance and effectiveness of that new calibration procedure are also checked by experimental validation. The new calibration procedure consists of two stages. In the first stage, initial estimators of intrinsic and extrinsic parameters are sought. The camera calibration method used in this stage is the one proposed by Tsai. These parameters are determined from the camera characteristics, the spatial position of the camera, and the center of the capture volume. In the second stage, a simultaneous nonlinear optimization of all parameters is performed to identify the optimal values, which minimize the objective function. The objective function, in this case, minimizes two errors. The first error is the distance error between two markers placed in a wand. The second error is the error of position and orientation of the retroreflective markers of a static calibration object. The real co-ordinates of the two objects are calibrated in a co-ordinate measuring machine (CMM). The OrthoBio system is used to validate the new calibration procedure. Results are 90% lower than those from the previous calibration software and broadly comparable with results from a similarly configured Vicon system.

Radical “Visual Capture” Observed in a Patient with Severe Visual Agnosia

PubMed Central

Takaiwa, Akiko; Yoshimura, Hirokazu; Abe, Hirofumi; Terai, Satoshi

2003-01-01

We report the case of a 79-year-old female with visual agnosia due to brain infarction in the left posterior cerebral artery. She could recognize objects used in daily life rather well by touch (the number of objects correctly identified was 16 out of 20 presented objects), but she could not recognize them as well by vision (6 out of 20). In this case, it was expected that she would recognize them well when permitted to use touch and vision simultaneously. Our patient, however, performed poorly, producing 5 correct answers out of 20 in the Vision-and-Touch condition. It would be natural to think that visual capture functions when vision and touch provide contradictory information on concrete positions and shapes. However, in the present case, it functioned in spite of the visual deficit in recognizing objects. This should be called radical visual capture. By presenting detailed descriptions of her symptoms and neuropsychological and neuroradiological data, we clarify the characteristics of this type of capture. PMID:12719638

Introducing the depth transfer curve for 3D capture system characterization

NASA Astrophysics Data System (ADS)

Goma, Sergio R.; Atanassov, Kalin; Ramachandra, Vikas

2011-03-01

3D technology has recently made a transition from movie theaters to consumer electronic devices such as 3D cameras and camcorders. In addition to what 2D imaging conveys, 3D content also contains information regarding the scene depth. Scene depth is simulated through the strongest brain depth cue, namely retinal disparity. This can be achieved by capturing an image by horizontally separated cameras. Objects at different depths will be projected with different horizontal displacement on the left and right camera images. These images, when fed separately to either eye, leads to retinal disparity. Since the perception of depth is the single most important 3D imaging capability, an evaluation procedure is needed to quantify the depth capture characteristics. Evaluating depth capture characteristics subjectively is a very difficult task since the intended and/or unintended side effects from 3D image fusion (depth interpretation) by the brain are not immediately perceived by the observer, nor do such effects lend themselves easily to objective quantification. Objective evaluation of 3D camera depth characteristics is an important tool that can be used for "black box" characterization of 3D cameras. In this paper we propose a methodology to evaluate the 3D cameras' depth capture capabilities.

Facial Expression Influences Face Identity Recognition During the Attentional Blink

PubMed Central

2014-01-01

Emotional stimuli (e.g., negative facial expressions) enjoy prioritized memory access when task relevant, consistent with their ability to capture attention. Whether emotional expression also impacts on memory access when task-irrelevant is important for arbitrating between feature-based and object-based attentional capture. Here, the authors address this question in 3 experiments using an attentional blink task with face photographs as first and second target (T1, T2). They demonstrate reduced neutral T2 identity recognition after angry or happy T1 expression, compared to neutral T1, and this supports attentional capture by a task-irrelevant feature. Crucially, after neutral T1, T2 identity recognition was enhanced and not suppressed when T2 was angry—suggesting that attentional capture by this task-irrelevant feature may be object-based and not feature-based. As an unexpected finding, both angry and happy facial expressions suppress memory access for competing objects, but only angry facial expression enjoyed privileged memory access. This could imply that these 2 processes are relatively independent from one another. PMID:25286076

Facial expression influences face identity recognition during the attentional blink.

PubMed

Bach, Dominik R; Schmidt-Daffy, Martin; Dolan, Raymond J

2014-12-01

Emotional stimuli (e.g., negative facial expressions) enjoy prioritized memory access when task relevant, consistent with their ability to capture attention. Whether emotional expression also impacts on memory access when task-irrelevant is important for arbitrating between feature-based and object-based attentional capture. Here, the authors address this question in 3 experiments using an attentional blink task with face photographs as first and second target (T1, T2). They demonstrate reduced neutral T2 identity recognition after angry or happy T1 expression, compared to neutral T1, and this supports attentional capture by a task-irrelevant feature. Crucially, after neutral T1, T2 identity recognition was enhanced and not suppressed when T2 was angry-suggesting that attentional capture by this task-irrelevant feature may be object-based and not feature-based. As an unexpected finding, both angry and happy facial expressions suppress memory access for competing objects, but only angry facial expression enjoyed privileged memory access. This could imply that these 2 processes are relatively independent from one another.

A procedural, pragmatist account of ethical objectivity.

PubMed

Roth, Amanda

2013-06-01

This article offers a procedural, pragmatist account of objectivity in the domain of the good that is inspired by pragmatic and feminist critiques of objectivity in philosophy of science and epistemology. I begin by asking first what we want to capture--or ought to want to capture--with a notion of ethical objectivity and in answer to this question I identify four "points" to ethical objectivity: undergirding the possibility of mistakenness, making genuine disagreement possible, making sense of our appreciation of the ethical perspectives of others, and making possible a sense of ethical improvement or learning. I then lay out a process-based account of objectivity in ethics that makes good on the four points I have identified. Finally, I consider worries related to convergence, bias, and ontology and defend the procedural, pragmatist account in light of those potential objections.

Adaptive projection intensity adjustment for avoiding saturation in three-dimensional shape measurement

NASA Astrophysics Data System (ADS)

Chen, Chao; Gao, Nan; Wang, Xiangjun; Zhang, Zonghua

2018-03-01

Phase-based fringe projection methods have been commonly used for three-dimensional (3D) measurements. However, image saturation results in incorrect intensities in captured fringe pattern images, leading to phase and measurement errors. Existing solutions are complex. This paper proposes an adaptive projection intensity adjustment method to avoid image saturation and maintain good fringe modulation in measuring objects with a high range of surface reflectivities. The adapted fringe patterns are created using only one prior step of fringe-pattern projection and image capture. First, a set of phase-shifted fringe patterns with maximum projection intensity value of 255 and a uniform gray level pattern are projected onto the surface of an object. The patterns are reflected from and deformed by the object surface and captured by a digital camera. The best projection intensities corresponding to each saturated-pixel clusters are determined by fitting a polynomial function to transform captured intensities to projected intensities. Subsequently, the adapted fringe patterns are constructed using the best projection intensities at projector pixel coordinate. Finally, the adapted fringe patterns are projected for phase recovery and 3D shape calculation. The experimental results demonstrate that the proposed method achieves high measurement accuracy even for objects with a high range of surface reflectivities.

Acceleration of integral imaging based incoherent Fourier hologram capture using graphic processing unit.

PubMed

Jeong, Kyeong-Min; Kim, Hee-Seung; Hong, Sung-In; Lee, Sung-Keun; Jo, Na-Young; Kim, Yong-Soo; Lim, Hong-Gi; Park, Jae-Hyeung

2012-10-08

Speed enhancement of integral imaging based incoherent Fourier hologram capture using a graphic processing unit is reported. Integral imaging based method enables exact hologram capture of real-existing three-dimensional objects under regular incoherent illumination. In our implementation, we apply parallel computation scheme using the graphic processing unit, accelerating the processing speed. Using enhanced speed of hologram capture, we also implement a pseudo real-time hologram capture and optical reconstruction system. The overall operation speed is measured to be 1 frame per second.

Social comparison modulates reward-driven attentional capture.

PubMed

Jiao, Jun; Du, Feng; He, Xiaosong; Zhang, Kan

2015-10-01

It is well established that attention can be captured by task irrelevant and non-salient objects associated with value through reward learning. However, it is unknown whether social comparison influences reward-driven attentional capture. The present study created four social contexts to examine whether different social comparisons modulate the reward-driven capture of attention. The results showed that reward-driven attentional capture varied with different social comparison conditions. Most prominently, reward-driven attentional capture is dramatically reduced in the disadvantageous social comparison context, in which an individual is informed that the other participant is earning more monetary reward for performing the same task. These findings suggest that social comparison can affect the reward-driven capture of attention.

Orbit and size distributions for asteroids temporarily captured by the Earth-Moon system

NASA Astrophysics Data System (ADS)

Fedorets, Grigori; Granvik, Mikael; Jedicke, Robert

2017-03-01

As a continuation of the work by Granvik et al. (2012), we expand the statistical treatment of Earth's temporarily-captured natural satellites from temporarily-captured orbiters (TCOs, i.e., objects which make at least one orbit around the Earth) to the newly redefined subpopulation of temporarily-captured flybys (TCFs). TCFs are objects that while being gravitationally bound fail to make a complete orbit around the Earth while on a geocentric orbit, but nevertheless approach the Earth within its Hill radius. We follow the trajectories of massless test asteroids through the Earth-Moon system and record the orbital characteristics of those that are temporarily captured. We then carry out a steady-state analysis utilizing the novel NEO population model by Granvik et al. (2016). We also investigate how an quadratic distribution at very small values of e⊙ and i⊙ affects the predicted population statistics of Earth's temporarily-captured natural satellites. The steady-state population in both cases (constant and quadratic number distributions inside the e and i bins) is predicted to contain a slightly reduced number of meter-sized asteroids compared to the values of the previous paper. For the combined TCO/TCF population, we find the largest body constantly present on a geocentric orbit to be on the order of 80 cm in diameter. In the phase space, where the capture is possible, the capture efficiency of TCOs and TCFs is O(10-6 -10-4) . We also find that kilometer-scale asteroids are captured once every 10 Myr.

Subliminal spatial cues capture attention and strengthen between-object link.

PubMed

Chou, Wei-Lun; Yeh, Su-Ling

2011-12-01

According to the spreading hypothesis of object-based attention, a subliminal cue that can successfully capture attention to a location within an object should also cause attention to spread throughout the whole cued object and lead to the same-object advantage. Instead, we propose that a subliminal cue favors shifts of attention between objects and strengthens the between-object link, which is coded primarily within the dorsal pathway that governs the visual guidance of action. By adopting the two-rectangle method and using an effective subliminal cue to compare with the classic suprathreshold cue, we found a different result pattern with suprathreshold cues than with subliminal cues. The suprathreshold cue replicated the conventional location and object effects, whereas a subliminal cue led to a different-object advantage with a facilitatory location effect and a same-object advantage with an inhibitory location effect. These results support our consciousness-dependent shifting hypothesis but not the spreading hypothesis. Copyright © 2011 Elsevier Inc. All rights reserved.

Perceptual grouping allows for attention to cover noncontiguous locations and suppress capture from nearby locations.

PubMed

Kerzel, Dirk; Born, Sabine; Schönhammer, Josef

2012-12-01

A salient stimulus may interrupt visual search because of attentional capture. It has been shown that attentional capture occurs with a wide, but not with a small attentional window. We tested the hypothesis that capture depends more strongly on the shape of the attentional window than on its size. Search elements were arranged in two nested rings. The ring containing the search target remained fixed, while a salient color singleton occurred either in the same or in the other ring. We observed that color singletons only disrupted search when shown in the same ring as the search target. It is important to note that, when focusing on the outer array, which presumably required a larger attentional window, singletons on the inner array did not capture attention. In contrast to the original attentional window hypothesis, our results show that attentional capture does not always occur with a large attentional window. Rather, attention can be flexibly allocated to the set of relevant stimulus locations and attentional capture is confined to the attended locations. Further experiments showed that attention was allocated to search elements that were perceptually grouped into "whole" or "Gestalt"-like objects, which prevented attentional capture from nearby locations. However, when attention was allocated to noncontiguous locations that did not form a perceptual Gestalt, nearby locations elicited attentional capture. Perceptual grouping could be based on a combination of color and position, but not on color alone. Thus, the allocation of attention to Gestalt-like objects that were jointly defined by similarity and proximity prevented attentional capture from nearby locations.

Compositional mining of multiple object API protocols through state abstraction.

PubMed

Dai, Ziying; Mao, Xiaoguang; Lei, Yan; Qi, Yuhua; Wang, Rui; Gu, Bin

2013-01-01

API protocols specify correct sequences of method invocations. Despite their usefulness, API protocols are often unavailable in practice because writing them is cumbersome and error prone. Multiple object API protocols are more expressive than single object API protocols. However, the huge number of objects of typical object-oriented programs poses a major challenge to the automatic mining of multiple object API protocols: besides maintaining scalability, it is important to capture various object interactions. Current approaches utilize various heuristics to focus on small sets of methods. In this paper, we present a general, scalable, multiple object API protocols mining approach that can capture all object interactions. Our approach uses abstract field values to label object states during the mining process. We first mine single object typestates as finite state automata whose transitions are annotated with states of interacting objects before and after the execution of the corresponding method and then construct multiple object API protocols by composing these annotated single object typestates. We implement our approach for Java and evaluate it through a series of experiments.

Compositional Mining of Multiple Object API Protocols through State Abstraction

PubMed Central

Mao, Xiaoguang; Qi, Yuhua; Wang, Rui; Gu, Bin

2013-01-01

API protocols specify correct sequences of method invocations. Despite their usefulness, API protocols are often unavailable in practice because writing them is cumbersome and error prone. Multiple object API protocols are more expressive than single object API protocols. However, the huge number of objects of typical object-oriented programs poses a major challenge to the automatic mining of multiple object API protocols: besides maintaining scalability, it is important to capture various object interactions. Current approaches utilize various heuristics to focus on small sets of methods. In this paper, we present a general, scalable, multiple object API protocols mining approach that can capture all object interactions. Our approach uses abstract field values to label object states during the mining process. We first mine single object typestates as finite state automata whose transitions are annotated with states of interacting objects before and after the execution of the corresponding method and then construct multiple object API protocols by composing these annotated single object typestates. We implement our approach for Java and evaluate it through a series of experiments. PMID:23844378

Object onset and parvocellular guidance of attentional allocation.

PubMed

Cole, Geoff G; Kentridge, Robert W; Heywood, Charles A

2005-04-01

The parvocellular visual pathway in the primate brain is known to be involved with the processing of color. However, a subject of debate is whether an abrupt change in color, conveyed via this pathway, is capable of automatically attracting attention. It has been shown that the appearance of new objects defined solely by color is indeed capable of modulating attention. However, given evidence suggesting that the visual system is particularly sensitive to new onsets, it is unclear to what extent such results reflect effects of color change per se, rather than effects of object onset. We assessed attentional capture by color change that occurred as a result of either new objects appearing or already-present "old" objects changing color. Results showed that although new object onsets accrued attention, changing the color of old objects did not. We conclude that abrupt color change per se is not sufficient to capture attention.

Attentional capture by working memory contents.

PubMed

Pan, Yi

2010-06-01

There has been controversy on whether working memory (WM) contents automatically guide attention. The present study tried to replicate the effect of WM-based attentional capture using an adaption of Downing's (2000) paradigm, in which WM and attentional capture were combined. Subjects were presented with an attention display containing two objects, one of which could be precued by a matching item being held in WM. As measured by a probe discrimination task, the memory-matching object had a privileged status to capture attention regardless of the stimulus onset asynchronies between the memory cue and the attention display, even when there was absolutely no benefit for subjects to bias attention in favour of the memory match. These results suggest that WM contents guide attention in an involuntary manner. The implications of current findings for understanding of WM effects on visual selection are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

Properties of Earth's temporarily-captured flybys

NASA Astrophysics Data System (ADS)

Fedorets, Grigori; Granvik, Mikael

2014-11-01

In addition to the Moon, a population of small temporarily-captured NEOs is predicted to orbit the Earth. The definition of a natural Earth satellite is that it is on an elliptic geocentric orbit within 0.03 au from the Earth. The population is further divided into temporarily-captured orbiters (TCOs, or minimoons, making at least one full revolution around the Earth in a coordinate system co-rotating with the Sun) and temporarily-captured flybys (TCFs) which fail to make a full revolution, but are temporarily on an elliptic orbit around the Earth. Only one minimoon has been discovered to date, but it is expected that next generation surveys will be able to detect these objects regularly.Granvik et al. (2012) performed an extensive analysis of the behaviour of these temporarily-captured objects. One of the main results was that at any given moment there is at least one 1-meter-diameter minimoon in orbit around the Earth. However, the results of Granvik et al. (2012) raised questions considering the NES population such as the bimodality of the capture duration distribution and a distinctive lack of test particles within Earth's Hill sphere, which requires investigating the statistical properties also of the TCF population.In this work we confirm the population characteristics for minimoons described by Granvik et al. (2012), and extend the analysis to TCFs. For the calculations we use a Bulirsch-Stoer integrator implemented in the OpenOrb software package (Granvik et al. 2009). We study, e.g., the capture statistics, residence-time distributions, and steady-state properties of TCFs. Our preliminary results indicate that TCFs may be suitable targets for asteroid-redirect missions. More detailed knowledge of the TCF population will also improve our understanding of the link between temporarily-captured objects and NEOs in general.References: Granvik et al. (2009) MPS 44(12), 1853-1861; Granvik et al. (2012) Icarus 218, 262-277.

Cross-border cooperation potential in fostering redevelopment of degraded border areas - a case study approach.

NASA Astrophysics Data System (ADS)

Alexandre Castanho, Rui; Ramírez, Beatriz; Loures, Luis; Fernández-Pozo, Luis; Cabezas, José

2017-04-01

Border interactions have reached unprecedented levels in recent decades, not only due to their potential for territorial integration but also considering their role in supranational processes, such as landscape reclamation, infrastructure development and land use planning on European territory. In this scenario, successful examples related to the redevelopment of degraded areas have been showing positive impacts at several levels, such as the social, economic, environmental and aesthetic ones which have ultimately related this process, positively, to sustainability issues. However, concerning to border areas, and due to their inherent legislative and bureaucratic conflicts, the intervention in these areas is more complex. Still, and taking into account previously developed projects and strategies of cross-border cooperation (CBC) in European territory it is possible to identified that the definition of common master plans and common objectives are critical issues to achieve the desired territorial success. Additionally, recent studies have put forward some noteworthy ideas highlighting that it is possible to establish a positive correlation between CBC processes and an increasing redevelopment of degraded border areas, with special focus on the reclamation of derelict landscapes fostering soil reuse and redevelopment. The present research, throughout case study analysis at the Mediterranean level - considering case studies from Portugal, Spain, Monaco and Italy - which presents specific data on border landscape redevelopment, enables us to conclude that CBC processes have a positive influence on the potential redevelopment of degraded border areas, considering not only urban but also rural land. Furthermore, this paper presents data obtained through a public participation process which highlights that these areas present a greater potential for landscape reclamation, fostering resource sustainability and sustainable growth. Keywords: Spatial planning; Land degradation; Redevelopment; Cross-border cooperation (CBC); Land use.

Motion-Capture-Enabled Software for Gestural Control of 3D Models

NASA Technical Reports Server (NTRS)

Norris, Jeffrey S.; Luo, Victor; Crockett, Thomas M.; Shams, Khawaja S.; Powell, Mark W.; Valderrama, Anthony

2012-01-01

Current state-of-the-art systems use general-purpose input devices such as a keyboard, mouse, or joystick that map to tasks in unintuitive ways. This software enables a person to control intuitively the position, size, and orientation of synthetic objects in a 3D virtual environment. It makes possible the simultaneous control of the 3D position, scale, and orientation of 3D objects using natural gestures. Enabling the control of 3D objects using a commercial motion-capture system allows for natural mapping of the many degrees of freedom of the human body to the manipulation of the 3D objects. It reduces training time for this kind of task, and eliminates the need to create an expensive, special-purpose controller.

Capture of free-floating planets by planetary systems

NASA Astrophysics Data System (ADS)

Goulinski, Nadav; Ribak, Erez N.

2018-01-01

Evidence of exoplanets with orbits that are misaligned with the spin of the host star may suggest that not all bound planets were born in the protoplanetary disc of their current planetary system. Observations have shown that free-floating Jupiter-mass objects can exceed the number of stars in our Galaxy, implying that capture scenarios may not be so rare. To address this issue, we construct a three-dimensional simulation of a three-body scattering between a free-floating planet and a star accompanied by a Jupiter-mass bound planet. We distinguish between three different possible scattering outcomes, where the free-floating planet may get weakly captured after the brief interaction with the binary, remain unbound or 'kick out' the bound planet and replace it. The simulation was performed for different masses of the free-floating planets and stars, as well as different impact parameters, inclination angles and approach velocities. The outcome statistics are used to construct an analytical approximation of the cross-section for capturing a free-floating planet by fitting their dependence on the tested variables. The analytically approximated cross-section is used to predict the capture rate for these kinds of objects, and to estimate that about 1 per cent of all stars are expected to experience a temporary capture of a free-floating planet during their lifetime. Finally, we propose additional physical processes that may increase the capture statistics and whose contribution should be considered in future simulations in order to determine the fate of the temporarily captured planets.

Phytoremediative urban design: transforming a derelict and polluted harbour area into a green and productive neighbourhood.

PubMed

Wilschut, M; Theuws, P A W; Duchhart, I

2013-12-01

Many urban areas are polluted by industrial activities and waste disposal in landfills. Since conventional soil remediation techniques are costly and unsustainable, phytoremediation might offer an alternative. In this article, we explore how phytoremediation can be integrated into the transformation of urban post-industrial areas, while improving public space. Buiksloterham, a polluted and deprived industrial area in Amsterdam, serves as case study. Buiksloterham is polluted with heavy metals, with Zinc (Zn) concentrations being the highest. A regression-model for Alpine Pennycress (Thlaspi caerulescens) is used to estimate the time needed to remediate the site. This reveals a conflict in time between remediation and urban development. A research by design experiment shows how to overcome this conflict by dealing with polluted soil innovatively while emphasizing spatial and aesthetic qualities of the phytoremediation plant species. The resulting landscape framework integrates phytoremediation with biomass production and gives new ecological, economic and social value to Buiksloterham. Copyright © 2013 Elsevier Ltd. All rights reserved.

Marine debris accumulation in the Northwestern Hawaiian Islands: an examination of rates and processes.

PubMed

Dameron, Oliver J; Parke, Michael; Albins, Mark A; Brainard, Russell

2007-04-01

Large amounts of derelict fishing gear accumulate and cause damage to shallow coral reefs of the Northwestern Hawaiian Islands (NWHI). To facilitate maintenance of reefs cleaned during 1996-2005 removal efforts, we identify likely high-density debris areas by assessing reef characteristics (depth, benthic habitat type, and energy regime) that influence sub-regional debris accumulation. Previously cleaned backreef and lagoonal reefs at two NWHI locations were resurveyed for accumulated debris using two survey methods. Accumulated debris densities and weights were found to be greater in lagoonal reef areas. Sample weight-based debris densities are extrapolated to similar habitats throughout the NWHI using a spatial 'net habitat' dataset created by generalizing IKONOS satellite derivatives for depth and habitat classification. Prediction accuracy for this dataset is tested using historical debris point data. Annual NWHI debris accumulation is estimated to be 52.0 metric tonnes. For planning purposes, individual NWHI atolls/reefs are allotted a proportion of this total.

Stitching of near-nulled subaperture measurements

NASA Technical Reports Server (NTRS)

Devries, Gary (Inventor); Brophy, Christopher (Inventor); Forbes, Greg (Inventor); Murphy, Paul (Inventor)

2012-01-01

A metrology system for measuring aspheric test objects by subaperture stitching. A wavefront-measuring gauge having a limited capture range of wavefront shapes collects partially overlapping subaperture measurements over the test object. A variable optical aberrator reshapes the measurement wavefront with between a limited number of the measurements to maintain the measurement wavefront within the capture range of the wavefront-measuring gauge. Various error compensators are incorporated into a stitching operation to manage residual errors associated with the use of the variable optical aberrator.

Whatever you do, don't look at the...: Evaluating guidance by an exclusionary attentional template.

PubMed

Beck, Valerie M; Luck, Steven J; Hollingworth, Andrew

2018-04-01

People can use a target template consisting of one or more features to guide attention and gaze to matching objects in a search array. But can we also use feature information to guide attention away from known irrelevant items? Some studies found a benefit from foreknowledge of a distractor feature, whereas others found a cost. Importantly, previous work has largely relied on end-of-trial manual responses; it is unclear how feature-guided avoidance might unfold as candidate objects are inspected. In the current experiments, participants were cued with a distractor feature to avoid, then performed a visual search task while eye movements were recorded. Participants initially fixated a to-be-avoided object more frequently than predicted by chance, but they also demonstrated avoidance of cue-matching objects later in the trial. When provided more time between cue stimulus and search array, participants continued to be initially captured by a cued-color item. Furthermore, avoidance of cue-matching objects later in the trial was not contingent on initial capture by a cue-matching object. These results suggest that the conflicting findings in previous negative-cue experiments may be explained by a mixture of two independent processes: initial attentional capture by memory-matching items and later avoidance of known irrelevant items. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doug Cathro

The Lake Charles CCS Project is a large-scale industrial carbon capture and sequestration (CCS) project which will demonstrate advanced technologies that capture and sequester carbon dioxide (CO{sub 2}) emissions from industrial sources into underground formations. Specifically the Lake Charles CCS Project will accelerate commercialization of large-scale CO{sub 2} storage from industrial sources by leveraging synergy between a proposed petroleum coke to chemicals plant (the LCC Gasification Project) and the largest integrated anthropogenic CO{sub 2} capture, transport, and monitored sequestration program in the U.S. Gulf Coast Region. The Lake Charles CCS Project will promote the expansion of EOR in Texas andmore » Louisiana and supply greater energy security by expanding domestic energy supplies. The capture, compression, pipeline, injection, and monitoring infrastructure will continue to sequester CO{sub 2} for many years after the completion of the term of the DOE agreement. The objectives of this project are expected to be fulfilled by working through two distinct phases. The overall objective of Phase 1 was to develop a fully definitive project basis for a competitive Renewal Application process to proceed into Phase 2 - Design, Construction and Operations. Phase 1 includes the studies attached hereto that will establish: the engineering design basis for the capture, compression and transportation of CO{sub 2} from the LCC Gasification Project, and the criteria and specifications for a monitoring, verification and accounting (MVA) plan at the Hastings oil field in Texas. The overall objective of Phase 2, provided a successful competitive down-selection, is to execute design, construction and operations of three capital projects: (1) the CO{sub 2} capture and compression equipment, (2) a Connector Pipeline from the LLC Gasification Project to the Green Pipeline owned by Denbury and an affiliate of Denbury, and (3) a comprehensive MVA system at the Hastings oil field.« less

The fraction of total hand surface area involved in young children's outdoor hand-to-object contacts.

PubMed

AuYeung, Willa; Canales, Robert A; Leckie, James O

2008-11-01

Information on the fraction of total hand surface area touching a contaminated object is necessary in accurately estimating contaminant (e.g., pesticides, pathogens) loadings onto the hands during hand-to-object contacts. While several existing physical-stochastic human exposure models require such surface area data to estimate dermal and non-dietary ingestion exposure, there are very limited data sets. This paper provides statistical distributions of fractional surface areas (FSAs) for children's outdoor hand contacts. These distributions were constructed by combining information collected from two distinct studies exploring children's activity patterns and quantifying hand contact surface area. Results show that for outdoor contacts with "All Objects", a range of 0.13-0.27 captured median FSAs, while a range of 0.12-0.24 captured time-weighted FSAs. Overall, an FSA of 0.31 captured 80-100% of FSAs involved in each child's outdoor hand contacts, depending upon the object of interest. These values are much lower than the often conservative assumptions of up to 1 (i.e., the entire hand) that researchers currently make regarding FSAs involved in indoor and outdoor contacts [USEPA, 1997. Standard operating procedures (SOPs) for residential exposure assessments. Contract no. 68-W6-0030. http://www.epa.gov/pesticides/trac/science/trac6a05.pdf].

Low-cost structured-light based 3D capture system design

NASA Astrophysics Data System (ADS)

Dong, Jing; Bengtson, Kurt R.; Robinson, Barrett F.; Allebach, Jan P.

2014-03-01

Most of the 3D capture products currently in the market are high-end and pricey. They are not targeted for consumers, but rather for research, medical, or industrial usage. Very few aim to provide a solution for home and small business applications. Our goal is to fill in this gap by only using low-cost components to build a 3D capture system that can satisfy the needs of this market segment. In this paper, we present a low-cost 3D capture system based on the structured-light method. The system is built around the HP TopShot LaserJet Pro M275. For our capture device, we use the 8.0 Mpixel camera that is part of the M275. We augment this hardware with two 3M MPro 150 VGA (640 × 480) pocket projectors. We also describe an analytical approach to predicting the achievable resolution of the reconstructed 3D object based on differentials and small signal theory, and an experimental procedure for validating that the system under test meets the specifications for reconstructed object resolution that are predicted by our analytical model. By comparing our experimental measurements from the camera-projector system with the simulation results based on the model for this system, we conclude that our prototype system has been correctly configured and calibrated. We also conclude that with the analytical models, we have an effective means for specifying system parameters to achieve a given target resolution for the reconstructed object.

Synergistic approach of asteroid exploitation and planetary protection

NASA Astrophysics Data System (ADS)

Sanchez, J. P.; McInnes, C. R.

2012-02-01

The asteroid and cometary impact hazard has long been recognised as an important issue requiring risk assessment and contingency planning. At the same time asteroids have also been acknowledged as possible sources of raw materials for future large-scale space engineering ventures. This paper explores possible synergies between these two apparently opposed views; planetary protection and space resource exploitation. In particular, the paper assumes a 5 tonne low-thrust spacecraft as a baseline for asteroid deflection and capture (or resource transport) missions. The system is assumed to land on the asteroid and provide a continuous thrust able to modify the orbit of the asteroid according to the mission objective. The paper analyses the capability of such a near-term system to provide both planetary protection and asteroid resources to Earth. Results show that a 5 tonne spacecraft could provide a high level of protection for modest impact hazards: airburst and local damage events (caused by 15-170 m diameter objects). At the same time, the same spacecraft could also be used to transport to bound Earth orbits significant quantities of material through judicious use of orbital dynamics and passively safe aero-capture manoeuvres or low energy ballistic capture. As will be shown, a 5 tonne low-thrust spacecraft could potentially transport between 12 and 350 times its own mass of asteroid resources by means of ballistic capture or aero-capture trajectories that pose very low dynamical pressures on the object.

Deep Impact Autonomous Navigation : the trials of targeting the unknown

NASA Technical Reports Server (NTRS)

Kubitschek, Daniel G.; Mastrodemos, Nickolaos; Werner, Robert A.; Kennedy, Brian M.; Synnott, Stephen P.; Null, George W.; Bhaskaran, Shyam; Riedel, Joseph E.; Vaughan, Andrew T.

2006-01-01

On July 4, 2005 at 05:44:34.2 UTC the Impactor Spacecraft (s/c) impacted comet Tempel 1 with a relative speed of 10.3 km/s capturing high-resolution images of the surface of a cometary nucleus just seconds before impact. Meanwhile, the Flyby s/c captured the impact event using both the Medium Resolution Imager (MRI) and the High Resolution Imager (HRI) and tracked the nucleus for the entire 800 sec period between impact and shield attitude transition. The objective of the Impactor s/c was to impact in an illuminated area viewable from the Flyby s/c and capture high-resolution context images of the impact site. This was accomplished by using autonomous navigation (AutoNav) algorithms and precise attitude information from the attitude determination and control subsystem (ADCS). The Flyby s/c had two primary objectives: 1) capture the impact event with the highest temporal resolution possible in order to observe the ejecta plume expansion dynamics; and 2) track the impact site for at least 800 sec to observe the crater formation and capture the highest resolution images possible of the fully developed crater. These two objectives were met by estimating the Flyby s/c trajectory relative to Tempel 1 using the same AutoNav algorithms along with precise attitude information from ADCS and independently selecting the best impact site. This paper describes the AutoNav system, what happened during the encounter with Tempel 1 and what could have happened.

A real-time 3D end-to-end augmented reality system (and its representation transformations)

NASA Astrophysics Data System (ADS)

Tytgat, Donny; Aerts, Maarten; De Busser, Jeroen; Lievens, Sammy; Rondao Alface, Patrice; Macq, Jean-Francois

2016-09-01

The new generation of HMDs coming to the market is expected to enable many new applications that allow free viewpoint experiences with captured video objects. Current applications usually rely on 3D content that is manually created or captured in an offline manner. In contrast, this paper focuses on augmented reality applications that use live captured 3D objects while maintaining free viewpoint interaction. We present a system that allows live dynamic 3D objects (e.g. a person who is talking) to be captured in real-time. Real-time performance is achieved by traversing a number of representation formats and exploiting their specific benefits. For instance, depth images are maintained for fast neighborhood retrieval and occlusion determination, while implicit surfaces are used to facilitate multi-source aggregation for both geometry and texture. The result is a 3D reconstruction system that outputs multi-textured triangle meshes at real-time rates. An end-to-end system is presented that captures and reconstructs live 3D data and allows for this data to be used on a networked (AR) device. For allocating the different functional blocks onto the available physical devices, a number of alternatives are proposed considering the available computational power and bandwidth for each of the components. As we will show, the representation format can play an important role in this functional allocation and allows for a flexible system that can support a highly heterogeneous infrastructure.

Efficient view based 3-D object retrieval using Hidden Markov Model

NASA Astrophysics Data System (ADS)

Jain, Yogendra Kumar; Singh, Roshan Kumar

2013-12-01

Recent research effort has been dedicated to view based 3-D object retrieval, because of highly discriminative property of 3-D object and has multi view representation. The state-of-art method is highly depending on their own camera array setting for capturing views of 3-D object and use complex Zernike descriptor, HAC for representative view selection which limit their practical application and make it inefficient for retrieval. Therefore, an efficient and effective algorithm is required for 3-D Object Retrieval. In order to move toward a general framework for efficient 3-D object retrieval which is independent of camera array setting and avoidance of representative view selection, we propose an Efficient View Based 3-D Object Retrieval (EVBOR) method using Hidden Markov Model (HMM). In this framework, each object is represented by independent set of view, which means views are captured from any direction without any camera array restriction. In this, views are clustered (including query view) to generate the view cluster, which is then used to build the query model with HMM. In our proposed method, HMM is used in twofold: in the training (i.e. HMM estimate) and in the retrieval (i.e. HMM decode). The query model is trained by using these view clusters. The EVBOR query model is worked on the basis of query model combining with HMM. The proposed approach remove statically camera array setting for view capturing and can be apply for any 3-D object database to retrieve 3-D object efficiently and effectively. Experimental results demonstrate that the proposed scheme has shown better performance than existing methods. [Figure not available: see fulltext.

Content-based intermedia synchronization

NASA Astrophysics Data System (ADS)

Oh, Dong-Young; Sampath-Kumar, Srihari; Rangan, P. Venkat

1995-03-01

Inter-media synchronization methods developed until now have been based on syntactic timestamping of video frames and audio samples. These methods are not fully appropriate for the synchronization of multimedia objects which may have to be accessed individually by their contents, e.g. content-base data retrieval. We propose a content-based multimedia synchronization scheme in which a media stream is viewed as hierarchial composition of smaller objects which are logically structured based on the contents, and the synchronization is achieved by deriving temporal relations among logical units of media object. content-based synchronization offers several advantages such as, elimination of the need for time stamping, freedom from limitations of jitter, synchronization of independently captured media objects in video editing, and compensation for inherent asynchronies in capture times of video and audio.

Motion visualization and estimation for flapping wing systems

NASA Astrophysics Data System (ADS)

Hsu, Tzu-Sheng Shane; Fitzgerald, Timothy; Nguyen, Vincent Phuc; Patel, Trisha; Balachandran, Balakumar

2017-04-01

Studies of fluid-structure interactions associated with flexible structures such as flapping wings require the capture and quantification of large motions of bodies that may be opaque. As a case study, motion capture of a free flying Manduca sexta, also known as hawkmoth, is considered by using three synchronized high-speed cameras. A solid finite element (FE) representation is used as a reference body and successive snapshots in time of the displacement fields are reconstructed via an optimization procedure. One of the original aspects of this work is the formulation of an objective function and the use of shadow matching and strain-energy regularization. With this objective function, the authors penalize the projection differences between silhouettes of the captured images and the FE representation of the deformed body. The process and procedures undertaken to go from high-speed videography to motion estimation are discussed, and snapshots of representative results are presented. Finally, the captured free-flight motion is also characterized and quantified.

Example-based human motion denoising.

PubMed

Lou, Hui; Chai, Jinxiang

2010-01-01

With the proliferation of motion capture data, interest in removing noise and outliers from motion capture data has increased. In this paper, we introduce an efficient human motion denoising technique for the simultaneous removal of noise and outliers from input human motion data. The key idea of our approach is to learn a series of filter bases from precaptured motion data and use them along with robust statistics techniques to filter noisy motion data. Mathematically, we formulate the motion denoising process in a nonlinear optimization framework. The objective function measures the distance between the noisy input and the filtered motion in addition to how well the filtered motion preserves spatial-temporal patterns embedded in captured human motion data. Optimizing the objective function produces an optimal filtered motion that keeps spatial-temporal patterns in captured motion data. We also extend the algorithm to fill in the missing values in input motion data. We demonstrate the effectiveness of our system by experimenting with both real and simulated motion data. We also show the superior performance of our algorithm by comparing it with three baseline algorithms and to those in state-of-art motion capture data processing software such as Vicon Blade.

Rapid top-down control over template-guided attention shifts to multiple objects.

PubMed

Grubert, Anna; Fahrenfort, Johannes; Olivers, Christian N L; Eimer, Martin

2017-02-01

Previous research has shown that when observers search for targets defined by a particular colour, attention can be directed rapidly and independently to two target objects that appear in close temporal proximity. We investigated how such rapid attention shifts are modulated by task instructions to selectively attend versus ignore one of these objects. Two search displays that both contained a colour-defined target and a distractor in a different colour were presented in rapid succession, with a stimulus onset asynchrony (SOA) of 100ms. In different blocks, participants were instructed to attend and respond to target-colour objects in the first display and to ignore these objects in the second display, or vice versa. N2pc components were measured to track the allocation of spatial attention to target-colour objects in these two displays. When participants responded to the second display, irrelevant target-colour objects in the first display still triggered N2pc components, demonstrating task-set contingent attentional capture while a feature-specific target template is active. Critically, when participants responded to the first display instead, no N2pc was elicited by target-colour items in the second display, indicating that they no longer rapidly captured attention. However, these items still elicited a longer-latency contralateral negativity (SPCN component), suggesting that attention was oriented towards template-matching objects in working memory. This dissociation between N2pc and SPCN components shows that rapid attentional capture and subsequent attentional selection processes within working memory can be independent. We suggest that early attentional orienting mechanisms can be inhibited when task-set matching objects are no longer task-relevant, and that this type of inhibitory control is a rapid but transient process. Copyright © 2016 Elsevier Inc. All rights reserved.

Refocusing-range and image-quality enhanced optical reconstruction of 3-D objects from integral images using a principal periodic δ-function array

NASA Astrophysics Data System (ADS)

Ai, Lingyu; Kim, Eun-Soo

2018-03-01

We propose a method for refocusing-range and image-quality enhanced optical reconstruction of three-dimensional (3-D) objects from integral images only by using a 3 × 3 periodic δ-function array (PDFA), which is called a principal PDFA (P-PDFA). By directly convolving the elemental image array (EIA) captured from 3-D objects with the P-PDFAs whose spatial periods correspond to each object's depth, a set of spatially-filtered EIAs (SF-EIAs) are extracted, and from which 3-D objects can be reconstructed to be refocused on their real depth. convolutional operations are performed directly on each of the minimum 3 × 3 EIs of the picked-up EIA, the capturing and refocused-depth ranges of 3-D objects can be greatly enhanced, as well as 3-D objects much improved in image quality can be reconstructed without any preprocessing operations. Through ray-optical analysis and optical experiments with actual 3-D objects, the feasibility of the proposed method has been confirmed.

Flexible Electrostatic Technology for Capture and Handling Project

NASA Technical Reports Server (NTRS)

Keys, Andrew; Bryan, Tom; Horwitz, Chris; Rakoczy, John; Waggoner, Jason

2015-01-01

To NASA unfunded & planned missions: This new capability to sense proximity, flexibly align to, and attractively grip and capture practically any object in space without any pre-designed physical features or added sensors or actuators will enable or enhance many of MSFC's strategic emphasis areas in space transportation, and space systems such as: 1. A Flexible Electrostatic gripper can enable the capture, gripping and releasing of an extraterrestrial sample of different minerals or a sample canister (metallic or composite) without requiring a handle or grapple fixture.(B) 2. Flexible self-aligning in-space capture/soft docking or berthing of ISS resupply vehicles, pressurized modules, or nodes for in-space assembly and shielding, radiator, and solar Array deployment for space habitats (C) 3. The flexible electrostatic gripper when combined with a simple steerable extendible boom can grip, position, and release objects of various shapes and materials with low mass and power without any prior handles or physical accommodations or surface contamination for ISS experiment experiments and in-situ repair.(F)(G) 4. The Dexterous Docking concept previously proposed to allow simple commercial resupply ships to station-keep and capture either ISS or an Exploration vehicle for supply or fluid transfer lacked a self-sensing, compliant, soft capture gripper like FETCH that could retract and attach to a CBM. (I) 5. To enable a soft capture and de-orbit of a piece of orbital debris will require self-aligning gripping and holding an object wherever possible (thermal coverings or shields of various materials, radiators, solar arrays, antenna dishes) with little or no residual power while adding either drag or active low level thrust.(K) 6. With the scalability of the FETCH technology, small satellites can be captured and handled or can incorporate FETCH gripper to dock to and handle other small vehicles and larger objects for de-orbiting or mitigating Orbital debris (L) 7. Many of previous MSFC and NASA proposals or concepts can now be realized or simplified by the development of the this initial and future FETCH grippers including commercial resupply, Exploration vehicle assembly, Satellite servicing, and orbital debris removal since a major part of these missions is to align to and capture some handle. Completed Project (2013 - 2014) Flexible Electrostatic Technology for Capture & Handling Project Center Innovation Fund: MSFC CIF Program | Space Technology Mission Directorate (STMD) For more information visit techport.nasa.gov Some NASA technology projects are smaller (for example SBIR/STTR, NIAC and Center Innovation Fund), and will have less content than other, larger projects. Newly created projects may not sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 pounds per square inch or 70-300 lb./sq. ft. of surface contact, the FETCH can turn-on and turn-off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, and precision relocation for accurate anchor adhesion.

Attention capture by contour onsets and offsets: no special role for onsets.

PubMed

Watson, D G; Humphreys, G W

1995-07-01

In five experiments, we investigated the power of targets defined by the onset or offset of one of an object's parts (contour onsets and offsets) either to guide or to capture visual attention. In Experiment 1, search for a single contour onset target was compared with search for a single contour offset target against a static background of distractors; no difference was found between the efficiency with which each could be detected. In Experiment 2, onsets and offsets were compared for automatic attention capture, when both occurred simultaneously. Unlike in previous studies, the effects of overall luminance change, new-object creation, and number of onset and offset items were controlled. It was found that contour onset and offset items captured attention equally well. However, display size effects on both target types were also apparent. Such effects may have been due to competition for selection between multiple onset and offset stimuli. In Experiments 3 and 4, single onset and offset stimuli were presented simultaneously and pitted directly against one another among a background of static distractors. In Experiment 3, we examined "guided search," for a target that was formed either from an onset or from an offset among static items. In Experiment 4, the onsets and offsets were uncorrelated with the target location. Similar results occurred in both experiments: target onsets and offsets were detected more efficiently than static stimuli which needed serial search; there remained effects of display size on performance; but there was still no advantage for onsets. In Experiment 5, we examined automatic attention capture by single onset and offset stimuli presented individually among static distractors. Again, there was no advantage for onset over offset targets and a display size effect was also present. These results suggest that, both in isolation and in competition, onsets that do not form new objects neither guide nor gain automatic attention more efficiently than offsets. In addition, in contrast to previous studies in which onsets formed new objects, contour onsets and offsets did not reliably capture attention automatically.

Assessment of Dry Wells for Stormwater Capture and Aquifer Recharge in the Arid and Semi-Arid Southwest

EPA Science Inventory

GOAL: to evaluate the utility of innovative, distributed, low impact development (LID) infrastructure and best management practices (BMPs) for wet weather capture and drinking water aquifer recharge in the arid and semi-arid southwestern USA OBJECTIVES: Design, build, monitor t...

More than Meets the Eye: Age Differences in the Capture and Suppression of Oculomotor Action

PubMed Central

Ridderinkhof, K. Richard; Wijnen, Jasper G.

2011-01-01

Salient visual stimuli capture attention and trigger an eye-movement toward its location reflexively, regardless of an observer’s intentions. Here we aim to investigate the effect of aging (1) on the extent to which salient yet task-irrelevant stimuli capture saccades, and (2) on the ability to selectively suppress such oculomotor responses. Young and older adults were asked to direct their eyes to a target appearing in a stimulus array. Analysis of overall performance shows that saccades to the target object were disrupted by the appearance of a task-irrelevant abrupt-onset distractor when the location of this distractor did not coincide with that of the target object. Conditional capture function analyses revealed that, compared to young adults, older adults were more susceptible to oculomotor capture, and exhibited deficient selective suppression of the responses captured by task-irrelevant distractors. These effects were uncorrelated, suggesting two independent sources off age-related decline. Thus, with advancing age, salient visual distractors become more distracting; in part because they trigger reflexive eye-movements more potently; in part because of failing top-down control over such reflexes. The fact that these process-specific age effects remained concealed in overall oculomotor performance analyses emphasizes the utility of looking beyond the surface; indeed, there may be more than meets the eye. PMID:22046165

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

Optimization of forest wildlife objectives

Treesearch

John Hof; Robert Haight

2007-01-01

This chapter presents an overview of methods for optimizing wildlife-related objectives. These objectives hinge on landscape pattern, so we refer to these methods as "spatial optimization." It is currently possible to directly capture deterministic characterizations of the most basic spatial relationships: proximity relationships (including those that lead to...

The fraction of total hand surface area involved in young children's outdoor hand-to-object contacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

AuYeung, Willa; Canales, Robert A.; Leckie, James O.

2008-11-15

Information on the fraction of total hand surface area touching a contaminated object is necessary in accurately estimating contaminant (e.g., pesticides, pathogens) loadings onto the hands during hand-to-object contacts. While several existing physical-stochastic human exposure models require such surface area data to estimate dermal and non-dietary ingestion exposure, there are very limited data sets. This paper provides statistical distributions of fractional surface areas (FSAs) for children's outdoor hand contacts. These distributions were constructed by combining information collected from two distinct studies exploring children's activity patterns and quantifying hand contact surface area. Results show that for outdoor contacts with 'All Objects',more » a range of 0.13-0.27 captured median FSAs, while a range of 0.12-0.24 captured time-weighted FSAs. Overall, an FSA of 0.31 captured 80-100% of FSAs involved in each child's outdoor hand contacts, depending upon the object of interest. These values are much lower than the often conservative assumptions of up to 1 (i.e., the entire hand) that researchers currently make regarding FSAs involved in indoor and outdoor contacts [USEPA, 1997. Standard operating procedures (SOPs) for residential exposure assessments. Contract no. 68-W6-0030. < (http://www.epa.gov/pesticides/trac/science/trac6a05.pdf)>].« less

Capturing asteroids into bound orbits around the earth: Massive early return on an asteroid terminal defense system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hills, J.G.

1992-02-06

Nuclear explosives may be used to capture small asteroids (e.g., 20--50 meters in diameter) into bound orbits around the earth. The captured objects could be used for construction material for manned and unmanned activity in Earth orbit. Asteroids with small approach velocities, which are the ones most likely to have close approaches to the Earth, require the least energy for capture. They are particularly easy to capture if they pass within one Earth radius of the surface of the Earth. They could be intercepted with intercontinental missiles if the latter were retrofit with a more flexible guiding and homing capability.more » This asteroid capture-defense system could be implemented in a few years at low cost by using decommissioned ICMs. The economic value of even one captured asteroid is many times the initial investment. The asteroid capture system would be an essential part of the learning curve for dealing with larger asteroids that can hit the earth.« less

Risk factors associated with capture-related death in eastern wild turkey hens

USGS Publications Warehouse

Nicholson, D.S.; Lochmiller, R.L.; Stewart, M.D.; Masters, R.E.; Leslie, David M.

2000-01-01

Capture-related mortality has been a notable risk in the handling of eastern wild turkey (Meleagris gallopavo silvestris). Our objective was to evaluate how environmental factors influence risk and identify physiological correlates that could be used to identify susceptible birds. During winter (January-March) 1995-97, 130 eastern wild turkey hens were captured in southeastern Oklahoma and radiocollared. Of those, 20 hens died ??? 14 days of capture. Serum creatine kinase activity (CK; P < 0.01), body temperature (P < 0.01), processing time (P = 0.02), and ambient temperature (P < 0.01) showed a positive relationship with mortality that occurred within 14 days of capture. Plasma corticosterone concentration (P = 0.08) and relative humidity (P < 0.01) showed a negative relationship with mortalities that occurred within 14 days post-capture. Stepwise logistic regression selected CK activity, relative humidity, and ambient temperature as the best predictors of mortality within 14 days post-capture. Our data suggest that susceptible individuals may be identified from CK activity and that capture-related mortality may be minimized by establishing guidelines of when to curtail capture operations based on various weather conditions.

Bench-Scale Process for Low-Cost Carbon Dioxide (CO2) Capture Using a Phase-Changing Absorbent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westendorf, Tiffany; Caraher, Joel; Chen, Wei

2015-03-31

The objective of this project is to design and build a bench-scale process for a novel phase-changing aminosilicone-based CO2-capture solvent. The project will establish scalability and technical and economic feasibility of using a phase-changing CO2-capture absorbent for post-combustion capture of CO2 from coal-fired power plants with 90% capture efficiency and 95% CO2 purity at a cost of $40/tonne of CO2 captured by 2025 and a cost of <$10/tonne of CO2 captured by 2035. In the first budget period of this project, the bench-scale phase-changing CO2 capture process was designed using data and operating experience generated under a previous project (ARPA-emore » project DE-AR0000084). Sizing and specification of all major unit operations was completed, including detailed process and instrumentation diagrams. The system was designed to operate over a wide range of operating conditions to allow for exploration of the effect of process variables on CO2 capture performance.« less

Research accomplished at the Knowledge Based Systems Lab: IDEF3, version 1.0

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Menzel, Christopher P.; Mayer, Paula S. D.

1991-01-01

An overview is presented of the foundations and content of the evolving IDEF3 process flow and object state description capture method. This method is currently in beta test. Ongoing efforts in the formulation of formal semantics models for descriptions captured in the outlined form and in the actual application of this method can be expected to cause an evolution in the method language. A language is described for the representation of process and object state centered system description. IDEF3 is a scenario driven process flow modeling methodology created specifically for these types of descriptive activities.

Three-dimensional imaging of cultural heritage artifacts with holographic printers

NASA Astrophysics Data System (ADS)

Kang, Hoonjong; Stoykova, Elena; Berberova, Nataliya; Park, Jiyong; Nazarova, Dimana; Park, Joo Sup; Kim, Youngmin; Hong, Sunghee; Ivanov, Branimir; Malinowski, Nikola

2016-01-01

Holography is defined as a two-steps process of capture and reconstruction of the light wavefront scattered from three-dimensional (3D) objects. Capture of the wavefront is possible due to encoding of both amplitude and phase in the hologram as a result of interference of the light beam coming from the object and mutually coherent reference beam. Three-dimensional imaging provided by holography motivates development of digital holographic imaging methods based on computer generation of holograms as a holographic display or a holographic printer. The holographic printing technique relies on combining digital 3D object representation and encoding of the holographic data with recording of analog white light viewable reflection holograms. The paper considers 3D contents generation for a holographic stereogram printer and a wavefront printer as a means of analogue recording of specific artifacts which are complicated objects with regards to conventional analog holography restrictions.

Visual object recognition for mobile tourist information systems

NASA Astrophysics Data System (ADS)

Paletta, Lucas; Fritz, Gerald; Seifert, Christin; Luley, Patrick; Almer, Alexander

2005-03-01

We describe a mobile vision system that is capable of automated object identification using images captured from a PDA or a camera phone. We present a solution for the enabling technology of outdoors vision based object recognition that will extend state-of-the-art location and context aware services towards object based awareness in urban environments. In the proposed application scenario, tourist pedestrians are equipped with GPS, W-LAN and a camera attached to a PDA or a camera phone. They are interested whether their field of view contains tourist sights that would point to more detailed information. Multimedia type data about related history, the architecture, or other related cultural context of historic or artistic relevance might be explored by a mobile user who is intending to learn within the urban environment. Learning from ambient cues is in this way achieved by pointing the device towards the urban sight, capturing an image, and consequently getting information about the object on site and within the focus of attention, i.e., the users current field of view.

Multi-metric calibration of hydrological model to capture overall flow regimes

NASA Astrophysics Data System (ADS)

Zhang, Yongyong; Shao, Quanxi; Zhang, Shifeng; Zhai, Xiaoyan; She, Dunxian

2016-08-01

Flow regimes (e.g., magnitude, frequency, variation, duration, timing and rating of change) play a critical role in water supply and flood control, environmental processes, as well as biodiversity and life history patterns in the aquatic ecosystem. The traditional flow magnitude-oriented calibration of hydrological model was usually inadequate to well capture all the characteristics of observed flow regimes. In this study, we simulated multiple flow regime metrics simultaneously by coupling a distributed hydrological model with an equally weighted multi-objective optimization algorithm. Two headwater watersheds in the arid Hexi Corridor were selected for the case study. Sixteen metrics were selected as optimization objectives, which could represent the major characteristics of flow regimes. Model performance was compared with that of the single objective calibration. Results showed that most metrics were better simulated by the multi-objective approach than those of the single objective calibration, especially the low and high flow magnitudes, frequency and variation, duration, maximum flow timing and rating. However, the model performance of middle flow magnitude was not significantly improved because this metric was usually well captured by single objective calibration. The timing of minimum flow was poorly predicted by both the multi-metric and single calibrations due to the uncertainties in model structure and input data. The sensitive parameter values of the hydrological model changed remarkably and the simulated hydrological processes by the multi-metric calibration became more reliable, because more flow characteristics were considered. The study is expected to provide more detailed flow information by hydrological simulation for the integrated water resources management, and to improve the simulation performances of overall flow regimes.

Demonstration of Advanced CO 2 Capture Process Improvements for Coal-Fired Flue Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carroll, John

This document summarizes the activities of Cooperative Agreement DE-FE0026590, “Demonstration of Advanced CO 2 Capture Process Improvements for Coal-Fired Flue Gas” during the performance period of October 1, 2015 through May 31, 2017. This project was funded by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). Southern Company Services, Inc. (SCS) was the prime contractor and co-funder of the project. Mitsubishi Heavy Industries America (MHIA) and AECOM were project team members. The overall project objective was to improve costs, energy requirements, and performance of an existing amine-based CO 2 capture process. This will occur via improvements inmore » three areas: 1. Reboiler design – The first objective of the program was to demonstrate performance of an integrated stripper/reboiler (termed Built-in Reboiler, or BIR) to reduce footprint, capital costs, and integration issues of the current technology. 2. Particulate management – The second objective was to carry out a Particulate Matter Management (PMM) test. This has the potential to reduce operating costs and capital costs due to the reduced or eliminated need for mechanical filtration. 3. Solvent – The third objective was to carry out a new solvent test plan (referred to as NSL) to demonstrate a new solvent (termed New Solvent A), which is expected to reduce regeneration steam. The bulk price is also expected to be lower than KS-1, which is the current solvent used in this process. NSL testing would include baseline testing, optimization, long term testing, solvent reclamation testing, and final inspection. These combine to form the Advanced Carbon Capture (ACC) technology. Much of this work will be applicable to generic solvent processes, especially in regards to improved reboiler design, and focused to meet or exceed the DOE’s overall carbon capture performance goals of 90% CO 2 capture rate with 95% CO 2 purity at a cost of $40/tonne of CO 2 by 2025 and at a cost of electricity (COE) 30% less than baseline CO 2 capture approaches by 2030. This project was divided into two phases. Phase 1 is the planning phase, and Phase 2 is the construction, operations, testing, and analysis phase. A down select occurred after Phase 1. Phase 1 activities were carried out during this reporting period, and therefore, Phase 1 activities are solely considered in this report. The project was not selected for Phase 2 funding.« less

Depth-aware image seam carving.

PubMed

Shen, Jianbing; Wang, Dapeng; Li, Xuelong

2013-10-01

Image seam carving algorithm should preserve important and salient objects as much as possible when changing the image size, while not removing the secondary objects in the scene. However, it is still difficult to determine the important and salient objects that avoid the distortion of these objects after resizing the input image. In this paper, we develop a novel depth-aware single image seam carving approach by taking advantage of the modern depth cameras such as the Kinect sensor, which captures the RGB color image and its corresponding depth map simultaneously. By considering both the depth information and the just noticeable difference (JND) model, we develop an efficient JND-based significant computation approach using the multiscale graph cut based energy optimization. Our method achieves the better seam carving performance by cutting the near objects less seams while removing distant objects more seams. To the best of our knowledge, our algorithm is the first work to use the true depth map captured by Kinect depth camera for single image seam carving. The experimental results demonstrate that the proposed approach produces better seam carving results than previous content-aware seam carving methods.

Spacecraft Stabilization and Control for Capture of Non-Cooperative Space Objects

NASA Technical Reports Server (NTRS)

Joshi, Suresh; Kelkar, Atul G.

2014-01-01

This paper addresses stabilization and control issues in autonomous capture and manipulation of non-cooperative space objects such as asteroids, space debris, and orbital spacecraft in need of servicing. Such objects are characterized by unknown mass-inertia properties, unknown rotational motion, and irregular shapes, which makes it a challenging control problem. The problem is further compounded by the presence of inherent nonlinearities, signi cant elastic modes with low damping, and parameter uncertainties in the spacecraft. Robust dissipativity-based control laws are presented and are shown to provide global asymptotic stability in spite of model uncertainties and nonlinearities. It is shown that robust stabilization can be accomplished via model-independent dissipativity-based controllers using thrusters alone, while stabilization with attitude and position control can be accomplished using thrusters and torque actuators.

Using Capture-Recapture Methods to Better Ascertain the Incidence of Fatal Child Maltreatment

ERIC Educational Resources Information Center

Palusci, Vincent J.; Wirtz, Stephen J.; Covington, Theresa M.

2010-01-01

Objectives: To (1) test the use of capture-recapture methods to estimate the total number of child maltreatment deaths in a single state using information from death certificates, child welfare reports, child death review teams, and uniform crime reports; and to (2) compare these estimates to the number of maltreatment deaths identified through an…

The interaction of feature and space based orienting within the attention set.

PubMed

Lim, Ahnate; Sinnett, Scott

2014-01-01

The processing of sensory information relies on interacting mechanisms of sustained attention and attentional capture, both of which operate in space and on object features. While evidence indicates that exogenous attentional capture, a mechanism previously understood to be automatic, can be eliminated while concurrently performing a demanding task, we reframe this phenomenon within the theoretical framework of the "attention set" (Most et al., 2005). Consequently, the specific prediction that cuing effects should reappear when feature dimensions of the cue overlap with those in the attention set (i.e., elements of the demanding task) was empirically tested and confirmed using a dual-task paradigm involving both sustained attention and attentional capture, adapted from Santangelo et al. (2007). Participants were required to either detect a centrally presented target presented in a stream of distractors (the primary task), or respond to a spatially cued target (the secondary task). Importantly, the spatial cue could either share features with the target in the centrally presented primary task, or not share any features. Overall, the findings supported the attention set hypothesis showing that a spatial cuing effect was only observed when the peripheral cue shared a feature with objects that were already in the attention set (i.e., the primary task). However, this finding was accompanied by differential attentional orienting dependent on the different types of objects within the attention set, with feature-based orienting occurring for target-related objects, and additional spatial-based orienting for distractor-related objects.

The interaction of feature and space based orienting within the attention set

PubMed Central

Lim, Ahnate; Sinnett, Scott

2014-01-01

The processing of sensory information relies on interacting mechanisms of sustained attention and attentional capture, both of which operate in space and on object features. While evidence indicates that exogenous attentional capture, a mechanism previously understood to be automatic, can be eliminated while concurrently performing a demanding task, we reframe this phenomenon within the theoretical framework of the “attention set” (Most et al., 2005). Consequently, the specific prediction that cuing effects should reappear when feature dimensions of the cue overlap with those in the attention set (i.e., elements of the demanding task) was empirically tested and confirmed using a dual-task paradigm involving both sustained attention and attentional capture, adapted from Santangelo et al. (2007). Participants were required to either detect a centrally presented target presented in a stream of distractors (the primary task), or respond to a spatially cued target (the secondary task). Importantly, the spatial cue could either share features with the target in the centrally presented primary task, or not share any features. Overall, the findings supported the attention set hypothesis showing that a spatial cuing effect was only observed when the peripheral cue shared a feature with objects that were already in the attention set (i.e., the primary task). However, this finding was accompanied by differential attentional orienting dependent on the different types of objects within the attention set, with feature-based orienting occurring for target-related objects, and additional spatial-based orienting for distractor-related objects. PMID:24523682

Evaluation of sea otter capture after the Exxon Valdez oil spill, Prince William Sound, Alaska

USGS Publications Warehouse

Bodkin, James L.; Weltz, F.; Bayha, Keith; Kormendy, Jennifer

1990-01-01

After the T/V Exxon Valdez oil spill into Prince William Sound, the U.S. Fish and Wildlife Service and Exxon Company, U.S.A., began rescuing sea otters (Enhydra lutris). The primary objective of this operation was to capture live, oiled sea otters for cleaning and rehabilitation. Between 30 March and 29 May 1989, 139 live sea otters were captured in the sound and transported to rehabilitation centers in Valdez, Alaska. Within the first 15 days of capture operations, 122 (88%) otters were captured. Most sea otters were captured near Knight, Green, and Evans islands in the western sound. The primary capture method consisted of dipnetting otters out of water and off beaches. While capture rates declined over time, survival of captured otters increased as the interval from spill date to capture date increased. The relative degree of oiling observed for each otter captured declined over time. Declining capture rates led to the use of tangle nets. The evidence suggests the greatest threat to sea otters in Prince William Sound occurred within the first 3 weeks after the spill. Thus, in the future, the authors believe rescue efforts should begin as soon as possible after an oil spill in sea otter habitat. Further, preemptive capture and relocation of sea otters in Prince William Sound may have increased the number of otters that could have survived this event.

Whistleblowing in academic medicine

PubMed Central

Rhodes, R; Strain, J

2004-01-01

The authors present and discuss cases of academic medicine failing to address unethical behaviour in academic science and, thereby, illustrate the scope and seriousness of the problem. The Olivieri/Apotex affair is just another instance of academic medicine's dereliction in a case of scientific fraud and misconduct. Instead of vigorously supporting their faculty member in her efforts to honestly communicate her findings and to protect patients from the risks associated with the use of the study drug, the University of Toronto collaborated with the Apotex company's "stalling tactics," closed down Dr Olivieri's laboratory, harassed her, and ultimately dismissed her. The authors argue that the incentives for addressing problematic behaviour have to be revised in order to effect a change in the current pattern of response that occurs in academic medicine. An externally imposed realignment of incentives could convert the perception of the whistleblower, from their present caste as the enemy within, into a new position, as valued friend of the institution. The authors explain how such a correction could encourage appropriate reactions to scientific misconduct from academic medicine. PMID:14872069

Reserves as tools for alleviating impacts of marine disease

PubMed Central

Wenger, Amelia S.; Devlin, Michelle J.; Ceccarelli, Daniela M.; Williamson, David H.; Willis, Bette L.

2016-01-01

Marine protected areas can prevent over-exploitation, but their effect on marine diseases is less clear. We examined how marine reserves can reduce diseases affecting reef-building corals following acute and chronic disturbances. One year after a severe tropical cyclone, corals inside reserves had sevenfold lower levels of disease than those in non-reserves. Similarly, disease prevalence was threefold lower on reserve reefs following chronic exposure to terrestrial run-off from a degraded river catchment, when exposure duration was below the long-term site average. Examination of 35 predictor variables indicated that lower levels of derelict fishing line and injured corals inside reserves were correlated with lower levels of coral disease in both case studies, signifying that successful disease mitigation occurs when activities that damage reefs are restricted. Conversely, reserves were ineffective in moderating disease when sites were exposed to higher than average levels of run-off, demonstrating that reductions in water quality undermine resilience afforded by reserve protection. In addition to implementing protected areas, we highlight that disease management efforts should also target improving water quality and limiting anthropogenic activities that cause injury. PMID:26880842

Reserves as tools for alleviating impacts of marine disease.

PubMed

Lamb, Joleah B; Wenger, Amelia S; Devlin, Michelle J; Ceccarelli, Daniela M; Williamson, David H; Willis, Bette L

2016-03-05

Marine protected areas can prevent over-exploitation, but their effect on marine diseases is less clear. We examined how marine reserves can reduce diseases affecting reef-building corals following acute and chronic disturbances. One year after a severe tropical cyclone, corals inside reserves had sevenfold lower levels of disease than those in non-reserves. Similarly, disease prevalence was threefold lower on reserve reefs following chronic exposure to terrestrial run-off from a degraded river catchment, when exposure duration was below the long-term site average. Examination of 35 predictor variables indicated that lower levels of derelict fishing line and injured corals inside reserves were correlated with lower levels of coral disease in both case studies, signifying that successful disease mitigation occurs when activities that damage reefs are restricted. Conversely, reserves were ineffective in moderating disease when sites were exposed to higher than average levels of run-off, demonstrating that reductions in water quality undermine resilience afforded by reserve protection. In addition to implementing protected areas, we highlight that disease management efforts should also target improving water quality and limiting anthropogenic activities that cause injury. © 2016 The Author(s).

Marine Litter Distribution and Density in European Seas, from the Shelves to Deep Basins

PubMed Central

Pham, Christopher K.; Ramirez-Llodra, Eva; Alt, Claudia H. S.; Amaro, Teresa; Bergmann, Melanie; Canals, Miquel; Company, Joan B.; Davies, Jaime; Duineveld, Gerard; Galgani, François; Howell, Kerry L.; Huvenne, Veerle A. I.; Isidro, Eduardo; Jones, Daniel O. B.; Lastras, Galderic; Morato, Telmo; Gomes-Pereira, José Nuno; Purser, Autun; Stewart, Heather; Tojeira, Inês; Tubau, Xavier; Van Rooij, David; Tyler, Paul A.

2014-01-01

Anthropogenic litter is present in all marine habitats, from beaches to the most remote points in the oceans. On the seafloor, marine litter, particularly plastic, can accumulate in high densities with deleterious consequences for its inhabitants. Yet, because of the high cost involved with sampling the seafloor, no large-scale assessment of distribution patterns was available to date. Here, we present data on litter distribution and density collected during 588 video and trawl surveys across 32 sites in European waters. We found litter to be present in the deepest areas and at locations as remote from land as the Charlie-Gibbs Fracture Zone across the Mid-Atlantic Ridge. The highest litter density occurs in submarine canyons, whilst the lowest density can be found on continental shelves and on ocean ridges. Plastic was the most prevalent litter item found on the seafloor. Litter from fishing activities (derelict fishing lines and nets) was particularly common on seamounts, banks, mounds and ocean ridges. Our results highlight the extent of the problem and the need for action to prevent increasing accumulation of litter in marine environments. PMID:24788771

Indicators of fishing mortality on reef-shark populations in the world's first shark sanctuary: the need for surveillance and enforcement

NASA Astrophysics Data System (ADS)

Vianna, Gabriel M. S.; Meekan, Mark G.; Ruppert, Jonathan L. W.; Bornovski, Tova H.; Meeuwig, Jessica J.

2016-09-01

Shark sanctuaries are promoted as a management tool to achieve conservation goals following global declines of shark populations. We assessed the status of reef-shark populations and indicators of fishing pressure across the world's first shark sanctuary in Palau. Using underwater surveys and stereophotogrammetry, we documented large differences in abundance and size structure of shark populations across the sanctuary, with a strong negative relationship between shark densities and derelict fishing gear on reefs. Densities of 10.9 ± 4.7 (mean ± SE) sharks ha-1 occurred on reefs adjacent to the most populated islands of Palau, contrasting with lower densities of 1.6 ± 0.8 sharks ha-1 on remote uninhabited reefs, where surveillance and enforcement was limited. Our observations suggest that fishing still remains a major factor structuring shark populations in Palau, demonstrating that there is an urgent need for better enforcement and surveillance that targets both illegal and licensed commercial fisheries to provide effective protection for sharks within the sanctuary.

AIS Spectra for Stressed and Unstressed Plant Communities in the Carolina Slate Belt

NASA Technical Reports Server (NTRS)

Wickland, D. E.

1985-01-01

Airborne imaging spectrometer (AIS) data were collected over a number of derelict heavy metal mine sites in the Carolina slate belt of North Carolina. A 32 channel (1156 to 1456 nm) data set was acquired in October, 1983 at the time of peak fall foliage display, and a 128 channel (1220 to 2420) data set was acquired near the end of the spring leaf flush in May, 1984. Spectral curves were extracted from the AIS data for differing ground cover types (e.g., pine forests, mixed deciduous forests, mine sites, and pastures). Variation in the width of an absorption feature located at approximately 1190 nm has been related to differences in forest type. Small differences in the location and shape of features in the near infrared plateau (1156 to 1300 nm) and the region 2000 to 2420 nm have yet to be evaluated. Because these variations were subtle, and because atmospheric effects were apparent in the data, high priority must be assigned to devising a means of removing atmospheric effects from AIS spectra.

System and method for authentication

DOEpatents

Duerksen, Gary L.; Miller, Seth A.

2015-12-29

Described are methods and systems for determining authenticity. For example, the method may include providing an object of authentication, capturing characteristic data from the object of authentication, deriving authentication data from the characteristic data of the object of authentication, and comparing the authentication data with an electronic database comprising reference authentication data to provide an authenticity score for the object of authentication. The reference authentication data may correspond to one or more reference objects of authentication other than the object of authentication.

An Overabundance of Black Hole X-Ray Binaries in the Galactic Center from Tidal Captures

NASA Astrophysics Data System (ADS)

Generozov, A.; Stone, N. C.; Metzger, B. D.; Ostriker, J. P.

2018-05-01

A large population of X-ray binaries (XRBs) was recently discovered within the central parsec of the Galaxy by Hailey et al. (2018). While the presence of compact objects on this scale due to radial mass segregation is, in itself, unsurprising, the fraction of binaries would naively be expected to be small because of how easily primordial binaries are dissociated in the dynamically hot environment of the nuclear star cluster (NSC). We propose that the formation of XRBs in the central parsec is dominated by the tidal capture of stars by black holes (BHs) and neutron stars (NSs). We model the time-dependent radial density profiles of stars and compact objects in the NSC with a Fokker-Planck approach, using the present-day stellar population and rate of in situ massive star (and thus compact object) formation as observational constraints. Of the ˜1 - 4 × 104 BHs that accumulate in the central parsec over the age of the Galaxy, we predict that ˜60 - 200 currently exist as BH-XRBs formed from tidal capture, consistent with the population seen by Hailey et al. (2018). A somewhat lower number of tidal capture NS-XRBs is also predicted. We also use our observationally calibrated models for the NSC to predict rates of other exotic dynamical processes, such as the tidal disruption of stars by the central supermassive black hole (˜10-4 per year at z=0).

Pressurized fluidized-bed hydroretorting of Eastern oil shales -- Sulfur control. Topical report for Subtask 3.1, In-bed sulfur capture tests; Subtask 3.2, Electrostatic desulfurization; Subtask 3.3, Microbial desulfurization and denitrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, M.J.; Abbasian, J.; Akin, C.

1992-05-01

This topical report on ``Sulfur Control`` presents the results of work conducted by the Institute of Gas Technology (IGT), the Illinois Institute of Technology (IIT), and the Ohio State University (OSU) to develop three novel approaches for desulfurization that have shown good potential with coal and could be cost-effective for oil shales. These are (1) In-Bed Sulfur Capture using different sorbents (IGT), (2) Electrostatic Desulfurization (IIT), and (3) Microbial Desulfurization and Denitrification (OSU and IGT). The objective of the task on In-Bed Sulfur Capture was to determine the effectiveness of different sorbents (that is, limestone, calcined limestone, dolomite, and siderite)more » for capturing sulfur (as H{sub 2}S) in the reactor during hydroretorting. The objective of the task on Electrostatic Desulfurization was to determine the operating conditions necessary to achieve a high degree of sulfur removal and kerogen recovery in IIT`s electrostatic separator. The objectives of the task on Microbial Desulfurization and Denitrification were to (1) isolate microbial cultures and evaluate their ability to desulfurize and denitrify shale, (2) conduct laboratory-scale batch and continuous tests to improve and enhance microbial removal of these components, and (3) determine the effects of processing parameters, such as shale slurry concentration, solids settling characteristics, agitation rate, and pH on the process.« less

A video-based system for hand-driven stop-motion animation.

PubMed

Han, Xiaoguang; Fu, Hongbo; Zheng, Hanlin; Liu, Ligang; Wang, Jue

2013-01-01

Stop-motion is a well-established animation technique but is often laborious and requires craft skills. A new video-based system can animate the vast majority of everyday objects in stop-motion style, more flexibly and intuitively. Animators can perform and capture motions continuously instead of breaking them into increments and shooting one still picture per increment. More important, the system permits direct hand manipulation without resorting to rigs, achieving more natural object control for beginners. The system's key component is two-phase keyframe-based capturing and processing, assisted by computer vision techniques. With this system, even amateurs can generate high-quality stop-motion animations.

Software support environment design knowledge capture

NASA Technical Reports Server (NTRS)

Dollman, Tom

1990-01-01

The objective of this task is to assess the potential for using the software support environment (SSE) workstations and associated software for design knowledge capture (DKC) tasks. This assessment will include the identification of required capabilities for DKC and hardware/software modifications needed to support DKC. Several approaches to achieving this objective are discussed and interim results are provided: (1) research into the problem of knowledge engineering in a traditional computer-aided software engineering (CASE) environment, like the SSE; (2) research into the problem of applying SSE CASE tools to develop knowledge based systems; and (3) direct utilization of SSE workstations to support a DKC activity.

Highlight removal based on the regional-projection fringe projection method

NASA Astrophysics Data System (ADS)

Qi, Zhaoshuai; Wang, Zhao; Huang, Junhui; Xing, Chao; Gao, Jianmin

2018-04-01

In fringe projection profilometry, highlight usually causes the saturation and blooming in captured fringes and reduces the measurement accuracy. To solve the problem, a regional-projection fringe projection (RP-FP) method is proposed. Regional projection patterns (RP patterns) are projected onto the tested object surface to avoid the saturation and blooming. Then, an image inpainting technique is employed to reconstruct the missing phases in the captured RP patterns and a complete surface of the tested object is obtained. Experiments verified the effectiveness of the proposed method. The method can be widely used in industrial inspections and quality controlling in mechanical and manufacturing industries.

TLS for generating multi-LOD of 3D building model

NASA Astrophysics Data System (ADS)

Akmalia, R.; Setan, H.; Majid, Z.; Suwardhi, D.; Chong, A.

2014-02-01

The popularity of Terrestrial Laser Scanners (TLS) to capture three dimensional (3D) objects has been used widely for various applications. Development in 3D models has also led people to visualize the environment in 3D. Visualization of objects in a city environment in 3D can be useful for many applications. However, different applications require different kind of 3D models. Since a building is an important object, CityGML has defined a standard for 3D building models at four different levels of detail (LOD). In this research, the advantages of TLS for capturing buildings and the modelling process of the point cloud can be explored. TLS will be used to capture all the building details to generate multi-LOD. This task, in previous works, involves usually the integration of several sensors. However, in this research, point cloud from TLS will be processed to generate the LOD3 model. LOD2 and LOD1 will then be generalized from the resulting LOD3 model. Result from this research is a guiding process to generate the multi-LOD of 3D building starting from LOD3 using TLS. Lastly, the visualization for multi-LOD model will also be shown.

Camouflage, detection and identification of moving targets.

PubMed

Hall, Joanna R; Cuthill, Innes C; Baddeley, Roland; Shohet, Adam J; Scott-Samuel, Nicholas E

2013-05-07

Nearly all research on camouflage has investigated its effectiveness for concealing stationary objects. However, animals have to move, and patterns that only work when the subject is static will heavily constrain behaviour. We investigated the effects of different camouflages on the three stages of predation-detection, identification and capture-in a computer-based task with humans. An initial experiment tested seven camouflage strategies on static stimuli. In line with previous literature, background-matching and disruptive patterns were found to be most successful. Experiment 2 showed that if stimuli move, an isolated moving object on a stationary background cannot avoid detection or capture regardless of the type of camouflage. Experiment 3 used an identification task and showed that while camouflage is unable to slow detection or capture, camouflaged targets are harder to identify than uncamouflaged targets when similar background objects are present. The specific details of the camouflage patterns have little impact on this effect. If one has to move, camouflage cannot impede detection; but if one is surrounded by similar targets (e.g. other animals in a herd, or moving background distractors), then camouflage can slow identification. Despite previous assumptions, motion does not entirely 'break' camouflage.

Posture recognition associated with lifting of heavy objects using Kinect and Adaboost

NASA Astrophysics Data System (ADS)

Raut, Sayli; Navaneethakrishna, M.; Ramakrishnan, S.

2017-12-01

Lifting of heavy objects is the common task in the industries. Recent statistics from the Bureau of Labour indicate, back injuries account for one of every five injuries in the workplace. Eighty per cent of these injuries occur to the lower back and are associated with manual materials handling tasks. According to the Industrial ergonomic safety manual, Squatting is the correct posture for lifting a heavy object. In this work, an attempt has been made to monitor posture of the workers during squat and stoop using 3D motion capture and machine learning techniques. For this, Microsoft Kinect V2 is used for capturing the depth data. Further, Dynamic Time Warping and Euclidian distance algorithms are used for extraction of features. Ada-boost algorithm is used for classification of stoop and squat. The results show that the 3D image data is large and complex to analyze. The application of nonlinear and linear metrics captures the variation in the lifting pattern. Additionally, the features extracted from this metric resulted in a classification accuracy of 85% and 81% respectively. This framework may be put-upon to alert the workers in the industrial ergonomic environments.

What Is "Enterprise Education?" An Analysis of the Objectives and Methods of Enterprise Education Programmes in Four European Countries

ERIC Educational Resources Information Center

Hytti, Ulla; O'Gorman, Colm

2004-01-01

This paper explores what constitutes "enterprise education" in four European countries. It proposes a conceptual schema for capturing the various objectives of enterprise education programmes and initiatives. This conceptual schema is then used to categorise the objectives of 50 enterprise programmes from Austria, Finland, Ireland, and…

Scalable Photogrammetric Motion Capture System "mosca": Development and Application

NASA Astrophysics Data System (ADS)

Knyaz, V. A.

2015-05-01

Wide variety of applications (from industrial to entertainment) has a need for reliable and accurate 3D information about motion of an object and its parts. Very often the process of movement is rather fast as in cases of vehicle movement, sport biomechanics, animation of cartoon characters. Motion capture systems based on different physical principles are used for these purposes. The great potential for obtaining high accuracy and high degree of automation has vision-based system due to progress in image processing and analysis. Scalable inexpensive motion capture system is developed as a convenient and flexible tool for solving various tasks requiring 3D motion analysis. It is based on photogrammetric techniques of 3D measurements and provides high speed image acquisition, high accuracy of 3D measurements and highly automated processing of captured data. Depending on the application the system can be easily modified for different working areas from 100 mm to 10 m. The developed motion capture system uses from 2 to 4 technical vision cameras for video sequences of object motion acquisition. All cameras work in synchronization mode at frame rate up to 100 frames per second under the control of personal computer providing the possibility for accurate calculation of 3D coordinates of interest points. The system was used for a set of different applications fields and demonstrated high accuracy and high level of automation.

Optimizing Sampling Design to Deal with Mist-Net Avoidance in Amazonian Birds and Bats

PubMed Central

Marques, João Tiago; Ramos Pereira, Maria J.; Marques, Tiago A.; Santos, Carlos David; Santana, Joana; Beja, Pedro; Palmeirim, Jorge M.

2013-01-01

Mist netting is a widely used technique to sample bird and bat assemblages. However, captures often decline with time because animals learn and avoid the locations of nets. This avoidance or net shyness can substantially decrease sampling efficiency. We quantified the day-to-day decline in captures of Amazonian birds and bats with mist nets set at the same location for four consecutive days. We also evaluated how net avoidance influences the efficiency of surveys under different logistic scenarios using re-sampling techniques. Net avoidance caused substantial declines in bird and bat captures, although more accentuated in the latter. Most of the decline occurred between the first and second days of netting: 28% in birds and 47% in bats. Captures of commoner species were more affected. The numbers of species detected also declined. Moving nets daily to minimize the avoidance effect increased captures by 30% in birds and 70% in bats. However, moving the location of nets may cause a reduction in netting time and captures. When moving the nets caused the loss of one netting day it was no longer advantageous to move the nets frequently. In bird surveys that could even decrease the number of individuals captured and species detected. Net avoidance can greatly affect sampling efficiency but adjustments in survey design can minimize this. Whenever nets can be moved without losing netting time and the objective is to capture many individuals, they should be moved daily. If the main objective is to survey species present then nets should still be moved for bats, but not for birds. However, if relocating nets causes a significant loss of netting time, moving them to reduce effects of shyness will not improve sampling efficiency in either group. Overall, our findings can improve the design of mist netting sampling strategies in other tropical areas. PMID:24058579

Immunity to Attentional Capture at Ignored Locations

PubMed Central

Ruthruff, Eric; Gaspelin, Nicholas

2017-01-01

Certain stimuli have the power to rapidly and involuntarily capture spatial attention against our will. The present study investigated whether such stimuli capture spatial attention even when they appear in ignored regions of visual space. In other words, which force is more powerful: attentional capture or spatial filtering? Participants performed a spatial cuing task, searching for a letter target defined by color (e.g., green) and then reporting that letter’s identity. Two of the four search locations were always irrelevant. Unlike many previous experiments, participants were forced to ignore these locations because they always contained a target-colored distractor letter. Experiment 1 assessed capture by a salient-but-irrelevant abrupt onset cue appearing 150 ms before the search display. One might expect onset cues to capture attention even at ignored locations given that the main function of capture, presumably, is to rapidly alert observers to unexpected yet potentially important stimuli. However, they did not. Experiment 2 replicated this result with a different neutral baseline condition. Experiment 3 replicated the absence of capture effects at ignored locations with an even more potent stimulus: a relevant cue possessing the target color. We propose that people are effectively immune to attentional capture by objects in ignored locations – spatial filtering dominates attentional capture. PMID:29116615

Attentional capture by alcohol-related stimuli may be activated involuntarily by top-down search goals.

PubMed

Brown, Chris R H; Duka, Theodora; Forster, Sophie

2018-04-25

Previous research has found that the attention of social drinkers is preferentially oriented towards alcohol-related stimuli (attentional capture). This is argued to play a role in escalating craving for alcohol that can result in hazardous drinking. According to incentive theories of drug addiction, the stimuli associated with the drug reward acquire learned incentive salience and grab attention. However, it is not clear whether the mechanism by which this bias is created is a voluntary or an automatic one, although some evidence suggests a stimulus-driven mechanism. Here, we test for the first time whether this attentional capture could reflect an involuntary consequence of a goal-driven mechanism. Across three experiments, participants were given search goals to detect either an alcoholic or a non-alcoholic object (target) in a stream of briefly presented objects unrelated to the target. Prior to the target, a task-irrelevant parafoveal distractor appeared. This could either be congruent or incongruent with the current search goal. Applying a meta-analysis, we combined the results across the three experiments and found consistent evidence of goal-driven attentional capture, whereby alcohol distractors impeded target detection when the search goal was for alcohol. By contrast, alcohol distractors did not interfere with target detection, whilst participants were searching for a non-alcoholic category. A separate experiment revealed that the goal-driven capture effect was not found when participants held alcohol features active in memory but did not intentionally search for them. These findings suggest a strong goal-driven account of attentional capture by alcohol cues in social drinkers.

Electrochemical Membrane for Carbon Dioxide Capture and Power Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghezel-Ayagh, Hossein

FuelCell Energy, Inc. (FCE), in collaboration with AECOM Corporation (formerly URS Corporation) and Pacific Northwest National Laboratory, has been developing a novel Combined Electric Power and Carbon-dioxide Separation (CEPACS) system. The CEPACS system is based on electrochemical membrane (ECM) technology derived from FCE’s carbonate fuel cell products featuring internal (methane steam) reforming and carrying the trade name of Direct FuelCell®. The unique chemistry of carbonate fuel cells offers an innovative approach for separation of CO 2 from existing fossil-fuel power plant exhaust streams (flue gases). The ECM-based CEPACS system has the potential to become a transformational CO 2-separation technology bymore » working as two devices in one: it separates the CO 2 from the exhaust of other plants such as an existing coal-fired plant and simultaneously produces clean electric power at high efficiency using a supplementary fuel. The development effort was carried out under the U.S. Department of Energy (DOE) cooperative agreement DE-FE0007634. The overall objective of this project was to successfully demonstrate the ability of FCE’s ECM-based CEPACS system technology to separate ≥90% of the CO 2 from a simulated Pulverized Coal (PC) power plant flue gas stream and to compress the captured CO2 to a state that can be easily transported for sequestration or beneficial use. In addition, a key objective was to show, through the technical and economic feasibility study and bench scale testing, that the ECM-based CEPACS system is an economical alternative for CO 2 capture in PC power plants, and that it meets DOE’s objective related to the incremental cost of electricity (COE) for post-combustion CO 2 capture (no more than 35% increase in COE). The project was performed in three budget periods (BP). The specific objective for BP1 was to complete the Preliminary Technical and Economic Feasibility Study. The T&EF study was based on the carbon capture system size suitable for a reference 550 MW PC power plant. The specific objectives for BP2 were to perform (flue gas) contaminant effect evaluation tests, small area membrane tests using clean simulated flue gas, design a flue gas pretreatment system for processing of the gas feed to ECM, update the Technical & Economic Feasibility Study (T&EFS) incorporating results of contaminant effect tests and small area membrane tests, and to prepare a test facility for bench scale testing. The specific objectives for BP3 were to perform bench scale testing (parametric and long-duration testing) of a 11.7 m 2 ECM-based CO 2 capture, purification and compression system, and update (as final) the Technical and Economic Feasibility Study. In addition, an Environmental Health and Safety evaluation (assessment) of the ECM technology was included. This final technical report presents the progress made under the project.« less

Minimoons & drifters

NASA Astrophysics Data System (ADS)

Jedicke, R.; Bolin, B.; Chyba, M.; Fedorets, G.; Granvik, M.; Patterson, G.; Vaubaillon, J.

2014-07-01

We will present an overview of our recent work on understanding the population of natural objects that are temporarily captured in the Earth-Moon system. We use the term 'minimoon' to refer to objects that i) have negative total energy (kinetic+potential) relative to the Earth-Moon barycenter that ii) make at least one full revolution around the barycenter in a co-rotating frame relative to the Earth-Sun axis iii) while they are within 3 Earth Hill-sphere radii. There has been one confirmed minimoon, the 2-3 meter diameter object designated 2006 RH_{120} that was discovered by the Catalina Sky Survey [1]. That object's size, capture duration, geocentric trajectory, and pre-and post-capture heliocentric orbits are in perfect agreement with the minimoon model proposed by Granvik et al. (2012) [2]. We expect that there are one or two 1 to 2 meter diameter minimoons in the steady state population at any time and about a dozen larger than 50 cm diameter. Minimoons have an average lifetime of about 9 months. 'Drifters' are like minimoons except that they do not fulfill the requirement of making at least one revolution in the Earth-Moon system. The population of drifters is about 10× the minimoon population so that the largest drifter in the steady state is about 5-10 meters in diameter and there are perhaps ten of about 1 meter diameter at any time. The combined population of minimoons and drifters, henceforth 'cis-lunar objects' (CLO), provide a formerly unrecognized opportunity for scientific exploration and testing concepts for in-situ resource utilization [3]. They could provide large samples of main-belt asteroids that are unaffected by passage through Earth's atmosphere or weathering on the ground, with the added convenience of already being gravitationally bound in the Earth-Moon system. The CLOs provide interesting challenges for rendezvous missions because of their limited lifetime and non-elliptical trajectories while they are bound objects [4]. The problem is that detecting the CLOs is difficult -- they are small, captured for only limited time periods, and their apparent rates of motion are more like artificial satellites than the more distant NEOs [5]. New technology may enable the detection of a small number of CLOs from the ground in the next few years [5,6] but the only way to discover a reliable stream of these interesting objects is from a space-based platform.

A class Hierarchical, object-oriented approach to virtual memory management

NASA Technical Reports Server (NTRS)

Russo, Vincent F.; Campbell, Roy H.; Johnston, Gary M.

1989-01-01

The Choices family of operating systems exploits class hierarchies and object-oriented programming to facilitate the construction of customized operating systems for shared memory and networked multiprocessors. The software is being used in the Tapestry laboratory to study the performance of algorithms, mechanisms, and policies for parallel systems. Described here are the architectural design and class hierarchy of the Choices virtual memory management system. The software and hardware mechanisms and policies of a virtual memory system implement a memory hierarchy that exploits the trade-off between response times and storage capacities. In Choices, the notion of a memory hierarchy is captured by abstract classes. Concrete subclasses of those abstractions implement a virtual address space, segmentation, paging, physical memory management, secondary storage, and remote (that is, networked) storage. Captured in the notion of a memory hierarchy are classes that represent memory objects. These classes provide a storage mechanism that contains encapsulated data and have methods to read or write the memory object. Each of these classes provides specializations to represent the memory hierarchy.

Silica aerogel for capturing intact interplanetary dust particles for the Tanpopo experiment.

PubMed

Tabata, Makoto; Yano, Hajime; Kawai, Hideyuki; Imai, Eiichi; Kawaguchi, Yuko; Hashimoto, Hirofumi; Yamagishi, Akihiko

2015-06-01

In this paper, we report the progress in developing a silica-aerogel-based cosmic dust capture panel for use in the Tanpopo experiment on the International Space Station (ISS). Previous studies revealed that ultralow-density silica aerogel tiles, comprising two layers with densities of 0.01 and 0.03 g/cm(3) developed using our production technique, were suitable for achieving the scientific objectives of the astrobiological mission. A special density configuration (i.e., box framing) aerogel with a holder was designed to construct the capture panels. Qualification tests for an engineering model of the capture panel as an instrument aboard the ISS were successful. Sixty box-framing aerogel tiles were manufactured in a contamination-controlled environment.

Additivity of abrupt onset effects supports nonspatial distraction, not the capture of spatial attention.

PubMed

Folk, Charles L; Remington, Roger W; Wu, Shu-Chieh

2009-02-01

In a recent article, Schreij, Owens, and Theeuwes (2008) reported that abruptly onsetting distractors produce costs in performance even when spatial-cuing effects confirm the presence of a top-down set for color. The authors argued that these results show that abruptly onsetting new objects capture attention independent of a top-down set and, thus, provide conclusive evidence against the theory that attentional capture is contingent on top-down attentional control settings (Folk, Remington, & Johnston, 1992). In the following article, we argue that, contrary to the conclusion drawn by Schreij et al., their own data (1) disconfirm the claim that their abrupt onsets captured spatial attention and (2) are consistent with nonspatial interference accounts of singleton-distractor effects. In support of the nonspatial account, we show that in a paradigm similar to Schreij et al.'s, distractors that do not capture attention can nonetheless influence responses to a target. We conclude that the results of Schreij et al. do not represent a challenge to contingent capture theory.

Last chance for carbon capture and storage

NASA Astrophysics Data System (ADS)

Scott, Vivian; Gilfillan, Stuart; Markusson, Nils; Chalmers, Hannah; Haszeldine, R. Stuart

2013-02-01

Anthropogenic energy-related CO2 emissions are higher than ever. With new fossil-fuel power plants, growing energy-intensive industries and new sources of fossil fuels in development, further emissions increase seems inevitable. The rapid application of carbon capture and storage is a much heralded means to tackle emissions from both existing and future sources. However, despite extensive and successful research and development, progress in deploying carbon capture and storage has stalled. No fossil-fuel power plants, the greatest source of CO2 emissions, are using carbon capture and storage, and publicly supported demonstration programmes are struggling to deliver actual projects. Yet, carbon capture and storage remains a core component of national and global emissions-reduction scenarios. Governments have to either increase commitment to carbon capture and storage through much more active market support and emissions regulation, or accept its failure and recognize that continued expansion of power generation from burning fossil fuels is a severe threat to attaining objectives in mitigating climate change.

3D morphology reconstruction using linear array CCD binocular stereo vision imaging system

NASA Astrophysics Data System (ADS)

Pan, Yu; Wang, Jinjiang

2018-01-01

Binocular vision imaging system, which has a small field of view, cannot reconstruct the 3-D shape of the dynamic object. We found a linear array CCD binocular vision imaging system, which uses different calibration and reconstruct methods. On the basis of the binocular vision imaging system, the linear array CCD binocular vision imaging systems which has a wider field of view can reconstruct the 3-D morphology of objects in continuous motion, and the results are accurate. This research mainly introduces the composition and principle of linear array CCD binocular vision imaging system, including the calibration, capture, matching and reconstruction of the imaging system. The system consists of two linear array cameras which were placed in special arrangements and a horizontal moving platform that can pick up objects. The internal and external parameters of the camera are obtained by calibrating in advance. And then using the camera to capture images of moving objects, the results are then matched and 3-D reconstructed. The linear array CCD binocular vision imaging systems can accurately measure the 3-D appearance of moving objects, this essay is of great significance to measure the 3-D morphology of moving objects.

A Study of Light Level Effect on the Accuracy of Image Processing-based Tomato Grading

NASA Astrophysics Data System (ADS)

Prijatna, D.; Muhaemin, M.; Wulandari, R. P.; Herwanto, T.; Saukat, M.; Sugandi, W. K.

2018-05-01

Image processing method has been used in non-destructive tests of agricultural products. Compared to manual method, image processing method may produce more objective and consistent results. Image capturing box installed in currently used tomato grading machine (TEP-4) is equipped with four fluorescence lamps to illuminate the processed tomatoes. Since the performance of any lamp will decrease if its service time has exceeded its lifetime, it is predicted that this will affect tomato classification. The objective of this study was to determine the minimum light levels which affect classification accuracy. This study was conducted by varying light level from minimum and maximum on tomatoes in image capturing boxes and then investigates its effects on image characteristics. Research results showed that light intensity affects two variables which are important for classification, for example, area and color of captured image. Image processing program was able to determine correctly the weight and classification of tomatoes when light level was 30 lx to 140 lx.

FlyCap: Markerless Motion Capture Using Multiple Autonomous Flying Cameras.

PubMed

Xu, Lan; Liu, Yebin; Cheng, Wei; Guo, Kaiwen; Zhou, Guyue; Dai, Qionghai; Fang, Lu

2017-07-18

Aiming at automatic, convenient and non-instrusive motion capture, this paper presents a new generation markerless motion capture technique, the FlyCap system, to capture surface motions of moving characters using multiple autonomous flying cameras (autonomous unmanned aerial vehicles(UAVs) each integrated with an RGBD video camera). During data capture, three cooperative flying cameras automatically track and follow the moving target who performs large-scale motions in a wide space. We propose a novel non-rigid surface registration method to track and fuse the depth of the three flying cameras for surface motion tracking of the moving target, and simultaneously calculate the pose of each flying camera. We leverage the using of visual-odometry information provided by the UAV platform, and formulate the surface tracking problem in a non-linear objective function that can be linearized and effectively minimized through a Gaussian-Newton method. Quantitative and qualitative experimental results demonstrate the plausible surface and motion reconstruction results.

Capture of terrestrial-sized moons by gas giant planets.

PubMed

Williams, Darren M

2013-04-01

Terrestrial moons with masses >0.1 M (symbol in text) possibly exist around extrasolar giant planets, and here we consider the energetics of how they might form. Binary-exchange capture can occur if a binary-terrestrial object (BTO) is tidally disrupted during a close encounter with a giant planet and one of the binary members is ejected while the other remains as a moon. Tidal disruption occurs readily in the deep gravity wells of giant planets; however, the large encounter velocities in the wells make binary exchange more difficult than for planets of lesser mass. In addition, successful capture favors massive binaries with large rotational velocities and small component mass ratios. Also, since the interaction tends to leave the captured moons on highly elliptical orbits, permanent capture is only possible around planets with sizable Hill spheres that are well separated from their host stars.

Incorporating Floating Surface Objects into a Fully Dispersive Surface Wave Model

DTIC Science & Technology

2016-04-19

surface objects Sigma -coordinate Navier-Stokes Finite volume Immersed boundary a b s t r a c t The shock-capturing, non-hydrostatic, three...ontaining object or fluid, respectively. A 3D object with geometry escribed in Cartesian coordinates ( x, y, z ) was first projected onto he NHWAVE...17) . Specifically, the mask values re assigned by ASK = 0 if object projection includes u , v point (i, j) and k = k b ∼ k t ASK = 1 otherwise

Parametric design and gridding through relational geometry

NASA Technical Reports Server (NTRS)

Letcher, John S., Jr.; Shook, D. Michael

1995-01-01

Relational Geometric Synthesis (RGS) is a new logical framework for building up precise definitions of complex geometric models from points, curves, surfaces and solids. RGS achieves unprecedented design flexibility by supporting a rich variety of useful curve and surface entities. During the design process, many qualitative and quantitative relationships between elementary objects may be captured and retained in a data structure equivalent to a directed graph, such that they can be utilized for automatically updating the complete model geometry following changes in the shape or location of an underlying object. Capture of relationships enables many new possibilities for parametric variations and optimization. Examples are given of panelization applications for submarines, sailing yachts, offshore structures, and propellers.

Feature-based memory-driven attentional capture: visual working memory content affects visual attention.

PubMed

Olivers, Christian N L; Meijer, Frank; Theeuwes, Jan

2006-10-01

In 7 experiments, the authors explored whether visual attention (the ability to select relevant visual information) and visual working memory (the ability to retain relevant visual information) share the same content representations. The presence of singleton distractors interfered more strongly with a visual search task when it was accompanied by an additional memory task. Singleton distractors interfered even more when they were identical or related to the object held in memory, but only when it was difficult to verbalize the memory content. Furthermore, this content-specific interaction occurred for features that were relevant to the memory task but not for irrelevant features of the same object or for once-remembered objects that could be forgotten. Finally, memory-related distractors attracted more eye movements but did not result in longer fixations. The results demonstrate memory-driven attentional capture on the basis of content-specific representations. Copyright 2006 APA.

Scene incongruity and attention.

PubMed

Mack, Arien; Clarke, Jason; Erol, Muge; Bert, John

2017-02-01

Does scene incongruity, (a mismatch between scene gist and a semantically incongruent object), capture attention and lead to conscious perception? We explored this question using 4 different procedures: Inattention (Experiment 1), Scene description (Experiment 2), Change detection (Experiment 3), and Iconic Memory (Experiment 4). We found no differences between scene incongruity and scene congruity in Experiments 1, 2, and 4, although in Experiment 3 change detection was faster for scenes containing an incongruent object. We offer an explanation for why the change detection results differ from the results of the other three experiments. In all four experiments, participants invariably failed to report the incongruity and routinely mis-described it by normalizing the incongruent object. None of the results supports the claim that semantic incongruity within a scene invariably captures attention and provide strong evidence of the dominant role of scene gist in determining what is perceived. Copyright © 2016 Elsevier Inc. All rights reserved.

Threat captures attention but does not affect learning of contextual regularities.

PubMed

Yamaguchi, Motonori; Harwood, Sarah L

2017-04-01

Some of the stimulus features that guide visual attention are abstract properties of objects such as potential threat to one's survival, whereas others are complex configurations such as visual contexts that are learned through past experiences. The present study investigated the two functions that guide visual attention, threat detection and learning of contextual regularities, in visual search. Search arrays contained images of threat and non-threat objects, and their locations were fixed on some trials but random on other trials. Although they were irrelevant to the visual search task, threat objects facilitated attention capture and impaired attention disengagement. Search time improved for fixed configurations more than for random configurations, reflecting learning of visual contexts. Nevertheless, threat detection had little influence on learning of the contextual regularities. The results suggest that factors guiding visual attention are different from factors that influence learning to guide visual attention.

Earth's gravity gradient and eddy currents effects on the rotational dynamics of space debris objects: Envisat case study

NASA Astrophysics Data System (ADS)

Gómez, Natalia Ortiz; Walker, Scott J. I.

2015-08-01

The space debris population has grown rapidly over the last few decades with the consequent growth of impact risk between current objects in orbit. Active Debris Removal (ADR) has been recommended to be put into practice by several National Agencies in order to remove objects that pose the biggest risk for the space community. The most immediate target that is being considered for ADR by the European Space Agency is the Earth-observing satellite Envisat. In order to safely remove such a massive object from its orbit, a capturing process followed by a controlled reentry is necessary. However, current ADR methods that require physical contact with the target have limitations on the maximum angular momentum that can be absorbed and a de-tumbling phase prior to the capturing process may be required. Therefore, it is of utmost importance for the ADR mission design to be able to predict accurately how the target will be rotating at the time of capture. This article analyses two perturbations that affect an object in Low Earth Orbit (LEO), the Earth's gravity gradient and the eddy currents induced by the Earth's magnetic field. The gravity gradient is analysed using the equation of conservation of total energy and a graphical method is presented to understand the expected behaviour of any object under the effect of this perturbation. The eddy currents are also analysed by studying the total energy of the system. The induced torque and the characteristic time of decay are presented as a function of the object's magnetic tensor. In addition, simulations were carried out for the Envisat spacecraft including the gravity gradient perturbation as well as the eddy currents effect using the International Geomagnetic Reference Field IGRF-11 to model the Earth's magnetic field. These simulations show that the combined effect of these two perturbations is a plausible explanation for the rotational speed decay observed between April 2013 and September 2013.

Attention capture by abrupt onsets: re-visiting the priority tag model.

PubMed

Sunny, Meera M; von Mühlenen, Adrian

2013-01-01

Abrupt onsets have been shown to strongly attract attention in a stimulus-driven, bottom-up manner. However, the precise mechanism that drives capture by onsets is still debated. According to the new object account, abrupt onsets capture attention because they signal the appearance of a new object. Yantis and Johnson (1990) used a visual search task and showed that up to four onsets can be automatically prioritized. However, in their study the number of onsets co-varied with the total number of items in the display, allowing for a possible confound between these two variables. In the present study, display size was fixed at eight items while the number of onsets was systematically varied between zero and eight. Experiment 1 showed a systematic increase in reactions times with increasing number of onsets. This increase was stronger when the target was an onset than when it was a no-onset item, a result that is best explained by a model according to which only one onset is automatically prioritized. Even when the onsets were marked in red (Experiment 2), nearly half of the participants continued to prioritize only one onset item. Only when onset and no-onset targets were blocked (Experiment 3), participants started to search selectively through the set of only the relevant target type. These results further support the finding that only one onset captures attention. Many bottom-up models of attention capture, like masking or saliency accounts, can efficiently explain this finding.

Identification of pre-impact conditions of a cyclist involved in a vehicle-bicycle accident using an optimized MADYMO reconstruction combined with motion capture.

PubMed

Sun, Jie; Li, Zhengdong; Pan, Shaoyou; Feng, Hao; Shao, Yu; Liu, Ningguo; Huang, Ping; Zou, Donghua; Chen, Yijiu

2018-05-01

The aim of the present study was to develop an improved method, using MADYMO multi-body simulation software combined with an optimization method and three-dimensional (3D) motion capture, for identifying the pre-impact conditions of a cyclist (walking or cycling) involved in a vehicle-bicycle accident. First, a 3D motion capture system was used to analyze coupled motions of a volunteer while walking and cycling. The motion capture results were used to define the posture of the human model during walking and cycling simulations. Then, cyclist, bicycle and vehicle models were developed. Pre-impact parameters of the models were treated as unknown design variables. Finally, a multi-objective genetic algorithm, the nondominated sorting genetic algorithm II, was used to find optimal solutions. The objective functions of the walk parameter were significantly lower than cycle parameter; thus, the cyclist was more likely to have been walking with the bicycle than riding the bicycle. In the most closely matched result found, all observed contact points matched and the injury parameters correlated well with the real injuries sustained by the cyclist. Based on the real accident reconstruction, the present study indicates that MADYMO multi-body simulation software, combined with an optimization method and 3D motion capture, can be used to identify the pre-impact conditions of a cyclist involved in a vehicle-bicycle accident. Copyright © 2018. Published by Elsevier Ltd.

GNC architecture for autonomous robotic capture of a non-cooperative target: Preliminary concept design

NASA Astrophysics Data System (ADS)

Jankovic, Marko; Paul, Jan; Kirchner, Frank

2016-04-01

Recent studies of the space debris population in low Earth orbit (LEO) have concluded that certain regions have already reached a critical density of objects. This will eventually lead to a cascading process called the Kessler syndrome. The time may have come to seriously consider active debris removal (ADR) missions as the only viable way of preserving the space environment for future generations. Among all objects in the current environment, the SL-8 (Kosmos 3M second stages) rocket bodies (R/Bs) are some of the most suitable targets for future robotic ADR missions. However, to date, an autonomous relative navigation to and capture of an non-cooperative target has never been performed. Therefore, there is a need for more advanced, autonomous and modular systems that can cope with uncontrolled, tumbling objects. The guidance, navigation and control (GNC) system is one of the most critical ones. The main objective of this paper is to present a preliminary concept of a modular GNC architecture that should enable a safe and fuel-efficient capture of a known but uncooperative target, such as Kosmos 3M R/B. In particular, the concept was developed having in mind the most critical part of an ADR mission, i.e. close range proximity operations, and state of the art algorithms in the field of autonomous rendezvous and docking. In the end, a brief description of the hardware in the loop (HIL) testing facility is made, foreseen for the practical evaluation of the developed architecture.

Investigation of sparsity metrics for autofocusing in digital holographic microscopy

NASA Astrophysics Data System (ADS)

Fan, Xin; Healy, John J.; Hennelly, Bryan M.

2017-05-01

Digital holographic microscopy (DHM) is an optoelectronic technique that is made up of two parts: (i) the recording of the interference pattern of the diffraction pattern of an object and a known reference wavefield using a digital camera and (ii) the numerical reconstruction of the complex object wavefield using the recorded interferogram and a distance parameter as input. The latter is based on the simulation of optical propagation from the camera plane to a plane at any arbitrary distance from the camera. A key advantage of DHM over conventional microscopy is that both the phase and intensity information of the object can be recovered at any distance, using only one capture, and this facilitates the recording of scenes that may change dynamically and that may otherwise go in and out of focus. Autofocusing using traditional microscopy requires mechanical movement of the translation stage or the microscope objective, and multiple image captures that are then compared using some metric. Autofocusing in DHM is similar, except that the sequence of intensity images, to which the metric is applied, is generated numerically from a single capture. We recently investigated the application of a number of sparsity metrics for DHM autofocusing and in this paper we extend this work to include more such metrics, and apply them over a greater range of biological diatom cells and magnification/numerical apertures. We demonstrate for the first time that these metrics may be grouped together according to matching behavior following high pass filtering.

Pressurized fluidized-bed hydroretorting of Eastern oil shales -- Sulfur control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, M.J.; Abbasian, J.; Akin, C.

1992-05-01

This topical report on Sulfur Control'' presents the results of work conducted by the Institute of Gas Technology (IGT), the Illinois Institute of Technology (IIT), and the Ohio State University (OSU) to develop three novel approaches for desulfurization that have shown good potential with coal and could be cost-effective for oil shales. These are (1) In-Bed Sulfur Capture using different sorbents (IGT), (2) Electrostatic Desulfurization (IIT), and (3) Microbial Desulfurization and Denitrification (OSU and IGT). The objective of the task on In-Bed Sulfur Capture was to determine the effectiveness of different sorbents (that is, limestone, calcined limestone, dolomite, and siderite)more » for capturing sulfur (as H{sub 2}S) in the reactor during hydroretorting. The objective of the task on Electrostatic Desulfurization was to determine the operating conditions necessary to achieve a high degree of sulfur removal and kerogen recovery in IIT's electrostatic separator. The objectives of the task on Microbial Desulfurization and Denitrification were to (1) isolate microbial cultures and evaluate their ability to desulfurize and denitrify shale, (2) conduct laboratory-scale batch and continuous tests to improve and enhance microbial removal of these components, and (3) determine the effects of processing parameters, such as shale slurry concentration, solids settling characteristics, agitation rate, and pH on the process.« less

Mobile Computing Solutions for Effective and Efficient Generation and Dissemination of Tactical Operations Orders

DTIC Science & Technology

2017-06-01

and Joint doctrine, to establish a new paradigm for capturing, storing and transmitting the informational elements of an operations order. We...developed a working technology demonstrator that incorporates a new object-oriented data structure into existing open-source mobile technology to provide...instructor and practitioner in conjunction with Marine Corps and Joint doctrine, to establish a new paradigm for capturing, storing and transmitting the

Modelling individual difference in visual categorization.

PubMed

Shen, Jianhong; Palmeri, Thomas J

Recent years has seen growing interest in understanding, characterizing, and explaining individual differences in visual cognition. We focus here on individual differences in visual categorization. Categorization is the fundamental visual ability to group different objects together as the same kind of thing. Research on visual categorization and category learning has been significantly informed by computational modeling, so our review will focus both on how formal models of visual categorization have captured individual differences and how individual difference have informed the development of formal models. We first examine the potential sources of individual differences in leading models of visual categorization, providing a brief review of a range of different models. We then describe several examples of how computational models have captured individual differences in visual categorization. This review also provides a bit of an historical perspective, starting with models that predicted no individual differences, to those that captured group differences, to those that predict true individual differences, and to more recent hierarchical approaches that can simultaneously capture both group and individual differences in visual categorization. Via this selective review, we see how considerations of individual differences can lead to important theoretical insights into how people visually categorize objects in the world around them. We also consider new directions for work examining individual differences in visual categorization.

Modelling individual difference in visual categorization

PubMed Central

Shen, Jianhong; Palmeri, Thomas J.

2016-01-01

Recent years has seen growing interest in understanding, characterizing, and explaining individual differences in visual cognition. We focus here on individual differences in visual categorization. Categorization is the fundamental visual ability to group different objects together as the same kind of thing. Research on visual categorization and category learning has been significantly informed by computational modeling, so our review will focus both on how formal models of visual categorization have captured individual differences and how individual difference have informed the development of formal models. We first examine the potential sources of individual differences in leading models of visual categorization, providing a brief review of a range of different models. We then describe several examples of how computational models have captured individual differences in visual categorization. This review also provides a bit of an historical perspective, starting with models that predicted no individual differences, to those that captured group differences, to those that predict true individual differences, and to more recent hierarchical approaches that can simultaneously capture both group and individual differences in visual categorization. Via this selective review, we see how considerations of individual differences can lead to important theoretical insights into how people visually categorize objects in the world around them. We also consider new directions for work examining individual differences in visual categorization. PMID:28154496

Focusing and depth of field in photography: application in dermatology practice.

PubMed

Taheri, Arash; Yentzer, Brad A; Feldman, Steven R

2013-11-01

Conventional photography obtains a sharp image of objects within a given 'depth of field'; objects not within the depth of field are out of focus. In recent years, digital photography revolutionized the way pictures are taken, edited, and stored. However, digital photography does not result in a deeper depth of field or better focusing. In this article, we briefly review the concept of depth of field and focus in photography as well as new technologies in this area. A deep depth of field is used to have more objects in focus; a shallow depth of field can emphasize a subject by blurring the foreground and background objects. The depth of field can be manipulated by adjusting the aperture size of the camera, with smaller apertures increasing the depth of field at the cost of lower levels of light capture. Light-field cameras are a new generation of digital cameras that offer several new features, including the ability to change the focus on any object in the image after taking the photograph. Understanding depth of field and camera technology helps dermatologists to capture their subjects in focus more efficiently. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Dark texture in artworks

NASA Astrophysics Data System (ADS)

Parraman, Carinna

2012-01-01

This presentation highlights issues relating to the digital capture printing of 2D and 3D artefacts and accurate colour reproduction of 3D objects. There are a range of opportunities and technologies for the scanning and printing of two-dimensional and threedimensional artefacts [1]. A successful approach of Polynomial Texture Mapping (PTM) technique, to create a Reflectance Transformation Image (RTI) [2-4] is being used for the conservation and heritage of artworks as these methods are non invasive or non destructive of fragile artefacts. This approach captures surface detail of twodimensional artworks using a multidimensional approach that by using a hemispherical dome comprising 64 lamps to create an entire surface topography. The benefits of this approach are to provide a highly detailed visualization of the surface of materials and objects.

Creating 3D models of historical buildings using geospatial data

NASA Astrophysics Data System (ADS)

Alionescu, Adrian; Bǎlǎ, Alina Corina; Brebu, Floarea Maria; Moscovici, Anca-Maria

2017-07-01

Recently, a lot of interest has been shown to understand a real world object by acquiring its 3D images of using laser scanning technology and panoramic images. A realistic impression of geometric 3D data can be generated by draping real colour textures simultaneously captured by a colour camera images. In this context, a new concept of geospatial data acquisition has rapidly revolutionized the method of determining the spatial position of objects, which is based on panoramic images. This article describes an approach that comprises inusing terrestrial laser scanning and panoramic images captured with Trimble V10 Imaging Rover technology to enlarge the details and realism of the geospatial data set, in order to obtain 3D urban plans and virtual reality applications.

Restoration of motion blurred images

NASA Astrophysics Data System (ADS)

Gaxiola, Leopoldo N.; Juarez-Salazar, Rigoberto; Diaz-Ramirez, Victor H.

2017-08-01

Image restoration is a classic problem in image processing. Image degradations can occur due to several reasons, for instance, imperfections of imaging systems, quantization errors, atmospheric turbulence, relative motion between camera or objects, among others. Motion blur is a typical degradation in dynamic imaging systems. In this work, we present a method to estimate the parameters of linear motion blur degradation from a captured blurred image. The proposed method is based on analyzing the frequency spectrum of a captured image in order to firstly estimate the degradation parameters, and then, to restore the image with a linear filter. The performance of the proposed method is evaluated by processing synthetic and real-life images. The obtained results are characterized in terms of accuracy of image restoration given by an objective criterion.

A knowledge-based system design/information tool

NASA Technical Reports Server (NTRS)

Allen, James G.; Sikora, Scott E.

1990-01-01

The objective of this effort was to develop a Knowledge Capture System (KCS) for the Integrated Test Facility (ITF) at the Dryden Flight Research Facility (DFRF). The DFRF is a NASA Ames Research Center (ARC) facility. This system was used to capture the design and implementation information for NASA's high angle-of-attack research vehicle (HARV), a modified F/A-18A. In particular, the KCS was used to capture specific characteristics of the design of the HARV fly-by-wire (FBW) flight control system (FCS). The KCS utilizes artificial intelligence (AI) knowledge-based system (KBS) technology. The KCS enables the user to capture the following characteristics of automated systems: the system design; the hardware (H/W) design and implementation; the software (S/W) design and implementation; and the utilities (electrical and hydraulic) design and implementation. A generic version of the KCS was developed which can be used to capture the design information for any automated system. The deliverable items for this project consist of the prototype generic KCS and an application, which captures selected design characteristics of the HARV FCS.

Full-color large-scaled computer-generated holograms for physical and non-physical objects

NASA Astrophysics Data System (ADS)

Matsushima, Kyoji; Tsuchiyama, Yasuhiro; Sonobe, Noriaki; Masuji, Shoya; Yamaguchi, Masahiro; Sakamoto, Yuji

2017-05-01

Several full-color high-definition CGHs are created for reconstructing 3D scenes including real-existing physical objects. The field of the physical objects are generated or captured by employing three techniques; 3D scanner, synthetic aperture digital holography, and multi-viewpoint images. Full-color reconstruction of high-definition CGHs is realized by RGB color filters. The optical reconstructions are presented for verifying these techniques.

Data-driven grasp synthesis using shape matching and task-based pruning.

PubMed

Li, Ying; Fu, Jiaxin L; Pollard, Nancy S

2007-01-01

Human grasps, especially whole-hand grasps, are difficult to animate because of the high number of degrees of freedom of the hand and the need for the hand to conform naturally to the object surface. Captured human motion data provides us with a rich source of examples of natural grasps. However, for each new object, we are faced with the problem of selecting the best grasp from the database and adapting it to that object. This paper presents a data-driven approach to grasp synthesis. We begin with a database of captured human grasps. To identify candidate grasps for a new object, we introduce a novel shape matching algorithm that matches hand shape to object shape by identifying collections of features having similar relative placements and surface normals. This step returns many grasp candidates, which are clustered and pruned by choosing the grasp best suited for the intended task. For pruning undesirable grasps, we develop an anatomically-based grasp quality measure specific to the human hand. Examples of grasp synthesis are shown for a variety of objects not present in the original database. This algorithm should be useful both as an animator tool for posing the hand and for automatic grasp synthesis in virtual environments.

Apparatus for releasably connecting first and second objects in predetermined space relationship

NASA Technical Reports Server (NTRS)

Chandler, J. A. (Inventor)

1984-01-01

A releasable apparatus that connects first and second space objects, such as a spacecraft and a space vehicle, in predetermined spaced relationship is described. The apparatus comprises at least one probe member mounted on the first object, having an elongated shank portion, the distal end of which is provided with a tapered nose portion. At least one drogue assembly is mounted on the second space object for releasably capturing the probe member upon the first and second objects being brought into close proximity with each other.

3D workflow for HDR image capture of projection systems and objects for CAVE virtual environments authoring with wireless touch-sensitive devices

NASA Astrophysics Data System (ADS)

Prusten, Mark J.; McIntyre, Michelle; Landis, Marvin

2006-02-01

A 3D workflow pipeline is presented for High Dynamic Range (HDR) image capture of projected scenes or objects for presentation in CAVE virtual environments. The methods of HDR digital photography of environments vs. objects are reviewed. Samples of both types of virtual authoring being the actual CAVE environment and a sculpture are shown. A series of software tools are incorporated into a pipeline called CAVEPIPE, allowing for high-resolution objects and scenes to be composited together in natural illumination environments [1] and presented in our CAVE virtual reality environment. We also present a way to enhance the user interface for CAVE environments. The traditional methods of controlling the navigation through virtual environments include: glove, HUD's and 3D mouse devices. By integrating a wireless network that includes both WiFi (IEEE 802.11b/g) and Bluetooth (IEEE 802.15.1) protocols the non-graphical input control device can be eliminated. Therefore wireless devices can be added that would include: PDA's, Smart Phones, TabletPC's, Portable Gaming consoles, and PocketPC's.

[The role of sustained attention in shift-contingent change blindness].

PubMed

Nakashima, Ryoichi; Yokosawa, Kazuhiko

2015-02-01

Previous studies of change blindness have examined the effect of temporal factors (e.g., blank duration) on attention in change detection. This study examined the effect of spatial factors (i.e., whether the locations of original and changed objects are the same or different) on attention in change detection, using a shift-contingent change blindness task. We used a flicker paradigm in which the location of a to-be-judged target image was manipulated (shift, no-shift). In shift conditions, the image of an array of objects was spatially shifted so that all objects appeared in new locations; in no-shift conditions, all object images of an array appeared at the same location. The presence of visual stimuli (dots) in the blank display between the two images was.manipulated (dot, no-dot) under the assumption that abrupt onsets of these stimuli would capture attention. Results indicated that change detection performance was improved by exogenous attentional capture in the shift condition. Thus, we suggest that attention can play an important role in change detection during shift-contingent change blindness.

A Functional Framework for Database Management Systems.

DTIC Science & Technology

1980-02-01

Furctionat Approach 13 7.2. Objects in a 080S 14 ".2.1. ExternaL Objects 15 ;.2.2. Conceptual Objects 15 -. 2.3. Internal Objects 15 7.2.4. Externat...standpoint of their ’-efinitional and conceptual goals. 2. To make it posibLe to define arc specify the neeos as the ’irst phase cf the design process...methods. This ain is analogcus to the one in which programming language techrotogy has beer captured and supported through the conceptual lan;4age

DeepSkeleton: Learning Multi-Task Scale-Associated Deep Side Outputs for Object Skeleton Extraction in Natural Images

NASA Astrophysics Data System (ADS)

Shen, Wei; Zhao, Kai; Jiang, Yuan; Wang, Yan; Bai, Xiang; Yuille, Alan

2017-11-01

Object skeletons are useful for object representation and object detection. They are complementary to the object contour, and provide extra information, such as how object scale (thickness) varies among object parts. But object skeleton extraction from natural images is very challenging, because it requires the extractor to be able to capture both local and non-local image context in order to determine the scale of each skeleton pixel. In this paper, we present a novel fully convolutional network with multiple scale-associated side outputs to address this problem. By observing the relationship between the receptive field sizes of the different layers in the network and the skeleton scales they can capture, we introduce two scale-associated side outputs to each stage of the network. The network is trained by multi-task learning, where one task is skeleton localization to classify whether a pixel is a skeleton pixel or not, and the other is skeleton scale prediction to regress the scale of each skeleton pixel. Supervision is imposed at different stages by guiding the scale-associated side outputs toward the groundtruth skeletons at the appropriate scales. The responses of the multiple scale-associated side outputs are then fused in a scale-specific way to detect skeleton pixels using multiple scales effectively. Our method achieves promising results on two skeleton extraction datasets, and significantly outperforms other competitors. Additionally, the usefulness of the obtained skeletons and scales (thickness) are verified on two object detection applications: Foreground object segmentation and object proposal detection.

Analysis and Consequences of the Iridium 33-Cosmos 2251 Collision

NASA Technical Reports Server (NTRS)

Anz-Meador, P. D.; Liou, Jer-Chi

2010-01-01

The collision of Iridium 33 and Cosmos 2251, on 10 February 2009, was the first known unintentional hypervelocity collision in space of intact satellites. Iridium 33 was an active commercial telecommunications satellite, while Cosmos 2251 was a derelict communication satellite of the Strela-2M class. The collision occurred at a relative velocity of 11.6 km/s at an altitude of approximately 790 km over the Great Siberian Plain and near the northern apex of Cosmos 2251 s orbit. This paper describes the physical and orbital characteristics of the relevant spacecraft classes and reports upon our analysis of the resulting debris clouds size, mass, area-to-mass ratio, and relative velocity/directionality distributions. We compare these distributions to those predicted by the NASA breakup model and notable recent fragmentation events; in particular, we compare the area-to-mass ratio distribution for each spacecraft to that exhibited by the FY-1C debris cloud for the purpose of assessing the relative contribution of modern aerospace materials to debris clouds resulting from energetic collisions. In addition, we examine the long-term consequences of this event for the low Earth orbit (LEO) environment. Finally, we discuss "lessons learned", which may be incorporated into NASA s environmental models.

Degradation of mecoprop in polluted landfill leachate and waste water in a moving bed biofilm reactor.

PubMed

Escolà Casas, Mònica; Nielsen, Tue Kjærgaard; Kot, Witold; Hansen, Lars Hestbjerg; Johansen, Anders; Bester, Kai

2017-09-15

Mecoprop is a common pollutant in effluent-, storm- and groundwater as well as in leachates from derelict dumpsites. Thus, bioremediation approaches may be considered. We conducted batch experiments with moving bed biofilm (MBBR)-carriers to understand the degradation of mecoprop. As a model, the carriers were incubated in effluent from a conventional wastewater treatment plant which was spiked to 10, 50 and 100 μg L -1 mecoprop. Co-metabolic processes as well as mineralization were studied. Initial mecoprop concentration and mecoprop degradation impacted the microbial communities. The removal of (S)-mecoprop prevailed over the (R)-mecoprop. This was associated with microbial compositions, in which several operational taxonomic units (OTUs) co-varied positively with (S)-mecoprop removal. The removal-rate constant of (S)-mecoprop was 0.5 d -1 in the 10 μg L -1 set-up but it decreased in the 50 and 100 μg L -1 set-ups. The addition of methanol prolonged the removal of (R)-mecoprop. During mecoprop degradation, 4-chloro-2-methylphenol was formed and degraded. A new metabolite (4-chloro-2-methylphenol sulfate) was identified and quantified. Copyright © 2017 Elsevier Ltd. All rights reserved.

Spectroscopic analysis of soil metal contamination around a derelict mine site in the Blue Mountains, Australia

NASA Astrophysics Data System (ADS)

Shamsoddini, A.; Raval, S.; Taplin, R.

2014-09-01

Abandoned mine sites pose the potential threat of the heavy metal pollution spread through streams and via runoff leading to contamination of soil and water in their surrounding areas. Regular monitoring of these areas is critical to minimise impacts on water resources, flora and fauna. Conventional ground based monitoring is expensive and sometimes impractical; spectroscopic methods have been emerged as a reliable alternative for this purpose. In this study, the capabilities of the spectroscopy method were examined for modelling soil contamination from around the abandoned silver-zinc mine located at Yerranderie, NSW Australia. The diagnostic characteristics of the original reflectance data were compared with models derived from first and second derivatives of the reflectance data. The results indicate that the models derived from the first derivative of the reflectance data estimate heavy metals significantly more accurately than model derived from the original reflectance. It was also found in this study that there is no need to use second derivative for modelling heavy metal soil contamination. Finally, the results indicate that estimates were of greater accuracy for arsenic and lead compared to other heavy metals, while the estimation for silver was found to be the most erroneous.

JView Visualization for Next Generation Air Transportation System

DTIC Science & Technology

2011-01-01

hardware graphics acceleration. JView relies on concrete Object Oriented Design (OOD) and programming techniques to provide a robust and venue non...visibility priority of a texture set. A good example of this is you have translucent images that should always be visible over the other textures...elements present in the scene. • Capture Alpha. Allows the alpha color channel ( translucency ) to be saved when capturing images or movies of a 3D scene

Laser-based structural sensing and surface damage detection

NASA Astrophysics Data System (ADS)

Guldur, Burcu

Damage due to age or accumulated damage from hazards on existing structures poses a worldwide problem. In order to evaluate the current status of aging, deteriorating and damaged structures, it is vital to accurately assess the present conditions. It is possible to capture the in situ condition of structures by using laser scanners that create dense three-dimensional point clouds. This research investigates the use of high resolution three-dimensional terrestrial laser scanners with image capturing abilities as tools to capture geometric range data of complex scenes for structural engineering applications. Laser scanning technology is continuously improving, with commonly available scanners now capturing over 1,000,000 texture-mapped points per second with an accuracy of ~2 mm. However, automatically extracting meaningful information from point clouds remains a challenge, and the current state-of-the-art requires significant user interaction. The first objective of this research is to use widely accepted point cloud processing steps such as registration, feature extraction, segmentation, surface fitting and object detection to divide laser scanner data into meaningful object clusters and then apply several damage detection methods to these clusters. This required establishing a process for extracting important information from raw laser-scanned data sets such as the location, orientation and size of objects in a scanned region, and location of damaged regions on a structure. For this purpose, first a methodology for processing range data to identify objects in a scene is presented and then, once the objects from model library are correctly detected and fitted into the captured point cloud, these fitted objects are compared with the as-is point cloud of the investigated object to locate defects on the structure. The algorithms are demonstrated on synthetic scenes and validated on range data collected from test specimens and test-bed bridges. The second objective of this research is to combine useful information extracted from laser scanner data with color information, which provides information in the fourth dimension that enables detection of damage types such as cracks, corrosion, and related surface defects that are generally difficult to detect using only laser scanner data; moreover, the color information also helps to track volumetric changes on structures such as spalling. Although using images with varying resolution to detect cracks is an extensively researched topic, damage detection using laser scanners with and without color images is a new research area that holds many opportunities for enhancing the current practice of visual inspections. The aim is to combine the best features of laser scans and images to create an automatic and effective surface damage detection method, which will reduce the need for skilled labor during visual inspections and allow automatic documentation of related information. This work enables developing surface damage detection strategies that integrate existing condition rating criteria for a wide range damage types that are collected under three main categories: small deformations already existing on the structure (cracks); damage types that induce larger deformations, but where the initial topology of the structure has not changed appreciably (e.g., bent members); and large deformations where localized changes in the topology of the structure have occurred (e.g., rupture, discontinuities and spalling). The effectiveness of the developed damage detection algorithms are validated by comparing the detection results with the measurements taken from test specimens and test-bed bridges.

Flexible Electrostatic Technologies for Capture and Handling, Phase 1

NASA Technical Reports Server (NTRS)

Bryan, Thomas

2015-01-01

Fundamental to many of NASA's in-space transportation missions is the capture and handling of various objects and vehicles in various orbits for servicing, debris disposal, sample retrieval, and assembly without the benefit of sufficient grapple fixtures and docking ports. To perform similar material handling tasks on Earth, pincher grippers, suction grippers, or magnetic chucks are used, but are unable to reliably grip aluminum and composite spacecraft, insulation, radiators, solar arrays, or extra-terrestrial objects in the vacuum of outer space without dedicated handles in the right places. The electronic Flexible Electrostatic Technologies for space Capture and Handling (FETCH) will enable reliable and compliant gripping (soft dock) of practically any object in various orbits or surfaces without dedicated mechanical features, very low impact capture, and built-in proximity sensing without any conventional actuators. Originally developed to handle semiconductor and glass wafers during vacuum chamber processing without contamination, the normal rigid wafer handling chucks are replaced with thin metal foil segments laminated in flexible insulation driven by commercial off-the-shelf solid state, high-voltage power supplies. Preliminary testing in NASA Marshall Space Flight Center's (MSFC's) Flat Floor Robotics Lab demonstrated compliant alignment and gripping with a full-sized, 150-lb microsat mockup and translation before a clean release with a flip of a switch. The flexible electrostatic gripper pads can be adapted to various space applications with different sizes, shapes, and foil electrode layouts even with openings through the gripper pads for addition of guidance sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 lb/in2 or 70-300 lb/ft2 of surface contact, the FETCH can turn on and off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, precision relocation, and surface translation for accurate anchoring.

Creating photorealistic virtual model with polarization-based vision system

NASA Astrophysics Data System (ADS)

Shibata, Takushi; Takahashi, Toru; Miyazaki, Daisuke; Sato, Yoichi; Ikeuchi, Katsushi

2005-08-01

Recently, 3D models are used in many fields such as education, medical services, entertainment, art, digital archive, etc., because of the progress of computational time and demand for creating photorealistic virtual model is increasing for higher reality. In computer vision field, a number of techniques have been developed for creating the virtual model by observing the real object in computer vision field. In this paper, we propose the method for creating photorealistic virtual model by using laser range sensor and polarization based image capture system. We capture the range and color images of the object which is rotated on the rotary table. By using the reconstructed object shape and sequence of color images of the object, parameter of a reflection model are estimated in a robust manner. As a result, then, we can make photorealistic 3D model in consideration of surface reflection. The key point of the proposed method is that, first, the diffuse and specular reflection components are separated from the color image sequence, and then, reflectance parameters of each reflection component are estimated separately. In separation of reflection components, we use polarization filter. This approach enables estimation of reflectance properties of real objects whose surfaces show specularity as well as diffusely reflected lights. The recovered object shape and reflectance properties are then used for synthesizing object images with realistic shading effects under arbitrary illumination conditions.

Vision-based overlay of a virtual object into real scene for designing room interior

NASA Astrophysics Data System (ADS)

Harasaki, Shunsuke; Saito, Hideo

2001-10-01

In this paper, we introduce a geometric registration method for augmented reality (AR) and an application system, interior simulator, in which a virtual (CG) object can be overlaid into a real world space. Interior simulator is developed as an example of an AR application of the proposed method. Using interior simulator, users can visually simulate the location of virtual furniture and articles in the living room so that they can easily design the living room interior without placing real furniture and articles, by viewing from many different locations and orientations in real-time. In our system, two base images of a real world space are captured from two different views for defining a projective coordinate of object 3D space. Then each projective view of a virtual object in the base images are registered interactively. After such coordinate determination, an image sequence of a real world space is captured by hand-held camera with tracking non-metric measured feature points for overlaying a virtual object. Virtual objects can be overlaid onto the image sequence by taking each relationship between the images. With the proposed system, 3D position tracking device, such as magnetic trackers, are not required for the overlay of virtual objects. Experimental results demonstrate that 3D virtual furniture can be overlaid into an image sequence of the scene of a living room nearly at video rate (20 frames per second).

Temperature dependence of carrier capture by defects in gallium arsenide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wampler, William R.; Modine, Normand A.

2015-08-01

This report examines the temperature dependence of the capture rate of carriers by defects in gallium arsenide and compares two previously published theoretical treatments of this based on multi phonon emission (MPE). The objective is to reduce uncertainty in atomistic simulations of gain degradation in III-V HBTs from neutron irradiation. A major source of uncertainty in those simulations is poor knowledge of carrier capture rates, whose values can differ by several orders of magnitude between various defect types. Most of this variation is due to different dependence on temperature, which is closely related to the relaxation of the defect structuremore » that occurs as a result of the change in charge state of the defect. The uncertainty in capture rate can therefore be greatly reduced by better knowledge of the defect relaxation.« less

Living Labs: overview of ecological approaches for health promotion and rehabilitation.

PubMed

Korman, M; Weiss, P L; Kizony, R

2016-01-01

The term "Living Lab" was coined to reflect the use of sensors to monitor human behavior in real life environments. Until recently such measurements had been feasible only within experimental laboratory settings. The objective of this paper is to highlight research on health care sensing and monitoring devices that enable direct, objective and accurate capture of real-world functioning. Selected articles exemplifying the key technologies that allow monitoring of the motor-cognitive activity of persons with disabilities during naturally occurring daily experiences in real-life settings are discussed in terms of (1) the ways in which the Living Lab approach has been used to date, (2) limitations related to clinical assessment in rehabilitation settings and (3) three categories of the instruments most commonly used for this purpose: personal technologies, ambient technologies and external assistive systems. Technology's most important influences on clinical practice and rehabilitation are in a shift from laboratory-based to field-centered research and a transition between in-clinic performance to daily life activities. Numerous applications show its potential for real-time clinical assessment. Current technological solutions that may provide clinicians with objective, unobtrusive measurements of health and function, as well as tools that support rehabilitation on an individual basis in natural environments provide an important asset to standard clinical measures. Until recently objective clinical assessment could not be readily performed in a client's daily functional environment. Novel technologies enable health care sensing and monitoring devices that enable direct, objective and accurate capture of real-world functioning. Such technologies are referred to as a "Living Lab" approach since they enable the capture of objective and non-obtrusive data that clinicians can use to assess performance. Research and development in this field help clinicians support maintain independence and quality of life for people who have disabilities or who are aging, and to promote more effective methods of long-term rehabilitation and maintenance of a healthy life style.

Attentional capture in visual search: Capture and post-capture dynamics revealed by EEG.

PubMed

Liesefeld, Heinrich René; Liesefeld, Anna Marie; Töllner, Thomas; Müller, Hermann J

2017-08-01

Sometimes, salient-but-irrelevant objects (distractors) presented concurrently with a search target cannot be ignored and attention is involuntarily allocated towards the distractor first. Several studies have provided electrophysiological evidence for involuntary misallocations of attention towards a distractor, but much less is known about the mechanisms that are needed to overcome a misallocation and re-allocate attention towards the concurrently presented target. In our study, electrophysiological markers of attentional mechanisms indicate that (i) the distractor captures attention before the target is attended, (ii) a misallocation of attention is terminated actively (instead of attention fading passively), and (iii) the misallocation of attention towards a distractor delays the attention allocation towards the target (rather than just delaying some post-attentive process involved in response selection). This provides the most complete demonstration, to date, of the chain of attentional mechanisms that are evoked when attention is misguided and recovers from capture within a search display. Copyright © 2017 Elsevier Inc. All rights reserved.

Transforming Functional Requirements from UML into BPEL to Efficiently Develop SOA-Based Systems

NASA Astrophysics Data System (ADS)

Vemulapalli, Anisha; Subramanian, Nary

The intended behavior of any system such as services, tasks or functions can be captured by functional requirements of the system. As our dependence on online services has grown steadily, the web applications are being developed employing the SOA. BPEL4WS provides a means for expressing functional requirements of an SOA-based system by providing constructs to capture business goals and objectives for the system. In this paper we propose an approach for transforming user-centered requirements captured using UML into a corresponding BPEL specification, where the business processes are captured by means of use-cases from which UML sequence diagrams and activity diagrams are extracted. Subsequently these UML models are mapped to BPEL specifications that capture the essence of the initial business requirements to develop the SOA-based system by employing CASE tools. A student housing system is used as a case study to illustrate this approach and the system is validated using NetBeans.

Impact detections of temporarily captured natural satellites

NASA Astrophysics Data System (ADS)

Clark, David; Spurný, Pavel; Wiegert, Paul; Brown, Peter G.; Borovicha, Jiri; Tagliaferri, Ed; Shrbeny, Lukas

2016-10-01

Temporarily Captured Orbiters (TCOs) are Near-Earth Objects (NEOs) which make a few orbits of Earth before returning to heliocentric orbits. Only one TCO has been observed to date, 2006 RH120, captured by Earth for one year before escaping. Detailed modeling predicts capture should occur from the NEO population predominantly through the Sun-Earth L1 and L2 points, with 1% of TCOs impacting Earth and approximately 0.1% of meteoroids being TCOs. Although thousands of meteoroid orbits have been measured, none until now have conclusively exhibited TCO behaviour, largely due to difficulties in measuring initial meteoroid speed with sufficient precision. We report on a precise meteor observation of January 13, 2014 by a new generation of all-sky fireball digital camera systems operated in the Czech Republic as part of the European Fireball Network, providing the lowest natural object entry speed observed in decades long monitoring by networks world-wide. Modeling atmospheric deceleration and fragmentation yields an initial mass of ~5 kg and diameter of 15 cm, with a maximum Earth-relative velocity just over 11.0 km/s. Spectral observations prove its natural origin. Back-integration across observational uncertainties yields a 92 - 98% probability of TCO behaviour, with close lunar dynamical interaction. The capture duration varies across observational uncertainties from 48 days to 5+ years. We also report on two low-speed impacts recorded by US Government sensors, and we examine Prairie Network event PN39078 from 1965 having an extremely low entry speed of 10.9 km/s. In these cases uncertainties in measurement and origin make TCO designation uncertain.

Rendezvous missions to temporarily captured near Earth asteroids

NASA Astrophysics Data System (ADS)

Brelsford, S.; Chyba, M.; Haberkorn, T.; Patterson, G.

2016-04-01

Missions to rendezvous with or capture an asteroid present significant interest both from a geophysical and safety point of view. They are key to the understanding of our solar system and are stepping stones for interplanetary human flight. In this paper, we focus on a rendezvous mission with 2006 RH120, an asteroid classified as a Temporarily Captured Orbiter (TCO). TCOs form a new population of near Earth objects presenting many advantages toward that goal. Prior to the mission, we consider the spacecraft hibernating on a Halo orbit around the Earth-Moon's L2 libration point. The objective is to design a transfer for the spacecraft from the parking orbit to rendezvous with 2006 RH120 while minimizing the fuel consumption. Our transfers use indirect methods, based on the Pontryagin Maximum Principle, combined with continuation techniques and a direct method to address the sensitivity of the initialization. We demonstrate that a rendezvous mission with 2006 RH120 can be accomplished with low delta-v. This exploratory work can be seen as a first step to identify good candidates for a rendezvous on a given TCO trajectory.

Capture of near-Earth objects with low-thrust propulsion and invariant manifolds

NASA Astrophysics Data System (ADS)

Tang, Gao; Jiang, Fanghua

2016-01-01

In this paper, a mission incorporating low-thrust propulsion and invariant manifolds to capture near-Earth objects (NEOs) is investigated. The initial condition has the spacecraft rendezvousing with the NEO. The mission terminates once it is inserted into a libration point orbit (LPO). The spacecraft takes advantage of stable invariant manifolds for low-energy ballistic capture. Low-thrust propulsion is employed to retrieve the joint spacecraft-asteroid system. Global optimization methods are proposed for the preliminary design. Local direct and indirect methods are applied to optimize the two-impulse transfers. Indirect methods are implemented to optimize the low-thrust trajectory and estimate the largest retrievable mass. To overcome the difficulty that arises from bang-bang control, a homotopic approach is applied to find an approximate solution. By detecting the switching moments of the bang-bang control the efficiency and accuracy of numerical integration are guaranteed. By using the homotopic approach as the initial guess the shooting function is easy to solve. The relationship between the maximum thrust and the retrieval mass is investigated. We find that both numerically and theoretically a larger thrust is preferred.

Oculomotor guidance and capture by irrelevant faces.

PubMed

Devue, Christel; Belopolsky, Artem V; Theeuwes, Jan

2012-01-01

Even though it is generally agreed that face stimuli constitute a special class of stimuli, which are treated preferentially by our visual system, it remains unclear whether faces can capture attention in a stimulus-driven manner. Moreover, there is a long-standing debate regarding the mechanism underlying the preferential bias of selecting faces. Some claim that faces constitute a set of special low-level features to which our visual system is tuned; others claim that the visual system is capable of extracting the meaning of faces very rapidly, driving attentional selection. Those debates continue because many studies contain methodological peculiarities and manipulations that prevent a definitive conclusion. Here, we present a new visual search task in which observers had to make a saccade to a uniquely colored circle while completely irrelevant objects were also present in the visual field. The results indicate that faces capture and guide the eyes more than other animated objects and that our visual system is not only tuned to the low-level features that make up a face but also to its meaning.

Featured Image: Fireball After a Temporary Capture?

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2016-06-01

This image of a fireball was captured in the Czech Republic by cameras at a digital autonomous observatory in the village of Kunak. This observatory is part of a network of stations known as the European Fireball Network, and this particular meteoroid detection, labeled EN130114, is notable because it has the lowest initial velocity of any natural object ever observed by the network. Led by David Clark (University of Western Ontario), the authors of a recent study speculate that before this meteoroid impacted Earth, it may have been a Temporarily Captured Orbiter (TCO). TCOs are near-Earth objects that make a few orbits of Earth before returning to heliocentric orbits. Only one has ever been observed to date, and though they are thought to make up 0.1% of all meteoroids, EN130114 is the first event ever detected that exhibits conclusive behavior of a TCO. For more information on EN130114 and why TCOs are important to study, check out the paper below!CitationDavid L. Clark et al 2016 AJ 151 135. doi:10.3847/0004-6256/151/6/135

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alptekin, Gokhan

The overall objective of the proposed research is to develop a low cost, high capacity CO{sub 2} sorbent and demonstrate its technical and economic viability for pre-combustion CO{sub 2} capture. The specific objectives supporting our research plan were to optimize the chemical structure and physical properties of the sorbent, scale-up its production using high throughput manufacturing equipment and bulk raw materials and then evaluate its performance, first in bench-scale experiments and then in slipstream tests using actual coal-derived synthesis gas. One of the objectives of the laboratory-scale evaluations was to demonstrate the life and durability of the sorbent for overmore » 10,000 cycles and to assess the impact of contaminants (such as sulfur) on its performance. In the field tests, our objective was to demonstrate the operation of the sorbent using actual coal-derived synthesis gas streams generated by air-blown and oxygen-blown commercial and pilot-scale coal gasifiers (the CO{sub 2} partial pressure in these gas streams is significantly different, which directly impacts the operating conditions hence the performance of the sorbent). To support the field demonstration work, TDA collaborated with Phillips 66 and Southern Company to carry out two separate field tests using actual coal-derived synthesis gas at the Wabash River IGCC Power Plant in Terre Haute, IN and the National Carbon Capture Center (NCCC) in Wilsonville, AL. In collaboration with the University of California, Irvine (UCI), a detailed engineering and economic analysis for the new CO{sub 2} capture system was also proposed to be carried out using Aspen PlusTM simulation software, and estimate its effect on the plant efficiency.« less

NEUTRON-CAPTURE ELEMENT ABUNDANCES IN MAGELLANIC CLOUD PLANETARY NEBULAE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mashburn, A. L.; Sterling, N. C.; Madonna, S.

We present near-infrared spectra of 10 planetary nebulae (PNe) in the Large and Small Magellanic Clouds (LMC and SMC), acquired with the FIRE and GNIRS spectrometers on the 6.5 m Baade and 8.1 m Gemini South Telescopes, respectively. We detect Se and/or Kr emission lines in eight of these objects, the first detections of n -capture elements in Magellanic Cloud PNe. Our abundance analysis shows large s -process enrichments of Kr (0.6–1.3 dex) in the six PNe in which it was detected, and Se is enriched by 0.5–0.9 dex in five objects. We also estimate upper limits to Rb andmore » Cd abundances in these objects. Our abundance results for the LMC are consistent with the hypothesis that PNe with 2–3 M {sub ⊙} progenitors dominate the bright end of the PN luminosity function in young gas-rich galaxies. We find no significant correlations between s -process enrichments and other elemental abundances, central star temperature, or progenitor mass, though this is likely due to our small sample size. We determine S abundances from our spectra and find that [S/H] agrees with [Ar/H] to within 0.2 dex for most objects, but is lower than [O/H] by 0.2–0.4 dex in some PNe, possibly due to O enrichment via third dredge-up. Our results demonstrate that n -capture elements can be detected in PNe belonging to nearby galaxies with ground-based telescopes, allowing s -process enrichments to be studied in PN populations with well-determined distances.« less

Acquisition and Neural Network Prediction of 3D Deformable Object Shape Using a Kinect and a Force-Torque Sensor.

PubMed

Tawbe, Bilal; Cretu, Ana-Maria

2017-05-11

The realistic representation of deformations is still an active area of research, especially for deformable objects whose behavior cannot be simply described in terms of elasticity parameters. This paper proposes a data-driven neural-network-based approach for capturing implicitly and predicting the deformations of an object subject to external forces. Visual data, in the form of 3D point clouds gathered by a Kinect sensor, is collected over an object while forces are exerted by means of the probing tip of a force-torque sensor. A novel approach based on neural gas fitting is proposed to describe the particularities of a deformation over the selectively simplified 3D surface of the object, without requiring knowledge of the object material. An alignment procedure, a distance-based clustering, and inspiration from stratified sampling support this process. The resulting representation is denser in the region of the deformation (an average of 96.6% perceptual similarity with the collected data in the deformed area), while still preserving the object's overall shape (86% similarity over the entire surface) and only using on average of 40% of the number of vertices in the mesh. A series of feedforward neural networks is then trained to predict the mapping between the force parameters characterizing the interaction with the object and the change in the object shape, as captured by the fitted neural gas nodes. This series of networks allows for the prediction of the deformation of an object when subject to unknown interactions.

Revisiting the Procedures for the Vector Data Quality Assurance in Practice

NASA Astrophysics Data System (ADS)

Erdoğan, M.; Torun, A.; Boyacı, D.

2012-07-01

Immense use of topographical data in spatial data visualization, business GIS (Geographic Information Systems) solutions and applications, mobile and location-based services forced the topo-data providers to create standard, up-to-date and complete data sets in a sustainable frame. Data quality has been studied and researched for more than two decades. There have been un-countable numbers of references on its semantics, its conceptual logical and representations and many applications on spatial databases and GIS. However, there is a gap between research and practice in the sense of spatial data quality which increases the costs and decreases the efficiency of data production. Spatial data quality is well-known by academia and industry but usually in different context. The research on spatial data quality stated several issues having practical use such as descriptive information, metadata, fulfillment of spatial relationships among data, integrity measures, geometric constraints etc. The industry and data producers realize them in three stages; pre-, co- and post data capturing. The pre-data capturing stage covers semantic modelling, data definition, cataloguing, modelling, data dictionary and schema creation processes. The co-data capturing stage covers general rules of spatial relationships, data and model specific rules such as topologic and model building relationships, geometric threshold, data extraction guidelines, object-object, object-belonging class, object-non-belonging class, class-class relationships to be taken into account during data capturing. And post-data capturing stage covers specified QC (quality check) benchmarks and checking compliance to general and specific rules. The vector data quality criteria are different from the views of producers and users. But these criteria are generally driven by the needs, expectations and feedbacks of the users. This paper presents a practical method which closes the gap between theory and practice. Development of spatial data quality concepts into developments and application requires existence of conceptual, logical and most importantly physical existence of data model, rules and knowledge of realization in a form of geo-spatial data. The applicable metrics and thresholds are determined on this concrete base. This study discusses application of geo-spatial data quality issues and QA (quality assurance) and QC procedures in the topographic data production. Firstly we introduce MGCP (Multinational Geospatial Co-production Program) data profile of NATO (North Atlantic Treaty Organization) DFDD (DGIWG Feature Data Dictionary), the requirements of data owner, the view of data producers for both data capturing and QC and finally QA to fulfil user needs. Then, our practical and new approach which divides the quality into three phases is introduced. Finally, implementation of our approach to accomplish metrics, measures and thresholds of quality definitions is discussed. In this paper, especially geometry and semantics quality and quality control procedures that can be performed by the producers are discussed. Some applicable best-practices that we experienced on techniques of quality control, defining regulations that define the objectives and data production procedures are given in the final remarks. These quality control procedures should include the visual checks over the source data, captured vector data and printouts, some automatic checks that can be performed by software and some semi-automatic checks by the interaction with quality control personnel. Finally, these quality control procedures should ensure the geometric, semantic, attribution and metadata quality of vector data.

Impact of Domain Analysis on Reuse Methods

DTIC Science & Technology

1989-11-06

return on the investment. The potential negative effects a "bad" domain analysis has on developing systems in the domain also increases the risks of a...importance of domain analysis as part of a software reuse program. A particular goal is to assist in avoiding the potential negative effects of ad hoc or...are specification objects discovered by performing object-oriented analysis. Object-based analysis approaches thus serve to capture a model of reality

Destruction of Peptides and Nucleosides in Reactions with Low-Energy Electrons

NASA Astrophysics Data System (ADS)

Muftakhov, M. V.; Shchukin, P. V.

2018-05-01

Mass-spectrometry of negative ions is used to study dissociative electron capture by molecules of several nucleosides, simplest di- and tripeptides, and modified dipeptides. Energy domains and efficiencies of dissociative capture are determined for the objects under study, and threshold energies of several fragmentation processes are estimated. It is shown that cytidine and peptides are stable against fragmentation due to simple bond breaking at electron energies ranging from 0 to 1 eV.

A Mandala: A Diagram of the Clinical Education Experience in Athletic Training

ERIC Educational Resources Information Center

Cernohous, Steve; West, Sharon

2007-01-01

Objective: The objective of this paper is to present the practical use of a Mandala that: 1) provides opportunities for athletic training students to explore, reflect on and appreciate their clinical experiences; 2) provides educators with a model to understand and value athletic training student experiences; 3) organizes and captures factors and…

Multispectral image analysis for object recognition and classification

NASA Astrophysics Data System (ADS)

Viau, C. R.; Payeur, P.; Cretu, A.-M.

2016-05-01

Computer and machine vision applications are used in numerous fields to analyze static and dynamic imagery in order to assist or automate decision-making processes. Advancements in sensor technologies now make it possible to capture and visualize imagery at various wavelengths (or bands) of the electromagnetic spectrum. Multispectral imaging has countless applications in various fields including (but not limited to) security, defense, space, medical, manufacturing and archeology. The development of advanced algorithms to process and extract salient information from the imagery is a critical component of the overall system performance. The fundamental objective of this research project was to investigate the benefits of combining imagery from the visual and thermal bands of the electromagnetic spectrum to improve the recognition rates and accuracy of commonly found objects in an office setting. A multispectral dataset (visual and thermal) was captured and features from the visual and thermal images were extracted and used to train support vector machine (SVM) classifiers. The SVM's class prediction ability was evaluated separately on the visual, thermal and multispectral testing datasets.

PlenoPatch: Patch-Based Plenoptic Image Manipulation.

PubMed

Zhang, Fang-Lue; Wang, Jue; Shechtman, Eli; Zhou, Zi-Ye; Shi, Jia-Xin; Hu, Shi-Min

2017-05-01

Patch-based image synthesis methods have been successfully applied for various editing tasks on still images, videos and stereo pairs. In this work we extend patch-based synthesis to plenoptic images captured by consumer-level lenselet-based devices for interactive, efficient light field editing. In our method the light field is represented as a set of images captured from different viewpoints. We decompose the central view into different depth layers, and present it to the user for specifying the editing goals. Given an editing task, our method performs patch-based image synthesis on all affected layers of the central view, and then propagates the edits to all other views. Interaction is done through a conventional 2D image editing user interface that is familiar to novice users. Our method correctly handles object boundary occlusion with semi-transparency, thus can generate more realistic results than previous methods. We demonstrate compelling results on a wide range of applications such as hole-filling, object reshuffling and resizing, changing object depth, light field upscaling and parallax magnification.

Discomfort Evaluation of Truck Ingress/Egress Motions Based on Biomechanical Analysis

PubMed Central

Choi, Nam-Chul; Lee, Sang Hun

2015-01-01

This paper presents a quantitative discomfort evaluation method based on biomechanical analysis results for human body movement, as well as its application to an assessment of the discomfort for truck ingress and egress. In this study, the motions of a human subject entering and exiting truck cabins with different types, numbers, and heights of footsteps were first measured using an optical motion capture system and load sensors. Next, the maximum voluntary contraction (MVC) ratios of the muscles were calculated through a biomechanical analysis of the musculoskeletal human model for the captured motion. Finally, the objective discomfort was evaluated using the proposed discomfort model based on the MVC ratios. To validate this new discomfort assessment method, human subject experiments were performed to investigate the subjective discomfort levels through a questionnaire for comparison with the objective discomfort levels. The validation results showed that the correlation between the objective and subjective discomforts was significant and could be described by a linear regression model. PMID:26067194

Interactions between ecology, demography, capture stress, and profiles of corticosterone and glucose in a free-living population of Australian freshwater crocodiles.

PubMed

Jessop, Tim S; Tucker, Anton D; Limpus, Colin J; Whittier, Joan M

2003-06-01

In this study we examined three aspects pertaining to adrenocortical responsiveness in free-ranging Australian freshwater crocodiles (Crocodylus johnstoni). First, we examined the ability of freshwater crocodiles to produce corticosterone in response to a typical capture-stress protocol. A second objective addressed the relationship between capture stress, plasma glucose and corticosterone. Next we examined if variation in basal and capture-stress-induced levels of plasma corticosterone was linked to ecological or demographic factors for individuals in this free-ranging population. Blood samples obtained on three field trips were taken from a cross-sectional sample of the population. Crocodiles were bled once during four time categories at 0, 0.5, 6, and 10h post-capture. Plasma corticosterone increased significantly with time post-capture. Plasma glucose also significantly increased with duration of capture-stress and exhibited a positive and significant relationship with plasma corticosterone. Significant variation in basal or stress induced levels of corticosterone in crocodiles was not associated with any ecological or demographic factors including sex, age class or the year of capture that the crocodiles were sampled from. However, three immature males had basal levels of plasma corticosterone greater than 2 standard deviations above the mean. While crocodiles exhibited a pronounced adrenocortical and hyperglycaemic response to capture stress, limited variation in adrenocortical responsiveness due to ecological and demographic factors was not evident. This feature could arise in part because this population was sampled during a period of environmental benigness.

Penetration of multiple thin films in micrometeorite capture cells

NASA Technical Reports Server (NTRS)

Simon, Charles G.

1994-01-01

As part of a continuing effort to develop cosmic dust detectors/collectors for use in space, we performed a series of hypervelocity impact experiments on combined sensor/capture-cell assemblies using 10-200-micron-diameter glass projectiles and olivine crystals at velocities of 0.9-14.4 km/s. The design objective of the space-flight instrument is to measure the trajectories of individual particles with sufficient accuracy to permit identification of their parent bodies and to capture enough impactor material to allow chemical and isotopic analyses of samples returned to Earth. Three different multiple-film small-particle capture cell designs (0.1-100-micron-thick Al foils with approx. 10, 100, and 1800 micron spacing) were evaluated for their ability to capture impactor fragments and residue. Their performances were compared to two other types of capture cells, foil covered Ge crystals, and 0.50 and 0.120 g/cu cm aerogels. All capture cells were tested behind multifilm (1.4-6.0-micron-thick) polyvinylidene fluoride (PVDF) velocity/trajectory sensor devices. Several tests were also done without the PVDF sensors for comparison. The results of this study were reported by Simon in a comprehensive report in which the morphology of impacts and impactor residues in various types of capture cells after passage through two PVDF sensor films is discussed. Impactor fragments in selected capture cells from impacts at velocities up to 6.4 km/s were identified using scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS).

A Novel Approach to High Definition, High-Contrast Video Capture in Abdominal Surgery

PubMed Central

Cosman, Peter H.; Shearer, Christopher J.; Hugh, Thomas J.; Biankin, Andrew V.; Merrett, Neil D.

2007-01-01

Objective: The aim of this study was to define the best available option for video capture of surgical procedures for educational and archival purposes, with a view to identifying methods of capturing high-quality footage and identifying common pitfalls. Summary Background Data: Several options exist for those who wish to record operative surgical techniques on video. While high-end equipment is an unnecessary expense for most surgical units, several techniques are readily available that do not require industrial-grade audiovisual recording facilities, but not all are suited to every surgical application. Methods: We surveyed and evaluated the available technology for video capture in surgery. Our evaluation included analyses of video resolution, depth of field, contrast, exposure, image stability, and frame composition, as well as considerations of cost, accessibility, utility, feasibility, and economies of scale. Results: Several video capture options were identified, and the strengths and shortcomings of each were catalogued. None of the commercially available options was deemed suitable for high-quality video capture of abdominal surgical procedures. A novel application of off-the-shelf technology was devised to address these issues. Conclusions: Excellent quality video capture of surgical procedures within deep body cavities is feasible using commonly available equipment and technology, with minimal technical difficulty. PMID:17414600

General object recognition is specific: Evidence from novel and familiar objects.

PubMed

Richler, Jennifer J; Wilmer, Jeremy B; Gauthier, Isabel

2017-09-01

In tests of object recognition, individual differences typically correlate modestly but nontrivially across familiar categories (e.g. cars, faces, shoes, birds, mushrooms). In theory, these correlations could reflect either global, non-specific mechanisms, such as general intelligence (IQ), or more specific mechanisms. Here, we introduce two separate methods for effectively capturing category-general performance variation, one that uses novel objects and one that uses familiar objects. In each case, we show that category-general performance variance is unrelated to IQ, thereby implicating more specific mechanisms. The first approach examines three newly developed novel object memory tests (NOMTs). We predicted that NOMTs would exhibit more shared, category-general variance than familiar object memory tests (FOMTs) because novel objects, unlike familiar objects, lack category-specific environmental influences (e.g. exposure to car magazines or botany classes). This prediction held, and remarkably, virtually none of the substantial shared variance among NOMTs was explained by IQ. Also, while NOMTs correlated nontrivially with two FOMTs (faces, cars), these correlations were smaller than among NOMTs and no larger than between the face and car tests themselves, suggesting that the category-general variance captured by NOMTs is specific not only relative to IQ, but also, to some degree, relative to both face and car recognition. The second approach averaged performance across multiple FOMTs, which we predicted would increase category-general variance by averaging out category-specific factors. This prediction held, and as with NOMTs, virtually none of the shared variance among FOMTs was explained by IQ. Overall, these results support the existence of object recognition mechanisms that, though category-general, are specific relative to IQ and substantially separable from face and car recognition. They also add sensitive, well-normed NOMTs to the tools available to study object recognition. Copyright © 2017 Elsevier B.V. All rights reserved.

A Self-Assessment Stereo Capture Model Applicable to the Internet of Things

PubMed Central

Lin, Yancong; Yang, Jiachen; Lv, Zhihan; Wei, Wei; Song, Houbing

2015-01-01

The realization of the Internet of Things greatly depends on the information communication among physical terminal devices and informationalized platforms, such as smart sensors, embedded systems and intelligent networks. Playing an important role in information acquisition, sensors for stereo capture have gained extensive attention in various fields. In this paper, we concentrate on promoting such sensors in an intelligent system with self-assessment capability to deal with the distortion and impairment in long-distance shooting applications. The core design is the establishment of the objective evaluation criteria that can reliably predict shooting quality with different camera configurations. Two types of stereo capture systems—toed-in camera configuration and parallel camera configuration—are taken into consideration respectively. The experimental results show that the proposed evaluation criteria can effectively predict the visual perception of stereo capture quality for long-distance shooting. PMID:26308004

Attentional capture and engagement during the attentional blink: A "camera" metaphor of attention.

PubMed

Zivony, Alon; Lamy, Dominique

2016-11-01

Identification of a target is impaired when it follows a previous target within 500 ms, suggesting that our attentional system suffers from severe temporal limitations. Although control-disruption theories posit that such impairment, known as the attentional blink (AB), reflects a difficulty in matching incoming information with the current attentional set, disrupted-engagement theories propose that it reflects a delay in later processes leading to transient enhancement of potential targets. Here, we used a variant of the contingent-capture rapid serial visual presentation (RSVP) paradigm (Folk, Ester, & Troemel, 2009) to adjudicate these competing accounts. Our results show that a salient distractor that shares the target color captures attention to the same extent whether it appears within or outside the blink, thereby invalidating the notion that control over the attentional set is compromised during the blink. In addition, our results show that during the blink, not the attention-capturing object itself but the item immediately following it, is selected, indicating that the AB manifests as a delay between attentional capture and attentional engagement. We therefore conclude that attentional capture and attentional engagement can be dissociated as separate stages of attentional selection. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Subjective vs objective evaluations of smile esthetics.

PubMed

Schabel, Brian J; Franchi, Lorenzo; Baccetti, Tiziano; McNamara, James A

2009-04-01

The aim of this study was to analyze the relationships between subjective evaluations of posttreatment smiles captured with clinical photography and rated by a panel of orthodontists and parents of orthodontic patients, and objective evaluations of the same smiles from the Smile Mesh program (TDG Computing, Philadelphia, Pa). The clinical photographs of 48 orthodontically treated patients were rated by a panel of 25 experienced orthodontists and 20 parents of patients. Independent samples t tests were used to test whether objective measurements were significantly different between subjects with "attractive" and "unattractive" smiles, and those with the "most attractive" and "least attractive" smiles. Additionally, logistic regression was performed to evaluate whether the measurements could predict whether a smile captured with clinical photography would be attractive or unattractive. The comparison between groups showed no significant differences for any measurement. Subjects with the "most unattractive" smiles had a significantly greater distance between the incisal edge of the maxillary central incisors and the lower lip during smiling, and a significantly smaller smile index than did those with the "most attractive" smiles. As shown by the coefficients of logistic regression, smile attractiveness could not be predicted by any objectively gathered measurement. No objective measure of the smile could predict attractive or unattractive smiles as judged subjectively.

Grasping rigid objects in zero-g

NASA Astrophysics Data System (ADS)

Anderson, Greg D.

1993-12-01

The extra vehicular activity helper/retriever (EVAHR) is a prototype for an autonomous free- flying robotic astronaut helper. The ability to grasp a moving object is a fundamental skill required for any autonomous free-flyer. This paper discusses an algorithm that couples resolved acceleration control with potential field based obstacle avoidance to enable a manipulator to track and capture a rigid object in (imperfect) zero-g while avoiding joint limits, singular configurations, and unintentional impacts between the manipulator and the environment.

An Underwater Target Detection System for Electro-Optical Imagery Data

DTIC Science & Technology

2010-06-01

detection and segmentation of underwater mine-like objects in the EO images captured with a CCD-based image sensor. The main focus of this research is to...develop a robust detection algorithm that can be used to detect low contrast and partial underwater objects from the EO imagery with low false alarm rate...underwater target detection I. INTRODUCTION Automatic detection and recognition of underwater objects from EO imagery poses a serious challenge due to poor

Trajectory determinations and collection of micrometeoroids on the space station. Report of the Workshop on Micrometeorite Capture Experiments

NASA Technical Reports Server (NTRS)

Hoerz, F. (Editor)

1986-01-01

Summaries of papers presented at the Workshop on Micrometeorite Capture Experiments are compiled. The goals of the workshop were to define the scientific objectives and the resulting performance requirements of a potential Space Station facility and to identify the major elements of a coherent development program that would generate the desired capabilities within the next decade. Specific topics include cosmic dust and space debris collection techniques, particle trajectory and source determination, and specimen analysis methods.

Spiderweb deformation induced by electrostatically charged insects

PubMed Central

Ortega-Jimenez, Victor Manuel; Dudley, Robert

2013-01-01

Capture success of spider webs has been associated with their microstructure, ornamentation, and wind-induced vibrations. Indirect evidence suggests that statically charged objects can attract silk thread, but web deformations induced by charged insects have not yet been described. Here, we show under laboratory conditions that electrostatically charged honeybees, green bottle flies, fruit flies, aphids, and also water drops falling near webs of cross-spiders (Araneus diadematus) induce rapid thread deformation that enhances the likelihood of physical contact, and thus of prey capture. PMID:23828093

Earth's Minimoons: Opportunities for Science and Technology.

NASA Astrophysics Data System (ADS)

Jedicke, Robert; Bolin, Bryce T.; Bottke, William F.; Chyba, Monique; Fedorets, Grigori; Granvik, Mikael; Jones, Lynne; Urrutxua, Hodei

2018-05-01

Twelve years ago the Catalina Sky Survey discovered Earth's first known natural geocentric object other than the Moon, a few-meter diameter asteroid designated \\RH. Despite significant improvements in ground-based asteroid surveying technology in the past decade they have not discovered another temporarily-captured orbiter (TCO; colloquially known as minimoons) but the all-sky fireball system operated in the Czech Republic as part of the European Fireball Network detected a bright natural meteor that was almost certainly in a geocentric orbit before it struck Earth's atmosphere. Within a few years the Large Synoptic Survey Telescope (LSST) will either begin to regularly detect TCOs or force a re-analysis of the creation and dynamical evolution of small asteroids in the inner solar system. The first studies of the provenance, properties, and dynamics of Earth's minimoons suggested that there should be a steady state population with about one 1- to 2-meter diameter captured objects at any time, with the number of captured meteoroids increasing exponentially for smaller sizes. That model was then improved and extended to include the population of temporarily-captured flybys (TCFs), objects that fail to make an entire revolution around Earth while energetically bound to the Earth-Moon system. Several different techniques for discovering TCOs have been considered but their small diameters, proximity, and rapid motion make them challenging targets for existing ground-based optical, meteor, and radar surveys. However, the LSST's tremendous light gathering power and short exposure times could allow it to detect and discover many minimoons. We expect that if the TCO population is confirmed, and new objects are frequently discovered, they can provide new opportunities for 1) studying the dynamics of the Earth-Moon system, 2) testing models of the production and dynamical evolution of small asteroids from the asteroid belt, 3) rapid and frequent low delta-v missions to multiple minimoons, and 4) evaluating in-situ resource utilization techniques on asteroidal material. Here we review the past decade of minimoon studies in preparation for capitalizing on the scientific and commercial opportunities of TCOs in the first decade of LSST operations.

Designing for Feel: Contrasts between Human and Automated Parametric Capture of Knob Physics.

PubMed

Swindells, C; MacLean, K E; Booth, K S

2009-01-01

We examine a crucial aspect of a tool intended to support designing for feel: the ability of an objective physical-model identification method to capture perceptually relevant parameters, relative to human identification performance. The feel of manual controls, such as knobs, sliders, and buttons, becomes critical when these controls are used in certain settings. Appropriate feel enables designers to create consistent control behaviors that lead to improved usability and safety. For example, a heavy knob with stiff detents for a power plant boiler setting may afford better feedback and safer operations, whereas subtle detents in an automobile radio volume knob may afford improved ergonomics and driver attention to the road. To assess the quality of our identification method, we compared previously reported automated model captures for five real mechanical reference knobs with captures by novice and expert human participants who were asked to adjust four parameters of a rendered knob model to match the feel of each reference knob. Participants indicated their satisfaction with the matches their renderings produced. We observed similar relative inertia, friction, detent strength, and detent spacing parameterizations by human experts and our automatic estimation methods. Qualitative results provided insight on users' strategies and confidence. While experts (but not novices) were better able to ascertain an underlying model in the presence of unmodeled dynamics, the objective algorithm outperformed all humans when an appropriate physical model was used. Our studies demonstrate that automated model identification can capture knob dynamics as perceived by a human, and they also establish limits to that ability; they comprise a step towards pragmatic design guidelines for embedded physical interfaces in which methodological expedience is informed by human perceptual requirements.

Faces Do Not Capture Special Attention in Children with Autism Spectrum Disorder: A Change Blindness Study

ERIC Educational Resources Information Center

Kikuchi, Yukiko; Senju, Atsushi; Tojo, Yoshikuni; Osanai, Hiroo; Hasegawa, Toshikazu

2009-01-01

Two experiments investigated attention of children with autism spectrum disorder (ASD) to faces and objects. In both experiments, children (7- to 15-year-olds) detected the difference between 2 visual scenes. Results in Experiment 1 revealed that typically developing children (n = 16) detected the change in faces faster than in objects, whereas…

Attentional Capture of Objects Referred to by Spoken Language

ERIC Educational Resources Information Center

Salverda, Anne Pier; Altmann, Gerry T. M.

2011-01-01

Participants saw a small number of objects in a visual display and performed a visual detection or visual-discrimination task in the context of task-irrelevant spoken distractors. In each experiment, a visual cue was presented 400 ms after the onset of a spoken word. In experiments 1 and 2, the cue was an isoluminant color change and participants…

High-fidelity, low-cost, automated method to assess laparoscopic skills objectively.

PubMed

Gray, Richard J; Kahol, Kanav; Islam, Gazi; Smith, Marshall; Chapital, Alyssa; Ferrara, John

2012-01-01

We sought to define the extent to which a motion analysis-based assessment system constructed with simple equipment could measure technical skill objectively and quantitatively. An "off-the-shelf" digital video system was used to capture the hand and instrument movement of surgical trainees (beginner level = PGY-1, intermediate level = PGY-3, and advanced level = PGY-5/fellows) while they performed a peg transfer exercise. The video data were passed through a custom computer vision algorithm that analyzed incoming pixels to measure movement smoothness objectively. The beginner-level group had the poorest performance, whereas those in the advanced group generated the highest scores. Intermediate-level trainees scored significantly (p < 0.04) better than beginner trainees. Advanced-level trainees scored significantly better than intermediate-level trainees and beginner-level trainees (p < 0.04 and p < 0.03, respectively). A computer vision-based analysis of surgical movements provides an objective basis for technical expertise-level analysis with construct validity. The technology to capture the data is simple, low cost, and readily available, and it obviates the need for expert human assessment in this setting. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Active confocal imaging for visual prostheses

PubMed Central

Jung, Jae-Hyun; Aloni, Doron; Yitzhaky, Yitzhak; Peli, Eli

2014-01-01

There are encouraging advances in prosthetic vision for the blind, including retinal and cortical implants, and other “sensory substitution devices” that use tactile or electrical stimulation. However, they all have low resolution, limited visual field, and can display only few gray levels (limited dynamic range), severely restricting their utility. To overcome these limitations, image processing or the imaging system could emphasize objects of interest and suppress the background clutter. We propose an active confocal imaging system based on light-field technology that will enable a blind user of any visual prosthesis to efficiently scan, focus on, and “see” only an object of interest while suppressing interference from background clutter. The system captures three-dimensional scene information using a light-field sensor and displays only an in-focused plane with objects in it. After capturing a confocal image, a de-cluttering process removes the clutter based on blur difference. In preliminary experiments we verified the positive impact of confocal-based background clutter removal on recognition of objects in low resolution and limited dynamic range simulated phosphene images. Using a custom-made multiple-camera system, we confirmed that the concept of a confocal de-cluttered image can be realized effectively using light field imaging. PMID:25448710

Three-dimensional reconstruction from serial sections in PC-Windows platform by using 3D_Viewer.

PubMed

Xu, Yi-Hua; Lahvis, Garet; Edwards, Harlene; Pitot, Henry C

2004-11-01

Three-dimensional (3D) reconstruction from serial sections allows identification of objects of interest in 3D and clarifies the relationship among these objects. 3D_Viewer, developed in our laboratory for this purpose, has four major functions: image alignment, movie frame production, movie viewing, and shift-overlay image generation. Color images captured from serial sections were aligned; then the contours of objects of interest were highlighted in a semi-automatic manner. These 2D images were then automatically stacked at different viewing angles, and their composite images on a projected plane were recorded by an image transform-shift-overlay technique. These composition images are used in the object-rotation movie show. The design considerations of the program and the procedures used for 3D reconstruction from serial sections are described. This program, with a digital image-capture system, a semi-automatic contours highlight method, and an automatic image transform-shift-overlay technique, greatly speeds up the reconstruction process. Since images generated by 3D_Viewer are in a general graphic format, data sharing with others is easy. 3D_Viewer is written in MS Visual Basic 6, obtainable from our laboratory on request.

The structure of the distant Kuiper belt in a Nice model scenario

NASA Astrophysics Data System (ADS)

Pike, Rosemary E.; Lawler, Samantha; Brasser, Ramon; Shankman, Cory; Alexandersen, Mike; Kavelaars, J. J.

2016-10-01

By utilizing a well-sampled migration model and characterized survey detections, we demonstrate that the Nice-model scenario results in consistent populations of scattering trans-Neptunian objects (TNOs) and several resonant TNO populations, but fails to reproduce the large population of 5:1 resonators discovered in surveys. We examine in detail the TNO populations implanted by the Nice model simulation from Brasser and Morbidelli (2013, B&M). This analysis focuses on the region from 25-155 AU, probing the classical, scattering, detached, and major resonant populations. Additional integrations were necessary to classify the test particles and determine population sizes and characteristics. The classified simulation objects are compared to the real TNOs from the Canada-France Ecliptic Plane Survey (CFEPS), CFEPS high latitude fields, and the Alexandersen (2016) survey. These surveys all include a detailed characterization of survey depth, pointing, and tracking efficiency, which allows detailed testing of this independently produced model of TNO populations. In the B&M model, the regions of the outer Solar System populated via capture of scattering objects are consistent with survey constraints. The scattering TNOs and most n:1 resonant populations have consistent orbital distributions and population sizes with the real detections, as well as a starting disk mass consistent with expectations. The B&M 5:1 resonators have a consistent orbital distribution with the real detections and previous models. However, the B&M 5:1 Neptune resonance is underpopulated by a factor of ~100 and would require a starting proto-planetesimal disk with a mass of ~100 Earth masses. The large population in the 5:1 Neptune resonance is unexplained by scattering capture in a Nice-model scenario, however this model accurately produces the TNO subpopulations that result from scattering object capture and provides additional insight into sub-population orbital distributions.

Real-time computer treatment of THz passive device images with the high image quality

NASA Astrophysics Data System (ADS)

Trofimov, Vyacheslav A.; Trofimov, Vladislav V.

2012-06-01

We demonstrate real-time computer code improving significantly the quality of images captured by the passive THz imaging system. The code is not only designed for a THz passive device: it can be applied to any kind of such devices and active THz imaging systems as well. We applied our code for computer processing of images captured by four passive THz imaging devices manufactured by different companies. It should be stressed that computer processing of images produced by different companies requires using the different spatial filters usually. The performance of current version of the computer code is greater than one image per second for a THz image having more than 5000 pixels and 24 bit number representation. Processing of THz single image produces about 20 images simultaneously corresponding to various spatial filters. The computer code allows increasing the number of pixels for processed images without noticeable reduction of image quality. The performance of the computer code can be increased many times using parallel algorithms for processing the image. We develop original spatial filters which allow one to see objects with sizes less than 2 cm. The imagery is produced by passive THz imaging devices which captured the images of objects hidden under opaque clothes. For images with high noise we develop an approach which results in suppression of the noise after using the computer processing and we obtain the good quality image. With the aim of illustrating the efficiency of the developed approach we demonstrate the detection of the liquid explosive, ordinary explosive, knife, pistol, metal plate, CD, ceramics, chocolate and other objects hidden under opaque clothes. The results demonstrate the high efficiency of our approach for the detection of hidden objects and they are a very promising solution for the security problem.

How to Pluck a Spectrum from a Planet

NASA Image and Video Library

2007-02-21

This diagram illustrates how astronomers using NASA Spitzer Space Telescope can capture the elusive spectra of hot-Jupiter planets. Spectra are an object light spread apart into its basic components, or wavelengths.

The role of fear and expectancies in capture of covert attention by spiders.

PubMed

Devue, Christel; Belopolsky, Artem V; Theeuwes, Jan

2011-08-01

Fear-related stimuli are often prioritized during visual selection but it remains unclear whether capture by salient objects is more likely to occur when individuals fear those objects. In this study, participants with high and low fear of spiders searched for a circle while on some trials a completely irrelevant fear-related (spider) or neutral distractor (butterfly/leaf) was presented simultaneously in the display. Our results show that when you fear spiders and you are not sure whether a spider is going to be present, then any salient distractor (i.e., a butterfly) grabs your attention, suggesting that mere expectation of a spider triggered compulsory monitoring of all irrelevant stimuli. However, neutral stimuli did not grab attention when high spider fearful people knew that a spider could not be present during a block of trials, treating the neutral stimuli just as the low spider fearful people do. Our results show that people that fear spiders inspect potential spider-containing locations in a compulsory fashion even though directing attention to this location is completely irrelevant for the task. Reduction of capture can only be accomplished when people that fear spiders do not expect a spider to be present. 2011 APA, all rights reserved

Proposal to construct the operational base of the educative work process in collective health.

PubMed

Pereira, Erica Gomes; Soares, Cássia Baldini; Campos, Célia Maria Sivalli

2007-01-01

This study aimed to construct the operational base of the educative work in health from a Marxist perspective. Reports of nursing experiences in the basic health services, published between 1988-2003, served as empirical base. The object was captured from: the participants; the action agents; the objective; health and education conceptions; and the generating necessity. The means/instruments were identified through: physical space; didactic resources; frequency of meetings; and the conception of health education. The type of evaluation; to whom it was directed; the goal to be reached and articulation between the theoretical and operational knowledge were identified in order to capture the purpose. The educative work in collective health can strengthen social groups when it becomes praxis that assumes the participant as a dialogical co-producer of the work in health.

Three-dimensional fluorescent microscopy via simultaneous illumination and detection at multiple planes.

PubMed

Ma, Qian; Khademhosseinieh, Bahar; Huang, Eric; Qian, Haoliang; Bakowski, Malina A; Troemel, Emily R; Liu, Zhaowei

2016-08-16

The conventional optical microscope is an inherently two-dimensional (2D) imaging tool. The objective lens, eyepiece and image sensor are all designed to capture light emitted from a 2D 'object plane'. Existing technologies, such as confocal or light sheet fluorescence microscopy have to utilize mechanical scanning, a time-multiplexing process, to capture a 3D image. In this paper, we present a 3D optical microscopy method based upon simultaneously illuminating and detecting multiple focal planes. This is implemented by adding two diffractive optical elements to modify the illumination and detection optics. We demonstrate that the image quality of this technique is comparable to conventional light sheet fluorescent microscopy with the advantage of the simultaneous imaging of multiple axial planes and reduced number of scans required to image the whole sample volume.

RemoveDEBRIS: An in-orbit active debris removal demonstration mission

NASA Astrophysics Data System (ADS)

Forshaw, Jason L.; Aglietti, Guglielmo S.; Navarathinam, Nimal; Kadhem, Haval; Salmon, Thierry; Pisseloup, Aurélien; Joffre, Eric; Chabot, Thomas; Retat, Ingo; Axthelm, Robert; Barraclough, Simon; Ratcliffe, Andrew; Bernal, Cesar; Chaumette, François; Pollini, Alexandre; Steyn, Willem H.

2016-10-01

Since the beginning of the space era, a significant amount of debris has progressively been generated. Most of the objects launched into space are still orbiting the Earth and today these objects represent a threat as the presence of space debris incurs risk of collision and damage to operational satellites. A credible solution has emerged over the recent years: actively removing debris objects by capturing them and disposing of them. This paper provides an update to the mission baseline and concept of operations of the EC FP7 RemoveDEBRIS mission drawing on the expertise of some of Europe's most prominent space institutions in order to demonstrate key active debris remove (ADR) technologies in a low-cost ambitious manner. The mission will consist of a microsatellite platform (chaser) that ejects 2 CubeSats (targets). These targets will assist with a range of strategically important ADR technology demonstrations including net capture, harpoon capture and vision-based navigation using a standard camera and LiDAR. The chaser will also host a drag sail for orbital lifetime reduction. The mission baseline has been revised to take into account feedback from international and national space policy providers in terms of risk and compliance and a suitable launch option is selected. A launch in 2017 is targeted. The RemoveDEBRIS mission aims to be one of the world's first in-orbit demonstrations of key technologies for active debris removal and is a vital prerequisite to achieving the ultimate goal of a cleaner Earth orbital environment.

Visuospatial working memory mediates inhibitory and facilitatory guidance in preview search.

PubMed

Barrett, Doug J K; Shimozaki, Steven S; Jensen, Silke; Zobay, Oliver

2016-10-01

Visual search is faster and more accurate when a subset of distractors is presented before the display containing the target. This "preview benefit" has been attributed to separate inhibitory and facilitatory guidance mechanisms during search. In the preview task the temporal cues thought to elicit inhibition and facilitation provide complementary sources of information about the likely location of the target. In this study, we use a Bayesian observer model to compare sensitivity when the temporal cues eliciting inhibition and facilitation produce complementary, and competing, sources of information. Observers searched for T-shaped targets among L-shaped distractors in 2 standard and 2 preview conditions. In the standard conditions, all the objects in the display appeared at the same time. In the preview conditions, the initial subset of distractors either stayed on the screen or disappeared before the onset of the search display, which contained the target when present. In the latter, the synchronous onset of old and new objects negates the predictive utility of stimulus-driven capture during search. The results indicate observers combine memory-driven inhibition and sensory-driven capture to reduce spatial uncertainty about the target's likely location during search. In the absence of spatially predictive onsets, memory-driven inhibition at old locations persists despite irrelevant sensory change at previewed locations. This result is consistent with a bias toward unattended objects during search via the active suppression of irrelevant capture at previously attended locations. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Visibility through the gaseous smoke in airborne remote sensing using a DSLR camera

NASA Astrophysics Data System (ADS)

Chabok, Mirahmad; Millington, Andrew; Hacker, Jorg M.; McGrath, Andrew J.

2016-08-01

Visibility and clarity of remotely sensed images acquired by consumer grade DSLR cameras, mounted on an unmanned aerial vehicle or a manned aircraft, are critical factors in obtaining accurate and detailed information from any area of interest. The presence of substantial haze, fog or gaseous smoke particles; caused, for example, by an active bushfire at the time of data capture, will dramatically reduce image visibility and quality. Although most modern hyperspectral imaging sensors are capable of capturing a large number of narrow range bands of the shortwave and thermal infrared spectral range, which have the potential to penetrate smoke and haze, the resulting images do not contain sufficient spatial detail to enable locating important objects or assist search and rescue or similar applications which require high resolution information. We introduce a new method for penetrating gaseous smoke without compromising spatial resolution using a single modified DSLR camera in conjunction with image processing techniques which effectively improves the visibility of objects in the captured images. This is achieved by modifying a DSLR camera and adding a custom optical filter to enable it to capture wavelengths from 480-1200nm (R, G and Near Infrared) instead of the standard RGB bands (400-700nm). With this modified camera mounted on an aircraft, images were acquired over an area polluted by gaseous smoke from an active bushfire. Processed data using our proposed method shows significant visibility improvements compared with other existing solutions.

Comparison of electrofishing techniques to detect larval lampreys in wadeable streams in the Pacific Northwest

USGS Publications Warehouse

Dunham, Jason B.; Chelgren, Nathan D.; Heck, Michael P.; Clark, Steven M.

2013-01-01

We evaluated the probability of detecting larval lampreys using different methods of backpack electrofishing in wadeable streams in the U.S. Pacific Northwest. Our primary objective was to compare capture of lampreys using electrofishing with standard settings for salmon and trout to settings specifically adapted for capture of lampreys. Field work consisted of removal sampling by means of backpack electrofishing in 19 sites in streams representing a broad range of conditions in the region. Captures of lampreys at these sites were analyzed with a modified removal-sampling model and Bayesian estimation to measure the relative odds of capture using the lamprey-specific settings compared with the standard salmonid settings. We found that the odds of capture were 2.66 (95% credible interval, 0.87–78.18) times greater for the lamprey-specific settings relative to standard salmonid settings. When estimates of capture probability were applied to estimating the probabilities of detection, we found high (>0.80) detectability when the actual number of lampreys in a site was greater than 10 individuals and effort was at least two passes of electrofishing, regardless of the settings used. Further work is needed to evaluate key assumptions in our approach, including the evaluation of individual-specific capture probabilities and population closure. For now our results suggest comparable results are possible for detection of lampreys by using backpack electrofishing with salmonid- or lamprey-specific settings.

Quasiperiodic Oscillations in X-ray Binaries

NASA Astrophysics Data System (ADS)

van der Klis, M.; Murdin, P.

2000-11-01

The term quasiperiodic oscillation (QPO) is used in high-energy astrophysics for any type of non-periodic variability that is constrained to a relatively narrow range of variability frequencies. X-RAY BINARIES are systems in which a `compact object', either a BLACK HOLE or a NEUTRON STAR, orbits a normal star and captures matter from it. The matter spirals down to the compact object and heats up ...

Assessing and Evaluating Department of Defense Efforts to Inform, Influence, and Persuade: Work Example

DTIC Science & Technology

2017-01-01

reviewing and refining their initial objectives to ensure that these objectives are SMART: specific, measurable, achievable, relevant, and time -bound...should not conflate exposure and effectiveness where messaging is concerned, and they should aim to capture trends over time . Assessors should use...specific, measurable, achievable, relevant, and time -bound TAA target audience analysis TCO transnational criminal organization UN United Nations VEO

Near-Bottom Turbulence and Sediment Resuspension Induced by Nonlinear Internal Waves

DTIC Science & Technology

2012-09-30

boundary layer (BBL) turbulence and particulate resuspension leading to benthic nepheloid layer ( BNL ) formation. OBJECTIVES The specific objectives...capturing of nearbed particles by the BBL-turbulence and their transport/deposition into BNLs . • Analyze field observations from the New Jersey shelf to...generated resuspended particle distributions under NLIWs, a reliable proxy of BNLs , can be used to quantify the transmission or backscatter of optical

Near-Bottom Turbulence and Sediment Resuspension Induced by Nonlinear Internal Waves

DTIC Science & Technology

2014-09-30

boundary layer (BBL) turbulence and particulate resuspension leading to benthic nepheloid layer ( BNL ) formation. OBJECTIVES The specific objectives...identify mechanisms for the capturing of near-bed particles by the BBL-turbulence and their transport/deposition into BNLs . • Analyze field...distributions under NLIWs, a reliable proxy of BNLs , can be used to quantify the transmission or backscatter of optical/acoustic signals of importance to

Reference Model for Project Support Environments Version 1.0

DTIC Science & Technology

1993-02-28

relationship with the framework’s Process Support services and with the Lifecycle Process Engineering services. Examples: "* ORCA (Object-based...Design services. Examples: "* ORCA (Object-based Requirements Capture and Analysis). "* RETRAC (REquirements TRACeability). 4.3 Life-Cycle Process...34traditional" computer tools. Operations: Examples of audio and video processing operations include: "* Create, modify, and delete sound and video data

Transit safety retrofit package development : architecture and design specifications.

DOT National Transportation Integrated Search

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical objectives stated in the TRP requirements document. The document begins with an architectural overview that identifies and describes...

Variability of atmospheric greenhouse gases as a biogeochemical processing signal at regional scale in a karstic ecosystem

NASA Astrophysics Data System (ADS)

Borràs, Sílvia; Vazquez, Eusebi; Morguí, Josep-Anton; Àgueda, Alba; Batet, Oscar; Cañas, Lídia; Curcoll, Roger; Grossi, Claudia; Nofuentes, Manel; Occhipinti, Paola; Rodó, Xavier

2015-04-01

The South-eastern area of the Iberian Peninsula is an area where climatic conditions reach extreme climatic conditions during the year, and is also heavily affected by the ENSO and NAO. The Natural Park of Cazorla, Segura de la Sierra and Las Villas is located in this region, and it is the largest protected natural area in Spain (209920 Ha). This area is characterized by important climatic and hydrologic contrasts: although the mean annual precipitation is 770 nm, the karstic soils are the main cause for water scarcity during the summer months, while on the other hand it is in this area where the two main rivers of Southern Spain, the Segura and the Guadalquivir, are born. The protected area comprises many forested landscapes, karstic areas and reservoirs like Tranco de Beas. The temperatures during summer are high, with over 40°C heatwaves occurring each year. But during the winter months, the land surface can be covered by snow for periods of time up until 30 days. The ENSO and NAO influences cause also an important inter annual climatic variability in this area. Under the ENSO, autumnal periods are more humid while the following spring is drier. In this area vegetal Mediterranean communities are dominant. But there are also a high number of endemic species and derelict species typical of temperate climate. Therefore it is a protected area with high specific diversity. Additionally, there is an important agricultural activity in the fringe areas of the Natural Park, mainly for olive production, while inside the Park this activity is focused on mountain wheat production. Therefore the diverse vegetal communities and landscapes can easily be under extreme climatic pressures, affecting in turn the biogeochemical processes at the regional scale. The constant, high-frequency monitoring of greenhouse gases (GHG) (CO2 and CH4) integrates the biogeochemical signal of changes in this area related to the carbon cycle at the regional scale, capturing the high diversity of landscapes and climatic variability. The monitoring is carried out in one of the stations of the ClimaDat network, which consists of eight GHG monitoring stations in highly preserved ecosystems which are very sensitive to climate change in Spain. This constant monitoring will allow relating changes in terrestrial ecosystems, hydrological processes and atmospheric transport of GHG. The goal of the presentation is to show the results obtained since September 2013 through continuous monitoring, focusing on the seasonal changes in precipitation, temperature, and CO2 and CH4 changes in atmospheric concentrations.

Design of Stratified Functional Nanoporous Materials for CO 2 Capture and Conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, J. Karl; Ye, Jingyun

The objective of this project is to develop novel nanoporous materials for CO 2 capture and conversion. The motivation of this work is that capture of CO 2 from flue gas or the atmosphere coupled with catalytic hydrogenation of CO 2 into valuable chemicals and fuels can reduce the net amount of CO 2 in the atmosphere while providing liquid transportation fuels and other commodity chemicals. One approach to increasing the economic viability of carbon capture and conversion is to design a single material that can be used for both the capture and catalytic conversion of CO 2, because suchmore » a material could increase efficiency through process intensification. We have used density functional theory (DFT) methods to design catalytic moieties that can be incorporated into various metal organic framework (MOF) materials. We chose to work with MOFs because they are highly tailorable, can be functionalized, and have been shown to selectively adsorb CO 2 over N 2, which is a requirement for CO 2 capture from flue gas. Moreover, the incorporation of molecular catalytic moieties into MOF, through covalent bonding, produces a heterogeneous catalytic material having activities and selectivities close to those of homogeneous catalysts, but without the draw-backs associated with homogeneous catalysis.« less

Aging and involuntary attention capture: electrophysiological evidence for preserved attentional control with advanced age.

PubMed

Lien, Mei-Ching; Gemperle, Alison; Ruthruff, Eric

2011-03-01

The present study examined whether people become more susceptible to capture by salient objects as they age. Participants searched a target display for a letter in a specific color and indicated its identity. In Experiment 1, this target display was preceded by a non-informative cue display containing one target-color box, one ignored-color box, and two white boxes. On half of the trials, this cue display also contained a salient-but-irrelevant abrupt onset. To assess capture by the target-color cue, we used the N2pc component of the event-related potential, thought to reflect attentional allocation to the left or right visual field. The target-color box in the cue display produced a substantial N2pc effect for younger adults and, most importantly, this effect was not diminished by the presence of an abrupt onset. Therefore, the abrupt onset was unable to capture attention away from the target-color cue. Critically, older adults demonstrated the same resistance to capture by the abrupt onset. Experiment 2 extended these findings to irrelevant color singleton cues. Thus, we argue that the ability to attend to relevant stimuli and resist capture by salient-but-irrelevant stimuli is preserved with advancing age. (c) 2011 APA, all rights reserved.

Asteroid Redirect Robotic Mission: Robotic Boulder Capture Option Overview

NASA Technical Reports Server (NTRS)

Mazanek, Daniel D.; Merrill, Raymond G.; Belbin, Scott P.; Reeves, David M.; Earle, Kevin D.; Naasz, Bo J.; Abell, Paul A.

2014-01-01

The National Aeronautics and Space Administration (NASA) is currently studying an option for the Asteroid Redirect Robotic Mission (ARRM) that would capture a multi-ton boulder (typically 2-4 meters in size) from the surface of a large (is approximately 100+ meter) Near-Earth Asteroid (NEA) and return it to cislunar space for subsequent human and robotic exploration. This alternative mission approach, designated the Robotic Boulder Capture Option (Option B), has been investigated to determine the mission feasibility and identify potential differences from the initial ARRM concept of capturing an entire small NEA (4-10 meters in size), which has been designated the Small Asteroid Capture Option (Option A). Compared to the initial ARRM concept, Option B allows for centimeter-level characterization over an entire large NEA, the certainty of target NEA composition type, the ability to select the boulder that is captured, numerous opportunities for mission enhancements to support science objectives, additional experience operating at a low-gravity planetary body including extended surface contact, and the ability to demonstrate future planetary defense strategies on a hazardous-size NEA. Option B can leverage precursor missions and existing Agency capabilities to help ensure mission success by targeting wellcharacterized asteroids and can accommodate uncertain programmatic schedules by tailoring the return mass.

Capturing method for integral three-dimensional imaging using multiviewpoint robotic cameras

NASA Astrophysics Data System (ADS)

Ikeya, Kensuke; Arai, Jun; Mishina, Tomoyuki; Yamaguchi, Masahiro

2018-03-01

Integral three-dimensional (3-D) technology for next-generation 3-D television must be able to capture dynamic moving subjects with pan, tilt, and zoom camerawork as good as in current TV program production. We propose a capturing method for integral 3-D imaging using multiviewpoint robotic cameras. The cameras are controlled through a cooperative synchronous system composed of a master camera controlled by a camera operator and other reference cameras that are utilized for 3-D reconstruction. When the operator captures a subject using the master camera, the region reproduced by the integral 3-D display is regulated in real space according to the subject's position and view angle of the master camera. Using the cooperative control function, the reference cameras can capture images at the narrowest view angle that does not lose any part of the object region, thereby maximizing the resolution of the image. 3-D models are reconstructed by estimating the depth from complementary multiviewpoint images captured by robotic cameras arranged in a two-dimensional array. The model is converted into elemental images to generate the integral 3-D images. In experiments, we reconstructed integral 3-D images of karate players and confirmed that the proposed method satisfied the above requirements.

Point pattern match-based change detection in a constellation of previously detected objects

DOEpatents

Paglieroni, David W.

2016-06-07

A method and system is provided that applies attribute- and topology-based change detection to objects that were detected on previous scans of a medium. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, detection strength, size, elongation, orientation, etc. The locations define a three-dimensional network topology forming a constellation of previously detected objects. The change detection system stores attributes of the previously detected objects in a constellation database. The change detection system detects changes by comparing the attributes and topological consistency of newly detected objects encountered during a new scan of the medium to previously detected objects in the constellation database. The change detection system may receive the attributes of the newly detected objects as the objects are detected by an object detection system in real time.

Aldo van Eyck’s Playgrounds: Aesthetics, Affordances, and Creativity

PubMed Central

Withagen, Rob; Caljouw, Simone R.

2017-01-01

After World War II, the Dutch architect Aldo van Eyck developed hundreds of playgrounds in the city of Amsterdam. These public playgrounds were located in parks, squares, and derelict sites, and consisted of minimalistic aesthetic play equipment that was supposed to stimulate the creativity of children. Over the last decades, these playgrounds have been studied by sociologists, theorists of art and architecture, and psychologists. Adopting an ecological approach to the human environment, it is argued that the abstract forms of van Eyck’s play sculptures indeed stimulate the creativity of the child. Whereas a slide or a swing almost dictates what a child is supposed to do, van Eyck’s play equipment invites the child to actively explore the numerous affordances (action possibilities) it provided. However, it is argued that the standardization (e.g., equal distances between blocks or bars) that tends to characterize van Eyck’ play equipment has negative effects on the playability. This standardization, which was arguably the result of the aesthetic motives of the designer, might be appealing to children when simply looking at the equipment, but it is not of overriding importance to them when playing in it. Indeed, a recent study indicates that the affordances provided by messy structures appear to have a greater appeal to playing children. PMID:28725208

Phytostabilisation with Mediterranean shrubs and liming improved soil quality in a pot experiment with a pyrite mine soil.

PubMed

Moreno-Jiménez, Eduardo; Esteban, Elvira; Carpena-Ruiz, Ramón O; Lobo, María Carmen; Peñalosa, Jesús M

2012-01-30

Phytoremediation can be a suitable option to manage derelict mine soils. A pot experiment was carried out under semi-controlled conditions with a mine-impacted soil. A further contamination event was mimicked by applying 5% of pyritic sludge. Four species were planted in pots (Myrtus communis, Retama sphaerocarpa, Rosmarinus officinalis and Tamarix gallica), and some pots remained unplanted as a control. The substrates were moderately to highly contaminated, mainly with arsenic and zinc. The strong acidification induced by the pyritic sludge was buffered with lime and plants survived in all the pots. Liming provoked an effective immobilisation of metals and arsenic. Plant establishment decreased labile As in the substrate by 50%, mainly M. communis, although the levels of extractable metals were not affected by the plants. R. sphaerocarpa and M. communis increased the levels of C and N in the soil by 23% and 34% respectively, and also enhanced enzymatic activities and microbial respiration to the double in some cases. The low transfer of trace elements to shoots limited the phytoextraction rate. Our results support the use of phytostabilisation in Mediterranean mine soils and show how plants of R. sphaerocarpa and M. communis may increase soil health and quality during revegetation. Copyright © 2011 Elsevier B.V. All rights reserved.

Deep Neural Networks as a Computational Model for Human Shape Sensitivity

PubMed Central

Op de Beeck, Hans P.

2016-01-01

Theories of object recognition agree that shape is of primordial importance, but there is no consensus about how shape might be represented, and so far attempts to implement a model of shape perception that would work with realistic stimuli have largely failed. Recent studies suggest that state-of-the-art convolutional ‘deep’ neural networks (DNNs) capture important aspects of human object perception. We hypothesized that these successes might be partially related to a human-like representation of object shape. Here we demonstrate that sensitivity for shape features, characteristic to human and primate vision, emerges in DNNs when trained for generic object recognition from natural photographs. We show that these models explain human shape judgments for several benchmark behavioral and neural stimulus sets on which earlier models mostly failed. In particular, although never explicitly trained for such stimuli, DNNs develop acute sensitivity to minute variations in shape and to non-accidental properties that have long been implicated to form the basis for object recognition. Even more strikingly, when tested with a challenging stimulus set in which shape and category membership are dissociated, the most complex model architectures capture human shape sensitivity as well as some aspects of the category structure that emerges from human judgments. As a whole, these results indicate that convolutional neural networks not only learn physically correct representations of object categories but also develop perceptually accurate representational spaces of shapes. An even more complete model of human object representations might be in sight by training deep architectures for multiple tasks, which is so characteristic in human development. PMID:27124699

GRO: Black hole models for gamma ray bursts

NASA Technical Reports Server (NTRS)

Shaham, Jacob

1993-01-01

This grant deals with the production of gamma-ray bursts (GRB's) close to horizons of black holes (BH's), mainly via accretion of small chunks of matter onto extreme Kerr BH's. In the past year, we laid the ground work for actual calculations close to Kerr BH's. Because of technical reasons, actual work has only started very recently. Following the detailed list of research subprojects as per our original proposal, we have performed research in the following areas: spectrum calculation; burst dynamics; tidal capture and primordial cloud collapse; halo density profile; and capture of other objects.

Reusable Agena study. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Carter, W. K.; Piper, J. E.; Douglass, D. A.; Waller, E. W.; Hopkins, C. V.; Fitzgerald, E. T.; Sagawa, S. S.; Carter, S. A.; Jensen, H. L.

1974-01-01

The application of the existing Agena vehicle as a reusable upper stage for the space shuttle is discussed. The primary objective of the study is to define those changes to the Agena required for it to function in the reusable mode in the 100 percent capture of the NASA-DOD mission model. This 100 percent capture is achieved without use of kick motors or stages by simply increasing the Agena propellant load by using optional strap-on-tanks. The required shuttle support equipment, launch and flight operations techniques, development program, and cost package are also defined.

Context and competition in the capture of visual attention.

PubMed

Hickey, Clayton; Theeuwes, Jan

2011-10-01

Competition-based models of visual attention propose that perceptual ambiguity is resolved through inhibition, which is stronger when objects share a greater number of neural receptive fields (RFs). According to this theory, the misallocation of attention to a salient distractor--that is, the capture of attention--can be indexed in RF-scaled interference costs. We used this pattern to investigate distractor-related costs in visual search across several manipulations of temporal context. Distractor costs are generally larger under circumstances in which the distractor can be defined by features that have recently characterised the target, suggesting that capture occurs in these trials. However, our results show that search for a target in the presence of a salient distractor also produces RF-scaled costs when the features defining the target and distractor do not vary from trial to trial. Contextual differences in distractor costs appear to reflect something other than capture, perhaps a qualitative difference in the type of attentional mechanism deployed to the distractor.

Motion onset does not capture attention when subsequent motion is "smooth".

PubMed

Sunny, Meera Mary; von Mühlenen, Adrian

2011-12-01

Previous research on the attentional effects of moving objects has shown that motion per se does not capture attention. However, in later studies it was argued that the onset of motion does capture attention. Here, we show that this motion-onset effect critically depends on motion jerkiness--that is, the rate at which the moving stimulus is refreshed. Experiment 1 used search displays with a static, a motion-onset, and an abrupt-onset stimulus, while systematically varying the refresh rate of the moving stimulus. The results showed that motion onset only captures attention when subsequent motion is jerky (8 and 17 Hz), not when it is smooth (33 and 100 Hz). Experiment 2 replaced motion onset with continuous motion, showing that motion jerkiness does not affect how continuous motion is processed. These findings do not support accounts that assume a special role for motion onset, but they are in line with the more general unique-event account.

Video capture virtual reality as a flexible and effective rehabilitation tool

PubMed Central

Weiss, Patrice L; Rand, Debbie; Katz, Noomi; Kizony, Rachel

2004-01-01

Video capture virtual reality (VR) uses a video camera and software to track movement in a single plane without the need to place markers on specific bodily locations. The user's image is thereby embedded within a simulated environment such that it is possible to interact with animated graphics in a completely natural manner. Although this technology first became available more than 25 years ago, it is only within the past five years that it has been applied in rehabilitation. The objective of this article is to describe the way this technology works, to review its assets relative to other VR platforms, and to provide an overview of some of the major studies that have evaluated the use of video capture technologies for rehabilitation. PMID:15679949

Bench Scale Process for Low Cost CO 2 Capture Using a PhaseChanging Absorbent: Techno-Economic Analysis Topical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miebach, Barbara; McDuffie, Dwayne; Spiry, Irina

The objective of this project is to design and build a bench-scale process for a novel phase-changing CO 2 capture solvent. The project will establish scalability and technical and economic feasibility of using a phase-changing CO 2 capture absorbent for post-combustion capture of CO 2 from coal-fired power plants with 90% capture efficiency and 95% CO 2 purity at a cost of $40/tonne of CO 2 captured by 2025 and a cost of <$10/tonne of CO 2 captured by 2035. This report presents system and economic analysis for a process that uses a phase changing aminosilicone solvent to remove COmore » 2 from pulverized coal (PC) power plant flue gas. The aminosilicone solvent is a pure 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane (GAP-0). Performance of the phase-changing aminosilicone technology is compared to that of a conventional carbon capture system using aqueous monoethanolamine (MEA). This analysis demonstrates that the aminosilicone process has significant advantages relative to an MEA-based system. The first-year CO 2 removal cost for the phase-changing CO 2 capture process is $52.1/tonne, compared to $66.4/tonne for the aqueous amine process. The phase-changing CO 2 capture process is less costly than MEA because of advantageous solvent properties that include higher working capacity, lower corrosivity, lower vapor pressure, and lower heat capacity. The phase-changing aminosilicone process has approximately 32% lower equipment capital cost compared to that of the aqueous amine process. However, this solvent is susceptible to thermal degradation at CSTR desorber operating temperatures, which could add as much as $88/tonne to the CO 2 capture cost associated with solvent makeup. Future work is focused on mitigating this critical risk by developing an advanced low-temperature desorber that can deliver comparable desorption performance and significantly reduced thermal degradation rate.« less

Carbon dioxide capture from atmospheric air using sodium hydroxide spray.

PubMed

Stolaroff, Joshuah K; Keith, David W; Lowry, Gregory V

2008-04-15

In contrast to conventional carbon capture systems for power plants and other large point sources, the system described in this paper captures CO2 directly from ambient air. This has the advantages that emissions from diffuse sources and past emissions may be captured. The objective of this research is to determine the feasibility of a NaOH spray-based contactor for use in an air capture system by estimating the cost and energy requirements per unit CO2 captured. A prototype system is constructed and tested to measure CO2 absorption, energy use, and evaporative water loss and compared with theoretical predictions. A numerical model of drop collision and coalescence is used to estimate operating parameters for a full-scale system, and the cost of operating the system per unit CO2 captured is estimated. The analysis indicates that CO2 capture from air for climate change mitigation is technically feasible using off-the-shelf technology. Drop coalescence significantly decreases the CO2 absorption efficiency; however, fan and pump energy requirements are manageable. Water loss is significant (20 mol H2O/mol CO2 at 15 degrees C and 65% RH) but can be lowered by appropriately designing and operating the system. The cost of CO2 capture using NaOH spray (excluding solution recovery and CO2 sequestration, which may be comparable) in the full-scale system is 96 $/ton-CO2 in the base case, and ranges from 53 to 127 $/ton-CO2 under alternate operating parameters and assumptions regarding capital costs and mass transfer rate. The low end of the cost range is reached by a spray with 50 microm mean drop diameter, which is achievable with commercially available spray nozzles.

A comparison of hematology, plasma chemistry, and injuries in Hickory shad (Alosa mediocris) captured by electrofishing or angling during a spawning run.

PubMed

Matsche, Mark A; Rosemary, Kevin; Stence, Charles P

2017-09-01

Declines in Hickory shad (Alosa mediocris) populations in Chesapeake Bay have prompted efforts at captive propagation of wild broodfish for stock enhancement and research. The objectives of this study were to evaluate injuries sustained, and immediate and delayed (24 hours) effects on blood variables related to 2 fish capturing methods (electrofishing [EF] and angling). Blood specimens were collected from fish immediately following capture by EF and angling (n = 40 per sex and capture method) from the Susquehanna River (MD, USA). Additional fish (n = 25 per sex and capture method) were collected on the same day, placed in holding tanks and bled 24 hours following capture. Blood data that were non-Gaussian in distribution were transformed (Box-Cox), and effects of sex, method of capture, and holding time were tested using ANOVA with general linear models. Fish were evaluated for injuries by necropsy and radiography. Sex-specific differences were observed for RBC, HGB, PCV, MCH, MCHC, total proteins (TP), globulins, glucose, calcium, AST, CK, and lactate, while RBC, HGB, PCV, MCV, MCH, MCHC, TP, albumin, globulins, glucose, potassium, sodium, AST, CK, and lactate differed significantly by fish capturing method. Electrofishing may have induced greater disruption in blood variables, but mortality (4%) was not significantly different compared to angling. Electrofishing for Hickory shad using a constant DC voltage resulted in numerous hematologic and biochemical changes, with no additional injuries or deaths compared to angling. Capture method must be considered when evaluating fish condition, and blood variables should be partitioned by sex during spawning season. © 2017 American Society for Veterinary Clinical Pathology.

Object Based Systems Engineering

DTIC Science & Technology

2011-10-17

practically impossible where the original SMEs are unavailable or lack perfect recall. 7. Capture the precious and transient logic behind this...complex system. References 1. FITCH, J. Exploiting Decision-to-Requirements Traceability, briefing to NDIA CMMI Conference, November, 2009 2

Dual-dimensional microscopy: real-time in vivo three-dimensional observation method using high-resolution light-field microscopy and light-field display.

PubMed

Kim, Jonghyun; Moon, Seokil; Jeong, Youngmo; Jang, Changwon; Kim, Youngmin; Lee, Byoungho

2018-06-01

Here, we present dual-dimensional microscopy that captures both two-dimensional (2-D) and light-field images of an in-vivo sample simultaneously, synthesizes an upsampled light-field image in real time, and visualizes it with a computational light-field display system in real time. Compared with conventional light-field microscopy, the additional 2-D image greatly enhances the lateral resolution at the native object plane up to the diffraction limit and compensates for the image degradation at the native object plane. The whole process from capturing to displaying is done in real time with the parallel computation algorithm, which enables the observation of the sample's three-dimensional (3-D) movement and direct interaction with the in-vivo sample. We demonstrate a real-time 3-D interactive experiment with Caenorhabditis elegans. (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Classification of Movement of People with Parkinsons Disease Using Wearable Inertial Movement Units and Machine Learning.

PubMed

Ireland, David; Wang, Ziwei; Lamont, Robyn; Liddle, Jacki

2016-01-01

In this work, inertial movement units were placed on people with Parkinsons disease (PwPD) who subsequently performed a standard test of walking endurance (six-minute walk test - 6MWT). Five devices were placed on each the limbs and small of the back. These devices captured the acceleration and rotational motion while the person walked as far as they can in six minutes. The wearable devices can objectively indicate the pattern and rhythmicity of limb and body movements. It is possible that this data, when subject to machine learning could provide additional objective measures that may support clinical observations related to the quality of movement. The aim of this work is two fold. First, to identify the most useful features of the captured signals; second, to identify the accuracy of using these features to predict the severity of PD as measured by standard clinical assessment.

Salient object detection: manifold-based similarity adaptation approach

NASA Astrophysics Data System (ADS)

Zhou, Jingbo; Ren, Yongfeng; Yan, Yunyang; Gao, Shangbing

2014-11-01

A saliency detection algorithm based on manifold-based similarity adaptation is proposed. The proposed algorithm is divided into three steps. First, we segment an input image into superpixels, which are represented as the nodes in a graph. Second, a new similarity measurement is used in the proposed algorithm. The weight matrix of the graph, which indicates the similarities between the nodes, uses a similarity-based method. It also captures the manifold structure of the image patches, in which the graph edges are determined in a data adaptive manner in terms of both similarity and manifold structure. Then, we use local reconstruction method as a diffusion method to obtain the saliency maps. The objective function in the proposed method is based on local reconstruction, with which estimated weights capture the manifold structure. Experiments on four bench-mark databases demonstrate the accuracy and robustness of the proposed method.

Captures of Boll Weevils (Coleoptera: Curculionidae) in Relation to Trap Orientation and Distance From Brush Lines.

PubMed

Spurgeon, Dale W

2016-04-01

Eradication programs for the boll weevil (Anthonomus grandis grandis Boheman) rely on pheromone-baited traps to trigger insecticide treatments and monitor program progress. A key objective of monitoring in these programs is the timely detection of incipient weevil populations to limit or prevent re-infestation. Therefore, improvements in the effectiveness of trapping would enhance efforts to achieve and maintain eradication. Association of pheromone traps with woodlots and other prominent vegetation are reported to increase captures of weevils, but the spatial scale over which this effect occurs is unknown. The influences of trap distance (0, 10, and 20 m) and orientation (leeward or windward) to brush lines on boll weevil captures were examined during three noncropping seasons (October to February) in the Rio Grande Valley of Texas. Differences in numbers of captured weevils and in the probability of capture between traps at 10 or 20 m from brush, although often statistically significant, were generally small and variable. Variations in boll weevil population levels, wind directions, and wind speeds apparently contributed to this variability. In contrast, traps closely associated with brush (0 m) generally captured larger numbers of weevils, and offered a higher probability of weevil capture compared with traps away from brush. These increases in the probability of weevil capture were as high as 30%. Such increases in the ability of traps to detect low-level boll weevil populations indicate trap placement with respect to prominent vegetation is an important consideration in maximizing the effectiveness of trap-based monitoring for the boll weevil.

Universal algorithm for diagnosis of biventricular capture in patients with cardiac resynchronization therapy.

PubMed

Jastrzebski, Marek; Kukla, Piotr; Fijorek, Kamil; Czarnecka, Danuta

2014-08-01

An accurate and universal method for diagnosis of biventricular (BiV) capture using a standard 12-lead electrocardiogram (ECG) would be useful for assessment of cardiac resynchronization therapy (CRT) patients. Our objective was to develop and validate such an ECG method for BiV capture diagnosis that would be independent of pacing lead positions-a major confounder that significantly influences the morphologies of paced QRS complexes. On the basis of an evaluation of 789 ECGs of 443 patients with heart failure and various right ventricular (RV) and left ventricular (LV) lead positions, the following algorithm was constructed and validated. BiV capture was diagnosed if the QRS in lead I was predominantly negative and either V1 QRS was predominantly positive or V6 QRS was of negative onset and predominantly negative (step 1), or if QRS complex duration was <160 ms (step 2). All other ECGs were classified as loss of LV capture. The algorithm showed good accuracy (93%), sensitivity (97%), and specificity (90%) for detection of loss of LV capture. The performance of the algorithm did not differ among apical, midseptal, and outflow tract RV lead positions and various LV lead positions. LV capture leaves diagnostic hallmarks in the fused BiV QRS related to different vectors of depolarization and more rapid depolarization of the ventricles. An accurate two-step ECG algorithm for BiV capture diagnosis was developed and validated. This algorithm is universally applicable to all CRT patients, regardless of the positions of the pacing leads. ©2014 Wiley Periodicals, Inc.

Effective motion planning strategy for space robot capturing targets under consideration of the berth position

NASA Astrophysics Data System (ADS)

Zhang, Xin; Liu, Jinguo

2018-07-01

Although many motion planning strategies for missions involving space robots capturing floating targets can be found in the literature, relatively little has discussed how to select the berth position where the spacecraft base hovers. In fact, the berth position is a flexible and controllable factor, and selecting a suitable berth position has a great impact on improving the efficiency of motion planning in the capture mission. Therefore, to make full use of the manoeuvrability of the space robot, this paper proposes a new viewpoint that utilizes the base berth position as an optimizable parameter to formulate a more comprehensive and effective motion planning strategy. Considering the dynamic coupling, the dynamic singularities, and the physical limitations of space robots, a unified motion planning framework based on the forward kinematics and parameter optimization technique is developed to convert the planning problem into the parameter optimization problem. For getting rid of the strict grasping position constraints in the capture mission, a new conception of grasping area is proposed to greatly simplify the difficulty of the motion planning. Furthermore, by utilizing the penalty function method, a new concise objective function is constructed. Here, the intelligent algorithm, Particle Swarm Optimization (PSO), is worked as solver to determine the free parameters. Two capturing cases, i.e., capturing a two-dimensional (2D) planar target and capturing a three-dimensional (3D) spatial target, are studied under this framework. The corresponding simulation results demonstrate that the proposed method is more efficient and effective for planning the capture missions.

Informative Feature Selection for Object Recognition via Sparse PCA

DTIC Science & Technology

2011-04-07

constraint on images collected from low-power camera net- works instead of high-end photography is that establishing wide-baseline feature correspondence of...variable selection tool for selecting informative features in the object images captured from low-resolution cam- era sensor networks. Firstly, we...More examples can be found in Figure 4 later. 3. Identifying Informative Features Classical PCA is a well established tool for the analysis of high

Manipulation of micro-objects using acoustically oscillating bubbles based on the gas permeability of PDMS.

PubMed

Liu, Bendong; Tian, Baohua; Yang, Xu; Li, Mohan; Yang, Jiahui; Li, Desheng; Oh, Kwang W

2018-05-01

This paper presents a novel manipulation method for micro-objects using acoustically oscillating bubbles with a controllable position based on the gas permeability of polydimethylsiloxane. The oscillating bubble trapped within the side channel attracts the neighboring micro-objects, and the position of the air-liquid interface is controlled by generating temporary pressure difference between the side channel and the air channel. To demonstrate the feasibility of the method in technological applications, polystyrene microparticles of 10  μ m in diameter were successfully captured, transported, and released. The influence of pressure difference on the movement speed of the air-liquid interface was demonstrated in our experiments, and the manipulation performance was also characterized by varying the frequency of the acoustic excitation and the pressure difference. Since the bubble generation and the air-liquid interface movement in our manipulation method do not need any electrochemical reaction and any high temperature, this on-chip manipulation method provides a controllable, efficient, and noninvasive tool for handling micro-objects such as particles, cells, and other entities. The whole manipulation process, including capturing, transporting, and releasing of particles, spent less than 1 min. It can be used to select the cells and particles in the microfluidic device or change the cell culture medium.

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback

PubMed Central

Liu, Haoting; Zhou, Qianxiang; Yang, Jin; Jiang, Ting; Liu, Zhizhen; Li, Jie

2017-01-01

An imaging sensor-based intelligent Light Emitting Diode (LED) lighting system for desk use is proposed. In contrast to the traditional intelligent lighting system, such as the photosensitive resistance sensor-based or the infrared sensor-based system, the imaging sensor can realize a finer perception of the environmental light; thus it can guide a more precise lighting control. Before this system works, first lots of typical imaging lighting data of the desk application are accumulated. Second, a series of subjective and objective Lighting Effect Evaluation Metrics (LEEMs) are defined and assessed for these datasets above. Then the cluster benchmarks of these objective LEEMs can be obtained. Third, both a single LEEM-based control and a multiple LEEMs-based control are developed to realize a kind of optimal luminance tuning. When this system works, first it captures the lighting image using a wearable camera. Then it computes the objective LEEMs of the captured image and compares them with the cluster benchmarks of the objective LEEMs. Finally, the single LEEM-based or the multiple LEEMs-based control can be implemented to get a kind of optimal lighting effect. Many experiment results have shown the proposed system can tune the LED lamp automatically according to environment luminance changes. PMID:28208781

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback.

PubMed

Liu, Haoting; Zhou, Qianxiang; Yang, Jin; Jiang, Ting; Liu, Zhizhen; Li, Jie

2017-02-09

An imaging sensor-based intelligent Light Emitting Diode (LED) lighting system for desk use is proposed. In contrast to the traditional intelligent lighting system, such as the photosensitive resistance sensor-based or the infrared sensor-based system, the imaging sensor can realize a finer perception of the environmental light; thus it can guide a more precise lighting control. Before this system works, first lots of typical imaging lighting data of the desk application are accumulated. Second, a series of subjective and objective Lighting Effect Evaluation Metrics (LEEMs) are defined and assessed for these datasets above. Then the cluster benchmarks of these objective LEEMs can be obtained. Third, both a single LEEM-based control and a multiple LEEMs-based control are developed to realize a kind of optimal luminance tuning. When this system works, first it captures the lighting image using a wearable camera. Then it computes the objective LEEMs of the captured image and compares them with the cluster benchmarks of the objective LEEMs. Finally, the single LEEM-based or the multiple LEEMs-based control can be implemented to get a kind of optimal lighting effect. Many experiment results have shown the proposed system can tune the LED lamp automatically according to environment luminance changes.

Inertial parameter identification using contact force information for an unknown object captured by a space manipulator

NASA Astrophysics Data System (ADS)

Chu, Zhongyi; Ma, Ye; Hou, Yueyang; Wang, Fengwen

2017-02-01

This paper presents a novel identification method for the intact inertial parameters of an unknown object in space captured by a manipulator in a space robotic system. With strong dynamic and kinematic coupling existing in the robotic system, the inertial parameter identification of the unknown object is essential for the ideal control strategy based on changes in the attitude and trajectory of the space robot via capturing operations. Conventional studies merely refer to the principle and theory of identification, and an error analysis process of identification is deficient for a practical scenario. To solve this issue, an analysis of the effect of errors on identification is illustrated first, and the accumulation of measurement or estimation errors causing poor identification precision is demonstrated. Meanwhile, a modified identification equation incorporating the contact force, as well as the force/torque of the end-effector, is proposed to weaken the accumulation of errors and improve the identification accuracy. Furthermore, considering a severe disturbance condition caused by various measured noises, the hybrid immune algorithm, Recursive Least Squares and Affine Projection Sign Algorithm (RLS-APSA), is employed to decode the modified identification equation to ensure a stable identification property. Finally, to verify the validity of the proposed identification method, the co-simulation of ADAMS-MATLAB is implemented by multi-degree of freedom models of a space robotic system, and the numerical results show a precise and stable identification performance, which is able to guarantee the execution of aerospace operations and prevent failed control strategies.

Quantitative metrics for assessment of chemical image quality and spatial resolution

DOE PAGES

Kertesz, Vilmos; Cahill, John F.; Van Berkel, Gary J.

2016-02-28

Rationale: Currently objective/quantitative descriptions of the quality and spatial resolution of mass spectrometry derived chemical images are not standardized. Development of these standardized metrics is required to objectively describe chemical imaging capabilities of existing and/or new mass spectrometry imaging technologies. Such metrics would allow unbiased judgment of intra-laboratory advancement and/or inter-laboratory comparison for these technologies if used together with standardized surfaces. Methods: We developed two image metrics, viz., chemical image contrast (ChemIC) based on signal-to-noise related statistical measures on chemical image pixels and corrected resolving power factor (cRPF) constructed from statistical analysis of mass-to-charge chronograms across features of interest inmore » an image. These metrics, quantifying chemical image quality and spatial resolution, respectively, were used to evaluate chemical images of a model photoresist patterned surface collected using a laser ablation/liquid vortex capture mass spectrometry imaging system under different instrument operational parameters. Results: The calculated ChemIC and cRPF metrics determined in an unbiased fashion the relative ranking of chemical image quality obtained with the laser ablation/liquid vortex capture mass spectrometry imaging system. These rankings were used to show that both chemical image contrast and spatial resolution deteriorated with increasing surface scan speed, increased lane spacing and decreasing size of surface features. Conclusions: ChemIC and cRPF, respectively, were developed and successfully applied for the objective description of chemical image quality and spatial resolution of chemical images collected from model surfaces using a laser ablation/liquid vortex capture mass spectrometry imaging system.« less

Quantitative metrics for assessment of chemical image quality and spatial resolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kertesz, Vilmos; Cahill, John F.; Van Berkel, Gary J.

Rationale: Currently objective/quantitative descriptions of the quality and spatial resolution of mass spectrometry derived chemical images are not standardized. Development of these standardized metrics is required to objectively describe chemical imaging capabilities of existing and/or new mass spectrometry imaging technologies. Such metrics would allow unbiased judgment of intra-laboratory advancement and/or inter-laboratory comparison for these technologies if used together with standardized surfaces. Methods: We developed two image metrics, viz., chemical image contrast (ChemIC) based on signal-to-noise related statistical measures on chemical image pixels and corrected resolving power factor (cRPF) constructed from statistical analysis of mass-to-charge chronograms across features of interest inmore » an image. These metrics, quantifying chemical image quality and spatial resolution, respectively, were used to evaluate chemical images of a model photoresist patterned surface collected using a laser ablation/liquid vortex capture mass spectrometry imaging system under different instrument operational parameters. Results: The calculated ChemIC and cRPF metrics determined in an unbiased fashion the relative ranking of chemical image quality obtained with the laser ablation/liquid vortex capture mass spectrometry imaging system. These rankings were used to show that both chemical image contrast and spatial resolution deteriorated with increasing surface scan speed, increased lane spacing and decreasing size of surface features. Conclusions: ChemIC and cRPF, respectively, were developed and successfully applied for the objective description of chemical image quality and spatial resolution of chemical images collected from model surfaces using a laser ablation/liquid vortex capture mass spectrometry imaging system.« less

On-orbit demonstration of automated closure and capture using ESA-developed proximity operations technologies and an existing, serviceable NASA Explorer Platform spacecraft

NASA Technical Reports Server (NTRS)

Hohwiesner, Bill; Claudinon, Bernard

1991-01-01

The European Space Agency (ESA) has been working to develop an autonomous rendezvous and docking capability since 1984 to enable Hermes to automatically dock with Columbus. As a result, ESA with Matra, MBB, and other space companies have developed technologies that are also directly supportive of the current NASA initiative for Automated Rendezvous and Capture. Fairchild and Matra would like to discuss the results of the applicable ESA/Matra rendezvous and capture developments, and suggest how these capabilities could be used, together with an existing NASA Explorer Platform satellite, to minimize new development and accomplish a cost effective automatic closure and capture demonstration program. Several RV sensors have been developed at breadboard level for the Hermes/Columbus program by Matra, MBB, and SAAB. Detailed algorithms for automatic rendezvous, closure, and capture have been developed by ESA and CNES for application with Hermes to Columbus rendezvous and docking, and they currently are being verified with closed-loop software simulation. The algorithms have multiple closed-loop control modes and phases starting at long range using GPS navigation. Differential navigation is used for coast/continuous thrust homing, holdpoint acquisition, V-bar hopping, and station point acquisition. The proximity operation sensor is used for final closure and capture. A subset of these algorithms, comprising the proximity operations algorithms, could easily be extracted and tailored to a limited objective closure and capture flight demonstration.

Capture of activation during ventricular arrhythmia using distributed stimulation.

PubMed

Meunier, Jason M; Ramalingam, Sanjiv; Lin, Shien-Fong; Patwardhan, Abhijit R

2007-04-01

Results of previous studies suggest that pacing strength stimuli can capture activation during ventricular arrhythmia locally near pacing sites. The existence of spatio-temporal distribution of excitable gap during arrhythmia suggests that multiple and timed stimuli delivered over a region may permit capture over larger areas. Our objective in this study was to evaluate the efficacy of using spatially distributed pacing (DP) to capture activation during ventricular arrhythmia. Data were obtained from rabbit hearts which were placed against a lattice of parallel wires through which biphasic pacing stimuli were delivered. Electrical activity was recorded optically. Pacing stimuli were delivered in sequence through the parallel wires starting with the wire closest to the apex and ending with one closest to the base. Inter-stimulus delay was based on conduction velocity. Time-frequency analysis of optical signals was used to determine variability in activation. A decrease in standard deviation of dominant frequencies of activation from a grid of locations that spanned the captured area and a concurrence with paced frequency were used as an index of capture. Results from five animals showed that the average standard deviation decreased from 0.81 Hz during arrhythmia to 0.66 Hz during DP at pacing cycle length of 125 ms (p = 0.03) reflecting decreased spatio-temporal variability in activation during DP. Results of time-frequency analysis during these pacing trials showed agreement between activation and paced frequencies. These results show that spatially distributed and timed stimulation can be used to modify and capture activation during ventricular arrhythmia.

An analysis of characteristics of post-authorisation studies registered on the ENCePP EU PAS Register

PubMed Central

Carroll, Robert; Ramagopalan, Sreeram V.; Cid-Ruzafa, Javier; Lambrelli, Dimitra; McDonald, Laura

2017-01-01

Background: The objective of this study was to investigate the study design characteristics of Post-Authorisation Studies (PAS) requested by the European Medicines Agency which were recorded on the European Union (EU) PAS Register held by the European Network of Centres for Pharmacoepidemiology and Pharmacovigilance (ENCePP). Methods: We undertook a cross-sectional descriptive analysis of all studies registered on the EU PAS Register as of 18 th October 2016. Results: We identified a total of 314 studies on the EU PAS Register, including 81 (26%) finalised, 160 (51%) ongoing and 73 (23%) planned. Of those studies identified, 205 (65%) included risk assessment in their scope, 133 (42%) included drug utilisation and 94 (30%) included effectiveness evaluation. Just over half of the studies (175; 56%) used primary data capture, 135 (43%) used secondary data and 4 (1%) used a hybrid design combining both approaches. Risk assessment and effectiveness studies were more likely to use primary data capture (60% and 85% respectively as compared to 39% and 14% respectively for secondary). The converse was true for drug utilisation studies where 59% were secondary vs. 39% for primary. For type 2 diabetes mellitus, database studies were more commonly used (80% vs 3% chart review, 3% hybrid and 13% primary data capture study designs) whereas for studies in oncology, primary data capture were more likely to be used (85% vs 4% chart review, and 11% database study designs). Conclusions: Results of this analysis show that PAS design varies according to study objectives and therapeutic area. PMID:29188016

Grayscale imbalance correction in real-time phase measuring profilometry

NASA Astrophysics Data System (ADS)

Zhu, Lin; Cao, Yiping; He, Dawu; Chen, Cheng

2016-10-01

Grayscale imbalance correction in real-time phase measuring profilometry (RPMP) is proposed. In the RPMP, the sufficient information is obtained to reconstruct the 3D shape of the measured object in one over twenty-four of a second. Only one color fringe pattern whose R, G and B channels are coded as three sinusoidal phase-shifting gratings with an equivalent shifting phase of 2π/3 is sent to a flash memory on a specialized digital light projector (SDLP). And then the SDLP projects the fringe patterns in R, G and B channels sequentially onto the measured object in one over seventy-two of a second and meanwhile a monochrome CCD camera captures the corresponding deformed patterns synchronously with the SDLP. Because the deformed patterns from three color channels are captured at different time, the color crosstalk is avoided completely. But due to the monochrome CCD camera's different spectral sensitivity to R, G and B tricolor, there will be grayscale imbalance among these deformed patterns captured at R, G and B channels respectively which may result in increasing measuring errors or even failing to reconstruct the 3D shape. So a new grayscale imbalance correction method based on least square method is developed. The experimental results verify the feasibility of the proposed method.

Large size biogas-fed Solid Oxide Fuel Cell power plants with carbon dioxide management: Technical and economic optimization

NASA Astrophysics Data System (ADS)

Curletti, F.; Gandiglio, M.; Lanzini, A.; Santarelli, M.; Maréchal, F.

2015-10-01

This article investigates the techno-economic performance of large integrated biogas Solid Oxide Fuel Cell (SOFC) power plants. Both atmospheric and pressurized operation is analysed with CO2 vented or captured. The SOFC module produces a constant electrical power of 1 MWe. Sensitivity analysis and multi-objective optimization are the mathematical tools used to investigate the effects of Fuel Utilization (FU), SOFC operating temperature and pressure on the plant energy and economic performances. FU is the design variable that most affects the plant performance. Pressurized SOFC with hybridization with a gas turbine provides a notable boost in electrical efficiency. For most of the proposed plant configurations, the electrical efficiency ranges in the interval 50-62% (LHV biogas) when a trade-off of between energy and economic performances is applied based on Pareto charts obtained from multi-objective plant optimization. The hybrid SOFC is potentially able to reach an efficiency above 70% when FU is 90%. Carbon capture entails a penalty of more 10 percentage points in pressurized configurations mainly due to the extra energy burdens of captured CO2 pressurization and oxygen production and for the separate and different handling of the anode and cathode exhausts and power recovery from them.

Endoscopic pulsed digital holography for 3D measurements

NASA Astrophysics Data System (ADS)

Saucedo, A. Tonatiuh; Mendoza Santoyo, Fernando; de La Torre-Ibarra, Manuel; Pedrini, Giancarlo; Osten, Wolfgang

2006-02-01

A rigid endoscope and three different object illumination source positions are used in pulsed digital holography to measure the three orthogonal displacement components from hidden areas of a harmonically vibrating metallic cylinder. In order to obtain simultaneous 3D information from the optical set up, it is necessary to match the optical paths of each of the reference object beam pairs, but to incoherently mismatch the three reference object beam pairs, such that three pulsed digital holograms are incoherently recorded within a single frame of the CCD sensor. The phase difference is obtained using the Fourier method and by subtracting two digital holograms captured for two different object positions.

Reward-associated features capture attention in the absence of awareness: Evidence from object-substitution masking.

PubMed

Harris, Joseph A; Donohue, Sarah E; Schoenfeld, Mircea A; Hopf, Jens-Max; Heinze, Hans-Jochen; Woldorff, Marty G

2016-08-15

Reward-associated visual features have been shown to capture visual attention, evidenced in faster and more accurate behavioral performance, as well as in neural responses reflecting lateralized shifts of visual attention to those features. Specifically, the contralateral N2pc event-related-potential (ERP) component that reflects attentional shifting exhibits increased amplitude in response to task-relevant targets containing a reward-associated feature. In the present study, we examined the automaticity of such reward-association effects using object-substitution masking (OSM) in conjunction with MEG measures of visual attentional shifts. In OSM, a visual-search array is presented, with the target item to be detected indicated by a surrounding mask (here, four surrounding squares). Delaying the offset of the target-surrounding four-dot mask relative to the offset of the rest of the target/distracter array disrupts the viewer's awareness of the target (masked condition), whereas simultaneous offsets do not (unmasked condition). Here we manipulated whether the color of the OSM target was or was not of a previously reward-associated color. By tracking reward-associated enhancements of behavior and the N2pc in response to masked targets containing a previously rewarded or unrewarded feature, the automaticity of attentional capture by reward could be probed. We found an enhanced N2pc response to targets containing a previously reward-associated color feature. Moreover, this enhancement of the N2pc by reward did not differ between masking conditions, nor did it differ as a function of the apparent visibility of the target within the masked condition. Overall, these results underscore the automaticity of attentional capture by reward-associated features, and demonstrate the ability of feature-based reward associations to shape attentional capture and allocation outside of perceptual awareness. Copyright © 2016 Elsevier Inc. All rights reserved.

A likelihood framework for joint estimation of salmon abundance and migratory timing using telemetric mark-recapture

USGS Publications Warehouse

Bromaghin, Jeffrey F.; Gates, Kenneth S.; Palmer, Douglas E.

2010-01-01

Many fisheries for Pacific salmon Oncorhynchus spp. are actively managed to meet escapement goal objectives. In fisheries where the demand for surplus production is high, an extensive assessment program is needed to achieve the opposing objectives of allowing adequate escapement and fully exploiting the available surplus. Knowledge of abundance is a critical element of such assessment programs. Abundance estimation using mark—recapture experiments in combination with telemetry has become common in recent years, particularly within Alaskan river systems. Fish are typically captured and marked in the lower river while migrating in aggregations of individuals from multiple populations. Recapture data are obtained using telemetry receivers that are co-located with abundance assessment projects near spawning areas, which provide large sample sizes and information on population-specific mark rates. When recapture data are obtained from multiple populations, unequal mark rates may reflect a violation of the assumption of homogeneous capture probabilities. A common analytical strategy is to test the hypothesis that mark rates are homogeneous and combine all recapture data if the test is not significant. However, mark rates are often low, and a test of homogeneity may lack sufficient power to detect meaningful differences among populations. In addition, differences among mark rates may provide information that could be exploited during parameter estimation. We present a temporally stratified mark—recapture model that permits capture probabilities and migratory timing through the capture area to vary among strata. Abundance information obtained from a subset of populations after the populations have segregated for spawning is jointly modeled with telemetry distribution data by use of a likelihood function. Maximization of the likelihood produces estimates of the abundance and timing of individual populations migrating through the capture area, thus yielding substantially more information than the total abundance estimate provided by the conventional approach. The utility of the model is illustrated with data for coho salmon O. kisutch from the Kasilof River in south-central Alaska.

Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nils Johnson; Joan Ogden

2010-12-31

In this final report, we describe research results from Phase 2 of a technical/economic study of fossil hydrogen energy systems with carbon dioxide (CO{sub 2}) capture and storage (CCS). CO{sub 2} capture and storage, or alternatively, CO{sub 2} capture and sequestration, involves capturing CO{sub 2} from large point sources and then injecting it into deep underground reservoirs for long-term storage. By preventing CO{sub 2} emissions into the atmosphere, this technology has significant potential to reduce greenhouse gas (GHG) emissions from fossil-based facilities in the power and industrial sectors. Furthermore, the application of CCS to power plants and hydrogen production facilitiesmore » can reduce CO{sub 2} emissions associated with electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs) and, thus, can also improve GHG emissions in the transportation sector. This research specifically examines strategies for transitioning to large-scale coal-derived energy systems with CCS for both hydrogen fuel production and electricity generation. A particular emphasis is on the development of spatially-explicit modeling tools for examining how these energy systems might develop in real geographic regions. We employ an integrated modeling approach that addresses all infrastructure components involved in the transition to these energy systems. The overall objective is to better understand the system design issues and economics associated with the widespread deployment of hydrogen and CCS infrastructure in real regions. Specific objectives of this research are to: Develop improved techno-economic models for all components required for the deployment of both hydrogen and CCS infrastructure, Develop novel modeling methods that combine detailed spatial data with optimization tools to explore spatially-explicit transition strategies, Conduct regional case studies to explore how these energy systems might develop in different regions of the United States, and Examine how the design and cost of coal-based H{sub 2} and CCS infrastructure depend on geography and location.« less

The role of magnocellular signals in oculomotor attentional capture

PubMed Central

Leonard, Carly J.; Luck, Steven J.

2011-01-01

While it is known that salient distractors often capture covert and overt attention, it is unclear whether salience signals that stem from magnocellular visual input have a more dominant role in oculomotor capture than those that result from parvocellular input. Because of the direct anatomical connections between the magnocellular pathway and the superior colliculus, salience signals generated from the magnocellular pathway may produce greater oculomotor capture than those from the parvocellular pathway, which could be potentially harder to overcome with “top-down”, goal-directed guidance. Although previous research has addressed this with regard to magnocellular transients, in the current research we investigated whether a static singleton distractor defined along a dimension visible to the magnocellular pathway would also produce enhanced oculomotor capture. In two experiments, we addressed this possibility by comparing a parvo-biased singleton condition, in which the distractor was defined by isoluminant chromatic color contrast, with a magno+parvo singleton condition, in which the distractor also differed in luminance from the surrounding objects. In both experiments, magno+parvo singletons elicited faster eye movements than parvo-only singletons, presumably reflecting faster information transmission in the magnocellular pathway, but magno+parvo singletons were not significantly more likely to produce oculomotor capture. Thus, although magnocellular salience signals are available more rapidly, they have no sizable advantage over parvocellular salience signals in controlling oculomotor orienting when all stimuli have a common onset. PMID:22076486

Video Image Tracking Engine

NASA Technical Reports Server (NTRS)

Howard, Richard T. (Inventor); Bryan, ThomasC. (Inventor); Book, Michael L. (Inventor)

2004-01-01

A method and system for processing an image including capturing an image and storing the image as image pixel data. Each image pixel datum is stored in a respective memory location having a corresponding address. Threshold pixel data is selected from the image pixel data and linear spot segments are identified from the threshold pixel data selected.. Ihe positions of only a first pixel and a last pixel for each linear segment are saved. Movement of one or more objects are tracked by comparing the positions of fust and last pixels of a linear segment present in the captured image with respective first and last pixel positions in subsequent captured images. Alternatively, additional data for each linear data segment is saved such as sum of pixels and the weighted sum of pixels i.e., each threshold pixel value is multiplied by that pixel's x-location).

Developing a Cyberinfrastructure for integrated assessments of environmental contaminants.

PubMed

Kaur, Taranjit; Singh, Jatinder; Goodale, Wing M; Kramar, David; Nelson, Peter

2005-03-01

The objective of this study was to design and implement prototype software for capturing field data and automating the process for reporting and analyzing the distribution of mercury. The four phase process used to design, develop, deploy and evaluate the prototype software is described. Two different development strategies were used: (1) design of a mobile data collection application intended to capture field data in a meaningful format and automate transfer into user databases, followed by (2) a re-engineering of the original software to develop an integrated database environment with improved methods for aggregating and sharing data. Results demonstrated that innovative use of commercially available hardware and software components can lead to the development of an end-to-end digital cyberinfrastructure that captures, records, stores, transmits, compiles and integrates multi-source data as it relates to mercury.

Examining techniques for measuring the effects of nutrients on mental performance and mood state.

PubMed

Hamer, Mark; Dye, Louise; Siobhan Mitchell, E; Layé, Sophie; Saunders, Caroline; Boyle, Neil; Schuermans, Jeroen; Sijben, John

2016-09-01

Intake of specific nutrients has been linked to mental states and various indices of cognitive performance although the effects are often subtle and difficult to interpret. Measurement of so-called objective variables (e.g. reaction times) is often considered to be the gold standard for assessing outcomes in this field of research. It can, however, be argued that data on subjective experience (e.g. mood) are also important and may enrich existing objective data. The aim of this review is to evaluate methods for measuring mental performance and mood, considering the definition of subjective mood and the validity of measures of subjective experience. A multi-stakeholder expert group was invited by ILSI Europe to come to a consensus around the utility of objective and subjective measurement in this field, which forms the basis of the paper. Therefore, the present review reflects a succinct overview of the science but is not intended to be a systematic review. The proposed approach extends the traditional methodology using standard 'objective' measurements to also include the consumers' subjective experiences in relation to food. Specific recommendations include 1) using contemporary methods to capture transient mood states; 2) using sufficiently sensitive measures to capture effects of nutritional intervention; 3) considering the possibility that subjective and objective responses will occur over different time frames; and 4) recognition of the importance of expectancy and placebo effects for subjective measures. The consensus reached was that the most informative approach should involve collection and consideration of both objective and subjective data.

Flyby of large-size space debris objects and their transition to the disposal orbits in LEO

NASA Astrophysics Data System (ADS)

Baranov, Andrey A.; Grishko, Dmitriy A.; Razoumny, Yury N.; Jun, Li

2017-06-01

The article focuses on the flyby issue involving large-size space debris (LSSD) objects in low Earth orbits. The data on overall sizes of the known upper-stages and last stages of launch-vehicles make it possible to emphasize five compact groups of such objects from the Satellite catalogue in 600-2000 km altitude interval. The flyby maneuvers are executed by a single space vehicle (SV) that transfers the current captured LSSD object to the specially selected circular or elliptical disposal orbit (DO) and after a period of time returns to capture a new one. The flight is always realized when a value of the Right Ascension of the Ascending Node (RAAN) is approximately the same for the current DO and for an orbit of the following LSSD object. Distinctive features of changes in mutual distribution of orbital planes of LSSD within a group are shown on the RAAN deviations' evolution portrait. In case of the first three groups (inclinations 71°, 74° and 81°), the lines describing the relative orientation of orbital planes are quasi-parallel. Such configuration allows easy identification of the flyby order within a group, and calculation of the mission duration and the required total ΔV. In case of the 4th and the 5th groups the RAAN deviations' evolution portrait represents a conjunction of lines chaotically intersecting. The article studies changes in mission duration and in the required ΔV depending on the catalogue number of the first object in the flyby order. The article also contains a comparative efficiency analysis of the two world-wide known schemes applicable to LSSD objects' de-orbiting; the analysis is carried out for all 5 distinguished LSSD groups.

Phase III gross solids removal devices pilot study, 2002-2005.

DOT National Transportation Integrated Search

2005-12-01

The objective of the Phase III Gross Solids Removal Devices (GSRDs) Pilot study was to : evaluate the performance of non-proprietary devices that can capture gross solids and that can be : incorporated into existing highway drainage systems or implem...

Analysis and Perspective from the Complex Aerospace Systems Exchange (CASE) 2013

NASA Technical Reports Server (NTRS)

Jones, Kennie H.; Parker, Peter A.; Detweiler, Kurt N.; McGowan, Anna-Maria R.; Dress, David A.; Kimmel, William M.

2014-01-01

NASA Langley Research Center embedded four rapporteurs at the Complex Aerospace Systems Exchange (CASE) held in August 2013 with the objective to capture the essence of the conference presentations and discussions. CASE was established to provide a discussion forum among chief engineers, program managers, and systems engineers on challenges in the engineering of complex aerospace systems. The meeting consists of invited presentations and panels from industry, academia, and government followed by discussions among attendees. This report presents the major and reoccurring themes captured throughout the meeting and provides analysis and insights to further the CASE mission.

Space Shuttle Projects

NASA Image and Video Library

1992-05-14

STS-49, the first flight of the Space Shuttle Orbiter Endeavour, lifted off from launch pad 39B on May 7, 1992 at 6:40 pm CDT. The STS-49 mission was the first U.S. orbital flight to feature 4 extravehicular activities (EVAs), and the first flight to involve 3 crew members working simultaneously outside of the spacecraft. The primary objective was the capture and redeployment of the INTELSAT VI (F-3), a communication satellite for the International Telecommunication Satellite organization, which was stranded in an unusable orbit since its launch aboard the Titan rocket in March 1990. This onboard photo captures the free flying INTELSAT IV.

Nosology, ontology and promiscuous realism.

PubMed

Binney, Nicholas

2015-06-01

Medics may consider worrying about their metaphysics and ontology to be a waste of time. I will argue here that this is not the case. Promiscuous realism is a metaphysical position which holds that multiple, equally valid, classification schemes should be applied to objects (such as patients) to capture different aspects of their complex and heterogeneous nature. As medics at the bedside may need to capture different aspects of their patients' problems, they may need to use multiple classification schemes (multiple nosologies), and thus consider adopting a different metaphysics to the one commonly in use. © 2014 John Wiley & Sons, Ltd.

Image formation of thick three-dimensional objects in differential-interference-contrast microscopy.

PubMed

Trattner, Sigal; Kashdan, Eugene; Feigin, Micha; Sochen, Nir

2014-05-01

The differential-interference-contrast (DIC) microscope is of widespread use in life sciences as it enables noninvasive visualization of transparent objects. The goal of this work is to model the image formation process of thick three-dimensional objects in DIC microscopy. The model is based on the principles of electromagnetic wave propagation and scattering. It simulates light propagation through the components of the DIC microscope to the image plane using a combined geometrical and physical optics approach and replicates the DIC image of the illuminated object. The model is evaluated by comparing simulated images of three-dimensional spherical objects with the recorded images of polystyrene microspheres. Our computer simulations confirm that the model captures the major DIC image characteristics of the simulated object, and it is sensitive to the defocusing effects.

Capturing Fine Details Involving Low-Cost Sensors -a Comparative Study

NASA Astrophysics Data System (ADS)

Rehany, N.; Barsi, A.; Lovas, T.

2017-11-01

Capturing the fine details on the surface of small objects is a real challenge to many conventional surveying methods. Our paper discusses the investigation of several data acquisition technologies, such as arm scanner, structured light scanner, terrestrial laser scanner, object line-scanner, DSLR camera, and mobile phone camera. A palm-sized embossed sculpture reproduction was used as a test object; it has been surveyed by all the instruments. The result point clouds and meshes were then analyzed, using the arm scanner's dataset as reference. In addition to general statistics, the results have been evaluated based both on 3D deviation maps and 2D deviation graphs; the latter allows even more accurate analysis of the characteristics of the different data acquisition approaches. Additionally, own-developed local minimum maps were created that nicely visualize the potential level of detail provided by the applied technologies. Besides the usual geometric assessment, the paper discusses the different resource needs (cost, time, expertise) of the discussed techniques. Our results proved that even amateur sensors operated by amateur users can provide high quality datasets that enable engineering analysis. Based on the results, the paper contains an outlook to potential future investigations in this field.

Camouflage, detection and identification of moving targets

PubMed Central

Hall, Joanna R.; Cuthill, Innes C.; Baddeley, Roland; Shohet, Adam J.; Scott-Samuel, Nicholas E.

2013-01-01

Nearly all research on camouflage has investigated its effectiveness for concealing stationary objects. However, animals have to move, and patterns that only work when the subject is static will heavily constrain behaviour. We investigated the effects of different camouflages on the three stages of predation—detection, identification and capture—in a computer-based task with humans. An initial experiment tested seven camouflage strategies on static stimuli. In line with previous literature, background-matching and disruptive patterns were found to be most successful. Experiment 2 showed that if stimuli move, an isolated moving object on a stationary background cannot avoid detection or capture regardless of the type of camouflage. Experiment 3 used an identification task and showed that while camouflage is unable to slow detection or capture, camouflaged targets are harder to identify than uncamouflaged targets when similar background objects are present. The specific details of the camouflage patterns have little impact on this effect. If one has to move, camouflage cannot impede detection; but if one is surrounded by similar targets (e.g. other animals in a herd, or moving background distractors), then camouflage can slow identification. Despite previous assumptions, motion does not entirely ‘break’ camouflage. PMID:23486439

Small asteroids temporarily captured in the Earth-Moon system

NASA Astrophysics Data System (ADS)

Jedicke, Robert; Bolin, Bryce; Bottke, William F.; Chyba, Monique; Fedorets, Grigori; Granvik, Mikael; Patterson, Geoff

2016-01-01

We present an update on our work on understanding the population of natural objects that are temporarily captured in the Earth-Moon system like the 2-3 meter diameter, 2006 RH120, that was discovered by the Catalina Sky Survey. We use the term `minimoon' to refer to objects that are gravitationally bound to the Earth-Moon system, make at least one revolution around the barycenter in a co-rotating frame relative to the Earth-Sun axis, and are within 3 Earth Hill-sphere radii. There are one or two 1 to 2 meter diameter minimoons in the steady state population at any time, and about a dozen larger than 50 cm diameter. `Drifters' are also bound to the Earth-Moon system but make less than one revolution about the barycenter. The combined population of minimoons and drifters provide a new opportunity for scientific exploration of small asteroids and testing concepts for in-situ resource utilization. These objects provide interesting challenges for rendezvous missions because of their limited lifetime and complicated trajectories. Furthermore, they are difficult to detect because they are small, available for a limited time period, and move quickly across the sky.

Small asteroids temporarily captured in the Earth-Moon system

NASA Astrophysics Data System (ADS)

Jedicke, Robert; Bolin, Bryce; Bottke, William F.; Chyba, Monique; Fedorets, Grigori; Granvik, Mikael; Patterson, Geoff

2015-08-01

We will present an update on our work on understanding the population of natural objects that are temporarily captured in the Earth-Moon system, such as the 2-3 meter diameter 2006 RH120 that was discovered by the Catalina Sky Survey. We use the term 'minimoon' to refer to objects that are gravitationally bound to the Earth-Moon system, make at least one revolution around the barycenter in a co-rotating frame relative to the Earth-Sun axis, and are within 3 Earth Hill-sphere radii. There are one or two 1 to 2 meter diameter minimoons in the steady state population at any time, and about a dozen larger than 50 cm diameter. `Drifters' are also bound to the Earth-Moon system but make less than one revolution about the barycenter. The combined population of minimoons and drifters provide a new opportunity for scientific exploration of small asteroids and testing concepts for in-situ resource utilization. These objects provide interesting challenges for rendezvous missions because of their limited lifetime and complicated trajectories. Furthermore, they are difficult to detect because they are small, available for a limited time period, and move quickly across the sky.

Principles of water capture, evaporation, and soil water retention

USDA-ARS?s Scientific Manuscript database

Successful dryland crop production in semiarid environments is dependent upon efficient storage of precipitation and use of stored soil water supplies. The objectives of this presentation are to: 1. Summarize information regarding the effects of time of year; environmental parameters; residue orient...

Particle size related bacterial recovery in immunomagnetic separation

USDA-ARS?s Scientific Manuscript database

Magnetic nanoparticles (MNPs) have demonstrated superior capture efficiencies in small molecule targets during immunomagnetic separation (IMS), but the potentials of MNPs in bacterial isolation have not been verified. The objective of this study was to evaluate the effect of magnetic particle size o...

"JOB SEEKER"(Job Shadowing for Employee Engagement through Knowledge and Experience Retention).

DOT National Transportation Integrated Search

2016-05-01

The main objective of this study was to explore how to optimally use the particular knowledge : retention/transfer technique of job shadowing as an informal method for knowledge capture and : transfer as well as increasing communication and emp...

Phase IV gross solids removal devices pilot study, 2004-2005.

DOT National Transportation Integrated Search

2005-12-01

The objective of the Phase IV Gross Solids Removal Device (GSRD) Pilot study was to evaluate : the performance of one non-proprietary device that can capture gross solids and that can be : incorporated into existing highway drainage systems or implem...

Micro-optical system based 3D imaging for full HD depth image capturing

NASA Astrophysics Data System (ADS)

Park, Yong-Hwa; Cho, Yong-Chul; You, Jang-Woo; Park, Chang-Young; Yoon, Heesun; Lee, Sang-Hun; Kwon, Jong-Oh; Lee, Seung-Wan

2012-03-01

20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical shutter'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation. The optical shutter device is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image. Suggested novel optical shutter device enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously. The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical shutter design, fabrication, characterization, 3D camera system prototype and image test results.

Under-reporting of road traffic mortality in developing countries: application of a capture-recapture statistical model to refine mortality estimates.

PubMed

Samuel, Jonathan C; Sankhulani, Edward; Qureshi, Javeria S; Baloyi, Paul; Thupi, Charles; Lee, Clara N; Miller, William C; Cairns, Bruce A; Charles, Anthony G

2012-01-01

Road traffic injuries are a major cause of preventable death in sub-Saharan Africa. Accurate epidemiologic data are scarce and under-reporting from primary data sources is common. Our objectives were to estimate the incidence of road traffic deaths in Malawi using capture-recapture statistical analysis and determine what future efforts will best improve upon this estimate. Our capture-recapture model combined primary data from both police and hospital-based registries over a one year period (July 2008 to June 2009). The mortality incidences from the primary data sources were 0.075 and 0.051 deaths/1000 person-years, respectively. Using capture-recapture analysis, the combined incidence of road traffic deaths ranged 0.192-0.209 deaths/1000 person-years. Additionally, police data were more likely to include victims who were male, drivers or pedestrians, and victims from incidents with greater than one vehicle involved. We concluded that capture-recapture analysis is a good tool to estimate the incidence of road traffic deaths, and that capture-recapture analysis overcomes limitations of incomplete data sources. The World Health Organization estimated incidence of road traffic deaths for Malawi utilizing a binomial regression model and survey data and found a similar estimate despite strikingly different methods, suggesting both approaches are valid. Further research should seek to improve capture-recapture data through utilization of more than two data sources and improving accuracy of matches by minimizing missing data, application of geographic information systems, and use of names and civil registration numbers if available.

Under-Reporting of Road Traffic Mortality in Developing Countries: Application of a Capture-Recapture Statistical Model to Refine Mortality Estimates

PubMed Central

Samuel, Jonathan C.; Sankhulani, Edward; Qureshi, Javeria S.; Baloyi, Paul; Thupi, Charles; Lee, Clara N.; Miller, William C.; Cairns, Bruce A.; Charles, Anthony G.

2012-01-01

Road traffic injuries are a major cause of preventable death in sub-Saharan Africa. Accurate epidemiologic data are scarce and under-reporting from primary data sources is common. Our objectives were to estimate the incidence of road traffic deaths in Malawi using capture-recapture statistical analysis and determine what future efforts will best improve upon this estimate. Our capture-recapture model combined primary data from both police and hospital-based registries over a one year period (July 2008 to June 2009). The mortality incidences from the primary data sources were 0.075 and 0.051 deaths/1000 person-years, respectively. Using capture-recapture analysis, the combined incidence of road traffic deaths ranged 0.192–0.209 deaths/1000 person-years. Additionally, police data were more likely to include victims who were male, drivers or pedestrians, and victims from incidents with greater than one vehicle involved. We concluded that capture-recapture analysis is a good tool to estimate the incidence of road traffic deaths, and that capture-recapture analysis overcomes limitations of incomplete data sources. The World Health Organization estimated incidence of road traffic deaths for Malawi utilizing a binomial regression model and survey data and found a similar estimate despite strikingly different methods, suggesting both approaches are valid. Further research should seek to improve capture-recapture data through utilization of more than two data sources and improving accuracy of matches by minimizing missing data, application of geographic information systems, and use of names and civil registration numbers if available. PMID:22355338

Gas-drag-assisted capture of Himalia's family

NASA Astrophysics Data System (ADS)

Ćuk, Matija; Burns, Joseph A.

2004-02-01

To elucidate the capture of Jupiter's outer moons, we reverse-evolve satellites from their present orbits to their original heliocentric paths in the presence of Jupiter's primordial circumplanetary disk (Lubow et al., 1999, Astrophys. J. 526, 1001-1012; Canup and Ward, 2003, Astron. J. 124, 3404-3423). Our orbital histories use a symplectic integrator that allows dissipation. We assume that the present satellites Himalia, Elara, Lysithea, Leda, and S/2000 J11 are collisional fragments of a single parent. Our simulations show that this "prograde-cluster progenitor" (PCP) could be derived from objects with heliocentric orbits like those of the Hilda asteroid group. We show analytically that this capture is energetically possible. We also compare the spectroscopic characteristics of the prograde cluster members (Grav et al., 2003, Icarus, submitted for publication) with those of the Hildas, and conclude that the surface color of the prograde-cluster progenitor is consistent with an origin within the Hilda group. Accordingly, gas drag in the primordial jovian nebula is found to offer a plausible explanation for the origin of the prograde cluster. A similar capture mechanism is proposed for Saturn's Phoebe.

Spatial and temporal variation in efficiency of the Moore egg collector

USGS Publications Warehouse

Worthington, Thomas A.; Brewer, Shannon K.; Farless, Nicole

2013-01-01

The Moore egg collector (MEC) was developed for quantitative and nondestructive capture of semibuoyant fish eggs. Previous studies have indicated that capture efficiency of the MEC was low and the use of one device did not adequately represent the spatial distribution within the water column of egg surrogates (gellan beads) of pelagic broadcast-spawning cyprinids. The objective of this study was to assess whether use of multiple MECs showed differences in spatial and temporal distribution of bead catches. Capture efficiency of three MECs was tested at four 500-m sites on the South Canadian River, a Great Plains river in Oklahoma. For each trial, approximately 100,000 beads were released and mean capture efficiency was 0.47–2.16%. Kolmogorov–Smirnov tests indicated the spatial distributions of bead catches were different among multiple MECs at three of four sites. Temporal variability in timing of peak catches of gellan beads was also evident between MECs. We concluded that the use of multiple MECs is necessary to properly sample eggs of pelagic broadcast-spawning cyprinids.

Knowledge of healthcare professionals about rights of patient’s images

PubMed Central

Caires, Bianca Rodrigues; Lopes, Maria Carolina Barbosa Teixeira; Okuno, Meiry Fernanda Pinto; Vancini-Campanharo, Cássia Regina; Batista, Ruth Ester Assayag

2015-01-01

Objective To assess knowledge of healthcare professionals about capture and reproduction of images of patients in a hospital setting. Methods A cross-sectional and observational study among 360 healthcare professionals (nursing staff, physical therapists, and physicians), working at a teaching hospital in the city of São Paulo (SP). A questionnaire with sociodemographic information was distributed and data were correlated to capture and reproduction of images at hospitals. Results Of the 360 respondents, 142 had captured images of patients in the last year, and 312 reported seeing other professionals taking photographs of patients. Of the participants who captured images, 61 said they used them for studies and presentation of clinical cases, and 168 professionals reported not knowing of any legislation in the Brazilian Penal Code regarding collection and use of images. Conclusion There is a gap in the training of healthcare professionals regarding the use of patient´s images. It is necessary to include subjects that address this theme in the syllabus of undergraduate courses, and the healthcare organizations should regulate this issue. PMID:26267838

Visual Object Recognition with 3D-Aware Features in KITTI Urban Scenes

PubMed Central

Yebes, J. Javier; Bergasa, Luis M.; García-Garrido, Miguel Ángel

2015-01-01

Driver assistance systems and autonomous robotics rely on the deployment of several sensors for environment perception. Compared to LiDAR systems, the inexpensive vision sensors can capture the 3D scene as perceived by a driver in terms of appearance and depth cues. Indeed, providing 3D image understanding capabilities to vehicles is an essential target in order to infer scene semantics in urban environments. One of the challenges that arises from the navigation task in naturalistic urban scenarios is the detection of road participants (e.g., cyclists, pedestrians and vehicles). In this regard, this paper tackles the detection and orientation estimation of cars, pedestrians and cyclists, employing the challenging and naturalistic KITTI images. This work proposes 3D-aware features computed from stereo color images in order to capture the appearance and depth peculiarities of the objects in road scenes. The successful part-based object detector, known as DPM, is extended to learn richer models from the 2.5D data (color and disparity), while also carrying out a detailed analysis of the training pipeline. A large set of experiments evaluate the proposals, and the best performing approach is ranked on the KITTI website. Indeed, this is the first work that reports results with stereo data for the KITTI object challenge, achieving increased detection ratios for the classes car and cyclist compared to a baseline DPM. PMID:25903553

Visual Object Recognition with 3D-Aware Features in KITTI Urban Scenes.

PubMed

Yebes, J Javier; Bergasa, Luis M; García-Garrido, Miguel Ángel

2015-04-20

Driver assistance systems and autonomous robotics rely on the deployment of several sensors for environment perception. Compared to LiDAR systems, the inexpensive vision sensors can capture the 3D scene as perceived by a driver in terms of appearance and depth cues. Indeed, providing 3D image understanding capabilities to vehicles is an essential target in order to infer scene semantics in urban environments. One of the challenges that arises from the navigation task in naturalistic urban scenarios is the detection of road participants (e.g., cyclists, pedestrians and vehicles). In this regard, this paper tackles the detection and orientation estimation of cars, pedestrians and cyclists, employing the challenging and naturalistic KITTI images. This work proposes 3D-aware features computed from stereo color images in order to capture the appearance and depth peculiarities of the objects in road scenes. The successful part-based object detector, known as DPM, is extended to learn richer models from the 2.5D data (color and disparity), while also carrying out a detailed analysis of the training pipeline. A large set of experiments evaluate the proposals, and the best performing approach is ranked on the KITTI website. Indeed, this is the first work that reports results with stereo data for the KITTI object challenge, achieving increased detection ratios for the classes car and cyclist compared to a baseline DPM.

X-ray coherent scattering tomography of textured material (Conference Presentation)

NASA Astrophysics Data System (ADS)

Zhu, Zheyuan; Pang, Shuo

2017-05-01

Small-angle X-ray scattering (SAXS) measures the signature of angular-dependent coherently scattered X-rays, which contains richer information in material composition and structure compared to conventional absorption-based computed tomography. SAXS image reconstruction method of a 2 or 3 dimensional object based on computed tomography, termed as coherent scattering computed tomography (CSCT), enables the detection of spatially-resolved, material-specific isotropic scattering signature inside an extended object, and provides improved contrast for medical diagnosis, security screening, and material characterization applications. However, traditional CSCT methods assumes materials are fine powders or amorphous, and possess isotropic scattering profiles, which is not generally true for all materials. Anisotropic scatters cannot be captured using conventional CSCT method and result in reconstruction errors. To obtain correct information from the sample, we designed new imaging strategy which incorporates extra degree of detector motion into X-ray scattering tomography for the detection of anisotropic scattered photons from a series of two-dimensional intensity measurements. Using a table-top, narrow-band X-ray source and a panel detector, we demonstrate the anisotropic scattering profile captured from an extended object and the reconstruction of a three-dimensional object. For materials possessing a well-organized crystalline structure with certain symmetry, the scatter texture is more predictable. We will also discuss the compressive schemes and implementation of data acquisition to improve the collection efficiency and accelerate the imaging process.

Preliminary study of Malaysian fruit bats species diversity in Lenggong Livestock Breeding Center, Perak: Potential risk of spill over infection

PubMed Central

Mikail, Muhammed; Putra, T. A. Tengku Rinalfi; Suri, Arshad Siti; Hezmee, Mohd Noor Mohd; Marina, M. T.

2017-01-01

Aim: Farms that are neighboring wildlife sanctuaries are at risk of spillover infection from wildlife, and the objective of this research is to examine the species diversity of Malaysian fruit bats in livestock farm in determining the possible risk of spill over infection to livestock. Materials and Methods: Fifty individual fruit bats were captured using six mists net, from May to July 2017. The nets were set at dusk (1830 h) as bats emerge for foraging and monitored at every 30-min intervals throughout the night until dawn when they returned to the roost. The nets were closed for the day until next night, and captured bats were identified to species levels. Results: All the captured bats were mega chiropterans, and Cynopterus brachyotis was the highest captured species, representing 40% of the total capture. Shannon–Weiner index is 2.80, and Simpson index is 0.2. Our result suggests that there is a degree of species dominance with low diversity in Lenggong Livestock Breeding Center. Conclusion: We concluded that fruit bats are indeed, encroaching livestock areas and the species identified could be a potential source of infection to susceptible livestock. Hence, an active surveillance should be embarked on farms that border wildlife sanctuaries. PMID:29263588

EDOS Data Capture for ALOS

NASA Technical Reports Server (NTRS)

McLemore, Bruce; Cordier, Guy R.; Wood, Terri; Gamst, Harek

2012-01-01

In 2008, NASA's Earth Sciences Missions Operations (ESMO) at Goddard Space Flight Center (GSFC) directed the Earth Observing System Data Operations System (EDOS) project to provide a prototype system to assess the feasibility of high rate data capture for the Japan Aerospace Exploration Agency's (JAXA) Advanced Land Observing Satellite (ALOS) spacecraft via NASA's Tracking and Data Relay Satellite System (TDRSS). The key objective of this collaborative effort between NASA and JAXA was to share science data collected over North and South America previously unavailable due to limitations in ALOS downlink capacity. EDOS provided a single system proof-of-concept in 4 months at White Sands TDRS Ground Terminal The system captured 6 ALOS events error-free at 277 Mbps and delivered the data to the Alaska Satellite Facility (ASF) within 3 hours (May/June '08). This paper describes the successful rapid prototyping approach which led to a successful demonstration and agreement between NASA and JAXA for operational support. The design of the operational system will be discussed with emphasis on concurrent high-rate data capture, Level-O processing, real-time display and high-rate delivery with stringent latency requirements. A similar solution was successfully deployed at Svalbard, Norway to support the Suomi NPP launch (October 2011) and capture all X-band data and provide a 30-day backup archive.

Using the Logarithm of Odds to Define a Vector Space on Probabilistic Atlases

PubMed Central

Pohl, Kilian M.; Fisher, John; Bouix, Sylvain; Shenton, Martha; McCarley, Robert W.; Grimson, W. Eric L.; Kikinis, Ron; Wells, William M.

2007-01-01

The Logarithm of the Odds ratio (LogOdds) is frequently used in areas such as artificial neural networks, economics, and biology, as an alternative representation of probabilities. Here, we use LogOdds to place probabilistic atlases in a linear vector space. This representation has several useful properties for medical imaging. For example, it not only encodes the shape of multiple anatomical structures but also captures some information concerning uncertainty. We demonstrate that the resulting vector space operations of addition and scalar multiplication have natural probabilistic interpretations. We discuss several examples for placing label maps into the space of LogOdds. First, we relate signed distance maps, a widely used implicit shape representation, to LogOdds and compare it to an alternative that is based on smoothing by spatial Gaussians. We find that the LogOdds approach better preserves shapes in a complex multiple object setting. In the second example, we capture the uncertainty of boundary locations by mapping multiple label maps of the same object into the LogOdds space. Third, we define a framework for non-convex interpolations among atlases that capture different time points in the aging process of a population. We evaluate the accuracy of our representation by generating a deformable shape atlas that captures the variations of anatomical shapes across a population. The deformable atlas is the result of a principal component analysis within the LogOdds space. This atlas is integrated into an existing segmentation approach for MR images. We compare the performance of the resulting implementation in segmenting 20 test cases to a similar approach that uses a more standard shape model that is based on signed distance maps. On this data set, the Bayesian classification model with our new representation outperformed the other approaches in segmenting subcortical structures. PMID:17698403

All I saw was the cake. Hunger effects on attentional capture by visual food cues.

PubMed

Piech, Richard M; Pastorino, Michael T; Zald, David H

2010-06-01

While effects of hunger on motivation and food reward value are well-established, far less is known about the effects of hunger on cognitive processes. Here, we deployed the emotional blink of attention paradigm to investigate the impact of visual food cues on attentional capture under conditions of hunger and satiety. Participants were asked to detect targets which appeared in a rapid visual stream after different types of task irrelevant distractors. We observed that food stimuli acquired increased power to capture attention and prevent target detection when participants were hungry. This occurred despite monetary incentives to perform well. Our findings suggest an attentional mechanism through which hunger heightens perception of food cues. As an objective behavioral marker of the attentional sensitivity to food cues, the emotional attentional blink paradigm may provide a useful technique for studying individual differences, and state manipulations in the sensitivity to food cues. Published by Elsevier Ltd.

Pilot project at Hazira, India, for capture of carbon dioxide and its biofixation using microalgae.

PubMed

Yadav, Anant; Choudhary, Piyush; Atri, Neelam; Teir, Sebastian; Mutnuri, Srikanth

2016-11-01

The objective of the present study was to set up a small-scale pilot reactor at ONGC Hazira, Surat, for capturing CO 2 from vent gas. The studies were carried out for CO 2 capture by either using microalgae Chlorella sp. or a consortium of microalgae (Scenedesmus quadricauda, Chlorella vulgaris and Chlorococcum humicola). The biomass harvested was used for anaerobic digestion to produce biogas. The carbonation column was able to decrease the average 34 vol.% of CO 2 in vent gas to 15 vol.% of CO 2 in the outlet gas of the carbonation column. The yield of Chlorella sp. was found to be 18 g/m 2 /day. The methane yield was 386 l CH 4 /kg VS fed of Chlorella sp. whereas 228 l CH 4 /kg VS fed of the consortium of algae.

Hydrodynamic capture of microswimmers into sphere-bound orbits.

PubMed

Takagi, Daisuke; Palacci, Jérémie; Braunschweig, Adam B; Shelley, Michael J; Zhang, Jun

2014-03-21

Self-propelled particles can exhibit surprising non-equilibrium behaviors, and how they interact with obstacles or boundaries remains an important open problem. Here we show that chemically propelled micro-rods can be captured, with little change in their speed, into close orbits around solid spheres resting on or near a horizontal plane. We show that this interaction between sphere and particle is short-range, occurring even for spheres smaller than the particle length, and for a variety of sphere materials. We consider a simple model, based on lubrication theory, of a force- and torque-free swimmer driven by a surface slip (the phoretic propulsion mechanism) and moving near a solid surface. The model demonstrates capture, or movement towards the surface, and yields speeds independent of distance. This study reveals the crucial aspects of activity–driven interactions of self-propelled particles with passive objects, and brings into question the use of colloidal tracers as probes of active matter.

Thermally and chemically responsive nanoporous materials for efficient capture of fission product gases.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroeve, Pieter; Faller, Roland

The objective of this project was to develop robust, high-efficiency materials for capture of fission product gases such as He, Xe and Kr in scenarios relevant for both reactor fuels and reprocessing operations. The relevant environments are extremely harsh, encompassing temperatures up to 1500 °C, high levels of radiation, as well as potential exposures to highly-reactive chemicals such as nitric acid and organic solvents such as kerosene. The requirement for nanostructured capture materials is driven in part by the very short (few micron) diffusion distances for product gases in nuclear fuel. We achieved synthesis, characterization and detailed modeling of themore » materials. Although not all materials reviewed in this report will be feasible for the ultimate goal of integration in nuclear fuel, nevertheless each material studied has particular properties which will enable an optimized material to be efficiently developed and characterized.« less

Competent Systems: Effective, Efficient, Deliverable.

ERIC Educational Resources Information Center

Abramson, Bruce

Recent developments in artificial intelligence and decision analysis suggest reassessing the approaches commonly taken to the design of knowledge-based systems. Competent systems are based on models known as influence diagrams, which graphically capture a domain's basic objects and their interrelationships. Among the benefits offered by influence…

Modeling energy expenditure in children and adolescents using quantile regression

USDA-ARS?s Scientific Manuscript database

Advanced mathematical models have the potential to capture the complex metabolic and physiological processes that result in energy expenditure (EE). Study objective is to apply quantile regression (QR) to predict EE and determine quantile-dependent variation in covariate effects in nonobese and obes...

Galactic Dust Bunnies Found to Contain Carbon After All

NASA Image and Video Library

2009-03-12

NASA’s Spitzer Space Telescope captured the Cat’s Eye nebula, or NGC 6543, is a well-studied example of a planetary nebula. Such objects are the glowing remnants of dust and gas expelled from moderate-sized stars during their last stages of life.

The capture of attention by entirely irrelevant pictures of calorie-dense foods.

PubMed

Cunningham, Corbin A; Egeth, Howard E

2018-04-01

Inborn preference for palatable energy-dense food is thought to be an evolutionary adaptation. One way this preference manifests itself is through the control of visual attention. In the present study, we investigated how attentional capture is influenced by changes in naturally occurring goal-states, in this case desire for energy-dense foods (typically high fat and/or high sugar). We demonstrate that even when distractors are entirely irrelevant, participants were significantly more distracted by energy-dense foods compared with non-food objects and even low-energy foods. Additionally, we show the lability of these goal-states by having a separate set of participants consume a small amount of calorie-dense food prior to the task. The amount of distraction by the energy-dense food images in this case was significantly reduced and no different than distraction by images of low-energy foods and images of non-food objects. While naturally occurring goal-states can be difficult to ignore, they also are highly flexible.

Mercury retention by fly ashes from coal combustion: Influence of the unburned carbon content

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez-Anton, M.A.; Diaz-Somoano, M.; Martinez-Tarazona, M.R.

2007-01-31

The objective of this study was to evaluate the effect of unburned carbon particles present in fly ashes produced by coal combustion on mercury retention. To achieve this objective, the work was divided into two parts. The aim of the first part of the study was to estimate the amount of mercury captured by the fly ashes during combustion in power stations and the relationship of this retention to the unburned carbon content. The second part was a laboratory-scale study aimed at evaluating the retention of mercury concentrations greater than those produced in power stations by fly ashes of differentmore » characteristics and by unburned carbon particles. From the results obtained it can be inferred that the unburned carbon content is not the only variable that controls mercury capture in fly ashes. The textural characteristics of these unburned particles and of other components of fly ashes also influence retention.« less

Features of spillover networks in international financial markets: Evidence from the G20 countries

NASA Astrophysics Data System (ADS)

Liu, Xueyong; An, Haizhong; Li, Huajiao; Chen, Zhihua; Feng, Sida; Wen, Shaobo

2017-08-01

The objective of this study is to investigate volatility spillover transmission systematically in stock markets across the G20 countries. To achieve this objective, we combined GARCH-BEKK model with complex network theory using the linkages of spillovers. GARCH-BEKK model was used to capture volatility spillover between stock markets. Then, an information spillover network was built. The data encompass the main stock indexes from 19 individual countries in the G20. To consider the dynamic spillover, the full data set was divided into several sub-periods. The main contribution of this paper is considering the volatility spillover relationships as the edges of a complex network, which can capture the propagation path of volatility spillovers. The results indicate that the volatility spillovers among the stock markets of the G20 countries constitute a holistic associated network, another finding is that Korea acts a role of largest sender in long-term, while Brazil is the largest long-term recipient in the G20 spillover network.

MEMBRANE PROCESS TO SEQUESTER CO2 FROM POWER PLANT FLUE GAS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tim Merkel; Karl Amo; Richard Baker

2009-03-31

The objective of this project was to assess the feasibility of using a membrane process to capture CO2 from coal-fired power plant flue gas. During this program, MTR developed a novel membrane (Polaris™) with a CO2 permeance tenfold higher than commercial CO2-selective membranes used in natural gas treatment. The Polaris™ membrane, combined with a process design that uses a portion of combustion air as a sweep stream to generate driving force for CO2 permeation, meets DOE post-combustion CO2 capture targets. Initial studies indicate a CO2 separation and liquefaction cost of $20 - $30/ton CO2 using about 15% of the plantmore » energy at 90% CO2 capture from a coal-fired power plant. Production of the Polaris™ CO2 capture membrane was scaled up with MTR’s commercial casting and coating equipment. Parametric tests of cross-flow and countercurrent/sweep modules prepared from this membrane confirm their near-ideal performance under expected flue gas operating conditions. Commercial-scale, 8-inch diameter modules also show stable performance in field tests treating raw natural gas. These findings suggest that membranes are a viable option for flue gas CO2 capture. The next step will be to conduct a field demonstration treating a realworld power plant flue gas stream. The first such MTR field test will capture 1 ton CO2/day at Arizona Public Service’s Cholla coal-fired power plant, as part of a new DOE NETL funded program.« less

Prototype Development: Context-Driven Dynamic XML Ophthalmologic Data Capture Application

PubMed Central

Schwei, Kelsey M; Kadolph, Christopher; Finamore, Joseph; Cancel, Efrain; McCarty, Catherine A; Okorie, Asha; Thomas, Kate L; Allen Pacheco, Jennifer; Pathak, Jyotishman; Ellis, Stephen B; Denny, Joshua C; Rasmussen, Luke V; Tromp, Gerard; Williams, Marc S; Vrabec, Tamara R; Brilliant, Murray H

2017-01-01

Background The capture and integration of structured ophthalmologic data into electronic health records (EHRs) has historically been a challenge. However, the importance of this activity for patient care and research is critical. Objective The purpose of this study was to develop a prototype of a context-driven dynamic extensible markup language (XML) ophthalmologic data capture application for research and clinical care that could be easily integrated into an EHR system. Methods Stakeholders in the medical, research, and informatics fields were interviewed and surveyed to determine data and system requirements for ophthalmologic data capture. On the basis of these requirements, an ophthalmology data capture application was developed to collect and store discrete data elements with important graphical information. Results The context-driven data entry application supports several features, including ink-over drawing capability for documenting eye abnormalities, context-based Web controls that guide data entry based on preestablished dependencies, and an adaptable database or XML schema that stores Web form specifications and allows for immediate changes in form layout or content. The application utilizes Web services to enable data integration with a variety of EHRs for retrieval and storage of patient data. Conclusions This paper describes the development process used to create a context-driven dynamic XML data capture application for optometry and ophthalmology. The list of ophthalmologic data elements identified as important for care and research can be used as a baseline list for future ophthalmologic data collection activities. PMID:28903894

Trap Height Affects Capture of Lady Beetles (Coleoptera: Coccinellidae) in Pecan Orchards.

PubMed

Cottrell, T E

2017-04-01

There is scarce information regarding the vertical stratification of predaceous Coccinellidae in tall trees. Although numerous studies have been done in orchards and forests, very few studies have assessed the occurrence of predaceous Coccinellidae high in tree canopies. The objective of this study was to examine the abundance of Coccinellidae at different heights in mature pecan, Carya illinoinensis (Wangenh.) K. Koch, orchards with tall trees. From spring through late fall during 2013 and 2014, yellow pyramidal Tedders traps were suspended in the pecan canopy at 6.1 and 12.2 m, in addition to being placed on the ground (0 m). The exotic species Harmonia axyridis and Coccinella septempunctata accounted for a high percentage of trap capture during this study. Except for Olla v-nigrum, low numbers of native species (Hippodamia convergens, Coleomegilla maculata, Cycloneda munda, Scymnus spp., and Hyperaspis spp.) were captured. However, significantly more were captured in ground traps rather than in canopy traps with the exception of O. v-nigrum. Similar to most native species, significantly more C. septempunctata were captured in ground traps than canopy traps. This contrasts sharply with H. axyridis captured similarly at all trap heights. The ability to exploit resources across vertical strata, unlike many intraguild predators, may be an underestimated factor helping to explain the invasiveness of H. axyridis. Published by Oxford University Press on behalf of Entomological Society of America 2017. This work is written by a US Government employee and is in the public domain in the US.

Adapting Cognitive Task Analysis to Investigate Clinical Decision Making and Medication Safety Incidents.

PubMed

Russ, Alissa L; Militello, Laura G; Glassman, Peter A; Arthur, Karen J; Zillich, Alan J; Weiner, Michael

2017-05-03

Cognitive task analysis (CTA) can yield valuable insights into healthcare professionals' cognition and inform system design to promote safe, quality care. Our objective was to adapt CTA-the critical decision method, specifically-to investigate patient safety incidents, overcome barriers to implementing this method, and facilitate more widespread use of cognitive task analysis in healthcare. We adapted CTA to facilitate recruitment of healthcare professionals and developed a data collection tool to capture incidents as they occurred. We also leveraged the electronic health record (EHR) to expand data capture and used EHR-stimulated recall to aid reconstruction of safety incidents. We investigated 3 categories of medication-related incidents: adverse drug reactions, drug-drug interactions, and drug-disease interactions. Healthcare professionals submitted incidents, and a subset of incidents was selected for CTA. We analyzed several outcomes to characterize incident capture and completed CTA interviews. We captured 101 incidents. Eighty incidents (79%) met eligibility criteria. We completed 60 CTA interviews, 20 for each incident category. Capturing incidents before interviews allowed us to shorten the interview duration and reduced reliance on healthcare professionals' recall. Incorporating the EHR into CTA enriched data collection. The adapted CTA technique was successful in capturing specific categories of safety incidents. Our approach may be especially useful for investigating safety incidents that healthcare professionals "fix and forget." Our innovations to CTA are expected to expand the application of this method in healthcare and inform a wide range of studies on clinical decision making and patient safety.

UAV Monitoring for Enviromental Management in Galapagos Islands

NASA Astrophysics Data System (ADS)

Ballari, D.; Orellana, D.; Acosta, E.; Espinoza, A.; Morocho, V.

2016-06-01

In the Galapagos Islands, where 97% of the territory is protected and ecosystem dynamics are highly vulnerable, timely and accurate information is key for decision making. An appropriate monitoring system must meet two key features: on one hand, being able to capture information in a systematic and regular basis, and on the other hand, to quickly gather information on demand for specific purposes. The lack of such a system for geographic information limits the ability of Galapagos Islands' institutions to evaluate and act upon environmental threats such as invasive species spread and vegetation degradation. In this context, the use of UAVs (unmanned aerial vehicles) for capturing georeferenced images is a promising technology for environmental monitoring and management. This paper explores the potential of UAV images for monitoring degradation of littoral vegetation in Puerto Villamil (Isabela Island, Galapagos, Ecuador). Imagery was captured using two camera types: Red Green Blue (RGB) and Infrarred Red Green (NIR). First, vegetation presence was identified through NDVI. Second, object-based classification was carried out for characterization of vegetation vigor. Results demonstrates the feasibility of UAV technology for base-line studies and monitoring on the amount and vigorousness of littoral vegetation in the Galapagos Islands. It is also showed that UAV images are not only useful for visual interpretation and object delineation, but also to timely produce useful thematic information for environmental management.

Bio-inspired color image enhancement

NASA Astrophysics Data System (ADS)

Meylan, Laurence; Susstrunk, Sabine

2004-06-01

Capturing and rendering an image that fulfills the observer's expectations is a difficult task. This is due to the fact that the signal reaching the eye is processed by a complex mechanism before forming a percept, whereas a capturing device only retains the physical value of light intensities. It is especially difficult to render complex scenes with highly varying luminances. For example, a picture taken inside a room where objects are visible through the windows will not be rendered correctly by a global technique. Either details in the dim room will be hidden in shadow or the objects viewed through the window will be too bright. The image has to be treated locally to resemble more closely to what the observer remembers. The purpose of this work is to develop a technique for rendering images based on human local adaptation. We take inspiration from a model of color vision called Retinex. This model determines the perceived color given spatial relationships of the captured signals. Retinex has been used as a computational model for image rendering. In this article, we propose a new solution inspired by Retinex that is based on a single filter applied to the luminance channel. All parameters are image-dependent so that the process requires no parameter tuning. That makes the method more flexible than other existing ones. The presented results show that our method suitably enhances high dynamic range images.

New opportunities for quality enhancing of images captured by passive THz camera

NASA Astrophysics Data System (ADS)

Trofimov, Vyacheslav A.; Trofimov, Vladislav V.

2014-10-01

As it is well-known, the passive THz camera allows seeing concealed object without contact with a person and this camera is non-dangerous for a person. Obviously, efficiency of using the passive THz camera depends on its temperature resolution. This characteristic specifies possibilities of the detection for concealed object: minimal size of the object; maximal distance of the detection; image quality. Computer processing of the THz image may lead to many times improving of the image quality without any additional engineering efforts. Therefore, developing of modern computer code for its application to THz images is urgent problem. Using appropriate new methods one may expect such temperature resolution which will allow to see banknote in pocket of a person without any real contact. Modern algorithms for computer processing of THz images allow also to see object inside the human body using a temperature trace on the human skin. This circumstance enhances essentially opportunity of passive THz camera applications for counterterrorism problems. We demonstrate opportunities, achieved at present time, for the detection both of concealed objects and of clothes components due to using of computer processing of images captured by passive THz cameras, manufactured by various companies. Another important result discussed in the paper consists in observation of both THz radiation emitted by incandescent lamp and image reflected from ceramic floorplate. We consider images produced by THz passive cameras manufactured by Microsemi Corp., and ThruVision Corp., and Capital Normal University (Beijing, China). All algorithms for computer processing of the THz images under consideration in this paper were developed by Russian part of author list. Keywords: THz wave, passive imaging camera, computer processing, security screening, concealed and forbidden objects, reflected image, hand seeing, banknote seeing, ceramic floorplate, incandescent lamp.

Expanded opportunities of THz passive camera for the detection of concealed objects

NASA Astrophysics Data System (ADS)

Trofimov, Vyacheslav A.; Trofimov, Vladislav V.; Kuchik, Igor E.

2013-10-01

Among the security problems, the detection of object implanted into either the human body or animal body is the urgent problem. At the present time the main tool for the detection of such object is X-raying only. However, X-ray is the ionized radiation and therefore can not be used often. Other way for the problem solving is passive THz imaging using. In our opinion, using of the passive THz camera may help to detect the object implanted into the human body under certain conditions. The physical reason of such possibility arises from temperature trace on the human skin as a result of the difference in temperature between object and parts of human body. Modern passive THz cameras have not enough resolution in temperature to see this difference. That is why, we use computer processing to enhance the passive THz camera resolution for this application. After computer processing of images captured by passive THz camera TS4, developed by ThruVision Systems Ltd., we may see the pronounced temperature trace on the human body skin from the water, which is drunk by person, or other food eaten by person. Nevertheless, there are many difficulties on the way of full soution of this problem. We illustrate also an improvement of quality of the image captured by comercially available passive THz cameras using computer processing. In some cases, one can fully supress a noise on the image without loss of its quality. Using computer processing of the THz image of objects concealed on the human body, one may improve it many times. Consequently, the instrumental resolution of such device may be increased without any additional engineering efforts.

Chemical analysis of three barium stars: HD 51959, HD 88035, and HD 121447

NASA Astrophysics Data System (ADS)

Karinkuzhi, Drisya; Goswami, Aruna; Sridhar, Navin; Masseron, Thomas; Purandardas, Meenakshi

2018-05-01

We present elemental abundance results from high-resolution spectral analysis of three nitrogen-enhanced barium stars. The analysis is based on spectra obtained with the fibre-fed extended range optical spectrograph attached to 1.52 m telescope at European Southern Observatory, Chile. The spectral resolution is R ˜ 48,000 and the spectral coverage spans from 3500 to 9000Å . For the objects HD 51959 and HD 88035, we present the first-time abundance analyses results. Although a few studies are available in literature on the object HD 121447, the results are significantly different from each other. We have therefore carried out a detailed chemical composition study for this object based on a high-resolution spectrum with high S/N ratio, for a better understanding of the origin of the abundance patterns observed in this star. Stellar atmospheric parameters, the effective temperature, surface gravity, microturbulence, and metallicity of the stars are determined from the local thermodynamic equilibrium analysis using model atmospheres. The metallicities of HD 51959 and HD 88035 are found to be near-solar; they exhibit enhanced abundances of neutron-capture elements. HD 121447 is found to be moderately metal-poor with [Fe/H] = -0.65. While carbon is near-solar in the other two objects, HD 121447 shows carbon enhancement at a level, [C/Fe] = 0.82. Neutron-capture elements are highly enhanced with [X/Fe] > 2 (X: Ba, La, Pr, Nd, Sm) in this object. The α- and iron-peak elements show abundances very similar to field giants with the same metallicity. From kinematic analysis all the three objects are found to be members of thin disc population with a high probability of 0.99, 0.99, and 0.92 for HD 51959, HD 88035, and HD 121447, respectively.

Animacy, perceptual load, and inattentional blindness.

PubMed

Calvillo, Dustin P; Jackson, Russell E

2014-06-01

Inattentional blindness is the failure to notice unexpected objects in a visual scene while engaging in an attention-demanding task. We examined the effects of animacy and perceptual load on inattentional blindness. Participants searched for a category exemplar under low or high perceptual load. On the last trial, the participants were exposed to an unexpected object that was either animate or inanimate. Unexpected objects were detected more frequently when they were animate rather than inanimate, and more frequently with low than with high perceptual loads. We also measured working memory capacity and found that it predicted the detection of unexpected objects, but only with high perceptual loads. The results are consistent with the animate-monitoring hypothesis, which suggests that animate objects capture attention because of the importance of the detection of animate objects in ancestral hunter-gatherer environments.

Background oriented schlieren measurement of the refractive index field of air induced by a hot, cylindrical measurement object.

PubMed

Beermann, Rüdiger; Quentin, Lorenz; Pösch, Andreas; Reithmeier, Eduard; Kästner, Markus

2017-05-10

To optically capture the topography of a hot measurement object with high precision, the light deflection by the inhomogeneous refractive index field-induced by the heat transfer from the measurement object to the ambient medium-has to be considered. We used the 2D background oriented schlieren method with illuminated wavelet background, an optical flow algorithm, and Ciddor's equation to quantify the refractive index field located directly above a red-glowing, hot measurement object. A heat transfer simulation has been implemented to verify the magnitude and the shape of the measured refractive index field. Provided that no forced external flow is disturbing the shape of the convective flow originating from the hot object, a laminar flow can be observed directly above the object, resulting in a sharply bounded, inhomogeneous refractive index field.

Lake Charles CCS Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leib, Thomas; Cole, Dan

In late September 2014 development of the Lake Charles Clean Energy (LCCE) Plant was abandoned resulting in termination of Lake Charles Carbon Capture and Sequestration (CCS) Project which was a subset the LCCE Plant. As a result, the project was only funded through Phase 2A (Design) and did not enter Phase 2B (Construction) or Phase 2C (Operations). This report was prepared relying on information prepared and provided by engineering companies which were engaged by Leucadia Energy, LLC to prepare or review Front End Engineering and Design (FEED) for the Lake Charles Clean Energy Project, which includes the Carbon Capture andmore » Sequestration (CCS) Project in Lake Charles, Louisiana. The Lake Charles Carbon Capture and Sequestration (CCS) Project was to be a large-scale industrial CCS project intended to demonstrate advanced technologies that capture and sequester carbon dioxide (CO 2) emissions from industrial sources into underground formations. The Scope of work was divided into two discrete sections; 1) Capture and Compression prepared by the Recipient Leucadia Energy, LLC, and 2) Transport and Sequestration prepared by sub-Recipient Denbury Onshore, LLC. Capture and Compression-The Lake Charles CCS Project Final Technical Report describes the systems and equipment that would be necessary to capture CO 2 generated in a large industrial gasification process and sequester the CO 2 into underground formations. The purpose of each system is defined along with a description of its equipment and operation. Criteria for selection of major equipment are provided and ancillary utilities necessary for safe and reliable operation in compliance with environmental regulations are described. Construction considerations are described including a general arrangement of the CCS process units within the overall gasification project. A cost estimate is provided, delineated by system area with cost breakdown showing equipment, piping and materials, construction labor, engineering, and other costs. The CCS Project Final Technical Report is based on a Front End Engineering and Design (FEED) study prepared by SK E&C, completed in [June] 2014. Subsequently, Fluor Enterprises completed a FEED validation study in mid-September 2014. The design analyses indicated that the FEED package was sufficient and as expected. However, Fluor considered the construction risk based on a stick-build approach to be unacceptable, but construction risk would be substantially mitigated through utilization of modular construction where site labor and schedule uncertainty is minimized. Fluor’s estimate of the overall EPC project cost utilizing the revised construction plan was comparable to SKE&C’s value after reflecting Fluor’s assessment of project scope and risk characteristic. Development was halted upon conclusion of Phase 2A FEED and the project was not constructed.Transport and Sequestration – The overall objective of the pipeline project was to construct a pipeline to transport captured CO 2 from the Lake Charles Clean Energy project to the existing Denbury Green Line and then to the Hastings Field in Southeast Texas to demonstrate effective geologic sequestration of captured CO 2 through commercial EOR operations. The overall objective of the MVA portion of the project was to demonstrate effective geologic sequestration of captured CO 2 through commercial Enhanced Oil Recovery (EOR) operations in order to evaluate costs, operational processes and technical performance. The DOE target for the project was to capture and implement a research MVA program to demonstrate the sequestration through EOR of approximately one million tons of CO 2 per year as an integral component of commercial operations.« less

Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling.

PubMed

Suleiman, Abdulqadir M; Svendsen, Kristin V H

2015-12-01

Goal-oriented communication of risk of hazards is necessary in order to reduce risk of workers' exposure to chemicals. Adequate training of workers and enterprise priority setting are essential elements. Cleaning enterprises have many challenges and the existing paradigms influence the risk levels of these enterprises. Information on organization and enterprises' prioritization in training programs was gathered from cleaning enterprises. A measure of enterprises' conceptual level of importance of chemical health hazards and a model for working out the risk index (RI) indicating enterprises' conceptual risk level was established and used to categorize the enterprises. In 72.3% of cases, training takes place concurrently with task performances and in 67.4% experienced workers conduct the trainings. There is disparity between employers' opinion on competence level of the workers and reality. Lower conceptual level of importance was observed for cleaning enterprises of different sizes compared with regional safety delegates and occupational hygienists. Risk index values show no difference in risk level between small and large enterprises. Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step.

Ecological restoration as a strategy for conserving biological diversity

NASA Astrophysics Data System (ADS)

Jordan, William R.; Peters, Robert L.; Allen, Edith B.

1988-01-01

Though the restoration of disturbed ecosystems has so far played a relatively modest role in the effort to conserve biological diversity, there are reasons to suspect that its role will increase and that its contribution to the maintenance of diversity will ultimately prove crucial as techniques are further refined and as pristine areas for preservation become scarcer and more expensive. It is now possible to restore a number of North American communities with some confidence. However, it should be noted that many current efforts to return degraded lands to productive use, like attempts to reclaim land disturbed by mining, try only for rehabilitation to a socially acceptable condition and fall considerably short of actually restoring a native ecological community. Possible uses for restoration in the conservation of biodiversity include not only the creation of habitat on derelict sites, but also techniques for enlarging and redesigning existing reserves. Restoration may even make it possible to move reserves entirely in response to long-term events, such as changes in climate. Restoration in the form of reintroduction of single species to preexisting or restored habitat is also a critical link in programs to conserve species ex situ in the expectation of eventually returning them to the wild. And restoration provides opportunities to increase diversity through activities as diverse as management of utility corridors, transportation rights-of-way, and parks.

Reuse of coal mining wastes in civil engineering. Part 2: Utilization of minestone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skarzynska, K.M.

1995-11-01

The oldest method of minestone utilization is reclamation of spoil heaps by adapting them to the landscape by afforestation or agricultural management. The best method is, however, complete removal of the wastes. Hence, for many years research has been carried out to find new ways of minestone utilization to minimize disposal cost and harmful environmental effects. Earth structures offer the best possibilities of minestone utilization. Investigations conducted in recent years in Germany, the United Kingdom, France, Belgium, the Netherlands and also in Poland have led to the use of many tones of wastes in the construction of road and railroadmore » banks, river embankments, dykes and dams, filling of land depressions and open pits, as well as for sea wharfs and land reclamation. This paper presents descriptions of minestone applications to hydraulic, harbor and road engineering as well as to mine backfilling and restoration of derelict land. Effective management of minestone is still the principal problem with respect to safety, economics and environmental protection. Hence, the propagation of minestone utilization of known sources and the search for new methods of its management are essential. Two sections in this review have been devoted to the prevention of spontaneous heating and combustion of minestone and to the impact of minestone structures on the environment and its protection.« less

2D virtual texture on 3D real object with coded structured light

NASA Astrophysics Data System (ADS)

Molinier, Thierry; Fofi, David; Salvi, Joaquim; Gorria, Patrick

2008-02-01

Augmented reality is used to improve color segmentation on human body or on precious no touch artifacts. We propose a technique to project a synthesized texture on real object without contact. Our technique can be used in medical or archaeological application. By projecting a suitable set of light patterns onto the surface of a 3D real object and by capturing images with a camera, a large number of correspondences can be found and the 3D points can be reconstructed. We aim to determine these points of correspondence between cameras and projector from a scene without explicit points and normals. We then project an adjusted texture onto the real object surface. We propose a global and automatic method to virtually texture a 3D real object.

3D shape measurement of moving object with FFT-based spatial matching

NASA Astrophysics Data System (ADS)

Guo, Qinghua; Ruan, Yuxi; Xi, Jiangtao; Song, Limei; Zhu, Xinjun; Yu, Yanguang; Tong, Jun

2018-03-01

This work presents a new technique for 3D shape measurement of moving object in translational motion, which finds applications in online inspection, quality control, etc. A low-complexity 1D fast Fourier transform (FFT)-based spatial matching approach is devised to obtain accurate object displacement estimates, and it is combined with single shot fringe pattern prolometry (FPP) techniques to achieve high measurement performance with multiple captured images through coherent combining. The proposed technique overcomes some limitations of existing ones. Specifically, the placement of marks on object surface and synchronization between projector and camera are not needed, the velocity of the moving object is not required to be constant, and there is no restriction on the movement trajectory. Both simulation and experimental results demonstrate the effectiveness of the proposed technique.

An introduction to requirements capture using PVS: Specification of a simple autopilot

NASA Technical Reports Server (NTRS)

Butler, Ricky W.

1996-01-01

This paper presents an introduction to capturing software requirements in the PVS formal language. The object of study is a simplified digital autopilot that was motivated in part by the mode control panel of NASA Langley's Boeing 737 research aircraft. The paper first presents the requirements for this autopilot in English and then steps the reader through a translation of these requirements into formal mathematics. Along the way deficiencies in the English specification are noted and repaired. Once completed, the formal PVS requirement is analyzed using the PVS theorem prover and shown to maintain an invariant over its state space.

Molecular Medicine: Synthesis and In Vivo Detection of Agents for use in Boron Neutron Capture Therapy. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kabalka, G. W.

2005-06-28

The primary objective of the project was the development of in vivo methods for the detection and evaluation of tumors in humans. The project was focused on utilizing positron emission tomography (PET) to monitor the distribution and pharamacokinetics of a current boron neutron capture therapy (BNCT) agent, p-boronophenylalanine (BPA) by labeling it with a fluorine-18, a positron emitting isotope. The PET data was then used to develop enhanced treatment planning protocols. The study also involved the synthesis of new tumor selective BNCTagents that could be labeled with radioactive nuclides for the in vivo detection of boron.

Magnetophoretic bead trapping in a high-flowrate biological detection system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galambos, Paul C.; Hopkins, Matthew Morgan; Rahimian, Kamayar

2005-03-01

This report contains the summary of the 'Magnetophoretic Bead Trapping in a High-Flowrate Biological Detection System' LDRD project 74795. The objective of this project is to develop a novel biodetection system for high-throughput sample analysis. The chief application of this system is in detection of very low concentrations of target molecules from a complex liquid solution containing many different constituents--some of which may interfere with identification of the target molecule. The system is also designed to handle air sampling by using an aerosol system (for instance a WESP - Wet Electro-Static Precipitator, or an impact spray system) to get airmore » sample constituents into the liquid volume. The system described herein automatically takes the raw liquid sample, whether air converted or initially liquid matrix, and mixes in magnetic detector beads that capture the targets of interest and then performs the sample cleanup function, allowing increased sensitivity and eliminating most false positives and false negatives at a downstream detector. The surfaces of the beads can be functionalized in a variety of ways in order to maximize the number of targets to be captured and concentrated. Bacteria and viruses are captured using antibodies to surface proteins on bacterial cell walls or viral particle coats. In combination with a cell lysis or PCR (Polymerase Chain Reaction), the beads can be used as a DNA or RNA probe to capture nucleic acid patterns of interest. The sample cleanup capability of this system would allow different raw biological samples, such as blood or saliva to be analyzed for the presence of different infectious agents (e.g. smallpox or SARS). For future studies, we envision functionalizing bead surfaces to bind to chemical weapons agents, radio-isotopes, and explosives. The two main objectives of this project were to explore methods for enhancing the mixing of the capture microspheres in the sample, and to develop a novel high-throughput magnetic microsphere trap. We have developed a novel technique using the magnetic capture microspheres as 'stirrer bars' in a fluid sample to enhance target binding to the microsphere surfaces. We have also made progress in developing a polymer-MEMS electromagnet for trapping magnetic spheres in a high-flowrate fluid format.« less

Heavy Element Abundances in Planetary Nebulae from Deep Optical Echelle Spectroscopy

NASA Astrophysics Data System (ADS)

Mashburn, Amanda; Sterling, Nicholas C.; Dinerstein, Harriet L.; Garofali, Kristen; Jensema, Rachael; Turbyfill, Amanda; Wieser, Hannah-Marie N.; Reed, Evan C.; Redfield, Seth

2016-01-01

We present the abundances of neutron(n)-capture elements (atomic number Z > 30) and iron determined from deep optical echelle spectroscopy of 14 Galactic planetary nebulae (PNe). The spectra were obtained with the 2D-coudé spectrograph on the 2.7-m Harlan J. Smith telescope at McDonald Observatory. The abundances of n-capture elements can be enhanced in PNe due to slow n-capture nucleosynthesis in the progenitor asymptotic giant branch (AGB) stars. The high spectral resolution of these data (R = 36,700) allow most n-capture element emission lines to be resolved from other nebular and telluric features. We detect Kr in all of the observed PNe (with multiple ions detected in several objects), while Br, Rb, and Xe were each detected in 4--5 objects. Using the new Kr ionization correction factors (ICFs) of Sterling et al. (2015, ApJS, 218, 25), we find [Kr/O] abundances ranging from 0.05 to 1.1 dex. We utilize approximate ICFs for the other n-capture elements, and find slightly lower enrichments for Br and Rb (-0.1 to 0.7 dex), while Xe is enhanced relative to solar by factors of two to 30. The [Xe/Kr] ratios range from -0.3 to 1.4 dex, indicating a significant range in neutron exposures in PN progenitor stars. Interestingly, the largest [Xe/Kr] ratio is found in the thick-disk PN NGC 6644, which has a lower metallicity than the other observed PNe. We detect iron emission lines in all but one target. Fe can be depleted into dust grains in ionized nebulae, and its abundance thus provides key information regarding dust-to-gas ratios and grain destruction processes. We find that [Fe/O] ranges from -1.3 to -0.7 dex in the observed PNe, a smaller spread of depletion factors than found in recent studies (Delgado-Inglada & Rodriguez 2014, ApJ, 784, 173) though this may be due in part to our smaller sample. These data are part of a larger study of heavy elements in PNe, which will provide more accurate determinations of n-capture element abundances than previous estimates in several PNe, thereby providing key new constraints to models of AGB nucleosynthesis and Galactic chemical evolution. This work was supported by NSF awards AST-0708245 and AST-901432.

Gaia: Science with 1 billion objects in three dimensions

NASA Astrophysics Data System (ADS)

Prusti, Timo

2018-02-01

Gaia is an operational satellite in the ESA science programme. It is gathering data for more than a billion objects. Gaia measures positions and motions of stars in our Milky Way Galaxy, but captures many asteroids and extragalactic sources as well. The first data release has already been made and exploitation by the world-wide scientific community is underway. Further data releases will be made with further increasing accuracy. Gaia is well underway to provide its promised set of fundamental astronomical data.

Vector-Based Ground Surface and Object Representation Using Cameras

DTIC Science & Technology

2009-12-01

representations and it is a digital data structure used for the representation of a ground surface in geographical information systems ( GIS ). Figure...Vision API library, and the OpenCV library. Also, the Posix thread library was utilized to quickly capture the source images from cameras. Both

Calibrating Reach Distance to Visual Targets

ERIC Educational Resources Information Center

Mon-Williams, Mark; Bingham, Geoffrey P.

2007-01-01

The authors investigated the calibration of reach distance by gradually distorting the haptic feedback obtained when participants grasped visible target objects. The authors found that the modified relationship between visually specified distance and reach distance could be captured by a straight-line mapping function. Thus, the relation could be…

Trap height affects capture of lady beetles (Coleoptera: Coccinellidae) in pecan orchards

USDA-ARS?s Scientific Manuscript database

There is scarce information regarding the vertical stratification of predaceous Coccinellidae in tall trees. Although numerous studies have been done in orchards and forests, very few studies have assessed the occurrence of predaceous Coccinellidae high in tree canopies. The objective of this stud...

SMART USE OF COMPUTER-AIDED SPERM ANALYSIS (CASA) TO CHARACTERIZE SPERM MOTION

EPA Science Inventory

Computer-aided sperm analysis (CASA) has evolved over the past fifteen years to provide an objective, practical means of measuring and characterizing the velocity and parttern of sperm motion. CASA instruments use video frame-grabber boards to capture multiple images of spermato...

Extending the Pedagogy of Mobility

ERIC Educational Resources Information Center

Hedberg, John G.

2014-01-01

Direct student experience of the real organism, object, place or environment is recognised by teachers as having powerful potential for high-quality learning. Mobile technologies offer a way for students to capture their authentic learning experiences, but rendering this rich experience into explicit and highly situated learning contexts for…

Visually driven chaining of elementary swim patterns into a goal-directed motor sequence: a virtual reality study of zebrafish prey capture.

PubMed

Trivedi, Chintan A; Bollmann, Johann H

2013-01-01

Prey capture behavior critically depends on rapid processing of sensory input in order to track, approach, and catch the target. When using vision, the nervous system faces the problem of extracting relevant information from a continuous stream of input in order to detect and categorize visible objects as potential prey and to select appropriate motor patterns for approach. For prey capture, many vertebrates exhibit intermittent locomotion, in which discrete motor patterns are chained into a sequence, interrupted by short periods of rest. Here, using high-speed recordings of full-length prey capture sequences performed by freely swimming zebrafish larvae in the presence of a single paramecium, we provide a detailed kinematic analysis of first and subsequent swim bouts during prey capture. Using Fourier analysis, we show that individual swim bouts represent an elementary motor pattern. Changes in orientation are directed toward the target on a graded scale and are implemented by an asymmetric tail bend component superimposed on this basic motor pattern. To further investigate the role of visual feedback on the efficiency and speed of this complex behavior, we developed a closed-loop virtual reality setup in which minimally restrained larvae recapitulated interconnected swim patterns closely resembling those observed during prey capture in freely moving fish. Systematic variation of stimulus properties showed that prey capture is initiated within a narrow range of stimulus size and velocity. Furthermore, variations in the delay and location of swim triggered visual feedback showed that the reaction time of secondary and later swims is shorter for stimuli that appear within a narrow spatio-temporal window following a swim. This suggests that the larva may generate an expectation of stimulus position, which enables accelerated motor sequencing if the expectation is met by appropriate visual feedback.

CO 2 capture from IGCC gas streams using the AC-ABC process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagar, Anoop; McLaughlin, Elisabeth; Hornbostel, Marc

The objective of this project was to develop a novel, low-cost CO 2 capture process from pre-combustion gas streams. The bench-scale work was conducted at the SRI International. A 0.15-MWe integrated pilot plant was constructed and operated for over 700 hours at the National Carbon Capture Center, Wilsonville, AL. The AC-ABC (ammonium carbonate-ammonium bicarbonate) process for capture of CO 2 and H 2S from the pre-combustion gas stream offers many advantages over Selexol-based technology. The process relies on the simple chemistry of the NH 3-CO 2-H 2O-H 2S system and on the ability of the aqueous ammoniated solution to absorbmore » CO 2 at near ambient temperatures and to release it as a high-purity, high-pressure gas at a moderately elevated regeneration temperature. It is estimated the increase in cost of electricity (COE) with the AC-ABC process will be ~ 30%, and the cost of CO 2 captured is projected to be less than $27/metric ton of CO 2 while meeting 90% CO 2 capture goal. The Bechtel Pressure Swing Claus (BPSC) is a complementary technology offered by Bechtel Hydrocarbon Technology Solutions, Inc. BPSC is a high-pressure, sub-dew-point Claus process that allows for nearly complete removal of H 2S from a gas stream. It operates at gasifier pressures and moderate temperatures and does not affect CO 2 content. When coupled with AC-ABC, the combined technologies allow a nearly pure CO 2 stream to be captured at high pressure, something which Selexol and other solvent-based technologies cannot achieve.« less

A method to assess social sustainability of capture fisheries: An application to a Norwegian trawler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veldhuizen, L.J.L., E-mail: linda.veldhuizen@wur.nl; Berentsen, P.B.M.; Bokkers, E.A.M.

Social sustainability assessment of capture fisheries is, both in terms of method development and measurement, not well developed. The objective of this study, therefore, was to develop a method consisting of indicators and rubrics (i.e. categories that articulate levels of performance) to assess social sustainability of capture fisheries. This method was applied to a Norwegian trawler that targets cod and haddock in the northeast Atlantic. Based on previous research, 13 social sustainability issues were selected. To measure the state of these issues, 17 process and outcome indicators were determined. To interpret indicator values, rubrics were developed for each indicator, usingmore » standards set by international conventions or data retrieved from national statistics, industry agreements or scientific publications that explore rubric scales. The indicators and rubrics were subsequently used in a social sustainability assessment of a Norwegian trawler. This assessment indicated that overall, social sustainability of this trawler is relatively high, with high rubric scores, for example, for worker safety, provisions aboard for the crew and companies' salary levels. The assessment also indicated that the trawler could improve on healthy working environment, product freshness and fish welfare during capture. This application demonstrated that our method provides insight into social sustainability at the level of the vessel and can be used to identify potential room for improvement. This method is also promising for social sustainability assessment of other capture fisheries. - Highlights: • A method was developed for social sustainability assessment of capture fisheries. • This method entailed determining outcome and process indicators for important issues. • To interpret indicator values, a rubric was developed for each indicator. • Use of this method gives insight into social sustainability and improvement options. • This method is promising for social sustainability assessment of capture fisheries.« less

Soft X-ray microscope with nanometer spatial resolution and its applications

NASA Astrophysics Data System (ADS)

Wachulak, P. W.; Torrisi, A.; Bartnik, A.; Wegrzynski, L.; Fok, T.; Patron, Z.; Fiedorowicz, H.

2016-12-01

A compact size microscope based on nitrogen double stream gas puff target soft X-ray source, which emits radiation in water-window spectral range at the wavelength of λ = 2.88 nm is presented. The microscope employs ellipsoidal grazing incidence condenser mirror for sample illumination and silicon nitride Fresnel zone plate objective for object magnification and imaging. The microscope is capable of capturing water-window images of objects with 60 nm spatial resolution and exposure time as low as a few seconds. Details about the microscopy system as well as some examples of different applications from various fields of science, are presented and discussed.

Learning to distinguish similar objects

NASA Astrophysics Data System (ADS)

Seibert, Michael; Waxman, Allen M.; Gove, Alan N.

1995-04-01

This paper describes how the similarities and differences among similar objects can be discovered during learning to facilitate recognition. The application domain is single views of flying model aircraft captured in silhouette by a CCD camera. The approach was motivated by human psychovisual and monkey neurophysiological data. The implementation uses neural net processing mechanisms to build a hierarchy that relates similar objects to superordinate classes, while simultaneously discovering the salient differences between objects within a class. Learning and recognition experiments both with and without the class similarity and difference learning show the effectiveness of the approach on this visual data. To test the approach, the hierarchical approach was compared to a non-hierarchical approach, and was found to improve the average percentage of correctly classified views from 77% to 84%.

A Lakatosian Encounter with Probability

ERIC Educational Resources Information Center

Chick, Helen

2010-01-01

There is much to be learned and pondered by reading "Proofs and Refutations" by Imre Lakatos (Lakatos, 1976). It highlights the importance of mathematical definitions, and how definitions evolve to capture the essence of the object they are defining. It also provides an exhilarating encounter with the ups and downs of the mathematical reasoning…

A Lakatosian Encounter

ERIC Educational Resources Information Center

Chick, Helen

2010-01-01

There is much to be learned and pondered by reading "Proofs and Refutations," by Imre Lakatos. It highlights the importance of mathematical definitions, and how definitions evolve to capture the essence of the object they are defining. It also provides an exhilarating encounter with the ups and downs of the mathematical reasoning process, where…

Crop rotation and residue management effects on deficit irrigated cotton and corn

USDA-ARS?s Scientific Manuscript database

Compared with disk tillage (DT), no-tillage (NT) retains residue and increases precipitation capture, which has the potential to reduce irrigation withdrawals from the declining Ogallala Aquifer. Our objective was to quantify DT and NT effects on water conservation during fallow and the subsequent y...

Past into Future: Capturing Library Expertise in a Virtual Library.

ERIC Educational Resources Information Center

Daniels, Wayne; Scardellato, Kathy

1999-01-01

Reports on an initiative by the Toronto Public Library to create the "Virtual Reference Library" (VRL). Describes the first service to be offered, a Dewey application called "Science Net." Discusses the VRL and its precursor, objectives, basis for its funding, technical aspects, progress to date and future direction. (AEF)

Identification of gene networks underlying dystocia in dairy cattle

USDA-ARS?s Scientific Manuscript database

Dystocia is a trait with a high impact in the dairy industry. Among its risk factors are calf weight, gestation length, breed and conformation. Biological networks have been proposed to capture the genetic architecture of complex traits, where GWAS show limitations. The objective of this study was t...

Applying Tacit Knowledge Management Techniques for Performance Assessment

ERIC Educational Resources Information Center

Mitri, Michel

2003-01-01

Performance assessment is an important task in all levels of education, both as input for identifying remedial needs of individual students and for improving general quality of education. Although explicit assessment measures can be obtained through objective standardized testing, it is much more difficult to capture fuzzier, or tacit, performance…

CogSkillnet: An Ontology-Based Representation of Cognitive Skills

ERIC Educational Resources Information Center

Askar, Petek; Altun, Arif

2009-01-01

A number of studies emphasized the need to capture learners' interaction patterns in order to personalize their learning process as they study through learning objects. In education context, learning materials are designed based on pre-determined expectations and learners are evaluated to what extent they master these expectations. Representation…

Sodium and sulfur release and recapture during black liquor burning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frederick, W.J.; Iisa, K.; Wag, K.

1995-08-01

The objective of this study was to provide data on sulfur and sodium volatilization during black liquor burning, and on SO2 capture by solid sodium carbonate and sodium chloride. This data was interpreted and modeled into rate equations suitable for use in computational models for recovery boilers.

Teaching Geometry to Visually Impaired Students

ERIC Educational Resources Information Center

Pritchard, Christine K.; Lamb, John H.

2012-01-01

NCTM (2000) described geometry as "a means of describing, analyzing, and understanding the world and seeing beauty in its structures" (p. 309). Dossey et al. (2002) captured the essence of this aspect of visualization by stating that geometry fosters in students an ability to "visualize and mentally manipulate geometric objects." (p. 200).…

Spatial image modulation to improve performance of computed tomography imaging spectrometer

NASA Technical Reports Server (NTRS)

Bearman, Gregory H. (Inventor); Wilson, Daniel W. (Inventor); Johnson, William R. (Inventor)

2010-01-01

Computed tomography imaging spectrometers ("CTIS"s) having patterns for imposing spatial structure are provided. The pattern may be imposed either directly on the object scene being imaged or at the field stop aperture. The use of the pattern improves the accuracy of the captured spatial and spectral information.

Emotion Regulation and Heterogeneity in Attention-Deficit/Hyperactivity Disorder

ERIC Educational Resources Information Center

Musser, Erica D.; Galloway-Long, Hilary S.; Frick, Paul J.; Nigg, Joel T.

2013-01-01

Objective: How best to capture heterogeneity in attention-deficit/hyperactivity disorder (ADHD) using biomarkers has been elusive. This study evaluated whether emotion reactivity and regulation provide a means to achieve this. Method: Participants were classified into three groups: children with ADHD plus low prosocial behavior (hypothesized to be…

The Origin of Pluto's Orbit: Implications for the Solar System Beyond Neptune

NASA Technical Reports Server (NTRS)

Malhotra, Renu

1995-01-01

The origin of the highly eccentric, inclined, and resonance-locked orbit of Pluto has long been a puzzle. A possible explanation has been proposed recently which suggests that these extraordinary orbital properties may be a natural consequence of the formation and early dynamical evolution of the outer solar system. A resonance capture mechanism is possible during the clearing of the residual planetesimal debris and the formation of the Oort Cloud of comets by planetesimal mass loss from the vicinity of the giant planets. If this mechanism were in operation during the early history of the planetary system, the entire region between the orbit of Neptune and approximately 50 AU would have been swept by first-order mean motion resonances. Thus, resonance capture could occur not only for Pluto, but quite generally for other trans-Neptunian small bodies. Some consequences of this evolution for the present-day dynamical structure of the trans-Neptunian region are (1) most of the objects in the region beyond Neptune and up to approximately 50 AU exist in very narrow zones located at orbital resonances with Neptune (particularly the 3:2 and the 2:1 resonances); and (2) these resonant objects would have significantly large eccentricities. The distribution of objects in the Kuiper Belt as predicted by this theory is presented here.

Hierarchical Context Modeling for Video Event Recognition.

PubMed

Wang, Xiaoyang; Ji, Qiang

2016-10-11

Current video event recognition research remains largely target-centered. For real-world surveillance videos, targetcentered event recognition faces great challenges due to large intra-class target variation, limited image resolution, and poor detection and tracking results. To mitigate these challenges, we introduced a context-augmented video event recognition approach. Specifically, we explicitly capture different types of contexts from three levels including image level, semantic level, and prior level. At the image level, we introduce two types of contextual features including the appearance context features and interaction context features to capture the appearance of context objects and their interactions with the target objects. At the semantic level, we propose a deep model based on deep Boltzmann machine to learn event object representations and their interactions. At the prior level, we utilize two types of prior-level contexts including scene priming and dynamic cueing. Finally, we introduce a hierarchical context model that systematically integrates the contextual information at different levels. Through the hierarchical context model, contexts at different levels jointly contribute to the event recognition. We evaluate the hierarchical context model for event recognition on benchmark surveillance video datasets. Results show that incorporating contexts in each level can improve event recognition performance, and jointly integrating three levels of contexts through our hierarchical model achieves the best performance.

Echolocating bats use future-target information for optimal foraging.

PubMed

Fujioka, Emyo; Aihara, Ikkyu; Sumiya, Miwa; Aihara, Kazuyuki; Hiryu, Shizuko

2016-04-26

When seeing or listening to an object, we aim our attention toward it. While capturing prey, many animal species focus their visual or acoustic attention toward the prey. However, for multiple prey items, the direction and timing of attention for effective foraging remain unknown. In this study, we adopted both experimental and mathematical methodology with microphone-array measurements and mathematical modeling analysis to quantify the attention of echolocating bats that were repeatedly capturing airborne insects in the field. Here we show that bats select rational flight paths to consecutively capture multiple prey items. Microphone-array measurements showed that bats direct their sonar attention not only to the immediate prey but also to the next prey. In addition, we found that a bat's attention in terms of its flight also aims toward the next prey even when approaching the immediate prey. Numerical simulations revealed a possibility that bats shift their flight attention to control suitable flight paths for consecutive capture. When a bat only aims its flight attention toward its immediate prey, it rarely succeeds in capturing the next prey. These findings indicate that bats gain increased benefit by distributing their attention among multiple targets and planning the future flight path based on additional information of the next prey. These experimental and mathematical studies allowed us to observe the process of decision making by bats during their natural flight dynamics.

A Study of Vicon System Positioning Performance.

PubMed

Merriaux, Pierre; Dupuis, Yohan; Boutteau, Rémi; Vasseur, Pascal; Savatier, Xavier

2017-07-07

Motion capture setups are used in numerous fields. Studies based on motion capture data can be found in biomechanical, sport or animal science. Clinical science studies include gait analysis as well as balance, posture and motor control. Robotic applications encompass object tracking. Today's life applications includes entertainment or augmented reality. Still, few studies investigate the positioning performance of motion capture setups. In this paper, we study the positioning performance of one player in the optoelectronic motion capture based on markers: Vicon system. Our protocol includes evaluations of static and dynamic performances. Mean error as well as positioning variabilities are studied with calibrated ground truth setups that are not based on other motion capture modalities. We introduce a new setup that enables directly estimating the absolute positioning accuracy for dynamic experiments contrary to state-of-the art works that rely on inter-marker distances. The system performs well on static experiments with a mean absolute error of 0.15 mm and a variability lower than 0.025 mm. Our dynamic experiments were carried out at speeds found in real applications. Our work suggests that the system error is less than 2 mm. We also found that marker size and Vicon sampling rate must be carefully chosen with respect to the speed encountered in the application in order to reach optimal positioning performance that can go to 0.3 mm for our dynamic study.

The weaker effects of First-order mean motion resonances in intermediate inclinations

NASA Astrophysics Data System (ADS)

Chen, YuanYuan; Quillen, Alice C.; Ma, Yuehua; Chinese Scholar Council, the National Natural Science Foundation of China, the Natural Science Foundation of Jiangsu Province, the Minor Planet Foundation of the Purple Mountain Observatory

2017-10-01

During planetary migration, a planet or planetesimal can be captured into a low-order mean motion resonance with another planet. Using a second-order expansion of the disturbing function in eccentricity and inclination, we explore the sensitivity of the capture probability of first-order mean motion resonances to orbital inclination. We find that second-order inclination contributions affect the resonance strengths, reducing them at intermediate inclinations of around 10-40° for major first-order resonances. We also integrated the Hamilton's equations with arbitrary initial arguments, and provided the varying tendencies of resonance capture probabilities versus orbital inclinations for different resonances and different particle or planetary eccentricities. Resonance-weaker ranges in inclinations generally appear at the places where resonance strengths are low, around 10-40° in general. The weaker ranges disappear with a higher particle eccentricity (≳0.05) or planetary eccentricity (≳0.05). These resonance-weaker ranges in inclinations implies that intermediate-inclination objects are less likely to be disturbed or captured into the first-order resonances, which would make them entering into the chaotic area around Neptune with a larger fraction than those with low inclinations, during the epoch of Neptune's outward migration. The privilege of high-inclination particles leave them to be more likely captured into Neptune Trojans, which might be responsible for the unexpected high fraction of high-inclination Neptune Trojans.

Computational simulation of extravehicular activity dynamics during a satellite capture attempt.

PubMed

Schaffner, G; Newman, D J; Robinson, S K

2000-01-01

A more quantitative approach to the analysis of astronaut extravehicular activity (EVA) tasks is needed because of their increasing complexity, particularly in preparation for the on-orbit assembly of the International Space Station. Existing useful EVA computer analyses produce either high-resolution three-dimensional computer images based on anthropometric representations or empirically derived predictions of astronaut strength based on lean body mass and the position and velocity of body joints but do not provide multibody dynamic analysis of EVA tasks. Our physics-based methodology helps fill the current gap in quantitative analysis of astronaut EVA by providing a multisegment human model and solving the equations of motion in a high-fidelity simulation of the system dynamics. The simulation work described here improves on the realism of previous efforts by including three-dimensional astronaut motion, incorporating joint stops to account for the physiological limits of range of motion, and incorporating use of constraint forces to model interaction with objects. To demonstrate the utility of this approach, the simulation is modeled on an actual EVA task, namely, the attempted capture of a spinning Intelsat VI satellite during STS-49 in May 1992. Repeated capture attempts by an EVA crewmember were unsuccessful because the capture bar could not be held in contact with the satellite long enough for the capture latches to fire and successfully retrieve the satellite.

Membrane-based systems for carbon capture and hydrogen purification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berchtold, Kathryn A

2010-11-24

This presentation describes the activities being conducted at Los Alamos National Laboratory to develop carbon capture technologies for power systems. This work is aimed at continued development and demonstration of a membrane based pre- and post-combustion carbon capture technology and separation schemes. Our primary work entails the development and demonstration of an innovative membrane technology for pre-combustion capture of carbon dioxide that operates over a broad range of conditions relevant to the power industry while meeting the US DOE's Carbon Sequestration Program goals of 90% CO{sub 2} capture at less than a 10% increase in the cost of energy services.more » Separating and capturing carbon dioxide from mixed gas streams is a first and critical step in carbon sequestration. To be technically and economically viable, a successful separation method must be applicable to industrially relevant gas streams at realistic temperatures and pressures as well as be compatible with large gas volumes. Our project team is developing polymer membranes based on polybenzimidazole (PBI) chemistries that can purify hydrogen and capture CO{sub 2} at industrially relevant temperatures. Our primary objectives are to develop and demonstrate polymer-based membrane chemistries, structures, deployment platforms, and sealing technologies that achieve the critical combination of high selectivity, high permeability, chemical stability, and mechanical stability all at elevated temperatures (> 150 C) and packaged in a scalable, economically viable, high area density system amenable to incorporation into an advanced Integrated Gasification Combined-Cycle (IGCC) plant for pre-combustion CO{sub 2} capture. Stability requirements are focused on tolerance to the primary synthesis gas components and impurities at various locations in the IGCC process. Since the process stream compositions and conditions (temperature and pressure) vary throughout the IGCC process, the project is focused on the optimization of a technology that could be positioned upstream or downstream of one or more of the water-gas-shift reactors (WGSRs) or integrated with a WGSR.« less

Sustained acceleration on perception of relative position and motion.

PubMed

McKinley, R Andrew; Tripp, Lloyd D; Fullerton, Kathy L; Goodyear, Chuck

2013-03-01

Air-to-air refueling, formation flying, and projectile countermeasures all rely on a pilot's ability to be aware of his position and motion relative to another object. Eight subjects participated in the study, all members of the sustained acceleration stress panel at Wright-Patterson AFB, OH. The task consisted of the subject performing a two-dimensional join up task between a KC-135 tanker and an F-16. The objective was to guide the nose of the F-16 to the posterior end of the boom extended from the tanker, and hold this position for 2 s. If the F-16 went past the tanker, or misaligned with the tanker, it would be recorded as an error. These tasks were performed during four G(z) acceleration profiles starting from a baseline acceleration of 1.5 G(z). The plateaus were 3, 5, and 7 G(z). The final acceleration exposure was a simulated aerial combat maneuver (SACM). One subject was an outlier and therefore omitted from analysis. The mean capture time and percent error data were recorded and compared separately. There was a significant difference in error percentage change from baseline among the G(z) profiles, but not capture time. Mean errors were approximately 15% higher in the 7 G profile and 10% higher during the SACM. This experiment suggests that the ability to accurately perceive the motion of objects relative to other objects is impeded at acceleration levels of 7 G(z) or higher.

Efficient testing methodologies for microcameras in a gigapixel imaging system

NASA Astrophysics Data System (ADS)

Youn, Seo Ho; Marks, Daniel L.; McLaughlin, Paul O.; Brady, David J.; Kim, Jungsang

2013-04-01

Multiscale parallel imaging--based on a monocentric optical design--promises revolutionary advances in diverse imaging applications by enabling high resolution, real-time image capture over a wide field-of-view (FOV), including sport broadcast, wide-field microscopy, astronomy, and security surveillance. Recently demonstrated AWARE-2 is a gigapixel camera consisting of an objective lens and 98 microcameras spherically arranged to capture an image over FOV of 120° by 50°, using computational image processing to form a composite image of 0.96 gigapixels. Since microcameras are capable of individually adjusting exposure, gain, and focus, true parallel imaging is achieved with a high dynamic range. From the integration perspective, manufacturing and verifying consistent quality of microcameras is a key to successful realization of AWARE cameras. We have developed an efficient testing methodology that utilizes a precisely fabricated dot grid chart as a calibration target to extract critical optical properties such as optical distortion, veiling glare index, and modulation transfer function to validate imaging performance of microcameras. This approach utilizes an AWARE objective lens simulator which mimics the actual objective lens but operates with a short object distance, suitable for a laboratory environment. Here we describe the principles of the methodologies developed for AWARE microcameras and discuss the experimental results with our prototype microcameras. Reference Brady, D. J., Gehm, M. E., Stack, R. A., Marks, D. L., Kittle, D. S., Golish, D. R., Vera, E. M., and Feller, S. D., "Multiscale gigapixel photography," Nature 486, 386--389 (2012).

Long-Range Capture and Delivery of Water-Dispersed Nano-objects by Microbubbles Generated on 3D Plasmonic Surfaces.

PubMed

Tantussi, Francesco; Messina, Gabriele C; Capozza, Rosario; Dipalo, Michele; Lovato, Laura; De Angelis, Francesco

2018-05-22

The possibility of investigating small amounts of molecules, moieties, or nano-objects dispersed in solution constitutes a central step for various application areas in which high sensitivity is necessary. Here, we show that the rapid expansion of a water bubble can act as a fast-moving net for molecules or nano-objects, collecting the floating objects in the surrounding medium in a range up to 100 μm. Thanks to an engineered 3D patterning of the substrate, the collapse of the bubble could be guided toward a designed area of the surface with micrometric precision. Thus, a locally confined high density of particles is obtained, ready for evaluation by most optical/spectroscopic detection schemes. One of the main relevant strengths of the long-range capture and delivery method is the ability to increase, by a few orders of magnitude, the local density of particles with no changes in their physiological environment. The bubble is generated by an ultrafast IR laser pulse train focused on a resonant plasmonic antenna; due to the excitation process, the technique is trustworthy and applicable to biological samples. We have tested the reliabilities of the process by concentrating highly dispersed fluorescence molecules and fluorescent beads. Lastly, as an ultimate test, we have applied the bubble clustering method on nanosized exosome vesicles dispersed in water; due to the clustering effect, we were able to effectively perform Raman spectroscopy on specimens that were otherwise extremely difficult to measure.

Study of Design Knowledge Capture (DKC) schemes implemented in magnetic bearing applications

NASA Technical Reports Server (NTRS)

1990-01-01

A design knowledge capture (DKC) scheme was implemented using frame-based techniques. The objective of such a system is to capture not only the knowledge which describes a design, but also that which explains how the design decisions were reached. These knowledge types were labelled definitive and explanatory, respectively. Examination of the design process helped determine what knowledge to retain and at what stage that knowledge is used. A discussion of frames resulted in the recognition of their value to knowledge representation and organization. The FORMS frame system was used as a basis for further development, and for examples using magnetic bearing design. The specific contributions made by this research include: determination that frame-based systems provide a useful methodology for management and application of design knowledge; definition of specific user interface requirements, (this consists of a window-based browser); specification of syntax for DKC commands; and demonstration of the feasibility of DKC by applications to existing designs. It was determined that design knowledge capture could become an extremely valuable engineering tool for complicated, long-life systems, but that further work was needed, particularly the development of a graphic, window-based interface.

Engineering graphics data entry for space station data base

NASA Technical Reports Server (NTRS)

Lacovara, R. C.

1986-01-01

The entry of graphical engineering data into the Space Station Data Base was examined. Discussed were: representation of graphics objects; representation of connectivity data; graphics capture hardware; graphics display hardware; site-wide distribution of graphics, and consolidation of tools and hardware. A fundamental assumption was that existing equipment such as IBM based graphics capture software and VAX networked facilities would be exploited. Defensible conclusions reached after study and simulations of use of these systems at the engineering level are: (1) existing IBM based graphics capture software is an adequate and economical means of entry of schematic and block diagram data for present and anticipated electronic systems for Space Station; (2) connectivity data from the aforementioned system may be incorporated into the envisioned Space Station Data Base with modest effort; (3) graphics and connectivity data captured on the IBM based system may be exported to the VAX network in a simple and direct fashion; (4) graphics data may be displayed site-wide on VT-125 terminals and lookalikes; (5) graphics hard-copy may be produced site-wide on various dot-matrix printers; and (6) the system may provide integrated engineering services at both the engineering and engineering management level.

Light field rendering with omni-directional camera

NASA Astrophysics Data System (ADS)

Todoroki, Hiroshi; Saito, Hideo

2003-06-01

This paper presents an approach to capture visual appearance of a real environment such as an interior of a room. We propose the method for generating arbitrary viewpoint images by building light field with the omni-directional camera, which can capture the wide circumferences. Omni-directional camera used in this technique is a special camera with the hyperbolic mirror in the upper part of a camera, so that we can capture luminosity in the environment in the range of 360 degree of circumferences in one image. We apply the light field method, which is one technique of Image-Based-Rendering(IBR), for generating the arbitrary viewpoint images. The light field is a kind of the database that records the luminosity information in the object space. We employ the omni-directional camera for constructing the light field, so that we can collect many view direction images in the light field. Thus our method allows the user to explore the wide scene, that can acheive realistic representation of virtual enviroment. For demonstating the proposed method, we capture image sequence in our lab's interior environment with an omni-directional camera, and succesfully generate arbitray viewpoint images for virual tour of the environment.

Instant replay.

PubMed

Rosenthal, David I

2013-06-01

With widespread adoption of electronic health records (EHRs) and electronic clinical documentation, health care organizations now have greater faculty to review clinical data and evaluate the efficacy of quality improvement efforts. Unfortunately, I believe there is a fundamental gap between actual health care delivery and what we document in the current EHR systems. This process of capturing the patient encounter, which I'll refer to as transcription, is prone to significant data loss due to inadequate methods of data capture, multiple points of view, and bias and subjectivity in the transcriptional process. Our current EHR, text-based clinical documentation systems are lossy abstractions - one sided accounts of what take place between patients and providers. Our clinical notes contain the breadcrumbs of relationships, conversations, physical exams, and procedures but often lack the ability to capture the form, the emotions, the images, the nonverbal communication, and the actual narrative of interactions between human beings. I believe that a video record, in conjunction with objective transcriptional services and other forms of data capture, may provide a closer approximation to the truth of health care delivery and may be a valuable tool for healthcare improvement. Copyright © 2013 Elsevier Inc. All rights reserved.

Coded aperture solution for improving the performance of traffic enforcement cameras

NASA Astrophysics Data System (ADS)

Masoudifar, Mina; Pourreza, Hamid Reza

2016-10-01

A coded aperture camera is proposed for automatic license plate recognition (ALPR) systems. It captures images using a noncircular aperture. The aperture pattern is designed for the rapid acquisition of high-resolution images while preserving high spatial frequencies of defocused regions. It is obtained by minimizing an objective function, which computes the expected value of perceptual deblurring error. The imaging conditions and camera sensor specifications are also considered in the proposed function. The designed aperture improves the depth of field (DoF) and subsequently ALPR performance. The captured images can be directly analyzed by the ALPR software up to a specific depth, which is 13 m in our case, though it is 11 m for the circular aperture. Moreover, since the deblurring results of images captured by our aperture yield fewer artifacts than those captured by the circular aperture, images can be first deblurred and then analyzed by the ALPR software. In this way, the DoF and recognition rate can be improved at the same time. Our case study shows that the proposed camera can improve the DoF up to 17 m while it is limited to 11 m in the conventional aperture.

Advanced Technologies for Touchless Fingerprint Recognition

NASA Astrophysics Data System (ADS)

Parziale, Giuseppe; Chen, Yi

A fingerprint capture consists of touching or rolling a finger onto a rigid sensing surface. During this act, the elastic skin of the finger deforms. The quantity and direction of the pressure applied by the user, the skin conditions, and the projection of an irregular 3D object (the finger) onto a 2D flat plane introduce distortions, noise, and inconsistencies on the captured fingerprint image. Due to these negative effects, the representation of the same fingerprint changes every time the finger is placed on the sensor platen, increasing the complexity of the fingerprint matching and representing a negative influence on the system performance. Recently, a new approach to capture fingerprints has been proposed. This approach, referred to as touchless or contactless fingerprinting, tries to overcome the above-cited problems. Because of the lack of contact between the finger and any rigid surface, the skin does not deform during the capture and the repeatability of the measure is quiet ensured. However, this technology introduces new challenges. Finger positioning, illumination, image contrast adjustment, data format compatibility, and user convenience are key in the design and development of touchless fingerprint systems. In addition, vulnerability to spoofing attacks of some touchless fingerprint systems must be addressed.

Fluid Surface Deformation by Objects in the Cheerios Effect

NASA Astrophysics Data System (ADS)

Nguyen, Khoi; Miller, Michael; Mandre, Shreyas; Mandre Lab Team

2012-11-01

Small objects floating on a fluid/air interface deform of the surface depending on material surface properties, density, and geometry. These objects attract each other through capillary interactions, a phenomenon dubbed the ``cheerios effect.'' The attractive force and torque exerted on these objects by the interface can be estimated if the meniscus deformation is known. In addition, the floating objects can also rotate due to such an interaction. We present a series of experiments focused on visualizing the the motions of the floating objects and the deformation of the interface. The experiments involve thin laser-cut acrylic pieces attracting each other on water in a large glass petri dish and a camera set-up to capture the process. Furthermore, optical distortion of a grid pattern is used to visualize the water surface deformation near the edge of the objects. This study of the deformation of the water surface around a floating object, of the attractive/repulsive forces, and of post-contact rotational dynamics are potentially instrumental in the study of colloidal self-assembly.

Design of a haptic device with grasp and push-pull force feedback for a master-slave surgical robot.

PubMed

Hu, Zhenkai; Yoon, Chae-Hyun; Park, Samuel Byeongjun; Jo, Yung-Ho

2016-07-01

We propose a portable haptic device providing grasp (kinesthetic) and push-pull (cutaneous) sensations for optical-motion-capture master interfaces. Although optical-motion-capture master interfaces for surgical robot systems can overcome the stiffness, friction, and coupling problems of mechanical master interfaces, it is difficult to add haptic feedback to an optical-motion-capture master interface without constraining the free motion of the operator's hands. Therefore, we utilized a Bowden cable-driven mechanism to provide the grasp and push-pull sensation while retaining the free hand motion of the optical-motion capture master interface. To evaluate the haptic device, we construct a 2-DOF force sensing/force feedback system. We compare the sensed force and the reproduced force of the haptic device. Finally, a needle insertion test was done to evaluate the performance of the haptic interface in the master-slave system. The results demonstrate that both the grasp force feedback and the push-pull force feedback provided by the haptic interface closely matched with the sensed forces of the slave robot. We successfully apply our haptic interface in the optical-motion-capture master-slave system. The results of the needle insertion test showed that our haptic feedback can provide more safety than merely visual observation. We develop a suitable haptic device to produce both kinesthetic grasp force feedback and cutaneous push-pull force feedback. Our future research will include further objective performance evaluations of the optical-motion-capture master-slave robot system with our haptic interface in surgical scenarios.

Does conspicuity enhance distraction? Saliency and eye landing position when searching for objects.

PubMed

Foulsham, Tom; Underwood, Geoffrey

2009-06-01

While visual saliency may sometimes capture attention, the guidance of eye movements in search is often dominated by knowledge of the target. How is the search for an object influenced by the saliency of an adjacent distractor? Participants searched for a target amongst an array of objects, with distractor saliency having an effect on response time and on the speed at which targets were found. Saliency did not predict the order in which objects in target-absent trials were fixated. The within-target landing position was distributed around a modal position close to the centre of the object. Saliency did not affect this position, the latency of the initial saccade, or the likelihood of the distractor being fixated, suggesting that saliency affects the allocation of covert attention and not just eye movements.

Large Pilot Scale Testing of Linde/BASF Post-Combustion CO 2 Capture Technology at the Abbott Coal-Fired Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Brien, Kevin C.

The work summarized in this report is the first step towards a project that will re-train and create jobs for personnel in the coal industry and continue regional economic development to benefit regions impacted by previous downturns. The larger project is aimed at capturing ~300 tons/day (272 metric tonnes/day) CO 2 at a 90% capture rate from existing coal- fired boilers at the Abbott Power Plant on the campus of University of Illinois (UI). It will employ the Linde-BASF novel amine-based advanced CO 2 capture technology, which has already shown the potential to be cost-effective, energy efficient and compact atmore » the 0.5-1.5 MWe pilot scales. The overall objective of the project is to design and install a scaled-up system of nominal 15 MWe size, integrate it with the Abbott Power Plant flue gas, steam and other utility systems, and demonstrate the viability of continuous operation under realistic conditions with high efficiency and capacity. The project will also begin to build a workforce that understands how to operate and maintain the capture plants by including students from regional community colleges and universities in the operation and evaluation of the capture system. This project will also lay the groundwork for follow-on projects that pilot utilization of the captured CO 2 from coal-fired power plants. The net impact will be to demonstrate a replicable means to (1) use a standardized procedure to evaluate power plants for their ability to be retrofitted with a pilot capture unit; (2) design and construct reliable capture systems based on the Linde-BASF technology; (3) operate and maintain these systems; (4) implement training programs with local community colleges and universities to establish a workforce to operate and maintain the systems; and (5) prepare to evaluate at the large pilot scale level various methods to utilize the resulting captured CO 2. Towards the larger project goal, the UI-led team, together with Linde, has completed a preliminary design for the carbon capture pilot plant with basic engineering and cost estimates, established permitting needs, identified approaches to address Environmental, Health, and Safety concerns related to pilot plant installation and operation, developed approaches for long-term use of the captured carbon, and established strategies for workforce development and job creation that will re-train coal operators to operate carbon capture plants. This report describes Phase I accomplishments and demonstrates that the project team is well-prepared for full implementation of Phase 2, to design, build, and operate the carbon capture pilot plant.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barack, Leor; Department of Mathematics, University of Southampton, Southampton, SO17 1BJ; Cutler, Curt

Captures of compact objects (COs) by massive black holes (MBHs) in galactic nuclei will be an important source for LISA, the proposed space-based gravitational wave (GW) detector. However, a large fraction of captures will not be individually resolvable - either because they are too distant, have unfavorable orientation, or have too many years to go before final plunge - and so will constitute a source of 'confusion noise', obscuring other types of sources. In this paper we estimate the shape and overall magnitude of the GW background energy spectrum generated by CO captures. This energy spectrum immediately translates to amore » spectral density S{sub h}{sup capt}(f) for the amplitude of capture-generated GWs registered by LISA. The overall magnitude of S{sub h}{sup capt}(f) is linear in the CO capture rates, which are rather uncertain; therefore we present results for a plausible range of rates. S{sub h}{sup capt}(f) includes the contributions from both resolvable and unresolvable captures, and thus represents an upper limit on the confusion noise level. We then estimate what fraction of S{sub h}{sup capt}(f) is due to unresolvable sources and hence constitutes confusion noise. We find that almost all of the contribution to S{sub h}{sup capt}(f) coming from white dwarf and neutron star captures, and at least {approx}30% of the contribution from black hole captures, is from sources that cannot be individually resolved. Nevertheless, we show that the impact of capture confusion noise on the total LISA noise curve ranges from insignificant to modest, depending on the rates. Capture rates at the high end of estimated ranges would raise LISA's overall (effective) noise level [fS{sub h}{sup eff}(f)]{sup 1/2} by at most a factor {approx}2 in the frequency range 1-10 mHz, where LISA is most sensitive. While this slightly elevated noise level would somewhat decrease LISA's sensitivity to other classes of sources, we argue that, overall, this would be a pleasant problem for LISA to have: It would also imply that detection rates for CO captures were at nearly their maximum possible levels (given LISA's baseline design and the level of confusion noise from galactic white dwarf binaries). This paper also contains, as intermediate steps, several results that should be useful in further studies of LISA capture sources, including (i) a calculation of the total GW energy output from generic inspirals of COs into Kerr MBHs (ii) an approximate GW energy spectrum for a typical capture, and (iii) an estimate showing that in the population of detected capture sources, roughly half the white dwarfs and a third of the neutron stars will be detected when they still have > or approx. 10 years to go before final plunge.« less

Spatial and temporal Brook Trout density dynamics: Implications for conservation, management, and monitoring

USGS Publications Warehouse

Wagner, Tyler; Jefferson T. Deweber,; Jason Detar,; Kristine, David; John A. Sweka,

2014-01-01

Many potential stressors to aquatic environments operate over large spatial scales, prompting the need to assess and monitor both site-specific and regional dynamics of fish populations. We used hierarchical Bayesian models to evaluate the spatial and temporal variability in density and capture probability of age-1 and older Brook Trout Salvelinus fontinalis from three-pass removal data collected at 291 sites over a 37-year time period (1975–2011) in Pennsylvania streams. There was high between-year variability in density, with annual posterior means ranging from 2.1 to 10.2 fish/100 m2; however, there was no significant long-term linear trend. Brook Trout density was positively correlated with elevation and negatively correlated with percent developed land use in the network catchment. Probability of capture did not vary substantially across sites or years but was negatively correlated with mean stream width. Because of the low spatiotemporal variation in capture probability and a strong correlation between first-pass CPUE (catch/min) and three-pass removal density estimates, the use of an abundance index based on first-pass CPUE could represent a cost-effective alternative to conducting multiple-pass removal sampling for some Brook Trout monitoring and assessment objectives. Single-pass indices may be particularly relevant for monitoring objectives that do not require precise site-specific estimates, such as regional monitoring programs that are designed to detect long-term linear trends in density.

Attention is captured by distractors that uniquely correspond to controlled objects: an analysis of movement trajectories.

PubMed

Miles, James D; Proctor, Robert W

2015-04-01

When reaching for a particular target, movements tend to deviate toward distractors. Previously, we have shown that cursor movements deviate to a greater degree toward distractors when the distractor color corresponds to that of the cursor and the target color does not, even when this relationship is task-irrelevant (Miles & Proctor, 2011). In the present study, we investigated whether this correspondence effect is due to attention capture or to the activation of responses based on the task response rules associated with the colors of the distractor and target (viz. a flanker effect). Participants moved a central rectangular cursor to an upper left or upper right location, depending on the cursor color. The colors of the target (correct response side) and distractor (incorrect response side) were independent from one another and were either corresponding or noncorresponding with respect to the cursor color. In Experiment 1, reaction times were delayed when the distractor color corresponded to that of the cursor, but only when the target color did not correspond to the cursor color. No color correspondence effect was found for movement trajectories or movement times. However, in Experiment 2, when responses were time-pressured, initial movements toward the distractor were much more common when the distractor color exclusively corresponded to the cursor color. On the basis of these results, we argue that attention capture best explains the increased tendency to move a controlled object to a distractor that uniquely shares its features.

Early Design Choices: Capture, Model, Integrate, Analyze, Simulate

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2004-01-01

I. Designs are constructed incrementally to meet requirements and solve problems: a) Requirements types: objectives, scenarios, constraints, ilities. etc. b) Problem/issue types: risk/safety, cost/difficulty, interaction, conflict, etc. II. Capture requirements, problems and solutions: a) Collect design and analysis products and make them accessible for integration and analysis; b) Link changes in design requirements, problems and solutions; and c) Harvest design data for design models and choice structures. III. System designs are constructed by multiple groups designing interacting subsystems a) Diverse problems, choice criteria, analysis methods and point solutions. IV. Support integration and global analysis of repercussions: a) System implications of point solutions; b) Broad analysis of interactions beyond totals of mass, cost, etc.

Real-time image sequence segmentation using curve evolution

NASA Astrophysics Data System (ADS)

Zhang, Jun; Liu, Weisong

2001-04-01

In this paper, we describe a novel approach to image sequence segmentation and its real-time implementation. This approach uses the 3D structure tensor to produce a more robust frame difference signal and uses curve evolution to extract whole objects. Our algorithm is implemented on a standard PC running the Windows operating system with video capture from a USB camera that is a standard Windows video capture device. Using the Windows standard video I/O functionalities, our segmentation software is highly portable and easy to maintain and upgrade. In its current implementation on a Pentium 400, the system can perform segmentation at 5 frames/sec with a frame resolution of 160 by 120.

Automated Meteor Detection by All-Sky Digital Camera Systems

NASA Astrophysics Data System (ADS)

Suk, Tomáš; Šimberová, Stanislava

2017-12-01

We have developed a set of methods to detect meteor light traces captured by all-sky CCD cameras. Operating at small automatic observatories (stations), these cameras create a network spread over a large territory. Image data coming from these stations are merged in one central node. Since a vast amount of data is collected by the stations in a single night, robotic storage and analysis are essential to processing. The proposed methodology is adapted to data from a network of automatic stations equipped with digital fish-eye cameras and includes data capturing, preparation, pre-processing, analysis, and finally recognition of objects in time sequences. In our experiments we utilized real observed data from two stations.

Objective analysis of image quality of video image capture systems

NASA Astrophysics Data System (ADS)

Rowberg, Alan H.

1990-07-01

As Picture Archiving and Communication System (PACS) technology has matured, video image capture has become a common way of capturing digital images from many modalities. While digital interfaces, such as those which use the ACR/NEMA standard, will become more common in the future, and are preferred because of the accuracy of image transfer, video image capture will be the dominant method in the short term, and may continue to be used for some time because of the low cost and high speed often associated with such devices. Currently, virtually all installed systems use methods of digitizing the video signal that is produced for display on the scanner viewing console itself. A series of digital test images have been developed for display on either a GE CT9800 or a GE Signa MRI scanner. These images have been captured with each of five commercially available image capture systems, and the resultant images digitally transferred on floppy disk to a PC1286 computer containing Optimast' image analysis software. Here the images can be displayed in a comparative manner for visual evaluation, in addition to being analyzed statistically. Each of the images have been designed to support certain tests, including noise, accuracy, linearity, gray scale range, stability, slew rate, and pixel alignment. These image capture systems vary widely in these characteristics, in addition to the presence or absence of other artifacts, such as shading and moire pattern. Other accessories such as video distribution amplifiers and noise filters can also add or modify artifacts seen in the captured images, often giving unusual results. Each image is described, together with the tests which were performed using them. One image contains alternating black and white lines, each one pixel wide, after equilibration strips ten pixels wide. While some systems have a slew rate fast enough to track this correctly, others blur it to an average shade of gray, and do not resolve the lines, or give horizontal or vertical streaking. While many of these results are significant from an engineering standpoint alone, there are clinical implications and some anatomy or pathology may not be visualized if an image capture system is used improperly.

A method to quantify movement activity of groups of animals using automated image analysis

NASA Astrophysics Data System (ADS)

Xu, Jianyu; Yu, Haizhen; Liu, Ying

2009-07-01

Most physiological and environmental changes are capable of inducing variations in animal behavior. The behavioral parameters have the possibility to be measured continuously in-situ by a non-invasive and non-contact approach, and have the potential to be used in the actual productions to predict stress conditions. Most vertebrates tend to live in groups, herds, flocks, shoals, bands, packs of conspecific individuals. Under culture conditions, the livestock or fish are in groups and interact on each other, so the aggregate behavior of the group should be studied rather than that of individuals. This paper presents a method to calculate the movement speed of a group of animal in a enclosure or a tank denoted by body length speed that correspond to group activity using computer vision technique. Frame sequences captured at special time interval were subtracted in pairs after image segmentation and identification. By labeling components caused by object movement in difference frame, the projected area caused by the movement of every object in the capture interval was calculated; this projected area was divided by the projected area of every object in the later frame to get body length moving distance of each object, and further could obtain the relative body length speed. The average speed of all object can well respond to the activity of the group. The group activity of a tilapia (Oreochromis niloticus) school to high (2.65 mg/L) levels of unionized ammonia (UIA) concentration were quantified based on these methods. High UIA level condition elicited a marked increase in school activity at the first hour (P<0.05) exhibiting an avoidance reaction (trying to flee from high UIA condition), and then decreased gradually.

Representations of everyday life: a proposal for capturing social values from the Marxist perspective of knowledge production.

PubMed

Soares, Cássia Baldini; Santos, Vilmar Ezequiel Dos; Campos, Célia Maria Sivalli; Lachtim, Sheila Aparecida Ferreira; Campos, Fernanda Cristina

2011-12-01

We propose from the Marxist perspective of the construction of knowledge, a theoretical and methodological framework for understanding social values by capturing everyday representations. We assume that scientific research brings together different dimensions: epistemological, theoretical and methodological that consistently to the other instances, proposes a set of operating procedures and techniques for capturing and analyzing the reality under study in order to expose the investigated object. The study of values reveals the essentiality of the formation of judgments and choices, there are values that reflect the dominant ideology, spanning all social classes, but there are values that reflect class interests, these are not universal, they are formed in relationships and social activities. Basing on the Marxist theory of consciousness, representations are discursive formulations of everyday life - opinion or conviction - issued by subjects about their reality, being a coherent way of understanding and exposure social values: focus groups show is suitable for grasping opinions while interviews show potential to expose convictions.

Optimal scheduling and its Lyapunov stability for advanced load-following energy plants with CO 2 capture

DOE PAGES

Bankole, Temitayo; Jones, Dustin; Bhattacharyya, Debangsu; ...

2017-11-03

In this study, a two-level control methodology consisting of an upper-level scheduler and a lower-level supervisory controller is proposed for an advanced load-following energy plant with CO 2 capture. With the use of an economic objective function that considers fluctuation in electricity demand and price at the upper level, optimal scheduling of energy plant electricity production and carbon capture with respect to several carbon tax scenarios is implemented. The optimal operational profiles are then passed down to corresponding lower-level supervisory controllers designed using a methodological approach that balances control complexity with performance. Finally, it is shown how optimal carbon capturemore » and electricity production rate profiles for an energy plant such as the integrated gasification combined cycle (IGCC) plant are affected by electricity demand and price fluctuations under different carbon tax scenarios. As a result, the paper also presents a Lyapunov stability analysis of the proposed scheme.« less

Octopus: A Design Methodology for Motion Capture Wearables

PubMed Central

2017-01-01

Human motion capture (MoCap) is widely recognised for its usefulness and application in different fields, such as health, sports, and leisure; therefore, its inclusion in current wearables (MoCap-wearables) is increasing, and it may be very useful in a context of intelligent objects interconnected with each other and to the cloud in the Internet of Things (IoT). However, capturing human movement adequately requires addressing difficult-to-satisfy requirements, which means that the applications that are possible with this technology are held back by a series of accessibility barriers, some technological and some regarding usability. To overcome these barriers and generate products with greater wearability that are more efficient and accessible, factors are compiled through a review of publications and market research. The result of this analysis is a design methodology called Octopus, which ranks these factors and schematises them. Octopus provides a tool that can help define design requirements for multidisciplinary teams, generating a common framework and offering a new method of communication between them. PMID:28809786

Orbital maneuvering end effectors

NASA Technical Reports Server (NTRS)

Myers, W. Neill (Inventor); Forbes, John C. (Inventor); Barnes, Wayne L. (Inventor)

1986-01-01

This invention relates to an end effector device for grasping and maneuvering objects such as berthing handles of a space telescope. The device includes a V-shaped capture window defined as inclined surfaces in parallel face plates which converge toward a retainer recess in which the handle is retained. A pivotal finger (30) meshes with a pair of pivoted fingers which rotate in counterrotation. The fingers rotate to pull a handle within the capture window into recess where latches lock handle in the recess. To align the capture window, plates may be cocked plus or minus five degrees on base. Drive means is included in the form of a motor coupled with a harmonic drive speed reducer, which provides for slow movement of the fingers at a high torque so that large articles may be handled. Novelty of the invention is believed to reside in the combined intermeshing finger structure, drive means and the harmonic drive speed reducer, which features provide the required maneuverability and strength.

Forecasting Lightning Threat Using WRF Proxy Fields

NASA Technical Reports Server (NTRS)

McCaul, E. W., Jr.

2010-01-01

Objectives: Given that high-resolution WRF forecasts can capture the character of convective outbreaks, we seek to: 1. Create WRF forecasts of LTG threat (1-24 h), based on 2 proxy fields from explicitly simulated convection: - graupel flux near -15 C (captures LTG time variability) - vertically integrated ice (captures LTG threat area). 2. Calibrate each threat to yield accurate quantitative peak flash rate densities. 3. Also evaluate threats for areal coverage, time variability. 4. Blend threats to optimize results. 5. Examine sensitivity to model mesh, microphysics. Methods: 1. Use high-resolution 2-km WRF simulations to prognose convection for a diverse series of selected case studies. 2. Evaluate graupel fluxes; vertically integrated ice (VII). 3. Calibrate WRF LTG proxies using peak total LTG flash rate densities from NALMA; relationships look linear, with regression line passing through origin. 4. Truncate low threat values to make threat areal coverage match NALMA flash extent density obs. 5. Blend proxies to achieve optimal performance 6. Study CAPS 4-km ensembles to evaluate sensitivities.

Optimal scheduling and its Lyapunov stability for advanced load-following energy plants with CO 2 capture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bankole, Temitayo; Jones, Dustin; Bhattacharyya, Debangsu

In this study, a two-level control methodology consisting of an upper-level scheduler and a lower-level supervisory controller is proposed for an advanced load-following energy plant with CO 2 capture. With the use of an economic objective function that considers fluctuation in electricity demand and price at the upper level, optimal scheduling of energy plant electricity production and carbon capture with respect to several carbon tax scenarios is implemented. The optimal operational profiles are then passed down to corresponding lower-level supervisory controllers designed using a methodological approach that balances control complexity with performance. Finally, it is shown how optimal carbon capturemore » and electricity production rate profiles for an energy plant such as the integrated gasification combined cycle (IGCC) plant are affected by electricity demand and price fluctuations under different carbon tax scenarios. As a result, the paper also presents a Lyapunov stability analysis of the proposed scheme.« less

Design and development of an upper extremity motion capture system for a rehabilitation robot.

PubMed

Nanda, Pooja; Smith, Alan; Gebregiorgis, Adey; Brown, Edward E

2009-01-01

Human robot interaction is a new and rapidly growing field and its application in the realm of rehabilitation and physical care is a major focus area of research worldwide. This paper discusses the development and implementation of a wireless motion capture system for the human arm which can be used for physical therapy or real-time control of a robotic arm, among many other potential applications. The system is comprised of a mechanical brace with rotary potentiometers inserted at the different joints to capture position data. It also contains surface electrodes which acquire electromyographic signals through the CleveMed BioRadio device. The brace interfaces with a software subsystem which displays real time data signals. The software includes a 3D arm model which imitates the actual movement of a subject's arm under testing. This project began as part of the Rochester Institute of Technology's Undergraduate Multidisciplinary Senior Design curriculum and has been integrated into the overall research objectives of the Biomechatronic Learning Laboratory.

An adaptive strategy for reducing Feral Cat predation on endangered hawaiian birds

USGS Publications Warehouse

Hess, S.C.; Banko, P.C.; Hansen, H.

2009-01-01

Despite the long history of Feral Cats Felis catus in Hawai'i, there has been little research to provide strategies to improve control programmes and reduce depredation on endangered species. Our objective Was to develop a predictive model to determine how landscape features on Mauna Kea, such as habitat, elevation, and proximity to roads, may affect the number of Feral Cats captured at each trap. We used log-link generalized linear models and QAIC c model ranking criteria to determine the effect of these factors. We found that The number of cats captured per trap Was related to effort, habitat type, and Whether traps Were located on The West or North Slope of Mauna Kea. We recommend an adaptive management strategy to minimize trapping interference by non-target Small Indian Mongoose Herpestes auropunctatus with toxicants, to focus trapping efforts in M??mane Sophora chrysophylla habitat on the West slope of Mauna Kea, and to cluster traps near others that have previously captured multiple cats.

Capture-recapture studies for multiple strata including non-markovian transitions

USGS Publications Warehouse

Brownie, C.; Hines, J.E.; Nichols, J.D.; Pollock, K.H.; Hestbeck, J.B.

1993-01-01

We consider capture-recapture studies where release and recapture data are available from each of a number of strata on every capture occasion. Strata may, for example, be geographic locations or physiological states. Movement of animals among strata occurs with unknown probabilities, and estimation of these unknown transition probabilities is the objective. We describe a computer routine for carrying out the analysis under a model that assumes Markovian transitions and under reduced parameter versions of this model. We also introduce models that relax the Markovian assumption and allow 'memory' to operate (i.e., allow dependence of the transition probabilities on the previous state). For these models, we sugg st an analysis based on a conditional likelihood approach. Methods are illustrated with data from a large study on Canada geese (Branta canadensis) banded in three geographic regions. The assumption of Markovian transitions is rejected convincingly for these data, emphasizing the importance of the more general models that allow memory.

Octopus: A Design Methodology for Motion Capture Wearables.

PubMed

Marin, Javier; Blanco, Teresa; Marin, Jose J

2017-08-15

Human motion capture (MoCap) is widely recognised for its usefulness and application in different fields, such as health, sports, and leisure; therefore, its inclusion in current wearables (MoCap-wearables) is increasing, and it may be very useful in a context of intelligent objects interconnected with each other and to the cloud in the Internet of Things (IoT). However, capturing human movement adequately requires addressing difficult-to-satisfy requirements, which means that the applications that are possible with this technology are held back by a series of accessibility barriers, some technological and some regarding usability. To overcome these barriers and generate products with greater wearability that are more efficient and accessible, factors are compiled through a review of publications and market research. The result of this analysis is a design methodology called Octopus, which ranks these factors and schematises them. Octopus provides a tool that can help define design requirements for multidisciplinary teams, generating a common framework and offering a new method of communication between them.

Image stitching and image reconstruction of intestines captured using radial imaging capsule endoscope

NASA Astrophysics Data System (ADS)

Ou-Yang, Mang; Jeng, Wei-De; Wu, Yin-Yi; Dung, Lan-Rong; Wu, Hsien-Ming; Weng, Ping-Kuo; Huang, Ker-Jer; Chiu, Luan-Jiau

2012-05-01

This study investigates image processing using the radial imaging capsule endoscope (RICE) system. First, an experimental environment is established in which a simulated object has a shape that is similar to a cylinder, such that a triaxial platform can be used to push the RICE into the sample and capture radial images. Then four algorithms (mean absolute error, mean square error, Pearson correlation coefficient, and deformation processing) are used to stitch the images together. The Pearson correlation coefficient method is the most effective algorithm because it yields the highest peak signal-to-noise ratio, higher than 80.69 compared to the original image. Furthermore, a living animal experiment is carried out. Finally, the Pearson correlation coefficient method and vector deformation processing are used to stitch the images that were captured in the living animal experiment. This method is very attractive because unlike the other methods, in which two lenses are required to reconstruct the geometrical image, RICE uses only one lens and one mirror.

Demonstrating Change with Astronaut Photography Using Object Based Image Analysis

NASA Technical Reports Server (NTRS)

Hollier, Andi; Jagge, Amy

2017-01-01

Every day, hundreds of images of Earth flood the Crew Earth Observations database as astronauts use hand held digital cameras to capture spectacular frames from the International Space Station. The variety of resolutions and perspectives provide a template for assessing land cover change over decades. We will focus on urban growth in the second fastest growing city in the nation, Houston, TX, using Object-Based Image Analysis. This research will contribute to the land change science community, integrated resource planning, and monitoring of the rapid rate of urban sprawl.

Image BOSS: a biomedical object storage system

NASA Astrophysics Data System (ADS)

Stacy, Mahlon C.; Augustine, Kurt E.; Robb, Richard A.

1997-05-01

Researchers using biomedical images have data management needs which are oriented perpendicular to clinical PACS. The image BOSS system is designed to permit researchers to organize and select images based on research topic, image metadata, and a thumbnail of the image. Image information is captured from existing images in a Unix based filesystem, stored in an object oriented database, and presented to the user in a familiar laboratory notebook metaphor. In addition, the ImageBOSS is designed to provide an extensible infrastructure for future content-based queries directly on the images.

Visual control of prey-capture flight in dragonflies.

PubMed

Olberg, Robert M

2012-04-01

Interacting with a moving object poses a computational problem for an animal's nervous system. This problem has been elegantly solved by the dragonfly, a formidable visual predator on flying insects. The dragonfly computes an interception flight trajectory and steers to maintain it during its prey-pursuit flight. This review summarizes current knowledge about pursuit behavior and neurons thought to control interception in the dragonfly. When understood, this system has the potential for explaining how a small group of neurons can control complex interactions with moving objects. Copyright © 2011 Elsevier Ltd. All rights reserved.

Combined holography and thermography in a single sensor through image-plane holography at thermal infrared wavelengths.

PubMed

Georges, Marc P; Vandenrijt, Jean-François; Thizy, Cédric; Alexeenko, Igor; Pedrini, Giancarlo; Vollheim, Birgit; Lopez, Ion; Jorge, Iagoba; Rochet, Jonathan; Osten, Wolfgang

2014-10-20

Holographic interferometry in the thermal wavelengths range, combining a CO(2) laser and digital hologram recording with a microbolometer array based camera, allows simultaneously capturing temperature and surface shape information about objects. This is due to the fact that the holograms are affected by the thermal background emitted by objects at room temperature. We explain the setup and the processing of data which allows decoupling the two types of information. This natural data fusion can be advantageously used in a variety of nondestructive testing applications.

Control design for future agile fighters

NASA Technical Reports Server (NTRS)

Murphy, Patrick C.; Davidson, John B.

1991-01-01

The CRAFT control design methodology is presented. CRAFT stands for the design objectives addressed, namely, Control power, Robustness, Agility, and Flying Qualities Tradeoffs. The approach combines eigenspace assignment, which allows for direct specification of eigenvalues and eigenvectors, and a graphical approach for representing control design metrics that captures numerous design goals in one composite illustration. The methodology makes use of control design metrics from four design objective areas, namely, control power, robustness, agility, and flying qualities. An example of the CRAFT methodology as well as associated design issues are presented.

Books Worth Reading: Engaging Material--Comics in the Classroom

ERIC Educational Resources Information Center

Hall, Justin R.

2011-01-01

Comic books and graphic novels are one of the newest fully fledged art forms, a vibrant, hybrid medium birthed in America and brimming with all the wildly experimental vigor of youth. Traditionally associated with children's narratives and the object of condescension and ridicule, they have only recently captured academic attention. What is…

Determining landscape extent for succession and disturbance simulation modeling

Treesearch

Eva C. Karau; Robert E. Keane

2007-01-01

Dividing regions into manageable landscape units presents special problems in landscape ecology and land management. Ideally, a landscape should be large enough to capture a broad range of vegetation, environmental and disturbance dynamics, but small enough to be useful for focused management objectives. The purpose of this study was to determine the optimal landscape...

Reflective Object: Capturing the Look of Metal

ERIC Educational Resources Information Center

Rosen, Stephanie

2012-01-01

Very often, secondary art students feel most comfortable drawing from photographs or images they find in books or magazines. Although the author does find these drawing experiences play an important role in the introduction to drawing, and that these images keep students interested in art, it is important to encourage lessons in drawing from life.…

Assessing God Locus of Control as a Factor in College Students' Alcohol Use and Sexual Behavior

ERIC Educational Resources Information Center

Moore, Erin W.

2014-01-01

Objectives: This study explored God locus of control beliefs (ie, God's control over behavior) regarding their influence on alcohol use and sexual behavior as an alternative religiosity measure to religious behaviors, which does not capture perceived influence of religiosity. Additionally, demographic differences in religious beliefs were…

AQUEOUS AND VAPOR PHASE MERCURY SORPTION BY INORGANIC OXIDE MATERIALS FUNCTIONALIZED WITH THIOLS AND POLY-THIOLS

EPA Science Inventory

The objective of the study is the development of sorbents where the sorption sites are highly accessible for the capture of mercury from aqueous and vapor streams. Only a small fraction of the equilibrium capacity is utilized for a sorbent in applications involving short residenc...

Salience Is Only Briefly Represented: Evidence from Probe-Detection Performance

ERIC Educational Resources Information Center

Donk, Mieke; Soesman, Leroy

2010-01-01

Salient objects in the visual field tend to capture attention. The present study aimed to examine the time-course of salience effects using a probe-detection task. Eight experiments investigated how the salience of different orientation singletons affected probe reaction time as a function of stimulus onset asynchrony (SOA) between the…

Dynamic Sustainability: Practitioners' Perspectives on Housing First Implementation Challenges and Model Fidelity Over Time

ERIC Educational Resources Information Center

Stergiopoulos, Vicky; Zerger, Suzanne; Jeyaratnam, Jeyagobi; Connelly, Jolynn; Kruk, Katherine; O'Campo, Patricia; Hwang, Stephen

2016-01-01

Objectives: Although Housing First (HF) is a popular evidence-based intervention for persons experiencing homelessness and mental illness, research exploring its sustainability over time is scant. This mixed methods study captures practitioners' perspectives on key shifts in implementation of Housing First in a large urban center, and factors…

Captures of boll weevils (Coleoptera: Curculionidae) in relation to trap orientation and distance from brush lines

USDA-ARS?s Scientific Manuscript database

Eradication programs for the boll weevil (Anthonomus grandis Boheman) rely on pheromone-baited traps to trigger insecticide treatments and monitor program progress. A key objective of monitoring in these programs is the timely detection of incipient weevil populations to limit or prevent re-infestat...

Exploring Mobile Affordances in the Digital Classroom

ERIC Educational Resources Information Center

Parsons, David; Thomas, Herbert; Wishart, Jocelyn

2016-01-01

This article reports on a survey of teachers undertaking a postgraduate applied practice certificate in digital and collaborative learning. The survey was intended to capture how mobile learning was currently being used by the teachers both on the course and in their own classrooms. The objective was to investigate to what extent mobile learning…

The Social Studies Wars, Now and Then

ERIC Educational Resources Information Center

Evans, Ronald W.

2006-01-01

The objectives of this article are, first, to capture the main camps and patterns of the "social studies wars" since the beginning of the twentieth century and, second, to describe critical episodes from that long history that will help put the contemporary controversies in historical perspective. Here, the author features six critical episodes…

Forest Management Under Uncertainty for Multiple Bird Population Objectives

Treesearch

Clinton T. Moore; W. Todd Plummer; Michael J. Conroy

2005-01-01

We advocate adaptive programs of decision making and monitoring for the management of forest birds when responses by populations to management, and particularly management trade-offs among populations, are uncertain. Models are necessary components of adaptive management. Under this approach, uncertainty about the behavior of a managed system is explicitly captured in...

Fusion of light-field and photogrammetric surface form data

NASA Astrophysics Data System (ADS)

Sims-Waterhouse, Danny; Piano, Samanta; Leach, Richard K.

2017-08-01

Photogrammetry based systems are able to produce 3D reconstructions of an object given a set of images taken from different orientations. In this paper, we implement a light-field camera within a photogrammetry system in order to capture additional depth information, as well as the photogrammetric point cloud. Compared to a traditional camera that only captures the intensity of the incident light, a light-field camera also provides angular information for each pixel. In principle, this additional information allows 2D images to be reconstructed at a given focal plane, and hence a depth map can be computed. Through the fusion of light-field and photogrammetric data, we show that it is possible to improve the measurement uncertainty of a millimetre scale 3D object, compared to that from the individual systems. By imaging a series of test artefacts from various positions, individual point clouds were produced from depth-map information and triangulation of corresponding features between images. Using both measurements, data fusion methods were implemented in order to provide a single point cloud with reduced measurement uncertainty.

Supporting open collaboration in science through explicit and linked semantic description of processes

USGS Publications Warehouse

Gil, Yolanda; Michel, Felix; Ratnakar, Varun; Read, Jordan S.; Hauder, Matheus; Duffy, Christopher; Hanson, Paul C.; Dugan, Hilary

2015-01-01

The Web was originally developed to support collaboration in science. Although scientists benefit from many forms of collaboration on the Web (e.g., blogs, wikis, forums, code sharing, etc.), most collaborative projects are coordinated over email, phone calls, and in-person meetings. Our goal is to develop a collaborative infrastructure for scientists to work on complex science questions that require multi-disciplinary contributions to gather and analyze data, that cannot occur without significant coordination to synthesize findings, and that grow organically to accommodate new contributors as needed as the work evolves over time. Our approach is to develop an organic data science framework based on a task-centered organization of the collaboration, includes principles from social sciences for successful on-line communities, and exposes an open science process. Our approach is implemented as an extension of a semantic wiki platform, and captures formal representations of task decomposition structures, relations between tasks and users, and other properties of tasks, data, and other relevant science objects. All these entities are captured through the semantic wiki user interface, represented as semantic web objects, and exported as linked data.

Do pictures of faces, and which ones, capture attention in the inattentional-blindness paradigm?

PubMed

Devue, Christel; Laloyaux, Cédric; Feyers, Dorothée; Theeuwes, Jan; Brédart, Serge

2009-01-01

Faces and self-referential material (eg one's own name) are more likely to capture attention in the inattentional-blindness (IB) paradigm than other stimuli. This effect is presumably due to the meaning of these stimuli rather than to their familiarity [Mack and Rock, 1998 Inattentional Blindness (Cambridge, MA: MIT Press)]. In previous work, IB has been investigated mostly with schematic stimuli. In the present study, the generalisability of this finding was tested with photographic stimuli. In support of the view that faces constitute a special category of stimuli, pictures of faces were found to resist more to IB than pictures of common objects (experiment 1) or than pictures of inverted faces (experiment 2). In a third experiment, the influence of face familiarity and identity (the participant's own face, a friend's face, and an unknown face) on IB rates was evaluated. Unexpectedly, no differential resistence to blindness across these three kinds of faces was found. In conclusion, pictures of faces attracted attention more than pictures of objects or inverted faces in the IB paradigm. However, this effect was not dependent on face familiarity or identity.

KENNEDY SPACE CENTER, FLA. - A KSC employee uses a clean-air shower before entering a clean room. Streams of pressurized air directed at the occupant from nozzles in the chamber's ceiling and walls are designed to dislodge particulate matter from hair, clothing and shoes. The adhesive mat on the floor captures soil from shoe soles, as well as particles that fall on its surface. Particulate matter has the potential to contaminate the space flight hardware being stored or processed in the clean room. The shower is part of KSC's Foreign Object Debris (FOD) control program, an important safety initiative.

NASA Image and Video Library

2003-08-29

KENNEDY SPACE CENTER, FLA. - A KSC employee uses a clean-air shower before entering a clean room. Streams of pressurized air directed at the occupant from nozzles in the chamber's ceiling and walls are designed to dislodge particulate matter from hair, clothing and shoes. The adhesive mat on the floor captures soil from shoe soles, as well as particles that fall on its surface. Particulate matter has the potential to contaminate the space flight hardware being stored or processed in the clean room. The shower is part of KSC's Foreign Object Debris (FOD) control program, an important safety initiative.

Unintentional Activation of Translation Equivalents in Bilinguals Leads to Attention Capture in a Cross-Modal Visual Task

PubMed Central

Singh, Niharika; Mishra, Ramesh Kumar

2015-01-01

Using a variant of the visual world eye tracking paradigm, we examined if language non- selective activation of translation equivalents leads to attention capture and distraction in a visual task in bilinguals. High and low proficient Hindi-English speaking bilinguals were instructed to programme a saccade towards a line drawing which changed colour among other distractor objects. A spoken word, irrelevant to the main task, was presented before the colour change. On critical trials, one of the line drawings was a phonologically related word of the translation equivalent of the spoken word. Results showed that saccade latency was significantly higher towards the target in the presence of this cross-linguistic translation competitor compared to when the display contained completely unrelated objects. Participants were also slower when the display contained the referent of the spoken word among the distractors. However, the bilingual groups did not differ with regard to the interference effect observed. These findings suggest that spoken words activates translation equivalent which bias attention leading to interference in goal directed action in the visual domain. PMID:25775184

Information recovery through image sequence fusion under wavelet transformation

NASA Astrophysics Data System (ADS)

He, Qiang

2010-04-01

Remote sensing is widely applied to provide information of areas with limited ground access with applications such as to assess the destruction from natural disasters and to plan relief and recovery operations. However, the data collection of aerial digital images is constrained by bad weather, atmospheric conditions, and unstable camera or camcorder. Therefore, how to recover the information from the low-quality remote sensing images and how to enhance the image quality becomes very important for many visual understanding tasks, such like feature detection, object segmentation, and object recognition. The quality of remote sensing imagery can be improved through meaningful combination of the employed images captured from different sensors or from different conditions through information fusion. Here we particularly address information fusion to remote sensing images under multi-resolution analysis in the employed image sequences. The image fusion is to recover complete information by integrating multiple images captured from the same scene. Through image fusion, a new image with high-resolution or more perceptive for human and machine is created from a time series of low-quality images based on image registration between different video frames.

Reducing lighting energy use in retail display windows

NASA Astrophysics Data System (ADS)

Freyssinier, Jean Paul; Frering, Daniel; Taylor, Jennifer; Narendran, Nadarajah; Rizzo, Patricia

2006-08-01

A field study was conducted at three clothing stores to validate previous laboratory findings indicating that colored LEDs used as background display lighting could: 1) lower the power demand of accent lighting by up to 50 percent; and 2) provide greater attention capture and visual appeal than current lighting practice. Blue LEDs provided a colored background for window mannequins by illuminating white backdrops. Eliminating fluorescent general lighting and reducing the number and wattage of halogen accent lamps in the display windows reduced the lighting power demand by up to 50 percent. During an eight-week period, more than 700 shoppers rated the attractiveness, eye-catching ability, comfort, and visibility of four different lighting conditions. The results of this field study showed that by introducing color contrast between the displayed objects and the background, the power demand of the accent lighting could be reduced by up to 50 percent without sacrificing visual appeal, visibility, ability to capture the attention of shoppers, and the ability to see the colors of the objects on display. Furthermore, the sales of the products on display were not affected by the 50 percent reduction in lighting.

Novel interactive virtual showcase based on 3D multitouch technology

NASA Astrophysics Data System (ADS)

Yang, Tao; Liu, Yue; Lu, You; Wang, Yongtian

2009-11-01

A new interactive virtual showcase is proposed in this paper. With the help of virtual reality technology, the user of the proposed system can watch the virtual objects floating in the air from all four sides and interact with the virtual objects by touching the four surfaces of the virtual showcase. Unlike traditional multitouch system, this system cannot only realize multi-touch on a plane to implement 2D translation, 2D scaling, and 2D rotation of the objects; it can also realize the 3D interaction of the virtual objects by recognizing and analyzing the multi-touch that can be simultaneously captured from the four planes. Experimental results show the potential of the proposed system to be applied in the exhibition of historical relics and other precious goods.

Improved segmentation of occluded and adjoining vehicles in traffic surveillance videos

NASA Astrophysics Data System (ADS)

Juneja, Medha; Grover, Priyanka

2013-12-01

Occlusion in image processing refers to concealment of any part of the object or the whole object from view of an observer. Real time videos captured by static cameras on roads often encounter overlapping and hence, occlusion of vehicles. Occlusion in traffic surveillance videos usually occurs when an object which is being tracked is hidden by another object. This makes it difficult for the object detection algorithms to distinguish all the vehicles efficiently. Also morphological operations tend to join the close proximity vehicles resulting in formation of a single bounding box around more than one vehicle. Such problems lead to errors in further video processing, like counting of vehicles in a video. The proposed system brings forward efficient moving object detection and tracking approach to reduce such errors. The paper uses successive frame subtraction technique for detection of moving objects. Further, this paper implements the watershed algorithm to segment the overlapped and adjoining vehicles. The segmentation results have been improved by the use of noise and morphological operations.

Some recent developments of the immersed interface method for flow simulation

NASA Astrophysics Data System (ADS)

Xu, Sheng

2017-11-01

The immersed interface method is a general methodology for solving PDEs subject to interfaces. In this talk, I will give an overview of some recent developments of the method toward the enhancement of its robustness for flow simulation. In particular, I will present with numerical results how to capture boundary conditions on immersed rigid objects, how to adopt interface triangulation in the method, and how to parallelize the method for flow with moving objects. With these developments, the immersed interface method can achieve accurate and efficient simulation of a flow involving multiple moving complex objects. Thanks to NSF for the support of this work under Grant NSF DMS 1320317.

A greenhouse trial to investigate the ameliorative properties of biosolids and plants on physicochemical conditions of iron ore tailings: Implications for an iron ore mine site remediation.

PubMed

Cele, Emmanuel Nkosinathi; Maboeta, Mark

2016-01-01

An iron ore mine site in Swaziland is currently (2015) in a derelict state as a consequence of past (1964-1988) and present (2011 - current) iron ore mining operations. In order to control problems associated with mine wastes, the Swaziland Water Services Corporation (SWSC) recently (2013) proposed the application of biosolids in sites degraded by mining operations. It is thought that this practice could generally improve soil conditions and enhance plant reestablishment. More importantly, the SWSC foresees this as a potential solution to the biosolids disposal problems. In order to investigate the effects of biosolids and plants in soil physicochemical conditions of iron mine soils, we conducted two plant growth trials. Trial 1 consisted of tailings that received biosolids and topsoil (TUSB mix) while in trial 2, tailings received biosolids only (TB mix). In the two trials, the application rates of 0 (control), 10, 25, 50, 75 and 100 t ha(-1) were used. After 30 days of equilibration, 25 seeds of Cynodon dactylon were sown in each pot and thinned to 10 plants after 4 weeks. Plants were watered twice weekly and remained under greenhouse conditions for 12 weeks, subsequent to which soils were subjected to chemical analysis. According to the results obtained, there were significant improvements in soil parameters related to fertility such as organic matter (OM), water holding capacity (WHC), cation exchange capacity (CEC), ammonium [Formula: see text] , magnesium (Mg(2+)), calcium (Ca(2+)) and phosphorus ( [Formula: see text] ). With regard to heavy metals, biosolids led to significant increases in soil total concentrations of Cu, Zn, Cd, Hg and Pb. The higher concentrations of Zn and Cu in treated tailings compared to undisturbed adjacent soils are a cause for concern because in the field, this might work against the broader objectives of mine soil remediation, which include the recolonization of reclaimed sites by soil-dwelling organisms. Therefore, while biosolids contain important nutrients that may greatly improve physicochemical conditions and enhance vegetation reestablishment in mined soils, the threat of the build-up of higher levels of trace elements in treated tailings compared to surrounding adjacent soils must not be underestimated. Copyright © 2015 Elsevier Ltd. All rights reserved.

Kinematic discrimination of ataxia in horses is facilitated by blindfolding.

PubMed

Olsen, E; FouchÉ, N; Jordan, H; Pfau, T; Piercy, R J

2018-03-01

Agreement among experienced clinicians is poor when assessing the presence and severity of ataxia, especially when signs are mild. Consequently, objective gait measurements might be beneficial for assessment of horses with neurological diseases. To assess diagnostic criteria using motion capture to measure variability in spatial gait-characteristics and swing duration derived from ataxic and non-ataxic horses, and to assess if variability increases with blindfolding. Cross-sectional. A total of 21 horses underwent measurements in a gait laboratory and live neurological grading by multiple raters. In the gait laboratory, the horses were made to walk across a runway surrounded by a 12-camera motion capture system with a sample frequency of 240 Hz. They were made to walk normally and with a blindfold in at least three trials each. Displacements of reflective markers on head, fetlock, hoof, fourth lumbar vertebra, tuber coxae and sacrum derived from three to four consecutive strides were processed and descriptive statistics, receiver operator characteristics (ROC) to determine the diagnostic sensitivity, specificity and area under the curve (AUC), and correlation between median ataxia grade and gait parameters were determined. For horses with a median ataxia grade ≥2, coefficient of variation for the location of maximum vertical displacement of pelvic and thoracic distal limbs generated good diagnostic yield. The hoofs of the thoracic limbs yielded an AUC of 0.81 with 64% sensitivity and 90% specificity. Blindfolding exacerbated the variation for ataxic horses compared to non-ataxic horses with the hoof marker having an AUC of 0.89 with 82% sensitivity and 90% specificity. The low number of consecutive strides per horse obtained with motion capture could decrease diagnostic utility. Motion capture can objectively aid the assessment of horses with ataxia. Furthermore, blindfolding increases variation in distal pelvic limb kinematics making it a useful clinical tool. © 2017 EVJ Ltd.

A Standard-Compliant Virtual Meeting System with Active Video Object Tracking

NASA Astrophysics Data System (ADS)

Lin, Chia-Wen; Chang, Yao-Jen; Wang, Chih-Ming; Chen, Yung-Chang; Sun, Ming-Ting

2002-12-01

This paper presents an H.323 standard compliant virtual video conferencing system. The proposed system not only serves as a multipoint control unit (MCU) for multipoint connection but also provides a gateway function between the H.323 LAN (local-area network) and the H.324 WAN (wide-area network) users. The proposed virtual video conferencing system provides user-friendly object compositing and manipulation features including 2D video object scaling, repositioning, rotation, and dynamic bit-allocation in a 3D virtual environment. A reliable, and accurate scheme based on background image mosaics is proposed for real-time extracting and tracking foreground video objects from the video captured with an active camera. Chroma-key insertion is used to facilitate video objects extraction and manipulation. We have implemented a prototype of the virtual conference system with an integrated graphical user interface to demonstrate the feasibility of the proposed methods.

A Taxonomy of Object-Oriented Measures Modeling the Object-Oriented Space

NASA Technical Reports Server (NTRS)

Neal, Ralph D.; Weistroffer, H. Roland; Coppins, Richard J.

1997-01-01

In order to control the quality of software and the software development process, it is important to understand the measurement of software. A first step toward a better comprehension of software measurement is the categorization of software measures by some meaningful taxonomy. The most worthwhile taxonomy would capture the fundamental nature of the object-oriented (O-O) space. The principal characteristics of object-oriented software offer a starting point for such a categorization of measures. This paper introduces a taxonomy of measures based upon fourteen characteristics of object-oriented software gathered from the literature. This taxonomy allows us to easily see gaps or redundancies in the existing O-O measures. The taxonomy also clearly differentiates among taxa so that there is no ambiguity as to the taxon to which a measure belongs. The taxonomy has been populated with measures taken from the literature.

A Taxonomy of Object-Oriented Measures Modeling the Object Oriented Space

NASA Technical Reports Server (NTRS)

Neal, Ralph D.; Weistroffer, H. Roland; Coppins, Richard J.

1997-01-01

In order to control the quality of software and the software development process, it is important to understand the measurement of software. A first step toward a better comprehension of software measurement is the categorization of software measures by some meaningful taxonomy. The most worthwhile taxonomy would capture the fundamental nature of the object-oriented (O-O) space. The principal characteristics of object-oriented software offer a starting point for such a categorization of measures. This paper introduces a taxonomy of measures based upon fourteen characteristics of object-oriented software gathered from the literature. This taxonomy allows us to easily see gaps or redundancies in the existing O-O measures. The taxonomy also clearly differentiates among taxa so that there is no ambiguity as to the taxon to which a measure belongs. The taxonomy has been populated with measures taken from the literature.

Moving Object Detection on a Vehicle Mounted Back-Up Camera

PubMed Central

Kim, Dong-Sun; Kwon, Jinsan

2015-01-01

In the detection of moving objects from vision sources one usually assumes that the scene has been captured by stationary cameras. In case of backing up a vehicle, however, the camera mounted on the vehicle moves according to the vehicle’s movement, resulting in ego-motions on the background. This results in mixed motion in the scene, and makes it difficult to distinguish between the target objects and background motions. Without further treatments on the mixed motion, traditional fixed-viewpoint object detection methods will lead to many false-positive detection results. In this paper, we suggest a procedure to be used with the traditional moving object detection methods relaxing the stationary cameras restriction, by introducing additional steps before and after the detection. We also decribe the implementation as a FPGA platform along with the algorithm. The target application of this suggestion is use with a road vehicle’s rear-view camera systems. PMID:26712761

Stimulus-driven attentional capture by subliminal onset cues.

PubMed

Schoeberl, Tobias; Fuchs, Isabella; Theeuwes, Jan; Ansorge, Ulrich

2015-04-01

In two experiments, we tested whether subliminal abrupt onset cues capture attention in a stimulus-driven way. An onset cue was presented 16 ms prior to the stimulus display that consisted of clearly visible color targets. The onset cue was presented either at the same side as the target (the valid cue condition) or on the opposite side of the target (the invalid cue condition). Because the onset cue was presented 16 ms before other placeholders were presented, the cue was subliminal to the participant. To ensure that this subliminal cue captured attention in a stimulus-driven way, the cue's features did not match the top-down attentional control settings of the participants: (1) The color of the cue was always different than the color of the non-singleton targets ensuring that a top-down set for a specific color or for a singleton would not match the cue, and (2) colored targets and distractors had the same objective luminance (measured by the colorimeter) and subjective lightness (measured by flicker photometry), preventing a match between the top-down set for target and cue contrast. Even though a match between the cues and top-down settings was prevented, in both experiments, the cues captured attention, with faster response times in valid than invalid cue conditions (Experiments 1 and 2) and faster response times in valid than the neutral conditions (Experiment 2). The results support the conclusion that subliminal cues capture attention in a stimulus-driven way.

Implicit learning modulates attention capture: evidence from an item-specific proportion congruency manipulation.

PubMed

Thomson, David R; Willoughby, Karen; Milliken, Bruce

2014-01-01

A host of research has now shown that our explicit goals and intentions can, in large part, overcome the capture of visual attention by objects that differ from their surroundings in terms of size, shape, or color. Surprisingly however, there is little evidence for the role of implicit learning in mitigating capture effects despite the fact that such learning has been shown to strongly affect behavior in a host of other performance domains. Here, we employ a modified attention capture paradigm, based on the work of Theeuwes (1991, 1992), in which participants must search for an odd-shaped target amongst homogeneous distracters. On each trial, there is also a salient, but irrelevant odd-colored distracter. Across the experiments reported, we intermix two search contexts: for one set of distracters (e.g., squares) the shape singleton and color singleton coincide on a majority of trials (high proportion congruent condition), whereas for the other set of distracters (e.g., circles) the shape and color singletons are highly unlikely to coincide (low proportion congruent condition). Crucially, we find that observers learn to allow the capture of attention by the salient distracter to a greater extent in the high, compared to the low proportion congruent condition, albeit only when search is sufficiently difficult. Moreover, this effect of prior experience on search behavior occurs in the absence of awareness of our proportion manipulation. We argue that low-level properties of the search displays recruit representations of prior experience in a rapid, flexible, and implicit manner.

Final design of a space debris removal system

NASA Technical Reports Server (NTRS)

Carlson, Erika; Casali, Steve; Chambers, Don; Geissler, Garner; Lalich, Andrew; Leipold, Manfred; Mach, Richard; Parry, John; Weems, Foley

1990-01-01

The objective is the removal of medium sized orbital debris in low Earth orbits. The design incorporates a transfer vehicle and a netting vehicle to capture the medium size debris. The system is based near an operational space station located at 28.5 degrees inclination and 400 km altitude. The system uses ground based tracking to determine the location of a satellite breakup or debris cloud. This data is unloaded to the transfer vehicle, and the transfer vehicle proceeds to rendezvous with the debris at a lower altitude parking orbit. Next, the netting vehicle is deployed, tracks the targeted debris, and captures it. After expending the available nets, the netting vehicle returns to the transfer vehicle for a new netting module and continues to capture more debris in the target area. Once all the netting modules are expended, the transfer vehicle returns to the space station's orbit, where it is resupplied with new netting modules from a space shuttle load. The new modules are launched by the shuttle from the ground, and the expended modules are taken back to Earth for removal of the captured debris, refueling, and repacking of the nets. Once the netting modules are refurbished, they are taken back into orbit for reuse. In a typical mission, the system has the ability to capture 50 pieces of orbital debris. One mission will take about six months. The system is designed to allow for a 30 degree inclination change on the outgoing and incoming trips of the transfer vehicle.

Predator evasion by white-tailed deer fawns

USGS Publications Warehouse

Grovenburg, Troy W.; Monteith, Kevin L.; Klaver, Robert W.; Jenks, Jonathan A.

2012-01-01

Despite their importance for understanding predator–prey interactions, factors that affect predator evasion behaviours of offspring of large ungulates are poorly understood. Our objective was to characterize the influence of selection and availability of escape cover and maternal presence on predator evasion by white-tailed deer, Odocoileus virginianus, fawns in the northern Great Plains, U.S.A. We observed 45 coyote, Canis latrans, chases of fawns, and we participated in 83 human chases of fawns during 2007–2009, of which, 19 and 42 chases, respectively, ended with capture of the fawn. Evasive techniques used by fawns were similar for human and coyote chases. Likelihood of a white-tailed deer fawn escaping capture, however, was influenced by deer group size and a number of antipredator behaviours, including aggressive defence by females, initial habitat and selection of escape cover, all of which were modified by the presence of parturient females. At the initiation of a chase, fawns in grasslands were more likely to escape, whereas fawns in forested cover, cultivated land or wheat were more likely to be captured by a coyote or human. Fawns fleeing to wetlands and grasslands also were less likely to be captured compared with those choosing forested cover, wheat and cultivated land. Increased probability of capture was associated with greater distance to wetland and grassland habitats and decreased distance to wheat. Use of wetland habitat as a successful antipredator strategy highlights the need for a greater understanding of the importance of habitat complexity in predator avoidance.

On the problem of origin of periodic comets.

NASA Astrophysics Data System (ADS)

Guliev, A. S.

The problem of origin of periodic comets is viewed under various aspects. A steady growth of the fraction of these comets in the overall population of comets is emphasized. The number of discovered periodic comets with small eccentricities and with the Jacobi constant close to 3 is also growing eventually. Comparison of maximum magnitudes of the same comets in different apparitions at the same elongations as well as the analysis of exhausted comets indicate that the age of these objects does not exceed 1000 years. Capture is considered as an efficient mechanism for preserving equilibrium over reasonable time intervals. The analysis of the data given by Everhart and the calculations of the evolution of cometary orbits reveal small efficiency of capture. Comparison of the number of well established capture cases with the corresponding time interval shows that the age of the system of periodic comets must be 17000 years within the framework of this mechanism. This is most unlikely. Secular variations in the distributions of semimajor axes, inclinations, longitudes of perihelia, eccentricities of orbits of periodic comets are analysed. On the average, the eccentricities tend to increase, but this conflicts with the capture mechanism. A conclusion is made that the concept of capture in its classical and modern versions is unable to solve the problem of the origin of periodic comets on the whole. Other, more effective sources and mechanisms seem to be also in operation in enlarging the cometary system.

Final design of a space debris removal system

NASA Astrophysics Data System (ADS)

Carlson, Erika; Casali, Steve; Chambers, Don; Geissler, Garner; Lalich, Andrew; Leipold, Manfred; Mach, Richard; Parry, John; Weems, Foley

1990-12-01

The objective is the removal of medium sized orbital debris in low Earth orbits. The design incorporates a transfer vehicle and a netting vehicle to capture the medium size debris. The system is based near an operational space station located at 28.5 degrees inclination and 400 km altitude. The system uses ground based tracking to determine the location of a satellite breakup or debris cloud. This data is unloaded to the transfer vehicle, and the transfer vehicle proceeds to rendezvous with the debris at a lower altitude parking orbit. Next, the netting vehicle is deployed, tracks the targeted debris, and captures it. After expending the available nets, the netting vehicle returns to the transfer vehicle for a new netting module and continues to capture more debris in the target area. Once all the netting modules are expended, the transfer vehicle returns to the space station's orbit, where it is resupplied with new netting modules from a space shuttle load. The new modules are launched by the shuttle from the ground, and the expended modules are taken back to Earth for removal of the captured debris, refueling, and repacking of the nets. Once the netting modules are refurbished, they are taken back into orbit for reuse. In a typical mission, the system has the ability to capture 50 pieces of orbital debris. One mission will take about six months. The system is designed to allow for a 30 degree inclination change on the outgoing and incoming trips of the transfer vehicle.

Provider Communication, Prompts, and Feedback to Improve HPV Vaccination Rates in Resident Clinics.

PubMed

Rand, Cynthia M; Schaffer, Stanley J; Dhepyasuwan, Nui; Blumkin, Aaron; Albertin, Christina; Serwint, Janet R; Darden, Paul M; Humiston, Sharon G; Mann, Keith J; Stratbucker, William; Szilagyi, Peter G

2018-04-01

Human papillomavirus (HPV) vaccination rates lag behind vaccination rates for other adolescent vaccines; a bundled intervention may improve HPV vaccination rates. Our objective is to evaluate the impact of quality improvement (QI) training plus a bundled practice-based intervention (provider prompts plus communication skills training plus performance feedback) on improving HPV vaccinations in pediatric resident continuity clinics. Staff and providers in 8 resident clinics participated in a 12-month QI study. The intervention included training to strengthen provider communication about the HPV vaccine. Clinics also implemented provider prompts, received monthly performance feedback, and participated in learning collaborative calls. The primary outcome measure was eligible visits with vaccination divided by vaccine-eligible visits (captured HPV vaccination opportunities). Practices performed chart audits that were fed into monthly performance feedback on captured HPV vaccination opportunities. We used conditional logistic regression (conditioning on practice) to assess captured vaccination opportunities, with the time period of the study (before and after the QI intervention) as the independent variable. Overall, captured opportunities for HPV vaccination increased by 16.4 percentage points, from 46.9% to 63.3%. Special cause was demonstrated by centerline shift, with 8 consecutive points above the preintervention mean. On adjusted analyses, patients were more likely to receive a vaccine during, versus before, the intervention (odds ratio: 1.87; 95% confidence interval: 1.54-2.28). Captured HPV vaccination rates improved at both well-child and other visits (by 11.7 and 13.0 percentage points, respectively). A bundled intervention of provider prompts and training in communication skills plus performance feedback increased captured opportunities for HPV vaccination. Copyright © 2018 by the American Academy of Pediatrics.

Reward and attentional control in visual search.

PubMed

Yantis, Steven; Anderson, Brian A; Wampler, Emma K; Laurent, Patryk A

2012-01-01

It has long been known that the control of attention in visual search depends both on voluntary, top-down deployment according to context-specific goals, and on involuntary, stimulus-driven capture based on the physical conspicuity of perceptual objects. Recent evidence suggests that pairing target stimuli with reward can modulate the voluntary deployment of attention, but there is little evidence that reward modulates the involuntary deployment of attention to task-irrelevant distractors. We report several experiments that investigate the role of reward learning on attentional control. Each experiment involved a training phase and a test phase. In the training phase, different colors were associated with different amounts of monetary reward. In the test phase, color was not task-relevant and participants searched for a shape singleton; in most experiments no reward was delivered in the test phase. We first show that attentional capture by physically salient distractors is magnified by a previous association with reward. In subsequent experiments we demonstrate that physically inconspicuous stimuli previously associated with reward capture attention persistently during extinction--even several days after training. Furthermore, vulnerability to attentional capture by high-value stimuli is negatively correlated across individuals with working memory capacity and positively correlated with trait impulsivity. An analysis of intertrial effects reveals that value-driven attentional capture is spatially specific. Finally, when reward is delivered at test contingent on the task-relevant shape feature, recent reward history modulates value-driven attentional capture by the irrelevant color feature. The influence of learned value on attention may provide a useful model of clinical syndromes characterized by similar failures of cognitive control, including addiction, attention-deficit/hyperactivity disorder, and obesity.

Capture-related stressors impair immune system function in sablefish

USGS Publications Warehouse

Lupes, S.C.; Davis, M.W.; Olla, B.L.; Schreck, C.B.

2006-01-01

The sablefish Anoplopoma fimbria is a valuable North Pacific Ocean species that, when not targeted in various commercial fisheries, is often a part of discarded bycatch. Predictions of the survival of discarded fish are dependent on understanding how a fish responds to stressful conditions. Our objective was to describe the immunological health of sablefish exposed to capture stressors. In laboratory experiments designed to simulate the capture process, we subjected sablefish to various stressors that might influence survival: towing in a net, hooking, elevated seawater and air temperatures, and air exposure time. After stress was imposed, the in vitro mitogen-stimulated proliferation of sablefish leukocytes was used to evaluate the function of the immune system in an assay we validated for this species. The results demonstrated that regardless of fishing gear type, exposure to elevated seawater temperature, or time in air, the leukocytes from stressed sablefish exhibited significantly diminished proliferative responses to the T-cell mitogen, concanavalin A, or the B-cell mitogen, lipopolysaccharide. There was no difference in the immunological responses associated with seawater or air temperature. The duration and severity of the capture stressors applied in our study were harsh enough to induce significantly elevated levels of plasma cortisol and glucose, but there was no difference in the magnitude of levels among stressor treatments. These data suggest that immunological suppression occurs in sablefish subjected to capture-related stressors. The functional impairment of the immune system after capture presents a potential reason why delayed mortality is possible in discarded sablefish. Further studies are needed to determine whether delayed mortality in discarded sablefish can be caused by increased susceptibility to infectious agents resulting from stressor-mediated immunosuppression.

A Study on The Development of Local Exhaust Ventilation System (LEV’s) for Installation of Laser Cutting Machine

NASA Astrophysics Data System (ADS)

Harun, S. I.; Idris, S. R. A.; Tamar Jaya, N.

2017-09-01

Local exhaust ventilation (LEV) is an engineering system frequently used in the workplace to protect operators from hazardous substances. The objective of this project is design and fabricate the ventilation system as installation for chamber room of laser cutting machine and to stimulate the air flow inside chamber room of laser cutting machine with the ventilation system that designed. LEV’s fabricated with rated voltage D.C 10.8V and 1.5 ampere. Its capacity 600 ml, continuously use limit approximately 12-15 minute, overall length LEV’s fabricated is 966 mm with net weight 0.88 kg and maximum airflow is 1.3 meter cubic per minute. Stimulate the air flow inside chamber room of laser cutting machine with the ventilation system that designed and fabricated overall result get 2 main gas vapor which air and carbon dioxide. For air gas which experimented by using anemometer, general duct velocity that produce is same with other gas produce, carbon dioxide which 5 m/s until 10 m/s. Overall result for 5 m/s and 10 m/s as minimum and maximum duct velocity produce for both air and carbon dioxide. The air gas flow velocity that captured by LEV’s fabricated, 3.998 m/s average velocity captured from 5 m/s duct velocity which it efficiency of 79.960% and 7.667 m/s average velocity captured from 10 m/s duct velocity with efficiency of 76.665%. For carbon dioxide gas flow velocity that captured by LEV’s fabricated, 3.674 m/s average velocity captured from 5 m/s duct velocity which it efficiency of 73.480% and 8.255 m/s average velocity captured from 10 m/s duct velocity with efficiency of 82.545%.

Reward and Attentional Control in Visual Search

PubMed Central

Anderson, Brian A.; Wampler, Emma K.; Laurent, Patryk A.

2015-01-01

It has long been known that the control of attention in visual search depends both on voluntary, top-down deployment according to context-specific goals, and on involuntary, stimulus-driven capture based on the physical conspicuity of perceptual objects. Recent evidence suggests that pairing target stimuli with reward can modulate the voluntary deployment of attention, but there is little evidence that reward modulates the involuntary deployment of attention to task-irrelevant distractors. We report several experiments that investigate the role of reward learning on attentional control. Each experiment involved a training phase and a test phase. In the training phase, different colors were associated with different amounts of monetary reward. In the test phase, color was not task-relevant and participants searched for a shape singleton; in most experiments no reward was delivered in the test phase. We first show that attentional capture by physically salient distractors is magnified by a previous association with reward. In subsequent experiments we demonstrate that physically inconspicuous stimuli previously associated with reward capture attention persistently during extinction—even several days after training. Furthermore, vulnerability to attentional capture by high-value stimuli is negatively correlated across individuals with working memory capacity and positively correlated with trait impulsivity. An analysis of intertrial effects reveals that value-driven attentional capture is spatially specific. Finally, when reward is delivered at test contingent on the task-relevant shape feature, recent reward history modulates value-driven attentional capture by the irrelevant color feature. The influence of learned value on attention may provide a useful model of clinical syndromes characterized by similar failures of cognitive control, including addiction, attention-deficit/hyperactivity disorder, and obesity. PMID:23437631

Evaluation of Food Lures for Capture and Monitoring of Anastrepha fraterculus (Diptera: Tephritidae) on Temperate Fruit Trees.

PubMed

Rosa, J M da; Arioli, C J; Santos, J P Dos; Menezes-Netto, A C; Botton, M

2017-06-01

The Anastrepha fraterculus (Wiedemann) (Diptera: Tephritidae) is the main pest of fruit trees grown in temperate climates in the southern region of Brazil. The objective of this work was to evaluate the efficiency of the major commercial food lures used in Brazil for trapping and monitoring of A. fraterculus in plum, pear, and feijoa orchards. The assessed lures were hydrolyzed proteins of animal origin (CeraTrap) and plant origin (BioAnastrepha), torula yeast + borax (Torula), and grape juice. Response variables included the rate of adult capture (flies per trap per day, FTD) and the percentage of females captured. We also evaluated the number of times the weekly capture rate exceeded the traditional threshold of 0.5 FTD for each lure. Traps baited with grape juice, currently used for monitoring A. fraterculus in Southern Brazil, captured fewer adults and a lower percentage of females compared with the other lures. CeraTrap trapped a greater number of A. fraterculus adults and, in some cases, a lower percentage of females compared with the other lures in pears. Traps baited with CeraTrap had greater capture rates (FTD), particularly during the stages of fruit maturation and harvest, and even in years with low population density of A. fraterculus, thus demonstrating greater sensitivity in the detection of this pest. These results show that, in order to detect and monitor the presence of A. fraterculus in plum, feijoa, and pear crops, protein-based lures are superior to grape juice, especially the animal protein CeraTrap. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

An Investigation of Automatic Change Detection for Topographic Map Updating

NASA Astrophysics Data System (ADS)

Duncan, P.; Smit, J.

2012-08-01

Changes to the landscape are constantly occurring and it is essential for geospatial and mapping organisations that these changes are regularly detected and captured, so that map databases can be updated to reflect the current status of the landscape. The Chief Directorate of National Geospatial Information (CD: NGI), South Africa's national mapping agency, currently relies on manual methods of detecting changes and capturing these changes. These manual methods are time consuming and labour intensive, and rely on the skills and interpretation of the operator. It is therefore necessary to move towards more automated methods in the production process at CD: NGI. The aim of this research is to do an investigation into a methodology for automatic or semi-automatic change detection for the purpose of updating topographic databases. The method investigated for detecting changes is through image classification as well as spatial analysis and is focussed on urban landscapes. The major data input into this study is high resolution aerial imagery and existing topographic vector data. Initial results indicate the traditional pixel-based image classification approaches are unsatisfactory for large scale land-use mapping and that object-orientated approaches hold more promise. Even in the instance of object-oriented image classification generalization of techniques on a broad-scale has provided inconsistent results. A solution may lie with a hybrid approach of pixel and object-oriented techniques.

An automated calibration method for non-see-through head mounted displays.

PubMed

Gilson, Stuart J; Fitzgibbon, Andrew W; Glennerster, Andrew

2011-08-15

Accurate calibration of a head mounted display (HMD) is essential both for research on the visual system and for realistic interaction with virtual objects. Yet, existing calibration methods are time consuming and depend on human judgements, making them error prone, and are often limited to optical see-through HMDs. Building on our existing approach to HMD calibration Gilson et al. (2008), we show here how it is possible to calibrate a non-see-through HMD. A camera is placed inside a HMD displaying an image of a regular grid, which is captured by the camera. The HMD is then removed and the camera, which remains fixed in position, is used to capture images of a tracked calibration object in multiple positions. The centroids of the markers on the calibration object are recovered and their locations re-expressed in relation to the HMD grid. This allows established camera calibration techniques to be used to recover estimates of the HMD display's intrinsic parameters (width, height, focal length) and extrinsic parameters (optic centre and orientation of the principal ray). We calibrated a HMD in this manner and report the magnitude of the errors between real image features and reprojected features. Our calibration method produces low reprojection errors without the need for error-prone human judgements. Copyright © 2011 Elsevier B.V. All rights reserved.

Resonant Transneptunian Binaries: Evidence for Slow Migration of Neptune

NASA Technical Reports Server (NTRS)

Noll, Keith S.; Grundy, W. M.; Schlichting, H. E.; Murray-Clay, R. A.; Benecchi, S. B.

2012-01-01

As Neptune migrated, its mean-motion resonances preceded it into the planetesimal disk. The efficiency of capture into mean motion resonances depends on the smoothness of Neptune's migration and the local population available to be captured. The two strongest resonances, the 3:2 at 39.4 AU and 2:1 at 47.7 AU, straddle the core repository of the physically distinct and binary-rich Cold Classicals, providing a unique opportunity to test the details of Neptune's migration. Smooth migration should result in a measurable difference between the 3:2 and 2:1 resonant object properties, with low inclination 2:1s having a high fraction of red binaries, mirroring that of the Cold Classicals while the 3:2 will would have fewer binaries. Rapid migration would generate a more homogeneous result. Resonant objects observed with HST show a higher rate of binaries in the 2:1 relative to the 3:2, significant at the 2cr level. This suggests slow Neptune migration over a large enough distance that the 2:1 swept through the Cold Classical region. Colors are available for only a fraction of these targets but a prevalence of red objects in outer Resonances has been reported. We report here on ongoing observations with HST in cycle 19 targeting all unobserved Resonants with observations that will measure color and search for binary companions using the WFC3.

Toward Objective Monitoring of Ingestive Behavior in Free-living Population

PubMed Central

Sazonov, Edward S.; Schuckers, Stephanie A.C.; Lopez-Meyer, Paulo; Makeyev, Oleksandr; Melanson, Edward L.; Neuman, Michael R.; Hill, James O.

2010-01-01

Understanding of eating behaviors associated with obesity requires objective and accurate monitoring of food intake patterns. Accurate methods are available for measuring total energy expenditure and its components in free-living populations, but methods for measuring food intake in free-living people are far less accurate and involve self-reporting or subjective monitoring. We suggest that chews and swallows can be used for objective monitoring of ingestive behavior. This hypothesis was verified in a human study involving 20 subjects. Chews and swallows were captured during periods of quiet resting, talking, and meals of varying size. The counts of chews and swallows along with other derived metrics were used to build prediction models for detection of food intake, differentiation between liquids and solids, and for estimation of the mass of ingested food. The proposed prediction models were able to detect periods of food intake with >95% accuracy and a fine time resolution of 30 s, differentiate solid foods from liquids with >91% accuracy, and predict mass of ingested food with >91% accuracy for solids and >83% accuracy for liquids. In earlier publications, we have shown that chews and swallows can be captured by noninvasive sensors that could be developed into a wearable device. Thus, the proposed methodology could lead to the development of an innovative new way of assessing human eating behavior in free-living conditions. PMID:19444225

Toward objective monitoring of ingestive behavior in free-living population.

PubMed

Sazonov, Edward S; Schuckers, Stephanie A C; Lopez-Meyer, Paulo; Makeyev, Oleksandr; Melanson, Edward L; Neuman, Michael R; Hill, James O

2009-10-01

Understanding of eating behaviors associated with obesity requires objective and accurate monitoring of food intake patterns. Accurate methods are available for measuring total energy expenditure and its components in free-living populations, but methods for measuring food intake in free-living people are far less accurate and involve self-reporting or subjective monitoring. We suggest that chews and swallows can be used for objective monitoring of ingestive behavior. This hypothesis was verified in a human study involving 20 subjects. Chews and swallows were captured during periods of quiet resting, talking, and meals of varying size. The counts of chews and swallows along with other derived metrics were used to build prediction models for detection of food intake, differentiation between liquids and solids, and for estimation of the mass of ingested food. The proposed prediction models were able to detect periods of food intake with >95% accuracy and a fine time resolution of 30 s, differentiate solid foods from liquids with >91% accuracy, and predict mass of ingested food with >91% accuracy for solids and >83% accuracy for liquids. In earlier publications, we have shown that chews and swallows can be captured by noninvasive sensors that could be developed into a wearable device. Thus, the proposed methodology could lead to the development of an innovative new way of assessing human eating behavior in free-living conditions.

The IRMIS object model and services API.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saunders, C.; Dohan, D. A.; Arnold, N. D.

2005-01-01

The relational model developed for the Integrated Relational Model of Installed Systems (IRMIS) toolkit has been successfully used to capture the Advanced Photon Source (APS) control system software (EPICS process variables and their definitions). The relational tables are populated by a crawler script that parses each Input/Output Controller (IOC) start-up file when an IOC reboot is detected. User interaction is provided by a Java Swing application that acts as a desktop for viewing the process variable information. Mapping between the display objects and the relational tables was carried out with the Hibernate Object Relational Modeling (ORM) framework. Work is wellmore » underway at the APS to extend the relational modeling to include control system hardware. For this work, due in part to the complex user interaction required, the primary application development environment has shifted from the relational database view to the object oriented (Java) perspective. With this approach, the business logic is executed in Java rather than in SQL stored procedures. This paper describes the object model used to represent control system software, hardware, and interconnects in IRMIS. We also describe the services API used to encapsulate the required behaviors for creating and maintaining the complex data. In addition to the core schema and object model, many important concepts in IRMIS are captured by the services API. IRMIS is an ambitious collaborative effort for defining and developing a relational database and associated applications to comprehensively document the large and complex EPICS-based control systems of today's accelerators. The documentation effort includes process variables, control system hardware, and interconnections. The approach could also be used to document all components of the accelerator, including mechanical, vacuum, power supplies, etc. One key aspect of IRMIS is that it is a documentation framework, not a design and development tool. We do not generate EPICS control system configurations from IRMIS, and hence do not impose any additional requirements on EPICS developers.« less

Innovative hybrid pile oscillator technique in the Minerve reactor: open loop vs. closed loop

NASA Astrophysics Data System (ADS)

Geslot, Benoit; Gruel, Adrien; Bréaud, Stéphane; Leconte, Pierre; Blaise, Patrick

2018-01-01

Pile oscillator techniques are powerful methods to measure small reactivity worth of isotopes of interest for nuclear data improvement. This kind of experiments has long been implemented in the Mineve experimental reactor, operated by CEA Cadarache. A hybrid technique, mixing reactivity worth estimation and measurement of small changes around test samples is presented here. It was made possible after the development of high sensitivity miniature fission chambers introduced next to the irradiation channel. A test campaign, called MAESTRO-SL, took place in 2015. Its objective was to assess the feasibility of the hybrid method and investigate the possibility to separate mixed neutron effects, such as fission/capture or scattering/capture. Experimental results are presented and discussed in this paper, which focus on comparing two measurements setups, one using a power control system (closed loop) and another one where the power is free to drift (open loop). First, it is demonstrated that open loop is equivalent to closed loop. Uncertainty management and methods reproducibility are discussed. Second, results show that measuring the flux depression around oscillated samples provides valuable information regarding partial neutron cross sections. The technique is found to be very sensitive to the capture cross section at the expense of scattering, making it very useful to measure small capture effects of highly scattering samples.

Gestalt Perceptual Organization of Visual Stimuli Captures Attention Automatically: Electrophysiological Evidence

PubMed Central

Marini, Francesco; Marzi, Carlo A.

2016-01-01

The visual system leverages organizational regularities of perceptual elements to create meaningful representations of the world. One clear example of such function, which has been formalized in the Gestalt psychology principles, is the perceptual grouping of simple visual elements (e.g., lines and arcs) into unitary objects (e.g., forms and shapes). The present study sought to characterize automatic attentional capture and related cognitive processing of Gestalt-like visual stimuli at the psychophysiological level by using event-related potentials (ERPs). We measured ERPs during a simple visual reaction time task with bilateral presentations of physically matched elements with or without a Gestalt organization. Results showed that Gestalt (vs. non-Gestalt) stimuli are characterized by a larger N2pc together with enhanced ERP amplitudes of non-lateralized components (N1, N2, P3) starting around 150 ms post-stimulus onset. Thus, we conclude that Gestalt stimuli capture attention automatically and entail characteristic psychophysiological signatures at both early and late processing stages. Highlights We studied the neural signatures of the automatic processes of visual attention elicited by Gestalt stimuli. We found that a reliable early correlate of attentional capture turned out to be the N2pc component. Perceptual and cognitive processing of Gestalt stimuli is associated with larger N1, N2, and P3 PMID:27630555

E-Beam Capture Aid Drawing Based Modelling on Cell Biology

NASA Astrophysics Data System (ADS)

Hidayat, T.; Rahmat, A.; Redjeki, S.; Rahman, T.

2017-09-01

The objectives of this research are to find out how far Drawing-based Modeling assisted with E-Beam Capture could support student’s scientific reasoning skill using Drawing - based Modeling approach assisted with E-Beam Capture. The research design that is used for this research is the Pre-test and Post-test Design. The data collection of scientific reasoning skills is collected by giving multiple choice questions before and after the lesson. The data analysis of scientific reasoning skills is using scientific reasoning assessment rubric. The results show an improvement of student’s scientific reasoning in every indicator; an improvement in generativity which shows 2 students achieving high scores, 3 students in elaboration reasoning, 4 students in justification, 3 students in explanation, 3 students in logic coherency, 2 students in synthesis. The research result in student’s explanation reasoning has the highest number of students with high scores, which shows 20 students with high scores in the pre-test and 23 students in post-test and synthesis reasoning shows the lowest number, which shows 1 student in the pretest and 3 students in posttest. The research result gives the conclusion that Drawing-based Modeling approach assisted with E-Beam Capture could not yet support student’s scientific reasoning skills comprehensively.

Memory-Based Attention Capture when Multiple Items Are Maintained in Visual Working Memory

PubMed Central

Hollingworth, Andrew; Beck, Valerie M.

2016-01-01

Efficient visual search requires that attention is guided strategically to relevant objects, and most theories of visual search implement this function by means of a target template maintained in visual working memory (VWM). However, there is currently debate over the architecture of VWM-based attentional guidance. We contrasted a single-item-template hypothesis with a multiple-item-template hypothesis, which differ in their claims about structural limits on the interaction between VWM representations and perceptual selection. Recent evidence from van Moorselaar, Theeuwes, and Olivers (2014) indicated that memory-based capture during search—an index of VWM guidance—is not observed when memory set size is increased beyond a single item, suggesting that multiple items in VWM do not guide attention. In the present study, we maximized the overlap between multiple colors held in VWM and the colors of distractors in a search array. Reliable capture was observed when two colors were held in VWM and both colors were present as distractors, using both the original van Moorselaar et al. singleton-shape search task and a search task that required focal attention to array elements (gap location in outline square stimuli). In the latter task, memory-based capture was consistent with the simultaneous guidance of attention by multiple VWM representations. PMID:27123681

Quantifying efficacy and limits of unmanned aerial vehicle (UAV) technology for weed seedling detection as affected by sensor resolution.

PubMed

Peña, José M; Torres-Sánchez, Jorge; Serrano-Pérez, Angélica; de Castro, Ana I; López-Granados, Francisca

2015-03-06

In order to optimize the application of herbicides in weed-crop systems, accurate and timely weed maps of the crop-field are required. In this context, this investigation quantified the efficacy and limitations of remote images collected with an unmanned aerial vehicle (UAV) for early detection of weed seedlings. The ability to discriminate weeds was significantly affected by the imagery spectral (type of camera), spatial (flight altitude) and temporal (the date of the study) resolutions. The colour-infrared images captured at 40 m and 50 days after sowing (date 2), when plants had 5-6 true leaves, had the highest weed detection accuracy (up to 91%). At this flight altitude, the images captured before date 2 had slightly better results than the images captured later. However, this trend changed in the visible-light images captured at 60 m and higher, which had notably better results on date 3 (57 days after sowing) because of the larger size of the weed plants. Our results showed the requirements on spectral and spatial resolutions needed to generate a suitable weed map early in the growing season, as well as the best moment for the UAV image acquisition, with the ultimate objective of applying site-specific weed management operations.

Using the two-source capture-recapture method to estimate the incidence of acute flaccid paralysis in Victoria, Australia.

PubMed Central

Whitfield, Kathryn; Kelly, Heath

2002-01-01

OBJECTIVE: To estimate the incidence and the completeness of ascertainment of acute flaccid paralysis (AFP) in Victoria, Australia, in 1998-2000 and to determine its common causes among children aged under 15 years. METHODS:: The two-source capture-recapture method was used to estimate the incidence of cases of AFP and to evaluate case ascertainment in the routine surveillance system. The primary and secondary data sources were notifications from this system and inpatient hospital records, respectively. FINDINGS: The routine surveillance system indicated that there were 14 cases and the hospital record review identified 19 additional cases. According to the two-source capture-recapture method, there would have been 40 cases during this period (95% confidence interval (CI) = 29-51), representing an average annual incidence of 1.4 per 100000 children aged under 15 years (95% CI = 1.1- 1.7). Thus case ascertainment based on routine surveillance was estimated to be 35% complete. Guillain-Barré syndrome was the commonest single cause of AFP. CONCLUSIONS: Routine surveillance for AFP in Victoria was insensitive. A literature review indicated that the capture-recapture estimates obtained in this study were plausible. The present results help to define a target notification rate for surveillance in settings where poliomyelitis is not endemic. PMID:12481205

Automated Video Based Facial Expression Analysis of Neuropsychiatric Disorders

PubMed Central

Wang, Peng; Barrett, Frederick; Martin, Elizabeth; Milanova, Marina; Gur, Raquel E.; Gur, Ruben C.; Kohler, Christian; Verma, Ragini

2008-01-01

Deficits in emotional expression are prominent in several neuropsychiatric disorders, including schizophrenia. Available clinical facial expression evaluations provide subjective and qualitative measurements, which are based on static 2D images that do not capture the temporal dynamics and subtleties of expression changes. Therefore, there is a need for automated, objective and quantitative measurements of facial expressions captured using videos. This paper presents a computational framework that creates probabilistic expression profiles for video data and can potentially help to automatically quantify emotional expression differences between patients with neuropsychiatric disorders and healthy controls. Our method automatically detects and tracks facial landmarks in videos, and then extracts geometric features to characterize facial expression changes. To analyze temporal facial expression changes, we employ probabilistic classifiers that analyze facial expressions in individual frames, and then propagate the probabilities throughout the video to capture the temporal characteristics of facial expressions. The applications of our method to healthy controls and case studies of patients with schizophrenia and Asperger’s syndrome demonstrate the capability of the video-based expression analysis method in capturing subtleties of facial expression. Such results can pave the way for a video based method for quantitative analysis of facial expressions in clinical research of disorders that cause affective deficits. PMID:18045693

Density estimation in a wolverine population using spatial capture-recapture models

USGS Publications Warehouse

Royle, J. Andrew; Magoun, Audrey J.; Gardner, Beth; Valkenbury, Patrick; Lowell, Richard E.; McKelvey, Kevin

2011-01-01

Classical closed-population capture-recapture models do not accommodate the spatial information inherent in encounter history data obtained from camera-trapping studies. As a result, individual heterogeneity in encounter probability is induced, and it is not possible to estimate density objectively because trap arrays do not have a well-defined sample area. We applied newly-developed, capture-recapture models that accommodate the spatial attribute inherent in capture-recapture data to a population of wolverines (Gulo gulo) in Southeast Alaska in 2008. We used camera-trapping data collected from 37 cameras in a 2,140-km2 area of forested and open habitats largely enclosed by ocean and glacial icefields. We detected 21 unique individuals 115 times. Wolverines exhibited a strong positive trap response, with an increased tendency to revisit previously visited traps. Under the trap-response model, we estimated wolverine density at 9.7 individuals/1,000-km2(95% Bayesian CI: 5.9-15.0). Our model provides a formal statistical framework for estimating density from wolverine camera-trapping studies that accounts for a behavioral response due to baited traps. Further, our model-based estimator does not have strict requirements about the spatial configuration of traps or length of trapping sessions, providing considerable operational flexibility in the development of field studies.

Quantifying Efficacy and Limits of Unmanned Aerial Vehicle (UAV) Technology for Weed Seedling Detection as Affected by Sensor Resolution

PubMed Central

Peña, José M.; Torres-Sánchez, Jorge; Serrano-Pérez, Angélica; de Castro, Ana I.; López-Granados, Francisca

2015-01-01

In order to optimize the application of herbicides in weed-crop systems, accurate and timely weed maps of the crop-field are required. In this context, this investigation quantified the efficacy and limitations of remote images collected with an unmanned aerial vehicle (UAV) for early detection of weed seedlings. The ability to discriminate weeds was significantly affected by the imagery spectral (type of camera), spatial (flight altitude) and temporal (the date of the study) resolutions. The colour-infrared images captured at 40 m and 50 days after sowing (date 2), when plants had 5–6 true leaves, had the highest weed detection accuracy (up to 91%). At this flight altitude, the images captured before date 2 had slightly better results than the images captured later. However, this trend changed in the visible-light images captured at 60 m and higher, which had notably better results on date 3 (57 days after sowing) because of the larger size of the weed plants. Our results showed the requirements on spectral and spatial resolutions needed to generate a suitable weed map early in the growing season, as well as the best moment for the UAV image acquisition, with the ultimate objective of applying site-specific weed management operations. PMID:25756867

Validity of Soccer Injury Data from the National Collegiate Athletic Association's Injury Surveillance System

PubMed Central

Kucera, Kristen L.; Marshall, Stephen W.; Bell, David R.; DiStefano, Michael J.; Goerger, Candice P.; Oyama, Sakiko

2011-01-01

Context: Few validation studies of sport injury-surveillance systems are available. Objective: To determine the validity of a Web-based system for surveillance of collegiate sport injuries, the Injury Surveillance System (ISS) of the National Collegiate Athletic Association's (NCAA). Design: Validation study comparing NCAA ISS data from 2 fall collegiate sports (men's and women's soccer) with other types of clinical records maintained by certified athletic trainers. Setting: A purposive sample of 15 NCAA colleges and universities that provided NCAA ISS data on both men's and women's soccer for at least 2 years during 2005–2007, stratified by playing division. Patients or Other Participants: A total of 737 men's and women's soccer athletes and 37 athletic trainers at these 15 institutions. Main Outcome Measure(s): The proportion of injuries captured by the NCAA ISS (capture rate) was estimated by comparing NCAA ISS data with the other clinical records on the same athletes maintained by the athletic trainers. We reviewed all athletic injury events resulting from participation in NCAA collegiate sports that resulted in 1 day or more of restricted activity in games or practices and necessitated medical care. A capture-recapture analysis estimated the proportion of injury events captured by the NCAA ISS. Agreement for key data fields was also measured. Results: We analyzed 664 injury events. The NCAA ISS captured 88.3% (95% confidence interval = 85.9%, 90.8%) of all time-lost medical-attention injury events. The proportion of injury events captured by the NCAA ISS was higher in Division I (93.8%) and Division II (89.6%) than in Division III (82.3%) schools. Agreement between the NCAA ISS data and the non–NCAA ISS data was good for the majority of data fields but low for date of full return and days lost from sport participation. Conclusions: The overall capture rate of the NCAA ISS was very good (88%) in men's and women's soccer for this period. PMID:22488136

Visually driven chaining of elementary swim patterns into a goal-directed motor sequence: a virtual reality study of zebrafish prey capture

PubMed Central

Trivedi, Chintan A.; Bollmann, Johann H.

2013-01-01

Prey capture behavior critically depends on rapid processing of sensory input in order to track, approach, and catch the target. When using vision, the nervous system faces the problem of extracting relevant information from a continuous stream of input in order to detect and categorize visible objects as potential prey and to select appropriate motor patterns for approach. For prey capture, many vertebrates exhibit intermittent locomotion, in which discrete motor patterns are chained into a sequence, interrupted by short periods of rest. Here, using high-speed recordings of full-length prey capture sequences performed by freely swimming zebrafish larvae in the presence of a single paramecium, we provide a detailed kinematic analysis of first and subsequent swim bouts during prey capture. Using Fourier analysis, we show that individual swim bouts represent an elementary motor pattern. Changes in orientation are directed toward the target on a graded scale and are implemented by an asymmetric tail bend component superimposed on this basic motor pattern. To further investigate the role of visual feedback on the efficiency and speed of this complex behavior, we developed a closed-loop virtual reality setup in which minimally restrained larvae recapitulated interconnected swim patterns closely resembling those observed during prey capture in freely moving fish. Systematic variation of stimulus properties showed that prey capture is initiated within a narrow range of stimulus size and velocity. Furthermore, variations in the delay and location of swim triggered visual feedback showed that the reaction time of secondary and later swims is shorter for stimuli that appear within a narrow spatio-temporal window following a swim. This suggests that the larva may generate an expectation of stimulus position, which enables accelerated motor sequencing if the expectation is met by appropriate visual feedback. PMID:23675322

Characteristics of work-related fatal and hospitalised injuries not captured in workers’ compensation data

PubMed Central

Koehoorn, M; Tamburic, L; Xu, F; Alamgir, H; Demers, P A; McLeod, C B

2015-01-01

Objectives (1) To identify work-related fatal and non-fatal hospitalised injuries using multiple data sources, (2) to compare case-ascertainment from external data sources with accepted workers’ compensation claims and (3) to investigate the characteristics of work-related fatal and hospitalised injuries not captured by workers’ compensation. Methods Work-related fatal injuries were ascertained from vital statistics, coroners and hospital discharge databases using payment and diagnosis codes and injury and work descriptions; and work-related (non-fatal) injuries were ascertained from the hospital discharge database using admission, diagnosis and payment codes. Injuries for British Columbia residents aged 15–64 years from 1991 to 2009 ascertained from the above external data sources were compared to accepted workers’ compensation claims using per cent captured, validity analyses and logistic regression. Results The majority of work-related fatal injuries identified in the coroners data (83%) and the majority of work-related hospitalised injuries (95%) were captured as an accepted workers’ compensation claim. A work-related coroner report was a positive predictor (88%), and the responsibility of payment field in the hospital discharge record a sensitive indicator (94%), for a workers’ compensation claim. Injuries not captured by workers’ compensation were associated with female gender, type of work (natural resources and other unspecified work) and injury diagnosis (eg, airway-related, dislocations and undetermined/unknown injury). Conclusions Some work-related injuries captured by external data sources were not found in workers’ compensation data in British Columbia. This may be the result of capturing injuries or workers that are ineligible for workers’ compensation, or the result of injuries that go unreported to the compensation system. Hospital discharge records and coroner reports may provide opportunities to identify workers (or family members) with an unreported work-related injury and to provide them with information for submitting a workers’ compensation claim. PMID:25713157

Policing Farm Animal Welfare in Federated Nations: The Problem of Dual Federalism in Canada and the USA.

PubMed

Whiting, Terry L

2013-12-02

In recent European animal welfare statutes, human actions injurious to animals are new "offences" articulated as an injury to societal norms in addition to property damage. A crime is foremost a violation of a community moral standard. Violating a societal norm puts society out of balance and justice is served when that balance is returned. Criminal law normally requires the presence of mens rea, or evil intent, a particular state of mind; however, dereliction of duties towards animals (or children) is usually described as being of varying levels of negligence but, rarely can be so egregious that it constitutes criminal societal injury. In instrumental justice, the "public goods" delivered by criminal law are commonly classified as retribution, incapacitation and general deterrence. Prevention is a small, if present, outcome of criminal justice. Quazi-criminal law intends to establish certain expected (moral) standards of human behavior where by statute, the obligations of one party to another are clearly articulated as strict liability. Although largely moral in nature, this class of laws focuses on achieving compliance, thereby resulting in prevention. For example, protecting the environment from degradation is a benefit to society; punishing non-compliance, as is the application of criminal law, will not prevent the injury. This paper will provide evidence that the integrated meat complex of Canada and the USA is not in a good position to make changes to implement a credible farm animal protection system.

Health condition assessment for vegetation exposed to heavy metal pollution through airborne hyperspectral data.

PubMed

Banerjee, Bikram Pratap; Raval, Simit; Zhai, Hao; Cullen, Patrick Joseph

2017-11-03

Recent advancements in hyperspectral remote sensing technology now provide improved diagnostic capabilities to assess vegetation health conditions. This paper uses a set of 13 vegetation health indices related to chlorophyll, xanthophyll, blue/green/red ratio and structure from airborne hyperspectral reflectance data collected around a derelict mining area in Yerranderie, New South Wales, Australia. The studied area has ten historic mine shafts with a legacy of heavy metals and acidic contamination in a pristine ecosystem now recognised as Great Blue Mountain World Heritage Area. The forest is predominantly comprised of different species of Eucalyptus trees. In addition to the airborne survey, ground-based spectra of the tree leaves were collected along the two accessible heavy metal contaminated pathways. The stream networks in the area were classified and the geospatial patterns of vegetation health were analysed along the Tonalli River, a major water tributary flowing through the National Park. Despite the inflow of contaminated water from the near-mine streams, the measured vegetation health indices along Tonalli River were found to remain unchanged. The responses of the vegetation health indices between the near-mine and away-mine streams were found similar. Based on the along-stream and inter-stream analysis of the spectral indices of vegetation health, no significant impact of the heavy metal pollution could be noticed. The results indicate the possibility of the vegetation having developed immunity towards the high levels of heavy metal pollution over a century of exposure.

A Framework for Realistic Modeling and Display of Object Surface Appearance

NASA Astrophysics Data System (ADS)

Darling, Benjamin A.

With advances in screen and video hardware technology, the type of content presented on computers has progressed from text and simple shapes to high-resolution photographs, photorealistic renderings, and high-definition video. At the same time, there have been significant advances in the area of content capture, with the development of devices and methods for creating rich digital representations of real-world objects. Unlike photo or video capture, which provide a fixed record of the light in a scene, these new technologies provide information on the underlying properties of the objects, allowing their appearance to be simulated for novel lighting and viewing conditions. These capabilities provide an opportunity to continue the computer display progression, from high-fidelity image presentations to digital surrogates that recreate the experience of directly viewing objects in the real world. In this dissertation, a framework was developed for representing objects with complex color, gloss, and texture properties and displaying them onscreen to appear as if they are part of the real-world environment. At its core, there is a conceptual shift from a traditional image-based display workflow to an object-based one. Instead of presenting the stored patterns of light from a scene, the objective is to reproduce the appearance attributes of a stored object by simulating its dynamic patterns of light for the real viewing and lighting geometry. This is accomplished using a computational approach where the physical light sources are modeled and the observer and display screen are actively tracked. Surface colors are calculated for the real spectral composition of the illumination with a custom multispectral rendering pipeline. In a set of experiments, the accuracy of color and gloss reproduction was evaluated by measuring the screen directly with a spectroradiometer. Gloss reproduction was assessed by comparing gonio measurements of the screen output to measurements of the real samples in the same measurement configuration. A chromatic adaptation experiment was performed to evaluate color appearance in the framework and explore the factors that contribute to differences when viewing self-luminous displays as opposed to reflective objects. A set of sample applications was developed to demonstrate the potential utility of the object display technology for digital proofing, psychophysical testing, and artwork display.

Multispectral laser-induced fluorescence imaging system for large biological samples

NASA Astrophysics Data System (ADS)

Kim, Moon S.; Lefcourt, Alan M.; Chen, Yud-Ren

2003-07-01

A laser-induced fluorescence imaging system developed to capture multispectral fluorescence emission images simultaneously from a relatively large target object is described. With an expanded, 355-nm Nd:YAG laser as the excitation source, the system captures fluorescence emission images in the blue, green, red, and far-red regions of the spectrum centered at 450, 550, 678, and 730 nm, respectively, from a 30-cm-diameter target area in ambient light. Images of apples and of pork meat artificially contaminated with diluted animal feces have demonstrated the versatility of fluorescence imaging techniques for potential applications in food safety inspection. Regions of contamination, including sites that were not readily visible to the human eye, could easily be identified from the images.

Surgical sterilization of free-ranging wolves.

PubMed

Spence, C E; Kenyon, J E; Smith, D R; Hayes, R D; Baer, A M

1999-02-01

The objective of the study was to determine whether surgical sterilization of both males and females in wolf pairs alters basic wolf social and territorial behaviors. Wolves were located from the air by snow-tracking methods and were tranquilizer-darted from a helicopter. Surgeries were performed either in a tent at the capture site or in a heated building in a nearby village. Six vasectomies and seven uterine horn ligations were performed in January and February of 1996 and 1997. Two females died: one likely related to the capture procedure, the other of a peritonitis unrelated to the surgery. One wolf had a litter. None of the wolves have shown changes in behavioral patterns. Surgical sterilization can be effective, but other, less invasive, fertility control techniques should be investigated.

The Role of Age, Working Memory, and Response Inhibition in Deviance Distraction: A Cross-Sectional Study

ERIC Educational Resources Information Center

Leiva, Alicia; Andrés, Pilar; Servera, Mateu; Verbruggen, Frederick; Parmentier, Fabrice B. R.

2016-01-01

Sounds deviating from an otherwise repeated or structured sequence capture attention and affect performance in an ongoing visual task negatively, testament to the balance between selective attention and change detection. Although deviance distraction has been the object of much research, its modulation across the life span has been more scarcely…

Fertilizer value of nitrogen captured using ammonia scrubbers attached to animal production facilities

USDA-ARS?s Scientific Manuscript database

Over half of the nitrogen (N) excreted from broiler chickens is lost to the atmosphere before the manure is removed from the barns, resulting in air and water pollution and the loss of a valuable fertilizer resource. The objective of this study was to determine the fertilizer efficiency of N, which...

Psychopathic Predators? Getting Specific about the Relation between Psychopathy and Violence

ERIC Educational Resources Information Center

Camp, Jacqueline P.; Skeem, Jennifer L.; Barchard, Kimberly; Lilienfeld, Scott O.; Poythress, Norman G.

2013-01-01

Objective: The Psychopathy Checklist-Revised (PCL-R; Hare, 1991, 2003) is often used to assess risk of violence, perhaps based on the assumption that it captures emotionally detached individuals who are driven to prey upon others. This study is designed to assess the relation between (a) core interpersonal and affective traits of psychopathy and…

Plethodontid salamander population ecology in managed forest headwaters in the Oregon coast range

Treesearch

Matthew R. Kluber; Deanna H. Olson

2013-01-01

We examined temporal and spatial patterns of terrestrial amphibian species abundances and individual movements in western Oregon managed headwater forest stands using artifi cial cover object (ACO) arrays. Using mark-recapture methods, we estimated the eff ects of species and seasonality on apparent survival rates and recapture probabilities. We captured, marked, and...