Autumn Leaf Chromatography.

ERIC Educational Resources Information Center

Scharmann, Lawrence C.

1984-01-01

Describes an experiment designed to introduce students to chromatographic techniques. Also describes a teacher demonstration in which leaves obtained during the spring and fall are analyzed using chromatography. Procedures for both the experiment and the demonstration are outlined. (JN)

Characterizing Variability in Smestad and Gratzel's Nanocrystalline Solar Cells: A Collaborative Learning Experience in Experimental Design

ERIC Educational Resources Information Center

Lawson, John; Aggarwal, Pankaj; Leininger, Thomas; Fairchild, Kenneth

2011-01-01

This article describes a collaborative learning experience in experimental design that closely approximates what practicing statisticians and researchers in applied science experience during consulting. Statistics majors worked with a teaching assistant from the chemistry department to conduct a series of experiments characterizing the variation…

Application of optimal design methodologies in clinical pharmacology experiments.

PubMed

Ogungbenro, Kayode; Dokoumetzidis, Aristides; Aarons, Leon

2009-01-01

Pharmacokinetics and pharmacodynamics data are often analysed by mixed-effects modelling techniques (also known as population analysis), which has become a standard tool in the pharmaceutical industries for drug development. The last 10 years has witnessed considerable interest in the application of experimental design theories to population pharmacokinetic and pharmacodynamic experiments. Design of population pharmacokinetic experiments involves selection and a careful balance of a number of design factors. Optimal design theory uses prior information about the model and parameter estimates to optimize a function of the Fisher information matrix to obtain the best combination of the design factors. This paper provides a review of the different approaches that have been described in the literature for optimal design of population pharmacokinetic and pharmacodynamic experiments. It describes options that are available and highlights some of the issues that could be of concern as regards practical application. It also discusses areas of application of optimal design theories in clinical pharmacology experiments. It is expected that as the awareness about the benefits of this approach increases, more people will embrace it and ultimately will lead to more efficient population pharmacokinetic and pharmacodynamic experiments and can also help to reduce both cost and time during drug development. Copyright (c) 2008 John Wiley & Sons, Ltd.

Path to AWAKE: Evolution of the concept

DOE PAGES

Caldwell, A.; Adli, E.; Amorim, L.; ...

2016-01-02

This study describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability – a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of themore » AWAKE design and construction status as presented in this conference is given in Gschwendtner et al. [1] .« less

The "Tutorless" Design Studio: A Radical Experiment in Blended Learning

ERIC Educational Resources Information Center

Hill, Glen Andrew

2017-01-01

This paper describes a pedagogical experiment in which a suite of novel blended learning strategies was used to replace the traditional role of design tutors in a first year architectural design studio. The pedagogical objectives, blended learning strategies and outcomes of the course are detailed. While the quality of the student design work…

JPL solar power experiments

NASA Technical Reports Server (NTRS)

Yasui, R. K.

1976-01-01

Report describes evolution of photovoltaic power systems designed and built for terrestrial use. Discussion focuses on technological problems impeding further systems development. Experiments and test data on seven types of solar panels and six material test specimens are described in detail.

Seeing is Believing: Video Mock-Ups to Evaluate and Demonstrate Multimedia Designs

ERIC Educational Resources Information Center

Fadde, Peter J.

2007-01-01

A video mock-up is a "design story", described by Patrick Parrish in a recent "TechTrends" article as "imagining the journey of a learner's experience in engaging with a finished design". A design story allows designers to show their design vision to others and to observe features and benefits of the program as a learner would experience it. The…

Plume Measurement System (PLUMES) Calibration Experiment

DTIC Science & Technology

1994-08-01

calibration chamber was lished and documented. To apply acoustic designed and built Particles were suspended technology to monitoring suspended sedi- in the...procedures are described in Chap- ter 2. Repeatability of the experiments and validity of the results are de - scribed in Chapter 3. In Chapter 4, the range...went into their design . The first two subsections give an overview of the calibration chamber and its characteristics. The remaining subsections describe

Robotics Focused Capstone Senior Design Course

ERIC Educational Resources Information Center

Rios-Gutierrez, Fernando; Alba-Flores, Rocio

2017-01-01

This work describes the educational experiences gained teaching the Senior Design I & II courses, a senior level, two-semester sequence in the Electrical Engineering (EE) program at Georgia Southern University (GSU). In particular, the authors present their experiences in using robotics as the main area to develop the capstone senior design,…

Fuel-Air Mixing and Combustion in Scramjets

NASA Technical Reports Server (NTRS)

Drummond, J. P.; Diskin, Glenn S.; Cutler, A. D.

2002-01-01

Activities in the area of scramjet fuel-air mixing and combustion associated with the Research and Technology Organization Working Group on Technologies for Propelled Hypersonic Flight are described. Work discussed in this paper has centered on the design of two basic experiments for studying the mixing and combustion of fuel and air in a scramjet. Simulations were conducted to aid in the design of these experiments. The experimental models were then constructed, and data were collected in the laboratory. Comparison of the data from a coaxial jet mixing experiment and a supersonic combustor experiment with a combustor code were then made and described. This work was conducted by NATO to validate combustion codes currently employed in scramjet design and to aid in the development of improved turbulence and combustion models employed by the codes.

Human experience and product usability: principles to assist the design of user-product interactions.

PubMed

Chamorro-Koc, Marianella; Popovic, Vesna; Emmison, Michael

2009-07-01

This paper introduces research that investigates how human experience influences people's understandings of product usability. It describes an experiment that employs visual representation of concepts to elicit participants' ideas of a product's use. Results from the experiment lead to the identification of relationships between human experience, knowledge, and context-of-use--relationships that influence designers' and users' concepts of product usability. These relationships are translated into design principles that inform the design activity with respect to the aspects of experience that trigger people's understanding of a product's use. A design tool (ECEDT) is devised to aid designers in the application of these principles. This tool is then trialled in the context of a design task in order to verify applicability of the findings.

Design and implementation of an internet-based electrical engineering laboratory.

PubMed

He, Zhenlei; Shen, Zhangbiao; Zhu, Shanan

2014-09-01

This paper describes an internet-based electrical engineering laboratory (IEE-Lab) with virtual and physical experiments at Zhejiang University. In order to synthesize the advantages of both experiment styles, the IEE-Lab is come up with Client/Server/Application framework and combines the virtual and physical experiments. The design and workflow of IEE-Lab are introduced. The analog electronic experiment is taken as an example to show Flex plug-in design, data communication based on XML (Extensible Markup Language), experiment simulation modeled by Modelica and control terminals' design. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Threats to the Internal Validity of Experimental and Quasi-Experimental Research in Healthcare.

PubMed

Flannelly, Kevin J; Flannelly, Laura T; Jankowski, Katherine R B

2018-01-01

The article defines, describes, and discusses the seven threats to the internal validity of experiments discussed by Donald T. Campbell in his classic 1957 article: history, maturation, testing, instrument decay, statistical regression, selection, and mortality. These concepts are said to be threats to the internal validity of experiments because they pose alternate explanations for the apparent causal relationship between the independent variable and dependent variable of an experiment if they are not adequately controlled. A series of simple diagrams illustrate three pre-experimental designs and three true experimental designs discussed by Campbell in 1957 and several quasi-experimental designs described in his book written with Julian C. Stanley in 1966. The current article explains why each design controls for or fails to control for these seven threats to internal validity.

Two Electrophoresis Experiments for Freshmen in the Health Professions.

ERIC Educational Resources Information Center

Brabson, G. Dana; Waugh, David S.

1986-01-01

Describes procedures involved with paper electrophoresis separation of amino acids, gel electrophoresis separation of DNA, and design of an electrophoresis tank. Describes experiments using paper (amino acids) and gel (deoxyribonucleic acid fragments). Provides material lists, procedures, and discussion. (JM)

Polarimetric receiver in the forty gigahertz band: new instrument for the Q-U-I joint Tenerife experiment

NASA Astrophysics Data System (ADS)

Villa, Enrique; Cano, Juan L.; Aja, Beatriz; Terán, J. Vicente; de la Fuente, Luisa; Mediavilla, Ángel; Artal, Eduardo

2018-03-01

This paper describes the analysis, design and characterization of a polarimetric receiver developed for covering the 35 to 47 GHz frequency band in the new instrument aimed at completing the ground-based Q-U-I Joint Tenerife Experiment. This experiment is designed to measure polarization in the Cosmic Microwave Background. The described high frequency instrument is a HEMT-based array composed of 29 pixels. A thorough analysis of the behaviour of the proposed receiver, based on electronic phase switching, is presented for a noise-like linearly polarized input signal, obtaining simultaneously I, Q and U Stokes parameters of the input signal. Wideband subsystems are designed, assembled and characterized for the polarimeter. Their performances are described showing appropriate results within the 35-to-47 GHz frequency band. Functionality tests are performed at room and cryogenic temperatures with adequate results for both temperature conditions, which validate the receiver concept and performance.

A Program for Simulated Thermodynamic Experiments.

ERIC Educational Resources Information Center

Olds, Dan W.

A time-sharing FORTRAN program is described. It was created to allow a student to design and perform classical thermodynamic experiments on three models of a working substance. One goal was to develop a simulation which gave the student maximum freedom and responsibility in the design of the experiment and provided only the primary experimental…

Development of the Design Laboratory.

ERIC Educational Resources Information Center

Silla, Harry

1986-01-01

Describes the design laboratory at the Stevens Institute of Technology (SIT). Considers course objectives, design projects, project structure, mechanical design, project management, and laboratory operation. This laboratory complements SIT's course in process design, giving students a complete design experience. (JN)

Using Multiple Dialog Modes in a User-System Interface to Accomodate Different Levels of User Experience: An Experimental Study.

DTIC Science & Technology

1986-01-01

Chapter it Research Methodology This chapter describes the methodology and the experimental design used for this research. Prior to discussing the...50 Experimental Design ............................... 50 Task/Treatm ent ................................... 55 Task Design ...Figure 3.3 Interface Experiment Elements ............... 54 Figure 3.4 Experimental Design ....................... 55 Figure 3.5 Subject Assignment

Ideas in Practice (3): A Simulated Laboratory Experience in Digital Design.

ERIC Educational Resources Information Center

Cleaver, Thomas G.

1988-01-01

Gives an example of the use of a simplified logic simulator in a logic design course. Discusses some problems in logic design classes, commercially available software, and software problems. Describes computer-aided engineering (CAE) software. Lists 14 experiments in the simulated laboratory and presents students' evaluation of the course. (YP)

Adaptive multibeam phased array design for a Spacelab experiment

NASA Technical Reports Server (NTRS)

Noji, T. T.; Fass, S.; Fuoco, A. M.; Wang, C. D.

1977-01-01

The parametric tradeoff analyses and design for an Adaptive Multibeam Phased Array (AMPA) for a Spacelab experiment are described. This AMPA Experiment System was designed with particular emphasis to maximize channel capacity and minimize implementation and cost impacts for future austere maritime and aeronautical users, operating with a low gain hemispherical coverage antenna element, low effective radiated power, and low antenna gain-to-system noise temperature ratio.

Merlin: Computer-Aided Oligonucleotide Design for Large Scale Genome Engineering with MAGE.

PubMed

Quintin, Michael; Ma, Natalie J; Ahmed, Samir; Bhatia, Swapnil; Lewis, Aaron; Isaacs, Farren J; Densmore, Douglas

2016-06-17

Genome engineering technologies now enable precise manipulation of organism genotype, but can be limited in scalability by their design requirements. Here we describe Merlin ( http://merlincad.org ), an open-source web-based tool to assist biologists in designing experiments using multiplex automated genome engineering (MAGE). Merlin provides methods to generate pools of single-stranded DNA oligonucleotides (oligos) for MAGE experiments by performing free energy calculation and BLAST scoring on a sliding window spanning the targeted site. These oligos are designed not only to improve recombination efficiency, but also to minimize off-target interactions. The application further assists experiment planning by reporting predicted allelic replacement rates after multiple MAGE cycles, and enables rapid result validation by generating primer sequences for multiplexed allele-specific colony PCR. Here we describe the Merlin oligo and primer design procedures and validate their functionality compared to OptMAGE by eliminating seven AvrII restriction sites from the Escherichia coli genome.

Basic Hitchhiker Payload Requirements

NASA Technical Reports Server (NTRS)

Horan, Stephen

1999-01-01

This document lists the requirements for the NMSU Hitchhiker experiment payload that were developed as part of the EE 498/499 Capstone Design class during the 1999-2000 academic year. This document is used to describe the system needs as described in the mission document. The requirements listed here are those primarily used to generate the basic electronic and data processing requirements developed in the class design document. The needs of the experiment components are more fully described in the draft NASA hitchhiker customer requirements document. Many of the details for the overall payload are given in full detail in the NASA hitchhiker documentation.

Engineering the Lidar In-space Technology Experiment

NASA Technical Reports Server (NTRS)

Couch, Richard H.; Moore, Chris L.

1992-01-01

The Lidar In-space Technology Experiment (LITE) is being developed by NASA for flight on the Space Shuttle in early 1994. A discussion of the NASA four-phase design process is followed by a short history of the experiment heritage. The instrument is then described at the subsystem level from an engineering point of view, with special emphasis on the laser and the receiver. Some aspects of designing for the space environment are discussed, as well as the importance of contamination control, and product assurance. Finally, the instrument integration and test process is described and the current status of the instrument development is given.

Statistical issues in quality control of proteomic analyses: good experimental design and planning.

PubMed

Cairns, David A

2011-03-01

Quality control is becoming increasingly important in proteomic investigations as experiments become more multivariate and quantitative. Quality control applies to all stages of an investigation and statistics can play a key role. In this review, the role of statistical ideas in the design and planning of an investigation is described. This involves the design of unbiased experiments using key concepts from statistical experimental design, the understanding of the biological and analytical variation in a system using variance components analysis and the determination of a required sample size to perform a statistically powerful investigation. These concepts are described through simple examples and an example data set from a 2-D DIGE pilot experiment. Each of these concepts can prove useful in producing better and more reproducible data. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design and Status of RERTR Irradiation Tests in the Advanced Test Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel M. Wachs; Richard G. Ambrosek; Gray Chang

2006-10-01

Irradiation testing of U-Mo based fuels is the central component of the Reduced Enrichment for Research and Test Reactors (RERTR) program fuel qualification plan. Several RERTR tests have recently been completed or are planned for irradiation in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory in Idaho Falls, ID. Four mini-plate experiments in various stages of completion are described in detail, including the irradiation test design, objectives, and irradiation conditions. Observations made during and after the in-reactor RERTR-7A experiment breach are summarized. The irradiation experiment design and planned irradiation conditions for full-size plate test are described. Progressmore » toward element testing will be reviewed.« less

Designing New Academic Pathways: Reimaging the Community College Experience with Students' Needs and Best Interests at Heart

ERIC Educational Resources Information Center

McClenney, Kay; Dare, Donna

2013-01-01

This is the second article in a three-part series on reimagining the community college student experience, describing a new model for academic pathways, key design principles, examples from colleges leading the way, and implementation challenges. Community colleges are beginning to embrace the task of reimagining students' educational experiences.…

Using Student Peer Review of Experiment Reports in an Undergraduate Physics Class

ERIC Educational Resources Information Center

Moran, Timothy; Van Hook, Stephen J.

2006-01-01

A class centered on student design of experiments and peer review of the resulting reports is described. Thirteen students in an honors seminar section of an introductory physics class designed experiments to test various types of paranormal phenomena. Each experimental report was evaluated and ranked by several other students. To give them…

Applications of Electronic Devices in the Sixth Form Laboratory

ERIC Educational Resources Information Center

Dyson, J. E.

1974-01-01

Described are two experiments using electronic circuits designed for the activities. The first experiment is Ruchardt's experiment and the second demonstrates the distribution of velocity of electrons. (RH)

"When Mathematical Activity Moves You": An Exploration of the Design and Use of Purposefully Embodied Mathematical Activities, Models, Contexts, and Environments

ERIC Educational Resources Information Center

Campbell, William James

2017-01-01

This dissertation describes a mathematics curriculum and instruction design experiment involving a series of embodied mathematical activities conducted in two Colorado elementary schools Activities designed for this experiment include multi-scalar number line models focused on supporting students' understanding of elementary mathematics. Realistic…

Demystifying the Chemistry Literature: Building Information Literacy in First-Year Chemistry Students through Student-Centered Learning and Experiment Design

ERIC Educational Resources Information Center

Bruehl, Margaret; Pan, Denise; Ferrer-Vinent, Ignacio J.

2015-01-01

This paper describes curriculum modules developed for first-year general chemistry laboratory courses that use scientific literature and creative experiment design to build information literacy in a student-centered learning environment. Two curriculum units are discussed: Exploring Scientific Literature and Design Your Own General Chemistry…

Knowledge Interaction Design for Creative Knowledge Work

NASA Astrophysics Data System (ADS)

Nakakoji, Kumiyo; Yamamoto, Yasuhiro

This paper describes our approach for the development of application systems for creative knowledge work, particularly for early stages of information design tasks. Being a cognitive tool serving as a means of externalization, an application system affects how the user is engaged in the creative process through its visual interaction design. Knowledge interaction design described in this paper is a framework where a set of application systems for different information design domains are developed based on an interaction model, which is designed for a particular model of a thinking process. We have developed two sets of application systems using the knowledge interaction design framework: one includes systems for linear information design, such as writing, movie-editing, and video-analysis; the other includes systems for network information design, such as file-system navigation and hypertext authoring. Our experience shows that the resulting systems encourage users to follow a certain cognitive path through graceful user experience.

An Introductory Research Experience in Mathematics for Undergraduates

ERIC Educational Resources Information Center

Johnston, William W.; Webster, Jonathan E.; Wilson, Christopher James

2017-01-01

This paper offers a strategic initiative designed to boost the level of collaborative mathematical research involving undergraduate mathematics students at Butler University. It describes goals, program design, logistics, and outcomes for an 8-day intensive summer experience in which undergraduate mathematics majors engaged in original…

Shuttle wave experiments. [space plasma investigations: design and instrumentation

NASA Technical Reports Server (NTRS)

Calvert, W.

1976-01-01

Wave experiments on shuttle are needed to verify dispersion relations, to study nonlinear and exotic phenomena, to support other plasma experiments, and to test engineering designs. Techniques based on coherent detection and bistatic geometry are described. New instrumentation required to provide modules for a variety of missions and to incorporate advanced signal processing and control techniques is discussed. An experiment for Z to 0 coupling is included.

Design, development, and fabrication of a prototype ice pack heat sink subsystem. Flight experiment physical phenomena experiment chest

NASA Technical Reports Server (NTRS)

Roebelen, G. J., Jr.; Dean, W. C., II

1975-01-01

The concept of a flight experiment physical phenomena experiment chest, to be used eventually for investigating and demonstrating ice pack heat sink subsystem physical phenomena during a zero gravity flight experiment, is described.

NASA Ames Summer High School Apprenticeship Research Program

NASA Technical Reports Server (NTRS)

Powell, P.

1985-01-01

The Summer High School Apprenticeship Research Program (SHARP) is described. This program is designed to provide engineering experience for gifted female and minority high school students. The students from this work study program which features trips, lectures, written reports, and job experience describe their individual work with their mentors.

10 CFR 63.44 - Changes, tests, and experiments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... waste isolation that are described in the SAR (as updated); and (ii) The design and performance... isolation, are operated or controlled. (6) Tests or experiments not described in the SAR (as updated) means... components important to safety, or important to waste isolation, are utilized, controlled, or altered in a...

10 CFR 63.44 - Changes, tests, and experiments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... waste isolation that are described in the SAR (as updated); and (ii) The design and performance... isolation, are operated or controlled. (6) Tests or experiments not described in the SAR (as updated) means... components important to safety, or important to waste isolation, are utilized, controlled, or altered in a...

Reducing the complexity of the software design process with object-oriented design

NASA Technical Reports Server (NTRS)

Schuler, M. P.

1991-01-01

Designing software is a complex process. How object-oriented design (OOD), coupled with formalized documentation and tailored object diagraming techniques, can reduce the complexity of the software design process is described and illustrated. The described OOD methodology uses a hierarchical decomposition approach in which parent objects are decomposed into layers of lower level child objects. A method of tracking the assignment of requirements to design components is also included. Increases in the reusability, portability, and maintainability of the resulting products are also discussed. This method was built on a combination of existing technology, teaching experience, consulting experience, and feedback from design method users. The discussed concepts are applicable to hierarchal OOD processes in general. Emphasis is placed on improving the design process by documenting the details of the procedures involved and incorporating improvements into those procedures as they are developed.

Designing and Managing a Strategic Academic Alliance: An Australian University Experience

ERIC Educational Resources Information Center

Ryan, Lindsay; Morriss, Ross

2005-01-01

Purpose--This article outlines the experience and approach of an Australian university in developing and managing education program partnerships within industry. Design/methodology/approach--Describes how the university has established a specialist Strategic Partnerships unit for managing the customisation and delivery of postgraduate award…

Laboratory Experiments with Okapi: Participation in the TREC Programme.

ERIC Educational Resources Information Center

Robertson, S. E.; And Others

1997-01-01

Summarizes the development of information retrieval evaluation ideas, describes the design of the TREC (Text Retrieval Conference) experiments, and discusses the Okapi team's participation in TREC. Highlights include the Cranfield projects that tested the principles of information retrieval system design, test collections, weighting functions,…

Applying Real-Time UML: Real-World Experiences

NASA Astrophysics Data System (ADS)

Cooling, Niall; Pachschwoell, Stefan

2004-06-01

This paper presents Austrian Aerospace's experiences of applying UML for the design of an embedded real-time avionics system based on Feabhas' "Pragma Process". It describes the complete lifecycle from adoption of UML, through training, CASE-tool selection, system analysis, and software design and development of the project itself. It concludes by reflecting on the experiences obtained and some lessons learnt.

Thermal systems design and analysis for a 10 K Sorption Cryocooler flight experiment

NASA Technical Reports Server (NTRS)

Bhandari, Pradeep; Bard, Steven

1993-01-01

The design, analysis and predicted performance of the Brilliant Eyes Ten-Kelvin Sorption Cryocooler Experiment (BETSCE) is described from a thermal perspective. BETSCE is a shuttle side-wall mounted cryogenic technology demonstration experiment planned for launch in November 1994. BETSCE uses a significant amount of power (about 500 W peak) and the resultant heat must be rejected passively with radiators, as BETSCE has no access to the active cooling capability of the shuttle. It was a major challenge to design and configure the individual hardware assemblies, with their relatively large radiators, to enable them to reject their heat while satisfying numerous severe shuttle-imposed constraints. This paper is a useful case study of a small shuttle payload that needs to reject relatively high heat loads passively in a highly constrained thermal environment. The design approach described is consistent with today's era of 'faster, better, cheaper' small-scale space missions.

Interim Service ISDN Satellite (ISIS) hardware experiment design for advanced ISDN satellite design and experiments

NASA Technical Reports Server (NTRS)

Pepin, Gerard R.

1992-01-01

The Interim Service Integrated Services Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Design for Advanced Satellite Designs describes the design of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into time division multiple access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the V.35 interface for satellite uplink. The same ISTA converts in the opposite direction the V.35 to U-interface data with a simple switch setting.

Developing Young Children's Multidigit Number Sense.

ERIC Educational Resources Information Center

Diezmann, Carmel M.; English, Lyn D.

2001-01-01

This article describes a series of enrichment experiences designed to develop young (ages 5 to 8) gifted children's understanding of large numbers, central to their investigation of space travel. It describes activities designed to teach reading of large numbers and exploring numbers to a thousand and then a million. (Contains ten references.) (DB)

A laser communication experiment utilizing the ACT satellite and an airborne laser transceiver

NASA Technical Reports Server (NTRS)

Provencher, Charles E., Jr.; Spence, Rodney L.

1988-01-01

The launch of a laser communication transmitter package into geosynchronous Earth orbit onboard the Advanced Communications Technology Satellite (ACTS) will present an excellent opportunity for the experimental reception of laser communication signals transmitted from a space orbit. The ACTS laser package includes both a heterodyne transmitter (Lincoln Labs design) and a direct detection transmitter (Goddard Space Flight Center design) with both sharing some common optical components. NASA Lewis Research Center's Space Electronics Division is planning to perform a space communication experiment utilizing the GSFC direct detection laser transceiver. The laser receiver will be installed within an aircraft provided with a glass port for the reception of the signal. This paper describes the experiment and the approach to performing such an experiment. Described are the constraints placed on the NASA Lewis experiment by the performance parameters of the laser transmitter and by the ACTS spacecraft operations. The conceptual design of the receiving terminal is given; also included is the anticipated capability of the detector.

Analog pixel array detectors.

PubMed

Ercan, A; Tate, M W; Gruner, S M

2006-03-01

X-ray pixel array detectors (PADs) are generally thought of as either digital photon counters (DPADs) or X-ray analog-integrating pixel array detectors (APADs). Experiences with APADs, which are especially well suited for X-ray imaging experiments where transient or high instantaneous flux events must be recorded, are reported. The design, characterization and experimental applications of several APAD designs developed at Cornell University are discussed. The simplest design is a ;flash' architecture, wherein successive integrated X-ray images, as short as several hundred nanoseconds in duration, are stored in the detector chips for later off-chip digitization. Radiography experiments using a prototype flash APAD are summarized. Another design has been implemented that combines flash capability with the ability to continuously stream X-ray images at slower (e.g. milliseconds) rates. Progress is described towards radiation-hardened APADs that can be tiled to cover a large area. A mixed-mode PAD, design by combining many of the attractive features of both APADs and DPADs, is also described.

Applications of Chemiluminescence in the Teaching of Experimental Design

ERIC Educational Resources Information Center

Krawczyk, Tomasz; Slupska, Roksana; Baj, Stefan

2015-01-01

This work describes a single-session laboratory experiment devoted to teaching the principles of factorial experimental design. Students undertook the rational optimization of a luminol oxidation reaction, using a two-level experiment that aimed to create a long-lasting bright emission. During the session students used only simple glassware and…

Participatory Design of Citizen Science Experiments

ERIC Educational Resources Information Center

Senabre, Enric; Ferran-Ferrer, Nuria; Perelló, Josep

2018-01-01

This article describes and analyzes the collaborative design of a citizen science research project through co-creation. Three groups of secondary school students and a team of scientists conceived three experiments on human behavior and social capital in urban and public spaces. The study goal is to address how interdisciplinary work and attention…

Nuclear Power Plant Mechanical Component Flooding Fragility Experiments Status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, C. L.; Savage, B.; Johnson, B.

This report describes progress on Nuclear Power Plant mechanical component flooding fragility experiments and supporting research. The progress includes execution of full scale fragility experiments using hollow-core doors, design of improvements to the Portal Evaluation Tank, equipment procurement and initial installation of PET improvements, designation of experiments exploiting the improved PET capabilities, fragility mathematical model development, Smoothed Particle Hydrodynamic simulations, wave impact simulation device research, and pipe rupture mechanics research.

Ideal Gas Laws: Experiments for General Chemistry

ERIC Educational Resources Information Center

Deal, Walter J.

1975-01-01

Describes a series of experiments designed to verify the various relationships implicit in the ideal gas equation and shows that the success of the Graham's law effusion experiments can be explained by elementary hydrodynamics. (GS)

Exploring Novel Crystals and Designs for Acousto-Optic Devices

NASA Astrophysics Data System (ADS)

Pfeiffer, Jonathan B.

Acousto-optic devices are a versatile technology that are driven electronically to precisely and rapidly control the intensity, frequency, and propagation direction of a laser beam. Applications include acousto-optic scanners, filters, mode lockers, and modulators. Despite the popularity of acousto-optic devices, there currently is no UV transparent device that can satisfy the requirements of the atomic clock and quantum computing communities. In this thesis, I describe my experimental efforts for discovering a new UV transparent, acousto-optic crystal that can meet the experimental requirements. I also present my graphical representations for locating practical and efficient acousto-optic designs in a given medium. The first part of this thesis describes how to measure the elastic-stiffness and photoelastic coefficients of a given crystal. The elastic-stiffness coefficients are essential for designing acousto-optic devices because they determine the velocity, diffraction, and polarization of acoustic waves in a given medium. I used both resonant ultrasound spectroscopy and a modified version of Schaefer-Bergman diffraction to measure elastic coefficients. I discuss in detail the strengths, differences, and similarities of the two experiments. The photoelastic coefficients are necessary for determining the diffraction efficiency of a given acousto-optic geometry. Similar to the elastic coefficients, I employ a modified version of the Schaefer-Bergmann experiment to measure the photoelastic coefficients. I corroborate the measured results with the well established Dixon experiment. The second part of this thesis describes four different graphical representations that help locate practical and efficient acousto-optic designs. I describe in detail each algorithm and how to interpret the calculated results. Several examples are provided for commonly used acosuto-optic materials. The thesis concludes by describing the design and performance of an acousto-optic frequency shifter that was designed based on the culmination my research effort.

The use of experimental design to find the operating maximum power point of PEM fuel cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crăciunescu, Aurelian; Pătularu, Laurenţiu; Ciumbulea, Gloria

2015-03-10

Proton Exchange Membrane (PEM) Fuel Cells are difficult to model due to their complex nonlinear nature. In this paper, the development of a PEM Fuel Cells mathematical model based on the Design of Experiment methodology is described. The Design of Experiment provides a very efficient methodology to obtain a mathematical model for the studied multivariable system with only a few experiments. The obtained results can be used for optimization and control of the PEM Fuel Cells systems.

PNIC - A near infrared camera for testing focal plane arrays

NASA Astrophysics Data System (ADS)

Hereld, Mark; Harper, D. A.; Pernic, R. J.; Rauscher, Bernard J.

1990-07-01

This paper describes the design and the performance of the Astrophysical Research Consortium prototype near-infrared camera (pNIC) designed to test focal plane arrays both on and off the telescope. Special attention is given to the detector in pNIC, the mechanical and optical designs, the electronics, and the instrument interface. Experiments performed to illustrate the most salient aspects of pNIC are described.

Analysis of pre-service physics teacher skills designing simple physics experiments based technology

NASA Astrophysics Data System (ADS)

Susilawati; Huda, C.; Kurniawan, W.; Masturi; Khoiri, N.

2018-03-01

Pre-service physics teacher skill in designing simple experiment set is very important in adding understanding of student concept and practicing scientific skill in laboratory. This study describes the skills of physics students in designing simple experiments based technologicall. The experimental design stages include simple tool design and sensor modification. The research method used is descriptive method with the number of research samples 25 students and 5 variations of simple physics experimental design. Based on the results of interviews and observations obtained the results of pre-service physics teacher skill analysis in designing simple experimental physics charged technology is good. Based on observation result, pre-service physics teacher skill in designing simple experiment is good while modification and sensor application are still not good. This suggests that pre-service physics teacher still need a lot of practice and do experiments in designing physics experiments using sensor modifications. Based on the interview result, it is found that students have high enough motivation to perform laboratory activities actively and students have high curiosity to be skilled at making simple practicum tool for physics experiment.

The Huck Finn Experience.

ERIC Educational Resources Information Center

Levesque, Bonnie; And Others

This paper describes "The Huck Finn Experience," a high motivation interdisciplinary unit that takes students on a 6-week journey back to the life and times of Mark Twain through the fictional character of Huckleberry Finn. The unit described in the paper was designed for eighth-grade students but could be easily adapted to be successful…

Effect of Fused Filament Fabrication Process Parameters on the Mechanical Properties of Carbon Fiber Reinforced Polymers

DTIC Science & Technology

2017-09-14

averaging the gage measurements many specimens were not meeting the ASTM D3039 standard tolerance limitations when compared to the designed 3mm and 15 mm...MarkOne) 3D printer. A design of experiment (DOE) we preformed to develop a mathematical model describing the functional relationship between the...6 Design of Experiment (DOE) .................................................................................................. 6 Carbon Fiber

Interim Service ISDN Satellite (ISIS) network model for advanced satellite designs and experiments

NASA Technical Reports Server (NTRS)

Pepin, Gerard R.; Hager, E. Paul

1991-01-01

The Interim Service Integrated Services Digital Network (ISDN) Satellite (ISIS) Network Model for Advanced Satellite Designs and Experiments describes a model suitable for discrete event simulations. A top-down model design uses the Advanced Communications Technology Satellite (ACTS) as its basis. The ISDN modeling abstractions are added to permit the determination and performance for the NASA Satellite Communications Research (SCAR) Program.

Free Radical Polymerization of Styrene: A Radiotracer Experiment

ERIC Educational Resources Information Center

Mazza, R. J.

1975-01-01

Describes an experiment designed to acquaint the chemistry student with polymerization reactions, vacuum techniques, liquid scintillation counting, gas-liquid chromatography, and the handling of radioactive materials. (MLH)

A novel method for multifactorial bio-chemical experiments design based on combinational design theory.

PubMed

Wang, Xun; Sun, Beibei; Liu, Boyang; Fu, Yaping; Zheng, Pan

2017-01-01

Experimental design focuses on describing or explaining the multifactorial interactions that are hypothesized to reflect the variation. The design introduces conditions that may directly affect the variation, where particular conditions are purposely selected for observation. Combinatorial design theory deals with the existence, construction and properties of systems of finite sets whose arrangements satisfy generalized concepts of balance and/or symmetry. In this work, borrowing the concept of "balance" in combinatorial design theory, a novel method for multifactorial bio-chemical experiments design is proposed, where balanced templates in combinational design are used to select the conditions for observation. Balanced experimental data that covers all the influencing factors of experiments can be obtianed for further processing, such as training set for machine learning models. Finally, a software based on the proposed method is developed for designing experiments with covering influencing factors a certain number of times.

The 30/20 GHz flight experiment system, phase 2. Volume 2: Experiment system description

NASA Technical Reports Server (NTRS)

Bronstein, L.; Kawamoto, Y.; Ribarich, J. J.; Scope, J. R.; Forman, B. J.; Bergman, S. G.; Reisenfeld, S.

1981-01-01

A detailed technical description of the 30/20 GHz flight experiment system is presented. The overall communication system is described with performance analyses, communication operations, and experiment plans. Hardware descriptions of the payload are given with the tradeoff studies that led to the final design. The spacecraft bus which carries the payload is discussed and its interface with the launch vehicle system is described. Finally, the hardwares and the operations of the terrestrial segment are presented.

Enhancing Research and Practice in Early Childhood through Formative and Design Experiments

ERIC Educational Resources Information Center

Bradley, Barbara A.; Reinking, David

2011-01-01

This article describes formative and design experiments and how they can advance research and instructional practices in early childhood education. We argue that this relatively new approach to education research closes the gap between research and practice, and it addresses limitations that have been identified in early childhood research. We…

Design and performance of B4WarmED, an aboveground and belowground free-air warming experiment at the temperate-boreal forest ecotone

USDA-ARS?s Scientific Manuscript database

Conducting manipulative climate change experiments in forests is challenging, given their spatial heterogeneity and canopy complexity. One specific challenge involves warming both plants and soils to depth in ecosystems without much bare ground. We describe the design, implementation, and performanc...

The Perils of Arab American Adolescents Post 9/11

ERIC Educational Resources Information Center

Tabbah, Rhonda

2016-01-01

Purpose: This paper aims to describe patterns of experiences and perceptions of inclusion and accuracy of Arab American culture in the multicultural paradigm in schools through the voices of Arab American youth. Design/methodology/approach: This study was carried out using a survey research design. Qualitative reports of experiences in school were…

Concepts for the development of light-weight composite structures for rotor burst containment

NASA Technical Reports Server (NTRS)

Holms, A. G.

1977-01-01

Based on published results on rotor burst containment with single materials, and on body armor using composite materials, a set of hypotheses is established as to what variables might control the design of a weight-efficient protective device. Based on modern concepts for the design and analysis of small optimum seeking experiments, a particular experiment for evaluating the hypotheses and materials was designed. The design and methods for the analysis of results are described.

Titration of Alanine Monitored by NMR Spectroscopy: A Biochemistry Laboratory Experiment

ERIC Educational Resources Information Center

Waller, Francis J.; And Others

1977-01-01

The experiment described here involves simultaneous monitoring of pH and NMR chemical shifts during an aqueous titration of alpha- and beta-alanine. This experiment is designed for use in an undergraduate biochemistry course. (MR)

Ball Collision Experiments

ERIC Educational Resources Information Center

Cross, R.

2015-01-01

Experiments are described on collisions between two billiard balls and between a bat and a ball. The experiments are designed to extend a student's understanding of collision events and could be used either as a classroom demonstration or for a student project.

Development and Formative Evaluation of Computer Simulated College Chemistry Experiments.

ERIC Educational Resources Information Center

Cavin, Claudia S.; Cavin, E. D.

1978-01-01

This article describes the design, preparation, and initial evaluation of a set of computer-simulated chemistry experiments. The experiments entailed the use of an atomic emission spectroscope and a single-beam visible absorption spectrophometer. (Author/IRT)

Designing a Hybrid Laminar-Flow Control Experiment: The CFD-Experiment Connection

NASA Technical Reports Server (NTRS)

Streett, C. L.

2003-01-01

The NASA/Boeing hybrid laminar flow control (HLFC) experiment, designed during 1993-1994 and conducted in the NASA LaRC 8-foot Transonic Pressure Tunnel in 1995, utilized computational fluid dynamics and numerical simulation of complex fluid mechanics to an unprecedented extent for the design of the test article and measurement equipment. CFD was used in: the design of the test wing, which was carried from definition of desired disturbance growth characteristics, through to the final airfoil shape that would produce those growth characteristics; the design of the suction-surface perforation pattern that produced enhanced crossflow-disturbance growth: and in the design of the hot-wire traverse system that produced minimal influence on measured disturbance growth. These and other aspects of the design of the test are discussed, after the historical and technical context of the experiment is described.

Designing an Effective Prevention Program: Principles Underlying the Rand Smoking and Drug Prevention Experiment.

ERIC Educational Resources Information Center

Ellickson, Phyllis L.

This paper describes the Project ALERT program (Adolescent Learning Experiences in Resistance Training) which was established by the Rand Corporation to prevent smoking and drug use among seventh graders. The program is based on the social influence model of drug use initiation. Curriculum features are described including motivation to resist and…

Living in the Real World: So You Want to Build a Building? Dancing with Architects and Other Developmental Experiences--Part 3: Designing the Building.

ERIC Educational Resources Information Center

Greenman, Jim

1992-01-01

The process of designing a child care center is described. This process includes the conceptual and schematic design, schematic pricing, design development, and construction documents. Overall design criteria, and interior program components, are discussed. (LB)

Implementing Professional Experiences to Prepare Preservice Science Teachers

ERIC Educational Resources Information Center

Nuangchalerm, Prasart

2009-01-01

In the correlation between professional experiences of preservice science teacher and classroom managerial skills, professional experiences were designed to prepare science teacher in the future. The effects of program were described the result of implementing professional experiences of 67 preservice science teachers. Data were collected by using…

Skylab, Classroom in Space.

ERIC Educational Resources Information Center

Summerlin, Lee B., Ed.

In the Skylab student project, high school students submitted proposals for experiments that could be performed on board Skylab by the astronauts. This book describes the experiments designed by the students and reports what happened to those experiments in the space laboratory. The student experiments included studies of the central nervous…

Two Multipurpose Thermochemical Experiments for General Chemistry.

ERIC Educational Resources Information Center

Wentworth, R. A. D.

1988-01-01

Describes two experiments designed to provide concepts on the difference between heat and temperature and also bond energy. Investigates both a neutralization experiment and a ligation experiment. Notes inexpensive chemicals are used along with simple equipment. Discusses the sharing of lab results for a single class value. (MVL)

A Study in Competition

ERIC Educational Resources Information Center

Payne, Therese Anne

1973-01-01

Describes a microbiological experiment designed to study the competition between two species of bacteria. Experimental procedures and data obtained in conducting this experiment are provided, together with a discussion of the results. (JR)

Experiments in Special Relativity Using Compton Scattering of Gamma Rays.

ERIC Educational Resources Information Center

Egelstaff, P. A.; And Others

1981-01-01

Some simple undergraduate laboratory experiments are described, which verify the energy-momentum relationship of special relativity. These experiments have been designed either to be used as classroom demonstrations or to be carried out by second-year students. (Author/JN)

Oxidation of Secondary Alcohols by Duckweed: A Biotransformation Experiment for Undergraduate Students.

ERIC Educational Resources Information Center

Karfarski, Pawel; And Others

1988-01-01

Describes an experiment designed to use the ability of duckweed to convert the secondary hydroxyl moieties into ketone groups. Discusses the preparation of plant material, materials, procedures, and results for this biotransformation experiment for undergraduate students. (CW)

An experimental investigation of 235 sub UF sub 6 fission produced plasmas. [gas handling system for use with nuclear pumped laser experiments

NASA Technical Reports Server (NTRS)

Miley, G. H.

1981-01-01

A gas handling system capable of use with uranium fluoride was designed and constructed for use with nuclear pumped laser experiments using the TRIGA research reactor. By employing careful design and temperature controls, the UF6 can be first transported into the irradiation chamber, and then, at the conclusion of the experiment, returned to gas cylinders. The design of the system is described. Operating procedures for the UF6 and gas handling systems are included.

Preliminary Design Program: Vapor Compression Distillation Flight Experiment Program

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Boyda, R. B.

1995-01-01

This document provides a description of the results of a program to prepare a preliminary design of a flight experiment to demonstrate the function of a Vapor Compression Distillation (VCD) Wastewater Processor (WWP) in microgravity. This report describes the test sequence to be performed and the hardware, control/monitor instrumentation and software designs prepared to perform the defined tests. the purpose of the flight experiment is to significantly reduce the technical and programmatic risks associated with implementing a VCD-based WWP on board the International Space Station Alpha.

Experiment S-191 visible and infrared spectrometer

NASA Technical Reports Server (NTRS)

Linnell, E. R.

1974-01-01

The design, development, fabrication test, and utilization of the visible and infrared spectrometer portion of the S-191 experiment, part of the Earth Resources Experiment Package, on board Skylab is discussed. The S-191 program is described, as well as conclusions and recommendations for improvement of this type of instrument for future applications. Design requirements, instrument design approaches, and the test verification program are presented along with test results, including flight hardware calibration data. A brief discussion of operation during the Skylab mission is included. Documentation associated with the program is listed.

Design and Analysis of AN Static Aeroelastic Experiment

NASA Astrophysics Data System (ADS)

Hou, Ying-Yu; Yuan, Kai-Hua; Lv, Ji-Nan; Liu, Zi-Qiang

2016-06-01

Static aeroelastic experiments are very common in the United States and Russia. The objective of static aeroelastic experiments is to investigate deformation and loads of elastic structure in flow field. Generally speaking, prerequisite of this experiment is that the stiffness distribution of structure is known. This paper describes a method for designing experimental models, in the case where the stiffness distribution and boundary condition of a real aircraft are both uncertain. The stiffness distribution form of the structure can be calculated via finite element modeling and simulation calculation and F141 steels and rigid foam are used to make elastic model. In this paper, the design and manufacturing process of static aeroelastic models is presented and a set of experiment model was designed to simulate the stiffness of the designed wings, a set of experiments was designed to check the results. The test results show that the experimental method can effectively complete the design work of elastic model. This paper introduces the whole process of the static aeroelastic experiment, and the experimental results are analyzed. This paper developed a static aeroelasticity experiment technique and established an experiment model targeting at the swept wing of a certain kind of large aspect ratio aircraft.

The design, development, and test of balloonborne and groundbased lidar systems. Volume 2: Flight test of Atmospheric Balloon Lidar Experiment, ABLE 2

NASA Astrophysics Data System (ADS)

Shepherd, O.; Bucknam, R. D.; Hurd, A. G.; Sheehan, W. H.

1991-06-01

This is Volume 3 of a three volume final report on the design, development, and test of balloonborne and groundbased lidar systems. Volume 1 describes the design and fabrication of a balloonborne CO2 coherent payload to measure the 10.6 micrometers backscatter from atmospheric aerosols as a function of altitude. Volume 2 describes the Aug. 1987 flight test of Atmospheric Balloonborne Lidar Experiment, ABLE 2. In this volume we describe groundbased lidar development and measurements. A design was developed for installation of the ABLE lidar in the GL rooftop dome. A transportable shed was designed to house the ABLE lidar at the various remote measurement sites. Refurbishment and modification of the ABLE lidar were completed to permit groundbased lidar measurements of clouds and aerosols. Lidar field measurements were made at Ascension Island during SABLE 89. Lidar field measurements were made at Terciera, Azores during GABLE 90. These tasks were successfully completed, and recommendations for further lidar measurements and data analysis were made.

RF-based power distribution system for optogenetic experiments

NASA Astrophysics Data System (ADS)

Filipek, Tomasz A.; Kasprowicz, Grzegorz H.

2017-08-01

In this paper, the wireless power distribution system for optogenetic experiment was demonstrated. The design and the analysis of the power transfer system development is described in details. The architecture is outlined in the context of performance requirements that had to be met. We show how to design a wireless power transfer system using resonant coupling circuits which consist of a number of receivers and one transmitter covering the entire cage area with a specific power density. The transmitter design with the full automated protection stage is described with detailed consideration of the specification and the construction of the transmitting loop antenna. In addition, the design of the receiver is described, including simplification of implementation and the minimization of the impact of component tolerances on the performance of the distribution system. The conducted analysis has been confirmed by calculations and measurement results. The presented distribution system was designed to provide 100 mW power supply to each of the ten possible receivers in a limited 490 x 350 mm cage space while using a single transmitter working at the coupling resonant frequency of 27 MHz.

Development of a Superconducting Magnet System for the ONR/General Atomics Homopolar Motor

NASA Astrophysics Data System (ADS)

Schaubel, K. M.; Langhorn, A. R.; Creedon, W. P.; Johanson, N. W.; Sheynin, S.; Thome, R. J.

2006-04-01

This paper describes the design, testing and operational experience of a superconducting magnet system presently in use on the Homopolar Motor Program. The homopolar motor is presently being tested at General Atomics in San Diego, California for the U.S Navy Office of Naval Research. The magnet system consists of two identical superconducting solenoid coils housed in two cryostats mounted integrally within the homopolar motor housing. The coils provide the static magnetic field required for motor operation and are wound using NbTi superconductor in a copper matrix. Each magnet is conduction cooled using a Gifford McMahon cryocooler. The coils are in close proximity to the iron motor housing requiring a cold to warm support structure with high stiffness and strength. The design of the coils, cold to warm support structure, cryogenic system, and the overall magnet system design will be described. The test results and operational experience will also be described.

Definition of experiments and instruments for a communication/navigation research laboratory. Volume 2: Experiment selection

NASA Technical Reports Server (NTRS)

1972-01-01

The selection and definition of candidate experiments and the associated experiment instrumentation requirements are described. Information is presented that addresses the following study objectives: (1) determine specific research and technology needs in the comm/nav field through a survey of the scientific/technical community; (2) develop manned low earth orbit space screening criteria and compile lists of potential candidate experiments; (3) in Blue Book format, define and describe selected candidate experiments in sufficient detail to develop laboratory configuration designs and layouts; and (4) develop experiment time phasing criteria and recommend a payload for sortie can/early laboratory missions.

Client Experiences of Counselling and Treatment Interventions: A Qualitative Study of Family Views of Family Therapy.

ERIC Educational Resources Information Center

Howe, David

1996-01-01

Argues that personal experience and social life are inherently meaningful and that qualitative research designs can contribute to theory-building in counseling and psychotherapy. To illustrate the use of qualitative research designs and methods of analysis, a study of family members' views of family therapy is described. (RJM)

Neutron calibration sources in the Daya Bay experiment

DOE PAGES

Liu, J.; Carr, R.; Dwyer, D. A.; ...

2015-07-09

We describe the design and construction of the low rate neutron calibration sources used in the Daya Bay Reactor Anti-neutrino Experiment. Such sources are free of correlated gamma-neutron emission, which is essential in minimizing induced background in the anti-neutrino detector. Thus, the design characteristics have been validated in the Daya Bay anti-neutrino detector.

Geoscience Education Research Project: Student Benefits and Effective Design of a Course-Based Undergraduate Research Experience

ERIC Educational Resources Information Center

Kortz, Karen M.; van der Hoeven Kraft, Katrien J.

2016-01-01

Undergraduate research has been shown to be an effective practice for learning science. While this is a popular discussion topic, there are few full examples in the literature for introductory-level students. This paper describes the Geoscience Education Research Project, an innovative course-based research experience designed for…

Board Games and Board Game Design as Learning Tools for Complex Scientific Concepts: Some Experiences

ERIC Educational Resources Information Center

Chiarello, Fabio; Castellano, Maria Gabriella

2016-01-01

In this paper the authors report different experiences in the use of board games as learning tools for complex and abstract scientific concepts such as Quantum Mechanics, Relativity or nano-biotechnologies. In particular we describe "Quantum Race," designed for the introduction of Quantum Mechanical principles, "Lab on a chip,"…

Learning through Emotion: Moving the Affective in from the Margins

ERIC Educational Resources Information Center

Dunn, Julie; Stinson, Madonna

2012-01-01

In an educational environment where experiences offered to children are increasingly being shaped by testing regimes and rigid curriculum design, learning experiences can often border on the bland and the neutral, or at best, focus on positive emotions such as joy and happiness. The work which is described in this article was designed to stimulate…

The Kosmos-1129 biosatellite. [experiments in biological effects of space flight

NASA Technical Reports Server (NTRS)

Nikitin, S. A.

1980-01-01

A number of experiments, designed by participating specialists from several countries, are described. The experiments included studies in biorhythm, stress, body parts, behavior, ontogenesis, and gravitational preference. The biological subjects of the experiments were retrieved immediately after the landing of the satellite and examined in a field laboratory.

TARDIS: An Automation Framework for JPL Mission Design and Navigation

NASA Technical Reports Server (NTRS)

Roundhill, Ian M.; Kelly, Richard M.

2014-01-01

Mission Design and Navigation at the Jet Propulsion Laboratory has implemented an automation framework tool to assist in orbit determination and maneuver design analysis. This paper describes the lessons learned from previous automation tools and how they have been implemented in this tool. In addition this tool has revealed challenges in software implementation, testing, and user education. This paper describes some of these challenges and invites others to share their experiences.

Fast Pulses in a Coaxial Cable.

ERIC Educational Resources Information Center

Gray, Levi

1985-01-01

Describes an experiment designed to introduce physics majors to the triggered oscilloscope. The experiment uses an inexpensive, easily constructed generator which sends pulses down a long coaxial cable, thus providing useful waveforms. (DH)

Assay for Angiotensin-Converting Enzyme.

ERIC Educational Resources Information Center

Russo, Salvatore F.

1983-01-01

Describes a three-hour experiment designed to introduce students to chemistry of the angiotensis-converting enzyme, illustrate design of a quenched fluorescence substrate, and examine considerations necessary in designing a clinical assay. Includes background information on the biochemistry of hypertension, reagents/materials needed, procedures…

A Simulated Stream Ecology Study.

ERIC Educational Resources Information Center

Zampella, Robert A.

1979-01-01

Describes a simulated field experience to study stream ecology in the classroom. Secondary students determine the composition of the stream community, describe the distribution of the benthic invertebrates, and design a food web. (Author/MA)

Telerobotic Tending of Space Based Plant Growth Chamber

NASA Technical Reports Server (NTRS)

Backes, P. G.; Long, M. K.; Das, H.

1994-01-01

The kinematic design of a telerobotic mechanism for tending a plant growth space science experiment chamber is described. Ground based control of tending mechanisms internal to space science experiments will allow ground based principal investigators to interact directly with their space science experiments.

Tank Pressure Control Experiment (TPCE)

NASA Technical Reports Server (NTRS)

Bentz, Mike

1992-01-01

The Tank Pressure Control Experiment (TPCE) is a small self-contained STS payload designed to test a jet mixer for cryogenic fluid pressure control. Viewgraphs are presented that describe project organization, experiment objectives and approach, risk management, payload concept and mission plan, and initial test data.

A Membrane Gas Separation Experiment for the Undergraduate Laboratory.

ERIC Educational Resources Information Center

Davis, Richard A.; Sandall, Orville C.

1991-01-01

Described is a membrane experiment that provides students with experience in fundamental engineering skills such as mass balances, modeling, and using the computer as a research tool. Included are the experimental design, theory, method of solution, sample calculations, and conclusions. (KR)

Modular space station phase B extension preliminary system design. Volume 3: Experiment analyses

NASA Technical Reports Server (NTRS)

Wengrow, G. L.; Lillenas, A. N.

1972-01-01

Experiment analysis tasks performed during program definition study are described. Experiment accommodation and scheduling, and defining and implementing the laboratory evolution are discussed. The general purpose laboratory requirements and concepts are defined, and supplemental studies are reported.

The electron Echo 6 mechanical deployment systems

NASA Technical Reports Server (NTRS)

Meyers, S. C.; Steffen, J. E.; Malcolm, P. R.; Winckler, J. R.

1984-01-01

The Echo 6 sounding rocket payload was flown on a Terrier boosted Black Brant vehicle on March 30, 1983. The experiment requirements resulted in the new design of a rocket propelled Throw Away Detector System (TADS) with onboard Doppler radar, a free-flyer forward experiment designated the Plasma Diagnostic Package (PDP), and numerous other basic systems. The design, developmental testing, and flight preparations of the payload and the mechanical deployment systems are described.

Systems report for payload G-652: Project origins

NASA Technical Reports Server (NTRS)

Bellina, J.; Muckerheide, M. C.; Clark, J.; Petry, M.; Seeley, D.; Sportiello, R.; Sprecher, R.; Theiler, M.

1988-01-01

Experiments conducted to investigate possible hardware configurations and methodologies for a Get Away Special payload designated G-652 are discussed. Test data collected from the operation of a free electron laser wiggler using simulated ram glow phenomenon are described. Results of an experiment to synthesize organic compounds within a primordial atmosphere using a laser induced plasma are discussed. An experiment is described which utilized neutron bombardment to assess the risk of genetic alterations in embyros in space.

A Charles' Law Experiment for Beginning Students.

ERIC Educational Resources Information Center

Rockley, Mark G.; Rockley, Natalie L.

1995-01-01

Describes an experiment designed to measure absolute zero using Charles' Law without the use of mercury. Provides the procedure and details of the apparatus and includes experimental results obtained using the apparatus. (DDR)

Principles of Precision Spectrophotometry: An Advanced Undergraduate Experiment

ERIC Educational Resources Information Center

Billmeyer, Fred W., Jr.

1974-01-01

Describes an experiment designed to familiarize students with the operation of a precision spectrophotometer, the effects of changes in operating variables, and the characteristics of such components as sources and detectors. (SLH)

Rockets Away!

ERIC Educational Resources Information Center

Kaahaaina, Nancy

1997-01-01

Describes a project that involved a rocket-design competition where students played the roles of McDonnell Douglas employees competing for NASA contracts. Provides a real world experience involving deadlines, design and performance specifications, and budgets. (JRH)

Field research on the spectral properties of crops and soils, volume 1. [Purdue Agronomy Farm

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator); Biehl, L. L.; Robinson, B. F.

1980-01-01

The experiment design, data acquisition and preprocessing, data base management, analysis results and development of instrumentation for the AgRISTARS Supporting Research Project, Field Research task are described. Results of several investigations on the spectral reflectance of corn and soybean canopies as influenced by cultural practices, development stage and nitrogen nutrition are reported as well as results of analyses of the spectral properties of crop canopies as a function of canopy geometry, row orientation, sensor view angle and solar illumination angle are presented. The objectives, experiment designs and data acquired in 1980 for field research experiments are described. The development and performance characteristics of a prototype multiband radiometer, data logger, and aerial tower for field research are discussed.

Apollo experience report: Lunar module environmental control subsystem

NASA Technical Reports Server (NTRS)

Gillen, R. J.; Brady, J. C.; Collier, F.

1972-01-01

A functional description of the environmental control subsystem is presented. Development, tests, checkout, and flight experiences of the subsystem are discussed; and the design fabrication, and operational difficulties associated with the various components and subassemblies are recorded. Detailed information is related concerning design changes made to, and problems encountered with, the various elements of the subsystem, such as the thermal control water sublimator, the carbon dioxide sensing and control units, and the water section. The problems associated with water sterilization, water/glycol formulation, and materials compatibility are discussed. The corrective actions taken are described with the expection that this information may be of value for future subsystems. Although the main experiences described are problem oriented, the subsystem has generally performed satisfactorily in flight.

Supplement to the 1975 report on active and planned spacecraft and experiments

NASA Technical Reports Server (NTRS)

Horowitz, R. (Editor); Davis, L. R. (Editor)

1975-01-01

A listing and brief description of spacecraft and experiments designed to update the January 1975 report on active and planned spacecraft and experiments to March 31, 1975 was presented. The information is given in two sections. In the first, spacecraft and experiments that have become known to NSSDC since the original report or that have changed significantly are described. In the second, an alphabetical listing is given for all spacecraft and experiments described in the first section and in the original report. It also updates status of operation and launch dates to March 31, 1975.

Ground station hardware for the ATS-F millimeter wave experiment

NASA Technical Reports Server (NTRS)

Duffield, T. L.

1973-01-01

The results are presented of a program to design, fabricate, test, and install a primary ATS-F millimeter wave ground receiving station. Propagation parameters at millimeter waves are discussed along with the objective of the overall experiment. A general description is given of the receiving system and its function in the experiment. Typical receiver characteristics are presented which show that the experiment is entirely feasible from a link SNR standpoint. The receiving system hardware designs are discussed with separate treatment given to the propagation and the radiometer receiver designs. The modification and relocation are described of an existing 15-ft antenna to meet the ATS-F requirements. The design of a dual frequency feed subsystem and self calibration equipment is included.

Discrete choice experiments of pharmacy services: a systematic review.

PubMed

Vass, Caroline; Gray, Ewan; Payne, Katherine

2016-06-01

Background Two previous systematic reviews have summarised the application of discrete choice experiments to value preferences for pharmacy services. These reviews identified a total of twelve studies and described how discrete choice experiments have been used to value pharmacy services but did not describe or discuss the application of methods used in the design or analysis. Aims (1) To update the most recent systematic review and critically appraise current discrete choice experiments of pharmacy services in line with published reporting criteria and; (2) To provide an overview of key methodological developments in the design and analysis of discrete choice experiments. Methods The review used a comprehensive strategy to identify eligible studies (published between 1990 and 2015) by searching electronic databases for key terms related to discrete choice and best-worst scaling (BWS) experiments. All healthcare choice experiments were then hand-searched for key terms relating to pharmacy. Data were extracted using a published checklist. Results A total of 17 discrete choice experiments eliciting preferences for pharmacy services were identified for inclusion in the review. No BWS studies were identified. The studies elicited preferences from a variety of populations (pharmacists, patients, students) for a range of pharmacy services. Most studies were from a United Kingdom setting, although examples from Europe, Australia and North America were also identified. Discrete choice experiments for pharmacy services tended to include more attributes than non-pharmacy choice experiments. Few studies reported the use of qualitative research methods in the design and interpretation of the experiments (n = 9) or use of new methods of analysis to identify and quantify preference and scale heterogeneity (n = 4). No studies reported the use of Bayesian methods in their experimental design. Conclusion Incorporating more sophisticated methods in the design of pharmacy-related discrete choice experiments could help researchers produce more efficient experiments which are better suited to valuing complex pharmacy services. Pharmacy-related discrete choice experiments could also benefit from more sophisticated analytical techniques such as investigations into scale and preference heterogeneity. Employing these sophisticated methods for both design and analysis could extend the usefulness of discrete choice experiments to inform health and pharmacy policy.

Identifying Instructional Strategies Used to Design Mobile Learning in a Corporate Setting

ERIC Educational Resources Information Center

Jackson-Butler, Uletta

2016-01-01

The purpose of this qualitative embedded multiple case study was to describe what instructional strategies corporate instructional designers were using to design mobile learning and to understand from their experiences which instructional strategies they believed enhance learning. Participants were five instructional designers who were actively…

Computer Simulation of Human Service Program Evaluations.

ERIC Educational Resources Information Center

Trochim, William M. K.; Davis, James E.

1985-01-01

Describes uses of computer simulations for the context of human service program evaluation. Presents simple mathematical models for most commonly used human service outcome evaluation designs (pretest-posttest randomized experiment, pretest-posttest nonequivalent groups design, and regression-discontinuity design). Translates models into single…

Photolysis of 4-Phenyl-1,3-dioxolan-2-one: An Undergraduate Experiment in Free Radical Chemistry.

ERIC Educational Resources Information Center

White, Rick C.; Ma, Sha

1988-01-01

Describes a photochemistry experiment designed to introduce photochemical techniques and experience free radical chemistry. Selects Nuclear Magnetic Resonance spectroscopy for the analysis. This activity is suggested for use in an upper level undergraduate organic course. (MVL)

Particle Collection - Skylab Experiment S149

NASA Technical Reports Server (NTRS)

1970-01-01

This chart describes Skylab's Particle Collection device, a scientific experiment designed to study micro-meteoroid particles in near-Earth space and determine their abundance, mass distribution, composition, and erosive effects. The Marshall Space Flight Center had program management responsibility for the development of Skylab hardware and experiments.

Does Copper Metal React with Acetic Acid?

ERIC Educational Resources Information Center

DeMeo, Stephen

1997-01-01

Describes an activity that promotes analytical thinking and problem solving. Gives students experience with important scientific processes that can be generalized to other new laboratory experiences. Provides students with the opportunity to hypothesize answers, control variables by designing an experiment, and make logical deductions based on…

Gravity and Antimatter.

ERIC Educational Resources Information Center

Goldman, Terry; And Others

1988-01-01

Discusses the theory and history behind an experiment that will be performed to measure the gravitational forces that effect antimatter. Describes conditions under which the principle of equivalence would be violated or supported. Reviews historical tests of equivalence, current theory and experiments. Presents the design of the new experiment.…

Preparing Children for Stressful Experiences.

ERIC Educational Resources Information Center

Krueger, Ruth

Based on the author's experiences with severely disturbed preschool children, the paper focuses on the importance of classroom preparation in helping children cope with both routine and unusual stressful experiences. Briefly described is the Child Study Center program for severely disturbed children designed to develop a corrective relationship…

Learning from the Implementers in a Design Experiment

ERIC Educational Resources Information Center

Toh, Tin Lam; Dindyal, Jaguthsing; Tay, Eng Guan

2013-01-01

In a design experiment, the feedback from the teacher-implementer is crucial to the success of the innovation simply because the teacher is finally the one that brings the innovation to life in front of the students. We describe in this paper the feedback made by the teacher-implementer after teaching one cycle of the problem solving module in a…

Apollo experience report: Crew station integration. Volume 2: Crew station displays and controls

NASA Technical Reports Server (NTRS)

Langdoc, W. A.; Nassman, D. A.

1975-01-01

The functional requirements for the Apollo displays and controls system are presented. The configuration of the displays, controls, and panels for both the command module and the lunar module are described, and the design development and operational experience of the displays and controls system are discussed. Pertinent recommendations for future displays and controls system design efforts are made.

From theory to experimental design-Quantifying a trait-based theory of predator-prey dynamics.

PubMed

Laubmeier, A N; Wootton, Kate; Banks, J E; Bommarco, Riccardo; Curtsdotter, Alva; Jonsson, Tomas; Roslin, Tomas; Banks, H T

2018-01-01

Successfully applying theoretical models to natural communities and predicting ecosystem behavior under changing conditions is the backbone of predictive ecology. However, the experiments required to test these models are dictated by practical constraints, and models are often opportunistically validated against data for which they were never intended. Alternatively, we can inform and improve experimental design by an in-depth pre-experimental analysis of the model, generating experiments better targeted at testing the validity of a theory. Here, we describe this process for a specific experiment. Starting from food web ecological theory, we formulate a model and design an experiment to optimally test the validity of the theory, supplementing traditional design considerations with model analysis. The experiment itself will be run and described in a separate paper. The theory we test is that trophic population dynamics are dictated by species traits, and we study this in a community of terrestrial arthropods. We depart from the Allometric Trophic Network (ATN) model and hypothesize that including habitat use, in addition to body mass, is necessary to better model trophic interactions. We therefore formulate new terms which account for micro-habitat use as well as intra- and interspecific interference in the ATN model. We design an experiment and an effective sampling regime to test this model and the underlying assumptions about the traits dominating trophic interactions. We arrive at a detailed sampling protocol to maximize information content in the empirical data obtained from the experiment and, relying on theoretical analysis of the proposed model, explore potential shortcomings of our design. Consequently, since this is a "pre-experimental" exercise aimed at improving the links between hypothesis formulation, model construction, experimental design and data collection, we hasten to publish our findings before analyzing data from the actual experiment, thus setting the stage for strong inference.

Enhanced Attitude Control Experiment for SSTI Lewis Spacecraft

NASA Technical Reports Server (NTRS)

Maghami, Peoman G.

1997-01-01

The enhanced attitude control system experiment is a technology demonstration experiment on the NASA's small spacecraft technology initiative program's Lewis spacecraft to evaluate advanced attitude control strategies. The purpose of the enhanced attitude control system experiment is to evaluate the feasibility of designing and implementing robust multi-input/multi-output attitude control strategies for enhanced pointing performance of spacecraft to improve the quality of the measurements of the science instruments. Different control design strategies based on modern and robust control theories are being considered for the enhanced attitude control system experiment. This paper describes the experiment as well as the design and synthesis of a mixed H(sub 2)/H(sub infinity) controller for attitude control. The control synthesis uses a nonlinear programming technique to tune the controller parameters and impose robustness and performance constraints. Simulations are carried out to demonstrate the feasibility of the proposed attitude control design strategy. Introduction

Biomedical experiments. Part A: Biostack experiment

NASA Technical Reports Server (NTRS)

Buecker, H.; Horneck, G.; Reinholz, E.; Scheuermann, W.; Ruether, W.; Graul, E. H.; Planel, H.; Soleilhavoup, J. P.; Cuer, P.; Kaiser, R.

1972-01-01

The biostack experiment is described which was designed to study the biologic effects of individual heavy nuclei of galactic cosmic radiation during space flight outside the magnetosphere of the earth. Specifically, the biostack experiment was designed to promote research on the effects of high energy/high Z particles of galactic cosmic radiation on a broad spectrum of biologic systems, from the molecular to the highly organized and developed forms of life. The experiment was considered unique and scientifically meritorious because of its potential yield of information - currently unavailable on earth - on the interaction of biologic systems with the heavy particles of galactic cosmic radiation.

Apollo-Soyuz pamphlet no. 4: Gravitational field. [experimental design

NASA Technical Reports Server (NTRS)

Page, L. W.; From, T. P.

1977-01-01

Two Apollo Soyuz experiments designed to detect gravity anomalies from spacecraft motion are described. The geodynamics experiment (MA-128) measured large-scale gravity anomalies by detecting small accelerations of Apollo in the 222 km orbit, using Doppler tracking from the ATS-6 satellite. Experiment MA-089 measured 300 km anomalies on the earth's surface by detecting minute changes in the separation between Apollo and the docking module. Topics discussed in relation to these experiments include the Doppler effect, gravimeters, and the discovery of mascons on the moon.

Design of a clinical notification system.

PubMed

Wagner, M M; Tsui, F C; Pike, J; Pike, L

1999-01-01

We describe the requirements and design of an enterprise-wide notification system. From published descriptions of notification schemes, our own experience, and use cases provided by diverse users in our institution, we developed a set of functional requirements. The resulting design supports multiple communication channels, third party mappings (algorithms) from message to recipient and/or channel of delivery, and escalation algorithms. A requirement for multiple message formats is addressed by a document specification. We implemented this system in Java as a CORBA object. This paper describes the design and current implementation of our notification system.

Optimizing ELISAs for precision and robustness using laboratory automation and statistical design of experiments.

PubMed

Joelsson, Daniel; Moravec, Phil; Troutman, Matthew; Pigeon, Joseph; DePhillips, Pete

2008-08-20

Transferring manual ELISAs to automated platforms requires optimizing the assays for each particular robotic platform. These optimization experiments are often time consuming and difficult to perform using a traditional one-factor-at-a-time strategy. In this manuscript we describe the development of an automated process using statistical design of experiments (DOE) to quickly optimize immunoassays for precision and robustness on the Tecan EVO liquid handler. By using fractional factorials and a split-plot design, five incubation time variables and four reagent concentration variables can be optimized in a short period of time.

CUORE-0 detector: design, construction and operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alduino, C.; Alfonso, K.; Artusa, D. R.

The CUORE experiment will search for neutrinoless double-beta decay of 130Te with an array of 988 TeO 2 bolometers arranged in 19 towers. CUORE-0, the first tower assembled according to the CUORE procedures, was built and commissioned at Laboratori Nazionali del Gran Sasso, and took data from March 2013 to March 2015. In this study we describe the design, construction and operation of the CUORE-0 experiment, with an emphasis on the improvements made over a predecessor experiment, Cuoricino. Finally, in particular, we demonstrate with CUORE-0 data that the design goals of CUORE are within reach.

CUORE-0 detector: design, construction and operation

DOE PAGES

Alduino, C.; Alfonso, K.; Artusa, D. R.; ...

2016-07-12

The CUORE experiment will search for neutrinoless double-beta decay of 130Te with an array of 988 TeO 2 bolometers arranged in 19 towers. CUORE-0, the first tower assembled according to the CUORE procedures, was built and commissioned at Laboratori Nazionali del Gran Sasso, and took data from March 2013 to March 2015. In this study we describe the design, construction and operation of the CUORE-0 experiment, with an emphasis on the improvements made over a predecessor experiment, Cuoricino. Finally, in particular, we demonstrate with CUORE-0 data that the design goals of CUORE are within reach.

Design Recommendations for Concrete Tunnel Linings : Volume I. Results of Model Tests and Analytical Parameter Studies.

DOT National Transportation Integrated Search

1983-11-01

Volume 1 of this report describes model tests and analytical studies based on experience, interviews with design engineers, and literature reviews, carried out to develop design recommendations for concrete tunnel linings. Volume 2 contains the propo...

High-power S-band experiment study: Objectives, description, planning and operation of experiment for ATS-G spacecraft

NASA Technical Reports Server (NTRS)

Walp, R. M.

1972-01-01

The results of a study to develop and define requirements for the high power S-band experiment for the ATS-G are summarized. The objectives of the experiment are: (1) to demonstrate high power technology at S-band frequencies in orbiting spacecraft, (2) to employ high power carrier from the spacecraft for conducting interference measurements with Instructional Television Fixed Service systems, and (3) to provide means for performing educationally oriented applications experiments. Experiment organization and operation, and hardware for flight on the ATS-G spacecraft are described. Earth stations designed for the experiment as well as other special ground equipment are also described.

Experiments with Cholesteric Liquid Crystals

ERIC Educational Resources Information Center

Fergason, James L.

1970-01-01

Describes laboratory experiments designed to demonstrate (1) the properties of cholesteric liquid crystals, (2) thermal mapping, (3) thermal diffusivity, (4) adiabatic expansion of rubber, and (5) measurement of radiated energy by a point source. Contains all of the information on materials and apparatus needed to perform the experiments.…

Apollo-Soyuz test project. Volume 1: Astronomy, earth atmosphere and gravity field, life sciences, and materials processing

NASA Technical Reports Server (NTRS)

1977-01-01

The joint U.S.-USSR experiments and the U.S. conducted unilateral experiments performed during the Apollo Soyuz Test Project are described. Scientific concepts and experiment design and operation are discussed along with scientific results of postflight analysis.

Microcomputer-Based Digital Signal Processing Laboratory Experiments.

ERIC Educational Resources Information Center

Tinari, Jr., Rocco; Rao, S. Sathyanarayan

1985-01-01

Describes a system (Apple II microcomputer interfaced to flexible, custom-designed digital hardware) which can provide: (1) Fast Fourier Transform (FFT) computation on real-time data with a video display of spectrum; (2) frequency synthesis experiments using the inverse FFT; and (3) real-time digital filtering experiments. (JN)

Spectroelectrochemical Sensing of Aqueous Iron: An Experiment for Analytical Chemistry

ERIC Educational Resources Information Center

Shtoyko, Tanya; Stuart, Dean; Gray, H. Neil

2007-01-01

We have designed a laboratory experiment to illustrate the use of spectroelectrochemical techniques for determination of aqueous iron. The experiment described in this article is applicable to an undergraduate laboratory course in analytical chemistry. Students are asked to fabricate spectroelectrochemical sensors, make electrochemical and optical…

An Environmental Experience. Man: Steward of His Environment.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

Environmental awareness experiences described in this guide are designed to serve as models or suggestions for teachers conducting activities directed toward environmental improvement. "Man: Steward of His Environment" is the theme of the 14 experiences utilizing behavior profiles, audio-visual exhibits, area studies, service projects, mass…

Celebrating 100 Years of Flight: Testing Wing Designs in Aircraft

ERIC Educational Resources Information Center

Pugalee, David K.; Nusinov, Chuck; Giersch, Chris; Royster, David; Pinelli, Thomas E.

2005-01-01

This article describes an investigation involving several designs of airplane wings in trial flight simulations based on a NASA CONNECT program. Students' experiences with data collection and interpretation are highlighted. (Contains 5 figures.)

Reinventing the Wheel: Design and Problem Solving

ERIC Educational Resources Information Center

Blasetti, Sean M.

2010-01-01

This article describes a design problem that not only takes students through the technological design process, but it also provides them with real-world problem-solving experience as it relates to the manufacturing and engineering fields. It begins with a scenario placing the student as a custom wheel designer for an automotive manufacturing…

Designing and Conducting Strong Quasi-Experiments in Education. Version 2

ERIC Educational Resources Information Center

Scher, Lauren; Kisker, Ellen; Dynarski, Mark

2015-01-01

The purpose of this paper is to describe best practices in designing and implementing strong quasi-experimental designs (QED) when assessing the effectiveness of policies, programs or practices. The paper first discusses the issues researchers face when choosing to conduct a QED, as opposed to a more rigorous randomized controlled trial design.…

Collaborative Course Design: Changing the Process, Acknowledging the Context, and Implications for Academic Development

ERIC Educational Resources Information Center

Ziegenfuss, Donna Harp; Lawler, Patricia A.

2008-01-01

This research study describes the experiences and perceptions of an instructor and an instructional design specialist who collaborated on the design and implementation of a university course using a new course design process. Findings uncovered differences between an informal collaboration process and the adaptation of that process for…

Design and development status of ETS-7, an RVD and space robot experiment satellite

NASA Technical Reports Server (NTRS)

Oda, M.; Inagaki, T.; Nishida, M.; Kibe, K.; Yamagata, F.

1994-01-01

ETS-7 (Engineering Test Satellite #7) is an experimental satellite for the in-orbit experiment of the Rendezvous Docking (RVD) and the space robot (RBT) technologies. ETS-7 is a set of two satellites, a chaser satellite and a target satellite. Both satellites will be launched together by NASDA's H-2 rocket into a low earth orbit. Development of ETS-7 started in 1990. Basic design and EM (Engineering Model) development are in progress now in 1994. The satellite will be launched in mid 1997 and the above in-orbit experiments will be conducted for 1.5 years. Design of ETS-7 RBT experiment system and development status are described in this paper.

Quasi-experimental study designs series-paper 7: assessing the assumptions.

PubMed

Bärnighausen, Till; Oldenburg, Catherine; Tugwell, Peter; Bommer, Christian; Ebert, Cara; Barreto, Mauricio; Djimeu, Eric; Haber, Noah; Waddington, Hugh; Rockers, Peter; Sianesi, Barbara; Bor, Jacob; Fink, Günther; Valentine, Jeffrey; Tanner, Jeffrey; Stanley, Tom; Sierra, Eduardo; Tchetgen, Eric Tchetgen; Atun, Rifat; Vollmer, Sebastian

2017-09-01

Quasi-experimental designs are gaining popularity in epidemiology and health systems research-in particular for the evaluation of health care practice, programs, and policy-because they allow strong causal inferences without randomized controlled experiments. We describe the concepts underlying five important quasi-experimental designs: Instrumental Variables, Regression Discontinuity, Interrupted Time Series, Fixed Effects, and Difference-in-Differences designs. We illustrate each of the designs with an example from health research. We then describe the assumptions required for each of the designs to ensure valid causal inference and discuss the tests available to examine the assumptions. Copyright © 2017 Elsevier Inc. All rights reserved.

"Dans le sillon des voyageurs": Thunder Bay's Experiment in French Community Television

ERIC Educational Resources Information Center

Lewis, David W. P.

1976-01-01

Thunder Bay French Television was begun as an experiment in amateur community television designed to appeal to francophones, elementary school pupils, students, and the public at large. Organization and programming are described. (RM)

Cyclic Voltammetry Experiment.

ERIC Educational Resources Information Center

Van Benschoten, James J.; And Others

1983-01-01

Describes a three-part experiment designed to introduce cyclic voltammetry to graduate/undergraduate students. Part 1 demonstrates formal reduction potential, redox electron transfer, diffusion coefficient, and electrochemical reversibility. Part 2 investigates electrochemical behavior of acetaminophen. Part 3 examines such experimental variables…

RFID Student Educational Experiences at the UNT College of Engineering: A Sequential Approach to Creating a Project-Based RFID Course

ERIC Educational Resources Information Center

Vaidyanathan, V. V.; Varanasi, M. R.; Kougianos, E.; Wang, Shuping; Raman, H.

2009-01-01

This paper describes radio frequency identification (RFID) projects, designed and implemented by students in the College of Engineering at the University of North Texas, as part of their senior-design project requirement. The paper also describes an RFID-based project implemented at Rice Middle School in Plano, TX, which went on to win multiple…

Developing future plant experiments for spaceflight

NASA Technical Reports Server (NTRS)

Dreschel, T. W.; Brown, C. S.; Hinkle, C. R.; Sager, J. C.; Knott, W. M.

1990-01-01

Experiments are described which were designed to support the constructing and using clinostats for studies of microgravity effects and for measuring photosynthesis and respiration in plants in clinostat experiments. Particular attention is given to the development and testing a clinostat for rotating the Space Shuttle Mid-Deck Locker Plant Growth Unit (PGU), a sealed chamber for plan growth and gas exchange measurements on a clinostat, and a porous tube plant nutrient delivery system for the PGU. Design diagrams of these items are presented together with the results of tests.

Exobiology research on Space Station Freedom

NASA Technical Reports Server (NTRS)

Huntington, J. L.; Stratton, D. M.; Scattergood, T. W.

1995-01-01

The Gas-Grain Simulation Facility (GGSF) is a multidisciplinary experiment laboratory being developed by NASA at Ames Research Center for delivery to Space Station Freedom in 1998. This facility will employ the low-gravity environment of the Space Station to enable aerosol experiments of much longer duration than is possible in any ground-based laboratory. Studies of fractal aggregates that are impossible to sustain on Earth will also be enabled. Three research areas within exobiology that will benefit from the GGSF are described here. An analysis of the needs of this research and of other suggested experiments has produced a list of science requirements which the facility design must accommodate. A GGSF design concept developed in the first stage of flight hardware development to meet these requirements is also described.

HOT WATER DRILL FOR TEMPERATE ICE.

USGS Publications Warehouse

Taylor, Philip L.

1984-01-01

The development of a high-pressure hot-water drill is described, which has been used reliably in temperate ice to depths of 400 meters with an average drill rate of about 1. 5 meters per minute. One arrangement of the equipment weighs about 500 kilograms, and can be contained on two sleds, each about 3 meters long. Simplified performance equations are given, and experiments with nozzle design suggest a characteristic number describing the efficiency of each design, and a minimum bore-hole diameter very close to 6 centimeters for a hot water drill. Also discussed is field experience with cold weather, water supply, and contact with englacial cavities and the glacier bed.

Laser diode initiated detonators for space applications

NASA Technical Reports Server (NTRS)

Ewick, David W.; Graham, J. A.; Hawley, J. D.

1993-01-01

Ensign Bickford Aerospace Company (EBAC) has over ten years of experience in the design and development of laser ordnance systems. Recent efforts have focused on the development of laser diode ordnance systems for space applications. Because the laser initiated detonators contain only insensitive secondary explosives, a high degree of system safety is achieved. Typical performance characteristics of a laser diode initiated detonator are described in this paper, including all-fire level, function time, and output. A finite difference model used at EBAC to predict detonator performance, is described and calculated results are compared to experimental data. Finally, the use of statistically designed experiments to evaluate performance of laser initiated detonators is discussed.

ENGINEERING DESIGN CRITERIA FOR SUB-SLAB DEPRESSURIZATION SYSTEMS IN LOW-PERMEABILTY SOLIDS

EPA Science Inventory

The report describes the development of engineering design criteria for the successful design, installation, and operation of sub-slab depressurization systems, based on radon (Rn) mitigation experience on 14 slab-on-grade houses in South Central Florida. The Florida houses are c...

Concepts for the development of light-weight composite structures for rotor burst containment

NASA Technical Reports Server (NTRS)

Holmes, A. G.

1977-01-01

A set of hypotheses is established as to what variables might control the design of a weight-efficient protective device. A particular experiment for evaluating the hypotheses and materials was designed. The design and methods for the analysis of results are described.

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

PubMed Central

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

A planar reacting shear layer system for the study of fluid dynamics-combustion interaction

NASA Technical Reports Server (NTRS)

Marek, C. J.; Chang, C. T.; Ghorashi, B.; Wey, C. C.; Wey, C.; Mularz, E. J.

1989-01-01

A versatile planar reacting shear layer facility is constructed at NASA-Lewis. The research objectives, as well as design, instrumentations and the operational procedures developed for the system are described. The fundamental governing equations and the type of quantitative information that are needed from experiments are described. Additionally, a review of earlier work is presented. Whenever appropriate, comparisons are made with similar systems in other facilities and the main differences are described. Finally, the nonintrusive measurement techniques (PLIF, PMS, LDV, and Schlieren photography) and the type of experiments that are planned are described.

An Undergraduate Experiment in Alarm System Design.

ERIC Educational Resources Information Center

Martini, R. A.; And Others

1988-01-01

Describes an experiment involving data acquisition by a computer, digital signal transmission from the computer to a digital logic circuit and signal interpretation by this circuit. The system is being used at the Illinois Institute of Technology. Discusses the fundamental concepts involved. Demonstrates the alarm experiment as it is used in…

Vertical laser beam propagation through the troposphere

NASA Technical Reports Server (NTRS)

Minott, P. O.; Bufton, J. L.; Schaefer, W. H.; Grolemund, D. A.

1974-01-01

The characteristics of the earth's atmosphere and its effects upon laser beams was investigated in a series of balloon borne, optical propagation experiments. These experiments were designed to simulate the space to ground laser link. An experiment to determine the amplitude fluctuation, commonly called scintillation, caused by the atmosphere was described.

Measuring Experiences of Interest-Related Pursuits in Connected Learning

ERIC Educational Resources Information Center

Maul, Andrew; Penuel, William R.; Dadey, Nathan; Gallagher, Lawrence P.; Podkul, Timothy; Price, Emily

2017-01-01

This paper describes an effort to develop a survey instrument capable of measuring important aspects of adolescents' experiences of interest-related pursuits that are supported by technology. The measure focuses on youths' experiences of "connected learning" (Ito et al. in Connected learning: an agenda for research and design. Digital…

A Survey of Student Experiences, Spring, 1973.

ERIC Educational Resources Information Center

Litwin, James L.

The Modular Achievement Program (MAP) at Bowling Green State University was designed to offer students an alternative experience for the freshman year. The experience would include small classes, a student-oriented staff, career workshops and an innovative curriculum. This document describes and reports the findings of a survey of student…

Bridging Media with the Help of Players

NASA Astrophysics Data System (ADS)

Nitsche, Michael; Drake, Matthew; Murray, Janet

We suggest harvesting the power of multiplayer design to bridge content across different media platforms and develop player-driven cross-media experiences. This paper first argues to partially replace complex AI systems with multiplayer design strategies to provide the necessary level of flexibility in the content generation for cross-media applications. The second part describes one example project - the Next Generation Play (NGP) project - that illustrates one practical approach of such a player-driven cross-media content generation. NGP allows players to collect virtual items while watching a TV show. These items are re-used in a multiplayer casual game that automatically generates new game worlds based on the various collections of active players joining a game session. While the TV experience is designed for the single big screen, the game executes on multiple mobile phones. Design and technical implementation of the prototype are explained in more detail to clarify how players carry elements of television narratives into a non-linear handheld gaming experience. The system describes a practical way to create casual game adaptations based on players' personal preferences in a multi-user environment.

Shoot for the Moon! the Mentors and the Middle Schoolers Explore the Intersection of Design Thinking and STEM

ERIC Educational Resources Information Center

Carroll, Maureen P.

2014-01-01

This paper describes the journey of a group of university students as they worked with underserved middle school students as mentors in a STEM-based afterschool program. Design thinking provided a frame within which students learned how to be mentors, how to create user-centered learning experiences, and how to share their experiences as…

The problem of site variation within red pine provenance experiments

Treesearch

Mark J. Holst

1966-01-01

In spite of care taken in the selection of site and experimental design of provenance experiments, site heterogenity within the experimental area may be more complex than was anticipated when the experiment was established. The present paper describes a problem of this nature encountered in a red pine (Pinus resinosa Ait.) provenance experiment at...

An overview of the Daya Bay reactor neutrino experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cao, Jun; Luk, Kam-Biu

2016-04-26

The Daya Bay Reactor Neutrino Experiment discovered an unexpectedly large neutrino oscillation related to the mixing angle θ 13 in 2012. This finding paved the way to the next generation of neutrino oscillation experiments. In this article, we review the history, featured design, and scientific results of Daya Bay. Prospects of the experiment are also described.

Lay out, test verification and in orbit performance of HELIOS a temperature control system

NASA Technical Reports Server (NTRS)

Brungs, W.

1975-01-01

HELIOS temperature control system is described. The main design features and the impact of interactions between experiment, spacecraft system, and temperature control system requirements on the design are discussed. The major limitations of the thermal design regarding a closer sun approach are given and related to test experience and performance data obtained in orbit. Finally the validity of the test results achieved with prototype and flight spacecraft is evaluated by comparison between test data, orbit temperature predictions and flight data.

Ethnic Dance. The Origins of Jazz. A Curriculum Design for Dance.

ERIC Educational Resources Information Center

Hubbard, Karen W.

1988-01-01

The article describes the development, organization, goals, and activities of a course designed to trace the evolution of jazz dance and tie this dynamic dance form to the cultural experiences of African-Americans. (CB)

Design and operating experience on the U.S. Department of Energy Experimental Mod-O 100 kW Wind Turbine

NASA Technical Reports Server (NTRS)

Glasgow, J. C.; Birchenough, A. G.

1978-01-01

The Mod-O 100 kW Experimental Wind Turbine was designed and fabricated by NASA, as part of the Federal Wind Energy Program, to assess technology requirements and engineering problems of large wind turbines. The machine became operational in October 1975 and has demonstrated successful operation in all of its design modes. During the course of its operations the machine has generated a wealth of experimental data and has served as a prototype developmental test bed for the Mod-OA operational wind turbines which are currently used on utility networks. This paper describes the mechanical and control systems as they evolved in operational tests and describes some of the experience with various systems in the downwind rotor configuration.

Fluids and Combustion Facility-Combustion Integrated Rack

NASA Technical Reports Server (NTRS)

Francisco, David R.

1998-01-01

This paper describes in detail the concept of performing Combustion microgravity experiments in the Combustion Integrated Rack (CIR) of the Fluids and Combustion Facility (FCF) on the International Space Station (ISS). The extended duration microgravity environment of the ISS will enable microgravity research to enter into a new era of increased scientific and technological data return. The FCF is designed to increase the amount and quality of scientific and technological data and decrease the development cost of an individual experiment relative to the era of Space Shuttle experiments. This paper also describes how the FCF will cost effectively accommodate these experiments.

Experience with 850-MW fossil-fired units in peaking service

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixon, B.G.

1978-01-01

Experience with the peaking operation of two 850-MW gross generation units at the Martins Creek Steam Electric Station in Pennsylvania is described. The design, operation, and performance of these oil-fueled units are discussed. (LCL)

Design Considerations for IAP Charts Approach Course Track and Communication Frequencies

DOT National Transportation Integrated Search

1991-08-01

This report describes two experiments evaluating format changes on instrument approach : plates (IAPs). The study used a simple chart reading task to assess information : transfer in IAPs. : The first experiment addressed different methods of display...

5.3.2 Optical measurements

USDA-ARS?s Scientific Manuscript database

A comprehensive guide to experimental hydraulics is long overdue. The proposed book first highlights the intrinsic connection between theory and experiment,emphasizing the need for their complementary use. Described next are considerations for the effective design of experiments, including the selec...

Liquid Chromatographic Determination of Nitroanilines: An Experiment for the Quantitative Analysis Laboratory.

ERIC Educational Resources Information Center

Cantwell, Frederick F.; Brown, David W.

1981-01-01

Describes a three-hour liquid chromatography experiment involving rapid separation of colored compounds in glass columns packed with a nonpolar absorbent. Includes apparatus design, sample preparation, experimental procedures, and advantages for this determination. (SK)

The Synthesis of an Amino Acid Derivative and Spectroscopic Monitoring of Dipeptide Formation.

ERIC Educational Resources Information Center

Simmonds, Richard J.

1987-01-01

Described are experiments to give students experience in the synthesis of peptides from amino acids and to use visible spectroscopy to measure a rate of reaction. The activities were designed for undergraduate courses. (RH)

Reducing Threats to Validity by Design in a Nonrandomized Experiment of a School-Wide Prevention Model

ERIC Educational Resources Information Center

Sørlie, Mari-Anne; Ogden, Terje

2014-01-01

This paper reviews literature on the rationale, challenges, and recommendations for choosing a nonequivalent comparison (NEC) group design when evaluating intervention effects. After reviewing frequently addressed threats to validity, the paper describes recommendations for strengthening the research design and how the recommendations were…

An Emerging Learning Design for Student-Generated "iVideos"

ERIC Educational Resources Information Center

Kearney, Matthew; Jones, Glynis; Roberts, Lynn

2012-01-01

This paper describes an emerging learning design for a popular genre of learner-generated video projects: "Ideas Videos" or "iVideos." These advocacy-style videos are short, two-minute, digital videos designed "to evoke powerful experiences about educative ideas" (Wong, Mishra, Koehler & Siebenthal, 2007, p1). We…

Space Shuttle Orbiter thermal protection system design and flight experience

NASA Technical Reports Server (NTRS)

Curry, Donald M.

1993-01-01

The Space Shuttle Orbiter Thermal Protection System materials, design approaches associated with each material, and the operational performance experienced during fifty-five successful flights are described. The flights to date indicate that the thermal and structural design requirements were met and that the overall performance was outstanding.

Design and Construction of Simple, Nitrogen-Laser-Pumped, Tunable Dye Lasers

ERIC Educational Resources Information Center

Hilborn, Robert C.

1978-01-01

The basic physical principles of dye lasers are discussed and used to analyze the design and operation of tunable dye lasers pumped by pulsed nitrogen lasers. Details of the design and construction of these dye lasers are presented. Some simple demonstration experiments are described. (BB)

Project-Based Teaching-Learning Computer-Aided Engineering Tools

ERIC Educational Resources Information Center

Simoes, J. A.; Relvas, C.; Moreira, R.

2004-01-01

Computer-aided design, computer-aided manufacturing, computer-aided analysis, reverse engineering and rapid prototyping are tools that play an important key role within product design. These are areas of technical knowledge that must be part of engineering and industrial design courses' curricula. This paper describes our teaching experience of…

LUX-ZEPLIN (LZ) Technical Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mount, B. J.

In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters.

Designing to Support Critical Engagement with Statistics

ERIC Educational Resources Information Center

Gresalfi, Melissa Sommerfeld

2015-01-01

The purpose of this paper is to describe a trajectory of designing for particular forms of engagement with mathematics. The forms of engagement that were targeted through these design experiments involved making intentional choices about which procedures to leverage in order to support particular claims (what I call "critical…

Conducting Classroom Design Research with Teachers

ERIC Educational Resources Information Center

Stephan, Michelle. L.

2015-01-01

Design research is usually motivated by university members with experience and interest in building theory and instructional designs in collaboration with one teacher. Typically, the teacher is considered as a member of the research team, with the primary responsibility of implementing instruction. However, in this chapter, I describe a Classroom…

Solar array module plasma interactions experiment (SAMPIE) - Science and technology objectives

NASA Technical Reports Server (NTRS)

Hillard, G. B.; Ferguson, Dale C.

1993-01-01

The solar array module plasma interactions experiment (SAMPIE) is an approved NASA flight experiment manifested for Shuttle deployment in early 1994. The SAMPIE experiment is designed to investigate the interaction of high voltage space power systems with ionospheric plasma. To study the behavior of solar cells, a number of solar cell coupons (representing design technologies of current interest) will be biased to high voltages to measure both arcing and current collection. Various theories of arc suppression will be tested by including several specially modified cell coupons. Finally, SAMPIE will include experiments to study the basic nature of arcing and current collection. This paper describes the rationale for a space flight experiment, the measurements to be made, and the significance of the expected results. A future paper will present a detailed discussion of the engineering design.

Actions Versus Likenesses As Determinants of Early Object Concepts.

ERIC Educational Resources Information Center

Latimer, James

This experiment was designed to test whether paired objects described as interacting through movement are more memorable to young children than the same objects described as alike in structure or color. Drawings of eight familiar objects were presented in unfamiliar combinations to forty-five 4-year-old subjects. Objects were described as…

Fine-Tuning in a Design Experiment

ERIC Educational Resources Information Center

Ho, Foo Him; Toh, Pee Choon; Toh, Tin Lam

2013-01-01

Quek, Tay, Toh, Leong, and Dindyal (2011) proposed that a design-theory-practice troika should always be considered for a designed package to be acceptable to the research users who, in this case, are teachers and schools. This paper describes the fine-tuning to the MProSE problem-solving design made by the teachers in the school after first round…

Towards Primary School Physics Teaching and Learning: Design Research Approach. Research Report 256

ERIC Educational Resources Information Center

Juuti, Kalle

2005-01-01

This thesis describes a project to design a primary school physics learning environment which takes into account teachers' needs, design procedures, properties of the learning environment, and pupil learning outcomes. The project's design team has wide experience in research and development work in relation to science education, the use of ICT in…

Design concept for the microwave interrogation structure in PARCS

NASA Technical Reports Server (NTRS)

Dick, G. J.; Klipstein, W. M.; Heavner, T. P.; Jefferts, S. R.

2002-01-01

In this paper we will describe key aspects of the conceptual design of the microwave interrogation structure in the laser-cooled cesium frequency standard that is part of the Primary Atomic Reference Clock in Space (PARCS) experiment.

Ferrimyoglobin-Fluoride.

ERIC Educational Resources Information Center

Russo, Steven O.; Hanania, George I. H.

1990-01-01

Described is an experiment which is designed to investigate the reaction of the protein ferrimyoglobin with fluoride. The activity uses readily available apparatus and the technique of optical absorbance for measurement of concentrations. Experimental design, procedures, and treatment of the equilibrium data are detailed. (CW)

Joint Experiment on Scalable Parallel Processors (JESPP) Parallel Data Management

DTIC Science & Technology

2006-05-01

management and analysis tool, called Simulation Data Grid ( SDG ). The design principles driving the design of SDG are: 1) minimize network communication...or SDG . In this report, an initial prototype implementation of this system is described. This project follows on earlier research, primarily...distributed logging system had some 2 limitations. These limitations will be described in this report, and how the SDG addresses these limitations. 3.0

Designing and Using Open-Ended Software to Promote Conceptual Change.

ERIC Educational Resources Information Center

Horwitz, Paul; Barowy, Bill

1994-01-01

Describes a project that explores the use of interactive computer software for teaching Einstein's special theory of relativity to secondary students. Also describes ways to use computers to help students visualize and experiment with otherwise inaccessible phenomena. (ZWH)

Development of a method of alignment between various SOLAR MAXIMUM MISSION experiments

NASA Technical Reports Server (NTRS)

1977-01-01

Results of an engineering study of the methods of alignment between various experiments for the solar maximum mission are described. The configuration studied consists of the instruments, mounts and instrument support platform located within the experiment module. Hardware design, fabrication methods and alignment techniques were studied with regard to optimizing the coalignment between the experiments and the fine sun sensor. The proposed hardware design was reviewed with regard to loads, stress, thermal distortion, alignment error budgets, fabrication techniques, alignment techniques and producibility. Methods of achieving comparable alignment accuracies on previous projects were also reviewed.

Skylab

NASA Image and Video Library

1970-01-01

This chart describes Skylab's Particle Collection device, a scientific experiment designed to study micro-meteoroid particles in near-Earth space and determine their abundance, mass distribution, composition, and erosive effects. The Marshall Space Flight Center had program management responsibility for the development of Skylab hardware and experiments.

Look at Me!! I'm a Tree!: A Literacy-Based Integrated Thematic Unit on Forestry and Conservation Designed for Field Experiences in Early Childhood Education.

ERIC Educational Resources Information Center

Mayo, Karen E.

This paper describes a literacy-based thematic unit on forestry and conservation designed for field experiences in early childhood education. This unit responds to national and state initiatives and serves as a model for enacting reform of science instruction by equipping preservice teachers with the necessary strategies to foster science process…

Tested Demonstrations. Brownian Motion: A Classroom Demonstration and Student Experiment.

ERIC Educational Resources Information Center

Kirksey, H. Graden; Jones, Richard F.

1988-01-01

Shows how video recordings of the Brownian motion of tiny particles may be made. Describes a classroom demonstration and cites a reported experiment designed to show the random nature of Brownian motion. Suggests a student experiment to discover the distance a tiny particle travels as a function of time. (MVL)

Optimal Foraging by Birds: Experiments for Secondary & Postsecondary Students

ERIC Educational Resources Information Center

Pecor, Keith W.; Lake, Ellen C.; Wund, Matthew A.

2015-01-01

Optimal foraging theory attempts to explain the foraging patterns observed in animals, including their choice of particular food items and foraging locations. We describe three experiments designed to test hypotheses about food choice and foraging habitat preference using bird feeders. These experiments can be used alone or in combination and can…

An Experience-Centered Curriculum: Exercises in Perception, Communication and Action. Educational Studies and Documents No. 17.

ERIC Educational Resources Information Center

Wolsk, David

This study describes a Unesco-sponsored experimental project in the United Nations Associated Schools designed to develop a new approach to education for international understanding. The class, school, and community provide the settings for activities based on the pupils' own behaviors and experiences. Experiments, demonstrations, critical…

The Effectiveness of Placing Temporal Constraints on a Transmedia Stem Learning Experience for Young Children

ERIC Educational Resources Information Center

Paulsen, Christine Andrews; Andrews, Jessica Rueter

2014-01-01

This article describes a transmedia learning experience for early school-aged children. The experience represented an effort to transition a primarily television-based series to a primarily web-based series. Children watched new animation, completed online activities designed to promote STEM (science, technology, engineering, and math)…

A Pennsylvania State University/General Electric Get Away Special (GAS) experiment

NASA Technical Reports Server (NTRS)

Evanisko, George; Grosch, Theodore; Youssef, Milad; Yurack, Jim

1992-01-01

We describe four student-designed experiments by the Pennsylvania State University, which are planned for a GAS canister. The four experiments will measure: the effects of radiation on semiconductors; orbital debris impacts; the Space Shuttle's magnetic field; and the photoelectric yield of several different materials. These experiments are the result of the efforts of more than one hundred students.

Demonstrations of LSS active vibration control technology on representative ground-based testbeds

NASA Technical Reports Server (NTRS)

Hyland, David C.; Phillips, Douglas J.; Collins, Emmanuel G., Jr.

1991-01-01

This paper describes two experiments which successfully demonstrate control of flexible structures. The first experiment involved control design and implementation for the ACES structure at NASA Marshall Space Flight Center, while the second experiment was conducted using the Multi-Hex Prototype structure. The paper concludes with some remarks on the lessons learned from conducting these experiments.

Life sciences payloads for Shuttle

NASA Technical Reports Server (NTRS)

Dunning, R. W.

1974-01-01

The Life Sciences Program for utilization of the Shuttle in the 1980's is presented. Requirements for life sciences research experiments in space flight are discussed along with study results of designs to meet these requirements. The span of life sciences interests in biomedicine, biology, man system integration, bioinstrumentation and life support/protective systems is described with a listing of the research areas encompassed in these descriptions. This is followed by a description of the approach used to derive from the life sciences disciplines, the research functions and instrumentation required for an orbital research program. Space Shuttle design options for life sciences experiments are identified and described. Details are presented for Spacelab laboratories for dedicated missions, mini-labs with carry on characteristics and carry on experiments for shared payload missions and free flying satellites to be deployed and retrieved by the Shuttle.

An experimental investigation of (UF-235)6 fission nuclear-pumped lasers

NASA Technical Reports Server (NTRS)

Miley, G. H.

1979-01-01

A UF6 handling system was designed for use in conjunction with the existing nuclear-pumped laser vacuum system at a nuclear reactor laboratory to perform the experiments described above. A modification to separate the gas fill system from the vacuum system and thus greatly reduce its volume is described as well as operating procedures for the first controlled nuclear pumping experiments with UF6 vapor contained in the laser cell.

Understanding pivotal experiences in behavior change for the design of technologies for personal wellbeing.

PubMed

Bhattacharya, Arpita; Kolovson, Samantha; Sung, Yi-Chen; Eacker, Mike; Chen, Michael; Munson, Sean A; Kientz, Julie A

2018-03-01

Most health technologies are designed to support people who have already decided to work toward better health. Thus, there remains an opportunity to design technologies to help motivate people who have not yet decided to make a change. Understanding the experiences of people who have already started to make a health behavior change and how they made a pivotal decision can be useful in understanding how to design such tools. In this paper, we describe results from data collected in 2 phases. Phase 1 consisted of 127 surveys and 13 interviews with adults who have already accomplished behavior change(s). Phase 2 consisted of 117 surveys and 12 interviews with adults who have either already accomplished their behavior change(s) or are currently working toward them. We identified four factors that lead to pivotal experiences: (1) prolonged discontent and desire to change, (2) significant changes that increase fear or hope of future, (3) increased understanding of one's behavior and personal data, and (4) social accountability. We also describe a design space for designing technology-based interventions for encouraging people to decide to make a change to improve their health. Based on feedback from participants, we discuss opportunities for further exploration of the design space for people who are not yet motivated to change and for ethical considerations for this type of intervention. Copyright © 2018 Elsevier Inc. All rights reserved.

Design guide for secondary road pavements in Virginia.

DOT National Transportation Integrated Search

1973-01-01

A design method for secondary roads (based on AASHO Road Test results and experience in Virginia) is described which consists of two parts: the evaluation of the soil support value of the subgrade, the thickness equivalencies of the paving materials,...

Library Architecture: The Cleveland Experience.

ERIC Educational Resources Information Center

Gaines, Ervin; And Others

1982-01-01

Discusses the importance of a well-designed library building as an important factor in creating social benefits and positive political responses in the community. The creation and implementation of design criteria for the Cleveland Public Library and the public response are described. (CHC)

Technotown: A LEGO Experience. [and] Technotown: A School-Wide Design Technology Project.

ERIC Educational Resources Information Center

Belch, Harry; Knobloch, Stephan F.

1994-01-01

Describes how 900 elementary students planned, designed, and constructed Technotown out of 1 million LEGO pieces. Presents a learning activity (objectives, materials, challenge, evaluation, and closing thoughts) on the building of a subway system for Technotown. (SK)

A design procedure and handling quality criteria for lateral directional flight control systems

NASA Technical Reports Server (NTRS)

Stein, G.; Henke, A. H.

1972-01-01

A practical design procedure for aircraft augmentation systems is described based on quadratic optimal control technology and handling-quality-oriented cost functionals. The procedure is applied to the design of a lateral-directional control system for the F4C aircraft. The design criteria, design procedure, and final control system are validated with a program of formal pilot evaluation experiments.

Design of a 9-loop quasi-exponential waveform generator

NASA Astrophysics Data System (ADS)

Banerjee, Partha; Shukla, Rohit; Shyam, Anurag

2015-12-01

We know in an under-damped L-C-R series circuit, current follows a damped sinusoidal waveform. But if a number of sinusoidal waveforms of decreasing time period, generated in an L-C-R circuit, be combined in first quarter cycle of time period, then a quasi-exponential nature of output current waveform can be achieved. In an L-C-R series circuit, quasi-exponential current waveform shows a rising current derivative and thereby finds many applications in pulsed power. Here, we have described design and experiment details of a 9-loop quasi-exponential waveform generator. In that, design details of magnetic switches have also been described. In the experiment, output current of 26 kA has been achieved. It has been shown that how well the experimentally obtained output current profile matches with the numerically computed output.

Design of a 9-loop quasi-exponential waveform generator.

PubMed

Banerjee, Partha; Shukla, Rohit; Shyam, Anurag

2015-12-01

We know in an under-damped L-C-R series circuit, current follows a damped sinusoidal waveform. But if a number of sinusoidal waveforms of decreasing time period, generated in an L-C-R circuit, be combined in first quarter cycle of time period, then a quasi-exponential nature of output current waveform can be achieved. In an L-C-R series circuit, quasi-exponential current waveform shows a rising current derivative and thereby finds many applications in pulsed power. Here, we have described design and experiment details of a 9-loop quasi-exponential waveform generator. In that, design details of magnetic switches have also been described. In the experiment, output current of 26 kA has been achieved. It has been shown that how well the experimentally obtained output current profile matches with the numerically computed output.

Design and Implementation of the PALM-3000 Real-Time Control System

NASA Technical Reports Server (NTRS)

Truong, Tuan N.; Bouchez, Antonin H.; Burruss, Rick S.; Dekany, Richard G.; Guiwits, Stephen R.; Roberts, Jennifer E.; Shelton, Jean C.; Troy, Mitchell

2012-01-01

This paper reflects, from a computational perspective, on the experience gathered in designing and implementing realtime control of the PALM-3000 adaptive optics system currently in operation at the Palomar Observatory. We review the algorithms that serve as functional requirements driving the architecture developed, and describe key design issues and solutions that contributed to the system's low compute-latency. Additionally, we describe an implementation of dense matrix-vector-multiplication for wavefront reconstruction that exceeds 95% of the maximum sustained achievable bandwidth on NVIDIA Geforce 8800GTX GPU.

Mathematical Making in Teacher Preparation: What Knowledge Is Brought to Bear?

ERIC Educational Resources Information Center

Greenstein, Steven; Seventko, Justin

2017-01-01

In this paper, we describe an experience within mathematics teacher preparation that engages preservice teachers (PSTs) in Making and design practices that we hypothesized would inform their conceptual and pedagogical thinking. With a focus on the design of new tools to support mathematics teaching and learning, this Learning by Design experience…

Designing and Implementing a Mentoring Program to Support Clinically-Based Teacher Education

ERIC Educational Resources Information Center

Henning, John E.; Gut, Dianne; Beam, Pamela

2015-01-01

This article describes one teacher preparation program's approach to designing and implementing a mentoring program to support clinically-based teacher education. The design for the program is based on an interview study that compared the mentoring experiences of 18 teachers across three different contexts: student teaching, early field…

Preparing University Students to Lead K-12 Engineering Outreach Programmes: A Design Experiment

ERIC Educational Resources Information Center

Anthony, Anika B.; Greene, Howard; Post, Paul E.; Parkhurst, Andrew; Zhan, Xi

2016-01-01

This paper describes an engineering outreach programme designed to increase the interest of under-represented youth in engineering and to disseminate pre-engineering design challenge materials to K-12 educators and volunteers. Given university students' critical role as facilitators of the outreach programme, researchers conducted a two-year…

Role of Geology in Science Teaching.

ERIC Educational Resources Information Center

Kolesar, Peter Thomas

1989-01-01

Described is a teacher education course designed to give future elementary school teachers hands-on experience in hypothesis formation and testing. Four science experiences are discussed which involve different earth science principles including: porosity and permeability; freezing and thawing; river discharge and sedimentation; and groundwater…

An Experimental Fish Ethology Unit.

ERIC Educational Resources Information Center

Fisher, Ronald L., Jr.; Novak, John A.

1984-01-01

Describes a series of four experiments designed for small group involvement (each requiring 6 days) emphasizing students' scientific methodology. Topics include: feeding behavior; light/temperature effects on reproduction; effect of density on feeding; and altered male/female ratios on male behavior. Each experiment includes introduction, material…

Biology Notes.

ERIC Educational Resources Information Center

School Science Review, 1979

1979-01-01

Organized by topic is a reading list for A- and S-level biology. Described are experiments for measuring rate of water uptake in a shoot; questions to aid students in designing experiments; rise of overhead projection to demonstrate osmosis and blood cell counting; and microbial manufacture of vinegar. (CS)

Exploring the Experiences of Administrative Interns

ERIC Educational Resources Information Center

Jamison, Kimberly; Clayton, Jennifer

2016-01-01

Purpose: The purpose of this paper is to identify how current administrative interns enrolled in a university administrator preparation program describe and make meaning of their internship experiences. Design/methodology/approach: For this qualitative study, the researchers interviewed administrative interns enrolled in one university preparation…

Guided Anarchy in an Introductory Physics Laboratory

ERIC Educational Resources Information Center

Heller, Kenneth

1973-01-01

Describes a physics laboratory course which operates without written instructions and with no required experiments. Course is based upon one- or two-week topics in mechanics, heat, electromagnetism and optics with a student-designed experiment in modern physics as an extended project. (DF)

Experimental studies of two-stage centrifugal dust concentrator

NASA Astrophysics Data System (ADS)

Vechkanova, M. V.; Fadin, Yu M.; Ovsyannikov, Yu G.

2018-03-01

The article presents data of experimental results of two-stage centrifugal dust concentrator, describes its design, and shows the development of a method of engineering calculation and laboratory investigations. For the experiments, the authors used quartz, ceramic dust and slag. Experimental dispersion analysis of dust particles was obtained by sedimentation method. To build a mathematical model of the process, dust collection was built using central composite rotatable design of the four factorial experiment. A sequence of experiments was conducted in accordance with the table of random numbers. Conclusion were made.

Consort 1 sounding rocket flight

NASA Technical Reports Server (NTRS)

Wessling, Francis C.; Maybee, George W.

1989-01-01

This paper describes a payload of six experiments developed for a 7-min microgravity flight aboard a sounding rocket Consort 1, in order to investigate the effects of low gravity on certain material processes. The experiments in question were designed to test the effect of microgravity on the demixing of aqueous polymer two-phase systems, the electrodeposition process, the production of elastomer-modified epoxy resins, the foam formation process and the characteristics of foam, the material dispersion, and metal sintering. The apparatuses designed for these experiments are examined, and the rocket-payload integration and operations are discussed.

Learning community health nursing concepts from clinical experience.

PubMed

Lasater, Kathie; Luce, Linda; Volpin, Miriam; Terwilliger, Allison; Wild, Jackson

2007-01-01

Clinical faculty often struggle to design competency demonstrations that promote quality learning experiences. A nursing program in Oregon combined mental health and community health nursing practica and required well-planned, integrated competency demonstrations. This requirement became the impetus for students to promote the health of clients and learn clinical concepts that are difficult to experience in a typical term. Faculty coached students to make a significant contribution that would last beyond their clinical practica. A case study in competency demonstration design is described, and implications for curriculum development are presented.

Self-optimisation and model-based design of experiments for developing a C-H activation flow process.

PubMed

Echtermeyer, Alexander; Amar, Yehia; Zakrzewski, Jacek; Lapkin, Alexei

2017-01-01

A recently described C(sp 3 )-H activation reaction to synthesise aziridines was used as a model reaction to demonstrate the methodology of developing a process model using model-based design of experiments (MBDoE) and self-optimisation approaches in flow. The two approaches are compared in terms of experimental efficiency. The self-optimisation approach required the least number of experiments to reach the specified objectives of cost and product yield, whereas the MBDoE approach enabled a rapid generation of a process model.

Space hardware designs, volume 1

NASA Technical Reports Server (NTRS)

Meyer, Rudolf X.; Cribbs, Richard; Honda, Mark; Ma, Christina; Robson, Christopher

1994-01-01

The design of a solar sail space vehicle with a novel sail deployment mechanism is described. The sail is triangular in shape and is deployed and stabilized by three miniature spacecraft, one at each corner of the triangle. A concept demonstrator for a spherical microrover for the exploration of a planetary surface is described. Lastly, laboratory experiments have been conducted to study the migration of thin oil films on metal surfaces in the presence of a thermal gradient.

Experimental demonstration of active vibration control for flexible structures

NASA Technical Reports Server (NTRS)

Phillips, Douglas J.; Hyland, David C.; Collins, Emmanuel G., Jr.

1990-01-01

Active vibration control of flexible structures for future space missions is addressed. Three experiments that successfully demonstrate control of flexible structures are described. The first is the pendulum experiment. The structure is a 5-m compound pendulum and was designed as an end-to-end test bed for a linear proof mass actuator and its supporting electronics. Experimental results are shown for a maximum-entropy/optimal-projection controller designed to achieve 5 percent damping in the first two pendulum modes. The second experiment was based upon the Harris Multi-Hex prototype experiment (MHPE) apparatus. This is a large optical reflector structure comprising a seven-panel array and supporting truss which typifies a number of generic characteristics of large space systems. The third experiment involved control design and implementation for the ACES structure at NASA Marshall Space Flight Center. The authors conclude with some remarks on the lessons learned from conducting these experiments.

Preliminary design work on a DSN VLBI correlator. [Deep Space Network

NASA Technical Reports Server (NTRS)

Lushbaugh, W. A.; Layland, J. W.

1978-01-01

The Deep Space Network is in the process of fielding high-density digital instrumentation recorders for support of the Pioneer Venus 1978 entry experiment and other related tasks. It has long been obvious that these recorders would also serve well as the recording medium for very long base interferometry (VLBI) experiments with relatively weak radio sources, provided that a suitable correlation processor for these tape recordings could be established. The overall design and current status of a VLBI correlator designed to mate with these tape recorders are described.

Design and operating experience on the US Department of Energy experimental Mod-0 100-kW wind turbine

NASA Technical Reports Server (NTRS)

Glasgow, J. C.; Birchenough, A. G.

1978-01-01

The experimental wind turbine was designed and fabricated to assess technology requirements and engineering problems of large wind turbines. The machine has demonstrated successful operation in all of its design modes and served as a prototype developmental test bed for the Mod-0A operational wind turbines which are currently used on utility networks. The mechanical and control system are described as they evolved in operational tests and some of the experience with various systems in the downwind rotor configurations are elaborated.

A review of active learning approaches to experimental design for uncovering biological networks

PubMed Central

2017-01-01

Various types of biological knowledge describe networks of interactions among elementary entities. For example, transcriptional regulatory networks consist of interactions among proteins and genes. Current knowledge about the exact structure of such networks is highly incomplete, and laboratory experiments that manipulate the entities involved are conducted to test hypotheses about these networks. In recent years, various automated approaches to experiment selection have been proposed. Many of these approaches can be characterized as active machine learning algorithms. Active learning is an iterative process in which a model is learned from data, hypotheses are generated from the model to propose informative experiments, and the experiments yield new data that is used to update the model. This review describes the various models, experiment selection strategies, validation techniques, and successful applications described in the literature; highlights common themes and notable distinctions among methods; and identifies likely directions of future research and open problems in the area. PMID:28570593

Modeling Fish Growth in Low Dissolved Oxygen

ERIC Educational Resources Information Center

Neilan, Rachael Miller

2013-01-01

This article describes a computational project designed for undergraduate students as an introduction to mathematical modeling. Students use an ordinary differential equation to describe fish weight and assume the instantaneous growth rate depends on the concentration of dissolved oxygen. Published laboratory experiments suggest that continuous…

Using Mother Nature to Subdue Energy Costs.

ERIC Educational Resources Information Center

Fickes, Michael

1997-01-01

Describes a Kansas City elementary school's successful energy conservation via its environmental design that includes the use of ground source heat pumps and computer energy management systems. Also discusses how this design concept contributes to the educational experience of the school's students. (GR)

Evaluating Four Years of ID Experience.

ERIC Educational Resources Information Center

Miles, Gearold D.

1983-01-01

Describes the introduction of professionally qualified instructional designers into the Professional Education Division of Arthur Anderson and Co., an international public accounting and professional services firm. The difficulties and misunderstandings that were overcome and the role the instructional designers now play in providing training…

The design, implementation, and use of a statewide land use inventory: The New York experience

NASA Technical Reports Server (NTRS)

Hardy, E. E.

1975-01-01

The New York State land use and natural resource inventory is described with emphasis on its design, implementation, and user requirements. Other topics discussed include: classification, data acquisition, geographic referencing, data storage, data retrieval, and documentation.

Steps for Washroom and Locker Room Sustainability.

ERIC Educational Resources Information Center

Wiens, Janet

2003-01-01

Administrators and design teams can use proven approaches to create sustainable washrooms and locker rooms. Presents design strategies related to lighting, flooring, and water conservation that contribute to sustainability, then describes one college's experiences developing sustainable architecture, explaining how the building takes full…

Design of a High Thermal Gradient Bridgman Furnace

NASA Technical Reports Server (NTRS)

LeCroy, J. E.; Popok, D. P.

1994-01-01

The Advanced Automated Directional Solidification Furnace (AADSF) is a Bridgman-Stockbarger microgravity processing facility, designed and manifested to first fly aboard the second United States Microgravity Payload (USMP-2) Space Shuttle mission. The AADSF was principally designed to produce high axial thermal gradients, and is particularly suitable for metals solidification experiments, including non-dilute alloys. To accommodate a wider range of experimental conditions, the AADSF is equipped with a reconfigurable gradient zone. The overall design of the AADSF and the relationship between gradient zone design and furnace performance are described. Parametric thermal analysis was performed and used to select gradient zone design features that fulfill the high thermal gradient requirements of the USMP-2 experiment. The thermal model and analytical procedure, and parametric results leading to the first flight gradient zone configuration, are presented. Performance for the USMP-2 flight experiment is also predicted, and analysis results are compared to test data.

Conceptual Design of an In-Space Cryogenic Fluid Management Facility

NASA Technical Reports Server (NTRS)

Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

1981-01-01

The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is presented. The proposed facility consisting of a supply tank, receiver tank, pressurization system, instrumentation, and supporting hardware, is described. The experimental objectives, the receiver tank to be modeled, and constraints imposed on the design by the space shuttle, Spacelab, and scaling requirements, are described. The conceptual design, including the general configurations, flow schematics, insulation systems, instrumentation requirements, and internal tank configurations for the supply tank and the receiver tank, is described. Thermal, structural, fluid, and safety and reliability aspects of the facility are analyzed. The facility development plan, including schedule and cost estimates for the facility, is presented. A program work breakdown structure and master program schedule for a seven year program are included.

Chickens across the Curriculum: An Experiment in Experiential Learning.

ERIC Educational Resources Information Center

Poulsen, Kristin; And Others

This paper describes: (1) the experiences of a class of 6- and 7-year-old students as they designed and built a small farm on the Laboratory School grounds at Berry College (Georgia); (2) the understanding that comes with the relevant and meaningful experience of building a farm and raising animals; (3) the infusion of Friedrich Froebel's…

Random Assignment within Schools: Lessons Learned from the Teach for America Experiment

ERIC Educational Resources Information Center

Glazerman, Steven

2012-01-01

Randomized trials are a common way to provide rigorous evidence on the impacts of education programs. This article discusses the trade-offs associated with study designs that involve random assignment of students within schools and describes the experience from one such study of Teach for America (TFA). The TFA experiment faced challenges with…

Tool for Experimenting with Concepts of Mobile Robotics as Applied to Children's Education

ERIC Educational Resources Information Center

Jimenez Jojoa, E. M.; Bravo, E. C.; Bacca Cortes, E. B.

2010-01-01

This paper describes the design and implementation of a tool for experimenting with mobile robotics concepts, primarily for use by children and teenagers, or by the general public, without previous experience in robotics. This tool helps children learn about science in an approachable and interactive way, using scientific research principles in…

Education Through the Dance Experience. Designed for Children Series.

ERIC Educational Resources Information Center

Docherty, David

This text presents a creative, child-centered approach to the teaching of dance in the elementary school based on the theories and methods of Rudolf Laban and Joyce Boorman. The content area of dance is briefly described so that the practical experiences presented later in the text can be viewed in perspective. Dance experiences are presented that…

An Experimental Investigation of the Role of Radiation in Laboratory Bench-Top Experiments in Thermal Physics

ERIC Educational Resources Information Center

Twomey, Patrick; O'Sullivan, Colm; O'Riordan, John

2009-01-01

A simple undergraduate experiment designed to study cooling purely by radiation and cooling by a combination of convection and radiation is described. Results indicate that the contribution from radiative cooling in normal laboratory experiments is more significant than students often realize, even in the case of forced cooling. (Contains 1…

The new frontier of public health education.

PubMed

Birnbaum, David; Gretsinger, Kathryn; Ellis, Ursula

2017-02-06

Purpose The aim of this paper is to describe the experience and educational benefits of a course that has several unique educational design features. Design/methodology/approach This includes narrative description of faculty and student experience from participants in a flipped-instructional-design inter-professional education course. Findings "Improving Public Health - An Interprofessional Approach to Designing and Implementing Effective Interventions" is an undergraduate public health course open to students regardless of background. Its student activities mirror the real-life tasks and challenges of working in a public health agency, including team-building and leadership; problem and project definition and prioritization; evidence-finding and critical appraisal; written and oral presentation; and press interviews. Students successfully developed project proposals to address real problems in a wide range of communities and settings and refined those proposals through interaction with professionals from population and public health, journalism and library sciences. Practical implications Undergraduate public health education is a relatively new endeavor, and experience with this new approach may be of value to other educators. Originality/value Students in this course, journalism graduate students who conducted mock interviews with them and instructors who oversaw the course all describe unique aspects and related personal benefit from this novel approach.

Functional Allocation with Airborne Self-Separation Evaluated in a Piloted Simulation

NASA Technical Reports Server (NTRS)

Wing, David J.; Murdoch, Jennifer L.; Chamberlain, James P.; Consiglio, Maria C.; Hoardley, Sherwood T.; Hubbs, Clay E.; Palmer, Michael T.

2010-01-01

A human-in-the-loop simulation experiment was designed and conducted to evaluate an airborne self-separation concept. The activity supports the National Aeronautics and Space Administration s (NASA) research focus on function allocation for separation assurance. The objectives of the experiment were twofold: (1) use experiment design features in common with a companion study of ground-based automated separation assurance to promote comparability, and (2) assess agility of self-separation operations in managing trajectory-changing events in high traffic density, en-route operations with arrival time constraints. This paper describes the experiment and presents initial results associated with subjective workload ratings and group discussion feedback obtained from the experiment s commercial transport pilot participants.

An Entrance Region Mass Transfer Experiment.

ERIC Educational Resources Information Center

Youngquist, G. R.

1979-01-01

This paper describes an experiment designed to reveal the consequences of the development of a concentration boundary layer. The rate of a mass transfer limited electrochemical reaction is measured and used to obtain the dependence of average Sherwood number on Reynolds number and entrance length. (Author/BB)

Old Wine into New Bottles.

ERIC Educational Resources Information Center

Crandall, G. Douglas

1997-01-01

Discusses how traditional lab exercises can be converted into investigative exercises. Describes an exercise on seed germination that has students design their own experiments based on their initial results. Involves students in the scientific process and allows them to experience the joys and disappointments of experimental work. (JRH)

Plants on the Move

ERIC Educational Resources Information Center

Bricker, Mary

2009-01-01

When it comes to directly interacting with and doing experiments with organisms, plants have some distinct advantages over animals. Their diversity and accessibility allows students to use them in experiments, thus practicing important science inquiry skills. This article describes an investigation that was designed to help students appreciate the…

It's the Berries.

ERIC Educational Resources Information Center

Hopkins, Martha H. (Marty)

1997-01-01

Describes a mathematical investigation centered on collecting and analyzing data in a scientific setting. The first experiment teaches the basics of data collection--students should be able to identify variables that might have affected experimental results. The second activity includes designing an experiment to control for these variables. The…

Positive Pitfalls

ERIC Educational Resources Information Center

Schneider, Michael

2004-01-01

This article describes how Cahokia middle and high school students conduct inquiry-based science through a pitfall trap experiment. In a collaborative effort, students designed and conducted pitfall trap investigations that combined their interest in the natural world with their love of technology. The students set up their own experiments to…

A Pharmacogenetic Screening Experiment Demonstrating Principles of Genetic Constitution on Drug Metabolism.

ERIC Educational Resources Information Center

Robbins, Doris K.; Wedlund, Peter J.

1990-01-01

A laboratory experiment designed to provide rapid, inexpensive student exposure to pharmacogenetics in drug elimination and patient therapy is described. The test, performed on students, determines expression of a drug metabolism enzyme following ingestion of a probe drug. (Author/MSE)

Modular space station phase B extension preliminary system design. Volume 7: Ancillary studies

NASA Technical Reports Server (NTRS)

Jones, A. L.

1972-01-01

Sortie mission analysis and reduced payloads size impact studies are presented. In the sortie mission analysis, a modular space station oriented experiment program to be flown by the space shuttle during the period prior to space station IOC is discussed. Experiments are grouped into experiment packages. Mission payloads are derived by grouping experiment packages and by adding support subsystems and structure. The operational and subsystems analyses of these payloads are described. Requirements, concepts, and shuttle interfaces are integrated. The sortie module/station module commonality and a sortie laboratory concept are described. In the payloads size analysis, the effect on the modular space station concept of reduced diameter and reduced length of the shuttle cargo bay is discussed. Design concepts are presented for reduced sizes of 12 by 60 ft, 14 by 40 ft, and 12 by 40 ft. Comparisons of these concepts with the modular station (14 by 60 ft) are made to show the impact of payload size changes.

Experiences and emotions of faculty teaching in accelerated second baccalaureate degree nursing programs.

PubMed

Brandt, Cheryl L; Boellaard, Melissa R; Zorn, Cecelia R

2013-07-01

The number of accelerated second baccalaureate degree nursing (ASBSN) programs has mushroomed over recent decades, with more than 225 currently in existence. Scholars have described students and programs, but research examining the faculty experience is limited. The purpose of this study was to describe the experiences and emotions of faculty teaching students in ASBSN programs. Using a descriptive qualitative survey design, faculty (N = 138) from 25 randomly selected programs in 11 midwestern states were surveyed using an instrument developed for this study and distributed online. Ten themes emerged, including (a) Engaging With Motivated, Mature, and Diverse Students, (b) Students Choosing Nursing for the "Wrong Reasons," (c) Too Much Work, Too Little Time for Students and Faculty, (d) Amazement, (e) Pride, and (f) Frustration. These findings will help novice and seasoned ASBSN faculty interpret their experiences, strengthen precepting and mentoring activities, and support administrators in determining staffing plans and designing ASBSN programs. Copyright 2013, SLACK Incorporated.

Experiences with an adaptive design for a dose-finding study in patients with osteoarthritis.

PubMed

Miller, Frank; Björnsson, Marcus; Svensson, Ola; Karlsten, Rolf

2014-03-01

Dose-finding studies in non-oncology areas are usually conducted in Phase II of the development process of a new potential medicine and it is key to choose a good design for such a study, as the results will decide if and how to proceed to Phase III. The present article has focus on the design of a dose-finding study for pain in osteoarthritis patients treated with the TRPV1 antagonist AZD1386. We describe different design alternatives in the planning of this study, the reasoning for choosing the adaptive design and experiences with conduct and interim analysis. Three alternatives were proposed: one single dose-finding study with parallel design, a programme with a smaller Phase IIa study followed by a Phase IIb dose-finding study, and an adaptive dose-finding study. We describe these alternatives in detail and explain why the adaptive design was chosen for the study. We give insights in design aspects of the adaptive study, which need to be pre-planned, like interim decision criteria, statistical analysis method and setup of a Data Monitoring Committee. Based on the interim analysis it was recommended to stop the study for futility since AZD1386 showed no significant pain decrease based on the primary variable. We discuss results and experiences from the conduct of the study with the novel design approach. Huge cost savings have been done compared to if the option with one dose-finding design for Phase II had been chosen. However, we point out several challenges with this approach. Copyright © 2014 Elsevier Inc. All rights reserved.

Searching for Authentic Context in Designing PISA-like Mathematics Problem: From Indoor to Outdoor Field Experience

NASA Astrophysics Data System (ADS)

Siswono, T. Y. E.; Kohar, A. W.; Rosyidi, A. H.; Hartono, S.; Masriyah

2018-01-01

Designing problem like in PISA is known as a challenging activity for teachers particularly as the use of authentic context within that type of problem. This paper aims to describe the experiences of secondary mathematics teachers in designing PISA-like problems within an innovative training program focusing on building teachers’ understanding on the concept of mathematical literacy. The teachers were engaged in a set of problem-solving and problem-posing activities using PISA-based problem within indoor and outdoor field experiences. Within indoor field experience, the teachers worked collaboratively in groups on designing PISA-like problems with a given context through problem generation and reformulation techniques. Within outdoor field experience, they worked on designing PISA-like problems with self-chosen context from the place where the outdoor field experience took place. Our analysis indicates that there were improvements on the PISA-like problems designed by teachers based on its level use of context from indoor to outdoor experience. Also, the teachers were relatively successful with creating appropriate and motivating contexts by harnessing a variety of context consisting of personal, occupational, societal, and scientific contexts. However, they still experienced difficulties in turning these contexts into an appropriate problem satisfying PISA framework such as regarding authenticity of context use, language structure, and PISA task profile.

Development and characteristics of the hardware for Skylab experiment S015

NASA Technical Reports Server (NTRS)

Thirolf, R. G.

1975-01-01

Details are given regarding the hardware for the Skylab S015 experiment, which was designed to detect the effects of zero gravity on cell growth rates. Experience gained in hardware-related considerations is presented for use of researchers concerned with future research of this type and further study of the S015 results. Brief descriptions are given of the experiment hardware, the hardware configuration for the critical design review, the major configuration changes, the final configuration, and the postflight review and analysis. An appendix describes pertinent documentation, film, and hardware that are available to qualified researchers; sources for additional or special information are given.

Development of a Plastic Melt Waste Compactor for Space Missions Experiments and Prototype Design

NASA Technical Reports Server (NTRS)

Pace, Gregory; Wignarajah, Kanapathipillai; Pisharody, Suresh; Fisher, John

2004-01-01

This paper describes development at NASA Ames Research Center of a heat melt compactor that can be used on both near term and far term missions. Experiments have been performed to characterize the behavior of composite wastes that are representative of the types of wastes produced on current and previous space missions such as International Space Station, Space Shuttle, MIR and Skylab. Experiments were conducted to characterize the volume reduction, bonding, encapsulation and biological stability of the waste composite and also to investigate other key design issues such as plastic extrusion, noxious off-gassing and removal of the of the plastic waste product from the processor. The experiments provided the data needed to design a prototype plastic melt waste processor, a description of which is included in the paper.

Using implementation science as the core of the doctor of nursing practice inquiry project.

PubMed

Riner, Mary E

2015-01-01

New knowledge in health care needs to be implemented for continuous practice improvement. Doctor of nursing practice (DNP) programs are designed to increase clinical practice knowledge and leadership skills of graduates. This article describes an implementation science course developed in a DNP program focused on advancing graduates' capacity for health systems leadership. Curriculum and course development are presented, and the course is mapped to depict how the course objectives and assignments were aligned with DNP Essentials. Course modules with rational are described, and examples of how students implemented assignments are provided. The challenges of integrating this course into the life of the school are discussed as well as steps taken to develop faculty for this capstone learning experience. This article describes a model of using implementation science to provide DNP students an experience in designing and managing an evidence-based practice change project. Copyright © 2015 Elsevier Inc. All rights reserved.

Reflections of Native American Teen Mothers

PubMed Central

Palacios, Janelle; Kennedy, Holly Powell

2010-01-01

Objective To understand the previously lived experience of early childbearing among adult Native American women. Design A community-based participatory research approach. Setting The first interview took place at a mutually agreed upon time and place and averaged 120 minutes. Second interviews were conducted 1 to 3 months later. Participants A convenience sample of 30 self-identified Native American adult women was recruited, and a semi-structured interview explored their early childbearing experiences. Method An interpretive phenomenological study was conducted with a Northwestern tribe. Results All of the women in the study described stressful childhoods. Two primary themes were identified: “Chaotic childhoods,” represented stressful events in youth that introduced or resulted in ongoing chaos in women’s lives. “Diminished childhoods” was used to describe early maturity as a result of assuming extensive responsibilities at a young age. Conclusions The findings suggest that the childhood experiences described by participants may be related to the risk for early childbearing. Prospective research should examine the relationship between young women’s lives and early childbearing in order to design interventions to support them in postponing pregnancy and when they do become pregnant. PMID:20629929

The F-15B Propulsion Flight Test Fixture: A New Flight Facility For Propulsion Research

NASA Technical Reports Server (NTRS)

Corda, Stephen; Vachon, M. Jake; Palumbo, Nathan; Diebler, Corey; Tseng, Ting; Ginn, Anthony; Richwine, David

2001-01-01

The design and development of the F-15B Propulsion Flight Test Fixture (PFTF), a new facility for propulsion flight research, is described. Mounted underneath an F-15B fuselage, the PFTF provides volume for experiment systems and attachment points for propulsion devices. A unique feature of the PFTF is the incorporation of a six-degree-of-freedom force balance. Three-axis forces and moments can be measured in flight for experiments mounted to the force balance. The NASA F-15B airplane is described, including its performance and capabilities as a research test bed aircraft. The detailed description of the PFTF includes the geometry, internal layout and volume, force-balance operation, available instrumentation, and allowable experiment size and weight. The aerodynamic, stability and control, and structural designs of the PFTF are discussed, including results from aerodynamic computational fluid dynamic calculations and structural analyses. Details of current and future propulsion flight experiments are discussed. Information about the integration of propulsion flight experiments is provided for the potential PFTF user.

The Additive Coloration of Alkali Halides

ERIC Educational Resources Information Center

Jirgal, G. H.; and others

1969-01-01

Describes the construction and use of an inexpensive, vacuum furnace designed to produce F-centers in alkali halide crystals by additive coloration. The method described avoids corrosion or contamination during the coloration process. Examination of the resultant crystals is discussed and several experiments using additively colored crystals are…

Developing Mobile Based Instruction

ERIC Educational Resources Information Center

Martin, Florence; Pastore, Raymond; Snider, Jean

2012-01-01

This paper describes an instructional design class's experience developing instruction for the mobile web. The class was taught at a southeastern university in the United States in a master's level computer based instruction course. Two example projects are showcased and student reflections on design issues are highlighted. Additionally,…

Courseware Design by College Students: The Educational Gains.

ERIC Educational Resources Information Center

Or-Bach, Rachel

2000-01-01

Describes the experience gained during several years of teaching courses on CBT (computer-based training) design to undergraduate students with varying backgrounds and interests. Discusses the theoretical background for the potential benefits; preparation for lifelong learning; information technology literacy and teaching multimedia development; a…

Reflecting Indigenous Culture in Educational Software Design.

ERIC Educational Resources Information Center

Fleer, Marilyn

1989-01-01

Discusses research on Australian Aboriginal cognition which relates to the development of appropriate educational software. Describes "Tinja," a software program using familiar content and experiences, Aboriginal characters and cultural values, extensive graphics and animation, peer and group work, and open-ended design to help young…

Designing Templates for Interactive Tasks in CALL Tutorials.

ERIC Educational Resources Information Center

Ruhlmann, Felicitas

The development of templates for computer-assisted language learning (CALL) is discussed, based on experiences with primarily linear multimedia tutorial programs. Design of templates for multiple-choice questions and interactive tasks in a prototype module is described. Possibilities of enhancing interactivity by introducing problem-oriented…

Using ArchE in the Classroom: One Experience

DTIC Science & Technology

2007-09-01

The Architecture Expert (ArchE) tool serves as a software architecture design assistant. It embodies knowledge of quality attributes and the relation...between the achievement of quality attribute requirements and architecture design . This technical note describes the use of a pre-alpha release of

The cryogenics design of the SuperCDMS SNOLAB experiment

NASA Astrophysics Data System (ADS)

Hollister, M. I.; Bauer, D. A.; Dhuley, R. C.; Lukens, P.; Martin, L. D.; Ruschman, M. K.; Schmitt, R. L.; Tatkowski, G. L.

2017-12-01

The Super Cryogenic Dark Matter Search (SuperCDMS) experiment is a direct detection dark matter experiment intended for deployment to the SNOLAB underground facility in Ontario, Canada. With a payload of up to 186 germanium and silicon crystal detectors operating below 15 mK, the cryogenic architecture of the experiment is complex. Further, the requirement that the cryostat presents a low radioactive background to the detectors limits the materials and techniques available for construction, and heavily influences the design of the cryogenics system. The resulting thermal architecture is a closed cycle (no liquid cryogen) system, with stages at 50 and 4 K cooled with gas and fluid circulation systems and stages at 1 K, 250 mK and 15 mK cooled by the lower temperature stages of a large, cryogen-free dilution refrigerator. This paper describes the thermal design of the experiment, including details of the cooling systems, mechanical designs and expected performance of the system under operational conditions.

Using innovative instructional technology to meet training needs in public health: a design process.

PubMed

Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

2014-03-01

Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

The development of the experimental setup for measuring the cell membrane electrical potential by Sucrose-Gap Technique

NASA Astrophysics Data System (ADS)

Yuzhakov, AD; Nosarev, AV; Aleinik, AN

2017-11-01

This article describes the development of the experimental setup for measuring the cell membrane electrical potential by Double -Sucrose-Gap Technique. The double-gap isolation method allows the simultaneous measurement of electrical activity and tension output from contracting segments of muscle fibers. This technique has been widely used as a convenient tool for recording of the membrane activities from myelinated or unmyelinated nerves and muscle preparations. This device can be an effective way to provide undergraduate biomedical engineering students with invaluable experiences in neurophysiology. The installation design and its main characteristics are described. The advantages of the described device are the simplicity of the experiment, relatively low cost, the possibility of long-term experiment.

Designing a Strategic Plan through an Emerging Knowledge Generation Process: The ATM Experience

ERIC Educational Resources Information Center

Zanotti, Francesco

2012-01-01

Purpose: The aim of this contribution is to describe a new methodology for designing strategic plans and how it was implemented by ATM, a public transportation agency based in Milan, Italy. Design/methodology/approach: This methodology is founded on a new system theory, called "quantum systemics". It is based on models and metaphors both…

The Fidelity and Usability of 5-DIE: A Design Study of Enacted Cyberlearning

ERIC Educational Resources Information Center

Kern, Cindy L.; Crippen, Kent J.; Skaza, Heather

2014-01-01

This paper describes a design study of a cyberlearning instructional unit about climate change created with a new inquiry-based design framework, the 5-featured Dynamic Inquiry Enterprise (5-DIE). The 5-DIE framework was created to address the need for authentic science inquiry experiences in cyberlearning environments that leverage existing tools…

Using a Discussion about Scientific Controversy to Teach Central Concepts in Experimental Design

ERIC Educational Resources Information Center

Bennett, Kimberley Ann

2015-01-01

Students may need explicit training in informal statistical reasoning in order to design experiments or use formal statistical tests effectively. By using scientific scandals and media misinterpretation, we can explore the need for good experimental design in an informal way. This article describes the use of a paper that reviews the measles mumps…

A CBI Model for the Design of CAI Software by Teachers/Nonprogrammers.

ERIC Educational Resources Information Center

Tessmer, Martin; Jonassen, David H.

This paper describes a design model presented in workbook form which is intended to facilitate computer-assisted instruction (CAI) software design by teachers who do not have programming experience. Presentation of the model is preceded by a number of assumptions that underlie the instructional content and methods of the textbook. It is argued…

The Development of Teaching Skills to Support Active Learning in University Science (ALIUS)

ERIC Educational Resources Information Center

Bedgood, Danny R., Jr.; Bridgeman, Adam J.; Buntine, Mark; Mocerino, Mauro; Southam, Daniel; Lim, Kieran F.; Gardiner, Michael; Yates, Brian; Morris, Gayle; Pyke, Simon M.; Zadnik, Marjan

2010-01-01

This paper describes an Australian Learning and Teaching Council funded project for which Learning Design is encompassed in the broadest sense. ALIUS (Active Learning In University Science) takes the design of learning back to the learning experiences created for students. ALIUS is not about designing a particular activity, or subject, or course,…

The Airborne Visible / Infrared Imaging Spectrometer AVIS: Design, Characterization and Calibration.

PubMed

Oppelt, Natascha; Mauser, Wolfram

2007-09-14

The Airborne Visible / Infrared imaging Spectrometer AVIS is a hyperspectralimager designed for environmental monitoring purposes. The sensor, which wasconstructed entirely from commercially available components, has been successfullydeployed during several experiments between 1999 and 2007. We describe the instrumentdesign and present the results of laboratory characterization and calibration of the system'ssecond generation, AVIS-2, which is currently being operated. The processing of the datais described and examples of remote sensing reflectance data are presented.

Terrestrial Planet Finder Interferometer: Architecture, Mission Design, and Technology Development

NASA Technical Reports Server (NTRS)

Henry, Curt

2004-01-01

This slide presentation represents an overview progress report about the system design and technology development of two interferometer concepts studied for the Terrestrial Planet Finder (TPF) project. The two concepts are a structurally-connected interferometer (SCI) intended to fulfill minimum TPF science goals and a formation-flying interferometer (FFI) intended to fulfill full science goals. Described are major trades, analyses, and technology experiments completed. Near term plans are also described. This paper covers progress since August 2003

Concepts for the development of light-weight composite structures for rotor burst containment

NASA Technical Reports Server (NTRS)

Holms, A. G.

1977-01-01

Published results on rotor burst containment with single materials, and on body armor using composite materials were used to establish a set of hypotheses about what variables might control the design of a weight-efficient protective device. Based on modern concepts for the design and analysis of small optimum seeking experiments, a particular experiment for evaluating the hypotheses and materials was designed. The design and methods for the analysis of results are described. The consequence of such hypotheses is that the device should consist of as many as four concentric rings, each to consist of a material uniquely chosen for its position in the penetration sequence.

Training to Enhance Design Team Performance: A Cure for Tunnel Vision

NASA Technical Reports Server (NTRS)

Parker, James W.; Parker, Nelson C. (Technical Monitor)

2001-01-01

Design Team performance is a function of the quality and degree of academic training and the cumulative, learned experience of the individual members of the team. Teamwork, leadership, and communications certainly are factors that affect the measure of the performance of the team, but they are not addressed here. This paper focuses on accelerating the learned experience of team members and describes an organizational approach that can significantly increase the effective experience level for any engineering design team. The performance measure of the whole team can be increased by increasing the engineering disciplines' cross awareness of each other and by familiarizing them with their affect at the system level. Discipline engineers know their own discipline well, but typically are not intimately familiar with their technical interaction with and dependencies on all the other disciplines of engineering. These dependencies are design integration functions and are worked out well by the discipline engineers as long as they are involved in the design of types of systems that they have experience with.

'Unconventional' experiments in biology and medicine with optimized design based on quantum-like correlations.

PubMed

Beauvais, Francis

2017-02-01

In previous articles, a description of 'unconventional' experiments (e.g. in vitro or clinical studies based on high dilutions, 'memory of water' or homeopathy) using quantum-like probability was proposed. Because the mathematical formulations of quantum logic are frequently an obstacle for physicians and biologists, a modified modeling that rests on classical probability is described in the present article. This modeling is inspired from a relational interpretation of quantum physics that applies not only to microscopic objects, but also to macroscopic structures, including experimental devices and observers. In this framework, any outcome of an experiment is not an absolute property of the observed system as usually considered but is expressed relatively to an observer. A team of interacting observers is thus described from an external view point based on two principles: the outcomes of experiments are expressed relatively to each observer and the observers agree on outcomes when they interact with each other. If probability fluctuations are also taken into account, correlations between 'expected' and observed outcomes emerge. Moreover, quantum-like correlations are predicted in experiments with local blind design but not with centralized blind design. No assumption on 'memory' or other physical modification of water is necessary in the present description although such hypotheses cannot be formally discarded. In conclusion, a simple modeling of 'unconventional' experiments based on classical probability is now available and its predictions can be tested. The underlying concepts are sufficiently intuitive to be spread into the homeopathy community and beyond. It is hoped that this modeling will encourage new studies with optimized designs for in vitro experiments and clinical trials. Copyright © 2017 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

Small Laccase from "Streptomyces Coelicolor"--An Ideal Model Protein/Enzyme for Undergraduate Laboratory Experience

ERIC Educational Resources Information Center

Cook, Ryan; Hannon, Drew; Southard, Jonathan N.; Majumdar, Sudipta

2018-01-01

A one semester undergraduate biochemistry laboratory experience is described for an understanding of recombinant technology from gene cloning to protein characterization. An integrated experimental design includes three sequential modules: molecular cloning, protein expression and purification, and protein analysis and characterization. Students…

A Practical and Convenient Diffusion Apparatus: An Undergraduate Physical Chemistry Experiment.

ERIC Educational Resources Information Center

Clifford, Ben; Ochiai, E. I.

1980-01-01

Described is a diffusion apparatus to be used in an undergraduate physical chemistry laboratory experiment to determine the diffusion coefficients of aqueous solutions of sucrose and potassium dichromate. Included is the principle of the method, apparatus design and description, and experimental procedure. (Author/DS)

Enzyme Activity Experiments Using a Simple Spectrophotometer

ERIC Educational Resources Information Center

Hurlbut, Jeffrey A.; And Others

1977-01-01

Experimental procedures for studying enzyme activity using a Spectronic 20 spectrophotometer are described. The experiments demonstrate the effect of pH, temperature, and inhibitors on enzyme activity and allow the determination of Km, Vmax, and Kcat. These procedures are designed for teaching large lower-level biochemistry classes. (MR)

International Field Experiences Promote Professional Development for Sustainability Leaders

ERIC Educational Resources Information Center

Hull, R. Bruce; Kimmel, Courtney; Robertson, David P.; Mortimer, Michael

2016-01-01

Purpose: This paper aims to describe, explain and evaluate a graduate education program that provides international project experiences and builds competencies related to collaborative problem-solving, cultural capacity to work globally and sustainable development. Design/methodology/approach: Qualitative analysis of survey data from 28 students…

Burn Survivors' Perceptions regarding Relevant Sexual Education Strategies

ERIC Educational Resources Information Center

Parrott, Yolan; Esmail, Shaniff

2010-01-01

Purpose: This paper aims to investigate the unique issues childhood burn survivors experience in relation to sex education and sexual development. Design/methodology/approach: Using a phenomenological approach, participants described their lived experiences with regards to sex education and the sexuality issues they encountered as child burn…

Spacecraft and mission design for the SP-100 flight experiment

NASA Technical Reports Server (NTRS)

Deininger, William D.; Vondra, Robert J.

1988-01-01

The design and performance of a spacecraft employing arcjet nuclear electric propulsion, suitable for use in the SP-100 Space Reactor Power System (SRPS) Flight Experiment, are outlined. The vehicle design is based on a 93 kW(e) ammonia arcjet system operating at an experimentally measured specific impulse of 1031 s and an efficiency of 42.3 percent. The arcjet/gimbal assemblies, power conditioning subsystem, propellant feed system, propulsion system thermal control, spacecraft diagnostic instrumentation, and the telemetry requirements are described. A 100 kW(e) SRPS is assumed. The spacecraft mass is baselined at 5675 kg excluding the propellant and propellant feed system. Four mission scenarios are described which are capable of demonstrating the full capability of the SRPS. The missions considered include spacecraft deployment to possible surveillance platform orbits, a spacecraft storage mission, and an orbit raising round trip corresponding to possible orbit transfer vehicle (OTV) missions.

Space Shuttle Debris Impact Tool Assessment Using the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Rayos, Elonsio M.; Campbell, Charles H.; Rickman, Steven L.; Larsen, Curtis E.

2007-01-01

Complex computer codes are used to estimate thermal and structural reentry loads on the Shuttle Orbiter induced by ice and foam debris impact during ascent. Such debris can create cavities in the Shuttle Thermal Protection System. The sizes and shapes of these cavities are approximated to accommodate a code limitation that requires simple "shoebox" geometries to describe the cavities -- rectangular areas and planar walls that are at constant angles with respect to vertical. These approximations induce uncertainty in the code results. The Modern Design of Experiments (MDOE) has recently been applied to develop a series of resource-minimal computational experiments designed to generate low-order polynomial graduating functions to approximate the more complex underlying codes. These polynomial functions were then used to propagate cavity geometry errors to estimate the uncertainty they induce in the reentry load calculations performed by the underlying code. This paper describes a methodological study focused on evaluating the application of MDOE to future operational codes in a rapid and low-cost way to assess the effects of cavity geometry uncertainty.

Laser application to measure vertical sea temperature and turbidity, design phase

NASA Technical Reports Server (NTRS)

Hirschberg, J. G.; Wouters, A. W.; Simon, K. M.; Byrne, J. D.; Deverdun, C. E.

1976-01-01

An experiment to test a new method was designed, using backscattered radiation from a laser beam to measure oceanographic parameters in a fraction of a second. Tyndall, Rayleigh, Brillouin, and Raman scattering all are utilized to evaluate the parameters. A beam from a continuous argon ion laser is used together with an interferometer and interference filters to gather the information. The results are checked by direct measurements. Future shipboard and airborne experiments are described.

NASTRAN users' experience of Avco Aerostructures Division

NASA Technical Reports Server (NTRS)

Blackburn, C. L.; Wilhelm, C. A.

1973-01-01

The NASTRAN experiences of a major structural design and fabrication subcontractor that has less engineering personnel and computer facilities than those available to large prime contractors are discussed. Efforts to obtain sufficient computer capacity and the development and implementation of auxiliary programs to reduce manpower requirements are described. Applications of the NASTRAN program for training users, checking out auxiliary programs, performing in-house research and development, and structurally analyzing an Avco designed and manufactured missile case are presented.

Design, installation and operating experience of 20 photovoltaic medical refrigerator systems on four continents

NASA Technical Reports Server (NTRS)

Hein, G. F.

1982-01-01

The NASA Lewis Research Center in cooperation with the World Health Organization, U.S.A. I.D., the Pan American Health Organization and national government agencies in some developing countries sponsored the installation of twenty photovoltaic powered medical vaccine storage refrigerator-freezer (R/F) systems. The Solar Power Corporation was selected as the contractor to perform the design, development and installation of these twenty units. Solar Power's experiences are described herein.

JoVE: the Journal of Visualized Experiments.

PubMed

Vardell, Emily

2015-01-01

The Journal of Visualized Experiments (JoVE) is the world's first scientific video journal and is designed to communicate research and scientific methods in an innovative, intuitive way. JoVE includes a wide range of biomedical videos, from biology to immunology and bioengineering to clinical and translation medicine. This column describes the browsing and searching capabilities of JoVE, as well as its additional features (including the JoVE Scientific Education Database designed for students in scientific fields).

A Guide for Designing and Analyzing RNA-Seq Data.

PubMed

Chatterjee, Aniruddha; Ahn, Antonio; Rodger, Euan J; Stockwell, Peter A; Eccles, Michael R

2018-01-01

The identity of a cell or an organism is at least in part defined by its gene expression and therefore analyzing gene expression remains one of the most frequently performed experimental techniques in molecular biology. The development of the RNA-Sequencing (RNA-Seq) method allows an unprecedented opportunity to analyze expression of protein-coding, noncoding RNA and also de novo transcript assembly of a new species or organism. However, the planning and design of RNA-Seq experiments has important implications for addressing the desired biological question and maximizing the value of the data obtained. In addition, RNA-Seq generates a huge volume of data and accurate analysis of this data involves several different steps and choices of tools. This can be challenging and overwhelming, especially for bench scientists. In this chapter, we describe an entire workflow for performing RNA-Seq experiments. We describe critical aspects of wet lab experiments such as RNA isolation, library preparation and the initial design of an experiment. Further, we provide a step-by-step description of the bioinformatics workflow for different steps involved in RNA-Seq data analysis. This includes power calculations, setting up a computational environment, acquisition and processing of publicly available data if desired, quality control measures, preprocessing steps for the raw data, differential expression analysis, and data visualization. We particularly mention important considerations for each step to provide a guide for designing and analyzing RNA-Seq data.

Development of a microcomputer data base of manufacturing, installation, and operating experience for the NSSS designer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borchers, W.A.; Markowski, E.S.

1986-01-01

Future nuclear steam supply systems (NSSSs) will be designed in an environment of powerful micro hardware and software and these systems will be linked by local area networks (LAN). With such systems, individual NSSS designers and design groups will establish and maintain local data bases to replace existing manual files and data sources. One such effort of this type in Combustion Engineering's (C-E's) NSSS engineering organization is the establishment of a data base of historical manufacturing, installation, and operating experience to provide designers with information to improve on current designs and practices. In contrast to large mainframe or minicomputer datamore » bases, which compile industry-wide data, the data base described here is implemented on a microcomputer, is design specific, and contains a level of detail that is of interest to system and component designers. DBASE III, a popular microcomputer data base management software package, is used. In addition to the immediate benefits provided by the data base, the development itself provided a vehicle for identifying procedural and control aspects that need to be addressed in the environment of local microcomputer data bases. This paper describes the data base and provides some observations on the development, use, and control of local microcomputer data bases in a design organization.« less

Creating an Advertising Campaign: An Evaluation Report for the Occupational Exploration Programs.

ERIC Educational Resources Information Center

Altschuld, James W.; And Others

The evaluation report is one of seven produced for the Occupational Exploration Program (OEP), a series of simulated occupational experiences designed for junior high school students. Describing the pilot testing of the simulation dealing with advertising, the report contains sections describing the simulation context, evaluation procedures,…

Insurance: An Evaluation Report for the Occupational Exploration Program.

ERIC Educational Resources Information Center

Altschuld, James W.; And Others

The evaluation report is one of seven produced for the Occupational Exploration Program (OEP), a series of simulated occupational experiences designed for junior high school students. Describing the pilot testing of the simulation dealing with the insurance field, the report contains sections describing the simulation context, evaluation…

Planning Educational Programs: An Evaluation Report for the Occupational Exploration Program.

ERIC Educational Resources Information Center

Altschuld, James W.; Pritz, Sandra

The evaluation report is one of seven produced for the Occupational Exploration Program (OEP), a series of simulated occupational experiences designed for junior high school students. Describing the pilot testing of the simulation dealing with education, the report contains sections describing the simulation context, evaluation procedures,…

Anaesthesia at the District Hospital. Second Edition.

ERIC Educational Resources Information Center

Dobson, Michael B.

This practical manual is designed to help medical officers in small hospitals provide safe and effective anesthesia for patients. Intended for doctors with at least one year of postgraduate clinical experience, it describes anesthetic techniques suitable for use in hospitals with limited resources. Chapter 2 describes fundamental principles and…

An Apparatus for Growth of Small Crystals From Solutions.

ERIC Educational Resources Information Center

Mitrovic, Mico M.

1995-01-01

Describes an apparatus for crystal growth that was designed to study growth kinetics of small crystals from solutions and to obtain crystals of various substances. Describes the use of the apparatus in laboratory practical experiments in the field of crystal growth physics within the course "Solid State Physics". (JRH)

Manufacturing Production: An Evaluation Report for the Occupational Exploration Program.

ERIC Educational Resources Information Center

Altschuld, James W.; And Others

The evaluation report is one of seven produced for the Occupational Exploration Program (OEP), a series of simulated occupational experiences designed for junior high school students. Describing the pilot testing of the simulation dealing with manufacturing production, the report contains sections describing the simulation context, evaluation…

The Square Kilometre Array Epoch of Reionisation and Cosmic Dawn Experiment

NASA Astrophysics Data System (ADS)

Trott, Cathryn M.

2018-05-01

The Square Kilometre Array (SKA) Epoch of Reionisation and Cosmic Dawn (EoR/CD) experiments aim to explore the growth of structure and production of ionising radiation in the first billion years of the Universe. Here I describe the experiments planned for the future low-frequency components of the Observatory, and work underway to define, design and execute these programs.

Time Trials--An AP Physics Challenge Lab

ERIC Educational Resources Information Center

Jones, David

2009-01-01

I have come to the conclusion that for high school physics classroom and laboratory experiences, simpler is better! In this paper I describe a very simple and effective lab experience that my AP students have thoroughly enjoyed year after year. I call this lab exercise "Time Trials." The experiment is simple in design and it is a lot of fun for…

Using Modern Solid-State Analytical Tools for Investigations of an Advanced Carbon Capture Material: Experiments for the Inorganic Chemistry Laboratory

ERIC Educational Resources Information Center

Wriedt, Mario; Sculley, Julian P.; Aulakh, Darpandeep; Zhou, Hong-Cai

2016-01-01

A simple and straightforward synthesis of an ultrastable porous metal-organic framework (MOF) based on copper(II) and a mixed N donor ligand system is described as a laboratory experiment for chemistry undergraduate students. These experiments and the resulting analysis are designed to teach students basic research tools and procedures while…

A Physics Experiment Concerning the Measurement of the Torque of a Rotating Body Using a Magnetoelectrical Technique

ERIC Educational Resources Information Center

Sakon, Takuo; Nakagawa, Keisuke

2016-01-01

A physical experiment concerning the moment of inertia of a rigid disk is described. Basic physical quantities such as the moment of inertia and torque are very important in elementary physics courses. This experiment was designed to improve students' understanding of the relation between the rigid moment of inertia and torque. The moment of…

Second generation experiments in fault tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1987-01-01

The purpose of the Multi-Version Software (MVS) experiment is to obtain empirical measurements of the performance of multi-version systems. Twenty version of a program were prepared under reasonably realistic development conditions from the same specifications. The overall structure of the testing environment for the MVS experiment and its status are described. A preliminary version of the control system is described that was implemented for the MVS experiment to allow the experimenter to have control over the details of the testing. The results of an empirical study of error detection using self checks are also presented. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks.

psiTurk: An open-source framework for conducting replicable behavioral experiments online.

PubMed

Gureckis, Todd M; Martin, Jay; McDonnell, John; Rich, Alexander S; Markant, Doug; Coenen, Anna; Halpern, David; Hamrick, Jessica B; Chan, Patricia

2016-09-01

Online data collection has begun to revolutionize the behavioral sciences. However, conducting carefully controlled behavioral experiments online introduces a number of new of technical and scientific challenges. The project described in this paper, psiTurk, is an open-source platform which helps researchers develop experiment designs which can be conducted over the Internet. The tool primarily interfaces with Amazon's Mechanical Turk, a popular crowd-sourcing labor market. This paper describes the basic architecture of the system and introduces new users to the overall goals. psiTurk aims to reduce the technical hurdles for researchers developing online experiments while improving the transparency and collaborative nature of the behavioral sciences.

Making Associativity Operational

ERIC Educational Resources Information Center

Asghari, Amir H.; Khosroshahi, Leyla G.

2017-01-01

The purpose of this paper is to propose an "operational" idea for developing algebraic thinking in the absence of alphanumeric symbols. The paper reports on a design experiment encouraging preschool children to use the associative property algebraically. We describe the theoretical basis of the design, the tasks used, and examples of…

Design and Implementation Issues in Longitudinal Research

ERIC Educational Resources Information Center

Ludlow, Larry H.; Pedulla, Joseph; Reagan, Emile Mitescu; Enterline, Sarah; Cannady, Mac; Chappe, Stephanie

2011-01-01

To meet demands for accountability, most schools and departments of education at institutions of higher education (IHEs) gather information on their current students and graduates. This paper describes issues to consider when designing a longitudinal data collection and management system, drawing on seven years' experience developing such a…

High Reynolds Number Hybrid Laminar Flow Control (HLFC) Flight Experiment. 3; Leading Edge Design, Fabrication, and Installation

NASA Technical Reports Server (NTRS)

1999-01-01

This document describes the design, fabrication, and installation of the suction panel and the required support structure, ducting, valving, and high-lift system (Krueger flaps) for flight demonstration of hybrid laminar flow control on the Boeing 757 airplane.

Experiences of CNES and SEP on space mechanisms rotating at low speed

NASA Technical Reports Server (NTRS)

Atlas, G.; Thomin, G.

1987-01-01

Some aspects of knowledge acquired in the field of space mechanisms by Societe Europeenne de Propulsion and Centre National d'Etudes Spatiales in International and French National space programs are described. The experience described centers on the development of these programs: The MEGS (Mechanisme d'Etrainement du Generateur Solaire), and the MOGS (Mechanisme d'Orientation de Generateur Solaire), both solar array drive mechanisms. Key design areas and the mechanism performance obtained are highlighted. Some test problems with the MEGS sliprings are discussed.

Designing a connectionist network supercomputer.

PubMed

Asanović, K; Beck, J; Feldman, J; Morgan, N; Wawrzynek, J

1993-12-01

This paper describes an effort at UC Berkeley and the International Computer Science Institute to develop a supercomputer for artificial neural network applications. Our perspective has been strongly influenced by earlier experiences with the construction and use of a simpler machine. In particular, we have observed Amdahl's Law in action in our designs and those of others. These observations inspire attention to many factors beyond fast multiply-accumulate arithmetic. We describe a number of these factors along with rough expressions for their influence and then give the applications targets, machine goals and the system architecture for the machine we are currently designing.

Apollo experience report: Command and service module communications subsystem

NASA Technical Reports Server (NTRS)

Lattier, E. E., Jr.

1974-01-01

The development of spacecraft communications hardware from design to operation is described. Programs, requirements, specifications, and design approaches for a variety of functions (such as voice, telemetry, television, and antennas) are reviewed. Equipment environmental problems such as vibration, extreme temperature variation, and zero gravity are discussed. A review of the development of managerial techniques used in refining the roles of prime and subcontractors is included. The hardware test program is described in detail as it progressed from breadboard design to manned flight system evaluations. Finally, a series of actions is recommended to managers of similar projects to facilitate administration.

Space station definitions, design, and development. Task 5: Multiple arm telerobot coordination and control: Manipulator design methodology

NASA Technical Reports Server (NTRS)

Stoughton, R. M.

1990-01-01

A proposed methodology applicable to the design of manipulator systems is described. The current design process is especially weak in the preliminary design phase, since there is no accepted measure to be used in trading off different options available for the various subsystems. The design process described uses Cartesian End-Effector Impedance as a measure of performance for the system. Having this measure of performance, it is shown how it may be used to determine the trade-offs necessary to the preliminary design phase. The design process involves three main parts: (1) determination of desired system performance in terms of End-Effector Impedance; (2) trade-off design options to achieve this desired performance; and (3) verification of system performance through laboratory testing. The design process is developed using numerous examples and experiments to demonstrate the feasability of this approach to manipulator design.

Lost in space: design of experiments and scientific exploration in a Hogarth Universe.

PubMed

Lendrem, Dennis W; Lendrem, B Clare; Woods, David; Rowland-Jones, Ruth; Burke, Matthew; Chatfield, Marion; Isaacs, John D; Owen, Martin R

2015-11-01

A Hogarth, or 'wicked', universe is an irregular environment generating data to support erroneous beliefs. Here, we argue that development scientists often work in such a universe. We demonstrate that exploring these multidimensional spaces using small experiments guided by scientific intuition alone, gives rise to an illusion of validity and a misplaced confidence in that scientific intuition. By contrast, design of experiments (DOE) permits the efficient mapping of such complex, multidimensional spaces. We describe simulation tools that enable research scientists to explore these spaces in relative safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

Economy of middeck payloads

NASA Technical Reports Server (NTRS)

Michel, E. L.; Huffstetler, W. J.

1986-01-01

The utilization of the middeck, designed as the crew quarters, for experiments is examined. The dimensions of the middeck's standard lockers, double lockers, adapter plates, and the galley, which are applicable for experiments, are described. The utilities available for middeck payloads include ac and dc electrical power supply, active and passive cooling, vacuum/vent line connections, and data handling, and four basic payload configurations are possible. The development of a middeck accommodations rack to make payload space more flexible and to enable an optimum number and variety of experiments to be flown is proposed. Diagrams of the orbiter's middeck and experimental designs are provided.

Physiology of chimpanzees in orbit. Part 2: Interface document

NASA Technical Reports Server (NTRS)

Firstenberg, A.

1972-01-01

Interface requirements are presented for the design and development of an earth orbiting experiment to be known as POCO, Physiology of Chimpanzees in Orbit. The POCO experiment may be designed to operate within an orbiting space station (provided artificial gravity measures are not employed), a Saturn 4-B workshop, an Apollo command module or service module, a Saturn-1B spacecraft LM adapter, or aboard one of the presently conceived appendages connected by an umbilical to a space station. This document sets forth the experiment definition and requirements and describes the hardware under development to accomplish these objectives.

Interim Service ISDN Satellite (ISIS) hardware experiment development for advanced ISDN satellite designs and experiments

NASA Technical Reports Server (NTRS)

Pepin, Gerard R.

1992-01-01

The Interim Service Integrated Service Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Development for Advanced Satellite Designs describes the development of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into Time Division Multiple Access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the RS-499 interface for satellite uplink. The same ISTA converts in the opposite direction the RS-499 to U-interface data with a simple switch setting.

The impact of user- and system-initiated personalization on the user experience at large sports events.

PubMed

Sun, Xu; May, Andrew; Wang, Qingfeng

2016-05-01

This article describes an experimental study investigating the impact on user experience of two approaches of personalization of content provided on a mobile device, for spectators at large sports events. A lab-based experiment showed that a system-driven approach to personalization was generally preferable, but that there were advantages to retaining some user control over the process. Usability implications for a hybrid approach, and design implications are discussed, with general support for countermeasures designed to overcome recognised limitations of adaptive systems. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Alpha LAMP Integration Facility

NASA Technical Reports Server (NTRS)

Oshiro, Richard; Sowers, Dennis; Gargiulo, Joe; Mcgahey, Mark

1994-01-01

This paper describes the activity recently completed to meet the simulated space environment requirements for the ground-based testing of an integrated Space Based Laser (SBL) system experiment. The need to maintain optical alignment in the challenging dynamic environment of the pressure recovery system required to simulate space dominated the design requirements. A robust system design was established which minimized the total program costs, most notably by reducing the cost of integrating the components of the experiment. The components of the experiment are integrated on an optical bench in a clean area adjacent to the vacuum chamber and moved on air bearings into the chamber for testing.

Experiment module concepts study. Volume 3: Module and subsystem design

NASA Technical Reports Server (NTRS)

Hunter, J. R.; Chiarappa, D. J.

1970-01-01

The final common module set exhibiting wide commonality is described. The set consists of three types of modules: one free flying module and two modules that operate attached to the space station. The common module designs provide for the experiment program as defined. The feasibility, economy, and practicality of these modules hinges on factors that do not affect the approach or results of the commonality process, but are important to the validity of the common module concepts. Implementation of the total experiment program requires thirteen common modules: five CM-1, five CM-3, and three CM-4 modules.

The Value of Interrupted Time-Series Experiments for Community Intervention Research

PubMed Central

Biglan, Anthony; Ary, Dennis; Wagenaar, Alexander C.

2015-01-01

Greater use of interrupted time-series experiments is advocated for community intervention research. Time-series designs enable the development of knowledge about the effects of community interventions and policies in circumstances in which randomized controlled trials are too expensive, premature, or simply impractical. The multiple baseline time-series design typically involves two or more communities that are repeatedly assessed, with the intervention introduced into one community at a time. It is particularly well suited to initial evaluations of community interventions and the refinement of those interventions. This paper describes the main features of multiple baseline designs and related repeated-measures time-series experiments, discusses the threats to internal validity in multiple baseline designs, and outlines techniques for statistical analyses of time-series data. Examples are given of the use of multiple baseline designs in evaluating community interventions and policy changes. PMID:11507793

Incidental Becomes Visible: A Comparison of School- and Community-Based Field Experience Narratives

ERIC Educational Resources Information Center

Holder, K. C.; Downey, Jayne A.

2008-01-01

The purpose of this study was to describe and compare student learning documented using written field experience summary narratives and occurring in community-based or school-based locations. Utilizing a hybrid portraiture--instrumental case study design, two researchers selected participants from undergraduate educational psychology courses using…

Fiber Optic Wink-around Speed of Light Experiment.

ERIC Educational Resources Information Center

Blackburn, James A.

1980-01-01

Describes an experiment in which a recycling oscillator has been designed having a fiber optic data link that closes the loop. Outlines the use of this wink-around system to determine the speed of light and suggests additional application for measuring integrated circuit propagation delays to subnanosecond resolution. (GS)

Improving Intercultural Education at Chinese Institutions from German Experience

ERIC Educational Resources Information Center

Huang, Lihe

2015-01-01

In this reflection paper, Lihe Huang describes his experience studying abroad in Germany as a visiting scholar. Through the well-designed introductory seminar and study tour arranged by the Alexander von Humboldt Foundation, which provided the grant for Huang's research on foreign languages teaching and intercultural education in Germany, he…

A Qualitative Phenomenological Exploration of Teachers' Experience with Nutrition Education

ERIC Educational Resources Information Center

Hall, Elisha; Chai, Weiwen; Albrecht, Julie A.

2016-01-01

Background: Nutrition education delivered by classroom teachers has become a popular intervention designed to combat childhood obesity. However, few qualitative studies have explored nutrition education with teachers Purpose: The purpose of this study was to explore how elementary teachers describe their experience with nutrition education.…

Relational Aggression: The Voices of Primary School Learners

ERIC Educational Resources Information Center

Botha, Johan

2014-01-01

The aim of this research was to explore and describe primary school learners' experiences of relational aggression at school. This was done within a qualitative research design with a phenomenological approach. In order to give a voice to primary school learners' lived experiences of relational aggression, 25 individual interviews were conducted…

Introducing the Wittig Reaction.

ERIC Educational Resources Information Center

Armstead, D. E. F.

1979-01-01

An experiment is described which provides a simple example of the application of the Wittig reaction to the synthesis of unsaturated compounds. The experiment was designed with British HNC chemistry students in mind, but it is also suitable as a project-type exercise for final year GCE A-level students. (Author/BB)

Using VITA Service Learning Experiences to Teach Hypothesis Testing and P-Value Analysis

ERIC Educational Resources Information Center

Drougas, Anne; Harrington, Steve

2011-01-01

This paper describes a hypothesis testing project designed to capture student interest and stimulate classroom interaction and communication. Using an online survey instrument, the authors collected student demographic information and data regarding university service learning experiences. Introductory statistics students performed a series of…

Developing a Short-Term, Faculty-Led Sports Medicine Study Abroad Experience

ERIC Educational Resources Information Center

Jutte, Lisa S.

2011-01-01

Context: While sports medicine study abroad opportunities have recently increased, the literature regarding their development is non-existent in athletic training education literature and very limited in general education literature. Objective: The purpose of this manuscript is to draw upon my experience to describe the essential design elements…

Dimensions of a Planet.

ERIC Educational Resources Information Center

Hayward, O. T.; And Others

This publication is one of a series of single-topic problem modules designed for use in undergraduate geology and earth science courses. The first section, "Ain't It Flat? A Series of Experiments in Geodesy," presents various experiments for determining the earth's circumference (historically) and describes the use of satellites in determining the…

The Determination of the Stereochemistry of Erythro-1,2-Diphenyl-1,2-Ethanediol: An Undergraduate Organic Experiment.

ERIC Educational Resources Information Center

Rowland, Alex T.

1983-01-01

Describes an undergraduate organic chemistry experiment designed to illustrate the power of nuclear magnetic reasonance spectroscopy in a determination of the configurations at centers of chirality of various isomers of acyclic systems. Provides a background discussion and experimental procedure. (JM)

Experience API: Flexible, Decentralized and Activity-Centric Data Collection

ERIC Educational Resources Information Center

Kevan, Jonathan M.; Ryan, Paul R.

2016-01-01

This emerging technology report describes the Experience API (xAPI), a new e-learning specification designed to support the learning community in standardizing and collecting both formal and informal distributed learning activities. Informed by Activity Theory, a framework aligned with constructivism, data is collected in the form of activity…

Dolls, Blocks, and Puzzles: Playing with Mathematical Understandings

ERIC Educational Resources Information Center

Eisenhauer, Mary Jane; Feikes, David

2009-01-01

This article describes a learning experience designed for teachers of children in primary classrooms (K-3) who are taking graduate courses. The learning experience offers new insights into the different ways young children encounter math in their natural, playful environment. Through a hands-on workshop approach, the students engaged in firsthand…

The Impact of Peer Mentoring on Marketing Content Mastery

ERIC Educational Resources Information Center

Metcalf, Lynn E.; Neill, Stern; Simon, Lisa R.; Dobson, Sharon; Davis, Brennan

2016-01-01

This article describes and assesses a course design that uses peer mentors to facilitate a collaborative, hands-on learning experience in an introductory marketing course. Results demonstrate that peer mentoring increased content mastery and had a positive effect on students' perceptions of the learning experience. Peer marketing mentors, along…

Use of a Simple, Colorimetric Assay to Demonstrate Conditions for Induction of Nitrate Reductase in Plants.

ERIC Educational Resources Information Center

Harley, Suzanne M.

1993-01-01

Nitrate assimilation by plants provides an excellent system for demonstrating control of gene expression in a eukaryotic organism. Describes an assay method that allows students to complete experiments designed around the measurement of nitrate reductase within a three-hour laboratory experiment. (PR)

It's Alive!: Students Observe Air-Water Interface Samples Rich with Organisms

ERIC Educational Resources Information Center

Avant, Thomas

2002-01-01

This article describes an experiment, designed by Cindy Henk, manager of the Socolofsky Microscopy Center at Louisiana State University (LSU), that involved collecting and viewing microorganisms in the air-water interface. The experiment was participated by Leesville High School microbiology students. The students found that the air-water…

An Experiment in Comparative Advantage.

ERIC Educational Resources Information Center

Haupert, Michael J.

1996-01-01

Describes an undergraduate economics course experiment designed to teach the concepts of comparative advantage and opportunity costs. Students have a limited number of labor hours and can chose to produce either wheat or steel. As the project progresses, the students trade commodities in an attempt to maximize use of their labor hours. (MJP)

Choosing Partners: A Classroom Experiment

ERIC Educational Resources Information Center

Bergstrom, Carl T.; Bergstrom, Theodore C.; Garratt, Rodney J.

2013-01-01

The authors describe a classroom experiment designed to present the idea of two-sided matching, the concept of a stable assignment, and the Gale-Shapley deferred-acceptance mechanism. Participants need no prior training in economics or game theory, but the exercise will also interest trained economists and game theorists. (Contains 5 tables, 2…

"Virtual" Experiment for Understanding the Electrocardiogram and the Mean Electrical Axis.

ERIC Educational Resources Information Center

Anderson, Jamie; DiCarlo, Stephen E.

2000-01-01

Describes a virtual experiment designed to introduce students to the theory and application of the electrocardiogram (ECG) and the mean electrical axis (MEA). Students are asked to reduce and analyze data, calculate and plot the MEA, and answer questions in the inquiry-based, experimental activity. (Author/WRM)

Student Teachers' Lived Experiences with Their Cooperating Teacher: A Phenomenological Study

ERIC Educational Resources Information Center

Salazar, Donna

2017-01-01

Purpose: The purpose of this phenomenological study was to understand and systematically describe the essence of the relationship and learning experiences between student teachers and their cooperating teacher during their clinical fieldwork in two school districts in southern California. Methodology: A phenomenological design was used to explore…

Healthy work environments for the ageing nursing workforce.

PubMed

Stichler, Jaynelle F

2013-10-01

The aim of this article is to describe the physical challenges that ageing nurses experience and the facility design features that can promote healthy work environments to motivate nurses to continue working. Older nurses are working longer and beyond the usual retirement age. They often experience chronic fatigue and the usual physical and cognitive changes associated with aging. Nursing is a physically demanding profession and many older nurses work in pain while providing direct patient care. The literature is replete with studies focusing on the organisational factors that retain older nurses, but little research addresses design factors that facilitate nurses working longer and more safely in direct patient care. Electronic databases in medicine, nursing, psychology, and architecture were searched and evidence-based, non-evidence-based, and review articles and government and organisational newsletters were evaluated. Hospital design can help address the physical work challenges that older nurses experience. Older nurses have a wealth of knowledge and expertise, and the design of nursing units can optimize their work experience. Nurse Managers must participate in design efforts and advocate designs that support aging nurses. © 2013 John Wiley & Sons Ltd.

Endwall flows and blading design for axial flow compressors

NASA Astrophysics Data System (ADS)

Robinson, Christopher J.

Literature relevant to blading design in the endwall region is reviewed, and important three dimensional flow phenomena occurring in embedded stages of axial compressors are described. A low speed axial flow four stage compressor rig is described and bladings studied are detailed: two conventional and two with end bends. The application of a three dimensional Navier-Stokes solver to the bladings' stators, to assess the effectiveness of the code, is reported. Calculation results of exit whirl angles, losses, and surface static pressures are compared with experiment.

The Emergency Landing Planner Experiment

NASA Technical Reports Server (NTRS)

Meuleau, Nocolas F.; Neukom, Christian; Plaunt, Christian John; Smith, David E.; Smith, Tristan B.

2011-01-01

In previous work, we described an Emergency Landing Planner (ELP) designed to assist pilots in choosing the best emergency landing site when damage or failures occur in an aircraft. In this paper, we briefly describe the system, but focus on the integration of this system into the cockpit of a 6 DOF full-motion simulator and a study designed to evaluate the ELP. We discuss the results of this study, the lessons learned, and some of the issues involved in advancing this work further.

Toward the First Data Acquisition Standard in Synthetic Biology.

PubMed

Sainz de Murieta, Iñaki; Bultelle, Matthieu; Kitney, Richard I

2016-08-19

This paper describes the development of a new data acquisition standard for synthetic biology. This comprises the creation of a methodology that is designed to capture all the data, metadata, and protocol information associated with biopart characterization experiments. The new standard, called DICOM-SB, is based on the highly successful Digital Imaging and Communications in Medicine (DICOM) standard in medicine. A data model is described which has been specifically developed for synthetic biology. The model is a modular, extensible data model for the experimental process, which can optimize data storage for large amounts of data. DICOM-SB also includes services orientated toward the automatic exchange of data and information between modalities and repositories. DICOM-SB has been developed in the context of systematic design in synthetic biology, which is based on the engineering principles of modularity, standardization, and characterization. The systematic design approach utilizes the design, build, test, and learn design cycle paradigm. DICOM-SB has been designed to be compatible with and complementary to other standards in synthetic biology, including SBOL. In this regard, the software provides effective interoperability. The new standard has been tested by experiments and data exchange between Nanyang Technological University in Singapore and Imperial College London.

Selecting the best design for nonstandard toxicology experiments.

PubMed

Webb, Jennifer M; Smucker, Byran J; Bailer, A John

2014-10-01

Although many experiments in environmental toxicology use standard statistical experimental designs, there are situations that arise where no such standard design is natural or applicable because of logistical constraints. For example, the layout of a laboratory may suggest that each shelf serve as a block, with the number of experimental units per shelf either greater than or less than the number of treatments in a way that precludes the use of a typical block design. In such cases, an effective and powerful alternative is to employ optimal experimental design principles, a strategy that produces designs with precise statistical estimates. Here, a D-optimal design was generated for an experiment in environmental toxicology that has 2 factors, 16 treatments, and constraints similar to those described above. After initial consideration of a randomized complete block design and an intuitive cyclic design, it was decided to compare a D-optimal design and a slightly more complicated version of the cyclic design. Simulations were conducted generating random responses under a variety of scenarios that reflect conditions motivated by a similar toxicology study, and the designs were evaluated via D-efficiency as well as by a power analysis. The cyclic design performed well compared to the D-optimal design. © 2014 SETAC.

Redesigning Vocational Education: The Possibilities of Design-Based Research

ERIC Educational Resources Information Center

Leeman, Yvonne; Wardekker, Willem

2011-01-01

This article describes and reflects our experiences as researchers in a design-based research project on a curriculum innovation focused on meaningful, co-operative learning in vocational education in the Netherlands. The project was successful in gaining insights in possible practices for workplace learning but did only partly realize the…

Teaching Quality Object-Oriented Programming

ERIC Educational Resources Information Center

Feldman, Yishai A.

2005-01-01

Computer science students need to learn how to write high-quality software. An important methodology for achieving quality is design-by-contract, in which code is developed together with its specification, which is given as class invariants and method pre- and postconditions. This paper describes practical experience in teaching design-by-contract…

Value Co-Creation through Learning Styles Segmentation and Integrated Course Design

ERIC Educational Resources Information Center

Young, Mark; Collins, Marianne K.

2014-01-01

This paper describes an innovative Principles of Marketing course design and delivery which matches learning and teaching styles, while reducing multi-section variation. Value co-creation is encouraged by instructors and students collaborating in the creation of customized learning experiences which facilitates both teaching style and learning…

Architecture for Education: New School Designs from the Chicago Competition.

ERIC Educational Resources Information Center

Robbins, Mark; Moelis, Cindy S.; Clarke, Pamela H.; Hendrickson, Jamie; Nowaczewski, Jeanne L.; Haar, Sharon

This volume documents the work that resulted from the Chicago Public Schools Design Competition, explaining research and policies underlying the competition's criteria. The volume has three parts. Book 1, "The Chicago Experience," written by the competition's organizers, describes the competition's process and explains how it allowed community…

Nematodes: Model Organisms in High School Biology

ERIC Educational Resources Information Center

Bliss, TJ; Anderson, Margery; Dillman, Adler; Yourick, Debra; Jett, Marti; Adams, Byron J.; Russell, RevaBeth

2007-01-01

In a collaborative effort between university researchers and high school science teachers, an inquiry-based laboratory module was designed using two species of insecticidal nematodes to help students apply scientific inquiry and elements of thoughtful experimental design. The learning experience and model are described in this article. (Contains 4…

Aeronautics Study Takes Off! Glider Design for Beginners

ERIC Educational Resources Information Center

Lazaros, Edward J.; Carlson, Katie

2008-01-01

Study of aeronautics is an interesting and motivating subject for students and educators alike. The activity described in this article--appropriate for upper elementary or middle school students--provides an excellent introduction to airplane design and the science of aerodynamics. It also gives students good experience applying knowledge from a…

The Community Mental Health Center as a Matrix Organization.

ERIC Educational Resources Information Center

White, Stephen L.

1978-01-01

This article briefly reviews the literature on matrix organizational designs and discusses the ways in which the matrix design might be applied to the special features of a community mental health center. The phases of one community mental health center's experience in adopting a matrix organizational structure are described. (Author)

Pulsed Energy Systems for Generating Plasmas

NASA Technical Reports Server (NTRS)

Rose, M. Franklin; Shotts, Z.

2005-01-01

This paper will describe the techniques needed to electrically generate highly ionized dense plasmas for a variety of applications. The components needed in pulsed circuits are described in terms of general performance parameters currently available from commercial vendors. Examples of pulsed systems using these components are described and technical data from laboratory experiments presented. Experimental data are given for point designs, capable of multi-megawatt power levels.

Laser program annual report, 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, L.W.; Krupke, W.F.; Strack, J.R.

1981-06-01

Volume 2 contains five sections that cover the areas of target design, target fabrication, diagnostics, and fusion experiments. Section 3 reports on target design activities, plasma theory and simulation, code development, and atomic theory. Section 4 presents the accomplishments of the Target Fabrication Group, Section 5 contains the results of our diagnostics development, and Section 6 describes advances made in the management and analysis of experimental data. Finally, Section 7 in Volume 2 reports the results of laser target experiments conducted during the year.

Implementation of Hydrodynamic Simulation Code in Shock Experiment Design for Alkali Metals

NASA Astrophysics Data System (ADS)

Coleman, A. L.; Briggs, R.; Gorman, M. G.; Ali, S.; Lazicki, A.; Swift, D. C.; Stubley, P. G.; McBride, E. E.; Collins, G.; Wark, J. S.; McMahon, M. I.

2017-10-01

Shock compression techniques enable the investigation of extreme P-T states. In order to probe off-Hugoniot regions of P-T space, target makeup and laser pulse parameters must be carefully designed. HYADES is a hydrodynamic simulation code which has been successfully utilised to simulate shock compression events and refine the experimental parameters required in order to explore new P-T states in alkali metals. Here we describe simulations and experiments on potassium, along with the techniques required to access off-Hugoniot states.

Experiments for Ka-band mobile applications: The ACTS mobile terminal

NASA Technical Reports Server (NTRS)

Estabrook, Polly; Dessouky, Khaled; Jedrey, Thomas

1990-01-01

To explore the potential of Ka-band to support mobile satellite services, the Jet Propulsion Laboratory (JPL) has initiated the design and development of a Ka-band land-mobile terminal to be used with the Advanced Communications Technology Satellite (ACTS). The planned experimental setup with ACTS is described. Brief functional descriptions of the mobile and fixed terminals are provided. The inputs required from the propagation community to support the design activities and the planned experiments are also discussed.

Automated Space Processing Payloads Study. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1975-01-01

An investigation is described which examined the extent to which the experiment hardware and operational requirements can be met by automatic control and material handling devices; payload and system concepts are defined which make extensive use of automation technology. Topics covered include experiment requirements and hardware data, capabilities and characteristics of industrial automation equipment and controls, payload grouping, automated payload conceptual design, space processing payload preliminary design, automated space processing payloads for early shuttle missions, and cost and scheduling.

Phase 1 of the First Small Power System Experiment (engineering Experiment No. 1). Volume 4: Commercial System Definition. [development and testing of a solar thermal power plant

NASA Technical Reports Server (NTRS)

Holl, R. J.

1979-01-01

The development and design of a modular solar thermal power system for application in the 1 to 10 MWe range is described. The system is used in remote utility applications, small communities, rural areas, and for industrial uses. The operational reliability, the minimum risk of failure, and the maintenance and repair characteristics are determined and the commercial system design is defined.

Skylab experiments. Volume 7: Living and working in space. [Skylab mission data on human factors engineering and spacecraft components for high school level education

NASA Technical Reports Server (NTRS)

1973-01-01

Experiments conducted on the Skylab vehicle that will measure and evaluate the ability of the crew to live and work effectively in space are discussed. The methods and techniques of human engineering as they relate to the design and evaluation of work spaces, requirements, and tools are described. The application of these methods and the Skylab measurements to the design of future spacecraft are analyzed.

AMPS data management concepts. [Atmospheric, Magnetospheric and Plasma in Space experiment

NASA Technical Reports Server (NTRS)

Metzelaar, P. N.

1975-01-01

Five typical AMPS experiments were formulated to allow simulation studies to verify data management concepts. Design studies were conducted to analyze these experiments in terms of the applicable procedures, data processing and displaying functions. Design concepts for AMPS data management system are presented which permit both automatic repetitive measurement sequences and experimenter-controlled step-by-step procedures. Extensive use is made of a cathode ray tube display, the experimenters' alphanumeric keyboard, and the computer. The types of computer software required by the system and the possible choices of control and display procedures available to the experimenter are described for several examples. An electromagnetic wave transmission experiment illustrates the methods used to analyze data processing requirements.

Studies for the electro-magnetic calorimeter SplitCal for the SHiP experiment at CERN with shower direction reconstruction capability

NASA Astrophysics Data System (ADS)

Bonivento, Walter M.

2018-02-01

This paper describes the basic ideas and the first simulation results of a new electro-magnetic calorimeter concept, named SplitCal, aimed at optimising the measurement of photon direction in fixed-target experiment configuration, with high photon detection efficiency. This calorimeter was designed for the invariant mass reconstruction of axion-like particles decaying into two photons in the mass range 200 MeV to 1 GeV for the proposed proton beam dump experiment SHiP at CERN. Preliminary results indicate that angular resolutions better than obtained by past experiments can be achieved with this design. An implementation of this concept with real technologies is under study.

Teaching examples for the design of experiments: geographical sensitivity and the self-fulfilling prophecy.

PubMed

Lendrem, Dennis W; Lendrem, B Clare; Rowland-Jones, Ruth; D'Agostino, Fabio; Linsley, Matt; Owen, Martin R; Isaacs, John D

2016-01-01

Many scientists believe that small experiments, guided by scientific intuition, are simpler and more efficient than design of experiments. This belief is strong and persists even in the face of data demonstrating that it is clearly wrong. In this paper, we present two powerful teaching examples illustrating the dangers of small experiments guided by scientific intuition. We describe two, simple, two-dimensional spaces. These two spaces give rise to, and at the same time appear to generate supporting data for, scientific intuitions that are deeply flawed or wholly incorrect. We find these spaces useful in unfreezing scientific thinking and challenging the misplaced confidence in scientific intuition. Copyright © 2015 John Wiley & Sons, Ltd.

Software fault-tolerance by design diversity DEDIX: A tool for experiments

NASA Technical Reports Server (NTRS)

Avizienis, A.; Gunningberg, P.; Kelly, J. P. J.; Lyu, R. T.; Strigini, L.; Traverse, P. J.; Tso, K. S.; Voges, U.

1986-01-01

The use of multiple versions of a computer program, independently designed from a common specification, to reduce the effects of an error is discussed. If these versions are designed by independent programming teams, it is expected that a fault in one version will not have the same behavior as any fault in the other versions. Since the errors in the output of the versions are different and uncorrelated, it is possible to run the versions concurrently, cross-check their results at prespecified points, and mask errors. A DEsign DIversity eXperiments (DEDIX) testbed was implemented to study the influence of common mode errors which can result in a failure of the entire system. The layered design of DEDIX and its decision algorithm are described.

Extended experience and modifications in the design and concepts of the keystone design island flap.

PubMed

Moncrieff, Marc D; Thompson, John F; Stretch, Jonathan R

2010-08-01

This paper describes modifications to the design of the keystone design island flap for the reconstruction of oncological defects. In particular, the paper outlines a spectrum of modifications to the design that permit the design to be tailored to a broad range of reconstructive needs, factoring in the anatomical location of the soft tissue defect and the quality of the integument in that locality. The biomechanics of the flap are also discussed in detail. Copyright 2009. Published by Elsevier Ltd.

Using Dedal to share and reuse distributed engineering design information

NASA Technical Reports Server (NTRS)

Baya, Vinod; Baudin, Catherine; Mabogunje, Ade; Das, Aseem; Cannon, David M.; Leifer, Larry J.

1994-01-01

The overall goal of the project is to facilitate the reuse of previous design experience for the maintenance, repair and redesign of artifacts in the electromechanical engineering domain. An engineering team creates information in the form of meeting summaries, project memos, progress reports, engineering notes, spreadsheet calculations and CAD drawings. Design information captured in these media is difficult to reuse because the way design concepts are referred to evolve over the life of a project and because decisions, requirements and structure are interrelated but rarely explicitly linked. Based on protocol analysis of the information seeking behavior of designer's, we defined a language to describe the content and the form of design records and implemented this language in Dedal, a tool for indexing, modeling and retrieving design information. We first describe the approach to indexing and retrieval in Dedal. Next we describe ongoing work in extending Dedal's capabilities to a distributed environment by integrating it with World Wide Web. This will enable members of a design team who are not co-located to share and reuse information.

Developments in the safe design of LNG tanks

NASA Astrophysics Data System (ADS)

Fulford, N. J.; Slatter, M. D.

The objective of this paper is to discuss how the gradual development of design concepts for liquefied natural gas (LNG) storage systems has helped to enhance storage safety and economy. The experience in the UK is compared with practice in other countries with similar LNG storage requirements. Emphasis is placed on the excellent record of safety and reliability exhibited by tanks with a primary metal container designed and constructed to approved standards. The work carried out to promote the development of new materials, fire protection, and monitoring systems for use in LNG storage is also summarized, and specific examples described from British Gas experience. Finally, the trends in storage tank design world-wide and options for future design concepts are discussed, bearing in mind planned legislation and design codes governing hazardous installations.

The Psychology Experiment Building Language (PEBL) and PEBL Test Battery.

PubMed

Mueller, Shane T; Piper, Brian J

2014-01-30

We briefly describe the Psychology Experiment Building Language (PEBL), an open source software system for designing and running psychological experiments. We describe the PEBL Test Battery, a set of approximately 70 behavioral tests which can be freely used, shared, and modified. Included is a comprehensive set of past research upon which tests in the battery are based. We report the results of benchmark tests that establish the timing precision of PEBL. We consider alternatives to the PEBL system and battery tests. We conclude with a discussion of the ethical factors involved in the open source testing movement. Copyright © 2013 Elsevier B.V. All rights reserved.

The Psychology Experiment Building Language (PEBL) and PEBL Test Battery

PubMed Central

Mueller, Shane T.; Piper, Brian J.

2014-01-01

Background We briefly describe the Psychology Experiment Building Language (PEBL), an open source software system for designing and running psychological experiments. New Method We describe the PEBL test battery, a set of approximately 70 behavioral tests which can be freely used, shared, and modified. Included is a comprehensive set of past research upon which tests in the battery are based. Results We report the results of benchmark tests that establish the timing precision of PEBL. Comparison with Existing Method We consider alternatives to the PEBL system and battery tests. Conclusions We conclude with a discussion of the ethical factors involved in the open source testing movement. PMID:24269254

A landmark recognition and tracking experiment for flight on the Shuttle/Advanced Technology Laboratory (ATL)

NASA Technical Reports Server (NTRS)

Welch, J. D.

1975-01-01

The preliminary design of an experiment for landmark recognition and tracking from the Shuttle/Advanced Technology Laboratory is described. It makes use of parallel coherent optical processing to perform correlation tests between landmarks observed passively with a telescope and previously made holographic matched filters. The experimental equipment including the optics, the low power laser, the random access file of matched filters and the electro-optical readout device are described. A real time optically excited liquid crystal device is recommended for performing the input non-coherent optical to coherent optical interface function. A development program leading to a flight experiment in 1981 is outlined.

Grief and Personal Growth Experience of Spouses and Adult-Child Caregivers of Individuals with Alzheimer's Disease and Related Dementias

ERIC Educational Resources Information Center

Ott, Carol H.; Sanders, Sara; Kelber, Sheryl T.

2007-01-01

Purpose: The purpose of this study was to describe the grief and personal growth experience of spouses and adult children of individuals with Alzheimer's disease and related dementias and the factors contributing to these experiences. Design and Methods: We used a modification of the Marwit-Meuser-Sanders Caregiver Grief model to examine the…

Recent Darrieus vertical axis wind turbine aerodynamical experiments at Sandia National Laboratories

NASA Technical Reports Server (NTRS)

Klimas, P. C.

1981-01-01

Experiments contributing to the understanding of the aerodynamics of airfoils operating in the vertical axis wind turbine (VAWT) environment are described. These experiments are ultimately intended to reduce VAWT cost of energy and increase system reliability. They include chordwise pressure surveys, circumferential blade acceleration surveys, effects of blade camber, pitch and offset, blade blowing, and use of sections designed specifically for VAWT application.

Skylab

NASA Image and Video Library

1972-01-01

This photograph describes details of the telescopic camera for ultraviolet star photography for Skylab's Ultraviolet Panorama experiment (S183) placed in the Skylab airlock. The S183 experiment was designed to obtain ultraviolet photographs at three wavelengths of hot stars, clusters of stars, large stellar clouds in the Milky Way, and nuclei of other galaxies. The Marshall Space Flight Center had program responsibility for the development of Skylab hardware and experiments.

TEACHING ADULTS BY TELEVISION, A REPORT OF AN EXPERIMENT IN THE TEACHING OF ELEMENTARY ENGLISH AND ARITHMETIC TO ADULT AFRICANS ON THE COPPERBELT, ZAMBIA, 1963-1965.

ERIC Educational Resources Information Center

CRIPWELL, KENNETH K.R.

THREE EXPERIMENTS WERE DESIGNED TO TEACH ADULT MEN WITH LIMITED EDUCATION A CLOSED-CIRCUIT TELEVISIED COURSE IN ENGLISH AND ARITHMETIC, TO BE REINFORCED BY CONVENTIONAL CLASSROOM INSTRUCTION. BACKGROUND AND GENERAL PROCEDURES OF THE EXPERIMENTS ARE DESCRIBED, AND STATISTICAL DATA REPORTED FOR COMPARISONS ON ABILITY BEFORE AND AFTER INSTRUCTION…

Teaching Experiment to Elucidate a Cation-Pi Effect in an Alkyne Cycloaddition Reaction and Illustrate Hypothesis-Driven Design of Experiments

ERIC Educational Resources Information Center

St.Germain, Elijah J.; Horowitz, Andrew S.; Rucco, Dominic; Rezler, Evonne M.; Lepore, Salvatore D.

2017-01-01

An organic chemistry experiment is described that is based on recent research to elucidate a novel cation-pi interaction between tetraalkammonium cations and propargyl hydrazines. This nonbonded interaction is a key component of the mechanism of ammonium-catalyzed intramolecular cycloaddition of nitrogen to the terminal carbon of a C-C triple bond…

A Laboratory Experiment To Measure Henry's Law Constants of Volatile Organic Compounds with a Bubble Column and a Gas Chromatography Flame Ionization Detector (GC-FID)

ERIC Educational Resources Information Center

Lee, Shan-Hu; Mukherjee, Souptik; Brewer, Brittany; Ryan, Raphael; Yu, Huan; Gangoda, Mahinda

2013-01-01

An undergraduate laboratory experiment is described to measure Henry's law constants of organic compounds using a bubble column and gas chromatography flame ionization detector (GC-FID). This experiment is designed for upper-division undergraduate laboratory courses and can be implemented in conjunction with physical chemistry, analytical…

Supporting Aphasics for Capturing, Organizing and Sharing Personal Experiences

NASA Astrophysics Data System (ADS)

Al Mahmud, Abdullah

When a person, due to brain injury or another disease, suffers in his or her ability to speak, it becomes inherently cumbersome to share needs, emotions, and experiences through personal stories and social interaction. This paper describes the aim and progress of the author’s dissertation, which focuses on designing a support system to share daily experiences for people suffering from expressive aphasia.

Structural Optimization of a Force Balance Using a Computational Experiment Design

NASA Technical Reports Server (NTRS)

Parker, P. A.; DeLoach, R.

2002-01-01

This paper proposes a new approach to force balance structural optimization featuring a computational experiment design. Currently, this multi-dimensional design process requires the designer to perform a simplification by executing parameter studies on a small subset of design variables. This one-factor-at-a-time approach varies a single variable while holding all others at a constant level. Consequently, subtle interactions among the design variables, which can be exploited to achieve the design objectives, are undetected. The proposed method combines Modern Design of Experiments techniques to direct the exploration of the multi-dimensional design space, and a finite element analysis code to generate the experimental data. To efficiently search for an optimum combination of design variables and minimize the computational resources, a sequential design strategy was employed. Experimental results from the optimization of a non-traditional force balance measurement section are presented. An approach to overcome the unique problems associated with the simultaneous optimization of multiple response criteria is described. A quantitative single-point design procedure that reflects the designer's subjective impression of the relative importance of various design objectives, and a graphical multi-response optimization procedure that provides further insights into available tradeoffs among competing design objectives are illustrated. The proposed method enhances the intuition and experience of the designer by providing new perspectives on the relationships between the design variables and the competing design objectives providing a systematic foundation for advancements in structural design.

An After-School Counseling Program for High-Risk Middle School Students

ERIC Educational Resources Information Center

Kruczek, Theresa; Alexander, Charlene M.; Harris, Kevin

2005-01-01

There are a number of middle school students who experience difficulty making the transition from childhood to early adolescence and may be described as high-risk. This article describes an after-school program designed to promote healthy identity and adaptive personal choice behaviors in a high-risk group of middle school students.

Life science research objectives and representative experiments for the space station

NASA Technical Reports Server (NTRS)

Johnson, Catherine C. (Editor); Arno, Roger D. (Editor); Mains, Richard (Editor)

1989-01-01

A workshop was convened to develop hypothetical experiments to be used as a baseline for space station designer and equipment specifiers to ensure responsiveness to the users, the life science community. Sixty-five intra- and extramural scientists were asked to describe scientific rationales, science objectives, and give brief representative experiment descriptions compatible with expected space station accommodations, capabilities, and performance envelopes. Experiment descriptions include hypothesis, subject types, approach, equipment requirements, and space station support requirements. The 171 experiments are divided into 14 disciplines.

ThermoData Engine (TDE): software implementation of the dynamic data evaluation concept. 5. Experiment planning and product design.

PubMed

Diky, Vladimir; Chirico, Robert D; Kazakov, Andrei F; Muzny, Chris D; Magee, Joseph W; Abdulagatov, Ilmutdin; Kang, Jeong Won; Kroenlein, Kenneth; Frenkel, Michael

2011-01-24

ThermoData Engine (TDE) is the first full-scale software implementation of the dynamic data evaluation concept, as reported recently in this journal. In the present paper, we describe development of an algorithmic approach to assist experiment planning through assessment of the existing body of knowledge, including availability of experimental thermophysical property data, variable ranges studied, associated uncertainties, state of prediction methods, and parameters for deployment of prediction methods and how these parameters can be obtained using targeted measurements, etc., and, indeed, how the intended measurement may address the underlying scientific or engineering problem under consideration. A second new feature described here is the application of the software capabilities for aid in the design of chemical products through identification of chemical systems possessing desired values of thermophysical properties within defined ranges of tolerance. The algorithms and their software implementation to achieve this are described. Finally, implementation of a new data validation and weighting system is described for vapor-liquid equilibrium (VLE) data, and directions for future enhancements are outlined.

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

NASA Technical Reports Server (NTRS)

Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.

1999-01-01

The Multidisciplinary Optimization (MDO) Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. An optimization framework call improve the design process while reducing time and costs. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. Since the release of version 4.0, the MDO Branch has gained experience with the iSIGHT framework developed by Engineous Software, Inc. This paper describes experiences with four aerospace applications: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. All applications have been successfully tested using the iSIGHT framework, except for the aerospike nozzle problem, which is in progress. Brief overviews of each problem are provided. The problem descriptions include the number and type of disciplinary codes, as well as all estimate of the multidisciplinary analysis execution time. In addition, the optimization methods, objective functions, design variables, and design constraints are described for each problem. Discussions on the experience gained and lessons learned are provided for each problem. These discussions include the advantages and disadvantages of using the iSIGHT framework for each case as well as the ease of use of various advanced features. Potential areas of improvement are identified.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lazarus, E.A.; Attenberger, S.E.; Baylor, L.R.

The design of the Spherical Torus Experiment (STX) is discussed. The physics of the plasma are given in a magnetohydrodynamic model. The structural aspects and instrumentation of the device are described. 19 refs., 103 figs. (WRF)

Does Electrostatic Shielding Work Both Ways?

ERIC Educational Resources Information Center

Geller, Zvi; Bagno, Esther

1994-01-01

Describes an experiment designed to disprove the belief that an electrical field originating from a point inside a closed conducting surface cannot produce an electric field outside this surface. (ZWH)

Air cushion vehicles: A briefing

NASA Technical Reports Server (NTRS)

Anderson, J. L.; Finnegan, P. M.

1971-01-01

Experience and characteristics; the powering, uses, and implications of large air cushion vehicles (ACV); and the conceptual design and operation of a nuclear powered ACV freighter and supporting facilities are described.

Living Together in Space: The Design and Operation of the Life Support Systems on the International Space Station. Volume 1

NASA Technical Reports Server (NTRS)

Wieland, P. O.

1998-01-01

The International Space Station (ISS) incorporates elements designed and developed by an international consortium led by the United States (U.S.), and by Russia. For this cooperative effort to succeed, it is crucial that the designs and methods of design of the other partners are understood sufficiently to ensure compatibility. Environmental Control and Life Support (ECLS) is one system in which functions are performed independently on the Russian Segment (RS) and on the U.S./international segments. This document describes, in two volumes, the design and operation of the ECLS Systems (ECLSS) on board the ISS. This current volume, Volume 1, is divided into three chapters. Chapter 1 is a general overview of the ISS, describing the configuration, general requirements, and distribution of systems as related to the ECLSS, and includes discussion of the design philosophies of the partners and methods of verification of equipment. Chapter 2 describes the U.S. ECLSS and technologies in greater detail. Chapter 3 describes the ECLSS in the European Attached Pressurized Module (APM), Japanese Experiment Module (JEM), and Italian Mini-Pressurized Logistics Module (MPLM). Volume II describes the Russian ECLSS and technologies in greater detail. These documents present thorough, yet concise, descriptions of the ISS ECLSS.

A Qualitative Assessment of the Practice Experiences of Certified Diabetes Educator Pharmacists.

PubMed

Alzahrani, Fahad; Taylor, Jeff; Perepelkin, Jason; Mansell, Kerry

2015-08-01

To describe the practice experiences of Certified Diabetes Educator (CDE) pharmacists in Saskatchewan and determine what impact the CDE designation has had on their personal practices. A qualitative research approach was used. All pharmacists in Saskatchewan were e-mailed about the study, and eventually, a purposive sampling method was used to select a range of CDE pharmacists. Semistructured, in-person interviews were performed. An interview guide was developed to assess the work activities performed, the benefits of becoming a CDE and the challenges and resultant solutions that optimize their CDE designations. All interviews were transcribed verbatim and coded using deductive thematic analysis to identify the main themes that described the experiences of respondents, with the aid of QSR NVivo. A total of 14 CDE pharmacists from various communities and work settings chose to participate. All of the participants indicated they were engaging in increased diabetes-related activities since becoming CDEs. All participants indicated they were happy with their decisions to become CDEs and described numerous benefits as a direct result of achieving this designation. Although some solutions were offered, participants still face challenges in optimizing their role as CDEs, such as devoting enough time to diabetes management and remuneration for providing diabetes services. CDE pharmacists in Saskatchewan report performing enhanced diabetes-related activities subsequent to becoming CDEs and that obtaining this designation has had a positive impact on their personal practices. A larger, cross-country study is necessary to determine whether these results are consistent amongst all pharmacists in Canada. Copyright © 2015 Canadian Diabetes Association. Published by Elsevier Inc. All rights reserved.

An Experimental Introduction to Kinetic Theory.

ERIC Educational Resources Information Center

Daw, Harold A.

This monograph was written for the Conference on the New Instructional Materials in Physics, held at the University of Washington in summer, 1965. It describes a series of experiments designed to demonstrate the behavior of a system of macroscopic particles whose interactions are of very short range. The apparatus for the experiments include a…

Education and Research Related to Organic Waste Management at Agricultural Engineering Schools

ERIC Educational Resources Information Center

Soliva, Montserrat; Bernat, Carles; Gil, Emilio; Martinez, Xavier; Pujol, Miquel; Sabate, Josep; Valero, Jordi

2007-01-01

Purpose: The purpose of this paper is to describe the experience of the Agriculture Engineering School of Barcelona (ESAB), where undergraduate students were involved in field research experiments on organic waste use in agricultural systems. Design/methodology/approach: The paper outlines how the formation of professionals oriented to work for…

Thermodynamics Fundamental Equation of a "Non-Ideal" Rubber Band from Experiments

ERIC Educational Resources Information Center

Ritacco, Herna´n A.; Fortunatti, Juan C.; Devoto, Walter; Ferna´ndez-Miconi, Eugenio; Dominguez, Claudia; Sanchez, Miguel D.

2014-01-01

In this paper, we describe laboratory and classroom exercises designed to obtain the "fundamental" equation of a rubber band by combining experiments and theory. The procedure shows students how classical thermodynamics formalism can help to obtain empirical equations of state by constraining and guiding in the construction of the…

On the "Give" and "Take" between Event Apprehension and Utterance Formulation

ERIC Educational Resources Information Center

Gleitman, Lila R.; January, David; Nappa, Rebecca; Trueswell, John C.

2007-01-01

Two experiments are reported that examine how manipulations of visual attention affect speakers' linguistic choices regarding word order, verb use and syntactic structure when describing simple pictured scenes. Experiment 1 presented participants with scenes designed to elicit the use of a perspective predicate ("The man chases the dog/The dog…

Learning Analytics: At the Nexus of Big Data, Digital Innovation, and Social Justice in Education

ERIC Educational Resources Information Center

Aguilar, Stephen J.

2018-01-01

We are still designing educational experiences for the "average" student, and have room to improve. Learning analytics provides a way forward. This commentary describes how learning analytics-based applications are well positioned to meaningfully personalize the learning experience in diverse ways. In so doing, learning analytics has the…

Recovery Experiences of Taiwanese Women after Terminating Abusive Relationships: A Phenomenology Study

ERIC Educational Resources Information Center

Hou, Wen-Li; Ko, Nai-Ying; Shu, Bih-Ching

2013-01-01

This article describes the recovery experiences of women who had suffered intimate partner violence in Taiwan. A phenomenological study design using semi-structured interviews was used to obtain data from a purposive sample of eight women. Colaizzi's approach to narrative analysis was applied. Findings indicate that "reconstructing the self"…

African American Teacher Candidates' Experiences in Teaching Secondary Physical Education

ERIC Educational Resources Information Center

Sato, Takahiro; Hodge, Samuel Russell

2017-01-01

The purpose of this study was to describe and explain the teaching experiences of African American physical education teacher candidates in secondary physical education programs at urban schools. The research design was explanatory multiple-case study situated in positioning theory (Harré & van Langenhove, 1999). The participants were seven…

Improving Aerospace Engineering Students' Achievements by an Open Aero Control Experiment Apparatus

ERIC Educational Resources Information Center

Zeng, QingHua; Zhang, WeiHua; Huang, ZheZhi; Dong, RongHua

2014-01-01

This paper describes the development of an aero control experiment apparatus (ACEA) for use in aerospace control practical courses. The ACEA incorporates a systematic multihierarchy learning and teaching method, and was designed to improve aerospace engineering students' understanding of unmanned aerial vehicle (UAV) control systems. It offers a…

Freshmen Marketing: A First-Year Experience with Experiential Learning

ERIC Educational Resources Information Center

Greene, Henry

2011-01-01

This paper describes an experiential learning activity designed for a New England university freshmen course, BUS101-Marketing First-Year Experience (FYE). The purpose of the activity is to teach basic principles of marketing, develop a general perspective of business, and provide FYE activities that facilitate the college transition. The specific…

Apollo-Soyuz Pamphlet No. 4: Gravitational Field. Apollo-Soyuz Experiments in Space.

ERIC Educational Resources Information Center

Page, Lou Williams; Page, Thornton

This booklet is the fourth in a series of nine that describe the Apollo-Soyuz mission and experiments. This set is designed as a curriculum supplement for teachers, supervisors, curriculum specialists, textbook writers, and the general public. These booklets provide sources of ideas, examples of the scientific method, references to standard…

The Pea Seedling as a Model of Normal and Abnormal Morphogenesis

ERIC Educational Resources Information Center

Kurkdjian, Armen; And Others

1974-01-01

Describes several simple and inexpensive experiments designed to facilitate the study of normal and abnormal morphogenesis in the biology laboratory. Seedlings of the common garden pea are used in the experiments, and abnormal morphogenesis (tumors) are induced by a virulent strain of the crown-gall organism, Agrobacterium tumefaciens. (JR)

Creating Significant Learning Experiences through Civic Engagement: Practical Strategies for Community- Engaged Pedagogy

ERIC Educational Resources Information Center

Trudeau, Dan; Kruse, Tina P.

2014-01-01

This article examines two case studies that describe different ways of working with community partners to create civic engagement experiences in undergraduate education. Analysis of the case studies yields guidance about practical decisions involved in planning, designing, and executing pedagogy that uses engagement to generate what Fink calls…

Learning Posts: A Pedagogical Experiment with Undergraduate Music Education Majors

ERIC Educational Resources Information Center

Countryman, June

2012-01-01

This article describes the effects of a year-long reflective writing assignment--weekly Learning Posts--designed for students in an undergraduate music education course. I created this assignment to cause students to regularly interrogate the teaching and learning they experience in their own daily lives. This study's research question emerged…

TD-1A: Press kit

NASA Technical Reports Server (NTRS)

Allaway, H. G.; Senstad, K.

1972-01-01

The scientific experiments onboard the Thor-Delta 1Z spacecraft are described. The experiments were designed to study high energy emissions from stellar and galactic sources and the Sun not visible to earth bound observations. Studies were also made of the ultraviolet radiation, X-rays, gamma rays unhindered by the blanketing and absorbing effect of the earth's atmosphere.

Health Education Field Experience Stories: A Reflective, Digital, Performance-Based Project

ERIC Educational Resources Information Center

Lyde, Adrian R.

2012-01-01

This article describes a reflective, systematic, performance-based project resulting in the development of a digital story about a community health education field experience. The project is designed for preservice health education students at the college/university level. The primary benefit of the project is that it challenges students to engage…

A Novel Approach: Historical Fiction in the Elementary Classroom

ERIC Educational Resources Information Center

Cruz, Bárbara C.

2013-01-01

Barbara Cruz describes how what began as a challenge (i.e., finding or justifying the time to spend on history instruction in an environment of high-stakes testing) turned into a rich learning experience for students using historical fiction. By designing experiences that were literacy centered but based in historical content, this group of…

The Culture of Distance Education: Implementing an Online Graduate Level Course in Audience Analysis.

ERIC Educational Resources Information Center

Duin, Ann Hill

1998-01-01

Details the experience of designing, implementing, and evaluating an online course in audience analysis at the graduate level. Describes how the educational culture of the Land Grant Mission flowed into efforts to create a quality learning experience. Discusses how the Web modules and asynchronous (listserv) and synchronous (MOO) conversations…

Using FTIR-ATR Spectroscopy to Teach the Internal Standard Method

ERIC Educational Resources Information Center

Bellamy, Michael K.

2010-01-01

The internal standard method is widely applied in quantitative analyses. However, most analytical chemistry textbooks either omit this topic or only provide examples of a single-point internal standardization. An experiment designed to teach students how to prepare an internal standard calibration curve is described. The experiment is a modified…

Characterization of Gas Chromatographic Liquid Phases Using McReynolds Constants. An Experiment for Instrumental Analysis Laboratory.

ERIC Educational Resources Information Center

Erskine, Steven R.; And Others

1986-01-01

Describes a laboratory experiment that is designed to aid in the understanding of the fundamental process involved in gas chromatographic separations. Introduces the Kovats retention index system for use by chemistry students to establish criteria for the optimal selection of gas chromatographic stationary phases. (TW)

The Experiences and Effect of Two Post-Secondary Mathematics Remediation Programs

ERIC Educational Resources Information Center

Izard, Angie D.

2010-01-01

The purpose of this study was to describe the experience and effect of two post-secondary mathematics remediation programs at a Midwest university. The two mathematics remediation programs were provided as part of a summer bridge program designed to assist entering freshmen students who demonstrated low mathematics proficiency levels based on…

Surface electrical properties experiment study phase, volume 3

NASA Technical Reports Server (NTRS)

1973-01-01

The reliability and quality assurance system and procedures used in developing test equipment for the Lunar Experiment projects are described. The subjects discussed include the following: (1) documentation control, (2) design review, (3) parts and materials selection, (4) material procurement, (5) inspection procedures, (6) qualification and special testing, and failure modes and effects analysis.

Experiencing health care service quality: through patients' eyes.

PubMed

Schembri, Sharon

2015-02-01

The primary aim of the present study was to consider health care service quality from the patients' perspective, specifically through the patient's eyes. A narrative analysis was performed on 300 patient stories. This rigorous analysis of patient stories is designed to identify and describe health care service quality through patients' eyes in an authentic and accurate, experiential manner. The findings show that there are variant and complex ways that patients experience health care service quality. Patient stories offer an authentic view of the complex ways that patients experience health care service quality. Narrative analysis is a useful tool to identify and describe how patients experience health care service quality. Patients experience health care service quality in complex and varying ways.

Combined Cycle Engine Large-Scale Inlet for Mode Transition Experiments: System Identification Rack Hardware Design

NASA Technical Reports Server (NTRS)

Thomas, Randy; Stueber, Thomas J.

2013-01-01

The System Identification (SysID) Rack is a real-time hardware-in-the-loop data acquisition (DAQ) and control instrument rack that was designed and built to support inlet testing in the NASA Glenn Research Center 10- by 10-Foot Supersonic Wind Tunnel. This instrument rack is used to support experiments on the Combined-Cycle Engine Large-Scale Inlet for Mode Transition Experiment (CCE? LIMX). The CCE?LIMX is a testbed for an integrated dual flow-path inlet configuration with the two flow paths in an over-and-under arrangement such that the high-speed flow path is located below the lowspeed flow path. The CCE?LIMX includes multiple actuators that are designed to redirect airflow from one flow path to the other; this action is referred to as "inlet mode transition." Multiple phases of experiments have been planned to support research that investigates inlet mode transition: inlet characterization (Phase-1) and system identification (Phase-2). The SysID Rack hardware design met the following requirements to support Phase-1 and Phase-2 experiments: safely and effectively move multiple actuators individually or synchronously; sample and save effector control and position sensor feedback signals; automate control of actuator positioning based on a mode transition schedule; sample and save pressure sensor signals; and perform DAQ and control processes operating at 2.5 KHz. This document describes the hardware components used to build the SysID Rack including their function, specifications, and system interface. Furthermore, provided in this document are a SysID Rack effectors signal list (signal flow); system identification experiment setup; illustrations indicating a typical SysID Rack experiment; and a SysID Rack performance overview for Phase-1 and Phase-2 experiments. The SysID Rack described in this document was a useful tool to meet the project objectives.

Minimizing student’s faults in determining the design of experiment through inquiry-based learning

NASA Astrophysics Data System (ADS)

Nilakusmawati, D. P. E.; Susilawati, M.

2017-10-01

The purpose of this study were to describe the used of inquiry method in an effort to minimize student’s fault in designing an experiment and to determine the effectiveness of the implementation of the inquiry method in minimizing student’s faults in designing experiments on subjects experimental design. This type of research is action research participants, with a model of action research design. The data source were students of the fifth semester who took a subject of experimental design at Mathematics Department, Faculty of Mathematics and Natural Sciences, Udayana University. Data was collected through tests, interviews, and observations. The hypothesis was tested by t-test. The result showed that the implementation of inquiry methods to minimize of students fault in designing experiments, analyzing experimental data, and interpret them in cycle 1 students can reduce fault by an average of 10.5%. While implementation in Cycle 2, students managed to reduce fault by an average of 8.78%. Based on t-test results can be concluded that the inquiry method effectively used to minimize of student’s fault in designing experiments, analyzing experimental data, and interpreting them. The nature of the teaching materials on subject of Experimental Design that demand the ability of students to think in a systematic, logical, and critical in analyzing the data and interpret the test cases makes the implementation of this inquiry become the proper method. In addition, utilization learning tool, in this case the teaching materials and the students worksheet is one of the factors that makes this inquiry method effectively minimizes of student’s fault when designing experiments.

Martins Creek S. E. S. 800-MW Units 3 and 4: design and operating experience with axial-flow FD and ID fans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curley, C.C.; Overas, A.J.

1976-01-01

The design and performance of the variable-pitch axial-flow forced-draft and induced-draft fans used in two 820MW generating units at the Martins Creek Power Plant are described. Information is included on fan design; silencers; mechanical and metallurgical testing; insulation; performance testing; start-up and shutdown procedures; and maintenance. (LCL)

Spacecraft high-voltage power supply construction

NASA Technical Reports Server (NTRS)

Sutton, J. F.; Stern, J. E.

1975-01-01

The design techniques, circuit components, fabrication techniques, and past experience used in successful high-voltage power supplies for spacecraft flight systems are described. A discussion of the basic physics of electrical discharges in gases is included and a design rationale for the prevention of electrical discharges is provided. Also included are typical examples of proven spacecraft high-voltage power supplies with typical specifications for design, fabrication, and testing.

Design and fabrication of a CCD camera for use with relay optics in solar X-ray astronomy

NASA Technical Reports Server (NTRS)

1984-01-01

Configured as a subsystem of a sounding rocket experiment, a camera system was designed to record and transmit an X-ray image focused on a charge coupled device. The camera consists of a X-ray sensitive detector and the electronics for processing and transmitting image data. The design and operation of the camera are described. Schematics are included.

Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE): Conceptual Design Report. Volume 3: Long-Baseline Neutrino Facility for DUNE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strait, James; McCluskey, Elaine; Lundin, Tracy

2016-01-21

This volume of the LBNF/DUNE Conceptual Design Report covers the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both Fermilab and SURF, and the cryostat and cryogenics infrastructure required for the DUNE far detector.

Conceptual design of Dipole Research Experiment (DREX)

NASA Astrophysics Data System (ADS)

Xiao, Qingmei; Wang, Zhibin; Wang, Xiaogang; Xiao, Chijie; Yang, Xiaoyi; Zheng, Jinxing

2017-03-01

A new terrella-like device for laboratory simulation of inner magnetosphere plasmas, Dipole Research Experiment, is scheduled to be built at the Harbin Institute of Technology (HIT), China, as a major state scientific research facility for space physics studies. It is designed to provide a ground experimental platform to reproduce the inner magnetosphere to simulate the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration. The scaling relation of hydromagnetism between the laboratory plasma of the device and the geomagnetosphere plasma is applied to resemble geospace processes in the Dipole Research Experiment plasma. Multiple plasma sources, different kinds of coils with specific functions, and advanced diagnostics are designed to be equipped in the facility for multi-functions. The motivation, design criteria for the Dipole Research Experiment experiments and the means applied to generate the plasma of desired parameters in the laboratory are also described. Supported by National Natural Science Foundation of China (Nos. 11505040, 11261140326 and 11405038), China Postdoctoral Science Foundation (Nos. 2016M591518, 2015M570283) and Project Supported by Natural Scientific Research Innovation Foundation in Harbin Institute of Technology (No. 2017008).

Preliminary thermal design of the COLD-SAT spacecraft

NASA Technical Reports Server (NTRS)

Arif, Hugh

1991-01-01

The COLD-SAT free-flying spacecraft was to perform experiments with LH2 in the cryogenic fluid management technologies of storage, supply and transfer in reduced gravity. The Phase A preliminary design of the Thermal Control Subsystem (TCS) for the spacecraft exterior and interior surfaces and components of the bus subsystems is described. The TCS was composed of passive elements which were augmented with heaters. Trade studies to minimize the parasitic heat leakage into the cryogen storage tanks are described. Selection procedure for the thermally optimum on-orbit spacecraft attitude was defined. TRASYS-2 and SINDA'85 verification analysis was performed on the design and the results are presented.

Using the Wiimote to Learn MEMS in a Physics Degree Program

ERIC Educational Resources Information Center

Sánchez-Azqueta, Carlos; Gimeno, Cecilia; Celma, Santiago; Aldea, Concepción

2016-01-01

This paper describes a learning experience designed to introduce students in a Micro- and Nanosystems course in a Physics Bachelor's degree program to the use of professional tools for the design and characterization of micro-electromechanical systems (MEMS) through a specific commercial case: the MEMS used by the well-known gaming platform…

Design and Development of "The Reading Biographer": An Application of Function Specific Assessment.

ERIC Educational Resources Information Center

Hanson, Ralph A.; Siegel, Donna Farrell

The general features of function-specific assessment are described and illustrated via a discussion of the design and development of "The Reading Biographer," an instrument for assessing experiences and activities of students (from early childhood through high school) that affect their reading achievement as high school seniors. The…

One-Dimensional Collision Carts Computer Model and Its Design Ideas for Productive Experiential Learning

ERIC Educational Resources Information Center

Wee, Loo Kang

2012-01-01

We develop an Easy Java Simulation (EJS) model for students to experience the physics of idealized one-dimensional collision carts. The physics model is described and simulated by both continuous dynamics and discrete transition during collision. In designing the simulations, we discuss briefly three pedagogical considerations namely (1) a…

Designing Multimedia for Ecological Tourism in an Educational Setting.

ERIC Educational Resources Information Center

Passerini, Katia; Granger, Mary J.

This paper describes the development process of multimedia software designed to educate and provide awareness of ecotourism in Costa Rica. Ecotourism is a form of nature-based travel and recreational experience combining a respect for nature and local cultures with economic development incentives. The software intends to pursue the goals of…

Racing with the Sun: Students Learn Physics while Designing a Solar-Powered Vehicle

ERIC Educational Resources Information Center

Marshall, Jeff

2004-01-01

In this article, the author describes his experience conducting an inquiry investigation in his classroom in which high school physics students design, create, and race a solar-powered vehicle. Students learn invaluable science, technology, mathematics, communication, and critical thinking skills. Fueled by their knowledge, creativity, and the…

Designing and Using an Open Graphic Interface for Instruction in Geometrical Optics.

ERIC Educational Resources Information Center

Ronen, Miky; And Others

1993-01-01

Discusses conceptual difficulties in the field of geometrical optics and describes RAY, a microcomputer-based graphic interface that was designed to serve as a teaching aid and as a learning environment. The ability to combine theory and formal representations with real demonstrations and experiments is discussed. (Contains seven references.) (LRW)

Earth integrated design: office dormitory facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapira, H. B.; Barnes, P. R.

1980-01-01

The generation process of the design of the Joint Institute for Heavy Ion Research is described. Architectural and energy considerations are discussed. The facility will contain living quarters for guest scientists who come to Oak Ridge to conduct short experiments and sleeping alcoves for local researchers on long experimental shifts as well as office space. (MHR)

Using Participatory Design to Improve Web Sites

ERIC Educational Resources Information Center

Nikolova-Houston, Tatiana

2005-01-01

In this article, the author, a doctoral candidate from the School of Information at the University of Texas-Austin, describes the experience gathered from her attempt to redesign her existing Web sites in order to supply online resources for Slavic and Byzantine studies. The use of participatory design, which involves the users in creating the…

The Evolution of Computer Based Learning Software Design: Computer Assisted Teaching Unit Experience.

ERIC Educational Resources Information Center

Blandford, A. E.; Smith, P. R.

1986-01-01

Describes the style of design of computer simulations developed by Computer Assisted Teaching Unit at Queen Mary College with reference to user interface, input and initialization, input data vetting, effective display screen use, graphical results presentation, and need for hard copy. Procedures and problems relating to academic involvement are…

Computer-Aided Training for Transport Planners: Experience with the Pluto Package.

ERIC Educational Resources Information Center

Bonsall, P. W.

1995-01-01

Describes the PLUTO model, an interactive computer program designed for use in education and training of city planners and engineers. Emphasizes four issues: (1) the balance between realism and simplification; (2) the design of the user interface; (3) comparative advantages of group and solo working; and (4) factors affecting the decision to…

Disruptive Design in Pre-Service Teacher Education: Uptake, Participation, and Resistance

ERIC Educational Resources Information Center

Anderson, Janice L.; Justice, Julie E.

2015-01-01

This paper begins the exploration of disruption as an analytical construct that allows for the investigation of how individual learning and changes in local practice mutually influence the other within a purposefully designed learning context. We seek to describe the types of learning experiences that emerged using disruptive pedagogies and tools…

Movement Maps: Where Should I Move and How Should I Get There?

ERIC Educational Resources Information Center

Mally, Kristi

2005-01-01

The Skill Theme approach underlies the purpose and design of the movement maps described in this article. This approach promotes fundamental movement skill competence. Learning experiences are designed to accommodate the developmental needs of individual students. Further, an emphasis is placed on providing high repetition and variety through…

Belle2VR: A Virtual-Reality Visualization of Subatomic Particle Physics in the Belle II Experiment.

PubMed

Duer, Zach; Piilonen, Leo; Glasson, George

2018-05-01

Belle2VR is an interactive virtual-reality visualization of subatomic particle physics, designed by an interdisciplinary team as an educational tool for learning about and exploring subatomic particle collisions. This article describes the tool, discusses visualization design decisions, and outlines our process for collaborative development.

Graphing in Groups: Learning about Lines in a Collaborative Classroom Network Environment

ERIC Educational Resources Information Center

White, Tobin; Wallace, Matthew; Lai, Kevin

2012-01-01

This article presents a design experiment in which we explore new structures for classroom collaboration supported by a classroom network of handheld graphing calculators. We describe a design for small group investigations of linear functions and present findings from its implementation in three high school algebra classrooms. Our coding of the…

Teacher Responses to a Planning Framework for Junior Technology Classes Learning outside the Classroom

ERIC Educational Resources Information Center

Milne, Louise; Eames, Chris

2011-01-01

This paper describes teacher responses to a framework designed to support teacher planning for technology. It includes a learning experience outside the classroom [LEOTC] and is designed specifically for five-year-old students. The planning framework draws together characteristics of technology education, junior primary classrooms and LEOTC to…

Exploring Some Design Principles for Tutoring in Preservice Teacher Preparation

ERIC Educational Resources Information Center

Hoffman, James V.; Mosley Wetzel, Melissa

2017-01-01

In this article we summarize our research into literacy preservice teacher preparation. We situate our research on tutorials in the practice turn in teacher preparation. We describe the evolution of our work drawing on findings from seven different studies with the goal of identifying the design features of tutorial experiences that promote…

Schooling as a Knowledge System: Lessons from Cramim Experimental School

ERIC Educational Resources Information Center

Chen, David

2010-01-01

This article describes an experiment utilizing a research and development strategy to design and implement an innovative school for the future. The development of Cramim Elementary School was a joint effort of researchers from Tel-Aviv University and the staff of the school. The design stage involved constructing a new theoretical framework that…

Examining the Design Features of a Communication-Rich, Problem-Centred Mathematics Professional Development

ERIC Educational Resources Information Center

de Araujo, Zandra; Orrill, Chandra Hawley; Jacobson, Erik

2018-01-01

While there is considerable scholarship describing principles for effective professional development, there have been few attempts to examine these principles in practice. In this paper, we identify and examine the particular design features of a mathematics professional development experience provided for middle grades teachers over 14 weeks. The…

Blended Learning in Vocational Education: Teachers' Conceptions of Blended Learning and Their Approaches to Teaching and Design

ERIC Educational Resources Information Center

Bliuc, Ana-Maria; Casey, Grant; Bachfischer, Agnieszka; Goodyear, Peter; Ellis, Robert A.

2012-01-01

This paper presents research exploring teachers' experiences of using blended learning in vocational education. Teachers involved in designing and teaching using blended learning from a major Australian vocational education provider participated in the study. They received open-ended questionnaires asking to describe their conceptions of blended…

Inquiry-Based Learning in Mathematics: Designing Collaborative Research with Schools

ERIC Educational Resources Information Center

Makar, Katie; Dole, Shelley

2013-01-01

A series of research projects were implemented over seven years to understand and facilitate teachers' experiences in adopting inquiry. An overview of the project, methodology and key outcomes are outlined as a basis for the partnership described in this symposium. We end the paper with a list of recommendations for designing collaborative…

In Designing a Short Course in ESP.

ERIC Educational Resources Information Center

Chantrupanth, Dhanan

This report describes one teacher's experience in designing and teaching an English course of 15 hours to nursing students specializing in anesthesia. The discussion focuses on how an English teacher can equip students with effective reading skills in such a specific area, and to what extent the teacher can involve the subject content. An…

Four experimental demonstrations of active vibration control for flexible structures

NASA Technical Reports Server (NTRS)

Phillips, Doug; Collins, Emmanuel G., Jr.

1990-01-01

Laboratory experiments designed to test prototype active-vibration-control systems under development for future flexible space structures are described, summarizing previously reported results. The control-synthesis technique employed for all four experiments was the maximum-entropy optimal-projection (MEOP) method (Bernstein and Hyland, 1988). Consideration is given to: (1) a pendulum experiment on large-amplitude LF dynamics; (2) a plate experiment on broadband vibration suppression in a two-dimensional structure; (3) a multiple-hexagon experiment combining the factors studied in (1) and (2) to simulate the complexity of a large space structure; and (4) the NASA Marshall ACES experiment on a lightweight deployable 45-foot beam. Extensive diagrams, drawings, graphs, and photographs are included. The results are shown to validate the MEOP design approach, demonstrating that good performance is achievable using relatively simple low-order decentralized controllers.

Novel Circuits for Energizing Manganin Stress Gauges

NASA Astrophysics Data System (ADS)

Tasker, Douglas

2015-06-01

This paper describes the design, manufacture and testing of novel MOSFET pulsed constant current supplies for low impedance Manganin stress gauges. The design emphasis has been on high accuracy, low noise, simple, low cost, disposable supplies that can be used to energize multiple gauges in explosive or shock experiments. Manganin gauges used to measure stresses in detonating explosive experiments have typical resistances of 50 m Ω and are energized with pulsed currents of 50 A. Conventional pulsed current supplies for these gauges are high voltage devices with outputs as high as 500 V. Common problems with the use of high voltage supplies at explosive firing sites are: erroneous signals caused by ground loops; overdrive of oscilloscopes on gauge failure; gauge signal crosstalk; cost; and errors due to finite and changing source impedances. To correct these issues a novel MOSFET circuit was designed and will be described. It is an 18-V circuit, powered by 9-V alkaline batteries, and features an optically isolated trigger, and single-point grounding. These circuits have been successfully tested at the Los Alamos National Laboratory and selected explosive tests will be described together with their results. LA-UR-15-20613.

Description of the meteoroid detection experiment flown on the Pioneer 10 and 11 Jupiter flyby missions

NASA Technical Reports Server (NTRS)

Oneal, R. L. (Compiler)

1974-01-01

The meteoroid detection experiment has the objective of measuring the population of 10 to the minus 9th power and 10 to the minus 8th power grams mass particles in interplanetary space with emphasis on making these measurements in the Asteroid Belt. The instrument design, which uses the pressurized-cell-penetration detection technique, and the tests involved in obtaining a flight-qualified instrument are described. The successful demonstration of flight-quality penetration detectors to function properly under long-term simulated space environments is also described.

Building international experiences into an engineering curriculum - a design project-based approach

NASA Astrophysics Data System (ADS)

Maldonado, Victor; Castillo, Luciano; Carbajal, Gerardo; Hajela, Prabhat

2014-07-01

This paper is a descriptive account of how short-term international and multicultural experiences can be integrated into early design experiences in an aerospace engineering curriculum. Such approaches are considered as important not only in fostering a student's interest in the engineering curriculum, but also exposing them to a multicultural setting that they are likely to encounter in their professional careers. In the broader sense, this programme is described as a model that can be duplicated in other engineering disciplines as a first-year experience. In this study, undergraduate students from Rensselaer Polytechnic Institute (RPI) and Universidad del Turabo (UT) in Puerto Rico collaborated on a substantial design project consisting of designing, fabricating, and flight-testing radio-controlled model aircraft as a capstone experience in a semester-long course on Fundamentals of Flight. The two-week long experience in Puerto Rico was organised into academic and cultural components designed with the following objectives: (i) to integrate students in a multicultural team-based academic and social environment, (ii) to practise team-building skills and develop students' critical thinking and analytical skills, and finally (iii) to excite students about their engineering major through practical applications of aeronautics and help them decide if it is a right fit for them.

Integrated design, execution, and analysis of arrayed and pooled CRISPR genome-editing experiments.

PubMed

Canver, Matthew C; Haeussler, Maximilian; Bauer, Daniel E; Orkin, Stuart H; Sanjana, Neville E; Shalem, Ophir; Yuan, Guo-Cheng; Zhang, Feng; Concordet, Jean-Paul; Pinello, Luca

2018-05-01

CRISPR (clustered regularly interspaced short palindromic repeats) genome-editing experiments offer enormous potential for the evaluation of genomic loci using arrayed single guide RNAs (sgRNAs) or pooled sgRNA libraries. Numerous computational tools are available to help design sgRNAs with optimal on-target efficiency and minimal off-target potential. In addition, computational tools have been developed to analyze deep-sequencing data resulting from genome-editing experiments. However, these tools are typically developed in isolation and oftentimes are not readily translatable into laboratory-based experiments. Here, we present a protocol that describes in detail both the computational and benchtop implementation of an arrayed and/or pooled CRISPR genome-editing experiment. This protocol provides instructions for sgRNA design with CRISPOR (computational tool for the design, evaluation, and cloning of sgRNA sequences), experimental implementation, and analysis of the resulting high-throughput sequencing data with CRISPResso (computational tool for analysis of genome-editing outcomes from deep-sequencing data). This protocol allows for design and execution of arrayed and pooled CRISPR experiments in 4-5 weeks by non-experts, as well as computational data analysis that can be performed in 1-2 d by both computational and noncomputational biologists alike using web-based and/or command-line versions.

The MedlinePlus public user interface: studies of design challenges and opportunities.

PubMed

Marill, Jennifer L; Miller, Naomi; Kitendaugh, Paula

2006-01-01

What are the challenges involved in designing, modifying, and improving a major health information portal that serves over sixty million page views a month? MedlinePlus, the National Library of Medicine's (NLM's) consumer health Website, is examined. Challenges are presented as six "studies," which describe selected design issues and how NLM staff resolved them. Improving MedlinePlus is an iterative process. Changes in the public user interface are ongoing, reflecting Web design trends, usability testing recommendations, user survey results, new technical requirements, and the need to grow the site in an orderly way. Testing and analysis should accompany Website design modifications. New technologies may enhance a site but also introduce problems. Further modifications to MedlinePlus will be informed by the experiences described here.

Didactic trajectory of research in mathematics education using research-based learning

NASA Astrophysics Data System (ADS)

Charitas Indra Prahmana, Rully; Kusumah, Yaya S.; Darhim

2017-10-01

This study aims to describe the role of research-based learning in design a learning trajectory of research in mathematics education to enhance research and academic writing skills for pre-service mathematics teachers. The method used is a design research with three stages, namely the preliminary design, teaching experiment, and retrospective analysis. The research subjects are pre-service mathematics teacher class of 2012 from one higher education institution in Tangerang - Indonesia. The use of research-based learning in designing learning trajectory of research in mathematics education plays a crucial role as a trigger to enhancing math department preservice teachers research and academic writing skills. Also, this study also describes the design principles and characteristics of the learning trajectory namely didactic trajectory generated by the role of research-based learning syntax.

Design and implementation of an experiment scheduling system for the ACTS satellite

NASA Technical Reports Server (NTRS)

Ringer, Mark J.

1994-01-01

The Advanced Communication Technology Satellite (ACTS) was launched on the 12th of September 1993 aboard STS-51. All events since that time have proceeded as planned with user operations commencing on December 6th, 1993. ACTS is a geosynchronous satellite designed to extend the state of the art in communication satellite design and is available to experimenters on a 'time/bandwidth available' basis. The ACTS satellite requires the advance scheduling of experimental activities based upon a complex set of resource, state, and activity constraints in order to ensure smooth operations. This paper describes the software system developed to schedule experiments for ACTS.

The NDCX-II engineering design

NASA Astrophysics Data System (ADS)

Waldron, W. L.; Abraham, W. J.; Arbelaez, D.; Friedman, A.; Galvin, J. E.; Gilson, E. P.; Greenway, W. G.; Grote, D. P.; Jung, J.-Y.; Kwan, J. W.; Leitner, M.; Lidia, S. M.; Lipton, T. M.; Reginato, L. L.; Regis, M. J.; Roy, P. K.; Sharp, W. M.; Stettler, M. W.; Takakuwa, J. H.; Volmering, J.; Vytla, V. K.

2014-01-01

The Neutralized Drift Compression Experiment (NDCX-II) is a user facility located at Lawrence Berkeley National Laboratory which is uniquely designed for ion-beam-driven high energy density laboratory physics and heavy ion fusion research. Construction was completed in March 2012 and the facility is now in the commissioning phase. A significant amount of engineering was carried out in order to meet the performance parameters required for a wide range of target heating experiments while making the most cost-effective use of high-value hardware available from a decommissioned high current electron induction accelerator. The technical challenges and design of this new ion induction accelerator facility are described.

Results From PAPER/HERA

NASA Astrophysics Data System (ADS)

Pober, Jonathan C.

2018-05-01

The Precision Array for Probing the Epoch of Reionization (PAPER) was a first-generation 21 cm cosmology experiment with the specific goal of detecting the power spectrum of the 21 cm emission from the Epoch of Reionization. Analysis of PAPER data is still ongoing, but lessons learned from PAPER to date have played a critical role in designing the next-generation Hydrogen Epoch of Reionization Array (HERA) experiment. This article reviews five key design choices made by PAPER: use of a non-imaging configuration, redundancy, short baselines, small antenna elements, and a large instantaneous bandwidth. We describe the impact of these choices and the role they played in designing HERA.

A System Analysis Approach to Robot Gripper Control Using Phase Lag Compensator Bode Designs

NASA Astrophysics Data System (ADS)

Aye, Khin Muyar; Lin, Htin; Tun, Hla Myo

2008-10-01

In this paper, we introduce the result comparisons that were developed for the phase lag compensator design using Bode Plots. The implementation of classical experiments as MATLAB m-files is described. Robot gripper control system can be designed to gain insight into a variety of concepts, including stabilization of unstable systems, compensation properties, Bode analysis and design. The analysis has resulted in a number of important conclusions for the design of a new generation of control support systems.

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

NASA Technical Reports Server (NTRS)

Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.

1999-01-01

The Multidisciplinary Optimization (MDO) Branch at NASA Langley is investigating frameworks for supporting multidisciplinary analysis and optimization research. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. This year, the MDO Branch has gained experience with the iSIGHT framework. This paper describes experiences with four aerospace applications, including: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. Brief overviews of each problem are provided, including the number and type of disciplinary codes and computation time estimates. In addition, the optimization methods, objective functions, design variables, and constraints are described for each problem. For each case, discussions on the advantages and disadvantages of using the iSIGHT framework are provided as well as notes on the ease of use of various advanced features and suggestions for areas of improvement.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adamov, E.O.; Kuklin, A.N.; Mityaev, Yu.I.

The nuclear power plants with boiling water reactors of improved safety are being developed. There is 26 years of operating experience with the plant VK-50 in Dimitrovgrad. The design and operation of the BWR reactors are described.

Fundamental Aeronautics Program: Supersonics Project - Channeled Center-Body Inlet Experiment Overview

NASA Technical Reports Server (NTRS)

St. John, Clint; Ratnayake, Nalin A.; Frederick, Mike

2012-01-01

The presentation describes supersonic flight testing accomplished on a novel mixed-compression axisymmetric inlet utilizing channels for off-design flow matching rather than a translating centerbody concept.

Fundamental Aeronautics Program: Supersonics Project. Channeled Center-Body Inlet Experiment Overview

NASA Technical Reports Server (NTRS)

SaintJohn, Clint; Ratnayake, Nalin; Frederick, Mike

2012-01-01

The presentation describes supersonic flight testing accomplished on a novel mixed compression axisymmetric inlet utilizing channels for off design flow matching rather than a translating centerbody concept.

Propagation of Computational Uncertainty Using the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2007-01-01

This paper describes the use of formally designed experiments to aid in the error analysis of a computational experiment. A method is described by which the underlying code is approximated with relatively low-order polynomial graduating functions represented by truncated Taylor series approximations to the true underlying response function. A resource-minimal approach is outlined by which such graduating functions can be estimated from a minimum number of case runs of the underlying computational code. Certain practical considerations are discussed, including ways and means of coping with high-order response functions. The distributional properties of prediction residuals are presented and discussed. A practical method is presented for quantifying that component of the prediction uncertainty of a computational code that can be attributed to imperfect knowledge of independent variable levels. This method is illustrated with a recent assessment of uncertainty in computational estimates of Space Shuttle thermal and structural reentry loads attributable to ice and foam debris impact on ascent.

Authoring Immersive Mixed Reality Experiences

NASA Astrophysics Data System (ADS)

Misker, Jan M. V.; van der Ster, Jelle

Creating a mixed reality experience is a complicated endeavour. From our practice as a media lab in the artistic domain we found that engineering is “only” a first step in creating a mixed reality experience. Designing the appearance and directing the user experience are equally important for creating an engaging, immersive experience. We found that mixed reality artworks provide a very good test bed for studying these topics. This chapter details three steps required for authoring mixed reality experiences: engineering, designing and directing. We will describe a platform (VGE) for creating mixed reality environments that incorporates these steps. A case study (EI4) is presented in which this platform was used to not only engineer the system, but in which an artist was given the freedom to explore the artistic merits of mixed reality as an artistic medium, which involved areas such as the look and feel, multimodal experience and interaction, immersion as a subjective emotion and game play scenarios.

The design, development, and test of balloonborne and groundbased lidar systems. Volume 3: Groundbased lidar systems

NASA Astrophysics Data System (ADS)

Shepherd, O.; Aurilio, G.; Bucknam, R. D.; Hurd, A. G.; Robertie, N. F.

1991-06-01

This is Volume 3 of a three volume final report on the design, development and test of balloonborne and groundbased lidar systems. Volume 1 describes the design and fabrication of a balloonborne CO2 coherent payload to measure the 10.6 micrometers backscatter from atmospheric aerosols as a function of altitude. Volume 2 describes the August 1987 flight test of Atmospheric Balloonborne Lidar Experiment, ABLE 2. In this volume we describe groundbased lidar development and measurements. A design was developed for installation of the ABLE lidar in the GL rooftop dome. A transportable shed was designed to house the ABLE lidar at the various remote measurement sites. Refurbishment and modification of the ABLE lidar were completed to permit groundbased lidar measurements of clouds and aerosols. Lidar field measurements were made at Ascension Island during SABLE 89. Lidar field measurements were made at Terciera, Azores during GABLE 90. These tasks have been successfully completed, and recommendations for further lidar measurements and data analysis have been made.

Space Station Human Factors: Designing a Human-Robot Interface

NASA Technical Reports Server (NTRS)

Rochlis, Jennifer L.; Clarke, John Paul; Goza, S. Michael

2001-01-01

The experiments described in this paper are part of a larger joint MIT/NASA research effort and focus on the development of a methodology for designing and evaluating integrated interfaces for highly dexterous and multifunctional telerobot. Specifically, a telerobotic workstation is being designed for an Extravehicular Activity (EVA) anthropomorphic space station telerobot called Robonaut. Previous researchers have designed telerobotic workstations based upon performance of discrete subsets of tasks (for example, peg-in-hole, tracking, etc.) without regard for transitions that operators go through between tasks performed sequentially in the context of larger integrated tasks. The experiments presented here took an integrated approach to describing teleoperator performance and assessed how subjects operating a full-immersion telerobot perform during fine position and gross position tasks. In addition, a Robonaut simulation was also developed as part of this research effort, and experimentally tested against Robonaut itself to determine its utility. Results show that subject performance of teleoperated tasks using both Robonaut and the simulation are virtually identical, with no significant difference between the two. These results indicate that the simulation can be utilized as both a Robonaut training tool, and as a powerful design platform for telepresence displays and aids.

Image Data Processing System (IDAPS) user manual, S-056 experiment. Volume 1: System description. Volume 2: Batch IDAPS. Volume 3: Interactive IDAPS

NASA Technical Reports Server (NTRS)

1975-01-01

Image data processing system (IDAPS) developed to satisfy the image processing requirements of the Skylab S-056 experiment is described. The S-056 experiment was designed to obtain high-resolution photographs of the sun in the far ultraviolet, or soft X-ray, portion of the electromagnetic spectrum. Thirty-five thousand photographs were obtained by the three flights of the program; and, faced with such a massive volume of imagery, the designers of the experiment decided to develop a computer-based system which would reduce the image processing workload. The purpose of the IDAPS User Manual is to give the IDAPS user the necessary information and instructions to effectively utilize the system.

Design, construction, and operation of an actively controlled deep-sea CO2 enrichment experiment using a cabled observatory system

NASA Astrophysics Data System (ADS)

Kirkwood, William J.; Walz, Peter M.; Peltzer, Edward T.; Barry, James P.; Herlien, Robert A.; Headley, Kent L.; Kecy, Chad; Matsumoto, George I.; Maughan, Thom; O'Reilly, Thomas C.; Salamy, Karen A.; Shane, Farley; Brewer, Peter G.

2015-03-01

We describe the design, testing, and performance of an actively controlled deep-sea Free Ocean CO2 Enrichment (dp-FOCE) system for the execution of seafloor experiments relating to the impacts of ocean acidification on natural ecosystems. We used the 880 m deep MARS (Monterey Accelerated Research System) cable site offshore Monterey Bay, California for this work, but the Free Ocean CO2 Enrichment (FOCE) system concept is designed to be scalable and can be modified to be used in a wide variety of ocean depths and locations. The main frame is based on a flume design with active thruster control of flow and a central experimental chamber. The unit was allowed to free fall to the seafloor and connected to the cable node by remotely operated vehicle (ROV) manipulation. For operation at depth we designed a liquid CO2 containment reservoir which provided the CO2 enriched working fluid as ambient seawater was drawn through the reservoir beneath the more buoyant liquid CO2. Our design allowed for the significant lag time associated with the hydration of the dissolved CO2 molecule, resulting in an e-folding time, τ, of 97 s between fluid injection and pH sensing at the mean local T=4.31±0.14 °C and pHT of 7.625±0.011. The system maintained a pH offset of 0.4 pH units compared to the surrounding ocean for a period of 1 month. The unit allows for the emplacement of deep-sea animals for testing. We describe the components and software used for system operation and show examples of each. The demonstrated ability for active control of experimental systems opens new possibilities for deep-sea biogeochemical perturbation experiments of several kinds and our developments in open source control systems software and hardware described here are applicable to this end.

The Good, the Bad, and the Ugly: A Theoretical Framework for the Assessment of Continuous Colormaps.

PubMed

Bujack, Roxana; Turton, Terece L; Samsel, Francesca; Ware, Colin; Rogers, David H; Ahrens, James

2018-01-01

A myriad of design rules for what constitutes a "good" colormap can be found in the literature. Some common rules include order, uniformity, and high discriminative power. However, the meaning of many of these terms is often ambiguous or open to interpretation. At times, different authors may use the same term to describe different concepts or the same rule is described by varying nomenclature. These ambiguities stand in the way of collaborative work, the design of experiments to assess the characteristics of colormaps, and automated colormap generation. In this paper, we review current and historical guidelines for colormap design. We propose a specified taxonomy and provide unambiguous mathematical definitions for the most common design rules.

Preliminary design of the Space Station internal thermal control system

NASA Technical Reports Server (NTRS)

Herrin, Mark T.; Patterson, David W.; Turner, Larry D.

1987-01-01

The baseline preliminary design configuration of the Internal Thermal Control system (ITCS) of the U.S. Space Station pressurized elements (i.e., the Habitation and U.S. Laboratory modules, pressurized logistics carrier, and resources nodes) is defined. The ITCS is composed of both active and passive components. The subsystems which comprise the ITCS are identified and their functional descriptions are provided. The significant trades and analyses, which were performed during Phase B (i.e., the preliminary design phase) that resulted in the design described herein, are discussed. The ITCS interfaces with the station's central Heat Rejection and Transport System (HRTS), other systems, and externally attached pressurized payloads are described. Requirements on the ITCS with regard to redundancy and experiment support are also addressed.

Baseline spacecraft and mission design for the SP-100 flight experiment

NASA Technical Reports Server (NTRS)

Deininger, William D.; Vondra, Robert J.

1989-01-01

The design and performance of a spacecraft employing arcjet nuclear electric propulsion, suitable for use in the SP-100 Space Reactor Power System (SRPS) Flight Experiment, are outlined. The vehicle design is based on a 93 kWe ammonia arcjet system operating at an experimentally-measured specific impulse of 1030 s and an efficiency of 42 percent. The arcjet/gimbal assemblies, power conditioning subsystem, propellant feed system, propulsion system thermal control, spacecraft diagnostic instrumentation, and the telemetry requirements are described. A 100 kWe SRPS is assumed. The total spacecraft mass is baselined at 5675 kg excluding the propellant and propellant feed system. Four mission scenarios are described which are capable of demonstrating the full capability of the SRPS. The missions considered include spacecraft deployment to possible surveillance platform orbits, a spacecraft storage mission and an orbit raising round trip corresponding to possible orbit transfer vehicle missions. Launches from Kennedy Space Center using the Titan IV expendable launch vehicle are assumed.

IN-PILE CORROSION TEST LOOPS FOR AQUEOUS HOMOGENEOUS REACTOR SOLUTIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Savage, H.C.; Jenks, G.H.; Bohlmann, E.G.

1960-12-21

An in-pile corrosion test loop is described which is used to study the effect of reactor radiation on the corrosion of materials of construction and the chemical stability of fuel solutions of interest to the Aqueous Homogeneous Reactor Program at ORNL. Aqueous solutions of uranyl sulfate are circulated in the loop by means of a 5-gpm canned-rotor pump, and the pump loop is designed for operation at temperatures to 300 ts C and pressures to 2000 psia while exposed to reactor radiation in beam-hole facilities of the LITR and ORR. Operation of the first loop in-pile was begun in Octobermore » 1954, and since that time 17 other in-pile loop experiments were completed. Design criteria of the pump loop and its associated auxiliary equipment and instrumentation are described. In-pile operating procedures, safety features, and operating experience are presented. A cost summary of the design, fabrication, and installation of the loop and experimental facillties is also included. (auth)« less

The MSFC UNIVAC 1108 EXEC 8 simulation model

NASA Technical Reports Server (NTRS)

Williams, T. G.; Richards, F. M.; Weatherbee, J. E.; Paul, L. K.

1972-01-01

A model is presented which simulates the MSFC Univac 1108 multiprocessor system. The hardware/operating system is described to enable a good statistical measurement of the system behavior. The performance of the 1108 is evaluated by performing twenty-four different experiments designed to locate system bottlenecks and also to test the sensitivity of system throughput with respect to perturbation of the various Exec 8 scheduling algorithms. The model is implemented in the general purpose system simulation language and the techniques described can be used to assist in the design, development, and evaluation of multiprocessor systems.

Experimental design to evaluate directed adaptive mutation in Mammalian cells.

PubMed

Bordonaro, Michael; Chiaro, Christopher R; May, Tobias

2014-12-09

We describe the experimental design for a methodological approach to determine whether directed adaptive mutation occurs in mammalian cells. Identification of directed adaptive mutation would have profound practical significance for a wide variety of biomedical problems, including disease development and resistance to treatment. In adaptive mutation, the genetic or epigenetic change is not random; instead, the presence and type of selection influences the frequency and character of the mutation event. Adaptive mutation can contribute to the evolution of microbial pathogenesis, cancer, and drug resistance, and may become a focus of novel therapeutic interventions. Our experimental approach was designed to distinguish between 3 types of mutation: (1) random mutations that are independent of selective pressure, (2) undirected adaptive mutations that arise when selective pressure induces a general increase in the mutation rate, and (3) directed adaptive mutations that arise when selective pressure induces targeted mutations that specifically influence the adaptive response. The purpose of this report is to introduce an experimental design and describe limited pilot experiment data (not to describe a complete set of experiments); hence, it is an early report. An experimental design based on immortalization of mouse embryonic fibroblast cells is presented that links clonal cell growth to reversal of an inactivating polyadenylation site mutation. Thus, cells exhibit growth only in the presence of both the countermutation and an inducing agent (doxycycline). The type and frequency of mutation in the presence or absence of doxycycline will be evaluated. Additional experimental approaches would determine whether the cells exhibit a generalized increase in mutation rate and/or whether the cells show altered expression of error-prone DNA polymerases or of mismatch repair proteins. We performed the initial stages of characterizing our system and have limited preliminary data from several pilot experiments. Cell growth and DNA sequence data indicate that we have identified a cell clone that exhibits several suitable characteristics, although further study is required to identify a more optimal cell clone. The experimental approach is based on a quantum biological model of basis-dependent selection describing a novel mechanism of adaptive mutation. This project is currently inactive due to lack of funding. However, consistent with the objective of early reports, we describe a proposed study that has not produced publishable results, but is worthy of report because of the hypothesis, experimental design, and protocols. We outline the project's rationale and experimental design, with its strengths and weaknesses, to stimulate discussion and analysis, and lay the foundation for future studies in this field.

Using Quality Rating Scales for Professional Development: Experiences from the UK

ERIC Educational Resources Information Center

Mathers, Sandra; Linskey, Faye; Seddon, Judith; Sylva, Kathy

2007-01-01

The ECERS-R and ITERS-R are among two of the most widely used observational measures for describing the characteristics of early childhood education and care. This paper describes a professional development programme currently taking place in seven regions across England, designed to train local government staff in the application of the scales as…

National Household Education Surveys of 2003: Data File User's Manual, Volume I. NCES 2004-001

ERIC Educational Resources Information Center

Hagedorn, Mary; Montaquila, Jill; Vaden-Kiernan, Nancy; Kim, Kwang; Chapman, Christopher

2004-01-01

This manual describes the development of the surveys fielded in 2003 under the National Household Education Surveys Program (NHES: 2003). It describes how the questionnaires were designed, how the samples were developed, data collection experiences, and file information needed to analyze the NHES: 2003 data sets. The surveys fielded as part of…

The Difficulties of a Curriculum Helper in an Urban School.

ERIC Educational Resources Information Center

Smith, Michael S.

This paper describes the experiences of a teacher and a curriculum helper in designing and implementing a fifth grade language arts curriculum at an inner city, magnet school in Indianapolis (Indiana). The report describes the work in three phases: (1) making explicit the problems with the previous language arts curriculum; (2) formulating a plan…

Frankie, Stoney and the Last Chance Boys.

ERIC Educational Resources Information Center

Hanners, Chuck

This novel for youth describes the world and experiences of a group of poor inner city junior high school students and their teacher. The students are all in a remedial classroom designed to meet their special needs and led by a dedicated teacher nick-named "Harp On". The central character Frankie describes their school year and particularly the…

Observational Study of Early Childhood Programs. Final Report. Volume I: Life in Preschool.

ERIC Educational Resources Information Center

Layzer, Jean I.; And Others

This study of 119 preschool programs in 5 states was designed to describe the classroom experiences of economically or educationally disadvantaged 4-year-old children and to examine linkages between characteristics of early childhood programs and the activities of the children and teachers in the classroom. Chapters 1 and 2 describe the context…

The Minerva Multi-Microprocessor.

DTIC Science & Technology

A multiprocessor system is described which is an experiment in low cost, extensible, multiprocessor architectures. Global issues such as inclusion of a central bus, design of the bus arbiter, and methods of interrupt handling are considered. The system initially includes two processor types, based on microprocessors, and these are discussed. Methods for reducing processor demand for the central bus are described.

The NOvA Technical Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ayres, D.S.; Drake, G.R.; Goodman, M.C.

Technical Design Report (TDR) describes the preliminary design of the NOvA accelerator upgrades, NOvA detectors, detector halls and detector sites. Compared to the March 2006 and November 2006 NOvA Conceptual Design Reports (CDR), critical value engineering studies have been completed and the alternatives still active in the CDR have been narrowed to achieve a preliminary technical design ready for a Critical Decision 2 review. Many aspects of NOvA described this TDR are complete to a level far beyond a preliminary design. In particular, the access road to the NOvA Far Detector site in Minnesota has an advanced technical design atmore » a level appropriate for a Critical Decision 3a review. Several components of the accelerator upgrade and new neutrino detectors also have advanced technical designs appropriate for a Critical Decision 3a review. Chapter 1 is an Executive Summary with a short description of the NOvA project. Chapter 2 describes how the Fermilab NuMI beam will provide a narrow band beam of neutrinos for NOvA. Chapter 3 gives an updated overview of the scientific basis for the NOvA experiment, focusing on the primary goal to extend the search for {nu}{sub {mu}} {yields} {nu}{sub e} oscillations and measure the sin{sup 2}(2{theta}{sub 13}) parameter. This parameter has not been measured in any previous experiment and NOvA would extend the search by about an order of magnitude beyond the current limit. A secondary goal is to measure the dominant mode oscillation parameters, sin{sup 2}(2{theta}{sub 23}) and {Delta}m{sub 32}{sup 2} to a more precise level than previous experiments. Additional physics goals for NOvA are also discussed. Chapter 4 describes the Scientific Design Criteria which the Fermilab accelerator complex, NOvA detectors and NOvA detector sites must satisfy to meet the physics goals discussed in Chapter 3. Chapter 5 is an overview of the NOvA project. The changes in the design relative to the NOvA CDR are discussed. Chapter 6 summarizes the NOvA design performance relative to the Design Criteria set out in Chapter 4. Chapter 7 presents the Work Breakdown Structure dictionary at Level 3 and the Milestone dictionary. Chapters 8 through 17 then take each Level 2 WBS element of the NOvA project and present each part of the design in more detail than the overview given in Chapter 5. Specific technical design criteria are delineated for each part of the project in addition to the scientific design criteria outlined in Chapter 4. Changes in the design since the NOvA CDR are discussed in detail. The work remaining to bring each part of this preliminary design to a final design is outlined. Appendix A is a guide to other NOvA Project documentation with links to those documents.« less

Saturdays, Summer, and Science.

ERIC Educational Resources Information Center

Zielinski, Edward J.; And Others

1994-01-01

Describes a science program (Saturday Science) designed to provide learning experiences that are thematic and stress critical/creative thinking as well as development of science process skills for elementary, middle, and junior high students. (ZWH)

Alternative Energy Projects in Schools.

ERIC Educational Resources Information Center

Jones, Chris

1981-01-01

Describes a series of experiments which a group of 12- to 14-year-old students developed and conducted as they attempted to design a solar panel. Includes an outline of their building procedures. (DC)

Stepwise Regression Analysis of MDOE Balance Calibration Data Acquired at DNW

NASA Technical Reports Server (NTRS)

DeLoach, RIchard; Philipsen, Iwan

2007-01-01

This paper reports a comparison of two experiment design methods applied in the calibration of a strain-gage balance. One features a 734-point test matrix in which loads are varied systematically according to a method commonly applied in aerospace research and known in the literature of experiment design as One Factor At a Time (OFAT) testing. Two variations of an alternative experiment design were also executed on the same balance, each with different features of an MDOE experiment design. The Modern Design of Experiments (MDOE) is an integrated process of experiment design, execution, and analysis applied at NASA's Langley Research Center to achieve significant reductions in cycle time, direct operating cost, and experimental uncertainty in aerospace research generally and in balance calibration experiments specifically. Personnel in the Instrumentation and Controls Department of the German Dutch Wind Tunnels (DNW) have applied MDOE methods to evaluate them in the calibration of a balance using an automated calibration machine. The data have been sent to Langley Research Center for analysis and comparison. This paper reports key findings from this analysis. The chief result is that a 100-point calibration exploiting MDOE principles delivered quality comparable to a 700+ point OFAT calibration with significantly reduced cycle time and attendant savings in direct and indirect costs. While the DNW test matrices implemented key MDOE principles and produced excellent results, additional MDOE concepts implemented in balance calibrations at Langley Research Center are also identified and described.

Graduate level design - Courses and projects: An untapped resource

NASA Technical Reports Server (NTRS)

Dubrawsky, Ido; Neff, Jon M.; Pinon, Elfego, III; Fowler, Wallace T.

1993-01-01

The authors describe their experiences at a major space engineering university (the University of Texas at Austin) in the use of graduate level design courses and projects to produce information and tools that are of use to undergraduate design classes, graduate students, and industry. The information produced to date includes a spacecraft subsystems information document, a mission design tool (a FORTRAN subroutine library), a series of space mission characterizations, and a set of spacecraft characterizations.

Design of a 500 MJ, 5 MA power supply

NASA Astrophysics Data System (ADS)

Pappas, J. A.; Headifen, G. R.; Weldon, J. M.; Wright, J. C.; Zowarka, R. C.; Aanstoos, T. A.; Kajs, J. H.

1993-01-01

The design of a 500 MJ, 5 MA power supply for rail gun experiments under the Battery Upgraded Supply (BUS) program is examined. About 50,000 12-volt lead acid batteries are required to reach this level. BUS will be required to perform up to two discharges per week. Therefore, BUS is designed to be a low-maintenance, reliable, and fault-tolerant power supply. The design of BUS and the details of its subsystems are described.

The patient experience in community mental health services for older people: a concept mapping approach to support the development of a new quality measure.

PubMed

Wilberforce, Mark; Batten, Eric; Challis, David; Davies, Linda; Kelly, Michael P; Roberts, Chris

2018-06-18

The patient experience is a crucial part of the measurement of service quality. However, instruments to evaluate experiential quality in the community mental health care of older adults are lacking. Before designing a new instrument, clarity is needed about what is to be measured, and how care experiences are articulated by patients. The study aimed to construct a framework to describe older patients' experience of community mental health and social care. Concept mapping blends structured qualitative data collection with quantitative analysis in a mixed method approach. Five activities were undertaken. Patients first identified sentences describing the care experience; a card-sort exercise then grouped these thematically; multidimensional analysis portrayed these data in a map of clusters; interpretation was by patient advisers; finally a new questionnaire was designed. The research involved 22 older people with mental health problems and 29 mental health practitioners, from one region of England. Sixty-seven statements were identified that described the care experience. Analysis of card sort data revealed seven clusters, which were interpreted by patient advisers to the study as: personal qualities and relationships; communication problems; feeling powerless; in-and-out care; bureaucracy; focus on life, not just mental health; and continuity of care. These themes and the component statements were used as a foundation for later work, developing a new measure of the care experience in mental health services for older people. Concept mapping has many strengths as an empirical and participant-driven means for underpinning new measurement instruments. A group of older people identified 67 candidate statements that could act as questionnaire items grouped within seven themes. Future research will establish the psychometric properties of the new measure.

Design calculations for NIF convergent ablator experiments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Callahan, Debra; Leeper, Ramon Joe; Spears, B. K.

2010-11-01

Design calculations for NIF convergent ablator experiments will be described. The convergent ablator experiments measure the implosion trajectory, velocity, and ablation rate of an x-ray driven capsule and are a important component of the U. S. National Ignition Campaign at NIF. The design calculations are post-processed to provide simulations of the key diagnostics: (1) Dante measurements of hohlraum x-ray flux and spectrum, (2) streaked radiographs of the imploding ablator shell, (3) wedge range filter measurements of D-He3 proton output spectra, and (4) GXD measurements of the imploded core. The simulated diagnostics will be compared to the experimental measurements to providemore » an assessment of the accuracy of the design code predictions of hohlraum radiation temperature, capsule ablation rate, implosion velocity, shock flash areal density, and x-ray bang time. Post-shot versions of the design calculations are used to enhance the understanding of the experimental measurements and will assist in choosing parameters for subsequent shots and the path towards optimal ignition capsule tuning.« less

Optimal Design of Calibration Signals in Space-Borne Gravitational Wave Detectors

NASA Technical Reports Server (NTRS)

Nofrarias, Miquel; Karnesis, Nikolaos; Gibert, Ferran; Armano, Michele; Audley, Heather; Danzmann, Karsten; Diepholz, Ingo; Dolesi, Rita; Ferraioli, Luigi; Ferroni, Valerio;

Optimal Design of Calibration Signals in Space Borne Gravitational Wave Detectors

NASA Technical Reports Server (NTRS)

Nofrarias, Miquel; Karnesis, Nikolaos; Gibert, Ferran; Armano, Michele; Audley, Heather; Danzmann, Karsten; Diepholz, Ingo; Dolesi, Rita; Ferraioli, Luigi; Thorpe, James I.

2014-01-01

Future space borne gravitational wave detectors will require a precise definition of calibration signals to ensure the achievement of their design sensitivity. The careful design of the test signals plays a key role in the correct understanding and characterization of these instruments. In that sense, methods achieving optimal experiment designs must be considered as complementary to the parameter estimation methods being used to determine the parameters describing the system. The relevance of experiment design is particularly significant for the LISA Pathfinder mission, which will spend most of its operation time performing experiments to characterize key technologies for future space borne gravitational wave observatories. Here we propose a framework to derive the optimal signals in terms of minimum parameter uncertainty to be injected to these instruments during its calibration phase. We compare our results with an alternative numerical algorithm which achieves an optimal input signal by iteratively improving an initial guess. We show agreement of both approaches when applied to the LISA Pathfinder case.

XDesign: an open-source software package for designing X-ray imaging phantoms and experiments.

PubMed

Ching, Daniel J; Gürsoy, Dogˇa

2017-03-01

The development of new methods or utilization of current X-ray computed tomography methods is impeded by the substantial amount of expertise required to design an X-ray computed tomography experiment from beginning to end. In an attempt to make material models, data acquisition schemes and reconstruction algorithms more accessible to researchers lacking expertise in some of these areas, a software package is described here which can generate complex simulated phantoms and quantitatively evaluate new or existing data acquisition schemes and image reconstruction algorithms for targeted applications.

Developments in Sensitivity Methodologies and the Validation of Reactor Physics Calculations

DOE PAGES

Palmiotti, Giuseppe; Salvatores, Massimo

2012-01-01

The sensitivity methodologies have been a remarkable story when adopted in the reactor physics field. Sensitivity coefficients can be used for different objectives like uncertainty estimates, design optimization, determination of target accuracy requirements, adjustment of input parameters, and evaluations of the representativity of an experiment with respect to a reference design configuration. A review of the methods used is provided, and several examples illustrate the success of the methodology in reactor physics. A new application as the improvement of nuclear basic parameters using integral experiments is also described.

Design of Moisture Content Detection System

NASA Astrophysics Data System (ADS)

Wang, W. C.; Wang, L.

In this paper, a method for measuring the moisture content of grain was presented based on single chip microcomputer and capacitive sensor. The working principle of measuring moisture content is introduced and a concentric cylinder type of capacitive sensor is designed, the signal processing circuits of system are described in details. System is tested in practice and discussions are made on the various factors affecting the capacitive measuring of grain moisture based on the practical experiments, experiment results showed that the system has high measuring accuracy and good controlling capacity.

XDesign: An open-source software package for designing X-ray imaging phantoms and experiments

DOE PAGES

Ching, Daniel J.; Gursoy, Dogˇa

2017-02-21

Here, the development of new methods or utilization of current X-ray computed tomography methods is impeded by the substantial amount of expertise required to design an X-ray computed tomography experiment from beginning to end. In an attempt to make material models, data acquisition schemes and reconstruction algorithms more accessible to researchers lacking expertise in some of these areas, a software package is described here which can generate complex simulated phantoms and quantitatively evaluate new or existing data acquisition schemes and image reconstruction algorithms for targeted applications.

Virtual firm as a role-playing tool for biomedical education.

PubMed

Blagosklonov, Oleg; Soto-Romero, Georges; Guyon, Florent; Courjal, Nadège; Euphrasie, Sebatien; Yahiaoui, Reda; Butterlin, Nadia

2006-01-01

The paper describes design of a role-playing tool based on the experience of the practice firm which allows participants to obtain relevant and practical on-the-job experience. The students played the roles of the employees and the applicants for vacant positions at the virtual firm - a small business specialized in biomedical sector - founded to design the demonstration vehicle for a biomedical device. We found that this innovative concept may be used to improve the young engineers performance and to facilitate their post-graduate integration.

Results from the HARP Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Catanesi, M. G.

2008-02-21

Hadron production is a key ingredient in many aspects of {nu} physics. Precise prediction of atmospheric {nu} fluxes, characterization of accelerator {nu} beams, quantification of {pi} production and capture for {nu}-factory designs, all of these would profit from hadron production measurements. HARP at the CERN PS was the first hadron production experiment designed on purpose to match all these requirements. It combines a large, full phase space acceptance with low systematic errors and high statistics. HARP was operated in the range from 3 GeV to 15 GeV. We briefly describe here the most recent results.

Development of MBA with Specialisation in Sustainable Development: The Experience of Universiti Sains Malaysia

ERIC Educational Resources Information Center

Amran, Azlan; Khalid, Siti Nabiha Abdul; Razak, Dzulkifli Abdul; Haron, Hasnah

2010-01-01

Purpose: The purpose of this paper is to share the experience of the Graduate School of Business at Univeristi Sains Malaysia (USM) in developing the new MBA programme, specialising in sustainable development. Design/methodology/approach: This paper describes the urgency for a source of education for sustainable development, particularly in the…

An Interactive Computer-Aided Instructional Strategy and Assessment Methods for System Identification and Adaptive Control Laboratory

ERIC Educational Resources Information Center

Özbek, Necdet Sinan; Eker, Ilyas

2015-01-01

This study describes a set of real-time interactive experiments that address system identification and model reference adaptive control (MRAC) techniques. In constructing laboratory experiments that contribute to efficient teaching, experimental design and instructional strategy are crucial, but a process for doing this has yet to be defined. This…

Apollo-Soyuz Pamphlet No. 5: The Earth from Orbit. Apollo-Soyuz Experiments in Space.

ERIC Educational Resources Information Center

Page, Lou Williams; Page, Thornton

This booklet is the fifth in a series of nine that describe the Apollo-Soyuz mission and experiments. This set is designed as a curriculum supplement for high school and college teachers, supervisors, curriculum specialists, textbook writers, and the general public. These booklets provide sources of ideas, examples of the scientific method,…

Illustrating the Concepts of Isotopes and Mass Spectrometry in Introductory Courses: A MALDI-TOF Mass Spectrometry Laboratory Experiment

ERIC Educational Resources Information Center

Dopke, Nancy Carter; Lovett, Timothy Neal

2007-01-01

Mass spectrometry is a widely used and versatile tool for scientists in many different fields. Soft ionization techniques such as matrix-assisted laser desorption/ionization (MALDI) allow for the analysis of biomolecules, polymers, and clusters. This article describes a MALDI mass spectrometry experiment designed for students in introductory…

Learning a Generative Probabilistic Grammar of Experience: A Process-Level Model of Language Acquisition

ERIC Educational Resources Information Center

Kolodny, Oren; Lotem, Arnon; Edelman, Shimon

2015-01-01

We introduce a set of biologically and computationally motivated design choices for modeling the learning of language, or of other types of sequential, hierarchically structured experience and behavior, and describe an implemented system that conforms to these choices and is capable of unsupervised learning from raw natural-language corpora. Given…

eWorkbooks for Mathematics: Mapping the Independent Learning Experiences of Elementary Students with Learning Disabilities

ERIC Educational Resources Information Center

Kaczorowski, Tara; Raimondi, Sharon

2014-01-01

In this paper, we describe a small case study exploring how four elementary students with mathematics learning disabilities utilized mobile technology (the eWorkbook) during core math instruction in a general education setting. The lead author designed the eWorkbook intervention to provide a flexible learning experience optimized for diverse…

Ring-Closing Metathesis: An Advanced Guided-Inquiry Experiment for the Organic Laboratory

ERIC Educational Resources Information Center

Schepmann, Hala G.; Mynderse, Michelle

2010-01-01

The design and implementation of an advanced guided-inquiry experiment for the organic laboratory is described. Grubbs's second-generation catalyst is used to effect the ring-closing metathesis of diethyl diallylmalonate. The reaction is carried out under an inert atmosphere at room temperature and monitored by argentic TLC. The crude reaction is…

On Levels of Awareness of Objects in Infants and Students Thereof.

ERIC Educational Resources Information Center

Gratch, Gerald

This paper describes a series of longitudinal experiments which dealt with the development of object awareness in infants, ages 6-18 months. The experiments were designed to document and evaluate Piaget's account of this development. The studies focused on two types of phenomena: (1) when infants first find an object hidden in one place, they will…

Introducing Educational Technologies to Teachers: Experience Report

ERIC Educational Resources Information Center

Thota, Neena; Negreiros, Joao G. M.

2015-01-01

The dramatic rise in use of digital media has changed the way learning is taking place and has led to new ways to teach with digital technologies. In this article, we describe the experiences of teaching a course that introduces educational technologies to teachers in Macau. The course design is based on connectivism, a learning theory for the…