Capturing how age-friendly communities foster positive health, social participation and health equity: a study protocol of key components and processes that promote population health in aging Canadians.

PubMed

Levasseur, Mélanie; Dubois, Marie-France; Généreux, Mélissa; Menec, Verena; Raina, Parminder; Roy, Mathieu; Gabaude, Catherine; Couturier, Yves; St-Pierre, Catherine

2017-05-25

To address the challenges of the global aging population, the World Health Organization promoted age-friendly communities as a way to foster the development of active aging community initiatives. Accordingly, key components (i.e., policies, services and structures related to the communities' physical and social environments) should be designed to be age-friendly and help all aging adults to live safely, enjoy good health and stay involved in their communities. Although age-friendly communities are believed to be a promising way to help aging Canadians lead healthy and active lives, little is known about which key components best foster positive health, social participation and health equity, and their underlying mechanisms. This study aims to better understand which and how key components of age-friendly communities best foster positive health, social participation and health equity in aging Canadians. Specifically, the research objectives are to: 1) Describe and compare age-friendly key components of communities across Canada 2) Identify key components best associated with positive health, social participation and health equity of aging adults 3) Explore how these key components foster positive health, social participation and health equity METHODS: A mixed-method sequential explanatory design will be used. The quantitative part will involve a survey of Canadian communities and secondary analysis of cross-sectional data from the Canadian Longitudinal Study on Aging (CLSA). The survey will include an age-friendly questionnaire targeting key components in seven domains: physical environment, housing options, social environment, opportunities for participation, community supports and healthcare services, transportation options, communication and information. The CLSA is a large, national prospective study representative of the Canadian aging population designed to examine health transitions and trajectories of adults as they age. In the qualitative part, a multiple case study will be conducted in five Canadian communities performing best on positive health, social participation and health equity. Building on new and existing collaborations and generating evidence from real-world interventions, the results of this project will help communities to promote age-friendly policies, services and structures which foster positive health, social participation and health equity at a population level.

First Steps to School Readiness: South Carolina's Response to At-Risk Early Childhood Population.

ERIC Educational Resources Information Center

Buford, Rhonda; Stegelin, Dolores A.

2003-01-01

Describes South Carolina's new state early childhood program, First Steps to School Readiness. Includes a profile of the state's at-risk child population, noting poverty and education risk indicators, and describing key program components. The article discusses program oversight, local program partnerships, program funding mechanisms, and local…

The Components of Effective Teacher Training in the Use of Three-Dimensional Immersive Virtual Worlds for Learning and Instruction Purposes: A Literature Review

ERIC Educational Resources Information Center

Nussli, Natalie; Oh, Kevin

2014-01-01

The overarching question that guides this review is to identify the key components of effective teacher training in virtual schooling, with a focus on three-dimensional (3D) immersive virtual worlds (IVWs). The process of identifying the essential components of effective teacher training in the use of 3D IVWs will be described step-by-step. First,…

Research and development of improved geothermal well logging techniques, tools and components (current projects, goals and status). Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamers, M.D.

One of the key needs in the advancement of geothermal energy is availability of adequate subsurface measurements to aid the reservoir engineer in the development and operation of geothermal wells. Some current projects being sponsored by the U. S. Department of Energy's Division of Geothermal Energy pertaining to the development of improved well logging techniques, tools and components are described. An attempt is made to show how these projects contribute to improvement of geothermal logging technology in forming key elements of the overall program goals.

Clean Energy Financing Programs: A Decision Resource for States and Communities

EPA Pesticide Factsheets

Describes financing-program options, key components of financing programs, and factors for states and communities to consider as they make decisions about getting started or updating their clean energy financing programs.

Life-cycle management: a long-term challenge.

PubMed

Newman, Chris

2003-04-01

With some electronics components being withdrawn after only two years, life-cycle management is becoming a key strategic issue for users and manufacturers of electromedical equipment. This article describes some approaches to tackling the challenge.

Conservation systems in the Southeast

USDA-ARS?s Scientific Manuscript database

This presentation describes how conservation systems that include non-inversion tillage and cover crops, a key component of conservation systems, are managed in the Southeast to maximize benefits. Benefits include weed suppression, moisture conservation, and increased organic matter contents. Mana...

Evolving Systems: Adaptive Key Component Control and Inheritance of Passivity and Dissipativity

NASA Technical Reports Server (NTRS)

Frost, S. A.; Balas, M. J.

2010-01-01

We propose a new framework called Evolving Systems to describe the self-assembly, or autonomous assembly, of actively controlled dynamical subsystems into an Evolved System with a higher purpose. Autonomous assembly of large, complex flexible structures in space is a target application for Evolving Systems. A critical requirement for autonomous assembling structures is that they remain stable during and after assembly. The fundamental topic of inheritance of stability, dissipativity, and passivity in Evolving Systems is the primary focus of this research. In this paper, we develop an adaptive key component controller to restore stability in Nonlinear Evolving Systems that would otherwise fail to inherit the stability traits of their components. We provide sufficient conditions for the use of this novel control method and demonstrate its use on an illustrative example.

Targeting inflammation in pancreatic cancer: Clinical translation

PubMed Central

Steele, Colin William; Kaur Gill, Nina Angharad; Jamieson, Nigel Balfour; Carter, Christopher Ross

2016-01-01

Preclinical modelling studies are beginning to aid development of therapies targeted against key regulators of pancreatic cancer progression. Pancreatic cancer is an aggressive, stromally-rich tumor, from which few people survive. Within the tumor microenvironment cellular and extracellular components exist, shielding tumor cells from immune cell clearance, and chemotherapy, enhancing progression of the disease. The cellular component of this microenvironment consists mainly of stellate cells and inflammatory cells. New findings suggest that manipulation of the cellular component of the tumor microenvironment is possible to promote immune cell killing of tumor cells. Here we explore possible immunogenic therapeutic strategies. Additionally extracellular stromal elements play a key role in protecting tumor cells from chemotherapies targeted at the pancreas. We describe the experimental findings and the pitfalls associated with translation of stromally targeted therapies to clinical trial. Finally, we discuss the key inflammatory signal transducers activated subsequent to driver mutations in oncogenic Kras in pancreatic cancer. We present the preclinical findings that have led to successful early trials of STAT3 inhibitors in pancreatic adenocarcinoma. PMID:27096033

Cyber Warfare: Protecting Military Systems

DTIC Science & Technology

2000-01-01

Software is a key component in nearly every critical system used by the Department of Defense. Attacking the software in a system- cyber warfare - is a...revolutionary method of pursuing war. This article describes various cyber warfare approaches and suggests methods to counter them.

A Theoretical Rationale for Using the Individualized Meaning-Centered Approach to Braille Literacy Education with Students Who Have Mild to Moderate Cognitive Disabilities

ERIC Educational Resources Information Center

Wormsley, Diane P.

2011-01-01

This article describes the components of the Individualized Meaning-centered Approach to Braille Literacy Education (I-M-ABLE) for teaching braille reading and writing to students who are blind and have additional cognitive impairments. The components of I-M-ABLE are: (1) selecting and teaching the Key Vocabulary; (2) teaching the efficient use of…

Modelling Creativity: Identifying Key Components through a Corpus-Based Approach.

PubMed

Jordanous, Anna; Keller, Bill

2016-01-01

Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research.

System of end-to-end symmetric database encryption

NASA Astrophysics Data System (ADS)

Galushka, V. V.; Aydinyan, A. R.; Tsvetkova, O. L.; Fathi, V. A.; Fathi, D. V.

2018-05-01

The article is devoted to the actual problem of protecting databases from information leakage, which is performed while bypassing access control mechanisms. To solve this problem, it is proposed to use end-to-end data encryption, implemented at the end nodes of an interaction of the information system components using one of the symmetric cryptographic algorithms. For this purpose, a key management method designed for use in a multi-user system based on the distributed key representation model, part of which is stored in the database, and the other part is obtained by converting the user's password, has been developed and described. In this case, the key is calculated immediately before the cryptographic transformations and is not stored in the memory after the completion of these transformations. Algorithms for registering and authorizing a user, as well as changing his password, have been described, and the methods for calculating parts of a key when performing these operations have been provided.

Component improvement of free-piston Stirling engine key technology for space power

NASA Technical Reports Server (NTRS)

Alger, Donald L.

1988-01-01

The successful performance of the 25 kW Space Power Demonstrator (SPD) engine during an extensive testing period has provided a baseline of free piston Stirling engine technology from which future space Stirling engines may evolve. Much of the success of the engine was due to the initial careful selection of engine materials, fabrication and joining processes, and inspection procedures. Resolution of the few SPD engine problem areas that did occur has resulted in the technological advancement of certain key free piston Stirling engine components. Derivation of two half-SPD, single piston engines from the axially opposed piston SPD engine, designated as Space Power Research (SPR) engines, has made possible the continued improvement of these engine components. The two SPR engines serve as test bed engines for testing of engine components. Some important fabrication and joining processes are reviewed. Also, some component deficiencies that were discovered during SPD engine testing are described and approaches that were taken to correct these deficiencies are discussed. Potential component design modifications, based upon the SPD and SPR engine testing, are also reported.

Respective Role of the Dorsal Hippocampus and the Entorhinal Cortex during the Recombination of Previously Learned Olfactory-Tactile Associations in the Rat

ERIC Educational Resources Information Center

Boisselier, Lise; Ferry, Barbara; Gervais, Rémi

2017-01-01

The hippocampal formation has been extensively described as a key component for object recognition in conjunction with place and context. The present study aimed at describing neural mechanisms in the hippocampal formation that support olfactory-tactile (OT) object discrimination in a task where space and context were not taken into account. The…

Identifying Patterns in Implementation of Hospital Pressure Ulcer Prevention Programs: A Multisite Qualitative Study.

PubMed

Soban, Lynn M; Finley, Erin P; Miltner, Rebecca S

2016-01-01

To describe the presence or absence of key components of hospital pressure ulcer (PU) prevention programs in 6 acute care hospitals. Multisite comparative case study. Using purposeful selection based on PU rates (high vs low) and hospital size, 6 hospitals within the Veterans Health Administration health care system were invited to participate. Key informant interviews (n = 48) were conducted in each of the 6 participating hospitals among individuals playing key roles in PU prevention: senior nursing leadership (n = 9), nurse manager (n = 7), wound care specialist (n = 6), frontline RNs (n = 26). Qualitative data were collected during face-to-face, semistructured interviews. Interview protocols were tailored to each interviewee's role with a core set of common questions covering 3 major content areas: (1) practice environment (eg, policies and wound care specialists), (2) current prevention practices (eg, conduct of PU risk assessment and skin inspection), and (3) barriers to PU prevention. We conducted structured coding of 5 key components of PU prevention programs and cross-case analysis to identify patterns in operationalization and implementation of program components across hospitals based on facility size and PU rates (low vs high). All hospitals had implemented all PU prevention program components. Component operationalization varied considerably across hospitals. Wound care specialists were integral to the operationalization of the 4 other program components examined; however, staffing levels and work assignments of wound care specialists varied widely. Patterns emerged among hospitals with low and high PU rates with respect to wound care specialist staffing, data monitoring, and staff education. We found hospital-level variations in PU prevention programs. Wound care specialist staffing may represent a potential point of leverage in achieving other PU program components, particularly performance monitoring and staff education.

Staff Development in Problem-based Learning.

ERIC Educational Resources Information Center

Murray, Ian; Savin-Baden, Maggi

2000-01-01

Argues that, for problem-based learning (PBL) to succeed, a sound program of staff development is required and describes the introduction of PBL into Nursing and Midwifery curricula at the University of Dundee (Scotland) including key components and evaluatory evidence to support its efficacy. (DB)

"Dateline NBC"'s Persuasive Attack on Wal-Mart.

ERIC Educational Resources Information Center

Benoit, William L.; Dorries, Bruce

1996-01-01

Develops a typology of persuasive attack strategies. Identifies two key components of persuasive attack: responsibility and offensiveness. Describes several strategies for intensifying each of these elements. Applies this analysis to "Dateline NBC"'s allegations that Wal-Mart's "Buy American" campaign was deceptive. Concludes…

Development of structural ceramic components for automobile applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawamoto, H.

1995-12-01

Development efforts have been made in automobile technologies on heat engines to improve the power performance, the fuel economy, and so on. It is well recognized that ceramic applications are keys to succeed in such advanced heat engines, because of their good mechanical and thermal properties. This paper discusses present automobile applications of structural ceramic components and the expectations in automobile uses. The strength and reliability of mass-produced components for the engines are described with the manufacturing processes. The future R&D directions are recommended for structural ceramics.

The pillars of well-constructed simulated patient programs: A qualitative study with experienced educators.

PubMed

Pritchard, Shane A; Blackstock, Felicity C; Keating, Jennifer L; Nestel, Debra

2017-11-01

The inclusion of simulated patients (SPs) in health professional education is growing internationally. However, there is limited evidence for best practice in SP methodology. This study investigated how experienced SP educators support SPs in providing SP-based education for health professional students. Experienced SP educators were identified via relevant professional associations, peer-reviewed publications, and peer referral. Semi-structured individual interviews were conducted via telephone. Data were analyzed independently by three researchers using principles of inductive thematic analysis. Four themes were identified that represent the key structural components of SP programs considered by educators seeking to optimize learning for health professional students in SP programs: managing SPs by operationalizing an effective program, selecting SPs by rigorously screening for suitability, preparing SPs by educating for a specific scenario, and directing SPs by leading safe and meaningful interactions. Within these components, subthemes were described, with considerable variation in approaches. Key structural components to SP programs were consistently described by experienced SP educators who operationalize them. A framework has been proposed to assist educators in designing high-quality SP programs that support SPs and learners. Future research is required to evaluate and refine this framework and other evidence-based resources for SP educators.

Meaningful and Purposeful Practice

ERIC Educational Resources Information Center

Clementi, Donna

2014-01-01

This article describes a graphic, designed by Clementi and Terrill, the authors of "Keys to Planning for Learning" (2013), visually representing the components that contribute to meaningful and purposeful practice in learning a world language, practice that leads to greater proficiency. The entire graphic is centered around the letter…

The Changing Shape of Technology on Campus from Ermergence to Convergence.

ERIC Educational Resources Information Center

Cunningham, Kevin; Rainey, Sylvia

2001-01-01

Explores the basics in technology convergence in making today's college and university campuses more "intelligent." Two key components required for effective technology convergence are described as are the benefits of convergence on campus safety and security and utility cost management. (GR)

Spin-Multiplet Components and Energy Splittings by Multistate Density Functional Theory.

PubMed

Grofe, Adam; Chen, Xin; Liu, Wenjian; Gao, Jiali

2017-10-05

Kohn-Sham density functional theory has been tremendously successful in chemistry and physics. Yet, it is unable to describe the energy degeneracy of spin-multiplet components with any approximate functional. This work features two contributions. (1) We present a multistate density functional theory (MSDFT) to represent spin-multiplet components and to determine multiplet energies. MSDFT is a hybrid approach, taking advantage of both wave function theory and density functional theory. Thus, the wave functions, electron densities and energy density-functionals for ground and excited states and for different components are treated on the same footing. The method is illustrated on valence excitations of atoms and molecules. (2) Importantly, a key result is that for cases in which the high-spin components can be determined separately by Kohn-Sham density functional theory, the transition density functional in MSDFT (which describes electronic coupling) can be defined rigorously. The numerical results may be explored to design and optimize transition density functionals for configuration coupling in multiconfigurational DFT.

MaizeGDB - Past, present, and future

USDA-ARS?s Scientific Manuscript database

The Maize Genetics and Genomics Database (MaizeGDB) turns 20 this year. This editorial outlines MaizeGDB's history and connection to the Maize Genetics Cooperation, describes key components of how the MaizeGDB interface will be completely redesigned over the course of the next two years to meet cur...

CTEPP STANDARD OPERATING PROCEDURE FOR PROCESSING COMPLETED DATA FORMS (SOP-4.10)

EPA Science Inventory

This SOP describes the methods for processing completed data forms. Key components of the SOP include (1) field editing, (2) data form Chain-of-Custody, (3) data processing verification, (4) coding, (5) data entry, (6) programming checks, (7) preparation of data dictionaries, cod...

Why Does Experimentation Matter in Teaching Ecology?

ERIC Educational Resources Information Center

Finn, Hugh; Maxwell, Marika; Calver, Michael

2002-01-01

Suggests that because controlled experiments are used extensively by professional ecologists to solve both theoretical and applied problems, experimentation should be a key component of secondary school ecology curricula. Describes five teaching principles to guide secondary school biology teachers in providing a more realistic view of the…

Modelling Creativity: Identifying Key Components through a Corpus-Based Approach

PubMed Central

2016-01-01

Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research. PMID:27706185

Mechanisms of fibrosis: therapeutic translation for fibrotic disease

PubMed Central

Wynn, Thomas A; Ramalingam, Thirumalai R

2012-01-01

Fibrosis is a pathological feature of most chronic inflammatory diseases. Fibrosis, or scarring, is defined by the accumulation of excess extracellular matrix components. If highly progressive, the fibrotic process eventually leads to organ malfunction and death. Fibrosis affects nearly every tissue in the body. Here we discuss how key components of the innate and adaptive immune response contribute to the pathogenesis of fibrosis. We also describe how cell-intrinsic changes in important structural cells can perpetuate the fibrotic response by regulating the differentiation, recruitment, proliferation and activation of extracellular matrix–producing myofibroblasts. Finally, we highlight some of the key mechanisms and pathways of fibrosis that are being targeted as potential therapies for a variety of important human diseases. PMID:22772564

Productive Mathematical Noticing: What It Is and Why It Matters

ERIC Educational Resources Information Center

Choy, Ban Heng

2013-01-01

Teacher mathematical noticing is a key component of mathematics teaching expertise and has been a focus of recent professional development efforts. In this paper, I propose and describe explicitly the notion of "productive" mathematical noticing, which surfaces from a case study involving a group of seven mathematics teachers who…

An Innovative School-Based Intervention to Promote Healthy Lifestyles

ERIC Educational Resources Information Center

Piana, Natalia; Ranucci, Claudia; Buratta, Livia; Foglia, Elena; Fabi, Marta; Novelli, Francesca; Casucci, Simone; Reginato, Elisa; Pippi, Roberto; Aiello, Cristina; Leonardi, Alessia; Romani, Giannermete; De Feo, Pierpaolo; Mazzeschi, Claudia

2017-01-01

Objective: To describe an innovative school-based intervention to promote healthy lifestyles. To evaluate its effects on children's food habits and to highlight the key components which contribute most to the beneficial effects obtained from children's, teachers' and parents' perspectives. Design: An educational tool to improve personal awareness,…

A Signature Pedagogy for Leadership Education: Preparing Principals through Participatory Action Research

ERIC Educational Resources Information Center

Sappington, Neil; Baker, Paul J.; Gardner, Dianne; Pacha, Joe

2010-01-01

This study proposes participatory action research as a signature pedagogy for principal preparation programs. Signature pedagogies bring professional knowledge and core values together in distinctive teaching and learning arrangements. A rationale and learning results are presented that describe key components of action research intended to help…

School Empowerment Surges Ahead in 2007-2008

ERIC Educational Resources Information Center

Snell, Lisa

2008-01-01

School empowerment and weighted student formula programs continue to grow across the United States. This article explores the key components of school empowerment programs and describes several existing programs from Baltimore to San Francisco. The article examines some of the anecdotal outcomes for these types of public school choice programs.…

Undergraduate Research in the Dartmouth Economics Department

ERIC Educational Resources Information Center

Feyrer, James

2017-01-01

One of the key components to the undergraduate research enterprise at Dartmouth is the recognition that learning to do research requires both directed instruction and learning by doing. The economics faculty have tailored a fruitful undergraduate research program based on this philosophy, and this article describes these efforts while also…

Profiles of Schools in Change: Four Urban High Schools.

ERIC Educational Resources Information Center

Wermuth, Thomas R.; And Others

1997-01-01

This report highlights four urban comprehensive secondary schools that are developing, implementing, and evaluating reform initiatives that include vocational and technical education as a key component of these efforts. Efforts of these four high schools are described: Bryan High School, Omaha, Nebraska; Humboldt Secondary Complex, St. Paul,…

Overview of FIREMEN program at Ames Research Center

NASA Technical Reports Server (NTRS)

Kourtides, D. A.

1978-01-01

The Ames Firemen Program is described. The key elements of the program include: (1) the development and evaluation of aircraft interior composite panels; (2) the thermochemical and flammability characterization of thermoset and thermoplastic resins; and (3) the evolution of fire resist aircraft seat components. The first two elements are presented.

Creating Sanctuaries for Latino Immigrant Families.

ERIC Educational Resources Information Center

Goldfarb, Katia Paz

1998-01-01

Explores schools' potential function as sanctuaries for immigrant families. Describes Grupo de Padres, a group formed by Latino immigrant families in an elementary school located in a low-income, migrational point-of-entry neighborhood. Interviews disclosed key physical and social components for a safe environment and the need for meaningful…

Self-Regulation and Academic Achievement in Elementary School Children

ERIC Educational Resources Information Center

McClelland, Megan M.; Cameron, Claire E.

2011-01-01

Self-regulation is a key construct in children's healthy and adaptive development. In this chapter, the authors situate self-regulation in a theoretical context that describes its underlying components that are most important for early school success: flexible attention, working memory, and inhibitory control. The authors review evidence that…

School Site Strategic Planning To Improve District Performance.

ERIC Educational Resources Information Center

Lytle, James H.

This paper describes the evolution of a school-based planning model that accommodates independent approaches to School District of Philadelphia goals. The description centers on key strategic planning decisions made during a 6-year period and three components of the planning model: the organizational monitoring and feedback system; organizational…

Statewide System Change in Positive Behavior Support.

ERIC Educational Resources Information Center

Rotholz, David A.; Ford, Michele E.

2003-01-01

This article describes the development of statewide system change in positive behavior support being implemented by the South Carolina Department of Disabilities and Special Needs in collaboration with the University of South Carolina. Key areas discussed include the impetus for change, the development process, plan components, capacity building,…

Testing a Conceptual Change Model Framework for Visual Data

ERIC Educational Resources Information Center

Finson, Kevin D.; Pedersen, Jon E.

2015-01-01

An emergent data analysis technique was employed to test the veracity of a conceptual framework constructed around visual data use and instruction in science classrooms. The framework incorporated all five key components Vosniadou (2007a, 2007b) described as existing in a learner's schema: framework theory, presuppositions, conceptual domains,…

The Creative Curriculum for Infants and Toddlers.

ERIC Educational Resources Information Center

Dombro, Amy Laura; And Others

Stemming from the core idea that infant and toddler care should be based on building relationships, this curriculum provides a foundation for staff development. Section 1, "Why a Curriculum for Infants and Toddlers?" examines key quality indicators; discusses curriculum components; describes how to use it to make decisions throughout a…

Recent Developments in Microsystems Fabricated by the Liga-Technique

NASA Technical Reports Server (NTRS)

Schulz, J.; Bade, K.; El-Kholi, A.; Hein, H.; Mohr, J.

1995-01-01

As an example of microsystems fabricated by the LIGA-technique (x-ray lithography, electroplating and molding), three systems are described and characterized: a triaxial acceleration sensor system, a micro-optical switch, and a microsystem for the analysis of pollutants. The fabrication technologies are reviewed with respect to the key components of the three systems: an acceleration sensor, and electrostatic actuator, and a spectrometer made by the LIGA-technique. Aa micro-pump and micro-valve made by using micromachined tools for molding and optical fiber imaging are made possible by combining LIGA and anisotropic etching of silicon in a batch process. These examples show that the combination of technologies and components is the key to complex microsystems. The design of such microsystems will be facilitated is standardized interfaces are available.

ATR NSUF Instrumentation Enhancement Efforts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joy L. Rempe; Mitchell K. Meyer; Darrell L. Knudson

A key component of the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) effort is to expand instrumentation available to users conducting irradiation tests in this unique facility. In particular, development of sensors capable of providing real-time measurements of key irradiation parameters is emphasized because of their potential to increase data fidelity and reduce posttest examination costs. This paper describes the strategy for identifying new instrumentation needed for ATR irradiations and the program underway to develop and evaluate new sensors to address these needs. Accomplishments from this program are illustrated by describing new sensors now available to users ofmore » the ATR NSUF. In addition, progress is reported on current research efforts to provide improved in-pile instrumentation to users.« less

Early Intervention Practices in China: Present Situation and Future Directions

ERIC Educational Resources Information Center

Hu, Xiaoyi; Yang, Xijie

2013-01-01

Early intervention services to young children with developmental delays in China have experienced significant growth since 1978, the beginning of the period of Reform and Opening. This article described the present situation of early intervention practices in mainland China, framed around the key components and guiding principles of Guralnick's…

Preventive Maintenance Study: A Key Component in Engineering Education to Enhance Industrial Productivity and Competitiveness.

ERIC Educational Resources Information Center

Nachlas, Joel A.; Cassady, C. Richard

1999-01-01

Suggests that a chief contributor to the continued economic success of the western economies will be the productivity gains available through efficient preventative maintenance planning and argues for appropriate changes in engineering curricula. Describes the formulation of maintenance planning problems and illustrates with numerical examples the…

Supporting Students with Health Needs in Schools: An Overview of Selected Health Conditions.

ERIC Educational Resources Information Center

DePaepe, Paris; Garrison-Kane, Linda; Doelling, Jane

2002-01-01

This article discusses key components relevant to providing appropriate services for students with health care needs, reviews common health conditions in school-aged children and youth and recommended medical management, and describes school health care needs and related accommodations that may be made for students with each condition. (Contains…

Classroom Strategies Coaching Model: Integration of Formative Assessment and Instructional Coaching

ERIC Educational Resources Information Center

Reddy, Linda A.; Dudek, Christopher M.; Lekwa, Adam

2017-01-01

This article describes the theory, key components, and empirical support for the Classroom Strategies Coaching (CSC) Model, a data-driven coaching approach that systematically integrates data from multiple observations to identify teacher practice needs and goals, design practice plans, and evaluate progress towards goals. The primary aim of the…

A Web-Based Tool to Support Data-Based Early Intervention Decision Making

ERIC Educational Resources Information Center

Buzhardt, Jay; Greenwood, Charles; Walker, Dale; Carta, Judith; Terry, Barbara; Garrett, Matthew

2010-01-01

Progress monitoring and data-based intervention decision making have become key components of providing evidence-based early childhood special education services. Unfortunately, there is a lack of tools to support early childhood service providers' decision-making efforts. The authors describe a Web-based system that guides service providers…

An Analysis of Communication as a Key Component in Leadership with Diverse School Populations

ERIC Educational Resources Information Center

Cagle, Jo E.; Wiley, Sandy T.

2012-01-01

"Effective Communication as an Essential Element of Leaders with Diverse School Populations" describes a problem based learning project focused on issues related to practices used by principals to address diverse school populations. The team found that communication between principals and diverse populations in schools was a challenge.…

Design Principles for Computer-Assisted Instruction in Histology Education: An Exploratory Study

ERIC Educational Resources Information Center

Deniz, Hasan; Cakir, Hasan

2006-01-01

The purpose of this paper is to describe the development process and the key components of a computer-assisted histology material. Computer-assisted histology material is designed to supplement traditional histology education in a large Midwestern university. Usability information of the computer-assisted instruction (CAI) material was obtained…

The 2011 Chilean Student Movement against Neoliberal Educational Policies

ERIC Educational Resources Information Center

Bellei, Cristián; Cabalin, Cristian; Orellana, Víctor

2014-01-01

This paper analyses the 2011 Chilean student movement, the most relevant social mobilisation in Chile since the restoration of democracy in 1990. Based on available material and secondary sources, it describes the main features of this student movement, analyses the key components of the students' discourse and its relationship with the Chilean…

Using Poetry and the Visual Arts to Develop Emotional Intelligence

ERIC Educational Resources Information Center

Morris, J. Andrew; Urbanski, John; Fuller, Janice

2005-01-01

This article presents a series of experiential exercises designed to use visual arts and poetry in classroom settings to increase students' awareness and recognition of emotion--two key components of emotional intelligence. Drawing on the liberal arts in the manner described in the exercises provides the instructor with a context in which students…

Academic Advising: Organizing and Delivering Services for Student Success. New Directions for Community Colleges, Number 82.

ERIC Educational Resources Information Center

King, Margaret C., Ed.

1993-01-01

Offering new perspectives on academic advising in community colleges, this book defines developmental academic advising, describes the organization and delivery of advising services, and discusses key components of effective programs. The following 10 chapters are included: (1) "Developmental Academic Advising," by Thaddeus M. Raushi,…

The Rise of Online Learning

ERIC Educational Resources Information Center

Umpstead, Bruce

2009-01-01

This article discusses the rise of online learning and describes how educators in Michigan are doing their part to harness the power of online learning to transform today's high school students into lifelong learners, a key component of students' long-term success in the global economy. The author urges schools to prepare for the growing demand in…

Minnesota 4-H Youth Program Quality Improvement Model

ERIC Educational Resources Information Center

Herman, Margo; Grant, Samantha

2015-01-01

The University of Minnesota Extension Center for Youth Development made an organizational decision in 2011 to invest in a system-wide approach to implement youth program quality into the 4-H program using the Youth Program Quality Assessment (YPQA) tool. This article describes the four key components to the Minnesota Youth Program Quality…

Evaluating filterability of different types of sludge by statistical analysis: The role of key organic compounds in extracellular polymeric substances.

PubMed

Xiao, Keke; Chen, Yun; Jiang, Xie; Zhou, Yan

2017-03-01

An investigation was conducted for 20 different types of sludge in order to identify the key organic compounds in extracellular polymeric substances (EPS) that are important in assessing variations of sludge filterability. The different types of sludge varied in initial total solids (TS) content, organic composition and pre-treatment methods. For instance, some of the sludges were pre-treated by acid, ultrasonic, thermal, alkaline, or advanced oxidation technique. The Pearson's correlation results showed significant correlations between sludge filterability and zeta potential, pH, dissolved organic carbon, protein and polysaccharide in soluble EPS (SB EPS), loosely bound EPS (LB EPS) and tightly bound EPS (TB EPS). The principal component analysis (PCA) method was used to further explore correlations between variables and similarities among EPS fractions of different types of sludge. Two principal components were extracted: principal component 1 accounted for 59.24% of total EPS variations, while principal component 2 accounted for 25.46% of total EPS variations. Dissolved organic carbon, protein and polysaccharide in LB EPS showed higher eigenvector projection values than the corresponding compounds in SB EPS and TB EPS in principal component 1. Further characterization of fractionized key organic compounds in LB EPS was conducted with size-exclusion chromatography-organic carbon detection-organic nitrogen detection (LC-OCD-OND). A numerical multiple linear regression model was established to describe relationship between organic compounds in LB EPS and sludge filterability. Copyright © 2016 Elsevier Ltd. All rights reserved.

A comparative analysis of loop heat pipe based thermal architectures for spacecraft thermal control

NASA Technical Reports Server (NTRS)

Pauken, Mike; Birur, Gaj

2004-01-01

Loop Heat Pipes (LHP) have gained acceptance as a viable means of heat transport in many spacecraft in recent years. However, applications using LHP technology tend to only remove waste heat from a single component to an external radiator. Removing heat from multiple components has been done by using multiple LHPs. This paper discusses the development and implementation of a Loop Heat Pipe based thermal architecture for spacecraft. In this architecture, a Loop Heat Pipe with multiple evaporators and condensers is described in which heat load sharing and thermal control of multiple components can be achieved. A key element in using a LHP thermal architecture is defining the need for such an architecture early in the spacecraft design process. This paper describes an example in which a LHP based thermal architecture can be used and how such a system can have advantages in weight, cost and reliability over other kinds of distributed thermal control systems. The example used in this paper focuses on a Mars Rover Thermal Architecture. However, the principles described here are applicable to Earth orbiting spacecraft as well.

Protein requirements for long term missions

NASA Astrophysics Data System (ADS)

Stein, T. P.

1994-11-01

A key component of the diet for a space mission is protein. This first part of this paper reviews the reasons for emphasizing protein nutrition and then discusses what the requirements are likely to be. The second part discusses potential advantages of modifying these requirements and describes potential approaches to effecting these modifications based on well established ground based models.

Evaluation of the Implementation of Operations and Maintenance Programs in New Jersey Schools.

ERIC Educational Resources Information Center

Kominsky, John R.; Freyberg, Ronald W.; Gerber, Donald R.; Centifonti, Gary J.

All schools are required to develop and implement an asbestos management plan (AMP). The key component of this plan is each school's operations and maintenance (O&M) program. This report outlines the importance of such programs. It describes an O&M program as an administrative framework that prescribes specific activities and work…

Examination of roundwood utilization rates in West Virginia

Treesearch

Shawn T. Grushecky; Jan Wiedenbeck; Curt C. Hassler

2013-01-01

Forest harvesting is an integral part of the West Virginia forest economy. This component of the supply chain supports a diverse array of primary and secondary processors. A key metric used to describe the efficiency of the roundwood extraction process is the logging utilization factor (LUF). The LUF is one way managers can discern the overall use of harvested...

Capstone Interdisciplinary Team Project: A Requirement for the MS in Sustainability Degree

ERIC Educational Resources Information Center

Jiji, Latif M.; Schonfeld, Irvin Sam; Smith, George A.

2015-01-01

Purpose: This paper aims to describe experience gained with a required six-credit year-long course, the Capstone Interdisciplinary Team Project, a key component of the Master of Science (MS) in Sustainability degree at the City College of New York. A common feature of sustainability problems is their interdisciplinary nature. Solutions to…

Impacts of Performance Pay under the Teacher Incentive Fund: Study Design Report

ERIC Educational Resources Information Center

Glazerman, Steven; Chiang, Hanley; Wellington, Alison; Constantine, Jill; Player, Dan

2011-01-01

The body of research on the design, implementation, and effects of performance-based compensation systems has influenced the design and evaluation of the 2010 Teacher Incentive Fund (TIF) grants. In the sections presented here, the authors describe the key components of 2010 TIF grants and the conceptual framework for the evaluation. The remainder…

The IAQ Tools for Schools Walkthrough Video: Four Schools Making a Difference. [Videotape].

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC.

This video illustrates one of the key components of the Environmental Protection Agency's "Indoor Air Quality Tools for Schools" (IAQ TfS) process--the school walkthrough. Videotaped at a North Carolina school built in 1999, hosts Keith Flippen and Debra Terry describe what schools in Nebraska, Massachusetts, Connecticut, and Iowa found…

Supporting the Reflective Practice of Tutors: What Do Tutors Reflect on?

ERIC Educational Resources Information Center

Bell, Amani; Mladenovic, Rosina; Segara, Reuben

2010-01-01

Effective self-reflection is a key component of excellent teaching. We describe the types of self-reflection identified in tutors' reflective statements following a peer observation of teaching exercise. We used an adapted version of the categories developed by Grushka, McLeod and Reynolds in 2005 to code text from 20 written statements as…

Developing and Evaluating a Paper-and-Pencil Test to Assess Components of Physics Teachers' Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Kirschner, Sophie; Borowski, Andreas; Fischer, Hans E.; Gess-Newsome, Julie; von Aufschnaiter, Claudia

2016-01-01

Teachers' professional knowledge is assumed to be a key variable for effective teaching. As teacher education has the goal to enhance professional knowledge of current and future teachers, this knowledge should be described and assessed. Nevertheless, only a limited number of studies quantitatively measures physics teachers' professional…

Getting to the Right Algebra: The Equity 2000 Initiative in Milwaukee Public Schools. MDRC Working Papers.

ERIC Educational Resources Information Center

Ham, Sandra; Walker, Erica

This paper describes the Milwaukee Public Schools' involvement in Equity 2000, a standards-based reform initiative to enhance mathematics education and achievement among students of color, thereby increasing their likelihood of college enrollment and completion. The study highlights efforts to support and sustain a key component of Equity 2000:…

Low-Cost Magnetic Stirrer from Recycled Computer Parts with Optional Hot Plate

ERIC Educational Resources Information Center

Guidote, Armando M., Jr.; Pacot, Giselle Mae M.; Cabacungan, Paul M.

2015-01-01

Magnetic stirrers and hot plates are key components of science laboratories. However, these are not readily available in many developing countries due to their high cost. This article describes the design of a low-cost magnetic stirrer with hot plate from recycled materials. Some of the materials used are neodymium magnets and CPU fans from…

Making Meaning of MSW Students' Statistical Abilities: The Role of Self-Efficacy and Knowledge-Based Assessment

ERIC Educational Resources Information Center

Mirick, Rebecca G.; Davis, Ashley

2017-01-01

Although statistics and research are key components of social work education, students are often described as reluctant consumers and users of statistics. Self-efficacy theory has been used to understand students' engagement with the statistical knowledge needed for practice. This quantitative study explores the relationship between self-efficacy,…

The Every Student Succeeds Act: A Summary of Federal Policy and Implications for Maine

ERIC Educational Resources Information Center

Fairman, Janet; Johnson, Amy; Eberle, Francis

2017-01-01

Part I summarizes key topics of federal education policy articulating accountability requirements for state education agencies (SEAs) and local education agencies (LEAs, or school districts). In that section we describe major goals of the legislation and which components are the same or changed in the federal law. The findings are grouped into…

El curriculo creativo para ninos de cero a tres anos (The Creative Curriculum for Infants and Toddlers).

ERIC Educational Resources Information Center

Dombro, Amy Laura; Colker, Laura J.; Dodge, Diane Trister

Stemming from the core idea that infant and toddler care should be based on building relationships, this curriculum in Spanish-language version provides a foundation for staff development. Section 1, "Why a Curriculum for Infants and Toddlers?" examines key quality indicators, discusses curriculum components, describes how to use the…

Protein requirements for long term missions

NASA Technical Reports Server (NTRS)

Stein, T. P.

1994-01-01

A key component of the diet for a space mission is protein. This first part of this paper reviews the reasons for emphasizing protein nurtition and then discusses what the requirements are likely to be. The second part discusses potential advantages of modifying these requirements and describes potential potential approaches to effecting these modificatons based on well established ground based models.

Listen to Our Salmon: Forests, Rivers and Oceans are Connected.

ERIC Educational Resources Information Center

Mueller, Andrea; Brown, Rod

1998-01-01

A university-based researcher and a grade seven teacher collaborated to plan a science curriculum that would help elementary school students discover the world of salmon and understand its life cycle. Describes key components of the salmon-enhancement program and river-health project. A student's record of hatching chum fry in the classroom is…

Calibration techniques and results in the soft X-ray and extreme ultraviolet for components of the Extreme Ultraviolet Explorer Satellite

NASA Technical Reports Server (NTRS)

Malina, Roger F.; Jelinsky, Patrick; Bowyer, Stuart

1986-01-01

The calibration facilities and techniques for the Extreme Ultraviolet Explorer (EUVE) from 44 to 2500 A are described. Key elements include newly designed radiation sources and a collimated monochromatic EUV beam. Sample results for the calibration of the EUVE filters, detectors, gratings, collimators, and optics are summarized.

Legacy systems: managing evolution through integration in a distributed and object-oriented computing environment.

PubMed

Lemaitre, D; Sauquet, D; Fofol, I; Tanguy, L; Jean, F C; Degoulet, P

1995-01-01

Legacy systems are crucial for organizations since they support key functionalities. But they become obsolete with aging and the apparition of new techniques. Managing their evolution is a key issue in software engineering. This paper presents a strategy that has been developed at Broussais University Hospital in Paris to make a legacy system devoted to the management of health care units evolve towards a new up-to-date software. A two-phase evolution pathway is described. The first phase consists in separating the interface from the data storage and application control and in using a communication channel between the individualized components. The second phase proposes to use an object-oriented DBMS in place of the homegrown system. An application example for the management of hypertensive patients is described.

Low-power cryptographic coprocessor for autonomous wireless sensor networks

NASA Astrophysics Data System (ADS)

Olszyna, Jakub; Winiecki, Wiesław

2013-10-01

The concept of autonomous wireless sensor networks involves energy harvesting, as well as effective management of system resources. Public-key cryptography (PKC) offers the advantage of elegant key agreement schemes with which a secret key can be securely established over unsecure channels. In addition to solving the key management problem, the other major application of PKC is digital signatures, with which non-repudiation of messages exchanges can be achieved. The motivation for studying low-power and area efficient modular arithmetic algorithms comes from enabling public-key security for low-power devices that can perform under constrained environment like autonomous wireless sensor networks. This paper presents a cryptographic coprocessor tailored to the autonomous wireless sensor networks constraints. Such hardware circuit is aimed to support the implementation of different public-key cryptosystems based on modular arithmetic in GF(p) and GF(2m). Key components of the coprocessor are described as GEZEL models and can be easily transformed to VHDL and implemented in hardware.

Standard plane localization in ultrasound by radial component model and selective search.

PubMed

Ni, Dong; Yang, Xin; Chen, Xin; Chin, Chien-Ting; Chen, Siping; Heng, Pheng Ann; Li, Shengli; Qin, Jing; Wang, Tianfu

2014-11-01

Acquisition of the standard plane is crucial for medical ultrasound diagnosis. However, this process requires substantial experience and a thorough knowledge of human anatomy. Therefore it is very challenging for novices and even time consuming for experienced examiners. We proposed a hierarchical, supervised learning framework for automatically detecting the standard plane from consecutive 2-D ultrasound images. We tested this technique by developing a system that localizes the fetal abdominal standard plane from ultrasound video by detecting three key anatomical structures: the stomach bubble, umbilical vein and spine. We first proposed a novel radial component-based model to describe the geometric constraints of these key anatomical structures. We then introduced a novel selective search method which exploits the vessel probability algorithm to produce probable locations for the spine and umbilical vein. Next, using component classifiers trained by random forests, we detected the key anatomical structures at their probable locations within the regions constrained by the radial component-based model. Finally, a second-level classifier combined the results from the component detection to identify an ultrasound image as either a "fetal abdominal standard plane" or a "non- fetal abdominal standard plane." Experimental results on 223 fetal abdomen videos showed that the detection accuracy of our method was as high as 85.6% and significantly outperformed both the full abdomen and the separate anatomy detection methods without geometric constraints. The experimental results demonstrated that our system shows great promise for application to clinical practice. Copyright © 2014 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Modeling Creep Effects in Advanced SiC/SiC Composites

NASA Technical Reports Server (NTRS)

Lang, Jerry; DiCarlo, James

2006-01-01

Because advanced SiC/SiC composites are projected to be used for aerospace components with large thermal gradients at high temperatures, efforts are on-going at NASA Glenn to develop approaches for modeling the anticipated creep behavior of these materials and its subsequent effects on such key composite properties as internal residual stress, proportional limit stress, ultimate tensile strength, and rupture life. Based primarily on in-plane creep data for 2D panels, this presentation describes initial modeling progress at applied composite stresses below matrix cracking for some high performance SiC/SiC composite systems recently developed at NASA. Studies are described to develop creep and rupture models using empirical, mechanical analog, and mechanistic approaches, and to implement them into finite element codes for improved component design and life modeling

Second-order schedules: discrimination of components1

PubMed Central

Squires, Nancy; Norborg, James; Fantino, Edmund

1975-01-01

Pigeons were exposed to a series of second-order schedules in which the completion of a fixed number of fixed-interval components produced food. In Experiment 1, brief (2 sec) stimulus presentations occurred as each fixed-interval component was completed. During the brief-stimulus presentation terminating the last fixed-interval component, a response was required on a second key, the brief-stimulus key, to produce food. Responses on the brief-stimulus key before the last brief-stimulus presentation had no scheduled consequences, but served as a measure of the extent to which the final component was discriminated from preceding components. Whether there were one, two, four, or eight fixed-interval components, responses on the brief-stimulus key occurred during virtually every brief-stimulus presentation. In Experiment 2, an attempt was made to punish unnecessary responses on the brief-stimulus key, i.e., responses on the brief-stimulus key that occurred before the last component. None of the pigeons learned to withhold these responses, even though they produced a 15-sec timeout and loss of primary reinforcement. In Experiment 3, different key colors were associated with each component of a second-order schedule (a chain schedule). In contrast to Experiment 1, brief-stimulus key responses were confined to the last component. It was concluded that pigeons do not discriminate well between components of second-order schedules unless a unique exteroceptive cue is provided for each component. The relative discriminability of the components may account for the observed differences in initial-component response rates between comparable brief-stimulus, tandem, and chain schedules. PMID:16811868

Chemical interaction: enhancement and inhibition of clastogenicity.

PubMed Central

Anwar, W A

1993-01-01

Most environmental exposures involve concurrent or sequential exposure to multiple chemicals in air, water, and food. Interactive effects in carcinogenesis have been described for certain combinations of agents. They are described in terms of enhancement or inhibition of carcinogenesis. Enhancement effects have been documented for cigarette smoking in combination with exposure to asbestos, radon, alcohol, or other exposures. A variety of inhibitors of carcinogenesis have also been described. They are classified into agents preventing formation of carcinogens; blocking agents; and suppressing agents. Assessment of risk from exposure to multiple agents can be derived either from epidemiological studies in relation to actual exposure or from laboratory studies after controlled exposure to different agents. Prediction of how toxic components of mixtures will interact should be based on an understanding of the mechanisms of such interactions. Compounds may interact chemically, yielding new toxic components or causing a change in the biological availability of the existing components or metabolites. In humans, great individual variability in response is to be expected because of genetic heterogeneity or acquired host susceptibility factors. Interaction is thus a key component in the risk assessment process. In this paper, the definition of interaction and the theoretical basis for different types of interaction in cancer causation are reviewed. Epidemiological and experimental studies showing interactive effects of two chemical carcinogens are also presented. PMID:8143617

Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Hirt, Evelyn H.; Pitman, Stan G.

The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components.more » This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.« less

Photonics technology development for optical fuzing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, J.J.; Geib, Kent Martin; von der Lippe, C.M.

2005-07-01

This paper describes the photonic component development, which exploits pioneering work and unique expertise at Sandia National Laboratories, ARDEC and the Army Research Laboratory by combining key optoelectronic technologies to design and demonstrate components for this fuzing application. The technologies under investigation for the optical fuze design covered in this paper are vertical cavity surface emitting lasers (VECSELs), integrated resonant cavity photodetectors (RCPD), and diffractive micro-optics. The culmination of this work will be low cost, robust, fully integrated, g-hardened components designed suitable for proximity fuzing applications. The use of advanced photonic components will enable replacement of costly assemblies that employmore » discrete lasers, photodetectors, and bulk optics. The integrated devices will be mass produced and impart huge savings for a variety of Army applications.« less

Implementation of a Text-Based Content Intervention in Secondary Social Studies Classes.

PubMed

Wanzek, Jeanne; Vaughn, Sharon

2016-12-01

We describe teacher fidelity (adherence to the components of the treatment as specified by the research team) based on a series of studies of a multicomponent intervention, Promoting Acceleration of Comprehension and Content Through Text (PACT), with middle and high school social studies teachers and their students. Findings reveal that even with highly specified materials and implementing practices that are aligned with effective reading comprehension and content instruction, teachers' fidelity was consistently low for some components and high for others. Teachers demonstrated consistently high implementation fidelity and quality for the instructional components of building background knowledge (comprehension canopy) and teaching key content vocabulary (essential words), whereas we recorded consistently lower fidelity and quality of implementation for the instructional components of critical reading and knowledge application. © 2016 Wiley Periodicals, Inc.

Internships for Future Faculty: Meeting the Career Goals of the Next Generation of Educators in Marriage and Family Therapy

ERIC Educational Resources Information Center

Miller, John K.; Todahl, Jeff; Platt, Jason J.; Lambert-Shute, Jennifer; Eppler, Christie S.

2010-01-01

A key component of a doctoral education in marriage and family therapy (MFT) is the completion of an internship. Virtually all MFT doctoral internships are focused on advanced clinical practice and often are located in agencies unconnected with an academic setting. This article describes an MFT doctoral internship specifically designed to foster…

Multipass reconfiguration of the HELEN Nd:glass laser at the Atomic Weapons Establishment.

PubMed

Norman, Michael J; Andrew, James E; Bett, Thomas H; Clifford, Roger K; England, John E; Hopps, Nicholas W; Parker, Kenneth W; Porter, Kenneth; Stevenson, Mark

2002-06-20

The HELEN high-power Nd:glass laser has been rebuilt in a new multipass configuration that requires fewer components to maintain existing performance. This is expected to lead to greater system availability and reduced running costs. We describe the new design, discuss some of the key issues that had to be addressed, and present operational results.

Using Nominal Technique to Inform a Sexual Health Program for Black Youth

ERIC Educational Resources Information Center

Annang, Lucy; Hannon, Lonnie; Fletcher, Faith E.; Horn, Wendy Sykes; Cornish, Disa

2011-01-01

Objectives: To describe how nominal group technique (NGT) was used to inform the development of a sexual health education program for black high school youth in the South. Methods: NGT was used with a community advisory board (CAB) to obtain information regarding the key components of a sexual health program for youth in their community. Results:…

Development and Implementation of a Pediatric Palliative Care Program in a Developing Country.

PubMed

Doherty, Megan; Thabet, Chloé

2018-01-01

Palliative care is recognized as an important component of care for children with cancer and other life-limiting conditions. In resource limited settings, palliative care is a key component of care for children with cancer and other life-limiting conditions. Globally, 98% of children who need palliative care live in low- or middle-income countries, where there are very few palliative care services available. There is limited evidence describing the practical considerations for the development and implementation of sustainable and cost-effective palliative care services in developing countries. Our aim is to describe the key considerations and initiatives that were successful in planning and implementing a hospital-based pediatric palliative care service specifically designed for a resource-limited setting. Bangabandu Sheikh Mujib Medical University (BSMMU) is a tertiary referral hospital in Bangladesh. Local palliative care services are very limited and focused on adult patients. In partnership with World Child Cancer, a project establishing a pediatric palliative care service was developed for children with cancer at BSMMU. We describe four key elements which were crucial for the success of this program: (1) raising awareness and sensitizing hospital administrators and clinical staff about pediatric palliative care; (2) providing education and training on pediatric palliative care for clinical staff; (3) forming a pediatric palliative care team; and (4) collecting data to characterize the need for pediatric palliative care. This model of a hospital-based pediatric palliative care service can be replicated in other resource-limited settings and can be expanded to include children with other life-limiting conditions. The development of pilot programs can generate interest among local physicians to become trained in pediatric palliative care and can be used to advocate for the palliative care needs of children.

Statistical issues in quality control of proteomic analyses: good experimental design and planning.

PubMed

Cairns, David A

2011-03-01

Quality control is becoming increasingly important in proteomic investigations as experiments become more multivariate and quantitative. Quality control applies to all stages of an investigation and statistics can play a key role. In this review, the role of statistical ideas in the design and planning of an investigation is described. This involves the design of unbiased experiments using key concepts from statistical experimental design, the understanding of the biological and analytical variation in a system using variance components analysis and the determination of a required sample size to perform a statistically powerful investigation. These concepts are described through simple examples and an example data set from a 2-D DIGE pilot experiment. Each of these concepts can prove useful in producing better and more reproducible data. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Legacy systems: managing evolution through integration in a distributed and object-oriented computing environment.

PubMed Central

Lemaitre, D.; Sauquet, D.; Fofol, I.; Tanguy, L.; Jean, F. C.; Degoulet, P.

1995-01-01

Legacy systems are crucial for organizations since they support key functionalities. But they become obsolete with aging and the apparition of new techniques. Managing their evolution is a key issue in software engineering. This paper presents a strategy that has been developed at Broussais University Hospital in Paris to make a legacy system devoted to the management of health care units evolve towards a new up-to-date software. A two-phase evolution pathway is described. The first phase consists in separating the interface from the data storage and application control and in using a communication channel between the individualized components. The second phase proposes to use an object-oriented DBMS in place of the homegrown system. An application example for the management of hypertensive patients is described. PMID:8563252

The Design of a Templated C++ Small Vector Class for Numerical Computing

NASA Technical Reports Server (NTRS)

Moran, Patrick J.

2000-01-01

We describe the design and implementation of a templated C++ class for vectors. The vector class is templated both for vector length and vector component type; the vector length is fixed at template instantiation time. The vector implementation is such that for a vector of N components of type T, the total number of bytes required by the vector is equal to N * size of (T), where size of is the built-in C operator. The property of having a size no bigger than that required by the components themselves is key in many numerical computing applications, where one may allocate very large arrays of small, fixed-length vectors. In addition to the design trade-offs motivating our fixed-length vector design choice, we review some of the C++ template features essential to an efficient, succinct implementation. In particular, we highlight some of the standard C++ features, such as partial template specialization, that are not supported by all compilers currently. This report provides an inventory listing the relevant support currently provided by some key compilers, as well as test code one can use to verify compiler capabilities.

Building the Nonuniversity, Tertiary Care Center Hepatobiliary and Pancreatic Surgery Practice: Structural and Financial Considerations.

PubMed

Baker, Erin H; Siddiqui, Imran; Vrochides, Dionisios; Iannitti, David A; Martinie, John B; Rorabaugh, Lauren; Jeyarajah, D Rohan; Swan, Ryan Z

2016-12-01

Early in their careers, many new surgeons lack the background and experience to understand essential components needed to build a surgical practice. Surgical resident education is often devoid of specific instruction on the business of medicine and practice management. In particular, hepatobiliary and pancreatic (HPB) surgeons require many key components to build a successful practice secondary to significant interdisciplinary coordination and a scope of complex surgery, which spans challenging benign and malignant disease processes. In the following, we describe the required clinical and financial components for developing a successful HPB surgery practice in the nonuniversity tertiary care center. We discuss significant financial considerations for understanding community need and hospital investment, contract establishment, billing, and coding. We summarize the structural elements and key personnel necessary for establishing an effectual HPB surgical team. This article provides useful, essential information for a new HPB surgeon looking to establish a surgical practice. It also provides insight for health-care administrators as to the value an HPB surgeon can bring to a hospital or health-care system.

The cobas® 6800/8800 System: a new era of automation in molecular diagnostics.

PubMed

Cobb, Bryan; Simon, Christian O; Stramer, Susan L; Body, Barbara; Mitchell, P Shawn; Reisch, Natasa; Stevens, Wendy; Carmona, Sergio; Katz, Louis; Will, Stephen; Liesenfeld, Oliver

2017-02-01

Molecular diagnostics is a key component of laboratory medicine. Here, the authors review key triggers of ever-increasing automation in nucleic acid amplification testing (NAAT) with a focus on specific automated Polymerase Chain Reaction (PCR) testing and platforms such as the recently launched cobas® 6800 and cobas® 8800 Systems. The benefits of such automation for different stakeholders including patients, clinicians, laboratory personnel, hospital administrators, payers, and manufacturers are described. Areas Covered: The authors describe how molecular diagnostics has achieved total laboratory automation over time, rivaling clinical chemistry to significantly improve testing efficiency. Finally, the authors discuss how advances in automation decrease the development time for new tests enabling clinicians to more readily provide test results. Expert Commentary: The advancements described enable complete diagnostic solutions whereby specific test results can be combined with relevant patient data sets to allow healthcare providers to deliver comprehensive clinical recommendations in multiple fields ranging from infectious disease to outbreak management and blood safety solutions.

Adverse Outcome Pathways – Organizing Toxicological ...

EPA Pesticide Factsheets

The number of chemicals for which environmental regulatory decisions are required far exceeds the current capacity for toxicity testing. High throughput screening (HTS) commonly used for drug discovery has the potential to increase this capacity. The adverse outcome pathway (AOP) concept has emerged as a natural framework for connecting high throughput toxicity testing (HTT) results to potential impacts on humans and wildlife populations. An AOP consists of two main components that describe the biological mechanisms driving toxicity. Key events represent biological processes essential for causing the adverse outcome that are also measurable experimentally. Key event relationships capture the biological processes connecting the key events. Evidence documented for each KER based on measurements of the KEs can provide the confidence needed for extrapolating HTT from early key events to overt toxicity represented by later key events based on the AOP. The IPCS mode of action (MOA) framework incorporates information required for making a chemical-specific toxicity determination. Given the close relationship between the AOP and MOA frameworks, it is possible to assemble an MOA by incorporating HTT results, chemical properties including absorption, distribution, metabolism, and excretion (ADME), and an AOP describing the biological basis of toxicity thereby streamlining the process. While current applications focus on the assessment of risk for environmental chemicals,

Methodological reporting in qualitative, quantitative, and mixed methods health services research articles.

PubMed

Wisdom, Jennifer P; Cavaleri, Mary A; Onwuegbuzie, Anthony J; Green, Carla A

2012-04-01

Methodologically sound mixed methods research can improve our understanding of health services by providing a more comprehensive picture of health services than either method can alone. This study describes the frequency of mixed methods in published health services research and compares the presence of methodological components indicative of rigorous approaches across mixed methods, qualitative, and quantitative articles. All empirical articles (n = 1,651) published between 2003 and 2007 from four top-ranked health services journals. All mixed methods articles (n = 47) and random samples of qualitative and quantitative articles were evaluated to identify reporting of key components indicating rigor for each method, based on accepted standards for evaluating the quality of research reports (e.g., use of p-values in quantitative reports, description of context in qualitative reports, and integration in mixed method reports). We used chi-square tests to evaluate differences between article types for each component. Mixed methods articles comprised 2.85 percent (n = 47) of empirical articles, quantitative articles 90.98 percent (n = 1,502), and qualitative articles 6.18 percent (n = 102). There was a statistically significant difference (χ(2) (1) = 12.20, p = .0005, Cramer's V = 0.09, odds ratio = 1.49 [95% confidence interval = 1,27, 1.74]) in the proportion of quantitative methodological components present in mixed methods compared to quantitative papers (21.94 versus 47.07 percent, respectively) but no statistically significant difference (χ(2) (1) = 0.02, p = .89, Cramer's V = 0.01) in the proportion of qualitative methodological components in mixed methods compared to qualitative papers (21.34 versus 25.47 percent, respectively). Few published health services research articles use mixed methods. The frequency of key methodological components is variable. Suggestions are provided to increase the transparency of mixed methods studies and the presence of key methodological components in published reports. © Health Research and Educational Trust.

Methodological Reporting in Qualitative, Quantitative, and Mixed Methods Health Services Research Articles

PubMed Central

Wisdom, Jennifer P; Cavaleri, Mary A; Onwuegbuzie, Anthony J; Green, Carla A

2012-01-01

Objectives Methodologically sound mixed methods research can improve our understanding of health services by providing a more comprehensive picture of health services than either method can alone. This study describes the frequency of mixed methods in published health services research and compares the presence of methodological components indicative of rigorous approaches across mixed methods, qualitative, and quantitative articles. Data Sources All empirical articles (n = 1,651) published between 2003 and 2007 from four top-ranked health services journals. Study Design All mixed methods articles (n = 47) and random samples of qualitative and quantitative articles were evaluated to identify reporting of key components indicating rigor for each method, based on accepted standards for evaluating the quality of research reports (e.g., use of p-values in quantitative reports, description of context in qualitative reports, and integration in mixed method reports). We used chi-square tests to evaluate differences between article types for each component. Principal Findings Mixed methods articles comprised 2.85 percent (n = 47) of empirical articles, quantitative articles 90.98 percent (n = 1,502), and qualitative articles 6.18 percent (n = 102). There was a statistically significant difference (χ2(1) = 12.20, p = .0005, Cramer's V = 0.09, odds ratio = 1.49 [95% confidence interval = 1,27, 1.74]) in the proportion of quantitative methodological components present in mixed methods compared to quantitative papers (21.94 versus 47.07 percent, respectively) but no statistically significant difference (χ2(1) = 0.02, p = .89, Cramer's V = 0.01) in the proportion of qualitative methodological components in mixed methods compared to qualitative papers (21.34 versus 25.47 percent, respectively). Conclusion Few published health services research articles use mixed methods. The frequency of key methodological components is variable. Suggestions are provided to increase the transparency of mixed methods studies and the presence of key methodological components in published reports. PMID:22092040

Concentrating Solar Power Central Receiver Panel Component Fabrication and Testing FINAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Michael W; Miner, Kris

The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then completemore » the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.« less

Bulgarian fuel models developed for implementation in FARSITE simulations for test cases in Zlatograd area

Treesearch

Nina Dobrinkova; LaWen Hollingsworth; Faith Ann Heinsch; Greg Dillon; Georgi Dobrinkov

2014-01-01

As a key component of the cross-border project between Bulgaria and Greece known as OUTLAND, a team from the Bulgarian Academy of Sciences and Rocky Mountain Research Station started a collaborative project to identify and describe various fuel types for a test area in Bulgaria in order to model fire behavior for recent wildfires. Although there have been various...

Effects of Web-Mediated Teacher Professional Development on the Language and Literacy Skills of Children Enrolled in Prekindergarten Programs

ERIC Educational Resources Information Center

Downer, Jason T.; Pianta, Robert C.; Fan, Xitao; Hamre, Bridget K.; Mashburn, Andrew; Justice, Laura

2011-01-01

As early education grows in the United States, in-service professional development in key instructional and interaction skills is a core component of capacity building in early childhood education. In this article, we describe results from an evaluation of the effects of MyTeachingPartner, a web-based system of professional development, on…

Residence times and decay rates of downed woody debris biomass/carbon in eastern US forests

Treesearch

Matthew B. Russell; Christopher W. Woodall; Shawn Fraver; Anthony W. D' Amato; Grant M. Domke; Kenneth E. Skog

2014-01-01

A key component in describing forest carbon (C) dynamics is the change in downed dead wood biomass through time. Specifically, there is a dearth of information regarding the residence time of downed woody debris (DWD), which may be reflected in the diversity of wood (for example, species, size, and stage of decay) and site attributes (for example, climate) across the...

Thermo-Gas-Dynamic Model of Afterburning in Explosions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhl, A L; Ferguson, R E; Bell, J B

2003-07-27

A theoretical model of afterburning in explosions created by turbulent mixing of the detonation products from fuel-rich charges with air is described. It contains three key elements: (i) a thermodynamic-equilibrium description of the fluids (fuel, air, and products), (ii) a multi-component gas-dynamic treatment of the flow field, and (iii) a sub-grid model of molecular processes of mixing, combustion and equilibration.

Teaching Experiment to Elucidate a Cation-Pi Effect in an Alkyne Cycloaddition Reaction and Illustrate Hypothesis-Driven Design of Experiments

ERIC Educational Resources Information Center

St.Germain, Elijah J.; Horowitz, Andrew S.; Rucco, Dominic; Rezler, Evonne M.; Lepore, Salvatore D.

2017-01-01

An organic chemistry experiment is described that is based on recent research to elucidate a novel cation-pi interaction between tetraalkammonium cations and propargyl hydrazines. This nonbonded interaction is a key component of the mechanism of ammonium-catalyzed intramolecular cycloaddition of nitrogen to the terminal carbon of a C-C triple bond…

Systems test facilities existing capabilities compilation

NASA Technical Reports Server (NTRS)

Weaver, R.

1981-01-01

Systems test facilities (STFS) to test total photovoltaic systems and their interfaces are described. The systems development (SD) plan is compilation of existing and planned STFs, as well as subsystem and key component testing facilities. It is recommended that the existing capabilities compilation is annually updated to provide and assessment of the STF activity and to disseminate STF capabilities, status and availability to the photovoltaics program.

Characterizing the Development of Students' Understandings regarding the Second Law of Thermodynamics: Using Learning Progressions to Illuminate Thinking in High School Chemistry

ERIC Educational Resources Information Center

Cunningham, Kevin D.

2011-01-01

As demonstrated by their emphasis in the new, national, science education standards, learning progressions (LPs) have become a valuable means of informing teaching and learning. LPs serve this role by isolating the key components of central skills and understandings, and by describing how those abilities and concepts tend to develop over time…

Argo workstation: a key component of operational oceanography

NASA Astrophysics Data System (ADS)

Dong, Mingmei; Xu, Shanshan; Miao, Qingsheng; Yue, Xinyang; Lu, Jiawei; Yang, Yang

2018-02-01

Operational oceanography requires the quantity, quality, and availability of data set and the timeliness and effectiveness of data products. Without steady and strong operational system supporting, operational oceanography will never be proceeded far. In this paper we describe an integrated platform named Argo Workstation. It operates as a data processing and management system, capable of data collection, automatic data quality control, visualized data check, statistical data search and data service. After it is set up, Argo workstation provides global high quality Argo data to users every day timely and effectively. It has not only played a key role in operational oceanography but also set up an example for operational system.

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

Wnt signaling in cancer

PubMed Central

Zhan, T; Rindtorff, N; Boutros, M

2017-01-01

Wnt signaling is one of the key cascades regulating development and stemness, and has also been tightly associated with cancer. The role of Wnt signaling in carcinogenesis has most prominently been described for colorectal cancer, but aberrant Wnt signaling is observed in many more cancer entities. Here, we review current insights into novel components of Wnt pathways and describe their impact on cancer development. Furthermore, we highlight expanding functions of Wnt signaling for both solid and liquid tumors. We also describe current findings how Wnt signaling affects maintenance of cancer stem cells, metastasis and immune control. Finally, we provide an overview of current strategies to antagonize Wnt signaling in cancer and challenges that are associated with such approaches. PMID:27617575

Application of the Gmc-1000 and Gmc-2000 Mine Cooling Units for Central Air-Conditioning in Underground Mines / Zastosowanie górniczego urządzenia chłodniczego gmc-1000 i gmc-2000 w centralnej klimatyzacji kopalń podziemnych

NASA Astrophysics Data System (ADS)

Wojciechowski, Jerzy

2013-03-01

The paper describes the design and results of operating measurements of the GMC-1000 and GMC- 2000 Mine Cooling Units. The first part describes the design of the cooling unit and its key components: the chiller, evaporator, condenser, oil cooler, evaporative water cooler and gallery air cooler. The possibilities of use in central air conditioning systems of underground mines are described. The second part discusses the results of the workstation and operating measurements and determines the coefficients for evaluating the performance of the mine cooling unit.

A unified teleoperated-autonomous dual-arm robotic system

NASA Technical Reports Server (NTRS)

Hayati, Samad; Lee, Thomas S.; Tso, Kam Sing; Backes, Paul G.; Lloyd, John

1991-01-01

A description is given of complete robot control facility built as part of a NASA telerobotics program to develop a state-of-the-art robot control environment for performing experiments in the repair and assembly of spacelike hardware to gain practical knowledge of such work and to improve the associated technology. The basic architecture of the manipulator control subsystem is presented. The multiarm Robot Control C Library (RCCL), a key software component of the system, is described, along with its implementation on a Sun-4 computer. The system's simulation capability is also described, and the teleoperation and shared control features are explained.

Next-generation genotype imputation service and methods.

PubMed

Das, Sayantan; Forer, Lukas; Schönherr, Sebastian; Sidore, Carlo; Locke, Adam E; Kwong, Alan; Vrieze, Scott I; Chew, Emily Y; Levy, Shawn; McGue, Matt; Schlessinger, David; Stambolian, Dwight; Loh, Po-Ru; Iacono, William G; Swaroop, Anand; Scott, Laura J; Cucca, Francesco; Kronenberg, Florian; Boehnke, Michael; Abecasis, Gonçalo R; Fuchsberger, Christian

2016-10-01

Genotype imputation is a key component of genetic association studies, where it increases power, facilitates meta-analysis, and aids interpretation of signals. Genotype imputation is computationally demanding and, with current tools, typically requires access to a high-performance computing cluster and to a reference panel of sequenced genomes. Here we describe improvements to imputation machinery that reduce computational requirements by more than an order of magnitude with no loss of accuracy in comparison to standard imputation tools. We also describe a new web-based service for imputation that facilitates access to new reference panels and greatly improves user experience and productivity.

[Giant hernias with loss of domain: what is the best way to prepare patients?].

PubMed

Balaphas, Alexandre; Morel, Philippe; Breguet, Romain; Assalino, Michela

2016-06-15

Giant hernias with loss of domain induce physiological modifications that impair quality of life and make more complex their surgical management. A good preparation of patients before surgery is the key to an eventless postoperative course. The progressive pre-operative pneumoperitoneum (PPP) is one of the described abdominal augmentation protocols which can help patients to tolerate hernia content reintegration and avoid components separation technique during hernia repair. This article describes the management of these complex patients. We also report the case of a patient who follows successfully a PPP protocol.

Earth Scanner Bearing Accelerated Life Test

NASA Technical Reports Server (NTRS)

Dietz, Brian J.; VanDyk, Steven G.; Predmore, Roamer E.

2000-01-01

The Moderate Resolution Imaging Spectrometer (MODIS) optical instrument for NASA Goddard will measure biological and physical processes on the Earth's surface and in the lower atmosphere. A key component of the instrument is an extremely accurate scan mirror motor/encoder assembly. Of prime concern in the performance and reliability of the scan motor/encoder is bearing selection and lubrication. This paper describes life testing of the bearings and lubrication selected for the program.

An Analysis of Public Health Policy and Legal Issues Relevant to Mobile Food Vending

PubMed Central

Stevens, Stephanie A.; Yen, Irene H.; Laraia, Barbara L.

2010-01-01

Mobile food vending is a component of the food environment that has received little attention in the public health literature beyond concerns about food sanitation and hygiene issues. However, several features of mobile food vending make it an intriguing venue for food access. We present key components of mobile vending regulation and provide examples from 12 US cities to illustrate the variation that can exist surrounding these regulations. Using these regulatory features as a framework, we highlight existing examples of “healthy vending policies” to describe how mobile food vending can be used to increase access to nutritious food for vulnerable populations. PMID:20864711

USGS Tampa Bay Pilot Study

USGS Publications Warehouse

Yates, K.K.; Cronin, T. M.; Crane, M.; Hansen, M.; Nayeghandi, A.; Swarzenski, P.; Edgar, T.; Brooks, G.R.; Suthard, B.; Hine, A.; Locker, S.; Willard, D.A.; Hastings, D.; Flower, B.; Hollander, D.; Larson, R.A.; Smith, K.

2007-01-01

Providing a web-based digital information management system of information for scientists and the public, including a system that supports the work of those officials who must make decisions that affect the state of the bay. The Tampa Bay Study is in its sixth year and will continue through September 2007. This paper presents a non-inclusive summary of key findings associated with the six primary project components listed above. Component 4 (above) is described in detail in the following chapter 13. More information on the Tampa Bay Study is available from our on-line digital information system for the Tampa Bay Study at http://gulfsci.usgs.gov.

Effect of noise in principal component analysis with an application to ozone pollution

NASA Astrophysics Data System (ADS)

Tsakiri, Katerina G.

This thesis analyzes the effect of independent noise in principal components of k normally distributed random variables defined by a covariance matrix. We prove that the principal components as well as the canonical variate pairs determined from joint distribution of original sample affected by noise can be essentially different in comparison with those determined from the original sample. However when the differences between the eigenvalues of the original covariance matrix are sufficiently large compared to the level of the noise, the effect of noise in principal components and canonical variate pairs proved to be negligible. The theoretical results are supported by simulation study and examples. Moreover, we compare our results about the eigenvalues and eigenvectors in the two dimensional case with other models examined before. This theory can be applied in any field for the decomposition of the components in multivariate analysis. One application is the detection and prediction of the main atmospheric factor of ozone concentrations on the example of Albany, New York. Using daily ozone, solar radiation, temperature, wind speed and precipitation data, we determine the main atmospheric factor for the explanation and prediction of ozone concentrations. A methodology is described for the decomposition of the time series of ozone and other atmospheric variables into the global term component which describes the long term trend and the seasonal variations, and the synoptic scale component which describes the short term variations. By using the Canonical Correlation Analysis, we show that solar radiation is the only main factor between the atmospheric variables considered here for the explanation and prediction of the global and synoptic scale component of ozone. The global term components are modeled by a linear regression model, while the synoptic scale components by a vector autoregressive model and the Kalman filter. The coefficient of determination, R2, for the prediction of the synoptic scale ozone component was found to be the highest when we consider the synoptic scale component of the time series for solar radiation and temperature. KEY WORDS: multivariate analysis; principal component; canonical variate pairs; eigenvalue; eigenvector; ozone; solar radiation; spectral decomposition; Kalman filter; time series prediction

Nanobonding: A key technology for emerging applications in health and environmental sciences

NASA Astrophysics Data System (ADS)

Howlader, Matiar M. R.; Deen, M. Jamal; Suga, Tadatomo

2015-03-01

In this paper, surface-activation-based nanobonding technology and its applications are described. This bonding technology allows for the integration of electronic, photonic, fluidic and mechanical components into small form-factor systems for emerging sensing and imaging applications in health and environmental sciences. Here, we describe four different nanobonding techniques that have been used for the integration of various substrates — silicon, gallium arsenide, glass, and gold. We use these substrates to create electronic (silicon), photonic (silicon and gallium arsenide), microelectromechanical (glass and silicon), and fluidic (silicon and glass) components for biosensing and bioimaging systems being developed. Our nanobonding technologies provide void-free, strong, and nanometer scale bonding at room temperature or at low temperatures (<200 °C), and do not require chemicals, adhesives, or high external pressure. The interfaces of the nanobonded materials in ultra-high vacuum and in air correspond to covalent bonds, and hydrogen or hydroxyl bonds, respectively.

Automated Environment Generation for Software Model Checking

NASA Technical Reports Server (NTRS)

Tkachuk, Oksana; Dwyer, Matthew B.; Pasareanu, Corina S.

2003-01-01

A key problem in model checking open systems is environment modeling (i.e., representing the behavior of the execution context of the system under analysis). Software systems are fundamentally open since their behavior is dependent on patterns of invocation of system components and values defined outside the system but referenced within the system. Whether reasoning about the behavior of whole programs or about program components, an abstract model of the environment can be essential in enabling sufficiently precise yet tractable verification. In this paper, we describe an approach to generating environments of Java program fragments. This approach integrates formally specified assumptions about environment behavior with sound abstractions of environment implementations to form a model of the environment. The approach is implemented in the Bandera Environment Generator (BEG) which we describe along with our experience using BEG to reason about properties of several non-trivial concurrent Java programs.

Improvements in Cz silicon PV module manufacturing

NASA Astrophysics Data System (ADS)

King, Richard R.; Mitchell, Kim W.; Jester, Theresa L.

1997-02-01

Work focused on reducing the cost per watt of Cz Si photovoltaic modules under Phase I of Siemens Solar Industries' DOE/NREL PVMaT 4A subcontract is described. Module cost components are analyzed and solutions to high-cost items are discussed in terms of specific module designs. The approaches of using larger cells and modules to reduce per-part processing cost, and of minimizing yield loss are particularly leveraging. Yield components for various parts of the fabrication process and various types of defects are shown, and measurements of the force required to break wafers throughout the cell fabrication sequence are given. The most significant type of yield loss is mechanical breakage. The implementation of statistical process control on key manufacturing processes at Siemens Solar Industries is described. Module configurations prototyped during Phase I of this project and scheduled to begin production in Phase II have a projected cost per watt reduction of 19%.

A primer on precision medicine informatics.

PubMed

Sboner, Andrea; Elemento, Olivier

2016-01-01

In this review, we describe key components of a computational infrastructure for a precision medicine program that is based on clinical-grade genomic sequencing. Specific aspects covered in this review include software components and hardware infrastructure, reporting, integration into Electronic Health Records for routine clinical use and regulatory aspects. We emphasize informatics components related to reproducibility and reliability in genomic testing, regulatory compliance, traceability and documentation of processes, integration into clinical workflows, privacy requirements, prioritization and interpretation of results to report based on clinical needs, rapidly evolving knowledge base of genomic alterations and clinical treatments and return of results in a timely and predictable fashion. We also seek to differentiate between the use of precision medicine in germline and cancer. © The Author 2015. Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Fabrication and installation of the Solar Two central receiver

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litwin, R.Z.; Rogers, R.D.

The heart of the Solar Two power plant is the molten salt central receiver that has been designed, fabricated, and installed over an 18 month schedule. During this time, the receiver system from Solar One was also completely disassembled and removed. The receiver tower structure, for the most part, was left intact because Solar Two was designed to fit this structure such that construction time and costs could be minimized. In order to meet this aggressive schedule, receiver panel fabrication required the parallel production of many components. The sequence for assembly of the four major receiver panel components (i.e., tubes,more » header assembly, strongback, and header oven covers) and key fabrication activities such as welding are described. Once the receiver panels were complete, their installation at the site was begun, and the order in which receiver system components were installed in the tower is described. The completion of the Solar Two receiver proved the fabricability of this important system. However, successful operation of the system at Solar Two is needed to demonstrate the technical feasibility of the molten salt central receiver concept.« less

Goal setting and action planning in the rehabilitation setting: development of a theoretically informed practice framework.

PubMed

Scobbie, Lesley; Dixon, Diane; Wyke, Sally

2011-05-01

Setting and achieving goals is fundamental to rehabilitation practice but has been criticized for being a-theoretical and the key components of replicable goal-setting interventions are not well established. To describe the development of a theory-based goal setting practice framework for use in rehabilitation settings and to detail its component parts. Causal modelling was used to map theories of behaviour change onto the process of setting and achieving rehabilitation goals, and to suggest the mechanisms through which patient outcomes are likely to be affected. A multidisciplinary task group developed the causal model into a practice framework for use in rehabilitation settings through iterative discussion and implementation with six patients. Four components of a goal-setting and action-planning practice framework were identified: (i) goal negotiation, (ii) goal identification, (iii) planning, and (iv) appraisal and feedback. The variables hypothesized to effect change in patient outcomes were self-efficacy and action plan attainment. A theory-based goal setting practice framework for use in rehabilitation settings is described. The framework requires further development and systematic evaluation in a range of rehabilitation settings.

The importance of standard operating procedures in clinical trials.

PubMed

Sajdak, Rebecca; Trembath, Lisaann; Thomas, Kathy S

2013-09-01

This special contribution provides insight into the role that standard operating procedures (SOPs) play in an imaging department and their value in building a high-quality research site. If you have ever participated in a clinical trial, many of the principles described in this article should be familiar. However, this article goes a step further by presenting information from a pharmaceutical or device sponsor's point of view-what the sponsor expects from a site during the course of a research study. This article is intended not to provide a complete set of instructions on how to create a great SOP but, instead, to present guidelines to ensure that the key elements are included. After reading the article, you will be able to define SOPs as they pertain to the clinical trial environment, describe key components of an SOP, list the clinical research SOPs that exist in your institution and imaging department, identify which additional SOPs might improve site performance, and describe how the sponsor relies on SOPs to ensure that the highest quality of research is attained.

Application of Intervention Mapping to develop a community-based health promotion pre-pregnancy intervention for adolescent girls in rural South Africa: Project Ntshembo (Hope).

PubMed

Draper, Catherine E; Micklesfield, Lisa K; Kahn, Kathleen; Tollman, Stephen M; Pettifor, John M; Dunger, David B; Norris, Shane A

2014-01-01

South Africa (SA) is undergoing multiple transitions with an increasing burden of non-communicable diseases and high levels of overweight and obesity in adolescent girls and women. Adolescence is key to addressing trans-generational risk and a window of opportunity to intervene and positively impact on individuals' health trajectories into adulthood. Using Intervention Mapping (IM), this paper describes the development of the Ntshembo intervention, which is intended to improve the health and well-being of adolescent girls in order to limit the inter-generational transfer of risk of metabolic disease, in particular diabetes risk. This paper describes the application of the first four steps of IM. Evidence is provided to support the selection of four key behavioural objectives: viz. to eat a healthy, balanced diet, increase physical activity, reduce sedentary behaviour, and promote reproductive health. Appropriate behaviour change techniques are suggested and a theoretical framework outlining components of relevant behaviour change theories is presented. It is proposed that the Ntshembo intervention will be community-based, including specialist adolescent community health workers who will deliver a complex intervention comprising of individual, peer, family and community mobilisation components. The Ntshembo intervention is novel, both in SA and globally, as it is: (1) based on strong evidence, extensive formative work and best practice from evaluated interventions; (2) combines theory with evidence to inform intervention components; (3) includes multiple domains of influence (community through to the individual); (4) focuses on an at-risk target group; and (5) embeds within existing and planned health service priorities in SA.

Bootstrapping and Maintaining Trust in the Cloud

DTIC Science & Technology

2016-03-16

of infrastructure-as-a- service (IaaS) cloud computing services such as Ama- zon Web Services, Google Compute Engine, Rackspace, et. al. means that...Implementation We implemented keylime in ∼3.2k lines of Python in four components: registrar, node, CV, and tenant. The registrar offers a REST-based web ...bootstrap key K. It provides an unencrypted REST-based web service for these two functions. As described earlier, the pro- tocols for exchanging data

OpCost: an open-source system for estimating costs of stand-level forest operations

Treesearch

Conor K. Bell; Robert F. Keefe; Jeremy S. Fried

2017-01-01

This report describes and documents the OpCost forest operations cost model, a key component of the BioSum analysis framework. OpCost is available in two editions: as a callable module for use with BioSum, and in a stand-alone edition that can be run directly from R. OpCost model logic and assumptions for this open-source tool are explained, references to the...

Developing a promotional strategy: important questions for social marketing.

PubMed

Thackeray, Rosemary; Neiger, Brad L; Hanson, Carl L

2007-10-01

Health practitioners often use the terms marketing and promotion interchangeably. Yet, promotion is just one element of an overall marketing strategy. To realize the greatest impact there must be a combination of all the marketing components, including product, price, place, and promotion. The purpose of this article is to clarify the role of promotion and describe key elements of developing a promotional strategy within the broader context of a social marketing initiative.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solar-Lezama, Armando

The goal of the project was to develop a programming model that would significantly improve productivity in the high-performance computing domain by bringing together three components: a) Automated equivalence checking, b) Sketch-based program synthesis, and c) Autotuning. The report provides an executive summary of the research accomplished through this project. At the end of the report is appended a paper that describes in more detail the key technical accomplishments from this project, and which was published in SC 2014.

Program Manager Assessments: Professionalism Personified

DTIC Science & Technology

2015-08-01

dozens of legacy systems. A few years ago, the idea of modernizing this collection in a “ big bang ” approach was rejected in favor of a lower-risk and...chain of com- mand. The assessments are simul - taneously sent to me, the Service or Component acquisition executive, and the program executive officer...use of actual test results at sub-scale, com- ponent testing, modeling, simulation , and field testing were all described in fair detail. Key near

Frontlighting for a virtual cinema

NASA Astrophysics Data System (ADS)

Schuck, Miller H., III; Gleckman, Philip L.

2001-11-01

We describe a novel optical architecture for a LCoS binocular virtual display which, for the first time, meets or exceeds market leading pSi headset performance. A key component of the optical system is the frontlight illumination, which affords system specifications such a 36 degree field of view, a contrast of 80:1, and no IPD adjustment necessary (12 mm pupil). We detail the frontlight design and development, and its interaction with the complete electro-optical module.

The UK Earth System Model project

NASA Astrophysics Data System (ADS)

Tang, Yongming

2016-04-01

In this talk we will describe the development and current status of the UK Earth System Model (UKESM). This project is a NERC/Met Office collaboration and has two objectives; to develop and apply a world-leading Earth System Model, and to grow a community of UK Earth System Model scientists. We are building numerical models that include all the key components of the global climate system, and contain the important process interactions between global biogeochemistry, atmospheric chemistry and the physical climate system. UKESM will be used to make key CMIP6 simulations as well as long-time (e.g. millennium) simulations, large ensemble experiments and investigating a range of future carbon emission scenarios.

Security of quantum key distribution with multiphoton components

PubMed Central

Yin, Hua-Lei; Fu, Yao; Mao, Yingqiu; Chen, Zeng-Bing

2016-01-01

Most qubit-based quantum key distribution (QKD) protocols extract the secure key merely from single-photon component of the attenuated lasers. However, with the Scarani-Acin-Ribordy-Gisin 2004 (SARG04) QKD protocol, the unconditionally secure key can be extracted from the two-photon component by modifying the classical post-processing procedure in the BB84 protocol. Employing the merits of SARG04 QKD protocol and six-state preparation, one can extract secure key from the components of single photon up to four photons. In this paper, we provide the exact relations between the secure key rate and the bit error rate in a six-state SARG04 protocol with single-photon, two-photon, three-photon, and four-photon sources. By restricting the mutual information between the phase error and bit error, we obtain a higher secure bit error rate threshold of the multiphoton components than previous works. Besides, we compare the performances of the six-state SARG04 with other prepare-and-measure QKD protocols using decoy states. PMID:27383014

Meeting critical gate linewidth control needs at the 65 nm node

NASA Astrophysics Data System (ADS)

Mahorowala, Arpan; Halle, Scott; Gabor, Allen; Chu, William; Barberet, Alexandra; Samuels, Donald; Abdo, Amr; Tsou, Len; Yan, Wendy; Iseda, Seiji; Patel, Kaushal; Dirahoui, Bachir; Nomura, Asuka; Ahsan, Ishtiaq; Azam, Faisal; Berg, Gary; Brendler, Andrew; Zimmerman, Jeffrey; Faure, Tom

2006-03-01

With the nominal gate length at the 65 nm node being only 35 nm, controlling the critical dimension (CD) in polysilicon to within a few nanometers is essential to achieve a competitive power-to-performance ratio. Gate linewidths must be controlled, not only at the chip level so that the chip performs as the circuit designers and device engineers had intended, but also at the wafer level so that more chips with the optimum power-to-performance ratio are manufactured. Achieving tight across-chip linewidth variation (ACLV) and chip mean variation (CMV) is possible only if the mask-making, lithography, and etching processes are all controlled to very tight specifications. This paper identifies the various ACLV and CMV components, describes their root causes, and discusses a methodology to quantify them. For example, the site-to-site ACLV component is divided into systematic and random sub-components. The systematic component of the variation is attributed in part to pattern density variation across the field, and variation in exposure dose across the slit. The paper demonstrates our team's success in achieving the tight gate CD tolerances required for 65 nm technology. Certain key challenges faced, and methods employed to overcome them are described. For instance, the use of dose-compensation strategies to correct the small but systematic CD variations measured across the wafer, is described. Finally, the impact of immersion lithography on both ACLV and CMV is briefly discussed.

An investigation of modelling and design for software service applications.

PubMed

Anjum, Maria; Budgen, David

2017-01-01

Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the 'design model'. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model.

An investigation of modelling and design for software service applications

PubMed Central

2017-01-01

Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the ‘design model’. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model. PMID:28489905

Key components of financial-analysis education for clinical nurses.

PubMed

Lim, Ji Young; Noh, Wonjung

2015-09-01

In this study, we identified key components of financial-analysis education for clinical nurses. We used a literature review, focus group discussions, and a content validity index survey to develop key components of financial-analysis education. First, a wide range of references were reviewed, and 55 financial-analysis education components were gathered. Second, two focus group discussions were performed; the participants were 11 nurses who had worked for more than 3 years in a hospital, and nine components were agreed upon. Third, 12 professionals, including professors, nurse executive, nurse managers, and an accountant, participated in the content validity index. Finally, six key components of financial-analysis education were selected. These key components were as follows: understanding the need for financial analysis, introduction to financial analysis, reading and implementing balance sheets, reading and implementing income statements, understanding the concepts of financial ratios, and interpretation and practice of financial ratio analysis. The results of this study will be used to develop an education program to increase financial-management competency among clinical nurses. © 2015 Wiley Publishing Asia Pty Ltd.

Smart sensor technology for advanced launch vehicles

NASA Astrophysics Data System (ADS)

Schoess, Jeff

1989-07-01

Next-generation advanced launch vehicles will require improved use of sensor data and the management of multisensor resources to achieve automated preflight checkout, prelaunch readiness assessment and vehicle inflight condition monitoring. Smart sensor technology is a key component in meeting these needs. This paper describes the development of a smart sensor-based condition monitoring system concept referred to as the Distributed Sensor Architecture. A significant event and anomaly detection scheme that provides real-time condition assessment and fault diagnosis of advanced launch system rocket engines is described. The design and flight test of a smart autonomous sensor for Space Shuttle structural integrity health monitoring is presented.

Electro-optic architecture for servicing sensors and actuators in advanced aircraft propulsion systems

NASA Technical Reports Server (NTRS)

Poppel, G. L.; Glasheen, W. M.

1989-01-01

A detailed design of a fiber optic propulsion control system, integrating favored sensors and electro-optics architecture is presented. Layouts, schematics, and sensor lists describe an advanced fighter engine system model. Components and attributes of candidate fiber optic sensors are identified, and evaluation criteria are used in a trade study resulting in favored sensors for each measurand. System architectural ground rules were applied to accomplish an electro-optics architecture for the favored sensors. A key result was a considerable reduction in signal conductors. Drawings, schematics, specifications, and printed circuit board layouts describe the detailed system design, including application of a planar optical waveguide interface.

Cost effective launch operations of the SSME

NASA Technical Reports Server (NTRS)

Klatt, F. P.

1985-01-01

The Space Shuttle Main Engine (SSME) represents the beginning of reusable rocket engine operations in the space transportation system (STS). Steps taken to reduce the overall cost of flight operations of the SSME by improving turnaround operations, extending the life of the engine, and improving the cost effectiveness of overhaul operations at the Canoga Park home plant are described. Ground certification testing to ensure safe launch operations is described, as well as certification extension testing that leads to a service life equivalent to 40 flights. The proven flight record of the SSME, which has demonstrated the utility of the SSME as a key component of America's space transportation system, is discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, Jih-Sheng

This paper introduces control system design based softwares, SIMNON and MATLAB/SIMULINK, for power electronics system simulation. A complete power electronics system typically consists of a rectifier bridge along with its smoothing capacitor, an inverter, and a motor. The system components, featuring discrete or continuous, linear or nonlinear, are modeled in mathematical equations. Inverter control methods,such as pulse-width-modulation and hysteresis current control, are expressed in either computer algorithms or digital circuits. After describing component models and control methods, computer programs are then developed for complete systems simulation. Simulation results are mainly used for studying system performances, such as input and outputmore » current harmonics, torque ripples, and speed responses. Key computer programs and simulation results are demonstrated for educational purposes.« less

Composite armored vehicle advanced technology demonstator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ostberg, D.T.; Dunfee, R.S.; Thomas, G.E.

1996-12-31

Composite structures are a key technology needed to develop future lightweight combat vehicles that are both deployable and survivable. The Composite Armored Vehicle Advanced Technology Demonstrator Program that started in fiscal year 1994 will continue through 1998 to verily that composite structures are a viable solution for ground combat vehicles. Testing thus far includes material characterization, structural component tests and full scale quarter section tests. Material and manufacturing considerations, tests, results and changes, and the status of the program will be described. The structural component tests have been completed successfully, and quarter section testing is in progress. Upon completion ofmore » the critical design review, the vehicle demonstrator will be Fabricated and undergo government testing.« less

Recommendations for managing patients with diabetes mellitus in cardiopulmonary rehabilitation: an American Association of Cardiovascular and Pulmonary Rehabilitation statement.

PubMed

Lopez-Jimenez, Francisco; Kramer, Valerie Carroll; Masters, Barbara; Stuart, Patricia Mickey W; Mullooly, Cathy; Hinshaw, Ling; Haas, Linda; Warwick, Kathy

2012-01-01

Diabetes mellitus is a highly prevalent condition in patients participating in cardiopulmonary rehabilitation. However, research and subsequent guidelines specifically applicable to patients with diabetes, participating in cardiopulmonary rehabilitation, are limited. Recognizing this limitation, the American Association of Cardiovascular and Pulmonary Rehabilitation (AACVPR) initiated this statement, with the goal of developing a template that incorporated recommendations provided in the AACVPR Core Components and the American Association of Diabetes Educators 7 Self-Care Behaviors. This statement describes key processes regarding evaluation, interventions, and expected outcomes in each of the core components for the management of patients with diabetes in a cardiopulmonary rehabilitation program.

A new VOX technique for reducing noise in voice communication systems. [voice operated keying

NASA Technical Reports Server (NTRS)

Morris, C. F.; Morgan, W. C.; Shack, P. E.

1974-01-01

A VOX technique for reducing noise in voice communication systems is described which is based on the separation of voice signals into contiguous frequency-band components with the aid of an adaptive VOX in each band. It is shown that this processing scheme can effectively reduce both wideband and narrowband quasi-periodic noise since the threshold levels readjust themselves to suppress noise that exceeds speech components in each band. Results are reported for tests of the adaptive VOX, and it is noted that improvements can still be made in such areas as the elimination of noise pulses, phoneme reproduction at high-noise levels, and the elimination of distortion introduced by phase delay.

Sea Ice Biogeochemistry: A Guide for Modellers

PubMed Central

Tedesco, Letizia; Vichi, Marcello

2014-01-01

Sea ice is a fundamental component of the climate system and plays a key role in polar trophic food webs. Nonetheless sea ice biogeochemical dynamics at large temporal and spatial scales are still rarely described. Numerical models may potentially contribute integrating among sparse observations, but available models of sea ice biogeochemistry are still scarce, whether their relevance for properly describing the current and future state of the polar oceans has been recently addressed. A general methodology to develop a sea ice biogeochemical model is presented, deriving it from an existing validated model application by extension of generic pelagic biogeochemistry model parameterizations. The described methodology is flexible and considers different levels of ecosystem complexity and vertical representation, while adopting a strategy of coupling that ensures mass conservation. We show how to apply this methodology step by step by building an intermediate complexity model from a published realistic application and applying it to analyze theoretically a typical season of first-year sea ice in the Arctic, the one currently needing the most urgent understanding. The aim is to (1) introduce sea ice biogeochemistry and address its relevance to ocean modelers of polar regions, supporting them in adding a new sea ice component to their modelling framework for a more adequate representation of the sea ice-covered ocean ecosystem as a whole, and (2) extend our knowledge on the relevant controlling factors of sea ice algal production, showing that beyond the light and nutrient availability, the duration of the sea ice season may play a key-role shaping the algal production during the on going and upcoming projected changes. PMID:24586604

Precondensed matter - Key to the early solar system

NASA Technical Reports Server (NTRS)

Clayton, D. D.

1978-01-01

Explicit astrophysical details are developed for the hypothesis that chemical and isotopic anomalies in primitive solar-system samples reflect routine initial chemical conditions within precondensed matter. The central feature of this theory concerns the chemical state of presolar dust, which is regarded as never having been vaporized in the region where the most chemically primitive samples (carbonaceous meteorites) accumulated. It is suggested that the initial chemical state of heavy atoms during meteorite and planetary accumulation was distributed between a refractory-mineral component from high-temperature condensation and a volatile component resulting from cold matter adhering to preexisting grains. Thermal conditions in the solar nebula are considered along with the existence of supernova condensates and other thermal condensates in the interstellar dust. Fractionation into volatile and refractory elements is idealized in terms of four distinct interstellar components, and the fractionated precondensed matter is described.

Improved Rainfall Estimates and Predictions for 21st Century Drought Early Warning

NASA Technical Reports Server (NTRS)

Funk, Chris; Peterson, Pete; Shukla, Shraddhanand; Husak, Gregory; Landsfeld, Marty; Hoell, Andrew; Pedreros, Diego; Roberts, J. B.; Robertson, F. R.; Tadesse, Tsegae;

Effects of "D"-Amphetamine and Ethanol on Variable and Repetitive Key-Peck Sequences in Pigeons

ERIC Educational Resources Information Center

Ward, Ryan D.; Bailey, Ericka M.; Odum, Amy L.

2006-01-01

This experiment assessed the effects of "d"-Amphetamine and ethanol on reinforced variable and repetitive key-peck sequences in pigeons. Pigeons responded on two keys under a multiple schedule of Repeat and Vary components. In the Repeat component, completion of a target sequence of right, right, left, left resulted in food. In the Vary component,…

Integration of magnetic bearings in the design of advanced gas turbine engines

NASA Technical Reports Server (NTRS)

Storace, Albert F.; Sood, Devendra K.; Lyons, James P.; Preston, Mark A.

1994-01-01

Active magnetic bearings provide revolutionary advantages for gas turbine engine rotor support. These advantages include tremendously improved vibration and stability characteristics, reduced power loss, improved reliability, fault-tolerance, and greatly extended bearing service life. The marriage of these advantages with innovative structural network design and advanced materials utilization will permit major increases in thrust to weight performance and structural efficiency for future gas turbine engines. However, obtaining the maximum payoff requires two key ingredients. The first key ingredient is the use of modern magnetic bearing technologies such as innovative digital control techniques, high-density power electronics, high-density magnetic actuators, fault-tolerant system architecture, and electronic (sensorless) position estimation. This paper describes these technologies. The second key ingredient is to go beyond the simple replacement of rolling element bearings with magnetic bearings by incorporating magnetic bearings as an integral part of the overall engine design. This is analogous to the proper approach to designing with composites, whereby the designer tailors the geometry and load carrying function of the structural system or component for the composite instead of simply substituting composites in a design originally intended for metal material. This paper describes methodologies for the design integration of magnetic bearings in gas turbine engines.

Somatotype tendency in Chilean adolescents from Valparaíso: review from 1979 to 2011.

PubMed

Lizana, Pablo A; Olivares, Rossy; Berral, Francisco J

2014-12-17

A good tool to determine the biotype of growing and developing subjects that has been observed is the somatotype (ST). Objetive: This research study aims to describe the ST tendency in Chilean adolescents along the years. The bibliographic review was carried out using data from Medline, ISI Web of Knowledge, and SciELO. The key words used for the search were: somatotype, somatotyping, adolescent (in English and Spanish). The selected articles must describe ST in Chilean adolescents between 15 and 18 years of age. The graphic representation was made through a somato-chart and the series ST. To analyze the trajectory of the ST, the moving average method was used (SM), and the tendency line (lineal; TL), which expresses the data direction and projection. Eight articles complied with the inclusion criteria. Samples of students between 1979 and 2011 from the Regions of Valparaíso, Araucanía, and the Metropolitan region of Chile were reported. All studies correspond to transversal samples. The authors cite and/or describe the Heath-Carter anthropometric methods to assess the ST. The results showed positive TL for the endomorph component in all ages and genders. The mesomorph component maintained in male, unlike the female's component, which was negative except for the one at 18 years old. SM trajectory describes a regularity of the mesomorphic endomorph profile in female, yet with an increase in the endomorphy. In male, a change was observed from an ectomorphic mesomorph to endomorphic mesomorph. This progressive rise of the adipose component in both genders increases the risk of suffering non-communicable diseases. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites

NASA Technical Reports Server (NTRS)

Grady, Joseph E.; Haller, William J.; Poinsatte, Philip E.; Halbig, Michael C.; Schnulo, Sydney L.; Singh, Mrityunjay; Weir, Don; Wali, Natalie; Vinup, Michael; Jones, Michael G.;

The data embedding method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandford, M.T. II; Bradley, J.N.; Handel, T.G.

Data embedding is a new steganographic method for combining digital information sets. This paper describes the data embedding method and gives examples of its application using software written in the C-programming language. Sandford and Handel produced a computer program (BMPEMBED, Ver. 1.51 written for IBM PC/AT or compatible, MS/DOS Ver. 3.3 or later) that implements data embedding in an application for digital imagery. Information is embedded into, and extracted from, Truecolor or color-pallet images in Microsoft{reg_sign} bitmap (.BMP) format. Hiding data in the noise component of a host, by means of an algorithm that modifies or replaces the noise bits,more » is termed {open_quote}steganography.{close_quote} Data embedding differs markedly from conventional steganography, because it uses the noise component of the host to insert information with few or no modifications to the host data values or their statistical properties. Consequently, the entropy of the host data is affected little by using data embedding to add information. The data embedding method applies to host data compressed with transform, or {open_quote}lossy{close_quote} compression algorithms, as for example ones based on discrete cosine transform and wavelet functions. Analysis of the host noise generates a key required for embedding and extracting the auxiliary data from the combined data. The key is stored easily in the combined data. Images without the key cannot be processed to extract the embedded information. To provide security for the embedded data, one can remove the key from the combined data and manage it separately. The image key can be encrypted and stored in the combined data or transmitted separately as a ciphertext much smaller in size than the embedded data. The key size is typically ten to one-hundred bytes, and it is in data an analysis algorithm.« less

Data embedding method

NASA Astrophysics Data System (ADS)

Sandford, Maxwell T., II; Bradley, Jonathan N.; Handel, Theodore G.

1996-01-01

Data embedding is a new steganographic method for combining digital information sets. This paper describes the data embedding method and gives examples of its application using software written in the C-programming language. Sandford and Handel produced a computer program (BMPEMBED, Ver. 1.51 written for IBM PC/AT or compatible, MS/DOS Ver. 3.3 or later) that implements data embedding in an application for digital imagery. Information is embedded into, and extracted from, Truecolor or color-pallet images in MicrosoftTM bitmap (BMP) format. Hiding data in the noise component of a host, by means of an algorithm that modifies or replaces the noise bits, is termed `steganography.' Data embedding differs markedly from conventional steganography, because it uses the noise component of the host to insert information with few or no modifications to the host data values or their statistical properties. Consequently, the entropy of the host data is affected little by using data embedding to add information. The data embedding method applies to host data compressed with transform, or `lossy' compression algorithms, as for example ones based on discrete cosine transform and wavelet functions. Analysis of the host noise generates a key required for embedding and extracting the auxiliary data from the combined data. The key is stored easily in the combined data. Images without the key cannot be processed to extract the embedded information. To provide security for the embedded data, one can remove the key from the combined data and manage it separately. The image key can be encrypted and stored in the combined data or transmitted separately as a ciphertext much smaller in size than the embedded data. The key size is typically ten to one-hundred bytes, and it is derived from the original host data by an analysis algorithm.

Distributed Drug Discovery, Part 2: Global Rehearsal of Alkylating Agents for the Synthesis of Resin-Bound Unnatural Amino Acids and Virtual D3 Catalog Construction

PubMed Central

2008-01-01

Distributed Drug Discovery (D3) proposes solving large drug discovery problems by breaking them into smaller units for processing at multiple sites. A key component of the synthetic and computational stages of D3 is the global rehearsal of prospective reagents and their subsequent use in the creation of virtual catalogs of molecules accessible by simple, inexpensive combinatorial chemistry. The first section of this article documents the feasibility of the synthetic component of Distributed Drug Discovery. Twenty-four alkylating agents were rehearsed in the United States, Poland, Russia, and Spain, for their utility in the synthesis of resin-bound unnatural amino acids 1, key intermediates in many combinatorial chemistry procedures. This global reagent rehearsal, coupled to virtual library generation, increases the likelihood that any member of that virtual library can be made. It facilitates the realistic integration of worldwide virtual D3 catalog computational analysis with synthesis. The second part of this article describes the creation of the first virtual D3 catalog. It reports the enumeration of 24 416 acylated unnatural amino acids 5, assembled from lists of either rehearsed or well-precedented alkylating and acylating reagents, and describes how the resulting catalog can be freely accessed, searched, and downloaded by the scientific community. PMID:19105725

Acetogenesis and the Wood-Ljungdahl Pathway of CO2 Fixation

PubMed Central

Ragsdale, Stephen W.; Pierce, Elizabeth

2008-01-01

I. Summary Conceptually, the simplest way to synthesize an organic molecule is to construct it one carbon at a time. The Wood-Ljungdahl pathway of CO2 fixation involves this type of stepwise process. The biochemical events that underlie the condensation of two one-carbon units to form the two-carbon compound, acetate, have intrigued chemists, biochemists, and microbiologists for many decades. We begin this review with a description of the biology of acetogenesis. Then, we provide a short history of the important discoveries that have led to the identification of the key components and steps of this usual mechanism of CO and CO2 fixation. In this historical perspective, we have included reflections that hopefully will sketch the landscape of the controversies, hypotheses, and opinions that led to the key experiments and discoveries. We then describe the properties of the genes and enzymes involved in the pathway and conclude with a section describing some major questions that remain unanswered. PMID:18801467

An Agent-Based Modeling Framework and Application for the Generic Nuclear Fuel Cycle

NASA Astrophysics Data System (ADS)

Gidden, Matthew J.

Key components of a novel methodology and implementation of an agent-based, dynamic nuclear fuel cycle simulator, Cyclus , are presented. The nuclear fuel cycle is a complex, physics-dependent supply chain. To date, existing dynamic simulators have not treated constrained fuel supply, time-dependent, isotopic-quality based demand, or fuel fungibility particularly well. Utilizing an agent-based methodology that incorporates sophisticated graph theory and operations research techniques can overcome these deficiencies. This work describes a simulation kernel and agents that interact with it, highlighting the Dynamic Resource Exchange (DRE), the supply-demand framework at the heart of the kernel. The key agent-DRE interaction mechanisms are described, which enable complex entity interaction through the use of physics and socio-economic models. The translation of an exchange instance to a variant of the Multicommodity Transportation Problem, which can be solved feasibly or optimally, follows. An extensive investigation of solution performance and fidelity is then presented. Finally, recommendations for future users of Cyclus and the DRE are provided.

Pediatric Care Coordination: Lessons Learned and Future Priorities.

PubMed

Cady, Rhonda G; Looman, Wendy S; Lindeke, Linda L; LaPlante, Bonnie; Lundeen, Barbara; Seeley, Amanda; Kautto, Mary E

2015-09-30

A fundamental component of the medical home model is care coordination. In Minnesota, this model informed design and implementation of the state's health care home (HCH) model, a key element of statewide healthcare reform legislation. Children with medical complexity (CMC) often require care from multiple specialists and community resources. Coordinating this multi-faceted care within the HCH is challenging. This article describes the need for specialized models of care coordination for CMC. Two models of care coordination for CMC were developed to address this challenge. The TeleFamilies Model of Pediatric Care Coordination uses an advanced practice registered nurse care (APRN) coordinator embedded within an established HCH. The PRoSPer Model of Pediatric Care Coordination uses a registered nurse/social worker care coordinator team embedded within a specialty care system. We describe key findings from implementation of these models, and conclude with lessons learned. Replication of the models is encouraged to increase the evidence base for care coordination for the growing population of children with medical complexities.

Building Community Resilience to Disasters: A Way Forward to Enhance National Health Security.

PubMed

Chandra, Anita; Acosta, Joie; Howard, Stefanie; Uscher-Pines, Lori; Williams, Malcolm; Yeung, Douglas; Garnett, Jeffrey; Meredith, Lisa S

2011-01-01

Community resilience, or the sustained ability of a community to withstand and recover from adversity, has become a key policy issue at federal, state, and local levels, including in the National Health Security Strategy. Because resources are limited in the wake of an emergency, it is increasingly recognized that resilience is critical to a community's ability to reduce long recovery periods after an emergency. This article shares details of a report that provides a roadmap for federal, state, and local leaders who are developing plans to enhance community resilience for health security threats and describes options for building community resilience in key areas. Based on findings from a literature review and a series of community and regional focus groups, the authors provide a definition of community resilience in the context of national health security and a set of eight levers and five core components for building resilience. They then describe suggested activities that communities are pursuing and may want to strengthen for community resilience, and they identify challenges to implementation.

Building Community Resilience to Disasters

PubMed Central

Chandra, Anita; Acosta, Joie; Howard, Stefanie; Uscher-Pines, Lori; Williams, Malcolm; Yeung, Douglas; Garnett, Jeffrey; Meredith, Lisa S.

2011-01-01

Abstract Community resilience, or the sustained ability of a community to withstand and recover from adversity, has become a key policy issue at federal, state, and local levels, including in the National Health Security Strategy. Because resources are limited in the wake of an emergency, it is increasingly recognized that resilience is critical to a community's ability to reduce long recovery periods after an emergency. This article shares details of a report that provides a roadmap for federal, state, and local leaders who are developing plans to enhance community resilience for health security threats and describes options for building community resilience in key areas. Based on findings from a literature review and a series of community and regional focus groups, the authors provide a definition of community resilience in the context of national health security and a set of eight levers and five core components for building resilience. They then describe suggested activities that communities are pursuing and may want to strengthen for community resilience, and they identify challenges to implementation. PMID:28083162

Key-peck durations under behavioral contrast and differential reinforcement

PubMed Central

Whipple, William R.; Fantino, Edmund

1980-01-01

Pigeons were maintained on a multiple schedule in which both components were variable-interval one-minute schedules. When they were switched to a condition in which one component was extinction, behavioral contrast was observed. The median durations of the key pecks in the unchanged component did not decrease in size. The results are incompatible with a theory of behavioral contrast which considers the added pecks to be short-duration responses. In a second experiment, pigeons were required to emit short-duration key pecks in one component of a multiple schedule, and long-duration pecks in the other. Two of three pigeons learned to emit responses appropriate to the requirements of the component in effect, suggesting that the duration of the key-peck response is sensitive to differential reinforcement. PMID:16812185

Application of Intervention Mapping to develop a community-based health promotion pre-pregnancy intervention for adolescent girls in rural South Africa: Project Ntshembo (Hope)

PubMed Central

2014-01-01

Background South Africa (SA) is undergoing multiple transitions with an increasing burden of non-communicable diseases and high levels of overweight and obesity in adolescent girls and women. Adolescence is key to addressing trans-generational risk and a window of opportunity to intervene and positively impact on individuals’ health trajectories into adulthood. Using Intervention Mapping (IM), this paper describes the development of the Ntshembo intervention, which is intended to improve the health and well-being of adolescent girls in order to limit the inter-generational transfer of risk of metabolic disease, in particular diabetes risk. Methods This paper describes the application of the first four steps of IM. Evidence is provided to support the selection of four key behavioural objectives: viz. to eat a healthy, balanced diet, increase physical activity, reduce sedentary behaviour, and promote reproductive health. Appropriate behaviour change techniques are suggested and a theoretical framework outlining components of relevant behaviour change theories is presented. It is proposed that the Ntshembo intervention will be community-based, including specialist adolescent community health workers who will deliver a complex intervention comprising of individual, peer, family and community mobilisation components. Conclusions The Ntshembo intervention is novel, both in SA and globally, as it is: (1) based on strong evidence, extensive formative work and best practice from evaluated interventions; (2) combines theory with evidence to inform intervention components; (3) includes multiple domains of influence (community through to the individual); (4) focuses on an at-risk target group; and (5) embeds within existing and planned health service priorities in SA. PMID:25080940

A comparison of single-cycle versus multiple-cycle proof testing strategies

NASA Technical Reports Server (NTRS)

Hudak, S. J., Jr.; Mcclung, R. C.; Bartlett, M. L.; Fitzgerald, J. H.; Russell, D. A.

1990-01-01

An evaluation of single-cycle and multiple-cycle proof testing (MCPT) strategies for SSME components is described. Data for initial sizes and shapes of actual SSME hardware defects are analyzed statistically. Closed-form estimates of the J-integral for surface flaws are derived with a modified reference stress method. The results of load- and displacement-controlled stable crack growth tests on thin IN-718 plates with deep surface flaws are summarized. A J-resistance curve for the surface-cracked configuration is developed and compared with data from thick compact tension specimens. The potential for further crack growth during large unload/reload cycles is discussed, highlighting conflicting data in the literature. A simple model for ductile crack growth during MCPT based on the J-resistance curve is used to study the potential effects of key variables. The projected changes in the crack size distribution during MCPT depend on the interactions between several key parameters, including the number of proof cycles, the nature of the resistance curve, the initial crack size distribution, the component boundary conditions (load vs. displacement control), and the magnitude of the applied load or displacement. The relative advantages of single-cycle and multiple-cycle proof testing appear to be specific, therefore, to individual component geometry, material, and loading.

What Is Case Management? A Scoping and Mapping Review

PubMed Central

Millington, Michael; Salvador-Carulla, Luis

2016-01-01

The description of case management in research and clinical practice is highly variable which impedes quality analysis, policy and planning. Case management makes a unique contribution towards the integration of health care, social services and other sector services and supports for people with complex health conditions. There are multiple components and variations of case management depending on the context and client population. This paper aims to scope and map case management in the literature to identify how case management is described in the literature for key complex health conditions (e.g., brain injury, diabetes, mental health, spinal cord injury). Following literature searches in multiple databases, grey literature and exclusion by health condition, community-based and adequate description, there were 661 potential papers for data extraction. Data from 79 papers (1988–2013) were analysed to the point of saturation (no new information) and mapped to the model, components and activities. The results included 22 definitions, five models, with 69 activities or tasks of case managers mapped to 17 key components (interventions). The results confirm the significant terminological variance in case management which produces role confusion, ambiguity and hinders comparability across different health conditions and contexts. There is an urgent need for an internationally agreed taxonomy for the coordination, navigation and management of care. PMID:28413368

Collaboration-Centred Cities through Urban Apps Based on Open and User-Generated Data

PubMed Central

Aguilera, Unai; López-de-Ipiña, Diego; Pérez, Jorge

2016-01-01

This paper describes the IES Cities platform conceived to streamline the development of urban apps that combine heterogeneous datasets provided by diverse entities, namely, government, citizens, sensor infrastructure and other information data sources. This work pursues the challenge of achieving effective citizen collaboration by empowering them to prosume urban data across time. Particularly, this paper focuses on the query mapper; a key component of the IES Cities platform devised to democratize the development of open data-based mobile urban apps. This component allows developers not only to use available data, but also to contribute to existing datasets with the execution of SQL sentences. In addition, the component allows developers to create ad hoc storages for their applications, publishable as new datasets accessible by other consumers. As multiple users could be contributing and using a dataset, our solution also provides a data level permission mechanism to control how the platform manages the access to its datasets. We have evaluated the advantages brought forward by IES Cities from the developers’ perspective by describing an exemplary urban app created on top of it. In addition, we include an evaluation of the main functionalities of the query mapper. PMID:27376300

Collaboration-Centred Cities through Urban Apps Based on Open and User-Generated Data.

PubMed

Aguilera, Unai; López-de-Ipiña, Diego; Pérez, Jorge

2016-07-01

This paper describes the IES Cities platform conceived to streamline the development of urban apps that combine heterogeneous datasets provided by diverse entities, namely, government, citizens, sensor infrastructure and other information data sources. This work pursues the challenge of achieving effective citizen collaboration by empowering them to prosume urban data across time. Particularly, this paper focuses on the query mapper; a key component of the IES Cities platform devised to democratize the development of open data-based mobile urban apps. This component allows developers not only to use available data, but also to contribute to existing datasets with the execution of SQL sentences. In addition, the component allows developers to create ad hoc storages for their applications, publishable as new datasets accessible by other consumers. As multiple users could be contributing and using a dataset, our solution also provides a data level permission mechanism to control how the platform manages the access to its datasets. We have evaluated the advantages brought forward by IES Cities from the developers' perspective by describing an exemplary urban app created on top of it. In addition, we include an evaluation of the main functionalities of the query mapper.

Increased Reliability of Gas Turbine Components by Robust Coatings Manufacturing

NASA Astrophysics Data System (ADS)

Sharma, A.; Dudykevych, T.; Sansom, D.; Subramanian, R.

2017-08-01

The expanding operational windows of the advanced gas turbine components demand increasing performance capability from protective coating systems. This demand has led to the development of novel multi-functional, multi-materials coating system architectures over the last years. In addition, the increasing dependency of components exposed to extreme environment on protective coatings results in more severe penalties, in case of a coating system failure. This emphasizes that reliability and consistency of protective coating systems are equally important to their superior performance. By means of examples, this paper describes the effects of scatter in the material properties resulting from manufacturing variations on coating life predictions. A strong foundation in process-property-performance correlations as well as regular monitoring and control of the coating process is essential for robust and well-controlled coating process. Proprietary and/or commercially available diagnostic tools can help in achieving these goals, but their usage in industrial setting is still limited. Various key contributors to process variability are briefly discussed along with the limitations of existing process and product control methods. Other aspects that are important for product reliability and consistency in serial manufacturing as well as advanced testing methodologies to simplify and enhance product inspection and improve objectivity are briefly described.

A mixed method Poisson solver for three-dimensional self-gravitating astrophysical fluid dynamical systems

NASA Technical Reports Server (NTRS)

Duncan, Comer; Jones, Jim

1993-01-01

A key ingredient in the simulation of self-gravitating astrophysical fluid dynamical systems is the gravitational potential and its gradient. This paper focuses on the development of a mixed method multigrid solver of the Poisson equation formulated so that both the potential and the Cartesian components of its gradient are self-consistently and accurately generated. The method achieves this goal by formulating the problem as a system of four equations for the gravitational potential and the three Cartesian components of the gradient and solves them using a distributed relaxation technique combined with conventional full multigrid V-cycles. The method is described, some tests are presented, and the accuracy of the method is assessed. We also describe how the method has been incorporated into our three-dimensional hydrodynamics code and give an example of an application to the collision of two stars. We end with some remarks about the future developments of the method and some of the applications in which it will be used in astrophysics.

Growing-up just like everyone else: key components of a successful pediatric HIV disclosure intervention in Namibia

PubMed Central

Brandt, Laura; Beima-Sofie, Kristin; Hamunime, Ndapewa; Shepard, Mark; Ferris, Larissa; Ingo, Paulina; John-Stewart, Grace; O’Malley, Gabrielle

2018-01-01

Objectives To facilitate replication and adaptation of pediatric HIV disclosure interventions, we identified key components of a child-friendly cartoon book used to guide Namibian caregivers and healthcare workers (HCWs) through a gradual, structured disclosure process. Design Qualitative interviews were conducted with caregivers and HCWs from four high-volume pediatric HIV clinics in Namibia. Methods Semi-structured in-depth interviews with 35 HCWs and 64 caregivers of HIV+ children aged 7–15 were analyzed using constant comparative and modified grounded theory analysis. Major barriers to disclosure were compared to accounts of intervention success, and themes related to key components were identified. Results The disclosure book overcomes barriers to disclosure by reducing caregiver resistance, increasing HIV and disclosure knowledge, and providing a gradual, structured framework for disclosure. The delayed mention of HIV-specific terminology overcomes caregiver fears associated with HIV stigma, thus encouraging earlier uptake of disclosure initiation. Caregivers value the book’s focus on staying healthy, keeping the body strong, and having a future ‘like other kids’, thus capitalizing on evidence of the positive benefits of resilience and hopefulness rather than the negative consequences of HIV. The book’s concepts and images resonate with children who readily adopt the language of ‘body soldiers’ and ‘bad guys’ in describing how important it is for them to take their medicine. Discussion cues ease communication between HCWs, caregivers, and pediatric patients. Conclusion Given the urgent need for available pediatric HIV disclosure interventions, easily implementable tools like the Namibian disclosure book should be evaluated for utility in similar settings. PMID:26049542

Growing-up just like everyone else: key components of a successful pediatric HIV disclosure intervention in Namibia.

PubMed

Brandt, Laura; Beima-Sofie, Kristin; Hamunime, Ndapewa; Shepard, Mark; Ferris, Larissa; Ingo, Paulina; John-Stewart, Grace; O'Malley, Gabrielle

2015-06-01

To facilitate replication and adaptation of pediatric HIV disclosure interventions, we identified key components of a child-friendly cartoon book used to guide Namibian caregivers and healthcare workers (HCWs) through a gradual, structured disclosure process. Qualitative interviews were conducted with caregivers and HCWs from four high-volume pediatric HIV clinics in Namibia. Semi-structured in-depth interviews with 35 HCWs and 64 caregivers of HIV+ children aged 7-15 were analyzed using constant comparative and modified grounded theory analysis. Major barriers to disclosure were compared to accounts of intervention success, and themes related to key components were identified. The disclosure book overcomes barriers to disclosure by reducing caregiver resistance, increasing HIV and disclosure knowledge, and providing a gradual, structured framework for disclosure. The delayed mention of HIV-specific terminology overcomes caregiver fears associated with HIV stigma, thus encouraging earlier uptake of disclosure initiation. Caregivers value the book's focus on staying healthy, keeping the body strong, and having a future 'like other kids', thus capitalizing on evidence of the positive benefits of resilience and hopefulness rather than the negative consequences of HIV. The book's concepts and images resonate with children who readily adopt the language of 'body soldiers' and 'bad guys' in describing how important it is for them to take their medicine. Discussion cues ease communication between HCWs, caregivers, and pediatric patients. Given the urgent need for available pediatric HIV disclosure interventions, easily implementable tools like the Namibian disclosure book should be evaluated for utility in similar settings.

Insights into the role of neuronal glucokinase

PubMed Central

De Backer, Ivan; Hussain, Sufyan S.; Gardiner, James V.

2016-01-01

Glucokinase is a key component of the neuronal glucose-sensing mechanism and is expressed in brain regions that control a range of homeostatic processes. In this review, we detail recently identified roles for neuronal glucokinase in glucose homeostasis and counterregulatory responses to hypoglycemia and in regulating appetite. We describe clinical implications from these advances in our knowledge, especially for developing novel treatments for diabetes and obesity. Further research required to extend our knowledge and help our efforts to tackle the diabetes and obesity epidemics is suggested. PMID:27189932

Optimizing nursing human resource planning in British Columbia.

PubMed

Lavieri, Mariel S; Puterman, Martin L

2009-06-01

This paper describes a linear programming hierarchical planning model that determines the optimal number of nurses to train, promote to management and recruit over a 20 year planning horizon to achieve specified workforce levels. Age dynamics and attrition rates of the nursing workforce are key model components. The model was developed to help policy makers plan a sustainable nursing workforce for British Columbia, Canada. An easy to use interface and considerable flexibility makes it ideal for scenario and "What-If?" analyses.

A system for programming experiments and for recording and analyzing data automatically1

PubMed Central

Herrick, Robert M.; Denelsbeck, John S.

1963-01-01

A system designed for use in complex operant conditioning experiments is described. Some of its key features are: (a) plugboards that permit the experimenter to change either from one program to another or from one analysis to another in less than a minute, (b) time-sharing of permanently-wired, electronic logic components, (c) recordings suitable for automatic analyses. Included are flow diagrams of the system and sample logic diagrams for programming experiments and for analyzing data. ImagesFig. 4. PMID:14055967

Properties of calcium-containing microparticles formed in the process of biomineralization of the human aortic wall

NASA Astrophysics Data System (ADS)

Zlatoustova, O. Yu; Vasilev, S. V.; Rudy, A. S.

2016-08-01

The results of the study of human aortic walls, subjected to different stages of mineralization are presented. By means of scanning electron microscopy and X-ray microanalysis the morphology, elemental composition and characteristics of the mineral component localization were investigated. The key differences in the initial, intermediate and final stages of pathological mineralization of the aorta wall were identified. The data obtained may be useful in describing the mechanism of biomineral deposits formation in human body.

Crop traceability and remote sensing in tree fruit

NASA Astrophysics Data System (ADS)

Perry, Eileen M.; Rupp, Richard; Davenport, Joan; Leal, Juliano; Pierce, Francis J.; Schulthess, Urs

2004-01-01

Fresh market fruit crops such as apples have not employed precision agriculture tools, partially due to the labor intensive nature of the cropping systems. In this paper we describe new research in the development of precision agriculture tools for tree fruit, including the ability to track spatially variable orchard data before harvest through to the packing plant. Remote sensing is a key component of this system, and remote sensing products are being evaluated for their usefulness in guiding orchard management.

An iterative requirements specification procedure for decision support systems.

PubMed

Brookes, C H

1987-08-01

Requirements specification is a key element in a DSS development project because it not only determines what is to be done, it also drives the evolution process. A procedure for requirements elicitation is described that is based on the decomposition of the DSS design task into a number of functions, subfunctions, and operators. It is postulated that the procedure facilitates the building of a DSS that is complete and integrates MIS, modelling and expert system components. Some examples given are drawn from the health administration field.

Universal feature in optical control of a p -wave Feshbach resonance

NASA Astrophysics Data System (ADS)

Peng, Peng; Zhang, Ren; Huang, Lianghui; Li, Donghao; Meng, Zengming; Wang, Pengjun; Zhai, Hui; Zhang, Peng; Zhang, Jing

2018-01-01

We report the experimental results on the optical control of a p -wave Feshbach resonance by utilizing a laser-driven bound-to-bound transition to shift the energy of a closed-channel molecule state. The magnetic field location for the p -wave resonance as a function of laser detuning can be captured by a simple formula with essentially one parameter, which describes how sensitively the resonance depends on the laser detuning. The key result of this work is to demonstrate, both experimentally and theoretically, that the ratio between this parameter for the m =0 component of the resonance and that for the m =±1 component, to a large extent, is universal. We also show that this optical control can create intriguing situations where interesting few- and many-body physics can occur, such as a p -wave resonance overlapping with an s -wave resonance or the three components of a p -wave resonance being degenerate.

SQUIRE 2.0 (Standards for QUality Improvement Reporting Excellence): Revised Publication Guidelines from a Detailed Consensus Process

PubMed Central

Ogrinc, Greg; Davies, Louise; Goodman, Daisy; Batalden, Paul; Davidoff, Frank; Stevens, David

2015-01-01

Since the publication of Standards for Quality Improvement Reporting Excellence (SQUIRE 1.0) guidelines in 2008, the science of the field has advanced considerably. In this manuscript we describe the development of SQUIRE 2.0 and its key components. We undertook the revision between 2012 and 2015, using 1) semistructured interviews and focus groups to evaluate SQUIRE 1.0 plus feedback from an international steering group; 2) two face-to-face consensus meetings to develop interim drafts; and 3) pilot testing with authors and a public comment period. SQUIRE 2.0 emphasizes the reporting of three key components of systematic efforts to improve the quality, value, and safety of health care: the use of formal and informal theory in planning, implementing, and evaluating improvement work; the context in which the work is done; and the study of the intervention(s). SQUIRE 2.0 is intended for reporting the range of methods used to improve health care, recognizing that they can be complex and multidimensional. It provides common ground to share these discoveries in the scholarly literature (www.squire-statement.org). PMID:26517437

SQUIRE 2.0 (Standards for QUality Improvement Reporting Excellence): revised publication guidelines from a detailed consensus process.

PubMed

Ogrinc, Greg; Davies, Louise; Goodman, Daisy; Batalden, Paul; Davidoff, Frank; Stevens, David

2015-01-01

In the past several years, the science of health care improvement has advanced considerably. In this article, we describe the development of SQUIRE 2.0 and its key components. We undertook the revision between 2012 and 2015 using (1) interviews and focus groups to evaluate SQUIRE 1.0 plus feedback from an international steering group, (2) face-to-face consensus meetings to develop interim drafts, and (3) pilot testing with authors and a public comment period. SQUIRE 2.0 emphasizes 3 key components of systematic efforts to improve the quality, value, and safety of health care: formal and informal theory in planning, implementing, and evaluating improvement work; the context in which the work is done; and the study of the intervention(s). SQUIRE 2.0 is intended for reporting the range of methods used to improve health care, recognizing that they can be complex and multidimensional. It provides common ground to share these discoveries in the scholarly literature (www.squire-statement.org). © The Author(s) 2015.

SQUIRE 2.0 (Standards for QUality Improvement Reporting Excellence): Revised Publication Guidelines from a Detailed Consensus Process.

PubMed

Ogrinc, Greg; Davies, Louise; Goodman, Daisy; Batalden, Paul; Davidoff, Frank; Stevens, David

2015-01-01

Since the publication of Standards for Quality Improvement Reporting Excellence (SQUIRE 1.0) guidelines in 2008, the science of the field has advanced considerably. In this manuscript we describe the development of SQUIRE 2.0 and its key components. We undertook the revision between 2012 and 2015, using 1) semistructured interviews and focus groups to evaluate SQUIRE 1.0 plus feedback from an international steering group; 2) two face-to-face consensus meetings to develop interim drafts; and 3) pilot testing with authors and a public comment period. SQUIRE 2.0 emphasizes the reporting of three key components of systematic efforts to improve the quality, value, and safety of health care: the use of formal and informal theory in planning, implementing, and evaluating improvement work; the context in which the work is done; and the study of the intervention(s). SQUIRE 2.0 is intended for reporting the range of methods used to improve health care, recognizing that they can be complex and multidimensional. It provides common ground to share these discoveries in the scholarly literature (www.squire-statement.org).

Documenting Models for Interoperability and Reusability ...

EPA Pesticide Factsheets

Many modeling frameworks compartmentalize science via individual models that link sets of small components to create larger modeling workflows. Developing integrated watershed models increasingly requires coupling multidisciplinary, independent models, as well as collaboration between scientific communities, since component-based modeling can integrate models from different disciplines. Integrated Environmental Modeling (IEM) systems focus on transferring information between components by capturing a conceptual site model; establishing local metadata standards for input/output of models and databases; managing data flow between models and throughout the system; facilitating quality control of data exchanges (e.g., checking units, unit conversions, transfers between software languages); warning and error handling; and coordinating sensitivity/uncertainty analyses. Although many computational software systems facilitate communication between, and execution of, components, there are no common approaches, protocols, or standards for turn-key linkages between software systems and models, especially if modifying components is not the intent. Using a standard ontology, this paper reviews how models can be described for discovery, understanding, evaluation, access, and implementation to facilitate interoperability and reusability. In the proceedings of the International Environmental Modelling and Software Society (iEMSs), 8th International Congress on Environmental Mod

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sleaford, Brad W.; Hurst, Aaron M.

This report describes the measurement, evaluation and incorporation of new -ray spectroscopic data into the Evaluated Nuclear Data File (ENDF) for nonproliferation applications. Analysis and processing techniques are described along with key deliverables that have been met over the course of this project. A total of nine new ENDF libraries have been submitted to the National Nuclear Data Center at the Brookhaven National Laboratory and are now available in the ENDF/B-VIII.beta2 release. Furthermore, this project has led to more than ten peer-reviewed publications and provided theses for ve graduate students. This project is a component of the NA-22 venture collaborationmore » on \\Correlated Nuclear Data in Fission Events" (LA14-V-CorrData-PD2Jb).« less

Resistance to reinforcement change in multiple and concurrent schedules assessed in transition and at steady state.

PubMed

McLean, A P; Blampied, N M

1995-01-01

Behavioral momentum theory relates resistance to change of responding in a multiple-schedule component to the total reinforcement obtained in that component, regardless of how the reinforcers are produced. Four pigeons responded in a series of multiple-schedule conditions in which a variable-interval 40-s schedule arranged reinforcers for pecking in one component and a variable-interval 360-s schedule arranged them in the other. In addition, responses on a second key were reinforced according to variable-interval schedules that were equal in the two components. In different parts of the experiment, responding was disrupted by changing the rate of reinforcement on the second key or by delivering response-independent food during a blackout separating the two components. Consistent with momentum theory, responding on the first key in Part 1 changed more in the component with the lower reinforcement total when it was disrupted by changes in the rate of reinforcement on the second key. However, responding on the second key changed more in the component with the higher reinforcement total. In Parts 2 and 3, responding was disrupted with free food presented during intercomponent blackouts, with extinction (Part 2) or variable-interval 80-s reinforcement (Part 3) arranged on the second key. Here, resistance to change was greater for the component with greater overall reinforcement. Failures of momentum theory to predict short-term differences in resistance to change occurred with disruptors that caused greater change between steady states for the richer component. Consistency of effects across disruptors may yet be found if short-term effects of disruptors are assessed relative to the extent of change observed after prolonged exposure.

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

NASA Technical Reports Server (NTRS)

Harper, R. E.; Alger, L. S.; Babikyan, C. A.; Butler, B. P.; Friend, S. A.; Ganska, R. J.; Lala, J. H.; Masotto, T. K.; Meyer, A. J.; Morton, D. P.

1992-01-01

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions.

Conducting a narrative analysis.

PubMed

Emden, C

1998-07-01

This paper describes the process of narrative analysis as undertaken within a nursing study on scholars and scholarship. If follows an earlier paper titled: Theoretical perspectives on narrative inquiry that described the influencing ideas of Bruner (1987) and Roof (1994) upon the same study. Analysis procedures are described here in sufficient detail for other researchers wishing to implement a similar approach to do so. The process as described has two main components: (A) strategies of 'core story creation' and 'employment'; and (B) issues and dilemmas of narrative analysis, especially relating to rigour. The ideas of Polkinghorne (1988), Mishler (1986), and Labov (in Mishler 1986a) are introduced in so far as they impinge upon the analysis process. These relate especially to the development of key terms, and to the analysis strategies of core story creation and employment. Outcomes of the study in question are termed 'Signposting the lived-world of scholarship'.

Planetary CubeSats Come of Age

NASA Technical Reports Server (NTRS)

Sherwood, Brent; Spangelo, Sara; Frick, Andreas; Castillo-Rogez, Julie; Klesh, Andrew; Wyatt, E. Jay; Reh, Kim; Baker, John

2015-01-01

Jet Propulsion Laboratory initiatives in developing and formulating planetary CubeSats are described. Six flight systems already complete or underway now at JPL for missions to interplanetary space, the Moon, a near-Earth asteroid, and Mars are described at the subsystem level. Key differences between interplanetary nanospacecraft and LEO CubeSats are explained, as well as JPL's adaptation of vendor components and development of system solutions to meet planetary-mission needs. Feasible technology-demonstration and science measurement objectives are described for multiple modes of planetary mission implementation. Seven planetary-science demonstration mission concepts, already proposed to NASA by Discovery-2014 PIs partnered with JPL, are described for investigations at Sun-Earth L5, Venus, NEA 1999 FG3, comet Tempel 2, Phobos, main-belt asteroid 24 Themis, and metal asteroid 16 Psyche. The JPL staff and facilities resources available to PIs for analysis, design, and development of planetary nanospacecraft are catalogued.

Parallel Three-Dimensional Computation of Fluid Dynamics and Fluid-Structure Interactions of Ram-Air Parachutes

NASA Technical Reports Server (NTRS)

Tezduyar, Tayfun E.

1998-01-01

This is a final report as far as our work at University of Minnesota is concerned. The report describes our research progress and accomplishments in development of high performance computing methods and tools for 3D finite element computation of aerodynamic characteristics and fluid-structure interactions (FSI) arising in airdrop systems, namely ram-air parachutes and round parachutes. This class of simulations involves complex geometries, flexible structural components, deforming fluid domains, and unsteady flow patterns. The key components of our simulation toolkit are a stabilized finite element flow solver, a nonlinear structural dynamics solver, an automatic mesh moving scheme, and an interface between the fluid and structural solvers; all of these have been developed within a parallel message-passing paradigm.

Zirconium hydride reactor control reflector systems: summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horton, P.H.; Kurzeka, W.J.

1972-06-30

The beryllium reflector control system development for SNAP reactors is documented, from the initial SNAP 10A System through the current 5-kW(e) Thermoelectric System. Described are the various reflector concepts used in these systems for shadowshielded and 4 pi -shielded nuclear systems. The development of the key components, such as the actuators, bearings, and drive mechanisms for these systems, is also traced from the SNAP 10A concept through to the current system. Developmental test results are outlined, showing the performance capability improvements made throughout the life of the SNAP programs. Component development was highly successful, as proven by a number ofmore » reactor systems tests, including the launch and operation of the SNAP 10A flight. 46 references. (auth)« less

WMAP Observatory Thermal Design and On-Orbit Thermal Performance

NASA Technical Reports Server (NTRS)

Glazer, Stuart D.; Brown, Kimberly D.; Michalek, Theodore J.; Ancarrow, Walter C.

2003-01-01

The Wilkinson Microwave Anisotropy Probe (WMAP) observatory, launched June 30, 2001, is designed to measure the cosmic microwave background radiation with unprecedented precision and accuracy while orbiting the second Lagrange point (L2). The instrument cold stage must be cooled passively to <95K, and systematic thermal variations in selected instrument components controlled to less than 0.5 mK (rms) per spin period. This paper describes the thermal design and testing of the WMAP spacecraft and instrument. Flight thermal data for key spacecraft and instrument components are presented from launch through the first year of mission operations. Effects of solar flux variation due to the Earth's elliptical orbit about the sun, surface thermo-optical property degradations, and solar flares on instrument thermal stability are discussed.

From big data to rich data: The key features of athlete wheelchair mobility performance.

PubMed

van der Slikke, R M A; Berger, M A M; Bregman, D J J; Veeger, H E J

2016-10-03

Quantitative assessment of an athlete׳s individual wheelchair mobility performance is one prerequisite needed to evaluate game performance, improve wheelchair settings and optimize training routines. Inertial Measurement Unit (IMU) based methods can be used to perform such quantitative assessment, providing a large number of kinematic data. The goal of this research was to reduce that large amount of data to a set of key features best describing wheelchair mobility performance in match play and present them in meaningful way for both scientists and athletes. To test the discriminative power, wheelchair mobility characteristics of athletes with different performance levels were compared. The wheelchair kinematics of 29 (inter-)national level athletes were measured during a match using three inertial sensors mounted on the wheelchair. Principal component analysis was used to reduce 22 kinematic outcomes to a set of six outcomes regarding linear and rotational movement; speed and acceleration; average and best performance. In addition, it was explored whether groups of athletes with known performance differences based on their impairment classification also differed with respect to these key outcomes using univariate general linear models. For all six key outcomes classification showed to be a significant factor (p<0.05). We composed a set of six key kinematic outcomes that accurately describe wheelchair mobility performance in match play. The key kinematic outcomes were displayed in an easy to interpret way, usable for athletes, coaches and scientists. This standardized representation enables comparison of different wheelchair sports regarding wheelchair mobility, but also evaluation at the level of an individual athlete. By this means, the tool could enhance further development of wheelchair sports in general. Copyright © 2016 Elsevier Ltd. All rights reserved.

Criteria and Planning Guidance for Ex-Plant Harvesting to Support Subsequent License Renewal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Devanathan, Ram; Meyer, Ryan M.

As U.S. nuclear power plants look to subsequent license renewal (SLR) to operate for a 20-year period beyond 60 years, the U.S. Nuclear Regulatory Commission and the industry will be addressing technical issues around the capability of long-lived passive components to meet their functionality objectives. A key challenge will be to better understand likely materials degradation mechanisms in these components and their impacts on component functionality and margins to safety. Research addressing many of the remaining technical gaps in these areas for SLR may greatly benefit from materials sampled from plants (decommissioned or operating). Because of the cost and inefficiencymore » of piecemeal sampling, there is a need for a strategic and systematic approach to sampling materials from structures, systems, and components (SSC) in both operating and decommissioned plants. This document describes a potential approach for sampling (harvesting) materials that focuses on prioritizing materials for sampling using a number of criteria. These criteria are based on an evaluation of technical gaps identified in the literature, research needs to address these technical gaps, and lessons learned from previous harvesting campaigns. The document also describes a process for planning future harvesting campaigns; such a plan would include an understanding of the harvesting priorities, available materials, and the planned use of the materials to address the technical gaps.« less

A first application of independent component analysis to extracting structure from stock returns.

PubMed

Back, A D; Weigend, A S

1997-08-01

This paper explores the application of a signal processing technique known as independent component analysis (ICA) or blind source separation to multivariate financial time series such as a portfolio of stocks. The key idea of ICA is to linearly map the observed multivariate time series into a new space of statistically independent components (ICs). We apply ICA to three years of daily returns of the 28 largest Japanese stocks and compare the results with those obtained using principal component analysis. The results indicate that the estimated ICs fall into two categories, (i) infrequent large shocks (responsible for the major changes in the stock prices), and (ii) frequent smaller fluctuations (contributing little to the overall level of the stocks). We show that the overall stock price can be reconstructed surprisingly well by using a small number of thresholded weighted ICs. In contrast, when using shocks derived from principal components instead of independent components, the reconstructed price is less similar to the original one. ICA is shown to be a potentially powerful method of analyzing and understanding driving mechanisms in financial time series. The application to portfolio optimization is described in Chin and Weigend (1998).

Botswana water and surface energy balance research program. Part 1: Integrated approach and field campaign results

NASA Technical Reports Server (NTRS)

Vandegriend, A. A.; Owe, M.; Vugts, H. F.; Ramothwa, G. K.

1992-01-01

The Botswana water and surface energy balance research program was developed to study and evaluate the integrated use of multispectral satellite remote sensing for monitoring the hydrological status of the Earth's surface. Results of the first part of the program (Botswana 1) which ran from 1 Jan. 1988 - 31 Dec. 1990 are summarized. Botswana 1 consisted of two major, mutually related components: a surface energy balance modeling component, built around an extensive field campaign; and a passive microwave research component which consisted of a retrospective study of large scale moisture conditions and Nimbus scanning multichannel microwave radiometer microwave signatures. The integrated approach of both components in general are described and activities performed during the surface energy modeling component including the extensive field campaign are summarized. The results of the passive microwave component are summarized. The key of the field campaign was a multilevel approach, whereby measurements by various similar sensors were made at several altitudes and resolution. Data collection was performed at two adjacent sites of contrasting surface character. The following measurements were made: micrometeorological measurements, surface temperatures, soil temperatures, soil moisture, vegetation (leaf area index and biomass), satellite data, aircraft data, atmospheric soundings, stomatal resistance, and surface emissivity.

Enhancing the Quantitative Representation of Socioeconomic Conditions in the Shared Socio-economic Pathways (SSPs) using the International Futures Model

NASA Astrophysics Data System (ADS)

Rothman, D. S.; Siraj, A.; Hughes, B.

2013-12-01

The international research community is currently in the process of developing new scenarios for climate change research. One component of these scenarios are the Shared Socio-economic Pathways (SSPs), which describe a set of possible future socioeconomic conditions. These are presented in narrative storylines with associated quantitative drivers. The core quantitative drivers include total population, average GDP per capita, educational attainment, and urbanization at the global, regional, and national levels. At the same time there have been calls, particularly by the IAV community, for the SSPs to include additional quantitative information on other key social factors, such as income inequality, governance, health, and access to key infrastructures, which are discussed in the narratives. The International Futures system (IFs), based at the Pardee Center at the University of Denver, is able to provide forecasts of many of these indicators. IFs cannot use the SSP drivers as exogenous inputs, but we are able to create development pathways that closely reproduce the core quantitative drivers defined by the different SSPs, as well as incorporating assumptions on other key driving factors described in the qualitative narratives. In this paper, we present forecasts for additional quantitative indicators based upon the implementation of the SSP development pathways in IFs. These results will be of value to many researchers.

Project oriented klystron developments in Japan, China and India

NASA Astrophysics Data System (ADS)

Fukuda, Shigeki

2017-12-01

Modern accelerators are based on the rf technology and the klystron is the one of key components. Some special accelerator projects require their specified klystrons i.e., project-oriented klystrons. In this paper, project-oriented klystron developments for a decade in Japan are described. Related projects are ILC, cERL and SKEKB. Usually klystron is very expensive but has a finite life and needs to procure again. Trial to introduce the compatible tubes and have a competitive tender to reduce the cost is described. At the same time, since an efficiency improvement is one of the recent trend, such an attempt is also presented. International klystron collaboration among the Asian countries has been performed for a long time. In this paper, collaboration with China and India is introduced. Since topics are covered mainly author's experience, related counties described are limited.

Key metabolites in tissue extracts of Elliptio complanata identified using 1H nuclear magnetic resonance spectroscopy

PubMed Central

Hurley-Sanders, Jennifer L.; Levine, Jay F.; Nelson, Stacy A. C.; Law, J. M.; Showers, William J.; Stoskopf, Michael K.

2015-01-01

We used 1H nuclear magnetic resonance spectroscopy to describe key metabolites of the polar metabolome of the freshwater mussel, Elliptio complanata. Principal components analysis documented variability across tissue types and river of origin in mussels collected from two rivers in North Carolina (USA). Muscle, digestive gland, mantle and gill tissues yielded identifiable but overlapping metabolic profiles. Variation in digestive gland metabolic profiles between the two mussel collection sites was characterized by differences in mono- and disaccharides. Variation in mantle tissue metabolomes appeared to be associated with sex. Nuclear magnetic resonance spectroscopy is a sensitive means to detect metabolites in the tissues of E. complanata and holds promise as a tool for the investigation of freshwater mussel health and physiology. PMID:27293708

Architecture of autonomous systems

NASA Technical Reports Server (NTRS)

Dikshit, Piyush; Guimaraes, Katia; Ramamurthy, Maya; Agrawala, Ashok; Larsen, Ronald L.

1986-01-01

Automation of Space Station functions and activities, particularly those involving robotic capabilities with interactive or supervisory human control, is a complex, multi-disciplinary systems design problem. A wide variety of applications using autonomous control can be found in the literature, but none of them seem to address the problem in general. All of them are designed with a specific application in mind. In this report, an abstract model is described which unifies the key concepts underlying the design of automated systems such as those studied by the aerospace contractors. The model has been kept as general as possible. The attempt is to capture all the key components of autonomous systems. With a little effort, it should be possible to map the functions of any specific autonomous system application to the model presented here.

Homogalacturonan methyl-esterification and plant development.

PubMed

Wolf, Sebastian; Mouille, Grégory; Pelloux, Jérome

2009-09-01

The ability of a plant cell to expand is largely defined by the physical constraints imposed by its cell wall. Accordingly, cell wall properties have to be regulated during development. The pectic polysaccharide homogalacturonan is a major component of the plant primary walls. Biosynthesis and in muro modification of homogalacturonan have recently emerged as key determinants of plant development, controlling cell adhesion, organ development, and phyllotactic patterning. This review will focus on recent findings regarding impact of homogalacturonan content and methyl-esterification status of this polymer on plant life. De-methyl-esterification of homogalacturonan occurs through the action of the ubiquitous enzyme 'pectin methyl-esterase'. We here describe various strategies developed by the plant to finely tune the methyl-esterification status of homogalacturonan along key events of the plant lifecycle.

Daily Readiness Huddles in Radiology-Improving Communication, Coordination, and Problem-Solving Reliability.

PubMed

Donnelly, Lane F

Deploying an intentional daily management process is a key part to create high-reliability culture. Key components described in the literature for a successfully daily management process include leadership standard work, visual controls, daily accountability processes, and the discipline to stick to the process over the long term. We believe that the institution of a daily readiness huddle has helped us better coordinate and communicate as a department and improved our ability to deliver imaging services on a daily basis. The daily readiness huddle has enabled us to more rapidly identify issues and has brought accountability to seeing solutions to those issues brought to fruition. In addition, it has helped with team building, including between the radiologists and the nonphysician staff. Copyright © 2017 Elsevier Inc. All rights reserved.

Architecture of autonomous systems

NASA Technical Reports Server (NTRS)

Dikshit, Piyush; Guimaraes, Katia; Ramamurthy, Maya; Agrawala, Ashok; Larsen, Ronald L.

1989-01-01

Automation of Space Station functions and activities, particularly those involving robotic capabilities with interactive or supervisory human control, is a complex, multi-disciplinary systems design problem. A wide variety of applications using autonomous control can be found in the literature, but none of them seem to address the problem in general. All of them are designed with a specific application in mind. In this report, an abstract model is described which unifies the key concepts underlying the design of automated systems such as those studied by the aerospace contractors. The model has been kept as general as possible. The attempt is to capture all the key components of autonomous systems. With a little effort, it should be possible to map the functions of any specific autonomous system application to the model presented here.

An Operationally Based Vision Assessment Simulator for Domes

NASA Technical Reports Server (NTRS)

Archdeacon, John; Gaska, James; Timoner, Samson

2012-01-01

The Operational Based Vision Assessment (OBVA) simulator was designed and built by NASA and the United States Air Force (USAF) to provide the Air Force School of Aerospace Medicine (USAFSAM) with a scientific testing laboratory to study human vision and testing standards in an operationally relevant environment. This paper describes the general design objectives and implementation characteristics of the simulator visual system being created to meet these requirements. A key design objective for the OBVA research simulator is to develop a real-time computer image generator (IG) and display subsystem that can display and update at 120 frame s per second (design target), or at a minimum, 60 frames per second, with minimal transport delay using commercial off-the-shelf (COTS) technology. There are three key parts of the OBVA simulator that are described in this paper: i) the real-time computer image generator, ii) the various COTS technology used to construct the simulator, and iii) the spherical dome display and real-time distortion correction subsystem. We describe the various issues, possible COTS solutions, and remaining problem areas identified by NASA and the USAF while designing and building the simulator for future vision research. We also describe the critically important relationship of the physical display components including distortion correction for the dome consistent with an objective of minimizing latency in the system. The performance of the automatic calibration system used in the dome is also described. Various recommendations for possible future implementations shall also be discussed.

Interventionist training and intervention fidelity monitoring and maintenance for CONNECT, a nurse-led primary palliative care in oncology trial.

PubMed

Robbins-Welty, Gregg A; Mueser, Lisa; Mitchell, Chandler; Pope, Nicole; Arnold, Robert; Park, SeoYoung; White, Doug; Smith, Kenneth J; Reynolds, Charles; Rosenzweig, Margaret; Bakitas, Marie; Schenker, Yael

2018-06-01

Intervention fidelity is a critical component of behavioral research that has received inadequate attention in palliative care studies. With increasing focus on the need for palliative care models that can be widely disseminated and delivered by non-specialists, rigorous yet pragmatic strategies for training interventionists and maintaining intervention fidelity are needed. (1) Describe components of a plan for interventionist training and monitoring and maintaining intervention fidelity as part of a primary palliative care trial (CONNECT) and (2) present data about perceived training effectiveness and delivery of key intervention content. Post-training evaluations, visit checklists, and visit audio-recordings. Data were collected from June, 2016 through April, 2017. We include procedures for (1) identification, training and certification of oncology nurses as CONNECT interventionists; (2) monitoring intervention delivery; and (3) maintaining intervention quality. All nurses (N = 14) felt prepared to deliver key competencies after a 3-day in-person training. As assessed via visit checklists, interventionists delivered an average of 94% (SD 13%) of key content for first intervention visits and 85% (SD 14%) for subsequent visits. As assessed via audio-recordings, interventionists delivered an average of 85% (SD 8%) of key content for initial visits and 85% (SD 12%) for subsequent visits. We present a 3-part strategy for training interventionists and monitoring and maintaining intervention delivery in a primary palliative care trial. Training was effective in having nurses feel prepared to deliver primary palliative care skills. As assessed via nursing checklists and visit audio-recordings, intervention fidelity was high.

Application of the Intervention Mapping protocol to develop Keys, a family child care home intervention to prevent early childhood obesity.

PubMed

Mann, Courtney M; Ward, Dianne S; Vaughn, Amber; Benjamin Neelon, Sara E; Long Vidal, Lenita J; Omar, Sakinah; Namenek Brouwer, Rebecca J; Østbye, Truls

2015-12-10

Many families rely on child care outside the home, making these settings important influences on child development. Nearly 1.5 million children in the U.S. spend time in family child care homes (FCCHs), where providers care for children in their own residences. There is some evidence that children in FCCHs are heavier than those cared for in centers. However, few interventions have targeted FCCHs for obesity prevention. This paper will describe the application of the Intervention Mapping (IM) framework to the development of a childhood obesity prevention intervention for FCCHs Following the IM protocol, six steps were completed in the planning and development of an intervention targeting FCCHs: needs assessment, formulation of change objectives matrices, selection of theory-based methods and strategies, creation of intervention components and materials, adoption and implementation planning, and evaluation planning Application of the IM process resulted in the creation of the Keys to Healthy Family Child Care Homes program (Keys), which includes three modules: Healthy You, Healthy Home, and Healthy Business. Delivery of each module includes a workshop, educational binder and tool-kit resources, and four coaching contacts. Social Cognitive Theory and Self-Determination Theory helped guide development of change objective matrices, selection of behavior change strategies, and identification of outcome measures. The Keys program is currently being evaluated through a cluster-randomized controlled trial The IM process, while time-consuming, enabled rigorous and systematic development of intervention components that are directly tied to behavior change theory and may increase the potential for behavior change within the FCCHs.

'Governance of' and 'Governance by': implementing a clinical governance framework in an area mental health service.

PubMed

O'Connor, Nick; Paton, Michael

2008-04-01

A framework developed to promote the understanding and application of clinical governance principles in an area mental health service is described. The framework is operationalized through systems, processes, roles and responsibilities. The development of an explicit and operationalizable framework for clinical governance arose from the authors' experiences in leading and managing mental health services. There is a particular emphasis on improvement of quality of care and patient safety. The framework is informed by recent developments in thinking about clinical governance, including key documents from Australia and the United Kingdom. The operational nature of the framework allows for key components of clinical governance to be described explicitly, communicated effectively, and continually tested and improved. Further consideration and assessment of the value of differing approaches to this task are required. For example, a general, illustrative approach to raise clinician awareness can be contrasted with prescriptive and specified approaches which progressively encompass the many functions and processes of a mental health service. Mental health clinicians and managers can be guided by a framework that will ensure safe, high quality and continually improving processes of care.

Advanced Design Heat PumpRadiator for EVA Suits

NASA Technical Reports Server (NTRS)

Izenson, Michael G.; Chen, Weibo; Passow, Christian; Phillips, Scott; Trevino, Luis

2009-01-01

Absorption cooling using a LiCl/water heat pump can enable lightweight and effective thermal control for EVA suits without venting water to the environment. The key components in the system are an absorber/radiator that rejects heat to space and a flexible evaporation cooling garment that absorbs heat from the crew member. This paper describes progress in the design, development, and testing of the absorber/radiator and evaporation cooling garment. New design concepts and fabrication approaches will significantly reduce the mass of the absorber/radiator. We have also identified materials and demonstrated fabrication approaches for production of a flexible evaporation cooling garment. Data from tests of the absorber/radiator s modular components have validated the design models and allowed predictions of the size and weight of a complete system.

Passive micromixer using by convection and surface tension effects with air-liquid interface.

PubMed

Ju, Jongil; Warrick, Jay

2013-12-01

This article describes a passive micromixer that utilizes an air-liquid interface and surface tension effects to enhance fluid mixing via convection and Marangoni effects. Performance of the microfluidic component is tested within a passive-pumping-based device that consists of three microchannels connected in succession using passive micro-mixers. Mixing was quantified at 5 key points along the length of the device using microscope images of patterned streams of Alexa 488 fluorescent-dyed water and pure DI water flowing through the device. The passive micro-mixer mixed fluid 15-20 times more effectively than diffusion between laminar flow streams alone and is a novel micro-mixer embodiment that provides an additional strategy for removing external components from microscale devices for simpler, autonomous operation.

Passive micromixer using by convection and surface tension effects with air-liquid interface

PubMed Central

Ju, Jongil; Warrick, Jay

2014-01-01

This article describes a passive micromixer that utilizes an air-liquid interface and surface tension effects to enhance fluid mixing via convection and Marangoni effects. Performance of the microfluidic component is tested within a passive-pumping-based device that consists of three microchannels connected in succession using passive micro-mixers. Mixing was quantified at 5 key points along the length of the device using microscope images of patterned streams of Alexa 488 fluorescent-dyed water and pure DI water flowing through the device. The passive micro-mixer mixed fluid 15–20 times more effectively than diffusion between laminar flow streams alone and is a novel micro-mixer embodiment that provides an additional strategy for removing external components from microscale devices for simpler, autonomous operation. PMID:25104979

Novel folding device for manufacturing aerospace composite structures

NASA Astrophysics Data System (ADS)

Tewfic, Tarik; Sarhadi, M.

2000-10-01

A new manufacturing methodology, termed shape-inclusive lay-up has been applied that allows the generation of three-dimensional preforms for the resin transfer molding (RTM) process. A flexible novel folding device for forming dry fabrics including non-crimp fabric (NCF) preform is designed and integrated with a Material Delivery System (MDS) into a robotic cell for manufacturing dry fiber composite aerospace components. The paper describes detailed design, implementation and operational performance of a prototype device. The proposed folding device has been implemented and tested by manufacturing a range of reinforcement structure preforms (C,T,J and I reinforcement preforms), normally used in aerostructure applications. A key advantage of the proposed device is its flexibility. The system is capable of manufacturing a wide range of components of various sizes without the need for reconfiguration.

Development of High-Z Materials with Improved Toughness for High Heat Flux Components

NASA Astrophysics Data System (ADS)

Kurishita, Hiroaki; Kitsunai, Yuji; Kuwabara, Tetsuya; Hasegawa, Masayuki; Hiraoka, Yutaka; Takida, Tomohiro; Igarashi, Tadashi

Tungsten is superior to other materials in physical and mechanical properties for use as high heat flux components in future fusion reactors. The key issue of the metal is to improve the low temperature embrittlement, the recrystallization embrittlement and the irradiation embrittlement. An alloy design and microstructure control for achieving simultaneous and significant improvements in those embrittlements are described and are applied to tungsten and molybdenum which has quite similar properties as tungsten. The result of the application is presented for each of the embrittlement, with considerable success. Emphasis is placed on the occurrence of RIDU (Radiation Induced Ductilization) because RIDU is expected to provide the scenario to overcome severe irradiation embrittlement that is the most crucial problem for structure materials exposed in fusion environment.

Development of a US Gravitational Wave Laser System for LISA

NASA Technical Reports Server (NTRS)

Camp, Jordan B.; Numata, Kenji

2015-01-01

A highly stable and robust laser system is a key component of the space-based LISA mission architecture.In this talk I will describe our plans to demonstrate a TRL 5 LISA laser system at Goddard Space Flight Center by 2016.The laser system includes a low-noise oscillator followed by a power amplifier. The oscillator is a low-mass, compact 10mW External Cavity Laser, consisting of a semiconductor laser coupled to an optical cavity, built by the laser vendorRedfern Integrated Optics. The amplifier is a diode-pumped Yb fiber with 2W output, built at Goddard. I will show noiseand reliability data for the full laser system, and describe our plans to reach TRL 5 by 2016.

Methods to Assess Mitochondrial Morphology in Mammalian Cells Mounting Autophagic or Mitophagic Responses.

PubMed

Marchi, S; Bonora, M; Patergnani, S; Giorgi, C; Pinton, P

2017-01-01

It is widely acknowledged that mitochondria are highly active structures that rapidly respond to cellular and environmental perturbations by changing their shape, number, and distribution. Mitochondrial remodeling is a key component of diverse biological processes, ranging from cell cycle progression to autophagy. In this chapter, we describe different methodologies for the morphological study of the mitochondrial network. Instructions are given for the preparation of samples for fluorescent microscopy, based on genetically encoded strategies or the employment of synthetic fluorescent dyes. We also propose detailed protocols to analyze mitochondrial morphometric parameters from both three-dimensional and bidimensional datasets. Finally, we describe a protocol for the visualization and quantification of mitochondrial structures through electron microscopy. © 2017 Elsevier Inc. All rights reserved.

Termination in cognitive-behavioral therapy with children, adolescents, and parents.

PubMed

Vidair, Hilary B; Feyijinmi, Grace O; Feindler, Eva L

2017-03-01

The process of terminating cognitive-behavioral therapy (CBT) with families has been largely neglected in the literature, with the limited research focused on premature termination. This article describes the natural termination process in CBT with children, adolescents, and their parents. Based on existing theories, we describe a cognitive-behavioral model for: (a) initiating and engaging in discussion of termination, (b) processing the termination of treatment and the therapeutic relationship, (c) key aspects of the termination process in the final session, and (d) the very end of the final session (saying goodbye). For each of the 4 components, we review relevant theories, provide clinical exchanges to demonstrate techniques, and provide related research support. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

RRM3 Fluid Management Device

NASA Technical Reports Server (NTRS)

Barfknecht, P.; Benson, D.; Boyle, R.; DeLee, C.; DiPirro, M.; Francis, J.; Li, X.; McGuire, J.; Mustafi, S.; Tuttle, J.;

The U.S. Army Wounded Warrior Program (AW2): a case study in designing a nonmedical case management program for severely wounded, injured, and ill service members and their families.

PubMed

Hudak, Ronald P; Morrison, Christine; Carstensen, Mary; Rice, James S; Jurgersen, Brent R

2009-06-01

This case study describes the innovative and unique U.S. Army Wounded Warrior Program (AW2), which provides nonmedical case management to the most severely wounded, injured, and ill soldiers and their families. The study describes the program and identifies the features for a successful nonmedical case management program of an identified population who has complex medical needs. Although the article focuses primarily on the role of the AW2 advocate, key components of the program are discussed, including successful initiatives as well as areas that required adjustment. The lessons learned are identified as well as recommendations for future nonmedical case management initiatives.

Defining the Environment in Gene–Environment Research: Lessons From Social Epidemiology

PubMed Central

Daw, Jonathan; Freese, Jeremy

2013-01-01

In this article, we make the case that social epidemiology provides a useful framework to define the environment within gene–environment (G×E) research. We describe the environment in a multilevel, multidomain, longitudinal framework that accounts for upstream processes influencing health outcomes. We then illustrate the utility of this approach by describing how intermediate levels of social organization, such as neighborhoods or schools, are key environmental components of G×E research. We discuss different models of G×E research and encourage public health researchers to consider the value of including genetic information from their study participants. We also encourage researchers interested in G×E interplay to consider the merits of the social epidemiology model when defining the environment. PMID:23927514

Street conflict mediation to prevent youth violence: conflict characteristics and outcomes.

PubMed

Whitehill, Jennifer M; Webster, Daniel W; Vernick, Jon S

2013-06-01

Mediation of potentially violent conflicts is a key component of CeaseFire, an effective gun violence-prevention programme. To describe conflicts mediated by outreach workers (OW) in Baltimore's CeaseFire replication, examine neighbourhood variation, and measure associations between conflict risk factors and successful nonviolent resolution. A cross-sectional study was conducted using records for 158 conflicts mediated between 2007 and 2009. Involvement of youth, gangs, retaliation, weapons and other risk factors were described. Principal component analysis (PCA) was used for data-reduction purposes before the relationship between conflict risk components and mediation success was assessed with multivariate logistic regression. Most conflicts involved 2-3 individuals. Youth, persons with a history of violence, gang members and weapons were commonly present. OWs reported immediate, nonviolent resolution for 65% of mediated conflicts; an additional 23% were at least temporarily resolved without violence. PCA identified four dimensions of conflict risk: the risk-level of individuals involved; whether the incident was related to retaliation; the number of people involved; and shooting likelihood. However, these factors were not related to the OW's ability to resolve the conflict. Neighbourhoods with programme-associated reductions in homicides mediated more gang-related conflicts; neighbourhoods without programme-related homicide reductions encountered more retaliatory conflicts and more weapons.

Community and consumer participation in Australian health services--an overview of organisational commitment and participation processes.

PubMed

Johnson, A; Silburn, K

2000-01-01

This article briefly describes recent initiatives to improve consumer participation in health services that have led to the establishment of the National Resource Centre for Consumer Participation in Health. The results of a component of the needs assessment undertaken by the newly established Centre are presented. They provide a 'snapshot' of the types of feedback and participation processes mainly being utilised by Australian health services at the different levels of seeking information, information sharing and consultation, partnership, delegated power and consumer control. They also allow identification of the organisational commitment made by Australian health services to support a more coordinated approach to community and consumer feedback and participation at different levels of health services such as particular emphasis on determining the presence of community and consumer participation in key organisational statements, specific consumer policies and plans, identifiable leadership, inclusion into job descriptions, allocation of resources, and staff development and consumer training. Discussion centres around four key observations and some of the key perceived external barriers.

A systematic literature review of the key challenges for developing the structure of public health economic models.

PubMed

Squires, Hazel; Chilcott, James; Akehurst, Ronald; Burr, Jennifer; Kelly, Michael P

2016-04-01

To identify the key methodological challenges for public health economic modelling and set an agenda for future research. An iterative literature search identified papers describing methodological challenges for developing the structure of public health economic models. Additional multidisciplinary literature searches helped expand upon important ideas raised within the review. Fifteen articles were identified within the formal literature search, highlighting three key challenges: inclusion of non-healthcare costs and outcomes; inclusion of equity; and modelling complex systems and multi-component interventions. Based upon these and multidisciplinary searches about dynamic complexity, the social determinants of health, and models of human behaviour, six areas for future research were specified. Future research should focus on: the use of systems approaches within health economic modelling; approaches to assist the systematic consideration of the social determinants of health; methods for incorporating models of behaviour and social interactions; consideration of equity; and methodology to help modellers develop valid, credible and transparent public health economic model structures.

Design of a robust thin-film interference filter for erbium-doped fiber amplifier gain equalization

NASA Astrophysics Data System (ADS)

Verly, Pierre G.

2002-06-01

Gain-flattening filters (GFFs) are key wavelength division multiplexing components in fiber-optics telecommunications. Challenging issues in the design of thin-film GFFs were recently the subject of a contest organized at the 2001 Conference on Optical Interference Coatings. The interest and main difficulty of the proposed problem was to minimize the sensitivity of a GFF to simulated fabrication errors. A high-yield solution and its design philosophy are described. The approach used to control the filter robustness is explained and illustrated by numerical results.

Design of a robust thin-film interference filter for erbium-doped fiber amplifier gain equalization.

PubMed

Verly, Pierre G

2002-06-01

Gain-flattening filters (GFFs) are key wavelength division multiplexing components in fiber-optics telecommunications. Challenging issues in the design of thin-film GFFs were recently the subject of a contest organized at the 2001 Conference on Optical Interference Coatings. The interest and main difficulty of the proposed problem was to minimize the sensitivity of a GFF to simulated fabrication errors. A high-yield solution and its design philosophy are described. The approach used to control the filter robustness is explained and illustrated by numerical results.

WCRP surface radiation budget shortwave data product description, version 1.1

NASA Technical Reports Server (NTRS)

Whitlock, C. H.; Charlock, T. P.; Staylor, W. F.; Pinker, R. T.; Laszlo, I.; Dipasquale, R. C.; Ritchey, N. A.

1993-01-01

Shortwave radiative fluxes which reach the Earth's surface are key elements that influence both atmospheric and oceanic circulation. The World Climate Research Program has established the Surface Radiation Budget climatology project with the ultimate goal of determining the various components of the surface radiation budget from satellite data on a global scale. This report describes the first global product that is being produced and archived as part of that effort. The interested user can obtain the monthly global data sets free of charge using e-mail procedures.

Towards Ubiquitous Peer Review Strategies to Sustain and Enhance a Clinical Knowledge Management Framework

PubMed Central

Rocha, Roberto A.; Bradshaw, Richard L.; Bigelow, Sharon M.; Hanna, Timothy P.; Fiol, Guilherme Del; Hulse, Nathan C.; Roemer, Lorrie K.; Wilkinson, Steven G.

2006-01-01

Widespread cooperation between domain experts and front-line clinicians is a key component of any successful clinical knowledge management framework. Peer review is an established form of cooperation that promotes the dissemination of new knowledge. The authors describe three peer collaboration scenarios that have been implemented using the knowledge management infrastructure available at Intermountain Healthcare. Utilization results illustrating the early adoption patterns of the proposed scenarios are presented and discussed, along with succinct descriptions of planned enhancements and future implementation efforts. PMID:17238422

Insights into the role of neuronal glucokinase.

PubMed

De Backer, Ivan; Hussain, Sufyan S; Bloom, Stephen R; Gardiner, James V

2016-07-01

Glucokinase is a key component of the neuronal glucose-sensing mechanism and is expressed in brain regions that control a range of homeostatic processes. In this review, we detail recently identified roles for neuronal glucokinase in glucose homeostasis and counterregulatory responses to hypoglycemia and in regulating appetite. We describe clinical implications from these advances in our knowledge, especially for developing novel treatments for diabetes and obesity. Further research required to extend our knowledge and help our efforts to tackle the diabetes and obesity epidemics is suggested. Copyright © 2016 the American Physiological Society.

Carolina Care at University of North Carolina Health Care: Implementing a Theory-Driven Care Delivery Model Across a Healthcare System.

PubMed

Tonges, Mary; Ray, Joel D; Herman, Suzanne; McCann, Meghan

2018-04-01

Patient satisfaction is a key component of healthcare organizations' performance. Providing a consistent, positive patient experience across a system can be challenging. This article describes an organization's approach to achieving this goal by implementing a successful model developed at the flagship academic healthcare center across an 8-hospital system. The Carolina Care at University of North Carolina Health Care initiative has resulted in substantive qualitative and quantitative benefits including higher patient experience scores for both overall rating and nurse communication.

There’s an App for That: A Guide for Healthcare Practitioners and Researchers on Smartphone Technology

PubMed Central

Trevena, Lyndal

2015-01-01

Smartphone technology is nascent compared to other technologies; however, it has shown an unprecedented uptake amongst lay consumers and professionals. This article presents the history, components, and key features of smartphones, as well as their related concepts and how they work, and it also delineates the process of smartphone applications (apps) development and publishing in the app stores. It also describes and discusses smartphone technology utilisation for health consumers, healthcare professionals, and health researchers, as well as the regulations of health-related apps. PMID:26392848

Developing a Marketing Orientation in Hospital Library Services: A Case Report.

PubMed

Delawska-Elliott, Basia; Grinstead, Carrie; Martin, Heather J

2015-01-01

When the four Providence Health & Services libraries in Oregon regionalized services and resources, the transition, which was originally met with apprehension from some library users, turned out to be a resounding success. Despite a loss of two-thirds of the professional staff and a decreased budget, the new regionalized library experienced an increase in business and recognition. While many factors contributed to the success, a creative marketing and outreach campaign was a key component. This column describes the steps taken to promote regionalized library reference services and online resources.

Role of asymmetric cell division in lifespan control in Saccharomyces cerevisiae

PubMed Central

Higuchi-Sanabria, Ryo; Pernice, Wolfgang M A; Vevea, Jason D; Alessi Wolken, Dana M; Boldogh, Istvan R; Pon, Liza A

2014-01-01

Aging determinants are asymmetrically distributed during cell division in S. cerevisiae, which leads to production of an immaculate, age-free daughter cell. During this process, damaged components are sequestered and retained in the mother cell, and higher functioning organelles and rejuvenating factors are transported to and/or enriched in the bud. Here, we will describe the key quality control mechanisms in budding yeast that contribute to asymmetric cell division of aging determinants including mitochondria, endoplasmic reticulum (ER), vacuoles, extrachromosomal rDNA circles (ERCs), and protein aggregates. PMID:25263578

Exploring safety systems for dispensing in community pharmacies: focusing on how staff relate to organizational components.

PubMed

Harvey, Jasmine; Avery, Anthony J; Ashcroft, Darren; Boyd, Matthew; Phipps, Denham L; Barber, Nicholas

2015-01-01

Identifying risk is an important facet of a safety practice in an organization. To identify risk, all components within a system of operation should be considered. In clinical safety practice, a team of people, technologies, procedures and protocols, management structure and environment have been identified as key components in a system of operation. To explore risks in relation to prescription dispensing in community pharmacies by taking into account relationships between key components that relate to the dispensing process. Fifteen community pharmacies in England with varied characteristics were identified, and data were collected using non-participant observations, shadowing and interviews. Approximately 360 hours of observations and 38 interviews were conducted by the team. Observation field notes from each pharmacy were written into case studies. Overall, 52,500 words from 15 case studies and interview transcripts were analyzed using thematic and line-by-line analyses. Validation techniques included multiple data collectors co-authoring each case study for consensus, review of case studies by members of the wider team including academic and practicing community pharmacists, and patient safety experts and two presentations (internally and externally) to review and discuss findings. Risks identified were related to relationships between people and other key components in dispensing. This included how different levels of staff communicated internally and externally, followed procedures, interacted with technical systems, worked with management, and engaged with the environment. In a dispensing journey, the following categories were identified which show how risks are inextricably linked through relationships between human components and other key components: 1) dispensing with divided attention; 2) dispensing under pressure; 3) dispensing in a restricted space or environment; and, 4) managing external influences. To identify and evaluate risks effectively, an approach that includes understanding relationships between key components in dispensing is required. Since teams of people in community pharmacies are a key dispensing component, and therefore part of the operational process, it is important to note how they relate to other components in the environment within which they operate. Pharmacies can take the opportunity to reflect on the organization of their systems and review in particular how they can improve on the four key categories identified. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Exergy as a useful tool for the performance assessment of aircraft gas turbine engines: A key review

NASA Astrophysics Data System (ADS)

Şöhret, Yasin; Ekici, Selcuk; Altuntaş, Önder; Hepbasli, Arif; Karakoç, T. Hikmet

2016-05-01

It is known that aircraft gas turbine engines operate according to thermodynamic principles. Exergy is considered a very useful tool for assessing machines working on the basis of thermodynamics. In the current study, exergy-based assessment methodologies are initially explained in detail. A literature overview is then presented. According to the literature overview, turbofans may be described as the most investigated type of aircraft gas turbine engines. The combustion chamber is found to be the most irreversible component, and the gas turbine component needs less exergetic improvement compared to all other components of an aircraft gas turbine engine. Finally, the need for analyses of exergy, exergo-economic, exergo-environmental and exergo-sustainability for aircraft gas turbine engines is emphasized. A lack of agreement on exergy analysis paradigms and assumptions is noted by the authors. Exergy analyses of aircraft gas turbine engines, fed with conventional fuel as well as alternative fuel using advanced exergy analysis methodology to understand the interaction among components, are suggested to those interested in thermal engineering, aerospace engineering and environmental sciences.

New Generation Power System for Space Applications

NASA Technical Reports Server (NTRS)

Jones, Loren; Carr, Greg; Deligiannis, Frank; Lam, Barbara; Nelson, Ron; Pantaleon, Jose; Ruiz, Ian; Treicler, John; Wester, Gene; Sauers, Jim;

Evolving Systems: An Outcome of Fondest Hopes and Wildest Dreams

NASA Technical Reports Server (NTRS)

Frost, Susan A.; Balas, Mark J.

2012-01-01

New theory is presented for evolving systems, which are autonomously controlled subsystems that self-assemble into a new evolved system with a higher purpose. Evolving systems of aerospace structures often require additional control when assembling to maintain stability during the entire evolution process. This is the concept of Adaptive Key Component Control that operates through one specific component to maintain stability during the evolution. In addition, this control must often overcome persistent disturbances that occur while the evolution is in progress. Theoretical results will be presented for Adaptive Key Component control for persistent disturbance rejection. An illustrative example will demonstrate the Adaptive Key Component controller on a system composed of rigid body and flexible body modes.

Fusion technologies for Laser Inertial Fusion Energy (LIFE)

NASA Astrophysics Data System (ADS)

Kramer, K. J.; Latkowski, J. F.; Abbott, R. P.; Anklam, T. P.; Dunne, A. M.; El-Dasher, B. S.; Flowers, D. L.; Fluss, M. J.; Lafuente, A.; Loosmore, G. A.; Morris, K. R.; Moses, E.; Reyes, S.

2013-11-01

The Laser Inertial Fusion-based Energy (LIFE) engine design builds upon on going progress at the National Ignition Facility (NIF) and offers a near-term pathway to commercial fusion. Fusion technologies that are critical to success are reflected in the design of the first wall, blanket and tritium separation subsystems. The present work describes the LIFE engine-related components and technologies. LIFE utilizes a thermally robust indirect-drive target and a chamber fill gas. Coolant selection and a large chamber solid-angle coverage provide ample tritium breeding margin and high blanket gain. Target material selection eliminates the need for aggressive chamber clearing, while enabling recycling. Demonstrated tritium separation and storage technologies limit the site tritium inventory to attractive levels. These key technologies, along with the maintenance and advanced materials qualification program have been integrated into the LIFE delivery plan. This describes the development of components and subsystems, through prototyping and integration into a First Of A Kind power plant. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Phys FilmMakers: teaching science students how to make YouTube-style videos

NASA Astrophysics Data System (ADS)

Coates, Rebecca L.; Kuhai, Alvina; Turlej, Laurence Z. J.; Rivlin, Tom; McKemmish, Laura K.

2018-01-01

Phys FilmMakers (PFM) is a new type of course in which a science expert and science communicator partner teach physics students how to make YouTube-style videos on cutting-edge scientific research within the university department. Here, we describe this new course, outline its key components and provide recommendations for others considering implementing a similar FilmMakers-style course using feedback from course tutors and students. We discuss successful and less successful teaching techniques as well as use our experience to identify areas that science students in particular often have difficulties: finding an interesting ‘hook’ for the video, imagining creative B-roll and making a succinct video by removing extraneous (though usually correct and often interesting) material. The course has two major components: workshop sessions in which students learn the key elements of film-making and independent video production where PFM students partner with senior PhD or post-doc researchers to produce a video on their research. This partnership with the department means that the videos produced serve not only as interesting ‘edutainment’ to encourage teenagers and young adults into Science, Technology, Engineering and Maths subjects, but also provide valuable outreach for the academic department.

Improvements to the ShipIR/NTCS adaptive track gate algorithm and 3D flare particle model

NASA Astrophysics Data System (ADS)

Ramaswamy, Srinivasan; Vaitekunas, David A.; Gunter, Willem H.; February, Faith J.

2017-05-01

A key component in any image-based tracking system is the adaptive tracking algorithm used to segment the image into potential targets, rank-and-select the best candidate target, and gate the selected target to further improve tracker performance. Similarly, a key component in any soft-kill response to an incoming guided missile is the flare/chaff decoy used to distract or seduce the seeker homing system away from the naval platform. This paper describes the recent improvements to the naval threat countermeasure simulator (NTCS) of the NATO-standard ship signature model (ShipIR). Efforts to analyse and match the 3D flare particle model against actual IR measurements of the Chemring TALOS IR round resulted in further refinement of the 3D flare particle distribution. The changes in the flare model characteristics were significant enough to require an overhaul to the adaptive track gate (ATG) algorithm in the way it detects the presence of flare decoys and reacquires the target after flare separation. A series of test scenarios are used to demonstrate the impact of the new flare and ATG on IR tactics simulation.

Standards for QUality Improvement Reporting Excellence 2.0: revised publication guidelines from a detailed consensus process.

PubMed

Ogrinc, Greg; Davies, Louise; Goodman, Daisy; Batalden, Paul; Davidoff, Frank; Stevens, David

2016-02-01

Since the publication of Standards for QUality Improvement Reporting Excellence (SQUIRE 1.0) guidelines in 2008, the science of the field has advanced considerably. In this article, we describe the development of SQUIRE 2.0 and its key components. We undertook the revision between 2012 and 2015 using (1) semistructured interviews and focus groups to evaluate SQUIRE 1.0 plus feedback from an international steering group, (2) two face-to-face consensus meetings to develop interim drafts, and (3) pilot testing with authors and a public comment period. SQUIRE 2.0 emphasizes the reporting of three key components of systematic efforts to improve the quality, value, and safety of health care: the use of formal and informal theory in planning, implementing, and evaluating improvement work; the context in which the work is done; and the study of the intervention(s). SQUIRE 2.0 is intended for reporting the range of methods used to improve health care, recognizing that they can be complex and multidimensional. It provides common ground to share these discoveries in the scholarly literature (www.squire-statement.org). Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Differentiation and Exploration of Model MACP for HE VER 1.0 on Prototype Performance Measurement Application for Higher Education

NASA Astrophysics Data System (ADS)

El Akbar, R. Reza; Anshary, Muhammad Adi Khairul; Hariadi, Dennis

2018-02-01

Model MACP for HE ver.1. Is a model that describes how to perform measurement and monitoring performance for Higher Education. Based on a review of the research related to the model, there are several parts of the model component to develop in further research, so this research has four main objectives. The first objective is to differentiate the CSF (critical success factor) components in the previous model, the two key KPI (key performance indicators) exploration in the previous model, the three based on the previous objective, the new and more detailed model design. The final goal is the fourth designed prototype application for performance measurement in higher education, based on a new model created. The method used is explorative research method and application design using prototype method. The results of this study are first, forming a more detailed new model for measurement and monitoring of performance in higher education, differentiation and exploration of the Model MACP for HE Ver.1. The second result compiles a dictionary of college performance measurement by re-evaluating the existing indicators. The third result is the design of prototype application of performance measurement in higher education.

Rubber industry

NASA Astrophysics Data System (ADS)

Staszak, Maciej

2018-03-01

Following chapter presents short introductory description of rubber and rubber industry. The main problem of rubber industry is the way of the usage of spent tires. Furthermore very important group of problems arise considering the metal and nonmetal additives which are significant component of the vulcanized rubber. The key attention is dedicated to typical ways of rubber usage in utilization and recovery of metals from spent rubber materials concentrating specifically on used tires processing. The method of recovery of rare metals from rubber tires was described. The rubber debris finds widest use in the field of waste metal solutions processing. The environmental pollution caused by metals poses serious threat to humans. Several applications of the use of waste rubber debris to remove metals from environmental waters were described. Moreover, the agriculture usage of waste tire rubber debris is described, presenting systems where the rubber material can be useful as a soil replacement.

Evaluating the Quality of Patient Decision-Making Regarding Post-Acute Care.

PubMed

Burke, Robert E; Jones, Jacqueline; Lawrence, Emily; Ladebue, Amy; Ayele, Roman; Leonard, Chelsea; Lippmann, Brandi; Matlock, Daniel D; Allyn, Rebecca; Cumbler, Ethan

2018-05-01

Despite a national focus on post-acute care brought about by recent payment reforms, relatively little is known about how hospitalized older adults and their caregivers decide whether to go to a skilled nursing facility (SNF) after hospitalization. We sought to understand to what extent hospitalized older adults and their caregivers are empowered to make a high-quality decision about utilizing an SNF for post-acute care and what contextual or process elements led to satisfaction with the outcome of their decision once in SNF. Qualitative inquiry using the Ottawa Decision Support Framework (ODSF), a conceptual framework that describes key components of high-quality decision-making. Thirty-two previously community-dwelling older adults (≥ 65 years old) and 22 caregivers interviewed at three different hospitals and three skilled nursing facilities. We used key components of the ODSF to identify elements of context and process that affected decision-making and to what extent the outcome was characteristic of a high-quality decision: informed, values based, and not associated with regret or blame. The most important contextual themes were the presence of active medical conditions in the hospital that made decision-making difficult, prior experiences with hospital readmission or SNF, relative level of caregiver support, and pressure to make a decision quickly for which participants felt unprepared. Patients described playing a passive role in the decision-making process and largely relying on recommendations from the medical team. Patients commonly expressed resignation and a perceived lack of choice or autonomy, leading to dissatisfaction with the outcome. Understanding and intervening to improve the quality of decision-making regarding post-acute care supports is essential for improving outcomes of hospitalized older adults. Our results suggest that simply providing information is not sufficient; rather, incorporating key contextual factors and improving the decision-making process for both patients and clinicians are also essential.

Could Notch signaling pathway be a potential therapeutic option in renal diseases?

PubMed

Marquez-Exposito, Laura; Cantero-Navarro, Elena; Lavoz, Carolina; Fierro-Fernández, Marta; Poveda, Jonay; Rayego-Mateos, Sandra; Rodrigues-Diez, Raúl R; Morgado-Pascual, José Luis; Orejudo, Macarena; Mezzano, Sergio; Ruiz-Ortega, Marta

2018-02-10

Notch pathway regulates key processes in the kidney, involved in embryonic development and tissue damage. In many human chronic renal diseases a local activation of Notch pathway has been described, suggesting that several components of Notch pathway could be considered as biomarkers of renal damage. Experimental studies by genetic modulation of Notch components or pharmacological approaches by γ-secretase inhibitors have demonstrated the role of this pathway in renal regeneration renal, podocyte apoptosis, proliferation and fibroblasts activation, and induction of epithelial to mesenchymal transition of tubular epithelial cells. Recent studies suggest an interaction between Notch and NF-κB pathway involved in the regulation of renal inflammatory process. On the other hand, there are some miRNAs that could regulate Notch components and down-stream responses. All these data suggest that Notch blockade could be a novel therapeutic option for renal diseases. Copyright © 2018 Sociedad Española de Nefrología. Published by Elsevier España, S.L.U. All rights reserved.

Approaching psoriasis differently: patient-physician relationships, patient education and choosing the right topical vehicle.

PubMed

Feldman, Steven R

2010-08-01

Psoriasis is a common, frustrating problem for dermatologists and patients. Long-held notions about the need to use thick, greasy corticosteroid ointments for psoriasis contributed to frustration for many patients. Fortunately, the general approach to managing psoriasis is changing. The purpose of this article is to describe key components of psoriasis management with a focus on the changing paradigm for treating the disease. In addition to making the right diagnosis and prescribing the right treatment, key elements of psoriasis management include establishing a strong physician-patient relationship, educating patients about the disease and recognizing the importance of adherence to topical treatment. In light of the tendency toward poor adherence, use of a fast-acting agent in a vehicle that patients are willing to use is critically important for successful disease management.

Biallelic mutations in SNX14 cause a syndromic form of cerebellar atrophy and lysosome-autophagosome dysfunction

PubMed Central

Akizu, Naiara; Cantagrel, Vincent; Zaki, Maha S.; Al-Gazali, Lihadh; Wang, Xin; Rosti, Rasim Ozgur; Dikoglu, Esra; Gelot, Antoinette Bernabe; Rosti, Basak; Vaux, Keith K.; Scott, Eric M.; Silhavy, Jennifer L.; Schroth, Jana; Copeland, Brett; Schaffer, Ashleigh E.; Gordts, Philip; Esko, Jeffrey D.; Buschman, Matthew D.; Fields, Seth J.; Napolitano, Gennaro; Ozgul, R. Koksal; Sagiroglu, Mahmut Samil; Azam, Matloob; Ismail, Samira; Aglan, Mona; Selim, Laila; Gamal, Iman; Hadi, Sawsan Abdel; El Badawy, Amera; Sadek, Abdelrahim A.; Mojahedi, Faezeh; Kayserili, Hulya; Masri, Amira; Bastaki, Laila; Temtamy, Samia; Müller, Ulrich; Desguerre, Isabelle; Casanova, Jean-Laurent; Dursun, Ali; Gunel, Murat; Gabriel, Stacey B.; de Lonlay, Pascale; Gleeson, Joseph G.

2015-01-01

Pediatric-onset ataxias often present clinically with developmental delay and intellectual disability, with prominent cerebellar atrophy as a key neuroradiographic finding. Here we describe a novel clinically distinguishable recessive syndrome in 12 families with cerebellar atrophy together with ataxia, coarsened facial features and intellectual disability, due to truncating mutations in sorting nexin 14 (SNX14), encoding a ubiquitously expressed modular PX-domain-containing sorting factor. We found SNX14 localized to lysosomes, and associated with phosphatidyl-inositol (3,5)P2, a key component of late endosomes/lysosomes. Patient cells showed engorged lysosomes and slower autophagosome clearance rate upon starvation induction. Zebrafish morphants showed dramatic loss of cerebellar parenchyma, accumulated autophagosomes, and activation of apoptosis. Our results suggest a unique ataxia syndrome due to biallelic SNX14 mutations, leading to lysosome-autophagosome dysfunction. PMID:25848753

Model development to study strategies of younger and older adults getting up from the floor.

PubMed

Schwickert, L; Oberle, C; Becker, C; Lindemann, U; Klenk, J; Schwenk, M; Bourke, A; Zijlstra, W

2016-04-01

Long lies after a fall remain a public health challenge. Many successful fall prevention programmes have been developed but only few of them include recovery strategies after a fall. Once better understood, such movement strategies could be implemented into training interventions. A model of motion sequences describing successful movement strategies for rising from the floor in different age groups was developed. Possible risk factors for poor rising performance such as flexibility and muscle power were evaluated. Fourteen younger subjects between 20 and 50 years of age and 10 healthy older subjects (60+ years) were included. Movement strategies and key components of different rising sequences were determined from video analyses. The temporal parameters of transfers and number of components within the motion sequences were calculated. Possible explanatory variables for differences in rising performance were assessed (leg extension power, flexibility of the knee- and hip joints). Seven different components were identified for the lie-to-stand-walk transfer, labelled as lying, initiation, positioning, supporting, elevation, or stabilisation component followed by standing and/or walking. Median time to rise was significantly longer in older subjects (older 5.7s vs. younger 3.7s; p < 0.001), and leg extension power (left p = 0.002, right p = 0.013) and knee flexibility (left p = 0.019, right p = 0.025) were significantly lower. The number of components for rising was correlated with hip flexibility (r = 0.514) and maximal power (r = 0.582). The time to rise was correlated with minimal goniometric knee angle of the less flexible leg (r = 0.527) and maximal leg extension power (r = 0.725). A motion sequence model containing seven different components identified by individual key-frames could be established. Age-related differences in rising strategies and performance were identified.

Inequalities in the spiritual health of young Canadians: a national, cross-sectional study.

PubMed

Michaelson, Valerie; Freeman, John; King, Nathan; Ascough, Hannah; Davison, Colleen; Trothen, Tracy; Phillips, Sian; Pickett, William

2016-11-28

Spiritual health, along with physical, emotional, and social aspects, is one of four domains of health. Assessment in this field of research is challenging methodologically. No contemporary population-based studies have profiled the spiritual health of adolescent Canadians with a focus on health inequalities. In a 2014 nationally representative sample of Canadians aged 11-15 years we therefore: (1) psychometrically evaluated a series of items used to assess the perceived importance of spiritual health and its four potential sub-domains (connections with: self, others, nature and the natural environment, and the transcendent) to adolescents; (2) described potential inequalities in spiritual health within adolescent populations, overall and by spiritual health sub-domain, by key socio-demographic factors. Cross-sectional analysis of survey reports from the 2014 (Cycle 7) of the Canadian Health Behaviour in School-aged Children study (weighted n = 25,036). Principal components analysis followed by confirmatory factor analysis were used to explore the psychometric properties of the spiritual health items and the associated composite scale describing perceived importance of spiritual health. Associations among this composite scale, its individual sub-domains, and key socio-demographic factors were then explored. The principal components analysis best supported a four-factor structure where the eight scale items loaded highly according to the original four domains. This was also supported in confirmatory factor analyses. We then combined the eight items into composite spiritual health score as supported by theory, principal components analysis findings, and acceptable tests of reliability. Further confirmatory factor analysis suggested the need for additional refinements to this scale. Based upon exploratory cross-sectional analyses, strong socio-demographic inequalities were observed in the spiritual health measures by age, gender, relative material wealth, immigration status, and province/territory. Study findings highlight potential inequalities in the spiritual health of young Canadians, as well as opportunities for methodological advances in the assessment of adolescent spiritual health in our population.

Stakeholder engagement: a key component of integrating genomic information into electronic health records

PubMed Central

Hartzler, Andrea; McCarty, Catherine A.; Rasmussen, Luke V.; Williams, Marc S.; Brilliant, Murray; Bowton, Erica A.; Clayton, Ellen Wright; Faucett, William A.; Ferryman, Kadija; Field, Julie R.; Fullerton, Stephanie M.; Horowitz, Carol R.; Koenig, Barbara A.; McCormick, Jennifer B.; Ralston, James D.; Sanderson, Saskia C.; Smith, Maureen E.; Trinidad, Susan Brown

2014-01-01

Integrating genomic information into clinical care and the electronic health record can facilitate personalized medicine through genetically guided clinical decision support. Stakeholder involvement is critical to the success of these implementation efforts. Prior work on implementation of clinical information systems provides broad guidance to inform effective engagement strategies. We add to this evidence-based recommendations that are specific to issues at the intersection of genomics and the electronic health record. We describe stakeholder engagement strategies employed by the Electronic Medical Records and Genomics Network, a national consortium of US research institutions funded by the National Human Genome Research Institute to develop, disseminate, and apply approaches that combine genomic and electronic health record data. Through select examples drawn from sites of the Electronic Medical Records and Genomics Network, we illustrate a continuum of engagement strategies to inform genomic integration into commercial and homegrown electronic health records across a range of health-care settings. We frame engagement as activities to consult, involve, and partner with key stakeholder groups throughout specific phases of health information technology implementation. Our aim is to provide insights into engagement strategies to guide genomic integration based on our unique network experiences and lessons learned within the broader context of implementation research in biomedical informatics. On the basis of our collective experience, we describe key stakeholder practices, challenges, and considerations for successful genomic integration to support personalized medicine. PMID:24030437

A network analysis of the Chinese medicine Lianhua-Qingwen formula to identify its main effective components.

PubMed

Wang, Chun-Hua; Zhong, Yi; Zhang, Yan; Liu, Jin-Ping; Wang, Yue-Fei; Jia, Wei-Na; Wang, Guo-Cai; Li, Zheng; Zhu, Yan; Gao, Xiu-Mei

2016-02-01

Chinese medicine is known to treat complex diseases with multiple components and multiple targets. However, the main effective components and their related key targets and functions remain to be identified. Herein, a network analysis method was developed to identify the main effective components and key targets of a Chinese medicine, Lianhua-Qingwen Formula (LQF). The LQF is commonly used for the prevention and treatment of viral influenza in China. It is composed of 11 herbs, gypsum and menthol with 61 compounds being identified in our previous work. In this paper, these 61 candidate compounds were used to find their related targets and construct the predicted-target (PT) network. An influenza-related protein-protein interaction (PPI) network was constructed and integrated with the PT network. Then the compound-effective target (CET) network and compound-ineffective target network (CIT) were extracted, respectively. A novel approach was developed to identify effective components by comparing CET and CIT networks. As a result, 15 main effective components were identified along with 61 corresponding targets. 7 of these main effective components were further experimentally validated to have antivirus efficacy in vitro. The main effective component-target (MECT) network was further constructed with main effective components and their key targets. Gene Ontology (GO) analysis of the MECT network predicted key functions such as NO production being modulated by the LQF. Interestingly, five effective components were experimentally tested and exhibited inhibitory effects on NO production in the LPS induced RAW 264.7 cell. In summary, we have developed a novel approach to identify the main effective components in a Chinese medicine LQF and experimentally validated some of the predictions.

Regulation of the Expression of Bacterial Multidrug Exporters by Two-Component Signal Transduction Systems.

PubMed

Nishino, Kunihiko

2018-01-01

Bacterial multidrug exporters confer resistance to a wide range of antibiotics, dyes, and biocides. Recent studies have shown that there are many multidrug exporters encoded in bacterial genome. For example, it was experimentally identified that E. coli has at least 20 multidrug exporters. Because many of these multidrug exporters have overlapping substrate spectra, it is intriguing that bacteria, with their economically organized genomes, harbor such large sets of multidrug exporter genes. The key to understanding how bacteria utilize these multiple exporters lies in the regulation of exporter expression. Bacteria have developed signaling systems for eliciting a variety of adaptive responses to their environments. These adaptive responses are often mediated by two-component regulatory systems. In this chapter, the method to identify response regulators that affect expression of multidrug exporters is described.

The motivation, skills, and decision-making model of "drug abuse" prevention.

PubMed

Sussman, Steve; Earleywine, Mitchell; Wills, Thomas; Cody, Christine; Biglan, Tony; Dent, Clyde W; Newcomb, Michael D

2004-01-01

This article summarizes the theoretical basis for targeted prevention programs as they apply to different high-risk groups. We explain the advantages and disadvantages of different definitions of risk and discuss strategies for preventing drug use related problems in high-risk youth. Productive prevention programs for many at-risk groups share similar components, including those that address motivation, skills, and decision making. We present key aspects of these three components and link them to theories in clinical psychology, social psychology, sociology, and chemical dependence treatment. Among a total of 29 promising targeted prevention programs, we describe examples of empirically evaluated, intensive interventions that have made a positive impact on the attitudes and behavior of multiple problem youth. Incorporating the perspectives of multiple disciplines appears essential for progress in drug abuse and other problem behavior prevention.

Designing and encoding models for synthetic biology.

PubMed

Endler, Lukas; Rodriguez, Nicolas; Juty, Nick; Chelliah, Vijayalakshmi; Laibe, Camille; Li, Chen; Le Novère, Nicolas

2009-08-06

A key component of any synthetic biology effort is the use of quantitative models. These models and their corresponding simulations allow optimization of a system design, as well as guiding their subsequent analysis. Once a domain mostly reserved for experts, dynamical modelling of gene regulatory and reaction networks has been an area of growth over the last decade. There has been a concomitant increase in the number of software tools and standards, thereby facilitating model exchange and reuse. We give here an overview of the model creation and analysis processes as well as some software tools in common use. Using markup language to encode the model and associated annotation, we describe the mining of components, their integration in relational models, formularization and parametrization. Evaluation of simulation results and validation of the model close the systems biology 'loop'.

Laying the Groundwork for Enterprise-Wide Medical Language Processing Services: Architecture and Process

PubMed Central

Chen, Elizabeth S.; Maloney, Francine L.; Shilmayster, Eugene; Goldberg, Howard S.

2009-01-01

A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs. PMID:20351830

Laying the groundwork for enterprise-wide medical language processing services: architecture and process.

PubMed

Chen, Elizabeth S; Maloney, Francine L; Shilmayster, Eugene; Goldberg, Howard S

2009-11-14

A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs.

156 Mbps Ultrahigh-Speed Wireless LAN Prototype in the 38 GHz Band

NASA Astrophysics Data System (ADS)

Wu, Gang; Inoue, Masugi; Murakami, Homare; Hase, Yoshihiro

2001-12-01

This paper describes a 156 Mbps ultrahigh-speed wireless LAN operating in the 38 GHz millimeter (mm)-wave band. The system is a third prototype developed at the Communications Research Laboratory since 1998. Compared with the previous prototypes, the system is faster (156 Mbps) and smaller (volume of radio transceiver less than 1000 cc), it has a larger service area (two overlapping basic service sets), and a longer transmission distance (the protocol can support a distance of more than two hundred meters). The development is focused on the physical layer and the data link control layer, and thus a GMSK-based mm-wave transceiver and an enhanced RS-ISMA (reservation-based slotted idle signal multiple access) protocol are key development components. This paper describes the prototype system's design, configuration, and implementation.

Small grant management in health and behavioral sciences: Lessons learned.

PubMed

Sakraida, Teresa J; D'Amico, Jessica; Thibault, Erica

2010-08-01

This article describes considerations in health and behavioral sciences small grant management and describes lessons learned during post-award implementation. Using the components by W. Sahlman [Sahlman, W. (1997). How to write a great business plan. Harvard Business Review, 75(4), 98-108] as a business framework, a plan was developed that included (a) building relationships with people in the research program and with external parties providing key resources, (b) establishing a perspective of opportunity for research advancement, (c) identifying the larger context of scientific culture and regulatory environment, and (d) anticipating problems with a flexible response and rewarding teamwork. Small grant management included developing a day-to-day system, building a grant/study program development plan, and initiating a marketing plan. Copyright 2010 Elsevier Inc. All rights reserved.

Systems thinking for assistive technology: a commentary on the GREAT summit.

PubMed

MacLachlan, Malcolm; Scherer, Marcia J

2018-07-01

The area of assistive technology has a long history of technological ingenuity and innovation. In order to ensure that the benefits of assistive technology are equitably distributed across the population and life course, it is necessary to adopt a systemic approach to the area. We describe examples of systems thinking and non-systems thinking across 10 Ps. These Ps are People (or users, as the primary beneficiaries of assistive technology), Policy, Products, Personnel, Provision (as key strategic drivers at systems level); and Procurement, Place, Pace, Promotion and Partnership (as key situational factors for systems). Together these Ps should constitute a framework for an "open" system that can evolve and adapt, that empowers users, inter-connects key components and locates these in the reality of differing contexts. The adoption of a stronger systems thinking perspective within the assistive technology field should allow for more equitable, more resilient and more sustainable assistive technology across high, middle- and low-income contexts and countries. Implications for Rehabilitation The progress of assistive technology provison has been hampered by disconnected initiatives and activities and this needs to be corrected. Systems thinking is a way of thinking about the connections between things and how these are influenced by contextual and other factors. By encouraging the providers and users of assitive technology to think more systemically we can provide a more cohesive and resilient systems. The user experience is the central component of systems thinking in assistive technologies.

Identification and Characterization of Key Human Performance Issues and Research in the Next Generation Air Transportation System (NextGen)

NASA Technical Reports Server (NTRS)

Lee, Paul U.; Sheridan, Tom; Poage, james L.; Martin, Lynne Hazel; Jobe, Kimberly K.

2010-01-01

This report identifies key human-performance-related issues associated with Next Generation Air Transportation System (NextGen) research in the NASA NextGen-Airspace Project. Four Research Focus Areas (RFAs) in the NextGen-Airspace Project - namely Separation Assurance (SA), Airspace Super Density Operations (ASDO), Traffic Flow Management (TFM), and Dynamic Airspace Configuration (DAC) - were examined closely. In the course of the research, it was determined that the identified human performance issues needed to be analyzed in the context of NextGen operations rather than through basic human factors research. The main gaps in human factors research in NextGen were found in the need for accurate identification of key human-systems related issues within the context of specific NextGen concepts and better design of the operational requirements for those concepts. By focusing on human-system related issues for individual concepts, key human performance issues for the four RFAs were identified and described in this report. In addition, mixed equipage airspace with components of two RFAs were characterized to illustrate potential human performance issues that arise from the integration of multiple concepts.

Evaluation of a Mathematical Model of Rat Body Weight Regulation in Application to Caloric Restriction and Drug Treatment Studies.

PubMed

Selimkhanov, Jangir; Thompson, W Clayton; Patterson, Terrell A; Hadcock, John R; Scott, Dennis O; Maurer, Tristan S; Musante, Cynthia J

2016-01-01

The purpose of this work is to develop a mathematical model of energy balance and body weight regulation that can predict species-specific response to common pre-clinical interventions. To this end, we evaluate the ability of a previously published mathematical model of mouse metabolism to describe changes in body weight and body composition in rats in response to two short-term interventions. First, we adapt the model to describe body weight and composition changes in Sprague-Dawley rats by fitting to data previously collected from a 26-day caloric restriction study. The calibrated model is subsequently used to describe changes in rat body weight and composition in a 23-day cannabinoid receptor 1 antagonist (CB1Ra) study. While the model describes body weight data well, it fails to replicate body composition changes with CB1Ra treatment. Evaluation of a key model assumption about deposition of fat and fat-free masses shows a limitation of the model in short-term studies due to the constraint placed on the relative change in body composition components. We demonstrate that the model can be modified to overcome this limitation, and propose additional measurements to further test the proposed model predictions. These findings illustrate how mathematical models can be used to support drug discovery and development by identifying key knowledge gaps and aiding in the design of additional experiments to further our understanding of disease-relevant and species-specific physiology.

Evaluation of a Mathematical Model of Rat Body Weight Regulation in Application to Caloric Restriction and Drug Treatment Studies

PubMed Central

Selimkhanov, Jangir; Patterson, Terrell A.; Scott, Dennis O.; Maurer, Tristan S.; Musante, Cynthia J.

2016-01-01

The purpose of this work is to develop a mathematical model of energy balance and body weight regulation that can predict species-specific response to common pre-clinical interventions. To this end, we evaluate the ability of a previously published mathematical model of mouse metabolism to describe changes in body weight and body composition in rats in response to two short-term interventions. First, we adapt the model to describe body weight and composition changes in Sprague-Dawley rats by fitting to data previously collected from a 26-day caloric restriction study. The calibrated model is subsequently used to describe changes in rat body weight and composition in a 23-day cannabinoid receptor 1 antagonist (CB1Ra) study. While the model describes body weight data well, it fails to replicate body composition changes with CB1Ra treatment. Evaluation of a key model assumption about deposition of fat and fat-free masses shows a limitation of the model in short-term studies due to the constraint placed on the relative change in body composition components. We demonstrate that the model can be modified to overcome this limitation, and propose additional measurements to further test the proposed model predictions. These findings illustrate how mathematical models can be used to support drug discovery and development by identifying key knowledge gaps and aiding in the design of additional experiments to further our understanding of disease-relevant and species-specific physiology. PMID:27227543

WRKY Transcription Factors: Key Components in Abscisic Acid Signaling

DTIC Science & Technology

2011-01-01

Review article WRKY transcription factors : key components in abscisic acid signalling Deena L. Rushton1, Prateek Tripathi1, Roel C. Rabara1, Jun Lin1...May 2011. *Correspondence (Tel +605 688 5749; fax +605 688 5624; email paul.rushton@sdstate.edu) Keywords: abscisic acid, WRKY transcription factor ...seed germination, drought, abiotic stress. Summary WRKY transcription factors (TFs) are key regulators of many plant processes, including the responses

Key characteristics of specular stereo

PubMed Central

Muryy, Alexander A.; Fleming, Roland W.; Welchman, Andrew E.

2014-01-01

Because specular reflection is view-dependent, shiny surfaces behave radically differently from matte, textured surfaces when viewed with two eyes. As a result, specular reflections pose substantial problems for binocular stereopsis. Here we use a combination of computer graphics and geometrical analysis to characterize the key respects in which specular stereo differs from standard stereo, to identify how and why the human visual system fails to reconstruct depths correctly from specular reflections. We describe rendering of stereoscopic images of specular surfaces in which the disparity information can be varied parametrically and independently of monocular appearance. Using the generated surfaces and images, we explain how stereo correspondence can be established with known and unknown surface geometry. We show that even with known geometry, stereo matching for specular surfaces is nontrivial because points in one eye may have zero, one, or multiple matches in the other eye. Matching features typically yield skew (nonintersecting) rays, leading to substantial ortho-epipolar components to the disparities, which makes deriving depth values from matches nontrivial. We suggest that the human visual system may base its depth estimates solely on the epipolar components of disparities while treating the ortho-epipolar components as a measure of the underlying reliability of the disparity signals. Reconstructing virtual surfaces according to these principles reveals that they are piece-wise smooth with very large discontinuities close to inflection points on the physical surface. Together, these distinctive characteristics lead to cues that the visual system could use to diagnose specular reflections from binocular information. PMID:25540263

Does the context of reinforcement affect resistance to change?

PubMed

Nevin, J A; Grace, R C

1999-04-01

Eight pigeons were trained on multiple schedules of reinforcement where pairs of components alternated in blocks on different keys to define 2 local contexts. On 1 key, components arranged 160 and 40 reinforcers/hr; on the other, components arranged 40 and 10 reinforcers/hr. Response rates in the 40/hr component were higher in the latter pair. Within pairs, resistance to prefeeding and resistance to extinction were generally greater in the richer component. The two 40/hr components did not differ in resistance to prefeeding, but the 40/hr component that alternated with 10/hr was more resistant to extinction. This discrepancy was interpreted by an algebraic model relating response strength to component reinforcer rate, including generalization decrement. According to this model, strength is independent of context, consistent with research on schedule preference.

Self-Consistency of the Theory of Elementary Stage Rates of Reversible Processes and the Equilibrium Distribution of Reaction Mixture Components

NASA Astrophysics Data System (ADS)

Tovbin, Yu. K.

2018-06-01

An analysis is presented of one of the key concepts of physical chemistry of condensed phases: the theory self-consistency in describing the rates of elementary stages of reversible processes and the equilibrium distribution of components in a reaction mixture. It posits that by equating the rates of forward and backward reactions, we must obtain the same equation for the equilibrium distribution of reaction mixture components, which follows directly from deducing the equation in equilibrium theory. Ideal reaction systems always have this property, since the theory is of a one-particle character. Problems arise in considering interparticle interactions responsible for the nonideal behavior of real systems. The Eyring and Temkin approaches to describing nonideal reaction systems are compared. Conditions for the self-consistency of the theory for mono- and bimolecular processes in different types of interparticle potentials, the degree of deviation from the equilibrium state, allowing for the internal motions of molecules in condensed phases, and the electronic polarization of the reagent environment are considered within the lattice gas model. The inapplicability of the concept of an activated complex coefficient for reaching self-consistency is demonstrated. It is also shown that one-particle approximations for considering intermolecular interactions do not provide a theory of self-consistency for condensed phases. We must at a minimum consider short-range order correlations.

Mental Imagery and Post-Traumatic Stress Disorder: A Neuroimaging and Experimental Psychopathology Approach to Intrusive Memories of Trauma

PubMed Central

Clark, Ian A.; Mackay, Clare E.

2015-01-01

This hypothesis and theory paper presents a pragmatic framework to help bridge the clinical presentation and neuroscience of intrusive memories following psychological trauma. Intrusive memories are a hallmark symptom of post-traumatic stress disorder (PTSD). However, key questions, including those involving etiology, remain. In particular, we know little about the brain mechanisms involved in why only some moments of the trauma return as intrusive memories while others do not. We first present an overview of the patient experience of intrusive memories and the neuroimaging studies that have investigated intrusive memories in PTSD patients. Next, one mechanism of how to model intrusive memories in the laboratory, the trauma film paradigm, is examined. In particular, we focus on studies combining the trauma film paradigm with neuroimaging. Stemming from the clinical presentation and our current understanding of the processes involved in intrusive memories, we propose a framework in which an intrusive memory comprises five component parts; autobiographical (trauma) memory, involuntary recall, negative emotions, attention hijacking, and mental imagery. Each component part is considered in turn, both behaviorally and from a brain imaging perspective. A mapping of these five components onto our understanding of the brain is described. Unanswered questions that exist in our understanding of intrusive memories are considered using the proposed framework. Overall, we suggest that mental imagery is key to bridging the experience, memory, and intrusive recollection of the traumatic event. Further, we suggest that by considering the brain mechanisms involved in the component parts of an intrusive memory, in particular mental imagery, we may be able to aid the development of a firmer bridge between patients’ experiences of intrusive memories and the clinical neuroscience behind them. PMID:26257660

Coupling the Community Atmospheric Model (CAM) with the Statistical Spectral Interpolation (SSI) System under ESMF

NASA Technical Reports Server (NTRS)

daSilva, Arlindo

2004-01-01

The first set of interoperability experiments illustrates the role ESMF can play in integrating the national Earth science resources. Using existing data assimilation technology from NCEP and the National Weather Service, the Community Atmosphere Model (CAM) was able to ingest conventional and remotely sensed observations, a capability that could open the door to using CAM for weather as well as climate prediction. CAM, which includes land surface capabilities, was developed by NCAR, with key components from GSFC. In this talk we will describe the steps necessary for achieving the coupling of these two systems.

Laminates and reinforced metals

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1980-01-01

A selective review is presented of the state of the art of metallic laminates and fiber reinforced metals called metallic matrix laminates (MMLs). Design and analysis procedures that are used for, and typical structural components that have been made from MMLs are emphasized. Selected MMLs, constituent materials, typical material properties and fabrication procedures are briefly described, including hybrids and superhybrids. Advantages, disadvantages, and special considerations required during design, analysis, and fabrication of MMLs are examined. Tabular and graphical data are included to illustrate key aspects of MMLs. Appropriate references are cited to provide a selective bibliography of a rapidly expanding and very promising research and development field.

UV-B photoreceptor-mediated signalling in plants.

PubMed

Heijde, Marc; Ulm, Roman

2012-04-01

Ultraviolet-B radiation (UV-B) is a key environmental signal that is specifically perceived by plants to promote UV acclimation and survival in sunlight. Whereas the plant photoreceptors for visible light are rather well characterised, the UV-B photoreceptor UVR8 was only recently described at the molecular level. Here, we review the current understanding of the UVR8 photoreceptor-mediated pathway in the context of UV-B perception mechanism, early signalling components and physiological responses. We further outline the commonalities in UV-B and visible light signalling as well as highlight differences between these pathways. Copyright © 2012 Elsevier Ltd. All rights reserved.

High speed holographic digital recorder.

PubMed

Roberts, H N; Watkins, J W; Johnson, R H

1974-04-01

Concepts, feasibility experiments, and key component developments are described for a holographic digital record/reproduce system with the potential for 1.0 Gbit/sec rates and higher. Record rates of 500 Mbits/sec have been demonstrated with a ten-channel acoustooptic modulator array and a mode-locked, cavity-dumped argon-ion laser. Acoustooptic device technology has been advanced notably during the development of mode lockers, cavity dumpers, beam deflectors, and multichannel modulator arrays. The development of high speed multichannel photodetector arrays for the readout subsystem requires special attention. The feasibility of 1.0 Gbits/sec record rates has been demonstrated.

Bioorthogonal Chemistry: Fishing for Selectivity in a Sea of Functionality

PubMed Central

Sletten, Ellen M.

2010-01-01

The study of biomolecules in their native environments is a challenging task because of the vast complexity of cellular systems. Technologies developed in the last few years for the selective modification of biological species in living systems have yielded new insights into cellular processes. Key to these new techniques are bioorthogonal chemical reactions, whose components must react rapidly and selectively with each other under physiological conditions in the presence of the plethora of functionality necessary to sustain life. Herein we describe the bioorthogonal chemical reactions developed to date and how they can be used to study biomolecules. PMID:19714693

Discovery of a highly potent series of TLR7 agonists.

PubMed

Jones, Peter; Pryde, David C; Tran, Thien-Duc; Adam, Fiona M; Bish, Gerwyn; Calo, Frederick; Ciaramella, Guiseppe; Dixon, Rachel; Duckworth, Jonathan; Fox, David N A; Hay, Duncan A; Hitchin, James; Horscroft, Nigel; Howard, Martin; Laxton, Carl; Parkinson, Tanya; Parsons, Gemma; Proctor, Katie; Smith, Mya C; Smith, Nicholas; Thomas, Amy

2011-10-01

The discovery of a series of highly potent and novel TLR7 agonist interferon inducers is described. Structure-activity relationships are presented, along with pharmacokinetic studies of a lead molecule from this series of N9-pyridylmethyl-8-oxo-3-deazapurine analogues. A rationale for the very high potency observed is offered. An investigation of the clearance mechanism of this class of compounds in rat was carried out, resulting in aldehyde oxidase mediated oxidation being identified as a key component of the high clearance observed. A possible solution to this problem is discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Bioorthogonal chemistry: fishing for selectivity in a sea of functionality.

PubMed

Sletten, Ellen M; Bertozzi, Carolyn R

2009-01-01

The study of biomolecules in their native environments is a challenging task because of the vast complexity of cellular systems. Technologies developed in the last few years for the selective modification of biological species in living systems have yielded new insights into cellular processes. Key to these new techniques are bioorthogonal chemical reactions, whose components must react rapidly and selectively with each other under physiological conditions in the presence of the plethora of functionality necessary to sustain life. Herein we describe the bioorthogonal chemical reactions developed to date and how they can be used to study biomolecules.

Space-Based Telemetry and Range Safety (STARS) Study

NASA Technical Reports Server (NTRS)

Hogie, Keith; Crisuolo, Ed; Parise, Ron

2004-01-01

This presentation will describe the design, development, and testing of a system to collect telemetry, format it into UDP/IP packets, and deliver it to a ground test range using standard IP technologies over a TDRSS link. This presentation will discuss the goal of the STARS IP Formatter along with the overall design. It will also present performance results of the current version of the IP formatter. Finally, it will discuss key issues for supporting constant rate telemetry data delivery when using standard components such as PCI/104 processors, the Linux operating system, Internet Protocols, and synchronous serial interfaces.

Development costs for a nuclear electric propulsion stage.

NASA Technical Reports Server (NTRS)

Mondt, J. F.; Prickett, W. Z.

1973-01-01

Development costs are presented for an unmanned nuclear electric propulsion (NEP) stage based upon a liquid metal cooled, in-core thermionic reactor. A total of 120 kWe are delivered to the thrust subsystem which employs mercury ion engines for electric propulsion. This study represents the most recent cost evaluation of the development of a reactor power system for a wide range of nuclear space power applications. These include geocentric, and outer planet and other deep space missions. The development program is described for the total NEP stage, based upon specific development programs for key NEP stage components and subsystems.

Multifunctional 2D- Materials: Selenides and Halides

NASA Technical Reports Server (NTRS)

Singh, N. B.; Su, Ching Hua; Arnold, Brad; Choa, Fow-Sen; Bohorfous, Sara

2016-01-01

Material is the key component and controls the performance of the detectors, devices and sensors. The materials design, processing, growth and fabrication of bulk and nanocrystals and fabrication into devices and sensors involve multidisciplinary team of experts. This places a large burden on the cost of the novel materials development. Due to this reason there is a big thrust for the prediction of multifunctionality of materials before design and development. Up to some extent design can achieve certain properties. In multinary materials processing is also a big factor. In this presentation, examples of two classes of industrially important materials will be described.

Interventions Used by Nurse Preceptors to Develop Critical Thinking of New Graduate Nurses: A Systematic Review.

PubMed

Schuelke, Sue; Barnason, Susan

Healthcare complexity and patient acuity necessitate competent nurses with critical thinking abilities. However, these skill sets are less developed among newly hired graduate nurses. The overall purpose of this systematic review was to examine interventions/strategies implemented by preceptors in healthcare organizations to promote critical thinking of new graduate nurses. A systematic search of the literature resulted in 602 citations, with nine studies meeting the inclusion criteria. Educational interventions were varied and will be described in this article. Preceptor education was a key component in the studies reviewed.

Development assessment of wash water reclamation

NASA Technical Reports Server (NTRS)

Putnam, D. F.

1976-01-01

An analytical study assessment of state-of-the-art wash water reclamation technology is presented. It covers all non-phase-change unit operations, unit processes and subsystems currently under development by NASA. Each approach to wash water reclamation is described in detail. Performance data are given together with the projected weights and sizes of key components and subsystems. It is concluded that a simple multifiltration subsystem composed of surface-type cartridge filters, carbon adsorption and ion exchange resins is the most attractive approach for spacecraft wash water reclamation in earth orbital missions of up to 10 years in duration.

Improving performance through an organizational culture of employee expertise.

PubMed

Jacobs, R L

1996-01-01

Managers can do many things to improve organizational performance, but the accomplishments of the most skillful employees often are most important. This article makes the point that managers should be aware of employee expertise and its relationship to organizational performance. The article also describes the components of an organizational culture of employee expertise. An organizational culture of employee expertise builds on the learning organization metaphor that has frequently appeared in the management literature. How employees develop expertise to do their jobs is emerging as a critical issue for organizations, and managers will likely play a key role in that process.

NASA's NPOESS Preparatory Project Science Data Segment: A Framework for Measurement-based Earth Science Data Systems

NASA Technical Reports Server (NTRS)

Schwaller, Mathew R.; Schweiss, Robert J.

2007-01-01

The NPOESS Preparatory Project (NPP) Science Data Segment (SDS) provides a framework for the future of NASA s distributed Earth science data systems. The NPP SDS performs research and data product assessment while using a fully distributed architecture. The components of this architecture are organized around key environmental data disciplines: land, ocean, ozone, atmospheric sounding, and atmospheric composition. The SDS thus establishes a set of concepts and a working prototypes. This paper describes the framework used by the NPP Project as it enabled Measurement-Based Earth Science Data Systems for the assessment of NPP products.

Functional Interface Considerations within an Exploration Life Support System Architecture

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

2016-01-01

As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

A Prototype for the Support of Integrated Software Process Development and Improvement

NASA Astrophysics Data System (ADS)

Porrawatpreyakorn, Nalinpat; Quirchmayr, Gerald; Chutimaskul, Wichian

An efficient software development process is one of key success factors for quality software. Not only can the appropriate establishment but also the continuous improvement of integrated project management and of the software development process result in efficiency. This paper hence proposes a software process maintenance framework which consists of two core components: an integrated PMBOK-Scrum model describing how to establish a comprehensive set of project management and software engineering processes and a software development maturity model advocating software process improvement. Besides, a prototype tool to support the framework is introduced.

Forensic aspects and assessment of school bullying.

PubMed

Freeman, Bradley W; Thompson, Christopher; Jaques, Cory

2012-12-01

This article describes school's obligations related to bullying behavior, the assessment of bullying students and their victims, the evaluation of claimed damages due to bullying, and potential interventions for both individuals and school systems to reduce the frequency of bullying behavior. This article assists evaluators when assessing youth who are involved in bullying behavior, either as victims or perpetrators. Key areas highlighted include an overview of bullying behaviors, legal issues related to a school's responsibility in preventing or curtailing bullying behaviors, important components of a bullying assessment, and proposed interventions to minimize bullying. Copyright © 2012 Elsevier Inc. All rights reserved.

Integrated Distributed Directory Service for KSC

NASA Technical Reports Server (NTRS)

Ghansah, Isaac

1997-01-01

This paper describes an integrated distributed directory services (DDS) architecture as a fundamental component of KSC distributed computing systems. Specifically, an architecture for an integrated directory service based on DNS and X.500/LDAP has been suggested. The architecture supports using DNS in its traditional role as a name service and X.500 for other services. Specific designs were made in the integration of X.500 DDS for Public Key Certificates, Kerberos Security Services, Network-wide Login, Electronic Mail, WWW URLS, Servers, and other diverse network objects. Issues involved in incorporating the emerging Microsoft Active Directory Service MADS in KSC's X.500 were discussed.

Impact of peculiar features of construction of transport infrastructure on the choice of tools for reengineering of business processes

NASA Astrophysics Data System (ADS)

Khripko, Elena

2017-10-01

In the present article we study the issues of organizational resistance to reengineering of business processes in construction of transport infrastructure. Reengineering in a company of transport sector is, first and foremost, an innovative component of business strategy. We analyze the choice of forward and reverse reengineering tools and terms of their application in connection with organizational resistance. Reengineering is defined taking into account four aspects: fundamentality, radicality, abruptness, business process. We describe the stages of reengineering and analyze key requirements to newly created business processes.

Materials Research With Neutrons at NIST

PubMed Central

Cappelletti, R. L.; Glinka, C. J.; Krueger, S.; Lindstrom, R. A.; Lynn, J. W.; Prask, H. J.; Prince, E.; Rush, J. J.; Rowe, J. M.; Satija, S. K.; Toby, B. H.; Tsai, A.; Udovic, T. J.

2001-01-01

The NIST Materials Science and Engineering Laboratory works with industry, standards bodies, universities, and other government laboratories to improve the nation’s measurements and standards infrastructure for materials. An increasingly important component of this effort is carried out at the NIST Center for Neutron Research (NCNR), at present the most productive center of its kind in the United States. This article gives a brief historical account of the growth and activities of the Center with examples of its work in major materials research areas and describes the key role the Center can expect to play in future developments. PMID:27500021

Phase noise in oscillators as differential-algebraic systems with colored noise sources

NASA Astrophysics Data System (ADS)

Demir, Alper

2004-05-01

Oscillators are key components of many kinds of systems, particularly electronic and opto-electronic systems. Undesired perturbations, i.e. noise, in practical systems adversely affect the spectral and timing properties of the signals generated by oscillators resulting in phase noise and timing jitter, which are key performance limiting factors, being major contributors to bit-error-rate (BER) of RF and possibly optical communication systems, and creating synchronization problems in clocked and sampled-data electronic systems. In this paper, we review our work on the theory and numerical methods for nonlinear perturbation and noise analysis of oscillators described by a system of differential-algebraic equations (DAEs) with white and colored noise sources. The bulk of the work reviewed in this paper first appeared in [1], then in [2] and [3]. Prior to the work mentioned above, we developed a theory and numerical methods for nonlinear perturbation and noise analysis of oscillators described by a system of ordinary differential equations (ODEs) with white noise sources only [4, 5]. In this paper, we also discuss some open problems and issues in the modeling and analysis of phase noise both in free running oscillators and in phase/injection-locked ones.

Advanced Electrical Materials and Components Being Developed

NASA Technical Reports Server (NTRS)

Schwarze, Gene E.

2004-01-01

All aerospace systems require power management and distribution (PMAD) between the energy and power source and the loads. The PMAD subsystem can be broadly described as the conditioning and control of unregulated power from the energy source and its transmission to a power bus for distribution to the intended loads. All power and control circuits for PMAD require electrical components for switching, energy storage, voltage-to-current transformation, filtering, regulation, protection, and isolation. Advanced electrical materials and component development technology is a key technology to increasing the power density, efficiency, reliability, and operating temperature of the PMAD. The primary means to develop advanced electrical components is to develop new and/or significantly improved electronic materials for capacitors, magnetic components, and semiconductor switches and diodes. The next important step is to develop the processing techniques to fabricate electrical and electronic components that exceed the specifications of presently available state-of-the-art components. The NASA Glenn Research Center's advanced electrical materials and component development technology task is focused on the following three areas: 1) New and/or improved dielectric materials for the development of power capacitors with increased capacitance volumetric efficiency, energy density, and operating temperature; 2) New and/or improved high-frequency, high-temperature soft magnetic materials for the development of transformers and inductors with increased power density, energy density, electrical efficiency, and operating temperature; 3) Packaged high-temperature, high-power density, high-voltage, and low-loss SiC diodes and switches.

Protein aggregation, cardiovascular diseases, and exercise training: Where do we stand?

PubMed

Gouveia, Marisol; Xia, Ke; Colón, Wilfredo; Vieira, Sandra I; Ribeiro, Fernando

2017-11-01

Cells ensure their protein quality control through the proteostasis network. Aging and age-related diseases, such as neurodegenerative and cardiovascular diseases, have been associated to the reduction of proteostasis network efficiency and, consequently, to the accumulation of protein misfolded aggregates. The decline in protein homeostasis has been associated with the development and progression of atherosclerotic cardiovascular disease, cardiac hypertrophy, cardiomyopathies, and heart failure. Exercise training is a key component of the management of patients with cardiovascular disease, consistently improving quality of life and prognosis. In this review, we give an overview on age-related protein aggregation, the role of the increase of misfolded protein aggregates on cardiovascular pathophysiology, and describe the beneficial or deleterious effects of the proteostasis network on the development of cardiovascular disease. We subsequently discuss how exercise training, a key lifestyle intervention in those with cardiovascular disease, could restore proteostasis and improve disease status. Copyright © 2017 Elsevier B.V. All rights reserved.

Applications of Ionic Liquids for the Development of Optical Chemical Sensors and Biosensors.

PubMed

Muginova, Svetlana V; Myasnikova, Dina A; Kazarian, Sergei G; Shekhovtsova, Tatiana N

2017-01-01

This paper reviews the primary literature reporting the use of ionic liquids (ILs) in optical sensing technologies. The optical chemical sensors that have been developed with the assistance of ILs are classified according to the type of resultant material. Key aspects of applying ILs in such sensors are revealed and discussed. They include using ILs as solvents for the synthesis of sensor matrix materials; additives in polymer matrices; matrix materials; modifiers of the surfaces; and multifunctional sensor components. The operational principles, design, texture, and analytical characteristics of the offered sensors for determining CO 2 , O 2 , metal ions, CN - , and various organic compounds are critically discussed. The key advantages and disadvantages of using ILs in optical sensing technologies are defined. Finally, the applicability of the described materials for chemical analysis is evaluated, and possibilities for their further modernization are outlined.

Thermoelectric-Driven Sustainable Sensing and Actuation Systems for Fault-Tolerant Nuclear Incidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Longtin, Jon

2016-02-08

The Fukushima Daiichi nuclear incident in March 2011 represented an unprecedented stress test on the safety and backup systems of a nuclear power plant. The lack of reliable information from key components due to station blackout was a serious setback, leaving sensing, actuation, and reporting systems unable to communicate, and safety was compromised. Although there were several independent backup power sources for required safety function on site, ultimately the batteries were drained and the systems stopped working. If, however, key system components were instrumented with self-powered sensing and actuation packages that could report indefinitely on the status of the system,more » then critical system information could be obtained while providing core actuation and control during off-normal status for as long as needed. This research project focused on the development of such a self-powered sensing and actuation system. The electrical power is derived from intrinsic heat in the reactor components, which is both reliable and plentiful. The key concept was based around using thermoelectric generators that can be integrated directly onto key nuclear components, including pipes, pump housings, heat exchangers, reactor vessels, and shielding structures, as well as secondary-side components. Thermoelectric generators are solid-state devices capable of converting heat directly into electricity. They are commercially available technology. They are compact, have no moving parts, are silent, and have excellent reliability. The key components to the sensor package include a thermoelectric generator (TEG), microcontroller, signal processing, and a wireless radio package, environmental hardening to survive radiation, flooding, vibration, mechanical shock (explosions), corrosion, and excessive temperature. The energy harvested from the intrinsic heat of reactor components can be then made available to power sensors, provide bi-directional communication, recharge batteries for other safety systems, etc. Such an approach is intrinsically fault tolerant: in the event that system temperatures increase, the amount of available energy will increase, which will make more power available for applications. The system can also be used during normal conditions to provide enhanced monitoring of key system components.« less

Applying sociodramatic methods in teaching transition to palliative care.

PubMed

Baile, Walter F; Walters, Rebecca

2013-03-01

We introduce the technique of sociodrama, describe its key components, and illustrate how this simulation method was applied in a workshop format to address the challenge of discussing transition to palliative care. We describe how warm-up exercises prepared 15 learners who provide direct clinical care to patients with cancer for a dramatic portrayal of this dilemma. We then show how small-group brainstorming led to the creation of a challenging scenario wherein highly optimistic family members of a 20-year-old young man with terminal acute lymphocytic leukemia responded to information about the lack of further anticancer treatment with anger and blame toward the staff. We illustrate how the facilitators, using sociodramatic techniques of doubling and role reversal, helped learners to understand and articulate the hidden feelings of fear and loss behind the family's emotional reactions. By modeling effective communication skills, the facilitators demonstrated how key communication skills, such as empathic responses to anger and blame and using "wish" statements, could transform the conversation from one of conflict to one of problem solving with the family. We also describe how we set up practice dyads to give the learners an opportunity to try out new skills with each other. An evaluation of the workshop and similar workshops we conducted is presented. Copyright © 2013 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

CTLs, a new class of RING-H2 ubiquitin ligases uncovered by YEELL, a motif close to the RING domain that is present across eukaryotes.

PubMed

Jiménez-López, Domingo; Aguilar-Henonin, Laura; González-Prieto, Juan Manuel; Aguilar-Hernández, Victor; Guzmán, Plinio

2018-01-01

RING ubiquitin E3 ligases enclose a RING domain for ubiquitin ligase activity and associated domains and/or conserved motifs outside the RING domain that collectively facilitate their classification and usually reveal some of key information related to mechanism of action. Here we describe a new family of E3 ligases that encodes a RING-H2 domain related in sequence to the ATL and BTL RING-H2 domains. This family, named CTL, encodes a motif designed as YEELL that expands 21 amino acids next to the RING-H2 domain that is present across most eukaryotic lineages. E3 ubiquitin ligase BIG BROTHER is a plant CTL that regulates organ size, and SUMO-targeted ubiquitin E3 ligase RNF111/ARKADIA is a vertebrate CTL. Basal animal and vertebrate, as well as fungi species, encode a single CTL gene that constraints the number of paralogs observed in vertebrates. Conversely, as previously described in ATL and BTL families in plants, CTL genes range from a single copy in green algae and 3 to 5 copies in basal species to 9 to 35 copies in angiosperms. Our analysis describes key structural features of a novel family of E3 ubiquitin ligases as an integral component of the set of core eukaryotic genes.

CTLs, a new class of RING-H2 ubiquitin ligases uncovered by YEELL, a motif close to the RING domain that is present across eukaryotes

PubMed Central

Jiménez-López, Domingo; Aguilar-Henonin, Laura; González-Prieto, Juan Manuel; Aguilar-Hernández, Victor

2018-01-01

RING ubiquitin E3 ligases enclose a RING domain for ubiquitin ligase activity and associated domains and/or conserved motifs outside the RING domain that collectively facilitate their classification and usually reveal some of key information related to mechanism of action. Here we describe a new family of E3 ligases that encodes a RING-H2 domain related in sequence to the ATL and BTL RING-H2 domains. This family, named CTL, encodes a motif designed as YEELL that expands 21 amino acids next to the RING-H2 domain that is present across most eukaryotic lineages. E3 ubiquitin ligase BIG BROTHER is a plant CTL that regulates organ size, and SUMO-targeted ubiquitin E3 ligase RNF111/ARKADIA is a vertebrate CTL. Basal animal and vertebrate, as well as fungi species, encode a single CTL gene that constraints the number of paralogs observed in vertebrates. Conversely, as previously described in ATL and BTL families in plants, CTL genes range from a single copy in green algae and 3 to 5 copies in basal species to 9 to 35 copies in angiosperms. Our analysis describes key structural features of a novel family of E3 ubiquitin ligases as an integral component of the set of core eukaryotic genes. PMID:29324855

Role of filament annealing in the kinetics and thermodynamics of nucleated polymerization.

PubMed

Michaels, Thomas C T; Knowles, Tuomas P J

2014-06-07

The formation of nanoscale protein filaments from soluble precursor molecules through nucleated polymerization is a common form of supra-molecular assembly phenomenon. This process underlies the generation of a range of both functional and pathological structures in nature. Filament breakage has emerged as a key process controlling the kinetics of the growth reaction since it increases the number of filament ends in the system that can act as growth sites. In order to ensure microscopic reversibility, however, the inverse process of fragmentation, end-to-end annealing of filaments, is a necessary component of a consistent description of such systems. Here, we combine Smoluchowski kinetics with nucleated polymerization models to generate a master equation description of protein fibrillization, where filamentous structures can undergo end-to-end association, in addition to elongation, fragmentation, and nucleation processes. We obtain self-consistent closed-form expressions for the growth kinetics and discuss the key physics that emerges from considering filament fusion relative to current fragmentation only models. Furthermore, we study the key time scales that describe relaxation to equilibrium.

Extra virgin olive oil: a key functional food for prevention of immune-inflammatory diseases.

PubMed

Aparicio-Soto, Marina; Sánchez-Hidalgo, Marina; Rosillo, Ma Ángeles; Castejón, Ma Luisa; Alarcón-de-la-Lastra, Catalina

2016-11-09

Nowadays, it is clear that an unhealthy diet is one of the prime factors that contributes to the rise of inflammatory diseases and autoimmunity in the populations of both developed and developing countries. The Mediterranean diet has been associated with a reduced incidence of certain pathologies related to chronic inflammation and the immune system. Olive oil, the principal source of dietary lipids of the Mediterranean diet, possesses a high nutritional quality and a particular composition, which is especially relevant in the case of Extra Virgin Olive Oil (EVOO). EVOO is obtained from olives solely by mechanical or other physical preparation methods, under conditions that do not alter the natural composition. EVOO is described as a key bioactive food with multiple beneficial properties and it may be effective in the management of some immune-inflammatory diseases. In this review, the key research is summarised which provides evidence of the beneficial effects of EVOO and its minor components focusing on their mechanisms on immune-inflammatory diseases such as rheumatoid arthritis, systemic lupus erythematosus, inflammatory bowel disease and sclerosis.

Special Education Law: Illustrative Basics and Nuances of Key IDEA Components

ERIC Educational Resources Information Center

Zirkel, Perry A.

2015-01-01

Intended as professional development for both new and experienced special educators, this article provides both the basic requirements and nuanced issues for foundational, successive, and overlapping key components under the Individuals With Disabilities Education Act (IDEA): (a) child find, (b) eligibility, and (c) free appropriate public…

Childhood Immunization: A Key Component of Early Childhood Development

ERIC Educational Resources Information Center

Messonnier, Nancy

2017-01-01

Physical health is a key component of early childhood development and school readiness. By keeping children healthy and decreasing the chances of disease outbreaks, immunizations help early childhood programs create a safe environment for children. While overall vaccination rates are high nationally for most vaccines routinely recommended for…

A Connected History of Health and Education: Learning Together toward a Better City

ERIC Educational Resources Information Center

Howard, Joanne; Howard, Diane; Dotson, Ebbin

2015-01-01

The infrastructure, financial, and human resource histories of health and education are offered as key components of future strategic planning initiatives in learning cities, and 10 key components of strategic planning initiatives designed to enhance the health and wealth of citizens of learning cities are discussed.

Analyzer-based phase-contrast imaging system using a micro focus x-ray source

NASA Astrophysics Data System (ADS)

Zhou, Wei; Majidi, Keivan; Brankov, Jovan G.

2014-08-01

Here we describe a new in-laboratory analyzer based phase contrast-imaging (ABI) instrument using a conventional X-ray tube source (CXS) aimed at bio-medical imaging applications. Phase contrast-imaging allows visualization of soft tissue details usually obscured in conventional X-ray imaging. The ABI system design and major features are described in detail. The key advantage of the presented system, over the few existing CXS ABI systems, is that it does not require high precision components, i.e., CXS, X-ray detector, and electro-mechanical components. To overcome a main problem introduced by these components, identified as temperature stability, the system components are kept at a constant temperature inside of three enclosures, thus minimizing the electrical and mechanical thermal drifts. This is achieved by using thermoelectric (Peltier) cooling/heating modules that are easy to control precisely. For CXS we utilized a microfocus X-ray source with tungsten (W) anode material. In addition the proposed system eliminates tungsten's multiple spectral lines by selecting monochromator crystal size appropriately therefore eliminating need for the costly mismatched, two-crystal monochromator. The system imaging was fine-tuned for tungsten Kα1 line with the energy of 59.3 keV since it has been shown to be of great clinical significance by a number of researchers at synchrotron facilities. In this way a laboratory system that can be used for evaluating and quantifying tissue properties, initially explored at synchrotron facilities, would be of great interest to a larger research community. To demonstrate the imaging capability of our instrument we use a chicken thigh tissue sample.

Multicomponent reactions provide key molecules for secret communication.

PubMed

Boukis, Andreas C; Reiter, Kevin; Frölich, Maximiliane; Hofheinz, Dennis; Meier, Michael A R

2018-04-12

A convenient and inherently more secure communication channel for encoding messages via specifically designed molecular keys is introduced by combining advanced encryption standard cryptography with molecular steganography. The necessary molecular keys require large structural diversity, thus suggesting the application of multicomponent reactions. Herein, the Ugi four-component reaction of perfluorinated acids is utilized to establish an exemplary database consisting of 130 commercially available components. Considering all permutations, this combinatorial approach can unambiguously provide 500,000 molecular keys in only one synthetic procedure per key. The molecular keys are transferred nondigitally and concealed by either adsorption onto paper, coffee, tea or sugar as well as by dissolution in a perfume or in blood. Re-isolation and purification from these disguises is simplified by the perfluorinated sidechains of the molecular keys. High resolution tandem mass spectrometry can unequivocally determine the molecular structure and thus the identity of the key for a subsequent decryption of an encoded message.

2006 Precision Strike Technology Symposium

DTIC Science & Technology

2006-10-19

s Navy Unique Joint system 14 A/C Unique Components Framework JMPS Common Components Crypto Key GCCS-M Interface Carrier Intel Feed Carrier...210 GPS Prediction CUPC GPS Crypto Key TAMMAC SLAM-ER GPS Almanac ETIRMS PMA-281 NGMS PMA-209 Boeing PMA-201 Raytheon ESC (USAF) Hill AFB PMA-234 PMA...242 F/A-18 UPC GPS Prediction CUPC GPS Crypto Key TAMMAC SLAM-ER GPS Almanac HARM WASP Framework ARC-210 ETIRMS PMA-281 Integration/Test/ Support TLAM

Secure content objects

DOEpatents

Evans, William D [Cupertino, CA

2009-02-24

A secure content object protects electronic documents from unauthorized use. The secure content object includes an encrypted electronic document, a multi-key encryption table having at least one multi-key component, an encrypted header and a user interface device. The encrypted document is encrypted using a document encryption key associated with a multi-key encryption method. The encrypted header includes an encryption marker formed by a random number followed by a derivable variation of the same random number. The user interface device enables a user to input a user authorization. The user authorization is combined with each of the multi-key components in the multi-key encryption key table and used to try to decrypt the encrypted header. If the encryption marker is successfully decrypted, the electronic document may be decrypted. Multiple electronic documents or a document and annotations may be protected by the secure content object.

Measuring infrastructure: A key step in program evaluation and planning

PubMed Central

Schmitt, Carol L.; Glasgow, LaShawn; Lavinghouze, S. Rene; Rieker, Patricia P.; Fulmer, Erika; McAleer, Kelly; Rogers, Todd

2016-01-01

State tobacco prevention and control programs (TCPs) require a fully functioning infrastructure to respond effectively to the Surgeon General’s call for accelerating the national reduction in tobacco use. The literature describes common elements of infrastructure; however, a lack of valid and reliable measures has made it difficult for program planners to monitor relevant infrastructure indicators and address observed deficiencies, or for evaluators to determine the association among infrastructure, program efforts, and program outcomes. The Component Model of Infrastructure (CMI) is a comprehensive, evidence-based framework that facilitates TCP program planning efforts to develop and maintain their infrastructure. Measures of CMI components were needed to evaluate the model’s utility and predictive capability for assessing infrastructure. This paper describes the development of CMI measures and results of a pilot test with nine state TCP managers. Pilot test findings indicate that the tool has good face validity and is clear and easy to follow. The CMI tool yields data that can enhance public health efforts in a funding-constrained environment and provides insight into program sustainability. Ultimately, the CMI measurement tool could facilitate better evaluation and program planning across public health programs. PMID:27037655

Measuring infrastructure: A key step in program evaluation and planning.

PubMed

Schmitt, Carol L; Glasgow, LaShawn; Lavinghouze, S Rene; Rieker, Patricia P; Fulmer, Erika; McAleer, Kelly; Rogers, Todd

2016-06-01

State tobacco prevention and control programs (TCPs) require a fully functioning infrastructure to respond effectively to the Surgeon General's call for accelerating the national reduction in tobacco use. The literature describes common elements of infrastructure; however, a lack of valid and reliable measures has made it difficult for program planners to monitor relevant infrastructure indicators and address observed deficiencies, or for evaluators to determine the association among infrastructure, program efforts, and program outcomes. The Component Model of Infrastructure (CMI) is a comprehensive, evidence-based framework that facilitates TCP program planning efforts to develop and maintain their infrastructure. Measures of CMI components were needed to evaluate the model's utility and predictive capability for assessing infrastructure. This paper describes the development of CMI measures and results of a pilot test with nine state TCP managers. Pilot test findings indicate that the tool has good face validity and is clear and easy to follow. The CMI tool yields data that can enhance public health efforts in a funding-constrained environment and provides insight into program sustainability. Ultimately, the CMI measurement tool could facilitate better evaluation and program planning across public health programs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Neogenin recruitment of the WAVE regulatory complex maintains adherens junction stability and tension

PubMed Central

Lee, Natalie K.; Fok, Ka Wai; White, Amanda; Wilson, Nicole H.; O'Leary, Conor J.; Cox, Hayley L.; Michael, Magdalene; Yap, Alpha S.; Cooper, Helen M.

2016-01-01

To maintain tissue integrity during epithelial morphogenesis, adherens junctions (AJs) must resist the mechanical stresses exerted by dynamic tissue movements. Junctional stability is dependent on actomyosin contractility within the actin ring. Here we describe a novel function for the axon guidance receptor, Neogenin, as a key component of the actin nucleation machinery governing junctional stability. Loss of Neogenin perturbs AJs and attenuates junctional tension. Neogenin promotes actin nucleation at AJs by recruiting the Wave regulatory complex (WRC) and Arp2/3. A direct interaction between the Neogenin WIRS domain and the WRC is crucial for the spatially restricted recruitment of the WRC to the junction. Thus, we provide the first example of a functional WIRS–WRC interaction in epithelia. We further show that Neogenin regulates cadherin recycling at the AJ. In summary, we identify Neogenin as a pivotal component of the AJ, where it influences both cadherin dynamics and junctional tension. PMID:27029596

Tunable wavefront coded imaging system based on detachable phase mask: Mathematical analysis, optimization and underlying applications

NASA Astrophysics Data System (ADS)

Zhao, Hui; Wei, Jingxuan

2014-09-01

The key to the concept of tunable wavefront coding lies in detachable phase masks. Ojeda-Castaneda et al. (Progress in Electronics Research Symposium Proceedings, Cambridge, USA, July 5-8, 2010) described a typical design in which two components with cosinusoidal phase variation operate together to make defocus sensitivity tunable. The present study proposes an improved design and makes three contributions: (1) A mathematical derivation based on the stationary phase method explains why the detachable phase mask of Ojeda-Castaneda et al. tunes the defocus sensitivity. (2) The mathematical derivations show that the effective bandwidth wavefront coded imaging system is also tunable by making each component of the detachable phase mask move asymmetrically. An improved Fisher information-based optimization procedure was also designed to ascertain the optimal mask parameters corresponding to specific bandwidth. (3) Possible applications of the tunable bandwidth are demonstrated by simulated imaging.

MSFC ISS Resource Reel 2016

NASA Image and Video Library

2016-04-01

International Space Station Resource Reel. This video describes shows the International Space Station components, such as the Destiny laboratory and the Quest Airlock, being manufactured at NASA's Marshall Space Flight Center in Huntsville, Ala. It provides manufacturing and ground testing video and in-flight video of key space station components: the Microgravity Science Glovebox, the Materials Science Research Facility, the Window Observational Research Facility, the Environmental Control Life Support System, and basic research racks. There is video of people working in Marshall's Payload Operations Integration Center where controllers operate experiments 24/7, 365 days a week. Various crews are shown conducting experiments on board the station. PAO Name:Jennifer Stanfield Phone Number:256-544-0034 Email Address: JENNIFER.STANFIELD@NASA.GOV Name/Title of Video: ISS Resource Reel Description: ISS Resource Reel Graphic Information: NASA PAO Name:Tracy McMahan Phone Number:256-544-1634 Email Address: tracy.mcmahan@nasa.gov

Real-Time Discovery Services over Large, Heterogeneous and Complex Healthcare Datasets Using Schema-Less, Column-Oriented Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Begoli, Edmon; Dunning, Ted; Charlie, Frasure

We present a service platform for schema-leess exploration of data and discovery of patient-related statistics from healthcare data sets. The architecture of this platform is motivated by the need for fast, schema-less, and flexible approaches to SQL-based exploration and discovery of information embedded in the common, heterogeneously structured healthcare data sets and supporting components (electronic health records, practice management systems, etc.) The motivating use cases described in the paper are clinical trials candidate discovery, and a treatment effectiveness analysis. Following the use cases, we discuss the key features and software architecture of the platform, the underlying core components (Apache Parquet,more » Drill, the web services server), and the runtime profiles and performance characteristics of the platform. We conclude by showing dramatic speedup with some approaches, and the performance tradeoffs and limitations of others.« less

Soft optics in intelligent optical networks

NASA Astrophysics Data System (ADS)

Shue, Chikong; Cao, Yang

2001-10-01

In addition to the recent advances in Hard-optics that pushes the optical transmission speed, distance, wave density and optical switching capacity, Soft-optics provides the necessary intelligence and control software that reduces operational costs, increase efficiency, and enhances revenue generating services by automating optimal optical circuit placement and restoration, and enabling value-added new services like Optical VPN. This paper describes the advances in 1) Overall Hard-optics and Soft-optics 2) Layered hierarchy of Soft-optics 3) Component of Soft-optics, including hard-optics drivers, Management Soft-optics, Routing Soft-optics and System Soft-optics 4) Key component of Routing and System Soft-optics, namely optical routing and signaling (including UNI/NNI and GMPLS signaling). In summary, the soft-optics on a new generation of OXC's enables Intelligent Optical Networks to provide just-in-time service delivery and fast restoration, and real-time capacity management that eliminates stranded bandwidth. It reduces operational costs and provides new revenue opportunities.

Wavefront tilt feedforward for the formation interferometer testbad (FIT)

NASA Technical Reports Server (NTRS)

Shields, J. F.; Liewer, K.; Wehmeier, U.

2002-01-01

Separated spacecraft interferometry is a candidate architecture for several future NASA missions. The Formation Interferometer Testbed (FIT) is a ground based testbed dedicated to the validation of this key technology for a formation of two spacecraft. In separated spacecraft interferometry, the residual relative motion of the component spacecraft must be compensated for by articulation of the optical components. In this paper, the design of the FIT interferometer pointing control system is described. This control system is composed of a metrology pointing loop that maintains an optical link between the two spacecraft and two stellar pointing loops for stabilizing the stellar wavefront at both the right and left apertures of the instrument. A novel feedforward algorithm is used to decouple the metrology loop from the left side stellar loop. Experimental results from the testbed are presented that verify this approach and that fully demonstrate the performance of the algorithm.

Single-molecule dynamic force spectroscopy of the fibronectin-heparin interaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, Gabriel; Lamontagne, Charles-Antoine; Lebel, Rejean

2007-12-21

The integrity of cohesive tissues strongly depends on the presence of the extracellular matrix, which provides support and anchorage for cells. The fibronectin protein and the heparin-like glycosaminoglycans are key components of this dynamic structural network. In this report, atomic force spectroscopy was used to gain insight into the compliance and the resistance of the fibronectin-heparin interaction. We found that this interaction can be described by an energetic barrier width of 3.1 {+-} 0.2 A and an off-rate of 0.2 {+-} 0.1 s{sup -1}. These dissociation parameters are similar to those of other carbohydrate-protein interactions and to off-rate values reportedmore » for more complex interactions between cells and extracellular matrix components. Our results indicate that the function of the fibronectin-heparin interaction is supported by its capacity to sustain significant deformations and considerable external mechanical forces.« less

Development of Parametric Mass and Volume Models for an Aerospace SOFC/Gas Turbine Hybrid System

NASA Technical Reports Server (NTRS)

Tornabene, Robert; Wang, Xiao-yen; Steffen, Christopher J., Jr.; Freeh, Joshua E.

2005-01-01

In aerospace power systems, mass and volume are key considerations to produce a viable design. The utilization of fuel cells is being studied for a commercial aircraft electrical power unit. Based on preliminary analyses, a SOFC/gas turbine system may be a potential solution. This paper describes the parametric mass and volume models that are used to assess an aerospace hybrid system design. The design tool utilizes input from the thermodynamic system model and produces component sizing, performance, and mass estimates. The software is designed such that the thermodynamic model is linked to the mass and volume model to provide immediate feedback during the design process. It allows for automating an optimization process that accounts for mass and volume in its figure of merit. Each component in the system is modeled with a combination of theoretical and empirical approaches. A description of the assumptions and design analyses is presented.

Using glutamate homeostasis as a target for treating addictive disorders

PubMed Central

Reissner, Kathryn J.; Kalivas, Peter W.

2010-01-01

Well-developed cellular mechanisms exist to preserve glutamate homeostasis and regulate extrasynaptic glutamate levels. Accumulating evidence indicates that disruptions in glutamate homeostasis are associated with addictive disorders. The disruptions in glutamate concentrations observed following prolonged exposure to drugs of abuse are associated with changes in the function and activity of several key components within the homeostatic control mechanism, including the cystine/glutamate exchanger xc− and the glial glutamate transporter EAAT2/GLT-1. Changes in the balance between synaptic and extrasynaptic glutamate levels in turn influence signaling through pre- and postsynaptic glutamate receptors, and thus affect synaptic plasticity and circuit-level activity. In this review we describe the evidence for impaired glutamate homestasis as a critical mediator of long-term drug-seeking behaviors, how chronic neuroadaptations in xc− and GLT-1 mediate a disruption in glutamate homeostasis, and how targeting these components restores glutamate levels and inhibits drug-seeking behaviors. PMID:20634691

Innate immunity in vertebrates: an overview.

PubMed

Riera Romo, Mario; Pérez-Martínez, Dayana; Castillo Ferrer, Camila

2016-06-01

Innate immunity is a semi-specific and widely distributed form of immunity, which represents the first line of defence against pathogens. This type of immunity is critical to maintain homeostasis and prevent microbe invasion, eliminating a great variety of pathogens and contributing with the activation of the adaptive immune response. The components of innate immunity include physical and chemical barriers, humoral and cell-mediated components, which are present in all jawed vertebrates. The understanding of innate defence mechanisms in non-mammalian vertebrates is the key to comprehend the general picture of vertebrate innate immunity and its evolutionary history. This is also essential for the identification of new molecules with applications in immunopharmacology and immunotherapy. In this review, we describe and discuss the main elements of vertebrate innate immunity, presenting core findings in this field and identifying areas that need further investigation. © 2016 John Wiley & Sons Ltd.

Abnormal gene expression profiles in human ovaries from polycystic ovary syndrome patients.

PubMed

Jansen, Erik; Laven, Joop S E; Dommerholt, Henri B R; Polman, Jan; van Rijt, Cindy; van den Hurk, Caroline; Westland, Jolanda; Mosselman, Sietse; Fauser, Bart C J M

2004-12-01

Polycystic ovary syndrome (PCOS) represents the most common cause of anovulatory infertility and affects 5-10% of women of reproductive age. The etiology of PCOS is still unknown. The current study is the first to describe consistent differences in gene expression profiles in human ovaries comparing PCOS patients vs. healthy normoovulatory individuals. The microarray analysis of PCOS vs. normal ovaries identifies dysregulated expression of genes encoding components of several biological pathways or systems such as Wnt signaling, extracellular matrix components, and immunological factors. Resulting data may provide novel clues for ovarian dysfunction in PCOS. Intriguingly, the gene expression profiles of ovaries from (long-term) androgen-treated female-to-male transsexuals (TSX) show considerable overlap with PCOS. This observation provides supportive evidence that androgens play a key role in the pathogenesis of PCOS. Presented data may contribute to a better understanding of dysregulated pathways in PCOS, which might ultimately reveal novel leads for therapeutic intervention.

Time Domains of the Hypoxic Ventilatory Response and Their Molecular Basis

PubMed Central

Pamenter, Matthew E.; Powell, Frank L.

2016-01-01

Ventilatory responses to hypoxia vary widely depending on the pattern and length of hypoxic exposure. Acute, prolonged, or intermittent hypoxic episodes can increase or decrease breathing for seconds to years, both during the hypoxic stimulus, and also after its removal. These myriad effects are the result of a complicated web of molecular interactions that underlie plasticity in the respiratory control reflex circuits and ultimately control the physiology of breathing in hypoxia. Since the time domains of the physiological hypoxic ventilatory response (HVR) were identified, considerable research effort has gone toward elucidating the underlying molecular mechanisms that mediate these varied responses. This research has begun to describe complicated and plastic interactions in the relay circuits between the peripheral chemoreceptors and the ventilatory control circuits within the central nervous system. Intriguingly, many of these molecular pathways seem to share key components between the different time domains, suggesting that varied physiological HVRs are the result of specific modifications to overlapping pathways. This review highlights what has been discovered regarding the cell and molecular level control of the time domains of the HVR, and highlights key areas where further research is required. Understanding the molecular control of ventilation in hypoxia has important implications for basic physiology and is emerging as an important component of several clinical fields. PMID:27347896

Challenges in defining 'palliative care' for the purposes of clinical trials.

PubMed

Bausewein, Claudia; Higginson, Irene J

2012-12-01

Palliative care has become part of mainstream medicine with increasing evidence about the effectiveness of specialist palliative care (SPC) on patient and family outcomes. Comparison of studies testing SPC interventions is challenging as types of interventions and reporting of components of the intervention vary. In consequence, study results are difficult to interpret. There is a continuous lack of clarity in palliative care definitions. For clinical trials, multidisciplinary care, supportive care documentation, symptom assessment and symptom management are suggested as key domains. In recent studies testing palliative care as an intervention SPC physicians and palliative care nurses were core members of multiprofessional teams, but integration of other team members varied. Management of symptoms and psychosocial issues were central to SPC with various other areas described. Services were delivered by hospital and community support teams, in palliative care units, outpatient clinics and hospital. Cost information was only provided by a few studies. Due to the lack of an agreed definition of palliative care and heterogeneity in reporting of components of an SPC intervention comparison of studies remains challenging. Key aspects of palliative care interventions are incurable disease, multidisciplinary approach, focus on symptom management including standardized assessment, psychosocial and family support, and (advance) care planning. Detailed information about all aspects of the intervention should be provided.

SQUIRE 2.0 (Standards for QUality Improvement Reporting Excellence): revised publication guidelines from a detailed consensus process.

PubMed

Ogrinc, Greg; Davies, Louise; Goodman, Daisy; Batalden, Paul; Davidoff, Frank; Stevens, David

2016-12-01

Since the publication of Standards for QUality Improvement Reporting Excellence (SQUIRE 1.0) guidelines in 2008, the science of the field has advanced considerably. In this manuscript, we describe the development of SQUIRE 2.0 and its key components. We undertook the revision between 2012 and 2015 using (1) semistructured interviews and focus groups to evaluate SQUIRE 1.0 plus feedback from an international steering group, (2) two face-to-face consensus meetings to develop interim drafts and (3) pilot testing with authors and a public comment period. SQUIRE 2.0 emphasises the reporting of three key components of systematic efforts to improve the quality, value and safety of healthcare: the use of formal and informal theory in planning, implementing and evaluating improvement work; the context in which the work is done and the study of the intervention(s). SQUIRE 2.0 is intended for reporting the range of methods used to improve healthcare, recognising that they can be complex and multidimensional. It provides common ground to share these discoveries in the scholarly literature (http://www.squire-statement.org). Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

End-to-end communication test on variable length packet structures utilizing AOS testbed

NASA Technical Reports Server (NTRS)

Miller, Warner H.; Sank, V.; Fong, Wai; Miko, J.; Powers, M.; Folk, John; Conaway, B.; Michael, K.; Yeh, Pen-Shu

1994-01-01

This paper describes a communication test, which successfully demonstrated the transfer of losslessly compressed images in an end-to-end system. These compressed images were first formatted into variable length Consultative Committee for Space Data Systems (CCSDS) packets in the Advanced Orbiting System Testbed (AOST). The CCSDS data Structures were transferred from the AOST to the Radio Frequency Simulations Operations Center (RFSOC), via a fiber optic link, where data was then transmitted through the Tracking and Data Relay Satellite System (TDRSS). The received data acquired at the White Sands Complex (WSC) was transferred back to the AOST where the data was captured and decompressed back to the original images. This paper describes the compression algorithm, the AOST configuration, key flight components, data formats, and the communication link characteristics and test results.

Applied Behavior Analysis Is Ideal for the Development of a Land Mine Detection Technology Using Animals

PubMed Central

Jones, B. M

2011-01-01

The detection and subsequent removal of land mines and unexploded ordnance (UXO) from many developing countries are slow, expensive, and dangerous tasks, but have the potential to improve the well-being of millions of people. Consequently, those involved with humanitarian mine and UXO clearance are actively searching for new and more efficient detection technologies. Remote explosive scent tracing (REST) using trained dogs has the potential to be one such technology. However, details regarding how best to train, test, and deploy dogs in this role have never been made publicly available. This article describes how the key characteristics of applied behavior analysis, as described by Baer, Wolf and Risley (1968, 1987), served as important objectives for the research and development of the behavioral technology component of REST while the author worked in humanitarian demining. PMID:22532731

Applied behavior analysis is ideal for the development of a land mine detection technology using animals.

PubMed

Jones, B M

2011-01-01

The detection and subsequent removal of land mines and unexploded ordnance (UXO) from many developing countries are slow, expensive, and dangerous tasks, but have the potential to improve the well-being of millions of people. Consequently, those involved with humanitarian mine and UXO clearance are actively searching for new and more efficient detection technologies. Remote explosive scent tracing (REST) using trained dogs has the potential to be one such technology. However, details regarding how best to train, test, and deploy dogs in this role have never been made publicly available. This article describes how the key characteristics of applied behavior analysis, as described by Baer, Wolf and Risley (1968, 1987), served as important objectives for the research and development of the behavioral technology component of REST while the author worked in humanitarian demining.

Thermally Simulated Testing of a Direct-Drive Gas-Cooled Nuclear Reactor

NASA Technical Reports Server (NTRS)

Godfroy, Thomas; Bragg-Sitton, Shannon; VanDyke, Melissa

2003-01-01

This paper describes the concept and preliminary component testing of a gas-cooled, UN-fueled, pin-type reactor which uses He/Xe gas that goes directly into a recuperated Brayton system to produce electricity for nuclear electric propulsion. This Direct-Drive Gas-Cooled Reactor (DDG) is designed to be subcritical under water or wet-sand immersion in case of a launch accident. Because the gas-cooled reactor can directly drive the Brayton turbomachinery, it is possible to configure the system such that there are no external surfaces or pressure boundaries that are refractory metal, even though the gas delivered to the turbine is 1144 K. The He/Xe gas mixture is a good heat transport medium when flowing, and a good insulator when stagnant. Judicious use of stagnant cavities as insulating regions allows transport of the 1144-K gas while keeping all external surfaces below 900 K. At this temperature super-alloys (Hastelloy or Inconel) can be used instead of refractory metals. Super-alloys reduce the technology risk because they are easier to fabricate than refractory metals, we have a much more extensive knowledge base on their characteristics, and, because they have a greater resistance to oxidation, system testing is eased. The system is also relatively simple in its design: no additional coolant pumps, heat exchanger, or freeze-thaw systems are required. Key to success of this concept is a good knowledge of the heat transfer between the fuel pins and the gas, as well as the pressure drop through the system. This paper describes preliminary testing to obtain this key information, as well as experience in demonstrating electrical thermal simulation of reactor components and concepts.

Direct-Drive Gas-Cooled Reactor Power System: Concept and Preliminary Testing

NASA Technical Reports Server (NTRS)

Wright, S. A.; Lipinski, R. J.; Godfroy, T. J.; Bragg-Sitton, S. M.; VanDyke, M. K.

2002-01-01

This paper describes the concept and preliminary component testing of a gas-cooled, UN-fueled, pin-type reactor which uses He/Xe gas that goes directly into a recuperated Brayton system to produce electricity for nuclear electric propulsion. This Direct-Drive Gas-Cooled Reactor (DDG) is designed to be subcritical under water or wet- sand immersion in case of a launch accident. Because the gas-cooled reactor can directly drive the Brayton turbomachinery, it is possible to configure the system such that there are no external surfaces or pressure boundaries that are refractory metal, even though the gas delivered to the turbine is 1144 K. The He/Xe gas mixture is a good heat transport medium when flowing, and a good insulator when stagnant. Judicious use of stagnant cavities as insulating regions allows transport of the 1144-K gas while keeping all external surfaces below 900 K. At this temperature super-alloys (Hastelloy or Inconel) can be used instead of refractory metals. Super-alloys reduce the technology risk because they are easier to fabricate than refractory metals, we have a much more extensive knowledge base on their characteristics, and, because they have a greater resistance to oxidation, system testing is eased. The system is also relatively simple in its design: no additional coolant pumps, heat exchanger, or freeze-thaw systems are required. Key to success of this concept is a good knowledge of the heat transfer between the fuel pins and the gas, as well as the pressure drop through the system. This paper describes preliminary testing to obtain this key information, as well as experience in demonstrating electrically heated testing of simulated reactor components.

Approaches to ensuring and improving quality in the context of health system strengthening: a cross-site analysis of the five African Health Initiative Partnership programs

PubMed Central

2013-01-01

Background Integrated into the work in health systems strengthening (HSS) is a growing focus on the importance of ensuring quality of the services delivered and systems which support them. Understanding how to define and measure quality in the different key World Health Organization building blocks is critical to providing the information needed to address gaps and identify models for replication. Description of approaches We describe the approaches to defining and improving quality across the five country programs funded through the Doris Duke Charitable Foundation African Health Initiative. While each program has independently developed and implemented country-specific approaches to strengthening health systems, they all included quality of services and systems as a core principle. We describe the differences and similarities across the programs in defining and improving quality as an embedded process essential for HSS to achieve the goal of improved population health. The programs measured quality across most or all of the six WHO building blocks, with specific areas of overlap in improving quality falling into four main categories: 1) defining and measuring quality; 2) ensuring data quality, and building capacity for data use for decision making and response to quality measurements; 3) strengthened supportive supervision and/or mentoring; and 4) operational research to understand the factors associated with observed variation in quality. Conclusions Learning the value and challenges of these approaches to measuring and improving quality across the key components of HSS as the projects continue their work will help inform similar efforts both now and in the future to ensure quality across the critical components of a health system and the impact on population health. PMID:23819662

An Exploratory Qualitative Inquiry of Key Indicators on IT Disaster Recovery Planning

ERIC Educational Resources Information Center

Gardner, Brian

2016-01-01

Disaster recovery planning is a crucial component to maintaining a business's economic stability. However, it is unclear how key performance indicators (KPIs) are perceived in the emergency medical service (EMS) industry during the disaster recover planning process. The problem addressed in this study was to understand KPIs and their components.…

Assuring Quality in Online Course Delivery

ERIC Educational Resources Information Center

Matuga, Julia M.; Wooldridge, Deborah G.; Poirier, Sandra

2011-01-01

This paper examines the critical issue of assuring quality online course delivery by examining four key components of online teaching and learning. The topic of course delivery is viewed as a cultural issue that permeates processes from the design of an online course to its evaluation. First, the authors examine and review key components of and…

Intracellular self-assembly based multi-labeling of key viral components: Envelope, capsid and nucleic acids.

PubMed

Wen, Li; Lin, Yi; Zhang, Zhi-Ling; Lu, Wen; Lv, Cheng; Chen, Zhi-Liang; Wang, Han-Zhong; Pang, Dai-Wen

2016-08-01

Envelope, capsid and nucleic acids are key viral components that are all involved in crucial events during virus infection. Thus simultaneous labeling of these key components is an indispensable prerequisite for monitoring comprehensive virus infection process and dissecting virus infection mechanism. Baculovirus was genetically tagged with biotin on its envelope protein GP64 and enhanced green fluorescent protein (EGFP) on its capsid protein VP39. Spodoptera frugiperda 9 (Sf9) cells were infected by the recombinant baculovirus and subsequently fed with streptavidin-conjugated quantum dots (SA-QDs) and cell-permeable nucleic acids dye SYTO 82. Just by genetic engineering and virus propagation, multi-labeling of envelope, capsid and nucleic acids was spontaneously accomplished during virus inherent self-assembly process, significantly simplifying the labeling process while maintaining virus infectivity. Intracellular dissociation and transportation of all the key viral components, which was barely reported previously, was real-time monitored based on the multi-labeling approach, offering opportunities for deeply understanding virus infection and developing anti-virus treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optoelectronics in TESLA, LHC, and pi-of-the-sky experiments

NASA Astrophysics Data System (ADS)

Romaniuk, Ryszard S.; Pozniak, Krzysztof T.; Wrochna, Grzegorz; Simrock, Stefan

2004-09-01

Optical and optoelectronics technologies are more and more widely used in the biggest world experiments of high energy and nuclear physics, as well as in the astronomy. The paper is a kind of a broad digest describing the usage of optoelectronics is such experiments and information about some of the involved teams. The described experiments include: TESLA linear accelerator and FEL, Compact Muon Solenoid at LHC and recently started π-of-the-sky global gamma ray bursts (with asociated optical flashes) observation experiment. Optoelectornics and photonics offer several key features which are either extending the technical parameters of existing solutions or adding quite new practical application possibilities. Some of these favorable features of photonic systems are: high selectivity of optical sensors, immunity to some kinds of noise processes, extremely broad bandwidth exchangeable for either terabit rate transmission or ultrashort pulse generation, parallel image processing capability, etc. The following groups of photonic components and systems were described: (1) discrete components applications like: LED, PD, LD, CCD and CMOS cameras, active optical crystals and optical fibers in radiation dosimetry, astronomical image processing and for building of more complex photonic systems; (2) optical fiber networks serving as very stable phase distribution, clock signal distribution, distributed dosimeters, distributed gigabit transmission for control, diagnostics and data acquisition/processing; (3) fast and stable coherent femtosecond laser systems with active optical components for electro-optical sampling and photocathode excitation in the RF electron gun for linac; The parameters of some of these systems were quoted and discussed. A number of the debated solutions seems to be competitive against the classical ones. Several future fields seem to emerge involving direct coupling between the ultrafast photonic and the VLSI FPGA based technologies.

In Vitro Assessment of Nanoparticle Effects on Blood Coagulation.

PubMed

Potter, Timothy M; Rodriguez, Jamie C; Neun, Barry W; Ilinskaya, Anna N; Cedrone, Edward; Dobrovolskaia, Marina A

2018-01-01

Blood clotting is a complex process which involves both cellular and biochemical components. The key cellular players in the blood clotting process are thrombocytes or platelets. Other cells, including leukocytes and endothelial cells, contribute to clotting by expressing the so-called pro-coagulant activity (PCA) complex on their surface. The biochemical component of blood clotting is represented by the plasma coagulation cascade, which includes plasma proteins also known as coagulation factors. The coordinated interaction between platelets, leukocytes, endothelial cells, and plasma coagulation factors is necessary for maintaining hemostasis and for preventing excessive bleeding. Undesirable activation of all or some of these components may lead to pathological blood coagulation and life-threatening conditions such as consumptive coagulopathy or disseminated intravascular coagulation (DIC). In contrast, unintended inhibition of the coagulation pathways may lead to hemorrhage. Thrombogenicity is the property of a test material to induce blood coagulation by affecting one or more elements of the clotting process. Anticoagulant activity refers to the property of a test material to inhibit coagulation. The tendency to cause platelet aggregation, perturb plasma coagulation, and induce leukocyte PCA can serve as an in vitro measure of a nanomaterial's likelihood to be pro- or anticoagulant in vivo. This chapter describes three procedures for in vitro analyses of platelet aggregation, plasma coagulation time, and activation of leukocyte PCA. Platelet aggregation and plasma coagulation procedures have been described earlier. The revision here includes updated details about nanoparticle sample preparation, selection of nanoparticle concentration for the in vitro study, and updated details about assay controls. The chapter is expanded to describe a method for the leukocyte PCA analysis and case studies demonstrating the performance of these in vitro assays.

ELITE-3 active vibration isolation workstation

NASA Astrophysics Data System (ADS)

Anderson, Eric H.; Houghton, Bowie

2001-06-01

This paper describes the development and capabilities of ELITE-3, a product that incorporates piezoelectric actuators to provide ultrastable work surfaces for very high resolution wafer production, metrology, microscopy, and other applications. The electromechanical, electronic, and software/firmware parts of the ELITE-3 active workstation are described, with an emphasis on considerations relating to the piezoelectric transducers. Performance of the system and its relation to the smart materials is discussed. As the floor beneath a vibration-sensitive instrument supported by ELITE-3 moves, piezoelectrics are controlled to minimize the motion of the instrument. A digital signal processor (DSP) determines the appropriate signals to apply to the actuators. A PC-based interface allows reprogramming of control algorithms and resetting of other parameters within the firmware. The modular product allows incorporation of vibration isolator, actuator and sensor modules into original equipment manufacturer (OEM) products. Alternatively, a workstation can be integrated as an integrated standalone system. The paper describes the system architecture, overall approach to vibration isolation, and various system components, and summarizes motivations for key design approaches.

High voltage breakdown phenomena in RF window, electron gun and RF cavities in 250 kW CW C band Klystron and their preventive measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamba, O.S.; Badola, Richa; Baloda, Suman

The paper describes voltage break down phenomenon and preventive measures in components of 250 KW CW, C band Klystron under development at CEERI Pilani. The Klystron operates at a beam voltage of 50 kV and delivers 250 kW RF power at 5 GHz frequency. The Klystron consists of several key components and regions, which are subject to high electrical stress. The most important regions of electrical breakdown are electron gun, the RF ceramic window and output cavity gap area. In the critical components voltage breakdown considered at design stage by proper gap and other techniques. All these problems discussed, asmore » well as solution to alleviate this problem. The electron gun consists basically of cathode, BFE and anode. The cathode is operated at a voltage of 50 kV. In order to maintain the voltage standoff between cathode and anode a high voltage alumina seal and RF window have been designed developed and successfully used in the tube. (author)« less

The role and application of ion beam analysis for studies of plasma-facing components in controlled fusion devices

NASA Astrophysics Data System (ADS)

Rubel, Marek; Petersson, Per; Alves, Eduardo; Brezinsek, Sebastijan; Coad, Joseph Paul; Heinola, Kalle; Mayer, Matej; Widdowson, Anna

2016-03-01

First wall materials in controlled fusion devices undergo serious modification by several physical and chemical processes arising from plasma-wall interactions. Detailed information is required for the assessment of material lifetime and accumulation of hydrogen isotopes in wall materials. The intention of this work is to give a concise overview of key issues in the characterization of plasma-facing materials and components in tokamaks, especially in JET with an ITER-Like Wall. IBA techniques play a particularly prominent role here because of their isotope selectivity in the low-Z range (1-10), high sensitivity and combination of several methods in a single run. The role of 3He-based NRA, RBS (standard and micro-size beam) and HIERDA in fuel retention and material migration studies is presented. The use of tracer techniques with rare isotopes (e.g. 15N) or marker layers on wall diagnostic components is described. Special instrumentation, development of equipment to enhance research capabilities and issues in handling of contaminated materials are addressed.

Controls and Health Management Technologies for Intelligent Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Garg, Sanjay

2004-01-01

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Technology Branch at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of an Intelligent Engine. The key enabling technologies for an Intelligent Engine are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This paper describes the current activities of the Controls and Dynamics Technology Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

Introduction to Advanced Engine Control Concepts

NASA Technical Reports Server (NTRS)

Sanjay, Garg

2007-01-01

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of Intelligent Propulsion Systems. The key enabling technologies for an Intelligent Propulsion System are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance operational reliability and component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This presentation describes the current activities of the Controls and Dynamics Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

The Development of Environmental Barrier Coatings for SiCSiC Ceramic Matrix Composites: Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Zhu, Dongming

2014-01-01

Environmental barrier coatings (EBCs) and SiC/SiC ceramic matrix composites (CMCs) systems will play a crucial role in future turbine engines for hot-section component applications because of their ability to significantly increase engine operating temperatures, reduce engine weight and cooling requirements. The development of prime-reliant environmental barrier coatings is a key to enable the applications of the envisioned CMC components to help achieve next generation engine performance and durability goals. This paper will primarily address the performance requirements and design considerations of environmental barrier coatings for turbine engine applications. The emphasis is placed on current candidate environmental barrier coating systems for SiCSiC CMCs, their performance benefits and design limitations in long-term operation and combustion environments. Major technical barriers in developing advanced environmental barrier coating systems, the coating integrations with next generation CMC turbine components having improved environmental stability, cyclic durability and system performance will be described. The development trends for turbine environmental barrier coating systems by utilizing improved compositions, state-of-the-art processing methods, and simulated environment testing and durability modeling will be discussed.

Proposed biomimetic molecular sensor array for astrobiology applications

NASA Astrophysics Data System (ADS)

Cullen, D. C.; Grant, W. D.; Piletsky, S.; Sims, M. R.

2001-08-01

A key objective of future astrobiology lander missions, e.g. to Mars and Europa, is the detection of biomarkers - molecules whose presence indicates the existence of either current or extinct life. To address limitations of current analytical methods for biomarker detection, we describe the methodology of a new project for demonstration of a robust molecular-recognition sensor array for astrobiology biomarkers. The sensor array will be realised by assembling components that have been demonstrated individually in previous or current research projects. The major components are (1) robust artificial molecular receptors comprised of molecular imprinted polymer (MIP) recognition systems and (2) a sensor array comprised of both optical and electrochemical sensor elements. These components will be integrated together using ink-jet printing technology coupled with in situ photo-polymerisation of MIPs. For demonstration, four model biomarkers are chosen as targets and represent various classes of potential biomarkers. Objectives of the proposed work include (1) demonstration of practical proof-of-concept, (2) identify areas for further development and (3) provide performance and design data for follow-up projects leading to astrobiology missions.

Spectroscopy Made Easy: Evolution

NASA Astrophysics Data System (ADS)

Piskunov, Nikolai; Valenti, Jeff A.

2017-01-01

Context. The Spectroscopy Made Easy (SME) package has become a popular tool for analyzing stellar spectra, often in connection with large surveys or exoplanet research. SME has evolved significantly since it was first described in 1996, but many of the original caveats and potholes still haunt users. The main drivers for this paper are complexity of the modeling task, the large user community, and the massive effort that has gone into SME. Aims: We do not intend to give a comprehensive introduction to stellar atmospheres, but will describe changes to key components of SME: the equation of state, opacities, and radiative transfer. We will describe the analysis and fitting procedure and investigate various error sources that affect inferred parameters. Methods: We review the current status of SME, emphasizing new algorithms and methods. We describe some best practices for using the package, based on lessons learned over two decades of SME usage. We present a new way to assess uncertainties in derived stellar parameters. Results: Improvements made to SME, better line data, and new model atmospheres yield more realistic stellar spectra, but in many cases systematic errors still dominate over measurement uncertainty. Future enhancements are outlined.

Design automation for integrated nonlinear logic circuits (Conference Presentation)

NASA Astrophysics Data System (ADS)

Van Vaerenbergh, Thomas; Pelc, Jason; Santori, Charles; Bose, Ranojoy; Kielpinski, Dave; Beausoleil, Raymond G.

2016-05-01

A key enabler of the IT revolution of the late 20th century was the development of electronic design automation (EDA) tools allowing engineers to manage the complexity of electronic circuits with transistor counts now reaching into the billions. Recently, we have been developing large-scale nonlinear photonic integrated logic circuits for next generation all-optical information processing. At this time a sufficiently powerful EDA-style software tool chain to design this type of complex circuits does not yet exist. Here we describe a hierarchical approach to automating the design and validation of photonic integrated circuits, which can scale to several orders of magnitude higher complexity than the state of the art. Most photonic integrated circuits developed today consist of a small number of components, and only limited hierarchy. For example, a simple photonic transceiver may contain on the order of 10 building-block components, consisting of grating couplers for photonic I/O, modulators, and signal splitters/combiners. Because this is relatively easy to lay out by hand (or simple script) existing photonic design tools have relatively little automation in comparison to electronics tools. But demonstrating all-optical logic will require significantly more complex photonic circuits containing up to 1,000 components, hence becoming infeasible to design manually. Our design framework is based off Python-based software from Luceda Photonics which provides an environment to describe components, simulate their behavior, and export design files (GDS) to foundries for fabrication. At a fundamental level, a photonic component is described as a parametric cell (PCell) similarly to electronics design. PCells are described by geometric characteristics of their layout. A critical part of the design framework is the implementation of PCells as Python objects. PCell objects can then use inheritance to simplify design, and hierarchical designs can be made by creating composite PCells (modules) which consist of primitive building-block PCells (components). To automatically produce layouts, we built on a construct provided by Luceda called a PlaceAndAutoRoute cell: we create a module component by supplying a list of child cells, and a list of the desired connections between the cells (e.g. the out0 port of a microring is connected to a grating coupler). This functionality allowed us to write algorithms to automatically lay out the components: for instance, by laying out the first component and walking through the list of connections to check to see if the next component is already placed or not. The placement and orientation of the new component is determined by minimizing the length of a connecting waveguide. Our photonic circuits also utilize electrical signals to tune the photonic elements (setting propagation phases or microring resonant frequencies via thermo-optical tuning): the algorithm also routes the contacts for the metal heaters to contact pads at the edge of the circuit being designed where it can be contacted by electrical probes. We are currently validating a test run fabricated over the summer, and will use detailed characterization results to prepare our final design cycle in which we aim to demonstrate complex operational logic circuits containing ~50-100 nonlinear resonators.

Drug discrimination under two concurrent fixed-interval fixed-interval schedules.

PubMed

McMillan, D E; Li, M

2000-07-01

Pigeons were trained to discriminate 5.0 mg/kg pentobarbital from saline under a two-key concurrent fixed-interval (FI) 100-s FI 200-s schedule of food presentation, and later tinder a concurrent FI 40-s FI 80-s schedule, in which the FI component with the shorter time requirement reinforced responding on one key after drug administration (pentobarbital-biased key) and on the other key after saline administration (saline-biased key). After responding stabilized under the concurrent FI 100-s FI 200-s schedule, pigeons earned an average of 66% (after pentobarbital) to 68% (after saline) of their reinforcers for responding under the FI 100-s component of the concurrent schedule. These birds made an average of 70% of their responses on both the pentobarbital-biased key after the training dose of pentobarbital and the saline-biased key after saline. After responding stabilized under the concurrent FI 40-s FI 80-s schedule, pigeons earned an average of 67% of their reinforcers for responding under the FI 40 component after both saline and the training dose of pentobarbital. These birds made an average of 75% of their responses on the pentobarbital-biased key after the training dose of pentobarbital, but only 55% of their responses on the saline-biased key after saline. In test sessions preceded by doses of pentobarbital, chlordiazepoxide, ethanol, phencyclidine, or methamphetamine, the dose-response curves were similar under these two concurrent schedules. Pentobarbital, chlordiazepoxide, and ethanol produced dose-dependent increases in responding on the pentobarbital-biased key as the doses increased. For some birds, at the highest doses of these drugs, the dose-response curve turned over. Increasing doses of phencyclidine produced increased responding on the pentobarbital-biased key in some, but not all, birds. After methamphetamine, responding was largely confined to the saline-biased key. These data show that pigeons can perform drug discriminations under concurrent schedules in which the reinforcement frequency under the schedule components differs only by a factor of two, and that when other drugs are substituted for the training drugs they produce dose-response curves similar to the curves produced by these drugs under other concurrent interval schedules.

Biologically Inspired Model for Visual Cognition Achieving Unsupervised Episodic and Semantic Feature Learning.

PubMed

Qiao, Hong; Li, Yinlin; Li, Fengfu; Xi, Xuanyang; Wu, Wei

2016-10-01

Recently, many biologically inspired visual computational models have been proposed. The design of these models follows the related biological mechanisms and structures, and these models provide new solutions for visual recognition tasks. In this paper, based on the recent biological evidence, we propose a framework to mimic the active and dynamic learning and recognition process of the primate visual cortex. From principle point of view, the main contributions are that the framework can achieve unsupervised learning of episodic features (including key components and their spatial relations) and semantic features (semantic descriptions of the key components), which support higher level cognition of an object. From performance point of view, the advantages of the framework are as follows: 1) learning episodic features without supervision-for a class of objects without a prior knowledge, the key components, their spatial relations and cover regions can be learned automatically through a deep neural network (DNN); 2) learning semantic features based on episodic features-within the cover regions of the key components, the semantic geometrical values of these components can be computed based on contour detection; 3) forming the general knowledge of a class of objects-the general knowledge of a class of objects can be formed, mainly including the key components, their spatial relations and average semantic values, which is a concise description of the class; and 4) achieving higher level cognition and dynamic updating-for a test image, the model can achieve classification and subclass semantic descriptions. And the test samples with high confidence are selected to dynamically update the whole model. Experiments are conducted on face images, and a good performance is achieved in each layer of the DNN and the semantic description learning process. Furthermore, the model can be generalized to recognition tasks of other objects with learning ability.

78 FR 3081 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Toyota

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... receiver, electrical key and an electronic control module (ECM). The conventional key components consist of a transponder key ECU assembly, transponder key coil, security indicator, ignition key and an ECM... certification ECU and steering lock ECU receive confirmation of the valid key, allowing the ECM to start the...

A computational framework for modeling targets as complex adaptive systems

NASA Astrophysics Data System (ADS)

Santos, Eugene; Santos, Eunice E.; Korah, John; Murugappan, Vairavan; Subramanian, Suresh

2017-05-01

Modeling large military targets is a challenge as they can be complex systems encompassing myriad combinations of human, technological, and social elements that interact, leading to complex behaviors. Moreover, such targets have multiple components and structures, extending across multiple spatial and temporal scales, and are in a state of change, either in response to events in the environment or changes within the system. Complex adaptive system (CAS) theory can help in capturing the dynamism, interactions, and more importantly various emergent behaviors, displayed by the targets. However, a key stumbling block is incorporating information from various intelligence, surveillance and reconnaissance (ISR) sources, while dealing with the inherent uncertainty, incompleteness and time criticality of real world information. To overcome these challenges, we present a probabilistic reasoning network based framework called complex adaptive Bayesian Knowledge Base (caBKB). caBKB is a rigorous, overarching and axiomatic framework that models two key processes, namely information aggregation and information composition. While information aggregation deals with the union, merger and concatenation of information and takes into account issues such as source reliability and information inconsistencies, information composition focuses on combining information components where such components may have well defined operations. Since caBKBs can explicitly model the relationships between information pieces at various scales, it provides unique capabilities such as the ability to de-aggregate and de-compose information for detailed analysis. Using a scenario from the Network Centric Operations (NCO) domain, we will describe how our framework can be used for modeling targets with a focus on methodologies for quantifying NCO performance metrics.

Combinations of Response-Dependent and Response-Independent Schedule-Correlated Stimulus Presentation in an Observing Procedure

ERIC Educational Resources Information Center

DeFulio, Anthony; Hackenberg, Timothy D.

2008-01-01

Pigeons pecked a response key on a variable-interval (VI) schedule, in which responses produced food every 40 s, on average. These VI periods, or components, alternated in irregular fashion with extinction components in which food was unavailable. Pecks on a second (observing) key briefly produced exteroceptive stimuli (houselight flashes)…

Ion implantation and diamond-like coatings of aluminum alloys

NASA Astrophysics Data System (ADS)

Malaczynski, G. W.; Hamdi, A. H.; Elmoursi, A. A.; Qiu, X.

1997-04-01

In an attempt to increase the wear resistance of some key automotive components, General Motors Research and Development Center initiated a study to determine the potential of surface modification as a means of improving the tribological properties of automotive parts, and to investigate the feasibility of mass producing such parts. This paper describes the plasma immersion ion implantation system that was designed for the study of various options for surface treatment, and it discusses bench testing procedures used for evaluating the surface-treated samples. In particular, both tribological and microstructural analyses are discussed for nitrogen implants and diamond-like hydrocarbon coatings of some aluminum alloys.

Antimalarial peroxide dyads from natural artemisinin and hydroxyalkylated 1,2,4-trioxanes.

PubMed

Griesbeck, Axel G; Neudörfl, Jörg; Hörauf, Achim; Specht, Sabine; Raabe, Angela

2009-05-28

Three synthetic approaches to highly antimalarial peroxide dyads that are composed of the natural artemisinin part (either as dihydroartemisinin or artesunic acid components) and synthetic 1,2,4-trioxanes linked by ether or ester bridges are described. Photooxygenation is the key step to introduce the trioxane group initially or at the end of the reaction sequence, respectively. Dihydroartemisinin or artesunate coupling to hydroxyethyltrioxanes are the two processes that use intact peroxide units from the beginning, whereas the dihydroartemisinin-coupling to an allylic alcohol is a postphotooxygenation route, where the second trioxane ring is installed in the last step of the procedure.

Preparing a scientific manuscript in Linux: Today's possibilities and limitations.

PubMed

Tchantchaleishvili, Vakhtang; Schmitto, Jan D

2011-10-22

Increasing number of scientists are enthusiastic about using free, open source software for their research purposes. Authors' specific goal was to examine whether a Linux-based operating system with open source software packages would allow to prepare a submission-ready scientific manuscript without the need to use the proprietary software. Preparation and editing of scientific manuscripts is possible using Linux and open source software. This letter to the editor describes key steps for preparation of a publication-ready scientific manuscript in a Linux-based operating system, as well as discusses the necessary software components. This manuscript was created using Linux and open source programs for Linux.

MOEMs-based new functionalities for future instrumentation in space

NASA Astrophysics Data System (ADS)

Zamkotsian, Frédéric; Liotard, Arnaud; Viard, Thierry; Costes, Vincent; Hébert, Philippe-Jean; Hinglais, Emmanuel; Villenave, Michel

2017-11-01

Micro-Opto-Electro-Mechanical Systems (MOEMS) could be key components in future generation of space instruments. In Earth Observation, Universe Observation and Planet Exploration, scientific return of the instruments must be optimized in future missions. MOEMS devices are based on the mature micro-electronics technology and in addition to their compactness, scalability, and specific task customization, they could generate new functions not available with current technologies. CNES has initiated a study with LAM and TAS for listing the new functions associated with several types of MEMS (programmable slits, programmable micro-diffraction gratings, micro-deformable mirrors). Instrumental applications are then derived and promising concepts are described.

Automatic Generation of Test Oracles - From Pilot Studies to Application

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Smith, Ben

1998-01-01

There is a trend towards the increased use of automation in V&V. Automation can yield savings in time and effort. For critical systems, where thorough V&V is required, these savings can be substantial. We describe a progression from pilot studies to development and use of V&V automation. We used pilot studies to ascertain opportunities for, and suitability of, automating various analyses whose results would contribute to V&V. These studies culminated in the development of an automatic generator of automated test oracles. This was then applied and extended in the course of testing an Al planning system that is a key component of an autonomous spacecraft.

Crew systems: integrating human and technical subsystems for the exploration of space.

PubMed

Connors, M M; Harrison, A A; Summit, J

1994-07-01

Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

Crew systems: integrating human and technical subsystems for the exploration of space

NASA Technical Reports Server (NTRS)

Connors, M. M.; Harrison, A. A.; Summit, J.

1994-01-01

Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

Rapid assessment of water pollution by airborne measurement of chlorophyll content.

NASA Technical Reports Server (NTRS)

Arvesen, J. C.; Weaver, E. C.; Millard, J. P.

1971-01-01

Present techniques of airborne chlorophyll measurement are discussed as an approach to water pollution assessment. The differential radiometer, the chlorophyll correlation radiometer, and an infrared radiometer for water temperature measurements are described as the key components of the equipment. Also covered are flight missions carried out to evaluate the capability of the chlorophyll correlation radiometer in measuring the chlorophyll content in water bodies with widely different levels of nutrients, such as fresh-water lakes of high and low eutrophic levels, marine waters of high and low productivity, and an estuary with a high sediment content. The feasibility and usefulness of these techniques are indicated.

Reconstruction software of the silicon tracker of DAMPE mission

NASA Astrophysics Data System (ADS)

Tykhonov, A.; Gallo, V.; Wu, X.; Zimmer, S.

2017-10-01

DAMPE is a satellite-borne experiment aimed to probe astroparticle physics in the GeV-TeV energy range. The Silicon tracker (STK) is one of the key components of DAMPE, which allows the reconstruction of trajectories (tracks) of detected particles. The non-negligible amount of material in the tracker poses a challenge to its reconstruction and alignment. In this paper we describe methods to address this challenge. We present the track reconstruction algorithm and give insight into the alignment algorithm. We also present our CAD-to-GDML converter, an in-house tool for implementing detector geometry in the software from the CAD drawings of the detector.

Laser system development for gravitational-wave interferometry in space

NASA Astrophysics Data System (ADS)

Numata, Kenji; Yu, Anthony W.; Camp, Jordan B.; Krainak, Michael A.

2018-02-01

A highly stable and robust laser system is a key component of the space-based Laser Interferometer Space Antenna (LISA) mission, which is designed to detect gravitational waves from various astronomical sources. The baseline architecture for the LISA laser consists of a low-power, low-noise Nd:YAG non-planar ring oscillator (NPRO) followed by a diode-pumped Yb-fiber amplifier with 2 W output. We are developing such laser system at the NASA Goddard Space Flight Center (GSFC), as well as investigating other laser options. In this paper, we will describe our progress to date and plans to demonstrate a technology readiness level (TRL) 6 LISA laser system.

Parameter Estimation for Viscoplastic Material Modeling

NASA Technical Reports Server (NTRS)

Saleeb, Atef F.; Gendy, Atef S.; Wilt, Thomas E.

1997-01-01

A key ingredient in the design of engineering components and structures under general thermomechanical loading is the use of mathematical constitutive models (e.g. in finite element analysis) capable of accurate representation of short and long term stress/deformation responses. In addition to the ever-increasing complexity of recent viscoplastic models of this type, they often also require a large number of material constants to describe a host of (anticipated) physical phenomena and complicated deformation mechanisms. In turn, the experimental characterization of these material parameters constitutes the major factor in the successful and effective utilization of any given constitutive model; i.e., the problem of constitutive parameter estimation from experimental measurements.

Design, synthesis, and characterization of fluorine-free PAGs for 193-nm lithography

NASA Astrophysics Data System (ADS)

Liu, Sen; Glodde, Martin; Varanasi, Pushkara R.

2010-04-01

Photoacid generators (PAGs) are a key component in chemically amplified resists used in photolithography. Perfluorooctanesulfonates (PFOS) and other perfluoroalkylsulfonates (PFAS) have been well adopted as PAGs in 193 nm photoresist. Recently, concerns have been raised about their environmental impact due to their chemical persistency, bioaccumulation and toxicity. It is a general interest to find environmentally benign PAGs that are free of fluorine atoms. Here we describe the design, synthesis and characterization of a series of novel fluorine-free onium salts as PAGs for 193 nm photoresists. These PAGs demonstrated desirable physical and lithography properties when compared with PFAS-based PAGs for both dry and immersion exposures.

An Agenda for Improving Perioperative Code Status Discussion.

PubMed

Hickey, Thomas R; Cooper, Zara; Urman, Richard D; Hepner, David L; Bader, Angela M

2016-06-15

Code status discussions (CSDs) clarify patient preferences for cardiopulmonary resuscitation in the event of cardiac or respiratory arrest. CSDs are a key component of perioperative care, particularly at the end of life, and must be both patient-centered and shared. Physicians at all levels of training are insufficiently trained in and inappropriately perform CSD; this may be particularly true of perioperative physicians. In this article, we describe the difficulty of achieving a patient-centered, shared perioperative CSD in the case of a medical professional with a do-not-resuscitate order. We provide a brief background in cardiopulmonary resuscitation, do-not-resuscitate, and CSD before proposing an agenda for improving perioperative CSD.

The professional voice.

PubMed

Benninger, M S

2011-02-01

The human voice is not only the key to human communication but also serves as the primary musical instrument. Many professions rely on the voice, but the most noticeable and visible are singers. Care of the performing voice requires a thorough understanding of the interaction between the anatomy and physiology of voice production, along with an awareness of the interrelationships between vocalisation, acoustic science and non-vocal components of performance. This review gives an overview of the care and prevention of professional voice disorders by describing the unique and integrated anatomy and physiology of singing, the roles of development and training, and the importance of the voice care team.

On architecting and composing engineering information services to enable smart manufacturing

PubMed Central

Ivezic, Nenad; Srinivasan, Vijay

2016-01-01

Engineering information systems play an important role in the current era of digitization of manufacturing, which is a key component to enable smart manufacturing. Traditionally, these engineering information systems spanned the lifecycle of a product by providing interoperability of software subsystems through a combination of open and proprietary exchange of data. But research and development efforts are underway to replace this paradigm with engineering information services that can be composed dynamically to meet changing needs in the operation of smart manufacturing systems. This paper describes the opportunities and challenges in architecting such engineering information services and composing them to enable smarter manufacturing. PMID:27840595

Energy Conversion in Natural and Artificial Photosynthesis

PubMed Central

McConnell, Iain; Li, Gonghu; Brudvig, Gary W.

2010-01-01

Summary Modern civilization is dependent upon fossil fuels, a nonrenewable energy source originally provided by the storage of solar energy. Fossil fuel dependence has severe consequences including energy security issues and greenhouse gas emissions. The consequences of fossil fuel dependence could be avoided by fuel-producing artificial systems that mimic natural photosynthesis, directly converting solar energy to fuel. This review describes the three key components of solar energy conversion in photosynthesis: light harvesting, charge separation, and catalysis. These processes are compared in natural and artificial systems. Such a comparison can assist in understanding the general principles of photosynthesis and in developing working devices including photoelectrochemical cells for solar energy conversion. PMID:20534342

Exhaust gas oxygen sensors

NASA Astrophysics Data System (ADS)

Hetrick, Robert E.; Hohnke, D. K.; Logothetis, E. M.

1981-01-01

Ceramic ZrO2, TiO2 and related oxides with suitable O2-sensitive electrical properties have found important applications in devices for measuring exhaust-gas O2 concentration. For example, such devices are key components in feedback control systems that would maintain the intake air-to-fuel ratio near the stoichiometric value where regulated emissions can be minimized. The physical principles underlying the operation of ZrO2 based O2-concentration cells and TiO2-based resistive devices for the stoichiometric application are described. Finally, a device based on electrochemical O2 pumping is discussed which may be useful for A/F control in the fuel-efficient lean region.

Sensor supervision and multiagent commanding by means of projective virtual reality

NASA Astrophysics Data System (ADS)

Rossmann, Juergen

1998-10-01

When autonomous systems with multiple agents are considered, conventional control- and supervision technologies are often inadequate because the amount of information available is often presented in a way that the user is effectively overwhelmed by the displayed data. New virtual reality (VR) techniques can help to cope with this problem, because VR offers the chance to convey information in an intuitive manner and can combine supervision capabilities and new, intuitive approaches to the control of autonomous systems. In the approach taken, control and supervision issues were equally stressed and finally led to the new ideas and the general framework for Projective Virtual Reality. The key idea of this new approach for an intuitively operable man machine interface for decentrally controlled multi-agent systems is to let the user act in the virtual world, detect the changes and have an action planning component automatically generate task descriptions for the agents involved to project actions that have been carried out by users in the virtual world into the physical world, e.g. with the help of robots. Thus the Projective Virtual Reality approach is to split the job between the task deduction in the VR and the task `projection' onto the physical automation components by the automatic action planning component. Besides describing the realized projective virtual reality system, the paper will also describe in detail the metaphors and visualization aids used to present different types of (e.g. sensor-) information in an intuitively comprehensible manner.

Improved Dynamic Modeling of the Cascade Distillation Subsystem and Integration with Models of Other Water Recovery Subsystems

NASA Technical Reports Server (NTRS)

Perry, Bruce; Anderson, Molly

2015-01-01

The Cascade Distillation Subsystem (CDS) is a rotary multistage distiller being developed to serve as the primary processor for wastewater recovery during long-duration space missions. The CDS could be integrated with a system similar to the International Space Station (ISS) Water Processor Assembly (WPA) to form a complete Water Recovery System (WRS) for future missions. Independent chemical process simulations with varying levels of detail have previously been developed using Aspen Custom Modeler (ACM) to aid in the analysis of the CDS and several WPA components. The existing CDS simulation could not model behavior during thermal startup and lacked detailed analysis of several key internal processes, including heat transfer between stages. The first part of this paper describes modifications to the ACM model of the CDS that improve its capabilities and the accuracy of its predictions. Notably, the modified version of the model can accurately predict behavior during thermal startup for both NaCl solution and pretreated urine feeds. The model is used to predict how changing operating parameters and design features of the CDS affects its performance, and conclusions from these predictions are discussed. The second part of this paper describes the integration of the modified CDS model and the existing WPA component models into a single WRS model. The integrated model is used to demonstrate the effects that changes to one component can have on the dynamic behavior of the system as a whole.

Development of an optimised key worker framework for people with dementia, their family and caring unit living in the community.

PubMed

Renehan, Emma; Goeman, Dianne; Koch, Susan

2017-07-20

In Australia, dementia is a national health priority. With the rising number of people living with dementia and shortage of formal and informal carers predicted in the near future, developing approaches to coordinating services in quality-focused ways is considered an urgent priority. Key worker support models are one approach that have been used to assist people living with dementia and their caring unit coordinate services and navigate service systems; however, there is limited literature outlining comprehensive frameworks for the implementation of community dementia key worker roles in practice. In this paper an optimised key worker framework for people with dementia, their family and caring unit living in the community is developed and presented. A number of processes were undertaken to inform the development of a co-designed optimised key worker framework: an expert working and reference group; a systematic review of the literature; and a qualitative evaluation of 14 dementia key worker models operating in Australia involving 14 interviews with organisation managers, 19 with key workers and 15 with people living with dementia and/or their caring unit. Data from the systematic review and evaluation of dementia key worker models were analysed by the researchers and the expert working and reference group using a constant comparative approach to define the essential components of the optimised framework. The developed framework consisted of four main components: overarching philosophies; organisational context; role definition; and key worker competencies. A number of more clearly defined sub-themes sat under each component. Reflected in the framework is the complexity of the dementia journey and the difficulty in trying to develop a 'one size fits all' approach. This co-designed study led to the development of an evidence based framework which outlines a comprehensive synthesis of components viewed as being essential to the implementation of a dementia key worker model of care in the community. The framework was informed and endorsed by people living with dementia and their caring unit, key workers, managers, Australian industry experts, policy makers and researchers. An evaluation of its effectiveness and relevance for practice within the dementia care space is required.

Development of a Universal Waste Management System

NASA Technical Reports Server (NTRS)

Stapleton, Thomas J.; Baccus, Shelley; Broyan, James L., Jr.

2013-01-01

NASA is working with a number of commercial companies to develop the next low Earth orbit spacecraft. The hardware volume and weight constraints are similar to or greater than those of the Apollo era. This, coupled with the equally demanding cost challenge of the proposed commercial vehicles, causes much of the Environmental Control and Life Support System (ECLSS) designs to be reconsidered. The Waste Collection System (WCS) is within this group of ECLSS hardware. The development to support this new initiative is discussed within. A WCS concept - intended to be common for all the vehicle platforms currently on the drawing board - is being developed. The new concept, referred to as the Universal Waste Management System (UWMS), includes favorable features from previous designs while improving on other areas on previous Space Shuttle and the existing International Space Station (ISS) WCS hardware, as needed. The intent is to build a commode that requires less crew time, improved cleanliness, and a 75% reduction in volume and weight compared to the previous US ISS/Extended Duration Orbitor WCS developed in the 1990s. The UWMS is most similar to the ISS Development Test Objective (DTO) WCS design. It is understood that the most dramatic cost reduction opportunity occurs at the beginning of the design process. To realize this opportunity, the cost of each similar component between the UWMS and the DTO WCS was determined. The comparison outlined were the design changes that would result with the greatest impact. The changes resulted in simplifying the approach or eliminating components completely. This initial UWMS paper will describe the system layout approach and a few key features of major components. Future papers will describe the UWMS functionality, test results, and components as they are developed.

What is kangaroo mother care? Systematic review of the literature

PubMed Central

Chan, Grace J; Valsangkar, Bina; Kajeepeta, Sandhya; Boundy, Ellen O; Wall, Stephen

2016-01-01

Background Kangaroo mother care (KMC), often defined as skin–to–skin contact between a mother and her newborn, frequent or exclusive breastfeeding, and early discharge from the hospital has been effective in reducing the risk of mortality among preterm and low birth weight infants. Research studies and program implementation of KMC have used various definitions. Objectives To describe the current definitions of KMC in various settings, analyze the presence or absence of KMC components in each definition, and present a core definition of KMC based on common components that are present in KMC literature. Methods We conducted a systematic review and searched PubMed, Embase, Scopus, Web of Science, and the World Health Organization Regional Databases for studies with key words “kangaroo mother care”, “kangaroo care” or “skin to skin care” from 1 January 1960 to 24 April 2014. Two independent reviewers screened articles and abstracted data. Findings We screened 1035 articles and reports; 299 contained data on KMC and neonatal outcomes or qualitative information on KMC implementation. Eighty–eight of the studies (29%) did not define KMC. Two hundred and eleven studies (71%) included skin–to–skin contact (SSC) in their KMC definition, 49 (16%) included exclusive or nearly exclusive breastfeeding, 22 (7%) included early discharge criteria, and 36 (12%) included follow–up after discharge. One hundred and sixty–seven studies (56%) described the duration of SSC. Conclusions There exists significant heterogeneity in the definition of KMC. A large number of studies did not report definitions of KMC. Skin–to–skin contact is the core component of KMC, whereas components such as breastfeeding, early discharge, and follow–up care are context specific. To implement KMC effectively development of a global standardized definition of KMC is needed. PMID:27231546

What is kangaroo mother care? Systematic review of the literature.

PubMed

Chan, Grace J; Valsangkar, Bina; Kajeepeta, Sandhya; Boundy, Ellen O; Wall, Stephen

2016-06-01

Kangaroo mother care (KMC), often defined as skin-to-skin contact between a mother and her newborn, frequent or exclusive breastfeeding, and early discharge from the hospital has been effective in reducing the risk of mortality among preterm and low birth weight infants. Research studies and program implementation of KMC have used various definitions. To describe the current definitions of KMC in various settings, analyze the presence or absence of KMC components in each definition, and present a core definition of KMC based on common components that are present in KMC literature. We conducted a systematic review and searched PubMed, Embase, Scopus, Web of Science, and the World Health Organization Regional Databases for studies with key words "kangaroo mother care", "kangaroo care" or "skin to skin care" from 1 January 1960 to 24 April 2014. Two independent reviewers screened articles and abstracted data. We screened 1035 articles and reports; 299 contained data on KMC and neonatal outcomes or qualitative information on KMC implementation. Eighty-eight of the studies (29%) did not define KMC. Two hundred and eleven studies (71%) included skin-to-skin contact (SSC) in their KMC definition, 49 (16%) included exclusive or nearly exclusive breastfeeding, 22 (7%) included early discharge criteria, and 36 (12%) included follow-up after discharge. One hundred and sixty-seven studies (56%) described the duration of SSC. There exists significant heterogeneity in the definition of KMC. A large number of studies did not report definitions of KMC. Skin-to-skin contact is the core component of KMC, whereas components such as breastfeeding, early discharge, and follow-up care are context specific. To implement KMC effectively development of a global standardized definition of KMC is needed.

Analyzer-based phase-contrast imaging system using a micro focus x-ray source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Wei; Majidi, Keivan; Brankov, Jovan G., E-mail: brankov@iit.edu

2014-08-15

Here we describe a new in-laboratory analyzer based phase contrast-imaging (ABI) instrument using a conventional X-ray tube source (CXS) aimed at bio-medical imaging applications. Phase contrast-imaging allows visualization of soft tissue details usually obscured in conventional X-ray imaging. The ABI system design and major features are described in detail. The key advantage of the presented system, over the few existing CXS ABI systems, is that it does not require high precision components, i.e., CXS, X-ray detector, and electro-mechanical components. To overcome a main problem introduced by these components, identified as temperature stability, the system components are kept at a constantmore » temperature inside of three enclosures, thus minimizing the electrical and mechanical thermal drifts. This is achieved by using thermoelectric (Peltier) cooling/heating modules that are easy to control precisely. For CXS we utilized a microfocus X-ray source with tungsten (W) anode material. In addition the proposed system eliminates tungsten's multiple spectral lines by selecting monochromator crystal size appropriately therefore eliminating need for the costly mismatched, two-crystal monochromator. The system imaging was fine-tuned for tungsten Kα{sub 1} line with the energy of 59.3 keV since it has been shown to be of great clinical significance by a number of researchers at synchrotron facilities. In this way a laboratory system that can be used for evaluating and quantifying tissue properties, initially explored at synchrotron facilities, would be of great interest to a larger research community. To demonstrate the imaging capability of our instrument we use a chicken thigh tissue sample.« less

Electronic Voting Protocol Using Identity-Based Cryptography.

PubMed

Gallegos-Garcia, Gina; Tapia-Recillas, Horacio

2015-01-01

Electronic voting protocols proposed to date meet their properties based on Public Key Cryptography (PKC), which offers high flexibility through key agreement protocols and authentication mechanisms. However, when PKC is used, it is necessary to implement Certification Authority (CA) to provide certificates which bind public keys to entities and enable verification of such public key bindings. Consequently, the components of the protocol increase notably. An alternative is to use Identity-Based Encryption (IBE). With this kind of cryptography, it is possible to have all the benefits offered by PKC, without neither the need of certificates nor all the core components of a Public Key Infrastructure (PKI). Considering the aforementioned, in this paper we propose an electronic voting protocol, which meets the privacy and robustness properties by using bilinear maps.

Electronic Voting Protocol Using Identity-Based Cryptography

PubMed Central

Gallegos-Garcia, Gina; Tapia-Recillas, Horacio

2015-01-01

Electronic voting protocols proposed to date meet their properties based on Public Key Cryptography (PKC), which offers high flexibility through key agreement protocols and authentication mechanisms. However, when PKC is used, it is necessary to implement Certification Authority (CA) to provide certificates which bind public keys to entities and enable verification of such public key bindings. Consequently, the components of the protocol increase notably. An alternative is to use Identity-Based Encryption (IBE). With this kind of cryptography, it is possible to have all the benefits offered by PKC, without neither the need of certificates nor all the core components of a Public Key Infrastructure (PKI). Considering the aforementioned, in this paper we propose an electronic voting protocol, which meets the privacy and robustness properties by using bilinear maps. PMID:26090515

Innovative Educational Restructuring for America 2000: Time To Bury Political Bureaucracies and Begin Systematic Assessment, Profiling & Technological Improvement of School Organizations.

ERIC Educational Resources Information Center

Packard, Richard D.; Dereshiwsky, Mary I.

Despite current interest with the concept of the "New American School" model discussed in "America 2000," school systems continue to approach educational reform and restructuring by tinkering with key organizational components in isolation. The total school organization requires assessment and profiling to determine which key components are drags…

[Testing method research for key performance indicator of imaging acousto-optic tunable filter (AOTF)].

PubMed

Hu, Shan-Zhou; Chen, Fen-Fei; Zeng, Li-Bo; Wu, Qiong-Shui

2013-01-01

Imaging AOTF is an important optical filter component for new spectral imaging instruments developed in recent years. The principle of imaging AOTF component was demonstrated, and a set of testing methods for some key performances were studied, such as diffraction efficiency, wavelength shift with temperature, homogeneity in space for diffraction efficiency, imaging shift, etc.

Does grazing of cover crops impact biologically active soil C and N fractions under inversion and no tillage management

USDA-ARS?s Scientific Manuscript database

Cover crops are a key component of conservation cropping systems. They can also be a key component of integrated crop-livestock systems by offering high-quality forage during short periods between cash crops. The impact of cattle grazing on biologically active soil C and N fractions has not receiv...

Gender-Mainstreaming in Technical and Vocational Education and Training

NASA Astrophysics Data System (ADS)

Nurhaeni, I. D. A.; Kurniawan, Y.

2018-02-01

Gender differences should be considered in vocational high schools so women and men can develop their potentials without being inhibited by gender bias. Gender mainstreaming in vocational high schools is a strategy to integrate gender differences at all stages in teaching-learning process for achieving gender equality and equity. This research evaluates the implementation of gender mainstreaming in vocational high schools consisting of seven key components of gender mainstreaming. Four vocational high schools in Sragen Regency Indonesia have been purposively selected. The data were obtained through in-depth interviews and documentation studies. The data were analyzed using Kabeer’s model of gender analysis. The findings show that not all key components of gender mainstreaming have been implemented in vocational high schools. Most vocational high schools have implemented three of seven key components of gender mainstreaming, namely political will and leadership, policy framework and gender statistics. Meanwhile four of seven key components of gender mainstreaming, namely structure and mechanism, resources, infra structures and civil society have not been well-implemented. In conclusion gender mainstreaming has not been implemented effectively in vocational high schools. Accordingly, the government’s education office should continue to encourage and publish guidelines on the implementation of gender-mainstreaming in vocational high schools.

Interpreting beta-diversity components over time to conserve metacommunities in highly dynamic ecosystems.

PubMed

Ruhí, Albert; Datry, Thibault; Sabo, John L

2017-12-01

The concept of metacommunity (i.e., a set of local communities linked by dispersal) has gained great popularity among community ecologists. However, metacommunity research mostly addresses questions on spatial patterns of biodiversity at the regional scale, whereas conservation planning requires quantifying temporal variation in those metacommunities and the contributions that individual (local) sites make to regional dynamics. We propose that recent advances in diversity-partitioning methods may allow for a better understanding of metacommunity dynamics and the identification of keystone sites. We used time series of the 2 components of beta diversity (richness and replacement) and the contributions of local sites to these components to examine which sites controlled source-sink dynamics in a highly dynamic model system (an intermittent river). The relative importance of the richness and replacement components of beta diversity fluctuated over time, and sample aggregation led to underestimation of beta diversity by up to 35%. Our literature review revealed that research on intermittent rivers would benefit greatly from examination of beta-diversity components over time. Adequately appraising spatiotemporal variability in community composition and identifying sites that are pivotal for maintaining biodiversity at the landscape scale are key needs for conservation prioritization and planning. Thus, our framework may be used to guide conservation actions in highly dynamic ecosystems when time-series data describing biodiversity across sites connected by dispersal are available. © 2017 Society for Conservation Biology.

GOMMA: a component-based infrastructure for managing and analyzing life science ontologies and their evolution

PubMed Central

2011-01-01

Background Ontologies are increasingly used to structure and semantically describe entities of domains, such as genes and proteins in life sciences. Their increasing size and the high frequency of updates resulting in a large set of ontology versions necessitates efficient management and analysis of this data. Results We present GOMMA, a generic infrastructure for managing and analyzing life science ontologies and their evolution. GOMMA utilizes a generic repository to uniformly and efficiently manage ontology versions and different kinds of mappings. Furthermore, it provides components for ontology matching, and determining evolutionary ontology changes. These components are used by analysis tools, such as the Ontology Evolution Explorer (OnEX) and the detection of unstable ontology regions. We introduce the component-based infrastructure and show analysis results for selected components and life science applications. GOMMA is available at http://dbs.uni-leipzig.de/GOMMA. Conclusions GOMMA provides a comprehensive and scalable infrastructure to manage large life science ontologies and analyze their evolution. Key functions include a generic storage of ontology versions and mappings, support for ontology matching and determining ontology changes. The supported features for analyzing ontology changes are helpful to assess their impact on ontology-dependent applications such as for term enrichment. GOMMA complements OnEX by providing functionalities to manage various versions of mappings between two ontologies and allows combining different match approaches. PMID:21914205

[Epigenetics in atherosclerosis].

PubMed

Guardiola, Montse; Vallvé, Joan C; Zaina, Silvio; Ribalta, Josep

2016-01-01

The association studies based on candidate genes carried on for decades have helped in visualizing the influence of the genetic component in complex diseases such as atherosclerosis, also showing the interaction between different genes and environmental factors. Even with all the knowledge accumulated, there is still some way to go to decipher the individual predisposition to disease, and if we consider the great influence that environmental factors play in the development and progression of atherosclerosis, epigenetics is presented as a key element in trying to expand our knowledge on individual predisposition to atherosclerosis and cardiovascular disease. Epigenetics can be described as the discipline that studies the mechanisms of transcriptional regulation, independent of changes in the sequence of DNA, and mostly induced by environmental factors. This review aims to describe what epigenetics is and how epigenetic mechanisms are involved in atherosclerosis. Copyright © 2015 Sociedad Española de Arteriosclerosis. Published by Elsevier España. All rights reserved.

Practical Approaches to Evaluating Progress and Outcomes in Community-Wide Teen Pregnancy Prevention Initiatives.

PubMed

Tevendale, Heather D; Condron, D Susanne; Garraza, Lucas Godoy; House, L Duane; Romero, Lisa M; Brooks, Megan A M; Walrath, Christine

2017-03-01

This paper presents an overview of the key evaluation components for a set of community-wide teen pregnancy prevention initiatives. We first describe the performance measures selected to assess progress toward meeting short-term objectives on the reach and quality of implementation of evidence-based teen pregnancy prevention interventions and adolescent reproductive health services. Next, we describe an evaluation that will compare teen birth rates in intervention communities relative to synthetic control communities. Synthetic controls are developed via a data-driven technique that constructs control communities by combining information from a pool of communities that are similar to the intervention community. Finally, we share lessons learned thus far in the evaluation of the project, with a focus on those lessons that may be valuable for local communities evaluating efforts to reduce teen pregnancy. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Production and Distribution of Global Products From MODIS

NASA Technical Reports Server (NTRS)

Masuoka, Edward; Smith, David E. (Technical Monitor)

2000-01-01

The Moderate Resolution Imaging Spectroradiometer was launched on the EOS Terra spacecraft in December 1999 and will also fly on EOS Aqua in December 2000. With 36 spectral bands from the visible through thermal infrared and spatial resolution of 250m to 1 kilometer, each MODIS instrument will image the entire Earth surface in 2 days. This paper traces the flow of MODIS data products from the receipt of Level 0 data at the EDOS facility, through the production and quality assurance process to the Distributed Active Archive Centers (DAACs), which ship products to the user community. It describes where to obtain products and plans for reprocessing MODIS products. As most components of the ground system are severely limited in their capacity to distribute MODIS products, it also describes the key characteristics of MODIS products and their metadata that allow a user to optimize their selection of products given anticipate bottlenecks in distribution.

SSB as an organizer/mobilizer of genome maintenance complexes

PubMed Central

Shereda, Robert D.; Kozlov, Alexander G.; Lohman, Timothy M.; Cox, Michael M.; Keck, James L.

2008-01-01

When duplex DNA is altered in almost any way (replicated, recombined, or repaired), single strands of DNA are usually intermediates, and single-stranded DNA binding (SSB) proteins are present. These proteins have often been described as inert, protective DNA coatings. Continuing research is demonstrating a far more complex role of SSB that includes the organization and/or mobilization of all aspects of DNA metabolism. Escherichia coli SSB is now known to interact with at least 14 other proteins that include key components of the elaborate systems involved in every aspect of DNA metabolism. Most, if not all, of these interactions are mediated by the amphipathic C-terminus of SSB. In this review, we summarize the extent of the eubacterial SSB interaction network, describe the energetics of interactions with SSB, and highlight the roles of SSB in the process of recombination. Similar themes to those highlighted in this review are evident in all biological systems. PMID:18937104

Associative and sensorimotor cortico-basal ganglia circuit roles in effects of abused drugs.

PubMed

Gremel, C M; Lovinger, D M

2017-01-01

The mammalian forebrain is characterized by the presence of several parallel cortico-basal ganglia circuits that shape the learning and control of actions. Among these are the associative, limbic and sensorimotor circuits. The function of all of these circuits has now been implicated in responses to drugs of abuse, as well as drug seeking and drug taking. While the limbic circuit has been most widely examined, key roles for the other two circuits in control of goal-directed and habitual instrumental actions related to drugs of abuse have been shown. In this review we describe the three circuits and effects of acute and chronic drug exposure on circuit physiology. Our main emphasis is on drug actions in dorsal striatal components of the associative and sensorimotor circuits. We then review key findings that have implicated these circuits in drug seeking and taking behaviors, as well as drug use disorders. Finally, we consider different models describing how the three cortico-basal ganglia circuits become involved in drug-related behaviors. This topic has implications for drug use disorders and addiction, as treatments that target the balance between the different circuits may be useful for reducing excessive substance use. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace

NASA Astrophysics Data System (ADS)

Shen, Yansong; Guo, Baoyu; Chew, Sheng; Austin, Peter; Yu, Aibing

2015-02-01

An ironmaking blast furnace (BF) is a complex high-temperature moving bed reactor involving counter-, co- and cross-current flows of gas, liquid and solid, coupled with heat and mass exchange and chemical reactions. Two-dimensional (2D) models were widely used for understanding its internal state in the past. In this paper, a three-dimensional (3D) CFX-based mathematical model is developed for describing the internal state of a BF in terms of multiphase flow and the related thermochemical behavior, as well as process indicators. This model considers the intense interactions between gas, solid and liquid phases, and also their competition for the space. The model is applied to a BF covering from the burden surface at the top to the liquid surface in the hearth, where the raceway cavity is considered explicitly. The results show that the key in-furnace phenomena such as flow/temperature patterns and component distributions of solid, gas and liquid phases can be described and characterized in different regions inside the BF, including the gas and liquids flow circumferentially over the 3D raceway surface. The in-furnace distributions of key performance indicators such as reduction degree and gas utilization can also be predicted. This model offers a cost-effective tool to understand and control the complex BF flow and performance.

Health Marketing for the Massachusetts Childhood Obesity Research Demonstration Study: A Case Study.

PubMed

Criss, Shaniece; Blaine, Rachel E; Palamé, Megan; Perkins, Meghan; Davison, Kirsten; Kwass, Jo-Ann; Taveras, Elsie M

2018-03-01

This case study describes the Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD) health marketing campaign, examines the strategies used in such campaigns, and offers lessons learned to improve health marketing for future interventions. MA-CORD Health Marketing Components and Implementation. The three main components were an outdoor printed advertisement and texting campaign, social media with a focus on Facebook, and the Summer Passport Program, an event-based initiative in parks for children. The advertisements consisted of billboards, bus advertisements, and handouts. The text messaging component, which required families to actively text a keyword to join, had a low opt-in rate. Facebook page "likes" increased from 1,024 to 1,453 in New Bedford and from 175 to 1,091 in Fitchburg. Fitchburg received technical assistance and paid for ads on Facebook. The Summer Passport participation in parks ranged from 120 to 875 children with participation in the free park lunch program doubling in Fitchburg. Key lessons learned are engage communication experts from each community at the beginning of the project, use text messaging components with in-person staff onsite to assist participants in the opt-in process, build momentum for a Facebook presence through purchasing Facebook advertisements, and partner with local park departments for programming.

A Screening Mechanism Differentiating True from False Pain during Empathy.

PubMed

Sun, Ya-Bin; Lin, Xiao-Xiao; Ye, Wen; Wang, Ning; Wang, Jin-Yan; Luo, Fei

2017-09-13

Empathizing with another's suffering is important in social interactions. Empathic behavior is selectively elicited from genuine, meaningful pain but not from fake, meaningless scenarios. However, the brain's screening mechanism of false information from meaningful events and the time course for the screening process remains unclear. Using EEG combined with principle components analysis (PCA) techniques, here we compared temporal neurodynamics between the observation of pain and no-pain pictures as well as between true (painful expressions and needle-penetrated arms) and false (needle-penetrated faces with neutral expressions) pain pictures. The results revealed that pain vs. no-pain information is differentiated in the very early ERP components, i.e., the N1/P1 for the face and arm pictures categories and the VPP/N170 for the facial expression category while the mid-latency ERP components, N2 and P3, played key roles in differentiating true from false situations. The complex of N2 and P3 components may serve as a screening mechanism through which observers allocate their attentions to more important or relevant events and screen out false environmental information. This is the first study to describe and provide a time course of the screening process during pain empathy. These findings shed new light on the understanding of empathic processing.

A proposed clinical decision support architecture capable of supporting whole genome sequence information.

PubMed

Welch, Brandon M; Loya, Salvador Rodriguez; Eilbeck, Karen; Kawamoto, Kensaku

2014-04-04

Whole genome sequence (WGS) information may soon be widely available to help clinicians personalize the care and treatment of patients. However, considerable barriers exist, which may hinder the effective utilization of WGS information in a routine clinical care setting. Clinical decision support (CDS) offers a potential solution to overcome such barriers and to facilitate the effective use of WGS information in the clinic. However, genomic information is complex and will require significant considerations when developing CDS capabilities. As such, this manuscript lays out a conceptual framework for a CDS architecture designed to deliver WGS-guided CDS within the clinical workflow. To handle the complexity and breadth of WGS information, the proposed CDS framework leverages service-oriented capabilities and orchestrates the interaction of several independently-managed components. These independently-managed components include the genome variant knowledge base, the genome database, the CDS knowledge base, a CDS controller and the electronic health record (EHR). A key design feature is that genome data can be stored separately from the EHR. This paper describes in detail: (1) each component of the architecture; (2) the interaction of the components; and (3) how the architecture attempts to overcome the challenges associated with WGS information. We believe that service-oriented CDS capabilities will be essential to using WGS information for personalized medicine.

A Proposed Clinical Decision Support Architecture Capable of Supporting Whole Genome Sequence Information

PubMed Central

Welch, Brandon M.; Rodriguez Loya, Salvador; Eilbeck, Karen; Kawamoto, Kensaku

2014-01-01

Whole genome sequence (WGS) information may soon be widely available to help clinicians personalize the care and treatment of patients. However, considerable barriers exist, which may hinder the effective utilization of WGS information in a routine clinical care setting. Clinical decision support (CDS) offers a potential solution to overcome such barriers and to facilitate the effective use of WGS information in the clinic. However, genomic information is complex and will require significant considerations when developing CDS capabilities. As such, this manuscript lays out a conceptual framework for a CDS architecture designed to deliver WGS-guided CDS within the clinical workflow. To handle the complexity and breadth of WGS information, the proposed CDS framework leverages service-oriented capabilities and orchestrates the interaction of several independently-managed components. These independently-managed components include the genome variant knowledge base, the genome database, the CDS knowledge base, a CDS controller and the electronic health record (EHR). A key design feature is that genome data can be stored separately from the EHR. This paper describes in detail: (1) each component of the architecture; (2) the interaction of the components; and (3) how the architecture attempts to overcome the challenges associated with WGS information. We believe that service-oriented CDS capabilities will be essential to using WGS information for personalized medicine. PMID:25411644

GPM Plans for Radiometer Intercalibration

NASA Technical Reports Server (NTRS)

Stocker, Erich Franz; Stout, John; Chou, Joyce

2011-01-01

The international Global Precipitation Measurement (GPM) mission led by NASA and JAXA is planned as a multi-radiometer constellation mission. A key mission component is the ability to intercalibrate the Tb from the partner constellation radiometers and create inter-calibrated, mission consistent Tc. One of the enabling strategies for this approach is the launching of a joint NASA/JAXA core satellite which contains a JAXA/NICT provided dual precipitation radar and a NASA provided Microwave Imaging passive radiometer. The observations from these instruments on the core satellite provide the opportunity to develop a transfer reference standard that can then be applied across the partner provided constellation radiometers that enables the creation of mission consistent brightness temperatures. The other aspect of the strategy is the development of a community consensus intercalibration algorithm that will be applied to the Tb observations from partner radiometers and create the best calibrated Tc. Also described is the development of the framework in which the inter-calibration is included in the final algorithm. A part of the latter effort has been the development of a generic, logical structure which can be applied across radiometer types and which guarantees the user community that key information for using Tc properly is recorded. Key

Effective organizational control: implications for academic medicine.

PubMed

Wilkes, Michael S; Srinivasan, Malathi; Flamholtz, Eric

2005-11-01

This article provides a framework for understanding the nature, role, functioning, design, and effects of organizational oversight systems. Using a case study with elements recognizable to an academic audience, the authors explore how a dean of a fictitious School of Medicine might use organizational control structures to develop effective solutions to global disarray within the academic medical center. Organizational control systems are intended to help influence the behavior of people as members of a formal organization. They are necessary to motivate people toward organizational goals, to coordinate diverse efforts, and to provide feedback about problems. The authors present a model of control to make this process more visible within organizations. They explore the overlap among academic medical centers and large businesses-for instance, each is a billion-dollar enterprise with complex internal and external demands and multiple audiences. The authors identify and describe how to use the key components of an organization's control system: environment, culture, structure, and core control system. Elements of the core control system are identified, described, and explored. These closely articulating elements include planning, operations, measurement, evaluation, and feedback systems. Use of control portfolios is explored to achieve goal-outcome congruence. Additionally, the authors describe how the components of the control system can be used synergistically by academic leadership to create organizational change, congruent with larger organizational goals. The enterprise of medicine is quickly learning from the enterprise of business. Achieving goal-action congruence will better position academic medicine to meet its multiple missions.

Prenatal exposure to common environmental factors affects brain lipids and increases risk of developing autism spectrum disorders.

PubMed

Wong, Christine T; Wais, Joshua; Crawford, Dorota A

2015-11-01

The prevalence of autism spectrum disorders (ASDs) has been on the rise over recent years. The presence of diverse subsets of candidate genes in each individual with an ASD and the vast variability of phenotypical differences suggest that the interference of an exogenous environmental component may greatly contribute to the development of ASDs. The lipid mediator prostaglandin E2 (PGE2 ) is released from phospholipids of cell membranes, and is important in brain development and function; PGE2 is involved in differentiation, synaptic plasticity and calcium regulation. The previous review already described extrinsic factors, including deficient dietary supplementation, and exposure to oxidative stress, infections and inflammation that can disrupt signaling of the PGE2 pathway and contribute to ASDs. In this review, the structure and establishment of two key protective barriers for the brain during early development are described: the blood-brain barrier; and the placental barrier. Then, the first comprehensive summary of other environmental factors, such as exposure to chemicals in air pollution, pesticides and consumer products, which can also disturb PGE2 signaling and increase the risk for developing ASDs is provided. Also, how these exogenous agents are capable of crossing the protective barriers of the brain during critical developmental periods when barrier components are still being formed is described. This review underlines the importance of avoiding or limiting exposure to these factors during vulnerable periods in development. © 2015 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Small Group Discussion as a Key Component in Online Assessment Training for Enhanced Student Learning in Web-Based Peer Assessment

ERIC Educational Resources Information Center

Liu, Xiongyi; Li, Lan; Zhang, Zhihong

2018-01-01

The purpose of this study is to examine the effect of online assessment training, with synchronous group discussion as a key component, on subsequent web-based peer assessment results. Participants included 81 college students, mostly women, taking a business writing class. After initial submission of a draft counter-offer letter, they completed…

Toward an Engineering Model for the Aerodynamic Forces Acting on Wind Turbine Blades in Quasisteady Standstill and Blade Installation Situations

NASA Astrophysics Data System (ADS)

Gaunaa, Mac; Heinz, Joachim; Skrzypiński, Witold

2016-09-01

The crossflow principle is one of the key elements used in engineering models for prediction of the aerodynamic loads on wind turbine blades in standstill or blade installation situations, where the flow direction relative to the wind turbine blade has a component in the direction of the blade span direction. In the present work, the performance of the crossflow principle is assessed on the DTU 10MW reference blade using extensive 3D CFD calculations. Analysis of the computational results shows that there is only a relatively narrow region in which the crossflow principle describes the aerodynamic loading well. In some conditions the deviation of the predicted loadings can be quite significant, having a large influence on for instance the integral aerodynamic moments around the blade centre of mass; which is very important for single blade installation applications. The main features of these deviations, however, have a systematic behaviour on all force components, which in this paper is employed to formulate the first version of an engineering correction method to the crossflow principle applicable for wind turbine blades. The new correction model improves the agreement with CFD results for the key aerodynamic loads in crossflow situations. The general validity of this model for other blade shapes should be investigated in subsequent works.

Can we Build on Social Movement Theories to Develop and Improve Community-Based Participatory Research? A Framework Synthesis Review.

PubMed

Tremblay, Marie-Claude; Martin, Debbie H; Macaulay, Ann C; Pluye, Pierre

2017-06-01

A long-standing challenge in community-based participatory research (CBPR) has been to anchor practice and evaluation in a relevant and comprehensive theoretical framework of community change. This study describes the development of a multidimensional conceptual framework that builds on social movement theories to identify key components of CBPR processes. Framework synthesis was used as a general literature search and analysis strategy. An initial conceptual framework was developed from the theoretical literature on social movement. A literature search performed to identify illustrative CBPR projects yielded 635 potentially relevant documents, from which eight projects (corresponding to 58 publications) were retained after record and full-text screening. Framework synthesis was used to code and organize data from these projects, ultimately providing a refined framework. The final conceptual framework maps key concepts of CBPR mobilization processes, such as the pivotal role of the partnership; resources and opportunities as necessary components feeding the partnership's development; the importance of framing processes; and a tight alignment between the cause (partnership's goal), the collective action strategy, and the system changes targeted. The revised framework provides a context-specific model to generate a new, innovative understanding of CBPR mobilization processes, drawing on existing theoretical foundations. © 2017 The Authors American Journal of Community Psychology published by Wiley Periodicals, Inc. on behalf of Society for Community Research and Action.

Designing an oral health module for the Bachelor of Midwifery program at an Australian University.

PubMed

Duff, Margaret; Dahlen, Hannah G; Burns, Elaine; Priddis, Holly; Schmied, Virginia; George, Ajesh

2017-03-01

Maternal oral health is important yet many pregnant women are unaware of its significance. Midwives are advised to promote oral health during pregnancy and are supported to do this in Australia through the Midwifery Initiated Oral Health training program. However, limited undergraduate education is being provided to midwifery students in this area. The objective of this paper is to describe how an innovative oral health education module for an undergraduate midwifery course in Australia was designed using a multidisciplinary approach. Midwives experienced in curriculum development and key investigators from the Midwifery Initiated Oral Health program designed the module using existing literature. Constructive alignment, blended learning and scaffolding were used in the design process. The draft module was then reviewed by midwifery academics and their feedback incorporated. The final module involves 4 h of teaching and learning and contains three components incorporated into first year course units. Each component is aligned with existing learning outcomes and incorporates blended learning approaches and tutorials/class activities as well as online quizzes and personal reflection. The module details key information (current evidence; basic anatomy/physiology; common oral conditions; and guidelines during pregnancy) that could better prepare students to promote oral health in clinical practice. This is the first time such an innovative, multidisciplinary approach has been undertaken embedding oral health in an undergraduate midwifery program in Australia. Copyright © 2017 Elsevier Ltd. All rights reserved.

Recent developments in anti-cancer agents targeting PI3K, Akt and mTORC1/2.

PubMed

Dienstmann, Rodrigo; Rodon, Jordi; Markman, Ben; Tabernero, Josep

2011-05-01

Inappropriate PI3K signaling is one of the most frequent occurrences in human cancer and is critical for tumor progression. A variety of genetic mutations and amplifications have been described affecting key components of this pathway, with implications not only for tumorigenesis but also for resistance to targeted agents. Emerging preclinical research has significantly advanced our understanding of the PI3K pathway and its complex downstream signalling, interactions and crosstalk. This knowledge, combined with the limited clinical antitumor activity of mTOR complex 1 inhibitors, has led to the development of rationally designed drugs targeting key elements of this pathway, such as pure PI3K inhibitors (both pan-PI3K and isoform-specific), dual PI3K/ mTOR inhibitors, Akt inhibitors, and mTOR complexes 1 and 2 catalytic site inhibitors. This review will focus primarily on an analysis of newly developed inhibitors of this pathway that have entered clinical trials, and recently registered patents in this field.

Rural Health Networks and Care Coordination: Health Care Innovation in Frontier Communities to Improve Patient Outcomes and Reduce Health Care Costs

PubMed Central

Conway, Pat; Favet, Heidi; Hall, Laurie; Uhrich, Jenny; Palcher, Jeanette; Olimb, Sarah; Tesch, Nathan; York-Jesme, Margaret; Bianco, Joe

2017-01-01

Rural residents’ health is challenged by high health care costs, chronic diseases, and policy decisions affecting rural health care. This single-case, embedded design study, guided by community-based participatory research principles and using mixed methods, describes outcomes of implementation of a community care team (CCT) and care coordination to improve outcomes of patients living in a frontier community. Seventeen organizations and 165 adults identified as potential care coordination candidates constituted the target populations. Following CCT development, collaboration and cohesion increased among organizations. Patients who participated in care coordination reported similar physical and lower emotional health quality of life than national counterparts; emergency department use decreased following care coordination. Key components identified as successful in urban settings seem applicable in rural settings, with emphasis on the key role of team facilitators; need for intense care coordination for people with complex health needs, especially behavioral health needs; and access to specialty care through technology. PMID:27818417

A new method for teaching physical examination to junior medical students.

PubMed

Sayma, Meelad; Williams, Hywel Rhys

2016-01-01

Teaching effective physical examination is a key component in the education of medical students. Preclinical medical students often have insufficient clinical knowledge to apply to physical examination recall, which may hinder their learning when taught through certain understanding-based models. This pilot project aimed to develop a method to teach physical examination to preclinical medical students using "core clinical cases", overcoming the need for "rote" learning. This project was developed utilizing three cycles of planning, action, and reflection. Thematic analysis of feedback was used to improve this model, and ensure it met student expectations. A model core clinical case developed in this project is described, with gout as the basis for a "foot and ankle" examination. Key limitations and difficulties encountered on implementation of this pilot are discussed for future users, including the difficulty encountered in "content overload". This approach aims to teach junior medical students physical examination through understanding, using a simulated patient environment. Robust research is now required to demonstrate efficacy and repeatability in the physical examination of other systems.

A Systematic Review: Costing and Financing of Water, Sanitation, and Hygiene (WASH) in Schools

PubMed Central

McGinnis, Shannon M.; McKeon, Thomas; Desai, Richa; Ejelonu, Akudo; Laskowski, Stanley; Murphy, Heather M.

2017-01-01

Despite the success of recent efforts to increase access to improved water, sanitation, and hygiene (WASH) globally, approximately one-third of schools around the world still lack adequate WASH services. A lack of WASH in schools can lead to the spread of preventable disease and increase school absences, especially among women. Inadequate financing and budgeting has been named as a key barrier for integrating successful and sustainable WASH programs into school settings. For this reason, the purpose of this review is to describe the current knowledge around the costs of WASH components as well as financing models that could be applied to WASH in schools. Results show a lack of information around WASH costing, particularly around software elements as well as a lack of data overall for WASH in school settings as compared to community WASH. This review also identifies several key considerations when designing WASH budgets or selecting financing mechanisms. Findings may be used to advise future WASH in school programs. PMID:28425945

Printable inorganic nanomaterials for flexible transparent electrodes: from synthesis to application

NASA Astrophysics Data System (ADS)

Wang, Dingrun; Mei, Yongfeng; Huang, Gaoshan

2018-01-01

Printed and flexible electronics are definitely promising cutting-edge electronic technologies of the future. They offer a wide-variety of applications such as flexible circuits, flexible displays, flexible solar cells, skin-like pressure sensors, and radio frequency identification tags in our daily life. As the most-fundamental component of electronics, electrodes are made of conductive materials that play a key role in flexible and printed electronic devices. In this review, various inorganic conductive materials and strategies for obtaining highly conductive and uniform electrodes are demonstrated. Applications of printed electrodes fabricated via these strategies are also described. Nevertheless, there are a number of challenges yet to overcome to optimize the processing and performance of printed electrodes. Project supported by the National Natural Science Foundation of China (Nos. 51475093, U1632115), the Science and Technology Commission of Shanghai Municipality (No. 14JC1400200), the National Key Technologies R&D Program of China (No. 2015ZX02102-003), and the Changjiang Young Scholars Programme of China.

Enhancing presentation skills for the advanced practice nurse: strategies for success.

PubMed

Vollman, Kathleen M

2005-01-01

Professional speaking is a component of the professional practice role of the advanced practice nurse (APN). The skills to communicate effectively to one person or an audience of 100 provide the APN with the essential tools for implementing change, collaborating effectively, presenting information at professional meetings, or communicating the impact of clinical outcomes in the boardroom. Public speaking skills, a professional image, and improved communication can facilitate advancement along any career ladder. The greater your fear, the more self-confidence you will gain by stepping up to a challenge and conquering it. This article describes strategies for organizing and presenting your message in a clear and concise format. Techniques to manage the anxiety produced when attempting to articulate your thoughts is essential for effective communication. Skills for enhancing the delivery of your message through effective body language, professional image, voice modulation, and use of audiovisual aids are addressed. Creative techniques for fielding questions are key in promoting a dynamic closure and provide consistent reinforcement of the key message content.

Metabolic Phenotyping of Diet and Dietary Intake.

PubMed

Brignardello, J; Holmes, E; Garcia-Perez, I

Nutrition provides the building blocks for growth, repair, and maintenance of the body and is key to maintaining health. Exposure to fast foods, mass production of dietary components, and wider importation of goods have challenged the balance between diet and health in recent decades, and both scientists and clinicians struggle to characterize the relationship between this changing dietary landscape and human metabolism with its consequent impact on health. Metabolic phenotyping of foods, using high-density data-generating technologies to profile the biochemical composition of foods, meals, and human samples (pre- and postfood intake), can be used to map the complex interaction between the diet and human metabolism and also to assess food quality and safety. Here, we outline some of the techniques currently used for metabolic phenotyping and describe key applications in the food sciences, ending with a broad outlook at some of the newer technologies in the field with a view to exploring their potential to address some of the critical challenges in nutritional science. © 2017 Elsevier Inc. All rights reserved.

Key design elements of a data utility for national biosurveillance: event-driven architecture, caching, and Web service model.

PubMed

Tsui, Fu-Chiang; Espino, Jeremy U; Weng, Yan; Choudary, Arvinder; Su, Hoah-Der; Wagner, Michael M

2005-01-01

The National Retail Data Monitor (NRDM) has monitored over-the-counter (OTC) medication sales in the United States since December 2002. The NRDM collects data from over 18,600 retail stores and processes over 0.6 million sales records per day. This paper describes key architectural features that we have found necessary for a data utility component in a national biosurveillance system. These elements include event-driven architecture to provide analyses of data in near real time, multiple levels of caching to improve query response time, high availability through the use of clustered servers, scalable data storage through the use of storage area networks and a web-service function for interoperation with affiliated systems. The methods and architectural principles are relevant to the design of any production data utility for public health surveillance-systems that collect data from multiple sources in near real time for use by analytic programs and user interfaces that have substantial requirements for time-series data aggregated in multiple dimensions.

A Systematic Review: Costing and Financing of Water, Sanitation, and Hygiene (WASH) in Schools.

PubMed

McGinnis, Shannon M; McKeon, Thomas; Desai, Richa; Ejelonu, Akudo; Laskowski, Stanley; Murphy, Heather M

2017-04-20

Despite the success of recent efforts to increase access to improved water, sanitation, and hygiene (WASH) globally, approximately one-third of schools around the world still lack adequate WASH services. A lack of WASH in schools can lead to the spread of preventable disease and increase school absences, especially among women. Inadequate financing and budgeting has been named as a key barrier for integrating successful and sustainable WASH programs into school settings. For this reason, the purpose of this review is to describe the current knowledge around the costs of WASH components as well as financing models that could be applied to WASH in schools. Results show a lack of information around WASH costing, particularly around software elements as well as a lack of data overall for WASH in school settings as compared to community WASH. This review also identifies several key considerations when designing WASH budgets or selecting financing mechanisms. Findings may be used to advise future WASH in school programs.

The development of an efficient mass balance approach for the purity assignment of organic calibration standards.

PubMed

Davies, Stephen R; Alamgir, Mahiuddin; Chan, Benjamin K H; Dang, Thao; Jones, Kai; Krishnaswami, Maya; Luo, Yawen; Mitchell, Peter S R; Moawad, Michael; Swan, Hilton; Tarrant, Greg J

2015-10-01

The purity determination of organic calibration standards using the traditional mass balance approach is described. Demonstrated examples highlight the potential for bias in each measurement and the need to implement an approach that provides a cross-check for each result, affording fit for purpose purity values in a timely and cost-effective manner. Chromatographic techniques such as gas chromatography with flame ionisation detection (GC-FID) and high-performance liquid chromatography with UV detection (HPLC-UV), combined with mass and NMR spectroscopy, provide a detailed impurity profile allowing an efficient conversion of chromatographic peak areas into relative mass fractions, generally avoiding the need to calibrate each impurity present. For samples analysed by GC-FID, a conservative measurement uncertainty budget is described, including a component to cover potential variations in the response of each unidentified impurity. An alternative approach is also detailed in which extensive purification eliminates the detector response factor issue, facilitating the certification of a super-pure calibration standard which can be used to quantify the main component in less-pure candidate materials. This latter approach is particularly useful when applying HPLC analysis with UV detection. Key to the success of this approach is the application of both qualitative and quantitative (1)H NMR spectroscopy.

[The qualitative research on social inequalities in health: the life courses].

PubMed

Roy, Bernard; De Koninck, Maria

2013-02-11

Adopting a lifecourse perspective is more and more frequent in the health inequalities research field. This article describes such an approach, as applied in a study on poverty and social exclusion. In this study, life histories were collected through open interviews and focused on the meaning of lived experiences. An original analysis table was used, in which words are grouped within categories identifying the different components of a lifecourse. Whether it refers to experiences lived in childhood or adulthood, the life history enables the placing of these within the individual's lifecourse. The horizontal analysis of different individual stories makes it possible to identify experiences that have harmful, or conversely, beneficial effects. When transferring results, reporting the experiences lived by the populations using the same words they did to describe them can help those responsible for program development or implementation understand the genesis of social health inequities. The analysis of life histories, based on the different components of a lifecourse, allows the identification of key moments in the interviewees' life evolution and, in an action perspective, to do so while taking health and social intervention fields into account. Such results make it easier to design actions to counter social health inequities - and above all their chronic nature - that are suited to the realities encountered.

Universal Responses of Cyclic-Oxidation Models Studied

NASA Technical Reports Server (NTRS)

Smialek, James L.

2003-01-01

Oxidation is an important degradation process for materials operating in the high-temperature air or oxygen environments typical of jet turbine or rocket engines. Reaction of the combustion gases with the component material forms surface layer scales during these oxidative exposures. Typically, the instantaneous rate of reaction is inversely proportional to the existing scale thickness, giving rise to parabolic kinetics. However, more realistic applications entail periodic startup and shutdown. Some scale spallation may occur upon cooling, resulting in loss of the protective diffusion barrier provided by a fully intact scale. Upon reheating, the component will experience accelerated oxidation due to this spallation. Cyclic-oxidation testing has, therefore, been a mainstay of characterization and performance ranking for high-temperature materials. Models simulate this process by calculating how a scale spalls upon cooling and regrows upon heating (refs. 1 to 3). Recently released NASA software (COSP for Windows) allows researchers to specify a uniform layer or discrete segments of spallation (ref. 4). Families of model curves exhibit consistent regularity and trends with input parameters, and characteristic features have been empirically described in terms of these parameters. Although much insight has been gained from experimental and model curves, no equation has been derived that can describe this behavior explicitly as functions of the key oxidation parameters.

Radiation oncology and medical physicists quality assurance in British Columbia Cancer Agency Provincial Prostate Brachytherapy Program.

PubMed

Keyes, Mira; Morris, William James; Spadinger, Ingrid; Araujo, Cynthia; Cheung, Arthur; Chng, Nick; Crook, Juanita; Halperin, Ross; Lapointe, Vince; Miller, Stacy; Pai, Howard; Pickles, Tom

2013-01-01

To describe in detail British Columbia (BC) Cancer Agency (BCCA) Provincial Prostate Brachytherapy (PB) Quality Assurance (QA) Program. The BCCA PB Program was established in 1997. It operates as one system, unified and supported by electronic and information systems, making it a single PB treatment provider for province of BC and Yukon. To date, >4000 patients have received PB (450 implants in 2011), making it the largest program in Canada. The Program maintains a large provincial prospective electronic database with records on all patients, including disease characteristics, risk stratification, pathology, preplan and postimplant dosimetric data, follow-up of prostate-specific antigen, and toxicity outcomes. QA was an integral part of the program since its inception. A formal QA Program was established in 2002, with key components that include: unified eligibility criteria and planning system, comprehensive database, physics and oncologist training and mentorship programs, peer review process, individual performance outcomes and feedback process, structured continuing education and routine assessment of the program's dosimetry, toxicity and prostate-specific antigen outcomes, administration and program leadership that promotes a strong culture of patient safety. The emphasis on creating a robust, broad-based network of skilled providers has been achieved by the program's requirements for training, education, and the QA process. The formal QA process is considered a key factor for the success of cancer control outcomes achieved at BCCA. Although this QA model may not be wholly transferable to all PB programs, some of its key components may be applicable to other programs to ensure quality in PB and patient safety. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

funRNA: a fungi-centered genomics platform for genes encoding key components of RNAi.

PubMed

Choi, Jaeyoung; Kim, Ki-Tae; Jeon, Jongbum; Wu, Jiayao; Song, Hyeunjeong; Asiegbu, Fred O; Lee, Yong-Hwan

2014-01-01

RNA interference (RNAi) is involved in genome defense as well as diverse cellular, developmental, and physiological processes. Key components of RNAi are Argonaute, Dicer, and RNA-dependent RNA polymerase (RdRP), which have been functionally characterized mainly in model organisms. The key components are believed to exist throughout eukaryotes; however, there is no systematic platform for archiving and dissecting these important gene families. In addition, few fungi have been studied to date, limiting our understanding of RNAi in fungi. Here we present funRNA http://funrna.riceblast.snu.ac.kr/, a fungal kingdom-wide comparative genomics platform for putative genes encoding Argonaute, Dicer, and RdRP. To identify and archive genes encoding the abovementioned key components, protein domain profiles were determined from reference sequences obtained from UniProtKB/SwissProt. The domain profiles were searched using fungal, metazoan, and plant genomes, as well as bacterial and archaeal genomes. 1,163, 442, and 678 genes encoding Argonaute, Dicer, and RdRP, respectively, were predicted. Based on the identification results, active site variation of Argonaute, diversification of Dicer, and sequence analysis of RdRP were discussed in a fungus-oriented manner. funRNA provides results from diverse bioinformatics programs and job submission forms for BLAST, BLASTMatrix, and ClustalW. Furthermore, sequence collections created in funRNA are synced with several gene family analysis portals and databases, offering further analysis opportunities. funRNA provides identification results from a broad taxonomic range and diverse analysis functions, and could be used in diverse comparative and evolutionary studies. It could serve as a versatile genomics workbench for key components of RNAi.

VfrB Is a Key Activator of the Staphylococcus aureus SaeRS Two-Component System.

PubMed

Krute, Christina N; Rice, Kelly C; Bose, Jeffrey L

2017-03-01

In previous studies, we identified the fatty acid kinase virulence factor regulator B (VfrB) as a potent regulator of α-hemolysin and other virulence factors in Staphylococcus aureus In this study, we demonstrated that VfrB is a positive activator of the SaeRS two-component regulatory system. Analysis of vfrB , saeR , and saeS mutant strains revealed that VfrB functions in the same pathway as SaeRS. At the transcriptional level, the promoter activities of SaeRS class I ( coa ) and class II ( hla ) target genes were downregulated during the exponential growth phase in the vfrB mutant, compared to the wild-type strain. In addition, saePQRS expression was decreased in the vfrB mutant strain, demonstrating a need for this protein in the autoregulation of SaeRS. The requirement for VfrB-mediated activation was circumvented when SaeS was constitutively active due to an SaeS (L18P) substitution. Furthermore, activation of SaeS via human neutrophil peptide 1 (HNP-1) overcame the dependence on VfrB for transcription from class I Sae promoters. Consistent with the role of VfrB in fatty acid metabolism, hla expression was decreased in the vfrB mutant with the addition of exogenous myristic acid. Lastly, we determined that aspartic acid residues D38 and D40, which are predicted to be key to VfrB enzymatic activity, were required for VfrB-mediated α-hemolysin production. Collectively, this study implicates VfrB as a novel accessory protein needed for the activation of SaeRS in S. aureus IMPORTANCE The SaeRS two-component system is a key regulator of virulence determinant production in Staphylococcus aureus Although the regulon of this two-component system is well characterized, the activation mechanisms, including the specific signaling molecules, remain elusive. Elucidating the complex regulatory circuit of SaeRS regulation is important for understanding how the system contributes to disease causation by this pathogen. To this end, we have identified the fatty acid kinase VfrB as a positive regulatory modulator of SaeRS-mediated transcription of virulence factors in S. aureus In addition to describing a new regulatory aspect of SaeRS, this study establishes a link between fatty acid kinase activity and virulence factor regulation. Copyright © 2017 American Society for Microbiology.

Interface design recommendations for computerised clinical audit and feedback: Hybrid usability evidence from a research-led system.

PubMed

Brown, Benjamin; Balatsoukas, Panos; Williams, Richard; Sperrin, Matthew; Buchan, Iain

2016-10-01

Audit and Feedback (A&F) is a widely used quality improvement technique that measures clinicians' clinical performance and reports it back to them. Computerised A&F (e-A&F) system interfaces may consist of four key components: (1) Summaries of clinical performance; (2) Patient lists; (3) Patient-level data; (4) Recommended actions. There is a lack of evidence regarding how to best design e-A&F interfaces; establishing such evidence is key to maximising usability, and in turn improving patient safety. To evaluate the usability of a novel theoretically-informed and research-led e-A&F system for primary care (the Performance Improvement plaN GeneratoR: PINGR). (1) Describe PINGR's design, rationale and theoretical basis; (2) Identify usability issues with PINGR; (3) Understand how these issues may interfere with the cognitive goals of end-users; (4) Translate the issues into recommendations for the user-centred design of e-A&F systems. Eight experienced health system evaluators performed a usability inspection using an innovative hybrid approach consisting of five stages: (1) Development of representative user tasks, Goals, and Actions; (2) Combining Heuristic Evaluation and Cognitive Walkthrough methods into a single protocol to identify usability issues; (3) Consolidation of issues; (4) Severity rating of consolidated issues; (5) Analysis of issues according to usability heuristics, interface components, and Goal-Action structure. A final list of 47 issues were categorised into 8 heuristic themes. The most error-prone heuristics were 'Consistency and standards' (13 usability issues; 28% of the total) and 'Match between system and real world' (n=10, 21%). The recommended actions component of the PINGR interface had the most usability issues (n=21, 45%), followed by patient-level data (n=5, 11%), patient lists (n=4, 9%), and summaries of clinical performance (n=4, 9%). The most error-prone Actions across all user Goals were: (1) Patient selection from a list; (2) Data identification from a figure (both population-level and patient-level); (3) Disagreement with a system recommendation. By contextualising our findings within the wider literature on health information system usability, we provide recommendations for the design of e-A&F system interfaces relating to their four key components, in addition to how they may be integrated within a system. Copyright © 2016. Published by Elsevier Ireland Ltd.

Design of Community Resource Inventories as a Component of Scalable Earth Science Infrastructure: Experience of the Earthcube CINERGI Project

NASA Astrophysics Data System (ADS)

Zaslavsky, I.; Richard, S. M.; Valentine, D. W., Jr.; Grethe, J. S.; Hsu, L.; Malik, T.; Bermudez, L. E.; Gupta, A.; Lehnert, K. A.; Whitenack, T.; Ozyurt, I. B.; Condit, C.; Calderon, R.; Musil, L.

2014-12-01

EarthCube is envisioned as a cyberinfrastructure that fosters new, transformational geoscience by enabling sharing, understanding and scientifically-sound and efficient re-use of formerly unconnected data resources, software, models, repositories, and computational power. Its purpose is to enable science enterprise and workforce development via an extensible and adaptable collaboration and resource integration framework. A key component of this vision is development of comprehensive inventories supporting resource discovery and re-use across geoscience domains. The goal of the EarthCube CINERGI (Community Inventory of EarthCube Resources for Geoscience Interoperability) project is to create a methodology and assemble a large inventory of high-quality information resources with standard metadata descriptions and traceable provenance. The inventory is compiled from metadata catalogs maintained by geoscience data facilities, as well as from user contributions. The latter mechanism relies on community resource viewers: online applications that support update and curation of metadata records. Once harvested into CINERGI, metadata records from domain catalogs and community resource viewers are loaded into a staging database implemented in MongoDB, and validated for compliance with ISO 19139 metadata schema. Several types of metadata defects detected by the validation engine are automatically corrected with help of several information extractors or flagged for manual curation. The metadata harvesting, validation and processing components generate provenance statements using W3C PROV notation, which are stored in a Neo4J database. Thus curated metadata, along with the provenance information, is re-published and accessed programmatically and via a CINERGI online application. This presentation focuses on the role of resource inventories in a scalable and adaptable information infrastructure, and on the CINERGI metadata pipeline and its implementation challenges. Key project components are described at the project's website (http://workspace.earthcube.org/cinergi), which also provides access to the initial resource inventory, the inventory metadata model, metadata entry forms and a collection of the community resource viewers.

Exploring Systems That Support Good Clinical Care in Indigenous Primary Health-care Services: A Retrospective Analysis of Longitudinal Systems Assessment Tool Data from High-Improving Services.

PubMed

Woods, Cindy; Carlisle, Karen; Larkins, Sarah; Thompson, Sandra Claire; Tsey, Komla; Matthews, Veronica; Bailie, Ross

2017-01-01

Continuous Quality Improvement is a process for raising the quality of primary health care (PHC) across Indigenous PHC services. In addition to clinical auditing using plan, do, study, and act cycles, engaging staff in a process of reflecting on systems to support quality care is vital. The One21seventy Systems Assessment Tool (SAT) supports staff to assess systems performance in terms of five key components. This study examines quantitative and qualitative SAT data from five high-improving Indigenous PHC services in northern Australia to understand the systems used to support quality care. High-improving services selected for the study were determined by calculating quality of care indices for Indigenous health services participating in the Audit and Best Practice in Chronic Disease National Research Partnership. Services that reported continuing high improvement in quality of care delivered across two or more audit tools in three or more audits were selected for the study. Precollected SAT data (from annual team SAT meetings) are presented longitudinally using radar plots for quantitative scores for each component, and content analysis is used to describe strengths and weaknesses of performance in each systems' component. High-improving services were able to demonstrate strong processes for assessing system performance and consistent improvement in systems to support quality care across components. Key strengths in the quality support systems included adequate and orientated workforce, appropriate health system supports, and engagement with other organizations and community, while the weaknesses included lack of service infrastructure, recruitment, retention, and support for staff and additional costs. Qualitative data revealed clear voices from health service staff expressing concerns with performance, and subsequent SAT data provided evidence of changes made to address concerns. Learning from the processes and strengths of high-improving services may be useful as we work with services striving to improve the quality of care provided in other areas.

Sizing Power Components of an Electrically Driven Tail Cone Thruster and a Range Extender

NASA Technical Reports Server (NTRS)

Jansen, Ralph H.; Bowman, Cheryl; Jankovsky, Amy

2016-01-01

The aeronautics industry has been challenged on many fronts to increase efficiency, reduce emissions, and decrease dependency on carbon-based fuels. This paper provides an overview of the turboelectric and hybrid electric technologies being developed under NASA's Advanced Air Transportation Technology (AATT) Project and discusses how these technologies can impact vehicle design. The discussion includes an overview of key hybrid electric studies and technology investments, the approach to making informed investment decisions based on key performance parameters and mission studies, and the power system architectures for two candidate aircraft. Finally, the power components for a single-aisle turboelectric aircraft with an electrically driven tail cone thruster and for a hybrid-electric nine-passenger aircraft with a range extender are parametrically sized, and the sensitivity of these components to key parameters is presented.

Predictors of women's attitudes toward world health organization framework convention on tobacco control policies in urban China.

PubMed

Abdullah, Abu Saleh; Yang, Tingzhong; Beard, Jennifer

2010-05-01

In 2005 China ratified the WHO Framework Convention on Tobacco Control (FCTC) and committed to implement tobacco control legislation and policies. Wide variation in smoking prevalence between men and women in China and the high exposure of women to secondhand smoke suggest that each component of the FCTC should be analyzed from a gender perspective. This study describes women's attitudes toward and predictors of support for four key FCTC measures in China. Cross-sectional data were collected from 1,408 women in two urban cities on demographics, smoking behavior, and attitudes toward key tobacco control measures. Seventy percent of the study women (n = 1,408) were exposed to secondhand smoke at home, work, or other public places. Support for the four FCTC measures of interest was as follows: 92.5% supported banning smoking in public places, 79.2% supported increasing the cigarette tax, 92% supported stronger health warnings on cigarette packages, and 87.1% favored banning tobacco advertising. The predictors for supporting each of these measures included socioeconomic, attitudinal, and behavioral factors. Urban Chinese women appear to support implementation of key WHO FCTC measures. Predictors of women's attitudes toward the key FCTC measures varied. The formulation process resulting from the tobacco control policy should consider these women-specific predictors in order to facilitate successful implementation of FCTC.

Direct 4D printing via active composite materials.

PubMed

Ding, Zhen; Yuan, Chao; Peng, Xirui; Wang, Tiejun; Qi, H Jerry; Dunn, Martin L

2017-04-01

We describe an approach to print composite polymers in high-resolution three-dimensional (3D) architectures that can be rapidly transformed to a new permanent configuration directly by heating. The permanent shape of a component results from the programmed time evolution of the printed shape upon heating via the design of the architecture and process parameters of a composite consisting of a glassy shape memory polymer and an elastomer that is programmed with a built-in compressive strain during photopolymerization. Upon heating, the shape memory polymer softens, releases the constraint on the strained elastomer, and allows the object to transform into a new permanent shape, which can then be reprogrammed into multiple subsequent shapes. Our key advance, the markedly simplified creation of high-resolution complex 3D reprogrammable structures, promises to enable myriad applications across domains, including medical technology, aerospace, and consumer products, and even suggests a new paradigm in product design, where components are simultaneously designed to inhabit multiple configurations during service.

Technology assessment in healthcare: a review and description of a "best practice" technology assessment process.

PubMed

Fernandez, A M; Schrogie, J J; Wilson, W W; Nash, D B

1997-01-01

Technology assessment has become a rapidly growing component of the healthcare system. It has assumed a functional role in operational settings and is rapidly impacting decisions involving purchasing, coverage, and reimbursement. This review is intended to assist the healthcare decision maker in considering the application of technology assessment in healthcare, so as to maximize the efficiency of future purchasing decisions. This "best practice" was synthesized after identifying key institutions performing technology assessment in healthcare and analyzing their working processes, including literature review, consensus panel discussions, and expert opinion. We describe this best practice on a reiterative loop that consists of five processes: awareness, strategic appropriateness, analysis versus need, acquisition and implementation, and reassessment. Typical barriers to adoption of technology assessment are also identified and discussed. This review suggests a common terminology for the core processes involved in technology assessment, thereby facilitating a more uniform understanding among the different components of the healthcare system (i.e., payer, provider, and society) while recognizing their different perspectives.

The Centrosome and Its Duplication Cycle

PubMed Central

Fu, Jingyan; Hagan, Iain M.; Glover, David M.

2015-01-01

The centrosome was discovered in the late 19th century when mitosis was first described. Long recognized as a key organelle of the spindle pole, its core component, the centriole, was realized more than 50 or so years later also to comprise the basal body of the cilium. Here, we chart the more recent acquisition of a molecular understanding of centrosome structure and function. The strategies for gaining such knowledge were quickly developed in the yeasts to decipher the structure and function of their distinctive spindle pole bodies. Only within the past decade have studies with model eukaryotes and cultured cells brought a similar degree of sophistication to our understanding of the centrosome duplication cycle and the multiple roles of this organelle and its component parts in cell division and signaling. Now as we begin to understand these functions in the context of development, the way is being opened up for studies of the roles of centrosomes in human disease. PMID:25646378

A mobile phone enabled health promotion program for middle-aged males.

PubMed

Ding, H; Karunanithi, M; Duncan, M; Ireland, D; Noakes, M; Hooker, C

2013-01-01

The prevalence of chronic diseases among middle aged males outweigh their female counterparts in developed countries. To prevent this, delivery of health promotion programs targeting lifestyle modifications of physical activity and nutrition in middle-aged males has been essential, but often difficult. ManUp health promotion program was a recent initiative that uses current advances in information and communication technology (ICT) to reach the middle-aged males. One of the key components of the ICT approach was the development of smartphone application to enable middle-aged men to uptake the program with their own mobile phone. The smart phone application was aimed at providing varied level of challenges towards physical activity and healthy eating behavior, with interactive and motivational feedback SMS messages. The ManUp program was recently implemented and trialed in a randomized control trial in Gladstone and Rockhampton, Queens. This paper describes the components of the smart phone application integrated within the ManUp health promotion program.

[Pulmonary sarcomatoid carcinoma].

PubMed

Antoine, Martine; Vieira, Thibault; Fallet, Vincent; Hamard, Cécile; Duruisseaux, Michael; Cadranel, Jacques; Wislez, Marie

2016-01-01

Pulmonary sarcomatoid carcinomas are a rare group of tumors accounting for about one percent of non-small cell lung carcinoma (NSCLC). In 2015, the World Health Organization classification united under this name all the carcinomas with sarcomatous-like component with spindle cell or giant cell appearance, or associated with a sarcomatous component sometimes heterologous. There are five subtypes: pleomorphic carcinoma, spindle cell carcinoma, giant cell carcinoma, carcinosarcoma and pulmonary blastoma. Clinical characteristics are not specific from the other subtypes of NSCLC. Epithelial to mesenchymal transition pathway may play a key role. Patients, usually tobacco smokers, are frequently symptomatic. Tumors are voluminous more often peripherical than central, with strong fixation on FDG TEP CT. Distant metastases are frequent with atypical visceral locations. These tumors have poorer prognosis than the other NSCLC subtypes because of great aggressivity, and frequent chemoresistance. Here we present pathological description and a review of literature with molecular features in order to better describe these tumors and perhaps introduce new therapeutics. Copyright © 2016. Published by Elsevier Masson SAS.

Modeling Yeast Cell Polarization Induced by Pheromone Gradients

NASA Astrophysics Data System (ADS)

Yi, Tau-Mu; Chen, Shanqin; Chou, Ching-Shan; Nie, Qing

2007-07-01

Yeast cells respond to spatial gradients of mating pheromones by polarizing and projecting up the gradient toward the source. It is thought that they employ a spatial sensing mechanism in which the cell compares the concentration of pheromone at different points on the cell surface and determines the maximum point, where the projection forms. Here we constructed the first spatial mathematical model of the yeast pheromone response that describes the dynamics of the heterotrimeric and Cdc42p G-protein cycles, which are linked in a cascade. Two key performance objectives of this system are (1) amplification—converting a shallow external gradient of ligand to a steep internal gradient of protein components and (2) tracking—following changes in gradient direction. We used simulations to investigate amplification mechanisms that allow tracking. We identified specific strategies for regulating the spatial dynamics of the protein components (i.e. their changing location in the cell) that would enable the cell to achieve both objectives.

Advanced photovoltaic solar array - Design and performance

NASA Technical Reports Server (NTRS)

Kurland, Richard; Stella, Paul

1992-01-01

This paper reports on the development of an ultralightweight flexible blanket, flatpack, foldout solar array design that can provide 3- to 4-fold improvement on specific power performance of current rigid panel arrays and a factor of two improvement over a first-generation flexible blanket array developed as a forerunner to the Space Station Freedom array. To date a prototype wing has been built with a projected specific power performance of about 138 W/kg at beginning-of-life (BOL) and 93 W/kg end-of-life (EOL) at 12 kW (BOL) for a 10-year geosynchronous (GEO) mission. The prototype wing hardware has been subjected to a series of system-level tests to demonstrate design feasibility. The design of the array is summarized. The major trade studies that led to the selection of the baseline design are discussed. Key system-level and component-level testing are described. Array-level performance projections are presented as a function of existing and advanced solar array component technology for various mission applications.

Validating the Test Procedures Described in UL 1741 SA and IEEE P1547.1: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahmud, Rasel; Hoke, Anderson F; Narang, David J

This paper investigates the test procedures specified in UL 1741 SA and the upcoming revision to IEEE P1547.1. A 550 kVA photovoltaic inverter was chosen for the tests. This research reveals some of key the components to consider while doing certification tests for UL 1741 SA and IEEE P1547.1. This paper also identifies some issues requiring consideration for future releases of the standard, i.e. IEEE P1547.1. This paper investigates the test procedures specified in UL 1741 SA and the upcoming revision to IEEE P1547.1. A 550 kVA photovoltaic inverter was chosen for the tests. This research reveals some of keymore » the components to consider while doing certification tests for UL 1741 SA and IEEE P1547.1. This paper also identifies some issues requiring consideration for future releases of the standard, i.e. IEEE P1547.1.« less

Visual identification system for homeland security and law enforcement support

NASA Astrophysics Data System (ADS)

Samuel, Todd J.; Edwards, Don; Knopf, Michael

2005-05-01

This paper describes the basic configuration for a visual identification system (VIS) for Homeland Security and law enforcement support. Security and law enforcement systems with an integrated VIS will accurately and rapidly provide identification of vehicles or containers that have entered, exited or passed through a specific monitoring location. The VIS system stores all images and makes them available for recall for approximately one week. Images of alarming vehicles will be archived indefinitely as part of the alarming vehicle"s or cargo container"s record. Depending on user needs, the digital imaging information will be provided electronically to the individual inspectors, supervisors, and/or control center at the customer"s office. The key components of the VIS are the high-resolution cameras that capture images of vehicles, lights, presence sensors, image cataloging software, and image recognition software. In addition to the cameras, the physical integration and network communications of the VIS components with the balance of the security system and client must be ensured.

Improved GSO Optimized ESN Soft-Sensor Model of Flotation Process Based on Multisource Heterogeneous Information Fusion

PubMed Central

Wang, Jie-sheng; Han, Shuang; Shen, Na-na

2014-01-01

For predicting the key technology indicators (concentrate grade and tailings recovery rate) of flotation process, an echo state network (ESN) based fusion soft-sensor model optimized by the improved glowworm swarm optimization (GSO) algorithm is proposed. Firstly, the color feature (saturation and brightness) and texture features (angular second moment, sum entropy, inertia moment, etc.) based on grey-level co-occurrence matrix (GLCM) are adopted to describe the visual characteristics of the flotation froth image. Then the kernel principal component analysis (KPCA) method is used to reduce the dimensionality of the high-dimensional input vector composed by the flotation froth image characteristics and process datum and extracts the nonlinear principal components in order to reduce the ESN dimension and network complex. The ESN soft-sensor model of flotation process is optimized by the GSO algorithm with congestion factor. Simulation results show that the model has better generalization and prediction accuracy to meet the online soft-sensor requirements of the real-time control in the flotation process. PMID:24982935

A computer simulation of the turbocharged turbo compounded diesel engine system: A description of the thermodynamic and heat transfer models

NASA Technical Reports Server (NTRS)

Assanis, D. N.; Ekchian, J. E.; Frank, R. M.; Heywood, J. B.

1985-01-01

A computer simulation of the turbocharged turbocompounded direct-injection diesel engine system was developed in order to study the performance characteristics of the total system as major design parameters and materials are varied. Quasi-steady flow models of the compressor, turbines, manifolds, intercooler, and ducting are coupled with a multicylinder reciprocator diesel model, where each cylinder undergoes the same thermodynamic cycle. The master cylinder model describes the reciprocator intake, compression, combustion and exhaust processes in sufficient detail to define the mass and energy transfers in each subsystem of the total engine system. Appropriate thermal loading models relate the heat flow through critical system components to material properties and design details. From this information, the simulation predicts the performance gains, and assesses the system design trade-offs which would result from the introduction of selected heat transfer reduction materials in key system components, over a range of operating conditions.

Design and Construction of a Multi-wavelength, Micromirror Total Internal Reflectance Fluorescence Microscope

PubMed Central

Larson, Joshua; Kirk, Matt; Drier, Eric A.; O’Brien, William; MacKay, James F.; Friedman, Larry; Hoskins, Aaron

2015-01-01

Colocalization Single Molecule Spectroscopy (CoSMoS) has proven to be a useful method for studying the composition, kinetics, and mechanisms of complex cellular machines. Key to the technique is the ability to simultaneously monitor multiple proteins and/or nucleic acids as they interact with one another. Here we describe a protocol for constructing a CoSMoS micromirror Total Internal Reflection Fluorescence Microscope (mmTIRFM). Design and construction of a scientific microscope often requires a number of custom components and a significant time commitment. In our protocol, we have streamlined this process by implementation of a commercially available microscopy platform designed to accommodate the optical components necessary for a mmTIRFM. The mmTIRF system eliminates the need for machining custom parts by the end-user and facilitates optical alignment. Depending on the experience-level of the microscope builder, these time-savings and the following protocol can enable mmTIRF construction to be completed within two months. PMID:25188633

Design and construction of a multiwavelength, micromirror total internal reflectance fluorescence microscope.

PubMed

Larson, Joshua; Kirk, Matt; Drier, Eric A; O'Brien, William; MacKay, James F; Friedman, Larry J; Hoskins, Aaron A

2014-10-01

Colocalization single-molecule spectroscopy (CoSMoS) has proven to be a useful method for studying the composition, kinetics and mechanisms of complex cellular machines. Key to the technique is the ability to simultaneously monitor multiple proteins and/or nucleic acids as they interact with one another. Here we describe a protocol for constructing a CoSMoS micromirror total internal reflection fluorescence microscope (mmTIRFM). Design and construction of a scientific microscope often requires a number of custom components and a substantial time commitment. In our protocol, we have streamlined this process by implementation of a commercially available microscopy platform designed to accommodate the optical components necessary for an mmTIRFM. The mmTIRF system eliminates the need for machining custom parts by the end user and facilitates optical alignment. Depending on the experience level of the microscope builder, these time savings and the following protocol can enable mmTIRF construction to be completed within 2 months.

The Regional Hydrologic Extremes Assessment System: A software framework for hydrologic modeling and data assimilation

PubMed Central

Das, Narendra; Stampoulis, Dimitrios; Ines, Amor; Fisher, Joshua B.; Granger, Stephanie; Kawata, Jessie; Han, Eunjin; Behrangi, Ali

2017-01-01

The Regional Hydrologic Extremes Assessment System (RHEAS) is a prototype software framework for hydrologic modeling and data assimilation that automates the deployment of water resources nowcasting and forecasting applications. A spatially-enabled database is a key component of the software that can ingest a suite of satellite and model datasets while facilitating the interfacing with Geographic Information System (GIS) applications. The datasets ingested are obtained from numerous space-borne sensors and represent multiple components of the water cycle. The object-oriented design of the software allows for modularity and extensibility, showcased here with the coupling of the core hydrologic model with a crop growth model. RHEAS can exploit multi-threading to scale with increasing number of processors, while the database allows delivery of data products and associated uncertainty through a variety of GIS platforms. A set of three example implementations of RHEAS in the United States and Kenya are described to demonstrate the different features of the system in real-world applications. PMID:28545077

CSHM: Web-based safety and health monitoring system for construction management.

PubMed

Cheung, Sai On; Cheung, Kevin K W; Suen, Henry C H

2004-01-01

This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.

The Regional Hydrologic Extremes Assessment System: A software framework for hydrologic modeling and data assimilation.

PubMed

Andreadis, Konstantinos M; Das, Narendra; Stampoulis, Dimitrios; Ines, Amor; Fisher, Joshua B; Granger, Stephanie; Kawata, Jessie; Han, Eunjin; Behrangi, Ali

2017-01-01

The Regional Hydrologic Extremes Assessment System (RHEAS) is a prototype software framework for hydrologic modeling and data assimilation that automates the deployment of water resources nowcasting and forecasting applications. A spatially-enabled database is a key component of the software that can ingest a suite of satellite and model datasets while facilitating the interfacing with Geographic Information System (GIS) applications. The datasets ingested are obtained from numerous space-borne sensors and represent multiple components of the water cycle. The object-oriented design of the software allows for modularity and extensibility, showcased here with the coupling of the core hydrologic model with a crop growth model. RHEAS can exploit multi-threading to scale with increasing number of processors, while the database allows delivery of data products and associated uncertainty through a variety of GIS platforms. A set of three example implementations of RHEAS in the United States and Kenya are described to demonstrate the different features of the system in real-world applications.

Resilience, integrated development and family planning: building long-term solutions.

PubMed

De Souza, Roger-Mark

2014-05-01

For the many individuals and communities experiencing natural disasters and environmental degradation, building resilience means becoming more proficient at anticipating, preventing, recovering, and rebuilding following negative shocks and stresses. Development practitioners have been working to build this proficiency in vulnerable communities around the world for several decades. This article first examines the meaning of resilience as a component of responding to disasters and some of the key components of building resilience. It then summarises approaches to resilience developed by the Rockefeller and Packard Foundations, the Intergovernmental Panel on Climate Change, USAID and DFID, which show how family planning services can contribute to resilience. Next, it gives some examples of how family planning has been integrated into some current environment and development programmes. Finally, it describes how these integrated programmes have succeeded in helping communities to diversify livelihoods, bolster community engagement and resilience, build new governance structures, and position women as agents of change. Copyright © 2014 Reproductive Health Matters. Published by Elsevier Ltd. All rights reserved.

Direct 4D printing via active composite materials

PubMed Central

Ding, Zhen; Yuan, Chao; Peng, Xirui; Wang, Tiejun; Qi, H. Jerry; Dunn, Martin L.

2017-01-01

We describe an approach to print composite polymers in high-resolution three-dimensional (3D) architectures that can be rapidly transformed to a new permanent configuration directly by heating. The permanent shape of a component results from the programmed time evolution of the printed shape upon heating via the design of the architecture and process parameters of a composite consisting of a glassy shape memory polymer and an elastomer that is programmed with a built-in compressive strain during photopolymerization. Upon heating, the shape memory polymer softens, releases the constraint on the strained elastomer, and allows the object to transform into a new permanent shape, which can then be reprogrammed into multiple subsequent shapes. Our key advance, the markedly simplified creation of high-resolution complex 3D reprogrammable structures, promises to enable myriad applications across domains, including medical technology, aerospace, and consumer products, and even suggests a new paradigm in product design, where components are simultaneously designed to inhabit multiple configurations during service. PMID:28439560

Air Reserve Component: Key to the Air Force’s Future

DTIC Science & Technology

2013-03-01

REPORT TYPE STRATEGY RESEARCH PROJECT .33 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Air Reserve Component: Key to the Air Force’s...b. ABSTRACT UU c. THIS PAGE UU 19b. TELEPHONE NUMBER (Include area code) USAWC STRATEGY RESEARCH PROJECT...RAND Corporation, Prepared for the Office of Secretary of Defense, 2008), XV. 64 T.X. Hammes, "Offshore Control: A Proposed Strategy ," Infinity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Hirt, Evelyn H.; Coles, Garill A.

Advanced small modular reactors (AdvSMRs) can contribute to safe, sustainable, and carbon-neutral energy production. The economics of small reactors (including AdvSMRs) will be impacted by the reduced economy-of-scale savings when compared to traditional light water reactors. The most significant controllable element of the day-to-day costs involves operations and maintenance (O&M). Enhancing affordability of AdvSMRs through technologies that help control O&M costs will be critical to ensuring their practicality for wider deployment.A significant component of O&M costs is the management and mitigation of degradation of components due to their impact on planning maintenance activities and staffing levels. Technologies that help characterizemore » real-time risk of failure of key components are important in this context. Given the possibility of frequently changing AdvSMR plant configurations, approaches are needed to integrate three elements – advanced plant configuration information, equipment condition information, and risk monitors – to provide a measure of risk that is customized for each AdvSMR unit and support real-time decisions on O&M. This article describes an overview of ongoing research into diagnostics/prognostics and enhanced predictive risk monitors (ERM) for this purpose.« less

Classification of simple vegetation types using POLSAR image data

NASA Technical Reports Server (NTRS)

Freeman, A.

1993-01-01

Mapping basic vegetation or land cover types is a fairly common problem in remote sensing. Knowledge of the land cover type is a key input to algorithms which estimate geophysical parameters, such as soil moisture, surface roughness, leaf area index or biomass from remotely sensed data. In an earlier paper, an algorithm for fitting a simple three-component scattering model to POLSAR data was presented. The algorithm yielded estimates for surface scatter, double-bounce scatter and volume scatter for each pixel in a POLSAR image data set. In this paper, we show how the relative levels of each of the three components can be used as inputs to simple classifier for vegetation type. Vegetation classes include no vegetation cover (e.g. bare soil or desert), low vegetation cover (e.g. grassland), moderate vegetation cover (e.g. fully developed crops), forest and urban areas. Implementation of the approach requires estimates for the three components from all three frequencies available using the NASA/JPL AIRSAR, i.e. C-, L- and P-bands. The research described in this paper was carried out by the Jet Propulsion Laboratory, California Institute of Technology under a contract with the National Aeronautics and Space Administration.

Emerging themes in heterotrimeric G-protein signaling in plants.

PubMed

Pandey, Sona; Vijayakumar, Anitha

2018-05-01

Heterotrimeric G-proteins are key signaling components involved during the regulation of a multitude of growth and developmental pathways in all eukaryotes. Although the core proteins (Gα, Gβ, Gγ subunits) and their basic biochemistries are conserved between plants and non-plant systems, seemingly different inherent properties of specific components, altered wirings of G-protein network architectures, and the presence of novel receptors and effector proteins make plant G-protein signaling mechanisms somewhat distinct from the well-established animal paradigm. G-protein research in plants is getting a lot of attention recently due to the emerging roles of these proteins in controlling many agronomically important traits. New findings on both canonical and novel G-protein components and their conserved and unique signaling mechanisms are expected to improve our understanding of this important module in affecting critical plant growth and development pathways and eventually their utilization to produce plants for the future needs. In this review, we briefly summarize what is currently known in plant G-protein research, describe new findings and how they are changing our perceptions of the field, and discuss important issues that still need to be addressed. Copyright © 2018 Elsevier B.V. All rights reserved.

Analysis of splicing in vitro using extracts of Saccharomyces cerevisiae.

PubMed

Ares, Manuel

2013-10-01

In vitro splicing studies are a powerful means of investigating the requirements and mechanisms of action of the many components of the splicing apparatus. The ability to add and subtract components, purify activities, and reconstitute activity, as well as to expose the apparatus to chemical probes of various types, allows a far more mechanistically detailed view of the process to emerge than is available from genetic or in vivo studies alone. Two kinds of activities are assayed during in vitro splicing. The first concerns the chemical conversion of the substrate pre-mRNA into splicing intermediates and products and is usually visualized using a labeled substrate followed by separation on a denaturing gel. The second concerns the assembly of noncovalent complexes between the substrate and the myriad components of the splicing apparatus. This is also visualized using a labeled substrate, but the separation of complexes is achieved using native gel electrophoresis or gradient sedimentation. In this protocol, we describe the splicing reaction and its preparation for analysis by denaturing gels and native splicing complex gels. We also provide conditions for depletion of ATP, a critical cofactor that is hydrolyzed during numerous key steps in spliceosome assembly and splicing progression.

Investigation of a high speed data handling system for use with multispectral aircraft scanners

NASA Technical Reports Server (NTRS)

Kelly, W. L.; Meredith, B. D.

1978-01-01

A buffer memory data handling technique for use with multispectral aircraft scanners is presented which allows digital data generated at high data rates to be recorded on magnetic tape. A digital memory is used to temporarily store the data for subsequent recording at slower rates during the passive time of the scan line, thereby increasing the maximum data rate recording capability over real-time recording. Three possible implementations are described and the maximum data rate capability is defined in terms of the speed capability of the key hardware components. The maximum data rates can be used to define the maximum ground resolution achievable by a multispectral aircraft scanner using conventional data handling techniques.

Educational benefits of ISY - NASA's perspective

NASA Technical Reports Server (NTRS)

Owens, Frank C.; Mcgee, A. S.

1992-01-01

Education is a key component of the International Space Year (ISY) and NASA has taken on several roles in the development of ISY educational activities. ISY presents a unique opportunity for international cooperation in education and the global importance of science, math and technology across the educational spectrum has been emphasized. NASA monitors the progress of educational projects, develops educational activities and facilitates the development of such activities in both the public and private sectors. The Space Agency Forum on ISY (SAFISY), the international space and education program, space science and space communications in education are discussed and several educational programs are described. Current activities, distribution of products and future evaluation plans are discussed.

Information adaptive system of NEEDS. [of NASA End to End Data System

NASA Technical Reports Server (NTRS)

Howle, W. M., Jr.; Kelly, W. L.

1979-01-01

The NASA End-to-End Data System (NEEDS) program was initiated by NASA to improve significantly the state of the art in acquisition, processing, and distribution of space-acquired data for the mid-1980s and beyond. The information adaptive system (IAS) is a program element under NEEDS Phase II which addresses sensor specific processing on board the spacecraft. The IAS program is a logical first step toward smart sensors, and IAS developments - particularly the system components and key technology improvements - are applicable to future smart efforts. The paper describes the design goals and functional elements of the IAS. In addition, the schedule for IAS development and demonstration is discussed.

FPGA based charge acquisition algorithm for soft x-ray diagnostics system

NASA Astrophysics Data System (ADS)

Wojenski, A.; Kasprowicz, G.; Pozniak, K. T.; Zabolotny, W.; Byszuk, A.; Juszczyk, B.; Kolasinski, P.; Krawczyk, R. D.; Zienkiewicz, P.; Chernyshova, M.; Czarski, T.

2015-09-01

Soft X-ray (SXR) measurement systems working in tokamaks or with laser generated plasma can expect high photon fluxes. Therefore it is necessary to focus on data processing algorithms to have the best possible efficiency in term of processed photon events per second. This paper refers to recently designed algorithm and data-flow for implementation of charge data acquisition in FPGA. The algorithms are currently on implementation stage for the soft X-ray diagnostics system. In this paper despite of the charge processing algorithm is also described general firmware overview, data storage methods and other key components of the measurement system. The simulation section presents algorithm performance and expected maximum photon rate.

Geostatistics, remote sensing and precision farming.

PubMed

Mulla, D J

1997-01-01

Precision farming is possible today because of advances in farming technology, procedures for mapping and interpolating spatial patterns, and geographic information systems for overlaying and interpreting several soil, landscape and crop attributes. The key component of precision farming is the map showing spatial patterns in field characteristics. Obtaining information for this map is often achieved by soil sampling. This approach, however, can be cost-prohibitive for grain crops. Soil sampling strategies can be simplified by use of auxiliary data provided by satellite or aerial photo imagery. This paper describes geostatistical methods for estimating spatial patterns in soil organic matter, soil test phosphorus and wheat grain yield from a combination of Thematic Mapper imaging and soil sampling.

Preparing a scientific manuscript in Linux: Today's possibilities and limitations

PubMed Central

2011-01-01

Background Increasing number of scientists are enthusiastic about using free, open source software for their research purposes. Authors' specific goal was to examine whether a Linux-based operating system with open source software packages would allow to prepare a submission-ready scientific manuscript without the need to use the proprietary software. Findings Preparation and editing of scientific manuscripts is possible using Linux and open source software. This letter to the editor describes key steps for preparation of a publication-ready scientific manuscript in a Linux-based operating system, as well as discusses the necessary software components. This manuscript was created using Linux and open source programs for Linux. PMID:22018246

Older people's care experience in community and general hospitals: a comparative study.

PubMed

Green, John; Forster, Anne; Young, John; Small, Neil; Spink, Joanna

2008-07-01

Community hospitals are an important component of the post-acute care pathway for older people. The objective of this study was to describe and contrast patients' and carers' experiences of community and general hospitals. Interviews with patients and carers revealed similarities in the perceptions of care between the two settings. These included appreciation of staff sensitivity, a sense of security, encouragement of independence and lack of activity. The community hospital was appreciated for its location, atmosphere, accommodation, greater sense of freedom, quality of food and staff attitudes. UK health policy promotes the development of community hospitals. This should be progressed in a way that retains key strengths of the specific service they offer.

Energy conversion in natural and artificial photosynthesis.

PubMed

McConnell, Iain; Li, Gonghu; Brudvig, Gary W

2010-05-28

Modern civilization is dependent upon fossil fuels, a nonrenewable energy source originally provided by the storage of solar energy. Fossil-fuel dependence has severe consequences, including energy security issues and greenhouse gas emissions. The consequences of fossil-fuel dependence could be avoided by fuel-producing artificial systems that mimic natural photosynthesis, directly converting solar energy to fuel. This review describes the three key components of solar energy conversion in photosynthesis: light harvesting, charge separation, and catalysis. These processes are compared in natural and in artificial systems. Such a comparison can assist in understanding the general principles of photosynthesis and in developing working devices, including photoelectrochemical cells, for solar energy conversion. 2010 Elsevier Ltd. All rights reserved.

Optically interconnected phased arrays

NASA Technical Reports Server (NTRS)

Bhasin, Kul B.; Kunath, Richard R.

1988-01-01

Phased-array antennas are required for many future NASA missions. They will provide agile electronic beam forming for communications and tracking in the range of 1 to 100 GHz. Such phased arrays are expected to use several hundred GaAs monolithic integrated circuits (MMICs) as transmitting and receiving elements. However, the interconnections of these elements by conventional coaxial cables and waveguides add weight, reduce flexibility, and increase electrical interference. Alternative interconnections based on optical fibers, optical processing, and holography are under evaluation as possible solutions. In this paper, the current status of these techniques is described. Since high-frequency optical components such as photodetectors, lasers, and modulators are key elements in these interconnections, their performance and limitations are discussed.

Combustion pinhole-camera system

DOEpatents

Witte, A.B.

1982-05-19

A pinhole camera system is described utilizing a sealed optical-purge assembly which provides optical access into a coal combustor or other energy conversion reactors. The camera system basically consists of a focused-purge pinhole optical port assembly, a conventional TV vidicon receiver, an external, variable density light filter which is coupled electronically to the vidicon automatic gain control (agc). The key component of this system is the focused-purge pinhole optical port assembly which utilizes a purging inert gas to keep debris from entering the port and a lens arrangement which transfers the pinhole to the outside of the port assembly. One additional feature of the port assembly is that it is not flush with the interior of the combustor.

Self-Recovery Experiments in Extreme Environments Using a Field Programmable Transistor Array

NASA Technical Reports Server (NTRS)

Stoica, Adrian; Keymeulen, Didier; Arslan, Tughrul; Duong, Vu; Zebulum, Ricardo; Ferguson, Ian; Guo, Xin

2004-01-01

Temperature and radiation tolerant electronics, as well as long life survivability are key capabilities required for future NASA missions. Current approaches to electronics for extreme environments focus on component level robustness and hardening. However, current technology can only ensure very limited lifetime in extreme environments. This paper describes novel experiments that allow adaptive in-situ circuit redesign/reconfiguration during operation in extreme temperature and radiation environments. This technology would complement material/device advancements and increase the mission capability to survive harsh environments. The approach is demonstrated on a mixed-signal programmable chip (FPTA-2), which recovers functionality for temperatures until 28 C and with total radiation dose up to 250kRad.

Combustion pinhole camera system

DOEpatents

Witte, A.B.

1984-02-21

A pinhole camera system is described utilizing a sealed optical-purge assembly which provides optical access into a coal combustor or other energy conversion reactors. The camera system basically consists of a focused-purge pinhole optical port assembly, a conventional TV vidicon receiver, an external, variable density light filter which is coupled electronically to the vidicon automatic gain control (agc). The key component of this system is the focused-purge pinhole optical port assembly which utilizes a purging inert gas to keep debris from entering the port and a lens arrangement which transfers the pinhole to the outside of the port assembly. One additional feature of the port assembly is that it is not flush with the interior of the combustor. 2 figs.

CRUCIFORM CONTROL ROD JOINT

DOEpatents

Thorp, A.G. II

1962-08-01

An invention is described which relates to nuclear reactor control rod components and more particularly to a joint between cruciform control rod members and cruciform control rod follower members. In one embodiment this invention provides interfitting crossed arms at adjacent ends of a control rod and its follower in abutting relation. This holds the members against relative opposite longitudinal movement while a compression member keys the arms against relative opposite rotation around a common axis. Means are also provided for centering the control rod and its follower on a common axis and for selectively releasing the control rod from its follower for the insertion of a replacement of the control rod and reuse of the follower. (AEC)

Sentinel-4: the geostationary component of the GMES atmosphere monitoring missions

NASA Astrophysics Data System (ADS)

Bazalgette Courrèges-Lacoste, G.; Arcioni, M.; Meijer, Y.; Bézy, J.-L.; Bensi, P.; Langen, J.

2017-11-01

The implementation of operational atmospheric composition monitoring missions is foreseen in the context of the Global Monitoring for Environment and Security (GMES) initiative. Sentinel-4 will address the geostationary observations and Sentinel-5 the low Earth orbit ones. The two missions are planned to be launched on-board Eumetsat's Meteosat Third Generation (MTG) and Post-EPS satellites, respectively. This paper presents an overview of the GMES Sentinel- 4 mission, which has been assessed at Phase-0 level. It describes the key requirements and outlines the main aspects of the candidate implementation concepts available at completion of Phase-0. The paper will particularly focus on the observation mode, the estimated performance and the related technology developments.

Optical fiber sensors for high temperature harsh environment applications

NASA Astrophysics Data System (ADS)

Xiao, Hai; Wei, Tao; Lan, Xinwei; Zhang, Yinan; Duan, Hongbiao; Han, Yukun; Tsai, Hai-Lung

2010-04-01

This paper summarizes our recent research progresses in developing optical fiber harsh environment sensors for various high temperature harsh environment sensing applications such as monitoring of the operating conditions in a coal-fired power plant and in-situ detection of key gas components in coal-derived syngas. The sensors described in this paper include a miniaturized inline fiber Fabry-Perot interferometer (FPI) fabricated by one-step fs laser micromachining, a long period fiber grating (LPFG) and a fiber inline core-cladding mode interferometer (CMMI) fabricated by controlled CO2 laser irradiations. Their operating principles, fabrication methods, and applications for measurement of various physical and chemical parameters in a high temperature and high pressure coexisting harsh environment are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuramochi, Hikaru; Takeuchi, Satoshi; Tahara, Tahei, E-mail: tahei@riken.jp

We describe details of the setup for time-resolved impulsive stimulated Raman spectroscopy (TR-ISRS). In this method, snapshot molecular vibrational spectra of the photoreaction transients are captured via time-domain Raman probing using ultrashort pulses. Our instrument features transform-limited sub-7-fs pulses to impulsively excite and probe coherent nuclear wavepacket motions, allowing us to observe vibrational fingerprints of transient species from the terahertz to 3000-cm{sup −1} region with high sensitivity. Key optical components for the best spectroscopic performance are discussed. The TR-ISRS measurements for the excited states of diphenylacetylene in cyclohexane are demonstrated, highlighting the capability of our setup to track femtosecond dynamicsmore » of all the Raman-active fundamental molecular vibrations.« less

A model for the electronic support of practice-based research networks.

PubMed

Peterson, Kevin A; Delaney, Brendan C; Arvanitis, Theodoros N; Taweel, Adel; Sandberg, Elisabeth A; Speedie, Stuart; Richard Hobbs, F D

2012-01-01

The principal goal of the electronic Primary Care Research Network (ePCRN) is to enable the development of an electronic infrastructure to support clinical research activities in primary care practice-based research networks (PBRNs). We describe the model that the ePCRN developed to enhance the growth and to expand the reach of PBRN research. Use cases and activity diagrams were developed from interviews with key informants from 11 PBRNs from the United States and United Kingdom. Discrete functions were identified and aggregated into logical components. Interaction diagrams were created, and an overall composite diagram was constructed describing the proposed software behavior. Software for each component was written and aggregated, and the resulting prototype application was pilot tested for feasibility. A practical model was then created by separating application activities into distinct software packages based on existing PBRN business rules, hardware requirements, network requirements, and security concerns. We present an information architecture that provides for essential interactions, activities, data flows, and structural elements necessary for providing support for PBRN translational research activities. The model describes research information exchange between investigators and clusters of independent data sites supported by a contracted research director. The model was designed to support recruitment for clinical trials, collection of aggregated anonymous data, and retrieval of identifiable data from previously consented patients across hundreds of practices. The proposed model advances our understanding of the fundamental roles and activities of PBRNs and defines the information exchange commonly used by PBRNs to successfully engage community health care clinicians in translational research activities. By describing the network architecture in a language familiar to that used by software developers, the model provides an important foundation for the development of electronic support for essential PBRN research activities.

Near or far? It depends on my impression: moral information and spatial behavior in virtual interactions.

PubMed

Iachini, Tina; Pagliaro, Stefano; Ruggiero, Gennaro

2015-10-01

Near body distance is a key component of action and social interaction. Recent research has shown that peripersonal space (reachability-distance for acting with objects) and interpersonal space (comfort-distance for interacting with people) share common mechanisms and reflect the social valence of stimuli. The social psychological literature has demonstrated that information about morality is crucial because it affects impression formation and the intention to approach-avoid others. Here we explore whether peripersonal/interpersonal spaces are modulated by moral information. Thirty-six participants interacted with male/female virtual confederates described by moral/immoral/neutral sentences. The modulation of body space was measured by reachability-distance and comfort-distance while participants stood still or walked toward virtual confederates. Results showed that distance expanded with immorally described confederates and contracted with morally described confederates. This pattern was present in both spaces, although it was stronger in comfort-distance. Consistent with an embodied cognition approach, the findings suggest that high-level socio-cognitive processes are linked to sensorimotor-spatial processes. Copyright © 2015. Published by Elsevier B.V.

Empirical Analysis of Optical Attenuator Performance in Quantum Key Distribution Systems Using a Particle Model

DTIC Science & Technology

2012-03-01

EMPIRICAL ANALYSIS OF OPTICAL ATTENUATOR PERFORMANCE IN QUANTUM KEY DISTRIBUTION SYSTEMS USING A...DISTRIBUTION IS UNLIMITED AFIT/GCS/ENG/12-01 EMPIRICAL ANALYSIS OF OPTICAL ATTENUATOR PERFORMANCE IN QUANTUM KEY DISTRIBUTION SYSTEMS USING ...challenging as the complexity of actual implementation specifics are considered. Two components common to most quantum key distribution

Space Environment Testing of Photovoltaic Array Systems at NASA's Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Schneider, Todd A.; Vaughn, Jason A.; Wright, Kenneth H., Jr.; Phillips, Brandon S.

2015-01-01

CubeSats, Communication Satellites, and Outer Planet Science Satellites all share one thing in common: Mission success depends on maintaining power in the harsh space environment. For a vast majority of satellites, spacecraft power is sourced by a photovoltaic (PV) array system. Built around PV cells, the array systems also include wiring, substrates, connectors, and protection diodes. Each of these components must function properly throughout the mission in order for power production to remain at nominal levels. Failure of even one component can lead to a crippling loss of power. To help ensure PV array systems do not suffer failures on-orbit due to the space environment, NASA's Marshall Space Flight Center (MSFC) has developed a wide ranging test and evaluation capability. Key elements of this capability include: Testing: a. Ultraviolet (UV) Exposure b. Charged Particle Radiation (Electron and Proton) c. Thermal Cycling d. Plasma and Beam Environments Evaluation: a. Electrostatic Discharge (ESD) Screening b. Optical Inspection and easurement c. PV Power Output including Large Area Pulsed Solar Simulator (LAPSS) measurements This paper will describe the elements of the space environment which particularly impact PV array systems. MSFC test capabilities will be described to show how the relevant space environments can be applied to PV array systems in the laboratory. A discussion of MSFC evaluation capabilities will also be provided. The sample evaluation capabilities offer test engineers a means to quantify the effects of the space environment on their PV array system or component. Finally, examples will be shown of the effects of the space environment on actual PV array materials tested at MSFC.

An investigation into closed-loop treatment of neurological disorders based on sensing mitochondrial dysfunction.

PubMed

Adams, Scott D; Kouzani, Abbas Z; Tye, Susannah J; Bennet, Kevin E; Berk, Michael

2018-02-13

Dynamic feedback based closed-loop medical devices offer a number of advantages for treatment of heterogeneous neurological conditions. Closed-loop devices integrate a level of neurobiological feedback, which allows for real-time adjustments to be made with the overarching aim of improving treatment efficacy and minimizing risks for adverse events. One target which has not been extensively explored as a potential feedback component in closed-loop therapies is mitochondrial function. Several neurodegenerative and psychiatric disorders including Parkinson's disease, Major Depressive disorder and Bipolar disorder have been linked to perturbations in the mitochondrial respiratory chain. This paper investigates the potential to monitor this mitochondrial function as a method of feedback for closed-loop neuromodulation treatments. A generic model of the closed-loop treatment is developed to describe the high-level functions of any system designed to control neural function based on mitochondrial response to stimulation, simplifying comparison and future meta-analysis. This model has four key functional components including: a sensor, signal manipulator, controller and effector. Each of these components are described and several potential technologies for each are investigated. While some of these candidate technologies are quite mature, there are still technological gaps remaining. The field of closed-loop medical devices is rapidly evolving, and whilst there is a lot of interest in this area, widespread adoption has not yet been achieved due to several remaining technological hurdles. However, the significant therapeutic benefits offered by this technology mean that this will be an active area for research for years to come.

Blood and bombs: the demand and use of blood following the London Bombings of 7 July 2005--a retrospective review.

PubMed

Glasgow, S M; Allard, S; Doughty, H; Spreadborough, P; Watkins, E

2012-08-01

Mass casualty events (MCE) present health systems with a sudden demand on key services. The overall objective of this study was to describe the experience of the National Blood Service (NBS) following the largest UK MCE in recent times. Data was collated from the NBS database and directly from the hospitals involved. All data was collected immediately following the event and included: all blood components requested, issued and transfused in relation to the bombings, blood stock levels at the time and the injury profiles of the casualties transfused. The total NBS order from hospitals for the event was 1455 units of blood components. All requests were fulfilled, this included: 978 units of red cells (RC), 36 doses of platelets, 141 units of fresh frozen plasma (FFP) and 300 doses of cryoprecipitate. The amount of blood ordered was three times that initially used and the total number of RC transfused in treating all victims from admission to discharge was approximately 440 units. The greatest use of blood components was for those casualties who had sustained traumatic amputations amongst their injury profile. Published data with which to compare these results is lacking, although the RC use was similar to the initial mean individual usage described in previous military and civilian bombings. The overall implication for any blood service remains, there is now likely to be a far greater demand for plasma, platelets and cryoprecipitate in any future incidents involving victims suffering major haemorrhage. © 2012 The Authors. Transfusion Medicine © 2012 British Blood Transfusion Society.

Unravelling Responses for the Canadian National Seismic Network

NASA Astrophysics Data System (ADS)

Mulder, T. L.

2009-12-01

There are a number of attendant difficulties any network must deal with that range from defining the transfer function to instrument naming conventions to choices of final local file format representation. These choices ultimately result in the ease of conversion to other data formats and therefore directly impact useability. In particular, the ease of data exhange and use of established software that is dependent on standard data types is impacted. This becomes particularly critical with large (terabyte) dataset processing and when integrating external datasets into analysis procedures. Transfer functions, often referred to as instrument responses, are a key component in describing instrumentation. The transfer function describes the complete response of the seismic system. The seismic system is designed to be a linear system that can be decomposed into discrete components. Analogue or digital convolution can be represented as multiplication in the frequency domain. The two basic elements of a seismic system are the sensor and datalogger. The analogue sensor can be represented mathmatically as poles and zeroes. The datalogger can be further broken down into its discrete analogue and digital components: the preamp, A/D converter, and fir filters. The Canadian seismic network (CNSN) digitizers have an additional complication. To save telemetry band-width, the 32 bit signal from the digitizer has a transmission gain removed. The transmission gain (txgain) represents the number of the least significant bits truncated from the sample (2^txgain) after which the data is compressed and transmitted. While telemetry band-width is not the issue it was, now that many sites have ip connectivity, this user programmable transmission gain is still in use and can vary from station to station. The processes receiving the transmitted data do not restore the pre-transmission scaling, consequently the archived waveform files can vary in bit weight over time from station to station depending on the value of the transmission gain. Consequently the transmission gain must be factored into the transfer function. This presentation describes the process for generating the transfer function based on the constituent components discussed here. A matlab routine run on the database generates the transfer function plots for the network.

Known plaintext attack on double random phase encoding using fingerprint as key and a method for avoiding the attack.

PubMed

Tashima, Hideaki; Takeda, Masafumi; Suzuki, Hiroyuki; Obi, Takashi; Yamaguchi, Masahiro; Ohyama, Nagaaki

2010-06-21

We have shown that the application of double random phase encoding (DRPE) to biometrics enables the use of biometrics as cipher keys for binary data encryption. However, DRPE is reported to be vulnerable to known-plaintext attacks (KPAs) using a phase recovery algorithm. In this study, we investigated the vulnerability of DRPE using fingerprints as cipher keys to the KPAs. By means of computational experiments, we estimated the encryption key and restored the fingerprint image using the estimated key. Further, we propose a method for avoiding the KPA on the DRPE that employs the phase retrieval algorithm. The proposed method makes the amplitude component of the encrypted image constant in order to prevent the amplitude component of the encrypted image from being used as a clue for phase retrieval. Computational experiments showed that the proposed method not only avoids revealing the cipher key and the fingerprint but also serves as a sufficiently accurate verification system.

Autoshaping the pigeon's gape response: acquisition and topography as a function of reinforcer type and magnitude.

PubMed Central

Allan, R W; Zeigler, H P

1994-01-01

The pigeon's key-pecking response is experimentally dissociable into transport (head movement) and gape (jaw movement) components. During conditioning of the key-pecking response, both components come under the control of the conditioned stimulus. To study the acquisition of gape conditioned responses and to clarify the contribution of unconditioned stimulus (reinforcer) variables to the form of the response, gape and key-contact responses were recorded during an autoshaping procedure and reinforcer properties were systematically varied. One group of 8 pigeons was food deprived and subgroups of 2 birds each were exposed to four different pellet sizes as reinforcers, each reinforcer signaled by a keylight conditioned stimulus. A second group was water deprived and received water reinforcers paired with the conditioned stimulus. Water- or food-deprived control groups received appropriate water or food reinforcers that were randomly delivered with respect to the keylight stimulus. Acquisition of the conditioned gape response frequently preceded key-contact responses, and gape conditioned responses were generally elicited at higher rates than were key contacts. The form of the conditioned gape was similar to, but not identical with, the form of the unconditioned gape. The gape component is a critical topographical feature of the conditioned key peck, a sensitive measure of conditioning during autoshaping, and an important source of the observed similarities in the form of conditioned and consummatory responses. PMID:7964365

Autoshaping the pigeon's gape response: acquisition and topography as a function of reinforcer type and magnitude.

PubMed

Allan, R W; Zeigler, H P

1994-09-01

The pigeon's key-pecking response is experimentally dissociable into transport (head movement) and gape (jaw movement) components. During conditioning of the key-pecking response, both components come under the control of the conditioned stimulus. To study the acquisition of gape conditioned responses and to clarify the contribution of unconditioned stimulus (reinforcer) variables to the form of the response, gape and key-contact responses were recorded during an autoshaping procedure and reinforcer properties were systematically varied. One group of 8 pigeons was food deprived and subgroups of 2 birds each were exposed to four different pellet sizes as reinforcers, each reinforcer signaled by a keylight conditioned stimulus. A second group was water deprived and received water reinforcers paired with the conditioned stimulus. Water- or food-deprived control groups received appropriate water or food reinforcers that were randomly delivered with respect to the keylight stimulus. Acquisition of the conditioned gape response frequently preceded key-contact responses, and gape conditioned responses were generally elicited at higher rates than were key contacts. The form of the conditioned gape was similar to, but not identical with, the form of the unconditioned gape. The gape component is a critical topographical feature of the conditioned key peck, a sensitive measure of conditioning during autoshaping, and an important source of the observed similarities in the form of conditioned and consummatory responses.

TPV Power Source Using Infrared-Sensitive Cells with Commercially Available Radiant Tube Burner

NASA Astrophysics Data System (ADS)

Fraas, Lewis; Minkin, Leonid; Hui, She; Avery, James; Howells, Christopher

2004-11-01

Over the last several years, JX Crystals has invented and systematically developed the key components for thermophotovoltaic systems. These key components include GaSb infrared sensitive cells, high power density shingle circuits, dielectric filters, and hydrocarbon-fueled radiant tube burners. Most recently, we invented and demonstrated an antireflection (AR)-coated tungsten IR emitter which when integrated with the other key components should make TPV systems with efficiencies over 10% practical. However, the use of the AR tungsten emitter requires an oxygen-free hermetic seal enclosure. During a 2003 Small Business Innovative Research (SBIR) Phase I contract, we integrated a tungsten emitter foil and a commercial SiC radiant tube burner within an emitter thermos and successfully demonstrated its operation at high temperature. We also designed a complete stand alone 500 W TPV generator. During the upcoming SBIR Phase II, we plan to implement this design in hardware.

Northwest Africa 773: Lunar Mare Breccia with a Shallow-formed Olivine-Cumulate Component, Very-Low-Ti Heritage, and a KREEP Connection

NASA Technical Reports Server (NTRS)

Jolliff, B. L.; Korotev, R. L.; Zeigler, R. A.; Floss, C.; Haskin, L. A.

2003-01-01

Northwest Africa 773 is one of the more unusual lunar meteorites found in recent years because it contains a prominent clast lithology, which appears to be an olivine-rich cumulate and because it is a very-low-Ti (VLT) mare breccia with relatively high incompatible-trace-element concentrations and LREE/HREE enrichment. A lunar origin was verified by Fagan and coworkers on the basis of noble-gas contents, oxygen isotopes, and mineral compositions. Fagan et al. described two lithologies: (1) heterolithic impact breccia with a regolith component and (2) cumulus olivine gabbronorite. Here, we refer to these as the breccia (Bx) lithology and the olivine-cumulate (OC) lithology. The impact breccia components are predominantly volcanic (basaltic), and, in this context, the occurrence of the cumulus lithology is especially significant: is it related to the volcanic components or does it represent a deep-seated rock entrained by the basaltic magma as it rose to the surface? Elevated incompatible-element concentrations with more or less KREEP-like inter-element ratios and very-low-Ti concentrations distinguish both lithologies of this meteorite from Apollo mare basalts. Here, we summarize key compositional information (bulk and mineral), especially related to the OC lithology, to show that it formed at shallow depth and comes from a VLT ultramafic precursor that mixed with a KREEP-like trace-element component deep in the crust or upper mantle.

Low cost, small form factor, and integration as the key features for the optical component industry takeoff

NASA Astrophysics Data System (ADS)

Schiattone, Francesco; Bonino, Stefano; Gobbi, Luigi; Groppi, Angelamaria; Marazzi, Marco; Musio, Maurizio

2003-04-01

In the past the optical component market has been mainly driven by performances. Today, as the number of competitors has drastically increased, the system integrators have a wide range of possible suppliers and solutions giving them the possibility to be more focused on cost and also on footprint reduction. So, if performances are still essential, low cost and Small Form Factor issues are becoming more and more crucial in selecting components. Another evolution in the market is the current request of the optical system companies to simplify the supply chain in order to reduce the assembling and testing steps at system level. This corresponds to a growing demand in providing subassemblies, modules or hybrid integrated components: that means also Integration will be an issue in which all the optical component companies will compete to gain market shares. As we can see looking several examples offered by electronic market, to combine low cost and SFF is a very challenging task but Integration can help in achieving both features. In this work we present how these issues could be approached giving examples of some advanced solutions applied to LiNbO3 modulators. In particular we describe the progress made on automation, new materials and low cost fabrication methods for the parts. We also introduce an approach in integrating optical and electrical functionality on LiNbO3 modulators including RF driver, bias control loop, attenuator and photodiode integrated in a single device.

Towards vertical integration in general practice education: literature review and discussion paper.

PubMed

O'Regan, A; Culhane, A; Dunne, C; Griffin, M; Meagher, D; McGrath, D; O'Dwyer, P; Cullen, W

2013-09-01

Medical education policy in Ireland has enabled an increase in undergraduate and postgraduate education activity in general practice. Internationally, 'vertical integration in general practice education' is suggested as a key strategy to support the implementation of this policy development. To review the emerging literature on vertical integration in GP education, specifically to define the concept of 'vertical integration' with regard to education in general practice and to describe its benefits and challenges. We searched 'Pubmed', 'Academic Search Complete', 'Google', and 'MEDLINE' databases using multiple terms related to 'vertical integration' and 'general practice education' for relevant articles published since 2001. Discussion papers, reports, policy documents and position statements were identified from reference lists and retrieved through internet searches. The key components of 'vertical integration' in GP education include continuous educational pathway, all stages in GP education, supporting the continuing educational/professional development needs of learners at each stage and effective curriculum planning and delivery. Many benefits (for GPs, learners and the community) and many challenges (for GPs/practices, learners and GPs in training) have been described. Characteristics of successful implementation include role sharing and collaborative organisational structures. Recent developments in medical education in Ireland, such as the increase in medical school clinical placements in general practice and postgraduate GP training and the introduction of new competence assurance requirements offer an important opportunity to further inform how vertical integration can support increased educational activity in general practice. Describing this model, recognising its benefits and challenges and supporting its implementation in practice are priorities for medical education in Ireland.

Albumin Antioxidant Response to Stress in Diabetic Nephropathy Progression

PubMed Central

Medina-Navarro, Rafael; Corona-Candelas, Itzia; Barajas-González, Saúl; Díaz-Flores, Margarita; Durán-Reyes, Genoveva

2014-01-01

Background A new component of the protein antioxidant capacity, designated Response Surplus (RS), was recently described. A major feature of this component is the close relationship between protein antioxidant capacity and molecular structure. Oxidative stress is associated with renal dysfunction in patients with renal failure, and plasma albumin is the target of massive oxidation in nephrotic syndrome and diabetic nephropathy. The aim of the present study was to explore the albumin redox state and the RS component of human albumin isolated from diabetic patients with progressive renal damage. Methods/Principal Findings Serum aliquots were collected and albumin isolated from 125 diabetic patients divided into 5 groups according to their estimated glomerular filtration rate (GFR). In addition to clinical and biochemical variables, the albumin redox state, including antioxidant capacity, thiol group content, and RS component, were evaluated. The albumin antioxidant capacity and thiol group content were reciprocally related to the RS component in association with GFR reduction. The GFR decline and RS component were significantly negatively correlated (R = –0.83, p<0.0001). Age, creatinine, thiol groups, and antioxidant capacity were also significantly related to the GFR decline (R = –0.47, p<0.001; R = –0.68, p<0.0001; R = 0.44, p<0.001; and R = 0.72, p<0.0001). Conclusion/Significance The response of human albumin to stress in relation to the progression of diabetic renal disease was evaluated. The findings confirm that the albumin molecular structure is closely related to its redox state, and is a key factor in the progression of diabetes nephropathy. PMID:25187963

Comparing Server Energy Use and Efficiency Using Small Sample Sizes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coles, Henry C.; Qin, Yong; Price, Phillip N.

This report documents a demonstration that compared the energy consumption and efficiency of a limited sample size of server-type IT equipment from different manufacturers by measuring power at the server power supply power cords. The results are specific to the equipment and methods used. However, it is hoped that those responsible for IT equipment selection can used the methods described to choose models that optimize energy use efficiency. The demonstration was conducted in a data center at Lawrence Berkeley National Laboratory in Berkeley, California. It was performed with five servers of similar mechanical and electronic specifications; three from Intel andmore » one each from Dell and Supermicro. Server IT equipment is constructed using commodity components, server manufacturer-designed assemblies, and control systems. Server compute efficiency is constrained by the commodity component specifications and integration requirements. The design freedom, outside of the commodity component constraints, provides room for the manufacturer to offer a product with competitive efficiency that meets market needs at a compelling price. A goal of the demonstration was to compare and quantify the server efficiency for three different brands. The efficiency is defined as the average compute rate (computations per unit of time) divided by the average energy consumption rate. The research team used an industry standard benchmark software package to provide a repeatable software load to obtain the compute rate and provide a variety of power consumption levels. Energy use when the servers were in an idle state (not providing computing work) were also measured. At high server compute loads, all brands, using the same key components (processors and memory), had similar results; therefore, from these results, it could not be concluded that one brand is more efficient than the other brands. The test results show that the power consumption variability caused by the key components as a group is similar to all other components as a group. However, some differences were observed. The Supermicro server used 27 percent more power at idle compared to the other brands. The Intel server had a power supply control feature called cold redundancy, and the data suggest that cold redundancy can provide energy savings at low power levels. Test and evaluation methods that might be used by others having limited resources for IT equipment evaluation are explained in the report.« less

Perception of touch quality in piano tones.

PubMed

Goebl, Werner; Bresin, Roberto; Fujinaga, Ichiro

2014-11-01

Both timbre and dynamics of isolated piano tones are determined exclusively by the speed with which the hammer hits the strings. This physical view has been challenged by pianists who emphasize the importance of the way the keyboard is touched. This article presents empirical evidence from two perception experiments showing that touch-dependent sound components make sounds with identical hammer velocities but produced with different touch forms clearly distinguishable. The first experiment focused on finger-key sounds: musicians could identify pressed and struck touches. When the finger-key sounds were removed from the sounds, the effect vanished, suggesting that these sounds were the primary identification cue. The second experiment looked at key-keyframe sounds that occur when the key reaches key-bottom. Key-bottom impact was identified from key motion measured by a computer-controlled piano. Musicians were able to discriminate between piano tones that contain a key-bottom sound from those that do not. However, this effect might be attributable to sounds associated with the mechanical components of the piano action. In addition to the demonstrated acoustical effects of different touch forms, visual and tactile modalities may play important roles during piano performance that influence the production and perception of musical expression on the piano.

The Impact of Armor on the Design, Utilization and Survivability of Ground Vehicles: The History of Armor Development and Use

DTIC Science & Technology

2012-09-01

control functions. Components that are included in this category include the steering column / linkages as well as brakes . D. FIREPOWER COMPONENTS...COMPONENTS: STEERING AND BRAKES ......................48 D. FIREPOWER COMPONENTS: TURRET AND ARMAMENT .............49 E. PROTECTION COMPONENTS: HULL AND...Key Functional Area Propulsion Powertrain (Engine / Transmission) Tracks / Wheels Control Steering Brakes / Suspension Firepower Turret Armament

New taxa of Hawaiian corticioid fungi are described with keys to Crustoderma, Radulomyces, and Scopuloides

Treesearch

Robert L. Gilbertson

2003-01-01

Four new species of corticioid fungi from Hawaii are described and illustrated. The new genus Hemmesomyces is described to accommodate the new species H. puauluensis. Radulomyces tantalusensis, Crustoderma fuscatum and Scopuloides magnacystidiata also are described as new. In addition, the new combination Crustoderma vulcanense is proposed. Keys to the species of...

A drug procurement, storage and distribution model in public hospitals in a developing country.

PubMed

Kjos, Andrea L; Binh, Nguyen Thanh; Robertson, Caitlin; Rovers, John

2016-01-01

There is growing interest in pharmaceutical supply chains and distribution of medications at national and international levels. Issues of access and efficiency have been called into question. However, evaluations of system outcomes are not possible unless there are contextual data to describe the systems in question. Available guidelines provided by international advisory bodies such as the World Health Organization and the International Pharmacy Federation may be useful for developing countries like Vietnam when seeking to describe the pharmaceutical system. The purpose of this study was to describe a conceptual model for drug procurement, storage, and distribution in four government-owned hospitals in Vietnam. This study was qualitative and used semi-structured interviews with key informants from within the Vietnamese pharmaceutical system. Translated transcriptions were used to conduct a content analysis of the data. A conceptual model for the Vietnamese pharmaceutical system was described using structural and functional components. This model showed that in Vietnam, governmental policy influences the structural framework of the system, but allows for flexibility at the functional level of practice. Further, this model can be strongly differentiated from the models described by international advisory bodies. This study demonstrates a method for health care systems to describe their own models of drug distribution to address quality assurance, systems design and benchmarking for quality improvement. Copyright © 2016 Elsevier Inc. All rights reserved.

Differences in fatigue severity in a sample of adult cancer patients.

PubMed

Gonzalez, Velda J; Tofthagen, Cindy S; Chen, Xusheng; Pedro, Elsa; Saligan, Leorey N

2017-04-05

To describe differences in fatigue severity in a sample of adult Puerto Rican patients during and postcancer treatments. Hispanics, including Puerto Ricans, are an understudied population who are under-represented in clinical trials, especially in symptom research. Although symptom management is a clinical priority in oncology care, treatment-related differences in Puerto Rican cancer patients' report of fatigue severity have not been well described. A cross-sectional survey was conducted from data of self-report of 138 Puerto Rican patients during and postcancer treatments at two ambulatory facilities located in San Juan, Puerto Rico. Fatigue severity was assessed using the Fatigue subscale from the Functional Assessment of Cancer Therapy-Fatigue quality of life questionnaire Spanish version. Differences in fatigue severity across type of treatment (radiation therapy, chemotherapy, combined radiation chemotherapy and post-treatment) were evaluated using nonparametric (Kruskal-Wallis and Mann-Whitney test) statistical tests. The majority of the participants had prostate (33%) and breast (32%) cancers and were receiving radiation therapy (43%) or chemotherapy (28%). The Kruskal-Wallis test showed that there was a statistically significant difference in fatigue scores between the different four treatment conditions, χ 2 (3) = 39.1, p = .001 with patients on combined radiation chemotherapy or chemotherapy alone experiencing more severe fatigue. Findings from the current study suggest that type of treatment is a key component of the symptom burden of fatigue among the Puerto Rican oncology population. Specially, patients receiving combined therapy or chemotherapy alone were at increased risk for experiencing severe fatigue, compared to radiation therapy and post-treatment patients. With the worldwide increase in migration of Puerto Rican families, nurses need to recognise that type of treatment is a key component of the symptom burden of fatigue among the Puerto Rican population. The results of this study will improve understanding of treatment-related fatigue to identify therapeutic targets and improve quality of life of patients. © 2017 John Wiley & Sons Ltd.

From innovation to implementation: the long and winding road.

PubMed

Galavotti, Christine; Kuhlmann, Anne K Sebert; Kraft, Joan Marie; Harford, Nicola; Petraglia, Joseph

2008-06-01

Building on theory and past research, in early 2000 scientists in the Division of Reproductive Health developed a prevention innovation for CDC's Global AIDS Program for use in countries severely affected by the HIV/AIDS epidemic. This innovative program model is called MARCH: Modeling and Reinforcement to Combat HIV/AIDS (Galavotti et al. Am J Public Health 91:1602-1607, 2001). MARCH promotes behavioral changes that reduce the risk of HIV infection and creates normative environments that sustain these changes through two key program components: entertainment-education using mass media, particularly long-running radio serial dramas, and reinforcement activities at the community level. Using the framework developed by Wandersman et al. (Am J Commun Psychol, 41(3-4), 2008), we describe the key elements of the MARCH prevention innovation and outline how we support its adaptation and implementation. We focus on the following questions: How do we get from an innovative model to effective program implementation in the field? How do we support implementation with fidelity when adaptation is required? And, once implemented, can we demonstrate fidelity of the adaptation to the original program model? Because our program model requires local adaptation for every instance of implementation, we suggest a potential enhancement to the Interactive Systems Framework-support for adaptation of the innovation-as part of the Prevention Support System. In this paper we describe how we supported adaptation of the radio serial drama component for unique contexts in several African countries. We focus attention on the tools and trainings we developed to build innovation specific capacity for implementation, including capacities for adaptation. We then present results of a qualitative analysis of scripts from the MARCH radio serial drama in Zimbabwe to assess the adapted program's fidelity to the original design of the innovation. Finally, we discuss lessons learned and explore implications for the field.

ROLE OF DOM PHOTOREACTIONS IN CONTROLLING UV EXPOSURE OF CORAL ASSEMBLAGES IN THE FLORIDA KEYS

EPA Science Inventory

Recent studies have indicated that solar LTV radiation is a significant stressor of coral assemblages in tropical and subtropical marine environments. Here evidence is presented that UV exposure of coral reefs in the Florida Keys near Key West is controlled by the colored compone...

Household Food Waste: Multivariate Regression and Principal Components Analyses of Awareness and Attitudes among U.S. Consumers

PubMed Central

2016-01-01

We estimate models of consumer food waste awareness and attitudes using responses from a national survey of U.S. residents. Our models are interpreted through the lens of several theories that describe how pro-social behaviors relate to awareness, attitudes and opinions. Our analysis of patterns among respondents’ food waste attitudes yields a model with three principal components: one that represents perceived practical benefits households may lose if food waste were reduced, one that represents the guilt associated with food waste, and one that represents whether households feel they could be doing more to reduce food waste. We find our respondents express significant agreement that some perceived practical benefits are ascribed to throwing away uneaten food, e.g., nearly 70% of respondents agree that throwing away food after the package date has passed reduces the odds of foodborne illness, while nearly 60% agree that some food waste is necessary to ensure meals taste fresh. We identify that these attitudinal responses significantly load onto a single principal component that may represent a key attitudinal construct useful for policy guidance. Further, multivariate regression analysis reveals a significant positive association between the strength of this component and household income, suggesting that higher income households most strongly agree with statements that link throwing away uneaten food to perceived private benefits. PMID:27441687

Design, Manufacture, and Experimental Serviceability Validation of ITER Blanket Components

NASA Astrophysics Data System (ADS)

Leshukov, A. Yu.; Strebkov, Yu. S.; Sviridenko, M. N.; Safronov, V. M.; Putrik, A. B.

2017-12-01

In 2014, the Russian Federation and the ITER International Organization signed two Procurement Arrangements (PAs) for ITER blanket components: 1.6.P1ARF.01 "Blanket First Wall" of February 14, 2014, and 1.6.P3.RF.01 "Blanket Module Connections" of December 19, 2014. The first PA stipulates development, manufacture, testing, and delivery to the ITER site of 179 Enhanced Heat Flux (EHF) First Wall (FW) Panels intended for withstanding the heat flux from the plasma up to 4.7MW/m2. Two Russian institutions, NIIEFA (Efremov Institute) and NIKIET, are responsible for the implementation of this PA. NIIEFA manufactures plasma-facing components (PFCs) of the EHF FW panels and performs the final assembly and testing of the panels, and NIKIET manufactures FW beam structures, load-bearing structures of PFCs, and all elements of the panel attachment system. As for the second PA, NIKIET is the sole official supplier of flexible blanket supports, electrical insulation key pads (EIKPs), and blanket module/vacuum vessel electrical connectors. Joint activities of NIKIET and NIIEFA for implementing PA 1.6.P1ARF.01 are briefly described, and information on implementation of PA 1.6.P3.RF.01 is given. Results of the engineering design and research efforts in the scope of the above PAs in 2015-2016 are reported, and results of developing the technology for manufacturing ITER blanket components are presented.

Technological integration and hyperconnectivity: Tools for promoting extreme human lifespans

NASA Astrophysics Data System (ADS)

Kyriazis, Marios

2015-07-01

Artificial, neurobiological, and social networks are three distinct complex adaptive systems (CAS), each containing discrete processing units (nodes, neurons, and humans respectively). Despite the apparent differences, these three networks are bound by common underlying principles which describe the behaviour of the system in terms of the connections of its components, and its emergent properties. The longevity (long-term retention and functionality) of the components of each of these systems is also defined by common principles. Here, I will examine some properties of the longevity and function of the components of artificial and neurobiological systems, and generalise these to the longevity and function of the components of social CAS. In other words, I will show that principles governing the long-term functionality of computer nodes and of neurons, may be extrapolated to the study of the long-term functionality of humans (or more precisely, of the noemes, an abstract combination of existence and digital fame). The study of these phenomena can provide useful insights regarding practical ways that can be used in order to maximize human longevity. The basic law governing these behaviours is the Law of Requisite Usefulness, which states that the length of retention of an agent within a CAS is proportional to the contribution of the agent to the overall adaptability of the system. Key Words: Complex Adaptive Systems, Hyper-connectivity, Human Longevity, Adaptability and Evolution, Noeme

Stretch-collapse transition of polyelectrolyte brushes in a poor solvent

NASA Astrophysics Data System (ADS)

von Goeler, F.; Muthukumar, M.

1996-12-01

This paper describes the behavior of charged, polymer brushes in electrolyte solutions of varying solvent quality. The brush height, d, dependence on the chain length, L (=Nl, where l is the Kuhn length), the grafting density σ, and solvent conditions is determined. We consider a monomer-monomer potential consisting of three components: (1) a long-ranged, screened Coulombic component of strength v¯/l (l is the Kuhn length) and range κ-1; (2) a short-ranged, two-body component of strength w¯l; and (3) a short-ranged, three-body component of strength ūl3. In particular, we examine the transition from a stretched state to a collapsed state in a poor solvent (w¯<0) as the solvent quality is decreased. Using dimensional analysis, Monte Carlo methods, and a variational technique, a first order transition is observed as predicted by the scaling arguments of Ross et al. and Borisov et al. for high charge/grafting densities. Using a variational procedure, we derive an analytical expression for the brush size and determine, quantitatively, the critical conditions for a first order transition in terms of key dimensionless variables, vN5/2, κlN1/2, wN3/2, and uN2 (where v=2πσl2v¯, w=σl2w¯, and u=σ2l4ū).

Combining biophysical methods for the analysis of protein complex stoichiometry and affinity in SEDPHAT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Huaying, E-mail: zhaoh3@mail.nih.gov; Schuck, Peter, E-mail: zhaoh3@mail.nih.gov

2015-01-01

Global multi-method analysis for protein interactions (GMMA) can increase the precision and complexity of binding studies for the determination of the stoichiometry, affinity and cooperativity of multi-site interactions. The principles and recent developments of biophysical solution methods implemented for GMMA in the software SEDPHAT are reviewed, their complementarity in GMMA is described and a new GMMA simulation tool set in SEDPHAT is presented. Reversible macromolecular interactions are ubiquitous in signal transduction pathways, often forming dynamic multi-protein complexes with three or more components. Multivalent binding and cooperativity in these complexes are often key motifs of their biological mechanisms. Traditional solution biophysicalmore » techniques for characterizing the binding and cooperativity are very limited in the number of states that can be resolved. A global multi-method analysis (GMMA) approach has recently been introduced that can leverage the strengths and the different observables of different techniques to improve the accuracy of the resulting binding parameters and to facilitate the study of multi-component systems and multi-site interactions. Here, GMMA is described in the software SEDPHAT for the analysis of data from isothermal titration calorimetry, surface plasmon resonance or other biosensing, analytical ultracentrifugation, fluorescence anisotropy and various other spectroscopic and thermodynamic techniques. The basic principles of these techniques are reviewed and recent advances in view of their particular strengths in the context of GMMA are described. Furthermore, a new feature in SEDPHAT is introduced for the simulation of multi-method data. In combination with specific statistical tools for GMMA in SEDPHAT, simulations can be a valuable step in the experimental design.« less

Discrete Event Simulation Modeling and Analysis of Key Leader Engagements

DTIC Science & Technology

2012-06-01

to offer. GreenPlayer agents require four parameters, pC, pKLK, pTK, and pRK , which give probabilities for being corrupt, having key leader...HandleMessageRequest component. The same parameter constraints apply to these four parameters. The parameter pRK is the same parameter from the CreatePlayers component...whether the local Green player has resource critical knowledge by using the parameter pRK . It schedules an EndResourceKnowledgeRequest event, passing

Measuring Local Public Health and Primary Care Collaboration: A Practice-Based Research Approach.

PubMed

Gyllstrom, Elizabeth; Gearin, Kimberly; Nease, Donald; Bekemeier, Betty; Pratt, Rebekah

2018-06-07

To describe the degree of public health and primary care collaboration at the local level and develop a model framework of collaboration, the Community Collaboration Health Model (CCHM). Mixed-methods, cross-sectional surveys, and semistructured, key informant interviews. All local health jurisdictions in Colorado, Minnesota, Washington, and Wisconsin. Leaders from each jurisdiction were identified to describe local collaboration. Eighty percent of local health directors completed our survey (n = 193), representing 80% of jurisdictions. The parallel primary care survey had a 31% response rate (n = 128), representing 50% of jurisdictions. Twenty pairs of local health directors and primary care leaders participated in key informant interviews. Thirty-seven percent of jurisdictions were classified as having strong foundational and energizing characteristics in the model. Ten percent displayed high energizing/low foundational characteristics, 11% had high foundational/low energizing characteristics, and 42% of jurisdictions were low on both. Respondents reported wide variation in relationship factors. They generally agreed that foundational characteristics were present in current working relationships but were less likely to agree that relationships had factors promoting sustainability or innovation. Both sectors valued working together in principle, yet few did. Identifying shared priorities and achieving tangible benefits may be critical to realizing sustained relationships resulting in population health improvement. Our study reveals broad variation in experiences among local jurisdictions in our sample. Tools, such as the CCHM, and technical assistance may be helpful to support advancing collaboration. Dedicated funding, reimbursement redesign, improved data systems, and data sharing capability are key components of promoting collaboration. Yet, even in the absence of new reimbursement models or funding mechanisms, there are steps leaders can take to build and sustain their relationships. The self-assessment tool and the CCHM can identify opportunities for improving collaboration and link practitioners to strategies.

Using a theory driven approach to develop and evaluate a complex mental health intervention: the friendship bench project in Zimbabwe.

PubMed

Chibanda, Dixon; Verhey, Ruth; Munetsi, Epiphany; Cowan, Frances M; Lund, Crick

2016-01-01

There is a paucity of data on how to deliver complex interventions that seek to reduce the treatment gap for mental disorders, particularly in sub-Saharan Africa. The need for well-documented protocols which clearly describe the development and the scale-up of programs and interventions is necessary if such interventions are to be replicated elsewhere. This article describes the use of a theory of change (ToC) model to develop a brief psychological intervention for common mental disorders and its' evaluation through a cluster randomized controlled trial in Zimbabwe. A total of eight ToC workshops were held with a range of stakeholders over a 6-month period with a focus on four key components of the program: formative work, piloting, evaluation and scale-up. A ToC map was developed as part of the process with defined causal pathways leading to the desired impact. Interventions, indicators, assumptions and rationale for each point along the causal pathway were considered. Political buy-in from stakeholders together with key resources, which included human, facility/infrastructure, communication and supervision were identified as critical needs using the ToC approach. Ten (10) key interventions with specific indicators, assumptions and rationale formed part of the final ToC map, which graphically illustrated the causal pathway leading to the development of a psychological intervention and the successful implementation of a cluster randomized controlled trial. ToC workshops can enhance stakeholder engagement through an iterative process leading to a shared vision that can improve outcomes of complex mental health interventions particularly where scaling up of the intervention is desired.

Propulsion system research and development for electric and hybrid vehicles

NASA Technical Reports Server (NTRS)

Schwartz, H. J.

1980-01-01

An approach to propulsion subsystem technology is presented. Various tests of component reliability are described to aid in the production of better quality vehicles. component characterization work is described to provide engineering data to manufacturers on component performance and on important component propulsion system interactions.

Circuit Design Approaches for Implementation of a Subtrellis IC for a Reed-Muller Subcode

NASA Technical Reports Server (NTRS)

Lin, Shu; Uehara, Gregory T.; Nakamura, Eric B.; Chu, Cecilia W. P.

1996-01-01

In his research, we have proposed the (64, 40, 8) subcode of the third-order Reed-Muller (RM) code to NASA for high-speed satellite communications. This RM subcode can be used either alone or as an inner code of a concatenated coding system with the NASA standard (255, 233, 33) Reed-Solomon (RS) code as the outer code to achieve high performance (or low bit-error rate) with reduced decoding complexity. It can also be used as a component code in a multilevel bandwidth efficient coded modulation system to achieve reliable bandwidth efficient data transmission. This report will summarize the key progress we have made toward achieving our eventual goal of implementing a decoder system based upon this code. In the first phase of study, we investigated the complexities of various sectionalized trellis diagrams for the proposed (64, 40, 8) RM subcode. We found a specific 8-trellis diagram for this code which requires the least decoding complexity with a high possibility of achieving a decoding speed of 600 M bits per second(Mbps). The combination of a large number of states and a high data rate will be made possible due to the utilization of a high degree of parallelism throughout the architecture. This trellis diagram will be presented and briefly described. In the second phase of study which was carried out through the past year, we investigated circuit architectures to determine the feasibility of VLSI implementation of a high- speed Viterbi decoder based on this 8-section trellis diagram. We began to examine specific design and implementation approaches to implement a fully custom integrated circuit (IC) which will be a key building block for a decoder system implementation. The key results will be presented in this report. This report will be divided into three primary sections. First, we will briefly describe the system block diagram in which the proposed decoder is assumed to be operating and present some of the key architectural approaches being used to implement the system at high speed. Second, we will describe details of the 8-trellis diagram we found to best meet the trade-offs between chip and overall system complexity. The chosen approach implements the trellis for the (64, 40, 8) RM subcode with 32 independent sub-trellises. And third, we will describe results of our feasibility study on the implementation of such an IC chip in CMOS technology to implement one of these subtrellises.

Circuit Design Approaches for Implementation of a Subtrellis IC for a Reed-Muller Subcode

NASA Technical Reports Server (NTRS)

Lin, Shu; Uehara, Gregory T.; Nakamura, Eric B.; Chu, Cecilia W. P.

1996-01-01

In this research, we have proposed the (64, 40, 8) subcode of the third-order Reed-Muller (RM) code to NASA for high-speed satellite communications. This RM subcode can be used either alone or as an inner code of a concatenated coding system with the NASA standard (255, 233, 33) Reed-Solomon (RS) code as the outer code to achieve high performance (or low bit-error rate) with reduced decoding complexity. It can also be used as a component code in a multilevel bandwidth efficient coded modulation system to achieve reliable bandwidth efficient data transmission. This report will summarize the key progress we have made toward achieving our eventual goal of implementing a decoder system based upon this code. In the first phase of study, we investigated the complexities of various sectionalized trellis diagrams for the proposed (64, 40, 8) RM subcode. We found a specific 8-trellis diagram for this code which requires the least decoding complexity with a high possibility of achieving a decoding speed of 600 M bits per second (Mbps). The combination of a large number of states and a high data rate will be made possible due to the utilization of a high degree of parallelism throughout the architecture. This trellis diagram will be presented and briefly described. In the second phase of study which was carried out through the past year, we investigated circuit architectures to determine the feasibility of VLSI implementation of a high-speed Viterbi decoder based on this 8-section trellis diagram. We began to examine specific design and implementation approaches to implement a fully custom integrated circuit (IC) which will be a key building block for a decoder system implementation. The key results will be presented in this report. This report will be divided into three primary sections. First, we will briefly describe the system block diagram in which the proposed decoder is assumed to be operating and present some of the key architectural approaches being used to implement the system at high speed. Second, we will describe details of the 8-trellis diagram we found to best meet the trade-offs between chip and overall system complexity. The chosen approach implements the trellis for the (64, 40, 8) RM subcode with 32 independent sub-trellises. And third, we will describe results of our feasibility study on the implementation of such an IC chip in CMOS technology to implement one of these subtrellises.

High-Speed Soft-Decision Decoding of Two Reed-Muller Codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Uehara, Gregory T.

1996-01-01

In his research, we have proposed the (64, 40, 8) subcode of the third-order Reed-Muller (RM) code to NASA for high-speed satellite communications. This RM subcode can be used either alone or as an inner code of a concatenated coding system with the NASA standard (255, 233, 33) Reed-Solomon (RS) code as the outer code to achieve high performance (or low bit-error rate) with reduced decoding complexity. It can also be used as a component code in a multilevel bandwidth efficient coded modulation system to achieve reliable bandwidth efficient data transmission. This report will summarize the key progress we have made toward achieving our eventual goal of implementing a decoder system based upon this code. In the first phase of study, we investigated the complexities of various sectionalized trellis diagrams for the proposed (64, 40, 8) RNI subcode. We found a specific 8-trellis diagram for this code which requires the least decoding complexity with a high possibility of achieving a decoding speed of 600 M bits per second (Mbps). The combination of a large number of states and a hi ch data rate will be made possible due to the utilization of a high degree of parallelism throughout the architecture. This trellis diagram will be presented and briefly described. In the second phase of study which was carried out through the past year, we investigated circuit architectures to determine the feasibility of VLSI implementation of a high-speed Viterbi decoder based on this 8-section trellis diagram. We began to examine specific design and implementation approaches to implement a fully custom integrated circuit (IC) which will be a key building block for a decoder system implementation. The key results will be presented in this report. This report will be divided into three primary sections. First, we will briefly describe the system block diagram in which the proposed decoder is assumed to be operating and present some of the key architectural approaches being used to implement the system at high speed. Second, we will describe details of the 8-trellis diagram we found to best meet the trade-offs between chip and overall system complexity. The chosen approach implements the trellis for the (64, 40, 8) RM subcode with 32 independent sub-trellises. And third, we will describe results of our feasibility study on the implementation of such an IC chip in CMOS technology to implement one of these sub-trellises.

High-Speed Soft-Decision Decoding of Two Reed-Muller Codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Uehara, Gregory T.

1996-01-01

In this research, we have proposed the (64, 40, 8) subcode of the third-order Reed-Muller (RM) code to NASA for high-speed satellite communications. This RM subcode can be used either alone or as an inner code of a concatenated coding system with the NASA standard (255, 233, 33) Reed-Solomon (RS) code as the outer code to achieve high performance (or low bit-error rate) with reduced decoding complexity. It can also be used as a component code in a multilevel bandwidth efficient coded modulation system to achieve reliable bandwidth efficient data transmission. This report will summarize the key progress we have made toward achieving our eventual goal of implementing, a decoder system based upon this code. In the first phase of study, we investigated the complexities of various sectionalized trellis diagrams for the proposed (64, 40, 8) RM subcode. We found a specific 8-trellis diagram for this code which requires the least decoding complexity with a high possibility of achieving a decoding speed of 600 M bits per second (Mbps). The combination of a large number of states and a high data rate will be made possible due to the utilization of a high degree of parallelism throughout the architecture. This trellis diagram will be presented and briefly described. In the second phase of study, which was carried out through the past year, we investigated circuit architectures to determine the feasibility of VLSI implementation of a high-speed Viterbi decoder based on this 8-section trellis diagram. We began to examine specific design and implementation approaches to implement a fully custom integrated circuit (IC) which will be a key building block for a decoder system implementation. The key results will be presented in this report. This report will be divided into three primary sections. First, we will briefly describe the system block diagram in which the proposed decoder is assumed to be operating, and present some of the key architectural approaches being used to implement the system at high speed. Second, we will describe details of the 8-trellis diagram we found to best meet the trade-offs between chip and overall system complexity. The chosen approach implements the trellis for the (64, 40, 8) RM subcode with 32 independent sub-trellises. And third, we will describe results of our feasibility study on the implementation of such an IC chip in CMOS technology to implement one of these sub-trellises.

Assessment of district health system within inter-sectoral context in Nepal.

PubMed

Bhusal, C L; Singh, S P; Aryal, K K; Jha, B K; Ghimire, N; Shah, N; Khatiwada, D; Magar, A

2013-05-01

Inter-sectoral coordination has been one of the different factors in the district health system that produces efficient output which has been identified by the Alma Ata declaration as an essential component to achieve notion of 'Health for All'. This study was therefore aimed to describe the major four key functions of the health systems and to find out the situation of inter-sectoral coordination in Nepal. A mixed method with Focus Group Discussion (FGD) and In-Depth Interview with relevant personnel to collect the majority of the data was carried out from June 2012 to November 2012 from six districts selected purposively based on the health performance indicators. The major findings in relation to the key functions of district health systems showed that the overall management of the district health system happens under the leadership of chief of District Health Office of Public health office with the cooperation of all the personnel in different sections in a predetermined pattern and inter-sectoral coordination and collaboration exist only to a very limited extent. The major constraints for inter-sectoral coordination to be effective is lack of its planning and enforcement where inter-sectoral coordination could be important for both preventive and promotive health care, waste management, water supply and sanitation, health service utilization, pesticides and human health, agriculture and nutrition, air pollution. The main components in the district health system needs an immediate attention and inter-sectoral effort should be initiated from the central level and implemented in all the levels.

A systematic review and qualitative analysis to inform the development of a new emergency department-based geriatric case management model.

PubMed

Sinha, Samir K; Bessman, Edward S; Flomenbaum, Neal; Leff, Bruce

2011-06-01

We inform the future development of a new geriatric emergency management practice model. We perform a systematic review of the existing evidence for emergency department (ED)-based case management models designed to improve the health, social, and health service utilization outcomes for noninstitutionalized older patients within the context of an index ED visit. This was a systematic review of English-language articles indexed in MEDLINE and CINAHL (1966 to 2010), describing ED-based case management models for older adults. Bibliographies of the retrieved articles were reviewed to identify additional references. A systematic qualitative case study analytic approach was used to identify the core operational components and outcome measures of the described clinical interventions. The authors of the included studies were also invited to verify our interpretations of their work. The determined patterns of component adherence were then used to postulate the relative importance and effect of the presence or absence of a particular component in influencing the overall effectiveness of their respective interventions. Eighteen of 352 studies (reported in 20 articles) met study criteria. Qualitative analyses identified 28 outcome measures and 8 distinct model characteristic components that included having an evidence-based practice model, nursing clinical involvement or leadership, high-risk screening processes, focused geriatric assessments, the initiation of care and disposition planning in the ED, interprofessional and capacity-building work practices, post-ED discharge follow-up with patients, and evaluation and monitoring processes. Of the 15 positive study results, 6 had all 8 characteristic components and 9 were found to be lacking at least 1 component. Two studies with positive results lacked 2 characteristic components and none lacked more than 2 components. Of the 3 studies with negative results demonstrating no positive effects based on any outcome tested, one lacked 2, one lacked 3, and one lacked 4 of the 8 model components. Successful models of ED-based case management models for older adults share certain key characteristics. This study builds on the emerging literature in this area and leverages the differences in these models and their associated outcomes to support the development of an evidence-based normative and effective geriatric emergency management practice model designed to address the special care needs and thereby improve the health and health service utilization outcomes of older patients. Copyright © 2010 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.