Monitored Geologic Repository Project Description Document
DOE Office of Scientific and Technical Information (OSTI.GOV)
P. M. Curry
2001-01-30
The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less
DESIGN ANALYSIS FOR THE NAVAL SNF WASTE PACKAGE
DOE Office of Scientific and Technical Information (OSTI.GOV)
T.L. Mitchell
2000-05-31
The purpose of this analysis is to demonstrate the design of the naval spent nuclear fuel (SNF) waste package (WP) using the Waste Package Department's (WPD) design methodologies and processes described in the ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000b). The calculations that support the design of the naval SNF WP will be discussed; however, only a sub-set of such analyses will be presented and shall be limited to those identified in the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The objective of this analysis is to describe themore » naval SNF WP design method and to show that the design of the naval SNF WP complies with the ''Naval Spent Nuclear Fuel Disposal Container System Description Document'' (CRWMS M&O 1999a) and Interface Control Document (ICD) criteria for Site Recommendation. Additional criteria for the design of the naval SNF WP have been outlined in Section 6.2 of the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The scope of this analysis is restricted to the design of the naval long WP containing one naval long SNF canister. This WP is representative of the WPs that will contain both naval short SNF and naval long SNF canisters. The following items are included in the scope of this analysis: (1) Providing a general description of the applicable design criteria; (2) Describing the design methodology to be used; (3) Presenting the design of the naval SNF waste package; and (4) Showing compliance with all applicable design criteria. The intended use of this analysis is to support Site Recommendation reports and assist in the development of WPD drawings. Activities described in this analysis were conducted in accordance with the technical product development plan (TPDP) ''Design Analysis for the Naval SNF Waste Package (CRWMS M&O 2000a).« less
In-Drift Microbial Communities
DOE Office of Scientific and Technical Information (OSTI.GOV)
D. Jolley
2000-11-09
As directed by written work direction (CRWMS M and O 1999f), Performance Assessment (PA) developed a model for microbial communities in the engineered barrier system (EBS) as documented here. The purpose of this model is to assist Performance Assessment and its Engineered Barrier Performance Section in modeling the geochemical environment within a potential repository drift for TSPA-SR/LA, thus allowing PA to provide a more detailed and complete near-field geochemical model and to answer the key technical issues (KTI) raised in the NRC Issue Resolution Status Report (IRSR) for the Evolution of the Near Field Environment (NFE) Revision 2 (NRC 1999).more » This model and its predecessor (the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document, CRWMS M and O 1998a) was developed to respond to the applicable KTIs. Additionally, because of the previous development of the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a), the M and O was effectively able to resolve a previous KTI concern regarding the effects of microbial processes on seepage and flow (NRC 1998). This document supercedes the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a). This document provides the conceptual framework of the revised in-drift microbial communities model to be used in subsequent performance assessment (PA) analyses.« less
DESIGN ANALYSIS FOR THE DEFENSE HIGH-LEVEL WASTE DISPOSAL CONTAINER
DOE Office of Scientific and Technical Information (OSTI.GOV)
G. Radulesscu; J.S. Tang
The purpose of ''Design Analysis for the Defense High-Level Waste Disposal Container'' analysis is to technically define the defense high-level waste (DHLW) disposal container/waste package using the Waste Package Department's (WPD) design methods, as documented in ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000a). The DHLW disposal container is intended for disposal of commercial high-level waste (HLW) and DHLW (including immobilized plutonium waste forms), placed within disposable canisters. The U.S. Department of Energy (DOE)-managed spent nuclear fuel (SNF) in disposable canisters may also be placed in a DHLW disposal container alongmore » with HLW forms. The objective of this analysis is to demonstrate that the DHLW disposal container/waste package satisfies the project requirements, as embodied in Defense High Level Waste Disposal Container System Description Document (SDD) (CRWMS M&O 1999a), and additional criteria, as identified in Waste Package Design Sensitivity Report (CRWMS M&Q 2000b, Table 4). The analysis briefly describes the analytical methods appropriate for the design of the DHLW disposal contained waste package, and summarizes the results of the calculations that illustrate the analytical methods. However, the analysis is limited to the calculations selected for the DHLW disposal container in support of the Site Recommendation (SR) (CRWMS M&O 2000b, Section 7). The scope of this analysis is restricted to the design of the codisposal waste package of the Savannah River Site (SRS) DHLW glass canisters and the Training, Research, Isotopes General Atomics (TRIGA) SNF loaded in a short 18-in.-outer diameter (OD) DOE standardized SNF canister. This waste package is representative of the waste packages that consist of the DHLW disposal container, the DHLW/HLW glass canisters, and the DOE-managed SNF in disposable canisters. The intended use of this analysis is to support Site Recommendation reports and to assist in the development of WPD drawings. Activities described in this analysis were conducted in accordance with the Development Plan ''Design Analysis for the Defense High-Level Waste Disposal Container'' (CRWMS M&O 2000c) with no deviations from the plan.« less
Civilian Radioactive Waste Management System Requirements Document
DOE Office of Scientific and Technical Information (OSTI.GOV)
C.A. Kouts
2006-05-10
The CRD addresses the requirements of Department of Energy (DOE) Order 413.3-Change 1, ''Program and Project Management for the Acquisition of Capital Assets'', by providing the Secretarial Acquisition Executive (Level 0) scope baseline and the Program-level (Level 1) technical baseline. The Secretarial Acquisition Executive approves the Office of Civilian Radioactive Waste Management's (OCRWM) critical decisions and changes against the Level 0 baseline; and in turn, the OCRWM Director approves all changes against the Level 1 baseline. This baseline establishes the top-level technical scope of the CRMWS and its three system elements, as described in section 1.3.2. The organizations responsible formore » design, development, and operation of system elements described in this document must therefore prepare subordinate project-level documents that are consistent with the CRD. Changes to requirements will be managed in accordance with established change and configuration control procedures. The CRD establishes requirements for the design, development, and operation of the CRWMS. It specifically addresses the top-level governing laws and regulations (e.g., ''Nuclear Waste Policy Act'' (NWPA), 10 Code of Federal Regulations (CFR) Part 63, 10 CFR Part 71, etc.) along with specific policy, performance requirements, interface requirements, and system architecture. The CRD shall be used as a vehicle to incorporate specific changes in technical scope or performance requirements that may have significant program implications. Such may include changes to the program mission, changes to operational capability, and high visibility stakeholder issues. The CRD uses a systems approach to: (1) identify key functions that the CRWMS must perform, (2) allocate top-level requirements derived from statutory, regulatory, and programmatic sources, and (3) define the basic elements of the system architecture and operational concept. Project-level documents address CRD requirements by further defining system element functions, decomposing requirements into significantly greater detail, and developing designs of system components, facilities, and equipment. The CRD addresses the identification and control of functional, physical, and operational boundaries between and within CRWMS elements. The CRD establishes requirements regarding key interfaces between the CRWMS and elements external to the CRWMS. Project elements define interfaces between CRWMS program elements. The Program has developed a change management process consistent with DOE Order 413.3-Change 1. Changes to the Secretarial Acquisition Executive and Program-level baselines must be approved by a Program Baseline Change Control Board. Specific thresholds have been established for identifying technical, cost, and schedule changes that require approval. The CRWMS continually evaluates system design and operational concepts to optimize performance and/or cost. The Program has developed systems analysis tools to assess potential enhancements to the physical system and to determine the impacts from cost saving initiatives, scientific and technological improvements, and engineering developments. The results of systems analyses, if appropriate, are factored into revisions to the CRD as revised Programmatic Requirements.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The Office of Civilian Radioactive Waste Management Systems Engineering Management Plan (OCRWM SEMP) specifies the technical management approach for the development of the waste management system, and specifies the approach for the development of each of the system elements -- the waste acceptance system, the transportation system, the Monitored Retrievable Storage (MRS) facility, and the mined geologic disposal system, which includes site characterization activity. The SEMP also delineates how systems engineering will be used by OCRWM to describe the system development process; it identifies responsibilities for its implementation, and specifies the minimum requirements for systems engineering. It also identifies themore » close interrelationship of system engineering and licensing processes. This SEMP, which is a combined OCRWM and M&O SEMP, is part of the top-level program documentation and is prepared in accordance with the direction provided in the Program Management System Manual (PMSM). The relationship of this document to other top level documents in the CRWMS document hierarchy is defined in the PMSM. A systems engineering management plan for each project, which specifies the actions to be taken in implementing systems engineering at the project level, shall be prepared by the respective project managers. [``Program`` refers to the CRWMS-wide activity and ``project`` refers to that level responsible for accomplishing the specific activities of that segment of the program.] The requirements for the project level SEMPs are addressed in Section 4.2.2.2. They represent the minimum set of requirements, and do not preclude the broadening of systems engineering activities to meet the specific needs of each project.« less
Characterize Framework for Igneous Activity at Yucca Mountain, Nevada
DOE Office of Scientific and Technical Information (OSTI.GOV)
F. Perry; B. Youngs
2000-11-06
The purpose of this Analysis/Model (AMR) report is twofold. (1) The first is to present a conceptual framework of igneous activity in the Yucca Mountain region (YMR) consistent with the volcanic and tectonic history of this region and the assessment of this history by experts who participated in the Probabilistic Volcanic Hazard Analysis (PVHA) (CRWMS M&O 1996). Conceptual models presented in the PVHA are summarized and extended in areas in which new information has been presented. Alternative conceptual models are discussed as well as their impact on probability models. The relationship between volcanic source zones defined in the PVHA andmore » structural features of the YMR are described based on discussions in the PVHA and studies presented since the PVHA. (2) The second purpose of the AMR is to present probability calculations based on PVHA outputs. Probability distributions are presented for the length and orientation of volcanic dikes within the repository footprint and for the number of eruptive centers located within the repository footprint (conditional on the dike intersecting the repository). The probability of intersection of a basaltic dike within the repository footprint was calculated in the AMR ''Characterize Framework for Igneous Activity at Yucca Mountain, Nevada'' (CRWMS M&O 2000g) based on the repository footprint known as the Enhanced Design Alternative [EDA II, Design B (CRWMS M&O 1999a; Wilkins and Heath 1999)]. Then, the ''Site Recommendation Design Baseline'' (CRWMS M&O 2000a) initiated a change in the repository design, which is described in the ''Site Recommendation Subsurface Layout'' (CRWMS M&O 2000b). Consequently, the probability of intersection of a basaltic dike within the repository footprint has also been calculated for the current repository footprint, which is called the 70,000 Metric Tons of Uranium (MTU) No-Backfill Layout (CRWMS M&O 2000b). The calculations for both footprints are presented in this AMR. In addition, the probability of an eruptive center(s) forming within the repository footprint is calculated and presented in this AMR for both repository footprint designs. This latter type of calculation was not included in the PVHA.« less
Drift-Scale Coupled Processes (DST and THC Seepage) Models
DOE Office of Scientific and Technical Information (OSTI.GOV)
E. Gonnenthal; N. Spyoher
The purpose of this Analysis/Model Report (AMR) is to document the Near-Field Environment (NFE) and Unsaturated Zone (UZ) models used to evaluate the potential effects of coupled thermal-hydrologic-chemical (THC) processes on unsaturated zone flow and transport. This is in accordance with the ''Technical Work Plan (TWP) for Unsaturated Zone Flow and Transport Process Model Report'', Addendum D, Attachment D-4 (Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) 2000 [153447]) and ''Technical Work Plan for Nearfield Environment Thermal Analyses and Testing'' (CRWMS M and O 2000 [153309]). These models include the Drift Scale Test (DST) THCmore » Model and several THC seepage models. These models provide the framework to evaluate THC coupled processes at the drift scale, predict flow and transport behavior for specified thermal loading conditions, and predict the chemistry of waters and gases entering potential waste-emplacement drifts. The intended use of this AMR is to provide input for the following: (1) Performance Assessment (PA); (2) Abstraction of Drift-Scale Coupled Processes AMR (ANL-NBS-HS-000029); (3) UZ Flow and Transport Process Model Report (PMR); and (4) Near-Field Environment (NFE) PMR. The work scope for this activity is presented in the TWPs cited above, and summarized as follows: continue development of the repository drift-scale THC seepage model used in support of the TSPA in-drift geochemical model; incorporate heterogeneous fracture property realizations; study sensitivity of results to changes in input data and mineral assemblage; validate the DST model by comparison with field data; perform simulations to predict mineral dissolution and precipitation and their effects on fracture properties and chemistry of water (but not flow rates) that may seep into drifts; submit modeling results to the TDMS and document the models. The model development, input data, sensitivity and validation studies described in this AMR are required to fully document and address the requirements of the TWPs.« less
Drift-Scale Coupled Processes (DST and THC Seepage) Models
DOE Office of Scientific and Technical Information (OSTI.GOV)
E. Sonnenthale
The purpose of this Analysis/Model Report (AMR) is to document the Near-Field Environment (NFE) and Unsaturated Zone (UZ) models used to evaluate the potential effects of coupled thermal-hydrologic-chemical (THC) processes on unsaturated zone flow and transport. This is in accordance with the ''Technical Work Plan (TWP) for Unsaturated Zone Flow and Transport Process Model Report'', Addendum D, Attachment D-4 (Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M&O) 2000 [1534471]) and ''Technical Work Plan for Nearfield Environment Thermal Analyses and Testing'' (CRWMS M&O 2000 [153309]). These models include the Drift Scale Test (DST) THC Model and several THCmore » seepage models. These models provide the framework to evaluate THC coupled processes at the drift scale, predict flow and transport behavior for specified thermal loading conditions, and predict the chemistry of waters and gases entering potential waste-emplacement drifts. The intended use of this AMR is to provide input for the following: Performance Assessment (PA); Near-Field Environment (NFE) PMR; Abstraction of Drift-Scale Coupled Processes AMR (ANL-NBS-HS-000029); and UZ Flow and Transport Process Model Report (PMR). The work scope for this activity is presented in the TWPs cited above, and summarized as follows: Continue development of the repository drift-scale THC seepage model used in support of the TSPA in-drift geochemical model; incorporate heterogeneous fracture property realizations; study sensitivity of results to changes in input data and mineral assemblage; validate the DST model by comparison with field data; perform simulations to predict mineral dissolution and precipitation and their effects on fracture properties and chemistry of water (but not flow rates) that may seep into drifts; submit modeling results to the TDMS and document the models. The model development, input data, sensitivity and validation studies described in this AMR are required to fully document and address the requirements of the TWPs.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
S. Gillespie
2000-07-27
This report describes the tests performed to validate the CRWMS ''Analysis and Logistics Visually Interactive'' Model (CALVIN) Version 3.0 (V3.0) computer code (STN: 10074-3.0-00). To validate the code, a series of test cases was developed in the CALVIN V3.0 Validation Test Plan (CRWMS M&O 1999a) that exercises the principal calculation models and options of CALVIN V3.0. Twenty-five test cases were developed: 18 logistics test cases and 7 cost test cases. These cases test the features of CALVIN in a sequential manner, so that the validation of each test case is used to demonstrate the accuracy of the input to subsequentmore » calculations. Where necessary, the test cases utilize reduced-size data tables to make the hand calculations used to verify the results more tractable, while still adequately testing the code's capabilities. Acceptance criteria, were established for the logistics and cost test cases in the Validation Test Plan (CRWMS M&O 1999a). The Logistics test cases were developed to test the following CALVIN calculation models: Spent nuclear fuel (SNF) and reactivity calculations; Options for altering reactor life; Adjustment of commercial SNF (CSNF) acceptance rates for fiscal year calculations and mid-year acceptance start; Fuel selection, transportation cask loading, and shipping to the Monitored Geologic Repository (MGR); Transportation cask shipping to and storage at an Interim Storage Facility (ISF); Reactor pool allocation options; and Disposal options at the MGR. Two types of cost test cases were developed: cases to validate the detailed transportation costs, and cases to validate the costs associated with the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M&O) and Regional Servicing Contractors (RSCs). For each test case, values calculated using Microsoft Excel 97 worksheets were compared to CALVIN V3.0 scenarios with the same input data and assumptions. All of the test case results compare with the CALVIN V3.0 results within the bounds of the acceptance criteria. Therefore, it is concluded that the CALVIN V3.0 calculation models and options tested in this report are validated.« less
Data Qualification Report: Pore Water Data for Use on the Yucca Mountain Project
DOE Office of Scientific and Technical Information (OSTI.GOV)
H. Miller; R. Monks; C. Warren
Pore water data associated with Data Tracking Number (DTN) No.LL990702804244.100 are referenced in the Analysis and Model Reports (AMRs) prepared to support the Site Recommendation in determining the suitability of the Yucca Mountain, Nevada as a repository for high-level nuclear waste. It has been determined, in accordance with procedure AP-3.15Q Rev. 1, ICN 1, ''Managing Technical Product Inputs'', Attachment 6 , that the DTN-referenced data are used in AMRs that provide a direct calculation of ''Principal Factors'' for the Post-closure Safety Case or Potentially Disruptive Processes or Events. Therefore, in accordance with the requirements of procedure AP-SIII.2Q, Rev 0, ICNmore » 2, ''Qualification of Unqualified Data and the Documentation of Rationale for Accepted Data'', Section 5.3.1 .a, a Data Qualification Report has been prepared for submittal to the Assistant Manager, Office of Project Execution for concurrence. This report summarizes the findings of the Data Qualification Team assembled to evaluate unqualified ''pore water data'' represented by DTN No. LL990702804244.100. This DTN is currently used in the following AMRs: Drift-Scale Coupled Processes (DST and THC Seepage) Models (CRWMS M&O 2000a), Environment of the Surfaces of the Drip Shield and Waste Package Outer Barrier (CRWMS M&O 2000b), and Engineered Barrier System: Physical and Chemical Environment Model (CRWMS M&O 2000c). Mineral composition of pore water submitted to the Technical Data Management System (TDMS) using the subject DTN were acquired data from the analysis pore water samples sent to Lawrence Livermore National Laboratory's (LLNL) by UFA Ventures, Inc. and analyzed by LLNL's Analytical Sciences/Analytical and Nuclear Chemistry Division (ASD). The purpose and scope of the AMRs that reference the subject DTN and the potential application of pore water data is described below. These AMRs use only that data associated with the specific samples: ESF-HD-PERM-1, ESF-HD-PERM-2, and ESF-HD-PERM-3. The data for these samples represents a subset of the data identified as DTN No. LL990702804244.100.« less
Performance Confirmation Data Aquisition System
DOE Office of Scientific and Technical Information (OSTI.GOV)
D.W. Markman
2000-10-27
The purpose of this analysis is to identify and analyze concepts for the acquisition of data in support of the Performance Confirmation (PC) program at the potential subsurface nuclear waste repository at Yucca Mountain. The scope and primary objectives of this analysis are to: (1) Review the criteria for design as presented in the Performance Confirmation Data Acquisition/Monitoring System Description Document, by way of the Input Transmittal, Performance Confirmation Input Criteria (CRWMS M&O 1999c). (2) Identify and describe existing and potential new trends in data acquisition system software and hardware that would support the PC plan. The data acquisition softwaremore » and hardware will support the field instruments and equipment that will be installed for the observation and perimeter drift borehole monitoring, and in-situ monitoring within the emplacement drifts. The exhaust air monitoring requirements will be supported by a data communication network interface with the ventilation monitoring system database. (3) Identify the concepts and features that a data acquisition system should have in order to support the PC process and its activities. (4) Based on PC monitoring needs and available technologies, further develop concepts of a potential data acquisition system network in support of the PC program and the Site Recommendation and License Application.« less
Microbial Communities Model Parameter Calculation for TSPA/SR
DOE Office of Scientific and Technical Information (OSTI.GOV)
D. Jolley
2001-07-16
This calculation has several purposes. First the calculation reduces the information contained in ''Committed Materials in Repository Drifts'' (BSC 2001a) to useable parameters required as input to MING V1.O (CRWMS M&O 1998, CSCI 30018 V1.O) for calculation of the effects of potential in-drift microbial communities as part of the microbial communities model. The calculation is intended to replace the parameters found in Attachment II of the current In-Drift Microbial Communities Model revision (CRWMS M&O 2000c) with the exception of Section 11-5.3. Second, this calculation provides the information necessary to supercede the following DTN: M09909SPAMING1.003 and replace it with a newmore » qualified dataset (see Table 6.2-1). The purpose of this calculation is to create the revised qualified parameter input for MING that will allow {Delta}G (Gibbs Free Energy) to be corrected for long-term changes to the temperature of the near-field environment. Calculated herein are the quadratic or second order regression relationships that are used in the energy limiting calculations to potential growth of microbial communities in the in-drift geochemical environment. Third, the calculation performs an impact review of a new DTN: M00012MAJIONIS.000 that is intended to replace the currently cited DTN: GS9809083 12322.008 for water chemistry data used in the current ''In-Drift Microbial Communities Model'' revision (CRWMS M&O 2000c). Finally, the calculation updates the material lifetimes reported on Table 32 in section 6.5.2.3 of the ''In-Drift Microbial Communities'' AMR (CRWMS M&O 2000c) based on the inputs reported in BSC (2001a). Changes include adding new specified materials and updating old materials information that has changed.« less
Pretest Predictions for Phase II Ventilation Tests
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yiming Sun
The objective of this calculation is to predict the temperatures of the ventilating air, waste package surface, and concrete pipe walls that will be developed during the Phase II ventilation tests involving various test conditions. The results will be used as inputs to validating numerical approach for modeling continuous ventilation, and be used to support the repository subsurface design. The scope of the calculation is to identify the physical mechanisms and parameters related to thermal response in the Phase II ventilation tests, and describe numerical methods that are used to calculate the effects of continuous ventilation. The calculation is limitedmore » to thermal effect only. This engineering work activity is conducted in accordance with the ''Technical Work Plan for: Subsurface Performance Testing for License Application (LA) for Fiscal Year 2001'' (CRWMS M&O 2000d). This technical work plan (TWP) includes an AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities'', activity evaluation (CRWMS M&O 2000d, Addendum A) that has determined this activity is subject to the YMP quality assurance (QA) program. The calculation is developed in accordance with the AP-3.12Q procedure, ''Calculations''. Additional background information regarding this activity is contained in the ''Development Plan for Ventilation Pretest Predictive Calculation'' (DP) (CRWMS M&O 2000a).« less
NaturAnalogs for the Unsaturated Zone
DOE Office of Scientific and Technical Information (OSTI.GOV)
A. Simmons; A. Unger; M. Murrell
2000-03-08
The purpose of this Analysis/Model Report (AMR) is to document natural and anthropogenic (human-induced) analog sites and processes that are applicable to flow and transport processes expected to occur at the potential Yucca Mountain repository in order to build increased confidence in modeling processes of Unsaturated Zone (UZ) flow and transport. This AMR was prepared in accordance with ''AMR Development Plan for U0135, Natural Analogs for the UZ'' (CRWMS 1999a). Knowledge from analog sites and processes is used as corroborating information to test and build confidence in flow and transport models of Yucca Mountain, Nevada. This AMR supports the Unsaturatedmore » Zone (UZ) Flow and Transport Process Model Report (PMR) and the Yucca Mountain Site Description. The objectives of this AMR are to test and build confidence in the representation of UZ processes in numerical models utilized in the UZ Flow and Transport Model. This is accomplished by: (1) applying data from Boxy Canyon, Idaho in simulations of UZ flow using the same methodologies incorporated in the Yucca Mountain UZ Flow and Transport Model to assess the fracture-matrix interaction conceptual model; (2) Providing a preliminary basis for analysis of radionuclide transport at Pena Blanca, Mexico as an analog of radionuclide transport at Yucca Mountain; and (3) Synthesizing existing information from natural analog studies to provide corroborating evidence for representation of ambient and thermally coupled UZ flow and transport processes in the UZ Model.« less
Subsurface Contamination Control
DOE Office of Scientific and Technical Information (OSTI.GOV)
Y. Yuan
There are two objectives of this report, ''Subsurface Contamination Control''. The first is to provide a technical basis for recommending limiting radioactive contamination levels (LRCL) on the external surfaces of waste packages (WP) for acceptance into the subsurface repository. The second is to provide an evaluation of the magnitude of potential releases from a defective WP and the detectability of the released contents. The technical basis for deriving LRCL has been established in ''Retrieval Equipment and Strategy for Wp on Pallet'' (CRWMS M and O 2000g, 6.3.1). This report updates the derivation by incorporating the latest design information of themore » subsurface repository for site recommendation. The derived LRCL on the external surface of WPs, therefore, supercede that described in CRWMS M and O 2000g. The derived LRCL represent the average concentrations of contamination on the external surfaces of each WP that must not be exceeded before the WP is to be transported to the subsurface facility for emplacement. The evaluation of potential releases is necessary to control the potential contamination of the subsurface repository and to detect prematurely failed WPs. The detection of failed WPs is required in order to provide reasonable assurance that the integrity of each WP is intact prior to MGR closure. An emplaced WP may become breached due to manufacturing defects or improper weld combined with failure to detect the defect, by corrosion, or by mechanical penetration due to accidents or rockfall conditions. The breached WP may release its gaseous and volatile radionuclide content to the subsurface environment and result in contaminating the subsurface facility. The scope of this analysis is limited to radioactive contaminants resulting from breached WPs during the preclosure period of the subsurface repository. This report: (1) documents a method for deriving LRCL on the external surfaces of WP for acceptance into the subsurface repository; (2) provides a table of derived LRCL for nuclides of radiological importance; (3) Provides an as low as is reasonably achievable (ALARA) evaluation of the derived LRCL by comparing potential onsite and offsite doses to documented ALARA requirements; (4) Provides a method for estimating potential releases from a defective WP; (5) Provides an evaluation of potential radioactive releases from a defective WP that may become airborne and result in contamination of the subsurface facility; and (6) Provides a preliminary analysis of the detectability of a potential WP leak to support the design of an airborne release monitoring system.« less
Mineralogic Model (MM3.0) Analysis Model Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
C. Lum
2002-02-12
The purpose of this report is to document the Mineralogic Model (MM), Version 3.0 (MM3.0) with regard to data input, modeling methods, assumptions, uncertainties, limitations and validation of the model results, qualification status of the model, and the differences between Version 3.0 and previous versions. A three-dimensional (3-D) Mineralogic Model was developed for Yucca Mountain to support the analyses of hydrologic properties, radionuclide transport, mineral health hazards, repository performance, and repository design. Version 3.0 of the MM was developed from mineralogic data obtained from borehole samples. It consists of matrix mineral abundances as a function of x (easting), y (northing),more » and z (elevation), referenced to the stratigraphic framework defined in Version 3.1 of the Geologic Framework Model (GFM). The MM was developed specifically for incorporation into the 3-D Integrated Site Model (ISM). The MM enables project personnel to obtain calculated mineral abundances at any position, within any region, or within any stratigraphic unit in the model area. The significance of the MM for key aspects of site characterization and performance assessment is explained in the following subsections. This work was conducted in accordance with the Development Plan for the MM (CRWMS M&O 2000). The planning document for this Rev. 00, ICN 02 of this AMR is Technical Work Plan, TWP-NBS-GS-000003, Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01 (CRWMS M&O 2000). The purpose of this ICN is to record changes in the classification of input status by the resolution of the use of TBV software and data in this report. Constraints and limitations of the MM are discussed in the appropriate sections that follow. The MM is one component of the ISM, which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components: (1) Geologic Framework Model (GFM); (2) Rock Properties Model (RPM); and (3) Mineralogic Model (MM). The ISM merges the detailed stratigraphy and structural features of the site into a 3-D model that will be useful in primary downstream models and repository design. These downstream models include the hydrologic flow models and the radionuclide transport models. All the models and the repository design, in turn, will be incorporated into the Total System Performance Assessment (TSPA) of the potential nuclear waste repository block and vicinity to determine the suitability of Yucca Mountain as a host for a repository. The interrelationship of the three components of the ISM and their interface with downstream uses are illustrated in Figure 1. The lateral boundaries of the ISM and its three component models are shown in Figure 2.« less
Model Validation Status Review
DOE Office of Scientific and Technical Information (OSTI.GOV)
E.L. Hardin
The primary objective for the Model Validation Status Review was to perform a one-time evaluation of model validation associated with the analysis/model reports (AMRs) containing model input to total-system performance assessment (TSPA) for the Yucca Mountain site recommendation (SR). This review was performed in response to Corrective Action Request BSC-01-C-01 (Clark 2001, Krisha 2001) pursuant to Quality Assurance review findings of an adverse trend in model validation deficiency. The review findings in this report provide the following information which defines the extent of model validation deficiency and the corrective action needed: (1) AMRs that contain or support models are identified,more » and conversely, for each model the supporting documentation is identified. (2) The use for each model is determined based on whether the output is used directly for TSPA-SR, or for screening (exclusion) of features, events, and processes (FEPs), and the nature of the model output. (3) Two approaches are used to evaluate the extent to which the validation for each model is compliant with AP-3.10Q (Analyses and Models). The approaches differ in regard to whether model validation is achieved within individual AMRs as originally intended, or whether model validation could be readily achieved by incorporating information from other sources. (4) Recommendations are presented for changes to the AMRs, and additional model development activities or data collection, that will remedy model validation review findings, in support of licensing activities. The Model Validation Status Review emphasized those AMRs that support TSPA-SR (CRWMS M&O 2000bl and 2000bm). A series of workshops and teleconferences was held to discuss and integrate the review findings. The review encompassed 125 AMRs (Table 1) plus certain other supporting documents and data needed to assess model validity. The AMRs were grouped in 21 model areas representing the modeling of processes affecting the natural and engineered barriers, plus the TSPA model itself Description of the model areas is provided in Section 3, and the documents reviewed are described in Section 4. The responsible manager for the Model Validation Status Review was the Chief Science Officer (CSO) for Bechtel-SAIC Co. (BSC). The team lead was assigned by the CSO. A total of 32 technical specialists were engaged to evaluate model validation status in the 21 model areas. The technical specialists were generally independent of the work reviewed, meeting technical qualifications as discussed in Section 5.« less
C4ISR Architecture Working Group (AWG), Architecture Framework Version 2.0.
1997-12-18
Vision Name Name/identifier of document that contains doctrine, goals, or vision Type Doctrine, goals, or vision Description Text summary description...e.g., organization, directive, order) Description Text summary of tasking •Rules, Criteria, or Conventions Name Name/identifier of document that...contains rules, criteria, or conventions Type One of: rules, criteria, or conventions Description Text summary description of contents or
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ermi, A.M.
1997-05-01
Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less
Space Station Program Description Document. Books 1-7
NASA Technical Reports Server (NTRS)
1984-01-01
The Space Station Program Description Document is summarized. The six volumes include: (1) introduction and summary; (2) mission description; (3) systems requirements and characteristics; (4) advanced development; (6) system operations; and (7) program plan. Volume 5 was deleted as a separate book.
Documents, Dialogue and the Emergence of Tertiary Orality
ERIC Educational Resources Information Center
Turner, Deborah; Allen, Warren
2013-01-01
Introduction: This investigation opens with a description of why studying non-traditional, oral documents can inform efforts to extend traditional library and information science practices, of description, storage, and retrieval, to artefacts made available through emerging media. Method: This study extends the method used to identify a document,…
The integration of system specifications and program coding
NASA Technical Reports Server (NTRS)
Luebke, W. R.
1970-01-01
Experience in maintaining up-to-date documentation for one module of the large-scale Medical Literature Analysis and Retrieval System 2 (MEDLARS 2) is described. Several innovative techniques were explored in the development of this system's data management environment, particularly those that use PL/I as an automatic documenter. The PL/I data description section can provide automatic documentation by means of a master description of data elements that has long and highly meaningful mnemonic names and a formalized technique for the production of descriptive commentary. The techniques discussed are practical methods that employ the computer during system development in a manner that assists system implementation, provides interim documentation for customer review, and satisfies some of the deliverable documentation requirements.
Generic Degraded Congiguration Probability Analysis for DOE Codisposal Waste Package
DOE Office of Scientific and Technical Information (OSTI.GOV)
S.F.A. Deng; M. Saglam; L.J. Gratton
2001-05-23
In accordance with the technical work plan, ''Technical Work Plan For: Department of Energy Spent Nuclear Fuel Work Packages'' (CRWMS M&O 2000c), this Analysis/Model Report (AMR) is developed for the purpose of screening out degraded configurations for U.S. Department of Energy (DOE) spent nuclear fuel (SNF) types. It performs the degraded configuration parameter and probability evaluations of the overall methodology specified in the ''Disposal Criticality Analysis Methodology Topical Report'' (YMP 2000, Section 3) to qualifying configurations. Degradation analyses are performed to assess realizable parameter ranges and physical regimes for configurations. Probability calculations are then performed for configurations characterized by k{submore » eff} in excess of the Critical Limit (CL). The scope of this document is to develop a generic set of screening criteria or models to screen out degraded configurations having potential for exceeding a criticality limit. The developed screening criteria include arguments based on physical/chemical processes and probability calculations and apply to DOE SNF types when codisposed with the high-level waste (HLW) glass inside a waste package. The degradation takes place inside the waste package and is long after repository licensing has expired. The emphasis of this AMR is on degraded configuration screening and the probability analysis is one of the approaches used for screening. The intended use of the model is to apply the developed screening criteria to each DOE SNF type following the completion of the degraded mode criticality analysis internal to the waste package.« less
NASA Astrophysics Data System (ADS)
Konnik, Mikhail V.; Welsh, James
2012-09-01
Numerical simulators for adaptive optics systems have become an essential tool for the research and development of the future advanced astronomical instruments. However, growing software code of the numerical simulator makes it difficult to continue to support the code itself. The problem of adequate documentation of the astronomical software for adaptive optics simulators may complicate the development since the documentation must contain up-to-date schemes and mathematical descriptions implemented in the software code. Although most modern programming environments like MATLAB or Octave have in-built documentation abilities, they are often insufficient for the description of a typical adaptive optics simulator code. This paper describes a general cross-platform framework for the documentation of scientific software using open-source tools such as LATEX, mercurial, Doxygen, and Perl. Using the Perl script that translates M-files MATLAB comments into C-like, one can use Doxygen to generate and update the documentation for the scientific source code. The documentation generated by this framework contains the current code description with mathematical formulas, images, and bibliographical references. A detailed description of the framework components is presented as well as the guidelines for the framework deployment. Examples of the code documentation for the scripts and functions of a MATLAB-based adaptive optics simulator are provided.
Waste receiving and processing plant control system; system design description
DOE Office of Scientific and Technical Information (OSTI.GOV)
LANE, M.P.
1999-02-24
The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed asmore » separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.« less
DATAS Hardware Diagnostic Tests
DOT National Transportation Integrated Search
1990-10-01
This document is reference material for personnel using the Data Link and : Analysis System (DATAS) for hardware diagnostic testing. Included in this : document is a brief overall description of the DATAS, and a thorough : description of how to opera...
Issues and solutions for storage, retrieval, and searching of MPEG-7 documents
NASA Astrophysics Data System (ADS)
Chang, Yuan-Chi; Lo, Ming-Ling; Smith, John R.
2000-10-01
The ongoing MPEG-7 standardization activity aims at creating a standard for describing multimedia content in order to facilitate the interpretation of the associated information content. Attempting to address a broad range of applications, MPEG-7 has defined a flexible framework consisting of Descriptors, Description Schemes, and Description Definition Language. Descriptors and Description Schemes describe features, structure and semantics of multimedia objects. They are written in the Description Definition Language (DDL). In the most recent revision, DDL applies XML (Extensible Markup Language) Schema with MPEG-7 extensions. DDL has constructs that support inclusion, inheritance, reference, enumeration, choice, sequence, and abstract type of Description Schemes and Descriptors. In order to enable multimedia systems to use MPEG-7, a number of important problems in storing, retrieving and searching MPEG-7 documents need to be solved. This paper reports on initial finding on issues and solutions of storing and accessing MPEG-7 documents. In particular, we discuss the benefits of using a virtual document management framework based on XML Access Server (XAS) in order to bridge the MPEG-7 multimedia applications and database systems. The need arises partly because MPEG-7 descriptions need customized storage schema, indexing and search engines. We also discuss issues arising in managing dependence and cross-description scheme search.
2015-11-01
The AAOHN Competency document is one of the core documents that define occupational health nursing practice. This article provides a description of the process used to update the competencies, as well as a description of the new competencies. © 2015 The Author(s).
NASA Technical Reports Server (NTRS)
Callender, E. David; Steinbacher, Jody
1989-01-01
This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.
HYDROLOGIC EVALUATION OF LANDFILL PERFORMANCE (HELP) MODEL - USER'S GUIDE FOR VERSION 3
This report documents the solution methods and process descriptions used in the Version 3 of the HELP model. Program documentation including program options, system and operating requirements, file structures, program structure and variable descriptions are provided in a separat...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kinsey, R.
1979-07-01
This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containingmore » partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information. (RWR)« less
Job Analysis and the Preparation of Job Descriptions. Mendip Papers MP 037.
ERIC Educational Resources Information Center
Saunders, Bob
This document provides guidelines for conducting job analyses and writing job descriptions. It covers the following topics: the rationale for job descriptions, the terminology of job descriptions, who should write job descriptions, getting the information to write job descriptions, preparing for staff interviews, conducting interviews, writing the…
Chapter 4: Variant descriptions
Duncan C. Lutes; Donald C. E. Robinson
2003-01-01
The Fire and Fuels Extension (FFE) to the Forest Vegetation Simulator (FVS) simulates fuel dynamics and potential fire behavior over time, in the context of stand development and management. This report documents differences between geographic variants of the FFE. It is a companion document to the FFE "Model Description" and "User's Guide."...
NASA Astrophysics Data System (ADS)
Foster, K.
1994-09-01
This document is a description of a computer program called Format( )MEDIC( )Input. The purpose of this program is to allow the user to quickly reformat wind velocity data in the Model Evaluation Database (MEDb) into a reasonable 'first cut' set of MEDIC input files (MEDIC.nml, StnLoc.Met, and Observ.Met). The user is cautioned that these resulting input files must be reviewed for correctness and completeness. This program will not format MEDb data into a Problem Station Library or Problem Metdata File. A description of how the program reformats the data is provided, along with a description of the required and optional user input and a description of the resulting output files. A description of the MEDb is not provided here but can be found in the RAS Division Model Evaluation Database Description document.
DOT National Transportation Integrated Search
2013-10-01
This document provides a step-by-step description of the design and execution of a strategic job analysis, using the position of Freight Conductor as an example. This document was created to be useful for many different needs, and can be used as an e...
29 CFR 2520.102-3 - Contents of summary plan description.
Code of Federal Regulations, 2010 CFR
2010-07-01
... document that accompanies the plan's SPD, provided that the document satisfies the style and format... descriptive provisions in addition to those prescribed in paragraph (t)(2) of this section. However, the style... Office of Management and Budget under control number 1210-0039) [42 FR 37180, July 19, 1977, as amended...
Gaia DR2 documentation Chapter 6: Spectroscopy
NASA Astrophysics Data System (ADS)
Sartoretti, P.; Blomme, R.; David, M.; Seabroke, G.
2018-04-01
This chapter of the Gaia DR2 documentation describes the processing and validation of the Radial Velocity Spectrometer (RVS) data. A more detailed description of the processing is provided in Sartoretti et al. (2018) and of the validation in Katz et al. (2018). A description of the RVS instrument is provided in Cropper et al. (2018).
1980-03-06
performing the present NPFC tasks. Potential automation technologies may include order processing mechanization, demand printing from micrographic or...effort and documented in this volume included the following: a. Functional description of the order processing activities as they currently operate. b...covered under each analysis area. i It is obvious from the exhibit that the functional description of order processing operations was to include COG I
System Design Description for the TMAD Code
DOE Office of Scientific and Technical Information (OSTI.GOV)
Finfrock, S.H.
This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System.
NASA Technical Reports Server (NTRS)
Buck, C. H.
1975-01-01
The program documentation for the PRF ARTWORK/AIDS conversion program, which serves as the interface between the outputs of the PRF ARTWORK and AIDS programs, was presented. The document has a two-fold purpose, the first of which is a description of the software design including flowcharts of the design at the functional level. The second purpose is to provide the user with a detailed description of the input parameters and formats necessary to execute the program and a description of the output produced when the program is executed.
Cold Vacuum Drying facility civil structural system design description (SYS 06)
DOE Office of Scientific and Technical Information (OSTI.GOV)
PITKOFF, C.C.
This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.
Putting Practice into Words: The State of Data and Methods Transparency in Grammatical Descriptions
ERIC Educational Resources Information Center
Gawne, Lauren; Kelly, Barbara F.; Berez-Kroeker, Andrea L.; Heston, Tyler
2017-01-01
Language documentation and description are closely related practices, often performed as part of the same fieldwork project on an un(der)-studied language. Research trends in recent decades have seen a great volume of publishing in regards to the methods of language documentation, however, it is not clear that linguists' awareness of the…
In-Trail Procedure (ITP) Algorithm Design
NASA Technical Reports Server (NTRS)
Munoz, Cesar A.; Siminiceanu, Radu I.
2007-01-01
The primary objective of this document is to provide a detailed description of the In-Trail Procedure (ITP) algorithm, which is part of the Airborne Traffic Situational Awareness In-Trail Procedure (ATSA-ITP) application. To this end, the document presents a high level description of the ITP Algorithm and a prototype implementation of this algorithm in the programming language C.
Functional Description of Air Traffic Control
DOT National Transportation Integrated Search
1971-04-01
The document contains a description of air traffic control in terms of generic operational functions. The functions are grouped by flight phase and by major system function (navigation, surveillance, control and communication). More detailed descript...
Flight Experiment Demonstration System (FEDS) functional description and interface document
NASA Technical Reports Server (NTRS)
Belcher, R. C.; Shank, D. E.
1984-01-01
This document presents a functional description of the Flight Experiment Demonstration System (FEDS) and of interfaces between FEDS and external hardware and software. FEDS is a modification of the Automated Orbit Determination System (AODS). FEDS has been developed to support a ground demonstration of microprocessor-based onboard orbit determination. This document provides an overview of the structure and logic of FEDS and details the various operational procedures to build and execute FEDS. It also documents a microprocessor interface between FEDS and a TDRSS user transponder and describes a software simulator of the interface used in the development and system testing of FEDS.
Medical emergencies on board commercial airlines: is documentation as expected?
2012-01-01
Introduction The purpose of this study was to perform a descriptive, content-based analysis on the different forms of documentation for in-flight medical emergencies that are currently provided in the emergency medical kits on board commercial airlines. Methods Passenger airlines in the World Airline Directory were contacted between March and May 2011. For each participating airline, sample in-flight medical emergency documentation forms were obtained. All items in the sample documentation forms were subjected to a descriptive analysis and compared to a sample "medical incident report" form published by the International Air Transport Association (IATA). Results A total of 1,318 airlines were contacted. Ten airlines agreed to participate in the study and provided a copy of their documentation forms. A descriptive analysis revealed a total of 199 different items, which were summarized into five sub-categories: non-medical data (63), signs and symptoms (68), diagnosis (26), treatment (22) and outcome (20). Conclusions The data in this study illustrate a large variation in the documentation of in-flight medical emergencies by different airlines. A higher degree of standardization is preferable to increase the data quality in epidemiologic aeromedical research in the future. PMID:22397530
A model for enhancing Internet medical document retrieval with "medical core metadata".
Malet, G; Munoz, F; Appleyard, R; Hersh, W
1999-01-01
Finding documents on the World Wide Web relevant to a specific medical information need can be difficult. The goal of this work is to define a set of document content description tags, or metadata encodings, that can be used to promote disciplined search access to Internet medical documents. The authors based their approach on a proposed metadata standard, the Dublin Core Metadata Element Set, which has recently been submitted to the Internet Engineering Task Force. Their model also incorporates the National Library of Medicine's Medical Subject Headings (MeSH) vocabulary and MEDLINE-type content descriptions. The model defines a medical core metadata set that can be used to describe the metadata for a wide variety of Internet documents. The authors propose that their medical core metadata set be used to assign metadata to medical documents to facilitate document retrieval by Internet search engines.
A Model for Enhancing Internet Medical Document Retrieval with “Medical Core Metadata”
Malet, Gary; Munoz, Felix; Appleyard, Richard; Hersh, William
1999-01-01
Objective: Finding documents on the World Wide Web relevant to a specific medical information need can be difficult. The goal of this work is to define a set of document content description tags, or metadata encodings, that can be used to promote disciplined search access to Internet medical documents. Design: The authors based their approach on a proposed metadata standard, the Dublin Core Metadata Element Set, which has recently been submitted to the Internet Engineering Task Force. Their model also incorporates the National Library of Medicine's Medical Subject Headings (MeSH) vocabulary and Medline-type content descriptions. Results: The model defines a medical core metadata set that can be used to describe the metadata for a wide variety of Internet documents. Conclusions: The authors propose that their medical core metadata set be used to assign metadata to medical documents to facilitate document retrieval by Internet search engines. PMID:10094069
7 CFR 1753.58 - Closeout documents.
Code of Federal Regulations, 2013 CFR
2013-01-01
... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...
7 CFR 1753.58 - Closeout documents.
Code of Federal Regulations, 2012 CFR
2012-01-01
... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...
7 CFR 1753.58 - Closeout documents.
Code of Federal Regulations, 2014 CFR
2014-01-01
... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...
7 CFR 1753.58 - Closeout documents.
Code of Federal Regulations, 2010 CFR
2010-01-01
... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...
7 CFR 1753.58 - Closeout documents.
Code of Federal Regulations, 2011 CFR
2011-01-01
... followed in the preparation of closeout documents for the FAP. (2) The period between the completion of... documents required to close the FAP are listed in the following table. The following is a brief description...
ERIC Educational Resources Information Center
Caballero, Gabriela
2017-01-01
Choguita Rarámuri (Tarahumara) is a Uto-Aztecan language spoken in Northern Mexico of great typological, theoretical, and historical significance. This paper presents an overview and background of the Choguita Rarámuri language description and documentation project and provides a guide to the documentary collection emerging from this project. This…
International Space Station Science Information for Public Release on the NASA Web Portal
NASA Technical Reports Server (NTRS)
Robinson, Julie A.; Tate, Judy M.
2009-01-01
This document contains some of the descriptions of payload and experiment related to life support and habitation. These describe experiments that have or are scheduled to fly on the International Space Station. There are instructions, and descriptions of the fields that make up the database. The document is arranged in alphabetical order by the Payload
ERIC Educational Resources Information Center
Federal Information Processing Standards Publication, 1976
1976-01-01
These guidelines provide a basis for determining the content and extent of documentation for computer programs and automated data systems. Content descriptions of ten document types plus examples of how management can determine when to use the various types are included. The documents described are (1) functional requirements documents, (2) data…
Vedula, S Swaroop; Li, Tianjing; Dickersin, Kay
2013-01-01
Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards for randomized controlled trials should recommend transparent descriptions and definitions of analyses performed and which study participants are excluded.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Matthews, Patrick
2014-08-01
The purpose of this CADD/CR is to provide documentation and justification that no further corrective action is needed for the closure of CAU 571 based on the implementation of corrective actions. This includes a description of investigation activities, an evaluation of the data, and a description of corrective actions that were performed. The CAIP provides information relating to the scope and planning of the investigation. Therefore, that information will not be repeated in this document.
Gomez de Segura Navarro, Carlota; Esain Larrambe, Ainhoa; Tina Majuelo, Pilar; Guembe Ibáñez, Irene; Fernández Perea, Laura; Narvaiza Solís, M Jesús
2006-01-01
(a) to determine the effectiveness of a nursing document which integrates nursing diagnoses, nursing treatments/actions (NIC), and results (NOC); (b) to verify the application of the aforementioned document in a hospitalization unit. A descriptive, transversal and observational study. Nursing documents (NANDA, NIC and NOC taxonomies). PHASES: 1st: analysis of the content in the nursing documentation for 23 pneumonic patients: Selection of nursing diagnoses and the most frequent interdependent problems. 2nd: Selection of results and nursing treatment/actions. 3rd: Elaboration of the document and a description of the Likert scales to define the state of the indicators for each result. 4th: A pilot study of the document applied to 12 patients. the application of the document permits one to identify the real status of a patient; to establish specific objectives; to improve the recording of data; to observe the effectiveness of treatment; to include educational activities; to give greater continuity and quality to a treatment plan.
ERIC Educational Resources Information Center
Girill, T. R.
1991-01-01
This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…
Traveler information services in rural tourism areas : appendix A, tourist intercept surveys
DOT National Transportation Integrated Search
2000-06-30
This document presents documentation regarding tourist intercept surveys for traveler information services in rural areas. It documents data collection functions and information dissemination functions, and provides an interpretive description of tra...
DOE Office of Scientific and Technical Information (OSTI.GOV)
F. Perry; R. Youngs
The purpose of this scientific analysis report is threefold: (1) Present a conceptual framework of igneous activity in the Yucca Mountain region (YMR) consistent with the volcanic and tectonic history of this region and the assessment of this history by experts who participated in the probabilistic volcanic hazard analysis (PVHA) (CRWMS M&O 1996 [DIRS 100116]). Conceptual models presented in the PVHA are summarized and applied in areas in which new information has been presented. Alternative conceptual models are discussed, as well as their impact on probability models. The relationship between volcanic source zones defined in the PVHA and structural featuresmore » of the YMR are described based on discussions in the PVHA and studies presented since the PVHA. (2) Present revised probability calculations based on PVHA outputs for a repository footprint proposed in 2003 (BSC 2003 [DIRS 162289]), rather than the footprint used at the time of the PVHA. This analysis report also calculates the probability of an eruptive center(s) forming within the repository footprint using information developed in the PVHA. Probability distributions are presented for the length and orientation of volcanic dikes located within the repository footprint and for the number of eruptive centers (conditional on a dike intersecting the repository) located within the repository footprint. (3) Document sensitivity studies that analyze how the presence of potentially buried basaltic volcanoes may affect the computed frequency of intersection of the repository footprint by a basaltic dike. These sensitivity studies are prompted by aeromagnetic data collected in 1999, indicating the possible presence of previously unrecognized buried volcanoes in the YMR (Blakely et al. 2000 [DIRS 151881]; O'Leary et al. 2002 [DIRS 158468]). The results of the sensitivity studies are for informational purposes only and are not to be used for purposes of assessing repository performance.« less
Tanihara, Shinichi
2015-01-01
Uncoded diagnoses in health insurance claims (HICs) may introduce bias into Japanese health statistics dependent on computerized HICs. This study's aim was to identify the causes and characteristics of uncoded diagnoses. Uncoded diagnoses from computerized HICs (outpatient, inpatient, and the diagnosis procedure-combination per-diem payment system [DPC/PDPS]) submitted to the National Health Insurance Organization of Kumamoto Prefecture in May 2010 were analyzed. The text documentation accompanying the uncoded diagnoses was used to classify diagnoses in accordance with the International Classification of Diseases-10 (ICD-10). The text documentation was also classified into four categories using the standard descriptions of diagnoses defined in the master files of the computerized HIC system: 1) standard descriptions of diagnoses, 2) standard descriptions with a modifier, 3) non-standard descriptions of diagnoses, and 4) unclassifiable text documentation. Using these classifications, the proportions of uncoded diagnoses by ICD-10 disease category were calculated. Of the uncoded diagnoses analyzed (n = 363 753), non-standard descriptions of diagnoses for outpatient, inpatient, and DPC/PDPS HICs comprised 12.1%, 14.6%, and 1.0% of uncoded diagnoses, respectively. The proportion of uncoded diagnoses with standard descriptions with a modifier for Diseases of the eye and adnexa was significantly higher than the overall proportion of uncoded diagnoses among every HIC type. The pattern of uncoded diagnoses differed by HIC type and disease category. Evaluating the proportion of uncoded diagnoses in all medical facilities and developing effective coding methods for diagnoses with modifiers, prefixes, and suffixes should reduce number of uncoded diagnoses in computerized HICs and improve the quality of HIC databases.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This large document provides a catalog of the location of large numbers of reports pertaining to the charge of the Presidential Advisory Committee on Human Radiation Research and is arranged as a series of appendices. Titles of the appendices are Appendix A- Records at the Washington National Records Center Reviewed in Whole or Part by DoD Personnel or Advisory Committee Staff; Appendix B- Brief Descriptions of Records Accessions in the Advisory Committee on Human Radiation Experiments (ACHRE) Research Document Collection; Appendix C- Bibliography of Secondary Sources Used by ACHRE; Appendix D- Brief Descriptions of Human Radiation Experiments Identified by ACHRE,more » and Indexes; Appendix E- Documents Cited in the ACHRE Final Report and other Separately Described Materials from the ACHRE Document Collection; Appendix F- Schedule of Advisory Committee Meetings and Meeting Documentation; and Appendix G- Technology Note.« less
Ontology-based reusable clinical document template production system.
Nam, Sejin; Lee, Sungin; Kim, James G Boram; Kim, Hong-Gee
2012-01-01
Clinical documents embody professional clinical knowledge. This paper shows an effective clinical document template (CDT) production system that uses a clinical description entity (CDE) model, a CDE ontology, and a knowledge management system called STEP that manages ontology-based clinical description entities. The ontology represents CDEs and their inter-relations, and the STEP system stores and manages CDE ontology-based information regarding CDTs. The system also provides Web Services interfaces for search and reasoning over clinical entities. The system was populated with entities and relations extracted from 35 CDTs that were used in admission, discharge, and progress reports, as well as those used in nursing and operation functions. A clinical document template editor is shown that uses STEP.
Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R
2016-09-01
Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.
DUB: A Format for Writing Descriptive Literature. Dissemination Document No. 9.
ERIC Educational Resources Information Center
Levine, S. Joseph; Keith, Kitty
Presented is DUB (description, use, and benefits of an idea), a format for special education teachers to use in writing descriptions of self-developed materials and methods; and included are six examples of the format. The DUB format prescribes the inclusion in brief essay form of the following information: descriptive material (structural…
Documentation of the GLAS fourth order general circulation model. Volume 1: Model documentation
NASA Technical Reports Server (NTRS)
Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, J.; Pfaendtner, J.; Takacs, L.; Takano, K.
1983-01-01
The volume 1, of a 3 volume technical memoranda which contains a documentation of the GLAS Fourth Order General Circulation Model is presented. Volume 1 contains the documentation, description of the stratospheric/tropospheric extension, user's guide, climatological boundary data, and some climate simulation studies.
ERIC Educational Resources Information Center
Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.
The three parts of this document are intended for a 3-semester course for pharmacy assistants. The course guide contains the following sections: occupational description; educational philosophy; general objectives; tasks/competencies for each unit; course organization; brief description of the topics; student standards; and evaluation methods.…
Descriptive approaches to landscape analysis
R. Burton Litton Jr.
1979-01-01
Descriptive landscape analyses include various procedures used to document visual/scenic resources. Historic and regional examples of landscape description represent desirable insight for contemporary professional inventory work. Routed and areal landscape inventories are discussed as basic tools. From them, qualitative and quantitative evaluations can be developed...
U-10Mo Baseline Fuel Fabrication Process Description
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.
This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This volume and its appendixes supplement the Advisory Committee`s final report by reporting how we went about looking for information concerning human radiation experiments and intentional releases, a description of what we found and where we found it, and a finding aid for the information that we collected. This volume begins with an overview of federal records, including general descriptions of the types of records that have been useful and how the federal government handles these records. This is followed by an agency-by-agency account of the discovery process and descriptions of the records reviewed, together with instructions on how tomore » obtain further information from those agencies. There is also a description of other sources of information that have been important, including institutional records, print resources, and nonprint media and interviews. The third part contains brief accounts of ACHRE`s two major contemporary survey projects (these are described in greater detail in the final report and another supplemental volume) and other research activities. The final section describes how the ACHRE information-nation collections were managed and the records that ACHRE created in the course of its work; this constitutes a general finding aid for the materials deposited with the National Archives. The appendices provide brief references to federal records reviewed, descriptions of the accessions that comprise the ACHRE Research Document Collection, and descriptions of the documents selected for individual treatment. Also included are an account of the documentation available for ACHRE meetings, brief abstracts of the almost 4,000 experiments individually described by ACHRE staff, a full bibliography of secondary sources used, and other information.« less
Code of Federal Regulations, 2012 CFR
2012-07-01
... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...
Code of Federal Regulations, 2013 CFR
2013-07-01
... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...
Code of Federal Regulations, 2011 CFR
2011-07-01
... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...
Code of Federal Regulations, 2010 CFR
2010-07-01
... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...
Code of Federal Regulations, 2014 CFR
2014-07-01
... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...
Vedula, S. Swaroop; Li, Tianjing; Dickersin, Kay
2013-01-01
Background Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. Methods and Findings For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Conclusions Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards for randomized controlled trials should recommend transparent descriptions and definitions of analyses performed and which study participants are excluded. Please see later in the article for the Editors' Summary PMID:23382656
Nontraditional Training and Employment Progams Serving Women Directory.
ERIC Educational Resources Information Center
Women's Bureau (DOL), Washington, DC.
This document provides short descriptions of 125 programs providing job training and preemployment skills training for women in nontraditional occupations (primarily skilled trades and crafts). Eighteen exemplary programs in all regions of the country are described. These descriptions are followed by descriptions of other training programs,…
Automated Test Methods for XML Metadata
2017-12-28
Group under RCC Task TG-147. This document (Volume VI of the RCC Document 118 series) describes procedures used for evaluating XML metadata documents...including TMATS, MDL, IHAL, and DDML documents. These documents contain specifications or descriptions of artifacts and systems of importance to...the collection and management of telemetry data. The methods defined in this report provide a means of evaluating the suitability of such a metadata
Program Helps Standardize Documentation Of Software
NASA Technical Reports Server (NTRS)
Howe, G.
1994-01-01
Intelligent Documentation Management System, IDMS, computer program developed to assist project managers in implementing information system documentation standard known as NASA-STD-2100-91, NASA STD, COS-10300, of NASA's Software Management and Assurance Program. Standard consists of data-item descriptions or templates, each of which governs particular component of software documentation. IDMS helps program manager in tailoring documentation standard to project. Written in C language.
Consolidated Development Objectives Document (CDOD) For MB-60
NASA Technical Reports Server (NTRS)
Greene, William D.
2013-01-01
This document defines the objectives related to liquid rocket engine system development to be undertaken by JAXA in support of the Space Launch System (SLS) Program managed out of the NASA Marshall Space Flight Center (MSFC). These objectives include furnishing the necessary management, labor, facilities, tools, equipment, and materials required to execute the specified activities. 1.1 Project Scope: The scope of this effort is to develop a rocket engine and associated products per the objectives and technical requirements established in this document. This engine, minus the engine controller, designated here as MB ]60, is to be developed through to a prequalification point of maturity. It is assumed that should JCNE ]1 development proceed beyond this maturity point towards actual flight qualification, the engine controller will be supplied and integrated by NASA. 1.2 Document Structure: The structure of this Consolidated Development Objectives Document (CDOD) includes a traditional description of objectives in a SOO, plus the associated Data Products Document (DPD) in an attached appendix, and then Engine Requirements Document (ERD) as another attached appendix. It is the intent that this document, in conjunction with the cited applicable documents, should constitute a complete programmatic and technical description of the development effort to be pursued.
INDUSTRIAL/MILITARY ACTIVITY-INITIATED ACCIDENT SCREENING ANALYSIS
DOE Office of Scientific and Technical Information (OSTI.GOV)
D.A. Kalinich
1999-09-27
Impacts due to nearby installations and operations were determined in the Preliminary MGDS Hazards Analysis (CRWMS M&O 1996) to be potentially applicable to the proposed repository at Yucca Mountain. This determination was conservatively based on limited knowledge of the potential activities ongoing on or off the Nevada Test Site (NTS). It is intended that the Industrial/Military Activity-Initiated Accident Screening Analysis provided herein will meet the requirements of the ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987) in establishing whether this external event can be screened from further consideration or must be includedmore » as a design basis event (DBE) in the development of accident scenarios for the Monitored Geologic Repository (MGR). This analysis only considers issues related to preclosure radiological safety. Issues important to waste isolation as related to impact from nearby installations will be covered in the MGR performance assessment.« less
DOT National Transportation Integrated Search
2015-05-01
The primary purpose of the As Built Documentation is to provide a description of any modifications made to the original architecture along with justification as to why the architecture was changed. In addition, this documentation provides the followi...
IDC System Specification Document.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Clifford, David J.
2014-12-01
This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris
28 CFR 68.18 - Discovery-general provisions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...
28 CFR 68.18 - Discovery-general provisions.
Code of Federal Regulations, 2014 CFR
2014-07-01
... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...
28 CFR 68.18 - Discovery-general provisions.
Code of Federal Regulations, 2011 CFR
2011-07-01
... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...
28 CFR 68.18 - Discovery-general provisions.
Code of Federal Regulations, 2013 CFR
2013-07-01
... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.18..., including the existence, description, nature, custody, condition, and location of any books, documents, or...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-05
... the status, benefits, and costs of video description on television and Internet- provided video... operational issues, costs, and benefits of providing video descriptions for video programming that is... document, the Federal Communications Commission (Commission) solicits public comment on issues related to...
48 CFR 811.104-70 - Brand name or equal purchase descriptions.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Brand name or equal... Requirements Documents 811.104-70 Brand name or equal purchase descriptions. (a) The specification writer may use purchase descriptions that contain references to one or more brand name products only in...
48 CFR 811.104 - Use of brand name or equal purchase descriptions.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Use of brand name or equal purchase descriptions. 811.104 Section 811.104 Federal Acquisition Regulations System DEPARTMENT OF... Requirements Documents 811.104 Use of brand name or equal purchase descriptions. ...
29 CFR 1607.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2011 CFR
2011-07-01
... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...
29 CFR 1607.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2012 CFR
2012-07-01
... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...
29 CFR 1607.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2013 CFR
2013-07-01
... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...
29 CFR 1607.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2014 CFR
2014-07-01
... (essential). (6) Sample description. A description of how the research sample was identified and selected... the size of each subgroup (essential). A description of how the research sample compares with the...). Any quantitative data which identify or define the job constructs, such as factor analyses, should be...
New Hampshire VIEW (Vital Information for Education & Work). 1976 Revised Edition.
ERIC Educational Resources Information Center
Paul, Nicholas L.; Skinner, William R.
Designed as an aid to occupational guidance, this document contains 360 alphabetically arranged job descriptions. It is an update of the three-volume "New Hampshire Jobs" series published in 1973. Each job description sheet includes job title, "Dictionary of Occupational Titles" (DOT) number, brief description, skills required, appropriate…
UTM TCL 2.0 Software Version Description (SVD) Document
NASA Technical Reports Server (NTRS)
Mcguirk, Patrick
2017-01-01
This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release
2013 RFP Ports Initiative Supporting Documents
Documents include: RFPs, Project Narrative, Application fleet description (AFD), Priority County List, Model years for eligible nonroad engines (nonroad remaining useful life), Sample Drayage, Marince Engine Eligibility, FAQs, and Webinar slides
2014 RFP Ports Initiative Supporting Documents
Documents include: RFPs, Project Narrative, Application fleet description (AFD), Priority County List, Model years for eligible nonroad engines (nonroad remaining useful life), Sample Drayage, Marince Engine Eligibility, FAQs, and Webinar slides
Gaia DR2 documentation Chapter 8: Astrophysical Parameters
NASA Astrophysics Data System (ADS)
Manteiga, M.; Andrae, R.; Fouesneau, M.; Creevey, O.; Ordenovic, C.; Mary, N.; Jean-Antoine-Piccolo, A.; Bailer-Jones, C. A. L.
2018-04-01
This chapter of the Gaia DR2 documentation describes Apsis, the Astrophysical Parameters Inference System used for processing Gaia DR2 data. Beyond this documentation, a complete description of the processing and the results, as well as additional validations, have been published in Andrae et al. (2018).
75 FR 18872 - Ginnie Mae Multiclass Securities Program Documents
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-13
... Securities Program Documents AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY... with the Multiclass Securities Program. The intent of the Multiclass Securities program is to increase... Securities Program Documents. OMB Approval Number: 2503-0030. Form Numbers: None. Description of the Need for...
Modular Integrated Stackable Layers (MISL) MI_MSP430A Board Design Document (BDD)
NASA Technical Reports Server (NTRS)
Yim, Hester
2013-01-01
This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.
The computational structural mechanics testbed data library description
NASA Technical Reports Server (NTRS)
Stewart, Caroline B. (Compiler)
1988-01-01
The datasets created and used by the Computational Structural Mechanics Testbed software system are documented by this manual. A description of each dataset including its form, contents, and organization is presented.
The computational structural mechanics testbed data library description
NASA Technical Reports Server (NTRS)
Stewart, Caroline B. (Compiler)
1988-01-01
The datasets created and used by the Computational Structural Mechanics Testbed software system is documented by this manual. A description of each dataset including its form, contents, and organization is presented.
ERIC Educational Resources Information Center
Center for Community College Student Engagement, 2013
2013-01-01
In an effort to support college conversations regarding strengthening the role of part-time faculty, this brief document presents the job description for a Valencia College part-time/adjunct professor (revised as of July 19, 2013). The description includes essential functions, qualifications, and knowledge, skills, and abilities. This is followed…
Pairwise Trajectory Management (PTM): Concept Description and Documentation
NASA Technical Reports Server (NTRS)
Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.
2018-01-01
Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training requirements focus group and human-in-the-loop testing activities, and the PTM Pilot Guide.
78 FR 40745 - Submission for OMB Review; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-08
.... Description: The Advance Planning Document (APD) process, established in the rules at 45 CFR part 95, subpart F, is the procedure by which States request and obtain approval for Federal financial participation... Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning Document 20 1 30 600 Estimated...
Documentation and Development. Experience in Algeria
ERIC Educational Resources Information Center
Tchuigoua, J. Founou
1972-01-01
A description of the activities of the Documentation, Library and Archives Department of the Algiers Chamber of Commerce and Industry, which is run by a small staff on a modest budget, provides documentation services for the staff of the Chamber of Commerce and also assists other centers in Algeria. (Author)
A guideline for heavy ion radiation testing for Single Event Upset (SEU)
NASA Technical Reports Server (NTRS)
Nichols, D. K.; Price, W. E.; Malone, C.
1984-01-01
A guideline for heavy ion radiation testing for single event upset was prepared to assist new experimenters in preparing and directing tests. How to estimate parts vulnerability and select an irradiation facility is described. A broad brush description of JPL equipment is given, certain necessary pre-test procedures are outlined and the roles and testing guidelines for on-site test personnel are indicated. Detailed descriptions of equipment needed to interface with JPL test crew and equipment are not provided, nor does it meet the more generalized and broader requirements of a MIL-STD document. A detailed equipment description is available upon request, and a MIL-STD document is in the early stages of preparation.
28 CFR 20.23 - Documentation: Approval by OJARS.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...
28 CFR 20.23 - Documentation: Approval by OJARS.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...
28 CFR 20.23 - Documentation: Approval by OJARS.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...
28 CFR 20.23 - Documentation: Approval by OJARS.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...
28 CFR 20.23 - Documentation: Approval by OJARS.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Local Criminal History Record Information Systems § 20.23 Documentation: Approval by OJARS. Within 90... description of State policy on dissemination of criminal history record information. (c) Six months after the...
IMP-J attitude control prelaunch analysis and operations plan
NASA Technical Reports Server (NTRS)
Hooper, H. L.; Mckendrew, J. B.; Repass, G. D.
1973-01-01
A description of the attitude control support being supplied for the Explorer 50 mission is given. Included in the document are descriptions of the computer programs being used to support attitude determination, prediction, and control for the mission and descriptions of the operating procedures that will be used to accomplish mission objectives.
The New Job Description Handbook for the School Business Office.
ERIC Educational Resources Information Center
Association of School Business Officials International, Reston, VA.
The ways in which individual school districts view and staff their business functions vary greatly. This document presents organizational charts and job descriptions of professional positions in the school-business office collected from school districts throughout the United States and Canada. Over 100 job descriptions from 50 school districts are…
The SIFT hardware/software systems. Volume 2: Software listings
NASA Technical Reports Server (NTRS)
Palumbo, Daniel L.
1985-01-01
This document contains software listings of the SIFT operating system and application software. The software is coded for the most part in a variant of the Pascal language, Pascal*. Pascal* is a cross-compiler running on the VAX and Eclipse computers. The output of Pascal* is BDX-390 assembler code. When necessary, modules are written directly in BDX-390 assembler code. The listings in this document supplement the description of the SIFT system found in Volume 1 of this report, A Detailed Description.
ENVIRONMENTAL INFORMATION MANAGEMENT SYSTEM (EIMS)
The Environmental Information Management System (EIMS) organizes descriptive information (metadata) for data sets, databases, documents, models, projects, and spatial data. The EIMS design provides a repository for scientific documentation that can be easily accessed with standar...
Orbital operations study. Appendix C: Data sources and vehicle descriptions
NASA Technical Reports Server (NTRS)
Steinwachs, W. L.
1972-01-01
A bibliography of published documents referred to throughout the orbital operations study is presented. A brief description of all of the space program elements included in the study vehicle inventory is developed.
Report on architecture description for the INFLO prototype.
DOT National Transportation Integrated Search
2014-01-01
This report documents the Architecture Description for the implementation of the Intelligent Network Flow Optimization (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. The intent is to ...
Rear-End Crashes: Problem Size Assessment And Statistical Description
DOT National Transportation Integrated Search
1993-05-01
KEYWORDS : RESEARCH AND DEVELOPMENT OR R&D, ADVANCED VEHICLE CONTROL & SAFETY SYSTEMS OR AVCSS, INTELLIGENT VEHICLE INITIATIVE OR IVI : THIS DOCUMENT PRESENTS PROBLEM SIZE ASSESSMENTS AND STATISTICAL CRASH DESCRIPTION FOR REAR-END CRASHES, INC...
NASA Technical Reports Server (NTRS)
Waggoner, J. T.; Phinney, D. E. (Principal Investigator)
1981-01-01
The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.
Evapotranspiration information reporting: II. Recommended documentation
USDA-ARS?s Scientific Manuscript database
Researchers and journal authors, reviewers, and readers can benefit from more complete documentation of published evapotranspiration (ET) information, including a description of field procedures, instrumentation, data filtering, model parameterization, and site review. This information is important ...
2016-12-01
C. METHODOLOGY ....................................................................................4 D. LITERATURE REVIEW... Descriptions ................................................10 Table 3. Interagency Language Roundtable Language Skill Level Table 4. Descriptions ...and cultural acquisition. METHODOLOGY D. In this project the author analyzed official documents associated with Military Information Support
Developing Your Employee Handbook: Job Descriptions.
ERIC Educational Resources Information Center
Perreault, Joe
1988-01-01
A job description is a brief document that conveys to employees the importance of their jobs to the overall success of the day-care center. If properly written, it can contribute to effective employee motivation and supervision. (RJC)
NASTRAN hydroelastic modal studies. Volume 2: Programmer documentation
NASA Technical Reports Server (NTRS)
1977-01-01
The operational steps, data descriptions, and program code for the new NASTRAN hydroelastic analysis system are described. The overall flow of the system is described, followed by the descriptions of the individual modules and their subroutines.
78 FR 37819 - Submission for OMB Review; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-24
.... Description: The Advance Planning Document (APD) process, established in the rules at 45 CFR Part 95, Subpart F, is the procedure by which States request and obtain approval for Federal financial participation... Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning Document 20 1 30 600 [[Page 37820...
CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT
DOE Office of Scientific and Technical Information (OSTI.GOV)
J.F. Beesley
The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative designmore » process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.« less
Document Set Differentiability Analyzer v. 0.1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Osborn, Thor D.
Software is a JMP Scripting Language (JSL) script designed to evaluate the differentiability of a set of documents that exhibit some conceptual commonalities but are expected to describe substantially different – thus differentiable – categories. The script imports the document set, a subset of which may be partitioned into an additions pool. The bulk of the documents form a basis pool. Text analysis is applied to the basis pool to extract a mathematical representation of its conceptual content, referred to as the document concept space. A bootstrapping approach is applied to that mathematical representation in order to generate a representationmore » of a large population of randomly designed documents that could be written within the concept space, notably without actually writing the text of those documents.The Kolmogorov-Smirnov test is applied to determine whether the basis pool document set exhibits superior differentiation relative to the randomly designed virtual documents produced by bootstrapping. If an additions pool exists, the documents are incrementally added to the basis pool, choosing the best differentiated remaining document at each step. In this manner the impact of additional categories to overall document set differentiability may be assessed.The software was developed to assess the differentiability of job description document sets. Differentiability is key to meaningful categorization. Poor job differentiation may have economic, ethical, and/or legal implications for an organization. Job categories are used in the assignment of market-based salaries; consequently, poor differentiation of job duties may set the stage for legal challenges if very similar jobs pay differently depending on title, a circumstance that also invites economic waste.The software can be applied to ensure job description set differentiability, reducing legal, economic, and ethical risks to an organization and its people. The extraction of the conceptual space to a mathematical representation enables identification of exceedingly similar documents. In the event of redundancy, two jobs may be collapsed into one. If in the judgment of the subject matter experts the jobs are truly different, the conceptual similarities are highlighted, inviting inclusion of appropriate descriptive content to explicitly characterize those differences. When additional job categories may be needed as the organization changes, the software enables evaluation of proposed additions to ensure that the resulting document set remains adequately differentiated.« less
Oak Ridge Environmental Information System (OREIS) functional system design document
DOE Office of Scientific and Technical Information (OSTI.GOV)
Birchfield, T.E.; Brown, M.O.; Coleman, P.R.
1994-03-01
The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less
NASA Technical Reports Server (NTRS)
Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.
1992-01-01
This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.
NASA Technical Reports Server (NTRS)
Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paula S.; Crump, John W.; Ackley, Keith A.
1992-01-01
In the second volume of the Demonstration Framework Document, the graphical representation of the demonstration framework is given. This second document was created to facilitate the reading and comprehension of the demonstration framework. It is designed to be viewed in parallel with Section 4.2 of the first volume to help give a picture of the relationships between the UOB's (Unit of Behavior) of the model. The model is quite large and the design team felt that this form of presentation would make it easier for the reader to get a feel for the processes described in this document. The IDEF3 (Process Description Capture Method) diagrams of the processes of an Information System Development are presented. Volume 1 describes the processes and the agents involved with each process, while this volume graphically shows the precedence relationships among the processes.
NASA Technical Reports Server (NTRS)
Middleton, W. D.; Lundry, J. L.; Coleman, R. G.
1980-01-01
The computer program documentation for the design and analysis of supersonic configurations is presented. Schematics and block diagrams of the major program structure, together with subroutine descriptions for each module are included.
NASA Astrophysics Data System (ADS)
Windell, P.
1981-08-01
This document provides basic information and technical specifications necessary for using the machine-readable magnetic tape containing data from the Household Screener Survey of the Residential Energy Consumption Survey (RECS). Included in this document are an overview of the RECS and a brief description of the Household Screener Survey. The next section contains technical specifications for reading the tape and descriptions of the contents of each of the files contained on the tape. The remaining four sections are devoted to technical topics of special interest to users of the data. Appended to this document are copies of the fieldwork instruments used in the survey and a listing of the contents of a portion of the SPSS labels information.
NASA Technical Reports Server (NTRS)
Callender, E. David; Steinbacher, Jody
1989-01-01
This is the fourth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for assurance documentation for information systems and software, hardware, and operational procedures components, and related processes. The specifications are developed in conjunction with the corresponding management plans specifying the assurance activities to be performed.
ERIC Educational Resources Information Center
Secretaria de Educacion Publica, Mexico City (Mexico). Centro de Documentacion e Informacion Educativa.
This document describes the Center for Documentation and Educational Information in Mexico City. Background information on similar services in Mexico is provided and a detailed description of the Center is presented, covering organization, objectives, administration, users, activities, services, and publications. (VM)
User Manual for the AZ-101 Data Acquisition System (AS-101 DAS)
DOE Office of Scientific and Technical Information (OSTI.GOV)
BRAYTON, D.D.
2000-02-17
User manual for the TK AZ-101 Waste Retrieval System Data Acquisition System. The purpose of this document is to describe use of the AZ-101 Data Acquisition System (AZ-101 DAS). The AZ-101 DAS is provided to fulfill the requirements for data collection and monitoring as defined in Letters of Instruction (LOI) from Numatec Hanford Corporation (NHC) to Fluor Federal Services (FFS). For a complete description of the system, including design, please refer to the AZ-101 DAS System Description document, RPP-5572.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Silviera, D.J.; Aaberg, R.L.; Cushing, C.E.
This environmental document includes a discussion of the purpose of a monitored retrievable storage facility, a description of two facility design concepts (sealed storage cask and field drywell), a description of three reference sites (arid, warm-wet, and cold-wet), and a discussion and comparison of the impacts associated with each of the six site/concept combinations. This analysis is based on a 15,000-MTU storage capacity and a throughput rate of up to 1800 MTU per year.
Information System Life-Cycle And Documentation Standards (SMAP DIDS)
NASA Technical Reports Server (NTRS)
1990-01-01
Although not computer program, SMAP DIDS written to provide systematic, NASA-wide structure for documenting information system development projects. Each DID (data item description) outlines document required for top-quality software development. When combined with management, assurance, and life cycle standards, Standards protect all parties who participate in design and operation of new information system.
Vulnerability Analyst’s Guide to Geometric Target Description
1992-09-01
not constitute indorsement of any commercial product. Form Approved REPORT DOCUMENTATION PAGE OMB No. 0704-O,8 public reporting burden for this...46 5.3 Surrogacy ..............................................46 5.4 Specialized Targets......................................46 5.5... commercially available documents for other large-scale software. The documentation is not a BRL technical report, but can be obtained by contacting
NASA Technical Reports Server (NTRS)
Callender, E. David; Steinbacher, Jody
1989-01-01
This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.
29 CFR 2700.105 - Disclosure of information by the Parties.
Code of Federal Regulations, 2012 CFR
2012-07-01
... party may use to support its claims or defenses. Any material or object that cannot be copied, or the... description of the document, including its subject matter and the purpose for which it was created; the date the document was created; the name and job title of the author of the document; and if applicable, the...
29 CFR 2700.105 - Disclosure of information by the Parties.
Code of Federal Regulations, 2013 CFR
2013-07-01
... party may use to support its claims or defenses. Any material or object that cannot be copied, or the... description of the document, including its subject matter and the purpose for which it was created; the date the document was created; the name and job title of the author of the document; and if applicable, the...
29 CFR 2700.105 - Disclosure of information by the Parties.
Code of Federal Regulations, 2014 CFR
2014-07-01
... party may use to support its claims or defenses. Any material or object that cannot be copied, or the... description of the document, including its subject matter and the purpose for which it was created; the date the document was created; the name and job title of the author of the document; and if applicable, the...
Technical Assistance and Training from the Document Design Project. Final Report.
ERIC Educational Resources Information Center
American Institutes for Research, Washington, DC.
Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…
ERIC Educational Resources Information Center
Folsom, Jessica Sidler; Osborne-Lampkin, La'Tara; Herrington, Carolyn D.
2014-01-01
This document is a companion guide to "A Descriptive Analysis of the Principal Workforce in Florida Schools" (Folsom, Osborne-Lampkin, & Herrington, in press). It describes the methods used to extract information from the Florida Department of Education database in order to conduct a descriptive analysis of the demographic…
Ballistic Missile Defense System (BMDS)
2015-12-01
Assessment and Program Evaluation CARD - Cost Analysis Requirements Description CDD - Capability Development Document CLIN - Contract Line Item Number CPD...Estimate RDT&E - Research, Development, Test, and Evaluation SAR - Selected Acquisition Report SCP - Service Cost Position TBD - To Be Determined TY - Then...BMDS December 2015 SAR March 23, 2016 16:29:09 UNCLASSIFIED 5 Mission and Description Mission and Description To develop, test, and field a layered
Event-driven management algorithm of an Engineering documents circulation system
NASA Astrophysics Data System (ADS)
Kuzenkov, V.; Zebzeev, A.; Gromakov, E.
2015-04-01
Development methodology of an engineering documents circulation system in the design company is reviewed. Discrete event-driven automatic models using description algorithms of project management is offered. Petri net use for dynamic design of projects is offered.
DOT National Transportation Integrated Search
1982-06-01
This volume provides a general description of the Airport Landside Simulation Model. A summary of simulated passenger and vehicular processing through the landside is presented. Program operating characteristics and assumptions are documented and a c...
Enhanced Traffic Management System (ETMS) : functional description, version 5.0
DOT National Transportation Integrated Search
1995-06-30
This document is a functional description of Version 5.0 of the Enhanced Traffic : Management System (ETMS). The ETMSis an automation system for supporting the : strategic management of air traffic. The ETMS is being developed and maintained in : con...
NASA Technical Reports Server (NTRS)
1989-01-01
An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.
Description and Evaluation of a Four-Channel, Coherent 100-kHz Sidescan Sonar
2004-12-01
document contains color images. 14. ABSTRACT This report documents the design and features of a new, four-channel, coherent 100-kHz sidescan sonar...Atlantic Technical Memorandum DRDC Atlantic TM 2004-204 December 2004 Abstract This report documents the design and features of a new...Results This report documents the design and features of this new high-frequency sonar system. These initial field trial results demonstrate some of
Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system
NASA Technical Reports Server (NTRS)
Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.
1992-01-01
This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.
Astronomical catalog desk reference, 1994 edition
NASA Technical Reports Server (NTRS)
1994-01-01
The Astronomical Catalog Desk Reference is designed to aid astronomers in locating machine readable catalogs in the Astronomical Data Center (ADC) archives. The key reference components of this document are as follows: A listing of shortened titles for all catalogs available from the ADC (includes the name of the lead author and year of publication), brief descriptions of over 300 astronomical catalogs, an index of ADC catalog numbers by subject keyword, and an index of ADC catalog numbers by author. The heart of this document is the set of brief descriptions generated by the ADC staff. The 1994 edition of the Astronomical Catalog Desk Reference contains descriptions for over one third of the catalogs in the ADC archives. Readers are encouraged to refer to this section for concise summaries of those catalogs and their contents.
Single-channel voice-response-system program documentation volume I : system description
DOT National Transportation Integrated Search
1977-01-01
This report documents the design and implementation of a Voice Response System (VRS) using Adaptive Differential Pulse Code Modulation (ADPCM) voice coding. Implemented on a Digital Equipment Corporation PDP-11/20,R this VRS system supports a single ...
Solid Waste Program technical baseline description
DOE Office of Scientific and Technical Information (OSTI.GOV)
Carlson, A.B.
1994-07-01
The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.
Preliminary design review report - sludge offload system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mcwethy, L.M. Westinghouse Hanford
1996-06-05
This report documents the conceptual design review of the sludge offload system for the Spent Nuclear Fuel Project. The design description, drawings, available analysis, and safety analysis were reviewed by a peer group. The design review comments and resolutions are documented.
Advanced Interval Management (IM) Concepts of Operations
NASA Technical Reports Server (NTRS)
Barmore, Bryan E.; Ahmad, Nash'at N.; Underwood, Matthew C.
2014-01-01
This document provides a high-level description of several advanced IM operations that NASA is considering for future research and development. It covers two versions of IM-CSPO and IM with Wake Mitigation. These are preliminary descriptions to support an initial benefits analysis
Sharon W. Woudenberg; Barbara L. Conkling; Barbara M. O' Connell; Elizabeth B. LaPoint; Jeffery A. Turner; Karen L. Waddell
2010-01-01
This document is based on previous documentation of the nationally standardized Forest Inventory and Analysis database (Hansen and others 1992; Woudenberg and Farrenkopf 1995; Miles and others 2001). Documentation of the structure of the Forest Inventory and Analysis database (FIADB) for Phase 2 data, as well as codes and definitions, is provided. Examples for...
IDC System Specification Document Version 1.1.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harris, James M.; Lober, Randall R.
2015-02-01
This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris
Computer Description of Black Hawk Helicopter
1979-06-01
Model Combinatorial Geometry Models Black Hawk Helicopter Helicopter GIFT Computer Code Geometric Description of Targets 20. ABSTRACT...description was made using the technique of combinatorial geometry (COM-GEOM) and will be used as input to the GIFT computer code which generates Tliic...rnHp The data used bv the COVART comtmter code was eenerated bv the Geometric Information for Targets ( GIFT )Z computer code. This report documents
Realtime Knowledge Management (RKM): From an International Space Station (ISS) Point of View
NASA Technical Reports Server (NTRS)
Robinson, Peter I.; McDermott, William; Alena, Richard L.
2004-01-01
We are developing automated methods to provide realtime access to spacecraft domain knowledge relevant a spacecraft's current operational state. The method is based upon analyzing state-transition signatures in the telemetry stream. A key insight is that documentation relevant to a specific failure mode or operational state is related to the structure and function of spacecraft systems. This means that diagnostic dependency and state models can provide a roadmap for effective documentation navigation and presentation. Diagnostic models consume the telemetry and derive a high-level state description of the spacecraft. Each potential spacecraft state description is matched against the predictions of models that were developed from information found in the pages and sections in the relevant International Space Station (ISS) documentation and reference materials. By annotating each model fragment with the domain knowledge sources from which it was derived we can develop a system that automatically selects those documents representing the domain knowledge encapsulated by the models that compute the current spacecraft state. In this manner, when the spacecraft state changes, the relevant documentation context and presentation will also change.
1 CFR 20.4 - Description of program activities.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 1 General Provisions 1 2010-01-01 2010-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS § 20.4...
76 FR 24437 - Structure and Practices of the Video Relay Service Program
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-02
... applicant, a description of the applicant's organizational structure, including the names of its executives... Internet-based relay service, including documentation on loans for equipment, inventory, property... over the applicant, a description of the applicant's organizational structure, and the names of its...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-19
... FEDERAL COMMUNICATIONS COMMISSION [DA 11-1527] Video Programming and Accessibility Advisory.... SUMMARY: This document announces the next meeting of the Video Programming Accessibility Advisory... Commission regarding video description, and the delivery of video description, access to emergency...
Kerber, Kevin A.; Morgenstern, Lewis B.; Meurer, William J.; McLaughlin, Thomas; Hall, Pamela A.; Forman, Jane; Fendrick, A. Mark; Newman-Toker, David E.
2011-01-01
Objectives Dizziness is a common presenting complaint to the emergency department (ED), and emergency physicians (EPs) consider these presentations a priority for decision support. Assessing for nystagmus and defining its features are important steps for any acute dizziness decision algorithm. The authors sought to describe nystagmus documentation in routine ED care to determine if nystagmus assessments might be an important target in decision support efforts. Methods Medical records from ED visits for dizziness were captured as part of a surveillance study embedded within an ongoing population-based cohort study. Visits with documentation of a nystagmus assessment were reviewed and coded for presence or absence of nystagmus, ability to draw a meaningful inference from the description, and coherence with the final EP diagnosis when a peripheral vestibular diagnosis was made. Results Of 1,091 visits for dizziness, 887 (81.3%) documented a nystagmus assessment. Nystagmus was present in 185 out of 887 (20.9%) visits. When nystagmus was present, no further characteristics were recorded in 48 of the 185 visits (26%). The documentation of nystagmus (including all descriptors recorded) enabled a meaningful inference about the localization or cause in only 10 of the 185 (5.4%) visits. The nystagmus description conflicted with the EP diagnosis in 113 (80.7%) of the 140 visits that received a peripheral vestibular diagnosis. Conclusions Nystagmus assessments are frequently documented in acute dizziness presentations, but details do not generally enable a meaningful inference. Recorded descriptions usually conflict with the diagnosis when a peripheral vestibular diagnosis is rendered. Nystagmus assessments might be an important target in developing decision support for dizziness presentations. PMID:21676060
NASA Technical Reports Server (NTRS)
1991-01-01
This document presents the solar electric propulsion (SEP) concept design developed as part of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the SEP concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.
Documentation and environment of the Apollo 16 samples: A preliminary report
NASA Technical Reports Server (NTRS)
1972-01-01
A catalog which is a working document that shows the locations from which samples were collected during the Apollo 16 mission, and that provides a descriptive geologic context for each sample is presented. It is a compilation of notes from work in progress, and supersedes an earlier report prepared by the Apollo Lunar Geology Investigation Team. The information was obtained from the Air-to-Ground transcript from the astronaut crew, from lunar surface television, from 60 mm Hasselblad camera photographs, and from available LRL mugshot photographs of the samples. The sample descriptions are based on these sources of data.
NASA Technical Reports Server (NTRS)
1991-01-01
This document presents the nuclear thermal rocket (NTR) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the NTR concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.
48 CFR 811.202 - Maintenance of standardization documents.
Code of Federal Regulations, 2014 CFR
2014-10-01
... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...
48 CFR 811.202 - Maintenance of standardization documents.
Code of Federal Regulations, 2010 CFR
2010-10-01
... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...
48 CFR 811.202 - Maintenance of standardization documents.
Code of Federal Regulations, 2013 CFR
2013-10-01
... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...
48 CFR 811.202 - Maintenance of standardization documents.
Code of Federal Regulations, 2012 CFR
2012-10-01
... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...
48 CFR 811.202 - Maintenance of standardization documents.
Code of Federal Regulations, 2011 CFR
2011-10-01
... standardization documents. 811.202 Section 811.202 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... been developed by the U.S. Department of Agriculture. Purchase descriptions and specifications for... 89, Subsistence, must be used by VA only when purchasing such items of subsistence from the Defense...
DRI Model of the U.S. Economy -- Model Documentation
1993-01-01
Provides documentation on Data Resources, Inc., DRI Model of the U.S. Economy and the DRI Personal Computer Input/Output Model. It also describes the theoretical basis, structure and functions of both DRI models; and contains brief descriptions of the models and their equations.
Arizona TeleMedicine Network: System Procurement Specifications.
ERIC Educational Resources Information Center
Atlantic Research Corp., Alexandria, VA.
Providing general specifications and system descriptions for segments within the Arizona TeleMedicine Project (a telecommunication system designed to deliver health services to rurally isolated American Indians in Arizona), this document, when used with the appropriate route segment document, will completely describe the project's required…
Career Education. Career Preparation and Career Development. K-12.
ERIC Educational Resources Information Center
Danbury Public Schools, CT.
The document presents information pertaining to the program in career education at the Danbury (Connecticut) public schools. The system's organizational chart and policy statement precede descriptions of the elementary, junior high, and senior high programs. Also included are descriptions of inservice teacher training activities, specialized…
Code of Federal Regulations, 2010 CFR
2010-10-01
... examination of specifications, standards, plans, drawings, data item descriptions, and other pertinent..., plans, drawings, data item descriptions, and other pertinent documents. As prescribed in 211.204(c), use the following provision: Availability for Examination of Specifications, Standards, Plans, Drawings...
A Syllabus for Biol 242--Human Anatomy.
ERIC Educational Resources Information Center
Jacob, Willis H.
This document is the fall and spring semester course syllabus of Biology 242--Human Anatomy at Southern University (Louisiana). Sections include: (1) Descriptive Information; (2) Specification of Course Goals and Objectives; (3) Readings; (4) Description of Instructional Procedures; (5) Course Requirements; (6) Course Schedule; (7) Evaluation of…
NASA Technical Reports Server (NTRS)
Jovic, Srboljub
2015-01-01
This document provides the software design description for the two core software components, the LVC Gateway, the LVC Gateway Toolbox, and two participants, the LVC Gateway Data Logger and the SAA Processor (SaaProc).
Minnesota Department of Education Agricultural Education Program Descriptions 01.0000-01.9095
ERIC Educational Resources Information Center
Minnesota Department of Education, 2004
2004-01-01
This document provides a brief compilation of descriptions of agricultural education programs linked to Career and Technical Education (CTE) initiative in Minnesota. Agriculture Exploration courses focus on the animal sciences, plant sciences, natural resource sciences, agricultural business and marketing, and leadership development. Agribusiness…
Annual Review of Information Science and Technology. Volume Eight.
ERIC Educational Resources Information Center
Cuadra, Carlos A., Ed.; Luke, Ann W., Ed.
Descriptions and appraisals of significant recent trends and developments in the field of information science are presented. The eleven individual chapters deal, respectively, with the following topics: 1) the economics of information, 2) document description and representation, 3) automated language processing, 4) microform technology, 5) library…
SMART (Shop floor Modeling, Analysis and Reporting Tool Project
NASA Technical Reports Server (NTRS)
Centeno, Martha A.; Garcia, Maretys L.; Mendoza, Alicia C.; Molina, Louis A.; Correa, Daisy; Wint, Steve; Doice, Gregorie; Reyes, M. Florencia
1999-01-01
This document presents summarizes the design and prototype of the Shop floor Modeling, Analysis, and Reporting Tool (S.M.A.R.T.) A detailed description of it is found on the full documentation given to the NASA liaison. This documentation is also found on the A.R.I.S.E. Center web site, under a projected directory. Only authorized users can gain access to this site.
Langley Atmospheric Information Retrieval System (LAIRS): System description and user's guide
NASA Technical Reports Server (NTRS)
Boland, D. E., Jr.; Lee, T.
1982-01-01
This document presents the user's guide, system description, and mathematical specifications for the Langley Atmospheric Information Retrieval System (LAIRS). It also includes a description of an optimal procedure for operational use of LAIRS. The primary objective of the LAIRS Program is to make it possible to obtain accurate estimates of atmospheric pressure, density, temperature, and winds along Shuttle reentry trajectories for use in postflight data reduction.
Specifying Skill-Based Training Strategies and Devices: A Model Description
1990-06-01
Technical Report 897 Specifying Skill-Based Training N Strategies and Devices: A Model Description I Paui J. Sticha and Mark Schlager Human Resources...unlimied 90 ’ Technical Report 897 Specifying Skill-Based Training Strategies and Devices: A Model Description Paul J. Sticha and Mark Schlager Human...SECURITY CLASSIFICATION OF THIS PAGE Form Approved REPORT DOCUMENTATION PAGE FMNo o7 ote la. REPORT SECURITY CLASSIFICATION lb. RESTRICTWE MARKINGS
Coal conversion: description of technologies and necessary biomedical and environmental research
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1976-08-01
This document contains a description of the biomedical and environmental research necessary to ensure the timely attainment of coal conversion technologies amenable to man and his environment. The document is divided into three sections. The first deals with the types of processes currently being considered for development; the data currently available on composition of product, process and product streams, and their potential effects; and problems that might arise from transportation and use of products. Section II is concerned with a description of the necessary research in each of the King-Muir categories, while the third section presents the research strategies necessarymore » to assess the potential problems at the conversion plant (site specific) and those problems that might effect the general public and environment as a result of the operation of large-scale coal conversion plants.« less
KAPPA -- Kernel Application Package
NASA Astrophysics Data System (ADS)
Currie, Malcolm J.; Berry, David. S.
KAPPA is an applications package comprising about 180 general-purpose commands for image processing, data visualisation, and manipulation of the standard Starlink data format---the NDF. It is intended to work in conjunction with Starlink's various specialised packages. In addition to the NDF, KAPPA can also process data in other formats by using the `on-the-fly' conversion scheme. Many commands can process data arrays of arbitrary dimension, and others work on both spectra and images. KAPPA operates from both the UNIX C-shell and the ICL command language. This document describes how to use KAPPA and its features. There is some description of techniques too, including a section on writing scripts. This document includes several tutorials and is illustrated with numerous examples. The bulk of this document comprises detailed descriptions of each command as well as classified and alphabetical summaries.
Curriculum Development System for Navy Technical Training.
ERIC Educational Resources Information Center
Butler, Lucius
Documentation for the U.S. Navy's curriculum development system is brought together in this paper, beginning with a description of the Naval Technical Training System. This description includes the Navy Training Plan (NTP) process, which is the current mechanism for introducing new courses; the organization and administration of the system; the…
Specialty and Systems Engineering Supplement to IEEE 15288.1
2017-08-28
requirements with a space-specific recommended practice. (8) Added Section 3.2.21, Systems Engineering Data Item Descriptions (DIDs...Systems Engineering Data Item Descriptions ........................................................ 17 4. Applicable Documents...and life cycle cost analyses. d. Alternative designs and capabilities of manufacturing are evaluated . e. Long-lead-time items, material source
48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.
Code of Federal Regulations, 2013 CFR
2013-10-01
... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...
48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.
Code of Federal Regulations, 2012 CFR
2012-10-01
... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...
48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.
Code of Federal Regulations, 2011 CFR
2011-10-01
... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...
48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.
Code of Federal Regulations, 2010 CFR
2010-10-01
... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...
48 CFR 1352.271-85 - Documentation of requests for equitable adjustment.
Code of Federal Regulations, 2014 CFR
2014-10-01
... installation of such property shall be indicated. A separate description shall be furnished for design and... design work and production work; (4) A description of any interference or inefficiency encountered in...-referenced to the detailed information required above; and (9) A statement setting forth a comparative...
State Competencies for Writing: Grades K-6. Technical Note.
ERIC Educational Resources Information Center
Lawlor, Joseph
This paper contains descriptions of mandated minimum competency documents from seven states: Florida, Georgia, Louisiana, Michigan, Oklahoma, Tennessee, and Texas. Each description provides a picture of the general nature of the state requirements and a discussion of the specific writing skills requirements. The procedures used to compile a…
Effective Middle Level Teaching: Perceptions on the Preparedness of Newly Hired Teachers
ERIC Educational Resources Information Center
Howell, Penny B.; Cook, Chris; Faulkner, Shawn A.
2013-01-01
This interpretive, exploratory study utilized survey methodology to document middle level principals' perceptions of effective teaching practices and the preparedness of newly hired middle level teachers. The findings suggest that principals' descriptions of effective teaching differ from their descriptions of effective teachers. Additionally,…
46 CFR 550.403 - Contents of petitions.
Code of Federal Regulations, 2011 CFR
2011-10-01
... description and citation of the foreign law, rule, regulation, practice or competitive method complained of; (b) A certified copy of any law, rule, regulation or other document involved and, if not in English... competitive method; (d) A clear description, in detail, of the harm already caused or which may reasonably be...
106-17 Telemetry Standards Metadata Configuration Chapter 23
2017-07-01
23-1 23.2 Metadata Description Language ...Chapter 23, July 2017 iii Acronyms HTML Hypertext Markup Language MDL Metadata Description Language PCM pulse code modulation TMATS Telemetry...Attributes Transfer Standard W3C World Wide Web Consortium XML eXtensible Markup Language XSD XML schema document Telemetry Network Standard
The Tehran Book Processing Centre.
ERIC Educational Resources Information Center
Harvey, John F.
Establishment of the Tehran Book Processing Centre (Tebroc) was proposed in the Spring of 1968. This document is a descriptive and historical account of the center, and a description of its contributions to Iranian processing development. The center was modeled, to a certain extent, after Bro-Dart's Alanar in Williamsport, Pennsylvania. Tebroc was…
Computer hardware description languages - A tutorial
NASA Technical Reports Server (NTRS)
Shiva, S. G.
1979-01-01
The paper introduces hardware description languages (HDL) as useful tools for hardware design and documentation. The capabilities and limitations of HDLs are discussed along with the guidelines needed in selecting an appropriate HDL. The directions for future work are provided and attention is given to the implementation of HDLs in microcomputers.
Descriptive Study of Noncommercial FM Radio Stations Affiliated with Colleges and Universities.
ERIC Educational Resources Information Center
Leidman, Mary Beth; Lamberski, Richard J.
Designed to establish a framework for current and future documentation of FM radio in institutions of higher education, this study examined the state of noncommercial FM radio stations affiliated with colleges and universities. Topics investigated included: (1) basic descriptions of institutions housing noncommercial radio stations; (2) operating…
The Assessment of Hands-On Elementary Science Programs.
ERIC Educational Resources Information Center
Hein, George, Ed.
This document contains 15 chapters on various topics related to elementary science assessment. A comprehensive description of efforts to introduce alternatives to multiple-choice, paper and pencil tests to assess science learning is provided. The monograph includes an analysis of assessment issues, descriptions of current practice, and suggestions…
ERIC Educational Resources Information Center
Bernard Van Leer Foundation, The Hague (Netherlands).
This document provides brief descriptions of the major projects supported in 1989 by the Bernard van Leer Foundation. A total of 94 projects are covered. Each is described in terms of: (1) the sponsoring institution; (2) the title of the project; (3) the duration of project activities supported by the foundation; and (4) a description of the…
41 CFR 60-3.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2011 CFR
2011-07-01
... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...
41 CFR 60-3.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2013 CFR
2013-07-01
... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...
41 CFR 60-3.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2010 CFR
2010-07-01
... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...
41 CFR 60-3.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2014 CFR
2014-07-01
... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...
41 CFR 60-3.15 - Documentation of impact and validity evidence.
Code of Federal Regulations, 2012 CFR
2012-07-01
... group should be described (essential). (6) Sample description. A description of how the research sample... research sample compares with the relevant labor market or work force, the method by which the relevant... quantitative data which identify or define the job constructs, such as factor analyses, should be provided...
DOT National Transportation Integrated Search
2015-06-01
This document serves as an Operational Concept for the Transit Traveler Information Infrastructure Mobility Application. The purpose of this document is to provide an operational description of how the Transit Traveler Information Infrastructur...
Financing the School Plant. Draft.
ERIC Educational Resources Information Center
King, Dave; Kimbrough, Ted
Thirteen methods of financing school buildings in California are described in this document. A brief introduction reviews recent changes in California school financing, following passage of Proposition 13, and explains the need for new financing methods. For each method, the document provides a description (which also points out limitations),…
Code of Federal Regulations, 2010 CFR
2010-10-01
... Standardization Information System (ASSIST), and Plans, Drawings, and Other Pertinent Documents. Availability of... Information System (ASSIST), and Plans, Drawings, and Other Pertinent Documents. Availability of... Streamlining and Standardization Information System (ASSIST), and Plans, Drawings, and Other Pertinent...
40 CFR 62.14424 - What documentation must I maintain onsite?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 8 2010-07-01 2010-07-01 false What documentation must I maintain onsite? 62.14424 Section 62.14424 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... under this subpart; (2) Description of basic combustion theory applicable to an HMIWI; (3) Procedures...
NASA Technical Reports Server (NTRS)
Callender, E. David; Steinbacher, Jody
1989-01-01
This is the fifth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for management control and status reports used in monitoring and controlling the management, development, and assurance of informations systems and software, hardware, and operational procedures components, and related processes.
NASA Technical Reports Server (NTRS)
Adams, A.
1973-01-01
The Interface Control Document contains engine information necessary for installation of the baseline RL10 Derivative engines in the Space Tug vehicle. The ICD presents a description of the baseline engines and their operating characteristics, mass and load characteristics, and environmental criteria. The document defines the engine/vehicle mechanical, electrical, fluid and pneumatic interface requirements.
Oak Ridge TNS Program: system description manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Reid, R.L.; Becraft, W.R.; Brown, T.G.
1979-05-01
This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.
Description and Evaluation of GDEM-V 3.0
2009-02-06
Description and Evaluation of GDEM -V 3.0 Michael R. caRnes Ocean Sciences Branch Oceanography Division February 6, 2009 i REPORT DOCUMENTATION PAGE Form...include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Description and Evaluation of GDEM -V 3.0 Michael R. Carnes...unlimited. Unclassified Unclassified Unclassified UL 24 Michael R. Carnes (228) 688-5648 The GDEM (Generalized Digital Environment Model) has served as
Acquisition Documentation Streamlining, the SEP, and the PESHE
2012-05-21
identifying any other ESOH requirements (e.g., ban on use of Ozone Depleting Substances or hexavalent chrome ) "Description/Comments:" Use 2-3...limitations on use of hexavalent chrome ) "Description/Comments:" Use 2-3 paragraphs to describe the strategy for integrating ESOH into SE processes...optional tasks) and identifying any other ESOH requirements (e.g., ban on use of Ozone Depleting Substances or hexavalent chrome ) "Description
Using CASE tools to write engineering specifications
NASA Astrophysics Data System (ADS)
Henry, James E.; Howard, Robert W.; Iveland, Scott T.
1993-08-01
There are always a wide variety of obstacles to writing and maintaining engineering documentation. To combat these problems, documentation generation can be linked to the process of engineering development. The same graphics and communication tools used for structured system analysis and design (SSA/SSD) also form the basis for the documentation. The goal is to build a living document, such that as an engineering design changes, the documentation will `automatically' revise. `Automatic' is qualified by the need to maintain textual descriptions associated with the SSA/SSD graphics, and the need to generate new documents. This paper describes a methodology and a computer aided system engineering toolset that enables a relatively seamless transition into document generation for the development engineering team.
Channeling Your Donna Reed Syndrome.
ERIC Educational Resources Information Center
Mercer County Community Coll., Trenton, NJ.
This document offers materials on stress management used in a workplace literacy project developed by Mercer County Community College (New Jersey) and its partners. The document contains handouts on the following topics: (1) description of learners' typical days and identification of their stress points; (2) what stress is and is not; (3) a…
ERIC Educational Resources Information Center
California State Dept. of Education, Sacramento.
This document offers additional guidelines for school facilities in California in the areas of safety and security, lighting, and cleanliness. It also offers a description of technology resources available on the World Wide Web. On the topic of safety and security, the document offers guidelines in the areas of entrances, doors, and controlled…
78 FR 14556 - Proposed Information Collection Activity; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-06
... for ACF. OMB No.: 0992-0005. Description: The Advance Planning Document (APD) process, established in... Biennial Reports 54 1 1.50 81 Advance Planning Document 34 1.2 120 4,896 Operational Advance Planning... for the proper performance of the functions of the agency, including whether the information shall...
DOT National Transportation Integrated Search
2015-03-01
This document serves as an Operational Concept for the Transit Vehicle and Center Data Exchange application. The purpose of this document is to provide an operational description of how the Transit Vehicle and Center Data Exchange application m...
Student Flow Model SFM-IA: System Documentation. Technical Report 41B. Preliminary Edition.
ERIC Educational Resources Information Center
Busby, John C.; Johnson, Richard S.
Technical specifications, operating procedures, and reference information for the National Center for Higher Education Management Systems' (NCHEMS) Student Flow Model (SFM) computer programs are presented. Included are narrative descriptions of the system and its modules, specific program documentation for each of the modules, system flowcharts,…
DEVELOPMENT AND EVALUATION OF NOVEL DOSE-RESPONSE MODELS FOR USE IN MICROBIAL RISK ASSESSMENT
This document contains a description of dose-response modeling methods designed to provide a robust approach under uncertainty for predicting human population risk from exposure to pathogens in drinking water.
The purpose of this document is to describe a body of literatu...
IPPF Co-operative Information Service (ICIS). February 1978.
ERIC Educational Resources Information Center
International Planned Parenthood Federation, London (England).
This publication is a catalogue of document descriptions that may be of use to national family planning/population organizations. The International Planned Parenthood Federation (IPPF) Cooperative Information Service (ICIS) has developed this quarterly series as a service to population documentation centers so that these centers can acquire the…
DOT National Transportation Integrated Search
2013-11-01
This document serves as an Operational Concept for the Transit Bus-Pedestrian/Cyclist Crossing Safety application. The purpose of this document is to provide an operational description of how the Transit Bus-Pedestrian/Cyclist Crossing Safety W...
Cassini/Huygens Program Archive Plan for Science Data
NASA Technical Reports Server (NTRS)
Conners, D.
2000-01-01
The purpose of this document is to describe the Cassini/Huygens science data archive system which includes policy, roles and responsibilities, description of science and supplementary data products or data sets, metadata, documentation, software, and archive schedule and methods for archive transfer to the NASA Planetary Data System (PDS).
Information system life-cycle and documentation standards, volume 1
NASA Technical Reports Server (NTRS)
Callender, E. David; Steinbacher, Jody
1989-01-01
The Software Management and Assurance Program (SMAP) Information System Life-Cycle and Documentation Standards Document describes the Version 4 standard information system life-cycle in terms of processes, products, and reviews. The description of the products includes detailed documentation standards. The standards in this document set can be applied to the life-cycle, i.e., to each phase in the system's development, and to the documentation of all NASA information systems. This provides consistency across the agency as well as visibility into the completeness of the information recorded. An information system is software-intensive, but consists of any combination of software, hardware, and operational procedures required to process, store, or transmit data. This document defines a standard life-cycle model and content for associated documentation.
NASA Technical Reports Server (NTRS)
Warren, W. H., Jr.
1984-01-01
A detailed description of the machine-readable revised catalog as it is currently being distributed from the Astronomical Data Center is given. This catalog of star images was compiled from imagery obtained by the Naval Research Laboratory (NRL) Far-Ultraviolet Camera/Spectrograph (Experiments S201) operated from 21 to 23 April 1972 on the lunar surface during the Apollo 16 mission. The documentation includes a detailed data format description, a table of indigenous characteristics of the magnetic tape file, and a sample listing of data records exactly as they are presented in the machine-readable version.
Biodiversity and parasites of wildlife: helminths of Australasian marsupials.
Beveridge, Ian; Spratt, David M
2015-04-01
Despite current attempts to document the extent of biodiversity on Earth, significant problems exist in fully documenting the helminth parasites of wildlife. Using the Australasian marsupials as an example, we examine some of these difficulties, including challenges in collecting uncommon host species, the ongoing description of new species of marsupials, the presence of cryptic species, and the decline in taxonomic expertise in Australia. Although optimistic global predictions have been made concerning the rate of discovery and description of new species of animals, these predictions may not apply in the case of specific groups of animals such as the Australasian marsupials. Copyright © 2014 Elsevier Ltd. All rights reserved.
Hanford Site National Environmental Policy Act (NEPA) Characterization
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rohay, A.C.; Fosmire, C.J.; Neitzel, D.A.
1999-09-28
This document describes the US Department of Energy's (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many NEPA documents being prepared by DOE contractors. No conclusions or recommendations are provided. This year's report is the eleventh revision of the original document published in 1988 and is (until replaced by the 12th revision) the only version that is relevant for use in the preparation of Hanford NEPA; SEPA and CERCLA documents. The two chapters included in this document (Chapters 4 and 6) are numbered tomore » correspond to the chapters where such information is presented in environmental impact statements (EISs) and other Site-related NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology, geology, hydrology, ecology, cultural, archaeological and historical resources, socioeconomic; occupational safety, and noise. Sources for extensive tabular data related to these topics are provided in the chapter. Most subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, of the 100,200,300, and other Areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) is essentially a definitive NEPA Chapter 6.0, which describes applicable federal and state laws and regulations, DOE directives and permits, and environmental standards directly applicable to the NEPA documents on the Hanford Site. People preparing environmental assessments and EISs should also be cognizant of the document entitled ''Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements'' published by the DOE Office of NEPA Oversight. Pacific Northwest National Laboratory (PNNL) staff prepared individual sections of this document, with input from other Site contractors. More detailed data are available from reference sources cited or from the authors. The following sections of the document were reviewed by the authors and updated with the best available information through June 1999: Climate and Meteorology; Ecology; Cultural, Archaeological, and Historical Resources; Socioeconomics; and All of Chapter 6.« less
Cline, Robert; Sexton, Natalie; Stewart, Susan C.
2007-01-01
The following report was prepared for the U.S. Fish and Wildlife Service National Refuge System in support of their Comprehensive Conservation Planning (CCP) efforts by the Policy Analysis and Science Assistance Branch (PASA), Fort Collins Science Center, U.S. Geological Survey. While this document provides a summary of contemporary recreation management literature and methodologies, relevant to the subject of managing wildlife disturbances on national wildlife refuges, this document should be viewed as a starting point for management administrators. This document identifies general issues relating to wildlife disturbance and visitor impacts including a description of disturbance, recreational impacts, related human dimensions applications, management frameworks, and a general summary of management solutions. The section on descriptions of wildlife disturbance and impacts draws heavily from the report entitled 'Managing the Impacts of Visitor Use on Waterbirds -- A Literature Review of Impacts and Mitigation' (DeLong, 2002; Delong and Adamcik, in press) and is referenced in the text. This document is more comprehensive in its review of wildlife response to disturbance. This document is intended to discuss the human-dimensions aspect of wildlife disturbance, summarizing human dimensions and recreation management literature as it applies to this topic.
Studying the Accuracy of Software Process Elicitation: The User Articulated Model
ERIC Educational Resources Information Center
Crabtree, Carlton A.
2010-01-01
Process models are often the basis for demonstrating improvement and compliance in software engineering organizations. A descriptive model is a type of process model describing the human activities in software development that actually occur. The purpose of a descriptive model is to provide a documented baseline for further process improvement…
48 CFR 752.7005 - Submission requirements for development experience documents.
Code of Federal Regulations, 2011 CFR
2011-10-01
..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...
48 CFR 752.7005 - Submission requirements for development experience documents.
Code of Federal Regulations, 2012 CFR
2012-10-01
..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...
48 CFR 752.7005 - Submission requirements for development experience documents.
Code of Federal Regulations, 2013 CFR
2013-10-01
..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...
48 CFR 752.7005 - Submission requirements for development experience documents.
Code of Federal Regulations, 2014 CFR
2014-10-01
..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...
48 CFR 752.7005 - Submission requirements for development experience documents.
Code of Federal Regulations, 2010 CFR
2010-10-01
..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...
ERIC Educational Resources Information Center
Bureau of Labor Statistics, Washington, DC.
This document provides a description of engineering, scientific, and related occupations. Descriptions may include: (1) information on the nature of the work; (2) training required; (3) earnings; (4) job prospects, and (5) sources of additional information. Among the occupations described, the following job titles are included: Engineering,…
ERIC Educational Resources Information Center
Florida State Dept. of Education, Tallahassee. Bureau of Instructional Support and Community Services.
This document presents the full revised course descriptions for Florida exceptional student education in grades 9-12. Courses incorporate the Florida standards for a special diploma. Requirements include a list of related benchmarks from the state standards for each level of functioning: independent, supported, and participatory. Introductory…
Truth, Love and Campus Expansion. The University of Pittsburgh Experience.
ERIC Educational Resources Information Center
Shaw, Paul C.
This document provides a descriptive analysis of the University of Pittsburgh's experience with campus expansion during a 2 1/2 year period from fall 1970 to spring 1973. Part one describes a background and overview of campus expansion, a description of selective Oakland demographic characteristics, a discussion of the first major conflict with…
World Perspective Case Descriptions on Educational Programs for Adults: Portugal.
ERIC Educational Resources Information Center
Soares de Melo, Alvaro; Cristovao, Artur F. A. C.
The case descriptions of two adult education programs in Portual contained in this document are part of a set that reflects a cooperative effort by adult educators to increase international understanding of various educational programs for adults in their societal context. A face sheet for each program provides this information: name,…
NASA Technical Reports Server (NTRS)
Wilber, George F.
2017-01-01
This Software Description Document (SDD) captures the design for developing the Flight Interval Management (FIM) system Configurable Graphics Display (CGD) software. Specifically this SDD describes aspects of the Boeing CGD software and the surrounding context and interfaces. It does not describe the Honeywell components of the CGD system. The SDD provides the system overview, architectural design, and detailed design with all the necessary information to implement the Boeing components of the CGD software and integrate them into the CGD subsystem within the larger FIM system. Overall system and CGD system-level requirements are derived from the CGD SRS (in turn derived from the Boeing System Requirements Design Document (SRDD)). Display and look-and-feel requirements are derived from Human Machine Interface (HMI) design documents and working group recommendations. This Boeing CGD SDD is required to support the upcoming Critical Design Review (CDR).
EMSE at TREC 2015 Clinical Decision Support Track
2015-11-20
pseudo relevant documents, semantic ressources of UMLS , and a hybrid approach called SMERA that combines LSI and UMLS based approaches. Only three of...approach to query expansion uses ontologies ( UMLS ) and a lo- cal approach based on pseudo relevant feedback documents using LSI. A brief description of...pseudo relevance feedback documents, and a semantic method based on UMLS concepts. The LSI-based method was used only to expand summary terms that can’t
A Combinatorial Geometry Computer Description of the XR311 Vehicle
1978-04-01
cards or magnetic tape. The shot line output of the GRID subroutine of the GIFT code is also stored on magnetic tape for future vulnera- bility...descriptions as processed by the Geometric Information For Targets ( GIFT )2 computer code. This report documents the COM-GEOM target description for all...72, March 1974. ’L.W. Bains and M.J. Reisinger, "The GIFT Code User Manual, VOL 1, Introduction and Input Requirements, " Ballistic Research
Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides
2009-01-01
STOCHASTIC LANCHESTER AIR-TO-AIR CAMPAIGN MODEL MODEL DESCRIPTION AND USERS GUIDES—2009 REPORT PA702T1 Rober t V. Hemm Jr. Dav id A . Lee...LMI © 2009. ALL RIGHTS RESERVED. Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides—2009 PA702T1/JANUARY...2009 Executive Summary This report documents the latest version of the Stochastic Lanchester Air-to-Air Campaign Model (SLAACM), developed by LMI for
DOE Office of Scientific and Technical Information (OSTI.GOV)
None,
1979-01-01
This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less
An Analysis of the Horticulture Equipment and Services Occupation.
ERIC Educational Resources Information Center
Harbage, Monroe; Lechner, Donald L.
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the horticulture equipment and services occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Fourteen duties are…
Space Documentation Services: Operations Handbook.
ERIC Educational Resources Information Center
Raitt, D. I.
A description of the system used by Space Documentation Service (SDS) to disseminate combined and accumulated knowledge, as widely as possible, throughout Europe is given. The RECON network, with the full support of NASA, has gradually been extended so that centers in Member States, may, by installing their own terminals, have direct access to the…
Advanced Marketing/Coop Course Outline.
ERIC Educational Resources Information Center
Dixon, Bobby
This document contains the information required to present a 1-year school course that is the capstone class of a 2-year marketing major and is designed for high school students wishing to develop the skills required for entry into the marketing industry. The document begins with a rationale, brief course description, list of course objectives,…
Consulting for Black Enterprise...A Challenge to the Business Establishment.
ERIC Educational Resources Information Center
Strang, William A.; And Others
This document presents a description of the Minority Business Consulting Program, a graduate course at the University of Wisconsin Graduate School of Business. The report is presented for various audiences. It is presented as a working document for college instructors and administrators as a possible vehicle for a program in enterprise formation…
An Analysis of the Commercial Art Occupation.
ERIC Educational Resources Information Center
Mowen, Kenneth A.; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the commercial artist occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Seventeen duties are broken down into a…
State Requirements for High School Graduation: Communication Skills. Technical Note.
ERIC Educational Resources Information Center
Lawlor, Joseph
This paper contains descriptions of documents setting forth the minimum communications skills competencies required for high school graduation in seven states: Florida, Louisiana, Maryland, Massachusetts, New Mexico, and Utah. It then describes the procedures used to compile a synthesized list from those documents for use in a project to assess…
Legal Typewriting, Business Education: 7705.35.
ERIC Educational Resources Information Center
Missirlian, Melanie
The course is designed to help the student qualify for employment as a typist in a legal office. Instruction is given to enable the student to prepare all types of legal documents, spell and use legal terminology correctly, and transfer legal information from one document to another. The course description includes: (1) equipment and supplies, (2)…
An Analysis of the Machine Trades Occupation.
ERIC Educational Resources Information Center
Hall, Charles W.; Emory, Harold L.
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the machine trades occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Fifteen duties are broken down into a number…
Project: Ways to Improve Education in Desegregated Schools (WIEDS). [Appendices for Final Report.
ERIC Educational Resources Information Center
Roberson, Don R.; And Others
This document consists of a literature review and the description of a field study undertaken as part of a pilot research project focusing on improving education in desegregated public schools. The review documents the organization and successful programmatic strategies of school integration. Findings are presented in terms of administrative and…
A Survey of Selected Document Processing Systems.
ERIC Educational Resources Information Center
Fong, Elizabeth
In addition to reviewing the characteristics of document processing systems, this paper pays considerable attention to the description of a system via a feature list approach. The purpose of this report is to present features of the systems in parallel fashion to facilitate comparison so that a potential user may have a basis for evaluation in…
Project IMPACT Software Documentation: Overview of the Computer-Administered Instruction Subsystem.
ERIC Educational Resources Information Center
Stelzer, John; Garneau, Jean
Research in Project IMPACT, prototypes of computerized training for Army personnel, is documented in an overview of the IMPACT computer software system for computer-administered instruction, exclusive of instructional software. The overview description provides a basis for an understanding of the rationale and motivation for the development of the…
An Analysis of the Laboratory Assisting Occupation.
ERIC Educational Resources Information Center
McGee, Patricia; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the laboratory assistant occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down into a…
Implementing Curriculum-Based Learning Portfolio: A Case Study in Taiwan
ERIC Educational Resources Information Center
Chen, Shu-Chin Susan; Cheng, Yu-Pay
2011-01-01
The main purpose of this descriptive research is to examine and document the development of a curriculum-based learning portfolio model for children in a preschool for three-six-year-olds in Taiwan. Data collection methods adopted include classroom observation, in-depth interviews, questionnaires and documentation. Participants include a preschool…
A Plan for: A Consumer Conference for Older Adults.
ERIC Educational Resources Information Center
Zarakov, Selma
This document provides a step-by-step description of the planning and implementation of a two day consumer concerns conference for older adults held at Palomar Community College (California). The bulk of the document is made up of practical discussions of such planning phases as facility selection and decoration, conference publicity, snack and…
An Analysis of the Insurance Sales Occupation.
ERIC Educational Resources Information Center
Moore, Gordon; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the insurance sales occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down into a number…
Global Document Delivery, User Studies, and Service Evaluation: The Gateway Experience
ERIC Educational Resources Information Center
Miller, Rush; Xu, Hong; Zou, Xiuying
2008-01-01
This study examines user and service data from 2002-2006 at the East Asian Gateway Service for Chinese and Korean Academic Journal Publications (Gateway Service), the University of Pittsburgh. Descriptive statistical analysis reveals that the Gateway Service has been consistently playing the leading role in global document delivery service as well…
An Analysis of the Purchasing Occupation.
ERIC Educational Resources Information Center
Lustic, Gary; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the purchasing occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Fourteen duties are broken down into a number of…
An Analysis of the Lithographic Printing Occupation.
ERIC Educational Resources Information Center
Innis, Gene A.; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the lithographic printing occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Nine duties are broken down into a…
An Analysis of the Information Receptionist Occupation.
ERIC Educational Resources Information Center
Sams, Helen C.; Snyder, Lois M.
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the information receptionist occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Ten duties are broken down into a…
An Analysis of the Industrial Sales Occupation.
ERIC Educational Resources Information Center
Kitzmiller, Charles C.; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the industrial sales occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eight duties are broken down into a number…
Collection Development Organization and Committees. SPEC Kit 11.
ERIC Educational Resources Information Center
Association of Research Libraries, Washington, DC. Office of Management Studies.
This kit focuses on information that is useful for starting a collection development program. It contains 7 position descriptions, 10 documents on the role of committees, 4 organization charts, 5 documents on the organization of functions, and an analysis of a Systems and Procedures Exchange Center (SPEC) collection development survey. The survey,…
Impact of Environmental Pollution on the Preservation of Archives and Records: A RAMP Study.
ERIC Educational Resources Information Center
Pascoe, M. W.
Following a description of the essential chemical and physical structures of most archive documents, this paper examines the various pollutants that can damage these documents and gives their characteristics. The pollutants are categorized as environmental (e.g., smokes, mineral dusts); exterior gas and vapor (e.g., oxygen, water, sulphur…
Predicate Argument Structure Analysis for Use Case Description Modeling
NASA Astrophysics Data System (ADS)
Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira
In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.
Furlan, Giovanni
2012-08-01
Current regulations require a description of the overall safety profile or the specific risks of a drug in multiple documents such as the Periodic and Development Safety Update Reports, Risk Management Plans (RMPs) and Signal Detection Reports. In a resource-constrained world, the need for preparing multiple documents reporting the same information results in shifting the focus from a thorough scientific and medical evaluation of the available data to maintaining compliance with regulatory timelines. Since the aim of drug safety is to understand and characterize product issues to take adequate risk minimization measures rather than to comply with bureaucratic requirements, there is the need to avoid redundancy. In order to identify core drug safety activities that need to be undertaken to protect patient safety and reduce the number of documents reporting the results of these activities, the author has reviewed the main topics included in the drug safety guidelines and templates. The topics and sources that need to be taken into account in the main regulatory documents have been found to greatly overlap and, in the future, as a result of the new Periodic Safety Update Report structure and requirements, in the author's opinion this overlap is likely to further increase. Many of the identified inter-document differences seemed to be substantially formal. The Development Safety Update Report, for example, requires separate presentation of the safety issues emerging from different sources followed by an overall evaluation of each safety issue. The RMP, instead, requires a detailed description of the safety issues without separate presentation of the evidence derived from each source. To some extent, however, the individual documents require an in-depth analysis of different aspects; the RMP, for example, requires an epidemiological description of the indication for which the drug is used and its risks. At the time of writing this article, this is not specifically required by other documents. The author has identified signal detection (intended not only as adverse event disproportionate reporting, but including non-clinical, laboratory, clinical analysis data and literature screening) and characterization as the basis for the preparation of all drug safety documents, which can be viewed as different ways of presenting the results of this activity. Therefore, the author proposes to merge all the aggregate reports required by current regulations into a single document - the Drug Safety Master File. This report should contain all the available information, from any source, regarding the potential and identified risks of a drug. It should be a living document updated and submitted to regulatory authorities on an ongoing basis.
Kuikka, E; Eerola, A; Porrasmaa, J; Miettinen, A; Komulainen, J
1999-01-01
Since a patient record is typically a document updated by many users, required to be represented in many different layouts, and transferred from place to place, it is a good candidate to be represented structured and coded using the SGML document standard. The use of the SGML requires that the structure of the document is defined in advance by a Document Type Definition (DTD) and the document follows it. This paper represents a method which derives an SGML DTD by starting from the description of the usage of the patient record in medical care and nursing.
The TMIS life-cycle process document, revision A
NASA Technical Reports Server (NTRS)
1991-01-01
The Technical and Management Information System (TMIS) Life-Cycle Process Document describes the processes that shall be followed in the definition, design, development, test, deployment, and operation of all TMIS products and data base applications. This document is a roll out of TMIS Standards Document (SSP 30546). The purpose of this document is to define the life cycle methodology that the developers of all products and data base applications and any subsequent modifications shall follow. Included in this methodology are descriptions of the tasks, deliverables, reviews, and approvals that are required before a product or data base application is accepted in the TMIS environment.
Automatic document classification of biological literature
Chen, David; Müller, Hans-Michael; Sternberg, Paul W
2006-01-01
Background Document classification is a wide-spread problem with many applications, from organizing search engine snippets to spam filtering. We previously described Textpresso, a text-mining system for biological literature, which marks up full text according to a shallow ontology that includes terms of biological interest. This project investigates document classification in the context of biological literature, making use of the Textpresso markup of a corpus of Caenorhabditis elegans literature. Results We present a two-step text categorization algorithm to classify a corpus of C. elegans papers. Our classification method first uses a support vector machine-trained classifier, followed by a novel, phrase-based clustering algorithm. This clustering step autonomously creates cluster labels that are descriptive and understandable by humans. This clustering engine performed better on a standard test-set (Reuters 21578) compared to previously published results (F-value of 0.55 vs. 0.49), while producing cluster descriptions that appear more useful. A web interface allows researchers to quickly navigate through the hierarchy and look for documents that belong to a specific concept. Conclusion We have demonstrated a simple method to classify biological documents that embodies an improvement over current methods. While the classification results are currently optimized for Caenorhabditis elegans papers by human-created rules, the classification engine can be adapted to different types of documents. We have demonstrated this by presenting a web interface that allows researchers to quickly navigate through the hierarchy and look for documents that belong to a specific concept. PMID:16893465
Supportive Training for Inexperienced and New Teachers (STINT). Part I.
ERIC Educational Resources Information Center
Fox, David J.; And Others
This document is an evaluative description of the program conducted by the New York City Board of Education during the 1968-69 school year. Opening chapters describe the two-phase evaluation design (descriptive and qualitative) and outline the program in which an initial group of 152 master teachers plus 100 more added in Febraury were assigned as…
ERIC Educational Resources Information Center
Hood, Paul D.; Blackwell, Laird
This manual provides a description of the development and a guide to the use of the assessment resources developed in connection with the Far West Development, Dissemination, and Evaluation (DD&E) Functional Competence Training Program. The document concentrates on a user-oriented description of the content, validation, and use of the final…
NASA Technical Reports Server (NTRS)
Lennington, R. K.; Rassbach, M. E.
1979-01-01
Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.
Machine-Aided Indexing in Practice: An Encounter with Automatic Indexing of the Third Kind.
ERIC Educational Resources Information Center
Klingbiel, Paul H.
This three-part report includes a brief history of the Defense Documentation Center (DDC) with a description of the collections and their accessibility; categorization of automatic indexing into three kinds with a brief description of the DDC system of machine-aided indexing; and an indication of some operational experiences with the system.…
ERIC Educational Resources Information Center
Godby, Carol Jean
2013-01-01
This document describes a proposed alignment between BIBFRAME (Bibliographic Framework) and a model being explored by the Online Computer Library Center (OCLC) with extensions proposed by the Schema Bib Extend project, a Worldwide Web Consortium sponsored (W3C-sponsored) community group tasked with enhancing Schema.org to the description of…
World Perspective Case Descriptions on Educational Programs for Adults: Chile.
ERIC Educational Resources Information Center
Donoso, Patricio; Gajardo, Marcela
This document contains two case studies of adult education programs in Chile. Both case studies begin with a "face sheet" on which is recorded basic information about the program and the description. The first case study, prepared by Patricio Donoso, reports on Centro El Canelo de Nos, an inservice center for educators who work with…
Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0
NASA Technical Reports Server (NTRS)
Etheridge, Melvin; Plugge, Joana; Retina, Nusrat
1998-01-01
The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.
2011-06-01
d’envol d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces...d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces canadiennes...afin d’entraîner les pilotes d’hélicoptère à l’atterrissage sur le pont d’envol d’une frégate canadienne de patrouille dans un environnement virtuel
Launch Deployment Assembly Extravehicular Activity Neutral Buoyancy Development Test Report
NASA Technical Reports Server (NTRS)
Loughead, T.
1996-01-01
This test evaluated the Launch Deployment Assembly (LDA) design for Extravehicular Activity (EVA) work sites (setup, igress, egress), reach and visual access, and translation required for cargo item removal. As part of the LDA design, this document describes the method and results of the LDA EVA Neutral Buoyancy Development Test to ensure that the LDA hardware support the deployment of the cargo items from the pallet. This document includes the test objectives, flight and mockup hardware description, descriptions of procedures and data collection used in the testing, and the results of the development test at the National Aeronautics and Space Administrations (NASA) Marshall Space Flight Center (MSFC) Neutral Buoyancy Simulator (NBS).
Title list of documents made publicly available. Volume 17, No. 10
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.
Title list of documents made publicly available, September 1--30, 1994. Volume 16, No. 9
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1994-11-01
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.
Main image file tape description
Warriner, Howard W.
1980-01-01
This Main Image File Tape document defines the data content and file structure of the Main Image File Tape (MIFT) produced by the EROS Data Center (EDC). This document also defines an INQUIRY tape, which is just a subset of the MIFT. The format of the INQUIRY tape is identical to the MIFT except for two records; therefore, with the exception of these two records (described elsewhere in this document), every remark made about the MIFT is true for the INQUIRY tape.
Title list of documents made publicly available, November 1--30, 1994. Volume 16, No. 11
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1995-01-01
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.
DTD Creation for the Software Technology for Adaptable, Reliable Systems (STARS) Program
1990-06-23
developed to store documents in a format peculiar to the program’s design . Editing the document became easy since word processors adjust all spacing and...descriptive markup may be output to a 3 CDRL 1810 January 26, 1990 variety of devices ranging from high quality typography printers through laser printers...provision for non-SGML material, such as graphics , to be inserted in a document. For these reasons the Computer-Aided Acquisition and Logistics Support
Concept document of the repository-based software engineering program: A constructive appraisal
NASA Technical Reports Server (NTRS)
1992-01-01
A constructive appraisal of the Concept Document of the Repository-Based Software Engineering Program is provided. The Concept Document is designed to provide an overview of the Repository-Based Software Engineering (RBSE) Program. The Document should be brief and provide the context for reading subsequent requirements and product specifications. That is, all requirements to be developed should be traceable to the Concept Document. Applied Expertise's analysis of the Document was directed toward assuring that: (1) the Executive Summary provides a clear, concise, and comprehensive overview of the Concept (rewrite as necessary); (2) the sections of the Document make best use of the NASA 'Data Item Description' for concept documents; (3) the information contained in the Document provides a foundation for subsequent requirements; and (4) the document adequately: identifies the problem being addressed; articulates RBSE's specific role; specifies the unique aspects of the program; and identifies the nature and extent of the program's users.
An Analysis of the Real Estate Property Managing Occupation.
ERIC Educational Resources Information Center
Bryan, James E.
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the real estate property manager occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down…
An Analysis of the Payroll Clerking Occupation.
ERIC Educational Resources Information Center
Peal, Sharyn; Rose, Virginia
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the payroll clerk occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Ten duties are broken down into a number of…
ENHANCED STREAM WATER QUALITY MODELS QUAL2E AND QUAL2E-UNCAS: DOCUMENTATION AND USER MANUAL
The manual is a major revision of the original QUAL2E program documentation released in 1985. It includes a description of the recent modifications and improvements to the widely used water quality models QUAL-II and QUAL2E. The enhancements include an extensive capability for un...
ERIC Educational Resources Information Center
Louisiana State Dept. of Education, Baton Rouge. Div. of Special Education.
The document specifies Louisiana's plan for special education in fiscal years 1984-86 as required by P.L. 94-142, The Education for All Handicapped Children Act. The document lists policies, procedures, and descriptions of the state's special education efforts, including the full educational opportunities goal, child identification, individualized…
Description and Documentation of the Dental School Dental Delivery System.
ERIC Educational Resources Information Center
Chase, Rosen and Wallace, Inc., Alexandria, VA.
A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…
ERIC Educational Resources Information Center
Chacon, Thiago Costa
2012-01-01
This dissertation offers a detailed account of the phonology, morphophonology and elements of the morphosyntax of Kubeo, a language from the Eastern Tukanoan family, spoken in the Northwest Amazon. The dissertation is itself an experiment of how language documentation and empowering of the native speaker community can be combined with academic…
An Analysis of the Auto Body Repair Occupation.
ERIC Educational Resources Information Center
Stranke, Edward J.; Speck, Samuel R.
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the auto body mechanic occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down into a…
First Steps to Endangered Language Documentation: The Kalasha Language, a Case Study
ERIC Educational Resources Information Center
Mela-Athanasopoulou, Elizabeth
2011-01-01
The present paper based on extensive fieldwork D conducted on Kalasha, an endangered language spoken in the three small valleys in Chitral District of Northwestern Pakistan, exposes a spontaneous dialogue-based elicitation of linguistic material used for the description and documentation of the language. After a brief display of the basic typology…
An Analysis of the Waste Water Treatment Maintenance Mechanic Occupation.
ERIC Educational Resources Information Center
Clark, Anthony B.; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the waste water treatment mechanics occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Twelve duties are broken…
12 CFR 1101.5 - Testimony and production of documents in response to subpoena, order, etc.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Testimony and production of documents in response to subpoena, order, etc. 1101.5 Section 1101.5 Banks and Banking FEDERAL FINANCIAL INSTITUTIONS EXAMINATION COUNCIL DESCRIPTION OF OFFICE, PROCEDURES, PUBLIC INFORMATION § 1101.5 Testimony and production of...
An Analysis of the Television and Radio Service Occupation.
ERIC Educational Resources Information Center
Pomeroy, James W.; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the television and radio service occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eight duties are broken down…
ERIC Educational Resources Information Center
Hulse, Ira; And Others
One of six documents describing the Management Information System for Vocational Education (MISVE), this document is intended for MISVE managers and electronic data processing (EDP) operations staff who would be responsible for the implementation and maintenance of the MISVE on the computer. (MISVE was designed to provide users with an advanced…
An Analysis of the Air Conditioning, Refrigerating and Heating Occupation.
ERIC Educational Resources Information Center
Frass, Melvin R.; Krause, Marvin
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the air conditioning, refrigerating, and heating occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Six duties are…
An Analysis of the Diesel Truck Mechanic Occupation.
ERIC Educational Resources Information Center
Kilo, Joseph L.
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the diesel truck mechanic occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Thirteen duties are broken down into a…
R-189 (C-620) air compressor control logic software documentation. Revision 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Walter, K.E.
1995-06-08
This relates to FFTF plant air compressors. Purpose of this document is to provide an updated Computer Software Description for the software to be used on R-189 (C-620-C) air compressor programmable controllers. Logic software design changes were required to allow automatic starting of a compressor that had not been previously started.
Teacher Evaluation Instruments: The Processes and Protocols in Washington State
ERIC Educational Resources Information Center
Webb, Andie Shane
2012-01-01
This study provides a descriptive analysis of teacher evaluation documents used in the state of Washington in 2010-2011. The purpose of the research was to understand what documents were used, differences and similarities from district to district, and the extent to which they conformed to state administrative rules and what the literature argues…
Studying the Strawberry Farm: Investigation and Representation in a Standards-Based Kindergarten
ERIC Educational Resources Information Center
Wheeler, Charlene; Blank, Jolyn
2011-01-01
This article documents a first project undertaken by kindergarten children and their teacher in a public school in the southeastern United States. Images, work samples, records of children's comments, and the teacher's description tell the story of the project as it unfolds. The authors provide interpretation of the project events documented in…
An Analysis of the Dental Assisting Occupation.
ERIC Educational Resources Information Center
Hough, Sharon L.; And Others
The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the dental assistant occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Six duties are broken down into a number of…
A Matter of Facts: The North Carolina Community College System Fact Book, 1999.
ERIC Educational Resources Information Center
North Carolina Community Coll. System, Raleigh.
This document is a yearly publication that provides authoritative data on the status of the North Carolina Community College System. The introduction begins with the history and description of the programs of the System. Its governance and funding procedures are then described, as is a statewide plan. The second section of the document discusses…
TRACER - TRACING AND CONTROL OF ENGINEERING REQUIREMENTS
NASA Technical Reports Server (NTRS)
Turner, P. R.
1994-01-01
TRACER (Tracing and Control of Engineering Requirements) is a database/word processing system created to document and maintain the order of both requirements and descriptive material associated with an engineering project. A set of hierarchical documents are normally generated for a project whereby the requirements of the higher level documents levy requirements on the same level or lower level documents. Traditionally, the requirements are handled almost entirely by manual paper methods. The problem with a typical paper system, however, is that requirements written and changed continuously in different areas lead to misunderstandings and noncompliance. The purpose of TRACER is to automate the capture, tracing, reviewing, and managing of requirements for an engineering project. The engineering project still requires communications, negotiations, interactions, and iterations among people and organizations, but TRACER promotes succinct and precise identification and treatment of real requirements separate from the descriptive prose in a document. TRACER permits the documentation of an engineering project's requirements and progress in a logical, controllable, traceable manner. TRACER's attributes include the presentation of current requirements and status from any linked computer terminal and the ability to differentiate headers and descriptive material from the requirements. Related requirements can be linked and traced. The program also enables portions of documents to be printed, individual approval and release of requirements, and the tracing of requirements down into the equipment specification. Requirement "links" can be made "pending" and invisible to others until the pending link is made "binding". Individuals affected by linked requirements can be notified of significant changes with acknowledgement of the changes required. An unlimited number of documents can be created for a project and an ASCII import feature permits existing documents to be incorporated. TRACER can automatically renumber section headers when inserting or deleting sections of a document and generate sign-off forms for any approval process as well as a table of contents. TRACER was implemented on an IBM PC under PC-DOS. The program requires 640K RAM, a hard disk, and PC-DOS version 3.3 or higher. It was written in CLIPPER (Summer '87). TRACER is available on two 5.25 inch 1.2Mb MS-DOS format diskettes. The executable program is also provided with the distribution. TRACER is a copyrighted work with all copyright vested in the National Aeronautics and Space Administration. IBM PC and PC-DOS are registered trademarks of International Business Machines. CLIPPER is a trademark of Nantucket Corporation.
Schema for the LANL infrasound analysis tool, infrapy
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dannemann, Fransiska Kate; Marcillo, Omar Eduardo
2017-04-14
The purpose of this document is to define the schema used for the operation of the infrasound analysis tool, infrapy. The tables described by this document extend the CSS3.0 or KB core schema to include information required for the operation of infrapy. This document is divided into three sections, the first being this introduction. Section two defines eight new, infrasonic data processing-specific database tables. Both internal (ORACLE) and external formats for the attributes are defined, along with a short description of each attribute. Section three of the document shows the relationships between the different tables by using entity-relationship diagrams.
Views on computer program documentation and automation
NASA Technical Reports Server (NTRS)
Grosch, H. R.
1970-01-01
Various aspects of the problem of program documentation and description are discussed. Particular emphasis is placed on the problem of semantics. It is pointed out that the information produced by documentation of a program, if presented to several different groups, may mean entirely different things to these groups. Recognition of the fact that people look at problems differently is proposed as a more practical approach to the problem of documentation rather than extensive use of standards or strict formatting. The difficulties involved in searching for ways to provide a common ground for the transmission and use of information are discussed.
2004-07-01
sampler, project manager, data reviewer, statistician , risk assessor, assessment personnel, and laboratory QC manager. In addition, a complete copy of...sample • Corrective actions to be taken if the QC sample fails these criteria • A description of how the QC data and results are to be documented and...Intergovernmental Data Quality Task Force Uniform Federal Policy for Quality Assurance Project Plans Evaluating, Assessing, and Documenting
NASA visual thesaurus maintenance documentation
NASA Technical Reports Server (NTRS)
1989-01-01
The following document is presented in six sections: (1) introduction; (2) a diagram showing how the various routines are grouped together into functional modules; (3) a printout of all the layouts in the system along with their associated layout procedures; (4) listings of all the global procedures in the system; (5) a cross-reference of all identifiers used in the system; and (6) descriptions of the external procedures used in the system. The document was prepared at the Project ICON Image Scaling Laboratory.
Consolidated Cab Display (CCD) System, Project Planning Document (PPD),
1981-02-01
1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD
Title list of documents made publicly available: December 1--31, 1996. Volume 18, Number 12
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1997-03-01
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.
Title List of documents made publicly available, September 1--30, 1993. Volume 15, No. 9
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-11-01
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principals Documents.
Title list of documents made publicly available: November 1--30, 1997. Volume 19, Number 11
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate source, Report Number, and Cross Reference of Enclosures to Principal Documents.
NASA Technical Reports Server (NTRS)
Suarez, Max J. (Editor); Takacs, Lawrence L.; Molod, Andrea; Wang, Tina
1994-01-01
This technical report documents Version 1 of the Goddard Earth Observing System (GEOS) General Circulation Model (GCM). The GEOS-1 GCM is being used by NASA's Data Assimilation Office (DAO) to produce multiyear data sets for climate research. This report provides a documentation of the model components used in the GEOS-1 GCM, a complete description of model diagnostics available, and a User's Guide to facilitate GEOS-1 GCM experiments.
Enei Gahona, Maria Leonor; Machado Filho, Carlos d' Aparecida Santos
2012-01-01
Through iconography, we show a case of keratoacanthoma (KA) on the nasal dorsum at two different stages of evolution (maturation and regression) and its similarity with images of the Mount St. Helens volcano and the Orcus Patera crater. Using these illustrations, we highlight why the crateriform aspect of this tumor is included in its classic clinical description. Moreover, we photographically documented the self-involuting tendency of KA, an aspect that is seldom documented in the literature.
A Case Study on Teaching of Energy as a Subject for 9th Graders
ERIC Educational Resources Information Center
Bezen, Sevim; Bayrak, Celal; Aykutlu, Isil
2017-01-01
This study aims to describe how energy subject is taught in 9th grades. The study is designed as a descriptive case study with the participation of 3 physics teachers and 85 students. Data were obtained through observation, interviews, and documents, and they were analyzed through descriptive analysis method. In the observations made at the…
ERIC Educational Resources Information Center
Brusco, Bernadette A.
One of a series of studies, this monograph presents descriptive information to provide an understanding of the present budgetary system for Community Mental Health Centers (CMHCs) as it relates to Mexican Americans in Texas. The document: (1) provides a description of federal and state laws and their historical evolution germane to the funding of…
Ge, Kui; Wu, Minjie; Liu, Hu; Gong, Jiahong; Zhang, Yi; Hu, Qiang; Fang, Min; Tao, Yanping; Cai, Minqiang; Chen, Hua; Wang, Jianbo; Xie, Ting; Lu, Shuliang
2015-06-01
The increasing numbers of cases of wound disease are now posing a big challenge in China. For more convenience of wound patients, wound management in community health care centers under the supervision of a specialist at general hospitals is an ideal solution. To ensure an accurate diagnosis in community health clinics, it is important that "the same language" for wound description, which may be composed of unified format description, including wound image, must be achieved. We developed a wound information management system that was built up by acquisition terminal, wound description, data bank, and related software. In this system, a 3G mobile phone was applied as acquisition terminal, which could be used to access to the data bank. This documentation system was thought to be an appropriate proposal for community wound care because of its objectivity, uniformity, and facilitation. It also provides possibility for epidemiological study in the future. © The Author(s) 2014.
Natural Channel Design Review Checklist
This document presents a brief description of the checklist items by the following sections: Watershed and Geomorphic Assessment, Preliminary Design, Final Design, and Maintenance and Monitoring Plans.
Description of the AILS Alerting Algorithm
NASA Technical Reports Server (NTRS)
Samanant, Paul; Jackson, Mike
2000-01-01
This document provides a complete description of the Airborne Information for Lateral Spacing (AILS) alerting algorithms. The purpose of AILS is to provide separation assurance between aircraft during simultaneous approaches to closely spaced parallel runways. AILS will allow independent approaches to be flown in such situations where dependent approaches were previously required (typically under Instrument Meteorological Conditions (IMC)). This is achieved by providing multiple levels of alerting for pairs of aircraft that are in parallel approach situations. This document#s scope is comprehensive and covers everything from general overviews, definitions, and concepts down to algorithmic elements and equations. The entire algorithm is presented in complete and detailed pseudo-code format. This can be used by software programmers to program AILS into a software language. Additional supporting information is provided in the form of coordinate frame definitions, data requirements, calling requirements as well as all necessary pre-processing and post-processing requirements. This is important and required information for the implementation of AILS into an analysis, a simulation, or a real-time system.
Radice, Marcela; Marín, Marcelo; Giovanakis, Marta; Vay, Carlos; Almuzara, Marisa; Limansky, Adriana; Casellas, José M; Famiglietti, Angela; Quinteros, Mirta; Bantar, Carlos; Galas, Marcelo; Kovensky Pupko, Jaime; Nicola, Federico; Pasterán, Fernando; Soloaga, Rolando; Gutkind, Gabriel
2011-01-01
This document contains the recommendations for antimicrobial susceptibility testing of the clinically relevant non-fermenting gram-negative bacilli (NFGNB), adopted after conforming those from international committees to the experience of the Antimicrobial Agents Subcommittee members and invited experts. This document includes an update on NFGNB classification and description, as well as some specific descriptions regarding natural or frequent antimicrobial resistance and a brief account of associated resistance mechanisms. These recommendations not only suggest the antimicrobial drugs to be evaluated in each case, but also provide an optimization of the disk diffusion layout and a selection of results to be reported. Finally, this document also includes a summary of the different methodological approaches that may be used for detection and confirmation of emerging b-lactamases, such as class A and B carbapenemases.
NASA Technical Reports Server (NTRS)
Switzer, George F.
2008-01-01
This document contains a general description for data sets of a wake vortex system in a turbulent environment. The turbulence and thermal stratification of the environment are representative of the conditions on November 12, 2001 near John F. Kennedy International Airport. The simulation assumes no ambient winds. The full three dimensional simulation of the wake vortex system from a Boeing 747 predicts vortex circulation levels at 80% of their initial value at the time of the proposed vortex encounter. The linked vortex oval orientation showed no twisting, and the oval elevations at the widest point were about 20 meters higher than where the vortex pair joined. Fred Proctor of NASA?s Langley Research Center presented the results from this work at the NTSB public hearing that started 29 October 2002. This document contains a description of each data set including: variables, coordinate system, data format, and sample plots. Also included are instructions on how to read the data.
NASA Technical Reports Server (NTRS)
1983-01-01
The space station mission requirements data base consists of 149 attached and free-flying missions each of which is documented by a set of three interrelated documents: (1) NASA LaRC Data Sheets - with three sheets comprising a set for each payload element described. These sheets contain user payload element data necessary to drive Space Station architectural options. (2) GDC-derived operations descriptions that supplement the LaRC payload element data in the operations areas such as further descriptions of crew involvement, EVA, etc. (3) Payload elements synthesis sheets used by GDC to provide requirements traceability to data sources and to provide a narrative describing the basis for formulating the payload element requirements.
Documentation of Apollo 15 samples
NASA Technical Reports Server (NTRS)
Sutton, R. L.; Hait, M. H.; Larson, K. B.; Swann, G. A.; Reed, V. S.; Schaber, G. G.
1972-01-01
A catalog is presented of the documentation of Apollo 15 samples using photographs and verbal descriptions returned from the lunar surface. Almost all of the Apollo 15 samples were correlated with lunar surface photographs, descriptions, and traverse locations. Where possible, the lunar orientations of rock samples were reconstructed in the lunar receiving laboratory, using a collimated light source to reproduce illumination and shadow characteristics of the same samples shown in lunar photographs. In several cases, samples were not recognized in lunar surface photographs, and their approximate locations are known only by association with numbered sample bags used during their collection. Tables, photographs, and maps included in this report are designed to aid in the understanding of the lunar setting of the Apollo 15 samples.
ERIC Educational Resources Information Center
Sutton, John D.
This report documents a profit-maximizing linear programming (LP) model of a farm typical of a major corn-soybean producing area in the Southern Michigan-Northern Indiana Drift Plain. Following an introduction, a complete description of the farm is provided. The next section presents the LP model, which is structured to help analyze after-tax…
Computer program for Stirling engine performance calculations
NASA Technical Reports Server (NTRS)
Tew, R. C., Jr.
1983-01-01
The thermodynamic characteristics of the Stirling engine were analyzed and modeled on a computer to support its development as a possible alternative to the automobile spark ignition engine. The computer model is documented. The documentation includes a user's manual, symbols list, a test case, comparison of model predictions with test results, and a description of the analytical equations used in the model.
ERIC Educational Resources Information Center
Hawaii State Dept. of Education, Honolulu. Office of the Director for Vocational Education.
Intended for administrators of schools within the Hawaii Department of Education, this document provides descriptions of 34 alternative strategies implemented by small, rural, and/or isolated secondary schools across the nation to improve the quality of their vocational programs. Introductory materials discuss the document's purpose, the need for…
36 CFR § 1238.14 - What are the microfilming requirements for permanent and unscheduled records?
Code of Federal Regulations, 2013 CFR
2013-07-01
... processing procedures in ANSI/AIIM MS1 and ANSI/AIIM MS23 (both incorporated by reference, see § 1238.5). (d... reference, see § 1238.5). (2) Background density of images. Agencies must use the background ISO standard... densities for images of documents are as follows: Classification Description of document Background density...
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This document consists of a list of projects supporting work on oil recovery programs. A publications list and index of companies and institutions is provided. The remaining portion of the document provides brief descriptions on projects in chemical flooding, gas displacement, thermal recovery, geoscience, resource assessment, and reservoir class field demonstrations.
ERIC Educational Resources Information Center
Lavoie, Yolande
This document presents descriptive information and statistics on teachers in Quebec from 1965-66 to 1971-72. The overall intent of this study is described as a complete presentation of information on teachers and a review of their individual characteristics with particular attention paid to the level of teaching, experience, and training.…
Cutting Edge Discoveries for the 2015: Capsule of a History and Philosophy of Andragogy
ERIC Educational Resources Information Center
Henschke, John A.
2015-01-01
This 2015 updated capsule on a History and Philosophy of Andragogy includes nine new items and is mainly limited [with a few exceptions] to a chronological history and the accompanying philosophy of andragogy, in line with when the English language documents were published and personal descriptions of events were recorded. Some of these documents,…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-18
.... A request for such a waiver has been received by MARAD. The vessel, and a brief description of the... 10 a.m. and 5 p.m., E.T., Monday through Friday, except federal holidays. An electronic version of this document and all documents entered into this docket is available on the World Wide Web at http...
Space Technology-5 Lithium-Ion Battery Design, Qualification and Integration and Testing
NASA Technical Reports Server (NTRS)
Rao, Gopalakishna M.; Stewart, Karen; Ameen, Syed; Banfield, Peter K.
2005-01-01
This document is a viewgraph presentation that reviews the Lithium Ion Battery for the Space Technology-5 (ST-5) mission. Included in the document is a review of the ST-5 Mission, a review of the battery requirements, a description of the battery and the battery materials. The testing and the integration and qualification data is reviewed.
ERIC Educational Resources Information Center
Seefeldt, Steve, Comp.
Provided in this document are descriptions of reforestation projects and techniques presented by Peace Corps volunteers from Chad, Ivory Coast, Upper Volta, and Niger. The purpose of the document is to aid individuals in trying to find solutions to the problems facing forestry in the Sahel. These projects include: (1) reforestation of Ronier palm…
Proposal for hierarchical description of software systems
NASA Technical Reports Server (NTRS)
Thauboth, H.
1973-01-01
The programming of digital computers has developed into a new dimension full of diffculties, because the hardware of computers has become so powerful that more complex applications are entrusted to computers. The costs of software development, verification, and maintenance are outpacing those of the hardware and the trend is toward futher increase of sophistication of application of computers and consequently of sophistication of software. To obtain better visibility into software systems and to improve the structure of software systems for better tests, verification, and maintenance, a clear, but rigorous description and documentation of software is needed. The purpose of the report is to extend the present methods in order to obtain a documentation that better reflects the interplay between the various components and functions of a software system at different levels of detail without losing the precision in expression. This is done by the use of block diagrams, sequence diagrams, and cross-reference charts. In the appendices, examples from an actual large sofware system, i.e. the Marshall System for Aerospace Systems Simulation (MARSYAS), are presented. The proposed documentation structure is compatible to automation of updating significant portions of the documentation for better software change control.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ekechukwu, A.
This document proposes to provide a listing of available sources which can be used to validate analytical methods and/or instrumentation for beryllium determination. A literature review was conducted of available standard methods and publications used for method validation and/or quality control. A comprehensive listing of the articles, papers, and books reviewed is given in Appendix 1. Available validation documents and guides are listed in the appendix; each has a brief description of application and use. In the referenced sources, there are varying approaches to validation and varying descriptions of validation at different stages in method development. This discussion focuses onmore » validation and verification of fully developed methods and instrumentation that have been offered up for use or approval by other laboratories or official consensus bodies such as ASTM International, the International Standards Organization (ISO) and the Association of Official Analytical Chemists (AOAC). This review was conducted as part of a collaborative effort to investigate and improve the state of validation for measuring beryllium in the workplace and the environment. Documents and publications from the United States and Europe are included. Unless otherwise specified, all documents were published in English.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ritchie, L.T.; Alpert, D.J.; Burke, R.P.
1984-03-01
The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.
Emergency department documentation of alleged excessive use of force.
Strote, Jared; Verzemnieks, Erik; Walsh, Mimi
2013-12-01
Patients' complaints of excessive use of force (EUOF) by police occur frequently in emergency departments (EDs). Limited, if any, education or guidelines exist for documenting alleged EUOF despite extensive instruction for other forms of potential abuse or assault. Our objective was to examine the documentation by ED staff when patients complained of EUOF. A retrospective cohort design was used, identifying every use of force over a 1-year period by a single law enforcement agency that was followed by an ED visit within 24 hours. Charts were then analyzed for complaints of excessive force. For these cases, documentation was evaluated using standards for other forms of abuse and assault. Of 187 ED visits, 32 (17%) involved patients who were unable to give a history and 20 (11%) had nontrauma evaluations only. Of the remaining 135, there were 13 documented complaints (10%) of EUOF. Of these, 8 complaints (62%) described the mechanism of injury completely and 10 complaints (77%) had a complete description of the injury. No charts discussed whether the examination was consistent with the history. Inappropriate subjective terminology was used in 7 charts (54%), and the police description of events was described as fact in 7 charts (54%). Guilt was assigned in 5 charts (39%). In one ED, EUOF complaints were not documented to the standards for other forms of alleged assault and abuse. There may be a benefit to further education and guidelines on how to deal with ED presentations of EUOF.
NASA Astrophysics Data System (ADS)
Stalcup, Bruce W.; Dennis, Phillip W.; Dydyk, Robert B.
1999-10-01
Litton PRC and Litton Data Systems Division are developing a system, the Imaged Document Optical Correlation and Conversion System (IDOCCS), to provide a total solution to the problem of managing and retrieving textual and graphic information from imaged document archives. At the heart of IDOCCS, optical correlation technology provides the search and retrieval of information from imaged documents. IDOCCS can be used to rapidly search for key words or phrases within the imaged document archives. In addition, IDOCCS can automatically compare an input document with the archived database to determine if it is a duplicate, thereby reducing the overall resources required to maintain and access the document database. Embedded graphics on imaged pages can also be exploited; e.g., imaged documents containing an agency's seal or logo can be singled out. In this paper, we present a description of IDOCCS as well as preliminary performance results and theoretical projections.
Seamless Management of Paper and Electronic Documents for Task Knowledge Sharing
NASA Astrophysics Data System (ADS)
Kojima, Hiroyuki; Iwata, Ken
Due to the progress of Internet technology and the increase of distributed information on networks, the present knowledge management has been based more and more on the performance of various experienced users. In addition to the increase of electronic documents, the use of paper documents has not been reduced because of their convenience. This paper describes a method of tracking paper document locations and contents using radio frequency identification (RFID) technology. This research also focuses on the expression of a task process and the seamless structuring of related electronic and paper documents as a result of task knowledge formalization using information organizing. A system is proposed here that implements information organization for both Web documents and paper documents with the task model description and RFID technology. Examples of a prototype system are also presented.
ERIC Educational Resources Information Center
Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.
This curriculum guide begins with an introduction, course description, and description of the occupation of commercial fish farmer. A course outline covers five units: starting a business, establishing the fish farm, managing the enterprise, harvesting the fish, and administering the business. For each unit, the following are provided: terminal…
ERIC Educational Resources Information Center
Ruffio, Philippe; Heinamaki, Piia; Tchoukaline, Claire Chastang; Manthey, Anja; Reichboth, Veronika
2011-01-01
The attached descriptions of higher education systems in the Tempus partner countries provide a tool for those who are either planning or already carrying out projects within Tempus. This document forms part of a series of four publications which have been produced for each of the regions covered by Tempus. The descriptions have been drafted by…
ERIC Educational Resources Information Center
Ruffio, Philippe; Heinamaki, Piia; Tchoukaline, Claire Chastang; Manthey, Anja; Reichboth, Veronika
2011-01-01
The attached descriptions of higher education systems in the Tempus partner countries provide a tool for those who are either planning or already carrying out projects within Tempus. This document forms part of a series of four publications which have been produced for each of the regions covered by Tempus. The descriptions have been drafted by…
ERIC Educational Resources Information Center
Kocanova, Daniela
2015-01-01
This inventory of adult basic education and basic skills programmes takes the form of 35 system descriptions, covering 32 countries (all EU Member States as well as Iceland, Liechtenstein, Norway and Turkey). Its main goal is to support mutual understanding and dialogue between countries. The document has been drafted on the basis of a standalone…
Model documentation report: Transportation sector model of the National Energy Modeling System
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1994-03-01
This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Transportation Model (TRAN). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated by the model. This document serves three purposes. First, it is a reference document providing a detailed description of TRAN for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports (Public Law 93-275, 57(b)(1)). Third, it permits continuity inmore » model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.
Making automated computer program documentation a feature of total system design
NASA Technical Reports Server (NTRS)
Wolf, A. W.
1970-01-01
It is pointed out that in large-scale computer software systems, program documents are too often fraught with errors, out of date, poorly written, and sometimes nonexistent in whole or in part. The means are described by which many of these typical system documentation problems were overcome in a large and dynamic software project. A systems approach was employed which encompassed such items as: (1) configuration management; (2) standards and conventions; (3) collection of program information into central data banks; (4) interaction among executive, compiler, central data banks, and configuration management; and (5) automatic documentation. A complete description of the overall system is given.
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
Volume VII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the tritium transport model documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.
Integrated palliative care in the Spanish context: a systematic review of the literature.
Garralda, Eduardo; Hasselaar, Jeroen; Carrasco, José Miguel; Van Beek, Karen; Siouta, Naouma; Csikos, Agnes; Menten, Johan; Centeno, Carlos
2016-05-13
Integrated palliative care (IPC) involves bringing together administrative, organisational, clinical and service aspects in order to achieve continuity of care between all actors involved in the care network of patients receiving palliative care (PC) services. The purpose of this study is to identify literature on IPC in the Spanish context, either in cancer or other advanced chronic diseases. Systematic review of the literature about IPC published in Spain between 1995 and 2013. Sources searched included PubMed, Cochrane Library, Cinahl, the national palliative care Journal (Medicina Paliativa), and Google. Evidence on IPC in care models, pathways, guidelines and other relevant documents were searched. Additionally, data were included from expert sources. Elements of IPC were considered based on the definition of IPC and the Emmanuel´s IPC tool. The main inclusion criterion was a comprehensive description of PC integration. Out of a total of 2,416 titles screened, 49 were included. We found two models describing IPC interventions achieving continuity and appropriateness of care as a result, 12 guidelines or pathways (most of them with a general approach including cancer and non-cancer and showing a theoretical IPC inclusion as measured by Emmanuel's tool) and 35 other significant documents as for their context relevance (17 health strategy documents, 14 analytical studies and 4 descriptive documents). These last documents comprised respectively: regional and national plans with an IPC inclusion evidence, studies focused on IPC into primary care and resource utilisation; and descriptions of fruitful collaboration programmes between PC teams and oncology departments. The results show that explications of IPC in the Spanish literature exist, but that there is insufficient evidence of its impact in clinical practice. This review may be of interest for Spanish-speaking countries and for others seeking to know the status of IPC in the literature in their home nations.
Code of Federal Regulations, 2011 CFR
2011-07-01
... institution engaged in research concerning the social, biological, or physical sciences or an instructor or... descriptive terms which permit an Agency employee to locate documents with reasonable effort given existing...
Code of Federal Regulations, 2010 CFR
2010-07-01
... institution engaged in research concerning the social, biological, or physical sciences or an instructor or... descriptive terms which permit an Agency employee to locate documents with reasonable effort given existing...
Code of Federal Regulations, 2013 CFR
2013-07-01
... institution engaged in research concerning the social, biological, or physical sciences or an instructor or... descriptive terms which permit an Agency employee to locate documents with reasonable effort given existing...
Code of Federal Regulations, 2014 CFR
2014-07-01
... institution engaged in research concerning the social, biological, or physical sciences or an instructor or... descriptive terms which permit an Agency employee to locate documents with reasonable effort given existing...
Code of Federal Regulations, 2012 CFR
2012-07-01
... institution engaged in research concerning the social, biological, or physical sciences or an instructor or... descriptive terms which permit an Agency employee to locate documents with reasonable effort given existing...
Frequency Domain Identification Toolbox
NASA Technical Reports Server (NTRS)
Horta, Lucas G.; Juang, Jer-Nan; Chen, Chung-Wen
1996-01-01
This report documents software written in MATLAB programming language for performing identification of systems from frequency response functions. MATLAB is a commercial software environment which allows easy manipulation of data matrices and provides other intrinsic matrix functions capabilities. Algorithms programmed in this collection of subroutines have been documented elsewhere but all references are provided in this document. A main feature of this software is the use of matrix fraction descriptions and system realization theory to identify state space models directly from test data. All subroutines have templates for the user to use as guidelines.
New Action of Inhibin Alpha Subunit in Advanced Prostate Cancer
2010-02-01
official Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form...also used monoclonal R1 antibody to determine INHA expression in tumors. For detailed description of the methodology see Appendix 1. Positive...the LVD in the intratumoral regions with no difference in LVD in peritumoral and surrounding non -malignant regions of INHA- positive tumors compared
ERIC Educational Resources Information Center
Susilana, Rudi; Asra; Herlina
2014-01-01
The aim of this study is to describe how the self-efficacy of curriculum development team (CDT) and curriculum document quality contributed to the implementation of diversified curriculum in elementary schools. This research is a survey study using descriptive method. Schools were the unit of analysis while respondents selected from the schools…
with Search To search for a document, type a few descriptive words in the search box, and press the Enter key or click the search button. A results page appears with a list of documents and web pages that are related to your search terms, with the most relevant search results appearing at the top of the
ERIC Educational Resources Information Center
Winkeljohann, Rosemary, Comp.
This selective bibliography is one of nine documents compiled to provide titles and descriptions of useful and informative reading documents which were indexed into the ERIC system from 1966 to 1974. The 245 entries in this section of the bibliography concern reading materials and are arranged alphabetically by author in one of the following 12…
ERIC Educational Resources Information Center
Winkeljohann, Rosemary, Comp.
This selective bibliography is one of nine documents compiled to provide titles and descriptions of useful and informative reading documents which were indexed into the ERIC system from 1966 to 1974. The 190 entries in this section of the bibliography concern methods in teaching reading and are arranged alphabetically by author in one of the…
Econ's optimal decision model of wheat production and distribution-documentation
NASA Technical Reports Server (NTRS)
1977-01-01
The report documents the computer programs written to implement the ECON optical decision model. The programs were written in APL, an extremely compact and powerful language particularly well suited to this model, which makes extensive use of matrix manipulations. The algorithms used are presented and listings of and descriptive information on the APL programs used are given. Possible changes in input data are also given.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas
This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas
This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.
SINGLE HEATER TEST FINAL REPORT
DOE Office of Scientific and Technical Information (OSTI.GOV)
J.B. Cho
The Single Heater Test is the first of the in-situ thermal tests conducted by the U.S. Department of Energy as part of its program of characterizing Yucca Mountain in Nevada as the potential site for a proposed deep geologic repository for the disposal of spent nuclear fuel and high-level nuclear waste. The Site Characterization Plan (DOE 1988) contained an extensive plan of in-situ thermal tests aimed at understanding specific aspects of the response of the local rock-mass around the potential repository to the heat from the radioactive decay of the emplaced waste. With the refocusing of the Site Characterization Planmore » by the ''Civilian Radioactive Waste Management Program Plan'' (DOE 1994), a consolidated thermal testing program emerged by 1995 as documented in the reports ''In-Situ Thermal Testing Program Strategy'' (DOE 1995) and ''Updated In-Situ Thermal Testing Program Strategy'' (CRWMS M&O 1997a). The concept of the Single Heater Test took shape in the summer of 1995 and detailed planning and design of the test started with the beginning fiscal year 1996. The overall objective of the Single Heater Test was to gain an understanding of the coupled thermal, mechanical, hydrological, and chemical processes that are anticipated to occur in the local rock-mass in the potential repository as a result of heat from radioactive decay of the emplaced waste. This included making a priori predictions of the test results using existing models and subsequently refining or modifying the models, on the basis of comparative and interpretive analyses of the measurements and predictions. A second, no less important, objective was to try out, in a full-scale field setting, the various instruments and equipment to be employed in the future on a much larger, more complex, thermal test of longer duration, such as the Drift Scale Test. This ''shake down'' or trial aspect of the Single Heater Test applied not just to the hardware, but also to the teamwork and cooperation between multiple organizations performing their part in the test.« less
Hanford Site National Environmental Policy Act (NEPA) Characterization Report, Revision 17
DOE Office of Scientific and Technical Information (OSTI.GOV)
Neitzel, Duane A.; Bunn, Amoret L.; Cannon, Sandra D.
2005-09-30
This document describes the U.S. Department of Energy’s (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many environmental documents being prepared by DOE contractors concerning the National Environmental Policy Act (NEPA). No statements about significance or environmental consequences are provided. This year’s report is the seventeenth revision of the original document published in 1988 and is (until replaced by the eighteenth revision) the only version that is relevant for use in the preparation of Hanford NEPA, State Environmental Policy Act (SEPA), and Comprehensive Environmentalmore » Response, Compensation, and Liability Act (CERCLA) documents. The two chapters included in this document (Chapters 4 and 6) are numbered to correspond to the chapters where such information is typically presented in environmental impact statements (EISs) and other Hanford Site NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology; air quality; geology; hydrology; ecology; cultural, archaeological, and historical resources; socioeconomics; noise; and occupational health and safety. Sources for extensive tabular data related to these topics are provided in the chapter. Most subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, of the 100, 200, 300, and other areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) describes federal and state laws and regulations, DOE directives and permits, and presidential executive orders that are applicable to the NEPA documents prepared for Hanford Site activities. Information in Chapter 6 of this document can be adapted and supplemented with specific information for a chapter covering statutory and regulatory requirements in an environmental assessment or environmental impact statement. When preparing environmental assessments and EISs, authors should also be cognizant of the document titled Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements published by the DOE Office of NEPA Oversight (DOE 2004). Additional guidance on preparing DOE NEPA documents can be found at http://tis.eh.doe.gov/nepa/guidance.html. Any interested individual seeking baseline data on the Hanford Site and its past activities may also use the information contained in this document to evaluate projected activities and their impacts. For this 2005 revision, the following sections of the document were reviewed by the authors and updated with the best available information through May 2005: Climate and Meteorology Air Quality Geology – Seismicity section only Hydrology – Flow charts for the Columbia and Yakima rivers only Ecology – Threatened and Endangered Species subsection only Socioeconomics Occupational Safety All of Chapter 6.« less
Atmospheric Science Data Center
2013-04-29
... Basis Documents . Images available on this web site include the following parameters: Image Description ... DHR integrated over the Photosynthetically Active Radiation (PAR) band. For those familiar with the MISR Level 2 ...
National Grants: 2012-2017 RFPs & Documents
Request for Proposals, project narrative sample, application fleet description sample, priority county list, sample drayage, model years for eligible nonroad engines, marine engine eligibility, frequently asked questions, and webinar slides
National Grants: 2012-2018 RFPs & Documents
Request for Proposals, project narrative sample, application fleet description sample, priority county list, sample drayage, model years for eligible nonroad engines, marine engine eligibility, frequently asked questions, and webinar slides
Inventory Data Package for Hanford Assessments
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kincaid, Charles T.; Eslinger, Paul W.; Aaberg, Rosanne L.
2006-06-01
This document presents the basis for a compilation of inventory for radioactive contaminants of interest by year for all potentially impactive waste sites on the Hanford Site for which inventory data exist in records or could be reasonably estimated. This document also includes discussions of the historical, current, and reasonably foreseeable (1944 to 2070) future radioactive waste and waste sites; the inventories of radionuclides that may have a potential for environmental impacts; a description of the method(s) for estimating inventories where records are inadequate; a description of the screening method(s) used to select those sites and contaminants that might makemore » a substantial contribution to impacts; a listing of the remedial actions and their completion dates for waste sites; and tables showing the best estimate inventories available for Hanford assessments.« less
Documentation of the Benson Diesel Engine Simulation Program
NASA Technical Reports Server (NTRS)
Vangerpen, Jon
1988-01-01
This report documents the Benson Diesel Engine Simulation Program and explains how it can be used to predict the performance of diesel engines. The program was obtained from the Garrett Turbine Engine Company but has been extensively modified since. The program is a thermodynamic simulation of the diesel engine cycle which uses a single zone combustion model. It can be used to predict the effect of changes in engine design and operating parameters such as valve timing, speed and boost pressure. The most significan change made to this program is the addition of a more detailed heat transfer model to predict metal part temperatures. This report contains a description of the sub-models used in the Benson program, a description of the input parameters and sample program runs.
Inglis, Joshua M; Caughey, Gillian E; Smith, William; Shakib, Sepehr
2017-11-01
The majority of patients with penicillin allergy labels tolerate penicillins. Inappropriate avoidance of penicillin is associated with increased hospitalisation, infections and healthcare costs. To examine the documentation of penicillin adverse drug reactions (ADR) in a large-scale hospital-based electronic health record. Penicillin ADR were extracted from 96 708 patient records in the Enterprise Patient Administration System in South Australia. Expert criteria were used to determine consistency of ADR entry and suitability for further evaluation. Of 43 011 unique ADR reports, there were 5023 ADR to penicillins with most being entered as allergy (n = 4773, 95.0%) rather than intolerance (n = 250, 5.0%). A significant proportion did not include a reaction description (n = 1052, 20.9%). Using pre-set criteria, 10.1% of reports entered as allergy had a reaction description that was consistent with intolerance and 31.0% of the entered intolerances had descriptions consistent with allergy. Virtually all ADR (n = 4979, 99.1%) were appropriate for further evaluation by history taking or immunological testing and half (50.7%, n = 2549) had documented reactions suggesting low-risk of penicillin allergy. The frequency of penicillin allergy label in this data set is consistent with the known overdiagnosis of penicillin allergy in the hospital population. ADR documentation was poor with incomplete entries and inconsistent categorisation. The concepts of allergy and intolerance for ADR classification, whilst mechanistically valid, may not be useful at the point of ADR entry by generalist clinicians. Systematic evaluation of reported ADR is needed to improve the quality of information for future prescribers. © 2017 Royal Australasian College of Physicians.
Van Hoof, Thomas J; Miller, Nicole E; Meehan, Thomas P
2013-01-01
Educational outreach is a common intervention used to translate research findings into practice; however, the intervention has a mixed effect on changing clinician behavior and improving patient outcomes. Based on a published set of characteristics aimed at standardizing the approach to educational outreach, the authors undertook a careful review of the literature to determine the consistency and completeness of documentation. Using a 25-item abstraction tool, the authors reviewed 68 published studies of a recent Cochrane meta-analysis to determine the extent to which educational outreach studies provide recommended documentation of important characteristics. The results indicate that studies are generally inconsistent (documentation range of 0% to 100% across characteristics) and incomplete (documentation average of 43.1% across studies) in their descriptions. Documentation shortcomings of educational outreach studies make understanding the intervention and interpreting its findings particularly challenging. The authors recommend the creation of a guideline to help improve documentation of educational outreach efforts.
Automated software system for checking the structure and format of ACM SIG documents
NASA Astrophysics Data System (ADS)
Mirza, Arsalan Rahman; Sah, Melike
2017-04-01
Microsoft (MS) Office Word is one of the most commonly used software tools for creating documents. MS Word 2007 and above uses XML to represent the structure of MS Word documents. Metadata about the documents are automatically created using Office Open XML (OOXML) syntax. We develop a new framework, which is called ADFCS (Automated Document Format Checking System) that takes the advantage of the OOXML metadata, in order to extract semantic information from MS Office Word documents. In particular, we develop a new ontology for Association for Computing Machinery (ACM) Special Interested Group (SIG) documents for representing the structure and format of these documents by using OWL (Web Ontology Language). Then, the metadata is extracted automatically in RDF (Resource Description Framework) according to this ontology using the developed software. Finally, we generate extensive rules in order to infer whether the documents are formatted according to ACM SIG standards. This paper, introduces ACM SIG ontology, metadata extraction process, inference engine, ADFCS online user interface, system evaluation and user study evaluations.
Report of the LSPI/NASA Workshop on Lunar Base Methodology Development
NASA Technical Reports Server (NTRS)
Nozette, Stewart; Roberts, Barney
1985-01-01
Groundwork was laid for computer models which will assist in the design of a manned lunar base. The models, herein described, will provide the following functions for the successful conclusion of that task: strategic planning; sensitivity analyses; impact analyses; and documentation. Topics addressed include: upper level model description; interrelationship matrix; user community; model features; model descriptions; system implementation; model management; and plans for future action.
DIVWAG Model Documentation. Volume II. Programmer/Analyst Manual. Part 4.
1976-07-01
Model Constant Data Deck Structure . .. .... IV-13-A-40 Appendix B. Movement Model Program Descriptions . .. .. . .IV-13-B-1 1. Introduction...Data ................ IV-15-A-17 11. Airmobile Constant Data Deck Structure .. ...... .. IV-15-A-30 Appendix B. Airmobile Model Program Descriptions...Make no changes. 12. AIRMOBILE CONSTANT DATA DECK STRUCTURE . The deck structure required by the Airmobile Model constant data load program and the data
Spacecraft System Integration and Test: SSTI Lewis critical design audit
NASA Technical Reports Server (NTRS)
Brooks, R. P.; Cha, K. K.
1995-01-01
The Critical Design Audit package is the final detailed design package which provides a comprehensive description of the SSTI mission. This package includes the program overview, the system requirements, the science and applications activities, the ground segment development, the assembly, integration and test description, the payload and technology demonstrations, and the spacecraft bus subsystems. Publication and presentation of this document marks the final requirements and design freeze for SSTI.
The computational structural mechanics testbed procedures manual
NASA Technical Reports Server (NTRS)
Stewart, Caroline B. (Compiler)
1991-01-01
The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.
A Bibliography of Arroye Center Documents
1994-04-01
Results suggest that the U.S. Army’s close battle Internal Medicine , Pediatrics, Obstetrics/Gynecology, and modernization plan embodied in the...Description of Army. One of the two studies addressed in detail in the the Marijuana Trade. M. T. Childress. Oct 1992. report examined the frequency of...prevent most fratricides. Another study focused on tactical description" of the quantity and flow of marijuana from yeonisneadfudta atog la orlto
Synchronous meteorological satellite system description document, volume 3
NASA Technical Reports Server (NTRS)
Pipkin, F. B.
1971-01-01
The structural design, analysis, and mechanical integration of the synchronous meteorological satellite system are presented. The subjects discussed are: (1) spacecraft configuration, (2) structural design, (3) static load tests, (4) fixed base sinusoidal vibration survey, (5) flight configuration sinusoidal vibration tests, (6) spacecraft acoustic test, and (7) separation and shock test. Descriptions of the auxiliary propulsion subsystem, the apogee boost motor, communications system, and thermal control subsystem are included.
TSCA Inventory Policy and Guidance
A list of numerous policy statements and guidance documents on how to identify certain chemical substances for the purpose of assigning unique and unambiguous descriptions tor each substance listed on the Inventory.
Downtown Waterfront Form-Based Code Workshop
This document is a description of a Smart Growth Implementation Assistance for Coastal Communities project in Marquette, Michigan, to develop a form-based code that would attract and support vibrant development.
ADST, Version Description Document for the BDS-D M1 1.0.0
1992-12-22
1.1 date: 1992/10/01 23:32:59; author: crn-adst; state: Exp; Initial Version RCS file: ./common/include/cig- f /RCS/if...eh~eff.h,v Working file: if...libsrc/libfifo/RCS/ f -enqueue.c,v working file: f_enqueue.c head: 1.1 description: ITO - 6.6.1 baseline revision 1.1 date: 1992/10/01 23:43:13; author...crn-adst; state: Exp; Initial Version RCS file: ./common/libsrc/libfifo/RCS/ f -init.c,v working file: f -init.c head: 1.1 description: ITO - 6.6.1
Idaho traffic collisions, 2004
DOT National Transportation Integrated Search
2004-01-01
Idaho Traffic Collisions 2004 provides an annual description of motor vehicle collision characteristics for Idaho. : This document is used by state and local transportation, law enforcement, health, and other agencies charged with : the responsibilit...
Idaho traffic collisions, 2006
DOT National Transportation Integrated Search
2006-01-01
Idaho Traffic Collisions 2006 provides an annual description of motor vehicle collision characteristics for Idaho. : This document is used by state and local transportation, law enforcement, health, and other agencies charged with : the responsibilit...
Idaho traffic collisions, 2002
DOT National Transportation Integrated Search
2002-01-01
Idaho Traffic Collisions 2002 provides an annual description of motor vehicle collision characteristics for : Idaho. This document is used by state and local transportation, law enforcement, health, and other agencies : charged with the responsibilit...
Idaho traffic collisions, 2003
DOT National Transportation Integrated Search
2003-01-01
Idaho Traffic Collisions 2003 provides an annual description of motor vehicle collision characteristics for Idaho. : This document is used by state and local transportation, law enforcement, health, and other agencies charged with : the responsibilit...
B-Plant Canyon Ventilation Control System Description
DOE Office of Scientific and Technical Information (OSTI.GOV)
MCDANIEL, K.S.
1999-08-31
Project W-059 installed a new B Plant Canyon Ventilation System. Monitoring and control of the system is implemented by the Canyon Ventilation Control System (CVCS). This document describes the CVCS system components which include a Programmable Logic Controller (PLC) coupled with an Operator Interface Unit (OIU) and application software. This document also includes an Alarm Index specifying the setpoints and technical basis for system analog and digital alarms.
Fusion Genes Predict Prostate Cancer Recurrence
2017-10-01
URL for any Internet site(s) that disseminates the results of the research activities. A short description of each site should be provided. It is not...University of Wisconsin System Madison, WI 53715 REPORT DATE: October 2017 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and...policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden
Description of the MHS Health Level 7 Chemistry Laboratory for Public Health Surveillance
2012-09-01
document provides a history of the HL7 chemistry database and its contents, explains the creation of chemistry/serology records, describes the pathway...in health surveillance activities. This technical document discusses the chemistry database by providing a history of the dataset and its contents...source for its usefulness in public health surveillance. While HL7 data also includes radiology, anatomic pathology reports and pharmacy transactions
2008-10-31
SSC Charleston; Mr. David Broyles, SSC Charleston; Dr. Richard Daehler-Wilking, SSC Charleston; Ms. Marcy Stutzman, Northrop Grumman ; and Tammie...PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including...1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington DC 20503. 1 . AGENCY
Rating Training Continuum: Development Procedures
1992-01-01
During the workshop, the SMEs will need to review technical documents to refresh their memory and resolve any technical issues. It is important that a...endorsement. 7 additional memory space was very useful. The computers with the 80-megabyte hard disk drive were used to collect all final PPPs and TLAs...description, general, and documentation). If you reed to refresh your memory , refer to Figure 3-5 for the definitions associated with the indirectly
Content of system design descriptions
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all themore » attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.« less
Dickinson, Jesse; Hanson, R.T.; Mehl, Steffen W.; Hill, Mary C.
2011-01-01
The computer program described in this report, MODPATH-LGR, is designed to allow simulation of particle tracking in locally refined grids. The locally refined grids are simulated by using MODFLOW-LGR, which is based on MODFLOW-2005, the three-dimensional groundwater-flow model published by the U.S. Geological Survey. The documentation includes brief descriptions of the methods used and detailed descriptions of the required input files and how the output files are typically used. The code for this model is available for downloading from the World Wide Web from a U.S. Geological Survey software repository. The repository is accessible from the U.S. Geological Survey Water Resources Information Web page at http://water.usgs.gov/software/ground_water.html. The performance of the MODPATH-LGR program has been tested in a variety of applications. Future applications, however, might reveal errors that were not detected in the test simulations. Users are requested to notify the U.S. Geological Survey of any errors found in this document or the computer program by using the email address available on the Web site. Updates might occasionally be made to this document and to the MODPATH-LGR program, and users should check the Web site periodically.
Creating, documenting and sharing network models.
Crook, Sharon M; Bednar, James A; Berger, Sandra; Cannon, Robert; Davison, Andrew P; Djurfeldt, Mikael; Eppler, Jochen; Kriener, Birgit; Furber, Steve; Graham, Bruce; Plesser, Hans E; Schwabe, Lars; Smith, Leslie; Steuber, Volker; van Albada, Sacha
2012-01-01
As computational neuroscience matures, many simulation environments are available that are useful for neuronal network modeling. However, methods for successfully documenting models for publication and for exchanging models and model components among these projects are still under development. Here we briefly review existing software and applications for network model creation, documentation and exchange. Then we discuss a few of the larger issues facing the field of computational neuroscience regarding network modeling and suggest solutions to some of these problems, concentrating in particular on standardized network model terminology, notation, and descriptions and explicit documentation of model scaling. We hope this will enable and encourage computational neuroscientists to share their models more systematically in the future.
Hanford Site National Environmental Policy Act (NEPA) Characterization
DOE Office of Scientific and Technical Information (OSTI.GOV)
Duncan, Joanne P.; Burk, Kenneth W.; Chamness, Mickie A.
2007-09-27
This document describes the U.S. Department of Energy’s (DOE) Hanford Site environment. It is intended to provide a consistent description of the Hanford Site for the many environmental documents being prepared by DOE contractors concerning the National Environmental Policy Act (NEPA). No statements regarding significance or environmental consequences are provided. This year’s report is the eighteen revision of the original document published in 1988 and is (until replaced by the nineteenth revision) the only version that is relevant for use in the preparation of Hanford NEPA, State Environmental Policy Act (SEPA), and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA)more » documents. Two chapters are included in this document (Chapters 4 and 6), numbered to correspond to chapters typically presented in environmental impact statements (EISs) and other Hanford Site NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology; air quality; geology; hydrology; ecology; cultural, archaeological, and historical resources; socioeconomics; noise; and occupational health and safety. Sources for extensive tabular data related to these topics are provided in the chapter. When possible, subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, for the 100, 200, 300 and other areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) describes federal and state laws and regulations, DOE directives and permits, and presidential executive orders that are applicable to NEPA documents prepared for Hanford Site activities. Information in Chapter 6 can be adapted and supplemented with specific information covering statutory and regulatory requirements for use in an environmental assessment or environmental impact statement. When preparing environmental assessments and EISs, authors should consult Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements published by the DOE Office of NEPA Oversight (DOE 2004). Additional direction and guidance on the preparation of DOE NEPA documents can be found at http://tis.eh.doe.gov/nepa/guidance.html. Individuals seeking baseline data on the Hanford Site and its past activities may also use the information contained in this document to evaluate projected activities and their impacts. Pacific Northwest National Laboratory (PNNL) staff prepared individual sections of this document, with input from other Hanford Site contractors with the best available information through May 2007. More detailed data are available from reference sources cited or from the authors. For this 2007 revision, the following sections of the document were reviewed by the authors and updated with the best available information through May 2005: Climate and Meteorology Air Quality Geology – Seismicity section only Hydrology – Flow charts for the Columbia and Yakima rivers only Ecology – Threatened and Endangered Species subsection only Socioeconomics Occupational Safety All of Chapter 6.« less
Endometrial lesions caused by catheters used for embryo transfers: a preliminary report.
Marconi, Guillermo; Vilela, Martín; Belló, José; Diradourián, Marco; Quintana, Ramiro; Sueldo, Carlos
2003-08-01
To visualize by microhysteroscopy any possible lesions on the endocervix and endometrium made by the catheters commonly used for embryo transfer (ET). Prospective descriptive study. Tertiary fertility center (IFER). Twenty-three infertile patients underwent a mock transfer before a microhysteroscopy during the postovulatory phase (days 2-5 after ovulation) of the cycle with a Tomcat catheter (n = 5), Frydman's catheter (n = 5), Frydman's set (n = 3), or Wallace's catheter (n = 10). Mock ETs and subsequent mycrohysteroscopies.Visualization, description, and documentation of endocervical and endometrial lesions. The lesions in all 23 patients were described and documented (tunnel-like, groove-like, punch-out, crater-like). The Wallace catheter appears to be less traumatic to the endometrium (but it seems that it is important to take care to not pass the internal os with the outer sheath). The Tomcat catheter and the Frydman's set caused the more significant lesions that were observed. In this preliminary study, for the first time endometrial lesions caused by the ET catheters were directly visualized and documented. Some of these observed lesions appear to be capable of compromising the success of ET.
Laboratory evaluation of detectors of explosives' effluents
DOT National Transportation Integrated Search
1972-11-30
This document contains the classification, technical description and laboratory evaluation of five commercial detectors for explosives' effluents. It includes an outline of operating principles, test and evaluation procedures. The evaluation is based...
76 FR 52730 - Reporting and Recordkeeping Requirements Under OMB Review
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-23
...: Title: ``Personal Financial Statement''. Frequency: On Occasion. SBA Form Number: 413. Description of.... Copies: Request for clearance (OMB 83-1), supporting statement, and other documents submitted to OMB for...
System description and requirements document.
DOT National Transportation Integrated Search
2007-10-10
The Next Generation 911 Initiative (NG911) : is a U.S. Department of Transportation (USDOT) : research and development project that will help : define the system architecture and develop a : transition plan that considers responsibilities...
CVISN system design description
DOT National Transportation Integrated Search
1999-05-01
This document focuses on the Commercial Vehicle Information Systems and Networks (CVISN) System Design and Architecture. It begins with a discussion on the relationships between the National ITS Architecture the CVISN Architecture, and the Internatio...
Watershed Academy Webcast: USDA's National Water Quality Initiative
This page contains a description and documentation associated with the webcast on how USDA’s NWQI is working in priority watersheds to help farmers, ranchers and forest landowners improve water quality.
7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.
Code of Federal Regulations, 2013 CFR
2013-01-01
... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...
7 CFR 4280.116 - Application and documentation.
Code of Federal Regulations, 2012 CFR
2012-01-01
... project goals that includes the following: (i) Title. Provide a descriptive title of the project... sufficient detail to allow the Agency to score the project and evaluate its technical feasibility. (B) Either...
7 CFR 4280.116 - Application and documentation.
Code of Federal Regulations, 2014 CFR
2014-01-01
... project goals that includes the following: (i) Title. Provide a descriptive title of the project... sufficient detail to allow the Agency to score the project and evaluate its technical feasibility. (B) Either...
7 CFR 4280.116 - Application and documentation.
Code of Federal Regulations, 2013 CFR
2013-01-01
... project goals that includes the following: (i) Title. Provide a descriptive title of the project... sufficient detail to allow the Agency to score the project and evaluate its technical feasibility. (B) Either...
7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.
Code of Federal Regulations, 2012 CFR
2012-01-01
... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...
7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.
Code of Federal Regulations, 2010 CFR
2010-01-01
... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...
7 CFR 4280.111 - Application and documentation.
Code of Federal Regulations, 2010 CFR
2010-01-01
...: (i) Title. Provide a descriptive title of the project (identified on SF 424). (ii) Applicant... sufficient detail to allow the Agency to score the project and evaluate its technical feasibility. (B) Either...
7 CFR 4280.111 - Application and documentation.
Code of Federal Regulations, 2011 CFR
2011-01-01
...: (i) Title. Provide a descriptive title of the project (identified on SF 424). (ii) Applicant... sufficient detail to allow the Agency to score the project and evaluate its technical feasibility. (B) Either...
7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.
Code of Federal Regulations, 2011 CFR
2011-01-01
... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...
7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.
Code of Federal Regulations, 2014 CFR
2014-01-01
... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...
75 FR 47629 - Agency Information Collection Activities; Proposals, Submissions, and Approvals
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-06
... supporting documentation; including, among other things, a description of the likely respondents, proposed... appropriate, OWCP must receive certain data elements, including the signature of the physician for medical...
Web page provides narrative of What's New?, Site Description, Site Risk, Cleanup Progress, Community Involvement, Next Steps, Site Documents, FAQ, Contacts and LInks for the Upper Animas Mining District site in San Juan County, Colorado.
Idaho traffic collisions, 2000
DOT National Transportation Integrated Search
2000-01-01
Idaho Traffic Collisions 2000 provides an annual description of collision characteristics for Idaho. This : document is used by state and local transportation, law enforcement, health, and other agencies charged with : the responsibility of coping wi...
Idaho traffic collisions, 2005
DOT National Transportation Integrated Search
2005-01-01
Idaho Traffic Collisions 2005 provides an annual description of motor vehicle collision characteristics for Idaho. This document is used by state and local transportation, law enforcement, health, and other agencies charged with the responsibility of...
77 FR 20024 - Proposed Information Collection Activity; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-03
.... The descriptive study of these programs that serve tribal communities will document the way in which... feedback survey on the usefulness of periodically held cross-grantee learning events. Respondents: Program...
77 FR 33222 - Submission for OMB Review; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-05
.... The descriptive study of these programs that serve tribal communities will document the way in which... feedback survey on the usefulness of periodically held cross-grantee learning events. Respondents: Program...
IDC Reengineering Phase 2 Project Scope.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harris, James M.
This report provides a brief description of the scope of the IDC Reengineering Phase 2 project. It describes the goals and objectives of reengineering, the system definition, and the technical scope of the system. REVISIONS Version Date Author/Team Revision Description Authorized by 1.0 9/25/2014 SNL IDC Reengineering Team Unlimited Release for I2 M. Harris 1.1 28/01/2015 IDC Reengineering Team Align with previous IDC scope document E. Tomuta.
ERIC Educational Resources Information Center
Zeigler, Sherilyn K., Ed.
This document contains all of the presentations given at the 1974 National American Academy of Advertising Conference in Newport, Rhode Island. The theme of the conference was "Perspectives on Advertising" and the areas of focus were curricula and instruction, descriptive and experimental research, cooperation between educators and the advertising…
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. NRC documents that are publicly available may be examined without charge atmore » the NRC Public Document Room (PDR).« less
DOT National Transportation Integrated Search
1999-10-01
This "Guide to the Transport Acquis" is an informal document which provides an overview of current EU transport legislation. Following a description of each transport sector, relevant legal instruments are presented along with subsequent amendments o...
49 CFR 236.1035 - Field testing requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... uncertified PTC system, or a product of an uncertified PTC system, or any regression testing of a certified...: (1) A complete description of the PTC system; (2) An operational concepts document; (3) A complete...
DOT National Transportation Integrated Search
2007-01-01
Idaho Traffic Crashes 2007 provides an annual description of motor vehicle crash characteristics for : crashes that have occurred within the State of Idaho. This document is used by state and local : transportation, law enforcement, health, and other...
Constructed Wetlands for Wastewater Treatment and Wildlife Habitat: 17 Case Studies
This document provides brief descriptions of 17 wetland treatment systems from across the country that are providing significant water quality benefits while demonstrating additional benefits such as wildlife habitat.
42 CFR 1007.15 - Applications, certification and recertification.
Code of Federal Regulations, 2010 CFR
2010-10-01
..., or other document sets forth the formal procedures required under § 1007.7(b), or the formal working..., and experience of all senior professional staff already employed and job descriptions, with minimum...
Frequently Asked Questions about Music Therapy
... of clients, develop and implement treatment plans, and evaluate and document clinical changes. Once the music therapy ... of the profession is published. This includes a descriptive statistical profile of the profession. Music therapists' salaries ...
75 FR 45157 - Submission for OMB Review: Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-02
..., with applicable supporting documentation; including, among other things, a description of the likely... the training, the date(s) of the training, and the signature of the competent person who conducted the...
Using Percussion to Teach English Pronunciation
ERIC Educational Resources Information Center
English Teaching Forum, 2017
2017-01-01
This document presents a step-by-step description of an activity that demonstrates how learners at all levels and all ages can use percussion and percussion instruments to support their learning of English pronunciation.
Soil/sediment characterization for 216-A-29 ditch
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mitchell, R.M.
1997-03-01
This document provides a detailed description of the environmental samples collected from the 216-A-29 Ditch in 1988. Tables summarizing the laboratory data for radionuclides, metals, and soil chemistry are included.
Idaho traffic collisions, 2001
DOT National Transportation Integrated Search
2001-01-01
Idaho Traffic Collisions 2001 provides an annual description of collision characteristics for Idaho. This document is used by state and local transportation, law enforcement, health, and other agencies charged with the responsibility of coping with t...
75 FR 10239 - Combined Notice of Filings
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-05
... filings: Docket Numbers: RP10-394-000 Applicants: Quest Pipelines (KPC) Description: Quest Pipelines (KPC... link on the web site that enables subscribers to receive e-mail notification when a document is added...
2010 Cost of Wind Energy Review
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tegen, S.; Hand, M.; Maples, B.
2012-04-01
This document provides a detailed description of NREL's levelized cost of wind energy equation, assumptions and results in 2010, including historical cost trends and future projections for land-based and offshore utility-scale wind.
2010 Cost of Wind Energy Review
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tegen, S.; Hand, M.; Maples, B.
2012-04-01
This document provides a detailed description of NREL's levelized cost of wind energy equation, assumptions, and results in 2010, including historical cost trends and future projections for land-based and offshore utility-scale wind.
Balanced program plan. Volume IV. Coal conversion
DOE Office of Scientific and Technical Information (OSTI.GOV)
Richmond, C. R.; Reichle, D. E.; Gehrs, C. W.
1976-05-01
This document contains a description of the biomedical and environmental research necessary to ensure the timely attainment of coal conversion technologies amenable to man and his environment. The document is divided into three sections. The first deals with the types of processes currently being considered for development; the data currently available on composition of product, process and product streams, and their potential effects; and problems that might arise from transportation and use of products. Section II is concerned with a description of the necessary research in each of the King-Muir categories, while the third section presents the research strategies necessarymore » to assess the potential problems at the conversion plant (site specific) and those problems that might effect the general public and environment as a result of the operation of large-scale coal conversion plants. (auth)« less
Balanced program plan. Volume 4. Coal conversion
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1976-05-01
This document contains a description of the biomedical and environmental research necessary to ensure the timely attainment of coal conversion technologies amenable to man and his environment. The document is divided into three sections. The first deals with the types of processes currently being considered for development; the data currently available on composition of product, process and product streams, and their potential effects; and problems that might arise from transportation and use of products. Section II is concerned with a description of the necessary research in each of the King-Muir categories, while the third section presents the research strategies necessarymore » to assess the potential problems at the conversion plant (site specific) and those problems that might effect the general public and environment as a result of the operation of large-scale coal conversion plants.« less
Description of a Website Resource for Turbulence Modeling Verification and Validation
NASA Technical Reports Server (NTRS)
Rumsey, Christopher L.; Smith, Brian R.; Huang, George P.
2010-01-01
The activities of the Turbulence Model Benchmarking Working Group - which is a subcommittee of the American Institute of Aeronautics and Astronautics (AIAA) Fluid Dynamics Technical Committee - are described. The group s main purpose is to establish a web-based repository for Reynolds-averaged Navier-Stokes turbulence model documentation, including verification and validation cases. This turbulence modeling resource has been established based on feedback from a survey on what is needed to achieve consistency and repeatability in turbulence model implementation and usage, and to document and disseminate information on new turbulence models or improvements to existing models. The various components of the website are described in detail: description of turbulence models, turbulence model readiness rating system, verification cases, validation cases, validation databases, and turbulence manufactured solutions. An outline of future plans of the working group is also provided.
NASA standard: Trend analysis techniques
NASA Technical Reports Server (NTRS)
1990-01-01
Descriptive and analytical techniques for NASA trend analysis applications are presented in this standard. Trend analysis is applicable in all organizational elements of NASA connected with, or supporting, developmental/operational programs. This document should be consulted for any data analysis activity requiring the identification or interpretation of trends. Trend analysis is neither a precise term nor a circumscribed methodology: it generally connotes quantitative analysis of time-series data. For NASA activities, the appropriate and applicable techniques include descriptive and graphical statistics, and the fitting or modeling of data by linear, quadratic, and exponential models. Usually, but not always, the data is time-series in nature. Concepts such as autocorrelation and techniques such as Box-Jenkins time-series analysis would only rarely apply and are not included in this document. The basic ideas needed for qualitative and quantitative assessment of trends along with relevant examples are presented.
Semantic Theme Analysis of Pilot Incident Reports
NASA Technical Reports Server (NTRS)
Thirumalainambi, Rajkumar
2009-01-01
Pilots report accidents or incidents during take-off, on flight and landing to airline authorities and Federal aviation authority as well. The description of pilot reports for an incident contains technical terms related to Flight instruments and operations. Normal text mining approaches collect keywords from text documents and relate them among documents that are stored in database. Present approach will extract specific theme analysis of incident reports and semantically relate hierarchy of terms assigning weights of themes. Once the theme extraction has been performed for a given document, a unique key can be assigned to that document to cross linking the documents. Semantic linking will be used to categorize the documents based on specific rules that can help an end-user to analyze certain types of accidents. This presentation outlines the architecture of text mining for pilot incident reports for autonomous categorization of pilot incident reports using semantic theme analysis.
MCM generator: a Java-based tool for generating medical metadata.
Munoz, F; Hersh, W
1998-01-01
In a previous paper we introduced the need to implement a mechanism to facilitate the discovery of relevant Web medical documents. We maintained that the use of META tags, specifically ones that define the medical subject and resource type of a document, help towards this goal. We have now developed a tool to facilitate the generation of these tags for the authors of medical documents. Written entirely in Java, this tool makes use of the SAPHIRE server, and helps the author identify the Medical Subject Heading terms that most appropriately describe the subject of the document. Furthermore, it allows the author to generate metadata tags for the 15 elements that the Dublin Core considers as core elements in the description of a document. This paper describes the use of this tool in the cataloguing of Web and non-Web medical documents, such as images, movie, and sound files.
Wilson, John D.; Naff, Richard L.
2004-01-01
A geometric multigrid solver (GMG), based in the preconditioned conjugate gradient algorithm, has been developed for solving systems of equations resulting from applying the cell-centered finite difference algorithm to flow in porous media. This solver has been adapted to the U.S. Geological Survey ground-water flow model MODFLOW-2000. The documentation herein is a description of the solver and the adaptation to MODFLOW-2000.
ERIC Educational Resources Information Center
Keaton, Patrick
2014-01-01
This documentation is for the provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Local Education Agency (LEA) Universe Survey for SY 2011-12. It contains a brief description of the data collection, along with information required to understand and access the data file. The CCD is a…
ERIC Educational Resources Information Center
Keaton, Patrick
2013-01-01
The documentation for this provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Public Elementary/Secondary School Universe Survey for SY 2011-12, contains a brief description of the data collection, along with information required to understand and access the data file. The SY 2011-12…
NASA Technical Reports Server (NTRS)
Jester, Peggy L.; Hancock, David W., III
1999-01-01
This document provides the Data Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Facility (ISF) Software. This Plan addresses the identification, authority, and description of the interface nodes associated with the GLAS Standard Data Products and the GLAS Ancillary Data.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Neudecker, Denise
2014-07-10
This document provides the numerical values of the evaluated prompt fission neutron spectrum for 239Pu induced by neutrons of 500 keV as well as relative uncertainties and correlations. This document also contains a short description how these data were obtained and shows plots comparing the evaluated results to experimental information as well as the corresponding ENDF/B-VII.1 evaluation.
Software Management Environment (SME) concepts and architecture, revision 1
NASA Technical Reports Server (NTRS)
Hendrick, Robert; Kistler, David; Valett, Jon
1992-01-01
This document presents the concepts and architecture of the Software Management Environment (SME), developed for the Software Engineering Branch of the Flight Dynamic Division (FDD) of GSFC. The SME provides an integrated set of experience-based management tools that can assist software development managers in managing and planning flight dynamics software development projects. This document provides a high-level description of the types of information required to implement such an automated management tool.
ERIC Educational Resources Information Center
Forbes, Pamela C.
2011-01-01
Problem. The Southern Union started the Adventist EDGE initiative as an action plan in response to the North American Division's document, "Journey to Excellence." The Adventist EDGE became a comprehensive educational reform initiative. However, there were different ideas on how the innovation should look when in action in the schools, and these…
DDN (Defense Data Network) Protocol Implementations and Vendors Guide
1987-08-01
length. Lower rates can be selected or determined by attached modem types 303, 209, V.35, or 188-114. Units are in pairs, one at each end of the...ECUs communicate with the IMP via direct cable or modems . DOCUMENTATION: Fully documented vendor product; descriptive literature available...terminals, PCs and modems to an Ethernet. The device can support up to 80 lines and 2 parallel printers. Full domain naming is supported as well as
Centrality based Document Ranking
2014-11-01
clinical domain and very uncommon elsewhere. A regular IR system may fail to rank documents from such a domain, dealing with symptoms, diagnosis and...description). We prepared a hand-crafted list of synonyms for each of the query types, viz. diagnosis , test and treatment. This list was used to expand the...Miller. Semantic search. In INTERNATIONAL WORLD WIDE WEB CONFERENCE, pages 700–709. ACM, 2003. 8. A. Hanbury and M. Lupu . Toward a Model of Domain
Encyclopedia: Satellites and Sounding Rockets, August 1959 - December 1969
NASA Technical Reports Server (NTRS)
1970-01-01
Major space missions utilizing satellites or sounding rockets managed by the NASA Goddard Space Flight Center between August 1959 and December 1969 were documented. The information was presented in the following form: (1) description of each satellite project where Goddard was responsible for the spacecraft or the successful launch or both, with data such as launch characteristics, objectives, etc.; (2) description of each Goddard sounding rocket project, with the following data: sounding rocket type, vehicle number, experimental affiliation, and type of experiment; (3) brief description of current sounding rockets and launch vehicles; (4) table of tracking and data acquisition stations. Summary tables are also provided.
Electronic health record systems in ophthalmology: impact on clinical documentation.
Sanders, David S; Lattin, Daniel J; Read-Brown, Sarah; Tu, Daniel C; Wilson, David J; Hwang, Thomas S; Morrison, John C; Yackel, Thomas R; Chiang, Michael F
2013-09-01
To evaluate quantitative and qualitative differences in documentation of the ophthalmic examination between paper and electronic health record (EHR) systems. Comparative case series. One hundred fifty consecutive pairs of matched paper and EHR notes, documented by 3 attending ophthalmologist providers. An academic ophthalmology department implemented an EHR system in 2006. Database queries were performed to identify cases in which the same problems were documented by the same provider on different dates, using paper versus EHR methods. This was done for 50 consecutive pairs of examinations in 3 different diseases: age-related macular degeneration (AMD), glaucoma, and pigmented choroidal lesions (PCLs). Quantitative measures were used to compare completeness of documenting the complete ophthalmologic examination, as well as disease-specific critical findings using paper versus an EHR system. Qualitative differences in paper versus EHR documentation were illustrated by selecting representative paired examples. (1) Documentation score, defined as the number of examination elements recorded for the slit-lamp examination, fundus examination, and complete ophthalmologic examination and for critical clinical findings for each disease. (2) Paired comparison of qualitative differences in paper versus EHR documentation. For all 3 diseases (AMD, glaucoma, PCL), the number of complete examination findings recorded was significantly lower with paper than the EHR system (P ≤ 0.004). Among the 3 individual examination sections (general, slit lamp, fundus) for the 3 diseases, 5 of the 9 possible combinations had significantly lower mean documentation scores with paper than EHR notes. For 2 of the 3 diseases, the number of critical clinical findings recorded was significantly lower using paper versus EHR notes (P ≤ 0.022). All (150/150) paper notes relied on graphical representations using annotated hand-drawn sketches, whereas no (0/150) EHR notes contained drawings. Instead, the EHR systems documented clinical findings using textual descriptions and interpretations. There were quantitative and qualitative differences in the nature of paper versus EHR documentation of ophthalmic findings in this study. The EHR notes included more complete documentation of examination elements using structured textual descriptions and interpretations, whereas paper notes used graphical representations of findings. The author(s) have no proprietary or commercial interest in any materials discussed in this article. Copyright © 2013 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.
A Lunar Optical-Ultraviolet-Infrared Synthesis Array (LOUISA)
NASA Technical Reports Server (NTRS)
Burns, Jack O. (Editor); Johnson, Stewart W. (Editor); Duric, Nebojsa (Editor)
1992-01-01
This document contains papers presented at a workshop held to consider 'optical ultraviolet infrared' interferometric observations from the moon. Part 1 is an introduction. Part 2 is a description of current and planned ground-based interferometers. Part 3 is a description of potential space-based interferometers. Part 4 addresses the potential for interferometry on the moon. Part 5 is the report of the workshop's working groups. Concluding remarks, summary, and conclusions are presented in Part 6.
Gemini Program Mission Planning Report
NASA Technical Reports Server (NTRS)
1965-01-01
This report defines the Gemini Program objectives and presents guidelines for the individual Gemini missions. It provides general space vehicle configuration data, and descriptions of planned missions. Contingency mission requirements and extravehicular operations to be performed during specific missions are described in the last two sections of the basic document. Data on spacecraft weights and Gemini Launch Vehicle performance capabilities are provided in Appendix A, while Appendix B provides descriptions of onboard experiments to be conducted during Gemini missions.
Potential for driver attention monitoring system development
DOT National Transportation Integrated Search
1984-02-08
The following document provides an overview of the potential value of research : into driver attentional processes. Section 1 outlines the status of this research : into driver attentional processes and provides capsule descriptions of the : physical...
Eastern Washington Intermodal Transportation Study Scope of Work
DOT National Transportation Integrated Search
1993-02-04
This document presents a detailed Scope of Work to guide implementation of : the Eastern Washington Intermodal Transportation Study. Included is a : description of project management and staff responsibilities, a detailed work : plan and timetable fo...
75 FR 4136 - Pipeline Safety: Requests for Special Permit
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-26
... technical analysis or other supporting documentation provided by the requestor, including a description of...: Kay McIver by telephone at (202) 366-0113; or, e-mail at [email protected] . Technical: Steve Nanney...
DOT National Transportation Integrated Search
2009-01-01
Idaho Traffic Crashes 2009 provides an annual description of motor vehicle crash characteristics for : crashes that have occurred on public roads within the State of Idaho. This document is used by state and : local transportation, law enforcement, h...
DOT National Transportation Integrated Search
2008-01-01
Idaho Traffic Crashes 2008 provides an annual description of motor vehicle crash characteristics for : crashes that have occurred on public roads within the State of Idaho. This document is used by state and : local transportation, law enforcement, h...
Railroad Classification Yard Technology Manual: Volume II : Yard Computer Systems
DOT National Transportation Integrated Search
1981-08-01
This volume (Volume II) of the Railroad Classification Yard Technology Manual documents the railroad classification yard computer systems methodology. The subjects covered are: functional description of process control and inventory computer systems,...
27 CFR 18.24 - Data for application.
Code of Federal Regulations, 2010 CFR
2010-04-01
..., supported by the organizational documents listed in § 18.25; and (e) Description of each still and a... applicant and made a part of the application. (Approved by the Office of Management and Budget under control...
Watershed Academy Webcast: Understanding Nutrient Issues Affecting Ohio’s Inland Lakes
This page contains a description and documentation associated with the webcast on how USDA’s NWQI is working in priority watersheds to help farmers, ranchers and forest landowners improve water quality.
Educational Technology in Argentina.
ERIC Educational Resources Information Center
Ronchi, Robert
1980-01-01
This description of the status of educational technology and trends in the development of the field in Argentina is based on article documents, reports, and a survey of projects operating in that country. Sixteen references are listed. (Author/CHC)
ITS Projects In The Northeast Corridor
DOT National Transportation Integrated Search
1996-01-01
THIS DOCUMENT CONTAINS BRIEF DESCRIPTIONS OF ITS PROJECTS RECENTLY COMPLETED, UNDERWAY OR PLANNED WITHIN THE NORTHEAST CORRIDOR. THE BASIC SOURCE OF THIS INFORMATION IS FROM THE SPONSORING AGENCIES ALTHOUGH OTHER SECONDARY SOURCES HAVE ALSO BEEN USED...
Eco-logical successes : January 2011
DOT National Transportation Integrated Search
2011-01-01
This document identifies and explains each Eco-Logical signatory agency's strategic environmental programs, projects, and efforts that are either directly related to or share the vision set forth in Eco-Logical. A brief description of an agency's key...
A new method for digital video documentation in surgical procedures and minimally invasive surgery.
Wurnig, P N; Hollaus, P H; Wurnig, C H; Wolf, R K; Ohtsuka, T; Pridun, N S
2003-02-01
Documentation of surgical procedures is limited to the accuracy of description, which depends on the vocabulary and the descriptive prowess of the surgeon. Even analog video recording could not solve the problem of documentation satisfactorily due to the abundance of recorded material. By capturing the video digitally, most problems are solved in the circumstances described in this article. We developed a cheap and useful digital video capturing system that consists of conventional computer components. Video images and clips can be captured intraoperatively and are immediately available. The system is a commercial personal computer specially configured for digital video capturing and is connected by wire to the video tower. Filming was done with a conventional endoscopic video camera. A total of 65 open and endoscopic procedures were documented in an orthopedic and a thoracic surgery unit. The median number of clips per surgical procedure was 6 (range, 1-17), and the median storage volume was 49 MB (range, 3-360 MB) in compressed form. The median duration of a video clip was 4 min 25 s (range, 45 s to 21 min). Median time for editing a video clip was 12 min for an advanced user (including cutting, title for the movie, and compression). The quality of the clips renders them suitable for presentations. This digital video documentation system allows easy capturing of intraoperative video sequences in high quality. All possibilities of documentation can be performed. With the use of an endoscopic video camera, no compromises with respect to sterility and surgical elbowroom are necessary. The cost is much lower than commercially available systems, and setting changes can be performed easily without trained specialists.
Implementation of standardized nomenclature in the electronic medical record.
Klehr, Joan; Hafner, Jennifer; Spelz, Leah Mylrea; Steen, Sara; Weaver, Kathy
2009-01-01
To describe a customized electronic medical record documentation system which provides an electronic health record, Epic, which was implemented in December 2006 using standardized taxonomies for nursing documentation. Descriptive data is provided regarding the development, implementation, and evaluation processes for the electronic medical record system. Nurses used standardized nursing nomenclature including NANDA-I diagnoses, Nursing Interventions Classification, and Nursing Outcomes Classification in a measurable and user-friendly format using the care plan activity. Key factors in the success of the project included close collaboration among staff nurses and information technology staff, ongoing support and encouragement from the vice president/chief nursing officer, the ready availability of expert resources, and nursing ownership of the project. Use of this evidence-based documentation enhanced institutional leadership in clinical documentation.
Hypersonic Vehicle Propulsion System Simplified Model Development
NASA Technical Reports Server (NTRS)
Stueber, Thomas J.; Raitano, Paul; Le, Dzu K.; Ouzts, Peter
2007-01-01
This document addresses the modeling task plan for the hypersonic GN&C GRC team members. The overall propulsion system modeling task plan is a multi-step process and the task plan identified in this document addresses the first steps (short term modeling goals). The procedures and tools produced from this effort will be useful for creating simplified dynamic models applicable to a hypersonic vehicle propulsion system. The document continues with the GRC short term modeling goal. Next, a general description of the desired simplified model is presented along with simulations that are available to varying degrees. The simulations may be available in electronic form (FORTRAN, CFD, MatLab,...) or in paper form in published documents. Finally, roadmaps outlining possible avenues towards realizing simplified model are presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Appel, Gordon John
Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.
Shuttle unified navigation filter, revision 1
NASA Technical Reports Server (NTRS)
Muller, E. S., Jr.
1973-01-01
Equations designed to meet the navigation requirements of the separate shuttle mission phases are presented in a series of reports entitled, Space Shuttle GN and C Equation Document. The development of these equations is based on performance studies carried out for each particular mission phase. Although navigation equations have been documented separately for each mission phase, a single unified navigation filter design is embodied in these separate designs. The purpose of this document is to present the shuttle navigation equations in a form in which they would most likely be coded-as the single unified navigation filter used in each mission phase. This document will then serve as a single general reference for the navigation equations replacing each of the individual mission phase navigation documents (which may still be used as a description of a particular navigation phase).
Using bio.tools to generate and annotate workbench tool descriptions
Hillion, Kenzo-Hugo; Kuzmin, Ivan; Khodak, Anton; Rasche, Eric; Crusoe, Michael; Peterson, Hedi; Ison, Jon; Ménager, Hervé
2017-01-01
Workbench and workflow systems such as Galaxy, Taverna, Chipster, or Common Workflow Language (CWL)-based frameworks, facilitate the access to bioinformatics tools in a user-friendly, scalable and reproducible way. Still, the integration of tools in such environments remains a cumbersome, time consuming and error-prone process. A major consequence is the incomplete or outdated description of tools that are often missing important information, including parameters and metadata such as publication or links to documentation. ToolDog (Tool DescriptiOn Generator) facilitates the integration of tools - which have been registered in the ELIXIR tools registry (https://bio.tools) - into workbench environments by generating tool description templates. ToolDog includes two modules. The first module analyses the source code of the bioinformatics software with language-specific plugins, and generates a skeleton for a Galaxy XML or CWL tool description. The second module is dedicated to the enrichment of the generated tool description, using metadata provided by bio.tools. This last module can also be used on its own to complete or correct existing tool descriptions with missing metadata. PMID:29333231
Ground Software Maintenance Facility (GSMF) user's manual
NASA Technical Reports Server (NTRS)
Aquila, V.; Derrig, D.; Griffith, G.
1986-01-01
Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.
Computer software configuration description, 241-AY and 241 AZ tank farm MICON automation system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Winkelman, W.D.
This document describes the configuration process, choices and conventions used during the Micon DCS configuration activities, and issues involved in making changes to the configuration. Includes the master listings of the Tag definitions, which should be revised to authorize any changes. Revision 3 provides additional information on the software used to provide communications with the W-320 project and incorporates minor changes to ensure the document alarm setpoint priorities correctly match operational expectations.
NASA Technical Reports Server (NTRS)
Isenberg, J. M.; Southall, J. W.
1979-01-01
The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.
The Advanced Noise Control Fan Baseline Measurements
NASA Technical Reports Server (NTRS)
McAllister, Joseph; Loew, Raymond A.; Lauer, Joel T.; Stuliff, Daniel L.
2009-01-01
The NASA Glenn Research Center s (NASA Glenn) Advanced Noise Control Fan (ANCF) was developed in the early 1990s to provide a convenient test bed to measure and understand fan-generated acoustics, duct propagation, and radiation to the farfield. As part of a complete upgrade, current baseline and acoustic measurements were documented. Extensive in-duct, farfield acoustic, and flow field measurements are reported. This is a follow-on paper to documenting the operating description of the ANCF.
ERIC Educational Resources Information Center
Cornman, Stephen Q.; Zhou, Lei; Nakamoto, Nanae
2012-01-01
This documentation is for the revised file (Version 1b) of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) National Public Education Financial Survey (NPEFS) for school year 2008-2009, fiscal year 2009 (FY 09). It contains a brief description of the data collection along with information required to understand and…
DDN (Defense Data Network) Protocol Implementations and Vendors Guide,
1986-08-01
3000 feet) in length. Lower rates can be selected or determined by attached modem types 303, 209, V.35, or 188-114. Units are in pairs, one at each...each direction. ECUs communicate with the IMP via direct cable or modems . DOCUMENTATION: Fully documented vendor product; descriptive literature...application is the attachment of terminals, PCs and modems to an Ethernet. The device can support up to 80 lines and 2 parallel printers. Full domain naming
NASA Technical Reports Server (NTRS)
Topol, David A.
1999-01-01
TFaNS is the Tone Fan Noise Design/Prediction System developed by Pratt & Whitney under contract to NASA Lewis (presently NASA Glenn). The purpose of this system is to predict tone noise emanating from a fan stage including the effects of reflection and transmission by the rotor and stator and by the duct inlet and nozzle. These effects have been added to an existing annular duct/isolated stator noise prediction capability. TFaNS consists of: The codes that compute the acoustic properties (reflection and transmission coefficients) of the various elements and write them to files. Cup3D: Fan Noise Coupling Code that reads these files, solves the coupling problem, and outputs the desired noise predictions. AWAKEN: CFD/Measured Wake Postprocessor which reformats CFD wake predictions and/or measured wake data so it can be used by the system. This volume of the report provides technical background for TFaNS including the organization of the system and CUP3D technical documentation. This document also provides information for code developers who must write Acoustic Property Files in the CUP3D format. This report is divided into three volumes: Volume I: System Description, CUP3D Technical Documentation, and Manual for Code Developers; Volume II: User's Manual, TFaNS Vers. 1.4; Volume III: Evaluation of System Codes.
Report on dynamic speed harmonization and queue warning algorithm design.
DOT National Transportation Integrated Search
2014-02-01
This report provides a detailed description of the algorithms that will be used to generate harmonized recommended speeds and queue warning information in the proposed Intelligent Network Flow Optimization (INFLO) prototype. This document describes t...
Adaptive Recreational Equipment.
ERIC Educational Resources Information Center
Schilling, Mary Lou, Ed.
1983-01-01
Designed for teachers interested in therapeutic recreation, the document lists sources of adaptive recreational equipment and their homemade counterparts. Brief descriptions for ordering or constructing recreational equipment for the visually impaired, poorly coordinated, physically impaired, and mentally retarded are given. Specific adaptations…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-07
... Project: Monroe Cold Spring Hydroelectric Project. f. Location: The proposed Monroe Cold Spring... document on that resource agency. l. Description of the project: The proposed Monroe Cold Spring...
South Dakota ITS/CVO business plan : final business plan
DOT National Transportation Integrated Search
1998-01-18
This report defines an Intelligent Transportation Systems/Commercial Vehicle Operations (ITS/CVO) program for the State of South Dakota. Structured as a business plan, the document includes the following components: 1) description of the current CVO ...
Tracing And Control Of Engineering Requirements
NASA Technical Reports Server (NTRS)
Turner, Philip R.; Stoller, Richard L.; Neville, Ted; Boyle, Karen A.
1991-01-01
TRACER (Tracing and Control of Engineering Requirements) is data-base/word-processing software system created to document and maintain order of both requirements and descriptions associated with engineering project. Implemented on IBM PC under PC-DOS. Written with CLIPPER.
This document serves as an outline for the structure of the Agency’s Open Government Plan 3.0, expected to be published later this summer, along with a description of a candidate being consider as a flagship project.
Job Briefs. Career Education Guide.
ERIC Educational Resources Information Center
Dependents Schools (DOD), Washington, DC. European Area.
The document contains 288 one-page job descriptions based on 1973 information for the following 11 career clusters: automotive technology, business/clerical/sales, computer technology, electricity/electronics, graphic communications, health/cosmetology, agriculture/conservation, artistic/literary/music, mechanical/transportation/construction,…
NASA Technical Reports Server (NTRS)
Day, Arthur C.; Griess, Kenneth H.
2013-01-01
This document provides standalone information for the Lightning Strike Protection (LSP) Composite Substrate Test Bed Design. A six-sheet drawing set is reproduced for reference, as is some additional descriptive information on suitable sensors and use of the test bed.
75 FR 9635 - Notice of Informational Filing
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-03
... description of the TrackAccess product and an operational concepts document, pursuant to 49 CFR 236.913(j)(1... Register published on April 11, 2000 (Volume 65, number 70; Pages 19477-78). Issued in Washington, DC on...
Columbus electronic freight management evaluation final report : June 2008.
DOT National Transportation Integrated Search
2008-06-01
This document provides the independent evaluation of the USDOT-sponsored Columbus Electronic Freight Management (CEFM) Operational Test, which occurred from late May 2007 until December 2007. The Evaluation report includes descriptions of the CEFM sy...
ITS data archiving : five-year program description
DOT National Transportation Integrated Search
2000-03-01
The purpose of this document is to explain the need for and elements of a Federal program : addressing the archiving and multi-agency use of data generated from Intelligent : Transportation Systems (ITS) applications. The development of this program ...
Freight data architecture business process, logical data model, and physical data model.
DOT National Transportation Integrated Search
2014-09-01
This document summarizes the study teams efforts to establish data-sharing partnerships : and relay the lessons learned. In addition, it provides information on a prototype freight data : architecture and supporting description and specifications ...
Geiger, Linda H.
1983-01-01
The report is an update of U.S. Geological Survey Open-File Report 77-703, which described a retrieval program for administrative index of active data-collection sites in Florida. Extensive changes to the Findex system have been made since 1977 , making the previous report obsolete. A description of the data base and computer programs that are available in the Findex system are documented in this report. This system serves a vital need in the administration of the many and diverse water-data collection activities. District offices with extensive data-collection activities will benefit from the documentation of the system. Largely descriptive, the report tells how a file of computer card images has been established which contains entries for all sites in Florida at which there is currently a water-data collection activity. Entries include information such as identification number, station name, location, type of site, county, frequency of data collection, funding, and other pertinent details. The computer program FINDEX selectively retrieves entries and lists them in a format suitable for publication. The index is updated routinely. (USGS)
Hill, Mary C.
1990-01-01
This report documents PCG2 : a numerical code to be used with the U.S. Geological Survey modular three-dimensional, finite-difference, ground-water flow model . PCG2 uses the preconditioned conjugate-gradient method to solve the equations produced by the model for hydraulic head. Linear or nonlinear flow conditions may be simulated. PCG2 includes two reconditioning options : modified incomplete Cholesky preconditioning, which is efficient on scalar computers; and polynomial preconditioning, which requires less computer storage and, with modifications that depend on the computer used, is most efficient on vector computers . Convergence of the solver is determined using both head-change and residual criteria. Nonlinear problems are solved using Picard iterations. This documentation provides a description of the preconditioned conjugate gradient method and the two preconditioners, detailed instructions for linking PCG2 to the modular model, sample data inputs, a brief description of PCG2, and a FORTRAN listing.
SIRU utilization. Volume 2: Software description and program documentation
NASA Technical Reports Server (NTRS)
Oehrle, J.; Whittredge, R.
1973-01-01
A complete description of the additional analysis, development and evaluation provided for the SIRU system as identified in the requirements for the SIRU utilization program is presented. The SIRU configuration is a modular inertial subsystem with hardware and software features that achieve fault tolerant operational capabilities. The SIRU redundant hardware design is formulated about a six gyro and six accelerometer instrument module package. The modules are mounted in this package so that their measurement input axes form a unique symmetrical pattern that corresponds to the array of perpendiculars to the faces of a regular dodecahedron. This six axes array provides redundant independent sensing and the symmetry enables the formulation of an optimal software redundant data processing structure with self-contained fault detection and isolation (FDI) capabilities. Documentation of the additional software and software modifications required to implement the utilization capabilities includes assembly listings and flow charts
NASA Technical Reports Server (NTRS)
Hinton, David A.
2001-01-01
A ground-based system has been developed to demonstrate the feasibility of automating the process of collecting relevant weather data, predicting wake vortex behavior from a data base of aircraft, prescribing safe wake vortex spacing criteria, estimating system benefit, and comparing predicted and observed wake vortex behavior. This report describes many of the system algorithms, features, limitations, and lessons learned, as well as suggested system improvements. The system has demonstrated concept feasibility and the potential for airport benefit. Significant opportunities exist however for improved system robustness and optimization. A condensed version of the development lab book is provided along with samples of key input and output file types. This report is intended to document the technical development process and system architecture, and to augment archived internal documents that provide detailed descriptions of software and file formats.
GASTRIC DILATATION VOLVULUS IN ADULT MANED WOLVES (CHRYSOCYON BRACHYURUS).
Hinton, Jenna D; Padilla, Luis R; Joyner, Priscilla H; Schnellbacher, Rodney; Walsh, Timothy F; Aitken-Palmer, Copper
2017-06-01
Gastric dilatation volvulus (GDV) was identified in six adult maned wolves ( Chrysocyon brachyurus ) housed at the Smithsonian Conservation Biology Institute in Front Royal, Virginia, and the Dickerson Park Zoo in Springfield, Missouri. Four individuals were found dead in their enclosures, and GDV was diagnosed postmortem based on radiographic and necropsy findings. Two individuals were diagnosed with GDV antemortem, with one wolf surviving following surgical intervention and supportive management. A concurrent splenic torsion was identified in three of six cases. Although GDV has been well documented in domestic dogs and is known to occur in maned wolves, objective, detailed case descriptions have been limited in this species. This report represents the first description of a surviving case of GDV in the maned wolf. Thorough species-specific documentation of any acutely fatal condition, such as GDV, is imperative for proper case recognition and medical management, with profound implications for species recovery efforts.