Supplement to Art for Elementary Schools.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD.

The document provides art activities for the classroom teacher who is not an art specialist. It contains activities which supplement experiences provided by the art teacher as well as activities designed to measure the achievement level of students in concept skills related to art and the principles of design. The supplement is divided into three…

P/CAF Function in Transcriptional Activation by Steroid Hormone Receptors and Mammary Cell Proliferation

DTIC Science & Technology

1999-07-01

author(s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation...material. Where material from documents designated for limited distribution is quoted, permission has been obtained to use the material. Citations of...mammary tissue in the PCAF knock out mice, was actually completed last year. We are beginning the design and cloning of the breast-specific knock out

Monitored Geologic Repository Project Description Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. M. Curry

2001-01-30

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less

GCS programmer's manual

NASA Technical Reports Server (NTRS)

Lowman, Douglas S.; Withers, B. Edward; Shagnea, Anita M.; Dent, Leslie A.; Hayhurst, Kelly J.

1990-01-01

A variety of instructions to be used in the development of implementations of software for the Guidance and Control Software (GCS) project is described. This document fulfills the Radio Technical Commission for Aeronautics RTCA/DO-178A guidelines, 'Software Considerations in Airborne Systems and Equipment Certification' requirements for document No. 4, which specifies the information necessary for understanding and programming the host computer, and document No. 12, which specifies the software design and implementation standards that are applicable to the software development and testing process. Information on the following subjects is contained: activity recording, communication protocol, coding standards, change management, error handling, design standards, problem reporting, module testing logs, documentation formats, accuracy requirements, and programmer responsibilities.

Evidence-Centered Design: Recommendations for Implementation and Practice

ERIC Educational Resources Information Center

Hendrickson, Amy; Ewing, Maureen; Kaliski, Pamela; Huff, Kristen

2013-01-01

Evidence-centered design (ECD) is an orientation towards assessment development. It differs from conventional practice in several ways and consists of multiple activities. Each of these activities results in a set of useful documentation: domain analysis, domain modeling, construction of the assessment framework, and assessment…

Center for Information Services Fourth Quarterly Progress Report, Phase IIB; Detailed Design and Prototype Development, 1 October 1971 to 31 December 1971.

ERIC Educational Resources Information Center

Kehl, W. B.; And Others

The administrative activity, including organization, staff, budget and external contacts, and the technical progress of IPS development, experimental service, workshops, documentation and related activities of the Center for Information Services (at the University of California, Los Angeles) are reported upon in this document. Pages 9 and 10 may…

A Proposed Integration Environment for Enhanced User Interaction and Value-Adding of Electronic Documents: An Empirical Evaluation.

ERIC Educational Resources Information Center

Liew, Chern Li; Chennupati, K. R.; Foo, Schubert

2001-01-01

Explores the potential and impact of an innovative information environment in enhancing user activities in using electronic documents for various tasks, and to support the value-adding of these e-documents. Discusses the conceptual design and prototyping of a proposed environment, PROPIE. Presents an empirical and formative evaluation of the…

RADON REDUCTION TECHNIQUES FOR EXISTING DETACHED HOUSES - TECHNICAL GUIDANCE (THIRD EDITION) FOR ACTIVE SOIL DEPRESSURIZATION SYSTEMS

EPA Science Inventory

This technical guidance document is designed to aid in the selection, design, installation and operation of indoor radon reduction techniques using soil depressurization in existing houses. Its emphasis is on active soil depressurization; i.e., on systems that use a fan to depre...

Africa.

ERIC Educational Resources Information Center

Happel, Sue; Loeb, Joyce

Although the activities in this unit are designed primarily for students in the intermediate grades, the document's text, illustrations, and bibliographic references are suitable for anyone interested in learning about Africa. Following a brief introduction and map work, the document is arranged into six sections. Section 1 traces Africa's history…

NASA Processes and Requirements for Conducting Human-in-the-Loop Closed Chamber Tests

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Montz, Michael E.

2004-01-01

NASA has specific processes and requirements that must be followed for tests involving human subjects to be conducted in a safe and effective manner. There are five distinct phases of test operations. Phase one, the test request phase, consists of those activities related to initiating, processing, reviewing, and evaluating the test request. Phase two, the test preparation phase consists of those activities related to planning, coordinating, documenting, and building up the test. Phase three, the test readiness phase consists of those activities related to verifying and reviewing the planned test operations. Phase four, the test activity phase, consists of all pretest operations, functional checkouts, emergency drills, and test operations. Phase five, the post test activity phase, consists of those activities performed once the test is completed, including briefings, documentation of anomalies, data reduction and archiving, and reporting. Project management processes must be followed for facility modifications and major test buildup, which include six phases: initiation and assessment, requirements evaluation, preliminary design, detailed design, use readiness review (URR) and acceptance. Compliance with requirements for safety and quality assurance are documented throughout the test buildup and test operation processes. Tests involving human subjects must be reviewed by the applicable Institutional Review Board (IRB).

How to Start Intergenerational Programs in Communities.

ERIC Educational Resources Information Center

2002

This document is designed for use by community organizers in creating, developing and maintaining an intergenerational program. Starting with a brief overview of the Maryland Intergenerational Coalition, the document describes (in short, bulleted entries) the activities and accomplishments of various intergenerational programs in Maryland, such as…

Design Manual: Removal of Fluoride from Drinking Water ...

EPA Pesticide Factsheets

This document is an updated version of the Design Manual: Removal of Fluoride from Drinking Water Supplies by Activated Alumina (Rubel, 1984). The manual is an in-depth presentation of the steps required to design and operate a fluoride removal plant using activated alumina (AA), which is a reliable and cost-effective process for treating excess fluoride from drinking water supplies. Design Manual on removing fluoride from drinking water to support the fluoride MCL - manual

Sports Medicine. Instructor's Guide, Student's Manual, Student Learning Activities.

ERIC Educational Resources Information Center

Fair, Helena J.

The instructor's guide, the first of three documents in this package, is for a course designed for students investigating the activities within the sports medicine department or considering any of the areas of kinesiology as a career. The material is designed for individualized study and is competency based with educational outcomes stated for…

76 FR 14443 - High-Speed Intercity Passenger Rail (HSIPR) Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... Environmental Policy Act (NEPA) documentation, final design (FD), and construction. For the purpose of this... designing, engineering, location surveying, mapping, environmental studies, and acquiring rights-of-way..., final design, and construction activities are eligible to receive funding. For applications for Service...

Gearbox Reliability Collaborative Projects | Wind | NREL

Science.gov Websites

partners. This process documented and analyzed the design process and produced a new drivetrain design that Reliability Collaborative) activities. The new design represents the next phase in the DRC project, and will design loads required for wind turbine gearbox design and testing standards. While wind turbine gearboxes

Design and Implementation of Integrated Software Research and Community Service at State Polytechnic of Manado

NASA Astrophysics Data System (ADS)

Saroinsong, T.; A. S Kondoj, M.; Kandiyoh, G.; Pontoh, G.

2018-01-01

The State Polytechnic of Manado (Polimdo) is one of the reliable institutions in North Sulawesi that first implemented ISO 9001. But the accreditation of the institution has not been satisfactory, it means there is still much to be prepared to achieve the expected target. One of the criteria of assessment of institutional accreditation is related to research activities and social work in accordance with the standard seven. Data documentation systems related to research activities and social work are not well integrated and well documented in all existing work units. This causes the process of gathering information related to the activities and the results of research and social work in order to support the accreditation activities of the institution is still not efficient. This study aims to build an integrated software in all work units in Polimdo to obtain documentation and data synchronization in support of activities or reporting of documents accreditation institution in accordance with standard seven specifically in terms of submission of research proposal and dedication. The software will be developed using RUP method with analysis using data flow diagram and ERM so that the result of this research is documentation and synchronization of data and information of research activity and community service which can be used in preparing documents report for accreditation institution.

HELIOS Third Joint Working Group Meeting

NASA Technical Reports Server (NTRS)

Ousley, Gilbert; Kutzer, Ants

1970-01-01

During the past six months since the Second Helios Joint Working Group Meeting held 27-30 April 1970 at Goddard Space Flight Center, the TDS Sub-Group supported the Helios Project Office and the other Sub-Groups in the timely disposition of action items and the dissemination of information pertinent to the development of interface documentation. Of particular importance during this time period was the Project's decision to incorporate a single-channel telemetry system design aboard the spacecraft. The TDS Sub-Group participated actively in the process that led to this decision. Still under active study with TDS participation is the pending Project Office decision regarding the incorporation of a ranging capability within the telecommunications design. The TDS Sub-Group assisted the Mission Analysis and Operations Sub-Group in establishment of a study effort concerning the Near-Earth Sequence of Events from launch to launch plus 8 hours. This study, which will provide valuable data for the spacecraft telecommunications design, will include participation by the Experiment, Launch Vehicle, Spacecraft, as well as the TDS and MA&O Sub-Groups. Also during the past 6-month period, the TDS, in conjunction with the Spacecraft Sub-Group, initiated activity to develop the Helios Spacecraft/TDS Compatibility Test Plans and Procedures. Activity concerning the foregoing interface discussions has been and will continue to be based upon the "TDS Estimated Capabilities Document for the Helios Missions" (613-1), and the "DSN/Flight Project Interface Design Handbook" (810-5). These will continue to be considered TDS controlling documents until specific Helios Project/TDS interface documentation is generated and signed off by the respective parties. In addition to the above, the DSN continued the Helios Trainee Program with seven GfW/DFVLR trainees in residence at JPL. Two trainees will complete their year's residency concurrent with the Third Helios Joint Working Group Meeting, while four new trainees are expected to arrive following the Third Helios Joint Working Group Meeting. These and other activities are reported in detail in the paragraphs that follow.

Actualizacion Matematica, AM-1 (Modernizing Mathematics, AM-1).

ERIC Educational Resources Information Center

Parot, Jean Jacques

This document, based on mathematical research conducted by the Instituto Colombiano de Pedagogia, is the first in a series of scheduled publications designed to report recent findings to teachers and to offer new methodological guidelines in teaching math. This document suggests elementary-level learning activities for helping the students develop…

Flight Deck Interval Management Flight Test Final Report

NASA Technical Reports Server (NTRS)

Tulder, Paul V.

2017-01-01

This document provides a summary of the avionics design, implementation, and evaluation activities conducted for the ATD-1 Avionics Phase 2. The flight test data collection and a subset of the analysis results are described. This report also documents lessons learned, conclusions, and recommendations to guide further development efforts.

48 CFR 252.232-7006 - Wide Area WorkFlow Payment Instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...— (1) Have a designated electronic business point of contact in the System for Award Management at... submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol... that uniquely identifies a unit, activity, or organization. Document type means the type of payment...

48 CFR 252.232-7006 - Wide Area WorkFlow Payment Instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...— (1) Have a designated electronic business point of contact in the System for Award Management at... submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol... that uniquely identifies a unit, activity, or organization. Document type means the type of payment...

Constellation Program (CxP) Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) Independent Design Reliability Assessment. Volume 2; Appendices

NASA Technical Reports Server (NTRS)

Kelly, Michael J.

2010-01-01

This document contains the Appendices to the report documenting the activities, findings, and NASA Engineering and Safety Center (NESC) recommendations of a multidiscipline team to independently assess the Constellation Program (CxP) Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS). The assessment occurred during a period of 15 noncontiguous months between December 2008 and April 2010, prior to the CPAS Project's Preliminary Design Review (PDR) in August 2010.

Architectural Design Document for the Technology Demonstration of the Joint Network Defence and Management System (JNDMS) Project

DTIC Science & Technology

2009-09-21

specified by contract no. W7714-040875/001/SV. This document contains the design of the JNDMS software to the system architecture level. Other...alternative for the presentation functions. ASP, Java, ActiveX , DLL, HTML, DHTML, SOAP, .NET HTML, DHTML, XML, Jscript, VBScript, SOAP, .NET...retrieved through the network, typically by a network management console. Information is contained in a Management Information Base (MIB), which is a data

Shoeboxes and Taxes: Integrated Course Design Unleashes New Creativity for a Veteran Teacher

ERIC Educational Resources Information Center

Huber, Marsha M.

2009-01-01

This article discusses how the author used an integrated course design model to create new learning activities in her course on federal taxation. The shoebox case--a simulation where students are given realistic documents to use in preparing a tax return--gave her students an opportunity to construct new knowledge. This activity supported the…

Assisting in Radiology/Imaging. Instructor's Guide, Student's Manual, and Student Learning Activities.

ERIC Educational Resources Information Center

Fair, Helena J.

The instructor's guide, the first of three documents in this package, is designed for a course to help students who are investigating the activities within a radiology department or considering any of the imaging technologies as a career. The material is designed to relate training experience to information studied in the classroom. This…

PROCESS DOCUMENTATION: A MODEL FOR KNOWLEDGE MANAGEMENT IN ORGANIZATIONS.

PubMed

Haddadpoor, Asefeh; Taheri, Behjat; Nasri, Mehran; Heydari, Kamal; Bahrami, Gholamreza

2015-10-01

Continuous and interconnected processes are a chain of activities that turn the inputs of an organization to its outputs and help achieve partial and overall goals of the organization. These activates are carried out by two types of knowledge in the organization called explicit and implicit knowledge. Among these, implicit knowledge is the knowledge that controls a major part of the activities of an organization, controls these activities internally and will not be transferred to the process owners unless they are present during the organization's work. Therefore the goal of this study is identification of implicit knowledge and its integration with explicit knowledge in order to improve human resources management, physical resource management, information resource management, training of new employees and other activities of Isfahan University of Medical Science. The project for documentation of activities in department of health of Isfahan University of Medical Science was carried out in several stages. First the main processes and related sub processes were identified and categorized with the help of planning expert. The categorization was carried out from smaller processes to larger ones. In this stage the experts of each process wrote down all their daily activities and organized them into general categories based on logical and physical relations between different activities. Then each activity was assigned a specific code. The computer software was designed after understanding the different parts of the processes, including main and sup processes, and categorization, which will be explained in the following sections. The findings of this study showed that documentation of activities can help expose implicit knowledge because all of inputs and outputs of a process along with the length, location, tools and different stages of the process, exchanged information, storage location of the information and information flow can be identified using proper documentation. A documentation program can create a complete identifier for every process of an organization and also acts as the main tool for establishment of information technology as the basis of the organization and helps achieve the goal of having electronic and information technology based organizations. In other words documentation is the starting step in creating an organizational architecture. Afterwards, in order to reach the desired goal of documentation, computer software containing all tools, methods, instructions and guidelines and implicit knowledge of the organization was designed. This software links all relevant knowledge to the main text of the documentation and identification of a process and provides the users with electronic versions of all documentations and helps use the explicit and implicit knowledge of the organization to facilitate the reengineering of the processes in the organization.

Supplemental design requirements document, Multifunction Waste Tank Facility, Project W-236A. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groth, B.D.

The Multi-Function Waste Tank Facility (MWTF) consists of four, nominal 1 million gallon, underground double-shell tanks, located in the 200-East area, and two tanks of the same capacity in the 200-West area. MWTF will provide environmentally safe storage capacity for wastes generated during remediation/retrieval activities of existing waste storage tanks. This document delineates in detail the information to be used for effective implementation of the Functional Design Criteria requirements.

Web-based document image processing

NASA Astrophysics Data System (ADS)

Walker, Frank L.; Thoma, George R.

1999-12-01

Increasing numbers of research libraries are turning to the Internet for electron interlibrary loan and for document delivery to patrons. This has been made possible through the widespread adoption of software such as Ariel and DocView. Ariel, a product of the Research Libraries Group, converts paper-based documents to monochrome bitmapped images, and delivers them over the Internet. The National Library of Medicine's DocView is primarily designed for library patrons are beginning to reap the benefits of this new technology, barriers exist, e.g., differences in image file format, that lead to difficulties in the use of library document information. To research how to overcome such barriers, the Communications Engineering Branch of the Lister Hill National Center for Biomedical Communications, an R and D division of NLM, has developed a web site called the DocMorph Server. This is part of an ongoing intramural R and D program in document imaging that has spanned many aspects of electronic document conversion and preservation, Internet document transmission and document usage. The DocMorph Server Web site is designed to fill two roles. First, in a role that will benefit both libraries and their patrons, it allows Internet users to upload scanned image files for conversion to alternative formats, thereby enabling wider delivery and easier usage of library document information. Second, the DocMorph Server provides the design team an active test bed for evaluating the effectiveness and utility of new document image processing algorithms and functions, so that they may be evaluated for possible inclusion in other image processing software products being developed at NLM or elsewhere. This paper describes the design of the prototype DocMorph Server and the image processing functions being implemented on it.

Preliminary System Design of the SWRL Financial System.

ERIC Educational Resources Information Center

Ikeda, Masumi

The preliminary system design of the computer-based Southwest Regional Laboratory's (SWRL) Financial System is outlined. The system is designed to produce various management and accounting reports needed to maintain control of SWRL operational and financial activities. Included in the document are descriptions of the various types of system…

Launch Deployment Assembly Extravehicular Activity Neutral Buoyancy Development Test Report

NASA Technical Reports Server (NTRS)

Loughead, T.

1996-01-01

This test evaluated the Launch Deployment Assembly (LDA) design for Extravehicular Activity (EVA) work sites (setup, igress, egress), reach and visual access, and translation required for cargo item removal. As part of the LDA design, this document describes the method and results of the LDA EVA Neutral Buoyancy Development Test to ensure that the LDA hardware support the deployment of the cargo items from the pallet. This document includes the test objectives, flight and mockup hardware description, descriptions of procedures and data collection used in the testing, and the results of the development test at the National Aeronautics and Space Administrations (NASA) Marshall Space Flight Center (MSFC) Neutral Buoyancy Simulator (NBS).

Use of EEG to Track Visual Attention in Two Dimensions

DTIC Science & Technology

2014-05-01

lateralizations of 12Hz and 18Hz activity. A second experiment was then designed to track attention locus as it varied either horizontally or 1...policy or decision, unless so designated by other documentation. 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS (ES) U.S. Army Research Office...endogenous lateralizations of 12Hz and 18Hz activity. A second experiment was then designed to track attention locus as it varied either horizontally or

Energy Conservation Education for New York State. Interdisciplinary Learning Activities. Grades 7-12.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

Provided in this document are 18 energy conservation activities designed to supplement regular classroom learning activities. A matrix correlating activity number with grade level and subject areas is included. Titles of activities are: puzzles; energy quiz; energy-related careers; reading a meter; trading calories for kilo-watts; conserving home…

25 CFR 900.131 - What role does the Secretary play during the performance of a self-determination construction...

Code of Federal Regulations, 2011 CFR

2011-04-01

... phase activities. The Secretary shall provide the Indian tribe or tribal organization with an opportunity to review the project construction documents at the concept phase, the schematic phase, the design development phase, and the final construction documents phase, or as otherwise negotiated. Upon receipt of...

Especially for Teachers: Selected Documents on the Teaching of Science 1966-1981.

ERIC Educational Resources Information Center

Helgeson, Stanley, Comp.; And Others

Designed to supplement the day-to-day planning, teaching, and evaluation activities of science teachers at all educational levels, this compilation contains over 900 resumes of practitioner-oriented documents announced in "Resources in Education" (RIE) between 1966 and 1981. The resumes are presented under these headings: (1) elementary…

Mobile site safety review for the transuranic (TRU) waste characterization program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1996-11-01

This Safety Review Document (SRD) applies to the Active/Passive Neutron Examination and Assay (APNEA) system installed on a Lockheed Martin Specialty Components, Inc., (Specialty Components) trailer. The APNEA is designed to perform nuclear waste drum assay. The purpose of this document is to describe the safety features of the APNEA system.

Institutional Commitment to Sustainability: An Evaluation of Natural Resource Extension Programs in Universities in Alabama and Oregon

ERIC Educational Resources Information Center

Broussard, Shorna R.; Bliss, John C.

2007-01-01

Purpose: The purpose of this research is to determine institutional commitment to sustainability by examining Natural Resource Extension program inputs, activities, and participation. Design/methodology/approach: A document analysis of Natural Resource Extension planning and reporting documents was conducted to provide contextual and historical…

Predators and Prey: Jordan Lake State Recreation Area. An Environmental Education Learning Experience Designed for Grades K-3.

ERIC Educational Resources Information Center

Boswell, Henry, III; Stamm, Daniel K.

This document provides hands-on environmental education activities for the classroom and the outdoor setting of Jordan Lake State Recreation Area. The activity packet, designed for grades K-3, meets curriculum objectives of the standard course of study established by the North Carolina Department of Public Instruction. It includes on-site…

Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

LECHELT, J.A.

2000-10-17

The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System,more » Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.« less

Development of Integrated Programs for Aerospace-vehicle design (IPAD): Reference design process

NASA Technical Reports Server (NTRS)

Meyer, D. D.

1979-01-01

The airplane design process and its interfaces with manufacturing and customer operations are documented to be used as criteria for the development of integrated programs for the analysis, design, and testing of aerospace vehicles. Topics cover: design process management, general purpose support requirements, design networks, and technical program elements. Design activity sequences are given for both supersonic and subsonic commercial transports, naval hydrofoils, and military aircraft.

Physical Conditioning through Water Exercises.

ERIC Educational Resources Information Center

Conrad, C. Carson

This document describes activities in an aquatic program designed for an individual in sound health. Instructions for performing each activity are given in step-by-step outline form. The activities are arranged under the following categories: standing water drills; pool-side standing drills; gutter holding drills; bobbing (various forms);…

Exploring Work: Fun Activities for Girls.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA. Women's Educational Equity Act Dissemination Center.

This document contains learning activities to help middle school girls begin the career planning process and resist gender-role stereotyping. The activities are designed for individuals and/or groups of girls either in classroom settings or in organizations such as Girl Scouts and 4-H Clubs. A total of 30 activities are organized into 4 sections…

After-School Physical Activity and Eating Behaviors of Middle School Students in Relation to Adult Supervision

ERIC Educational Resources Information Center

Miller, Wayne C.; Hering, Michelle; Cothran, Carrie; Croteau, Kim; Dunlap, Rebecca

2012-01-01

Objective: Examine after-school activity patterns, eating behaviors, and social environment of overweight and normal weight middle school students. Design: Eating and physical activity behaviors of 141 students, ages 10-14, were monitored. Students completed a diary documenting type of activity, location, adult supervision, accompanying…

Towards a Web-Based Handbook of Generic, Process-Oriented Learning Designs

ERIC Educational Resources Information Center

Marjanovic, Olivera

2005-01-01

Process-oriented learning designs are innovative learning activities that include a set of inter-related learning tasks and are generic (could be used across disciplines). An example includes a problem-solving process widely used in problem-based learning today. Most of the existing process-oriented learning designs are not documented, let alone…

All about Me: Reproducible Activity Sheets To Develop Self-Esteem in Your Students.

ERIC Educational Resources Information Center

Palomares, Susanna

This document contains a set of reproducible activity sheets for teachers to use in enhancing the self-esteem of their students. Designed to supplement other approaches being used by teachers, the activities in this book can be used to infuse esteem-building activities into the core curriculum. The activities are organized around several…

Text Generation: The State of the Art and the Literature.

ERIC Educational Resources Information Center

Mann, William C.; And Others

This report comprises two documents which describe the state of the art of computer generation of natural language text. Both were prepared by a panel of individuals who are active in research on text generation. The first document assesses the techniques now available for use in systems design, covering all of the technical methods by which…

Patient Activities Planning and Progress Noting a Humanistic Integrated-Team Approach.

ERIC Educational Resources Information Center

Muilenburg, Ted

This document outlines a system for planning recreation therapy, documenting progress, and relating the entire process to a team approach which includes patient assessment and involvement. The recreation program is seen as therapeutic, closely related to the total medical treatment program. The model is designed so that it can be adapted to almost…

Career Awareness. A K-3 Activities Book.

ERIC Educational Resources Information Center

Kennedy, Minnie; And Others

The classroom activities presented in the document were designed by primary teachers in the Anchorage Borough School District for field-testing and evaluation in the 12 elementary schools in the Exemplorary Career Education Project. The activities, for grades K-3, are arranged under the following areas: self-knowledge and interpersonal relations,…

Classroom Activities to Combat Stereotyping in Career Choice.

ERIC Educational Resources Information Center

American Institutes for Research in the Behavioral Sciences, Palo Alto, CA.

Designed to be used by classroom teachers in combatting sex, race, and handicap stereotyping with respect to career choice, this document contains examples of activities which are appropriate for students from Kindergarten to grade twelve. The twelve activities included in the section of sex role stereotyping are grouped into three broad…

Federal Activities Addressing Violence in Schools. Special Report.

ERIC Educational Resources Information Center

Barrios, Lisa C., Comp.

Many federal agencies actively address the problem of violence in schools by acquiring and disseminating information about school violence and supporting strategies that work to reduce violence. This document provides an inventory of federal activities addressing violence in schools. It was designed to facilitate coordination of federal school…

MSFC Skylab airlock module, volume 2. [systems design and performance, systems support activity, and reliability and safety programs

NASA Technical Reports Server (NTRS)

1974-01-01

System design and performance of the Skylab Airlock Module and Payload Shroud are presented for the communication and caution and warning systems. Crew station and storage, crew trainers, experiments, ground support equipment, and system support activities are also reviewed. Other areas documented include the reliability and safety programs, test philosophy, engineering project management, and mission operations support.

Human factors engineering in oil and gas--a review of industry guidance.

PubMed

Robb, Martin; Miller, Gerald

2012-01-01

Oil and gas exploration and production activities are carried out in hazardous environments in many parts of the world. Recent events in the Gulf of Mexico highlight those risks and underline the importance of considering human factors during facility design. Ergonomic factors such as machinery design, facility and accommodation layout and the organization of work activities have been systematically considered over the past twenty years on a limited number of offshore facility design projects to a) minimize the occupational risks to personnel, b) support operations and maintenance tasks and c) improve personnel wellbeing. During this period, several regulators and industry bodies such as the American Bureau of Shipping (ABS), the American Society of Testing and Materials (ASTM), the UK's Health and Safety Executive (HSE), Oil and Gas Producers (OGP), and Norway's Petroleum Safety Authority (PSA) have developed specific HFE design standards and guidance documents for the application of Human Factors Engineering (HFE) to the design and operation of Oil and Gas projects. However, despite the existence of these guidance and recommended design practise documents, and documented proof of their value in enhancing crew safety and efficiency, HFE is still not well understood across the industry and application across projects is inconsistent. This paper summarizes the key Oil and Gas industry bodies' HFE guidance documents, identifies recurring themes and current trends in the use of these standards, provides examples of where and how these HFE standards have been used on past major offshore facility design projects, and suggests criteria for selecting the appropriate HFE strategy and tasks for future major oil and gas projects. It also provides a short history of the application of HFE to the offshore industry, beginning with the use of ASTM F 1166 to a major operator's Deepwater Gulf of Mexico facility in 1990 and the application of HFE to diverse world regions. This latter point highlights the need to consider user populations when selecting HFE design criteria, an aspect strongly emphasized in current industry guidance.

Gross Motor Development.

ERIC Educational Resources Information Center

Florida Learning Resources System/CROWN, Jacksonville.

The document is designed to help teachers identify and remediate gross motor development deficits in elementary school students. A definition of gross motor development and a checklist of gross motor skills are provided. Sections cover the following topics: successful teaching techniques; activities for perceptual-motor training; activities for…

Nature's Art.

ERIC Educational Resources Information Center

Sterling, Vicki; And Others

Over 60 art activities, designed to enhance environmental awareness and incorporate environmental concepts, are outlined in this document. A sample of the activities presented are: decorated notepaper and cards with feathers or weeds; wall plaques of prairie plants; methods of flower preservation; water plant prints; construction of dolls,…

Children's Literature with a Science Emphasis: Twenty Teacher-Developed K-8 Activity Packets.

ERIC Educational Resources Information Center

Butler, Malcolm B.

This document features 10 science activity packets developed for elementary students by science teachers in a graduate seminar. The activity packets were designed to cover existing commercial children's books on specific content areas. The 10 activity packets are: (1) "Bringing the Rain to Kapiti Plain," which explains the water cycle;…

76 FR 20990 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... Communication Research will design and administer the study. The proposed study will assess consumers' emotional... will help FDA to design more effective consumer food recall messages during and after a recall. FDA... collection of information is 354 hours (table 1 of this document). To help design and refine the...

Heating and Cooling System Design for a Modern Transportable Container

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berger, Jason E.

Sandia National Laboratories (SNL) has been tasked with the design of a modern transportable container (MTC) for use in high reliability transportation environments. The container is required to transport cargo capable of generating its own heat and operate under the United States’ climatic extremes. In response to these requirements, active heating and cooling is necessary to maintain a controlled environment inside the container. The following thesis project documents the design of an active heating, active cooling, and combined active heating and cooling system (now referred to as active heating and cooling systems) through computational thermal analyses, scoping of commercial systemmore » options, and mechanical integration with the container’s structure.« less

Physical therapist assistants' perceptions of the documented roles of the physical therapist assistant.

PubMed

Robinson, A J; DePalma, M T; McCall, M

1995-12-01

This study investigated physical therapist assistants' (PTAs) perceptions of the documented roles of PTAs and compared those perceptions with those of physical therapists from a previous study. A questionnaire that described 79 physical therapy activities was distributed to a sample (n = 400) of PTAs derived from the American Physical Therapy Association membership. The response rate was 56% (n = 225). Respondents indicated whether each activity was included in the documentation describing PTA roles. Discriminant analyses were used to determine whether demographic factors predicted the pattern of responses. In addition, meta-analytic techniques were used to determine whether PTA responses were different from those of physical therapists gathered previously. The greatest agreement of PTA opinions with published guidelines occurred for treatment implementation activities, and the lowest level of agreement occurred for items designated as administrative activities. Responses of PTAs were different from those of physical therapists on 21 of the 79 activities. The greatest number of these differences occurred for evaluative functions (n = 9). Physical therapist assistants' perceptions of documented PTA roles were generally less consistent with published guidelines than were those of physical therapists. Physical therapist assistants' perceptions of the roles of the PTA were, for some activities, not consistent with written guidelines. Using the data provided in this study, discussions to revise the documentation of the scope of PTA practice may focus on those activities for which disagreement between PTAs and physical therapists exists and for which opinions differ markedly from published guidelines. [Robinson AJ, DePalma MT, McCall M. Physical therapist assistants' perceptions of the documented roles of the physical therapist assistant.

Care Planning for Prostate Cancer Patients on Active Surveillance

DTIC Science & Technology

2017-10-01

U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 DISTRIBUTION STATEMENT: Approved for Public Release...Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704...Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION / AVAILABILITY

Physical and rehabilitation medicine (PRM) care pathways: "patients after rotator cuff tear surgery".

PubMed

Ribinik, P; Calmels, P; Barrois, B; Le Moine, F; Yelnik, A P

2011-11-01

This document is part of a series of documents designed by the French Physical and Rehabilitation Medicine Society (Sofmer) and the French Federation of PRM (Fedmer). These documents describe the needs for or a specific type of patients; PRM care objectives, human and material resources to be implemented, chronology as well as expected outcomes. "Care pathways in PRM" is a short document designed to enable the reader (physicians, decision-maker, administrator, lawyer or finance manager) to quickly apprehend the needs of these patients and the available therapeutic care structures for proper organization and pricing of these activities. Patients after rotator cuff tear surgery are classified into four care sequences and two clinical categories, taking into account personal and environmental factors that could influence patients' needs, in accordance with the International Classification of Functioning (ICF) (WHO). 2011 Elsevier Masson SAS. All rights reserved.

Physical and rehabilitation medicine (PRM) care pathways: "patients after knee ligament surgery".

PubMed

Calmels, P; Ribinik, P; Barrois, B; Le Moine, F; Yelnik, A-P

2011-11-01

This document is part of a series of documents designed by the French Physical and Rehabilitation Medicine Society (Sofmer) and the French Federation of PRM (Fedmer). These documents describe the needs for or a specific type of patients; PRM care objectives, human and material resources to be implemented, chronology as well as expected outcomes. "Care pathways in PRM" is a short document designed to enable the reader (physicians, decision-maker, administrator, lawyer or finance manager) to quickly apprehend the needs of these patients and the available therapeutic care structures for proper organization and pricing of these activities. Patients after knee ligament surgery are classified into four care sequences and two clinical categories, taking into account personal and environmental factors that could influence patients' needs, in accordance with the International Classification of Functioning (WHO). 2011 Elsevier Masson SAS. All rights reserved.

Physical and rehabilitation medicine (PRM) care pathways: "stroke patients".

PubMed

Yelnik, A-P; Schnitzler, A; Pradat-Diehl, P; Sengler, J; Devailly, J-P; Dehail, P; D'anjou, M-C; Rode, G

2011-11-01

This document is part of a series of documents designed by the French Physical and Rehabilitation Medicine Society (SOFMER) and the French Federation of PRM (FEDMER). These documents describe the needs for a specific type of patients; PRM care objectives, human and material resources to be implemented, chronology as well as expected outcomes. "Care pathways in PRM" is a short document designed to enable the reader (physicians, decision-maker, administrator, lawyer or finance manager) to quickly apprehend the needs of these patients and the available therapeutic care structures for proper organization and pricing of these activities. Stroke patients are divided into four categories according to the severity of the impairments, each one being treated according to the same six parameters according to the International Classification of Functioning, Disability and Health (WHO), while taking into account personal and environmental factors that could influence the needs of these patients. 2011 Elsevier Masson SAS. All rights reserved.

Directory of Energy Information Administration model abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-08-11

This report contains brief statements from the model managers about each model's title, acronym, purpose, and status, followed by more detailed information on characteristics, uses, and requirements. Sources for additional information are identified. All models ''active'' through March 1987 are included. The main body of this directory is an alphabetical list of all active EIA models. Appendix A identifies major EIA modeling systems and the models within these systems, and Appendix B identifies active EIA models by type (basic, auxiliary, and developing). A basic model is one designated by the EIA Administrator as being sufficiently important to require sustained supportmore » and public scrutiny. An auxiliary model is one designated by the EIA Administrator as being used only occasionally in analyses, and therefore requires minimal levels of documentation. A developing model is one designated by the EIA Administrator as being under development and yet of sufficient interest to require a basic level of documentation at a future date. EIA also leases models developed by proprietary software vendors. Documentation for these ''proprietary'' models is the responsibility of the companies from which they are leased. EIA has recently leased models from Chase Econometrics, Inc., Data Resources, Inc. (DRI), the Oak Ridge National Laboratory (ORNL), and Wharton Econometric Forecasting Associates (WEFA). Leased models are not abstracted here. The directory is intended for the use of energy and energy-policy analysts in the public and private sectors.« less

Lasers. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of laser technology. The guide uses a series of hands-on exploratory experiences into which activities to help students develop…

Electrical Experiments. VT-214-12-5. Part V. Transformers.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this fifth document in a series of six electrical learning activity packages focuses on transformers. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of information sheets and job sheets on…

Electrical Experiments. VT-214-12-3. Part III. Basic Electronics.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this third document in a series of six electrical learning activity packages focuses on basic electronics. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of information sheets and job…

A Physical Activity Program to Mobilize Older People: A Practical and Sustainable Approach

ERIC Educational Resources Information Center

Jancey, Jonine M.; Clarke, Ann; Howat, Peter A.; Lee, Andy H.; Shilton, Trevor; Fisher, John

2008-01-01

Purpose: Despite the documented benefits of physical activity, it remains difficult to motivate older adults to start and maintain regular physical activity. This study tested an innovative intervention for mobilizing older adults into a neighborhood-based walking program. Design and Methods: Researchers recruited a total of 260 healthy but…

Robotics-Control Technology. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of robotics-control technology. The guide uses hands-on exploratory experiences into which activities to help students develop…

Recommendations for the use of notebooks in upper-division physics lab courses

NASA Astrophysics Data System (ADS)

Stanley, Jacob T.; Lewandowski, H. J.

2018-01-01

The use of lab notebooks for scientific documentation is a ubiquitous part of physics research. However, it is common for undergraduate physics laboratory courses not to emphasize the development of documentation skills, despite the fact that such courses are some of the earliest opportunities for students to start engaging in this practice. One potential impediment to the inclusion of explicit documentation training is that it may be unclear to instructors which features of authentic documentation practice are efficacious to teach and how to incorporate these features into the lab class environment. In this work, we outline some of the salient features of authentic documentation, informed by interviews with physics researchers, and provide recommendations for how these can be incorporated into the lab curriculum. We do not focus on structural details or templates for notebooks. Instead, we address holistic considerations for the purpose of scientific documentation that can guide students to develop their own documentation style. While taking into consideration all the aspects that can help improve students' documentation, it is also important to consider the design of the lab activities themselves. Students should have experience with implementing these authentic features of documentation during lab activities in order for them to find practice with documentation beneficial.

Impacts of Computerized Physician Documentation in a Teaching Hospital: Perceptions of Faculty and Resident Physicians

PubMed Central

Embi, Peter J.; Yackel, Thomas R.; Logan, Judith R.; Bowen, Judith L.; Cooney, Thomas G.; Gorman, Paul N.

2004-01-01

Objective: Computerized physician documentation (CPD) has been implemented throughout the nation's Veterans Affairs Medical Centers (VAMCs) and is likely to increasingly replace handwritten documentation in other institutions. The use of this technology may affect educational and clinical activities, yet little has been reported in this regard. The authors conducted a qualitative study to determine the perceived impacts of CPD among faculty and housestaff in a VAMC. Design: A cross-sectional study was conducted using semistructured interviews with faculty (n = 10) and a group interview with residents (n = 10) at a VAMC teaching hospital. Measurements: Content analysis of field notes and taped transcripts were done by two independent reviewers using a grounded theory approach. Findings were validated using member checking and peer debriefing. Results: Four major themes were identified: (1) improved availability of documentation; (2) changes in work processes and communication; (3) alterations in document structure and content; and (4) mistakes, concerns, and decreased confidence in the data. With a few exceptions, subjects felt documentation was more available, with benefits for education and patient care. Other impacts of CPD were largely seen as detrimental to aspects of clinical practice and education, including documentation quality, workflow, professional communication, and patient care. Conclusion: CPD is perceived to have substantial positive and negative impacts on clinical and educational activities and environments. Care should be taken when designing, implementing, and using such systems to avoid or minimize any harmful impacts. More research is needed to assess the extent of the impacts identified and to determine the best strategies to effectively deal with them. PMID:15064287

Telephone intervention promoting weight-related health behaviors

USDA-ARS?s Scientific Manuscript database

Recent national surveys have documented that the majority of adults in the United States do not meet the recommended levels of healthy lifestyle-related behaviors. The Nutrition and Physical Activity (NuPA) study was designed to promote fruit and vegetable consumption, physical activity, and weight ...

Analysis of body calcium (regional changes in body calcium by in vivo neutron activation analysis)

NASA Technical Reports Server (NTRS)

Suki, W.; Johnson, P. C.; Leblanc, A.; Evans, H. J.

1981-01-01

The effect of space flight on urine and fecal calcium loss was documented during the three long-term Skylab flights. Neutron activation analysis was used to determine regional calcium loss. Various designs for regional analysis were investigated.

The Living Ocean. SeaWiFS: Studying Ocean Color from Space. Teacher's Guide with Activities

NASA Technical Reports Server (NTRS)

1994-01-01

This educational document, designed for grades 9 to 10, discusses the observation of oceans from space. Topics covered include ocean color, the role of phytoplankton, the carbon cycle, and the greenhouse effect. Activities and discussion questions are presented.

On Campus Study of Florida Wildlife: Project Report.

ERIC Educational Resources Information Center

Newcomb-Jones, Carol

Ecosystem management is an integrated approach to managing Florida's biological and physical environments designed to maintain, protect, and improve the state's natural, managed, and human communities. This document contains activities designed for 4th-5th grade students that meet the guidelines of Florida's K-12 Science Framework to better…

Formative Evaluation of Project "TEAM" (Teens Making Environment and Activity Modifications)

ERIC Educational Resources Information Center

Kramer, Jessica M.; Roemer, Kristin; Liljenquist, Kendra; Shin, Julia; Hart, Stacy

2014-01-01

Research documents the negative impact of physical and social environmental barriers on engagement in school, work, and the community for youth with intellectual and /or developmental disabilities (IDD). Project "TEAM" (Teens making Environment and Activity Modifications) was designed to teach youth to systematically identify…

Evaluating SPP/APR Improvement Activities

ERIC Educational Resources Information Center

National Early Childhood Technical Assistance Center (NECTAC), 2009

2009-01-01

This document is intended to assist State Education Agency (SEA) and Lead Agency (LA) staff and technical assistance providers in designing a meaningful evaluation for the State Performance Plan (SPP)/Annual Performance Report (APR) improvement activities. It provides: (1) information about the relevance of evaluation in the context of improvement…

Back Pack: Parent and Child Kits. Actividades para la Familia: Octubre. The Best of BES--Basic Educational Skills Materials.

ERIC Educational Resources Information Center

Southwest Educational Development Lab., Austin, TX.

One of a series of documents produced by a nationwide network of early childhood education specialists, teachers, parents, and Head Start staff, the document presents a packet of over 52 home activities in both Spanish and English. Designed for teachers and parents of kindergarteners, the packet was intended to help teachers facilitate the…

Documentation for the Academic Library Survey (ALS) Data File: Fiscal Year 2004 (Public Use). NCES 2007-343

ERIC Educational Resources Information Center

Schmitt, Carl M.; O'Shae, Patricia; Vaden, Kaleen; Williams, Jeffrey W.

2007-01-01

This manual describes the methods, procedures, techniques, and activities that were used to produce the Academic Library Survey of 2004 (ALS:2004). This manual is designed to provide guidance and documentation for users of the ALS data. Included in the manual are the following: an overview of the study and its predecessor studies; an account of…

Dysregulated microRNA activity in Shwachman-Diamond Syndrome

DTIC Science & Technology

2017-09-01

Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No . 0704-0188 Public...Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for...commitment, and found that SDS hematopoiesis was left-shifted with selective loss of granulocyte-monocyte progenitors (GMPs). Differential gene

Student-Centered Pedagogy and Real-World Research: Using Documents as Sources of Data in Teaching Social Science Skills and Methods

ERIC Educational Resources Information Center

Peyrefitte, Magali; Lazar, Gillian

2018-01-01

This teaching note describes the design and implementation of an activity in a 90-minute teaching session that was developed to introduce a diverse cohort of first-year criminology and sociology students to the use of documents as sources of data. This approach was contextualized in real-world research through scaffolded, student-centered tasks…

Spacecraft System Integration and Test: SSTI Lewis critical design audit

NASA Technical Reports Server (NTRS)

Brooks, R. P.; Cha, K. K.

1995-01-01

The Critical Design Audit package is the final detailed design package which provides a comprehensive description of the SSTI mission. This package includes the program overview, the system requirements, the science and applications activities, the ground segment development, the assembly, integration and test description, the payload and technology demonstrations, and the spacecraft bus subsystems. Publication and presentation of this document marks the final requirements and design freeze for SSTI.

Evaluation of Classroom Active Engagement in Elementary Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Sparapani, Nicole; Morgan, Lindee; Reinhardt, Vanessa P.; Schatschneider, Christopher; Wetherby, Amy M.

2016-01-01

This study evaluated the classroom measure of active engagement (CMAE), an observational tool designed to measure active engagement in students with autism spectrum disorder (ASD). Participants included 196 students with ASD and their educators (n = 126) who were video-recorded at the beginning of the school year. Findings documented limited…

Electrical Experiments. VT-214-12-2. Part II. A-C Across the Line Control.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this second document in a series of six electrical learning activity packages focuses on alternating current across-the-line control. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of…

Electrical Experiments. VT-214-12-1. Part I. Electric Motor Control.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this first document in a series of six electrical learning activity packages focuses on electric motor control. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of information sheets and job…

Access 5 - Step 1: Human Systems Integration Program Plan (HSIPP)

NASA Technical Reports Server (NTRS)

2005-01-01

This report describes the Human System Interface (HSI) analysis, design and test activities that will be performed to support the development of requirements and design guidelines to facilitate the incorporation of High Altitude Long Endurance (HALE) Remotely Operated Aircraft (ROA) at or above FL400 in the National Airspace System (NAS). These activities are required to support the design and development of safe, effective and reliable ROA operator and ATC interfaces. This plan focuses on the activities to be completed for Step 1 of the ACCESS 5 program. Updates to this document will be made for each of the four ACCESS 5 program steps.

Adding Family Numeracy to ABLE Programs.

ERIC Educational Resources Information Center

Community Action Southwest, Waynesburg, PA.

This document consists of a brief final report and a handbook from a project conducted to develop family numeracy activities and incorporate them into adult basic and literacy education (ABLE) classes in two Pennsylvania counties. The 10 activities, which were designed to help adult learners foster the development of numeracy concepts/skills in…

The American Revolution: The Declaration and Beyond. [Lesson Plan].

ERIC Educational Resources Information Center

Kasper, Paula

Based on Thomas Paine's pamphlet "Common Sense," this lesson plan presents activities designed to help students understand that as the American Revolution approached, writers created highly persuasive documents calling for separation from England. The main activity in the lesson involves students in writing a persuasive essay. It includes…

Language and Program for Documenting Software Design

NASA Technical Reports Server (NTRS)

Kleine, H.; Zepko, T. M.

1986-01-01

Software Design and Documentation Language (SDDL) provides effective communication medium to support design and documentation of complex software applications. SDDL supports communication among all members of software design team and provides for production of informative documentation on design effort. Use of SDDL-generated document to analyze design makes it possible to eliminate many errors not detected until coding and testing attempted. SDDL processor program translates designer's creative thinking into effective document for communication. Processor performs as many automatic functions as possible, freeing designer's energy for creative effort. SDDL processor program written in PASCAL.

Conceptual design of the National Ignition Facility

NASA Astrophysics Data System (ADS)

Paisner, Jeffrey A.; Boyes, John D.; Kumpan, Steven A.; Lowdermilk, W. Howard; Sorem, Michael S.

1995-12-01

The Secretary of the U.S. Department of Energy (DOE) commissioned a conceptual design report (CDR) for the National Ignition Facility (NIF) in January 1993 as part of a key decision zero (KD0), justification of mission need. Motivated by the progress to date by the inertial confinement fusion (ICF) program in meeting the Nova technical contract goals established by the National Academy of Sciences in 1989, the Secretary requested a design using a solid-state laser driver operating at the third harmonic (0.35 micrometer) of neodymium (Nd) glass. The participating ICF laboratories signed a memorandum of agreement in August 1993, and established a project organization, including a technical team from the Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), and the Laboratory for Laser Energetics at the University of Rochester. Since then, we completed the NIF conceptual design, based on standard construction at a generic DOE defense program's site, and issued a 7,000-page, 27-volume CDR in May 1994. Over the course of the conceptual design study, several other key documents were generated, including a facilities requirements document, a conceptual design scope and plan, a target physics design document, a laser design cost basis document, a functional requirements document, an experimental plan for indirect drive ignition, and a preliminary hazards analysis (PHA) document. DOE used the PHA to categorize the NIF as a low-hazard, non-nuclear facility. On October 21, 1994 the Secretary of Energy issued a key decision one (KD1) for the NIF, which approved the project and authorized DOE to request Office of Management and Budget-approval for congressional line-item FY 1996 NIF funding for preliminary engineering design and for National Environmental Policy Act activities. In addition, the Secretary declared Livermore as the preferred site for constructing the NIF. In February 1995, the NIF Project was formally submitted to Congress as part of the President's FY 1996 budget. If funded as planned, the Project will cost approximately $1.1 billion and will be completed at the end of FY 2002.

Learning about the Human Body. Superific Science Book IV. A Good Apple Science Activity Book for Grades 5-8+.

ERIC Educational Resources Information Center

Conway, Lorraine

Designed to supplement a basic life science or biology program, this document provides teachers with experiential learning activities dealing with the human body. The learning activities vary in the length of time needed for their completion, and require a minimum of equipment and materials. The activities focus on: (1) the human skeleton; (2)…

Overview of MSFC's Applied Fluid Dynamics Analysis Group Activities

NASA Technical Reports Server (NTRS)

Garcia, Roberto; Wang, Tee-See; Griffin, Lisa; Turner, James E. (Technical Monitor)

2001-01-01

This document is a presentation graphic which reviews the activities of the Applied Fluid Dynamics Analysis Group at Marshall Space Flight Center (i.e., Code TD64). The work of this group focused on supporting the space transportation programs. The work of the group is in Computational Fluid Dynamic tool development. This development is driven by hardware design needs. The major applications for the design and analysis tools are: turbines, pumps, propulsion-to-airframe integration, and combustion devices.

Fusion Genes Predict Prostate Cancer Recurrence

DTIC Science & Technology

2017-10-01

URL for any Internet site(s) that disseminates the results of the research activities. A short description of each site should be provided. It is not...University of Wisconsin System Madison, WI 53715 REPORT DATE: October 2017 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and...policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden

Genetic Networks Activated by Blast Injury to the Eye

DTIC Science & Technology

2015-08-01

NG ORGANIZATION: Emory University Atlanta, GA 30322 REPORT DATE: August 2015 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and...policy or decision unless so designated by other documentation. I REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden...Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 11.SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION I AVAILABILITY

A Novel Approach to Assay DNA Methylation in Prostate Cancer

DTIC Science & Technology

2017-12-01

concordant with repression or activation of those nearby genes.15 More recently, a series of chromosome conformation capture (3C)-based approaches ...AWARD NUMBER: W81XWH-13-1-0319 TITLE: A Novel Approach to Assay DNA Methylation in Prostate Cancer PRINCIPAL INVESTIGATOR: Jindan Yu...Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No

Best Management Practices (BMPs) for Soils Treatment Technologies

EPA Pesticide Factsheets

Document providing guidance on how to design and conduct soil remediation activities at RCRA and other hazardous waste sites so that transfers of contaminants from contaminated soil to other media are minimized.

Best Practices in Career Development. Activities for Third Grade. A Supplement to the Blueprint for Career Preparation.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains 19 lesson plans that can be used for career awareness activities in third grade. The lessons were developed by teachers and submitted as part of the Florida Blueprint for Career Preparation. The lesson plans include a topic, materials and information needed, and directions for activities. Lesson plans are designated by…

Learning about Animals. Superific Science Book III. A Good Apple Science Activity Book for Grades 5-8+.

ERIC Educational Resources Information Center

Conway, Lorraine

Designed to arouse interest in students about animals, this document was developed to provide teachers with a variety of information and teaching activities. The booklet is intended to enable students to become knowledgeable about science concepts relating to animals without the use of expensive equipment. The teaching activities deal with: (1)…

Best Practices in Career Development. Activities for Fifth Grade. A Supplement to the Blueprint for Career Preparation.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains 17 lesson plans that can be used for career awareness activities in fifth grade. The lessons were developed by teachers and submitted as part of the Florida Blueprint for Career Preparation. The lesson plans include a topic, materials and information needed, and directions for activities. Lesson plans are designated by…

Language Arts & Science Sample Career Education Activities, Grades 7-12. Career Choices.

ERIC Educational Resources Information Center

Marion County Educational Service District, Salem, OR.

Designed to infuse career education with language arts and science, these teacher-developed activities for grades 7-12 are based on one of seven teacher competencies identified by an Oregon task force (see CE 019 665 for the project description). The activities in this document are based on teacher competency number 7: assist students to reject…

ETF Mission Statement document. ETF Design Center team

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-04-01

The Mission Statement document describes the results, activities, and processes used in preparing the Mission Statement, facility characteristics, and operating goals for the Engineering Test Facility (ETF). Approximately 100 engineers and scientists from throughout the US fusion program spent three days at the Knoxville Mission Workshop defining the requirements that should be met by the ETF during its operating life. Seven groups were selected to consider one major category each of design and operation concerns. Each group prepared the findings of the assigned area as described in the major sections of this document. The results of the operations discussed mustmore » provide the data, knowledge, experience, and confidence to continue to the next steps beyond the ETF in making fusion power a viable energy option. The results from the ETF mission (operations are assumed to start early in the 1990's) are to bridge the gap between the base of magnetic fusion knowledge at the start of operations and that required to design the EPR/DEMO devices.« less

Physical and rehabilitation medicine (PRM) care pathways: "spinal cord injury".

PubMed

Albert, T; Beuret Blanquart, F; Le Chapelain, L; Fattal, C; Goossens, D; Rome, J; Yelnik, A P; Perrouin Verbe, B

2012-09-01

This document is part of a series of documents designed by the French Physical and Rehabilitation Medicine Society (SOFMER) and the French Federation of PRM (FEDMER). These documents describe the needs for or a specific type of patients; PRM care objectives, human and material resources to be implemented, chronology as well as expected outcomes. "Care pathways in PRM" is a short document designed to enable the reader (physicians, decision-maker, administrator, lawyer or finance manager) to quickly apprehend the needs of these patients and the available therapeutic care structures for proper organization and pricing of these activities. The patients after spinal cord injury are divided into five categories according to the severity of the impairments, each one being treated according to the same six parameters according to the International Classification of Functioning, Disability and Health (WHO), while taking into account personal and environmental factors that could influence the needs of these patients. Copyright © 2012. Published by Elsevier Masson SAS.

Physical and rehabilitation medicine (PRM) care pathways: "patients after total knee arthroplasty".

PubMed

Ribinik, P; Le Moine, F; de Korvin, G; Coudeyre, E; Genty, M; Rannou, F; Yelnik, A; Calmels, P

2012-11-01

This document is part of a series of documents designed by the French Physical and Rehabilitation Medicine Society (SOFMER) and the French Federation of PRM (FEDMER). These documents describe the needs for or a specific type of patients; PRM care objectives, human and material resources to be implemented, chronology as well as expected outcomes. "Care pathways in PRM" is a short document designed to enable the reader (physicians, decision-maker, administrator, lawyer or finance manager) to quickly apprehend the needs of these patients and the available therapeutic care structures for proper organization and pricing of these activities. Patients after total knee arthroplasty are classified into three care sequences and two clinical categories, each one being treated with the same six parameters according to the International Classification of Functioning, Disability and Health (WHO), while taking into account personal and environmental factors that could influence the needs of these patients. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Physical and rehabilitation medicine (PRM) care pathways: "patients after total hip arthroplasty".

PubMed

Ribinik, P; Le Moine, F; de Korvin, G; Coudeyre, E; Genty, M; Rannou, F; Yelnik, A; Calmels, P

2012-11-01

This document is part of a series of documents designed by the French Physical and Rehabilitation Medicine Society (SOFMER) and the French Federation of PRM (FEDMER). These documents describe the needs for or a specific type of patients; PRM care objectives, human and material resources to be implemented, chronology as well as expected outcomes. "Care pathways in PRM" is a short document designed to enable the reader (physicians, decision-maker, administrator, lawyer or finance manager) to quickly apprehend the needs of these patients and the available therapeutic care structures for proper organization and pricing of these activities. Patients after total hip arthroplasty are classified into three care sequences and two clinical categories, each one being treated with the same six parameters according to the International Classification of Functioning, Disability and Health (WHO), while taking into account personal and environmental factors that could influence the needs of these patients. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Draft Report for the 1994 Travel Behavior Survey

DOT National Transportation Integrated Search

1995-01-01

The Triangle Travel Behavior Survey, an essential element in the regional study of transportation activity and travel patterns, was conducted under the auspices of the Triangle Transit Authority. This report documents the design, implementation, and ...

Energy Adventure.

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Designed as an interdisciplinary, supplemental teaching guide, this document provides fundamental information about energy supply, use, and conservation and related learning activities for secondary students. Eight units address the following topics: energy history, petroleum, natural gas, coal, electricity, alternative sources, energy…

Army-NASA aircrew/aircraft integration program. Phase 5: A3I Man-Machine Integration Design and Analysis System (MIDAS) software concept document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Neukom, Christian; Nishimura, Sayuri; Prevost, Michael; Shankar, Renuka; Staveland, Lowell; Smith, Greg

1992-01-01

This is the Software Concept Document for the Man-machine Integration Design and Analysis System (MIDAS) being developed as part of Phase V of the Army-NASA Aircrew/Aircraft Integration (A3I) Progam. The approach taken in this program since its inception in 1984 is that of incremental development with clearly defined phases. Phase 1 began in 1984 and subsequent phases have progressed at approximately 10-16 month intervals. Each phase of development consists of planning, setting requirements, preliminary design, detailed design, implementation, testing, demonstration and documentation. Phase 5 began with an off-site planning meeting in November, 1990. It is expected that Phase 5 development will be complete and ready for demonstration to invited visitors from industry, government and academia in May, 1992. This document, produced during the preliminary design period of Phase 5, is intended to record the top level design concept for MIDAS as it is currently conceived. This document has two main objectives: (1) to inform interested readers of the goals of the MIDAS Phase 5 development period, and (2) to serve as the initial version of the MIDAS design document which will be continuously updated as the design evolves. Since this document is written fairly early in the design period, many design issues still remain unresolved. Some of the unresolved issues are mentioned later in this document in the sections on specific components. Readers are cautioned that this is not a final design document and that, as the design of MIDAS matures, some of the design ideas recorded in this document will change. The final design will be documented in a detailed design document published after the demonstrations.

I Wonder. Science Worksheets for the Primary Grades.

ERIC Educational Resources Information Center

Daniel, Charlie; Daniel, Becky

Designed to use simple materials that can be found in almost any household, this document provides elementary teachers and students with activities and worksheets that deal with basic scientific concepts. The activities are intended to help students form and test their own hypotheses. Each topic in the booklet is addressed through a simple…

A Visual Approach to Helping Instructors Integrate, Document, and Refine Active Learning

ERIC Educational Resources Information Center

Frey, Regina F.; Fisher, Beth A.; Solomon, Erin D.; Leonard, Denise A.; Mutambuki, Jacinta M.; Cohen, Cheryl A.; Luo, Jia; Pondugula, Santhi

2016-01-01

This article describes a visual approach to integrating observational data into self-evaluation and peer review of teaching, practices that can lead to adoption of evidence-based active-learning strategies in STEM. This approach was designed to be implemented for undergraduate courses across disciplines. The presentation of observational data in a…

Explorations; Part I, Revised: Career Activities for Adult Education Classes.

ERIC Educational Resources Information Center

Feingold, S. Norman

The Adult Career Education Resources Survey was designed to (a) compile career information resources for adults and (b) provide materials that will encourage adult educators to integrate career education activities into ongoing curricula. The document was developed and revised by the Suvey staff to meet the second objective; it provides a group of…

Working in Pharmacies. Instructor's Guide. Student's Manual. Student Learning Activities. Second Revised Edition.

ERIC Educational Resources Information Center

Driever, Carl W.; And Others

This document combines three separately bound volumes, a student manual, an instructor's guide, and student learning activities designed for students who are either in beginning-level pharmacy technician courses or considering careers in pharmacy. The material is intended to relate training experience to information studied in the classroom. The…

Review of Educational Activities, Bureau of Indian Affairs, Part I.

ERIC Educational Resources Information Center

Department of the Interior, Washington, DC.

The document reports an audit review made of educational activities within the Bureau of Indian Affairs (BIA) area offices in Anadarko and Muskogee, Oklahoma; Gallup, New Mexico; Juneau, Alaska; and Phonenix, Arizona. The field work, completed in 1967, was designed to (1) compile financial information to correlate with measures of output, (2)…

Transparent superstrate terrestrial solar cell module

NASA Technical Reports Server (NTRS)

1977-01-01

The design, development, fabrication, and testing of the transparent solar cell module were examined. Cell performance and material process characteristics were determined by extensive tests and design modifications were made prior to preproduction fabrication. These tests included three cell submodules and two full size engineering modules. Along with hardware and test activity, engineering documentation was prepared and submitted.

Girls Are Great. Contemporary Issues: Growing Up Female.

ERIC Educational Resources Information Center

Mosatche, Harriet S.; And Others

This document is designed to help Girl Scout leaders understand the maturation of girls and how to assist the girls in their development. The information and activities described in this booklet are designed to help girls see themselves in a positive way, understand some of the forces that influence them as they develop, and cope with the stresses…

The New Youth Entrepreneur: Getting Ready for Entrepreneurship. Opportunities-They Are All Around You. Module 2.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the second module, designed to help students define the notion of opportunity, determine sources of…

Interactive Print: The Design of Cognitive Tasks in Blended Augmented Reality and Print Documents

ERIC Educational Resources Information Center

Nadolny, Larysa

2017-01-01

The combination of print materials and augmented reality in education is increasingly accessible due to advances in mobile technologies. Using familiar paper-based activities overlaid with digital items, also known as interactive print, educators can create a custom learning experience for students. There is very little guidance on the design of…

Using Sociocultural Perspectives: The Dynamic Process of Designing and Implementing Class Activities in an Online Japanese Language Course

ERIC Educational Resources Information Center

Shibakawa, Mayumi

2012-01-01

The study documented the dynamic process of designing and implementing instructional interventions in an online course of Japanese language and culture at a two-year college. The results have impact in three distinct areas: pedagogical, theoretical, and methodological. First, the interventions that encouraged student agency with rich…

IPG Job Manager v2.0 Design Documentation

NASA Technical Reports Server (NTRS)

Hu, Chaumin

2003-01-01

This viewgraph presentation provides a high-level design of the IPG Job Manager, and satisfies its Master Requirement Specification v2.0 Revision 1.0, 01/29/2003. The presentation includes a Software Architecture/Functional Overview with the following: Job Model; Job Manager Client/Server Architecture; Job Manager Client (Job Manager Client Class Diagram and Job Manager Client Activity Diagram); Job Manager Server (Job Manager Client Class Diagram and Job Manager Client Activity Diagram); Development Environment; Project Plan; Requirement Traceability.

The ACEE program and basic composites research at Langley Research Center (1975 to 1986): Summary and bibliography

NASA Technical Reports Server (NTRS)

Dow, Marvin B.

1987-01-01

Composites research conducted at the Langley Research Center during the period from 1975 to 1986 is described, and an annotated bibliography of over 600 documents (with their abstracts) is presented. The research includes Langley basic technology and the composite primary structures element of the NASA Aircraft Energy Efficiency (ACEE) Program. The basic technology documents cited in the bibliography are grouped according to the research activity such as design and analysis, fatigue and fracture, and damage tolerance. The ACEE documents cover development of composite structures for transport aircraft.

Missing Children. Missing Children Data Collected by the National Crime Information Center. Fact Sheet for the Honorable Alfonse M. D'Amato, United States Senate.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

This document is a fact sheet on missing children data collected by the National Crime Information Center (NCIC). The document contains details on the design of the NCIC system, state control for management and use of the system, access to the system, criteria for missing persons, number of active cases, and the unidentified persons file of the…

Learning about Earth Science: Tables and Tabulations. Superific Science Book X. A Good Apple Science Activity Book for Grades 5-8+.

ERIC Educational Resources Information Center

Conway, Lorraine

In an effort to provide science teachers with the tables and scales most often used in teaching earth science, this document was designed to coordinate each table with meaningful activities, projects and experiments. The major areas covered by the booklet are: (1) electromagnetic waves (with activities about light waves and sound waves); (2) the…

Federal Aviation Administration Curriculum Guide for Aviation Magnet Schools Programs

DOT National Transportation Integrated Search

1994-01-01

Prepared ca. 1994. This publication is designed to provide: : - a brief history of the role of aviation in motivating young : people to learn. : - examples of aviation magnet activities, programs, projects and : school curriculums. : - documentation ...

Software Maintenance of the Subway Environment Simulation Computer Program

DOT National Transportation Integrated Search

1980-12-01

This document summarizes the software maintenance activities performed to support the Subway Environment Simulation (SES) Computer Program. The SES computer program is a design-oriented analytic tool developed during a recent five-year research proje...

Space station definition and preliminary design, WP-01. Volume 2: Results

NASA Technical Reports Server (NTRS)

Lenda, J. A.

1987-01-01

The basis for the studies and analyses which led to the results and conclusions documented and summarized, was the Engineering Master Schedule (EMS) generated by NASA and used as the controlling set of milestones and associated activities required to produce in a timely manner those products needed by all program participants in the establishment of an approved program baseline. The EMS consisted of twenty themes grouped into categories covering requirements, configurations, and strategies. A number of studies and analyses that were coordinated with the MSFC program and technical personnel as being needed to provide the requisite back-up material to satify the EMS were identified. These studies and analyses provided the data sufficient to support the conclusions and recommendations given to the MSFC in response to their EMS activity and to support the system level and conceptual design level approaches developed and reflected in the detailed sections of this document.

Calendar years 1989 and 1990 monitoring well installation program Y-12 plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-10-01

This report documents the well-construction activities at the Y-12 Plant in Oak Ridge, Tennessee during 1989 and 1990. The well- construction program consisted of installing seventy-five monitoring wells. Geologists from ERCE (formally the Engineering, Design and Geosciences Group) and Martin Marietta Energy Systems (Energy Systems), supervised and documented well-construction activities and monitored for health and safety concerns. Sixty-seven monitoring wells were installed under the supervision of an ERCE geologist from March 1989 to September 1990. Beginning in September 1990, Energy Systems supervised drilling activities for eight monitoring wells, the last of which was completed in December 1990. 9 refs., 3more » figs., 2 tabs.« less

Design, Fabrication, and Testing of an Auxiliary Cooling System for Jet Engines

NASA Technical Reports Server (NTRS)

Leamy, Kevin; Griffiths, Jim; Andersen, Paul; Joco, Fidel; Laski, Mark; Balser, Jeffrey (Technical Monitor)

2001-01-01

This report summarizes the technical effort of the Active Cooling for Enhanced Performance (ACEP) program sponsored by NASA. It covers the design, fabrication, and integrated systems testing of a jet engine auxiliary cooling system, or turbocooler, that significantly extends the use of conventional jet fuel as a heat sink. The turbocooler is designed to provide subcooled cooling air to the engine exhaust nozzle system or engine hot section. The turbocooler consists of three primary components: (1) a high-temperature air cycle machine driven by engine compressor discharge air, (2) a fuel/ air heat exchanger that transfers energy from the hot air to the fuel and uses a coating to mitigate fuel deposits, and (3) a high-temperature fuel injection system. The details of the turbocooler component designs and results of the integrated systems testing are documented. Industry Version-Data and information deemed subject to Limited Rights restrictions are omitted from this document.

Launch Deployment Assembly Human Engineering Analysis

NASA Technical Reports Server (NTRS)

Loughead, T.

1996-01-01

This report documents the human engineering analysis performed by the Systems Branch in support of the 6A cargo element design. The human engineering analysis is limited to the extra vehicular activities (EVA) which are involved in removal of various cargo items from the LDA and specific activities concerning deployment of the Space Station Remote Manipulator System (SSRMS).

Assisting in the Medical Laboratory. Instructor's Guide, Students' Manual, and Student Learning Activities.

ERIC Educational Resources Information Center

Fair, Helena J.

The instructor's guide, the first of three documents in this package, is for a course to help students who are investigating the activities within a hospital, clinic, or physician's office. The material is designed to relate training experience to information studied in the classroom. The course is intended for individualized study and is…

Parents in Partnership for Proficiency: For 3rd & 4th Graders and Their Families.

ERIC Educational Resources Information Center

Neiner, Christine; And Others

This document contains a series of learning materials for 3rd and 4th graders and their families. The materials are designed to augment classroom learning. Included are worksheets, games, and other skill building activities for writing, reading, math, citizenship, and science. These activities are meant to help children prepare for proficiency…

Implementing Process Oriented Guided Inquiry Learning (POGIL) in Undergraduate Biomechanics: Lessons Learned by a Novice

ERIC Educational Resources Information Center

Simonson, Shawn R.; Shadle, Susan E.

2013-01-01

Process Oriented Guided Inquiry Learning (POGIL) uses specially designed activities and cooperative learning to teach content and to actively engage students in inquiry, analytical thinking and teamwork. It has been used extensively in Chemistry education, but the use of POGIL is not well documented in other physical and biological sciences. This…

The Biggest Plates on Earth. Submarine Ring of Fire--Grades 5-6. Plate Tectonics.

ERIC Educational Resources Information Center

National Oceanic and Atmospheric Administration (DOC), Rockville, MD.

This activity is designed to teach how tectonic plates move, what some consequences of this motion are, and how magnetic anomalies document the motion at spreading centers do. The activity provides learning objectives, a list of needed materials, key vocabulary words, background information, day-to-day procedures, internet connections, career…

In situ gas treatment technology demonstration test plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, E.C.; Miller, R.D.

1996-02-16

This document defines the objectives and requirements associated with undertaking a field demonstration of an in situ gas treatment appoach to remediation chromate-contaminated soil. The major tasks presented in this plan include the design and development of the surface gas treatment system, performance of permitting activities, and completion of site preparation and field testing activities.

Structural Design Requirements and Factors of Safety for Spaceflight Hardware: For Human Spaceflight. Revision A

NASA Technical Reports Server (NTRS)

Bernstein, Karen S.; Kujala, Rod; Fogt, Vince; Romine, Paul

2011-01-01

This document establishes the structural requirements for human-rated spaceflight hardware including launch vehicles, spacecraft and payloads. These requirements are applicable to Government Furnished Equipment activities as well as all related contractor, subcontractor and commercial efforts. These requirements are not imposed on systems other than human-rated spacecraft, such as ground test articles, but may be tailored for use in specific cases where it is prudent to do so such as for personnel safety or when assets are at risk. The requirements in this document are focused on design rather than verification. Implementation of the requirements is expected to be described in a Structural Verification Plan (SVP), which should describe the verification of each structural item for the applicable requirements. The SVP may also document unique verifications that meet or exceed these requirements with NASA Technical Authority approval.

The Effect of a Microprocessor Prosthetic Foot on Function and Quality of Life in Transtibial Amputees Who Are Limited Community Ambulators

DTIC Science & Technology

2017-09-01

parallel, randomized, controlled clinical trial designed to determine if a microprocessor controlled prosthetic foot (MPF), with greater range of...clinical trial designed to determine if a microprocessor controlled prosthetic foot (MPF), with greater range of motion and active power, will...Department of the Army position, policy or decision unless so designated by other documentation. CONTRACTING ORGANIZATION: University of Tennessee

Synthesizing the Scientific Foundation for Ordinary High Water Mark Delineation in Fluvial Systems

DTIC Science & Technology

2016-12-01

an official Department of the Army position unless so designated by other authorized documents. DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT...system. The active channel can be designated as • any portion of a valley bottom within channels defined by erosional and depositional features...however, do not have continuous surface flow at all times. These rivers are designated as either ephemeral or intermittent. Ephem- eral rivers are those

Molecular Mechanisms and Treatment Strategies for Obesity-Associated Coronary Artery Disease, an Imminent Military Epidemic

DTIC Science & Technology

2009-12-01

or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden...efficiencies of efferocytosis. In future studies stimulated by this grant, we plan to study mouse models of PPAR activation and depletion to test our...eNampt levels when diet-induced obese mice are switched to a low-calorie diet. Stimulated by these findings, we plan to test causation by restoring

Maintaining a permanent plot data base for growth and yield research: Solutions to some recurring problems

Treesearch

John C. Byrne

1993-01-01

Methods for solving some recurring problems of maintaining a permanent plot data base for growth and yield reseuch are described. These methods include documenting data from diverse sampling designs, changing sampling designs, changing field procedures, and coordinating activities in the plots with the land management agency. Managing a permanent plot data base (...

Collective Designing and Sharing of Open Educational Resources: A Study of the French CARTOUN Platform

ERIC Educational Resources Information Center

Quere, Nolwenn

2017-01-01

Designing and sharing Open Educational Resources (OERs) requires teachers to develop new competences, in particular with digital resources. In this paper, the case of a language resource production group is introduced. Due to the centrality of the OERs in their collective activity, I show that the documents they produce are essential to the…

Acquisition Handbook - Update. Comprehensive Approach to Reusable Defensive Software (CARDS)

DTIC Science & Technology

1994-03-25

designs, and implementation components (source code, test plans, procedures and results, and system/software documentation). This handbook provides a...activities where software components are acquired, evaluated, tested and sometimes modified. In addition to serving as a facility for the acquisition and...systems from such components [1]. Implementation components are at the lowest level and consist of: specifications; detailed designs; code, test

Exploring Careers.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

This document contains a career education resource guide for junior high school students which is designed to build career awareness by means of occupational narratives, evaluative questions, activities, and career games. The information is presented in the following fourteen occupational clusters: industrial production occupations; office…

14 CFR 1216.304 - Categorical exclusions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... funds. (iv) Preparation of documents, including design and feasibility studies, analytical supply and... sampling, cultural resources surveys, biological surveys, geologic surveys, modeling or simulations, and... Indian tribe, State, and/or local law or requirements. (3) Research and Development (R&D) Activities...

Project Quality Assurance Plan for research and development services provided by Oak Ridge National Laboratory in support of the Westinghouse Materials Company of Ohio Operable Unit 1 Stabilization Development and Treatability Studies Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilliam, T.M.

1991-05-01

This Project Quality Assurance Plan (PQAP) sets forth the quality assurance (QA) requirements that are applied to those elements of the Westinghouse Materials Company of Ohio (WMCO) Operable Unit 1 support at Oak Ridge National Laboratory (ORNL) project that involve research and development (R D) performed at ORNL. This is in compliance with the applicable criteria of 10 CFR Part 50, Appendix B, ANSI/ASME NQA-1, as specified by Department of Energy (DOE) Oak Ridge Operations (ORO) Order 5700.6B. For this application, NQA-1 is the core QA Program requirements document. QA policy, normally found in the requirements document, is contained herein.more » The requirements of this PQAP apply to project activities that affect the quality and reliability/credibility of research, development, and investigative data and documentation. These activities include the functions of attaining quality objectives and assuring that an appropriate QA program scope is established. The scope of activities affecting quality includes organization; personnel training and qualifications; design control; procurement; material handling and storage; operating procedures; testing, surveillance, and auditing; R D investigative activities and documentation; deficiencies; corrective actions; and QA record keeping. 12 figs.« less

International Perspectives on Adapted Physical Activity. Selected Papers Presented at the International Symposium on Adapted Physical Activity (5th, Toronto, Canada, October 1-4, 1985).

ERIC Educational Resources Information Center

Berridge, Mavis E., Ed.; Ward, Graham R., Ed.

The 36 papers in this book were presented at the Fifth International Symposium on Adapted Physical Activity. Presentations document some of the research findings and new ideas in physical education and recreation programs designed to improve the quality of life for special populations. The collection represents the breadth of the field, from the…

Role of standard documents in advancing the standardization of microfluidics connectors

NASA Astrophysics Data System (ADS)

Tantra, Ratna; van Heeren, Henne; Jarman, John

2016-04-01

An emerging trend within the microfluidic community is to standardize common parts in order to facilitate design and production activities. The goal is clear: to enhance interoperability and promote plug-and-play. A recent launch of a pan-European project, Microfluidic (MF) Manufacturing, has identified an item that is in immediate need of standardization: having in place geometrical specifications for MF connectors. In order to accelerate the adoption of such standards, there is a need to consider the pivotal role of standard documents. The purpose of this paper is to provide background information on document standards development. In addition, the future implications related to the MF manufacturing project will be discussed. A strengths, weaknesses, opportunities, and threats analysis has been carried out to identify points of action. The findings show that although there is a need to publish under International Organization for Standardization (ISO), the actual realization of a full ISO standard document is not feasible. The recommendation is to initially publish via an ISO Workshop Agreement. Parallel to such activity, there is a need to encourage stakeholders help kick start a currently dormant working group that supports microfluidics under ISO to help pave the way for future standardization activities in the microfluidics community.

Influence of Burke and Lessing on the Semiotic Theory of Document Design: Ideologies and Good Visual Images of Documents.

ERIC Educational Resources Information Center

Ding, Daniel D.

2000-01-01

Presents historical roots of page design principles, arguing that current theories and practices of document design have their roots in gender-related theories of images. Claims visual design should be evaluated regarding the rhetorical situation in which the design is used. Focuses on visual images of documents in professional communication,…

Development of electronic medical record charting for hospital-based transfusion and apheresis medicine services: Early adoption perspectives

PubMed Central

Levy, Rebecca; Pantanowitz, Liron; Cloutier, Darlene; Provencher, Jean; McGirr, Joan; Stebbins, Jennifer; Cronin, Suzanne; Wherry, Josh; Fenton, Joseph; Donelan, Eileen; Johari, Vandita; Andrzejewski, Chester

2010-01-01

Background: Electronic medical records (EMRs) provide universal access to health care information across multidisciplinary lines. In pathology departments, transfusion and apheresis medicine services (TAMS) involved in direct patient care activities produce data and documentation that typically do not enter the EMR. Taking advantage of our institution's initiative for implementation of a paperless medical record, our TAMS division set out to develop an electronic charting (e-charting) strategy within the EMR. Methods: A focus group of our hospital's transfusion committee consisting of transfusion medicine specialists, pathologists, residents, nurses, hemapheresis specialists, and information technologists was constituted and charged with the project. The group met periodically to implement e-charting TAMS workflow and produced electronic documents within the EMR (Cerner Millenium) for various service line functions. Results: The interdisciplinary working group developed and implemented electronic versions of various paper-based clinical documentation used by these services. All electronic notes collectively gather and reside within a unique Transfusion Medicine Folder tab in the EMR, available to staff with access to patient charts. E-charting eliminated illegible handwritten notes, resulted in more consistent clinical documentation among staff, and provided greater realered. However, minor updates and corrections to documents as well as select work re-designs were required for optimal use of e-charting-time review/access of hemotherapy practices. No major impediments to workflow or inefficiencies have been encount by these services. Conclusion: Documentation of pathology subspecialty activities such as TAMS can be successfully incorporated into the EMR. E-charting by staff enhances communication and helps promote standardized documentation of patient care within and across service lines. Well-constructed electronic documents in the EMR may also enhance data mining, quality improvement, and biovigilance monitoring activities. PMID:20805955

Preparing for Computer Use. Revised.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia.

Intended to assist school districts in designing high school credit courses, preparing staff development activities related to computer utilization, and selecting and evaluating instructional software, this document offers outlines for the following student courses: (1) Introduction to Computers, a computer literacy course covering computer…

Investigating Passively Floating and Weakly Swimming Organisms: An Activity for Beginning Marine Education Students.

ERIC Educational Resources Information Center

Schlenker, Richard M.

This document presents the outline of a marine biology science unit designed to introduce students to the study and collection of plankton. Extensive details on plankton collections and a seven-item quiz are included. (SL)

14 CFR § 1216.304 - Categorical exclusions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... funds. (iv) Preparation of documents, including design and feasibility studies, analytical supply and... sampling, cultural resources surveys, biological surveys, geologic surveys, modeling or simulations, and... Indian tribe, State, and/or local law or requirements. (3) Research and Development (R&D) Activities...

Vehicle information exchange needs for mobility applications : version 3.0.

DOT National Transportation Integrated Search

1996-06-01

The Evaluatory Design Document provides a unifying set of assumptions for other evaluations to utilize. Many of the evaluation activities require the definition of an actual implementation in order to be performed. For example, to cost the elements o...

Forensic intelligence applied to questioned document analysis: A model and its application against organized crime.

PubMed

De Alcaraz-Fossoul, Josep; Roberts, Katherine A

2017-07-01

The capability of forensic sciences to fight crime, especially against organized criminal groups, becomes relevant in the recent economic downturn and the war on terrorism. In view of these societal challenges, the methods of combating crime should experience critical changes in order to improve the effectiveness and efficiency of the current resources available. It is obvious that authorities have serious difficulties combating criminal groups of transnational nature. These are characterized as well structured organizations with international connections, abundant financial resources and comprised of members with significant and diverse expertise. One common practice among organized criminal groups is the use of forged documents that allow for the commission of illegal cross-border activities. Law enforcement can target these movements to identify counterfeits and establish links between these groups. Information on document falsification can become relevant to generate forensic intelligence and to design new strategies against criminal activities of this nature and magnitude. This article discusses a methodology for improving the development of forensic intelligence in the discipline of questioned document analysis. More specifically, it focuses on document forgeries and falsification types used by criminal groups. It also describes the structure of international criminal organizations that use document counterfeits as means to conduct unlawful activities. The model presented is partially based on practical applications of the system that have resulted in satisfactory outcomes in our laboratory. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

Photovoltaic system criteria documents. Volume 4: Review criteria for photovoltaic applications

NASA Technical Reports Server (NTRS)

Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

1979-01-01

Guidelines are provided for the organization, preparation and conduct of program reviews for photovoltaic applications. These criteria apply to all photovoltaic applications. They include, but are not limited to, the following: (1) Conceptual design review; (2) Preliminary design review; (3) Critical design review; and (4) Operational readiness review. Contract goal's and objectives are met through program monitoring for cost, schedule, and performance for both managerial and technical elements for all PV applications activities.

Special Plans and Operations: Assessment of Allegations Concerning Traumatic Brain Injury Research Integrity in Iraq

DTIC Science & Technology

2011-03-31

protocols conducted in Iraq. His office had been designated by the 1 A research protocol is a formal document detailing the study methodology and the...Human Research Protections Program plan requires scientific peer review to ensure that research is scientifically sound in its design and methods, and...ofthe approved research protocol and IRB minutes, revealed that there was no mention of "active rehabilitation and exercise" under the design

Characterization of Steroid Receptor RNA Activator Protein Function in Modulating the Estrogen Signaling Pathway

DTIC Science & Technology

2008-03-01

official Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form...control). Four experiments were performed and the average modifications calculated). A significant (pɘ.05, Student’s t- test ) average increase of 90% in...assessed by TP-PCR at t: 24 h, 48 h, and 72h. We found a significant increase (2.5 fold, pɘ.05, Student’s t- test ) in relative intron-1 retention was

Learning about Heredity and Embryology. Superific Science Book II. A Good Apple Science Activity Book for Grades 5-8+.

ERIC Educational Resources Information Center

Conway, Lorraine

Designed to provide teachers with low cost laboratory exercises, project ideas, and classroom activities for individuals and groups, this document focuses on the concepts of heredity and embryology. The materials address the topics of: (1) cell division; (2) the identification of the human embryo; (3) chromosomes; (4) DNA; (5) differences in the…

Parabolic Dish Solar Thermal Power Annual Program Review Proceedings

NASA Technical Reports Server (NTRS)

Lucas, J. W.

1982-01-01

The results of activities of the parabolic dish technology and applications development element of DOE's Solar Thermal Energy System Program are presented. Topics include the development and testing of concentrators, receivers, and power conversion units; system design and development for engineering experiments; economic analysis and marketing assessment; and advanced development activities. A panel discussion concerning industrial support sector requirements is also documented.

Infusing a Global Perspective into the Study of Agriculture: Student Activities Volume II.

ERIC Educational Resources Information Center

Martin, Robert A., Ed.

These student activities are designed to be used in a variety of places in the curriculum to provide a global perspective for students as they study agriculture. This document is not a unit of instruction; rather, teachers are encouraged to study the materials and decide which will be helpful in adding a global perspective to the learning…

MICE 2.0: Designing Multimedia Content to Foster Active Learning in a Malaysian Classroom

ERIC Educational Resources Information Center

Neo, Tse-Kian; Neo, Mai; Kwok, Wai-Jing; Tan, Yeen-Ju; Lai, Chen-Haw; Zarina, Che Embi

2012-01-01

With the strong emphasis of social constructivism, many educators are finding new ways to stimulate and enhance social activities within the classroom. One such method is the use of cooperative learning. A cohort of students worked in small teams cooperatively to complete an assignment while using blogs to document and reflect their work.…

SDDL- SOFTWARE DESIGN AND DOCUMENTATION LANGUAGE

NASA Technical Reports Server (NTRS)

Kleine, H.

1994-01-01

Effective, efficient communication is an essential element of the software development process. The Software Design and Documentation Language (SDDL) provides an effective communication medium to support the design and documentation of complex software applications. SDDL supports communication between all the members of a software design team and provides for the production of informative documentation on the design effort. Even when an entire development task is performed by a single individual, it is important to explicitly express and document communication between the various aspects of the design effort including concept development, program specification, program development, and program maintenance. SDDL ensures that accurate documentation will be available throughout the entire software life cycle. SDDL offers an extremely valuable capability for the design and documentation of complex programming efforts ranging from scientific and engineering applications to data management and business sytems. Throughout the development of a software design, the SDDL generated Software Design Document always represents the definitive word on the current status of the ongoing, dynamic design development process. The document is easily updated and readily accessible in a familiar, informative form to all members of the development team. This makes the Software Design Document an effective instrument for reconciling misunderstandings and disagreements in the development of design specifications, engineering support concepts, and the software design itself. Using the SDDL generated document to analyze the design makes it possible to eliminate many errors that might not be detected until coding and testing is attempted. As a project management aid, the Software Design Document is useful for monitoring progress and for recording task responsibilities. SDDL is a combination of language, processor, and methodology. The SDDL syntax consists of keywords to invoke design structures and a collection of directives which control processor actions. The designer has complete control over the choice of keywords, commanding the capabilities of the processor in a way which is best suited to communicating the intent of the design. The SDDL processor translates the designer's creative thinking into an effective document for communication. The processor performs as many automatic functions as possible, thereby freeing the designer's energy for the creative effort. Document formatting includes graphical highlighting of structure logic, accentuation of structure escapes and module invocations, logic error detection, and special handling of title pages and text segments. The SDDL generated document contains software design summary information including module invocation hierarchy, module cross reference, and cross reference tables of user selected words or phrases appearing in the document. The basic forms of the methodology are module and block structures and the module invocation statement. A design is stated in terms of modules that represent problem abstractions which are complete and independent enough to be treated as separate problem entities. Blocks are lower-level structures used to build the modules. Both kinds of structures may have an initiator part, a terminator part, an escape segment, or a substructure. The SDDL processor is written in PASCAL for batch execution on a DEC VAX series computer under VMS. SDDL was developed in 1981 and last updated in 1984.

Document Design: Part 1.

ERIC Educational Resources Information Center

Andrews, Deborah C., Ed.; Dyrud, Marilyn, Ed.

1996-01-01

Presents four articles that provide suggestions for teaching document design: (1) "Teaching the Rhetoric of Document Design" (Michael J. Hassett); (2) "Teaching by Example: Suggestions for Assignment Design" (Marilyn A. Dyrud); (3) "Teaching the Page as a Visual Unit" (Bill Hart-Davidson); and (4) "Designing a…

Native American Education.

ERIC Educational Resources Information Center

Mueller, Jean West; Schamel, Wynell Burroughs

1990-01-01

Examines an 1876 letter from a missionary to Ferdinand V. Hayden in the context of the U.S. government's policy of instituting religious education and training for Native Americans. Provides a photocopy of the letter and outlines class activities designed to help students analyze the document. (DB)

Village Green Design, Operations, and Maintenance Document

EPA Science Inventory

The Village Green Project is a community-based activity to demonstrate the capabilities of new real-time monitoring technology for residents and citizen scientists to learn about local air quality. The goal of the project is to provide the public and communities with information ...

Teaching with Documents: Victory Gardens in World War II.

ERIC Educational Resources Information Center

Baars, Patricia, Ed.

1986-01-01

Covers the Victory Garden campaign of the early 1940s begun by the Office of War Information and the Office of Civil Defense. Provides a facsimile of a poster designed to publicize the program in addition to seven teaching activities. (JDH)

Startup Notification Report 3rd Quarter FY17.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeman, Roger D.; Petti, Jason P.

2017-11-01

This activity is being revised based on the November 2016 Project Plan and Installation Plan. These documents were developed and issued due to a change in the design responsibilities, assigned project personnel and the change in the installation of the RCS subsystems.

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

Documenting pharmacist interventions on an intranet.

PubMed

Simonian, Armen I

2003-01-15

The process of developing and implementing an intranet Web site for clinical intervention documentation is described. An inpatient pharmacy department initiated an organizationwide effort to improve documentation of interventions by pharmacists at its seven hospitals to achieve real-time capture of meaningful benchmarking data. Standardization of intervention types would allow the health system to contrast and compare medication use, process improvement, and patient care initiatives among its hospitals. After completing a needs assessment and reviewing current methodologies, a computerized tracking tool was developed in-house and integrated with the organization's intranet. Representatives from all hospitals agreed on content and functionality requirements for the Web site. The site was completed and activated in February 2002. Before this Web site was established, the most documented intervention types were Renal Adjustment and Clarify Dose, with a daily average of four and three, respectively. After site activation, daily averages for Renal Adjustment remained unchanged, but Clarify Dose is now documented nine times per day. Drug Information and i.v.-to-p.o. intervention types, which previously averaged less than one intervention per day, are now documented an average of four times daily. Approximately 91% of staff pharmacists are using this site. Future plans for this site include enhanced accessibility to the site with wireless personal digital assistants. The design and implementation of an intranet Web site to document pharmacists' interventions doubled the rate of intervention documentation and standardized the intervention types among hospitals in the health system.

C4MIP - The Coupled Climate-Carbon Cycle Model Intercomparison Project: experimental protocol for CMIP6

NASA Astrophysics Data System (ADS)

Jones, Chris D.; Arora, Vivek; Friedlingstein, Pierre; Bopp, Laurent; Brovkin, Victor; Dunne, John; Graven, Heather; Hoffman, Forrest; Ilyina, Tatiana; John, Jasmin G.; Jung, Martin; Kawamiya, Michio; Koven, Charlie; Pongratz, Julia; Raddatz, Thomas; Randerson, James T.; Zaehle, Sönke

2016-08-01

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate-Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks are potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate-carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate-carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This paper documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.

C4MIP – The Coupled Climate–Carbon Cycle Model Intercomparison Project: Experimental protocol for CMIP6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Chris D.; Arora, Vivek; Friedlingstein, Pierre

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate–Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks aremore » potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO 2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate–carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate–carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO 2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This study documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.« less

C4MIP – The Coupled Climate–Carbon Cycle Model Intercomparison Project: Experimental protocol for CMIP6

DOE PAGES

Jones, Chris D.; Arora, Vivek; Friedlingstein, Pierre; ...

2016-08-25

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate–Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks aremore » potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO 2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate–carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate–carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO 2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This study documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.« less

Software design and documentation language

NASA Technical Reports Server (NTRS)

Kleine, H.

1977-01-01

A communications medium to support the design and documentation of complex software applications is studied. The medium also provides the following: (1) a processor which can convert design specifications into an intelligible, informative machine reproducible document; (2) a design and documentation language with forms and syntax that are simple, unrestrictive, and communicative; and (3) methodology for effective use of the language and processor.

Design and Documentation: The State of the Art.

ERIC Educational Resources Information Center

Gibbons, Andrew S.

1998-01-01

Although the trend is for less documentation, this article argues that more is needed to help in the analysis of design failure in instructional design. Presents arguments supporting documented design, including error recognition and correction, verification of completeness and soundness, sharing of new design principles, modifiability, error…

A study for active control research and validation using the Total In-Flight Simulator (TIFS) aircraft

NASA Technical Reports Server (NTRS)

Chen, R. T. N.; Daughaday, H.; Andrisani, D., II; Till, R. D.; Weingarten, N. C.

1975-01-01

The results of a feasibility study and preliminary design for active control research and validation using the Total In-Flight Simulator (TIFS) aircraft are documented. Active control functions which can be demonstrated on the TIFS aircraft and the cost of preparing, equipping, and operating the TIFS aircraft for active control technology development are determined. It is shown that the TIFS aircraft is as a suitable test bed for inflight research and validation of many ACT concepts.

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

GLASSCOCK, J.A.

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

2015 Soft Condensed Matter Physics: Self-Assembly and Active Matter GRC/GRS

DTIC Science & Technology

2015-10-20

or decision, unless so designated by other documentation. 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS (ES) U.S. Army Research Office P.O...were Minorities – 0% Hispanic, 14% Asian and 0% African American. Approximately 29% of the participants at the 2015 meeting were women. In designing ...Trees" 8:10 pm - 8:30 pm Discussion 8:30 pm - 9:10 pm Todd Yeates (University of California, Los Angeles, USA) "Using Ideas in Symmetry to Design

Flat-plate solar array project. Volume 6: Engineering sciences and reliability

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.; Smokler, M. I.

1986-01-01

The Flat-Plate Solar Array (FSA) Project activities directed at developing the engineering technology base required to achieve modules that meet the functional, safety, and reliability requirements of large scale terrestrial photovoltaic systems applications are reported. These activities included: (1) development of functional, safety, and reliability requirements for such applications; (2) development of the engineering analytical approaches, test techniques, and design solutions required to meet the requirements; (3) synthesis and procurement of candidate designs for test and evaluation; and (4) performance of extensive testing, evaluation, and failure analysis of define design shortfalls and, thus, areas requiring additional research and development. A summary of the approach and technical outcome of these activities are provided along with a complete bibliography of the published documentation covering the detailed accomplishments and technologies developed.

Software design and documentation language, revision 1

NASA Technical Reports Server (NTRS)

Kleine, H.

1979-01-01

The Software Design and Documentation Language (SDDL) developed to provide an effective communications medium to support the design and documentation of complex software applications is described. Features of the system include: (1) a processor which can convert design specifications into an intelligible, informative machine-reproducible document; (2) a design and documentation language with forms and syntax that are simple, unrestrictive, and communicative; and (3) methodology for effective use of the language and processor. The SDDL processor is written in the SIMSCRIPT II programming language and is implemented on the UNIVAC 1108, the IBM 360/370, and Control Data machines.

Montana Faxnet Project. Final Report.

ERIC Educational Resources Information Center

Brander, Linda L.

This report summarizes the activities and accomplishments of the Montana Faxnet Project, which was created to design and demonstrate a statewide document delivery network utilizing telefacsimile equipment that would create equitable access for all Montanans accessing and retrieving information, and reduce the waiting time for requested materials…

NCTM Student Math Notes.

ERIC Educational Resources Information Center

Maletsky, Evan, Ed.; Yunker, Lee E., Ed.

1986-01-01

Five sets of activities for students are included in this document. Each is designed for use in junior high and secondary school mathematics instruction. The first Note concerns mathematics on postage stamps. Historical procedures and mathematicians, metric conversion, geometric ideas, and formulas are among the topics considered. Successful…

Use of an Adverse Outcome Pathway for Hepatic Steatosis to Build Chemical Groups

EPA Science Inventory

The Adverse Outcome Pathway (AOP) framework systematically documents the mechanisms underlying effects of chemicals starting with the initial interaction of chemicals with the biological system, i.e. the molecular initiating event (MIE). Chemical activity in assays designed to mo...

Contracting to improve your revenue cycle performance.

PubMed

Welter, Terri L; Semko, George A; Miller, Tony; Lauer, Roberta

2007-09-01

The following key drivers of commercial contract variability can have a material effect on your hospital's revenue cycle: Claim form variance. Benefit design. Contract complexity. Coding variance. Medical necessity. Precertification/authorization. Claim adjudication/appeal requirements. Additional documentation requirements. Timeliness of payment. Third-party payer activity.

7 CFR 1485.16 - Reimbursement rules.

Code of Federal Regulations, 2010 CFR

2010-01-01

... design and production of packaging, labeling or origin identification, to be used during the activity... exceeds locally prevailing levels which the MAP participant shall document by a salary survey or other...) Market research; (17) Evaluations, if not required by CCC to ensure compliance with program requirements...

7 CFR 1485.16 - Reimbursement rules.

Code of Federal Regulations, 2011 CFR

2011-01-01

... design and production of packaging, labeling or origin identification, to be used during the activity... exceeds locally prevailing levels which the MAP participant shall document by a salary survey or other...) Market research; (17) Evaluations, if not required by CCC to ensure compliance with program requirements...

Swimnastics Is Fun.

ERIC Educational Resources Information Center

Sholtis, MG.

This document provides a guide to various recreational swimming and conditioning programs designed as a means of attaining and maintaining physical fitness through water activities while the body is submerged in water. Part 1, "Swimnastics Theory," discusses the objectives of a swimnastics program, its purpose, and various types of conditioning…

Terminology Manual.

ERIC Educational Resources Information Center

Felber, Helmut

A product of the International Information Center for Terminology (Infoterm), this manual is designed to serve as a reference tool for practitioners active in terminology work and documentation. The manual explores the basic ideas of the Vienna School of Terminology and explains developments in the area of applied computer aided terminography…

RECREATION AND SOCIALIZATION FOR THE BRAIN INJURED CHILD.

ERIC Educational Resources Information Center

GOLUB, RISA S.; GORDON, SOL

DESIGNED FOR PARENTS AND SPECIALISTS PLANNING THERAPEUTICALLY ORIENTED RECREATIONAL AND SOCIALIZATION PROGRAMS FOR BRAIN INJURED CHILDREN, THIS DOCUMENT CONTAINS 13 CHAPTERS BY DIFFERENT AUTHORS. ACTIVITIES DISCUSSED ARE GENERALLY NONCOMPETITIVE, EMPHASIZING STRUCTURE AND LIMIT. DISCUSSED ARE (1) THE ROLE OF THE OPTOMETRIST WITH THE INADEQUATE…

Physics Curriculum Development Project. Aims, Organisation, Activities of PLON: A Physics Curriculum Development Project for General Secondary Education in the Netherlands. Outline.

ERIC Educational Resources Information Center

Utrecht State Univ., (Netherlands).

This document highlights the aims and activities of a project designed to modernize and update physics teaching and physics curriculum in the Netherlands by developing materials for use with students aged 12-18 at intermediate general, higher general, and pre-university schools. Following general information (including a brief description of the…

KC-135 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

Skinner, Noel C.

1999-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the KC-135 from June 20, 1998 to June 20, 1999. Included is a general overview of KC-135 activities manifested and coordinated by the Life Sciences Research Laboratories. A collection of brief reports that describes tests conducted aboard the KC-135 follows the overview. Principal investigators and test engineers contributed significantly to the content of the report describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information concerning the KC-135 and the Reduced-Gravity Program.

KC-135 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

Skinner, Noel C.; Schlegel, Todd T. (Technical Monitor)

2001-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the KC-135 from January to June 15, 2001. Included is a general overview of KC-135 activities manifested and coordinated by the Human Adaptation and Countermeasures Office. A collection of brief reports that describes tests conducted aboard the KC-135 follows the overview. Principal investigators and test engineers contributed significantly to the content of the report describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information concerning the KC-135 and the Reduced-Gravity Program.

Genetic Networks Activated by Blast Injury to the Eye

DTIC Science & Technology

2013-08-01

SUPPLEMENTARY NOTES 14. ABSTRACT Purpose: The present research project is designed to define the overall change in gene expression in the eye...Memphis TN, 38163 REPORT DATE: August 2013 TYPE OF REPORT: Annual Summary PREPARED FOR: U.S. Army Medical Research and Materiel Command...author(s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement Four to Volume Three. Measurement and Evaluation: The Research Services Division.

ERIC Educational Resources Information Center

Coyle, David A.; And Others

One of five supplements which accompany chapter 3 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains a master listing of all Mountain-Plains curriculum, compiled by job title, course, unit, and Learning activity package (LAPS) and arranged…

Standardization and program effect analysis (Study 2.4). Volume 3: Design-to-cost analysis

NASA Technical Reports Server (NTRS)

Shiokari, T.

1975-01-01

The program procedures that were incorporated into an on-going "design-to-cost" spacecraft program are examined. Program procedures are the activities that support the development and operations of the flight unit: contract management, documents, integration meetings, engineering, and testing. This report is limited to the program procedures that were implemented, with emphasis on areas that may depart from normal satellite development practices.

Social Learning Networks: From Data Analytics to Active Sensing

DTIC Science & Technology

2017-10-13

time updating of user models that in turn dictate the learning path of each student . In particular, we have designed , implemented, and evaluated our...decision, unless so designated by other documentation. 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS (ES) U.S. Army Research Office P.O. Box...social network that exists between students , instructors, and modules of learning. Between 2015 and 2017, we completed a variety of data-driven

Cigarette filter ventilation is a defective design because of misleading taste, bigger puffs, and blocked vents.

PubMed

Kozlowski, L T; O'Connor, R J

2002-03-01

To review tobacco industry documents on filter ventilation in light of published studies and to explore the role of filter ventilation in the design of cigarettes that deliver higher smoke yields to smokers than would be expected from standard machine smoked tests (Federal Trade Commission (FTC), International Organization for Standardization (ISO)). Searched from November 1999 to November 2000 internet databases of industry documents (www.pmdocs.com, www.rjrtdocs.com, www.lorillarddocs.com, www.bw.aalatg.com, www.cdc.gov/tobacco/industrydocs, www.tobaccodocuments.org, www.tobaccopapers.org, www.hlth.gov.bc.ca/Guildford, www.cctc.ca/ncth/Guildford, www.cctc.ca/ncth/Guildford2) for documents related to filter ventilation. Documents found dated from 1955 through 1994. Those documents judged to contain the most relevant information or data on filter ventilation related to cigarette taste and compensatory smoking, while also trying to avoid redundancy from various documents deriving from the same underlying data. Filter ventilation is a crucial design feature creating three main problems for lower tar cigarettes as measured by official smoking machine testing. Firstly, it misleadingly makes cigarettes taste lighter and milder, and, therefore, they appear less dangerous to smokers. Secondly, it promotes compensation mainly by facilitating the taking of larger puffs. Thirdly, for very heavily ventilated cigarettes (that is, > 65% filter air dilution), behavioural blocking of vents with lips or fingers is an additional contributor to compensatory smoking. These three effects are found in industry research as well as published research. Filter ventilation is a dangerous, defective technology that should be abandoned in less hazardous nicotine delivery systems. Health interested groups should test cigarettes in a way that reflects compensatory smoking. Lower tar (vented filter) cigarettes should be actively countermarketed.

Adapting Rational Unified Process (RUP) approach in designing a secure e-Tendering model

NASA Astrophysics Data System (ADS)

Mohd, Haslina; Robie, Muhammad Afdhal Muhammad; Baharom, Fauziah; Darus, Norida Muhd; Saip, Mohamed Ali; Yasin, Azman

2016-08-01

e-Tendering is an electronic processing of the tender document via internet and allow tenderer to publish, communicate, access, receive and submit all tender related information and documentation via internet. This study aims to design the e-Tendering system using Rational Unified Process approach. RUP provides a disciplined approach on how to assign tasks and responsibilities within the software development process. RUP has four phases that can assist researchers to adjust the requirements of various projects with different scope, problem and the size of projects. RUP is characterized as a use case driven, architecture centered, iterative and incremental process model. However the scope of this study only focusing on Inception and Elaboration phases as step to develop the model and perform only three of nine workflows (business modeling, requirements, analysis and design). RUP has a strong focus on documents and the activities in the inception and elaboration phases mainly concern the creation of diagrams and writing of textual descriptions. The UML notation and the software program, Star UML are used to support the design of e-Tendering. The e-Tendering design based on the RUP approach can contribute to e-Tendering developers and researchers in e-Tendering domain. In addition, this study also shows that the RUP is one of the best system development methodology that can be used as one of the research methodology in Software Engineering domain related to secured design of any observed application. This methodology has been tested in various studies in certain domains, such as in Simulation-based Decision Support, Security Requirement Engineering, Business Modeling and Secure System Requirement, and so forth. As a conclusion, these studies showed that the RUP one of a good research methodology that can be adapted in any Software Engineering (SE) research domain that required a few artifacts to be generated such as use case modeling, misuse case modeling, activity diagram, and initial class diagram from a list of requirements as identified earlier by the SE researchers

AEDT Software Requirements Documents - Draft

DOT National Transportation Integrated Search

2007-01-25

This software requirements document serves as the basis for designing and testing the Aviation Environmental Design Tool (AEDT) software. The intended audience for this document consists of the following groups: the AEDT designers, developers, and te...

Consolidated Development Objectives Document (CDOD) For MB-60

NASA Technical Reports Server (NTRS)

Greene, William D.

2013-01-01

This document defines the objectives related to liquid rocket engine system development to be undertaken by JAXA in support of the Space Launch System (SLS) Program managed out of the NASA Marshall Space Flight Center (MSFC). These objectives include furnishing the necessary management, labor, facilities, tools, equipment, and materials required to execute the specified activities. 1.1 Project Scope: The scope of this effort is to develop a rocket engine and associated products per the objectives and technical requirements established in this document. This engine, minus the engine controller, designated here as MB ]60, is to be developed through to a prequalification point of maturity. It is assumed that should JCNE ]1 development proceed beyond this maturity point towards actual flight qualification, the engine controller will be supplied and integrated by NASA. 1.2 Document Structure: The structure of this Consolidated Development Objectives Document (CDOD) includes a traditional description of objectives in a SOO, plus the associated Data Products Document (DPD) in an attached appendix, and then Engine Requirements Document (ERD) as another attached appendix. It is the intent that this document, in conjunction with the cited applicable documents, should constitute a complete programmatic and technical description of the development effort to be pursued.

Stratification, Elaboration and Formalisation of Design Documents: Effects on the Production of Instructional Materials

ERIC Educational Resources Information Center

Boot, Eddy W.; Nelson, Jon; van Merrienboer, Jeroen J. G.; Gibbons, Andrew S.

2007-01-01

Designers and producers of instructional materials lack a common design language. As a result, producers have difficulties translating design documents into technical specifications. The 3D-model is introduced to improve the stratification, elaboration and formalisation of design documents. It is hypothesised that producers working with improved…

Preliminary Tritium Management Design Activities at ORNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, Thomas J.; Felde, David K.; Logsdon, Randall J.

2016-09-01

Interest in salt-cooled and salt-fueled reactors has increased over the last decade (Forsberg et al. 2016). Several private companies and universities in the United States, as well as governments in other countries, are developing salt reactor designs and/or technology. Two primary issues for the development and deployment of many salt reactor concepts are (1) the prevention of tritium generation and (2) the management of tritium to prevent release to the environment. In 2016, the US Department of Energy (DOE) initiated a research project under the Advanced Reactor Technology Program to (1) experimentally assess the feasibility of proposed methods for tritiummore » mitigation and (2) to perform an engineering demonstration of the most promising methods. This document describes results from the first year’s efforts to define, design, and build an experimental apparatus to test potential methods for tritium management. These efforts are focused on producing a final design document as the basis for the apparatus and its scheduled completion consistent with available budget and approvals for facility use.« less

The Specific Features of design and process engineering in branch of industrial enterprise

NASA Astrophysics Data System (ADS)

Sosedko, V. V.; Yanishevskaya, A. G.

2017-06-01

Production output of industrial enterprise is organized in debugged working mechanisms at each stage of product’s life cycle from initial design documentation to product and finishing it with utilization. The topic of article is mathematical model of the system design and process engineering in branch of the industrial enterprise, statistical processing of estimated implementation results of developed mathematical model in branch, and demonstration of advantages at application at this enterprise. During the creation of model a data flow about driving of information, orders, details and modules in branch of enterprise groups of divisions were classified. Proceeding from the analysis of divisions activity, a data flow, details and documents the state graph of design and process engineering was constructed, transitions were described and coefficients are appropriated. To each condition of system of the constructed state graph the corresponding limiting state probabilities were defined, and also Kolmogorov’s equations are worked out. When integration of sets of equations of Kolmogorov the state probability of system activity the specified divisions and production as function of time in each instant is defined. On the basis of developed mathematical model of uniform system of designing and process engineering and manufacture, and a state graph by authors statistical processing the application of mathematical model results was carried out, and also advantage at application at this enterprise is shown. Researches on studying of loading services probability of branch and third-party contractors (the orders received from branch within a month) were conducted. The developed mathematical model of system design and process engineering and manufacture can be applied to definition of activity state probability of divisions and manufacture as function of time in each instant that will allow to keep account of loading of performance of work in branches of the enterprise.

Development of Regulatory Documents for Creation (Upgrade) of Physical Protection Systems under the Russian/American MPC&A Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Izmaylov, Alexandr V.; Babkin, Vladimir; Kurov, Valeriy

2009-10-07

The development of new or the upgrade of existing physical protection systems (PPS) for nuclear facilities involves a multi-step and multidimensional process. The process consists of conceptual design, design, and commissioning stages. The activities associated with each of these stages are governed by Russian government and agency regulations. To ensure a uniform approach to development or upgrading of PPS at Russian nuclear facilities, the development of a range of regulatory and methodological documents is necessary. Some issues of PPS development are covered by the regulatory documents developed by Rosatom, as well as other Russian agencies with nuclear facilities under theirmore » control. This regulatory development has been accomplished as part of the U.S.-Russian MPC&A cooperation or independently by the Russian Federation. While regulatory coverage is extensive, there are a number of issues such as vulnerability analysis, effectiveness assessment, upgrading PPS, and protection of information systems for PPS that require additional regulations be developed. This paper reports on the status of regulatory coverage for PPS development or upgrade, and outlines a new approach to regulatory document development. It describes the evolutionary process of regulatory development through experience gained in the design, development and implementation of PPS as well as experience gained through the cooperative efforts of Russian and U.S. experts involved the development of MPC&A regulations.« less

78 FR 54896 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services [Document...; Title of Information Collection: Conditions of Certification for Rural Health Clinics; Use: The Rural Health Clinic (RHC) conditions of certification are based on criteria prescribed in law and are designed...

Certified Nurses' Aide Job-Related Curriculum.

ERIC Educational Resources Information Center

Massachusetts Career Development Inst., Springfield.

This document, which is designed for students preparing to become a certified nurses' aide, contains instructional text and learning activities organized in nine sections. The following topics are covered: the role of the certified nurse's aide (job duties, personal health, professionalism, code of ethics); infection control (the infection…

Aspirational Model Teaching Criteria for Psychology

ERIC Educational Resources Information Center

Richmond, Aaron S.; Boysen, Guy A.; Gurung, Regan A. R.; Tazeau, Yvette N.; Meyers, Steven A.; Sciutto, Mark J.

2014-01-01

In 2011, the Society for the Teaching of Psychology commissioned a presidential task force to document teaching criteria for model psychology teachers in undergraduate education. The resulting list of criteria reflects activities related to face-to-face course interaction and online teaching, training, and education; course design; implementation…

46 CFR 221.11 - Required approvals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... operated, if the vessel has been designed and built and will be operated for one or more of the following... ACTIVITIES REGULATED TRANSACTIONS INVOLVING DOCUMENTED VESSELS AND OTHER MARITIME INTERESTS Transfers to... approval of the Maritime Administrator: (1) Sell, lease, charter, deliver, or in any manner Transfer to a...

Enhancing the Pharmacokinetic Profile of Protein-Based Drugs

DTIC Science & Technology

2014-06-12

policy or decision, unless so designated by other documentation. 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS (ES) U.S. Army Research Office P.O...activated carrier. The reactions were deglycosylated, desalted by ZipTip, and submitted for MALDI-TOF MS analysis. The 0 equivalent control reaction

Parent News Offline, 2000.

ERIC Educational Resources Information Center

Robertson, Anne S., Ed.

2000-01-01

This document is comprised of the two issues in volume 2 of "Parent News Offline," a publication of the National Parent Information Network (NPIN) designed to introduce those without Internet access to the activities and information available through NPIN. The Spring 2000 issue contains the following articles: (1) "'Zero Tolerance':…

Modular Integrated Stackable Layers (MISL) MI_MSP430A Board Design Document (BDD)

NASA Technical Reports Server (NTRS)

Yim, Hester

2013-01-01

This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.

Einstein's creative thinking and the general theory of relativity: a documented report.

PubMed

Rothenberg, A

1979-01-01

A document written by Albert Einstein has recently come to light in which the eminent scientist described the actual sequence of his thoughts leading to the development of the general theory of relativity. The key creative thought was an instance of a type of creative cognition the author has previously designated "Janusian thinking," Janusian thinking consists of actively conceiving two or more opposite or antithetical concepts, ideas, or images simultaneously. This form of high-level secondary process cognition has been found to operate widely in art, science, and other fields.

JSC Design and Procedural Standards, JSC-STD-8080

NASA Technical Reports Server (NTRS)

Punch, Danny T.

2011-01-01

This document provides design and procedural requirements appropriate for inclusion in specifications for any human spaceflight program, project, spacecraft, system, or end item. The term "spacecraft" as used in the standards includes launch vehicles, orbital vehicles, non-terrestrial surface vehicles, and modules. The standards are developed and maintained as directed by Johnson Space Center (JSC) Policy Directive JPD 8080.2, JSC Design and Procedural Standards for Human Space Flight Equipment. The Design and Procedural Standards contained in this manual represent human spacecraft design and operational knowledge applicable to a wide range of spaceflight activities. These standards are imposed on JSC human spaceflight equipment through JPD 8080.2. Designers shall comply with all design standards applicable to their design effort.

Parametric Study of Variable Emissivity Radiator Surfaces

NASA Technical Reports Server (NTRS)

Grob, Lisa M.; Swanson, Theodore D.

2000-01-01

The goal of spacecraft thermal design is to accommodate a high function satellite in a low weight and real estate package. The extreme environments that the satellite is exposed during its orbit are handled using passive and active control techniques. Heritage passive heat rejection designs are sized for the hot conditions and augmented for the cold end with heaters. The active heat rejection designs to date are heavy, expensive and/or complex. Incorporating an active radiator into the design that is lighter, cheaper and more simplistic will allow designers to meet the previously stated goal of thermal spacecraft design Varying the radiator's surface properties without changing the radiating area (as with VCHP), or changing the radiators' views (traditional louvers) is the objective of the variable emissivity (vary-e) radiator technologies. A parametric evaluation of the thermal performance of three such technologies is documented in this paper. Comparisons of the Micro-Electromechanical Systems (MEMS), Electrochromics, and Electrophoretics radiators to conventional radiators, both passive and active are quantified herein. With some noted limitations, the vary-e radiator surfaces provide significant advantages over traditional radiators and a promising alternative design technique for future spacecraft thermal systems.

The Software Design Document: More than a User's Manual.

ERIC Educational Resources Information Center

Bowers, Dennis

1989-01-01

Discusses the value of creating design documentation for computer software so that it may serve as a model for similar design efforts. Components of the software design document are described, including program flowcharts, graphic representation of screen displays, storyboards, and evaluation procedures. An example is given using HyperCard. (three…

Software engineering for ESO's VLT project

NASA Astrophysics Data System (ADS)

Filippi, G.

1994-12-01

This paper reports on the experience at the European Southern Observatory on the application of software engineering techniques to a 200 man-year control software project for the Very Large Telescope (VLT). This shall provide astronomers, before the end of the century, with one of the most powerful telescopes in the world. From the definition of the general model, described in the software management plan, specific activities have been and will be defined: standards for documents and for code development, design approach using a CASE tool, the process of reviewing both documentation and code, quality assurance, test strategy, etc. The initial choices, the current implementation and the future planned activities are presented and, where feedback is already available, pros and cons are discussed.

Nondiscrimination on the Basis of Handicap in Programs and Activities Receiving or Benefiting from Federal Financial Assistance. Federal Register. Part VI.

ERIC Educational Resources Information Center

Federal Register, 1979

1979-01-01

The document presents the text of a proposed addition (Part 15b) to the rules and regulations of the United States Department of Agriculture, designed to eliminate discrimination on the basis of handicap in any of its programs or activities. Intended to implement Section 504 of the Rehabilitation Act of 1973, Part 15b is subdivided into six…

Constellation Program (CxP) Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) Independent Design Reliability Assessment. Volume 1

NASA Technical Reports Server (NTRS)

Kelly, Michael J.

2010-01-01

This report documents the activities, findings, and NASA Engineering and Safety Center (NESC) recommendations of a multidiscipline team to independently assess the Constellation Program (CxP) Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS). This assessment occurred during a period of 15 noncontiguous months between December 2008 and April 2010, prior to the CPAS Project's Preliminary Design Review (PDR) in August 2010.

Oak Ridge TNS Program: system description manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, R.L.; Becraft, W.R.; Brown, T.G.

1979-05-01

This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.

A verification procedure for MSC/NASTRAN Finite Element Models

NASA Technical Reports Server (NTRS)

Stockwell, Alan E.

1995-01-01

Finite Element Models (FEM's) are used in the design and analysis of aircraft to mathematically describe the airframe structure for such diverse tasks as flutter analysis and actively controlled landing gear design. FEM's are used to model the entire airplane as well as airframe components. The purpose of this document is to describe recommended methods for verifying the quality of the FEM's and to specify a step-by-step procedure for implementing the methods.

Making the "Minority" Voice Heard: Critical Communication Pedagogy and Dissent

ERIC Educational Resources Information Center

Lawless, Brandi

2018-01-01

Courses: Intercultural Communication, Argumentation and Advocacy, Communication and Education. Objectives: This activity is designed to help students to problem-pose and think critically about policies/laws that influence education. Students will be exposed to U.S. policy and will be able to articulate a critical dissent of such documents.

Pump Operation Workshop.

ERIC Educational Resources Information Center

Ontario Ministry of the Environment, Toronto.

This manual was developed for use at workshops designed as an extension of training for water and wastewater treatment personnel. The course consists of lecture-discussions and hands-on activities. Each of the lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that…

I'm Positive: Growing Up with Self-Esteem.

ERIC Educational Resources Information Center

Kansas State Univ., Manhattan. Cooperative Extension Service.

This document presents "I'm Positive: Growing Up With Self-Esteem," an informal, personal study course designed to strengthen the reader's ability to nurture self-esteem in children from birth through adolescence. Special emphasis is given to four parenting skills: acceptance, encouragement, empowerment, and love. Weekly activities are provided…

Accident Report: Pupils -- Employees, School Jurisdiction, 1972-1973.

ERIC Educational Resources Information Center

O'Hara, James M., Comp.; Conklin, Robert L., Comp.

This report is intended to provide principals, department heads, teachers, and parents with specific information designed to assist them in isolating unsafe conditions, activities, and behavioral problems. The document is divided into three parts: (1) a pupil section, with tables showing where accidents occurred, what parts of the body were…

The New Youth Entrepreneur: Money To Get Started. Module 5.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the fifth module, and introduces students to the financial issues involved in starting a business,…

Boater Performance Course Resource Manual.

ERIC Educational Resources Information Center

Davis, Michael W.; Reichle, Marvin N.

Designed to serve as the primary resource material for instructors and students participating in the Boater Performance Program, this manual is one of three documents prepared for the course, which teaches the skills essential for safe boating behavior in all recreational boating activities. Information deals with all phases of boat operation and…

Murder They Wrote. A Cross-Curricular Cooperative Learning Experience.

ERIC Educational Resources Information Center

Gaither, Linda

This document contains a cross-curricular cooperative learning experience that is designed to give high school students career and technical educational experiences in the areas of forensic sciences and criminalistics by doing the forensic work to "solve" a fictitious murder. The activities included in the cooperative learning experience…

Contemporary Issues in Science. Implementation Manual.

ERIC Educational Resources Information Center

Staten Island Continuum of Education, NY.

Contemporary Issues in Science Program (CIIS) is designed to provide teachers and students with the necessary tools and strategies for bringing contemporary scientific issues into the classroom. Provided in this document are discussions of the three major elements in the program, support elements, and major activities. Major elements include the…

Assist Program 1: The Moderately/Severely Handicapped. Sourcebook. ASSIST: Associate Instructional Support for Teachers.

ERIC Educational Resources Information Center

Brantlinger, Ellen; And Others

The first of two documents designed to provide training for paraprofessionals working with moderately and severely/profoundly handicapped students, the sourcebook provides information on preservice and inservice education. Narrative is presented and activities are described for the following preservice topics (sample subtopics in parentheses):…

The Art of Active Listening.

ERIC Educational Resources Information Center

Mercer County Community Coll., Trenton, NJ.

This document is one of a series of student workbooks developed for workplace skill development courses or workshops by Mercer County Community College (New Jersey) and its partners. Designed to help employees empathize with others' points of view, the course is intended to teach employees to listen effectively, ask the right questions, and give…

Economic Education. Curriculum Guide. Kindergarten-12. Revised Edition.

ERIC Educational Resources Information Center

Oklahoma Curriculum Improvement Commission, Oklahoma City.

The document offers practical and motivating techniques for helping students achieve economic literacy. The activities are designed to develop competency for effective citizenship as a consumer, a worker making occupational choices, and a voter on socioeconomic issues. The material in the elementary section discusses economic wants, scarcity and…

Activated Sludge Process Workshop Manual.

ERIC Educational Resources Information Center

Ontario Ministry of the Environment, Toronto.

This manual was developed for use at workshops designed to upgrade the knowledge of experienced wastewater treatment plant operators. Each of the lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in this manual include: types and factors…

Badger History, Vol. 29, No. 3, January 1976. Wisconsin Geography.

ERIC Educational Resources Information Center

Kanetzke, Howard W., Ed.

This document focuses on the physical environment of Wisconsin and describes how movement of glaciers during the Ice Ages formed Wisconsin's present topography. The journal contains short reading selections, stories, word lists, and activities designed to help elementary school students understand the causes and effects of glacial drift. Nine…

Social Skills Training: A Three-Pronged Approach for Developmentally Disabled Adolescents and Young Adults.

ERIC Educational Resources Information Center

Coyne, Phyllis

The document is designed to provide practical information for teachers, parents, group home workers, work activity personnel, and others interested in developing social interaction skills and appropriate social behaviors in developmentally disabled adolescents and young adults. An introductory section discusses social problems of the…

Increasing On-Task Behavior through Motivational Activities

ERIC Educational Resources Information Center

Lantz, Christine; McKenna, Barbara; Price, Brianne; Stralow, Duane

2007-01-01

This report describes a program designed to increase students' on-task behavior. The students in the sample population consisted of kindergarten, first, and fifth graders. These classrooms are located in a community in northern Illinois. The problem of student behavior adversely affecting on-task behavior was well documented through a review of…

Planning and Implementing the Daily Routine in Slovene Kindergartens and Reggio Emilia Concept

ERIC Educational Resources Information Center

Bercnik, Sanja; Devjak, Tatjana

2012-01-01

Authors in this paper present the design and implementation of daily routines in Slovenian kindergartens. Slovenian national document for preschool education, "Curriculum for Kindergartens" (1999), describes daily kindergarten activities (communication and interaction with and among children, use of compliment and reprehension, and rules…

Math and Beyond.

ERIC Educational Resources Information Center

Solana Beach Elementary School District, CA.

THE FOLLOWING IS THE FULL TEXT OF THIS DOCUMENT: MATH AND BEYOND is a schoolwide math incentive program designed to encourage students--and their parents--to investigate and explore the world of mathematics beyond those experiences provided during the school day. The program focuses on experiences and activities in seven different areas of math:…

MARA: Mathematics/Architecture Related Activities.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Curriculum Development.

This document is designed primarily to help teachers in elementary and middle schools to teach basic skills in mathematics, the visual arts, and social interaction. The Introduction contains sections titled: (1) How and Where to Begin; (2) Orientation Exercises; (3) Discovering the Environment; (4) Toothpicks and Gumdrops; (5) A Process for the…

Cycles for Science: Curriculum Supplement for Chemistry (Grades 9-12).

ERIC Educational Resources Information Center

Rogers, Diana, Ed.

This document was developed in cooperation with secondary teachers and solid waste management professionals. The goal is to integrate steel recycling, natural resource conservation, and solid waste management into science learning. Basic concepts from the following chemistry units have been used to design the lessons and activities: transition…

Life Between the Grains of Sand: An Introductory Activity for Beginning Marine Education Students.

ERIC Educational Resources Information Center

Schlenker, Richard M.

This document presents the outline of a marine biology science unit designed to introduce students to the study and collection of organisms living in the intertidal zone. Details pertaining to the collection of interstitial organisms and a six-item quiz are included. (SL)

Accommodating Student Differences: A Resource for Teaching Gifted and Talented Children.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Education Response Centre.

This document presents a selection of teacher designed activities to help meet the needs of gifted and talented students. The four teaching units focus on creativity, independent study, critical thinking, and communication skills. Introductory material explains how the teachers of Parkland County (Alberta) worked together in informal and…

Upgrading in an Industrial Setting. Final Report.

ERIC Educational Resources Information Center

Russell, Wendell

The project objectives were: (1) to assess existing industrial upgrading practices in an Atomic Energy Commission contractor organization, (2) to design new alternative upgrading methods, (3) to experiment with new upgrading methods, (4) to plan for utilization of proven upgrading programs, and (5) to document and disseminate activities. A twelve…

Filmmaking for Children.

ERIC Educational Resources Information Center

Rynew, Arden

Filmmaking, when used to structure the activities of an art program, can become a tool to enrich the educational environment, to detect and observe all types of physical phenomena, and to extend the limits of observation. Designed to stimulate filmmaking in the elementary school, this handbook documents an approach to adding filmmaking to a…

The New Youth Entrepreneur: Types of Business Ownership. Module 7.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the seventh module, and examines the potential advantages and disadvantages of entering into four…

Educational Forum: A Journal of Teaching, Learning & Professional Development, Spring 1992.

ERIC Educational Resources Information Center

Fideler, Elizabeth F., Ed.

1992-01-01

Designed to promote discourse on teaching, learning, and professional development, this spring 1992 issue of Massachusetts Bay Community College's (MBCC's) "Educational Forum" documents modes of inquiry and faculty development activities that MBCC has found promising. The following articles are contained in the issue: (1) "Education Through…

7 CFR 1485.16 - Reimbursement rules.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the limitation that CCC will not reimburse more than $1.00 per item; (11) The design and production of... the MAP participant shall document by a salary survey or other means. (4) A retroactive salary... participants for MAP activities or for travel of non-MAP participant personnel; (16) Market research; (17...

Custom Sewing, Modules One, Two, and Three. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This document consists of three modules designed for a custom apparel and garment sewing program teaching students to construct, alter, and prepare garments and home fashions to customer specifications. Each module includes some or all of the following components: performance objectives, lesson plans, suggested activities, information sheets,…

Basic Water Treatment Operation.

ERIC Educational Resources Information Center

Ontario Ministry of the Environment, Toronto.

This manual was developed for use at workshops designed to introduce the fundamentals of water treatment plant operations. The course consists of lecture-discussions and hands-on activities. Each of the fourteen lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that…

The Consumer Experience (First Offering). Course Evaluation Report.

ERIC Educational Resources Information Center

Aversa, Frances M.

This report documents the conduct and results of activities to evaluate the first offering of The Consumer Experience to adult learners through the State University of Nebraska (SUN). A project of the University of Nebraska, SUN is a nontraditional, open learning program designed to extend postsecondary educational opportunities to persons who…

Look into Waste.

ERIC Educational Resources Information Center

Undy, Harry, Ed.

This booklet is designed to help British teachers introduce concepts of waste to secondary school students. The document focuses on various types of waste and pollution--air, land, water, and industrial--and suggests activities to help students understand and combat waste of natural and human resources. It is presented in 11 chapters. Six chapters…

Ada Structure Design Language (ASDL)

NASA Technical Reports Server (NTRS)

Chedrawi, Lutfi

1986-01-01

An artist acquires all the necessary tools before painting a scene. In the same analogy, a software engineer needs the necessary tools to provide their design with the proper means for implementation. Ada provide these tools. Yet, as an artist's painting needs a brochure to accompany it for further explanation of the scene, an Ada design also needs a document along with it to show the design in its detailed structure and hierarchical order. Ada could be self-explanatory in small programs not exceeding fifty lines of code in length. But, in a large environment, ranging from thousands of lines and above, Ada programs need to be well documented to be preserved and maintained. The language used to specify an Ada document is called Ada Structure Design Language (ASDL). This language sets some rules to help derive a well formatted Ada detailed design document. The rules are defined to meet the needs of a project manager, a maintenance team, a programmer and a systems designer. The design document templates, the document extractor, and the rules set forth by the ASDL are explained in detail.

Ascent/Descent Software

NASA Technical Reports Server (NTRS)

Brown, Charles; Andrew, Robert; Roe, Scott; Frye, Ronald; Harvey, Michael; Vu, Tuan; Balachandran, Krishnaiyer; Bly, Ben

2012-01-01

The Ascent/Descent Software Suite has been used to support a variety of NASA Shuttle Program mission planning and analysis activities, such as range safety, on the Integrated Planning System (IPS) platform. The Ascent/Descent Software Suite, containing Ascent Flight Design (ASC)/Descent Flight Design (DESC) Configuration items (Cis), lifecycle documents, and data files used for shuttle ascent and entry modeling analysis and mission design, resides on IPS/Linux workstations. A list of tools in Navigation (NAV)/Prop Software Suite represents tool versions established during or after the IPS Equipment Rehost-3 project.

Human computer interface guide, revision A

NASA Technical Reports Server (NTRS)

1993-01-01

The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

Deep Borehole Field Test Requirements and Controlled Assumptions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest

2015-07-01

This document presents design requirements and controlled assumptions intended for use in the engineering development and testing of: 1) prototype packages for radioactive waste disposal in deep boreholes; 2) a waste package surface handling system; and 3) a subsurface system for emplacing and retrieving packages in deep boreholes. Engineering development and testing is being performed as part of the Deep Borehole Field Test (DBFT; SNL 2014a). This document presents parallel sets of requirements for a waste disposal system and for the DBFT, showing the close relationship. In addition to design, it will also inform planning for drilling, construction, and scientificmore » characterization activities for the DBFT. The information presented here follows typical preparations for engineering design. It includes functional and operating requirements for handling and emplacement/retrieval equipment, waste package design and emplacement requirements, borehole construction requirements, sealing requirements, and performance criteria. Assumptions are included where they could impact engineering design. Design solutions are avoided in the requirements discussion. Deep Borehole Field Test Requirements and Controlled Assumptions July 21, 2015 iv ACKNOWLEDGEMENTS This set of requirements and assumptions has benefited greatly from reviews by Gordon Appel, Geoff Freeze, Kris Kuhlman, Bob MacKinnon, Steve Pye, David Sassani, Dave Sevougian, and Jiann Su.« less

Different Aspects of Research on Standardization

DTIC Science & Technology

1994-11-01

in different organisational units. (Figure 9) Now it is possible to allocate documents to activities. For this purpose a distinction is made between...the past is documented by an activity matrix and with the allocation document’s activities. As far as the future is concerned, the tables include what...guidelines etc. - Working documents * All documents are related to one or: more activities. * If all allocations document-activity were made, the whole

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

Survey of alternative gas turbine engine and cycle design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lukas, H.

1986-02-01

In the period of the 1940's to 1960's much experimentation was performed in the areas of intercooling, reheat, and recuperation, as well as the use of low-grade fuels in gas turbines. The Electric Power Research Institute (EPRI), in an effort to document past experience which can be used as the basis for current design activities, commissioned a study to document alternate cycles and components used in gas turbine design. The study was performed by obtaining the important technical and operational criteria of the cycles through a literature search of published documents, articles, and papers. Where possible the information was augmentedmore » through dialogue with persons associated with those cycles and with the manufacturers. The survey indicated that many different variations of the simple open-cycle gas turbine plant were used. Many of these changes resulted in increases in efficiency over the low simple-cycle efficiency of that period. Metallurgy, as well as compressor and turbine design, limited the simple-cycle efficiency to the upper teens. The cycle modifications increased those efficiencies to the twenties and thirties. Advances in metallurgy as well as compressor and turbine design, coupled with the decrease in flue cost, stopped the development of these complex cycles. Many of the plants operated successfully for many years, and only because newer simple-cycle gas turbine plants and large steam plants had better heat rates were these units shutdown or put into stand-by service. 24 refs., 25 figs., 114 tabs.« less

TransGuide : model deployment initiative design report

DOT National Transportation Integrated Search

1998-09-01

This report documents the high-level design of the TransGuide MDI project and discusses the design trade-off decisions. A detailed, specific project level design is provided in each projects System Design document.

Waste Package Component Design Methodology Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.C. Mecham

2004-07-12

This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and usemore » of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety and operational requirements of the YMP. Four waste package configurations have been selected to illustrate the application of the methodology during the licensing process. These four configurations are the 21-pressurized water reactor absorber plate waste package (21-PWRAP), the 44-boiling water reactor waste package (44-BWR), the 5 defense high-level radioactive waste (HLW) DOE spent nuclear fuel (SNF) codisposal short waste package (5-DHLWDOE SNF Short), and the naval canistered SNF long waste package (Naval SNF Long). Design work for the other six waste packages will be completed at a later date using the same design methodology. These include the 24-boiling water reactor waste package (24-BWR), the 21-pressurized water reactor control rod waste package (21-PWRCR), the 12-pressurized water reactor waste package (12-PWR), the 5 defense HLW DOE SNF codisposal long waste package (5-DHLWDOE SNF Long), the 2 defense HLW DOE SNF codisposal waste package (2-MC012-DHLW), and the naval canistered SNF short waste package (Naval SNF Short). This report is only part of the complete design description. Other reports related to the design include the design reports, the waste package system description documents, manufacturing specifications, and numerous documents for the many detailed calculations. The relationships between this report and other design documents are shown in Figure 1.« less

STS-60 Space Shuttle mission report

NASA Technical Reports Server (NTRS)

Fricke, Robert W., Jr.

1994-01-01

The STS-60 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the sixtieth flight of the Space Shuttle Program and eighteenth flight of the Orbiter vehicle Discovery (OV-103). In addition to the Orbiter, the flight vehicle consisted of an ET designated at ET-61 (Block 10); three SSME's which were designated as serial numbers 2012, 2034, and 2032 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-062. The RSRM's that were installed in each SRB were designated as 360L035A (lightweight) for the left SRB, and 360Q035B (quarterweight) for the right SRB. This STS-60 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume VIII, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objectives of the STS-60 mission were to deploy and retrieve the Wake Shield Facility-1 (WSF-1), and to activate the Spacehab-2 payload and perform on-orbit experiments. Secondary objectives of this flight were to activate and command the Capillary Pumped Loop/Orbital Debris Radar Calibration Spheres/Breman Satellite Experiment/Getaway Special (GAS) Bridge Assembly (CAPL/ODERACS/BREMSAT/GBA) payload, the Auroral Photography Experiment-B (APE-B), and the Shuttle Amateur Radio Experiment-II (SAREX-II).

Warfighting Concepts to Future Weapon System Designs (WARCON)

DTIC Science & Technology

2003-09-12

34* Software design documents rise to litigation. "* A Material List "Cost information that may support, or may * Final Engineering Process Maps be...document may include design the system as derived from the engineering design, software development, SRD. MTS Technologies, Inc. 26 FOR OFFICIAL USE...document, early in the development phase. It is software engineers produce the vision of important to establish a standard, formal the design effort. As

Safeguards Guidance Document for Designers of Commercial Nuclear Facilities: International Nuclear Safeguards Requirements and Practices For Uranium Enrichment Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert Bean; Casey Durst

2009-10-01

This report is the second in a series of guidelines on international safeguards requirements and practices, prepared expressly for the designers of nuclear facilities. The first document in this series is the description of generic international nuclear safeguards requirements pertaining to all types of facilities. These requirements should be understood and considered at the earliest stages of facility design as part of a new process called “Safeguards-by-Design.” This will help eliminate the costly retrofit of facilities that has occurred in the past to accommodate nuclear safeguards verification activities. The following summarizes the requirements for international nuclear safeguards implementation at enrichmentmore » plants, prepared under the Safeguards by Design project, and funded by the U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA), Office of NA-243. The purpose of this is to provide designers of nuclear facilities around the world with a simplified set of design requirements and the most common practices for meeting them. The foundation for these requirements is the international safeguards agreement between the country and the International Atomic Energy Agency (IAEA), pursuant to the Treaty on the Non-proliferation of Nuclear Weapons (NPT). Relevant safeguards requirements are also cited from the Safeguards Criteria for inspecting enrichment plants, found in the IAEA Safeguards Manual, Part SMC-8. IAEA definitions and terms are based on the IAEA Safeguards Glossary, published in 2002. The most current specification for safeguards measurement accuracy is found in the IAEA document STR-327, “International Target Values 2000 for Measurement Uncertainties in Safeguarding Nuclear Materials,” published in 2001. For this guide to be easier for the designer to use, the requirements have been restated in plainer language per expert interpretation using the source documents noted. The safeguards agreement is fundamentally a legal document. As such, it is written in a legalese that is understood by specialists in international law and treaties, but not by most outside of this field, including designers of nuclear facilities. For this reason, many of the requirements have been simplified and restated. However, in all cases, the relevant source document and passage is noted so that readers may trace the requirement to the source. This is a helpful living guide, since some of these requirements are subject to revision over time. More importantly, the practices by which the requirements are met are continuously modernized by the IAEA and nuclear facility operators to improve not only the effectiveness of international nuclear safeguards, but also the efficiency. As these improvements are made, the following guidelines should be updated and revised accordingly.« less

BACT Simulation User Guide (Version 7.0)

NASA Technical Reports Server (NTRS)

Waszak, Martin R.

1997-01-01

This report documents the structure and operation of a simulation model of the Benchmark Active Control Technology (BACT) Wind-Tunnel Model. The BACT system was designed, built, and tested at NASA Langley Research Center as part of the Benchmark Models Program and was developed to perform wind-tunnel experiments to obtain benchmark quality data to validate computational fluid dynamics and computational aeroelasticity codes, to verify the accuracy of current aeroservoelasticity design and analysis tools, and to provide an active controls testbed for evaluating new and innovative control algorithms for flutter suppression and gust load alleviation. The BACT system has been especially valuable as a control system testbed.

Department of Defense Federal Supply Classification Listing of DoD standardization Documents

DTIC Science & Technology

1989-07-01

military activities . This mandatory provision requires that the Federal and Military specifications, standards, and related standardization documents be...fiche as follows: a. DODISS Alphabetic Listing - Reflects all active documents alphabetically by nomenclature cross referenced to document number...document date, preparing activity and custodians. b. DODISS Numerical Listing - Reflects all active documents. New, revised, amended, changed and

Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honma, George

The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will bemore » used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).« less

Maintainability Program Requirements for Space Systems

NASA Technical Reports Server (NTRS)

1987-01-01

This document is established to provide common general requirements for all NASA programs to: design maintainability into all systems where maintenance is a factor in system operation and mission success; and ensure that maintainability characteristics are developed through the systems engineering process. These requirements are not new. Design for ease of maintenance and minimization of repair time have always been fundamental requirements of the systems engineering process. However, new or reusable orbital manned and in-flight maintainable unmanned space systems demand special emphasis on maintainability, and this document has been prepared to meet that need. Maintainability requirements on many NASA programs differ in phasing and task emphasis from requirements promulgated by other Government agencies. This difference is due to the research and development nature of NASA programs where quantities produced are generally small; therefore, the depth of logistics support typical of many programs is generally not warranted. The cost of excessive maintenance is very high due to the logistics problems associated with the space environment. The ability to provide timely maintenance often involves safety considerations for manned space flight applications. This document represents a basic set of requirements that will achieve a design for maintenance. These requirements are directed primarily at manned and unmanned orbital space systems. To be effective, maintainability requirements should be tailored to meet specific NASA program and project needs and constraints. NASA activities shall invoke the requirements of this document consistent with program planning in procurements or on inhouse development efforts.

The New Youth Entrepreneur: Records and Books. Did You Make Any Money? Module 9.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the ninth module, and introduces students to recordkeeping and bookkeeping strategies essential for…

A Revised Guide for Improving Teacher Education in Human Rights.

ERIC Educational Resources Information Center

Phi Delta Kappa, Bloomington, IN. Commission of Education, Human Rights, and Responsibilities.

This document serves as a guide for teacher education institutions and programs designed to prepare educators for meeting their responsibilities in the area of human rights and human relations. This second edition of the guide represents a substantial modification of the original guide, and includes many activities, experiences, and suggestions…

Tolerance for Diversity of Beliefs: A Secondary Curriculum Unit.

ERIC Educational Resources Information Center

Avery, Patricia; And Others

This document consists on a 6-week curriculum unit designed to allow secondary students to actively explore issues associated with freedom of belief and expression. Throughout the curriculum students systematically examine the ways in which the legal and constitutional framework of our society directly embodies the norms of freedom of speech and…

Anaerobic Digestion. Selected Instructional Activities and References. Instructional Resources Monograph Series.

ERIC Educational Resources Information Center

Townsend, Robert D., Comp.

Focusing specifically on the wastewater treatment process of anaerobic digestion, this document identifies instructional and reference materials for use by professionals in the field in the development and implementation of new programs or in the updating of existing programs. It is designed to help trainers, plant operators, educators, engineers,…

How To Celebrate National Women's History Month.

ERIC Educational Resources Information Center

Stern, Majorie

Intended for teachers, this guide is designed as an aid to mark Women's History Month with special thought and activity, and to offer suggestions for further information and resources. Noting that "history doesn't only happen to men," the document stresses that "history is made at home, in the community, in the factories, offices,…

MAP Markers: Research and Evaluation of the Mutual Agreement Program. Resource Document No. 5.

ERIC Educational Resources Information Center

Robison, James O.

This report is an evaluation, using randomized experimental/control design, of a program involving negotiated contractual agreements (MAP) between prisoners and parole boards for specific parole dates contingent on performance in work, training and treatment activities. Contracts were generally for less than six months. Both feasibility and…

Boater Performance Course Curriculum Outline.

ERIC Educational Resources Information Center

Davis, Michael W.; Reichle, Marvin N.

One of three related documents on recreational boating, this curriculum outline presents units of study designed to provide the knowledge, attitudes, and skills essential for safe boating behavior in all recreational boating activities. Fourteen units of study cover all phases of boat operation and are geared to the 15- or 16-foot power boat--the…

Visions: The Newsletter of the National Preschool Coordination Project, 1991.

ERIC Educational Resources Information Center

Visions, 1991

1991-01-01

This document consists of all five issues of the first volume of a newsletter designed to provide information and resources to help preschool educators more effectively serve migrant children and their parents. The newsletter also provides migrant children and their parents with learning suggestions and activities. Each issue contains information…

The Statue of Liberty Deed of Presentation.

ERIC Educational Resources Information Center

Schamel, Wynell Burroughs; Blondo, Richard A.

1992-01-01

Presents a history lesson based on the deed of presentation for the Statue of Liberty. Discusses the conception and history of the statue and its presentation to the United States as a gift from the people of France. Includes a copy of the document, topics for class discussion, and research, writing, and design activities. (DK)

Creating Success! A Program for Behaviorally and Academically At-Risk Children.

ERIC Educational Resources Information Center

Akin, Terri; And Others

This document presents a program designed especially for behaviorally and academically at-risk children in kindergarten through sixth grade. It includes a collection of experiential activities that provides ways to infuse the elements of success into the regular classroom curriculum. Eight developmental areas are targeted: (1) expressing feelings;…

Effective Mathematics Teaching: Remediation Strategies: Grades K-5.

ERIC Educational Resources Information Center

Clayton, Gypsy Abbott; And Others

This handbook is intended to contribute to the development of a theory of remedial instruction that can be easily understood and assimilated by teachers. The document evolved from research and workshop activity over a period of several years. It is designed for use by those with instructional or supervisory reponsibilities in elementary schools,…

Coordinated Strategies to Help the Whole Child: Examining the Contributions of Full-Service Community Schools

ERIC Educational Resources Information Center

Biag, Manuelito; Castrechini, Sebastian

2016-01-01

Full-service community schools are designed to increase students, and families' access to comprehensive and coordinated supports, services, and programs such as medical care, food aid, and enrichment activities. Despite widespread support, the research base documenting the efficacy of community schools is still emerging. Analyzing longitudinal…

National Task Force on Student Aid Problems. Final Report.

ERIC Educational Resources Information Center

1975

This document presents a full discussion of the activities, findings, and recommendations of the National Task Force on Student Aid Problems. The task force was a voluntary association of concerned and interested agencies and organizations. Its only standing came from the support of those directly concerned with student aid problems. By design and…

Productivity and Capital Goods.

ERIC Educational Resources Information Center

Zicht, Barbara, Ed.; And Others

1981-01-01

Providing teacher background on the concepts of productivity and capital goods, this document presents 3 teaching units about these ideas for different grade levels. The grade K-2 unit, "How Do They Do It?," is designed to provide students with an understanding of how physical capital goods add to productivity. Activities include a field trip to…

The Arms Race and World Hunger. Facts for Action #4.

ERIC Educational Resources Information Center

Phillips, Jim

Designed for high school global education classes, this document examines ways in which the arms race affects the poor. Military expenditures and foreign economic aid of the developed nations are compared with survival needs of developing nations. Statistics support five premises: the arms race (1) diverts resources from productive activity and…

Recommended Practice on Lighting for Educational Facilities.

ERIC Educational Resources Information Center

Illuminating Engineering Society, New York, NY.

The aims of this document are: (1) to enable school and college administrators to brief their architects on appropriate provision of lighting, and (2) to enable lighting designers to check that the criteria they apply are consistent with good current practice. The scope is restricted to learning and study activities and associated circulation.…

The New Youth Entrepreneur: How To Mind Your Own Business. Module 11.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the eleventh module, and focuses on issues related to managing the day-to-day affairs of a small…

Reframing Research on Methods Courses to Inform Mathematics Teacher Educators' Practice

ERIC Educational Resources Information Center

Kastberg, Signe E.; Tyminski, Andrew M.; Sanchez, Wendy B.

2017-01-01

Calls have been made for the creation of a shared knowledge base in mathematics teacher education with the power to inform the design of scholarly inquiry and mathematics teacher educators' (MTEs) scholarly practices. Focusing on mathematics methods courses, we summarize and contribute to literature documenting activities MTEs use in mathematics…

Professional Development for Adult Education Instructors. State Policy Update.

ERIC Educational Resources Information Center

Tolbert, Michelle

This State Policy Update provides background on professional development (PD) in adult education. Section 2 describes survey methods used to document how states funded and designed their PD systems. Section 3 reviews data collected by the survey of state PD systems, highlighting PD activities in Kentucky, New York, Oregon, and Tennessee. It…

An Experience-Centered Curriculum: Exercises in Perception, Communication and Action. Educational Studies and Documents No. 17.

ERIC Educational Resources Information Center

Wolsk, David

This study describes a Unesco-sponsored experimental project in the United Nations Associated Schools designed to develop a new approach to education for international understanding. The class, school, and community provide the settings for activities based on the pupils' own behaviors and experiences. Experiments, demonstrations, critical…

The Fantastic Facilitator: Engaging Activities for Leading Groups.

ERIC Educational Resources Information Center

Duttweiler, Patricia Cloud

This document is designed to help facilitators with the formation and development of effective teams of people who have no previous history as a team and no training in group processes. Part 1 provides a narrative explanation of the stages of group development (investing in membership, forming attachments to subgroups, confronting/debating issues,…

Foreign Language Week: A Successful Public Relations Model.

ERIC Educational Resources Information Center

Reschke, Claus

A detailed description is presented of a foreign language (FL) week project that was organized and executed by the Houston Area Teachers of Foreign Languages (HATFL) during the 1979-80 academic year. The document describes the preparation activities of the organizing committee, the pre-foreign language week advertising campaigns, the design of…

The Harnessed Atom: Nuclear Energy & Electricity.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC. Nuclear Energy Office.

This document is part of a nuclear energy curriculum designed for grades six through eight. The complete kit includes a written text, review exercises, activities for the students, and a teachers guide. The 19 lessons in the curriculum are divided into four units including: (1) "Energy and Electricity"; (2) "Understanding Atoms and Radiation"; (3)…

Prospective Elementary Teachers Making Sense of Multidigit Multiplication: Leveraging Resources

ERIC Educational Resources Information Center

Whitacre, Ian; Nickerson, Susan D.

2016-01-01

This study examines how collective activity related to multiplication evolved over several class sessions in an elementary mathematics content course that was designed to foster prospective elementary teachers' number-sense development. We document how the class drew on as-if-shared ideas to make sense of multidigit multiplication in terms of…

Marine Science/Business & Office. B7. CHOICE: Challenging Options in Career Education.

ERIC Educational Resources Information Center

Putnam and Northern Westchester Counties Board of Cooperative Educational Services, Yorktown Heights, NY.

The documents aggregated here comprise the grade six unit of a career education curriculum designed for migrant students. Focusing on marine science, business, and office occupations, the combined teacher and student logs contain learning activities related to nine jobs: hydrographer, marine biologist, fish hatchery technician, boat builder,…

Using Gestalt Theory to Teach Document Design and Graphics.

ERIC Educational Resources Information Center

Moore, Patrick; Fitz, Chad

1993-01-01

Presents a brief overview of Gestalt theory. Discusses and illustrates six key principles of Gestalt psychology as they apply to document design and graphics. Presents exercise that students may use to improve their understanding of the principles and develop their document design skills. Distinguishes between Gestalt theory and rhetoric. (RS)

Documenting the Engineering Design Process

ERIC Educational Resources Information Center

Hollers, Brent

2017-01-01

Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

28 CFR 0.180 - Documents designated as orders.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Orders of the Attorney General § 0.180 Documents designated as orders. All documents relating to the... by the Attorney General or to general departmental policy shall be designated as orders and shall be issued only by the Attorney General in a separate, numbered series. Classified orders shall be identified...

HATS: A Design Procedure for Routine Business Documents.

ERIC Educational Resources Information Center

Baker, William H.

2001-01-01

Describes an approach to teaching students a basic design process for routine business documents like memos, letters, and reports. Outlines the design principles of HATS (Headings, Access, Typography, and Spacing), how they apply in before-and-after fashion to various documents, and discusses an assignment in which students redesign an existing…

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

Software Design Document SAF Workstation. Volume 1, Sections 1.0 - 2.4. 3.4.86

DTIC Science & Technology

1991-06-01

SLECT TERMS IS. NUMER OF PAGES SIMNET Software Design Document for the SAF Workstation CSCI (CSCI 6). 14. PRICE CODE SECUWItY CLASSIFICATION Is. SECUJRITY...AD-A244 972 SOFTWARE DESIGN DOCUMENT SAF Workstation CSCI (6) Volume 1 of 2 Sections 1.0 - 2.4.3.4.86 DTIC June, 1991 Flt. FCTE S JAN 09 1992...00247 APPROVED FOR PUBLIC RELEASE DISTRBUTION UNLIMITED -Mono SOFTWARE DESIGN DOCUMENT SAF Workstation CSCI (6) Volume 1 of 2 Sections 1.0 - 2.4.3.4.86

Overview of Threats and Failure Models for Safety-Relevant Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This document presents a high-level overview of the threats to safety-relevant computer-based systems, including (1) a description of the introduction and activation of physical and logical faults; (2) the propagation of their effects; and (3) function-level and component-level error and failure mode models. These models can be used in the definition of fault hypotheses (i.e., assumptions) for threat-risk mitigation strategies. This document is a contribution to a guide currently under development that is intended to provide a general technical foundation for designers and evaluators of safety-relevant systems.

SIG Galileo final converter. Technical summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinderman, J.D.

1979-05-01

The report summarizes significant events, activities and achievements on the SIG/Galileo Converter Program at 3M Company during the period June 1, 1978 through May 15, 1979. A stop work order was received from DOE on January 29, 1979 and all subsequent work and close out activities targeted for completion by May 15, 1979. Section A describes, in detail, the component configurations developed and proposed for the SN-1 converter. This converter was the Flight Design with the possible exception of N-leg improvements and a cold frame-housing interface processing change. Included at the end of the converter description is the status ofmore » the design at the time of the stop work order. In Section B, the activities performed to accomplish the design goals are described as they occurred. Section C lists all pertinent documentation which was developed and issued relating to the design of the converter. This includes drawings, specifications, procedures and analysis. Operating requirements for the SN-1 converter are given.« less

Environmental guidance for public participation in environmental restoration activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-11-01

The US Department of Energy (DOE) is issuing this document, entitled Guidance on Public Participation for US Department of Energy Environmental Restoration Activities, to summarize policy and provide guidance for public participation in environmental restoration activities at DOE Headquarters, Field Offices, facilities, and laboratories. While the Office of Environmental Restoration and Waste Management (EM) has environmental restoration responsibility for the majority of DOE sites and facilities, other DOE Project Offices have similar responsibilities at their sites and facilities. This guidance is applicable to all environment restoration activities conducted by or for DOE under the Comprehensive Environmental Response, Compensation, and Liabilitymore » Act of 1980 (CERCLA) as amended by the Superfund Amendments and Reauthorization Act of 1986 (SARA); the Resource Conservation and Recovery Act of 1976 (RCRA) as amended by the Hazardous and Solid Waste Amendments of 1984 (HSWA) (corrective actions only); and the National Environmental Policy Act of 1969 (NEPA). This guidance also is applicable to CERCLA remedial action programs under the Uranium Mill Tailings Radiation Control Act of 1978 and the Formerly Utilized Sites Remedial Action Program, where DOE is the designated lead. The primary objectives of this guidance document are as follows: acclimate DOE staff to a changing culture that emphasizes the importance of public participation activities; provide direction on implementing these public participation activities; and, provide consistent guidance for all DOE Field Offices and facilities. The purpose of this document is to provide guidance on conducting effective public participation activities for environmental restoration activities under CERCLA; RCRA corrective actions under sections 3004(u), 3004(v), and 3008(h); and NEPA public participation activities.« less

Systems science and obesity policy: a novel framework for analyzing and rethinking population-level planning.

PubMed

Johnston, Lee M; Matteson, Carrie L; Finegood, Diane T

2014-07-01

We demonstrate the use of a systems-based framework to assess solutions to complex health problems such as obesity. We coded 12 documents published between 2004 and 2013 aimed at influencing obesity planning for complex systems design (9 reports from US and Canadian governmental or health authorities, 1 Cochrane review, and 2 Institute of Medicine reports). We sorted data using the intervention-level framework (ILF), a novel solutions-oriented approach to complex problems. An in-depth comparison of 3 documents provides further insight into complexity and systems design in obesity policy. The majority of strategies focused mainly on changing the determinants of energy imbalance (food intake and physical activity). ILF analysis brings to the surface actions aimed at higher levels of system function and points to a need for more innovative policy design. Although many policymakers acknowledge obesity as a complex problem, many strategies stem from the paradigm of individual choice and are limited in scope. The ILF provides a template to encourage natural systems thinking and more strategic policy design grounded in complexity science.

Description and Evaluation of a Four-Channel, Coherent 100-kHz Sidescan Sonar

DTIC Science & Technology

2004-12-01

document contains color images. 14. ABSTRACT This report documents the design and features of a new, four-channel, coherent 100-kHz sidescan sonar...Atlantic Technical Memorandum DRDC Atlantic TM 2004-204 December 2004 Abstract This report documents the design and features of a new...Results This report documents the design and features of this new high-frequency sonar system. These initial field trial results demonstrate some of

Organizational Cost of Quality Improvement for Depression Care

PubMed Central

Liu, Chuan-Fen; Rubenstein, Lisa V; Kirchner, JoAnn E; Fortney, John C; Perkins, Mark W; Ober, Scott K; Pyne, Jeffrey M; Chaney, Edmund F

2009-01-01

Objective We documented organizational costs for depression care quality improvement (QI) to develop an evidence-based, Veterans Health Administration (VA) adapted depression care model for primary care practices that performed well for patients, was sustained over time, and could be spread nationally in VA. Data Sources and Study Setting Project records and surveys from three multistate VA administrative regions and seven of their primary care practices. Study Design Descriptive analysis. Data Collection We documented project time commitments and expenses for 86 clinical QI and 42 technical expert support team participants for 4 years from initial contact through care model design, Plan–Do–Study–Act cycles, and achievement of stable workloads in which models functioned as routine care. We assessed time, salary costs, and costs for conference calls, meetings, e-mails, and other activities. Principle Findings Over an average of 27 months, all clinics began referring patients to care managers. Clinical participants spent 1,086 hours at a cost of $84,438. Technical experts spent 2,147 hours costing $197,787. Eighty-five percent of costs derived from initial regional engagement activities and care model design. Conclusions Organizational costs of the QI process for depression care in a large health care system were significant, and should be accounted for when planning for implementation of evidence-based depression care. PMID:19146566

Guidelines for Document Designers.

ERIC Educational Resources Information Center

Felker, Daniel B.; And Others

Intended to improve the quality of public documents by making them clearer to the people who use them, this book contains document design principles concerned with writing documents that are visually distinct, attractive, and easily understood. Following an introduction, the major portion of the book presents the 25 principles, each of which…

Functions and requirements for tank farm restoration and safe operations, Project W-314. Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrison, R.C.

1995-02-01

This Functions and Requirements document (FRD) establishes the basic performance criteria for Project W-314, in accordance with the guidance outlined in the letter from R.W. Brown, RL, to President, WHC, ``Tank Waste Remediation System (TWRS) Project Documentation Methodology,`` 94-PRJ-018, dated 3/18/94. The FRD replaces the Functional Design Criteria (FDC) as the project technical baseline documentation. Project W-314 will improve the reliability of safety related systems, minimize onsite health and safety hazards, and support waste retrieval and disposal activities by restoring and/or upgrading existing Tank Farm facilities and systems. The scope of Project W-314 encompasses the necessary restoration upgrades of themore » Tank Farms` instrumentation, ventilation, electrical distribution, and waste transfer systems.« less

ModSAF Software Architecture Design and Overview Document

DTIC Science & Technology

1993-12-20

ADVANCED DISTRIBUTED SIMULATIONTECHNOLOGY AD-A282 740 ModSAF SOFTWARE ARCHITECTURE DESIGN AND OVERVIEW DOCUMENT Ver 1.0 - 20 December 1993 D T...AND SUBTITLE 5. FUNDING NUMBERS MOdSAF SOFTWARE ARCHITECTURE DESIGN AND OVERVIEW DOCUMENT C N61339-91-D-O00, Delivery Order (0021), ModSAF (CDRL A004) 6

Automated Methodologies for the Design of Flow Diagrams for Development and Maintenance Activities

NASA Astrophysics Data System (ADS)

Shivanand M., Handigund; Shweta, Bhat

The Software Requirements Specification (SRS) of the organization is a text document prepared by strategic management incorporating the requirements of the organization. These requirements of ongoing business/ project development process involve the software tools, the hardware devices, the manual procedures, the application programs and the communication commands. These components are appropriately ordered for achieving the mission of the concerned process both in the project development and the ongoing business processes, in different flow diagrams viz. activity chart, workflow diagram, activity diagram, component diagram and deployment diagram. This paper proposes two generic, automatic methodologies for the design of various flow diagrams of (i) project development activities, (ii) ongoing business process. The methodologies also resolve the ensuing deadlocks in the flow diagrams and determine the critical paths for the activity chart. Though both methodologies are independent, each complements other in authenticating its correctness and completeness.

Issue of Building Information Modelling Implementation into the Czech Republic’s Legislation using the Level of Development

NASA Astrophysics Data System (ADS)

Prušková, Kristýna; Nývlt, Vladimír

2017-10-01

The object of this paper is the issue of links between the Level of Development of particular project in Building Information Modeling environment and the projects of certain stages of project documentation within the existing Czech Republic’s Legislation. This research article uses the experiences from the initiative of active working group „WG#03: BIM & Realization“, which is the part of the Czech BIM Council, especially the document called “Draft of unified data structure for Building Information Modeling in the Czech Republic”. The findings of this paper are in the defining specific Level of Development of relative parameters, mentioned in this document, connected to the specific level of information and details requested by the Czech Republic’s Legislation. These findings could be used as an underlay to create document called “Level of Development draft assignment to the individual stages of project documentation in the Czech Republic”. The Level of Development is the most useful way of the information visualization, which leads to the most effortless way of exact stated implementation of Building Information Modeling into the practice of designing structures and buildings in the Czech Republic. The Implementation of using Building Information Modeling technology in designing structures and buildings will lead to the enhanced quality of the project documentation and generally to more effective cost savings during whole life cycle of buildings. Moreover, the all over using of the BIM technology in the Czech Republic will be very useful in the Facility Management area, especially in the facility management and maintenance of state buildings.

Implementation Document for Other Contamination Sources Interim Response Action shell Section 36 Trenches, RMA. Volume 1. General

DTIC Science & Technology

1990-12-01

rights and obligations of theA Army as L.aaa Aqency-or Shall as Leand Party under any law or the Federai. Fact..ity (g) Unless otherwise provided in a...Exposure occurs principally during manufacture or during bulk handling activities. Since it is generally injected into the soil at depths of 15 to 30 cm...Slurry Mix Design: The design of the IMPERMIX grouting mix, which shall meet all requirements of the Impermix manufacturer . G. Quality Control Testing

Tank Remote Repair System Conceptual Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriikku, E.

2002-12-06

This document describes two conceptual designs for a Tank Remote Repair System to perform leak site repairs of double shell waste tank walls (Types I, II, III, and IIIA) from the annulus space. The first concept uses a magnetic wall crawler and an epoxy patch system and the second concept uses a magnetic wall crawler and a magnetic patch system. The recommended concept uses the magnetic patch system, since it is simpler to deliver, easier to apply, and has a higher probability of stopping an active leak.

Physical activity discrimination improvement using accelerometers and wireless sensor network localization - biomed 2013.

PubMed

Bashford, Gregory R; Burnfield, Judith M; Perez, Lance C

2013-01-01

Automating documentation of physical activity data (e.g., duration and speed of walking or propelling a wheelchair) into the electronic medical record (EMR) offers promise for improving efficiency of documentation and understanding of best practices in the rehabilitation and home health settings. Commercially available devices which could be used to automate documentation of physical activities are either cumbersome to wear or lack the specificity required to differentiate activities. We have designed a novel system to differentiate and quantify physical activities, using inexpensive accelerometer-based biomechanical data technology and wireless sensor networks, a technology combination that has not been used in a rehabilitation setting to date. As a first step, a feasibility study was performed where 14 healthy young adults (mean age = 22.6 ± 2.5 years, mean height = 173 ± 10.0 cm, mean mass = 70.7 ± 11.3 kg) carried out eight different activities while wearing a biaxial accelerometer sensor. Activities were performed at each participant’s self-selected pace during a single testing session in a controlled environment. Linear discriminant analysis was performed by extracting spectral parameters from the subjects’ accelerometer patterns. It is shown that physical activity classification alone results in an average accuracy of 49.5%, but when combined with rule-based constraints using a wireless sensor network with localization capabilities in an in silico simulated room, accuracy improves to 99.3%. When fully implemented, our technology package is expected to improve goal setting, treatment interventions and patient outcomes by enhancing clinicians’ understanding of patients’ physical performance within a day and across the rehabilitation program.

Design criteria for the light duty utility arm system end effectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pardini, A.F.; Kiebel, G.R.

1995-12-01

The purpose of this document is to provide criteria for the design of end effectors that will be used as part of the Light Duty Utility Arm (LDUA) System. Actual component design, fabrication, testing, and inspection will be performed by various DOE laboratories, industry, and academia. This document augments WHC-SD-TD-FRD-003, `Functions and Requirements for the Light Duty Utility Arm Integrated System` (F). All requirements dictated in the F shall also be applicable in this document. Whenever conflicts arise between this document and the F, this document shall take precedence.

Implementation and Evaluation of Two Educational Strategies to Improve Screening for Eating Disorders in Pediatric Primary Care.

PubMed

Gooding, Holly C; Cheever, Elizabeth; Forman, Sara F; Hatoun, Jonathan; Jooma, Farah; Touloumtzis, Currie; Vernacchio, Louis

2017-05-01

Routine screening for disordered eating or body image concerns is recommended by the American Academy of Pediatrics. We evaluated the ability of two educational interventions to increase screening for eating disorders in pediatric primary care practice, predicting that the "active-learning" group would have an increase in documented screening after intervention. We studied 303 practitioners in a large independent practice association located in the northeastern United States. We used a quasi-experimental design to test the effect of printed educational materials ("print-learning" group, n = 280 participants) compared with in-person shared learning followed by on-line spaced education ("active-learning" group, n = 23 participants) on documented screening of adolescents for eating disorder symptoms during preventive care visits. A subset of 88 participants completed additional surveys regarding knowledge of eating disorders, comfort screening for, diagnosing, and treating eating disorders, and satisfaction with their training regarding eating disorders. During the preintervention period, 4.5% of patients seen by practitioners in both the print-learning and active-learning groups had chart documentation of screening for eating disorder symptoms or body image concerns. This increased to 22% in the active-learning group and 5.7% in the print-learning group in the postintervention period, a statistically significant result. Compared with print-learning participants, active-learning group participants had greater eating disorder knowledge scores, increases in comfort diagnosing eating disorders, and satisfaction with their training in this area. In-person shared learning followed by on-line spaced education is more effective than print educational materials for increasing provider documentation of screening for eating disorders in primary care. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Design Package for Fuel Retrieval System Fuel Handling Tool Modification

DOE Office of Scientific and Technical Information (OSTI.GOV)

TEDESCHI, D.J.

This design package documents design, fabrication, and testing of new stinger tool design. Future revisions will document further development of the stinger tool and incorporate various developmental stages, and final test results.

Wind energy converter with high-speed vertical axis rotor and straight rotor blades

NASA Astrophysics Data System (ADS)

Zelck, G.

1982-11-01

Complete documents for a wind energy converter with a vertical axis rotor and straight blades (H-rotor) were developed. The 2 blade rotor with rigid and rectangular air foils in wooden construction reaches the nominal output of 75 KVA from 11,4 m/sec. wind velocity onwards. The development activities are supported by wind tunnel and component tests. The final design selected was based upon previous development work. Trade offs show that the design is more advantageous compared to other designs. The use of wood as a material for the rotary and horizontal blade supports gives positive result.

System design document for the INFLO prototype.

DOT National Transportation Integrated Search

2014-03-01

This report documents the high level System Design Document (SDD) for the prototype development and demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed Harmonization (SPD-HARM) and Queue Wa...

42 CFR 137.361 - Does the Secretary have any other opportunities to approve planning or design documents prepared...

Code of Federal Regulations, 2010 CFR

2010-10-01

... approve planning or design documents prepared by the Self-Governance Tribe? 137.361 Section 137.361 Public... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in... opportunities to approve planning or design documents prepared by the Self-Governance Tribe? Yes, but only if...

The New Youth Entrepreneur: Getting Ready for Entrepreneurship. Business Ideas for All Communities. Module 3.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the third module, which focuses on issues related to starting a business and providing ideas for…

40 CFR 798.5500 - Differential growth inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA...

Code of Federal Regulations, 2010 CFR

2010-07-01

... should be documented and should be adequate for the experimental design. (5) Metabolic activation... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Differential growth inhibition of... titers (cells per ml). Transformed data alone in the absence of experimental data are not acceptable (i.e...

TIPS: Crime Resistance Strategies, 6. Teaching Individuals Protective Strategies, Teaching Individuals Positive Solutions.

ERIC Educational Resources Information Center

Bass, Martha; And Others

This booklet outlines activities and objectives for a crime prevention education program in the sixth grade. The document is part of a K-eighth grade crime resistance project designed to promote and maintain positive student attitudes and behavior, to assist students in meeting their responsibilities, and to help them insure their own and other…

The New Youth Entrepreneur: You Can Make It Happen. YESS! You. The Business Plan. Module 12.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur curriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the twelfth module, and discusses the usefulness of a business plan for entrepreneurs starting small…

Basic Science Living Skills for Today's World. Teacher's Edition.

ERIC Educational Resources Information Center

Zellers (Robert W.) Educational Services, Johnstown, PA.

This document is a teacher's edition of a basic skills curriculum in science for adult basic education (ABE) students. The course consists of 25 lessons on basic science concepts, designed to give students a good understanding of the biological and physical sciences. Suggested activities and experiments that the student can do are also included.…

CMU/IBM Usability Study: Final Report. CDC Technical Report No. 11.

ERIC Educational Resources Information Center

Ballay, Joseph M.; And Others

This report focuses on the activities and findings of the fourth phase of research carried out at Carnegie-Mellon University (CMU) on the development of user documentation for computer-aided design (CAD) systems. The first of four major sections provides an overview of recent research, issues involved in the research, and implications of the…

Money Management and the Consumer, Credit: "Ch . a . r . ge!".

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

This unit, one of a series of six Project SCAT (Skills for Consumer Applied Today) units, is designed to help senior high school students develop consumer education skills. For a description of the specific objectives and format of the units, see SO 013 467. This document provides teaching methods, learning activities, and student booklet for a…

Cycles for Science: Biology Curriculum Supplement for Grades 9-12. A Steel Cycles Program.

ERIC Educational Resources Information Center

Rogers, Diana; Laymon, Carol

This document contains project-oriented lessons and hands-on activities developed to integrate steel recycling, natural resource conservation, and solid waster management into science learning. It is designed to assist secondary teachers and students (grades 9-12) in meeting state and local goals for learning in biology, chemistry, general science…

76 FR 60556 - Agency Information Collection Activities: Submission for the Office of Management and Budget (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... the Public Document Room (PDR), and submitters of information containing trade secrets or confidential... processing. Section 9.28(b) provides that if the submitter of information designated to be trade secrets or... within 30 days that specifies all grounds why the information is a trade secret or commercial or...

Storms & Blizzards. The Natural Disaster Series. Grades 4-8.

ERIC Educational Resources Information Center

Micallef, Mary

This document provides a unit of lessons and activities on thunder storms and blizzards that are intended to provide students with a basic understanding of the causes and consequences of these natural disasters. The booklet is designed to be used in correlation with a science unit or as a supplement to an elementary science curriculum. The lessons…

Germany: The Search for Unity. Guide for Workshop Leaders.

ERIC Educational Resources Information Center

Blankenship, Glen

This document is designed to support teachers in the use of instructional materials related to contemporary Germany. The materials in this guide provide the basis for a one-day, 5 hour inservice session. The workshop agenda begins the guide and sets out the schedule of times for different activities and instruction. The suggested format can be…

Making Connections: Intentional Teaching for Integrative Learning

ERIC Educational Resources Information Center

Higgs, Bettie, Ed.; Kilcommins, Shane, Ed.; Ryan, Tony, Ed.

2010-01-01

In this volume the authors document examples of programmes/courses/activities that are designed intentionally to build students' capacity to be integrative thinkers and learners. In doing so they try to analyse and name the learning that is taking place, and so make it visible to the reader. The work is intended as a resource for all those…

Trash Conflicts: A Science and Social Studies Curriculum on the Ethics of Disposal. An Interdisciplinary Curriculum.

ERIC Educational Resources Information Center

Ballin, Amy; And Others

Designed for middle school science and social studies classes, this document is a curriculum on waste disposal. Mathematics and language skills also are incorporated into many of the activities. In the study of trash disposal, science students benefit from understanding the social issues related to the problem. Social studies students need…

Beginnings: Beginning Musical Strategies with Social Implications for Level V Middle School Students in Baltimore County, Maryland.

ERIC Educational Resources Information Center

Teske, Patricia W.

This document presents strategies developed for teaching learning disabled, emotionally disturbed, or intellectually limited middle school students in the music classroom. The proposed strategies are designed to meet the following criteria: (1) the musical activities are to be musically appropriate for middle school adolescents; (2) each activity…

Multi-Cultural Competency-Based Vocational Curricula. Clerical Clusters. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on clerical occupations. This program is designed to run 36 weeks and cover 10 instructional areas: beginning typing, typing I, typing II, duplicating, receptionist activities, general office procedures, operation of electronic calculator,…

General Science, Ninth Grade: Theme III and Theme IV. Student Laboratory Manual. Experimental.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This document is the student laboratory manual that was designed to accompany some of the experimental activities found in the teacher's guide to this general science course for ninth graders. It contains laboratory worksheets for lessons on such topics as: (1) soil; (2) hazardous waste; (3) wildlife refuges; (4) the water cycle; (5) water…

Alternative Fuels for Washington's School Buses: A Report to the Washington State Legislature.

ERIC Educational Resources Information Center

Lyons, John Kim; McCoy, Gilbert A.

This document presents findings of a study that evaluated the use of both propane and compressed natural gas as alternative fuels for Washington State school buses. It discusses air quality improvement actions by state- and federal-level regulators and summarizes vehicle design, development, and commercialization activities by all major engine,…

Mapping Points of Interest: An Analysis of Students' Engagement with Digital Primary Sources

ERIC Educational Resources Information Center

Rysavy, Monica D. T.; Michalak, Russell; Hunt, Kevin

2018-01-01

The Digital Archival Advertisements Survey Process (DAASP) model is a collaborative active learning exercise designed to aid students in evaluating primary source documents of print-based advertisements. By deploying DAASP, the researchers were able to assess the students' ability to evaluate their biases of the advertisements in a first-year…

A Curriculum Activities Guide to Solid Wastes and Environmental Studies, Volume 4.

ERIC Educational Resources Information Center

Hershey, John T., Ed.; And Others

This document, developed for elementary and secondary students, is one of a series emphasizing student-oriented problem solving related to environmental matters. It is designed to guide others in initiating, continuing, or expanding their environmental education program. Volume 4 is intended for use by cadre who have used similar materials at a…

Guide to Facilities, Capabilities, and Programs of Medical Schools in the United States.

ERIC Educational Resources Information Center

Mayeda, Tadashi A.

The information in this document was gathered to aid analysts and designers of the proposed Biomedical Communications Network (BCN) of the National Library of Medicine. The current capabilities and facilities of medical schools in areas of activity impinging on the concept and role of BCN are summarized. Medical schools are listed geographically…

Built Heritage Documentation and Management: AN Integrated Conservation Approach in Bagan

NASA Astrophysics Data System (ADS)

Mezzino, D.; Chan, L.; Santana Quintero, M.; Esponda, M.; Lee, S.; Min, A.; Pwint, M.

2017-08-01

Good practices in heritage conservation are based on accurate information about conditions, materials, and transformation of built heritage sites. Therefore, heritage site documentation and its analysis are essential parts for their conservation. In addition, the devastating effects of recent catastrophic events in different geographical areas have highly affected cultural heritage places. Such areas include and are not limited to South Europe, South East Asia, and Central America. Within this framework, appropriate acquisition of information can effectively provide tools for the decision-making process and management. Heritage documentation is growing in innovation, providing dynamic opportunities for effectively responding to the alarming rate of destruction by natural events, conflicts, and negligence. In line with these considerations, a multidisciplinary team - including students and faculty members from Carleton University and Yangon Technological University, as well as staff from the Department of Archaeology, National Museum and Library (DoA) and professionals from the CyArk foundation - developed a coordinated strategy to document four temples in the site of Bagan (Myanmar). On-field work included capacity-building activities to train local emerging professionals in the heritage field (graduate and undergraduate students from the Yangon Technological University) and to increase the technical knowledge of the local DoA staff in the digital documentation field. Due to the short time of the on-field activity and the need to record several monuments, a variety of documentation techniques, including image and non-image based ones, were used. Afterwards, the information acquired during the fieldwork was processed to develop a solid base for the conservation and monitoring of the four documented temples. The relevance of developing this kind of documentation in Bagan is related to the vulnerability of the site, often affected by natural seismic events and flooding, as well as the lack of maintenance. Bagan provided an excellent case study to test the effectiveness of the proposed approach, to prevent and manage the damages of catastrophic events, and to support retrofitting actions. In order to test the flexibility of adopted methodology and workflow, temples with different features - in terms of architectural design, shape, and geometry - were selected. The goals of these documentation activities range from testing digital documentation workflows for the metric and visual recording of the site (reviewing strengths and limitations of particular recording techniques), to the definition of effective conditions assessment strategies.

Phase II Report: Design Study for Automated Document Location and Control System.

ERIC Educational Resources Information Center

Booz, Allen Applied Research, Inc., Bethesda, MD.

The scope of Phase II is the design of a system for document control within the National Agricultural Library (NAL) that will facilitate the processing of the documents selected, ordered, or received; that will avoid backlogs; and that will provide rapid document location reports. The results are set forth as follows: Chapter I, Introduction,…

A Visible Ideology: A Document Series in a Women's Clothing Company.

ERIC Educational Resources Information Center

Cronn-Mills, Kirstin

2000-01-01

Notes that corporate documents of a women's clothing company changed in one season from relatively outdated designs to more updated, professional layouts but the content changed very little. Contends that the document redesign indicates a move to a more feminist outlook for the company. Describes how the document design represents a slow change…

An electronic regulatory document management system for a clinical trial network.

PubMed

Zhao, Wenle; Durkalski, Valerie; Pauls, Keith; Dillon, Catherine; Kim, Jaemyung; Kolk, Deneil; Silbergleit, Robert; Stevenson, Valerie; Palesch, Yuko

2010-01-01

A computerized regulatory document management system has been developed as a module in a comprehensive Clinical Trial Management System (CTMS) designed for an NIH-funded clinical trial network in order to more efficiently manage and track regulatory compliance. Within the network, several institutions and investigators are involved in multiple trials, and each trial has regulatory document requirements. Some of these documents are trial specific while others apply across multiple trials. The latter causes a possible redundancy in document collection and management. To address these and other related challenges, a central regulatory document management system was designed. This manuscript shares the design of the system as well as examples of it use in current studies. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Machine learning-based coreference resolution of concepts in clinical documents

PubMed Central

Ware, Henry; Mullett, Charles J; El-Rawas, Oussama

2012-01-01

Objective Coreference resolution of concepts, although a very active area in the natural language processing community, has not yet been widely applied to clinical documents. Accordingly, the 2011 i2b2 competition focusing on this area is a timely and useful challenge. The objective of this research was to collate coreferent chains of concepts from a corpus of clinical documents. These concepts are in the categories of person, problems, treatments, and tests. Design A machine learning approach based on graphical models was employed to cluster coreferent concepts. Features selected were divided into domain independent and domain specific sets. Training was done with the i2b2 provided training set of 489 documents with 6949 chains. Testing was done on 322 documents. Results The learning engine, using the un-weighted average of three different measurement schemes, resulted in an F measure of 0.8423 where no domain specific features were included and 0.8483 where the feature set included both domain independent and domain specific features. Conclusion Our machine learning approach is a promising solution for recognizing coreferent concepts, which in turn is useful for practical applications such as the assembly of problem and medication lists from clinical documents. PMID:22582205

A multi-agent system for monitoring patient flow.

PubMed

Rosati, Samanta; Tralli, Augusta; Balestra, Gabriella

2013-01-01

Patient flow within a healthcare facility may follow different and, sometimes, complicated paths. Each path phase is associated with the documentation of the activities carried out during it and may require the consultation of clinical guidelines, medical literature and the use of specific software and decision aid systems. In this study we present the design of a Patient Flow Management System (PFMS) based on Multi Agent Systems (MAS) methodology. System requirements were identified by means of process modeling tools and a MAS consisting of six agents was designed and is under construction. Its main goal is to support both the medical staff during the health care process and the hospital managers in assuring that all the required documentation is completed and available. Moreover, such a tool can be used for the assessment and comparison of different clinical pathways, in order to identify possible improvementsand the optimum patient flow.

ADST Software Design Document for the BDS-D VIDS-equipped M1

DTIC Science & Technology

1993-09-10

system responds to perceived threats in the following ways:I a. by displaying visual icons on the Commander’s Controls Display Panel (CCDP). b. by...also referred to as the Soldier Machine Interface (SMI) and the Commander’s Controls Display Panel (CCDP). 3.2.1. VIDS-GT CSC The VIDS-GT CSC handles...countermeasure will be activated first in Individual_CM_Simul. 4.1.3.4.3. IndividualCMSimul CSU IndividualCM-Simul controls the activation and deactivation of

SEEDS: A Celebration of Science

NASA Technical Reports Server (NTRS)

Melton, Bob

1991-01-01

The major goal of the project of Space Exposed Experiment Developed for Students (SEEDS) was to stimulate interest in science through the active involvement of all participants. Youthful investigators utilized the basic and integrated science process skills as they conducted the research necessary to complete the data reports used in the compilation of this document. Participants described many unique activities designed to promote critical thinking and problem solving. Seeds made a significant impact toward enhancing the teaching, learning, and enjoyment of science for students worldwide.

Superfund explanation of significant difference for the Record of Decision (EPA Region 10): Umatilla Army Depot (Lagoons), Hermiston, OR, September 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-10-01

This document presents an Explanation of Significant Difference (ESD) from the Record of Decision (ROD) for the Umatilla Depot Activity (UMDA) Explosives Washout Lagoons Soils Operable Unit issued September 25, 1992 (PB93-964610). This ESD documents the significant differences to the selected remedy outlined in the ROD. In summary, the significant difference from the selected remedy in the ROD is the utilization of the treated soil as the organic component in the re-vegetation of several designated sites on the installation rather than backfilling the former Explosive Washout Lagoons with the compost.

Flight design system-1 system design. Volume 5: Data management and data base documentation support system. [for shuttle flight planning

NASA Technical Reports Server (NTRS)

1979-01-01

Application software intended to reduce the man-hours required per flight design cycle by producing major flight design documents with little or no manual typing is described. The documentation support software is divided into two separately executable processors. However, since both processors support the same overall functions, and most of the software contained in one is also contained in the other, both are collectively presented.

Preliminary design review report - sludge offload system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcwethy, L.M. Westinghouse Hanford

1996-06-05

This report documents the conceptual design review of the sludge offload system for the Spent Nuclear Fuel Project. The design description, drawings, available analysis, and safety analysis were reviewed by a peer group. The design review comments and resolutions are documented.

ROMPS critical design review. Volume 3: Furnace module design documentation

NASA Technical Reports Server (NTRS)

Dobbs, M. E.

1992-01-01

As part of the furnace module design documentation, the furnace module Easylab programs definitions and command variables are described. Also included are Easylab commands flow charts and fault conditions.

Documentation of medication changes in inpatient clinical notes: an audit to support quality improvement.

PubMed

Peusschers, Elsie; Twine, Jaryth; Wheeler, Amanda; Moudgil, Vikas; Patterson, Sue

2015-04-01

To describe completeness and accuracy of recording medication changes in progress notes during psychiatric inpatient admissions. A retrospective audit of records of 54 randomly selected psychiatric admissions at a metropolitan tertiary hospital. Medication changes recorded on National Inpatient Medication Chart (NIMC) were compared to documentation in the clinical progress records and assessed for completeness against seven quality criteria. With between one and 32 medication changes per admission, a total of 519 changes were recorded in NIMCs. Just over half were documented in progress notes. Psychotropic and regular medications were more frequently charted than 'other' and 'if required' medications. Documentation was seldom comprehensive. Medication name was most frequently documented; desired therapeutic effect or potential adverse effects were rarely documented. Evidence of patient involvement in, and an explicit rationale for, a change were infrequently recorded. Revealing substantial gaps in communication about medication changes during psychiatric admission, this audit sheds light on a previously undescribed source of medication error, warranting attention. Further research is needed to examine barriers to best practice, to support design and implementation of quality improvement activities but in the interim, attention should be addressed to development and articulation of content and procedures for documentation. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Functional requirements document for NASA/MSFC Earth Science and Applications Division: Data and information system (ESAD-DIS). Interoperability, 1992

NASA Technical Reports Server (NTRS)

Stephens, J. Briscoe; Grider, Gary W.

1992-01-01

These Earth Science and Applications Division-Data and Information System (ESAD-DIS) interoperability requirements are designed to quantify the Earth Science and Application Division's hardware and software requirements in terms of communications between personal and visualization workstation, and mainframe computers. The electronic mail requirements and local area network (LAN) requirements are addressed. These interoperability requirements are top-level requirements framed around defining the existing ESAD-DIS interoperability and projecting known near-term requirements for both operational support and for management planning. Detailed requirements will be submitted on a case-by-case basis. This document is also intended as an overview of ESAD-DIs interoperability for new-comers and management not familiar with these activities. It is intended as background documentation to support requests for resources and support requirements.

Monte Carlo Simulation Tool Installation and Operation Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguayo Navarrete, Estanislao; Ankney, Austin S.; Berguson, Timothy J.

2013-09-02

This document provides information on software and procedures for Monte Carlo simulations based on the Geant4 toolkit, the ROOT data analysis software and the CRY cosmic ray library. These tools have been chosen for its application to shield design and activation studies as part of the simulation task for the Majorana Collaboration. This document includes instructions for installation, operation and modification of the simulation code in a high cyber-security computing environment, such as the Pacific Northwest National Laboratory network. It is intended as a living document, and will be periodically updated. It is a starting point for information collection bymore » an experimenter, and is not the definitive source. Users should consult with one of the authors for guidance on how to find the most current information for their needs.« less

Data to action: using formative research to develop intervention programs to increase physical activity in adolescent girls.

PubMed

Young, Deborah Rohm; Johnson, Carolyn C; Steckler, Allan; Gittelsohn, Joel; Saunders, Ruth P; Saksvig, Brit I; Ribisl, Kurt M; Lytle, Leslie A; McKenzie, Thomas L

2006-02-01

Formative research is used to inform intervention development, but the processes of transmitting results to intervention planners and incorporating information into intervention designs are not well documented. The authors describe how formative research results from the Trial of Activity for Adolescent Girls (TAAG) were transferred to planners to guide intervention development. Methods included providing oral and written reports, prioritizing recommendations, and cross-checking recommendations with intervention objectives and implementation strategies. Formative work influenced the intervention in many ways. For example, results indicated that middle schools offered only coeducational physical education and health education classes, so the TAAG intervention was designed to be appropriate for both sexes, and intervention strategies were developed to directly address girls' stated preferences (e.g., enjoyable activities, opportunity to socialize) and barriers (e.g., lack of skills, fear of injury) for physical activity. The challenges of using formative research for intervention development are discussed.

DataRocket: Interactive Visualisation of Data Structures

NASA Astrophysics Data System (ADS)

Parkes, Steve; Ramsay, Craig

2010-08-01

CodeRocket is a software engineering tool that provides cognitive support to the software engineer for reasoning about a method or procedure and for documenting the resulting code [1]. DataRocket is a software engineering tool designed to support visualisation and reasoning about program data structures. DataRocket is part of the CodeRocket family of software tools developed by Rapid Quality Systems [2] a spin-out company from the Space Technology Centre at the University of Dundee. CodeRocket and DataRocket integrate seamlessly with existing architectural design and coding tools and provide extensive documentation with little or no effort on behalf of the software engineer. Comprehensive, abstract, detailed design documentation is available early on in a project so that it can be used for design reviews with project managers and non expert stakeholders. Code and documentation remain fully synchronised even when changes are implemented in the code without reference to the existing documentation. At the end of a project the press of a button suffices to produce the detailed design document. Existing legacy code can be easily imported into CodeRocket and DataRocket to reverse engineer detailed design documentation making legacy code more manageable and adding substantially to its value. This paper introduces CodeRocket. It then explains the rationale for DataRocket and describes the key features of this new tool. Finally the major benefits of DataRocket for different stakeholders are considered.

DESIGNING AN OPPORTUNITY FUEL WITH BIOMASS AND TIRE-DERIVED FUEL FOR COFIRING AT WILLOW ISLAND GENERATING STATION AND COFIRING SAWDUST WITH COAL AT ALBRIGHT GENERATING STATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

K. Payette; D. Tillman

During the period April 1, 2003--June 30, 2003, Allegheny Energy Supply Co., LLC (Allegheny) proceeded with demonstration operations at the Willow Island Generating Station and improvements to the Albright Generating Station cofiring systems. The demonstration operations at Willow Island were designed to document integration of biomass cofiring into commercial operations. The Albright improvements were designed to increase the resource base for the projects, and to address issues that came up during the first year of operations. This report summarizes the activities associated with the Designer Opportunity Fuel program, and demonstrations at Willow Island and Albright Generating Stations.

Innovative Design of Complex Engineering Systems

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler)

2004-01-01

The document contains the proceedings of the training workshop on Innovative Design of Complex Engineering Systems. The workshop was held at the Peninsula Higher Education Center, Hampton, Virginia, March 23 and 24, 2004. The workshop was jointly sponsored by Old Dominion University and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to a) provide broad overviews of the diverse activities related to innovative design of high-tech engineering systems; and b) identify training needs for future aerospace work force development in the design area. The format of the workshop included fifteen, half-hour overview-type presentations, a panel discussion on how to teach and train engineers in innovative design, and three exhibits by commercial vendors.

Alternatives for Developing User Documentation for Applications Software

DTIC Science & Technology

1991-09-01

style that is designed to match adult reading behaviors, using reader-based writing techniques, developing effective graphics , creating reference aids...involves research, analysis, design , and testing. The writer must have a solid understanding of the technical aspects of the document being prepared, good...ABSTRACT The preparation of software documentation is an iterative process that involves research, analysis, design , and testing. The writer must have

Meeting IYA Goals for Diverse Science Center and Planetarium Audiences

NASA Astrophysics Data System (ADS)

Nichols Yehling, Michelle; Carney, K.

2008-05-01

The International Year of Astronomy provides the Adler Planetarium in Chicago, IL with a chance to bring astronomy into the greater Chicagoland area. 1) The presenters will outline Adler's program plans to date, from community outreach programs such as Café Scientifique and citizen science light pollution observations, to programs within the institution, like a temporary exhibit about how telescopes have shaped our understanding of the cosmos. The presenters will focus on the range of programming and how this suite of programs brings together IYA topical threads, addressing sustainability and the needs of our audiences. 2) How do we know that the IYA programs we design actually work for our audiences? How do we assess and improve our work? This session will introduce participants to the "backwards design” process through which Adler educators create experiences that begin with focused goals. Facilitators will take participants through the Adler's evaluation planning method that uncovers what we want to know about our educational programs and experiences. Tools for program design and evaluation will be shared. 3) Facilitators will present for discussion three activities that have been designed and evaluated for one of our audiences, the museum-going family. Workshop participants are invited to critique and discuss these activities, their rationale, their fit with identified audience and institutional needs, and IYA thematic strands. Participants will share any ideas they have for adaptation of these activities for other audiences in their own settings. 4) Finally, all of the educational design and evaluation tools, program descriptions, and lesson plans will be compiled into an electronic document. Participants are encouraged to bring program description examples and/or activity lesson plans that can be incorporated into the document to provide an IYA "workbook". This workbook will be sent to all interested session participants by no later than July 31, 2008.

Implementing personal digital assistant documentation of pharmacist interventions in a military treatment facility.

PubMed

Ford, Stephen; Illich, Stan; Smith, Lisa; Franklin, Arthur

2006-01-01

To describe the use of personal digital assistants (PDAs) in documenting pharmacists' clinical interventions. Evans Army Community Hospital (EACH), a 78-bed military treatment facility, in Colorado Springs. Pharmacists on staff at EACH. All pharmacists at EACH used PDAs with the pilot software to record interventions for 1 month. The program underwent final design changes and then became the sole source for recording pharmacist interventions. The results of this project are being evaluated every 3 months for the first year and yearly thereafter. Visual CE (Syware Inc. Cambridge, Mass.) software was selected to develop fields for the documentation tool. This software is simple and easy to use, and users can retrieve reports of interventions from both inpatient and outpatient sections. The software needed to be designed so that data entry would only take a few minutes and ad hoc reports could be produced easily. Number of pharmacist interventions reported, time spent in clinical interventions, and outcome of clinical intervention. Implementing a PDA-based system for documenting pharmacist interventions across ambulatory, inpatient, and clinical services dramatically increased reporting during the first 6 months after implementation (August 2004-February 2005). After initial fielding, clinical pharmacists in advanced practice settings (such as disease management clinic, anticoagulation clinic) recognized a need to tailor the program to their specific activities, which resulted in a spin-off program unique to their practice roles. A PDA-based system for documenting clinical interventions at a military treatment facility increased reporting of interventions across all pharmacy points of service. Pharmacy leadership used these data to document the impact of pharmacist interventions on safety and quality of pharmaceutical care provided.

Document Design: A Review of the Relevant Research.

ERIC Educational Resources Information Center

Felker, Daniel B., Ed.

Research from several disciplines has been examined to create this literature review of information on document design, the overall movement toward producing public documents that the intended users can understand. Six chapters review appropriate research from the areas of psycholinguistics, cognitive psychology, instructional research,…

Transit safety retrofit package development : architecture and design specifications.

DOT National Transportation Integrated Search

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical objectives stated in the TRP requirements document. The document begins with an architectural overview that identifies and describes...

Audio-Visual Aids for Pre-School and Primary School Children. A Training Document. Aids to Programming UNICEF Assistance to Education.

ERIC Educational Resources Information Center

Narayan, Shankar

This discussion of the importance and scope of audiovisual aids in the educational programs and activities designed for children in developing countries includes the significance of audiovisual aids in pre-school and primary school education, types of audiovisual aids, learning from pictures, creative art materials, play materials, and problems…

The Development and Evaluation of a User-Friendly Database Describing PA's School Districts. Pennsylvania Educational Policy Studies, Number 13.

ERIC Educational Resources Information Center

George, Carole A.

This document describes a study that designed, developed, and evaluated the Pennsylvania school-district database program for use by educational decision makers. The database contains current information developed from data provided by the Pennsylvania Department of Education and describes each of the 500 active school districts in the state. PEP…

A Comprehensive Vocational Education Program for Career Development in Leon County. Final Report. Volume 1. Program Performance Report.

ERIC Educational Resources Information Center

Leon County Schools, Tallahassee, FL.

The document presents an account of project activities that evolved around the development and implementation of career education in Leon County School District, Florida. The purpose of the project was to begin effecting needed educational changes at the K-14 level by developing a comprehensive career education program designed to increase student…

Good Beginnings Are Not the Measure of Success: Using an Outcomes Logic Model to Track the Progress of the Irish Integrative Learning Project

ERIC Educational Resources Information Center

Ryan, C. Anthony; Higgs, Bettie; Kilcommins, Shane

2009-01-01

Background: The resources, needs and implementation activities of educational projects are often straightforward to document, especially if objectives are clear. However, developing appropriate metrics and indicators of outcomes and performance is not only challenging but is often overlooked in the excitement of project design and implementation.…

The New Youth Entrepreneur: How To Sell Your Idea. The "What's in It for Me" (WIIFM) Factor. Module 4.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur currriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the fourth module, which focuses on issues related to marketing, such as market niches and research,…

Money Management and the Consumer, Banking: "You Can Bank On It".

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

This unit, one of a series of six Project SCAT (Skills for Consumer Applied Today) units, is designed to help senior high school students develop consumer education skills. For a description of the specific objectives and format of the units, see SO 013 467. This document provides learning activities, teaching methods, and a student booklet for a…

Origins and Credibility of the Health Risk Assessment II

DTIC Science & Technology

2006-04-28

emotional, organizational and spiritual wellbeing . The desired end result was improved unit performance through health ] education and actions designed...The DD 2796 is used to document post- deployment health problems and occupational or environmental exposures and is not )necessarily a screening tool...and environmental exposures related to wartime activities. There are many references in professional literature regarding the links between

Money Management and the Consumer, Taxes: "An Offer You Can't Avoid."

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

This unit, one of a series of six Project SCAT (Skills for Consumer Applied Today) units, is designed to help senior high school students develop consumer education skills. For a description of the specific objectives and format of the units, see SO 013 467. This document provides teaching methods, learning activities, and a student booklet for a…

A SCALE-UP Mock-Up: Comparison of Student Learning Gains in High- and Low-Tech Active-Learning Environments

ERIC Educational Resources Information Center

Soneral, Paula A. G.; Wyse, Sara A.

2017-01-01

Student-centered learning environments with upside-down pedagogies (SCALE-UP) are widely implemented at institutions across the country, and learning gains from these classrooms have been well documented. This study investigates the specific design feature(s) of the SCALE-UP classroom most conducive to teaching and learning. Using pilot survey…

Report on Pilot Test Of Impact and In-Depth Measures. Child and Family Mental Health Project.

ERIC Educational Resources Information Center

Condry, Sandra; Hayes, William A.

This document reports the pilot test of the two components of the Child and Family Mental Health (CFMH) Evaluation Project -- the impact evaluation component and the in-depth evaluation component. (The impact evaluation is designed to determine the effects of the two primary prevention models of service and activities on the CFMH Head Start…

Learning Activity Packets for High School Social Studies, American Studies, American History and Low Achieving Students. Course I.

ERIC Educational Resources Information Center

Seif, Elliott

The document presents student learning packets designed to provide an alternative social studies experience for high school students. The objective is to enable students to better understand themselves and their environment and other individuals and groups. Written at a junior high school reading level, the packets are intended to be used with low…

Air Force Technical Objective Document, FY89.

DTIC Science & Technology

1988-04-01

threat warning; multimegawatt stand-off jammers; a family of new, broadband , active decoy expendables; E4? subsystems and EW suites for Military...and monolithic integrated circuits. (3) Microwave TWTs Develop microwave tube technology and selected thermionic power sources and amplifiers for ECM...Improved design reliability and multiple application of tube technology are stressed. Improve Traveling Wave Tube ( TWT ) reliability by instrumenting a TWT

Patterns of Substance Use and Delinquency among Inner City Adolescents.

ERIC Educational Resources Information Center

Brounstein, Paul J.

This document comprises a study of how inner city adolescent males who used and/or sold drugs or had been involved in other criminal activities differed from those who had not, in order to design prevention and treatment programs and policies. The study sample consisted of 387 minority male youth (96 percent Black; 4 percent Hispanic) of ninth and…

Causes of Hunger: A User's Guide for Christian Congregations. Companion Guide to Causes of Hunger: Hunger 1995.

ERIC Educational Resources Information Center

Park, Susan Kay; Simmons, Jim

This document is an interactive, intergenerational guide designed to help organize group or individual study of "Causes of Hunger." The guide includes activities, worship aids, Bible studies, and a resource list--all adapted for classes, weekend retreats, and evening meetings. The guide is divided into nine sessions to be used with a variety of…

High Throughput Determination of Ricinine Abrine and Alpha ...

EPA Pesticide Factsheets

Analytical Method This document provides the standard operating procedure for determination of ricinine (RIC), abrine (ABR), and α-amanitin (AMAN) in drinking water by isotope dilution liquid chromatography tandem mass spectrometry (LC/MS/MS). This method is designed to support site-specific cleanup goals of environmental remediation activities following a homeland security incident involving one or a combination of these analytes.

The Use of Linear Models for Determining School Workload and Activity Level.

ERIC Educational Resources Information Center

Vicino, Frank L.

This paper outlines the design and use of two linear models as decision-making tools in a school district. The problem to be solved was the allocation of resources for both clerical and custodial personnel. A solution was desired that could be quantified and documented and objectively serve the needs of the district. A clerical support model was…

Getting It Together: An Integrated Approach to Junior High Career Education: A Teachers Guide.

ERIC Educational Resources Information Center

Gorby, Carol J.

The document contains instructional materials for a course called Getting It Together (G.I.T.-7) which is designed for the seventh grade level. The course, an exemplary career education project of the Cal Young Junior High School in Eugene, Oregon focuses on two major areas: (1) self-awareness--22 lessons focusing on learning activities dealing…

A hybrid intelligence approach to artifact recognition in digital publishing

NASA Astrophysics Data System (ADS)

Vega-Riveros, J. Fernando; Santos Villalobos, Hector J.

2006-02-01

The system presented integrates rule-based and case-based reasoning for artifact recognition in Digital Publishing. In Variable Data Printing (VDP) human proofing could result prohibitive since a job could contain millions of different instances that may contain two types of artifacts: 1) evident defects, like a text overflow or overlapping 2) style-dependent artifacts, subtle defects that show as inconsistencies with regard to the original job design. We designed a Knowledge-Based Artifact Recognition tool for document segmentation, layout understanding, artifact detection, and document design quality assessment. Document evaluation is constrained by reference to one instance of the VDP job proofed by a human expert against the remaining instances. Fundamental rules of document design are used in the rule-based component for document segmentation and layout understanding. Ambiguities in the design principles not covered by the rule-based system are analyzed by case-based reasoning, using the Nearest Neighbor Algorithm, where features from previous jobs are used to detect artifacts and inconsistencies within the document layout. We used a subset of XSL-FO and assembled a set of 44 document samples. The system detected all the job layout changes, while obtaining an overall average accuracy of 84.56%, with the highest accuracy of 92.82%, for overlapping and the lowest, 66.7%, for the lack-of-white-space.

Overview of Design, Lifecycle, and Safety for Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This document describes the need and justification for the development of a design guide for safety-relevant computer-based systems. This document also makes a contribution toward the design guide by presenting an overview of computer-based systems design, lifecycle, and safety.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report supplements the final safety evaluation report (FSER) for the System 80+ standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1462 in August 1994 to document the NRC staff`s review of the System 80+ design. The System 80+ design was submitted by Asea Brown Boveri-Combustion Engineering (ABB-CE), in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff`s review of the changes to the System 80+ design documentation since the issuance of the FSER. ABB-CE made thesemore » changes as a result of its review of the System 80+ design details. The NRC staff concludes that the changes to the System 80+ design documentation are acceptable, and that ABB-CE`s application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the System 80+ design.« less

Compilation of Trade Studies for the Constellation Program Extravehicular Activity Spacesuit Power System

NASA Technical Reports Server (NTRS)

Fincannon, James

2009-01-01

This compilation of trade studies performed from 2005 to 2006 addressed a number of power system design issues for the Constellation Program Extravehicular Activity Spacesuit. Spacesuits were required for spacewalks and in-space activities as well as lunar and Mars surface operations. The trades documented here considered whether solar power was feasible for spacesuits, whether spacesuit power generation should be a distributed or a centralized function, whether self-powered in-space spacesuits were better than umbilically powered ones, and whether the suit power system should be recharged in place or replaced.

Validation Methods Research for Fault-Tolerant Avionics and Control Systems: Working Group Meeting, 2

NASA Technical Reports Server (NTRS)

Gault, J. W. (Editor); Trivedi, K. S. (Editor); Clary, J. B. (Editor)

1980-01-01

The validation process comprises the activities required to insure the agreement of system realization with system specification. A preliminary validation methodology for fault tolerant systems documented. A general framework for a validation methodology is presented along with a set of specific tasks intended for the validation of two specimen system, SIFT and FTMP. Two major areas of research are identified. First, are those activities required to support the ongoing development of the validation process itself, and second, are those activities required to support the design, development, and understanding of fault tolerant systems.

Eliciting and characterizing students' mental models within the context of engineering design

NASA Astrophysics Data System (ADS)

Dankenbring, Chelsey

Recently, science education reform documents have called for the incorporation of engineering principles and practices into the K-12 science standards and curriculum. One way this has been done is through the use of engineering design tasks as a way for students to apply their scientific understandings to real-world problems. However, minimal studies have documented students' conceptions within the context of engineering design. Thus, the first chapter of this thesis outlines the steps taken to develop a draw-and-explain item that elicited students' mental models regarding the cause of the four seasons after finishing an engineering design task. Students' mental models regarding the reason for the seasons are also described. The second chapter characterizes students' conceptions regarding sun-Earth relationships, specifically the amount of daylight hours throughout the year, for students who completed either an engineering design task or more traditional learning activities. Results from these studies indicate that draw-and-explain items are an effective way of obtaining students' mental models and that students harbor a variety of alternate conceptions on astronomy related concepts within various learning contexts. Implications from this study include the need for further research regarding how engineering design is used in the classroom and how engineering design facilitates science learning. Also, professional development that allows in-service teachers to gain experience teaching engineering design is needed, as are teacher preparation programs that expose pre-service teachers to engineering design.

Boron-Coated Straw Collar for Uranium Neutron Coincidence Collar Replacement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Jianwei; Croft, Stephen; McElroy, Robert Dennis

The objective of this project was to design and optimize, in simulation space, an active neutron coincidence counter (or collar) using boron-coated straws (BCSs) as a non- 3He replacement to the Uranium Neutron Coincidence Collar (UNCL). UNCL has been used by the International Atomic Energy Agency (IAEA) and European Atomic Energy Community (Euratom) since the 1980s to verify the 235U content in fresh light water reactor fuel assemblies for safeguards purposes. This report documents the design and optimization of the BCS collar.

Summary of Planned Implementation for the HTGR Lessons Learned Applicable to the NGNP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ian Mckirdy

2011-09-01

This document presents a reconciliation of the lessons learned during a 2010 comprehensive evaluation of pertinent lessons learned from past and present high temperature gas-cooled reactors that apply to the Next Generation Nuclear Plant Project along with current and planned activities. The data used are from the latest Idaho National Laboratory research and development plans, the conceptual design report from General Atomics, and the pebble bed reactor technology readiness study from AREVA. Only those lessons related to the structures, systems, and components of the Next Generation Nuclear Plant (NGNP), as documented in the recently updated lessons learned report are addressed.more » These reconciliations are ordered according to plant area, followed by the affected system, subsystem, or component; lesson learned; and finally an NGNP implementation statement. This report (1) provides cross references to the original lessons learned document, (2) describes the lesson learned, (3) provides the current NGNP implementation status with design data needs associated with the lesson learned, (4) identifies the research and development being performed related to the lesson learned, and (5) summarizes with a status of how the lesson learned has been addressed by the NGNP Project.« less

Software Manuals: Where Instructional Design and Technical Writing Join Forces.

ERIC Educational Resources Information Center

Thurston, Walter, Ed.

1986-01-01

Presents highlights from a panel discussion by well known San Francisco Bay area documentation writers, instructional designers, and human performance technologists. Three issues on user performance and documentation are addressed: whether people avoid reading user manuals and why; major human factors influencing documentation use; and…

A Review of Advanced Sewer System Design Technologies (WERF Report INFR4SG09d)

EPA Science Inventory

Abstract: This document seeks to collect into one place current and new technologies about sewerage system design. The document organizes the information found in the 295 documents that were reviewed into six subject areas: Advanced Onsite Technologies; Alternative Wastewater C...

NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes

NASA Technical Reports Server (NTRS)

Smith, David A.; Smith, John V.

2010-01-01

The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Advanced information processing system: The Army Fault-Tolerant Architecture detailed design overview

NASA Technical Reports Server (NTRS)

Harper, Richard E.; Babikyan, Carol A.; Butler, Bryan P.; Clasen, Robert J.; Harris, Chris H.; Lala, Jaynarayan H.; Masotto, Thomas K.; Nagle, Gail A.; Prizant, Mark J.; Treadwell, Steven

1994-01-01

The Army Avionics Research and Development Activity (AVRADA) is pursuing programs that would enable effective and efficient management of large amounts of situational data that occurs during tactical rotorcraft missions. The Computer Aided Low Altitude Night Helicopter Flight Program has identified automated Terrain Following/Terrain Avoidance, Nap of the Earth (TF/TA, NOE) operation as key enabling technology for advanced tactical rotorcraft to enhance mission survivability and mission effectiveness. The processing of critical information at low altitudes with short reaction times is life-critical and mission-critical necessitating an ultra-reliable/high throughput computing platform for dependable service for flight control, fusion of sensor data, route planning, near-field/far-field navigation, and obstacle avoidance operations. To address these needs the Army Fault Tolerant Architecture (AFTA) is being designed and developed. This computer system is based upon the Fault Tolerant Parallel Processor (FTPP) developed by Charles Stark Draper Labs (CSDL). AFTA is hard real-time, Byzantine, fault-tolerant parallel processor which is programmed in the ADA language. This document describes the results of the Detailed Design (Phase 2 and 3 of a 3-year project) of the AFTA development. This document contains detailed descriptions of the program objectives, the TF/TA NOE application requirements, architecture, hardware design, operating systems design, systems performance measurements and analytical models.

Design and implementation of a Windows NT network to support CNC activities

NASA Technical Reports Server (NTRS)

Shearrow, C. A.

1996-01-01

The Manufacturing, Materials, & Processes Technology Division is undergoing dramatic changes to bring it's manufacturing practices current with today's technological revolution. The Division is developing Computer Automated Design and Computer Automated Manufacturing (CAD/CAM) abilities. The development of resource tracking is underway in the form of an accounting software package called Infisy. These two efforts will bring the division into the 1980's in relationship to manufacturing processes. Computer Integrated Manufacturing (CIM) is the final phase of change to be implemented. This document is a qualitative study and application of a CIM application capable of finishing the changes necessary to bring the manufacturing practices into the 1990's. The documentation provided in this qualitative research effort includes discovery of the current status of manufacturing in the Manufacturing, Materials, & Processes Technology Division including the software, hardware, network and mode of operation. The proposed direction of research included a network design, computers to be used, software to be used, machine to computer connections, estimate a timeline for implementation, and a cost estimate. Recommendation for the division's improvement include action to be taken, software to utilize, and computer configurations.

Validation of the Activities of Community Transportation model for individuals with cognitive impairments.

PubMed

Sohlberg, McKay Moore; Fickas, Stephen; Lemoncello, Rik; Hung, Pei-Fang

2009-01-01

To develop a theoretical, functional model of community navigation for individuals with cognitive impairments: the Activities of Community Transportation (ACTs). Iterative design using qualitative methods (i.e. document review, focus groups and observations). Four agencies providing travel training to adults with cognitive impairments in the USA participated in the validation study. A thorough document review and series of focus groups led to the development of a comprehensive model (ACTs Wheels) delineating the requisite steps and skills for community navigation. The model was validated and updated based on observations of 395 actual trips by travellers with navigational challenges from the four participating agencies. Results revealed that the 'ACTs Wheel' models were complete and comprehensive. The 'ACTs Wheels' represent a comprehensive model of the steps needed to navigate to destinations using paratransit and fixed-route public transportation systems for travellers with cognitive impairments. Suggestions are made for future investigations of community transportation for this population.

Standards for Environmental Measurement Using GIS: Toward a Protocol for Protocols.

PubMed

Forsyth, Ann; Schmitz, Kathryn H; Oakes, Michael; Zimmerman, Jason; Koepp, Joel

2006-02-01

Interdisciplinary research regarding how the built environment influences physical activity has recently increased. Many research projects conducted jointly by public health and environmental design professionals are using geographic information systems (GIS) to objectively measure the built environment. Numerous methodological issues remain, however, and environmental measurements have not been well documented with accepted, common definitions of valid, reliable variables. This paper proposes how to create and document standardized definitions for measures of environmental variables using GIS with the ultimate goal of developing reliable, valid measures. Inherent problems with software and data that hamper environmental measurement can be offset by protocols combining clear conceptual bases with detailed measurement instructions. Examples demonstrate how protocols can more clearly translate concepts into specific measurement. This paper provides a model for developing protocols to allow high quality comparative research on relationships between the environment and physical activity and other outcomes of public health interest.

Basic Hitchhiker Payload Requirements

NASA Technical Reports Server (NTRS)

Horan, Stephen

1999-01-01

This document lists the requirements for the NMSU Hitchhiker experiment payload that were developed as part of the EE 498/499 Capstone Design class during the 1999-2000 academic year. This document is used to describe the system needs as described in the mission document. The requirements listed here are those primarily used to generate the basic electronic and data processing requirements developed in the class design document. The needs of the experiment components are more fully described in the draft NASA hitchhiker customer requirements document. Many of the details for the overall payload are given in full detail in the NASA hitchhiker documentation.

Automatic system for computer program documentation

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Elliott, R. W.; Arseven, S.; Colunga, D.

1972-01-01

Work done on a project to design an automatic system for computer program documentation aids was made to determine what existing programs could be used effectively to document computer programs. Results of the study are included in the form of an extensive bibliography and working papers on appropriate operating systems, text editors, program editors, data structures, standards, decision tables, flowchart systems, and proprietary documentation aids. The preliminary design for an automated documentation system is also included. An actual program has been documented in detail to demonstrate the types of output that can be produced by the proposed system.

Internet-Related Work Activities and Academic Government Documents Librarians' Professional Relationships.

ERIC Educational Resources Information Center

Roselle, Ann

1999-01-01

Examines specific Internet-related work activities of academic government documents librarians in the United States and how these activities are affecting academic government documents librarians' professional relationships. Results are reported from a national survey of 226 academic government documents librarians that indicate closer…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiradani, Tiradani,Anthony; Altunay, Mine; Dagenhart, David

The Decision Engine is a critical component of the HEP Cloud Facility. It provides the functionality of resource scheduling for disparate resource providers, including those which may have a cost or a restricted allocation of cycles. Along with the architecture, design, and requirements for the Decision Engine, this document will provide the rationale and explanations for various design decisions. In some cases, requirements and interfaces for a limited subset of external services will be included in this document. This document is intended to be a high level design. The design represented in this document is not complete and does notmore » break everything down in detail. The class structures and pseudo-code exist for example purposes to illustrate desired behaviors, and as such, should not be taken literally. The protocols and behaviors are the important items to take from this document. This project is still in prototyping mode so flaws and inconsistencies may exist and should be noted and treated as failures.« less

Photovoltaic tests and applications project

NASA Technical Reports Server (NTRS)

1978-01-01

The activities and accomplishments of the Photovoltaic Tests and Applications Project during the period April 1976 through June 1977 are summarized. Results of efforts to identify potential near-term photovoltaic applications and users are discussed, including the outcome of an extensive survey of Federal government agencies. The status of application experiments is presented. Various general engineering efforts are reported, including the design and construction of a photovoltaic Systems Test Facility. Efforts to develop a high efficiency 10 kVA self-commutated inverter and controller specifically designed for photovoltaic systems are also discussed. The results of a wide variety of activities in the area of photovoltaic measurements and standards are related. Documents generated by the Project during the reporting period are listed in an Appendix.

Knowledge Construction and Knowledge Representation in High School Students' Design of Hypermedia Documents

ERIC Educational Resources Information Center

Chen, Pearl; McGrath, Diane

2003-01-01

This study documented the processes of knowledge construction and knowledge representation in high school students' hypermedia design projects. Analysis of knowledge construction in linking and structural building yielded distinct types and subtypes of hypermedia documents, which were characterized by four features of knowledge representation: (a)…

76 FR 82079 - AP1000 Design Certification Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... reference Revision 15 of the design control document (DCD) (ADAMS Accession No. ML053460400), which... to DAC in the areas of piping design (Chapter 3), instrumentation and control (I&C) systems (Chapter... Systems Manual, as described in the AP1000 Design Control Document, Revision 17, meets the criteria of...

Demonstration of Active Combustion Control

NASA Technical Reports Server (NTRS)

Lovett, Jeffrey A.; Teerlinck, Karen A.; Cohen, Jeffrey M.

2008-01-01

The primary objective of this effort was to demonstrate active control of combustion instabilities in a direct-injection gas turbine combustor that accurately simulates engine operating conditions and reproduces an engine-type instability. This report documents the second phase of a two-phase effort. The first phase involved the analysis of an instability observed in a developmental aeroengine and the design of a single-nozzle test rig to replicate that phenomenon. This was successfully completed in 2001 and is documented in the Phase I report. This second phase was directed toward demonstration of active control strategies to mitigate this instability and thereby demonstrate the viability of active control for aircraft engine combustors. This involved development of high-speed actuator technology, testing and analysis of how the actuation system was integrated with the combustion system, control algorithm development, and demonstration testing in the single-nozzle test rig. A 30 percent reduction in the amplitude of the high-frequency (570 Hz) instability was achieved using actuation systems and control algorithms developed within this effort. Even larger reductions were shown with a low-frequency (270 Hz) instability. This represents a unique achievement in the development and practical demonstration of active combustion control systems for gas turbine applications.

32 CFR 202.11 - Documenting RAB activities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Documenting RAB activities. 202.11 Section 202.11 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS RESTORATION ADVISORY BOARDS Operating Requirements § 202.11 Documenting RAB activities. (a) The installation shall document information...

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

Using CASE tools to write engineering specifications

NASA Astrophysics Data System (ADS)

Henry, James E.; Howard, Robert W.; Iveland, Scott T.

1993-08-01

There are always a wide variety of obstacles to writing and maintaining engineering documentation. To combat these problems, documentation generation can be linked to the process of engineering development. The same graphics and communication tools used for structured system analysis and design (SSA/SSD) also form the basis for the documentation. The goal is to build a living document, such that as an engineering design changes, the documentation will `automatically' revise. `Automatic' is qualified by the need to maintain textual descriptions associated with the SSA/SSD graphics, and the need to generate new documents. This paper describes a methodology and a computer aided system engineering toolset that enables a relatively seamless transition into document generation for the development engineering team.

SLUDGE TREATMENT PROJECT KOP CONCEPTUAL DESIGN CONTROL DECISION REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARRO CA

2010-03-09

This control decision addresses the Knock-Out Pot (KOP) Disposition KOP Processing System (KPS) conceptual design. The KPS functions to (1) retrieve KOP material from canisters, (2) remove particles less than 600 {micro}m in size and low density materials from the KOP material, (3) load the KOP material into Multi-Canister Overpack (MCO) baskets, and (4) stage the MCO baskets for subsequent loading into MCOs. Hazard and accident analyses of the KPS conceptual design have been performed to incorporate safety into the design process. The hazard analysis is documented in PRC-STP-00098, Knock-Out Pot Disposition Project Conceptual Design Hazard Analysis. The accident analysismore » is documented in PRC-STP-CN-N-00167, Knock-Out Pot Disposition Sub-Project Canister Over Lift Accident Analysis. Based on the results of these analyses, and analyses performed in support of MCO transportation and MCO processing and storage activities at the Cold Vacuum Drying Facility (CVDF) and Canister Storage Building (CSB), control decision meetings were held to determine the controls required to protect onsite and offsite receptors and facility workers. At the conceptual design stage, these controls are primarily defined by their safety functions. Safety significant structures, systems, and components (SSCs) that could provide the identified safety functions have been selected for the conceptual design. It is anticipated that some safety SSCs identified herein will be reclassified based on hazard and accident analyses performed in support of preliminary and detailed design.« less

Lessons learned from the implementation of clinical messaging systems.

PubMed

Barnes, Mike

2007-10-11

The Regenstrief Institute has designed and implemented two clinical messaging systems over the past six years, both called DOCS4DOCS. These systems receive HL7 messages from data sources and deliver results to clinicians via the web, fax, or as HL7 directed to an EMR. This paper focuses on some of the lessons we have learned, both good and bad. We discuss important issues in clinical messaging including provider mapping, document delivery and duplicate prevention, creating uniform HL7 outbound feeds, user authentication, the problems of allowing Active-X controls, why automatic printing of documents is not important although a frequently requested feature, and assorted other pearls of wisdom we have acquired.

Lessons Learned from the Implementation of Clinical Messaging Systems

PubMed Central

Barnes, Mike

2007-01-01

The Regenstrief Institute has designed and implemented two clinical messaging systems over the past six years, both called DOCS4DOCS®. These systems receive HL7 messages from data sources and deliver results to clinicians via the web, fax, or as HL7 directed to an EMR. This paper focuses on some of the lessons we have learned, both good and bad. We discuss important issues in clinical messaging including provider mapping, document delivery and duplicate prevention, creating uniform HL7 outbound feeds, user authentication, the problems of allowing Active-X controls, why automatic printing of documents is not important although a frequently requested feature, and assorted other pearls of wisdom we have acquired. PMID:18693793

Feasibility Study for Low Drag Acoustic Liners Final Report

NASA Technical Reports Server (NTRS)

Riedel, Brian; Wu, Jackie

2017-01-01

This report documents the design and structural analysis as a final deliverable for the Phase 1 contract activity. Also included is a community noise test plan, which is a key deliverable for Phase 2. Finally, a high-level estimate (Phase 3 deliverable) is provided for the work statement of Phases 2-4, which covers the build of two inlet test articles, planning and execution of a flight test with the test inlets, as well as data analysis and final documentation. The two test inlets will be compared to the production baseline inlet configuration. There is also a plan to test one of the inlets "hardwalled" using speed tape or some other similar tape to block the acoustic perforations.

Overview of International Thermonuclear Experimental Reactor (ITER) engineering design activities*

NASA Astrophysics Data System (ADS)

Shimomura, Y.

1994-05-01

The International Thermonuclear Experimental Reactor (ITER) [International Thermonuclear Experimental Reactor (ITER) (International Atomic Energy Agency, Vienna, 1988), ITER Documentation Series, No. 1] project is a multiphased project, presently proceeding under the auspices of the International Atomic Energy Agency according to the terms of a four-party agreement among the European Atomic Energy Community (EC), the Government of Japan (JA), the Government of the Russian Federation (RF), and the Government of the United States (US), ``the Parties.'' The ITER project is based on the tokamak, a Russian invention, and has since been brought to a high level of development in all major fusion programs in the world. The objective of ITER is to demonstrate the scientific and technological feasibility of fusion energy for peaceful purposes. The ITER design is being developed, with support from the Parties' four Home Teams and is in progress by the Joint Central Team. An overview of ITER Design activities is presented.

Digital Inventory and Documentation of Korea's Important Cultural Properties Using 3D Laser Scanning

NASA Astrophysics Data System (ADS)

Dongseok, K.; Gyesoo, K.; Siro, K.; Eunhwa, K.

2015-08-01

As a country with 11 properties included on the World Heritage List and approximately 12,000 important cultural properties, Korea has been continuously carrying out the inventory and documentation of cultural properties to conserve and manage them since the 1960s. The inventory of cultural properties had been carried out by making and managing a register which recorded basic information mainly on state-designated cultural properties such as their size, quantity, and location. The documentation of cultural properties was also carried out by making measured drawings. However, the inventory and documentation done under the previous analog method had a limit to the information it could provide for the effective conservation and management of cultural properties. Moreover, in recent times important cultural properties have frequently been damaged by man-made and natural disasters such as arson, forest fires, and floods, so an alternative was required. Accordingly, Korea actively introduced digital techniques led by the government for the inventory and documentation of important cultural properties. In this process, the government established the concept of a digital set, built a more efficie nt integrated data management system, and created standardized guidelines to maximize the effectiveness of data acquisition, management, and utilization that greatly increased the level of digital inventory, documentation, and archiving.

Methods and means used in programming intelligent searches of technical documents

NASA Technical Reports Server (NTRS)

Gross, David L.

1993-01-01

In order to meet the data research requirements of the Safety, Reliability & Quality Assurance activities at Kennedy Space Center (KSC), a new computer search method for technical data documents was developed. By their very nature, technical documents are partially encrypted because of the author's use of acronyms, abbreviations, and shortcut notations. This problem of computerized searching is compounded at KSC by the volume of documentation that is produced during normal Space Shuttle operations. The Centralized Document Database (CDD) is designed to solve this problem. It provides a common interface to an unlimited number of files of various sizes, with the capability to perform any diversified types and levels of data searches. The heart of the CDD is the nature and capability of its search algorithms. The most complex form of search that the program uses is with the use of a domain-specific database of acronyms, abbreviations, synonyms, and word frequency tables. This database, along with basic sentence parsing, is used to convert a request for information into a relational network. This network is used as a filter on the original document file to determine the most likely locations for the data requested. This type of search will locate information that traditional techniques, (i.e., Boolean structured key-word searching), would not find.

Integrated Baseline System (IBS), Version 1. 03. [Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

Technical Readiness and Gaps Analysis of Commercial Optical Materials and Measurement Systems for Advanced Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anheier, Norman C.; Suter, Jonathan D.; Qiao, Hong

2013-08-06

This report intends to support Department of Energy’s Office of Nuclear Energy (DOE-NE) Nuclear Energy Research and Development Roadmap and industry stakeholders by evaluating optical-based instrumentation and control (I&C) concepts for advanced small modular reactor (AdvSMR) applications. These advanced designs will require innovative thinking in terms of engineering approaches, materials integration, and I&C concepts to realize their eventual viability and deployability. The primary goals of this report include: 1. Establish preliminary I&C needs, performance requirements, and possible gaps for AdvSMR designs based on best available published design data. 2. Document commercial off-the-shelf (COTS) optical sensors, components, and materials in termsmore » of their technical readiness to support essential AdvSMR in-vessel I&C systems. 3. Identify technology gaps by comparing the in-vessel monitoring requirements and environmental constraints to COTS optical sensor and materials performance specifications. 4. Outline a future research, development, and demonstration (RD&D) program plan that addresses these gaps and develops optical-based I&C systems that enhance the viability of future AdvSMR designs. The development of clean, affordable, safe, and proliferation-resistant nuclear power is a key goal that is documented in the Nuclear Energy Research and Development Roadmap. This roadmap outlines RD&D activities intended to overcome technical, economic, and other barriers, which currently limit advances in nuclear energy. These activities will ensure that nuclear energy remains a viable component to this nation’s energy security.« less

Cognitive Process as a Basis for Intelligent Retrieval Systems Design.

ERIC Educational Resources Information Center

Chen, Hsinchun; Dhar, Vasant

1991-01-01

Two studies of the cognitive processes involved in online document-based information retrieval were conducted. These studies led to the development of five computational models of online document retrieval which were incorporated into the design of an "intelligent" document-based retrieval system. Both the system and the broader implications of…

A study on design and development of enterprise-wide concepts for clinical documentation templates.

PubMed

Zhou, Li; Gurjar, Rupali; Regier, Rachel; Morgan, Stephen; Meyer, Theresa; Aroy, Teal; Goldman, Debora Scavone; Hongsermeier, Tonya; Middleton, Blackford

2008-11-06

Structured clinical documents are associated with many potential benefits. Underlying terminologies and structure of information are keys to their successful implementation and use. This paper presents a methodology for design and development of enterprise-wide concepts for clinical documentation templates for an ambulatory Electronic Medical Record (EMR) system.

42 CFR 137.360 - Does the Secretary approve project planning and design documents prepared by the Self-Governance...

Code of Federal Regulations, 2010 CFR

2010-10-01

... design documents prepared by the Self-Governance Tribe? 137.360 Section 137.360 Public Health PUBLIC... HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in Establishing and... documents prepared by the Self-Governance Tribe? The Secretary shall have at least one opportunity to...

International Symposium on Services for Young Disabled Children, Their Parents, and Families. Proceedings: Discussions and Implications for Future Activities (Washington, D.C., December 6-11, 1981).

ERIC Educational Resources Information Center

Research Assessment Management, Inc., Silver Spring, MD.

The document reports on a symposium, sponsored by UNESCO (United Nations Educational, Cultural and Scientific Organization), designed to develop strategies for improving educational, health, and social service to handicapped children and their families, particularly in developing nations. Section 1 is an overview of the background and organization…

A Module-Based Approach to Foster and Document the Intercultural Process before and during the Residence Abroad

ERIC Educational Resources Information Center

Penman, C.; Ratz, S.

2015-01-01

This article contributes to the debate on what form of preparation and support can enhance the intercultural student experience during a Year Abroad. It presents a credit-bearing and multi-modal module at a UK university designed to both prepare students prior to departure through a series of workshops and activities on an e-portfolio and help…

Determining the Appropriateness of Visual Based Activities in the Primary School Books for Low Vision Students

ERIC Educational Resources Information Center

Cakmak, Salih; Yilmaz, Hatice Cansu; Isitan, Hacer Damlanur

2017-01-01

The general aim of this research is to try to determine the appropriateness of the visuals in the primary school Turkish workbooks for the students with low visibility in terms of visual design elements. In the realization of the work, the document review method was used. In this study, purposive sampling method was used in the selection of…

Development of a Hand Held Thromboelastograph

DTIC Science & Technology

2015-01-01

documents will be referenced during the Entegrion PCM System design, verification and validation activities. EN 61010 -1:2010 (Edition3.0) Safety...requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements. EN 61010 -2-101:2002 Safety...IPC-A-610E Acceptability of Electronic Assemblies IPC 7711/21B Rework, Modification and Repair of Electronic Assemblies. IEC 62304:2006/AC:2008

High power arcjet

NASA Technical Reports Server (NTRS)

Auweter-Kurtz, M.; Glocker, B.; Goelz, T. M.; Habiger, H.; Kurtz, H. L.; Schrade, H. O.; Wegmann, T.

1990-01-01

The activities on the development of the high power arc jet HIPARC, the thrust balance, and plasma diagnostic probes are discussed. Modifications of the HIPARC design and a synopsis of the materials used are given. Further experimental results with the TT30 thruster in the 50 kW range are presented. Some first calibration measurements of the thrust balance are also included. Progress concerning the development of plasma diagnostic devices is documented.

Environmental Assessment of the General Plan and Maintenance of Patrick Air Force Base, Florida

DTIC Science & Technology

2012-07-17

water consumption . Per the National Energy Conservation Policy Act, sustainable design principles and life-cycle cost- effective technologies will...attached EA concluded that no significant adverse effects will result. No significant adverse cumulative impacts will result from activities associated...resources will be considered an adverse effect , however, sufficient documentation had been received for Facilities 1322, 1327, 1330, 1425, 1432, 1437 and

Solving the Problems of Designing and Teaching a Packed English for Specific Purposes Course

ERIC Educational Resources Information Center

Ho, Belinda

2011-01-01

Background: In an English for Specific Purposes (ESP) course offered to a department in a university in Hong Kong preparing the students for their internship, students were expected to learn to write and engage in spoken activities related to a number of documents over a period of 13 weeks. Having to achieve so many learning outcomes within so…

Success and Challenges of a Community Healthy Lifestyles Intervention in Merseyside (UK) to Target Families at Risk from Coronary Heart Disease

ERIC Educational Resources Information Center

Peerbhoy, D.; Majumdar, A. J.; Wightman, N. A.; Brand, V. L.

2008-01-01

Objective: To document the lifestyle health impacts (activity, diet and physiological), along with the operational success and challenges, of a programme for families presenting one or more coronary heart disease (CHD) risk factor. Design: Data are based on a wider evaluation of a government-funded community initiative conducted in a deprived area…

Cost prediction model for various payloads and instruments for the Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Hoffman, F. E.

1984-01-01

The following cost parameters of the space shuttle were undertaken: (1) to develop a cost prediction model for various payload classes of instruments and experiments for the Space Shuttle Orbiter; and (2) to show the implications of various payload classes on the cost of: reliability analysis, quality assurance, environmental design requirements, documentation, parts selection, and other reliability enhancing activities.

Methods and costs associated with outfitting light aircraft for remote sensing applications

NASA Technical Reports Server (NTRS)

Rhodes, O. L.; Zetka, E. F.

1973-01-01

This document was designed to provide the potential user of a light aircraft remote sensor platform/data gathering system with general information on aircraft definition, implementation complexity, costs, scheduling and operational factors involved in this type of activity. Most of the subject material was developed from actual situations and problem areas encountered during the build-up cycle and early phases of flight operations.

Coping in the World of Work. Practice in Problem Solving. Masters, Handouts and Transparencies. Research and Development Series No. 120C.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational Education.

Master handouts and transparencies needed for activities and instruction are contained in this document, which is part of a career development unit on coping in the world of work designed to assist students in developing coping strategies to deal with work entry and job adjustment problems. (Other components of the unit--instructor's handbook,…

SLS-SPEC-159 Cross-Program Design Specification for Natural Environments (DSNE) Revision D

NASA Technical Reports Server (NTRS)

Roberts, Barry C.

2015-01-01

This document is derived from the former National Aeronautics and Space Administration (NASA) Constellation Program (CxP) document CxP 70023, titled "The Design Specification for Natural Environments (DSNE), Revision C." The original document has been modified to represent updated Design Reference Missions (DRMs) for the NASA Exploration Systems Development (ESD) Programs. The DSNE completes environment-related specifications for architecture, system-level, and lower-tier documents by specifying the ranges of environmental conditions that must be accounted for by NASA ESD Programs. To assure clarity and consistency, and to prevent requirements documents from becoming cluttered with extensive amounts of technical material, natural environment specifications have been compiled into this document. The intent is to keep a unified specification for natural environments that each Program calls out for appropriate application. This document defines the natural environments parameter limits (maximum and minimum values, energy spectra, or precise model inputs, assumptions, model options, etc.), for all ESD Programs. These environments are developed by the NASA Marshall Space Flight Center (MSFC) Natural Environments Branch (MSFC organization code: EV44). Many of the parameter limits are based on experience with previous programs, such as the Space Shuttle Program. The parameter limits contain no margin and are meant to be evaluated individually to ensure they are reasonable (i.e., do not apply unrealistic extreme-on-extreme conditions). The natural environments specifications in this document should be accounted for by robust design of the flight vehicle and support systems. However, it is understood that in some cases the Programs will find it more effective to account for portions of the environment ranges by operational mitigation or acceptance of risk in accordance with an appropriate program risk management plan and/or hazard analysis process. The DSNE is not intended as a definition of operational models or operational constraints, nor is it adequate, alone, for ground facilities which may have additional requirements (for example, building codes and local environmental constraints). "Natural environments," as the term is used here, refers to the environments that are not the result of intended human activity or intervention. It consists of a variety of external environmental factors (most of natural origin and a few of human origin) which impose restrictions or otherwise impact the development or operation of flight vehicles and destination surface systems. These natural environments include the following types of environments: Terrestrial environments at launch, abort, and normal landing sites (winds, temperatures, pressures, surface roughness, sea conditions, etc.); Space environments (ionizing radiation, orbital debris, meteoroids, thermosphere density, plasma, solar, Earth, and lunar-emitted thermal radiation, etc.); Destination environments (Lunar surface and orbital, Mars atmosphere and surface, near Earth asteroids, etc.). Many of the environmental specifications in this document are based on models, data, and environment descriptions contained in the CxP 70044, Constellation Program Natural Environment Definition for Design (NEDD). The NEDD provides additional detailed environment data and model descriptions to support analytical studies for ESD Programs. For background information on specific environments and their effects on spacecraft design and operations, the environment models, and the data used to generate the specifications contained in the DSNE, the reader is referred to the NEDD paragraphs listed in each section of the DSNE. Also, most of the environmental specifications in this document are tied specifically to the ESD DRMs in ESD-10012, Revision B, Exploration Systems Development Concept of Operations (ConOps). Coordination between these environment specifications and the DRMs must be maintained. This document should be compatible with the current ESD DRMs, but updates to the mission definitions and variations in interpretation may require adjustments to the environment specifications.

Deadwood Community Center and Firehall, Deadwood, Oregon. Phase I. Design documentation report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, G. Z.; Kellett, R.; Reynolds, J. S.

1980-01-01

The energy related portions of an architectural design process for a passive solar heating system that directly incorporated the needs, values, and aspirations of the people who will construct and use the buildings are described. The design process and the documentation and evaluation of the final design are presented. (MHR)

School nurses in New Jersey: a quantitative inquiry on roles and responsibilities.

PubMed

Krause-Parello, Cheryl A; Samms, Kimika

2010-07-01

This study examined types of chronic diseases present and nursing procedures administered in school, health promotion and disease prevention efforts, collaborative efforts, perception of school nursing activities, documentation media of school nursing activities, and student academic outcomes. A nonexperimental research design was employed. The sample (N= 63) was practicing school nurses in New Jersey public schools. The increased numbers of students with chronic illnesses in mainstream classrooms have increased the roles and responsibilities of school nurses. School nurses can use the findings as a framework to articulate their roles and responsibilities.

A survey method for characterizing daily life experience: the day reconstruction method.

PubMed

Kahneman, Daniel; Krueger, Alan B; Schkade, David A; Schwarz, Norbert; Stone, Arthur A

2004-12-03

The Day Reconstruction Method (DRM) assesses how people spend their time and how they experience the various activities and settings of their lives, combining features of time-budget measurement and experience sampling. Participants systematically reconstruct their activities and experiences of the preceding day with procedures designed to reduce recall biases. The DRM's utility is shown by documenting close correspondences between the DRM reports of 909 employed women and established results from experience sampling. An analysis of the hedonic treadmill shows the DRM's potential for well-being research.

Skylab thruster attitude control system

NASA Technical Reports Server (NTRS)

Wilmer, G. E., Jr.

1974-01-01

Preflight activities and the Skylab mission support effort for the thruster attitude control system (TACS) are documented. The preflight activities include a description of problems and their solutions encountered in the development, qualification, and flight checkout test programs. Mission support effort is presented as it relates to system performance assessment, real-time problem solving, flight anomalies, and the daily system evaluation. Finally, the detailed flight evaluation is presented for each phase of the mission using system telemetry data. Data assert that the TACS met or exceeded design requirements and fulfilled its assigned mission objectives.

Effects of Document Holder on Postural Neck Muscles Activity among Computer Users: A Preliminary Study.

PubMed

Ambusam, Subramaniam; Omar, Baharudin; Joseph, Leonard; Deepashini, Harithasan

2015-01-01

Computer users are exposed to work related neck disorders due to repetitive movement and static posture for prolonged period. Viewing document and typing simultaneously are one of the contributing factors for neck disorders. This preliminary study was conducted to evaluate the effects of the document holder on the postural neck muscles activity among computer users. Nine healthy participants with pre-defined inclusion and exclusion criteria were recruited for the study. Neck muscles activity were analyzed using the surface electromyography (EMG) in five different document location such as flat right, flat left, flat center, stand right and stand left during a 5 min typing task. The mean and standard deviation results showed a least amount of muscles activity using a document holder compared to without document holder. Nevertheless, the statistical analysis showed no significant differences between the using of a document holder. The effects of document holder on head excursion and neck muscle activity is recommended in clinical neck pain population.

The Paucity Problem: Where Have All the Space Reactor Experiments Gone?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bess, John D.; Marshall, Margaret A.

2016-10-01

The Handbooks of the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) together contain a plethora of documented and evaluated experiments essential in the validation of nuclear data, neutronics codes, and modeling of various nuclear systems. Unfortunately, only a minute selection of handbook data (twelve evaluations) are of actual experimental facilities and mockups designed specifically for space nuclear research. There is a paucity problem, such that the multitude of space nuclear experimental activities performed in the past several decades have yet to be recovered and made available in such detail that themore » international community could benefit from these valuable historical research efforts. Those experiments represent extensive investments in infrastructure, expertise, and cost, as well as constitute significantly valuable resources of data supporting past, present, and future research activities. The ICSBEP and IRPhEP were established to identify and verify comprehensive sets of benchmark data; evaluate the data, including quantification of biases and uncertainties; compile the data and calculations in a standardized format; and formally document the effort into a single source of verified benchmark data. See full abstract in attached document.« less

15 CFR 922.24 - Congressional documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Designation of National Marine Sanctuaries § 922.24 Congressional documents. In designating a National Marine Sanctuary, the Secretary shall prepare and submit to...

Glossary

MedlinePlus

... healthcare A document that designates the person you trust to make medical decisions on your behalf if ... healthcare: a document that designates the person you trust to make medical decisions on your behalf if ...

The effect of electronic health record software design on resident documentation and compliance with evidence-based medicine.

PubMed

Rodriguez Torres, Yasaira; Huang, Jordan; Mihlstin, Melanie; Juzych, Mark S; Kromrei, Heidi; Hwang, Frank S

2017-01-01

This study aimed to determine the role of electronic health record software in resident education by evaluating documentation of 30 elements extracted from the American Academy of Ophthalmology Dry Eye Syndrome Preferred Practice Pattern. The Kresge Eye Institute transitioned to using electronic health record software in June 2013. We evaluated the charts of 331 patients examined in the resident ophthalmology clinic between September 1, 2011, and March 31, 2014, for an initial evaluation for dry eye syndrome. We compared documentation rates for the 30 evidence-based elements between electronic health record chart note templates among the ophthalmology residents. Overall, significant changes in documentation occurred when transitioning to a new version of the electronic health record software with average compliance ranging from 67.4% to 73.6% (p < 0.0005). Electronic Health Record A had high compliance (>90%) in 13 elements while Electronic Health Record B had high compliance (>90%) in 11 elements. The presence of dialog boxes was responsible for significant changes in documentation of adnexa, puncta, proptosis, skin examination, contact lens wear, and smoking exposure. Significant differences in documentation were correlated with electronic health record template design rather than individual resident or residents' year in training. Our results show that electronic health record template design influences documentation across all resident years. Decreased documentation likely results from "mouse click fatigue" as residents had to access multiple dialog boxes to complete documentation. These findings highlight the importance of EHR template design to improve resident documentation and integration of evidence-based medicine into their clinical notes.

International Union of Basic and Clinical Pharmacology. C. Nomenclature and Properties of Calcium-Activated and Sodium-Activated Potassium Channels.

PubMed

Kaczmarek, Leonard K; Aldrich, Richard W; Chandy, K George; Grissmer, Stephan; Wei, Aguan D; Wulff, Heike

2017-01-01

A subset of potassium channels is regulated primarily by changes in the cytoplasmic concentration of ions, including calcium, sodium, chloride, and protons. The eight members of this subfamily were originally all designated as calcium-activated channels. More recent studies have clarified the gating mechanisms for these channels and have documented that not all members are sensitive to calcium. This article describes the molecular relationships between these channels and provides an introduction to their functional properties. It also introduces a new nomenclature that differentiates between calcium- and sodium-activated potassium channels. Copyright © 2016 by The American Society for Pharmacology and Experimental Therapeutics.

High Speed Research Program Structural Acoustics Multi-Year Summary Report

NASA Technical Reports Server (NTRS)

Beier, Theodor H.; Bhat, Waman V.; Rizzi, Stephen A.; Silcox, Richard J.; Simpson, Myles A.

2005-01-01

This report summarizes the work conducted by the Structural Acoustics Integrated Technology Development (ITD) Team under NASA's High Speed Research (HSR) Phase II program from 1993 to 1999. It is intended to serve as a reference for future researchers by documenting the results of the interior noise and sonic fatigue technology development activities conducted during this period. For interior noise, these activities included excitation modeling, structural acoustic response modeling, development of passive treatments and active controls, and prediction of interior noise. For sonic fatigue, these activities included loads prediction, materials characterization, sonic fatigue code development, development of response reduction techniques, and generation of sonic fatigue design requirements. Also included are lessons learned and recommendations for future work.

On the typography of flight-deck documentation

NASA Technical Reports Server (NTRS)

Degani, Asaf

1992-01-01

Many types of paper documentation are employed on the flight-deck. They range from a simple checklist card to a bulky Aircraft Flight Manual (AFM). Some of these documentations have typographical and graphical deficiencies; yet, many cockpit tasks such as conducting checklists, way-point entry, limitations and performance calculations, and many more, require the use of these documents. Moreover, during emergency and abnormal situations, the flight crews' effectiveness in combating the situation is highly dependent on such documentation; accessing and reading procedures has a significant impact on flight safety. Although flight-deck documentation are an important (and sometimes critical) form of display in the modern cockpit, there is a dearth of information on how to effectively design these displays. The object of this report is to provide a summary of the available literature regarding the design and typographical aspects of printed matter. The report attempts 'to bridge' the gap between basic research about typography, and the kind of information needed by designers of flight-deck documentation. The report focuses on typographical factors such as type-faces, character height, use of lower- and upper-case characters, line length, and spacing. Some graphical aspects such as layout, color coding, fonts, and character contrast are also discussed. In addition, several aspects of cockpit reading conditions such as glare, angular alignment, and paper quality are addressed. Finally, a list of recommendations for the graphical design of flight-deck documentation is provided.

Data to Action

PubMed Central

Rohm Young, Deborah; Johnson, Carolyn C.; Steckler, Allan; Gittelsohn, Joel; Saunders, Ruth P.; Saksvig, Brit I.; Ribisl, Kurt M.; Lytle, Leslie A.; McKenzie, Thomas L.

2008-01-01

Formative research is used to inform intervention development, but the processes of transmitting results to intervention planners and incorporating information into intervention designs are not well documented. The authors describe how formative research results from the Trial of Activity for Adolescent Girls (TAAG) were transferred to planners to guide intervention development. Methods included providing oral and written reports, prioritizing recommendations, and cross-checking recommendations with intervention objectives and implementation strategies. Formative work influenced the intervention in many ways. For example, results indicated that middle schools offered only coeducational physical education and health education classes, so the TAAG intervention was designed to be appropriate for both sexes, and intervention strategies were developed to directly address girls’ stated preferences (e.g., enjoyable activities, opportunity to socialize) and barriers (e.g., lack of skills, fear of injury) for physical activity. The challenges of using formative research for intervention development are discussed. PMID:16397162

40 CFR 265.1090 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... applicable to the facility. Except for air emission control equipment design documentation and information... the operating record for a minimum of 3 years. Air emission control equipment design documentation... explain: How use of the required air emission controls on the tanks would affect the tank design features...

Human Factors Checklist for the Design and Evaluation of Air Traffic Control Systems

DOT National Transportation Integrated Search

1995-04-01

This document presents human factors issues that should bo considered in tho : design and evaluation of air traffic control (ATC! systoms and subsystems. Tho : checklist is a companion document to Human Factors in tho Design and Evaluation of : Air T...

40 CFR 264.1089 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... facility. Except for air emission control equipment design documentation and information required by... record for a minimum of 3 years. Air emission control equipment design documentation shall be maintained... the owner or operator stating that the control device is designed to operate at the performance level...

40 CFR 265.1090 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... applicable to the facility. Except for air emission control equipment design documentation and information... the operating record for a minimum of 3 years. Air emission control equipment design documentation... explain: How use of the required air emission controls on the tanks would affect the tank design features...

40 CFR 264.1089 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... facility. Except for air emission control equipment design documentation and information required by... record for a minimum of 3 years. Air emission control equipment design documentation shall be maintained... the owner or operator stating that the control device is designed to operate at the performance level...

40 CFR 264.1089 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... facility. Except for air emission control equipment design documentation and information required by... record for a minimum of 3 years. Air emission control equipment design documentation shall be maintained... the owner or operator stating that the control device is designed to operate at the performance level...

40 CFR 265.1090 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... applicable to the facility. Except for air emission control equipment design documentation and information... the operating record for a minimum of 3 years. Air emission control equipment design documentation... explain: How use of the required air emission controls on the tanks would affect the tank design features...

What Is an Activity? Appropriating an Activity-Centric System

NASA Astrophysics Data System (ADS)

Yarosh, Svetlana; Matthews, Tara; Moran, Thomas P.; Smith, Barton

Activity-Centric Computing (ACC) systems seek to address the fragmentation of office work across tools and documents by allowing users to organize work around the computational construct of an Activity. Defining and structuring appropriate Activities within a system poses a challenge for users that must be overcome in order to benefit from ACC support. We know little about how knowledge workers appropriate the Activity construct. To address this, we studied users’ appropriation of a production-quality ACC system, Lotus Activities, for everyday work by employees in a large corporation. We contribute to a better understanding of how users articulate their individual and collaborative work in the system by providing empirical evidence of their patterns of appropriation. We conclude by discussing how our findings can inform the design of other ACC systems for the workplace.

The Nature of the Arguments for Creationism, Intelligent Design, and Evolution

ERIC Educational Resources Information Center

Barnes, Ralph M.; Church, Rebecca A.; Draznin-Nagy, Samuel

2017-01-01

Seventy-two Internet documents promoting creationism, intelligent design (I.D.), or evolution were selected for analysis. The primary goal of each of the 72 documents was to present arguments for creationism, I.D., or evolution. We first identified all arguments in these documents. Each argument was then coded in terms of both argument type…

US Army Research Laboratory Visualization Framework Architecture Document

DTIC Science & Technology

2018-01-11

this report are not to be construed as an official Department of the Army position unless so designated by other authorized documents. Citation of...release; distribution is unlimited. 14. ABSTRACT Visualization of network science experimentation results is generally achieved using stovepipe...report documents the ARL Visualization Framework system design and specific details of its implementation. 15. SUBJECT TERMS visualization

Technical Assistance and Training from the Document Design Project. Final Report.

ERIC Educational Resources Information Center

American Institutes for Research, Washington, DC.

Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…

Issues in Designing a Hypermedia Document System: The Intermedia Case Study.

ERIC Educational Resources Information Center

Yankelovich, Nicole; And Others

1986-01-01

Intermedia, a hypermedia system developed at Brown University's Institute for Research (Rhode Island) in Information and Scholarship, is first described, and then used as a case study to explore a number of key issues that software designers must consider in the development of hypermedia document systems. A hypermedia document system is defined as…

Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

CROWE, R.D.; PIEPHO, M.G.

2000-03-23

This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

Cold Vacuum Drying facility civil structural system design description (SYS 06)

DOE Office of Scientific and Technical Information (OSTI.GOV)

PITKOFF, C.C.

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

36 CFR 218.25 - Comments on proposed projects and activities.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Comments on a proposed project or activity to be documented in an environmental assessment shall be...) Comments on a proposed project or activity to be documented in an environmental impact statement shall be... proposed project or activity to be documented with an environmental assessment shall not be extended. (2...

36 CFR 218.25 - Comments on proposed projects and activities.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Comments on a proposed project or activity to be documented in an environmental assessment shall be...) Comments on a proposed project or activity to be documented in an environmental impact statement shall be... proposed project or activity to be documented with an environmental assessment shall not be extended. (2...

Detailed Design Documentation, without the Pain

NASA Astrophysics Data System (ADS)

Ramsay, C. D.; Parkes, S.

2004-06-01

Producing detailed forms of design documentation, such as pseudocode and structured flowcharts, to describe the procedures of a software system:(1) allows software developers to model and discuss their understanding of a problem and the design of a solution free from the syntax of a programming language,(2) facilitates deeper involvement of non-technical stakeholders, such as the customer or project managers, whose influence ensures the quality, correctness and timeliness of the resulting system,(3) forms comprehensive documentation of the system for its future maintenance, reuse and/or redeployment.However, such forms of documentation require effort to create and maintain.This paper describes a software tool which is currently being developed within the Space Systems Research Group at the University of Dundee which aims to improve the utility of, and the incentive for, creating detailed design documentation for the procedures of a software system. The rationale for creating such a tool is briefly discussed, followed by a description of the tool itself, a summary of its perceived benefits, and plans for future work.

Air and smear sample calculational tool for Fluor Hanford Radiological control

DOE Office of Scientific and Technical Information (OSTI.GOV)

BAUMANN, B.L.

2003-07-11

A spreadsheet calculation tool was developed to automate the calculations performed for determining the concentration of airborne radioactivity and smear counting as outlined in HNF-13536, Section 5.2.7, ''Analyzing Air and Smear Samples''. This document reports on the design and testing of the calculation tool. Radiological Control Technicians (RCTs) will save time and reduce hand written and calculation errors by using an electronic form for documenting and calculating work place air samples. Current expectations are RCTs will perform an air sample and collect the filter or perform a smear for surface contamination. RCTs will then survey the filter for gross alphamore » and beta/gamma radioactivity and with the gross counts utilize either hand calculation method or a calculator to determine activity on the filter. The electronic form will allow the RCT with a few key strokes to document the individual's name, payroll, gross counts, instrument identifiers; produce an error free record. This productivity gain is realized by the enhanced ability to perform mathematical calculations electronically (reducing errors) and at the same time, documenting the air sample.« less

Smart roadside initiative : system design document.

DOT National Transportation Integrated Search

2015-09-01

This document describes the software design for the Smart Roadside Initiative (SRI) for the delivery of capabilities related to wireless roadside inspections, electronic screening/virtual weigh stations, universal electronic commercial vehicle identi...

STORMWATER BEST MANAGEMENT PRACTICES DESIGN GUIDE VOLUME 2 - VEGETATIVE BIOFILTERS

EPA Science Inventory

This document is Volume 2 of a three volume document that provides guidance on the selection and design of stormwater management Best Management Practices (BMPs). This second volume provides specific design guidance for a group of onsite BMP control practices that are referred t...

77 FR 65706 - Agency Information Collection Activities: Request for the Return of Original Documents, Form...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-30

...-0100] Agency Information Collection Activities: Request for the Return of Original Documents, Form... Collection. (2) Title of the Form/Collection: Request for the Return of Original Documents. (3) Agency form... obtain original document(s) contained in an alien file. (5) An estimate of the total number of...

77 FR 47426 - Agency Information Collection Activities: Request for the Return of Original Documents, Form...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-08

...-0100] Agency Information Collection Activities: Request for the Return of Original Documents, Form.... (2) Title of the Form/Collection: Request for the Return of Original Documents. (3) Agency form... obtain original document(s) contained in an alien file. (5) An estimate of the total number of...

Systematic Documentation: Structures and Tools in a Practice of Communicative Documentation

ERIC Educational Resources Information Center

Alnervik, Karin

2018-01-01

Swedish preschool teachers must systematically document activities in the preschool in order to evaluate the quality of these activities. Pedagogical documentation is one form of documentation that is proposed. The aim of this article is to discuss and create knowledge of structures and tools based on different communicative aspects of pedagogical…

High Burnup Dry Storage Cask Research and Development Project, Final Test Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-02-27

EPRI is leading a project team to develop and implement the first five years of a Test Plan to collect data from a SNF dry storage system containing high burnup fuel.12 The Test Plan defined in this document outlines the data to be collected, and the storage system design, procedures, and licensing necessary to implement the Test Plan.13 The main goals of the proposed test are to provide confirmatory data14 for models, future SNF dry storage cask design, and to support license renewals and new licenses for ISFSIs. To provide data that is most relevant to high burnup fuel inmore » dry storage, the design of the test storage system must mimic real conditions that high burnup SNF experiences during all stages of dry storage: loading, cask drying, inert gas backfilling, and transfer to the ISFSI for multi-year storage.15 Along with other optional modeling, SETs, and SSTs, the data collected in this Test Plan can be used to evaluate the integrity of dry storage systems and the high burnup fuel contained therein over many decades. It should be noted that the Test Plan described in this document discusses essential activities that go beyond the first five years of Test Plan implementation.16 The first five years of the Test Plan include activities up through loading the cask, initiating the data collection, and beginning the long-term storage period at the ISFSI. The Test Plan encompasses the overall project that includes activities that may not be completed until 15 or more years from now, including continued data collection, shipment of the Research Project Cask to a Fuel Examination Facility, opening the cask at the Fuel Examination Facility, and examining the high burnup fuel after the initial storage period.« less

The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

NASA Astrophysics Data System (ADS)

Munro, Rosemary; Lang, Rüdiger; Klaes, Dieter; Poli, Gabriele; Retscher, Christian; Lindstrot, Rasmus; Huckle, Roger; Lacan, Antoine; Grzegorski, Michael; Holdak, Andriy; Kokhanovsky, Alexander; Livschitz, Jakob; Eisinger, Michael

2016-03-01

The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterization activities, in-flight calibration, and level 0 to 1 data processing. The current status of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarizes a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

NASA Astrophysics Data System (ADS)

Munro, R.; Lang, R.; Klaes, D.; Poli, G.; Retscher, C.; Lindstrot, R.; Huckle, R.; Lacan, A.; Grzegorski, M.; Holdak, A.; Kokhanovsky, A.; Livschitz, J.; Eisinger, M.

2015-08-01

The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterisation activities, in-flight calibration, and level 0 to 1 data processing. The quality of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarises a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages (http://www.eumetsat.int) and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

Buried waste integrated demonstration human engineered control station. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-09-01

This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system.

Introduction to United States Public Documents.

ERIC Educational Resources Information Center

Morehead, Joseph

This textbook, designed for use in library school government documents courses, provides an overview of the functions and characteristics of United States public documents. Chapters cover the Government Printing Office, the Superintendent of Documents, the depository library system, administration of documents collections, general guides to…

First incremental buy for Increment 2 of the Space Transportation System (STS)

NASA Technical Reports Server (NTRS)

1989-01-01

Thiokol manufactured and delivered 9 flight motors to KSC on schedule. All test flights were successful. All spent SRMs were recovered. Design, development, manufacture, and delivery of required transportation, handling, and checkout equipment to MSFC and to KSC were completed on schedule. All items of data required by DPD 400 were prepared and delivered as directed. In the system requirements and analysis area, the point of departure from Buy 1 to the operational phase was developed in significant detail with a complete set of transition documentation available. The documentation prepared during the Buy 1 program was maintained and updated where required. The following flight support activities should be continued through other production programs: as-built materials usage tracking on all flight hardware; mass properties reporting for all flight hardware until sample size is large enough to verify that the weight limit requirements were met; ballistic predictions and postflight performance assessments for all production flights; and recovered SRM hardware inspection and anomaly identification. In the safety, reliability, and quality assurance area, activities accomplished were assurance oriented in nature and specifically formulated to prevent problems and hardware failures. The flight program to date has adequately demonstrated the success of this assurance approach. The attention focused on details of design, analysis, manufacture, and inspection to assure the production of high-quality hardware has resulted in the absence of flight failures. The few anomalies which did occur were evaluated, design or manufacturing changes incorporated, and corrective actions taken to preclude recurrence.

An active visual search interface for Medline.

PubMed

Xuan, Weijian; Dai, Manhong; Mirel, Barbara; Wilson, Justin; Athey, Brian; Watson, Stanley J; Meng, Fan

2007-01-01

Searching the Medline database is almost a daily necessity for many biomedical researchers. However, available Medline search solutions are mainly designed for the quick retrieval of a small set of most relevant documents. Because of this search model, they are not suitable for the large-scale exploration of literature and the underlying biomedical conceptual relationships, which are common tasks in the age of high throughput experimental data analysis and cross-discipline research. We try to develop a new Medline exploration approach by incorporating interactive visualization together with powerful grouping, summary, sorting and active external content retrieval functions. Our solution, PubViz, is based on the FLEX platform designed for interactive web applications and its prototype is publicly available at: http://brainarray.mbni.med.umich.edu/Brainarray/DataMining/PubViz.

NLS Flight Simulation Laboratory (FSL) documentation

NASA Technical Reports Server (NTRS)

1995-01-01

The Flight Simulation Laboratory (FSL) Electronic Documentation System design consists of modification and utilization of the MSFC Integrated Engineering System (IES), translation of the existing FSL documentation to an electronic format, and generation of new drawings to represent the Engine Flight Simulation Laboratory design and implementation. The intent of the electronic documentation is to provide ease of access, local print/plot capabilities, as well as the ability to correct and/or modify the stored data by network users who are authorized to access this information.

Wake Turbulence Mitigation for Departures (WTMD) Prototype System - Software Design Document

NASA Technical Reports Server (NTRS)

Sturdy, James L.

2008-01-01

This document describes the software design of a prototype Wake Turbulence Mitigation for Departures (WTMD) system that was evaluated in shadow mode operation at the Saint Louis (KSTL) and Houston (KIAH) airports. This document describes the software that provides the system framework, communications, user displays, and hosts the Wind Forecasting Algorithm (WFA) software developed by the M.I.T. Lincoln Laboratory (MIT-LL). The WFA algorithms and software are described in a separate document produced by MIT-LL.

Monitoring post-fire vegetation rehabilitation projects: A common approach for non-forested ecosystems

USGS Publications Warehouse

Wirth, Troy A.; Pyke, David A.

2007-01-01

Emergency Stabilization and Rehabilitation (ES&R) and Burned Area Emergency Response (BAER) treatments are short-term, high-intensity treatments designed to mitigate the adverse effects of wildfire on public lands. The federal government expends significant resources implementing ES&R and BAER treatments after wildfires; however, recent reviews have found that existing data from monitoring and research are insufficient to evaluate the effects of these activities. The purpose of this report is to: (1) document what monitoring methods are generally used by personnel in the field; (2) describe approaches and methods for post-fire vegetation and soil monitoring documented in agency manuals; (3) determine the common elements of monitoring programs recommended in these manuals; and (4) describe a common monitoring approach to determine the effectiveness of future ES&R and BAER treatments in non-forested regions. Both qualitative and quantitative methods to measure effectiveness of ES&R treatments are used by federal land management agencies. Quantitative methods are used in the field depending on factors such as funding, personnel, and time constraints. There are seven vegetation monitoring manuals produced by the federal government that address monitoring methods for (primarily) vegetation and soil attributes. These methods vary in their objectivity and repeatability. The most repeatable methods are point-intercept, quadrat-based density measurements, gap intercepts, and direct measurement of soil erosion. Additionally, these manuals recommend approaches for designing monitoring programs for the state of ecosystems or the effect of management actions. The elements of a defensible monitoring program applicable to ES&R and BAER projects that most of these manuals have in common are objectives, stratification, control areas, random sampling, data quality, and statistical analysis. The effectiveness of treatments can be determined more accurately if data are gathered using an approach that incorporates these six monitoring program design elements and objectives, as well as repeatable procedures to measure cover, density, gap intercept, and soil erosion within each ecoregion and plant community. Additionally, using a common monitoring program design with comparable methods, consistently documenting results, and creating and maintaining a central database for query and reporting, will ultimately allow a determination of the effectiveness of post-fire rehabilitation activities region-wide.

Human Integration Design Processes (HIDP)

NASA Technical Reports Server (NTRS)

Boyer, Jennifer

2014-01-01

The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference missions. The HIDP is a reference document that is intended to be used during the development of crewed space systems and operations to guide human-systems development process activities.

Shuttle unified navigation filter, revision 1

NASA Technical Reports Server (NTRS)

Muller, E. S., Jr.

1973-01-01

Equations designed to meet the navigation requirements of the separate shuttle mission phases are presented in a series of reports entitled, Space Shuttle GN and C Equation Document. The development of these equations is based on performance studies carried out for each particular mission phase. Although navigation equations have been documented separately for each mission phase, a single unified navigation filter design is embodied in these separate designs. The purpose of this document is to present the shuttle navigation equations in a form in which they would most likely be coded-as the single unified navigation filter used in each mission phase. This document will then serve as a single general reference for the navigation equations replacing each of the individual mission phase navigation documents (which may still be used as a description of a particular navigation phase).

Precise Documentation: The Key to Better Software

NASA Astrophysics Data System (ADS)

Parnas, David Lorge

The prime cause of the sorry “state of the art” in software development is our failure to produce good design documentation. Poor documentation is the cause of many errors and reduces efficiency in every phase of a software product's development and use. Most software developers believe that “documentation” refers to a collection of wordy, unstructured, introductory descriptions, thousands of pages that nobody wanted to write and nobody trusts. In contrast, Engineers in more traditional disciplines think of precise blueprints, circuit diagrams, and mathematical specifications of component properties. Software developers do not know how to produce precise documents for software. Software developments also think that documentation is something written after the software has been developed. In other fields of Engineering much of the documentation is written before and during the development. It represents forethought not afterthought. Among the benefits of better documentation would be: easier reuse of old designs, better communication about requirements, more useful design reviews, easier integration of separately written modules, more effective code inspection, more effective testing, and more efficient corrections and improvements. This paper explains how to produce and use precise software documentation and illustrate the methods with several examples.

Documentation of preventive care for pressure ulcers initiated during annual evaluations in SCI

PubMed Central

2016-01-01

Objective Community-acquired pressure ulcers (PrUs) are a frequent cause of hospitalization of Veterans with spinal cord injury (SCI). The Veterans Health Administration (VHA) recommends that SCI annual evaluations include assessment of PrU risk factors, a thorough skin inspection and sharing of recommendations for PrU prevention strategies. We characterized consistency of preventive skin care during annual evaluations for Veterans with SCI as a first step in identifying strategies to more actively promote PrU prevention care in other healthcare encounters. Design/setting/participants Retrospective cross-sectional observational design, including review of electronic medical records for 206 Veterans with SCI admitted to 2 VA SCI centers from January-December, 2011. Outcome measures Proportion of applicable skin health elements documented (number of applicable elements/skin health elements documented). Results Our sample was primarily white (78%) male (96.1%), and mean age = 61 years. 40% of participants’ were hospitalized for PrU treatment, with a mean of 294 days (median = 345 days) from annual evaluation to the index admission. On average, Veterans received an average of 75.5% (IQR 68-86%) of applicable skin health elements. Documentation of applicable skin health elements was significantly higher during inpatient vs. outpatient annual evaluations (mean elements received = 80.3% and 64.3%, respectively, P > 0.001). No significant differences were observed in documentation of skin health elements by Veterans at high vs. low PrU risk. Conclusion Additional PrU preventive care in the VHA outpatient setting may increase identification and detection of PrU risk factors and early PrU damage for Veterans with SCI in the community, allowing for earlier intervention. PMID:26763668

Evaluation of clinical pharmacy services in a hematology/oncology outpatient setting.

PubMed

Shah, Sachin; Dowell, Jonathan; Greene, Shane

2006-09-01

The Veterans Affairs North Texas Health Care System in Dallas, TX, provides a unique opportunity for clinical pharmacists to work as providers. Even though clinical pharmacists are actively involved in patient care, many of their efforts remain undocumented, resulting in an underestimation of the importance of their services and missed opportunities for improvements and new directions. To document and evaluate the services of a hematology/oncology clinical pharmacy in the outpatient setting. Pendragon Forms 3.2 software was used to design the documentation template. The template was designed to collect diagnoses, supportive care issues, drug-specific interventions, and prescriptions written. This template was uploaded to the personal digital assistant (PDA) for documentation. Patient-specific information was documented in a password-protected PDA. Data collected from November 1, 2002, to October 31, 2003, were retrospectively analyzed. Clinical pharmacists were involved in 423 patient visits for chemotherapy follow-up or disease management. Cancer diagnoses included colorectal (n = 99), multiple myeloma (59), non-small cell lung (56), chronic lymphocytic leukemia (44), myelodysplastic syndromes (22), and chronic myelogenous leukemia (19). During the 423 patient visits, 342 supportive care issues were addressed including anemia (34%), pain management (22%), constipation/diarrhea (15%), and nausea/vomiting (8%). Major drug-specific interventions included drug addition (41%), discontinuation (23%), and adjustment (21%). Four hundred forty-five prescriptions were filled, of which 181 were new and 150 were refilled. This is the first study, as of July 25, 2006, to document considerable contribution of an outpatient clinical pharmacist in direct cancer patient care. Although the disease management and supportive care issues addressed here may differ based on institution and patient population, the results of our study show that clinical pharmacists have ever-growing roles in the management of these patients.

Effects of Cabin Upsets on Adsorption Columns for Air Revitalization

NASA Technical Reports Server (NTRS)

LeVan, M. Douglas

1999-01-01

The National Aeronautics and Space Administration (NASA) utilizes adsorption technology as part of contaminant removal systems designed for long term missions. A variety of trace contaminants can be effectively removed from gas streams by adsorption onto activated carbon. An activated carbon adsorption column meets NASA's requirements of a lightweight and efficient means of controlling trace contaminant levels aboard spacecraft and space stations. The activated carbon bed is part of the Trace Contaminant Control System (TCCS) which is utilized to purify the cabin atmosphere. TCCS designs oversize the adsorption columns to account for irregular fluctuations in cabin atmospheric conditions. Variations in the cabin atmosphere include changes in contaminant concentrations, temperature, and relative humidity. Excessively large deviations from typical conditions can result from unusual crew activity, equipment malfunctions, or even fires. The research carried out under this award focussed in detail on the effects of cabin upsets on the performance of activated carbon adsorption columns. Both experiments and modeling were performed with an emphasis on the roll of a change in relative humidity on adsorption of trace contaminants. A flow through fixed-bed apparatus was constructed at the NASA Ames Research Center, and experiments were performed there by W. Scot Appel under the direction of Dr. John E. Finn. Modeling work was performed at the University of Virginia and at Vanderbilt University by W. Scot Appel under the direction of M. Douglas LeVan. All three participants collaborated in all of the various phases of the research. The most comprehensive document describing the research is the Ph.D. dissertation of W. Scot Appel. Results have been published in several papers and presented in talks at technical conferences. All documents have been transmitted to Dr. John E. Finn.

78 FR 19797 - Designation & Determination Pursuant to the Foreign Missions Act; Concerning the Provision of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... DEPARTMENT OF STATE [Public Notice 8266] Designation & Determination Pursuant to the Foreign Missions Act; Concerning the Provision of Application Services for Visas, Passports and Similar Documents... designate the provision of application services with respect to visas, passports and similar documents by...

Design and Construction Documents Associated with N232, Sustainability Base

NASA Technical Reports Server (NTRS)

Zornetzer, Steven F.; Schuler, Raymond F.; Grymes, Rosalind A.

2014-01-01

This request comprehensively covers documents associated with the design and construction of Sustainability Base, N232. The intent of this project specifically envisioned broad dissemination of these materials to others undertaking the design and construction of high-performing energy- and resource-efficient buildings in comparable climate zones.

Advanced Development of Antiviral Prophylactics and Therapeutics (ADAPT) - Research Area 10

DTIC Science & Technology

2014-11-17

various Prosetta compounds against Rift Valley Fever Virus (RVFV), Lassa virus (LASV) and Marburg virus (MARV), respectively. Activity is demonstrated as...USAMRIID for in vitro efficacy testing against various hemorrhagic fever viruses, including Ebola (EBOV), Marburg (MARV), Lassa (LASV), Rift Valley...unless so designated by other documentation. 14. ABSTRACT The pmpose of the proposed work is to continue the promising anti-hemonhagic fever vims (HFV

Lessons that Bear Repeating and Repeating that Bears Lessons: An Interdisciplinary Unit on Principles of Minimalism in Modern Music, Art, and Poetry (Grades 4-8)

ERIC Educational Resources Information Center

Smigel, Eric; McDonald, Nan L.

2012-01-01

This theory-to-practice article focuses on interdisciplinary classroom activities based on principles of minimalism in modern music, art, and poetry. A lesson sequence was designed for an inner-city Grades 4 and 5 general classroom of English language learners, where the unit was taught, assessed, and documented by the authors. Included in the…

To Strengthen American Cognitive Science for the Twenty-First Century. Report of a Planning Workshop for the Cognitive Science Initiative at the National Science Foundation (Washington, D.C., April 20-21, 1991).

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC.

Cognitive science, the study of both biological and artificial intelligent systems, is an inherently interdisciplinary activity that embraces aspects of psychology, linguistics, artificial intelligence, neuroscience, engineering, and other behavioral and social sciences. This document reports the results of a workshop designed to provide advice to…