Evaluation of a telehealth training package to remotely train staff to conduct a preference assessment.

PubMed

Higgins, William J; Luczynski, Kevin C; Carroll, Regina A; Fisher, Wayne W; Mudford, Oliver C

2017-04-01

Recent advancements in telecommunication technologies make it possible to conduct a variety of healthcare services remotely (e.g., behavioral-analytic intervention services), thereby bridging the gap between qualified providers and consumers in isolated locations. In this study, web-based telehealth technologies were used to remotely train direct-care staff to conduct a multiple-stimulus-without-replacement preference assessment. The training package included three components: (a) a multimedia presentation; (b) descriptive feedback from previously recorded baseline sessions; and (c) scripted role-play with immediate feedback. A nonconcurrent, multiple-baseline-across-participants design was used to demonstrate experimental control. Training resulted in robust and immediate improvements, and these effects maintained during 1- to 2-month follow-up observations. In addition, participants expressed high satisfaction with the web-based materials and the overall remote-training experience. © 2017 Society for the Experimental Analysis of Behavior.

The Effects of Behavioral Skills Training on Implementation of the Picture Exchange Communication System

ERIC Educational Resources Information Center

Rosales, Rocio; Stone, Karen; Rehfeldt, Ruth Anne

2009-01-01

The effectiveness of a behavioral skills training (BST) package to teach the implementation of the first three phases of the picture exchange communication system (PECS) was evaluated with 3 adults who had no history teaching any functional communication system. A multiple baseline design across participants was used to evaluate the effectiveness…

Cognitive-Behavioral Therapy for Comorbid Generalized Anxiety Disorder and Panic Disorder with Agoraphobia

ERIC Educational Resources Information Center

Labrecque, Joane; Dugas, Michel J.; Marchand, Andre; Letarte, Andree

2006-01-01

The goal of this study was to evaluate the efficacy of a cognitive-behavioral treatment package for comorbid generalized anxiety disorder (GAD) and panic disorder with agoraphobia (PDA). A single-case, multiple-baseline, across-subjects design was used with 3 primary GAD patients with secondary PDA. The efficacy of the treatment was evaluated with…

Keeping an Uphill Edge: Managing Cleaning Behaviors at a Ski Shop

ERIC Educational Resources Information Center

Doll, Jessica; Livesey, Josh; McHaffie, Elizabeth; Ludwig, Timothy D.

2007-01-01

Several behaviors in a ski shop were identified as being deficient using Austin's Performance Diagnostic Checklist (2000) and Daniels and Daniels' PIC/NIC Analysis (2004). During a 4-week baseline, 7 cleaning behaviors were monitored and 5 were subsequently targeted in an intervention package using an ABC design. The intervention included: a task…

Assessment-Based Intervention for Severe Behavior Problems in a Natural Family Context.

ERIC Educational Resources Information Center

Vaughn, Bobbie J.; Clarke, Shelley; Dunlap, Glen

1997-01-01

Functional assessments and assessment-based interventions were conducted with an 8-year-old boy with disabilities and severe problem behavior in the context of two family routines: using the home bathroom and dining in a fast-food restaurant. A multiple baseline design demonstrated the effectiveness of the intervention package as implemented by…

Effects of standardised cigarette packaging on craving, motivation to stop and perceptions of cigarettes and packs.

PubMed

Brose, Leonie S; Chong, Chwen B; Aspinall, Emily; Michie, Susan; McEwen, Andy

2014-01-01

To assess whether standardised packs of the form introduced in Australia are associated with a reduction in acute craving and/or an increase in motivation to stop, and to replicate previous findings on perceptions of packaging, perceptions of smokers using it and perceived effects on behaviour. Following abstinence of at least 12 h, 98 regular and occasional smokers were randomised to exposure to their own cigarette package, another branded package or a standardised package. Craving (QSU-brief), motivation to stop, both at baseline and post-exposure. Ratings of 10 attributes concerning package design, perceived smoker characteristics and effects on behaviour, post-exposure only. For craving, a mixed model ANCOVA showed a significant interaction of packaging and time of measurement (F(2,94) = 8.77, p < .001, partial η(2) = .16). There was no significant main effect or interaction for motivation to stop smoking (p = .9). The standardised pack was perceived to be significantly less appealing and less motivating to buy cigarettes, smokers using them were perceived as less popular and cigarettes from them expected to taste worse. Standardised cigarette packaging may reduce acute (hedonic) craving and is associated with more negative perceptions than branded packaging with less prominent health warnings.

The impact of a quality-improvement package on reproductive health services delivered by private providers in Uganda.

PubMed

Agha, Sohail

2010-09-01

This study assesses the effectiveness of a quality-improvement (QI) package designed to enable small-scale commercial reproductive health (RH) service providers to improve the services they offer. The study was conducted among midwives who are members of the Uganda Private Midwives Association. A pretest-post-test quasi-experimental panel study design was used wherein midwife clinics were allocated to two experimental groups and one control group. Baseline and follow-up measurements of structural and process attributes of quality were taken at the clinics by means of a facility inventory, interviews with midwives, and observations of client-provider interactions. Nearly 70 percent of the midwives who were trained to use the package reported that it was easy to use. Among clinics in which midwives received training in the use of the self-assessment tool and in developing action plans, structural and process attributes of quality improved only among those clinics in which the midwives' supervisors received training in finding solutions to the problems identified through self-assessments. The QI package may be implemented with small-scale private providers of RH services who are part of a professional association, network, or franchise that supervises their performance.

The Use of an Autonomous Pedagogical Agent and Automatic Speech Recognition for Teaching Sight Words to Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Saadatzi, Mohammad Nasser; Pennington, Robert C.; Welch, Karla C.; Graham, James H.; Scott, Renee E.

2017-01-01

In the current study, we examined the effects of an instructional package comprised of an autonomous pedagogical agent, automatic speech recognition, and constant time delay during the instruction of reading sight words aloud to young adults with autism spectrum disorder. We used a concurrent multiple baseline across participants design to…

Community care for the Elderly: Needs and Service Use Study (CENSUS): Who receives home care packages and what are the outcomes?

PubMed

Low, Lee-Fay; Fletcher, Jennifer; Gresham, Meredith; Brodaty, Henry

2015-09-01

Investigate factors associated with waiting times for home care packages and outcomes for care recipients and carers. Analyses of data collected every four months for 12 months from 55 community-dwelling older adults eligible for government-subsidised packaged care and their carers. Thirty of fifty-five participants were offered a package; they waited from one to 237 days. Baseline quality of life was higher for those offered a package than those not. Baseline care needs and unmet needs, neuropsychiatric symptoms, and cognitive decline did not predict offers. Package receipt compared to non-package receipt was associated with decreased carer burden over time but did not affect levels of unmet care needs, care needs or quality of life. Being offered a home care package was not based on waiting time or unmet care needs. Reforms should include a transparent system of wait listing and prioritisation. © 2014 ACOTA.

A community randomised controlled trial evaluating a home-based environmental intervention package of improved stoves, solar water disinfection and kitchen sinks in rural Peru: rationale, trial design and baseline findings.

PubMed

Hartinger, S M; Lanata, C F; Hattendorf, J; Gil, A I; Verastegui, H; Ochoa, T; Mäusezahl, D

2011-11-01

Pneumonia and diarrhoea are leading causes of death in children. There is a need to develop effective interventions. We present the design and baseline findings of a community-randomised controlled trial in rural Peru to evaluate the health impact of an Integrated Home-based Intervention Package in children aged 6 to 35 months. We randomised 51 communities. The intervention was developed through a community-participatory approach prior to the trial. They comprised the construction of improved stoves and kitchen sinks, the promotion of hand washing, and solar drinking water disinfection (SODIS). To reduce the potential impact of non-blinding bias, a psychomotor stimulation intervention was implemented in the control arm. The baseline survey included anthropometric and socio-economic characteristics. In a sub-sample we determined the level of faecal contamination of drinking water, hands and kitchen utensils and the prevalence of diarrhoegenic Escherichia coli in stool specimen. We enrolled 534 children. At baseline all households used open fires and 77% had access to piped water supplies. E. coli was found in drinking water in 68% and 64% of the intervention and control households. Diarrhoegenic E. coli strains were isolated from 45/139 stool samples. The proportion of stunted children was 54%. Randomization resulted in comparable study arms. Recently, several critical reviews raised major concerns on the reliability of open health intervention trials, because of uncertain sustainability and non-blinding bias. In this regard, the presented trial featuring objective outcome measures, a simultaneous intervention in the control communities and a 12-month follow up period will provide valuable evidence. Copyright © 2011 Elsevier Inc. All rights reserved.

PEP solar array definition study

NASA Technical Reports Server (NTRS)

1979-01-01

The power extension package (PEP) is a solar array system that will be used on the space transportation system to augment the power of the Orbiter vehicle and to extend the time the vehicle may stay in orbit. The baseline configuration of the PEP is reviewed. The programmatic aspects of the design covering the development plan, the manufacturing facility plan and the estimated costs and risks are presented.

Using Goals, Feedback, Reinforcement, and a Performance Matrix to Improve Customer Service in a Large Department Store

ERIC Educational Resources Information Center

Eikenhout, Nelson; Austin, John

2005-01-01

This study employed an ABAC and multiple baseline design to evaluate the effects of (B) feedback and (C) a package of feedback, goalsetting, and reinforcement (supervisor praise and an area-wide celebration as managed through a performance matrix, on a total of 14 various customer service behaviors for a total of 115 employees at a large…

Applicability of the Remote Mobile Emplacement Package (RMEP) design as a mobility aid for proposed post-84 Mars missions, phase O

NASA Technical Reports Server (NTRS)

1978-01-01

The results of study to determine the applicability of the Remote Mobile Emplacement Package (RMEP) design concept as a mobility aid for the proposed post-'84 Mars missions are presented. The RMEP wheel and mobility subsystem parameters: wheel tire size, weight, stowed volume, and environmental effects; obstacle negotiation; reliability and wear; motor and drive train; and electrical power demand were reviewed. Results indicated that: (1) the basic RMEP wheel design would be satisfactory, with additional attention to heating, side loading, tread wear and ultraviolet radiation protection; (2) motor and drive train power requirements on Mars would be less than on Earth; and (3) the mobility electrical power requirements would be small enough to offer the option of operating the Mars mini rover untethered. Payload power required for certain sampling functions would preclude the use of battery power for these missions. Hazard avoidance and reverse direction maneuvers are discussed. Limited examination of vehicle payload integration and thermal design was made, pending establishment of a baseline vehicle/payload design.

Surveillance and Monitoring Program Full-Scale Experiments to Evaluate the Potential for Corrosion in 3013 Containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narlesky, Joshua Edward; Berg, John M.; Duque, Juan

A set of six long-term, full-scale experiments were initiated to determine the type and extent of corrosion that occurs in 3013 containers packaged with chloride-bearing plutonium oxide materials. The materials were exposed to a high relative humidity environment representative of actual packaging conditions for the materials in storage. The materials were sealed in instrumented, inner 3013 containers with corrosion specimens designed to test the corrosiveness of the environment inside the containers under various conditions. This report focuses on initial loading conditions that are used to establish a baseline to show how the conditions change throughout the storage lifetime of themore » containers.« less

TEACH-M: A pilot study evaluating an instructional sequence for persons with impaired memory and executive functions.

PubMed

Ehlhardt, L A; Sohlberg, M M; Glang, A; Albin, R

2005-08-10

The purpose of this pilot study was to evaluate an instructional package that facilitates learning and retention of multi-step procedures for persons with severe memory and executive function impairments resulting from traumatic brain injury. The study used a multiple baseline across participants design. Four participants, two males and two females, ranging in age from 36-58 years, were taught a 7-step e-mail task. The instructional package (TEACH-M) was the experimental intervention and the number of correct e-mail steps learned was the dependent variable. Treatment effects were replicated across the four participants and maintained at 30 days post-treatment. Generalization and social validity data further supported the treatment programme. The results suggest that individuals with severe cognitive impairments are capable of learning new skills. Directions for future research include application of the instructional package to other multi-step procedures.

Effect of a classroom-based behavioral intervention package on the improvement of children's sitting posture in Japan.

PubMed

Noda, Wataru; Tanaka-Matsumi, Junko

2009-03-01

The present study evaluates the effect of a classroom-based behavioral intervention package to improve Japanese elementary school children's sitting posture in regular classrooms (N=68). This study uses a multiple-baseline design across two classrooms with a modified repeated reversal within each class. The article defines appropriate sitting posture as behavior composed of four components (feet, buttocks, back, and a whole body). The intervention package includes modeling, correspondence training, prompt, and reinforcement, among others. The authors counted the number of children with appropriate sitting posture in each classroom across all 28 sessions throughout the study. Interobserver agreement of appropriate sitting posture ranged from 80% to 100%. As a result of the intervention, the mean proportion of children with appropriate posture increased from approximately 20% to 90%. In addition, their academic writing productivity increased with the improved sitting posture. Teachers' acceptance of the intervention program proved to be excellent.

flexsurv: A Platform for Parametric Survival Modeling in R

PubMed Central

Jackson, Christopher H.

2018-01-01

flexsurv is an R package for fully-parametric modeling of survival data. Any parametric time-to-event distribution may be fitted if the user supplies a probability density or hazard function, and ideally also their cumulative versions. Standard survival distributions are built in, including the three and four-parameter generalized gamma and F distributions. Any parameter of any distribution can be modeled as a linear or log-linear function of covariates. The package also includes the spline model of Royston and Parmar (2002), in which both baseline survival and covariate effects can be arbitrarily flexible parametric functions of time. The main model-fitting function, flexsurvreg, uses the familiar syntax of survreg from the standard survival package (Therneau 2016). Censoring or left-truncation are specified in ‘Surv’ objects. The models are fitted by maximizing the full log-likelihood, and estimates and confidence intervals for any function of the model parameters can be printed or plotted. flexsurv also provides functions for fitting and predicting from fully-parametric multi-state models, and connects with the mstate package (de Wreede, Fiocco, and Putter 2011). This article explains the methods and design principles of the package, giving several worked examples of its use. PMID:29593450

Flight prototype CO2 and humidity control system

NASA Technical Reports Server (NTRS)

Rudy, K. M.

1977-01-01

A regenerable CO2 and humidity control system is presently being developed for potential use on the space shuttle as an alternative to the baseline lithium hydroxide system. The system utilizes a sorbent material (designated HS-C) to adsorb CO2 and water vapor from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum. Continuous operation is achieved by utilizing two beds which are alternately cycled between adsorption and desorption. A shuttle vehicle integration study showed that the HS-C system offers substantial weight advantages compared to the baseline shuttle orbiter expendable lithium hydroxide CO2 removal system for extended missions beyond the nominal design of four men for seven days. This study defined a system packaging envelope in the area presently occupied by the LiOH cartridges.

Designing for action: adapting and implementing a community-based newborn care package to affect national change in Uganda.

PubMed

Waiswa, Peter; Namazzi, Gertrude; Kerber, Kate; Peterson, Stefan

2015-01-01

There is a lack of literature on how to adapt new evidence-based interventions for maternal and newborn care into local health systems and policy for rapid scale-up, particularly for community-based interventions in low-income settings. The Uganda Newborn Study (UNEST) was a cluster randomised control trial to test a community-based care package which was rapidly taken up at national level. Understanding this process may help inform other studies looking to design and evaluate with scale-up in mind. This study aimed to describe the process of using evidence to design a community-based maternal and newborn care package in rural eastern Uganda, and to determine the dissemination and advocacy approaches used to facilitate rapid policy change and national uptake. We reviewed UNEST project literature including meeting reports and minutes, supervision reports, and annual and midterm reports. National stakeholders, project and district staff were interviewed regarding their role in the study and perceptions of what contributed to uptake of the package under evaluation. Data related to UNEST formative research, study design, implementation and policy influence were extracted and analysed. An advisory committee of key players in development of maternal and newborn policies and programmes in Uganda was constituted from many agencies and disciplines. Baseline qualitative and quantitative data collection was done at district, community and facility level to examine applicability of aspects of a proposed newborn care package to the local setting. Data were summarised and presented to stakeholders to adapt the intervention that was ultimately tested. Quarterly monitoring of key activities and events around the interventions were used to further inform implementation. The UNEST training package, home visit schedule and behaviour change counselling materials were incorporated into the national Village Health Team and Integrated Community Case Management packages while the study was ongoing. Designing interventions for national scale-up requires strategies and planning from the outset. Use of evidence alongside engagement of key stakeholders and targeted advocacy about the burden and potential solutions is important when adapting interventions to local health systems and communities. This approach has the potential to rapidly translate research into policy, but care must be taken not to exceed available evidence while seizing the policy opportunity.

Ask: a health advocacy program for adolescents with an intellectual disability: a cluster randomised controlled trial

PubMed Central

2012-01-01

Background Adolescents with intellectual disability often have poor health and healthcare. This is partly as a consequence of poor communication and recall difficulties, and the possible loss of specialised paediatric services. Methods/Design A cluster randomised trial was conducted with adolescents with intellectual disability to investigate a health intervention package to enhance interactions among adolescents with intellectual disability, their parents/carers, and general practitioners (GPs). The trial took place in Queensland, Australia, between February 2007 and September 2010. The intervention package was designed to improve communication with health professionals and families’ organisation of health information, and to increase clinical activities beneficial to improved health outcomes. It consisted of the Comprehensive Health Assessment Program (CHAP), a one-off health check, and the Ask Health Diary, designed for on-going use. Participants were drawn from Special Education Schools and Special Education Units. The education component of the intervention was delivered as part of the school curriculum. Educators were surveyed at baseline and followed-up four months later. Carers were surveyed at baseline and after 26 months. Evidence of health promotion, disease prevention and case-finding activities were extracted from GPs clinical records. Qualitative interviews of educators occurred after completion of the educational component of the intervention and with adolescents and carers after the CHAP. Discussion Adolescents with intellectual disability have difficulty obtaining many health services and often find it difficult to become empowered to improve and protect their health. The health intervention package proposed may aid them by augmenting communication, improving documentation of health encounters, and improving access to, and quality of, GP care. Recruitment strategies to consider for future studies in this population include ensuring potential participants can identify themselves with the individuals used in promotional study material, making direct contact with their families at the start of the study, and closely monitoring the implementation of the educational intervention. Trial Registration Number ClinicalTrials.gov Identifier: NCT00519311 PMID:22958354

Mental health and well-being in parents of excessively crying infants: Prospective evaluation of a support package.

PubMed

Powell, C; Bamber, D; Long, J; Garratt, R; Brown, J; Rudge, S; Morris, T; Bhupendra Jaicim, N; Plachcinski, R; Dyson, S; Boyle, E M; St James-Roberts, I

2018-04-17

During the first 4 months of age, approximately 20% of infants cry a lot without an apparent reason. Most research has targeted the crying, but the impact of the crying on parents, and subsequent outcomes, need to receive equal attention. This study reports the findings from a prospective evaluation of a package of materials designed to support the well-being and mental health of parents who judge their infant to be crying excessively. The resulting "Surviving Crying" package comprised a website, printed materials, and programme of Cognitive Behaviour Therapy-based support sessions delivered to parents by a qualified practitioner. It was designed to be suitable for United Kingdom (UK) National Health Service (NHS) use. Parents were referred to the study by 12 NHS Health Visitor/Community Public Health Nurse teams in one UK East Midlands NHS Trust. Fifty-two of 57 parents of excessively crying babies received the support package and completed the Edinburgh Postnatal Depression Scale and Generalized Anxiety Disorder-7 anxiety questionnaire, as well as other measures, before receiving the support package and afterwards. Significant reductions in depression and anxiety were found, with numbers of parents meeting clinical criteria for depression or anxiety halving between baseline and outcome. These improvements were not explained by reductions in infant crying. Reductions also occurred in the number of parents reporting the crying to be a large or severe problem (from 28 to 3 parents) or feeling very or extremely frustrated by the crying (from 31 to 1 parent). Other findings included increases in parents' confidence, knowledge of infant crying, and improvements in parents' sleep. The findings suggest that the Surviving Crying package may be effective in supporting the well-being and mental health of parents of excessively crying babies. Further, large-scale controlled trials of the package in NHS settings are warranted. © 2018 John Wiley & Sons Ltd.

Product retrieval time in small tobacco retail outlets before and after the Australian plain packaging policy: real-world study.

PubMed

Wakefield, Melanie; Bayly, Megan; Scollo, Michelle

2014-01-01

We aimed to assess change in cigarette pack retrieval time in small retail outlets following the introduction of plain packaging in Australia in 1 December 2012. A sample of 303 milk bars, convenience stores, petrol stations and newsagents was selected in four capital cities, stratified by area socioeconomic status. In June and September (baseline months), the first 2 weeks of December 2012, and February 2013, stores were visited by trained fieldworkers who requested a cigarette pack of a pre-determined brand, variant and pack size, unobtrusively recording the time from the end of the request to when the pack was scanned or placed on the counter. In multivariate analysis, December retrieval time (12.43 s) did not differ from June (10.91 s; p=0.410) or February (10.37 s; p=0.382), but was slower than September (9.84 s; p=0.024). In December, retrieval time declined as days after plain packaging implementation increased (β=-0.21, p=0.011), returning to the baseline range by the second week of implementation. This pattern was not observed in baseline months or in February. Sensitivity analyses showed that results were robust to the variability in purchasing circumstances in tobacco retail outlets. Retailers quickly gained experience with the new plain packaging legislation, evidenced by retrieval time having returned to the baseline range by the second week of implementation and remaining so several months later. The long retrieval times predicted by tobacco industry-funded retailer groups and the consequent costs they predicted would fall upon small retailers from plain packaging are unlikely to eventuate.

Mechanical Design of a Performance Test Rig for the Turbine Air-Flow Task (TAFT)

NASA Technical Reports Server (NTRS)

Forbes, John C.; Xenofos, George D.; Farrow, John L.; Tyler, Tom; Williams, Robert; Sargent, Scott; Moharos, Jozsef

2004-01-01

To support development of the Boeing-Rocketdyne RS84 rocket engine, a full-flow, reaction turbine geometry was integrated into the NASA-MSFC turbine air-flow test facility. A mechanical design was generated which minimized the amount of new hardware while incorporating all test and instrumentation requirements. This paper provides details of the mechanical design for this Turbine Air-Flow Task (TAFT) test rig. The mechanical design process utilized for this task included the following basic stages: Conceptual Design. Preliminary Design. Detailed Design. Baseline of Design (including Configuration Control and Drawing Revision). Fabrication. Assembly. During the design process, many lessons were learned that should benefit future test rig design projects. Of primary importance are well-defined requirements early in the design process, a thorough detailed design package, and effective communication with both the customer and the fabrication contractors.

NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

NASA Astrophysics Data System (ADS)

Greenhouse, M. A.; Dipirro, M.; Federline, B.; Gardner, Jonathan P.; Guy, P.; Hagopian, J.; Hein, J.; Jurotich, M.; Lawrence, J.; Martineau, B.; Mather, J. C.; Mentzell, E.; Satyapal, S.; Stanley, D.; Teplitz, H. I.; Travis, J.; Bely, P.; Petro, L. D.; Stockman, P.; Burg, R.; Bitzel, R.

1998-12-01

We display portions of the baseline design concept for the NGST Integrated Science Instrument Module (ISIM). This ISIM design is under ongoing development for integration with the "Yardstick" and other NGST 8 m architectures that are intended for packaging in an EELV or Ariane 5 meter class fairing. The goals of this activity are to: [1] demonstrate mission science feasibility, [2] identify ISIM technology challenge areas, [3] assess ISIM engineering and cost feasibility, [5] identify ISIM/NGST interface constraints, and [6] enable smart customer procurement of the ISIM. In this poster, we display a snap shot of work in progress including: optical design, opto-mechanical layout, thermal modeling, focal plane array design, and electronics design. Ongoing progress can be monitored via ISIM team web site: http://ngst.gsfc.nasa.gov/

Programming generalization of social skills in preschool children with hearing impairments.

PubMed

Ducharme, D E; Holborn, S W

1997-01-01

The efficacy of a social skills training package in producing stimulus generalization, both with and without the systematic application of generalization programming techniques, was evaluated with 5 preschool children with hearing impairments. The evaluation was conducted within a multiple baseline design. Generalization probes were conducted daily. The social skills training package was implemented in a training setting and produced high, stable rates of social interaction in that setting. However, generalization of the social skills to new teachers, peers, and play activities did not occur until generalization programming strategies were applied in the original training setting. Using sufficient stimulus exemplars and contacting natural consequences appeared to be the key strategies for promoting generalization of social interaction. In addition, the use of supplementary procedures (e.g., a fluency criterion and treatment integrity checks) may have contributed to stimulus generalization.

Programming generalization of social skills in preschool children with hearing impairments.

PubMed Central

Ducharme, D E; Holborn, S W

1997-01-01

The efficacy of a social skills training package in producing stimulus generalization, both with and without the systematic application of generalization programming techniques, was evaluated with 5 preschool children with hearing impairments. The evaluation was conducted within a multiple baseline design. Generalization probes were conducted daily. The social skills training package was implemented in a training setting and produced high, stable rates of social interaction in that setting. However, generalization of the social skills to new teachers, peers, and play activities did not occur until generalization programming strategies were applied in the original training setting. Using sufficient stimulus exemplars and contacting natural consequences appeared to be the key strategies for promoting generalization of social interaction. In addition, the use of supplementary procedures (e.g., a fluency criterion and treatment integrity checks) may have contributed to stimulus generalization. PMID:9433789

Pilot production and advanced development of large-area picosecond photodetectors

NASA Astrophysics Data System (ADS)

Minot, Michael J.; Adams, Bernhard W.; Aviles, Melvin; Bond, Justin L.; Craven, Christopher A.; Cremer, Till; Foley, Michael R.; Lyashenko, Alexey; Popecki, Mark A.; Stochaj, Michael E.; Worstell, William A.; Mane, Anil U.; Elam, Jeffrey W.; Siegmund, Oswald H. W.; Ertley, Camden; Frisch, Henry; Elagin, Andrey

2016-09-01

We report pilot production and advanced development performance results achieved for Large Area Picosecond Photodetectors (LAPPD). The LAPPD is a microchannel plate (MCP) based photodetector, capable of imaging with single-photon sensitivity at high spatial and temporal resolutions in a hermetic package with an active area of 400 square centimeters. In December 2015, Incom Inc. completed installation of equipment and facilities for demonstration of early stage pilot production of LAPPD. Initial fabrication trials commenced in January 2016. The "baseline" LAPPD employs an all-glass hermetic package with top and bottom plates and sidewalls made of borosilicate float glass. Signals are generated by a bi-alkali Na2KSb photocathode and amplified with a stacked chevron pair of "next generation" MCPs produced by applying resistive and emissive atomic layer deposition coatings to borosilicate glass capillary array (GCA) substrates. Signals are collected on RF strip-line anodes applied to the bottom plates which exit the detector via pinfree hermetic seals under the side walls. Prior tests show that LAPPDs have electron gains greater than 107, submillimeter space resolution for large pulses and several mm for single photons, time resolutions of 50 picoseconds for single photons, predicted resolution of less than 5 picoseconds for large pulses, high stability versus charge extraction, and good uniformity. LAPPD performance results for product produced during the first half of 2016 will be reviewed. Recent advances in the development of LAPPD will also be reviewed, as the baseline design is adapted to meet the requirements for a wide range of emerging application. These include a novel ceramic package design, ALD coated MCPs optimized to have a low temperature coefficient of resistance (TCR) and further advances to adapt the LAPPD for cryogenic applications using Liquid Argon (LAr). These developments will meet the needs for DOE-supported RD for the Deep Underground Neutrino Experiment (DUNE), nuclear physics applications such as EIC, medical, homeland security and astronomical applications for direct and indirect photon detection.

Ask: a health advocacy program for adolescents with an intellectual disability: a cluster randomised controlled trial.

PubMed

Lennox, Nicholas; Ware, Robert; Carrington, Suzanne; O'Callaghan, Michael; Williams, Gail; McPherson, Lyn; Bain, Chris

2012-09-07

Adolescents with intellectual disability often have poor health and healthcare. This is partly as a consequence of poor communication and recall difficulties, and the possible loss of specialised paediatric services. A cluster randomised trial was conducted with adolescents with intellectual disability to investigate a health intervention package to enhance interactions among adolescents with intellectual disability, their parents/carers, and general practitioners (GPs). The trial took place in Queensland, Australia, between February 2007 and September 2010. The intervention package was designed to improve communication with health professionals and families' organisation of health information, and to increase clinical activities beneficial to improved health outcomes. It consisted of the Comprehensive Health Assessment Program (CHAP), a one-off health check, and the Ask Health Diary, designed for on-going use. Participants were drawn from Special Education Schools and Special Education Units. The education component of the intervention was delivered as part of the school curriculum. Educators were surveyed at baseline and followed-up four months later. Carers were surveyed at baseline and after 26 months. Evidence of health promotion, disease prevention and case-finding activities were extracted from GPs clinical records. Qualitative interviews of educators occurred after completion of the educational component of the intervention and with adolescents and carers after the CHAP. Adolescents with intellectual disability have difficulty obtaining many health services and often find it difficult to become empowered to improve and protect their health. The health intervention package proposed may aid them by augmenting communication, improving documentation of health encounters, and improving access to, and quality of, GP care. Recruitment strategies to consider for future studies in this population include ensuring potential participants can identify themselves with the individuals used in promotional study material, making direct contact with their families at the start of the study, and closely monitoring the implementation of the educational intervention. ClinicalTrials.gov Identifier: NCT00519311.

An airline study of advanced technology requirements for advanced high speed commercial engines. 3: Propulsion system requirements

NASA Technical Reports Server (NTRS)

Sallee, G. P.

1973-01-01

The advanced technology requirements for an advanced high speed commercial transport engine are presented. The results of the phase 3 effort cover the requirements and objectives for future aircraft propulsion systems. These requirements reflect the results of the Task 1 and 2 efforts and serve as a baseline for future evaluations, specification development efforts, contract/purchase agreements, and operational plans for future subsonic commercial engines. This report is divided into five major sections: (1) management objectives for commercial propulsion systems, (2) performance requirements for commercial transport propulsion systems, (3) design criteria for future transport engines, (4) design requirements for powerplant packages, and (5) testing.

Integrated Approach to Industrial Packaging Design

NASA Astrophysics Data System (ADS)

Vorobeva, O.

2017-11-01

The article reviews studies in the field of industrial packaging design. The major factors which influence technological, ergonomic, economic and ecological features of packaging are established. The main modern trends in packaging design are defined, the principles of marketing communications and their influence on consumers’ consciousness are indicated, and the function of packaging as a transmitter of brand values is specified. Peculiarities of packaging technology and printing techniques in modern printing industry are considered. The role of designers in the stage-by-stage development of the construction, form and graphic design concept of packaging is defined. The examples of authentic packaging are given and the mention of the tetrahedron packaging history is made. At the end of the article, conclusions on the key research aspects are made.

NASA 60 GHz intersatellite communication link definition study. Baseline document

NASA Technical Reports Server (NTRS)

1986-01-01

The overall system and component concepts for a 60 GHz intersatellite communications link system (ICLS) are described. The ICLS was designed to augment the capabilities of the current Tracking and Data Relay Satellite System (TDRSS), providing a data rate capacity large enough to accommodate the expected rates for user satellites (USAT's) in the post-1995 timeframe. The use of 60 GHz for the anticipated successor to TDRSS, the Tracking and Data Acquisition System (TDAS), was selected because of current technology development that will enable multigigibit data rates. Additionally, the attenuation of the earth's atmosphere at 60 GHz means that there is virtually no possibility of terrestrially generated interference (intentional or accidental) or terrestrially based intercept. The ICLS includes the following functional areas: (1) the ICLS payload package on the GEO TDAS satellite that communicates simultaneously with up to five LEO USAT's; (2) the payload package on the USAT that communicates with the TDAS satellite; and (3) the crosslink payload package on the TDAS satellite that communicates with another TDAS satellite. Two methods of data relay on-board the TDAS spacecraft were addressed. One is a complete baseband system (demod and remod) with a bi-directional 2 Gbps data stream; the other is a channelized system wherein some of the channels are baseband and others are merely frequency translated before re-transmission. Descriptions of the TDAS antenna, transmitter, receiver, and mechanical designs are presented.

Re-design of apple pia packaging using quality function deployment method

NASA Astrophysics Data System (ADS)

Pulungan, M. H.; Nadira, N.; Dewi, I. A.

2018-03-01

This study was aimed to identify the attributes for premium apple pia packaging, to determine the technical response to be carried out by Permata Agro Mandiri Small and Medium Enterprise (SME) and to design a new apple pie packaging acceptable by the SME. The Quality Function Deployment (QFD) method was employed to improve the apple pia packaging design, which consisted of seven stages in data analysis. The results indicated that whats attribute required by the costumers include graphic design, dimensions, capacity, shape, strength, and resistance of packaging. While, the technical responses to be conducted by the SMEs were as follows: attractive visual packaging designs, attractive colors, clear images and information, packaging size dimensions, a larger capacity packaging (more product content), ergonomic premium packaging, not easily torn, and impact resistant packaging materials. The findings further confirmed that the design of premium apple pia packaging accepted by the SMES was the one with the capacity of ten apple pia or 200 g weight, and with rectangular or beam shape form. The packaging material used was a duplex carton with 400 grammage (g/m2), the outer part of the packaging was coated with plastic and the inside was added with duplex carton. The acceptable packaging dimension was 30 cm x 5 cm x 3 cm (L x W x H) with a mix of black and yellow color in the graphical design.

A facility-wide approach to recreation programming for adults who are severely and profoundly retarded.

PubMed

Burch, M R; Reiss, M; Bailey, J S

1985-01-01

A facility-wide recreation program was designed and implemented in order to increase staff and client participation in daily leisure activities at an intermediate care facility for severely and profoundly mentally retarded adults. The baseline phase of the study consisted of having recreational materials available during scheduled recreation periods. The treatment was a package program consisting of (1) providing the staff with preplanned materials and activities, (2) assigning staff to specific roles, and (3) monitoring staff and providing feedback by supervisors. The treatment was implemented on the two living units of the Liberty Intermediate Care Facility. Treatment effects were similar on both units. Client participation increased from a baseline average of less than 10% to nearly 50% and staff participation increased from less than 10% to an average of 60% during program implementation.

Stability of total nutrient admixtures with lipid injectable emulsions in glass versus plastic packaging.

PubMed

Driscoll, David F; Silvestri, Anthony P; Bistrian, Bruce R; Mikrut, Bernard A

2007-02-15

The physical stability of two emulsions compounded as part of a total nutrient admixture (TNA) was studied in lipids packaged in either glass or plastic containers. Five weight-based adult TNA formulations that were designed to meet the full nutritional needs of adults with body weights between 40 and 80 kg were studied. Triplicate preparations of each TNA were assessed over 30 hours at room temperature by applying currently proposed United States Pharmacopeia (USP) criteria for mean droplet diameter, large-diameter tail, and globule-size distribution (GSD) for lipid injectable emulsions. In accordance with conditions set forth in USP chapter 729, the higher levels of volume-weighted percent of fat exceeding 5 microm (PFAT(5)) should not exceed 0.05% of the total lipid concentration. Significant differences were noted among TNA admixtures based on whether the lipid emulsion product was manufactured in glass or plastic. The plastic-contained TNAs failed the proposed USP methods for large-diameter fat globules in all formulations from the outset, and 60% had significant growth in large-diameter fat globules over time. In contrast, glass-contained TNAs were stable throughout and in all cases would have passed proposed USP limits. Certain lipid injectable emulsions packaged in plastic containers have baseline abnormal GSD profiles compared with those packaged in glass containers. When used to compound TNAs, the abnormal profile worsens and produces less stable TNAs than those compounded with lipid injectable emulsions packaged in glass containers.

Design consideration for a nuclear electric propulsion system

NASA Technical Reports Server (NTRS)

Phillips, W. M.; Pawlik, E. V.

1978-01-01

A study is currently underway to design a nuclear electric propulsion vehicle capable of performing detailed exploration of the outer-planets. Primary emphasis is on the power subsystem. Secondary emphasis includes integration into a spacecraft, and integration with the thrust subsystem and science package or payload. The results of several design iterations indicate an all-heat-pipe system offers greater reliability, elimination of many technology development areas and a specific weight of under 20 kg/kWe at the 400 kWe power level. The system is compatible with a single Shuttle launch and provides greater safety than could be obtained with designs using pumped liquid metal cooling. Two configurations, one with the reactor and power conversion forward on the spacecraft with the ion engines aft and the other with reactor, power conversion and ion engines aft were selected as dual baseline designs based on minimum weight, minimum required technology development and maximum growth potential and flexibility.

Exposure to graphic warning labels on cigarette packages: Effects on implicit and explicit attitudes towards smoking among young adults.

PubMed

Macy, Jonathan T; Chassin, Laurie; Presson, Clark C; Yeung, Ellen

2016-01-01

To test the effect of exposure to the US Food and Drug Administration's proposed graphic images with text warning statements for cigarette packages on implicit and explicit attitudes towards smoking. A two-session web-based study was conducted with 2192 young adults 18-25-years-old. During session one, demographics, smoking behaviour, and baseline implicit and explicit attitudes were assessed. Session two, completed on average 18 days later, contained random assignment to viewing one of three sets of cigarette packages, graphic images with text warnings, text warnings only, or current US Surgeon General's text warnings. Participants then completed post-exposure measures of implicit and explicit attitudes. ANCOVAs tested the effect of condition on the outcomes, controlling for baseline attitudes. Smokers who viewed packages with graphic images plus text warnings demonstrated more negative implicit attitudes compared to smokers in the other conditions (p = .004). For the entire sample, explicit attitudes were more negative for those who viewed graphic images plus text warnings compared to those who viewed current US Surgeon General's text warnings (p = .014), but there was no difference compared to those who viewed text-only warnings. Graphic health warnings on cigarette packages can influence young adult smokers' implicit attitudes towards smoking.

The empowerment of sustainable design in food packaging as designer responsibilities

NASA Astrophysics Data System (ADS)

Setiadi, V.

2018-01-01

The purpose of this paper is emphasized on the empowerment of sustainable design in providing the dual function of a food packaging. Which can extend the life of paper, cardboard, plastic, aluminum foil so as to reduce the contribution of waste on earth. The methodology used in this research is using qualitative research. With the main approach taken on the layout of the packaging design, the approach that relies heavily on the data in the form of packaging design. For the process of observation, the authors should compare with the forms of food packaging designs that are contained in the diversity of food packaging types from products outside Indonesia. The purpose of this study is also intended as a recommendation through observation of data interviews and survey related products. Conclusion through material exploration, packaging structure exploration, efficient exploration of ink usage and packaging usage patterns.

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2011 CFR

2011-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2013 CFR

2013-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2014 CFR

2014-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2012 CFR

2012-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

Cigarette package design: opportunities for disease prevention.

PubMed

Difranza, J R; Clark, D M; Pollay, R W

2002-06-15

To learn how cigarette packages are designed and to determine to what extent cigarette packages are designed to target children. A computer search was made of all Internet websites that post tobacco industry documents using the search terms: packaging, package design, package study, box design, logo, trademark and design study. All documents were retrieved electronically and analyzed by the first author for recurrent themes. Cigarette manufacturers devote a great deal of attention and expense to package design because it is central to their efforts to create brand images. Colors, graphic elements, proportioning, texture, materials and typography are tested and used in various combinations to create the desired product and user images. Designs help to create the perceived product attributes and project a personality image of the user with the intent of fulfilling the psychological needs of the targeted type of smoker. The communication of these images and attributes is conducted through conscious and subliminal processes. Extensive testing is conducted using a variety of qualitative and quantitative research techniques. The promotion of tobacco products through appealing imagery cannot be stopped without regulating the package design. The same marketing research techniques used by the tobacco companies can be used to design generic packaging and more effective warning labels targeted at specific consumers.

Cigarette package design: opportunities for disease prevention

PubMed Central

DiFranza, JR; Clark, DM; Pollay, RW

2003-01-01

Objective To learn how cigarette packages are designed and to determine to what extent cigarette packages are designed to target children. Methods A computer search was made of all Internet websites that post tobacco industry documents using the search terms: packaging, package design, package study, box design, logo, trademark and design study. All documents were retrieved electronically and analyzed by the first author for recurrent themes. Data Synthesis Cigarette manufacturers devote a great deal of attention and expense to package design because it is central to their efforts to create brand images. Colors, graphic elements, proportioning, texture, materials and typography are tested and used in various combinations to create the desired product and user images. Designs help to create the perceived product attributes and project a personality image of the user with the intent of fulfilling the psychological needs of the targeted type of smoker. The communication of these images and attributes is conducted through conscious and subliminal processes. Extensive testing is conducted using a variety of qualitative and quantitative research techniques. Conclusion The promotion of tobacco products through appealing imagery cannot be stopped without regulating the package design. The same marketing research techniques used by the tobacco companies can be used to design generic packaging and more effective warning labels targeted at specific consumers. PMID:19570250

Cigarette package design: opportunities for disease prevention

PubMed Central

DiFranza, JR; Clark, DM; Pollay, RW

2003-01-01

Objective To learn how cigarette packages are designed and to determine to what extent cigarette packages are designed to target children. Methods A computer search was made of all Internet websites that post tobacco industry documents using the search terms: packaging, package design, package study, box design, logo, trademark and design study. All documents were retrieved electronically and analyzed by the first author for recurrent themes. Data Synthesis Cigarette manufacturers devote a great deal of attention and expense to package design because it is central to their efforts to create brand images. Colors, graphic elements, proportioning, texture, materials and typography are tested and used in various combinations to create the desired product and user images. Designs help to create the perceived product attributes and project a personality image of the user with the intent of fulfilling the psychological needs of the targeted type of smoker. The communication of these images and attributes is conducted through conscious and subliminal processes. Extensive testing is conducted using a variety of qualitative and quantitative research techniques. Conclusion The promotion of tobacco products through appealing imagery cannot be stopped without regulating the package design. The same marketing research techniques used by the tobacco companies can be used to design generic packaging and more effective warning labels targeted at specific consumers.

A community-based cluster randomized controlled trial (cRCT) to evaluate the impact and operational assessment of "safe motherhood and newborn health promotion package": study protocol.

PubMed

Hoque, Dewan Md Emdadul; Chowdhury, Mohiuddin Ahsanul Kabir; Rahman, Ahmed Ehsanur; Billah, Sk Masum; Bari, Sanwarul; Tahsina, Tazeen; Hasan, Mohammad Mehedi; Islam, Sajia; Islam, Tajul; Mori, Rintaro; Arifeen, Shams El

2018-05-03

Despite considerable progress in reduction of both under-five and maternal mortality in recent decades, Bangladesh is still one of the low and middle income countries with high burden of maternal and neonatal mortality. The primary objective of the current study is to measure the impact of a comprehensive package of interventions on maternal and neonatal mortality. In addition, changes in coverage, quality and utilization of maternal and newborn health (MNH) services, social capital, and cost effectiveness of the interventions will be measured. A community-based, cluster randomized controlled trial design will be adopted and implemented in 30 unions of three sub-districts of Chandpur district of Bangladesh. Every union, the lowest administrative unit of the local government with population of around 20,000-30,000, will be considered a cluster. Based on the baseline estimates, 15 clusters will be paired for random assignment as intervention and comparison clusters. The primary outcome measure is neonatal mortality, and secondary outcomes are coverage of key interventions like ANC, PNC, facility and skilled provider delivery. Baseline, midterm and endline household survey will be conducted to assess the key coverage of interventions. Health facility assessment surveys will be conducted periodically to assess facility readiness and utilization of MNH services in the participating health facilities. The current study is expected to provide essential strong evidences on the impact of a comprehensive package of interventions to the Bangladesh government, and other developmental partners. The study results may help in prioritizing, planning, and scaling-up of Safe Motherhood Promotional interventions in other geographical areas of Bangladesh as well as to inform other developing countries of similar settings. NCT03032276 .

Parasitic heat loss reduction in AMTEC cells by heat shield optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borkowski, C.A.; Svedberg, R.C.; Hendricks, T.J.

1997-12-31

Alkali metal thermal to electric conversion (AMTEC) cell performance can be increased by the proper design of thermal radiative shielding internal to the AMTEC cell. These heat shields essentially lower the radiative heat transfer between the heat input zone of the cell and the heat rejection zone of the cell. In addition to lowering the radiative heat transfer between the heat input and heat rejection surfaces of the cell, the shields raise the AMTEC cell performance by increasing the temperature of the beta alumina solid electrolyte (BASE). This increase in temperature of the BASE tube allows the evaporator temperature tomore » be increased without sodium condensing within the BASE tubes. Experimental testing and theoretical analysis have been performed to compare the relative merits of two candidate heat shield packages: (1) chevron, and (2) cylindrical heat shields. These two heat shield packages were compared to each other and a baseline cell which had no heat shields installed. For the two heat shield packages, the reduction in total heat transfer is between 17--27% for the heat input surface temperature varying from 700 C, 750 C, and 800 C with the heat rejection surface temperature kept at 300 C.« less

Atmospheric science facility pallet-only mode space transportation system payload (feasibility study), Volume 1

NASA Technical Reports Server (NTRS)

1975-01-01

The economic and technical feasibility is assessed of employing a pallet-only mode for conducting Atmospheric Magnetospheric Plasmas-in-Space experiments. A baseline design incorporating the experiment and instrument descriptions is developed. The prime instruments are packaged into four pallets in a physical and functional manner compatible with the Space Transportation System capabilities and/or constraints and an orbiter seven-day mission timeline. Operational compatibility is verified between the orbiter/payload and supporting facilities. The development status and the schedule requirements applicable to the Atmospheric Science Facility mission are identified. Conclusions and recommendations are presented and discussed.

Assessment of Quality Assurance Measures for Radioactive Material Transport Packages not Requiring Competent Authority Design Approval - 13282

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komann, Steffen; Groeke, Carsten; Droste, Bernhard

The majority of transports of radioactive materials are carried out in packages which don't need a package design approval by a competent authority. Low-active radioactive materials are transported in such packages e.g. in the medical and pharmaceutical industry and in the nuclear industry as well. Decommissioning of NPP's leads to a strong demand for packages to transport low and middle active radioactive waste. According to IAEA regulations the 'non-competent authority approved package types' are the Excepted Packages and the Industrial Packages of Type IP-1, IP-2 and IP-3 and packages of Type A. For these types of packages an assessment bymore » the competent authority is required for the quality assurance measures for the design, manufacture, testing, documentation, use, maintenance and inspection (IAEA SSR 6, Chap. 306). In general a compliance audit of the manufacturer of the packaging is required during this assessment procedure. Their regulatory level in the IAEA regulations is not comparable with the 'regulatory density' for packages requiring competent authority package design approval. Practices in different countries lead to different approaches within the assessment of the quality assurance measures in the management system as well as in the quality assurance program of a special package design. To use the package or packaging in a safe manner and in compliance with the regulations a management system for each phase of the life of the package or packaging is necessary. The relevant IAEA-SSR6 chap. 801 requires documentary verification by the consignor concerning package compliance with the requirements. (authors)« less

PACKAGING CERTIFICATION PROGRAM METHODOLOGY FOR DETERMINING DOSE RATES FOR SMALL GRAM QUANTITIES IN SHIPPING PACKAGINGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nathan, S.; Loftin, B.; Abramczyk, G.

The Small Gram Quantity (SGQ) concept is based on the understanding that small amounts of hazardous materials, in this case radioactive materials (RAM), are significantly less hazardous than large amounts of the same materials. This paper describes a methodology designed to estimate an SGQ for several neutron and gamma emitting isotopes that can be shipped in a package compliant with 10 CFR Part 71 external radiation level limits regulations. These regulations require packaging for the shipment of radioactive materials, under both normal and accident conditions, to perform the essential functions of material containment, subcriticality, and maintain external radiation levels withinmore » the specified limits. By placing the contents in a helium leak-tight containment vessel, and limiting the mass to ensure subcriticality, the first two essential functions are readily met. Some isotopes emit sufficiently strong photon radiation that small amounts of material can yield a large dose rate outside the package. Quantifying the dose rate for a proposed content is a challenging issue for the SGQ approach. It is essential to quantify external radiation levels from several common gamma and neutron sources that can be safely placed in a specific packaging, to ensure compliance with federal regulations. The Packaging Certification Program (PCP) Methodology for Determining Dose Rate for Small Gram Quantities in Shipping Packagings provides bounding shielding calculations that define mass limits compliant with 10 CFR 71.47 for a set of proposed SGQ isotopes. The approach is based on energy superposition with dose response calculated for a set of spectral groups for a baseline physical packaging configuration. The methodology includes using the MCNP radiation transport code to evaluate a family of neutron and photon spectral groups using the 9977 shipping package and its associated shielded containers as the base case. This results in a set of multipliers for 'dose per particle' for each spectral group. For a given isotope, the source spectrum is folded with the response for each group. The summed contribution from all isotopes determines the total dose from the RAM in the container.« less

Modular, thermal bus-to-radiator integral heat exchanger design for Space Station Freedom

NASA Technical Reports Server (NTRS)

Chambliss, Joe; Ewert, Michael

1990-01-01

The baseline concept is introduced for the 'integral heat exchanger' (IHX) which is the interface of the two-phase thermal bus with the heat-rejecting radiator panels. A direct bus-to-radiator heat-pipe integral connection replaces the present interface hardware to reduce the weight and complexity of the heat-exchange mechanism. The IHX is presented in detail and compared to the baseline system assuming certain values for heat rejection, mass per unit width, condenser capacity, contact conductance, and assembly mass. The spreadsheet comparison can be used to examine a variety of parameters such as radiator length and configuration. The IHX is shown to permit the reduction of panel size and system mass in response to better conductance and packaging efficiency. The IHX is found to be a suitable heat-rejection system for the Space Station Freedom because it uses present technology and eliminates the interface mechanisms.

Home safety: development and validation of one component of an ecobehavioral treatment program for abused and neglected children.

PubMed Central

Tertinger, D A; Greene, B F; Lutzker, J R

1984-01-01

Parents may be charged with child abuse or neglect or both on the basis of a variety of circumstances. Child neglect, for example, is often documented when caseworkers observe that the family's home itself is so poorly kept that it presents an environment in which young children have ready access to lethal hazards such as poisons, uncovered wall outlets, and firearms. In this study, we describe the development of a Home Accident Prevention Inventory (HAPI) which was validated and used to assess hazards in the homes of several families under state protective service for child abuse and neglect. The HAPI included five categories of hazards: fire and electrical, mechanical-suffocation, ingested object suffocation, firearms, and solid/liquid poisons. Following the collection of baseline data, parents were presented with a treatment package that included instructions and demonstrations on making hazards inaccessible to children, plus feedback regarding the number and location of hazards in the home. The multiple-baseline design across hazardous categories in each family's home showed that the package resulted in decreases in the number of these accessible hazards. These improvements were maintained over an extended period of unannounced follow-up checks. This research provides a model for the development and assessment of an area previously unexamined in the child abuse and neglect literature. PMID:6735949

Mechanical Design of a Performance Test Rig for the Turbine Air-Flow Task (TAFT)

NASA Technical Reports Server (NTRS)

Xenofos, George; Forbes, John; Farrow, John; Williams, Robert; Tyler, Tom; Sargent, Scott; Moharos, Jozsef

2003-01-01

To support development of the Boeing-Rocketdyne RS84 rocket engine, a fill-flow, reaction turbine geometry was integrated into the NASA-MSFC turbine air-flow test facility. A mechanical design was generated which minimized the amount of new hardware while incorporating all test and instrUmentation requirements. This paper provides details of the mechanical design for this Turbine Air-Flow Task (TAFT) test rig. The mechanical design process utilized for this task included the following basic stages: Conceptual Design. Preliminary Design. Detailed Design. Baseline of Design (including Configuration Control and Drawing Revision). Fabrication. Assembly. During the design process, many lessons were learned that should benefit future test rig design projects. Of primary importance are well-defined requirements early in the design process, a thorough detailed design package, and effective communication with both the customer and the fabrication contractors. The test rig provided steady and unsteady pressure data necessary to validate the computational fluid dynamics (CFD) code. The rig also helped characterize the turbine blade loading conditions. Test and CFD analysis results are to be presented in another JANNAF paper.

Waste Package Component Design Methodology Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.C. Mecham

2004-07-12

This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and usemore » of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety and operational requirements of the YMP. Four waste package configurations have been selected to illustrate the application of the methodology during the licensing process. These four configurations are the 21-pressurized water reactor absorber plate waste package (21-PWRAP), the 44-boiling water reactor waste package (44-BWR), the 5 defense high-level radioactive waste (HLW) DOE spent nuclear fuel (SNF) codisposal short waste package (5-DHLWDOE SNF Short), and the naval canistered SNF long waste package (Naval SNF Long). Design work for the other six waste packages will be completed at a later date using the same design methodology. These include the 24-boiling water reactor waste package (24-BWR), the 21-pressurized water reactor control rod waste package (21-PWRCR), the 12-pressurized water reactor waste package (12-PWR), the 5 defense HLW DOE SNF codisposal long waste package (5-DHLWDOE SNF Long), the 2 defense HLW DOE SNF codisposal waste package (2-MC012-DHLW), and the naval canistered SNF short waste package (Naval SNF Short). This report is only part of the complete design description. Other reports related to the design include the design reports, the waste package system description documents, manufacturing specifications, and numerous documents for the many detailed calculations. The relationships between this report and other design documents are shown in Figure 1.« less

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... design type that has passed a leakproofness test at the Packing Group II level. Small inner packagings... packaging or transport unit is closed. Each packaging must correspond to a design type that has passed a... transport unit is closed. Each packaging must correspond to a design type that has passed a leakproofness...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packagings, each packaging must correspond to a design type that has passed a leakproofness test at the...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packagings, each packaging must correspond to a design type that has passed a leakproofness test at the...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... design type that has passed a leakproofness test at the Packing Group II level. Small inner packagings... packaging or transport unit is closed. Each packaging must correspond to a design type that has passed a... transport unit is closed. Each packaging must correspond to a design type that has passed a leakproofness...

Sustaining Software-Intensive Systems

DTIC Science & Technology

2006-05-01

2.2 Multi- Service Operational Test and Evaluation .......................................4 2.3 Stable Software Baseline...or equivalent document • completed Multi- Service Operational Test and Evaluation (MOT&E) for the potential production software package (or OT&E if...not multi- service ) • stable software production baseline • complete and current software documentation • Authority to Operate (ATO) for an

Improving Safe Consumer Transfers in a Day Treatment Setting Using Training and Feedback

PubMed Central

Austin, John; Rost, Kristen; Stanley, Leslie

2011-01-01

An intervention package that included employee training, supervisory feedback, and graphic feedback was developed to increase employees' safe patient-transfers at a day treatment center for adults with disabilities. The intervention was developed based on the center's results from a Performance Diagnostic Checklist (PDC), which focused on antecedents, equipment and processes, knowledge and skills, and consequences related to patient-transfers. A multiple baseline (MBL) across two lifts (pivot and trunk), with one lift (side) remaining in baseline was used to evaluate the effects of the treatment package on three lifts commonly used by three health-care workers. The results indicated a substantial increase in the overall safe performance of the three lifts. The mean increase for group safety performance following intervention was 34% and 29% over baseline measures for the two target transfers, and 28% over baseline measures for the nontargeted transfer. The implications of these findings suggest that in settings where patient transfers are frequent and injuries are likely to occur (e.g., hospitals, day treatment centers), safe lifting and transferring behaviors can improve with an efficient and cost-effective intervention. PMID:22649577

Technical Review Report for the Model 9978-96 Package Safety Analysis Report for Packaging (S-SARP-G-00002, Revision 1, March 2009)

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, M

2009-03-06

This Technical Review Report (TRR) documents the review, performed by Lawrence Livermore National Laboratory (LLNL) Staff, at the request of the Department of Energy (DOE), on the 'Safety Analysis Report for Packaging (SARP), Model 9978 B(M)F-96', Revision 1, March 2009 (S-SARP-G-00002). The Model 9978 Package complies with 10 CFR 71, and with 'Regulations for the Safe Transport of Radioactive Material-1996 Edition (As Amended, 2000)-Safety Requirements', International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1. The Model 9978 Packaging is designed, analyzed, fabricated, and tested in accordance with Section III of the American Society of Mechanical Engineers Boiler and Pressuremore » Vessel Code (ASME B&PVC). The review presented in this TRR was performed using the methods outlined in Revision 3 of the DOE's 'Packaging Review Guide (PRG) for Reviewing Safety Analysis Reports for Packages'. The format of the SARP follows that specified in Revision 2 of the Nuclear Regulatory Commission's Regulatory Guide 7.9, i.e., 'Standard Format and Content of Part 71 Applications for Approval of Packages for Radioactive Material'. Although the two documents are similar in their content, they are not identical. Formatting differences have been noted in this TRR, where appropriate. The Model 9978 Packaging is a single containment package, using a 5-inch containment vessel (5CV). It uses a nominal 35-gallon drum package design. In comparison, the Model 9977 Packaging uses a 6-inch containment vessel (6CV). The Model 9977 and Model 9978 Packagings were developed concurrently, and they were referred to as the General Purpose Fissile Material Package, Version 1 (GPFP). Both packagings use General Plastics FR-3716 polyurethane foam as insulation and as impact limiters. The 5CV is used as the Primary Containment Vessel (PCV) in the Model 9975-96 Packaging. The Model 9975-96 Packaging also has the 6CV as its Secondary Containment Vessel (SCV). In comparison, the Model 9975 Packagings use Celotex{trademark} for insulation and as impact limiters. To provide a historical perspective, it is noted that the Model 9975-96 Packaging is a 35-gallon drum package design that has evolved from a family of packages designed by DOE contractors at the Savannah River Site. Earlier package designs, i.e., the Model 9965, the Model 9966, the Model 9967, and the Model 9968 Packagings, were originally designed and certified in the early 1980s. In the 1990s, updated package designs that incorporated design features consistent with the then-newer safety requirements were proposed. The updated package designs at the time were the Model 9972, the Model 9973, the Model 9974, and the Model 9975 Packagings, respectively. The Model 9975 Package was certified by the Packaging Certification Program, under the Office of Safety Management and Operations. The Model 9978 Package has six Content Envelopes: C.1 ({sup 238}Pu Heat Sources), C.2 ( Pu/U Metals), C.3 (Pu/U Oxides, Reserved), C.4 (U Metal or Alloy), C.5 (U Compounds), and C.6 (Samples and Sources). Per 10 CFR 71.59 (Code of Federal Regulations), the value of N is 50 for the Model 9978 Package leading to a Criticality Safety Index (CSI) of 1.0. The Transport Index (TI), based on dose rate, is calculated to be a maximum of 4.1.« less

78 FR 1101 - Hazardous Materials: Harmonization With the United Nations Recommendations on the Transport of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-07

... packaging maintains an equivalent level of performance to the originally tested packaging design must be... material, packing group assignments, special provisions, packaging authorizations, packaging sections, air... responsibilities related to packaging design variation, manufacturer notification, and recordkeeping requirements...

Effectiveness of a training package for implementing a community-based occupational therapy program in dementia: a cluster randomized controlled trial.

PubMed

Döpp, Carola M E; Graff, Maud J L; Teerenstra, Steven; Olde Rikkert, Marcel G M; Nijhuis-van der Sanden, Maria W G; Vernooij-Dassen, Myrra J F J

2015-10-01

Evaluate the effectiveness of a training package to implement a community occupational therapy program for people with dementia and their caregiver (COTiD). Cluster randomized controlled trial. A total of 45 service units including 94 occupational therapists, 48 managers, 80 physicians, treating 71 client-caregiver couples. Control intervention: A postgraduate course for occupational therapists only. A training package including the usual postgraduate course, additional training days, outreach visits, regional meetings, and access to a reporting system for occupational therapists. Physicians and managers received newsletters, had access to a website, and were approached by telephone. The intended adherence of therapists to the COTiD program. This was assessed using vignettes. clients' daily functioning, caregivers' sense of competence, quality of life, and self-perceived performance of daily activities of both clients and caregivers. Between-group differences were assessed using multilevel analyses with therapist and intervention factors as covariates. No significant between-group differences between baseline and 12 months were found for adherence (1.58, 95% CI -0.10 to 3.25), nor for any client or caregiver outcome. A higher number of coaching sessions and higher self-perceived knowledge of dementia at baseline positively correlated with adherence scores. In contrast, experiencing more support from occupational therapy colleagues or having conducted more COTiD treatments at baseline negatively affected adherence scores. The training package was not effective in increasing therapist adherence and client-caregiver outcomes. This study suggests that coaching sessions and increasing therapist knowledge on dementia positively affect adherence. NCT01117285. © The Author(s) 2014.

CFD modeling to improve safe and efficient distribution of chlorine dioxide gas for packaging fresh produce

USDA-ARS?s Scientific Manuscript database

The efficiency of the packaging system in inactivating food borne pathogens and prolonging the shelf life of fresh-cut produce is influenced by the design of the package apart from material and atmospheric conditions. Three different designs were considered to determine a specific package design ens...

10 CFR 71.107 - Package design control.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Package design control. 71.107 Section 71.107 Energy... Assurance § 71.107 Package design control. (a) The licensee, certificate holder, and applicant for a CoC... identification and control of design interfaces and for coordination among participating design organizations...

10 CFR 71.107 - Package design control.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Package design control. 71.107 Section 71.107 Energy... Assurance § 71.107 Package design control. (a) The licensee, certificate holder, and applicant for a CoC... identification and control of design interfaces and for coordination among participating design organizations...

10 CFR 71.107 - Package design control.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Package design control. 71.107 Section 71.107 Energy... Assurance § 71.107 Package design control. (a) The licensee, certificate holder, and applicant for a CoC... identification and control of design interfaces and for coordination among participating design organizations...

10 CFR 71.107 - Package design control.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Package design control. 71.107 Section 71.107 Energy... Assurance § 71.107 Package design control. (a) The licensee, certificate holder, and applicant for a CoC... identification and control of design interfaces and for coordination among participating design organizations...

10 CFR 71.107 - Package design control.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Package design control. 71.107 Section 71.107 Energy... Assurance § 71.107 Package design control. (a) The licensee, certificate holder, and applicant for a CoC... identification and control of design interfaces and for coordination among participating design organizations...

TYPE A FISSILE PACKAGING FOR AIR TRANSPORT PROJECT OVERVIEW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eberl, K.; Blanton, P.

2013-10-11

This paper presents the project status of the Model 9980, a new Type A fissile packaging for use in air transport. The Savannah River National Laboratory (SRNL) developed this new packaging to be a light weight (<150-lb), drum-style package and prepared a Safety Analysis for Packaging (SARP) for submission to the DOE/EM. The package design incorporates unique features and engineered materials specifically designed to minimize packaging weight and to be in compliance with 10CFR71 requirements. Prototypes were fabricated and tested to evaluate the design when subjected to Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC). An overview ofmore » the design details, results of the regulatory testing, and lessons learned from the prototype fabrication for the 9980 will be presented.« less

eLISA Telescope In-field Pointing and Scattered Light Study

NASA Astrophysics Data System (ADS)

Livas, J.; Sankar, S.; West, G.; Seals, L.; Howard, J.; Fitzsimons, E.

2017-05-01

The orbital motion of the three spacecraft that make up the eLISA Observatory constellation causes long-arm line of sight variations of approximately ± one degree over the course of a year. The baseline solution is to package the telescope, the optical bench, and the gravitational reference sensor (GRS) into an optical assembly at each end of the measurement arm, and then to articulate the assembly. An optical phase reference is exchanged between the moving optical benches with a single mode optical fiber (“backlink” fiber). An alternative solution, referred to as in-field pointing, embeds a steering mirror into the optical design, fixing the optical benches and eliminating the backlink fiber, but requiring the additional complication of a two-stage optical design for the telescope. We examine the impact of an in-field pointing design on the scattered light performance.

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2010 CFR

2010-04-01

...). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that...). For purposes of this section, the term package design means the specific graphic arrangement or design... design of a container with respect to its shape or function. (4) Coordination with other provisions of...

Behavioral treatment of chronic aerophagia.

PubMed

Barrett, R P; McGonigle, J J; Ackles, P K; Burkhart, J E

1987-05-01

Effects of various behavioral interventions on stereotyped aerophagic responding by a profoundly mentally retarded, 5-year-old girl were assessed. Aerophagic responding was defined as air swallowing with extreme stomach protrusion, followed by breath-holding. Observations of air swallowing, as well as physiologic measurements related to heart rate and respiratory patterns, were recorded across both baseline and treatment phases of the study. Multiple behavioral interventions were assessed within a laboratory setting using an alternating treatment design format, with the most effective treatment systematically extended to additional settings. Results indicated that a behavior modification treatment package was effective in suppressing the high frequency of this rare stereotyped act to near-zero rates.

Advanced Space Suit Portable Life Support Subsystem Packaging Design

NASA Technical Reports Server (NTRS)

Howe, Robert; Diep, Chuong; Barnett, Bob; Thomas, Gretchen; Rouen, Michael; Kobus, Jack

2006-01-01

This paper discusses the Portable Life Support Subsystem (PLSS) packaging design work done by the NASA and Hamilton Sundstrand in support of the 3 future space missions; Lunar, Mars and zero-g. The goal is to seek ways to reduce the weight of PLSS packaging, and at the same time, develop a packaging scheme that would make PLSS technology changes less costly than the current packaging methods. This study builds on the results of NASA s in-house 1998 study, which resulted in the "Flex PLSS" concept. For this study the present EMU schematic (low earth orbit) was used so that the work team could concentrate on the packaging. The Flex PLSS packaging is required to: protect, connect, and hold the PLSS and its components together internally and externally while providing access to PLSS components internally for maintenance and for technology change without extensive redesign impact. The goal of this study was two fold: 1. Bring the advanced space suit integrated Flex PLSS concept from its current state of development to a preliminary design level and build a proof of concept mockup of the proposed design, and; 2. "Design" a Design Process, which accommodates both the initial Flex PLSS design and the package modifications, required to accommodate new technology.

Multimedia package for LRFD concrete bridge design.

DOT National Transportation Integrated Search

2009-02-01

This Project developed a Load and Resistance Factor Design (LRFD) multimedia package to provide a practical introduction and an in-depth understanding of the technological advances in the design of concrete bridges. This package can be used to train ...

Effect of Community-based Behavior Change Communication on Delivery and Newborn Health Care Practices in a Resettlement Colony of Delhi.

PubMed

Parashar, Mamta; Singh, Sv; Kishore, Jugal; Kumar, Ajay; Bhardwaj, Milan

2013-01-01

Neonatal morbidity and mortality in India continue to be high. Among other reasons, newborn care practices are major contributors for such high rates. To assess the effect of behavior change communication (BCC) package among pregnant women regarding neonatal care. Semistructured and pretested schedule was used to interview 200 multigravidas on various aspects of neonatal care. Based on the preliminary data, BCC package was designed and implemented in intervention block in the community. Follow-up was done to find out change in their behavior. Data were analyzed using Epi info and Fischer exact test and chi-square test were applied in the baseline data. A P value of less than 0.05 was considered significant. Effect of the BCC package is given in terms of relative risk. BCC package increased 1.76 times higher number of deliveries conducted by trained dais in intervention group. There was significant improvement in using sterile cord tie (P = 0.01), applied nothing to the cord (P < 0.0001) and giving bath to their baby within 6 h of birth (P = 0.02) in intervention group as compared to nonintervention group. Significant difference was found between the two groups with regard to breastfeeding practices of baby. Harmful practices were reduced in the intervention group. Significant improvement was found in intervention group as compared to nonintervention group with regard to knowledge of danger signals, physiological variants, management of breastfeeding-related problems, and awareness of skin-to-skin technique for the management of hypothermic baby. Inadequate knowledge and adverse practices regarding neonatal care among mothers in study areas were found. BCC package had favorable impact on behavior of mothers for neonatal care in intervention group.

Packaging of electronic modules

NASA Technical Reports Server (NTRS)

Katzin, L.

1966-01-01

Study of design approaches that are taken toward optimizing the packaging of electronic modules with respect to size, shape, component orientation, interconnections, and structural support. The study does not present a solution to specific packaging problems, but rather the factors to be considered to achieve optimum packaging designs.

Design Optimization Toolkit: Users' Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguilo Valentin, Miguel Alejandro

The Design Optimization Toolkit (DOTk) is a stand-alone C++ software package intended to solve complex design optimization problems. DOTk software package provides a range of solution methods that are suited for gradient/nongradient-based optimization, large scale constrained optimization, and topology optimization. DOTk was design to have a flexible user interface to allow easy access to DOTk solution methods from external engineering software packages. This inherent flexibility makes DOTk barely intrusive to other engineering software packages. As part of this inherent flexibility, DOTk software package provides an easy-to-use MATLAB interface that enables users to call DOTk solution methods directly from the MATLABmore » command window.« less

Conduction-driven cooling of LED-based automotive LED lighting systems for abating local hot spots

NASA Astrophysics Data System (ADS)

Saati, Ferina; Arik, Mehmet

2018-02-01

Light-emitting diode (LED)-based automotive lighting systems pose unique challenges, such as dual-side packaging (front side for LEDs and back side for driver electronics circuit), size, harsh ambient, and cooling. Packaging for automotive lighting applications combining the advanced printed circuit board (PCB) technology with a multifunctional LED-based board is investigated with a focus on the effect of thermal conduction-based cooling for hot spot abatement. A baseline study with a flame retardant 4 technology, commonly known as FR4 PCB, is first compared with a metal-core PCB technology, both experimentally and computationally. The double-sided advanced PCB that houses both electronics and LEDs is then investigated computationally and experimentally compared with the baseline FR4 PCB. Computational models are first developed with a commercial computational fluid dynamics software and are followed by an advanced PCB technology based on embedded heat pipes, which is computationally and experimentally studied. Then, attention is turned to studying different heat pipe orientations and heat pipe placements on the board. Results show that conventional FR4-based light engines experience local hot spots (ΔT>50°C) while advanced PCB technology based on heat pipes and thermal spreaders eliminates these local hot spots (ΔT<10°C), leading to a higher lumen extraction with improved reliability. Finally, possible design options are presented with embedded heat pipe structures that further improve the PCB performance.

A Boundary Scan Test Vehicle for Direct Chip Attach Testing

NASA Technical Reports Server (NTRS)

Parsons, Heather A.; DAgostino, Saverio; Arakaki, Genji

2000-01-01

To facilitate the new faster, better and cheaper spacecraft designs, smaller more mass efficient avionics and instruments are using higher density electronic packaging technologies such as direct chip attach (DCA). For space flight applications, these technologies need to have demonstrated reliability and reasonably well defined fabrication and assembly processes before they will be accepted as baseline designs in new missions. As electronics shrink in size, not only can repair be more difficult, but 49 probing" circuitry can be very risky and it becomes increasingly more difficult to identify the specific source of a problem. To test and monitor these new technologies, the Direct Chip Attach Task, under NASA's Electronic Parts and Packaging Program (NEPP), chose the test methodology of boundary scan testing. The boundary scan methodology was developed for interconnect integrity and functional testing at hard to access electrical nodes. With boundary scan testing, active devices are used and failures can be identified to the specific device and lead. This technology permits the incorporation of "built in test" into almost any circuit and thus gives detailed test access to the highly integrated electronic assemblies. This presentation will describe boundary scan, discuss the development of the boundary scan test vehicle for DCA and current plans for testing of direct chip attach configurations.

7 CFR Exhibit D to Subpart B of... - Designated Counties for Housing Application Packaging Grants

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 13 2010-01-01 2009-01-01 true Designated Counties for Housing Application Packaging... Application Packaging Grants Pt. 1944, Subpt. B, Exh. D Exhibit D to Subpart B of Part 1944—Designated Counties for Housing Application Packaging Grants ER25my05.036 ER25my05.037 ER25my05.038 ER25my05.039 [70...

Predictive Utility of Marketed Volumetric Software Tools in Subjects at Risk for Alzheimer's: Do Regions Outside the Hippocampus Matter?

PubMed Central

Tanpitukpongse, Teerath P.; Mazurowski, Maciej A.; Ikhena, John; Petrella, Jeffrey R.

2016-01-01

Background and Purpose To assess prognostic efficacy of individual versus combined regional volumetrics in two commercially-available brain volumetric software packages for predicting conversion of patients with mild cognitive impairment to Alzheimer's disease. Materials and Methods Data was obtained through the Alzheimer's Disease Neuroimaging Initiative. 192 subjects (mean age 74.8 years, 39% female) diagnosed with mild cognitive impairment at baseline were studied. All had T1WI MRI sequences at baseline and 3-year clinical follow-up. Analysis was performed with NeuroQuant® and Neuroreader™. Receiver operating characteristic curves assessing the prognostic efficacy of each software package were generated using a univariable approach employing individual regional brain volumes, as well as two multivariable approaches (multiple regression and random forest), combining multiple volumes. Results On univariable analysis of 11 NeuroQuant® and 11 Neuroreader™ regional volumes, hippocampal volume had the highest area under the curve for both software packages (0.69 NeuroQuant®, 0.68 Neuroreader™), and was not significantly different (p > 0.05) between packages. Multivariable analysis did not increase the area under the curve for either package (0.63 logistic regression, 0.60 random forest NeuroQuant®; 0.65 logistic regression, 0.62 random forest Neuroreader™). Conclusion Of the multiple regional volume measures available in FDA-cleared brain volumetric software packages, hippocampal volume remains the best single predictor of conversion of mild cognitive impairment to Alzheimer's disease at 3-year follow-up. Combining volumetrics did not add additional prognostic efficacy. Therefore, future prognostic studies in MCI, combining such tools with demographic and other biomarker measures, are justified in using hippocampal volume as the only volumetric biomarker. PMID:28057634

DESIGN ANALYSIS FOR THE NAVAL SNF WASTE PACKAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

T.L. Mitchell

2000-05-31

The purpose of this analysis is to demonstrate the design of the naval spent nuclear fuel (SNF) waste package (WP) using the Waste Package Department's (WPD) design methodologies and processes described in the ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000b). The calculations that support the design of the naval SNF WP will be discussed; however, only a sub-set of such analyses will be presented and shall be limited to those identified in the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The objective of this analysis is to describe themore » naval SNF WP design method and to show that the design of the naval SNF WP complies with the ''Naval Spent Nuclear Fuel Disposal Container System Description Document'' (CRWMS M&O 1999a) and Interface Control Document (ICD) criteria for Site Recommendation. Additional criteria for the design of the naval SNF WP have been outlined in Section 6.2 of the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The scope of this analysis is restricted to the design of the naval long WP containing one naval long SNF canister. This WP is representative of the WPs that will contain both naval short SNF and naval long SNF canisters. The following items are included in the scope of this analysis: (1) Providing a general description of the applicable design criteria; (2) Describing the design methodology to be used; (3) Presenting the design of the naval SNF waste package; and (4) Showing compliance with all applicable design criteria. The intended use of this analysis is to support Site Recommendation reports and assist in the development of WPD drawings. Activities described in this analysis were conducted in accordance with the technical product development plan (TPDP) ''Design Analysis for the Naval SNF Waste Package (CRWMS M&O 2000a).« less

A GENERIC PACKAGING TECHNIQUE USING FLUIDIC ISOLATION FOR LOW-DRIFT IMPLANTABLE PRESSURE SENSORS.

PubMed

Kim, A; Powell, C R; Ziaie, B

2015-06-01

This paper reports on a generic packaging method for reducing drift in implantable pressure sensors. The described technique uses fluidic isolation by encasing the pressure sensor in a liquid-filled medical-grade polyurethane balloon; thus, isolating it from surrounding aqueous environment that is the major source of baseline drift. In-vitro tests using commercial micromachined piezoresistive pressure sensors show an average baseline drift of 0.006 cmH 2 O/day (0.13 mmHg/month) for over 100 days of saline soak test, as compared to 0.101 cmH 2 O/day (2.23 mmHg/month) for a non-fluidic-isolated one soaked for 18 days. To our knowledge, this is the lowest reported drift for an implantable pressure sensor.

Effectiveness of combination packages for HIV-1 prevention in sub-Saharan Africa depends on partnership network structure: a mathematical modelling study.

PubMed

Jenness, Samuel M; Goodreau, Steven M; Morris, Martina; Cassels, Susan

2016-12-01

Combination packages for HIV prevention can leverage the effectiveness of biomedical and behavioural elements to lower disease incidence with realistic targets for individual and population risk reduction. We investigated how sexual network structures can maximise the effectiveness of a package targeting sexually active adults in sub-Saharan Africa (SSA) with intervention components for medical male circumcision (MMC) and sexual partnership concurrency (having >1 ongoing partner). Network-based mathematical models of HIV type 1 (HIV-1) transmission dynamics among heterosexual couples were used to explore how changes to MMC alone and in combination with changes to concurrency impacted endemic HIV-1 prevalence and incidence. Starting from a base model parameterised from empirical data from West Africa, we simulated the prevalence of circumcision from 10% to 90% and concurrency was modelled at four discrete levels corresponding to values observed across SSA. MMC and concurrency could contribute to the empirical variation in HIV-1 disease prevalence across SSA. Small reductions in concurrency resulted in large declines in HIV-1 prevalence. Scaling up circumcision in low-concurrency settings yields a greater relative benefit, but the absolute number of infections averted depends on both the circumcision coverage and baseline incidence. Epidemic extinction with this package will require substantial scale-up of MMC in low-concurrency settings. Dynamic sexual network structure should be considered in the design and targeting of MMC within combination HIV-1 prevention packages. Realistic levels of coverage for these packages within southern Africa could lead to a reduction of incidence to the low levels observed in western Africa, and possibly, epidemic extinction. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The effects of instructions, incentive, and feedback on a community problem: dormitory noise.

PubMed

Meyers, A W; Artz, L M; Craighead, W E

A reinforcement system utilizing instructions, modelling, feedback, and group reinforcement was employed in an attempt to reduce disruptive noise on three university residence halls. A fourth hall received the same treatment program without the reinforcement component. Noise scores were determined by recording the number of discrete noise occurrences over a criterion decibel level. On all four residential floors, noise scores during treatment conditions were lower than initial and final baseline levels. Additionally, periods of noise reduction corresponded to the changing criterion multiple-baseline and reversal designs utilized. Pre- and posttreatment questionnaire responses from the three reinforcement floors paralleled changes in objective noise data. At posttreatment, residents reported less noise disturbance of study and sleep and more control over the noise situation and floor problems in general. These results indicated that a comprehensive behavior-modification treatment package was effective in reducing disruptive noise in university residence halls. Difficulties in data collection and anomalies in the data are discussed. Future directions for field-based behavior-modification research are outlined.

Word game bingo: a behavioral treatment package for improving textual responding to sight words.

PubMed Central

Kirby, K C; Holborn, S W; Bushby, H T

1981-01-01

Six third-grade students identified as deficient in reading skills tested the efficacy of word game bingo for acquisition and retention of sight word reading. The design was a modified multiple baseline in which treatment was implemented over 3 of 4 word sets and terminated on earlier sets when commencing treatment on later sets. Four sets of bingo cards were constructed on 7 X 9 cm paper divided into 25 equal-sized boxes. Sight words of each set were randomly placed into 24 of these boxes (the center box was marked "free"). Bingo winners were given tokens which were traded weekly for reinforcing activities. Noticeable improvements occurred for the word sets receiving the game treatment (sets A to C). Mean percentage points of improvement from baseline to treatment were approximately 30%. Terminal levels of correct responding exceeded 90%. Several variations of the game were suggested for future research and word game bingo was advocated as an effective behavioral technique or teachers to train sight word reading. PMID:7298541

A study to evaluate the acceptability, feasibility and impact of packaged interventions ("Diarrhea Pack") for prevention and treatment of childhood diarrhea in rural Pakistan.

PubMed

Habib, Muhammad Atif; Soofi, Sajid; Sadiq, Kamran; Samejo, Tariq; Hussain, Musawar; Mirani, Mushtaq; Rehmatullah, Asmatullah; Ahmed, Imran; Bhutta, Zulfiqar A

2013-10-03

Diarrhea remains one of the leading public health issues in developing countries and is a major contributor in morbidity and mortality in children under five years of age. Interventions such as ORS, Zinc, water purification and improved hygiene and sanitation can significantly reduce the diarrhea burden but their coverage remains low and has not been tested as packaged intervention before. This study attempts to evaluate the package of evidence based interventions in a "Diarrhea Pack" through first level health care providers at domiciliary level in community based settings. This study sought to evaluate the acceptability, feasibility and impact of diarrhea Pack on diarrhea burden. A cluster randomized design was used to evaluate the objectives of the project a union council was considered as a cluster for analysis, a total of eight clusters, four in intervention and four in control were included in the study. We conducted a baseline survey in all clusters followed by the delivery of diarrhea Pack in intervention clusters through community health workers at domiciliary level and through sales promoters to health care providers and pharmacies. Four quarterly surveillance rounds were conducted to evaluate the impact of diarrhea pack in all clusters by an independent team of Field workers. Both the intervention and control clusters were similar at the baseline but as the study progress we found a significant increase in uptake of ORS and Zinc along with the reduction in antibiotic use, diarrhea burden and hospitalization in intervention clusters when compared with the control clusters. We found that the Diarrhea Pack was well accepted with all of its components in the community. The intervention was well accepted and had a productive impact on the uptake of ORS and zinc and reduction in the use of antibiotics. It is feasible to deliver interventions such as diarrhea pack through community health workers in community settings. The intervention has the potential to be scaled up at national level.

49 CFR 173.411 - Industrial packages.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Each Type IP-1 package must meet the general design requirements prescribed in § 173.410. (2) Each Type IP-2 package must meet the general design requirements prescribed in § 173.410 and when subjected to...), “Requirements for the Design, Construction, Inspection and Testing of Portable Tanks and Multiple-Element Gas...

49 CFR 172.102 - Special provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... bags, each packaging must correspond to a design type that has passed a leakproofness test at the... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II... packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II...

Solar water heater design package

NASA Technical Reports Server (NTRS)

1981-01-01

Package describes commercial domestic-hot-water heater with roof or rack mounted solar collectors. System is adjustable to pre-existing gas or electric hot-water house units. Design package includes drawings, description of automatic control logic, evaluation measurements, possible design variations, list of materials and installation tools, and trouble-shooting guide and manual.

49 CFR 178.970 - Bottom lift test.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Large Packagings design types designed to be lifted from the base, there may be no permanent deformation which renders the Large Packaging unsafe for transport and there must be no loss of contents. ... permissible gross mass, the load being evenly distributed. (c) Test method. All Large Packaging design types...

49 CFR 178.970 - Bottom lift test.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Packagings design types designed to be lifted from the base, there may be no permanent deformation which renders the Large Packaging unsafe for transport and there must be no loss of contents. ... gross mass, the load being evenly distributed. (c) Test method. All Large Packaging design types must be...

49 CFR 178.970 - Bottom lift test.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Packagings design types designed to be lifted from the base, there may be no permanent deformation which renders the Large Packaging unsafe for transport and there must be no loss of contents. ... gross mass, the load being evenly distributed. (c) Test method. All Large Packaging design types must be...

49 CFR 178.970 - Bottom lift test.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Packagings design types designed to be lifted from the base, there may be no permanent deformation which renders the Large Packaging unsafe for transport and there must be no loss of contents. ... gross mass, the load being evenly distributed. (c) Test method. All Large Packaging design types must be...

49 CFR 178.970 - Bottom lift test.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Packagings design types designed to be lifted from the base, there may be no permanent deformation which renders the Large Packaging unsafe for transport and there must be no loss of contents. ... gross mass, the load being evenly distributed. (c) Test method. All Large Packaging design types must be...

Polymer dispensing and embossing technology for the lens type LED packaging

NASA Astrophysics Data System (ADS)

Chien, Chien-Lin Chang; Huang, Yu-Che; Hu, Syue-Fong; Chang, Chung-Min; Yip, Ming-Chuen; Fang, Weileun

2013-06-01

This study presents a ring-type micro-structure design on the substrate and its corresponding micro fabrication processes for a lens-type light-emitting diode (LED) package. The dome-type or crater-type silicone lenses are achieved by a dispensing and embossing process rather than a molding process. Silicone with a high viscosity and thixotropy index is used as the encapsulant material. The ring-type micro structure is adopted to confine the dispensed silicone encapsulant so as to form the packaged lens. With the architecture and process described, this LED package technology herein has three merits: (1) the flexibility of lens-type LED package designs is enhanced; (2) a dome-type package design is used to enhance the intensity; (3) a crater-type package design is used to enhance the view angle. Measurement results show the ratio between the lens height and lens radius can vary from 0.4 to 1 by changing the volume of dispensed silicone. The view angles of dome-type and crater-type packages can reach 155° ± 5° and 175° ± 5°, respectively. As compared with the commercial plastic leaded chip carrier-type package, the luminous flux of a monochromatic blue light LED is improved by 15% by the dome-type package (improved by 7% by the crater-type package) and the luminous flux of a white light LED is improved by 25% by the dome-type package (improved by 13% by the crater-type package). The luminous flux of monochromatic blue light LED and white light LED are respectively improved by 8% and 12% by the dome-type package as compare with the crater-type package.

Determination of the structure and heating mechanisms of coronal loops from soft X-ray observations with the solar probe. [grazing incidence telescope

NASA Technical Reports Server (NTRS)

Davis, J. M.; Krieger, A. S.

1978-01-01

High resolution soft X-ray imaging from the solar probe is justified in terms of the expected scientific returns which include the determination of the temperature and density structure of a coronal loop. The advantages of the grazing incidence telescope over the multiple pinhole camera are discussed. An instrument package is described which includes a grazing incidence mirror, a thermal prefilter, a three position filter wheel and a focal plane detector baselined as an 800 by 800 back-illuminated charge coupled device. The structural assembly together with the data processing equipment would draw heavily on the designs being developed for the Solar Polar Mission.

(Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30more » percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size.« less

General specifications for the development of a USL NASA PC R and D statistical analysis support package

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Bassari, Jinous; Triantafyllopoulos, Spiros

1984-01-01

The University of Southwestern Louisiana (USL) NASA PC R and D statistical analysis support package is designed to be a three-level package to allow statistical analysis for a variety of applications within the USL Data Base Management System (DBMS) contract work. The design addresses usage of the statistical facilities as a library package, as an interactive statistical analysis system, and as a batch processing package.

Space station power semiconductor package

NASA Technical Reports Server (NTRS)

Balodis, Vilnis; Berman, Albert; Devance, Darrell; Ludlow, Gerry; Wagner, Lee

1987-01-01

A package of high-power switching semiconductors for the space station have been designed and fabricated. The package includes a high-voltage (600 volts) high current (50 amps) NPN Fast Switching Power Transistor and a high-voltage (1200 volts), high-current (50 amps) Fast Recovery Diode. The package features an isolated collector for the transistors and an isolated anode for the diode. Beryllia is used as the isolation material resulting in a thermal resistance for both devices of .2 degrees per watt. Additional features include a hermetical seal for long life -- greater than 10 years in a space environment. Also, the package design resulted in a low electrical energy loss with the reduction of eddy currents, stray inductances, circuit inductance, and capacitance. The required package design and device parameters have been achieved. Test results for the transistor and diode utilizing the space station package is given.

Lessons Learned in the Design and Use of IP1 / IP2 Flexible Packaging - 13621

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez, Mike; Reeves, Wendall; Smart, Bill

2013-07-01

For many years in the USA, Low Level Radioactive Waste (LLW), contaminated soils and construction debris, have been transported, interim stored, and disposed of, using IP1 / IP2 metal containers. The performance of these containers has been more than adequate, with few safety occurrences. The containers are used under the regulatory oversight of the US Department of Transportation (DOT), 49 Code of Federal Regulations (CFR). In the late 90's the introduction of flexible packaging for the transport, storage, and disposal of low level contaminated soils and construction debris was introduced. The development of flexible packaging came out of a needmore » for a more cost effective package, for the large volumes of waste generated by the decommissioning of many of the US Department of Energy (DOE) legacy sites across the US. Flexible packaging had to be designed to handle a wide array of waste streams, including soil, gravel, construction debris, and fine particulate dust migration. The design also had to meet all of the IP1 requirements under 49CFR 173.410, and be robust enough to pass the IP2 testing 49 CFR 173.465 required for many LLW shipments. Tens of thousands of flexible packages have been safely deployed and used across the US nuclear industry as well as for hazardous non-radioactive applications, with no recorded release of radioactive materials. To ensure that flexible packages are designed properly, the manufacturer must use lessons learned over the years, and the tests performed to provide evidence that these packages are suitable for transporting low level radioactive wastes. The design and testing of flexible packaging for LLW, VLLW and other hazardous waste streams must be as strict and stringent as the design and testing of metal containers. The design should take into consideration the materials being loaded into the package, and should incorporate the right materials, and manufacturing methods, to provide a quality, safe product. Flexible packaging can be shown to meet the criteria for safe and fit for purpose packaging, by meeting the US DOT regulations, and the IAEA Standards for IP-1 and IP-2 including leak tightness. (authors)« less

Cute as candy: a qualitative study of perceptions of snus branding and package design among youth in Norway

PubMed Central

Scheffels, Janne; Lund, Ingeborg

2017-01-01

Objectives Snus use has increased among youth in Norway in recent years and is now more prevalent than smoking. Concurrently, a range of new products and package designs have been introduced to the market. The aim of this study was to explore how youth perceive snus branding and package design, and the role, if any, of snus packaging on perceptions of appeal and harm of snus among youth. Participants Adolescent tobacco users and non-users (N=35) ages 15–17 years. Design We conducted interviews among 6 focus groups (each with 4–7 participants). Participants were shown snus packages with a variety of designs and with different product qualities (flavour additives, slim, regular, white and brown sachets) and group discussions focused on how they perceived packages and products. The focus group discussions were semistructured using a standard guide, and analysed thematically. Results The participants in the focus groups narrated distinct images of snus brands and associated user identities. Package design elements such as shapes, colours, images and fonts were described as guiding these perceptions. Packaging elements and flavour additives were associated with perceptions of product harm. The appeal of flavoured snus products and new types of snus sachets seemed to blend in with these processes, reinforcing positive attitudes and contributing to the creation of particular identities for products and their users. Conclusions The findings indicate that packaging is vital to consumer's identification with, and differentiation between, snus brands. In view of this, snus branding and packaging can be seen as fulfilling a similar promotional role as advertising messages: generating preferences and appeal. PMID:28373248

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

NASA Technical Reports Server (NTRS)

Shalkhauser, K. A.; Li, K.; Shih, Y. C.

1992-01-01

Packaging schemes were developed that provide low-loss, hermetic enclosure for advanced monolithic microwave and millimeter-wave integrated circuits (MMICs). The package designs are based on a fused quartz substrate material that offers improved radio frequency (RF) performance through 44 gigahertz (GHz). The small size and weight of the packages make them appropriate for a variety of applications, including phased array antenna systems. Packages were designed in two forms; one for housing a single MMIC chip, the second in the form of a multi-chip phased array module. The single chip array module was developed in three separate sizes, for chips of different geometry and frequency requirements. The phased array module was developed to address packaging directly for antenna applications, and includes transmission line and interconnect structures to support multi-element operation. All packages are fabricated using fused quartz substrate materials. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices. The package and test fixture designs were both developed in a generic sense, optimizing performance for a wide range of possible applications and devices.

Design requirements for SRB production control system. Volume 3: Package evaluation, modification and hardware

NASA Technical Reports Server (NTRS)

1981-01-01

The software package evaluation was designed to analyze commercially available, field-proven, production control or manufacturing resource planning management technology and software package. The analysis was conducted by comparing SRB production control software requirements and conceptual system design to software package capabilities. The methodology of evaluation and the findings at each stage of evaluation are described. Topics covered include: vendor listing; request for information (RFI) document; RFI response rate and quality; RFI evaluation process; and capabilities versus requirements.

Application of Quality by Design (QbD) Principles to Extractables/Leachables Assessment. Establishing a Design Space for Terminally Sterilized Aqueous Drug Products Stored in a Plastic Packaging System.

PubMed

Jenke, Dennis

2010-01-01

The concept of quality by design (QbD) reflects the current global regulatory thinking related to pharmaceutical products. A cornerstone of the QbD paradigm is the concept of a design space, where the design space is a multidimensional combination of input variables and process parameters that have been demonstrated to provide the assurance of product quality. If a design space can be established for a pharmaceutical process or product, then operation within the design space confirms that the product or process output possesses the required quality attributes. This concept of design space can be applied to the safety (leachables) assessment of drug products manufactured and stored in packaging systems. Critical variables in such a design space would include those variables that affect the interaction of the drug product and its packaging, including (a) composition of the drug product, (b) composition of the packaging system, (c) configuration of the packaging system, and (d) the conditions of contact. This paper proposes and justifies such a leachables design space for aqueous drug products packaged in a specific plastic packaging system. Such a design space has the following boundaries:Aqueous drug products with a pH in the range of 2 to 8 and that contain no polarity-impacting agents such as organic solubilizers and stabilizers (addressing variable a). Packaging systems manufactured from materials that meet the system's existing material specifications (addressing variable b). Nominal fill volumes from 50 to 1000 mL (addressing variable c). Products subjected to terminal sterilization and then stored at room temperature for a period of up to 24 months (addressing variable d). The ramification of such a design space is that any drug product that falls within these boundaries is deemed to be compatible with the packaging system, from the perspective of safety, without the requirement of supporting drug product testing. When drug products are packaged in plastic container systems, substances may leach from the container and accumulate in the product. It is necessary that the drug product's vendor demonstrate that any such leaching does not occur to the extent that the leached substances adversely affect the product's safety and/or efficacy. One method for accomplishing this objective is via analysis of the drug product to identify and quantify the leached substances. When a particular packaging system is utilized for multiple drug products, one reaches the point, after testing numerous drug products, where the leaching properties of the packaging system are well known and readily predictable. In such a case, testing of additional products in the same packaging system produces no new information and thus becomes redundant and unnecessary. The quality by design (QbD) principle can be simply stated as follows: once a system has been tested to the extent that the test results are predictable, further testing can be replaced by establishing that the system was operating within a defined design space. The purpose of this paper is to demonstrate the application of QbD principles to a packaging system that has been utilized with over 12 parenteral drug products. The paper concludes that the leachables profile of all drug products that fit a certain description (the design space) is known and predicable.

Qualitative assessment of a Context of Consumption Framework to inform regulation of cigarette pack design in the U.S.

PubMed

Lee, Joseph G L; Averett, Paige E; Blanchflower, Tiffany; Gregory, Kyle R

2018-02-01

Researchers and regulators need to know how changes to cigarette packages can influence population health. We sought to advance research on the role of cigarette packaging by assessing a theory-informed framework from the fields of design and consumer research. The selected Context of Consumption Framework posits cognitive, affective, and behavioral responses to visual design. To assess the Framework's potential for guiding research on the visual design of cigarette packaging in the U.S., this study seeks to understand to what extent the Context of Consumption Framework converges with how adult smokers think and talk about cigarette pack designs. Data for this qualitative study came from six telephone-based focus groups conducted in March 2017. Two groups consisted of lesbian, gay, and bisexual participants; two groups of participants with less than four years college education; one group of LGB and straight identity; and one group the general population. All groups were selected for regional, gender, and racial/ethnic diversity. Participants (n=33) represented all nine U.S. Census divisions. We conducted a deductive qualitative analysis. Cigarette package designs captured the participants' attention, suggested the characteristics of the product, and reflected (or could be leveraged to convey) multiple dimensions of consumer identity. Particular to the affective responses to design, our participants shared that cigarette packaging conveyed how the pack could be used to particular ends, created an emotional response to the designs, complied with normative expectations of a cigarette, elicited interest when designs change, and prompted fascination when unique design characteristics are used. Use of the Context of Consumption Framework for cigarette product packaging design can inform regulatory research on tobacco product packaging. Researchers and regulators should consider multiple cognitive, affective, and behavioral responses to cigarette pack design.

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... the meaning of this paragraph (b)(3). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that do not create a separate and distinct intangible asset within the meaning of this paragraph (b)(3). For purposes of this section, the term package design means the...

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the meaning of this paragraph (b)(3). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that do not create a separate and distinct intangible asset within the meaning of this paragraph (b)(3). For purposes of this section, the term package design means the...

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the meaning of this paragraph (b)(3). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that do not create a separate and distinct intangible asset within the meaning of this paragraph (b)(3). For purposes of this section, the term package design means the...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for liquids and gases. 173.466 Section 173.466 Transportation Other Regulations Relating to...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

XAPiir: A recursive digital filtering package

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, D.

1990-09-21

XAPiir is a basic recursive digital filtering package, containing both design and implementation subroutines. XAPiir was developed for the experimental array processor (XAP) software package, and is written in FORTRAN. However, it is intended to be incorporated into any general- or special-purpose signal analysis program. It replaces the older package RECFIL, offering several enhancements. RECFIL is used in several large analysis programs developed at LLNL, including the seismic analysis package SAC, several expert systems (NORSEA and NETSEA), and two general purpose signal analysis packages (SIG and VIEW). This report is divided into two sections: the first describes the use ofmore » the subroutine package, and the second, its internal organization. In the first section, the filter design problem is briefly reviewed, along with the definitions of the filter design parameters and their relationship to the subroutine input parameters. In the second section, the internal organization is documented to simplify maintenance and extensions to the package. 5 refs., 9 figs.« less

Naval Waste Package Design Sensitivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

T. Schmitt

2006-12-13

The purpose of this calculation is to determine the sensitivity of the structural response of the Naval waste packages to varying inner cavity dimensions when subjected to a comer drop and tip-over from elevated surface. This calculation will also determine the sensitivity of the structural response of the Naval waste packages to the upper bound of the naval canister masses. The scope of this document is limited to reporting the calculation results in terms of through-wall stress intensities in the outer corrosion barrier. This calculation is intended for use in support of the preliminary design activities for the license applicationmore » design of the Naval waste package. It examines the effects of small changes between the naval canister and the inner vessel, and in these dimensions, the Naval Long waste package and Naval Short waste package are similar. Therefore, only the Naval Long waste package is used in this calculation and is based on the proposed potential designs presented by the drawings and sketches in References 2.1.10 to 2.1.17 and 2.1.20. All conclusions are valid for both the Naval Long and Naval Short waste packages.« less

Spacecraft System Integration and Test: SSTI Lewis critical design audit

NASA Technical Reports Server (NTRS)

Brooks, R. P.; Cha, K. K.

1995-01-01

The Critical Design Audit package is the final detailed design package which provides a comprehensive description of the SSTI mission. This package includes the program overview, the system requirements, the science and applications activities, the ground segment development, the assembly, integration and test description, the payload and technology demonstrations, and the spacecraft bus subsystems. Publication and presentation of this document marks the final requirements and design freeze for SSTI.

[Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 9, Removal action system design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30more » percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size.« less

49 CFR 178.905 - Large Packaging identification codes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Large Packaging identification codes. 178.905... FOR PACKAGINGS Large Packagings Standards § 178.905 Large Packaging identification codes. Large packaging code designations consist of: two numerals specified in paragraph (a) of this section; followed by...

WRAP-RIB antenna technology development

NASA Technical Reports Server (NTRS)

Freeland, R. E.; Garcia, N. F.; Iwamoto, H.

1985-01-01

The wrap-rib deployable antenna concept development is based on a combination of hardware development and testing along with extensive supporting analysis. The proof-of-concept hardware models are large in size so they will address the same basic problems associated with the design fabrication, assembly and test as the full-scale systems which were selected to be 100 meters at the beginning of the program. The hardware evaluation program consists of functional performance tests, design verification tests and analytical model verification tests. Functional testing consists of kinematic deployment, mesh management and verification of mechanical packaging efficiencies. Design verification consists of rib contour precision measurement, rib cross-section variation evaluation, rib materials characterizations and manufacturing imperfections assessment. Analytical model verification and refinement include mesh stiffness measurement, rib static and dynamic testing, mass measurement, and rib cross-section characterization. This concept was considered for a number of potential applications that include mobile communications, VLBI, and aircraft surveillance. In fact, baseline system configurations were developed by JPL, using the appropriate wrap-rib antenna, for all three classes of applications.

Apollo experience report: Food systems

NASA Technical Reports Server (NTRS)

Smith, M. C., Jr.; Rapp, R. M.; Huber, C. S.; Rambaut, P. C.; Heidelbaugh, N. D.

1974-01-01

Development, delivery, and use of food systems in support of the Apollo 7 to 14 missions are discussed. Changes in design criteria for this unique program as mission requirements varied are traced from the baseline system that was established before the completion of the Gemini Program. Problems and progress in subsystem management, material selection, food packaging, development of new food items, menu design, and food-consumption methods under zero-gravity conditions are described. The effectiveness of various approaches in meeting food system objectives of providing flight crews with safe, nutritious, easy to prepare, and highly acceptable foods is considered. Nutritional quality and adequacy in maintaining crew health are discussed in relation to the establishment of nutritional criteria for future missions. Technological advances that have resulted from the design of separate food systems for the command module, the lunar module, The Mobile Quarantine Facility, and the Lunar Receiving Laboratory are presented for application to future manned spacecraft and to unique populations in earthbound situations.

The use of structural analysis to develop antecedent-based interventions for students with autism.

PubMed

Stichter, Janine P; Randolph, Jena K; Kay, Denise; Gage, Nicholas

2009-06-01

Evidence continues to maintain that the use of antecedent variables (i.e., instructional practices, and environmental characteristics) increase prosocial and adaptive behaviors of students with disabilities (e.g., Kern et al. in J Appl Behav Anal 27(1):7-19, 1994; Stichter et al. in Behav Disord 30:401-418, 2005). This study extends the literature by systematically utilizing practitioner-implemented structural analyzes within school settings to determine antecedent variables affecting the prosocial behavior of students with autism. Optimal antecedents were combined into intervention packages and assessed utilizing a multiple baseline design across settings. All three students demonstrated improvement across all three settings. Rates of engagement and social interaction were obtained from classroom peers to serve as benchmark data. Findings indicate that practitioners can implement structural analyzes and design corresponding interventions for students with ASD within educational settings.

Supersonic Retropropulsion Flight Test Concepts

NASA Technical Reports Server (NTRS)

Post, Ethan A.; Dupzyk, Ian C.; Korzun, Ashley M.; Dyakonov, Artem A.; Tanimoto, Rebekah L.; Edquist, Karl T.

2011-01-01

NASA's Exploration Technology Development and Demonstration Program has proposed plans for a series of three sub-scale flight tests at Earth for supersonic retropropulsion, a candidate decelerator technology for future, high-mass Mars missions. The first flight test in this series is intended to be a proof-of-concept test, demonstrating successful initiation and operation of supersonic retropropulsion at conditions that replicate the relevant physics of the aerodynamic-propulsive interactions expected in flight. Five sub-scale flight test article concepts, each designed for launch on sounding rockets, have been developed in consideration of this proof-of-concept flight test. Commercial, off-the-shelf components are utilized as much as possible in each concept. The design merits of the concepts are compared along with their predicted performance for a baseline trajectory. The results of a packaging study and performance-based trade studies indicate that a sounding rocket is a viable launch platform for this proof-of-concept test of supersonic retropropulsion.

Design Package for Fuel Retrieval System Fuel Handling Tool Modification

DOE Office of Scientific and Technical Information (OSTI.GOV)

TEDESCHI, D.J.

This design package documents design, fabrication, and testing of new stinger tool design. Future revisions will document further development of the stinger tool and incorporate various developmental stages, and final test results.

Variable effects of a behavioral treatment package on the performance of inline roller speed skaters.

PubMed Central

Anderson, Gayla; Kirkpatrick, Michael A

2002-01-01

We investigated the effects of a treatment package on the performance of correct relay tags with 4 inline speed skaters. The treatment package included verbal praise following correct tags, visual feedback of performance data, and instruction for improving performance. Initial gains in the frequency of correct tags were not maintained at 6-month follow-up when baselines were reestablished. Performance on the second intervention phase for the 3 original subjects was variable and differed from the initial phase, whereas the original findings were replicated in the 4th subject. Possible reasons for this variability and implications for future research and behavioral sport interventions are considered. PMID:12102140

Variable effects of a behavioral treatment package on the performance of inline roller speed skaters.

PubMed

Anderson, Gayla; Kirkpatrick, Michael A

2002-01-01

We investigated the effects of a treatment package on the performance of correct relay tags with 4 inline speed skaters. The treatment package included verbal praise following correct tags, visual feedback of performance data, and instruction for improving performance. Initial gains in the frequency of correct tags were not maintained at 6-month follow-up when baselines were reestablished. Performance on the second intervention phase for the 3 original subjects was variable and differed from the initial phase, whereas the original findings were replicated in the 4th subject. Possible reasons for this variability and implications for future research and behavioral sport interventions are considered.

Integrated Baseline System (IBS). Version 1.03, System Management Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, J.R.; Bailey, S.; Bower, J.C.

This IBS System Management Guide explains how to install or upgrade the Integrated Baseline System (IBS) software package. The IBS is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This guide includes detailed instructions for installing the IBS software package on a Digital Equipment Corporation (DEC) VAX computer from the IBS distribution tapes. The installation instructions include procedures for both first-time installations and upgrades to existing IBS installations. To ensure that the system manager has the background necessary for successful installation of the IBS package, this guide alsomore » includes information on IBS computer requirements, software organization, and the generation of IBS distribution tapes. When special utility programs are used during IBS installation and setups, this guide refers you to the IBS Utilities Guide for specific instructions. This guide also refers you to the IBS Data Management Guide for detailed descriptions of some IBS data files and structures. Any special requirements for installation are not documented here but should be included in a set of installation notes that come with the distribution tapes.« less

Cute as candy: a qualitative study of perceptions of snus branding and package design among youth in Norway.

PubMed

Scheffels, Janne; Lund, Ingeborg

2017-04-03

Snus use has increased among youth in Norway in recent years and is now more prevalent than smoking. Concurrently, a range of new products and package designs have been introduced to the market. The aim of this study was to explore how youth perceive snus branding and package design, and the role, if any, of snus packaging on perceptions of appeal and harm of snus among youth. Adolescent tobacco users and non-users (N=35) ages 15-17 years. We conducted interviews among 6 focus groups (each with 4-7 participants). Participants were shown snus packages with a variety of designs and with different product qualities (flavour additives, slim, regular, white and brown sachets) and group discussions focused on how they perceived packages and products. The focus group discussions were semistructured using a standard guide, and analysed thematically. The participants in the focus groups narrated distinct images of snus brands and associated user identities. Package design elements such as shapes, colours, images and fonts were described as guiding these perceptions. Packaging elements and flavour additives were associated with perceptions of product harm. The appeal of flavoured snus products and new types of snus sachets seemed to blend in with these processes, reinforcing positive attitudes and contributing to the creation of particular identities for products and their users. The findings indicate that packaging is vital to consumer's identification with, and differentiation between, snus brands. In view of this, snus branding and packaging can be seen as fulfilling a similar promotional role as advertising messages: generating preferences and appeal. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

"Plain packaging" regulations for tobacco products: the impact of standardizing the color and design of cigarette packs.

PubMed

Hammond, David

2010-01-01

Tobacco packaging and labeling policies have emerged as prominent and cost-effective tobacco control measures. Although packaging policies have primarily focused on health warnings, there is growing recognition of the importance of packaging as a marketing tool for the tobacco industry. The current paper reviews evidence on the potential impact of standardizing the color and design of tobacco packages -so called "plain" packaging. The evidence indicates three primary benefits of plain packaging: increasing the effectiveness of health warnings, reducing false health beliefs about cigarettes, and reducing brand appeal especially among youth and young adults. Overall, the research to date suggests that "plain" packaging regulations would be an effective tobacco control measure, particularly in jurisdictions with comprehensive restrictions on other forms of marketing.

Miniature interferometer terminals for earth surveying

NASA Technical Reports Server (NTRS)

Counselman, C. C., III; Shapiro, I. I.

1978-01-01

A system of miniature radio interferometer terminals was proposed for the measurement of vector baselines with uncertainties ranging from the millimeter to the centimeter level for baseline lengths ranging, respectively, from a few to a few hundred kilometers. Each terminal would have no moving parts, could be packaged in a volume of less than 0.1 cu m, and would operate unattended. These units would receive radio signals from low-power (10 w) transmitters on earth-orbiting satellites. The baselines between units could be determined virtually instantaneously and monitored continuously as long as at least four satellites were visible simultaneously.

Effect of Packaging on Shelf-life and Lutein Content of Marigold (Tagetes erecta L.) Flowers.

PubMed

Pal, Sayani; Ghosh, Probir Kumar; Bhattacharjee, Paramita

2016-01-01

African marigold (Tagetes erecta L.) flowers are highly valued for their ornamental appeal as well as medicinal properties. However, their short shelf lives cause high post-harvest loss and limit their export potential. The review of patents and research articles revealed that different types of packaging designs/materials have been successfully employed for extension of shelf lives of cut flowers. The current work focuses on designing of different packaging configurations and selection of best configuration for preservation of marigold cut flowers. Ten packaging configurations, composed of four different packaging materials i.e., low density polyethylene (LDPE), polyethylene terephthalate, glassine paper and cellophane paper, were designed. Each pack, consisting of 20 ± 1 g of marigold flowers along with non-packaged control set were stored at 23 ± 2°C, 80% R.H., in an environmental chamber and the flowers were evaluated for their sensory attributes, phytochemical characteristics and physicochemical parameters of senescence to determine their shelf lives. Flowers packed in LDPE bag showed highest shelf life of 8 days with a lead of 4 days compared to control (shelf life - 4 days). This study also established for the first time the phenomenon of carotenogenesis in marigold cut flowers with significantly (P<0.01) higher production of lutein in LDPE packaged flowers. LDPE pack was the best design among the ten package designs, in preserving lutein content of marigold flowers and extending their shelf lives. This economically viable packaging can not only boost the export potential of this ornamental flower, but also allow utilization of nutraceutical potency of lutein.

49 CFR 173.415 - Authorized Type A packages.

Code of Federal Regulations, 2014 CFR

2014-10-01

... tests and an engineering evaluation or comparative data showing that the construction methods, packaging design, and materials of construction comply with that specification. After January 1, 2017 each offeror... meets the pertinent design and performance requirements for a DOT 7A Type A specification package. (2...

27 CFR 45.43 - Notice for smokeless tobacco.

Code of Federal Regulations, 2010 CFR

2010-04-01

... for smokeless tobacco. (a) Product designation. Every package of chewing tobacco or snuff shall..., the designation “chewing tobacco” or “snuff.” As an alternative, packages of chewing tobacco may be... package of chewing tobacco or snuff shall, before removal under this part, have adequately imprinted...

Apparatus and methods for packaging integrated circuit chips with antenna modules providing closed electromagnetic environment for integrated antennas

NASA Technical Reports Server (NTRS)

Gaucher, Brian P. (Inventor); Grzyb, Janusz (Inventor); Liu, Duixian (Inventor); Pfeiffer, Ullrich R. (Inventor)

2008-01-01

Apparatus and methods are provided for packaging IC chips together with integrated antenna modules designed to provide a closed EM (electromagnetic) environment for antenna radiators, thereby allowing antennas to be designed independent from the packaging technology.

Predictive Utility of Marketed Volumetric Software Tools in Subjects at Risk for Alzheimer Disease: Do Regions Outside the Hippocampus Matter?

PubMed

Tanpitukpongse, T P; Mazurowski, M A; Ikhena, J; Petrella, J R

2017-03-01

Alzheimer disease is a prevalent neurodegenerative disease. Computer assessment of brain atrophy patterns can help predict conversion to Alzheimer disease. Our aim was to assess the prognostic efficacy of individual-versus-combined regional volumetrics in 2 commercially available brain volumetric software packages for predicting conversion of patients with mild cognitive impairment to Alzheimer disease. Data were obtained through the Alzheimer's Disease Neuroimaging Initiative. One hundred ninety-two subjects (mean age, 74.8 years; 39% female) diagnosed with mild cognitive impairment at baseline were studied. All had T1-weighted MR imaging sequences at baseline and 3-year clinical follow-up. Analysis was performed with NeuroQuant and Neuroreader. Receiver operating characteristic curves assessing the prognostic efficacy of each software package were generated by using a univariable approach using individual regional brain volumes and 2 multivariable approaches (multiple regression and random forest), combining multiple volumes. On univariable analysis of 11 NeuroQuant and 11 Neuroreader regional volumes, hippocampal volume had the highest area under the curve for both software packages (0.69, NeuroQuant; 0.68, Neuroreader) and was not significantly different ( P > .05) between packages. Multivariable analysis did not increase the area under the curve for either package (0.63, logistic regression; 0.60, random forest NeuroQuant; 0.65, logistic regression; 0.62, random forest Neuroreader). Of the multiple regional volume measures available in FDA-cleared brain volumetric software packages, hippocampal volume remains the best single predictor of conversion of mild cognitive impairment to Alzheimer disease at 3-year follow-up. Combining volumetrics did not add additional prognostic efficacy. Therefore, future prognostic studies in mild cognitive impairment, combining such tools with demographic and other biomarker measures, are justified in using hippocampal volume as the only volumetric biomarker. © 2017 by American Journal of Neuroradiology.

Flexible Packaging by Film-Assisted Molding for Microintegration of Inertia Sensors

PubMed Central

Hera, Daniel; Berndt, Armin; Günther, Thomas; Schmiel, Stephan; Harendt, Christine; Zimmermann, André

2017-01-01

Packaging represents an important part in the microintegration of sensors based on microelectromechanical system (MEMS). Besides miniaturization and integration density, functionality and reliability in combination with flexibility in packaging design at moderate costs and consequently high-mix, low-volume production are the main requirements for future solutions in packaging. This study investigates possibilities employing printed circuit board (PCB-)based assemblies to provide high flexibility for circuit designs together with film-assisted transfer molding (FAM) to package sensors. The feasibility of FAM in combination with PCB and MEMS as a packaging technology for highly sensitive inertia sensors is being demonstrated. The results prove the technology to be a viable method for damage-free packaging of stress- and pressure-sensitive MEMS. PMID:28653992

16 CFR 1700.3 - Establishment of standards for special packaging.

Code of Federal Regulations, 2011 CFR

2011-01-01

... standard; (2) Available scientific, medical, and engineering data concerning special packaging and... such standards, the Commission shall not prescribe specific packaging designs, product content, package... such substance in a package which the Commission determines is unnecessarily attractive to children. (e...

16 CFR 1700.3 - Establishment of standards for special packaging.

Code of Federal Regulations, 2010 CFR

2010-01-01

... standard; (2) Available scientific, medical, and engineering data concerning special packaging and... such standards, the Commission shall not prescribe specific packaging designs, product content, package... such substance in a package which the Commission determines is unnecessarily attractive to children. (e...

16 CFR 1700.3 - Establishment of standards for special packaging.

Code of Federal Regulations, 2012 CFR

2012-01-01

... standard; (2) Available scientific, medical, and engineering data concerning special packaging and... such standards, the Commission shall not prescribe specific packaging designs, product content, package... such substance in a package which the Commission determines is unnecessarily attractive to children. (e...

16 CFR 1700.3 - Establishment of standards for special packaging.

Code of Federal Regulations, 2014 CFR

2014-01-01

... standard; (2) Available scientific, medical, and engineering data concerning special packaging and... such standards, the Commission shall not prescribe specific packaging designs, product content, package... such substance in a package which the Commission determines is unnecessarily attractive to children. (e...

Test report dot 7A type a liquid packaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ketusky, E. T.; Brandjes, C.; Benoit, T. J.

This test report documents the performance of Savannah River National Laboratory’s (SRNL’s) U.S. Department of Transportation (DOT) Specification 7A; General Packaging, Type A shielded liquid shipping packaging and compliance with the regulatory requirements of Title 49 of the Code of Federal Regulations (CFR). The primary use of this packaging design is for the transport of radioactive liquids of up to 1.3 liters in an unshielded configuration and up to 113 mL of radioactive liquids in a shielded configuration, with no more than an A2 quantity in either configuration, over public highways and/or commercial aircraft. The contents are liquid radioactive materialsmore » sufficiently shielded and within the activity limits specified in173.435 or 173.433 for A2 (normal form) materials, as well as within the analyzed thermal heat limits. Any contents must be compatibly packaged and must be compatible with the packaging. The basic packaging design is based on the U.S. Department of Energy’s (DOE’s) Model 9979 Type A fissile shipping packaging designed and tested by SRNL. The shielded liquid configuration consists of the outer and inner drums of the 9979 package with additional low density polyethylene (LDPE) dunnage nesting a tungsten shielded cask assembly (WSCA) within the 30-gallon inner drum. The packaging model for the DOT Specification 7A, Type A liquids packaging is HVYTAL.« less

49 CFR 178.707 - Standards for composite IBCs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... designed to bear the entire stacking load. The inner receptacle and outer packaging form an integral... outer packaging. (2) A composite IBC with a fully enclosing outer packaging must be designed to permit assessment of the integrity of the inner container following the leakproofness and hydraulic tests. The outer...

49 CFR 178.975 - Top lift test.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the test. For all Large Packagings design types designed to be lifted from the top, there may be no permanent deformation which renders the Large Packagings unsafe for transport and no loss of contents. ... load being evenly distributed. (c) Test method. (1) A Large Packaging must be lifted in the manner for...

27 CFR 40.216 - Notice for smokeless tobacco.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Notice for smokeless tobacco. (a) Product designation. Every package of chewing tobacco or snuff shall..., the designation “chewing tobacco” or “snuff.” As an alternative, packages of chewing tobacco may be... package of chewing tobacco or snuff shall, before removal subject to tax, have adequately imprinted...

Advanced Spacesuit Portable Life Support System Packaging Concept Mock-Up Design & Development

NASA Technical Reports Server (NTRS)

O''Connell, Mary K.; Slade, Howard G.; Stinson, Richard G.

1998-01-01

A concentrated development effort was begun at NASA Johnson Space Center to create an advanced Portable Life Support System (PLSS) packaging concept. Ease of maintenance, technological flexibility, low weight, and minimal volume are targeted in the design of future micro-gravity and planetary PLSS configurations. Three main design concepts emerged from conceptual design techniques and were carried forth into detailed design, then full scale mock-up creation. "Foam", "Motherboard", and "LEGOtm" packaging design concepts are described in detail. Results of the evaluation process targeted maintenance, robustness, mass properties, and flexibility as key aspects to a new PLSS packaging configuration. The various design tools used to evolve concepts into high fidelity mock ups revealed that no single tool was all encompassing, several combinations were complimentary, the devil is in the details, and, despite efforts, many lessons were learned only after working with hardware.

Qualitative assessment of a Context of Consumption Framework to inform regulation of cigarette pack design in the U.S

PubMed Central

Lee, Joseph G. L.; Averett, Paige E.; Blanchflower, Tiffany; Gregory, Kyle R.

2018-01-01

INTRODUCTION Researchers and regulators need to know how changes to cigarette packages can influence population health. We sought to advance research on the role of cigarette packaging by assessing a theory-informed framework from the fields of design and consumer research. The selected Context of Consumption Framework posits cognitive, affective, and behavioral responses to visual design. To assess the Framework’s potential for guiding research on the visual design of cigarette packaging in the U.S., this study seeks to understand to what extent the Context of Consumption Framework converges with how adult smokers think and talk about cigarette pack designs. METHODS Data for this qualitative study came from six telephone-based focus groups conducted in March 2017. Two groups consisted of lesbian, gay, and bisexual participants; two groups of participants with less than four years college education; one group of LGB and straight identity; and one group the general population. All groups were selected for regional, gender, and racial/ethnic diversity. Participants (n=33) represented all nine U.S. Census divisions. We conducted a deductive qualitative analysis. RESULTS Cigarette package designs captured the participants’ attention, suggested the characteristics of the product, and reflected (or could be leveraged to convey) multiple dimensions of consumer identity. Particular to the affective responses to design, our participants shared that cigarette packaging conveyed how the pack could be used to particular ends, created an emotional response to the designs, complied with normative expectations of a cigarette, elicited interest when designs change, and prompted fascination when unique design characteristics are used. CONCLUSIONS Use of the Context of Consumption Framework for cigarette product packaging design can inform regulatory research on tobacco product packaging. Researchers and regulators should consider multiple cognitive, affective, and behavioral responses to cigarette pack design. PMID:29593883

Distance education methods are useful for delivering education to palliative caregivers: A single-arm trial of an education package (PalliativE Caregivers Education Package).

PubMed

Forbat, Liz; Robinson, Rowena; Bilton-Simek, Rachel; Francois, Karemah; Lewis, Marsha; Haraldsdottir, Erna

2018-02-01

Face-to-face/group education for palliative caregivers is successful, but relies on caregivers travelling, being absent from the patient, and rigid timings. This presents inequities for those in rural locations. To design and test an innovative distance-learning educational package (PrECEPt: PalliativE Caregivers Education Package). Single-arm mixed-method feasibility proof-of-concept trial (ACTRN12616000601437). The primary outcome was carer self-efficacy, with secondary outcomes focused on caregiver preparedness and carer tasks/needs. Analysis focused on three outcome measures (taken at baseline and 6 weeks) and feasibility/acceptability qualitative data. A single specialist palliative care service. Eligible informal caregivers were those of patients registered with the outpatient or community service, where the patient had a prognosis of ⩾12 weeks, supporting someone with nutrition/hydration and/or pain management needs, proficient in English and no major mental health diagnosis. Two modules were developed and tested (nutrition/hydration and pain management) with 18 caregivers. The materials did not have a statistically significant impact on carer self-efficacy. However, statistically significant improvements were observed on the two subsidiary measures of (1) caregiving tasks, consequences and needs ( p = 0.03, confidence interval: 0.72, 9.4) and (2) caregiver preparedness ( p = 0.001, confidence interval: -1.22, -0.46). The study determined that distance learning is acceptable and feasible for both caregivers and healthcare professionals. Distance education improves caregiver preparedness and is a feasible and acceptable approach. A two-arm trial would determine whether the materials benefitted caregivers and patients compared to a control group not receiving the materials. Additional modules could be fruitfully developed and offered.

Electronic Cigarette Refill Liquids: Child-Resistant Packaging, Nicotine Content, and Sales to Minors2

PubMed Central

Buettner-Schmidt, Kelly; Miller, Donald R.; Balasubramanian, Narayanaganesh

2016-01-01

Purpose To determine the accuracy of the labeled quantity of the nicotine content of the e-liquids sold in unlicensed vape stores, whether the packaging of e-liquids sold within the vape stores was child-resistant, whether minors were present within vape stores, and whether sales to minors occurred. This study was conducted across North Dakota prior to implementation of a new e-cigarette state law and provided a baseline assessment before enactment of the new legal requirements. Design and Methods We tested samples of e-liquids and performed observations in 16 stores that were selling e-cigarettes but were not legally required to be licensed for tobacco retail. The e-liquids were analyzed for nicotine content using a validated high-performance liquid chromatography method for nicotine analysis. Results Of the 70 collected e-liquid samples that claimed to contain nicotine, 17% contained more than the labeled quantity and 34% contained less than the labeled quantity by 10% or more, with one sample containing 172% more than the labeled quantity. Of the 94 e-liquid containers sampled, only 35% were determined to be child-resistant. Minors were present in stores, although no sales to minors occurred. Conclusions Mislabeling of nicotine in e-liquids is common and exposes the user to the harmful effects of nicotine. The lack of child-resistant packaging for this potentially toxic substance is a serious public health problem. E-cigarettes should be included in the legal definition of tobacco products, child-resistant packaging and nicotine labeling laws should be enacted and strictly enforced, and vape stores should be licensed by states. PMID:27079973

“One for all and all for one”: consensus-building within communities in rural India on their health microinsurance package

PubMed Central

Dror, David M; Panda, Pradeep; May, Christina; Majumdar, Atanu; Koren, Ruth

2014-01-01

Introduction This study deals with consensus by poor persons in the informal sector in rural India on the benefit-package of their community-based health insurance (CBHI). In this article we describe the process of involving rural poor in benefit-package design and assess the underlying reasons for choices they made and their ability to reach group consensus. Methods The benefit-package selection process entailed four steps: narrowing down the options by community representatives, plus three Choosing Healthplans All Together (CHAT) rounds conducted among female members of self-help groups. We use mixed-methods and four sources of data: baseline study, CHAT exercises, in-depth interviews, and evaluation questionnaires. We define consensus as a community resolution reached by discussion, considering all opinions, and to which everyone agrees. We use the coefficient of unalikeability to express consensus quantitatively (as variability of categorical variables) rather than just categorically (as a binomial Yes/No). Findings The coefficient of unalikeability decreased consistently over consecutive CHAT rounds, reaching zero (ie, 100% consensus) in two locations, and confirmed gradual adoption of consensus. Evaluation interviews revealed that the wish to be part of a consensus was dominant in all locations. The in-depth interviews indicated that people enjoyed the participatory deliberations, were satisfied with the selection, and that group decisions reflected a consensus rather than majority. Moreover, evidence suggests that pre-selectors and communities aimed to enhance the likelihood that many households would benefit from CBHI. Conclusion The voluntary and contributory CBHI relies on an engaging experience with others to validate perceived priorities of the target group. The strongest motive for choice was the wish to join a consensus (more than price or package-composition) and the intention that many members should benefit. The degree of consensus improved with iterative CHAT rounds. Harnessing group consensus requires catalytic intervention, as the process is not spontaneous. PMID:25120378

Preliminary design package for Sunair SEC-601 solar collector

NASA Technical Reports Server (NTRS)

1978-01-01

The preliminary design of the Owens-Illinois model Sunair SEC-601 tubular air solar collector is presented. Information in this package includes the subsystem design and development approaches, hazard analysis, and detailed drawings available as the preliminary design review.

An Investigation Into The Viability Of Nanocrystalline Cellulose As A Packaging Material

NASA Astrophysics Data System (ADS)

Glass, John

The focus of this proposal is to identify unexplored areas of research in the field of packaging science, specifically related to the incorporation of Nanocrystalline Cellulose (NCC) as a functional material in fiber based packaging, as well as to highlight some of potential risks and unknowns in the product lifecycle. This research hypothesizes that incorporating NCC into wood fiber-based c-flute corrugated packaging medium will show a sufficient performance improvement to justify additional research. Nanomaterials, as a whole, are still being understood, including those using naturally occurring bases such as NCC. Further incremental testing with NCC will help provide a performance and safety baseline for the necessary future research prior to mass production. NCC holds great promise for the future: a commonly available, naturally occurring material that's easily recyclable and biodegradable, yet has the strength of steel. Due diligence is required for this material to come to market in a safe and sustainable manner.

A microelectronics approach for the ROSETTA surface science package

NASA Technical Reports Server (NTRS)

Sandau, Rainer (Editor); Alkalaj, Leon

1996-01-01

In relation to the Rosetta surface science package, the benefits of the application of advanced microelectronics packaging technologies and other output from the Mars environmental survey (MESUR) integrated microelectronics study are reported on. The surface science package will be designed to operate for tens of hours. Its limited mass and power consumption make necessary a highly integrated design with all the instruments and subunits operated from a centralized control and information management subsystem.

USING A CONTAINMENT VESSEL LIFTING APPARATUS FOR REMOTE OPERATIONS OF SHIPPING PACKAGES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loftin, Bradley; Koenig, Richard

2013-08-08

The 9977 and the 9975 shipping packages are used in various nuclear facilities within the Department of Energy. These shipping packages are often loaded in designated areas with designs using overhead cranes or A-frames with lifting winches. However, there are cases where loading operations must be performed in remote locations where these facility infrastructures do not exist. For these locations, a lifting apparatus has been designed to lift the containment vessels partially out of the package for unloading operations to take place. Additionally, the apparatus allows for loading and closure of the containment vessel and subsequent pre-shipment testing. This papermore » will address the design of the apparatus and the challenges associated with the design, and it will describe the use of the apparatus.« less

16 CFR § 1700.3 - Establishment of standards for special packaging.

Code of Federal Regulations, 2013 CFR

2013-01-01

... such standard; (2) Available scientific, medical, and engineering data concerning special packaging and... such standards, the Commission shall not prescribe specific packaging designs, product content, package... such substance in a package which the Commission determines is unnecessarily attractive to children. (e...

DESIGN ANALYSIS FOR THE DEFENSE HIGH-LEVEL WASTE DISPOSAL CONTAINER

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. Radulesscu; J.S. Tang

The purpose of ''Design Analysis for the Defense High-Level Waste Disposal Container'' analysis is to technically define the defense high-level waste (DHLW) disposal container/waste package using the Waste Package Department's (WPD) design methods, as documented in ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000a). The DHLW disposal container is intended for disposal of commercial high-level waste (HLW) and DHLW (including immobilized plutonium waste forms), placed within disposable canisters. The U.S. Department of Energy (DOE)-managed spent nuclear fuel (SNF) in disposable canisters may also be placed in a DHLW disposal container alongmore » with HLW forms. The objective of this analysis is to demonstrate that the DHLW disposal container/waste package satisfies the project requirements, as embodied in Defense High Level Waste Disposal Container System Description Document (SDD) (CRWMS M&O 1999a), and additional criteria, as identified in Waste Package Design Sensitivity Report (CRWMS M&Q 2000b, Table 4). The analysis briefly describes the analytical methods appropriate for the design of the DHLW disposal contained waste package, and summarizes the results of the calculations that illustrate the analytical methods. However, the analysis is limited to the calculations selected for the DHLW disposal container in support of the Site Recommendation (SR) (CRWMS M&O 2000b, Section 7). The scope of this analysis is restricted to the design of the codisposal waste package of the Savannah River Site (SRS) DHLW glass canisters and the Training, Research, Isotopes General Atomics (TRIGA) SNF loaded in a short 18-in.-outer diameter (OD) DOE standardized SNF canister. This waste package is representative of the waste packages that consist of the DHLW disposal container, the DHLW/HLW glass canisters, and the DOE-managed SNF in disposable canisters. The intended use of this analysis is to support Site Recommendation reports and to assist in the development of WPD drawings. Activities described in this analysis were conducted in accordance with the Development Plan ''Design Analysis for the Defense High-Level Waste Disposal Container'' (CRWMS M&O 2000c) with no deviations from the plan.« less

Packaging Strategies for Criticality Safety for "Other" DOE Fuels in a Repository

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larry L Taylor

2004-06-01

Since 1998, there has been an ongoing effort to gain acceptance of U.S. Department of Energy (DOE)-owned spent nuclear fuel (SNF) in the national repository. To accomplish this goal, the fuel matrix was used as a discriminating feature to segregate fuels into nine distinct groups. From each of those groups, a characteristic fuel was selected and analyzed for criticality safety based on a proposed packaging strategy. This report identifies and quantifies the important criticality parameters for the canisterized fuels within each criticality group to: (1) demonstrate how the “other” fuels in the group are bounded by the baseline calculations ormore » (2) allow identification of individual type fuels that might require special analysis and packaging.« less

Evaluation of the effectiveness and efficiency of two stimulus prompt strategies with severely handicapped students.

PubMed Central

Steege, M W; Wacker, D P; McMahon, C M

1987-01-01

In this study we compared the effectiveness and efficiency of two treatment packages that used stimulus prompt sequences and task analyses for teaching community living skills to severely handicapped students. Four severely and multiply handicapped students were trained to perform four tasks: (a) making toast, (b) making popcorn, (c) operating a clothes dryer, and (d) operating a washing machine. Following baseline, each student was exposed to two types of training procedures, each involving a task analysis of the target behavior. Training Procedure 1 (Traditional) utilized a least-to-most restrictive prompt sequence. Training Procedure 2 (Prescriptive) utilized ongoing behavioral assessment data to identify discriminative stimuli. The assessment data were used to prescribe instructional prompts across successive training trials. Performance on the tasks was evaluated within a combination multiple baseline (across subjects) and probe (across tasks) design. Training conditions were counterbalanced across subjects and tasks. Results indicated that both training procedures were equally effective in increasing independent task acquisition for subjects on all tasks; however, the prescriptive procedure was the more efficient procedure. PMID:3667479

Rover Low Gain Antenna Qualification for Deep Space Thermal Environments

NASA Technical Reports Server (NTRS)

Ramesham, Rajeshuni; Amaro, Luis R.; Brown, Paula R.; Usiskin, Robert; Prater, Jack L.

2013-01-01

A method to qualify the Rover Low Gain Antenna (RLGA) for use during the Mars Science Laboratory (MSL) mission has been devised. The RLGA antenna must survive all ground operations, plus the nominal 670 Martian sol mission that includes the summer and winter seasons of the Mars thermal environment. This qualification effort was performed to verify that the RLGA design, its bonding, and packaging processes are adequate. The qualification test was designed to demonstrate a survival life of three times more than all expected ground testing, plus a nominal 670 Martian sol missions. Baseline RF tests and a visual inspection were performed on the RLGA hardware before the start of the qualification test. Functional intermittent RF tests were performed during thermal chamber breaks over the course of the complete qualification test. For the return loss measurements, the RLGA antenna was moved to a test area. A vector network analyzer was calibrated over the operational frequency range of the antenna. For the RLGA, a simple return loss measurement was performed. A total of 2,010 (3 670 or 3 times mission thermal cycles) thermal cycles was performed. Visual inspection of the RLGA hardware did not show any anomalies due to the thermal cycling. The return loss measurement results of the RLGA antenna after the PQV (Package Qualification and Verification) test did not show any anomalies. The antenna pattern data taken before and after the PQV test at the uplink and downlink frequencies were unchanged. Therefore, the developed design of RLGA is qualified for a long-duration MSL mission.

Promoting father involvement in early home visiting services for vulnerable families: Findings from a pilot study of "Dads matter".

PubMed

Guterman, Neil B; Bellamy, Jennifer L; Banman, Aaron

2018-02-01

Despite mounting evidence on the importance of fathers in children's development, evidence-based perinatal home visitation programs have largely overlooked fathers in the design and delivery of services. This paper describes the design, development, and pilot testing of the "Dads Matter" enhancement to standard home visiting services. Dads Matter is a manualized intervention package designed to fully incorporate fathers into perinatal home visiting services. Twenty-four families were enrolled in a pilot study to assess the feasibility, acceptability, and preliminary outcomes of the intervention. Using a quasi-experimental time-lagged design, 12 families received standard home visiting services and completed baseline and four-month post-tests. Home visitor staff were then trained and supervised to implement the Dads Matter enhancement in addition to standard services. Twelve additional families were then enrolled and completed baseline and four-month post-tests. Implementation data indicated that Dads Matter was implemented as planned. Cohen's d scores on outcome measures indicate positive trends associated with Dads Matter in the quality of the mother-father relationship, perceived stress reported by both parents, fathers' involvement with the child, maltreatment indicators, and fathers' verbalizations toward the infant. Effect sizes generally ranged from moderate to large in magnitude and were larger than overall effect sizes of home visitation services alone reported in prior meta-analyses. Dads Matter appears to be a feasible, acceptable, and promising approach to improving fathers' engagement in home visiting services and promoting family and child well-being. Copyright © 2017. Published by Elsevier Ltd.

Design Approaches and Comparison of TAPS Packages for Engineering

ERIC Educational Resources Information Center

Sidhu, S. Manjit

2007-01-01

Purpose: The paper's purpose is to promote the use of modern technologies such as multimedia packages to engineering students. The aim is to help them to learning in their learning, visualization, problem solving and understanding engineering concepts such as in mechanics dynamics. Design/methodology/approach: TAPS packages are developed to help…

75 FR 5375 - Hazardous Material; Miscellaneous Packaging Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-02

...In this final rule, PHMSA is amending packaging requirements in the Hazardous Materials Regulations to enhance compliance flexibility, improve clarity, and reduce regulatory burdens. Specifically, we are revising several packaging related definitions; adding provisions to allow more flexibility when preparing and transmitting closure instructions, including conditions under which closure instructions may be transmitted electronically; adding a requirement for shippers to retain packaging closure instructions; incorporating new language that will allow for a practicable means of stenciling the ``UN'' symbol on packagings; and clarifying a requirement to document the methodology used when determining whether a change in packaging configuration requires retesting as a new design or may be considered a variation of a previously tested design. This final rule also incorporates requirements for construction, maintenance, and use of Large Packagings.

Real time flight simulation methodology

NASA Technical Reports Server (NTRS)

Parrish, E. A.; Cook, G.; Mcvey, E. S.

1977-01-01

Substitutional methods for digitization, input signal-dependent integrator approximations, and digital autopilot design were developed. The software framework of a simulator design package is described. Included are subroutines for iterative designs of simulation models and a rudimentary graphics package.

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1973-01-01

A fuel cell technology program was established to advance the state-of-the-art of hydrogen-oxygen fuel cells using low temperature, potassium hydroxide electrolyte technology as the base. Program tasks are described consisting of baseline cell design and stack testing, hydrogen pump design and testing, and DM-2 powerplant testing and technology extension efforts. A baseline cell configuration capable of a minimum of 2000 hours of life was defined. A 6-cell prototype stack, incorporating most of the scheme cell features, was tested for a total of 10,497 hours. A 6-cell stack incorporating all of the design features was tested. The DM-2 powerplant with a 34 cell stack, an accessory section packaged in the basic configuration anticipated for the space shuttle powerplant and a powerplant control unit, was defined, assembled, and tested. Cells were used in the stack and a drag-type hydrogen pump was installed in the accessory section. A test program was established, in conjunction with NASA/JSC, based on space shuttle orbiter mission. A 2000-hour minimum endurance test and a 5000-hour goal were set and the test started on August 8, 1972. The 2000-hour milestone was completed on November 3, 1972. On 13 March 1973, at the end of the thirty-first simulated seven-day mission and 5072 load hours, the test was concluded, all goals having been met. At this time, the DM-2 was in excellent condition and capable of additional endurance.

IEEE WMED 2016 Homepage

Science.gov Websites

characterization, design, and new device technologies. This workshop will consist of invited talks, contributed and Reliability Semiconductor package reliability, Design for Manufacturability, Stacked die packaging and Novel assembly processes Microelectronic Circuit Design New product design, high-speed and/or low

Design and analysis study of a spacecraft optical transceiver package

NASA Technical Reports Server (NTRS)

Lambert, S. G.

1985-01-01

A detailed system level design of an Optical Transceiver Package (OPTRANSPAC) for a deep space vehicle whose mission is outer planet exploration is developed. In addition to the terminal design, this study provides estimates of the dynamic environments to be encountered by the transceiver throughout its mission life. Optical communication link analysis, optical thin lens design, electronic functional design and mechanical layout and packaging are employed in the terminal design. Results of the study describe an Optical Transceiver Package capable of communicating to an Earth Orbiting Relay Station at a distance of 10 Astronomical Units (AU) and data rates up to 100 KBPS. The transceiver is also capable of receiving 1 KBPS of command data from the Earth Relay. The physical dimensions of the terminal are contained within a 3.5' x 1.5' x 2.0' envelope and the transceiver weight and power are estimated at 52.2 Kg (115 pounds) and 57 watts, respectively.

Wide-field Imaging System and Rapid Direction of Optical Zoom (WOZ)

DTIC Science & Technology

2010-09-25

commercial software packages: SolidWorks, COMSOL Multiphysics, and ZEMAX optical design. SolidWorks is a computer aided design package, which as a live...interface to COMSOL. COMSOL is a finite element analysis/partial differential equation solver. ZEMAX is an optical design package. Both COMSOL and... ZEMAX have live interfaces to MatLab. Our initial investigations have enabled a model in SolidWorks to be updated in COMSOL, an FEA calculation

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 60.135 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES... for the waste package and its components. (a) High-level-waste package design in general. (1) Packages... package's permanent written records. (c) Waste form criteria for HLW. High-level radioactive waste that is...

21 CFR 820.130 - Device packaging.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Device packaging. 820.130 Section 820.130 Food and... QUALITY SYSTEM REGULATION Labeling and Packaging Control § 820.130 Device packaging. Each manufacturer shall ensure that device packaging and shipping containers are designed and constructed to protect the...

Edible packaging materials.

PubMed

Janjarasskul, Theeranun; Krochta, John M

2010-01-01

Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

Study for application of a sounding rocket experiment to spacelab/shuttle mission

NASA Technical Reports Server (NTRS)

Code, A. D.

1975-01-01

An inexpensive adaptation of rocket-size packages to Spacelab/Shuttle use was studied. A two-flight project extending over two years was baselined, requiring 80 man-months of effort. It was concluded that testing should be held to a minimum since rocket packages seem to be able to tolerate shuttle vibration and noise levels. A standard, flexible control and data collection language such as FORTH should be used rather than a computation language such as FORTRAN in order to hold programming costs to a minimum.

PepsNMR for 1H NMR metabolomic data pre-processing.

PubMed

Martin, Manon; Legat, Benoît; Leenders, Justine; Vanwinsberghe, Julien; Rousseau, Réjane; Boulanger, Bruno; Eilers, Paul H C; De Tullio, Pascal; Govaerts, Bernadette

2018-08-17

In the analysis of biological samples, control over experimental design and data acquisition procedures alone cannot ensure well-conditioned 1 H NMR spectra with maximal information recovery for data analysis. A third major element affects the accuracy and robustness of results: the data pre-processing/pre-treatment for which not enough attention is usually devoted, in particular in metabolomic studies. The usual approach is to use proprietary software provided by the analytical instruments' manufacturers to conduct the entire pre-processing strategy. This widespread practice has a number of advantages such as a user-friendly interface with graphical facilities, but it involves non-negligible drawbacks: a lack of methodological information and automation, a dependency of subjective human choices, only standard processing possibilities and an absence of objective quality criteria to evaluate pre-processing quality. This paper introduces PepsNMR to meet these needs, an R package dedicated to the whole processing chain prior to multivariate data analysis, including, among other tools, solvent signal suppression, internal calibration, phase, baseline and misalignment corrections, bucketing and normalisation. Methodological aspects are discussed and the package is compared to the gold standard procedure with two metabolomic case studies. The use of PepsNMR on these data shows better information recovery and predictive power based on objective and quantitative quality criteria. Other key assets of the package are workflow processing speed, reproducibility, reporting and flexibility, graphical outputs and documented routines. Copyright © 2018 Elsevier B.V. All rights reserved.

Package Design Affects Accuracy Recognition for Medications.

PubMed

Endestad, Tor; Wortinger, Laura A; Madsen, Steinar; Hortemo, Sigurd

2016-12-01

Our aim was to test if highlighting and placement of substance name on medication package have the potential to reduce patient errors. An unintentional overdose of medication is a large health issue that might be linked to medication package design. In two experiments, placement, background color, and the active ingredient of generic medication packages were manipulated according to best human factors guidelines to reduce causes of labeling-related patient errors. In two experiments, we compared the original packaging with packages where we varied placement of the name, dose, and background of the active ingredient. Age-relevant differences and the effect of color on medication recognition error were tested. In Experiment 1, 59 volunteers (30 elderly and 29 young students), participated. In Experiment 2, 25 volunteers participated. The most common error was the inability to identify that two different packages contained the same active ingredient (young, 41%, and elderly, 68%). This kind of error decreased with the redesigned packages (young, 8%, and elderly, 16%). Confusion errors related to color design were reduced by two thirds in the redesigned packages compared with original generic medications. Prominent placement of substance name and dose with a band of high-contrast color support recognition of the active substance in medications. A simple modification including highlighting and placing the name of the active ingredient in the upper right-hand corner of the package helps users realize that two different packages can contain the same active substance, thus reducing the risk of inadvertent medication overdose. © 2016, Human Factors and Ergonomics Society.

Package Design Affects Accuracy Recognition for Medications

PubMed Central

Endestad, Tor; Wortinger, Laura A.; Madsen, Steinar; Hortemo, Sigurd

2016-01-01

Objective: Our aim was to test if highlighting and placement of substance name on medication package have the potential to reduce patient errors. Background: An unintentional overdose of medication is a large health issue that might be linked to medication package design. In two experiments, placement, background color, and the active ingredient of generic medication packages were manipulated according to best human factors guidelines to reduce causes of labeling-related patient errors. Method: In two experiments, we compared the original packaging with packages where we varied placement of the name, dose, and background of the active ingredient. Age-relevant differences and the effect of color on medication recognition error were tested. In Experiment 1, 59 volunteers (30 elderly and 29 young students), participated. In Experiment 2, 25 volunteers participated. Results: The most common error was the inability to identify that two different packages contained the same active ingredient (young, 41%, and elderly, 68%). This kind of error decreased with the redesigned packages (young, 8%, and elderly, 16%). Confusion errors related to color design were reduced by two thirds in the redesigned packages compared with original generic medications. Conclusion: Prominent placement of substance name and dose with a band of high-contrast color support recognition of the active substance in medications. Application: A simple modification including highlighting and placing the name of the active ingredient in the upper right-hand corner of the package helps users realize that two different packages can contain the same active substance, thus reducing the risk of inadvertent medication overdose. PMID:27591209

Cognitive Foundry v. 3.0 (OSS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basilico, Justin; Dixon, Kevin; McClain, Jonathan

2009-11-18

The Cognitive Foundry is a unified collection of tools designed for research and applications that use cognitive modeling, machine learning, or pattern recognition. The software library contains design patterns, interface definitions, and default implementations of reusable software components and algorithms designed to support a wide variety of research and development needs. The library contains three main software packages: the Common package that contains basic utilities and linear algebraic methods, the Cognitive Framework package that contains tools to assist in implementing and analyzing theories of cognition, and the Machine Learning package that provides general algorithms and methods for populating Cognitive Frameworkmore » components from domain-relevant data.« less

78 FR 79710 - New Postal Product

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

... Functionally Equivalent Global Expedited Package Services 3 Negotiated Service Agreement and Application for Non-Public Treatment of Materials Filed Under Seal, December 23, 2013 (Notice). II. Background The.... CP2010-71 to serve as the baseline agreement for comparison of potentially functionally equivalent...

Field Demonstration of a High-Efficiency Packaged Rooftop Air Conditioning Unit at Fort Gordon, Augusta, GA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, Peter R.; Sullivan, Gregory P.; Parker, Graham B.

2006-03-31

As part of a larger program targeting the market transformation of packaged rooftop air conditioning, five high-efficiency rooftop air conditioning products were selected in 2002 by the U.S. Department of Energy (DOE) under the Unitary Air Conditioner (UAC) Technology Procurement (http://www.pnl.gov/uac). In February 2003, Fort Gordon in Augusta, Georgia was chosen as the demonstration site. With the goal of validating the field performance and operation of one of the awarded products, a 10-ton high-efficiency packaged rooftop unit (RTU) manufactured by Global Energy Group (GEG) was installed at Fort Gordon in October 2003. Following equipment installation, power metering, air- and refrigerant-sidemore » instrumentation was installed on the GEG RTU and a 4-year old typical-efficiency 20-ton RTU manufactured by AAON . The GEG and AAON units were instrumented identically and operated May through July, 2005, to observe performance under a range of conditions. Based on the data collected as part of this demonstration, the GEG equipment performed at least 8% better in stage-1 (single compressor running) cooling and at least 16% better in stage-2 (both compressors running) than the baseline AAON equipment. Performance comparisons are based on what we call application EER normalized to equivalent specific fan power. The full-load, specific-fan-power-normalized application EERs at ARI design conditions were 10.48 Btu/Wh for the GEG and 9.00 Btu/Wh for the baseline machine. With a cost premium of nearly 50%, and slightly higher maintenance costs, the life-cycle cost analysis shows that the GEG technology pays for itself--a positive net-present value (NPV)--only in climates and buildings with long cooling seasons. Manufacture of this equipment on a larger scale can be expected to reduce costs to the point where it is more broadly cost-effective. The assumed 10-ton baseline and new-technology unit costs are $3824.00 and $5525.00 respectively. If the new technology cost is assumed to drop as sales increase to $4674.50 for a 10-ton unit (i.e. the original cost difference is halved), the life-cycle costs improve. A grid of first cost, annual maintenance cost and electricity price is enumerated and the results presented in the report show the sensitivity of life cycle cost to these three financial parameters in each of eight different climates.« less

NASA's Advanced Exploration Systems Mars Transit Habitat Refinement Point of Departure Design

NASA Technical Reports Server (NTRS)

Simon, Matthew; Latorella, Kara; Martin, John; Cerro, Jeff; Lepsch, Roger; Jefferies, Sharon; Goodliff, Kandyce; McCleskey, Carey; Smitherman, David; Stromgren, Chel

2017-01-01

This paper describes the recently developed point of departure design for a long duration, reusable Mars Transit Habitat, which was established during a 2016 NASA habitat design refinement activity supporting the definition of NASA's Evolvable Mars Campaign. As part of its development of sustainable human Mars mission concepts achievable in the 2030s, the Evolvable Mars Campaign has identified desired durations and mass/dimensional limits for long duration Mars habitat designs to enable the currently assumed solar electric and chemical transportation architectures. The Advanced Exploration Systems Mars Transit Habitat Refinement Activity brought together habitat subsystem design expertise from across NASA to develop an increased fidelity, consensus design for a transit habitat within these constraints. The resulting design and data (including a mass equipment list) contained in this paper are intended to help teams across the agency and potential commercial, academic, or international partners understand: 1) the current architecture/habitat guidelines and assumptions, 2) performance targets of such a habitat (particularly in mass, volume, and power), 3) the driving technology/capability developments and architectural solutions which are necessary for achieving these targets, and 4) mass reduction opportunities and research/design needs to inform the development of future research and proposals. Data presented includes: an overview of the habitat refinement activity including motivation and process when informative; full documentation of the baseline design guidelines and assumptions; detailed mass and volume breakdowns; a moderately detailed concept of operations; a preliminary interior layout design with rationale; a list of the required capabilities necessary to enable the desired mass; and identification of any worthwhile trades/analyses which could inform future habitat design efforts. As a whole, the data in the paper show that a transit habitat meeting the 43 metric tons launch mass/trans-Mars injection burn limits specified by the Evolvable Mars Campaign is achievable near the desired timeframe with moderate strategic investments including maintainable life support systems, repurposable structures and packaging, and lightweight exercise modalities. It also identifies operational and technological options to reduce this mass to less than 41 metric tons including staging of launch structure/packaging and alternate structural materials.

General-Purpose Ada Software Packages

NASA Technical Reports Server (NTRS)

Klumpp, Allan R.

1991-01-01

Collection of subprograms brings to Ada many features from other programming languages. All generic packages designed to be easily instantiated for types declared in user's facility. Most packages have widespread applicability, although some oriented for avionics applications. All designed to facilitate writing new software in Ada. Written on IBM/AT personal computer running under PC DOS, v.3.1.

Assessment and model guided cancer screening promotion by village doctors in China: a randomized controlled trial protocol.

PubMed

Feng, Rui; Shen, Xingrong; Chai, Jing; Chen, Penglai; Cheng, Jing; Liang, Han; Zhao, Ting; Sha, Rui; Li, Kaichun; Wang, Debin

2015-10-12

Proven cost-effectiveness contrasted by low uptake of cancer screening (CS) calls for new methodologies promoting the service. Contemporary interventions in this regard relies primarily on strategies targeting general or specific groups with limited attention being paid to individualized approaches. This trial tests a novel package promoting CS utilization via continuous and tailored counseling delivered by primary caregivers. It aims at demonstrating that high risk individuals in the intervention arm will, compared to those in the delayed intervention condition, show increased use of CS service. The trial adopts a quasi-randomized controlled trial design and involves 2160 high risk individuals selected, via rapid and detailed risk assessments, from about 72,000 farmers aged 35+ in 36 administrative villages randomized into equal intervention and delayed intervention arms. The CS intervention package uses: a) village doctors and village clinics to deliver personalized and thus relatively sophisticated CS counseling; b) two-stage risk assessment models in identifying high risk individuals to focus the intervention on the most needed; c) standardized operation procedures to guide conduct of counseling; d) real-time effectiveness and quality monitoring to leverage continuous improvement; e) web-based electronic system to enable prioritizing complex determinants of CS uptake and tailoring counseling sessions to the changing needs of individual farmers. The intervention arm receives baseline and semiannual follow up evaluations plus CS counseling for 5 years; while the delayed intervention arm, only the same baseline and follow-up evaluations for the first 5 years and CS counseling starting from the 6th year if the intervention proved effective. Evaluation measures include: CS uptake by high risk farmers and changes in their knowledge, perceptions and self-efficacy about CS. Given the complexity and heterogeneity in the determinant system of individual CS service seeking behavior, personalized interventions may prove to be an effective strategy. The current trial distinguishes itself from previous ones in that it not only adopts a personalized strategy but also introduces a package of pragmatic solutions based on proven theories for tackling potential barriers and incorporating key success factors in a synergetic way toward low cost, effective and sustainable CS promotion. ISRCTN33269053.

Practical Thermal Evaluation Methods For HAC Fire Analysis In Type B Radiaoactive Material (RAM) Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramczyk, Glenn; Hensel, Stephen J; Gupta, Narendra K.

Title 10 of the United States Code of Federal Regulations Part 71 for the Nuclear Regulatory Commission (10 CFR Part 71.73) requires that Type B radioactive material (RAM) packages satisfy certain Hypothetical Accident Conditions (HAC) thermal design requirements to ensure package safety during accidental fire conditions. Compliance with thermal design requirements can be met by prototype tests, analyses only or a combination of tests and analyses. Normally, it is impractical to meet all the HAC using tests only and the analytical methods are too complex due to the multi-physics non-linear nature of the fire event. Therefore, a combination of testsmore » and thermal analyses methods using commercial heat transfer software are used to meet the necessary design requirements. The authors, along with his other colleagues at Savannah River National Laboratory in Aiken, SC, USA, have successfully used this 'tests and analyses' approach in the design and certification of several United States' DOE/NNSA certified packages, e.g. 9975, 9977, 9978, 9979, H1700, and Bulk Tritium Shipping Package (BTSP). This paper will describe these methods and it is hoped that the RAM Type B package designers and analysts can use them for their applications.« less

49 CFR 178.935 - Standards for wooden Large Packagings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Packagings. (i) Natural wood used in the construction of Large Packagings must be well-seasoned, commercially...) Reconstituted wood used in the construction of Large Packagings must be water resistant reconstituted wood such... Packaging types are designated: (1) 50C natural wood. (2) 50D plywood. (3) 50F reconstituted wood. (b...

Monte Carlo Simulations for VLBI2010

NASA Astrophysics Data System (ADS)

Wresnik, J.; Böhm, J.; Schuh, H.

2007-07-01

Monte Carlo simulations are carried out at the Institute of Geodesy and Geophysics (IGG), Vienna, and at Goddard Space Flight Center (GSFC), Greenbelt (USA), with the goal to design a new geodetic Very Long Baseline Interferometry (VLBI) system. Influences of the schedule, the network geometry and the main stochastic processes on the geodetic results are investigated. Therefore schedules are prepared with the software package SKED (Vandenberg 1999), and different strategies are applied to produce temporally very dense schedules which are compared in terms of baseline length repeatabilities. For the simulation of VLBI observations a Monte Carlo Simulator was set up which creates artificial observations by randomly simulating wet zenith delay and clock values as well as additive white noise representing the antenna errors. For the simulation at IGG the VLBI analysis software OCCAM (Titov et al. 2004) was adapted. Random walk processes with power spectrum densities of 0.7 and 0.1 psec2/sec are used for the simulation of wet zenith delays. The clocks are simulated with Allan Standard Deviations of 1*10^-14 @ 50 min and 2*10^-15 @ 15 min and three levels of white noise, 4 psec, 8 psec and, 16 psec, are added to the artificial observations. The variations of the power spectrum densities of the clocks and wet zenith delays, and the application of different white noise levels show clearly that the wet delay is the critical factor for the improvement of the geodetic VLBI system. At GSFC the software CalcSolve is used for the VLBI analysis, therefore a comparison between the software packages OCCAM and CalcSolve was done with simulated data. For further simulations the wet zenith delay was modeled by a turbulence model. This data was provided by Nilsson T. and was added to the simulation work. Different schedules have been run.

Decreasing handoff-related care failures in children's hospitals.

PubMed

Bigham, Michael T; Logsdon, Tina R; Manicone, Paul E; Landrigan, Christopher P; Hayes, Leslie W; Randall, Kelly H; Grover, Purva; Collins, Susan B; Ramirez, Dana E; O'Guin, Crystal D; Williams, Catherine I; Warnick, Robin J; Sharek, Paul J

2014-08-01

Patient handoffs in health care require transfer of information, responsibility, and authority between providers. Suboptimal patient handoffs pose a serious safety risk. Studies demonstrating the impact of improved patient handoffs on care failures are lacking. The primary objective of this study was to evaluate the effect of a multihospital collaborative designed to decrease handoff-related care failures. Twenty-three children's hospitals participated in a quality improvement collaborative aimed at reducing handoff-related care failures. The improvement was guided by evidence-based recommendations regarding handoff intent and content, standardized handoff tools/methods, and clear transition of responsibility. Hospitals tailored handoff elements to locally important handoff types. Handoff-related care failures were compared between baseline and 3 intervention periods. Secondary outcomes measured compliance to specific change package elements and balancing measure of staff satisfaction. Twenty-three children's hospitals evaluated 7864 handoffs over the 12-month study period. Handoff-related care failures decreased from baseline (25.8%) to the final intervention period (7.9%) (P < .05). Significant improvement was observed in every handoff type studied. Compliance to change package elements improved (achieving a common understanding about the patient from 86% to 96% [P < .05]; clear transition of responsibility from 92% to 96% [P < .05]; and minimized interruptions and distractions from 84% to 90% [P < .05]) as did overall satisfaction with the handoff (from 55% to 70% [P < .05]). Implementation of a standardized evidence-based handoff process across 23 children's hospitals resulted in a significant decrease in handoff-related care failures, observed over all handoff types. Compliance to critical components of the handoff process improved, as did provider satisfaction. Copyright © 2014 by the American Academy of Pediatrics.

Package Up Your Troubles--An Introduction to Package Libraries

ERIC Educational Resources Information Center

Frank, Colin

1978-01-01

Discusses a "package deal" library--a prefabricated building including interior furnishing--in terms of costs, fitness for purpose, and interior design, i.e., shelving, flooring, heating, lighting, and humidity. Advantages and disadvantages of the package library are also considered. (Author/MBR)

An Interactive Computer Aided Design and Analysis Package.

DTIC Science & Technology

1986-03-01

Al-A167 114 AN INTERACTIVE COMPUTER AIDED DESIGN MUD ANAILYSIS 1/𔃼 PACKAGE(U) NAVAL POSTGRADUATE SCHOOL NONTEREY CA T L EUALD "AR 86 UNCLSSIFIED F... SCHOOL Monterey, California DTIC .LECTE MAYOS THESIS AN INTERACTIVE COMPUTER AIDED DESIGN AND ANALYSIS PACKAGE by Terrence L. Ewald March 1986 jThesis...ORGANIZATION Naval Postgraduate School (if dAp90h81111) Naval Postgraduate School . 62A 6C. ADDRESS (0ty. State, and ZIP Code) 7b. ADDRESS (City State. and

Application of GA package in functional packaging

NASA Astrophysics Data System (ADS)

Belousova, D. A.; Noskova, E. E.; Kapulin, D. V.

2018-05-01

The approach to application program for the task of configuration of the elements of the commutation circuit for design of the radio-electronic equipment on the basis of the genetic algorithm is offered. The efficiency of the used approach for commutation circuits with different characteristics for computer-aided design on radio-electronic manufacturing is shown. The prototype of the computer-aided design subsystem on the basis of a package GA for R with a set of the general functions for optimization of multivariate models is programmed.

Think INSIDE the Box: Package Engineering

ERIC Educational Resources Information Center

Snyder, Mark; Painter, Donna

2014-01-01

Most products people purchase, keep in their homes, and often discard, are typically packaged in some way. Packaging is so prevalent in daily lives that many of take it for granted. That is by design-the expectation of good packaging is that it exists for the sake of the product. The primary purposes of any package (to contain, inform, display,…

Detailed design package for design of a video system providing optimal visual information for controlling payload and experiment operations with television

NASA Technical Reports Server (NTRS)

1975-01-01

A detailed description of a video system for controlling space shuttle payloads and experiments is presented in the preliminary design review and critical design review, first and second engineering design reports respectively, and in the final report submitted jointly with the design package. The material contained in the four subsequent sections of the package contains system descriptions, design data, and specifications for the recommended 2-view system. Section 2 contains diagrams relating to the simulation test configuration of the 2-view system. Section 3 contains descriptions and drawings of the deliverable breadboard equipment. A description of the recommended system is contained in Section 4 with equipment specifications in Section 5.

Treatment of an assaultive, sensory-impaired adolescent through a multicomponent behavioral program.

PubMed

Luiselli, J K

1984-03-01

This project examined the effects of a multicomponent behavioral treatment program on assaultive behavior in a deaf, visually-impaired adolescent boy. Two types of assaultiveness were monitored: aggression towards adults and destruction of the physical environment. Intervention consisted of a token economy system, a response cost procedure, a "relaxation" technique, and skill training sessions. Through use of a multiple baseline across behaviors design, it was demonstrated that differentially reinforcing the absence of target behaviors on a weekly basis was the crucial ingredient in the treatment package. During a maintenance programming phase, the boy was gradually weaned off the token system. At 1- and 2-year follow-ups, no aggressive or destructive acts had occurred and the boy was showing improved communication and interpersonal skills.

GENERAL PURPOSE ADA PACKAGES

NASA Technical Reports Server (NTRS)

Klumpp, A. R.

1994-01-01

Ten families of subprograms are bundled together for the General-Purpose Ada Packages. The families bring to Ada many features from HAL/S, PL/I, FORTRAN, and other languages. These families are: string subprograms (INDEX, TRIM, LOAD, etc.); scalar subprograms (MAX, MIN, REM, etc.); array subprograms (MAX, MIN, PROD, SUM, GET, and PUT); numerical subprograms (EXP, CUBIC, etc.); service subprograms (DATE_TIME function, etc.); Linear Algebra II; Runge-Kutta integrators; and three text I/O families of packages. In two cases, a family consists of a single non-generic package. In all other cases, a family comprises a generic package and its instances for a selected group of scalar types. All generic packages are designed to be easily instantiated for the types declared in the user facility. The linear algebra package is LINRAG2. This package includes subprograms supplementing those in NPO-17985, An Ada Linear Algebra Package Modeled After HAL/S (LINRAG). Please note that LINRAG2 cannot be compiled without LINRAG. Most packages have widespread applicability, although some are oriented for avionics applications. All are designed to facilitate writing new software in Ada. Several of the packages use conventions introduced by other programming languages. A package of string subprograms is based on HAL/S (a language designed for the avionics software in the Space Shuttle) and PL/I. Packages of scalar and array subprograms are taken from HAL/S or generalized current Ada subprograms. A package of Runge-Kutta integrators is patterned after a built-in MAC (MIT Algebraic Compiler) integrator. Those packages modeled after HAL/S make it easy to translate existing HAL/S software to Ada. The General-Purpose Ada Packages program source code is available on two 360K 5.25" MS-DOS format diskettes. The software was developed using VAX Ada v1.5 under DEC VMS v4.5. It should be portable to any validated Ada compiler and it should execute either interactively or in batch. The largest package requires 205K of main memory on a DEC VAX running VMS. The software was developed in 1989, and is a copyrighted work with all copyright vested in NASA.

Evaluation of trade-offs in costs and environmental impacts for returnable packaging implementation

NASA Astrophysics Data System (ADS)

Jarupan, Lerpong; Kamarthi, Sagar V.; Gupta, Surendra M.

2004-02-01

The main thrust of returnable packaging these days is to provide logistical services through transportation and distribution of products and be environmentally friendly. Returnable packaging and reverse logistics concepts have converged to mitigate the adverse effect of packaging materials entering the solid waste stream. Returnable packaging must be designed by considering the trade-offs between costs and environmental impact to satisfy manufacturers and environmentalists alike. The cost of returnable packaging entails such items as materials, manufacturing, collection, storage and disposal. Environmental impacts are explicitly linked with solid waste, air pollution, and water pollution. This paper presents a multi-criteria evaluation technique to assist decision-makers for evaluating the trade-offs in costs and environmental impact during the returnable packaging design process. The proposed evaluation technique involves a combination of multiple objective integer linear programming and analytic hierarchy process. A numerical example is used to illustrate the methodology.

A comparison of InVivoStat with other statistical software packages for analysis of data generated from animal experiments.

PubMed

Clark, Robin A; Shoaib, Mohammed; Hewitt, Katherine N; Stanford, S Clare; Bate, Simon T

2012-08-01

InVivoStat is a free-to-use statistical software package for analysis of data generated from animal experiments. The package is designed specifically for researchers in the behavioural sciences, where exploiting the experimental design is crucial for reliable statistical analyses. This paper compares the analysis of three experiments conducted using InVivoStat with other widely used statistical packages: SPSS (V19), PRISM (V5), UniStat (V5.6) and Statistica (V9). We show that InVivoStat provides results that are similar to those from the other packages and, in some cases, are more advanced. This investigation provides evidence of further validation of InVivoStat and should strengthen users' confidence in this new software package.

21 CFR 211.130 - Packaging and labeling operations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging and Labeling Control § 211.130 Packaging and labeling operations. There shall be written procedures designed to... manufacture and control of the batch. (d) Examination of packaging and labeling materials for suitability and...

49 CFR 178.975 - Top lift test.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Packagings design types designed to be lifted from the top, there may be no permanent deformation which renders the Large Packagings unsafe for transport and no loss of contents. ... design types must be filled to six times the maximum permissible gross mass, the load being evenly...

49 CFR 178.975 - Top lift test.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Packagings design types designed to be lifted from the top, there may be no permanent deformation which renders the Large Packagings unsafe for transport and no loss of contents. ... design types must be filled to six times the maximum permissible gross mass, the load being evenly...

49 CFR 178.975 - Top lift test.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Packagings design types designed to be lifted from the top, there may be no permanent deformation which renders the Large Packagings unsafe for transport and no loss of contents. ... design types must be filled to six times the maximum permissible gross mass, the load being evenly...

49 CFR 178.975 - Top lift test.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Packagings design types designed to be lifted from the top, there may be no permanent deformation which renders the Large Packagings unsafe for transport and no loss of contents. ... design types must be filled to six times the maximum permissible gross mass, the load being evenly...

The results of pre-design studies on the development of a new design of gas turbine compressor package of GPA-C-16 type

NASA Astrophysics Data System (ADS)

Smirnov, A. V.; Chobenko, V. M.; Shcherbakov, O. M.; Ushakov, S. M.; Parafiynyk, V. P.; Sereda, R. M.

2017-08-01

The article summarizes the results of analysis of data concerning the operation of turbocompressor packages at compressor stations for the natural gas transmission system of Ukraine. The basic requirements for gas turbine compressor packages used for modernization and reconstruction of compressor stations are considered. Using a 16 MW gas turbine package GPA-C-16S/76-1,44M1 as an example, the results of pre-design studies and some technical solutions that improve the energy efficiency of gas turbine compressor packages and their reliability, as well as its environmental performance are given. In particular, the article deals with the matching of performance characteristics of a centrifugal compressor (hereinafter compressor) and gas turbine drive to reduce fuel gas consumption; as well as application of energy efficient technologies, in particular, exhaust gas heat recovery units and gas-oil heat exchangers in turbocompressor packages oil system; as well as reducing emissions of carbon monoxide into the atmosphere using a catalytic exhaust system. Described technical solutions can be used for development of other types of gas turbine compressor packages.

Packaging for Posterity.

ERIC Educational Resources Information Center

Sias, Jim

1990-01-01

A project in which students designed environmentally responsible food packaging is described. The problem definition; research on topics such as waste paper, plastic, metal, glass, incineration, recycling, and consumer preferences; and the presentation design are provided. (KR)

graphkernels: R and Python packages for graph comparison

PubMed Central

Ghisu, M Elisabetta; Llinares-López, Felipe; Borgwardt, Karsten

2018-01-01

Abstract Summary Measuring the similarity of graphs is a fundamental step in the analysis of graph-structured data, which is omnipresent in computational biology. Graph kernels have been proposed as a powerful and efficient approach to this problem of graph comparison. Here we provide graphkernels, the first R and Python graph kernel libraries including baseline kernels such as label histogram based kernels, classic graph kernels such as random walk based kernels, and the state-of-the-art Weisfeiler-Lehman graph kernel. The core of all graph kernels is implemented in C ++ for efficiency. Using the kernel matrices computed by the package, we can easily perform tasks such as classification, regression and clustering on graph-structured samples. Availability and implementation The R and Python packages including source code are available at https://CRAN.R-project.org/package=graphkernels and https://pypi.python.org/pypi/graphkernels. Contact mahito@nii.ac.jp or elisabetta.ghisu@bsse.ethz.ch Supplementary information Supplementary data are available online at Bioinformatics. PMID:29028902

graphkernels: R and Python packages for graph comparison.

PubMed

Sugiyama, Mahito; Ghisu, M Elisabetta; Llinares-López, Felipe; Borgwardt, Karsten

2018-02-01

Measuring the similarity of graphs is a fundamental step in the analysis of graph-structured data, which is omnipresent in computational biology. Graph kernels have been proposed as a powerful and efficient approach to this problem of graph comparison. Here we provide graphkernels, the first R and Python graph kernel libraries including baseline kernels such as label histogram based kernels, classic graph kernels such as random walk based kernels, and the state-of-the-art Weisfeiler-Lehman graph kernel. The core of all graph kernels is implemented in C ++ for efficiency. Using the kernel matrices computed by the package, we can easily perform tasks such as classification, regression and clustering on graph-structured samples. The R and Python packages including source code are available at https://CRAN.R-project.org/package=graphkernels and https://pypi.python.org/pypi/graphkernels. mahito@nii.ac.jp or elisabetta.ghisu@bsse.ethz.ch. Supplementary data are available online at Bioinformatics. © The Author(s) 2017. Published by Oxford University Press.

76 FR 30551 - Specifications for Packagings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-26

... 178 Specifications for Packagings CFR Correction In Title 49 of the Code of Federal Regulations, Parts... design qualification test and each periodic retest on a packaging, a test report must be prepared. The test report must be maintained at each location where the packaging is manufactured and each location...

Feeding Strategies Derived from Behavioral Economics and Psychology Can Increase Vegetable Intake in Children as Part of a Home-Based Intervention: Results of a Pilot Study.

PubMed

Cravener, Terri L; Schlechter, Haley; Loeb, Katharine L; Radnitz, Cynthia; Schwartz, Marlene; Zucker, Nancy; Finkelstein, Stacey; Wang, Y Claire; Rolls, Barbara J; Keller, Kathleen L

2015-11-01

Behavioral economics and psychology have been applied to altering food choice, but most studies have not measured food intake under free-living conditions. To test the effects of a strategy that pairs positive stimuli (ie, stickers and cartoon packaging) with vegetables and presents them as the default snack. A randomized controlled trial was conducted with children who reported consumption of fewer than two servings of vegetables daily. Children (aged 3 to 5 years) in both control (n=12) and treatment (n=12) groups received a week's supply of plainly packaged (ie, generic) vegetables, presented by parents as a free choice with an alternative snack (granola bar), during baseline (Week 1) and follow-up (Week 4). During Weeks 2 and 3, the control group continued to receive generic packages of vegetables presented as a free choice, but the treatment group received vegetables packaged in containers with favorite cartoon characters and stickers inside, presented by parents as the default choice. Children in the treatment group were allowed to opt out of the vegetables and request the granola bar after an imposed 5-minute wait. General Linear Model repeated measures analysis of variance was conducted to compare vegetable and granola bar intake between control and treatment groups across the 4-week study. Both within- and between-subjects models were tested. A time×treatment interaction on vegetable intake was significant. The treatment group increased vegetable intake from baseline to Week 2 relative to control (P<0.01), but the effects were not sustained at Week 4 when the treatment was removed. Granola bar intake decreased in the treatment group at Week 2 (P≤0.001) and Week 3 (P≤0.005) relative to baseline. Parents were able to administer feeding practices derived from behavioral economics and psychology in the home to increase children's vegetable intake and decrease intake of a high-energy-density snack. Additional studies are needed to test the long-term sustainability of these practices. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Status of Progress Made Toward Preliminary Design Concepts for the Inventory in Select Media for DOE-Managed HLW/SNF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matteo, Edward N.; Hardin, Ernest L.; Hadgu, Teklu

As the title suggests, this report provides a summary of the status and progress for the Preliminary Design Concepts Work Package. Described herein are design concepts and thermal analysis for crystalline and salt host media. The report concludes that thermal management of defense waste, including the relatively small subset of high thermal output waste packages, is readily achievable. Another important conclusion pertains to engineering feasibility, and design concepts presented herein are based upon established and existing elements and/or designs. The multipack configuration options for the crystalline host media pose the greatest engineering challenges, as these designs involve large, heavy wastemore » packages that pose specific challenges with respect to handling and emplacement. Defense-related Spent Nuclear Fuel (DSNF) presents issues for post-closure criticality control, and a key recommendation made herein relates to the need for special packaging design that includes neutron-absorbing material for the DSNF. Lastly, this report finds that the preliminary design options discussed are tenable for operational and post-closure safety, owing to the fact that these concepts have been derived from other published and well-studied repository designs.« less

10 CFR 71.43 - General standards for all packages.

Code of Federal Regulations, 2011 CFR

2011-01-01

... reaction resulting from inleakage of water, to the maximum credible extent. Account must be taken of the... that there will be no significant chemical, galvanic, or other reaction among the packaging components... packaging. (g) A package must be designed, constructed, and prepared for transport so that in still air at...

10 CFR 71.43 - General standards for all packages.

Code of Federal Regulations, 2010 CFR

2010-01-01

... reaction resulting from inleakage of water, to the maximum credible extent. Account must be taken of the... that there will be no significant chemical, galvanic, or other reaction among the packaging components... packaging. (g) A package must be designed, constructed, and prepared for transport so that in still air at...

A Portable Presentation Package for Audio-Visual Instruction. Technical Documentary Report.

ERIC Educational Resources Information Center

Smith, Edgar A.; And Others

The Portable Presentation Package is a prototype of an audiovisual equipment package designed to facilitate technical training in remote areas, situations in which written communications are difficult, or in situations requiring rapid presentation of instructional material. The major criteria employed in developing the package were (1) that the…

A predictive model to allocate frequent service users of community-based mental health services to different packages of care.

PubMed

Grigoletti, Laura; Amaddeo, Francesco; Grassi, Aldrigo; Boldrini, Massimo; Chiappelli, Marco; Percudani, Mauro; Catapano, Francesco; Fiorillo, Andrea; Perris, Francesco; Bacigalupi, Maurizio; Albanese, Paolo; Simonetti, Simona; De Agostini, Paola; Tansella, Michele

2010-01-01

To develop predictive models to allocate patients into frequent and low service users groups within the Italian Community-based Mental Health Services (CMHSs). To allocate frequent users to different packages of care, identifying the costs of these packages. Socio-demographic and clinical data and GAF scores at baseline were collected for 1250 users attending five CMHSs. All psychiatric contacts made by these patients during six months were recorded. A logistic regression identified frequent service users predictive variables. Multinomial logistic regression identified variables able to predict the most appropriate package of care. A cost function was utilised to estimate costs. Frequent service users were 49%, using nearly 90% of all contacts. The model classified correctly 80% of users in the frequent and low users groups. Three packages of care were identified: Basic Community Treatment (4,133 Euro per six months); Intensive Community Treatment (6,180 Euro) and Rehabilitative Community Treatment (11,984 Euro) for 83%, 6% and 11% of frequent service users respectively. The model was found to be accurate for 85% of users. It is possible to develop predictive models to identify frequent service users and to assign them to pre-defined packages of care, and to use these models to inform the funding of psychiatric care.

49 CFR 173.411 - Industrial packagings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... comparative data showing that the construction methods, packaging design, and materials of construction comply...-1 must meet the general design requirements prescribed in § 173.410. (2) Each IP-2 must meet the general design requirements prescribed in § 173.410 and when subjected to the tests specified in § 173.465...

49 CFR 173.411 - Industrial packagings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... comparative data showing that the construction methods, packaging design, and materials of construction comply...-1 must meet the general design requirements prescribed in § 173.410. (2) Each IP-2 must meet the general design requirements prescribed in § 173.410 and when subjected to the tests specified in § 173.465...

49 CFR 173.411 - Industrial packagings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... comparative data showing that the construction methods, packaging design, and materials of construction comply...-1 must meet the general design requirements prescribed in § 173.410. (2) Each IP-2 must meet the general design requirements prescribed in § 173.410 and when subjected to the tests specified in § 173.465...

49 CFR 173.411 - Industrial packagings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... comparative data showing that the construction methods, packaging design, and materials of construction comply...-1 must meet the general design requirements prescribed in § 173.410. (2) Each IP-2 must meet the general design requirements prescribed in § 173.410 and when subjected to the tests specified in § 173.465...

Residential solar-heating system-design package

NASA Technical Reports Server (NTRS)

1979-01-01

Design package for modular solar heating system includes performance specifications, design data, installation guidelines, and other information that should be valuable to those interested in system (or similar systems) for projected installation. When installed in insulated "energy saver" home, system can supply large percentage of total energy needs of building.

75 FR 23067 - Medicaid Program; State Flexibility for Medicaid Benefit Packages

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... State governments. Within broad Federal guidelines, each State determines the design of its program... Health Benefits Coverage At proposed Sec. 440.335, we proposed to provide that if a State designs or... the same Medicaid benefits statewide, meaning States could design different benefit packages for rural...

Development of Design Guidance for K-12 Schools: From 30% to 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, S.; Torcellini, P.; Long, N.

2008-01-01

This paper describes the development of energy efficiency recommendations for achieving 30% whole-building energy savings in K-12 Schools over levels achieved by following the ANSI/ASHRAE/IESNA Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings (1999 and 2004 versions). Exhaustive simulations were run to create packages of energy design solutions available over a wide range of K-12 schools and climates. These design recommendations look at building envelope, fenestration, lighting systems (including electrical lights and daylighting), HVAC systems, building automation and controls, outside air treatment, and service water heating. We document and discuss the energy modeling performed to demonstrate that themore » recommendations will result in at least 30% energy savings over ASHRAE 90.1-1999 and ASHRAE 90.1-2004. Recommendations are evaluated based on the availability of daylighting for the school and by the type of HVAC system. Compared to the ASHRAE 90.1-1999 baseline, the recommendations result in more than 30% savings in all climate zones for both daylit and nondaylit elementary, middle, and high schools with a range of HVAC system types. These recommendations have been included in the Advanced Energy Design Guide for K-12 School Buildings. Compared to the more stringent ASHRAE 90.1-2004 baseline, the recommendations result in more than 30% savings in all climate zones, for only the daylit elementary, middle, and high schools, with a range of HVAC system types. To inform the future development of recommendations for higher level of energy savings, we analyzed a subset of recommendations to understand which energy efficiency technologies would be needed to achieve 50% energy savings.« less

Impact of building forms on thermal performance and thermal comfort conditions in religious buildings in hot climates: a case study in Sharjah city

NASA Astrophysics Data System (ADS)

Mushtaha, Emad; Helmy, Omar

2017-11-01

The common system used for thermal regulation in mosques of United Arab Emirates (UAE) is the heating, ventilating and air-conditioning (HVAC) system. This system increases demands on energy consumption and increases CO2 emission. A passive design approach is one of the measures to reduce these problems. This study involved an analytical examination of building forms, followed by testing the impact of these forms on its thermal performance and indoor thermal comfort. The tests were conducted using energy simulations software packages. Passive parameters such as shading devices, thermal insulation and natural ventilation were applied in six cases, including the baseline case within each form. The obtained results showed a significant effect of mosque forms as well as passive design techniques on the thermal comfort within the structures. The findings confirmed that the use of passive design alone would not help achieve thermal comfort, but reduce the annual energy consumption by10%. By integrating a hybrid air-conditioning system as another supporting approach, the annual energy consumption could be reduced by 67.5%, which allows for the designing of a much smaller HVAC system.

Quartz/fused silica chip carriers

NASA Technical Reports Server (NTRS)

1992-01-01

The primary objective of this research and development effort was to develop monolithic microwave integrated circuit (MMIC) packaging which will operate efficiently at millimeter-wave frequencies. The packages incorporated fused silica as the substrate material which was selected due to its favorable electrical properties and potential performance improvement over more conventional materials for Ka-band operation. The first step towards meeting this objective is to develop a package that meets standard mechanical and thermal requirements using fused silica and to be compatible with semiconductor devices operating up to at least 44 GHz. The second step is to modify the package design and add multilayer and multicavity capacity to allow for application specific integrated circuits (ASIC's) to control multiple phase shifters. The final step is to adapt the package design to a phased array module with integral radiating elements. The first task was a continuation of the SBIR Phase 1 work. Phase 1 identified fused silica as a viable substrate material by demonstrating various plating, machining, and adhesion properties. In Phase 2 Task 1, a package was designed and fabricated to validate these findings. Task 2 was to take the next step in packaging and fabricate a multilayer, multichip module (MCM). This package is the predecessor to the phased array module and demonstrates the ability to via fill, circuit print, laminate, and to form vertical interconnects. The final task was to build a phased array module. The radiating elements were to be incorporated into the package instead of connecting to it with wire or ribbon bonds.

A portable thoracic closed drainage instrument for hemopneumothorax.

PubMed

Tang, Hua; Pan, Tiewen; Qin, Xiong; Xue, Lei; Wu, Bin; Zhao, Xuewei; Sun, Guangyuan; Yuan, Xinyu; Xu, Zhifei

2012-03-01

Hemopneumothorax is a common sequelae of traumatic thoracic injury. The most effective treatment of this condition is thoracic drainage. Despite the common occurrence of this condition, available instruments are difficult to use emergently, particularly when large amounts of patients need to be drained. In the present experiment, a newly designed chest tube and thoracic closed drainage package is described and preliminarily evaluated with the goal to improve the treatment of traumatic hemopneumothorax. Twenty canines were divided into two groups. In one group, the newly designed thoracic closed drainage package was used, whereas in the other group a currently available chest tube and bottle were used. Drainage test, ultrasound examination, flushing test, and tension test were performed to evaluate the effectiveness of the drainage package. We found that the newly-designed drainage tube is as effective as the common tube when evaluated using all of the chosen methods. In addition, the package is very lightweight and portable. The newly-designed thoracic drainage package is very effective in the emergency treatment of thoracic trauma and may be more suitable for the emergency treatment of hemopneumothorax.

Common Ada (tradename) Missile Package (CAMP) Project. Missile Software Parts. Volume 8. Detail Design Document

DTIC Science & Technology

1988-03-01

PACKAGE BODY ) TLCSC P661 (CATALOG #P106-0) This package contains the CAMP parts required to do the vaypoint steering portion of navigation. The...3.3.4.1.6 PROCESSING The following describes the processing performed by this part: package body WaypointSteering is package body ...Steering_Vector_Operations is separate; package body Steering_Vector_Operations_with_Arcsin is separate; procedure Compute Turn_Angle_and Direction (UnitNormal C

Design Brief--Packaging: More than Just a Box! Communications: Getting the Message across with Advertising. Technology Learning Activities.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

Each technology learning activity in this article includes content description, objectives, required materials, challenge, and evaluation questions. Subjects are designing product packages and communication through advertising. (SK)

Selection of software for mechanical engineering undergraduates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheah, C. T.; Yin, C. S.; Halim, T.

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

Creative Thinking Package

ERIC Educational Resources Information Center

Jones, Clive

1972-01-01

A look at the latest package from a British managment training organization, which explains and demonstrates creative thinking techniques, including brainstorming. The package, designed for groups of twelve or more, consists of tapes, visuals, and associated exercises. (Editor/JB)

Comparative Packaging Study

NASA Technical Reports Server (NTRS)

Perchonok, Michele; Antonini, David

2008-01-01

This viewgraph presentation describes a comparative packaging study for use on long duration space missions. The topics include: 1) Purpose; 2) Deliverables; 3) Food Sample Selection; 4) Experimental Design Matrix; 5) Permeation Rate Comparison; and 6) Packaging Material Information.

Food Companies’ Calorie-Reduction Pledges to Improve U.S. Diet

PubMed Central

Slining, Meghan M.; Ng, Shu Wen; Popkin, Barry M.

2013-01-01

Heretofore, corporate voluntary pledges to improve the health of Americans have been linked neither to explicit measurable commitments nor to a framework for an independent evaluation. The Healthy Weight Commitment Foundation (HWCF), whose members include 16 of the nation’s leading consumer packaged goods food and beverage manufacturers, voluntarily pledged to collectively remove 1 trillion calories from their products by 2012 (against a 2007 baseline), and 1.5 trillion calories by 2015. The pledge is designed to reduce the calorie gap commensurate with the HWCF companies’ role in the U.S. diet. To date, no system exists for documenting the nutritional and public health impacts of industry-led changes in the food supply on individual diets. The current study represents a unique opportunity to understand how the consumer packaged goods food and beverage sector is changing and how these changes are associated with changes in the American diet. It presents data on national caloric sales from this sector, purchases of these goods by various subpopulations, and methods linking these to individual intakes of Americans. Findings show that HWCF companies accounted for approximately 25% of calories consumed in the U.S. in 2007 and that the 1.5 trillion–calorie pledge (about 14 calories/day/capita) accounts for 0.8% of the calories sold across all consumer packaged goods food and beverage brands in 2007. The authors hope that this evaluation will continue to create models and methods for demonstrating the effects of changes in the food supply on individual diets, particularly among those from vulnerable subpopulations. PMID:23332336

Radiometric packaging of uncooled bolometric infrared focal plane arrays

NASA Astrophysics Data System (ADS)

García-Blanco, Sonia; Pope, Timothy; Côté, Patrice; Leclerc, Mélanie; Ngo Phong, Linh; Châteauneuf, François

2017-11-01

INO has a wide experience in the design and fabrication of different kinds of microbolometer focal plane arrays (FPAs). In particular, a 512x3 pixel microbolometer FPA has been selected as the sensor for the New Infrared Sensor Technology (NIRST) instrument, one of the payloads of the SACD/Aquarius mission. In order to make the absolute temperature measurements necessary for many infrared Earth observation applications, the microbolometer FPA must be integrated into a package offering a very stable thermal environment. The radiometric packaging technology developed at INO presents an innovative approach since it was conceived to be modular and adaptable for the packaging of different microbolometer FPAs and for different sets of assembly requirements without need for requalification of the assembly process. The development of the radiometric packaging technology has broadened the position of INO as a supplier of radiometric detector modules integrating FPAs of microbolometers inside a radiometric package capable of achieving the requirements of different space missions. This paper gives an overview of the design of INO's radiometric package. Key performance parameters are also discussed and the test campaign conducted with the radiometric package is presented.

Thermal Cycle Reliability and Failure Mechanisms of CCGA and PBGA Assemblies with and without Corner Staking

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2008-01-01

Area array packages (AAPs) with 1.27 mm pitch have been the packages of choice for commercial applications; they are now starting to be implemented for use in military and aerospace applications. Thermal cycling characteristics of plastic ball grid array (PBGA) and chip scale package assemblies, because of their wide usage for commercial applications, have been extensively reported on in literature. Thermal cycling represents the on-off environmental condition for most electronic products and therefore is a key factor that defines reliability.However, very limited data is available for thermal cycling behavior of ceramic packages commonly used for the aerospace applications. For high reliability applications, numerous AAPs are available with an identical design pattern both in ceramic and plastic packages. This paper compares assembly reliability of ceramic and plastic packages with the identical inputs/outputs(I/Os) and pattern. The ceramic package was in the form of ceramic column grid array (CCGA) with 560 I/Os peripheral array with the identical pad design as its plastic counterpart.

A CAD approach to magnetic bearing design

NASA Technical Reports Server (NTRS)

Jeyaseelan, M.; Anand, D. K.; Kirk, J. A.

1988-01-01

A design methodology has been developed at the Magnetic Bearing Research Laboratory for designing magnetic bearings using a CAD approach. This is used in the algorithm of an interactive design software package. The package is a design tool developed to enable the designer to simulate the entire process of design and analysis of the system. Its capabilities include interactive input/modification of geometry, finding any possible saturation at critical sections of the system, and the design and analysis of a control system that stabilizes and maintains magnetic suspension.

MODEL 9977 B(M)F-96 SAFETY ANALYSIS REPORT FOR PACKAGING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramczyk, G; Paul Blanton, P; Kurt Eberl, K

2006-05-18

This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on and for the 9977 Shipping Package, referred to as the General Purpose Fissile Package (GPFP). The performance evaluation presented in this SARP documents the compliance of the 9977 package with the regulatory safety requirements for Type B packages. Per 10 CFR 71.59, for the 9977 packages evaluated in this SARP, the value of ''N'' is 50, and the Transport Index based on nuclear criticality control is 1.0. The 9977 package is designed with a high degree of single containment. The 9977 complies with 10 CFR 71more » (2002), Department of Energy (DOE) Order 460.1B, DOE Order 460.2, and 10 CFR 20 (2003) for As Low As Reasonably Achievable (ALARA) principles. The 9977 also satisfies the requirements of the Regulations for the Safe Transport of Radioactive Material--1996 Edition (Revised)--Requirements. IAEA Safety Standards, Safety Series No. TS-R-1 (ST-1, Rev.), International Atomic Energy Agency, Vienna, Austria (2000). The 9977 package is designed, analyzed and fabricated in accordance with Section III of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code, 1992 edition.« less

27 CFR 41.72 - Notice for smokeless tobacco.

Code of Federal Regulations, 2010 CFR

2010-04-01

... designation. Every package of chewing tobacco or snuff shall, before removal subject to internal revenue tax, have adequately imprinted thereon, or on a label securely affixed thereto, the designation “chewing tobacco” or “snuff.” As an alternative, packages of chewing tobacco may be designated “Tax Class C,” and...

A Framework for the Flexible Content Packaging of Learning Objects and Learning Designs

ERIC Educational Resources Information Center

Lukasiak, Jason; Agostinho, Shirley; Burnett, Ian; Drury, Gerrard; Goodes, Jason; Bennett, Sue; Lockyer, Lori; Harper, Barry

2004-01-01

This paper presents a platform-independent method for packaging learning objects and learning designs. The method, entitled a Smart Learning Design Framework, is based on the MPEG-21 standard, and uses IEEE Learning Object Metadata (LOM) to provide bibliographic, technical, and pedagogical descriptors for the retrieval and description of learning…

Promoting Snack Time Interactions of Children with Autism in a Malaysian Preschool

ERIC Educational Resources Information Center

Lee, Soo Hoon; Lee, Lay Wah

2015-01-01

The purpose of this study was to examine the effects of a comprehensive social skills intervention package combining peer-mediated strategies and environmental arrangements on the peer interactions of three children with autism in a Malaysian preschool. Following baseline, nine typically developing children participated in social initiation…

HALT to qualify electronic packages: a proof of concept

NASA Astrophysics Data System (ADS)

Ramesham, Rajeshuni

2014-03-01

A proof of concept of the Highly Accelerated Life Testing (HALT) technique was explored to assess and optimize electronic packaging designs for long duration deep space missions in a wide temperature range (-150°C to +125°C). HALT is a custom hybrid package suite of testing techniques using environments such as extreme temperatures and dynamic shock step processing from 0g up to 50g of acceleration. HALT testing used in this study implemented repetitive shock on the test vehicle components at various temperatures to precipitate workmanship and/or manufacturing defects to show the weak links of the designs. The purpose is to reduce the product development cycle time for improvements to the packaging design qualification. A test article was built using advanced electronic package designs and surface mount technology processes, which are considered useful for a variety of JPL and NASA projects, i.e. (surface mount packages such as ball grid arrays (BGA), plastic ball grid arrays (PBGA), very thin chip array ball grid array (CVBGA), quad flat-pack (QFP), micro-lead-frame (MLF) packages, several passive components, etc.). These packages were daisy-chained and independently monitored during the HALT test. The HALT technique was then implemented to predict reliability and assess survivability of these advanced packaging techniques for long duration deep space missions in much shorter test durations. Test articles were built using advanced electronic package designs that are considered useful in various NASA projects. All the advanced electronic packages were daisychained independently to monitor the continuity of the individual electronic packages. Continuity of the daisy chain packages was monitored during the HALT testing using a data logging system. We were able to test the boards up to 40g to 50g shock levels at temperatures ranging from +125°C to -150°C. The HALT system can deliver 50g shock levels at room temperature. Several tests were performed by subjecting the test boards to various g levels ranging from 5g to 50g, test durations of 10 minutes to 60 minutes, hot temperatures of up to +125°C and cold temperatures down to -150°C. During the HALT test, electrical continuity measurements of the PBGA package showed an open-circuit, whereas the BGA, MLF, and QFPs showed signs of small variations of electrical continuity measurements. The electrical continuity anomaly of the PBGA occurred in the test board within 12 hours of commencing the accelerated test. Similar test boards were assembled, thermal cycled independently from -150°C to +125°C and monitored for electrical continuity through each package design. The PBGA package on the test board showed an anomalous electrical continuity behavior after 959 thermal cycles. Each thermal cycle took around 2.33 hours, so that a total test time to failure of the PBGA was 2,237 hours (or ~3.1 months) due to thermal cycling alone. The accelerated technique (thermal cycling + shock) required only 12 hours to cause a failure in the PBGA electronic package. Compared to the thermal cycle only test, this was an acceleration of ~186 times (more than 2 orders of magnitude). This acceleration process can save significant time and resources for predicting the life of a package component in a given environment, assuming the failure mechanisms are similar in both the tests. Further studies are in progress to make systematic evaluations of the HALT technique on various other advanced electronic packaging components on the test board. With this information one will be able to estimate the number of mission thermal cycles to failure with a much shorter test program. Further studies are in progress to make systematic study of various components, constant temperature range for both the tests. Therefore, one can estimate the number of hours to fail in a given thermal and shock levels for a given test board physical properties.

Promoting reintegration of National Guard veterans and their partners using a self-directed program of integrative therapies: a pilot study.

PubMed

Collinge, William; Kahn, Janet; Soltysik, Robert

2012-12-01

This article reports pilot data from phase I of a project to develop and evaluate a self-directed program of integrative therapies for National Guard personnel and significant relationship partners to support reintegration and resilience after return from Iraq or Afghanistan. Data are reported on 43 dyads. Intervention was an integrated multimedia package of guided meditative, contemplative, and relaxation exercises (CD) and instruction in simple massage techniques (DVD) to promote stress reduction and interpersonal connectedness. A repeated measures design with standardized instruments was used to establish stability of baseline levels of relevant mental health domains (day 1, day 30), followed by the intervention and assessments 4 and 8 weeks later. Significant improvements in standardized measures for post-traumatic stress disorder, depression, and self-compassion were seen in both veterans and partners; and in stress for partners. Weekly online reporting tracked utilization of guided exercises and massage. Veterans reported significant reductions in ratings of physical pain, physical tension, irritability, anxiety/worry, and depression after massage, and longitudinal analysis suggested declining baseline levels of tension and irritability. Qualitative data from focus groups and implications for continued development and a phase II trial are discussed.

simuwatt - A Tablet Based Electronic Auditing Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macumber, Daniel; Parker, Andrew; Lisell, Lars

2014-05-08

'simuwatt Energy Auditor' (TM) is a new tablet-based electronic auditing tool that is designed to dramatically reduce the time and cost to perform investment-grade audits and improve quality and consistency. The tool uses the U.S. Department of Energy's OpenStudio modeling platform and integrated Building Component Library to automate modeling and analysis. simuwatt's software-guided workflow helps users gather required data, and provides the data in a standard electronic format that is automatically converted to a baseline OpenStudio model for energy analysis. The baseline energy model is calibrated against actual monthly energy use to ASHRAE Standard 14 guidelines. Energy conservation measures frommore » the Building Component Library are then evaluated using OpenStudio's parametric analysis capability. Automated reporting creates audit documents that describe recommended packages of energy conservation measures. The development of this tool was partially funded by the U.S. Department of Defense's Environmental Security Technology Certification Program. As part of this program, the tool is being tested at 13 buildings on 5 Department of Defense sites across the United States. Results of the first simuwatt audit tool demonstration are presented in this paper.« less

Package design and nutritional profile of foods targeted at children in supermarkets in Montevideo, Uruguay.

PubMed

Giménez, Ana; Saldamando, Luis de; Curutchet, María Rosa; Ares, Gastón

2017-06-12

Marketing of unhealthy products has been identified as one of the main characteristics of the food environment that negatively affects children's eating patterns. Restrictions on advertising of unhealthy foods to children have already been imposed in different countries. However, marketing strategies are not limited to broadcast and digital advertising, but also include package design. In this context, the current study aimed to describe the food products targeted at children and sold in supermarkets in Montevideo, Uruguay, in terms of package design and nutrient profile. Two supermarkets in Montevideo were selected for data collection. In each supermarket, all products targeted at children were identified. Products were analyzed in terms of package design and nutritional profile, considering the Pan American Health Organization Nutrient Profile Model. A total of 180 unique products were identified, which included a wide range of product categories. The great majority of the products corresponded to ultra-processed products with excessive amounts of sodium, free sugars, total fat, saturated fat, and/or trans fat, which are not recommended for frequent consumption. Several marketing strategies were identified in the design of packages to attract children's attention and drive their preferences. The most common strategies were the inclusion of cartoon characters, bright colors, childish lettering, and a wide range of claims related to health and nutrition, as well as the products' sensory and hedonic characteristics. The study's findings provide additional evidence on the need to regulate packaging of products targeted at children.

Effectiveness of a nutrition education package in improving feeding practices, dietary adequacy and growth of infants and young children in rural Tanzania: rationale, design and methods of a cluster randomised trial.

PubMed

Kulwa, Kissa B M; Verstraeten, Roosmarijn; Bouckaert, Kimberley P; Mamiro, Peter S; Kolsteren, Patrick W; Lachat, Carl

2014-10-16

Strategies to improve infant and young child nutrition in low- and middle- income countries need to be implemented at scale. We contextualised and packaged successful strategies into a feasible intervention for implementation in rural Tanzania. Opportunities that can optimise delivery of the intervention and encourage behaviour change include mothers willingness to modifying practices; support of family members; seasonal availability and accessibility of foods; established set-up of village peers and functioning health system. The primary objective of the study is to evaluate the effectiveness of a nutrition education package in improving feeding practices, dietary adequacy and growth as compared to routine health education. A parallel cluster randomised controlled trial will be conducted in rural central Tanzania in 9 intervention and 9 control villages. The control group will receive routine health education offered monthly by health staff at health facilities. The intervention group will receive a nutrition education package in addition to the routine health education. The education package is comprised of four components: 1) education and counselling of mothers, 2) training community-based nutrition counsellors and monthly home visits, 3) sensitisation meetings with health staff and family members, and 4) supervision of community-based nutrition counsellors. The duration of the intervention is 9 months and infants will be recruited at 6 months of age. Primary outcome (linear growth as length-for-age Z-scores) and secondary outcomes (changes in weight-for-length Z-scores; mean intake of energy, fat, iron and zinc from complementary foods; proportion of children consuming 4 or more food groups and recommended number of semi-solid/soft meals and snacks per day; maternal level of knowledge and performance of recommended practices) will be assessed at baseline and ages 9, 12 and 15 months. Process evaluation will document reach, dose and fidelity of the intervention and context at 8 and 15 months. Results of the trial will provide evidence of the effectiveness of the nutrition education package in community settings of rural Tanzania. They will provide recommendations for strengthening the nutrition component of health education in child health services. ClinicalTrials.gov Identifier: NCT02249754, September 25, 2014.

Motivation, values, and work design as drivers of participation in the R open source project for statistical computing

PubMed Central

Mair, Patrick; Hofmann, Eva; Gruber, Kathrin; Hatzinger, Reinhold; Zeileis, Achim; Hornik, Kurt

2015-01-01

One of the cornerstones of the R system for statistical computing is the multitude of packages contributed by numerous package authors. This amount of packages makes an extremely broad range of statistical techniques and other quantitative methods freely available. Thus far, no empirical study has investigated psychological factors that drive authors to participate in the R project. This article presents a study of R package authors, collecting data on different types of participation (number of packages, participation in mailing lists, participation in conferences), three psychological scales (types of motivation, psychological values, and work design characteristics), and various socio-demographic factors. The data are analyzed using item response models and subsequent generalized linear models, showing that the most important determinants for participation are a hybrid form of motivation and the social characteristics of the work design. Other factors are found to have less impact or influence only specific aspects of participation. PMID:26554005

Motivation, values, and work design as drivers of participation in the R open source project for statistical computing.

PubMed

Mair, Patrick; Hofmann, Eva; Gruber, Kathrin; Hatzinger, Reinhold; Zeileis, Achim; Hornik, Kurt

2015-12-01

One of the cornerstones of the R system for statistical computing is the multitude of packages contributed by numerous package authors. This amount of packages makes an extremely broad range of statistical techniques and other quantitative methods freely available. Thus far, no empirical study has investigated psychological factors that drive authors to participate in the R project. This article presents a study of R package authors, collecting data on different types of participation (number of packages, participation in mailing lists, participation in conferences), three psychological scales (types of motivation, psychological values, and work design characteristics), and various socio-demographic factors. The data are analyzed using item response models and subsequent generalized linear models, showing that the most important determinants for participation are a hybrid form of motivation and the social characteristics of the work design. Other factors are found to have less impact or influence only specific aspects of participation.

Intervention for Anxiety and Problem Behavior in Children with Autism Spectrum Disorder and Intellectual Disability.

PubMed

Moskowitz, Lauren J; Walsh, Caitlin E; Mulder, Emile; McLaughlin, Darlene Magito; Hajcak, Greg; Carr, Edward G; Zarcone, Jennifer R

2017-12-01

There is little research on the functional assessment and treatment of anxiety and related problem behavior in children with autism spectrum disorder (ASD), particularly those with intellectual and developmental disability (IDD). In a recent study, we evaluated a multimethod strategy for assessing anxiety in children with ASD and IDD (Am J Intellect Dev Disabil 118:419-434, 2013). In the present study, we developed treatments for the anxiety and associated problem behavior in these same children. A multiple baseline design was used to evaluate the effectiveness of a multicomponent intervention package, incorporating individualized strategies from Positive Behavior Support and Cognitive Behavioral Therapy. During intervention, all three participants showed substantial decreases in anxiety and problem behavior and significant increases in respiratory sinus arrhythmia in the situations that had previously been identified as anxiety-provoking.

Skylab mobile laboratory

NASA Technical Reports Server (NTRS)

Primeaux, G. R.; Larue, M. A.

1975-01-01

The Skylab mobile laboratory was designed to provide the capability to obtain necessary data on the Skylab crewmen 30 days before lift-off, within 1 hour after recovery, and until preflight physiological baselines were reattained. The mobile laboratory complex consisted of six laboratories that supported cardiovascular, metabolic, nutrition and endocrinology, operational medicine, blood, and microbiology experiments; a utility package; and two shipping containers. The objectives and equipment requirements of the Skylab mobile laboratory and the data acquisition systems are discussed along with processes such as permanently mounting equipment in the individual laboratories and methods of testing and transporting the units. The operational performance, in terms of amounts of data collected, and the concept of mobile laboratories for medical and scientific experiments are evaluated. The Skylab mobile laboratory succeeded in facilitating the data collection and sample preservation associated with the three Skylab manned flights.

49 CFR 173.24a - Additional general requirements for non-bulk packagings and packages.

Code of Federal Regulations, 2011 CFR

2011-10-01

... design. Except as provided in § 172.312 of this subchapter: (1) Inner packaging closures. A combination... packed, secured and cushioned to prevent their breakage or leakage and to control their shifting within... Group I packaging may be used for a Packing Group II material with a specific gravity not exceeding the...

49 CFR 173.24a - Additional general requirements for non-bulk packagings and packages.

Code of Federal Regulations, 2014 CFR

2014-10-01

... design. Except as provided in § 172.312 of this subchapter: (1) Inner packaging closures. A combination... packed, secured and cushioned to prevent their breakage or leakage and to control their shifting within... Group I packaging may be used for a Packing Group II material with a specific gravity not exceeding the...

10 CFR 71.45 - Lifting and tie-down standards for all packages.

Code of Federal Regulations, 2011 CFR

2011-01-01

... that failure of any lifting device under excessive load would not impair the ability of the package to... its yield strength, a static force applied to the center of gravity of the package having a vertical... package must be designed so that failure of the device under excessive load would not impair the ability...

10 CFR 71.45 - Lifting and tie-down standards for all packages.

Code of Federal Regulations, 2014 CFR

2014-01-01

... that failure of any lifting device under excessive load would not impair the ability of the package to... its yield strength, a static force applied to the center of gravity of the package having a vertical... package must be designed so that failure of the device under excessive load would not impair the ability...

10 CFR 71.45 - Lifting and tie-down standards for all packages.

Code of Federal Regulations, 2012 CFR

2012-01-01

... that failure of any lifting device under excessive load would not impair the ability of the package to... its yield strength, a static force applied to the center of gravity of the package having a vertical... package must be designed so that failure of the device under excessive load would not impair the ability...

10 CFR 71.45 - Lifting and tie-down standards for all packages.

Code of Federal Regulations, 2013 CFR

2013-01-01

... that failure of any lifting device under excessive load would not impair the ability of the package to... its yield strength, a static force applied to the center of gravity of the package having a vertical... package must be designed so that failure of the device under excessive load would not impair the ability...

10 CFR 71.45 - Lifting and tie-down standards for all packages.

Code of Federal Regulations, 2010 CFR

2010-01-01

... that failure of any lifting device under excessive load would not impair the ability of the package to... its yield strength, a static force applied to the center of gravity of the package having a vertical... package must be designed so that failure of the device under excessive load would not impair the ability...

Smart packaging systems for food applications: a review.

PubMed

Biji, K B; Ravishankar, C N; Mohan, C O; Srinivasa Gopal, T K

2015-10-01

Changes in consumer preference for safe food have led to innovations in packaging technologies. This article reviews about different smart packaging systems and their applications in food packaging, packaging research with latest innovations. Active and intelligent packing are such packaging technologies which offer to deliver safer and quality products. Active packaging refers to the incorporation of additives into the package with the aim of maintaining or extending the product quality and shelf life. The intelligent systems are those that monitor the condition of packaged food to give information regarding the quality of the packaged food during transportation and storage. These technologies are designed to the increasing demand for safer foods with better shelf life. The market for active and intelligent packaging systems is expected to have a promising future by their integration into packaging materials or systems.

Low-cost CWDM transmitter package

NASA Astrophysics Data System (ADS)

Bhandarkar, Navin; Castillega, Jaime

2005-03-01

A low-cost coarse-wavelength-division multiplexer (CWDM) transmitter that combines four channels (wavelengths) in the infrared spectrum (~1310 nm) in a small form-factor un-cooled package is demonstrated. The package utilizes precision molded optics to multiplex beams from four grating-outcoupled surface-emitting (GSE) lasers into a single beam suitable for coupling into multimode fiber. This paper summarizes the optical and opto-mechanical design, fabrication and assembly of prototypes, and optical, thermal and electrical measurement results of the prototypes. This unique design enables multiplexing of wavelengths without the use of filters, waveguides, couplers and fiber splicing. Commercial fabrication and alignment technology is used to manufacture the package, resulting in a more robust, reliable and low-cost transmitter. The transmitter package is enabled by the unique characteristics of the long-wavelength GSE laser.

Composite correlation filter for O-ring detection in stationary colored noise

NASA Astrophysics Data System (ADS)

Hassebrook, Laurence G.

2009-04-01

O-rings are regularly replaced in aircraft and if they are not replaced or if they are installed improperly, they can result in catastrophic failure of the aircraft. It is critical that the o-rings be packaged correctly to avoid mistakes made by technicians during routine maintenance. For this reason, fines may be imposed on the o-ring manufacturer if the o-rings are packaged incorrectly. That is, a single o-ring must be packaged and labeled properly. No o-rings or more than one o-ring per package is not acceptable. We present an industrial inspection system based on real-time composite correlation filtering that has successfully solved this problem in spite of opaque paper o-ring packages. We present the system design including the composite filter design.

49 CFR Appendix A to Subpart D of... - Guidelines for Civil Penalties

Code of Federal Regulations, 2014 CFR

2014-10-01

... transportation in a self-certified packaging that has not been subjected to design qualification testing: 178.601... for transportation that minimally deviates from an approved design in a manner that does not impact... $5,000. 6. Failure to meet one or more of the general design requirements for a package used to ship...

49 CFR Appendix A to Subpart D of... - Guidelines for Civil Penalties

Code of Federal Regulations, 2013 CFR

2013-10-01

... transportation in a self-certified packaging that has not been subjected to design qualification testing: 178.601... for transportation that minimally deviates from an approved design in a manner that does not impact... $5,000. 6. Failure to meet one or more of the general design requirements for a package used to ship...

75 FR 18514 - Developing Guidance on Naming, Labeling, and Packaging Practices to Reduce Medication Errors...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-12

..., layout, use of color, use of graphics, and costs associated with designing labels. Panel 1 will address... from the general public about the design of drug and therapeutic biologic container labels, carton... packaging designs. Among these measures, FDA agreed that by the end of FY 2010, after public consultation...

The SKYTOWER and SKYMOBILE programs for locating and designing skyline harvest units.

Treesearch

R.H. Twito; R.J. McGaughey; S.E. Reutebuch

1988-01-01

PLANS, a software package for integrated timber-harvest planning, uses digital terrain models to provide the topographic data needed to fit harvest and transportation designs to specific terrain. SKYTOWER and SKYMOBILE are integral programs in the PLANS package and are used to design the timber-harvest units for skyline systems. SKYTOWER determines skyline payloads and...

Modular avionics packaging standardization

NASA Astrophysics Data System (ADS)

Austin, M.; McNichols, J. K.

The Modular Avionics Packaging (MAP) Program for packaging future military avionics systems with the objective of improving reliability, maintainability, and supportability, and reducing equipment life cycle costs is addressed. The basic MAP packaging concepts called the Standard Avionics Module, the Standard Enclosure, and the Integrated Rack are summarized, and the benefits of modular avionics packaging, including low risk design, technology independence with common functions, improved maintainability and life cycle costs are discussed. Progress made in MAP is briefly reviewed.

SUBOPT: A CAD program for suboptimal linear regulators

NASA Technical Reports Server (NTRS)

Fleming, P. J.

1985-01-01

An interactive software package which provides design solutions for both standard linear quadratic regulator (LQR) and suboptimal linear regulator problems is described. Intended for time-invariant continuous systems, the package is easily modified to include sampled-data systems. LQR designs are obtained by established techniques while the large class of suboptimal problems containing controller and/or performance index options is solved using a robust gradient minimization technique. Numerical examples demonstrate features of the package and recent developments are described.

Design and installation package for the Sunmat Flat Plate solar collector

NASA Technical Reports Server (NTRS)

1978-01-01

The information used in evaluating the design of a liquid flat plate solar collector is reported. Included in this package are subsystem performance specification, installation, operation and maintenance manuals, collector sizing guides, and detailed drawings of the single-glazed collector.

Integration of safety engineering into a cost optimized development program.

NASA Technical Reports Server (NTRS)

Ball, L. W.

1972-01-01

A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'

Assessment of Urban Aerial Taxi with Cryogenic Components Under Design Environment for Novel Vertical Lift Vehicles (DELIVER)

NASA Technical Reports Server (NTRS)

Snyder, Christopher

2017-01-01

Assessing the potential to bring 100 years of aeronautics knowledge to the entrepreneurs desktop to enable a design environment for emerging vertical lift vehicles is one goal for the NASA's Design Environment for Novel Vertical Lift Vehicles (DELIVER). As part of this effort, a system study was performed using a notional, urban aerial taxi system to better understand vehicle requirements along with the tools and methods capability to assess these vehicles and their subsystems using cryogenic cooled components. The baseline was a vertical take-off and landing (VTOL) aircraft, with all-electric propulsion system assuming 15 year technology performance levels and its capability limited to a pilot with one or two people and cargo. Hydrocarbon-fueled hybrid concepts were developed to improve mission capabilities. The hybrid systems resulted in significant improvements in maximum range and number of on demand mobility (ODM) missions that could be completed before refuel or recharge. An important consideration was thermal management, including the choice for air-cooled or cryogenic cooling using liquid natural gas (LNG) fuel. Cryogenic cooling for critical components can have important implications on component performance and size. Thermal loads were also estimated, subsequent effort will be required to verify feasibility for cooling airflow and packaging. LNG cryogenic cooling of selected components further improved vehicle range and reduced thermal loads, but the same concerns for airflow and packaging still need to be addressed. The use of the NASA Design and Analysis of Rotorcraft (NDARC) tool for vehicle sizing and mission analysis appears to be capable of supporting analyses for present and future types of vehicles, missions, propulsion, and energy sources. Further efforts are required to develop verified models for these new types of propulsion and energy sources in the size and use envisioned for these emerging vehicle and mission classes.

Assessment of Urban Aerial Taxi with Cryogenic Components under Design Environment for Novel Vertical Lift Vehicles (DELIVER)

NASA Technical Reports Server (NTRS)

Snyder, Christopher A.

2017-01-01

Assessing the potential to bring 100 years of aeronautics knowledge to the entrepreneurs desktop to enable a design environment for emerging vertical lift vehicles is one goal for the NASAs Design Environment for Novel Vertical Lift Vehicles (DELIVER). As part of this effort, a system study was performed using a notional, urban aerial taxi system to better understand vehicle requirements along with the tools and methods capability to assess these vehicles and their subsystems using cryogenic cooled components. The baseline was a vertical take-off and landing (VTOL) aircraft, with all-electric propulsion system assuming 15 year technology performance levels and its capability limited to a pilot with one or two people and cargo. Hydrocarbon-fueled hybrid concepts were developed to improve mission capabilities. The hybrid systems resulted in significant improvements in maximum range and number of on demand mobility (ODM) missions that could be completed before refuel or recharge. An important consideration was thermal management, including the choice for air-cooled or cryogenic cooling using liquid natural gas (LNG) fuel. Cryogenic cooling for critical components can have important implications on component performance and size. Thermal loads were also estimated, subsequent effort will be required to verify feasibility for cooling airflow and packaging. LNG cryogenic cooling of selected components further improved vehicle range and reduced thermal loads, but the same concerns for airflow and packaging still need to be addressed. The use of the NASA Design and Analysis of Rotorcraft (NDARC) tool for vehicle sizing and mission analysis appears to be capable of supporting analyses for present and future types of vehicles, missions, propulsion, and energy sources. Further efforts are required to develop verified models for these new types of propulsion and energy sources in the size and use envisioned for these emerging vehicle and mission classes.

Innovative Soft-Sided Waste Packaging System Implementation at a Small Department of Energy Environmental Restoration/Waste Management (ER/WM) Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolf, J.

2002-02-28

Weiss Associates (WA) performs a broad range of environmental restoration/waste management (ER/WM) activities for the U.S. Department of Energy (DOE) at the former Laboratory for Energy-Related Health Research (LEHR), University of California, Davis (UC Davis). Over the last three years, the LEHR ER/WM program transitioned from a baseline packaging system of steel, 2.7 cubic meter (3.5-cubic yard) B-25 boxes to a 7.0 cubic meter (9.1-cubic yard) soft-sided container (Lift Liner) system. The transition increased efficiencies in processing, packaging, and storage, and when combined with decreased procurement costs, achieved a $402,000 cost savings (Table I). Additional disposal costs between $128,600 andmore » $182,600 were avoided by minimizing void space. Future cost savings by the end of fiscal year 2003 are projected between $250,640 and $1,003,360.« less

Design and Development of a Package for a Diluted Waveguide Electro-Absorption Modulator

DTIC Science & Technology

2008-11-01

the coupling efficiency. A design including mechanical, optical and RF elements was developed. A Newport Laser Welding system was utilized for...results, a design including mechanical, optical and RF elements was developed. A Newport Laser Welding system was utilized for fiber placement and...fixation. The laser welding techniques were customized in order to meet the needs of the EAM package design. Keywords: Electroabsorption

Trial of a Novel Intervention to Improve Multiple Food Hygiene Behaviors in Nepal

PubMed Central

Gautam, Om Prasad; Schmidt, Wolf-Peter; Cairncross, Sandy; Cavill, Sue; Curtis, Valerie

2017-01-01

In this study, we report on the results of a trial of an intervention to improve five food hygiene behaviors among mothers of young children in rural Nepal. This novel intervention targeted five behaviors; cleanliness of serving utensils, handwashing with soap before feeding, proper storage of cooked food, and thorough reheating and water treatment. Based on formative research and a creative process using the Behavior-Centered Design approach, an innovative intervention package was designed and delivered over a period of 3 months. The intervention activities included local rallies, games, rewards, storytelling, drama, competitions linking with emotional drivers of behavior, and “kitchen makeovers” to disrupt behavior settings. The effect of the package on behavior was evaluated via a cluster-randomized before–after study in four villages with four villages serving as controls. The primary outcome was the difference in the mean cluster level proportions of mothers directly observed practicing all five food hygiene behaviors. The five targeted food hygiene behaviors were rare at baseline (composite performance of all five behaviors in intervention 1% [standard deviation (SD) = 2%] and in control groups 2% [SD = 2%]). Six weeks after the intervention, the target behaviors were more common in the intervention than in the control group (43% [SD = 14%] versus 2% [SD = 2%], P = 0.02) during follow-up. The intervention appeared to be equally effective in improving all five behaviors in all intervention clusters. This study shows that a theory-driven, systematic approach employing emotional motivators and modifying behavior settings was capable of substantially improving multiple food hygiene behaviors in Nepal. PMID:28719285

Trial of a Novel Intervention to Improve Multiple Food Hygiene Behaviors in Nepal.

PubMed

Gautam, Om Prasad; Schmidt, Wolf-Peter; Cairncross, Sandy; Cavill, Sue; Curtis, Valerie

2017-06-01

AbstractIn this study, we report on the results of a trial of an intervention to improve five food hygiene behaviors among mothers of young children in rural Nepal. This novel intervention targeted five behaviors; cleanliness of serving utensils, handwashing with soap before feeding, proper storage of cooked food, and thorough reheating and water treatment. Based on formative research and a creative process using the Behavior-Centered Design approach, an innovative intervention package was designed and delivered over a period of 3 months. The intervention activities included local rallies, games, rewards, storytelling, drama, competitions linking with emotional drivers of behavior, and "kitchen makeovers" to disrupt behavior settings. The effect of the package on behavior was evaluated via a cluster-randomized before-after study in four villages with four villages serving as controls. The primary outcome was the difference in the mean cluster level proportions of mothers directly observed practicing all five food hygiene behaviors. The five targeted food hygiene behaviors were rare at baseline (composite performance of all five behaviors in intervention 1% [standard deviation (SD) = 2%] and in control groups 2% [SD = 2%]). Six weeks after the intervention, the target behaviors were more common in the intervention than in the control group (43% [SD = 14%] versus 2% [SD = 2%], P = 0.02) during follow-up. The intervention appeared to be equally effective in improving all five behaviors in all intervention clusters. This study shows that a theory-driven, systematic approach employing emotional motivators and modifying behavior settings was capable of substantially improving multiple food hygiene behaviors in Nepal.

Design of an interactive digital nutritional education package for elderly people.

PubMed

Ali, Nazlena Mohamad; Shahar, Suzana; Kee, You Lee; Norizan, Azir Rezha; Noah, Shahrul Azman Mohd

2012-12-01

Designing a system for the elderly is crucial, as aging is associated with physiological changes that may impair perception, cognition and other social aspects; therefore, many aspects need consideration, especially in interface design. This study was conducted to develop a digital nutritional education package (WE Sihat) by following appropriate guidelines for elderly people to achieve better design interface and interaction. Touch-screen technology was used as a platform for user interaction. The nutritional content was based on previous nutrition studies and a lifestyle education package on healthy aging, which contains four modules. The questionnaires were distributed to 31 Malay subjects aged 60-76 years old, containing an evaluation about the overall content, graphics, design layout, colour, font size, audio/video, user-perceived satisfaction and acceptance levels. The findings showed positive feedback and acceptance. Most subjects agreed that the digital nutritional education package can increase their nutritional knowledge for a healthy lifestyle and is easy to use. The touch-screen technology was also well accepted by elderly people and can be used as a kiosk for disseminating nutrition education for healthy aging.

Packaging Technologies for High Temperature Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

2013-01-01

This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500 C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550 C. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500 C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500 C are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

Packaging Technologies for High Temperature Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

2013-01-01

This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

Consumers' physiological and verbal responses towards product packages: Could these responses anticipate product choices?

PubMed

Vila-López, Natalia; Küster-Boluda, Inés

2018-03-03

Today, it is a priority to predict what consumers will choose at the point of sale where there are more and more competing brands. But what kind of consumers' information can be used for that purpose? This paper compares the power of physiological responses (unconscious responses) and self-report/verbal responses (conscious responses) towards product packages, as a means of predicting product choices. To this end, six different packaging designs were created by combining three different colors (blue, red and black) and two different messages (simple and reinforced). Eighty-three young consumers were exposed to each of the six designs. In one phase of our investigation, unconscious electrodermal activity (EDA) for each participant and each packaging type was recorded. In another phase, conscious verbal opinions for each packaging type were collected in a questionnaire. Our results show that the blue packaging with a reinforced message was most often selected. For this packaging consumers' electrodermal values (unconscious responses) were lower, and verbal opinions (conscious responses) were higher. Thus, both data sets could be used to anticipate product choice. However, for the other five packages, only unconscious responses were related to product choices. In contrast, higher opinions in a questionnaire did not correspond to selection of packages. Copyright © 2018. Published by Elsevier Inc.

75 FR 34156 - United States

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... the package's failure. A failure of the package could expose the medical device to microbes, bacteria... research and development efforts, including, but not limited to, designs and experiments and the results of successful and unsuccessful designs and experiments; and (b) With respect to any intangible assets that are...

Body of Knowledge (BOK) for Leadless Quad Flat No-Lead/bottom Termination Components (QFN/BTC) Package Trends and Reliability

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2014-01-01

Bottom terminated components and quad flat no-lead (BTC/QFN) packages have been extensively used by commercial industry for more than a decade. Cost and performance advantages and the closeness of the packages to the boards make them especially unique for radio frequency (RF) applications. A number of high-reliability parts are now available in this style of package configuration. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the status of BTC/QFN and their advanced versions of multi-row QFN (MRQFN) packaging technologies. The report provides a comprehensive review of packaging trends and specifications on design, assembly, and reliability. Emphasis is placed on assembly reliability and associated key design and process parameters because they show lower life than standard leaded package assembly under thermal cycling exposures. Inspection of hidden solder joints for assuring quality is challenging and is similar to ball grid arrays (BGAs). Understanding the key BTC/QFN technology trends, applications, processing parameters, workmanship defects, and reliability behavior is important when judicially selecting and narrowing the follow-on packages for evaluation and testing, as well as for the low risk insertion in high-reliability applications.

Body of Knowledge (BOK) for Leadless Quad Flat No-Lead/Bottom Termination Components (QFN/BTC) Package Trends and Reliability

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2014-01-01

Bottom terminated components and quad flat no-lead (BTC/QFN) packages have been extensively used by commercial industry for more than a decade. Cost and performance advantages and the closeness of the packages to the boards make them especially unique for radio frequency (RF) applications. A number of high-reliability parts are now available in this style of package configuration. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the status of BTC/QFN and their advanced versions of multi-row QFN (MRQFN) packaging technologies. The report provides a comprehensive review of packaging trends and specifications on design, assembly, and reliability. Emphasis is placed on assembly reliability and associated key design and process parameters because they show lower life than standard leaded package assembly under thermal cycling exposures. Inspection of hidden solder joints for assuring quality is challenging and is similar to ball grid arrays (BGAs). Understanding the key BTC/QFN technology trends, applications, processing parameters, workmanship defects, and reliability behavior is important when judicially selecting and narrowing the follow-on packages for evaluation and testing, as well as for the low risk insertion in high-reliability applications.

Packaging Concerns and Techniques for Large Devices: Challenges for Complex Electronics

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

NASA is going to have to accept the use of non-hermetic packages for complex devices. There are a large number of packaging options available. Space application subjects the packages to stresses that they were probably not designed for (vacuum for instance). NASA has to find a way of having assurance in the integrity of the packages. There are manufacturers interested in qualifying non-hermetic packages to MIL-PRF-38535 Class V. Government space users are agreed that Class V should be for hermetic packages only. NASA is working on a new Class for non-hermetic packages for M38535 Appendix B, "Class Y". Testing for package integrity will be required but can be package specific as described by a Package Integrity Test Plan. The plan is developed by the manufacturer and approved by DSCC and government space.

Baseline study and risk analysis of landfill leachate - Current state-of-the-science of computer aided approaches.

PubMed

Butt, T E; Alam, A; Gouda, H M; Paul, P; Mair, N

2017-02-15

For the successful completion of a risk analysis process, its foundation (i.e. a baseline study) has to be well established. For this purpose, a baseline study needs to be more integrated than ever, particularly when environmental legislation is increasingly becoming stringent and integrated. This research investigates and concludes that no clear evidence of computer models for baseline study has been found in a whole-system and integrated format, which risk assessors could readily and effectively use to underpin risk analyses holistically and yet specifically for landfill leachate. This is established on the basis of investigation of software packages that are particularly closely related to landfills. Holistic baseline study is also defined along with its implications and in the context of risk assessment of landfill leachate. The study also indicates a number of factors and features that need to be added to baseline study in order to render it more integrated thereby enhancing risk analyses for landfill leachate. Copyright © 2016 Elsevier B.V. All rights reserved.

9 CFR 381.144 - Packaging materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., from the packaging supplier under whose brand name and firm name the material is marketed to the... distinguishing brand name or code designation appearing on the packaging material shipping container; must....13) will be acceptable. The management of the establishment must maintain a file containing...

Wrap-Attack Pack: Product Packaging Exercise

ERIC Educational Resources Information Center

Lee, Seung Hwan; Hoffman, K. Douglas

2016-01-01

Although many marketing courses discuss traditional concepts pertaining to product strategy, concepts specifically relating to packaging are often glossed over. This exercise, "Wrap-Attack Pack," teaches students about the utilitarian and hedonic design elements of packaging. More specifically, the primary objective is to creatively…

49 CFR Appendix A to Subpart D of... - Guidelines for Civil Penalties

Code of Federal Regulations, 2011 CFR

2011-10-01

... to design qualification testing: 178.601 & Various a. Packing Group I (and § 172.504 Table I... $4,000. 6. Failure to meet one or more of the general design requirements for a package used to ship... the additional design requirements of a Type A package used to ship a Class 7 material 173.412(b)-(i...

49 CFR Appendix A to Subpart D of... - Guidelines for Civil Penalties

Code of Federal Regulations, 2012 CFR

2012-10-01

... to design qualification testing: 178.601 & Various a. Packing Group I (and § 172.504 Table I... $4,000. 6. Failure to meet one or more of the general design requirements for a package used to ship... the additional design requirements of a Type A package used to ship a Class 7 material 173.412(b)-(i...

49 CFR Appendix A to Subpart D of... - Guidelines for Civil Penalties

Code of Federal Regulations, 2010 CFR

2010-10-01

... to design qualification testing: 178.601 & Various a. Packing Group I (and § 172.504 Table I... $4,000. 6. Failure to meet one or more of the general design requirements for a package used to ship... the additional design requirements of a Type A package used to ship a Class 7 material 173.412(b)-(i...

Deep Borehole Field Test Requirements and Controlled Assumptions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest

2015-07-01

This document presents design requirements and controlled assumptions intended for use in the engineering development and testing of: 1) prototype packages for radioactive waste disposal in deep boreholes; 2) a waste package surface handling system; and 3) a subsurface system for emplacing and retrieving packages in deep boreholes. Engineering development and testing is being performed as part of the Deep Borehole Field Test (DBFT; SNL 2014a). This document presents parallel sets of requirements for a waste disposal system and for the DBFT, showing the close relationship. In addition to design, it will also inform planning for drilling, construction, and scientificmore » characterization activities for the DBFT. The information presented here follows typical preparations for engineering design. It includes functional and operating requirements for handling and emplacement/retrieval equipment, waste package design and emplacement requirements, borehole construction requirements, sealing requirements, and performance criteria. Assumptions are included where they could impact engineering design. Design solutions are avoided in the requirements discussion. Deep Borehole Field Test Requirements and Controlled Assumptions July 21, 2015 iv ACKNOWLEDGEMENTS This set of requirements and assumptions has benefited greatly from reviews by Gordon Appel, Geoff Freeze, Kris Kuhlman, Bob MacKinnon, Steve Pye, David Sassani, Dave Sevougian, and Jiann Su.« less

Introduction and evaluation of a ‘pre-ART care’ service in Swaziland: an operational research study

PubMed Central

Burtle, David; Elden, Susan; Mamvura, Canaan; Vandelanotte, Joris; Petherick, Emily; Walley, John; Wright, John

2012-01-01

Objective To implement and evaluate a formal pre-antiretroviral therapy (ART) care service at a district hospital in Swaziland. Design Operational research. Setting District hospital in Southern Africa. Participants 1171 patients with a previous diagnosis of HIV. A baseline patient group consisted of the first 200 patients using the service. Two follow-up groups were defined: group 1 was all patients recruited from April to June 2009 and group 2 was 200 patients recruited in February 2010. Intervention Introduction of pre-ART care—a package of interventions, including counselling; regular review; clinical staging; timely initiation of ART; social and psychological support; and prevention and management of opportunistic infections, such as tuberculosis. Primary and secondary outcome measures Proportion of patients assessed for ART eligibility, proportion of eligible patients who were started on ART and proportion receiving defined evidence-based interventions (including prophylactic co-trimoxazole and tuberculosis screening). Results Following the implementation of the pre-ART service, the proportion of patients receiving defined interventions increased; the proportion of patient being assessed for ART eligibility significantly increased (baseline: 59%, group 1: 64%, group 2: 76%; p=0.001); the proportion of ART-eligible patients starting treatment increased (baseline: 53%, group 1: 81%, group: 2, 81%; p<0.001) and the median time between patients being declared eligible for ART and initiation of treatment significantly decreased (baseline: 61 days, group 1: 39 days, group 2: 14 days; p<0.001). Conclusions This intervention was part of a shift in the model of care from a fragmented acute care model to a more comprehensive service. The introduction of structured pre-ART was associated with significant improvements in the assessment, management and timeliness of initiation of treatment for patients with HIV. PMID:22422913

Characterization of fission gas bubbles in irradiated U-10Mo fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casella, Andrew M.; Burkes, Douglas E.; MacFarlan, Paul J.

2017-09-01

Irradiated U-10Mo fuel samples were prepared with traditional mechanical potting and polishing methods with in a hot cell. They were then removed and imaged with an SEM located outside of a hot cell. The images were then processed with basic imaging techniques from 3 separate software packages. The results were compared and a baseline method for characterization of fission gas bubbles in the samples is proposed. It is hoped that through adoption of or comparison to this baseline method that sample characterization can be somewhat standardized across the field of post irradiated examination of metal fuels.

Solar Water-Heater Design Package

NASA Technical Reports Server (NTRS)

1982-01-01

Information on a solar domestic-hot water heater is contained in 146 page design package. System consists of solar collector, storage tanks, automatic control circuitry and auxiliary heater. Data-acquisition equipment at sites monitors day-by-day performance. Includes performance specifications, schematics, solar-collector drawings and drawings of control parts.

20 CFR 633.307 - Packages of benefits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Packages of benefits. 633.307 Section 633.307 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR MIGRANT AND SEASONAL FARMWORKER PROGRAMS Program Design and Administrative Procedures § 633.307 Packages of benefits. (a) Where...

Large space telescope, phase A. Volume 4: Scientific instrument package

NASA Technical Reports Server (NTRS)

1972-01-01

The design and characteristics of the scientific instrument package for the Large Space Telescope are discussed. The subjects include: (1) general scientific objectives, (2) package system analysis, (3) scientific instrumentation, (4) imaging photoelectric sensors, (5) environmental considerations, and (6) reliability and maintainability.

10 CFR 71.71 - Normal conditions of transport.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Package... each package design under normal conditions of transport must include a determination of the effect on... following table: Insolation Data Form and location of surface Total insolation for a 12-hour period(g cal...

10 CFR 71.71 - Normal conditions of transport.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Package... each package design under normal conditions of transport must include a determination of the effect on... following table: Insolation Data Form and location of surface Total insolation for a 12-hour period(g cal...

10 CFR 71.71 - Normal conditions of transport.

Code of Federal Regulations, 2011 CFR

2011-01-01

... NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Package... each package design under normal conditions of transport must include a determination of the effect on... following table: Insolation Data Form and location of surface Total insolation for a 12-hour period(g cal...

10 CFR 71.71 - Normal conditions of transport.

Code of Federal Regulations, 2010 CFR

2010-01-01

... NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Package... each package design under normal conditions of transport must include a determination of the effect on... following table: Insolation Data Form and location of surface Total insolation for a 12-hour period(g cal...

10 CFR 71.71 - Normal conditions of transport.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Package... each package design under normal conditions of transport must include a determination of the effect on... following table: Insolation Data Form and location of surface Total insolation for a 12-hour period(g cal...

Aviation Design Software

NASA Technical Reports Server (NTRS)

1997-01-01

DARcorporation developed a General Aviation CAD package through a Small Business Innovation Research contract from Langley Research Center. This affordable, user-friendly preliminary design system for General Aviation aircraft runs on the popular 486 IBM-compatible personal computers. Individuals taking the home-built approach, small manufacturers of General Aviation airplanes, as well as students and others interested in the analysis and design of aircraft are possible users of the package. The software can cut design and development time in half.

Design and performance of an arcjet nuclear electric propulsion system for a mid-1990's reference mission

NASA Technical Reports Server (NTRS)

Deininger, William D.; Vondra, Robert J.

1987-01-01

The design and performance of an arcjet nuclear-electric-propulsion spacecraft, suitable for use in the Space Nuclear Power System (SNPS) reference mission, are outlined. The vehicle design was based on a 30-kW ammonia arcjet system operating at an Isp of 1050 s and an efficiency of 45 percent. The arcjet/gimbal system, power-processing unit, and propellant-feed system are described. A 100-kWe SNPS was assumed, and the spacecraft mass was baselined at 5250 kg (excluding the propellant-feed system). A radiation/arcjet efflux diagnostics package was included in the performance analysis. This spacecraft, assuming a Shuttle launch from KSC, can perform a 50-deg inclination change and reach a final orbit of 35,860 km with a 120-d trip time providing a 4-mo active load for the SNPS. Alternatively, a Titan IV launch would provide a mass margin of 120 kg to a 10,000-km, 58-deg final orbit in 74 d. This spacecraft meets the reference-mission constraint of low developmental risk, and is scalable to power levels projected for future space platforms.

A High Power Density Power System Electronics for NASA's Lunar Reconnaissance Orbiter

NASA Technical Reports Server (NTRS)

Hernandez-Pellerano, A.; Stone, R.; Travis, J.; Kercheval, B.; Alkire, G.; Ter-Minassian, V.

2009-01-01

A high power density, modular and state-of-the-art Power System Electronics (PSE) has been developed for the Lunar Reconnaissance Orbiter (LRO) mission. This paper addresses the hardware architecture and performance, the power handling capabilities, and the fabrication technology. The PSE was developed by NASA s Goddard Space Flight Center (GSFC) and is the central location for power handling and distribution of the LRO spacecraft. The PSE packaging design manages and distributes 2200W of solar array input power in a volume less than a cubic foot. The PSE architecture incorporates reliable standard internal and external communication buses, solid state circuit breakers and LiIon battery charge management. Although a single string design, the PSE achieves high reliability by elegantly implementing functional redundancy and internal fault detection and correction. The PSE has been environmentally tested and delivered to the LRO spacecraft for the flight Integration and Test. This modular design is scheduled to flight in early 2009 on board the LRO and Lunar Crater Observation and Sensing Satellite (LCROSS) spacecrafts and is the baseline architecture for future NASA missions such as Global Precipitation Measurement (GPM) and Magnetospheric MultiScale (MMS).

Compact sources for eyesafe illumination

NASA Astrophysics Data System (ADS)

Baranova, Nadia; Pu, Rui; Stebbins, Kenneth; Bystryak, Ilya; Rayno, Michael; Ezzo, Kevin; DePriest, Christopher

2018-02-01

Q-peak has demonstrated a compact, pulsed eyesafe laser architecture operating with >10 mJ pulse energies at repetition rates as high as 160 Hz. The design leverages an end-pumped solid-state laser geometry to produce adequate eyesafe beam quality (M2˜4), while also providing a path toward higher-density laser architectures for pulsed eyesafe applications. The baseline discussed in this paper has shown a unique capability for high-pulse repetition rates in a compact package, and offers additional potential for power scaling based on birefringence compensation. The laser consists of an actively Q-switched oscillator cavity producing pulse widths <30 ns, and utilizing an end-pumped Nd:YAG gain medium with a rubidium titanyl phosphate electro-optical crystal. The oscillator provides an effective front-end-seed for an optical parametric oscillator (OPO), which utilizes potassium titanyl arsenate in a linear OPO geometry. This laser efficiently operates in the eyesafe band, and has been designed to fit within a volume of 3760 cm3. We will discuss details of the optical system design, modeled thermal effects and stress-induced birefringence, as well as experimental advantages of the end-pumped laser geometry, along with proposed paths to higher eyesafe pulse energies.

Compact sources for eyesafe illumination

NASA Astrophysics Data System (ADS)

Baranova, N.; Pu, R.; Stebbins, K.; Bystryak, I.; Rayno, M.; Ezzo, K.; DePriest, C.

2017-02-01

Q-Peak has demonstrated a novel, compact, pulsed eyesafe laser architecture operating with <10 mJ pulse energies at repetition rates as high as 160 Hz. The design leverages an end-pumped solid-state laser geometry to produce adequate eyesafe beam quality (M2 4), while also providing a path towards higher-density laser architectures for pulsed eyesafe applications. The baseline discussed in this paper has shown a unique capability for high pulse repetition rates in a compact package, and offers additional potential for power scaling based on birefringence compensation. The laser consists of an actively Q-switched oscillator cavity producing pulse-widths <30 ns, and utilizing an end-pumped Nd: YAG gain medium with a Rubidium Titanyl Phosphate (RTP) electro-optical crystal. The oscillator provides an effective front-end-seed for an optical parametric oscillator (OPO), which utilizes Potassium Titanyl Arsenate (KTA) in a linear OPO geometry. This laser efficiently operates in the eyesafe band, and has been designed to fit within a volume of 3760 cm3. We will discuss details of the optical system design, modeled thermal effects and stress-induced birefringence, as well as experimental advantages of the end-pumped laser geometry, along with proposed paths to higher eyesafe pulse energies.

Packaging printed circuit boards: A production application of interactive graphics

NASA Technical Reports Server (NTRS)

Perrill, W. A.

1975-01-01

The structure and use of an Interactive Graphics Packaging Program (IGPP), conceived to apply computer graphics to the design of packaging electronic circuits onto printed circuit boards (PCB), were described. The intent was to combine the data storage and manipulative power of the computer with the imaginative, intuitive power of a human designer. The hardware includes a CDC 6400 computer and two CDC 777 terminals with CRT screens, light pens, and keyboards. The program is written in FORTRAN 4 extended with the exception of a few functions coded in COMPASS (assembly language). The IGPP performs four major functions for the designer: (1) data input and display, (2) component placement (automatic or manual), (3) conductor path routing (automatic or manual), and (4) data output. The most complex PCB packaged to date measured 16.5 cm by 19 cm and contained 380 components, two layers of ground planes and four layers of conductors mixed with ground planes.

Structural testing of the Los Alamos National Laboratory Heat Source/Radioisotopic Thermoelectric Generator shipping container

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bronowski, D.R.; Madsen, M.M.

The Heat Source/Radioisotopic Thermoelectric Generator shipping container is a Type B packaging design currently under development by Los Alamos National Laboratory. Type B packaging for transporting radioactive material is required to maintain containment and shielding after being exposed to the normal and hypothetical accident environments defined in Title 10 Code of Federal Regulations Part 71. A combination of testing and analysis is used to verify the adequacy of this package design. This report documents the test program portion of the design verification, using several prototype packages. Four types of testing were performed: 30-foot hypothetical accident condition drop tests in threemore » orientations, 40-inch hypothetical accident condition puncture tests in five orientations, a 21 psi external overpressure test, and a normal conditions of transport test consisting of a water spray and a 4 foot drop test. 18 refs., 104 figs., 13 tabs.« less

A Compact, Soft-Switching DC-DC Converter for Electric Propulsion

NASA Technical Reports Server (NTRS)

Button, Robert; Redilla, Jack; Ayyanar, Raja

2003-01-01

A hybrid, soft-switching, DC-DC converter has been developed with superior soft switching characteristics, high efficiency, and low electro-magnetic interference. This hybrid topology is comprised of an uncontrolled bridge operating at full pulse-width, and a controlled section operating as a conventional phase modulated converter. The unique topology is able to maintain zero voltage switching down to no load operating conditions. A breadboard prototype was developed and tested to demonstrate the benefits of the topology. Improvements were then made to reduce the size of passive components and increase efficiency in preparation for packaging. A packaged prototype was then designed and built, and several innovative packaging techniques are presented. Performance test data is presented that reveals deficiencies in the design of the power transformer. A simple redesign of the transformer windings eliminated the deficiency. Future plans to improve the converter and packaging design are presented along with several conclusions.

An R package for the design, analysis and operation of reservoir systems

NASA Astrophysics Data System (ADS)

Turner, Sean; Ng, Jia Yi; Galelli, Stefano

2016-04-01

We present a new R package - named "reservoir" - which has been designed for rapid and easy routing of runoff through storage. The package comprises well-established tools for capacity design (e.g., the sequent peak algorithm), performance analysis (storage-yield-reliability and reliability-resilience-vulnerability analysis) and release policy optimization (Stochastic Dynamic Programming). Operating rules can be optimized for water supply, flood control and amenity objectives, as well as for maximum hydropower production. Storage-depth-area relationships are in-built, allowing users to incorporate evaporation from the reservoir surface. We demonstrate the capabilities of the software for global studies using thousands of reservoirs from the Global Reservoir and Dam (GRanD) database fed by historical monthly inflow time series from a 0.5 degree gridded global runoff dataset. The package is freely available through the Comprehensive R Archive Network (CRAN).

A New Assessment Tool. A Professional Development Kit for Trainers and Assessors Incorporating Language, Literacy and Numeracy Skills into Training Packages.

ERIC Educational Resources Information Center

Goulbourn, Barbara; Alexander, Ann

This kit is designed to help trainers and assessors understand the importance of workplace communication in training packages. Section 1 explains what trainers and assessors need to know about communication skills, and how to use the kit. Section 2 provides an overview of training packages. It describes the endorsed parts of the package, which…

EVALUATION OF A MUSCULOSKELETAL TRAINING PACKAGE FOR OCCUPATIONAL HEALTH PRACTITIONERS

PubMed Central

Madan, Ira; Walker-Bone, Karen

2016-01-01

Background Musculoskeletal disorders (MSDs) are a common cause of disability in the workplace. Despite this there is known to be a wide variation in the assessment of MSDs by UK occupational health (OH) professionals. Therefore we developed a workshop, supported by a bespoke, on-line video, focussing on the assessment and management of MSDs. Aims To assess the impact of the training package on the knowledge, confidence and reported behaviour of attendees. Methods Workshops were held in two regional centres in England. Delegates completed a questionnaire on arrival to establish their baseline knowledge and confidence and again at the end of the training. A third questionnaire, with one reminder, was emailed to delegates four months following the workshops. Results 92 OH professionals (77 nurses, 10 doctors and 5 ‘others’) attended and more than 80% reported that they had no previous training in examining the upper or lower limb or in distinguishing specific from non-specific MSDs. Confidence among delegates in examination, diagnosis and management of MSDs improved after the workshop and these changes were sustained and remained statistically significant from baseline four months afterwards. Following the training, 79% (50) of delegates reported that they had shared the knowledge and skills acquired with their colleagues and 71% reported that they had used the examination techniques in their day-to-day practice. Conclusion We have developed a training package which resulted in improved knowledge among attendees and gave them confidence to use their skills in practice. PMID:24213093

Application of the AMBUR R package for spatio-temporal analysis of shoreline change: Jekyll Island, Georgia, USA

NASA Astrophysics Data System (ADS)

Jackson, Chester W.; Alexander, Clark R.; Bush, David M.

2012-04-01

The AMBUR (Analyzing Moving Boundaries Using R) package for the R software environment provides a collection of functions for assisting with analyzing and visualizing historical shoreline change. The package allows import and export of geospatial data in ESRI shapefile format, which is compatible with most commercial and open-source GIS software. The "baseline and transect" method is the primary technique used to quantify distances and rates of shoreline movement, and to detect classification changes across time. Along with the traditional "perpendicular" transect method, two new transect methods, "near" and "filtered," assist with quantifying changes along curved shorelines that are problematic for perpendicular transect methods. Output from the analyses includes data tables, graphics, and geospatial data, which are useful in rapidly assessing trends and potential errors in the dataset. A forecasting function also allows the user to estimate the future location of the shoreline and store the results in a shapefile. Other utilities and tools provided in the package assist with preparing and manipulating geospatial data, error checking, and generating supporting graphics and shapefiles. The package can be customized to perform additional statistical, graphical, and geospatial functions, and, it is capable of analyzing the movement of any boundary (e.g., shorelines, glacier terminus, fire edge, and marine and terrestrial ecozones).

Combination HIV prevention among MSM in South Africa: results from agent-based modeling.

PubMed

Brookmeyer, Ron; Boren, David; Baral, Stefan D; Bekker, Linda-Gail; Phaswana-Mafuya, Nancy; Beyrer, Chris; Sullivan, Patrick S

2014-01-01

HIV prevention trials have demonstrated the effectiveness of a number of behavioral and biomedical interventions. HIV prevention packages are combinations of interventions and offer potential to significantly increase the effectiveness of any single intervention. Estimates of the effectiveness of prevention packages are important for guiding the development of prevention strategies and for characterizing effect sizes before embarking on large scale trials. Unfortunately, most research to date has focused on testing single interventions rather than HIV prevention packages. Here we report the results from agent-based modeling of the effectiveness of HIV prevention packages for men who have sex with men (MSM) in South Africa. We consider packages consisting of four components: antiretroviral therapy for HIV infected persons with CD4 count <350; PrEP for high risk uninfected persons; behavioral interventions to reduce rates of unprotected anal intercourse (UAI); and campaigns to increase HIV testing. We considered 163 HIV prevention packages corresponding to different intensity levels of the four components. We performed 2252 simulation runs of our agent-based model to evaluate those packages. We found that a four component package consisting of a 15% reduction in the rate of UAI, 50% PrEP coverage of high risk uninfected persons, 50% reduction in persons who never test for HIV, and 50% ART coverage over and above persons already receiving ART at baseline, could prevent 33.9% of infections over 5 years (95% confidence interval, 31.5, 36.3). The package components with the largest incremental prevention effects were UAI reduction and PrEP coverage. The impact of increased HIV testing was magnified in the presence of PrEP. We find that HIV prevention packages that include both behavioral and biomedical components can in combination prevent significant numbers of infections with levels of coverage, acceptance and adherence that are potentially achievable among MSM in South Africa.

Numerical model of solar dynamic radiator for parametric analysis

NASA Technical Reports Server (NTRS)

Rhatigan, Jennifer L.

1989-01-01

Growth power requirements for Space Station Freedom will be met through addition of 25 kW solar dynamic (SD) power modules. The SD module rejects waste heat from the power conversion cycle to space through a pumped-loop, multi-panel, deployable radiator. The baseline radiator configuration was defined during the Space Station conceptual design phase and is a function of the state point and heat rejection requirements of the power conversion unit. Requirements determined by the overall station design such as mass, system redundancy, micrometeoroid and space debris impact survivability, launch packaging, costs, and thermal and structural interaction with other station components have also been design drivers for the radiator configuration. Extensive thermal and power cycle modeling capabilities have been developed which are powerful tools in Station design and analysis, but which prove cumbersome and costly for simple component preliminary design studies. In order to aid in refining the SD radiator to the mature design stage, a simple and flexible numerical model was developed. The model simulates heat transfer and fluid flow performance of the radiator and calculates area mass and impact survivability for many combinations of flow tube and panel configurations, fluid and material properties, and environmental and cycle variations. A brief description and discussion of the numerical model, it's capabilities and limitations, and results of the parametric studies performed is presented.

SPod Progress Summary Slides | Science Inventory | US EPA

EPA Pesticide Factsheets

This presentation describes the draft “open source” design package for the SPod fenceline sensor. The SPod is a low cost, solar-powered system that combines wind field and air pollutant concentration measurements to detect emission plumes and help locate the source of emissions. The current design works only in “near-fenceline” applications where localized source emission plumes may be present. The SPod uses data analysis software (described elsewhere) to separate baseline drift from the plume signal of interest. This software is necessary for proper operation of the SPod. Because the SPod is designed to detect source emissions plumes, it is not useful for ambient applications large distances away from sources. The current SPod detects a subset of air pollutants that can be ionized with a 10.6 eV photoionization detector (PID). In the future, other air pollutant sensors may be used. The purpose of this presentation and related postings is to advance design concepts in the low-cost fenceline sensor area with any interested parties. The SPod is a work in progress with continued advances incorporated on an ongoing basis. This document is posted on an EPA share drive along with other information that describes the use operation and limitations of the SPod. These slides summarize the SPod design, purpose, and progress as of June, 2016. These slides will be posted on the EPA SPod Share Site along with design information and other materials that communicat

Macromodels of digital integrated circuits for program packages of circuit engineering design

NASA Astrophysics Data System (ADS)

Petrenko, A. I.; Sliusar, P. B.; Timchenko, A. P.

1984-04-01

Various aspects of the generation of macromodels of digital integrated circuits are examined, and their effective application in program packages of circuit engineering design is considered. Three levels of macromodels are identified, and the application of such models to the simulation of circuit outputs is discussed.

21 CFR 101.2 - Information panel of package form food.

Code of Federal Regulations, 2010 CFR

2010-04-01

... identity. (2) Individual serving-size packages of food served with meals in restaurants, institutions, and...), any vignettes, designs, and other nonmandatory label information shall not be considered. If there is... designed to serve as a principal display panel, shall be exempt from the placement requirements of this...

Design and fabrication of a foldable 3D silicon based package for solid state lighting applications

NASA Astrophysics Data System (ADS)

Sokolovskij, R.; Liu, P.; van Zeijl, H. W.; Mimoun, B.; Zhang, G. Q.

2015-05-01

Miniaturization of solid state lighting (SSL) luminaires as well as reduction of packaging and assembly costs are of prime interest for the SSL lighting industry. A novel silicon based LED package for lighting applications is presented in this paper. The proposed design consists of 5 rigid Si tiles connected by flexible polyimide hinges with embedded interconnects (ICs). Electrical, optical and thermal characteristics were taken into consideration during design. The fabrication process involved polyimide (PI) application and patterning, aluminium interconnect integration in the flexible hinge, LED reflector cavity formation and metalization followed by through wafer DRIE etching for chip formation and release. A method to connect chip front to backside without TSVs was also integrated into the process. Post-fabrication wafer level assembly included LED mounting and wirebond, phosphor-based colour conversion and silicone encapsulation. The package formation was finalized by vacuum assisted wrapping around an assembly structure to form a 3D geometry, which is beneficial for omnidirectional lighting. Bending tests were performed on the flexible ICs and optical performance at different temperatures was evaluated. It is suggested that 3D packages can be expanded to platforms for miniaturized luminaire applications by combining monolithic silicon integration and system-in-package (SiP) technologies.

Laboratory Connections: Review of Two Commercial Interfacing Packages.

ERIC Educational Resources Information Center

Powers, Michael H.

1989-01-01

Evaluates two Apple II interfacing packages designed to measure pH: (1) "Experiments in Chemistry" by HRM Software and (2) "Voltage Plotter III" by Vernier Software. Provides characteristics and screen dumps of each package. Reports both systems are suitable for high school or beginning college laboratories. (MVL)

Food companies' calorie-reduction pledges to improve U.S. diet.

PubMed

Slining, Meghan M; Ng, Shu Wen; Popkin, Barry M

2013-02-01

Heretofore, corporate voluntary pledges to improve the health of Americans have been linked neither to explicit measurable commitments nor to a framework for an independent evaluation. The Healthy Weight Commitment Foundation (HWCF), whose members include 16 of the nation's leading consumer packaged goods food and beverage manufacturers, voluntarily pledged to collectively remove 1 trillion calories from their products by 2012 (against a 2007 baseline), and 1.5 trillion calories by 2015. The pledge is designed to reduce the calorie gap commensurate with the HWCF companies' role in the U.S. diet. To date, no system exists for documenting the nutritional and public health impacts of industry-led changes in the food supply on individual diets. The current study represents a unique opportunity to understand how the consumer packaged goods food and beverage sector is changing and how these changes are associated with changes in the American diet. It presents data on national caloric sales from this sector, purchases of these goods by various subpopulations, and methods linking these to individual intakes of Americans. Findings show that HWCF companies accounted for approximately 25% of calories consumed in the U.S. in 2007 and that the 1.5 trillion-calorie pledge (about 14 calories/day/capita) accounts for 0.8% of the calories sold across all consumer packaged goods food and beverage brands in 2007. The authors hope that this evaluation will continue to create models and methods for demonstrating the effects of changes in the food supply on individual diets, particularly among those from vulnerable subpopulations. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

The HIGHLEAD program: locating and designing highlead harvest units by using digital terrain models.

Treesearch

R.H. Twito; S.E. Reutebuch; R.J. McGaughey

1988-01-01

PLANS, a software package for integrated timber-harvest planning, uses digital terrain models to provide the topographic data needed to fit harvest and transportation designs to specific terrain. HIGHLEAD, an integral program in the PLANS package, is used to design the timber-harvest units to be yarded by highlead systems. It solves for the yarding limits of direct...

Food product design: emerging evidence for food policy.

PubMed

Al-Hamdani, Mohammed; Smith, Steven

2017-03-01

The research on the impact of specific brand elements such as food descriptors and package colors is underexplored. We tested whether a "light" color and a "low-calorie" descriptor on food packages gain favorable consumer perception ratings as compared with regular packages. Our online experiment recruited 406 adults in a 3 (product type: Chips versus Juice versus Yoghurt) × 2 (descriptor type: regular versus low-calorie) × 2 (color type: regular versus light) mixed design. Dependent variables were sensory (evaluations of the product's nutritional value and quality), product-based (evaluations of the product's physical appeal), and consumer-based (evaluations of the potential consumers of the product) scales. "Low-calorie" descriptors were found to increase sensory ratings as compared with regular descriptors and light-colored packages received higher product-based ratings as compared with their regular-colored counterparts. Food package color and descriptors present a promising venue for understanding preventative measures against obesity.[Formula: see text].

[A research of letter color visibility in package insert information using simulator].

PubMed

Kamimura, Naoki; Kinoshita, Noriyuki; Onaga, Midori; Watanabe, Yurika; Ijuin, Kazushige; Shikamura, Yoshiaki; Negishi, Kenichi; Kaiho, Fusao; Ohta, Takafumi

2012-01-01

Package insert of pharmaceutical drug is one of the most prioritized information for pharmacists to secure safety of patients. However, the color of character, size, font and so on are various company by company product to product from a viewpoint of visibility. It may be cause a serious accident in case visibility is unclear, although it is the most important information. Moreover, package insert with high visibility is required for color vision defectives from a viewpoint of a universal design. Then, the authors selected the package insert which has the boxed warning in the ethical pharmaceutical currently stored mostly in the present health insurance pharmacy and quantified the red color using the color meter. We advocate the state of a suitable package insert from a viewpoint of a universal design, whether the red color is high visible or not for color vision defectives using simulator.

Metrics for Automotive Merchandising, Petroleum Marketing.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students in automotive merchandising and petroleum marketing classes, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know…

21 CFR 111.20 - What design and construction requirements apply to your physical plant?

Code of Federal Regulations, 2012 CFR

2012-04-01

... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Physical Plant and Grounds... use in the manufacture, packaging, labeling, or holding of dietary supplements must: (a) Be suitable... dietary supplements during manufacturing, packaging, labeling, or holding; (c) Permit the use of proper...

21 CFR 111.20 - What design and construction requirements apply to your physical plant?

Code of Federal Regulations, 2014 CFR

2014-04-01

... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Physical Plant and Grounds... use in the manufacture, packaging, labeling, or holding of dietary supplements must: (a) Be suitable... dietary supplements during manufacturing, packaging, labeling, or holding; (c) Permit the use of proper...

Metrics for Food Distribution.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in food distribution, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

21 CFR 310.3 - Definitions and interpretations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of any substance which composes such drug, in whole or in part, whether it be an active substance or... the liability of similar side effects and contraindications. (l) Special packaging as defined in section 2(4) of the Poison Prevention Packaging Act of 1970 means packaging that is designed or...

21 CFR 310.3 - Definitions and interpretations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of any substance which composes such drug, in whole or in part, whether it be an active substance or... the liability of similar side effects and contraindications. (l) Special packaging as defined in section 2(4) of the Poison Prevention Packaging Act of 1970 means packaging that is designed or...

49 CFR 173.27 - General requirements for transportation by aircraft.

Code of Federal Regulations, 2010 CFR

2010-10-01

... packaging requirements of this subchapter. (ii) Packagings which are subject to the hydrostatic pressure...-carrying aircraft. (c) Pressure requirements. (1) Packagings must be designed and constructed to prevent... without leakage the greater of— (i) An internal pressure which produces a gauge pressure of not less than...

Getting started with package sampSurf

Treesearch

Jeffrey H. Gove

2014-01-01

The sampSurf package is designed to facilitate the comparison of new and existing areal sampling methods through simulation. The package is thoroughly documented in several vignettes as mentioned below. This document is meant to point you in the right direction in finding the needed information to get started using sampSurf.

Metrics for Small Engine Repair.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of small engine repair students, this instructional package is one of four for the transportation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

Metrics for Architectural, Civil, Mechanical Drafting.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of architectural, civil, mechanical drafting students, this instructional package is one of six for the communication media occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the…

49 CFR 178.606 - Stacking test.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Stacking test. 178.606 Section 178.606... Packagings and Packages § 178.606 Stacking test. (a) General. All packaging design types other than bags must be subjected to a stacking test. (b) Number of test samples. Three test samples are required for each...

49 CFR 178.985 - Vibration test.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Vibration test. 178.985 Section 178.985... Packagings § 178.985 Vibration test. (a) General. All rigid Large Packaging and flexible Large Packaging design types must be capable of withstanding the vibration test. (b) Test method. (1) A sample Large...

33 CFR 126.27 - General permit for handling dangerous cargo.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) in bulk, portable tanks, containers, or packagings, at designated waterfront facilities, conditioned... bulk packaging; or Division 2.3 (Poison Gas) materials in excess of 72,800 kg (80 net tons) at any one... cargo in limited-quantity packaging. (e) Transport units and portable tanks containing dangerous cargo...

Metrics for Recreation & Tourism.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of recreation and tourism students, this instructional package is one of three for the hospitality and recreation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

Metrics for Hotel and Lodging.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in hotel and lodging, this instructional package is one of three for the hospitality and recreation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the…

Metrics for Food Services.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of food services students, this instructional package is one of three for the hospitality and recreation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

49 CFR 178.985 - Vibration test.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Vibration test. 178.985 Section 178.985... Packagings § 178.985 Vibration test. (a) General. All rigid Large Packaging and flexible Large Packaging design types must be capable of withstanding the vibration test. (b) Test method. (1) A sample Large...

49 CFR 178.985 - Vibration test.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Vibration test. 178.985 Section 178.985... Packagings § 178.985 Vibration test. (a) General. All rigid Large Packaging and flexible Large Packaging design types must be capable of withstanding the vibration test. (b) Test method. (1) A sample Large...

49 CFR 178.985 - Vibration test.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Vibration test. 178.985 Section 178.985... Testing of Large Packagings § 178.985 Vibration test. (a) General. All rigid Large Packaging and flexible Large Packaging design types must be capable of withstanding the vibration test. (b) Test method. (1) A...

49 CFR 178.985 - Vibration test.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Vibration test. 178.985 Section 178.985... Packagings § 178.985 Vibration test. (a) General. All rigid Large Packaging and flexible Large Packaging design types must be capable of withstanding the vibration test. (b) Test method. (1) A sample Large...

49 CFR 178.606 - Stacking test.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Testing of Non-bulk Packagings and Packages § 178.606 Stacking test. (a) General. All packaging design... subjected to a force applied to the top surface of the test sample equivalent to the total weight of... non-hazardous liquids with specific gravities different from that of the liquid to be transported, the...

Plastic-Sealed Hybrid Power Circuit Package

NASA Technical Reports Server (NTRS)

Miller, W. N.; Gray, O. E.

1983-01-01

Proposed design for hybrid high-voltage power-circuit package uses molded plastic for hermetic sealing instead of glass-to-metal seal. New package used to house high-voltage regulators and solid-state switches for applications in aircraft, electric automobiles, industrial equipment, satellites, solarcell arrays, and other equipment in extreme environments.

Metrics for Nurses Aides.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in becoming nurses aides, this instructional package is one of five for the health occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

Maintenance and supply options

NASA Technical Reports Server (NTRS)

1988-01-01

The object of the Maintenance and Supply Option was to develop a high level operational philosophy related to maintenance and supply operations and incorporate these concepts into the Lunar Base Study. Specific products to be generated during this task were three trade studies and a conceptual design of the Logistic Supply Module. The crew size study was performed to evaluate crew sizes from the baseline size of four to a crew size of eight and determine the preferred crew size. The second trade study was to determine the impact of extending surface stay times and recommend a preferred duration of stay time as a function of crew, consumables, and equipment support capabilities. The third trade study was an evaluation of packaging and storage methods to determine the preferred logistics approach to support the lunar base. A modified scenario was developed and served as the basis of the individual trade studies. Assumptions and guidelines were also developed from experience with Apollo programs, Space Shuttle operations, and Space Station studies. With this information, the trade studies were performed and a conceptual design for the Logistic Supply Module was developed.

Solar dynamic power systems for space station

NASA Technical Reports Server (NTRS)

Irvine, Thomas B.; Nall, Marsha M.; Seidel, Robert C.

1986-01-01

The Parabolic Offset Linearly Actuated Reflector (POLAR) solar dynamic module was selected as the baseline design for a solar dynamic power system aboard the space station. The POLAR concept was chosen over other candidate designs after extensive trade studies. The primary advantages of the POLAR concept are the low mass moment of inertia of the module about the transverse boom and the compactness of the stowed module which enables packaging of two complete modules in the Shuttle orbiter payload bay. The fine pointing control system required for the solar dynamic module has been studied and initial results indicate that if disturbances from the station are allowed to back drive the rotary alpha joint, pointing errors caused by transient loads on the space station can be minimized. This would allow pointing controls to operate in bandwidths near system structural frequencies. The incorporation of the fine pointing control system into the solar dynamic module is fairly straightforward for the three strut concentrator support structure. However, results of structural analyses indicate that this three strut support is not optimum. Incorporation of a vernier pointing system into the proposed six strut support structure is being studied.

Radiation-Resistant Photon-Counting Detector Package Providing Sub-ps Stability for Laser Time Transfer in Space

NASA Technical Reports Server (NTRS)

Prochzaka, Ivan; Kodat, Jan; Blazej, Josef; Sun, Xiaoli (Editor)

2015-01-01

We are reporting on a design, construction and performance of photon-counting detector packages based on silicon avalanche photodiodes. These photon-counting devices have been optimized for extremely high stability of their detection delay. The detectors have been designed for future applications in fundamental metrology and optical time transfer in space. The detectors have been qualified for operation in space missions. The exceptional radiation tolerance of the detection chip itself and of all critical components of a detector package has been verified in a series of experiments.

Training quality job interviews with adults with developmental disabilities.

PubMed

Mozingo, D; Ackley, G B; Bailey, J S

1994-01-01

Supported work models of vocational integration have increased the employability of individuals with developmental disabilities. Interview questions most frequently used and corresponding responses considered most beneficial to job applicants were derived from an empirical analysis of the "hiring community" and served as a basis for the development of the verbal job interview skills training package evaluated in this research. Dependent measures were objective, behavioral indices of the quality of job interview responses. One-to-one training by a direct training staff, job coach, and a trained behavior analyst resulted in improved responding by all subjects as indicated in a multiple baseline design across interview questions. Improved quality in responding to questions generalized to variations in interview questions, to a novel interviewer, and in an in vivo interview situation. Finally, global measures of social validity support the value of the quality-of-response training.

Quadrotor Control in the Presence of Unknown Mass Properties

NASA Astrophysics Data System (ADS)

Duivenvoorden, Rikky Ricardo Petrus Rufino

Quadrotor UAVs are popular due to their mechanical simplicity, as well as their capability to hover and vertically take-off and land. As applications diversify, quadrotors are increasingly required to operate under unknown mass properties, for example as a multirole sensor platform or for package delivery operations. The work presented here consists of the derivation of a generalized quadrotor dynamic model without the typical simplifying assumptions on the first and second moments of mass. The maximum payload capacity of a quadrotor in hover, and the observability of the unknown mass properties are discussed. A brief introduction of L1 adaptive control is provided, and three different L 1 adaptive controllers were designed for the Parrot AR.Drone quadrotor. Their tracking and disturbance rejection performance was compared to the baseline nonlinear controller in experiments. Finally, the results of the combination of L1 adaptive control with iterative learning control are presented, showing high performance trajectory tracking under uncertainty.

Using Multi-Component Consultation to Increase the Integrity with Which Teachers Implement Behavioral Classroom Interventions: A Pilot Study

ERIC Educational Resources Information Center

Owens, Julie Sarno; Coles, Erika K.; Evans, Steven W.; Himawan, Lina K.; Girio-Herrera, Erin; Holdaway, Alex S.; Zoromski, Allison K.; Schamberg, Terah; Schulte, Ann

2017-01-01

The goal of this pilot study was to evaluate the effectiveness of a multi-component consultation package in improving teachers' classroom management skills, particularly among teachers with lower baseline levels of knowledge, skills, and intervention-supportive beliefs. Participants were 58 elementary school teachers (93% female; 50% Non-Hispanic…

Performance of conduction cooled splittable superconducting magnet package for linear accelerators

DOE PAGES

Kashikhin, Vladimire S.; Andreev, N.; Cheban, S.; ...

2016-02-19

New Linear Superconducting Accelerators need a superconducting magnet package installed inside SCRF Cryomodules to focus and steer electron or proton beams. A superconducting magnet package was designed and built as a collaborative effort of FNAL and KEK. The magnet package includes one quadrupole, and two dipole windings. It has a splittable in the vertical plane configuration, and features for conduction cooling. The magnet was successfully tested at room temperature, in a liquid He bath, and in a conduction cooling experiment. The paper describes the design and test results including: magnet cooling, training, and magnetic measurements by rotational coils. Furthermore, themore » effects of superconductor and iron yoke magnetization, hysteresis, and fringe fields are discussed.« less

Language Analysis Package (L.A.P.) Version I System Design.

ERIC Educational Resources Information Center

Porch, Ann

To permit researchers to use the speed and versatility of the computer to process natural language text as well as numerical data without undergoing special training in programing or computer operations, a language analysis package has been developed partially based on several existing programs. An overview of the design is provided and system…

21 CFR 201.62 - Declaration of net quantity of contents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... generally parallel to the base on which the package rests as it is designed to be displayed: Provided, That...: Provided, That in the case of drugs packed in containers designed to deliver the drug under pressure, the... contrast (by typography, layout, color, embossing, or molding) to other matter on the package; except that...

21 CFR 201.62 - Declaration of net quantity of contents.

Code of Federal Regulations, 2012 CFR

2012-04-01

... generally parallel to the base on which the package rests as it is designed to be displayed: Provided, That...: Provided, That in the case of drugs packed in containers designed to deliver the drug under pressure, the... contrast (by typography, layout, color, embossing, or molding) to other matter on the package; except that...

The Analysis of the Regression-Discontinuity Design in R

ERIC Educational Resources Information Center

Thoemmes, Felix; Liao, Wang; Jin, Ze

2017-01-01

This article describes the analysis of regression-discontinuity designs (RDDs) using the R packages rdd, rdrobust, and rddtools. We discuss similarities and differences between these packages and provide directions on how to use them effectively. We use real data from the Carolina Abecedarian Project to show how an analysis of an RDD can be…

Container Design and Packaging; Art Education: 6693.13.

ERIC Educational Resources Information Center

Dubocq, Edward R.

Offered as an exploratory course in the highly technical field of container and packaging design, emphasis is placed on refined knowledge of the basic techniques used in preparing visuals, color camps, and working drawings. Study of related information such as consumer psychology and color, layout, and lettering is included in this studio oriented…

DOE Office of Scientific and Technical Information (OSTI.GOV)

A. Herk; Poerschke, A.; Beach, R.

In 2012-2013, IBACOS worked with a builder, Brookfield Homes in Denver, Colorado, to design and construct a Passive House certified model home. IBACOS used several modeling programs and calculation methods to complete the final design package along with Brookfield's architect KGA Studio. This design package included upgrades to the thermal enclosure, basement insulation, windows, and heating, ventilation, and air conditioning. Short-term performance testing in the Passive House was done during construction and after construction.

Diamond Shaped Ring Laser Characterization, Package Design and Performance

DTIC Science & Technology

2006-09-01

fabricated by Binoptics, with the end facets formed by chemically assisted ion beam etching . The lasers, designed for operation at 1550 nm, propagated bi...calculated and Corning OptiFocus™ Lensed fiber was chosen to use for the four fiber outputs. Each fiber placement was actively optimized. Output power...aligned using active feedback and placed with submicron precision. The prototype package design was constrained to modification of a prior

System design package for SIMS prototype system 4, solar heating and domestic hot water

NASA Technical Reports Server (NTRS)

1978-01-01

The system consisted of a modular designed prepackaged solar unit, containing solar collectors, a rock storage container, blowers, dampers, ducting, air-to-water heat exchanger, DHW preheat tank, piping, and system controls. The system was designed to be installed adjacent to a small single family dwelling. The description, performance specification, subsystem drawings, verification plan/procedure, and hazard analysis of the system were packaged for evaluation.

The Shock and Vibration Digest. Volume 17, Number 4

DTIC Science & Technology

1985-04-01

software packages for engineering signed to be easy to use from the outset, computations which were specifically writ- and this design philosophy is largely...re- ten for use on microcomputers. Software sponsible for their increasing popularity; packages related to shock and vibration are this same design...philosophy appears to have available for both experimental and for been carried over to the design of today’s analytical applications. Typical software

Final system instrumentation design package for Decade 80 solar house

NASA Technical Reports Server (NTRS)

1978-01-01

The final configuration of the Decade 80 solar house to monitor and collect system performance data is presented. A review demonstrated by actual operation that the system and the data acquisition subsystem operated satisfactorily and installation of instrumentation was in accordance with the design. This design package is made up of (1) site and system description, (2) operating and control modes, and (3) instrumentation program (including sensor schematic).

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Observational study of the visibility of branded tobacco packaging and smoking at outdoor bars/cafes in Wellington, New Zealand.

PubMed

Martin, Natasha; McHugh, Hugh; Murtagh, Jono; Oliver-Rose, Connor; Panesar, Div; Pengelly, Harriet; Rieper, Scott; Schofield, Henry; Singh, Vidit; Speed, Amanda; Strachan, Rhona; Tapsell, Te Kahui; Trafford, Sara; van Ryn, Stefan; Ward, Ethan; Whiting, Rosie; Wilson-van Duin, Merryn; Wu, Zhou; Purdie, Gordon; van der Deen, Frederieke S; Thomson, George; Pearson, Amber L; Wilson, Nick

2014-10-17

To collect data on tobacco brand visibility on packaging on outdoor tables at bars/cafes in a downtown area, prior to a proposed plain packaging law. The study was conducted in the Central Business District of Wellington City in March 2014. Observational data were systematically collected on tobacco packaging visibility and smoking by patrons at 55 bars/cafes with outdoor tables. A total of 19,189 patrons, 1707 tobacco packs and 1357 active smokers were observed. One tobacco pack was visible per 11.0 patrons and the active smoking prevalence was 7.1% (95%CI: 4.9-9.2%), similar to Australian results (8.3%). Eighty percent of packs were positioned face-up (showing the brand), 8% face-down (showing the large pictorial warning), and 12% in other positions. Pack visibility per patron was significantly greater in areas without child patrons (RR=3.1, p<0.0001). Both smoking and pack visibility tended to increase from noon into the evenings on weekends. Inter-observer reliability for key measures in this study was high (Bland-Altman plots). Tobacco branding on packaging was frequently visible because of the way smokers position their packs. These results highlight the residual problem posed by this form of marketing. The results also provide baseline data for the future evaluation of plain packaging if a proposed law is implemented in New Zealand. Other results warrant further research, particularly the reasons for lower pack visibility and smoking when children were present.

High-Performance Power-Semiconductor Packages

NASA Technical Reports Server (NTRS)

Renz, David; Hansen, Irving; Berman, Albert

1989-01-01

A 600-V, 50-A transistor and 1,200-V, 50-A diode in rugged, compact, lightweight packages intended for use in inverter-type power supplies having switching frequencies up to 20 kHz. Packages provide low-inductance connections, low loss, electrical isolation, and long-life hermetic seal. Low inductance achieved by making all electrical connections to each package on same plane. Also reduces high-frequency losses by reducing coupling into inherent shorted turns in packaging material around conductor axes. Stranded internal power conductors aid conduction at high frequencies, where skin effect predominates. Design of packages solves historical problem of separation of electrical interface from thermal interface of high-power semiconductor device.

"Their Packaging Has Always Been Like a Power": A Qualitative Study of U.S. Smokers' Perceptions of Cigarette Pack Visual Design Features to Inform Product Regulation.

PubMed

Lee, Joseph G L; Averett, Paige E; Blanchflower, Tiffany; Landi, Nunzio; Gregory, Kyle R

2017-10-17

Cigarette packaging matters to consumer behavior. However, it is less clear which changes to packaging design would be salient for adult smokers. Such information is critically important to regulators in the United States who are charged with reviewing new tobacco products for their impact on population health. In this qualitative study, U.S. adult smokers ( n = 33) participated in six telephone-based focus groups in March 2017. Separate groups were comprised of lesbian, gay, and bisexual (LGB) participants; participants with less than four years of post-secondary education; a mix of LGB and straight participants; and, the general population. All groups were purposely selected for diversity. Open thematic coding identified salient design elements used on cigarette packaging. Smokers articulated design elements' use, meaning, and links with consumer behaviors. Three themes were identified: (1) the power of color, (2) supporting color with other design elements (e.g., logos/images, typography, the pack itself), and (3) the combined product brand experience of multiple design elements. Participants linked design elements to product characteristics and to consumer behavior (e.g., purchase). As the Food and Drug Administration is charged with regulating tobacco products, these findings suggest the importance of considering the cigarette pack part of the characteristics of a product.

“Their Packaging Has Always Been Like a Power”: A Qualitative Study of U.S. Smokers’ Perceptions of Cigarette Pack Visual Design Features to Inform Product Regulation

PubMed Central

Blanchflower, Tiffany; Landi, Nunzio; Gregory, Kyle R.

2017-01-01

Cigarette packaging matters to consumer behavior. However, it is less clear which changes to packaging design would be salient for adult smokers. Such information is critically important to regulators in the United States who are charged with reviewing new tobacco products for their impact on population health. In this qualitative study, U.S. adult smokers (n = 33) participated in six telephone-based focus groups in March 2017. Separate groups were comprised of lesbian, gay, and bisexual (LGB) participants; participants with less than four years of post-secondary education; a mix of LGB and straight participants; and, the general population. All groups were purposely selected for diversity. Open thematic coding identified salient design elements used on cigarette packaging. Smokers articulated design elements’ use, meaning, and links with consumer behaviors. Three themes were identified: (1) the power of color, (2) supporting color with other design elements (e.g., logos/images, typography, the pack itself), and (3) the combined product brand experience of multiple design elements. Participants linked design elements to product characteristics and to consumer behavior (e.g., purchase). As the Food and Drug Administration is charged with regulating tobacco products, these findings suggest the importance of considering the cigarette pack part of the characteristics of a product. PMID:29039769

Metrics for Litho Photography, Offset Stripping, Offset Platemaking.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in litho photography, offset stripping, and offset platemaking, this instructional package is one of six for the communication media occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students…

Applying Various Comprehension Strategies. Learning Package No. 8.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on applying various comprehension strategies is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Cultural Literacy. Learning Package No. 44.

ERIC Educational Resources Information Center

Hong, Zhang, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on cultural literacy is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

A Menagerie of Promotional Characters: Promoting Food to Children through Food Packaging

ERIC Educational Resources Information Center

Hebden, Lana; King, Lesley; Kelly, Bridget; Chapman, Kathy; Innes-Hughes, Christine

2011-01-01

Objective: To determine the extent to which (1) promotional characters are used on food packaging for healthful and less-healthful food and (2) different companies use this persuasive marketing strategy. Design: Cross-sectional supermarket audit of all food and beverages featuring promotional characters on the packaging. Setting: Three Australian…

49 CFR 178.503 - Marking of packagings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... that is represented as manufactured to meet a UN standard with the marks specified in this section. The... marks should be used to separate this information. A packaging conforming to a UN standard must be... “UN”) may be applied in place of the symbol;; (2) A packaging identification code designating the type...

49 CFR 178.503 - Marking of packagings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... that is represented as manufactured to meet a UN standard with the marks specified in this section. The... marks should be used to separate this information. A packaging conforming to a UN standard must be... “UN”) may be applied in place of the symbol;; (2) A packaging identification code designating the type...

49 CFR 178.503 - Marking of packagings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... that is represented as manufactured to meet a UN standard with the marks specified in this section. The... marks should be used to separate this information. A packaging conforming to a UN standard must be... “UN” may be applied in place of the symbol); (2) A packaging identification code designating the type...

49 CFR 178.503 - Marking of packagings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... that is represented as manufactured to meet a UN standard with the marks specified in this section. The... marks should be used to separate this information. A packaging conforming to a UN standard must be... “UN” may be applied in place of the symbol); (2) A packaging identification code designating the type...

49 CFR 173.412 - Additional design requirements for Type A packages.

Code of Federal Regulations, 2010 CFR

2010-10-01

... materials within the temperature range. (d) The packaging must include a containment system securely closed... in accordance with § 173.469, may be considered as a component of the containment system. If the containment system forms a separate unit of the package, it must be securely closed by a positive fastening...

Metrics for Food Preparation, Baking, Meat Cutting.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of food preparation, baking, meat cutting students, this instructional package is one of five for the home economics occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

Journal Writing. Learning Package No. 34.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on journal writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

A TAPS Interactive Multimedia Package to Solve Engineering Dynamics Problem

ERIC Educational Resources Information Center

Sidhu, S. Manjit; Selvanathan, N.

2005-01-01

Purpose: To expose engineering students to using modern technologies, such as multimedia packages, to learn, visualize and solve engineering problems, such as in mechanics dynamics. Design/methodology/approach: A multimedia problem-solving prototype package is developed to help students solve an engineering problem in a step-by-step approach. A…

Health Occupations. Nursing Assistant.

ERIC Educational Resources Information Center

Megow, Joye G.

Materials contained in this package are designed for use with students interested in the occupation of nurses aide. The package has two sections, one which looks closely at the job and the student, and the other--the curriculum phase--which concerns actual student use of learning activity packages (LAPs). These two components together form a "job…

Behavioral Skills Training in Portuguese Children With School Failure Problems

PubMed Central

Galindo, Edgar; Candeias, Adelinda A.; Pires, Heldemerina S.; Grácio, Luísa; Stück, Marcus

2018-01-01

This paper postulates that psychology can make an important contribution at an individual level to help children with school failure problems in a context where too little applied research has been conducted on the instructional needs of these children. Some data are analyzed, revealing that, despite some progress, school failure is still a main educational problem in many countries. In this study, Behavioral Skills Training (BST) was applied in Portugal to train children with school failure difficulties. BST is a method based on Applied Behavior Analysis, a teaching package consisting of a combination of behavioral techniques: instructions, modeling, rehearsal, and feedback. Two empirical studies are presented. Their main purpose was to develop behavioral diagnostic and training techniques to teach lacking skills. School success was defined in terms of a set of skills proposed by teachers and school failure as a lack of one or more of these skills. The main instrument was a package of training programs to be applied in three areas: basic behavior (precurrents), academic behavior, or social behavior. The second instrument is a package of check-lists, aimed to determine the level of performance of the child in an area. This check-list was applied before (pre-test) and after (post-test) training. In the first study, 16, 7- to 8-year old children were trained. They were attending the second or third grades and having academic difficulties of different origins. The effects of the training programs are evaluated in terms of percentage of attained objectives, comparing a pre- and a post-test. The results showed an increase in correct responses after training in all cases. To provide a sounder demonstration of the efficacy of the training programs, a second study was carried out using a quasi-experimental design. A multiple baseline design was applied to three 10- to 11-year-old children, referred by teachers because of learning difficulties in the fourth grade. Results showed few performance changes without training. Increases in behavior following BST were evident in all cases, indicating that training generated improvement in all three children. In both studies, comparable results occurred across students, demonstrating replication of the effects of the training programs. PMID:29896134

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harmony, S.C.; Steiner, J.L.; Stumpf, H.J.

The PIUS advanced reactor is a 640-MWe pressurized water reactor developed by Asea Brown Boveri (ABB). A unique feature of the PIUS concept is the absence of mechanical control and shutdown rods. Reactivity is controlled by coolant boron concentration and the temperature of the moderator coolant. As part of the preapplication and eventual design certification process, advanced reactor applicants are required to submit neutronic and thermal-hydraulic safety analyses over a sufficient range of normal operation, transient conditions, and specified accident sequences. Los Alamos is supporting the US Nuclear Regulatory Commission`s preapplication review of the PIUS reactor. A fully one-dimensional modelmore » of the PIUS reactor has been developed for the Transient Reactor Analysis Code, TRACPF1/MOD2. Early in 1992, ABB submitted a Supplemental Information Package describing recent design modifications. An important feature of the PIUS Supplement design was the addition of an active scram system that will function for most transient and accident conditions. A one-dimensional Transient Reactor Analysis Code baseline calculation of the PIUS Supplement design were performed for a break in the main steam line at the outlet nozzle of the loop 3 steam generator. Sensitivity studies were performed to explore the robustness of the PIUS concept to severe off-normal conditions following a main steam line break. The sensitivity study results provide insights into the robustness of the design.« less

Wavelet analysis to decompose a vibration simulation signal to improve pre-distribution testing of packaging

NASA Astrophysics Data System (ADS)

Griffiths, K. R.; Hicks, B. J.; Keogh, P. S.; Shires, D.

2016-08-01

In general, vehicle vibration is non-stationary and has a non-Gaussian probability distribution; yet existing testing methods for packaging design employ Gaussian distributions to represent vibration induced by road profiles. This frequently results in over-testing and/or over-design of the packaging to meet a specification and correspondingly leads to wasteful packaging and product waste, which represent 15bn per year in the USA and €3bn per year in the EU. The purpose of the paper is to enable a measured non-stationary acceleration signal to be replaced by a constructed signal that includes as far as possible any non-stationary characteristics from the original signal. The constructed signal consists of a concatenation of decomposed shorter duration signals, each having its own kurtosis level. Wavelet analysis is used for the decomposition process into inner and outlier signal components. The constructed signal has a similar PSD to the original signal, without incurring excessive acceleration levels. This allows an improved and more representative simulated input signal to be generated that can be used on the current generation of shaker tables. The wavelet decomposition method is also demonstrated experimentally through two correlation studies. It is shown that significant improvements over current international standards for packaging testing are achievable; hence the potential for more efficient packaging system design is possible.

A Multiple-Sequence Variant of the Multiple-Baseline Design: A Strategy for Analysis of Sequence Effects and Treatment Comparison.

ERIC Educational Resources Information Center

Noell, George H.; Gresham, Frank M.

2001-01-01

Describes design logic and potential uses of a variant of the multiple-baseline design. The multiple-baseline multiple-sequence (MBL-MS) consists of multiple-baseline designs that are interlaced with one another and include all possible sequences of treatments. The MBL-MS design appears to be primarily useful for comparison of treatments taking…

A Fatigue Crack Size Evaluation Method Based on Lamb Wave Simulation and Limited Experimental Data

PubMed Central

He, Jingjing; Ran, Yunmeng; Liu, Bin; Yang, Jinsong; Guan, Xuefei

2017-01-01

This paper presents a systematic and general method for Lamb wave-based crack size quantification using finite element simulations and Bayesian updating. The method consists of construction of a baseline quantification model using finite element simulation data and Bayesian updating with limited Lamb wave data from target structure. The baseline model correlates two proposed damage sensitive features, namely the normalized amplitude and phase change, with the crack length through a response surface model. The two damage sensitive features are extracted from the first received S0 mode wave package. The model parameters of the baseline model are estimated using finite element simulation data. To account for uncertainties from numerical modeling, geometry, material and manufacturing between the baseline model and the target model, Bayesian method is employed to update the baseline model with a few measurements acquired from the actual target structure. A rigorous validation is made using in-situ fatigue testing and Lamb wave data from coupon specimens and realistic lap-joint components. The effectiveness and accuracy of the proposed method is demonstrated under different loading and damage conditions. PMID:28902148

Savannah River Site Eastern Transportation Hub: A Concept For a DOE Eastern Packaging, Staging and Maintenance Center - 13143

DOE Office of Scientific and Technical Information (OSTI.GOV)

England, Jeffery L.; Adams, Karen; Maxted, Maxcine

2013-07-01

The Department of Energy (DOE) is working to de-inventory sites and consolidate hazardous materials for processing and disposal. The DOE administers a wide range of certified shipping packages for the transport of hazardous materials to include Special Nuclear Material (SNM), radioactive materials, sealed sources and radioactive wastes. A critical element to successful and safe transportation of these materials is the availability of certified shipping packages. There are over seven thousand certified packagings (i.e., Type B/Type AF) utilized within the DOE for current missions. The synergistic effects of consolidated maintenance, refurbishment, testing, certification, and costing of these services would allow formore » efficient management of the packagings inventory and to support anticipated future in-commerce shipping needs. The Savannah River Site (SRS) receives and ships radioactive materials (including SNM) and waste on a regular basis for critical missions such as consolidated storage, stabilization, purification, or disposition using H-Canyon and HB-Line. The Savannah River National Laboratory (SRNL) has the technical capability and equipment for all aspects of packaging management. SRS has the only active material processing facility in the DOE complex and is one of the sites of choice for nuclear material consolidation. SRS is a logical location to perform maintenance and periodic testing of the DOE fleet of certified packagings. This initiative envisions a DOE Eastern Packaging Staging and Maintenance Center (PSMC) at the SRS and a western hub at the Nevada National Security Site (NNSS), an active DOE Regional Disposal Site. The PSMC's would be the first place DOE would go to meet their radioactive packaging needs and the primary locations projects would go to disposition excess packaging for beneficial reuse. These two hubs would provide the centralized management of a packaging fleet rather than the current approach to design, procure, maintain and dispose of packagings on a project-by-project basis. This initiative provides significant savings in packaging costs and acceleration of project schedules. In addition to certified packaging, the PSMC would be well suited for select designs of 7A Type A packaging and Industrial Packaging. (authors)« less

Metabolic Pathways.

ERIC Educational Resources Information Center

Voige, William H.

1981-01-01

Two new packages designed to aid students in typical undergraduate biochemistry courses are described. These packages deal with alcoholic fermentation and the reversal of glycolysis and the reactions of the citric cycle. (MP)

Strengthening primary eye care in South Africa: An assessment of services and prospective evaluation of a health systems support package

PubMed Central

Lilian, Rivka R.; Railton, Jean; Schaftenaar, Erik; Mabitsi, Moyahabo; Grobbelaar, Cornelis J.; Khosa, N. Sellina; Maluleke, Babra H.; Struthers, Helen E.; McIntyre, James A.

2018-01-01

Visual impairment is a significant public health concern, particularly in low- and middle-income countries where eye care is predominantly provided at the primary healthcare (PHC) level, known as primary eye care. This study aimed to perform an evaluation of primary eye care services in three districts of South Africa and to assess whether an ophthalmic health system strengthening (HSS) package could improve these services. Baseline surveys were conducted in Cape Winelands District, Johannesburg Health District and Mopani District at 14, 25 and 36 PHC facilities, respectively. Thereafter, the HSS package, comprising group training, individual mentoring, stakeholder engagement and resource provision, was implemented in 20 intervention sites in Mopani District, with the remaining 16 Mopani facilities serving as control sites. At baseline, less than half the facilities in Johannesburg and Mopani had dedicated eye care personnel or sufficient space to measure visual acuity. Although visual acuity charts were available in most facilities, <50% assessed patients at the correct distance. Median score for availability of nine essential drugs was <70%. Referral criteria knowledge was highest in Cape Winelands and Johannesburg, with poor clinical knowledge across all districts. Several HSS interventions produced successful outcomes: compared to control sites there was a significant increase in the proportion of intervention sites with eye care personnel and resources such as visual acuity charts (p = 0.02 and <0.01, respectively). However, engaging with district pharmacists did not improve availability of essential drugs (p = 0.47). Referral criteria knowledge improved significantly in intervention sites (p<0.01) but there was no improvement in clinical knowledge (p = 0.76). Primary eye care in South Africa faces multiple challenges with regard to organisation of care, resource availability and clinical competence. The HSS package successfully improved some aspects of this care, but further development is warranted together with debate regarding the positioning of eye services at PHC level. PMID:29758069

A randomized, controlled, single-blind trial of teaching provided by a computer-based multimedia package versus lecture.

PubMed

Williams, C; Aubin, S; Harkin, P; Cottrell, D

2001-09-01

Computer-based teaching may allow effective teaching of important psychiatric knowledge and skills. To investigate the effectiveness and acceptability of computer-based teaching. A single-blind, randomized, controlled study of 166 undergraduate medical students at the University of Leeds, involving an educational intervention of either a structured lecture or a computer-based teaching package (both of equal duration). There was no difference in knowledge between the groups at baseline or immediately after teaching. Both groups made significant gains in knowledge after teaching. Students who attended the lecture rated their subjective knowledge and skills at a statistically significantly higher level than students who had used the computers. Students who had used the computer package scored higher on an objective measure of assessment skills. Students did not perceive the computer package to be as useful as the traditional lecture format, despite finding it easy to use and recommending its use to other students. Medical students rate themselves subjectively as learning less from computer-based as compared with lecture-based teaching. Objective measures suggest equivalence in knowledge acquisition and significantly greater skills acquisition for computer-based teaching.

Evaluation of a TB infection control implementation initiative in out-patient HIV clinics in Zambia and Botswana.

PubMed

Emerson, C; Lipke, V; Kapata, N; Mwananyambe, N; Mwinga, A; Garekwe, M; Lanje, S; Moshe, Y; Pals, S L; Nakashima, A K; Miller, B

2016-07-01

Out-patient human immunodeficiency virus (HIV) care and treatment clinics in Zambia and Botswana, countries with a high burden of HIV and TB infection. To develop a tuberculosis infection control (TB IC) training and implementation package and evaluate the implementation of TB IC activities in facilities implementing the package. Prospective program evaluation of a TB IC training and implementation package using a standardized facility risk assessment tool, qualitative interviews with facility health care workers and measures of pre- and post-test performance. A composite measure of facility performance in TB IC improved from 32% at baseline to 50% at 1 year among eight facilities in Zambia, and from 27% to 80% at 6 months among 10 facilities in Botswana. Although there was marked improvement in indicators of managerial, administrative and environmental controls, key ongoing challenges remained in ensuring access to personal protective equipment and implementing TB screening in health care workers. TB IC activities at out-patient HIV clinics in Zambia and Botswana improved after training using the implementation package. Continued infrastructure support, as well as monitoring and evaluation, are needed to support the scale-up and sustainability of TB IC programs in facilities in low-resource countries.

Ultra Low Temperature Ultra Low Power Instrument Packages for Planetary Surfaces

NASA Technical Reports Server (NTRS)

Clark, P. E.; Millar, P. S.; Beaman, B.; Yeh, P. S.; Cooper, L.; Feng, S.; Young, E.

2010-01-01

Achievement of solar system exploration roadmap goals will involve robotic or human deployment and longterm operation of surface science packages remote from human presence, thus requiring autonomous, self-powered operation. The major challenge such packages face will be operating during long periods of darkness in extreme cold potentially without the Pu238 based power and thermal systems available to Apollo era packages (ALSEP). Development of such science payloads will thus require considerable optimization of instrument and subsystem design, packaging and integration for a variety of planetary surface environments in order to support solar system exploration fully. Our work supports this process through the incorporation of low temperature operational components and design strategies which radically minimize power, mass, and cost while maximizing the performance under extreme surface conditions that are in many cases more demanding than those routinely experienced by spacecraft in deep space. Chief instruments/instrument package candidates include those which could provide long-term monitoring of the surface and subsurface environments for fundamental science and human crew safety. The initial attempt to design a 10 instrument environmental monitoring package with a solar/battery based power system led to a package with a unacceptably large mass (500 kg) of which over half was battery mass. In phase 1, a factor of 5 reduction in mass was achieved, first through the introduction of high performance electronics capable of operating at far lower temperature and then through the use of innovative thermal balance strategies involving the use of multi-layer thin materials and gravity-assisted heat pipes. In phase 2, reported here, involves strategies such as universal incorporation of ULT/ULP digital and analog electronics, and distributed or non-conventionally packaged power systems. These strategies will be required to meet the far more challenging thermal requirements of operating through a normal 28 day diurnal cycle. The limited temperature range of efficient battery operation remains the largest obstacle.

Is consumer response to plain/standardised tobacco packaging consistent with framework convention on tobacco control guidelines? A systematic review of quantitative studies.

PubMed

Stead, Martine; Moodie, Crawford; Angus, Kathryn; Bauld, Linda; McNeill, Ann; Thomas, James; Hastings, Gerard; Hinds, Kate; O'Mara-Eves, Alison; Kwan, Irene; Purves, Richard I; Bryce, Stuart L

2013-01-01

Standardised or 'plain' tobacco packaging was introduced in Australia in December 2012 and is currently being considered in other countries. The primary objective of this systematic review was to locate, assess and synthesise published and grey literature relating to the potential impacts of standardised tobacco packaging as proposed by the guidelines for the international Framework Convention on Tobacco Control: reduced appeal, increased salience and effectiveness of health warnings, and more accurate perceptions of product strength and harm. Electronic databases were searched and researchers in the field were contacted to identify studies. Eligible studies were published or unpublished primary research of any design, issued since 1980 and concerning tobacco packaging. Twenty-five quantitative studies reported relevant outcomes and met the inclusion criteria. A narrative synthesis was conducted. Studies that explored the impact of package design on appeal consistently found that standardised packaging reduced the appeal of cigarettes and smoking, and was associated with perceived lower quality, poorer taste and less desirable smoker identities. Although findings were mixed, standardised packs tended to increase the salience and effectiveness of health warnings in terms of recall, attention, believability and seriousness, with effects being mediated by the warning size, type and position on pack. Pack colour was found to influence perceptions of product harm and strength, with darker coloured standardised packs generally perceived as containing stronger tasting and more harmful cigarettes than fully branded packs; lighter coloured standardised packs suggested weaker and less harmful cigarettes. Findings were largely consistent, irrespective of location and sample. The evidence strongly suggests that standardised packaging will reduce the appeal of packaging and of smoking in general; that it will go some way to reduce consumer misperceptions regarding product harm based upon package design; and will help make the legally required on-pack health warnings more salient.

Is Consumer Response to Plain/Standardised Tobacco Packaging Consistent with Framework Convention on Tobacco Control Guidelines? A Systematic Review of Quantitative Studies

PubMed Central

Stead, Martine; Moodie, Crawford; Angus, Kathryn; Bauld, Linda; McNeill, Ann; Thomas, James; Hastings, Gerard; Hinds, Kate; O'Mara-Eves, Alison; Kwan, Irene; Purves, Richard I.; Bryce, Stuart L.

2013-01-01

Background and Objectives Standardised or ‘plain’ tobacco packaging was introduced in Australia in December 2012 and is currently being considered in other countries. The primary objective of this systematic review was to locate, assess and synthesise published and grey literature relating to the potential impacts of standardised tobacco packaging as proposed by the guidelines for the international Framework Convention on Tobacco Control: reduced appeal, increased salience and effectiveness of health warnings, and more accurate perceptions of product strength and harm. Methods Electronic databases were searched and researchers in the field were contacted to identify studies. Eligible studies were published or unpublished primary research of any design, issued since 1980 and concerning tobacco packaging. Twenty-five quantitative studies reported relevant outcomes and met the inclusion criteria. A narrative synthesis was conducted. Results Studies that explored the impact of package design on appeal consistently found that standardised packaging reduced the appeal of cigarettes and smoking, and was associated with perceived lower quality, poorer taste and less desirable smoker identities. Although findings were mixed, standardised packs tended to increase the salience and effectiveness of health warnings in terms of recall, attention, believability and seriousness, with effects being mediated by the warning size, type and position on pack. Pack colour was found to influence perceptions of product harm and strength, with darker coloured standardised packs generally perceived as containing stronger tasting and more harmful cigarettes than fully branded packs; lighter coloured standardised packs suggested weaker and less harmful cigarettes. Findings were largely consistent, irrespective of location and sample. Conclusions The evidence strongly suggests that standardised packaging will reduce the appeal of packaging and of smoking in general; that it will go some way to reduce consumer misperceptions regarding product harm based upon package design; and will help make the legally required on-pack health warnings more salient. PMID:24146791

Tight-binding model for materials at mesoscale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tai, Yuan-Yen; Choi, Hongchul; Zhu, Wei

2016-12-21

TBM3 is an open source package for computational simulations of quantum materials at multiple scales in length and time. The project originated to investigate the multiferroic behavior in transition-metal oxide heterostructures. The framework has also been designed to study emergent phemona in other quantum materials like 2-dimensional transition-metal dichalcogenides, graphene, topological insulators, and skyrmion in materials, etc. In the long term, we will enable the package for transport and time-resolved phenomena. TBM3 is currently a C++ based numerical tool package and framework for the design and construction of any kind of lattice structures with multi-orbital and spin degrees of freedom.more » The fortran based portion of the package will be added in the near future. The design of TBM3 is in a highly flexible and reusable framework and the tight-binding parameters can be modeled or informed by DFT calculations. It is currently GPU enabled and feature of CPU enabled MPI will be added in the future.« less

Teaching Old Packaging New Tricks - 12593

DOE Office of Scientific and Technical Information (OSTI.GOV)

England, Jeffery L.; Shuler, James M.

2012-07-01

Waste disposition campaigns have been an industry and government focus area since the mid- 1970's. With increased focus on this issue, and a lot of hard work, most waste packaging and transportation issues have been addressed. The material has been successfully shipped and dis-positioned. DOE has successfully de-inventoried materials from multiple sites to meet material consolidation, footprint reduction, nonproliferation, and regulatory obligations with cost savings from reduced maintenance and regulatory compliance. There has been a wide range of certified shipping packagings for the transportation of hazardous materials to meet most of the waste needs. The remaining materials are problematic, generallymore » low volume, and do not meet the certified content of the existing inventory of packaging. Designing, testing and certifying new packaging designs can be a long and expensive process and for small volumes of material it is cost prohibitive. One very cost effective option is to lease and use a certified packaging to overpack waste containers. There are many robust certified packagings available with the capability to envelope the waste content. The capability to use inner containers, inside the current fleet of certified casks or packaging, to address specific content problems of additional shielding (e.g., U-233) or containment (e.g., sodium bonded nuclear material) has successfully expanded the capability for timely cost effective shipment of unique contents. This option has been used successfully in the NAC-LWT, T-3 and other packagings. (authors)« less

Effects of Computer Animation Instructional Package on Students' Achievement in Practical Biology

ERIC Educational Resources Information Center

Hamzat, Abdulrasaq; Bello, Ganiyu; Abimbola, Isaac Olakanmi

2017-01-01

This study examined the effects of computer animation instructional package on secondary school students' achievement in practical biology in Ilorin, Nigeria. The study adopted a pre-test, post-test, control group, non-randomised and nonequivalent quasi-experimental design, with a 2x2x3 factorial design. Two intact classes from two secondary…

Next-generation avionics packaging and cooling 'test results from a prototype system'

NASA Astrophysics Data System (ADS)

Seals, J. D.

The author reports on the design, material characteristics, and test results obtained under the US Air Force's advanced aircraft avionics packaging technologies (AAAPT) program, whose charter is to investigate new designs and technologies for reliable packaging, interconnection, and thermal management. Under this program, AT&T Bell Laboratories has completed the preliminary testing of and is evaluating a number of promising materials and technologies, including conformal encapsulation, liquid flow-through cooling, and a cyanate ester backplane. A fifty-two module system incorporating these and and other technologies has undergone preliminary cooling efficiency, shock, sine and random vibration, and maintenance testing. One of the primary objectives was to evaluate the interaction compatibility of new materials and designs with other components in the system.

Technical support package: Large, easily deployable structures. NASA Tech Briefs, Fall 1982, volume 7, no. 1

NASA Technical Reports Server (NTRS)

1982-01-01

Design and test data for packaging, deploying, and assembling structures for near term space platform systems, were provided by testing light type hardware in the Neutral Buoyancy Simulator. An optimum or near optimum structural configuration for varying degrees of deployment utilizing different levels of EVA and RMS was achieved. The design of joints and connectors and their lock/release mechanisms were refined to improve performance and operational convenience. The incorporation of utilities into structural modules to determine their effects on packaging and deployment was evaluated. By simulation tests, data was obtained for stowage, deployment, and assembly of the final structural system design to determine construction timelines, and evaluate system functioning and techniques.

Consumer perceptions of cigarette pack design in France: a comparison of regular, limited edition and plain packaging.

PubMed

Gallopel-Morvan, Karine; Moodie, Crawford; Hammond, David; Eker, Figen; Beguinot, Emmanuelle; Martinet, Yves

2012-09-01

In the face of comprehensive bans on the marketing of tobacco products, packaging has become an increasingly important promotional tool for the tobacco industry. A ban on the use of branding on tobacco packaging, known as 'plain' packaging, has emerged as a promising regulatory strategy. The current study sought to examine perceptions of cigarette packaging among adults in France. Adult smokers and non-smokers (N=836) were surveyed using computer-assisted personal interviewing to assess perceptions of pack design by comparing 'regular' branded packs and 'limited edition' packs (with novel designs or innovations) with 'plain' versions of these packs with all branding, including colour, removed. Plain packs (PP) were less likely than regular packs, and particularly limited edition packs, to be considered attractive, attention grabbing and likely to motivate youth purchase. PPs were also rated as the most effective in convincing non-smokers not to start and smokers to reduce consumption and quit. Logistic regression showed that smokers motivated to quit, in comparison to smokers not motivated to quit, were significantly more likely to consider the PPs as the packs most likely to motivate cessation. Novel cigarette packaging, in the form of limited edition packs, had the highest ratings of consumer appeal, ahead of regular branded packs and also PPs. Interestingly, PPs were perceived to be the packs most likely to promote cessation among those adults with quitting intentions. Plain packaging, therefore, may be a means of helping existing adult smokers motivated to quit to do so.

Swingbed Amine Carbon Dioxide Removal Flight Experiment - Feasibility Study and Concept Development for Cost-Effective Exploration Technology Maturation on The International Space Station

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Nalette, Timothy; Graf, John; Sweterlitsch, Jeffery; Hayley, Elizabeth; Williams, Antony; Button, Amy

2011-01-01

The completion of International Space Station Assembly and transition to a full six person crew has created the opportunity to create and implement flight experiments that will drive down the ultimate risks and cost for human space exploration by maturing exploration technologies in realistic space environments that are impossible or incredibly costly to duplicate in terrestrial laboratories. An early opportunity for such a technology maturation experiment was recognized in the amine swingbed technology baselined for carbon dioxide and humidity control on the Orion spacecraft and Constellation Spacesuit System. An experiment concept using an existing high fidelity laboratory swing bed prototype has been evaluated in a feasibility and concept definition study leading to the conclusion that the envisioned flight experiment can be both feasible and of significant value for NASA s space exploration technology development efforts. Based on the results of that study NASA has proceeded with detailed design and implementation for the flight experiment. The study effort included the evaluation of technology risks, the extent to which ISS provided unique opportunities to understand them, and the implications of the resulting targeted risks for the experiment design and operational parameters. Based on those objectives and characteristics, ISS safety and integration requirements were examined, experiment concepts developed to address them and their feasibility assessed. This paper will describe the analysis effort and conclusions and present the resulting flight experiment concept. The flight experiment, implemented by NASA and launched in two packages in January and August 2011, integrates the swing bed with supporting elements including electrical power and controls, sensors, cooling, heating, fans, air- and water-conserving functionality, and mechanical packaging structure. It is now on board the ISS awaiting installation and activation.

Centimeter repeatability of the VLBI estimates of European baselines

NASA Technical Reports Server (NTRS)

Rius, Antonio; Zarraoa, Nestor; Sardon, Esther; Ma, Chopo

1992-01-01

In the last three years, the European Geodetic Very Long Baseline Interferometry (VLBI) Network has grown to a total of six fixed antennas placed in Germany, Italy, Spain and Sweden, all equipped with the standard geodetic VLBI instrumentation and data recording systems. During this period of time, several experiments have been carried out using this interferometer providing data of very high quality due to the excellent sensitivity and performance of the European stations. The purpose of this paper is to study the consistency of the VLBI geodetic results on the European baselines with respect to the different degrees of freedom in the analysis procedure. Used to complete this study were both real and simulated data sets, two different software packages (OCCAM 3.0 and CALC 7.4/SOLVE), and a variety of data analysis strategies.

EpiModel: An R Package for Mathematical Modeling of Infectious Disease over Networks.

PubMed

Jenness, Samuel M; Goodreau, Steven M; Morris, Martina

2018-04-01

Package EpiModel provides tools for building, simulating, and analyzing mathematical models for the population dynamics of infectious disease transmission in R. Several classes of models are included, but the unique contribution of this software package is a general stochastic framework for modeling the spread of epidemics on networks. EpiModel integrates recent advances in statistical methods for network analysis (temporal exponential random graph models) that allow the epidemic modeling to be grounded in empirical data on contacts that can spread infection. This article provides an overview of both the modeling tools built into EpiModel , designed to facilitate learning for students new to modeling, and the application programming interface for extending package EpiModel , designed to facilitate the exploration of novel research questions for advanced modelers.

EpiModel: An R Package for Mathematical Modeling of Infectious Disease over Networks

PubMed Central

Jenness, Samuel M.; Goodreau, Steven M.; Morris, Martina

2018-01-01

Package EpiModel provides tools for building, simulating, and analyzing mathematical models for the population dynamics of infectious disease transmission in R. Several classes of models are included, but the unique contribution of this software package is a general stochastic framework for modeling the spread of epidemics on networks. EpiModel integrates recent advances in statistical methods for network analysis (temporal exponential random graph models) that allow the epidemic modeling to be grounded in empirical data on contacts that can spread infection. This article provides an overview of both the modeling tools built into EpiModel, designed to facilitate learning for students new to modeling, and the application programming interface for extending package EpiModel, designed to facilitate the exploration of novel research questions for advanced modelers. PMID:29731699

CSAM Metrology Software Tool

NASA Technical Reports Server (NTRS)

Vu, Duc; Sandor, Michael; Agarwal, Shri

2005-01-01

CSAM Metrology Software Tool (CMeST) is a computer program for analysis of false-color CSAM images of plastic-encapsulated microcircuits. (CSAM signifies C-mode scanning acoustic microscopy.) The colors in the images indicate areas of delamination within the plastic packages. Heretofore, the images have been interpreted by human examiners. Hence, interpretations have not been entirely consistent and objective. CMeST processes the color information in image-data files to detect areas of delamination without incurring inconsistencies of subjective judgement. CMeST can be used to create a database of baseline images of packages acquired at given times for comparison with images of the same packages acquired at later times. Any area within an image can be selected for analysis, which can include examination of different delamination types by location. CMeST can also be used to perform statistical analyses of image data. Results of analyses are available in a spreadsheet format for further processing. The results can be exported to any data-base-processing software.

Semi-parametric regression model for survival data: graphical visualization with R

PubMed Central

2016-01-01

Cox proportional hazards model is a semi-parametric model that leaves its baseline hazard function unspecified. The rationale to use Cox proportional hazards model is that (I) the underlying form of hazard function is stringent and unrealistic, and (II) researchers are only interested in estimation of how the hazard changes with covariate (relative hazard). Cox regression model can be easily fit with coxph() function in survival package. Stratified Cox model may be used for covariate that violates the proportional hazards assumption. The relative importance of covariates in population can be examined with the rankhazard package in R. Hazard ratio curves for continuous covariates can be visualized using smoothHR package. This curve helps to better understand the effects that each continuous covariate has on the outcome. Population attributable fraction is a classic quantity in epidemiology to evaluate the impact of risk factor on the occurrence of event in the population. In survival analysis, the adjusted/unadjusted attributable fraction can be plotted against survival time to obtain attributable fraction function. PMID:28090517

Packaging waste prevention activities: A life cycle assessment of the effects on a regional waste management system.

PubMed

Nessi, Simone; Rigamonti, Lucia; Grosso, Mario

2015-09-01

A life cycle assessment was carried out to evaluate the effects of two packaging waste prevention activities on the overall environmental performance of the integrated municipal waste management system of Lombardia region, Italy. The activities are the use of refined tap water instead of bottled water for household consumption and the substitution of liquid detergents packaged in single-use containers by those distributed 'loose' through self-dispensing systems and refillable containers. A 2020 baseline scenario without waste prevention is compared with different waste prevention scenarios, where the two activities are either separately or contemporaneously implemented, by assuming a complete substitution of the traditional product(s). The results show that, when the prevention activities are carried out effectively, a reduction in total waste generation ranging from 0.14% to 0.66% is achieved, corresponding to a 1-4% reduction of the affected packaging waste fractions (plastics and glass). However, the improvements in the overall environmental performance of the waste management system can be far higher, especially when bottled water is substituted. In this case, a nearly 0.5% reduction of the total waste involves improvements ranging mostly between 5 and 23%. Conversely, for the substitution of single-use packaged liquid detergents (0.14% reduction of the total waste), the achieved improvements do not exceed 3% for nearly all impact categories. © The Author(s) 2015.

Effect of a comprehensive programme to provide universal access to care for sputum-smear-positive multidrug-resistant tuberculosis in China: a before-and-after study.

PubMed

Li, Renzhong; Ruan, Yunzhou; Sun, Qiang; Wang, Xiexiu; Chen, Mingting; Zhang, Hui; Zhao, Yanlin; Zhao, Jin; Chen, Cheng; Xu, Caihong; Su, Wei; Pang, Yu; Cheng, Jun; Chi, Junying; Wang, Qian; Fu, Yunting; Huan, Shitong; Wang, Lixia; Wang, Yu; Chin, Daniel P

2015-04-01

China has a quarter of all patients with multidrug-resistant tuberculosis (MDRTB) worldwide, but less than 5% are in quality treatment programmes. In a before-and-after study we aimed to assess the effect of a comprehensive programme to provide universal access to diagnosis, treatment, and follow-up for MDRTB in four Chinese cities (population 18 million). We designated city-level hospitals in each city to diagnose and treat MDRTB. All patients with smear-positive pulmonary tuberculosis diagnosed in Center for Disease Control (CDC) clinics and hospitals were tested for MDRTB with molecular and conventional drug susceptibility tests. Patients were treated with a 24 month treatment package for MDRTB based on WHO guidelines. Outpatients were referred to the CDC for directly observed therapy. We capped total treatment package cost at US$4644. Insurance reimbursement and project subsidies limited patients' expenses to 10% of charges for services within the package. We compared data from a 12 month programme period (2011) to those from a retrospective survey of all patients with MDRTB diagnosed in the same cities during a baseline period (2006-09). 243 patients were diagnosed with MDRTB or rifampicin-resistant tuberculosis during the 12 month programme period compared with 92 patients (equivalent to 24 per year) during the baseline period. 172 (71%) of 243 individuals were enrolled in the programme. Time from specimen collection for resistance testing to treatment initiation decreased by 90% (from median 139 days [IQR 69-207] to 14 days [10-21]), the proportion of patients who started on appropriate drug regimen increased 2·7 times (from nine [35%] of 26 patients treated to 166 [97%] of 172), and follow-up by the CDC after initial hospitalisation increased 24 times (from one [4%] of 23 patients to 163 [99%] of 164 patients). 6 months after starting treatment, the proportion of patients remaining on treatment increased ten times (from two [8%] of 26 patients to 137 [80%] of 172), and 116 (67%) of 172 patients in the programme period had negative cultures or clinical-radiographic improvement. Patients' expenses for hospital admission after MDRTB diagnosis decreased by 78% (from $796 to $174), reducing the ratio of patients' expenses to annual household income from 17·6% to 3·5% (p<0·0001 for all comparisons between baseline and programme periods). However, 36 (15%) patients did not start or had to discontinue treatment in the programme period because of financial difficulties. This comprehensive programme substantially increased access to diagnosis, quality treatment, and affordable treatment for MDRTB. The programme could help China to achieve universal access to MDRTB care but greater financial risk protection for patients is needed. Bill & Melinda Gates Foundation. Copyright © 2015 Li et al. Open Access article distributed under the terms of CC BY-NC-ND. Published by .. All rights reserved.

Implementation Status of a Ultra-Wideband Receiver Package for the next-generation Very Large Array

NASA Astrophysics Data System (ADS)

Lazio, T. Joseph W.; Velazco, Jose; Soriano, Melissa; Hoppe, Daniel; Russell, Damon; D'Addario, Larry; Long, Ezra; Bowen, James; Samoska, Lorene; Janzen, Andrew

2017-01-01

The next-generation Very Large Array (ngVLA) is a concept for a radio astronomical interferometric array operating in the frequency range 1.2 GHz to 116 GHz and designed to provide substantial improvements in sensitivity, angular resolution, and frequency coverage above the current Very Large Array (VLA). As notional design goals, it would have a continuous frequency coverage of 1.2 GHz to 48 GHz and be 10 times more sensitive than the VLA (and 25 times more sensitive than a 34 m diameter antenna of the Deep Space Network [DSN]). One of the key goals for the ngVLA is to reduce the operating costs without sacrificing performance. We are designing an ultra-wideband receiver package designed to operate across the 8 to 48 GHz frequency range, which can be contrasted to the current VLA, which covers this frequency range with five receiver packages. Reducing the number of receiving systems required to cover the full frequency range would reduce operating costs, and the objective of this work is to develop a prototype integrated feed-receiver package with a sensitivity performance comparable to current narrower band systems on radio telescopes and the DSN, but with a design that meets the requirement of low long-term operational costs. The ultra-wideband receiver package consists of a feed horn, low-noise amplifier (LNA), and down-converters to analog intermediate frequencies. Key features of this design are a quad-ridge feed horn with dielectric loading and a cryogenic receiver with a noise temperature of no more than 30 K at the low end of the band. We will report on the status of this receiver package development including the feed design and LNA implementation. We will present simulation studies of the feed horn including the insertion of dielectric components for improved illumination efficiencies across the band of interest. In addition, we will show experimental results of low-noise 35nm InP HEMT amplifier testing performed across the 8-50 GHz frequency range.Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

Grouping Students and Pacing Instruction. Learning Package No. 15.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on grouping students and pacing instruction is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full…

Language Diversity and Reading Instruction. Learning Package No. 21.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on language diversity and reading instruction is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Observation and Feedback. Learning Package No. 12.

ERIC Educational Resources Information Center

Aiex, Nola Kortner; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on observation and feedback is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Extending the Basal. Learning Package No. 13.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on extending the basal is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Using Skills and Strategies for Effective Learning. Learning Package No. 9.

ERIC Educational Resources Information Center

Hong, Zhang; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on using skills and strategies for effective learning is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the…

Writing Strategies for Gifted Children. Learning Package No. 45.

ERIC Educational Resources Information Center

Hyslop, Nancy; Smith, Carl, Comp.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on writing strategies for gifted children is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Trends and Issues in Reading Education. Learning Package No. 11.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on trends and issues in reading education is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full…

The Changing Perspective in Reading Assessment. Learning Package No. 14.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on changing perspective in reading assessment is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Making Writing Public. Learning Package No. 35.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on making writing public is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

Promoting Language Growth across the Curriculum. Learning Package No. 18.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on language across the curriculum is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of…

Reading Programs for Gifted Readers. Learning Package No. 28.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on reading programs for gifted readers is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Reader Response Theory and Related Instructional Strategies. Learning Package No. 24.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on reader response theory and related instructional strategies is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on…

Children and the Library. Learning Package No. 41.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on children and the library is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving…

Integrating the Language Arts. Learning Package No. 48.

ERIC Educational Resources Information Center

Chao, Han-Hua, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on integrating the language arts is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture…

Spelling and the Writing Process. Learning Package No. 36.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on spelling and the writing process is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture…

Strategic Thinking through Writing. Learning Package No. 37.

ERIC Educational Resources Information Center

Hong, Zhang, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on strategic thinking through writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Using Folk Literature. Learning Package No. 3.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on using folk literature is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Developing Listening and Speaking Skills. Learning Package No. 46.

ERIC Educational Resources Information Center

Hyslop, Nancy, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on developing listening and speaking skills is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Appreciation of Literature. Learning Package No. 49.

ERIC Educational Resources Information Center

Kelly, Dawn, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on appreciating literature is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

Writing Apprehension and the Writing Process. Learning Package No. 32.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on writing apprehension and the writing process is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC…

Involving Parents in the Reading Process. Learning Package No. 7.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on involving parents in the reading process is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full…

Collaborative and Cooperative Learning Techniques. Learning Package No. 6.

ERIC Educational Resources Information Center

Compton, Joe; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on collaborative and cooperative learning techniques is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic;…

Motivating Low Performing Students. Learning Package No. 22.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on motivating low performing students is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text…

Reading in the Content Areas. Learning Package No. 4.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on reading in the content areas is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of…

Television Viewing and Reading. Learning Package No. 23.

ERIC Educational Resources Information Center

Compton, Joe; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on television viewing and reading is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of…

Assessing Performance through Informal Techniques. Learning Package No. 10.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on assessing performance through informal techniques is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic;…

Developing Thinking Skills through Literature. Learning Package No. 19.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on developing thinking skills through literature is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Writing across the Curriculum. Learning Package No. 50.

ERIC Educational Resources Information Center

Kelly, Dawn, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on writing across the curriculum is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture…

Ways To Evaluate Writing. Learning Package No. 47.

ERIC Educational Resources Information Center

Hyslop, Nancy, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on ways to evaluate writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving…

Computers and Writing. Learning Package No. 33.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on computers and writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

Developing Oral Language. Learning Package No. 1.

ERIC Educational Resources Information Center

Hong, Zhang; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on developing oral language is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

16 CFR 502.100 - “Cents-off” representations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of the “cents-off” representation imprinted on the commodity package or label. (3) Each “cents-off” representation imprinted on the package or label is limited to a phrase which reflects that the price marked by..., designated as the “regular price”, clearly and conspicuously on the package or label of the commodity or on a...

Design and Evaluation of an Integrated Online Motion Control Training Package

ERIC Educational Resources Information Center

Buiu, C.

2009-01-01

The aim of this paper is to present an integrated Internet-based package for teaching the fundamentals of motion control by using a wide range of resources: theory, videos, simulators, games, quizzes, and a remote lab. The package is aimed at automation technicians, pupils at vocational schools and students taking an introductory course in…

The Relationship between Reading and Writing. Learning Package No. 40.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on the relationship between reading and writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC…

Expanding Thematic Units beyond the Textbook. Learning Package No. 2.

ERIC Educational Resources Information Center

Chao, Han-Hua; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on expanding thematic units beyond the textbook is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Writing as Exploration. Learning Package No. 31.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on expressive writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

The State System Exercise. Learning Packages in International Relations. Learning Package One.

ERIC Educational Resources Information Center

Coplin, William D.

Learning package 1, the first in a series of four, incorporates a simulation exercise designed to help students in higher education understand factors that affect the stability of the international relations system. Focus is on a "system" perspective in order to show the historical development and to point up the operation of various…

Space shuttle food system study: Food and beverage package development, modification 8S

NASA Technical Reports Server (NTRS)

1976-01-01

A new, highly utile rehydration package was developed for foods in zero gravity. Rehydratable foods will become more acceptable as a result of their overall rehydration capability and improved palatability. This new package design is greatly enhanced by the specified spacecraft condition of atmospheric pressure; the pressure differential between the atmosphere and the package carries the functional responsibility for rapid food rehydration without excess package manipulation by the consumer. Crew acceptance will further be enhanced by less manipulation, hotter rehydration water temperatures and the ability to hold the foods at preparation temperatures until they are consumed.

Packaging Technologies for 500C SiC Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu

2013-01-01

Various SiC electronics and sensors are currently under development for applications in 500C high temperature environments such as hot sections of aerospace engines and the surface of Venus. In order to conduct long-term test and eventually commercialize these SiC devices, compatible packaging technologies for the SiC electronics and sensors are required. This presentation reviews packaging technologies developed for 500C SiC electronics and sensors to address both component and subsystem level packaging needs for high temperature environments. The packaging system for high temperature SiC electronics includes ceramic chip-level packages, ceramic printed circuit boards (PCBs), and edge-connectors. High temperature durable die-attach and precious metal wire-bonding are used in the chip-level packaging process. A high temperature sensor package is specifically designed to address high temperature micro-fabricated capacitive pressure sensors for high differential pressure environments. This presentation describes development of these electronics and sensor packaging technologies, including some testing results of SiC electronics and capacitive pressure sensors using these packaging technologies.

The Model 9977 Radioactive Material Packaging Primer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramczyk, G.

2015-10-09

The Model 9977 Packaging is a single containment drum style radioactive material (RAM) shipping container designed, tested and analyzed to meet the performance requirements of Title 10 the Code of Federal Regulations Part 71. A radioactive material shipping package, in combination with its contents, must perform three functions (please note that the performance criteria specified in the Code of Federal Regulations have alternate limits for normal operations and after accident conditions): Containment, the package must “contain” the radioactive material within it; Shielding, the packaging must limit its users and the public to radiation doses within specified limits; and Subcriticality, themore » package must maintain its radioactive material as subcritical« less

fgui: A Method for Automatically Creating Graphical User Interfaces for Command-Line R Packages

PubMed Central

Hoffmann, Thomas J.; Laird, Nan M.

2009-01-01

The fgui R package is designed for developers of R packages, to help rapidly, and sometimes fully automatically, create a graphical user interface for a command line R package. The interface is built upon the Tcl/Tk graphical interface included in R. The package further facilitates the developer by loading in the help files from the command line functions to provide context sensitive help to the user with no additional effort from the developer. Passing a function as the argument to the routines in the fgui package creates a graphical interface for the function, and further options are available to tweak this interface for those who want more flexibility. PMID:21625291

Active bio-based food-packaging: Diffusion and release of active substances through and from cellulose nanofiber coating toward food-packaging design.

PubMed

Lavoine, Nathalie; Guillard, Valérie; Desloges, Isabelle; Gontard, Nathalie; Bras, Julien

2016-09-20

Cellulose nanofibers (CNFs) were recently investigated for the elaboration of new functional food-packaging materials. Their nanoporous network was especially of interest for controlling the release of active species. Qualitative release studies were conducted, but quantification of the diffusion phenomenon observed when the active species are released from and through CNF coating has not yet been studied. Therefore, this work aims to model CNF-coated paper substrates as controlled release system for food-packaging using release data obtained for two model molecules, namely caffeine and chlorhexidine digluconate. The applied mathematical model - derived from Fickian diffusion - was validated for caffeine only. When the active species chemically interacts with the release device, another model is required as a non-predominantly diffusion-controlled release was observed. From caffeine modeling data, a theoretical active food-packaging material was designed. The use of CNFs as barrier coating was proved to be the ideal material configuration that best meets specifications. Copyright © 2016. Published by Elsevier Ltd.

PAT-1 safety analysis report addendum.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiner, Ruth F.; Schmale, David T.; Kalan, Robert J.

2010-09-01

The Plutonium Air Transportable Package, Model PAT-1, is certified under Title 10, Code of Federal Regulations Part 71 by the U.S. Nuclear Regulatory Commission (NRC) per Certificate of Compliance (CoC) USA/0361B(U)F-96 (currently Revision 9). The purpose of this SAR Addendum is to incorporate plutonium (Pu) metal as a new payload for the PAT-1 package. The Pu metal is packed in an inner container (designated the T-Ampoule) that replaces the PC-1 inner container. The documentation and results from analysis contained in this addendum demonstrate that the replacement of the PC-1 and associated packaging material with the T-Ampoule and associated packaging withmore » the addition of the plutonium metal content are not significant with respect to the design, operating characteristics, or safe performance of the containment system and prevention of criticality when the package is subjected to the tests specified in 10 CFR 71.71, 71.73 and 71.74.« less

Evolution of a modular software network

PubMed Central

Fortuna, Miguel A.; Bonachela, Juan A.; Levin, Simon A.

2011-01-01

“Evolution behaves like a tinkerer” (François Jacob, Science, 1977). Software systems provide a singular opportunity to understand biological processes using concepts from network theory. The Debian GNU/Linux operating system allows us to explore the evolution of a complex network in a unique way. The modular design detected during its growth is based on the reuse of existing code in order to minimize costs during programming. The increase of modularity experienced by the system over time has not counterbalanced the increase in incompatibilities between software packages within modules. This negative effect is far from being a failure of design. A random process of package installation shows that the higher the modularity, the larger the fraction of packages working properly in a local computer. The decrease in the relative number of conflicts between packages from different modules avoids a failure in the functionality of one package spreading throughout the entire system. Some potential analogies with the evolutionary and ecological processes determining the structure of ecological networks of interacting species are discussed. PMID:22106260

The influence of product packaging on young people's palatability rating for RTDS and other alcoholic beverages.

PubMed

Gates, Peter; Copeland, Jan; Stevenson, Richard J; Dillon, Paul

2007-01-01

To investigate the influence of product packaging of ready to drink (RTD), or pre-mixed drinks, and other alcoholic and non-alcoholic beverages on the palatability ratings of adolescents and adults. Respondents were interviewed at their own schools or a campus of the University of NSW. The experiment tested palatability ratings in blind and non-blind conditions with a selection of 12- to 30-year-old Australians (140 adolescents and 210 adults) from seven private schools across NSW and students from the University of NSW and Macquarie University. Beverage palatability was measured utilizing an interval ratio scale from 1 to 7 before and after packaging was presented. Views on whether the beverage packaging was designed to appeal to the participant were also analysed. In general, the alcoholic beverage packaging was thought to be designed to appeal more to adults and palatability ratings significantly increased in the non-blind conditions. In contrast, the Bacardi Breezer packaging was especially palatable to younger participants. Although most alcoholic beverage packaging was not of particular appeal to adolescents, some RTD beverages may be appealing more to adolescents. Unlike other alcoholic products, the difference in palatability ratings for the Bacardi Breezer, from blind to non-blind conditions, was greater for younger participants.

Conceptual waste packaging options for deep borehole disposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Jiann -Cherng; Hardin, Ernest L.

This report presents four concepts for packaging of radioactive waste for disposal in deep boreholes. Two of these are reference-size packages (11 inch outer diameter) and two are smaller (5 inch) for disposal of Cs/Sr capsules. All four have an assumed length of approximately 18.5 feet, which allows the internal length of the waste volume to be 16.4 feet. However, package length and volume can be scaled by changing the length of the middle, tubular section. The materials proposed for use are low-alloy steels, commonly used in the oil-and-gas industry. Threaded connections between packages, and internal threads used to sealmore » the waste cavity, are common oilfield types. Two types of fill ports are proposed: flask-type and internal-flush. All four package design concepts would withstand hydrostatic pressure of 9,600 psi, with factor safety 2.0. The combined loading condition includes axial tension and compression from the weight of a string or stack of packages in the disposal borehole, either during lower and emplacement of a string, or after stacking of multiple packages emplaced singly. Combined loading also includes bending that may occur during emplacement, particularly for a string of packages threaded together. Flask-type packages would be fabricated and heat-treated, if necessary, before loading waste. The fill port would be narrower than the waste cavity inner diameter, so the flask type is suitable for directly loading bulk granular waste, or loading slim waste canisters (e.g., containing Cs/Sr capsules) that fit through the port. The fill port would be sealed with a tapered, threaded plug, with a welded cover plate (welded after loading). Threaded connections between packages and between packages and a drill string, would be standard drill pipe threads. The internal flush packaging concepts would use semi-flush oilfield tubing, which is internally flush but has a slight external upset at the joints. This type of tubing can be obtained with premium, low-profile threaded connections at each end. The internal-flush design would be suitable for loading waste that arrives from the originating site in weld-sealed, cylindrical canisters. Internal, tapered plugs with sealing filet welds would seal the tubing at each end. The taper would be precisely machined onto both the tubing and the plug, producing a metal-metal sealing surface that is compressed as the package is subjected to hydrostatic pressure. The lower plug would be welded in place before loading, while the upper plug would be placed and welded after loading. Conceptual Waste Packaging Options for Deep Borehole Disposal July 30, 2015 iv Threaded connections between packages would allow emplacement singly or in strings screwed together at the disposal site. For emplacement on a drill string the drill pipe would be connected directly into the top package of a string (using an adapter sub to mate with premium semi-flush tubing threads). Alternatively, for wireline emplacement the same package designs could be emplaced singly using a sub with wireline latch, on the upper end. Threaded connections on the bottom of the lowermost package would allow attachment of a crush box, instrumentation, etc.« less

Handling and Emplacement Options for Deep Borehole Disposal Conceptual Design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, John R.; Hardin, Ernest

2015-07-01

This report presents conceptual design information for a system to handle and emplace packages containing radioactive waste, in boreholes 16,400 ft deep or possibly deeper. Its intended use is for a design selection study that compares the costs and risks associated with two emplacement methods: drill-string and wireline emplacement. The deep borehole disposal (DBD) concept calls for siting a borehole (or array of boreholes) that penetrate crystalline basement rock to a depth below surface of about 16,400 ft (5 km). Waste packages would be emplaced in the lower 6,560 ft (2 km) of the borehole, with sealing of appropriate portionsmore » of the upper 9,840 ft (3 km). A deep borehole field test (DBFT) is planned to test and refine the DBD concept. The DBFT is a scientific and engineering experiment, conducted at full-scale, in-situ, without radioactive waste. Waste handling operations are conceptualized to begin with the onsite receipt of a purpose-built Type B shipping cask, that contains a waste package. Emplacement operations begin when the cask is upended over the borehole, locked to a receiving flange or collar. The scope of emplacement includes activities to lower waste packages to total depth, and to retrieve them back to the surface when necessary for any reason. This report describes three concepts for the handling and emplacement of the waste packages: 1) a concept proposed by Woodward-Clyde Consultants in 1983; 2) an updated version of the 1983 concept developed for the DBFT; and 3) a new concept in which individual waste packages would be lowered to depth using a wireline. The systems described here could be adapted to different waste forms, but for design of waste packaging, handling, and emplacement systems the reference waste forms are DOE-owned high- level waste including Cs/Sr capsules and bulk granular HLW from fuel processing. Handling and Emplacement Options for Deep Borehole Disposal Conceptual Design July 23, 2015 iv ACKNOWLEDGEMENTS This report has benefited greatly from review principally by Steve Pye, and also by Paul Eslinger, Dave Sevougian and Jiann Su.« less

An Analysis of Computer Aided Design (CAD) Packages Used at MSFC for the Recent Initiative to Integrate Engineering Activities

NASA Technical Reports Server (NTRS)

Smith, Leigh M.; Parker, Nelson C. (Technical Monitor)

2002-01-01

This paper analyzes the use of Computer Aided Design (CAD) packages at NASA's Marshall Space Flight Center (MSFC). It examines the effectiveness of recent efforts to standardize CAD practices across MSFC engineering activities. An assessment of the roles played by management, designers, analysts, and manufacturers in this initiative will be explored. Finally, solutions are presented for better integration of CAD across MSFC in the future.

Energy Efficiency Opportunities in Highway Lodging Buildings: Development of 50% Energy Savings Design Technology Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Thornton, Brian A.

2010-06-30

This paper presents the process, methodology, and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document that provides specific recommendations for achieving 50% energy savings in roadside motels (highway lodging) above the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004. This 50% solution represents a further step toward realization of the U.S. Department of Energy’s net-zero energy building goal, and go beyond the 30% savings in the Advanced Energy Design Guide series (upon which this work was built). This work can serve as the technical feasibility study for the development of a 50%more » saving Advanced Energy Design Guide for highway lodging, and thus should greatly expedite the development process. The purpose of this design package is to provide user-friendly design assistance to designers, developers, and owners of highway lodging properties. It is intended to encourage energy-efficient design by providing prescriptive energy-efficiency recommendations for each climate zone that attains the 50% the energy savings target. This paper describes the steps that were taken to demonstrate the technical feasibility of achieving a 50% reduction in whole-building energy use with practical and commercially available technologies. The energy analysis results are presented, indicating the recommended energy-efficient measures achieved a national-weighted average energy savings of 55%, relative to Standard 90.1-2004. The cost-effectiveness of the recommended technology package is evaluated and the result shows an average simple payback of 11.3 years.« less

Kinematics Simulation Analysis of Packaging Robot with Joint Clearance

NASA Astrophysics Data System (ADS)

Zhang, Y. W.; Meng, W. J.; Wang, L. Q.; Cui, G. H.

2018-03-01

Considering the influence of joint clearance on the motion error, repeated positioning accuracy and overall position of the machine, this paper presents simulation analysis of a packaging robot — 2 degrees of freedom(DOF) planar parallel robot based on the characteristics of high precision and fast speed of packaging equipment. The motion constraint equation of the mechanism is established, and the analysis and simulation of the motion error are carried out in the case of turning the revolute clearance. The simulation results show that the size of the joint clearance will affect the movement accuracy and packaging efficiency of the packaging robot. The analysis provides a reference point of view for the packaging equipment design and selection criteria and has a great significance on the packaging industry automation.

Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

NASA Technical Reports Server (NTRS)

Wuerer, J. E.; Gran, M.; Held, T. W.

1994-01-01

The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

Design Packing to Safely Mail Raw Spaghetti. Grades 3-5.

ERIC Educational Resources Information Center

Rushton, Erik; Ryan, Emily; Swift, Charles

This activity is designed to build creative skills based on an everyday problem. The scenario that sometimes packages are dropped and letters get bent is used. How can a special delivery be protected from such unfortunate mishaps? Students use their creative skills to determine a way to mail raw spaghetti. A way to safely package the raw spaghetti…

Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

Treesearch

G.R. Johnson; J.N. King

1998-01-01

Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

From Amorphous to Defined: Balancing the Risks of Spiral Development

DTIC Science & Technology

2007-04-30

630 675 720 765 810 855 900 Time (Week) Work started and active PhIt [Requirements,Iter1] : JavelinCalibration work packages1 1 1 Work started and...active PhIt [Technology,Iter1] : JavelinCalibration work packages2 2 2 Work started and active PhIt [Design,Iter1] : JavelinCalibration work packages3 3 3 3...Work started and active PhIt [Manufacturing,Iter1] : JavelinCalibration work packages4 4 Work started and active PhIt [Use,Iter1] : JavelinCalibration

Image dissector control and data system, part 1. [instrument packages and equipment specifications

NASA Technical Reports Server (NTRS)

1974-01-01

A general description of the image dissector control and data system is presented along with detailed design information, operating instructions, and maintenance and trouble-shooting procedures for the four instrumentation packages. The four instrumentation packages include a 90 inch telescope, a simplified telescope module for use on the 90 inch or other telescopes, a photographic plate scanner module which permits the scanning of astronomical photographic plates in the laboratory, and the lunar experiment package module.

Some design constraints required for the use of generic software in embedded systems: Packages which manage abstract dynamic structures without the need for garbage collection

NASA Technical Reports Server (NTRS)

Johnson, Charles S.

1986-01-01

The embedded systems running real-time applications, for which Ada was designed, require their own mechanisms for the management of dynamically allocated storage. There is a need for packages which manage their own internalo structures to control their deallocation as well, due to the performance implications of garbage collection by the KAPSE. This places a requirement upon the design of generic packages which manage generically structured private types built-up from application-defined input types. These kinds of generic packages should figure greatly in the development of lower-level software such as operating systems, schedulers, controllers, and device driver; and will manage structures such as queues, stacks, link-lists, files, and binary multary (hierarchical) trees. Controlled to prevent inadvertent de-designation of dynamic elements, which is implicit in the assignment operation A study was made of the use of limited private type, in solving the problems of controlling the accumulation of anonymous, detached objects in running systems. The use of deallocator prodecures for run-down of application-defined input types during deallocation operations during satellites.

Design Evolution Study - Aging Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. McDaniel

The purpose of this study is to identify options and issues for aging commercial spent nuclear fuel received for disposal at the Yucca Mountain Mined Geologic Repository. Some early shipments of commercial spent nuclear fuel to the repository may be received with high-heat-output (younger) fuel assemblies that will need to be managed to meet thermal goals for emplacement. The capability to age as much as 40,000 metric tons of heavy metal of commercial spent nuclear he1 would provide more flexibility in the design to manage this younger fuel and to decouple waste receipt and waste emplacement. The following potential agingmore » location options are evaluated: (1) Surface aging at four locations near the North Portal; (2) Subsurface aging in the permanent emplacement drifts; and (3) Subsurface aging in a new subsurface area. The following aging container options are evaluated: (1) Complete Waste Package; (2) Stainless Steel inner liner of the waste package; (3) Dual Purpose Canisters; (4) Multi-Purpose Canisters; and (5) New disposable canister for uncanistered commercial spent nuclear fuel. Each option is compared to a ''Base Case,'' which is the expected normal waste packaging process without aging. A Value Engineering approach is used to score each option against nine technical criteria and rank the options. Open issues with each of the options and suggested future actions are also presented. Costs for aging containers and aging locations are evaluated separately. Capital costs are developed for direct costs and distributable field costs. To the extent practical, unit costs are presented. Indirect costs, operating costs, and total system life cycle costs will be evaluated outside of this study. Three recommendations for aging commercial spent nuclear fuel--subsurface, surface, and combined surface and subsurface are presented for further review in the overall design re-evaluation effort. Options that were evaluated but not recommended are: subsurface aging in a new subsurface area (high cost); surface aging in the complete waste package (risk to the waste package and impact on the Waste Handling Facility); and aging in the stainless steel liner (impact on the waste package design and new high risk operations added to the waste packaging process). The selection of a design basis for aging will be made in conjunction with the other design re-evaluation studies.« less

Design of a Minimum Surface-Effect Tendon-Based Microactuator for Micromanipulation

NASA Technical Reports Server (NTRS)

Goldfarb, Michael; Lipsey, James H.

1997-01-01

A piezoelectric (PZT) stack-based actuator was developed to provide a means of actuation with dynamic characteristics appropriate for small-scale manipulation. In particular, the design incorporates a highly nonlinear, large-ratio transmission that provides approximately two orders of magnitude motion amplification from the PZT stack. In addition to motion amplification, the nonlinear transmission was designed via optimization methods to distort the highly non-uniform properties of a piezoelectric actuator so that the achievable actuation force is nearly constant throughout the actuator workspace. The package also includes sensors that independently measure actuator output force and displacement, so that a manipulator structure need not incorporate sensors nor the associated wires. Specifically, the actuator was designed to output a maximum force of at least one Newton through a stroke of at least one millimeter. For purposes of small-scale precision position and/or force control, the actuator/sensor package was designed to eliminate stick-slip friction and backlash. The overall dimensions of the actuator/sensor package are approximately 40 x 65 x 25 mm.

75 FR 56922 - Implementation of the Intelligent Mail Package Barcode

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... the USPS Intelligent Mail strategy. Packages that currently bear barcodes designed to provide delivery... symbology of the barcode; however the elements within the barcode and layout will change. There are several...

16 CFR 1700.5 - Noncomplying package requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conspicuous and easily legible capital letters, shall be in distinct contrast, by typography, layout, color... base on which the package rests as it is designed to be displayed. (4) The declaration shall be in...

16 CFR 1700.5 - Noncomplying package requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... conspicuous and easily legible capital letters, shall be in distinct contrast, by typography, layout, color... base on which the package rests as it is designed to be displayed. (4) The declaration shall be in...

16 CFR 1700.5 - Noncomplying package requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... conspicuous and easily legible capital letters, shall be in distinct contrast, by typography, layout, color... base on which the package rests as it is designed to be displayed. (4) The declaration shall be in...

16 CFR 1700.5 - Noncomplying package requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... conspicuous and easily legible capital letters, shall be in distinct contrast, by typography, layout, color... base on which the package rests as it is designed to be displayed. (4) The declaration shall be in...

DEPLOYMENT OF THE BULK TRITIUM SHIPPING PACKAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, P.

A new Bulk Tritium Shipping Package (BTSP) was designed by the Savannah River National Laboratory to be a replacement for a package that has been used to ship tritium in a variety of content configurations and forms since the early 1970s. The BTSP was certified by the National Nuclear Safety Administration in 2011 for shipments of up to 150 grams of Tritium. Thirty packages were procured and are being delivered to various DOE sites for operational use. This paper summarizes the design features of the BTSP, as well as associated engineered material improvements. Fabrication challenges encountered during production are discussedmore » as well as fielding requirements. Current approved tritium content forms (gas and tritium hydrides), are reviewed, as well as, a new content, tritium contaminated water on molecular sieves. Issues associated with gas generation will also be discussed.« less

pysimm: A Python Package for Simulation of Molecular Systems

NASA Astrophysics Data System (ADS)

Fortunato, Michael; Colina, Coray

pysimm, short for python simulation interface for molecular modeling, is a python package designed to facilitate the structure generation and simulation of molecular systems through convenient and programmatic access to object-oriented representations of molecular system data. This poster presents core features of pysimm and design philosophies that highlight a generalized methodology for incorporation of third-party software packages through API interfaces. The integration with the LAMMPS simulation package is explained to demonstrate this methodology. pysimm began as a back-end python library that powered a cloud-based application on nanohub.org for amorphous polymer simulation. The extension from a specific application library to general purpose simulation interface is explained. Additionally, this poster highlights the rapid development of new applications to construct polymer chains capable of controlling chain morphology such as molecular weight distribution and monomer composition.

Classroom Drama as an Instructional Tool. Learning Package No. 42.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on classroom drama as an instructional tool is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Standard high-reliability integrated circuit logic packaging. [for deep space tracking stations

NASA Technical Reports Server (NTRS)

Slaughter, D. W.

1977-01-01

A family of standard, high-reliability hardware used for packaging digital integrated circuits is described. The design transition from early prototypes to production hardware is covered and future plans are discussed. Interconnections techniques are described as well as connectors and related hardware available at both the microcircuit packaging and main-frame level. General applications information is also provided.

The 9th international symposium on the packaging and transportation of radioactive materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1989-06-01

This three-volume document contains the papers and poster sessions presented at the symposium. Volume 3 contains 87 papers on topics such as structural codes and benchmarking, shipment of plutonium by air, spent fuel shipping, planning, package design and risk assessment, package testing, OCRWN operations experience and regulations. Individual papers were processed separately for the data base. (TEM)

Developing a Decision-Making Plan for the Reading Teacher. Learning Package No. 25.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on developing a decision-making plan for the reading teacher is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on…

Guiding At-Risk Students in the Language Arts Classroom. Learning Package No. 16.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on guiding at-risk students in the language arts classroom is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the…

Peer Response in Learning to Write. Learning Package No. 38.

ERIC Educational Resources Information Center

Chao, Han-Hua, Comp.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on peer response in learning to write is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Organizing the Classroom for an Expansive Reading Curriculum. Learning Package No. 29.

ERIC Educational Resources Information Center

Chao, Han-Hua, Comp.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on classroom organization for an expansive reading curriculum is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the…

Vocabulary Expansion Improves Reading and Learning. Learning Package No. 30.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on the role of vocabulary in reading and learning is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC…

Evaluating the Progress of the School Reading Program. Learning Package No. 17.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on evaluating the progress of the school reading program is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the…

What Works? Summary of Research about Teaching Reading. Learning Package No. 26.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on reasearch about teaching and learning reading is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC…

Language Learning and the Young Child. Learning Package No. 43.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on language learning and the young child is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

The Computer as an Aid to Reading Instruction. Learning Package No. 27.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on computer use in reading is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an overview on the…

Role of Metacognition in Reading To Learn. Learning Package No. 20.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on the role of metacognition in reading to learn is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

A Recruitment Package for Postsecondary Vocational Education. Final From August 1, 1983 to August 31, 1984. Final Report.

ERIC Educational Resources Information Center

Waltz, Freddie C.; And Others

This recruitment package consists of materials designed to assist those individuals who are responsible for recruiting students into postsecondary vocational education programs. The package, which may be used either as a guide to establishing and implementing a new promotional policy or as a resource to use when planning a specific promotional…

Apprenticeship: A Partnership 5. A Learning Activities Package for Women in Apprenticeship.

ERIC Educational Resources Information Center

Fairfax County Public Schools, Falls Church, VA. Office of Adult and Community Education.

This learning activity package is designed to help women prepare for the environment they may find while working in a trade. After completing this package, women should have a realistic idea about how well prepared they are to deal with job conditions that tend to be a problem for tradeswomen. Five units address the following topics: (1)…

Overview of Germany: The Federal Republic and the Federal States. Social Studies, Grades 6-8. Update 2002.

ERIC Educational Resources Information Center

Blankenship, Glen; Tinkler, D. William

This instructional package, consisting of a text and 15 transparencies, is designed for middle school classrooms. The four lessons in the package correlate to the study of world cultures (perspective taking and symbols), geography, and government. The materials in the package focus on national studies and state studies from a comparative United…

Skills Analysis. Workshop Package on Skills Analysis, Skills Audit and Training Needs Analysis.

ERIC Educational Resources Information Center

Hayton, Geoff; And Others

This four-part package is designed to assist Australian workshop leaders running 2-day workshops on skills analysis, skills audit, and training needs analysis. Part A contains information on how to use the package and a list of workshop aims. Parts B, C, and D consist, respectively, of the workshop leader's guide; overhead transparency sheets and…