Sample records for design basic accident

  1. Generation III reactors safety requirements and the design solutions

    NASA Astrophysics Data System (ADS)

    Felten, P.

    2009-03-01

    Nuclear energy's public acceptance, and hence its development, depends on its safety. As a reactor designer, we will first briefly remind the basic safety principles of nuclear reactors' design. We will then show how the industry, and in particular Areva with its EPR, made design evolution in the wake of the Three Miles Island accident in 1979. In particular, for this new generation of reactors, severe accidents are taken into account beyond the standard design basis accidents. Today, Areva's EPR meets all so-called "generation III" safety requirements and was licensed by several nuclear safety authorities in the world. Many innovative solutions are integrated in the EPR, some of which will be introduced here.

  2. KERENA safety concept in the context of the Fukushima accident

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zacharias, T.; Novotny, C.; Bielor, E.

    Within the last three years AREVA NP and E.On KK finalized the basic design of KERENA which is a medium sized innovative boiling water reactor, based on the operational experience of German BWR nuclear power plants (NPPs). It is a generation III reactor design with a net electrical output of about 1250 MW. It combines active safety equipment of service-proven designs with new passive safety components, both safety classified. The passive systems utilize basic laws of physics, such as gravity and natural convection, enabling them to function without electric power. Even actuation of these systems is performed thanks to basicmore » physic laws. The degree of diversity in component and system design, achieved by combining active and passive equipment, results in a very low core damage frequency. The Fukushima accident enhanced the world wide discussion about the safety of operating nuclear power plants. World wide stress tests for operating nuclear power plants are being performed embracing both natural and man made hazards. Beside the assessment of existing power plants, also new designs are analyzed regarding the system response to beyond design base accidents. KERENA's optimal combination of diversified cooling systems (active and passive) allows passing efficiently such tests, with a high level of confidence. This paper describes the passive safety components and the KERENA reactor behavior after a Fukushima like accident. (authors)« less

  3. Rail Safety/Equipment Crashworthiness : Volume 2. Design Guide.

    DOT National Transportation Integrated Search

    1978-07-01

    The second of four volumes, has been prepared to assist design engineers in understanding the basic problems associated with the development of crashworthy interiors of locomotives, cabooses and passenger railcars. Rail vehicle accident conditions ar...

  4. Design criteria for median turn lanes.

    DOT National Transportation Integrated Search

    1978-03-01

    This study was initiated with an extensive literature review and survey of : left-turn median lane practices in Texas cities. The initial phase identified : characteristics of urban arterial accidents, basic design elements, current use of : left-tur...

  5. Design Characteristics of the 224 kW Magdalen Islands VAWT

    NASA Technical Reports Server (NTRS)

    Templin, R. J.

    1979-01-01

    The evolution of the main design features of the Magdalen Islands vertical axis wind turbine (VAWT) is described. The turbine has a rotor height of 120 ft (36.58 m) and diameter 80 ft (24.38 m). It was operated as a joint project between NRC and Hydro-Quebec in grid-coupled mode from July 1977 to July 1978 when the rotor was destroyed in an accident. The accident, although unfortunate, tested the basic integrity of the design in a gross overspeed condition, and the rotor is being rebuilt with minor modifications. Some directions for future VAWT research are suggested.

  6. The New Zealand accident compensation scheme.

    PubMed

    Barter, R W

    1977-05-01

    Reference is made to legislation concerned with the introduction of the New Zealand Accident Compensation Scheme in 1974. The author's experience of the Scheme is based on an exchange visit in 1975. The basic principles are community responsibility and universal entitlement to compensation. Earnings-related benefits are paid to the injured person, and flat-rate payments to non-earners. The Scheme is administered by a three-man Commission with wide responsibilities for accident prevention, rehabilitation services, administration of funds, records, public relations, and an independent Appeals Authority. There have been far reaching consequences on medical practice. The Commission construe the phrase 'Personal Injury by Accident' as damage to the human system which is not designed by the person injured: the implications of such a definition are briefly discussed. The administrative costs of any similar Scheme in the United Kingdom would be enormous and it is doubtful whether the benefits would justify the cost.

  7. The basics of animal biosafety and biocontainment training.

    PubMed

    Pritt, Stacy; Hankenson, F Claire; Wagner, Ted; Tate, Mallory

    2007-06-01

    The threat of biocontamination in an animal facility is best subdued by training. 'Training' is an ambiguous designation that may not be adequately appreciated in all animal facilities. The authors set down concrete training topics and provide practical advice on incorporating the basic principles of facility biosafety training--as well as the precautions and procedures that employees must know in case of accident or emergency--into various training models. They also discuss the current biosafety publications and guidelines and their relationship to biosafety training.

  8. The design of Radiation Accident Registry.

    PubMed

    Chen, Jing; Seely, Bob; Bergman, Lauren; Moir, Deborah

    2011-03-01

    In order to provide effective monitoring and follow-up on the health effects of individuals accidentally exposed to ionising radiation, a Radiation Accident Registry (RAR) has been designed and constructed as an extension to the existing National Dose Registry (NDR). The RAR has basic functions of recording, monitoring and reporting. This type of registry is able to assist responders in preparing for and managing situations during radiological events and in providing effective follow-up on the long-term health effects of persons exposed to ionising radiation. It is especially important to register radiation-exposed people in vulnerable population groups, such as children and pregnant women, to ensure proper long-term health care and protection. Even though radiation accidents are rare, a registry prepared for such accidents could involve a large population and, in some cases, require lifetime monitoring for individuals. One of the most challenging tasks associated with RAR is the assessment of radiation dose resulting from accidents. In some cases, the assessment of radiation doses to individuals could be a process requiring the involvement of various methods. The development of fast and accurate dose assessment tools will remain a long-term challenge associated with the RAR. To meet this challenge, further research activities in radiation dosimetry for individual monitoring are needed.

  9. Development of the simulation system {open_quotes}IMPACT{close_quotes} for analysis of nuclear power plant severe accidents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Naitoh, Masanori; Ujita, Hiroshi; Nagumo, Hiroichi

    1997-07-01

    The Nuclear Power Engineering Corporation (NUPEC) has initiated a long-term program to develop the simulation system {open_quotes}IMPACT{close_quotes} for analysis of hypothetical severe accidents in nuclear power plants. IMPACT employs advanced methods of physical modeling and numerical computation, and can simulate a wide spectrum of senarios ranging from normal operation to hypothetical, beyond-design-basis-accident events. Designed as a large-scale system of interconnected, hierarchical modules, IMPACT`s distinguishing features include mechanistic models based on first principles and high speed simulation on parallel processing computers. The present plan is a ten-year program starting from 1993, consisting of the initial one-year of preparatory work followed bymore » three technical phases: Phase-1 for development of a prototype system; Phase-2 for completion of the simulation system, incorporating new achievements from basic studies; and Phase-3 for refinement through extensive verification and validation against test results and available real plant data.« less

  10. Normal accidents: Living with high-risk technologies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Perrow, Ch.

    1984-01-01

    It was a major nuclear accident, the one at Three Mile Island in 1979, that turned Perrow's attention to accidents in general. A specialist in the sociology of organizations, he soon learned that events at TMI were not simply the result of an engineering failure or the result of operator error; rather, they were a consequence of systems failure. What the author learned from his research into the accident at TMI is that there was no coherent theory of accidents in either the engineering or the social science literature, so he set out to create one. This book discusses themore » science of accident research. Since Perrow is an outsider to all of the many technical fields reviewed in the book, ranging from nuclear power to marine transport to DNA research, experts may challenge his sources and point out his errors. Perrow's central thesis is that accidents are inevitable - that is, they are ''normal'' - in technologies that have two system characteristics that he terms ''interactive complexity'' and ''tight coupling''. Using these concepts, Perrow constructs a theory of systems which he believes to be unique in the literature on accidents and the literature on organizations. His theory concentrates upon the properties of systems themselves, rather than on the errors that owners, designers and operators make in running them. He seeks a more basic explanation than operator error; faulty design or equipment; inadequately trained personnel; or the system is too big, under-financed or mismanaged. Nuclear power in the United States may not survive its current economic and regulatory troubles, but discussion continues. Only a small part of the debate concerns plant safety: economic competitiveness, nuclear arms proliferation and nuclear waste disposal are the salient themes.« less

  11. A Historical Analysis of Crane Mishaps at Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Wolfe, Crystal

    2014-01-01

    Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused or influenced by human factors. Therefore, proper training and understanding of crane safety throughout the workforce is critical. It is important that the engineers designing the cranes, lift planners preparing the lift plans, operators performing the lifts, and training officers conducting the operator training all understand the problems that can happen with cranes and how to ensure the safety of the workforce and equipment being lifted.

  12. Quantitative modelling in cognitive ergonomics: predicting signals passed at danger.

    PubMed

    Moray, Neville; Groeger, John; Stanton, Neville

    2017-02-01

    This paper shows how to combine field observations, experimental data and mathematical modelling to produce quantitative explanations and predictions of complex events in human-machine interaction. As an example, we consider a major railway accident. In 1999, a commuter train passed a red signal near Ladbroke Grove, UK, into the path of an express. We use the Public Inquiry Report, 'black box' data, and accident and engineering reports to construct a case history of the accident. We show how to combine field data with mathematical modelling to estimate the probability that the driver observed and identified the state of the signals, and checked their status. Our methodology can explain the SPAD ('Signal Passed At Danger'), generate recommendations about signal design and placement and provide quantitative guidance for the design of safer railway systems' speed limits and the location of signals. Practitioner Summary: Detailed ergonomic analysis of railway signals and rail infrastructure reveals problems of signal identification at this location. A record of driver eye movements measures attention, from which a quantitative model for out signal placement and permitted speeds can be derived. The paper is an example of how to combine field data, basic research and mathematical modelling to solve ergonomic design problems.

  13. Accident/incident bulletin : calendar year 1996

    DOT National Transportation Integrated Search

    1997-08-01

    Railroads must file monthly accident/incident reports with the Federal Railroad Administrations (FRA) Office of Safety. Bulletin 165 is a summary of accident/incident data reported by 704 railroads for calendar year 1996. There are three basic cat...

  14. Teaching Basic First-Aid Skills against Home Accidents to Children with Autism through Video Modeling

    ERIC Educational Resources Information Center

    Ergenekon, Yasemin

    2012-01-01

    It is known that children with DD can learn first-aid skills and use whenever needed. Applying first-aid skills was taught to three inclusion students with autism through "first-aid skills training package". In the study multiple probe design with probe trials across behaviors was used. The findings indicated that first-aid skills…

  15. Key risk indicators for accident assessment conditioned on pre-crash vehicle trajectory.

    PubMed

    Shi, X; Wong, Y D; Li, M Z F; Chai, C

    2018-08-01

    Accident events are generally unexpected and occur rarely. Pre-accident risk assessment by surrogate indicators is an effective way to identify risk levels and thus boost accident prediction. Herein, the concept of Key Risk Indicator (KRI) is proposed, which assesses risk exposures using hybrid indicators. Seven metrics are shortlisted as the basic indicators in KRI, with evaluation in terms of risk behaviour, risk avoidance, and risk margin. A typical real-world chain-collision accident and its antecedent (pre-crash) road traffic movements are retrieved from surveillance video footage, and a grid remapping method is proposed for data extraction and coordinates transformation. To investigate the feasibility of each indicator in risk assessment, a temporal-spatial case-control is designed. By comparison, Time Integrated Time-to-collision (TIT) performs better in identifying pre-accident risk conditions; while Crash Potential Index (CPI) is helpful in further picking out the severest ones (the near-accident). Based on TIT and CPI, the expressions of KRIs are developed, which enable us to evaluate risk severity with three levels, as well as the likelihood. KRI-based risk assessment also reveals predictive insights about a potential accident, including at-risk vehicles, locations and time. Furthermore, straightforward thresholds are defined flexibly in KRIs, since the impact of different threshold values is found not to be very critical. For better validation, another independent real-world accident sample is examined, and the two results are in close agreement. Hierarchical indicators such as KRIs offer new insights about pre-accident risk exposures, which is helpful for accident assessment and prediction. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Applying STAMP in Accident Analysis

    NASA Technical Reports Server (NTRS)

    Leveson, Nancy; Daouk, Mirna; Dulac, Nicolas; Marais, Karen

    2003-01-01

    Accident models play a critical role in accident investigation and analysis. Most traditional models are based on an underlying chain of events. These models, however, have serious limitations when used for complex, socio-technical systems. Previously, Leveson proposed a new accident model (STAMP) based on system theory. In STAMP, the basic concept is not an event but a constraint. This paper shows how STAMP can be applied to accident analysis using three different views or models of the accident process and proposes a notation for describing this process.

  17. Graphical fault tree analysis for fatal falls in the construction industry.

    PubMed

    Chi, Chia-Fen; Lin, Syuan-Zih; Dewi, Ratna Sari

    2014-11-01

    The current study applied a fault tree analysis to represent the causal relationships among events and causes that contributed to fatal falls in the construction industry. Four hundred and eleven work-related fatalities in the Taiwanese construction industry were analyzed in terms of age, gender, experience, falling site, falling height, company size, and the causes for each fatality. Given that most fatal accidents involve multiple events, the current study coded up to a maximum of three causes for each fall fatality. After the Boolean algebra and minimal cut set analyses, accident causes associated with each falling site can be presented as a fault tree to provide an overview of the basic causes, which could trigger fall fatalities in the construction industry. Graphical icons were designed for each falling site along with the associated accident causes to illustrate the fault tree in a graphical manner. A graphical fault tree can improve inter-disciplinary discussion of risk management and the communication of accident causation to first line supervisors. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Application of Function-Failure Similarity Method to Rotorcraft Component Design

    NASA Technical Reports Server (NTRS)

    Roberts, Rory A.; Stone, Robert E.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the designs that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. During the design of aircraft, a general technique is needed to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to specific components, which are described by their functionality. The failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using this technique, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. The fundamentals of this method were previously introduced for a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

  19. Accident Avoidance Skill Training and Performance Testing. Final Report.

    ERIC Educational Resources Information Center

    Hatterick, G. Richard; Barthurst, James R.

    A two-phased study was conducted to determine the feasibility of training drivers to acquire skills needed to avoid critical conflict motor vehicle accidents, and to develop the procedures and materials necessary for such training. Basic data were derived from indepth accident investigations and task analyses of driver behavior. Principal…

  20. Deriving Function-failure Similarity Information for Failure-free Rotorcraft Component Design

    NASA Technical Reports Server (NTRS)

    Roberts, Rory A.; Stone, Robert B.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the design that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. The aircraft design needs to be passed through a general technique to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to certain components, which are described by their functionality. In turn, the failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using the technique proposed in this paper, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. This method was previously applied to a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

  1. Emotional reactivity: Beware its involvement in traffic accidents.

    PubMed

    M'bailara, Katia; Atzeni, Thierry; Contrand, Benjamin; Derguy, Cyrielle; Bouvard, Manuel-Pierre; Lagarde, Emmanuel; Galéra, Cédric

    2018-04-01

    Reducing risk attributable to traffic accidents is a public health challenge. Research into risk factors in the area is now moving towards identification of the psychological factors involved, particularly emotional states. The aim of this study was to evaluate the link between emotional reactivity and responsibility in road traffic accidents. We hypothesized that the more one's emotional reactivity is disturbed, the greater the likelihood of being responsible for a traffic accident. This case-control study was based on a sample of 955 drivers injured in a motor vehicle crash. Responsibility levels were determined with a standardized method adapted from the quantitative Robertson and Drummer crash responsibility instrument. Emotional reactivity was assessed with the MATHYS. Hierarchical cluster analysis discriminated four distinctive driver's emotional reactivity profiles: basic emotional reactivity (54%), mild emotional hyper-reactivity (29%), emotional hyper-reactivity (11%) and emotional hypo-reactivity (6%). Drivers who demonstrated emotional hypo-reactivity had a 2.3-fold greater risk of being responsible for a traffic accident than those with basic emotional reactivity. Drivers' responsibility in traffic accidents depends on their emotional status. The latter can change the ability of drivers, modifying their behavior and thus increasing their propensity to exhibit risk behavior and to cause traffic accidents. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Ergonomics in an oral pathology laboratory: Back to basics in microscopy

    PubMed Central

    Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

    2014-01-01

    Ergonomics is simply a science focused on “study of work” to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms “ergonomics”, “pathology laboratory”, “microscope”. All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use. PMID:25364157

  3. Predictors of Suicide and Accident Death in the Army Study to Assess Risk and Resilience in Servicemembers (Army STARRS)

    PubMed Central

    Schoenbaum, Michael; Kessler, Ronald C.; Gilman, Stephen E.; Colpe, Lisa J.; Heeringa, Steven G.; Stein, Murray B.; Ursano, Robert J.; Cox, Kenneth L.

    2014-01-01

    IMPORTANCE The Army Study to Assess Risk and Resilience in Servicemembers (Army STARRS) is a multicomponent study designed to generate actionable recommendations to reduce Army suicides and increase knowledge of risk and resilience factors for suicidality. OBJECTIVES To present data on prevalence, trends, and basic sociodemographic and Army experience correlates of suicides and accident deaths among active duty Regular Army soldiers between January 1, 2004, and December 31, 2009, and thereby establish a foundation for future Army STARRS investigations. DESIGN, SETTING, AND PARTICIPANTS Analysis of trends and predictors of suicide and accident deaths using Army and Department of Defense administrative data systems. Participants were all members of the US Regular Army serving at any time between 2004 and 2009. MAIN OUTCOMES AND MEASURES Death by suicide or accident during active Army service. RESULTS The suicide rate rose between 2004 and 2009 among never deployed and currently and previously deployed Regular Army soldiers. The accident death rate fell sharply among currently deployed soldiers, remained constant among the previously deployed, and trended upward among the never deployed. Increased suicide risk was associated with being a man (or a woman during deployment), white race/ethnicity, junior enlisted rank, recent demotion, and current or previous deployment. Sociodemographic and Army experience predictors were generally similar for suicides and accident deaths. Time trends in these predictors and in the Army’s increased use of accession waivers (which relaxed some qualifications for new soldiers) do not explain the rise in Army suicides. CONCLUSIONS AND RELEVANCE Predictors of Army suicides were largely similar to those reported elsewhere for civilians, although some predictors distinct to Army service emerged that deserve more in-depth analysis. The existence of a time trend in suicide risk among never-deployed soldiers argues indirectly against the view that exposure to combat-related trauma is the exclusive cause of the increase in Army suicides. PMID:24590048

  4. Utilization of accident databases and fuzzy sets to estimate frequency of HazMat transport accidents.

    PubMed

    Qiao, Yuanhua; Keren, Nir; Mannan, M Sam

    2009-08-15

    Risk assessment and management of transportation of hazardous materials (HazMat) require the estimation of accident frequency. This paper presents a methodology to estimate hazardous materials transportation accident frequency by utilizing publicly available databases and expert knowledge. The estimation process addresses route-dependent and route-independent variables. Negative binomial regression is applied to an analysis of the Department of Public Safety (DPS) accident database to derive basic accident frequency as a function of route-dependent variables, while the effects of route-independent variables are modeled by fuzzy logic. The integrated methodology provides the basis for an overall transportation risk analysis, which can be used later to develop a decision support system.

  5. Annual statistical report 2008 : based on data from CARE/EC

    DOT National Transportation Integrated Search

    2008-10-31

    This Annual Statistical Report provides the basic characteristics of road accidents in 19 member states of : the European Union for the period 1997-2006, on the basis of data collected and processed in the CARE : database, the Community Road Accident...

  6. Sacramento-Watt Avenue transit priority and mobility enhancement demonstration project: phase III evaluation report

    DOT National Transportation Integrated Search

    2001-02-01

    The Minnesota data system includes the following basic files: Accident data (Accident File, Vehicle File, Occupant File); Roadlog File; Reference Post File; Traffic File; Intersection File; Bridge (Structures) File; and RR Grade Crossing File. For ea...

  7. Fukushima Health Management Survey and Related Issues.

    PubMed

    Yasumura, Seiji; Abe, Masafumi

    2017-03-01

    After the Great East Japan Earthquake on March 11, 2011, the Tokyo Electric Power Company Fukushima Daiichi Nuclear Power Plant accident occurred. The Fukushima prefectural government decided to launch the Fukushima Health Management Survey; Fukushima Medical University was entrusted to design and implement the survey. The survey process and development is described from the standpoint of its background and aim. An overview of the basic survey and 4 detailed surveys is briefly provided. Issues related to the survey are discussed from the perspective of supporting the Fukushima residents.

  8. Highway Safety Information System guidebook for the Minnesota state data files. Volume 1 : SAS file formats

    DOT National Transportation Integrated Search

    2001-02-01

    The Minnesota data system includes the following basic files: Accident data (Accident File, Vehicle File, Occupant File); Roadlog File; Reference Post File; Traffic File; Intersection File; Bridge (Structures) File; and RR Grade Crossing File. For ea...

  9. Measuring driver satisfaction with an urban arterial before and after deployment of an adaptive timing signal system

    DOT National Transportation Integrated Search

    2001-02-01

    The Minnesota data system includes the following basic files: Accident data (Accident File, Vehicle File, Occupant File); Roadlog File; Reference Post File; Traffic File; Intersection File; Bridge (Structures) File; and RR Grade Crossing File. For ea...

  10. 49 CFR Appendix B to Part 219 - Designation of Laboratory for Post-Accident Toxicological Testing

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Designation of Laboratory for Post-Accident.... 219, App. B Appendix B to Part 219—Designation of Laboratory for Post-Accident Toxicological Testing The following laboratory is currently designated to conduct post-accident toxicological analysis under...

  11. 49 CFR 219.205 - Specimen collection and handling.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONTROL OF ALCOHOL AND DRUG USE Post-Accident Toxicological Testing... railroads and employees of test results, it is necessary to obtain basic information concerning the accident.... Specimens must be shipped as soon as possible by pre-paid air express or air freight (or other means...

  12. Condensation model for the ESBWR passive condensers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Revankar, S. T.; Zhou, W.; Wolf, B.

    2012-07-01

    In the General Electric's Economic simplified boiling water reactor (GE-ESBWR) the passive containment cooling system (PCCS) plays a major role in containment pressure control in case of an loss of coolant accident. The PCCS condenser must be able to remove sufficient energy from the reactor containment to prevent containment from exceeding its design pressure following a design basis accident. There are three PCCS condensation modes depending on the containment pressurization due to coolant discharge; complete condensation, cyclic venting and flow through mode. The present work reviews the models and presents model predictive capability along with comparison with existing data frommore » separate effects test. The condensation models in thermal hydraulics code RELAP5 are also assessed to examine its application to various flow modes of condensation. The default model in the code predicts complete condensation well, and basically is Nusselt solution. The UCB model predicts through flow well. None of condensation model in RELAP5 predict complete condensation, cyclic venting, and through flow condensation consistently. New condensation correlations are given that accurately predict all three modes of PCCS condensation. (authors)« less

  13. Reliability and Probabilistic Risk Assessment - How They Play Together

    NASA Technical Reports Server (NTRS)

    Safie, Fayssal; Stutts, Richard; Huang, Zhaofeng

    2015-01-01

    Since the Space Shuttle Challenger accident in 1986, NASA has extensively used probabilistic analysis methods to assess, understand, and communicate the risk of space launch vehicles. Probabilistic Risk Assessment (PRA), used in the nuclear industry, is one of the probabilistic analysis methods NASA utilizes to assess Loss of Mission (LOM) and Loss of Crew (LOC) risk for launch vehicles. PRA is a system scenario based risk assessment that uses a combination of fault trees, event trees, event sequence diagrams, and probability distributions to analyze the risk of a system, a process, or an activity. It is a process designed to answer three basic questions: 1) what can go wrong that would lead to loss or degraded performance (i.e., scenarios involving undesired consequences of interest), 2) how likely is it (probabilities), and 3) what is the severity of the degradation (consequences). Since the Challenger accident, PRA has been used in supporting decisions regarding safety upgrades for launch vehicles. Another area that was given a lot of emphasis at NASA after the Challenger accident is reliability engineering. Reliability engineering has been a critical design function at NASA since the early Apollo days. However, after the Challenger accident, quantitative reliability analysis and reliability predictions were given more scrutiny because of their importance in understanding failure mechanism and quantifying the probability of failure, which are key elements in resolving technical issues, performing design trades, and implementing design improvements. Although PRA and reliability are both probabilistic in nature and, in some cases, use the same tools, they are two different activities. Specifically, reliability engineering is a broad design discipline that deals with loss of function and helps understand failure mechanism and improve component and system design. PRA is a system scenario based risk assessment process intended to assess the risk scenarios that could lead to a major/top undesirable system event, and to identify those scenarios that are high-risk drivers. PRA output is critical to support risk informed decisions concerning system design. This paper describes the PRA process and the reliability engineering discipline in detail. It discusses their differences and similarities and how they work together as complementary analyses to support the design and risk assessment processes. Lessons learned, applications, and case studies in both areas are also discussed in the paper to demonstrate and explain these differences and similarities.

  14. Investigation of a reinforcement-based toilet training procedure for children with autism.

    PubMed

    Cicero, Frank R; Pfadt, Al

    2002-01-01

    Independent toileting is an important developmental skill which individuals with developmental disabilities often find a challenge to master. Effective toilet training interventions have been designed which rely on a combination of basic operant principles of positive reinforcement and punishment. In the present study, the effectiveness of a reinforcement-based toilet training intervention was investigated with three children with a diagnosis of autism. Procedures included a combination of positive reinforcement, graduated guidance, scheduled practice trials and forward prompting. Results indicated that all procedures were implemented in response to urination accidents. A three participants reduced urination accidents to zero and learned to spontaneously request use of the bathroom within 7-11 days of training. Gains were maintained over 6-month and 1-year follow-ups. Findings suggest that the proposed procedure is an effective and rapid method of toilet training, which can be implemented within a structured school setting with generalization to the home environment.

  15. [Determinant factors and conduct in post-accident with biological material among pre-hospital professionals].

    PubMed

    Paiva, Maria Henriqueta Rocha Siqueira; Oliveira, Adriana Cristina

    2011-01-01

    This transversal study was carried out with a multiprofessional team in the pre-hospital care in Minas Gerais, Brazil. It aimed to estimate the incidence of occupational accidents by exposure to biological material and post-accidents conductsta. Descriptive analysis and logistic regression were used. Incidence of accidents was 19.8%: 39,1% perforating-cutting materials and 56.5% body fluids. Doctors (33.3%) and drivers (24.0%) were most involved. Inadequate subsequent measures were highly prevalent: no medical assessment (69.6%), no work accident communication issued (91.3%), no measures (52.2%) and no serological follow-up (52.2%). Variables associated with accidents were: age >31 years old (OR = 3,02; IC95%: 1,25 - 7,33; p = 0,014) and working in basic support units (OR = 5,36; IC95%: 1,51 19,08; p = 0,010). The implementation of post-accidents protocols is suggested in order to reduce accidents and under-notification, and increase post-accident follow-up.

  16. Advanced automated glass cockpit certification: Being wary of human factors

    NASA Technical Reports Server (NTRS)

    Amalberti, Rene; Wilbaux, Florence

    1994-01-01

    This paper presents some facets of the French experience with human factors in the process of certification of advanced automated cockpits. Three types of difficulties are described: first, the difficulties concerning the hotly debated concept of human error and its non-linear relationship to risk of accident; a typology of errors to be taken into account in the certification process is put forward to respond to this issue. Next, the difficulties connected to the basically gradual and evolving nature of pilot expertise on a given type of aircraft, which contrasts with the immediate and definitive style of certifying systems. The last difficulties to be considered are those related to the goals of certification itself on these new aircraft and the status of findings from human factor analyses (in particular, what should be done with disappointing results, how much can the changes induced by human factors investigation economically affect aircraft design, how many errors do we need to accumulate before we revise the system, what should be remedied when human factor problems are discovered at the certification stage: the machine? pilot training? the rules? or everything?). The growth of advanced-automated glass cockpits has forced the international aeronautical community to pay more attention to human factors during the design phase, the certification phase and pilot training. The recent creation of a human factor desk at the DGAC-SFACT (Official French services) is a direct consequence of this. The paper is divided into three parts. Part one debates human error and its relationship with system design and accident risk. Part two describes difficulties connected to the basically gradual and evolving nature of pilot expertise on a given type of aircraft, which contrasts with the immediate and definitive style of certifying systems. Part three focuses on concrete outcomes of human factors for certification purposes.

  17. Inadequate Self-Discipline as a Causal Factor in Human Error Accidents

    DTIC Science & Technology

    1991-03-01

    reasons for the effectiveness of the stimuli or incentives used are unknown. Moreover, Gebers and Peck (1987) conclude on the basis of a random sample...Research. 13, 141-156. 234 Gebers , M. A., & Peck, R. C. (1987). Basic California traffic conviction and accident record facts. (Report No. CAL-DMV- RSS

  18. The design of the intelligent monitoring system for dam safety

    NASA Astrophysics Data System (ADS)

    Yuan, Chun-qiao; Jiang, Chen-guang; Wang, Guo-hui

    2008-12-01

    Being a vital manmade water-control structure, a dam plays a very important role in the living and production of human being. To make a dam run safely, the best design and the superior construction quality are paramount; moreover, with working periods increasing, various dynamic, alternative and bad loads generate little by little various distortions on the dam structure inevitably, which shall lead to potential safety problems or further a disaster (dam burst). There are many signs before the occurrence of a dam accident, so the timely and effective surveying on the distortion of a dam is important. On the basis of the cause supra, two intelligent (automatic) monitoring systems about the dam's safety based on the RTK-GPS technology and the measuring robot has been developed. The basic principle, monitoring method and monitoring process of these two intelligent (automatic) monitoring systems are introduced. It presents examples of monitor and puts forward the basic rule of dam warning based on data of actual monitor.

  19. The kinetics of aerosol particle formation and removal in NPP severe accidents

    NASA Astrophysics Data System (ADS)

    Zatevakhin, Mikhail A.; Arefiev, Valentin K.; Semashko, Sergey E.; Dolganov, Rostislav A.

    2016-06-01

    Severe Nuclear Power Plant (NPP) accidents are accompanied by release of a massive amount of energy, radioactive products and hydrogen into the atmosphere of the NPP containment. A valid estimation of consequences of such accidents can only be carried out through the use of the integrated codes comprising a description of the basic processes which determine the consequences. A brief description of a coupled aerosol and thermal-hydraulic code to be used for the calculation of the aerosol kinetics within the NPP containment in case of a severe accident is given. The code comprises a KIN aerosol unit integrated into the KUPOL-M thermal-hydraulic code. Some features of aerosol behavior in severe NPP accidents are briefly described.

  20. The kinetics of aerosol particle formation and removal in NPP severe accidents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zatevakhin, Mikhail A.; Arefiev, Valentin K.; Semashko, Sergey E.

    2016-06-08

    Severe Nuclear Power Plant (NPP) accidents are accompanied by release of a massive amount of energy, radioactive products and hydrogen into the atmosphere of the NPP containment. A valid estimation of consequences of such accidents can only be carried out through the use of the integrated codes comprising a description of the basic processes which determine the consequences. A brief description of a coupled aerosol and thermal–hydraulic code to be used for the calculation of the aerosol kinetics within the NPP containment in case of a severe accident is given. The code comprises a KIN aerosol unit integrated into themore » KUPOL-M thermal–hydraulic code. Some features of aerosol behavior in severe NPP accidents are briefly described.« less

  1. Normal accidents: human error and medical equipment design.

    PubMed

    Dain, Steven

    2002-01-01

    High-risk systems, which are typical of our technologically complex era, include not just nuclear power plants but also hospitals, anesthesia systems, and the practice of medicine and perfusion. In high-risk systems, no matter how effective safety devices are, some types of accidents are inevitable because the system's complexity leads to multiple and unexpected interactions. It is important for healthcare providers to apply a risk assessment and management process to decisions involving new equipment and procedures or staffing matters in order to minimize the residual risks of latent errors, which are amenable to correction because of the large window of opportunity for their detection. This article provides an introduction to basic risk management and error theory principles and examines ways in which they can be applied to reduce and mitigate the inevitable human errors that accompany high-risk systems. The article also discusses "human factor engineering" (HFE), the process which is used to design equipment/ human interfaces in order to mitigate design errors. The HFE process involves interaction between designers and endusers to produce a series of continuous refinements that are incorporated into the final product. The article also examines common design problems encountered in the operating room that may predispose operators to commit errors resulting in harm to the patient. While recognizing that errors and accidents are unavoidable, organizations that function within a high-risk system must adopt a "safety culture" that anticipates problems and acts aggressively through an anonymous, "blameless" reporting mechanism to resolve them. We must continuously examine and improve the design of equipment and procedures, personnel, supplies and materials, and the environment in which we work to reduce error and minimize its effects. Healthcare providers must take a leading role in the day-to-day management of the "Perioperative System" and be a role model in promoting a culture of safety in their organizations.

  2. Criticality Safety Basics for INL FMHs and CSOs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    V. L. Putman

    2012-04-01

    Nuclear power is a valuable and efficient energy alternative in our energy-intensive society. However, material that can generate nuclear power has properties that require this material be handled with caution. If improperly handled, a criticality accident could result, which could severely harm workers. This document is a modular self-study guide about Criticality Safety Principles. This guide's purpose it to help you work safely in areas where fissionable nuclear materials may be present, avoiding the severe radiological and programmatic impacts of a criticality accident. It is designed to stress the fundamental physical concepts behind criticality controls and the importance of criticalitymore » safety when handling fissionable materials outside nuclear reactors. This study guide was developed for fissionable-material-handler and criticality-safety-officer candidates to use with related web-based course 00INL189, BEA Criticality Safety Principles, and to help prepare for the course exams. These individuals must understand basic information presented here. This guide may also be useful to other Idaho National Laboratory personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. This guide also includes additional information that will not be included in 00INL189 tests. The additional information is in appendices and paragraphs with headings that begin with 'Did you know,' or with, 'Been there Done that'. Fissionable-material-handler and criticality-safety-officer candidates may review additional information at their own discretion. This guide is revised as needed to reflect program changes, user requests, and better information. Issued in 2006, Revision 0 established the basic text and integrated various programs from former contractors. Revision 1 incorporates operation and program changes implemented since 2006. It also incorporates suggestions, clarifications, and additional information from readers and from personnel who took course 00INL189. Revision 1 also completely reorganized the training to better emphasize physical concepts behind the criticality controls that fissionable material handlers and criticality safety officers must understand. The reorganization is based on and consistent with changes made to course 00INL189 due to a review of course exam results and to discussions with personnel who conduct area-specific training.« less

  3. Epidemiology of occupational accidents in iran based on social security organization database.

    PubMed

    Mehrdad, Ramin; Seifmanesh, Shahdokht; Chavoshi, Farzaneh; Aminian, Omid; Izadi, Nazanin

    2014-01-01

    Today, occupational accidents are one of the most important problems in industrial world. Due to lack of appropriate system for registration and reporting, there is no accurate statistics of occupational accidents all over the world especially in developing countries. The aim of this study is epidemiological assessment of occupational accidents in Iran. Information of available occupational accidents in Social Security Organization was extracted from accident reporting and registration forms. In this cross-sectional study, gender, age, economic activity, type of accident and injured body part in 22158 registered accidents during 2008 were described. The occupational accidents rate was 253 in 100,000 workers in 2008. 98.2% of injured workers were men. The mean age of injured workers was 32.07 ± 9.12 years. The highest percentage belonged to age group of 25-34 years old. In our study, most of the accidents occurred in basic metals industry, electrical and non-electrical machines and construction industry. Falling down from height and crush injury were the most prevalent accidents. Upper and lower extremities were the most common injured body parts. Due to the high rate of accidents in metal and construction industries, engineering controls, the use of appropriate protective equipment and safety worker training seems necessary.

  4. Epidemiology of Occupational Accidents in Iran Based on Social Security Organization Database

    PubMed Central

    Mehrdad, Ramin; Seifmanesh, Shahdokht; Chavoshi, Farzaneh; Aminian, Omid; Izadi, Nazanin

    2014-01-01

    Background: Background: Today, occupational accidents are one of the most important problems in industrial world. Due to lack of appropriate system for registration and reporting, there is no accurate statistics of occupational accidents all over the world especially in developing countries. Objectives: The aim of this study is epidemiological assessment of occupational accidents in Iran. Materials and Methods: Information of available occupational accidents in Social Security Organization was extracted from accident reporting and registration forms. In this cross-sectional study, gender, age, economic activity, type of accident and injured body part in 22158 registered accidents during 2008 were described. Results: The occupational accidents rate was 253 in 100,000 workers in 2008. 98.2% of injured workers were men. The mean age of injured workers was 32.07 ± 9.12 years. The highest percentage belonged to age group of 25-34 years old. In our study, most of the accidents occurred in basic metals industry, electrical and non-electrical machines and construction industry. Falling down from height and crush injury were the most prevalent accidents. Upper and lower extremities were the most common injured body parts. Conclusion: Due to the high rate of accidents in metal and construction industries, engineering controls, the use of appropriate protective equipment and safety worker training seems necessary. PMID:24719699

  5. 14 CFR 205.3 - Basic requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... classes of aircraft, or the specific aircraft by FAA or foreign government registration number, with... insurance that list aircraft by government registration number, the policy or self-insurance plan shall... REGULATIONS AIRCRAFT ACCIDENT LIABILITY INSURANCE § 205.3 Basic requirements. (a) A U.S. or foreign direct air...

  6. 14 CFR 205.3 - Basic requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... classes of aircraft, or the specific aircraft by FAA or foreign government registration number, with... insurance that list aircraft by government registration number, the policy or self-insurance plan shall... REGULATIONS AIRCRAFT ACCIDENT LIABILITY INSURANCE § 205.3 Basic requirements. (a) A U.S. or foreign direct air...

  7. 14 CFR 205.3 - Basic requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... classes of aircraft, or the specific aircraft by FAA or foreign government registration number, with... insurance that list aircraft by government registration number, the policy or self-insurance plan shall... REGULATIONS AIRCRAFT ACCIDENT LIABILITY INSURANCE § 205.3 Basic requirements. (a) A U.S. or foreign direct air...

  8. 14 CFR 205.3 - Basic requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... classes of aircraft, or the specific aircraft by FAA or foreign government registration number, with... insurance that list aircraft by government registration number, the policy or self-insurance plan shall... REGULATIONS AIRCRAFT ACCIDENT LIABILITY INSURANCE § 205.3 Basic requirements. (a) A U.S. or foreign direct air...

  9. 14 CFR 205.3 - Basic requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... classes of aircraft, or the specific aircraft by FAA or foreign government registration number, with... insurance that list aircraft by government registration number, the policy or self-insurance plan shall... REGULATIONS AIRCRAFT ACCIDENT LIABILITY INSURANCE § 205.3 Basic requirements. (a) A U.S. or foreign direct air...

  10. Classification and reduction of pilot error

    NASA Technical Reports Server (NTRS)

    Rogers, W. H.; Logan, A. L.; Boley, G. D.

    1989-01-01

    Human error is a primary or contributing factor in about two-thirds of commercial aviation accidents worldwide. With the ultimate goal of reducing pilot error accidents, this contract effort is aimed at understanding the factors underlying error events and reducing the probability of certain types of errors by modifying underlying factors such as flight deck design and procedures. A review of the literature relevant to error classification was conducted. Classification includes categorizing types of errors, the information processing mechanisms and factors underlying them, and identifying factor-mechanism-error relationships. The classification scheme developed by Jens Rasmussen was adopted because it provided a comprehensive yet basic error classification shell or structure that could easily accommodate addition of details on domain-specific factors. For these purposes, factors specific to the aviation environment were incorporated. Hypotheses concerning the relationship of a small number of underlying factors, information processing mechanisms, and error types types identified in the classification scheme were formulated. ASRS data were reviewed and a simulation experiment was performed to evaluate and quantify the hypotheses.

  11. The Fukushima Health Management Survey: estimation of external doses to residents in Fukushima Prefecture

    NASA Astrophysics Data System (ADS)

    Ishikawa, Tetsuo; Yasumura, Seiji; Ozasa, Kotaro; Kobashi, Gen; Yasuda, Hiroshi; Miyazaki, Makoto; Akahane, Keiichi; Yonai, Shunsuke; Ohtsuru, Akira; Sakai, Akira; Sakata, Ritsu; Kamiya, Kenji; Abe, Masafumi

    2015-08-01

    The Fukushima Health Management Survey (including the Basic Survey for external dose estimation and four detailed surveys) was launched after the Fukushima Dai-ichi Nuclear Power Plant accident. The Basic Survey consists of a questionnaire that asks Fukushima Prefecture residents about their behavior in the first four months after the accident; and responses to the questionnaire have been returned from many residents. The individual external doses are estimated by using digitized behavior data and a computer program that included daily gamma ray dose rate maps drawn after the accident. The individual external doses of 421,394 residents for the first four months (excluding radiation workers) had a distribution as follows: 62.0%, <1 mSv 94.0%, <2 mSv 99.4%, <3 mSv. The arithmetic mean and maximum for the individual external doses were 0.8 and 25 mSv, respectively. While most dose estimation studies were based on typical scenarios of evacuation and time spent inside/outside, the Basic Survey estimated doses considering individually different personal behaviors. Thus, doses for some individuals who did not follow typical scenarios could be revealed. Even considering such extreme cases, the estimated external doses were generally low and no discernible increased incidence of radiation-related health effects is expected.

  12. The Fukushima Health Management Survey: estimation of external doses to residents in Fukushima Prefecture

    PubMed Central

    Ishikawa, Tetsuo; Yasumura, Seiji; Ozasa, Kotaro; Kobashi, Gen; Yasuda, Hiroshi; Miyazaki, Makoto; Akahane, Keiichi; Yonai, Shunsuke; Ohtsuru, Akira; Sakai, Akira; Sakata, Ritsu; Kamiya, Kenji; Abe, Masafumi

    2015-01-01

    The Fukushima Health Management Survey (including the Basic Survey for external dose estimation and four detailed surveys) was launched after the Fukushima Dai-ichi Nuclear Power Plant accident. The Basic Survey consists of a questionnaire that asks Fukushima Prefecture residents about their behavior in the first four months after the accident; and responses to the questionnaire have been returned from many residents. The individual external doses are estimated by using digitized behavior data and a computer program that included daily gamma ray dose rate maps drawn after the accident. The individual external doses of 421,394 residents for the first four months (excluding radiation workers) had a distribution as follows: 62.0%, <1 mSv; 94.0%, <2 mSv; 99.4%, <3 mSv. The arithmetic mean and maximum for the individual external doses were 0.8 and 25 mSv, respectively. While most dose estimation studies were based on typical scenarios of evacuation and time spent inside/outside, the Basic Survey estimated doses considering individually different personal behaviors. Thus, doses for some individuals who did not follow typical scenarios could be revealed. Even considering such extreme cases, the estimated external doses were generally low and no discernible increased incidence of radiation-related health effects is expected. PMID:26239643

  13. Some Implications of the Three Mile Island Accident for LMFBR Safety and Licensing: The Design Basis Issue

    DTIC Science & Technology

    1980-08-01

    metal fast breeder reactor (LMFBR) design. It also re-examines the impact of the accident at Three Mile Island on the design basis concept, and how...Water Reactors : ImpZications for Liquid MetaZ Fast Breeder Reactors , by W. E. Kastenberg and K. A. Solomon, July 1979. v SUNMARY The 1979 accident...the liquid metal fast breeder reactor (LMFBR). This Note assesses the impact of the TMI-2 accident on the LMFBR. Specifically, it: o Reviews the

  14. Study on the Application of the Kent Index Method on the Risk Assessment of Disastrous Accidents in Subway Engineering

    PubMed Central

    Lu, Hao; Wang, Mingyang; Yang, Baohuai; Rong, Xiaoli

    2013-01-01

    With the development of subway engineering, according to uncertain factors and serious accidents involved in the construction of subways, implementing risk assessment is necessary and may bring a number of benefits for construction safety. The Kent index method extensively used in pipeline construction is improved to make risk assessment much more practical for the risk assessment of disastrous accidents in subway engineering. In the improved method, the indexes are divided into four categories, namely, basic, design, construction, and consequence indexes. In this study, a risk assessment model containing four kinds of indexes is provided. Three kinds of risk occurrence modes are listed. The probability index model which considers the relativity of the indexes is established according to the risk occurrence modes. The model provides the risk assessment process through the fault tree method and has been applied in the risk assessment of Nanjing subway's river-crossing tunnel construction. Based on the assessment results, the builders were informed of what risks should be noticed and what they should do to avoid the risks. The need for further research is discussed. Overall, this method may provide a tool for the builders, and improve the safety of the construction. PMID:23710136

  15. The impact of vessel speed reduction on port accidents.

    PubMed

    Chang, Young-Tae; Park, Hyosoo

    2016-03-19

    Reduced-speed zones (RSZs) have been designated across the world to control emissions from ships and prevent mammal strikes. While some studies have examined the effectiveness of speed reduction on emissions and mammal preservation, few have analyzed the effects of reduced ship speed on vessel safety. Those few studies have not yet measured the relationship between vessel speed and accidents by using real accident data. To fill this gap in the literature, this study estimates the impact of vessel speed reduction on vessel damages, casualties and frequency of vessel accidents. Accidents in RSZ ports were compared to non-RSZ ports by using U.S. Coast Guard data to capture the speed reduction effects. The results show that speed reduction influenced accident frequency as a result of two factors, the fuel price and the RSZ designation. Every $10 increase in the fuel price led to a 10.3% decrease in the number of accidents, and the RSZ designation reduced vessel accidents by 47.9%. However, the results do not clarify the exact impact of speed reduction on accident casualty. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. 78 FR 60321 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-01

    ... sample selection. A steam generator tube rupture (SGTR) event is one of the design basis accidents that... in the design basis accident analysis. The proposed change will not cause the consequences of a SGTR... changes to the plant design basis or postulated accidents resulting from potential tube degradation. The...

  17. Overview of the U.S. DOE Accident Tolerant Fuel Development Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jon Carmack; Frank Goldner; Shannon M. Bragg-Sitton

    2013-09-01

    The United States Fuel Cycle Research and Development Advanced Fuels Campaign has been given the responsibility to conduct research and development on enhanced accident tolerant fuels with the goal of performing a lead test assembly or lead test rod irradiation in a commercial reactor by 2022. The Advanced Fuels Campaign has defined fuels with enhanced accident tolerance as those that, in comparison with the standard UO2-Zircaloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining ormore » improving the fuel performance during normal operations and operational transients, as well as design-basis and beyond design-basis events. This paper provides an overview of the FCRD Accident Tolerant Fuel program. The ATF attributes will be presented and discussed. Attributes identified as potentially important to enhance accident tolerance include reduced hydrogen generation (resulting from cladding oxidation), enhanced fission product retention under severe accident conditions, reduced cladding reaction with high-temperature steam, and improved fuel-cladding interaction for enhanced performance under extreme conditions. To demonstrate the enhanced accident tolerance of candidate fuel designs, metrics must be developed and evaluated using a combination of design features for a given LWR design, potential improvements to that design, and the design of an advanced fuel/cladding system. The aforementioned attributes provide qualitative guidance for parameters that will be considered for fuels with enhanced accident tolerance. It may be unnecessary to improve in all attributes and it is likely that some attributes or combination of attributes provide meaningful gains in accident tolerance, while others may provide only marginal benefits. Thus, an initial step in program implementation will be the development of quantitative metrics. A companion paper in these proceedings provides an update on the status of establishing these quantitative metrics for accident tolerant LWR fuel.1 The United States FCRD Advanced Fuels Campaign has embarked on an aggressive schedule for development of enhanced accident tolerant LWR fuels. The goal of developing such a fuel system that can be deployed in the U.S. LWR fleet in the next 10 to 20 years supports the sustainability of clean nuclear power generation in the United States.« less

  18. [Occupational accidents due to exposure to biological material in the multidisciplinary team of the emergency service].

    PubMed

    Oliveira, Adriana Cristina; Lopes, Aline Cristine Souza; Paiva, Maria Henriqueta Rocha Siqueira

    2009-09-01

    This transversal, survey-based research was carried out with a multiprofessional emergency care team in Belo Horizonte, between June and December 2006. The study aimed at estimating the incidence of occupational accidents by exposure to biological material, post-accidents conducts and demographic determinant factors. The study applied a structured questionnaire and descriptive analyses, as well as incidence calculations and logistic regression. The incidence of accidents with biological material reached 20.6%, being 40.8% by sharp materials and 49.0% by body fluids; 35.3% of the accidents took place among physicians and 24.0% among nurses. Post-accidents procedures: no medical assessment, 63.3%; under-notification, 81.6%; no conduct, 55.0%; and no serological follow-up, 61.2%. Factors associated with accidents: working time in the institution (Odds Ratio--OR, 2.84; Credible Interval--CI 95%-1.22-6.62); working in advanced support units (OR = 4.18; CI 95%--1.64-10.64); and interaction between working time in the institution and working in Basic Support Unit (OR 0.27; CI 95%--0.07-1.00). In order to reduce accidents, the implementation of post-accident protocols and follow-up, as well as under-notification norms, are suggested.

  19. Safety on the Job. Some Guidelines for Working Safely. Instructor's Edition.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This teacher's guide was developed to help teachers (especially in Oklahoma) promote safe practices on the job. As a supplement to existing programs in the requirements for job safety, this book can also promote same basic safety attitudes and help support basic safety concepts, with an emphasis on accident prevention. The guide contains eight…

  20. New research opportunities for roadside safety barriers improvement

    NASA Astrophysics Data System (ADS)

    Cantisani, Giuseppe; Di Mascio, Paola; Polidori, Carlo

    2017-09-01

    Among the major topics regarding the protection of roads, restraint systems still represent a big opportunity in order to increase safety performances. When accidents happen, in fact, the infrastructure can substantially contribute to the reduction of consequences if its marginal spaces are well designed and/or effective restraint systems are installed there. Nevertheless, basic concepts and technology of road safety barriers have not significantly changed for the last two decades. The paper proposes a new approach to the study aimed to define possible enhancements of restraint safety systems performances, by using new materials and defining innovative design principles. In particular, roadside systems can be developed with regard to vehicle-barrier interaction, vehicle-oriented design (included low-mass and extremely low-mass vehicles), traffic suitability, user protection, working width reduction. In addition, thanks to sensors embedded into the barriers, it is also expected to deal with new challenges related to the guidance of automatic vehicles and I2V communication.

  1. The History of the Coal Mining Industry and Mining Accidents in the World and Turkey

    PubMed Central

    Atalay, Figen

    2015-01-01

    Three per thousand of the world’s coal reserves and 2% of lignite reserves exist in Turkey. Coal mining is the highest ranking industry for accidents and deaths per capita. For this reason, continuous monitoring and more attention should be gıven to the mining industry. In this review, the basic statistical data related to Turkey’s mining and mining disasters are summarized. PMID:29404107

  2. The impact of young drivers' lifestyle on their road traffic accident risk in greater Athens area.

    PubMed

    Chliaoutakis, J E; Darviri, C; Demakakos, P T

    1999-11-01

    Young drivers (18-24) both in Greece and elsewhere appear to have high rates of road traffic accidents. Many factors contribute to the creation of these high road traffic accidents rates. It has been suggested that lifestyle is an important one. The main objective of this study is to find out and clarify the (potential) relationship between young drivers' lifestyle and the road traffic accident risk they face. Moreover, to examine if all the youngsters have the same elevated risk on the road or not. The sample consisted of 241 young Greek drivers of both sexes. The statistical analysis included factor analysis and logistic regression analysis. Through the principal component analysis a ten factor scale was created which included the basic lifestyle traits of young Greek drivers. The logistic regression analysis showed that the young drivers whose dominant lifestyle trait is alcohol consumption or drive without destination have high accident risk, while these whose dominant lifestyle trait is culture, face low accident risk. Furthermore, young drivers who are religious in one way or another seem to have low accident risk. Finally, some preliminary observations on how health promotion should be put into practice are discussed.

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Walston, S; Rowland, M; Campbell, K

    It is difficult to track to the location of a melted core in a GE BWR with Mark I containment during a beyond-design-basis accident. The Cooper Nuclear Station provided a baseline of normal material distributions and shielding configurations for the GE BWR with Mark I containment. Starting with source terms for a design-basis accident, methods and remote observation points were investigated to allow tracking of a melted core during a beyond-design-basis accident. The design of the GE BWR with Mark-I containment highlights an amazing poverty of expectations regarding a common mode failure of all reactor core cooling systems resulting inmore » a beyond-design-basis accident from the simple loss of electric power. This design is shown in Figure 1. The station blackout accident scenario has been consistently identified as the leading contributor to calculated probabilities for core damage. While NRC-approved models and calculations provide guidance for indirect methods to assess core damage during a beyond-design-basis loss-of-coolant accident (LOCA), there appears to be no established method to track the location of the core directly should the LOCA include a degree of fuel melt. We came to the conclusion that - starting with detailed calculations which estimate the release and movement of gaseous and soluble fission products from the fuel - selected dose readings in specific rooms of the reactor building should allow the location of the core to be verified.« less

  4. Urban pedestrian accident countermeasures experimental evaluation. Volume 2, Accident studies

    DOT National Transportation Integrated Search

    1975-02-01

    A pedestrian accident data collection system was established in six major cities. The system involved using the regular police accident report form and a specifically designed supplementary data form. The information on the forms was combined, and th...

  5. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CROWE, R.D.; PIEPHO, M.G.

    2000-03-23

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  6. [Essential aspects of ophthalmological expert assessment in private accident insurance].

    PubMed

    Tost, F

    2014-06-01

    Commissions for an expert assessment place basically high demands on commissioned eye specialists because this activity differs from the normal routine field of work. In addition to assessing objective symptoms and subjective symptomatics in a special analytical manner, eye specialists are expected to have knowledge of basic legal terminology, such as proximate cause, evidence and evidential value. Only under these prerequisites can an ophthalmologist fulfill the function of an expert with a high level of quality and adequately adjust the special medical ophthalmological expertise to the requirements of the predominantly legally based clients commissioning the report and oriented to the appropriate valid legal norms. Particularly common difficulties associated with making an ophthalmological expert report for private accident insurance, e.g. determination of the reduction in functional quality, consideration of partial causality and assessment of diplopia are discussed.

  7. The accident analysis of mobile mine machinery in Indian opencast coal mines.

    PubMed

    Kumar, R; Ghosh, A K

    2014-01-01

    This paper presents the analysis of large mining machinery related accidents in Indian opencast coal mines. The trends of coal production, share of mining methods in production, machinery deployment in open cast mines, size and population of machinery, accidents due to machinery, types and causes of accidents have been analysed from the year 1995 to 2008. The scrutiny of accidents during this period reveals that most of the responsible factors are machine reversal, haul road design, human fault, operator's fault, machine fault, visibility and dump design. Considering the types of machines, namely, dumpers, excavators, dozers and loaders together the maximum number of fatal accidents has been caused by operator's faults and human faults jointly during the period from 1995 to 2008. The novel finding of this analysis is that large machines with state-of-the-art safety system did not reduce the fatal accidents in Indian opencast coal mines.

  8. Truck accidents at freeway ramps : data analysis and high-risk site identification

    DOT National Transportation Integrated Search

    1998-01-01

    To examine the relationship of ramp design to truck accident rates, this paper presents an analysis of truck accidents in Washington State, plus a comparison to limited data from Colorado and California. The authors group freeway truck accidents by r...

  9. Modeling Transients and Designing a Passive Safety System for a Nuclear Thermal Rocket Using Relap5

    NASA Astrophysics Data System (ADS)

    Khatry, Jivan

    Long-term high payload missions necessitate the need for nuclear space propulsion. Several nuclear reactor types were investigated by the Nuclear Engine for Rocket Vehicle Application (NERVA) program of National Aeronautics and Space Administration (NASA). Study of planned/unplanned transients on nuclear thermal rockets is important due to the need for long-term missions. A NERVA design known as the Pewee I was selected for this purpose. The following transients were run: (i) modeling of corrosion-induced blockages on the peripheral fuel element coolant channels and their impact on radiation heat transfer in the core, and (ii) modeling of loss-of-flow-accidents (LOFAs) and their impact on radiation heat transfer in the core. For part (i), the radiation heat transfer rate of blocked channels increases while their neighbors' decreases. For part (ii), the core radiation heat transfer rate increases while the flow rate through the rocket system is decreased. However, the radiation heat transfer decreased while there was a complete LOFA. In this situation, the peripheral fuel element coolant channels handle the majority of the radiation heat transfer. Recognizing the LOFA as the most severe design basis accident, a passive safety system was designed in order to respond to such a transient. This design utilizes the already existing tie rod tubes and connects them to a radiator in a closed loop. Hence, this is basically a secondary loop. The size of the core is unchanged. During normal steady-state operation, this secondary loop keeps the moderator cool. Results show that the safety system is able to remove the decay heat and prevent the fuel elements from melting, in response to a LOFA and subsequent SCRAM.

  10. Designing an Experimental "Accident"

    ERIC Educational Resources Information Center

    Picker, Lester

    1974-01-01

    Describes an experimental "accident" that resulted in much student learning, seeks help in the identification of nematodes, and suggests biology teachers introduce similar accidents into their teaching to stimulate student interest. (PEB)

  11. School sports accidents: analysis of causes, modes, and frequencies.

    PubMed

    Kelm, J; Ahlhelm, F; Pape, D; Pitsch, W; Engel, C

    2001-01-01

    About 5% of all school children are seriously injured during physical education every year. Because of its influence on children's attitude toward sports and the economic aspects, an evaluation of causes and medical consequences is necessary. In this study, 213 school sports accidents were investigated. Besides diagnosis, the localization of injuries, as well as the duration of the sick leave were documented. Average age of injured students was 13 years. Most of the injured students blamed themselves for the accident. The most common injuries were sprains, contusions, and fractures. Main reasons for the accidents were faults in basic motion training. Playing soccer and basketball were the most frequent reasons for injuries. The upper extremity was more frequently involved than the lower extremity. Sports physicians and teachers should work out a program outlining the individual needs and capabilities of the injured students to reintegrate them into physical education.

  12. 100 years of occupational safety research: From basic protections and work analysis to a multilevel view of workplace safety and risk.

    PubMed

    Hofmann, David A; Burke, Michael J; Zohar, Dov

    2017-03-01

    Starting with initiatives dating back to the mid-1800s, we provide a high-level review of the key trends and developments in the application of applied psychology to the field of occupational safety. Factory laws, basic worker compensation, and research on accident proneness comprised much of the early work. Thus, early research and practice very much focused on the individual worker, the design of their work, and their basic protection. Gradually and over time, the focus began to navigate further into the organizational context. One of the early efforts to broaden beyond the individual worker was a significant focus on safety-related training during the middle of the 20th century. Toward the latter years of the 20th century and continuing the move from the individual worker to the broader organizational context, there was a significant increase in leadership and organizational climate (safety climate) research. Ultimately, this resulted in the development of a multilevel model of safety culture/climate. After discussing these trends, we identify key conclusions and opportunities for future research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  13. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... multiple hospitalization incidents to OSHA under 29 CFR 1904.39. ...

  14. 29 CFR 1960.70 - Reporting of serious accidents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... multiple hospitalization incidents to OSHA under 29 CFR 1904.39. ...

  15. National accident sampling system sample design, phases 2 and 3 : executive summary

    DOT National Transportation Integrated Search

    1979-11-01

    This report describes the Phase 2 and 3 sample design for the : National Accident Sampling System (NASS). It recommends a procedure : for the first-stage selection of Primary Sampling Units (PSU's) and : the second-stage design for the selection of a...

  16. An Innovative Accident Tolerant LWR Fuel Rod Design Based on Uranium-Molybdenum Metal Alloy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Montgomery, Robert O.; Bennett, Wendy D.; Henager, Charles H.

    2016-09-12

    The US Department of Energy is developing a uranium-molybdenum metal alloy Enhanced Accident Tolerant Fuel concept for Light Water Reactor applications that provides improved fuel performance during normal operation, anticipated operational occurrences, and postulated accidents. The high initial uranium atom density, the high thermal conductivity, and a low heat capacity permit a U-Mo-based fuel assembly to meet important design and safety requirements. These attributes also result in a fuel design that can satisfy increased fuel utilization demands and allow for improved accident tolerance in LWRs. This paper summarizes the results obtained from the on-going activities to; 1) evaluate the impactmore » of the U-10wt%Mo thermal properties on operational and accident safety margins, 2) produce a triple extrusion of stainless steel cladding/niobium liner/U-10Mo fuel rod specimen and 3) test the high temperature water corrosion of rodlet samples containing a drilled hole in the cladding. Characterization of the cladding and liner thickness uniformity, microstructural features of the U-Mo gamma phase, and the metallurgical bond between the component materials will be presented. The results from corrosion testing will be discussed which yield insights into the resistance to attack by water ingress during high temperature water exposure for the triple extruded samples containing a drilled hole. These preliminary evaluations find that the U-10Mo fuel design concept has many beneficial features that can meet or improve conventional LWR fuel performance requirements under normal operation, AOOs, and postulated accidents. The viability of a deployable U-Mo fuel design hinges on demonstrating that fabrication processes and alloying additions can produce acceptable irradiation stability during normal operation and accident conditions and controlled metal-water reaction rates in the unlikely event of a cladding perforation. In the area of enhanced accident tolerance, a key objective is to establish that the lower stored energy of the U-Mo fuel design can provide the emergency core cooling systems the opportunity to maintain the reactor core in a coolable geometry following an accident.« less

  17. An influential factor for external radiation dose estimation for residents after the Fukushima Daiichi Nuclear Power Plant accident-time spent outdoors for residents in Iitate Village.

    PubMed

    Ishikawa, Tetsuo; Yasumura, Seiji; Ohtsuru, Akira; Sakai, Akira; Akahane, Keiichi; Yonai, Shunsuke; Sakata, Ritsu; Ozasa, Kotaro; Hayashi, Masayuki; Ohira, Tetsuya; Kamiya, Kenji; Abe, Masafumi

    2016-06-01

    Many studies have been conducted on radiation doses to residents after the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident. Time spent outdoors is an influential factor for external dose estimation. Since little information was available on actual time spent outdoors for residents, different values of average time spent outdoors per day have been used in dose estimation studies on the FDNPP accident. The most conservative value of 24 h was sometimes used, while 2.4 h was adopted for indoor workers in the UNSCEAR 2013 report. Fukushima Medical University has been estimating individual external doses received by residents as a part of the Fukushima Health Management Survey by collecting information on the records of moves and activities (the Basic Survey) after the accident from each resident. In the present study, these records were analyzed to estimate an average time spent outdoors per day. As an example, in Iitate Village, its arithmetic mean was 2.08 h (95% CI: 1.64-2.51) for a total of 170 persons selected from respondents to the Basic Survey. This is a much smaller value than commonly assumed. When 2.08 h is used for the external dose estimation, the dose is about 25% (23-26% when using the above 95% CI) less compared with the dose estimated for the commonly used value of 8 h.

  18. Severe Accident Test Station Design Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Snead, Mary A.; Yan, Yong; Howell, Michael

    The purpose of the ORNL severe accident test station (SATS) is to provide a platform for evaluation of advanced fuels under projected beyond design basis accident (BDBA) conditions. The SATS delivers the capability to map the behavior of advanced fuels concepts under accident scenarios across various temperature and pressure profiles, steam and steam-hydrogen gas mixtures, and thermal shock. The overall facility will include parallel capabilities for examination of fuels and irradiated materials (in-cell) and non-irradiated materials (out-of-cell) at BDBA conditions as well as design basis accident (DBA) or loss of coolant accident (LOCA) conditions. Also, a supporting analytical infrastructure tomore » provide the data-needs for the fuel-modeling components of the Fuel Cycle Research and Development (FCRD) program will be put in place in a parallel manner. This design report contains the information for the first, second and third phases of design and construction of the SATS. The first phase consisted of the design and construction of an out-of-cell BDBA module intended for examination of non-irradiated materials. The second phase of this work was to construct the BDBA in-cell module to test irradiated fuels and materials as well as the module for DBA (i.e. LOCA) testing out-of-cell, The third phase was to build the in-cell DBA module. The details of the design constraints and requirements for the in-cell facility have been closely captured during the deployment of the out-of-cell SATS modules to ensure effective future implementation of the in-cell modules.« less

  19. 10 CFR 52.171 - Finality of manufacturing licenses; information requests.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... required for issuance of a construction permit, operating license, combined license, in any hearing under... manufactured reactor, the costs and benefits of severe accident mitigation design alternatives, and the bases for not incorporating severe accident mitigation design alternatives into the design of the reactor to...

  20. Modification of knowledge on occupational accidents among schoolchildren who resided in a landfill impacted area.

    PubMed

    Gomes, Rosangela Maiara Vindoura; Câmara, Volney de Magalhães; Souza, Delma Perpétua Oliveira de

    2016-01-01

    The prevalence of occupational accidents is very high in Brazil, having impacts on the health system and social security. This requires prevention, which must start with students of the Basic Education. The knowledge on this kind of accidents among children and adolescents studying in an area near a sanitary landfill was evaluated, before and after the development of activities on health education. A cross-sectional study was conducted in 2013 and included the application of the same questionnaire among students from a school in Cuiabá-MT, Brazil, before and after educational health activities related to the definition of occupational accidents. Univariate analyses of absolute and relative frequencies and bivariate analyses using the χ2 Test and Fisher's Exact Test were performed with a significance level of 0.05 and 95%CI. There was a statistically significant increase of the knowledge on these types of accidents after the educational activities (p < 0.05). The activities carried out indicate that schools are important for the development and systematization of knowledge arising from reality.

  1. A functional comparison of basic restraint systems.

    DOT National Transportation Integrated Search

    1967-06-01

    The availability of information necessary to provide realistic solutions for personal safety problems in public and private transportation systems is found to be inadequate and incomplete. The problem of body restraint during the accident event is pu...

  2. Contributing factors in construction accidents.

    PubMed

    Haslam, R A; Hide, S A; Gibb, A G F; Gyi, D E; Pavitt, T; Atkinson, S; Duff, A R

    2005-07-01

    This overview paper draws together findings from previous focus group research and studies of 100 individual construction accidents. Pursuing issues raised by the focus groups, the accident studies collected qualitative information on the circumstances of each incident and the causal influences involved. Site based data collection entailed interviews with accident-involved personnel and their supervisor or manager, inspection of the accident location, and review of appropriate documentation. Relevant issues from the site investigations were then followed up with off-site stakeholders, including designers, manufacturers and suppliers. Levels of involvement of key factors in the accidents were: problems arising from workers or the work team (70% of accidents), workplace issues (49%), shortcomings with equipment (including PPE) (56%), problems with suitability and condition of materials (27%), and deficiencies with risk management (84%). Employing an ergonomics systems approach, a model is proposed, indicating the manner in which originating managerial, design and cultural factors shape the circumstances found in the work place, giving rise to the acts and conditions which, in turn, lead to accidents. It is argued that attention to the originating influences will be necessary for sustained improvement in construction safety to be achieved.

  3. [Safety in the Microbiology laboratory].

    PubMed

    Rojo-Molinero, Estrella; Alados, Juan Carlos; de la Pedrosa, Elia Gómez G; Leiva, José; Pérez, José L

    2015-01-01

    The normal activity in the laboratory of microbiology poses different risks - mainly biological - that can affect the health of their workers, visitors and the community. Routine health examinations (surveillance and prevention), individual awareness of self-protection, hazard identification and risk assessment of laboratory procedures, the adoption of appropriate containment measures, and the use of conscientious microbiological techniques allow laboratory to be a safe place, as records of laboratory-acquired infections and accidents show. Training and information are the cornerstones for designing a comprehensive safety plan for the laboratory. In this article, the basic concepts and the theoretical background on laboratory safety are reviewed, including the main legal regulations. Moreover, practical guidelines are presented for each laboratory to design its own safety plan according its own particular characteristics. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  4. The role of personality traits and driving experience in self-reported risky driving behaviors and accident risk among Chinese drivers.

    PubMed

    Tao, Da; Zhang, Rui; Qu, Xingda

    2017-02-01

    The purpose of this study was to explore the role of personality traits and driving experience in the prediction of risky driving behaviors and accident risk among Chinese population. A convenience sample of drivers (n=511; mean (SD) age=34.2 (8.8) years) completed a self-report questionnaire that was designed based on validated scales for measuring personality traits, risky driving behaviors and self-reported accident risk. Results from structural equation modeling analysis demonstrated that the data fit well with our theoretical model. While showing no direct effects on accident risk, personality traits had direct effects on risky driving behaviors, and yielded indirect effects on accident risk mediated by risky driving behaviors. Both driving experience and risky driving behaviors directly predicted accident risk and accounted for 15% of its variance. There was little gender difference in personality traits, risky driving behaviors and accident risk. The findings emphasized the importance of personality traits and driving experience in the understanding of risky driving behaviors and accident risk among Chinese drivers and provided new insight into the design of evidence-based driving education and accident prevention interventions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery.

    PubMed

    Sadeghi, Samira; Sadeghi, Leyla; Tricot, Nicolas; Mathieu, Luc

    2017-12-01

    Accident reports are published in order to communicate the information and lessons learned from accidents. An efficient accident recording and analysis system is a necessary step towards improvement of safety. However, currently there is a shortage of efficient tools to support such recording and analysis. In this study we introduce a flexible and customizable tool that allows structuring and analysis of this information. This tool has been implemented under TEEXMA®. We named our prototype TEEXMA®SAFETY. This tool provides an information management system to facilitate data collection, organization, query, analysis and reporting of accidents. A predefined information retrieval module provides ready access to data which allows the user to quickly identify the possible hazards for specific machines and provides information on the source of hazards. The main target audience for this tool includes safety personnel, accident reporters and designers. The proposed data model has been developed by analyzing different accident reports.

  6. Hot Cell Installation and Demonstration of the Severe Accident Test Station

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Linton, Kory D.; Burns, Zachary M.; Terrani, Kurt A.

    A Severe Accident Test Station (SATS) capable of examining the oxidation kinetics and accident response of irradiated fuel and cladding materials for design basis accident (DBA) and beyond design basis accident (BDBA) scenarios has been successfully installed and demonstrated in the Irradiated Fuels Examination Laboratory (IFEL), a hot cell facility at Oak Ridge National Laboratory. The two test station modules provide various temperature profiles, steam, and the thermal shock conditions necessary for integral loss of coolant accident (LOCA) testing, defueled oxidation quench testing and high temperature BDBA testing. The installation of the SATS system restores the domestic capability to examinemore » postulated and extended LOCA conditions on spent fuel and cladding and provides a platform for evaluation of advanced fuel and accident tolerant fuel (ATF) cladding concepts. This document reports on the successful in-cell demonstration testing of unirradiated Zircaloy-4. It also contains descriptions of the integral test facility capabilities, installation activities, and out-of-cell benchmark testing to calibrate and optimize the system.« less

  7. [Radiological estimation of the protective measures used in agricultural complex of Belarus Republic in 2000-2005 (20 years after the accident on the Chernobyl NPP)].

    PubMed

    Podoliak, A G; Bogdevich, I M; Ageets, V Iu; Timofeev, S F

    2007-01-01

    The radiological estimation of the basic agrochemistry measures spent for the agriculture of the Republic of Belarus in 2000-2005 is given. Laws of behavior radionuclides 137Cs and 90Sr in agrosystems are considered depending on used protective a measures (countermeasures) and the primary goals on liquidation of consequences in sphere of agrarian and industrial complex which are necessary for solving during the remote period after accident ChNNP (in 2006-2010) are studied.

  8. PNNL Measurement Results for the 2016 Criticality Accident Dosimetry Exercise at the Nevada National Security Stite (IER-148)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rathbone, Bruce A.; Morley, Shannon M.; Stephens, John A.

    The Pacific Northwest National Laboratory (PNNL) participated in a criticality accident dosimetry intercomparison exercise held at the Nevada National Security Site (NNSS) May 24-27, 2016. The exercise was administered by Lawrence Livermore National Laboratory (LLNL) and consisted of three exposures performed using the Godiva-IV critical assembly housed in the Device Assembly Facility (DAF) located on the NNSS site. The exercise allowed participants to test the ability of their nuclear accident dosimeters to meet the performance criteria in ANSI/HPS N13.3-2013, Dosimetry for Criticality Accidents and to obtain new measurement data for use in revising dose calculation methods and quick sort screeningmore » methods where appropriate. PNNL participated with new prototype Personal Nuclear Accident Dosimeter (PNAD) and Fixed Nuclear Accident Dosimeter (FNAD) designs as well as the existing historical PNAD design. The new prototype designs incorporate optically stimulated luminescence (OSL) dosimeters in place of thermoluminescence dosimeters (TLDs), among other design changes, while retaining the same set of activation foils historically used. The default dose calculation methodology established decades ago for use with activation foils in PNNL PNADs and FNADs was used to calculate neutron dose results for both the existing and prototype dosimeters tested in the exercise. The results indicate that the effective cross sections and/or dose conversion factors used historically need to be updated to accurately measure the operational quantities recommended for nuclear accident dosimetry in ANSI/HPS N13.3-2013 and to ensure PNAD and FNAD performance meets the ANSI/HPS N13.3-2013 performance criteria. The operational quantities recommended for nuclear accident dosimetry are personal absorbed dose, Dp(10), and ambient absorbed dose, D*(10).« less

  9. Crashworthiness : an illustrated commentary on occupant survival in general aviation accidents.

    DOT National Transportation Integrated Search

    1983-04-01

    This report is an illustrated commentary on crash survival in general aviation aircraft. Photographs, drawings, and discussion present some basic concepts of crash forces; mechanisms of injury to occupants; and the roles of shoulder harnesses, lapbel...

  10. Design and implementation of an identification system in construction site safety for proactive accident prevention.

    PubMed

    Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

    2012-09-01

    Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Human factors analysis and classification system-HFACS.

    DOT National Transportation Integrated Search

    2000-02-01

    Human error has been implicated in 70 to 80% of all civil and military aviation accidents. Yet, most accident : reporting systems are not designed around any theoretical framework of human error. As a result, most : accident databases are not conduci...

  12. The application of algorithm in taxi security system

    NASA Astrophysics Data System (ADS)

    Luo, Chengyu

    2017-08-01

    With the booming of the society and economy today, Taxis and private cars have gradually become one of the most popular tools in transportation for their low price and convenience. However, because of the breakdown in the security system, a few accidents occurred due to the illegal taxi. The unreliable security management has attributed to the lack of trust in taxi companies and relevant regulatory authorities, which considered to be the reason why people are worried about it. Accordingly, we put forward a design for a taxi security system, making use of modern technology such as NFC, iBeacon, GPS combined with algorithms, automatically recognize the taxi we take, and reflecting basic information of taxi and driver on our mobile phone.

  13. Factor Analysis of Traffic Safety in Urban Roads Based on FTA-LEC

    NASA Astrophysics Data System (ADS)

    Shuicheng, TIAN; Xingbo, YANG; Xiaoqing, SHEN; Detao, ZHANG

    2018-05-01

    In order to reduce the number and the loss of urban road traffic accidents in our country, improve the safety of road traffic, a statistical analysis of the research report on major road traffic accidents in 2016 was conducted. The risk factors affecting urban road traffic in China were analyzed by using FTA to find the basic hidden events. Secondly, the risk value of the identified hidden danger events were calculated and classified into four levels I, II, III and IV through the LEC evaluation method. Finally, the graded results of risk factors are verified through a case of specific accidents in Beijing. The results show that: the case verified the scientificalness and effectiveness of hazard classification and provided guidance for urban road traffic management.

  14. MEMS scanned laser head-up display

    NASA Astrophysics Data System (ADS)

    Freeman, Mark O.

    2011-03-01

    Head-up displays (HUD) in automobiles and other vehicles have been shown to significantly reduce accident rates by keeping the driver's eyes on the road. The requirements for automotive HUDs are quite demanding especially in terms of brightness, dimming range, supplied power, and size. Scanned laser display technology is particularly well-suited to this application since the lasers can be very efficiently relayed to the driver's eyes. Additionally, the lasers are only turned on where the light is needed in the image. This helps to provide the required brightness while minimizing power and avoiding a background glow that disturbs the see-through experience. Microvision has developed a couple of HUD architectures that are presented herein. One design uses an exit pupil expander and relay optics to produce a high quality virtual image for built-in systems where the image appears to float above the hood of the auto. A second design uses a patented see-through screen technology and pico projector to make automotive HUDs available to anyone with a projector. The presentation will go over the basic designs for the two types of HUD and discuss design tradeoffs.

  15. Accident models for two-lane rural roads : segments and intersections

    DOT National Transportation Integrated Search

    1998-10-01

    This report is a direct step for the implementation of the Accident Analysis Module in the Interactive Highway Safety Design Model (IHSDM). The Accident Analysis Module is expected to estimate the safety of two-lane rural highway characteristics for ...

  16. Normal Accident at Three Mile Island.

    ERIC Educational Resources Information Center

    Perrow, Charles

    1981-01-01

    Discusses some aspects of the accident at the Three Mile Island nuclear power plant. Explains a number of factors involved including the type of accident, warnings, design and equipment failure, operator error, and negative synergy. Presents alternatives to systems with catastrophic potential. (MK)

  17. Factors correlated with traffic accidents as a basis for evaluating Advanced Driver Assistance Systems.

    PubMed

    Staubach, Maria

    2009-09-01

    This study aims to identify factors which influence and cause errors in traffic accidents and to use these as a basis for information to guide the application and design of driver assistance systems. A total of 474 accidents were examined in depth for this study by means of a psychological survey, data from accident reports, and technical reconstruction information. An error analysis was subsequently carried out, taking into account the driver, environment, and vehicle sub-systems. Results showed that all accidents were influenced by errors as a consequence of distraction and reduced activity. For crossroad accidents, there were further errors resulting from sight obstruction, masked stimuli, focus errors, and law infringements. Lane departure crashes were additionally caused by errors as a result of masked stimuli, law infringements, expectation errors as well as objective and action slips, while same direction accidents occurred additionally because of focus errors, expectation errors, and objective and action slips. Most accidents were influenced by multiple factors. There is a safety potential for Advanced Driver Assistance Systems (ADAS), which support the driver in information assimilation and help to avoid distraction and reduced activity. The design of the ADAS is dependent on the specific influencing factors of the accident type.

  18. Computers in Traffic Education.

    ERIC Educational Resources Information Center

    Alexander, O. P.

    1983-01-01

    Traffic education covers basic road skills, legal/insurance aspects, highway code, accident causation/prevention, and vehicle maintenance. Microcomputer applications to traffic education are outlined, followed by a selected example of programs currently available (focusing on drill/practice, simulation, problem-solving, data manipulation, games,…

  19. Analysis of data on Air Force personnel collected at Lackland Air Force Base

    DOT National Transportation Integrated Search

    1969-10-01

    In July, 1967, a report was published by the Personnel Research Laboratory, Lackland Air Force Base, entitled "An Attempt to Predict Automobile Accidents Among Air Force Personnnel". Approximately twelve thousand basic airmen and eleven hundred offic...

  20. Validation of LOC-I interventions

    DOT National Transportation Integrated Search

    2012-08-13

    The basic tenet of this paper is that todays national airspace systems, at least in advanced industrial countries, qualify as so-called Highly Reliable Systems (HRS). In an HRS, even the type of accident that causes the most fatalities is a rare e...

  1. Traffic safety measures using multiple streams real time data : final report

    DOT National Transportation Integrated Search

    2017-01-04

    Traffic crashes and accidents result from many complex factors, but at a basic level, they are conflicts : among vehicles and/or other road users. Roadway conditions, traffic signals, weather, traffic flow, : drivers' behavior and health of vehicles ...

  2. Toxic release consequence analysis tool (TORCAT) for inherently safer design plant.

    PubMed

    Shariff, Azmi Mohd; Zaini, Dzulkarnain

    2010-10-15

    Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage. 2010 Elsevier B.V. All rights reserved.

  3. The Human Factors Analysis and Classification System : HFACS : final report.

    DOT National Transportation Integrated Search

    2000-02-01

    Human error has been implicated in 70 to 80% of all civil and military aviation accidents. Yet, most accident reporting systems are not designed around any theoretical framework of human error. As a result, most accident databases are not conducive t...

  4. Comparison of the accident process, radioactivity release and ground contamination between Chernobyl and Fukushima-1

    PubMed Central

    Imanaka, Tetsuji; Hayashi, Gohei; Endo, Satoru

    2015-01-01

    In this report, we have reviewed the basic features of the accident processes and radioactivity releases that occurred in the Chernobyl accident (1986) and in the Fukushima-1 accident (2011). The Chernobyl accident was a power-surge accident that was caused by a failure of control of a fission chain reaction, which instantaneously destroyed the reactor and building, whereas the Fukushima-1 accident was a loss-of-coolant accident in which the reactor cores of three units were melted by decay heat after losing the electricity supply. Although the quantity of radioactive noble gases released from Fukushima-1 exceeded the amount released from Chernobyl, the size of land area severely contaminated by 137Cesium (137Cs) was 10 times smaller around Fukushima-1 compared with around Chernobyl. The differences in the accident process are reflected in the composition of the discharged radioactivity as well as in the composition of the ground contamination. Volatile radionuclides (such as 132Te-132I, 131I, 134Cs and 137Cs) contributed to the gamma-ray exposure from the ground contamination around Fukishima-1, whereas a greater variety of radionuclides contributed significantly around Chernobyl. When radioactivity deposition occurred, the radiation exposure rate near Chernobyl is estimated to have been 770 μGy h−1 per initial 137Cs deposition of 1000 kBq m−2, whereas it was 100 μGy h−1 around Fukushima-1. Estimates of the cumulative exposure for 30 years are 970 and 570 mGy per initial deposition of 1000 kBq m−2 for Chernobyl and Fukusima-1, respectively. Of these exposures, 49 and 98% were contributed by radiocesiums (134Cs + 137Cs) around Chernobyl and Fukushima-1, respectively. PMID:26568603

  5. A spatial analysis of urban transit accidents assisted by Emergency Mobile Care Services: an analysis of space and time.

    PubMed

    Mendonça, Marcela Franklin Salvador de; Silva, Amanda Priscila de Santana Cabral; Castro, Claudia Cristina Lima de

    2017-01-01

    Urban transit accident are a global public health problem. The objective of this study was to describe the profile of the victims and the occurrences of urban transit accidents attended to by emergency mobile care services (Serviço de Atendimento Móvel de Urgência- SAMU) in Recife, and their distribution based on spatial analysis. An ecological study, developed through secondary data from emergency mobile care services in Recife, referring to the total number of occurrences of urban transit accidents attended to from January 1 to June 30, 2015. The spatial analysis was performed using the Moran index. Basic support units performed most of the emergency services (89.2%). Among the victims, there was a predominance of males (76.8%) and an age group of 20 - 29 years old (31.5%). Collisions were responsible for 59.9% of the transit accidents, and motorcycles for 61.6% of the accidents among all means of transportation. Friday was the day that showed the highest risk for treatment, and there was a concentration of events between 6:00 am - 8:59am and 6:00pm - 8:59pm. The MoranMap identified critical areas where calls came from traffic accidents during the period analyzed. The records of the mobile service from the spatial analysis are an important source of information for health surveillance. The spatial analysis of urban transit accidents identified regions with a positive spatial correlation, providing subsidies to the logistical planning of emergency mobile care services. This study is groundbreaking in that it offers such information about the region.

  6. A recommended epidemiological study design for examining the adverse health effects among emergency workers who experienced the TEPCO fukushima daiichi NPP accident in 2011.

    PubMed

    Yasui, Shojiro

    2016-01-01

    Results from medical examinations conducted in 2012 of workers who were engaged in radiation work in 2012 as a result of the 2011 Fukushima Daiichi Nuclear Power Plant (NPP) accident showed that the prevalence of abnormal findings was 4.21%, 3.23 points higher than the 0.98% that was found prior to the accident in the jurisdiction area of the labor inspection office which holds jurisdiction over the NPP. The Ministry of Health, Labour and Welfare (MHLW) concluded that the 2010 and 2012 data cannot be easily compared because 70% of the enterprises within the jurisdiction of the office that reported the 2012 results were different from those that did so in 2010. In addition, although the radiation workers' estimated average dose weighted by number of workers was 3.66 times higher than decontamination workers' dose, the prevalence among radiation workers was only 1.14 times higher than that among decontamination workers. Based on the results of the medical examinations, however, the MHLW decided to implement an epidemiological study on the health effects of radiation exposure on all emergency workers. This article explains key issues of the basic design of the study recommended by the expert meeting established in the MHLW and also identifies challenges that could not be resolved and thus required further consideration by the study researchers. The major issues included: (a) study methods and target group; (b) evaluation of cumulative doses; (c) health effects (end points); (d) control of confounding factors; and (e) study implementation framework. Identified key challenges that required further deliberation were: (a) preventing arbitrary partisan analysis; (b) ensuring a high participation rate; (c) inquiry about the medical radiation doses; and (d) the preparedness of new analytical technology. The study team formulated and implemented the pilot study in 2014 and started the full-scale study in April 2015 with funding from a research grant from the MHLW.

  7. A study of a steering system algorithm for pleasure boats based on stability analysis of a human-machine system model

    NASA Astrophysics Data System (ADS)

    Ikeda, Fujio; Toyama, Shigehiro; Ishiduki, Souta; Seta, Hiroaki

    2016-09-01

    Maritime accidents of small ships continue to increase in number. One of the major factors is poor manoeuvrability of the Manual Hydraulic Steering Mechanism (MHSM) in common use. The manoeuvrability can be improved by using the Electronic Control Steering Mechanism (ECSM). This paper conducts stability analyses of a pleasure boat controlled by human models in view of path following on a target course, in order to establish design guidelines for the ECSM. First, to analyse the stability region, the research derives the linear approximated model in a planar global coordinate system. Then, several human models are assumed to develop closed-loop human-machine controlled systems. These human models include basic proportional, derivative, integral and time-delay actions. The stability analysis simulations for those human-machine systems are carried out. The results show that the stability region tends to spread as a ship's velocity increases in the case of the basic proportional human model. The derivative action and time-delay action of human models are effective in spreading the stability region in their respective ranges of frontal gazing points.

  8. Simulation of Hydrogen Distribution in Ignalina NPP ALS Compartments During BDBA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Babilas, Egidijus; Urbonavicius, Egidijus; Rimkevicius, Sigitas

    2006-07-01

    Accident Localisation System (ALS) of Ignalina NPP is a 'pressure suppression' type confinement, which protects the population, employees and environment from the radiation hazards. According to the Safety Analysis Report for Ignalina NPP {approx}110 m{sup 3} of hydrogen is released to ALS compartments during the Maximum Design Basis Accident. However in case of beyond design basis accident, when the oxidation of zirconium starts, the amount of generated hydrogen could be significantly higher. If the volume concentration of hydrogen in the compartment reaches 4%, there is a possibility for a combustible mixture to appear. To prevent the possible hydrogen accumulation inmore » the ALS of the Ignalina NPP during an accident the H{sub 2} control system is installed. The results of the performed analysis derived the places of the possible H{sub 2} accumulation in the ALS compartments during the transient processes and assessed the mixture combustibility in these places for a beyond design basis accident scenario. Such analysis of H{sub 2} distribution in the ALS of Ignalina NPP in case of BDBA was not performed before. (authors)« less

  9. Va-Room: Motorcycle Safety.

    ERIC Educational Resources Information Center

    Keller, Rosanne

    One of a series of instructional materials produced by the Literacy Council of Alaska, this booklet provides information about motorcycle safety. Using a simplified vocabulary and shorter sentences, it offers statistics concerning motorcycle accidents; information on how to choose the proper machine; basic information about the operation of the…

  10. Fault tree analysis of fire and explosion accidents for dual fuel (diesel/natural gas) ship engine rooms

    NASA Astrophysics Data System (ADS)

    Guan, Yifeng; Zhao, Jie; Shi, Tengfei; Zhu, Peipei

    2016-09-01

    In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel (diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis. The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events. According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.

  11. 10 CFR 72.122 - Overall requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... accidents. (2)(i) Structures, systems, and components important to safety must be designed to withstand the..., and (B) Appropriate combinations of the effects of normal and accident conditions and the effects of... ability to return to a safe condition in the event of an accident. (e) Proximity of sites. An ISFSI or MRS...

  12. 10 CFR 72.122 - Overall requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... accidents. (2)(i) Structures, systems, and components important to safety must be designed to withstand the..., and (B) Appropriate combinations of the effects of normal and accident conditions and the effects of... ability to return to a safe condition in the event of an accident. (e) Proximity of sites. An ISFSI or MRS...

  13. 10 CFR 72.122 - Overall requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... accidents. (2)(i) Structures, systems, and components important to safety must be designed to withstand the..., and (B) Appropriate combinations of the effects of normal and accident conditions and the effects of... ability to return to a safe condition in the event of an accident. (e) Proximity of sites. An ISFSI or MRS...

  14. Analysis of loss of decay-heat-removal sequences at Browns Ferry Unit One

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harrington, R.M.

    1983-01-01

    This paper summarizes the Oak Ridge National Laboratory (ORNL) report Loss of DHR Sequences at Browns Ferry Unit One - Accident Sequence Analysis (NUREG/CR-2973). The Loss of DHR investigation is the third in a series of accident studies concerning the BWR 4 - MK I containment plant design. These studies, sponsored by the Nuclear Regulatory Commission Severe Accident Sequence Analysis (SASA) program, have been conducted at ORNL with the full cooperation of the Tennessee Valley Authority (TVA). The purpose of the SASA studies is to predetermine the probable course of postulated severe accidents so as to establish the timing andmore » the sequence of events. The SASA studies also produce recommendations concerning the implementation of better system design and better emergency operating instructions and operator training. The ORNL studies also include a detailed, best-estimate calculation of the release and transport of radioactive fission products following postulated severe accidents.« less

  15. [Preparedness of health personnel in a highly industrialized health area of Asturias to respond to industrial disasters].

    PubMed

    Castro Delgado, Rafael; Arcos González, Pedro; Cuartas Alvarez, Tatiana

    2003-01-01

    In order to provide a response to industrial accidents with a view to minimizing their consequences, the healthcare personnel working in areas at risk must be properly trained. This study is aimed at determining the degree of subjective perception that healthcare professional have with regard to how well-prepared they are to take action in response to an industrial accident resulting in a large number of injuries, as well as their knowledge of industrial hazards inherent to the area. A questionnaire was designed to measure five dimensions related to the response to industrial accidents (technical knowledge, knowledge of the Area, practical skills, attitudes and training). The sample was comprised of all of the Primary Care physicians and nursing staff in the District and from the Emergency Department at the related hospital. The response rate was 61.2%. The results for the questions related to each dimension, on a maximum scale of 4, were: Technical skills (mu = 1.3; delta = 0.81); Knowledge of the District (mu = 0.75; delta = 0.96); Practical skills (mu = 0.9; delta = 0.8); Attitudes (mu = 3.25; delta = 0.73) and Training (mu = 0.75; delta = 0.88). Those working in hospital emergency departments and those hired under indefinite or temporary contracts scored higher than those employed under permanent contracts. Information and training is lacking among these healthcare professionals, contrasting with the interest shown in correcting these lacks. It is necessary for a basic training and information program to be set up in order to deal with industrial disasters in our Healthcare District.

  16. [Learning from errors: applying aviation safety concepts to medicine].

    PubMed

    Sommer, K-J

    2012-11-01

    Health care safety levels range below other complex industries. Civil aviation has throughout its history developed methods and concepts that have made the airplane into one of the safest means of mass transport. Key elements are accident investigations that focus on cause instead of blame, human-centered design of machinery and processes, continuous training of all personnel and a shared safety culture. These methods and concepts can basically be applied to medicine which has successfully been achieved in certain areas, however, a comprehensive implementation remains to be completed. This applies particularly to including the topic of safety into relevant curricula. Physicians are obliged by the oath"primum nil nocere" to act, but economic as well as political pressure will eventually confine professional freedom if initiative is not taken soon.

  17. Incidence of posttraumatic stress disorder after traffic accidents in Germany.

    PubMed

    Brand, Stephan; Otte, Dietmar; Petri, Maximilian; Decker, Sebastian; Stübig, Timo; Krettek, Christian; Müller, Christian W

    2014-01-01

    Posttraumatic stress disorder (PTSD) is possibly an overlooked diagnosis of victims suffering from traffic accidents sustaining serious to severe injuries. This paper investigates the incidence of PTSD after traffic accidents in Germany. Data from an accident research unit were analyzed in regard to collision details, and preclinical and clinical data. Preclinical data included details on crash circumstances and estimated injury severity as well as data on victims' conditions (e.g. heart rate, blood pressure, consciousness, breath rate). Clinical data included initial assessment in the emergency department, radiographic diagnoses, and basic life parameters comparable to the preclinical data as well as follow-up data on the daily ward. Data were collected in the German-In-Depth Accident Research study, and included gender, type of accident (e.g. type of vehicle, road conditions, rural or urban area), mental disorder, and AIS (Abbreviated Injury Scale) head score. AIS represent a scoring system to measure the injury severity of traffic accident victims. A total 258 out of 32807 data sets were included in this analysis. Data on accident and victims was collected on scene by specialized teams following established algorithms. Besides higher AIS Head scores for male motorcyclists compared to all other subgroups, no significant correlation was found between the mean maximum AIS score and the occurrence of PTSD. Furthermore, there was no correlation between higher AIS head scores, gender, or involvement in road traffic accidents and PTSD. In our study the overall incidence of PTSD after road traffic accidents was very low (0.78% in a total of 32.807 collected data sets) when compared to other published studies. The reason for this very low incidence of PTSD in our patient sample could be seen in an underestimation of the psychophysiological impact of traffic accidents on patients. Patients suffering from direct experiences of traumatic events such as a traffic accident and presenting with signs of clinically significant distress or impairment in social interactions should be treated in a team approach including not only trauma surgeons and surgical skilled staff but also psychophysiological experienced physicians.

  18. The Effect of Educational Intervention Regarding the Knowledge of Mothers on Prevention of Accidents in Childhood

    PubMed Central

    Silva, Elayne Cristina Soares; Fernandes, Maria Neyrian de Fátima; Sá, Márcia Caroline Nascimento; Mota de Souza, Layane; Gordon, Ariadne Siqueira de Araújo; Costa, Ana Cristina Pereira de Jesus; Silva de Araújo, Thábyta; Carvalho, Queliane Gomes da Silva; Maia, Carlos Colares; Machado, Ana Larissa Gomes; Gubert, Fabiane do Amaral; Alexandrino da Silva, Leonardo; Vieira, Neiva Francenely Cunha

    2016-01-01

    Early guidance emphasizes the provision of information to families about growth and normal development in childhood such as specific information about security at home. This research aimed to analyze mothers' knowledge about the prevention of accidents in childhood before and after an educational intervention. It was conducted as a quasi-experimental study with 155 mothers in a Basic Health Unit in northeastern of Brazil in April and May of 2015. The data were collected in two stages through a self-report questionnaire performed before and after the educational intervention by the subjects. The results revealed a significant increase in knowledge about prevention of accidents in childhood in all the self-applied questions (p<0.05). After the educational intervention, there seemed to be a significant difference with the questions regarding the knowledge on preventing fall (p=0.000), drowning (p=0.000), and intoxication (p=0.007). The authors concluded that the educational intervention performed in this study increased the subjects’ knowledge on prevention of accidents in childhood. PMID:27583061

  19. 78 FR 50454 - Entergy Operations, Inc., River Bend Station, Unit 1

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-19

    ... containment internal pressure related to the design basis accident specified either in the technical... RBS to continue to use the pre-extended power uprate value of 7.6 psig rather than use the newly... period following a design basis accident. The Need for the Proposed Action The proposed exemption is...

  20. Trends of Training Courses Conducted in the Human Resources Development Center of the National Institute for Quantum and Radiological Science and Technology After the Fukushima Dai-Ichi Nuclear Power Plant Accident.

    PubMed

    Shimizu, Yuko; Iida, Haruzo; Nenoi, Mitsuru

    2017-07-01

    Environmental contamination with radioactive materials caused by the Fukushima Dai-ichi Nuclear Power Plant (NPP) accident in 2011 raised a serious health concern among residents in Japan, and the demand for radiation experts who can handle the radiation-associated problems has increased. The Human Resources Development Center (HRDC) of the National Institute of for Quantum and Radiological Science and Technology in Japan has offered a variety of training programs covering a wide range of technologies associated with radiation since 1959. In this study, the time-course change in the number and age of the applicants for training programs regularly scheduled at HRDC were analyzed to characterize the demand after the NPP accident. The results suggested that the demand for the training of industrial radiation experts elevated sharply after the NPP accident followed by a prompt decrease, and that young people were likely stimulated to learn the basics of radiation. The demand for the training of medical radiation experts was kept high regardless of the NPP accident. The demand for the training of radiation emergency experts fluctuated apparently with three components: a terminating demand after the criticality accident that occurred in 1999, an urgent demand for handling of the NPP accident, and a sustained demand from local governments that undertook reinforcement of their nuclear disaster prevention program. The demand for the training of school students appeared to be increasing after the NPP accident. It could be foreseen that the demand for training programs targeting young people and medical radiation experts would be elevated in future.

  1. Accident occurrence and functional health patterns: a pilot study of relationships in a graduate population.

    PubMed

    Sheerin, Fintan K; Curtis, Elizabeth; de Vries, Jan

    2012-06-01

    This pilot study sought to examine the relationship between functional health patterns and accident proneness. A quantitative-descriptive design was employed assessing accident proneness by collecting data on the occurrence of accidents among a sample of university graduates, and examining this in relation to biographical data and information collated using the Functional Health Pattern Assessment Screening Tool (FHPAST). Data were analyzed using descriptive and inferential statistics. One FHPAST factor predicted more frequent sports accidents. Age was also shown to be a significant predictor but in a counterintuitive way, with greater age predicting less accident proneness. The FHPAST may have a role to play in accident prediction. Functional health pattern assessment may be useful for predicting accidents. © 2012, The Authors. International Journal of Nursing Knowledge © 2012, NANDA International.

  2. Verification of combined thermal-hydraulic and heat conduction analysis code FLOWNET/TRUMP

    NASA Astrophysics Data System (ADS)

    Maruyama, Soh; Fujimoto, Nozomu; Kiso, Yoshihiro; Murakami, Tomoyuki; Sudo, Yukio

    1988-09-01

    This report presents the verification results of the combined thermal-hydraulic and heat conduction analysis code, FLOWNET/TRUMP which has been utilized for the core thermal hydraulic design, especially for the analysis of flow distribution among fuel block coolant channels, the determination of thermal boundary conditions for fuel block stress analysis and the estimation of fuel temperature in the case of fuel block coolant channel blockage accident in the design of the High Temperature Engineering Test Reactor(HTTR), which the Japan Atomic Energy Research Institute has been planning to construct in order to establish basic technologies for future advanced very high temperature gas-cooled reactors and to be served as an irradiation test reactor for promotion of innovative high temperature new frontier technologies. The verification of the code was done through the comparison between the analytical results and experimental results of the Helium Engineering Demonstration Loop Multi-channel Test Section(HENDEL T(sub 1-M)) with simulated fuel rods and fuel blocks.

  3. Why System Safety Professionals Should Read Accident Reports

    NASA Technical Reports Server (NTRS)

    Holloway, C. M.; Johnson, C. W.

    2006-01-01

    System safety professionals, both researchers and practitioners, who regularly read accident reports reap important benefits. These benefits include an improved ability to separate myths from reality, including both myths about specific accidents and ones concerning accidents in general; an increased understanding of the consequences of unlikely events, which can help inform future designs; a greater recognition of the limits of mathematical models; and guidance on potentially relevant research directions that may contribute to safety improvements in future systems.

  4. Intelligent Modeling for Nuclear Power Plant Accident Management

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Darling, Michael Christropher; Luger, George F.; Jones, Thomas B.

    This study explores the viability of using counterfactual reasoning for impact analyses when understanding and responding to “beyond-design-basis” nuclear power plant accidents. Currently, when a severe nuclear power plant accident occurs, plant operators rely on Severe Accident Management Guidelines. However, the current guidelines are limited in scope and depth: for certain types of accidents, plant operators would have to work to mitigate the damage with limited experience and guidance for the particular situation. We aim to fill the need for comprehensive accident support by using a dynamic Bayesian network to aid in the diagnosis of a nuclear reactor’s state andmore » to analyze the impact of possible response measures.« less

  5. Intelligent Modeling for Nuclear Power Plant Accident Management

    DOE PAGES

    Darling, Michael Christropher; Luger, George F.; Jones, Thomas B.; ...

    2018-03-29

    This study explores the viability of using counterfactual reasoning for impact analyses when understanding and responding to “beyond-design-basis” nuclear power plant accidents. Currently, when a severe nuclear power plant accident occurs, plant operators rely on Severe Accident Management Guidelines. However, the current guidelines are limited in scope and depth: for certain types of accidents, plant operators would have to work to mitigate the damage with limited experience and guidance for the particular situation. We aim to fill the need for comprehensive accident support by using a dynamic Bayesian network to aid in the diagnosis of a nuclear reactor’s state andmore » to analyze the impact of possible response measures.« less

  6. Fukushima nuclear power plant accident and comprehensive health risk management-global radiocontamination and information disaster.

    PubMed

    Yamashita, Shunichi

    2014-06-01

    The Great East Japan Earthquake on March 11, 2011, besides further studying the appropriateness of the initial response and post-countermeasures against the severe Fukushima nuclear accident, has now increased the importance of the epidemiological study in comprehensive health risk management and radiation protection; lessons learnt from the Chernobyl accident should be also implemented. Therefore, since May 2011, Fukushima Prefecture has started the "Fukushima Health Management Survey Project" for the purpose of long-term health care administration and early diagnosis/treatment for the prefectural residents. Basic survey is under investigation on a retrospective estimation of external exposure of the first four months. As one of the four detailed surveys, the thyroid ultrasound examination has clarified the increased detection rate of childhood thyroid cancers as a screening effect in the past three years and so thyroid cancer occurrence by Fukushima nuclear power plant accident, especially due to radioactive iodine will be discussed despite of difficult challenge of accurate estimation of low dose and low-dose rate radiation exposures. Through the on-site valuable experience and a difficult challenge for recovery, we should learn the lessons from this severe and large-scale nuclear accident, especially how to countermeasure against public health emergency at the standpoint of health risk and also social risk management.

  7. The Influence of Supportive and Ethical Work Environments on Work-Related Accidents, Injuries, and Serious Psychological Distress among Hospital Nurses

    PubMed Central

    Tei-Tominaga, Maki; Nakanishi, Miharu

    2018-01-01

    The healthcare industry in Japan has experienced many cases of work-related injuries, accidents, and workers’ compensation claims because of mental illness. This study examined the influence of supportive and ethical work environments on work-related accidents, injuries, and serious psychological distress among hospital nurses. Self-reported questionnaires were distributed to nurses (n = 1114) from 11 hospitals. Valid responses (n = 822, 93% women, mean age = 38.49 ± 10.09 years) were used for analyses. The questionnaire included items addressing basic attributes, work and organizational characteristics, social capital and ethical climate at the workplace, psychological distress, and experience of work-related accidents or injuries in the last half year. The final model of a multivariate logistic regression analysis revealed that those who work less than 4 h of overtime per week (OR = 0.313), those who work on days off more than once per month (OR = 0.424), and an exclusive workplace climate (OR = 1.314) were significantly associated with work-related accidents or injuries. Additionally, an exclusive workplace climate (OR = 1.696) elevated the risk of serious psychological distress. To prevent work-related compensation cases, which are caused by these variables, strengthening hospitals’ occupational health and safety is necessary. PMID:29385044

  8. Fukushima Nuclear Power Plant Accident and Comprehensive Health Risk Management—Global Radiocontamination and Information Disaster

    PubMed Central

    2014-01-01

    The Great East Japan Earthquake on March 11, 2011, besides further studying the appropriateness of the initial response and post-countermeasures against the severe Fukushima nuclear accident, has now increased the importance of the epidemiological study in comprehensive health risk management and radiation protection; lessons learnt from the Chernobyl accident should be also implemented. Therefore, since May 2011, Fukushima Prefecture has started the “Fukushima Health Management Survey Project” for the purpose of long-term health care administration and early diagnosis/treatment for the prefectural residents. Basic survey is under investigation on a retrospective estimation of external exposure of the first four months. As one of the four detailed surveys, the thyroid ultrasound examination has clarified the increased detection rate of childhood thyroid cancers as a screening effect in the past three years and so thyroid cancer occurrence by Fukushima nuclear power plant accident, especially due to radioactive iodine will be discussed despite of difficult challenge of accurate estimation of low dose and low-dose rate radiation exposures. Through the on-site valuable experience and a difficult challenge for recovery, we should learn the lessons from this severe and large-scale nuclear accident, especially how to countermeasure against public health emergency at the standpoint of health risk and also social risk management. PMID:25425958

  9. The Influence of Supportive and Ethical Work Environments on Work-Related Accidents, Injuries, and Serious Psychological Distress among Hospital Nurses.

    PubMed

    Tei-Tominaga, Maki; Nakanishi, Miharu

    2018-01-31

    The healthcare industry in Japan has experienced many cases of work-related injuries, accidents, and workers' compensation claims because of mental illness. This study examined the influence of supportive and ethical work environments on work-related accidents, injuries, and serious psychological distress among hospital nurses. Self-reported questionnaires were distributed to nurses ( n = 1114) from 11 hospitals. Valid responses ( n = 822, 93% women, mean age = 38.49 ± 10.09 years) were used for analyses. The questionnaire included items addressing basic attributes, work and organizational characteristics, social capital and ethical climate at the workplace, psychological distress, and experience of work-related accidents or injuries in the last half year. The final model of a multivariate logistic regression analysis revealed that those who work less than 4 h of overtime per week (OR = 0.313), those who work on days off more than once per month (OR = 0.424), and an exclusive workplace climate (OR = 1.314) were significantly associated with work-related accidents or injuries. Additionally, an exclusive workplace climate (OR = 1.696) elevated the risk of serious psychological distress. To prevent work-related compensation cases, which are caused by these variables, strengthening hospitals' occupational health and safety is necessary.

  10. THE MENTALLY RETARDED.

    ERIC Educational Resources Information Center

    JORDAN, THOMAS E.

    THIS BOOK PROVIDES A GUIDE TO THE BASIC CONCEPTS AND ISSUES IN THE FIELD OF MENTAL RETARDATION. THERE ARE MANY SOURCES OR CAUSES OF MENTAL RETARDATION AND THE FOLLOWING TYPES ARE EXPLAINED--(1) GENETIC OR CHEMICAL DISORDERS, (2) BIRTH TRAUMA, (3) SUBSEQUENT ACCIDENTS OR DISEASE, AND (4) ENVIRONMENTAL INFLUENCES. IT IS NOTED THAT MOST CASES INVOLVE…

  11. Key Parameters for Operator Diagnosis of BWR Plant Condition during a Severe Accident

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clayton, Dwight A.; Poore, III, Willis P.

    2015-01-01

    The objective of this research is to examine the key information needed from nuclear power plant instrumentation to guide severe accident management and mitigation for boiling water reactor (BWR) designs (specifically, a BWR/4-Mark I), estimate environmental conditions that the instrumentation will experience during a severe accident, and identify potential gaps in existing instrumentation that may require further research and development. This report notes the key parameters that instrumentation needs to measure to help operators respond to severe accidents. A follow-up report will assess severe accident environmental conditions as estimated by severe accident simulation model analysis for a specific US BWR/4-Markmore » I plant for those instrumentation systems considered most important for accident management purposes.« less

  12. The effects of aircraft certification rules on general aviation accidents

    NASA Astrophysics Data System (ADS)

    Anderson, Carolina Lenz

    The purpose of this study was to analyze the frequency of general aviation airplane accidents and accident rates on the basis of aircraft certification to determine whether or not differences in aircraft certification rules had an influence on accidents. In addition, the narrative cause descriptions contained within the accident reports were analyzed to determine whether there were differences in the qualitative data for the different certification categories. The certification categories examined were: Federal Aviation Regulations Part 23, Civil Air Regulations 3, Light Sport Aircraft, and Experimental-Amateur Built. The accident causes examined were those classified as: Loss of Control, Controlled Flight into Terrain, Engine Failure, and Structural Failure. Airworthiness certification categories represent a wide diversity of government oversight. Part 23 rules have evolved from the initial set of simpler design standards and have progressed into a comprehensive and strict set of rules to address the safety issues of the more complex airplanes within the category. Experimental-Amateur Built airplanes have the least amount of government oversight and are the fastest growing segment. The Light Sport Aircraft category is a more recent certification category that utilizes consensus standards in the approval process. Civil Air Regulations 3 airplanes were designed and manufactured under simpler rules but modifying these airplanes has become lengthy and expensive. The study was conducted using a mixed methods methodology which involves both quantitative and qualitative elements. A Chi-Square test was used for a quantitative analysis of the accident frequency among aircraft certification categories. Accident rate analysis of the accidents among aircraft certification categories involved an ANCOVA test. The qualitative component involved the use of text mining techniques for the analysis of the narrative cause descriptions contained within the accident reports. The Chi-Square test indicated that there was no significant difference in the number of accidents among the different certification categories when either Controlled Flight into Terrain or Structural Failure was listed as cause. However, there was a significant difference in the frequency of accidents with regard to Loss of Control and Engine Failure accidents. The results of the ANCOVA test indicated that there was no significant difference in the accident rate with regard to Loss of Control, Controlled Flight into Terrain, or Structural Failure accidents. There was, however, a significant difference in Engine Failure accidents between Experimental-Amateur Built and the other categories.The text mining analysis of the narrative causes of Loss of Control accidents indicated that only the Civil Air Regulations 3 category airplanes had clusters of words associated with visual flight into instrument meteorological conditions. Civil Air Regulations 3 airplanes were designed and manufactured prior to the 1960s and in most cases have not been retrofitted to take advantage of newer technologies that could help prevent Loss of Control accidents. The study indicated that General Aviation aircraft certification rules do not have a statistically significant effect on aircraft accidents except for Loss of Control and Engine Failure. According to the literature, government oversight could have become an obstacle in the implementation of safety enhancing equipment that could reduce Loss of Control accidents. Oversight should focus on ensuring that Experimental-Amateur Built aircraft owners perform a functional test that could prevent some of the Engine Failure accidents.

  13. Study of steam condensation at sub-atmospheric pressure: setting a basic research using MELCOR code

    NASA Astrophysics Data System (ADS)

    Manfredini, A.; Mazzini, M.

    2017-11-01

    One of the most serious accidents that can occur in the experimental nuclear fusion reactor ITER is the break of one of the headers of the refrigeration system of the first wall of the Tokamak. This results in water-steam mixture discharge in vacuum vessel (VV), with consequent pressurization of this container. To prevent the pressure in the VV exceeds 150 KPa absolute, a system discharges the steam inside a suppression pool, at an absolute pressure of 4.2 kPa. The computer codes used to analyze such incident (eg. RELAP 5 or MELCOR) are not validated experimentally for such conditions. Therefore, we planned a basic research, in order to have experimental data useful to validate the heat transfer correlations used in these codes. After a thorough literature search on this topic, ACTA, in collaboration with the staff of ITER, defined the experimental matrix and performed the design of the experimental apparatus. For the thermal-hydraulic design of the experiments, we executed a series of calculations by MELCOR. This code, however, was used in an unconventional mode, with the development of models suited respectively to low and high steam flow-rate tests. The article concludes with a discussion of the placement of experimental data within the map featuring the phenomenon characteristics, showing the importance of the new knowledge acquired, particularly in the case of chugging.

  14. Study of aircraft crashworthiness for fire protection

    NASA Technical Reports Server (NTRS)

    Cominsky, A.

    1981-01-01

    Impact-survivable postcrash fire accidents were surveyed. The data base developed includes foreign and domestic accidents involving airlines and jet aircraft. The emphasis was placed on domestic accidents, airlines, and jet aircraft due principally to availability of information. Only transport category aircraft in commercial service designed under FAR Part 25 were considered. A matrix was prepared to show the relationships between the accident characteristics and the fire fatalities. Typical postcrash fire scenaries were identified. Safety concepts were developed for three engineering categories: cabin interiors - cabin subsystems; power plant - engines and fuel systems; and structural mechanics - primary and secondary structures. The parameters identified for concept evaluation are cost, effectiveness, and societal concerns. Three concepts were selected for design definition and cost and effectiveness analysis: improved fire-resistant seat materials; anti-misting kerosene; and additional cabin emergency exits.

  15. An Approach for Assessing Consequences of Potential Supply Chain and Insider Contributed Cyber Attacks on Nuclear Power Plants

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chu, Tsong-Lun; Varuttamaseni, Athi; Baek, Joo-Seok

    This paper provides an approach for developing potential attacks on I and C systems of NPPs and assessing their consequences. An important concept is that the NPPs were not designed to cope with Stuxnet-type of attacks (and any other cyber attacks). That is, the plants were only designed for design basis accidents. The safety margins and redundancies built in the design are all based on design basis accidents. They may be helpful in mitigating cyberattacks, but may not be adequate.

  16. A Randomised Controlled Trial to Determine the Effectiveness of an Early Psychological Intervention with Children Involved in Road Traffic Accidents

    ERIC Educational Resources Information Center

    Stallard, Paul; Velleman, Richard; Salter, Emma; Howse, Imogen; Yule, William; Taylor, Gordon

    2006-01-01

    Objective: To determine whether an early intervention using a psychological debriefing format is effective in preventing psychological distress in child road traffic accident survivors. Design: Randomised controlled trial. Setting: Accident and Emergency Department, Royal United Hospital, Bath. Subjects: 158 children aged 7-18. Follow-up…

  17. Fukushima Daiichi Accident and Its Radiological Impact on the Environment

    ERIC Educational Resources Information Center

    Bevelacqua, J. J.

    2012-01-01

    The Fukushima Daiichi nuclear accident is a topic of current media and public interest. It provides a means to motivate students to understand the fission process and the barriers that have been designed to prevent the release of fission products to the environment following a major nuclear power reactor accident. The Fukushima Daiichi accident…

  18. A methodology for accident analysis of fusion breeder blankets and its application to helium-cooled lead–lithium blanket

    DOE PAGES

    Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew; ...

    2016-09-23

    'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials,more » and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.« less

  19. Interface requirements to couple thermal hydraulics codes to severe accident codes: ICARE/CATHARE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Camous, F.; Jacq, F.; Chatelard, P.

    1997-07-01

    In order to describe with the same code the whole sequence of severe LWR accidents, up to the vessel failure, the Institute of Protection and Nuclear Safety has performed a coupling of the severe accident code ICARE2 to the thermalhydraulics code CATHARE2. The resulting code, ICARE/CATHARE, is designed to be as pertinent as possible in all the phases of the accident. This paper is mainly devoted to the description of the ICARE2-CATHARE2 coupling.

  20. Failure Analysis Techniques for the Evaluation of Electrical and Electronic Components in Aircraft Accident Investigations

    DTIC Science & Technology

    1990-08-01

    of the review are presented in Tables 1 and 2 by aircraft and type of component. The totals for each component are combined in Table 3. Adjusted...of Table 3 have been grouped according to basic system functions and combined percentages for each of the basic functions have been computed as shown...and the free oxygen combines with the tungsten to form 29 Fig. 2.5 Notching of lamp aged 77 hours at 28 Volts DC. 2000X. (Reference 2.1) 30 DAMAGE

  1. Comparison of the accident process, radioactivity release and ground contamination between Chernobyl and Fukushima-1.

    PubMed

    Imanaka, Tetsuji; Hayashi, Gohei; Endo, Satoru

    2015-12-01

    In this report, we have reviewed the basic features of the accident processes and radioactivity releases that occurred in the Chernobyl accident (1986) and in the Fukushima-1 accident (2011). The Chernobyl accident was a power-surge accident that was caused by a failure of control of a fission chain reaction, which instantaneously destroyed the reactor and building, whereas the Fukushima-1 accident was a loss-of-coolant accident in which the reactor cores of three units were melted by decay heat after losing the electricity supply. Although the quantity of radioactive noble gases released from Fukushima-1 exceeded the amount released from Chernobyl, the size of land area severely contaminated by (137)Cesium ((137)Cs) was 10 times smaller around Fukushima-1 compared with around Chernobyl. The differences in the accident process are reflected in the composition of the discharged radioactivity as well as in the composition of the ground contamination. Volatile radionuclides (such as (132)Te-(132)I, (131)I, (134)Cs and (137)Cs) contributed to the gamma-ray exposure from the ground contamination around Fukishima-1, whereas a greater variety of radionuclides contributed significantly around Chernobyl. When radioactivity deposition occurred, the radiation exposure rate near Chernobyl is estimated to have been 770 μGy h(-1) per initial (137)Cs deposition of 1000 kBq m(-2), whereas it was 100 μGy h(-1) around Fukushima-1. Estimates of the cumulative exposure for 30 years are 970 and 570 mGy per initial deposition of 1000 kBq m(-2) for Chernobyl and Fukusima-1, respectively. Of these exposures, 49 and 98% were contributed by radiocesiums ((134)Cs + (137)Cs) around Chernobyl and Fukushima-1, respectively. © The Author 2015. Published by Oxford University Press on behalf of The Japan Radiation Research Society and Japanese Society for Radiation Oncology.

  2. [Retrospective analysis and prevention strategies for accidents associated with cervical manipulation in China].

    PubMed

    Wang, Hui-Hao; Zhan, Hong-Sheng; Zhang, Ming-Cai; Chen, Bo; Guo, Kai

    2012-09-01

    To review previously reported injuries cases which were associated with cervical manipulation in China, and to describe the risks and benefits of the therapy. Relevant case reports, review articles, surveys, and investigations regarding treatment of cervical spondylosis with cervical manipulation involving accidents and associated complication were retrived with a search of the literature from SinoMed, CNKI, CQVIP, and Wanfang digital databases between 1979 to March 2011. The data were extracted and statistically analyzed. Total of 150 cases of injury reported in 40 articles corresponded the inclusion criteria. Accidents occurred in 156 cases,of them,syncope was in 45 cases (28.85%), mild spinal cord injury or compression was in 34 cases (21.79%), nerve root injury was in 24 cases (15.38%), ineffective or symptom increased was in 11 cases (7.05%); cervical spine fracture was in 11 cases (7.05%), dislocation or semiluxation was in 6 cases (3.85%), soft tissue injury was in 3 cases (1.92%), serious accident was 22 cases (14.70%, including paralysis, death and cerebrovascular accident). In cases of serious accident, 12 cases (54.55%) had the other primary diseases. Types of related manipulation including rotation reduction (42.00%, 63 cases), rubbing points or muscle resulting strong stimulation (28.00%, 42 cases). 100 cases (66.67%) obtained cured or basically recovered results, 21 cases (14.00%) improved, 4 cases (2.67%) deterioration and 5 cases (3.33%) died. It is imperative for practitioners to complete the patients' management and assessment before manipulation. That the practitioners conduct a detailed physical examination and make a correct diagnosis would be a pivot method of avoiding accidents. Excluding contraindications and potential risks, standardizing evaluation criteria and practitioners' qualification, increasing safety awareness and risk assessment and strengthening the monitoring of the accidents could decrease the incidence of accidents.

  3. SLUDGE TREATMENT PROJECT KOP CONCEPTUAL DESIGN CONTROL DECISION REPORT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CARRO CA

    2010-03-09

    This control decision addresses the Knock-Out Pot (KOP) Disposition KOP Processing System (KPS) conceptual design. The KPS functions to (1) retrieve KOP material from canisters, (2) remove particles less than 600 {micro}m in size and low density materials from the KOP material, (3) load the KOP material into Multi-Canister Overpack (MCO) baskets, and (4) stage the MCO baskets for subsequent loading into MCOs. Hazard and accident analyses of the KPS conceptual design have been performed to incorporate safety into the design process. The hazard analysis is documented in PRC-STP-00098, Knock-Out Pot Disposition Project Conceptual Design Hazard Analysis. The accident analysismore » is documented in PRC-STP-CN-N-00167, Knock-Out Pot Disposition Sub-Project Canister Over Lift Accident Analysis. Based on the results of these analyses, and analyses performed in support of MCO transportation and MCO processing and storage activities at the Cold Vacuum Drying Facility (CVDF) and Canister Storage Building (CSB), control decision meetings were held to determine the controls required to protect onsite and offsite receptors and facility workers. At the conceptual design stage, these controls are primarily defined by their safety functions. Safety significant structures, systems, and components (SSCs) that could provide the identified safety functions have been selected for the conceptual design. It is anticipated that some safety SSCs identified herein will be reclassified based on hazard and accident analyses performed in support of preliminary and detailed design.« less

  4. Railroad special investigation report : Maryland Transit Administration light rail vehicle accidents at the Baltimore-Washington International Airport transit station near Baltimore, Maryland, February 13 and August 15, 2000

    DOT National Transportation Integrated Search

    2001-12-11

    In 2000, the Maryland Transit Administration experienced two similar accidents in the same location just 6 months apart. Both accidents involved the failure of a light rail vehicle train to stop at the designated stopping point at the Baltimore-Washi...

  5. Investigating accident causation through information network modelling.

    PubMed

    Griffin, T G C; Young, M S; Stanton, N A

    2010-02-01

    Management of risk in complex domains such as aviation relies heavily on post-event investigations, requiring complex approaches to fully understand the integration of multi-causal, multi-agent and multi-linear accident sequences. The Event Analysis of Systemic Teamwork methodology (EAST; Stanton et al. 2008) offers such an approach based on network models. In this paper, we apply EAST to a well-known aviation accident case study, highlighting communication between agents as a central theme and investigating the potential for finding agents who were key to the accident. Ultimately, this work aims to develop a new model based on distributed situation awareness (DSA) to demonstrate that the risk inherent in a complex system is dependent on the information flowing within it. By identifying key agents and information elements, we can propose proactive design strategies to optimize the flow of information and help work towards avoiding aviation accidents. Statement of Relevance: This paper introduces a novel application of an holistic methodology for understanding aviation accidents. Furthermore, it introduces an ongoing project developing a nonlinear and prospective method that centralises distributed situation awareness and communication as themes. The relevance of findings are discussed in the context of current ergonomic and aviation issues of design, training and human-system interaction.

  6. Light Water Reactor Sustainability Program Reactor Safety Technologies Pathway Technical Program Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Corradini, M. L.; Peko, D.; Farmer, M.

    In the aftermath of the March 2011 multi-unit accident at the Fukushima Daiichi nuclear power plant (Fukushima), the nuclear community has been reassessing certain safety assumptions about nuclear reactor plant design, operations and emergency actions, particularly with respect to extreme events that might occur and that are beyond each plant’s current design basis. Because of our significant domestic investment in nuclear reactor technology (99 operating reactors in the fleet of commercial LWRs with five under construction), the United States has been a major leader internationally in these activities. The U.S. nuclear industry is voluntarily pursuing a number of additional safetymore » initiatives. The NRC continues to evaluate and, where deemed appropriate, establish new requirements for ensuring adequate protection of public health and safety in the occurrence of low probability events at nuclear plants; (e.g., mitigation strategies for beyond design basis events initiated by external events like seismic or flooding initiators). The DOE has also played a major role in the U.S. response to the Fukushima accident. Initially, DOE worked with the Japanese and the international community to help develop a more complete understanding of the Fukushima accident progression and its consequences, and to respond to various safety concerns emerging from uncertainties about the nature of and the effects from the accident. DOE R&D activities are focused on providing scientific and technical insights, data, analyses methods that ultimately support industry efforts to enhance safety. These activities are expected to further enhance the safety performance of currently operating U.S. nuclear power plants as well as better characterize the safety performance of future U.S. plants. In pursuing this area of R&D, DOE recognizes that the commercial nuclear industry is ultimately responsible for the safe operation of licensed nuclear facilities. As such, industry is considered the primary “end user” of the results from this DOE-sponsored work. The response to the Fukushima accident has been global, and there is a continuing multinational interest in collaborations to better quantify accident consequences and to incorporate lessons learned from the accident. DOE will continue to seek opportunities to facilitate collaborations that are of value to the U.S. industry, particularly where the collaboration provides access to vital data from the accident or otherwise supports or leverages other important R&D work. The purpose of the Reactor Safety Technology R&D is to improve understanding of beyond design basis events and reduce uncertainty in severe accident progression, phenomenology, and outcomes using existing analytical codes and information gleaned from severe accidents, in particular the Fukushima Daiichi events. This information will be used to aid in developing mitigating strategies and improving severe accident management guidelines for the current light water reactor fleet.« less

  7. Light Water Reactor Sustainability Program: Reactor Safety Technologies Pathway Technical Program Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Corradini, M. L.

    In the aftermath of the March 2011 multi-unit accident at the Fukushima Daiichi nuclear power plant (Fukushima), the nuclear community has been reassessing certain safety assumptions about nuclear reactor plant design, operations and emergency actions, particularly with respect to extreme events that might occur and that are beyond each plant’s current design basis. Because of our significant domestic investment in nuclear reactor technology (99 operating reactors in the fleet of commercial LWRs with five under construction), the United States has been a major leader internationally in these activities. The U.S. nuclear industry is voluntarily pursuing a number of additional safetymore » initiatives. The NRC continues to evaluate and, where deemed appropriate, establish new requirements for ensuring adequate protection of public health and safety in the occurrence of low probability events at nuclear plants; (e.g., mitigation strategies for beyond design basis events initiated by external events like seismic or flooding initiators). The DOE has also played a major role in the U.S. response to the Fukushima accident. Initially, DOE worked with the Japanese and the international community to help develop a more complete understanding of the Fukushima accident progression and its consequences, and to respond to various safety concerns emerging from uncertainties about the nature of and the effects from the accident. DOE R&D activities are focused on providing scientific and technical insights, data, analyses methods that ultimately support industry efforts to enhance safety. These activities are expected to further enhance the safety performance of currently operating U.S. nuclear power plants as well as better characterize the safety performance of future U.S. plants. In pursuing this area of R&D, DOE recognizes that the commercial nuclear industry is ultimately responsible for the safe operation of licensed nuclear facilities. As such, industry is considered the primary “end user” of the results from this DOE-sponsored work. The response to the Fukushima accident has been global, and there is a continuing multinational interest in collaborations to better quantify accident consequences and to incorporate lessons learned from the accident. DOE will continue to seek opportunities to facilitate collaborations that are of value to the U.S. industry, particularly where the collaboration provides access to vital data from the accident or otherwise supports or leverages other important R&D work. The purpose of the Reactor Safety Technology R&D is to improve understanding of beyond design basis events and reduce uncertainty in severe accident progression, phenomenology, and outcomes using existing analytical codes and information gleaned from severe accidents, in particular the Fukushima Daiichi events. This information will be used to aid in developing mitigating strategies and improving severe accident management guidelines for the current light water reactor fleet.« less

  8. Evaluation of safety treatments for roadside culverts.

    DOT National Transportation Integrated Search

    2009-04-24

    Roadside cross-drainage culverts have been found to impact vehicle accident injury levels. : Designers have commonly used three safety treatments to protect errant drivers from culvert accidents. : These treatments have included: culvert extension, g...

  9. Bus 54 -- Where are you? A school bus intelligent information system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Truett, L.F.; Moore, S.; Tonn, B.

    1998-07-01

    Although major accidents involving school buses are rare (only about 0.3% of all fatal crashes since 1986 are classified as school-bus-related), even minor accidents and breakdowns cause a great deal of parental anxiety. The objective of this research is to design an efficient, cost-effective, accurate, and secure system that will track individual school buses and communicate appropriate information to the school system`s central administration unit, to the school transportation administrator, and to parents of children on the bus. The greatest benefit of the proposed information system is that parents and officials can always know the location and condition (these conditionsmore » would vary depending on the needs of a particular school system) of the school buses. In case of an accident or mechanical problem, when emergency crews are needed, they can be dispatched almost immediately with a good understanding of the problem and the exact location of the bus. In addition to being able to track the bus while the child is on board, parents will be able to determine the location of their child`s bus prior to its arrival in the morning in order to prevent the child from needing to wait outside in inclement weather. The information available to parents can also be expanded to include maps of limited routes (e.g., snow routes). Basically, the Bus 54 concept consists of a bus component and a central data processing unit. Each bus will be outfitted with a global positioning satellite (GPS) device, a wireless communication device, and wireless data communication service. The central data processing unit will receive and process information from the buses and provide information access to parents and officials via an Internet link.« less

  10. Space operations and the human factor

    NASA Astrophysics Data System (ADS)

    Brody, Adam R.

    1993-10-01

    Although space flight does not put the public at high risk, billions of dollars in hardware are destroyed and the space program halted when an accident occurs. Researchers are therefore applying human-factors techniques similar to those used in the aircraft industry, albeit at a greatly reduced level, to the spacecraft environment. The intent is to reduce the likelihood of catastrophic failure. To increase safety and efficiency, space human factors researchers have simulated spacecraft docking and extravehicular activity rescue. Engineers have also studied EVA suit mobility and aids. Other basic human-factors issues that have been applied to the space environment include antropometry, biomechanics, and ergonomics. Workstation design, workload, and task analysis currently receive much attention, as do habitability and other aspects of confined environments. Much work also focuses on individual payloads, as each presents its own complexities.

  11. Evaluation of synthesized voice approach callouts /SYNCALL/

    NASA Technical Reports Server (NTRS)

    Simpson, C. A.

    1981-01-01

    The two basic approaches to the generation of 'synthesized' speech include a utilization of analog recorded human speech and a construction of speech entirely from algorithms applied to constants describing speech sounds. Given the availability of synthesized speech displays for man-machine systems, research is needed to study suggested applications for speech and design principles for speech displays. The present investigation is concerned with a study for which new performance measures were developed. A number of air carrier approach and landing accidents during low or impaired visibility have been associated with the absence of approach callouts. The study had the purpose to compare a pilot-not-flying (PNF) approach callout system to a system composed of PNF callouts augmented by an automatic synthesized voice callout system (SYNCALL). Pilots were found to favor the use of a SYNCALL system containing certain modifications.

  12. 10 CFR Appendix A to Part 52 - Design Certification Rule for the U.S. Advanced Boiling Water Reactor

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) of 10 CFR 50.34—Post-Accident Sampling for Boron, Chloride, and Dissolved Gases; and 3. Paragraph (f... affecting resolution of an ex-vessel severe accident design feature identified in the plant-specific DCD, requires a license amendment if: (1) There is a substantial increase in the probability of an ex-vessel...

  13. 10 CFR Appendix B to Part 52 - Design Certification Rule for the System 80+ Design

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... Paragraph (f)(2)(viii) of 10 CFR 50.34—Post-Accident Sampling for Hydrogen, Boron, Chloride, and Dissolved... or in the safety analyses. c. A proposed departure from Tier 2 affecting resolution of an ex-vessel...) There is a substantial increase in the probability of an ex-vessel severe accident such that a...

  14. 10 CFR Appendix B to Part 52 - Design Certification Rule for the System 80+ Design

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... Paragraph (f)(2)(viii) of 10 CFR 50.34—Post-Accident Sampling for Hydrogen, Boron, Chloride, and Dissolved... or in the safety analyses. c. A proposed departure from Tier 2 affecting resolution of an ex-vessel...) There is a substantial increase in the probability of an ex-vessel severe accident such that a...

  15. 10 CFR Appendix B to Part 52 - Design Certification Rule for the System 80+ Design

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... Paragraph (f)(2)(viii) of 10 CFR 50.34—Post-Accident Sampling for Hydrogen, Boron, Chloride, and Dissolved... or in the safety analyses. c. A proposed departure from Tier 2 affecting resolution of an ex-vessel...) There is a substantial increase in the probability of an ex-vessel severe accident such that a...

  16. 10 CFR Appendix B to Part 52 - Design Certification Rule for the System 80+ Design

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... Paragraph (f)(2)(viii) of 10 CFR 50.34—Post-Accident Sampling for Hydrogen, Boron, Chloride, and Dissolved... or in the safety analyses. c. A proposed departure from Tier 2 affecting resolution of an ex-vessel...) There is a substantial increase in the probability of an ex-vessel severe accident such that a...

  17. 10 CFR Appendix B to Part 52 - Design Certification Rule for the System 80+ Design

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... Paragraph (f)(2)(viii) of 10 CFR 50.34—Post-Accident Sampling for Hydrogen, Boron, Chloride, and Dissolved... or in the safety analyses. c. A proposed departure from Tier 2 affecting resolution of an ex-vessel...) There is a substantial increase in the probability of an ex-vessel severe accident such that a...

  18. The role of usability in the evaluation of accidents: human error or design flaw?

    PubMed

    Correia, Walter; Soares, Marcelo; Barros, Marina; Campos, Fábio

    2012-01-01

    This article aims to highlight the role of consumer products companies in the heart and the extent of accidents involving these types of products, and as such undesired events take part as an agent in influencing decision making for the purchase of a product that nature on the part of consumers and users. The article demonstrates, by reference, interviews and case studies such as the development of poorly designed products and design errors of design can influence the usage behavior of users, thus leading to accidents, and also negatively affect the next image of a company. The full explanation of these types of questions aims to raise awareness, plan on a reliable usability, users and consumers in general about the safe use of consumer products, and also safeguard their rights before a legal system of consumer protection, even far away by the CDC--Code of Consumer Protection.

  19. [Rehabilitation of hand injured co-workers from the occupational medicine viewpoint (exemplified by a chassis and montage automobile industry].

    PubMed

    Harwerth, A

    1997-07-01

    The majority (about 25%) of work-related accidents involves injuries to the hands and fingers. Depending on type and severity of the injury, it can have profound consequences to an individual's professional future. Due to this basic insight, hand rehabilitation must include vocational rehabilitation.

  20. Georgia Kids Count Factbook, 1998-99.

    ERIC Educational Resources Information Center

    Georgians for Children, Atlanta, GA.

    This Kids Count factbook presents statistical data and examines trends for 10 indicators of children's well-being in Georgia. The indicators are: (1) low birthweight babies; (2) infant mortality; (3) child deaths; (4) teen deaths by accident, homicide, and suicide; (5) juvenile arrests; (6) reading and math scores on the Iowa Test of Basic Skills;…

  1. Agricultural Safety. FMO: Fundamentals of Machine Operation. Second Edition.

    ERIC Educational Resources Information Center

    John Deere Co., Moline, IL.

    This manual is intended to provide students with basic information on the safe operation of farm machinery. The following topics are covered in the individual chapters: safe farm machinery operation (the importance of safety, the role of communication in safety, and types of farm accidents); human factors (human limitations and capabilities;…

  2. Teacher Liability in School-Shop Accidents.

    ERIC Educational Resources Information Center

    Kegin, Denis J.

    The intent of the book is to stimulate interest in the problem of shop-teacher liability and to identify certain needs which have not been adequately met by existing laws and statutes. Chapter 1, The Significance of Teacher Liability, discusses basic legal considerations, the environment of the school shop, and the possibility of liability.…

  3. Distribution and ecological risk assessment of cadmium in water and sediment in Longjiang River, China: Implication on water quality management after pollution accident.

    PubMed

    Zhao, Xue-Min; Yao, Ling-Ai; Ma, Qian-Li; Zhou, Guang-Jie; Wang, Li; Fang, Qiao-Li; Xu, Zhen-Cheng

    2018-03-01

    In early January 2012, the Longjiang River was subjected to a serious cadmium (Cd) pollution accident, which led to negatively environmental and social impacts. A series of measures of emergency treatment were subsequently taken to reduce water Cd level. However, little information was available about the change of Cd level in environmental matrices and long-term effect of this pollution accident to aquatic ecosystem. Thus, this study investigated the distribution of Cd in water and sediment of this river for two years since pollution accident, as well as assessed its ecological risk to aquatic ecosystem of Longjiang River. The results showed that it was efficient for taking emergency treatment measures to decrease water Cd concentration to below the threshold value of national drinking water quality standard of China. There was high risk (HQ > 1) to aquatic ecosystem in some of reaches between February and July 2012, but low or no risk (HQ < 1) between December 2012 to December 2013. Cd concentration in sediment in polluted reaches increased after pollution accident and emergency treatments in 2012, but decreased in 2013. During flood period, the sediment containing high concentration of Cd in Longjiang River was migrated to downstream Liujiang River. Cd content in sediment was reduced to background level after two years of the pollution accident occurrence. The study provides basic information about Cd levels in different media after pollution accident, which is helpful in evaluating the effectiveness of emergency treatments and the variation of ecological risk, as well as in conducting water management and conservation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Empirical Bayesian Geographical Mapping of Occupational Accidents among Iranian Workers.

    PubMed

    Vahabi, Nasim; Kazemnejad, Anoshirvan; Datta, Somnath

    2017-05-01

    Work-related accidents are believed to be a serious preventable cause of mortality and disability worldwide. This study aimed to provide Bayesian geographical maps of occupational injury rates among workers insured by the Iranian Social Security Organization. The participants included all insured workers in the Iranian Social Security Organization database in 2012. One of the applications of the Bayesian approach called the Poisson-Gamma model was applied to estimate the relative risk of occupational accidents. Data analysis and mapping were performed using R 3.0.3, Open-Bugs 3.2.3 rev 1012 and ArcMap9.3. The majority of all 21,484 investigated occupational injury victims were male (98.3%) including 16,443 (76.5%) single workers aged 20 - 29 years. The accidents were more frequent in basic metal, electric, and non-electric machining jobs. About 0.4% (96) of work-related accidents led to death, 2.2% (457) led to disability (partial and total), 4.6% (980) led to fixed compensation, and 92.8% (19,951) of the injured victims recovered completely. The geographical maps of estimated relative risk of occupational accidents were also provided. The results showed that the highest estimations pertained to provinces which were mostly located along mountain chains, some of which are categorized as deprived provinces in Iran. The study revealed the need for further investigation of the role of economic and climatic factors in high risk areas. The application of geographical mapping together with statistical approaches can provide more accurate tools for policy makers to make better decisions in order to prevent and reduce the risks and adverse outcomes of work-related accidents.

  5. Preliminary calculations related to the accident at Three Mile Island

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kirchner, W.L.; Stevenson, M.G.

    This report discusses preliminary studies of the Three Mile Island Unit 2 (TMI-2) accident based on available methods and data. The work reported includes: (1) a TRAC base case calculation out to 3 hours into the accident sequence; (2) TRAC parametric calculations, these are the same as the base case except for a single hypothetical change in the system conditions, such as assuming the high pressure injection (HPI) system operated as designed rather than as in the accident; (3) fuel rod cladding failure, cladding oxidation due to zirconium metal-steam reactions, hydrogen release due to cladding oxidation, cladding ballooning, cladding embrittlement,more » and subsequent cladding breakup estimates based on TRAC calculated cladding temperatures and system pressures. Some conclusions of this work are: the TRAC base case accident calculation agrees very well with known system conditions to nearly 3 hours into the accident; the parametric calculations indicate that, loss-of-core cooling was most influenced by the throttling of High-Pressure Injection (HPI) flows, given the accident initiating events and the pressurizer electromagnetic-operated valve (EMOV) failing to close as designed; failure of nearly all the rods and gaseous fission product gas release from the failed rods is predicted to have occurred at about 2 hours and 30 minutes; cladding oxidation (zirconium-steam reaction) up to 3 hours resulted in the production of approximately 40 kilograms of hydrogen.« less

  6. A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

    PubMed

    Wachter, Jan K; Yorio, Patrick L

    2014-07-01

    The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. 77 FR 60481 - Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Post-Accident...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-03

    ...The U.S. Nuclear Regulatory Commission (NRC or the Commission) is issuing a revision to Regulatory Guide (RG) 1.52, ``Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Post-accident Engineered-Safety-Feature Atmosphere Cleanup Systems in Light-Water-Cooled Nuclear Power Plants.'' This guide applies to the design, inspection, and testing of air filtration and iodine adsorption units of engineered-safety-feature (ESF) atmosphere cleanup systems in light-water-cooled nuclear power plants.

  8. Glider accidents: an analysis of 143 cases, 2001-2005.

    PubMed

    van Doorn, Robert R A; de Voogt, Alexander J

    2007-01-01

    The majority of aviation crashes and casualties take place in general and sport aviation. Although gliding has gained popularity in recent decades, we could find no systematic analysis of glider accidents. This study determined factors associated with both non-fatal and fatal glider accidents to document their position within sport and general aviation accidents, and to suggest preventive measures and improvements. We performed a retrospective review of glider accidents for the period 2001-2005 in the database maintained by the U.S. National Transportation Safety Board (NTSB). A total of 117 non-fatal and 26 fatal glider accidents were reported for the 5-yr period. Adverse weather was the cause in 20% of all non-fatal accidents, 60% of which occurred in the cruise phase. Logistic regression revealed that fatal accidents were predicted by pilot error, flight phase, and home-built aircraft. Factors contributing to glider crashes are specific to this type of sport aviation. Owners of home-built gliders should pay particular attention to the aircraft's specifications and design limits.

  9. Farm accidents in children.

    PubMed Central

    Cameron, D.; Bishop, C.; Sibert, J. R.

    1992-01-01

    OBJECTIVE--To examine the problem of accidental injury to children on farms. DESIGN--Prospective county based study of children presenting to accident and emergency departments over 12 months with injuries sustained in a farm setting and nationwide review of fatal childhood farm accidents over the four years April 1986 to March 1990. SETTING--Accident and emergency departments in Aberystwyth, Carmarthen, Haverfordwest, and Llanelli and fatal accidents in England, Scotland, and Wales notified to the Health and Safety Executive register. SUBJECTS--Children aged under 16. MAIN OUTCOME MEASURE--Death or injury after farm related accidents. RESULTS--65 accidents were recorded, including 18 fractures. Nine accidents necessitated admission to hospital for a mean of two (range one to four) days. 13 incidents were related to tractors and other machinery; 24 were due to falls. None of these incidents were reported under the statutory notification scheme. 33 deaths were notified, eight related to tractors and allied machinery and 10 related to falling objects. CONCLUSIONS--Although safety is improving, the farm remains a dangerous environment for children. Enforcement of existing safety legislation with significant penalties and targeting of safety education will help reduce accident rates further. PMID:1638192

  10. Methods for nuclear air-cleaning-system accident-consequence assessment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Andrae, R.W.; Bolstad, J.W.; Gregory, W.S.

    1982-01-01

    This paper describes a multilaboratory research program that is directed toward addressing many questions that analysts face when performing air cleaning accident consequence assessments. The program involves developing analytical tools and supportive experimental data that will be useful in making more realistic assessments of accident source terms within and up to the atmospheric boundaries of nuclear fuel cycle facilities. The types of accidents considered in this study includes fires, explosions, spills, tornadoes, criticalities, and equipment failures. The main focus of the program is developing an accident analysis handbook (AAH). We will describe the contents of the AAH, which include descriptionsmore » of selected nuclear fuel cycle facilities, process unit operations, source-term development, and accident consequence analyses. Three computer codes designed to predict gas and material propagation through facility air cleaning systems are described. These computer codes address accidents involving fires (FIRAC), explosions (EXPAC), and tornadoes (TORAC). The handbook relies on many illustrative examples to show the analyst how to approach accident consequence assessments. We will use the FIRAC code and a hypothetical fire scenario to illustrate the accident analysis capability.« less

  11. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew

    'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials,more » and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.« less

  12. The amount of consolation compensation in road traffic accidents.

    PubMed

    Jou, Rong-Chang

    2014-06-01

    This study aimed to investigate the amount of consolation compensation that road accident perpetrators were willing to pay victims. It used 2010 statistics for general road accidents from Taiwan's National Police Agency (NPA) for further sampling and to mail questionnaires. In investigating consolation compensation, the framework of the contingent valuation method was used, and the data were collected through the design of different scenarios. In this study, five injury levels were designed to further analyse the consolation compensation price the perpetrators were willing to pay: minor injury, moderate injury, serious injury, disability, and death. The results revealed the price that many perpetrators were willing to pay was zero; however, we overcame this issue by using the Spike model. The estimated results showed that road accident perpetrators were willing to pay more consolation compensation with increased injury severity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Risk perception in consumer product use.

    PubMed

    Weegels, M F; Kanis, H

    2000-05-01

    In the literature, at least two distinct connotations of risk can be found: so called objective risk, defined as the ratio of a particular number of accidents and a measure of exposure, and subjective risk, defined as the perception and awareness of risks by the person(s) involved. This article explores the significance of risk perception and awareness in understanding and clarifying how and why accidents involving consumer products occur. Based on empirical evidence from video-recorded reconstructions of accidents with consumer products, the risk perception and awareness of users in relation to featural and functional product characteristics, and their influence on actual product use culminating in an accident, is addressed. In contrast with what is usually assumed in the literature, the findings show that the majority of the subjects had no idea that they were running any risk of injuring themselves while they operated the product. In several accidents, the product either offered functionalities not anticipated in the design or did not adequately reflect its condition. The implications of the findings for design practice as well as for risk research are discussed.

  14. Consequences and countermeasures in a nuclear power accident: Chernobyl experience.

    PubMed

    Kirichenko, Vladimir A; Kirichenko, Alexander V; Werts, Day E

    2012-09-01

    Despite the tragic accidents in Fukushima and Chernobyl, the nuclear power industry will continue to contribute to the production of electric energy worldwide until there are efficient and sustainable alternative sources of energy. The Chernobyl nuclear accident, which occurred 26 years ago in the former Soviet Union, released an immense amount of radioactivity over vast territories of Belarus, Ukraine, and the Russian Federation, extending into northern Europe, and became the most severe accident in the history of the nuclear industry. This disaster was a result of numerous factors including inadequate nuclear power plant design, human errors, and violation of safety measures. The lessons learned from nuclear accidents will continue to strengthen the safety design of new reactor installations, but with more than 400 active nuclear power stations worldwide and 104 reactors in the Unites States, it is essential to reassess fundamental issues related to the Chernobyl experience as it continues to evolve. This article summarizes early and late events of the incident, the impact on thyroid health, and attempts to reduce agricultural radioactive contamination.

  15. Metrics for the technical performance evaluation of light water reactor accident-tolerant fuel

    DOE PAGES

    Bragg-Sitton, Shannon M.; Todosow, Michael; Montgomery, Robert; ...

    2017-03-26

    The safe, reliable, and economic operation of the nation’s nuclear power reactor fleet has always been a top priority for the nuclear industry. Continual improvement of technology, including advanced materials and nuclear fuels, remains central to the industry’s success. Enhancing the accident tolerance of light water reactors (LWRs) became a topic of serious discussion following the 2011 Great East Japan Earthquake, resulting tsunami, and subsequent damage to the Fukushima Daiichi nuclear power plant complex. The overall goal for the development of accident-tolerant fuel (ATF) for LWRs is to identify alternative fuel system technologies to further enhance the safety, competitiveness, andmore » economics of commercial nuclear power. Designed for use in the current fleet of commercial LWRs or in reactor concepts with design certifications (GEN-III+), fuels with enhanced accident tolerance would endure loss of active cooling in the reactor core for a considerably longer period of time than the current fuel system while maintaining or improving performance during normal operations. The complex multiphysics behavior of LWR nuclear fuel in the integrated reactor system makes defining specific material or design improvements difficult; as such, establishing desirable performance attributes is critical in guiding the design and development of fuels and cladding with enhanced accident tolerance. Research and development of ATF in the United States is conducted under the U.S. Department of Energy (DOE) Fuel Cycle Research and Development Advanced Fuels Campaign. The DOE is sponsoring multiple teams to develop ATF concepts within multiple national laboratories, universities, and the nuclear industry. Concepts under investigation offer both evolutionary and revolutionary changes to the current nuclear fuel system. This study summarizes the technical evaluation methodology proposed in the United States to aid in the optimization and prioritization of candidate ATF designs.« less

  16. [Diagnosis and treatment of diving accidents. New German guidelines for diving accidents 2014-2017].

    PubMed

    Jüttner, B; Wölfel, C; Liedtke, H; Meyne, K; Werr, H; Bräuer, T; Kemmerer, M; Schmeißer, G; Piepho, T; Müller, O; Schöppenthau, H

    2015-06-01

    In 2015 the German Society for Diving and Hyperbaric Medicine (GTÜM) and the Swiss Underwater and Hyperbaric Medical Society (SUHMS) published the updated guidelines on diving accidents 2014-2017. These multidisciplinary guidelines were developed within a structured consensus process by members of the German Interdisciplinary Association for Intensive Care and Emergency Medicine (DIVI), the Sports Divers Association (VDST), the Naval Medical Institute (SchiffMedInst), the Social Accident Insurance Institution for the Building Trade (BG BAU), the Association of Hyperbaric Treatment Centers (VDD) and the Society of Occupational and Environmental Medicine (DGAUM). This consensus-based guidelines project (development grade S2k) with a representative group of developers was conducted by the Association of Scientific Medical Societies in Germany. It provides information and instructions according to up to date evidence to all divers and other lay persons for first aid recommendations to physician first responders and emergency physicians as well as paramedics and all physicians at therapeutic hyperbaric chambers for the diagnostics and treatment of diving accidents. To assist in implementing the guideline recommendations, this article summarizes the rationale, purpose and the following key action statements: on-site 100% oxygen first aid treatment, still patient positioning and fluid administration are recommended. Hyperbaric oxygen (HBO) recompression remains unchanged the established treatment in severe cases with no therapeutic alternatives. The basic treatment scheme recommended for diving accidents is hyperbaric oxygenation at 280 kPa. For quality management purposes there is a need in the future for a nationwide register of hyperbaric therapy.

  17. Aircraft Accident Investigation at ARL: The First 50 Years

    DTIC Science & Technology

    1993-03-01

    monoplane with vee strut bracing. Designed by De Havillands as the DH . 80A, it proved highly successful; two hundred and sixty were built in the UK...3 4. THE PUSS MOTH ACCIDENTS ............................................................ 5 5. THE DH .86 ACCIDENTS...Melbourne and just as the royal procession was turning from St Kilda Road into the grounds of Government House, two DH .9 aircraft of the RAAF flypast collided

  18. Developing strategies for maintaining tank car integrity during train accidents

    DOT National Transportation Integrated Search

    2007-09-11

    Accidents that lead to rupture of tank cars carrying : hazardous materials can cause serious public safety hazards and : substantial economic losses. The desirability of improved tank : car designs that are better equipped to keep the commodity : con...

  19. Safety Evaluation Of Intelligent Transportation Systems, Workshop Proceedings

    DOT National Transportation Integrated Search

    1995-05-01

    IMPROVED SAFETY IS PRESENTED AS AN IMPORTANT POTENTIAL BENEFIT OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS). SYSTEMS ARE EMERGING AND ARE UNDER DEVELOPMENT THAT ARE DESIGNED TO REDUCE THE NUMBER OF ACCIDENTS AND THE SEVERITY OF THOSE ACCIDENTS THAT CA...

  20. Implicit time-integration method for simultaneous solution of a coupled non-linear system

    NASA Astrophysics Data System (ADS)

    Watson, Justin Kyle

    Historically large physical problems have been divided into smaller problems based on the physics involved. This is no different in reactor safety analysis. The problem of analyzing a nuclear reactor for design basis accidents is performed by a handful of computer codes each solving a portion of the problem. The reactor thermal hydraulic response to an event is determined using a system code like TRAC RELAP Advanced Computational Engine (TRACE). The core power response to the same accident scenario is determined using a core physics code like Purdue Advanced Core Simulator (PARCS). Containment response to the reactor depressurization in a Loss Of Coolant Accident (LOCA) type event is calculated by a separate code. Sub-channel analysis is performed with yet another computer code. This is just a sample of the computer codes used to solve the overall problems of nuclear reactor design basis accidents. Traditionally each of these codes operates independently from each other using only the global results from one calculation as boundary conditions to another. Industry's drive to uprate power for reactors has motivated analysts to move from a conservative approach to design basis accident towards a best estimate method. To achieve a best estimate calculation efforts have been aimed at coupling the individual physics models to improve the accuracy of the analysis and reduce margins. The current coupling techniques are sequential in nature. During a calculation time-step data is passed between the two codes. The individual codes solve their portion of the calculation and converge to a solution before the calculation is allowed to proceed to the next time-step. This thesis presents a fully implicit method of simultaneous solving the neutron balance equations, heat conduction equations and the constitutive fluid dynamics equations. It discusses the problems involved in coupling different physics phenomena within multi-physics codes and presents a solution to these problems. The thesis also outlines the basic concepts behind the nodal balance equations, heat transfer equations and the thermal hydraulic equations, which will be coupled to form a fully implicit nonlinear system of equations. The coupling of separate physics models to solve a larger problem and improve accuracy and efficiency of a calculation is not a new idea, however implementing them in an implicit manner and solving the system simultaneously is. Also the application to reactor safety codes is new and has not be done with thermal hydraulics and neutronics codes on realistic applications in the past. The coupling technique described in this thesis is applicable to other similar coupled thermal hydraulic and core physics reactor safety codes. This technique is demonstrated using coupled input decks to show that the system is solved correctly and then verified by using two derivative test problems based on international benchmark problems the OECD/NRC Three mile Island (TMI) Main Steam Line Break (MSLB) problem (representative of pressurized water reactor analysis) and the OECD/NRC Peach Bottom (PB) Turbine Trip (TT) benchmark (representative of boiling water reactor analysis).

  1. Greener is Cleaner, and Safer

    ERIC Educational Resources Information Center

    Science Scope, 2005

    2005-01-01

    One easy way to reduce the number of accidents in the lab is to go "green." Green chemistry, or sustainable chemistry, emerged about a decade ago, but the concept has been practiced for centuries by indigenous people of many continents. The basic principles of green chemistry are that you should use only what you need and recycle what you can.…

  2. Deployment Health Surveillance

    DTIC Science & Technology

    2004-06-01

    executing a rigorous pre- and post- deployment health screening program. Our healthcare providers practice preventive medicine, promote healthy lifestyles ...individual responsibility for their health and fitness. This includes avoidance of unhealthy behaviors like alcohol abuse and cigarette smoking...due to accident or disease. The basic principles of disease prevention in the field really haven’t changed much. Hand washing, food sanitation

  3. RADIOACTIVE CONTAMINATION OF FOODS. PROBLEMS IN THE FOOD CONSUMPTION OF THE ITALIAN POPULATION

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ferro-Luzzi, A.; Mariani, A.

    The aspects of health physics that are basically applications of physics are reviewed. Units of radiation measurement, RBE, permissible doses, personnel monitoring, applications of radiation spectrometry, and measurement of body activity are considered, as well as the release, dispersion, and deposition of radioactive material in reactor accidents. 140 references. (D.C.W.)

  4. Compliance Issues and Homeland Security with New Federal Regulations for Higher Education Institutions

    ERIC Educational Resources Information Center

    Valcik, Nicolas A.

    2010-01-01

    Research advancements into different fields of study have increased the risks for accidents, criminal acts, or a potential breach of national security, and the types of hazardous materials (HAZMAT) stored and used at universities and colleges are under new scrutiny. Before, a chemistry laboratory might only have basic substances such as sulfur,…

  5. "Pursuing a Lifetime of Healthful Physical Activity" through Falling and Rolling

    ERIC Educational Resources Information Center

    Kozub, Francis M.; Hogan, John T.

    2013-01-01

    The basic movement concepts associated with falling and rolling are needed for many dynamic adult activities. This is the case any time the activity, either by intent or accident, involves safely transitioning from a standing position to the ground quickly. Failure to teach these skills in school physical education could result in a barrier to…

  6. It's No Accident: A Consumer Product Safety Education Curriculum Resource Guide for Teachers of Grades 3 through 6.

    ERIC Educational Resources Information Center

    Consumer Product Safety Commission, Washington, DC.

    This guide for teachers contains product safety information appropriate for young children and suggests learning activities for third through sixth graders. Activities encourage children to examine their home environments for safety hazards and to share this information with family and friends. Unit 1 introduces five basic safety concepts upon…

  7. Engine Non-Containment: The UK CAA View

    NASA Technical Reports Server (NTRS)

    Gunstone, G. L.

    1977-01-01

    Airworthiness accidents account for roughly one quarter of the total number of accidents to public transport turbojet aircraft. The most reliable, practicable, and cost-effective means of minimizing damage outside the confines of the nacelle is to make the aircraft design invulnerable to any debris which may affect the aircraft. A failure model was developed for use by aircraft builders in measuring the freedom from catastrophe factor of their design.

  8. Current and anticipated use of thermal-hydraulic codes for BWR transient and accident analyses in Japan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arai, Kenji; Ebata, Shigeo

    1997-07-01

    This paper summarizes the current and anticipated use of the thermal-hydraulic and neutronic codes for the BWR transient and accident analyses in Japan. The codes may be categorized into the licensing codes and the best estimate codes for the BWR transient and accident analyses. Most of the licensing codes have been originally developed by General Electric. Some codes have been updated based on the technical knowledge obtained in the thermal hydraulic study in Japan, and according to the BWR design changes. The best estimates codes have been used to support the licensing calculations and to obtain the phenomenological understanding ofmore » the thermal hydraulic phenomena during a BWR transient or accident. The best estimate codes can be also applied to a design study for a next generation BWR to which the current licensing model may not be directly applied. In order to rationalize the margin included in the current BWR design and develop a next generation reactor with appropriate design margin, it will be required to improve the accuracy of the thermal-hydraulic and neutronic model. In addition, regarding the current best estimate codes, the improvement in the user interface and the numerics will be needed.« less

  9. Safety training priorities

    NASA Astrophysics Data System (ADS)

    Thompson, N. A.; Ruck, H. W.

    1984-04-01

    The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.

  10. Designing System Reforms: Using a Systems Approach to Translate Incident Analyses into Prevention Strategies.

    PubMed

    Goode, Natassia; Read, Gemma J M; van Mulken, Michelle R H; Clacy, Amanda; Salmon, Paul M

    2016-01-01

    Advocates of systems thinking approaches argue that accident prevention strategies should focus on reforming the system rather than on fixing the "broken components." However, little guidance exists on how organizations can translate incident data into prevention strategies that address the systemic causes of accidents. This article describes and evaluates a series of systems thinking prevention strategies that were designed in response to the analysis of multiple incidents. The study was undertaken in the led outdoor activity (LOA) sector in Australia, which delivers supervised or instructed outdoor activities such as canyoning, sea kayaking, rock climbing and camping. The design process involved workshops with practitioners, and focussed on incident data analyzed using Rasmussen's AcciMap technique. A series of reflection points based on the systemic causes of accidents was used to guide the design process, and the AcciMap technique was used to represent the prevention strategies and the relationships between them, leading to the creation of PreventiMaps. An evaluation of the PreventiMaps revealed that all of them incorporated the core principles of the systems thinking approach and many proposed prevention strategies for improving vertical integration across the LOA system. However, the majority failed to address the migration of work practices and the erosion of risk controls. Overall, the findings suggest that the design process was partially successful in helping practitioners to translate incident data into prevention strategies that addressed the systemic causes of accidents; refinement of the design process is required to focus practitioners more on designing monitoring and feedback mechanisms to support decisions at the higher levels of the system.

  11. Design and Implementation of a Fuzzy Accident Detector

    NASA Astrophysics Data System (ADS)

    Jafari, Shahram; Arabnejad, Mohammad; Rashidi Moakhar, Ali

    A fuzzy accident detector has been proposed in this paper. The implemented controller ensures a reliable margin for the speed of a car. This is done by carefully observing the skills of the driver in controlling the automobile during a critical condition. Since x- and y- accelerations of the automobile change sharply during an accident, such conditions can be detected. The system also updates the speed limits in different locations on the road.

  12. High Pressure Coolant Injection (HPCI) System Risk-Based Inspection Guide for Browns Ferry Nuclear Power Station

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wong, S.; DiBiasio, A.; Gunther, W.

    1993-09-01

    The High Pressure Coolant Injection (HPCI) system has been examined from a risk perspective. A System Risk-Based Inspection Guide (S-RIG) has been developed as an aid to HPCI system inspections at the Browns Ferry Nuclear Power Plant, Units 1, 2 and 3. The role of. the HPCI system in mitigating accidents is discussed in this S-RIG, along with insights on identified risk-based failure modes which could prevent proper operation of the system. The S-RIG provides a review of industry-wide operating experience, including plant-specific illustrative examples to augment the PRA and operational considerations in identifying a catalogue of basic PRA failuremore » modes for the HPCI system. It is designed to be used as a reference for routine inspections, self-initiated safety system functional inspections (SSFIs), and the evaluation of risk significance of component failures at the nuclear power plant.« less

  13. Loss of Coolant Accident (LOCA) / Emergency Core Coolant System (ECCS Evaluation of Risk-Informed Margins Management Strategies for a Representative Pressurized Water Reactor (PWR)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Szilard, Ronaldo Henriques

    A Risk Informed Safety Margin Characterization (RISMC) toolkit and methodology are proposed for investigating nuclear power plant core, fuels design and safety analysis, including postulated Loss-of-Coolant Accident (LOCA) analysis. This toolkit, under an integrated evaluation model framework, is name LOCA toolkit for the US (LOTUS). This demonstration includes coupled analysis of core design, fuel design, thermal hydraulics and systems analysis, using advanced risk analysis tools and methods to investigate a wide range of results.

  14. A Study of Transport Airplane Crash-Resistant Fuel Systems

    NASA Technical Reports Server (NTRS)

    Jones, Lisa (Technical Monitor); Robertson, S. H.; Johnson, N. B.; Hall, D. S.; Rimson, I. J.

    2002-01-01

    This report presents the results of a study, funded by the Federal Aviation Administration (FAA), of transport airplane crash-resistant fuel system (CRFS). The report covers the historical studies related to aircraft crash fires and fuel containment concepts undertaken by the FAA, NASA, and the U.S. Army, which ultimately led to the current state of the art in CRFS technology. It describes the basic research, testing, field investigations and production efforts which have led to the highly successful military CRFS, which has saved many lives and reduced costs of accidents. Current CRFS technology used in transport category airplanes is defined and compared to the available state-of-the-art technology. The report provides information to the FAA and other government organizations which can help them plan their efforts to improve the state of crash fire protection in the transport airplane fleet. The report provides guidance to designers looking for information about CRFS design problems, analysis tools to use for product improvement, and a summary of current and proposed regulations for transport category airplane fuel systems.

  15. A Radiation Homeland Security Workshop Presented to the City of Berkeley Fire Department

    NASA Astrophysics Data System (ADS)

    Matis, Howard

    2005-04-01

    A radiation incident in a community, ranging from a transportation accident to a dirty bomb, is expected to be rare, but still can occur. First responders to such an incident must be prepared. City of Berkeley officials met with members of the Lawrence Berkeley National Laboratory staff and agreed that the laboratory participants would create material and teach it to all of their fire fighting staff. To design such a course, nuclear physicists, biologists and health physicists merged some of their existing teaching material together with previous homeland security efforts to produce a course that lasted one full day. The material was designed to help alleviate the myths and fear of radiation experienced by many first responders. It included basic nuclear physics information, biological effects, and methods that health physicists use to detect and handle radiation. The curriculum included several hands on activities which involved working directly with the meters the Berkeley Fire Department possessed. In addition, I will discuss some observations from teaching this course material plus some unusual problems that we encountered, such as suddenly the whole class responding to a fire.

  16. Scaling and design analyses of a scaled-down, high-temperature test facility for experimental investigation of the initial stages of a VHTR air-ingress accident

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arcilesi, David J.; Ham, Tae Kyu; Kim, In Hun

    2015-07-01

    A critical event in the safety analysis of the very high-temperature gas-cooled reactor (VHTR) is an air-ingress accident. This accident is initiated, in its worst case scenario, by a double-ended guillotine break of the coaxial cross vessel, which leads to a rapid reactor vessel depressurization. In a VHTR, the reactor vessel is located within a reactor cavity that is filled with air during normal operating conditions. Following the vessel depressurization, the dominant mode of ingress of an air–helium mixture into the reactor vessel will either be molecular diffusion or density-driven stratified flow. The mode of ingress is hypothesized to dependmore » largely on the break conditions of the cross vessel. Since the time scales of these two ingress phenomena differ by orders of magnitude, it is imperative to understand under which conditions each of these mechanisms will dominate in the air ingress process. Computer models have been developed to analyze this type of accident scenario. There are, however, limited experimental data available to understand the phenomenology of the air-ingress accident and to validate these models. Therefore, there is a need to design and construct a scaled-down experimental test facility to simulate the air-ingress accident scenarios and to collect experimental data. The current paper focuses on the analyses performed for the design and operation of a 1/8th geometric scale (by height and diameter), high-temperature test facility. A geometric scaling analysis for the VHTR, a time scale analysis of the air-ingress phenomenon, a transient depressurization analysis of the reactor vessel, a hydraulic similarity analysis of the test facility, a heat transfer characterization of the hot plenum, a power scaling analysis for the reactor system, and a design analysis of the containment vessel are discussed.« less

  17. Severity of electrical accidents in the construction industry in Spain.

    PubMed

    Suárez-Cebador, Manuel; Rubio-Romero, Juan Carlos; López-Arquillos, Antonio

    2014-02-01

    This paper analyzes the severity of workplace accidents involving electricity in the Spanish construction sector comprising 2,776 accidents from 2003 to 2008. The investigation considered the impact of 13 variables, classified into 5 categories: Personal, Business, Temporal, Material, and Spatial. The findings showed that electrical accidents are almost five times more likely to have serious consequences than the average accident in the sector and it also showed how the variables of age, occupation, company size, length of service, preventive measures, time of day, days of absence, physical activity, material agent, type of injury, body part injured, accident location, and type of location are related to the severity of the electrical accidents under consideration. The present situation makes it clear that greater effort needs to be made in training, monitoring, and signage to guarantee a safe working environment in relation to electrical hazards. This research enables safety technicians, companies, and government officials to identify priorities and to design training strategies to minimize the serious consequences of electrical accidents for construction workers. Copyright © 2013 Elsevier Ltd and National Safety Council. All rights reserved.

  18. Medical management of radiation accidents: capabilities and deployment principles of the Bundeswehr Institute of Radiobiology.

    PubMed

    Dörr, Harald; Meineke, Viktor

    2012-10-01

    Radiation accidents are fortunately infrequent occurrences, but since their consequences can be very serious as in the Chernobyl and the Fukushima nuclear accidents, medical management of radiation accidents is of great importance. Besides several other tasks, medical management of radiation accidents is one of the key tasks of the Bundeswehr Institute of Radiobiology. Within a Task Force Unit for medical chemical, biological, radiological, and nuclear (CBRN) Defense, the institute provides designated personnel who will perform clinical investigations on the scene and will liaise with the institute, where different methods for biological dosimetry and dose reconstruction will be performed. The most important aspects of efficient medical management of radiation accidents are diagnosis of radiation-induced health damage, determination of the cause, dealing with contamination/incorporation, pathophysiological and therapeutic principles, preparatory planning, national and international cooperation and training. Military and non-military institutions have to work closely together when it comes to radiation accidents and since national resources are limited and could be exhausted, international networks can help to ensure medical treatment for radiation accident victims.

  19. Study on the Accident-causing of Foundation Pit Engineering

    NASA Astrophysics Data System (ADS)

    Shuicheng, Tian; Xinyue, Zhang; Pengfei, Yang; Longgang, Chen

    2018-05-01

    With the development of high-rise buildings and underground space, a large number of foundation pit projects have occurred. Frequent accidents of it cause great losses to the society, how to reduce the frequency of pit accidents has become one of the most urgent problems to be solved. Therefore, analysing the influencing factors of foundation pit engineering accidents and studying the causes of foundation pit accidents, which of great significance for improving the safety management level of foundation pit engineering and reducing the incidence of foundation pit accidents. Firstly, based on literature review and questionnaires, this paper selected construction management, survey, design, construction, supervision and monitoring as research factors, we used the AHP method and the Dematel method to analyze the weights of various influencing factors to screen indicators to determine the ultimate system of accidents caused by foundation pit accidents; Secondly, SPSS 21.0 software was used to test the reliability and validity of the recovered questionnaire data. AMOS 7.0 software was used to fit, evaluate, and explain the set model; Finally, this paper analysed the influencing factors of foundation pit engineering accidents, corresponding management countermeasures and suggestions were put forward.

  20. Analysis of defects of overhead facade systems and other light thin-walled structures

    NASA Astrophysics Data System (ADS)

    Endzhievskiy, L.; Frolovskaia, A.; Petrova, Y.

    2017-04-01

    This paper analyzes the defects and the causes of contemporary design solutions with an example of overhead facade systems with ventilated air gaps and light steel thin-walled structures on the basis of field experiments. The analysis is performed at all stages of work: design, manufacture, including quality, construction, and operation. Practical examples are given. The main causes of accidents and the accident rate prediction are looked upon and discussed.

  1. Structural testing of the Los Alamos National Laboratory Heat Source/Radioisotopic Thermoelectric Generator shipping container

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bronowski, D.R.; Madsen, M.M.

    The Heat Source/Radioisotopic Thermoelectric Generator shipping container is a Type B packaging design currently under development by Los Alamos National Laboratory. Type B packaging for transporting radioactive material is required to maintain containment and shielding after being exposed to the normal and hypothetical accident environments defined in Title 10 Code of Federal Regulations Part 71. A combination of testing and analysis is used to verify the adequacy of this package design. This report documents the test program portion of the design verification, using several prototype packages. Four types of testing were performed: 30-foot hypothetical accident condition drop tests in threemore » orientations, 40-inch hypothetical accident condition puncture tests in five orientations, a 21 psi external overpressure test, and a normal conditions of transport test consisting of a water spray and a 4 foot drop test. 18 refs., 104 figs., 13 tabs.« less

  2. Conceptual design study of Fusion Experimental Reactor (FY86 FER): Safety

    NASA Astrophysics Data System (ADS)

    Seki, Yasushi; Iida, Hiromasa; Honda, Tsutomu

    1987-08-01

    This report describes the study on safety for FER (Fusion Experimental Reactor) which has been designed as a next step machine to the JT-60. Though the final purpose of this study is to have an image of design base accident, maximum credible accident and to assess their risk or probability, etc., as FER plant system, the emphasis of this years study is placed on fuel-gas circulation system where the tritium inventory is maximum. The report consists of two chapters. The first chapter summarizes the FER system and describes FMEA (Failure Mode and Effect Analysis) and related accident progression sequence for FER plant system as a whole. The second chapter of this report is focused on fuel-gas circulation system including purification, isotope separation and storage. Probability of risk is assessed by the probabilistic risk analysis (PRA) procedure based on FMEA, ETA and FTA.

  3. Westinghouse Small Modular Reactor passive safety system response to postulated events

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, M. C.; Wright, R. F.

    2012-07-01

    The Westinghouse Small Modular Reactor (SMR) is an 800 MWt (>225 MWe) integral pressurized water reactor. This paper is part of a series of four describing the design and safety features of the Westinghouse SMR. This paper focuses in particular upon the passive safety features and the safety system response of the Westinghouse SMR. The Westinghouse SMR design incorporates many features to minimize the effects of, and in some cases eliminates the possibility of postulated accidents. The small size of the reactor and the low power density limits the potential consequences of an accident relative to a large plant. Themore » integral design eliminates large loop piping, which significantly reduces the flow area of postulated loss of coolant accidents (LOCAs). The Westinghouse SMR containment is a high-pressure, compact design that normally operates at a partial vacuum. This facilitates heat removal from the containment during LOCA events. The containment is submerged in water which also aides the heat removal and provides an additional radionuclide filter. The Westinghouse SMR safety system design is passive, is based largely on the passive safety systems used in the AP1000{sup R} reactor, and provides mitigation of all design basis accidents without the need for AC electrical power for a period of seven days. Frequent faults, such as reactivity insertion events and loss of power events, are protected by first shutting down the nuclear reaction by inserting control rods, then providing cold, borated water through a passive, buoyancy-driven flow. Decay heat removal is provided using a layered approach that includes the passive removal of heat by the steam drum and independent passive heat removal system that transfers heat from the primary system to the environment. Less frequent faults such as loss of coolant accidents are mitigated by passive injection of a large quantity of water that is readily available inside containment. An automatic depressurization system is used to reduce the reactor pressure in a controlled manner to facilitate the passive injection. Long-term decay heat removal is accomplished using the passive heat removal systems augmented by heat transfer through the containment vessel to the environment. The passive injection systems are designed so that the fuel remains covered and effectively cooled throughout the event. Like during the frequent faults, the passive systems provide effective cooling without the need for ac power for seven days following the accident. Connections are available to add additional water to indefinitely cool the plant. The response of the safety systems of the Westinghouse SMR to various initiating faults has been examined. Among them, two accidents; an extended station blackout event, and a LOCA event have been evaluated to demonstrate how the plant will remain safe in the unlikely event that either should occur. (authors)« less

  4. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Knudsen, J.K.; Smith, C.L.

    The steps involved to incorporate parameter uncertainty into the Nuclear Regulatory Commission (NRC) accident sequence precursor (ASP) models is covered in this paper. Three different uncertainty distributions (i.e., lognormal, beta, gamma) were evaluated to Determine the most appropriate distribution. From the evaluation, it was Determined that the lognormal distribution will be used for the ASP models uncertainty parameters. Selection of the uncertainty parameters for the basic events is also discussed. This paper covers the process of determining uncertainty parameters for the supercomponent basic events (i.e., basic events that are comprised of more than one component which can have more thanmore » one failure mode) that are utilized in the ASP models. Once this is completed, the ASP model is ready to be utilized to propagate parameter uncertainty for event assessments.« less

  5. Design of a smart, survivable sensor system for rapid transit applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hogan, J.R.; Mitchell, J.L.

    1994-08-01

    An application of smart sensor technology developed by Sandia National Laboratories has been proposed for real-time monitoring and tracking in the transportation industry. Its primary purpose is to reduce operating costs by improving preventative maintenance scheduling, reducing the number, severity and consequence of accidents and by reducing losses due to theft. The concept uses a strap-on sensor package, the Green Box, that can be attached to any vehicle. The Green Box is designed as a valued-added component, integrated into existing transportation industry systems and standards. The device, designed to provide advanced warning of component failures, would be capable of survivingmore » most typical accidents. In an accident, the system would send a distress signal notifying authorities of the location and condition of the cargo; permitting them to respond in the most effective manner. In addition, the Green Box is adaptable for use as a notification/locator system to enhance the security of operators and passengers for various modes of public transportation. The modular architecture which facilitates system integration in a number of different applications is discussed. A test plan for evaluating performance in both normal and abnormal operating and accident conditions is described.« less

  6. Risk-based design of process plants with regard to domino effects and land use planning.

    PubMed

    Khakzad, Nima; Reniers, Genserik

    2015-12-15

    Land use planning (LUP) as an effective and crucial safety measure has widely been employed by safety experts and decision makers to mitigate off-site risks posed by major accidents. Accordingly, the concept of LUP in chemical plants has traditionally been considered from two perspectives: (i) land developments around existing chemical plants considering potential off-site risks posed by major accidents and (ii) development of existing chemical plants considering nearby land developments and the level of additional off-site risks the land developments would be exposed to. However, the attempts made to design chemical plants with regard to LUP requirements have been few, most of which have neglected the role of domino effects in risk analysis of major accidents. To overcome the limitations of previous work, first, we developed a Bayesian network methodology to calculate both on-site and off-site risks of major accidents while taking domino effects into account. Second, we combined the results of risk analysis with Analytic Hierarchical Process to design an optimal layout for which the levels of on-site and off-site risks would be minimum. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. A classification on human factor accident/incident of China civil aviation in recent twelve years.

    PubMed

    Luo, Xiao-li

    2004-10-01

    To study human factor accident/incident occurred during 1990-2001 using new classification standard. The human factor accident/incident classification standard is developed on the basis of Reason's Model, combining with CAAC's traditional classifying method, and applied to the classified statistical analysis for 361 flying incidents and 35 flight accidents of China civil aviation, which is induced by human factors and occurred from 1990 to 2001. 1) the incident percentage of taxi and cruise is higher than that of takeoff, climb and descent. 2) The dominating type of flight incidents is diverging of runway, overrunning, near-miss, tail/wingtip/engine strike and ground obstacle impacting. 3) The top three accidents are out of control caused by crew, mountain collision and over runway. 4) Crew's basic operating skill is lower than what we imagined, the mostly representation is poor correcting ability when flight error happened. 5) Crew errors can be represented by incorrect control, regulation and procedure violation, disorientation and diverging percentage of correct flight level. The poor CRM skill is the dominant factor impacting China civil aviation safety, this result has a coincidence with previous study, but there is much difference and distinct characteristic in top incident phase, the type of crew error and behavior performance compared with that of advanced countries. We should strengthen CRM training for all of pilots aiming at the Chinese pilot behavior characteristic in order to improve the safety level of China civil aviation.

  8. System analysis with improved thermo-mechanical fuel rod models for modeling current and advanced LWR materials in accident scenarios

    NASA Astrophysics Data System (ADS)

    Porter, Ian Edward

    A nuclear reactor systems code has the ability to model the system response in an accident scenario based on known initial conditions at the onset of the transient. However, there has been a tendency for these codes to lack the detailed thermo-mechanical fuel rod response models needed for accurate prediction of fuel rod failure. This proposed work will couple today's most widely used steady-state (FRAPCON) and transient (FRAPTRAN) fuel rod models with a systems code TRACE for best-estimate modeling of system response in accident scenarios such as a loss of coolant accident (LOCA). In doing so, code modifications will be made to model gamma heating in LWRs during steady-state and accident conditions and to improve fuel rod thermal/mechanical analysis by allowing axial nodalization of burnup-dependent phenomena such as swelling, cladding creep and oxidation. With the ability to model both burnup-dependent parameters and transient fuel rod response, a fuel dispersal study will be conducted using a hypothetical accident scenario under both PWR and BWR conditions to determine the amount of fuel dispersed under varying conditions. Due to the fuel fragmentation size and internal rod pressure both being dependent on burnup, this analysis will be conducted at beginning, middle and end of cycle to examine the effects that cycle time can play on fuel rod failure and dispersal. Current fuel rod and system codes used by the Nuclear Regulatory Commission (NRC) are compilations of legacy codes with only commonly used light water reactor materials, Uranium Dioxide (UO2), Mixed Oxide (U/PuO 2) and zirconium alloys. However, the events at Fukushima Daiichi and Three Mile Island accident have shown the need for exploration into advanced materials possessing improved accident tolerance. This work looks to further modify the NRC codes to include silicon carbide (SiC), an advanced cladding material proposed by current DOE funded research on accident tolerant fuels (ATF). Several additional fuels will also be analyzed, including uranium nitride (UN), uranium carbide (UC) and uranium silicide (U3Si2). Focusing on the system response in an accident scenario, an emphasis is placed on the fracture mechanics of the ceramic cladding by design the fuel rods to eliminate pellet cladding mechanical interaction (PCMI). The time to failure and how much of the fuel in the reactor fails with an advanced fuel design will be analyzed and compared to the current UO2/Zircaloy design using a full scale reactor model.

  9. Rotorcraft Drivetrain Life Safety and Reliability (Cycle de Vie, Securite et Fiabilite des Chaines Dynamiques des Avions a Voilure Tournante)

    DTIC Science & Technology

    1990-06-01

    design and component technologies are reviewed against a background of accident data analysis , resulting in grounds for confidence in higher safety levels...constructors or operators taking voluntary actions based on accident investigations and their own data . Analysis of the CAA Summaty data (Appendix 3...of engines. In the accident data analysis in Appendix 3, insufficient data was available to determine whether rotor configuration or associated

  10. PC Rider. A Training Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-36.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This booklet provides information on safe motorcycle operation and accident prevention. Its special focus is on Peace Corps volunteers who operate motorcycles in West Africa. A discussion of how a motorcyclist can minimize risks focuses on the "invisible motorcycle" and basic safety precautions. A section with riding tips is divided…

  11. Scuba diving accidents.

    PubMed

    Dembert, M L

    1977-08-01

    The principal scuba diving medical problems of barotrauma, air embolism and decompression sickness have as their pathophysiologic basis the Ideal Gas Law and Boyle's Law. Hyperbaric chamber recompression therapy is the only definitive treatment of air embolism and decompression sickness. However, with a basic knowledge of diving medicine, the family physician can provide effective supportive care to the patient prior to initiation of hyperbaric therapy.

  12. Enhancing U.S. Army Aircrew Coordination Training

    DTIC Science & Technology

    2003-05-01

    while decreasing the errors that lead to accidents. ACT and Crew/Cockpit Resource Management ( CRM ) programs were instituted in the 1980’s, first in...Both courses contain a fully integrated Data Management System that tracks student demographics, provides graphic feedback displays during evaluation...2 1 Appendix A Objectives, Basic Qualities, and Risk Management ...................... A-1 Appendix B Performance Evaluation Checklist

  13. Structural Analysis for the American Airlines Flight 587 Accident Investigation: Global Analysis

    NASA Technical Reports Server (NTRS)

    Young, Richard D.; Lovejoy, Andrew E.; Hilburger, Mark W.; Moore, David F.

    2005-01-01

    NASA Langley Research Center (LaRC) supported the National Transportation Safety Board (NTSB) in the American Airlines Flight 587 accident investigation due to LaRC's expertise in high-fidelity structural analysis and testing of composite structures and materials. A Global Analysis Team from LaRC reviewed the manufacturer s design and certification procedures, developed finite element models and conducted structural analyses, and participated jointly with the NTSB and Airbus in subcomponent tests conducted at Airbus in Hamburg, Germany. The Global Analysis Team identified no significant or obvious deficiencies in the Airbus certification and design methods. Analysis results from the LaRC team indicated that the most-likely failure scenario was failure initiation at the right rear main attachment fitting (lug), followed by an unstable progression of failure of all fin-to-fuselage attachments and separation of the VTP from the aircraft. Additionally, analysis results indicated that failure initiates at the final observed maximum fin loading condition in the accident, when the VTP was subjected to loads that were at minimum 1.92 times the design limit load condition for certification. For certification, the VTP is only required to support loads of 1.5 times design limit load without catastrophic failure. The maximum loading during the accident was shown to significantly exceed the certification requirement. Thus, the structure appeared to perform in a manner consistent with its design and certification, and failure is attributed to VTP loads greater than expected.

  14. Thermal-hydraulic analysis of N Reactor graphite and shield cooling system performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Low, J.O.; Schmitt, B.E.

    1988-02-01

    A series of bounding (worst-case) calculations were performed using a detailed hydrodynamic RELAP5 model of the N Reactor graphite and shield cooling system (GSCS). These calculations were specifically aimed to answer issues raised by the Westinghouse Independent Safety Review (WISR) committee. These questions address the operability of the GSCS during a worst-case degraded-core accident that requires the GDCS to mitigate the consequences of the accident. An accident scenario previously developed was designed as the hydrogen-mitigation design-basis accident (HMDBA). Previous HMDBA heat transfer analysis,, using the TRUMP-BD code, was used to define the thermal boundary conditions that the GSDS may bemore » exposed to. These TRUMP/HMDBA analysis results were used to define the bounding operating conditions of the GSCS during the course of an HMDBA transient. Nominal and degraded GSCS scenarios were investigated using RELAP5 within or at the bounds of the HMDBA transient. 10 refs., 42 figs., 10 tabs.« less

  15. Deep Borehole Emplacement Mode Hazard Analysis Revision 0

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sevougian, S. David

    This letter report outlines a methodology and provides resource information for the Deep Borehole Emplacement Mode Hazard Analysis (DBEMHA). The main purpose is identify the accident hazards and accident event sequences associated with the two emplacement mode options (wireline or drillstring), to outline a methodology for computing accident probabilities and frequencies, and to point to available databases on the nature and frequency of accidents typically associated with standard borehole drilling and nuclear handling operations. Risk mitigation and prevention measures, which have been incorporated into the two emplacement designs (see Cochran and Hardin 2015), are also discussed. A key intent ofmore » this report is to provide background information to brief subject matter experts involved in the Emplacement Mode Design Study. [Note: Revision 0 of this report is concentrated more on the wireline emplacement mode. It is expected that Revision 1 will contain further development of the preliminary fault and event trees for the drill string emplacement mode.]« less

  16. Orbiter Payload Bay Bucket Hoist Mishap...An Accident We Should Never Forget

    NASA Technical Reports Server (NTRS)

    Lytle, Bradford P.

    2009-01-01

    This slide presentation reviews the accident that occurred in 1985 when a bay bucket hoist fell from its stowed position. This accident damaged the orbiter, injured a technician, and delayed the launch. The accident was investigated, and the cause of the accident was determined to be the practice of two-blocking. Two-blocking is the result of hoisting beyond the intended safe upper limit of hook travel to the point of solid contact between the load block and the upper block or hoist/trolley structure. The usual result is immediate failure of the wire rope, due to the ropes being cut by the grooves of the drum or sheaves. The design of the hoist, the inspection, and the operator training were all in part responsible for this failure.

  17. Analysis of accidents with organic material in health workers.

    PubMed

    Vieira, Mariana; Padilha, Maria Itayra; Pinheiro, Regina Dal Castel

    2011-01-01

    This retrospective and descriptive study with a quantitative design aimed to evaluate occupational accidents with exposure to biological material, as well as the profile of workers, based on reporting forms sent to the Regional Reference Center of Occupational Health in Florianópolis/SC. Data collection was carried out through a survey of 118 reporting forms in 2007. Data were analyzed electronically. The occurrence of accidents was predominantly among nursing technicians, women and the mean age was 34.5 years. 73% of accidents involved percutaneous exposure, 78% had blood and fluid with blood, 44.91% resulted from invasive procedures. It was concluded that strategies to prevent the occurrence of accidents with biological material should include joint activities between workers and service management and should be directed at improving work conditions and organization.

  18. Designing System Reforms: Using a Systems Approach to Translate Incident Analyses into Prevention Strategies

    PubMed Central

    Goode, Natassia; Read, Gemma J. M.; van Mulken, Michelle R. H.; Clacy, Amanda; Salmon, Paul M.

    2016-01-01

    Advocates of systems thinking approaches argue that accident prevention strategies should focus on reforming the system rather than on fixing the “broken components.” However, little guidance exists on how organizations can translate incident data into prevention strategies that address the systemic causes of accidents. This article describes and evaluates a series of systems thinking prevention strategies that were designed in response to the analysis of multiple incidents. The study was undertaken in the led outdoor activity (LOA) sector in Australia, which delivers supervised or instructed outdoor activities such as canyoning, sea kayaking, rock climbing and camping. The design process involved workshops with practitioners, and focussed on incident data analyzed using Rasmussen's AcciMap technique. A series of reflection points based on the systemic causes of accidents was used to guide the design process, and the AcciMap technique was used to represent the prevention strategies and the relationships between them, leading to the creation of PreventiMaps. An evaluation of the PreventiMaps revealed that all of them incorporated the core principles of the systems thinking approach and many proposed prevention strategies for improving vertical integration across the LOA system. However, the majority failed to address the migration of work practices and the erosion of risk controls. Overall, the findings suggest that the design process was partially successful in helping practitioners to translate incident data into prevention strategies that addressed the systemic causes of accidents; refinement of the design process is required to focus practitioners more on designing monitoring and feedback mechanisms to support decisions at the higher levels of the system. PMID:28066296

  19. Exploring Challenges in Developing a Smart and Effective Assistive System for Improving the Experience of the Elderly Drivers

    NASA Astrophysics Data System (ADS)

    Jung, Sebin; Meng, Hong-Ying; Qin, Sheng-Feng

    2017-09-01

    As the overall population ages, driving-related accidents and injuries, associated with elderly drivers, have risen. Existing research about elderly drivers mainly focuses on factual data collection and analysis, indicating the elderly's growing fatal accident rates and their different behaviours compared to younger drivers. However, few research has focused on design-led practical solutions to mitigate the elderly's growing fatal accidents, by considering their usability and body conditions, afflicting the elderly, such as decreased vision, hearing, and reaction times. In this paper, first, current worldwide situations on growing fatal accident rates for elderly drivers is reviewed and the key impact factors are identified and discussed with regarding to usability and design trend in the automotive technology for elderly. Second, existing smart vehicle technology-based solutions to promote safe driving are explored and their pros and cons are discussed and analysed. Most of solutions are not created by people with driving difficulties, which are caused by health problems most commonly afflicting the elderly. Thirdly, diverse design-led research activities are taken, such as a survey, observation, and interviews to gain new understanding of what kinds of driving problems elderly drivers have and demonstrate how new system concepts could be developed for the elderly's benefits. Finally, it is found that the elderly's low vision and late reaction are main factors causing their driving difficulties. Based on this finding, usable vehicle system design ideas have been proposed, by utilising facial expression sensing technology as a solution. The proposed solutions would ensure reducing both the elderly's driving problems and high fatal accident rates and provide a more enjoyable driving environment for the elderly population.

  20. Advanced Instrumentation for Transient Reactor Testing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Corradini, Michael L.; Anderson, Mark; Imel, George

    Transient testing involves placing fuel or material into the core of specialized materials test reactors that are capable of simulating a range of design basis accidents, including reactivity insertion accidents, that require the reactor produce short bursts of intense highpower neutron flux and gamma radiation. Testing fuel behavior in a prototypic neutron environment under high-power, accident-simulation conditions is a key step in licensing nuclear fuels for use in existing and future nuclear power plants. Transient testing of nuclear fuels is needed to develop and prove the safety basis for advanced reactors and fuels. In addition, modern fuel development and designmore » increasingly relies on modeling and simulation efforts that must be informed and validated using specially designed material performance separate effects studies. These studies will require experimental facilities that are able to support variable scale, highly instrumented tests providing data that have appropriate spatial and temporal resolution. Finally, there are efforts now underway to develop advanced light water reactor (LWR) fuels with enhanced performance and accident tolerance. These advanced reactor designs will also require new fuel types. These new fuels need to be tested in a controlled environment in order to learn how they respond to accident conditions. For these applications, transient reactor testing is needed to help design fuels with improved performance. In order to maximize the value of transient testing, there is a need for in-situ transient realtime imaging technology (e.g., the neutron detection and imaging system like the hodoscope) to see fuel motion during rapid transient excursions with a higher degree of spatial and temporal resolution and accuracy. There also exists a need for new small, compact local sensors and instrumentation that are capable of collecting data during transients (e.g., local displacements, temperatures, thermal conductivity, neutron flux, etc.).« less

  1. Side differences in cerebrovascular accidents after cardiac surgery: a statistical analysis of neurologic symptoms and possible implications for anatomic mechanisms of aortic particle embolization.

    PubMed

    Boivie, Patrik; Edström, Cecilia; Engström, Karl Gunnar

    2005-03-01

    Aortic manipulation and particle embolization have been identified to cause cerebrovascular accidents in cardiac surgery. Recent data suggest that left-hemispheric cerebrovascular accident (right-sided symptoms) is more common, and this has been interpreted as being caused by aortic cannula stream jets. Our aim was to evaluate symptoms of cerebrovascular accident and side differences from a retrospective statistical analysis. During a 2-year period, 2641 consecutive cardiac surgery cases were analyzed. Patients positive for cerebrovascular accident were extracted from a database designed to monitor clinical symptoms. A protocol was used to confirm symptom data with the correct diagnosis in patient records. Patients were subdivided into 3 groups: control, immediate cerebrovascular accident, and delayed cerebrovascular accident. Among pooled patients, immediate and delayed cerebrovascular accidents were 3.0% and 0.9%, respectively. The expected predisposing factors behind immediate cerebrovascular accidents were significant, although the type of operation affected this search. Aortic quality was a strong predictor ( P < .001). The rate of delayed cerebrovascular accident was unaffected by surgery group. Left-sided symptoms of immediate cerebrovascular accident were approximately twice as frequent ( P = .016) as on the contralateral side. This phenomenon was observed for pooled patients and for isolated coronary bypass procedures (n = 1882; P = .025). Immediate cerebrovascular accident and aortic calcifications are linked. The predominance of left-sided symptoms may suggest that aortic manipulation and anatomic mechanisms in the aortic arch are more likely to cause cerebrovascular accidents than effects from cannula stream jets.

  2. On a Clear Day, You Can See ICS: The Dying Art of Incident Command and the Normal Accident of NIMS - A Policy Analysis

    DTIC Science & Technology

    2013-03-01

    response in an effort to determine “What can be done better next time?” and “How do we prevent this from happening again?” One basic expectation that...effort to determine “What can be done better next time?” and “How do we prevent this from happening again?” One basic expectation that citizens have of...to determine “What can be done better next time?” and “How do we prevent this from happening again?” After the tragic events of September, 11, 2001

  3. The effect of road and environmental characteristics on pedestrian hit-and-run accidents in Ghana.

    PubMed

    Aidoo, Eric Nimako; Amoh-Gyimah, Richard; Ackaah, Williams

    2013-04-01

    The number of pedestrians who have died as a result of being hit by vehicles has increased in recent years, in addition to vehicle passenger deaths. Many pedestrians who were involved in road traffic accident died as a result of the driver leaving the pedestrian who was struck unattended at the scene of the accident. This paper seeks to determine the effect of road and environmental characteristics on pedestrian hit-and-run accidents in Ghana. Using pedestrian accident data extracted from the National Road Traffic Accident Database at the Building and Road Research Institute (BRRI) of the Council for Scientific and Industrial Research (CSIR), Ghana, a binary logit model was employed in the analysis. The results from the estimated model indicate that fatal accidents, unclear weather, nighttime conditions, and straight and flat road sections without medians and junctions significantly increase the likelihood that the vehicle driver will leave the scene after hitting a pedestrian. Thus, integrating median separation and speed humps into road design and construction and installing street lights will help to curb the problem of pedestrian hit-and-run accidents in Ghana. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Fatigue failure of metal components as a factor in civil aircraft accidents

    NASA Technical Reports Server (NTRS)

    Holshouser, W. L.; Mayner, R. D.

    1972-01-01

    A review of records maintained by the National Transportation Safety Board showed that 16,054 civil aviation accidents occurred in the United States during the 3-year period ending December 31, 1969. Material failure was an important factor in the cause of 942 of these accidents. Fatigue was identified as the mode of the material failures associated with the cause of 155 accidents and in many other accidents the records indicated that fatigue failures might have been involved. There were 27 fatal accidents and 157 fatalities in accidents in which fatigue failures of metal components were definitely identified. Fatigue failures associated with accidents occurred most frequently in landing-gear components, followed in order by powerplant, propeller, and structural components in fixed-wing aircraft and tail-rotor and main-rotor components in rotorcraft. In a study of 230 laboratory reports on failed components associated with the cause of accidents, fatigue was identified as the mode of failure in more than 60 percent of the failed components. The most frequently identified cause of fatigue, as well as most other types of material failures, was improper maintenance (including inadequate inspection). Fabrication defects, design deficiencies, defective material, and abnormal service damage also caused many fatigue failures. Four case histories of major accidents are included in the paper as illustrations of some of the factors invovled in fatigue failures of aircraft components.

  5. Accident Report: Pupils -- Employees, School Jurisdiction, 1972-1973.

    ERIC Educational Resources Information Center

    O'Hara, James M., Comp.; Conklin, Robert L., Comp.

    This report is intended to provide principals, department heads, teachers, and parents with specific information designed to assist them in isolating unsafe conditions, activities, and behavioral problems. The document is divided into three parts: (1) a pupil section, with tables showing where accidents occurred, what parts of the body were…

  6. Speed Variance and Its Influence on Accidents.

    ERIC Educational Resources Information Center

    Garber, Nicholas J.; Gadirau, Ravi

    A study was conducted to investigate the traffic engineering factors that influence speed variance and to determine to what extent speed variance affects accident rates. Detailed analyses were carried out to relate speed variance with posted speed limit, design speeds, and other traffic variables. The major factor identified was the difference…

  7. How perceptions of experience-based analysis influence explanations of work accidents.

    PubMed

    Mbaye, Safiétou; Kouabenan, Dongo Rémi

    2013-12-01

    This article looks into how perceptions of experience-based analysis (EBA) influence causal explanations of accidents given by managers and workers in the chemical industry (n=409) and in the nuclear industry (n=222). The approach is based on the model of naive explanations of accidents (Kouabenan, 1999, 2006, 2009), which recommends taking into account explanations of accidents spontaneously given by individuals, including laypersons, not only to better understand why accidents occur but also to design and implement the most appropriate prevention measures. The study reported here describes the impact of perceptions about EBA (perceived effectiveness, personal commitment, and the feeling of being involved in EBA practices) on managers' and workers' explanations of accidents likely to occur at the workplace. The results indicated that both managers and workers made more internal explanations than external ones when they perceived EBA positively. Moreover, the more the participants felt involved in EBA, were committed to it, and judged it effective, the more they explained accidents in terms of factors internal to the workers. Recommendations are proposed for reducing defensive reactions, increasing personal commitment to EBA, and improving EBA effectiveness. © 2013.

  8. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burger, J.R.

    Loss control, both as a phrase and a concept, isn't used very widely in the U.S. coal industry although a U.S. manufacturer has cut accidents 71% and increased productivity 40% using the system. Safety is a part of the loss control concept, but it goes beyond traditional accident and illness prevention to become management control of anything that can result in loss or property damage. This includes what ILCI calls incidents, that is, ''any undesired or unwanted event that could (or does) degrade the efficiency of the business operation.'' These incidents could be accidents, quality or production problems, or evenmore » security breaches (such as thefts). So while safety is always a basic element-loss control also includes absenteeism control, security, fire prevention and industrial hygiene, since they're all interrelated disciplines for reducing loss. A baseline evaluation is followed by recommendations and guidance in self-sustaining corrective measures. This program would cost about $3,500 the first year. Possibly this approach is not used in the U.S. because miners feel that with all the legislation and regulation of the industry no further program is needed.« less

  9. Guidelines for the use of protected/permissive left-turn phasing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Agent, K.R.

    1987-07-01

    Turning left across opposing traffic at a signalized intersection could result in a traffic accident, as well as create motorist delay. A solution to the left-turn problem may be the addition of a left-turn phase when certain guidelines are met. After a decision has been made to add a left-turn phase, one of two basic alternative phasing methods is . In a previous research study, the results of replacing protected-only (exclusive) with protected/permissive (permissive) phasing at four trial intersections were studied. The permissive phasing provided a substantial reduction in delay and was popular with local drivers. However, several left-turn relatedmore » accidents occurred at those locations. Since those initial trial installations, permissive phasing has been used at several intersections across the state. This created a larger data base that could be used to determine when permissive phasing could be used without causing an accident problem. The objective of this study was to develop guidelines to aid traffic engineers in deciding whether permissive left-turn phasing is appropriate for use at a given location.« less

  10. Characterization of thermal-hydraulic and ignition phenomena in prototypic, full-length boiling water reactor spent fuel pool assemblies after a complete loss-of-coolant accident.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lindgren, Eric Richard; Durbin, Samuel G

    2007-04-01

    The objective of this project was to provide basic thermal-hydraulic data associated with a SFP complete loss-of-coolant accident. The accident conditions of interest for the SFP were simulated in a full-scale prototypic fashion (electrically-heated, prototypic assemblies in a prototypic SFP rack) so that the experimental results closely represent actual fuel assembly responses. A major impetus for this work was to facilitate code validation (primarily MELCOR) and reduce questions associated with interpretation of the experimental results. It was necessary to simulate a cluster of assemblies to represent a higher decay (younger) assembly surrounded by older, lower-power assemblies. Specifically, this program providedmore » data and analysis confirming: (1) MELCOR modeling of inter-assembly radiant heat transfer, (2) flow resistance modeling and the natural convective flow induced in a fuel assembly as it heats up in air, (3) the potential for and nature of thermal transient (i.e., Zircaloy fire) propagation, and (4) mitigation strategies concerning fuel assembly management.« less

  11. Designing the accident and emergency system: lessons from manufacturing.

    PubMed

    Walley, P

    2003-03-01

    To review the literature on manufacturing process design and demonstrate applicability in health care. Literature review and application of theory using two years activity data from two healthcare communities and extensive observation of activities over a six week period by seven researchers. It was possible to identify patient flows that could be used to design treatment processes around the needs of the patient. Some queues are built into existing treatment processes and can be removed by better process design. Capacity imbalance, not capacity shortage, causes some unnecessary waiting in accident and emergency departments. Clinicians would find that modern manufacturing theories produce more acceptable designs of systems. In particular, good quality is seen as a necessary pre-requisite of fast, efficient services.

  12. Severe Accident Scoping Simulations of Accident Tolerant Fuel Concepts for BWRs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Robb, Kevin R.

    2015-08-01

    Accident-tolerant fuels (ATFs) are fuels and/or cladding that, in comparison with the standard uranium dioxide Zircaloy system, can tolerate loss of active cooling in the core for a considerably longer time period while maintaining or improving the fuel performance during normal operations [1]. It is important to note that the currently used uranium dioxide Zircaloy fuel system tolerates design basis accidents (and anticipated operational occurrences and normal operation) as prescribed by the US Nuclear Regulatory Commission. Previously, preliminary simulations of the plant response have been performed under a range of accident scenarios using various ATF cladding concepts and fully ceramicmore » microencapsulated fuel. Design basis loss of coolant accidents (LOCAs) and station blackout (SBO) severe accidents were analyzed at Oak Ridge National Laboratory (ORNL) for boiling water reactors (BWRs) [2]. Researchers have investigated the effects of thermal conductivity on design basis accidents [3], investigated silicon carbide (SiC) cladding [4], as well as the effects of ATF concepts on the late stage accident progression [5]. These preliminary analyses were performed to provide initial insight into the possible improvements that ATF concepts could provide and to identify issues with respect to modeling ATF concepts. More recently, preliminary analyses for a range of ATF concepts have been evaluated internationally for LOCA and severe accident scenarios for the Chinese CPR1000 [6] and the South Korean OPR-1000 [7] pressurized water reactors (PWRs). In addition to these scoping studies, a common methodology and set of performance metrics were developed to compare and support prioritizing ATF concepts [8]. A proposed ATF concept is based on iron-chromium-aluminum alloys (FeCrAl) [9]. With respect to enhancing accident tolerance, FeCrAl alloys have substantially slower oxidation kinetics compared to the zirconium alloys typically employed. During a severe accident, FeCrAl would tend to generate heat and hydrogen from oxidation at a slower rate compared to the zirconium-based alloys in use today. The previous study, [2], of the FeCrAl ATF concept during station blackout (SBO) severe accident scenarios in BWRs was based on simulating short term SBO (STSBO), long term SBO (LTSBO), and modified SBO scenarios occurring in a BWR-4 reactor with MARK-I containment. The analysis indicated that FeCrAl had the potential to delay the onset of fuel failure by a few hours depending on the scenario, and it could delay lower head failure by several hours. The analysis demonstrated reduced in-vessel hydrogen production. However, the work was preliminary and was based on limited knowledge of material properties for FeCrAl. Limitations of the MELCOR code were identified for direct use in modeling ATF concepts. This effort used an older version of MELCOR (1.8.5). Since these analyses, the BWR model has been updated for use in MELCOR 1.8.6 [10], and more representative material properties for FeCrAl have been modeled. Sections 2 4 present updated analyses for the FeCrAl ATF concept response during severe accidents in a BWR. The purpose of the study is to estimate the potential gains afforded by the FeCrAl ATF concept during BWR SBO scenarios.« less

  13. Key factors contributing to accident severity rate in construction industry in Iran: a regression modelling approach.

    PubMed

    Soltanzadeh, Ahmad; Mohammadfam, Iraj; Moghimbeigi, Abbas; Ghiasvand, Reza

    2016-03-01

    Construction industry involves the highest risk of occupational accidents and bodily injuries, which range from mild to very severe. The aim of this cross-sectional study was to identify the factors associated with accident severity rate (ASR) in the largest Iranian construction companies based on data about 500 occupational accidents recorded from 2009 to 2013. We also gathered data on safety and health risk management and training systems. Data were analysed using Pearson's chi-squared coefficient and multiple regression analysis. Median ASR (and the interquartile range) was 107.50 (57.24- 381.25). Fourteen of the 24 studied factors stood out as most affecting construction accident severity (p<0.05). These findings can be applied in the design and implementation of a comprehensive safety and health risk management system to reduce ASR.

  14. Containment penetration elastomer seal leak rate tests

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bridges, T.L.

    1987-07-01

    Tests were performed on three elastomer seal designs commonly used for nuclear plant containment mechanical penetrations. The objective of this research project is to obtain an understanding of the integrity and leakage behavior of these seal designs under severe accident temperature and pressure conditions. The three designs tested and the seal materials used in the tests were: (1) double tongue-and-groove design with silicone rubber seals, (2) double-O-ring design with neoprene and ethylene-propylene (EPDM) seals, and (3) double gumdrop design with neoprene and EPDM seals. The effects of thermal aging and angular rotations of flange mating surfaces were determined. The testmore » results provide information required to characterize the leakage behavior of penetrations under severe accident conditions. 3 refs., 10 figs., 12 tabs.« less

  15. [Iridology in Ukraine].

    PubMed

    Pokanevych, V V

    1998-05-01

    The paper focuses on the history of origination and development of iridology. The basic stages of formation of iridology as a science in Ukraine are analyzed. Due emphasis is given to the role of iridology as an easy-to-learn method of rapid diagnosis of high informative value. Efficiency is shown of iridodiagnosis as exemplified in Chernobyl accident victims. Iridology is claimed to be a science of much promise in Ukraine.

  16. Representativeness of individual external doses estimated for one quarter of residents in the Fukushima Prefecture after the nuclear disaster: the Fukushima Health Management Survey.

    PubMed

    Ishikawa, Tetsuo; Takahashi, Hideto; Yasumura, Seiji; Ohtsuru, Akira; Sakai, Akira; Ohira, Tetsuya; Sakata, Ritsu; Ozasa, Kotaro; Akahane, Keiichi; Yonai, Shunsuke; Kurihara, Osamu; Kamiya, Kenji; Abe, Masafumi

    2017-09-25

    After the Fukushima Dai-ichi Nuclear Power Plant accident, the Fukushima Health Management Survey (FHMS) was launched. The Basic Survey, a component of FHMS, is a questionnaire used to survey residents across the Fukushima Prefecture about their behaviour in the first 4 months after the accident. The questionnaire findings are used to determine individual external doses by linking behaviour data to a computer programme with daily gamma ray dose rate maps, drawn after the accident. Through 30 June 2015, the response rate was only 27.2% (558 550 population), indicating that the findings might not be generalisable because of poor representativeness of the population. The objective of this study was to clarify if the data from the FHMS Basic Survey were representative of the entire population, by conducting a new survey to compare the external doses between non-respondents and respondents in the previous survey. A total of 5350 subjects were randomly selected from 7 local regions of Fukushima Prefecture. An interview survey was conducted with the non-respondents to the FHMS Basic Survey. A total of 990 responses were obtained from the previous non-responders by interview survey. For the regions Kempoku, Kenchu, Kennan, Aizu, Minami-Aizu, Soso, and Iwaki, differences in mean effective dose (95% confidence interval) in mSv between the non-responders and previous responders were 0.12 (0.01-0.23), -0.09 (-0.21-0.03), -0.06 (-0.18-0.07), 0.05 (-0.04-0.14), 0.01 (-0.01-0.02), 0.09 (0.01-0.17), 0.09 (0.00-0.17), respectively. The differences fall neither within the interval (-∞, -0.25) nor within the interval (0.25, ∞). These findings imply that mean effective doses between the previous and new respondents were not different, with a significantly indifferent region of 0.25 mSv according to equivalence tests. The present study indicates that the dose distribution obtained from about one-quarter of Fukushima residents represents the dose distribution for the entire Fukushima Prefecture.

  17. Interim Status Report for Risk Management for SFRs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jankovsky, Zachary Kyle; Denman, Matthew R.; Groth, Katrina

    2015-10-01

    Accident management is an important component to maintaining risk at acceptable levels for all complex systems, such as nuclear power plants. With the introduction of passive, or inherently safe, reactor designs the focus has shifted from management by operators to allowing the system's design to take advantage of natural phenomena to manage the accident. Inherently and passively safe designs are laudable, but nonetheless extreme boundary conditions can interfere with the design attributes which facilitate inherent safety, thus resulting in unanticipated and undesirable end states. This report examines an inherently safe and small sodium fast reactor experiencing a variety of beyondmore » design basis events with the intent of exploring the utility of a Dynamic Bayesian Network to infer the state of the reactor to inform the operator's corrective actions. These inferences also serve to identify the instruments most critical to informing an operator's actions as candidates for hardening against radiation and other extreme environmental conditions that may exist in an accident. This reduction in uncertainty serves to inform ongoing discussions of how small sodium reactors would be licensed and may serve to reduce regulatory risk and cost for such reactors.« less

  18. An Estimation for Availability of Battery less LF Band RFID Tag to Identify Patients in Operation Room from Viewpoint of Engineering

    NASA Astrophysics Data System (ADS)

    Hosaka, Ryosuke

    Nowadays, medical accidents increase in Japanese patient environment. Especially, misidentification of the patients occurred in operation room of higher level hospitals. It is considered that the great deals of accidents are due to mistakes by nurse. However, the accidents are prevented by management of patients. If a suitable patient identification system is developed, the accidents are prevented. In this study, new patient identification system using battery less LF band RFID(Radio Frequency Identification) is proposed. In the method, battery less RFID tag is attached to patient. In operation room, patient is identified before operation using the proposed system. However, identification distance of RFID is small. It is important that extension of the distance. In this study, antennas of RFID tag and sensor are designed. Two types of tag are proposed. One of them is set on wristband. An antenna for the tag is designed as a circular shape with 30mm in diameter. The other one is shaped like a necklace. The antenna is also designed 220mm, 240mm and 260mm in diameter. Using necklace type new antenna, sufficient identification distance for detection of the tag in the operation room is realized. The patient identification is realized using the proposed system

  19. Boeing flight deck design philosophy

    NASA Technical Reports Server (NTRS)

    Stoll, Harty

    1990-01-01

    Information relative to Boeing flight deck design philosophy is given in viewgraph form. Flight deck design rules, design considerations, functions allocated to the crew, redundancy and automation concerns, and examples of accident data that were reviewed are listed.

  20. Nuclear power and probabilistic safety assessment (PSA): past through future applications

    NASA Astrophysics Data System (ADS)

    Stamatelatos, M. G.; Moieni, P.; Everline, C. J.

    1995-03-01

    Nuclear power reactor safety in the United States is about to enter a new era -- an era of risk- based management and risk-based regulation. First, there was the age of `prescribed safety assessment,' during which a series of design-basis accidents in eight categories of severity, or classes, were postulated and analyzed. Toward the end of that era, it was recognized that `Class 9,' or `beyond design basis,' accidents would need special attention because of the potentially severe health and financial consequences of these accidents. The accident at Three Mile Island showed that sequences of low-consequence, high-frequency events and human errors can be much more risk dominant than the Class 9 accidents. A different form of safety assessment, PSA, emerged and began to gain ground against the deterministic safety establishment. Eventually, this led to the current regulatory requirements for individual plant examinations (IPEs). The IPEs can serve as a basis for risk-based regulation and management, a concept that may ultimately transform the U.S. regulatory process from its traditional deterministic foundations to a process predicated upon PSA. Beyond the possibility of a regulatory environment predicated upon PSA lies the possibility of using PSA as the foundation for managing daily nuclear power plant operations.

  1. Assessment of potential doses to workers during postulated accident conditions at the Waste Isolation Pilot Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hoover, M.D.; Farrell, R.F.; Newton, G.J.

    1995-12-01

    The recent 1995 WIPP Safety Analysis Report (SAR) Update provided detailed analyses of potential radiation doses to members of the public at the site boundary during postulated accident scenarios at the U.S. Department of Energy`s Waste Isolation Pilot Plant (WIPP). The SAR Update addressed the complete spectrum of potential accidents associated with handling and emplacing transuranic waste at WIPP, including damage to waste drums from fires, punctures, drops, and other disruptions. The report focused on the adequacy of the multiple layers of safety practice ({open_quotes}defense-in-depth{close_quotes}) at WIPP, which are designed to (1) reduce the likelihood of accidents and (2) limitmore » the consequences of those accidents. The safeguards which contribute to defense-in-depth at WIPP include a substantial array of inherent design features, engineered controls, and administrative procedures. The SAR Update confirmed that the defense-in-depth at WIPP is adequate to assure the protection of the public and environment. As a supplement to the 1995 SAR Update, we have conducted additional analyses to confirm that these controls will also provide adequate protection to workers at the WIPP. The approaches and results of the worker dose assessment are summarized here. In conformance with the guidance of DOE Standard 3009-94, we emphasize that use of these evaluation guidelines is not intended to imply that these numbers constitute acceptable limits for worker exposures under accident conditions. However, in conjunction with the extensive safety assessment in the 1995 SAR Update, these results indicate that the Carlsbad Area Office strategy for the assessment of hazards and accidents assures the protection of workers, members of the public, and the environment.« less

  2. The SAS4A/SASSYS-1 Safety Analysis Code System, Version 5

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fanning, T. H.; Brunett, A. J.; Sumner, T.

    The SAS4A/SASSYS-1 computer code is developed by Argonne National Laboratory for thermal, hydraulic, and neutronic analysis of power and flow transients in liquidmetal- cooled nuclear reactors (LMRs). SAS4A was developed to analyze severe core disruption accidents with coolant boiling and fuel melting and relocation, initiated by a very low probability coincidence of an accident precursor and failure of one or more safety systems. SASSYS-1, originally developed to address loss-of-decay-heat-removal accidents, has evolved into a tool for margin assessment in design basis accident (DBA) analysis and for consequence assessment in beyond-design-basis accident (BDBA) analysis. SAS4A contains detailed, mechanistic models of transientmore » thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, its coolant, fuel elements, and structural members to accident conditions. The core channel models in SAS4A provide the capability to analyze the initial phase of core disruptive accidents, through coolant heat-up and boiling, fuel element failure, and fuel melting and relocation. Originally developed to analyze oxide fuel clad with stainless steel, the models in SAS4A have been extended and specialized to metallic fuel with advanced alloy cladding. SASSYS-1 provides the capability to perform a detailed thermal/hydraulic simulation of the primary and secondary sodium coolant circuits and the balance-ofplant steam/water circuit. These sodium and steam circuit models include component models for heat exchangers, pumps, valves, turbines, and condensers, and thermal/hydraulic models of pipes and plena. SASSYS-1 also contains a plant protection and control system modeling capability, which provides digital representations of reactor, pump, and valve controllers and their response to input signal changes.« less

  3. Correlation of causal factors that influence construction safety performance: A model.

    PubMed

    Rodrigues, F; Coutinho, A; Cardoso, C

    2015-01-01

    The construction sector has presented positive development regarding the decrease in occupational accident rates in recent years. Regardless, the construction sector stands out systematically from other industries due to its high number of fatalities. The aim of this paper is to deeply understand the causality of construction accidents from the early design phase through a model. This study reviewed several research papers presenting various analytical models that correlate the contributing factors to occupational accidents in this sector. This study also analysed different construction projects and conducted a survey of design and site supervision teams. This paper proposes a model developed from the analysis of existing ones, which correlates the causal factors through all the construction phases. It was concluded that effective risk prevention can only be achieved by a global correlation of causal factors including not only production ones but also client requirements, financial climate, design team competence, project and risk management, financial capacity, health and safety policy and early planning. Accordingly, a model is proposed.

  4. Possible consequences of severe accidents at the Lubiatowo site, Poland

    NASA Astrophysics Data System (ADS)

    Seibert, Petra; Philipp, Anne; Hofman, Radek; Gufler, Klaus; Sholly, Steven

    2014-05-01

    The construction of a nuclear power plant is under consideration in Poland. One of the sites under discussion is near Lubiatowo, located on the cost of the Baltic Sea northwest of Gdansk. An assessment of possible environmental consequences is carried out for 88 real meteorological cases with the Lagrangian particle dispersion model FLEXPART. Based on literature research, three reactor designs (ABWR, EPR, AP 1000) were identified as being under discussion in Poland. For each of the designs, a set of accident scenarios was evaluated and two source terms per reactor design were selected for analysis. One of the selected source terms was a relatively large release while the second one was a severe accident with an intact containment. Considered endpoints of the calculations are ground contamination with Cs-137 and time-integrated concentrations of I-131 in air as well as committed doses. They are evaluated on a grid of ca. 3 km mesh size covering eastern Central Europe.

  5. The effect of Center High Mounted Stop Lamp (CHMSL) on rear-end accidents in Israel.

    PubMed

    Bar-Gera, Hillel; Schechtman, Edna

    2005-05-01

    This paper examines the effect of the use of Center High Mounted Stop Lamp (CHMSL) on rear-end accidents, as reflected in Israeli police records from calendar years 1991-2002. The basic analysis, similar to that used in previous CHMSL studies, compares the involvement in accidents of passenger cars of model years 1994-1996 that are equipped with CHMSL with passenger cars of model years 1991-1993 that are not equipped with CHMSL. The number of involvements as the struck vehicle in a rear-end accident was used as the relevant measurement and the number of involvements as the striking vehicle in a rear-end accident was used as the reference measurement. The results yielded an odds ratio of 0.93. The explanation that the CHMSL is responsible for the 7% decrease is intuitively appealing and is consistent with previous findings. However, the strength of this evidence is marginal (p = 0.07). Additional analyses evaluated the model year effect in greater detail, in order to determine whether there exists a change point between 1993 and 1994 as would be expected from a CHMSL effect, or whether the effect is spurious. Detailed analyses were performed on the ratio of struck to striking involvements as well as the rates of involvement of both types. These analyses showed that (1) the chosen reference measurement is an appropriate one, but (2) the 0.93 odds ratio is quite possibly due to other reasons unrelated to the CHMSL, thus further limiting the confidence in CHMSL effectiveness.

  6. An extension of the theory of planned behavior to predict pedestrians' violating crossing behavior using structural equation modeling.

    PubMed

    Zhou, Hongmei; Romero, Stephanie Ballon; Qin, Xiao

    2016-10-01

    This paper aimed to examine pedestrians' self-reported violating crossing behavior intentions by applying the theory of planned behavior (TPB). We studied the behavior intentions regarding instrumental attitude, subjective norm, perceived behavioral control, the three basic components of TPB, and extended the theory by adding new factors including descriptive norm, perceived risk and conformity tendency to evaluate their respective impacts on pedestrians' behavior intentions. A questionnaire presented with a scenario that pedestrians crossed the road violating the pedestrian lights at an intersection was designed, and the survey was conducted in Dalian, China. Based on the 260 complete and valid responses, reliability and validity of the data for each question was evaluated. The data were then analyzed by using the structural equation modeling (SEM). The results showed that people had a negative attitude toward the behavior of violating road-crossing rules; they perceived social influences from their family and friends; and they believed that this kind of risky behavior would potentially harm them in a traffic accident. The results also showed that instrumental attitude and subjective norm were significant in the basic TPB model. After adding descriptive norm, subjective norm was no more significant. Other models showed that conformity tendency was a strong predictor, indicating that the presence of other pedestrians would influence behavioral intention. The findings could help to design more effective interventions and safety campaigns, such as changing people's attitude toward this violation behavior, correcting the social norms, increasing their safety awareness, etc. in order to reduce pedestrians' road crossing violations. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Maximal design basis accident of fusion neutron source DEMO-TIN

    NASA Astrophysics Data System (ADS)

    Kolbasov, B. N.

    2015-12-01

    When analyzing the safety of nuclear (including fusion) facilities, the maximal design basis accident at which the largest release of activity is expected must certainly be considered. Such an accident is usually the failure of cooling systems of the most thermally stressed components of a reactor (for a fusion facility, it is the divertor or the first wall). The analysis of safety of the ITER reactor and fusion power facilities (including hybrid fission-fusion facilities) shows that the initial event of such a design basis accident is a large-scale break of a pipe in the cooling system of divertor or the first wall outside the vacuum vessel of the facility. The greatest concern is caused by the possibility of hydrogen formation and the inrush of air into the vacuum chamber (VC) with the formation of a detonating mixture and a subsequent detonation explosion. To prevent such an explosion, the emergency forced termination of the fusion reaction, the mounting of shutoff valves in the cooling systems of the divertor and the first wall or blanket for reducing to a minimum the amount of water and air rushing into the VC, the injection of nitrogen or inert gas into the VC for decreasing the hydrogen and oxygen concentration, and other measures are recommended. Owing to a continuous feed-out of the molten-salt fuel mixture from the DEMO-TIN blanket with the removal period of 10 days, the radioactivity release at the accident will mainly be determined by tritium (up to 360 PBq). The activity of fission products in the facility will be up to 50 PBq.

  8. A Formal Methods Approach to the Analysis of Mode Confusion

    NASA Technical Reports Server (NTRS)

    Butler, Ricky W.; Miller, Steven P.; Potts, James N.; Carreno, Victor A.

    2004-01-01

    The goal of the new NASA Aviation Safety Program (AvSP) is to reduce the civil aviation fatal accident rate by 80% in ten years and 90% in twenty years. This program is being driven by the accident data with a focus on the most recent history. Pilot error is the most commonly cited cause for fatal accidents (up to 70%) and obviously must be given major consideration in this program. While the greatest source of pilot error is the loss of situation awareness , mode confusion is increasingly becoming a major contributor as well. The January 30, 1995 issue of Aviation Week lists 184 incidents and accidents involving mode awareness including the Bangalore A320 crash 2/14/90, the Strasbourg A320 crash 1/20/92, the Mulhouse-Habsheim A320 crash 6/26/88, and the Toulouse A330 crash 6/30/94. These incidents and accidents reveal that pilots sometimes become confused about what the cockpit automation is doing. Consequently, human factors research is an obvious investment area. However, even a cursory look at the accident data reveals that the mode confusion problem is much deeper than just training deficiencies and a lack of human-oriented design. This is readily acknowledged by human factors experts. It seems that further progress in human factors must come through a deeper scrutiny of the internals of the automation. It is in this arena that formal methods can contribute. Formal methods refers to the use of techniques from logic and discrete mathematics in the specification, design, and verification of computer systems, both hardware and software. The fundamental goal of formal methods is to capture requirements, designs and implementations in a mathematically based model that can be analyzed in a rigorous manner. Research in formal methods is aimed at automating this analysis as much as possible. By capturing the internal behavior of a flight deck in a rigorous and detailed formal model, the dark corners of a design can be analyzed. This paper will explore how formal models and analyses can be used to help eliminate mode confusion from flight deck designs and at the same time increase our confidence in the safety of the implementation. The paper is based upon interim results from a new project involving NASA Langley and Rockwell Collins in applying formal methods to a realistic business jet Flight Guidance System (FGS).

  9. Hot surface temperatures of domestic appliances.

    PubMed

    Bassett, Malcolm; Arild, Anne-Helene

    2002-09-01

    Domestic appliances are burning people. In the European Union, accidents requiring hospital treatment due to burns from hot objects account for between 0 and 1% of all such accidents. Young children are particularly at risk. These reported accidents requiring hospital treatment are also likely to be a small proportion of the total number of burns from hot objects. There is a lack of hard evidence about the level of accidents, typical consumer expectation and use, and on the state of the art of appliances. Results of technical laboratory tests carried out on products are used to demonstrate the state of the art and also show how consumer expectations could be changing. Results of a survey into accidents, based on a written questionnaire following telephone contact, provide information on non-hospital cases. Results of tests on products show that there are significant differences in the temperatures of touchable surfaces, even in products of the same type. Typically, these differences are due to variations in design and/or materials of construction. Some products are hot enough to burn skin. Accident research indicates that non-hospital medical practices are treating burn injuries, which are therefore not being included into the current accident statistics. For products with the same function, some types of design or materials of construction are safer, with lower surface temperatures. Many product standards have no or unnecessarily high limits on surface temperatures. Many standards do not address the realities of who is using their products, for what purpose or where they are located. Some standards use unreasonable general limitations and exclusions that allow products with higher surface temperatures than they should have. Many standards rely on the experience factor for avoiding injury that is no longer valid, with the increased availability of safer products of the same type. A major field of work ahead is to carry out more surveys and in-depth studies of non-fatal accidents and injuries.

  10. Application of systems and control theory-based hazard analysis to radiation oncology.

    PubMed

    Pawlicki, Todd; Samost, Aubrey; Brown, Derek W; Manger, Ryan P; Kim, Gwe-Ya; Leveson, Nancy G

    2016-03-01

    Both humans and software are notoriously challenging to account for in traditional hazard analysis models. The purpose of this work is to investigate and demonstrate the application of a new, extended accident causality model, called systems theoretic accident model and processes (STAMP), to radiation oncology. Specifically, a hazard analysis technique based on STAMP, system-theoretic process analysis (STPA), is used to perform a hazard analysis. The STPA procedure starts with the definition of high-level accidents for radiation oncology at the medical center and the hazards leading to those accidents. From there, the hierarchical safety control structure of the radiation oncology clinic is modeled, i.e., the controls that are used to prevent accidents and provide effective treatment. Using STPA, unsafe control actions (behaviors) are identified that can lead to the hazards as well as causal scenarios that can lead to the identified unsafe control. This information can be used to eliminate or mitigate potential hazards. The STPA procedure is demonstrated on a new online adaptive cranial radiosurgery procedure that omits the CT simulation step and uses CBCT for localization, planning, and surface imaging system during treatment. The STPA procedure generated a comprehensive set of causal scenarios that are traced back to system hazards and accidents. Ten control loops were created for the new SRS procedure, which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Eighty three unsafe control actions were identified as well as 472 causal scenarios that could lead to those unsafe control actions. STPA provides a method for understanding the role of management decisions and hospital operations on system safety and generating process design requirements to prevent hazards and accidents. The interaction of people, hardware, and software is highlighted. The method of STPA produces results that can be used to improve safety and prevent accidents and warrants further investigation.

  11. Accidence and Acronyms: Deploying Electronic Assessment in Support of Classical Language Teaching in a University Context

    ERIC Educational Resources Information Center

    Ashdowne, Richard

    2009-01-01

    This article describes the process of design and implementation of GALACTICA ("Greek And Latin Accidence Consolidation Training, Internet-Centred Assessment") in support of the University of Oxford's Classics Faculty language consolidation classes. The context and aims of the previous paper-based "assessment" system are…

  12. APT Blanket System Loss-of-Coolant Accident (LOCA) Based on Initial Conceptual Design - Case 4: External Pressurizer Surge Line Break Near Inlet Header

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hamm, L.L.

    1998-10-07

    This report is one of a series of reports documenting accident scenario simulations for the Accelerator Production of Tritium (APT) blanket heat removal systems. The simulations were performed in support of the Preliminary Safety Analysis Report (PSAR) for the APT.

  13. APT Blanket System Loss-of-Coolant Accident (LOCA) Analysis Based on Initial Conceptual Design - Case 3: External HR Break at Pump Outlet without Pump Trip

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hamm, L.L.

    1998-10-07

    This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal (HR) system. These simulations were performed for the Preliminary Safety Analysis Report.

  14. BESAFE II: Accident safety analysis code for MFE reactor designs

    NASA Astrophysics Data System (ADS)

    Sevigny, Lawrence Michael

    The viability of controlled thermonuclear fusion as an alternative energy source hinges on its desirability from an economic and an environmental and safety standpoint. It is the latter which is the focus of this thesis. For magnetic fusion energy (MFE) devices, the safety concerns equate to a design's behavior during a worst-case accident scenario which is the loss of coolant accident (LOCA). In this dissertation, we examine the behavior of MFE devices during a LOCA and how this behavior relates to the safety characteristics of the machine; in particular the acute, whole-body, early dose. In doing so, we have produced an accident safety code, BESAFE II, now available to the fusion reactor design community. The Appendix constitutes the User's Manual for BESAFE II. The theory behind early dose calculations including the mobilization of activation products is presented in Chapter 2. Since mobilization of activation products is a strong function of temperature, it becomes necessary to calculate the thermal response of a design during a LOCA in order to determine the fraction of the activation products which are mobilized and thus become the source for the dose. The code BESAFE II is designed to determine the temperature history of each region of a design and determine the resulting mobilization of activation products at each point in time during the LOCA. The BESAFE II methodology is discussed in Chapter 4, followed by demonstrations of its use for two reference design cases: a PCA-Li tokamak and a SiC-He tokamak. Of these two cases, it is shown that the SiC-He tokamak is a better design from an accident safety standpoint than the PCA-Li tokamak. It is also found that doses derived from temperature-dependent mobilization data are different than those predicted using set mobilization categories such as those that involve Piet fractions. This demonstrates the need for more experimental data on fusion materials. The possibility for future improvements and modifications to BESAFE II is discussed in Chapter 6, for example, by adding additional environmental indices such as a waste disposal index. The biggest improvement to BESAFE II would be an increase in the database of activation product mobilization for a larger spectrum of fusion reactor materials. The ultimate goal we have is for BESAFE II to become part of a systems design program which would include economic factors and allow both safety and the cost of electricity to influence design.

  15. Systems analysis of the installation, mounting, and activation of emergency locator transmitters in general aviation aircraft

    NASA Technical Reports Server (NTRS)

    Hall, D. S.

    1980-01-01

    A development program was developed to design and improve the Emergency Locator Transmitter (ELT) transmitter and to improve the installation in the aircraft and its activation subsystem. There were 1135 general aviation fixed wing aircraft accident files reviewed. A detailed description of the damage to the aircraft was produced. The search aspects of these accidents were studied. As much information as possible about the ELT units in these cases was collected. The data should assist in establishing installation and mounting criteria, better design standards for activation subsystems, and requirements for the new ELT system design in the area of crashworthiness.

  16. Exploring the relationship between alcohol and the driver characteristics in motor vehicle accidents.

    PubMed

    Abdel-Aty, M A; Abdelwahab, H T

    2000-07-01

    This study examines the differences in alcohol-related accident involvement among different driver groups in the state of Florida. The driver characteristics considered in this study are: age, gender, race, and residency of the driver of a motor vehicle involved in an accident while under the influence of alcohol, drugs, or alcohol and drugs. The main objective of this study is to test whether there are associations between the different driver characteristics and alcohol involvement in traffic accidents, and to identify the high-risk group within each driver factor. This would improve our understanding of the relationship between alcohol involvement, accidents, and the four aforementioned driver factors. It would also enable us to better design educational and awareness programs targeting specific groups in the population to reduce drinking and driving in the state. The relationship between alcohol-related accident involvement and the driver factors are investigated using general descriptive statistics, conditional probabilities and log-linear models. The results showed that the 25-34 age group experience the highest rate of alcohol/drug involvement in accidents. The rates decline with the increase in the age of the drivers. The results also indicated that there are significant relationships between the driver characteristics and alcohol/drug involvement in accidents. Male, white, and in-state drivers were also more involved in alcohol/drugs-related traffic accidents.

  17. A Study to Determine the Need for a Standard Limiting the Horsepower of Recreational Boats.

    DTIC Science & Technology

    1978-09-01

    Acceptance Number of Number Fatal Accidents Non -Fatal Accidents - (Lost control ) 1 93 2 :No attempt to avoid collision) 1 19 72 fAttempted to avoic, not enough...base, and an explanation of the computer SModel designed to aid in organizing and analyzing the data are presented with the results of the analyses. An...Standard 75 S 3.2 Non -Powering Related Accident Sample 76 3.3 Coded Information and Coding Form 77 • - 3.4 Effectiveness Evaluation of the Current

  18. LNG risk management

    NASA Astrophysics Data System (ADS)

    Martino, P.

    1980-12-01

    A general methodology is presented for conducting an analysis of the various aspects of the hazards associated with the storage and transportation of liquefied natural gas (LNG) which should be considered during the planning stages of a typical LNG ship terminal. The procedure includes the performance of a hazards and system analysis of the proposed site, a probability analysis of accident scenarios and safety impacts, an analysis of the consequences of credible accidents such as tanker accidents, spills and fires, the assessment of risks and the design and evaluation of risk mitigation measures.

  19. APT Blanket System Loss-of-Coolant Accident (LOCA) Based on Initial Conceptual Design - Case 2: with Beam Shutdown Only

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hamm, L.L.

    1998-10-07

    This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal system. These simulations were performed for the Preliminary Safety Analysis Report. This report documents the results of simulations of a Loss-of-Flow Accident (LOFA) where power is lost to all of the pumps that circulate water in the blanket region, the accelerator beam is shut off and neither the residual heat removal nor cavity flood systems operate.

  20. [Preparation of the database and the homepage on chemical accidents relating to health hazard].

    PubMed

    Yamamoto, M; Morita, M; Kaminuma, T

    1998-01-01

    We collected the data on accidents due to chemicals occurred in Japan, and prepared the database. We also set up the World Wide Web homepage containing the explanation on accidents due to chemicals and the retrieval page for the database. We designed the retrieval page so that users can search the data from keywords such as chemicals (e.g. chlorine gas, hydrogen sulfide, pesticides), places (e.g. home, factory, vehicles, tank), causes (e.g. reaction, leakage, exhaust gas) and others (e.g. cleaning, painting, transportation).

  1. Rotating shift work, sleep, and accidents related to sleepiness in hospital nurses

    NASA Technical Reports Server (NTRS)

    Gold, D. R.; Rogacz, S.; Bock, N.; Tosteson, T. D.; Baum, T. M.; Speizer, F. E.; Czeisler, C. A.

    1992-01-01

    A hospital-based survey on shift work, sleep, and accidents was carried out among 635 Massachusetts nurses. In comparison to nurses who worked only day/evening shifts, rotators had more sleep/wake cycle disruption and nodded off more at work. Rotators had twice the odds of nodding off while driving to or from work and twice the odds of a reported accident or error related to sleepiness. Application of circadian principles to the design of hospital work schedules may result in improved health and safety for nurses and patients.

  2. Survey of awareness about hazardous chemicals of residents living near chemical plants in South Korea.

    PubMed

    Han, Don-Hee; Park, Min Soo

    2018-02-10

    With economic growth, the use of chemicals has continually increased, resulting in an increase of chemical accidents. Chemical accidents pose a life threat and can lead to many health problems among the residents living in close proximity to chemical plants. This study aimed to investigate the awareness of the residents living near chemical plants about hazardous chemicals, as well as to survey the awareness of workers who do not directly handle chemicals at chemical plants (WNHCs). To this end, a questionnaire survey was conducted among a total of 600 residents and 160 WNHCs. The questionnaire was composed of three items: awareness of chemical risk, awareness of countermeasures in chemical accidents, and imperious necessity of PPE (personal protective equipment). Statistical analysis of the data was performed with the Statistical Package for Social Sciences (SPSS) version 18.0. The results show that the government needs to complement the notification system of chemical risk for residents who live close to chemical plants. The highest priority of PPE which residents want to prepare for chemical accidents was respiratory protective equipment (RPE). They responded that, if necessary to purchase PPE, they could bear a portion of the expenses (up to US $30). This study provides basic data for the development of programs and policies on chemical safety relevant for the residents living in close proximity to chemical plants in South Korea.

  3. Simulation of hydrostatic water level measuring system for pressure vessels with the ATHLET-code

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hampel, R.; Vandreier, B.; Kaestner, W.

    1996-11-01

    The static and dynamic behavior of measuring systems determine the value indicated by the measuring systems in relation to the true operating conditions. This paper demonstrates the necessity to involve the behavior of measuring systems in accident analysis with the thermohydraulic code ATHLET (developed by GRS Germany) by the example of hydrostatic water level measurement for horizontal steam generators on NPP (VVER). The modelling of a comparison vessel for the level measuring system with high sensitivity and a limited range of measurement (narrow-range level measuring system) by using ATHLET components and the checking of the function of the module weremore » realized. A good correspondence (maximal deviation 3%) between the measured and calculated narrow-range water level by the module was obtained for a realized post calculation of a measured operational transient in a NPP (VVER). The research carried out was sponsored by the Federal Ministry for Research and Technology within the projects {open_quotes}Basic research of process and system behaviour of NPP, control technique for accident management{close_quotes} (Project number 150 0855/7) and the project RS 978. The research work appertains to the theoretic and experimental work of institute {open_quotes}Institut fuer ProzeBtechnik, ProzeBautomatisierung und MeBtechnik (IPM){close_quotes} for accident analysis and accident management.« less

  4. Fall-related accidents among hikers in the Austrian Alps: a 9-year retrospective study

    PubMed Central

    Faulhaber, Martin; Pocecco, Elena; Ruedl, Gerhard; Walter, Dagmar; Sterr, Regina; Ebner, Hans; Schobersberger, Wolfgang; Burtscher, Martin

    2017-01-01

    Objective To analyse the circumstances of fatal and non-fatal mountain hiking accidents caused by falls. Methods The study was designed as a retrospective analysis. Mountain hiking accidents caused by falls were documented during a 9-year period (2006–2014). After screening of all data for potential exclusion criteria the final sample size of 5368 accidents and 5665 victims was included into the analyses. Main outcome measures were details about accidents, victims, type of trail and surface. Results The annual number of accidents showed a continuous increase from 467 in 2006 to 700 in 2014. In total, 5.8% of all victims died during the 9-year period. 75.3% of the hikers fell during descent and 80.9% of the victims had their accident on a marked hiking trail or small path. The sex ratio for non-fatal accidents was 55% female and 45% male; for fatal accidents the female-to-male ratio was 28%:72%. Mean age of all victims was 52.5±17.5 years and victims of fatalities were about 5 years older compared with victims of non-fatal accidents (57.5±16.5 vs 52.2±17.5 years, P<0.01). Conclusion Descent is the most risky part for accidents caused by falls during mountain hiking. Male hikers are at greater risk for fatalities independent of age and this is associated with accidents occurring in pathless terrain. The death rate from falls was 6%. We recommend a critical self-assessment of the individual capabilities and mountain hiking skills and adequate planning of the hiking tours for mountain hikers. PMID:29259815

  5. Driving behaviors and on-duty road accidents: a French case-control study.

    PubMed

    Fort, Emmanuel; Chiron, Mireille; Davezies, Philippe; Bergeret, Alain; Charbotel, Barbara

    2013-01-01

    A case-control study was carried out to identify driving behaviors associated with the risk of on-duty road accident and to compare driving behaviors according to the type of journey (on duty, commuting, and private) for on-duty road accident victims. Cases were recruited from the Rhône Road Trauma Registry between January 2004 and October 2005 and were on duty at the time of the accident. Control subjects were recruited from the electoral rolls of the case subjects' constituencies of residence. Cases' and controls' driving behavior data were collected by self-administered questionnaire. A logistic regression was performed to identify behavioral risk factors for on-duty road accidents, taking into account age, sex, place of residence, road accident risk exposure, socio-occupational category, and type of road user. A second analysis focused specifically on the case subjects, comparing their self-assessed usual behaviors according to the type of journey. Significant factors for multivariate analysis of on-duty road accidents were female gender, history of on-duty road accidents during the previous 10 years, severe time pressure at work, and driving a vehicle not belonging to the driver. On-duty road accident victims reported behavioral risk factors more frequently in relation to driving for work than driving for private reasons or commuting: nonsystematic seat belt use, cell phone use at least once daily while driving, and history of accidents with injury during the previous 10 years. This study provides knowledge on behavioral risk factors for on-duty road accidents and differences in behavior according to the type of journey for subjects who have been on-duty road accident victims. These results will be useful for the design of on-duty road risk prevention.

  6. Organisational Factors of Occupational Accidents with Movement Disturbance (OAMD) and Prevention

    PubMed Central

    LECLERCQ, Sylvie

    2014-01-01

    Workplace design and upkeep, or human factors, are frequently advanced for explaining so-called Occupational Slip, Trip and Fall Accidents (OSTFAs). Despite scientific progress, these accidents, and more broadly Occupational Accidents with Movement Disturbance (OAMDs), are also commonly considered to be “simple”. This paper aims to stimulate changes in such perceptions by focusing on organisational factors that often combine with other accident factors to cause movement disturbance and injury in work situations. These factors frequently lead to arbitration between production and safety, which involves implementation of controls by workers. These controls can lead to greater worker exposure to OAMD risk. We propose a model that focuses on such controls to account specifically for the need to confront production and safety logics within a company and to enhance the potential for appropriate prevention action. These are then integrated into the set of controls highlighted by work organisation model developed by the NIOSH. PMID:25345425

  7. Automations influence on nuclear power plants: a look at three accidents and how automation played a role.

    PubMed

    Schmitt, Kara

    2012-01-01

    Nuclear power is one of the ways that we can design an efficient sustainable future. Automation is the primary system used to assist operators in the task of monitoring and controlling nuclear power plants (NPP). Automation performs tasks such as assessing the status of the plant's operations as well as making real time life critical situational specific decisions. While the advantages and disadvantages of automation are well studied in variety of domains, accidents remind us that there is still vulnerability to unknown variables. This paper will look at the effects of automation within three NPP accidents and incidents and will consider why automation failed in preventing these accidents from occurring. It will also review the accidents at the Three Mile Island, Chernobyl, and Fukushima Daiichi NPP's in order to determine where better use of automation could have resulted in a more desirable outcome.

  8. Automated vehicle for railway track fault detection

    NASA Astrophysics Data System (ADS)

    Bhushan, M.; Sujay, S.; Tushar, B.; Chitra, P.

    2017-11-01

    For the safety reasons, railroad tracks need to be inspected on a regular basis for detecting physical defects or design non compliances. Such track defects and non compliances, if not detected in a certain interval of time, may eventually lead to severe consequences such as train derailments. Inspection must happen twice weekly by a human inspector to maintain safety standards as there are hundreds and thousands of miles of railroad track. But in such type of manual inspection, there are many drawbacks that may result in the poor inspection of the track, due to which accidents may cause in future. So to avoid such errors and severe accidents, this automated system is designed.Such a concept would surely introduce automation in the field of inspection process of railway track and can help to avoid mishaps and severe accidents due to faults in the track.

  9. Some inadequacies of the current human factors certification process of advanced aircraft technologies

    NASA Technical Reports Server (NTRS)

    Paries, Jean

    1994-01-01

    Automation related accidents or serious incidents are not limited to advanced technology aircraft. There is a full history of such accidents with conventional technology aircraft. However, this type of occurrence is far from sparing the newest 'glass cockpit' generation, and it even seems to be a growing contributor to its accident rate. Nevertheless, all these aircraft have been properly certificated according to the relevant airworthiness regulations. Therefore, there is a growing concern that with the technological advancement of air transport aircraft cockpits, the current airworthiness regulations addressing cockpit design and human factors may have reached some level of inadequacy. This paper reviews some aspects of the current airworthiness regulations and certification process related to human factors of cockpit design and focuses on questioning their ability to guarantee the intended safety objectives.

  10. Assessment of environmental public exposure from a hypothetical nuclear accident for Unit-1 Bushehr nuclear power plant.

    PubMed

    Sohrabi, M; Ghasemi, M; Amrollahi, R; Khamooshi, C; Parsouzi, Z

    2013-05-01

    Unit-1 of the Bushehr nuclear power plant (BNPP-1) is a VVER-type reactor with 1,000-MWe power constructed near Bushehr city at the coast of the Persian Gulf, Iran. The reactor has been recently operational to near its full power. The radiological impact of nuclear power plant (NPP) accidents is of public concern, and the assessment of radiological consequences of any hypothetical nuclear accident on public exposure is vital. The hypothetical accident scenario considered in this paper is a design-basis accident, that is, a primary coolant leakage to the secondary circuit. This scenario was selected in order to compare and verify the results obtained in the present paper with those reported in the Final Safety Analysis Report (FSAR 2007) of the BNPP-1 and to develop a well-proven methodology that can be used to study other and more severe hypothetical accident scenarios for this reactor. In the present study, the version 2.01 of the PC COSYMA code was applied. In the early phase of the accidental releases, effective doses (from external and internal exposures) as well as individual and collective doses (due to the late phase of accidental releases) were evaluated. The surrounding area of the BNPP-1 within a radius of 80 km was subdivided into seven concentric rings and 16 sectors, and distribution of population and agricultural products was calculated for this grid. The results show that during the first year following the modeled hypothetical accident, the effective doses do not exceed the limit of 5 mSv, for the considered distances from the BNPP-1. The results obtained in this study are in good agreement with those in the FSAR-2007 report. The agreement obtained is in light of many inherent uncertainties and variables existing in the two modeling procedures applied and proves that the methodology applied here can also be used to model other severe hypothetical accident scenarios of the BNPP-1 such as a small and large break in the reactor coolant system as well as beyond design-basis accidents. Such scenarios are planned to be studied in the near future, for this reactor.

  11. Designing the accident and emergency system: lessons from manufacturing

    PubMed Central

    Walley, P

    2003-01-01

    Objectives: To review the literature on manufacturing process design and demonstrate applicability in health care. Methods: Literature review and application of theory using two years activity data from two healthcare communities and extensive observation of activities over a six week period by seven researchers. Results: It was possible to identify patient flows that could be used to design treatment processes around the needs of the patient. Some queues are built into existing treatment processes and can be removed by better process design. Capacity imbalance, not capacity shortage, causes some unnecessary waiting in accident and emergency departments. Conclusions: Clinicians would find that modern manufacturing theories produce more acceptable designs of systems. In particular, good quality is seen as a necessary pre-requisite of fast, efficient services. PMID:12642523

  12. The power of simplification: Operator interface with the AP1000{sup R} during design-basis and beyond design-basis events

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Williams, M. G.; Mouser, M. R.; Simon, J. B.

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and cost. The passive safety features are designed to function without safety-grade support systems such as component cooling water, service water, compressed air or HVAC. The AP1000 passive safety features achieve and maintain safe shutdown in case of a design-basis accident for 72 hours without need for operator action, meeting the expectations provided in the European Utility Requirements and the Utility Requirement Document for passive plants. Limited operator actions may be required to maintain safe conditionsmore » in the spent fuel pool (SFP) via passive means. This safety approach therefore minimizes the reliance on operator action for accident mitigation, and this paper examines the operator interaction with the Human-System Interface (HSI) as the severity of an accident increases from an anticipated transient to a design basis accident and finally, to a beyond-design-basis event. The AP1000 Control Room design provides an extremely effective environment for addressing the first 72 hours of design-basis events and transients, providing ease of information dissemination and minimal reliance upon operator actions. Symptom-based procedures including Emergency Operating Procedures (EOPs), Abnormal Operating Procedures (AOPs) and Alarm Response Procedures (ARPs) are used to mitigate design basis transients and accidents. Use of the Computerized Procedure System (CPS) aids the operators during mitigation of the event. The CPS provides cues and direction to the operators as the event progresses. If the event becomes progressively worse or lasts longer than 72 hours, and depending upon the nature of failures that may have occurred, minimal operator actions may be required outside of the control room in areas that have been designed to be accessible using components that have been designed to be reliable in these conditions. The primary goal of any such actions is to maintain or refill the passive inventory available to cool the core, containment and spent fuel pool in the safety-related and seismically qualified Passive Containment Cooling Water Storage Tank (PCCWST). The seismically-qualified, ground-mounted Passive Containment Cooling Ancillary Water Storage Tank (PCCAWST) is also available for this function as appropriate. The primary effect of these actions would be to increase the coping time for the AP1000 during design basis events, as well as events such as those described above, from 72 hours without operator intervention to 7 days with minimal operator actions. These Operator actions necessary to protect the health and safety of the public are addressed in the Post-72 Hour procedures, as well as some EOPs, AOPs, ARPs and the Severe Accident Management Guidelines (SAMGs). Should the event continue to become more severe and plant conditions degrade further with indications of inadequate core cooling, the SAMGs provide guidance for strategies to address these hypothetical severe accident conditions. The AP1000 SAMG diagnoses and actions are prioritized to first utilize the AP1000 features that are expected to retain a damaged core inside the reactor vessel. Only one strategy is undertaken at any time. This strategy will be followed and its effectiveness evaluated before other strategies are undertaken. This is a key feature of both the symptom-oriented AP1000 EOPs and the AP1000 SAMGs which maximizes the probability of retaining a damaged core inside the reactor vessel and containment while minimizing the chances for confusion and human errors during implementation. The AP1000 SAMGs are simple and straight-forward and have been developed with considerable input from human factors and plant operations experts. Most importantly, and different from severe accident management strategies for other plants, the AP1000 SAMGs do not require diagnosis of the location of the core (i.e., whether reactor vessel failure has occurred). This is a fundamental consequence of the AP1000 In-Vessel Retention approach, which allows severe accident management to be based on fundamental principles (e.g. provide coolant as close as possible to the core) that do not change during a specific event. This eliminates the need for one of the more difficult diagnostic requirements, since reactor vessel failure does not directly relate to any measurable plant parameter, and differs from other designs in that an engineered failure of the pressure vessel' (e.g. core catcher) is never required. (authors)« less

  13. An Incidental Finding of Eisenmenger Syndrome in an Adult Following a Motor Vehicle Accident

    DTIC Science & Technology

    2017-05-19

    and your department has told you they cannot fund your publication, the 59th Clinical Research Division may pay for your basic journal publishing...you in your future publication/presentation efforts. ~EL-GOODWIN, Col, USAF, BSC Director, Clinical Investigations & Research Support Warrior Medics...being struck by a motor vehicle, initially intubated for airway protection, admitted to our facility as a trauma patient. Noted orthopedic injuries

  14. Behavior and lifestyle characteristics of male Kuwaiti drivers.

    PubMed

    Al-Hemoud, Ali M; Simmons, Rodney J; Al-Asfoor, May M

    2010-08-01

    The high traffic accident risk among young drivers is a well-known and well-documented fact in most countries. Lifestyle has proven to affect driving behavior as well as accident risk. This study covers the lifestyle component of the problems related to young male Kuwaiti drivers' accident risk. The purpose of the study is to measure the relationship between lifestyle and accident risk. Lifestyle is measured through a questionnaire, where 302 male Kuwaiti drivers (mean age=28 years; range 25-35 years) answer 39 questions related to behavioral and social factors, road conditions, police enforcement, and life satisfaction. They also report their involvement in accidents and traffic violations. The questionnaire's validity and reliability (Cronbach's alpha=0.7) were achieved. Principal component analysis reduced the 39 items on the questionnaire to 5 factors. Inadequate police enforcement is strongly correlated (r=0.862) to accident risk and traffic violations and is thus considered the best predictor of traffic accidents in Kuwait. As driving-related incidents (on-the-job and off-the-job) are a significant source of fatalities and lost-work-days, the study points to the importance of considering cultural factors in the design of comprehensive safety programs for industry. 2010. Published by Elsevier Ltd.

  15. Content analysis of 100 consecutive media reports of amusement ride accidents.

    PubMed

    Woodcock, Kathryn

    2008-01-01

    Accident investigations influence public perceptions and safety management strategies by determining the amount and type of information learned about the accident. To examine the factors considered in investigations, this study used a content analysis of 100 consecutive media reports of amusement ride accidents from an online media archive. Fatalities were overrepresented in the media dataset compared with U.S. national estimates. For analysis of reports, a modified "Haddon matrix" was developed using human-factors categories. This approach was useful to show differences between the proportions and types of factors considered in the different accident stages and between employee and rider accidents. Employee injury accounts primarily referred to the employee's task and to the employee. Rider injury reports were primarily related to the ride device itself and rarely referred to the rider's "task", social influences, or the rider's own actions, and only some reference to their characteristics. Qualitatively, it was evident that more human factors analysis is required to augment scant pre-failure information about the task, social environment, and the person, to make that information available for prevention of amusement ride accidents. By design, this study reflected information reported by the media. Future work will use the same techniques with official reports.

  16. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Tutorial

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    C. L. Smith; S. T. Beck; S. T. Wood

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of computer programs that were developed to create and analyze probabilistic risk assessment (PRAs). This volume is the tutorial manual for the SAPHIRE system. In this document, a series of lessons are provided that guide the user through basic steps common to most analyses preformed with SAPHIRE. The tutorial is divided into two major sections covering both basic and advanced features. The section covering basic topics contains lessons that lead the reader through development of a probabilistic hypothetical problem involving a vehicle accident, highlighting the program’smore » most fundamental features. The advanced features section contains additional lessons that expand on fundamental analysis features of SAPHIRE and provide insights into more complex analysis techniques. Together, these two elements provide an overview into the operation and capabilities of the SAPHIRE software.« less

  17. Preliminary topical report on comparison reactor disassembly calculations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McLaughlin, T.P.

    1975-11-01

    Preliminary results of comparison disassembly calculations for a representative LMFBR model (2100-l voided core) and arbitrary accident conditions are described. The analytical methods employed were the computer programs: FX2- POOL, PAD, and VENUS-II. The calculated fission energy depositions are in good agreement, as are measures of the destructive potential of the excursions, kinetic energy, and work. However, in some cases the resulting fuel temperatures are substantially divergent. Differences in the fission energy deposition appear to be attributable to residual inconsistencies in specifying the comparison cases. In contrast, temperature discrepancies probably stem from basic differences in the energy partition models inherentmore » in the codes. Although explanations of the discrepancies are being pursued, the preliminary results indicate that all three computational methods provide a consistent, global characterization of the contrived disassembly accident. (auth)« less

  18. A passively-safe fusion reactor blanket with helium coolant and steel structure

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Crosswait, Kenneth Mitchell

    1994-04-01

    Helium is attractive for use as a fusion blanket coolant for a number of reasons. It is neutronically and chemically inert, nonmagnetic, and will not change phase during any off-normal or accident condition. A significant disadvantage of helium, however, is its low density and volumetric heat capacity. This disadvantage manifests itself most clearly during undercooling accident conditions such as a loss of coolant accident (LOCA) or a loss of flow accident (LOFA). This thesis describes a new helium-cooled tritium breeding blanket concept which performs significantly better during such accidents than current designs. The proposed blanket uses reduced-activation ferritic steel asmore » a structural material and is designed for neutron wall loads exceeding 4 MW/m{sup 2}. The proposed geometry is based on the nested-shell concept developed by Wong, but some novel features are used to reduce the severity of the first wall temperature excursion. These features include the following: (1) A ``beryllium-joint`` concept is introduced, which allows solid beryllium slabs to be used as a thermal conduction path from the first wall to the cooler portions of the blanket. The joint concept allows for significant swelling of the beryllium (10 percent or more) without developing large stresses in the blanket structure. (2) Natural circulation of the coolant in the water-cooled shield is used to maintain shield temperatures below 100 degrees C, thus maintaining a heat sink close to the blanket during the accident. This ensures the long-term passive safety of the blanket.« less

  19. Report on audit of the Department of Energy`s Transportation Accident Resistant Container Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-10-11

    The U.S. Department of Energy (Department) has ultimate responsibility for the safety of all nuclear explosives and weapons operations conducted by the Department and its contractors. The Department also has joint responsibility for the safety of nuclear weapons in the custody of the Armed Services. Since the 1970s, the Department has designed, developed, and produced accident resistant containers to promote safety when transporting certain types of nuclear weapons by air. After successfully developing and modifying accident resistant containers for use on Army helicopters, the Department subsequently designed, modified, and produced similar containers for the United States Air Force. Because themore » Department spent millions of dollars on this project, we conducted the audit to determine if the Department had adequate controls in place to preclude the development and production of projects which did not have customer agreement or meet customer requirements. One goal of the Department`s Strategic Plan is to ensure that customer expectations are met by having them participate in the planning process. Although nuclear safety responsibility was shared with the Department of Defense, the Department designed and produced 87 accident resistant containers for about $29 million when the customer did not want them and expressed no desire to use these containers. This occurred because the Department unilaterally decided to produce containers without ensuring that the containers met customer expectations. There may be circumstances where the Department will do some preliminary design and testing before agreeing with the Department of Defense on requirements. However, the Departments of Energy and Defense should reach agreement on the requirement for products before final design and production, otherwise funds will be spent unnecessarily.« less

  20. Virtual Reality Exposure Therapy for PTSD Symptoms after a Road Accident: An Uncontrolled Case Series

    ERIC Educational Resources Information Center

    Beck, J. Gayle; Palyo, Sarah A.; Winer, Eliot H.; Schwagler, Brad E.; Ang, Eu Jin

    2007-01-01

    This report examined whether Virtual Reality Exposure Therapy (VRET) could be used in the treatment of posttraumatic stress disorder (PTSD) symptoms in the aftermath of a serious motor vehicle accident. Six individuals reporting either full or severe subsyndromal PTSD completed 10 sessions of VRET, which was conducted using software designed to…

  1. [Analysis and evaluation of occupational accidents in dancers of the dance theatre].

    PubMed

    Wanke, E M; Groneberg, D A; Quarcoo, D

    2011-03-01

    The dance theatre is an autonomous form of presentation within the performing arts. It is a combination of dance, drama, singing and speaking. As the actors are usually professional dancers the dance theatre is associated with the professional dance. Compared with other dance styles there is an enhanced usage of props, costumes or décor to intensify the production and the expressiveness. In contrast to the defined professional dance technique the range of movements is unlimited. There has not yet been done any research on the influence of props as well as décor in terms of exogenous factors potentially favouring injuries. Aim of this study is to characterize specific injury patterns, as well as their causes and to suggest basic approaches to prevent injuries in the dance theatre. The data of this evaluation comprise occupational accident reports, accident reports of various Berlin theatres as well as case records of all Berlin State Theatres (n = 1106) of the Berlin State Accident Insurance over a 9-year period. 103 occupational accidents are accounted for the dance theatre. 44.6 % of the accidents happen during rehearsals, 42.4 % during performances, 76.7 % on stage and adjoining areas and 10.7 % in the ballet studio. Second most common movement resulting in an injury are jumps with 25.4 %. Altogether 69.7 % of the accidents have a uniquely defined exogenous cause with 30.5 % by props, 12.7 % by the floor and 17.2 % by the dance partner. 30.3 % of the accidents have multifactorial causes (e. g. the social situation, state of training and nutrition). 61 % of all accidents happen within three hours after starting work with an increase of occupational accidents between 11:00 - 12:00 hrs and 08:00- 09:00 hrs. The lower extremity is the most affected location (53.3 %), followed by the head/neck area (21.4 %) and the upper extremity (17.5 %). Contusions (26.2 %), distortions (17.5 %), muscular strains (19.4 %) and wounds (13.6 %) are the most frequent types of injuries. In combination with the partly undefined movement pattern the majority of the acute injuries is - compared to other dance styles - above all caused by susceptible exogenous factors. Corrections of the daily routine, the working conditions, state of training as well as of the state of nutrition of the dancers may be initial steps towards injury prevention. At that, early interactions and interventions in the planning process of a dance theatre production could help to minimize the amount of accidents caused by exogenous factors and contribute to a practicable injury prevention in the dance theatre. © Georg Thieme Verlag KG Stuttgart · New York.

  2. Managing Errors to Reduce Accidents in High Consequence Networked Information Systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ganter, J.H.

    1999-02-01

    Computers have always helped to amplify and propagate errors made by people. The emergence of Networked Information Systems (NISs), which allow people and systems to quickly interact worldwide, has made understanding and minimizing human error more critical. This paper applies concepts from system safety to analyze how hazards (from hackers to power disruptions) penetrate NIS defenses (e.g., firewalls and operating systems) to cause accidents. Such events usually result from both active, easily identified failures and more subtle latent conditions that have resided in the system for long periods. Both active failures and latent conditions result from human errors. We classifymore » these into several types (slips, lapses, mistakes, etc.) and provide NIS examples of how they occur. Next we examine error minimization throughout the NIS lifecycle, from design through operation to reengineering. At each stage, steps can be taken to minimize the occurrence and effects of human errors. These include defensive design philosophies, architectural patterns to guide developers, and collaborative design that incorporates operational experiences and surprises into design efforts. We conclude by looking at three aspects of NISs that will cause continuing challenges in error and accident management: immaturity of the industry, limited risk perception, and resource tradeoffs.« less

  3. PRELIMINARY EVALUATION OF FeCrAl CLADDING AND U-Si FUEL FOR ACCIDENT TOLERANT FUEL CONCEPTS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hales, J. D.; Gamble, K. A.

    2015-09-01

    Since the accident at the Fukushima Daiichi Nuclear Power Station, enhancing the accident tolerance of light water reactors (LWRs) has become an important research topic. In particular, the community is actively developing enhanced fuels and cladding for LWRs to improve safety in the event of accidents in the reactor or spent fuel pools. Fuels with enhanced accident tolerance are those that, in comparison with the standard UO2-zirconium alloy system, can tolerate loss of active cooling in the reactor core for a considerably longer time period during design-basis and beyond design-basis events while maintaining or improving the fuel performance during normalmore » operations and operational transients. This paper presents early work in developing thermal and mechanical models for two materials that may have promise: U-Si for fuel, and FeCrAl for cladding. These materials would not necessarily be used together in the same fuel system, but individually have promising characteristics. BISON, the finite element-based fuel performance code in development at Idaho National Laboratory, was used to compare results from normal operation conditions with Zr-4/UO2 behavior. In addition, sensitivity studies are presented for evaluating the relative importance of material parameters such as ductility and thermal conductivity in FeCrAl and U-Si in order to provide guidance on future experiments for these materials.« less

  4. Maximal design basis accident of fusion neutron source DEMO-TIN

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kolbasov, B. N., E-mail: Kolbasov-BN@nrcki.ru

    2015-12-15

    When analyzing the safety of nuclear (including fusion) facilities, the maximal design basis accident at which the largest release of activity is expected must certainly be considered. Such an accident is usually the failure of cooling systems of the most thermally stressed components of a reactor (for a fusion facility, it is the divertor or the first wall). The analysis of safety of the ITER reactor and fusion power facilities (including hybrid fission–fusion facilities) shows that the initial event of such a design basis accident is a large-scale break of a pipe in the cooling system of divertor or themore » first wall outside the vacuum vessel of the facility. The greatest concern is caused by the possibility of hydrogen formation and the inrush of air into the vacuum chamber (VC) with the formation of a detonating mixture and a subsequent detonation explosion. To prevent such an explosion, the emergency forced termination of the fusion reaction, the mounting of shutoff valves in the cooling systems of the divertor and the first wall or blanket for reducing to a minimum the amount of water and air rushing into the VC, the injection of nitrogen or inert gas into the VC for decreasing the hydrogen and oxygen concentration, and other measures are recommended. Owing to a continuous feed-out of the molten-salt fuel mixture from the DEMO-TIN blanket with the removal period of 10 days, the radioactivity release at the accident will mainly be determined by tritium (up to 360 PBq). The activity of fission products in the facility will be up to 50 PBq.« less

  5. Does facing traffic improve pedestrian safety?

    PubMed

    Luoma, Juha; Peltola, Harri

    2013-01-01

    This study was designed to evaluate the potential safety importance of the walking direction along a road by examining pedestrian accidents as a function of exposure to risk. The study was limited to rural two-lane roads with no pavement or pedestrian lane. The accident data included police-reported road accidents from Finland between 2006 and 2010 in which a motorized vehicle had struck a pedestrian walking along the road. There were 18 accidents involving a fatally injured pedestrian and 87 accidents involving a non-fatally injured pedestrian. The exposure data collected from the roughly 3400km included 258 pedestrians. The main finding was that the mean effect of facing traffic compared to walking with traffic was a 77% decrease in fatal and in non-fatal injury pedestrian accidents. The results further showed that the effects were greater for main roads than for secondary roads. The main implication of this study is that information about the importance of facing traffic should be reinforced with specific information about its substantial safety benefits. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Necessity and Contention of Education on Engineer Ethics

    NASA Astrophysics Data System (ADS)

    Takeda, Kunihiko; Ishikawa, Tomoyuki

    Using examples of major accidents caused by technical technology are effective when teaching engineering ethics in undergraduate courses because almost all students have had no actual experience in technical problems or accidents in their lives. The typical accidents that have been selected in the past for this purpose by lecturers are limited in Japanese colleges or in textbooks. Some examples are the Minamata disease, the Kanemi oil PCB contamination, the space shuttle “Challenger” accident, the Ford “Pinto” design problem, Mitsubishi Motor's scandal and the unclear power plant accident at Tokai. However, it is difficult to decide whether or not these typical accidents are suitable for the teaching of engineering ethics. The responsibility of an engineer in Japan is strictly limited because he has no authority to finally decide upon the problem of ethics even if the item is purely technical and he is the best person to make the decision. The reason is discussed focusing on 1) the concept of the “profession” of medical doctors and engineers and 2) the relationships between the treatment, position, honor and responsibility of engineers in Japanese society.

  7. Risk of accidents in drivers with epilepsy.

    PubMed Central

    Taylor, J; Chadwick, D; Johnson, T

    1996-01-01

    OBJECTIVE--To estimate the risks of road traffic accidents over a period of three years in drivers with a history of single seizures or epilepsy, and to compare them with a cohort of drivers followed up by the Transport Research Laboratory (TRL). DESIGN--A retrospective survey of driving and accident experience by self-completion questionnaire. SUBJECTS--16,958 drivers with a previous history of epilepsy responding to the survey and 8888 non-epileptic drivers responding to a TRL survey. MAIN OUTCOME MEASURES--The risk of any accident, any accident producing an injury, and any accident producing a serious injury, over a three year period. RESULTS--After adjustment for differences in age, sex, driving experience, and mileage between the two populations there was no evidence of any overall increase in risk of accidents in the population of drivers with a history of epilepsy. However, there was evidence of an increased risk of more severe accidents in the population with epilepsy. The risk was increased by about 40% for serious injuries and there was evidence of a twofold risk of increase in non-driver fatalities. These increases seem largely explicable by the occurrence of seizures in this population during the three years of driving that the survey covered. CONCLUSIONS--The acceptability of driving for people with a history of epilepsy should be determined by an acceptable risk of accidents resulting in injury or serious injury rather than overall accident rates. As people with epilepsy can now drive after a 12 month seizure free period rather than the required two year period when this survey was undertaken, it is important to ascertain whether there is any increased risk of injury associated accidents with this policy. PMID:8648327

  8. Females do not have more injury road accidents on Friday the 13th

    PubMed Central

    Radun, Igor; Summala, Heikki

    2004-01-01

    Background This study reinvestigated the recent finding that females – but not males – die in traffic accidents on Friday the 13th more often than on other Fridays (Näyhä S: Traffic deaths and superstition on Friday the 13th. Am J Psychiatry 2002, 159: 2110–2111). The current study used matched setting and injury accident data base that is more numerous than fatality data. If such an effect would be caused by impaired psychic and psychomotor functioning due to more frequent anxiety among women, it should also appear in injury crashes. Methods We used the national Finnish road accident database for 1989–2002. To control seasonal variation, 21 Fridays the 13th were compared in a matched design to previous and following Fridays, excluding all holidays, on number of accidents, male/female responsibility for accidents, and the number of dead, injured and overall number of active participants (drivers, pedestrians and bicyclists) as a consequence of the accident. Results There were no significant differences in any examined aspect of road injury accidents among the three Fridays, either in females or males. Women were not overrepresented in crashes that occurred on Fridays 13th. Conclusion There is no consistent evidence for females having more road traffic crashes on Fridays the 13th, based on deaths or road accident statistics. However, this does not imply a non-existent effect of superstition related anxiety on accident risk as no exposure-to-risk data are available. People who are anxious of "Black Friday" may stay home, or at least avoid driving a car. PMID:15546493

  9. [The incidence of accidents at work among paramedics in the years 2001-2013 based on the register of one selected hospital].

    PubMed

    Garus-Pakowska, Anna; Gaszyńska, Ewelina; Szatko, Franciszek

    Paramedics are exposed to a number of factors that may have a direct or indirect impact on the risk of an accident at work. The aim of the study was to analyze the incidence of accidents at work among paramedics as well as to discuss risk factors and measures to prevent such cases. The data on accidents at work were obtained from unpublished internal hospital documentation. The results were subjected to statistical analysis. In the years 2001-2013 there were 40 events, including 6 collective accidents, in which 41 paramedics of the emergency department were injured. On average, around 3 accidents involving paramedics occurred each year. The accidents happened most frequently in the evening and at night and in the winter months (statistically insignificant relationship). Incorrect behavior of the paramedics was the most common cause of an accident (75.6%) and musculoskeletal injuries (75%) most frequently of upper and lower limbs (55%) were the most common effects of an accident. In none of the cases safety regulations were breached by employees or employer. Accidents among paramedics can be prevented by changing the interior design of and the medical equipment installation in the rear cabin of the ambulance, conducting regular training to upgrade the skills of paramedics and enriching their knowledge about health and safety in their widest meaning. Med Pr 2016;67(2):213-221. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  10. Tenth Warren K. Sinclair keynote address-the Fukushima nuclear power plant accident and comprehensive health risk management.

    PubMed

    Yamashita, Shunichi

    2014-02-01

    Just two years have passed since the Tokyo Electric Power Company-Fukushima Daiichi Nuclear Power Plant (NPP) accident, a multidimensional disaster that combined to destroy the local infrastructure on which the safety system depended and gave a serious impact to the world. Countermeasures including evacuation, sheltering, and control of the food chain were implemented in a timely manner by the Japanese government. However, there is a clear need for improvement, especially in the areas of nuclear safety and protection and also in the management of the radiation health risk during and even after the accident. To date there have been no acute radiation injuries. The radiation-related physical health consequences to the general public, including evacuees, are likely to be much lower than those arising from the Chernobyl nuclear reactor accident, because the radiation fallout and the subsequent environmental contamination were much more limited. However, the social, psychological, and economic impacts of the Fukushima NPP accident are expected to be considerable. Currently, continued monitoring and characterization of the levels of radioactivity in the environment and foods in Fukushima are vital for obtaining informed consent to the decisions on living in the areas already radiocontaminated and returning back to the evacuated areas once re-entry is permitted; it is also important to perform a realistic assessment of the radiation doses on the basis of measurements. We are currently implementing the official plans of the Fukushima Health Management Survey, which includes a basic survey for the estimation of the external doses that were received during the first 4 mo after the accident and four more detailed surveys (thyroid ultrasound examination, comprehensive health check-up, mental health and life-style survey, and survey of pregnant women and nursing mothers), with the aim to take care of the health of all of the residents of the Fukushima Prefecture for a long time. Introduction of the Sinclair Lecture (Video 2:01, http://links.lww.com/HP/A24).

  11. Evaluation on Bending Properties of Biomaterial GUM Metal Meshed Plates for Bone Graft Applications

    NASA Astrophysics Data System (ADS)

    Suzuki, Hiromichi; He, Jianmei

    2017-11-01

    There are three bone graft methods for bone defects caused by diseases such as cancer and accident injuries: Autogenous bone grafts, Allografts and Artificial bone grafts. In this study, meshed GUM Metal plates with lower elasticity, high strength and high biocompatibility are introduced to solve the over stiffness & weight problems of ready-used metal implants. Basic mesh shapes are designed and applied to GUM Metal plates using 3D CAD modeling tools. Bending properties of prototype meshed GUM Metal plates are evaluated experimentally and analytically. Meshed plate specimens with 180°, 120° and 60° axis-symmetrical types were fabricated for 3-point bending tests. The pseudo bending elastic moduli of meshed plate specimens obtained from 3-point bending test are ranged from 4.22 GPa to 16.07 GPa, within the elasticity range of natural cortical bones from 2.0 GPa to 30.0 GPa. Analytical approach method is validated by comparison with experimental and analytical results for evaluation on bending property of meshed plates.

  12. The Design of PSB-VVER Experiments Relevant to Accident Management

    NASA Astrophysics Data System (ADS)

    Nevo, Alessandro Del; D'Auria, Francesco; Mazzini, Marino; Bykov, Michael; Elkin, Ilya V.; Suslov, Alexander

    Experimental programs carried-out in integral test facilities are relevant for validating the best estimate thermal-hydraulic codes(1), which are used for accident analyses, design of accident management procedures, licensing of nuclear power plants, etc. The validation process, in fact, is based on well designed experiments. It consists in the comparison of the measured and calculated parameters and the determination whether a computer code has an adequate capability in predicting the major phenomena expected to occur in the course of transient and/or accidents. University of Pisa was responsible of the numerical design of the 12 experiments executed in PSB-VVER facility (2), operated at Electrogorsk Research and Engineering Center (Russia), in the framework of the TACIS 2.03/97 Contract 3.03.03 Part A, EC financed (3). The paper describes the methodology adopted at University of Pisa, starting form the scenarios foreseen in the final test matrix until the execution of the experiments. This process considers three key topics: a) the scaling issue and the simulation, with unavoidable distortions, of the expected performance of the reference nuclear power plants; b) the code assessment process involving the identification of phenomena challenging the code models; c) the features of the concerned integral test facility (scaling limitations, control logics, data acquisition system, instrumentation, etc.). The activities performed in this respect are discussed, and emphasis is also given to the relevance of the thermal losses to the environment. This issue affects particularly the small scaled facilities and has relevance on the scaling approach related to the power and volume of the facility.

  13. Influence Map Methodology for Evaluating Systemic Safety Issues

    NASA Technical Reports Server (NTRS)

    2008-01-01

    "Raising the bar" in safety performance is a critical challenge for many organizations, including Kennedy Space Center. Contributing-factor taxonomies organize information about the reasons accidents occur and therefore are essential elements of accident investigations and safety reporting systems. Organizations must balance efforts to identify causes of specific accidents with efforts to evaluate systemic safety issues in order to become more proactive about improving safety. This project successfully addressed the following two problems: (1) methods and metrics to support the design of effective taxonomies are limited and (2) influence relationships among contributing factors are not explicitly modeled within a taxonomy.

  14. The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cinbiz, Mahmut N; Brown, Nicholas R; Terrani, Kurt A

    2017-01-01

    This study investigates the failure mechanisms of advanced nuclear fuel cladding of FeCrAl at high-strain rates, similar to design basis reactivity initiated accidents (RIA). During RIA, the nuclear fuel cladding was subjected to the plane-strain to equibiaxial tension strain states. To achieve those accident conditions, the samples were deformed by the expansion of high strength Inconel alloy tube under pre-specified pressure pulses as occurring RIA. The mechanical response of the advanced claddings was compared to that of hydrided zirconium-based nuclear fuel cladding alloy. The hoop strain evolution during pressure pulses were collected in situ; the permanent diametral strains of bothmore » accident tolerant fuel (ATF) claddings and the current nuclear fuel alloys were determined after rupture.« less

  15. Validation of the CALSPAN gross-motion-simulation code with actually occurring injury patterns in aircraft accidents.

    PubMed

    Ballo, J M; Dunne, M J; McMeekin, R R

    1978-01-01

    Digital simulation of aircraft-accident kinematics has heretofore been used almost exclusively as a design tool to explore structural load limits, precalculate decelerative forces at various cabin stations, and describe the effect of protective devices in the crash environment. In an effort to determine the value of digital computer simulation of fatal aircraft accidents, a fatality involving an ejection-system failure (out-of-envelope ejection) was modeled, and the injuries actually incurred were compared to those predicted; good agreement was found. The simulation of fatal aircraft accidents is advantageous because of a well-defined endpoint (death), lack of therapeutic intervention, and a static anatomic situation that can be minutely investigated. Such simulation techniques are a useful tool in the study of experimental trauma.

  16. Evaluating Risk Perception based on Gender Differences for Mountaineering Activity

    NASA Astrophysics Data System (ADS)

    Susanto, Novie; Susatyo, Nugroho W. P.; Rizkiyah, Ega

    2018-02-01

    In average 26 death events in mountaineering per year for the time span from 2003 to 2012 is reported. The number of women dying during the mountaineering is significantly smaller than males (3.5 deaths male for one female death). This study aims to analyze the differences of risk perception based on gender and provide recommendations as education basic to prevent accidents in mountaineering. This study utilizes the Kruskal-Wallis test and the Delphi Method. A total of 200 mountaineer respondents (100 males and 100 females) participated in this study. The independent variable in this study was gender. The dependent variable was risk perception including perception toward the serious accident, perception toward the probability of accident event as well as anxiety level and perception of efficacy and self-efficacy. The study result showed that the risk perception of women is higher than men with significant difference (p-value = 0.019). The recommendations from Delphi method result are by developing a positive mental attitude, showing about the risks that exist in nature, implementing Cognitive Behaviour Therapy (CBT) to raise awareness of the safety of ownself, following the climbing or mountaineer school, and using instructors to give lessons about safety in outdoor activities.

  17. Modelling road accident blackspots data with the discrete generalized Pareto distribution.

    PubMed

    Prieto, Faustino; Gómez-Déniz, Emilio; Sarabia, José María

    2014-10-01

    This study shows how road traffic networks events, in particular road accidents on blackspots, can be modelled with simple probabilistic distributions. We considered the number of crashes and the number of fatalities on Spanish blackspots in the period 2003-2007, from Spanish General Directorate of Traffic (DGT). We modelled those datasets, respectively, with the discrete generalized Pareto distribution (a discrete parametric model with three parameters) and with the discrete Lomax distribution (a discrete parametric model with two parameters, and particular case of the previous model). For that, we analyzed the basic properties of both parametric models: cumulative distribution, survival, probability mass, quantile and hazard functions, genesis and rth-order moments; applied two estimation methods of their parameters: the μ and (μ+1) frequency method and the maximum likelihood method; used two goodness-of-fit tests: Chi-square test and discrete Kolmogorov-Smirnov test based on bootstrap resampling; and compared them with the classical negative binomial distribution in terms of absolute probabilities and in models including covariates. We found that those probabilistic models can be useful to describe the road accident blackspots datasets analyzed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. A comprehensive risk assessment framework for offsite transportation of inflammable hazardous waste.

    PubMed

    Das, Arup; Gupta, A K; Mazumder, T N

    2012-08-15

    A framework for risk assessment due to offsite transportation of hazardous wastes is designed based on the type of event that can be triggered from an accident of a hazardous waste carrier. The objective of this study is to design a framework for computing the risk to population associated with offsite transportation of inflammable and volatile wastes. The framework is based on traditional definition of risk and is designed for conditions where accident databases are not available. The probability based variable in risk assessment framework is substituted by a composite accident index proposed in this study. The framework computes the impacts due to a volatile cloud explosion based on TNO Multi-energy model. The methodology also estimates the vulnerable population in terms of disability adjusted life years (DALY) which takes into consideration the demographic profile of the population and the degree of injury on mortality and morbidity sustained. The methodology is illustrated using a case study of a pharmaceutical industry in the Kolkata metropolitan area. Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Aviation occupant survival factors: an empirical study of the SQ006 accident.

    PubMed

    Chang, Yu-Hern; Yang, Hui-Hua

    2010-03-01

    We present an empirical study of Singapore Airline (SIA) flight SQ006 to illustrate the critical factors that influence airplane occupant survivability. The Fuzzy Delphi Method was used to identify and rank the survival factors that may reduce injury and fatality in potentially survivable accidents. This is the first attempt by a group from both the public and private sectors in Taiwan to focus on cabin-safety issues related to survival factors. We designed a comprehensive survey based on our discussions with aviation safety experts. We next designed an array of important cabin-safety dimensions and then investigated and selected the critical survival factors for each dimension. Our findings reveal important cabin safety and survivability information that should provide a valuable reference for developing and evaluating aviation safety programs. We also believe that the results will be practical for designing cabin-safety education material for air travelers. Finally, the major contribution of this research is that it has identified 47 critical factors that influence accident survivability; therefore, it may encourage improvements that will promote more successful cabin-safety management. Copyright 2009 Elsevier Ltd. All rights reserved.

  20. Aviation Accidents: CRM to Maintaining the Share of Airlines. Case Study on Accidents Airlines in China

    ERIC Educational Resources Information Center

    Alnuaimi, Qussay A. B.

    2015-01-01

    We present Aviation Cost Risk management (CRM) methodology designed for Airlines Company, who needs to run projects beyond their normal. These airlines are critical to the survival of these organizations, such as the development and performance. The Aviation crisis can have considerable impact upon the value of the firm. Risk managers must focus…

  1. Crew Communication as a Factor in Aviation Accidents

    NASA Technical Reports Server (NTRS)

    Goguen, J. A.; Linde, C.; Murphy, M.

    1984-01-01

    The incidence of air transport accidents caused by problems in crew communication and coordination was investigated. Communication patterns which are most effective in specific situations were determined. Methods to assess the effectiveness of crew communication patterns were developed. The results lead to the development of new methods training crews in effective communication and provide guidelines for the design of aviation procedures and equipment.

  2. Special Study: Inadequate Structural Assembly of Schoolbus Bodies. The Accidents at Decatur and Huntsville, Alabama.

    ERIC Educational Resources Information Center

    National Transportation Safety Board (DOT), Washington, DC. Bureau of Surface Transportation Safety.

    This study reviews some examples of injuries received in two school bus accidents; explains how the design of joints and fastenings in the buses was involved in the injuries and in the structural strength of schoolbuses; and compares schoolbus construction with construction of other types of buses that employ more efficient and complete…

  3. Structural fabrication quality as a factor of industrial facilities safety

    NASA Astrophysics Data System (ADS)

    Tishkov, E. V.; Kardaev, E. M.; Stolbova, S. Yu; Shishova, O. S.

    2018-04-01

    In the conditions of industrial facilities high wear degree, it is very important to ensure the possibility of their safe operation in order to avoid various kinds of accidents and catastrophes. As practice shows, industrial plant collapses can occur suddenly under normal operating conditions. Usually, such accidents can take place at different stages of structures life cycle. One of the reasons for this is the initially low quality of reinforced concrete structures fabrication. The article considers the factors contributing to the collapse of reinforced concrete structures of water purification tanks located on the territory of the Omsk Region. The main surveys results on tank structures after collapse with the use of ultrasonic and physical methods of investigation are presented. On the basis of the obtained data analysis, it was found that the main cause of the accidents was the insufficient load-bearing capacity of typical reinforced concrete structures, caused by defects in their fabrication in the factory conditions because of exceeding the standard displacement from the design position of the working reinforcement. Recommendations are given on the identification of defective structures and the prevention of similar accidents when operating similar tanks at manufacturing plants constructed from standard designs.

  4. Site restoration: Estimation of attributable costs from plutonium-dispersal accidents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chanin, D.I.; Murfin, W.B.

    1996-05-01

    A nuclear weapons accident is an extremely unlikely event due to the extensive care taken in operations. However, under some hypothetical accident conditions, plutonium might be dispersed to the environment. This would result in costs being incurred by the government to remediate the site and compensate for losses. This study is a multi-disciplinary evaluation of the potential scope of the post-accident response that includes technical factors, current and proposed legal requirements and constraints, as well as social/political factors that could influence decision making. The study provides parameters that can be used to assess economic costs for accidents postulated to occurmore » in urban areas, Midwest farmland, Western rangeland, and forest. Per-area remediation costs have been estimated, using industry-standard methods, for both expedited and extended remediation. Expedited remediation costs have been evaluated for highways, airports, and urban areas. Extended remediation costs have been evaluated for all land uses except highways and airports. The inclusion of cost estimates in risk assessments, together with the conventional estimation of doses and health effects, allows a fuller understanding of the post-accident environment. The insights obtained can be used to minimize economic risks by evaluation of operational and design alternatives, and through development of improved capabilities for accident response.« less

  5. Surveys of Food Intake Just after the Nuclear Accident at the Fukushima Daiichi Nuclear Power Station.

    PubMed

    Hirakawa, Sachiko; Yoshizawa, Nobuaki; Murakami, Kana; Takizawa, Mari; Kawai, Masaki; Sato, Osamu; Takagi, Shunji; Suzuki, Gen

    2017-01-01

    As a result of the nuclear accident at the Fukushima Daiichi nuclear power station (FDNPS) after the Great East Japan Earthquake on March 11, 2011, volatile radionuclides including iodine-131 were released into the environment and contaminated open-field vegetables, raw milk, tap water, etc. It is important for the health care of residents to correctly comprehend the level of their exposure to radioactive substances released following the accident. However, an evaluation of the internal exposure doses of residents of Fukushima Prefecture as a result of the ingestion of foods, which is indicated in the report issued by United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR)1 is based on a number of assumptions. For instance, the estimation assumes that foods were ingested as usual, without regard to the places to which residents were evacuated after the accident, the places where food shipment restrictions were imposed, and so forth. The present report aims to improve the accuracy of estimation of the amount of food actually ingested at evacuation areas, in order to reduce as much as possible the level of uncertainty in conventional values estimated directly after the accident, which were in fact values based on conservative assumptions. More concretely, as basic source material to more accurately estimate internal exposure doses from food ingestion, various patterns of evacuation and dietary habits at the time of the accident of the residents of 13 municipalities in Fukushima Prefecture who were evacuated during the period from directly after the accident of March 11, 2011 until the end of March are clarified in this report. From survey results, most of the food that evacuees took immediately after the accident was confirmed to have been sourced from either stockpiles prepared before the accident, or relief supplies from outside of the affected areas. The restriction orders of food supplies such as contaminated vegetables and milk, and tap water intake were implemented within several days after the major release of radionuclides on March 15, 2011. In addition, collapse in supply chains, i.e., damage to distribution facilities, lack of transportation vehicles or electricity, and the closure of retail stores, contributed to a situation where food or supplies contaminated with iodine -131 were not consumed in large quantities in general, even before the food restriction order. Since people consumed tap water and water from other sources before the implementation of restriction orders in affected areas, we surveyed the status of water as a potential route of internal exposure.

  6. Using probabilistic criteria in an assessment of the potential radiological consequences of the decommissioning of a nuclear research reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wallner, Christian; Rall, Anna-Maria; Thummerer, Severin

    In order to assess the risk of radiological consequences of incidents and accidents in nuclear facilities it is important to contemplate their frequency of occurrence. It has to be shown that incidents and accidents occur sufficiently seldom according to their radiological consequences i. e. the occurrence frequency of radiological doses has to be limited. This is even demanded by the German radiation protection ordinance (StrlSchV), which says that in nuclear facilities other than nuclear power plants (NPP) in operation and for decommissioning, the occurrence frequency of incidents and accidents shall be contemplated in order to prove the design of safetymore » measures and safety installations. Based on the ideas of the ICRP64, we developed a risk based assessment concept for nuclear facilities, which fulfils the requirements of the German regulations concerning dose limits in normal operation and design basis accidents. The general use of the concept is dedicated to nuclear facilities other than nuclear power plants (NPP) in operation and for decommissioning, where the regulation of risk assessment is less sophisticated. The concept specifies occurrence frequency limits for radiation exposure dose ranges, i. e. the occurrence frequency of incidents and accidents has to be limited according to their radiological effects. To apply this concept, scenarios of incidents and accidents are grouped in exposition classes according to their resulting potential effective dose to members of the general public. The occurrence frequencies of the incidents and accidents are summarized in each exposition class whereas the sum must not exceed the frequency limits mentioned above. In the following we introduce the application of this concept in the assessment of the potential radiological consequences of the decommissioning of a nuclear research reactor. We carried out this assessment for the licensing process of the decommissioning on behalf of German authorities. (authors)« less

  7. Analysis of Workplace Accidents in Automotive Repair Workshops in Spain.

    PubMed

    López-Arquillos, Antonio; Rubio-Romero, Juan Carlos

    2016-09-01

    To analyze the effects of the factors associated with different types of injury (superficial wounds, dislocations and sprains, bone fractures, concussion and internal injuries, burns scalding and freezing) caused by occupational accidents in automotive repair workshops. Study of a sample consisting of 89,954 industry accidents reported from 2003 to 2008. Odds ratios were calculated with a 95% confidence interval. Belonging to a small company is a risk factor for suffering three of the five types of injury studied. Women are less likely to suffer burns and superficial wounds, and more likely to suffer dislocations or sprains. Foreign workers are more likely to suffer concussion and internal injuries. Health and safety strategies and accident prevention measures should be individualized and adapted to the type of worker most likely to be injured in each type of accident. Occupational health and safety training courses designed according to worker profile, and improving the participation of the workers in small firms creating regional or roving safety representatives would improve working conditions.

  8. Fault tree applications within the safety program of Idaho Nuclear Corporation

    NASA Technical Reports Server (NTRS)

    Vesely, W. E.

    1971-01-01

    Computerized fault tree analyses are used to obtain both qualitative and quantitative information about the safety and reliability of an electrical control system that shuts the reactor down when certain safety criteria are exceeded, in the design of a nuclear plant protection system, and in an investigation of a backup emergency system for reactor shutdown. The fault tree yields the modes by which the system failure or accident will occur, the most critical failure or accident causing areas, detailed failure probabilities, and the response of safety or reliability to design modifications and maintenance schemes.

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dobromir Panayotov; Andrew Grief; Brad J. Merrill

    'Fusion for Energy' (F4E) develops designs and implements the European Test Blanket Systems (TBS) in ITER - Helium-Cooled Lithium-Lead (HCLL) and Helium-Cooled Pebble-Bed (HCPB). Safety demonstration is an essential element for the integration of TBS in ITER and accident analyses are one of its critical segments. A systematic approach to the accident analyses had been acquired under the F4E contract on TBS safety analyses. F4E technical requirements and AMEC and INL efforts resulted in the development of a comprehensive methodology for fusion breeding blanket accident analyses. It addresses the specificity of the breeding blankets design, materials and phenomena and atmore » the same time is consistent with the one already applied to ITER accident analyses. Methodology consists of several phases. At first the reference scenarios are selected on the base of FMEA studies. In the second place elaboration of the accident analyses specifications we use phenomena identification and ranking tables to identify the requirements to be met by the code(s) and TBS models. Thus the limitations of the codes are identified and possible solutions to be built into the models are proposed. These include among others the loose coupling of different codes or code versions in order to simulate multi-fluid flows and phenomena. The code selection and issue of the accident analyses specifications conclude this second step. Furthermore the breeding blanket and ancillary systems models are built on. In this work challenges met and solutions used in the development of both MELCOR and RELAP5 codes models of HCLL and HCPB TBSs will be shared. To continue the developed models are qualified by comparison with finite elements analyses, by code to code comparison and sensitivity studies. Finally, the qualified models are used for the execution of the accident analyses of specific scenario. When possible the methodology phases will be illustrated in the paper by limited number of tables and figures. Description of each phase and its results in detail as well the methodology applications to EU HCLL and HCPB TBSs will be published in separate papers. The developed methodology is applicable to accident analyses of other TBSs to be tested in ITER and as well to DEMO breeding blankets.« less

  10. Cost-effectiveness analysis of telemedical devices for pre-clinical traffic accident emergency rescue in Germany.

    PubMed

    Auerbach, H; Schreyögg, J; Busse, R

    2006-01-01

    The purpose of this study is to assess the cost-effectiveness (net costs per life year gained) of telemedical devices for pre-clinical traffic accident emergency rescue in Germany. Two equipment versions of a telemedical device are compared from a societal perspective with the baseline in Germany, i.e. the non-application of telemedicine in emergency rescues. The analysis is based on retrospective statistical data covering a period of 10 years with discounted costs not adjusted for inflation. Due to the uncertainty of data, certain assumptions and estimates were necessary. The outcome is measured in terms of "life years gained" by reducing therapy-free intervals and improvements in first-aid provided by laypersons. The introduction of the basic equipment version, "Automatic Accident Alert", is associated with net costs per life year gained of euro 247,977 (at baseline assumptions). The full equipment version of the telemedical device would lead to estimated net costs of euro 239,524 per life year gained. Multi-way sensitivity-analysis with best and worst case scenarios suggests that decreasing system costs would disproportionately reduce total costs, and that rapid market penetration would largely increase the system's benefit, while simultaneously reducing costs. The net costs per life year gained in the application of the two versions of the telemedical device for pre-clinical emergency rescue of traffic accidents are estimated as quite high. However, the implementation of the device as part of a larger European co-ordinated initiative is more realistic.

  11. The classification of wind shears from the point of view of aerodynamics and flight mechanics

    NASA Technical Reports Server (NTRS)

    Seidler, Fritz; Hensel, Gunter

    1987-01-01

    A study of international statistical data shows that in about three quarters of all serious accidents which occurred with jet propelled airliners wind shear was either one of the main causes of the accident or represented a major contributory cause. Wind shear related problems are examined. The necessity of a use of different concepts, definitions, and divisions is explained, and the concepts and definitions required for the division of wind and wind shear into different categories is discussed. A description of the context between meteorological and aerodynamics-flight mechanics concepts, definitions, and divisions is also provided. Attention is given to wind and wind components, general characteristics of wind shear and the meteorological terms, the basic types of wind shear for aerodynamics-flight mechanics investigations, special types of wind shear for aerodynamics-flight mechanics investigations, and possibilities regarding a change of the wind component.

  12. Human Reliability and the Cost of Doing Business

    NASA Technical Reports Server (NTRS)

    DeMott, D. L.

    2014-01-01

    Human error cannot be defined unambiguously in advance of it happening, it often becomes an error after the fact. The same action can result in a tragic accident for one situation or a heroic action given a more favorable outcome. People often forget that we employ humans in business and industry for the flexibility and capability to change when needed. In complex systems, operations are driven by their specifications of the system and the system structure. People provide the flexibility to make it work. Human error has been reported as being responsible for 60%-80% of failures, accidents and incidents in high-risk industries. We don't have to accept that all human errors are inevitable. Through the use of some basic techniques, many potential human error events can be addressed. There are actions that can be taken to reduce the risk of human error.

  13. Trend of mortality rate and injury burden of transport accidents, suicides, and falls.

    PubMed

    Kim, Ki Sook; Kim, Soon Duck; Lee, Sang Hee

    2012-01-01

    Recently injury has become a major world-wide health problem. But studies in Korea about injuries were very few. Thus, this study was conducted to analyze the trend of major injuries from 1991 to 2006 and to provide basic data for preventing injuries. This study was based on the National Statistical Office data from 1991 to 2006 and calculated to estimate the burden of major injuries by using the standard expected years of life lost (SEYLL) and total lost earnings equation. For transport accidents, mortality, SEYLL and total lost earnings were increased from 1991 to 1996 and decreased from 2000 to 2006. On the other hand, for suicides, these were increased gradually. Since 2003, falls were included in ten leading causes of death. This study showed that injury causes major social and economical losses. We could reduce injury related premature death through active interest in injury prevention program.

  14. Risk levels for suffering a traffic injury in primary health care. The LESIONAT* project

    PubMed Central

    2010-01-01

    Background Literature shows that not only are traffic injuries due to accidents, but that there is also a correlation between different chronic conditions, the consumption of certain types of drugs, the intake of psychoactive substances and the self perception of risk (Health Belief Model) and the impact/incidence of traffic accidents. There are few studies on these aspects in primary health care. The objectives of our study are: Main aim: To outline the distribution of risk factors associated with Road Traffic Injuries (RTI) in a driving population assigned to a group of primary health care centres in Barcelona province. Secondly, we aim to study the distribution of diverse risk factors related to the possibility of suffering an RTI according to age, sex and population groups, to assess the relationship between these same risk factors and self risk perception for suffering an RTI, and to outline the association between the number of risk factors and the history of reported collisions. Methods/Design Design: Cross-sectional, multicentre study. Setting: 25 urban health care centres. Study population: Randomly selected sample of Spanish/Catalan speakers age 16 or above with a medical register in any of the 25 participating primary health care centres. N = 1540. Unit of study: Basic unit of care, consisting of a general practitioner and a nurse, both of whom caring for the same population (1,500 to 2,000 people per unit). Instruments of measurement: Data collection will be performed using a survey carried out by health professionals, who will use the clinical registers and the information reported by the patient during the visit to collect the baseline data: illnesses, medication intake, alcohol and psychoactive consumption, and self perception of risk. Discussion We expect to obtain a risk profile of the subjects in relation to RTI in the primary health care field, and to create a group for a prospective follow-up. Trial Registration Clinical Trials.gov Identifier: NCT00778440. PMID:20233403

  15. Prevalence of sleep-related accidents among drivers in Saudi Arabia

    PubMed Central

    BaHammam, Ahmad S.; Alkhunizan, Muath A.; Lesloum, Rabea H.; Alshanqiti, Amer M.; Aldakhil, Abdulrahman M.; Pandi-Perumal, Seithikurippu R.; Sharif, Munir M.

    2014-01-01

    INTRODUCTION: The prevalence of sleepy driving and sleep-related accidents (SRA) varies widely, and no data exist regarding the prevalence of sleepy driving in Saudi Arabia. Therefore, this study was designed to determine the prevalence and predictors of sleepy driving, near-misses, and SRA among drivers in Saudi Arabia. MATERIALS AND METHODS: A questionnaire was developed to assess sleep and driving in detail based on previously published data regarding sleepy driving. The questionnaire included 50 questions addressing socio-demographics, the Epworth Sleepiness Scale (ESS), driving items, and the Berlin Questionnaire. In total, 1,219 male drivers in public places were interviewed face-to-face. RESULTS: The included drivers had a mean age of 32.4 ± 11.7 years and displayed a mean ESS score of 7.2 ± 3.8. Among these drivers, 33.1% reported at least one near-miss accident caused by sleepiness. Among those who had actual accidents, 11.6% were attributed to sleepiness. In the past six months, drivers reported the following: 25.2% reported falling asleep at least once during, driving and 20.8% had to stop driving at least once because of severe sleepiness. Young age, feeling very sleepy during driving, and having at least one near-miss accident caused by sleepiness in the past six months were the only predictors of accidents. CONCLUSION: Sleepy driving is prevalent among male drivers in Saudi Arabia. Near-miss accidents caused by sleepiness are an important risk factor for car accidents and should be considered as a strong warning signal of future accidents. PMID:25276244

  16. SL-1 Accident Briefing Report - 1961 Nuclear Reactor Meltdown Educational Documentary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2013-09-25

    U.S. Atomic Energy Commission (Idaho Operations Office) briefing about the SL-1 Nuclear Reactor Meltdown. The SL-1, or Stationary Low-Power Reactor Number One, was a United States Army experimental nuclear power reactor which underwent a steam explosion and meltdown on January 3, 1961, killing its three operators. The direct cause was the improper withdrawal of the central control rod, responsible for absorbing neutrons in the reactor core. The event is the only known fatal reactor accident in the United States. The accident released about 80 curies (3.0 TBq) of Iodine-131, which was not considered significant due to its location in amore » remote desert of Idaho. About 1,100 curies (41 TBq) of fission products were released into the atmosphere. The facility, located at the National Reactor Testing Station approximately 40 miles (64 km) west of Idaho Falls, Idaho, was part of the Army Nuclear Power Program and was known as the Argonne Low Power Reactor (ALPR) during its design and build phase. It was intended to provide electrical power and heat for small, remote military facilities, such as radar sites near the Arctic Circle, and those in the DEW Line. The design power was 3 MW (thermal). Operating power was 200 kW electrical and 400 kW thermal for space heating. In the accident, the core power level reached nearly 20 GW in just four milliseconds, precipitating the reactor accident and steam explosion.« less

  17. SL-1 Accident Briefing Report - 1961 Nuclear Reactor Meltdown Educational Documentary

    ScienceCinema

    None

    2018-01-16

    U.S. Atomic Energy Commission (Idaho Operations Office) briefing about the SL-1 Nuclear Reactor Meltdown. The SL-1, or Stationary Low-Power Reactor Number One, was a United States Army experimental nuclear power reactor which underwent a steam explosion and meltdown on January 3, 1961, killing its three operators. The direct cause was the improper withdrawal of the central control rod, responsible for absorbing neutrons in the reactor core. The event is the only known fatal reactor accident in the United States. The accident released about 80 curies (3.0 TBq) of Iodine-131, which was not considered significant due to its location in a remote desert of Idaho. About 1,100 curies (41 TBq) of fission products were released into the atmosphere. The facility, located at the National Reactor Testing Station approximately 40 miles (64 km) west of Idaho Falls, Idaho, was part of the Army Nuclear Power Program and was known as the Argonne Low Power Reactor (ALPR) during its design and build phase. It was intended to provide electrical power and heat for small, remote military facilities, such as radar sites near the Arctic Circle, and those in the DEW Line. The design power was 3 MW (thermal). Operating power was 200 kW electrical and 400 kW thermal for space heating. In the accident, the core power level reached nearly 20 GW in just four milliseconds, precipitating the reactor accident and steam explosion.

  18. Medical Emergencies in Goa

    PubMed Central

    Saddichha, Sahoo; Saxena, Mukul Kumar

    2010-01-01

    Background: Most emergencies in Goa arise due to road traffic accidents and drowning, which have been compounded by the rise in number of recorded accidents in 2007 to be above 4000. It is believed that 11 people meet with an accident on Goa's roads every day and this is expected to rise by 10% by next year. Similar is the case with drownings and other medical emergencies. We therefore aimed to conduct a cross-sectional survey of medical emergencies and identify various types of emergencies presenting to emergency departments. Materials and Methods: Using a stratified random sampling design, all emergencies presenting to the three government hospitals in Goa, which handle 90% of all emergencies currently, were studied on specially designed data sheets in order to collect data. Emergency medical technicians (ETs) were placed in the Casualty Ward of the medical colleges and they recorded all emergencies on the data sheet. The collected data were then analyzed for stratification and mapping of emergencies. Results: GMC Hospital attended to majority of emergencies (62%), which were mainly of the nature of accidents or assaults (17%) and fever related (17%). Most emergencies were noncritical and about 1% expired. Maximum emergencies also presented from Salcette and Bardez, and occurred among young males in the age group of 19-45 years. Males were also more prone to accidents while females had pregnancies as emergencies. Conclusion: Potential emergency services need to target young males with higher concentrations required in Salcette in South Goa and Bardez in North Goa. PMID:20606921

  19. [Psychological effects of road accidents: a challenge for public health].

    PubMed

    Waszkowska, Małgorzata; Merecz, Dorota

    2006-01-01

    The authors discuss psychological consequences of road accidents and the need for providing support for the victims and their families. The most common psychological effects include mental health problems, increased use of psychotropic drugs, and difficulty in performing occupational functions. Therefore, it is necessary to remodel the system of traffic safety and supplement it with a comprehensive system of support for both direct victims of accidents and their close relatives. To reach this goal, we need to develop optimal conditions for multidisciplinary research to investigate the effects of road accidents in Poland. This would make it possible to design effective psychological treatment and develop an institutional system for relevant support. However, some preventive measures can be taken right now, e.g., early intervention for severely injured victims during their hospital stay or providing support for non-injured victims and their families.

  20. An assessment and validation study of nuclear reactors for low power space applications

    NASA Technical Reports Server (NTRS)

    Klein, A. C.; Gedeon, S. R.; Morey, D. C.

    1987-01-01

    The feasibility and safety of six conceptual small, low power nuclear reactor designs was evaluated. Feasibility evaluations included the determination of sufficient reactivity margins for seven years of full power operation and safe shutdown as well as handling during pre-launch assembly phases. Safety evaluations were concerned with the potential for maintaining subcritical conditions in the event of launch or transportation accidents. These included water immersion accident scenarios both with and without water flooding the core. Results show that most of the concepts can potentially meet the feasibility and safety requirements; however, due to the preliminary nature of the designs considered, more detailed designs will be necessary to enable these concepts to fully meet the safety requirements.

  1. Accident/Mishap Investigation System

    NASA Technical Reports Server (NTRS)

    Keller, Richard; Wolfe, Shawn; Gawdiak, Yuri; Carvalho, Robert; Panontin, Tina; Williams, James; Sturken, Ian

    2007-01-01

    InvestigationOrganizer (IO) is a Web-based collaborative information system that integrates the generic functionality of a database, a document repository, a semantic hypermedia browser, and a rule-based inference system with specialized modeling and visualization functionality to support accident/mishap investigation teams. This accessible, online structure is designed to support investigators by allowing them to make explicit, shared, and meaningful links among evidence, causal models, findings, and recommendations.

  2. Workability of Safety Education and Training for Workers' Strategy in Accident Reduction in Selected Manufacturing Industries in Lagos State

    ERIC Educational Resources Information Center

    Ayodele, Rachael B.; Olubayo-Fatiregun, Martina A.

    2013-01-01

    This study determined the workability of Safety Education and Training for Workers' strategy in reducing accidents. A descriptive survey research design was used. A total of 20 Managerial staff with mean work experience of 13.5 years was selected from 10 manufacturing industries in Lagos State, using intact group method. They were 100% males. Data…

  3. PREVENTION OF FACIAL TRAUMA IN AUTOMOBILE ACCIDENTS

    PubMed Central

    Nahum, Alan

    1963-01-01

    Automobiles do not protect passengers from the forces generated in traffic accidents. Although some compensatory protection can be provided by restraining devices, seat belts are not enough and must be supplemented by upper torso restraints. Cars should be designed with a view to better protection of passengers against injury from striking against hard surfaces or protuberances. ImagesFigure 1.Figure 1.Figure 1. PMID:14084686

  4. Organizational Learning from near Misses, Incidents, Accidents, and Fatalities: A Multiple Case Study of the USA Amusement Industry

    ERIC Educational Resources Information Center

    Wall, Kathleen Horner

    2011-01-01

    Accidents and fatalities at USA amusement parks are rare, yet when they do occur, they can injure, maim, and even kill. This dissertation sheds light on how three family-owned amusement parks learned and improved as organizations from their own and others' failure experience. Using a multiple case study design, 18 participants were interviewed.…

  5. [Model of Analysis and Prevention of Accidents - MAPA: tool for operational health surveillance].

    PubMed

    de Almeida, Ildeberto Muniz; Vilela, Rodolfo Andrade de Gouveia; da Silva, Alessandro José Nunes; Beltran, Sandra Lorena

    2014-12-01

    The analysis of work-related accidents is important for accident surveillance and prevention. Current methods of analysis seek to overcome reductionist views that see these occurrences as simple events explained by operator error. The objective of this paper is to analyze the Model of Analysis and Prevention of Accidents (MAPA) and its use in monitoring interventions, duly highlighting aspects experienced in the use of the tool. The descriptive analytical method was used, introducing the steps of the model. To illustrate contributions and or difficulties, cases where the tool was used in the context of service were selected. MAPA integrates theoretical approaches that have already been tried in studies of accidents by providing useful conceptual support from the data collection stage until conclusion and intervention stages. Besides revealing weaknesses of the traditional approach, it helps identify organizational determinants, such as management failings, system design and safety management involved in the accident. The main challenges lie in the grasp of concepts by users, in exploring organizational aspects upstream in the chain of decisions or at higher levels of the hierarchy, as well as the intervention to change the determinants of these events.

  6. Multiple external hazards compound level 3 PSA methods research of nuclear power plant

    NASA Astrophysics Data System (ADS)

    Wang, Handing; Liang, Xiaoyu; Zhang, Xiaoming; Yang, Jianfeng; Liu, Weidong; Lei, Dina

    2017-01-01

    2011 Fukushima nuclear power plant severe accident was caused by both earthquake and tsunami, which results in large amount of radioactive nuclides release. That accident has caused the radioactive contamination on the surrounding environment. Although this accident probability is extremely small, once such an accident happens that is likely to release a lot of radioactive materials into the environment, and cause radiation contamination. Therefore, studying accidents consequences is important and essential to improve nuclear power plant design and management. Level 3 PSA methods of nuclear power plant can be used to analyze radiological consequences, and quantify risk to the public health effects around nuclear power plants. Based on multiple external hazards compound level 3 PSA methods studies of nuclear power plant, and the description of the multiple external hazards compound level 3 PSA technology roadmap and important technical elements, as well as taking a coastal nuclear power plant as the reference site, we analyzed the impact of off-site consequences of nuclear power plant severe accidents caused by multiple external hazards. At last we discussed the impact of off-site consequences probabilistic risk studies and its applications under multiple external hazards compound conditions, and explained feasibility and reasonableness of emergency plans implementation.

  7. Design and testing of a self-actuated shut down system for the protection of liquid metal fast breeder reactors (LMFBRs)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Josephson, J.; Sowa, E.S.

    1977-04-01

    The design and testing of a simple and reliable Self-Actuated Shutdown System (SASS) for the protection of Liquid Metal Fast Breeder Reactors (LMFBRs) is described. A ferromagnetic Curie temperature permanent magnet holding device has been selected for the design of the Self-Actuated Shutdown System in order to enhance the safety of liquid metal cooled fast reactors (LMFBRs). The self-actuated, self-contained device operates such that accident conditions, resulting in increased coolant temperature or neutron flux reduce the magnetic holding force suspending a neutron absorber above the core by raising the temperature of the trigger mechanism above the Curie point. Neutron absorbermore » material is then inserted into the core, under gravity, terminating the accident. Two possible design variations of the selected concept are presented.« less

  8. History of nuclear technology development in Japan

    NASA Astrophysics Data System (ADS)

    Yamashita, Kiyonobu

    2015-04-01

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  9. History of nuclear technology development in Japan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp; General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195

    2015-04-29

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  10. Is "Safety-in-numbers" theory applies to the pattern of pedestrian accidents in Seoul, South Korea.

    NASA Astrophysics Data System (ADS)

    Choi, Y.; Yoon, H.

    2016-12-01

    Every year, about 1.25 million people die of vehicle-related accidents, among which half are pedestrians with higher vulnerability: pedestrian, cyclists and motorcyclist (World Health Organization, 2016). This urges city governments in the world to strive for pedestrian safety and to apply diverse theories to transportation planning and design. The common belief is that the number of pedestrian accidents is directly and positively associated with the volume of pedestrian, however, another hypothesis, called "safety-in-numbers" effect, tells an opposite story in that accident rates declines with increase of the volume of pedestrian. In this study, we examine first, whether the safety-in-numbers theory applies to the pattern of pedestrian accidents in Seoul, and second, further investigate environmental factors that are associated with the pedestrian safety. On the first count, we use geospatial statistical analyses of the multi-year pedestrian accident data collected by Korea Road Traffic Authority (KoRoad) and the pedestrian volume data collected by SK Telecom (SKT). With Kernel Density Estimation and Bivariate Local Moran's I, we identify spatial clustering of pedestrian accidents in the city, and examine whether those locations match with concentrations of pedestrian volume. On the second count, we use statistical analysis, tobit, poisson and negative binomial regression to investigate relationships between pedestrian volume and number of pedestrian accident for the two types of geographic areas by the results of the aforementioned analysis; Area 1- locations of high volume of pedestrian with high number of accident, Area 2- locations of high volume of pedestrian with low number of accident. For environmental factors potentially explaining pedestrian accidents, we include land use composition, number of traffic lanes, crosswalk presence, pedestrian signal, traffic island and sidewalk width in our analysis. This research will be valuable in city governments' decision making with planning guidelines and political protocols for making safer pedestrian environment.

  11. In-hospital paediatric accidents: an integrative review of the literature.

    PubMed

    Da Rin Della Mora, R; Bagnasco, A; Sasso, L

    2012-12-01

    Paediatric hospitals can be perceived by children, parents, health professionals as 'safe' places, but accidents do occur. To review publications relating to in-hospital paediatric accidents and highlight the state-of-the-science concerning this issue especially in relation to falls, and the evolution of research addressing this issue. Integrative review of papers published before March 2011 on accidents and falls occurred in hospitalized children. Electronic databases (PubMed, Cumulative Index to Nursing and Allied Health Literature and Cochrane Library databases) and further hand searching through references were searched. The inclusion criteria were articles involving observational, quasi-experimental or experimental studies in English or Italian. Exclusion criteria were articles addressing the outcomes of falls caused by suspect violence on children. Thirteen studies in English were included. Of the 13 studies conducted between 1963 and 2010, 10 had been conducted in the last 5 years; 10 in the USA. The studies were divided into two categories: contextualization and prevention of the 'accident' or 'fall' phenomenon (10 studies), and fall risk assessment (three studies). The most frequent type of design was observational explorative/descriptive. Several areas of investigation were explored (hazardous environment, children's characteristics correlated to accidents/falls, characteristics of the accidents/falls and their outcomes, paediatric fall risk factors and risk assessment tools, fall risk prevention programmes, parents' perceptions of accident/fall risks, etc.). No comparable methods were used to investigate the contextualization and prevention of the 'accident' and 'fall' phenomena; proposed fall risk assessment tools were not evaluated for their reliability and validity. Consensus would be needed around the approach to accidents in terms of: the definition of 'accident' and 'fall'; 'fall-related injury' and respective classifications; the frequency and rate calculation methods; the tools used to assess the risk of falls; and evidence-based practice aimed at preventing them. © 2012 The Authors. International Nursing Review © 2012 International Council of Nurses.

  12. [Design and validation of a questionnaire exploring risky-driving patterns in young drivers].

    PubMed

    Jiménez Mejías, Eladio; Luna del Castillo, Juan de Dios; Amezcua Prieto, Carmen; Olvera Porcel, María Carmen; Lardelli Claret, Pablo; Jiménez Moleón, José Juan

    2012-01-01

    Traffic Injuries are a major public health problem, especially among young people. However, we have not found any useful questionnaire designed in our country for the epidemiological research in this field. The objective of this study was to design and validate an easy and quickly-to-fill questionnaire aimed to collect information on how frequently university car drivers report to be involved in driving circumstances theoretically related to traffic crashes. Between 2007 and 2010, a total of 1597 young undergraduate students at the University of Granada answered a self-administered questionnaire collecting information about exposure, accidents and involvement in 28 different driving circumstances. For designing this questionnaire, an extensive literature review was carried out and the opinions of five experts in a panel were also taken into account. By applying the tetracoric correlation coefficient, we conducted a factor analysis. Internal consistency was assessed using Cronbach's alpha coefficient. Finally, we evaluated the crude and adjusted association of each identified factor with the odds for having suffered an accident. After excluding 8 circumstances, the remaining ones were grouped into three factors: the first one included ten high-prevalence circumstances and explained 31.9% of the total variability. Meanwhile, the other two factors included five circumstances each one which respectively explained 15.2% and 12.5% of the variability. Cronbach's alpha coefficients ranged between 0.816 and 0.553. When adjustments according age, sex, years in possession of the driving license and intensity of exposure were made, the first factor obtained the score more strongly associated with the accident rate (OR = 1.51; CI95%: 1.25-1.85). The final version (20 circumstances) identified three factors related to higher accident rates among the young drivers. The first one integrated, among other circumstances, the excessive speed and driving while sleepy or tired and it was the most closely associated with the accident rate in the adjusted analysis. The second factor included, among others, the commission of driving offences, and the third one included driving under the influence of alcohol, not always wearing the seat belt and distractions.

  13. The legacy of war: an epidemiological study of cluster weapon and land mine accidents in Quang Tri Province, Vietnam.

    PubMed

    Phung, Tran Kim; Le, Viet; Husum, Hans

    2012-07-01

    The study examines the epidemiology of cluster weapon and land mine accidents in Quang Tri Province since the end of the Vietnam War. The province is located just south of the demarcation line and was the province most affected during the war. In 2009, a cross sectional household study was conducted in all nine districts of the province. During the study period of 1975-2009, 7,030 persons in the study area were exposed to unexploded ordnances (UXO) or land mine accidents, or 1.1% of the provincial population. There were 2,620 fatalities and 4,410 accident survivors. The study documents that the main problem is cluster weapons and other unexploded ordnances; only 4.3% of casualties were caused by land mines. The legacy of the war affects poor people the most; the accident rate was highest among villagers living in mountainous areas, ethnic minorities, and low-income families. The most common activities leading to the accidents were farming (38.6%), collecting scrap metal (11.2%), and herding of cattle (8.3%). The study documents that the people of the Quang Tri Province until this day have suffered heavily due to the legacy of war. Mine risk education programs should account for the epidemiological findings when future accident prevention programs are designed to target high-risk areas and activities.

  14. [Fatal occupational accidents in Lombardy].

    PubMed

    Pianosi, G

    1995-01-01

    All fatal occupational accidents compensated in Lombardy from 1984 to 1989 were analyzed (1259 cases): significant differences between geographical distribution of fatal occupational accidents and workers were observed. Males accounted for about 95% of fatalities; an excess of cases was shown in both young and elderly workers. Death was the consequence of injuries involving most frequently the head, thorax and spinal cord. An excess of fatalities was observed in agriculture and, at a lower level, in manufacturing industries; small enterprises were involved in approximately 25% of fatalities occurring in the manufacturing industries and services. Employers were the victims of fatal accidents in 50% of cases in agriculture and in 70% of cases in craft industries. Construction, agriculture and transport accounted for about 50% of all fatalities. About 50% of fatal occupational accidents were related to vehicle use: the victim was the driver in the majority of cases, sometimes the victim was run over by a vehicle or fell from a vehicle. The results agree with some previous observations (e.g.: sex and age distribution; construction, agriculture and transport as working activities at high accident risk); but some original observations have emerged, in particular about the frequency of employers as victims and the role of vehicles in the genesis of fatal occupational accidents. If further studies confirm these latter observations, important developments could follow in preventive action design and implementation.

  15. Human Factors in Accidents Involving Remotely Piloted Aircraft

    NASA Technical Reports Server (NTRS)

    Merlin, Peter William

    2013-01-01

    This presentation examines human factors that contribute to RPA mishaps and provides analysis of lessons learned. RPA accident data from U.S. military and government agencies were reviewed and analyzed to identify human factors issues. Common contributors to RPA mishaps fell into several major categories: cognitive factors (pilot workload), physiological factors (fatigue and stress), environmental factors (situational awareness), staffing factors (training and crew coordination), and design factors (human machine interface).

  16. Stochastic resonance training reduces musculoskeletal symptoms in metal manufacturing workers: a controlled preventive intervention study.

    PubMed

    Burger, Christian; Schade, Volker; Lindner, Christina; Radlinger, Lorenz; Elfering, Achim

    2012-01-01

    This study examined the effects of stochastic resonance whole-body vibration training on work-related musculoskeletal symptoms and accidents. Participants were white and blue-collar employees of a Swiss metal manufacturer (N=38), and participation was voluntary. The study was designed as a switching-replications longitudinal trial with randomized group allocation. The randomized controlled cross-over design consisted of two groups each given four weeks of exercise and no intervention during a second four-week period. Outcome was measured on a daily basis with questionnaires. Three components constituted musculoskeletal symptoms: musculoskeletal pain, related function limitations and musculoskeletal well-being. Accidents were assessed by ratings for balance and daily near-accidents. For statistical analysis, a mixed model was calculated. At the end of the training period musculoskeletal pain and related function limitation were significantly reduced, whereas musculoskeletal well-being had significantly increased. For function limitation and musculoskeletal well-being, change over time was linear. There was no effect on balance or near-accidents. Stochastic resonance whole-body vibration was found to be effective in the prevention of work-related musculoskeletal symptoms. It is well suited for the use in a work environment since it requires very little effort in terms of infrastructure, time and investment from participants.

  17. Application of the DG-1199 methodology to the ESBWR and ABWR.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kalinich, Donald A.; Gauntt, Randall O.; Walton, Fotini

    2010-09-01

    Appendix A-5 of Draft Regulatory Guide DG-1199 'Alternative Radiological Source Term for Evaluating Design Basis Accidents at Nuclear Power Reactors' provides guidance - applicable to RADTRAD MSIV leakage models - for scaling containment aerosol concentration to the expected steam dome concentration in order to preserve the simplified use of the Accident Source Term (AST) in assessing containment performance under assumed design basis accident (DBA) conditions. In this study Economic and Safe Boiling Water Reactor (ESBWR) and Advanced Boiling Water Reactor (ABWR) RADTRAD models are developed using the DG-1199, Appendix A-5 guidance. The models were run using RADTRAD v3.03. Low Populationmore » Zone (LPZ), control room (CR), and worst-case 2-hr Exclusion Area Boundary (EAB) doses were calculated and compared to the relevant accident dose criteria in 10 CFR 50.67. For the ESBWR, the dose results were all lower than the MSIV leakage doses calculated by General Electric/Hitachi (GEH) in their licensing technical report. There are no comparable ABWR MSIV leakage doses, however, it should be noted that the ABWR doses are lower than the ESBWR doses. In addition, sensitivity cases were evaluated to ascertain the influence/importance of key input parameters/features of the models.« less

  18. The Development of Improved Risk Assessment Methods for Use in Industrial Environmental Management Systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Manners, T.K.

    2006-07-01

    Industrial sites that store or use chemicals are controlled in the UK under the COMAH (Control Of Major Accident Hazards) Regulations 1999 [1] based on their holdings of 'Dangerous Substances'. The COMAH Regulations [1] came into force in 1999 and are the UK's response to the European Union's Seveso II Directive. The purpose of these Regulations [1] is to: - Identify Major Accident Hazards (MAH); - Ensure that control measures are in place to prevent a MAH; - Ensure that mitigatory measures are in place to limit effects if MAH do occur. The UK's Health and Safety Executive (HSE), andmore » the Environment Agency (EA) jointly enforce the Regulations [1]. The fundamental requirement is given in the statement below, which is taken directly from the Regulations [1]. 'Every operator shall take all measures necessary to prevent major accidents and limit their consequences to persons and the environment'. This paper describes the development of a six-step screening methodology designed to identify Major Accidents To The Environment (MATTE) and improved consequence definitions that can be used in risk matrices to define the severity of an environmental fault. The method has been designed to be compatible with existing Environmental Management Systems (EMS) used in the chemical and nuclear industry. (authors)« less

  19. Automation of experiments at Dubna Gas-Filled Recoil Separator

    NASA Astrophysics Data System (ADS)

    Tsyganov, Yu. S.

    2016-01-01

    Approaches to solving the problems of automation of basic processes in long-term experiments in heavy ion beams of the Dubna Gas-Filled Recoil Separator (DGFRS) facility are considered. Approaches in the field of spectrometry, both of rare α decays of superheavy nuclei and those for constructing monitoring systems to provide accident-free experiment running with highly radioactive targets and recording basic parameters of experiment, are described. The specific features of Double Side Silicon Strip Detectors (DSSSDs) are considered, special attention is paid to the role of boundary effects of neighboring p-n transitions in the "active correlations" method. An example of an off-beam experiment attempting to observe Zeno effect is briefly considered. Basic examples for nuclear reactions of complete fusion at 48Ca ion beams of U-400 cyclotron (LNR, JINR) are given. A scenario of development of the "active correlations" method for the case of very high intensity beams of heavy ions at promising accelerators of LNR, JINR, is presented.

  20. An open simulation approach to identify chances and limitations for vulnerable road user (VRU) active safety.

    PubMed

    Seiniger, Patrick; Bartels, Oliver; Pastor, Claus; Wisch, Marcus

    2013-01-01

    It is commonly agreed that active safety will have a significant impact on reducing accident figures for pedestrians and probably also bicyclists. However, chances and limitations for active safety systems have only been derived based on accident data and the current state of the art, based on proprietary simulation models. The objective of this article is to investigate these chances and limitations by developing an open simulation model. This article introduces a simulation model, incorporating accident kinematics, driving dynamics, driver reaction times, pedestrian dynamics, performance parameters of different autonomous emergency braking (AEB) generations, as well as legal and logical limitations. The level of detail for available pedestrian accident data is limited. Relevant variables, especially timing of the pedestrian appearance and the pedestrian's moving speed, are estimated using assumptions. The model in this article uses the fact that a pedestrian and a vehicle in an accident must have been in the same spot at the same time and defines the impact position as a relevant accident parameter, which is usually available from accident data. The calculations done within the model identify the possible timing available for braking by an AEB system as well as the possible speed reduction for different accident scenarios as well as for different system configurations. The simulation model identifies the lateral impact position of the pedestrian as a significant parameter for system performance, and the system layout is designed to brake when the accident becomes unavoidable by the vehicle driver. Scenarios with a pedestrian running from behind an obstruction are the most demanding scenarios and will very likely never be avoidable for all vehicle speeds due to physical limits. Scenarios with an unobstructed person walking will very likely be treatable for a wide speed range for next generation AEB systems.

  1. Lessons from Fukushima for Improving the Safety of Nuclear Reactors

    NASA Astrophysics Data System (ADS)

    Lyman, Edwin

    2012-02-01

    The March 2011 accident at the Fukushima Daiichi nuclear power plant has revealed serious vulnerabilities in the design, operation and regulation of nuclear power plants. While some aspects of the accident were plant- and site-specific, others have implications that are broadly applicable to the current generation of nuclear plants in operation around the world. Although many of the details of the accident progression and public health consequences are still unclear, there are a number of lessons that can already be drawn. The accident demonstrated the need at nuclear plants for robust, highly reliable backup power sources capable of functioning for many days in the event of a complete loss of primary off-site and on-site electrical power. It highlighted the importance of detailed planning for severe accident management that realistically evaluates the capabilities of personnel to carry out mitigation operations under extremely hazardous conditions. It showed how emergency plans rooted in the assumption that only one reactor at a multi-unit site would be likely to experience a crisis fail miserably in the event of an accident affecting multiple reactor units simultaneously. It revealed that alternate water injection following a severe accident could be needed for weeks or months, generating large volumes of contaminated water that must be contained. And it reinforced the grim lesson of Chernobyl: that a nuclear reactor accident could lead to widespread radioactive contamination with profound implications for public health, the economy and the environment. While many nations have re-examined their policies regarding nuclear power safety in the months following the accident, it remains to be seen to what extent the world will take the lessons of Fukushima seriously and make meaningful changes in time to avert another, and potentially even worse, nuclear catastrophe.

  2. Equipment failures and their contribution to industrial incidents and accidents in the manufacturing industry.

    PubMed

    Bourassa, Dominic; Gauthier, François; Abdul-Nour, Georges

    2016-01-01

    Accidental events in manufacturing industries can be caused by many factors, including work methods, lack of training, equipment design, maintenance and reliability. This study is aimed at determining the contribution of failures of commonly used industrial equipment, such as machines, tools and material handling equipment, to the chain of causality of industrial accidents and incidents. Based on a case study which aimed at the analysis of an existing pulp and paper company's accident database, this paper examines the number, type and gravity of the failures involved in these events and their causes. Results from this study show that equipment failures had a major effect on the number and severity of accidents accounted for in the database: 272 out of 773 accidental events were related to equipment failure, where 13 of them had direct human consequences. Failures that contributed directly or indirectly to these events are analyzed.

  3. [Profiles of resilience and quality of life in people with acquired disability due to traffic accidents].

    PubMed

    Suriá Martínez, Raquel

    2015-09-01

    To identify distinct profiles of resilience in people with spinal cord injuries due to traffic accidents and to determine whether the profiles identified are related to differences in subjective well-being. The Resilience Scale (Wagnild and Young, 1993) and an adapted quality of life scale (GENCAT) were administered to 98 people with physical disabilities due to traffic accidents. Cluster analyses identified three different resilience profiles: a high-resilience group, a low-resilience group, and a group showing a predominance of high scores in self and life acceptance and social competence. The results also revealed statistically significant differences among profiles in most domains of subjective well-being. The results suggest the need to study resilience in greater depth and to design programs to enhance quality of life among people with disabilities due to traffic accidents. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

  4. Relationships of working conditions, health problems and vehicle accidents in bus rapid transit (BRT) drivers.

    PubMed

    Gómez-Ortiz, Viviola; Cendales, Boris; Useche, Sergio; Bocarejo, Juan P

    2018-04-01

    The aim of this study was to estimate accident risk rates and mental health of bus rapid transit (BRT) drivers based on psychosocial risk factors at work leading to increased stress and health problems. A cross-sectional research design utilized a self-report questionnaire completed by 524 BRT drivers. Some working conditions of BRT drivers (lack of social support from supervisors and perceived potential for risk) may partially explain Bogota's BRT drivers' involvement in road accidents. Drivers' mental health problems were associated with higher job strain, less support from co-workers, fewer rewards and greater signal conflict while driving. To prevent bus accidents, supervisory support may need to be increased. To prevent mental health problems, other interventions may be needed such as reducing demands, increasing job control, reducing amount of incoming information, simplifying current signals, making signals less contradictory, and revising rewards. © 2018 Wiley Periodicals, Inc.

  5. Usefulness of high resolution coastal models for operational oil spill forecast: the "Full City" accident

    NASA Astrophysics Data System (ADS)

    Broström, G.; Carrasco, A.; Hole, L. R.; Dick, S.; Janssen, F.; Mattsson, J.; Berger, S.

    2011-11-01

    Oil spill modeling is considered to be an important part of a decision support system (DeSS) for oil spill combatment and is useful for remedial action in case of accidents, as well as for designing the environmental monitoring system that is frequently set up after major accidents. Many accidents take place in coastal areas, implying that low resolution basin scale ocean models are of limited use for predicting the trajectories of an oil spill. In this study, we target the oil spill in connection with the "Full City" accident on the Norwegian south coast and compare operational simulations from three different oil spill models for the area. The result of the analysis is that all models do a satisfactory job. The "standard" operational model for the area is shown to have severe flaws, but by applying ocean forcing data of higher resolution (1.5 km resolution), the model system shows results that compare well with observations. The study also shows that an ensemble of results from the three different models is useful when predicting/analyzing oil spill in coastal areas.

  6. Usefulness of high resolution coastal models for operational oil spill forecast: the Full City accident

    NASA Astrophysics Data System (ADS)

    Broström, G.; Carrasco, A.; Hole, L. R.; Dick, S.; Janssen, F.; Mattsson, J.; Berger, S.

    2011-06-01

    Oil spill modeling is considered to be an important decision support system (DeSS) useful for remedial action in case of accidents, as well as for designing the environmental monitoring system that is frequently set up after major accidents. Many accidents take place in coastal areas implying that low resolution basin scale ocean models is of limited use for predicting the trajectories of an oil spill. In this study, we target the oil spill in connection with the Full City accident on the Norwegian south coast and compare three different oil spill models for the area. The result of the analysis is that all models do a satisfactory job. The "standard" operational model for the area is shown to have severe flaws but including an analysis based on a higher resolution model (1.5 km resolution) for the area the model system show results that compare well with observations. The study also shows that an ensemble using three different models is useful when predicting/analyzing oil spill in coastal areas.

  7. ATF Neutron Irradiation Program Irradiation Vehicle Design Concepts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Geringer, J. W.; Katoh, Yutai; Howard, Richard H.

    The Japan Atomic Energy Agency (JAEA) under the Civil Nuclear Energy Working Group (CNWG) is engaged in a cooperative research effort with the U.S. Department of Energy (DOE) to explore issues related to nuclear energy, including research on accident-tolerant fuels and materials for use in light water reactors. This work develops a draft technical plan for a neutron irradiation program on the candidate accident-tolerant fuel cladding materials and elements using the High Flux Isotope Reactor (HFIR). The research program requires the design of a detailed experiment, development of test vehicles, irradiation of test specimens, possible post irradiation examination and characterizationmore » of irradiated materials and the shipment of irradiated materials to Japan. This report discusses the conceptual design, the development and irradiation of the test vehicles.« less

  8. Nuclear accident at Three Mile Island: its effect on a local community

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Behler, G.T. Jr.

    1987-01-01

    This dissertation consists of a longitudinal case study of the extent to which the structure of community power in Riverside, (a pseudonym) Pennsylvania (the largest community located within five miles of the Three Mile Island nuclear facility) changed as a result of the March, 1979 accident. The investigation centers around testing a basic working hypothesis. Simply stated, this working hypothesis argues that Riverside's power structure has become more pluralistic in response to the Three Mile Island nuclear accident. An additional corollary to this working hypothesis is also tested. This corollary asserts that many of Riverside's community power actors have becomemore » much more cosmopolitan in their political-action tactics and problem-solving orientations as a results of the TMI crisis. The aforementioned working hypothesis and associated corollary are tested via the combined utilization of three different techniques for measuring the distribution of social power. The findings of the study clearly demonstrate the existence of increased pluralism, politicization, and cosmopolitanism within Riverside since March of 1979. Furthermore, these research results, and the entire dissertation itself, contribute to a number of subfields within the discipline of sociology. In particular,contributions are noted for the subfields of community power, social movements, and disaster research.« less

  9. [Dangerous marine animals].

    PubMed

    Antensteiner, G

    1999-01-01

    Sea-biological basic knowledge for divers is offered only in special lessons for advanced scuba divers. According to statistics, however, five per cent of the deadly diving accidents are caused by underwater organisms. This number could be reduced to a fraction, by correct behaviour during the dive and after an accident. The most frequent accidents with sea animals during water sports are not by unprovoked shark attacks, which cause six deaths world-wide per year on the average, but turn out with usually well camouflaged sea inhabitants, that do not attack humans, rather by their inadvertence coincidentally get in contact with it. The various defense instruments of the often small, inconspicuous organisms reach from teeth over poison stings, pricks, spines, scalpelles, nettle injections and chemical weapons up to poison arrows. Due to that variety of the maritime life, the most important representatives of its type are explained including severity level of the caused injury or contamination. Both, diagnostic position and therapy possibility are described as follows: 1. Porifera (sponge), 2. Hydrozoa (white weed, yellow flower head), Actinaria (sea anemones), 3. Conidae (cone shells), Tridocna (giant clam), octopoda (octopus), 4. Acanthaster planci (crown of thorns), Echinodea (sea urchins), Holothurioidea (sea cucumber), 5. Selachoidei (shark), Batoidei (Ray), Muraenidae (moray), Plotosidae (barbel eels), Synanciidae (stonefish), Scorpaenidae (scorpionfish), Pterois (lion fish), Sphyraena Spec. (barracuda), Balistidae (triggerfish), Ostracionidae (puffer).

  10. 10 CFR 50.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to bring and maintain the plant in safe shutdown (non-design basis accident). Applicant means a... Document Control Desk. Nuclear reactor means an apparatus, other than an atomic weapon, designed or used to... from the Restricted Data category pursuant to section 142 of the Act. Safe shutdown (non-design basis...

  11. 10 CFR 50.2 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to bring and maintain the plant in safe shutdown (non-design basis accident). Applicant means a... Document Control Desk. Nuclear reactor means an apparatus, other than an atomic weapon, designed or used to... from the Restricted Data category pursuant to section 142 of the Act. Safe shutdown (non-design basis...

  12. 10 CFR 50.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to bring and maintain the plant in safe shutdown (non-design basis accident). Applicant means a... Document Control Desk. Nuclear reactor means an apparatus, other than an atomic weapon, designed or used to... from the Restricted Data category pursuant to section 142 of the Act. Safe shutdown (non-design basis...

  13. 10 CFR 50.2 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to bring and maintain the plant in safe shutdown (non-design basis accident). Applicant means a... Document Control Desk. Nuclear reactor means an apparatus, other than an atomic weapon, designed or used to... from the Restricted Data category pursuant to section 142 of the Act. Safe shutdown (non-design basis...

  14. 33 CFR 148.725 - What are the design, construction and operational criteria?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... evaluated on the basis of how well they: (a) Reflect the use of best available technology in design... prevention at critical locations identified in the accident analysis; (j) Provide personnel trained in oil...

  15. 33 CFR 148.725 - What are the design, construction and operational criteria?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... evaluated on the basis of how well they: (a) Reflect the use of best available technology in design... prevention at critical locations identified in the accident analysis; (j) Provide personnel trained in oil...

  16. Automation design and crew coordination

    NASA Technical Reports Server (NTRS)

    Segal, Leon D.

    1993-01-01

    Advances in technology have greatly impacted the appearance of the modern aircraft cockpit. Where once one would see rows upon rows. The introduction of automation has greatly altered the demands on the pilots and the dynamics of aircrew task performance. While engineers and designers continue to implement the latest technological innovations in the cockpit - claiming higher reliability and decreased workload - a large percentage of aircraft accidents are still attributed to human error. Rather than being the main instigators of accidents, operators tend to be the inheritors of system defects created by poor design, incorrect installation, faulty maintenance and bad management decisions. This paper looks at some of the variables that need to be considered if we are to eliminate at least one of these inheritances - poor design. Specifically, this paper describes the first part of a comprehensive study aimed at identifying the effects of automation on crew coordination.

  17. Ship cabin leakage alarm based on ARM SCM

    NASA Astrophysics Data System (ADS)

    Qu, Liyan

    2018-03-01

    If there is a leakage in the cabin of a sailing ship, it is a major accident that threatens the personnel and property of the ship. If we can’t take timely measures, there will be a devastating disaster. In order to judge the leakage of the cabin, it is necessary to set up a leakage alarm system, so as to achieve the purpose of detecting and alarming the leakage of the cabin, and avoid the occurrence of accidents. This paper discusses the design of ship cabin leakage alarm system based on ARM SCM. In order to ensure the stability and precision of the product, the hardware design of the alarm system is carried out, such as circuit design, software design, the programming of SCM, the software programming of upper computer, etc. It is hoped that it can be of reference value to interested readers.

  18. Central collecting and evaluating of major accidents and near-miss-events in the Federal Republic of Germany--results, experiences, perspectives.

    PubMed

    Uth, Hans-Joachim; Wiese, Norbert

    2004-07-26

    Lessons learnt from accidents are essential sources for updating state of the art requirements in process safety. To improve this input by a systematic way in the FRG, a central body for collecting and evaluating major accident (ZEMA) was established in 1993. ZEMA is part of the Federal Environmental Agency. All events which are to be notified due to the German Regulation on Major Accidents (Störfall-Verordnung) are centrally collected, analysed (deducing lessons learnt) and documented by ZEMA. The bureau is also responsible for the dissemination of the lessons learnt to all stake holders. This work is done in co-operation with the German Major-Accident Hazard Commission (Störfallkommission) and other international bodies like European MAHB. At the time being, over 375 events from 1980 to 2002 are registered in Germany. For each event, a separate data sheet is published in annual reports, first started in 1993. All information is also available at. A summary evaluation on the events from 1993 to 1999 is presented and some basic lessons learnt are shown. The results from root cause analysis underline the importance of maintenance, detailed knowledge of chemical properties, human factor issues and the role of safety organisation especially connected with subcontractors. The German notification system is described in detail and some experience with the system is reported. Keeping in mind that collecting reports from notified major accidents is only a small amount compared with all the events which might be interesting to learn from, the German Major-Accident Hazard Commission has established a separate body, the subcommittee "Incident Evaluation", which is in charge with collecting and evaluating of minor and near-miss events. Since 1994, a concept for the registration and evaluation of those non-notifiable events was developed. From 2000 on, the concept has been put into operation. Its main elements are; 1. reporting of the incident by the plant operator to an information collecting point of its trust, 2. passing the anonymous report to the "Incident Evaluation" subcommittee, 3. evaluation and classification whether the incident is safety relevant or not and, 4. publishing the relevant information to all interested stake holders, preparing of summary evaluation results in certain areas. Up to now, two brochures on "waste gas pipes" and "obstructions of pipes" were published.

  19. Public Response to a Near-Miss Nuclear Accident Scenario Varying in Causal Attributions and Outcome Uncertainty.

    PubMed

    Cui, Jinshu; Rosoff, Heather; John, Richard S

    2018-05-01

    Many studies have investigated public reactions to nuclear accidents. However, few studies focused on more common events when a serious accident could have happened but did not. This study evaluated public response (emotional, cognitive, and behavioral) over three phases of a near-miss nuclear accident. Simulating a loss-of-coolant accident (LOCA) scenario, we manipulated (1) attribution for the initial cause of the incident (software failure vs. cyber terrorist attack vs. earthquake), (2) attribution for halting the incident (fail-safe system design vs. an intervention by an individual expert vs. a chance coincidence), and (3) level of uncertainty (certain vs. uncertain) about risk of a future radiation leak after the LOCA is halted. A total of 773 respondents were sampled using a 3 × 3 × 2 between-subjects design. Results from both MANCOVA and structural equation modeling (SEM) indicate that respondents experienced more negative affect, perceived more risk, and expressed more avoidance behavioral intention when the near-miss event was initiated by an external attributed source (e.g., earthquake) compared to an internally attributed source (e.g., software failure). Similarly, respondents also indicated greater negative affect, perceived risk, and avoidance behavioral intentions when the future impact of the near-miss incident on people and the environment remained uncertain. Results from SEM analyses also suggested that negative affect predicted risk perception, and both predicted avoidance behavior. Affect, risk perception, and avoidance behavior demonstrated high stability (i.e., reliability) from one phase to the next. © 2017 Society for Risk Analysis.

  20. Simulation of the transient processes of load rejection under different accident conditions in a hydroelectric generating set

    NASA Astrophysics Data System (ADS)

    Guo, W. C.; Yang, J. D.; Chen, J. P.; Peng, Z. Y.; Zhang, Y.; Chen, C. C.

    2016-11-01

    Load rejection test is one of the essential tests that carried out before the hydroelectric generating set is put into operation formally. The test aims at inspecting the rationality of the design of the water diversion and power generation system of hydropower station, reliability of the equipment of generating set and the dynamic characteristics of hydroturbine governing system. Proceeding from different accident conditions of hydroelectric generating set, this paper presents the transient processes of load rejection corresponding to different accident conditions, and elaborates the characteristics of different types of load rejection. Then the numerical simulation method of different types of load rejection is established. An engineering project is calculated to verify the validity of the method. Finally, based on the numerical simulation results, the relationship among the different types of load rejection and their functions on the design of hydropower station and the operation of load rejection test are pointed out. The results indicate that: The load rejection caused by the accident within the hydroelectric generating set is realized by emergency distributing valve, and it is the basis of the optimization for the closing law of guide vane and the calculation of regulation and guarantee. The load rejection caused by the accident outside the hydroelectric generating set is realized by the governor. It is the most efficient measure to inspect the dynamic characteristics of hydro-turbine governing system, and its closure rate of guide vane set in the governor depends on the optimization result in the former type load rejection.

  1. Loss control and its place in the insurance industry.

    PubMed

    Kelly, A B

    1986-08-01

    The historical development of the insurance industry's role in efforts to prevent industrial accidents and occupational disease will be discussed. The various approaches that have evolved include fire insurance, casuality insurance, and compensation for occupational diseases. The basic approach used in insurance programs involved with occupational disease is to identify the toxic material to which employees are exposed, recommend engineering controls to reduce the exposure, and suggest a medical surveillance program. The insurance industry's efforts in industrial hygiene are also described.

  2. Drug Violations and Aviation Accidents: Findings from the U.S. Mandatory Drug Testing Programs

    PubMed Central

    Li, Guohua; Baker, Susan P.; Zhao, Qi; Brady, Joanne E.; Lang, Barbara H.; Rebok, George W.; DiMaggio, Charles

    2012-01-01

    Aims To assess the role of drug violations in aviation accidents. Design Case-control analysis. Setting Commercial aviation in the United States. Participants Aviation employees who were tested for drugs during 1995 through 2005 under the post-accident testing program (cases, n=4,977) or under the random testing program (controls, n=1,129,922). Measurements Point prevalence of drug violations, odds ratio of accident involvement, and attributable risk in the population. A drug violation was defined as a confirmed positive test for marijuana (≥ 50 ng/ml), cocaine (≥ 300 ng/ml), amphetamines (≥1000 ng/ml), opiates (≥ 2000 ng/ml), or phencyclidine (≥ 25 ng/ml). Findings The prevalence of drug violations was 0.64% [95% confidence interval (CI), 0.62–0.65%] in random drug tests and 1.82% (95% CI, 1.47–2.24%) in post-accident tests. The odds of accident involvement for employees who tested positive for drugs was almost three times the odds for those who tested negative (odds ratio 2.90, 95% CI, 2.35–3.57), with an estimated attributable risk of 1.2%. Marijuana accounted for 67.3% of the illicit drugs detected. The proportion of illicit drugs represented by amphetamines increased progressively during the study period, from 3.4% in 1995 to 10.3% in 2005 (p<0.0001). Conclusions Use of illicit drugs by aviation employees is associated with a significantly increased risk of accident involvement. Due to the very low prevalence, drug violations contribute to only a small fraction of aviation accidents. PMID:21306594

  3. Current Status of the Blue Butterfly in Fukushima Research.

    PubMed

    Otaki, Joji M; Taira, Wataru

    2018-02-14

    Adverse biological impacts of the Fukushima nuclear accident have been revealed using the pale grass blue butterfly, Zizeeria maha, since 2012, which were often considered incompatible with the conventional understanding of radiation biology. This discrepancy likely originates from different system conditions and methodologies. In this article, we first respond to comments from the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) regarding our study; "technical errors" in unit usage and mathematical models noted by UNSCEAR are not errors but reflect our research philosophy not to introduce theoretical assumptions associated with unit conversion and mathematical fit. Second, we review our recent studies to support the original 2012 conclusions. Because the high morphological abnormality rate and small body size detected in Fukushima in 2011 have already ceased, likely through adaptive evolution, their present geographical distributions were investigated throughout Japan. Local populations showing relatively high abnormality rates and small body sizes were rare and basically restricted to Miyagi and its northern populations excluding the Fukushima populations, supporting the causal involvement of the accident. Lastly, we stress the importance of understanding the whole picture of the biological impacts of the Fukushima accident. In addition to the direct radiation impacts, indirect impacts through unknown radiation-associated mechanisms, such as immunological responses to insoluble particulate matter and nutritional deficiencies in plants and animals, would be in effect. Further environmental studies beyond conventional radiation biology and physics are necessary to understand the complex responses of organisms, including humans, to the Fukushima nuclear accident. © The American Genetic Association 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Characteristics of young adults of Belarus with post-Chernobyl papillary thyroid carcinoma: a long-term follow-up of patients with early exposure to radiation at the 30th anniversary of the accident.

    PubMed

    Fridman, Mikhail; Lam, Alfred King-Yin; Krasko, Olga

    2016-12-01

    Studies of thyroid cancer related to the Chernobyl accident have focused on children as they are the most vulnerable group with the highest risk of developing radiation-associated cancer. In contrast, our research aimed to look at the clinical and pathological features of patients with post-Chernobyl papillary thyroid carcinoma that were 2 years old or less at the time of the Chernobyl accident. The study subjects were patients (n = 359) aged 0 to 2 at the time of the Chernobyl accident and aged ≥19 years at presentation/surgery who were treated in Belarus for papillary thyroid carcinoma during the period 2003-2013. In conventional or oncocytic variant of papillary thyroid carcinoma, the prevalence of extra-thyroidal extension, nodal disease, infiltrative growth or lymphatic vessel invasion was above 50%. These features were less pronounced when compared to tall cell or diffuse sclerosing variants of papillary thyroid carcinoma. The highest frequency of central lymph node metastases was found in patients aged 1-2 years at exposure (P = 0·004). Subjects exposed in utero were characterized by absent/insignificant lymphocytic infiltration around the carcinoma (P = 0·025), predominance of conventional papillary architecture and an association with lymphocytic thyroiditis. A number of features were associated with this group of patients that were very young at the time of radiation exposure. In addition, the incidence and basic characteristics of adult papillary thyroid carcinoma varied depending on the types of exposure conditions. © 2016 John Wiley & Sons Ltd.

  5. Factors influencing biosafety level and LAI among the staff of medical laboratories.

    PubMed

    Kozajda, Anna; Bródka, Karolina; Szadkowska-Stańczyk, Irena

    2013-01-01

    The aim of the study was to assess the biological risks of medical laboratory employees with particular focus on laboratory acquired infection (LAI), activities having the greatest risk, accidents with biological material, post exposure procedure, preventive measures and workers' knowledge about biological exposure. The study involved 9 laboratories. A questionnaire survey was attended by 123 employees and 9 heads of these units with the use of two questionnaires for laboratory workers and the managers. 32.5% of the respondents (40 persons) had an accident at least once. Needlestick or a broken glass injury covered 18.7% respondents (23 persons), while splashing the skin, mucous membranes or conjunctivae related to 22.8% (28 persons). Among the employees who had an accident, only 45% of the respondents (18 persons) reported this to the manager. Microbes dominant in the biological material were known only to 57 respondents (46.3%), less than half could correctly give an example of a disease (57 persons, 46.3%). More than half of the respondents admitted that they do not know all of the possible routes of infection while working in the laboratory (68 persons, 55.3%). In the study population, a high incidence of accidents was observed, usually during blood sampling and transfer of biological material. Condition of the workers' equipment with personal protective measures and laboratory facilities in devices to reduce the risk of infection and procedures for handling the potentially infectious material should be considered as insufficient. Lack of basic knowledge of the employees about biohazards at workplaces was shown.

  6. Effect of the Road Environment on Road Safety in Poland

    NASA Astrophysics Data System (ADS)

    Budzynski, Marcin; Jamroz, Kazimierz; Antoniuk, Marcin

    2017-10-01

    Run-off-road accidents tend to be very severe because when a vehicle leaves the road, it will often crash into a solid obstacle (tree, pole, supports, front wall of a culvert, barrier). A statistical analysis of the data shows that Poland’s main roadside hazard is trees and the severity of vehicles striking a tree in a run-off-road crash. The risks are particularly high in north-west Poland with many of the roads lined up with trees. Because of the existing rural road cross-sections, i.e. having trees directly on road edge followed immediately by drainage ditches, vulnerable road users are prevented from using shoulders and made to use the roadway. With no legal definition of the road safety zone in Polish regulations, attempts to remove roadside trees lead to major conflicts with environmental stakeholders. This is why a compromise should be sought between the safety of road users and protection of the natural environment and the aesthetics of the road experience. Rather than just cut the trees, other road safety measures should be used where possible to treat the hazardous spots by securing trees and obstacles and through speed management. Accidents that are directly related to the road environment fall into the following categories: hitting a tree, hitting a barrier, hitting a utility pole or sign, vehicle rollover on the shoulder, vehicle rollover on slopes or in ditch. The main consequence of a roadside hazard is not the likelihood of an accident itself but of its severity. Poland’s roadside accident severity is primarily the result of poor design or operation of road infrastructure. This comes as a consequence of a lack of regulations or poorly defined regulations and failure to comply with road safety standards. The new analytical model was designed as a combination of the different factors and one that will serve as a comprehensive model. It was assumed that it will describe the effect of the roadside on the number of accidents and their consequences. The design of the model was based on recommendations from analysing other models. The assumptions were the following: the model will be used to calculate risk factors and accident severity, the indicators will depend on number of vehicle kilometres travelled or traffic volumes, analyses will be based on accident data: striking a tree, hitting a barrier, hitting a utility pole or sign. Additional data will include roadside information and casualty density measures will be used - killed and injured.

  7. High seroprevalence of Toxoplasma gondii infection in a subset of Mexican patients with work accidents and low socioeconomic status.

    PubMed

    Alvarado-Esquivel, Cosme; Torres-Castorena, Alejandro; Liesenfeld, Oliver; Estrada-Martínez, Sergio; Urbina-Álvarez, Jesús D

    2012-01-11

    Toxoplasma gondii has been associated with reflex impairment and traffic accidents. It is unknown whether Toxoplasma infection might be associated with work accidents. Therefore, using a case-control seroprevalence study design, 133 patients with a recent work accident and 266 control subjects of the general population from the same region were examined with enzyme-linked immunoassays for the presence and levels of anti-Toxoplasma IgG antibodies and anti-Toxoplasma IgM antibodies. Socio-demographic, work, clinical and behavioral characteristics from each worker were obtained. Eleven (8.3%) of 133 patients, and 14 (5.3%) of 266 controls had anti-T. gondii IgG antibodies. Anti-T. gondii IgG levels were higher than 150 IU/ml in 8 (6%) patients and 10 (3.8%) controls. Anti-T. gondii IgM antibodies were found in one (0.8%) of the workers, and in 6 (2.3%) of the controls. No statistically significant differences in the IgG seroprevalences, frequencies of high IgG levels, and IgM seroprevalences among patients and controls were found. In contrast, a low socio-economic level in patients with work accidents was associated with Toxoplasma seropositivity (P = 0.01). Patients with work accidents and low socioeconomic status showed a significantly (OR = 3.38; 95% CI: 0.84-16.06; P = 0.04) higher seroprevalence of T. gondii infection than controls of the same socioeconomic status (15.1% vs. 5%, respectively). Multivariate analysis showed a positive association of T. gondii infection with boar meat consumption (OR = 3.04; 95% CI: 1.03-8.94; P = 0.04). In contrast, a negative association between T. gondii infection and national trips (OR = 0.40; 95% CI: 0.17-0.96; P = 0.04), sausage consumption (OR = 0.20; 95% CI: 0.05-0.68; P = 0.01), and ham consumption (OR = 0.16; 95% CI: 0.05-0.51; P = 0.002) was found. In the study described here seropositivity to T. gondii was associated to work accidents in a subset of patients with low socioeconomic status. This is the first report of an association of T. gondii infection and work accidents. Further studies to confirm our results are needed. Results may help in designing optimal prevention strategies to avoid T. gondii infection.

  8. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kozluk, M.J.; Vijay, D.K.

    Postulated catastrophic rupture of high-energy piping systems is the fundamental criterion used for the safety design basis of both light and heavy water nuclear generating stations. Historically, the criterion has been applied by assuming a nonmechanistic instantaneous double-ended guillotine rupture of the largest diameter pipes inside of containment. Nonmechanistic, meaning that the assumption of an instantaneous guillotine rupture has not been based on stresses in the pipe, failure mechanisms, toughness of the piping material, nor the dynamics of the ruptured pipe ends as they separate. This postulated instantaneous double-ended guillotine rupture of a pipe was a convenient simplifying assumption thatmore » resulted in a conservative accident scenario. This conservative accident scenario has now become entrenched as the design basis accident for: containment design, shutdown system design, emergency fuel cooling systems design, and to establish environmental qualification temperature and pressure conditions. The requirement to address dynamic effects associated with the postulated pipe rupture subsequently evolved. The dynamic effects include: potential missiles, pipe whipping, blowdown jets, and thermal-hydraulic transients. Recent advances in fracture mechanics research have demonstrated that certain pipes under specific conditions cannot crack in ways that result in an instantaneous guillotine rupture. Canadian utilities are now using mechanistic fracture mechanics and leak-before-break assessments on a case-by-case basis, in limited applications, to support licensing cases which seek exemption from the need to consider the various dynamic effects associated with postulated instantaneous catastrophic rupture of high-energy piping systems inside and outside of containment.« less

  9. Driving Behaviors in Iran: A Descriptive Study Among Drivers of Mashhad City in 2014

    PubMed Central

    Bazzaz, Mojtaba Mousavi; Zarifian, Ahmadreza; Emadzadeh, Maryam; Vakili, Veda

    2015-01-01

    Background: Driver-related behaviors are substantial causes for motor vehicle accidents. It has been estimated that about 95% of all accidents are due to driver-related dangerous behaviors and approximately 60% of accidents are directly caused by driving behaviors. The aim of this study was to assess driving behaviors and its possible related factors among drivers in Mashhad city, Iran. Method: In a cross-sectional design, a total number of 514 drivers in Mashhad, Iran Surveyed. Manchester driver behavior questionnaire with 50 questions evaluated dangerous driving behaviors in 4 categories “aggressive violations”, “ordinary violations”, “errors” and “lapses”. Results: In this study, the median age of drivers was 31. Besides, 58.2% of men mentioned having a history of driving accident. Our study indicated smoking and alcohol drinking as risk factors of having more accidents. Hookah abuse is a predictor of aggressive violations and errors. Conclusion: This is the first study to assess the relation of personal car and its market value with the likelihood of having accidents. Due to major influences of driving fines, cigarette smoking, alcohol consumption and addiction on violations and errors, we recommend pivotal measures to be taken by road safety practitioners regarding driving surveillance. PMID:26153202

  10. Public Health Profile of Road Traffic Accidents in Kosovo 2010-2015

    PubMed Central

    Ramadani, Naser; Zhjeqi, Valbona; Berisha, Merita; Hoxha, Rina; Begolli, Ilir; Salihu, Drita; Krasniqi, Pranvera

    2017-01-01

    AIM: To determine the characteristics of the Socio-medical profile of road traffic accidents in Kosovo, between 2010 and 2015 year. STUDY DESIGN: Retrospective study. METHODS: A descriptive method based on the database of road traffic accidents from the National Police of Kosovo. RESULTS: In Kosovo for the period 2010-2015, on average, the yearly number of road traffic accidents is 18437 with mortality rate 7.4 per 100000 and lethality of 1.5%. The highest number of fatal cases are drivers and above 19 years old with more than 80%. Among injured significantly highest percentage is among passengers for all years and above 19 years old. Road traffic accident with a vehicle occurs most frequently, with approximately over 70%, mostly on dry road 72.9% and clear weather 71.1%. The driver is the contributing factors of road traffic accidents on average 99.3% whereas climatic conditions only 0.5%, with over 50% of crashes occurring in urban road 56.2%, mostly during Monday 16.0% and in the afternoon rush hours between 14.00-18.00 with 31.0%. CONCLUSIONS: There is a slight decrease in the mortality rate of 0.1‰ and lethality rate of 0.1% each year, whereas there is an increase of 21.5‰ for traumatism rate for each year. PMID:29362641

  11. [Risk factors associated with work-related accidents in the construction industry in the Valley of Mexico].

    PubMed

    Sarmiento-Salinas, Rodrigo; López-Rojas, Pablo; Marín-Cotoñieto, Irma Araceli; Godínez-Rocha, Arturo; Haro-García, Luis; Salinas-Tovar, Santiago

    2004-01-01

    Our aim was to describe construction-industry, work-related accident prevalence in, associated factors in, and potential impact on affiliated workers of the Mexican Institute of Social Security (Instituto Mexicano del Seguro Social, IMSS) in the Valley of Mexico. Prevalent cases in a retrospective case-control design. These include 385 construction-industry workers who were found to have construction work-related accidents in 2001. Controls comprised 385 active construction-industry workers without work-related accident background paired by gender, workplace, and worksite. Work-related accident prevalence in construction workers was 5.5%; most important risk factors and etiology fraction (Ef) included the following: age 16-20 years odds ratio, OR = 1.58, 95% confidence interval (95% CI) 1.40-10.7, p = 0.001, Ef 0.36; eventual insurance, OR = 3.7, 95% CI, 2.16-26.45, p = 0.001), Ef, 0.72, and no training for job, OR = 5.3, 95% CI, 4.9-69.2, p = 0.01), Ef: 0.81. Variables not showing significance were included salary, work shift, and workday. Work-related accident prevalence maintains its preponderance in the Valley of Mexico construction industry; identified risk factors are potentially modifiable, among which job training acquires unquestionable relevance.

  12. Introduction of the Space Shuttle Columbia Accident, Investigation Details, Findings and Crew Survival Investigation Report

    NASA Technical Reports Server (NTRS)

    Chandler, Michael

    2010-01-01

    As the Space Shuttle Program comes to an end, it is important that the lessons learned from the Columbia accident be captured and understood by those who will be developing future aerospace programs and supporting current programs. Aeromedical lessons learned from the Accident were presented at AsMA in 2005. This Panel will update that information, closeout the lessons learned, provide additional information on the accident and provide suggestions for the future. To set the stage, an overview of the accident is required. The Space Shuttle Columbia was returning to Earth with a crew of seven astronauts on 1Feb, 2003. It disintegrated along a track extending from California to Louisiana and observers along part of the track filmed the breakup of Columbia. Debris was recovered from Littlefield, Texas to Fort Polk, Louisiana, along a 567 statute mile track; the largest ever recorded debris field. The Columbia Accident Investigation Board (CAIB) concluded its investigation in August 2003, and released their findings in a report published in February 2004. NASA recognized the importance of capturing the lessons learned from the loss of Columbia and her crew and the Space Shuttle Program managers commissioned the Spacecraft Crew Survival Integrated Investigation Team (SCSIIT) to accomplish this. Their task was to perform a comprehensive analysis of the accident, focusing on factors and events affecting crew survival, and to develop recommendations for improving crew survival, including the design features, equipment, training and procedures intended to protect the crew. NASA released the Columbia Crew Survival Investigation Report in December 2008. Key personnel have been assembled to give you an overview of the Space Shuttle Columbia accident, the medical response, the medico-legal issues, the SCSIIT findings and recommendations and future NASA flight surgeon spacecraft accident response training. Educational Objectives: Set the stage for the Panel to address the investigation, medico-legal issues, the Spacecraft Crew Survival Integrated Investigation Team report and training for accident response.

  13. Third generation nuclear plants

    NASA Astrophysics Data System (ADS)

    Barré, Bertrand

    2012-05-01

    After the Chernobyl accident, a new generation of Light Water Reactors has been designed and is being built. Third generation nuclear plants are equipped with dedicated systems to insure that if the worst accident were to occur, i.e. total core meltdown, no matter how low the probability of such occurrence, radioactive releases in the environment would be minimal. This article describes the EPR, representative of this "Generation III" and a few of its competitors on the world market.

  14. Emergency-Evacuation Cart

    NASA Technical Reports Server (NTRS)

    Fedor, Otto H.; Owens, Lester J.

    1988-01-01

    Proposed cart designed to remove injured worker from vicinity of hazardous chemical spill. Self-propelled cart enables rescuer to move victim of industrial accident quickly away from toxic, flammable, explosive, corrosive, carcinogenic, asphyxiating, or extremely cold liquids. Intended for use where too dangerous for ambulances and other vehicles to approach accident site. Constructed of high-strength tubing, rides on bicycle wheels with balloon tires. Rescuer steers cart with handle at rear. Estimated mass of fully equipped vehicle is 650 lb.

  15. Biomechanical analysis of occupant kinematics in rollover motor vehicle accidents: dynamic spit test.

    PubMed

    Sances, Anthony; Kumaresan, Srirangam; Clarke, Richard; Herbst, Brian; Meyer, Steve

    2005-01-01

    A better understanding of occupant kinematics in rollover accidents helps to advance biomechanical knowledge and to enhance the safety features of motor vehicles. While many rollover accident simulation studies have adopted the static approach to delineate the occupant kinematics in rollover accidents, very few studies have attempted the dynamic approach. The present work was designed to study the biomechanics of restrained occupants during rollover accidents using the steady-state dynamic spit test and to address the importance of keeping the lap belt fastened. Experimental tests were conducted using an anthropometric 50% Hybrid III dummy in a vehicle. The vehicle was rotated at 180 degrees/second and the dummy was restrained using a standard three-point restraint system. The lap belt of the dummy was fastened either by using the cinching latch plate or by locking the retractor. Three configurations of shoulder belt harness were simulated: shoulder belt loose on chest with cinch plate, shoulder belt under the left arm and shoulder belt behind the chest. In all tests, the dummy stayed within the confinement of the vehicle indicating that the securely fastened lap belt holds the dummy with dynamic movement of 3 1/2" to 4". The results show that occupant movement in rollover accidents is least affected by various shoulder harness positions with a securely fastened lap belt. The present study forms a first step in delineating the biomechanics of occupants in rollover accidents.

  16. Farm Safety

    PubMed Central

    Wilson, G. S.

    1966-01-01

    Accident and safety are related terms; the higher the accident rate in any industry, the greater is the need for safety measures designed to prevent accidents. This article discusses the accident and safety problems in agriculture, which includes horticulture and forestry. There is still a tendency among townspeople to think of the countryside as peaceful and tranquil, a place where nothing happens very quickly and far removed from violent death or crippling injury. This pleasant rustic picture has undergone a striking change in the last 30 years owing to considerable agricultural mechanization and the development of chemical pesticides, which have brought new dangers to those who live and work on the land. Although men have readily adapted themselves to new machines and methods, they have not proved as able to recognize new dangers and learn how to guard against them. In consequence, accidents have increased to such an extent that the whole industry has realized the need for positive preventive measures. In this country, it is generally accepted that an employer of labour has a responsibility to provide safe working conditions for those he employs. Farm safety legislation goes a little further and usually requires an employer to provide necessary safeguards, with the added requirement on a worker to make use of them. It is a feature of accident prevention work that it never reaches a stage when it can be regarded as complete. Even when a reduction in accidents has been achieved, the effort must be sustained or the trend will be quickly reversed. Images PMID:5904095

  17. [Epidemiological characteristics and types of domestic and leisure accidents: sentinel health network of Castilla y León (2009)].

    PubMed

    Mateos Baruque, María Loreto; Vián González, Eva María; Gil Costa, Milagros; Lozano Alonso, José Eugenio; Santamaría Rodrigo, Elena; Herrero Cembellín, Belén

    2012-05-01

    To study incidence, epidemiological characteristics and types of domestic and leisure accidents in Castilla y León during 2009. A descriptive study using a prospective sample design. Health Primary Care Centres of Castilla y León. The Nurse Registry is made up of 130 nurses selected by conglomerates analysis. They cover 5% of the population. The information was obtained by means of an anonymous form. The studied variables were sex, age, type, place, type and origin of the accident. A descriptive analysis was performed using χ(2), Fischer, χ(2) of trends and t Student tests, with 95% confidence intervals. The annual cumulative incidence was 2651 cases/100000 inhabitants, there being slightly higher percentage of men (50.4%). The ≤ 15 and ≥ 65 years age groups had more accidents. The time of day of 49.2% of the accidents was during the morning and 71.7% were on a working day. The majority (57.1%) took place in the home, 16,8% in the street, and 7.3% in schools. The most common accidents types were falls to the same level (40.4%) and use of cutting and sharp objects (22.7%). Most accidents took place within the home, on a working day and by falls. The most affected were the ≤ 15 and ≥ 65 years old age groups. Copyright © 2010 Elsevier España, S.L. All rights reserved.

  18. Typical pedestrian accident scenarios for the development of autonomous emergency braking test protocols.

    PubMed

    Lenard, James; Badea-Romero, Alexandro; Danton, Russell

    2014-12-01

    An increasing proportion of new vehicles are being fitted with autonomous emergency braking systems. It is difficult for consumers to judge the effectiveness of these safety systems for individual models unless their performance is evaluated through track testing under controlled conditions. This paper aimed to contribute to the development of relevant test conditions by describing typical circumstances of pedestrian accidents. Cluster analysis was applied to two large British databases and both highlighted an urban scenario in daylight and fine weather where a small pedestrian walks across the road, especially from the near kerb, in clear view of a driver who is travelling straight ahead. For each dataset a main test configuration was defined to represent the conditions of the most common accident scenario along with test variations to reflect the characteristics of less common accident scenarios. Some of the variations pertaining to less common accident circumstances or to a minority of casualties in these scenarios were proposed as optional or supplementary test elements for an outstanding performance rating. Many considerations are incorporated into the final design and implementation of an actual testing regime, such as cost and the state of development of technology; only the representation of accident data lay within the scope of this paper. It would be desirable to ascertain the wider representativeness of the results by analysing accident data from other countries in a similar manner. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Comprehensive Health Risk Management after the Fukushima Nuclear Power Plant Accident.

    PubMed

    Yamashita, S

    2016-04-01

    Five years have passed since the Great East Japan Earthquake and the subsequent Fukushima Daiichi Nuclear Power Plant accident on 11 March 2011. Countermeasures aimed at human protection during the emergency period, including evacuation, sheltering and control of the food chain were implemented in a timely manner by the Japanese Government. However, there is an apparent need for improvement, especially in the areas of nuclear safety and protection, and also in the management of radiation health risk during and even after the accident. Continuous monitoring and characterisation of the levels of radioactivity in the environment and foods in Fukushima are now essential for obtaining informed consent to the decisions on living in the radio-contaminated areas and also on returning back to the evacuated areas once re-entry is allowed; it is also important to carry out a realistic assessment of the radiation doses on the basis of measurements. Until now, various types of radiation health risk management projects and research have been implemented in Fukushima, among which the Fukushima Health Management Survey is the largest health monitoring project. It includes the Basic Survey for the estimation of external radiation doses received during the first 4 months after the accident and four detailed surveys: thyroid ultrasound examination, comprehensive health check-up, mental health and lifestyle survey, and survey on pregnant women and nursing mothers, with the aim to prospectively take care of the health of all the residents of Fukushima Prefecture for a long time. In particular, among evacuees of the Fukushima Nuclear Power Plant accident, concern about radiation risk is associated with psychological stresses. Here, ongoing health risk management will be reviewed, focusing on the difficult challenge of post-disaster recovery and resilience in Fukushima. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

  20. Management of Ultimate Risk of Nuclear Power Plants by Source Terms - Lessons Learned from the Chernobyl Accident

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Genn Saji

    2006-07-01

    The term 'ultimate risk' is used here to describe the probabilities and radiological consequences that should be incorporated in siting, containment design and accident management of nuclear power plants for hypothetical accidents. It is closely related with the source terms specified in siting criteria which assures an adequate separation of radioactive inventories of the plants from the public, in the event of a hypothetical and severe accident situation. The author would like to point out that current source terms which are based on the information from the Windscale accident (1957) through TID-14844 are very outdated and do not incorporate lessonsmore » learned from either the Three Miles Island (TMI, 1979) nor Chernobyl accident (1986), two of the most severe accidents ever experienced. As a result of the observations of benign radionuclides released at TMI, the technical community in the US felt that a more realistic evaluation of severe reactor accident source terms was necessary. In this background, the 'source term research project' was organized in 1984 to respond to these challenges. Unfortunately, soon after the time of the final report from this project was released, the Chernobyl accident occurred. Due to the enormous consequences induced by then accident, the one time optimistic perspectives in establishing a more realistic source term were completely shattered. The Chernobyl accident, with its human death toll and dispersion of a large part of the fission fragments inventories into the environment, created a significant degradation in the public's acceptance of nuclear energy throughout the world. In spite of this, nuclear communities have been prudent in responding to the public's anxiety towards the ultimate safety of nuclear plants, since there still remained many unknown points revolving around the mechanism of the Chernobyl accident. In order to resolve some of these mysteries, the author has performed a scoping study of the dispersion and deposition mechanisms of fuel particles and fission fragments during the initial phase of the Chernobyl accident. Through this study, it is now possible to generally reconstruct the radiological consequences by using a dispersion calculation technique, combined with the meteorological data at the time of the accident and land contamination densities of {sup 137}Cs measured and reported around the Chernobyl area. Although it is challenging to incorporate lessons learned from the Chernobyl accident into the source term issues, the author has already developed an example of safety goals by incorporating the radiological consequences of the accident. The example provides safety goals by specifying source term releases in a graded approach in combination with probabilities, i.e. risks. The author believes that the future source term specification should be directly linked with safety goals. (author)« less

  1. Application of oil spill model to marine pollution and risk control problems

    NASA Astrophysics Data System (ADS)

    Aseev, Nikita; Agoshkov, Valery; Sheloput, Tatyana

    2017-04-01

    Oil transportation by sea induces challenging problems of environmental control. Millions of tonnes of oil are yearly released during routine ship operations, not to mention vast spills due to different accidents (e.g. tanker collisions, grounding, etc.). Oil pollution is dangerous to marine organisms such as plants, fish and mammals, leading to widespread damage to our planet. In turn, fishery and travel agencies can lose money and clients, and ship operators are obliged to pay huge penalties for environmental pollution. In this work we present the method of accessing oil pollution of marine environment using recently developed oil spill model. The model describes basic processes of the oil slick evolution: oil transport due to currents, drift under the action of wind, spreading on the surface, evaporation, emulsification and dispersion. Such parameters as slick location, mass, density of oil, water content, viscosity and density of "water-in-oil" emulsion can be calculated. We demonstrate how to apply the model to damage calculation problems using a concept of average damage to particular marine area. We also formulate the problem of oil spill risk control, when some accident parameters are not known, but their probability distribution is given. We propose a new algorithm to solve such problems and show results of our model simulations. The work can be interesting to broad environmental, physics and mathematics community. The work is supported by Russian Foundation for Basic Research grant 16-31-00510.

  2. Proceedings of the fifth workshop on containment integrity

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Parks, M.B.; Hughey, C.E.

    1992-07-01

    The Fifth Workshop on Containment integrity was held in Washington, DC, on May 12--14, 1992. The purpose of these workshops is to provide an international forum for the exchange of information on performance of containments in nuclear power plants under severe accident loadings. Severe accident investigations of existing containment designs as well as future advanced containments were presented during the workshop. There were 145 participants at the workshop from 15 countries. Individual papers have been cataloged separately.

  3. Fuel Cycle Research and Development Accident Tolerant Fuels Series 1 (ATF-1) Irradiation Testing FY 2016 Status Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Core, Gregory Matthew

    This report contains a summary of irradiation testing of Fuel Cycle Research and Development (FCRD) Accident Tolerant Fuels Series 1 (ATF 1) experiments performed at Idaho National Laboratory (INL) in FY 2016. ATF 1 irradiation testing work performed in FY 2016 included design, analysis, and fabrication of ATF-1B drop in capsule ATF 1 series experiments and irradiation testing of ATF-1 capsules in the ATR.

  4. Presenting a model for dynamic facial expression changes in detecting drivers' drowsiness.

    PubMed

    Karchani, Mohsen; Mazloumi, Adel; Saraji, Gebraeil Nasl; Gharagozlou, Faramarz; Nahvi, Ali; Haghighi, Khosro Sadeghniiat; Abadi, Bahador Makki; Foroshani, Abbas Rahimi

    2015-01-01

    Drowsiness while driving is a major cause of accidents. A driver fatigue detection system that is designed to sound an alarm, when appropriate, can prevent many accidents that sometime leads to the loss of life and property. In this paper, we classify drowsiness detection sensors and their strong and weak points. A compound model is proposed that uses image processing techniques to study the dynamic changes of the face to recognize drowsiness during driving.

  5. Overview of experimental support for fission-product transport analyses at Oak Ridge National Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wichner, R.P.

    The program was designed to determine fission product and aerosol release rates from irradiated fuel under accident conditions, to identify the chemical forms of the released material, and to correlate the results with experimental and specimen conditions with the data from related experiments. These tests of PWR fuel were conducted and fuel specimen and test operating data are presented. The nature and rate of fission product vapor interaction with aerosols were studied. Aerosol deposition rates and transport in the reactor vessel during LWR core-melt accidents were studied. The Nuclear Safety Pilot Plant is dedicated to developing an expanded data basemore » on the behavior of aerosols generated during a severe accident.« less

  6. Summary and evaluation: fuel dynamics loss-of-flow experiments (tests L2, L3, and L4)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Barts, E.W.; Deitrich, L.W.; Eberhart, J.G.

    1975-09-01

    Three similar experiments conducted to support the analyses of hypothetical LMFBR unprotected-loss-of-flow accidents are summarized and evaluated. The tests, designated L2, L3, and L4, provided experimental data against which accident-analysis codes could be compared, so as to guide further analysis and modeling of the initiating phases of the hypothetical accident. The tests were conducted using seven-pin bundles of mixed-oxide fuel pins in Mark-II flowing-sodium loops in the TREAT reactor. Test L2 used fresh fuel. Tests L3 and L4 used irradiated fuel pins having, respectively, ''intermediate-power'' (no central void) and ''high-power'' (fully developed central void) microstructure. 12 references. (auth)

  7. DAMS: A Model to Assess Domino Effects by Using Agent-Based Modeling and Simulation.

    PubMed

    Zhang, Laobing; Landucci, Gabriele; Reniers, Genserik; Khakzad, Nima; Zhou, Jianfeng

    2017-12-19

    Historical data analysis shows that escalation accidents, so-called domino effects, have an important role in disastrous accidents in the chemical and process industries. In this study, an agent-based modeling and simulation approach is proposed to study the propagation of domino effects in the chemical and process industries. Different from the analytical or Monte Carlo simulation approaches, which normally study the domino effect at probabilistic network levels, the agent-based modeling technique explains the domino effects from a bottom-up perspective. In this approach, the installations involved in a domino effect are modeled as agents whereas the interactions among the installations (e.g., by means of heat radiation) are modeled via the basic rules of the agents. Application of the developed model to several case studies demonstrates the ability of the model not only in modeling higher-level domino effects and synergistic effects but also in accounting for temporal dependencies. The model can readily be applied to large-scale complicated cases. © 2017 Society for Risk Analysis.

  8. Risk management of key issues of FPSO

    NASA Astrophysics Data System (ADS)

    Sun, Liping; Sun, Hai

    2012-12-01

    Risk analysis of key systems have become a growing topic late of because of the development of offshore structures. Equipment failures of offloading system and fire accidents were analyzed based on the floating production, storage and offloading (FPSO) features. Fault tree analysis (FTA), and failure modes and effects analysis (FMEA) methods were examined based on information already researched on modules of relex reliability studio (RRS). Equipment failures were also analyzed qualitatively by establishing a fault tree and Boolean structure function based on the shortage of failure cases, statistical data, and risk control measures examined. Failure modes of fire accident were classified according to the different areas of fire occurrences during the FMEA process, using risk priority number (RPN) methods to evaluate their severity rank. The qualitative analysis of FTA gave the basic insight of forming the failure modes of FPSO offloading, and the fire FMEA gave the priorities and suggested processes. The research has practical importance for the security analysis problems of FPSO.

  9. MODELLING OF FUEL BEHAVIOUR DURING LOSS-OF-COOLANT ACCIDENTS USING THE BISON CODE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pastore, G.; Novascone, S. R.; Williamson, R. L.

    2015-09-01

    This work presents recent developments to extend the BISON code to enable fuel performance analysis during LOCAs. This newly developed capability accounts for the main physical phenomena involved, as well as the interactions among them and with the global fuel rod thermo-mechanical analysis. Specifically, new multiphysics models are incorporated in the code to describe (1) transient fission gas behaviour, (2) rapid steam-cladding oxidation, (3) Zircaloy solid-solid phase transition, (4) hydrogen generation and transport through the cladding, and (5) Zircaloy high-temperature non-linear mechanical behaviour and failure. Basic model characteristics are described, and a demonstration BISON analysis of a LWR fuel rodmore » undergoing a LOCA accident is presented. Also, as a first step of validation, the code with the new capability is applied to the simulation of experiments investigating cladding behaviour under LOCA conditions. The comparison of the results with the available experimental data of cladding failure due to burst is presented.« less

  10. In-vessel melt retention as a severe accident management strategy for the Loviisa Nuclear Power Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kymaelaeinen, O.; Tuomisto, H.; Theofanous, T.G.

    1997-02-01

    The concept of lower head coolability and in-vessel retention of corium has been approved as a basic element of the severe accident management strategy for IVO`s Loviisa Plant (VVER-440) in Finland. The selected approach takes advantage of the unique features of the plant such as low power density, reactor pressure vessel without penetrations at the bottom and ice-condenser containment which ensures flooded cavity in all risk significant sequences. The thermal analyses, which are supported by experimental program, demonstrate that in Loviisa the molten corium on the lower head of the reactor vessel is coolable externally with wide margins. This papermore » summarizes the approach and the plant modifications being implemented. During the approval process some technical concerns were raised, particularly with regard to thermal loadings caused by contact of cool cavity water and hot corium with the reactor vessel. Resolution of these concerns is also discussed.« less

  11. Nonlinear dynamical systems for theory and research in ergonomics.

    PubMed

    Guastello, Stephen J

    2017-02-01

    Nonlinear dynamical systems (NDS) theory offers new constructs, methods and explanations for phenomena that have in turn produced new paradigms of thinking within several disciplines of the behavioural sciences. This article explores the recent developments of NDS as a paradigm in ergonomics. The exposition includes its basic axioms, the primary constructs from elementary dynamics and so-called complexity theory, an overview of its methods, and growing areas of application within ergonomics. The applications considered here include: psychophysics, iconic displays, control theory, cognitive workload and fatigue, occupational accidents, resilience of systems, team coordination and synchronisation in systems. Although these applications make use of different subsets of NDS constructs, several of them share the general principles of the complex adaptive system. Practitioner Summary: Nonlinear dynamical systems theory reframes problems in ergonomics that involve complex systems as they change over time. The leading applications to date include psychophysics, control theory, cognitive workload and fatigue, biomechanics, occupational accidents, resilience of systems, team coordination and synchronisation of system components.

  12. Research on Basic Design Education: An International Survey

    ERIC Educational Resources Information Center

    Boucharenc, C. G.

    2006-01-01

    This paper reports on the results of a survey and qualitative analysis on the teaching of "Basic Design" in schools of design and architecture located in 22 countries. In the context of this research work, Basic Design means the teaching and learning of design fundamentals that may also be commonly referred to as the Principles of Two- and…

  13. Cognitive Awareness Prototype Development on User Interface Design

    ERIC Educational Resources Information Center

    Rosli, D'oria Islamiah

    2015-01-01

    Human error is a crucial problem in manufacturing industries. Due to the misinterpretation of information on interface system design, accidents or death may occur at workplace. Lack of human cognition criteria in interface system design is also one of the contributions to the failure in using the system effectively. Therefore, this paper describes…

  14. 10 CFR 50.49 - Environmental qualification of electric equipment important to safety for nuclear power plants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... following design basis events to ensure— (A) The integrity of the reactor coolant pressure boundary; (B) The...) Design basis events are defined as conditions of normal operation, including anticipated operational occurrences, design basis accidents, external events, and natural phenomena for which the plant must be...

  15. 10 CFR 50.49 - Environmental qualification of electric equipment important to safety for nuclear power plants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... following design basis events to ensure— (A) The integrity of the reactor coolant pressure boundary; (B) The...) Design basis events are defined as conditions of normal operation, including anticipated operational occurrences, design basis accidents, external events, and natural phenomena for which the plant must be...

  16. 10 CFR 50.49 - Environmental qualification of electric equipment important to safety for nuclear power plants.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... following design basis events to ensure— (A) The integrity of the reactor coolant pressure boundary; (B) The...) Design basis events are defined as conditions of normal operation, including anticipated operational occurrences, design basis accidents, external events, and natural phenomena for which the plant must be...

  17. Generalized railway tank car safety design optimization for hazardous materials transport: addressing the trade-off between transportation efficiency and safety.

    PubMed

    Saat, Mohd Rapik; Barkan, Christopher P L

    2011-05-15

    North America railways offer safe and generally the most economical means of long distance transport of hazardous materials. Nevertheless, in the event of a train accident releases of these materials can pose substantial risk to human health, property or the environment. The majority of railway shipments of hazardous materials are in tank cars. Improving the safety design of these cars to make them more robust in accidents generally increases their weight thereby reducing their capacity and consequent transportation efficiency. This paper presents a generalized tank car safety design optimization model that addresses this tradeoff. The optimization model enables evaluation of each element of tank car safety design, independently and in combination with one another. We present the optimization model by identifying a set of Pareto-optimal solutions for a baseline tank car design in a bicriteria decision problem. This model provides a quantitative framework for a rational decision-making process involving tank car safety design enhancements to reduce the risk of transporting hazardous materials. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. 23 CFR 1340.3 - Basic design requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2010-04-01 2010-04-01 false Basic design requirements. 1340.3 Section 1340.3...

  19. 23 CFR 1340.3 - Basic design requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2011-04-01 2011-04-01 false Basic design requirements. 1340.3 Section 1340.3...

  20. An expert system for the quantification of fault rates in construction fall accidents.

    PubMed

    Talat Birgonul, M; Dikmen, Irem; Budayan, Cenk; Demirel, Tuncay

    2016-01-01

    Expert witness reports, prepared with the aim of quantifying fault rates among parties, play an important role in a court's final decision. However, conflicting fault rates assigned by different expert witness boards lead to iterative objections raised by the related parties. This unfavorable situation mainly originates due to the subjectivity of expert judgments and unavailability of objective information about the causes of accidents. As a solution to this shortcoming, an expert system based on a rule-based system was developed for the quantification of fault rates in construction fall accidents. The aim of developing DsSafe is decreasing the subjectivity inherent in expert witness reports. Eighty-four inspection reports prepared by the official and authorized inspectors were examined and root causes of construction fall accidents in Turkey were identified. Using this information, an evaluation form was designed and submitted to the experts. Experts were asked to evaluate the importance level of the factors that govern fall accidents and determine the fault rates under different scenarios. Based on expert judgments, a rule-based expert system was developed. The accuracy and reliability of DsSafe were tested with real data as obtained from finalized court cases. DsSafe gives satisfactory results.

  1. [The peculiar features of conducting comprehensive expertises of the injuries inflicted inside the passenger car compartment].

    PubMed

    Fetisov, V A; Gusarov, A A; Smirenin, S A

    2016-01-01

    The present article deals with the problem of forensic medical diagnostics of the injuries inflicted inside the passenger car compartment during motor vehicle accidents. The authors place special emphasis on the fact of a significant increase in the number of road traffic accidents (RTA) with such consequences throughout the world. The modern automobile industry pays much attention to the enhancement of the car safety features by significantly improving the design of passenger compartments. It accounts for a change in the traditional character of the injuries to both the driver and the passengers resulting from motor vehicle accidents. This, in turn, creates difficulties for the forensic medical experts as regards personality identification of the subjects who happened to be inside the car at the moment of the collision especially in the case of unascertainable circumstances of the accident and/or the involvement of several victims. The authors describe peculiarities of the injuries inflicted inside the passenger car compartment during road traffic accidents including such that result from bringing the driver and the passengers closer to the construction elements of the car (stage I), their direct contact with these elements (stage II), and subsequent displacement (stage III).

  2. PWR-related integral safety experiments in the PKL 111 test facility SBLOCA under beyond-design-basis accident conditions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weber, P.; Umminger, K.J.; Schoen, B.

    1995-09-01

    The thermal hydraulic behavior of a PWR during beyond-design-basis accident scenarios is of vital interest for the verification and optimization of accident management procedures. Within the scope of the German reactor safety research program experiments were performed in the volumetrically scaled PKL 111 test facility by Siemens/KWU. This highly instrumented test rig simulates a KWU-design PWR (1300 MWe). In particular, the latest tests performed related to a SBLOCA with additional system failures, e.g. nitrogen entering the primary system. In the case of a SBLOCA, it is the goal of the operator to put the plant in a condition where themore » decay heat can be removed first using the low pressure emergency core cooling system and then the residual heat removal system. The experimental investigation presented assumed the following beyond-design-basis accident conditions: 0.5% break in a cold leg, 2 of 4 steam generators (SGs) isolated on the secondary side (feedwater- and steam line-valves closed), filled with steam on the primary side, cooldown of the primary system using the remaining two steam generators, high pressure injection system only in the two loops with intact steam generators, if possible no operator actions to reach the conditions for residual heat removal system activation. Furthermore, it was postulated that 2 of the 4 hot leg accumulators had a reduced initial water inventory (increased nitrogen inventory), allowing nitrogen to enter the primary system at a pressure of 15 bar and nearly preventing the heat transfer in the SGs ({open_quotes}passivating{close_quotes} U-tubes). Due to this the heat transfer regime in the intact steam generators changed remarkably. The primary system showed self-regulating system effects and heat transfer improved again (reflux-condenser mode in the U-tube inlet region).« less

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clayton, Daniel James; Lipinski, Ronald J.; Bechtel, Ryan D.

    As compact and light weight power sources with reliable, long lives, Radioisotope Power Systems (RPSs) have made space missions to explore the solar system possible. Due to the hazardous material that can be released during a launch accident, the potential health risk of an accident must be quantified, so that appropriate launch approval decisions can be made. One part of the risk estimation involves modeling the response of the RPS to potential accident environments. Due to the complexity of modeling the full RPS response deterministically on dynamic variables, the evaluation is performed in a stochastic manner with a Monte Carlomore » simulation. The potential consequences can be determined by modeling the transport of the hazardous material in the environment and in human biological pathways. The consequence analysis results are summed and weighted by appropriate likelihood values to give a collection of probabilistic results for the estimation of the potential health risk. This information is used to guide RPS designs, spacecraft designs, mission architecture, or launch procedures to potentially reduce the risk, as well as to inform decision makers of the potential health risks resulting from the use of RPSs for space missions.« less

  4. Human factors in aircraft incidents - Results of a 7-year study (Andre Allard Memorial Lecture)

    NASA Technical Reports Server (NTRS)

    Billings, C. E.; Reynard, W. D.

    1984-01-01

    It is pointed out that nearly all fatal aircraft accidents are preventable, and that most such accidents are due to human error. The present discussion is concerned with the results of a seven-year study of the data collected by the NASA Aviation Safety Reporting System (ASRS). The Aviation Safety Reporting System was designed to stimulate as large a flow as possible of information regarding errors and operational problems in the conduct of air operations. It was implemented in April, 1976. In the following 7.5 years, 35,000 reports have been received from pilots, controllers, and the armed forces. Human errors are found in more than 80 percent of these reports. Attention is given to the types of events reported, possible causal factors in incidents, the relationship of incidents and accidents, and sources of error in the data. ASRS reports include sufficient detail to permit authorities to institute changes in the national aviation system designed to minimize the likelihood of human error, and to insulate the system against the effects of errors.

  5. Experimental Design for Evaluating the Safety Benefits of Railroad Advance Warning Signs

    DOT National Transportation Integrated Search

    1979-04-01

    The report presents the findings and conclusions of a study to develop an experimental design and analysis plan for field testing and evaluation of the accident reduction potential of a proposed new railroad grade crossing advance warning sign. Sever...

  6. General aviation structures directly responsible for trauma in crash decelerations.

    DOT National Transportation Integrated Search

    1971-01-01

    An analytical study of general aviation accident injuries is presented. Needs for improvement of both the crash design of the interior of the cockpit and the structural integrity of the cockpit itself are clearly illustrated. Crash safety design in l...

  7. 10 CFR 72.122 - Overall requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... § 72.122 Overall requirements. (a) Quality Standards. Structures, systems, and components important to... natural phenomena. (1) Structures, systems, and components important to safety must be designed to... accidents. (2)(i) Structures, systems, and components important to safety must be designed to withstand the...

  8. Performances of the PIPER scalable child human body model in accident reconstruction

    PubMed Central

    Giordano, Chiara; Kleiven, Svein

    2017-01-01

    Human body models (HBMs) have the potential to provide significant insights into the pediatric response to impact. This study describes a scalable/posable approach to perform child accident reconstructions using the Position and Personalize Advanced Human Body Models for Injury Prediction (PIPER) scalable child HBM of different ages and in different positions obtained by the PIPER tool. Overall, the PIPER scalable child HBM managed reasonably well to predict the injury severity and location of the children involved in real-life crash scenarios documented in the medical records. The developed methodology and workflow is essential for future work to determine child injury tolerances based on the full Child Advanced Safety Project for European Roads (CASPER) accident reconstruction database. With the workflow presented in this study, the open-source PIPER scalable HBM combined with the PIPER tool is also foreseen to have implications for improved safety designs for a better protection of children in traffic accidents. PMID:29135997

  9. Interview protocols and ergonomics checklist for analysing overexertion back accidents among nursing personnel.

    PubMed

    Engkvist, I L; Hagberg, M; Wigaeus-Hjelm, E; Menckel, E; Ekenvall, L

    1995-06-01

    No documented strategy, including preventive strategies, for systematic investigation of overexertion back accidents among nursing personnel has yet been published. One aim of the present study was to develop standardized instruments for the systematic investigation of back accidents among nursing personnel in order to develop preventive strategies. Another aim was to produce a screening tool that could easily be used for identifying potential overexertion back accident hazards. Two structured interview protocols were developed, one for the injured person and one for the supervisor. An ergonomics checklist was designed for the most important spaces according to accident statistics: patient's room, corridor, toilet, and also one for 'other space', eg X-ray and treatment rooms. The instruments were developed by frequent discussions and adjustments in a task force of researchers and occupational health personnel. The protocols were tested in two steps before a final version was established. The construct validity and interobserver reliability of the checklist were tested by ten ergonomists, who checked a patient's room, a toilet and a corridor with some known hazards. The constructed validity agreement was 90% in 19 of 26 items in the checklist. The interobserver reliability had the same figures as the validity for all items in the checklist. The interview protocols and checklist appear to be suitable for systematic investigation of overexertion back accidents.

  10. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    NASA Astrophysics Data System (ADS)

    Hashim, Yusof bin; Taha, Zahari bin

    2015-02-01

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger's injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

  11. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hashim, Yusof bin; Taha, Zahari bin

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. Themore » research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.« less

  12. Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010–2013 national accident reports

    PubMed Central

    Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

    2017-01-01

    Objectives We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Design Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. Setting A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. Primary and secondary outcome measures The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Results Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Conclusions Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. PMID:28209605

  13. Stability and failure analysis of steering tie-rod

    NASA Astrophysics Data System (ADS)

    Jiang, GongFeng; Zhang, YiLiang; Xu, XueDong; Ding, DaWei

    2008-11-01

    A new car in operation of only 8,000 km, because of malfunction, resulting in lost control and rammed into the edge of the road, and then the basic vehicle scrapped. According to the investigation of the site, it was found that the tie-rod of the car had been broken. For the subjective analysis of the accident and identifying the true causes of rupture of the tierod, a series of studies, from the angle of theory to experiment on the bended broken tie-rod, were conducted. The mechanical model was established; the stability of the defective tie-rod was simulated based on ANSYS software. Meanwhile, the process of the accident was simulated considering the effect of destabilization of different vehicle speed and direction of the impact. Simultaneously, macro graphic test, chemical composition analysis, microstructure analysis and SEM analysis of the fracture were implemented. The results showed that: 1) the toughness of the tie-rod is at a normal level, but there is some previous flaws. One quarter of the fracture surface has been cracked before the accident. However, there is no relationship between the flaw and this incident. The direct cause is the dynamic instability leading to the large deformation of impact loading. 2) The declining safety factor of the tie-rod greatly due to the previous flaws; the result of numerical simulation shows that previous flaw is the vital factor of structure instability, on the basis of the comparison of critical loads of the accident tie-rod and normal. The critical load can decrease by 51.3% when the initial defect increases 19.54% on the cross-sectional area, which meets the Theory of Koiter.

  14. Patterns and consequences of inadequate sleep in college students: substance use and motor vehicle accidents.

    PubMed

    Taylor, Daniel J; Bramoweth, Adam D

    2010-06-01

    We examined college sleep patterns and consequences using a cross-sectional design. We found that students get insufficient sleep and frequently use medication and alcohol as sleep aids, use stimulants as alertness aids, and fall asleep at the wheel, or have motor vehicle accidents due to sleepiness. Future studies should focus on effective interventions for sleep in college students. Copyright 2010 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  15. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Costa, David A.; Cournoyer, Michael E.; Merhege, James F.

    Criticality is the state of a nuclear chain reacting medium when the chain reaction is just self-sustaining (or critical). Criticality is dependent on nine interrelated parameters. Moreover, we design criticality safety controls in order to constrain these parameters to minimize fissions and maximize neutron leakage and absorption in other materials, which makes criticality more difficult or impossible to achieve. We present the consequences of criticality accidents are discussed, the nine interrelated parameters that combine to affect criticality are described, and criticality safety controls used to minimize the likelihood of a criticality accident are presented.

  16. Presenting a model for dynamic facial expression changes in detecting drivers’ drowsiness

    PubMed Central

    Karchani, Mohsen; Mazloumi, Adel; Saraji, Gebraeil Nasl; Gharagozlou, Faramarz; Nahvi, Ali; Haghighi, Khosro Sadeghniiat; Abadi, Bahador Makki; Foroshani, Abbas Rahimi

    2015-01-01

    Drowsiness while driving is a major cause of accidents. A driver fatigue detection system that is designed to sound an alarm, when appropriate, can prevent many accidents that sometime leads to the loss of life and property. In this paper, we classify drowsiness detection sensors and their strong and weak points. A compound model is proposed that uses image processing techniques to study the dynamic changes of the face to recognize drowsiness during driving. PMID:26120417

  17. The role of PRA in the safety assessment of VVER Nuclear Power Plants in Ukraine.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kot, C.

    1999-05-10

    Ukraine operates thirteen (13) Soviet-designed pressurized water reactors, VVERS. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs), in accordance with new SAR content requirements issued in September 1995, by the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine. The requirements are in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. The last two requirements, on PRA and BDBA, are new, and the DBA requirements are an expanded version of the older SAR requirements. The US Departmentmore » of Energy (USDOE), as part of its Soviet-Designed Reactor Safety activities, is providing assistance and technology transfer to Ukraine to support their nuclear power plants (NPPs) in developing a Western-type technical basis for the new SARs. USDOE sponsored In-Depth Safety Assessments (ISAs) are in progress at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1, and a follow-on study has been initiated at Khmenytskyy Unit 1. The ISA projects encompass most areas of plant safety evaluation, but the initial emphasis is on performing a detailed, plant-specific Level 1 Internal Events PRA. This allows the early definition of the plant risk profile, the identification of risk significant accident sequences and plant vulnerabilities and provides guidance for the remainder of the safety assessments.« less

  18. 75 FR 11574 - Draft Regulatory Guide: Issuance, Availability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-11

    ... agency's ``Regulatory Guide'' series. This series was developed to describe and make available to the... protection during plant operation and maintenance activities. For plants that have a design basis that... coatings be qualified and capable of surviving a design-basis accident without adversely affecting safety...

  19. Preliminary assessment of the health and environmental impacts of transporting M55 rockets from Lexington-Blue Grass Depot activity, Anniston Army depot, and Umatilla depot activity to alternative disposal facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carnes, S.A.; Breck, J.E.; Copenhaver, E.D.

    1986-03-01

    This assessment discusses the potential health and environmental impacts of transporting M55 rockets filled with nerve agent GB or VX from various existing Army storage depots to alternative Army depots for disposal. The origin depots include Anniston Army Depot in Alabama, Lexington-Blue Grass Depot Activity in Kentucky, and Umatilla Depot Activity in Oregon. The destination depots include Pine Bluff Arsenal in Arkansas, Tooele Army Depot in Utah, and the facility on Johnston Island in the central Pacific Ocean. This assessment considers the possible impacts of normal transport operations and of two postulated accident scenarios on the air quality, ground andmore » surface water, aquatic ecology, terrestrial ecology, human health, and cultural and socioeconomic resources of the various transport corridors involved. The impacts of these scenarios are assessed for truck, train, and air transport for each orgin-destination pair. The analysis considers three basic scenario during transport: (1) normal operations with no atmospheric release of nerve agent; (2) a minor agent spill (the contents of one rocket being released to the biosphere); and (3) a worst-case accident involving the release of a large, specified quantity of nerve agent to the biosphere. The extremely low probabilities of such accidents, which are reported elsewhere, are noted.« less

  20. Required length of guardrails before hazards.

    PubMed

    Tomasch, E; Sinz, W; Hoschopf, H; Gobald, M; Steffan, H; Nadler, B; Nadler, F; Strnad, B; Schneider, F

    2011-11-01

    One way to protect against impacts during run-off-road accidents with infrastructure is the use of guardrails. However, real-world accidents indicate that vehicles can leave the road and end up behind the guardrail. These vehicles have no possibility of returning to the lane. Vehicles often end up behind the guardrail because the length of the guardrails installed before hazards is too short; this can lead to a collision with a shielded hazard. To identify the basic speed for determining the necessary length of guardrails, we analyzed the speed at which vehicles leave the roadway from the ZEDATU (Zentrale Datenbank Tödlicher Unfälle) real-world accidents database. The required length of guardrail was considered the length that reduces vehicle speed at a maximum theoretically possible deceleration of 0.3g behind the barrier based on real-world road departure speed. To determine the desired length of a guardrail ahead of a hazard, we developed a relationship between guardrail length and the speed at which vehicles depart the roadway. If the initial elements are flared away from the carriageway, the required length will be reduced by up to an additional 30% The ZEDATU database analysis showed that extending the current length of guardrails to the evaluated required length would reduce the number of fatalities among occupants of vehicles striking bridge abutments by approximately eight percent. Copyright © 2011 Elsevier Ltd. All rights reserved.

  1. Effects of health and safety problem recognition on small business facility investment

    PubMed Central

    2013-01-01

    Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems. PMID:24472180

  2. Sleep Apnea Related Risk of Motor Vehicle Accidents is Reduced by Continuous Positive Airway Pressure: Swedish Traffic Accident Registry Data

    PubMed Central

    Karimi, Mahssa; Hedner, Jan; Häbel, Henrike; Nerman, Olle; Grote, Ludger

    2015-01-01

    Study Objectives: Obstructive sleep apnea (OSA) is associated with an increased risk of motor vehicle accidents (MVAs). The rate of MVAs in patients suspected of having OSA was determined and the effect of continuous positive airway pressure (CPAP) was investigated. Design: MVA rate in patients referred for OSA was compared to the rate in the general population using data from the Swedish Traffic Accident Registry (STRADA), stratified for age and calendar year. The risk factors for MVAs, using demographic and polygraphy data, and MVA rate before and after CPAP were evaluated in the patient group. Setting: Clinical sleep laboratory and population based control (n = 635,786). Patients: There were 1,478 patients, male sex 70.4%, mean age 53.6 (12.8) y. Interventions: CPAP. Measurements and Results: The number of accidents (n = 74) among patients was compared with the expected number (n = 30) from a control population (STRADA). An increased MVA risk ratio of 2.45 was found among patients compared with controls (P < 0.001). Estimated excess accident risk was most prominent in the elderly patients (65–80 y, seven versus two MVAs). In patients, driving distance (km/y), EDS (Epworth Sleepiness score ≥ 16), short habitual sleep time (≤ 5 h/night), and use of hypnotics were associated with increased MVA risk (odds ratios 1.2, 2.1, 2.7 and 2.1, all P ≤ 0.03). CPAP use ≥ 4 h/night was associated with a reduction of MVA incidence (7.6 to 2.5 accidents/1,000 drivers/y). Conclusions: The motor vehicle accident risk in this large cohort of unselected patients with obstructive sleep apnea suggests a need for accurate tools to identify individuals at risk. Sleep apnea severity (e.g., apnea-hypopnea index) failed to identify patients at risk. Citation: Karimi M, Hedner J, Häbel H, Nerman O, Grote L. Sleep apnea related risk of motor vehicle accidents is reduced by continuous positive airway pressure: Swedish traffic accident registry data. SLEEP 2015;38(3):341–349. PMID:25325460

  3. Effects of health and safety problem recognition on small business facility investment.

    PubMed

    Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

    2013-10-23

    This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.

  4. Analysis of fatal accidents with tractors in the Centre of Portugal: Ten years analysis.

    PubMed

    Antunes, Soraia M; Cordeiro, Cristina; Teixeira, Helena M

    2018-06-01

    Tractors have been described as one of the deadliest farming implements concerning agricultural activity. In Portugal, the scientific investigations about this problem are practically non-existent, with only statistical studies performed by entities related to road traffic safety, not in accordance to the study now performed, pinpointing the possibility of an underreporting of these accidents. This work aims to characterize the fatal tractor accidents in Portugal, autopsied at the Forensic Pathology Department of the Centre Branch of the National Institute of Legal Medicine and Forensic Sciences of Portugal, analysing several variables: gender, age, occupation, survival time, the victim position in the tractor, cause of death, toxicological and histological exams, year/month/day of the week, type of agricultural machine, existence of rollover protective structures (ROPS), type of accident, ground conditions, circumstantial information and geographic distribution of the accidents. All the autopsies between 2005 and 2014 were analysed. The victim profile corresponded to a man (89.5%), between 61 and 70 years old (33.3%), retired (43.9%), being the tractor driver (45.6%). In most of the cases, death occurred in less than 24h after the accident. These fatalities arose mainly in May and October. Rollover in sloping land was the most common type of accident, and cranioencephalic, thoracic and abdominal traumatic injuries were the main cause of death. In 16.2% of the cases, blood alcohol concentration was above the lower limit established in our road traffic law (<0.5g/L). There was lack information about the use of ROPS (95.9%), and even when existent, the protections were not used or were incorrectly used. This is the first national study involving the description of the forensic achievements in each autopsy related to tractor accidents, and the corresponding circumstances that contributed to the death. Many barriers remain about this matter, but the Portuguese government begin to design several laws to prevent this type of accidents. Future investigations should be performed to understand the real dimension of tractor accidents in Portugal, and to comprehend the efficiency of laws implemented by the government. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Aid to planning the marketing of mining area boundaries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Giles, R.H. Jr.

    Reducing trespass, legal costs, and timber and wildlife poaching and increasing control, safety, and security are key reasons why mine land boundaries need to be marked. Accidents may be reduced, especially when associated with blast area boundaries, and in some cases increased income may be gained from hunting and recreational fees on well-marked areas. A BASIC computer program for an IBM-PC has been developed that requires minimum inputs to estimate boundary marking costs. This paper describes the rationale for the program and shows representative outputs. 3 references, 3 tables.

  6. Nuclear energy: salvation or suicide. [Contains glossary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Collins, C.C.

    A collection of 700 editorials and feature articles collected from 125 US newspapers addresses the dominant areas of concern about nuclear power: plant safety, radioactive wastes, proliferation, and cost. The editorial debates present the pros and cons of Three Mile Island and other accidents, ocean dumping, evacuation plans, radioactive waste transport and storage, nuclear fuel processing, the Karen Silkwood case, and breeder reactors. The appendix raises the question of the future for fission and the possibility of nuclear fusion as an alternative. There is a subject index and a glossary of basic terms.

  7. Lift truck safety review

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cadwallader, L.C.

    1997-03-01

    This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

  8. [Nuclear energy and environment: review of the IAEA environmental projects].

    PubMed

    Fesenko, S; Fogt, G

    2012-01-01

    The review of the environmental projects of the International Atomic Energy Agency is presented. Basic IAEA documents intended to protect humans and the Environment are considered and their main features are discussed. Some challenging issues in the area of protection of the Environment and man, including the impact of nuclear facilities on the environment, radioactive waste management, and remediation of the areas affected by radiological accidents, nuclear testing and sites of nuclear facilities are also discussed. The need to maintain the existing knowledge in radioecology and protection of the environment is emphasised.

  9. 3D neutronic codes coupled with thermal-hydraulic system codes for PWR, and BWR and VVER reactors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Langenbuch, S.; Velkov, K.; Lizorkin, M.

    1997-07-01

    This paper describes the objectives of code development for coupling 3D neutronics codes with thermal-hydraulic system codes. The present status of coupling ATHLET with three 3D neutronics codes for VVER- and LWR-reactors is presented. After describing the basic features of the 3D neutronic codes BIPR-8 from Kurchatov-Institute, DYN3D from Research Center Rossendorf and QUABOX/CUBBOX from GRS, first applications of coupled codes for different transient and accident scenarios are presented. The need of further investigations is discussed.

  10. Evidence from a cohort of able bodied adults to support the need for driver training for motorized scooters before community participation.

    PubMed

    Nitz, Jennifer C

    2008-02-01

    This study sought to utilize the implementation of a new competency test in order to define skills required to safely drive a motorized scooter. This test endeavours to reduce the number of driving and pedestrian related accidents, by determining an acceptable level of driver skill and awareness. Healthy subjects, who might at some time use a motorized scooter for mobility, were recruited from the local community. Each undertook a driver competency test including basic driving skills, traffic and multiple tasks. Ten subjects repeated the test three times to determine practice effect on proficiency. Thirty-three of the 50 participating subjects (mean age 34 years) failed at least one test item. Basic skills of reversing, weave and zigzag, and all traffic and performing multiple simultaneous tasks produced failures. Driving skills for motorized scooters need to be taught and learned with assessment for competency recommended before unrestricted community driving is allowed. Basic driving skills including weaving, steering in reverse and traffic and multiple tasking need to be taught and tested for all new users of this equipment.

  11. 75 FR 922 - Notification and Reporting of Aircraft Accidents or Incidents and Overdue Aircraft, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-07

    ... pose to crews, passengers, and bystanders. However, the NTSB notes that propeller blades are designed... intact and in place during normal operation. Propeller blades are not designed or expected to continue to... release of all or a portion of a propeller blade from an aircraft, inconsistent with its design parameters...

  12. Basic Principles and Practices of Integrated Dosimetric Passportization of the Settlements in Ukraine.

    PubMed

    Likhtarov, I A; Kovgan, L M; Masiuk, S V; Ivanova, O M; Chepurny, M I; Boyko, Z N; Gerasymenko, V B

    2015-12-01

    The purpose of the review is to demonstrate the results of dosimetric passportization (performed in 1991-2014) for the settlements of Ukraine which suffered from radioactive contamination caused by the Chornobyl accident. The dosimetric passportization played a key role in the National program on the liquidation of aftermath of the Chornobyl accident directed on recovery through all stages of the current radiation situation control and decision support touching upon various types of interventions and social benefits to the population of radioactively contaminated areas. The works being performed under dosimetric passportization did not have analogues among the researches which took place after other large-scale industrial and municipal accidents as well their scales as the duration of both radio-ecological and dosimetric monitoring.The new methodological approaches to the assessment of so-called passport doses of a settlement as well as to the definition of the concept of annual dose being the dose used to make decisions for providing both direct and indirect emergency countermeasures for the settlements of Ukraine became pioneering ones. During all the post-accident period there were issued sixteen collections of general dosimetric passportization data which accumulate the results of hundreds of thousands spectrometric, radiochemical and radiation levels measurements and WBC measurements carried out in 1991-2014.The annual passport doses calculated on the basis of these measurements (including their components) are unique information that quantifies the level and time dynamics of the radiation situation for each of the 2161 settlements of 74 raions in 12 oblasts during all the post-accident period. Thanks to the works of dosimetric passportization of the settlements of Ukraine there were created databases to be unique in their structure and content with quantitative characteristics of the territorial and temporal distribution, the dynamics of changes of a number of important radiological parameters, namely over 500 thousands of measurements of concentration of 137Cs and 90Sr in the local foodstuff (milk and potatoes); there are more than 1.3 million of measurements of the cesium content in the body of residents of the settlements of Ukraine; there are 100 thousands of dose estimates (both internal and external ones were measured separately) of inhabitants living on the radioactively contaminated areas. The results of the dosimetric passportization served as one of the main exposure criteria for generalized aftermath of the Chornobyl accident represented in the National reports for the first 15, 20 and 25 years after the accident. I. A. Likhtarov, L. M. Kovgan, S. V. Masiuk, O. M. Ivanova, M. I. Chepurny.

  13. Roller skating accidents and injuries.

    PubMed

    Sedlin, E D; Zitner, D T; McGinniss, G

    1984-02-01

    A consecutive series of 65 fractures, dislocations, and ligament tears produced by roller skating accidents treated by the Orthopaedic Department of the Mt. Sinai Services at City Hospital Center of Elmhurst, New York, is reviewed. It was learned that the injuries resulting from collisions occurring in a skating rink were more serious than those resulting from street accidents. Data indicated that lack of expertise is a prominent factor in the production of serious injury. However, the sport has inherent risk which is not eliminated by expertise. It was concluded that roller skating can and does produce disabling injuries. In order to reduce the number of injuries it will be required to reduce crowding in rinks, designate separate beginners' areas, use training wheels or clampon-type of skates when learning, encourage lessons, and separate beginners in the rinks.

  14. Primary encopresis: evaluation and treatment.

    PubMed Central

    O'Brien, S; Ross, L V; Christophersen, E R

    1986-01-01

    Cathartic and behavioral treatment procedures for eliminating diurnal and nocturnal primary encopresis were investigated using a multiple-baseline design across four children. The dependent and independent variables measured were appropriate bowel movements, soiling accidents, independent toiletings, and cathartic use. Over 177 reliability observations (home visits) were conducted. For two of the children, treatment with cathartics and child-time remedied their soiling accidents and increased their independent toiletings in 8 to 11 weeks. While the cathartics and child-time increased the rate of appropriate bowel movements, they did not eliminate the soiling accidents with the other two children. Independent toiletings for these two children were achieved after 32 to 39 weeks of treatment when punishment procedures (positive practice, time-out, and hourly toilet sits) were incorporated and the suppositories were faded systematically. PMID:3733585

  15. Follow-up on hang gliding injuries in Colorado.

    PubMed

    Krissoff, W B

    1976-01-01

    In a period extending from July 1973 to December 1975, seven fatal hang glider accidents were recorded in Colorado, all among experienced pilots. In addition, 11 serious nonfatal injuries were reported, which may represent only a fraction of those occurring. Accidents were noted to be multifactorial, caused by (1) pilot error, (2) equipment failure, (3) terrain hazards, and (4) possible design shortcomings. Accidents can be expected to decline in frequency with improved pilot training programs, grading and regulation of sites, and standardized safety clothing. No doubt over time, the less safe standard Rogallo wing will be replaced by the more stable Superkites and controlled collapsibles, which offer a higher safety margin. In the last analysis, this sport will remain a popular yet high risk endeavor (Figs. 2 through 5).

  16. How shall we design the future vehicle for Chinese market.

    PubMed

    Chen, Fang; Wang, Minjuan; Zhu, Xi Chan; Li, Jiaqi

    2012-01-01

    Surface transportation system is developing very fast in China and the number of vehicles is increasing quickly as well. This development creates a lot of problems on traffic safety and the number of accident is also increasing. In this paper, we made deep analysis of different possible causes of safety problems through three aspects: the traffic environment and infrastructure, in-vehicle information system design and the characteristics of drivers. There are many factors in each aspects may contribute to the transportation safety problems. Problems with infrastructure design and traffic design contribute over 50% of the traffic accident. Another important factor is that people has very little traffic safety concept and very weak on understanding the important of right behavior on the road. This paper has pointed the urgent needs to study the human factors in road and transportation system and vehicle HMI design, as there are very few such studies available in literature based on Chinese situation. The paper also proposed the needs to develop proactive educational system that can promote driver's understanding of traffic safety and to take the right action during drive.

  17. AP1000{sup R} nuclear power plant safety overview for spent fuel cooling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gorgemans, J.; Mulhollem, L.; Glavin, J.

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe class pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and costs. The AP1000 design uses passive features to mitigate design basis accidents. The passive safety systems are designed to function without safety-grade support systems such as AC power, component cooling water, service water or HVAC. Furthermore, these passive features 'fail safe' during a non-LOCA event such that DC power and instrumentation are not required. The AP1000 also has simple, active, defense-in-depth systems to support normal plant operations. These active systems provide the first levelmore » of defense against more probable events and they provide investment protection, reduce the demands on the passive features and support the probabilistic risk assessment. The AP1000 passive safety approach allows the plant to achieve and maintain safe shutdown in case of an accident for 72 hours without operator action, meeting the expectations provided in the U.S. Utility Requirement Document and the European Utility Requirements for passive plants. Limited operator actions are required to maintain safe conditions in the spent fuel pool via passive means. In line with the AP1000 approach to safety described above, the AP1000 plant design features multiple, diverse lines of defense to ensure spent fuel cooling can be maintained for design-basis events and beyond design-basis accidents. During normal and abnormal conditions, defense-in-depth and other systems provide highly reliable spent fuel pool cooling. They rely on off-site AC power or the on-site standby diesel generators. For unlikely design basis events with an extended loss of AC power (i.e., station blackout) or loss of heat sink or both, spent fuel cooling can still be provided indefinitely: - Passive systems, requiring minimal or no operator actions, are sufficient for at least 72 hours under all possible pool heat load conditions. - After 3 days, several different means are provided to continue spent fuel cooling using installed plant equipment as well as off-site equipment with built-in connections. Even for beyond design basis accidents with postulated pool damage and multiple failures in the passive safety-related systems and in the defense-in-depth active systems, the AP1000 multiple spent fuel pool spray and fill systems provide additional lines of defense to prevent spent fuel damage. (authors)« less

  18. Substance use and social, health and safety-related factors among fatally injured drivers.

    PubMed

    Karjalainen, Karoliina; Blencowe, Tom; Lillsunde, Pirjo

    2012-03-01

    The aim of this study was to examine different socio-demographic, health and safety-related factors, and psychoactive substance use among fatally injured drivers in road traffic accidents in Finland during 2006-2008. An accident information register maintained by the Traffic Safety Committee of Insurance Companies (VALT) of the Finnish Motor Insurers' Centre was used as basic data, and the basic data were complemented with further toxicological analytical information retrieved from autopsy reports from the Department of Forensic Medicine, Helsinki University. The data included all the drivers (n=556) who were driving a motor vehicle and who died in a road traffic accident in Finland during 2006-2008. Of all the 556 fatally injured drivers 43% (n=238) had psychoactive substance findings. 51% (n=121) of substance positive drivers had a finding for alcohol only, the rest had a finding for one or more illicit/medicinal drugs impairing driving ability, and possibly also alcohol. Fatally injured drivers with alcohol findings were significantly younger (mean age 34 years) than sober drivers (mean age 44 years) or drivers with findings for drugs (mean age 45 years). Socio-demographic background did not differ substantially among drunken/drugged and sober drivers, although drivers with alcohol findings had a slightly lower education and socioeconomic position. Previous substance abuse problems were highly prevalent among drivers with substance findings and mental or both mental and physical health problems were more common among drivers with drug findings. The non-use of safety equipment and driving at a high speed were more common among fatally injured drivers with substance findings. Substance abuse and mental health problems, as well as reckless driving behavior were more pronounced among fatally injured drivers with substance findings when compared to sober drivers. Thus, prevention and early intervention concerning substance abuse, mental health problems and DUI are essential. Improved traffic safety cannot be achieved by means of traffic policy only, but integration with other policies, such as health and social policy should be strengthened. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. 49 CFR 1.84 - The Federal Highway Administration.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... environment. (e) Surveying and constructing forest highway system roads, defense highways and access roads... surveillance of accident locations; highway design, construction, and maintenance, including context sensitive...

  20. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE`s Systemmore » 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report.« less

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE`s Systemmore » 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E.« less

  2. A novel method of fuzzy fault tree analysis combined with VB program to identify and assess the risk of coal dust explosions

    PubMed Central

    Li, Jia; Wang, Deming; Huang, Zonghou

    2017-01-01

    Coal dust explosions (CDE) are one of the main threats to the occupational safety of coal miners. Aiming to identify and assess the risk of CDE, this paper proposes a novel method of fuzzy fault tree analysis combined with the Visual Basic (VB) program. In this methodology, various potential causes of the CDE are identified and a CDE fault tree is constructed. To overcome drawbacks from the lack of exact probability data for the basic events, fuzzy set theory is employed and the probability data of each basic event is treated as intuitionistic trapezoidal fuzzy numbers. In addition, a new approach for calculating the weighting of each expert is also introduced in this paper to reduce the error during the expert elicitation process. Specifically, an in-depth quantitative analysis of the fuzzy fault tree, such as the importance measure of the basic events and the cut sets, and the CDE occurrence probability is given to assess the explosion risk and acquire more details of the CDE. The VB program is applied to simplify the analysis process. A case study and analysis is provided to illustrate the effectiveness of this proposed method, and some suggestions are given to take preventive measures in advance and avoid CDE accidents. PMID:28793348

  3. A novel method of fuzzy fault tree analysis combined with VB program to identify and assess the risk of coal dust explosions.

    PubMed

    Wang, Hetang; Li, Jia; Wang, Deming; Huang, Zonghou

    2017-01-01

    Coal dust explosions (CDE) are one of the main threats to the occupational safety of coal miners. Aiming to identify and assess the risk of CDE, this paper proposes a novel method of fuzzy fault tree analysis combined with the Visual Basic (VB) program. In this methodology, various potential causes of the CDE are identified and a CDE fault tree is constructed. To overcome drawbacks from the lack of exact probability data for the basic events, fuzzy set theory is employed and the probability data of each basic event is treated as intuitionistic trapezoidal fuzzy numbers. In addition, a new approach for calculating the weighting of each expert is also introduced in this paper to reduce the error during the expert elicitation process. Specifically, an in-depth quantitative analysis of the fuzzy fault tree, such as the importance measure of the basic events and the cut sets, and the CDE occurrence probability is given to assess the explosion risk and acquire more details of the CDE. The VB program is applied to simplify the analysis process. A case study and analysis is provided to illustrate the effectiveness of this proposed method, and some suggestions are given to take preventive measures in advance and avoid CDE accidents.

  4. Protection of Workers and Third Parties during the Construction of Linear Structures

    NASA Astrophysics Data System (ADS)

    Vlčková, Jitka; Venkrbec, Václav; Henková, Svatava; Chromý, Adam

    2017-12-01

    The minimization of risk in the workplace through a focus on occupational health and safety (OHS) is one of the primary objectives for every construction project. The most serious accidents in the construction industry occur during work on earthworks and linear structures. The character of such structures places them among those posing the greatest threat to the public (referred to as “third parties”). They can be characterized as large structures whose construction may involve the building site extending in a narrow lane alongside previously constructed objects currently in use by the public. Linear structures are often directly connected to existing objects or buildings, making it impossible to guard the whole construction site. However, many OHS problems related to linear structures can be prevented during the design stage. The aim of this article is to introduce a new methodology which has been implemented into a computer program that deals with safety measures at construction sites where work is performed on linear structures. Based on existing experience with the design of such structures and their execution and supervision by safety coordinators, the basic types of linear structures, their location in the terrain, the conditions present during their execution and other marginal conditions and influences were modelled. Basic safety information has been assigned to this elementary information, which is strictly necessary for the construction process. The safety provisions can be grouped according to type, e.g. technical, organizational and other necessary documentation, or into sets of provisions concerning areas such as construction site safety, transport safety, earthworks safety, etc. The selection of the given provisions takes place using multiple criteria. The aim of creating this program is to provide a practical tool for designers, contractors and construction companies. The model can contribute to the sufficient awareness of these participants about technical and organizational provisions that can help them to meet workplace safety requirements. The software for the selection of safety provisions also contains module that can calculate necessary cost estimates using a calculation formula chosen by the user. All software data conform to European standards harmonized for the Czech Republic.

  5. Study on Failure of Third-Party Damage for Urban Gas Pipeline Based on Fuzzy Comprehensive Evaluation.

    PubMed

    Li, Jun; Zhang, Hong; Han, Yinshan; Wang, Baodong

    2016-01-01

    Focusing on the diversity, complexity and uncertainty of the third-party damage accident, the failure probability of third-party damage to urban gas pipeline was evaluated on the theory of analytic hierarchy process and fuzzy mathematics. The fault tree of third-party damage containing 56 basic events was built by hazard identification of third-party damage. The fuzzy evaluation of basic event probabilities were conducted by the expert judgment method and using membership function of fuzzy set. The determination of the weight of each expert and the modification of the evaluation opinions were accomplished using the improved analytic hierarchy process, and the failure possibility of the third-party to urban gas pipeline was calculated. Taking gas pipelines of a certain large provincial capital city as an example, the risk assessment structure of the method was proved to conform to the actual situation, which provides the basis for the safety risk prevention.

  6. Biochemical Characterization, Action on Macrophages, and Superoxide Anion Production of Four Basic Phospholipases A2 from Panamanian Bothrops asper Snake Venom

    PubMed Central

    Rueda, Aristides Quintero; Rodríguez, Isela González; Arantes, Eliane C.; Setúbal, Sulamita S.; Calderon, Leonardo de A.; Zuliani, Juliana P.; Stábeli, Rodrigo G.; Soares, Andreimar M.

    2013-01-01

    Bothrops asper (Squamata: Viperidae) is the most important venomous snake in Central America, being responsible for the majority of snakebite accidents. Four basic PLA2s (pMTX-I to -IV) were purified from crude venom by a single-step chromatography using a CM-Sepharose ion-exchange column (1.5 × 15 cm). Analysis of the N-terminal sequence demonstrated that pMTX-I and III belong to the catalytically active Asp49 phospholipase A2 subclass, whereas pMTX-II and IV belong to the enzymatically inactive Lys49 PLA2s-like subclass. The PLA2s isolated from Panama Bothrops asper venom (pMTX-I, II, III, and IV) are able to induce myotoxic activity, inflammatory reaction mainly leukocyte migration to the muscle, and induce J774A.1 macrophages activation to start phagocytic activity and superoxide production. PMID:23509779

  7. Current status of SPINNORs designs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Su'ud, Zaki

    2010-06-22

    This study discuss about the SPINNOR (Small Power Reactor, Indonesia, No On-site Refuelling) and the VSPINNOR (Very Small Power Reactor, Indonesia, No On-site Refuelling) which are small lead-bismuth cooled nuclear power reactors with fast neutron spectrum that could be operated for more than 10 or 15 years without on-site refuelling. They are based on the concept of a long-life core reactor developed in Indonesia since early 1990 in collaboration with the Research Laboratory for Nuclear Reactors of the Tokyo Institute of Technology (RLNR TITech). The reactor cores are designed to have near zero (less then one effective delayed neutron fraction)more » burn-up reactivity swing during the whole course of their operation to avoid a possibility of prompt criticality accident. The basic concept is that central region of the reactor core is filled with fertile (blanket) material. During the reactor operation fissile material accumulates in this central region, which helps to compensate fissile material loss in the peripheral core region and also contributes to negative coolant loss reactivity effect. A concept of high fuel volume fraction in the core is applied to achieve smaller size of a critical reactor. In this paper we consider to add Np-237 to the fuel to enhance non proliferation characteristics of the systems. The effect of Np-237 amount variation is discussed.« less

  8. 32 CFR 537.8 - Investigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., for example, vehicle defects or improper maintenance, road design and absence of warning signs... furnish necessary information, it can usually be obtained by other means, for example, from an accident...

  9. 46 CFR 154.1440 - Antidotes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Safety... Guide for Use in Accidents Involving Dangerous Goods, printed by IMO, London, U.K. for the cargoes being...

  10. Context-aware system for pre-triggering irreversible vehicle safety actuators.

    PubMed

    Böhmländer, Dennis; Dirndorfer, Tobias; Al-Bayatti, Ali H; Brandmeier, Thomas

    2017-06-01

    New vehicle safety systems have led to a steady improvement of road safety and a reduction in the risk of suffering a major injury in vehicle accidents. A huge leap forward in the development of new vehicle safety systems are actuators that have to be activated irreversibly shortly before a collision in order to mitigate accident consequences. The triggering decision has to be based on measurements of exteroceptive sensors currently used in driver assistance systems. This paper focuses on developing a novel context-aware system designed to detect potential collisions and to trigger safety actuators even before an accident occurs. In this context, the analysis examines the information that can be collected from exteroceptive sensors (pre-crash data) to predict a certain collision and its severity to decide whether a triggering is entitled or not. A five-layer context-aware architecture is presented, that is able to collect contextual information about the vehicle environment and the actual driving state using different sensors, to perform reasoning about potential collisions, and to trigger safety functions upon that information. Accident analysis is used in a data model to represent uncertain knowledge and to perform reasoning. A simulation concept based on real accident data is introduced to evaluate the presented system concept. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. The Initial Atmospheric Transport (IAT) Code: Description and Validation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Morrow, Charles W.; Bartel, Timothy James

    The Initial Atmospheric Transport (IAT) computer code was developed at Sandia National Laboratories as part of their nuclear launch accident consequences analysis suite of computer codes. The purpose of IAT is to predict the initial puff/plume rise resulting from either a solid rocket propellant or liquid rocket fuel fire. The code generates initial conditions for subsequent atmospheric transport calculations. The Initial Atmospheric Transfer (IAT) code has been compared to two data sets which are appropriate to the design space of space launch accident analyses. The primary model uncertainties are the entrainment coefficients for the extended Taylor model. The Titan 34Dmore » accident (1986) was used to calibrate these entrainment settings for a prototypic liquid propellant accident while the recent Johns Hopkins University Applied Physics Laboratory (JHU/APL, or simply APL) large propellant block tests (2012) were used to calibrate the entrainment settings for prototypic solid propellant accidents. North American Meteorology (NAM )formatted weather data profiles are used by IAT to determine the local buoyancy force balance. The IAT comparisons for the APL solid propellant tests illustrate the sensitivity of the plume elevation to the weather profiles; that is, the weather profile is a dominant factor in determining the plume elevation. The IAT code performed remarkably well and is considered validated for neutral weather conditions.« less

  12. 23 CFR 970.212 - Federal lands safety management system (SMS).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... planning, design, construction, maintenance, and operations. (c) The SMS shall be designed to fit the NPS... for the collection, maintenance and reporting of a data base that includes: (i) Accident records with... standards) for low volume roads may be tailored to be consistent with the functional classification of the...

  13. 40 CFR 68.215 - Permit content and air permitting authority or designated agency requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Permit content and air permitting authority or designated agency requirements. 68.215 Section 68.215 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Other...

  14. A Safety Handbook for Science Teachers.

    ERIC Educational Resources Information Center

    Everett, K.; Jenkins, E. W.

    This publication is a safety handbook designed for science teachers of elementary and secondary schools. In an effort to insure prevention of accidents in school laboratories, it advocates careful planning, adequate experimental design, and the acquisition of correct laboratory techinques on the part of the teacher. The handbook gives instructions…

  15. Designing with Traffic Safety in Mind.

    ERIC Educational Resources Information Center

    Matthews, John

    1998-01-01

    Provides an example of how one county public school system was able to minimize traffic accidents and increase safety around its schools. Illustrations are provided of safer bus loading zones, pedestrian walkways and sidewalks, staff parking, and acceptable methods for staging buses. A checklist for school driveway design concludes the article.…

  16. Instrumentation Performance During the TMI-2 Accident

    NASA Astrophysics Data System (ADS)

    Rempe, Joy L.; Knudson, Darrell L.

    2014-08-01

    The accident at the Three Mile Island Unit 2 (TMI-2) reactor provided a unique opportunity to evaluate sensors exposed to severe accident conditions. The loss of coolant and the hydrogen combustion that occurred during this accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2 sensor survivability and data qualification efforts. This new effort focused upon a set of sensors that provided critical data to TMI-2 operators for assessing the condition of the plant and the effects of mitigating actions taken by these operators. In addition, the effort considered sensors providing data required for subsequent accident simulations. Over 100 references related to instrumentation performance and post-accident evaluations of TMI-2 sensors and measurements were reviewed. Insights gained from this review are summarized within this paper. As noted within this paper, several techniques were invoked in the TMI-2 post-accident program to evaluate sensor survivability status and data qualification, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design but more easily removed from the TMI-2 plant for evaluations. Conclusions from this review provide important insights related to sensor survivability and enhancement options for improving sensor performance. In addition, this paper provides recommendations related to sensor survivability and the data evaluation process that could be implemented in upcoming Fukushima Daiichi recovery efforts.

  17. Environmental justice: frequency and severity of US chemical industry accidents and the socioeconomic status of surrounding communities

    PubMed Central

    Elliott, M; Wang, Y; Lowe, R; Kleindorfer, P

    2004-01-01

    Study objectives: The Clean Air Act Amendments of 1990 requires that chemical facilities in the US with specified quantities of certain toxic or flammable chemicals file a five year history of accidents. This study considers the relation between the reported accidents and surrounding community characteristics. Design: This study is a retrospective analysis of the association between the demographics of counties in which facilities are located and the risk of accidental chemical release and resulting injuries at those facilities. The "location risk" (the risk that a facility having large volumes of hazardous chemicals is located in a community) and "operations risk" (the risk of an accident itself) are investigated. Setting:1994–2000 accident history data from 15 083 US industrial facilities using one or more of 140 flammable or toxic substances above a threshold level. Demographic makeup of 2333 counties surrounding these facilities was determined from the 1990 US census. Main results: Larger and more chemical intensive facilities tend to be located in counties with larger African-American populations and in counties with both higher median incomes and high levels of income inequality. Even after adjusting for location risk there is greater risk of accidents for facilities in heavily African-American counties (OR of accident = 1.9, 95% CI = 1.5 to 2.4). Conclusions: Further research and policy interventions are required to reduce the probability of locating facilities in an inequitable fashion, as well as health surveillance, and regulatory monitoring and enforcement activities to ensure that hazardous facilities in minority communities prepare and prevent accidental chemical releases to the same standards as elsewhere. PMID:14684723

  18. Design Considerations for Attitude State Awareness and Prevention of Entry into Unusual Attitudes

    NASA Technical Reports Server (NTRS)

    Ellis, Kyle K. E.; Prinzel, Lawrence J., III; Arthur, Jarvis J.; Nicholas, Stephanie N.; Kiggins, Daniel; Verstynen, Harry; Hubbs, Clay; Wilkerson, James

    2017-01-01

    Loss of control - inflight (LOC-I) has historically represented the largest category of commercial aviation fatal accidents. A review of the worldwide transport airplane accidents (2001-2010) evinced that loss of attitude or energy state awareness was responsible for a large majority of the LOC-I events. A Commercial Aviation Safety Team (CAST) study of 18 worldwide loss-of-control accidents and incidents determined that flight crew loss of attitude awareness or energy state awareness due to lack of external visual reference cues was a significant causal factor in 17 of the 18 reviewed flights. CAST recommended that "Virtual Day-Visual Meteorological Condition" (Virtual Day-VMC) displays be developed to provide the visual cues necessary to prevent loss-of-control resulting from flight crew spatial disorientation and loss of energy state awareness. Synthetic vision or equivalent systems (SVS) were identified for a design "safety enhancement" (SE-200). Part of this SE involves the conduct of research for developing minimum aviation system performance standards (MASPS) for these flight deck display technologies to aid flight crew attitude and energy state awareness similar to that of a virtual day-VMC-like environment. This paper will describe a novel experimental approach to evaluating a flight crew's ability to maintain attitude awareness and to prevent entry into unusual attitudes across several SVS optical flow design considerations. Flight crews were subjected to compound-event scenarios designed to elicit channelized attention and startle/surprise within the crew. These high-fidelity scenarios, designed from real-world events, enable evaluation of the efficacy of SVS at improving flight crew attitude awareness to reduce the occurrence of LOC-I incidents in commercial flight operations.

  19. Making a House a Home... for Everyone

    ERIC Educational Resources Information Center

    McGowen, Sandra G.

    2010-01-01

    Universal design is the design of environments and products to be used by people of all ages and abilities. The goal is to use design to reduce physical effort, regardless of some of the frailties that may be acquired due to an accident, health, or age. EasyLiving Homes[R] is a non-profit organization that advocates making all homes visitable and…

  20. The Role of Human Error in Design, Construction, and Reliability of Marine Structures.

    DTIC Science & Technology

    1994-10-01

    The 1979 Three Mile Island nuclear plant accident was largely a result of a failure to properly sort out and recognize critically important information...determinating the goals and objectives of the program and by evaluating and interpreting the results in terms of structural design, construction, and...67 Checking Models in Structural Design ....................................... 69 Nuclear Power Plants

  1. Intospace a European industrial initiative to commercialise space

    NASA Astrophysics Data System (ADS)

    von der Lippe, Juergen K.; Sprenger, Heinz J.

    2005-07-01

    Intospace, founded in 1985, was the response to the government's request to provide evidence to the industrial promises of commercial utilisation of space systems such as Spacelab and the already planned space station. The company was set up with an exceptional structure comprising 95 shareholders from all over western Europe from space and non-space industry and financial institutes. The companies joined as shareholders and committed beyond the basic capital to cover financial losses up to a given limit allowing the company to invest in market development. Compared to other commercial initiatives in the European space scenario the product that Intospace was supposed to offer, was without doubt the most demanding one regarding its market prospects. The primary product of Intospace was to provide services to commercial customers for using microgravity for research and production in space. This was based on the assumption that an effective operational infrastructure with frequent flights of Spacelab and Eureca would be available leading finally to the space station with Columbus. A further assumption had been that basic research projects of the agencies would provide sufficient data as a basis for commercial project planning. The conflict with these assumptions is best illustrated by the fact that the lifetime of Intospace is framed by the two shuttle disasters, the Challenger accident a couple of months after foundation of Intospace and the Columbia accident with Spacehab on board leading to liquidation of the company. The paper will present the background behind the foundation of the Intospace initiative, describe the objectives and major strategic steps to develop the market.

  2. Lessons Learned from the Accident at the Fukushima Dai-ichi Nuclear Power Plant-More than Basic Knowledge: Education and its Effects Improve the Preparedness and Response to Radiation Emergency.

    PubMed

    Hachiya, Misao; Akashi, Makoto

    2016-09-01

    A huge earthquake struck the northeast coast of the main island of Japan on 11 March 2011 triggering an extremely large tsunami to hit the area. The earthquake and tsunami caused serious damage to the Fukushima nuclear power plants (NPPs) of Tokyo Electric Power Company (TEPCO), resulting in large amounts of radioactive materials being released into the environment. The major nuclides released were (131)I, (134)Cs and (137)Cs. The deposition of these radioactive materials on land resulted in a high ambient dose of radiation around the NPPs, especially within a 20-km radius. Dose assessments based on behavior survey and ambient dose rates revealed that external doses to most residents were lower than 5 mSv, with the maximum dose being 25 mSv. It was fortunate that no workers from the NPPs required treatment from the viewpoint of deterministic effects of radiation. However, a lack of exact knowledge of radiation and its effects prevented the system for medical care and transportation of contaminated personnel from functioning. After the accident, demands or requests for training courses have been increasing. We have learned from the response to this disaster that basic knowledge of radiation and its effects is extremely important for not only professionals such as health care providers but also for other professionals including teachers. © World Health Organisation 2016. All rights reserved. The World Health Organization has granted Oxford University Press permission for the reproduction of this article.

  3. Knowledge and occupational exposure to blood and body fluids among health care workers and medical students.

    PubMed

    Denić, Ljiljana Marković; Ostrić, Irena; Pavlović, Andrija; Dimitra, Kalimanovska Ostrić

    2012-01-01

    Health workers and medical students are at occupational risk of blood-borne diseases during the accidents, that is, via percutaneous injury or entry of blood or body fluids through the mucosa or injured skin. to review and analyze the knowledge, attitudes and perception of risks of bloodborne diseases of the clinical course students and health workers as well as the frequency of accidents. Cross-sectional study was carried out among the students of the Faculty of Medicine in Belgrade, and health workers of the Clinical Center of Serbia. The subjects responded anonymously to questionnaire specially designed for the study. Both students and health workers were aware, in a high percentage, of the fact that the risk of hepatitis B spread was about 30%. Significantly more students gave affirmative reply that blood as biological material was a potential hazard of HIV infection spread (p = 0.001), and significantly more students knew that HIV would not be spread by sweat (p = 0.001). Hepatitis B vacci-nation was administered only to 24.1% of students and 71.4% of health workers. About 10% of students and 65.5% of health workers experienced some accident. There was no significant difference of accidents bet-ween nurses/technicians and physicians (p > 0.05), as well as of accidents and a total length of service (p > 0.05). The majority of accidents occurred during the use of needle/sharp object (in 27.3% of students and 33.1% of health workers). About 40% of students and slightly over a half of the workers reported the accidents to appropriate authorities. Additional education in this field is considered necessary by 73% of students. During the studies and via continuous medical education it is necessary to upgrade the level of knowledge on prevention of accidents, what would, at least partially, influence their reduction.

  4. Study of Psycho-Social Factors Affecting Traffic Accidents Among Young Boys in Tehran

    PubMed Central

    Javadi, Seyyed Mohammad Hossein; Fekr Azad, Hossein; Tahmasebi, Siyamak; Rafiei, Hassan; Rahgozar, Mehdi; Tajlili, Alireza

    2015-01-01

    Background: Unprecedented growth of fatalities due to traffic accidents in the recent years has raised great concerns and efforts of authorities in order to identify and control the causes of these accidents. Objectives: In the present study, the contribution of psychological, social, demographic, environmental and behavioral factors on traffic accidents was studied for young boys in Tehran, emphasizing the importance of psychosocial factors. Patients and Methods: The design of the present study was quantitative (correlational) in which a sample population including 253 boys from Tehran (Iran) with an age range of 18 to 24 who had been referred to insurance institutions, hospitals, correctional facilities as well as prisons, were selected using stratified cluster sampling during the year 2013.The subjects completed the following questionnaires: demographic, general health, lifestyle, Manchester Driving Behavior Questionnaire (MDBQ), young parenting, and NEO-Five Factor Inventory (NEO-FFI). For data analysis, descriptive statistics, correlation coefficient, and inferential statistics including simultaneous regression, stepwise regression, and structural equations modeling were used. Results: The findings indicated that in the psychosocial model of driving behavior (including lapses, mistakes, and intentional violations) and accidents, psychological factors, depression (P < 0.02), personality trait of conscientiousness (P < 0.02), failure schema due to the parenting style of mother (P = 0.001), and perception of police commands (P < 0.002), played an important role in predicting driving behavior. Among social factors, perception of police regulations (P = 0.003), had an important effect on violations and mistakes. Among environmental and behavioral factors, major factors such as driving age (P = 0.001), drug and alcohol use (P = 0.001), having driver’s license (P = 0.013), records of imprisonment or committing a crime (P = 0.012) were also able to predict occurrence of accidents. Conclusions: As the results of this study show, different factors contribute to different driving behaviors and accidents. The broad scope of these factors links accidents to other social issues and damages. PMID:26421169

  5. Study of Psycho-Social Factors Affecting Traffic Accidents Among Young Boys in Tehran.

    PubMed

    Javadi, Seyyed Mohammad Hossein; Fekr Azad, Hossein; Tahmasebi, Siyamak; Rafiei, Hassan; Rahgozar, Mehdi; Tajlili, Alireza

    2015-07-01

    Unprecedented growth of fatalities due to traffic accidents in the recent years has raised great concerns and efforts of authorities in order to identify and control the causes of these accidents. In the present study, the contribution of psychological, social, demographic, environmental and behavioral factors on traffic accidents was studied for young boys in Tehran, emphasizing the importance of psychosocial factors. The design of the present study was quantitative (correlational) in which a sample population including 253 boys from Tehran (Iran) with an age range of 18 to 24 who had been referred to insurance institutions, hospitals, correctional facilities as well as prisons, were selected using stratified cluster sampling during the year 2013.The subjects completed the following questionnaires: demographic, general health, lifestyle, Manchester Driving Behavior Questionnaire (MDBQ), young parenting, and NEO-Five Factor Inventory (NEO-FFI). For data analysis, descriptive statistics, correlation coefficient, and inferential statistics including simultaneous regression, stepwise regression, and structural equations modeling were used. The findings indicated that in the psychosocial model of driving behavior (including lapses, mistakes, and intentional violations) and accidents, psychological factors, depression (P < 0.02), personality trait of conscientiousness (P < 0.02), failure schema due to the parenting style of mother (P = 0.001), and perception of police commands (P < 0.002), played an important role in predicting driving behavior. Among social factors, perception of police regulations (P = 0.003), had an important effect on violations and mistakes. Among environmental and behavioral factors, major factors such as driving age (P = 0.001), drug and alcohol use (P = 0.001), having driver's license (P = 0.013), records of imprisonment or committing a crime (P = 0.012) were also able to predict occurrence of accidents. As the results of this study show, different factors contribute to different driving behaviors and accidents. The broad scope of these factors links accidents to other social issues and damages.

  6. A defense in depth approach for nuclear power plant accident management

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chih-Yao Hsieh; Hwai-Pwu Chou

    2015-07-01

    An initiating event may lead to a severe accident if the plant safety functions have been challenged or operators do not follow the appropriate accident management procedures. Beyond design basis accidents are those corresponding to events of very low occurrence probability but such an accident may lead to significant consequences. The defense in depth approach is important to assure nuclear safety even in a severe accident. Plant Damage States (PDS) can be defined by the combination of the possible values for each of the PDS parameters which are showed on the nuclear power plant simulator. PDS is used to identifymore » what the initiating event is, and can also give the information of safety system's status whether they are bypassed, inoperable or not. Initiating event and safety system's status are used in the construction of Containment Event Tree (CET) to determine containment failure modes by using probabilistic risk assessment (PRA) technique. Different initiating events will correspond to different CETs. With these CETs, the core melt frequency of an initiating event can be found. The use of Plant Damage States (PDS) is a symptom-oriented approach. On the other hand, the use of Containment Event Tree (CET) is an event-oriented approach. In this study, the Taiwan's fourth nuclear power plants, the Lungmen nuclear power station (LNPS), which is an advanced boiling water reactor (ABWR) with fully digitized instrumentation and control (I and C) system is chosen as the target plant. The LNPS full scope engineering simulator is used to generate the testing data for method development. The following common initiating events are considered in this study: loss of coolant accidents (LOCA), total loss of feedwater (TLOFW), loss of offsite power (LOOP), station blackout (SBO). Studies have indicated that the combination of the symptom-oriented approach and the event-oriented approach can be helpful to find mitigation strategies and is useful for the accident management. (authors)« less

  7. Nuclear power: Siting and safety

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Openshaw, S.

    1986-01-01

    By 2030, half, or even two-thirds, of all electricity may be generated by nuclear power. Major reactor accidents are still expected to be rare occurrences, but nuclear safety is largely a matter of faith. Terrorist attacks, sabotage, and human error could cause a significant accident. Reactor siting can offer an additional, design-independent margin of safety. Remote geographical sites for new plants would minimize health risks, protect the industry from negative changes in public opinion concerning nuclear energy, and improve long-term public acceptance of nuclear power. U.K. siting practices usually do not consider the contribution to safety that could be obtainedmore » from remote sites. This book discusses the present trends of siting policies of nuclear power and their design-independent margin of safety.« less

  8. Predicting System Accidents with Model Analysis During Hybrid Simulation

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.; Fleming, Land D.; Throop, David R.

    2002-01-01

    Standard discrete event simulation is commonly used to identify system bottlenecks and starving and blocking conditions in resources and services. The CONFIG hybrid discrete/continuous simulation tool can simulate such conditions in combination with inputs external to the simulation. This provides a means for evaluating the vulnerability to system accidents of a system's design, operating procedures, and control software. System accidents are brought about by complex unexpected interactions among multiple system failures , faulty or misleading sensor data, and inappropriate responses of human operators or software. The flows of resource and product materials play a central role in the hazardous situations that may arise in fluid transport and processing systems. We describe the capabilities of CONFIG for simulation-time linear circuit analysis of fluid flows in the context of model-based hazard analysis. We focus on how CONFIG simulates the static stresses in systems of flow. Unlike other flow-related properties, static stresses (or static potentials) cannot be represented by a set of state equations. The distribution of static stresses is dependent on the specific history of operations performed on a system. We discuss the use of this type of information in hazard analysis of system designs.

  9. [Keys to preventing accidents in children in the school context].

    PubMed

    Gabari Gambarte, M Inés; Sáenz Mendía, Raquel

    2016-11-02

    To learn about children's perception of the causes and prevention strategies involved in school accidents. The sample included 584 school children aged 8-9 years from Navarra. A mixed design was chosen by questionnaire with three open-response questions and one multiple-choice assessment. Analysis was performed in two phases: 1) qualitative development of categories and dimensions of the responses of narrative content, and 2) quantitative variables for recoding correlational analysis. 22 categories emerged, which make up three perceptual dimensions: 1) attribution of causality (5), 2) identification of mechanisms of avoidance (11), and 3) development of coping strategies (6). The correlation intra-variables portray varying degrees: on the one hand, moderate positive numbers (r>0.5) in allocating and identifying causality avoidance mechanisms and, on the other hand, high positive correlation values (r>0.7) referred to developing coping strategies. Children are able to identify accidents as a health problem. They question the multiplicity of elements involved and relate the origin and kind of accident to prevention and support mechanisms. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  10. The influence of car registration year on driver casualty rates in Great Britain.

    PubMed

    Broughton, Jeremy

    2012-03-01

    A previous paper analysed data from the British national road accident reporting system to investigate the influence upon car driver casualty rates of the general type of car being driven and its year of first registration. A statistical model was fitted to accident data from 2001 to 2005, and this paper updates the principal results using accident data from 2003 to 2007. Attention focuses upon the role of year of first registration since this allows the influence of developments in car design upon occupant casualty numbers to be evaluated. Three additional topics are also examined with these accident data. Changes over time in frontal and side impacts are compared. Changes in the combined risk for the two drivers involved in a car-car collision are investigated, being the net result of changes in secondary safety and aggressivity. Finally, the results of the new model relating to occupant protection are related to an index that had been developed previously to analyse changes over time in the secondary safety of the car fleet. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Job stress as a risk factor for absences among manual workers: a 12-month follow-up study

    PubMed Central

    HEO, Yong-Seok; LEEM, Jong-Han; PARK, Shin-Goo; JUNG, Dal-Young; KIM, Hwan-Cheol

    2015-01-01

    This study was conducted to evaluate the impact of job stress on absence from work caused by illnesses and accidents through a prospective research design. A total of 2,349 manual workers were included in this analysis. In the first survey, job stress was determined using the Korean Occupational Stress Scale-Short Form. In the second survey, information on absence due to accidents or illnesses during the past one year was obtained through a questionnaire. The relationship was analyzed using a logistic regression model with multiple imputation. After adjusting for confounding variables for males, absence due to accidents was statistically associated with high job demand, insufficient job control, inadequate social support, and organizational injustice. In addition, high job demands and organizational injustice were related to increased absence due to illnesses in both genders. A lack of reward was associated with increased absence due to illnesses among female workers. We found that job stress was associated with a higher risk of absence caused by accidents or illnesses of manual workers. PMID:26212413

  12. Job stress as a risk factor for absences among manual workers: a 12-month follow-up study.

    PubMed

    Heo, Yong-Seok; Leem, Jong-Han; Park, Shin-Goo; Jung, Dal-Young; Kim, Hwan-Cheol

    2015-01-01

    This study was conducted to evaluate the impact of job stress on absence from work caused by illnesses and accidents through a prospective research design. A total of 2,349 manual workers were included in this analysis. In the first survey, job stress was determined using the Korean Occupational Stress Scale-Short Form. In the second survey, information on absence due to accidents or illnesses during the past one year was obtained through a questionnaire. The relationship was analyzed using a logistic regression model with multiple imputation. After adjusting for confounding variables for males, absence due to accidents was statistically associated with high job demand, insufficient job control, inadequate social support, and organizational injustice. In addition, high job demands and organizational injustice were related to increased absence due to illnesses in both genders. A lack of reward was associated with increased absence due to illnesses among female workers. We found that job stress was associated with a higher risk of absence caused by accidents or illnesses of manual workers.

  13. Development of fission-products transport model in severe-accident scenarios for Scdap/Relap5

    NASA Astrophysics Data System (ADS)

    Honaiser, Eduardo Henrique Rangel

    The understanding and estimation of the release of fission products during a severe accident became one of the priorities of the nuclear community after 1980, with the events of the Three-mile Island unit 2 (TMI-2), in 1979, and Chernobyl accidents, in 1986. Since this time, theoretical developments and experiments have shown that the primary circuit systems of light water reactors (LWR) have the potential to attenuate the release of fission products, a fact that had been neglected before. An advanced tool, compatible with nuclear thermal-hydraulics integral codes, is developed to predict the retention and physical evolution of the fission products in the primary circuit of LWRs, without considering the chemistry effects. The tool embodies the state-of-the-art models for the involved phenomena as well as develops new models. The capabilities acquired after the implementation of this tool in the Scdap/Relap5 code can be used to increase the accuracy of probability safety assessment (PSA) level 2, enhance the reactor accident management procedures and design new emergency safety features.

  14. A primer on criticality safety

    DOE PAGES

    Costa, David A.; Cournoyer, Michael E.; Merhege, James F.; ...

    2017-05-01

    Criticality is the state of a nuclear chain reacting medium when the chain reaction is just self-sustaining (or critical). Criticality is dependent on nine interrelated parameters. Moreover, we design criticality safety controls in order to constrain these parameters to minimize fissions and maximize neutron leakage and absorption in other materials, which makes criticality more difficult or impossible to achieve. We present the consequences of criticality accidents are discussed, the nine interrelated parameters that combine to affect criticality are described, and criticality safety controls used to minimize the likelihood of a criticality accident are presented.

  15. Actions to Implement the Recommendations of the Presidential Commission on the Space Shuttle Challenger Accident: Executive Summary

    NASA Technical Reports Server (NTRS)

    1986-01-01

    The status of the implementation of the recommendations of the Presidential Commission on the Space Shuttle Challenger Accident is reported. The implementation of recommendations in the following areas is detailed: (1) solid rocket motor design; (2) shuttle management structure, including the shuttle safety panel and astronauts in management; (3) critical item review and hazard analysis; (4) safety organization; (5) improved communication; (6) landing safety; (7) launch abort and crew escape; (8) flight rate; and (9) maintenance safeguards. Supporting memoranda and communications from NASA are appended.

  16. Experimental study of Siphon breaker about size effect in real scale reactor design

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kang, S. H.; Ahn, H. S.; Kim, J. M.

    2012-07-01

    Rupture accident within the pipe of a nuclear reactor is one of the main causes of a loss of coolant accident (LOCA). Siphon-breaking is a passive method that can prevent a LOCA. In this study, either a line or a hole is used as a siphon-breaker, and the effect of various parameters, such as the siphon-breaker size, pipe rupture point, pipe rupture size, and the presence of an orifice, are investigated using an experimental facility similar in size to a full-scale reactor. (authors)

  17. Equivalent Safety Basis for Evaluation of On-Site Packages for US DOE Facilities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, A.C.

    Packages for transport of radioactive material within the boundaries of a Department of Energy facility (on-site) must conform to the requirements for packages shipped in normal commerce, or must provide equivalent safety. Equivalence is achieved if the frequency of severe on-site accidents, which could result in a release of radioactive material, is less than or equal to the frequency of Beyond-HAC accidents for packages in commerce. This is shown to be achieved it the rate of on-site accident is 22 per 100 MVM or lower. For equivalence to Normal Conditions of Transport, for on-site packages, appropriate, defensible Design Basis Conditionsmore » can be established and the ability of the package to meet the reduced requirements shown in the On-site Safety Assessment.« less

  18. Increased incidence of traffic accidents in Toxoplasma-infected military drivers and protective effect RhD molecule revealed by a large-scale prospective cohort study.

    PubMed

    Flegr, Jaroslav; Klose, Jirí; Novotná, Martina; Berenreitterová, Miroslava; Havlícek, Jan

    2009-05-26

    Latent toxoplasmosis, protozoan parasitosis with prevalence rates from 20 to 60% in most populations, is known to impair reaction times in infected subjects, which results, for example, in a higher risk of traffic accidents in subjects with this life-long infection. Two recent studies have reported that RhD-positive subjects, especially RhD heterozygotes, are protected against latent toxoplasmosis-induced impairment of reaction times. In the present study we searched for increased incidence of traffic accidents and for protective effect of RhD positivity in 3890 military drivers. Male draftees who attended the Central Military Hospital in Prague for regular entrance psychological examinations between 2000 and 2003 were tested for Toxoplasma infection and RhD phenotype at the beginning of their 1 to 1.5-year compulsory military service. Subsequently, the data on Toxoplasma infection and RhD phenotype were matched with those on traffic accidents from military police records and the effects of RhD phenotype and Toxoplasma infection on probability of traffic accident was estimated with logistic regression. We confirmed, using for the first time a prospective cohort study design, increased risk of traffic accidents in Toxoplasma-infected subjects and demonstrated a strong protective effect of RhD positivity against the risk of traffic accidents posed by latent toxoplasmosis. Our results show that RhD-negative subjects with high titers of anti-Toxoplasma antibodies had a probability of a traffic accident of about 16.7%, i.e. a more than six times higher rate than Toxoplasma-free or RhD-positive subjects. Our results showed that a common infection by Toxoplasma gondii could have strong impact on the probability of traffic accident in RhD negative subjects. The observed effects could provide not only a clue to the long-standing evolutionary enigma of the origin of RhD polymorphism in humans (the effect of balancing selection), but might also be the missing piece in the puzzle of the physiological function of the RhD molecule.

  19. Increased incidence of traffic accidents in Toxoplasma-infected military drivers and protective effect RhD molecule revealed by a large-scale prospective cohort study

    PubMed Central

    2009-01-01

    Background Latent toxoplasmosis, protozoan parasitosis with prevalence rates from 20 to 60% in most populations, is known to impair reaction times in infected subjects, which results, for example, in a higher risk of traffic accidents in subjects with this life-long infection. Two recent studies have reported that RhD-positive subjects, especially RhD heterozygotes, are protected against latent toxoplasmosis-induced impairment of reaction times. In the present study we searched for increased incidence of traffic accidents and for protective effect of RhD positivity in 3890 military drivers. Methods Male draftees who attended the Central Military Hospital in Prague for regular entrance psychological examinations between 2000 and 2003 were tested for Toxoplasma infection and RhD phenotype at the beginning of their 1 to1.5-year compulsory military service. Subsequently, the data on Toxoplasma infection and RhD phenotype were matched with those on traffic accidents from military police records and the effects of RhD phenotype and Toxoplasma infection on probability of traffic accident was estimated with logistic regression. Results We confirmed, using for the first time a prospective cohort study design, increased risk of traffic accidents in Toxoplasma-infected subjects and demonstrated a strong protective effect of RhD positivity against the risk of traffic accidents posed by latent toxoplasmosis. Our results show that RhD-negative subjects with high titers of anti-Toxoplasma antibodies had a probability of a traffic accident of about 16.7%, i.e. a more than six times higher rate than Toxoplasma-free or RhD-positive subjects. Conclusion Our results showed that a common infection by Toxoplasma gondii could have strong impact on the probability of traffic accident in RhD negative subjects. The observed effects could provide not only a clue to the long-standing evolutionary enigma of the origin of RhD polymorphism in humans (the effect of balancing selection), but might also be the missing piece in the puzzle of the physiological function of the RhD molecule. PMID:19470165

  20. Foreign body aspiration in children.

    PubMed

    Lima, João A B; Fischer, Gilberto Bueno

    2002-12-01

    Foreign body aspiration is a common accident in children and represents an important cause of morbidity and mortality. Diagnosis of this condition demands a high degree of suspicion since physical examination and basic radiology exams have low sensitivity. It is more frequent in children younger than 3 years of age, predominantly boys. Food materials are most commonly involved, particularly peanuts, although this could change according to regional feeding habits. The right main bronchus is the site where foreign bodies are most commonly found. Radiographical findings are not diagnostic, but the presence of unilateral obstructive emphysema or atelectasis are important clues. A rigid endoscopy is indicated whenever there is a suggestive history, since delays in removing foreign bodies can lead to severe bronchial sequelae. In developing countries this type of accident may be more relevant due to the lack of resources and awareness, which can lead to late diagnosis and treatment. Routine preventive measures must be taught to caregivers in order to reduce the incidence. Health care professionals should also be made more aware of the prevalence of this condition.

  1. The scope and specific criteria of compensation for occupational diseases in Korea.

    PubMed

    Song, Jaechul; Kim, Inah; Choi, Byung-Soon

    2014-06-01

    The range of diseases covered by workers' compensation is constantly expanding. However, new regulations are required for the recognition of occupational diseases (ODs) because OD types evolve with changes in industrial structures and working conditions. OD criteria are usually based on medical relevance, but they vary depending on the social security system and laws of each country. In addition, the proposed range and extent of work-relatedness vary depending on the socio-economic conditions of each country. The Labor Standards Act (LSA) and the Industrial Accident Compensation Insurance Act (IACIA) of Korea employ lists based on their requirements without listing causes and diseases separately. Despite a considerable reshuffle in 2003, the basic framework has been maintained for 50 yr, and many cases do not fit into the international disease classification system. Since July 1, 2013, Korea has expanded the range of occupational accidents to include occupational cancers and has implemented revised LSA and IACIA enforcement decrees. There have been improvements to OD recognition standards with the inclusion of additional or modified criteria, a revised and improved classification scheme for risk factors and ODs, and so on.

  2. 76 FR 80829 - Special Conditions: XtremeAir GmbH, XA42; Acrobatic Category Aerodynamic Stability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    ... at the highest level of aerobatic competition. To be competitive, the aircraft was designed with... envelope to accommodate the increased fuel load designed for cross-country operations. The FAA does recognize that fuel exhaustion is one of the top accident causes associated with this class of aircraft. For...

  3. 77 FR 53923 - Biweekly Notice;

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-04

    ... to be publicly disclosed. The NRC posts all comment submissions at http://www.regulations.gov as well... (psig) to 49.7 psig for the design basis loss-of- coolant accident (LOCA). In support of the revised P a... analysis. The P a remains below the containment design pressure of 50 psig because of the change in the...

  4. 75 FR 54918 - Draft Regulatory Guide, DG-1247, “Design-Basis Hurricane and Hurricane Missiles for Nuclear Power...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-09

    ... that the staff uses in evaluating specific problems or postulated accidents, and data that the staff... turbine missiles. NUREG/CR 7004 is the technical basis for regulatory guidance on design-basis hurricane... hurricane wind speeds for new nuclear power plants. [[Page 54919

  5. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... motor vehicles; and non-DOT specification cargo tank motor vehicles equivalent in structural design and...; metal IBCs and non-specification portable tanks equivalent in structural design and accident damage...; Class DOT 106, 110 multi-unit tank car tanks; AAR Class 203W, 206W, 211W tank car tanks; and non-DOT...

  6. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... motor vehicles; and non-DOT specification cargo tank motor vehicles equivalent in structural design and...; metal IBCs and non-specification portable tanks equivalent in structural design and accident damage...; Class DOT 106, 110 multi-unit tank car tanks; AAR Class 203W, 206W, 211W tank car tanks; and non-DOT...

  7. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... motor vehicles; and non-DOT specification cargo tank motor vehicles equivalent in structural design and...; metal IBCs and non-specification portable tanks equivalent in structural design and accident damage...; Class DOT 106, 110 multi-unit tank car tanks; AAR Class 203W, 206W, 211W tank car tanks; and non-DOT...

  8. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... motor vehicles; and non-DOT specification cargo tank motor vehicles equivalent in structural design and...; metal IBCs and non-specification portable tanks equivalent in structural design and accident damage...; Class DOT 106, 110 multi-unit tank car tanks; AAR Class 203W, 206W, 211W tank car tanks; and non-DOT...

  9. Conceptual design study for an advanced cab and visual system, volume 2

    NASA Technical Reports Server (NTRS)

    Rue, R. J.; Cyrus, M. L.; Garnett, T. A.; Nachbor, J. W.; Seery, J. A.; Starr, R. L.

    1980-01-01

    The performance, design, construction and testing requirements are defined for developing an advanced cab and visual system. The rotorcraft system integration simulator is composed of the advanced cab and visual system and the rotorcraft system motion generator, and is part of an existing simulation facility. User's applications for the simulator include rotorcraft design development, product improvement, threat assessment, and accident investigation.

  10. Modeling Post-Accident Vehicle Egress

    DTIC Science & Technology

    2013-01-01

    interest for military situations may involve rolled-over vehicles for which detailed movement data are not available. In the current design process...test trials. These evaluations are expensive and time-consuming, and are often performed late in the design process when it is too difficult to...alter the design if weaknesses are discovered. Yet, due to the limitations of current software tools, digital human models (DHMs) are not yet widely

  11. Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards

    DTIC Science & Technology

    1992-07-01

    Accident Program A combined union/management/ employee program whereby departmental committees work to design health and safety initiatives to attempt to...STANDARDS DING ENGINEERING ATION Survey of Programs Designed To Improve Employee Morale In Seven Major American Shipyards UNITED STATES NAVY David Taylor...4. TITLE AND SUBTITLE Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards 5a. CONTRACT NUMBER 5b. GRANT

  12. [Drug Dependence and Cytotoxicity of Law-evading Drugs: Their Identities Explored from Basic Research].

    PubMed

    Funada, Masahiko

    2016-01-01

      Cases of people experiencing disturbed consciousness or dyspnea, causing traffic accidents, or requiring ambulance transport to hospital due to abuse of law-evading chemical substances have become a serious social problem in Japan. Most law-evading herbal products are marketed as incense or herbs and consist of finely chopped, dry vegetative matter mixed with chemical substances (drugs). Analysis of the chemical substances in these herbal products has demonstrated that they contain synthetic cannabinoids. Because there are many cannabinoid compounds, even if a particular drug is regulated, similar compounds that differ only slightly in structure may be added in their place. Therefore a cat-and-mouse game exists between regulations on chemical substances and their propagation. This paper summarizes the pharmacological actions and dangers of chemical substances contained in law-evading herbal products by focusing on synthetic cannabinoids, as a group of chemical substances contained in these products. Furthermore, comprehensive designations of synthetic cannabinoids have been introduced as a new method of regulation that emphasizes the similarity of chemical structures; this paper also outlines the comprehensive designations. We established a psychic-dependence liability and cytotoxicity screening system for synthetic cannabinoids using animals (behavioral analysis in vivo) and cell cultures (cytotoxicity analysis in vitro). With our drug-screening system, we were able rapidly to evaluate and quantify psychic-dependence liabilities and cytotoxicity of synthetic cannabinoids contained in law-evading herbal products. These scientific data using our screening system contributed to the establishment of legislation for comprehensive designations of synthetic cannabinoids.

  13. EMERALD REV.1. PWR Accident Activity Release

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brunot, W.K.; Fray, R.R.; Gillespie, S.G.

    1975-10-01

    The EMERALD program is designed for the calculation of radiation releases and exposures resulting from abnormal operation of a large pressurized water reactor (PWR). The approach used in EMERALD is similar to an analog simulation of a real system. Each component or volume in the plant which contains a radioactive material is represented by a subroutine which keeps track of the production, transfer, decay and absorption of radioactivity in that volume. During the course of the analysis of an accident, activity is transferred from subroutine to subroutine in the program as it would be transferred from place to place inmore » the plant. For example, in the calculation of the doses resulting from a loss-of-coolant accident the program first calculates the activity built up in the fuel before the accident, then releases some of this activity to the containment volume. Some of this activity is then released to the atmosphere. The rates of transfer, leakage, production, cleanup, decay, and release are read in as input to the program. Subroutines are also included which calculate the on-site and off-site radiation exposures at various distances for individual isotopes and sums of isotopes. The program contains a library of physical data for the twenty-five isotopes of most interest in licensing calculations, and other isotopes can be added or substituted. Because of the flexible nature of the simulation approach, the EMERALD program can be used for most calculations involving the production and release of radioactive materials during abnormal operation of a PWR. These include design, operational, and licensing studies.« less

  14. [Trampoline therapy with brain-injured children and adolescents (author's transl)].

    PubMed

    Erichsen, H; Böttcher, H

    1976-05-01

    Trampoline therapy is a useful part of the medical rehabilitation treatment of brain-injured children and adolescents, if the basic principles of accident prevention are observed. The therapy should only consist of systematically organised exercise series and be carried out by adequately trained sport teachers, medical paedagogues or physical therapists. In the "Jugendwerk Gailingen" an improvement of the standing balance and movement co-ordination was achieved in more than 20 patients with hemiparesis and tetraparesis. Only little progress was achieved in atactic and athetoid patients. It is important to stress the positive psychological effects of the trampoline therapy.

  15. Assessment of Driver's Reaction Times in Diverisified Research Environments

    NASA Astrophysics Data System (ADS)

    Guzek, Marek; Lozia, Zbigniew; Zdanowicz, Piotr; Jurecki, Rafał S.; Stańczyk, Tomasz L.; Pieniążek, Wiesław

    2012-06-01

    Reaction time is one of the basic parameters that characterize the driver and very important in the analysis of accident situations in road traffic. This paper describes research studies on the reaction time evaluation as conducted in three environments: on a typical device used in the transport psychology labs (the so-called reflexometer), in the driving simulator (autoPW) and on the driving test track (the Kielce Test Track). In all environments, the tests were performed for the same group of drivers. The article presents the characteristics of research in each environment as well as shows and compares exemplary results.

  16. Pilot Designed Aircraft Displays in General Aviation: An Exploratory Study and Analysis

    NASA Astrophysics Data System (ADS)

    Conaway, Cody R.

    From 2001-2011, the General Aviation (GA) fatal accident rate remained unchanged (Duquette & Dorr, 2014) with an overall stagnant accident rate between 2004 and 2013. The leading cause, loss of control in flight (NTSB, 2015b & 2015c) due to pilot inability to recognize approach to stall/spin conditions (NTSB, 2015b & 2016b). In 2013, there were 1,224 GA accidents in the U.S., accounting for 94% of all U.S. aviation accidents and 90% of all U.S. aviation fatalities that year (NTSB, 2015c). Aviation entails multiple challenges for pilots related to task management, procedural errors, perceptual distortions, and cognitive discrepancies. While machine errors in airplanes have continued to decrease over the years, human error still has not (NTSB, 2013). A preliminary analysis of a PC-based, Garmin G1000 flight deck was conducted with 3 professional pilots. Analyses revealed increased task load, opportunities for distraction, confusing perceptual ques, and hindered cognitive performance. Complex usage problems were deeply ingrained in the functionality of the system, forcing pilots to use fallible work arounds, add unnecessary steps, and memorize knob turns or button pushes. Modern computing now has the potential to free GA cockpit designs from knobs, soft keys, or limited display options. Dynamic digital displays might include changes in instrumentation or menu structuring depending on the phase of flight. Airspeed indicators could increase in size to become more salient during landing, simultaneously highlighting pitch angle on Attitude Indicators and automatically decluttering unnecessary information for landing. Likewise, Angle-of-Attack indicators demonstrate a great safety and performance advantage for pilots (Duquette & Dorr, 2014; NTSB, 2015b & 2016b), an instrument typically found in military platforms and now the Icon A5, light-sport aircraft (Icon, 2016). How does the design of pilots' environment---the cockpit---further influence their efficiency and effectiveness? To explore the possibilities for small aircraft displays, a participatory design investigation was conducted with 9 qualified instrument pilots. Aviators designed mock cockpits on a PC using pictorial cutouts of analog (e.g., mechanical dials) and digital (e.g., dynamic displays) controls. Data was analyzed qualitatively and compared to similar work. Finally, a template for GA displays was developed based on pilot input.

  17. Predicting and analyzing the trend of traffic accidents deaths in Iran in 2014 and 2015

    PubMed Central

    Mehmandar, Mohammadreza; Soori, Hamid; Mehrabi, Yadolah

    2016-01-01

    Background: Predicting the trend in traffic accidents deaths and its analysis can be a useful tool for planning and policy-making, conducting interventions appropriate with death trend, and taking the necessary actions required for controlling and preventing future occurrences. Objective: Predicting and analyzing the trend of traffic accidents deaths in Iran in 2014 and 2015. Settings and Design: It was a cross-sectional study. Materials and Methods: All the information related to fatal traffic accidents available in the database of Iran Legal Medicine Organization from 2004 to the end of 2013 were used to determine the change points (multi-variable time series analysis). Using autoregressive integrated moving average (ARIMA) model, traffic accidents death rates were predicted for 2014 and 2015, and a comparison was made between this rate and the predicted value in order to determine the efficiency of the model. Results: From the results, the actual death rate in 2014 was almost similar to that recorded for this year, while in 2015 there was a decrease compared with the previous year (2014) for all the months. A maximum value of 41% was also predicted for the months of January and February, 2015. Conclusion: From the prediction and analysis of the death trends, proper application and continuous use of the intervention conducted in the previous years for road safety improvement, motor vehicle safety improvement, particularly training and culture-fostering interventions, as well as approval and execution of deterrent regulations for changing the organizational behaviors, can significantly decrease the loss caused by traffic accidents. PMID:27308255

  18. Stabilized Approach Criteria: Bridging the Gap Between Theory and Practice

    NASA Technical Reports Server (NTRS)

    Zaal, Petrus M.

    2018-01-01

    Approach and landing is the most common phase of flight for aviation accidents, accounting annually for approximately 65 percent of all accidents. A Flight Safety Foundation study of 16 years of runway excursions determined that 83 percent could have been avoided with a decision to go around. In other words, 54 percent of all accidents could potentially be prevented by going around. A critical industry policy designed to help prevent such accidents is the go-around policy. However, the collective industry performance of complying with go-around policies is extremely poor and only about three percent of unstable approaches result in a go-around. Improving the go-around compliance rate holds tremendous potential in reducing approach and landing accidents. There are many reasons for flight crews ignoring go-around policies related to pilot judgement and company policies. Examples are the collective industry norm to accept the noncompliance of go-around policies, management being disengaged from go-around noncompliance, and pilot fatigue and lack of situational awareness. One of the biggest factors is that pilots see current stabilized-approach criteria as too complex and restrictive for the operational environment. Following the American Airlines 1420 accident (Little Rock, 1999), where the aircraft overran the runway upon landing and crashed, the National Transportation Safety Board (NTSB) recommended that the Federal Aviation Administration (FAA) define detailed parameters for a stabilized approach, and develop detailed criteria indicating when a go-around should be performed. The experiment discussed in this presentation is the first step towards developing these go-around criteria for commercial transport aircraft.

  19. Carrier rockets

    NASA Astrophysics Data System (ADS)

    Aleksandrov, V. A.; Vladimirov, V. V.; Dmitriev, R. D.; Osipov, S. O.

    This book takes into consideration domestic and foreign developments related to launch vehicles. General information concerning launch vehicle systems is presented, taking into account details of rocket structure, basic design considerations, and a number of specific Soviet and American launch vehicles. The basic theory of reaction propulsion is discussed, giving attention to physical foundations, the various types of forces acting on a rocket in flight, basic parameters characterizing rocket motion, the effectiveness of various approaches to obtain the desired velocity, and rocket propellants. Basic questions concerning the classification of launch vehicles are considered along with construction and design considerations, aspects of vehicle control, reliability, construction technology, and details of structural design. Attention is also given to details of rocket motor design, the basic systems of the carrier rocket, and questions of carrier rocket development.

  20. AP1000{sup R} severe accident features and post-Fukushima considerations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Scobel, J. H.; Schulz, T. L.; Williams, M. G.

    2012-07-01

    The AP1000{sup R} passive nuclear power plant is uniquely equipped to withstand an extended station blackout scenario such as the events following the earthquake and tsunami at Fukushima without compromising core and containment integrity. The AP1000 plant shuts down the reactor, cools the core, containment and spent fuel pool for more than 3 days using passive systems that do not require AC or DC power or operator actions. Following this passive coping period, minimal operator actions are needed to extend the operation of the passive features to 7 days using installed equipment. To provide defense-in-depth for design extension conditions, themore » AP1000 plant has engineered features that mitigate the effects of core damage. Engineered features retain damaged core debris within the reactor vessel as a key feature. Other aspects of the design protect containment integrity during severe accidents, including unique features of the AP1000 design relative to passive containment cooling with water and air, and hydrogen management. (authors)« less

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top